OEXP exploration studies technical report. Volume 3: Special reports, studies, and indepth systems assessments

NASA Technical Reports Server (NTRS)

Roberts, Barney B.; Bland, Dan

1988-01-01

The Office of Exploration (OEXP) at NASA has been tasked with defining and recommending alternatives for an early 1990's national decision on a focused program of manned exploration of the Solar System. The Mission analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report, produced by the MASE, describes the process used to conduct exploration studies and discusses the mission developed in a case study approach. The four case studies developed in FY88 include: (1) a manned expedition to PHOBOS; (2) a manned expedition to MARS; (3) a lunar surface observatory; and a lunar outpost to early Mars evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work.

Office of Exploration: Exploration studies technical report. Volume 2: Studies approach and results

NASA Technical Reports Server (NTRS)

Roberts, Barney B.; Bland, Dan

1988-01-01

The NASA Office of Exploration has been tasked with defining and recommending alternatives for an early 1990's national decision on a focused program of human exploration of the solar system. The Mission Analysis and System Engineering (MASE) group, which is managed by the Exploration Studies Office at the Johnson Space Center, is responsible for coordinating the technical studies necessary for accomplishing such a task. This technical report describes the process that has been developed in a case study approach. The four case studies that were developed in FY88 include: (1) human expedition to Phobos; (2) human expeditions to Mars; (3) lunar observatory; and (4) lunar outpost to early Mars evolution. The final outcome of this effort is a set of programmatic and technical conclusions and recommendations for the following year's work. Volume 2 describes the case study process, the technical results of each of the case studies, and opportunities for additional study. Included in the discussion of each case study is a description of the mission key features and profile. Mission definition and manifesting are detailed, followed by a description of the mission architecture and infrastructure. Systems concepts for the required orbital nodes, transportation systems, and planetary surface systems are discussed. Prerequisite implementation plans resulting from the synthesized case studies are described and in-depth assessments are presented.

NASA Aerospace Flight Battery Program: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements. Volume 2/Part 2

NASA Technical Reports Server (NTRS)

Jung, David S.; Manzo, Michelle A.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 2 - Volume II Appendix A to Part 2 - Volume I.

Space station systems technology study (add-on task). Volume 3: Technology advancement program plan

NASA Technical Reports Server (NTRS)

1985-01-01

Program plans are given for an integrating controller for space station autonomy as well as for controls and displays. The technical approach, facility requirements and candidate facilities, development schedules, and resource requirements estimates are given.

Human Performance in Continuous Operations. Volume 3. Technical Documentation

DTIC Science & Technology

1980-03-01

completed for the U. S. Commander, V Corps. Artillery, by Manning (1978). Manning collected information which bears on the following three questions: 0 Can...performance data were not collected in these pre- liminary studies. Field Studies of Continuous Tank OperationsLI __ _ _ __ _ _ _ To simulate a combat...on routine, monotonous tasks tends A show rapid and severe decrement after peri- odk of more than 24 hours without sleep. I Increasing task complexity

Space and Earth Sciences, Computer Systems, and Scientific Data Analysis Support, Volume 1

NASA Technical Reports Server (NTRS)

Estes, Ronald H. (Editor)

1993-01-01

This Final Progress Report covers the specific technical activities of Hughes STX Corporation for the last contract triannual period of 1 June through 30 Sep. 1993, in support of assigned task activities at Goddard Space Flight Center (GSFC). It also provides a brief summary of work throughout the contract period of performance on each active task. Technical activity is presented in Volume 1, while financial and level-of-effort data is presented in Volume 2. Technical support was provided to all Division and Laboratories of Goddard's Space Sciences and Earth Sciences Directorates. Types of support include: scientific programming, systems programming, computer management, mission planning, scientific investigation, data analysis, data processing, data base creation and maintenance, instrumentation development, and management services. Mission and instruments supported include: ROSAT, Astro-D, BBXRT, XTE, AXAF, GRO, COBE, WIND, UIT, SMM, STIS, HEIDI, DE, URAP, CRRES, Voyagers, ISEE, San Marco, LAGEOS, TOPEX/Poseidon, Pioneer-Venus, Galileo, Cassini, Nimbus-7/TOMS, Meteor-3/TOMS, FIFE, BOREAS, TRMM, AVHRR, and Landsat. Accomplishments include: development of computing programs for mission science and data analysis, supercomputer applications support, computer network support, computational upgrades for data archival and analysis centers, end-to-end management for mission data flow, scientific modeling and results in the fields of space and Earth physics, planning and design of GSFC VO DAAC and VO IMS, fabrication, assembly, and testing of mission instrumentation, and design of mission operations center.

Conversion of the TRACON operations concepts database into a formal sentence outline job task taxonomy.

DOT National Transportation Integrated Search

1995-05-01

FAA Air Traffic Control Operations Concepts Volume VII.- TRACON Controllers (1989) developed by CTA, Inc., a technical description of the duties of a TRACON air traffic control specialist (ATCS), formatted in User Interface Language, was restructured...

Advanced Inertial Technologies. Volume 3

DTIC Science & Technology

1975-06-01

carried out under all of the technical tasks by means of publication of reports, presentation of papers , attendance at symposia, etc., this task is...sputter deposition by conventional RF sputter techniques. This choice was indicated by past experience on other programs show- ing that solid spherical...through R3 are source resistors for th« op cimp LPF and, as such, are inversely proportional to gain. Equation (4-4) n.ust be solved by iteration

Materials experiment carrier concepts definition study. Volume 2: Technical report, part 2

NASA Technical Reports Server (NTRS)

1981-01-01

A materials experiment carrier (MEC) that provides effective accommodation of the given baseline materials processing in space (MPS) payloads and demonstration of the MPS platform concept for high priority materials processing science, multidiscipline MPS investigations, host carrier for commercial MPS payloads, and system economy of orbital operations is defined. The study flow of task work is shown. Study tasks featured analysis and trades to identify the MEC system concept options.

Space station automation study. Volume 2: Technical report. Autonomous systems and assembly

NASA Technical Reports Server (NTRS)

1984-01-01

The application of automation to space station functions is discussed. A summary is given of the evolutionary functions associated with long range missions and objectives. Mission tasks and requirements are defined. Space station sub-systems, mission models, assembly, and construction are discussed.

Run-Off-Road Collision Avoidance Countermeasures Using IVHS Countermeasures, Task 1, Volume 1: Technical Findings, Final Report

DOT National Transportation Integrated Search

1994-10-01

THE RUN-OFF-ROAD COLLISION AVOIDANCE USING IVHS COUNTERMEASURES PROGRAM IS TO ADDRESS THE SINGLE VEHICLE CRASH PROBLEM THROUGH APPLICATION OF TECHNOLOGY TO PREVENT AND/OR REDUCE THE SEVERITY OF THESE CRASHES. : THIS REPORT DESCRIBES AND DOCUMENTS ...

Run-Off-Road Collision Avoidance Countermeasures Using IVHS Countermeasures, Task 2, Volume 1: Technical Findings, Final Report

DOT National Transportation Integrated Search

1995-06-01

THE RUN-OFF-ROAD COLLISION AVOIDANCE USING IVHS COUNTERMEASURES PROGRAM IS TO ADDRESS THE SINGLE VEHICLE CRASH PROBLEM THROUGH APPLICATION OF TECHNOLOGY TO PREVENT AND/OR REDUCE THE SEVERITY OF THESE CRASHES. : THIS REPORT DESCRIBES AND DOCUMENTS ...

Controller Evaluation of Initial Data Link Air Traffic Control Services, Mini Study 1, Volume 1

DOT National Transportation Integrated Search

1988-09-01

This report details the results of Mini Study 1. This mini study was conducted : at the Federal Aviation (FAA) Technical Center utilizing the Data Link testbed. : Initial Data Link air traffic control services were under part task simulation : condit...

Georgetown University Integrated Community Energy System (GU-ICES). Phase III, Stage I. Feasibility analysis. Final report. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This Feasibility Analysis covers a wide range of studies and evaluations. The Report is divided into five parts. Section 1 contains all material relating to the Institutional Assessment including consideration of the requirements and position of the Potomac Electric Co. as they relate to cogeneration at Georgetown in parallel with the utility (Task 1). Sections 2 through 7 contain all technical information relating to the Alternative Subsystems Analysis (Task 4). This includes the energy demand profiles upon which the evaluations were based (Task 3). It further includes the results of the Life-Cycle-Cost Analyses (Task 5) which are developed in detailmore » in the Appendix for evaluation in the Technical Report. Also included is the material relating to Incremental Savings and Optimization (Task 6) and the Conceptual Design for candidate alternate subsystems (Task 7). Section 8 contains all material relating to the Environmental Impact Assessment (Task 2). The Appendix contains supplementary material including the budget cost estimates used in the life-cycle-cost analyses, the basic assumptions upon which the life-cycle analyses were developed, and the detailed life-cycle-cost anlysis for each subsystem considered in detail.« less

Conversion of the CTA, Inc., en route operations concepts database into a formal sentence outline job task taxonomy.

DOT National Transportation Integrated Search

1993-01-01

FAA Air Traffic Control Operations Concepts Volume VI: ARTCC-Host En Route Controllers (1990) developed by CTA, Inc., a technical description of the duties of an En Route air traffic control specialist (ATCS), formatted in User Interface Language, wa...

Technical Support Task Report for the Modernization of Defense Logistics Standard Systems. Volume 3: Logistics Gateway Node Technical Specifications

DTIC Science & Technology

1991-05-01

or may not bypass the editing function. At present, editing rules beyond those required for translation have not been stipulated. 2When explicit... editing rules become defined, the editor at a site LGN may perform two levels of edit checking: warning, which would insert blanks or pass as submitted...position image transactions into a transaction set. This low-level edit checking is performed at the site LGN to reduce transmission costs and to

Shuttle payload interface verification equipment study. Volume 2: Technical document, part 1

NASA Technical Reports Server (NTRS)

1976-01-01

The technical analysis is reported that was performed during the shuttle payload interface verification equipment study. It describes: (1) the background and intent of the study; (2) study approach and philosophy covering all facets of shuttle payload/cargo integration; (3)shuttle payload integration requirements; (4) preliminary design of the horizontal IVE; (5) vertical IVE concept; and (6) IVE program development plans, schedule and cost. Also included is a payload integration analysis task to identify potential uses in addition to payload interface verification.

An Investigation of Technologies for Hazardous Sludge Reduction at AFLC (Air Force Logistics Command) Industrial Waste Treatment Plants. Volume 1. Sodium Borohydride Treatment and Sludge Handling Technologies.

DTIC Science & Technology

1983-12-01

ql.udge treatment studies, and preparation of preliminary designs . First Lieutenant James Aldrich was the RDV Project Officer. This technical report has...METAL REMOVA STUDY.. . .. .. .. . . .. 51 VI INVESTIGATING SLUDGE TREATMENT TECHNOLOGIES . 76 VII PROTOTYPE DESIGNS . . . . . . . . . . . . . . 98 viii...Task V was directed at developing basic design and cost data for prototype systems that employ the most promising methods developed under Tasks III and

Scoping risk assessment protection against oil spills in the marine waters of northwest Washington State, volume 2. technical appendices

DOT National Transportation Integrated Search

1997-07-18

On April 28, 1996 the White House issued the Department of Transportation (DOT) : Action Plan to Address Vessel and Environmental Safety in Puget Sound-Area Waters. : The Action Plan outlines several related tasks, the first stage of which was to : r...

Graphic Arts: Process Camera, Stripping, and Platemaking. Teacher Guide.

ERIC Educational Resources Information Center

Feasley, Sue C., Ed.

This curriculum guide is the second in a three-volume series of instructional materials for competency-based graphic arts instruction. Each publication is designed to include the technical content and tasks necessary for a student to be employed in an entry-level graphic arts occupation. Introductory materials include an instructional/task…

Task Analysis and Job Descriptions for Robotics/Automated Systems Technicians. Final Report. Volume 1.

ERIC Educational Resources Information Center

Hull, Daniel M.; Lovett, James E.

The Robotics/Automated Systems Technician (RAST) project developed a robotics technician model curriculum for the use of state directors of vocational education and two-year college vocational/technical educators. A baseline management plan was developed to guide the project. To provide awareness, project staff developed a dissemination plan…

NASA Aerospace Flight Battery Program: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries; Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries; Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop). Volume 1, Part 1

NASA Technical Reports Server (NTRS)

Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 1 - Volume I: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries, Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries, and Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop).

Cost Study of Educational Media Systems and Their Equipment Components. Volume II, Technical Report. Final Report.

ERIC Educational Resources Information Center

General Learning Corp., Washington, DC.

A common instructional task and a set of educational environments are hypothesized for analysis of media cost data. The analytic structure may be conceptulized as a three-dimensional matrix: the first vector separates costs into production, distribution, and reception; the second vector delineates capital (initial) and operating (annual) costs;…

Study of the Economic and Rehabilitative Aspects of Prison Industry. Technical Tasks and Results.

ERIC Educational Resources Information Center

National Inst. of Law Enforcement and Criminal Justice (Dept. of Justice/LEAA), Washington, DC.

This volume analyzes existing and proposed correctional industries in Connecticut. First, the results of a survey made to determine the potential inmate work force for prison industry are presented as inmate profiles, descriptions of inmate and supervisor attitudes, and analyses of parolees' employment and recidivism rates. In part 2, four…

Technology assessment of future intercity passenger transporation systems. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

1976-01-01

Technical, economic, environmental, and sociopolitical issues associated with future intercity transportation system options were assured. Technology assessment was used as a tool to assist in the identification of basic research and technology development tasks that should be undertaken. The emphasis was on domestic passenger transportation, but interfaces with freight and international transportation were considered.

Feasibility study of modern airships, phase 1. Volume 3: Historical overview (task 1)

NASA Technical Reports Server (NTRS)

Faurote, G. L.

1975-01-01

The history of lighter-than-air vehicles is reviewed in terms of providing a background for the mission analysis and parametric analysis tasks. Data from past airships and airship operations are presented in the following areas: (1) parameterization of design characteristics; (2) markets, missions, costs, and operating procedures, (3) indices of efficiency for comparison; (4) identification of critical design and operational characteristics; and (5) definition of the 1930 state-of-the-art and the 1974 state-of-the-art from a technical and economic standpoint.

Space Tug Docking Study. Volume 5: Cost Analysis

NASA Technical Reports Server (NTRS)

1976-01-01

The cost methodology, summary cost data, resulting cost estimates by Work Breakdown Structure (WBS), technical characteristics data, program funding schedules and the WBS for the costing are discussed. Cost estimates for two tasks of the study are reported. The first, developed cost estimates for design, development, test and evaluation (DDT&E) and theoretical first unit (TFU) at the component level (Level 7) for all items reported in the data base. Task B developed total subsystem DDT&E costs and funding schedules for the three candidate Rendezvous and Docking Systems: manual, autonomous, and hybrid.

Entrained-flow gasification at elevated pressure: Volume 1: Final technical report, March 1, 1985-April 30,1987

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hedman, P.O.; Smoot, L.D.; Smith, P.J.

1987-10-15

The general purpose of this research program was to develop a basic understanding of the physical and chemical processes in entrained coal gasification and to use the results to improve and evaluate an entrained gasification computer model. The first task included the collection and analysis of in-situ gasifier data at elevated pressures with three coal types (North Dakota lignite, Wyoming subbituminous and Illinois bituminous), the design, construction, and testing of new coal/oxygen/steam injectors with a fourth coal type (Utah bituminous), the collection of supporting turbulent fluid dynamic (LDV) data from cold-flow studies, and the investigation of the feasibility of usingmore » laser-based (CARS) daignostic instruments to make measurements in coal flames. The second task included improvements to the two-dimensional gasifier submodels, tabulation and evaluation of new coal devolatilization and char oxidation data for predictions, fundamental studies of turbulent particle dispersion, the development of improved numerical methods, and validation of the comprehensive model through comparison of predictions with experimental results. The third task was to transfer technical advances to industry and to METC through technical seminars, production of a detailed data book, code placement, and publication of results. Research results for these three tasks are summarized briefly here and presented in detail in the body of the report and in supporting references. 202 refs., 73 figs., 23 tabs.« less

Seven Experiment Designs Addressing Problems of Safety and Capacity on Two-Lane Rural Highways : Volume 7. Experimental Design to Develop and Evaluate Measures for Reducing the Effects of Roadside Friction on Traffic Flow

DOT National Transportation Integrated Search

1994-04-01

This operational test case study is one of six performed in response to a Volpe National Transportation Systems Center technical task directive (TTD) to Science Applications International Corporation (SAIC) entitled, "IVHS Institutional Issues and Ca...

Seven Experiment Designs Addressing Problems of Safety and Capacity on Two-Lane Rural Highways : Volume 4. Experimental Design to Develop and Evaluate Remedial Aids to Urban Drivers of Slow Moving Vehicles on a Grade

DOT National Transportation Integrated Search

1994-04-01

This operational test case study is one of six performed in response to a Volpe National Transportation Systems Center technical task directive (TTD) to Science Applications International Corporation (SAIC) entitled, IVHS Institutional Issues and ...

Development of Ultra-Efficient Electric Motors Final Technical Report Covering work from April 2002 through September 2007

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rich Schiferl

2008-05-30

High temperature superconducting (HTS) motors offer the potential for dramatic volume and loss reduction compared to conventional, high horspower, industrial motors. This report is the final report on the results of eight research tasks that address some of the issues related to HTS motor development that affect motor efficiency, cost, and reliability.

Analysis of nuclear waste disposal in space, phase 3. Volume 1: Executive summary of technical report

NASA Technical Reports Server (NTRS)

Rice, E. E.; Miller, N. E.; Yates, K. R.; Martin, W. E.; Friedlander, A. L.

1980-01-01

The objectives, approach, assumptions, and limitations of a study of nuclear waste disposal in space are discussed with emphasis on the following: (1) payload characterization; (2) safety assessment; (3) health effects assessment; (4) long-term risk assessment; and (5) program planning support to NASA and DOE. Conclusions are presented for each task.

Cost Estimation Model for Alternative Formats and Delivery Modes. Technical Report No. 10.

ERIC Educational Resources Information Center

Bramble, William J.; And Others

The Appalachian Education Satellite Project (AESP) was designed to apply communications satellite technology to the task of improving the quality of education in Appalachia. This report is the 10th in a 12 volume series. To justify the cost of using the satellite method, a cost model was developed. This cost model provided information on: (1) the…

A study of space station needs, attributes, and architectural options, volume 2, technical. Book 2: Mission implementation concepts

NASA Technical Reports Server (NTRS)

1983-01-01

Space station systems characteristics and architecture are described. A manned space station operational analysis is performed to determine crew size, crew task complexity and time tables, and crew equipment to support the definition of systems and subsystems concepts. This analysis is used to select and evaluate the architectural options for development.

A shuttle and space station manipulator system for assembly, docking, maintenance, cargo handling and spacecraft retrieval (preliminary design). Volume 3: Concept analysis. Part 1: Technical

NASA Technical Reports Server (NTRS)

1972-01-01

Information backing up the key features of the manipulator system concept and detailed technical information on the subsystems are presented. Space station assembly and shuttle cargo handling tasks are emphasized in the concept analysis because they involve shuttle berthing, transferring the manipulator boom between shuttle and station, station assembly, and cargo handling. Emphasis is also placed on maximizing commonality in the system areas of manipulator booms, general purpose end effectors, control and display, data processing, telemetry, dedicated computers, and control station design.

Evaluation of nonmetallic thermal protection materials for the manned space shuttle. Volume 1, task 1: Assessment of technical risks associated with utilization of nonmetallic thermal protection system

NASA Technical Reports Server (NTRS)

Wilkinson, W. H.; Kirkhart, F. P.; Kistler, C. W.; Duckworth, W. H.; Ungar, E. W.; Foster, E. L.

1970-01-01

Technical problems of design and flight qualification of the proposed classes of surface insulation materials and leading edge materials were reviewed. A screening test plan, a preliminary design data test plan and a design data test plan were outlined. This program defined the apparent critical differences between the surface insulators and the leading edge materials, structuring specialized screening test plans for each of these two classes of materials. Unique testing techniques were shown to be important in evaluating the structural interaction aspects of the surface insulators and a separate task was defined to validate the test plan. In addition, a compilation was made of available information on proposed material (including metallic TPS), previous shuttle programs, pertinent test procedures, and other national programs of merit. This material was collected and summarized in an informally structured workbook.

Northeast Artificial Intelligence Consortium (NAIC) Review of Technical Tasks. Volume 2, Part 1.

DTIC Science & Technology

1987-07-01

34- . 6.2 Transformation Invariant Attributes for S Digitized Object Outlines ................................. 469 6.3 Design of an Inference Engine for an...Attributes for Digital Object Outlines ...................................... 597 7 SPEECH UNDERSTANDING RESEARCH ( Rochester Institute of Technology...versatile maintenance expert system ES) for trouble-shooting--’ digital circuits. +" Some diagnosis systems, such as MYCLN [19] for medical diagnosis and CRIB

Toxic Hazards Research Unit. Annual Technical Report. 1978

DTIC Science & Technology

1978-08-01

determinations made for the following battery of clinical tests: HCT Bilirubin RBC Glucose WBC Triglycerides HGB Iron Alkaline Sedimentation Phosphatase Rate ...Count WBC Hematocrit HCT Hemoglobin HGB Sedimentation Rate SEDI Reticulocytes RETIC MCORP Mean Corpuscular Volume MCV Mean Corpuscular Hemoglobin MCH...Contract F33615-76-C-5005 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PPOGPAM ELEMENT, PROJECT , TASK University of California, Irvine APEA A WORK UNIT

Cortical Thickness, Surface Area and Subcortical Volume Differentially Contribute to Cognitive Heterogeneity in Parkinson's Disease.

PubMed

Gerrits, Niels J H M; van Loenhoud, Anita C; van den Berg, Stan F; Berendse, Henk W; Foncke, Elisabeth M J; Klein, Martin; Stoffers, Diederick; van der Werf, Ysbrand D; van den Heuvel, Odile A

2016-01-01

Parkinson's disease (PD) is often associated with cognitive deficits, although their severity varies considerably between patients. Recently, we used voxel-based morphometry (VBM) to show that individual differences in gray matter (GM) volume relate to cognitive heterogeneity in PD. VBM does, however, not differentiate between cortical thickness (CTh) and surface area (SA), which might be independently affected in PD. We therefore re-analyzed our cohort using the surface-based method FreeSurfer, and investigated (i) CTh, SA, and (sub)cortical GM volume differences between 93 PD patients and 45 matched controls, and (ii) the relation between these structural measures and cognitive performance on six neuropsychological tasks within the PD group. We found cortical thinning in PD patients in the left pericalcarine gyrus, extending to cuneus, precuneus and lingual areas and left inferior parietal cortex, bilateral rostral middle frontal cortex, and right cuneus, and increased cortical surface area in the left pars triangularis. Within the PD group, we found negative correlations between (i) CTh of occipital areas and performance on a verbal memory task, (ii) SA and volume of the frontal cortex and visuospatial memory performance, and, (iii) volume of the right thalamus and scores on two verbal fluency tasks. Our primary findings illustrate that i) CTh and SA are differentially affected in PD, and ii) VBM and FreeSurfer yield non-overlapping results in an identical dataset. We argue that this discrepancy is due to technical differences and the subtlety of the PD-related structural changes.

Feasibility of developing a portable driver performance data acquisition system for human factors research: Technical tasks. Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carter, R.J.; Barickman, F.S.; Spelt, P.F.

1998-01-01

A two-phase, multi-year research program entitled ``development of a portable driver performance data acquisition system for human factors research`` was recently completed. The primary objective of the project was to develop a portable data acquisition system for crash avoidance research (DASCAR) that will allow drive performance data to be collected using a large variety of vehicle types and that would be capable of being installed on a given vehicle type within a relatively short-time frame. During phase 1 a feasibility study for designing and fabricating DASCAR was conducted. In phase 2 of the research DASCAR was actually developed and validated.more » This technical memorandum documents the results from the feasibility study. It is subdivided into three volumes. Volume one (this report) addresses the last five items in the phase 1 research and the first issue in the second phase of the project. Volumes two and three present the related appendices, and the design specifications developed for DASCAR respectively. The six tasks were oriented toward: identifying parameters and measures; identifying analysis tools and methods; identifying measurement techniques and state-of-the-art hardware and software; developing design requirements and specifications; determining the cost of one or more copies of the proposed data acquisition system; and designing a development plan and constructing DASCAR. This report also covers: the background to the program; the requirements for the project; micro camera testing; heat load calculations for the DASCAR instrumentation package in automobile trunks; phase 2 of the research; the DASCAR hardware and software delivered to the National Highway Traffic Safety Administration; and crash avoidance problems that can be addressed by DASCAR.« less

Mineralogical conversion of asbestos containing materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pulsford, S.K.; Foltz, A.D.; Ek, R.B.

The principal objective of the Technical Task Plan (TTP) is to demonstrate a thermal-chemical mineralogical asbestos conversion unit at the Hanford Site, which converts non-radiological asbestos containing materials (ACMs) into an asbestos-free material. The permanent thermal-chemical mineralogical conversion of ACMs to a non-toxic, non-hazardous, potentially marketable end product should not only significantly reduce the waste stream volumes but terminate the {open_quotes}cradle to grave{close_quotes} ownership liabilities.

Worldwide Buoy Technology Survey. Volume 2. Appendix B. Buoy Records. Book 2. Germany - USA

DTIC Science & Technology

1991-02-01

arrangement and effectiveness of the complete system could not be addressed in detail within the constraints of this project. In an overall evaluation of...the SRA system , such considerations should also be addressed. The USCG’s Waterway Analysis and Management System (WAMS) is considering this matter as...project. The task includes the screening of worldwide engineering and technical information on buoy systems , approaches to problem solving (particularly

Space station System Engineering and Integration (SE and I). Volume 2: Study results

NASA Technical Reports Server (NTRS)

1987-01-01

A summary of significant study results that are products of the Phase B conceptual design task are contained. Major elements are addressed. Study results applicable to each major element or area of design are summarized and included where appropriate. Areas addressed include: system engineering and integration; customer accommodations; test and program verification; product assurance; conceptual design; operations and planning; technical and management information system (TMIS); and advanced development.

Fluid Vessel Quantity using Non-Invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

NASA Technical Reports Server (NTRS)

Garofalo, Anthony A.

2013-01-01

The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

Fluid Vessel Quantity Using Non-invasive PZT Technology Flight Volume Measurements Under Zero G Analysis

NASA Technical Reports Server (NTRS)

Garofalo, Anthony A

2013-01-01

The purpose of the project is to perform analysis of data using the Systems Engineering Educational Discovery (SEED) program data from 2011 and 2012 Fluid Vessel Quantity using Non-Invasive PZT Technology flight volume measurements under Zero G conditions (parabolic Plane flight data). Also experimental planning and lab work for future sub-orbital experiments to use the NASA PZT technology for fluid volume measurement. Along with conducting data analysis of flight data, I also did a variety of other tasks. I provided the lab with detailed technical drawings, experimented with 3d printers, made changes to the liquid nitrogen skid schematics, and learned how to weld. I also programmed microcontrollers to interact with various sensors and helped with other things going on around the lab.

Temporal Stress in the Operating Room: Brain Engagement Promotes "Coping" and Disengagement Prompts "Choking".

PubMed

Modi, Hemel N; Singh, Harsimrat; Orihuela-Espina, Felipe; Athanasiou, Thanos; Fiorentino, Francesca; Yang, Guang-Zhong; Darzi, Ara; Leff, Daniel R

2018-04-01

To investigate the impact of time pressure (TP) on prefrontal activation and technical performance in surgical residents during a laparoscopic suturing task. Neural mechanisms enabling surgeons to maintain performance and cope with operative stressors are unclear. The prefrontal cortex (PFC) is implicated due to its role in attention, concentration, and performance monitoring. A total of 33 residents [Postgraduate Year (PGY)1-2 = 15, PGY3-4 = 8, and PGY5 = 10] performed a laparoscopic suturing task under "self-paced" (SP) and "TP" conditions (TP = maximum 2 minutes per knot). Subjective workload was quantified using the Surgical Task Load Index. PFC activation was inferred using optical neuroimaging. Technical skill was assessed using progression scores (au), error scores (mm), leak volumes (mL), and knot tensile strengths (N). TP led to greater perceived workload amongst all residents (mean Surgical Task Load Index score ± SD: PGY1-2: SP = 160.3 ± 24.8 vs TP = 202.1 ± 45.4, P < 0.001; PGY3-4: SP = 123.0 ± 52.0 vs TP = 172.5 ± 43.1, P < 0.01; PGY5: SP = 105.8 ± 55.3 vs TP = 159.1 ± 63.1, P < 0.05). Amongst PGY1-2 and PGY3-4, deterioration in task progression, error scores and knot tensile strength (P < 0.05), and diminished PFC activation was observed under TP. In PGY5, TP resulted in inferior task progression and error scores (P < 0.05), but preservation of knot tensile strength. Furthermore, PGY5 exhibited less attenuation of PFC activation under TP, and greater activation than either PGY1-2 or PGY3-4 under both experimental conditions (P < 0.05). Senior residents cope better with temporal demands and exhibit greater technical performance stability under pressure, possibly due to sustained PFC activation and greater task engagement. Future work should seek to develop training strategies that recruit prefrontal resources, enhance task engagement, and improve performance under pressure.

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project. ACT/Control/Guidance System study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

1982-01-01

The integrated application of active controls (IAAC) technology to an advanced subsonic transport is reported. Supplementary technical data on the following topics are included: (1) 1990's avionics technology assessment; (2) function criticality assessment; (3) flight deck system for total control and functional features list; (4) criticality and reliability assessment of units; (5) crew procedural function task analysis; and (6) recommendations for simulation mechanization.

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

State-of-the-art technologies applicable to silicon solar cell and solar cell module fabrication were assessed. The assessment consisted of a technical feasibility evaluation and a cost projection for high volume production of solar cell modules. Design equations based on minimum power loss were used as a tool in the evaluation of metallization technologies. A solar cell process sensitivity study using models, computer calculations, and experimental data was used to identify process step variation and cell output variation correlations.

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites. FY 1992 year-end progress report: Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the ``60`s Pits`` area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

76 FR 69296 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-08

... Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite... Technical Specifications Task Force (TSTF) Traveler TSTF-500, Revision 2, ``DC Electrical Rewrite--Update to... Reactor Systems Engineer, Technical Specifications Branch, Mail Stop: O-7 C2A, Division of Inspection and...

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

An assessment of state-of-the-art technologies that are applicable to silicon solar cell and solar cell module fabrication is provided. The assessment consists of a technical feasibility evaluation and a cost projection for high-volume production of silicon solar cell modules. The cost projection was approached from two directions; a design-to-cost analysis assigned cost goals to each major process element in the fabrication scheme, and a cost analysis built up projected costs for alternate technologies for each process element. A technical evaluation was used in combination with the cost analysis to identify a baseline low cost process. A novel approach to metal pattern design based on minimum power loss was developed. These design equations were used as a tool in the evaluation of metallization technologies.

Satellite Power Systems (SPS) concept definition study (Exhibit D). Volume 5: Systems engineering/integration research and technology

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1981-01-01

Guidelines and ground rules followed in the development of requirements for the SPS are presented. Development planning objectives are specified in each of these areas, and evolutionary SPS program scenarios are described for the various concepts studied during the past one year contract. Program descriptions are presented as planning packages of technical tasks, and schedule phasing. Each package identifies the ground based technology effort that will facilitate SPS definitions, designs, development, and operations.

Toxic Chemicals in the Soil Environment. Volume 2. Interactions of Some Toxic Chemicals/Chemical Warfare Agents and Soils

DTIC Science & Technology

1985-06-01

ELEMENT. PROJECT, TASK U Oklahomar OK AREA A WORK UNIT NUMBERS and I-M-4657-10-D49 Technical Analysis & Info Office, DPG It. CONTROLLING OFFICE NAME AND...and fragmented. The data that were found resulted from research that showed evidence of a lack of understanding of the basic concepts of soil...organic matter after exhaus- tive extraction with polar and non -polar solvents." Rowever, these residues are not necessarily restricted to the organic

Life sciences payload definition and integration study, task C and D. Volume 4: Preliminary equipment item specification catalog

NASA Technical Reports Server (NTRS)

1973-01-01

A specification catalog to define the equipment to be used for conducting life sciences experiments in a space laboratory is presented. The specification sheets list the purpose of the equipment item, and any specific technical requirements which can be identified. The status of similar hardware for ground use is stated with comments regarding modifications required to achieve spaceflight qualified hardware. Pertinent sketches, commercial catalog sheets, or drawings of the applicable equipment are included.

[Task sharing with radiotherapy technicians in image-guided radiotherapy].

PubMed

Diaz, O; Lorchel, F; Revault, C; Mornex, F

2013-10-01

The development of accelerators with on-board imaging systems now allows better target volumes reset at the time of irradiation (image-guided radiotherapy [IGRT]). However, these technological advances in the control of repositioning led to a multiplication of tasks for each actor in radiotherapy and increase the time available for the treatment, whether for radiotherapy technicians or radiation oncologists. As there is currently no explicit regulatory framework governing the use of IGRT, some institutional experiments show that a transfer is possible between radiation oncologists and radiotherapy technicians for on-line verification of image positioning. Initial training for every technical and drafting procedures within institutions will improve audit quality by reducing interindividual variability. Copyright © 2013. Published by Elsevier SAS.

Advanced Transportation System Studies. Technical Area 3: Alternate Propulsion Subsystem Concepts. Volume 1; Executive Summary

NASA Technical Reports Server (NTRS)

Levack, Daniel J. H.

2000-01-01

The Alternate Propulsion Subsystem Concepts contract had seven tasks defined that are reported under this contract deliverable. The tasks were: FAA Restart Study, J-2S Restart Study, Propulsion Database Development. SSME Upper Stage Use. CERs for Liquid Propellant Rocket Engines. Advanced Low Cost Engines, and Tripropellant Comparison Study. The two restart studies, F-1A and J-2S, generated program plans for restarting production of each engine. Special emphasis was placed on determining changes to individual parts due to obsolete materials, changes in OSHA and environmental concerns, new processes available, and any configuration changes to the engines. The Propulsion Database Development task developed a database structure and format which is easy to use and modify while also being comprehensive in the level of detail available. The database structure included extensive engine information and allows for parametric data generation for conceptual engine concepts. The SSME Upper Stage Use task examined the changes needed or desirable to use the SSME as an upper stage engine both in a second stage and in a translunar injection stage. The CERs for Liquid Engines task developed qualitative parametric cost estimating relationships at the engine and major subassembly level for estimating development and production costs of chemical propulsion liquid rocket engines. The Advanced Low Cost Engines task examined propulsion systems for SSTO applications including engine concept definition, mission analysis. trade studies. operating point selection, turbomachinery alternatives, life cycle cost, weight definition. and point design conceptual drawings and component design. The task concentrated on bipropellant engines, but also examined tripropellant engines. The Tripropellant Comparison Study task provided an unambiguous comparison among various tripropellant implementation approaches and cycle choices, and then compared them to similarly designed bipropellant engines in the SSTO mission This volume overviews each of the tasks giving its objectives, main results. and conclusions. More detailed Final Task Reports are available on each individual task.

Report of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries, Volume III: Technical Papers.

ERIC Educational Resources Information Center

United Nations, New York, NY. Dept. of Economic and Social Affairs.

This collection of papers is the third of three volumes presenting the proceedings of the United Nations Interregional Seminar on the Employment, Development and Role of Scientists and Technical Personnel in the Public Service of Developing Countries (Volume I, Report of the Seminar; Volume II, Country Papers; and Volume III, Technical Papers).…

Tactical expertise assessment in youth football using representative tasks.

PubMed

Serra-Olivares, Jaime; Clemente, Filipe Manuel; González-Víllora, Sixto

2016-01-01

Specific football drills improve the development of technical/tactical and physical variables in players. Based on this principle, in recent years it has been possible to observe in daily training a growing volume of small-sided and conditioned games. These games are smaller and modified forms of formal games that augment players' perception of specific tactics. Despite this approach, the assessment of players' knowledge and tactical execution has not been well documented, due mainly to the difficulty in measuring tactical behavior. For that reason, this study aims to provide a narrative review about the tactical assessment of football training by using representative tasks to measure the tactical expertise of youth football players during small-sided and conditioned games. This study gives an overview of the ecological approach to training and the principles used for representative task design, providing relevant contribution and direction for future research into the assessment of tactical expertise in youth football.

Geostationary Operational Environmental Satellite (GOES-N report). Volume 1: Technical

NASA Technical Reports Server (NTRS)

1991-01-01

The GOES-N study consisted of five distinct tasks including: determining replication costs of GOES I-M and GOES-7 in the GOES-N time frame; defining and evaluating modifications to GOES I-M to improve efficiency or reduce costs; and defining evolutionary changes to the GOES I-M design to satisfy National Weather Service (NWS) 1983 and NOAA 1989 requirements. The categorization and disposition of NOAA requirements is reported in volume 1 section 4. Results of the GOES I-M efficiency/cost improvement modifications study are described in Section 7.1. The system concept options 1, 2, and 3 that generally represent the results of the Task 2, 3A, and 3B studies are summarized in Section 7.2. Another result of the GOES-N study, the determination of which NWS 1983 and NOAA 1989 requirements can be met with the three options, is contained in volume 1 section 7. Conclusions and recommendations are covered in volume 1 section 8. Imager, sounder, control system, space environment monitor, search and rescue, weather facsimile, data collection system, and products/process/communications recommendations were extracted from sections 9, 10, and 11. Section 8 also contains conclusions pertaining to programmatic operational satellite issues (prerequisite development strategies, the direct procurement of instruments by the government, protoflight mission, etc.). Sections 9, 10, and 11 address instrument, control system, image/navigation/registration, and other system design considerations and surveys. These sections are supported by the appendices in volume 2.

Geostationary Operational Environmental Satellite (GOES-N report). Volume 1: Technical

NASA Astrophysics Data System (ADS)

1991-12-01

The GOES-N study consisted of five distinct tasks including: determining replication costs of GOES I-M and GOES-7 in the GOES-N time frame; defining and evaluating modifications to GOES I-M to improve efficiency or reduce costs; and defining evolutionary changes to the GOES I-M design to satisfy National Weather Service (NWS) 1983 and NOAA 1989 requirements. The categorization and disposition of NOAA requirements is reported in volume 1 section 4. Results of the GOES I-M efficiency/cost improvement modifications study are described in Section 7.1. The system concept options 1, 2, and 3 that generally represent the results of the Task 2, 3A, and 3B studies are summarized in Section 7.2. Another result of the GOES-N study, the determination of which NWS 1983 and NOAA 1989 requirements can be met with the three options, is contained in volume 1 section 7. Conclusions and recommendations are covered in volume 1 section 8. Imager, sounder, control system, space environment monitor, search and rescue, weather facsimile, data collection system, and products/process/communications recommendations were extracted from sections 9, 10, and 11. Section 8 also contains conclusions pertaining to programmatic operational satellite issues (prerequisite development strategies, the direct procurement of instruments by the government, protoflight mission, etc.). Sections 9, 10, and 11 address instrument, control system, image/navigation/registration, and other system design considerations and surveys. These sections are supported by the appendices in volume 2.

48 CFR 2052.216-72 - Task order procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

...; (5) Technical skills required; and (6) Estimated level of effort. (b) Task order technical proposal. By the date specified in the TORFP, the contractor shall deliver to the contracting officer a written or verbal (as specified in the TORFP technical proposal submittal instructions) technical proposal...

Influences of a yoga intervention on the postural skills of the Italian short track speed skating team

PubMed Central

Brunelle, Jean-François; Blais-Coutu, Sébastien; Gouadec, Kenan; Bédard, Éric; Fait, Philippe

2015-01-01

Introduction In preparation for a short track speed skating season, eight men and seven women were given yoga sessions during an 8-week high volume training cycle. The sessions were planned according to the postural aspects specific to short track speed skating technical requirements. Three specific goals were selected for the intervention: 1) to observe whether the practice of yoga as postural training could improve the efficiency and the athlete’s repertoire along the muscular synergies solicited in the short track speed skating specific technique; 2) to enhance and diversify the motor time-on-task of athletes without changing the prescription of other training stimulus; and 3) to lower the risk of injury during periods with high volumes of training. Methods A total of 36 sessions of yoga were given. Three postural tests were administered before and after the intervention with 14 angles analyzed. Non-parametric Wilcoxon test was used to compare angles’ variations. Results The 36 yoga sessions totalized 986 minutes of motor time-on-task, registering a proportion of 30% of the global motor time-on-task of the training cycle. Improvements were found in eleven of the 14 angles measured when comparing pre- and post-postural tests (P-value from 0.01 to 0.005). During the 8 weeks, excepting traumatic injuries due to short track speed skating accidents, no skaters suffered injuries linked to the high volume of training. Following the intervention, coaches noticed, following their on-ice feedbacks, an adjustment in the efficiency of the skating technique, in particular regarding hip dissociation. Conclusion These results suggest that yoga could be inserted into out-of-season training cycles, even in a high volume training cycle. Planned with the decision training tools, it allows athletes to diversify their motor time-on-task by integrating a new functional range of generic movements with the solicitation of neuromuscular synergies related to the specificity of their sport. PMID:25709511

Turnaround operations analysis for OTV. Volume 2: Detailed technical report

NASA Technical Reports Server (NTRS)

1988-01-01

The objectives and accomplishments were to adapt and apply the newly created database of Shuttle/Centaur ground operations. Previously defined turnaround operations analyses were to be updated for ground-based OTVs (GBOTVs) and space-based OTVs (SBOTVs), design requirements identified for both OTV and Space Station accommodations hardware, turnaround operations costs estimated, and a technology development plan generated to develop the required capabilities. Technical and programmatic data were provided for NASA pertinent to OTV round and space operations requirements, turnaround operations, task descriptions, timelines and manpower requirements, OTV modular design and booster and Space Station interface requirements. SBOTV accommodations development schedule, cost and turnaround operations requirements, and a technology development plan for ground and space operations and space-based accommodations facilities and support equipment. Significant conclusion are discussed.

Correlation Characterization of Particles in Volume Based on Peak-to-Basement Ratio

PubMed Central

Vovk, Tatiana A.; Petrov, Nikolay V.

2017-01-01

We propose a new express method of the correlation characterization of the particles suspended in the volume of optically transparent medium. It utilizes inline digital holography technique for obtaining two images of the adjacent layers from the investigated volume with subsequent matching of the cross-correlation function peak-to-basement ratio calculated for these images. After preliminary calibration via numerical simulation, the proposed method allows one to quickly distinguish parameters of the particle distribution and evaluate their concentration. The experimental verification was carried out for the two types of physical suspensions. Our method can be applied in environmental and biological research, which includes analyzing tools in flow cytometry devices, express characterization of particles and biological cells in air and water media, and various technical tasks, e.g. the study of scattering objects or rapid determination of cutting tool conditions in mechanisms. PMID:28252020

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

NASA Technical Reports Server (NTRS)

Hall, Edward; Magner, James

2011-01-01

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

NASA Technical Reports Server (NTRS)

Hall, Edward; Isaacs, James; Henriksen, Steve; Zelkin, Natalie

2011-01-01

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

Data management in pattern recognition and image processing systems

NASA Technical Reports Server (NTRS)

Zobrist, A. L.; Bryant, N. A.

1976-01-01

Data management considerations are important to any system which handles large volumes of data or where the manipulation of data is technically sophisticated. A particular problem is the introduction of image-formatted files into the mainstream of data processing application. This report describes a comprehensive system for the manipulation of image, tabular, and graphical data sets which involve conversions between the various data types. A key characteristic is the use of image processing technology to accomplish data management tasks. Because of this, the term 'image-based information system' has been adopted.

Teleoperator technology and system development, volume 1

NASA Technical Reports Server (NTRS)

1972-01-01

A two phase approach was undertaken to: (1) evaluate the performance of a general-purpose anthropomorphic manipulator with various controllers and display arrangements, (2) identify basic technical limitations of existing teleoperator designs, and associated controls and displays, and (3) identify, through experimentation, the effects that controls and displays have on the performance of an anthropomorphic manipulator. In Phase 1 the NASA-furnished manipulators, controls and displays were integrated with the remote maneuvering unit; in Phase 2 experiments were defined and performed to assess the utility of teleoperators for 6 typical space inspection, maintenance and repair tasks.

Shuttle Ground Operations Efficiencies/Technologies Study (SGOE/T). Volume 5: Technical Information Sheets (TIS)

NASA Technical Reports Server (NTRS)

Scholz, A. L.; Hart, M. T.; Lowry, D. J.

1987-01-01

The Technology Information Sheet was assembled in database format during Phase I. This document was designed to provide a repository for information pertaining to 144 Operations and Maintenance Instructions (OMI) controlled operations in the Orbiter Processing Facility (OPF), Vehicle Assembly Building (VAB), and PAD. It provides a way to accumulate information about required crew sizes, operations task time duration (serial and/or parallel), special Ground Support Equipment (GSE). required, and identification of a potential application of existing technology or the need for the development of a new technolgoy item.

Space station/base food system study. Volume 1: Systems design handbook

NASA Technical Reports Server (NTRS)

1970-01-01

A description is given of the approach used in a study to identify and define engineering data for a spectrum of possible items and equipment comprising potential food systems. In addition, the material presented includes: (1) the study results containing the candidate concepts considered and technical data, performance characteristics, and sketches for each of the concepts by functional area; (2) human factors considerations for crew tasks; (3) shuttle supply interface requirements; (4) special food system study areas; and (5) recommendations and conclusions based on the study results.

Software Description for the O’Hare Runway Configuration Management System. Volume I. Technical Description,

DTIC Science & Technology

1982-10-01

spent in preparing this document. 00. EXECUTIVE SUMMARY The O’Hare Runway Configuration Management System (CMS) is an interactive multi-user computer ...MITRE Washington’s Computer Center. Currently, CMS is housed in an IBM 4341 computer with VM/SP operating system. CMS employs the IBM’s Display...iV 0O, o 0 .r4L /~ wA 0U 00 00 0 w vi O’Hare, it will operate on a dedicated mini- computer which permits multi-tasking (that is, multiple users

A Report by the Governor's Task Force on Vocational and Technical Education.

ERIC Educational Resources Information Center

Governor's Task Force on Vocational and Technical Education, Columbus, OH.

On July 19, 1968, a Task Force on Vocational and Technical Education was created by the governor of Ohio to develop proposals for organization, financing, and legislation. Some major problems to which the Task Force gave attention were: (1) the serious gap between the need for and the availability of vocational and technical education, (2) the…

International Linear Collider Technical Design Report (Volumes 1 through 4)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrison M.

2013-03-27

The design report consists of four volumes: Volume 1, Executive Summary; Volume 2, Physics; Volume 3, Accelerator (Part I, R and D in the Technical Design Phase, and Part II, Baseline Design); and Volume 4, Detectors.

Task Inventory Construction. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 14.

ERIC Educational Resources Information Center

Kishi, Akemi

To aid in the construction of effective task analysis inventories, this technical report discusses: (1) an optimum questionnaire length that adequately covers Marine tasks without unduly fatiguing respondents; (2) procedures for the phrasing of task statements to avoid ambiguities and be understandable to as broad a range of Marines as is…

Space station systems technology study (add-on task). Volume 2: Trade study and technology selection

NASA Technical Reports Server (NTRS)

1985-01-01

The current Space Station Systems Technology Study add on task was an outgrowth of the Advanced Platform Systems Technology Study (APSTS) that was completed in April 1983 and the subsequent Space Station System Technology Study completed in April 1984. The first APSTS proceeded from the identification of 106 technology topics to the selection of five for detailed trade studies. During the advanced platform study, the technical issues and options were evaluated through detailed trade processes, individual consideration was given to costs and benefits for the technologies identified for advancement, and advancement plans were developed. An approach similar to that was used in the subsequent study, with emphasis on system definition in four specific technology areas to facilitate a more in depth analysis of technology issues.

Effects of the Sports Level, Format of the Game and Task Condition on Heart Rate Responses, Technical and Tactical Performance of Youth Basketball Players

PubMed Central

Clemente, Filipe Manuel; González-Víllora, Sixto; Delextrat, Anne; Martins, Fernando Manuel Lourenço; Vicedo, Juan Carlos Pastor

2017-01-01

Abstract The aim of this study was to analyze the effect of different small-sided and conditioning games (SSCG) with different tactical contents on heart rate responses, technical performance and collective organization of youth basketball players of different performance levels. Twenty male basketball players from U14 (13.7 ± 0.8 years old; 4.2 ± 1.4 years of practice) and U16 (15.3 ± 1.1 years old; 6.4 ± 2.1 years of practice) participated in this research study. The two-way MANOVA revealed that the sports level (p = 0.009; ηp2 = 0.151), format (p = 0.001; ηp2 = 0.246) and task condition (p = 0.023; ηp2 = 0.104; small effect size) had significant main effects on heart rate responses. It was also found that the format (p = 0.001; ηp2 = 0.182) had significant main effects on technical performance. A smaller format significantly increased the heart rate, volume of play, efficiency index and collective density during attacking plays. The SSCG with attacking content statistically increased the heart rate, efficiency index and performance score. Therefore, this study revealed that different SSCGs with tactical content influenced the physiological responses of youth players. PMID:28828085

A new global and comprehensive model for ICU ventilator performances evaluation.

PubMed

Marjanovic, Nicolas S; De Simone, Agathe; Jegou, Guillaume; L'Her, Erwan

2017-12-01

This study aimed to provide a new global and comprehensive evaluation of recent ICU ventilators taking into account both technical performances and ergonomics. Six recent ICU ventilators were evaluated. Technical performances were assessed under two FIO 2 levels (100%, 50%), three respiratory mechanics combinations (Normal: compliance [C] = 70 mL cmH 2 O -1 /resistance [R] = 5 cmH 2 O L -1  s -1 ; Restrictive: C = 30/R = 10; Obstructive: C = 120/R = 20), four exponential levels of leaks (from 0 to 12.5 L min -1 ) and three levels of inspiratory effort (P0.1 = 2, 4 and 8 cmH 2 O), using an automated test lung. Ergonomics were evaluated by 20 ICU physicians using a global and comprehensive model involving physiological response to stress measurements (heart rate, respiratory rate, tidal volume variability and eye tracking), psycho-cognitive scales (SUS and NASA-TLX) and objective tasks completion. Few differences in terms of technical performance were observed between devices. Non-invasive ventilation modes had a huge influence on asynchrony occurrence. Using our global model, either objective tasks completion, psycho-cognitive scales and/or physiological measurements were able to depict significant differences in terms of devices' usability. The level of failure that was observed with some devices depicted the lack of adaptation of device's development to end users' requests. Despite similar technical performance, some ICU ventilators exhibit low ergonomics performance and a high risk of misusage.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

Strategy-Based Technical Instruction: Development and Evaluation

DTIC Science & Technology

1988-08-01

scripts dependant on target tasks and the outcomes desired, and to the use of node-link knowledge maps as communications props. In addition, we have...information "on the job" - communicate with others in the task environment; - monitor, diagnose, and correct problems associated with critical tasks... communicated . Technical Training Goals The individual in a technical training scenario is expected to achieve a wide variety of goals. These goals can

Task Descriptions in Diagnostic Radiology. Research Report No. 7. Volume 4, Index of Tasks by Code Number and Extended Name.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

The fourth of four volumes in Research Report No. 7 of the Health Services Mobility Study (HSMS), this book contains the extended task names of all the tasks whose descriptions can be found in the three prior volumes. It serves as an index to all the tasks by listing the volume in which each task description appears. Chapter 1 of this volume…

Training Providers of Services to Persons with Developmental Disabilities. Level I. Technical Committee Report and Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the committees assignment. This Technical Committee Report presents a task list that…

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 3. (Appendix B) support ships. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weitz, R.; Thomas, C.; Klemm, J.

1982-03-03

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

Analysis of radiation exposure for naval units of Operation Crossroads. Volume 2. (Appendix A) target ships. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weitz, R.; Thomas, C.; Klemm, J.

1982-03-03

External radiation doses are reconstructed for crews of support and target ships of Joint Task Force One at Operation CROSSROADS, 1946. Volume I describes the reconstruction methodology, which consists of modeling the radiation environment, to include the radioactivity of lagoon water, target ships, and support ship contamination; retracing ship paths through this environment; and calculating the doses to shipboard personnel. The USS RECLAIMER, a support ship, is selected as a representative ship to demonstrate this methodology. Doses for all other ships are summarized. Volume II (Appendix A) details the results for target ship personnel. Volume III (Appendix B) details themore » results for support ship personnel. Calculated doses for more than 36,000 personnel aboard support ships while at Bikini range from zero to 1.7 rem. Of those, approximately 34,000 are less than 0.5 rem. From the models provided, doses due to target ship reboarding and doses accrued after departure from Bikini can be calculated, based on the individual circumstances of exposure.« less

Communications satellite systems operations with the space station. Volume 3: Supplementary technical report

NASA Technical Reports Server (NTRS)

Price, K. M.; Russell, P.; Weyandt, C.

1988-01-01

The NASA space station has the potential to provide significant economic benefits to commercial communications satellite operators. The initial reports qunatified the benefits of space-based activities and assessed the impacts on the satellite design and the space station. Results are given for the following additional tasks: quantify the value of satellite retrievability operations and define its operational aspects; evaluate the use of expendable launch vehicles for transportation of satellites from the Earth to the space station; and quantify the economic value of modular satellites that are assembled and serviced in space.

Research safety vehicle. Phase II. Volume II. comprehensive technical results. Final report July 1975--December 1976

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiNapoli, N.; Fitzpatrick, M.; Strother, C.

1977-11-01

Phase I identified trends leading to the desired national social goals of the mid-1980's in vehicle crashworthiness, crash avoidance, damageability, pedestrian safety, fuel economy, emissions and cost, and characterized an RSV to satisfy them. In Phase II an RSV prototype was designed, developed and tested to demonstrate the feasibility of meeting these goals simultaneously. Although further refinement is necessary to assure operational validity, in all categories the results meet or exceed the most advanced performance specified by The Presidential Task Force on Motor Vehicle Goals beyond 1980.

A web service system supporting three-dimensional post-processing of medical images based on WADO protocol.

PubMed

He, Longjun; Xu, Lang; Ming, Xing; Liu, Qian

2015-02-01

Three-dimensional post-processing operations on the volume data generated by a series of CT or MR images had important significance on image reading and diagnosis. As a part of the DIOCM standard, WADO service defined how to access DICOM objects on the Web, but it didn't involve three-dimensional post-processing operations on the series images. This paper analyzed the technical features of three-dimensional post-processing operations on the volume data, and then designed and implemented a web service system for three-dimensional post-processing operations of medical images based on the WADO protocol. In order to improve the scalability of the proposed system, the business tasks and calculation operations were separated into two modules. As results, it was proved that the proposed system could support three-dimensional post-processing service of medical images for multiple clients at the same moment, which met the demand of accessing three-dimensional post-processing operations on the volume data on the web.

Predictive value of background experiences and visual spatial ability testing on laparoscopic baseline performance among residents entering postgraduate surgical training.

PubMed

Louridas, Marisa; Quinn, Lauren E; Grantcharov, Teodor P

2016-03-01

Emerging evidence suggests that despite dedicated practice, not all surgical trainees have the ability to reach technical competency in minimally invasive techniques. While selecting residents that have the ability to reach technical competence is important, evidence to guide the incorporation of technical ability into selection processes is limited. Therefore, the purpose of the present study was to evaluate whether background experiences and 2D-3D visual spatial test results are predictive of baseline laparoscopic skill for the novice surgical trainee. First-year residents were studied. Demographic data and background surgical and non-surgical experiences were obtained using a questionnaire. Visual spatial ability was evaluated using the PicSOr, cube comparison (CC) and card rotation (CR) tests. Technical skill was assessed using the camera navigation (LCN) task and laparoscopic circle cut (LCC) task. Resident performance on these technical tasks was compared and correlated with the questionnaire and visual spatial findings. Previous experience in observing laparoscopic procedures was associated with significantly better LCN performance, and experience in navigating the laparoscopic camera was associated with significantly better LCC task results. Residents who scored higher on the CC test demonstrated a more accurate LCN path length score (r s(PL) = -0.36, p = 0.03) and angle path (r s(AP) = -0.426, p = 0.01) score when completing the LCN task. No other significant correlations were found between the visual spatial tests (PicSOr, CC or CR) and LCC performance. While identifying selection tests for incoming surgical trainees that predict technical skill performance is appealing, the surrogate markers evaluated correlate with specific metrics of surgical performance related to a single task but do not appear to reliably predict technical performance of different laparoscopic tasks. Predicting the acquisition of technical skills will require the development of a series of evidence-based tests that measure a number of innate abilities as well as their inherent interactions.

High Productivity Aluminum Manufacturing

DTIC Science & Technology

2013-07-01

D. J. Spinella Alcoa Inc. Alcoa Technical Center 100 Technical Drive Alcoa Center, PA 15069 July 2013 CNST Base Task Order...Myers, Kirit Shah, D. J. Spinella 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Alcoa , Inc...8. PERFORMING ORGANIZATION REPORT NUMBER 100 Technical Drive Alcoa Center, PA 15069 9

Applied Space Systems Engineering. Chapter 17; Manage Technical Data

NASA Technical Reports Server (NTRS)

Kent, Peter

2008-01-01

Effective space systems engineering (SSE) is conducted in a fully electronic manner. Competitive hardware, software, and system designs are created in a totally digital environment that enables rapid product design and manufacturing cycles, as well as a multitude of techniques such as modeling, simulation, and lean manufacturing that significantly reduce the lifecycle cost of systems. Because the SSE lifecycle depends on the digital environment, managing the enormous volumes of technical data needed to describe, build, deploy, and operate systems is a critical factor in the success of a project. This chapter presents the key aspects of Technical Data Management (TDM) within the SSE process. It is written from the perspective of the System Engineer tasked with establishing the TDM process and infrastructure for a major project. Additional perspectives are reflected from the point of view of the engineers on the project who work within the digital engineering environment established by the TDM toolset and infrastructure, and from the point of view of the contactors who interface via the TDM infrastructure. Table 17.1 lists the TDM process as it relates to SSE.

Flat-plate solar array project. Volume 8: Project analysis and integration

NASA Technical Reports Server (NTRS)

Mcguire, P.; Henry, P.

1986-01-01

Project Analysis and Integration (PA&I) performed planning and integration activities to support management of the various Flat-Plate Solar Array (FSA) Project R&D activities. Technical and economic goals were established by PA&I for each R&D task within the project to coordinate the thrust toward the National Photovoltaic Program goals. A sophisticated computer modeling capability was developed to assess technical progress toward meeting the economic goals. These models included a manufacturing facility simulation, a photovoltaic power station simulation and a decision aid model incorporating uncertainty. This family of analysis tools was used to track the progress of the technology and to explore the effects of alternative technical paths. Numerous studies conducted by PA&I signaled the achievement of milestones or were the foundation of major FSA project and national program decisions. The most important PA&I activities during the project history are summarized. The PA&I planning function is discussed and how it relates to project direction and important analytical models developed by PA&I for its analytical and assessment activities are reviewed.

NASA Aerospace Flight Battery Program: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries; Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries; Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop). Volume 2, Part 1

NASA Technical Reports Server (NTRS)

Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This report contains the Appendices to the findings from the first year of the program's operations.

Space platform expendables resupply concept definition study. Volume 3: Work breakdown structure and work breakdown structure dictionary

NASA Technical Reports Server (NTRS)

1984-01-01

The work breakdown structure (WBS) for the Space Platform Expendables Resupply Concept Definition Study is described. The WBS consists of a list of WBS elements, a dictionary of element definitions, and an element logic diagram. The list and logic diagram identify the interrelationships of the elements. The dictionary defines the types of work that may be represented by or be classified under each specific element. The Space Platform Expendable Resupply WBS was selected mainly to support the program planning, scheduling, and costing performed in the programmatics task (task 3). The WBS is neither a statement-of-work nor a work authorization document. Rather, it is a framework around which to define requirements, plan effort, assign responsibilities, allocate and control resources, and report progress, expenditures, technical performance, and schedule performance. The WBS element definitions are independent of make-or-buy decisions, organizational structure, and activity locations unless exceptions are specifically stated.

Business of reliability

NASA Astrophysics Data System (ADS)

Engel, Pierre

1999-12-01

The presentation is organized around three themes: (1) The decrease of reception equipment costs allows non-Remote Sensing organization to access a technology until recently reserved to scientific elite. What this means is the rise of 'operational' executive agencies considering space-based technology and operations as a viable input to their daily tasks. This is possible thanks to totally dedicated ground receiving entities focusing on one application for themselves, rather than serving a vast community of users. (2) The multiplication of earth observation platforms will form the base for reliable technical and financial solutions. One obstacle to the growth of the earth observation industry is the variety of policies (commercial versus non-commercial) ruling the distribution of the data and value-added products. In particular, the high volume of data sales required for the return on investment does conflict with traditional low-volume data use for most applications. Constant access to data sources supposes monitoring needs as well as technical proficiency. (3) Large volume use of data coupled with low- cost equipment costs is only possible when the technology has proven reliable, in terms of application results, financial risks and data supply. Each of these factors is reviewed. The expectation is that international cooperation between agencies and private ventures will pave the way for future business models. As an illustration, the presentation proposes to use some recent non-traditional monitoring applications, that may lead to significant use of earth observation data, value added products and services: flood monitoring, ship detection, marine oil pollution deterrent systems and rice acreage monitoring.

O*NET Final Technical Report. Volume I [and] Volume II [and] Volume III.

ERIC Educational Resources Information Center

Peterson, Norman G.; Mumford, Michael D.; Borman, Walter C.; Jeanneret, P. Richard; Fleishman, Edwin A.; Levin, Kerry Y.

This document contains the three volumes of the technical report for development of the prototype of the Occupational Information Network (O*NET), which is intended to replace the "Dictionary of Occupational Titles.""General Introduction" (Norman G. Peterson) presents an overview of O*NET's purpose, content, and structure.…

Northeast Artificial Intelligence Consortium annual report. Volume 2. 1988. Discussing, using, and recognizing plans (NLP). Interim report, January-December 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shapiro, S.C.; Woolf, B.

The Northeast Artificial Intelligence Consortium (NAIC) was created by the Air Force Systems Command, Rome Air Development Center, and the Office of Scientific Research. Its purpose is to conduct pertinent research in artificial intelligence and to perform activities ancillary to this research. This report describes progress that has been made in the fourth year of the existence of the NAIC on the technical research tasks undertaken at the member universities. The topics covered in general are: versatile expert system for equipment maintenance, distributed AI for communications system control, automatic photointerpretation, time-oriented problem solving, speech understanding systems, knowledge base maintenance, hardwaremore » architectures for very large systems, knowledge-based reasoning and planning, and a knowledge acquisition, assistance, and explanation system. The specific topic for this volume is the recognition of plans expressed in natural language, followed by their discussion and use.« less

Tasks completed by nursing members of a teaching hospital Medical Emergency Team.

PubMed

Topple, Michelle; Ryan, Brooke; Baldwin, Ian; McKay, Richard; Blythe, Damien; Rogan, John; Radford, Sam; Jones, Daryl

2016-02-01

To assess tasks completed by intensive care medical emergency team nurses. Prospective observational study. Australian teaching hospital. Nursing-related technical and non-technical tasks and level of self-reported confidence and competence. Amongst 400 calls, triggers and nursing tasks were captured in 93.5% and 77.3% of cases, respectively. The median patient age was 73 years. The four most common triggers were hypotension (22.0%), tachycardia (21.1%), low SpO2 (17.4%), and altered conscious state (10.1%). Non-technical skills included investigation review (33.7%), history acquisition (18.4%), contribution to the management plan (40.5%) and explanation to bedside nurses (78.3%), doctors (13.6%), allied health (3.9%) or patient/relative (39.5%). Technical tasks included examining the circulation (32%), conscious state (29.4%), and chest (26.5%). Additional tasks included adjusting oxygen (23.9%), humidification (8.4%), non-invasive ventilation (6.5%), performing an ECG (22%), and administrating fluid as a bolus (17.5%) or maintenance (16, 5.2%), or medication as a statim dose (16.8%) or infusion (5.2%). Self-reported competence and confidence appeared to be high overall amongst our MET nurses. Our findings provide important information on the tasks completed by Medical Emergency Team nurses and will guide future training. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study of space shuttle EVA/IVA support requirements. Volume 1: Technical summary report

NASA Technical Reports Server (NTRS)

Copeland, R. J.; Wood, P. W., Jr.; Cox, R. L.

1973-01-01

Results are summarized which were obtained for equipment requirements for the space shuttle EVA/IVA pressure suit, life support system, mobility aids, vehicle support provisions, and energy 4 support. An initial study of tasks, guidelines, and constraints and a special task on the impact of a 10 psia orbiter cabin atmosphere are included. Supporting studies not related exclusively to any one group of equipment requirements are also summarized. Representative EVA/IVA task scenarios were defined based on an evaluation of missions and payloads. Analysis of the scenarios resulted in a total of 788 EVA/IVA's in the 1979-1990 time frame, for an average of 1.3 per shuttle flight. Duration was estimated to be under 4 hours on 98% of the EVA/IVA's, and distance from the airlock was determined to be 70 feet or less 96% of the time. Payload water vapor sensitivity was estimated to be significant on 9%-17% of the flights. Further analysis of the scenarios was carried out to determine specific equipment characteristics, such as suit cycle and mobility requirements.

Army Science Board FY2000 Summer Study. Technical and Tactical Opportunities for Revolutionary Advances in Rapidly Deployable Joint Ground Forces in the 2015-2025 Era. Volume III: Information Dominance Panel Report

DTIC Science & Technology

2001-04-01

Information Dominance , Sustainment and Support, and Training. The study concludes: 1) the FCS concept is sound, but senior level attention is required to ensure technologies are ready for 2006 FCS EMD; and 2) Key technologies will significantly improve force projection and combat power. The Information Dominance Panel was tasked to: 1) Assess required sensors at National and Theater level; 2) Assess the technological opportunity to provide necessary bandwidth for data, voice and video requirements; 3) Ascertain the requirements to deny the threat

Development and tuning of an original search engine for patent libraries in medicinal chemistry.

PubMed

Pasche, Emilie; Gobeill, Julien; Kreim, Olivier; Oezdemir-Zaech, Fatma; Vachon, Therese; Lovis, Christian; Ruch, Patrick

2014-01-01

The large increase in the size of patent collections has led to the need of efficient search strategies. But the development of advanced text-mining applications dedicated to patents of the biomedical field remains rare, in particular to address the needs of the pharmaceutical & biotech industry, which intensively uses patent libraries for competitive intelligence and drug development. We describe here the development of an advanced retrieval engine to search information in patent collections in the field of medicinal chemistry. We investigate and combine different strategies and evaluate their respective impact on the performance of the search engine applied to various search tasks, which covers the putatively most frequent search behaviours of intellectual property officers in medical chemistry: 1) a prior art search task; 2) a technical survey task; and 3) a variant of the technical survey task, sometimes called known-item search task, where a single patent is targeted. The optimal tuning of our engine resulted in a top-precision of 6.76% for the prior art search task, 23.28% for the technical survey task and 46.02% for the variant of the technical survey task. We observed that co-citation boosting was an appropriate strategy to improve prior art search tasks, while IPC classification of queries was improving retrieval effectiveness for technical survey tasks. Surprisingly, the use of the full body of the patent was always detrimental for search effectiveness. It was also observed that normalizing biomedical entities using curated dictionaries had simply no impact on the search tasks we evaluate. The search engine was finally implemented as a web-application within Novartis Pharma. The application is briefly described in the report. We have presented the development of a search engine dedicated to patent search, based on state of the art methods applied to patent corpora. We have shown that a proper tuning of the system to adapt to the various search tasks clearly increases the effectiveness of the system. We conclude that different search tasks demand different information retrieval engines' settings in order to yield optimal end-user retrieval.

Development and tuning of an original search engine for patent libraries in medicinal chemistry

PubMed Central

2014-01-01

Background The large increase in the size of patent collections has led to the need of efficient search strategies. But the development of advanced text-mining applications dedicated to patents of the biomedical field remains rare, in particular to address the needs of the pharmaceutical & biotech industry, which intensively uses patent libraries for competitive intelligence and drug development. Methods We describe here the development of an advanced retrieval engine to search information in patent collections in the field of medicinal chemistry. We investigate and combine different strategies and evaluate their respective impact on the performance of the search engine applied to various search tasks, which covers the putatively most frequent search behaviours of intellectual property officers in medical chemistry: 1) a prior art search task; 2) a technical survey task; and 3) a variant of the technical survey task, sometimes called known-item search task, where a single patent is targeted. Results The optimal tuning of our engine resulted in a top-precision of 6.76% for the prior art search task, 23.28% for the technical survey task and 46.02% for the variant of the technical survey task. We observed that co-citation boosting was an appropriate strategy to improve prior art search tasks, while IPC classification of queries was improving retrieval effectiveness for technical survey tasks. Surprisingly, the use of the full body of the patent was always detrimental for search effectiveness. It was also observed that normalizing biomedical entities using curated dictionaries had simply no impact on the search tasks we evaluate. The search engine was finally implemented as a web-application within Novartis Pharma. The application is briefly described in the report. Conclusions We have presented the development of a search engine dedicated to patent search, based on state of the art methods applied to patent corpora. We have shown that a proper tuning of the system to adapt to the various search tasks clearly increases the effectiveness of the system. We conclude that different search tasks demand different information retrieval engines' settings in order to yield optimal end-user retrieval. PMID:24564220

NetView technical research

NASA Technical Reports Server (NTRS)

1993-01-01

This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

Task Force on the Role of General Education in Associate Science Degree Programs. Final Report and Recommendations.

ERIC Educational Resources Information Center

Weyers, Lori; Langerman, Philip

In 1989-90, the General Education Task Force of the Wisconsin Technical College System (WTCS) was convened to determine the role of the general education curriculum in the attainment of skills that enhance the likelihood of success among technical college graduates in their careers, homes and communities. The Task Force consisted of at least one…

76 FR 4549 - Testing of Certain High Production Volume Chemicals; Second Group of Chemicals; Technical Correction

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

... Testing of Certain High Production Volume Chemicals; Second Group of Chemicals; Technical Correction... production volume (HPV) chemical substances to obtain screening level data for health and environmental effects and chemical fate. This document is being issued to correct a typographical error concerning the...

Archaeological and Geomorphological Data Recovery at Saylorville Lake, Polk County, Iowa. Volume 1. Technical Report.

DTIC Science & Technology

1984-12-01

IOWA I .1 0 VOLUME! TECHNICAL REPORT Prepared Under the Supervision of With the Assistance of Patricia M. Emerson Harlan R. Finney Principal...POLK COUNTY, IOWA VOLUME I o TECHNICAL REPORT DECEMBER 1984 V Prepared Under the Supervision of Patricia M. Emerson, Principal Investigator With the...U.S. Army Corps of Engineers flood-control reservoir located on the Des Moines River In Polk County, Iowa . The work reported herein was done as a

48 CFR 2452.242-71 - Contract management system.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., concise summary of technical progress made and the costs incurred for each task during the reporting... technical progress made for each task during the reporting period; and (B) Identifies problems, or potential... and progress reporting as described herein. (b) The contract management system shall consist of two...

Architectural Drafting: Commercial Applications. Teacher Guide.

ERIC Educational Resources Information Center

Whitney, Terry A.

This curriculum guide contains the technical information and tasks necessary for a student (who has already completed basic drafting) to be employed as an architectural drafter trainee. The curriculum is written in terms of student performance using measurable objectives, technical information, tasks developed to accomplish those objectives, and…

Western Shallow Oil Zone, Elk Hills Field, Kern County, California: General reservoir study, Appendix 4, Fourth Wilhelm sand

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carey, K.B.

1987-09-01

The general Reservoir Study of the Western Shallow Oil Zone was prepared by Evans, Carey and Crozier as Task Assignment 009 with the United States Department of Energy. This study, Appendix IV, addresses the Fourth Wilhelm Sand and its sub units and pools. Basic pressure, production and assorted technical data were provided by the US Department of Energy staff at Elk Hills. Basic pressure production and assorted technical data were provided by the US Department of Energy staff at Elk Hills. These data were accepted as furnished with no attempt being made by Evans, Carey and Crozier for independent verification.more » This study has identified the petrophysical properties and the past productive performance of the reservoir. Primary reserves have been determined and general means of enhancing future recovery have been suggested. It is hoped that this volume can now additionally serve as a take off point for exploitation engineers to develop specific programs toward the end. 12 figs., 9 tabs.« less

Index to Nuclear Safety: a technical progress review by chronology, permuted title, and author, Volume 18 (1) through Volume 22 (6)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cottrell, W.B.; Passiakos, M.

This index to Nuclear Safety covers articles published in Nuclear Safety, Volume 18, Number 1 (January-February 1977) through Volume 22, Number 6 (November-December 1981). The index is divided into three section: a chronological list of articles (including abstracts), a permuted-title (KWIC) index, and an author index. Nuclear Safety, a bimonthly technical progress review prepared by the Nuclear Safety Information Center, covers all safety aspects of nuclear power reactors and associated facilities. Over 300 technical articles published in Nuclear Safety in the last 5 years are listed in this index.

Project FARE Task IV Report: Urban Mass Transportation Industry Financial and Operating Data Reporting System. Volume I. Task and Project Summary.

DOT National Transportation Integrated Search

1973-11-01

The report contains a description of the uniform reporting system for the urban mass transit industry designed and tested in Project FARE. It is presented in five volumes. Volume I contains a description of how Task IV was accomplished and the conclu...

Application of objective clinical human reliability analysis (OCHRA) in assessment of technical performance in laparoscopic rectal cancer surgery.

PubMed

Foster, J D; Miskovic, D; Allison, A S; Conti, J A; Ockrim, J; Cooper, E J; Hanna, G B; Francis, N K

2016-06-01

Laparoscopic rectal resection is technically challenging, with outcomes dependent upon technical performance. No robust objective assessment tool exists for laparoscopic rectal resection surgery. This study aimed to investigate the application of the objective clinical human reliability analysis (OCHRA) technique for assessing technical performance of laparoscopic rectal surgery and explore the validity and reliability of this technique. Laparoscopic rectal cancer resection operations were described in the format of a hierarchical task analysis. Potential technical errors were defined. The OCHRA technique was used to identify technical errors enacted in videos of twenty consecutive laparoscopic rectal cancer resection operations from a single site. The procedural task, spatial location, and circumstances of all identified errors were logged. Clinical validity was assessed through correlation with clinical outcomes; reliability was assessed by test-retest. A total of 335 execution errors identified, with a median 15 per operation. More errors were observed during pelvic tasks compared with abdominal tasks (p < 0.001). Within the pelvis, more errors were observed during dissection on the right side than the left (p = 0.03). Test-retest confirmed reliability (r = 0.97, p < 0.001). A significant correlation was observed between error frequency and mesorectal specimen quality (r s = 0.52, p = 0.02) and with blood loss (r s = 0.609, p = 0.004). OCHRA offers a valid and reliable method for evaluating technical performance of laparoscopic rectal surgery.

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 36: Technical uncertainty as a correlate of information use by US industry-affiliated aerospace engineers and scientists

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Glassman, Nanci A.; Affelder, Linda O.; Hecht, Laura M.; Kennedy, John M.; Barclay, Rebecca O.

1994-01-01

This paper reports the results of an exploratory study that investigated the influence of technical uncertainty on the use of information and information sources by U.S. industry-affiliated aerospace engineers and scientists in completing or solving a project, task, or problem. Data were collected through a self-administered questionnaire. Survey participants were U.S. aerospace engineers and scientists whose names appeared on the Society of Automotive Engineers (SAE) mailing list. The results support the findings of previous research and the following study assumptions. Information and information-source use differ for projects, problems, and tasks with high and low technical uncertainty. As technical uncertainty increases, information-source use changes from internal to external and from informal to formal sources. As technical uncertainty increases, so too does the use of federally funded aerospace research and development (R&D). The use of formal information sources to learn about federally funded aerospace R&D differs for projects, problems, and tasks with high and low technical uncertainty.

Monitored Natural Attenuation of Inorganic Contaminants in Ground Water Volume 1 – Technical Basis for Assessment

EPA Science Inventory

This document represents the first volume of a set of three volumes that address the technical basis and requirements for assessing the potential applicability of MNA as part of a ground-water remedy for plumes with non-radionuclide and/or radionuclide inorganic contaminants. Vo...

Freight Transportation : A Digest of Technical Papers. Volume 1.

DOT National Transportation Integrated Search

1976-10-28

This volume contains a number of technical papers dealing with intercity freight transportation. Collectively, these systems-oriented papers consider a wide range of subject matter including transportation facilitation, commodity flow, regulation, au...

76 FR 66763 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-510...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-27

... of Technical Specifications Task Force Traveler TSTF-510, Revision 2, ``Revision to Steam Generator..., Revision 2, ``Revision to Steam Generator [(SG)] Program Inspection Frequencies and Tube Sample Selection..., ``Steam Generator (SG) Program,'' Specification 5.6.7, ``Steam Generator Tube Inspection Report,'' and the...

Solar Energy Task Force Report on Education and Training.

ERIC Educational Resources Information Center

O'Connor, J. Kevin

The Solar Energy Task Force Report summarizes data, information, and discussions focusing on solar space and water heating applications. The report is intended to fill a need for curriculum and course development and direction for technical training programs, especially in vocational/technical schools and community colleges. It addresses…

76 FR 54510 - Notice of Availability of Proposed Models for Plant-Specific Adoption of Technical Specifications...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-01

... Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-500, Revision 2... Specifications Task Force (TSTF) Traveler TSTF- 500, Revision 2, ``DC Electrical Rewrite--Update to TSTF-360....8.6, ``Battery Cell Parameters.'' Additionally, a new Administrative Controls program, titled...

77 FR 58421 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-20

... Ventilation System Surveillance Requirements To Operate for 10 Hours per Month,'' Using the Consolidated Line... currently require operating the ventilation system for at least 10 continuous hours with the heaters... Technical Specifications (TSs) Task Force (TSTF) Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

77 FR 16869 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-22

... Ventilation System Surveillance Requirements to Operate for 10 hours per Month.'' DATES: Comment period....1, which currently require operating the heaters in the respective systems for at least 10... Adoption of Technical Specifications Task Force Traveler TSTF-522, Revision 0, ``Revise Ventilation System...

Obtaining Technical Support for Superfund, RCRA and Brownfields Site Issues Fact Sheet

EPA Pesticide Factsheets

EPA’s Technical Support Centers (TSCs) and other technical support services are available to Regional RemedialProject Managers, Corrective Action Staff, and On-Scene Coordinators needing specialized technical expertisefor specific tasks or projects.

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the 60's Pits'' area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

Hanford Environmental Dose Reconstruction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannon, S.D.; Finch, S.M.

1992-10-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The independent Technical Steering Panel (TSP) provides technical direction. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed from release to impact on humans (dose estimates):Source Terms, Environmental Transport, Environmental Monitoring Data, Demography, Food Consumption, and Agriculture, and Environmental Pathways and Dose Estimates.

Conceptual design of advanced central receiver power systems sodium-cooled receiver concept. Volume 1. Executive summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

The conceptual design of an advanced central receiver power system using liquid sodium as a heat transport medium has been completed by a team consisting of the Energy Systems Group (prime contractor), McDonnell Douglas, Stearns-Roger, The University of Houston, and Salt River Project. The purpose of this study was to determine the technical and economic advantages of this concept for commercial-scale power plants. This final report covers all tasks of the project. These tasks were as follows: (1) review and analysis of preliminary specification; (2) parametric analysis; (3) select commercial configuration; (4) commercial plant conceptual design; (5) assessment of commercialmore » plant; (6) advanced central receiver power system development plan; (7) program plan; (8) reports and data; (9) program management; and (10) safety analysis. A programmatic overview of the accomplishments of this program is given. The 100-MW conceptual commercial plant, the 281-MW optimum plant, and the 10-MW pilot plant are described. (WHK)« less

Upward Mobility Programs in the Service Sector for Disadvantaged and Dislocated Workers. Volume II: Technical Appendices.

ERIC Educational Resources Information Center

Tao, Fumiyo; And Others

This volume contains technical and supporting materials that supplement Volume I, which describes upward mobility programs for disadvantaged and dislocated workers in the service sector. Appendix A is a detailed description of the project methodology, including data collection methods and information on data compilation, processing, and analysis.…

Entorhinal Cortex Volume Is Associated With Dual-Task Gait Cost Among Older Adults With MCI: Results From the Gait and Brain Study.

PubMed

Sakurai, Ryota; Bartha, Robert; Montero-Odasso, Manuel

2018-05-15

Low dual-task gait performance (the slowing of gait speed while performing a demanding cognitive task) is associated with low cognitive performance and an increased risk of progression to dementia in older adults with mild cognitive impairment. However, the reason for this remains unclear. This study aimed to examine the relationship between dual-task cost and regional brain volume, focusing on the hippocampus, parahippocampal gyrus, entorhinal cortex, and motor and lateral frontal cortices in older adults with mild cognitive impairment. Forty older adults with mild cognitive impairment from the "Gait and Brain Study" were included in this study. Gait velocity was measured during single-task (ie, walking alone) and dual-task (ie, counting backwards, subtracting serial sevens, and naming animals, in addition to walking) conditions, using an electronic walkway. Regional brain volumes were derived by automated segmentation, using 3T magnetic resonance imaging. Partial rank correlation analyses demonstrated that a smaller volume of the left entorhinal cortex was associated with higher dual-task costs in counting backwards and subtracting serial sevens conditions. Subsequent logistic regression analyses demonstrated that a smaller volume of the left entorhinal cortex was independently associated with higher dual-task cost (slowing down >20% when performing cognitive task) in these two conditions. There were no other significant associations. Our results show that lower dual-task gait performance is associated with volume reduction in the entorhinal cortex. Cognitive and motor dysfunction in older adults with mild cognitive impairment may reflect a shared pathogenic mechanism, and dual-task-related gait changes might be a surrogate motor marker for Alzheimer's disease pathology.

Can technical factors explain the volume-outcome relationship in gastric bypass surgery?

PubMed

Smith, Mark D; Patterson, Emma; Wahed, Abdus S; Belle, Steven H; Courcoulas, Anita P; Flum, David; Khandelwal, Saurabh; Mitchell, James E; Pomp, Alfons; Pories, Walter J; Wolfe, Bruce

2013-01-01

The existence of a relationship between surgeon volume and patient outcome has been reported for different complex surgical operations. This relationship has also been confirmed for patients undergoing Roux-en-Y gastric bypass (RYGB) in the Longitudinal Assessment of Bariatric Surgery (LABS) study. Despite multiple studies demonstrating volume-outcome relationships, fewer studies investigate the causes of this relationship. The purpose of the present study is to understand possible explanations for the volume-outcome relationship in LABS. LABS includes a 10-center, prospective study examining 30-day outcomes after bariatric surgery. The relationship between surgeon annual RYGB volume and incidence of a composite endpoint (CE) has been published previously. Technical aspects of RYGB surgery were compared between high and low volume surgeons. The previously published model was adjusted for select technical factors. High-volume surgeons (>100 RYGBs/yr) were more likely to perform a linear stapled gastrojejunostomy, use fibrin sealant, and place a drain at the gastrojejunostomy compared with low-volume surgeons (<25 RYGBs/yr), and less likely to perform an intraoperative leak test. After adjusting for the newly identified technical factors, the relative risk of CE was .93 per 10 RYGB/yr increase in volume, compared with .90 for clinical risk adjustment alone. High-volume surgeons exhibited certain differences in technique compared with low-volume surgeons. After adjusting for these differences, the strength of the volume-outcome relationship previously found was reduced only slightly, suggesting that other factors are also involved. Copyright © 2013 American Society for Bariatric Surgery. All rights reserved.

Caudate Nucleus Volume Mediates the Link between Cardiorespiratory Fitness and Cognitive Flexibility in Older Adults

PubMed Central

Verstynen, Timothy D.; Lynch, Brighid; Miller, Destiny L.; Voss, Michelle W.; Prakash, Ruchika Shaurya; Chaddock, Laura; Basak, Chandramallika; Szabo, Amanda; Olson, Erin A.; Wojcicki, Thomas R.; Fanning, Jason; Gothe, Neha P.; McAuley, Edward; Kramer, Arthur F.; Erickson, Kirk I.

2012-01-01

The basal ganglia play a central role in regulating the response selection abilities that are critical for mental flexibility. In neocortical areas, higher cardiorespiratory fitness levels are associated with increased gray matter volume, and these volumetric differences mediate enhanced cognitive performance in a variety of tasks. Here we examine whether cardiorespiratory fitness correlates with the volume of the subcortical nuclei that make up the basal ganglia and whether this relationship predicts cognitive flexibility in older adults. Structural MRI was used to determine the volume of the basal ganglia nuclei in a group of older, neurologically healthy individuals (mean age 66 years, N = 179). Measures of cardiorespiratory fitness (VO2max), cognitive flexibility (task switching), and attentional control (flanker task) were also collected. Higher fitness levels were correlated with higher accuracy rates in the Task Switching paradigm. In addition, the volume of the caudate nucleus, putamen, and globus pallidus positively correlated with Task Switching accuracy. Nested regression modeling revealed that caudate nucleus volume was a significant mediator of the relationship between cardiorespiratory fitness, and task switching performance. These findings indicate that higher cardiorespiratory fitness predicts better cognitive flexibility in older adults through greater grey matter volume in the dorsal striatum. PMID:22900181

Task-Based EFL Language Teaching with Procedural Information Design in a Technical Writing Context

ERIC Educational Resources Information Center

Roy, Debopriyo

2017-01-01

Task-based language learning (TBLL) has heavily influenced syllabus design, classroom teaching, and learner assessment in a foreign or second language teaching context. In this English as foreign language (EFL) learning environment, the paper discussed an innovative language learning pedagogy based on design education and technical writing. In…

Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…

State Technical Committee for Accounting. Official Report.

ERIC Educational Resources Information Center

Jensen, Claudia

This report contains validated task inventory listings for accounting occupations. An introductory report in brief outline form gives background of the work of the technical committee that identified the duties and tasks. This is followed by four attachments which make up most of the document. Attachment A has two parts: (1) an accounting skills…

Benefit-Cost Analysis of Integrated Paratransit Systems : Volume 6. Technical Appendices.

DOT National Transportation Integrated Search

1979-09-01

This last volume, includes five technical appendices which document the methodologies used in the benefit-cost analysis. They are the following: Scenario analysis methodology; Impact estimation; Example of impact estimation; Sensitivity analysis; Agg...

Advanced Risk Reduction Tool (ARRT) Special Case Study Report: Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Kirsch, Paul J.; Hayes, Jane; Zelinski, Lillian

2000-01-01

This special case study report presents the Science and Engineering Technical Assessments (SETA) team's findings for exploring the correlation between the underlying models of Advanced Risk Reduction Tool (ARRT) relative to how it identifies, estimates, and integrates Independent Verification & Validation (IV&V) activities. The special case study was conducted under the provisions of SETA Contract Task Order (CTO) 15 and the approved technical approach documented in the CTO-15 Modification #1 Task Project Plan.

Hanford Environmental Dose Reconstruction Project. Monthly report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cannon, S.D.; Finch, S.M.

1992-10-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The independent Technical Steering Panel (TSP) provides technical direction. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed from release to impact on humans (dose estimates):Source Terms, Environmental Transport, Environmental Monitoring Data, Demography, Food Consumption, and Agriculture, and Environmental Pathways and Dose Estimates.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenthal, A

Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growingmore » U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing lessons learned Task 3: PV Codes and Standards 1. Serve as the national lead for development and preparation of all proposals (related to PV) to the National Electrical Code 2. Participate in the Standards Technical Panels for modules (UL1703) and inverters (UL1741) Task 4: Assess Inverter Long Term Reliability 1. Install and monitor identical inverters at SWRES and SERES 2. Operate and monitor all inverters for 5 years, characterizing all failures and performance trends Task 5: Test and Evaluation Support for Solar America Initiative 1. Provide test and evaluation services to the National Laboratories for stage gate and progress measurements of SAI TPP winners« less

Third International Mathematics and Science Study 1999 Video Study Technical Report: Volume 2--Science. Technical Report. NCES 2011-049

ERIC Educational Resources Information Center

Garnier, Helen E.; Lemmens, Meike; Druker, Stephen L.; Roth, Kathleen J.

2011-01-01

This second volume of the Third International Mathematics and Science Study (TIMSS) 1999 Video Study Technical Report focuses on every aspect of the planning, implementation, processing, analysis, and reporting of the science components of the TIMSS 1999 Video Study. The report is intended to serve as a record of the actions and documentation of…

Effects of Information Availability on Command-and-Control Decision Making: Performance, Trust, and Situation Awareness.

PubMed

Marusich, Laura R; Bakdash, Jonathan Z; Onal, Emrah; Yu, Michael S; Schaffer, James; O'Donovan, John; Höllerer, Tobias; Buchler, Norbou; Gonzalez, Cleotilde

2016-03-01

We investigated how increases in task-relevant information affect human decision-making performance, situation awareness (SA), and trust in a simulated command-and-control (C2) environment. Increased information is often associated with an improvement of SA and decision-making performance in networked organizations. However, previous research suggests that increasing information without considering the task relevance and the presentation can impair performance. We used a simulated C2 task across two experiments. Experiment 1 varied the information volume provided to individual participants and measured the speed and accuracy of decision making for task performance. Experiment 2 varied information volume and information reliability provided to two participants acting in different roles and assessed decision-making performance, SA, and trust between the paired participants. In both experiments, increased task-relevant information volume did not improve task performance. In Experiment 2, increased task-relevant information volume reduced self-reported SA and trust, and incorrect source reliability information led to poorer task performance and SA. These results indicate that increasing the volume of information, even when it is accurate and task relevant, is not necessarily beneficial to decision-making performance. Moreover, it may even be detrimental to SA and trust among team members. Given the high volume of available and shared information and the safety-critical and time-sensitive nature of many decisions, these results have implications for training and system design in C2 domains. To avoid decrements to SA, interpersonal trust, and decision-making performance, information presentation within C2 systems must reflect human cognitive processing limits and capabilities. © 2016, Human Factors and Ergonomics Society.

SUPERFUND TECHNICAL SUPPORT

EPA Science Inventory

Under this task, technical support is provided to Regional Remedial Project Managers (RPMs)/On-Scene Coordinators (OSCs) at Superfund, RCRA, and Brownfields sites contaminated with hazardous materials by the Technical Support Center (TSC) for Monitoring and Site Characterization....

78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Standard Technical Specification (STS): NUREG-1432, ``Standard Technical Specifications Combustion..., Washington, DC 20555- 0001. SUPPLEMENTARY INFORMATION: TSTF-426, Revision 5, is applicable to all Combustion...

Mining and Minerals Technical Advisory Committee on Curriculum Development. Job Clusters, Competencies and Task Analysis.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This skills inventory for mining occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from the mining industry, members of trade and professional associations, and educators. The validated task list and defined job…

Advanced Thermal Emission Imaging Systems Definition and Development

NASA Technical Reports Server (NTRS)

Blasius, Karl; Nava, David (Technical Monitor)

2002-01-01

Santa Barbara Remote Sensing (SBRS), Raytheon Company, is pleased to submit this quarterly progress report of the work performed in the third quarter of Year 2 of the Advanced THEMIS Project, July through September 2002. We review here progress in the proposed tasks. During July through September 2002 progress was made in two major tasks, Spectral Response Characterization and Flight Instrument Definition. Because of staffing problems and technical problems earlier in the program we have refocused the remaining time and budget on the key technical tasks. Current technical problems with a central piece of test equipment has lead us to request a 1 quarter extension to the period of performance. This request is being made through a separate letter independent of this report.

Supersonics--Airport Noise

NASA Technical Reports Server (NTRS)

Bridges, James

2007-01-01

At this, the first year-end meeting of the Fundamental Aeronautics Program, an overview of the Airport Noise discipline of the Supersonics Project leads the presentation of technical plans and achievements in this area of the Project. The overview starts by defining the Technical Challenges targeted by Airport Noise efforts, and the Approaches planned to meet these challenges. These are fleshed out in Elements, namely Prediction, Diagnostics, and Engineering, and broken down into Tasks. The Tasks level is where individual researchers' work is defined and from whence the technical presentations to follow this presentation come. This overview also presents the Milestones accomplished to date and to be completed in the next year. Finally, the NASA Research Announcement cooperative agreement activities are covered and tied to the Tasks and Milestones.

Carbon footprint estimator, phase II : volume I - GASCAP model & volume II - technical appendices [technical brief].

DOT National Transportation Integrated Search

2014-03-01

This study resulted in the development of the GASCAP model (the Greenhouse Gas Assessment : Spreadsheet for Transportation Capital Projects). This spreadsheet model provides a user-friendly interface for determining the greenhouse gas (GHG) emissions...

Individualized deliberate practice on a virtual reality simulator improves technical performance of surgical novices in the operating room: a randomized controlled trial.

PubMed

Palter, Vanessa N; Grantcharov, Teodor P

2014-03-01

The purpose of this study was to investigate whether individualized deliberate practice on a virtual reality (VR) simulator results in improved technical performance in the operating room. Training on VR simulators has been shown to improve technical performance in the operating room (OR). Currently described VR curricula consist of trainees practicing the same tasks until expert proficiency is reached. It has yet to be investigated whether the individualized deliberate practice, where curricula tasks vary depending on prior levels of technical proficiency, would translate into the OR. This single-blinded prospective trial randomized 16 novice surgical residents to a deliberate practice (DP) group and a conventional residency training group. Both groups performed a laparoscopic cholecystectomy in the OR that was video-recorded. Technical performance of DP group residents in the OR was assessed using 3 validated assessment tools. A score of less than 60% on any component of the assessment tool resulted in the trainee practicing a specific task on the VR simulator. The DP group practiced on the simulator as per their individualized schedule. Both groups then performed another laparoscopic cholecystectomy. A blinded expert assessed the OR recordings using a validated global rating scale. Although both groups had similar technical abilities preintervention [DP: median score, 13.5 (9.3-15.0); control: median score, 14.5 (9.3-17.8); P = 0.45], the DP residents had a superior technical performance postintervention [DP: median score, 17.0 (15.3-18.5); control: median score, 12.5 (7.5-14.0); P = 0.03]. Of 8 DP residents, 6 practiced 5 basic VR tasks (median 1 trial to pass), and 7 of 8 practiced 2 advanced tasks (median 4 trials to pass). A curriculum of deliberate individualized practice on a VR simulator improves technical performance in the OR. This has implications to greatly improve the feasibility of implementing simulation-based curricula in residency training programs, rather then having them being limited to research protocols.

Vocational Curriculum Modification. Teaching Technical Language to Learning Handicapped Students. Project HIRE: A Curriculum Management System for Instructing the Handicapped. Final Report, Volume 1.

ERIC Educational Resources Information Center

Gardner, David C.; And Others

Volume 1 of the final report on Project HIRE reports the design, development, field-testing, and refining of self-instructional packages to teach entry level technical vocabulary to learning handicapped students mainstreamed in vocational programs. Volume 2, a management handbook, reports the methods and findings concerning development of…

The Global 2000 Report to the President: Entering the Twenty-First Century. Volume Two--The Technical Report.

ERIC Educational Resources Information Center

Council on Environmental Quality, Washington, DC.

This second volume of the Global 2000 study presents a technical report of detailed projections and analyses. It is a U.S. government effort to present a long-term global perspective on population, resources, and environment. The volume has four parts. Approximately half of the report, part one, deals with projections for the future in the areas…

SELECTIVE DISSEMINATION OF INFORMATION (SDI). VOLUME I, PILOT TEST AT U.S. ARMY NATICK LABORATORIES. FINAL REPORT. ARMY TECHNICAL LIBRARY IMPROVEMENT STUDIES (ATLIS), REPORT NO. 15.

ERIC Educational Resources Information Center

BIVONA, WILLIAM A.

THIS VOLUME PRESENTS THE RESULTS OF A NINE-MONTH TEST OF A PROTOTYPE SELECTIVE DISSEMINATION OF INFORMATION (SDI) SYSTEM DEVELOPED FOR THE ARMY TECHNICAL LIBRARIES. DURING THE PILOT TEST ONE THOUSAND DOCUMENTS WERE CATALOGED, INDEXED, AND DISSEMINATED TO TWENTY-FIVE SCIENTIFIC AND TECHNICAL PERSONNEL. MATCHING OF THE INTEREST PROFILES OF THESE…

Climate Change and Water Infrastructure in Central Asia: adaptation capacities and institutional challenges

NASA Astrophysics Data System (ADS)

Abdullaev, Iskandar; Rakhmatullaev, Shavkat

2014-05-01

The paper discusses vulnerability areas of water sector in arid Central Asia due to climate change projections with particular focus on adaptation to sustainable operation of physical infrastructure capacities (from legal, institutional and technical aspects). Two types of technical installations are the main focus of this paper, i.e., electrical lift irrigation systems and water reservoirs. The first set of electrical lift infrastructure is strategic for delivering water to water users via pumps, diversion structures, vertical drainage facilities and groundwater boreholes; on the other hand, the primarily task of second set of structures is to accumulate the water resources for sectors of economy. In Central Asia, approximately, 20-50% of irrigation water is lifted, yet major of lift structures are in very poor technical conditions coupled with ever increasing of electricity tariffs. Furthermore, useful volumes capacities of water reservoirs are being severely diminished due to bio-physical geomorphologic processes, improper operational regimes and chronic financing for special in-house sedimentation surveys. Most importantly, the key argument is that irrigation sector should internalize its adaptation efforts, i.e., integrate renewable energy technologies, energy audit programs and lastly design comprehensive investment prioritization processes and programs. Otherwise, water sector will be at great risk for continued provision of fundamental services to the public, food security and industry

Advanced space power requirements and techniques. Task 1: Mission projections and requirements. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Wolfe, M. G.

1978-01-01

The objectives of this study were to: (1) develop projections of the NASA, DoD, and civil space power requirements for the 1980-1995 time period; (2) identify specific areas of application and space power subsystem type needs for each prospective user; (3) document the supporting and historical base, including relevant cost related measures of performance; and (4) quantify the benefits of specific technology projection advancements. The initial scope of the study included: (1) construction of likely models for NASA, DoD, and civil space systems; (2) generation of a number of future scenarios; (3) extraction of time phased technology requirements based on the scenarios; and (4) cost/benefit analyses of some of the technologies identified.

Students' Perception of Daylight Illumination in the School Workshop as a Determinant for Effective Students' Task Performance in Workshop Practice

ERIC Educational Resources Information Center

Amasuomo, Japo Oweikeye Morto; Alio, Abigail Ngozi

2013-01-01

The study investigated daylight illumination in the school workshop as a determinant for effective students' task performance in workshop practice. 183 NCE Technical students in 300 Level which comprised of 73 and 112 students from Federal Colleges of Education (Technical), Asaba and Omoku, Nigeria respectively during the 2008/2009 academic…

EUV mask defect inspection and defect review strategies for EUV pilot line and high volume manufacturing

NASA Astrophysics Data System (ADS)

Chan, Y. David; Rastegar, Abbas; Yun, Henry; Putna, E. Steve; Wurm, Stefan

2010-04-01

Reducing mask blank and patterned mask defects is the number one challenge for extreme ultraviolet lithography. If the industry succeeds in reducing mask blank defects at the required rate of 10X every year for the next 2-3 years to meet high volume manufacturing defect requirements, new inspection and review tool capabilities will soon be needed to support this goal. This paper outlines the defect inspection and review tool technical requirements and suggests development plans to achieve pilot line readiness in 2011/12 and high volume manufacturing readiness in 2013. The technical specifications, tooling scenarios, and development plans were produced by a SEMATECH-led technical working group with broad industry participation from material suppliers, tool suppliers, mask houses, integrated device manufacturers, and consortia. The paper summarizes this technical working group's assessment of existing blank and mask inspection/review infrastructure capabilities to support pilot line introduction and outlines infrastructure development requirements and tooling strategies to support high volume manufacturing.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-11-01

Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the 'Anaesthetists' Non-technical Skill' score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI -0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision-making). During CPR with external stressors, the team's technical performance is related to the non-technical skills of the team leader. This may have important implications for training of CPR teams. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Relationship between non-technical skills and technical performance during cardiopulmonary resuscitation: does stress have an influence?

PubMed Central

Krage, Ralf; Zwaan, Laura; Tjon Soei Len, Lian; Kolenbrander, Mark W; van Groeningen, Dick; Loer, Stephan A; Wagner, Cordula; Schober, Patrick

2017-01-01

Background Non-technical skills, such as task management, leadership, situational awareness, communication and decision-making refer to cognitive, behavioural and social skills that contribute to safe and efficient team performance. The importance of these skills during cardiopulmonary resuscitation (CPR) is increasingly emphasised. Nonetheless, the relationship between non-technical skills and technical performance is poorly understood. We hypothesise that non-technical skills become increasingly important under stressful conditions when individuals are distracted from their tasks, and investigated the relationship between non-technical and technical skills under control conditions and when external stressors are present. Methods In this simulator-based randomised cross-over study, 30 anaesthesiologists and anaesthesia residents from the VU University Medical Center, Amsterdam, the Netherlands, participated in two different CPR scenarios in random order. In one scenario, external stressors (radio noise and a distractive scripted family member) were added, while the other scenario without stressors served as control condition. Non-technical performance of the team leader and technical performance of the team were measured using the ‘Anaesthetists’ Non-technical Skill’ score and a recently developed technical skills score. Analysis of variance and Pearson correlation coefficients were used for statistical analyses. Results Non-technical performance declined when external stressors were present (adjusted mean difference 3.9 points, 95% CI 2.4 to 5.5 points). A significant correlation between non-technical and technical performance scores was observed when external stressors were present (r=0.67, 95% CI 0.40 to 0.83, p<0.001), while no evidence for such a relationship was observed under control conditions (r=0.15, 95% CI −0.22 to 0.49, p=0.42). This was equally true for all individual domains of the non-technical performance score (task management, team working, situation awareness, decision-making). Conclusions During CPR with external stressors, the team’s technical performance is related to the non-technical skills of the team leader. This may have important implications for training of CPR teams. PMID:28844039

Looking Backwards--Looking Forward. Volume V: July, 1989-June, 1990. A Collection of Essays: Recommendations Related to Education in General and Vocational-Technical Education in Particular.

ERIC Educational Resources Information Center

North Carolina State Advisory Council on Vocational Education, Raleigh.

This is the fifth of five volumes of essays in the form of recommendations for the improvement of programs, services, and activities offered through vocational-technical education in North Carolina. The volume explains the rationale for and comments on 15 recommendations prepared by the State Advisory Council on Vocational Education for fiscal…

Test Plan Development for Plastic Ammunition Containers. Volume 1

DTIC Science & Technology

1989-03-15

1850 Black Canyon Stage¶I Packaging division (SMCAR-AEP) Picatinny Phoenix, Arizona 85027 Arsenal, New Jersey 07806-5000 86. NAME OF FUNDING...packaging containers. The report is presented in two separate volumes. Volume I contains the Final Technical Report and includes the analysis of... Division of the U.S. Army Armament Research, Development and Engineering Center. Mr. Jasper C. Griggs and Mr. D. E. Jones served as technical consultants

SeaWiFS technical report series. Volume 6: SeaWiFS technical report series cumulative index: Volumes 1-5

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1992-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight year mission. SeaWiFS is expected to be launched in August 1993, on the Sea Star satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the NASA/Goddard Space Flight Center (GSFC) has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memoranda Number 104566. All reports published are volumes within the series. This volume serves as a reference, or guidebook, to the previous five volumes and consists of four main sections including an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is our intention to publish a summary index of this type after every five volumes in the series. This will cover the topics published in all previous editions of the indices, that is, each new index will include all of the information contained in the preceding indices.

Techniques for predicting high-risk drivers for alcohol countermeasures. Volume 1, Technical report

DOT National Transportation Integrated Search

1979-05-01

This technical report, a companion to the Volume II User Manual by the same name describes the development and testing of predictive models for identifying individual with a high risk of alcohol/related (A/R) crash involvement. From a literature revi...

Automation Applications in an Advanced Air Traffic Management System : Volume 3. Methodology for Man-Machine Task Allocation

DOT National Transportation Integrated Search

1974-08-01

Volume 3 describes the methodology for man-machine task allocation. It contains a description of man and machine performance capabilities and an explanation of the methodology employed to allocate tasks to human or automated resources. It also presen...

Payload analysis for space shuttle applications (study 2.2). Volume 3: Payload system operations analysis (task 2.2.1). [payload system operations analysis for shuttles and space tugs

NASA Technical Reports Server (NTRS)

1972-01-01

The technical and cost analysis that was performed for the payload system operations analysis is presented. The technical analysis consists of the operations for the payload/shuttle and payload/tug, and the spacecraft analysis which includes sortie, automated, and large observatory type payloads. The cost analysis includes the costing tradeoffs of the various payload design concepts and traffic models. The overall objectives of this effort were to identify payload design and operational concepts for the shuttle which will result in low cost design, and to examine the low cost design concepts to identify applicable design guidelines. The operations analysis examined several past and current NASA and DoD satellite programs to establish a shuttle operations model. From this model the analysis examined the payload/shuttle flow and determined facility concepts necessary for effective payload/shuttle ground operations. The study of the payload/tug operations was an examination of the various flight timelines for missions requiring the tug.

Autonomic Correlates of Speech Versus Nonspeech Tasks in Children and Adults

PubMed Central

Arnold, Hayley S.; MacPherson, Megan K.; Smith, Anne

2015-01-01

Purpose To assess autonomic arousal associated with speech and nonspeech tasks in school-age children and young adults. Method Measures of autonomic arousal (electrodermal level, electrodermal response amplitude, blood pulse volume, and heart rate) were recorded prior to, during, and after the performance of speech and nonspeech tasks by twenty 7- to 9-year-old children and twenty 18- to 22-year-old adults. Results Across age groups, autonomic arousal was higher for speech tasks compared with nonspeech tasks, based on peak electrodermal response amplitude and blood pulse volume. Children demonstrated greater relative arousal, based on heart rate and blood pulse volume, for nonspeech oral motor tasks than adults but showed similar mean arousal levels for speech tasks as adults. Children demonstrated sex differences in autonomic arousal; specifically, autonomic arousal remained high for school-age boys but not girls in a more complex open-ended narrative task that followed a simple sentence production task. Conclusions Speech tasks elicit greater autonomic arousal than nonspeech tasks, and children demonstrate greater autonomic arousal for nonspeech oral motor tasks than adults. Sex differences in autonomic arousal associated with speech tasks in school-age children are discussed relative to speech-language differences between boys and girls. PMID:24686989

IVHS Countermeasures for Rear-End Collisions, Task 1 Vol. III: 1991 NASS CDS Case Analysis

DOT National Transportation Integrated Search

1994-02-15

This report is from the NHTSA sponsored program, "IVHS Countermeasures for Rear-End Collisions". The Task 1 Interim Report consists of six volumes. This Volume, Volume III, 1991 NASS CDS Clinical Case Analysis presents the results of a clinical case ...

Engineering, technical, and management support services

NASA Technical Reports Server (NTRS)

1994-01-01

This report summarizes by task the engineering, technical, and management support services provided by Vitro Corporation to NASA Headquarters Office of Safety, Reliability, Maintainability, and Quality Assurance (now called Office of Safety and Mission Assurance (OSMA)) (Code Q) under Contract Number NASW-4311 from the period February 10, 1994. Each task summary includes significant Vitro accomplishments, conclusions, and recommendations for future efforts in each of the divisions within OSMA.

Optical properties of fly ash. Volume 1, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Self, S.A.

1994-12-01

Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executivemore » summary of the whole program followed by the dissertation of Ghosal. Volume 1 contains the dissertation of Ghosal which covers the characterization of fly ash and the measurements of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.« less

Unified Technical Concepts. Application Modules Volume II.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the second of two volumes, consists of 45 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force…

National Data Program for the Marine Environment Technical Development Plan. Final Report, Volume Two.

ERIC Educational Resources Information Center

System Development Corp., Santa Monica, CA.

A national data program for the marine environment is recommended. Volume 2 includes: (1) objectives, scope, and methodology; (2) summary of the technical development plan; (3) agency development plans - Great Lakes and coastal development and (4) marine data network development plans. (Author)

Improvement of mathematical models for simulation of vehicle handling : volume 7 : technical manual for the general simulation

DOT National Transportation Integrated Search

1980-03-01

This volume is the technical manual for the general simulation. Mathematical modelling of the vehicle and of the human driver is presented in detail, as are differences between the APL simulation and the current one. Information on model validation a...

Development of Hydrogen Education Programs for Government Officials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baxter, Shannon; Keller, Russ

1. Subcontractor/Technical Subject Matter Expert (Tasks 1-3) 2. Technical lead for LFG cleanup and hydrogen production systems Support for Feasibility Study 3. Technical Lead for Feasibility Study Coordination of site preparation activities for all project equipment 4. Host site

An investigation of wing buffeting response at subsonic and transonic speeds: Phase 1: F-111A flight data analysis. Volume 1: Summary of technical approach, results and conclusions

NASA Technical Reports Server (NTRS)

Benepe, D. B.; Cunningham, A. M., Jr.; Dunmyer, W. D.

1978-01-01

The structural response to aerodynamic buffet during moderate to high-g maneuvers at subsonic and transonic speeds was investigated. The investigation is reported in three volumes. This volume presents a summary of the investigation with a complete description of the technical approach, description of the aircraft, its instrumentation, the data reduction procedures, results and conclusion.

Forecasting the Future Food Service World of Work. Final Report. Volume III. Technical Papers on the Future of the Food Service Industry. Service Management Reports.

ERIC Educational Resources Information Center

Powers, Thomas F., Ed.; Swinton, John R., Ed.

This third and final volume of a study on the future of the food service industry contains the technical papers on which the information in the previous two volumes was based. The papers were written by various members of the Pennsylvania State University departments of economics, food science, nutrition, social psychology, and engineering and by…

Two Approaches to Measuring Task Interdependence in Elementary Schools.

ERIC Educational Resources Information Center

Charters, W. W., Jr.

This report compares two approaches to measuring task interdependence, a theoretically fruitful concept for analyzing an organization's technical system. Task interdependence exists among operating personnel in the degree that task performance of one operative constrains, augments, or otherwise poses contingencies for the performance of another.…

Surgical Practical Skills Learning Curriculum: Implementation and Interns' Confidence Perceptions.

PubMed

Acosta, Danilo; Castillo-Angeles, Manuel; Garces-Descovich, Alejandro; Watkins, Ammara A; Gupta, Alok; Critchlow, Jonathan F; Kent, Tara S

To provide an overview of the practical skills learning curriculum and assess its effects over time on the surgical interns' perceptions of their technical skills, patient management, administrative tasks, and knowledge. An 84-hour practical skills curriculum composed of didactic, simulation, and practical sessions was implemented during the 2015 to 2016 academic year for general surgery interns. Totally, 40% of the sessions were held during orientation, whereas the remainder sessions were held throughout the academic year. Interns' perceptions of their technical skills, administrative tasks, patient management, and knowledge were assessed by the practical skills curriculum residents' perception survey at various time points during their intern year (baseline, midpoint, and final). Interns were also asked to fill out an evaluation survey at the completion of each session to obtain feedback on the curriculum. General Surgery Residency program at a tertiary care academic institution. 20 General Surgery categorical and preliminary interns. Significant differences were found over time in interns' perceptions on their technical skills, patient management, administrative tasks, and knowledge (p < 0.001 for all). The results were also statistically significant when accounting for a prior boot camp course in medical school, intern status (categorical or preliminary), and gender (p < 0.05 for all). Differences in interns' perceptions occurred both from baseline to midpoint, and from midpoint to final time point evaluations (p < 0.001 for all). Prior surgical boot camp in medical school status, intern status (categorical vs. preliminary), and gender did not differ in the interns' baseline perceptions of their technical skills, patient management, administrative tasks, and knowledge (p > 0.05 for all). Implementation of a Practical Skills Curriculum in surgical internships can improve interns' confidence perception on their technical skills, patient management skills, administrative tasks, and knowledge. Copyright © 2018. Published by Elsevier Inc.

IVHS Countermeasures for Rear-End Collision, Task 1 Vol. V: 1985 NASS Case Analysis

DOT National Transportation Integrated Search

1994-02-15

The Task 1 Interim Report consists of six volumes. This Volume, Volume V, 1985 NASS Analysis, presents the results of the analysis of the 1985 NASS crash data. Data from 1985 was selected for analysis because it provided more insight into roadway var...

Technical Progress Report on Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-06-30

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st and July 30th 2006. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool. Work is being carried out in Brazil, Belize, Chile, Peru and the USA.« less

The space station assembly phase: Flight telerobotic servicer feasibility, volume 1

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Gyamfi, Max A.; Volkmer, Kent; Zimmerman, Wayne F.

1987-01-01

The question is addressed which was raised by the Critical Evaluation Task Force (CETF) analysis of the space station: if a Flight Telerobotic Servicer (FTS) of a given technical risk could be built for use during space station assembly, could it save significant extravehicular (EVA) resources. Key issues and trade-offs associated with using an FTS to aid in space station assembly phase tasks such as construction and servicing are identified. A methodology is presented that incorporates assessment of candidate assembly phase tasks, telerobotics performance capabilities, development costs, operational constraints (STS and proximity operations), maintenance, attached payloads, and polar platforms. A discussion of the issues is presented with focus on potential FTS roles: (1) as a research-oriented test bed to learn more about space usage of telerobotics; (2) as a research-based test bed with an experimental demonstration orientation and limited assembly and servicing applications; or (3) as an operational system to augment EVA, to aid the construction of the space station, and to reduce the programmatic (schedule) risk by increasing the flexibility of mission operations. During the course of the study, the baseline configuration was modified into Phase 1 (a station assembled in 12 flights), and Phase 2 (a station assembled over a 30 flight period) configuration.

Guidance, Navigation and Control Digital Emulation Technology Laboratory. Volume 1. Part 2. Task 1: Digital Emulation Technology Laboratory

DTIC Science & Technology

1991-09-27

AD-A241 692 II I] II I11 ANNUAL REPORT VOLUME 1 PART 2 TASK 1: DIGITAL EMULATION TECHNOLOGY LABORATOIRY REPORT NO. AR-0142-91-001 September 27, 1991... DIGITAL EMULATION TECHNOLOGY LABORATORY Contract No. DASG60-89-C-0142 Sponsored By The United States Army ? trategic Defense Command COMPUTER...ANNUAL REPORT VOLUME 1 PART 2 TASK 1: DIGITAL EMULATION TECHNOLOGY LABORATORY September 27, 1991 Authors Thomas R. Collins and Stephen R. Wachtel

Aging Study Of EPDM O-Ring Material For The H1616 Shipping Package - Three Year Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stefek, T.; Daugherty, W.; Skidmore, E.

This is a 3-year status report for tasks carried out per Task Technical Plan SRNL-STI-2011-00506. A series of tasks/experiments were performed at the Savannah River National Laboratory (SRNL) to monitor the aging performance of ethylene propylene diene monomer (EPDM) O-rings used in the H1616 shipping package. The test data provide a technical basis to extend the annual maintenance of the H1616 shipping package to three years and to predict the life of the EPDM O-rings at the bounding service conditions.

Design of impact-resistant boron/aluminum large fan blade

NASA Technical Reports Server (NTRS)

Salemme, C. T.; Yokel, S. A.

1978-01-01

The technical program was comprised of two technical tasks. Task 1 encompassed the preliminary boron/aluminum fan blade design effort. Two preliminary designs were evolved. An initial design consisted of 32 blades per stage and was based on material properties extracted from manufactured blades. A final design of 36 blades per stage was based on rule-of-mixture material properties. In Task 2, the selected preliminary blade design was refined via more sophisticated analytical tools. Detailed finite element stress analysis and aero performance analysis were carried out to determine blade material frequencies and directional stresses.

A Naval Task Force Performance Assessment Methodology

DTIC Science & Technology

1991-11-01

methodology combines two fundamental and intuitively appealing approaches to problem solving: (1) the systems approach with its focus on a system as a whole...Naval Coastal Systems Center AD-A242 915 Panama City, Florida 32407-5000 IlhIIiRjjq TECHNICAL MEMORANDUM NCSC TM 592-91 NOVEMBER 1991 A NAVAL TASK... SYSTEMS CENTER PANAMA CITY, FLORIDA 32407-5000 CAPT DAVID P. FITCH, USN MR. TED C. BUCKLEY Commanding Officer Technical Director ADMINISTRATIVE

Heavy vehicle driver workload assessment. Task 3, task analysis data collection

DOT National Transportation Integrated Search

This technical report consists of a collection of task analytic data to support heavy vehicle driver workload assessment and protocol development. Data were collected from professional drivers to provide insights into the following issues: the meanin...

Advanced Mirror Technology Development (AMTD) Project Status

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2014-01-01

To date, AMTD Phase 1 has accomplished all of its technical tasks on-schedule and on-budget. AMTD was awarded a Phase 2 contract. We are now performing Phase 2 tasks along with those tasks continued from Phase 1.

Advanced transportation system studies technical area 2(TA-2): Heavy lift launch vehicle development. volume 1; Executive summary

NASA Technical Reports Server (NTRS)

McCurry, J.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 1, provides a summary description of the technical activities that were performed over the entire contract duration, covering three distinct launch vehicle definition activities: heavy-lift (300,000 pounds injected mass to low Earth orbit) launch vehicles for the First Lunar Outpost (FLO), medium-lift (50,000-80,000 pounds injected mass to low Earth orbit) launch vehicles, and single-stage-to-orbit (SSTO) launch vehicles (25,000 pounds injected mass to a Space Station orbit).

Results from the 2001 National Household Survey on Drug Abuse. Volume I: Summary of National Findings [and] Volume II: Technical Appendices and Selected Data Tables [and] Volume III: Detailed Tables.

ERIC Educational Resources Information Center

Substance Abuse and Mental Health Services Administration (DHHS/PHS), Rockville, MD. Office of Applied Studies.

This document presents the technical appendices and selected data tables from the 2001 National Household Survey on Drug Abuse. Included are a description of the survey; statistical methods and limitations of the data; effects of changes in survey protocol on trend measurement; key definitions for the 1999-2001 survey years; and other sources of…

Unified Technical Concepts. Application Modules Volume I.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Unified Technical Concepts (UTC) is a modular system for teaching applied physics in two-year postsecondary technician programs. This UTC laboratory textbook, the first of two volumes, consists of 56 learning modules dealing with basic concepts of physics. Addressed in the individual chapters of the guide are the following topics: force, work,…

Technical Reports (Part I). End of Project Report, 1968-1971, Volume III.

ERIC Educational Resources Information Center

Western Nevada Regional Education Center, Lovelock.

The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information Systems of the Western Nevada Regional Education Center (WN-REC) funded by a Title III (Elementary and Secondary Education Act) grant. These reports describe methods of interpreting the printouts from the Student Information System;…

PITTSBURGH TECHNICAL HEALTH TRAINING INSTITUTE DEMONSTRATION PROJECT. FINAL REPORT, VOLUME II.

ERIC Educational Resources Information Center

KISHKUNAS, LOUIS J.

APPENDIXES TO THE "FINAL REPORT," VOLUME I (VT 005 511), ARE INCLUDED--(1) A SCHEMATIC REPRESENTATION OF CURRICULUM DEVELOPMENT, (2) TECHNICAL BEHAVIOR CHECKLISTS, (3) PERFORMANCE INVENTORY FORMS USED IN ON-THE-JOB OBSERVATIONS, (4) REPORT FORM FOR TYPICAL JOB BEHAVIOR OF EMPLOYEE, (5) COOPERATING AREA HEALTH INSTITUTIONS, (6) TABLES OF Z SCORES…

TFaNS Tone Fan Noise Design/Prediction System. Volume 1; System Description, CUP3D Technical Documentation and Manual for Code Developers

NASA Technical Reports Server (NTRS)

Topol, David A.

1999-01-01

TFaNS is the Tone Fan Noise Design/Prediction System developed by Pratt & Whitney under contract to NASA Lewis (presently NASA Glenn). The purpose of this system is to predict tone noise emanating from a fan stage including the effects of reflection and transmission by the rotor and stator and by the duct inlet and nozzle. These effects have been added to an existing annular duct/isolated stator noise prediction capability. TFaNS consists of: The codes that compute the acoustic properties (reflection and transmission coefficients) of the various elements and write them to files. Cup3D: Fan Noise Coupling Code that reads these files, solves the coupling problem, and outputs the desired noise predictions. AWAKEN: CFD/Measured Wake Postprocessor which reformats CFD wake predictions and/or measured wake data so it can be used by the system. This volume of the report provides technical background for TFaNS including the organization of the system and CUP3D technical documentation. This document also provides information for code developers who must write Acoustic Property Files in the CUP3D format. This report is divided into three volumes: Volume I: System Description, CUP3D Technical Documentation, and Manual for Code Developers; Volume II: User's Manual, TFaNS Vers. 1.4; Volume III: Evaluation of System Codes.

Multi-Task Project to Provide Research Support for Human Research and Engineering Goals Identified by the Army

DTIC Science & Technology

2009-06-01

Jefferson City, MO Phone:573-681-5126 E-mail: rooneyi(a>lincolnu.edu Principle Investigators for contract’s 5 Task Areas: Task I : James Rooney...identified Tasks all structured within a single contract. This contract contained Five Task areas: Task I was an administrative task; Task II-V were...Manager’s Overview of the Report (Task I ) 3. Summary Final Budget Invoice and Budget unspent balance 4. Technical Reports of the Research Tasks (II - V

Develop a Comprehensive Technical Training and Data Collection Program for Structural Welders and Fitters: Technical Proposal

DTIC Science & Technology

2006-05-30

implementation Final Report 4 TECHNICAL PLAN AND RESULTS Task 1: Initiate the Project Management System Two senior NGSS production management...1 Technical Plan and Results...Third the system is hosted on a handheld unit which provides the foremen with an efficient daily planning tool. The Pilot System which entails

Technical Writing Practically Unified through Industry.

ERIC Educational Resources Information Center

Houston, Linda S.

Two technical writing courses at a two-year agricultural college were designed to meet the individualized needs of students in various agricultural studies in the animal industries, horticulture, agricultural business, and agricultural mechanics. Offering a technical writing program based upon the writing tasks of the students' intended…

TurboTech Technical Evaluation Automated System

NASA Technical Reports Server (NTRS)

Tiffany, Dorothy J.

2009-01-01

TurboTech software is a Web-based process that simplifies and semiautomates technical evaluation of NASA proposals for Contracting Officer's Technical Representatives (COTRs). At the time of this reporting, there have been no set standards or systems for training new COTRs in technical evaluations. This new process provides boilerplate text in response to interview style questions. This text is collected into a Microsoft Word document that can then be further edited to conform to specific cases. By providing technical language and a structured format, TurboTech allows the COTRs to concentrate more on the actual evaluation, and less on deciding what language would be most appropriate. Since the actual word choice is one of the more time-consuming parts of a COTRs job, this process should allow for an increase in quantity of proposals evaluated. TurboTech is applicable to composing technical evaluations of contractor proposals, task and delivery orders, change order modifications, requests for proposals, new work modifications, task assignments, as well as any changes to existing contracts.

Effects of VR system fidelity on analyzing isosurface visualization of volume datasets.

PubMed

Laha, Bireswar; Bowman, Doug A; Socha, John J

2014-04-01

Volume visualization is an important technique for analyzing datasets from a variety of different scientific domains. Volume data analysis is inherently difficult because volumes are three-dimensional, dense, and unfamiliar, requiring scientists to precisely control the viewpoint and to make precise spatial judgments. Researchers have proposed that more immersive (higher fidelity) VR systems might improve task performance with volume datasets, and significant results tied to different components of display fidelity have been reported. However, more information is needed to generalize these results to different task types, domains, and rendering styles. We visualized isosurfaces extracted from synchrotron microscopic computed tomography (SR-μCT) scans of beetles, in a CAVE-like display. We ran a controlled experiment evaluating the effects of three components of system fidelity (field of regard, stereoscopy, and head tracking) on a variety of abstract task categories that are applicable to various scientific domains, and also compared our results with those from our prior experiment using 3D texture-based rendering. We report many significant findings. For example, for search and spatial judgment tasks with isosurface visualization, a stereoscopic display provides better performance, but for tasks with 3D texture-based rendering, displays with higher field of regard were more effective, independent of the levels of the other display components. We also found that systems with high field of regard and head tracking improve performance in spatial judgment tasks. Our results extend existing knowledge and produce new guidelines for designing VR systems to improve the effectiveness of volume data analysis.

First annual report SHRP C103 task 4 : rapid repair techniques.

DOT National Transportation Integrated Search

1989-01-01

The objective of task four is to develop technically and economically feasible methods of concrete bridge deck protection, rehabilitation, and replacement. The objective of the task will be accomplished through a progression of six subtasks. The subt...

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD). Volume 1A: Summary

NASA Technical Reports Server (NTRS)

Miller, R. E., Jr.; Redhed, D. D.; Kawaguchi, A. S.; Hansen, S. D.; Southall, J. W.

1973-01-01

IPAD was defined as a total system oriented to the product design process. This total system was designed to recognize the product design process, individuals and their design process tasks, and the computer-based IPAD System to aid product design. Principal elements of the IPAD System include the host computer and its interactive system software, new executive and data management software, and an open-ended IPAD library of technical programs to match the intended product design process. The basic goal of the IPAD total system is to increase the productivity of the product design organization. Increases in individual productivity were feasible through automation and computer support of routine information handling. Such proven automation can directly decrease cost and flowtime in the product design process.

International data collection and analysis. Task 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-04-01

Commercial nuclear power has grown to the point where 13 nations now operate commercial nuclear power plants. Another four countries should join this list before the end of 1980. In the Nonproliferation Alternative Systems Assessment Program (NASAP), the US DOE is evaluating a series of alternate possible power systems. The objective is to determine practical nuclear systems which could reduce proliferation risk while still maintaining the benefits of nuclear power. Part of that effort is the development of a data base denoting the energy needs, resources, technical capabilities, commitment to nuclear power, and projected future trends for various non-US countries.more » The data are presented by country for each of 28 non-US countries. This volume contains compiled data on Mexico, Netherlands, Pakistan, Philippines, South Africa, South Korea, and Spain.« less

"Surgery interrupted": The effect of multitasking on cognitive and technical tasks in medical students.

PubMed

Evans, C H; Schneider, E; Shostrom, V; Schenarts, P J

2017-02-01

Today's medical learners are Millennials, and reportedly, multitasking pros. We aim to evaluate effect of multitasking on cognitive and technical skills. 16 medical students completed a mock page and laceration closure separately on day 1 and day 13, and in parallel on day 14. Suturing was graded using GRS and mock pages scored. Total time, suturing and loading times, and percent correct on mock page were compared. Percent correct on mock page improved from days 1-13 and 14 (p < 0.01 and 0.04). GRS improved from days 1-13 and 14 (p = 0.04 and <0.01). Total time suturing was similar on all days. However, time suturing during the mock page on day 14 was prolonged compared to before mock page (p = 0.01). Medical students can complete cognitive and technical tasks in parallel, without compromising acceptability. However, multitasking results in longer times to complete the complex component of the technical task. Copyright © 2016 Elsevier Inc. All rights reserved.

Organizational Policy Decisions as a Function of Individual Differences and Task Design: Maintenance Tasks. Technical Report No. 10.

ERIC Educational Resources Information Center

O'Connor, Edward J.; And Others

Ninety subjects completed identical simulated maintenance tasks under two experimental conditions. In the high job structural attribute condition subjects were told that the task was high in learning new skills, responsibility, feedback, and task identity; while in the low job structural condition they were told the opposite. Results indicated the…

Driver Education Task Analysis. Volume I: Task Descriptions. Final Report (August 1969-July 1970).

ERIC Educational Resources Information Center

McKnight, A. James; Adams, Bert B.

This resource guide is the first of a 4-volume report dealing with the development of driver education objectives through an analysis of the driver's task. Included are a detailed description of the behaviors required of passenger car drivers, rated criticalities of these behaviors, and items of supporting information relating to driver…

Solar Energy Task Force Report: Technical Training Guidelines.

ERIC Educational Resources Information Center

O'Connor, Kevin

This task force report offers guidelines and information for the development of vocational education programs oriented to the commercial application of solar energy in water and space heating. After Section I introduces the Solar Energy Task Force and its activities, Section II outlines the task force's objectives and raises several issues and…

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

Optical properties of fly ash. Volume 2, Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Self, S.A.

1994-12-01

Research performed under this contract was divided into four tasks under the following headings: Task 1, Characterization of fly ash; Task 2, Measurements of the optical constants of slags; Task 3, Calculations of the radiant properties of fly ash dispersions; and Task 4, Measurements of the radiant properties of fly ash dispersions. Tasks 1 and 4 constituted the Ph.D. research topic of Sarbajit Ghosal, while Tasks 2 and 3 constituted the Ph.D. research topic of Jon Ebert. Together their doctoral dissertations give a complete account of the work performed. This final report, issued in two volumes consists of an executivemore » summary of the whole program followed by the dissertation of Ghosal and Ebert. Volume 2 contains the dissertation of Ebert which covers the measurements of the optical constants of slags, and calculations of the radiant properties of fly ash dispersions. A list of publications and conference presentations resulting from the work is also included.« less

Spectrometric Analysis for Pulse Jet Mixer Testing

DOE Office of Scientific and Technical Information (OSTI.GOV)

ZEIGLER, KRISTINE

2004-07-12

The Analytical Development Section (ADS) was tasked with providing support for a Hanford River Protection Program-Waste Treatment Program (RPP-WTP) project test involving absorption analysis for non-Newtonian pulse jet mixer testing for small scale (PJM) and prototype (CRV) tanks with sparging. Tanks filled with clay were mixed with various amounts of powdered dye as a tracer. The objective of the entire project was to determine the best mixing protocol (nozzle velocity, number of spargers used, total air flow, etc.) by determining the percent mixed volume through the use of an ultraviolet-visible (UV-Vis) spectrometer. The dye concentration within the sample could bemore » correlated to the volume fraction mixed in the tank. Samples were received in vials, a series of dilutions were generated from the clay, allowed to equilibrate, then centrifuged and siphoned for the supernate liquid to analyze by absorption spectroscopy. Equilibration of the samples and thorough mixing of the samples were a continuous issue with dilution curves being difficult to obtain. Despite these technical issues, useful data was obtained for evaluation of various mix conditions.« less

Satellite voice broadcast. Volume 2: System study

NASA Technical Reports Server (NTRS)

Bachtell, E. E.; Bettadapur, S. S.; Coyner, J. V.; Farrell, C. E.

1985-01-01

The Technical Volume of the Satellite Broadcast System Study is presented. Designs are synthesized for direct sound broadcast satellite systems for HF-, VHF-, L-, and Ku-bands. Methods are developed and used to predict satellite weight, volume, and RF performance for the various concepts considered. Cost and schedule risk assessments are performed to predict time and cost required to implement selected concepts. Technology assessments and tradeoffs are made to identify critical enabling technologies that require development to bring technical risk to acceptable levels for full scale development.

U.C. Davis high energy particle physics research: Technical progress report -- 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

Resource Planning Model | Energy Analysis | NREL

Science.gov Websites

balancing authority. An image of a overlapping circles labelled Resource, Technical, Economic, and Market competing electricity technologies. An image of a overlapping circles labelled Resource, Technical, Economic ; Federal Resource Planning. Volume 1: Sectoral, Technical, and Economic Trends, NREL Technical Report (2016

A Comparative Analysis of Postsecondary Technical Education in Texas. Phase I, Volume II--Appendices.

ERIC Educational Resources Information Center

Groves, Cecil L.; And Others

In response to concerns of unnecessary duplication in programs offered by Texas community/junior colleges and the Texas State Technical College (TSTC) system, TSTC conducted an examination of curricula, enrollments, and outcomes for both systems. This document provides the second volume of the study, containing the data tables used to generate the…

Technical Reports (Part II). End of Project Report, 1968-1971, Volume IV.

ERIC Educational Resources Information Center

Western Nevada Regional Education Center, Lovelock.

The pamphlets included in this volume are technical reports prepared as outgrowths of the Student Information System of the Western Nevada Regional Education Center funded by a Title III grant under the Elementary and Secondary Education Act of 1965. These reports demonstrate the use of the stored data; methods of interpreting the printouts from…

Sheet Metal Specialist 13-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Chanute AFB Technical Training Center, IL.

This course, adapted from military curriculum materials for use in vocational and technical education, provides training in the theory and practice of sheet metal work. Designed for student self-instruction (such as a correspondence course), the text consists of four volumes. Volume 1 discusses shop mathematics, measurement and layout tools,…

Carpentry I, 3-8A. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Army Engineer School, Fort Belvoir, VA.

This individualized, self-paced correspondence course in carpentry has been adapted from military curriculum materials for use in vocational and technical education programs. This first volume of a two-volume set is designed to present the theory portion of carpentry and basic skills. The Carpentry I course contains four lessons. Lesson l, Job…

Productivity and technical efficiency of suckler beef production systems: trends for the period 1990 to 2012.

PubMed

Veysset, P; Lherm, M; Roulenc, M; Troquier, C; Bébin, D

2015-12-01

Over the past 23 years (1990 to 2012), French beef cattle farms have expanded in size and increased labour productivity by over 60%, chiefly, though not exclusively, through capital intensification (labour-capital substitution) and simplifying herd feeding practices (more concentrates used). The technical efficiency of beef sector production systems, as measured by the ratio of the volume value (in constant euros) of farm output excluding aids to volume of intermediate consumption, has fallen by nearly 20% while income per worker has held stable thanks to subsidies and the labour productivity gains made. This aggregate technical efficiency of beef cattle systems is positively correlated to feed self-sufficiency, which is in turn negatively correlated to farm and herd size. While volume of farm output per hectare of agricultural area has not changed, forage feed self-sufficiency decreased by 6 percentage points. The continual increase in farm size and labour productivity has come at a cost of lower production-system efficiency - a loss of technical efficiency that 20 years of genetic, technical, technological and knowledge-driven progress has barely managed to offset.

Role of Scientific and Technical Libraries in Education and Technical Creative Work of the Soviet People.

ERIC Educational Resources Information Center

Tyshkevich, N. I.

Emphasis is placed on the role of scientific and technical libraries in the education of Soviet workers. One of the main tasks of technical libraries is to educate workers to respect their professions, and to maintain communistic attitudes towards labor. Librarians acquaint younger workers with literature on the history of their plants with…

Planning and Managing Learning Tasks and Activities. Advances in Research on Teaching. Volume 3.

ERIC Educational Resources Information Center

Brophy, Jere, Ed.

This publication is the third volume in the "Advanced in Research on Teaching" series, which has been established to provide state-of-the-art conceptualization and analysis of the processes involved in functioning as a classroom teacher. This volume focuses on the planning and managing of learning tasks and activities, in particular,…

Patterns of Lung Volume Use during an Extemporaneous Speech Task in Persons with Parkinson Disease

ERIC Educational Resources Information Center

Bunton, K.

2005-01-01

This study examined patterns of lung volume use in speakers with Parkinson disease (PD) during an extemporaneous speaking task. The performance of a control group was also examined. Behaviors described are based on acoustic, kinematic and linguistic measures. Group differences were found in breath group duration, lung volume initiation, and lung…

Reference values for pulmonary diffusing capacity for adult native Finns.

PubMed

Kainu, Annette; Toikka, Jyri; Vanninen, Esko; Timonen, Kirsi L

2017-04-01

Measurement standards for pulmonary diffusing capacity were updated in 2005 by the ATS/ERS Task Force. However, in Finland reference values published in 1982 by Viljanen et al. have been used to date. The main aim of this study was to produce updated reference models for single-breath diffusing capacity for carbon monoxide for Finnish adults. Single-breath diffusing capacity for carbon monoxide was measured in 631 healthy non-smoking volunteers (41.5% male). Reference values for diffusing capacity (DLCO), alveolar volume (VA), diffusing capacity per unit of lung volume (DLCO/VA), and lung volumes were calculated using a linear regression model. Previously used Finnish reference values were found to produce too low predicted values, with mean predicted DLCO 111.0 and 104.4%, and DLCO/VA of 103.5 and 102.7% in males and females, respectively. With the European Coalition for Steel and Coal (ECSC) reference values there was a significant sex difference in DLCO/VA with mean predicted 105.4% in males and 92.8% in females (p < .001). New reference values for DLCO, DLCO/VA, VA, vital capacity (VC), inspiratory vital capacity (IVC), and inspiratory capacity (IC) are suggested for clinical use to replace technically outdated reference values for clinical applications.

Espina: A Tool for the Automated Segmentation and Counting of Synapses in Large Stacks of Electron Microscopy Images

PubMed Central

Morales, Juan; Alonso-Nanclares, Lidia; Rodríguez, José-Rodrigo; DeFelipe, Javier; Rodríguez, Ángel; Merchán-Pérez, Ángel

2011-01-01

The synapses in the cerebral cortex can be classified into two main types, Gray's type I and type II, which correspond to asymmetric (mostly glutamatergic excitatory) and symmetric (inhibitory GABAergic) synapses, respectively. Hence, the quantification and identification of their different types and the proportions in which they are found, is extraordinarily important in terms of brain function. The ideal approach to calculate the number of synapses per unit volume is to analyze 3D samples reconstructed from serial sections. However, obtaining serial sections by transmission electron microscopy is an extremely time consuming and technically demanding task. Using focused ion beam/scanning electron microscope microscopy, we recently showed that virtually all synapses can be accurately identified as asymmetric or symmetric synapses when they are visualized, reconstructed, and quantified from large 3D tissue samples obtained in an automated manner. Nevertheless, the analysis, segmentation, and quantification of synapses is still a labor intensive procedure. Thus, novel solutions are currently necessary to deal with the large volume of data that is being generated by automated 3D electron microscopy. Accordingly, we have developed ESPINA, a software tool that performs the automated segmentation and counting of synapses in a reconstructed 3D volume of the cerebral cortex, and that greatly facilitates and accelerates these processes. PMID:21633491

The Health Services Mobility Study Method of Task Analysis and Curriculum Design. Research Report No. 11. Volume 3: Using the Computer to Develop Job Ladders.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

This document is volume 3 of a four-volume report which describes the components of the Health Services Mobility Study (HSMS) method of task analysis, job ladder design, and curriculum development. Divided into four chapters, volume 3 is a manual for using HSMS computer based statistical procedures to design job structures and job ladders. Chapter…

Can virtual reality simulators be a certification tool for bariatric surgeons?

PubMed

Giannotti, Domenico; Patrizi, Gregorio; Casella, Giovanni; Di Rocco, Giorgio; Marchetti, Massimiliano; Frezzotti, Francesca; Bernieri, Maria Giulia; Vestri, Anna Rita; Redler, Adriano

2014-01-01

Construct validity of virtual laparoscopic simulators for basic laparoscopic skills has been proposed; however, it is not yet clear whether the simulators can identify the actual experience of surgeons in more complex procedures such as laparoscopic Roux-en-Y gastric bypass. This study tested the ability of the Lap Mentor simulator to recognize the experience in advanced laparoscopic procedures and to assess its role in the certification of bariatric surgeons. Twenty surgeons were divided into two groups according to their experience in laparoscopic and bariatric surgery. The general group included 10 general surgeons performing between 75 and 100 nonbariatric laparoscopic procedures. The bariatric group included 10 bariatric surgeons performing between 50 and 100 laparoscopic bariatric procedures. Participants were tested on the simulator in one basic task (task 1: eye-hand coordination) and in two tasks of the gastric bypass module (task 2: creation of the gastric pouch; task 3: gastrojejunal anastomosis). Comparing the groups, no significant differences were found in task 1. Analyzing the results from the gastric bypass module (bariatric vs. general), in task 2, significant differences (p < 0.05) were found in the median volume of the gastric pouch (21 vs. 48 cm(3)), in the percentage of fundus included in the pouch (8.4 vs. 29.4 %), in the complete dissection at the angle of His (10 vs. 3), and in safety parameters. In task 3, significant differences were found in the size and position of enterotomies. The Lap Mentor may be proposed as a certification tool for bariatric surgeons because it also recognizes their specific skills in the technical details of the procedure that affect long-term results. Furthermore, the possibility of analyzing the performance in detail can help define areas where the surgeon is lacking. These findings indicate a potential role of the Lap Mentor in tailoring the training to maximize improvement.

Conservation of species, volume, and belief in patients with Alzheimer's disease: the issue of domain specificity and conceptual impairment.

PubMed

Zaitchik, Deborah; Solomon, Gregg E A

2009-09-01

Two studies investigated whether patients with Alzheimer's disease (AD) suffer high-level and category-specific impairment in the conceptual domain of living things. In Experiment 1, AD patients and healthy young and healthy elderly controls took part in three tasks: the conservation of species, volume, and belief. All 3 tasks required tracking an object's identity in the face of irrelevant but salient transformations. Healthy young and elderly controls performed at or near ceiling on all tasks. AD patients were at or near ceiling on the volume and belief tasks, but only about half succeeded on the species task. Experiment 2 demonstrated that the results were not due to simple task demands. AD patients' failure to conserve species indicates that they are impaired in their theoretical understanding of living things, and their success on the volume and belief tasks suggests that the impairment is domain-specific. Two hypotheses are put forward to explain the phenomenon: The first, a category-specific account, holds that the intuitive theory of biology undergoes pervasive degradation; the second, a hybrid domain-general/domain-specific account, holds that impairment to domain-general processes such as executive function interacts with core cognition, the primitive elements that are the foundation of domain-specific knowledge.

Conservation of species, volume, and belief in patients with Alzheimer’s disease: the issue of domain-specificity and conceptual impairment

PubMed Central

Zaitchik, Deborah; Solomon, Gregg E. A.

2009-01-01

Two studies investigated whether patients with Alzheimer’s disease (AD) suffer high-level and category-specific impairment in the conceptual domain of living things. In Study 1, AD patients and healthy young and healthy elderly controls took part in three tasks: the Conservation of Species, Volume, and Belief. All 3 tasks required tracking an object’s identity in the face of irrelevant but salient transformations. Healthy young and elderly controls performed at or near ceiling on all tasks. AD patients were at or near ceiling on the Volume and Belief tasks, but only about half succeeded on the Species task. Study 2 demonstrated that the results were not due to simple task demands. AD patients’ failure to conserve species indicates that they are impaired in their theoretical understanding of living things, and their success on the Volume and Belief tasks suggests that the impairment is domain-specific. Two hypotheses are put forward to explain the phenomenon: the first, a category-specific account, holds that the intuitive theory of biology undergoes pervasive degradation; the second, a hybrid domain-general/domain-specific account, holds that impairment to domain-general processes such as executive function interacts with core cognition, the primitive elements that are the foundation of domain-specific knowledge. PMID:20043252

Teaching Technical Writing: Focusing on Process.

ERIC Educational Resources Information Center

Santelmann, Patricia Kelly

In preparing students for business writing, a technical writing class should foster (1) a sensitivity to audience and an understanding of the business or technical organizational audience, (2) analytical problem solving that precedes any but the simplest writing task, (3) understanding of the patterns of organization that make information clear to…

Moving International Technical Communication Forward: A World Englishes Approach

ERIC Educational Resources Information Center

Bokor, Michael Jarvis Kwadzo

2011-01-01

This article explores how the English language contributes to cross-boundary communication failure and establishes that there is an "English language problem" that has not been adequately addressed in preparing United States native English-speaking students for international technical communication tasks. For example, U.S. technical communication…

Technical Writing Tips

ERIC Educational Resources Information Center

Kennedy, Patrick M.

2004-01-01

The main reason engineers, technicians, and programmers write poor technical documents is because they have had little training or experience in that area. This article addresses some of the basics that students can use to master technical writing tasks. The article covers the most common problems writers make and offers suggestions for improving…

A Taxonomy of Technical Assistance Skills.

ERIC Educational Resources Information Center

Ogden, Evelyn; Musumeci, Marilyn

To operationalize the Technical Assistance Brokerage System, the first major task called for the development of a taxonomy of training and technical assistance services specifying requisite skills and skill clusters by the dimensions of client type, stages of dissemination, and levels of experience. From a literature search approximately 400…

Looking Back, Moving Forward: Technical, Normative, and Political Dimensions of School Discipline

ERIC Educational Resources Information Center

Wiley, Kathryn E.; Anyon, Yolanda; Yang, Jessica L.; Pauline, Malina E.; Rosch, Alyssa; Valladares, Giovana; Downing, Barbara J.; Pisciotta, Lisa

2018-01-01

Purpose: School discipline reformers have presumed that such work is largely a technical task, emphasizing discrete changes to discipline policies and protocols. Yet prior theory and research suggest that emphasizing technical changes may overlook additional and important aspects of reform, namely, the normative and political dimensions within…

Suborbital Safety Technical Committee- Summary of Proposed Standards & Guidelines

NASA Astrophysics Data System (ADS)

Quinn, Andy; Atencia Yepez, Amaya; Klicker, Michael; Howard, Diane; Verstraeten, Joram; Other Suborbital Safety TC Members

2013-09-01

There are currently no international safety standards and guidelines to assist designers, operators and authorities in the suborbital domain. There is a launch licensing regime in the United States (US) to assist the forerunners of the suborbital domain however this does not provide a safety approval for the vehicle against set standards or does not have an acceptable level of safety to achieve in terms of design or operation. In Europe a certification framework may be implemented however this (or any regulatory framework) is not in place as yet. This paper summarises the 5 tasks thus far completed by the International Association for the Advancement of Space Safety (IAASS) Suborbital Safety Technical Committee (SS TC) in terms of deriving standards and guidelines for the suborbital domain. The SS TC comprises members from the suborbital industry (US and European vehicle designers), safety experts, legal experts, medical/training experts, prospective spaceport operators and members from the US and European authorities (though these members cannot directly steer the standards and guidelines - they can merely review them for interest and comment on non-policy aspects). The SS TC has been divided into three working groups (WG): Regulatory WG, Technical WG and Operations WG. The 5 tasks that are summarised in this paper include: Regulatory WG - (Task 1) Clarify and promote regulatory framework for suborbital flights (including discussions on Space Law 'v' Air Law for suborbital domain); Technical WG - (Task 1) Defining & Alignment (globally) of Safety Criteria for Suborbital domain using industry best practices, (Task 2) Software/complex hardware certification for suborbital flights; Operations WG - (Task 1) Flight Crew and Spaceflight Participant Medical and Training Standards & Guidelines for suborbital flight, (Task 2) Spaceport Safety Management System. This paper also details the next set of standards and guidelines that will be derived by the SS TC. The paper concludes that these and future IAASS suborbital safety standards and guidelines are needed now and should beconsidered by the industry players before the first commercial flights expected late 2013/early 2014.

Regional gray matter volume in the posterior precuneus is associated with general self-efficacy.

PubMed

Sugiura, Ayaka; Aoki, Ryuta; Murayama, Kou; Yomogida, Yukihito; Haji, Tomoki; Saito, Atsuko; Hasegawa, Toshikazu; Matsumoto, Kenji

2016-12-14

Motivation in doing a task is influenced not only by the expected outcome of the task but also by the belief that one has in successfully executing the task. Over time, individuals accumulate experiences that contribute toward a general belief in one's overall ability to successfully perform tasks, which is called general self-efficacy (GSE). We investigated the relationship between regional gray matter volume and individual differences in GSE. Brain anatomy was analyzed using magnetic resonance images obtained from 64 healthy right-handed participants who had completed Sherer's GSE scale. After controlling for other factors related to motivation, age, sex, and total gray matter volume of each participant, results showed that regional gray matter volume in the posterior part of the precuneus significantly and positively correlated with the GSE score. These results suggest that one's accumulated experiences of success and failure, which contribute toward GSE, also influence the anatomical characteristics of the precuneus.

Links between Success in Non-Measurement and Calculation Tasks in Area and Volume Measurement and Pupils' Problems

ERIC Educational Resources Information Center

Tumová, Veronika; Vondrová, Nada

2017-01-01

Measurement in geometry is one of the key areas of school mathematics, however, pupils make serious mistakes when solving problems involving measurement and hold misconceptions. This article focuses on the possible links between lower secondary pupils' (n = 870) success in solving non-measurement tasks and calculations tasks on area and volume and…

SeaWiFS Technical Report Series. Volume 24: SeaWiFS Technical Report Series Cumulative Index, Volumes 1-23

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1995-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS is expected to be launched in 1995, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 23 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index will include all of the information contained in the preceding indices.

SeaWiFS technical report series. Volume 24: SeaWiFS technical report series cumulative index, volumes 1-23

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

1995-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS is expected to be launched in 1995, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 23 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index will include all of the information contained in the preceeding indices.

SeaWiFS technical report series. Volume 18: SeaWiFS technical report series cumulative index: Volumes 1-17

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1995-01-01

The Sea-viewing Wide field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS) which ceased operations in 1986 after an eight-year mission. SeaWiFS is expected to be launched in 1995 on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC), has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 17 volumes and consists of 6 sections including: an errata, an addendum (summaries of various SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops, and other auxiliary information), an index to key words and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editor's intention to publish a cumulative index of this type after every five volumes in the series. Each index covers the topics published in all previous editions, that is, each new index includes all of the information contained in the preceding indices.

SeaWiFS technical report series. Volume 12, SeaWiFS technical report series cumulative index: Volumes 1-11

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

1993-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an 8-year mission. SeaWiFS is expected to be launched in 1994, on the SeaStar satellite, being built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration's (NASA) Goddard Space Flight Center (GSFC) has undertaken the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566. All reports published are volumes within the series. This particular volume serves as a reference, or guidebook, to the previous 11 volumes and consists of 6 sections including: an errata, an addendum (a summary of the SeaWiFS Working Group Bio-optical Algorithm and Protocols Subgroups Workshops), an index to keywords and phrases, a list of all references cited, and lists of acronyms and symbols used. It is the editors' intention to publish a cumulative index of this type after every five volumes in the series. This will cover the topics published in all previous editions of the indices, that is, each new index will include all of the information contained in the preceding indices.

Surgical volume-to-outcome relationship and monitoring of technical performance in pediatric cardiac surgery.

PubMed

Kalfa, David; Chai, Paul; Bacha, Emile

2014-08-01

A significant inverse relationship of surgical institutional and surgeon volumes to outcome has been demonstrated in many high-stakes surgical specialties. By and large, the same results were found in pediatric cardiac surgery, for which a more thorough analysis has shown that this relationship depends on case complexity and type of surgical procedures. Lower-volume programs tend to underperform larger-volume programs as case complexity increases. High-volume pediatric cardiac surgeons also tend to have better results than low-volume surgeons, especially at the more complex end of the surgery spectrum (e.g., the Norwood procedure). Nevertheless, this trend for lower mortality rates at larger centers is not universal. All larger programs do not perform better than all smaller programs. Moreover, surgical volume seems to account for only a small proportion of the overall between-center variation in outcome. Intraoperative technical performance is one of the most important parts, if not the most important part, of the therapeutic process and a critical component of postoperative outcome. Thus, the use of center-specific, risk-adjusted outcome as a tool for quality assessment together with monitoring of technical performance using a specific score may be more reliable than relying on volume alone. However, the relationship between surgical volume and outcome in pediatric cardiac surgery is strong enough that it ought to support adapted and well-balanced health care strategies that take advantage of the positive influence that higher center and surgeon volumes have on outcome.

ETS Matched Pictures Language Comprehension Task I and II; Technical Report 5. Disadvantaged Children and Their First School Experiences. ETS-Head Start Longitudinal Study. Technical Report Series.

ERIC Educational Resources Information Center

Meissner, Judith A.; And Others

The ETS Matched Pictures test was used in the longitudinal study to measure children's comprehension of certain grammatical features, such as past and future tenses, negation and prepositions. The task materials for both I and II consist of a set of cards, with each card having a pair of black and white pictures. Both pictures in a pair contain…

Verification of accurate technical insight: a prerequisite for self-directed surgical training.

PubMed

Hu, Yinin; Kim, Helen; Mahmutovic, Adela; Choi, Joanna; Le, Ivy; Rasmussen, Sara

2015-03-01

Simulation-based surgical skills training during preclinical education is a persistent challenge due to time constraints of trainees and instructors alike. Self-directed practice is resource-efficient and flexible; however, insight into technical proficiency among trainees is often lacking. The purpose of this study is to prospectively assess the accuracy of self-assessments among medical students learning basic surgical suturing. Over seven weekly practice sessions, preclinical medical students performed serial repetitions of a simulation-based suturing task under one-on-one observation by one of four trainers. Following each task repetition, self- and trainer-assessments (SA-TA) were performed using a 36-point weighted checklist of technical standards developed a priori by expert consensus. Upon study completion, agreement between SA and TA was measured using weighted Cohen's kappa coefficients. Twenty-nine medical students each performed a median of 25 suture task repetitions (IQR 21.5-28). Self-assessments tended to overestimate proficiency during the first tertile of practice attempts. Agreement between SA and TA improved with experience, such that the weighted kappa statistics for the two-handed and instrument ties were >0.81 after 18-21 task attempts. Inexperienced trainees frequently overestimate technical proficiency through self-assessments. However, this bias diminishes with repetitive practice. Only after trainees have attained the capacity to accurately self-assess can effective self-directed learning take place.

SeaWiFS Postlaunch Technical Report Series. Volume 6; Cumulative Index: Volumes 1-5

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B. (Editor)

2000-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS was launched on 1 August 1997, on the OrbView-2 satellite, built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) undertook the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. The start of this documentation was titled the SeaWiFS Technical Report Series, which ended after 43 volumes were published. A follow-on series was started, titled the SeaWiFS Postlaunch Technical Report Series. This particular volume serves as a reference, or guidebook, to the previous five volumes and consists of four sections including an errata, an index to key words and phrases, a list of acronyms used, and a list of all references cited. The editors will publish a cumulative index of this type after every five volumes.

Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-03-01

This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

The Marshall Engineering Thermosphere (MET) Model. Volume 1; Technical Description

NASA Technical Reports Server (NTRS)

Smith, R. E.

1998-01-01

Volume 1 presents a technical description of the Marshall Engineering Thermosphere (MET) model atmosphere and a summary of its historical development. Various programs developed to augment the original capability of the model are discussed in detail. The report also describes each of the individual subroutines developed to enhance the model. Computer codes for these subroutines are contained in four appendices.

Science and Engineering Technical Assessments (SETA) Program

NASA Technical Reports Server (NTRS)

Huy, Frank

2000-01-01

This document provides a project plan for the D.N. American response to Modification #1 to Contract Task Order #13 - Program Maintenance and Logistics for the Science and Engineering Technical Assessments (SETA) contract.

Goddard Geophysical and Astronomical Observatory

NASA Technical Reports Server (NTRS)

Covey, Rawland; Kodak, Charles

1999-01-01

This report summarizes the technical parameters and the technical staff of the VLBI system at GGAO. It also gives an overview of VLBI activities during the previous year. The outlook lists the tasks planned for 1999.

Technical Assistance to Developers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.

2012-07-17

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols,more » and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.« less

7 CFR 1709.117 - Application requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... project including target community, goals, tasks to be completed and other relevant information that... to support a finding of technical feasibility; (ii) Identify the major tasks to be performed and a proposed timeline for completion of each task; and (iii) Identify the location of the project target area...

Western Tier Trichloroethylene Investigation Technical Plan. Version 3. 1

DTIC Science & Technology

1987-10-01

07p-o018.4 - 7’i.j -s 7,ze Ns vý-c~~f 0MB to.0 o,*%18 .. ý’ *. 4 -, I **5 1 "a! *- " -- .e..~’-!:c -~~ ’%as-ý9Ct, :C I. AUEENCY JSE ONLY .. eve DiarK...OBJECTIVES OF TASK 38 ARE TO: 1 . DETERMINE THE SOURCE(S) OF TRCLE IN THE WESTERN TIER 2. FOR EACH SOURCE, DEFINE THE CONTAMINANT PLUME 3. ESTIMATE THE...e. I TASK 38 TECHNICAL PLAN I TABLE OF CONTENTS i Sectio PA 1.0 INTRODUCTION 1 - 1 1 1.1 Background 1 - 1 1.2 Technical ADproach 1 -2 1.3 Areas to be

Task-specific feature extraction and classification of fMRI volumes using a deep neural network initialized with a deep belief network: Evaluation using sensorimotor tasks

PubMed Central

Jang, Hojin; Plis, Sergey M.; Calhoun, Vince D.; Lee, Jong-Hwan

2016-01-01

Feedforward deep neural networks (DNN), artificial neural networks with multiple hidden layers, have recently demonstrated a record-breaking performance in multiple areas of applications in computer vision and speech processing. Following the success, DNNs have been applied to neuroimaging modalities including functional/structural magnetic resonance imaging (MRI) and positron-emission tomography data. However, no study has explicitly applied DNNs to 3D whole-brain fMRI volumes and thereby extracted hidden volumetric representations of fMRI that are discriminative for a task performed as the fMRI volume was acquired. Our study applied fully connected feedforward DNN to fMRI volumes collected in four sensorimotor tasks (i.e., left-hand clenching, right-hand clenching, auditory attention, and visual stimulus) undertaken by 12 healthy participants. Using a leave-one-subject-out cross-validation scheme, a restricted Boltzmann machine-based deep belief network was pretrained and used to initialize weights of the DNN. The pretrained DNN was fine-tuned while systematically controlling weight-sparsity levels across hidden layers. Optimal weight-sparsity levels were determined from a minimum validation error rate of fMRI volume classification. Minimum error rates (mean ± standard deviation; %) of 6.9 (± 3.8) were obtained from the three-layer DNN with the sparsest condition of weights across the three hidden layers. These error rates were even lower than the error rates from the single-layer network (9.4 ± 4.6) and the two-layer network (7.4 ± 4.1). The estimated DNN weights showed spatial patterns that are remarkably task-specific, particularly in the higher layers. The output values of the third hidden layer represented distinct patterns/codes of the 3D whole-brain fMRI volume and encoded the information of the tasks as evaluated from representational similarity analysis. Our reported findings show the ability of the DNN to classify a single fMRI volume based on the extraction of hidden representations of fMRI volumes associated with tasks across multiple hidden layers. Our study may be beneficial to the automatic classification/diagnosis of neuropsychiatric and neurological diseases and prediction of disease severity and recovery in (pre-) clinical settings using fMRI volumes without requiring an estimation of activation patterns or ad hoc statistical evaluation. PMID:27079534

Task-specific feature extraction and classification of fMRI volumes using a deep neural network initialized with a deep belief network: Evaluation using sensorimotor tasks.

PubMed

Jang, Hojin; Plis, Sergey M; Calhoun, Vince D; Lee, Jong-Hwan

2017-01-15

Feedforward deep neural networks (DNNs), artificial neural networks with multiple hidden layers, have recently demonstrated a record-breaking performance in multiple areas of applications in computer vision and speech processing. Following the success, DNNs have been applied to neuroimaging modalities including functional/structural magnetic resonance imaging (MRI) and positron-emission tomography data. However, no study has explicitly applied DNNs to 3D whole-brain fMRI volumes and thereby extracted hidden volumetric representations of fMRI that are discriminative for a task performed as the fMRI volume was acquired. Our study applied fully connected feedforward DNN to fMRI volumes collected in four sensorimotor tasks (i.e., left-hand clenching, right-hand clenching, auditory attention, and visual stimulus) undertaken by 12 healthy participants. Using a leave-one-subject-out cross-validation scheme, a restricted Boltzmann machine-based deep belief network was pretrained and used to initialize weights of the DNN. The pretrained DNN was fine-tuned while systematically controlling weight-sparsity levels across hidden layers. Optimal weight-sparsity levels were determined from a minimum validation error rate of fMRI volume classification. Minimum error rates (mean±standard deviation; %) of 6.9 (±3.8) were obtained from the three-layer DNN with the sparsest condition of weights across the three hidden layers. These error rates were even lower than the error rates from the single-layer network (9.4±4.6) and the two-layer network (7.4±4.1). The estimated DNN weights showed spatial patterns that are remarkably task-specific, particularly in the higher layers. The output values of the third hidden layer represented distinct patterns/codes of the 3D whole-brain fMRI volume and encoded the information of the tasks as evaluated from representational similarity analysis. Our reported findings show the ability of the DNN to classify a single fMRI volume based on the extraction of hidden representations of fMRI volumes associated with tasks across multiple hidden layers. Our study may be beneficial to the automatic classification/diagnosis of neuropsychiatric and neurological diseases and prediction of disease severity and recovery in (pre-) clinical settings using fMRI volumes without requiring an estimation of activation patterns or ad hoc statistical evaluation. Copyright © 2016 Elsevier Inc. All rights reserved.

SeaWiFS Technical Report Series. Volume 43; SeaWiFS Prelaunch Technical Report Series Final Cumulative Index

NASA Technical Reports Server (NTRS)

Firestone, Elaine R. (Editor); Hooker, Stanford B.

1998-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS was launched on 1 August 1997, on the SeaStar satellite, built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), undertook the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. This documentation, entitled the SeaWiFS Technical Report Series, is in the form of NASA Technical Memorandum Number 104566 and 1998-104566. All reports published are volumes within the series. This particular volume, which is the last of the so-called Prelaunch Series serves as a reference, or guidebook, to the previous 42 volumes and consists of 6 sections including: an addenda, an errata, an index to key words and phrases, lists of acronyms and symbols used, and a list of all references cited. The editors have published a cumulative index of this type after every five volumes. Each index covers the reference topics published in all previous editions, that is, each new index includes all of the information contained in the preceding indexes with the exception of any addenda.

How to develop and write a case for technical writing

NASA Technical Reports Server (NTRS)

Couture, B.; Goldstein, J.

1981-01-01

Case of different sizes and shapes for teaching technical writing to engineers at Wayne State University have been developed. The case approach was adopted for some assignments because sophomores and juniors lacked technical expertise and professional knowledge of the engineering world. Cases were found to be good exercises, providing realistic practice in specific writing tasks or isolating particular skills in the composing process. A special kind of case which narrates the experiences of one technical person engaged in the problem-solving process in a professional rhetorical situation was developed. This type of long, realistic fiction is called a an "holistic" case. Rather than asking students to role-play a character, an holistic case realistically encompasses the whole of the technical writing process. It allows students to experience the total communication act in which the technical task and data are fully integrated into the rhetorical situation and gives an opportunity to perform in a realistic context, using skills and knowledge required in communication on the job. It is believed that the holistic case most fully exploits the advantages of the case method for students of professional communication.

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-12-08

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burnmore » internal combustion engine. This technical progress report covers work performed by Delphi from January 1, 2003 to June 30, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; and Task 9 Stack Testing with Coal-Based Reformate.« less

Savannah River Site Approved Site Treatment Plan, 2001 Annual Update (Volumes I and II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lawrence, B.

2001-04-30

The Compliance Plan Volume (Volume I) identifies project activity scheduled milestones for achieving compliance with Land Disposal Restrictions. Information regarding the technical evaluation of treatment options for SRS mixed wastes is contained in the Background Volume (Volume II) and is provided for information.

Megan Day | NREL

Science.gov Websites

research, analysis, and technical assistance on municipal energy planning and policy, utility-scale Baseline Analysis of Municipal Codification across the U.S., NREL Technical Report (2016) Navajo Generating Station & Federal Resource Planning - Volume 1: Sectoral, Technical, and Economic Trends, NREL

District heating and cooling systems for communities through power plant retrofit distribution network. Volume 3. Final report, September 1, 1978-May 31, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This final report of Phase I of the study presents Task 4, Technical Review and Assessment. The most-promising district-heating concept identified in the Phase I study for the Public Service Electric and Gas Company, Newark, New Jersey, is a hot-water system in which steam is extracted from an existing turbine and used to drive a new, small backpressure turbine-generator. The backpressure turbine provides heat for district heating and simultaneously provides additional electric-generating capacity to partially offset the capacity lost due to the steam extraction. This approach is the most-economical way to retrofit the stations studied for district heating while minimizingmore » electric-capacity loss. Nine fossil-fuel-fired stations within the PSE and G system were evaluated for possibly supplying heat for district heating and cooling in cogeneration operations, but only three were selected to supply the district-heating steam. They are Essex, Hudson, and Bergen. Plant retrofit, thermal distribution schemes, consumer-conversion scheme, and consumer-metering system are discussed. Extensive technical information is provided in 16 appendices, additional tables, figures, and drawings. (MCW)« less

Dual Tasking and Working Memory in Alcoholism: Relation to Frontocerebellar Circuitry

PubMed Central

Chanraud, Sandra; Pitel, Anne-Lise; Rohlfing, Torsten; Pfefferbaum, Adolf; Sullivan, Edith V

2010-01-01

Controversy exists regarding the role of cerebellar systems in cognition and whether working memory compromise commonly marking alcoholism can be explained by compromise of nodes of corticocerebellar circuitry. We tested 17 alcoholics and 31 age-matched controls with dual-task, working memory paradigms. Interference tasks competed with verbal and spatial working memory tasks using low (three item) or high (six item) memory loads. Participants also underwent structural MRI to obtain volumes of nodes of the frontocerebellar system. On the verbal working memory task, both groups performed equally. On the spatial working memory with the high-load task, the alcoholic group was disproportionately more affected by the arithmetic distractor than were controls. In alcoholics, volumes of the left thalamus and left cerebellar Crus I volumes were more robust predictors of performance in the spatial working memory task with the arithmetic distractor than the left frontal superior cortex. In controls, volumes of the right middle frontal gyrus and right cerebellar Crus I were independent predictors over the left cerebellar Crus I, left thalamus, right superior parietal cortex, or left middle frontal gyrus of spatial working memory performance with tracking interference. The brain–behavior correlations suggest that alcoholics and controls relied on the integrity of certain nodes of corticocerebellar systems to perform these verbal and spatial working memory tasks, but that the specific pattern of relationships differed by group. The resulting brain structure–function patterns provide correlational support that components of this corticocerebellar system not typically related to normal performance in dual-task conditions may be available to augment otherwise dampened performance by alcoholics. PMID:20410871

THE APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON SEQUESTRATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2002-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research projects is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Outcomes of an Independent Review and Guidelines for the Implementation of a Program Review Model. Volume II. Technical Report.

ERIC Educational Resources Information Center

Carvell Education Managment Planning, Inc., Los Angeles, CA.

The second part of a report on a comprehensive review of the credit instructional programs offered by Pasadena City College (PCC), this volume contains a technical description of the data collection and assembly procedures used in the program review and provides guidelines for the implementation of the program review model. The first section…

NASA/Army Rotorcraft Technology. Volume 2: Materials and Structures, Propulsion and Drive Systems, Flight Dynamics and Control, and Acoustics

NASA Technical Reports Server (NTRS)

1988-01-01

The Conference Proceedings is a compilation of over 30 technical papers presented which report on the advances in rotorcraft technical knowledge resulting from NASA, Army, and industry research programs over the last 5 to 10 years. Topics addressed in this volume include: materials and structures; propulsion and drive systems; flight dynamics and control; and acoustics.

User's Guide to Computing High School Graduation Rates. Volume 2. Technical Report: Technical Evaluation of Proxy Graduation Indicators. NCES 2006-605

ERIC Educational Resources Information Center

Seastrom, Marilyn M.; Chapman, Chris; Stillwell, Robert; McGrath, Daniel; Peltola, Pia; Dinkes, Rachel; Xu, Zeyu

2006-01-01

This report consists of two volumes, the first takes an in-depth look at the various graduation indicators, with a description of the computational formulas, the data required for each indicator, the assumptions underlying each formula, the strengths and weaknesses of each indicator, and a consideration of the conditions under which each indicator…

Involvement of Technical Reasoning More Than Functional Knowledge in Development of Tool Use in Childhood

PubMed Central

Remigereau, Chrystelle; Roy, Arnaud; Costini, Orianne; Osiurak, François; Jarry, Christophe; Le Gall, Didier

2016-01-01

It is well-known that even toddlers are able to manipulate tools in an appropriate manner according to their physical properties. The ability of children to make novel tools in order to solve problems is, however, surprisingly limited. In adults, mechanical problem solving (MPS) has been proposed to be supported by “technical reasoning skills,” which are thought to be involved in every situation requiring the use of a tool (whether conventional or unusual). The aim of this study was to investigate the typical development of real tool use (RTU) skills and its link with technical reasoning abilities in healthy children. Three experimental tasks were adapted from those used with adults: MPS (three different apparatus), RTU (10 familiar tool-object pairs), and functional knowledge (FK; 10 functional picture matching with familiar tools previously used). The tasks were administered to 85 healthy children divided into six age groups (from 6 to 14 years of age). The results revealed that RTU (p = 0.01) and MPS skills improve with age, even if this improvement differs according to the apparatus for the latter (p < 0.01 for the Hook task and p < 0.05 for the Sloping task). Results also showed that MPS is a better predictor of RTU than FK, with a significant and greater weight (importance weight: 0.65; Estimate ± Standard Error: 0.27 ± 0.08). Ours findings suggest that RTU and technical reasoning develop jointly in children, independently from development of FK. In addition, technical reasoning appears partially operative from the age of six onward, even though the outcome of these skills depends of the context in which they are applied (i.e., the type of apparatus). PMID:27877141

Assessment of undiscovered, technically recoverable oil and gas resources of Armenia, 2014

USGS Publications Warehouse

Klett, Timothy R.; Schenk, Christopher J.; Wandrey, Craig J.; Brownfield, Michael E.; Charpentier, Ronald R.; Tennyson, Marilyn E.; Gautier, Donald L.

2014-01-01

Using a geology-based assessment methodology, the U.S. Geological Survey estimated mean volumes of 1 million barrels of undiscovered, technically recoverable conventional oil and 6 billion cubic feet of undiscovered, technically recoverable conventional natural gas in Armenia.

Development of an information retrieval tool for biomedical patents.

PubMed

Alves, Tiago; Rodrigues, Rúben; Costa, Hugo; Rocha, Miguel

2018-06-01

The volume of biomedical literature has been increasing in the last years. Patent documents have also followed this trend, being important sources of biomedical knowledge, technical details and curated data, which are put together along the granting process. The field of Biomedical text mining (BioTM) has been creating solutions for the problems posed by the unstructured nature of natural language, which makes the search of information a challenging task. Several BioTM techniques can be applied to patents. From those, Information Retrieval (IR) includes processes where relevant data are obtained from collections of documents. In this work, the main goal was to build a patent pipeline addressing IR tasks over patent repositories to make these documents amenable to BioTM tasks. The pipeline was developed within @Note2, an open-source computational framework for BioTM, adding a number of modules to the core libraries, including patent metadata and full text retrieval, PDF to text conversion and optical character recognition. Also, user interfaces were developed for the main operations materialized in a new @Note2 plug-in. The integration of these tools in @Note2 opens opportunities to run BioTM tools over patent texts, including tasks from Information Extraction, such as Named Entity Recognition or Relation Extraction. We demonstrated the pipeline's main functions with a case study, using an available benchmark dataset from BioCreative challenges. Also, we show the use of the plug-in with a user query related to the production of vanillin. This work makes available all the relevant content from patents to the scientific community, decreasing drastically the time required for this task, and provides graphical interfaces to ease the use of these tools. Copyright © 2018 Elsevier B.V. All rights reserved.

GASP- General Aviation Synthesis Program. Volume 1: Main program. Part 1: Theoretical development

NASA Technical Reports Server (NTRS)

Hague, D.

1978-01-01

The General Aviation synthesis program performs tasks generally associated with aircraft preliminary design and allows an analyst the capability of performing parametric studies in a rapid manner. GASP emphasizes small fixed-wing aircraft employing propulsion systems varying froma single piston engine with fixed pitch propeller through twin turboprop/ turbofan powered business or transport type aircraft. The program, which may be operated from a computer terminal in either the batch or interactive graphic mode, is comprised of modules representing the various technical disciplines integrated into a computational flow which ensures that the interacting effects of design variables are continuously accounted for in the aircraft sizing procedure. The model is a useful tool for comparing configurations, assessing aircraft performance and economics, performing tradeoff and sensitivity studies, and assessing the impact of advanced technologies on aircraft performance and economics.

Design integration and noise studies for jet STOL aircraft. Task 7C: Augmentor wing cruise blowing valveless system. Volume 2: Small-scale development testing of augmentor wing critical ducting components

NASA Technical Reports Server (NTRS)

Runnels, J. N.; Gupfa, A.

1973-01-01

Augmentor wing ducting system studies conducted on a valveless system configuration that provides cruise thrust from the augmentor nozzles have shown that most of the duct system pressure loss would occur in the strut-wing duct y-junction and the wing duct-augmentor lobe nozzles. These components were selected for development testing over a range of duct Mach numbers and pressure ratios to provide a technical basis for predicting installed wing thrust loading and for evaluating design wing loading of a particular wing aspect ratios. The flow characteristics of ducting components with relatively high pressure loss coefficients were investigated. The turbulent pressure fluctuations associated with flows at high Mach numbers were analyzed to evaluate potential duct fatigue problems.

Western Shallow Oil Zone, Elk Hills Field, Kern County, California:

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carey, K.B.

1987-09-01

The general Reservoir Study of the Western Shallow Oil Zone was prepared by Evans, Carey and Crozier as Task Assignment 009 with the United States Department of Energy. This study, Appendix II addresses the first Wilhelm Sands and its sub unites and pools. Basic pressure, production and assorted technical data were provided by the US Department of Energy staff at Elk Hills. These data were accepted as furnished with no attempt being made by Evans, Carey and Crozier for independent verification. This study has identified the petrophysical properties and the past productive performance of the reservoir. Primary reserves have beenmore » determined and general means of enhancing future recovery have been suggested. It is hoped that this volume can now additionally serve as a take off point for exploitation engineers to develop specific programs toward the end.« less

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

A survey-based cross-sectional study of doctors’ expectations and experiences of non-technical skills for Out of Hours work

PubMed Central

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-01-01

Objectives The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Design Survey-based cross-sectional study informed by focus groups. Setting Online survey with participants from five large teaching hospitals across the UK. Participants 300 Medical Students and Doctors Outcome measure Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. Results The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey ‘Task Prioritisation’ (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for ‘Communication with Senior Doctors’, ‘Dealing with Clinical Isolation’, ‘Task Prioritisation’ and ‘Communication with Patients’. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Conclusions Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. PMID:25687899

NASA Langley Scientific and Technical Information Output, 1995. Volume 1

NASA Technical Reports Server (NTRS)

Stewart, Susan H. (Compiler); Phillips, Marilou S. (Compiler)

1996-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1995. Included are citations for formal reports, high-numbered conference publications, high-numbered technical memorandums, contractor reports, journal articles and other publications, meeting presentations, technical talks, computer programs, tech briefs, and patents.

Endolymphatic Thoracic Duct Stent-Graft Reconstruction for Chylothorax: Approach, Technical Success, Safety, and Short-term Outcomes.

PubMed

Srinivasa, Rajiv N; Chick, Jeffrey Forris Beecham; Hage, Anthony N; Gemmete, Joseph J; Murrey, Douglas C; Srinivasa, Ravi N

2018-04-01

To report approach, technical success, safety, and short-term outcomes of thoracic duct stent-graft reconstruction for the treatment of chylothorax. Two patients, 1 (50%) male and 1 (50%) female, with mean age of 38 years (range: 16-59 years) underwent endolymphatic thoracic duct stent-graft reconstruction between September 2016 and July 2017. Patients had radiographic left-sided chylothoraces (n = 2) from idiopathic causes (n = 1) and heart transplantation (n = 1). In both (100%) patients, antegrade lymphatic access was used to opacify the thoracic duct after which retrograde access was used for thoracic duct stent-graft placement. Pelvic lymphangiography technical success, antegrade cisterna chyli cannulation technical success, thoracic duct opacification technical success, retrograde thoracic duct access technical success, thoracic duct stent-graft reconstruction technical success, ethiodized oil volume, contrast volume, estimated blood loss, procedure time, fluoroscopy time, radiation dose, clinical success, complications, deaths, and follow-up were recorded. Pelvic lymphangiography, antegrade cisterna chyli cannulation, thoracic duct opacification, retrograde thoracic duct access, and thoracic duct stent-graft reconstruction were technically successful in both (100%) patients. Mean ethiodized oil volume was 8 mL (range: 5-10 mL). Mean contrast volume was 13 mL (range: 5-20 mL). Mean estimated blood loss was 13 mL (range: 10-15 mL). Mean fluoroscopy time was 50.4 min (range: 31.2-69.7 min). Mean dose area product and reference air kerma were 954.4 μGmy 2 (range: 701-1,208 μGmy 2 ) and 83.5 mGy (range: 59-108 mGy), respectively. Chylothorax resolved in both (100%) patients. There were no minor or major complications directly related to the procedure. Thoracic duct stent-graft reconstruction may be a technically successful and safe alternative to thoracic duct embolization, disruption, and surgical ligation for the treatment of chylothorax. Additional studies are warranted. Copyright © 2017 Elsevier Inc. All rights reserved.

Smart roadside initiative gap analysis : trucking technology utilization.

DOT National Transportation Integrated Search

2014-04-01

This technical memorandum synthesizes and summarizes the American Transportation Research Institutes (ATRI) findings for Subtask 2.3 of the Smart Roadside Initiative (SRI) Gap Analysis. As part of this task, ATRI: 1. completed a technical literatu...

FRATIS concept of operations : assess test readiness of FRATIS (task 4).

DOT National Transportation Integrated Search

2012-08-01

This technical memorandum presents a concise assessment of the key technical and nontechnical issues and limitations related to field-testing the Freight Advanced Traveler Information System (FRATIS) Dynamic Mobility Applications (DMA) bundle and its...

78 FR 3921 - Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-17

... Specifications Combustion Engineering Plants.'' Specifically, the proposed change revises various TSs to add a... Technical Details TSTF-426, Revision 5, is applicable to all Combustion Engineering- designed nuclear power...

Can a senior house officer's time be used more effectively?

PubMed

Mitchell, J; Hayhurst, C; Robinson, S M

2004-09-01

To determine the amount of time senior house officers (SHO) spent performing tasks that could be delegated to a technician or administrative assistant and therefore to quantify the expected benefit that could be obtained by employing such physicians' assistants (PA). SHOs working in the emergency department were observed for one week by pre-clinical students who had been trained to code and time each task performed by SHOs. Activity was grouped into four categories (clinical, technical, administrative, and other). Those activities in the technical and administrative categories were those we believed could be performed by a PA. The SHOs worked 430 hours in total, of which only 25 hours were not coded due to lack of an observer. Of the 405 hours observed 86.2% of time was accounted for by the various codes. The process of taking a history and examining patients accounted for an average of 22% of coded time. Writing the patient's notes accounted for an average of 20% of coded time. Discussion with relatives and patients accounted for 4.7% of coded time and performing procedures accounted for 5.2% of coded time. On average across all shifts, 15% of coded time was spent doing either technical or administrative tasks. In this department an average of 15% of coded SHOs working time was spent performing administrative and technical tasks, rising to 17% of coded time during a night shift. This is equivalent to an average time of 78 minutes per 10 hour shift/SHO. Most tasks included in these categories could be performed by PAs thus potentially decreasing patient waiting times, improving risk management, allowing doctors to spend more time with their patients, and possibly improving doctors' training.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery.

PubMed

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005-2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc.

Analysis of occupational accidents: prevention through the use of additional technical safety measures for machinery

PubMed Central

Dźwiarek, Marek; Latała, Agata

2016-01-01

This article presents an analysis of results of 1035 serious and 341 minor accidents recorded by Poland's National Labour Inspectorate (PIP) in 2005–2011, in view of their prevention by means of additional safety measures applied by machinery users. Since the analysis aimed at formulating principles for the application of technical safety measures, the analysed accidents should bear additional attributes: the type of machine operation, technical safety measures and the type of events causing injuries. The analysis proved that the executed tasks and injury-causing events were closely connected and there was a relation between casualty events and technical safety measures. In the case of tasks consisting of manual feeding and collecting materials, the injuries usually occur because of the rotating motion of tools or crushing due to a closing motion. Numerous accidents also happened in the course of supporting actions, like removing pollutants, correcting material position, cleaning, etc. PMID:26652689

Age-related differences in processing visual device and task characteristics when using technical devices.

PubMed

Oehl, M; Sutter, C

2015-05-01

With aging visual feedback becomes increasingly relevant in action control. Consequently, visual device and task characteristics should more and more affect tool use. Focussing on late working age, the present study aims to investigate age-related differences in processing task irrelevant (display size) and task relevant visual information (task difficulty). Young and middle-aged participants (20-35 and 36-64 years of age, respectively) sat in front of a touch screen with differently sized active touch areas (4″ to 12″) and performed pointing tasks with differing task difficulties (1.8-5 bits). Both display size and age affected pointing performance, but the two variables did not interact and aiming duration moderated both effects. Furthermore, task difficulty affected the pointing durations of middle-aged adults moreso than those of young adults. Again, aiming duration accounted for the variance in the data. The onset of an age-related decline in aiming duration can be clearly located in middle adulthood. Thus, the fine psychomotor ability "aiming" is a moderator and predictor for age-related differences in pointing tasks. The results support a user-specific design for small technical devices with touch interfaces. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Engineering and Physics Optimization of Breed and Burn Fast Reactor Systems; NUCLEAR ENERGY RESEARCH INITIATIVE (NERI) QUARTERLY PROGRESS REPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pavel Hejzlar, Peter Yarsky, Mike Driscoll, Dan Wachs, Kevan Weaver, Ken Czerwinski, Mike Pope, James Parry, Theron D. Marshall, Cliff B. Davis, Dustin Crawford, Thomas Hartmann, Pradip Saha; Hejzlar, Pavel; Yarsky, Peter

2005-01-31

This project is organized under four major tasks (each of which has two or more subtasks) with contributions among the three collaborating organizations (MIT, INEEL and ANL-West): Task A: Core Physics and Fuel Cycle; Task B: Core Thermal Hydraulics; Task C: Plant Design; Task D: Fuel Design The lead PI, Michael J. Driscoll, has consolidated and summarized the technical progress submissions provided by the contributing investigators from all sites, under the above principal task headings.

STARLAB UV-optical telescope facility, volume 1

NASA Technical Reports Server (NTRS)

1979-01-01

The STARLAB accomplishments to date include both the feasibility definition and detailed design study efforts on critical subsystems. Topics of discussion for this report include: (1) STARLAB capabilities; (2) scientific programs; (3) STARLAB technical description; (4) STARLAB Phase B studies; and (5) technical conclusions Technical recommendations.

48 CFR 2052.211-71 - Technical progress report.

Code of Federal Regulations, 2010 CFR

2010-10-01

... investigator, the contract period of performance, and the period covered by the report. Each report must include the following for each discrete task/task order: (a) A listing of the efforts completed during the...

Simulation-based ureteroscopy skills training curriculum with integration of technical and non-technical skills: a randomised controlled trial.

PubMed

Brunckhorst, Oliver; Shahid, Shahab; Aydin, Abdullatif; McIlhenny, Craig; Khan, Shahid; Raza, Syed Johar; Sahai, Arun; Brewin, James; Bello, Fernando; Kneebone, Roger; Khan, Muhammad Shamim; Dasgupta, Prokar; Ahmed, Kamran

2015-09-01

Current training modalities within ureteroscopy have been extensively validated and must now be integrated within a comprehensive curriculum. Additionally, non-technical skills often cause surgical error and little research has been conducted to combine this with technical skills teaching. This study therefore aimed to develop and validate a curriculum for semi-rigid ureteroscopy, integrating both technical and non-technical skills teaching within the programme. Delphi methodology was utilised for curriculum development and content validation, with a randomised trial then conducted (n = 32) for curriculum evaluation. The developed curriculum consisted of four modules; initially developing basic technical skills and subsequently integrating non-technical skills teaching. Sixteen participants underwent the simulation-based curriculum and were subsequently assessed, together with the control cohort (n = 16) within a full immersion environment. Both technical (Time to completion, OSATS and a task specific checklist) and non-technical (NOTSS) outcome measures were recorded with parametric and non-parametric analyses used depending on the distribution of our data as evaluated by a Shapiro-Wilk test. Improvements within the intervention cohort demonstrated educational value across all technical and non-technical parameters recorded, including time to completion (p < 0.01), OSATS scores (p < 0.001), task specific checklist scores (p = 0.011) and NOTSS scores (p < 0.001). Content validity, feasibility and acceptability were all demonstrated through curriculum development and post-study questionnaire results. The current developed curriculum demonstrates that integrating both technical and non-technical skills teaching is both educationally valuable and feasible. Additionally, the curriculum offers a validated simulation-based training modality within ureteroscopy and a framework for the development of other simulation-based programmes.

Underground Test Area Subproject Phase I Data Analysis Task. Volume VIII - Risk Assessment Documentation Package

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Volume VIII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the risk assessment documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

Underground Test Area Subproject Phase I Data Analysis Task. Volume VII - Tritium Transport Model Documentation Package

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Volume VII of the documentation for the Phase I Data Analysis Task performed in support of the current Regional Flow Model, Transport Model, and Risk Assessment for the Nevada Test Site Underground Test Area Subproject contains the tritium transport model documentation. Because of the size and complexity of the model area, a considerable quantity of data was collected and analyzed in support of the modeling efforts. The data analysis task was consequently broken into eight subtasks, and descriptions of each subtask's activities are contained in one of the eight volumes that comprise the Phase I Data Analysis Documentation.

A Review of Content and Task Analysis Methodology. Technical Report No. 2.

ERIC Educational Resources Information Center

Gibbons, Andrew S.

A review of the literature related to methods for analyzing content or tasks prior to instructional development is presented. The review classifies methods according to a two-dimensional matrix. The first dimension differentiates phases of analysis, each dealing with content and tasks of a particular scope and each generating certain…

Spatial Visualization ability improves with and without studying Technical Drawing.

PubMed

Contreras, María José; Escrig, Rebeca; Prieto, Gerardo; Elosúa, M Rosa

2018-03-27

The results of several studies suggest that spatial ability can be improved through direct training with tasks similar to those integrated in the tests used to measure the ability. However, there is a greater interest in analyzing the effectiveness of indirect training such as games or of learning subjects that involve spatial processes to a certain extent. Thus, the objective of the present study was to analyze whether the indirect training in Technical Drawing improved the Spatial Visualization ability of Architecture students. For this purpose, a group of students enrolled in Fundamentals of Architecture were administered two tests, a Spatial Visualization task and an Abstract Reasoning task, at the beginning and the end of a semester, after having received training through the subjects "Technical Drawing I: Geometry and Perception" and "Projects I." The results of this group were compared with those of a control group of students enrolled in a Mathematics degree, who were also pre-post evaluated but had not received the training in Technical Drawing. The study showed a significant pre-post improvement in both, Visualization and reasoning. However, this improvement occurred in both groups, thereby concluding that this improvement was not due to indirect training. Furthermore, no significant differences were found between men and women in any of the groups or conditions. These results clarify those of an earlier study where improvement in Visualization after training in Technical Drawing was found but did not include a comparison with a control condition. The control condition has proved to be important in order to consider the limitations of the effect of Technical Drawing on said improvement.

Broad Overview of Energy Efficiency and Renewable Energy Opportunities for Department of Defense Installations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, E.; Antkowiak, M.; Butt, R.

The Strategic Environmental Research and Developmental Program (SERDP)/Environmental Security Technology Certification Program (ESTCP) is the Department of Defense?s (DOD) environmental science and technology program focusing on issues related to environment and energy for the military services. The SERDP/ESTCP Office requested that the National Renewable Energy Laboratory (NREL) provide technical assistance with strategic planning by evaluating the potential for several types of renewable energy technologies at DOD installations. NREL was tasked to provide technical expertise and strategic advice for the feasibility of geothermal resources, waste-to-energy technology, photovoltaics (PV), wind, microgrids, and building system technologies on military installations. This technical report ismore » the deliverable for these tasks.« less

Machine Learning Approaches in Cardiovascular Imaging.

PubMed

Henglin, Mir; Stein, Gillian; Hushcha, Pavel V; Snoek, Jasper; Wiltschko, Alexander B; Cheng, Susan

2017-10-01

Cardiovascular imaging technologies continue to increase in their capacity to capture and store large quantities of data. Modern computational methods, developed in the field of machine learning, offer new approaches to leveraging the growing volume of imaging data available for analyses. Machine learning methods can now address data-related problems ranging from simple analytic queries of existing measurement data to the more complex challenges involved in analyzing raw images. To date, machine learning has been used in 2 broad and highly interconnected areas: automation of tasks that might otherwise be performed by a human and generation of clinically important new knowledge. Most cardiovascular imaging studies have focused on task-oriented problems, but more studies involving algorithms aimed at generating new clinical insights are emerging. Continued expansion in the size and dimensionality of cardiovascular imaging databases is driving strong interest in applying powerful deep learning methods, in particular, to analyze these data. Overall, the most effective approaches will require an investment in the resources needed to appropriately prepare such large data sets for analyses. Notwithstanding current technical and logistical challenges, machine learning and especially deep learning methods have much to offer and will substantially impact the future practice and science of cardiovascular imaging. © 2017 American Heart Association, Inc.

Task Descriptions in Diagnostic Radiology. Research Report No. 7. Volume 3, Machine-Related, Patient Care and Administrative Tasks: What Radiologists, Technologists, Nurses and Physicists Do to Run Things and Look After Patients and Equipment.

ERIC Educational Resources Information Center

Gilpatrick, Eleanor

The third of four volumes in Research Report No. 7 of the Health Services Mobility Study (HSMS), this book contains 149 diagnostic radiologist task descriptions that cover activities in the area of nursing (patient care), film processing, quality assurance, radiation protection, machine maintenance, housekeeping, and administration at the…

AHMCT Intelligent Roadway Information System (IRIS) technical support and testing

DOT National Transportation Integrated Search

2011-12-31

This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

AHMCT Intelligent Roadway Information System (IRIS) technical support and testing.

DOT National Transportation Integrated Search

2011-12-01

This report documents the research project AHMCT IRIS Technical Support and Testing, : performed under contract 65A0275, Task ID 1777. It presents an overview of the Intelligent : Roadway Information System (IRIS), and its design and function. ...

SeaWiFS Postlaunch Technical Report Series Cumulative Index: Volumes 1-23

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

2003-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS was launched on 1 August 1997, onboard the OrbView-2 satellite, built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), undertook the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. The start of this documentation was titled the SeaWiFS Technical Report Series, which ended after 43 volumes were published. A follow-on series was started, titled the Sea WiFS Postlaunch Technical Report Series. This particular volume of the so-called Postlaunch Series serves as a reference, or guidebook, to the previous 23 volumes and consists of 4 sections including an errata, an index to key words and phrases, a list of acronyms used, and a list of all references cited. The editors will publish a cumulative index of this type after every five volumes.

An English Language Curriculum for Technical Students. Practical Papers in English Education, Volume 2.

ERIC Educational Resources Information Center

Hutchinson, Tom; And Others

This curriculum for technical students aims at linking the identity of the learner, his initial linguistic and technical competence, and his expectations with the competence expected of him on entering the technical college. The materials of the curriculum make use of a wide variety of information and data sources such as school-level science…

A Study of Job Demands and Curriculum Development in Agricultural Training Related to the Muskegon County Wastewater Management System. Final Report. Volume II. Task Analysis Results.

ERIC Educational Resources Information Center

Fisher, Harold S.; And Others

This is the second volume of a four-volume report of a research project designed to (1) identify job needs for agricultural occupations which will result from the Muskegon County Wastewater Management System and perform a task analysis on each occupation, (2) develop instructional modules and determine their place in either high school or 2-year…

Simulation For Task Practice in Technical Training.

ERIC Educational Resources Information Center

Mallory, W. J.

1981-01-01

Describes two programs used by the Ford Motor Company to train manufacturing skilled trades personnel. Programmable Controller Maintenance Training Program for Industrial Technicians and Troubleshooting Strategy Program use simulation and provide improved task performance after training. (JOW)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ogden, J.M.; Steinbugler, M.; Dennis, E.

For several years, researchers at Princeton University`s Center for Energy and Environmental Studies have carried out technical and economic assessments of hydrogen energy systems. Initially, we focussed on the long term potential of renewable hydrogen. More recently we have explored how a transition to renewable hydrogen might begin. The goal of our current work is to identify promising strategies leading from near term hydrogen markets and technologies toward eventual large scale use of renewable hydrogen as an energy carrier. Our approach has been to assess the entire hydrogen energy system from production through end-use considering technical performance, economics, infrastructure andmore » environmental issues. This work is part of the systems analysis activity of the DOE Hydrogen Program. In this paper we first summarize the results of three tasks which were completed during the past year under NREL Contract No. XR-11265-2: in Task 1, we carried out assessments of near term options for supplying hydrogen transportation fuel from natural gas; in Task 2, we assessed the feasibility of using the existing natural gas system with hydrogen and hydrogen blends; and in Task 3, we carried out a study of PEM fuel cells for residential cogeneration applications, a market which might have less stringent cost requirements than transportation. We then give preliminary results for two other tasks which are ongoing under DOE Contract No. DE-FG04-94AL85803: In Task 1 we are assessing the technical options for low cost small scale production of hydrogen from natural gas, considering (a) steam reforming, (b) partial oxidation and (c) autothermal reforming, and in Task 2 we are assessing potential markets for hydrogen in Southern California.« less

Documentation of the GLAS fourth order general circulation model. Volume 1: Model documentation

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, J.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

The volume 1, of a 3 volume technical memoranda which contains a documentation of the GLAS Fourth Order General Circulation Model is presented. Volume 1 contains the documentation, description of the stratospheric/tropospheric extension, user's guide, climatological boundary data, and some climate simulation studies.

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

PubMed

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Neural and vascular variability and the fMRI-BOLD response in normal aging

PubMed Central

Kannurpatti, Sridhar S.; Motes, Michael A.; Rypma, Bart; Biswal, Bharat B.

2010-01-01

Neural, vascular and structural variables contributing to the BOLD signal response variability were investigated in younger and older humans. Twelve younger healthy human subjects (6M and 6F; mean age: 24 years; range: 19–27 years) and twelve older healthy subjects (5M and 7F; mean age: 58 years; range: 55–71 years) with no history of head trauma and neurological disease were scanned. FMRI measurements using the BOLD contrast were made when participants performed a motor, cognitive or a breath hold task. Activation volume and the BOLD response amplitude were estimated for the younger and older at both group and subject levels. Mean activation volume was reduced by 45, 40 and 38% in the elderly group during the motor, cognitive and breath hold tasks respectively compared to the younger. Reduction in activation volume was substantially higher compared to the reduction in the gray matter volume of 14% in the older compared to the younger. A significantly larger variability in the inter-subject BOLD signal change occurred during the motor task, compared to the cognitive task. BH-induced BOLD signal change between subjects was significantly less-variable in the motor task-activated areas in the younger compared to older whereas such a difference between age groups was not observed during the cognitive task. Hemodynamic scaling using the BH signal substantially reduced the BOLD signal variability during the motor task compared to the cognitive task. The results indicate that the origin of the BOLD signal variability between subjects was predominantly vascular during the motor task while being principally a consequence of neural variability during the cognitive task. Thus, in addition to gray matter differences, the type of task performed can have different vascular variability weighting that can influence age-related differences in brain functional response. PMID:20117893

Neural and vascular variability and the fMRI-BOLD response in normal aging.

PubMed

Kannurpatti, Sridhar S; Motes, Michael A; Rypma, Bart; Biswal, Bharat B

2010-05-01

Neural, vascular and structural variables contributing to the blood oxygen level-dependent (BOLD) signal response variability were investigated in younger and older humans. Twelve younger healthy human subjects (six male and six female; mean age: 24 years; range: 19-27 years) and 12 older healthy subjects (five male and seven female; mean age: 58 years; range: 55-71 years) with no history of head trauma and neurological disease were scanned. Functional magnetic resonance imaging measurements using the BOLD contrast were made when participants performed a motor, cognitive or a breath hold (BH) task. Activation volume and the BOLD response amplitude were estimated for the younger and older at both group and subject levels. Mean activation volume was reduced by 45%, 40% and 38% in the elderly group during the motor, cognitive and BH tasks, respectively, compared to the younger. Reduction in activation volume was substantially higher compared to the reduction in the gray matter volume of 14% in the older compared to the younger. A significantly larger variability in the intersubject BOLD signal change occurred during the motor task, compared to the cognitive task. BH-induced BOLD signal change between subjects was significantly less-variable in the motor task-activated areas in the younger compared to older whereas such a difference between age groups was not observed during the cognitive task. Hemodynamic scaling using the BH signal substantially reduced the BOLD signal variability during the motor task compared to the cognitive task. The results indicate that the origin of the BOLD signal variability between subjects was predominantly vascular during the motor task while being principally a consequence of neural variability during the cognitive task. Thus, in addition to gray matter differences, the type of task performed can have different vascular variability weighting that can influence age-related differences in brain functional response. 2010 Elsevier Inc. All rights reserved.

Automation Applications in an Advance Air Traffic Management System : Volume IIB : Functional Analysis of Air Traffic Management (Cont'd)

DOT National Transportation Integrated Search

1974-08-01

Volume 2 contains the analysis and description of air traffic management activities at three levels of detail - functions, subfunctions, and tasks. A total of 265 tasks are identified and described, and the flow of information inputs and outputs amon...

REACH. Teacher's Guide, Volume III. Task Analysis.

ERIC Educational Resources Information Center

Morris, James Lee; And Others

Designed for use with individualized instructional units (CE 026 345-347, CE 026 349-351) in the electromechanical cluster, this third volume of the postsecondary teacher's guide presents the task analysis which was used in the development of the REACH (Refrigeration, Electro-Mechanical, Air Conditioning, Heating) curriculum. The major blocks of…

Automated Applications in an Advanced Air Traffic Management System : Volume 2B. Functional Analysis of Air Traffic Management (Cont'd.)

DOT National Transportation Integrated Search

1974-08-01

Volume 2 contains the analysis and description of air traffic management activities at three levels of detail - functions, subfunctions, and tasks. A total of 265 tasks are identified and described, and the flow of information inputs and outputs amon...

Automation Applications in an Advanced Air Traffic Management System : Volume 2A. Functional Analysis of Air Traffic Management.

DOT National Transportation Integrated Search

1974-08-01

Volume 2 contains the analysis and description of air traffic management activities at three levels of detail - functions, subfunctions, and tasks. A total of 265 tasks are identified and described, and the flow of information inputs and outputs amon...

Automation Applications in an Advanced Air Traffic Management System : Volume 2C. Functional Analysis of Air Traffic Management (Cont.'d)

DOT National Transportation Integrated Search

1974-08-01

Volume 2 contains the analysis and description of air traffic management activities at three levels of detail - functions, subfunctions, and tasks. A total of 265 tasks are identified and described, and the flow of information inputs and outputs amon...

Psychomotor performance measured in a virtual environment correlates with technical skills in the operating room.

PubMed

Kundhal, Pavi S; Grantcharov, Teodor P

2009-03-01

This study was conducted to validate the role of virtual reality computer simulation as an objective method for assessing laparoscopic technical skills. The authors aimed to investigate whether performance in the operating room, assessed using a modified Objective Structured Assessment of Technical Skill (OSATS), correlated with the performance parameters registered by a virtual reality laparoscopic trainer (LapSim). The study enrolled 10 surgical residents (3 females) with a median of 5.5 years (range, 2-6 years) since graduation who had similar limited experience in laparoscopic surgery (median, 5; range, 1-16 laparoscopic cholecystectomies). All the participants performed three repetitions of seven basic skills tasks on the LapSim laparoscopic trainer and one laparoscopic cholecystectomy in the operating room. The operating room procedure was video recorded and blindly assessed by two independent observers using a modified OSATS rating scale. Assessment in the operating room was based on three parameters: time used, error score, and economy of motion score. During the tasks on the LapSim, time, error (tissue damage and millimeters of tissue damage [tasks 2-6], error score [incomplete target areas, badly placed clips, and dropped clips [task 7]), and economy of movement parameters (path length and angular path) were registered. The correlation between time, economy, and error parameters during the simulated tasks and the operating room procedure was statistically assessed using Spearman's test. Significant correlations were demonstrated between the time used to complete the operating room procedure and time used for task 7 (r (s) = 0.74; p = 0.015). The error score demonstrated during the laparoscopic cholecystectomy correlated well with the tissue damage in three of the seven tasks (p < 0.05), the millimeters of tissue damage during two of the tasks, and the error score in task 7 (r (s) = 0.67; p = 0.034). Furthermore, statistically significant correlations were observed between the economy of motion score from the operative procedure and LapSim's economy parameters (path length and angular path in six of the tasks) (p < 0.05). The current study demonstrated significant correlations between operative performance in the operating room (assessed using a well-validated rating scale) and psychomotor performance in virtual environment assessed by a computer simulator. This provides strong evidence for the validity of the simulator system as an objective tool for assessing laparoscopic skills. Virtual reality simulation can be used in practice to assess technical skills relevant for minimally invasive surgery.

One of the criteria for selecting a contractor for high-rise construction

NASA Astrophysics Data System (ADS)

Tuskaeva, Zalina; Tagirov, Timur

2018-03-01

The mechanisms for management of the building complex used and proposed to date do not always provide the required result in the assessment of the construction organization facilities. Therefore, the development of new effective methods for such an assessment is an urgent task especially in questions related to high-rise construction. The article formally sets the task of assessing the technical facilities of a construction organization. Due to the use of expert methods, the weighted values of the coefficients of local indicators for technical facilities are identified

NASA's 2004 Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jacobson, David T.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2004-01-01

An overview of NASA's Hall thruster research and development tasks conducted during fiscal year 2004 is presented. These tasks focus on: raising the technology readiness level of high power Hall thrusters, developing a moderate-power/ moderate specific impulse Hall thruster, demonstrating high-power/high specific impulse Hall thruster operation, and addressing the fundamental technical challenges of emerging Hall thruster concepts. Programmatic background information, technical accomplishments and out year plans for each program element performed under the sponsorship of the In-Space Transportation Program, Project Prometheus, and the Energetics Project are provided.

NASA University Research Centers Technical Advances in Aeronautics, Space Sciences and Technology, Earth Systems Sciences, Global Hydrology, and Education. Volumes 2 and 3

NASA Technical Reports Server (NTRS)

Coleman, Tommy L. (Editor); White, Bettie (Editor); Goodman, Steven (Editor); Sakimoto, P. (Editor); Randolph, Lynwood (Editor); Rickman, Doug (Editor)

1998-01-01

This volume chronicles the proceedings of the 1998 NASA University Research Centers Technical Conference (URC-TC '98), held on February 22-25, 1998, in Huntsville, Alabama. The University Research Centers (URCS) are multidisciplinary research units established by NASA at 11 Historically Black Colleges or Universities (HBCU's) and 3 Other Minority Universities (OMU's) to conduct research work in areas of interest to NASA. The URC Technical Conferences bring together the faculty members and students from the URC's with representatives from other universities, NASA, and the aerospace industry to discuss recent advances in their fields.

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2004-05-07

The objective of this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine.more » This technical progress report covers work performed by Delphi from July 1, 2003 to December 31, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; Task 9 Stack Testing with Coal-Based Reformate; and Task 10 Technology Transfer from SECA CORE Technology Program. In this reporting period, unless otherwise noted Task 6--System Fabrication and Task 7--System Testing will be reported within Task 1 System Design and Integration. Task 8--Program Management, Task 9--Stack Testing with Coal Based Reformate, and Task 10--Technology Transfer from SECA CORE Technology Program will be reported on in the Executive Summary section of this report.« less

Goddard Geophysical and Astronomical Observatory

NASA Technical Reports Server (NTRS)

Redmond, Jay; Kodak, Charles

2004-01-01

This report summarizes the technical parameters and the technical staff of the VLBI system at the fundamental station GGAO. It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

Using Functional Flow Diagrams to Enhance Technical Systems Understanding.

ERIC Educational Resources Information Center

Satchwell, Richard E.

1997-01-01

A treatment group of 20 aviation students used training manuals that presented functional flow diagrams before schematic diagrams. Comparison of data from 10 controls on a card-sort task showed that functional flow diagrams enhanced understanding of technical systems. (SK)

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-06-09

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A); and Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustionmore » engine. This technical progress report covers work performed by Delphi from July through December 2002 under Department of Energy Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: Task 1--System Design and Integration; Task 2--Solid Oxide Fuel Cell Stack Developments; Task 3--Reformer Developments; Task 4--Development of Balance of Plant (BOP) Components; Task 5--Manufacturing Development (Privately Funded); Task 6--System Fabrication; and Task 7--System Testing.« less

APPLICATION AND DEVELOPMENT OF APPROPRIATE TOOLS AND TECHNOLOGIES FOR COST-EFFECTIVE CARBON

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Ellen Hawes

2003-09-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: advanced videography testing; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Sandra Brown; Patrick Gonzalez

2004-07-10

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas impacts. The research described in this report occurred between July 1, 2002 and June 30, 2003. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: remote sensing for carbon analysis; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Rehabilitation with dental prosthesis can increase cerebral regional blood volume.

PubMed

Miyamoto, Ikuya; Yoshida, Kazuya; Tsuboi, Yoichi; Iizuka, Tadahiko

2005-12-01

Treatment with denture for edentulous people is highly important for maintaining quality of life. However, its effect on the brain is unknown. In this experimental study, we hypothesized that dental prosthesis can recover not only the physical condition of mastication system but also the regional brain activity. We evaluated functional brain imaging of edentulous subjects fixed by dental implant prosthesis with clenching tasks by multi-channel near-infrared optical topography. Results revealed a significantly (P<0.001; paired t-test) increased cerebral regional blood volume during maximum voluntary clenching task by implant-retained prosthesis. There were no statistically significant differences between patients with and without prosthesis in the latency to the maximum regional blood volume after the task. Conclusively, clenching can be effective for increasing cerebral blood volume; accordingly maintenance of normal chewing might prevent the brain from degenerating.

User-Centered Indexing for Adaptive Information Access

NASA Technical Reports Server (NTRS)

Chen, James R.; Mathe, Nathalie

1996-01-01

We are focusing on information access tasks characterized by large volume of hypermedia connected technical documents, a need for rapid and effective access to familiar information, and long-term interaction with evolving information. The problem for technical users is to build and maintain a personalized task-oriented model of the information to quickly access relevant information. We propose a solution which provides user-centered adaptive information retrieval and navigation. This solution supports users in customizing information access over time. It is complementary to information discovery methods which provide access to new information, since it lets users customize future access to previously found information. It relies on a technique, called Adaptive Relevance Network, which creates and maintains a complex indexing structure to represent personal user's information access maps organized by concepts. This technique is integrated within the Adaptive HyperMan system, which helps NASA Space Shuttle flight controllers organize and access large amount of information. It allows users to select and mark any part of a document as interesting, and to index that part with user-defined concepts. Users can then do subsequent retrieval of marked portions of documents. This functionality allows users to define and access personal collections of information, which are dynamically computed. The system also supports collaborative review by letting users share group access maps. The adaptive relevance network provides long-term adaptation based both on usage and on explicit user input. The indexing structure is dynamic and evolves over time. Leading and generalization support flexible retrieval of information under similar concepts. The network is geared towards more recent information access, and automatically manages its size in order to maintain rapid access when scaling up to large hypermedia space. We present results of simulated learning experiments.

Do Surgeons and Gastroenterologists Describe Endoscopic Retrograde Cholangiopancreatography Differently? A Qualitative Study.

PubMed

Boehler, Margaret L; Roberts, Nicole; Sanfey, Hilary; Mellinger, John

2016-01-01

Endoscopic retrograde cholangiopancreatography (ERCP) is a technically challenging procedure performed by both surgeons and gastroenterologists. There is controversy in the field regarding the training necessary to perform ERCP. Widely disparate requisite volumes of experience to achieve proficiency have been published by representatives of each specialty. The basis for these differences has not been fully explored, with particular reference to the cognitive mindset of the different specialties. Structured cognitive task analytic interviews were conducted with 7 expert gastroenterologists and 4 expert surgeons from 4 institutions, each of whom performs ERCP as a common procedure in their clinical practice. A qualitative analysis and grounded theory approach was used, focusing specifically on duct cannulation as a critical procedural element. Transcripts were analyzed using Atlas.ti software. The qualitative analysis of 11 transcripts identified 173 unique codes from a total of 653 quotes. In all, 5 themes were found to describe the codes: judgment, teaching, techniques, principles, and equipment. Significant differences were noted between gastroenterologists and surgeons across these themes. Gastroenterologists placed emphasis on issues of judgment including rationale, and emphasized explanation and clarification in teaching. Surgeons placed more emphasis on use of visual cues, and emphasized technique and equipment nuances. The data suggest that gastroenterologists deconstruct ERCP competence based on application of rules and rationale through reflection. Surgeons focus more on visual and tactile cues in task deconstruction, and may be more likely to measure proficiency based on technical response to such cues. Based on this study, it is proposed that both specialties might have complementary roles in training therapeutic endoscopists. Copyright © 2015 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Advanced Residual Strength Degradation Rate Modeling for Advanced Composite Structures. Volume II. Tasks II and III.

DTIC Science & Technology

1981-07-01

ADVANCED COMPOSITE STRUCTURES VOLUME II - TASKS Ix AND III K. N. Lauraitis Tl J. T. Ryder ?l4 D. E. Pettit ~ Lockheed-California Company S Burbank...Strength Degradation Rate Final Report Modeling for Advanced Composite Structures 1 July 1979 to 29 May 1981 Vol II - Task II and III S. PERFORMIN ONG...identify by block namber) composites , graphite/epoxy, impact damage, damaged holes, fatigue, damage propagation, residual strength, NDI 20. ABSTRACT

Maintenance Resources by Building Use for U.S. Army Installations. Volume 2. Appendices A through H

DTIC Science & Technology

1991-05-01

Installations, Volume II: Appendices A Through H RDTE dated 1980REIMB 1984 6 . AUTHOR(S) Edgar S. Neely and Robert D. Neathammer 7 . PERFORML’JG...Recurring Maintenance Factor 1.10 MRT For Major Cost Tasks and Replacement Tasks Decade 1 2 3 4 6 7 8 9 10 0 .000 .000 .000 .000 .000 .050 .190 .240 .300 .280...Special Condition Multiplier 1.00 Annual Recurring Maintenance Factor .79 MRT For Major Cost Tasks and Replacement Tasks Decade 1 2 3 4 6 7 8 9 10 0

Development, Implementation, and Evaluation of Leadership/Management Training within Army Battalions. Volume 2. Technical Appendices

DTIC Science & Technology

1975-06-01

8217- r AD-A012 774 DEVELOPMENT, IMPLEMENTATION, AND EVALUATION OF LEADERSHIP / MANAGEMENT TRAINING WITHIN ARMY BATTALIONS. VOLUME 2. TECHNICAL...and Identify by block numbera) This report describes the development and eva.L.uuLion of an experiential-based, leadership / management trai iing...organizational intervention and change similar to that presented in Figure H-1. According to this approach, training in more effective leadership / management skills

A Comprehensive and Systematic Evaluation of the Community Action Program and Related Programs Operating in Atlanta, Georgia, Volume 1. Technical Report, 1 May 1966 - 30 June 1969.

ERIC Educational Resources Information Center

Crawford, Fred R.

The two technical reports in this volume are devoted to describing the poor in Atlanta, and the persons who become clients in the service programs operated by Economic Opportunity Atlanta, and deal with residents of the areas served by the Neighborhood Service Centers located in the target area. Two samples are identified specifically: the Cohort…

Task Goal Attributes, n Achievement, and Supervisory Performance. Technical Report No. 30.

ERIC Educational Resources Information Center

Steers, Richard M.

A review of the research literature on goal-setting in organizational settings reveals that goal-setting on an individual job results in better task performance. However, the processes behind their effectiveness is unclear. For example, how are various job attributes of task goals related to performance, and how do various individual differences…

Differences in Writers' Initial Task Representations. Technical Report No. 35.

ERIC Educational Resources Information Center

Carey, Linda; And Others

An exploratory study investigated how writers represent their task to themselves before beginning to write. Using data from verbal protocols, the initial plans of 12 writers (5 experts and 7 student writers) who were working on an expository writing task were examined. The protocols were coded for types of planning. Independent measures of the…

Evaluation of a Web Conferencing Tool and Collaborative Tasks in an Online Chinese Course

ERIC Educational Resources Information Center

Guo, Sijia

2014-01-01

This case study aims to explore the best practice of applying task-based language teaching (TBLT) via the web conferencing tool Blackboard Collaborate in a beginners' online Chinese course by evaluating the technical capacity of the software and the pedagogical values and limitations of the tasks designed. In this paper, Chapelle's (2001) criteria…

Access management implementation in Kentucky technical support document and status report.

DOT National Transportation Integrated Search

2008-05-01

This report describes the efforts of the Kentucky Transportation Cabinet's Access Management implementation Task Force. The task force was established in May 2004 and was charged with the responsibility of reviewing and refining the recommendations i...

Patterns of lung volume use during an extemporaneous speech task in persons with Parkinson disease.

PubMed

Bunton, Kate

2005-01-01

This study examined patterns of lung volume use in speakers with Parkinson disease (PD) during an extemporaneous speaking task. The performance of a control group was also examined. Behaviors described are based on acoustic, kinematic and linguistic measures. Group differences were found in breath group duration, lung volume initiation, and lung volume termination measures. Speakers in the control group alternated between a longer and shorter breath groups. With starting lung volumes being higher for the longer breath groups and lower for shorter breath groups. Speech production was terminated before reaching tidal end expiratory level. This pattern was also seen in 4 of 7 speakers with PD. The remaining 3 PD speakers initiated speech at low starting lung volumes and continued speaking below EEL. This subgroup of PD speakers ended breath groups at agrammatical boundaries, whereas control speakers ended at appropriate grammatical boundaries. As a result of participating in this exercise, the reader will (1) be able to describe the patterns of lung volume use in speakers with Parkinson disease and compare them with those employed by control speakers; and (2) obtain information about the influence of speaking task on speech breathing.

The Effect of a Workload-Preview on Task-Prioritization and Task-Performance

ERIC Educational Resources Information Center

Minotra, Dev

2012-01-01

With increased volume and sophistication of cyber attacks in recent years, maintaining situation awareness and effective task-prioritization strategy is critical to the task of cybersecurity analysts. However, high levels of mental-workload associated with the task of cybersecurity analyst's limits their ability to prioritize tasks.…

Laparoscopic skills suffer on the first shift of sequential night shifts: program directors beware and residents prepare.

PubMed

Leff, Daniel R; Aggarwal, Rajesh; Rana, Mariam; Nakhjavani, Batool; Purkayastha, Sanjay; Khullar, Vik; Darzi, Ara W

2008-03-01

Research evaluating fatigue-induced skills decline has focused on acute sleep deprivation rather than the effects of circadian desynchronization associated with multiple shifts. As a result, the number of consecutive night shifts that residents can safely be on duty without detrimental effects to their technical skills remains unknown. A prospective observational cohort study was conducted to assess the impact of 7 successive night shifts on the technical surgical performance of junior residents. The interventional strategy included training 21 residents from surgery and allied disciplines on a virtual reality surgical simulator, towards the achievement of preset benchmark scores, followed by 294 technical skills assessments conducted over 1764 manpower night shift hours. Primary outcomes comprised serial technical skills assessments on 2 tasks of a virtual reality surgical simulator. Secondary outcomes included assessments of introspective fatigue, duration of sleep, and prospective recordings of activity (number of "calls" received, steps walked, and patients evaluated). Maximal deterioration in performance was observed following the first night shift. Residents took significantly longer to complete the first (P = 0.002) and second tasks (P = 0.005) compared with baseline. They also committed significantly greater numbers of errors (P = 0.025) on the first task assessed. Improved performance was observed across subsequent shifts towards baseline levels. Newly acquired technical surgical skills deteriorate maximally after the first night shift, emphasizing the importance of adequate preparation for night rotas. Performance improvements across successive shifts may be due to ongoing learning or adaptation to chronic fatigue. Further research should focus on assessments of both technical procedural skills and cognitive abilities to determine the rotas that best minimize errors and maximize patient safety.

Field Measurement Of Naturalistic Backing Behavior, Technical Report

DOT National Transportation Integrated Search

1995-12-01

A SERIES OF OBSERVATIONS AND MEASUREMENTS WERE MADE AS 21 SUBJECTS DROVE THEIR OWN VEHICLES IN AN ASSORTMENT OF NATURALISTIC BACKING TASKS. THE TASKS WERE PERFORMED ON PUBLIC ROADS IN REAL WORLD DRIVING CONDITIONS. AS THE SUBJECTS PERFORMED THE EIGHT...

Where size does matter: foldable telescope design for microsat application

NASA Astrophysics Data System (ADS)

Segert, Tom; Danziger, Björn; Lieder, Matthias

2017-11-01

The DOBSON SPACE TELESCOPE Project (DST) at the Technical University of Berlin (TUB) believes that micro satellites can be a challenging competitor in the high resolution remote sensing market. Using a micro satellite as basis for a remote sensing platform will dramatically reduce the cost for the end users thereby initiating the predicted remote sensing boom. The Challenging task is that an optic required for a GSD smaller than 1m is much bigger than the given room for secondary payload. In order to break the volume limits of hitchhiker payloads the DST team develops an optical telescope with deployable structures. The core piece of DST is a 20 inch modified Cassegrain optic. Stored during ascend the instrument fits in a box measuring 60 x 60 x 30cm (including telescope and optical plane assembly). After the satellite was released into free space the telescope unfolds and collimates automatically.

Making intelligent systems team players: Overview for designers

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Schreckenghost, Debra L.

1992-01-01

This report is a guide and companion to the NASA Technical Memorandum 104738, 'Making Intelligent Systems Team Players,' Volumes 1 and 2. The first two volumes of this Technical Memorandum provide comprehensive guidance to designers of intelligent systems for real-time fault management of space systems, with the objective of achieving more effective human interaction. This report provides an analysis of the material discussed in the Technical Memorandum. It clarifies what it means for an intelligent system to be a team player, and how such systems are designed. It identifies significant intelligent system design problems and their impacts on reliability and usability. Where common design practice is not effective in solving these problems, we make recommendations for these situations. In this report, we summarize the main points in the Technical Memorandum and identify where to look for further information.

Effects of kinesthetic versus visual imagery practice on two technical dance movements: a pilot study.

PubMed

Girón, Elizabeth Coker; McIsaac, Tara; Nilsen, Dawn

2012-03-01

Motor imagery is a type of mental practice that involves imagining the body performing a movement in the absence of motor output. Dance training traditionally incorporates mental practice techniques, but quantitative effects of motor imagery on the performance of dance movements are largely unknown. This pilot study compared the effects of two different imagery modalities, external visual imagery and kinesthetic imagery, on pelvis and hip kinematics during two technical dance movements, plié and sauté. Each of three female dance students (mean age = 19.7 years, mean years of training = 10.7) was assigned to use a type of imagery practice: visual imagery, kinesthetic imagery, or no imagery. Effects of motor imagery on peak external hip rotation varied by both modality and task. Kinesthetic imagery increased peak external hip rotation for pliés, while visual imagery increased peak external hip rotation for sautés. Findings suggest that the success of motor imagery in improving performance may be task-specific. Dancers may benefit from matching imagery modality to technical tasks in order to improve alignment and thereby avoid chronic injury.

Improved Anvil Forecasting

NASA Technical Reports Server (NTRS)

Lambert, Winifred C.

2000-01-01

This report describes the outcome of Phase 1 of the AMU's Improved Anvil Forecasting task. Forecasters in the 45th Weather Squadron and the Spaceflight Meteorology Group have found that anvil forecasting is a difficult task when predicting LCC and FR violations. The purpose of this task is to determine the technical feasibility of creating an anvil-forecasting tool. Work on this study was separated into three steps: literature search, forecaster discussions, and determination of technical feasibility. The literature search revealed no existing anvil-forecasting techniques. However, there appears to be growing interest in anvils in recent years. If this interest continues to grow, more information will be available to aid in developing a reliable anvil-forecasting tool. The forecaster discussion step revealed an array of methods on how better forecasting techniques could be developed. The forecasters have ideas based on sound meteorological principles and personal experience in forecasting and analyzing anvils. Based on the information gathered in the discussions with the forecasters, the conclusion of this report is that it is technically feasible at this time to develop an anvil forecasting technique that will significantly contribute to the confidence in anvil forecasts.

Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion

NASA Technical Reports Server (NTRS)

Hanley, David; Carella, John

1999-01-01

This document, submitted by AlliedSignal Engines (AE), a division of AlliedSignal Aerospace Company, presents the program final report for the Advanced High Temperature Polymer Matrix Composites for Gas Turbine Engines Program Expansion in compliance with data requirements in the statement of work, Contract No. NAS3-97003. This document includes: 1 -Technical Summary: a) Component Design, b) Manufacturing Process Selection, c) Vendor Selection, and d) Testing Validation: 2-Program Conclusion and Perspective. Also, see the Appendix at the back of this report. This report covers the program accomplishments from December 1, 1996, to August 24, 1998. The Advanced High Temperature PMC's for Gas Turbine Engines Program Expansion was a one year long, five task technical effort aimed at designing, fabricating and testing a turbine engine component using NASA's high temperature resin system AMB-21. The fiber material chosen was graphite T650-35, 3K, 8HS with UC-309 sizing. The first four tasks included component design and manufacturing, process selection, vendor selection, component fabrication and validation testing. The final task involved monthly financial and technical reports.

TECHNICAL MANPOWER IN NEW YORK STATE. VOLUME II.

ERIC Educational Resources Information Center

AMATULLI, ANGELO; AND OTHERS

THE JOB CONTENT OF THE TECHNICAL OCCUPATIONS AND THE TECHNICAL SKILLS AND SUBJECT MATTER KNOWLEDGES REQUIRED ARE BASED PRIMARILY ON INFORMATION SUPPLIED BY EMPLOYERS FROM 17,414 ESTABLISHMENTS IN NEW YORK STATE. DATA ARE ALSO GIVEN ON GRADE STRUCTURE, EDUCATION AND EXPERIENCE REQUIREMENTS, TESTS AND LICENSES REQUIRED FOR THE JOB, SOURCES OF…

NASA Langley scientific and technical information output: 1994, volume 1

NASA Technical Reports Server (NTRS)

Phillips, Marilou S. (Compiler); Stewart, Susan H. (Compiler)

1995-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1994. Included are citations for Formal Reports, High-Numbered Conference Publications, High-Numbered Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Computer Programs, Tech Briefs, and Patents.

NASA Langley Scientific and Technical Information Output: 1994. Volume 1

NASA Technical Reports Server (NTRS)

Phillips, Marilou S. (Compiler); Stewart, Susan H. (Compiler)

1995-01-01

This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1994. Included are citations for Formal Reports, High-Numbered Conference Publications, High-Numbered Technical Memorandums, Contractor Reports, Journal Articles and Other Publications, Meeting Presentations, Computer Programs, Tech Briefs, and Patents.

Chinese-English Technical Dictionaries. Volume 1, Aviation and Space.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. Aerospace Technology Div.

The present dictionary is the first of a series of Chinese-English technical dictionaries under preparation by the Aerospace Technology Division of the Library of Congress. The purpose of the series is to provide rapid reference tools for translators, abstractors, and research analysts concerned with scientific and technical materials published in…

Lift cruise fan V/STOL aircraft conceptual design study T-39 modification. Volume 1: Technical report

NASA Technical Reports Server (NTRS)

Elliott, D. W.

1976-01-01

The conversion of two T-39 aircraft into lift cruise fan research and technology vehicles is discussed. The concept is based upon modifying the T-39A (NA265-40) Sabreliner airframe into a V/STOL configuration by incorporating two LCF-459 lift cruise fans and three YJ-97 gas generators. The propulsion concept provides the thrust for horizontal flight or lift for vertical flight by deflection of bifurcated nozzles while maintaining engine out safety throughout the flight envelope. The configuration meets all the study requirements specified for the design with control powers in VTOL and conversion in excess of the requirement making it an excellent vehicle for research and development. The study report consists of two volumes; Volume 1 (Reference a) contains background data detailed description and technical substantiation of the aircraft. Volume 2 includes cost data, scheduling and program planning not addressed in Volume 1.

JV Task 120 - Coal Ash Resources Research Consortium Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Debra Pflughoeft-Hassett; Loreal Heebink; David Hassett

2009-03-28

The Coal Ash Resources Research Consortium{reg_sign} (CARRC{reg_sign}, pronounced 'cars') is the core coal combustion product (CCP) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCPs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCP utilization and ensuring its successful application. The U.S. Department of Energy is a partner in CARRC through the EERC Jointly Sponsored Research Program, which provides matching funds for industrial member contributions and facilitates an increased levelmore » of effort in CARRC. CARRC tasks were designed to provide information on CCP performance, including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC technical research tasks are developed based on member input and prioritization. CARRC special projects are developed with members and nonmembers to provide similar information and to support activities, including the assembly and interpretation of data, support for standards development and technology transfer, and facilitating product development and testing. CARRC activities from 2007 to 2009 included a range of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCPs. The tasks were included in four categories: (1) Environmental Evaluations of CCPs; (2) Evaluation of Impacts on CCPs from Emission Controls; (3) Construction and Product-Related Activities; and (4) Technology Transfer and Maintenance Tasks. All tasks are designed to work toward achieving the CARRC overall goal and supporting objectives. The various tasks are coordinated in order to provide broad and useful technical data for CARRC members. Special projects provide an opportunity for non-CARRC members to sponsor specific research or technology transfer consistent with CARRC goals. This report covers CARRC activities from January 2007 through March 2009. These activities have been reported in CARRC Annual Reports and in member meetings over the past 2 years. CARRC continues to work with industry and various government agencies with its research, development, demonstration, and promotional activities nearing completion at the time of submission of this report. CARRC expects to continue its service to the coal ash industry in 2009 and beyond to work toward the common goal of advancing coal ash utilization by solving CCP-related technical issues and promoting the environmentally safe, technically sound, and economically viable management of these complex and changing materials.« less

Frequency Domain Computer Programs for Prediction and Analysis of Rail Vehicle Dynamics : Volume 1. Technical Report

DOT National Transportation Integrated Search

1975-12-01

Frequency domain computer programs developed or acquired by TSC for the analysis of rail vehicle dynamics are described in two volumes. Volume I defines the general analytical capabilities required for computer programs applicable to single rail vehi...

A Summary of Technical Problems Associated With Broadband Cable Teleservices Development. A Survey of Technical Requirements for Broadband Cable Teleservices; Volume One.

ERIC Educational Resources Information Center

McManamon, P. M.; Utlaut, W. F.

The results of a survey of cable television (CATV) and related technological industries are summarized. In this, the first of a series of seven reports, attention is focused upon some major technical factors which need to be considered in order that a transition from the technical state of today's cable television and services to new teleservices…

Face-Name Association Learning and Brain Structural Substrates in Alcoholism

PubMed Central

Pitel, Anne-Lise; Chanraud, Sandra; Rohlfing, Torsten; Pfefferbaum, Adolf; Sullivan, Edith V.

2011-01-01

Background Associative learning is required for face-name association and is impaired in alcoholism, but the cognitive processes and brain structural components underlying this deficit remain unclear. It is also unknown whether prompting alcoholics to implement a deep level of processing during face-name encoding would enhance performance. Methods Abstinent alcoholics and controls performed a levels-of-processing face-name learning task. Participants indicated whether the face was that of an honest person (deep encoding) or that of a man (shallow encoding). Retrieval was examined using an associative (face-name) recognition task and a single-item (face or name only) recognition task. Participants also underwent a 3T structural MRI. Results Compared with controls, alcoholics had poorer associative and single-item recognition, each impaired to the same extent. Level of processing at encoding had little effect on recognition performance but affected reaction time. Correlations with brain volumes were generally modest and based primarily on reaction time in alcoholics, where the deeper the processing at encoding, the more restricted the correlations with brain volumes. In alcoholics, longer control task reaction times correlated modestly with volumes across several anterior to posterior brain regions; shallow encoding correlated with calcarine and striatal volumes; deep encoding correlated with precuneus and parietal volumes; associative recognition RT correlated with cerebellar volumes. In controls, poorer associative recognition with deep encoding correlated significantly with smaller volumes of frontal and striatal structures. Conclusions Despite prompting, alcoholics did not take advantage of encoding memoranda at a deep level to enhance face-name recognition accuracy. Nonetheless, conditions of deeper encoding resulted in faster reaction times and more specific relations with regional brain volumes than did shallow encoding. The normal relation between associative recognition and corticostriatal volumes was not present in alcoholics. Rather, their speeded reaction time occurred at the expense of accuracy and was related most robustly to cerebellar volumes. PMID:22509954

Face-name association learning and brain structural substrates in alcoholism.

PubMed

Pitel, Anne-Lise; Chanraud, Sandra; Rohlfing, Torsten; Pfefferbaum, Adolf; Sullivan, Edith V

2012-07-01

Associative learning is required for face-name association and is impaired in alcoholism, but the cognitive processes and brain structural components underlying this deficit remain unclear. It is also unknown whether prompting alcoholics to implement a deep level of processing during face-name encoding would enhance performance. Abstinent alcoholics and controls performed a levels-of-processing face-name learning task. Participants indicated whether the face was that of an honest person (deep encoding) or that of a man (shallow encoding). Retrieval was examined using an associative (face-name) recognition task and a single-item (face or name only) recognition task. Participants also underwent 3T structural MRI. Compared with controls, alcoholics had poorer associative and single-item learning and performed at similar levels. Level of processing at encoding had little effect on recognition performance but affected reaction time (RT). Correlations with brain volumes were generally modest and based primarily on RT in alcoholics, where the deeper the processing at encoding, the more restricted the correlations with brain volumes. In alcoholics, longer control task RTs correlated modestly with smaller tissue volumes across several anterior to posterior brain regions; shallow encoding correlated with calcarine and striatal volumes; deep encoding correlated with precuneus and parietal volumes; and associative recognition RT correlated with cerebellar volumes. In controls, poorer associative recognition with deep encoding correlated significantly with smaller volumes of frontal and striatal structures. Despite prompting, alcoholics did not take advantage of encoding memoranda at a deep level to enhance face-name recognition accuracy. Nonetheless, conditions of deeper encoding resulted in faster RTs and more specific relations with regional brain volumes than did shallow encoding. The normal relation between associative recognition and corticostriatal volumes was not present in alcoholics. Rather, their speeded RTs occurred at the expense of accuracy and were related most robustly to cerebellar volumes. Copyright © 2012 by the Research Society on Alcoholism.

Communication Behaviors and Trust in Collaborative Online Teams

ERIC Educational Resources Information Center

Bulu, Saniye Tugba; Yildirim, Zahide

2008-01-01

This study investigates preservice teachers' trust levels and collaborative communication behaviors namely leadership, feedback, social interaction, enthusiasm, task and technical uncertainties, and task-oriented interactions in online learning environment. A case study design involving qualitative and quantitative data collection and analysis was…

Planning emergency medical communications

DOT National Transportation Integrated Search

1996-06-01

This technical bulletin summarizes a two volume publication entitled "Planning Emergency Medical Communications." Volume One, the State Level Planning Guide, contains general background information about a two tiered approach to EMS communications pl...

Proceedings: Computer Science and Data Systems Technical Symposium, volume 1

NASA Technical Reports Server (NTRS)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form are included for topics in three categories: computer science, data systems and space station applications.

The Effect of Instruction on the Acquisition of Conservation of Volume.

ERIC Educational Resources Information Center

Butts, David P.; Howe, Ann C.

Tested was the hypothesis that science instruction based on task analysis will lead to the acquisition of the ability to perform certain Piaget volume tasks which have been characterized as requiring formal operations for their solutions. A Test on Formal Operations and a Learning Hierarchies Test were given to fourth- and sixth-grade students in…

A survey-based cross-sectional study of doctors' expectations and experiences of non-technical skills for Out of Hours work.

PubMed

Brown, Michael; Shaw, Dominick; Sharples, Sarah; Jeune, Ivan Le; Blakey, John

2015-02-16

The skill set required for junior doctors to work efficiently and safely Out of Hours (OoH) in hospitals has not been established. This is despite the OoH period representing 75% of the year and it being the time of highest mortality. We set out to explore the expectations of medical students and experiences of junior doctors of the non-technical skills needed to work OoH. Survey-based cross-sectional study informed by focus groups. Online survey with participants from five large teaching hospitals across the UK. 300 Medical Students and Doctors Participants ranked the importance of non-technical skills, as identified by literature review and focus groups, needed for OoH care. The focus groups revealed a total of eight non-technical skills deemed to be important. In the survey 'Task Prioritisation' (mean rank 1.617) was consistently identified as the most important non-technical skill. Stage of training affected the ranking of skills, with significant differences for 'Communication with Senior Doctors', 'Dealing with Clinical Isolation', 'Task Prioritisation' and 'Communication with Patients'. Importantly, there was a significant discrepancy between the medical student expectations and experiences of doctors undertaking work. Our findings suggest that medical staff particularly value task prioritisation skills; however, these are not routinely taught in medical schools. The discrepancy between expectations of students and experience of doctors reinforces the idea that there is a gap in training. Doctors of different grades place different importance on specific non-technical skills with implications for postgraduate training. There is a pressing need for medical schools and deaneries to review non-technical training to include more than communication skills. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

TASK-2: a K2P K+ channel with complex regulation and diverse physiological functions

PubMed Central

Cid, L. Pablo; Roa-Rojas, Hugo A.; Niemeyer, María I.; González, Wendy; Araki, Masatake; Araki, Kimi; Sepúlveda, Francisco V.

2013-01-01

TASK-2 (K2P5.1) is a two-pore domain K+ channel belonging to the TALK subgroup of the K2P family of proteins. TASK-2 has been shown to be activated by extra- and intracellular alkalinization. Extra- and intracellular pH-sensors reside at arginine 224 and lysine 245 and might affect separate selectivity filter and inner gates respectively. TASK-2 is modulated by changes in cell volume and a regulation by direct G-protein interaction has also been proposed. Activation by extracellular alkalinization has been associated with a role of TASK-2 in kidney proximal tubule bicarbonate reabsorption, whilst intracellular pH-sensitivity might be the mechanism for its participation in central chemosensitive neurons. In addition to these functions TASK-2 has been proposed to play a part in apoptotic volume decrease in kidney cells and in volume regulation of glial cells and T-lymphocytes. TASK-2 is present in chondrocytes of hyaline cartilage, where it is proposed to play a central role in stabilizing the membrane potential. Additional sites of expression are dorsal root ganglion neurons, endocrine and exocrine pancreas and intestinal smooth muscle cells. TASK-2 has been associated with the regulation of proliferation of breast cancer cells and could become target for breast cancer therapeutics. Further work in native tissues and cells together with genetic modification will no doubt reveal the details of TASK-2 functions that we are only starting to suspect. PMID:23908634

Activities of the Oil Implementation Task Force; Contracts for field projects and supporting research on enhanced oil recovery, July--September 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tiedemann, H.A.

1991-05-01

The report contains a general introduction and background to DOE's revised National Energy Strategy Advanced Oil Recovery Program and activities of the Oil Implementation Task Force; a detailed synopsis of the symposium, including technical presentations, comments and suggestions; a section of technical information on deltaic reservoirs; and appendices containing a comprehensive listing of references keyed to general deltaic and geological aspects of reservoirs and those relevant to six selected deltaic plays. Enhanced recovery processes include chemical floodings, gas displacement, thermal recovery, geoscience, and microbial recovery.

Documentation of the GLAS fourth order general circulation model. Volume 2: Scalar code

NASA Technical Reports Server (NTRS)

Kalnay, E.; Balgovind, R.; Chao, W.; Edelmann, D.; Pfaendtner, J.; Takacs, L.; Takano, K.

1983-01-01

Volume 2, of a 3 volume technical memoranda contains a detailed documentation of the GLAS fourth order general circulation model. Volume 2 contains the CYBER 205 scalar and vector codes of the model, list of variables, and cross references. A variable name dictionary for the scalar code, and code listings are outlined.

Space transfer vehicle concepts and requirements. Volume 4: Summary of special studies

NASA Technical Reports Server (NTRS)

1993-01-01

Our final report for Phase 1 addressed the future space transportation needs and requirements based on the current assets, at the time, and their evolution through technology/advanced development using a path and schedule that supported the world leadership role of the United States in a responsible and realistic financial forecast. Always, and foremost, the recommendations placed high values on the safety and success of missions both manned and unmanned through a total quality management philosophy at Martin Marietta. The second phase of the STV contract involved the use of Technical Directives (TD) to provide short-term support for specialized tasks as required by the COTR. Three of these tasks were performed in parallel with Phase 1. These tasks were the Liquid Acquisition Experiment (LACE), Liquid Reorientation Experiment (LIRE), and Expert System for Design, Operation, and Technology Studies (ESDOTS). The results of these TD's were reported in conjunction with the Phase 1 Final Report. Cost analysis of existing launch systems has demonstrated a need for a new upper stage that will increase America's competitiveness in the global launch services market. To provide a growth path of future exploration class STV's, near-term low-cost upper stages featuring modularity, portability, scalability, and evolvability must be developed. These recommendations define a program that: leverages ongoing activities to establish a new development environment, develop technologies that benefit the entire life cycle of a system, and result in a scalable hardware platform that provides a growth path to future upper stages.

The non-technical skills used by anaesthetic technicians in critical incidents reported to the Australian Incident Monitoring System between 2002 and 2008.

PubMed

Rutherford, J S; Flin, R; Irwin, A

2015-07-01

The outcome of critical incidents in the operating theatre has been shown to be influenced by the behaviour of anaesthetic technicians (ATs) assisting anaesthetists, but the specific non-technical skills involved have not been described. We performed a review of critical incidents (n=1433) reported to the Australian Incident Monitoring System between 2002 and 2008 to identify which non-technical skills were used by ATs. The reports were assessed if they mentioned anaesthetic assistance or had the boxes ticked to identify "inadequate assistance" or "absent supervision or assistance". A total of 90 critical incidents involving ATs were retrieved, 69 of which described their use of non-technical skills. In 20 reports, the ATs ameliorated the critical incident, whilst in 46 they exacerbated the critical incident, and three cases had both positive and negative non-technical skills described. Situation awareness was identified in 39 reports, task management in 23, teamwork in 21 and decision-making in two, but there were no descriptions of issues related to leadership, stress or fatigue management. Situation awareness, task management and teamwork appear to be important non-technical skills for ATs in the development or management of critical incidents in the operating theatre. This analysis has been used to support the development of a non-technical skills taxonomy for anaesthetic assistants.

Fundamentals of neurosurgery: virtual reality tasks for training and evaluation of technical skills.

PubMed

Choudhury, Nusrat; Gélinas-Phaneuf, Nicholas; Delorme, Sébastien; Del Maestro, Rolando

2013-11-01

Technical skills training in neurosurgery is mostly done in the operating room. New educational paradigms are encouraging the development of novel training methods for surgical skills. Simulation could answer some of these needs. This article presents the development of a conceptual training framework for use on a virtual reality neurosurgical simulator. Appropriate tasks were identified by reviewing neurosurgical oncology curricula requirements and performing cognitive task analyses of basic techniques and representative surgeries. The tasks were then elaborated into training modules by including learning objectives, instructions, levels of difficulty, and performance metrics. Surveys and interviews were iteratively conducted with subject matter experts to delimitate, review, discuss, and approve each of the development stages. Five tasks were selected as representative of basic and advanced neurosurgical skill. These tasks were: 1) ventriculostomy, 2) endoscopic nasal navigation, 3) tumor debulking, 4) hemostasis, and 5) microdissection. The complete training modules were structured into easy, intermediate, and advanced settings. Performance metrics were also integrated to provide feedback on outcome, efficiency, and errors. The subject matter experts deemed the proposed modules as pertinent and useful for neurosurgical skills training. The conceptual framework presented here, the Fundamentals of Neurosurgery, represents a first attempt to develop standardized training modules for technical skills acquisition in neurosurgical oncology. The National Research Council Canada is currently developing NeuroTouch, a virtual reality simulator for cranial microneurosurgery. The simulator presently includes the five Fundamentals of Neurosurgery modules at varying stages of completion. A first pilot study has shown that neurosurgical residents obtained higher performance scores on the simulator than medical students. Further work will validate its components and use in a training curriculum. Copyright © 2013 N. Choudhury. Published by Elsevier Inc. All rights reserved.

Recommendations for a Standardized Pulmonary Function Report. An Official American Thoracic Society Technical Statement.

PubMed

Culver, Bruce H; Graham, Brian L; Coates, Allan L; Wanger, Jack; Berry, Cristine E; Clarke, Patricia K; Hallstrand, Teal S; Hankinson, John L; Kaminsky, David A; MacIntyre, Neil R; McCormack, Meredith C; Rosenfeld, Margaret; Stanojevic, Sanja; Weiner, Daniel J

2017-12-01

The American Thoracic Society committee on Proficiency Standards for Pulmonary Function Laboratories has recognized the need for a standardized reporting format for pulmonary function tests. Although prior documents have offered guidance on the reporting of test data, there is considerable variability in how these results are presented to end users, leading to potential confusion and miscommunication. A project task force, consisting of the committee as a whole, was approved to develop a new Technical Standard on reporting pulmonary function test results. Three working groups addressed the presentation format, the reference data supporting interpretation of results, and a system for grading quality of test efforts. Each group reviewed relevant literature and wrote drafts that were merged into the final document. This document presents a reporting format in test-specific units for spirometry, lung volumes, and diffusing capacity that can be assembled into a report appropriate for a laboratory's practice. Recommended reference sources are updated with data for spirometry and diffusing capacity published since prior documents. A grading system is presented to encourage uniformity in the important function of test quality assessment. The committee believes that wide adoption of these formats and their underlying principles by equipment manufacturers and pulmonary function laboratories can improve the interpretation, communication, and understanding of test results.

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2005-10-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bill Stanley; Patrick Gonzalez; Sandra Brown

2006-01-01

The Nature Conservancy is participating in a Cooperative Agreement with the Department of Energy (DOE) National Energy Technology Laboratory (NETL) to explore the compatibility of carbon sequestration in terrestrial ecosystems and the conservation of biodiversity. The title of the research project is ''Application and Development of Appropriate Tools and Technologies for Cost-Effective Carbon Sequestration''. The objectives of the project are to: (1) improve carbon offset estimates produced in both the planning and implementation phases of projects; (2) build valid and standardized approaches to estimate project carbon benefits at a reasonable cost; and (3) lay the groundwork for implementing cost-effective projects,more » providing new testing ground for biodiversity protection and restoration projects that store additional atmospheric carbon. This Technical Progress Report discusses preliminary results of the six specific tasks that The Nature Conservancy is undertaking to answer research needs while facilitating the development of real projects with measurable greenhouse gas reductions. The research described in this report occurred between April 1st , 2005 and June 30th, 2005. The specific tasks discussed include: Task 1: carbon inventory advancements; Task 2: emerging technologies for remote sensing of terrestrial carbon; Task 3: baseline method development; Task 4: third-party technical advisory panel meetings; Task 5: new project feasibility studies; and Task 6: development of new project software screening tool.« less

FY 1995 Scientific and Technical Reports, Articles, Papers, and Presentations, Volume 1

NASA Technical Reports Server (NTRS)

Turner, Joyce E. (Compiler)

1995-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY95. It also includes papers of MSFC contractors. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Government Information Quarterly. Volume 7, no. 2: National Aeronautics and Space Administration Scientific and Technical Information Programs. Special issue

NASA Technical Reports Server (NTRS)

Hernon, Peter (Editor); Mcclure, Charles R. (Editor); Pinelli, Thomas E. (Editor)

1990-01-01

NASA scientific and technical information (STI) programs are discussed. Topics include management of information in a research and development agency, the new space and Earth science information systems at NASA's archive, scientific and technical information management, and technology transfer of NASA aerospace technology to other industries.

Programmatic Agreements for Project-Level Air Quality Analyses : NCHRP 25-25 Task 78

DOT National Transportation Integrated Search

2015-09-01

The research performed under Task 78 was divided into two phases. The first phase involved development of a draft Programmatic Agreement (PA) template and a draft Technical Support Document (TSD) template for project-level carbon monoxide (CO) hot-sp...

Addressing Control Research Issues Leading to Piloted Simulations in Support of the IFCS F-15

NASA Technical Reports Server (NTRS)

Napolitano, Marcello; Perhinschi, Mario; Campa, Giampiero; Seanor, Brad

2004-01-01

This report summarizes the research effort by a team of researchers at West Virginia University in support of the NASA Intelligent Flight Control System (IFCS) F-15 program. In particular, WVU researchers assisted NASA Dryden researchers in the following technical tasks leading to piloted simulation of the 'Gen_2' IFCS control laws. Task #1- Performance comparison of different neural network (NN) augmentation for the Dynamic Inversion (DI) -based VCAS 'Gen_2' control laws. Task #2- Development of safety monitor criteria for transition to research control laws with and without failure during flight test. Task #3- Fine-tuning of the 'Gen_2' control laws for cross-coupling reduction at post-failure conditions. Matlab/Simulink-based simulation codes were provided to the technical monitor on a regular basis throughout the duration of the project. Additional deliverables for the project were Power Point-based slides prepared for different project meetings. This document provides a description of the methodology and discusses the general conclusions from the simulation results.

Tools don't-and won't-make the man: A cognitive look at the future.

PubMed

Osiurak, François; Navarro, Jordan; Reynaud, Emanuelle; Thomas, Gauthier

2018-05-01

The question of whether tools erase cognitive and physical interindividual differences has been surprisingly overlooked in the literature. Yet if technology is profusely available in a near or far future, will we be equal in our capacity to use it? We sought to address this unexplored, fundamental issue, asking 200 participants to perform 3 physical (e.g., fine manipulation) and 3 cognitive tasks (e.g., calculation) in both non-tool-use and tool-use conditions. Here we show that tools do not erase but rather extend our intrinsic physical and cognitive skills. Moreover, this phenomenon of extension is task specific because we found no evidence for superusers, benefitting from the use of a tool irrespective of the task concerned. These results challenge the possibility that technical solutions could always be found to make people equal. Rather, technical innovation might be systematically limited by the user's initial degree of knowledge or skills for a given task. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

AGARD Flight Test Techniques Series. Volume 13. Reliability and Maintainability (Fiabilite’ et Maintenabilite’).

DTIC Science & Technology

1995-02-01

capabilities for the common benefit of the NATO community; — Providing scientific and technical advice and assistance to the Military Committee in the field...Exchange of scientific and technical information; — Providing assistance to member nations for the purpose of increasing their scientific and...technical potential; — Rendering scientific and technical assistance, as requested, to other NATO bodies and to member nations in connection with

Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.; Yoder, Dale

This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

Geospace Plasma Dynamics Laboratory Annual Task Report (FY11)

DTIC Science & Technology

2012-03-01

Site Contractors: Nagendra Singh, Ph.D., Physicist , 0.5 MY Neil Grossbard, M.S., Mathematician , 0.7 MY Visitors: Publications: Articles in...PhD Project Manager Division Chief, RVB This report is published in the interest of scientific and technical...Annual Task Report (FY11) 5c. PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) 5d. PROJECT NUMBER 2311 Daniel Ober 5e. TASK NUMBER

Development and Validation of Career Development Guidelines by Task/Activity Analysis of Occupational Safety and Health Professions: Industrial Hygiene and Safety Professional. Final Report. Technical Report XII.

ERIC Educational Resources Information Center

Vernon, Ralph J.; And Others

This report summarizes research findings which resulted in development of curricula for occupational safety and health professions based on task/activity analyses and related performance objectives. The first seven chapters focus on the seven objectives. Chapter 1, Literature Review and Selection of Employers, concerns tasks required for…

Annual Report of the National Science Foundation on Contract NSF-C414 Task III July 1966 through June 1967.

ERIC Educational Resources Information Center

American Chemical Society, Columbus, OH. Chemical Abstracts Service.

This Annual Report describes in detail the work performed during the first year of Task III of Contract NSF-C414 and the present status of Task III work. The programs and achievements described constitute the first significant efforts to develop a user-oriented, cooperative program between major secondary scientific and technical information…

Anatomical Coupling between Distinct Metacognitive Systems for Memory and Visual Perception

PubMed Central

McCurdy, Li Yan; Maniscalco, Brian; Metcalfe, Janet; Liu, Ka Yuet; de Lange, Floris P.; Lau, Hakwan

2015-01-01

A recent study found that, across individuals, gray matter volume in the frontal polar region was correlated with visual metacognition capacity (i.e., how well one’s confidence ratings distinguish between correct and incorrect judgments). A question arises as to whether the putative metacognitive mechanisms in this region are also used in other metacognitive tasks involving, for example, memory. A novel psychophysical measure allowed us to assess metacognitive efficiency separately in a visual and a memory task, while taking variations in basic task performance capacity into account. We found that, across individuals, metacognitive efficiencies positively correlated between the two tasks. However, voxel-based morphometry analysis revealed distinct brain structures for the two kinds of metacognition. Replicating a previous finding, variation in visual metacognitive efficiency was correlated with volume of frontal polar regions. However, variation in memory metacognitive efficiency was correlated with volume of the precuneus. There was also a weak correlation between visual metacognitive efficiency and precuneus volume, which may account for the behavioral correlation between visual and memory metacognition (i.e., the precuneus may contain common mechanisms for both types of metacognition). However, we also found that gray matter volumes of the frontal polar and precuneus regions themselves correlated across individuals, and a formal model comparison analysis suggested that this structural covariation was sufficient to account for the behavioral correlation of metacognition in the two tasks. These results highlight the importance of the precuneus in higher-order memory processing and suggest that there may be functionally distinct metacognitive systems in the human brain. PMID:23365229

Regional Differences in Brain Volume Predict the Acquisition of Skill in a Complex Real-Time Strategy Videogame

PubMed Central

Basak, Chandramallika; Voss, Michelle W.; Erickson, Kirk I.; Boot, Walter R.; Kramer, Arthur F.

2015-01-01

Previous studies have found that differences in brain volume among older adults predict performance in laboratory tasks of executive control, memory, and motor learning. In the present study we asked whether regional differences in brain volume as assessed by the application of a voxel-based morphometry technique on high resolution MRI would also be useful in predicting the acquisition of skill in complex tasks, such as strategy-based video games. Twenty older adults were trained for over 20 hours to play Rise of Nations, a complex real-time strategy game. These adults showed substantial improvements over the training period in game performance. MRI scans obtained prior to training revealed that the volume of a number of brain regions, which have been previously associated with subsets of the trained skills, predicted a substantial amount of variance in learning on the complex game. Thus, regional differences in brain volume can predict learning in complex tasks that entail the use of a variety of perceptual, cognitive and motor processes. PMID:21546146

Regional differences in brain volume predict the acquisition of skill in a complex real-time strategy videogame.

PubMed

Basak, Chandramallika; Voss, Michelle W; Erickson, Kirk I; Boot, Walter R; Kramer, Arthur F

2011-08-01

Previous studies have found that differences in brain volume among older adults predict performance in laboratory tasks of executive control, memory, and motor learning. In the present study we asked whether regional differences in brain volume as assessed by the application of a voxel-based morphometry technique on high resolution MRI would also be useful in predicting the acquisition of skill in complex tasks, such as strategy-based video games. Twenty older adults were trained for over 20 h to play Rise of Nations, a complex real-time strategy game. These adults showed substantial improvements over the training period in game performance. MRI scans obtained prior to training revealed that the volume of a number of brain regions, which have been previously associated with subsets of the trained skills, predicted a substantial amount of variance in learning on the complex game. Thus, regional differences in brain volume can predict learning in complex tasks that entail the use of a variety of perceptual, cognitive and motor processes. Copyright © 2011 Elsevier Inc. All rights reserved.

Teaching Technical Skills through Play.

ERIC Educational Resources Information Center

Gullion, Laurie

The value of light-hearted play in teaching technical recreational sport skills is immense. Children as well as adults can learn more quickly and completely with a games-oriented approach. Often without realizing the hidden goal of excellent skiing or paddling, participants respond to intriguing tasks in a game, immerse themselves in good…

Cluster: Drafting. Course: Introduction to Technical Drafting.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of 10 units is designed for use with an instructor as an introduction to technical drafting, and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: drafting…

Technical Adequacy of Early Numeracy Curriculum-Based Measurement in Kindergarten

ERIC Educational Resources Information Center

Martinez, Rebecca S.; Missall, Kristen N.; Graney, Suzanne Bamonto; Aricak, O. Tolga; Clarke, Ben

2009-01-01

The current study examines the technical adequacy of four Early Numeracy Curriculum-Based Measurement (EN-CBM) screening tasks: "Oral Counting" (OC), "Number Identification" (NI), "Quantity Discrimination" (QD), and "Missing Number" (MN). Results from 59 kindergarten students assessed in the fall and spring reveal moderate to high test-retest and…

Goddard Geophysical and Astronomical Observatory

NASA Technical Reports Server (NTRS)

Redmond, Jay; Kodak, Charles

2001-01-01

This report summarizes the technical parameters and the technical staff of the Very Long Base Interferometry (VLBI) system at the fundamental station Goddard Geophysical and Astronomical Observatory (GGAO). It also gives an overview about the VLBI activities during the previous year. The outlook lists the outstanding tasks to improve the performance of GGAO.

Cognitive Processes Embedded in Self-Explanations of Solving Technical Problems: Implications for Training

ERIC Educational Resources Information Center

Maughan, George R.

2007-01-01

This qualitative research examines the cognitive processes embedded in self-explanations of automobile and motorcycle service technicians performing troubleshooting tasks and solving technical problems. In-depth interviews were conducted with twelve service technicians who have obtained the designation of "master technician" or equivalent within…

Research in Automatic Russian-English Scientific and Technical Lexicography. Final Report.

ERIC Educational Resources Information Center

Wayne State Univ., Detroit, MI.

Techniques of reversing English-Russian scientific and technical dictionaries into Russian-English versions through semi-automated compilation are described. Sections on manual and automatic processing discuss pre- and post-editing, the task program, updater (correction of errors and revision by specialist in a given field), the system employed…

Interdisciplinary Instructional Reading Strategies: An Applied Application for Business Education

ERIC Educational Resources Information Center

Polkinghorne, Frederick W.; Bland, Zinna L.

2011-01-01

The contemporary workforce requires technical and reading skills (Shanahan & Shanahan, 2008; The Conference Board, Corporate Voices for Working Families, Partnership for 21st Century Skills, Society of Human Resource Management, 2006). Technical skills allow workers to perform specific workforce tasks, while reading skills are generally needed by…

A Curriculum Activities Guide to Water Pollution and Environmental Studies, Volume II - Appendices.

ERIC Educational Resources Information Center

Hershey, John T., Ed.; And Others

This publication, Volume II of a two volume set of water pollution studies, contains seven appendices which support the studies. Appendix 1, Water Quality Parameters, consolidates the technical aspects of water quality including chemical, biological, computer program, and equipment information. Appendix 2, Implementation, outlines techniques…

The second iteration of the Systems Prioritization Method: A systems prioritization and decision-aiding tool for the Waste Isolation Pilot Plant: Volume 2, Summary of technical input and model implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Prindle, N.H.; Mendenhall, F.T.; Trauth, K.

1996-05-01

The Systems Prioritization Method (SPM) is a decision-aiding tool developed by Sandia National Laboratories (SNL). SPM provides an analytical basis for supporting programmatic decisions for the Waste Isolation Pilot Plant (WIPP) to meet selected portions of the applicable US EPA long-term performance regulations. The first iteration of SPM (SPM-1), the prototype for SPM< was completed in 1994. It served as a benchmark and a test bed for developing the tools needed for the second iteration of SPM (SPM-2). SPM-2, completed in 1995, is intended for programmatic decision making. This is Volume II of the three-volume final report of the secondmore » iteration of the SPM. It describes the technical input and model implementation for SPM-2, and presents the SPM-2 technical baseline and the activities, activity outcomes, outcome probabilities, and the input parameters for SPM-2 analysis.« less

SeaWiFS Postlaunch Technical Report Series Cumulative Index

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor)

2001-01-01

The Sea-viewing Wide Field-of-view Sensor (SeaWiFS) is the follow-on ocean color instrument to the Coastal Zone Color Scanner (CZCS), which ceased operations in 1986, after an eight-year mission. SeaWiFS was launched on 1 August 1997, onboard the OrbView-2 satellite, built by Orbital Sciences Corporation (OSC). The SeaWiFS Project at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), undertook the responsibility of documenting all aspects of this mission, which is critical to the ocean color and marine science communities. The start of this documentation was titled the SeaWiFS Technical Report Series, which ended after 43 volumes were published. A follow-on series was started, titled the SeaWiFS Postlaunch Technical Report Series. This particular volume of the so-called "Postlaunch Series" serves as a reference, or guidebook, to the previous 11 volumes and consists of 5 sections including an errata, an addendum, an index to key words and phrases, a list of acronyms used, and a list of all references cited. The editors will publish a cumulative index of this type after every five volumes.

Structural and functional changes of the cingulate gyrus following traumatic brain injury: relation to attention and executive skills.

PubMed

Merkley, Tricia L; Larson, Michael J; Bigler, Erin D; Good, Daniel A; Perlstein, William M

2013-09-01

Impairments of attention and executive functions are common sequelae of traumatic brain injury (TBI). The anterior cingulate is implicated in conflict-related task performance, such as the Stroop, and is susceptible to TBI-related injury due to its frontal location and proximity to the rough surface of the falx cerebri. We investigated the relationship between cingulate cortex volume and performance on tasks of selective attention and cognitive flexibility (single-trial Stroop and Auditory Consonant Trigrams [ACT]). Participants consisted of 12 adults with severe TBI and 18 controls. T1-weighted volumetric MRI data were analyzed using automated cortical reconstruction, segmentation, parcellation, and volume measurement. Cortical volume reductions were prominent bilaterally in frontal, temporal, and inferior parietal regions.Specific regional reduction of the cingulate cortex was observed only for cortical volume of right caudal anterior cingulate(cACC). The TBI group performed significantly worse than control participants on the Stroop and ACT tasks. Findings suggest that atrophy of the right cACC may contribute to reduced performance on executive function tasks, such as the Stroop and ACT, although this is likely but one node of an extensive brain network involved in these cognitive processes.

Relationships between regional cerebellar volume and sensorimotor and cognitive function in young and older adults

PubMed Central

Bernard, Jessica A.; Seidler, Rachael D.

2013-01-01

The cerebellum has been implicated in both sensorimotor and cognitive function, but is known to undergo volumetric declines with advanced age. Individual differences in regional cerebellar volume may therefore provide insight into performance variability across the lifespan, as has been shown with other brain structures and behaviors. Here, we investigated whether there are regional age differences in cerebellar volume in young and older adults, and whether these volumes explain, in part, individual differences in sensorimotor and cognitive task performance. We found that older adults had smaller cerebellar volume than young adults; specifically, lobules in the anterior cerebellum were more impacted by age. Multiple regression analyses for both age groups revealed associations between sensorimotor task performance in several domains (balance, choice reaction time, and timing) and regional cerebellar volume. There were also relationships with working memory, but none with measures of general cognitive or executive function. Follow-up analyses revealed several differential relationships with age between regional volume and sensorimotor performance. These relationships were predominantly selective to cerebellar regions that have been implicated in cognitive functions. Therefore, it may be the cognitive aspects of sensorimotor task performance that are best explained by individual differences in regional cerebellar volumes. In sum, our results demonstrate the importance of regional cerebellar volume with respect to both sensorimotor and cognitive performance, and we provide additional insight into the role of the cerebellum in age-related performance declines. PMID:23625382

Research and development of a heat-pump water heater. Volume 2. R and D task reports

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunning, R.L.; Amthor, F.R.; Doyle, E.J.

1978-08-01

The heat pump water heater is a device that works much like a window air conditioner except that heat from the home is pumped into a water tank rather than to the outdoors. The objective established for the device is to operate with a Coefficient of Performance (COP) of 3 or, an input of one unit of electric energy would create three units of heat energy in the form of hot water. With such a COP, the device would use only one-third the energy and at one-third the cost of a standard resistance water heater. This Volume 2 contains themore » final reports of the three major tasks performed in Phase I. In Task 2, a market study identifies the future market and selects an initial target market and channel of distribution, all based on an analysis of the parameters affecting feasibility of the device and the factors that will affect its market acceptance. In the Task 3 report, the results of a design and test program to arrive at final designs of heat pumps for both new water heaters and for retrofitting existing water heaters are presented. In the Task 4 report, a plan for an extensive field demonstration involving use in actual homes is presented. Volume 1 contains a final summary report of the information in Volume 2.« less

Project FARE task III report : urban mass transportation industry reporting system design : interim task III report for November 1972-June 1973 period. Part I - Task summary.

DOT National Transportation Integrated Search

1973-06-01

This report contains a description of the proposed uniform reporting system for the urban mass transit industry. It is presented in four volumes: Part I - Task Summary contains a description of how Task III was accomplished and the conclusions and re...

Responsive copolymers for enhanced petroleum recovery. Quarterly technical progress report, June 23--September 21, 1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, C.; Hester, R.

Summaries are given on the technical progress on three tasks of this project. Monomer and polymer synthesis discusses the preparation of 1(7-aminoheptyloxymethyl)naphthalene and poly(maleic anhydride-alt-ethyl vinyl ether). Task 2, Characterization of molecular structure, discusses terpolymer solution preparation, UV analysis, fluorescence analysis, low angle laser light scattering, and viscometry. The paper discusses the effects of hydrophobic groups, the effect of pH, the effect of electrolyte addition, and photophysical studies. Task 3, Solution properties, describes the factorial experimental design for characterizing polymer solutions by light scattering, the light scattering test model, orthogonal factorial test design, linear regression in coded space, confidence levelmore » for coded space test mode coefficients, coefficients of the real space test model, and surface analysis of the model equations.« less

Technical Facilities Management, Loan Pool, and Calibration

NASA Technical Reports Server (NTRS)

Smith, Jacob

2011-01-01

My work at JPL for the SURF program began on June 11, 2012 with the Technical Facilities Management group (TFM). As well as TFM, I worked with Loan Pool and Metrology to help them out with various tasks. Unlike a lot of other interns, I did not have a specific project rather many different tasks to be completed over the course of the 10 weeks.The first task to be completed was to sort through old certification reports in 6 different boxes to locate reports that needed to be archived into a digital database. There were no reports within these boxes that needed to be archived but rather were to be shredded. The reports went back to the early 1980's and up to the early 2000's. I was looking for reports dated from 2002 to 2012

Combined Global Navigation Satellite Systems in the Space Service Volume

NASA Technical Reports Server (NTRS)

Force, Dale A.; Miller, James J.

2015-01-01

Besides providing position, navigation, and timing (PNT) services to traditional terrestrial and airborne users, GPS is also being increasingly used as a tool to enable precision orbit determination, precise time synchronization, real-time spacecraft navigation, and three-axis attitude control of Earth orbiting satellites. With additional Global Navigation Satellite System (GNSS) constellations being replenished and coming into service (GLONASS, Beidou, and Galileo), it will become possible to benefit from greater signal availability and robustness by using evolving multi-constellation receivers. The paper, "GPS in the Space Service Volume," presented at the ION GNSS 19th International Technical Meeting in 2006 (Ref. 1), defined the Space Service Volume, and analyzed the performance of GPS out to seventy thousand kilometers. This paper will report a similar analysis of the signal coverage of GPS in the space domain; however, the analyses will also consider signal coverage from each of the additional GNSS constellations noted earlier to specifically demonstrate the expected benefits to be derived from using GPS in conjunction with other foreign systems. The Space Service Volume is formally defined as the volume of space between three thousand kilometers altitude and geosynchronous altitude circa 36,000 km, as compared with the Terrestrial Service Volume between 3,000 km and the surface of the Earth. In the Terrestrial Service Volume, GNSS performance is the same as on or near the Earth's surface due to satellite vehicle availability and geometry similarities. The core GPS system has thereby established signal requirements for the Space Service Volume as part of technical Capability Development Documentation (CDD) that specifies system performance. Besides the technical discussion, we also present diplomatic efforts to extend the GPS Space Service Volume concept to other PNT service providers in an effort to assure that all space users will benefit from the enhanced interoperability of GNSS services in the space domain. A separate paper presented at the conference covers the individual GNSS performance parameters for respective Space Service Volumes.

DOT-105/111/112/114 Tank Cars Shell Cracking and Structural Integrity Assessment: Task Force Report

DOT National Transportation Integrated Search

1986-02-01

In August 1985, the FRA Associate Administrator for Safety asked the DOT Transportation Systems Center to make a preliminary technical assessment of the adequacy of the manufacturer's inspection and repair procedures. The Center formed a task force f...

USGS response to an urban earthquake, Northridge '94

USGS Publications Warehouse

Updike, Randall G.; Brown, William M.; Johnson, Margo L.; Omdahl, Eleanor M.; Powers, Philip S.; Rhea, Susan; Tarr, Arthur C.

1996-01-01

For the past 2 years, the USGS has rigorously pursued over 40 tasks focused on the USGS Northridge Earthquake Mission. This document is a summary report of the USGS findings; additional technical reports on specific USGS tasks are appearing in various scientific journals and USGS publications.

Aviation Technician Training I and Task Analyses: Semester II. Field Review Copy.

ERIC Educational Resources Information Center

Upchurch, Richard

This guide for aviation technician training begins with a course description, resource information, and a course outline. Tasks/competencies are categorized into 16 concept/duty areas: understanding technical symbols and abbreviations; understanding mathematical terms, symbols, and formulas; computing decimals; computing fractions; computing ratio…

The Design and Transfer of Advanced Command and Control (C2) Computer-Based Systems

DTIC Science & Technology

1980-03-31

TECHNICAL REPORT 80-02 QUARTERLY TECHNICAL REPORT: THE DESIGN AND TRANSFER OF ADVANCED COMMAND AND CONTROL (C 2 ) COMPUTER-BASED SYSTEMS ARPA...The Tasks/Objectives and/or Purposes of the overall project are connected with the design , development, demonstration and transfer of advanced...command and control (C2 ) computer-based systems; this report covers work in the computer-based design and transfer areas only. The Technical Problems thus

Proceedings: Computer Science and Data Systems Technical Symposium, volume 2

NASA Technical Reports Server (NTRS)

Larsen, Ronald L.; Wallgren, Kenneth

1985-01-01

Progress reports and technical updates of programs being performed by NASA centers are covered. Presentations in viewgraph form, along with abstracts, are included for topics in three catagories: computer science, data systems, and space station applications.

Strategic Control Algorithm Development : Volume 2A. Technical Report.

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are results of analyses that con...

Strategic Control Algorithm Development : Volume 2B. Technical Report (Concluded)

DOT National Transportation Integrated Search

1974-08-01

The technical report presents a detailed description of the strategic control functional objectives, followed by a presentation of the basic strategic control algorithm and how it evolved. Contained in this discussion are the results of analyses that...

Automated water monitor system field demonstration test report. Volume 2: Technical summary

NASA Technical Reports Server (NTRS)

Brooks, R. L.; Jeffers, E. L.; Perreira, J.; Poel, J. D.; Nibley, D.; Nuss, R. H.

1981-01-01

The NASA Automatic Water Monitor System was installed in a water reclamation facility to evaluate the technical and cost feasibility of producing high quality reclaimed water. Data gathered during this field demonstration test are reported.

Regulatory and technical reports (abstract index journal): Annual compilation for 1996, Volume 21, No. 4

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheehan, M.A.

1997-04-01

This compilation is the annual cumulation of bibliographic data and abstracts for the formal regulatory and technical reports issued by the U.S. Nuclear Regulatory Commission (NRC) Staff and its contractors.

Designing a proficiency-based, content validated virtual reality curriculum for laparoscopic colorectal surgery: a Delphi approach.

PubMed

Palter, Vanessa N; Graafland, Maurits; Schijven, Marlies P; Grantcharov, Teodor P

2012-03-01

Although task training on virtual reality (VR) simulators has been shown to transfer to the operating room, to date no VR curricula have been described for advanced laparoscopic procedures. The purpose of this study was to develop a proficiency-based VR technical skills curriculum for laparoscopic colorectal surgery. The Delphi method was used to determine expert consensus on which VR tasks (on the LapSim simulator) are relevant to teaching laparoscopic colorectal surgery. To accomplish this task, 19 international experts rated all the LapSim tasks on a Likert scale (1-5) with respect to the degree to which they thought that a particular task should be included in a final technical skills curriculum. Results of the survey were sent back to participants until consensus (Cronbach's α >0.8) was reached. A cross-sectional design was utilized to define the benchmark scores for the identified tasks. Nine expert surgeons completed all identified tasks on the "easy," "medium," and "hard" settings of the simulator. In the first round of the survey, Cronbach's α was 0.715; after the second round, consensus was reached at 0.865. Consensus was reached for 7 basic tasks and 1 advanced suturing task. Median expert time and economy of movement scores were defined as benchmarks for all curricular tasks. This study used Delphi consensus methodology to create a curriculum for an advanced laparoscopic procedure that is reflective of current clinical practice on an international level and conforms to current educational standards of proficiency-based training. Copyright © 2012 Mosby, Inc. All rights reserved.

Japanese professional nurses spend unnecessarily long time doing nursing assistants' tasks.

PubMed

Kudo, Yasushi; Yoshimura, Emiko; Shahzad, Machiko Taruzuka; Shibuya, Akitaka; Aizawa, Yoshiharu

2012-09-01

In environments in which professional nurses do simple tasks, e.g., laundry, cleaning, and waste disposal, they cannot concentrate on technical jobs by utilizing their expertise to its fullest benefit. Particularly, in Japan, the nursing shortage is a serious problem. If professional nurses take their time to do any of these simple tasks, the tasks should be preferentially allocated to nursing assistants. Because there has been no descriptive study to investigate the amount of time Japanese professional nurses spent doing such simple tasks during their working time, their actual conditions remain unclear. Professional nurses recorded their total working time and the time they spent doing such simple tasks during the week of the survey period. The time an individual respondent spent doing one or more simple tasks during that week was summed up, as was their working time. Subsequently, the percentage of the summed time he or she spent doing any of those tasks in his or her summed working time was calculated. A total of 1,086 respondents in 19 hospitals that had 87 to 376 beds were analyzed (response rate: 53.3%). The average time (SD) that respondents spent doing those simple tasks and their total working time were 2.24 (3.35) hours and 37.48 (10.88) hours, respectively. The average percentage (SD) of the time they spent doing the simple tasks in their working time was 6.00% (8.39). Hospital administrators must decrease this percentage. Proper working environments in which professional nurses can concentrate more on their technical jobs must be created.

Re-examining the effects of verbal instructional type on early stage motor learning.

PubMed

Bobrownicki, Ray; MacPherson, Alan C; Coleman, Simon G S; Collins, Dave; Sproule, John

2015-12-01

The present study investigated the differential effects of analogy and explicit instructions on early stage motor learning and movement in a modified high jump task. Participants were randomly assigned to one of three experimental conditions: analogy, explicit light (reduced informational load), or traditional explicit (large informational load). During the two-day learning phase, participants learned a novel high jump technique based on the 'scissors' style using the instructions for their respective conditions. For the single-day testing phase, participants completed both a retention test and task-relevant pressure test, the latter of which featured a rising high-jump-bar pressure manipulation. Although analogy learners demonstrated slightly more efficient technique and reported fewer technical rules on average, the differences between the conditions were not statistically significant. There were, however, significant differences in joint variability with respect to instructional type, as variability was lowest for the analogy condition during both the learning and testing phases, and as a function of block, as joint variability decreased for all conditions during the learning phase. Findings suggest that reducing the informational volume of explicit instructions may mitigate the deleterious effects on performance previously associated with explicit learning in the literature. Copyright © 2015 Elsevier B.V. All rights reserved.

Fort Irwin integrated resource assessment. Volume 3: Sitewide Energy Project identification for buildings and facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, J.M.; Dittmer, A.L.; Elliott, D.B.

1995-02-01

The U.S. Army Forces Command (FORSCOM) has tasked the U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP), supported by the Pacific Northwest Laboratory, to identify, evaluate, and assist in acquiring all cost-effective energy projects at Fort Irwin. This is part of a model program that PNL is designing to support energy-use decisions in the federal sector. This report provides the results of the fossil fuel and electric energy resource opportunity (ERO) assessments performed by PNL at the FORSCOM Fort Irwin facility located near Barstow, California. It is a companion report to Volume 1, Executive Summary, and Volume 2,more » Baseline Detail. The results of the analyses of EROs are presented in 16 common energy end-use categories (e.g., boilers and furnaces, service hot water, and building lighting). A narrative description of each ERO is provided, along with a table detailing information on the installed cost, energy and dollar savings; impacts on operations and maintenance (O&M); and, when applicable, a discussion of energy supply and demand, energy security, and environmental issues. A description of the evaluation methodologies and technical and cost assumptions is also provided for each ERO. Summary tables present the cost-effectiveness of energy end-use equipment before and after the implementation of each ERO and present the results of the life-cycle cost (LCC) analysis indicating the net present valve (NPV) and savings-to-investment ratio (SIR) of each ERO.« less

Potential for technically recoverable unconventional gas and oil resources in the Polish-Ukrainian Foredeep, Poland, 2012

USGS Publications Warehouse

Gautier, Donald L.; Pitman, Janet K.; Charpentier, Ronald R.; Cook, Troy; Klett, Timothy R.; Schenk, Christopher J.

2012-01-01

Using a performance-based geological assessment methodology, the U.S. Geological Survey estimated mean volumes of 1,345 billion cubic feet of potentially technically recoverable gas and 168 million barrels of technically recoverable oil and natural gas liquids in Ordovician and Silurian age shales in the Polish- Ukrainian Foredeep basin of Poland.

PANDA: A distributed multiprocessor operating system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chubb, P.

1989-01-01

PANDA is a design for a distributed multiprocessor and an operating system. PANDA is designed to allow easy expansion of both hardware and software. As such, the PANDA kernel provides only message passing and memory and process management. The other features needed for the system (device drivers, secondary storage management, etc.) are provided as replaceable user tasks. The thesis presents PANDA's design and implementation, both hardware and software. PANDA uses multiple 68010 processors sharing memory on a VME bus, each such node potentially connected to others via a high speed network. The machine is completely homogeneous: there are no differencesmore » between processors that are detectable by programs running on the machine. A single two-processor node has been constructed. Each processor contains memory management circuits designed to allow processors to share page tables safely. PANDA presents a programmers' model similar to the hardware model: a job is divided into multiple tasks, each having its own address space. Within each task, multiple processes share code and data. Tasks can send messages to each other, and set up virtual circuits between themselves. Peripheral devices such as disc drives are represented within PANDA by tasks. PANDA divides secondary storage into volumes, each volume being accessed by a volume access task, or VAT. All knowledge about the way that data is stored on a disc is kept in its volume's VAT. The design is such that PANDA should provide a useful testbed for file systems and device drivers, as these can be installed without recompiling PANDA itself, and without rebooting the machine.« less

Defense Information Systems Agency (DISA) GIG Convergence Master Plan 2012 (GCMP 2012). Volume 1

DTIC Science & Technology

2012-08-02

mapping, the complete DISA technical baseline, and the GIG Technical Guidance ( GTG ). The Department of Defense (DoD), as part of its IT Effectiveness...Guidance ( GTG ) to guide their development of service offerings, which are added to the technical baseline when approved by the CEP. 1.2. Background...corresponding hyperlinks; the complete set of GTPs is called the GIG Technical Guidance ( GTG ). These appendices also contain linkages between the GCMP

Ergonomic task reduction prevents bone osteopenia in a rat model of upper extremity overuse

PubMed Central

BARBE, Mary F.; JAIN, Nisha X.; MASSICOTTE, Vicky S.; POPOFF, Steven N.; BARR-GILLESPIE, Ann E.

2015-01-01

We evaluated the effectiveness of ergonomic workload reduction of switching rats from a high repetition high force (HRHF) lever pulling task to a reduced force and reach rate task for preventing task-induced osteopenic changes in distal forelimb bones. Distal radius and ulna trabecular structure was examined in young adult rats performing one of three handle-pulling tasks for 12 wk: 1) HRHF, 2) low repetition low force (LRLF); or 3) HRHF for 4 wk and than LRLF thereafter (HRHF-to-LRLF). Results were compared to age-matched controls rats. Distal forelimb bones of 12-wk HRHF rats showed increased trabecular resorption and decreased volume, as control rats. HRHF-to-LRLF rats had similar trabecular bone quality as control rats; and decreased bone resorption (decreased trabecular bone volume and serum CTX1), increased bone formation (increased mineral apposition, bone formation rate, and serum osteocalcin), and decreased osteoclasts and inflammatory cytokines, than HRHF rats. Thus, an ergonomic intervention of HRHF-to-LRLF prevented loss of trabecular bone volume occurring with prolonged performance of a repetitive upper extremity task. These findings support the idea of reduced workload as an effective approach to management of work-related musculoskeletal disorders, and begin to define reach rate and load level boundaries for such interventions. PMID:25739896

Aerobic fitness relates to learning on a virtual Morris Water Task and hippocampal volume in adolescents.

PubMed

Herting, Megan M; Nagel, Bonnie J

2012-08-01

In rodents, exercise increases hippocampal neurogenesis and allows for better learning and memory performance on water maze tasks. While exercise has also been shown to be beneficial for the brain and behavior in humans, no study has examined how exercise impacts spatial learning using a directly translational water maze task, or if these relationships exist during adolescence--a developmental period which the animal literature has shown to be especially vulnerable to exercise effects. In this study, we investigated the influence of aerobic fitness on hippocampal size and subsequent learning and memory, including visuospatial memory using a human analogue of the Morris Water Task, in 34 adolescents. Results showed that higher aerobic fitness predicted better learning on the virtual Morris Water Task and larger hippocampal volumes. No relationship between virtual Morris Water Task memory recall and aerobic fitness was detected. Aerobic fitness, however, did not relate to global brain volume or verbal learning, which might suggest some specificity of the influence of aerobic fitness on the adolescent brain. This study provides a direct translational approach to the existing animal literature on exercise, as well as adds to the sparse research that exists on how aerobic exercise impacts the developing human brain and memory. Published by Elsevier B.V.

Aerobic fitness relates to learning on a virtual morris water task and hippocampal volume in adolescents

PubMed Central

Herting, Megan M.; Nagel, Bonnie J.

2012-01-01

In rodents, exercise increases hippocampal neurogenesis and allows for better learning and memory performance on water maze tasks. While exercise has also been shown to be beneficial for the brain and behavior in humans, no study has examined how exercise impacts spatial learning using a directly translational water maze task, or if these relationships exist during adolescence – a developmental period which the animal literature has shown to be especially vulnerable to exercise effects. In this study, we investigated the influence of aerobic fitness on hippocampal size and subsequent learning and memory, including visuospatial memory using a human analogue of the Morris Water Task, in 34 adolescents. Results showed that higher aerobic fitness predicted better learning on the virtual Morris Water Task and larger hippocampal volumes. No relationship between virtual Morris Water Task memory recall and aerobic fitness was detected. Aerobic fitness, however, did not relate to global brain volume, or verbal learning, which might suggest some specificity of the influence of aerobic fitness on the adolescent brain. This study provides a direct translational approach to the existing animal literature on exercise, as well as adds to the sparse research that exists on how aerobic exercise impacts the developing human brain and memory. PMID:22610054

Brain structure, executive function and appetitive traits in adolescent obesity.

PubMed

de Groot, C J; van den Akker, E L T; Rings, E H H M; Delemarre-van de Waal, H A; van der Grond, J

2017-08-01

Children with obesity show differences in brain structure, executive function and appetitive traits when compared with lean peers. Little is known on the relationship between brain structure and these traits. To investigate the relationship between differences in brain structure and executive function and appetitive traits, in obese and lean adolescents. MRI was used to measure cortical thickness and subcortical volumes. Executive function was measured by a Stop Signal-and a Choice Delay Task. Appetitive traits were measured using the Child Eating Behaviour Questionnaire. Adolescents with obesity had greater volumes of the pallidum; 1.78 mL (SE 0.03, p=0.014), when compared with controls; 1.65 mL (SE 0.02). In the group with obesity, greater pallidum volume was positively associated with the ability to delay reward in the Choice Delay Task (p=0.012). The association between pallidum volumes and Choice Delay Task in obese adolescents supports the hypothesis that the pallidum plays an important role in executive dysfunction in obese children. © 2016 World Obesity Federation.

How Expert Pilots Think Cognitive Processes in Expert Decision Making

DTIC Science & Technology

1993-02-01

Management (CRM) This document is available to the public Advanced Qualification Program (AQP) through the National Technical Information Cognitive Task Analysis (CTA...8217 Selecting realistic EDM scenarios with critical events and performing a cognitive task analysis of novice vs. expert decision making for these events...scenarios with critical events and performing a cognitive task analysis of novice vs. expert decision making for these events is a basic requirement for

Financial Management Regulation. Volume 1. General Financial Management Information, Systems, and Requirements

DTIC Science & Technology

1993-05-01

20301-1100 DoD Components will be provided copies of this Volume of the Regulation through normal publication channels. Other Federal Agencies and the... public may obtain copies of this Volume from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161, (703) 487- 4650...SECTION 1 PARAGRAPH 1 SUtHI’ARAGRAIlTS ii DoD Financial Management Regulation Volume 1, Introductionp PUBLICATIONS SUPERSEDED This Volume of the

Robotic technology results in faster and more robust surgical skill acquisition than traditional laparoscopy.

PubMed

Moore, Lee J; Wilson, Mark R; Waine, Elizabeth; Masters, Rich S W; McGrath, John S; Vine, Samuel J

2015-03-01

Technical surgical skills are said to be acquired quicker on a robotic rather than laparoscopic platform. However, research examining this proposition is scarce. Thus, this study aimed to compare the performance and learning curves of novices acquiring skills using a robotic or laparoscopic system, and to examine if any learning advantages were maintained over time and transferred to more difficult and stressful tasks. Forty novice participants were randomly assigned to either a robotic- or laparoscopic-trained group. Following one baseline trial on a ball pick-and-drop task, participants performed 50 learning trials. Participants then completed an immediate retention trial and a transfer trial on a two-instrument rope-threading task. One month later, participants performed a delayed retention trial and a stressful multi-tasking trial. The results revealed that the robotic-trained group completed the ball pick-and-drop task more quickly and accurately than the laparoscopic-trained group across baseline, immediate retention, and delayed retention trials. Furthermore, the robotic-trained group displayed a shorter learning curve for accuracy. The robotic-trained group also performed the more complex rope-threading and stressful multi-tasking transfer trials better. Finally, in the multi-tasking trial, the robotic-trained group made fewer tone counting errors. The results highlight the benefits of using robotic technology for the acquisition of technical surgical skills.

Experimental evaluation and design of unfilled and concrete-filled FRP composite piles : Task 4B : material & construction specifications : final report.

DOT National Transportation Integrated Search

2015-07-01

The overall goal of this project is the experimental evaluation and design of unfilled and concrete-filled FRP composite piles for load-bearing in bridges. This report covers Task 4B, Materials and Construction Specifications. : This technical report...

78 FR 21573 - Airworthiness Directives; Bombardier, Inc. Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-11

.... For service information identified in this proposed AD, contact Bombardier, Inc., Q-Series Technical... following service information: de Havilland Dash 8 Series 100 Maintenance Task Card 531X1, Revision 25, in... Havilland Dash 8 Series 100 Maintenance Task Card 631X1, Revision 25, in Section 8, Electrical Wiring...

Identification of Tasks in Photo-Offset Lithography Occupations.

ERIC Educational Resources Information Center

Iowa State Dept. of Public Instruction, Des Moines. Div. of Career Education.

The research project was designed to provide data pertaining to performance tasks in specific occupations in various areas of vocational/technical education. The data presented in the document is intended to be used to develop appropriate objectives and curricular content to assist in the preparation of individuals entering the specific…

Environmental Research In Practice: Restoration And Protection Of Water Resources

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) is tasked to protect human health and the environment. To carry out this task, the EPA makes use of technical expertise within its Office of Research and Development. Restoration and protection of water resources is one area of tec...

Nursing Assistant. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. Based on a task list specific to the field, this curriculum guide provides the competencies needed by nursing assistants enrolled in postsecondary,…

Hanford Environmental Dose Reconstruction Project. Monthly report, December 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finch, S.M.; McMakin, A.H.

1991-12-31

The objective of the Hanford Environmental Dose Reconstruction Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The project is being managed and conducted by the Pacific Northwest Laboratory (PNL) under the direction of an independent Technical Steering Panel (TSP). The TSP consists of experts in environmental pathways, epidemiology, surface-water transport, ground-water transport, statistics, demography, agriculture, meteorology, nuclear engineering, radiation dosimetry, and cultural anthropology. Included are appointed technical members representing the states of Oregon and Washington, a representative of Native American tribes, and an individual representing the public.more » The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed, from release to impact on human (dose estimates): Source Terms; Environmental Transport; Environmental Monitoring Data; Demographics, Agriculture, Food Habits and; Environmental Pathways and Dose Estimates.« less

Hanford Environmental Dose Reconstruction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finch, S.M.; McMakin, A.H.

1991-01-01

The objective of the Hanford Environmental Dose Reconstruction Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The project is being managed and conducted by the Pacific Northwest Laboratory (PNL) under the direction of an independent Technical Steering Panel (TSP). The TSP consists of experts in environmental pathways, epidemiology, surface-water transport, ground-water transport, statistics, demography, agriculture, meteorology, nuclear engineering, radiation dosimetry, and cultural anthropology. Included are appointed technical members representing the states of Oregon and Washington, a representative of Native American tribes, and an individual representing the public.more » The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed, from release to impact on human (dose estimates): Source Terms; Environmental Transport; Environmental Monitoring Data; Demographics, Agriculture, Food Habits and; Environmental Pathways and Dose Estimates.« less

Do achievement goals mediate stereotype threat?: an investigation on females' soccer performance.

PubMed

Chalabaev, Aina; Sarrazinr, Philippe; Stone, Jeff; Cury, François

2008-04-01

This research investigated stereotype threat effects on women's performance in sports and examined the mediation of this effect by achievement goals. The influence of two stereotypes-relative to the poor athletic ability and the poor technical soccer ability of women-were studied. Fifty-one female soccer players were randomly assigned to one of three conditions, introducing the task as diagnostic of athletic ability, technical soccer ability, or sports psychology. Next, they filled out a questionnaire measuring achievement goals and performed a soccer dribbling task. Results showed that compared with the control condition, females' performance significantly decreased in the athletic ability condition and tended to decrease in the technical soccer ability condition. Moreover, participants endorsed a performance-avoidance (relative to performance-approach) goal when the stereotypes were activated. However, this goal endorsement was not related to performance. The implications of these results for understanding the role of stereotypes in gender inequalities in sports are discussed.

Customisation of an instrument to assess anaesthesiologists' non-technical skills.

PubMed

Jepsen, Rikke M H G; Spanager, Lene; Lyk-Jensen, Helle T; Dieckmann, Peter; Østergaard, Doris

2015-02-22

The objectives of the study were to identify Danish anaesthesiologists' non-technical skills and to customise the Scottish-developed Anaesthetists' Non-Technical Skills instrument for Danish anaesthesiologists. Six semi-structured group interviews were conducted with 31 operating room team members: anaes-thesiologists, nurse anaesthetists, surgeons, and scrub nurses. Interviews were transcribed verbatim and analysed using directed content analysis. Anaesthesiologists' non-technical skills were identified, coded, and sorted using the original instrument as a basis. The resulting prototype instrument was discussed with anaesthesiologists from 17 centres to ensure face validity. Interviews lasted 46-67 minutes. Identified examples of anaesthesiologists' good or poor non-technical skills fit the four categories in the original instrument: situation awareness; decision making; team working; and task management. Anaesthesiologists' leadership role in the operating room was emphasised: the original 'Task Management' category was named 'Leadership'. One new element, 'Demonstrating self-awareness' was added under the category 'Situation Awareness'. Compared with the original instrument, half of the behavioural markers were new, which reflected that being aware of and communicating one's own abilities to the team; working systematically; and speaking up to avoid adverse events were important skills. The Anaesthetists' Non-Technical Skills instrument was customised to a Danish setting using the identified non-technical skills for anaesthesiologists and the original instrument as basis. The customised instrument comprises four categories and 16 underpinning elements supported by multiple behavioural markers. Identifying non-technical skills through semi-structured group interviews and analysing them using direct content analysis proved a useful method for customising an assessment instrument to another setting.

Assessing Nurse Anaesthetists' Non-Technical Skills in the operating room.

PubMed

Lyk-Jensen, H T; Jepsen, R M H G; Spanager, L; Dieckmann, P; Østergaard, D

2014-08-01

Incident reporting and fieldwork in operating rooms have shown that some of the errors that arise in anaesthesia relate to inadequate use of non-technical skills. To provide a tool for training and feedback on nurse anaesthetists' non-technical skills, this study aimed to adapt the Anaesthetists' Non-Technical Skills (ANTS) as a behavioural marker system for the formative assessment of nurse anaesthetists' non-technical skills in the operating room. A qualitative approach with focus group interviews was used to identify the non-technical skills of nurse anaesthetists in the operating room. The interview data were transcribed verbatim. Directed content analysis was used to code and sort data deductively into the ANTS categories: task management, team working, situation awareness and decision making. The prototype named Nurse Anaesthetists' Non-Technical Skills (N-ANTS) was presented and discussed in a group of subject matter experts to ensure face validity. The N-ANTS system consists of the same four categories as ANTS and 15 underlying elements. Three to five good and poor behavioural markers for each element were identified. The headings and definitions of the categories and elements were adjusted to encompass the behavioural markers in N-ANTS. The differences that emerged mainly reflected statements regarding the establishment of role, competence, and task delegation. A behavioural marker system, N-ANTS, for nurse anaesthetists was adapted from a behavioural marker system, ANTS, for anaesthesiologists. © 2014 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Solid State Energy Conversion Alliance Delphi SOFC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Gary Blake; Sean Kelly

2006-12-31

The following report details the results under the DOE SECA program for the period July 2006 through December 2006. Developments pertain to the development of a 3 to 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. This report details technical results of the work performed under the following tasks for the SOFC Power System: Task 1 SOFC System Development; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant Components; Task 5 Project Management; and Task 6 System Modeling & Cell Evaluation for Highmore » Efficiency Coal-Based Solid Oxide Fuel Cell Gas Turbine Hybrid System.« less

Predictors of laparoscopic simulation performance among practicing obstetrician gynecologists.

PubMed

Mathews, Shyama; Brodman, Michael; D'Angelo, Debra; Chudnoff, Scott; McGovern, Peter; Kolev, Tamara; Bensinger, Giti; Mudiraj, Santosh; Nemes, Andreea; Feldman, David; Kischak, Patricia; Ascher-Walsh, Charles

2017-11-01

While simulation training has been established as an effective method for improving laparoscopic surgical performance in surgical residents, few studies have focused on its use for attending surgeons, particularly in obstetrics and gynecology. Surgical simulation may have a role in improving and maintaining proficiency in the operating room for practicing obstetrician gynecologists. We sought to determine if parameters of performance for validated laparoscopic virtual simulation tasks correlate with surgical volume and characteristics of practicing obstetricians and gynecologists. All gynecologists with laparoscopic privileges (n = 347) from 5 academic medical centers in New York City were required to complete a laparoscopic surgery simulation assessment. The physicians took a presimulation survey gathering physician self-reported characteristics and then performed 3 basic skills tasks (enforced peg transfer, lifting/grasping, and cutting) on the LapSim virtual reality laparoscopic simulator (Surgical Science Ltd, Gothenburg, Sweden). The association between simulation outcome scores (time, efficiency, and errors) and self-rated clinical skills measures (self-rated laparoscopic skill score or surgical volume category) were examined with regression models. The average number of laparoscopic procedures per month was a significant predictor of total time on all 3 tasks (P = .001 for peg transfer; P = .041 for lifting and grasping; P < .001 for cutting). Average monthly laparoscopic surgical volume was a significant predictor of 2 efficiency scores in peg transfer, and all 4 efficiency scores in cutting (P = .001 to P = .015). Surgical volume was a significant predictor of errors in lifting/grasping and cutting (P < .001 for both). Self-rated laparoscopic skill level was a significant predictor of total time in all 3 tasks (P < .0001 for peg transfer; P = .009 for lifting and grasping; P < .001 for cutting) and a significant predictor of nearly all efficiency scores and errors scores in all 3 tasks. In addition to total time, there was at least 1 other objective performance measure that significantly correlated with surgical volume for each of the 3 tasks. Higher-volume physicians and those with fellowship training were more confident in their laparoscopic skills. By determining simulation performance as it correlates to active physician practice, further studies may help assess skill and individualize training to maintain skill levels as case volumes fluctuate. Copyright © 2017 Elsevier Inc. All rights reserved.

Working Papers in Dialogue Modeling, Volume 2.

ERIC Educational Resources Information Center

Mann, William C.; And Others

The technical working papers that comprise the two volumes of this document are related to the problem of creating a valid process model of human communication in dialogue. In Volume 2, the first paper concerns study methodology, and raises such issues as the choice between system-building and process-building, and the advantages of studying cases…

Feasibility Study on Fully Automatic High Quality Translation: Volume II. Final Technical Report.

ERIC Educational Resources Information Center

Lehmann, Winifred P.; Stachowitz, Rolf

This second volume of a two-volume report on a fully automatic high quality translation (FAHQT) contains relevant papers contributed by specialists on the topic of machine translation. The papers presented here cover such topics as syntactical analysis in transformational grammar and in machine translation, lexical features in translation and…

Advanced transportation system studies technical area 2 (TA-2): Heavy lift launch vehicle development. volume 3; Program Cost estimates

NASA Technical Reports Server (NTRS)

McCurry, J. B.

1995-01-01

The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. The basic period of performance of the TA-2 contract was from May 1992 through May 1993. No-cost extensions were exercised on the contract from June 1993 through July 1995. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 3, provides a work breakdown structure dictionary, user's guide for the parametric life cycle cost estimation tool, and final report developed by ECON, Inc., under subcontract to Lockheed Martin on TA-2 for the analysis of heavy lift launch vehicle concepts.

Examining Co-Teaching through a Socio-Technical Systems Lens

ERIC Educational Resources Information Center

Isherwood, Robert S.; Barger-Anderson, Richard; Erickson, Matthew

2012-01-01

Qualitative research was conducted in a large suburban school district implementing co-teaching as a new service delivery model for special education. Researchers examined the changes that resulted from the new service delivery model using a socio-technical systems lens. This framework views schools as open systems that contain a structural, task,…

Technical Communication Competence and Projected Teacher Success.

ERIC Educational Resources Information Center

Powers, William G.; Lowry, David N.

Technical Communication Competence (TCC)is the competence involved in communicating mental images to others in such a manner as to result in their constructing comparable mental images, a process similar to the primary task demanded of teachers at all levels. In a study designed to discover the extent to which a positive relationship existed…

Drafting & Design Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

Cluster: Drafting. Course: Basic Technical Drafting. Research Project.

ERIC Educational Resources Information Center

Sanford - Lee County Schools, NC.

The set of six units is designed for use with an instructor in basic technical drafting and is also keyed to other texts. Each unit contains several task packages specifying prerequisites, rationale for learning, objectives, learning activities to be supervised by the instructor, and learning practice. The units cover: pictorial drawing; screw…

Interactive Methods of Teaching Physics at Technical Universities

ERIC Educational Resources Information Center

Krišták, L'uboš; Nemec, Miroslav; Danihelová, Zuzana

2014-01-01

The paper presents results of "non-traditional" teaching of the basic course of Physics in the first year of study at the Technical University in Zvolen, specifically teaching via interactive method enriched with problem tasks and experiments. This paper presents also research results of the use of the given method in conditions of…

Electronic Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in electronic technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

Autobody Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in autobody technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings and are used as…

Stay on or Drop Out? The Role of Identities in Continued Participation at Technical College in Australia

ERIC Educational Resources Information Center

Fisher, Laurel J.

2014-01-01

Identities extend standard models that explain student motivations to complete courses at technical college. A differential hypothesis was that profiles of identities (individuality, belonging and place) explain the self-concepts and task values that contribute to participation, considering demographic factors (age, gender, location, paid work).…

77 FR 4586 - Notice of Opportunity for Public Comment on the Proposed Models for Plant-Specific Adoption of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

... Comment on the Proposed Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler... on the proposed model safety evaluation (SE) for plant- specific adoption of Technical Specifications... System (ADAMS) under Accession Number ML103360003; the model application is available in ADAMS under...

Fundamentals of Dental Assisting. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in dental assisting, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used as…

Printing/Graphic Arts Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in printing and graphic arts technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry…

Applied Welding Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in applied welding technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are…

Automotive Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in automotive technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

76 FR 19510 - Notice of Availability (NOA) of the Models For Plant-Specific Adoption of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-07

...-Specific Adoption of Technical Specifications Task Force (TSTF) Traveler TSTF- 422, Revision 2, ``Change In... model safety evaluation (SE) for plant-specific adoption of TSTF Traveler TSTF-422, Revision 2, ``Change..., Revision 2, is available in the Agencywide Documents Access and Management System (ADAMS) under Accession...

Gender Equity in Trade and Technical Careers Curriculum.

ERIC Educational Resources Information Center

Vocational Curriculum Resource Center of Maine, Fairfield.

This curriculum guide contains task performance guides for eight duties to be taught to prospective and inservice trade and technical education teachers in Maine. The duties involve eliminating sex bias and sex discrimination in school, on the job, and in self-identification. The eight duties described in the guide are the following: eliminating…

Industrial Maintenance Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in industrial maintenance technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings,…

The Future of Amphibious Operations: Shaping the Expeditionary Strike Group to Fight in the Joint Task Force

DTIC Science & Technology

2010-02-01

1 Charles E. Wilhelm, Expeditionary Warfare.marine corps gazette, 79(6), 28-30. Retrieved October 15, 2009, from Career and Technical Education . (Document...Expeditionary warfare.marine corps gazette, 79(6), 28- 30. Retrieved October 15, 2009, from Career and Technical Education . (Document ID: 4455650

Precision Machining Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in precision machining technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

[Operation/Maintenance of Fiber Placement Machine

NASA Technical Reports Server (NTRS)

Pelham, L.; Dillard, T.

2000-01-01

NASA contract NAS8-39749 was completed in January 2000. The contract period of performance covered six (6) years and included basic program technical support as required by NASA with up to thirty (30) different technical directives identified and issued by NASA for specific Advanced Composite Technology tasks during the course of the contract.

Business Systems Specialist. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job as a business systems specialist, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

Hanford Environmental Dose Reconstruction Project Monthly Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finch, S.M.

1991-02-01

The objective of the Hanford Environmental Dose Reconstruction Project is to estimate the radiation doses that populations could have received from nuclear operations at Hanford since 1944. The project is being managed and conducted by the Pacific Northwest Laboratory (PNL) under the direction of an independent Technical Steering Panel (TSP). The TSP consists of experts in environmental pathways, epidemiology, surface-water transport, ground-water transport, statistics, demography, agriculture, meteorology, nuclear engineering, radiation dosimetry, and cultural anthropology. Included are appointed technical members representing the states of Oregon and Washington, cultural and technical experts nominated by the regional Native American tribes, and an individualmore » representing the public. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed, from release to impact on humans (dose estimates): source terms; environmental transport; environmental monitoring data; demographics, agriculture, food habits; and environmental pathways and dose estimates. Project reports and references used in the reports are made available to the public in a public reading room. Project progress is documented in this monthly report, which is available to the public. 3 figs., 3 tabs.« less

Nuclear Propulsion Technical Interchange Meeting, volume 1

NASA Technical Reports Server (NTRS)

1993-01-01

The Nuclear Propulsion Technical Interchange Meeting (NP-TIM-92) was sponsored and hosted by the Nuclear Propulsion Office at the NASA Lewis Research Center. The purpose of the meeting was to review the work performed in fiscal year 1992 in the areas of nuclear thermal and nuclear electric propulsion technology development. These proceedings are a compilation of the presentations given at the meeting (many of the papers are presented in outline or viewgraph form). Volume 1 covers the introductory presentations and the system concepts and technology developments related to nuclear thermal propulsion.

Solar thermal components. A bibliography with abstracts

NASA Technical Reports Server (NTRS)

Bozman, W. R. (Editor)

1979-01-01

This bibliographic series cites and abstracts literature and technical papers on components applied to solar thermal energy utilization. The quarterly volumes are divided into ten categories: material properties; flat plat collectors; concentrating collectors; thermal storage; heat pumps; coolers and heat exchangers; solar ponds and distillation; greenhouses; process pleat; and irrigation pumps. Each quarterly volume is compiled from a wide variety of data bases, report literature, technical briefs, journal articles and other traditional and non traditional sources. The Technology Application Center maintains a library containing many of the articles and publications referenced in the series.

Energy conservation policy evaluation. Study module IA. Volume II. Technical appendix. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bergstresser, K.; Berney, R.E.; Carter, L.F.

1978-01-01

This volume contains detailed technical analyses of the 19 energy conservation measures which were discussed as regional policy options in the report proper (PB-274 337). For each measure there is a description of how the measure works to reduce consumption; an assessment of potential savings, costs, and returns to adopters; probable 'normal' adoption rates under present policies; and potential adoption rates if some additional conservation policy options are implemented. Report includes chapters on environmental residuals from energy end uses, and policy preferences of households and energy marketers.

United States Air Force Research Initiation Program. 1985 Technical Report. Volume 2.

DTIC Science & Technology

1987-04-01

RESEARCH INITIATIO PORN 1985 TECHNICAL REPORT VOLUME 2(U) UNIVERSAL ENERGY SYSTEMS INC DAYTON OH R C DRRRAH APR 87 UNCLASSIFIED AFOSR-TR-87-1718 F492e-85-C...wi ves) may have to assume full responsibility for household chores and ’V child care during extended TVYs., and relinquish jobs to move with their...2 ’ Grjduate Degree 10% 5% At _east One Child iiiq ~Ho~.~ 9% 31% ,.IIlJ Livng at Hoyne 37% 56% Eployed Wives of Unemployed Wives of AF Oft icers (N=37

Privacy Protection through pseudonymisation in eHealth.

PubMed

De Meyer, F; De Moor, G; Reed-Fourquet, L

2008-01-01

The ISO TC215 WG4 pseudonymisation task group has produced in 2008 a first version of a technical specification for the application of pseudonymisation in Healthcare Informatics 0. This paper investigates the principles set out in the technical specification as well as its implications in eHealth. The technical specification starts out with a conceptual model and evolves from a theoretical model to a real life model by adding assumptions on the observability of personal data.

Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority Institutions Program.

DTIC Science & Technology

2000-04-01

AD Award Number: DAMD17-98-2-8012 TITLE: Technical Assistance and Program Support; DOD Historical Black Colleges and Universities and Minority...2000 3. REPORT TYPE AND DATES COVERED Annual (1 May 99 - 30 Apr 00): 4. TITLE AND SUBTITLE Technical Assistance and Program Support; DOD...UNCF’s Infrastructure Development Assistance Program (IDAP) has been involved myriad of tasks to support the Department of Defense’s interest to

Technology resource document for the assembled chemical weapons assessment environmental impact statement. Vol. 2 : assembled systems for weapons destruction at Anniston Army Depot.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kimmell, T.; Folga, S., Frey, G.; Molberg, J.

2001-05-04

This volume of the Technical Resource Document (TRD) for the ''Environmental Impact Statement (EIS) for the Design, Construction and Operation of One or More Pilot Test Facilities for Assembled Chemical Weapons Destruction Technologies at One or More Sites'' (PMACWA 2001g) pertains to the destruction of assembled chemical weapons (ACW) stored at Anniston Army Depot (ANAD), located outside Anniston, Alabama. This volume presents technical and process information on each of the destruction technologies applicable to treatment of the specific ACW stored at ANAD. The destruction technologies described are those that have been demonstrated as part of the Assembled Chemical Weapons Assessmentmore » (ACWA) selection process (see Volume 1).« less

Alternatives for Jet Engine Control. Volume 1: Modelling and Control Design with Jet Engine Data

NASA Technical Reports Server (NTRS)

Sain, M. K.

1985-01-01

This document compiles a comprehensive list of publications supported by, or related to, National Aeronautics and Space Administration Grant NSG-3048, entitled "Alternatives for Jet Engine Control". Dr. Kurt Seldner was the original Technical Officer for the grant, at Lewis Research Center. Dr. Bruce Lehtinen was the final Technical Officer. At the University of Notre Dame, Drs. Michael K. Sain and R. Jeffrey Leake were the original Project Directors, with Dr. Sain becoming the final Project Director. Publications cover work over a ten-year period. The Final Report is divided into two parts. Volume i, "Modelling and Control Design with Jet Engine Data", follows in this report. Volume 2, "Modelling and Control Design with Tensors", has been bound separately.

Marine safety manual, volume 4 : technical

DOT National Transportation Integrated Search

2005-01-01

A comprehensive manual which provides guidance on the application of Coast Guard regulations and explains the rationale behind their development is vital to the successful execution of the marine safety program. This volume is intended to serve that ...

FY 1996 Scientific and Technical Reports, Articles, Papers, and Presentations. Volume 1

NASA Technical Reports Server (NTRS)

Turner-Waits, Joyce E. (Compiler)

1996-01-01

This document presents formal NASA technical reports, papers published in technical journals, and presentations by MSFC personnel in FY96. It also includes papers of MSFC contractors. After being announced in STAR, all of the NASA series reports may be obtained from the National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22161. The information in this report may be of value to the scientific and engineering community in determining what information has been published and what is available.

Thin EFG octagons

NASA Astrophysics Data System (ADS)

Kalejs, J. P.

1994-03-01

This report describes work to advance the manufacturing line capabilities in crystal growth and laser cutting of Mobil Solar's unique edge-defined film-fed growth (EFG) octagon technology and to reduce the manufacturing costs of 10 cm x 10 cm polycrystalline silicon EFG wafers. The report summarizes the significant technical improvements in EFG technology achieved in the first 6 months of the PVMaT Phase 2 and the success in meeting program milestones. Technical results are reported for each of the three main pregrain areas: Task 5 -- Thin octagon growth (crystal growth) to reduce the thickness of the octagon to 200 microns; Task 6 -- Laser cutting-to improve the laser cutting process so as to produce wafers with decreased laser cutting damage at increased wafer throughput rates; and Task 7 -- Process control and product specification to implement advanced strategies in crystal growth process control and productivity designed to increase wafer yields.

System engineering techniques for establishing balanced design and performance guidelines for the advanced telerobotic testbed

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.; Matijevic, J. R.

1987-01-01

Novel system engineering techniques have been developed and applied to establishing structured design and performance objectives for the Telerobotics Testbed that reduce technical risk while still allowing the testbed to demonstrate an advancement in state-of-the-art robotic technologies. To estblish the appropriate tradeoff structure and balance of technology performance against technical risk, an analytical data base was developed which drew on: (1) automation/robot-technology availability projections, (2) typical or potential application mission task sets, (3) performance simulations, (4) project schedule constraints, and (5) project funding constraints. Design tradeoffs and configuration/performance iterations were conducted by comparing feasible technology/task set configurations against schedule/budget constraints as well as original program target technology objectives. The final system configuration, task set, and technology set reflected a balanced advancement in state-of-the-art robotic technologies, while meeting programmatic objectives and schedule/cost constraints.

Integral Engine Inlet Particle Separator. Volume 2. Design Guide

DTIC Science & Technology

1975-08-01

herein will be used in the design of integral inlet particle separators for future Army aircraft gas turbine engines . Apprupriate technical personnel...OF INTEGRAL GAS TURBINE ENGINE SOLID PARTICLE INLET SEPARATORS, PHASE I, FEASIBILITY STUDY AND DESIGN, Pratt and Whitney Aircraft ; USAAVLABS Technical...USAAVLABS Technical Report 70-36, U.S. Army Aviation Materiel Laboratories, Fort Eustis, Virginia, August 1970 AD 876 584. 13. ENGINES , AIRCRAFT

Focus: A Forum on Teaching and Learning in Utah Community and Technical Colleges, Volume II.

ERIC Educational Resources Information Center

Carpenter, Don A., Ed.

1983-01-01

A series of articles is presented on teaching and learning in Utah community and technical colleges. After an editorial comment by J. Marvin Higbee on the goals and purposes of the Utah Association of Community Colleges, V. Lowell Hansen discusses the role of the technical instructor in the information society of the 1980's. Next, Ace G.…

Going national with HERS and EEMs: Issues and impacts. The collected papers of the national collaborative

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

This collection of papers is a companion volume to A National Program for Energy-Efficient Mortgages and Home Energy Rating Systems: A Blueprint for Action (NREL/TP-261-4677). The Blueprint reports the findings and recommendations of the National Collaborative on Home Energy Rating Systems and Mortgage Incentives for Energy Efficiency about a voluntary national program linking energy-efficient mortgages and home energy rating systems. This volume provides technical documentation for A Blueprint for Action. It consists of 55 technical issue papers and 13 special papers prepared by the technical advisory committees and some members of the Collaborative Consensus Committee of the National Collaborative. Itmore » also contains the bibliography and the glossary written by the members and staff of the National Collaborative.« less

BDNF polymorphism predicts the rate of decline in skilled task performance and hippocampal volume in healthy individuals

PubMed Central

Sanchez, M Millan; Das, D; Taylor, J L; Noda, A; Yesavage, J A; Salehi, A

2011-01-01

Numerous studies have indicated a link between the presence of polymorphism in brain-derived neurotrophic factor (BDNF) and cognitive and affective disorders. However, only a few have studied these effects longitudinally along with structural changes in the brain. This study was carried out to investigate whether valine-to-methionine substitution at position 66 (val66met) of pro-BDNF could be linked to alterations in the rate of decline in skilled task performance and structural changes in hippocampal volume. Participants consisted of 144 healthy Caucasian pilots (aged 40–69 years) who completed a minimum of 3 consecutive annual visits. Standardized flight simulator score (SFSS) was measured as a reliable and quantifiable indicator for skilled task performance. In addition, a subset of these individuals was assessed for hippocampal volume alterations using magnetic resonance imaging. We found that val66met substitution in BDNF correlated longitudinally with the rate of decline in SFSS. Structurally, age-dependent hippocampal volume changes were also significantly altered by this substitution. Our study suggests that val66met polymorphism in BDNF can be linked to the rate of decline in skilled task performance. Furthermore, this polymorphism could be used as a predictor of the effects of age on the structure of the hippocampus in healthy individuals. Such results have implications for understanding possible disabilities in older adults performing skilled tasks who are at a higher risk for cognitive and affective disorders. PMID:22833197

On-board multispectral classification study. Volume 2: Supplementary tasks. [adaptive control

NASA Technical Reports Server (NTRS)

Ewalt, D.

1979-01-01

The operational tasks of the onboard multispectral classification study were defined. These tasks include: sensing characteristics for future space applications; information adaptive systems architectural approaches; data set selection criteria; and onboard functional requirements for interfacing with global positioning satellites.

Principles of Training in Marine Corps Task Analysis. Training Manual I. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 7.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.

This is the first in a series of five training manuals developed for use by the U.S. Marine Corps Office of Manpower Utilization (OMU) in its Task Analysis (TA) program. It is designed for trainers of OMU staff members assigned to the TA program, a research effort requiring interpersonal and research competence. Objectives of the manual are: (1)…

Understanding Skill in EVA Mass Handling. Volume 4; An Integrated Methodology for Evaluating Space Suit Mobility and Stability

NASA Technical Reports Server (NTRS)

McDonald, P. Vernon; Newman, Dava

1999-01-01

The empirical investigation of extravehicular activity (EVA) mass handling conducted on NASA's Precision Air-Bearing Floor led to a Phase I SBIR from JSC. The purpose of the SBIR was to design an innovative system for evaluating space suit mobility and stability in conditions that simulate EVA on the surface of the Moon or Mars. The approach we used to satisfy the Phase I objectives was based on a structured methodology for the development of human-systems technology. Accordingly the project was broken down into a number of tasks and subtasks. In sequence, the major tasks were: 1) Identify missions and tasks that will involve EVA and resulting mobility requirements in the near and long term; 2) Assess possible methods for evaluating mobility of space suits during field-based EVA tests; 3) Identify requirements for behavioral evaluation by interacting with NASA stakeholders;.4) Identify necessary and sufficient technology for implementation of a mobility evaluation system; and 5) Prioritize and select technology solutions. The work conducted in these tasks is described in this final volume of the series on EVA mass handling. While prior volumes in the series focus on novel data-analytic techniques, this volume addresses technology that is necessary for minimally intrusive data collection and near-real-time data analysis and display.

Real-world navigation in amnestic mild cognitive impairment: The relation to visuospatial memory and volume of hippocampal subregions.

PubMed

Peter, Jessica; Sandkamp, Richard; Minkova, Lora; Schumacher, Lena V; Kaller, Christoph P; Abdulkadir, Ahmed; Klöppel, Stefan

2018-01-31

Spatial disorientation is a frequent symptom in Alzheimer's disease and in mild cognitive impairment (MCI). In the clinical routine, spatial orientation is less often tested with real-world navigation but rather with 2D visuoconstructive tasks. However, reports about the association between the two types of tasks are sparse. Additionally, spatial disorientation has been linked to volume of the right hippocampus but it remains unclear whether right hippocampal subregions have differential involvement in real-world navigation. Yet, this would help uncover different functional roles of the subregions, which would have important implications for understanding the neuronal underpinnings of navigation skills. We compared patients with amnestic MCI (aMCI; n = 25) and healthy elderly controls (HC; n = 25) in a real-world navigation task that engaged different spatial processes. The association between real-world navigation and different visuoconstructive tasks was tested (i.e., figures from the Consortium to Establish a Registry for Alzheimer's Disease; CERAD, the Rey-Osterrieth Complex Figure task; and clock drawing). Furthermore, the relation between spatial navigation and volume of right hippocampal subregions was examined. Linear regression and relative weight analysis were applied for statistical analyses. Patients with aMCI were significantly less able to correctly navigate through a route compared to HC but had comparable map drawing and landmark recognition skills. The association between visuoconstructive tasks and real-world navigation was only significant when using the visuospatial memory component of the Rey figure. In aMCI, more volume of the right hippocampal tail was significantly associated with better navigation skills, while volume of the right CA2/3 region was a significant predictor in HC. Standard visuoconstructive tasks (e.g., the CERAD figures or clock drawing) are not sufficient to detect real-world spatial disabilities in aMCI. Consequently, more complex visuoconstructive tasks (i.e., the Rey figure) should be routinely included in the assessment of cognitive functions in the context of AD. Moreover, in those elderly individuals with impaired complex visuospatial memory, route finding behaviour should be evaluated in detail. Regarding the contribution of hippocampal subregions to spatial navigation, the right hippocampal tail seems to be particularly important for patients with aMCI, while the CA2/3 region appears to be more relevant in HC. Copyright © 2017 Elsevier Ltd. All rights reserved.

B-70 Aircraft Study. Volume 4

NASA Technical Reports Server (NTRS)

Taube, L. J.

1972-01-01

This volume contains cost, schedule, and technical information on the following B-70 aircraft subsystems: air induction system, flight control, personnel accommodation and escape, alighting and arresting, mission and traffic control, flight indication, test instrumentation, and installation, checkout, and pre-flight.

Renewable Enhanced Feedstocks for Advanced Biofuels and Bioproducts (REFABB)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peoples, Oliver; Snell, Kristi

The basic concept of the REFABB project was that by genetically engineering the biomass crop switchgrass to produce a natural polymer PHB, which is readily broken down by heating (thermolysis) into the chemical building block crotonic acid, sufficient additional economic value would be added for the grower and processor to make it an attractive business at small scale. Processes for using thermolysis to upgrade biomass to densified pellets (char) or bio-oil are well known and require low capital investment similar to a corn ethanol facility. Several smaller thermolysis plants would then supply the densified biomass, which is easier to handlemore » and transport to a centralized biorefinery where it would be used as the feedstock. Crotonic acid is not by itself a large volume commodity chemical, however, the project demonstrated that it can be used as a feedstock to produce a number of large volume chemicals including butanol which itself is a biofuel target. In effect the project would try to address three key technology barriers, feedstock logistics, feedstock supply and cost effective biomass conversion. This project adds to our understanding of the potential for future biomass biorefineries in two main areas. The first addressed in Task A was the importance and potential of developing an advanced value added biomass feedstock crop. In this Task several novel genetic engineering technologies were demonstrated for the first time. One important outcome was the identification of three novel genes which when re-introduced into the switchgrass plants had a remarkable impact on increasing the biomass yield based on dramatically increasing photosynthesis. These genes also turned out to be critical to increasing the levels of PHB in switchgrass by enabling the plants to fix carbon fast enough to support both plant growth and higher levels of the polymer. Challenges in the critical objective of Task B, demonstrating conversion of the PHB in biomass to crotonic acid at over 90% yield, demonstrated the need to consider up-front the limitations of trying to adopt existing equipment to a task for which subsequent basic research studies indicated it was not suitable. New information was developed in the most complex of the chemical conversions studied, advanced catalysis to make acrylic acid, a chemical used widely to make paints, and this was published in a scientific journal. In regard to the technical effectiveness, the crop science aspects were for the most part remarkably effective in addressing the underlying objectives indicating the soundness of the technical approach. With time, it should be possible to fully develop the advanced biomass biorefinery feedstock. Challenges within the thermolysis step to recover crotonic acid meant that by the end of the project we were not able to demonstrate an economic case based on data from scaled up equipment. Solving this will take further research and development work. As a general statement, the broadest public good is in demonstrating the value of funding a very unique approach to the complex problem of enabling large-scale biomass biorefineries which resulted in significant progress towards the ultimate goal and a clearer understanding of the technical hurdles remaining. Perhaps not surprisingly, some of the broader benefits to the public come from the use of the REFABB project innovations in areas unrelated to the initial objective. It is worth highlighting the breakthrough developments in identifying three single global regulator genes which can be engineered into plants to dramatically increase photosynthesis and carbon capturing ability. These genes have tremendous potential for use in major food crops, in particular corn to enhance grain yield and based on recent findings, increase the root density, a critical key to increasing carbon sequestration in agriculture and improving the sustainability of global food and biofuel production.« less

Technical Note: The determination of enclosed water volume in large flexible-wall mesocosms "KOSMOS"

NASA Astrophysics Data System (ADS)

Czerny, J.; Schulz, K. G.; Krug, S. A.; Ludwig, A.; Riebesell, U.

2013-03-01

The volume of water enclosed inside flexible-wall mesocosm bags is hard to estimate using geometrical calculations and can be strongly variable among bags of the same dimensions. Here we present a method for precise water volume determination in mesocosms using salinity as a tracer. Knowledge of the precise volume of water enclosed allows establishment of exactly planned treatment concentrations and calculation of elemental budgets.

Mammographic density estimation with automated volumetric breast density measurement.

PubMed

Ko, Su Yeon; Kim, Eun-Kyung; Kim, Min Jung; Moon, Hee Jung

2014-01-01

To compare automated volumetric breast density measurement (VBDM) with radiologists' evaluations based on the Breast Imaging Reporting and Data System (BI-RADS), and to identify the factors associated with technical failure of VBDM. In this study, 1129 women aged 19-82 years who underwent mammography from December 2011 to January 2012 were included. Breast density evaluations by radiologists based on BI-RADS and by VBDM (Volpara Version 1.5.1) were compared. The agreement in interpreting breast density between radiologists and VBDM was determined based on four density grades (D1, D2, D3, and D4) and a binary classification of fatty (D1-2) vs. dense (D3-4) breast using kappa statistics. The association between technical failure of VBDM and patient age, total breast volume, fibroglandular tissue volume, history of partial mastectomy, the frequency of mass > 3 cm, and breast density was analyzed. The agreement between breast density evaluations by radiologists and VBDM was fair (k value = 0.26) when the four density grades (D1/D2/D3/D4) were used and moderate (k value = 0.47) for the binary classification (D1-2/D3-4). Twenty-seven women (2.4%) showed failure of VBDM. Small total breast volume, history of partial mastectomy, and high breast density were significantly associated with technical failure of VBDM (p = 0.001 to 0.015). There is fair or moderate agreement in breast density evaluation between radiologists and VBDM. Technical failure of VBDM may be related to small total breast volume, a history of partial mastectomy, and high breast density.

Ares I-X Flight Data Evaluation: Executive Overview

NASA Technical Reports Server (NTRS)

Huebner, Lawrence D.; Waits, David A.; Lewis, Donny L.; Richards, James S.; Coates, R. H., Jr.; Cruit, Wendy D.; Bolte, Elizabeth J.; Bangham, Michal E.; Askins, Bruce R.; Trausch, Ann N.

2011-01-01

NASA's Constellation Program (CxP) successfully launched the Ares I-X flight test vehicle on October 28, 2009. The Ares I-X flight was a developmental flight test to demonstrate that this very large, long, and slender vehicle could be controlled successfully. The flight offered a unique opportunity for early engineering data to influence the design and development of the Ares I crew launch vehicle. As the primary customer for flight data from the Ares I-X mission, the Ares Projects Office (APO) established a set of 33 flight evaluation tasks to correlate flight results with prospective design assumptions and models. The flight evaluation tasks used Ares I-X data to partially validate tools and methodologies in technical disciplines that will ultimately influence the design and development of Ares I and future launch vehicles. Included within these tasks were direct comparisons of flight data with preflight predictions and post-flight assessments utilizing models and processes being applied to design and develop Ares I. The benefits of early development flight testing were made evident by results from these flight evaluation tasks. This overview provides summary information from assessment of the Ares I-X flight test data and represents a small subset of the detailed technical results. The Ares Projects Office published a 1,600-plus-page detailed technical report that documents the full set of results. This detailed report is subject to the International Traffic in Arms Regulations (ITAR) and is available in the Ares Projects Office archives files.

Technical Assistance in Evaluating Career Education Projects. Final Report. Volume I: Summary Volume.

ERIC Educational Resources Information Center

Stenner, A. Jackson; And Others

This document contains the first of five volumes reporting the activities and results of a career education evaluation project conducted to accomplish the following two objectives: (1) to improve the quality of evaluations by career education projects funded by the United States Office of Career Education (OCE) through the provision of technical…

Feasibility Study on Fully Automatic High Quality Translation: Volume I. Final Technical Report.

ERIC Educational Resources Information Center

Lehmann, Winifred P.; Stachowitz, Rolf

The object of this theoretical inquiry is to examine the controversial issue of a fully automatic high quality translation (FAHQT) in the light of past and projected advances in linguistic theory and hardware/software capability. This first volume of a two-volume report discusses the requirements of translation and aspects of human and machine…

Selecting Texts and Tasks for Content Area Reading and Learning

ERIC Educational Resources Information Center

Fisher, Douglas; Frey, Nancy

2015-01-01

For students to learn science, social studies, and technical subjects, their teachers have to engage them in meaningful lessons. As part of those lessons, students read informational texts. The selection of those texts is critical. Teachers can select texts worthy of attention and then align instruction and the post-reading tasks such that…

Operations mission planner

NASA Technical Reports Server (NTRS)

Biefeld, Eric; Cooper, Lynne

1990-01-01

The findings are documented of the OMP research task, which investigated the applicability of artificial intelligence (AI) technology in support of automated scheduling. The goals of the effort are summarized and the technical accomplishments are highlighted. The OMP task succeeded in identifying how AI technology could be applied and demonstrated an AI-based automated scheduling approach through the OMP prototypes.

Cognitive Task Analysis, Interface Design, and Technical Troubleshooting.

ERIC Educational Resources Information Center

Steinberg, Linda S.; Gitomer, Drew H.

A model of the interface design process is proposed that makes use of two interdependent levels of cognitive analysis: the study of the criterion task through an analysis of expert/novice differences and the evaluation of the working user interface design through the application of a practical interface analysis methodology (GOMS model). This dual…

SIMON: A Simple Instructional Monitor. Technical Report.

ERIC Educational Resources Information Center

Feurzeig, Wallace; And Others

An instructional monitor is a program which tries to detect, diagnose, and possibly help overcome a student's learning difficulties in the course of solving a problem or performing a task. In one approach to building an instructional monitor, the student uses a special task- or problem-oriented language expressly designed around some particular…

Georgia Tech Vertical Lift Research Center of Excellence

DTIC Science & Technology

2017-12-14

Technical Project Summaries Task 1.1 (GT-1): Next Generation VABS for More Realistic Modeling of Composite Blades ...Methodology for the Prediction of Rotor Blade Ice Formation and Shedding ..................................................................... 20...software disclosures and technology transfer efforts. Task 1.1 (GT-1): Next Generation VABS for More Realistic Modeling of Composite Blades PIs

Contracting AFSC 651X0, AFPT 90-651-862

DTIC Science & Technology

1991-10-01

CONTRACTING 78 TABLE 30 TECHNICAL TASKS NOT REFERENCED TO STS HIGH IN TRAINING EMPHASIS (TE) RATINGS TE TASKS RATING N1000 PREPARE DD FORMS 1784 5.08 M739 ...requirements with contractors or customers 89 M739 Compare contractor invoices with QAE reports 89 M731 Analyze adequacy of corrective actions to quality

Task Analysis: A Systematic Approach to Designing New Careers Programs.

ERIC Educational Resources Information Center

Jackson, Vivian C.

This guide presents the primary approaches, tools, and techniques utilized by the New Careers Training Laboratory (NCTL) staff to provide skills in training and to conduct agency task analyses. Much of the technical information has been taken from an earlier NCTL publication by Tita Beal, "A New Careers Guide for Career Development…

Computer-Based Simulations for Maintenance Training: Current ARI Research. Technical Report 544.

ERIC Educational Resources Information Center

Knerr, Bruce W.; And Others

Three research efforts that used computer-based simulations for maintenance training were in progress when this report was written: Game-Based Learning, which investigated the use of computer-based games to train electronics diagnostic skills; Human Performance in Fault Diagnosis Tasks, which evaluated the use of context-free tasks to train…

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

CALS Baseline Architecture Analysis of Weapons System. Technical Information: Army, Draft. Volume 8

DOT National Transportation Integrated Search

1989-09-01

This effort was performed to provide a common framework for analysis and planning of CALS initiatives across the military services, leading eventually to the development of a common DoD-wide architecture for CALS. This study addresses Army technical ...

Task Proficiency and L1 Private Speech

ERIC Educational Resources Information Center

Yamada, Minako

2005-01-01

There is a growing volume of research on task-based language use; however, the nature of "task proficiency" has not yet been clearly defined. In order to gain new insights, this study examines the relationship between the process of communication in an L2 and a task outcome by analysing lexical density, as obtained from the pattern of a…

A Note on the Factor Structure of Some Piagetian Tasks.

ERIC Educational Resources Information Center

Lawson, Anton E.; Nordland, Floyd H.

Some evidence supports the hypothesis that formal operational reasoning ability (at least that measured by Piagetian tasks) is a unified process. The purpose of this research was to determine: (1) if conservation tasks, such as conservation of number, liquid amount, weight and volume, are unifactor; and (2) if conservation tasks form a scale of…

ECLSS medical support activities

NASA Technical Reports Server (NTRS)

Crump, William J.; Kilgore, Melvin V., Jr.

1991-01-01

During the period from April 10, 1990 to April 9, 1991, the Consortium for the Space Life Sciences provided technical assistance to the NASA/MSFC water recovery efforts. This assistance was in the form of literature reviews, technical recommendations, and presentations. This final report summarizes the activities completed during this period and identifies those areas requiring additional efforts. The tasks which the University of Alabama in Huntsville (UAH) water recovery team addressed were either identified by MSFC technical representatives or chosen from those outlined in the subject statement of work.

Technical writing practically unified through industry

NASA Technical Reports Server (NTRS)

Houston, L. S.

1981-01-01

General background details in the development of a university level technical writing program, based upon the writing tasks of the student's occupations, are summarized. Objectives and methods for unifying the courses of study with the needs of industry are discussed. Four academic course divisions, Industries Technologies, in which preparation and training are offered are: Animal, Horticulture, Agriculture, and Agricultural Business. Occupational competence is cited as the main goal for these programs in which technical writing is to be practically unified through industry. Course descriptions are also provided.