Effects of Think-Aloud Pair Problem Solving on Secondary-Level Students' Performance in Career and Technical Education Courses

ERIC Educational Resources Information Center

Pate, Michael L.; Miller, Greg

2011-01-01

A randomized posttest-only control group experimental design was used to determine the effects of think-aloud pair problem solving (TAPPS) on the troubleshooting performance of 34 secondary-level career and technical education students. There was no significant difference in success rate between TAPPS students and students who worked alone…

Bibliography of Lewis Research Center technical publications announced in 1982

NASA Technical Reports Server (NTRS)

1983-01-01

The technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1982 is described. All the publications were announced in the 1982 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Maintenance Performance System. Guide for Individual Technical Training in Direct Support Units. Volume 1. Training Methodology

DTIC Science & Technology

1984-01-01

903-78-C-2007 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT NUMBERS Anacapa Sciences, Inc...of training responsibilities, and the most difficult job to perform . He is responsible for the work his section performs , as well as for training his...tasks. Relate these tasks to work done in your shop. Determine which tasks are performed frequently, rarely, and never. As you perform this review, make a

Key performance indicators for Australian mental health court liaison services.

PubMed

Davidson, Fiona; Heffernan, Ed; Greenberg, David; Butler, Tony; Burgess, Philip

2017-12-01

The aim of this paper is to describe the development and technical specifications of a framework and national key performance indicators (KPIs) for Australian mental health Court Liaison Services (CLSs) by the National Mental Health Court Liaison Performance Working Group (Working Group). Representatives from each Australian State and Territory were invited to form a Working Group. Through a series of national workshops and meetings, a framework and set of performance indicators were developed using a review of literature and expert opinion. A total of six KPIs for CLSs have been identified and a set of technical specifications have been formed. This paper describes the process and outcomes of a national collaboration to develop a framework and KPIs. The measures have been developed to support future benchmarking activities and to assist services to identify best practice in this area of mental health service delivery.

Final Report of Technical Assistance Provided to Guarantee Agencies with Recommendations for Further Improving Program Performance.

ERIC Educational Resources Information Center

Touche Ross and Co., Washington, DC.

Technical assistance provided to loan guarantee agencies by Touche Ross and Co. under contract to the U.S. Office of Education (OE) is described. Objectives of the report are: to summarize the work performed and the results of each of the projects that were conducted; to describe certain prototype systems that were developed for the guarantee…

The Effect of Soft Skills and Training Methodology on Employee Performance

ERIC Educational Resources Information Center

Ibrahim, Rosli; Boerhannoeddin, Ali; Bakare, Kazeem Kayode

2017-01-01

Purpose: The purpose of this paper is to investigate the effect of soft skill acquisition and the training methodology adopted on employee work performance. In this study, the authors study the trends of research in training and work performance in organisations that focus on the acquisition of technical or "hard skills" for employee…

Audit Report on "Work for Others Performed by the Department of Energy for the Department of Defense"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Pursuant to the Atomic Energy Act of 1954, as amended, and the Economy Act of 1932, the Department of Energy and its semi-autonomous National Nuclear Security Administration (NNSA) provide research and technical assistance to other Federal agencies on a reimbursable, full cost recovery basis through the Work for Others (WFO) program. For the vast majority of WFO technical projects, Department Federal officials furnish administrative project oversight while the actual detailed scientific or technical work is completed by the Department's 'management and operating' contractors. These contractors are awarded a special contract type specifically created under the Federal Acquisition Regulation to managemore » and operate Department sites and facilities, including sophisticated laboratories and technical centers, on a government-owned, contractor-operated basis. With annual expenditures exceeding $1 billion, the Department of Defense (DoD) is one of the Department's largest WFO customers. Work performed for DoD at the Department's national laboratories and other facilities includes highly technical research in areas such as nuclear weapons systems, counter-terrorism, and in-theater troop support. The National Defense Authorization Act for Fiscal Year (FY) 2009, required the Inspectors General of the DoD and the Department to review procurement methods to determine whether the Department complied with DoD procurement requirements and/or whether alternative procurement policies were in place. In response, we focused our review on projects performed by NNSA because it completes the vast majority (approximately $900 million in FY 2008) of the Department's work for DoD. As part of this effort, and, at the specific request of the DoD Office of Inspector General (DoD OIG), we identified the universe of WFO technical projects that received new funding in the fourth quarter of FY 2008 at NNSA sites. We independently reviewed a judgmental sample of 11 projects selected by the DoD OIG to meet the objectives of this audit. Our review revealed that NNSA managed DoD WFO technical projects in a manner consistent with requirements of the Atomic Energy Act of 1954, the Federal Acquisition Regulation, and the Department's implementing guidance, the Department of Energy Acquisition Regulation. Because of the very nature of the Department's management and operating contracting model, WFO projects may not be technically compliant with DoD procurement regulations in certain instances. We found that NNSA did not let new contracts or task orders for the DoD WFO technical projects we reviewed and instead managed them under its existing internal control process as part of its management and operating contract structure. In one instance, we noted that the Department had, at DoD's request, supplemented its control structure to incorporate specific DoD procurement requirements. Senior Department of Energy procurement officials acknowledged that neither the Department nor NNSA modified their existing prime contracts to incorporate specific defense procurement requirements because such modifications would be inappropriate, costly, and inefficient. In short, they informed us that the Department had developed and implemented a series of controls designed to monitor overall contractor performance, including WFO technical projects. Department and NNSA officials noted, however, that they were willing to incorporate DoD specific requirements into work orders should DoD request and fund such efforts. Additional details regarding management of WFO technical projects are discussed in the body of this report.« less

Bibliography of Lewis Research Center technical publications announced in 1992

NASA Technical Reports Server (NTRS)

1993-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1992. All the publications were announced in the 1992 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center Technical Publications announced in 1991

NASA Technical Reports Server (NTRS)

1992-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific engineering work performed and managed by the Lewis Research Center in 1991. All the publications were announced in the 1991 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1993

NASA Technical Reports Server (NTRS)

1994-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1993. All the publications were announced in the 1993 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1990

NASA Technical Reports Server (NTRS)

1991-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1990. All the publications were announced in the 1990 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1977

NASA Technical Reports Server (NTRS)

1978-01-01

This compilation of abstracts describes and indexes over 780 technical reports resulting from the scientific and engineering work performed and managed by the Lewis Research Center in 1977. All the publications were announced in the 1977 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Documents cited include research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1985

NASA Technical Reports Server (NTRS)

1986-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1985. All the publications were announced in the 1985 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1987

NASA Technical Reports Server (NTRS)

1988-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1987. All the publications were announced in the 1987 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1989

NASA Technical Reports Server (NTRS)

1990-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1989. All the publications were announced in the 1989 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1983

NASA Technical Reports Server (NTRS)

1984-01-01

This compilation of abstracts describes and indexes over 800 technical publications that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1983. Announced in the 1983 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts), the documents cited include research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1984

NASA Technical Reports Server (NTRS)

1985-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1984. All the publications were announced in the 1984 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Bibliography of Lewis Research Center technical publications announced in 1986

NASA Technical Reports Server (NTRS)

1987-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1986. All the publications were announced in the 1986 issues of Scientific and Technical Aerospace Reports (STAR) and/or International Aerospace Abstracts (IAA). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

Non-technical skills assessment in surgery.

PubMed

Sharma, Bharat; Mishra, Amit; Aggarwal, Rajesh; Grantcharov, Teodor P

2011-09-01

Adverse events in surgery have highlighted the importance of non-technical skills, such as communication, decision-making, teamwork, situational awareness and leadership, to effective organizational performance. These skills carry particular importance to surgical oncology, as members of a multidisciplinary team must work cohesively to formulate effective patient care plans. Several non-technical skills evaluation tools have been developed for use in surgery, without adequate comparison and consensus on which should be standard for training. Eleven articles describing the use of three non-technical evaluation tools related to surgery: NOTSS (Non Technical Skills for Surgeons), NOTECHS (Non Technical Skills) and OTAS (Observational Teamwork Assessment for Surgery) were analyzed with respect to scale formulation, validity, reliability and feasibility. Furthermore, their use in training thus far and the future of non-technical rating scales in surgical curricula was discussed. Future work should focus on incorporating these assessment tools into training and into a real operating room setting to provide formative evaluations for surgical residents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Can a senior house officer's time be used more effectively?

PubMed

Mitchell, J; Hayhurst, C; Robinson, S M

2004-09-01

To determine the amount of time senior house officers (SHO) spent performing tasks that could be delegated to a technician or administrative assistant and therefore to quantify the expected benefit that could be obtained by employing such physicians' assistants (PA). SHOs working in the emergency department were observed for one week by pre-clinical students who had been trained to code and time each task performed by SHOs. Activity was grouped into four categories (clinical, technical, administrative, and other). Those activities in the technical and administrative categories were those we believed could be performed by a PA. The SHOs worked 430 hours in total, of which only 25 hours were not coded due to lack of an observer. Of the 405 hours observed 86.2% of time was accounted for by the various codes. The process of taking a history and examining patients accounted for an average of 22% of coded time. Writing the patient's notes accounted for an average of 20% of coded time. Discussion with relatives and patients accounted for 4.7% of coded time and performing procedures accounted for 5.2% of coded time. On average across all shifts, 15% of coded time was spent doing either technical or administrative tasks. In this department an average of 15% of coded SHOs working time was spent performing administrative and technical tasks, rising to 17% of coded time during a night shift. This is equivalent to an average time of 78 minutes per 10 hour shift/SHO. Most tasks included in these categories could be performed by PAs thus potentially decreasing patient waiting times, improving risk management, allowing doctors to spend more time with their patients, and possibly improving doctors' training.

How a submarine returns to periscope depth: analysing complex socio-technical systems using Cognitive Work Analysis.

PubMed

Stanton, Neville A; Bessell, Kevin

2014-01-01

This paper presents the application of Cognitive Work Analysis to the description of the functions, situations, activities, decisions, strategies, and competencies of a Trafalgar class submarine when performing the function of returning to periscope depth. All five phases of Cognitive Work Analysis are presented, namely: Work Domain Analysis, Control Task Analysis, Strategies Analysis, Social Organisation and Cooperation Analysis, and Worker Competencies Analysis. Complex socio-technical systems are difficult to analyse but Cognitive Work Analysis offers an integrated way of analysing complex systems with the core of functional means-ends analysis underlying all of the other representations. The joined-up analysis offers a coherent framework for understanding how socio-technical systems work. Data were collected through observation and interviews at different sites across the UK. The resultant representations present a statement of how the work domain and current activities are configured in this complex socio-technical system. This is intended to provide a baseline, from which all future conceptions of the domain may be compared. The strength of the analysis is in the multiple representations from which the constraints acting on the work may be analysed. Future research needs to challenge the assumptions behind these constraints in order to develop new ways of working. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Technical skills rotation for general surgery residents.

PubMed

Gonzalez, Ray I; Martinez, Jose M; Iglesias, Alberto R; Lo Menzo, Emanuele; Hutson, Duane; Sleeman, Danny; Livingstone, Alan S; Madan, Atul K

2010-06-15

Technical skills are an important part of any general surgery residency curriculum. With the demands of limited work weeks, it is imperative that educators create novel methods of teaching technical skills to their residents. Our program utilizes a dedicated month to help accomplish this. This study hypothesized that general surgery residents would report a positive effect of a dedicated technical skills rotation. Residents who had undergone a 1 mo rotation in technical skills during their first year were asked to fill out a survey concerning their experience. During the 1-mo rotation, the residents had almost no clinical responsibilities. Teaching of technical skills was performed with various activities, including video content (VC), virtual reality simulators (VR), open foam procedures (OF), laparoscopic box trainers (BT), surgical equipment in-service (SE), and animate sessions (AS). Responses were given on a Likert scale (1-10) with higher numbers being more positive responses. There were seven residents in this study. The residents gave a very positive response to the overall rotation (9.4) and exposure to laparoscopic procedures (9.6). The other responses were enthusiastic as well: exposure to open procedures (8.9) and preparation for operative room (9.4). After their rotation, the residents were comfortable performing a laparoscopic cholecystectomy (9.2), a hand-sewn anastomosis (8.7), and a stapled anastomosis (9.4). The residents found theses activities helpful in increasing order: VC (7.8), VR (8.0), BT (9.0), ES (9.7), OF (9.8), and AS (9.8). A 1-mo dedicated technical skills rotations was perceived to be extremely positive by the residents. The residents felt very comfortable performing a laparoscopic cholecystectomy, a hand-sewn anastomosis, and a stapled anastomosis. With the 80-h work week, alternatives to learning technical skills in the operating room are essential. Further studies need to be performed to determine if this rotation aids in accomplishing this goal. Copyright 2010. Published by Elsevier Inc.

Carpentry. FasTrak Specialization Integrated Technical and Academic Competency (ITAC). 2001 Revision.

ERIC Educational Resources Information Center

Ohio State Board of Education, Columbus.

This Ohio Integrated Technical and Academic Competency (ITAC) profile provides the professional or occupational competencies deemed essential for a graduate to perform proficiently in carpentry when he or she graduates from the specialization work force development program in industrial and engineering systems. The profile includes competency…

Interdisciplinary Instructional Reading Strategies: An Applied Application for Business Education

ERIC Educational Resources Information Center

Polkinghorne, Frederick W.; Bland, Zinna L.

2011-01-01

The contemporary workforce requires technical and reading skills (Shanahan & Shanahan, 2008; The Conference Board, Corporate Voices for Working Families, Partnership for 21st Century Skills, Society of Human Resource Management, 2006). Technical skills allow workers to perform specific workforce tasks, while reading skills are generally needed by…

Research in network management techniques for tactical data communications networks

NASA Astrophysics Data System (ADS)

Boorstyn, R.; Kershenbaum, A.; Maglaris, B.; Sarachik, P.

1982-09-01

This is the final technical report for work performed on network management techniques for tactical data networks. It includes all technical papers that have been published during the control period. Research areas include Packet Network modelling, adaptive network routing, network design algorithms, network design techniques, and local area networks.

Entomology Specialist 1-1. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Jones, Jimmie L.

This individualized, self-paced course for training an entomology specialist was adapted from military curriculum materials for use in vocational and technical education. Completion of the course should provide students with basic information needed to accomplish the following duties of an entomology specialist: perform entomological work, apply…

The Technical Work Plan Tracking Tool

NASA Technical Reports Server (NTRS)

Chullen, Cinda; Leighton, Adele; Weller, Richard A.; Woodfill, Jared; Parkman, William E.; Ellis, Glenn L.; Wilson, Marilyn M.

2003-01-01

The Technical Work Plan Tracking Tool is a web-based application that enables interactive communication and approval of contract requirements that pertain to the administration of the Science, Engineering, Analysis, and Test (SEAT) contract at Johnson Space Center. The implementation of the application has (1) shortened the Technical Work Plan approval process, (2) facilitated writing and documenting requirements in a performance-based environment with associated surveillance plans, (3) simplified the contractor s estimate of the cost for the required work, and (4) allowed for the contractor to document how they plan to accomplish the work. The application is accessible to over 300 designated NASA and contractor employees via two Web sites. For each employee, the application regulates access according to the employee s authority to enter, view, and/or print out diverse information, including reports, work plans, purchase orders, and financial data. Advanced features of this application include on-line approval capability, automatic e-mail notifications requesting review by subsequent approvers, and security inside and outside the firewall.

Improvement of technical purpose materials performance characteristics with the radio frequency low pressure plasma

NASA Astrophysics Data System (ADS)

Makhotkina, L. Yu; Khristoliubova, V. I.

2017-11-01

The main aim of the work is to solve the actual problem of increasing the competitiveness of tanning products by reducing the prime cost and improving the quality of finished products due to the increased durability of the working elements of tanneries. The impact of the low pressure radio frequency (RF) plasma in the processes of treating for modification of the materials for special purposes is considered in the article. The results of working elements of tanneries and the materials for special purposes sample processing by a RF low pressure plasma are described. As a result of leather materials nano structuring and nano modifying physical, mechanical and hygienic characteristics were increased. Processing of the technical purpose materials allows to increase operational performance of products and extend their lifespan.

Publications of the Jet Propulsion Laboratory, January through December 1974. [deep space network, Apollo project, information theory, and space exploration

NASA Technical Reports Server (NTRS)

1975-01-01

Formalized technical reporting is described and indexed, which resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. The five classes of publications included are technical reports, technical memorandums, articles from the bimonthly Deep Space Network Progress Report, special publications, and articles published in the open literature. The publications are indexed by author, subject, and publication type and number.

Bibliography of Lewis Research Center technical publications announced in 1988

NASA Technical Reports Server (NTRS)

1989-01-01

This bibliography contains abstracts of the technical reports that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1988. Subject, author, and corporate source indexes are also included. All the publications were announced in the 1988 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

International Space Station (ISS) Expedite the Process of Experiments to Space Station (EXPRESS) Racks Software Support

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED 14), the MSFC EXPRESS Project Office (FD3 l), and the Huntsville Boeing Company. Work accomplishments included the support of SRB activities, ATB activities, ESCP activities, participating in technical meetings, coordinating issues between the Boeing Company and the MSFC Project Office, and performing special tasks as requested.

77 FR 66856 - Merchant Marine Personnel Advisory Committee: Intercessional Meeting AGENCY: Coast Guard, DHS

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-07

... Committee Working Group Meeting. SUMMARY: A working group of the Merchant Marine Personnel Advisory Committee (MERPAC) will meet to work on Task Statement 77 concerning the development of new performance...-Technical Ratings. This meeting will be open to the public. DATES: A MERPAC working group will meet on...

48 CFR 227.7105-2 - Acquisition of existing works without modification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... COPYRIGHTS Rights in Technical Data 227.7105-2 Acquisition of existing works without modification. (a) Use the clause at 252.227-7021, Rights in Data—Existing Works, in lieu of the clause at 252.227-7013... requires the right to reproduce, prepare derivative works, or publicly perform or display the existing...

Mariano Lake Mine: Technical Reports

EPA Pesticide Factsheets

This Final Removal Site Evaluation describes the objectives, work performed, and results of a Removal Site Evaluation (RSE) at the Mariano Lake Mine, which was performed by ARCADIS U.S., Inc. on behalf of Chevron Environmental Management Company.

Advancing Commercialization of Algal Biofuel through Increased Biomass Productivity and Technical Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anton, David

The proposed project built on the foundation of over several years years of intensive and ground-breaking R&D work at Cellana's Kona Demonstration Facility (KDF). Phycological and engineering solutions were provided to tackle key cultivation issues and technical barriers limiting algal biomass productivity identified through work conducted outdoors at industrial (1 acre) scale. The objectives of this project were to significantly improve algal biomass productivity and reduce operational cost in a seawater-based system, using results obtained from two top-performing algal strains as the baseline while technically advancing and more importantly, integrating the various unit operations involved in algal biomass production, processing,more » and refining.« less

Final Data Report: P- and S-Wave Velocity Logging Borings C4993, C4996, and C4997 Part A: Interval Logs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steller, Robert; Diehl, John

2007-02-01

Insitu borehole P- and S-wave velocity measurements were collected in three borings located within the Waste Treatment Plant (WTP) boundaries at the Hanford Site, southeastern Washington. Geophysical data acquisition was performed between August and October of 2006 by Rob Steller, Charles Carter, Antony Martin and John Diehl of GEOVision. Data analysis was performed by Rob Steller and John Diehl, and reviewed by Antony Martin of GEOVision, and report preparation was performed by John Diehl and reviewed by Rob Steller. The work was performed under subcontract with Battelle, Pacific Northwest Division with Marty Gardner as Battelle’s Technical Representative and Alan Rohaymore » serving as the Technical Administrator for Pacific Northwest National Laboratory (PNNL). This report describes the field measurements, data analysis, and results of this work.« less

Final Data Report: P- and S-Wave Velocity Logging Borings C4993, C4996, and C4997 Part B: Overall Logs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diehl, John; Steller, Robert

2007-03-20

Insitu borehole P- and S-wave velocity measurements were collected in three borings located within the Waste Treatment Plant (WTP) boundaries at the Hanford Site, southeastern Washington. Geophysical data acquisition was performed between August and October of 2006 by Rob Steller, Charles Carter, Antony Martin and John Diehl of GEOVision. Data analysis was performed by Rob Steller and John Diehl, and reviewed by Antony Martin of GEOVision, and report preparation was performed by John Diehl and reviewed by Rob Steller. The work was performed under subcontract with Battelle, Pacific Northwest Division with Marty Gardner as Battelle’s Technical Representative and Alan Rohaymore » serving as the Technical Administrator for Pacific Northwest National Laboratory (PNNL). This report describes the field measurements, data analysis, and results of this work.« less

Do technical skills correlate with non-technical skills in crisis resource management: a simulation study.

PubMed

Riem, N; Boet, S; Bould, M D; Tavares, W; Naik, V N

2012-11-01

Both technical skills (TS) and non-technical skills (NTS) are key to ensuring patient safety in acute care practice and effective crisis management. These skills are often taught and assessed separately. We hypothesized that TS and NTS are not independent of each other, and we aimed to evaluate the relationship between TS and NTS during a simulated intraoperative crisis scenario. This study was a retrospective analysis of performances from a previously published work. After institutional ethics approval, 50 anaesthesiology residents managed a simulated crisis scenario of an intraoperative cardiac arrest secondary to a malignant arrhythmia. We used a modified Delphi approach to design a TS checklist, specific for the management of a malignant arrhythmia requiring defibrillation. All scenarios were recorded. Each performance was analysed by four independent experts. For each performance, two experts independently rated the technical performance using the TS checklist, and two other experts independently rated NTS using the Anaesthetists' Non-Technical Skills score. TS and NTS were significantly correlated to each other (r=0.45, P<0.05). During a simulated 5 min resuscitation requiring crisis resource management, our results indicate that TS and NTS are related to one another. This research provides the basis for future studies evaluating the nature of this relationship, the influence of NTS training on the performance of TS, and to determine whether NTS are generic and transferrable between crises that require different TS.

An Assessment of Need for Developing and Implementing Technical and Skilled Worker Training for the Solar Energy Industry.

ERIC Educational Resources Information Center

Orsak, Charles G.; And Others

A Navarro College, Texas, study determined the quantitative and qualitative needs for developing skilled manpower for the solar industry and secondarily identified the (present) solar industry manpower populations and tasks performed by solar technical and skilled workers. Results from three initial working groups addressing equipment, market…

Bibliography of Lewis Research Center technical publications announced in 1980

NASA Technical Reports Server (NTRS)

1981-01-01

This compilation of abstracts describes and indexes over 780 research reports, journal articles, conference presentations, patents and patent applications, and theses resulting from the scientific and engineering work performed and managed by the Lewis Research Center in 1980. All the publications were announced in Scientific and Technical Aerospace Reports and/or International Aerospace Abstracts.

Multidisciplinary crisis simulations: the way forward for training surgical teams.

PubMed

Undre, Shabnam; Koutantji, Maria; Sevdalis, Nick; Gautama, Sanjay; Selvapatt, Nowlan; Williams, Samantha; Sains, Parvinderpal; McCulloch, Peter; Darzi, Ara; Vincent, Charles

2007-09-01

High-reliability organizations have stressed the importance of non-technical skills for safety and of regularly providing such training to their teams. Recently safety skills training has been applied in the practice of medicine. In this study, we developed and piloted a module using multidisciplinary crisis scenarios in a simulated operating theatre to train entire surgical teams. Twenty teams participated (n = 80); each consisted of a trainee surgeon, anesthetist, operating department practitioner (ODP), and scrub nurse. Crisis scenarios such as difficult intubation, hemorrhage, or cardiac arrest were simulated. Technical and non-technical skills (leadership, communication, team skills, decision making, and vigilance), were assessed by clinical experts and by two psychologists using relevant technical and human factors rating scales. Participants received technical and non-technical feedback, and the whole team received feedback on teamwork. Trainees assessed the training favorably. For technical skills there were no differences between surgical trainees' assessment scores and the assessment scores of the trainers. However, nurses overrated their technical skill. Regarding non-technical skills, leadership and decision making were scored lower than the other three non-technical skills (communication, team skills, and vigilance). Surgeons scored lower than nurses on communication and teamwork skills. Surgeons and anesthetists scored lower than nurses on leadership. Multidisciplinary simulation-based team training is feasible and well received by surgical teams. Non-technical skills can be assessed alongside technical skills, and differences in performance indicate where there is a need for further training. Future work should focus on developing team performance measures for training and on the development and evaluation of systematic training for technical and non-technical skills to enhance team performance and safety in surgery.

Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group.

PubMed

Betsou, Fay; Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

2016-10-01

This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality.

Assays for Qualification and Quality Stratification of Clinical Biospecimens Used in Research: A Technical Report from the ISBER Biospecimen Science Working Group

PubMed Central

Bulla, Alexandre; Cho, Sang Yun; Clements, Judith; Chuaqui, Rodrigo; Coppola, Domenico; De Souza, Yvonne; De Wilde, Annemieke; Grizzle, William; Guadagni, Fiorella; Gunter, Elaine; Heil, Stacey; Hodgkinson, Verity; Kessler, Joseph; Kiehntopf, Michael; Kim, Hee Sung; Koppandi, Iren; Shea, Katheryn; Singh, Rajeev; Sobel, Marc; Somiari, Stella; Spyropoulos, Demetri; Stone, Mars; Tybring, Gunnel; Valyi-Nagy, Klara; Van den Eynden, Gert; Wadhwa, Lalita

2016-01-01

This technical report presents quality control (QC) assays that can be performed in order to qualify clinical biospecimens that have been biobanked for use in research. Some QC assays are specific to a disease area. Some QC assays are specific to a particular downstream analytical platform. When such a qualification is not possible, QC assays are presented that can be performed to stratify clinical biospecimens according to their biomolecular quality. PMID:27046294

Fundamentals of Modeling, Data Assimilation, and High-performance Computing

NASA Technical Reports Server (NTRS)

Rood, Richard B.

2005-01-01

This lecture will introduce the concepts of modeling, data assimilation and high- performance computing as it relates to the study of atmospheric composition. The lecture will work from basic definitions and will strive to provide a framework for thinking about development and application of models and data assimilation systems. It will not provide technical or algorithmic information, leaving that to textbooks, technical reports, and ultimately scientific journals. References to a number of textbooks and papers will be provided as a gateway to the literature.

Evaluation of Factors Unique to Multifunction Controls/Displays Devices

DTIC Science & Technology

1980-11-01

different Iron Report) 18. SUPPLEMENTARY NOTES This work was performed by the contractor at the Flight Dynamics Laboratory, Flight Control Division, Crew...This Technical Report is the result of a work effort performed by the Require- ments and Analysis Group of the Crew Systems Development Branch (FIGR...human factors. Mr. Emmett Herron of the Bunker Ramo Corporation provided pilot inputs to the work efforts, and Ms. Gloria Calhoun of the same company

Technical Performance as a Predictor of Clinical Outcomes in Laparoscopic Gastric Cancer Surgery.

PubMed

Fecso, Andras B; Bhatti, Junaid A; Stotland, Peter K; Quereshy, Fayez A; Grantcharov, Teodor P

2018-03-23

The purpose of this study was to evaluate the relationship between technical performance and patient outcomes in laparoscopic gastric cancer surgery. Laparoscopic gastrectomy for cancer is an advanced procedure with high rate of postoperative morbidity and mortality. Many variables including patient, disease, and perioperative management factors have been shown to impact postoperative outcomes; however, the role of surgical performance is insufficiently investigated. A retrospective review was performed for all patients who had undergone laparoscopic gastrectomy for cancer at 3 teaching institutions between 2009 and 2015. Patients with available, unedited video-recording of their procedure were included in the study. Video files were rated for technical performance, using Objective Structured Assessments of Technical Skills (OSATS) and Generic Error Rating Tool instruments. The main outcome variable was major short-term complications. The effect of technical performance on patient outcomes was assessed using logistic regression analysis with backward selection strategy. Sixty-one patients with available video recordings were included in the study. The overall complication rate was 29.5%. The mean Charlson comorbidity index, type of procedure, and the global OSATS score were included in the final predictive model. Lower performance score (OSATS ≤29) remained an independent predictor for major short-term outcomes (odds ratio 6.49), while adjusting for comorbidities and type of procedure. Intraoperative technical performance predicts major short-term outcomes in laparoscopic gastrectomy for cancer. Ongoing assessment and enhancement of surgical skills using modern, evidence-based strategies might improve short-term patient outcomes. Future work should focus on developing and studying the effectiveness of such interventions in laparoscopic gastric cancer surgery.

Rising to the Challenge: Acute Stress Appraisals and Selection Centre Performance in Applicants to Postgraduate Specialty Training in Anaesthesia

ERIC Educational Resources Information Center

Roberts, Martin J.; Gale, Thomas C. E.; McGrath, John S.; Wilson, Mark R.

2016-01-01

The ability to work under pressure is a vital non-technical skill for doctors working in acute medical specialties. Individuals who evaluate potentially stressful situations as challenging rather than threatening may perform better under pressure and be more resilient to stress and burnout. Training programme recruitment processes provide an…

FY 1987 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents a detailed description of the activities to be performed by the Joint Integration Office during FY87. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance, task monitoring, informationmore » gathering and task reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of program status reports for DOE. Program Analysis is performed by the JIO to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. This work plan includes: system analyses, requirements analyses, interim and procedure development, legislative and regulatory analyses, dispatch and traffic analyses, and data bases.« less

Bibliography of Lewis Research Center Technical Publications announced in 1979

NASA Technical Reports Server (NTRS)

1980-01-01

This compilation of over 1100 abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Lewis Research Center in 1979. All the publications were announced in the 1979 issues of STAR (Scientific and Technical Aerospace Reports) and/or IAA (International Aerospace Abstracts). Research reports, journal articles, conference presentations, patents and patent applications, and theses are included. Subject, author, corporate source, contract number, and report number indexes are provided.

Combining Systems and Teamwork Approaches to Enhance the Effectiveness of Safety Improvement Interventions in Surgery: The Safer Delivery of Surgical Services (S3) Program.

PubMed

McCulloch, Peter; Morgan, Lauren; New, Steve; Catchpole, Ken; Roberston, Eleanor; Hadi, Mohammed; Pickering, Sharon; Collins, Gary; Griffin, Damian

2017-01-01

Patient safety improvement interventions usually address either work systems or team culture. We do not know which is more effective, or whether combining approaches is beneficial. To compare improvement in surgical team performance after interventions addressing teamwork culture, work systems, or both. Suite of 5 identical controlled before-after intervention studies, with preplanned analysis of pooled data for indirect comparisons of strategies. Operating theatres in 5 UK hospitals performing elective orthopedic, plastic, or vascular surgery PARTICIPANTS:: All operating theatres staff, including surgeons, nurses, anaesthetists, and others INTERVENTIONS:: 4-month safety improvement interventions, using teamwork training (TT), systems redesign and standardization (SOP), Lean quality improvement, SOP + TT combination, or Lean + TT combination. Team technical and nontechnical performance and World Health Organization (WHO) checklist compliance, measured for 3 months before and after intervention using validated scales. Pooled data analysis of before-after change in active and control groups, comparing combined versus single and systems versus teamwork interventions, using 2-way ANOVA. We studied 453 operations, (255 intervention, 198 control). TT improved nontechnical skills and WHO compliance (P < 0.001), but not technical performance; systems interventions (Lean & SOP, 2 & 3) improved nontechnical skills and technical performance (P < 0.001) but improved WHO compliance less. Combined interventions (4 & 5) improved all performance measures except WHO time-out attempts, whereas single approaches (1 & 2 & 3) improved WHO compliance less (P < 0.001) and failed to improve technical performance. Safety interventions combining teamwork training and systems rationalization are more effective than those adopting either approach alone. This has important implications for safety improvement strategies in hospitals.

Integrated Requirements Analysis and Technology Roadmaps

NASA Technical Reports Server (NTRS)

1997-01-01

In fiscal year 1997, Strategic Insight performed analytical studies for NASA's Highly Reusable Space Transportation (HRST) program, creating program documents which illuminated technical requirements and critical research opportunities. Studies were performed to structure and confirm HRST's evolving technical requirements, building on Marshall's Phase 1 work, which defined HRST system concepts, analytical tools and high-level issues for assessment in Phase 2. Specifically, Strategic Insight: (1) Performed a requirements analysis to update HRST: An Advanced Concepts Study, Study Guidelines, Version 2.0 of January 22, 1996; only minor changes were recommended for the given parameters of interest to concept designers; (2) Conducted mini-workshops during HRST Working Group meetings on April 14-15, 1997 and July 22-24, 1997; and (3) Created structures for technology road maps of candidate HRST concepts, both subsystem and end-to-end concepts, emerging from the 13 cooperative agreement projects.

Improving Space Project Cost Estimating with Engineering Management Variables

NASA Technical Reports Server (NTRS)

Hamaker, Joseph W.; Roth, Axel (Technical Monitor)

2001-01-01

Current space project cost models attempt to predict space flight project cost via regression equations, which relate the cost of projects to technical performance metrics (e.g. weight, thrust, power, pointing accuracy, etc.). This paper examines the introduction of engineering management parameters to the set of explanatory variables. A number of specific engineering management variables are considered and exploratory regression analysis is performed to determine if there is statistical evidence for cost effects apart from technical aspects of the projects. It is concluded that there are other non-technical effects at work and that further research is warranted to determine if it can be shown that these cost effects are definitely related to engineering management.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Minton-Summers, S.; Ray, C. D.

1996-01-01

A summary of work accomplished under Technical Task Agreement by the Marshall Space Flight Center (MSFC) documents activities regarding the Environmental Control and Life Support Systems (ECLSS) of the International Space Station (ISS) program. These MSFC activities were in-line to the designing, the development, the testing, and the flight of ECLSS equipment. MSFC's unique capabilities for performing integrated system testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs are the basis for the Technical Task Agreement activities. Tasks were completed in the Water Recovery Systems, Air Revitalization Systems, and microbiology areas. The results of each task is described in this summary report.

CF60 Concrete Composition Design and Application on Fudiankou Xijiang Super Large Bridge

NASA Astrophysics Data System (ADS)

Qiu, Yi Mei; Wen, Sen Yuan; Chen, Jun Xiang

2018-06-01

Guangxi Wuzhou City Ring Road Fudiankou Xijiang super large bridge CF60 concrete is a new multi-phase composite high-performance concrete, this paper for the Fudiankou Xijiang bridge structure and characteristics of the project, in accordance with the principle of local materials and technical specification requirements, combined with the site conditions of CF60 engineering high performance concrete component materials, proportion and the technical performance, quantify the main physical and mechanical performance index. Analysis main influencing factors of the technical indicators, reasonable adjustment of concrete mix design parameters, and the use of technical means of admixture and multi-function composite admixture of concrete, obtain the optimal proportion of good work, process, mechanical properties stability and durability of engineering properties, recommend and verification of concrete mix; to explore the CF60 high performance concrete Soil in the Fudiankou Xijiang bridge application technology, detection and tracking the quality of concrete construction, concrete structure during the construction of the key technology and control points is proposed, evaluation of CF60 high performance concrete in the actual engineering application effect and benefit to ensure engineering quality of bridge structure and service life, and super long span bridge engineering construction to provide basis and reference.

Technical Assistance to Developers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.

2012-07-17

This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols,more » and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.« less

48 CFR 9.502 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-10-01

... subpart applies to contracts with either profit or nonprofit organizations, including nonprofit... engineering and technical direction work performed by a contractor that does not have overall contractual...

Characterizing complexity in socio-technical systems: a case study of a SAMU Medical Regulation Center.

PubMed

Righi, Angela Weber; Wachs, Priscila; Saurin, Tarcísio Abreu

2012-01-01

Complexity theory has been adopted by a number of studies as a benchmark to investigate the performance of socio-technical systems, especially those that are characterized by relevant cognitive work. However, there is little guidance on how to assess, systematically, the extent to which a system is complex. The main objective of this study is to carry out a systematic analysis of a SAMU (Mobile Emergency Medical Service) Medical Regulation Center in Brazil, based on the core characteristics of complex systems presented by previous studies. The assessment was based on direct observations and nine interviews: three of them with regulator of emergencies medical doctor, three with radio operators and three with telephone attendants. The results indicated that, to a great extent, the core characteristics of complexity are magnified) due to basic shortcomings in the design of the work system. Thus, some recommendations are put forward with a view to reducing unnecessary complexity that hinders the performance of the socio-technical system.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Using computer software to improve group decision-making.

PubMed

Mockler, R J; Dologite, D G

1991-08-01

This article provides a review of some of the work done in the area of knowledge-based systems for strategic planning. Since 1985, with the founding of the Center for Knowledge-based Systems for Business Management, the project has focused on developing knowledge-based systems (KBS) based on these models. In addition, the project also involves developing a variety of computer and non-computer methods and techniques for assisting both technical and non-technical managers and individuals to do decision modelling and KBS development. This paper presents a summary of one segment of the project: a description of integrative groupware useful in strategic planning. The work described here is part of an ongoing research project. As part of this project, for example, over 200 non-technical and technical business managers, most of them working full-time during the project, developed over 160 KBS prototype systems in conjunction with MBA course in strategic planning and management decision making. Based on replies to a survey of this test group, 28 per cent of the survey respondents reported their KBS were used at work, 21 per cent reportedly received promotions, pay rises or new jobs based on their KBS development work, and 12 per cent reported their work led to participation in other KBS development projects at work. All but two of the survey respondents reported that their work on the KBS development project led to a substantial increase in their job knowledge or performance.

Use of technical skills and medical devices among new registered nurses: A questionnaire study.

PubMed

Ewertsson, Mona; Gustafsson, Margareta; Blomberg, Karin; Holmström, Inger K; Allvin, Renée

2015-12-01

One comprehensive part of nursing practice is performing technical skills and handling of medical equipment. This might be challenging for new registered nurses (RNs) to do in patient-safe way. The aim of this study was to describe and compare the extent to which new RNs perform various technical skills and handle medical devices in different settings, and to investigate their possibility for continued learning in this respect. A further aim was to describe their perceptions of incident reporting related to technical skills and medical devices. A cross-sectional study with descriptive and comparative design. RNs who recently graduated from a nursing programme at three Swedish universities and had worked as a RN for up to 1 year were included in the study (n=113, response rate 57%). Data were collected by means of a postal questionnaire. Half of the RNs reported that they performed several of the listed tasks every day or every week, regardless of workplace. These tasks were most frequently performed in surgical departments. The majority of the participants (76%) stated a need of continued practical training. However, less than half of them (48%) had access to a training environment. Several participants (43%) had been involved in incidents related to technical skills or medical devices, which were not always reported. Nearly a third of the participants (31%) did not use the existing guidelines when performing technical skills, and reflection on performance was uncommon. This study highlights the importance of shared responsibilities between nurse educators and health care employers to provide learning opportunities for new RNs in technical skills, to maintain patient safety. To increase the safety culture where nursing students and new RNs understand the importance of using evidence-based guidelines and taking a reflective approach in the performance of technical tasks is needed. Copyright © 2015 Elsevier Ltd. All rights reserved.

ISDP salt batch #2 supernate qualification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, T. B.; Nash, C. A.; Fink, S. D.

2009-01-05

This report covers the laboratory testing and analyses of the second Integrated Salt Disposition Project (ISDP) salt supernate samples, performed in support of initial radioactive operations of Actinide Removal Process (ARP) and Modular Caustic-Side Solvent Extraction Unit (MCU). Major goals of this work include characterizing Tank 22H supernate, characterizing Tank 41H supernate, verifying actinide and strontium adsorption with a standard laboratory-scale test using monosodium titanate (MST) and filtration, and checking cesium mass transfer behavior for the MCU solvent performance when contacted with the liquid produced from MST contact. This study also includes characterization of a post-blend Tank 49H sample asmore » part of the Nuclear Criticality Safety Evaluation (NCSE). This work was specified by Task Technical Request and by Task Technical and Quality Assurance Plan (TTQAP). In addition, a sampling plan will be written to guide analytical future work. Safety and environmental aspects of the work were documented in a Hazard Assessment Package.« less

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry HighSpeed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of. Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single- and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

1998 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

McMillin, S. Naomi (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1998 Aerodynamic Performance Technical Review on February 9-13, in Los Angeles, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High-Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working HSCT aerodynamics. In particular, single and multi-point optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program.

48 CFR 2009.570-2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... work to be performed under an NRC contract which: (1) May diminish its capacity to give impartial, technically sound, objective assistance and advice, or may otherwise result in a biased work product; or (2) May result in its being given an unfair competitive advantage. Potential conflict of interest means...

48 CFR 2009.570-2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... work to be performed under an NRC contract which: (1) May diminish its capacity to give impartial, technically sound, objective assistance and advice, or may otherwise result in a biased work product; or (2) May result in its being given an unfair competitive advantage. Potential conflict of interest means...

Site planning and integration fiscal year 1999 multi-year work plan (MYWP) update for WBS 1.8.2.1

DOE Office of Scientific and Technical Information (OSTI.GOV)

SCHULTZ, E.A.

The primary mission of the Site Planning and Integration (SP and I) project is to assist Fluor Daniel Project Direction to ensure that all work performed under the Project Hanford Management Contract (PHMC) is adequately planned, executed, controlled, and that performance is measured and reported in an integrated fashion. Furthermore, SP and I is responsible for the development, implementation, and management of systems and processes that integrate technical, schedule, and cost baselines for PHMC work.

Advanced Thermal Emission Imaging Systems Definition and Development

NASA Technical Reports Server (NTRS)

Blasius, Karl; Nava, David (Technical Monitor)

2002-01-01

Santa Barbara Remote Sensing (SBRS), Raytheon Company, is pleased to submit this quarterly progress report of the work performed in the third quarter of Year 2 of the Advanced THEMIS Project, July through September 2002. We review here progress in the proposed tasks. During July through September 2002 progress was made in two major tasks, Spectral Response Characterization and Flight Instrument Definition. Because of staffing problems and technical problems earlier in the program we have refocused the remaining time and budget on the key technical tasks. Current technical problems with a central piece of test equipment has lead us to request a 1 quarter extension to the period of performance. This request is being made through a separate letter independent of this report.

Assessing the use of psychological skills by sports category and the relation with sports performance satisfaction.

PubMed

Tomé-Lourido, David; Arce, Constantino; Vales-Vázquez, Ángel; Ponte, Dolores

2018-05-02

The evaluation of psychological skills by athletes and their relationship with sports performance and satisfaction has been of great interest in recent decades. Likewise, there has been an emergent tendency to focus on developing specific psychological skills for each sport. The principal aim of this study was to determine the frequency with which athletes deploy psychological skills whilst competing and whether their frequency varies in accordance with the technical, tactical and physical characteristics of the sport in question. A further objective was to establish the connection between the frequency of use of psychological skills and athletes' degree of satisfaction with their performance. The study comprised 1003 athletes practising 43 different sports, grouped into 7 categories based on the similarities between them. Frequency of use of the psychological skills was measured with the Test of Performance Strategies 3. The data analyses allowed the following conclusions to be drawn: the degree to which psychological skills are used is dependent on the technical, tactical and physical characteristics of each sport; and the higher the frequency of the use of psychological skills, the greater the athletes' degree of satisfaction with their performance. These results allow athletes and coaches to increase levels of sports performance by working on the use of psychological skills, adapted to the technical, tactical or physical requirements of the category in which their sport is included. In addition, working on different psychological skills will improve their satisfaction with sports performance.

A Critical Examination of the Construct Validity of the TTI Performance DNA[TM] Survey for the Purpose of Differentiating the Entrepreneurially-Minded Engineer

ERIC Educational Resources Information Center

Dietrich, Sandra L.

2012-01-01

The United States needs workers with more than technical skills to meet the demands of global competition; more specifically, a new breed of engineer is necessary, one who possesses leadership skills and business acumen in addition to the technical engineering skills. One Midwestern foundation has recognized this challenge and is working with…

Online and Hybrid Course Enrollment and Performance in Washington State Community and Technical Colleges. CCRC Working Paper No. 31

ERIC Educational Resources Information Center

Xu, Di; Jaggars, Shanna Smith

2011-01-01

This report investigates enrollment patterns and academic outcomes in online, hybrid, and face-to-face courses among students who enrolled in Washington State community and technical colleges in the fall of 2004. Students were tracked for nearly five years, until the spring of 2009. Results were similar to those found in a parallel study in…

AGARD Bulletin Technical Programme 1986.

DTIC Science & Technology

1985-08-01

basic research findings are being exploited by the pharmaceutical industry to develop new performance enhancing drugs with limited side effects and to... effects of nutrients on performance will also be considered. SHORT COURSE ( K Subject to final approval by the National Delegates Board at its Fall...coordinated with the AVP. WORKING GROUP The EPP will initiate Working Group-02 on "Near Water Propagation Effects and Modem System Adaptation". This

The Relationship Between Cosmopolitan-Local Orientation and Job Performance

ERIC Educational Resources Information Center

London, Manuel; And Others

1977-01-01

Relationships between cosmopolitan--local orientation and measures of job performance were examined for 150 technical employees in three architectural firms. Cosmopolitan orientation was positively related to supervisor ratings of following prescribed work hours and supervisor and co-worker ratings of impressing others. (Author)

49 CFR 800.4 - Operation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Operation. In exercising its functions, duties, and responsibilities, the Board utilizes: (a) The Board's... performing administrative and technical work for the Board. The staff advises the Board and performs duties... directives system is designated as the NTSB Manual and consists of instructions which are called NTSB Orders...

Development of superior asphalt recycling agents. Phase 1, Technical feasibility. Final technical progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bullin, J.A.; Davison, R.R.; Glover, C.J.

1997-07-01

After an introduction and a literature survey in Chap. 1, Chap. 2 describes the tasks, together with objectives and important results obtained for each task throughout the entire project. Chaps. 3 thru 7 detail work in developing a qualitative and quantitative knowledge of asphalt oxidation, composition dependence of asphalt properties, and guidelines for producing superior asphalt binders through composition control. They also detail the development of a kinetic model for asphalt oxidative aging and present an understanding of the composition dependence of asphalt oxidation as well as other performance-related properties. Chaps. 8 and 9 compare the aging performance of recycledmore » blends produced using commercial recycling agents and industrial supercritical fractions as rejuvenating agents. Oxidative aging of the recycled blends were evaluated along with the performance of the recycled blends in terms of the strategic highway research program performance grading procedure. Chap. 10 summarizes the work completed in the areas of processing schemes development, projection updates, and scale-up and commercialization plans.« less

Air Quality Benefits of Nighttime Construction in Texas Non-Attainment Counties--Technical Report.

DOT National Transportation Integrated Search

2017-12-15

The practice of performing some work zone activities at night has existed in the United States since at least the 1960s. Night work is most commonly initiated where it is impractical to close traffic lanes on certain high-volume roadways during norma...

Gender in Communication: Micropolitics at Work.

ERIC Educational Resources Information Center

Peters, Carole C.

Although interpersonal and relational skills are clearly relevant to successful performance in many jobs and roles, there is evidence that these skills are not valued in the same way as technical skills or the skills of self-promotion and "managing up." The label "women's work" is often linked to interpersonal competence with…

Dane Christensen | NREL

Science.gov Websites

-performance building simulation. Dane supports technical efforts for the Building America Program and conducts finite element modeling for building energy simulation. Prior to joining NREL, Dane worked at Atec, Inc

Skills training after night shift work enables acquisition of endovascular technical skills on a virtual reality simulator.

PubMed

Naughton, Peter A; Aggarwal, Rajesh; Wang, Tim T; Van Herzeele, Isabelle; Keeling, Aoife N; Darzi, Ara W; Cheshire, Nicholas J W

2011-03-01

Adoption of residents' working time restrictions potentially undermines surgical training by reduction of operating room exposure. Simulation has been proposed as a way to acquire necessary skills in a laboratory environment but remains difficult to incorporate into training schedules. This study assessed whether residents working successive nights could acquire endovascular skills similar to colleagues working day shifts. This prospective observational cohort study recruited 20 junior residents, divided into day shift and night shift groups by their respective call schedule. After initial cognitive skills training, a validated renal artery stent module on an endovascular simulator was completed over a series of seven sequential shifts during 1 week. The primary outcome measure was serial technical skill assessments. Secondary measures comprised assessments of activity, cognitive performance, introspective fatigue, quality, and quantity of preceding sleep. Both groups demonstrated significant learning curves for total time at the first session median vs seventh session median (181 vs 564 seconds [P < .001]; night, 1399 vs 572 [P < .001]), fluoroscopy time (day, 702 vs 308 seconds, [P < .001]; night, 669 vs 313 [P < .001]), and contrast volume (day, 29 vs 13 mL [P < .001]; night, 40 vs 16 [P < .001]). Residents working day shifts reached plateau 1 day earlier in the above measures vs those on night duty. The night shift group walked more steps (P < .001), reviewed more patients (P < .001), performed worse on all cognitive assessments (P < .05), slept less (P < .05), had poorer quality of sleep (P = .001), and was more fatigued (P < .001) than the day shift group. Acquired skill was retained a week after completion of shifts. Technical skills training after night shift work enables acquisition of endovascular technical skills, although it takes longer than after day shift training. This study provides evidence for program directors to organize simulation-based training schedules for residents on night shift rotations. Copyright © 2011. Published by Mosby, Inc.

Standards and Trade in the 1990s

DTIC Science & Technology

1993-01-01

in the 1990s This Technical Committee decided to work efforts made by EWOS (European Work - on ENs and ENVs for, among ...EMC work is that it possible, the results of our global partner, cannot be performed in isolation, by one the International Electrotechnical Commis...evolution of standards ficient operation and sound management and conformity assessment in the United depend on the

Life as a NATO Engineer

DTIC Science & Technology

2010-08-01

NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...management; leads military in case of specialized survey; supervises more than 25 local civilian employees ; acts as technical expert during contract...Security Assistance Force Head- quarters Camp. I knew I could handle the job of project manager, but wondered about acting as contract manager, technical ex

48 CFR 1852.212-70 - Notice of delay.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Delay (DEC 1988) If, because of technical difficulties, the Contractor becomes unable to complete the... performing the work called for under this contract, the Contractor shall give the Contracting Officer written...

48 CFR 1852.212-70 - Notice of delay.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Delay (DEC 1988) If, because of technical difficulties, the Contractor becomes unable to complete the... performing the work called for under this contract, the Contractor shall give the Contracting Officer written...

48 CFR 1852.212-70 - Notice of delay.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Delay (DEC 1988) If, because of technical difficulties, the Contractor becomes unable to complete the... performing the work called for under this contract, the Contractor shall give the Contracting Officer written...

48 CFR 1852.212-70 - Notice of delay.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Delay (DEC 1988) If, because of technical difficulties, the Contractor becomes unable to complete the... performing the work called for under this contract, the Contractor shall give the Contracting Officer written...

48 CFR 1852.212-70 - Notice of delay.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Delay (DEC 1988) If, because of technical difficulties, the Contractor becomes unable to complete the... performing the work called for under this contract, the Contractor shall give the Contracting Officer written...

Practical implementation of the concept of converted electric vehicle with advanced traction and dynamic performance and environmental safety indicators

NASA Astrophysics Data System (ADS)

Sidorov, K. M.; Yutt, V. E.; Grishchenko, A. G.; Golubchik, T. V.

2018-02-01

The objective of the work presented in this paper is to describe the implementation of the technical solutions have been developed, with regard to structure, composition, and characteristics, for an experimental prototype of an electric vehicle which has been converted from a conventional vehicle. The methodology of the study results is based on the practical implementation of the developed concept of the conversion of conventional vehicles into electric vehicles. The main components of electric propulsion system of the experimental prototype of electric vehicle are developed and manufactured on the basis of computational researches, taking into account the criteria and principles of conversion within the framework of presented work. The article describes a schematic and a design of power conversion and commutation electrical equipment, traction battery, electromechanical transmission. These results can serve as guidance material in the design and implementation of electric propulsion system (EPS) components of electric vehicles, facilitate the development of optimal technical solutions in the development and manufacture of vehicles, including those aimed at autonomy of operation and the use of perspective driver assistance systems. As part of this work, was suggested a rational structure for an electric vehicle experimental prototype, including technical performance characteristics of the components of EPS.

Company Training. A Key Strategy for Success. Workforce Brief #2.

ERIC Educational Resources Information Center

Bergman, Terri

General research and anecdotal reports have confirmed that both technical and basic skills training offer many benefits to companies of all sizes. Company training can improve employee performance, firm productivity, product quality, and company profitability. Training supports "high-performance" work practices such as the following: total quality…

Hanford business structure for HANDI 2000 business management system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilson, D.

The Hanford Business Structure integrates the project`s technical, schedule, and cost baselines; implements the use of a standard code of accounts; and streamlines performance reporting and cost collection. Technical requirements drive the technical functions and come from the RDD 100 database. The functions will be identified in the P3 scheduling system and also in the PeopleSoft system. Projects will break their work down from the technical requirements in the P3 schedules. When the level at which they want to track cost via the code of accounts is reached, a Project ID will be generated in the PeopleSoft system. P3 maymore » carry more detailed schedules below the Project ID level. The standard code of accounts will identify discrete work activities done across the site and various projects. They will include direct and overhead type work scopes. Activities in P3 will roll up to this standard code of accounts. The field that will be used to record this in PeopleSoft is ``Activity``. In Passport it is a user-defined field. It will have to be added to other feeder systems. Project ID and code of accounts are required fields on all cost records.« less

Field Implementation Plan for the In-Situ Bioremediation Treatability Study at the Technical Area-V Groundwater Area of Concern

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Jun

This Field Implementation Plan (FIP) was prepared by Sandia National Laboratories, New Mexico (SNL/NM) and provides instruction on conducting a series of in-situ bioremediation (ISB) tests as described in the Revised Treatability Study Work Plan for In-Situ Bioremediation at the Technical Area-V Groundwater Area of Concern, referred to as the Revised Work Plan in this FIP. The Treatability Study is designed to gravity inject an electron-donor substrate and bioaugmentation bacteria into groundwater via three injection wells to perform bioremediation of the constituents of concern (COCs), nitrate and trichloroethene (TCE), in the regions with the highest concentrations at the Technical Area-Vmore » Groundwater (TAVG) Area of Concern (AOC). The Treatability Study will evaluate the effectiveness of bioremediation solution delivery and COC treatment over time. This FIP is designed for SNL/NM work planning and management. It is not intended to be submitted for regulator’s approval. The technical details presented in this FIP are subject to change based on field conditions, availability of equipment and materials, feasibility, and inputs from Sandia personnel and Aboveground Injection System contractor.« less

Technical Performance Measurement, Earned Value, and Risk Management: An Integrated Diagnostic Tool for Program Management

DTIC Science & Technology

2002-06-01

time, the monkey would eventually produce the collected works of Shakespeare . Unfortunately for the analogist, systems, even live ones, do not work...limited his simulated computer monkey to producing, in a single random step, the sentence uttered by Polonius in the play Hamlet : “Methinks it is

[The nurse-healthcare assistant partnership: a learning tool?].

PubMed

Martin, Yolaine; Chauzy, Sébastien; Pasticcio, Denise; Blivet, Annie

2015-02-01

In intensive care, working in a nurse-healthcare assistant partnership is essential. It facilitates the way they receive the patient, organise and work together in performing technical procedures, provide personal care and comfort and compensate for a decrease in or loss of autonomy. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

History and Development of Instructional Technology and Media in Social Work Education

ERIC Educational Resources Information Center

Shorkey, Clayton T.; Uebel, Michael

2014-01-01

Since the mid-20th century, instructional technologies and educational media in social work education have undergone significant development with the goals of improving learning and performance and enhancing access. This growth has been marked by technical advances in hardware and by innovations in media, or so-called soft formats. Current…

[Creation of a medical work station for use in community-based care].

PubMed

Mercier, Samuel; Desauty, Fabrice; Lamache, Christophe; Lefort, Hugues

2017-03-01

In community-based care, the teams must adapt to the environment and perform a number of technical procedures. Foldable medical equipment has been developed and patented, enabling the care provision to approach hospital standards and improving working conditions in this context. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

Work Experience Employability Skills, Junior High.

ERIC Educational Resources Information Center

Mims, Murry; And Others

Educators have long recognized the need for schools to train students adequately for the world of work. This training includes both the necessary technical skills and employability skills. This document, the Employability Skills Guide, is Duval County Schools' part of such a plan to meet this need. The performance objectives utilized in this guide…

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 1/Part 1 publication covers configuration aerodynamics.

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among die scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 2/Part 2 publication covers the tools and methods development session.

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 1; Configuration Aerodynamics

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

NASA's High-Speed Research Program sponsored the 1999 Aerodynamic Performance Technical Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in the areas of Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization), High Lift, and Flight Controls. The review objectives were to (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientists and engineers working on HSCT aerodynamics. In particular, single and midpoint optimized HSCT configurations, HSCT high-lift system performance predictions, and HSCT simulation results were presented, along with executive summaries for all the Aerodynamic Performance technology areas. The HSR Aerodynamic Performance Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration. Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas of the HSR Program. This Volume 1/Part 2 publication covers the design optimization and testing sessions.

International comparisons of the technical efficiency of the hospital sector: panel data analysis of OECD countries using parametric and non-parametric approaches.

PubMed

Varabyova, Yauheniya; Schreyögg, Jonas

2013-09-01

There is a growing interest in the cross-country comparisons of the performance of national health care systems. The present work provides a comparison of the technical efficiency of the hospital sector using unbalanced panel data from OECD countries over the period 2000-2009. The estimation of the technical efficiency of the hospital sector is performed using nonparametric data envelopment analysis (DEA) and parametric stochastic frontier analysis (SFA). Internal and external validity of findings is assessed by estimating the Spearman rank correlations between the results obtained in different model specifications. The panel-data analyses using two-step DEA and one-stage SFA show that countries, which have higher health care expenditure per capita, tend to have a more technically efficient hospital sector. Whether the expenditure is financed through private or public sources is not related to the technical efficiency of the hospital sector. On the other hand, the hospital sector in countries with higher income inequality and longer average hospital length of stay is less technically efficient. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Engineered Barrier System: Physical and Chemical Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

P. Dixon

2004-04-26

The conceptual and predictive models documented in this Engineered Barrier System: Physical and Chemical Environment Model report describe the evolution of the physical and chemical conditions within the waste emplacement drifts of the repository. The modeling approaches and model output data will be used in the total system performance assessment (TSPA-LA) to assess the performance of the engineered barrier system and the waste form. These models evaluate the range of potential water compositions within the emplacement drifts, resulting from the interaction of introduced materials and minerals in dust with water seeping into the drifts and with aqueous solutions forming bymore » deliquescence of dust (as influenced by atmospheric conditions), and from thermal-hydrological-chemical (THC) processes in the drift. These models also consider the uncertainty and variability in water chemistry inside the drift and the compositions of introduced materials within the drift. This report develops and documents a set of process- and abstraction-level models that constitute the engineered barrier system: physical and chemical environment model. Where possible, these models use information directly from other process model reports as input, which promotes integration among process models used for total system performance assessment. Specific tasks and activities of modeling the physical and chemical environment are included in the technical work plan ''Technical Work Plan for: In-Drift Geochemistry Modeling'' (BSC 2004 [DIRS 166519]). As described in the technical work plan, the development of this report is coordinated with the development of other engineered barrier system analysis model reports.« less

Studies on Vapor Adsorption Systems

NASA Technical Reports Server (NTRS)

Shamsundar, N.; Ramotowski, M.

1998-01-01

The project consisted of performing experiments on single and dual bed vapor adsorption systems, thermodynamic cycle optimization, and thermal modeling. The work was described in a technical paper that appeared in conference proceedings and a Master's thesis, which were previously submitted to NASA. The present report describes some additional thermal modeling work done subsequently, and includes listings of computer codes developed during the project. Recommendations for future work are provided.

Final Technical Report of the project "Controlling Quantum Information by Quantum Correlations"

DOE Office of Scientific and Technical Information (OSTI.GOV)

Girolami, Davide

The report describes hypotheses, aims, methods and results of the project 20170675PRD2, “Controlling Quantum Information by Quantum Correlations”, which has been run from July 31, 2017 to January 7, 2018. The technical work has been performed by Director’s Fellow Davide Girolami of the T-4 Division, Physics of Condensed Matter and Complex Systems, under the supervision of Wojciech Zurek (T-4), Lukasz Cincio (T-4), and Marcus Daniels (CCS-7). The project ended as Davide Girolami has been converted to J. R. Oppenheimer Fellow to work on the project 20180702PRD1, “Optimal Control of Quantum Machines”, started on January 8, 2018.

CrossTalk: The Journal of Defense Software Engineering. Volume 20, Number 3, March 2007

DTIC Science & Technology

2007-03-01

Capability Maturity Model ® Integration (CMMI®). CMU Software Engineering Institute <www.sei.cmu.edu/cmmi>. 5. ISO /IEC 27001 :2005. Information Security...international standards bodies – International Organization for Standardi- zation ( ISO ) and International Electro- technical Commission (IEC) – are working on a...number of projects that affect soft- ware security: • The ISO Technical Management Board (TMB) performs strategic planning and coordination for ISO

Avionics Simulation, Development and Software Engineering

NASA Technical Reports Server (NTRS)

2002-01-01

During this reporting period, all technical responsibilities were accomplished as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14), the MSFC EXPRESS Project Office (FD31), and the Huntsville Boeing Company. Accomplishments included: performing special tasks; supporting Software Review Board (SRB), Avionics Test Bed (ATB), and EXPRESS Software Control Panel (ESCP) activities; participating in technical meetings; and coordinating issues between the Boeing Company and the MSFC Project Office.

Too much small talk? Medical students' pelvic examination skills falter with pleasant patients.

PubMed

Posner, Glenn D; Hamstra, Stanley J

2013-12-01

The competent performance of a female pelvic examination requires both technical proficiency and superlative communication skills. However, the ideal medium with which to assess these skills remains to be elucidated. Part-task trainers (PTTs) offer an effective and affordable means of testing technical skills, but may not allow students to demonstrate their communication skills. Hybrids involving standardised patients (SPs) (SP-PTT) offer a more realistic assessment of communication, but students may feel awkward when examining the female genitalia. The objective of this study was to compare the use of PTTs with that of SP-PTT hybrids in the assessment of technical and communication skills in the female pelvic examination. A total of 145 medical students were randomised to one of three conditions during their summative objective structured clinical examination (OSCE) at the completion of clerkship. Students performed the female pelvic examination on: (i) a PTT alone ('plastic' condition); (ii) an SP-PTT hybrid with an SP who did not engage in any superfluous conversation ('perfunctory' condition), or (iii) an SP-PTT hybrid with an SP who was trained to offer small talk and banter, which was judged to better reflect the typical doctor-patient interaction ('pleasant' condition). Communication skills did not differ significantly among the three groups (p = 0.354). There was a significant difference among groups in technical skills scores (p = 0.0018). Students in the 'plastic' condition performed best, followed by those in the 'perfunctory' and 'pleasant' conditions, respectively. Medical students demonstrate equivalent communication skills whether they work with a PTT or an SP-PTT hybrid, but their technical skills suffer in the presence of an SP. Working with the PTT alone does not appear to disadvantage students in terms of communication skills, but may offer better conditions for performing technical aspects of the procedure. Whether the 'plastic patient' is the most meaningful and valid means of predicting overall competence in the clinical setting is still a matter for debate. © 2013 John Wiley & Sons Ltd.

Summary of Environmental Data Analysis and Work Performed by Lawrence Livermore National Laboratory (LLNL) in Support of the Navajo Nation Abandoned Mine Lands Project at Tse Tah, Arizona

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taffet, Michael J.; Esser, Bradley K.; Madrid, Victor M.

This report summarizes work performed by Lawrence Livermore National Laboratory (LLNL) under Navajo Nation Services Contract CO9729 in support of the Navajo Abandoned Mine Lands Reclamation Program (NAMLRP). Due to restrictions on access to uranium mine waste sites at Tse Tah, Arizona that developed during the term of the contract, not all of the work scope could be performed. LLNL was able to interpret environmental monitoring data provided by NAMLRP. Summaries of these data evaluation activities are provided in this report. Additionally, during the contract period, LLNL provided technical guidance, instructional meetings, and review of relevant work performed by NAMLRPmore » and its contractors that was not contained in the contract work scope.« less

Performance Analysis of Tower Watch Camera Systems

DTIC Science & Technology

2001-05-01

U.S. Coast Guard Research and Development Center 1082 Shennecossett Road, Groton, CT 06340-6096 Report No. CG-D-10-01 Performance...Project Number Task Number Work Unit Number Performing Organization Name(s) and Address(es) U.S. Coast Guard Research and Development Center 1082 ...Research & Development Center 1082 Shennecossett Road Groton, CT 06340-6096 iii Technical Report Documentation Page 1. Report No. CG

Assurance Policy Evaluation - Spacecraft and Strategic Systems

DTIC Science & Technology

2014-09-17

electromechanical (EEE) parts, software, design and workmanship, work instructions, manufacturing and tooling, cleanrooms, electrostatic discharge ...T9001B.  An external group, called the Evaluation and Assessment Team, made up of product assurance subject matter experts from NSWC Corona performs...NSWC, Corona and SSP Technical Branch(es). The FTPE, performed every 3 years, is an objective evaluation of facility performance to assure proper

Semantic relatedness for evaluation of course equivalencies

NASA Astrophysics Data System (ADS)

Yang, Beibei

Semantic relatedness, or its inverse, semantic distance, measures the degree of closeness between two pieces of text determined by their meaning. Related work typically measures semantics based on a sparse knowledge base such as WordNet or Cyc that requires intensive manual efforts to build and maintain. Other work is based on a corpus such as the Brown corpus, or more recently, Wikipedia. This dissertation proposes two approaches to applying semantic relatedness to the problem of suggesting transfer course equivalencies. Two course descriptions are given as input to feed the proposed algorithms, which output a value that can be used to help determine if the courses are equivalent. The first proposed approach uses traditional knowledge sources such as WordNet and corpora for courses from multiple fields of study. The second approach uses Wikipedia, the openly-editable encyclopedia, and it focuses on courses from a technical field such as Computer Science. This work shows that it is promising to adapt semantic relatedness to the education field for matching equivalencies between transfer courses. A semantic relatedness measure using traditional knowledge sources such as WordNet performs relatively well on non-technical courses. However, due to the "knowledge acquisition bottleneck," such a resource is not ideal for technical courses, which use an extensive and growing set of technical terms. To address the problem, this work proposes a Wikipedia-based approach which is later shown to be more correlated to human judgment compared to previous work.

CONTACT: An Air Force technical report on military satellite control technology

NASA Astrophysics Data System (ADS)

Weakley, Christopher K.

1993-07-01

This technical report focuses on Military Satellite Control Technologies and their application to the Air Force Satellite Control Network (AFSCN). This report is a compilation of articles that provide an overview of the AFSCN and the Advanced Technology Program, and discusses relevant technical issues and developments applicable to the AFSCN. Among the topics covered are articles on Future Technology Projections; Future AFSCN Topologies; Modeling of the AFSCN; Wide Area Communications Technology Evolution; Automating AFSCN Resource Scheduling; Health & Status Monitoring at Remote Tracking Stations; Software Metrics and Tools for Measuring AFSCN Software Performance; Human-Computer Interface Working Group; Trusted Systems Workshop; and the University Technical Interaction Program. In addition, Key Technology Area points of contact are listed in the report.

Learning to Become a Professional Orchestral Musician: Going beyond Skill and Technique

ERIC Educational Resources Information Center

Hager, Paul; Johnsson, Mary C.

2009-01-01

Current theories of learning hold dominant assumptions about the type and scope of knowledge and skills taught in formal courses that prepare novices for professional practice at work. In performing arts educational contexts, a common emphasis continues to hone individual performance skills in order to gain technical mastery and to differentiate…

Overlapping of duties and technical autonomy among nurses of the Family Health Strategy.

PubMed

Feliciano, Katia Virginia de Oliveira; Kovacs, Maria Helena; Sarinho, Silvia Wanick

2010-06-01

To understand how Estratégia Saúde da Família (Family Health Strategy) nurses experience the overlapping of duties and building of technical autonomy. This was a qualitative study performed with 22 nurses, in the city of Recife, Northeastern Brazil, between August 2005 and November 2006. Based on management evaluation (geographic access; conflicts in the team, between team and district and between team and community; and public violence in the area), four teams were selected in each of the six health districts. Semi-structured interviews were conducted. The main themes in the interview guide were about work expectations and relevance, its organization and process, and feelings towards these practices. The results were interpreted under the perspective of burnout. The nurses' opinion on the excessive number of families, insufficient organizational support and pressures from user demands that had not been met was recurrent. Overlapping of health care and management caused work overload, creating anxiety, impotence, frustration and the feeling of being treated unfairly when tasks were divided among team members. The clinical dimension of practice led to a feeling of insecurity of a technical and ethical nature, in addition to the satisfaction for the power and prestige achieved by the professional category. Specialized medical training represented an obstacle to autonomy and responsibility becoming interdependent. Stress, dissatisfaction, becoming physically and mentally ill, recognition of the relevance of work and importance of one's performance, and low work involvement were reported. In view of the lack of expectation of changes in the short term, the overlapping of low professional satisfaction and work overload causes negative attitudes, indicating the importance of health promotion to increase the possibility of influencing and changing work conditions.

Comparison of the Nature of Work Performed: Southern Land-Grant University Colleges of Agriculture Alumni.

ERIC Educational Resources Information Center

Zekeri, Andrew A.

American agriculture is seriously threatened by growing shortages of highly qualified scientists, managers, and technical professionals. This paper examines the work outcomes of agricultural college alumni who were previously surveyed as students in 1977. Questionnaires were completed by 1,917 graduates in agricultural majors at 1862 and 1890…

Third Grade Students' Performance on Calculator and Calculator-Related Tasks. Technical Report No. 498.

ERIC Educational Resources Information Center

Weaver, J. Fred

Refinements of work with calculator algorithms previously conducted by the author are reported. Work with "chaining" and the doing/undoing property in addition and subtraction was tested with 24 third-grade students. Results indicated the need for further instruction with both ideas. Students were able to manipulate the calculator keyboard, but…

NASA Aerospace Flight Battery Program: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements. Volume 1, Part 2

NASA Technical Reports Server (NTRS)

Jung, David S.; Manzo, Michelle A.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 2 - Volume I: Recommendations for Technical Requirements for Inclusion in Aerospace Battery Procurements of the program's operations.

Final Technical Report for subcontract number B612144

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayali, X.; Marcu, O.

The original statement of work stipulated that the Subcontractor shall perform bacterial and algal cultivation and manipulation, microbe isolation, preparation of samples for sequencing and isotopic analysis, data analysis, and manuscript preparation. The Subcontractor shall work closely with Dr. Mayali and other LLNL scientists, and shall participate in monthly SFA meetings (either in person or by telephone). The Subcontractor shall deliver a final report at the conclusion of the work.

Engine structures: A bibliography of Lewis Research Center's research for 1980-1987

NASA Technical Reports Server (NTRS)

1988-01-01

This compilation of abstracts describes and indexes the technical reporting that resulted from the scientific and engineering work performed and managed by the Structures Division of the NASA Lewis Research Center from 1980 through 1987. All the publications were announced in the l980 to 1987 issues of STAR (Scientific and Technical Aerospace Reports) and or IAA (International Aerospace Abstracts). Included are research reports, journal articles, conference presentations, patents and patent applications, and theses.

How does PET/MR work? Basic physics for physicians.

PubMed

Delso, Gaspar; Ter Voert, Edwin; Veit-Haibach, Patrick

2015-08-01

The aim of this article is to provide Radiologists and Nuclear Medicine physicians the basic information required to understand how PET/MR scanners work, what are their limitations and how to evaluate their performance. It will cover the operational principles of standalone PET and MR imaging, as well as the technical challenges of creating a hybrid system and how they have been solved in the now commercially available scanners. Guidelines will be provided to interpret the main performance figures of hybrid PET/MR systems.

Publications of the Jet Propulsion Laboratory 1976

NASA Technical Reports Server (NTRS)

1977-01-01

The formalized technical reporting, released January through December 1975, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory is described and indexed. The following classes of publications are included: (1) technical reports; (2) technical memorandums; (3) articles from bi-monthly Deep Space Network (DSN) progress report; (4) special publications; and (5) articles published in the open literature. The publications are indexed by: (1) author, (2) subject, and (3) publication type and number. A descriptive entry appears under the name of each author of each publication; an abstract is included with the entry for the primary (first-listed) author. Unless designated otherwise, all publications listed are unclassified.

[Ageing and work: technical standards].

PubMed

De Vito, G; Riva, M A; Meroni, R; Cesana, G C

2010-01-01

Over the last few years, studies on the relationship between ageing and work have attracted growing interest due to the increased probability among workers of developing major health problems as a consequence of ageing of the working population. Negative outcomes for health are possible when an age-related imbalance appears between physical workload and physical work capacity. Interventions based on workload reductions should help to keep workers on the job for as long as allowed by law. Reference masses by age and sex are suggested by the technical standards of the ISO 11228 series, which are also quoted by Italian law D.Lgs. 81/2008, and EN 1005 series, which recommend limits valid also for manual material handling, and pushing and pulling. Decreasing low back pain prevalence or recurrence, in an ageing population with high prevalence of back disorders, could be more effective than many other approaches to enhance workers' quality of life and consequently maintain and improve workers' performance.

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance.

PubMed

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars.

Knowledge-based graphical interfaces for presenting technical information

NASA Technical Reports Server (NTRS)

Feiner, Steven

1988-01-01

Designing effective presentations of technical information is extremely difficult and time-consuming. Moreover, the combination of increasing task complexity and declining job skills makes the need for high-quality technical presentations especially urgent. We believe that this need can ultimately be met through the development of knowledge-based graphical interfaces that can design and present technical information. Since much material is most naturally communicated through pictures, our work has stressed the importance of well-designed graphics, concentrating on generating pictures and laying out displays containing them. We describe APEX, a testbed picture generation system that creates sequences of pictures that depict the performance of simple actions in a world of 3D objects. Our system supports rules for determining automatically the objects to be shown in a picture, the style and level of detail with which they should be rendered, the method by which the action itself should be indicated, and the picture's camera specification. We then describe work on GRIDS, an experimental display layout system that addresses some of the problems in designing displays containing these pictures, determining the position and size of the material to be presented.

Forming a Turbomachinery Seals Working Group: An Overview and Discussion

NASA Technical Reports Server (NTRS)

Proctor, Margaret P.

2007-01-01

Purose: Identify technical challenges to improving turbomachinery seal leakage and wear performance, reliability and cost effectiveness. Develop a coordinated effort to resolve foundational issues for turbomachinery seal technologies. Identify and foster opportunities for collaboration. Advocate for funding.

Teaching in the "Performative" State: Implications for Teacher Appraisal in Australia

ERIC Educational Resources Information Center

Naidu, Sham

2011-01-01

Teacher appraisal is viewed by bureaucrats as a means of effecting organisational change in schools. It is for this reason that educational policy leaders have turned to technical competency as a way of accounting for teachers' performance in classrooms. In other words, teachers' work is now subject to minute scrutiny by the observation of…

Publications and Technical Reports of the United States Army Research Institute of Environmental Medicine, 1961-1992

DTIC Science & Technology

1992-09-30

Human Performance : Vol. 2. Health and Performance . A.P. Smith and D.M. Jones (Eds.), Academic Press, London, 1992. 1214. Matthew, C.B., R.P. Francesconi...Cardinal and Marie E. Stephens 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) B. PERFORMING ORGANIZATION REPORT NUMBER U.S. Army Research...oriented to preserving the health and performance of military personnel in aining and combat. Works cited variously include physiological, biological

Semiannual Technical Report

NASA Technical Reports Server (NTRS)

1997-01-01

This report covers the third six month period of the subject contract from January 26, 1997 to July 26, 1997. The contract statement of work covers four specific applications of Aeromover's 'N'-output differential technology that are being developed in cooperation with industry and NASA. A quantitative description of work, project difficulties, proposed solutions, and a statement of the work that will be performed during the next six months has been included for each of the four projects.

Space platform expendables resupply concept definition study. Volume 3: Work breakdown structure and work breakdown structure dictionary

NASA Technical Reports Server (NTRS)

1984-01-01

The work breakdown structure (WBS) for the Space Platform Expendables Resupply Concept Definition Study is described. The WBS consists of a list of WBS elements, a dictionary of element definitions, and an element logic diagram. The list and logic diagram identify the interrelationships of the elements. The dictionary defines the types of work that may be represented by or be classified under each specific element. The Space Platform Expendable Resupply WBS was selected mainly to support the program planning, scheduling, and costing performed in the programmatics task (task 3). The WBS is neither a statement-of-work nor a work authorization document. Rather, it is a framework around which to define requirements, plan effort, assign responsibilities, allocate and control resources, and report progress, expenditures, technical performance, and schedule performance. The WBS element definitions are independent of make-or-buy decisions, organizational structure, and activity locations unless exceptions are specifically stated.

Age 60 study, part III : consolidated database experiments final report.

DOT National Transportation Integrated Search

1994-10-01

This document is one of four products completed as a part of the Age 60 Rule research contract monitored by Pam Della Rocco, Civil Aerospace Medical Institute, Contracting Officer's Technical Representative. This work was performed. This report was a...

7 CFR 1944.510 - Applicant eligibility.

Code of Federal Regulations, 2011 CFR

2011-01-01

...-income rural families; (e) Have the ability and willingness to work within established guidelines; and (f... capacity, it must either: (1) Have necessary background and experience with proven ability to perform... or administrative experience which indicates an ability to provide responsible technical and...

7 CFR 1944.510 - Applicant eligibility.

Code of Federal Regulations, 2012 CFR

2012-01-01

...-income rural families; (e) Have the ability and willingness to work within established guidelines; and (f... capacity, it must either: (1) Have necessary background and experience with proven ability to perform... or administrative experience which indicates an ability to provide responsible technical and...

FY71 Engineering Report on Surveillance Techniques for Civil Aviation Security

DOT National Transportation Integrated Search

1971-11-01

This document discusses the work performed by the TSC task group on surveillance techniques in FY71. The principal section is devoted to the technical description, classification and evaluation of commercial metal detectors for concealed weapons. It ...

Development of the Transportation Revenue Estimator and Needs Determination System (TRENDS) forecasting model : MPO sub-models and maintenance.

DOT National Transportation Integrated Search

2011-11-01

This report summarizes the technical work performed developing and incorporating Metropolitan Planning : Organization sub-models into the existing Texas Revenue Estimator and Needs Determination System : (TRENDS) model. Additionally, this report expl...

[Acoustic conditions in open plan office - Application of technical measures in a typical room].

PubMed

Mikulski, Witold

2018-03-09

Noise in open plan offices should not exceed acceptable levels for the hearing protection. Its major negative effects on employees are nuisance and impediment in execution of work. Specific technical solutions should be introduced to provide proper acoustic conditions for work performance. Acoustic evaluation of a typical open plan office was presented in the article published in "Medycyna Pracy" 5/2016. None of the rooms meets all the criteria, therefore, in this article one of the rooms was chosen to apply different technical solutions to check the possibility of reaching proper acoustic conditions. Acoustic effectiveness of those solutions was verified by means of digital simulation. The model was checked by comparing the results of measurements and calculations before using simulation. The analyzis revealed that open plan offices supplemented with signals for masking speech signals can meet all the required criteria. It is relatively easy to reach proper reverberation time (i.e., sound absorption). It is more difficult to reach proper values of evaluation parameters determined from A-weighted sound pressure level (SPLA) of speech. The most difficult is to provide proper values of evaluation parameters determined from speech transmission index (STI). Finally, it is necessary (besides acoustic treatment) to use devices for speech masking. The study proved that it is technically possible to reach proper acoustic condition. Main causes of employees complaints in open plan office are inadequate acoustic work conditions. Therefore, it is necessary to apply specific technical solutions - not only sound absorbing suspended ceiling and high acoustic barriers, but also devices for speech masking. Med Pr 2018;69(2):153-165. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

JV Task 120 - Coal Ash Resources Research Consortium Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Debra Pflughoeft-Hassett; Loreal Heebink; David Hassett

2009-03-28

The Coal Ash Resources Research Consortium{reg_sign} (CARRC{reg_sign}, pronounced 'cars') is the core coal combustion product (CCP) research group at the Energy & Environmental Research Center (EERC). CARRC focuses on performing fundamental and applied scientific and engineering research emphasizing the environmentally safe, economical use of CCPs. CARRC member organizations, which include utilities and marketers, are key to developing industry-driven research in the area of CCP utilization and ensuring its successful application. The U.S. Department of Energy is a partner in CARRC through the EERC Jointly Sponsored Research Program, which provides matching funds for industrial member contributions and facilitates an increased levelmore » of effort in CARRC. CARRC tasks were designed to provide information on CCP performance, including environmental performance, engineering performance, favorable economics, and improved life cycle of products and projects. CARRC technical research tasks are developed based on member input and prioritization. CARRC special projects are developed with members and nonmembers to provide similar information and to support activities, including the assembly and interpretation of data, support for standards development and technology transfer, and facilitating product development and testing. CARRC activities from 2007 to 2009 included a range of research tasks, with primary work performed in laboratory tasks developed to answer specific questions or evaluate important fundamental properties of CCPs. The tasks were included in four categories: (1) Environmental Evaluations of CCPs; (2) Evaluation of Impacts on CCPs from Emission Controls; (3) Construction and Product-Related Activities; and (4) Technology Transfer and Maintenance Tasks. All tasks are designed to work toward achieving the CARRC overall goal and supporting objectives. The various tasks are coordinated in order to provide broad and useful technical data for CARRC members. Special projects provide an opportunity for non-CARRC members to sponsor specific research or technology transfer consistent with CARRC goals. This report covers CARRC activities from January 2007 through March 2009. These activities have been reported in CARRC Annual Reports and in member meetings over the past 2 years. CARRC continues to work with industry and various government agencies with its research, development, demonstration, and promotional activities nearing completion at the time of submission of this report. CARRC expects to continue its service to the coal ash industry in 2009 and beyond to work toward the common goal of advancing coal ash utilization by solving CCP-related technical issues and promoting the environmentally safe, technically sound, and economically viable management of these complex and changing materials.« less

Lessons for surgeons in the final moments of Air France Flight 447.

PubMed

Bhangu, Aneel; Bhangu, Sonia; Stevenson, James; Bowley, Douglas M

2013-06-01

All surgeons make mistakes, and learning from critical incidents may help improve performance. The present study aimed to highlight lessons for surgeons from analysis of the final moments of Air France Flight 447. All of the authors work in teams and situations where safety, technical performance, and non-technical skills are critical. This review was born out of discussions regarding the events of Flight 447; specifically, whether the airline disaster was relevant to their work, and whether they could learn anything from it. The study is based on review of the crash reports of Flight 447, which lost flight speed indication after formation of ice prevented air from entering flight speed indicators during a storm. Following a subsequent stall, the aircraft fell at a rate of >10,000 feet/min until it crashed into the Atlantic Ocean, killing 228 passengers and crew. There were errors in decision making, reasoning, communication, and teamwork. Such non-technical skills failures have been recognized previously and can be addressed by existing non-technical skills training. A reliance on autopilot meant that the pilots were unfamiliar with high-altitude flying when the autopilot is disengaged. They were unprepared for and affected by such a sudden and serious problem; an event called "surprise and startle" by the accident investigation. The absence of the senior pilot (who was on a scheduled break) in the critical final minutes slowed error recognition and recovery. Unintended consequences of modern safety strategies may be under-recognized and can lead to adverse events. Both simulation-based and non-simulation-based training should include "surprise and startle" events beyond the scenarios trainees might expect. Likewise, in the face of increasing reliance on modern technology, surgeons should ensure that they would be able to perform procedures in the absence of such technologies. Specific training may improve surgeons' non-technical skills, and recognition of such skills could also be used to help select future surgeons.

Work Measurement as a Generalized Quantum Measurement

NASA Astrophysics Data System (ADS)

Roncaglia, Augusto J.; Cerisola, Federico; Paz, Juan Pablo

2014-12-01

We present a new method to measure the work w performed on a driven quantum system and to sample its probability distribution P (w ). The method is based on a simple fact that remained unnoticed until now: Work on a quantum system can be measured by performing a generalized quantum measurement at a single time. Such measurement, which technically speaking is denoted as a positive operator valued measure reduces to an ordinary projective measurement on an enlarged system. This observation not only demystifies work measurement but also suggests a new quantum algorithm to efficiently sample the distribution P (w ). This can be used, in combination with fluctuation theorems, to estimate free energies of quantum states on a quantum computer.

What effects have resident work-hour changes had on education, quality of life, and safety? A systematic review.

PubMed

Harris, Joshua D; Staheli, Greg; LeClere, Lance; Andersone, Diana; McCormick, Frank

2015-05-01

More than 15 years ago, the Institute of Medicine (IOM) identified medical error as a problem worthy of greater attention; in the wake of the IOM report, numerous changes were made to regulations to limit residents' duty hours. However, the effect of resident work-hour changes remains controversial within the field of orthopaedics. We performed a systematic review to determine whether work-hour restrictions have measurably influenced quality-of-life measures, operative and technical skill development, resident surgical education, patient care outcomes (including mortality, morbidity, adverse events, sentinel events, complications), and surgeon and resident attitudes (such as perceived effect on learning and training experiences, personal benefit, direct clinical experience, clinical preparedness). We performed a systematic review of PubMed, Scopus, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and Google Scholar using PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. Inclusion criteria were any English language peer-reviewed articles that analyzed the effect(s) of orthopaedic surgery resident work-hour restrictions on patient safety, resident education, resident/surgeon quality of life, resident technical operative skill development, and resident surgeon attitudes toward work-hour restrictions. Eleven studies met study inclusion criteria. One study was a prospective analysis, whereas 10 studies were of level IV evidence (review of surgical case logs) or survey results. Within our identified studies, there was some support for improved resident quality of life, improved resident sleep and less fatigue, a perceived negative impact on surgical operative and technical skill, and conflicting evidence on the topic of resident education, patient outcomes, and variable attitudes toward the work-hour changes. There is a paucity of high-level or clear evidence evaluating the effect of the changes to resident work hours. Future research in this area should focus on objective measures that include patient safety as a primary outcome.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Gary E.; Hennen, Matthew J.; Zimmerman, Shon A.

The study reported herein was conducted by the Pacific Northwest National Laboratory (PNNL) and the University of Washington (UW) for the U.S. Army Corps of Engineers, Portland District (USACE). The PNNL and UW project managers were Drs. Thomas J. Carlson and John R. Skalski, respectively. The USACE technical lead was Mr. Brad Eppard. The study was designed to estimate dam passage survival and other performance measures at The Dalles Dam as stipulated by the 2008 Federal Columbia River Power System Biological Opinion (BiOp) and the 2008 Columbia Basin Fish Accords. The study is being documented in two types of reports:more » compliance and technical. A compliance report is delivered within 6 months of the completion of the field season and focuses on results of the performance metrics outlined in the 2008 BiOp and Fish Accords. A technical report is produced within the 18 months after field work, providing comprehensive documentation of a given study and results on route-specific survival estimates and fish passage distributions, which are not included in compliance reports. This technical report concerns the 2011 acoustic telemetry study at The Dalles Dam.« less

Performance characteristics of long-track speed skaters: a literature review.

PubMed

Konings, Marco J; Elferink-Gemser, Marije T; Stoter, Inge K; van der Meer, Dirk; Otten, Egbert; Hettinga, Florentina J

2015-04-01

Speed skating is an intriguing sport to study from different perspectives due to the peculiar way of motion and the multiple determinants for performance. This review aimed to identify what is known on (long-track) speed skating, and which individual characteristics determine speed skating performance. A total of 49 studies were included. Based on a multidimensional performance model, person-related performance characteristics were categorized in anthropometrical, technical, physiological, tactical, and psychological characteristics. Literature was found on anthropometry, technique, physiology, and tactics. However, psychological studies were clearly under-represented. In particular, the role of self-regulation might deserve more attention to further understand mechanisms relevant for optimal performance and for instance pacing. Another remarkable finding was that the technically/biomechanically favourable crouched skating technique (i.e. small knee and trunk angle) leads to a physiological disadvantage: a smaller knee angle may increase the deoxygenation of the working muscles. This is an important underlying aspect for the pacing tactics in speed skating. Elite speed skaters need to find the optimal balance between obtaining a fast start and preventing negative technical adaptations later on in the race by distributing their available energy over the race in an optimal way. More research is required to gain more insight into how this impacts on the processes of fatigue and coordination during speed skating races. This can lead to a better understanding on how elite speed skaters can maintain the optimal technical characteristics throughout the entire race, and how they can adapt their pacing to optimize all identified aspects that determine performance.

High Efficiency Centrifugal Compressor for Rotorcraft Applications

NASA Technical Reports Server (NTRS)

Medic, Gorazd; Sharma, Om P.; Jongwook, Joo; Hardin, Larry W.; McCormick, Duane C.; Cousins, William T.; Lurie, Elizabeth A.; Shabbir, Aamir; Holley, Brian M.; Van Slooten, Paul R.

2017-01-01

A centrifugal compressor research effort conducted by United Technologies Research Center under NASA Research Announcement NNC08CB03C is documented. The objectives were to identify key technical barriers to advancing the aerodynamic performance of high-efficiency, high work factor, compact centrifugal compressor aft-stages for turboshaft engines; to acquire measurements needed to overcome the technical barriers and inform future designs; to design, fabricate, and test a new research compressor in which to acquire the requisite flow field data. A new High-Efficiency Centrifugal Compressor stage -- splittered impeller, splittered diffuser, 90 degree bend, and exit guide vanes -- with aerodynamically aggressive performance and configuration (compactness) goals were designed, fabricated, and subquently tested at the NASA Glenn Research Center.

Aerodynamic flight control to increase payload capability of future launch vehicles

NASA Technical Reports Server (NTRS)

Cochran, John E., Jr.

1995-01-01

The development of new launch vehicles will require that designers use innovative approaches to achieve greater performance in terms of pay load capability. The objective of the work performed under this delivery order was to provide technical assistance to the Contract Officer's Technical Representative (COTR) in the development of ideas and concepts for increasing the payload capability of launch vehicles by incorporating aerodynamic controls. Although aerodynamic controls, such as moveable fins, are currently used on relatively small missiles, the evolution of large launch vehicles has been moving away from aerodynamic control. The COTR reasoned that a closer investigation of the use of aerodynamic controls on large vehicles was warranted.

Manufacturing Technology for Apparel Automation. Phases 1 and 2.

DTIC Science & Technology

1987-07-15

Modularized Work Unit Groups . . . . . . . 12 i +,. :.Aooesston For :".. NTIS GR.AA1 ’- " "D T I C T A B Unannounced [] ~Justification i Availability...The monthly interim reports are summarized in this semiannual report. Activity to date has included work performed by Ms. Carol Carrere Dr. T. G. Clapp...Management. Provide, in accordance with paragraph 3.1 of the Statement of Work (SOW), North Carolina State University’s Technical Proposal, Manufacturing

FY 1986 current fiscal year work plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office/RI during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, task guidance development, taskmore » monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. System models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less

Enabling Music and Journalism Students to Respond Positively to Adversity in Work after Graduation: A Reconsideration of Conventional Pedagogies

ERIC Educational Resources Information Center

Latukefu, Lotte; Burns, Shawn; O'Donnell, Marcus; Whelan, Andrew

2014-01-01

Elite classical music programs continue to focus teaching in Western Classical traditions where the emphasis is on technical virtuosity in instrumental or vocal performance. In this paper we discuss group activities and assessments used in two Creative Arts disciplines (Performance and Journalism), at an Australian regional university, as examples…

A State-of-the-Art Review of Techniques and Procedures for the Measurement of Complex Human Performance. Consulting Report.

ERIC Educational Resources Information Center

Fink, C. Dennis; And Others

Recent efforts to assess complex human performances in various work settings are reviewed. The review is based upon recent psychological, educational, and industrial literature, and technical reports sponsored by the military services. A few selected military and industrial locations were also visited in order to learn about current research and…

The contribution of Raman spectroscopy to the analytical quality control of cytotoxic drugs in a hospital environment: eliminating the exposure risks for staff members and their work environment.

PubMed

Bourget, Philippe; Amin, Alexandre; Vidal, Fabrice; Merlette, Christophe; Troude, Pénélope; Baillet-Guffroy, Arlette

2014-08-15

The purpose of the study was to perform a comparative analysis of the technical performance, respective costs and environmental effect of two invasive analytical methods (HPLC and UV/visible-FTIR) as compared to a new non-invasive analytical technique (Raman spectroscopy). Three pharmacotherapeutic models were used to compare the analytical performances of the three analytical techniques. Statistical inter-method correlation analysis was performed using non-parametric correlation rank tests. The study's economic component combined calculations relative to the depreciation of the equipment and the estimated cost of an AQC unit of work. In any case, analytical validation parameters of the three techniques were satisfactory, and strong correlations between the two spectroscopic techniques vs. HPLC were found. In addition, Raman spectroscopy was found to be superior as compared to the other techniques for numerous key criteria including a complete safety for operators and their occupational environment, a non-invasive procedure, no need for consumables, and a low operating cost. Finally, Raman spectroscopy appears superior for technical, economic and environmental objectives, as compared with the other invasive analytical methods. Copyright © 2014 Elsevier B.V. All rights reserved.

Teamwork in Task Analysis. Training Manual V. Evaluation of the Marine Corps Task Analysis Program. Technical Report No. 9.

ERIC Educational Resources Information Center

Kuriloff, Arthur H.; Yoder, Dale

This training manual provides guidelines for effective teamwork and work-team maintenance and development. It was designed for use in the Marine Corps Task Analysis program, in which staff members are organized to form a work-team whose continuing performance as an effective team is crucial for success of the project. Chapter 1, the major portion…

Annual Report of the National Science Foundation on Contract NSF-C414 Task III July 1966 through June 1967.

ERIC Educational Resources Information Center

American Chemical Society, Columbus, OH. Chemical Abstracts Service.

This Annual Report describes in detail the work performed during the first year of Task III of Contract NSF-C414 and the present status of Task III work. The programs and achievements described constitute the first significant efforts to develop a user-oriented, cooperative program between major secondary scientific and technical information…

Technical match characteristics and influence of body anthropometry on playing performance in male elite team handball.

PubMed

Michalsik, Lars Bojsen; Madsen, Klavs; Aagaard, Per

2015-02-01

Modern team handball match-play imposes substantial physical and technical demands on elite players. However, only limited knowledge seems to exist about the specific working requirements in elite team handball. Thus, the purpose of this study was to examine the physical demands imposed on male elite team handball players in relation to playing position and body anthropometry. Based on continuous video recording of individual players during elite team handball match-play (62 tournament games, ∼4 players per game), computerized technical match analysis was performed in male elite team handball players along with anthropometric measurements over a 6 season time span. Technical match activities were distributed in 6 major types of playing actions (shots, breakthroughs, fast breaks, tackles, technical errors, and defense errors) and further divided into various subcategories (e.g., hard or light tackles, type of shot, claspings, screenings, and blockings). Players showed 36.9 ± 13.1 (group mean ± SD) high-intense technical playing actions per match with a mean total effective playing time of 53.85 ± 5.87 minutes. In offense, each player performed 6.0 ± 5.2 fast breaks, received 34.5 ± 21.3 tackles in total, and performed in defense 3.7 ± 3.5 blockings, 3.9 ± 3.0 claspings, and 5.8 ± 3.6 hard tackles. Wing players (84.5 ± 5.8 kg, 184.9 ± 5.7 cm) were less heavy and smaller (p < 0.001) than backcourt players (94.7 ± 7.1 kg, 191.9 ± 5.4 cm) and pivots (99.4 ± 6.2 kg, 194.8 ± 3.6 cm). In conclusion, modern male elite team handball match-play is characterized by a high number of short-term, high-intense intermittent technical playing actions. Indications of technical fatigue were observed. Physical demands differed between playing positions with wing players performing more fast breaks and less physical confrontations with opponent players than backcourt players and pivots. Body anthropometry seemed to have an important influence on playing performance because it is highly related to playing positions. The present observations suggest that male elite team handball players should implement more position-specific training regimens, while also focusing on anaerobic training and strength training.

Steady and unsteady three-dimensional transonic flow computations by integral equation method

NASA Technical Reports Server (NTRS)

Hu, Hong

1994-01-01

This is the final technical report of the research performed under the grant: NAG1-1170, from the National Aeronautics and Space Administration. The report consists of three parts. The first part presents the work on unsteady flows around a zero-thickness wing. The second part presents the work on steady flows around non-zero thickness wings. The third part presents the massively parallel processing implementation and performance analysis of integral equation computations. At the end of the report, publications resulting from this grant are listed and attached.

20 CFR 627.422 - Selection of service providers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... operational controls; and (7) The technical skills to perform the work. (e) In selecting service providers to... community-based organizations (section 107(a)). These community-based organizations, including women's organizations with knowledge about or experience in nontraditional training for women, shall be organizations...

ICU staffing: identification and survey of staff involved in providing technical support services to Australian and New Zealand intensive care units.

PubMed

Carter, B G; Kiraly, N; Hochmann, M; Stephens, R; Osborne, A

2007-04-01

We conducted a survey of all (200) Australian and New Zealand intensive care units to determine the presence and nature of staff employed in a technical support role. Specifically, we attempted to identify staff who are formally employed in a role where they are directly responsible for the equipment used in intensive care. Of 130 returned surveys, 80 units (62%) reported not having any personnel in this role. In these units technical tasks were most commonly performed by registered nurses (79%) but were also performed by a variety of other personnel. Fifty units (38%), consisting of approximately 105 individuals providing a total of 84.3 EFTs and most commonly in public (84%) or metropolitan (70%) hospitals or level 3 (64%) intensive care units, did have one or more staff acting in a formal technical support role. The most common groups filling the technical support role were nurses (42%), technicians (24%), biomedical engineers (10%) and technologists (6%). The most common duties performed were equipment troubleshooting (92%), training (80%), equipment evaluation (80%), ordering supplies (77%), consumable evaluation (75%), equipment cleaning (73%), delivery of supplies (70%), handling product recalls (65%), equipment maintenance (65%) and sitting on hospital committees (52%). This is the first attempt to identify and understand the technical support role in Australian and New Zealand intensive care units. Numerous issues remain and future work will hopefully add to our findings, with the possibility of formal recognition of the role, training and/or accreditation and its extension into other hospital departments.

The Future Cybersecurity Workforce: Going Beyond Technical Skills for Successful Cyber Performance

PubMed Central

Dawson, Jessica; Thomson, Robert

2018-01-01

One of the challenges in writing an article reviewing the current state of cyber education and workforce development is that there is a paucity of quantitative assessment regarding the cognitive aptitudes, work roles, or team organization required by cybersecurity professionals to be successful. In this review, we argue that the people who operate within the cyber domain need a combination of technical skills, domain specific knowledge, and social intelligence to be successful. They, like the networks they operate, must also be reliable, trustworthy, and resilient. Defining the knowledge, skills, attributes, and other characteristics is not as simple as defining a group of technical skills that people can be trained on; the complexity of the cyber domain makes this a unique challenge. There has been little research devoted to exactly what attributes individuals in the cyber domain need. What research does exist places an emphasis on technical and engineering skills while discounting the important social and organizational influences that dictate success or failure in everyday settings. This paper reviews the literature on cyber expertise and cyber workforce development to identify gaps and then argues for the important contribution of social fit in the highly complex and heterogenous cyber workforce. We then identify six assumptions for the future of cybersecurity workforce development, including the requirement for systemic thinkers, team players, a love for continued learning, strong communication ability, a sense of civic duty, and a blend of technical and social skill. Finally, we make recommendations for social and cognitive metrics which may be indicative of future performance in cyber work roles to provide a roadmap for future scholars. PMID:29946276

Improving care by understanding the way we work: human factors and behavioural science in the context of intensive care

PubMed Central

Sevdalis, Nick; Brett, Stephen J

2009-01-01

Effectiveness and efficiency of care of the critically ill patient are subject to a number of systemic influences, including skills of individual physicians/nurses (technical and non-technical), team-working in the intensive care unit (ICU), and the ICU environment. We first discuss the paper of Fackler and colleagues as a contribution to the systems approach to clinical performance in the context of intensive care. We then highlight features of care delivery that are unique to intensive care and discuss the need for better understanding of human and non-human elements of the system of care of the critically ill patient as a driver for improvement of care delivery. PMID:19439048

"Circadian cortical compensation": a longitudinal study of brain function during technical and cognitive skills in acutely sleep-deprived surgical residents.

PubMed

Leff, Daniel Richard; Orihuela-Espina, Felipe; Athanasiou, Thanos; Karimyan, Vahe; Elwell, Clare; Wong, John; Yang, Guang-Zhong; Darzi, Ara W

2010-12-01

To test the hypothesis that fatigue-induced performance decline in surgical residents is associated with changes in brain function as detected by functional near-infrared spectroscopy. Surgical residents (n = 7) participated in a prospective study involving 2-hourly objective measurements of neurocognitive skill (arithmetic calculations using Nintendo "brain training"), technical performance (surgical knot tying on a trainer, and monitoring time taken, path length and number of movements), and introspective fatigue (questionnaire-based) across 10 hours of acute sleep deprivation (10:00 PM to 8:00 PM. Simultaneously, changes in cortical oxyhemoglobin (HbO₂), deoxyhemoglobin (HHb), and total hemoglobin (HbT), inferring prefrontal function, were recorded by using functional near-infrared spectroscopy. Arithmetic performance remained stable despite increasing levels of subject fatigue (time: P = 0.07, errors: P = 0.70, efficiency: P = 0.58). Technical skill improved between the first (10:00 PM and the second (12:00 AM sessions (P < 0.05) and stabilized thereafter (12:00 AM to 8:00 AM. Greater activation was required to complete cognitive versus technical drills. Stimulus type (0: cognitive, 1: technical) was found to be an independent predictor of changes in cortical excitation (HbO₂: P < 0.01, HHb: P < 0.05, HbT: P < 0.01). Cortical responses to the cognitive task increased over the course of the simulated night shift. In addition, "time interval" was observed to be an independent predictor of cortical hemodynamic change (HbO₂: P < 0.01, HbT: P < 0.01). Neurocognitive tasks may tax the sleep-deprived resident more than well-learned technical skills. Performing cognitive skills at night, such as decision making, may depend upon enhanced prefrontal recruitment indicative of a focused attentional strategy and/or compensation to sleep deprivation. Further work should focus on determining whether errors in performance are associated with attentional lapses and failure of cortical compensation.

Users perspectives on interactive distance technology enabling home-based motor training for stroke patients.

PubMed

Ehn, Maria; Hansson, Pär; Sjölinder, Marie; Boman, Inga-Lill; Folke, Mia; Sommerfeld, Disa; Borg, Jörgen; Palmcrantz, Susanne

2015-01-01

The aim of this work has been to develop a technical support enabling home-based motor training after stroke. The basis for the work plan has been to develop an interactive technical solution supporting three different groups of stroke patients: (1) patients with stroke discharged from hospital with support from neuro team; (2) patients with stroke whose support from neuro team will be phased out and (3) patients living with impaired motor functions long-term. The technology has been developed in close collaboration with end-users using a method earlier evaluated and described [12]. This paper describes the main functions of the developed technology. Further, results from early user-tests with end-users, performed to identify needs for improvements to be carried out during further technical development. The developed technology will be tested further in a pilot study of the safety and, usefulness of the technology when applied as a support for motor training in three different phases of the post-stroke rehabilitation process.

Design for effective development and prototyping of the HL-20

NASA Astrophysics Data System (ADS)

Urie, David M.; Floreck, Paul A.; McMorris, John A.; Elvin, John D.

1993-10-01

A feasibility study of the HL-20 personnel launch system (PLS) concept was conducted by a team which focused on creating a PLS design approach and an accelerated development plan consistent with the historical 'Skunk Works' approach to rapid prototyping. Technical design, manufacturing, system testing, and operations and support elements of the predefined baseline concept were evaluated. An initial phase program, featuring a concurrent system test during design and development, leading to the orbital flight of an unmanned HL-20 prototype on a Titan III launch system, was prescribed. A second-phase development and manufacturing plan leading to system operational status was also formulated. Baseline design feature modifications were made when necessary, without compromise to performance, to satisfy the prototype development plan. Technical design details and off-the-shelf hardware candidates were also identified for several subsystems, including the launch-system interface adapter/emergency escape system. The technical feasibility of the system and applicability of the Skunk Works approach to development of the HL-20/PLS were verified.

Impact of sleep deprivation on anaesthesia residents' non-technical skills: a pilot simulation-based prospective randomized trial.

PubMed

Neuschwander, A; Job, A; Younes, A; Mignon, A; Delgoulet, C; Cabon, P; Mantz, J; Tesniere, A

2017-07-01

Sleep deprivation is common in anaesthesia residents, but its impact on performance remains uncertain. Non-technical skills (team working, situation awareness, decision making, and task management) are key components of quality of care in anaesthesia, particularly in crisis situations occurring in the operating room. The impact of sleep deprivation on non-technical skills is unknown. We tested the hypothesis that in anaesthesia residents sleep deprivation is associated with impaired non-technical skills. Twenty anaesthesia residents were randomly allocated to undergo a simulation session after a night shift [sleep-deprived (SLD) group, n =10] or after a night of rest [rested (R) group, n =10] from January to March 2015. The simulated scenario was a situation of crisis management in the operating room. The primary end point was a composite score of anaesthetists' non-technical skills (ANTS) assessed by two blinded evaluators. Non-technical skills were significantly impaired in the SLD group [ANTS score 12.2 (interquartile range 10.5-13)] compared with the R group [14.5 (14-15), P <0.02]. This difference was mainly accounted for by a difference in the team working item. On the day of simulation, the SLD group showed increased sleepiness and decreased confidence in anaesthesia skills. In this randomized pilot trial, sleep deprivation was associated with impaired non-technical skills of anaesthesia residents in a simulated anaesthesia intraoperative crisis scenario. NCT02622217. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Off-road axle detection sensor (ORADS) : occlusion feasibility study, final technical report, 27 August, 1997.

DOT National Transportation Integrated Search

1997-08-27

The work accomplished under this initiative is in direct relation to the development effort proposed by Spectra : Research, Inc. (S*R) for an "Off-Road Axle Detection Sensor (ORADS)". The feasibility study was performed to : investigate potential occ...

Evaluation of dowel bar alignment and effect on long-term performance of jointed concrete pavement.

DOT National Transportation Integrated Search

2013-09-01

Recent concerns of misaligned dowel bars led to a technical assistance project : to investigate the roadways in question using a MIT-SCAN-2 device borrowed : from the Federal Highway Administration (FHWA). The device worked extremely : well, and the ...

7 CFR 1775.20 - Reporting.

Code of Federal Regulations, 2010 CFR

2010-01-01

... (CONTINUED) TECHNICAL ASSISTANCE GRANTS Grant Application Processing § 1775.20 Reporting. (a) Grantees shall constantly monitor performance to ensure that time schedules are being met, projected work by time periods is..., results of activity); (2) Analysis of challenges or setbacks that occurred during the grant period; (3...

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Hold an earned doctoral or master's degree in a chemical, physical, biological or clinical laboratory... degree in a chemical, physical or biological science or medical technology from an accredited institution... biology and additionally has documentation of 2 years of work experience performing tests of moderate...

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Hold an earned doctoral or master's degree in a chemical, physical, biological or clinical laboratory... degree in a chemical, physical or biological science or medical technology from an accredited institution... biology and additionally has documentation of 2 years of work experience performing tests of moderate...

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Hold an earned doctoral or master's degree in a chemical, physical, biological or clinical laboratory... degree in a chemical, physical or biological science or medical technology from an accredited institution... biology and additionally has documentation of 2 years of work experience performing tests of moderate...

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Hold an earned doctoral or master's degree in a chemical, physical, biological or clinical laboratory... degree in a chemical, physical or biological science or medical technology from an accredited institution... biology and additionally has documentation of 2 years of work experience performing tests of moderate...

[Exploratory analysis of work engagement: use of the Utrecht scale in Benin].

PubMed

Ahanhanzo, Yolaine Glèlè; Kittel, France; Paraïso, Noël Moussiliou; Godin, Isabelle; Wilmet-Dramaix, Michèle; Makoutodé, Michel

2014-01-01

Work engagement, an emerging concept in the field of positive psychology in the workplace is not well known in developing countries. Defined as a positive and and fulfilling mindset related to work, it recalls a positive attitude incentive of performance and need to be investigated. In the context of the socioeconomic crisis of health workers, and with the chronic issue of poor quality of data, this study was designed to identify the factors associated with work engagement among health workers. in charge of data collection in the Benin Routine Health Information System. This study was a cross-sectional and analytical study targeting health workers in charge of data collection in public and private health centres. The dependent variable was work engagement and independent variables were sociodemographic and professional features, personal and professional resources and perception of technical factors. Logistic regression was used. The adequacy of the model was tested with the Hosmer-Lemeshow goodness of fit test. The results indicate that the level of work engagement is similar with that observed in previous studies. Predictors identified in logistic regression are perception of technical factors, location of the job, and personal resources, such as level of effort and overcommitment. This study identified factors associated with work engagement in a developing country, and adds to the knowledge concerning this new concept in Benin. The findings can contribute to research for improvement of human resources management in the health sector to achieve real performance and development.

Anesthesiologists' perceptions of minimum acceptable work habits of nurse anesthetists.

PubMed

Logvinov, Ilana I; Dexter, Franklin; Hindman, Bradley J; Brull, Sorin J

2017-05-01

Work habits are non-technical skills that are an important part of job performance. Although non-technical skills are usually evaluated on a relative basis (i.e., "grading on a curve"), validity of evaluation on an absolute basis (i.e., "minimum passing score") needs to be determined. Survey and observational study. None. None. The theme of "work habits" was assessed using a modification of Dannefer et al.'s 6-item scale, with scores ranging from 1 (lowest performance) to 5 (highest performance). E-mail invitations were sent to all consultant and fellow anesthesiologists at Mayo Clinic in Florida, Arizona, and Minnesota. Because work habits expectations can be generational, the survey was designed for adjustment based on all invited (responding or non-responding) anesthesiologists' year of graduation from residency. The overall mean±standard deviation of the score for anesthesiologists' minimum expectations of nurse anesthetists' work habits was 3.64±0.66 (N=48). Minimum acceptable scores were correlated with the year of graduation from anesthesia residency (linear regression P=0.004). Adjusting for survey non-response using all N=207 anesthesiologists, the mean of the minimum acceptable work habits adjusted for year of graduation was 3.69 (standard error 0.02). The minimum expectations for nurse anesthetists' work habits were compared with observational data obtained from the University of Iowa. Among 8940 individual nurse anesthetist work habits scores, only 2.6% were <3.69. All N=65 of the Iowa nurse anesthetists' mean work habits scores were significantly greater than the Mayo estimate (3.69) for the minimum expectations; all P<0.00024. Our results suggest that routinely evaluated work habits of nurse anesthetists within departments should not be compared with an appropriate minimum score (i.e., of 3.69). Instead, work habits scores should be analyzed based on relative reporting among anesthetists. Copyright © 2017 Elsevier Inc. All rights reserved.

Excess Weapons Plutonium Immobilization in Russia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jardine, L.; Borisov, G.B.

2000-04-15

The joint goal of the Russian work is to establish a full-scale plutonium immobilization facility at a Russian industrial site by 2005. To achieve this requires that the necessary engineering and technical basis be developed in these Russian projects and the needed Russian approvals be obtained to conduct industrial-scale immobilization of plutonium-containing materials at a Russian industrial site by the 2005 date. This meeting and future work will provide the basis for joint decisions. Supporting R&D projects are being carried out at Russian Institutes that directly support the technical needs of Russian industrial sites to immobilize plutonium-containing materials. Special R&Dmore » on plutonium materials is also being carried out to support excess weapons disposition in Russia and the US, including nonproliferation studies of plutonium recovery from immobilization forms and accelerated radiation damage studies of the US-specified plutonium ceramic for immobilizing plutonium. This intriguing and extraordinary cooperation on certain aspects of the weapons plutonium problem is now progressing well and much work with plutonium has been completed in the past two years. Because much excellent and unique scientific and engineering technical work has now been completed in Russia in many aspects of plutonium immobilization, this meeting in St. Petersburg was both timely and necessary to summarize, review, and discuss these efforts among those who performed the actual work. The results of this meeting will help the US and Russia jointly define the future direction of the Russian plutonium immobilization program, and make it an even stronger and more integrated Russian program. The two objectives for the meeting were to: (1) Bring together the Russian organizations, experts, and managers performing the work into one place for four days to review and discuss their work with each other; and (2) Publish a meeting summary and a proceedings to compile reports of all the excellent Russian plutonium immobilization contract work. This proceedings document presents the wide extent of Russian immobilization activities, provides a reference for their work, and makes it available to others.« less

Nuclear Propulsion Technical Interchange Meeting, volume 1

NASA Technical Reports Server (NTRS)

1993-01-01

The Nuclear Propulsion Technical Interchange Meeting (NP-TIM-92) was sponsored and hosted by the Nuclear Propulsion Office at the NASA Lewis Research Center. The purpose of the meeting was to review the work performed in fiscal year 1992 in the areas of nuclear thermal and nuclear electric propulsion technology development. These proceedings are a compilation of the presentations given at the meeting (many of the papers are presented in outline or viewgraph form). Volume 1 covers the introductory presentations and the system concepts and technology developments related to nuclear thermal propulsion.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Very Large-Scale Multiuser Detection (VLSMUD)

DTIC Science & Technology

2006-09-01

networks: A market -based approach,” IEEE/ACM Transactions on Networking, vol. 13, no. 6, pp. 1325– 1338, December 2005. [5] F. Meshkati, H. V. Poor, S . C... s / / s / DAVID HENCH WARREN H. DEBANY, Jr. Work Unit Manager Technical Advisor, Information Grid Division...5e. TASK NUMBER UD 6. AUTHOR( S ) H. Vincent Poor 5f. WORK UNIT NUMBER 01 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Princeton

Multi-Level Modeling of Complex Socio-Technical Systems - Phase 1

DTIC Science & Technology

2013-06-06

is to detect anomalous organizational outcomes, diagnose the causes of these anomalies , and decide upon appropriate compensation schemes. All of...monitor process outcomes. The purpose of this monitoring is to detect anomalous process outcomes, diagnose the causes of these anomalies , and decide upon...monitor work outcomes in terms of performance. The purpose of this monitoring is to detect anomalous work outcomes, diagnose the causes of these anomalies

16 CFR 1406.5 - Performance and technical data to be furnished to the Commission.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Commission the following performance and technical data related to performance and safety. (a) Written notice... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Performance and technical data to be... TECHNICAL DATA § 1406.5 Performance and technical data to be furnished to the Commission. Manufacturers...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

16 CFR 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

Support of NASA quality requirements by defense contract administration services regions

NASA Technical Reports Server (NTRS)

Farrar, Hiram D.

1966-01-01

Defense Contract Administration Services Regions (DCASR) quality assurance personnel performing under NASA Letters of Delegation must work closely with the assigned technical representative of the NASA centers. It is realized that technical personnel from the NASA Centers cannot make on-site visits as frequently as they would like to. However, DCASR quality assurance personnel would know the assigned NASA technical representative and should contact him when problems arise. The technical representative is the expert on the hardware and should be consulted on any problem area. It is important that the DCASR quality assurance personnel recommend to the delegating NASA Center any new or improved methods of which they may be aware which would assist in achieving the desired quality and reliability in NASA hardware. NASA expects assignment of competent personnel in the Quality Assurance functional area and is not only buying the individual's technical skill, but also his experience. Suggestions by field personnel can many times up-grade the quality or the hardware.

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2012 CFR

2012-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2011 CFR

2011-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2013 CFR

2013-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 2052.215-71 - Project officer authority.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of the work description. (3) Review and, where required by the contract, approve technical reports... subject to the technical direction of the NRC project officer. The term technical direction is defined to include the following: (1) Technical direction to the contractor which shifts work emphasis between areas...

48 CFR 1852.219-82 - Limitation on subcontracting-STTR program.

Code of Federal Regulations, 2014 CFR

2014-10-01

... performed by the research institution. Since the selection of R&D contractors is substantially based on the best scientific and technological sources, it is important that the Contractor not subcontract technical or scientific work without the Contracting Officer's advance approval. (End of clause) [71 FR...

48 CFR 1852.219-82 - Limitation on subcontracting-STTR program.

Code of Federal Regulations, 2011 CFR

2011-10-01

... performed by the research institution. Since the selection of R&D contractors is substantially based on the best scientific and technological sources, it is important that the Contractor not subcontract technical or scientific work without the Contracting Officer's advance approval. (End of clause) [71 FR...

48 CFR 1852.219-82 - Limitation on subcontracting-STTR program.

Code of Federal Regulations, 2010 CFR

2010-10-01

... performed by the research institution. Since the selection of R&D contractors is substantially based on the best scientific and technological sources, it is important that the Contractor not subcontract technical or scientific work without the Contracting Officer's advance approval. (End of clause) [71 FR...

48 CFR 1852.219-82 - Limitation on subcontracting-STTR program.

Code of Federal Regulations, 2013 CFR

2013-10-01

... performed by the research institution. Since the selection of R&D contractors is substantially based on the best scientific and technological sources, it is important that the Contractor not subcontract technical or scientific work without the Contracting Officer's advance approval. (End of clause) [71 FR...

48 CFR 1852.219-82 - Limitation on subcontracting-STTR program.

Code of Federal Regulations, 2012 CFR

2012-10-01

... performed by the research institution. Since the selection of R&D contractors is substantially based on the best scientific and technological sources, it is important that the Contractor not subcontract technical or scientific work without the Contracting Officer's advance approval. (End of clause) [71 FR...

Development of Regional Excel-Based Stormwater/Nutrient BMP Optimization Tool (Opti-Tool)

EPA Science Inventory

During 2014, EPA Region 1 contracted with Tetra Tech, Inc. to work with a regional technical Advisory Committee to develop an Excel-based stormwater/nutrient BMP optimization tool (Opti-Tool) using regional precipitation data and regionally calibrated BMP performance data from UN...

20 CFR 632.78 - Training activities.

Code of Federal Regulations, 2010 CFR

2010-04-01

... determined by representatives of the Indian and Native American communities and groups served (sec. 401(a... the technical skills and information required to perform a specific job or group of jobs. It may be... world of work; (2) Counseling. This includes employment and training related counseling and testing; (3...

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico.

PubMed

Quintana, Sandra

2015-11-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance.

16 CFR § 1401.5 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Providing performance and technical data to...: REQUIREMENTS TO PROVIDE THE COMMISSION WITH PERFORMANCE AND TECHNICAL DATA; REQUIREMENTS TO NOTIFY CONSUMERS AT POINT OF PURCHASE OF PERFORMANCE AND TECHNICAL DATA § 1401.5 Providing performance and technical data to...

Technical Feasibility Aspects of the Geothermal Resource Reporting Methodology (GRRM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Badgett, Alex; Young, Katherine R; Dobson, Patrick F.

This paper reviews the technical assessment of the Geothermal Research Reporting Methodology (GRRM, http://en.openei.org/wiki/GRRM) being developed for reporting geothermal resources and project progress. The goal of the methodology is to provide the U.S. Department of Energy's Geothermal Technologies Office (GTO) with a consistent and comprehensible means of evaluating the impacts of its funding programs. The GRRM is designed to provide uniform assessment criteria for geothermal resource grades and developmental phases of geothermal resource exploration and development. This resource grade system provides information on twelve attributes of geothermal resource locations (e.g., temperature, permeability, land access) to indicate potential for geothermal development.more » The GTO plans to use these Protocols to help quantitatively identify the greatest barriers to geothermal development, develop measureable program goals that will have the greatest impact to geothermal deployment, objectively evaluate proposals based (in part) on a project's ability to contribute to program goals, monitor project progress, and report on GTO portfolio performance. The GRRM assesses three areas of geothermal potential: geological, socio-economic, and technical. Previous work and publications have discussed the work done on the geological aspects of this methodology (Young et al. 2015c); this paper details the development of the technical assessment of the GRRM. Technical development attributes considered include: reservoir management, drilling, logistics, and power conversion.« less

Involvement of Individuals in the Development of Technical Solutions and Rules of Management for Building Renovation Projects: A Case Study of Latvia

NASA Astrophysics Data System (ADS)

Pukite, I.; Grekis, A.; Geipele, I.; Zeltins, N.

2017-08-01

In March 2016, the Latvian government approved a new support program for increasing energy efficiency in residential apartment buildings. For the support of renovation of apartment buildings in the period from 2016 to 2023, 166 470 588 EUR will be available. Different persons, such as energy auditors, designers, architects, project managers and builders, will be involved in the process of planning, development and implementation of building renovation. At the development stage of the building renovation project, special attention should be devoted to the first stage - energy audit and technical project development. The problem arises due to the fact that each of these individuals, during the development of technical building documentation, does not work as a completely unified system. The implementation of construction project planning and organisational management system is one of the most important factors to guarantee that the quality of building renovation project is ensured in accordance with the laws and regulatory standards. The paper studies mutual cooperation, professionalism and the role of information feedback of personnel involved in the planning stage of building renovation, which is an essential prerequisite for the renovation process in order to achieve high quality of work and reduce the energy performance indicator. The present research includes the analysis of different technical solutions and their impact on energy efficiency. Mutual harmonisation of technical specifications is also investigated.

Invention and Writing in Technical Work: Representing the Object.

ERIC Educational Resources Information Center

Winsor, Dorothy A.

1994-01-01

Describes the way invention is relevant to the practice of technical writing. Studies three engineering students engaged in a real-world project. Shows how the students' technical work and invention for the final report were simultaneous activities. Claims that invention for and through writing overlaps with technical invention. (HB)

Comparative Performance in Single-Port Versus Multiport Minimally Invasive Surgery, and Small Versus Large Operative Working Spaces

PubMed Central

Marcus, Hani J.; Seneci, Carlo A.; Hughes-Hallett, Archie; Cundy, Thomas P.; Nandi, Dipankar; Yang, Guang-Zhong; Darzi, Ara

2015-01-01

Background. Surgical approaches such as transanal endoscopic microsurgery, which utilize small operative working spaces, and are necessarily single-port, are particularly demanding with standard instruments and have not been widely adopted. The aim of this study was to compare simultaneously surgical performance in single-port versus multiport approaches, and small versus large working spaces. Methods. Ten novice, 4 intermediate, and 1 expert surgeons were recruited from a university hospital. A preclinical randomized crossover study design was implemented, comparing performance under the following conditions: (1) multiport approach and large working space, (2) multiport approach and intermediate working space, (3) single-port approach and large working space, (4) single-port approach and intermediate working space, and (5) single-port approach and small working space. In each case, participants performed a peg transfer and pattern cutting tasks, and each task repetition was scored. Results. Intermediate and expert surgeons performed significantly better than novices in all conditions (P < .05). Performance in single-port surgery was significantly worse than multiport surgery (P < .01). In multiport surgery, there was a nonsignificant trend toward worsened performance in the intermediate versus large working space. In single-port surgery, there was a converse trend; performances in the intermediate and small working spaces were significantly better than in the large working space. Conclusions. Single-port approaches were significantly more technically challenging than multiport approaches, possibly reflecting loss of instrument triangulation. Surprisingly, in single-port approaches, in which triangulation was no longer a factor, performance in large working spaces was worse than in intermediate and small working spaces. PMID:26464468

Sociotechnical attributes of safe and unsafe work systems.

PubMed

Kleiner, Brian M; Hettinger, Lawrence J; DeJoy, David M; Huang, Yuang-Hsiang; Love, Peter E D

2015-01-01

Theoretical and practical approaches to safety based on sociotechnical systems principles place heavy emphasis on the intersections between social-organisational and technical-work process factors. Within this perspective, work system design emphasises factors such as the joint optimisation of social and technical processes, a focus on reliable human-system performance and safety metrics as design and analysis criteria, the maintenance of a realistic and consistent set of safety objectives and policies, and regular access to the expertise and input of workers. We discuss three current approaches to the analysis and design of complex sociotechnical systems: human-systems integration, macroergonomics and safety climate. Each approach emphasises key sociotechnical systems themes, and each prescribes a more holistic perspective on work systems than do traditional theories and methods. We contrast these perspectives with historical precedents such as system safety and traditional human factors and ergonomics, and describe potential future directions for their application in research and practice. The identification of factors that can reliably distinguish between safe and unsafe work systems is an important concern for ergonomists and other safety professionals. This paper presents a variety of sociotechnical systems perspectives on intersections between social--organisational and technology--work process factors as they impact work system analysis, design and operation.

A static organization in a dynamic context--A qualitative study of changes in working conditions for Swedish engine officers.

PubMed

Lundh, Monica; Rydstedt, Leif W

2016-07-01

During the last decades the shipping industry has undergone rapid technical developments and experienced hard economic conditions and increased striving for profitability. This has led to reduced staffing and changes in task performance, which has been reported to increase workload for the remaining seafarers. The working conditions on board have a number of distinct and in many ways unique characteristics, which makes the job demands and resources for seafarers unique in several ways. The purpose of this study was to assess how engine room staff perceives how these major technical and organizational changes in the shipping industry have affected job demands as well as resources. The study compiled individual interviews and focus groups interviews with engine crew members where they were asked to elaborate on the psychosocial work environment and the major changes in the working conditions on board. Engine crew describes a work situation where they feel a lack of resources. The content of the work has changed, staffing has been reduced, new tasks are being added but the organization of the crew and the design of the work place remains unaltered. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

GKTC ACTIVITIES TO PROVIDE NUCLEAR MATERIAL PHYSICAL PROTECTION, CONTROL AND ACCOUNTING TRAINING FOR 2011-2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Romanova, Olena; Gavrilyuk, Victor I.; Kirischuk, Volodymyr

2011-10-01

The GKTC was created at the Kyiv Institute of Nuclear Research as a result of collaborative efforts between the United States and Ukraine. The GKTC has been designated by the Ukrainian Government to provide the MPC&A training and methodological assistance to nuclear facilities and nuclear specialists. In 2010 the GKTC has conducted the planned assessment of training needs of Ukrainian MPC&A specialists. The objective of this work is to acquire the detailed information about the number of MPC&A specialists and guard personnel, who in the coming years should receive the further advanced training. As a result of the performed trainingmore » needs evaluation the GKTC has determined that in the coming years a number of new training courses need to be developed. Some training courses are already in the process of development. Also taking into account the specific of activity on the guarding of nuclear facilities, GKTC has begun to develop the specialized training courses for the guarding unit personnel. The evaluation of needs of training of Ukrainian specialists on the physical protection shows that without the technical base of learning is not possible to satisfy the needs of Ukrainian facilities, in particular, the need for further training of specialists who maintains physical protection technical means, provides vulnerability assessment and testing of technical means. To increase the training effectiveness and create the basis for specialized training courses holding the GKTC is now working on the construction of an Interior (non-classified) Physical Protection Training Site. The objective of this site is to simulate the actual conditions of the nuclear facility PP system including the complex of engineering and technical means that will help the GKTC training course participants to consolidate the knowledge and gain the practical skills in the work with PP system engineering and technical means for more effective performance of their official duties. This paper briefly describes the practical efforts applied to the provision of physical protection specialists advanced training in Ukraine and real results on the way to implement such efforts in 2011-2012.« less

1999 NASA High-Speed Research Program Aerodynamic Performance Workshop. Volume 2; High Lift

NASA Technical Reports Server (NTRS)

Hahne, David E. (Editor)

1999-01-01

The High-Speed Research Program sponsored the NASA High-Speed Research Program Aerodynamic Performance Review on February 8-12, 1999 in Anaheim, California. The review was designed to bring together NASA and industry High-Speed Civil Transport (HSCT) Aerodynamic Performance technology development participants in areas of: Configuration Aerodynamics (transonic and supersonic cruise drag prediction and minimization) and High-Lift. The review objectives were to: (1) report the progress and status of HSCT aerodynamic performance technology development; (2) disseminate this technology within the appropriate technical communities; and (3) promote synergy among the scientist and engineers working HSCT aerodynamics. The HSR AP Technical Review was held simultaneously with the annual review of the following airframe technology areas: Materials and Structures, Environmental Impact, Flight Deck, and Technology Integration Thus, a fourth objective of the Review was to promote synergy between the Aerodynamic Performance technology area and the other technology areas within the airframe element of the HSR Program. This Volume 2/Part 1 publication presents the High-Lift Configuration Development session.

Building, Maintaining, and Ending Relationships: An Urban School District and a Technical Assistance Team. Documentation and Technical Assistance in Urban Schools.

ERIC Educational Resources Information Center

Holmes, Manford L.

This paper describes the nature of the relationships developed between the technical assistance team of the Documentation and Technical Assistance (DTA) Project and members of a Chicago (Illinois) school district staff with whom the DTA worked. First, the methodology with which the technical assistance work was studied is described, as is the…

High Technology Engineering Services, Inc. fiscal year 1993 and 1994 research and development report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This document has been prepared by the Professional Staff of High Technology Engineering Services, Inc. (HTES) for fiscal year (FY) 1993. Work was performed for various aspects of mechanical design and analysis, materials development and properties quantification, nuclear environment performance, and engineering program prioritization. The tasks enumerated in the subcontract, attachment B are: 1. Assist in preparation of final R&D report for SDC detector development. 2. Subcontractor shall make contributions to the development of innovative processes for the manufacture of quasi- isotropic, enhanced thermal conductivity compression molded advanced composite materials. 3. Perform finite element analysis as it relates to themore » Superconducting Super Collider Silicon Tracking System, both mechanical and thermal, of very thin section advanced composite materials. 4. Subcontractor shall perform technical studies, reviews, and assessments of the current program for advanced composites materials processing and testing. 5. Subcontractor shall attend meetings and discussions as directed by MEE-12 technical representative. Unfortunately during the course of FY93, technical and financial challenges prevailed against the aggressive goals set for the program. In point of fact, less than 25% of the contract value was able to be expended due to technical delays and programmatic funding cuts. Also, contracting difficulties with the SSC Lab and financial burdens at Los Alamos totally stopped progress on the subject subcontract during the whole of FY94. This was a great blow to me and the HTES, Inc. technical staff. Despite the negative influences over the years, significant progress was made in materials properties quantification and development of essential research and development documentation. The following brief report and attendant appendices will address these achievements.« less

Technical knowledge and skills development in the informal sector in Kenya: The case of custom tailors

NASA Astrophysics Data System (ADS)

Apunda, Edwinah Amondi; de Klerk, Helena M.; Ogina, Teresa

2017-06-01

Custom tailors working in the informal sector in Nairobi, Kenya, mainly acquire technical skills through undertaking traditional apprenticeships (TAs). However, most of these tailors are semi-skilled, produce low-quality products and are often poorer than their formally trained counterparts. This qualitative case study explores the aspects of technical skills and knowledge which tailoring apprentices develop, and the factors which influence these outcomes. The findings show that apprentices do acquire basic technical skills for immediate application to ongoing tailoring activities (such as how to take body measurements, draft patterns, and cut, sew and finish constructed garments). However, apprentices do not acquire the technical knowledge that underpins the trade. Most master tailors who have completed TAs lack technical knowledge and have no access to technical skills upgrading. This perpetuates the cycle of basic and limited technical skills transfer to apprentices, poor performance and poverty among tailors. Both apprentices and master tailors expressed concern over knowledge limitations in TAs and a need to access further training to improve skills and acquire knowledge of the trade. The authors of this article argue that, technically and pedagogically, skilled master tailors are critical to improving training quality. Complementary training in theoretical knowledge is also important in improving apprentices' technical skills and understanding of the trade. Inclusion of TAs in government policy may help ensure sustainable improvement of skills.

Evaluation of Aeroservoelastic Effects on Flutter

NASA Technical Reports Server (NTRS)

Nagaraja, K. S.; Felt, Larry R.; Kraft, Raymond

1998-01-01

This report presents work performed by The Boeing Company to satisfy the deliverable "Evaluation of aeroservoelastic Effects on Symmetric Flutter" for Subtask 7 of Reference 1. The objective of this report is to incorporate the improved methods for studying the effects of a closed-loop control system on the aeroservoelastic behavior of the airplane planned under NASA HSR technical Integration Task 20 work. Also, a preliminary evaluation of the existing pitch control laws on symmetric flutter of the TCA configuration was addressed."The goal is to develop an improved modeling methodology and perform design studies that account for the aero-structures-systems interaction effects.

In-Drift Microbial Communities

DOE Office of Scientific and Technical Information (OSTI.GOV)

D. Jolley

2000-11-09

As directed by written work direction (CRWMS M and O 1999f), Performance Assessment (PA) developed a model for microbial communities in the engineered barrier system (EBS) as documented here. The purpose of this model is to assist Performance Assessment and its Engineered Barrier Performance Section in modeling the geochemical environment within a potential repository drift for TSPA-SR/LA, thus allowing PA to provide a more detailed and complete near-field geochemical model and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near Field Environment (NFE) Revision 2 (NRC 1999).more » This model and its predecessor (the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document, CRWMS M and O 1998a) was developed to respond to the applicable KTIs. Additionally, because of the previous development of the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a), the M and O was effectively able to resolve a previous KTI concern regarding the effects of microbial processes on seepage and flow (NRC 1998). This document supercedes the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a). This document provides the conceptual framework of the revised in-drift microbial communities model to be used in subsequent performance assessment (PA) analyses.« less

Common Ada Programming Support Environment (APSE) Interface Set (CAIS) Implementation Validation Capability (CIVC2)

DTIC Science & Technology

1992-06-01

Paper, Version 2.0, December 1989. [Woodcock90] Gary Woodcock , Automated Generation of Hypertext Documents, CIVC Technical Report (working paper...environment setup, performance testing, assessor testing, and analysis) of the ACEC. A captive scenario example could be developed that would guide the

Measurement for Work. Teaching Guide and Sample Learning Activities.

ERIC Educational Resources Information Center

Angel, Margo; Bolton, Chris

This document is intended to help Australian technical and further education instructors in New South Wales (TAFE NSW) identify teaching principles and learning activities that they can use to help adult learners master the mathematics processes, knowledge, and skills needed to perform basic measurement tasks in today's workplace. The materials…

Information Processing Techniques Program. Volume II. Communications- Adaptive Internetting

DTIC Science & Technology

1977-09-30

LABORATORY INFORMATION PROCESSING TECHNIQUES PROGRAM VOLUME II: COMMUNICATIONS-ADAPTIVE INTERNETTING I SEMIANNUAL TECHNICAL SUMMARY REPORT TO THE...MASSACHUSETTS ABSTRACT This repori describes work performed on the Communications-Adaptive Internetting program sponsored by the Information ... information processing techniques network speech terminal communicatlons-adaptive internetting 04 links digital voice communications time-varying

76 FR 33307 - Strengthen and Promote the Role of Local Health Departments in Retail Food Safety Regulation (U-50)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

..., scientifically-based guidance, training, program evaluation, and technical assistance. B. Research/Cooperative... officials. NACCHO values guide staff and leadership in work to achieve optimal health for all through an... annual appropriations and successful performance. III. Paper Application, Registration, and Submission...

NATIONAL LABORATORIES: Better Performance Reporting Could Aid Oversight of Laboratory-Directed R&D Program

DTIC Science & Technology

2001-09-01

Development ( LDRD ) program, which formalized a long-standing policy of allowing its multi-program national laboratories discretion to conduct self...initiated, independent research and development (R&D). DOE requires that LDRD work must focus on the advanced study of scientific or technical problems...

Speech Understanding Research. Annual Technical Report.

ERIC Educational Resources Information Center

Walker, Donald E.; And Others

This report is the third in a series of annual reports describing the research performed by Stanford Research Institute to provide the technology that will allow speech understanding systems to be designed and implemented for a variety of different task domains and environmental constraints. The current work is being carried out cooperatively with…

TALIS 2013 Technical Report: Teaching and Learning International Survey

ERIC Educational Resources Information Center

OECD Publishing, 2013

2013-01-01

Effective teaching and teachers are key to producing high-performing students worldwide. So how can countries prepare teachers to face the diverse challenges in today's schools? The Teaching and Learning International Survey (TALIS) helps answer this question. TALIS asks teachers and schools about their working conditions and the learning…

48 CFR 2452.237-73 - Conduct of Work and Technical Guidance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conditions of the contract. (c) The GTR will issue technical guidance in writing or, if issued orally, he/she... Technical Guidance. 2452.237-73 Section 2452.237-73 Federal Acquisition Regulations System DEPARTMENT OF... Provisions and Clauses 2452.237-73 Conduct of Work and Technical Guidance. As prescribed in 2437.110(d...

Camp Upshur, Marine Corps Base Quantico, VA Architectural Survey

DTIC Science & Technology

2009-08-01

MIPR) M9301509MPFE007, dated 21 November 2008. The MCB Quantico technical monitor was John Haynes, Archeologist. The work was performed by the...Manager was Adam Smith. Dr. Christopher White is Chief, CN-C, and Dr. John Bandy is Chief, CN. The Deputy Director of CERL is Dr. Kirankumar V...Previous work reported in “Historical Resource Survey and Evaluation, Marine Corps Base Quantico, Virginia” John Milner Associates, 2008 and on

Technical Stability and Biological Variability in MicroRNAs from Dried Blood Spots: A Lung Cancer Therapy-Monitoring Showcase.

PubMed

Kahraman, Mustafa; Laufer, Thomas; Backes, Christina; Schrörs, Hannah; Fehlmann, Tobias; Ludwig, Nicole; Kohlhaas, Jochen; Meese, Eckart; Wehler, Thomas; Bals, Robert; Keller, Andreas

2017-09-01

Different work flows have been proposed to use miRNAs as blood-borne biomarkers. In particular, the method used for collecting blood from patients can considerably influence the diagnostic results. We explored whether dried blood spots (DBSs) facilitate stable miRNA measurements and compared its technical stability with biological variability. First, we tested the stability of DBS samples by generating from 1 person 18 whole-genome-wide miRNA profiles of DBS samples that were exposed to different temperature and humidity conditions. Second, we investigated technical reproducibility by performing 7 replicates of DBS again from 1 person. Third, we investigated DBS samples from 53 patients with lung cancer undergoing different therapies. Across these 3 stages, 108 genome-wide miRNA profiles from DBS were generated and evaluated biostatistically. In the stability analysis, we observed that temperature and humidity had an overall limited influence on the miRNomes (average correlation between the different conditions of 0.993). Usage of a silica gel slightly diminished DBS' technical reproducibility. The 7 technical replicates had an average correlation of 0.996. The correlation with whole-blood PAXGene miRNomes of the same individual was remarkable (correlation of 0.88). Finally, evaluation of the samples from the 53 patients with lung cancer exposed to different therapies showed that the biological variations exceeded the technical variability significantly ( P < 0.0001), yielding 51 dysregulated miRNAs. We present a stable work flow for profiling of whole miRNomes on the basis of samples collected from DBS. Biological variations exceeded technical variations significantly. DBS-based miRNA profiles will potentially further the translational character of miRNA biomarker studies. © 2017 American Association for Clinical Chemistry.

Active learning in the space engineering education at Technical University of Madrid

NASA Astrophysics Data System (ADS)

Rodríguez, Jacobo; Laverón-Simavilla, Ana; Lapuerta, Victoria; Ezquerro Navarro, Jose Miguel; Cordero-Gracia, Marta

This work describes the innovative activities performed in the field of space education at the Technical University of Madrid (UPM), in collaboration with the center engaged by the European Space Agency (ESA) in Spain to support the operations for scientific experiments on board the International Space Station (E-USOC). These activities have been integrated along the last academic year of the Aerospatiale Engineering degree. A laboratory has been created, where the students have to validate and integrate the subsystems of a microsatellite by using demonstrator satellites. With the acquired skills, the students participate in a training process centered on Project Based Learning, where the students work in groups to perform the conceptual design of a space mission, being each student responsible for the design of a subsystem of the satellite and another one responsible of the mission design. In parallel, the students perform a training using a ground station, installed at the E-USOC building, which allow them to learn how to communicate with satellites, how to download telemetry and how to process the data. This also allows students to learn how the E-USOC works. Two surveys have been conducted to evaluate the impact of these techniques in the student engineering skills and to know the degree of satisfaction of students with respect to the use of these learning methodologies.

16 CFR § 1407.3 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Providing performance and technical data to... TECHNICAL DATA BY LABELING § 1407.3 Providing performance and technical data to purchasers by labeling. (a... technical data related to performance and safety to prospective purchasers of such products at the time of...

16 CFR 1407.3 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Providing performance and technical data to... TECHNICAL DATA BY LABELING § 1407.3 Providing performance and technical data to purchasers by labeling. (a... technical data related to performance and safety to prospective purchasers of such products at the time of...

16 CFR 1407.3 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Providing performance and technical data to... TECHNICAL DATA BY LABELING § 1407.3 Providing performance and technical data to purchasers by labeling. (a... technical data related to performance and safety to prospective purchasers of such products at the time of...

16 CFR 1407.3 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Providing performance and technical data to... TECHNICAL DATA BY LABELING § 1407.3 Providing performance and technical data to purchasers by labeling. (a... technical data related to performance and safety to prospective purchasers of such products at the time of...

16 CFR 1407.3 - Providing performance and technical data to purchasers by labeling.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 2 2011-01-01 2011-01-01 false Providing performance and technical data to... TECHNICAL DATA BY LABELING § 1407.3 Providing performance and technical data to purchasers by labeling. (a... technical data related to performance and safety to prospective purchasers of such products at the time of...

[Raman spectroscopy applied to analytical quality control of injectable drugs: analytical evaluation and comparative economic versus HPLC and UV / visible-FTIR].

PubMed

Bourget, P; Amin, A; Vidal, F; Merlette, C; Troude, P; Corriol, O

2013-09-01

In France, central IV admixture of chemotherapy (CT) treatments at the hospital is now required by law. We have previously shown that the shaping of Therapeutic Objects (TOs) could profit from an Analytical Quality Assurance (AQA), closely linked to the batch release, for the three key parameters: identity, purity, and initial concentration of the compound of interest. In the course of recent and diversified works, we showed the technical superiority of non-intrusive Raman Spectroscopy (RS) vs. any other analytical option and, especially for both HPLC and vibrational method using a UV/visible-FTIR coupling. An interconnected qualitative and economic assessment strongly helps to enrich these relevant works. The study compares in operational situation, the performance of three analytical methods used for the AQC of TOs. We used: a) a set of evaluation criteria, b) the depreciation tables of the machinery, c) the cost of disposables, d) the weight of equipment and technical installations, e) the basic accounting unit (unit of work) and its composite costs (Euros), which vary according to the technical options, the weight of both human resources and disposables; finally, different combinations are described. So, the unit of work can take 12 different values between 1 and 5.5 Euros, and we provide various recommendations. A qualitative evaluation grid constantly places the SR technology as superior or equal to the 2 other techniques currently available. Our results demonstrated: a) the major interest of the non-intrusive AQC performed by RS, especially when it is not possible to analyze a TO with existing methods e.g. elastomeric portable pumps, and b) the high potential for this technique to be a strong contributor to the security of the medication circuit, and to fight the iatrogenic effects of drugs especially in the hospital. It also contributes to the protection of all actors in healthcare and of their working environment.

Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pratt, Joesph W.; Klebanoff, Leonard E.; Munoz-Ramos, Karina

2011-05-01

Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today’s technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-didmore » the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.« less

Proton exchange membrane fuel cells for electrical power generation on-board commercial airplanes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curgus, Dita Brigitte; Munoz-Ramos, Karina; Pratt, Joseph William

2011-05-01

Deployed on a commercial airplane, proton exchange membrane fuel cells may offer emissions reductions, thermal efficiency gains, and enable locating the power near the point of use. This work seeks to understand whether on-board fuel cell systems are technically feasible, and, if so, if they offer a performance advantage for the airplane as a whole. Through hardware analysis and thermodynamic and electrical simulation, we found that while adding a fuel cell system using today's technology for the PEM fuel cell and hydrogen storage is technically feasible, it will not likely give the airplane a performance benefit. However, when we re-didmore » the analysis using DOE-target technology for the PEM fuel cell and hydrogen storage, we found that the fuel cell system would provide a performance benefit to the airplane (i.e., it can save the airplane some fuel), depending on the way it is configured.« less

Quarterly Performance/Technical Report of the National Marrow Donor Program

DTIC Science & Technology

2009-02-10

and epitope level matching for HLA-DPB1. Submitted. o Z Shamim , L Ryder, M Haagenson , S Spellman, T Wang, S Lee, K Müller. Polymorphism in the...3, 4 6. AUTHOR( S ) Setterholm, Michelle 5f. WORK UNIT NUMBER N/A 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) National Marrow Donor...Program 3001 Broadway St., N.E., Ste. 500 Minneapolis, MN 55413 8. PERFORMING ORGANIZATION REPORT NUMBER N/A 10. SPONSOR/MONITOR’S ACRONYM( S ) ONR 9

Site Guidelines for a "Making Middle Grades Work" Technical Review Visit

ERIC Educational Resources Information Center

Southern Regional Education Board, 2004

2004-01-01

The purpose of the Technical Review Visit (TRV) is to follow up on the actions taken to implement the recommendations indicated for each challenge in the most recent Technical Assistance Visit (TAV) report. This document provides the following: (1) Site Guidelines for the Making Middle Grades Work (MMGW) Technical Review Visit; (2) Site Checklist;…

Work Values and Job Satisfaction of Arkansas Business Educators in Secondary Systems and Community/Technical Colleges.

ERIC Educational Resources Information Center

Funderburg, Dinnah L.; Kapes, Jerome T.

The work values and job satisfaction of Arkansas business educators in secondary school systems and community/technical colleges were examined through a survey of a random sample of 129 of Arkansas' 926 secondary and community/technical college business educators. Of those teachers sent surveys (67 secondary and 62 community/technical college…

75 FR 68606 - Chetco River Gravel Mining Executive and Technical Teams; Notification of Availability of Documents.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-08

... Executive and Technical Teams; Notification of Availability of Documents. AGENCY: U.S. Army Corps of... public all work products of the Chetco River Gravel Mining Executive and Technical Teams. These work... INFORMATION: The Executive and Technical Teams were established in 2007 as part of an initiative to evaluate...

Method for Household Refrigerators Efficiency Increasing

NASA Astrophysics Data System (ADS)

Lebedev, V. V.; Sumzina, L. V.; Maksimov, A. V.

2017-11-01

The relevance of working processes parameters optimization in air conditioning systems is proved in the work. The research is performed with the use of the simulation modeling method. The parameters optimization criteria are considered, the analysis of target functions is given while the key factors of technical and economic optimization are considered in the article. The search for the optimal solution at multi-purpose optimization of the system is made by finding out the minimum of the dual-target vector created by the Pareto method of linear and weight compromises from target functions of the total capital costs and total operating costs. The tasks are solved in the MathCAD environment. The research results show that the values of technical and economic parameters of air conditioning systems in the areas relating to the optimum solutions’ areas manifest considerable deviations from the minimum values. At the same time, the tendencies for significant growth in deviations take place at removal of technical parameters from the optimal values of both the capital investments and operating costs. The production and operation of conditioners with the parameters which are considerably deviating from the optimal values will lead to the increase of material and power costs. The research allows one to establish the borders of the area of the optimal values for technical and economic parameters at air conditioning systems’ design.

The Accreditation Experience of Clinical Laboratories and Blood Banks in Mexico

PubMed Central

2015-01-01

The accreditation of clinical laboratories and blood banks based on ISO 15189 is now being consolidated in Mexico, and is coordinated by the Mexican accreditation entity innovative strategies, A.C. (ema) and supported by the activities of the committee of clinical laboratories and blood banks. The active participation in working groups formed by the technical committee of clinical laboratories and blood banks in specific areas, has contributed to the formulation of technical documents and criteria of evaluation that strengthen the current accreditation scheme. The national registry of evaluation (PNE) consists of technical experts and evaluators from different disciplines of clinical laboratory; the evaluators actively participate in accreditation assessment, with an ultimate goal to receive training and feedback for continuous improvement of its own performance. PMID:27683498

Fusion Safety Program annual report, fiscal year 1994

NASA Astrophysics Data System (ADS)

Longhurst, Glen R.; Cadwallader, Lee C.; Dolan, Thomas J.; Herring, J. Stephen; McCarthy, Kathryn A.; Merrill, Brad J.; Motloch, Chester C.; Petti, David A.

1995-03-01

This report summarizes the major activities of the Fusion Safety Program in fiscal year 1994. The Idaho National Engineering Laboratory (INEL) is the designated lead laboratory and Lockheed Idaho Technologies Company is the prime contractor for this program. The Fusion Safety Program was initiated in 1979. Activities are conducted at the INEL, at other DOE laboratories, and at other institutions, including the University of Wisconsin. The technical areas covered in this report include tritium safety, beryllium safety, chemical reactions and activation product release, safety aspects of fusion magnet systems, plasma disruptions, risk assessment failure rate data base development, and thermalhydraulics code development and their application to fusion safety issues. Much of this work has been done in support of the International Thermonuclear Experimental Reactor (ITER). Also included in the report are summaries of the safety and environmental studies performed by the Fusion Safety Program for the Tokamak Physics Experiment and the Tokamak Fusion Test Reactor and of the technical support for commercial fusion facility conceptual design studies. A major activity this year has been work to develop a DOE Technical Standard for the safety of fusion test facilities.

Systems approach used in the Gas Centrifuge Enrichment Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rooks, W.A. Jr.

A requirement exists for effective and efficient transfer of technical knowledge from the design engineering team to the production work force. Performance-Based Training (PBT) is a systematic approach to the design, development, and implementation of technical training. This approach has been successfully used by the US Armed Forces, industry, and other organizations. The advantages of the PBT approach are: cost-effectiveness (lowest life-cycle training cost), learning effectiveness, reduced implementation time, and ease of administration. The PBT process comprises five distinctive and rigorous phases: Analysis of Job Performance, Design of Instructional Strategy, Development of Training Materials and Instructional Media, Validation of Materialsmore » and Media, and Implementation of the Instructional Program. Examples from the Gas Centrifuge Enrichment Plant (GCEP) are used to illustrate the application of PBT.« less

Nailfold capillaroscopy microscopy - an interdisciplinary appraisal.

PubMed

Klein-Weigel, Peter Franz; Sunderkötter, Cord; Sander, Oliver

2016-09-01

Nailfold capillaroscopy is a method of great diagnostic value in the differential diagnosis of primary versus secondary Raynaud´s phenomenon, of systemic sclerosis versus other so called connective tissue diseases and of additional diagnostic value in other entities. Rheumatologists, dermatologists, and angiologists in Germany have convened in an interdisciplinary working group in which they synergistically combined their expertise to develop a common nomenclature and standards for the technical performance of nailfold capillary microscopy. The article gives an overview of historical and technical aspects of capillaroscopy, morphologic findings, and disease-specific patterns. It also provides a critical appraisal of its significance in the diagnosis and sequelae of these interdisciplinarily-managed diseases including its performance in children and gives an excursion in the potential perspectives of capillaroscopy in less common indications.

Comparative Performance in Single-Port Versus Multiport Minimally Invasive Surgery, and Small Versus Large Operative Working Spaces: A Preclinical Randomized Crossover Trial.

PubMed

Marcus, Hani J; Seneci, Carlo A; Hughes-Hallett, Archie; Cundy, Thomas P; Nandi, Dipankar; Yang, Guang-Zhong; Darzi, Ara

2016-04-01

Surgical approaches such as transanal endoscopic microsurgery, which utilize small operative working spaces, and are necessarily single-port, are particularly demanding with standard instruments and have not been widely adopted. The aim of this study was to compare simultaneously surgical performance in single-port versus multiport approaches, and small versus large working spaces. Ten novice, 4 intermediate, and 1 expert surgeons were recruited from a university hospital. A preclinical randomized crossover study design was implemented, comparing performance under the following conditions: (1) multiport approach and large working space, (2) multiport approach and intermediate working space, (3) single-port approach and large working space, (4) single-port approach and intermediate working space, and (5) single-port approach and small working space. In each case, participants performed a peg transfer and pattern cutting tasks, and each task repetition was scored. Intermediate and expert surgeons performed significantly better than novices in all conditions (P < .05). Performance in single-port surgery was significantly worse than multiport surgery (P < .01). In multiport surgery, there was a nonsignificant trend toward worsened performance in the intermediate versus large working space. In single-port surgery, there was a converse trend; performances in the intermediate and small working spaces were significantly better than in the large working space. Single-port approaches were significantly more technically challenging than multiport approaches, possibly reflecting loss of instrument triangulation. Surprisingly, in single-port approaches, in which triangulation was no longer a factor, performance in large working spaces was worse than in intermediate and small working spaces. © The Author(s) 2015.

[The hygienic assessment of the organization of the vocational study practice of students training for the job of power-generating unit operator].

PubMed

Shpangenberg, S

1992-01-01

The study is carried out with schoolchildren from the educative and industrial complex of energetics (two classes with total 60 students) at the age of 17-18, from the Technical College of Energetics "V. Pick"--Sofia. They are trained for the profession "operator on power aggregates". The investigation is performed during the educative and industrial practice of the students in the Heat Power Station "Tr. Kostov" and the Heat Power Station "Sofia", as well as in the training shop of the technical college. Studies are made on: the functional adaptation of the organism through the reactivity of the CNS, some analysers, the cardiovascular system and the sympathetic-adrenal system, haemopoiesis; the factors of the educative and industrial environment; working/professional maturity of the students; health status of the adolescents. The results of the examination show low effectiveness of the education and industrial training in the Heat power station or low daily and annual exposure, leading to monotony, hypodynamia especially when working in second shift. It is recommended the education and industrial practice in the secondary special schools and technical colleges to be carried out in training shops, educative and industrial workshops and at standardization of the environmental factors and organization of rational regime of work and rest.

Cell-NPE (Numerical Performance Evaluation): Programming the IBM Cell Broadband Engine -- A General Parallelization Strategy

DTIC Science & Technology

2008-04-01

Space GmbH as follows: B. TECHNICAL PRPOPOSA/DESCRIPTION OF WORK Cell: A Revolutionary High Performance Computing Platform On 29 June 2005 [1...IBM has announced that is has partnered with Mercury Computer Systems, a maker of specialized computers . The Cell chip provides massive floating-point...the computing industry away from the traditional processor technology dominated by Intel. While in the past, the development of computing power has

Grounded Theory as a Methodology to Design Teaching Strategies for Historically Informed Musical Performance

ERIC Educational Resources Information Center

Mateos-Moreno, Daniel; Alcaraz-Iborra, Mario

2013-01-01

Our work highlights the necessity of revising the materials employed in instrumental education, which are systematically based on a progressive development of technical abilities and, though only transversely, without a structured sequence of contents, on issues referring to the interpretation of different periods and styles. In order to elaborate…

Publications of the Jet Propulsion Laboratory, 1981

NASA Technical Reports Server (NTRS)

1982-01-01

Over 500 externally distributed technical reports released during 1981 that resulted from scientific and engineering work performed, or managed by Jet Propulsion Laboratory are listed by primary author. Of the total number of entries, 311 are from the bimonthly Deep Space Network Progress Report, and its successor, the Telecommunications and Data Acquisition Progress Report.

Learning Soft Skills at Work: An Interview with Annalee Luhman

ERIC Educational Resources Information Center

Davis, Barbara D.; Muir, Clive

2004-01-01

Soft skills are attitudes and behaviors displayed in interactions among individuals that affect the outcomes of such encounters. These differ from hard skills, which are the technical knowledge and abilities required to perform specific job-related tasks more formally stated in job descriptions. In the past, it was felt that managers and employees…

Technical Report: Guide Details Best Practices in Photovoltaic System

Science.gov Websites

Operations and Maintenance | Solar Research | NREL Guide Details Best Practices in Photovoltaic A best-practices report on photovoltaic (PV) operations and maintenance (O&M) released by NREL and the PV O&M Working Group provides valuable insights on improving the performance of PV systems

Inputs to Vocational-Technical Education from Occupational Research.

ERIC Educational Resources Information Center

Christal, Raymond E.

The Air Force has developed a data bank which classifies job descriptions into occupational clusters. A retrieval system, also recently developed computes and publishes a consolidated description of the work being performed by any group which can be defined in terms of the background information. Other retrieval programs are available which enable…

Historical review of C-5A lift distribution control systems

NASA Technical Reports Server (NTRS)

Disney, T. E.; Eckholdt, D. C.

1976-01-01

Analytical and experimental development work on various load alleviation systems for the C-5A is reviewed to trace the development of the technical and hardware concepts to the present time. Variations in system objectives, means of implementation and effects on loads and airplane performance, stability and control are discussed.

Geotechnical Study and Foundation Structural Design, Next Generation Ionosonde (NEXION) Installation, Thule Air Base, Greenland

DTIC Science & Technology

2015-10-01

Richard Biagioni , Program Manager Space and Missile Systems Center (SMC) Remote Sensing Space Environmental Branch (RSSE) 1050 E. Stewart Ave...Environmental Branch (SMC/RSSE) under MIPR# F3LGWD5009G003. The technical monitor was Richard Biagioni , SMC/RSSE. The work was performed by Kevin Bjella

Toyota/Skyline Technical Education Network. Cooperative Demonstration Program. Final Performance Report.

ERIC Educational Resources Information Center

Skyline Coll., San Bruno, CA.

A joint project was conducted between Toyota Motor Sales and Skyline College (in the San Francisco, California, area) to create an automotive technician training program that would serve the needs of working adults. During the project, a model high technology curriculum suitable for adults was developed, the quality of instruction available for…

A Curriculum Guide for Achieving Equity in Education and the Workplace.

ERIC Educational Resources Information Center

Vocational Curriculum Resource Center of Maine, Fairfield.

This curriculum guide provides instructional materials that offer suggestions and strategies to change mindsets and remove barriers in order to pave the way for a gender-equitable, technically trained work force. A DACUM (Developing a Curriculum) chart forms the basis for the task performance guides provided for five audiences: students,…

Cloudbursting - Solving the 3-body problem

NASA Astrophysics Data System (ADS)

Chang, G.; Heistand, S.; Vakhnin, A.; Huang, T.; Zimdars, P.; Hua, H.; Hood, R.; Koenig, J.; Mehrotra, P.; Little, M. M.; Law, E.

2014-12-01

Many science projects in the future will be accomplished through collaboration among 2 or more NASA centers along with, potentially, external scientists. Science teams will be composed of more geographically dispersed individuals and groups. However, the current computing environment does not make this easy and seamless. By being able to share computing resources among members of a multi-center team working on a science/ engineering project, limited pre-competition funds could be more efficiently applied and technical work could be conducted more effectively with less time spent moving data or waiting for computing resources to free up. Based on the work from an NASA CIO IT Labs task, this presentation will highlight our prototype work in identifying the feasibility and identify the obstacles, both technical and management, to perform "Cloudbursting" among private clouds located at three different centers. We will demonstrate the use of private cloud computing infrastructure at the Jet Propulsion Laboratory, Langley Research Center, and Ames Research Center to provide elastic computation to each other to perform parallel Earth Science data imaging. We leverage elastic load balancing and auto-scaling features at each data center so that each location can independently define how many resources to allocate to a particular job that was "bursted" from another data center and demonstrate that compute capacity scales up and down with the job. We will also discuss future work in the area, which could include the use of cloud infrastructure from different cloud framework providers as well as other cloud service providers.

Association between depression and work stress in nursing professionals with technical education level 1

PubMed Central

Gherardi-Donato, Edilaine Cristina da Silva; Cardoso, Lucilene; Teixeira, Carla Araújo Bastos; Pereira, Sandra de Souza; Reisdorfer, Emilene

2015-01-01

Abstract Objective: to analize the relationship between depression and work stress in nursing professionals with technical education level of a teaching hospital in a city of the state of São Paulo. Methods: a cross-sectional study was carried out with 310 nursing technicians and nursing assistants, randomly selected. The outcome analyzed was the report of depression and its relationship with high levels of work stress, measured using the Job Stress Scale. Descriptive statistics and logistic regression were performed. Results: the prevalence of depression in this study was 20%, and it was more expressive in females, aged over 40 years, living without a partner and in smokers. The chance of depression was twice as high among professionals showing high levels of work stress, even after multiple regression adjusting. Conclusion: depressive symptoms were strongly associated with high stress levels among nursing assistants and nursing technicians, evidencing a problem to be considered along with the planning of specific intervention programs for this population, as well as the need for better cases management by the supervisors. PMID:26444177

Can We Predict Technical Aptitude?: A Systematic Review.

PubMed

Louridas, Marisa; Szasz, Peter; de Montbrun, Sandra; Harris, Kenneth A; Grantcharov, Teodor P

2016-04-01

To identify background characteristics and cognitive tests that may predict surgical trainees' future technical performance, and therefore be used to supplement existing surgical residency selection criteria. Assessment of technical skills is not commonly incorporated as part of the selection process for surgical trainees in North America. Emerging evidence, however, suggests that not all trainees are capable of reaching technical competence. Therefore, incorporating technical aptitude into selection processes may prove useful. A systematic search was carried out of the MEDLINE, PsycINFO, and Embase online databases to identify all studies that assessed associations between surrogate markers of innate technical abilities in surgical trainees, and whether these abilities correlate with technical performance. The quality of each study was evaluated using the Grading of Recommendations, Assessment, Development, and Evaluation system. A total of 8035 records were identified. After screening by title, abstract, and full text, 52 studies were included. Very few surrogate markers were found to predict technical performance. Significant associations with technical performance were seen for 1 of 23 participant-reported surrogate markers, 2 of 25 visual spatial tests, and 2 of 19 dexterity tests. The assessment of trainee Basic Performance Resources predicted technical performance in 62% and 75% of participants. To date, no single test has been shown to reliably predict the technical performance of surgical trainees. Strategies that rely on assessing multiple innate abilities, their interaction, and their relationship with technical skill may ultimately be more likely to serve as reliable predictors of future surgical performance.

Observation of behavioural markers of non-technical skills in the operating room and their relationship to intra-operative incidents.

PubMed

Siu, Joey; Maran, Nikki; Paterson-Brown, Simon

2016-06-01

The importance of non-technical skills in improving surgical safety and performance is now well recognised. Better understanding is needed of the impact that non-technical skills of the multi-disciplinary theatre team have on intra-operative incidents in the operating room (OR) using structured theatre-based assessment. The interaction of non-technical skills that influence surgical safety of the OR team will be explored and made more transparent. Between May-August 2013, a range of procedures in general and vascular surgery in the Royal Infirmary of Edinburgh were performed. Non-technical skills behavioural markers and associated intra-operative incidents were recorded using established behavioural marking systems (NOTSS, ANTS and SPLINTS). Adherence to the surgical safety checklist was also observed. A total of 51 procedures were observed, with 90 recorded incidents - 57 of which were considered avoidable. Poor situational awareness was a common area for surgeons and anaesthetists leading to most intra-operative incidents. Poor communication and teamwork across the whole OR team had a generally large impact on intra-operative incidents. Leadership was shown to be an essential set of skills for the surgeons as demonstrated by the high correlation of poor leadership with intra-operative incidents. Team-working and management skills appeared to be especially important for anaesthetists in the recovery from an intra-operative incident. A significant number of avoidable incidents occur during operative procedures. These can all be linked to failures in non-technical skills. Better training of both individual and team in non-technical skills is needed in order to improve patient safety in the operating room. Copyright © 2014 Royal College of Surgeons of Edinburgh (Scottish charity number SC005317) and Royal College of Surgeons in Ireland. Published by Elsevier Ltd. All rights reserved.

Social Consequences of Nomadic Working: A Case Study in an Organization

NASA Astrophysics Data System (ADS)

Singh, Ramanjit; Wood-Harper, Trevor

This research study identified social challenges that knowledge workers in the Swedish organization TeliaSonera (Telia) face when utilizing wireless technologies to conduct work on the move. Upon collecting the relevant research data, five problem areas were identified: work and life balance, addiction, organizational involvement, nomadic work and control, and individual productivity. Each problem area was examined with the philosophical underpinning of socio-technical design principles. The results confirm that better role boundary management, self-discipline, work negotiation, and e-mail communication skills may be required for the knowledge workers to manage the demands of nomadic working. Similarly, rewarding nomadic work performance, building employee supervisor trust relations, and designing jobs that enhance work and life balance can be imperative.

[Activities of System Studies and Simulation, Inc.

NASA Technical Reports Server (NTRS)

2004-01-01

Contents include the following: 1. Launch Vehicle Interface Work Performed: a. S3 provided to KSC the new launch inclination targets needed for the April '04 launch date. 2. Prelaunch operations work performed: a. S3 updated the staffing plan for MSFC on-console personnel\\during the Final Countdown prior to launch. 3. Software Assessment Work Performed: a. S3 evaluated and recommended approval for Program Control Board (PCB) proposed change 649 for ground software changes, as well as change 650 and 650A for Stored Program Commands. 4. Education and Public Outreach Work Performed: a. S3 continues to coordinate the effort for the design and fabrication of scale models of the GP-3 for use at the launch site, education forums, and management/technical briefings. S3 also prepared a Change Request for additional funds needed for fabrication of additional scale models. S3 drafted the planned uses of these models, including the possibility of participation in the Boston, MA showings of the traveling Einstein Exhibit. 5. Program Management Support Work Performed: a. S3 prepared the input for and closed three MSFC Centerwide Action Item Tracking Systems (CAITS) actions during this period.

Gender, Technology, and the History of Technical Communication.

ERIC Educational Resources Information Center

Durack, Katherine T.

1997-01-01

Considers why women have been absent from the history of technical communication. Discusses research from the history of technology suggesting that notions of "technology,""work," and "workplace" may be gendered terms. Concludes with several suggestions for defining technical communication so that significant works of…

Technical skills requirement of Indonesian construction labors to work in Malaysia

NASA Astrophysics Data System (ADS)

Adi, Henny Pratiwi

2017-03-01

Labors skills is an important part of construction projects implementation. Suitability between the skills possessed by labors with the skills needed by user is required to increase employment opportunities. Malaysia is a country that using construction labors from Indonesia. This study aims to get the kind of technical skills required by users of Indonesian constructian labors in Malaysia and also the importance level of technical skills. Data collecting in this research was conducted through interviews and questionnaires on contractors in Malaysia. The next stage was determine the importance level of technical skills in work field of carpenter, bricklayer, plumber and painters. The importance level of technical skills analyzed using the Relative Importance Index (RII). The results showed that mastering the operation of both instruments either manually or electrically is the most importance in the technical skills. Therefore, an understanding of the types of equipment for work field and the manner of operation is need to had by Indonesian construction labors who will work in Malaysia.

Solid State Energy Conversion Alliance Delphi SOFC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Larry Chick

2003-05-20

The objective of Phase I under this project is to develop a 5 kW SOFC power system for a range of fuels and applications. During Phase I, the following will be accomplished: 1. Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A). 2. Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate catalytic partial oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustion engine. Thismore » topical report covers work performed by Delphi Automotive Systems from January through June 2002 under DOE Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: 1. System Design and Integration 2. SOFC Stack Development 3. Reformer Development The next anticipated Technical Progress Report will be submitted January 30, 2003 and will include tasks contained within the cooperative agreement including development work on the Demonstration System A, if available.« less

Relationship between intraoperative non-technical performance and technical events in bariatric surgery.

PubMed

Fecso, A B; Kuzulugil, S S; Babaoglu, C; Bener, A B; Grantcharov, T P

2018-03-30

The operating theatre is a unique environment with complex team interactions, where technical and non-technical performance affect patient outcomes. The correlation between technical and non-technical performance, however, remains underinvestigated. The purpose of this study was to explore these interactions in the operating theatre. A prospective single-centre observational study was conducted at a tertiary academic medical centre. One surgeon and three fellows participated as main operators. All patients who underwent a laparoscopic Roux-en-Y gastric bypass and had the procedures captured using the Operating Room Black Box ® platform were included. Technical assessment was performed using the Objective Structured Assessment of Technical Skills and Generic Error Rating Tool instruments. For non-technical assessment, the Non-Technical Skills for Surgeons (NOTSS) and Scrub Practitioners' List of Intraoperative Non-Technical Skills (SPLINTS) tools were used. Spearman rank-order correlation and N-gram statistics were conducted. Fifty-six patients were included in the study and 90 procedural steps (gastrojejunostomy and jejunojejunostomy) were analysed. There was a moderate to strong correlation between technical adverse events (r s  = 0·417-0·687), rectifications (r s  = 0·380-0·768) and non-technical performance of the surgical and nursing teams (NOTSS and SPLINTS). N-gram statistics showed that after technical errors, events and prior rectifications, the staff surgeon and the scrub nurse exhibited the most positive non-technical behaviours, irrespective of operator (staff surgeon or fellow). This study demonstrated that technical and non-technical performances are related, on both an individual and a team level. Valuable data can be obtained around intraoperative errors, events and rectifications. © 2018 BJS Society Ltd Published by John Wiley & Sons Ltd.

RL-34 ring laser gyro laboratory evaluation for the Deep Space Network antenna application

NASA Technical Reports Server (NTRS)

1991-01-01

The overall results of this laboratory evaluation are quite encouraging. The gyro data is in good agreement with the system's overall pointing performance, which is quite close to the technical objectives for the Deep Space Network (DSN) application. The system can be calibrated to the levels required for millidegree levels of pointing performance, and initialization performance is within the required 0.001 degree objective. The blind target acquisition performance is within a factor of two of the 0.0001 degree objective, limited only by a combination of the slow rate (0.5 deg/sec) and the existing production quantization logic (0.38 arc-sec/pulse). Logic circuitry exists to better this performance such that it will better the objective by 50 percent. Representative data with this circuitry has been provided for illustration. Target tracking performance is about twice the one millidegree objective, with several factors contributing. The first factor is the bias stability of the gyros, which is exceptional, but will limit performance to the 0.001 and 0.002 degree range for long tracking periods. The second contributing factor is the accelerometer contributions when the system is elevated. These degrade performance into the 0.003 to 0.004 degree range, which could be improved upon with some additional changes. Finally, we have provided a set of recommendations to improve performance closer to the technical objectives. These recommendations include gyro, electronics, and system configurational changes that form the basis for additional work to achieve the desired performance. In conclusion, we believe that the RL-34 ring laser gyro-based advanced navigation system demonstrated performance consistent with expectations and technical objectives, and it has the potential for even further enhancement for the DSN application.

Configuration Management Plan for the Tank Farm Contractor

DOE Office of Scientific and Technical Information (OSTI.GOV)

WEIR, W.R.

The Configuration Management Plan for the Tank Farm Contractor describes configuration management the contractor uses to manage and integrate its technical baseline with the programmatic and functional operations to perform work. The Configuration Management Plan for the Tank Farm Contractor supports the management of the project baseline by providing the mechanisms to identify, document, and control the technical characteristics of the products, processes, and structures, systems, and components (SSC). This plan is one of the tools used to identify and provide controls for the technical baseline of the Tank Farm Contractor (TFC). The configuration management plan is listed in themore » management process documents for TFC as depicted in Attachment 1, TFC Document Structure. The configuration management plan is an integrated approach for control of technical, schedule, cost, and administrative processes necessary to manage the mission of the TFC. Configuration management encompasses the five functional elements of: (1) configuration management administration, (2) configuration identification, (3) configuration status accounting, (4) change control, and (5 ) configuration management assessments.« less

University Research Program in Robotics - "Technologies for Micro-Electrical-Mechanical Systems in directed Stockpile Work (DSW) Radiation and Campaigns", Final Technical Annual Report, Project Period 9/1/06 - 8/31/07

DOE Office of Scientific and Technical Information (OSTI.GOV)

James S. Tulenko; Carl D. Crane

The University Research Program in Robotics (URPR) is an integrated group of universities performing fundamental research that addresses broad-based robotics and automation needs of the NNSA Directed Stockpile Work (DSW) and Campaigns. The URPR mission is to provide improved capabilities in robotics science and engineering to meet the future needs of all weapon systems and other associated NNSA/DOE activities.

Principles of Work Sample Testing. 1. A Non-Empirical Taxonomy of Test Uses

DTIC Science & Technology

1979-04-01

ARI TECHNICAL REPORT TR-79-A8 Principles of Work Sample Testingi I. A Non-Empirical Taxonomy of Test Uses b y Robert M. Guion BOWLING GREEN STATE...UNIVERSITY % ’ Bowling Green , Ohio 43403 e April 1979 Contract DAHC 19-77-C-0007 Cj Prepared for U.S. ARMY RESEARCH INSTITUTEfor the BEHAVIORAL and...M./io DAlICl9-77-Cji11J7 * 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT, TASK Bowling Green State UniversityAEAWOKUINMER

Aircraft Engine Nacelle Fire Test Simulator. Volume I. Technical.

DTIC Science & Technology

1980-04-01

THIS IPAa@f[h Daal 3MatfeeJ V .. . . .. --.-- - - -- , • PREFACE This report documents the results of the work efforts under Contract No. F33615-76-C...overview of the simulator and its associated equipment capabilities, as compared to the Contract Work Statement performance goals and baseline concepts, is...duct where it pene- trates the roof, and then transitions into a 18" x 36" rectangular cross section of equal area against the east wall of I-Bay. This

Work Breakdown Structure (WBS) and WBS dictionary. [advanced x ray astrophysics facility (AXAF)

NASA Technical Reports Server (NTRS)

Cocuzzo, F.

1994-01-01

This document is intended to provide the framework for defining all work to be accomplished under the proposed contract for the mission support program as defined by Section J-1 Statement of Work (SOW) of the RFP No.8-1-3-TA-50030 dated 11/2/93. The time period of performance of this contract will be from 3/1/94 through to the end of fiscal 1999. In addition to providing the framework for the integration of the cost, schedule, and manpower planning necessary to accomplish this work it establishes the association among the WBS elements, the SOW, and the Technical Proposal.

The levels of edit. [technical writing in science

NASA Technical Reports Server (NTRS)

Vanburen, R.; Buehler, M. F.; Wallenbrock, D. (Editor)

1976-01-01

The editorial process is analyzed, and five levels of edit are identified. These levels represent cumulative combinations of nine types of edit: (1) coordination, (2) policy, (3) integrity, (4) screening, (5) copy clarification, (6) Mechanical Style, (7) Language, and (9) substantive. The levels and types of edit, although developed for specific use with external reports at the Jet Propulsion Laboratory, cover the general range of technical editing, especially as it applies to an in-house technical publications organization. Each type of edit is set forth in terms of groups of actions to be performed by the editor. The edit-level concept has enhanced understanding and communication among editors, authors, and publications managers concerning the specific editorial work to be done on each manuscript. It has also proved useful as a management tool for estimating and monitoring cost.

Technical Assistance for Southwest Solar Technologies Inc. Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Munoz-Ramos, Karina; Brainard, James Robert; McIntyre, Annie

2012-07-01

Southwest Solar Technologies Inc. is constructing a Solar-Fuel Hybrid Turbine energy system. This innovative energy system combines solar thermal energy with compressed air energy storage and natural gas fuel backup capability to provide firm, non-intermittent power. In addition, the energy system will have very little impact on the environment since, unlike other Concentrated Solar Power (CSP) technologies, it requires minimal water. In 2008 Southwest Solar Technologies received a Solar America Showcase award from the Department of Energy for Technical Assistance from Sandia National Laboratories. This report details the work performed as part of the Solar America Showcase award for Southwestmore » Solar Technologies. After many meetings and visits between Sandia National Labs and Southwest Solar Technologies, several tasks were identified as part of the Technical Assistance and the analysis and results for these are included here.« less

Generic Degraded Congiguration Probability Analysis for DOE Codisposal Waste Package

DOE Office of Scientific and Technical Information (OSTI.GOV)

S.F.A. Deng; M. Saglam; L.J. Gratton

2001-05-23

In accordance with the technical work plan, ''Technical Work Plan For: Department of Energy Spent Nuclear Fuel Work Packages'' (CRWMS M&O 2000c), this Analysis/Model Report (AMR) is developed for the purpose of screening out degraded configurations for U.S. Department of Energy (DOE) spent nuclear fuel (SNF) types. It performs the degraded configuration parameter and probability evaluations of the overall methodology specified in the ''Disposal Criticality Analysis Methodology Topical Report'' (YMP 2000, Section 3) to qualifying configurations. Degradation analyses are performed to assess realizable parameter ranges and physical regimes for configurations. Probability calculations are then performed for configurations characterized by k{submore » eff} in excess of the Critical Limit (CL). The scope of this document is to develop a generic set of screening criteria or models to screen out degraded configurations having potential for exceeding a criticality limit. The developed screening criteria include arguments based on physical/chemical processes and probability calculations and apply to DOE SNF types when codisposed with the high-level waste (HLW) glass inside a waste package. The degradation takes place inside the waste package and is long after repository licensing has expired. The emphasis of this AMR is on degraded configuration screening and the probability analysis is one of the approaches used for screening. The intended use of the model is to apply the developed screening criteria to each DOE SNF type following the completion of the degraded mode criticality analysis internal to the waste package.« less

An Analysis of Factors Related to Retirement Intentions of Upper Level Civil Service Employees in the Air Force.

DTIC Science & Technology

1986-09-01

workforce that is incapable of performing organizational objectives (Humple and Lyons , 1983; Tucker, 1985). . Research into retirement within the federal...organization (Donnelly, Gibson, Ivancevich ; 1984). The present study focuses on civilian middle managers, GM13 to GMI5, within technical career fields...Masson, Demestree, and Lyon ; 1979). The second study performed a factorial analysis on data from 457 respondents between the ages of 25 to 64 that worked

Analogue prototypes for Lunar and Mars exploration.

PubMed

Stuster, Jack

2005-06-01

Small groups living and working in isolation and confinement experience unique stressors that have predictable effects on individual adjustment and performance. Because the stress is cumulative, long-duration missions impose considerable burdens on an individual's capacity to adjust to the conditions and to perform well, both technically and socially. This paper describes research conducted to extrapolate design and procedural guidelines for lunar and planetary expeditions from a review of information concerning previous expeditions and voyages of discovery.

Technical Leadership Development Program-Year 3

DTIC Science & Technology

2012-08-30

Develop an understanding of why achieving technology-based competitive advantage can be part of firm’s business strategy.  Review the Porter Model ...NUMBER H98230-08-D-0171 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) Gavito /Dr. Valentin 5d. PROJECT NUMBER RT 4-3 5e. TASK...NUMBER WHS TO009 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) Stevens Institute of Technology 8. PERFORMING ORGANIZATION

TRU Waste Management Program. Cost/schedule optimization analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Detamore, J.A.; Raudenbush, M.H.; Wolaver, R.W.

This Current Year Work Plan presents in detail a description of the activities to be performed by the Joint Integration Office Rockwell International (JIO/RI) during FY86. It breaks down the activities into two major work areas: Program Management and Program Analysis. Program Management is performed by the JIO/RI by providing technical planning and guidance for the development of advanced TRU waste management capabilities. This includes equipment/facility design, engineering, construction, and operations. These functions are integrated to allow transition from interim storage to final disposition. JIO/RI tasks include program requirements identification, long-range technical planning, budget development, program planning document preparation, taskmore » guidance development, task monitoring, task progress information gathering and reporting to DOE, interfacing with other agencies and DOE lead programs, integrating public involvement with program efforts, and preparation of reports for DOE detailing program status. Program Analysis is performed by the JIO/RI to support identification and assessment of alternatives, and development of long-term TRU waste program capabilities. These analyses include short-term analyses in response to DOE information requests, along with performing an RH Cost/Schedule Optimization report. Systems models will be developed, updated, and upgraded as needed to enhance JIO/RI's capability to evaluate the adequacy of program efforts in various fields. A TRU program data base will be maintained and updated to provide DOE with timely responses to inventory related questions.« less

Role of medical, technical, and administrative leadership in the human resource management life cycle: a team approach to laboratory management.

PubMed

Wilkinson, D S; Dilts, T J

1999-01-01

We believe the team approach to laboratory management achieves the best outcomes. Laboratory management requires the integration of medical, technical, and administrative expertise to achieve optimal service, quality, and cost performance. Usually, a management team of two or more individuals must be assembled to achieve all of these critical leadership functions. The individual members of the management team must possess the requisite expertise in clinical medicine, laboratory science, technology management, and administration. They also must work together in a unified and collaborative manner, regardless of where individual team members appear on the organizational chart. The management team members share in executing the entire human resource management life cycle, creating the proper environment to maximize human performance. Above all, the management team provides visionary and credible leadership.

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study

PubMed Central

2012-01-01

Background The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. Method We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. Results In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were ‘technically oriented’, ‘improvising’ or ‘socially oriented’. Conclusion We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools. PMID:23256484

The socio-technical organisation of community pharmacies as a factor in the Electronic Prescription Service Release Two implementation: a qualitative study.

PubMed

Harvey, Jasmine; Avery, Anthony J; Waring, Justin; Barber, Nick

2012-12-20

The introduction of a new method of transmitting prescriptions from general practices to community pharmacies in England (Electronic Prescription Service Release 2 (EPS2)) has generated debate on how it will change work practice. As EPS2 will be a key technical element in dispensing, we reviewed the literature to find that there were no studies on how social and technical elements come together to form work practice in community pharmacies. This means the debate has little point of reference. Our aim therefore was to study the ways social and technical elements of a community pharmacy are used to achieve dispensing through the development of a conceptual model on pharmacy work practice, and to consider how a core technical element such the EPS2 could change work practice. We used ethnographic methods inclusive of case-study observations and interviews to collect qualitative data from 15 community pharmacies that were in the process of adopting or were soon to adopt EPS2. We analysed the case studies thematically and used rigorous multi-dimensional and multi-disciplinary interpretive validation techniques to cross analyse findings. In practice, dispensing procedures were not designed to take into account variations in human and technical integration, and assumed that repetitive and collective use of socio-technical elements were at a constant. Variables such as availability of social and technical resources, and technical know-how of staff were not taken into account in formalised procedures. Yet community pharmacies were found to adapt their dispensing in relation to the balance of social and technical elements available, and how much of the social and technical elements they were willing to integrate into dispensing. While some integrated as few technical elements as possible, some depended entirely on technical artefacts. This pattern also applied to the social elements of dispensing. Through the conceptual model development process, we identified three approaches community pharmacies used to appropriate procedures in practice. These were 'technically oriented', 'improvising' or 'socially oriented'. We offer a model of different work approaches community pharmacies use to dispense, which suggests that when adopting a core technical element such as the EPS2 system of dispensing there could be variations in its successful adoption. Technically oriented pharmacies might find it easiest to integrate a similar artefact into work practice although needs EPS2 to synchronise effectively with existing technologies. Pharmacies adopting an improvising-approach have the potential to improve how they organise dispensing through EPS2 although they will need to improve how they apply their operating procedures. Socially oriented pharmacies will need to dramatically adapt their approach to dispensing since they usually rely on few technical tools.

Training safer orthopedic surgeons. Construct validation of a virtual-reality simulator for hip fracture surgery.

PubMed

Akhtar, Kashif; Sugand, Kapil; Sperrin, Matthew; Cobb, Justin; Standfield, Nigel; Gupte, Chinmay

2015-01-01

Virtual-reality (VR) simulation in orthopedic training is still in its infancy, and much of the work has been focused on arthroscopy. We evaluated the construct validity of a new VR trauma simulator for performing dynamic hip screw (DHS) fixation of a trochanteric femoral fracture. 30 volunteers were divided into 3 groups according to the number of postgraduate (PG) years and the amount of clinical experience: novice (1-4 PG years; less than 10 DHS procedures); intermediate (5-12 PG years; 10-100 procedures); expert (> 12 PG years; > 100 procedures). Each participant performed a DHS procedure and objective performance metrics were recorded. These data were analyzed with each performance metric taken as the dependent variable in 3 regression models. There were statistically significant differences in performance between groups for (1) number of attempts at guide-wire insertion, (2) total fluoroscopy time, (3) tip-apex distance, (4) probability of screw cutout, and (5) overall simulator score. The intermediate group performed the procedure most quickly, with the lowest fluoroscopy time, the lowest tip-apex distance, the lowest probability of cutout, and the highest simulator score, which correlated with their frequency of exposure to running the trauma lists for hip fracture surgery. This study demonstrates the construct validity of a haptic VR trauma simulator with surgeons undertaking the procedure most frequently performing best on the simulator. VR simulation may be a means of addressing restrictions on working hours and allows trainees to practice technical tasks without putting patients at risk. The VR DHS simulator evaluated in this study may provide valid assessment of technical skill.

Characterization of Atmospheric Aerosol Behavior and Climatic Effects by Analysis of SAGE 2 and Other Space, Air, and Ground Measurements

NASA Technical Reports Server (NTRS)

Livingston, John M.

1999-01-01

This report documents the research performed under NASA Ames Cooperative Agreement NCC 2-991, which covered the period 1 April 1997 through 31 March 1999. Previously, an interim technical report (Technical Report No. 1, 20 March 1998) summarized the work completed during the period 1 April 1997 through 31 March 1998. The objective of the proposed research was to advance our understanding of atmospheric aerosol behavior, aerosol-induced climatic effects, and the remote measurement and retrieval capabilities of spaceborne sensors such as SAGE II by combining and comparing data from these instruments and from airborne and ground-based instruments.

NASA Research Announcement Phase 1 Report and Phase 2 Proposal for the Development of a Power Assisted Space Suit Glove Assembly

NASA Technical Reports Server (NTRS)

Cadogan, Dave; Lingo, Bob

1996-01-01

In July of 1996, ILC Dover was awarded Phase 1 of a contract for NASA to develop a prototype Power Assisted Space Suit glove to enhance the performance of astronauts during Extra-Vehicular Activity (EVA). This report summarizes the work performed to date on Phase 1, and details the work to be conducted on Phase 2 of the program. Phase 1 of the program consisted of research and review of related technical sources, concept brainstorming, baseline design development, modeling and analysis, component mock-up testing, and test data analysis. ILC worked in conjunction with the University of Maryland's Space Systems Laboratory (SSL) to develop the power assisted glove. Phase 2 activities will focus on the design maturation and the manufacture of a working prototype system. The prototype will be tested and evaluated in conjunction with existing space suit glove technology to determine the performance enhancement anticipated with the implementation of the power assisted joint technology in space suit gloves.

77 FR 30473 - Notice of Intent To Revise Stormwater Regulations To Specify That an NPDES Permit Is Not Required...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-23

... submit for approval by the Washington Department of Natural Resources (DNR) a Road Maintenance and... potential road maintenance problems. While the program is enforceable, the state focuses first on technical... the maintenance of roads within and near the public lands and perform that work, in part, by...

Training New Instructors to Implement Discrete Trial Teaching Strategies with Children with Autism in a Community-Based Intervention Program

ERIC Educational Resources Information Center

Downs, Andrew; Downs, Robyn Conley

2013-01-01

The effects of training and supervision on instructor knowledge and performance of discrete trial teaching (DTT) within three domains (DTT Technical Skills; Work Session Preparation/Conclusion; and Student Engagement/Management) were examined in this study. Eight undergraduate student instructors received an 8-[hour] training in DTT and support…

Expert systems research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duda, R.O.; Shortliffe, E.H.

1983-04-15

Artificial intelligence, long a topic of basic computer science research, is now being applied to problems of scientific, technical, and commercial interest. Some consultation programs although limited in versatility, have achieved levels of performance rivaling those of human experts. A collateral benefit of this work is the systematization of previously unformalized knowledge in areas such as medical diagnosis and geology. 30 references.

ALS rocket engine combustion devices design and demonstration

NASA Technical Reports Server (NTRS)

Arreguin, Steve

1989-01-01

Work performed during Phase one is summarized and the significant technical and programmatic accomplishments occurring during this period are documented. Besides a summary of the results, methodologies, trade studies, design, fabrication, and hardware conditions; the following are included: the evolving Maintainability Plan, Reliability Program Plan, Failure Summary and Analysis Report, and the Failure Mode and Effect Analysis.

The Effects of Varying Schedules of Incentive Delivery on Technical Training.

ERIC Educational Resources Information Center

Pritchard, Robert D.; And Others

The research reported here was initiated and designed to assess the impact of various schedules of incentive delivery (schedules of reinforcement) on performance and attitudes in an Air Force-related setting. Civilian subjects matching the characteristics of Air Force trainees were hired to work for four weeks, one week under each of four…

An Annotated Selective Bibliography on Human Performance in Fault Diagnosis Tasks. Technical Report 435. Final Report.

ERIC Educational Resources Information Center

Johnson, William B.; And Others

This annotated bibliography developed in connection with an ongoing investigation of the use of computer simulations for fault diagnosis training cites 61 published works taken predominantly from the disciplines of engineering, psychology, and education. A review of the existing literature included computer searches of the past ten years of…

Validating the Use of pPerformance Risk Indices for System-Level Risk and Maturity Assessments

NASA Astrophysics Data System (ADS)

Holloman, Sherrica S.

With pressure on the U.S. Defense Acquisition System (DAS) to reduce cost overruns and schedule delays, system engineers' performance is only as good as their tools. Recent literature details a need for 1) objective, analytical risk quantification methodologies over traditional subjective qualitative methods -- such as, expert judgment, and 2) mathematically rigorous system-level maturity assessments. The Mahafza, Componation, and Tippett (2005) Technology Performance Risk Index (TPRI) ties the assessment of technical performance to the quantification of risk of unmet performance; however, it is structured for component- level data as input. This study's aim is to establish a modified TPRI with systems-level data as model input, and then validate the modified index with actual system-level data from the Department of Defense's (DoD) Major Defense Acquisition Programs (MDAPs). This work's contribution is the establishment and validation of the System-level Performance Risk Index (SPRI). With the introduction of the SPRI, system-level metrics are better aligned, allowing for better assessment, tradeoff and balance of time, performance and cost constraints. This will allow system engineers and program managers to ultimately make better-informed system-level technical decisions throughout the development phase.

Single Operator Control of Multiple UAS: A Supervisory Delegation Approach

NASA Technical Reports Server (NTRS)

Shively, Jay

2017-01-01

This presentation will be given as part of the UAS EXCOM Science and Research Panel's (SARP) workshop on multiple UAS controlled by a single operator. Participants were asked to identify public use cases for multiple Unmanned Aircraft Systems (UAS) control and identify research, policy, and technical gaps in those operations. The purpose of this workshop is to brainstorm, categorize, and prioritize those use cases and gaps. Here, I will discuss research performed on this topic when I worked for the Army and on-going work within the division and a NATO working group on Human-Autonomy Teaming.

Single Operator Control of Multiple UAS: A Supervisory Delegation Approach

NASA Technical Reports Server (NTRS)

Shively, Jay

2017-01-01

This presentation will be given as part of the UAS EXCOM Science and Research Panel's (SARP) workshop on multiple UAS controlled by a single operator. Participants were asked to identify public use cases for multiple UAS control and identify research, policy and technical gaps in those operations. The purpose of this workshop is to brainstorm, categorize and prioritize those use canses and gaps. Here, I will discuss research performed on this topic when I worked for the Army and on-going work within the division and a NATO working group on Human-Autonomy Teaming.

Novel Damping Concepts for Mechanical Backup Bearings and Passive Magnetically Suspended Rotors

NASA Technical Reports Server (NTRS)

Keith, Theo G., Jr.

2003-01-01

The following summarizes the research accomplished under the titled project. The period of research extended from August 2001 to August 2002. The team of researchers consisted of two Senior Research Associates: Mark Siebert and Carl Buccieri. one PhD student: Pete Kenney and one faculty member: Theo Keith, who was the P.I. Karen Balog was the Program Coordinator. The research was performed at both the NASA Glenn Research Center (GRC) in Cleveland, Ohio and at the University of Toledo. Accordingly, periodic group telephone meetings were held with the team members, the NASA technical coordinators and several other University of Toledo researchers working on-site at GRC. Two passive magnetic bearing test rigs were designed and tested as a result of the work of this NRA. Additionally, two technical papers, based on this effort, were generated and are currently being reviewed.

Landlord project multi-year program plan, fiscal year 1999, WBS 1.5

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dallas, M.D.

The MYWP technical baseline describes the work to be accomplished by the Project and the technical standards which govern that work. The mission of Landlord Project is to provide more maintenance replacement of general infrastructure facilities and systems to facilitate the Hanford Site cleanup mission. Also, once an infrastructure facility or system is no longer needed the Landlord Project transitions the facility to final closure/removal through excess, salvage or demolition. Landlord Project activities will be performed in an environmentally sound, safe, economical, prudent, and reliable manner. The Landlord Project consists of the following facilities systems: steam, water, liquid sanitary waste,more » electrical distribution, telecommunication, sanitary landfill, emergency services, general purpose offices, general purpose shops, general purpose warehouses, environmental supports facilities, roads, railroad, and the site land. The objectives for general infrastructure support are reflected in two specific areas, (1) Core Infrastructure Maintenance, and (2) Infrastructure Risk Mitigation.« less

The Present Status of Siam Photon Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pairsuwan, Weerapong; Ishii, Takehiko; Isoyama, Goro

We report the technical problems encountered in commissioning and improving the performance of the accelerator complex which consists of a 1 GeV light source storage ring, a 1 GeV booster synchrotron, and a 40 MeV injector linac. Regulation work for an attached beam line with an experimental station for photoemission studies is also described. Beam instability and low injection efficiency are the major issues for the accelerator complex. In the beam line, the accurate optical alignment of the monochromator system and the modification of the measurement control software supplied by a marker are the work having been performed. The resultsmore » of the work on the accelerator complex will be helpful to the commissioning of the machine obtained secondhand and reformed to some extent.« less

Biodiesel Performance with Modern Engines. Cooperative Research and Development Final Report, CRADA Number CRD-05-153

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCormick, Robert

NREL and the National Biodiesel Board (NBB) will work cooperatively to assess the effects of biodiesel blends on the performance of modern diesel engines and emissions control systems meeting increasingly strict emissions standards. This work will include research to understand the impact of biodiesel blends on the operation and durability of particle filters and NOx control sorbents/catalysts, to quantify the effect on emission control systems performance, and to understand effects on engine component durability. Work to assess the impact of biodiesel blends on real world fleet operations will be performed. Also, research to develop appropriate ASTM standards for biodiesel qualitymore » and stability will be conducted. The cooperative project will involve engine testing and fleet evaluation studies at NREL using biodiesel from a variety of sources. In addition, NREL will work with NBB to set up an Industrial Steering Committee to design the scope for the various projects and to provide technical oversight to these projects. NREL and NBB will cooperatively communicate the study results to as broad an audience as possible.« less

Simulation for the training of human performance and technical skills: the intersection of how we will train health care professionals in the future.

PubMed

Hamman, William R; Beaubien, Jeffrey M; Beaudin-Seiler, Beth M

2009-12-01

The aims of this research are to begin to understand health care teams in their operational environment, establish metrics of performance for these teams, and validate a series of scenarios in simulation that elicit team and technical skills. The focus is on defining the team model that will function in the operational environment in which health care professionals work. Simulations were performed across the United States in 70- to 1000-bed hospitals. Multidisciplinary health care teams analyzed more than 300 hours of videos of health care professionals performing simulations of team-based medical care in several different disciplines. Raters were trained to enhance inter-rater reliability. The study validated event sets that trigger team dynamics and established metrics for team-based care. Team skills were identified and modified using simulation scenarios that employed the event-set-design process. Specific skills (technical and team) were identified by criticality measurement and task analysis methodology. In situ simulation, which includes a purposeful and Socratic Method of debriefing, is a powerful intervention that can overcome inertia found in clinician behavior and latent environmental systems that present a challenge to quality and patient safety. In situ simulation can increase awareness of risks, personalize the risks, and encourage the reflection, effort, and attention needed to make changes to both behaviors and to systems.

Simulation experience enhances physical therapist student confidence in managing a patient in the critical care environment.

PubMed

Ohtake, Patricia J; Lazarus, Marcilene; Schillo, Rebecca; Rosen, Michael

2013-02-01

Rehabilitation of patients in critical care environments improves functional outcomes. This finding has led to increased implementation of intensive care unit (ICU) rehabilitation programs, including early mobility, and an associated increased demand for physical therapists practicing in ICUs. Unfortunately, many physical therapists report being inadequately prepared to work in this high-risk environment. Simulation provides focused, deliberate practice in safe, controlled learning environments and may be a method to initiate academic preparation of physical therapists for ICU practice. The purpose of this study was to examine the effect of participation in simulation-based management of a patient with critical illness in an ICU setting on levels of confidence and satisfaction in physical therapist students. A one-group, pretest-posttest, quasi-experimental design was used. Physical therapist students (N=43) participated in a critical care simulation experience requiring technical (assessing bed mobility and pulmonary status), behavioral (patient and interprofessional communication), and cognitive (recognizing a patient status change and initiating appropriate responses) skill performance. Student confidence and satisfaction were surveyed before and after the simulation experience. Students' confidence in their technical, behavioral, and cognitive skill performance increased from "somewhat confident" to "confident" following the critical care simulation experience. Student satisfaction was highly positive, with strong agreement the simulation experience was valuable, reinforced course content, and was a useful educational tool. Limitations of the study were the small sample from one university and a control group was not included. Incorporating a simulated, interprofessional critical care experience into a required clinical course improved physical therapist student confidence in technical, behavioral, and cognitive performance measures and was associated with high student satisfaction. Using simulation, students were introduced to the critical care environment, which may increase interest in working in this practice area.

[Locoregional anesthesia for pediatric surgery in remote rural settings: experience of an NGO in Bangladesh].

PubMed

Sleth, J C; Coulon, M; Fesseau, R; Rami, L

2010-12-01

Performing safe pediatric anesthesia in developing countries is a technical challenge for NGOs working in remote locations. The aim of this study is to describe our experience aboard a hospital ship working off the coast of northern Bangladesh. Anesthesia protocol records for a 3-year period were retrospectively reviewed. A total of 463 procedures were performed with no severe anesthetic complications. Regional anesthesia was performed in 83% of patients. It was carried out alone in 15% of patients and in association with IV or IM ketamine sedation in 68%. General anesthesia was performed using ketamine in 17% of patients. Tracheal intubation was carried out in only 3 cases. These findings indicate that regional anesthesia in association with ketamine as sedation agent is a simple and safe technique for pediatric anesthesia in remote rural settings.

Performance measurement: A tool for program control

NASA Technical Reports Server (NTRS)

Abell, Nancy

1994-01-01

Performance measurement is a management tool for planning, monitoring, and controlling as aspects of program and project management--cost, schedule, and technical requirements. It is a means (concept and approach) to a desired end (effective program planning and control). To reach the desired end, however, performance measurement must be applied and used appropriately, with full knowledge and recognition of its power and of its limitations--what it can and cannot do for the project manager. What is the potential of this management tool? What does performance measurement do that a traditional plan vs. actual technique cannot do? Performance measurement provides an improvement over the customary comparison of how much money was spent (actual cost) vs. how much was planned to be spent based on a schedule of activities (work planned). This commonly used plan vs. actual comparison does not allow one to know from the numerical data if the actual cost incurred was for work intended to be done.

What Consultation and Freelance Writing Can Do for You and for Your Students.

ERIC Educational Resources Information Center

Muller, John A.

This paper advises teachers of technical writing to "practice what they preach" by occasionally doing field work in technical communication. The possibilities for off-campus work include consultation, perhaps for an in-house manual of technical writing procedures and skills, editing assignments for businesses and public agencies, and freelance…

Introduction to Technical Services. Seventh Edition. Library and Information Science Text Series.

ERIC Educational Resources Information Center

Evans, G. Edward; Intner, Sheila S.; Weihs, Jean

This updated edition covers all aspects of library technical services--from acquisitions to managing the cataloging department--with new emphasis on automation as it affects technical services work and those skills that can be developed through work experience or classroom instruction. Part One, General Background, consists of four chapters that…

Cardiovascular Surgery Residency Program: Training Coronary Anastomosis Using the Arroyo Simulator and UNIFESP Models.

PubMed

Maluf, Miguel Angel; Gomes, Walter José; Bras, Ademir Massarico; Araújo, Thiago Cavalcante Vila Nova de; Mota, André Lupp; Cardoso, Caio Cesar; Coutinho, Rafael Viana dos S

2015-01-01

Engage the UNIFESP Cardiovascular Surgery residents in coronary anastomosis, assess their skills and certify results, using the Arroyo Anastomosis Simulator and UNIFESP surgical models. First to 6th year residents attended a weekly program of technical training in coronary anastomosis, using 4 simulation models: 1. Arroyo simulator; 2. Dummy with a plastic heart; 3. Dummy with a bovine heart; and 4. Dummy with a beating pig heart. The assessment test was comprised of 10 items, using a scale from 1 to 5 points in each of them, creating a global score of 50 points maximum. The technical performance of the candidate showed improvement in all items, especially manual skill and technical progress, critical sense of the work performed, confidence in the procedure and reduction of the time needed to perform the anastomosis after 12 weeks practice. In response to the multiplicity of factors that currently influence the cardiovascular surgeon training, there have been combined efforts to reform the practices of surgical medical training. 1 - The four models of simulators offer a considerable contribution to the field of cardiovascular surgery, improving the skill and dexterity of the surgeon in training. 2 - Residents have shown interest in training and cooperate in the development of innovative procedures for surgical medical training in the art.

Cardiovascular Surgery Residency Program: Training Coronary Anastomosis Using the Arroyo Simulator and UNIFESP Models

PubMed Central

Maluf, Miguel Angel; Gomes, Walter José; Bras, Ademir Massarico; de Araújo, Thiago Cavalcante Vila Nova; Mota, André Lupp; Cardoso, Caio Cesar; Coutinho, Rafael Viana dos S.

2015-01-01

OBJECTIVE Engage the UNIFESP Cardiovascular Surgery residents in coronary anastomosis, assess their skills and certify results, using the Arroyo Anastomosis Simulator and UNIFESP surgical models. METHODS First to 6th year residents attended a weekly program of technical training in coronary anastomosis, using 4 simulation models: 1. Arroyo simulator; 2. Dummy with a plastic heart; 3. Dummy with a bovine heart; and 4. Dummy with a beating pig heart. The assessment test was comprised of 10 items, using a scale from 1 to 5 points in each of them, creating a global score of 50 points maximum. RESULTS The technical performance of the candidate showed improvement in all items, especially manual skill and technical progress, critical sense of the work performed, confidence in the procedure and reduction of the time needed to perform the anastomosis after 12 weeks practice. In response to the multiplicity of factors that currently influence the cardiovascular surgeon training, there have been combined efforts to reform the practices of surgical medical training. CONCLUSION 1 - The four models of simulators offer a considerable contribution to the field of cardiovascular surgery, improving the skill and dexterity of the surgeon in training. 2 - Residents have shown interest in training and cooperate in the development of innovative procedures for surgical medical training in the art. PMID:26735604

Design of mathematical models assessment of working achievements based on spencer competency in PT. Z

NASA Astrophysics Data System (ADS)

Siregar, K.; Siregar, S. F.

2018-02-01

This research is design employee performance assessment by considering work result of employee based on competency. Relevant competencies are identified according to Spencer’s competence of employees that subsequently processed by Analytical Hierarchy Process (AHP) method. The results of weighting AHP indicate the highest priority order of criteria, there are; concern of customer satisfaction (0.1325), group work (0.1324) and technical expertise (0.0826). The weight of the criteria is used to design the Work Performance Value (WPV) to be used as the basis for calculating the incentive index. The higher incentive index of an employee, the greater amount of incentives was earned. The calculation of incentives is made to four employees of chopsticks production. From employee incentives A, B, C and D, employee D has the highest incentive index and increment of IDR 2,700,675 compared to previous incentive system. The incentive division system based on the Work Performance Values (WPV) of this proposal reflects a real incentive so that the incapacity of incentive can be reduced.

Helios: Understanding Solar Evolution Through Text Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Randazzese, Lucien

This proof-of-concept project focused on developing, testing, and validating a range of bibliometric, text analytic, and machine-learning based methods to explore the evolution of three photovoltaic (PV) technologies: Cadmium Telluride (CdTe), Dye-Sensitized solar cells (DSSC), and Multi-junction solar cells. The analytical approach to the work was inspired by previous work by the same team to measure and predict the scientific prominence of terms and entities within specific research domains. The goal was to create tools that could assist domain-knowledgeable analysts in investigating the history and path of technological developments in general, with a focus on analyzing step-function changes in performance,more » or “breakthroughs,” in particular. The text-analytics platform developed during this project was dubbed Helios. The project relied on computational methods for analyzing large corpora of technical documents. For this project we ingested technical documents from the following sources into Helios: Thomson Scientific Web of Science (papers), the U.S. Patent & Trademark Office (patents), the U.S. Department of Energy (technical documents), the U.S. National Science Foundation (project funding summaries), and a hand curated set of full-text documents from Thomson Scientific and other sources.« less

Exploration Medical System Technical Architecture Overview

NASA Technical Reports Server (NTRS)

Cerro, J.; Rubin, D.; Mindock, J.; Middour, C.; McGuire, K.; Hanson, A.; Reilly, J.; Burba, T.; Urbina, M.

2018-01-01

The Exploration Medical Capability (ExMC) Element Systems Engineering (SE) goals include defining the technical system needed to support medical capabilities for a Mars exploration mission. A draft medical system architecture was developed based on stakeholder needs, system goals, and system behaviors, as captured in an ExMC concept of operations document and a system model. This talk will discuss a high-level view of the medical system, as part of a larger crew health and performance system, both of which will support crew during Deep Space Transport missions. Other mission components, such as the flight system, ground system, caregiver, and patient, will be discussed as aspects of the context because the medical system will have important interactions with each. Additionally, important interactions with other aspects of the crew health and performance system are anticipated, such as health & wellness, mission task performance support, and environmental protection. This talk will highlight areas in which we are working with other disciplines to understand these interactions.

Technical performance and match-to-match variation in elite football teams.

PubMed

Liu, Hongyou; Gómez, Miguel-Angel; Gonçalves, Bruno; Sampaio, Jaime

2016-01-01

Recent research suggests that match-to-match variation adds important information to performance descriptors in team sports, as it helps measure how players fine-tune their tactical behaviours and technical actions to the extreme dynamical environments. The current study aims to identify the differences in technical performance of players from strong and weak teams and to explore match-to-match variation of players' technical match performance. Performance data of all the 380 matches of season 2012-2013 in the Spanish First Division Professional Football League were analysed. Twenty-one performance-related match actions and events were chosen as variables in the analyses. Players' technical performance profiles were established by unifying count values of each action or event of each player per match into the same scale. Means of these count values of players from Top3 and Bottom3 teams were compared and plotted into radar charts. Coefficient of variation of each match action or event within a player was calculated to represent his match-to-match variation of technical performance. Differences in the variation of technical performances of players across different match contexts (team and opposition strength, match outcome and match location) were compared. All the comparisons were achieved by the magnitude-based inferences. Results showed that technical performances differed between players of strong and weak teams from different perspectives across different field positions. Furthermore, the variation of the players' technical performance is affected by the match context, with effects from team and opposition strength greater than effects from match location and match outcome.

Final Report for Annex II--Assessment of Solar Radiation Resources In Saudi Arabia, 1998-2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Myers, D. R.; Wilcox, S. M.; Marion, W. F.

2002-04-01

The Final Report for Annex II - Assessment of Solar Radiation Resources in Saudi Arabia 1998-2000 summarizes the accomplishment of work performed, results achieved, and products produced under Annex II, a project established under the Agreement for Cooperation in the Field of Renewable Energy Research and Development between the Kingdom of Saudi Arabia and the United States. The report covers work and accomplishments from January 1998 to December 2000. A previous progress report, Progress Report for Annex II - Assessment of Solar Radiation Resources in Saudi Arabia 1993-1997, NREL/TP-560-29374, summarizes earlier work and technical transfer of information under the project.more » The work was performed in at the National Renewable Energy Laboratory (NREL) in Golden, Colorado, at the King Abdulaziz City for Science and Technology (KACST) in Riyadh, Saudi Arabia, and at selected weather stations of the Saudi Meteorological and Environmental Protection Administration (MEPA).« less

Neutron and gamma (density) logging in welded tuff

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, W

This Technical Implementation Procedure (TIP) describes the field operation, and the management of data records pertaining to neutron logging and density logging in welded tuff. This procedure applies to all borehole surveys performed in support of Engineered Barrier System Field Tests (EBSFT), including the Earge Block Tests (LBT) and Initial Engineered Barrier System Field Tests (IEBSFT) - WBS 1.2.3.12.4. The purpose of this TIP is to provide guidelines so that other equally trained and qualified personnel can understand how the work is performed or how to repeat the work if needed. The work will be documented by the use ofmore » Scientific Notebooks (SNs) as discussed in 033-YMP-QP 3.4. The TIP will provide a set of guidelines which the scientists will take into account in conducting the mea- surements. The use of this TIP does not imply that this is repetitive work that does not require profes- sional judgment.« less

Building America Industrialized Housing Partnership (BAIHP II)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abernethy, Bob; Chandra, Subrato; Baden, Steven

2010-11-30

This report summarizes the work conducted by the Building America Industrialized Housing Partnership (BAIHP - www.baihp.org) during the final budget period (BP5) of our contract, January 1, 2010 to November 30, 2010. Highlights from the four previous budget periods are included for context. BAIHP is led by the Florida Solar Energy Center (FSEC) of the University of Central Florida. With over 50 Industry Partners including factory and site builders, work in BP5 was performed in six tasks areas: Building America System Research Management, Documentation and Technical Support; System Performance Evaluations; Prototype House Evaluations; Initial Community Scale Evaluations; Project Closeout, Finalmore » Review of BA Communities; and Other Research Activities.« less

A Correlation Between Quality Management Metrics and Technical Performance Measurement

DTIC Science & Technology

2007-03-01

Engineering Working Group SME Subject Matter Expert SoS System of Systems SPI Schedule performance Index SSEI System of Systems Engineering and...and stated as such [Q, M , M &G]. The QMM equation is given by: 12 QMM=0.92RQM+0.67EPM+0.55RKM+1.86PM, where: RGM is the requirements management...schedule. Now if corrective action is not taken, the project/task will be completed behind schedule and over budget. m . As well as the derived

Environmental Assessment for the Construction of the United States Air Force Technical Application Center (AFTAC) on Patrick Air Force Base, Florida

DTIC Science & Technology

2009-12-01

GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S...AND ADDRESS(ES) 45 Civil Engineer Squadron (45 CES/CEVP),1224 Jupiter Street,Patrick AFB,FL,32925 8. PERFORMING ORGANIZATION REPORT NUMBER 9...Quality Requirements Law or Rule Permit/Action(s) Requirement Agency or Organization AFI 32-7086, Chapter 4 Minimize loss and conduct recovery

The fractured landscape of RNA-seq alignment: the default in our STARs.

PubMed

Ballouz, Sara; Dobin, Alexander; Gingeras, Thomas R; Gillis, Jesse

2018-06-01

Many tools are available for RNA-seq alignment and expression quantification, with comparative value being hard to establish. Benchmarking assessments often highlight methods' good performance, but are focused on either model data or fail to explain variation in performance. This leaves us to ask, what is the most meaningful way to assess different alignment choices? And importantly, where is there room for progress? In this work, we explore the answers to these two questions by performing an exhaustive assessment of the STAR aligner. We assess STAR's performance across a range of alignment parameters using common metrics, and then on biologically focused tasks. We find technical metrics such as fraction mapping or expression profile correlation to be uninformative, capturing properties unlikely to have any role in biological discovery. Surprisingly, we find that changes in alignment parameters within a wide range have little impact on both technical and biological performance. Yet, when performance finally does break, it happens in difficult regions, such as X-Y paralogs and MHC genes. We believe improved reporting by developers will help establish where results are likely to be robust or fragile, providing a better baseline to establish where methodological progress can still occur.

Non-technical skills of the operating theatre scrub nurse: literature review.

PubMed

Mitchell, Lucy; Flin, Rhona

2008-07-01

This paper is a report of a review to identify the non-technical (cognitive and social) skills used by scrub nurses. Recognition that failures in non-technical skills contributed to accidents in high-risk industries led to the development of research programmes to study the role of cognition and social interactions in operational safety. Recently, psychological research in operating theatres has revealed the importance of non-technical skills in safe and efficient performance. Most of the studies to date have focused on anaesthetists and surgeons. On-line sources and university library catalogues, publications of the Association for Perioperative Practice, National Association of Theatre Nurses and Association of Peri-Operative Registered Nurses were searched in 2007. Studies were included in the review if they presented data from scrub nurses on one or more of their non-technical skills. These findings were examined in relation to an existing medical non-technical skills framework with categories of communication, teamwork, leadership, situation awareness and decision-making. Of 424 publications retrieved, 13 were reviewed in detail. Ten concerned communication and eight of those also had data on teamwork. In 11 papers teamwork was examined, and one focused on nurses' situation awareness, teamwork and communication. None of the papers we reviewed examined leadership or decision-making by scrub nurses. Further work is needed to identify formally the non-technical skills which are important to the role of scrub nurse and then to design training in the identified non-technical skills during the education and development of scrub nurses.

The Development and Implementation of a School-to-Work Apprenticeship Model at a Technical Career Center.

ERIC Educational Resources Information Center

Kraft, James A.

A business and education partnership model addressed a shortage of local, qualified, entry-level, technically skilled workers through a school-to-work apprenticeship program at the North Montco Technical Career Center in Lansdale, Pennsylvania. The research-based solution plan of the Pennsylvania Youth Apprenticeship Program (PYAP) included three…

The Community/Technical College and Community Economic Development: No Longer a Matter of Choice!

ERIC Educational Resources Information Center

Cline, Larry; Kepner, Jim

The Sumter Office of Economic Development and Central Carolina Technical College (South Carolina) formed a partnership to help increase the technical skills of the local work force. Industry surveys, questionnaires, and on-site visits revealed that employers were discouraged with the inadequate work force pool, and that those coming from secondary…

Systems and technologies for objective evaluation of technical skills in laparoscopic surgery.

PubMed

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M; Oropesa, Ignacio; Gómez, Enrique J

2014-01-01

Minimally invasive surgery is a highly demanding surgical approach regarding technical requirements for the surgeon, who must be trained in order to perform a safe surgical intervention. Traditional surgical education in minimally invasive surgery is commonly based on subjective criteria to quantify and evaluate surgical abilities, which could be potentially unsafe for the patient. Authors, surgeons and associations are increasingly demanding the development of more objective assessment tools that can accredit surgeons as technically competent. This paper describes the state of the art in objective assessment methods of surgical skills. It gives an overview on assessment systems based on structured checklists and rating scales, surgical simulators, and instrument motion analysis. As a future work, an objective and automatic assessment method of surgical skills should be standardized as a means towards proficiency-based curricula for training in laparoscopic surgery and its certification.

Towards Development of Robotic Aid for Rehabilitation of Locomotion-Impaired Subjects

NASA Technical Reports Server (NTRS)

Bejczy, Antal K.

2000-01-01

Manual assistance of therapists to help movement of legs of spinal cord injured (SCI) subjects during stepping on a treadmill for locomotion rehabilitation has severe economic and technical limitations. Scientists at the Department of Physiological Science at the University of California Los Angeles (UCLA) and roboticists at the Jet Propulsion Laboratory (JPL) initiated a joint effort to develop a robotic mechanism capable of performing controlled motions equivalent to the arm and hand motions of therapists assisting the stepping of locomotion impaired subjects on a treadmill, while the subjects' body weight is partially supported by an overhead harness. A first necessary technical step towards this development is to measure and understand the kinematics and dynamics of the therapists' arm and hand motions as they are reflected on the subjects' leg movement. This paper describes an initial measurement system developed for this purpose together with the related measurement results, and outlines the planned future technical work.

People’s Republic of China Scientific Abstracts, Number 170

DTIC Science & Technology

1977-06-30

Distribution Unlimited 20000324 188 U. S. JOINT PUBLICATIONS RESEARCH SERVICE REPRODUCED BY NATIONAL TECHNICAL INFORMATION SERVICE Reproduced From Best...Road, Wooster, Ohio, 44691. Correspondence pertaining to matters other than procurement may be addressed to Joint Publications Research Service...Performing Organization Name and Addreaa Joint Publications Research Service 1000 North Glebe Road Arlington, Virginia 22201 10. Project/Task/Work

LUT Wrap Up

DTIC Science & Technology

2011-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. LUT Wrap Up Curtis D. Mobley Sequoia Scientific, Inc...NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Sequoia Scientific, Inc,2700 Richards Road, Suite 107,Bellevue,WA...2010. EcoLight-S 1.0 Users’ Guide and Technical Documentation. Sequoia Scientific, Inc., 40 pages. Mobley, C. D., 2011. Fast light

Issues of Teacher Identity in a Restructuring VET [Vocational Education and Training] System. Working Paper.

ERIC Educational Resources Information Center

Chappell, Clive

Much recent debate has suggested Australia's technical and further education (TAFE) teachers not only need new knowledge and skills but need to perform their professional practices in new ways and in new contexts. What this debate has failed to recognize is that these change discourses are in effect constructing new professional identities for…

6 K Cryocooler Program

NASA Technical Reports Server (NTRS)

Gully, Willy; Herrero, Fred (Technical Monitor)

2001-01-01

The report summarizes experimental and theoretical work on an Oxford type Stirling Cycle mechanical precooler operating in the temperature range of 13-20 degrees Kelvin. It includes measurements of the thermal losses of particle regenerators made from lead, and rare earth and rare earth alloys in an operating three stage cryocooler. A 6 K hybrid cooler is designed using the technical information gathered on regenerator performance.

Factors Influencing Team Performance in a Continuous Quality Improvement Process in the Wisconsin Technical College System

ERIC Educational Resources Information Center

Pietz, Victoria Lynn

2014-01-01

Continuous Quality Improvement (CQI) programs are growing in popularity in higher education settings and a key component is the use of work groups, which require active employee involvement. The problem addressed in this research was the lack of employee engagement in the Quality Review Process (QRP), which is a statewide CQI model developed by…

Guidebook for Imputation of Missing Data. Technical Report No. 17.

ERIC Educational Resources Information Center

Wise, Lauress L.; McLaughlin, Donald H.

This guidebook is designed for data analysts who are working with computer data files that contain records with incomplete data. It indicates choices the analyst must make and the criteria for making those choices in regard to the following questions: (1) What resources are available for performing the imputation? (2) How big is the data file? (3)…

A Proximate Biological Survey of San Diego Bay, California

DTIC Science & Technology

1975-01-01

Ulothrlx sp. (green algae) Viva lattsslma (sea lettuce) Yucca schldlgera (Mohave yucca) Zostera marina (eelgrass) B. Marine Invertebrates Porifera...Technical Director ADMINISTRATIVE INFORMATION The work reported here was performed by the Marine Knvironmental Manage- ment Office of the Naval...from military sources, will be eliminated by 1980, (4) A number of marine organisms, including commercially and recreationally important species, are

Systems of Continuing Education: Priority to District Health Personnel. Report of a WHO Expert Committee. Technical Report Series 803.

ERIC Educational Resources Information Center

World Health Organization, Geneva (Switzerland).

Continuing education systems can improve the performance of health workers in countries around the world and support the functioning of district health systems. Continuing education guides health personnel toward the principles and methods of primary health care and improves their work with the community and family to attain an adequate level of…

A Study of Gaps in Network Knowledge Synthesis

DTIC Science & Technology

2016-10-14

Lincoln Laboratory MASSACHUSETTS INSTITUTE OF TECHNOLOGY LEXINGTON, MASSACHUSETTS Technical Report 1195 A Study of Gaps in Network...unlimited. This report is the result of studies performed at Lincoln Laboratory, a federally funded research and development center operated...specifically authorized by the U.S. Government may violate any copyrights that exist in this work. A Study of Gaps in Network Knowledge Synthesis

Publications of the Jet Propulsion Laboratory 1989

NASA Technical Reports Server (NTRS)

1990-01-01

This bibliography describes and indexes by primary author the externally distributed technical reporting, released during 1989, that resulted from scientific and engineering work performed, or managed, by JPL. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplishment; articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and articles published in the open literature.

Resource Letter MP-2: The Manhattan project and related nuclear research

NASA Astrophysics Data System (ADS)

Reed, B. Cameron

2011-02-01

This Resource Letter is a supplement to my earlier Resource Letter MP-1 and provides further sources on the Manhattan Project and related nuclear research. Books and journal articles are cited for the following topics: General works, technical works, biographical and autobiographical works, foreign wartime programs and allied intelligence, technical papers of historical interest, and postwar policy and technical developments. I also give a list of videos and websites dealing with the Manhattan Project, nuclear weapons, and nuclear issues.

Assessment of the Technical Maturity of Generation IV Concepts for Test or Demonstration Reactor Applications, Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans David

2015-10-01

The United States Department of Energy (DOE) commissioned a study the suitability of different advanced reactor concepts to support materials irradiations (i.e. a test reactor) or to demonstrate an advanced power plant/fuel cycle concept (demonstration reactor). As part of the study, an assessment of the technical maturity of the individual concepts was undertaken to see which, if any, can support near-term deployment. A Working Group composed of the authors of this document performed the maturity assessment using the Technical Readiness Levels as defined in DOE’s Technology Readiness Guide . One representative design was selected for assessment from of each ofmore » the six Generation-IV reactor types: gas-cooled fast reactor (GFR), lead-cooled fast reactor (LFR), molten salt reactor (MSR), supercritical water-cooled reactor (SCWR), sodium-cooled fast reactor (SFR), and very high temperature reactor (VHTR). Background information was obtained from previous detailed evaluations such as the Generation-IV Roadmap but other technical references were also used including consultations with concept proponents and subject matter experts. Outside of Generation IV activity in which the US is a party, non-U.S. experience or data sources were generally not factored into the evaluations as one cannot assume that this data is easily available or of sufficient quality to be used for licensing a US facility. The Working Group established the scope of the assessment (which systems and subsystems needed to be considered), adapted a specific technology readiness scale, and scored each system through discussions designed to achieve internal consistency across concepts. In general, the Working Group sought to determine which of the reactor options have sufficient maturity to serve either the test or demonstration reactor missions.« less

Experimental and Numerical Analysis of Structural Acousticcontrol Interior Noise Reduction

NASA Technical Reports Server (NTRS)

Mei, Chuh; Bevan, Jeffrey S.

1999-01-01

The research results contained in this technical report were performed under the NASA grant entitled "Experimental and Numerical Structural Acoustic Control for Interior Noise Reduction". The report is based essentially on partial progress of the Ph.D. dissertation prepared by Jeffrey S. Bevan under direct guidance of Dr. Chuh Mei. The document presents a finite element formulation and control of sound radiated from cylindrical panels embedded with piezoceramic actuators. The extended MIN6 shallow shell element is fully electrical-structural coupled. A piezoelectric modal actuator participation (PMAP) is defined which indicates the actuator performance to each of the offending modes. Genetic algorithm is also employed to validate the sensor and actuator locations determined by the PMAP criteria. The work was conducted at the Department of Aerospace Engineering, Old Dominion University. Mr. Travis L. Turner, Structural Acoustics Branch, NASA Langley Research Center is the technical monitor.

NASA Aerospace Flight Battery Program: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries; Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries; Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop). Volume 1, Part 1

NASA Technical Reports Server (NTRS)

Manzo, Michelle A.; Brewer, Jeffrey C.; Bugga, Ratnakumar V.; Darcy, Eric C.; Jeevarajan, Judith A.; McKissock, Barbara I.; Schmitz, Paul C.

2010-01-01

This NASA Aerospace Flight Battery Systems Working Group was chartered within the NASA Engineering and Safety Center (NESC). The Battery Working Group was tasked to complete tasks and to propose proactive work to address battery related, agency-wide issues on an annual basis. In its first year of operation, this proactive program addressed various aspects of the validation and verification of aerospace battery systems for NASA missions. Studies were performed, issues were discussed and in many cases, test programs were executed to generate recommendations and guidelines to reduce risk associated with various aspects of implementing battery technology in the aerospace industry. This document contains Part 1 - Volume I: Generic Safety, Handling and Qualification Guidelines for Lithium-Ion (Li-Ion) Batteries, Availability of Source Materials for Lithium-Ion (Li-Ion) Batteries, and Maintaining Technical Communications Related to Aerospace Batteries (NASA Aerospace Battery Workshop).

Appropriate working hours for surgical training according to Australasian trainees.

PubMed

O'Grady, Gregory; Harper, Simon; Loveday, Benjamin; Adams, Brandon; Civil, Ian D; Peters, Matthew

2012-04-01

The demands of surgical training, learning and service delivery compete with the need to minimize fatigue and maintain an acceptable lifestyle. The optimal balance of working hours is uncertain. This study aimed to define the appropriate hours to meet these requirements according to trainees. All Australian and New Zealand surgical trainees were surveyed. Roster structures, weekly working hours and weekly 'sleep loss hours' (<8 per night) because of 24-h calls were defined. These work practices were then correlated with sufficiency of training time, time for study, fatigue and its impacts, and work-life balance preferences. Multivariate and univariate analyses were performed. The response rate was 55.3% with responders representative of the total trainee body. Trainees who worked median 60 h/week (interquartile range: 55-65) considered their work hours to be appropriate for 'technical' and 'non-technical' training needs compared with 55 h/week (interquartile range: 50-60) regarded as appropriate for study/research needs. Working ≥65 h/week, or accruing ≥5.5 weekly 'sleep loss hours', was associated with increased fatigue, reduced ability to study, more frequent dozing while driving and impaired concentration at work. Trainees who considered they had an appropriate work-life balance worked median 55 h/week. Approximately, 60 h/week proved an appropriate balance of working hours for surgical training, although study and lifestyle demands are better met at around 55 h/week. Sleep loss is an important determinant of fatigue and its impacts, and work hours should not be considered in isolation. © 2012 The Authors. ANZ Journal of Surgery © 2012 Royal Australasian College of Surgeons.

[Probe into monitoring mechanism of Chinese materia medica resources].

PubMed

Zhang, Xiao-Bo; Li, Da-Ning; Guo, Lan-Ping; Lu, Jian-Wei; Sun, Li-Ying; Huang, Lu-Qi

2013-10-01

Focusing on the problems of Chinese materia medica resources,and combining with the national Chinese materia medica resources survey, the paper probes into monitoring mechanism of Chinese materia medica resources. The establishment of the monitoring mechanism needs one organization and management agencies to supervise and guide monitoring work, one network system to gather data information, a group of people to perform monitoring work, a system of technical methods to assure monitoring work scientific and practical, a series of achievements and products to figure out the methods for solving problems, a group of monitoring index system to accumulate basic data, and a plenty of funds to keep normal operation of monitoring work.

Gender difference in preference of specialty as a career choice among Japanese medical students.

PubMed

Kawamoto, Ryuichi; Ninomiya, Daisuke; Kasai, Yoshihisa; Kusunoki, Tomo; Ohtsuka, Nobuyuki; Kumagi, Teru; Abe, Masanori

2016-11-10

In Japan, the absolute deficiency of doctors and maldistribution of doctors by specialty is a significant problem in the Japanese health care system. The purpose of this study was to investigate the factors contributing to specialty preference in career choice among Japanese medical students. A total of 368 medical students completed the survey giving an 88.2 % response rate. The subjects comprised 141 women aged 21 ± 3 (range, 18-34) years and 227 men aged 22 ± 4 (range, 18-44) years. Binary Logistic regression analysis was performed using specialty preferences as the criterion variable and the factors in brackets as six motivational variables (e.g., Factor 1: educational experience; Factor 2: job security; Factor 3: advice from others; Factor 4: work-life balance; Factor 5: technical and research specialty; and Factor 6: personal reasons). Women significantly preferred pediatrics, obstetrics & gynecology, and psychology than the men. Men significantly preferred surgery and orthopedics than the women. For both genders, a high odds ratio (OR) of "technical & research specialty" and a low OR for "personal reasons" were associated with preference for surgery. "Technical & research specialty" was positively associated with preference for special internal medicine and negatively for pediatrics. "Work-life balance" was positively associated with preference for psychology and negatively for emergency medicine. Among the women only, "technical & research specialty" was negatively associated with preference for general medicine/family medicine and obstetrics & gynecology, and "job security" was positively associated for general medicine/family medicine and negatively for psychology. Among men only, "educational experience" and "personal reasons" were positively, and "job security" was negatively associated with preference for pediatrics. For both genders, "work-life balance" was positively associated with preference for controllable lifestyle specialties. We must acknowledge that Japanese medical students have dichotomized some motivations for their specialty preference based on gender. Systematic improvements in the working environment are necessary to solve these issues.

GRO: Black hole models for gamma ray bursts

NASA Technical Reports Server (NTRS)

Shaham, Jacob

1993-01-01

This grant deals with the production of gamma-ray bursts (GRB's) close to horizons of black holes (BH's), mainly via accretion of small chunks of matter onto extreme Kerr BH's. In the past year, we laid the ground work for actual calculations close to Kerr BH's. Because of technical reasons, actual work has only started very recently. Following the detailed list of research subprojects as per our original proposal, we have performed research in the following areas: spectrum calculation; burst dynamics; tidal capture and primordial cloud collapse; halo density profile; and capture of other objects.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scaglione, John M; Montgomery, Rose; Bevard, Bruce Balkcom

This test plan describes the experimental work to be implemented by the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) to characterize high burnup (HBU) spent nuclear fuel (SNF) in conjunction with the High Burnup Dry Storage Cask Research and Development Project and serves to coordinate and integrate the multi-year experimental program to collect and develop data regarding the continued storage and eventual transport of HBU (i.e., >45 GWd/MTU) SNF. The work scope involves the development, performance, technical integration, and oversight of measurements and collection of relevant data, guided by analyses and demonstration of need.

The production of the AGARD multilingual aeronautical dictionary using computer techniques

NASA Technical Reports Server (NTRS)

Wente, V. A.; Kirschbaum, J. C.; Kuney, J. H.

1981-01-01

The AGARD Multilingual Aeronautical Dictionary (MAD) contained 7,300 technical terms defined in English but also translated into nine other languages. The preparation work was performed by some 250 scientists and engineers who were members of AGARD and involved the translation skills of staff in many of the NATO nations. Nearly all the compilation and setting work for the book was done by computer and automatic photo-composition. The purpose of this publication is to record how the task was approached in terms of management planning.

The performance of H2O, R134a, SES36, ethanol, and HFE7100 two-phase closed thermosyphons for varying operating parameters and geometry

NASA Astrophysics Data System (ADS)

Andrzejczyk, Rafał; Muszyński, Tomasz

2017-09-01

In this study, the influences of different parameters at performance two-phase closed thermosiphon (TPCT) was presented. It has been confirmed that the working fluid, as well as operating parameters and fill ratio, are very important factors in the performance of TPCT. The article shows characteristics of gravitational tube geometries, as well as the technical characteristic of the most important system components, i.e., the evaporator/condenser. The experiment's plan and the results of it for the two-phase thermosiphon for both evaluated geometries with varying thermal and fluid flow parameters are presented. Experiments were performed for the most perspective working fluids, namely: water, R134a, SES36, ethanol and HFE7100. Obtained research proves the possibility to use TPCT for heat recovery from the industrial waste water.

Parameter optimization of measuring and control elements in the monitoring systems of complex technical objects

NASA Astrophysics Data System (ADS)

Nekrylov, Ivan; Korotaev, Valery; Blokhina, Anastasia; Kleshchenok, Maksim

2017-06-01

In the world is the widespread adoption of measuring equipment of new generation, which is characterized by small size, high automation level, a multi-channel, digital filtering, satellite synchronization, wireless communication, digital record in long-term memory with great resource, powered by long-lived sources, etc. However, modern equipment base of the Russian institutions and the level of development of technical facilities and measuring technologies lag far behind developed countries. For this reason, the vacated niches are actively developed by foreign companies. For example, more than 70% instrumentation performing works on the territory of Russia, equipped with imported equipment (products of Sweden and Germany companies); the amount of work performed with German equipment is more than 70% of the total volume of these works; more than 80% of industrial measurements are performed using HEXAGON equipment (Sweden). These trends show that the Russian sector of measuring technology gradually become import-dependent, which poses a threat to the economic security of the country and consistent with national priorities. The results of the research will allow to develop the theory of formation of control systems of the displacement with high accuracy and unattainable for the existing analogue ergonomic and weight characteristics combined with a comparable or lower cost. These advantages will allow you to be successful competition, and eventually to supplant the existing system, which had no fundamental changes in the last 20 years and, therefore, retained all the drawbacks: large size and weight, high power consumption, the dependence on magnetic fields

MedlinePlus Connect: Technical Information

MedlinePlus

... Service Technical Information Page MedlinePlus Connect Implementation Options Web Application How does it work? Responds to requests ... examples of MedlinePlus Connect Web Application response pages. Web Service How does it work? Responds to requests ...

Family medicine practice performance and knowledge management.

PubMed

Orzano, A John; McInerney, Claire R; Tallia, Alfred F; Scharf, Davida; Crabtree, Benjamin F

2008-01-01

Knowledge management (KM) is the process by which people in organizations find, share, and develop knowledge for action. KM affects performance by influencing work relationships to enhance learning and decision making. To identify how family medicine practices exhibit KM. A model and a template of KM concepts were derived from a comprehensive organizational literature review. Two higher and two lower performing family medicine practices were purposefully selected from existing comparative case studies based on prevention delivery rates and innovation. Interviews, fieldnotes of operations, and clinical encounters were coded independently using the template. Face-to-face discussions resolved coding differences. All practices had processes and tools for finding, sharing, and developing knowledge; however, KM overall was limited despite implementation of expensive technologies like an electronic medical record. Where present, KM processes and tools were used by individuals but not integrated throughout the organization. Loss of information was prominent, and finding knowledge was underdeveloped. The use of technical tools and developing knowledge by reconfiguration and measurement were particularly limited. Socially related tools, such as face-to-face-communication for sharing and developing knowledge, were more developed. As in other organizations, tool use was tailored for specific outcomes and leveraged by other organizational capacities. Differences in KM occur within family practices and between family practices and other organizations and may have implications for improving practice performance. Understanding interaction patterns of work relationships and KM may explain why costly technical or externally imposed "one size fits all" practice organizational interventions have had mixed results and limited sustainability.

IN SITU FIELD TESTING OF PROCESSES

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.S.Y. YANG

2004-11-08

The purpose of this scientific analysis report is to update and document the data and subsequent analyses from ambient field-testing activities performed in underground drifts and surface-based boreholes through unsaturated zone (UZ) tuff rock units. In situ testing, monitoring, and associated laboratory studies are conducted to directly assess and evaluate the waste emplacement environment and the natural barriers to radionuclide transport at Yucca Mountain. This scientific analysis report supports and provides data to UZ flow and transport model reports, which in turn contribute to the Total System Performance Assessment (TSPA) of Yucca Mountain, an important document for the license applicationmore » (LA). The objectives of ambient field-testing activities are described in Section 1.1. This report is the third revision (REV 03), which supercedes REV 02. The scientific analysis of data for inputs to model calibration and validation as documented in REV 02 were developed in accordance with the Technical Work Plan (TWP) ''Technical Work Plan for: Performance Assessment Unsaturated Zone'' (BSC 2004 [DIRS 167969]). This revision was developed in accordance with the ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654], Section 1.2.4) for better integrated, consistent, transparent, traceable, and more complete documentation in this scientific analysis report and associated UZ flow and transport model reports. No additional testing or analyses were performed as part of this revision. The list of relevant acceptance criteria is provided by ''Technical Work Plan for: Unsaturated Zone Flow Analysis and Model Report Integration'' (BSC 2004 [DIRS 169654]), Table 3-1. Additional deviations from the TWP regarding the features, events, and processes (FEPs) list are discussed in Section 1.3. Documentation in this report includes descriptions of how, and under what conditions, the tests were conducted. The descriptions and analyses provide data useful for refining and confirming the understanding of flow, drift seepage, and transport processes in the UZ. The UZ testing activities included measurement of permeability distribution, quantification of the seepage of water into the drifts, evaluation of fracture-matrix interaction, study of flow along faults, testing of flow and transport between drifts, characterization of hydrologic heterogeneity along drifts, estimation of drying effects on the rock surrounding the drifts due to ventilation, monitoring of moisture conditions in open and sealed drifts, and determination of the degree of minimum construction water migration below drift. These field tests were conducted in two underground drifts at Yucca Mountain, the Exploratory Studies Facility (ESF) drift, and the cross-drift for Enhanced Characterization of the Repository Block (ECRB), as described in Section 1.2. Samples collected in boreholes and underground drifts have been used for additional hydrochemical and isotopic analyses for additional understanding of the UZ setting. The UZ transport tests conducted at the nearby Busted Butte site (see Figure 1-4) are also described in this scientific analysis report.« less

Working hours associated with unintentional sleep at work among airline pilots

PubMed Central

Marqueze, Elaine Cristina; Nicola, Ana Carolina B; Diniz, Dag Hammarskjoeld M D; Fischer, Frida Marina

2017-01-01

ABSTRACT OBJECTIVE Tto identify factors associated with unintentional sleep at work of airline pilots. METHODS This is a cross-sectional epidemiological study conducted with 1,235 Brazilian airline pilots, who work national or international flights. Data collection has been performed online. We carried out a bivariate and multiple logistic regression analysis, having as dependent variable unintentional sleep at work. The independent variables were related to biodemographic data, characteristics of the work, lifestyle, and aspects of sleep. RESULTS The prevalence of unintentional sleep while flying the airplane was 57.8%. The factors associated with unintentional sleep at work were: flying for more than 65 hours a month, frequent technical delays, greater need for recovery after work, work ability below optimal, insufficient sleep, and excessive sleepiness. CONCLUSIONS The occurrence of unintentional sleep at work of airline pilots is associated with factors related to the organization of the work and health. PMID:28678902

Lincoln Advanced Science and Engineering Reinforcement (LASER) program

NASA Technical Reports Server (NTRS)

Williams, Willie E.

1989-01-01

Lincoln University, under the Lincoln Advanced Science and Engineering Reinforcement (LASER) Program, has identified and successfully recruited over 100 students for majors in technical fields. To date, over 70 percent of these students have completed or will complete technical degrees in engineering, physics, chemistry, and computer science. Of those completing the undergraduate degree, over 40 percent have gone on to graduate and professional schools. This success is attributable to well planned approaches to student recruitment, training, personal motivation, retention, and program staff. Very closely coupled to the above factors is a focus designed to achieve excellence in program services and student performance. Future contributions by the LASER Program to the pool of technical minority graduates will have a significant impact. This is already evident from the success of the students that began the first year of the program. With program plans to refine many of the already successful techniques, follow-on activities are expected to make even greater contributions to the availability of technically trained minorities. For example, undergraduate research exposure, broadened summer, and co-op work experiences will be enhanced.

Anticipatory ethics for a future Internet: analyzing values during the design of an Internet infrastructure.

PubMed

Shilton, Katie

2015-02-01

The technical details of Internet architecture affect social debates about privacy and autonomy, intellectual property, cybersecurity, and the basic performance and reliability of Internet services. This paper explores one method for practicing anticipatory ethics in order to understand how a new infrastructure for the Internet might impact these social debates. This paper systematically examines values expressed by an Internet architecture engineering team-the Named Data Networking project-based on data gathered from publications and internal documents. Networking engineers making technical choices also weigh non-technical values when working on Internet infrastructure. Analysis of the team's documents reveals both values invoked in response to technical constraints and possibilities, such as efficiency and dynamism, as well as values, including privacy, security and anonymity, which stem from a concern for personal liberties. More peripheral communitarian values espoused by the engineers include democratization and trust. The paper considers the contextual and social origins of these values, and then uses them as a method of practicing anticipatory ethics: considering the impact such priorities may have on a future Internet.

International Space Station ECLSS Technical Task Agreement Summary Report

NASA Technical Reports Server (NTRS)

Ray, C. D. (Compiler); Salyer, B. H. (Compiler)

1999-01-01

This Technical Memorandum provides a summary of current work accomplished under Technical Task Agreement (TTA) by the Marshall Space Flight Center (MSFC) regarding the International Space Station (ISS) Environmental Control and Life Support System (ECLSS). Current activities include ECLSS component design and development, computer model development, subsystem/integrated system testing, life testing, and general test support provided to the ISS program. Under ECLSS design, MSFC was responsible for the six major ECLSS functions, specifications and standard, component design and development, and was the architectural control agent for the ISS ECLSS. MSFC was responsible for ECLSS analytical model development. In-house subsystem and system level analysis and testing were conducted in support of the design process, including testing air revitalization, water reclamation and management hardware, and certain nonregenerative systems. The activities described herein were approved in task agreements between MSFC and NASA Headquarters Space Station Program Management Office and their prime contractor for the ISS, Boeing. These MSFC activities are in line to the designing, development, testing, and flight of ECLSS equipment planned by Boeing. MSFC's unique capabilities for performing integrated systems testing and analyses, and its ability to perform some tasks cheaper and faster to support ISS program needs, are the basis for the TTA activities.

Surgeons' and trainees' perceived self-efficacy in operating theatre non-technical skills.

PubMed

Pena, G; Altree, M; Field, J; Thomas, M J W; Hewett, P; Babidge, W; Maddern, G J

2015-05-01

An important factor that may influence an individual's performance is self-efficacy, a personal judgement of capability to perform a particular task successfully. This prospective study explored newly qualified surgeons' and surgical trainees' self-efficacy in non-technical skills compared with their non-technical skills performance in simulated scenarios. Participants undertook surgical scenarios challenging non-technical skills in two simulation sessions 6 weeks apart. Some participants attended a non-technical skills workshop between sessions. Participants completed pretraining and post-training surveys about their perceived self-efficacy in non-technical skills, which were analysed and compared with their performance in surgical scenarios in two simulation sessions. Change in performance between sessions was compared with any change in participants' perceived self-efficacy. There were 40 participants in all, 17 of whom attended the non-technical skills workshop. There was no significant difference in participants' self-efficacy regarding non-technical skills from the pretraining to the post-training survey. However, there was a tendency for participants with the highest reported self-efficacy to adjust their score downwards after training and for participants with the lowest self-efficacy to adjust their score upwards. Although there was significant improvement in non-technical skills performance from the first to second simulation sessions, a correlation between participants' self-efficacy and performance in scenarios in any of the comparisons was not found. The results suggest that new surgeons and surgical trainees have poor insight into their non-technical skills. Although it was not possible to correlate participants' self-belief in their abilities directly with their performance in a simulation, in general they became more critical in appraisal of their abilities as a result of the intervention. © 2015 BJS Society Ltd Published by John Wiley & Sons Ltd.

Workplace Skills in Practice. Case Studies of Technical Work.

ERIC Educational Resources Information Center

Stasz, Cathleen; And Others

A study was conducted to explore skills and work-related dispositions in technical work. It used a sociocultural approach to examine skills in seven target jobs in worksites representing diverse industries--health care, traffic management, transportation, and semiconductor manufacturing. It explored employers' strategies for obtaining the skills…

The impact of fatigue on the non-technical skills performance of critical care air ambulance clinicians.

PubMed

Myers, J A; Powell, D M C; Aldington, S; Sim, D; Psirides, A; Hathaway, K; Haney, M F

2017-11-01

The relationship between fatigue-related risk and impaired clinical performance is not entirely clear. Non-technical factors represent an important component of clinical performance and may be sensitive to the effects of fatigue. The hypothesis was that the sum score of overall non-technical performance is degraded by fatigue. Nineteen physicians undertook two different simulated air ambulance missions, once when rested, and once when fatigued (randomised crossover design). Trained assessors blinded to participants' fatigue status performed detailed structured assessments based on expected behaviours in four non-technical skills domains: teamwork, situational awareness, task management, and decision making. Participants also provided self-ratings of their performance. The primary endpoint was the sum score of overall non-technical performance. The main finding, the overall non-technical skills performance rating of the clinicians, was better in rested than fatigued states (mean difference with 95% CI, 2.8 [2.2-3.4]). The findings remained consistent across individual non-technical skills domains; also when controlling for an order effect and examining the impact of a number of possible covariates. There was no difference in self-ratings of clinical performance between rested and fatigued states. Non-technical performance of critical care air transfer clinicians is degraded when they are fatigued. Fatigued clinicians may fail to recognise the degree to which their performance is compromised. These findings represent risk to clinical care quality and patient safety in the dynamic and isolated environment of air ambulance transfer. © 2017 The Acta Anaesthesiologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

... consultant responsibilities. The technical consultant is responsible for the technical and scientific... of performance of instrument maintenance and function checks; (v) Assessment of test performance...

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

... consultant responsibilities. The technical consultant is responsible for the technical and scientific... of performance of instrument maintenance and function checks; (v) Assessment of test performance...

Cardiopulmonary performance testing using a robotics-assisted tilt table: feasibility assessment in able-bodied subjects.

PubMed

Saengsuwan, J; Laubacher, M; Nef, T; Hunt, K J

2014-01-01

Robotics-assisted tilt table technology was introduced for early rehabilitation of neurological patients. It provides cyclical stepping movement and physiological loading of the legs. The aim of the present study was to assess the feasibility of this type of device for peak cardiopulmonary performance testing using able-bodied subjects. A robotics-assisted tilt table was augmented with force sensors in the thigh cuffs and a work rate estimation algorithm. A custom visual feedback system was employed to guide the subjects' work rate and to provide real time feedback of actual work rate. Feasibility assessment focused on: (i) implementation (technical feasibility), and (ii) responsiveness (was there a measurable, high-level cardiopulmonary reaction?). For responsiveness testing, each subject carried out an incremental exercise test to the limit of functional capacity with a work rate increment of 5 W/min in female subjects and 8 W/min in males. 11 able-bodied subjects were included (9 male, 2 female; age 29.6 ± 7.1 years: mean ± SD). Resting oxygen uptake (O_{2}) was 4.6 ± 0.7 mL/min/kg and O_{2}peak was 32.4 ± 5.1 mL/min/kg; this mean O_{2}peak was 81.1% of the predicted peak value for cycle ergometry. Peak heart rate (HRpeak) was 177.5 ± 9.7 beats/min; all subjects reached at least 85% of their predicted HRpeak value. Respiratory exchange ratio (RER) at O_{2}peak was 1.02 ± 0.07. Peak work rate) was 61.3 ± 15.1 W. All subjects reported a Borg CR10 value for exertion and leg fatigue of 7 or more. The robotics-assisted tilt table is deemed feasible for peak cardiopulmonary performance testing: the approach was found to be technically implementable and substantial cardiopulmonary responses were observed. Further testing in neurologically-impaired subjects is warranted.

Principle Findings from Development of a Recirculated Exhaust Gas Intake Sensor (REGIS) Enabling Cost-Effective Fuel Efficiency Improvement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schnabel, Claus

Kick-off of the Bosch scope of work for the REGIS project started in October 2012. The primary work-packages included in the Bosch scope of work were the following: overall project management, development of the EGR sensor (design of sensor element, design of protection tube, and design of mounting orientation), development of EGR system control strategy, build-up of prototype sensors, evaluation of system performance with the new sensor and the new control strategy, long-term durability testing, and development of a 2nd generation sensor concept for continued technology development after the REGIS project. The University of Clemson was a partner with Boschmore » in the REGIS project. The Clemson scope of work for the REGIS project started in June 2013. The primary work-packages included in the Clemson scope of work were the following: development of EGR system control strategy, and evaluation of system performance with the new sensor and new control strategy. This project was split into phase I, phase II and phase III. Phase I work was completed by the end of June 2014 and included the following primary work packages: development of sensor technical requirements, assembly of engine testbench at Clemson, design concept for sensor housing, connector, and mounting orientation, build-up of EGR flow test benches at Bosch, and build-up of first sensor prototypes. Phase II work was completed by the end of June 2015 and included the following primary work pack ages: development of an optimizing function and demonstration of robustness of sensor, system control strategy implementation and initial validation, completion of engine in the loop testing of developed control algorithm, completion of sensor testing including characteristic line, synthetic gas test stand, and pressure dependency characterization, demonstration of benefits of control w/o sensing via simulation, development of 2nd generation sensor concept. Notable technical achievements from phase II were the following: publication of two new technical papers by Clemson detailing the control strategies used for the EGR system control. The two papers was published in the 2016 SAE World Congress in April 2016. The titles of each paper are, “Physics-Based Exhaust Pressure and Temperature Estimation for Low Pressure EGR Control in Turbocharged Gasoline Engines,” by K. Siokos, and “A Control Algorithm for Low Pressure – EGR Systems using a Smith Predictor with Intake Oxygen Sensor Feedback”, by R. Koli. All phase III work packages have been completed. The primary work packages in phase III were the following: completion of long-term sensor durability testing, final demonstration of benefits of EGR control w/o sensing, final decision of the second generation sensor development path.« less

Factors that influence the non-technical skills performance of scrub nurses: a prospective study.

PubMed

Kang, Evelyn; Massey, Debbie; Gillespie, Brigid M

2015-12-01

To identify and describe the factors that impact on the performance of scrub nurses' non-technical skills performance during the intra-operative phase of surgery. Non-technical skills have been identified as important precursors to errors in the operating room. However, few studies have investigated factors influencing non-technical skills of scrub nurses. Prospective observational study. Structured observations were performed on a sample of 182 surgical procedures across eight specialities by two trained observers from August 2012-April 2013 at two hospital sites. Participants were purposively selected scrub nurses. Bivariate correlations and a multiple linear regression model were used to identify associations among length of surgery, patients' acuity using the American Society of Anesthesiologists classification system, team familiarity, number of occasions scout nurses leave the operating room, change of scout nurse and the outcome, the non-technical skills performance of scrub nurses. Patient acuity and team familiarity were the strongest predictors of scrub nurses' non-technical skills performance at hospital site A. There were no correlations between the predictors and the performance of scrub nurses at hospital site B. A dedicated surgical team and patient acuity potentially influence the performance of scrub nurses' non-technical skills. Familiarity with team members foster advanced planning, thus minimizing distractions and interruptions that impact on scrub nurses' performance. Development of interventions aimed at improving non-technical skills has the potential to make a substantial difference and enhance patient care. © 2015 John Wiley & Sons Ltd.

Bridging Human Reliability Analysis and Psychology, Part 1: The Psychological Literature Review for the IDHEAS Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

April M. Whaley; Stacey M. L. Hendrickson; Ronald L. Boring

In response to Staff Requirements Memorandum (SRM) SRM-M061020, the U.S. Nuclear Regulatory Commission (NRC) is sponsoring work to update the technical basis underlying human reliability analysis (HRA) in an effort to improve the robustness of HRA. The ultimate goal of this work is to develop a hybrid of existing methods addressing limitations of current HRA models and in particular issues related to intra- and inter-method variabilities and results. This hybrid method is now known as the Integrated Decision-tree Human Event Analysis System (IDHEAS). Existing HRA methods have looked at elements of the psychological literature, but there has not previously beenmore » a systematic attempt to translate the complete span of cognition from perception to action into mechanisms that can inform HRA. Therefore, a first step of this effort was to perform a literature search of psychology, cognition, behavioral science, teamwork, and operating performance to incorporate current understanding of human performance in operating environments, thus affording an improved technical foundation for HRA. However, this literature review went one step further by mining the literature findings to establish causal relationships and explicit links between the different types of human failures, performance drivers and associated performance measures ultimately used for quantification. This is the first of two papers that detail the literature review (paper 1) and its product (paper 2). This paper describes the literature review and the high-level architecture used to organize the literature review, and the second paper (Whaley, Hendrickson, Boring, & Xing, these proceedings) describes the resultant cognitive framework.« less

Performance and technical commissioning of an ultra-stable cooling system for a mid-range cryogenic astrophysical instrument (CARMENES-NIR)

NASA Astrophysics Data System (ADS)

Becerril, S.; Mirabet, E.; Lizon, J. L.; Calvo, R.; Abril, M.; Cárdenas, C.; Ferro, I.; Morales, R.; Pérez, D.; Ramón, A.; Sánchez-Carrasco, M. A.; Quirrenbach, A.; Amado, P.; Ribas, I.; Reiners, A.; Caballero, J. A.; Seifert, W.; Herranz, J.

2017-12-01

CARMENES is the new high-resolution high-stability spectrograph built for the 3.5m telescope at the Calar Alto Observatory (CAHA, Almería, Spain) by a consortium formed by German and Spanish institutions. This instrument is composed of two separate spectrographs, VIS channel (550-1050 nm) and NIR channel (900-1700 nm). The Instituto de Astrofísica de Andalucía, IAA-CSIC was responsible for the NIR-channel spectrograph. This was installed at the telescope by the end of 2015, technical commissioning and final tuning of the instrument being extended up to fall 2016. In that sense, one of the most challenging systems in the instrument involves the cooling system of the NIR channel. It is a key system within the stability budget and was entirely under the control of the IAA-CSIC. That development has been possible thanks to a very fruitful collaboration with ESO (Jean-Louis Lizon). The present work describes the performance of the CARMENES-NIR cooling system, mainly focusing on the extremely high thermal stability -on the order of few cK-around the working temperature (138K), as well as the main events and upgrades achieved during commissioning. As a result of its performance, CARMENES-NIR is a cornerstone within the field of astrophysical instrumentation and, in particular, related to discovery of earth-like exoplanets.

Work Force Information and Career-Technical Education. In Brief: Fast Facts for Policy and Practice No. 10.

ERIC Educational Resources Information Center

Sommers, Dixie

To prepare young people and adults for labor market success, career-technical education (CTE) practitioners must know how to find and use work force information. Recent federal legislation, including the Workforce Investment Act of 1998, underscores the importance of work force education. The nationwide work force information system makes data on…

Gas-Grain Simulation Facility (GGSF). Volume 1: Stage 1 facility definition studies

NASA Technical Reports Server (NTRS)

Gat, Nahum

1993-01-01

The Gas-Grain Simulation Facility (GGSF) is a facility-type payload to be included in the Space Station Freedom (SSF). The GGSF is a multidisciplinary facility that will accommodate several classes of experiments, including exobiology, planetary science, atmospheric science, and astrophysics. The physical mechanisms envisioned to be investigated include crystal growth, aggregation, nucleation, coagulation, condensation, collisions, fractal growth, cycles of freezing and evaporation, scavenging, longevity of bacteria, and more. TRW performed a Phase A study that included analyses of the science and technical (S&T) requirements, the development of facility functional requirements, and a conceptual design of the facility. The work that was performed under Stage 1 of the Phase A study and the results to date are summarized. In this stage, facility definition studies were conducted in sufficient detail to establish the technical feasibility of the candidate strawman experiments. The studies identified technical difficulties, identified required facility subsystems, surveyed existing technology studies and established preliminary facility weight, volume, power consumption, data systems, interface definition, and crew time requirements. The results of this study served as the basis for Stage 2 of the Phase A study in which a conceptual design and a reference design were performed. The results also served as a basis for a related study for a Gas-Grain Simulation Experiment Module (GGSEM), which is an apparatus intended to perform a subset of the GGSF experiments on board a low-Earth-orbiting platform.

TSCA Work Plan Chemical Technical Supplement – Physicochemical Properties and Environmental Fate of the Brominated Phthalates Cluster (BPC) Chemicals

EPA Pesticide Factsheets

TSCA Work Plan Chemical Technical Supplement – Physicochemical Properties and Environmental Fate of the Brominated Phthalates Cluster (BPC) Chemicals -- Brominated Phthalates Cluster Flame Retardants.

Research Staff | Hydrogen and Fuel Cells | NREL

Science.gov Websites

laboratory's research areas contribute to this work. Research Areas and Technical Leads NREL's hydrogen and fuel cell research and development is organized into eight research areas. Technical leaders work

[Analysis of work-related fatigue characteristics and its influencing factors in scientific and technical personnel].

PubMed

Yang, Ting; Zhou, Dinglun; Song, Mingying; Lan, Yajia

2015-02-01

To investigate the current status and characteristics of work-related fatigue among scientific and technical personnel and its associated factors, and to provide a scientific basis for further interventions. A cross-sectional survey was conducted in the staff from a single scientific institution, using a self-administered questionnaire. Basic information of participants, Fatigue Scale-14, and Job Content Questionnaire were collected. The prevalence of work-related fatigue among the scientific and technical personnel was 54.6%; work-related fatigue was positively correlated with occupational stress (rs = 0.384, P < 0.05). Significant differences in the scores, proportions, and types of fatigue were found between different types of occupational stress. The associated factors of work-related fatigue included occupational stress profiles, social support, and educational status. A higher risk of work-related fatigue was found in the staff under high stress, compared with those under low stress (OR = 8.5, 95%CI = 3.9∼18.7). Social support served as a protective factor for work-related fatigue, while a higher level of education was correlated with more severe work-related fatigue. Work-related fatigue is common and serious among scientific and technical personnel, especially in those under high stress. Effective interventions according to occupational stress are of great importance to reduce work-related fatigue.

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

Is the technical performance of young soccer players influenced by hormonal status, sexual maturity, anthropometric profile, and physical performance?

PubMed

Moreira, Alexandre; Massa, Marcelo; Thiengo, Carlos R; Rodrigues Lopes, Rafael Alan; Lima, Marcelo R; Vaeyens, Roel; Barbosa, Wesley P; Aoki, Marcelo S

2017-12-01

The aim of this study was to examine the influence of hormonal status, anthropometric profile, sexual maturity level, and physical performance on the technical abilities of 40 young male soccer players during small-sided games (SSGs). Anthropometric profiling, saliva sampling, sexual maturity assessment (Tanner scale), and physical performance tests (Yo-Yo and vertical jumps) were conducted two weeks prior to the SSGs. Salivary testosterone was determined by the enzyme-linked immunosorbent assay method. Technical performance was determined by the frequency of actions during SSGs. Principal component analyses identified four technical actions of importance: total number of passes, effectiveness, goal attempts, and total tackles. A multivariate canonical correlation analysis was then employed to verify the prediction of a multiple dependent variables set (composed of four technical actions) from an independent set of variables, composed of testosterone concentration, stage of pubic hair and genitalia development, vertical jumps and Yo-Yo performance. A moderate-to-large relationship between the technical performance set and the independent set was observed. The canonical correlation was 0.75 with a canonical R 2 of 0.45. The highest structure coefficient in the technical performance set was observed for tackles (0.77), while testosterone presented the highest structure coefficient (0.75) for the variables of the independent set. The current data suggest that the selected independent set of variables might be useful in predicting SSG performance in young soccer players. Coaches should be aware that physical development plays a key role in technical performance to avoid decision-making mistakes during the selection of young players.

Publications of the Jet Propulsion Laboratory, 1978

NASA Technical Reports Server (NTRS)

1979-01-01

This bibliography cites 958 externally distributed technical papers released during calendar year 1978, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. The publications are indexed by author, subject, publication type and number. A descriptive entry appears under the name of each author of each publication; an abstract is included with the entry for the primary (first-listed) author.

Demonstration of a Robust Sensor System for Remote Condition Monitoring of Heat-Distribution System Manholes

DTIC Science & Technology

2016-02-01

15 Figure 16.Temperature sensor wires routed into galvanized steel piping...The technical monitors were Daniel J. Dunmire (OUSD(AT&L)), Bernie Rodriguez (IMPW-FM), and Valerie D. Hines (DAIM-ODF). The work was performed...or result in severe corrosion of steel HDS components, and must be corrected immediately to avoid costly collateral impacts on energy costs or HDS

Final Report - LAW Envelope C Glass Formulation Testing to Increase Waste Loading, VSL-05R5900-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Pegg, I. L.; Matlack, K. S.

2013-12-03

This report describes the results of testing specified by Test Plan VSL-05R5900-1 Rev.0. The work was performed in compliance with the quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The test results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.

Digital Video Interactive (DVI) Based Authoring Tools for Unit Level Training. Final Technical Report for Period 27 September 1991 - 27 May 1992.

ERIC Educational Resources Information Center

Hyltin, John P.; And Others

This report describes DVI (Digital Video Interactive) technology, current authoring languages and tools, and the reasons for developing new tools and applications. The work described was performed by Betac Corporation as part of a Phase II Small Business Innovation Research project. Section I provides background information on DVI. DVI technology…

Integrated United States Air Surveillance Governance Report

DTIC Science & Technology

2010-07-07

with examining whether and how IS departments and agencies might establish a governance mechanism to manage IS services in a manner that improves...Task Force recommends that an enduring interagency organization be established for collaborative management of IS services. It should be based on a...Committee (ISSAC)--would provide overall IS management and policy direction. IS technical work would be performed by a robust network of ISSAC

Training and Education of Financial Management Company Grade Officers

DTIC Science & Technology

2010-11-22

NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) COL Patricia O’Keefe Department of Command, Leadership , and...GRADE OFFICERS by Colonel Randy Stevens United States Army Colonel Patricia O‟ Keefe Project Adviser This SRP...of the mission have the proper technical and leadership skill requisites. Coupled with this is the expectation that leaders must be able to deal

Investigation of the Searching Efficiency and Cost of Creating a Remote Access Catalog for the New York State Library. Final Report.

ERIC Educational Resources Information Center

Buckland, Lawrence F.; Madden, Mary

From experimental work performed, and reported upon in this document, it is concluded that converting the New York State Library (NYSL) shelf list sample to machine readable form, and searching this shelf list using a remote access catalog are technically sound concepts though the capital costs of data conversion and system installation will be…

Toxic Hazards Research Unit. Annual Technical Report. 1978

DTIC Science & Technology

1978-08-01

determinations made for the following battery of clinical tests: HCT Bilirubin RBC Glucose WBC Triglycerides HGB Iron Alkaline Sedimentation Phosphatase Rate ...Count WBC Hematocrit HCT Hemoglobin HGB Sedimentation Rate SEDI Reticulocytes RETIC MCORP Mean Corpuscular Volume MCV Mean Corpuscular Hemoglobin MCH...Contract F33615-76-C-5005 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PPOGPAM ELEMENT, PROJECT , TASK University of California, Irvine APEA A WORK UNIT

FY15 Status of Immersion Phased Array Ultrasonic Probe Development and Performance Demonstration Results for Under Sodium Viewing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, Aaron A.; Larche, Michael R.; Mathews, Royce

2015-09-01

This Technical Letter Report (TLR) describes work conducted at the Pacific Northwest National Laboratory (PNNL) during FY 2015 on the under-sodium viewing (USV) PNNL project 58745, Work Package AT-15PN230102. This TLR satisfies PNNL’s M3AT-15PN2301027 milestone, and is focused on summarizing the design, development, and evaluation of a two-dimensional matrix phased-array probe referred to as serial number 3 (SN3). In addition, this TLR also provides the results from a performance demonstration of in-sodium target detection trials at 260°C using a one-dimensional 22-element linear array developed in FY14 and referred to as serial number 2 (SN2).

DE-FOA-EE0005502 Advanced Percussive Drilling Technology for Geothermal Exploration and Development Phase II Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann-Cherng; Raymond, David W.; Prasad, Somuri V.

Percussive hammers are a promising advance in drilling technology for geothermal since they rely upon rock reduction mechanisms that are well-suited for use in the hard, brittle rock characteristic of geothermal formations. The project research approach and work plan includes a critical path to development of a high-temperature (HT) percussive hammer using a two- phase approach. The work completed in Phase I of the project demonstrated the viability of percussive hammers and that solutions to technical challenges in design, material technology, and performance are likely to be resolved. Work completed in Phase II focused on testing the findings from Phasemore » I and evaluating performance of the materials and designs at high- operating temperatures. A high-operating temperature (HOT) drilling facility was designed, built, and used to test the performance of the DTH under extreme conditions. Results from the testing indicate that a high-temperature capable hammer can be developed and is a viable alternative for user in the driller's toolbox.« less

Advanced Percussive Drilling Technology for Geothermal Exploration and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Su, Jiann; Raymond, David; Prasad, Somuri

Percussive hammers are a promising advance in drilling technology for geothermal since they rely upon rock reduction mechanisms that are well-suited for use in the hard, brittle rock characteristic of geothermal formations. The project research approach and work plan includes a critical path to development of a high-temperature (HT) percussive hammer using a two phase approach. The work completed in Phase I of the project demonstrated the viability of percussive hammers and that solutions to technical challenges in design, material technology, and performance are likely to be resolved. Work completed in Phase II focused on testing the findings from Phasemore » I and evaluating performance of the materials and designs at high operating temperatures. A high-operating temperature (HOT) drilling facility was designed, built, and used to test the performance of the DTH under extreme conditions. Results from the testing indicate that a high-temperature capable hammer can be developed and is a viable alternative for use in the driller’s toolbox.« less

The use of subjective rating of exertion in Ergonomics.

PubMed

Capodaglio, P

2002-01-01

In Ergonomics, the use of psychophysical methods for subjectively evaluating work tasks and determining acceptable loads has become more common. Daily activities at the work site are studied not only with physiological methods but also with perceptual estimation and production methods. The psychophysical methods are of special interest in field studies of short-term work tasks for which valid physiological measurements are difficult to obtain. The perceived exertion, difficulty and fatigue that a person experiences in a certain work situation is an important sign of a real or objective load. Measurement of the physical load with physiological parameters is not sufficient since it does not take into consideration the particular difficulty of the performance or the capacity of the individual. It is often difficult from technical and biomechanical analyses to understand the seriousness of a difficulty that a person experiences. Physiological determinations give important information, but they may be insufficient due to the technical problems in obtaining relevant but simple measurements for short-term activities or activities involving special movement patterns. Perceptual estimations using Borg's scales give important information because the severity of a task's difficulty depends on the individual doing the work. Observation is the most simple and used means to assess job demands. Other evaluations integrating observation are the followings: indirect estimation of energy expenditure based on prediction equations or direct measurement of oxygen consumption; measurements of forces, angles and biomechanical parameters; measurements of physiological and neurophysiological parameters during tasks. It is recommended that determinations of performances of occupational activities assess rating of perceived exertion and integrate these measurements of intensity levels with those of activity's type, duration and frequency. A better estimate of the degree of physical activity of individuals thus can be obtained.

Extraforaminal Lumbar Interbody Fusion at the L5-S1 Level: Technical Considerations and Feasibility.

PubMed

Kurzbuch, Arthur Robert; Kaech, Denis; Baranowski, Pawel; Baranowska, Alicja; Recoules-Arche, Didier

2017-09-01

Background  Extraforaminal lumbar interbody fusion (ELIF) surgery is a muscle-sparing approach that allows the treatment of various degenerative spinal diseases. It is technical challenging to perform the ELIF approach at the L5-S1 level because the sacral ala obstructs the view of the intervertebral disk space. Methods  We reported earlier on the ELIF technique in which the intervertebral disk is targeted at an angle of 45 degrees relative to the midline. In this article we describe the technical process we developed to overcome the anatomic relation between the sacral ala and the intervertebral disk space L5-S1 that hinders the ELIF approach at this level. We then report in a retrospective analysis on the short-term clinical and radiologic outcome of 100 consecutive patients with degenerative L5-S1 pathologies who underwent ELIF surgery. Results  The L5-S1 ELIF approach could be realized in all patients. The short-term clinical outcome was evaluated 5 months after surgery: 92% of the patients were satisfied with their postoperative result; 8% had a poor result. Overall, 17% of the patients presented light radicular or low back pain not influencing their daily activity, and 82% of the patients working before surgery returned to work 3 to 7 months after surgery. The radiologic outcome was documented by computed tomography at 5 months after surgery and showed fusion in 99% of the patients. Lumbar magnetic resonance imaging performed in 5 patients at 6 months after surgery revealed the integrity of the paraspinal muscles. Conclusions  ELIF surgery at the L5-S1 level is technically feasible for various degenerative spinal diseases. Analysis of the clinical and radiologic data in a consecutive retrospective cohort of patients who underwent this surgical procedure showed a good short-term clinical outcome and fusion rate. Georg Thieme Verlag KG Stuttgart · New York.

48 CFR 216.402-2 - Technical performance incentives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Technical performance incentives. 216.402-2 Section 216.402-2 Federal Acquisition Regulations System DEFENSE ACQUISITION... Contracts 216.402-2 Technical performance incentives. See PGI 216.402-2 for guidance on establishing...

Integration of role-playing into technical skills training: a randomized controlled trial.

PubMed

Nikendei, C; Kraus, B; Schrauth, M; Weyrich, P; Zipfel, S; Herzog, W; Jünger, J

2007-11-01

Recently, efforts have been undertaken to enhance the face validity of technical skills training by introducing role-plays and standardised patients. Since little is known about the effects of role-playing with respect to the realism of a training situation and students' objective performance, we performed a randomized controlled trial. 36 medical students participated in videotaped small group skills-lab sessions on the topics of Doppler sonography and gastric tube insertion. One half of the students participated in role-plays and the other half practised without role-playing. Realism of the training situation was analysed by means of post-intervention self-selected student survey evaluations. Technical performance and patient-physician communication were assessed by independent ratings of the videotaped sessions. The physician's role was regarded to be significantly more realistic when performing role-plays. Assessment of videotaped sessions showed that practising technical skills by performing role-plays resulted in significantly better patient-physician communication whereas students' technical performance did not differ between groups. Introducing role-plays enhances the realism of technical skills training and leads to better patient-physician communication. Students do not seem to be overstrained by practising clinical technical skills using role-plays. We conclude that role-playing is a valuable method in practising technical skills.

School-to-Work Transition of Career and Technical Education Graduates

ERIC Educational Resources Information Center

Packard, Becky Wai-Ling; Leach, Miki; Ruiz, Yedalis; Nelson, Consuelo; DiCocco, Hannah

2012-01-01

This study analyzed the career development of career and technical education (CTE) high school graduates during their school-to-work transition, specifically their adaptability in the face of barriers. Forty graduates (22 men, 18 women) from working-class backgrounds participated in baseline surveys at graduation and phenomenological interviews 1…

Effects of Short-Interval and Long-Interval Swimming Protocols on Performance, Aerobic Adaptations, and Technical Parameters: A Training Study.

PubMed

Dalamitros, Athanasios A; Zafeiridis, Andreas S; Toubekis, Argyris G; Tsalis, George A; Pelarigo, Jailton G; Manou, Vasiliki; Kellis, Spiridon

2016-10-01

Dalamitros, AA, Zafeiridis, AS, Toubekis, AG, Tsalis, GA, Pelarigo, JG, Manou, V, and Kellis, S. Effects of short-interval and long-interval swimming protocols on performance, aerobic adaptations, and technical parameters: A training study. J Strength Cond Res 30(10): 2871-2879, 2016-This study compared 2-interval swimming training programs of different work interval durations, matched for total distance and exercise intensity, on swimming performance, aerobic adaptations, and technical parameters. Twenty-four former swimmers were equally divided to short-interval training group (INT50, 12-16 × 50 m with 15 seconds rest), long-interval training group (INT100, 6-8 × 100 m with 30 seconds rest), and a control group (CON). The 2 experimental groups followed the specified swimming training program for 8 weeks. Before and after training, swimming performance, technical parameters, and indices of aerobic adaptations were assessed. ΙΝΤ50 and ΙΝΤ100 improved swimming performance in 100 and 400-m tests and the maximal aerobic speed (p ≤ 0.05); the performance in the 50-m swim did not change. Posttraining V[Combining Dot Above]O2max values were higher compared with pretraining values in both training groups (p ≤ 0.05), whereas peak aerobic power output increased only in INT100 (p ≤ 0.05). The 1-minute heart rate and blood lactate recovery values decreased after training in both groups (p < 0.01). Stroke length increased in 100 and 400-m swimming tests after training in both groups (p ≤ 0.05); no changes were observed in stroke rate after training. Comparisons between groups on posttraining mean values, after adjusting for pretraining values, revealed no significant differences between ΙΝΤ50 and ΙΝΤ100 for all variables; however, all measures were improved vs. the respective values in the CON (p < 0.001-0.05). In conclusion, when matched for distance and exercise intensity, the short-interval (50 m) and long-interval (100 m) protocols confer analogous improvements in swimming performance, in stroke cycle parameters, and in indices of aerobic adaptations after 8 weeks of training.

Medical electromechatronics

NASA Astrophysics Data System (ADS)

Osipov, Y. M.; Syryamkin, V. I.; Osipov, O. Y.

2015-11-01

The first part of the article presentsdevices of rehabilitation electromechatronics.As a research work, the author's team has performed sketch and technical developments on this subject, which are protected by patents of the Russian Federation. The second part providesan overview of medical robotic surgery, which is ideal for imperfections removing.It also describes capabilities of the author's team in development of active driveline based "iron" hands.Scalpels never tremble in the iron hands, which are not afraid of the aftershocks and never get tired.They can perform operations during not less than 48 consecutive hours.

Final technical report for DE-SC00012633 AToM (Advanced Tokamak Modeling)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holland, Christopher; Orlov, Dmitri; Izzo, Valerie

This final report for the AToM project documents contributions from University of California, San Diego researchers over the period of 9/1/2014 – 8/31/2017. The primary focus of these efforts was on performing validation studies of core tokamak transport models using the OMFIT framework, including development of OMFIT workflow scripts. Additional work was performed to develop tools for use of the nonlinear magnetohydrodynamics code NIMROD in OMFIT, and its use in the study of runaway electron dynamics in tokamak disruptions.

Laser Atmospheric Wind Sounder (LAWS) phase 1. Volume 2

NASA Technical Reports Server (NTRS)

1990-01-01

This report summarizes and documents the results of the 12-month phase 1 work effort. The objective of phase 1 was to establish the conceptional definition of the laser atmospheric wind sounder (LAWS) sensor system, including accommodations analyses to ensure compatibility with the Space Station Freedom (SSF) and the Earth Observing System (EOS) Polar Orbiting Platform (POP). Various concepts were investigated with trade studies performed to select the configuration to be carried forward to the phase 2 Preliminary Design Definition. A summary of the LAWS system and subsystem trade studies that were performed leading to the baseline design configuration is presented in the appendix. The overall objective of the LAWS Project is to define, design, and implement an operational space based facility, LAWS, for accurate measurement of Earth wind profiles. Phase 1 addressed three major areas: (1) requirements definition; (2) instrument concepts and configurations; and (3) performance analysis. For the LAWS instrument concepts and configurations, the issues which press the technological state of the art are reliable detector lifetime and laser performance and lifetime. Lag angle compensation, pointing accuracy, satellite navigation, and telescope design are significant technical issues, but they are considered to be currently state of the art. The primary issues for performance analysis concern interaction with the atmosphere in terms of backscatter and attenuation, wind variance, and cloud blockage. The phase 1 tasks were formulated to address these significant technical issues and demonstrate the technical feasibility of the LAWS concept. Primary emphasis was placed on analysis/trade and identification of candidate concepts. Promising configurations were evaluated for performance, sensitivities, risks, and budgetary costs. Lockheed's baseline LAWS configuration is presented.

The impact of nontechnical skills on technical performance in surgery: a systematic review.

PubMed

Hull, Louise; Arora, Sonal; Aggarwal, Rajesh; Darzi, Ara; Vincent, Charles; Sevdalis, Nick

2012-02-01

Failures in nontechnical and teamwork skills frequently lie at the heart of harm and near-misses in the operating room (OR). The purpose of this systematic review was to assess the impact of nontechnical skills on technical performance in surgery. MEDLINE, EMBASE, PsycINFO databases were searched, and 2,041 articles were identified. After limits were applied, 341 articles were retrieved for evaluation. Of these, 28 articles were accepted for this review. Data were extracted from the articles regarding sample population, study design and setting, measures of nontechnical skills and technical performance, study findings, and limitations. Of the 28 articles that met inclusion criteria, 21 articles assessed the impact of surgeons' nontechnical skills on their technical performance. The evidence suggests that receiving feedback and effectively coping with stressful events in the OR has a beneficial impact on certain aspects of technical performance. Conversely, increased levels of fatigue are associated with detriments to surgical skill. One article assessed the impact of anesthesiologists' nontechnical skills on anesthetic technical performance, finding a strong positive correlation between the 2 skill sets. Finally, 6 articles assessed the impact of multiple nontechnical skills of the entire OR team on surgical performance. A strong relationship between teamwork failure and technical error was empirically demonstrated in these studies. Evidence suggests that certain nontechnical aspects of performance can enhance or, if lacking, contribute to deterioration of surgeons' technical performance. The precise extent of this effect remains to be elucidated. Copyright © 2012 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

DOE PAGES

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

2016-09-16

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques weremore » applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.« less

State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwantes, Jon M.; Marsden, Oliva; Pellegrini, Kristi L.

The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Moreover, exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques weremore » applied to ITWG exercises for the first time. We performed an objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided.« less

Identification of non-technical skills from the resilience engineering perspective: a case study of an electricity distributor.

PubMed

Wachs, Priscila; Righi, Angela Weber; Saurin, Tarcisio Abreu

2012-01-01

Training in non-technical skills (NTS) does not usually question the design of the work system, and thus focuses narrowly on workers as the unit of analysis. This study discusses how the identification of NTS, a major step for developing an NTS training program, might be re-interpreted from the perspective of resilience engineering (RE). This discussion is based on a case study of identifying NTS for electricians who perform emergency maintenance activities in an electricity distribution power line. The results of the case study point out that four data analysis procedures might operationalize the RE perspective: (a) identifying factors that make the work difficult and which could be integrated into NTS training scenarios; (b) identifying recommendations for re-designing the system, in order either to reduce or eliminate the need for NTS; (c) classifying the NTS into pragmatic categories, which are meaningful for workers; and (d) regarding the identification of NTS as an opportunity to give visibility to adaptations carried out by workers.

[Case histories and other stories in the multimedia era... but was there something else?...].

PubMed

Kohler, Hans-Peter

2010-12-01

The multimedia era is fascinating and limitless! The advances in the field of consumer and entertainment electronics are impressive. Our private as well as business life is very much accompanied and influenced by numerous technical gadgets. These advancements should have many positive implications on our clinical work. Do they? Using modern personal computers and clinic information systems (CIS) the access to patients' data, the prescription of drugs, or x-ray diagnostics on high-resolution laptop screens became as easy as pie. This affects the doctor-patient relationship but also the communication between physicians and nurses. Computers also affect our daily clinical work and therefore the treatment of our patients. Do our patients take benefit from these technical achievements? Does the use of clinic information systems positively influence diagnosis, treatment and finally patient outcome but also doctors' performances? What has really changed in the last couples of years? The present article tries to critically review these major changes in patient care.

Career-Technical Education--The Immediate Need for Work-Based Curriculum.

ERIC Educational Resources Information Center

Nee, John G.

1994-01-01

Career-technical education may be informal on-the-job training, organized workplace education, community college or technical institute programs, or apprenticeships, internships, and cooperative agreements. Another alternative is polytechnical education: providing technical and general studies for adults in existing school facilities after school…

Technical skills acquisition in surgery-bound senior medical students: an evaluation of student assertiveness.

PubMed

Talbott, Vanessa A; Marks, Joshua A; Bodzin, Adam S; Comeau, Jason A; Maxwell, Pinckney J; Isenberg, Gerald A; Martin, Niels D

2012-01-01

To prepare students pursuing surgical careers, we devised a senior subinternship curriculum supplement that focused on the acquisition of technical skills required of surgical residents. We hypothesized that more assertive students, those that accomplished more of the curriculum, would perform better on a technical skills Objective Structured Clinical Examination (OSCE). Senior medical students rotating on their first general surgery subinternship were administered a 6-station OSCE on the first day of their subinternship and again during the final week of the month-long rotation. A self-directed, 38-task "scavenger hunt" representing common intern level clinical skills, procedures, and patient care activities was provided to each student. The study was performed at Jefferson Medical College, a large, private medical school in Philadelphia, PA. Forty-nine senior students completed surgical subinternships between July 2009 and September 2010, and participated both in the pre-/post-OSCEs and the scavenger hunt. Students performed significantly better on the post-rotation OSCE than on the pre-rotation OSCE; 70.2% ± 8.1% vs. 60.4% ± 12.0%, p < 0.0001. Assertiveness scores from the "scavenger hunt" did not correlate with final OSCE scores (r = -0.328, p = 0.25), and were negatively correlated with the change between pre- and post-OSCE scores (r = -0.573, p < 0.04). Individual student assertiveness scores were determined by the number of tasks completed over the course of the rotation. As surgical education becomes more streamlined with evolving work hour restrictions, medical school education is playing an increasingly pivotal role in preparing students for internship. In our study, individual assertiveness in completing structured self-directed learning tasks did not directly predict the acquisition of proficiency in technical skills. We feel assertiveness is overshadowed by other factors that may carry more weight in terms of technical skills acquisition. Further studies are required to delineate these factors and ultimately enhance technical skills acquisition during medical school. Copyright © 2012 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

ESGE-ESGENA technical specification for process validation and routine testing of endoscope reprocessing in washer-disinfectors according to EN ISO 15883, parts 1, 4, and ISO/TS 15883-5.

PubMed

Beilenhoff, Ulrike; Biering, Holger; Blum, Reinhard; Brljak, Jadranka; Cimbro, Monica; Dumonceau, Jean-Marc; Hassan, Cesare; Jung, Michael; Neumann, Christiane; Pietsch, Michael; Pineau, Lionel; Ponchon, Thierry; Rejchrt, Stanislav; Rey, Jean-François; Schmidt, Verona; Tillett, Jayne; van Hooft, Jeanin

2017-12-01

1 Prerequisites. The clinical service provider should obtain confirmation from the endoscope washer-disinfector (EWD) manufacturer that all endoscopes intended to be used can be reprocessed in the EWD. 2 Installation qualification. This can be performed by different parties but national guidelines should define who has the responsibilities, taking into account legal requirements. 3 Operational qualification. This should include parametric tests to verify that the EWD is working according to its specifications. 4 Performance qualification. Testing of cleaning performance, microbiological testing of routinely used endoscopes, and the quality of the final rinse water should be considered in all local guidelines. The extent of these tests depends on local requirements. According to the results of type testing performed during EWD development, other parameters can be tested if local regulatory authorities accept this. Chemical residues on endoscope surfaces should be searched for, if acceptable test methods are available. 5 Routine inspections. National guidelines should consider both technical and performance criteria. Individual risk analyses performed in the validation and requalification processes are helpful for defining appropriate test frequencies for routine inspections. © Georg Thieme Verlag KG Stuttgart · New York.

48 CFR 1816.402-270 - NASA technical performance incentives.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false NASA technical performance incentives. 1816.402-270 Section 1816.402-270 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND....402-270 NASA technical performance incentives. (a) Pursuant to the guidelines in 1816.402, NASA has...

48 CFR 1816.402-270 - NASA technical performance incentives.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true NASA technical performance incentives. 1816.402-270 Section 1816.402-270 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND....402-270 NASA technical performance incentives. (a) Pursuant to the guidelines in 1816.402, NASA has...

48 CFR 1816.402-270 - NASA technical performance incentives.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false NASA technical performance incentives. 1816.402-270 Section 1816.402-270 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND....402-270 NASA technical performance incentives. (a) Pursuant to the guidelines in 1816.402, NASA has...

48 CFR 1816.402-270 - NASA technical performance incentives.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false NASA technical performance incentives. 1816.402-270 Section 1816.402-270 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND....402-270 NASA technical performance incentives. (a) Pursuant to the guidelines in 1816.402, NASA has...

48 CFR 1816.402-270 - NASA technical performance incentives.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false NASA technical performance incentives. 1816.402-270 Section 1816.402-270 Federal Acquisition Regulations System NATIONAL AERONAUTICS AND....402-270 NASA technical performance incentives. (a) Pursuant to the guidelines in 1816.402, NASA has...

AACE: an innovative partnership to enhance aircraft safety

NASA Astrophysics Data System (ADS)

Shurtleff, William W.

1999-01-01

The Federal Aviation Administration established the Airworthiness Assurance Center of Excellence (AACE) in September 1997, through a cooperative agreement grant with Iowa State University (ISU) and The Ohio State University (OSU). A technical support contract with the Center is now in place as well. Initially the Center has five areas of concentration supporting advances in airworthiness assurance. These are 1. Maintenance, inspection, and repair, 2. Propulsion and fuel systems safety, 3. Crashworthiness, 4. Advanced materials, and 5. Landing gear systems performance and safety. AACE has nine core members who provide guidance to the Program Management Office at ISU/OSU through a Board of Directors. The core members are: Arizona State University, Iowa State University, Northwestern University, The Ohio State University, University of Dayton, University of Maryland, University of California - Los Angeles, Wichita State University, and Sandia National Laboratories. The organization also includes numerous academic affiliates, industry partners, government laboratories and other organizations. The Center now has over thirty technical projects supporting technical advances in airworthiness assurance. All these projects have industry guidance and support. This paper discusses the current technical program of the center and the highlights of the five-year plan for technical work. Also included is a description of the factors that make the Center an innovative partnership to promote aircraft safety.

The eighty-hour workweek: surgical attendings' perspectives.

PubMed

Griner, Devan; Menon, Rema P; Kotwall, Cyrus A; Clancy, Thomas V; Hope, William W

2010-01-01

The year 2008 was a sentinel year in resident education; this was the first graduating general surgery class trained entirely under the 80-hour workweek. The purpose of this study was to evaluate attending surgeon perceptions of surgical resident attitudes and performance before and after duty-hour restrictions. An electronic survey was sent to all surgical teaching institutions in North Carolina. Both surgeon and hospital characteristics were documented. The survey consisted of questions designed to assess residents' attitudes/performance before and after the implementation of the work-hour restriction. In all, 77 surveys were returned (33% response rate). The survey demonstrated that 92% of educators who responded to the survey recognized a difference between the restricted residents (RRs) and the nonrestricted residents (NRRs), and most respondents (67%) attributed this to both the work-hour restrictions and the work ethic of current residents. Most attending surgeons reported no difference between the RRs and the NRRs in most categories; however, they identified a negative change in the areas of work ethic, technical skills development, decision-making/critical-thinking skills, and patient ownership among the RR group. Most surgeons expressed less trust (55%) with patient care and less confidence (68%) in residents' ability to operate independently in the RR group. Eighty-nine percent indicated that additional decreases in work hours would continue to hamper the mission of timely and comprehensive resident education. The perception of surgical educators was that RRs are clearly different from the NRRs and that the primary difference is in work ethic and duty-hour restrictions. Although similar in most attributes, RRs are perceived as having a lower baseline work ethic and a less developed technical skill set, decision-making ability, and sense of patient ownership. Subsequent study is needed to evaluate these concerns. Copyright 2010 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

A longitudinal study on risk factors for neck and shoulder pain among young adults in the transition from technical school to working life.

PubMed

Hanvold, Therese N; Wærsted, Morten; Mengshoel, Anne Marit; Bjertness, Espen; Twisk, Jos; Veiersted, Kaj Bo

2014-11-01

The study examined the course of neck and shoulder pain among a cohort of technical school students entering working life. We also aimed to identify work-related and individual risk factors for neck and shoulder pain during this transition period. The study was designed as a prospective cohort study following 420 technical school students (167 student hairdressers, 118 student electricians, and 135 media/design students) from school, through their apprenticeship and into working life. Every 4 (th)month over a 6.5 year period (2002-2009), the participant`s neck and shoulder pain for the preceding four weeks was assessed. Mechanical and psychosocial workplace factors as well as individual factors were evaluated at baseline and/or during the follow-up period. Data were analyzed by generalized estimating equations (GEE). We found a significant increase in neck and shoulder pain over time in the transition from technical school to working life. High mechanical workload was associated with neck and shoulder pain among women, while a high level of shoulder muscle endurance capacity was associated with lower rates of neck and shoulder pain among men. Perceived muscle tension and ethnicity were the most consistent predictors for neck and shoulder pain, found among both women and men. Increased neck and shoulder pain was found in the transition from technical school to working life, and both work-related and individual factors were associated with pain development.

The Application of Computers to Library Technical Processing

ERIC Educational Resources Information Center

Veaner, Allen B.

1970-01-01

Describes computer applications to acquisitions and technical processing and reports in detail on Stanford's development work in automated technical processing. Author is Assistant Director for Bibliographic Operation, Stanford University Libraries. (JB)

Developing non-technical ward-round skills.

PubMed

Harvey, Rachel; Mellanby, Edward; Dearden, Effie; Medjoub, Karima; Edgar, Simon

2015-10-01

Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform. There is evidence that newly qualified doctors are not adequately prepared by their undergraduate experiences for this task. The aim of this study was to analyse the challenges pertaining to non-technical skills that students would face during ward rounds, and to create a model that facilitates the transition from medical student to doctor. A total of 217 final-year medical students completed a simulated ward round. Free-text responses were analysed using template analysis applying an a priori template developed from the literature by the research team. This drew on the generic categories of non-technical skills suggested by Flin et al. Ninety-seven per cent of students agreed or strongly agreed that the simulated ward round improved their insight into the challenges of ward rounds and their perceived ability to work efficiently as an active member of the ward round. The responding students (206) submitted written feedback describing the learning that they planned to use: 800 learning points were recorded, and all could be categorised into one of seven non-technical skills. Conducting clinical 'rounds' is one of the most onerous and important duties that every junior doctor is expected to perform We believe that improved task efficiency and insight into the challenges of the ward round gained by medical students will lead to an enhancement in performance during clinical rounds, and will have a positive impact on patient safety. We would suggest that undergraduate medical schools consider this model in the preparation for the clinical practice element of the curriculum. © 2015 John Wiley & Sons Ltd.

Evolution of Toxoplasma-PCR methods and practices: a French national survey and proposal for technical guidelines.

PubMed

Roux, Guillaume; Varlet-Marie, Emmanuelle; Bastien, Patrick; Sterkers, Yvon

2018-06-08

The molecular diagnosis of toxoplasmosis lacks standardisation due to the use of numerous methods with variable performance. This diversity of methods also impairs robust performance comparisons between laboratories. The harmonisation of practices by diffusion of technical guidelines is a useful way to improve these performances. The knowledge of methods and practices used for this molecular diagnosis is an essential step to provide guidelines for Toxoplasma-PCR. In the present study, we aimed (i) to describe the methods and practices of Toxoplasma-PCR used by clinical microbiology laboratories in France and (ii) to propose technical guidelines to improve molecular diagnosis of toxoplasmosis. To do so, a yearly self-administered questionnaire-based survey was undertaken in proficient French laboratories from 2008 to 2015, and guidelines were proposed based on the results of those as well as previously published work. This period saw the progressive abandonment of conventional PCR methods, of Toxoplasma-PCR targeting the B1 gene and of the use of two concomitant molecular methods for this diagnosis. The diversity of practices persisted during the study, in spite of the increasing use of commercial kits such as PCR kits, DNA extraction controls and PCR inhibition controls. We also observed a tendency towards the automation of DNA extraction. The evolution of practices did not always go together with an improvement in those, as reported notably by the declining use of Uracil-DNA Glycosylase to avoid carry-over contamination. We here propose technical recommendations which correspond to items explored during the survey, with respect to DNA extraction, Toxoplasma-PCR and good PCR practices. Copyright © 2018 Australian Society for Parasitology. Published by Elsevier Ltd. All rights reserved.

A combined teamwork training and work standardisation intervention in operating theatres: controlled interrupted time series study.

PubMed

Morgan, Lauren; Pickering, Sharon P; Hadi, Mohammed; Robertson, Eleanor; New, Steve; Griffin, Damian; Collins, Gary; Rivero-Arias, Oliver; Catchpole, Ken; McCulloch, Peter

2015-02-01

Teamwork training and system standardisation have both been proposed to reduce error and harm in surgery. Since the approaches differ markedly, there is potential for synergy between them. Controlled interrupted time series with a 3 month intervention and observation phases before and after. Operating theatres conducting elective orthopaedic surgery in a single hospital system (UK Hospital Trust). Teamwork training based on crew resource management plus training and follow-up support in developing standardised operating procedures. Focus of subsequent standardisation efforts decided by theatre staff. Paired observers watched whole procedures together. We assessed non-technical skills using NOTECHS II, technical performance using glitch rate and compliance with WHO checklist using a simple quality tool. We measured complication and readmission rates and hospital stay using hospital administrative records. Before/after change was compared in the active and control groups using two-way ANOVA and regression models. 1121 patients were operated on before and 1100 after intervention. 44 operations were observed before and 50 afterwards. Non-technical skills (p=0.002) and WHO compliance (p<0.001) improved significantly after the intervention in the active versus the control group. Glitch count improved in both groups and there was no significant effect on clinical outcomes. Combined training in teamwork and system improvement causes marked improvements in team behaviour and WHO performance, but not technical performance or outcome. These findings are consistent with the synergistic hypothesis, but larger controlled studies with a strong implementation strategy are required to test potential outcome effects. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

[White House Conference on Aging, 1981. Employment. Report and Executive Summary of the Technical Committee.

ERIC Educational Resources Information Center

Sykes, James T.; And Others

This Technical Committee Report on Employment begins with a discussion of trends in work and retirement, examines attitudes toward work and retirement, and describes the economic and social consequences of work. An analysis of the present situation focuses on: (1) employment barriers and opportunities; (2) cost of employment; (3) productivity and…

Work-Based Learning Opportunities for High School Students

ERIC Educational Resources Information Center

Alfeld, Corinne; Charner, Ivan; Johnson, Lisa; Watts, Eric

2013-01-01

This report describes the Year 5 work of the National Research Center for Career and Technical Education's (NRCCTE) Technical Assistance (TA) Academy. In 2011-2012, the TA plan carried out by FHI 360 on behalf of the NRCCTE focused on developing a conceptual base for work-based learning (WBL), a strategy that helps students apply academic and…

Washtenaw Technical Middle College--High School for the High Tech.

ERIC Educational Resources Information Center

Vandenberg, Victoria

1996-01-01

An alternative high school, called a technical middle college, focuses on preparing students for technical careers; it is articulated with Washtenaw Community College. The curriculum integrates applied academics, especially math and science, with work-based learning, giving students technical knowledge and workplace experience. (Author/JOW)

Process research of non-CZ silicon material

NASA Technical Reports Server (NTRS)

1983-01-01

High risk, high payoff research areas associated with the Westinghouse process for producing photovoltaic modules using non- CZ sheet material were investigated. All work was performed using dendritic web silicon. The following tasks are discussed and associated technical results are given: (1) determining the technical feasibility of forming front and back junctions in non-CT silicon using dopant techniques; (2) determining the feasibility of forming a liquid applied diffusion mask to replace the more costly chemical vapor deposited SiO2 diffusion mask; (3) determining the feasibility of applying liquid anti-reflective solutions using meniscus coating equipment; (4) studying the production of uniform, high efficiency solar cells using ion implanation junction formation techniques; and (5) quantifying cost improvements associated with process improvements.

The levels of edit, second edition

NASA Technical Reports Server (NTRS)

Vanburen, R.; Buehler, M. F.

1980-01-01

The editorial process is analyzed, and five levels of edit are identified. These levels represent cumulative combinations of nine types of edit: Coordination, Policy, Integrity, Screening, Copy Clarification, Format, Mechanical Style, Language, and Substantive. The levels and types of edit, although developed for specific use with external reports at the Jet Propulsion Laboratory, cover the general range of technical editing, especially as it applies to an in-house technical publications organization. Each type of edit is set forth in terms of groups of actions to be performed by editor. The edit-level concept has enhanced understanding and communication among editors, authors, and publications managers concerning the specific editorial work to be done on each manuscript. It has also proved useful as a management tool for estimating and monitoring cost.

Kirtland Operations progress report, April--June 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from April to June 1991.« less

Kirtland Operations progress report, January--March 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these porgrams from January to March 1991.« less

Kirtland Operations progress report, October--December 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Kirtland Operations (KO) is an integral part of EG G Energy Measurements, Inc., whose primary mission is to support the US Department of Energy's (DOE's) programs in weapons development and testing and in nuclear safeguards and security. KO performs much of its work in close coordination with and often at the technical direction of Sandia National Laboratories. In addition to aiding Sandia's weapons programs, KO provides a wide spectrum of technical support to other Sandia activities, particularly their safeguards, security, and treaty verification programs. Support is also provided to other elements of the Department of Energy community and to othermore » federal agencies, primarily in weapons testing and safeguards. This report documents our support to these programs from October to December 1991.« less

A recent U.S. patent process for a musical instrument

NASA Astrophysics Data System (ADS)

Baecker, James I.

2005-09-01

The ins and outs of going from a novel musical instrument concept to issuance of a U.S. patent. The technical work performed included the development of a musical instrument based on space-frame body construction and a definition of the instrument body's resonance characteristics. The result required a description of the invention and communication with the patent attorney and conveying a correct perception of the invention to the U.S. Patent Office. This presentation describes several technical, practical, legal, and commercial issues encountered during the patent process by the inventors and their business entity. On 7 September 2004, U.S. Patent No. 6,787,688 for a musical instrument was issued and assigned by the inventors to Harmos Music, Ltd.

Resource Letter MP-3: The Manhattan Project and Related Nuclear Research

NASA Astrophysics Data System (ADS)

Reed, B. Cameron

2016-10-01

This Resource Letter is a supplement to the earlier Resource Letters MP-1 and MP-2, and provides further sources on the Manhattan Project and related research. Books, review papers, journal articles, videos, and websites are cited for the following topics: general works, technical works, biographical and autobiographical works, foreign wartime nuclear programs and related allied intelligence, the use of the bombs against Hiroshima and Nagasaki, technical papers of historical interest, postwar policy and technical developments, and educational materials. Together, these three Resource Letters describe nearly 400 sources of information on the Manhattan Project.

Installation of Groundwater Monitoring Wells TAV-MW15 and TAV-MW16.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lum, Clinton C. L.

This report documents the installation of two groundwater monitoring wells at the Technical Area V Groundwater (TAVG) Area of Concern at Sandia National Laboratories, New Mexico (SNL/NM). SNL/NM is managed and operated by National Technology and Engineering Solutions of Sandia, LLC., a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA- 0003525. Well installation activities were conducted in accordance with the New Mexico Environment Department (NMED) Hazardous Waste Bureau (HWB)-approved work plan Revised Treatability Study Work Plan for In-Situ Bioremediation at the Technical Area-V Groundwater Area of Concern (Workmore » Plan) (SNL/NM March 2016). The Work Plan was approved by NMED HWB prior to the start of field work (NMED May 2016). Project activities were performed from November 2016 through January 2017 by SNL/NM Environmental Restoration (ER) Operations personnel, and the SNL/NM drilling contractor Cascade Drilling LP. Drilling activities began with borehole drilling and sampling on November 30, 2016. Well construction and development fieldwork was completed on January 31, 2017. Land surveys to establish the location coordinates and elevations of the two wells were completed on March 23, 2017, and transmitted to SNL/NM personnel on April 17, 2017.« less

Robotic Mitral Valve Repair: The Learning Curve.

PubMed

Goodman, Avi; Koprivanac, Marijan; Kelava, Marta; Mick, Stephanie L; Gillinov, A Marc; Rajeswaran, Jeevanantham; Brzezinski, Anna; Blackstone, Eugene H; Mihaljevic, Tomislav

Adoption of robotic mitral valve surgery has been slow, likely in part because of its perceived technical complexity and a poorly understood learning curve. We sought to correlate changes in technical performance and outcome with surgeon experience in the "learning curve" part of our series. From 2006 to 2011, two surgeons undertook robotically assisted mitral valve repair in 458 patients (intent-to-treat); 404 procedures were completed entirely robotically (as-treated). Learning curves were constructed by modeling surgical sequence number semiparametrically with flexible penalized spline smoothing best-fit curves. Operative efficiency, reflecting technical performance, improved for (1) operating room time for case 1 to cases 200 (early experience) and 400 (later experience), from 414 to 364 to 321 minutes (12% and 22% decrease, respectively), (2) cardiopulmonary bypass time, from 148 to 102 to 91 minutes (31% and 39% decrease), and (3) myocardial ischemic time, from 119 to 75 to 68 minutes (37% and 43% decrease). Composite postoperative complications, reflecting safety, decreased from 17% to 6% to 2% (63% and 85% decrease). Intensive care unit stay decreased from 32 to 28 to 24 hours (13% and 25% decrease). Postoperative stay fell from 5.2 to 4.5 to 3.8 days (13% and 27% decrease). There were no in-hospital deaths. Predischarge mitral regurgitation of less than 2+, reflecting effectiveness, was achieved in 395 (97.8%), without correlation to experience; return-to-work times did not change substantially with experience. Technical efficiency of robotic mitral valve repair improves with experience and permits its safe and effective conduct.

Validity evidence of non-technical skills assessment instruments in simulated anaesthesia crisis management.

PubMed

Jirativanont, T; Raksamani, K; Aroonpruksakul, N; Apidechakul, P; Suraseranivongse, S

2017-07-01

We sought to evaluate the validity of two non-technical skills evaluation instruments, the Anaesthetists' Non-Technical Skills (ANTS) behavioural marker system and the Ottawa Global Rating Scale (GRS), to apply them to anaesthesia training. The content validity, response process, internal structure, relations with other variables and consequences were described for validity evidence. Simulated crisis management sessions were initiated during which two trained raters evaluated the performance of postgraduate first-, second- and third-year (PGY-1, PGY-2 and PGY-3) anaesthesia residents. The study included 70 participants, composed of 24 PGY-1, 24 PGY-2 and 22 PGY-3 residents. Both instruments differentiated the non-technical skills of PGY-1 from PGY-3 residents ( P <0.05). Inter-rater agreement was measured using the intraclass correlation coefficient (ICC). For the ANTS instrument, the intraclass correlation coefficients for task management, team-working, situation awareness and decision-making were 0.79, 0.34, 0.81 and 0.70, respectively. For the Ottawa GRS, the intraclass correlation coefficients for overall performance, leadership, problem-solving, situation awareness, resource utilisation and communication skills were 0.86, 0.83, 0.84, 0.87, 0.80 and 0.86, respectively. The Cronbach's alpha for internal consistency of the ANTS instrument was 0.93, and was 0.96 for the Ottawa GRS. There was a high correlation between the ANTS and Ottawa GRS. The raters reported the ease of use of the Ottawa GRS compared to the ANTS. We found sufficient evidence of validity in the ANTS instrument and the Ottawa GRS for the evaluation of non-technical skills in a simulated anaesthesia setting, but the Ottawa GRS was more practical and had higher reliability.

A quasi-Delphi study on technological barriers to the uptake of hydrogen as a fuel for transport applications-Production, storage and fuel cell drivetrain considerations

NASA Astrophysics Data System (ADS)

Hart, David; Anghel, Alexandra T.; Huijsmans, Joep; Vuille, François

The introduction of hydrogen in transport, particularly using fuel cell vehicles, faces a number of technical and non-technical hurdles. However, their relative importance is unclear, as are the levels of concern accorded them within the expert community conducting research and development within this area. To understand what issues are considered by experts working in the field to have significant potential to slow down or prevent the introduction of hydrogen technology in transport, a study was undertaken, primarily during 2007. Three key technology areas within hydrogen transport were selected - hydrogen storage, fuel cell drivetrains, and small-scale hydrogen production - and interviews with selected experts conducted. Forty-nine experts from 34 organisations within the fuel cell, automotive, industrial gas and other related industries participated, in addition to some key academic and government figures. The survey was conducted in China, Japan, North America and Europe, and analysed using conventional mathematical techniques to provide weighted and averaged rankings of issues viewed as important by the experts. It became clear both from the interviews and the subsequent analysis that while a primary concern in China was fundamental technical performance, in the other regions cost and policy were rated more highly. Although a few individual experts identified possible technical showstoppers, the overall message was that pre-commercial hydrogen fuel cell vehicles could realistically be on the road in tens of thousands within 5 years, and that full commercialisation could take place within 10-15 years, without the need for radical technical breakthroughs. Perhaps surprisingly, the performance of hydrogen storage technologies was not viewed as a showstopper, though cost was seen as a significant challenge. Overall, however, coherent policy development was more frequently identified as a major issue to address.

USSR and Eastern Europe Scientific Abstracts, Electronics and Electrical Engineering, Number 24.

DTIC Science & Technology

1976-11-12

GERMANY DUMMER, Joachim, graduate mathematician, and KLEIN, Richard, graduate engineer, Radio Works Combine State Enterprise, Erfurt DIGITAL FRONT PANEL ...operation, performance, and applications of a digital front panel display instrument was described and illustrated with circuit diagrams, block diagrams...technics, various digital and alphabetic panels , holography, and possibly the screens of cathode-ray tubes. One of the chief merits of "ftiros" is the

Summary Report: Audits of Ballast Water Treatment Systems

DTIC Science & Technology

2004-08-01

U.S. Coast Guard Research and Development Center 1082 Shennecossett Road, Groton, CT 06340-6048 Report No. CG-D-03-04 SUMMARY REPORT: AUDITS OF...Research & Development Center 1082 Shennecossett Road Groton, CT 06340-6048 iii Technical Report Documentation Page 1. Report No. CG-D-03-04 2...Performing Organization Name and Address U.S. Coast Guard Research and Development Center 1082 Shennecossett Road Groton, CT 06340-6048 10. Work

Final Report - LAW Envelope A and B Glass Formulations Testing in Increase Waste Loading. VSL-06R6900-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kruger, Albert A.; Joseph, I.; Muller, I. S.

This report describes the results of testing specified by the Test Plan VSL-06R6900-1 Rev 0. The work was performed in compliance with quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The test results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.

'Advancement of KHPS to DOE TRL 7/8' Project - Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adonizio, Mary Ann; Corren, Dean; Smith, Ron

Final Report describing activities performed under the 'Advancement of the KHPS to DOE TRL 7/8' project, including the development of critical component test protocols, testing and analysis of the Gen5 KHPS main shaft seal, and continuing compliance work on approved operational environmental monitoring plans in anticipation of KHPS turbine installation at Verdant Power's Roosevelt Island Tidal Energy (RITE) Project site in New York, NY.

From Relational Interfaces to Assume-Guarantee Contracts

DTIC Science & Technology

2014-03-18

Electrical Engineering and Computer Sciences University of California at Berkeley Technical Report No. UCB/EECS-2014-21 http://www.eecs.berkeley.edu/Pubs...5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) University of California at Berkeley, Electrical Engineering...design,” in EMSOFT’01. Springer, LNCS 2211, 2001. [2] A. Sangiovanni-Vincentelli et al., “Taming Dr. Frankenstein : Contract-Based Design for Cyber

Publications of the Jet Propulsion Laboratory, 1988

NASA Technical Reports Server (NTRS)

1989-01-01

This bibliography describes and indexes by primary author the externally distributed technical reporting, released during calendar year 1988, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplishment; articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and articles published in the open literature.

Tradeoffs Between Synchronization, Communication, and Work in Parallel Linear Algebra Computations

DTIC Science & Technology

2014-01-25

Demmel Electrical Engineering and Computer Sciences University of California at Berkeley Technical Report No. UCB/EECS-2014- 8 http...www.eecs.berkeley.edu/Pubs/TechRpts/2014/EECS-2014- 8 .html January 25, 2014 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...University of California at Berkeley,Electrical Engineering and Computer Sciences,Berkeley,CA,94720 8 . PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING

High Power Magnetohydrodynamic System

DTIC Science & Technology

1978-07-01

AFAPL/POD as the Program Manager. Dr. Daniel W. Swallom and Dr. Otto K. Sonju of Maxwell Laboratories, Inc. were responsible for the technical work. The...fabricated and tested. Figure 1 shows this hardware installed at the Santa Susana Field Laboratory (SSFL) for develop- ment testing. The cooled wall...development test program was conducted at Santa Susana Field Laboratory (SSFL) and a performance test program is to be conducted at AEDC. AEDC is to

Publications of the Jet Propulsion Laboratory, 1985

NASA Technical Reports Server (NTRS)

1986-01-01

This bibliography describes and indexes by primary author the externally distributed technical reporting, released during calender year 1985, that resulted from scientific and engineering work performed, or managed, by the Jet Propulsion Laboratory. Three classes of publications are included: JPL publications in which the information is complete for a specific accomplisment; Articles from the quarterly Telecommunications and Data Acquisition (TDA) Progress Report; and article published in the open literature.

2014 Enhanced LAW Glass Property-Composition Models, Phase 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muller, Isabelle; Pegg, Ian L.; Joseph, Innocent

2015-10-28

This report describes the results of testing specified by the Enhanced LAW Glass Property-Composition Models, VSL-13T3050-1, Rev. 0 Test Plan. The work was performed in compliance with the quality assurance requirements specified in the Test Plan. Results required by the Test Plan are reported. The te4st results and this report have been reviewed for correctness, technical adequacy, completeness, and accuracy.

Astronomy sortie missions definition study. Volume 2, book 1: Astronomy sortie program technical report

NASA Technical Reports Server (NTRS)

1972-01-01

The work performed to arrive at a baseline astronomy sortie mission concept is summarized. The material includes: (1) definition of the telescopes and arrays; (2) preliminary definition of mission and systems; (3) identification, definition, and evaluation of alternative sortie programs; (4) the recommended astronomy sortie program; and (5) the astronomy sortie program concept that was approved as a baseline for the remainder of the project.

Analysis of User Need with CD-ROM Databases: A Case Study Based on Work Sampling at One University Library.

ERIC Educational Resources Information Center

Wells, Amy Tracy

Analysis of the needs of users of Compact Disk-Read Only Memory (CD-ROM) was performed at the Tampa campus of the University of South Florida. A review of the literature indicated that problems associated with selecting the appropriate database, searching, and requiring technical assistance were the probable areas of user need. The library has 17…

Understanding and Managing Causality of Change in Socio-Technical Systems 3

DTIC Science & Technology

2012-01-06

influence, and (4) management and control. The questions are listed below. Dynamics and Context  What can be learned from patterns of causal...has proven to be an insufficient method to determine existence of behavioral and performance patterns . Cognitive work analysis, on the other hand...to provide a point of comparison, including Victorian bushfires, Queensland and Victorian floods, and the mine collapse in Chile. Privacy, Threats

The Effect of Technical Performance on Patient Outcomes in Surgery: A Systematic Review.

PubMed

Fecso, Andras B; Szasz, Peter; Kerezov, Georgi; Grantcharov, Teodor P

2017-03-01

Systematic review of the effect of intraoperative technical performance on patient outcomes. The operating room is a high-stakes, high-risk environment. As a result, the quality of surgical interventions affecting patient outcomes has been the subject of discussion and research for years. MEDLINE, EMBASE, PsycINFO, and Cochrane databases were searched. All surgical specialties were eligible for inclusion. Data were reviewed in regards to the methods by which technical performance was measured, what patient outcomes were assessed, and how intraoperative technical performance affected patient outcomes. Quality of evidence was assessed using the Medical Education Research Study Quality Instrument (MERSQI). Of the 12,758 studies initially identified, 24 articles (7775 total participants) were ultimately included in this review. Seventeen studies assessed the performance of the faculty alone, 2 assessed both the faculty and trainees, 1 assessed trainees alone, and in 4 studies, the level of the operating surgeon was not specified. In 18 studies, a performance assessment tool was used. Patient outcomes were evaluated using intraoperative complications, short-term morbidity, long-term morbidity, short-term mortality, and long-term mortality. The average MERSQI score was 11.67 (range 9.5-14.5). Twenty-one studies demonstrated that superior technical performance was related to improved patient outcomes. The results of this systematic review demonstrated that superior technical performance positively affects patient outcomes. Despite this initial evidence, more robust research is needed to directly assess intraoperative technical performance and its effect on postoperative patient outcomes using meaningful assessment instruments and reliable processes.

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOLID OXIDE FUEL CELL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-12-08

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with the option of piped-in water (Demonstration System A). Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burnmore » internal combustion engine. This technical progress report covers work performed by Delphi from January 1, 2003 to June 30, 2003, under Department of Energy Cooperative Agreement DE-FC-02NT41246. This report highlights technical results of the work performed under the following tasks: Task 1 System Design and Integration; Task 2 Solid Oxide Fuel Cell Stack Developments; Task 3 Reformer Developments; Task 4 Development of Balance of Plant (BOP) Components; Task 5 Manufacturing Development (Privately Funded); Task 6 System Fabrication; Task 7 System Testing; Task 8 Program Management; and Task 9 Stack Testing with Coal-Based Reformate.« less

SOLID STATE ENERGY CONVERSION ALLIANCE DELPHI SOFC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven Shaffer; Sean Kelly; Subhasish Mukerjee

2003-06-09

The objective of Phase I under this project is to develop a 5 kW Solid Oxide Fuel Cell power system for a range of fuels and applications. During Phase I, the following will be accomplished: Develop and demonstrate technology transfer efforts on a 5 kW stationary distributed power generation system that incorporates steam reforming of natural gas with piped-in water (Demonstration System A); and Initiate development of a 5 kW system for later mass-market automotive auxiliary power unit application, which will incorporate Catalytic Partial Oxidation (CPO) reforming of gasoline, with anode exhaust gas injected into an ultra-lean burn internal combustionmore » engine. This technical progress report covers work performed by Delphi from July through December 2002 under Department of Energy Cooperative Agreement DE-FC-02NT41246 for the 5 kW mass-market automotive (gasoline) auxiliary power unit. This report highlights technical results of the work performed under the following tasks for the automotive 5 kW system: Task 1--System Design and Integration; Task 2--Solid Oxide Fuel Cell Stack Developments; Task 3--Reformer Developments; Task 4--Development of Balance of Plant (BOP) Components; Task 5--Manufacturing Development (Privately Funded); Task 6--System Fabrication; and Task 7--System Testing.« less

NASA Photographer Prepares to Film a Mercury Capsule

NASA Image and Video Library

1959-06-21

National Aeronautics and Space Administration (NASA) photographer Arthur Laufman sets up a camera to film a Mercury capsule that was constructed by the Lewis Research Center staff. Lewis engineers and mechanics built two of the capsules for the upcoming Big Joe launches in September 1959. Big Joe was an attempt early in Project Mercury to use a full-scale Atlas booster to simulate the reentry of a mock-up Mercury capsule without actually placing it in orbit. The Photographic Branch, referred to as the Photo Lab, was part of the center’s Technical Reports Division. Originally the group performed normal and high-speed still image and motion picture photography. The photographers documented construction, performed publicity work, created images for reports, photographed data on manometer boards, and recorded test footage. Laufman joined the Photo Lab staff in 1948 and began producing full-length technical films as a tool to educate those outside of the agency on the research being conducted at Lewis. He worked with engineers to determine proper subjects for these films and develop a script. Laufman not only filmed tests, but also supporting footage of facilities, models, and staff members. He then edited the footage and added audio, visuals, and narration. The film masters were assigned standard identification numbers and add to the Photo Lab’s catalogue.

Technical Concept Document. Central Archive for Reusable Defense Software (CARDS)

DTIC Science & Technology

1994-02-28

FeNbry 1994 INFORMAL TECHNICAL REPORT For The SOFTWARE TECHNOLOGY FOR ADAPTABLE, RELIABLE SYSTEMS (STARS) Technical Concept Document Central Archive for...February 1994 INFORMAL TECHNICAL REPORT For The SOFTWARE TECHNOLOGY FOR ADAPTABLE, RELIABLE SYSTEMS (STARS) Technical Concept Document Central Archive...accordance with the DFARS Special Works Clause Developed by: This document, developed under the Software Technology for Adaptable, Reliable Systems

Conceptual design of closed Brayton cycle for coal-fired power generation

NASA Technical Reports Server (NTRS)

Shah, R. P.; Corman, J. C.

1977-01-01

The objectives to be realized in developing a closed cycle gas turbine are (1) to exploit high temperature gas turbine technology while maintaining a working fluid which is free from combustion gas contamination, (2) to achieve compact turbo-equipment designs through pressurization of the working fluid, and (3) to obtain relatively simple cycle configurations. The technical/economic performance of a specific closed cycle gas turbine system was evaluated through the development of a conceptual plant and system design. This energy conversion system is designed for electric utility service and to utilize coal directly in an environmentally acceptable manner.

Software Engineering Improvement Activities/Plan

NASA Technical Reports Server (NTRS)

2003-01-01

bd Systems personnel accomplished the technical responsibilities for this reporting period, as planned. A close working relationship was maintained with personnel of the MSFC Avionics Department Software Group (ED14). Work accomplishments included development, evaluation, and enhancement of a software cost model, performing literature search and evaluation of software tools available for code analysis and requirements analysis, and participating in other relevant software engineering activities. Monthly reports were submitted. This support was provided to the Flight Software Group/ED 1 4 in accomplishing the software engineering improvement engineering activities of the Marshall Space Flight Center (MSFC) Software Engineering Improvement Plan.

Space Transportation Propulsion Systems

NASA Technical Reports Server (NTRS)

Liou, Meng-Sing; Stewart, Mark E.; Suresh, Ambady; Owen, A. Karl

2001-01-01

This report outlines the Space Transportation Propulsion Systems for the NPSS (Numerical Propulsion System Simulation) program. Topics include: 1) a review of Engine/Inlet Coupling Work; 2) Background/Organization of Space Transportation Initiative; 3) Synergy between High Performance Computing and Communications Program (HPCCP) and Advanced Space Transportation Program (ASTP); 4) Status of Space Transportation Effort, including planned deliverables for FY01-FY06, FY00 accomplishments (HPCCP Funded) and FY01 Major Milestones (HPCCP and ASTP); and 5) a review current technical efforts, including a review of the Rocket-Based Combined-Cycle (RBCC), Scope of Work, RBCC Concept Aerodynamic Analysis and RBCC Concept Multidisciplinary Analysis.

SXI Prototype mirror mount

NASA Technical Reports Server (NTRS)

1995-01-01

This final report describes the work performed from June 1993 to January 1995. The purpose of this contract was to provide optomechanical engineering and fabrication support to the Solar X-ray Imager (SXI) program in the areas of mirror, optical bench and camera assemblies of the telescope. The Center for Applied Optics (CAO) worked closely with the Optics and S&E technical staff of MSFC to develop and investigate the most viable and economical options for the design and fabrication of a number of parts for the various telescope assemblies. All the tasks under this delivery order have been successfully completed within budget and schedule.

48 CFR 215.404-71-2 - Performance risk.

Code of Federal Regulations, 2010 CFR

2010-10-01

...—the technical uncertainties of performance. (2) Management/cost control—the degree of management... Technical (1) (2) N/A N/A 22 Management/Cost Control (1) (2) N/A N/A 23 Performance Risk (Composite) N/A (3...(percent) Assignedvalue (percent) Weightedvalue (percent) Technical 60 5.0 3.0 Management/Cost Control 40 4...

Assessing Students' Technical Skill Attainment

ERIC Educational Resources Information Center

Jorgensen, Haley

2010-01-01

The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

NREL Partners with Technical University of Denmark on Renewable Energy

Science.gov Websites

System | Energy Systems Integration Facility | NREL Technical University of Denmark NREL Partners with Technical University of Denmark on Renewable Energy System NREL is working in partnership with the Technical University of Denmark for the Centre for IT-Intelligent Energy Systems in Cities

Comment Deadlines Established Regarding the LightSquared Technical Working Group Report

DOT National Transportation Integrated Search

2011-06-30

On June 30, 2011, LightSquared Subsidiary LLC (LightSquared) submitted a final report of the : technical working group co-chaired by LightSquared and the United States Global Positioning System : (GPS) Industry Council (USGIC)1 and organized in respo...

A Sailor in the Los Alamos Navy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judd, D. L.; Meade, Roger Allen

As part of the War Department’s Manhattan Engineer District (MED), Los Alamos was an Army installation during World War II, complete with a base commander and a brace of MPs. But it was a unique Army installation, having more civilian then military personnel. Even more unique was the work performed by the civilian population, work that required highly educated scientists and engineers. As the breadth, scope, and complexity of the Laboratory’s work increased, more and more technically educated and trained personnel were needed. But, the manpower needs of the nation’s war economy had created a shortage of such people. Tomore » meet its manpower needs, the MED scoured the ranks of the Army for anyone who had technical training and reassigned these men to its laboratories, including Los Alamos, as part of its Special Engineer Detachment (SED). Among the SEDs assigned to Los Alamos was Val Fitch, who was awarded the Nobel Prize in Physics in 1980. Another was Al Van Vessem, who helped stack the TNT for the 100 ton test, bolted together the Trinity device, and rode shotgun with the bomb has it was driven from Los Alamos to ground zero.« less

New developments in digital pathology: from telepathology to virtual pathology laboratory.

PubMed

Kayser, Klaus; Kayser, Gian; Radziszowski, Dominik; Oehmann, Alexander

2004-01-01

To analyse the present status and future development of computerized diagnostic pathology in terms of work-flow integrative telepathology and virtual laboratory. Telepathology has left its childhood. The technical development of telepathology is mature, in contrast to that of virtual pathology. Two kinds of virtual pathology laboratories are emerging: a) those with distributed pathologists and distributed (>=1) laboratories associated to individual biopsy stations/surgical theatres, and b) distributed pathologists working in a centralized laboratory. Both are under technical development. Telepathology can be used for e-learning and e-training in pathology, as exemplarily demonstrated on Digital Lung Pathology Pathology (www.pathology-online.org). A virtual pathology institution (mode a) accepts a complete case with the patient's history, clinical findings, and (pre-selected) images for first diagnosis. The diagnostic responsibility is that of a conventional institution. The internet serves as platform for information transfer, and an open server such as the iPATH (http://telepath.patho.unibas.ch) for coordination and performance of the diagnostic procedure. The size of images has to be limited, and usual different magnifications have to be used. A group of pathologists is "on duty", or selects one member for a predefined duty period. The diagnostic statement of the pathologist(s) on duty is retransmitted to the sender with full responsibility. First experiences of a virtual pathology institution group working with the iPATH server (Dr. L. Banach, Dr. G. Haroske, Dr. I. Hurwitz, Dr. K. Kayser, Dr. K.D. Kunze, Dr. M. Oberholzer,) working with a small hospital of the Salomon islands are promising. A centralized virtual pathology institution (mode b) depends upon the digitalisation of a complete slide, and the transfer of large sized images to different pathologists working in one institution. The technical performance of complete slide digitalisation is still under development and does not completely fulfil the requirements of a conventional pathology institution at present. VIRTUAL PATHOLOGY AND E-LEARNING: At present, e-learning systems are "stand-alone" solutions distributed on CD or via internet. A characteristic example is the Digital Lung Pathology CD (www.pathology-online.org), which includes about 60 different rare and common lung diseases and internet access to scientific library systems (PubMed), distant measurement servers (EuroQuant), or electronic journals (Elec J Pathol Histol). A new and complete data base based upon this CD will combine e-learning and e-teaching with the actual workflow in a virtual pathology institution (mode a). The technological problems are solved and do not depend upon technical constraints such as slide scanning systems. Telepathology serves as promotor for a new landscape in diagnostic pathology, the so-called virtual pathology institution. Industrial and scientific efforts will probably allow an implementation of this technique within the next two years.

Implementation Plan for Qualification of Sodium-Cooled Fast Reactor Technology Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne; Honma, George

This document identifies and discusses implementation elements that can be used to facilitate consistent and systematic evaluation processes relating to quality attributes of technical information (with focus on SFR technology) that will be used to support licensing of advanced reactor designs. Information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The approach for determining acceptability of test data, analysis, and/or other technical informationmore » is based on guidance provided in INL/EXT-15-35805, “Guidance on Evaluating Historic Technology Information for Use in Advanced Reactor Licensing.” The implementation plan can be adopted into a working procedure at each of the national laboratories performing data qualification, or by applicants seeking future license application for advanced reactor technology.« less

Maternal employment and atopic dermatitis in children: a prospective cohort study.

PubMed

Wang, I J; Wen, H J; Chiang, T L; Lin, S J; Chen, P C; Guo, Y L

2013-04-01

Considering the early onset of atopic dermatitis (AD), which most often arises in the first year of life, risk factors occurring very early in life must be considered. Little is known about the effects of maternal occupational exposure on the development of atopic disorders in children. The aim of this study was to evaluate associations between maternal employment and childhood AD. We used multistage stratified systematic sampling to recruit 24,200 mother-newborn pairs from the Taiwan national birth register. Information on maternal occupation categories, work stress, working time, shift work and potential confounders during pregnancy was gathered by questionnaires after birth. At 3 years of age, information on the development of AD was assessed by home interviews. Multiple logistic regression analysis was performed to estimate the association of maternal employment and AD. Overall, 11,962 out of 19,381 mothers (61·7%) worked during pregnancy. The children of mothers who worked during pregnancy had an increased risk of AD compared with those whose mothers did not work [odds ratio (OR) 1·38, 95% confidence interval (CI) 1·25-1·53]. The children of mothers with a professional or technical occupation had a higher risk of AD (OR 1·64, 95% CI 1·44-1·87). The risk of AD was found to increase with maternal work stress during pregnancy in a dose-response manner (P(trend)<0·01). The mothers of children with AD had a longer working time than those without AD (P<0·0001). However, no significant association between AD and maternal shift work was found. Working in professional or technical occupations increased the risk of childhood AD in addition to work stress during pregnancy. © 2013 The Authors. BJD © 2013 British Association of Dermatologists.

Energy Systems Integration News | Energy Systems Integration Facility |

Science.gov Websites

facility. "We try to scope out some technical work that is based on the fundamental problem that technical or market problem that they're trying to solve, and then we'll scope out work with them based on that visit. "The second step is to begin to break that scope of work into what I call three

High School Work and Family Life ITAC [Integrated Technical & Academic Competencies] for Career-Focused Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

This document contains a guide to implementing the Ohio Work and Family Life ITAC (Integrated Technical and Academic Competencies), which connects to the Ohio Model Competency-Based Program documents in arts, foreign languages, language arts, mathematics, science, and social studies, as well as the Core ITAC document. The Work and Family Life ITAC…

Multi-Cultural Competency-Based Vocational Curricula. Machine Trades. Multi-Cultural Competency-Based Vocational/Technical Curricula Series.

ERIC Educational Resources Information Center

Hepburn, Larry; Shin, Masako

This document, one of eight in a multi-cultural competency-based vocational/technical curricula series, is on machine trades. This program is designed to run 36 weeks and cover 6 instructional areas: use of measuring tools; benchwork/tool bit grinding; lathe work; milling work; precision grinding; and combination machine work. A duty-task index…

Environment, Safety, and Health Self-Assessment Report, Fiscal Year 2008

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chernowski, John

2009-02-27

Lawrence Berkeley National Laboratory's Environment, Safety, and Health (ES&H) Self-Assessment Program ensures that Integrated Safety Management (ISM) is implemented institutionally and by all divisions. The Self-Assessment Program, managed by the Office of Contract Assurance (OCA), provides for an internal evaluation of all ES&H programs and systems at LBNL. The functions of the program are to ensure that work is conducted safely, and with minimal negative impact to workers, the public, and the environment. The Self-Assessment Program is also the mechanism used to institute continuous improvements to the Laboratory's ES&H programs. The program is described in LBNL/PUB 5344, Environment, Safety, andmore » Health Self-Assessment Program and is composed of four distinct assessments: the Division Self-Assessment, the Management of Environment, Safety, and Health (MESH) review, ES&H Technical Assurance, and the Appendix B Self-Assessment. The Division Self-Assessment uses the five core functions and seven guiding principles of ISM as the basis of evaluation. Metrics are created to measure performance in fulfilling ISM core functions and guiding principles, as well as promoting compliance with applicable regulations. The five core functions of ISM are as follows: (1) Define the Scope of Work; (2) Identify and Analyze Hazards; (3) Control the Hazards; (4) Perform the Work; and (5) Feedback and Improvement. The seven guiding principles of ISM are as follows: (1) Line Management Responsibility for ES&H; (2) Clear Roles and Responsibilities; (3) Competence Commensurate with Responsibilities; (4) Balanced Priorities; (5) Identification of ES&H Standards and Requirements; (6) Hazard Controls Tailored to the Work Performed; and (7) Operations Authorization. Performance indicators are developed by consensus with OCA, representatives from each division, and Environment, Health, and Safety (EH&S) Division program managers. Line management of each division performs the Division Self-Assessment annually. The primary focus of the review is workplace safety. The MESH review is an evaluation of division management of ES&H in its research and operations, focusing on implementation and effectiveness of the division's ISM plan. It is a peer review performed by members of the LBNL Safety Review Committee (SRC), with staff support from OCA. Each division receives a MESH review every two to four years, depending on the results of the previous review. The ES&H Technical Assurance Program (TAP) provides the framework for systematic reviews of ES&H programs and processes. The intent of ES&H Technical Assurance assessments is to provide assurance that ES&H programs and processes comply with their guiding regulations, are effective, and are properly implemented by LBNL divisions. The Appendix B Performance Evaluation and Measurement Plan (PEMP) requires that LBNL sustain and enhance the effectiveness of integrated safety, health, and environmental protection through a strong and well-deployed system. Information required for Appendix B is provided by EH&S Division functional managers. The annual Appendix B report is submitted at the close of the fiscal year. This assessment is the Department of Energy's (DOE) primary mechanism for evaluating LBNL's contract performance in ISM.« less

Advanced composite fuselage technology

NASA Technical Reports Server (NTRS)

Ilcewicz, Larry B.; Smith, Peter J.; Horton, Ray E.

1993-01-01

Boeing's ATCAS program has completed its third year and continues to progress towards a goal to demonstrate composite fuselage technology with cost and weight advantages over aluminum. Work on this program is performed by an integrated team that includes several groups within The Boeing Company, industrial and university subcontractors, and technical support from NASA. During the course of the program, the ATCAS team has continued to perform a critical review of composite developments by recognizing advances in metal fuselage technology. Despite recent material, structural design, and manufacturing advancements for metals, polymeric matrix composite designs studied in ATCAS still project significant cost and weight advantages for future applications. A critical path to demonstrating technology readiness for composite transport fuselage structures was created to summarize ATCAS tasks for Phases A, B, and C. This includes a global schedule and list of technical issues which will be addressed throughout the course of studies. Work performed in ATCAS since the last ACT conference is also summarized. Most activities relate to crown quadrant manufacturing scaleup and performance verification. The former was highlighted by fabricating a curved, 7 ft. by 10 ft. panel, with cocured hat-stiffeners and cobonded J-frames. In building to this scale, process developments were achieved for tow-placed skins, drape formed stiffeners, braided/RTM frames, and panel cure tooling. Over 700 tests and supporting analyses have been performed for crown material and design evaluation, including structural tests that demonstrated limit load requirements for severed stiffener/skin failsafe damage conditions. Analysis of tests for tow-placed hybrid laminates with large damage indicates a tensile fracture toughness that is higher than that observed for advanced aluminum alloys. Additional recent ATCAS achievements include crown supporting technology, keel quadrant design evaluation, and sandwich process development.

A procedural skills OSCE: assessing technical and non-technical skills of internal medicine residents.

PubMed

Pugh, Debra; Hamstra, Stanley J; Wood, Timothy J; Humphrey-Murto, Susan; Touchie, Claire; Yudkowsky, Rachel; Bordage, Georges

2015-03-01

Internists are required to perform a number of procedures that require mastery of technical and non-technical skills, however, formal assessment of these skills is often lacking. The purpose of this study was to develop, implement, and gather validity evidence for a procedural skills objective structured clinical examination (PS-OSCE) for internal medicine (IM) residents to assess their technical and non-technical skills when performing procedures. Thirty-five first to third-year IM residents participated in a 5-station PS-OSCE, which combined partial task models, standardized patients, and allied health professionals. Formal blueprinting was performed and content experts were used to develop the cases and rating instruments. Examiners underwent a frame-of-reference training session to prepare them for their rater role. Scores were compared by levels of training, experience, and to evaluation data from a non-procedural OSCE (IM-OSCE). Reliability was calculated using Generalizability analyses. Reliabilities for the technical and non-technical scores were 0.68 and 0.76, respectively. Third-year residents scored significantly higher than first-year residents on the technical (73.5 vs. 62.2%) and non-technical (83.2 vs. 75.1%) components of the PS-OSCE (p < 0.05). Residents who had performed the procedures more frequently scored higher on three of the five stations (p < 0.05). There was a moderate disattenuated correlation (r = 0.77) between the IM-OSCE and the technical component of the PS-OSCE scores. The PS-OSCE is a feasible method for assessing multiple competencies related to performing procedures and this study provides validity evidence to support its use as an in-training examination.

The Library Work Order Processing System: A New Approach to Motivate Employees and to Increase Production in the Technical Service Department of Mercer County Community College Library. Applied Educational Research and Evaluation.

ERIC Educational Resources Information Center

Sim, Yong Sup

After reviewing the current movement toward job enrichment, a system was designed for the technical services department of the Mercer County Community College Library. The Library Work Order Processing System, as tried between January and March, 1974, was designed to permit each worker more variety of jobs. The technical services department was…

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Technical Reports Server (NTRS)

Raiman, Laura B.

1992-01-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Implementation of quality improvement techniques for management and technical processes in the ACRV project

NASA Astrophysics Data System (ADS)

Raiman, Laura B.

1992-12-01

Total Quality Management (TQM) is a cooperative form of doing business that relies on the talents of everyone in an organization to continually improve quality and productivity, using teams and an assortment of statistical and measurement tools. The objective of the activities described in this paper was to implement effective improvement tools and techniques in order to build work processes which support good management and technical decisions and actions which are crucial to the success of the ACRV project. The objectives were met by applications in both the technical and management areas. The management applications involved initiating focused continuous improvement projects with widespread team membership. The technical applications involved applying proven statistical tools and techniques to the technical issues associated with the ACRV Project. Specific activities related to the objective included working with a support contractor team to improve support processes, examining processes involved in international activities, a series of tutorials presented to the New Initiatives Office and support contractors, a briefing to NIO managers, and work with the NIO Q+ Team. On the technical side, work included analyzing data from the large-scale W.A.T.E.R. test, landing mode trade analyses, and targeting probability calculations. The results of these efforts will help to develop a disciplined, ongoing process for producing fundamental decisions and actions that shape and guide the ACRV organization .

Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players

PubMed Central

Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

2016-01-01

Background There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players’ technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. Objectives The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Methods Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h-1), accelerations and decelerations (> 2.0 m•s-2 and - 2.0 m•s-2), metabolic power (W•kg-1), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. Results All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P < 0.05; moderate to very large ES: 1.08 - 3.30). However, technical performance parameters did not vary across quarters (P > 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). Conclusions The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG’s for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical elements. PMID:28144411

Temporal Changes in Technical and Physical Performances During a Small-Sided Game in Elite Youth Soccer Players.

PubMed

Moreira, Alexandre; Saldanha Aoki, Marcelo; Carling, Chris; Alan Rodrigues Lopes, Rafael; Felipe Schultz de Arruda, Ademir; Lima, Marcelo; Cesar Correa, Umberto; Bradley, Paul S

2016-12-01

There have been claims that small-sided games (SSG) may generate an appropriate environment to develop youth players' technical performance associated to game-related problem solving. However, the temporal change in technical performance parameters of youth players during SSG is still unknown. The aim of this study was to examine temporal changes in technical and physical performances during a small-sided game (SSG) in elite soccer players. Sixty elite youth players (age 14.8 ± 0.2 yr; stature 177 ± 5 cm; body mass 66.2 ± 4.7 kg) completed a 5 v 5 SSG using two repetitions of 8 minutes interspersed by 3 minutes of passive recovery. To evaluate temporal changes in performance, the data were analysed across 4 minutes quarters. Physical performance parameters included the total distance covered (TDC), the frequency of sprints (>18 km•h -1 ), accelerations and decelerations (> 2.0 m•s -2 and - 2.0 m•s -2 ), metabolic power (W•kg -1 ), training impulse (TRIMP), TDC: TRIMP, number of impacts, and body load. Technical performance parameters included goal attempts, total number of tackles, tackles and interceptions, total number of passes, and passes effectiveness. All physical performance parameters decreased from the first to the last quarter with notable declines in TDC, metabolic power and the frequency of sprints, accelerations and decelerations (P < 0.05; moderate to very large ES: 1.08 - 3.30). However, technical performance parameters did not vary across quarters (P > 0.05; trivial ES for 1st v 4th quarters: 0.15 - 0.33). The data demonstrate that technical performance is maintained despite substantial declines in physical performance during a SSG in elite youth players. This finding may have implications for designing SSG's for elite youth players to ensure physical, technical and tactical capabilities are optimized. Modifications in player number, pitch dimensions, rules, coach encouragement, for instance, should be included taking into account the main aim of a given session and then focused on overloading physical or technical elements.

Training for single port video assisted thoracoscopic surgery lung resections.

PubMed

McElnay, Philip J; Lim, Eric

2015-11-01

With many surgical training programmes providing less time for training it can be challenging for trainees to acquire the necessary surgical skills to perform complex video assisted thoracoscopic surgery (VATS) lung resections. Indeed as the utilization of single port operations increases the need to approach the operating theatre with already-existing excellent hand-eye coordination skills increases. We suggest that there are a number of ways that trainees can begin to develop these necessary skills. Firstly, using computer games that involve changing horizons and orientations. Secondly, utilizing box-trainers to practice using the thoracoscopic instruments. Thirdly, learning how essential tools such as the stapler work. Trainees will then be able to progress to meaningfully assisting in theatre and indeed learning how to perform the operation themselves. At this stage is useful to observe expert surgeons whilst they operate-to watch both their technical and non-technical skills. Ultimately, surgery is a learned skill and requires implementation of these techniques over a sustained period of time.

Slow magnetic monopoles search in NOvA

NASA Astrophysics Data System (ADS)

Antoshkin, Alexander; Frank, Martin

2018-04-01

The NOvA far detector is well suited for finding exotic particles due to its technical features (see [1]). One type of those exotic particles is a "slow" magnetic monopole. It is assumed that the energy deposition of such monopoles should be enough to be registered (see [2]). Measurement of the expected signals was performed on the NOvA test bench at JINR (see [3]). Result of this measurement allows us to perform slow monopole's research using NOvA software and hardware with high efficiency. As a whole, the research can lead to a discovery, or it can limit the existence of monopoles in a wide range of parameters, previously unreachable in other experiments (MACRO, SLIM, RICE, IceCube). Several special software tools have been developed. Slow Monopole Trigger has been created and implemented in the NOvA Data-Driven-Trigger system. Also, an online reconstruction algorithm has been developed and tested on 5% of the data. A technical description of these tools and current results of the analysis are presented in this work.

Energy retrofit of an office building by substitution of the generation system: performance evaluation via dynamic simulation versus current technical standards

NASA Astrophysics Data System (ADS)

Testi, D.; Schito, E.; Menchetti, E.; Grassi, W.

2014-11-01

Constructions built in Italy before 1945 (about 30% of the total built stock) feature low energy efficiency. Retrofit actions in this field can lead to valuable energetic and economic savings. In this work, we ran a dynamic simulation of a historical building of the University of Pisa during the heating season. We firstly evaluated the energy requirements of the building and the performance of the existing natural gas boiler, validated with past billings of natural gas. We also verified the energetic savings obtainable by the substitution of the boiler with an air-to-water electrically-driven modulating heat pump, simulated through a cycle-based model, evaluating the main economic metrics. The cycle-based model of the heat pump, validated with manufacturers' data available only at specified temperature and load conditions, can provide more accurate results than the simplified models adopted by current technical standards, thus increasing the effectiveness of energy audits.

Enhanced Versus Conventional Sludge Anaerobic Processes: Performances and Techno-Economic Assessment.

PubMed

Gianico, Andrea; Bertanza, Giorgio; Braguglia, Camilla M; Canato, Matteo; Gallipoli, Agata; Laera, Giuseppe; Levantesi, Caterina; Mininni, Giuseppe

2016-05-01

Sewage sludge processing is a key issue in water resource recovery facilities due to the inefficacy of conventional treatments to produce high quality biosolids to be safely used in agriculture. Under this framework, the performances of several enhanced stabilization processes, namely ultrasound-pretreated Mesophilic Anaerobic Digestion (US+MAD), thermophilic anaerobic digestion (TAD), thermal-pretreated TAD (TH+TAD) and ultrasound-pretreated inverse Temperature Phased Anaerobic Digestion (US+iTPAD) have been investigated. Such enhanced processes resulted in higher biogas yields and higher destruction of pathogens with respect to conventional MAD process, thus suggesting their feasibility in full-scale implementation perspectives. A procedure for technical-economic comparison of new sludge processing lines against conventional ones (benchmarking) was developed, based on the definition of technical issues (e.g. reliability, complexity, etc.) which are rated for each situation. Moreover, capital and operating costs were estimated. The enhanced processes analyzed in this work showed some potentially critical items, mainly related to energy balance and reagent consumption.

ScreenMasker: An Open-source Gaze-contingent Screen Masking Environment.

PubMed

Orlov, Pavel A; Bednarik, Roman

2016-09-01

The moving-window paradigm, based on gazecontingent technic, traditionally used in a studies of the visual perceptual span. There is a strong demand for new environments that could be employed by non-technical researchers. We have developed an easy-to-use tool with a graphical user interface (GUI) allowing both execution and control of visual gaze-contingency studies. This work describes ScreenMasker, an environment that allows create gaze-contingent textured displays used together with stimuli presentation software. ScreenMasker has an architecture that meets the requirements of low-latency real-time eye-movement experiments. It also provides a variety of settings and functions. Effective rendering times and performance are ensured by means of GPU processing under CUDA technology. Performance tests show ScreenMasker's latency to be 67-74 ms on a typical office computer, and high-end 144-Hz screen latencies of about 25-28 ms. ScreenMasker is an open-source system distributed under the GNU Lesser General Public License and is available at https://github.com/PaulOrlov/ScreenMasker .

Putting EVM to the Test

NASA Technical Reports Server (NTRS)

Kerby, Jerald; Counts, Stacy

2005-01-01

IN MANY INSTANCES THERE IS NO FOREWARNING; SCHEDULES slip, costs soar, and the project manager is faced with the near impossible task of explaining why each impact occurred. With contractors performing the majority of the work, the management job can become even more obscure. The simple lack of proximity to the contractor can limit effective communication. Add to that a mixture of cultural differences and a desire for the contractor to portray the most optimistic view of their performance, and you create an even more difficult task for the project manager. This was the scenario when the Habitat Holding Rack (HHR) manager at Marshall Space Flight Center (MSFC), Stacy Counts, was introduced to the overall concept of Earned Value Management (EVM). Faced with increased costs (which eventually resulted in decreased scope of the project), continued schedule slides, and several technical anomalies, she was looking for a way to gain a better handle on the project performance. As a component of the Space Station Biological Research Program (SSBRP), the HHR project is an integral piece of the Program content. The HHR is the first rack hardware to be delivered for the Program and has therefore been the first rack to move through the trials of test and verification-documenting anomalies and technical difficulties that will benefit the other SSBRP rack projects. For these reasons, the HHR maintained high visibility throughout the manufacturing and assembly process, continuing through test and verification activities. Needless to say, the higher visibility emphasized the need for improved performance on this project. And to improve project performance, Stacy first had to figure out how to measure the cost, schedule and technical objectives effectively.

The Relationship of Aptitudes to the Performance of Skilled Technical Jobs in Engine Manufacturing. Technical Report 1982-5 [and Supplement].

ERIC Educational Resources Information Center

Daniel, Mark; And Others

A study examined the relationship of aptitudes to the performance of skilled technical jobs in engine manufacturing. During the study, several approaches were utilized, including criterion-referenced validation, taxonomic validation, construct validation, and detailed anlaysis of the behaviors involved in performing the jobs. The study sample…

Tactical and operational response to major incidents: feasibility and reliability of skills assessment using novel virtual environments.

PubMed

Cohen, Daniel; Sevdalis, Nick; Patel, Vishal; Taylor, Michael; Lee, Henry; Vokes, Mick; Heys, Mick; Taylor, David; Batrick, Nicola; Darzi, Ara

2013-07-01

To determine feasibility and reliability of skills assessment in a multi-agency, triple-site major incident response exercise carried out in a virtual world environment. Skills assessment was carried out across three scenarios. The pre-hospital scenario required paramedics to triage and treat casualties at the site of an explosion. Technical skills assessment forms were developed using training syllabus competencies and national guidelines identified by pre-hospital response experts. Non-technical skills were assessed using a seven-point scale previously developed for use by pre-hospital paramedics. The two in-hospital scenarios, focusing on a trauma team leader and a silver/clinical major incident co-ordinator, utilised the validated Trauma-NOTECHS scale to assess five domains of performance. Technical competencies were assessed using an ATLS-style competency scale for the trauma scenario. For the silver scenario, the assessment document was developed using competencies described from a similar role description in a real-life hospital major incident plan. The technical and non-technical performance of all participants was assessed live by two experts in each of the three scenarios and inter-assessor reliability was computed. Participants also self-assessed their performance using identical proformas immediately after the scenarios were completed. Self and expert assessments were correlated (assessment cross-validation). Twenty-three participants underwent all scenarios and assessments. Performance assessments were feasible for both experts as well as the participants. Non-technical performance was generally scored higher than technical performance. Very good inter-rater reliability was obtained between expert raters across all scenarios and both technical and non-technical aspects of performance (reliability range 0.59-0.90, Ps<0.01). Significant positive correlations were found between self and expert assessment in technical skills across all three scenarios (correlation range 0.52-0.84, Ps<0.05), although no such correlations were observed in non-technical skills. This study establishes feasibility and reliability of virtual environment technical and non-technical skills assessment in major incident scenarios for the first time. The development for further scenarios and validated assessment scales will enable major incident planners to utilise virtual technologies for improved major incident preparation and training. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Lessons Learned from the Development and Implementation of the Atmosphere Resource Recovery and Environmental Monitoring Project

NASA Technical Reports Server (NTRS)

Roman, Monsi C.; Perry, Jay L.; Howard, David F.

2014-01-01

The Advanced Exploration Systems (AES) Program's Atmosphere Resource Recovery and Environmental Monitoring (ARREM) Project have been developing atmosphere revitalization and environmental monitoring subsystem architectures suitable for enabling sustained crewed exploration missions beyond low Earth orbit (LEO). Using the International Space Station state-of-the-art (SOA) as the technical basis, the ARREM Project has contributed to technical advances that improve affordability, reliability, and functional efficiency while reducing dependence on a ground-based logistics resupply model. Functional demonstrations have merged new process technologies and concepts with existing ISS developmental hardware and operate them in a controlled environment simulating various crew metabolic loads. The ARREM Project's strengths include access to a full complement of existing developmental hardware that perform all the core atmosphere revitalization functions, unique testing facilities to evaluate subsystem performance, and a coordinated partnering effort among six NASA field centers and industry partners to provide the innovative expertise necessary to succeed. A project overview is provided and the project management strategies that have enabled a multidiscipinary engineering team to work efficiently across project, NASA field center, and industry boundaries to achieve the project's technical goals are discussed. Lessons learned and best practices relating to the project are presented and discussed.

[Cooperation between an NGO and "host" states in the control of leprosy in Latin America].

PubMed

Kalk, Andreas

2003-01-01

The proliferation of nongovernmental organizations (NGOs) can be considered the result of the inability of the current democratic system to perform all the tasks desired by its citizens. Although NGOs often do quite positive work, they tend to diminish governmental power and are capable of interfering in the internal affairs of other countries. In this context, there are efforts to control their activities, and this control can produce both negative effects (blocking the defense of human rights) and positive ones (correcting the lack of coordination in the work by NGOs). NGOs working with the control of leprosy have a long history of cooperation with "host" states in Latin America. In the worst cases they work in a vacuum left by the state. In a country like Brazil, where the government prioritizes the control of Hansen disease and community participation in the political process - NGOs generally work "in harmony" with national authorities. The most useful contribution to state efforts has been the technical and financial support for training health personnel, supervision, and awareness-raising campaigns. Thus, the NGO becomes "quasi-governmental" in performing its tasks.

Lake States regional forest resources assessment: technical papers.

Treesearch

Henry H. Webster; J. Michael Vasievich

1997-01-01

Contains 21 technical working papers prepared for the Lake States regional forest resources assessment, Lake States Forestry Alliance 1995. They represent significant contributions from many individuals and organizations and form the technical background for the assessment.

Skill, Judgement and Conduct for the First Generation of Neurosurgeons, 1900-1930.

PubMed

Gavrus, Delia

2015-07-01

Historical contingency complicates a reading of skill as a self-explanatory and always positive attribute. By focusing on the attempts of the first generation of neurosurgeons to build a community and fashion a collective neurosurgical self, this article highlights the extent to which the relationship between surgical skill and professional judgement is reflected in broader concerns that shape the landscape of medicine at a given time. Some early twentieth-century surgeons expressed concern about the spectacularisation of surgery and the skilful but problematic work of 'brilliant operators'. The neurosurgeons' policies of inclusion and exclusion show that in the process of fashioning a neurosurgical persona, this first generation sanctioned specific norms of conduct underwritten by similar moral imperatives, such as self-control. These norms governed the doctors' work both in the operating room and on the public stage (in their engagement with the press). The meetings of the first neurosurgical society staged a critical encounter between the host neurosurgeon and the members who watched him perform surgery. These technical performances in the operating theatre, followed by discussions, were designed to encourage particular norms, to negotiate surgical knowledge, and to demonstrate the skills and character of the neurosurgeon. The performances acted as a technology of the self that aligned the operator to a community and helped that community refine its norms of surgical conduct. The awkward surgeon with inferior technical ability was preferable to the brilliant but vain operator who lacked the capacity to judge when he should not deploy his spectacular skills.

29 CFR 95.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., record of past performance, financial and technical resources or accessibility to other necessary..., whenever practicable, of technical requirements in terms of functions to be performed or performance...

15 CFR 14.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., record of past performance, financial and technical resources or accessibility to other necessary... practicable, of technical requirements in terms of functions to be performed or performance required...

The Roles of Technical Communication Researchers in Design Scholarship

ERIC Educational Resources Information Center

Sánchez, Fernando

2017-01-01

Design has come to be understood as an essential aspect of the work that technical communicators claim. As a result, research in the field of technical communication has approached studies of design in numerous ways. This article showcases how technical communication researchers assume the roles of observers, testers, critics, creators, and…

IMPLICATIONS OF WOMEN'S WORK PATTERNS FOR PROGRAM DEVELOPMENT IN VOCATIONAL AND TECHNICAL EDUCATION.

ERIC Educational Resources Information Center

LEE, SYLVIA L.; AND OTHERS

THE IMPLICATIONS OF WOMEN'S LABOR FORCE PARTICIPATION FOR EDUCATORS AND LEADERS PLANNING PROGRAMS IN VOCATIONAL AND TECHNICAL EDUCATION WERE DERIVED AT A 2-DAY CONFERENCE BY 30 PEOPLE REPRESENTING THE VARIOUS SERVICES IN VOCATIONAL-TECHNICAL EDUCATION AND RELATED AREAS. IMPLICATIONS AND RECOMMENDATIONS FOR VOCATIONAL AND TECHNICAL EDUCATION…

A Revision of Technical Mathematics Based on the NCTM Standards. Final Report.

ERIC Educational Resources Information Center

Near, Barbara

Between 1993 and 1996, Henry Ford Community College (Michigan) worked with business, industry, and technical instructors to revise their Technical Mathematics program in accordance with the National Council of Teachers of Mathematics (NCTM) Standards. The purpose of the project was to restructure the technical math curriculum and create a context…

Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

PubMed

Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

2017-07-01

The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P < 0.001). A 21% discordance between technically and nontechnically competent trainees was identified (P < 0.001). ROC analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P < 0.001). The present study presents defensible standards for technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

Simulated spinal cerebrospinal fluid leak repair: an educational model with didactic and technical components.

PubMed

Ghobrial, George M; Anderson, Paul A; Chitale, Rohan; Campbell, Peter G; Lobel, Darlene A; Harrop, James

2013-10-01

In the era of surgical resident work hour restrictions, the traditional apprenticeship model may provide fewer hours for neurosurgical residents to hone technical skills. Spinal dura mater closure or repair is 1 skill that is infrequently encountered, and persistent cerebrospinal fluid leaks are a potential morbidity. To establish an educational curriculum to train residents in spinal dura mater closure with a novel durotomy repair model. The Congress of Neurological Surgeons has developed a simulation-based model for durotomy closure with the ongoing efforts of their simulation educational committee. The core curriculum consists of didactic training materials and a technical simulation model of dural repair for the lumbar spine. Didactic pretest scores ranged from 4/11 (36%) to 10/11 (91%). Posttest scores ranged from 8/11 (73%) to 11/11 (100%). Overall, didactic improvements were demonstrated by all participants, with a mean improvement between pre- and posttest scores of 1.17 (18.5%; P = .02). The technical component consisted of 11 durotomy closures by 6 participants, where 4 participants performed multiple durotomies. Mean time to closure of the durotomy ranged from 490 to 546 seconds in the first and second closures, respectively (P = .66), whereby the median leak rate improved from 14 to 7 (P = .34). There were also demonstrative technical improvements by all. Simulated spinal dura mater repair appears to be a potentially valuable tool in the education of neurosurgery residents. The combination of a didactic and technical assessment appears to be synergistic in terms of educational development.

Business Teachers Go to Work and Students Get the Dividends

ERIC Educational Resources Information Center

Stephens, Geralyn E.

2010-01-01

Teacher internships give business education teachers the opportunity to increase their industry skill proficiency levels. Such experiences can help business education teachers focus on developing relevant technical knowledge and skills to better prepare students for technically enhanced work environments and demonstrate competency on technical…

The Independent Technical Analysis Process Final Report 2006-2007.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duberstein, Corey; Ham, Kenneth; Dauble, Dennis

2007-03-01

The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities. The Independent Technical Analysis Process (ITAP) was created to provide non-routine analysis for fish and wildlife agencies and tribes in particular and the public in general on matters related tomore » juvenile and adult salmon and steelhead passage through the mainstem hydrosystem. The process was designed to maintain the independence of analysts and reviewers from parties requesting analyses, to avoid potential bias in technical products. The objectives identified for this project were to administer a rigorous, transparent process to deliver unbiased technical assistance necessary to coordinate recommendations for storage reservoir and river operations that avoid potential conflicts between anadromous and resident fish. Seven work elements, designated by numbered categories in the Pisces project tracking system, were created to define and accomplish project goals as follows: (1) 118 Coordination - Coordinate technical analysis and review process: (a) Retain expertise for analyst/reviewer roles. (b) Draft research directives. (c) Send directive to the analyst. (d) Coordinate two independent reviews of the draft report. (e) Ensure reviewer comments are addressed within the final report. (2) 162 Analyze/Interpret Data - Implement the independent aspects of the project. (3) 122 Provide Technical Review - Implement the review process for the analysts. (4) 132 Produce Annual Report - FY06 annual progress report with Pisces Disseminate (5) 161 Disseminate Raw/Summary Data and Results - Post technical products on the ITAP web site. (6) 185-Produce Pisces Status Report - Provide periodic status reports to BPA. (7) 119 Manage and Administer Projects - project/contract administration.« less

Researching College- and Career Ready Standards to Improve Student Outcomes: Technical Working Group Meeting. Meeting Summary (Washington, DC, August 19-20, 2013)

ERIC Educational Resources Information Center

Institute of Education Sciences, 2013

2013-01-01

In August, IES worked with the National Science Foundation and the Eunice Kennedy Shriver National Institute of Child Health and Human Development to convene a technical working group to discuss research objectives related to college- and career-ready standards in English language arts and mathematics. Forty people (including researchers,…

Resource Letter MP-1: The Manhattan Project and related nuclear research

NASA Astrophysics Data System (ADS)

Reed, B. Cameron

2005-09-01

This Resource Letter provides a guide to literature on the Manhattan Project and related nuclear research. Books and journal articles are cited for the following topics: general works, technical works, biographical and autobiographical works, the German nuclear program, and technical papers of historical interest. A list of videos and websites dealing with the Manhattan Project, nuclear weapons, and nuclear issues is also given.

45 CFR 2543.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

36 CFR 1210.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

14 CFR 1260.144 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., record of past performance, financial and technical resources or accessibility to other necessary... technical requirements in terms of functions to be performed or performance required, including the range of...

Automated work packages architecture: An initial set of human factors and instrumentation and controls requirements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agarwal, Vivek; Oxstrand, Johanna H.; Le Blanc, Katya L.

The work management process in current fleets of national nuclear power plants is so highly dependent on large technical staffs and quality of work instruction, i.e., paper-based, that this puts nuclear energy at somewhat of a long-term economic disadvantage and increase the possibility of human errors. Technologies like mobile portable devices and computer-based procedures can play a key role in improving the plant work management process, thereby increasing productivity and decreasing cost. Automated work packages are a fundamentally an enabling technology for improving worker productivity and human performance in nuclear power plants work activities because virtually every plant work activitymore » is accomplished using some form of a work package. As part of this year’s research effort, automated work packages architecture is identified and an initial set of requirements identified, that are essential and necessary for implementation of automated work packages in nuclear power plants.« less

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2014 CFR

2014-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2014-07-01 2014-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2011 CFR

2011-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2011-07-01 2011-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...

32 CFR 37.895 - How is the final performance report to be sent to the Defense Technical Information Center?

Code of Federal Regulations, 2013 CFR

2013-07-01

... How is the final performance report to be sent to the Defense Technical Information Center? (a... 32 National Defense 1 2013-07-01 2013-07-01 false How is the final performance report to be sent to the Defense Technical Information Center? 37.895 Section 37.895 National Defense Department of...