Motion control of multi-actuator hydraulic systems for mobile machineries: Recent advancements and future trends

NASA Astrophysics Data System (ADS)

Xu, Bing; Cheng, Min

2018-06-01

This paper presents a survey of recent advancements and upcoming trends in motion control technologies employed in designing multi-actuator hydraulic systems for mobile machineries. Hydraulic systems have been extensively used in mobile machineries due to their superior power density and robustness. However, motion control technologies of multi-actuator hydraulic systems have faced increasing challenges due to stringent emission regulations. In this study, an overview of the evolution of existing throttling control technologies is presented, including open-center and load sensing controls. Recent advancements in energy-saving hydraulic technologies, such as individual metering, displacement, and hybrid controls, are briefly summarized. The impact of energy-saving hydraulic technologies on dynamic performance and control solutions are also discussed. Then, the advanced operation methods of multi-actuator mobile machineries are reviewed, including coordinated and haptic controls. Finally, challenges and opportunities of advanced motion control technologies are presented by providing an overall consideration of energy efficiency, controllability, cost, reliability, and other aspects.

Engaging the Learner. Annual Instructional Technology Conference (12th, Murfreesboro, Tennessee, April 1-3, 2007)

ERIC Educational Resources Information Center

Smith, Carter F.; Schneider, Gary F.; Kontos, George; Kuzat, Hanan; Janossy, James; Thurmond, Karen; Moore, Beth; Whitledge, Lynn; Speer, Priscilla; Harber, Annette; Bailey, Kathrine; Penney, Samantha

2007-01-01

The following is a collection of papers presented at the 12th annual Instructional Technology Conference at Middle Tennessee State University in Murfreesboro, Tennessee. This conference is an opportunity for higher-education professionals from across the country to discuss opportunities and challenges presented by instructional technology. The…

Present Challenges, Critical Needs, and Future Technological Directions for NASA's GN and C Engineering Discipline

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.

2010-01-01

The National Aeronautics and Space Administration (NASA) is currently undergoing a substantial redirection. Notable among the changes occurring within NASA is the stated emphasis on technology development, integration, and demonstration. These new changes within the Agency should have a positive impact on the GN&C discipline given the potential for sizeable investments for technology development and in-space demonstrations of both Autonomous Rendezvous & Docking (AR&D) systems and Autonomous Precision Landing (APL) systems. In this paper the NASA Technical Fellow for Guidance, Navigation and Control (GN&C) provides a summary of the present technical challenges, critical needs, and future technological directions for NASA s GN&C engineering discipline. A brief overview of the changes occurring within NASA that are driving a renewed emphasis on technology development will be presented as background. The potential benefits of the planned GN&C technology developments will be highlighted. This paper will provide a GN&C State-of-the-Discipline assessment. The discipline s readiness to support the goals & objectives of each of the four NASA Mission Directorates is evaluated and the technical challenges and barriers currently faced by the discipline are summarized. This paper will also discuss the need for sustained investments to sufficiently mature the several classes of GN&C technologies required to implement NASA crewed exploration and robotic science missions.

Planning for Instructional Technology in the Classroom

ERIC Educational Resources Information Center

Garza Mitchell, Regina L.

2011-01-01

Community colleges are known for keeping abreast of the latest instructional technologies, but the constant and rapid growth of available technology also presents challenges. This chapter reviews the current literature regarding instructional technology usage, with a focus on beneficial applications of technology for teaching and learning, and…

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2016-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies.

Technology and the Transformation of Archival Description

ERIC Educational Resources Information Center

Pitti, Daniel V.

2005-01-01

The emergence of computer and network technologies has presented the archival profession with daunting challenges as well as inspiring opportunities. Archivists have been actively imagining and realizing the application of advanced technologies to their professional functions and activities. Using advanced technologies, archivists have been…

Instructional Technology and Faculty Development.

ERIC Educational Resources Information Center

Holden, Carole A.

This paper explores the challenges instructional technology presents to faculty and administration. For example: students will not accept lectures that fail to draw upon Internet resources; integrating technology sparks the faculty debate that the use of technology will "dehumanize teaching and learning"; community college professors…

Integration and Testing Challenges of Small, Multiple Satellite Missions: Experiences From The Space Technology 5 Project

NASA Technical Reports Server (NTRS)

Sauerwein, Timothy A.; Gostomski, Thomas

2007-01-01

This brief presentation describes the mechanical and electrical integration activities and environmental testing challenges of the Space Technology 5 (ST5) Project. Lessons learned during this process are highlighted, including performing mechanical activities serially to gain efficiency through repetition and performing electrical activities based on the level of subsystem expertise available.

Challenges and Opportunities of Information Technology in the 90s. Track II: Funding and Accountability.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Six papers from the 1990 CAUSE conference's Track II, Challenges and Opportunities of Information Technology in the 90s are presented. The papers focus on daily funding and accountability problems, the related management of growth, and funding relationships in higher education. Papers and their authors are as follows: "Achieving Excellence in…

Education's New Challenge and Choice: Instructional Technology -- Old Byway or Superhighway?

ERIC Educational Resources Information Center

Burke, Joseph C.

1994-01-01

Higher education is trapped in a time warp -- a pre-Gutenberg era where instructional information is mostly transmitted by word of mouth. New information technologies present a critical challenge which cannot be ignored if higher education is to succeed or even survive. Increasingly diverse college students are beginning to think and act like…

An Overview of Science Challenges Pertaining to our Understanding of Extreme Geomagnetically Induced Currents. Chapter 8

NASA Technical Reports Server (NTRS)

Ngwira, Chigomezyo M.; Pulkkinen, Antti A.

2018-01-01

Vulnerability of man-made infrastructure to Earth-directed space weather events is a serious concern for today's technology-dependent society. Space weather-driven geomagnetically induced currents (GICs) can disrupt operation of extended electrically conducting technological systems. The threat of adverse impacts on critical technological infrastructure, like power grids, oil and gas pipelines, and communication networks, has sparked renewed interest in extreme space weather. Because extreme space weather events have low occurrence rate but potentially high impact, this presents a major challenge for our understanding of extreme GIC activity. In this chapter, we discuss some of the key science challenges pertaining to our understanding of extreme events. In addition, we present an overview of GICs including highlights of severe impacts over the last 80 years and recent U.S. Federal actions relevant to this community.

Human Subjects Protection and Technology in Prevention Science: Selected Opportunities and Challenges.

PubMed

Pisani, Anthony R; Wyman, Peter A; Mohr, David C; Perrino, Tatiana; Gallo, Carlos; Villamar, Juan; Kendziora, Kimberly; Howe, George W; Sloboda, Zili; Brown, C Hendricks

2016-08-01

Internet-connected devices are changing the way people live, work, and relate to one another. For prevention scientists, technological advances create opportunities to promote the welfare of human subjects and society. The challenge is to obtain the benefits while minimizing risks. In this article, we use the guiding principles for ethical human subjects research and proposed changes to the Common Rule regulations, as a basis for discussing selected opportunities and challenges that new technologies present for prevention science. The benefits of conducting research with new populations, and at new levels of integration into participants' daily lives, are presented along with five challenges along with technological and other solutions to strengthen the protections that we provide: (1) achieving adequate informed consent with procedures that are acceptable to participants in a digital age; (2) balancing opportunities for rapid development and broad reach, with gaining adequate understanding of population needs; (3) integrating data collection and intervention into participants' lives while minimizing intrusiveness and fatigue; (4) setting appropriate expectations for responding to safety and suicide concerns; and (5) safeguarding newly available streams of sensitive data. Our goal is to promote collaboration between prevention scientists, institutional review boards, and community members to safely and ethically harness advancing technologies to strengthen impact of prevention science.

The ISECG* Global Exploration Roadmap as Context for Robotic and Human Exploration Operations

NASA Technical Reports Server (NTRS)

Lupisella, Mark

2015-01-01

The International Space Exploration Coordination Group (ISECG) Global Exploration Roadmap (GER) provides a broad international context for understanding how robotic missions and robotic assets can enable future human exploration of multiple destinations. This presentation will provide a brief high-level review of the GER with a focus on key robotic missions and robotic assets that can provide enabling technology advancements and that also raise interesting operational challenges in both the near-term and long-term. The GER presently features a variety of robotic missions and robotic assets that can provide important technology advancements as well as operational challenges and improvements, in areas ranging from: (a) leveraging the International Space Station, (b) planetary science robotic missions to potential human destinations, (c) micro-g body proximity operations (e.g. asteroids), (d) autonomous operations, (e) high and low-latency telerobotics, (f) human assisted sample return, and (g) contamination control. This presentation will highlight operational and technology challenges in these areas that have feed forward implications for human exploration.

Oil-Free Shaft Support System Rotordynamics: Past, Present, and Future Challenges and Opportunities

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher

2011-01-01

Recent breakthroughs in Oil-Free technologies have enabled new high-speed rotor systems and turbomachinery. Such technologies can include compliant-surface gas bearings, magnetic bearings, and advanced solid lubricants and tribo-materials. This presentation briefly reviews critical technology developments and the current state-of-the-art, emerging Oil-Free rotor systems and discusses obstacles preventing more widespread use. Key examples of "best practices" for deploying Oil-Free technologies will be presented and remaining major technical questions surrounding Oil-Free technologies will be brought forward.

EUV tools: hydrogen gas purification and recovery strategies

NASA Astrophysics Data System (ADS)

Landoni, Cristian; Succi, Marco; Applegarth, Chuck; Riddle Vogt, Sarah

2015-03-01

The technological challenges that have been overcome to make extreme ultraviolet lithography (EUV) a reality have been enormous1. This vacuum driven technology poses significant purity challenges for the gases employed for purging and cleaning the scanner EUV chamber and source. Hydrogen, nitrogen, argon and ultra-high purity compressed dry air (UHPCDA) are the most common gases utilized at the scanner and source level. Purity requirements are tighter than for previous technology node tools. In addition, specifically for hydrogen, EUV tool users are facing not only gas purity challenges but also the need for safe disposal of the hydrogen at the tool outlet. Recovery, reuse or recycling strategies could mitigate the disposal process and reduce the overall tool cost of operation. This paper will review the types of purification technologies that are currently available to generate high purity hydrogen suitable for EUV applications. Advantages and disadvantages of each purification technology will be presented. Guidelines on how to select the most appropriate technology for each application and experimental conditions will be presented. A discussion of the most common approaches utilized at the facility level to operate EUV tools along with possible hydrogen recovery strategies will also be reported.

Thermoelectric Energy Conversion: Future Directions and Technology Development Needs

NASA Technical Reports Server (NTRS)

Fleurial, Jean-Pierre

2007-01-01

This viewgraph presentation reviews the process of thermoelectric energy conversion along with key technology needs and challenges. The topics include: 1) The Case for Thermoelectrics; 2) Advances in Thermoelectrics: Investment Needed; 3) Current U.S. Investment (FY07); 4) Increasing Thermoelectric Materials Conversion Efficiency Key Science Needs and Challenges; 5) Developing Advanced TE Components & Systems Key Technology Needs and Challenges; 6) Thermoelectrics; 7) 200W Class Lightweight Portable Thermoelectric Generator; 8) Hybrid Absorption Cooling/TE Power Cogeneration System; 9) Major Opportunities in Energy Industry; 10) Automobile Waste Heat Recovery; 11) Thermoelectrics at JPL; 12) Recent Advances at JPL in Thermoelectric Converter Component Technologies; 13) Thermoelectrics Background on Power Generation and Cooling Operational Modes; 14) Thermoelectric Power Generation; and 15) Thermoelectric Cooling.

Governance strategies for living technologies: bridging the gap between stimulating and regulating technoscience.

PubMed

van Est, Rinie; Stemerding, Dirk

2013-01-01

The life sciences present a politically and ethically sensitive area of technology development. NBIC convergence-the convergence of nanotechnology, biotechnology, and information and cognitive technology-presents an increased interaction between the biological and physical sciences. As a result the bio-debate is no longer dominated by biotechnology, but driven by NBIC convergence. NBIC convergence enables two bioengineering megatrends: "biology becoming technology" and "technology becoming biology." The notion of living technologies captures the latter megatrend. Accordingly, living technology presents a politically and ethically sensitive area. This implies that governments sooner or later are faced with the challenge of both promoting and regulating the development of living technology. This article describes four current political models to deal with innovation promotion and risk regulation. Based on two specific developments in the field of living technologies-(psycho)physiological computing and synthetic biology-we reflect on appropriate governance strategies for living technologies. We conclude that recent pleas for anticipatory and deliberative governance tend to neglect the need for anticipatory regulation as a key factor in guiding the development of the life sciences from a societal perspective. In particular, when it is expected that a certain living technology will radically challenge current regulatory systems, one should opt for just such a more active biopolitical approach.

Development Challenges of Game-Changing Entry System Technologies from Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Don; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2015-01-01

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies. Subsystem technologies for robotic and human missions?

"Hedge Your Bets": Technology's Role in Young Gay Men's Relationship Challenges.

PubMed

McKie, Raymond M; Milhausen, Robin R; Lachowsky, Nathan J

2017-01-01

Technology is playing an increasingly pervasive role among young gay men in the process of meeting potential romantic or sexual partners. We investigated challenges posed by technology related to young gay men's relationships. Focus groups (n = 9) of young gay men aged 18-24 (n = 43) were transcribed verbatim, and thematic analysis was used to identify two major themes regarding challenges to relationship development and maintenance. Subthemes include unrealistic expectations of relationships, inauthentic self-presentation online, sexual primacy over romance, increased opportunities for infidelity, and jealousy. The implications of this study for sexual education and sexual health promotion are discussed.

Meeting the challenges of case management with remote patient monitoring technology.

PubMed

Cherry, J C; Colliflower, S J; Tsiperfal, A

2000-01-01

The article presents an overview of some of the current trends in health care and the challenges faced by nurse case managers who are providing disease management services. It discusses some of the emerging technologies available today for innovative case management. In particular, this article describes a program run by a healthcare system in Sacramento, California that uses an Internet-based technology to enhance their nurse case management model. The article demonstrates how the Health Hero platform enables interactive communication between nurse case managers and their patients, thereby meeting some of the challenges the nurse case managers are faced with in the modern disease-management world.

Leadership Under Challenge: Information Technology R&D in a Competitive World. An Assessment of the Federal Networking and Information Technology R&D Program

DTIC Science & Technology

2007-08-01

challenges. The challengers are not only established competitors in Asia and Western Europe but also newcomers such as India and China. Their methods...or regions. Today’s Major Competitors Presently, the three strongest country and regional competitors to the United States are Japan, East Asia ...photography, and their strong position in computer components and office machinery. Education is another advantage. Japan’s universities are the best in Asia

Diplomatic Solutions to Additive Challenges

DTIC Science & Technology

Additive manufacturing (AM) technology, colloquially known as 3D printing , will bring significant benefits to society, but also poses great risks...regimes, are not sufficient to address the challenges presented by 3D printing technology. The DOS should evaluate and promote unconventional strategies...from printed weapons proliferation. Working with other nations to resolve the appropriate balance between development and security, and to promote norms

Another 25 Years of AIED? Challenges and Opportunities for Intelligent Educational Technologies of the Future

ERIC Educational Resources Information Center

Pinkwart, Niels

2016-01-01

This paper attempts an analysis of some current trends and future developments in computer science, education, and educational technology. Based on these trends, two possible future predictions of AIED are presented in the form of a utopian vision and a dystopian vision. A comparison of these two visions leads to seven challenges that AIED might…

Pride and performance: evaluation challenges of a multimedia and information technologies project in remote Aboriginal Australia.

PubMed

Hunter, Ernest; Travers, Helen; Pelham, Steven; Gibson, Julie; Hermawan, Grace; Austin, Corey

2009-08-01

This paper explores an approach to an evaluation challenge: to demonstrate the impact of an initiative drawing on innovative use of information/multimedia technology and performance to address perceived social needs within a disadvantaged, remote Indigenous Australian community. The approach is described and preliminary data are presented supporting the importance of local production and participation.

Robot deployment in long-term care : Case study on using a mobile robot to support physiotherapy.

PubMed

Gerling, K; Hebesberger, D; Dondrup, C; Körtner, T; Hanheide, M

2016-06-01

Healthcare systems in industrialized countries face the challenge of providing care for a growing number of elderly people. Information technology has the possibility of facilitating this process by providing support for nursing staff and improving the well-being of the elderly through a variety of support systems. Little is known about the challenges that arise from the deployment of technology in care settings; however, the integration of technology into care is one of the core determinants of successful support. This article presents the challenges and options associated with the integration of technology into care using the example of a mobile robot to support physiotherapy for elderly people with cognitive impairment in the European project Spatio-Temporal Representations and Activities for Cognitive Control in Long-Term Scenarios (STRANDS). This article presents the technical challenges associated with the introduction of robots in the context of care as well as the perspectives of physiotherapists involved and an overview of information and experiences gained. It is hoped that this will provide useful information for the work of researchers and practitioners wishing to integrate robotic aids into the caregiving process.

Ethical challenges with welfare technology: a review of the literature.

PubMed

Hofmann, Bjørn

2013-06-01

Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

Present challenges in hadrontherapy techniques

NASA Astrophysics Data System (ADS)

Amaldi, U.; Braccini, S.

2011-07-01

Hadrontherapy is a high-precision technique in cancer radiation therapy, which allows obtaining a superior conformal treatment with respect to photons used in conventional radiation therapy. To reach this ambitious goal without reducing the patient throughput needed in a hospital-based environment, the physical and radiobiological properties of charged hadrons, protons and carbon ions in particular, have to be exploited at best, making use of the most modern technologies issued from research in nuclear and particle physics. In the present days, we are assisting to a continuous technological challenge, leading to the conception and to the development of innovative methods and instruments. In this paper, the most relevant challenges in dose delivery systems, gantries, imaging, quality assurance and particle accelerators are reviewed.

In Situ Fabrication Technologies: Meeting the Challenge for Exploration

NASA Technical Reports Server (NTRS)

Howard, Richard W.

2005-01-01

A viewgraph presentation on Lunar and Martian in situ fabrication technologies meeting the challenges for exploration is shown. The topics include: 1) Exploration Vision; 2) Vision Requirements Early in the Program; 3) Vision Requirements Today; 4) Why is ISFR Technology Needed? 5) ISFR and In Situ Resource Utilization (ISRU); 6) Fabrication Feedstock Considerations; 7) Planetary Resource Primer; 8) Average Chemical Element Abundances in Lunar Soil; 9) Chemical Elements in Aerospace Engineering Materials; 10) Schematic of Raw Regolith Processing into Constituent Components; 11) Iron, Aluminum, and Basalt Processing from Separated Elements and Compounds; 12) Space Power Systems; 13) Power Source Applicability; 14) Fabrication Systems Technologies; 15) Repair and Nondestructive Evaluation (NDE); and 16) Habitat Structures. A development overview of Lunar and Martian repair and nondestructive evaluation is also presented.

Principles for fostering the transdisciplinary development of assistive technologies.

PubMed

Boger, Jennifer; Jackson, Piper; Mulvenna, Maurice; Sixsmith, Judith; Sixsmith, Andrew; Mihailidis, Alex; Kontos, Pia; Miller Polgar, Janice; Grigorovich, Alisa; Martin, Suzanne

2017-07-01

Developing useful and usable assistive technologies often presents complex (or "wicked") challenges that require input from multiple disciplines and sectors. Transdisciplinary collaboration can enable holistic understanding of challenges that may lead to innovative, impactful and transformative solutions. This paper presents generalised principles that are intended to foster transdisciplinary assistive technology development. The paper introduces the area of assistive technology design before discussing general aspects of transdisciplinary collaboration followed by an overview of relevant concepts, including approaches, methodologies and frameworks for conducting and evaluating transdisciplinary working and assistive technology design. The principles for transdisciplinary development of assistive technologies are presented and applied post hoc to the COACH project, an ambient-assisted living technology for guiding completion of activities of daily living by older adults with dementia as an illustrative example. Future work includes the refinement and validation of these principles through their application to real-world transdisciplinary assistive technology projects. Implications for rehabilitation Transdisciplinarity encourages a focus on real world 'wicked' problems. A transdisciplinary approach involves transcending disciplinary boundaries and collaborating with interprofessional and community partners (including the technology's intended users) on a shared problem. Transdisciplinarity fosters new ways of thinking about and doing research, development, and implementation, expanding the scope, applicability, and commercial viability of assistive technologies.

Science and Technology in a Conserving Society.

ERIC Educational Resources Information Center

Press, Frank

1979-01-01

The science and technology advisor to the President of the United States presents the challenges facing Americans today in the fields of science and technology. The major topics focused on are people and development, agriculture, biomass and bioconversion, and regulation. (SA)

Evolution of a Federal Policy on Educational Technology.

ERIC Educational Resources Information Center

Blaschke, Charles L.

1998-01-01

Discusses the educational technology policy and funding of the United States Department of Education from the 1960s to the present, including two current programs: the Technology Literacy Challenge Fund and telecommunications educational rate (E-rate) discounts. Future technology initiatives and critical factors impacting the future and are…

Spinoff, 1985

NASA Technical Reports Server (NTRS)

Haggerty, J. J.

1986-01-01

Mainline NASA programs, whose challenging objectives necessitate advances across a diverse scientific/technological spectrum are summarized. A representative selection of spinoff products and processes are presented and the NASA technology from which these transfers are derived, are described. The mechanisms NASA employs to foster technology utilization and stimulate interest among prospective users of the technology are detailed.

Examining the Quality of Technology Implementation in STEM Classrooms: Demonstration of an Evaluative Framework

ERIC Educational Resources Information Center

Parker, Caroline E.; Stylinski, Cathlyn D.; Bonney, Christina R.; Schillaci, Rebecca; McAuliffe, Carla

2015-01-01

Technology applications aligned with science, technology, engineering, and math (STEM) workplace practices can engage students in real-world pursuits but also present dramatic challenges for classroom implementation. We examined the impact of teacher professional development focused on incorporating these workplace technologies in the classroom.…

Planetary Protection Technologies: Technical Challenges for Mars Exploration

NASA Technical Reports Server (NTRS)

Buxbaum, Karen L.

2005-01-01

The search for life in the solar system, using either in situ analysis or sample return, brings with it special technical challenges in the area of planetary protection. Planetary protection (PP) requires planetary explorers to preserve biological and organic conditions for future exploration and to protect the Earth from potential extraterrestrial contamination that could occur as a result of sample return to the Earth-Moon system. In view of the exploration plans before us, the NASA Solar System Exploration Program Roadmap published in May 2003 identified planetary protection as one of 13 technologies for "high priority technology investments." Recent discoveries at Mars and Jupiter, coupled with new policies, have made this planning for planetary protection technology particularly challenging and relevant.New missions to Mars have been formulated, which present significantly greater forward contamination potential. New policies, including the introduction by COSPAR of a Category IVc for planetary protection, have been adopted by COSPAR in response. Some missions may not be feasible without the introduction of new planetary protection technologies. Other missions may be technically possible but planetary protection requirements may be so costly to implement with current technology that they are not affordable. A strategic investment strategy will be needed to focus on technology investments designed to enable future missions and reduce the costs of future missions. This presentation will describe some of the potential technological pathways that may be most protective.

Progress in nanoscale dry processes for fabrication of high-aspect-ratio features: How can we control critical dimension uniformity at the bottom?

NASA Astrophysics Data System (ADS)

Ishikawa, Kenji; Karahashi, Kazuhiro; Ishijima, Tatsuo; Cho, Sung Il; Elliott, Simon; Hausmann, Dennis; Mocuta, Dan; Wilson, Aaron; Kinoshita, Keizo

2018-06-01

In this review, we discuss the progress of emerging dry processes for nanoscale fabrication of high-aspect-ratio features, including emerging design technology for manufacturability. Experts in the fields of plasma processing have contributed to addressing the increasingly challenging demands of nanoscale deposition and etching technologies for high-aspect-ratio features. The discussion of our atomic-scale understanding of physicochemical reactions involving ion bombardment and neutral transport presents the major challenges shared across the plasma science and technology community. Focus is placed on advances in fabrication technology that control surface reactions on three-dimensional features, as well as state-of-the-art techniques used in semiconductor manufacturing with a brief summary of future challenges.

Spacecraft Water Monitoring: Adapting to an Era of Emerging Scientific Challenges

NASA Technical Reports Server (NTRS)

McCoy, J. Torin

2009-01-01

This viewgraph presentation reviews spacecraft water monitoring, and the scientific challenges associated with spacecraft water quality. The contents include: 1) Spacecraft Water 101; 2) Paradigm Shift; and 3) Technology Needs.

Fall prevention intervention technologies: A conceptual framework and survey of the state of the art.

PubMed

Hamm, Julian; Money, Arthur G; Atwal, Anita; Paraskevopoulos, Ioannis

2016-02-01

In recent years, an ever increasing range of technology-based applications have been developed with the goal of assisting in the delivery of more effective and efficient fall prevention interventions. Whilst there have been a number of studies that have surveyed technologies for a particular sub-domain of fall prevention, there is no existing research which surveys the full spectrum of falls prevention interventions and characterises the range of technologies that have augmented this landscape. This study presents a conceptual framework and survey of the state of the art of technology-based fall prevention systems which is derived from a systematic template analysis of studies presented in contemporary research literature. The framework proposes four broad categories of fall prevention intervention system: Pre-fall prevention; Post-fall prevention; Fall injury prevention; Cross-fall prevention. Other categories include, Application type, Technology deployment platform, Information sources, Deployment environment, User interface type, and Collaborative function. After presenting the conceptual framework, a detailed survey of the state of the art is presented as a function of the proposed framework. A number of research challenges emerge as a result of surveying the research literature, which include a need for: new systems that focus on overcoming extrinsic falls risk factors; systems that support the environmental risk assessment process; systems that enable patients and practitioners to develop more collaborative relationships and engage in shared decision making during falls risk assessment and prevention activities. In response to these challenges, recommendations and future research directions are proposed to overcome each respective challenge. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

The Challenges Our Contemporary World Presents to Christian Educators

ERIC Educational Resources Information Center

Schuttloffel, Merylann J.

2005-01-01

This article explores Jacques Ellul's challenges to Christian educators in a society permeated with technique or technological thinking. Responses to the three challenges Ellul puts forth to believing Christians, and, specifically, to Catholic Christian school educators, integrate a process of contemplative practice. This process integrates…

Seal Technology for Hypersonic Vehicle and Propulsion: An Overview

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.

2008-01-01

Hypersonic vehicles and propulsion systems pose an extraordinary challenge for structures and materials. Airframes and engines require lightweight, high-temperature materials and structural configurations that can withstand the extreme environment of hypersonic flight. Some of the challenges posed include very high temperatures, heating of the whole vehicle, steady-state and transient localized heating from shock waves, high aerodynamic loads, high fluctuating pressure loads, potential for severe flutter, vibration, and acoustic loads and erosion. Correspondingly high temperature seals are required to meet these aggressive requirements. This presentation reviews relevant seal technology for both heritage (e.g. Space Shuttle, X-15, and X-38) vehicles and presents several seal case studies aimed at providing lessons learned for future hypersonic vehicle seal development. This presentation also reviews seal technology developed for the National Aerospace Plane propulsion systems and presents several seal case studies aimed at providing lessons learned for future hypersonic propulsion seal development.

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The NASA Centennial Challenges prize, level one, is presented to team Mountaineers for successfully completing level one of the NASA 2014 Sample Return Robot Challenge, from left, Ken Stafford, WPI Challenge technical advisor; Colleen Shaver, WPI Challenge Manager; Ryan Watson, Team Mountaineers; Marvin Cheng, Team Mountaineers; Alexander Hypes, Team Mountaineers; Jarred Strader, Team Mountaineers; Lucas Behrens, Team Mountaineers; Yu Gu, Team Mountaineers; Nick Ohi, Team Mountaineers; Dorothy Rasco, NASA Deputy Associate Administrator for the Space Technology Mission Directorate; Scott Harper, Team Mountaineers; Tanmay Mandal, Team Mountaineers; David Miller, NASA Chief Technologist; Sam Ortega, NASA Program Manager for Centennial Challenges, Saturday, June 14, 2014, at Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Mountaineers was the only team to complete the level one challenge. During the competition, teams were required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge was to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

How Technology Affects Teaching.

ERIC Educational Resources Information Center

Wiske, Martha Stone; And Others

This study presents composite profiles of teachers who were interviewed in order to assess how they are being affected by the challenges and opportunities presented by computer technology use. In-depth interviews were held with 76 teachers from 10 sites around the country, and the interview data were analyzed to identify themes and to construct…

Teaching with Social Media: Disrupting Present Day Public Education

ERIC Educational Resources Information Center

Meabon Bartow, Susan

2014-01-01

Because social technologies present illuminating educational, ethical, economic, and structural challenges to existing constructions of public education, they catalyze a fundamental examination of what public education should look like and be like in a democracy. Given their performances in other arenas, mobile and electronic technologies have the…

Powerful Presentations with PowerPoint.

ERIC Educational Resources Information Center

Schenone-Stevens, M. Carla

As educational institutions prepare to meet the challenges of the new millennium, it becomes more apparent that computer-competent students should be graduated to meet the needs of the advances in technology in the workplace. One technology that is readily available is presentation software, which allows the student to generate slides, overheads,…

The role of advanced sensing in smart cities.

PubMed

Hancke, Gerhard P; Silva, Bruno de Carvalho E; Hancke, Gerhard P

2012-12-27

In a world where resources are scarce and urban areas consume the vast majority of these resources, it is vital to make cities greener and more sustainable. Advanced systems to improve and automate processes within a city will play a leading role in smart cities. From smart design of buildings, which capture rain water for later use, to intelligent control systems, which can monitor infrastructures autonomously, the possible improvements enabled by sensing technologies are immense. Ubiquitous sensing poses numerous challenges, which are of a technological or social nature. This paper presents an overview of the state of the art with regards to sensing in smart cities. Topics include sensing applications in smart cities, sensing platforms and technical challenges associated with these technologies. In an effort to provide a holistic view of how sensing technologies play a role in smart cities, a range of applications and technical challenges associated with these applications are discussed. As some of these applications and technologies belong to different disciplines, the material presented in this paper attempts to bridge these to provide a broad overview, which can be of help to researchers and developers in understanding how advanced sensing can play a role in smart cities.

The Role of Advanced Sensing in Smart Cities

PubMed Central

Hancke, Gerhard P.; de Carvalho e Silva, Bruno; Hancke, Gerhard P.

2013-01-01

In a world where resources are scarce and urban areas consume the vast majority of these resources, it is vital to make cities greener and more sustainable. Advanced systems to improve and automate processes within a city will play a leading role in smart cities. From smart design of buildings, which capture rain water for later use, to intelligent control systems, which can monitor infrastructures autonomously, the possible improvements enabled by sensing technologies are immense. Ubiquitous sensing poses numerous challenges, which are of a technological or social nature. This paper presents an overview of the state of the art with regards to sensing in smart cities. Topics include sensing applications in smart cities, sensing platforms and technical challenges associated with these technologies. In an effort to provide a holistic view of how sensing technologies play a role in smart cities, a range of applications and technical challenges associated with these applications are discussed. As some of these applications and technologies belong to different disciplines, the material presented in this paper attempts to bridge these to provide a broad overview, which can be of help to researchers and developers in understanding how advanced sensing can play a role in smart cities. PMID:23271603

A Model of Leadership in Integrating Educational Technology in Higher Education

ERIC Educational Resources Information Center

Markova, Mariya

2014-01-01

The potential impacts and implications of technology on the professional lives of instructors in higher education, and the role of leadership in integrating educational technology, present a variety of complexities and challenges. The purpose of this paper is to identify the reasons why faculty members are not fully embracing technology and what…

Revisiting Teacher Preparation: Responding to Technology Transience in the Educational Setting

ERIC Educational Resources Information Center

Muilenburg, Lin Y.; Berge, Zane L.

2015-01-01

People in society have managed to survive and, often, thrive in a world characterized by ever-increasing technological change. Yet technological transience causes or at least exacerbates challenges faced by teachers and teacher education programs when using technology for educational purposes. This article presents frameworks used to assist in the…

Challenges and Opportunities of Information Technology in the 90s. Track VII: Managing Applications and Technology.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Seven papers from the 1990 CAUSE Conference Track VII: Managing Applications and Technology are presented. Authors describe how colleges and universities are incorporating emerging technologies into their campus environments: hardware; software; and procedural techniques. Papers and their authors are as follows: "The Iowa Student Information…

Reforming system of professional training of future specialists by taking into account production automation requirements

NASA Astrophysics Data System (ADS)

Saigushev, N. Y.; Vedeneeva, O. A.; Melekhova, Yu B.

2018-05-01

The accelerating scientific development, equipment upgrade, emergence of new technologies and intensive growth and use of nano-, robotic, bio- and other perspective technologies require the formation of scientific and technological potential in Russia which is suitable for present-day challenges of the global technological growth.

Technology, Policy, and School Change: The Role of Intermediary Organizations

ERIC Educational Resources Information Center

Forthe, Darrell

2012-01-01

As educators work to advance 21st century teaching and learning in schools, numerous reforms are needed but none greater than the necessity to integrate technology. Technology integration presents complex challenges because numerous changes must take place. The National Education Technology Plan 2010 (NETP) provides a road map for these necessary…

Performance Evaluation Methods for Assistive Robotic Technology

NASA Astrophysics Data System (ADS)

Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

Themed Learning with Music and Technology

ERIC Educational Resources Information Center

Smarkusky, Debra L.; Toman, Sharon A.

2016-01-01

Interdisciplinary teaching and interpretation of technology for various applications provides a challenging and engaging environment for students to enhance their creativity, critical thinking and problem-solving skills. This paper presents results of a joint effort between faculty in the Department of Information Sciences and Technology and the…

Designing Nordic Technology-Enhanced Learning

ERIC Educational Resources Information Center

Cerratto-Pargman, Teresa; Jarvela, Sanna M.; Milrad, Marcelo

2012-01-01

The latest developments of information and communication technologies (ICT) and its large penetration in different sectors of our society pose new challenges and demands in the field of education. This special issue entitled "Designing Nordic technology-enhanced learning (TEL)", presents and discusses how researchers in the Nordic…

Technology Transformation

ERIC Educational Resources Information Center

Scott, Heather; McGilll, Toria

2011-01-01

Social networking and other technologies, if used judiciously, present the means to integrate 21st century skills into the classroom curriculum. But they also introduce challenges that educators must overcome. Increased concerns about plagiarism and access to technology can test educators' creativity and school resources. Air Academy High School,…

NASA Activities as they Relate to Microwave Technology for Aerospace Communications Systems

NASA Technical Reports Server (NTRS)

Miranda, Felix A.

2011-01-01

This presentation discusses current NASA activities and plans as they relate to microwave technology for aerospace communications. The presentations discusses some examples of the aforementioned technology within the context of the existing and future communications architectures and technology development roadmaps. Examples of the evolution of key technology from idea to deployment are provided as well as the challenges that lay ahead regarding advancing microwave technology to ensure that future NASA missions are not constrained by lack of communication or navigation capabilities. The presentation closes with some examples of emerging ongoing opportunities for establishing collaborative efforts between NASA, Industry, and Academia to encourage the development, demonstration and insertion of communications technology in pertinent aerospace systems.

Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures

NASA Astrophysics Data System (ADS)

Meschut, G.; Janzen, V.; Olfermann, T.

2014-05-01

Driven by increasing costs for energy and raw material and especially by the European CO2-emission laws, automotive industry faces the challenge to develop more lightweight and at the same time still rigid and crash-stable car bodies, that are affordable for large-scale production. The implementation of weight-reduced constructions depends not only on the availability of lightweight materials and related forming technologies, but also on cost-efficient and reliable joining technologies suitable for multi-material design. This article discusses the challenges and requirements for these technologies, based on the example of joining aluminium with press-hardened boron steels, what is considered as a very important material combination for affordable future lightweight mobility. Besides a presentation of recent developments for extending the process limits of conventional mechanical joining methods, new promising technologies such as resistance element welding are introduced. In addition, the performance, advantages, and disadvantages of the presented technologies are compared and discussed.

Comparison of Traditional and Innovative Techniques to Solve Technical Challenges

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2011-01-01

This slide presentation reviews the use of traditional and innovative techniques to solve technical challenges in food storage technology. The planning for a mission to Mars is underway, and the food storage technology improvements requires that improvements be made. This new technology is required, because current food storage technology is inadequate,refrigerators or freezers are not available for food preservation, and that a shelf life of 5 years is expected. A 10 year effort to improve food packaging technology has not enhanced significantly food packaging capabilities. Two innovation techniques were attempted InnoCentive and Yet2.com and have provided good results, and are still under due diligence for solver verification.

The Ethical, Legal, and Social Issues Impacted by Modern Assisted Reproductive Technologies

PubMed Central

Brezina, Paul R.; Zhao, Yulian

2012-01-01

Background. While assisted reproductive technology (ART), including in vitro fertilization has given hope to millions of couples suffering from infertility, it has also introduced countless ethical, legal, and social challenges. The objective of this paper is to identify the aspects of ART that are most relevant to present-day society and discuss the multiple ethical, legal, and social challenges inherent to this technology. Scope of Review. This paper evaluates some of the most visible and challenging topics in the field of ART and outlines the ethical, legal, and social challenges they introduce. Major Conclusions. ART has resulted in a tectonic shift in the way physicians and the general population perceive infertility and ethics. In the coming years, advancing technology is likely to exacerbate ethical, legal, and social concerns associated with ART. ART is directly challenging society to reevaluate the way in which human life, social justice and equality, and claims to genetic offspring are viewed. Furthermore, these issues will force legal systems to modify existing laws to accommodate the unique challenges created by ART. Society has a responsibility to ensure that the advances achieved through ART are implemented in a socially responsible manner. PMID:22272208

Radiation Testing, Characterization and Qualification Challenges for Modern Microelectronics and Photonics Devices and Technologies

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2008-01-01

At an earlier conference we discussed a selection of the challenges for radiation testing of modern semiconductor devices focusing on state-of-the-art CMOS technologies. In this presentation, we extend this discussion focusing on the following areas: (1) Device packaging, (2) Evolving physical single even upset mechanisms, (3) Device complexity, and (4) the goal of understanding the limitations and interpretation of radiation testing results.

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies

PubMed Central

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well. PMID:27350984

Forward Osmosis in India: Status and Comparison with Other Desalination Technologies.

PubMed

Mehta, Dhruv; Gupta, Lovleen; Dhingra, Rijul

2014-01-01

With an increase in demand of freshwater and depleting water sources, it is imperative to switch to seawater as a regular source of water supply. However, due to the high total dissolved solid content, it has to be desalinated to make it drinkable. While desalination technologies have been used for many years, mass deployment of such technologies poses a number of challenges like high energy requirements as well as high negative environmental impact through side products and CO2 emissions. The purpose of this paper is to present a sustainable technology for desalination. Forward osmosis, an emerging technology, is compared with the other commonly used technologies worldwide, namely, multieffect distillation, multistage flash distillation, and reverse osmosis as well as other emerging technologies like vapour compression, solar humidification dehumidification, nanofiltration, and freezing desalination. As energy consumption and associated greenhouse gas emissions are one of the major concerns of desalination, this paper concludes that forward osmosis is an emerging sustainable technology for seawater desalination. This paper then presents the challenges involved in the application of forward osmosis in India and presents a plant setup. In the end, the cost comparison of a forward osmosis and reverse osmosis plant has been done and it was concluded that forward osmosis is economically better as well.

A review on organic waste to energy systems in India.

PubMed

Dhar, Hiya; Kumar, Sunil; Kumar, Rakesh

2017-12-01

Waste generation is increasing day-by-day with the growth of population which directly affects the environment and economy. Organic municipal solid waste (MSW) and agriculture sectors contribute towards maximum waste generation in India. Thus, management of organic waste is very much essential with the increasing demand for energy. The present paper mainly focusses on reviewing waste to energy (WtE) potentials, its technologies, and the associated challenges. Different substrates are utilized through various technological options in India. Organic waste has good potential to attain sustainable energy yields with and without affecting the environment. A realistic scenario of WtE technologies and their challenges in line with the existing Indian condition is presented in this paper. Copyright © 2017 Elsevier Ltd. All rights reserved.

Aquaponics and Hydroponics on a Budget

ERIC Educational Resources Information Center

Johanson, Erik K.

2009-01-01

In response to the publication of the "Standards for Technological Literacy" by the International Technology Education Association (ITEA), technology education teachers have scrambled to add biotechnology-related components to the curriculum. This can present a particular challenge in terms of funding. In this article, the author details on a…

First Thin Film Festival

NASA Astrophysics Data System (ADS)

Samson, Philippe

2005-05-01

The constant evolution of the satellite market is asking for better technical performances and reliability for a reduced cost. Solar array is in front line of this challenge.This can be achieved by present technologies progressive improvement in cost reduction or by technological breakthrough.To reach an effective End Of Live performance100 W/kg of solar array is not so easy, even if you suppose that the mass of everything is nothing!Thin film cells are potential candidate to contribute to this challenge with certain confidence level and consequent development plan validation and qualification on ground and flight.Based on a strong flight heritage in flexible Solar Array design, the work has allowed in these last years, to pave the way on road map of thin film technologies . This is encouraged by ESA on many technological contracts put in concurrent engineering.CISG was selected cell and their strategy of design, contributions and results will be presented.Trade-off results and Design to Cost solutions will discussed.Main technical drivers, system design constraints, market access, key technologies needed will be detailed in this paper and the resulting road-map and development plan will be presented.

Robot Design Challenge: This Design Challenge Is a Mirror on the World

ERIC Educational Resources Information Center

Roman, Harry T.

2004-01-01

A fun design challenge that can be used in the classroom and across the grades is presented in this article. No special tools, hardware, or supplies are needed, only imagination and teamwork. It is a fun exercise that illustrates technology education principles. This design challenge is a mirror on the world, very similar to how projects are…

Telecommunications: Opportunities in the emerging technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultheis, R.W.

1994-12-31

A series of slides present opportunities for Utility Telecommunications. The following aspects are covered: (1) Technology in a period of revolution; (2) Technology Management by the Energy Utility, (3) Contemporary Telecommunication Network Architectures, (4) Opportunity Management, (5) Strategic Planning for Profits and Growth, (6) Energy Industry in a period of challenge. Management topics and applications are presented in a matrix for generation, transmission, distribution, customer service and new business revenue growth subjects.

Non-Volatile Memory Technology Symposium 2000: Proceedings

NASA Technical Reports Server (NTRS)

Aranki, Nazeeh (Editor)

2000-01-01

This publication contains the proceedings for the Non-Volatile Memory Technology Symposium 2000 that was held on November 15-16, 2000 in Arlington, Virginia. The proceedings contains a wide range of papers that cover the presentations of myriad advances in the nonvolatile memory technology during the recent past including memory cell design, simulations, radiation environment, and emerging memory technologies. The papers presented in the proceedings address the design challenges and applications and deals with newer, emerging memory technologies as well as related issues of radiation environment and die packaging.

Psychosocial Interventions for Patients and Caregivers in the Age of New Communication Technologies: Opportunities and Challenges in Cancer Care

PubMed Central

BADR, HODA; CARMACK, CINDY L.; DIEFENBACH, MICHAEL A.

2014-01-01

Interactive health communication technologies (IHCTs) present a new opportunity and challenge for cancer control researchers who focus on couple and family-based psychosocial interventions. In this article we first present findings from a systematic review of eight studies that utilized IHCTs in psychosocial interventions with cancer patients and their caregivers. Although this research area is still in its infancy, studies suggest that it is feasible to incorporate IHCTs in such interventions, that IHCTs are generally well-accepted by patients and caregivers, and that the choice of technology is largely dependent on intervention target (i.e., patient, caregiver, or both) and outcomes (e.g., decision-making, symptom management, lifestyle behaviors). A major research gap has been the lack of integration of Web 2.0 technologies (e.g., social media), despite the fact that social support and communication are frequently targeted components of interventions that involve cancer patients and their caregivers. Given this, we next present findings from a qualitative study that we conducted to describe the different needs and preferences of 13 cancer survivors and 12 caregivers with regard to social media use. Finally, we discuss some of the opportunities and challenges of using IHCTs in psychosocial interventions for cancer patients and their caregivers and propose directions for future research. PMID:25629218

A Focus on "Hands-On," Learner-Centered Technology at The Citadel

ERIC Educational Resources Information Center

DeRoma, Virginia; Nida, Steve

2004-01-01

While advances in technology have enhanced the quality and variety of visual presentations in teaching, most instructors find themselves teaching to a generation of students who are difficult to dazzle. Although the innovative use of technology in and outside of the classroom is a challenge, selecting practices that optimize technology as a tool…

Channeling the Innovation Stream: A Decision Framework for Selecting Emerging Technologies

ERIC Educational Resources Information Center

Sauer, Philip S.

2010-01-01

The proliferation of emerging technologies offers opportunity but also presents challenges to defense acquisition decision makers seeking to incorporate those technologies as part of the acquisition process. Assessment frameworks and methodologies found in the literature typically address the primary focus of a sponsoring organization's interest…

Revolutionizing Arts Education in K-12 Classrooms through Technological Integration

ERIC Educational Resources Information Center

Lemon, Narelle, Ed.

2015-01-01

Educational technologies are becoming more commonplace across the K-12 curriculum. In particular, the use of innovative digital technology is expanding the potential of arts education, presenting new opportunities--and challenges--to both curricular design and pedagogical practice. "Revolutionizing Arts Education in K-12 Classrooms through…

"Egg Races" and Other Practical Challenges

ERIC Educational Resources Information Center

Auty, Geoff

2013-01-01

This article presents ideas behind science and technology challenges and shares experiences of "egg races." Different challenges were set, but there was always the need to transport an egg across some obstacle course without breaking it. It was so popular in the 1980s that the term "egg race" came to mean any kind of simple…

IT Challenges for Space Medicine

NASA Technical Reports Server (NTRS)

Johnson-Throop, Kathy

2010-01-01

This viewgraph presentation reviews the various Information Technology challenges for aerospace medicine. The contents include: 1) Space Medicine Activities; 2) Private Medical Information; 3) Lifetime Surveillance of Astronaut Health; 4) Mission Medical Support; 5) Data Repositories for Research; 6) Data Input and Output; 7) Finding Data/Information; 8) Summary of Challenges; and 9) Solutions and questions.

Whatever Floats Your Boat: A Design Challenge

ERIC Educational Resources Information Center

Kornoelje, Joanne; Roman, Harry T.

2012-01-01

This article presents a simple design challenge, based on the PBS program "Design Squad's" "Watercraft" activity that will prove engaging to most technology and engineering students. In this floating boat challenge, students are to build a boat that can float and support 25 pennies for at least 10 seconds--without leaking, sinking, or tipping…

Building a Solar System Internet

NASA Technical Reports Server (NTRS)

Clark, Gilbert J.

2018-01-01

This presentation is expected to be given during the scheduled Communications Technology and Development discussion in the University Student Design Challenge (2). It is an introduction to various challenges inherent to the construction of networks in space. The presentation also includes both an overview of networking in general, as well as approaches taken to the construction of delay- and disruption- tolerant networks.

"What Goes Around Comes Around": Lessons Learned from Economic Evaluations of Personalized Medicine Applied to Digital Medicine.

PubMed

Phillips, Kathryn A; Douglas, Michael P; Trosman, Julia R; Marshall, Deborah A

2017-01-01

The growth of "big data" and the emphasis on patient-centered health care have led to the increasing use of two key technologies: personalized medicine and digital medicine. For these technologies to move into mainstream health care and be reimbursed by insurers, it will be essential to have evidence that their benefits provide reasonable value relative to their costs. These technologies, however, have complex characteristics that present challenges to the assessment of their economic value. Previous studies have identified the challenges for personalized medicine and thus this work informs the more nascent topic of digital medicine. To examine the methodological challenges and future opportunities for assessing the economic value of digital medicine, using personalized medicine as a comparison. We focused specifically on digital biomarker technologies and multigene tests. We identified similarities in these technologies that can present challenges to economic evaluation: multiple results, results with different types of utilities, secondary findings, downstream impact (including on family members), and interactive effects. Using a structured review, we found that there are few economic evaluations of digital biomarker technologies, with limited results. We conclude that more evidence on the effectiveness of digital medicine will be needed but that the experiences with personalized medicine can inform what data will be needed and how such analyses can be conducted. Our study points out the critical need for typologies and terminology for digital medicine technologies that would enable them to be classified in ways that will facilitate research on their effectiveness and value. Copyright © 2017 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Current status and challenges for automotive battery production technologies

NASA Astrophysics Data System (ADS)

Kwade, Arno; Haselrieder, Wolfgang; Leithoff, Ruben; Modlinger, Armin; Dietrich, Franz; Droeder, Klaus

2018-04-01

Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.

The State of Doctoral Education in Social Sciences in Uganda: Experiences and Challenges of Doctoral Training at Mbarara University of Science and Technology 2003-2010

ERIC Educational Resources Information Center

Muriisa, Roberts Kabeba

2015-01-01

This paper discusses the challenges and experiences which social science students in Africa undergo to complete the PhD program. Focusing on Mbarara University of Science and Technology, the paper present that many students who register on the PhD program in Africa, are unable to complete the program in the stipulated time. The paper identifies…

Remediation Technology Collaboration Development

NASA Technical Reports Server (NTRS)

Mahoney, John; Olsen, Wade

2010-01-01

This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

Making Science Work.

ERIC Educational Resources Information Center

Thomas, Lewis

1981-01-01

Presents a viewpoint concerning the impact of recent scientific advances on society. Discusses biological discoveries, space exploration, computer technology, development of new astronomical theories, the behavioral sciences, and basic research. Challenges to keeping science current with technological advancement are also discussed. (DS)

2014 NASA Centennial Challenges Sample Return Robot Challenge

NASA Image and Video Library

2014-06-14

The NASA Centennial Challenges prize, level one, is presented to team Mountaineers for successfully completing level one of the NASA 2014 Sample Return Robot Challenge, from left, Ryan Watson, Team Mountaineers; Lucas Behrens, Team Mountaineers; Jarred Strader, Team Mountaineers; Yu Gu, Team Mountaineers; Scott Harper, Team Mountaineers; Dorothy Rasco, NASA Deputy Associate Administrator for the Space Technology Mission Directorate; Laurie Leshin, Worcester Polytechnic Institute (WPI) President; David Miller, NASA Chief Technologist; Alexander Hypes, Team Mountaineers; Nick Ohi,Team Mountaineers; Marvin Cheng, Team Mountaineers; Sam Ortega, NASA Program Manager for Centennial Challenges; and Tanmay Mandal, Team Mountaineers;, Saturday, June 14, 2014, at Worcester Polytechnic Institute (WPI) in Worcester, Mass. Team Mountaineers was the only team to complete the level one challenge. During the competition, teams were required to demonstrate autonomous robots that can locate and collect samples from a wide and varied terrain, operating without human control. The objective of this NASA-WPI Centennial Challenge was to encourage innovations in autonomous navigation and robotics technologies. Innovations stemming from the challenge may improve NASA's capability to explore a variety of destinations in space, as well as enhance the nation's robotic technology for use in industries and applications on Earth. Photo Credit: (NASA/Joel Kowsky)

Emerging Technologies and MOUT

DOE Office of Scientific and Technical Information (OSTI.GOV)

YONAS,GEROLD; MOY,TIMOTHY DAVID

Operating in a potentially hostile city is every soldier's nightmare. The staggering complexity of the urban environment means that deadly threats--or non-combatants-may lurk behind every corner, doorway, or window. Urban operations present an almost unparalleled challenge to the modern professional military. The complexity of urban operations is further amplified by the diversity of missions that the military will be called upon to conduct in urban terrain. Peace-making and peace-keeping missions, urban raids to seize airports or WMD sites or to rescue hostages, and extended urban combat operations all present different sorts of challenges for planners and troops on the ground.more » Technology almost never serves as a magic bullet, and past predictions of technological miracles pile high on the ash heap of history. At the same time, it is a vital element of planning in the modern age to consider and, if possible, take advantage of emerging technologies. We believe that technologies can assist military operations in urbanized terrain (MOUT) in three primary areas, which are discussed.« less

Robust Joining and Assembly Technologies for Ceramic Matrix Composites: Technical Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Mrityunjay, Singh; Gray, Hugh R. (Technical Monitor)

2002-01-01

Fiber reinforced ceramic matrix composites are under active consideration for use in a wide variety of high temperature applications within the aeronautics, energy, process, and nuclear industries. The engineering designs require fabrication and manufacturing of complex shaped parts. In many instances, it is more economical to build up complex shapes by Joining simple geometrical shapes. Thus, joining and attachment have been recognized as enabling technologies for successful utilization of ceramic components in various demanding applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of high temperature joints in ceramic matrix composites will be presented. Various joint design philosophies and design issues in joining of composites will be discussed along with an affordable, robust ceramic joining technology (ARCJoinT). A wide variety of ceramic composites, in different shapes and sizes, have been joined using this technology. Microstructure and mechanical properties of joints will be reported. Current status of various ceramic joining technologies and future prospects for their applications will also be discussed.

Radiation Test Challenges for Scaled Commerical Memories

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Ladbury, Ray L.; Cohn, Lewis M.; Oldham, Timothy

2007-01-01

As sub-100nm CMOS technologies gather interest, the radiation effects performance of these technologies provide a significant challenge. In this talk, we shall discuss the radiation testing challenges as related to commercial memory devices. The focus will be on complex test and failure modes emerging in state-of-the-art Flash non-volatile memories (NVMs) and synchronous dynamic random access memories (SDRAMs), which are volatile. Due to their very high bit density, these device types are highly desirable for use in the natural space environment. In this presentation, we shall discuss these devices with emphasis on considerations for test and qualification methods required.

Heatshield for Extreme Entry Environment Technology (HEEET)

NASA Technical Reports Server (NTRS)

Venkatapathy, E.; Ellerby, D.; Stackpoole, M..; Peterson, K.; Gage, P.; Beerman, A.; Blosser, M.; Chinnapongse, R.; Dillman, R.; Feldman, J.;

Bridging Differences -- how Social Relationships and Racial Diversity Matter in a Girls' Technology Program

NASA Astrophysics Data System (ADS)

Kekelis, Linda S.; Ancheta, Rebecca Wepsic; Heber, Etta; Countryman, Jeri

In this article, we explore an understudied dimension of girls' single-sex education - how social relationships and racial diversity impact the educational environment for girls, and how teachers may best address these concerns. Findings are presented from a 3-year qualitative study of girls' experiences in a single-sex technology program. Girls valued the all-girls aspect of the programs, and friendships formed the foundation of their social experiences. Girls' friendship groups influenced their experiences and eventually their success in the after school technology programs. When friendship groups were observed to be racially homogeneous, they created challenges for including and supporting a racially diverse student membership. Our responses to the challenges that cultural differences and tensions present are outlined, along with recommendations for helping girls bridge these differences.

Connected Building Challenge – Seattle Demonstration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Nora; Khamphanchai, Warodom; Chotibhongs, Tony

2016-11-07

PNNL's first-ever innovation challenge invited teams to leverage PNNL's VOLTTRON technology to create solutions that advance the growth of the smart building market. Five teams presented their solutions at Seattle's Smart Buildings Center in early August 2016. This video summarizes the event.

Advanced energy storage for space applications: A follow-up

NASA Technical Reports Server (NTRS)

Halpert, Gerald; Surampudi, Subbarao

1994-01-01

Viewgraphs on advanced energy storage for space applications are presented. Topics covered include: categories of space missions using batteries; battery challenges; properties of SOA and advanced primary batteries; lithium primary cell applications; advanced rechargeable battery applications; present limitations of advanced battery technologies; and status of Li-TiS2, Ni-MH, and Na-NiCl2 cell technologies.

Nanoelectronics and More-than-Moore at IMEC

NASA Astrophysics Data System (ADS)

Cartuyvels, Rudi; Biesemans, Serge; Vandervorst, Wilfried; De Boeck, Jo

2011-11-01

This paper presents an overview of imec's R&D addressing the challenges of CMOS scaling towards the 10 nm node and its outlook beyond. In addition to the relentless geometrical shrinks, opportunities to further increase nanoelectronic system functionality and performance by co-integration and chip stacking technologies combined with emerging MEMS and optoelectronic technologies will be presented.

A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges.

PubMed

Hannan, M A; Abdulla Al Mamun, Md; Hussain, Aini; Basri, Hassan; Begum, R A

2015-09-01

In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challenges towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system. Copyright © 2015 Elsevier Ltd. All rights reserved.

Readiness levels for spacecraft information technologies

NASA Technical Reports Server (NTRS)

Mackey, R.; Some, R.; Aljabri, A.

2003-01-01

Presented in this paper is a modified interpretation of the traditional TRLs aimed solely at information technology. The intent of this new set of definitions is twofold: First, to enable a definitive measurement of progress among developing information technologies for spacecraft; and second, to clarify particular challenges and requirements that must be met as these technologies are validated in increasingly realistic environments.

Teaching, Learning, & Technology: The Challenge Continues. Proceedings of the Annual Mid-South Instructional Technology Conference (8th, Murfreesboro, Tennessee, March 30-April 1, 2003).

ERIC Educational Resources Information Center

Middle Tennessee State Univ., Murfreesboro.

This proceedings of the eight annual Mid-South Instructional Technology Conference: Teaching, Learning, & Technology contains the following selected presentations: "Design and Implementation of a Multimedia CD-ROM-Based Directed Study Preservice Teacher Education Course" (Timothy Morse); "Effective IT Integration in the Composition Classroom:…

Radiation Testing, Characterization and Qualification Challenges for Modern Microelectronics and Photonics Devices and Technologies

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2008-01-01

At GOMAC 2007, we discussed a selection of the challenges for radiation testing of modern semiconductor devices focusing on state-of-the-art memory technologies. This included FLASH non-volatile memories (NVMs) and synchronous dynamic random access memories (SDRAMs). In this presentation, we extend this discussion in device packaging and complexity as well as single event upset (SEU) mechanisms using several technology areas as examples including: system-on-a-chip (SOC) devices and photonic or fiber optic systems. The underlying goal is intended to provoke thought for understanding the limitations and interpretation of radiation testing results.

Implementation of workflow engine technology to deliver basic clinical decision support functionality.

PubMed

Huser, Vojtech; Rasmussen, Luke V; Oberg, Ryan; Starren, Justin B

2011-04-10

Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. We describe an implementation of a free workflow technology software suite (available at http://code.google.com/p/healthflow) and its application in the domain of clinical decision support. Our implementation seamlessly supports clinical logic testing on retrospective data and offers a user-friendly knowledge representation paradigm. With the presented software implementation, we demonstrate that workflow engine technology can provide a decision support platform which evaluates well against an established clinical decision support architecture evaluation framework. Due to cross-industry usage of workflow engine technology, we can expect significant future functionality enhancements that will further improve the technology's capacity to serve as a clinical decision support platform.

Green Propulsion Technologies for Advanced Air Transports

NASA Technical Reports Server (NTRS)

Del Rosario, Ruben

2015-01-01

Air transportation is critical to U.S. and Global economic vitality. However, energy and climate issues challenge aviations ability to be sustainable in the long term. Aviation must dramatically reduce fuel use and related emissions. Energy costs to U.S. airlines nearly tripled between 1995 and 2011, and continue to be the highest percentage of operating costs. The NASA Advanced Air Transports Technology Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the NASA vision of revolutionary systems and propulsion technologies needed to achieve these challenging goals. Specifically, the primary focus is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe, which are envisioned as being powered by Hybrid Electric Propulsion Systems.

Green Propulsion Technologies for Advanced Air Transports

NASA Technical Reports Server (NTRS)

Del Rosario, Ruben

2015-01-01

Air transportation is critical to U.S. and Global economic vitality. However, energy and climate issues challenge aviation's ability to be sustainable in the long term. Aviation must dramatically reduce fuel use and related emissions. Energy costs to U.S. airlines nearly tripled between 1995 and 2011, and continue to be the highest percentage of operating costs. The NASA Advanced Air Transports Technology Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the NASA vision of revolutionary systems and propulsion technologies needed to achieve these challenging goals. Specifically, the primary focus is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

Hydrogen storage and fuel cells

NASA Astrophysics Data System (ADS)

Liu, Di-Jia

2018-01-01

Global warming and future energy supply are two major challenges facing American public today. To overcome such challenges, it is imperative to maximize the existing fuel utilization with new conversion technologies while exploring alternative energy sources with minimal environmental impact. Hydrogen fuel cell represents a next-generation energy-efficient technology in transportation and stationary power productions. In this presentation, a brief overview of the current technology status of on-board hydrogen storage and polymer electrolyte membrane fuel cell in transportation will be provided. The directions of the future researches in these technological fields, including a recent "big idea" of "H2@Scale" currently developed at the U. S. Department of Energy, will also be discussed.

Workshop on Advanced Technologies for Planetary Instruments, part 1

NASA Technical Reports Server (NTRS)

Appleby, John F. (Editor)

1993-01-01

This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. This volume contains papers presented at the Workshop on Advanced Technologies for Planetary Instruments on 28-30 Apr. 1993. This meeting was conceived in response to new challenges facing NASA's robotic solar system exploration program. Over the past several years, SDIO has sponsored a significant technology development program aimed, in part, at the production of instruments with these characteristics. This workshop provided an opportunity for specialists from the planetary science and DoD communities to establish contacts, to explore common technical ground in an open forum, and more specifically, to discuss the applicability of SDIO's technology base to planetary science instruments.

NASA Fixed Wing Project: Green Technologies for Future Aircraft Generation

NASA Technical Reports Server (NTRS)

DelRosario, Ruben

2014-01-01

The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advances in multidisciplinary technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the FW Project vision of revolutionary systems and technologies needed to achieve the challenging goals of aviation. Specifically, the primary focus of the FW Project is on the N+3 generation that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

Technology Utilisation in Elementary Schools in Turkey's Capital: A Case Study

ERIC Educational Resources Information Center

Karaca, Feride; Can, Gulfidan; Yildirim, Soner

2013-01-01

A case study was conducted to explore teachers' current technology use in elementary schools in Ankara, the capital of Turkey. The data were collected through a survey, and participants included 1030 classroom teachers across eight districts. The present study results revealed that significant challenges remain with regard to technology use in the…

Today's University Students and Their Need to Connect

ERIC Educational Resources Information Center

Russo, Theresa J.; Fallon, Moira A.; Zhang, Jie; Acevedo, Veronica C.

2014-01-01

Higher education is rapidly changing and university instructors are presented with new types of students for whom technology is a significant influence. They perceive technology as a way of life and express a need to feel connected at all times. With increasingly diverse university classroom, technology integration is both a challenge and an…

Home - Energy Innovation Portal

Science.gov Websites

tree sapling with a single leaf. Browse 1,225 Technology Marketing Summaries Graphic of a small tree . Learn about 17 Success Stories More Features API API Get technology info via a web service. EERE officials present the Clean Energy Challenge award to a young entrepreneur. EERE Technology-to-Market Visit

The University in Periods of Technological Change: A Historically Grounded Perspective

ERIC Educational Resources Information Center

Amirault, Ray J.; Visser, Yusra L.

2009-01-01

The University has a remarkably enduring history that is due in no small part to its ability to adapt itself whenever intellectual, political, or technological change has occurred. Today's technology revolution, however, presents the University with one of the greatest adaptation challenges it has ever faced in its lengthy history, and the…

Development of upper limb prostheses: current progress and areas for growth.

PubMed

González-Fernández, Marlís

2014-06-01

Upper extremity prosthetic technology has significantly changed in recent years. The devices available and those under development are more and more able to approximate the function of the lost limb; however, other challenges remain. This article provides a brief perspective on the most advanced upper limb prostheses available and the challenges present for continued development of the technology. Copyright © 2014 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Technology Challenges and Opportunities for Very Large In-Space Structural Systems

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Dorsey, John T.; Watson, Judith J.

2009-01-01

Space solar power satellites and other large space systems will require creative and innovative concepts in order to achieve economically viable designs. The mass and volume constraints of current and planned launch vehicles necessitate highly efficient structural systems be developed. In addition, modularity and in-space deployment/construction will be enabling design attributes. While current space systems allocate nearly 20 percent of the mass to the primary structure, the very large space systems of the future must overcome subsystem mass allocations by achieving a level of functional integration not yet realized. A proposed building block approach with two phases is presented to achieve near-term solar power satellite risk reduction with accompanying long-term technology advances. This paper reviews the current challenges of launching and building very large space systems from a structures and materials perspective utilizing recent experience. Promising technology advances anticipated in the coming decades in modularity, material systems, structural concepts, and in-space operations are presented. It is shown that, together, the current challenges and future advances in very large in-space structural systems may provide the technology pull/push necessary to make solar power satellite systems more technically and economically feasible.

Smart integrated microsystems: the energy efficiency challenge (Conference Presentation) (Plenary Presentation)

NASA Astrophysics Data System (ADS)

Benini, Luca

2017-06-01

The "internet of everything" envisions trillions of connected objects loaded with high-bandwidth sensors requiring massive amounts of local signal processing, fusion, pattern extraction and classification. From the computational viewpoint, the challenge is formidable and can be addressed only by pushing computing fabrics toward massive parallelism and brain-like energy efficiency levels. CMOS technology can still take us a long way toward this goal, but technology scaling is losing steam. Energy efficiency improvement will increasingly hinge on architecture, circuits, design techniques such as heterogeneous 3D integration, mixed-signal preprocessing, event-based approximate computing and non-Von-Neumann architectures for scalable acceleration.

Connected Building Challenge – Seattle Demonstration

ScienceCinema

Wang, Nora; Khamphanchai, Warodom; Chotibhongs, Tony; Hjortland, Andrew; David, Nigel; Bao, Han; Huang, Da-Wei; Shillingford, Kirk; Gutierrez, Lourdes; Kapadia, Priyank; Hagerman, Joe

2018-06-13

PNNL's first-ever innovation challenge invited teams to leverage PNNL's VOLTTRON technology to create solutions that advance the growth of the smart building market. Five teams presented their solutions at Seattle's Smart Buildings Center in early August 2016. This video summarizes the event.

Pervasive healthcare as a scientific discipline.

PubMed

Bardram, J E

2008-01-01

The OECD countries are facing a set of core challenges; an increasing elderly population; increasing number of chronic and lifestyle-related diseases; expanding scope of what medicine can do; and increasing lack of medical professionals. Pervasive healthcare asks how pervasive computing technology can be designed to meet these challenges. The objective of this paper is to discuss 'pervasive healthcare' as a research field and tries to establish how novel and distinct it is, compared to related work within biomedical engineering, medical informatics, and ubiquitous computing. The paper presents the research questions, approach, technologies, and methods of pervasive healthcare and discusses these in comparison to those of other related scientific disciplines. A set of central research themes are presented; monitoring and body sensor networks; pervasive assistive technologies; pervasive computing for hospitals; and preventive and persuasive technologies. Two projects illustrate the kind of research being done in pervasive healthcare. The first project is targeted at home-based monitoring of hypertension; the second project is designing context-aware technologies for hospitals. Both projects approach the healthcare challenges in a new way, apply a new type of research method, and come up with new kinds of technological solutions. 'Clinical proof-of-concept' is recommended as a new method for pervasive healthcare research; the method helps design and test pervasive healthcare technologies, and in ascertaining their clinical potential before large-scale clinical tests are needed. The paper concludes that pervasive healthcare as a research field and agenda is novel; it is addressing new emerging research questions, represents a novel approach, designs new types of technologies, and applies a new kind of research method.

TA-13: Ground and Launch Systems, 2015 NASA Technology Roadmaps

NASA Technical Reports Server (NTRS)

Fox, Jack J.

2015-01-01

This presentation is a summary of new content contained in the 2015 update of Technology Area-13, Ground and Launch Systems technology roadmap beyond the content contained in the 2010 version. Also included are brief assessments of benefits, alignments, challenges, technical risk and reasonableness, sequencing and timing, and time and effort to achieve goals. This presentation is part of overall presentations of new content only for the 2015 update of the 15 NASA Technology Roadmaps that will be conducted in a public forum managed by the National Research Council on September 28-29, 2015. The 15 roadmaps have already been publically released via the STI process.

“What Goes Around Comes Around”: Lessons Learned from Economic Evaluations of Personalized Medicine Applied to Digital Medicine

PubMed Central

Phillips, Kathryn A.; Douglas, Michael P.; Trosman, Julia R.; Marshall, Deborah A.

2016-01-01

Two key trends that emerge from the growth of “Big Data” and the emphasis on patient-centered healthcare are the increasing use of personalized medicine and digital medicine. In order for these technologies to move into mainstream health care and be reimbursed by insurers, it will be essential to have evidence that their benefits provide reasonable value relative to their costs. However, these technologies have complex characteristics that present challenges to assessment of their economic value. Previous work has identified these challenges for personalized medicine and thus this work can inform the more nascent topic of digital medicine. Our objective is to examine the methodological challenges and future opportunities for assessing the economic value of digital medicine, using personalized medicine as a comparison. We focus specifically on “digital biomarker technologies” and “multigene tests”. We identified similarities in these technologies that can present challenges to economic evaluation: multiple results, results with different types of utilities, secondary findings, downstream impact (including on family members), and interactive effects. Using a structured review, we found that there are few economic evaluations of digital biomarker technologies, with limited results. We conclude that more evidence on effectiveness of digital medicine will be needed but that the experiences with personalized medicine can inform what data will be needed and how such analyses can be conducted. Our study points out the critical need for typologies and terminology for digital medicine technologies that would enable them to be classified in ways that will facilitate research on their effectiveness and value. PMID:28212968

Challenging Aerospace Problems for Intelligent Systems

NASA Technical Reports Server (NTRS)

Krishnakumar, Kalmanje; Kanashige, John; Satyadas, A.; Clancy, Daniel (Technical Monitor)

2002-01-01

In this paper we highlight four problem domains that are well suited and challenging for intelligent system technologies. The problems are defined and an outline of a probable approach is presented. No attempt is made to define the problems as test cases. In other words, no data or set of equations that a user can code and get results are provided. The main idea behind this paper is to motivate intelligent system researchers to examine problems that will elevate intelligent system technologies and applications to a higher level.

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Challenging Aerospace Problems for Intelligent Systems

NASA Technical Reports Server (NTRS)

KrishnaKumar, K.; Kanashige, J.; Satyadas, A.

2003-01-01

In this paper we highlight four problem domains that are well suited and challenging for intelligent system technologies. The problems are defined and an outline of a probable approach is presented. No attempt is made to define the problems as test cases. In other words, no data or set of equations that a user can code and get results are provided. The main idea behind this paper is to motivate intelligent system researchers to examine problems that will elevate intelligent system technologies and applications to a higher level.

Data systems and computer science space data systems: Onboard networking and testbeds

NASA Technical Reports Server (NTRS)

Dalton, Dan

1991-01-01

The technical objectives are to develop high-performance, space-qualifiable, onboard computing, storage, and networking technologies. The topics are presented in viewgraph form and include the following: justification; technology challenges; program description; and state-of-the-art assessment.

Project Career: A qualitative examination of five college students with traumatic brain injuries.

PubMed

Nardone, Amanda; Sampson, Elaine; Stauffer, Callista; Leopold, Anne; Jacobs, Karen; Hendricks, Deborah J; Elias, Eileen; Chen, Hui; Rumrill, Phillip

2015-01-01

Project Career is an interprofessional five-year development project designed to improve the employment success of undergraduate college and university students with traumatic brain injury (TBI). The case study information was collected and synthesized by the project's Technology and Employment Coordinators (TECs) at each of the project's three university sites. The project's evaluation is occurring independently through JBS International, Inc. Five case studies are presented to provide an understanding of student participants' experiences within Project Career. Each case study includes background on the student, engagement with technology, vocational supports, and interactions with his/her respective TEC. A qualitative analysis from the student's case notes is provided within each case study, along with a discussion of the overall qualitative analysis. Across all five students, the theme Positive Outcomes was mentioned most often in the case notes. Of all the different type of challenges, Cognitive Challenges were most often mentioned during meetings with the TECs, followed by Psychological Challenges, Physical Challenges, Other Challenges, and Academic Challenges, respectively. Project Career is providing academic enrichment and career enhancement that may substantially improve the unsatisfactory employment outcomes that presently await students with TBI following graduation.

An update on pharmaceutical film coating for drug delivery.

PubMed

Felton, Linda A; Porter, Stuart C

2013-04-01

Pharmaceutical coating processes have generally been transformed from what was essentially an art form in the mid-twentieth century to a much more technology-driven process. This review article provides a basic overview of current film coating processes, including a discussion on polymer selection, coating formulation additives and processing equipment. Substrate considerations for pharmaceutical coating processes are also presented. While polymeric coating operations are commonplace in the pharmaceutical industry, film coating processes are still not fully understood, which presents serious challenges with current regulatory requirements. Novel analytical technologies and various modeling techniques that are being used to better understand film coating processes are discussed. This review article also examines the challenges of implementing process analytical technologies in coating operations, active pharmaceutical ingredients in polymer film coatings, the use of high-solids coating systems and continuous coating and other novel coating application methods.

Hybrid Placemaking in the Library: Designing Digital Technology to Enhance Users' On-Site Experience

ERIC Educational Resources Information Center

Bilandzic, Mark; Johnson, Daniel

2013-01-01

This paper presents research findings and design strategies that illustrate how digital technology can be applied as a tool for "hybrid" placemaking in ways that would not be possible in purely digital or physical spaces. Digital technology has revolutionised the way people learn and gather new information. This trend has challenged the…

Mobile Eye Tracking Methodology in Informal E-Learning in Social Groups in Technology-Enhanced Science Centres

ERIC Educational Resources Information Center

Magnussen, Rikke; Zachariassen, Maria; Kharlamov, Nikita; Larsen, Birger

2017-01-01

This paper presents a methodological discussion of the potential and challenges of involving mobile eye tracking technology in studies of knowledge generation and learning in a science centre context. The methodological exploration is based on eye-tracking studies of audience interaction and knowledge generation in the technology-enhanced health…

Facility Planning for 21st Century. Technology, Industry, and Education.

ERIC Educational Resources Information Center

Hill, Franklin

When the Orange County School Board (Orlando, Florida) decided to build a new high school, they recognized Central Florida's high technology emphasis as a special challenge. The new facility needed to meet present instructional demands while being flexible enough to incorporate 21st century technologies. The final result is a new $30 million high…

Teachers' Perceived Barriers to Technology Integration as Prescribed by 21st Century Learning Skills

ERIC Educational Resources Information Center

Young, Diane Killough

2012-01-01

Technology is a learning and teaching tool that enhances students' communication, innovation, and critical thinking skills, also known as 21st century learning goals. Successfully using technology in the classroom to promote these learning goals, however, has presented some challenges for teachers. While research has identified a variety of…

Biological Life Support Technologies: Commercial Opportunities

NASA Technical Reports Server (NTRS)

Nelson, Mark (Editor); Soffen, Gerald (Editor)

1990-01-01

The papers from the workshop on Biological Life Support Technologies: Commercial Opportunities are presented. The meeting attracted researchers in environmental and bioregenerative systems. The role of biological support technologies was evaluated in the context of the global environmental challenge on Earth and the space exploration initiative, with its goal of a permanent space station, lunar base, and Mars exploration.

Information on Demand in the Recording Studio: Building the Case for Teaching Music Technology with an Interactive Agenda

ERIC Educational Resources Information Center

Voss, Brett

2016-01-01

Education in a contemporary context increasingly requires students to engage with learning technologies. This can present a challenge to both students and teachers who at times struggle to engage with the technical processes involved in navigating these technologies. Outside of formal education settings, on-demand information facilitated through…

Scientific and Technological Progress, Political Beliefs and Environmental Sustainability

ERIC Educational Resources Information Center

Makrakis, Vassilios

2012-01-01

With the development of science and technology, a basically optimistic ideology of progress has emerged. This deterministic attitude has been challenged in recent decades as a result of harmful side-effects generated by the way technology and science have been approached and used. The study presented here is a part of a larger international and…

High performance MPEG-audio decoder IC

NASA Technical Reports Server (NTRS)

Thorn, M.; Benbassat, G.; Cyr, K.; Li, S.; Gill, M.; Kam, D.; Walker, K.; Look, P.; Eldridge, C.; Ng, P.

1993-01-01

The emerging digital audio and video compression technology brings both an opportunity and a new challenge to IC design. The pervasive application of compression technology to consumer electronics will require high volume, low cost IC's and fast time to market of the prototypes and production units. At the same time, the algorithms used in the compression technology result in complex VLSI IC's. The conflicting challenges of algorithm complexity, low cost, and fast time to market have an impact on device architecture and design methodology. The work presented in this paper is about the design of a dedicated, high precision, Motion Picture Expert Group (MPEG) audio decoder.

Coatings on Earth and Beyond

NASA Technical Reports Server (NTRS)

Calle, Luz Marina

2015-01-01

Coatings have always been spearheading technology developments, as they have to function faultlessly in very demanding conditions. Coatings for use on spacecraft and launch vehicle launch environments offer technological challenges beyond the normal boundaries of most coatings service environments. Among all the space environments, the most treacherous is that of the launch environment. To ensure the success of space missions, NASA must rely on the best materials available, and that very much includes coatings. What kind of technology can meet those challenges? What is expected of coatings manufacturers wanting to join the space race? What insights can the whole industry gain? Luz Marina Calle will present an overview of corrosion protective coatings at NASA.

DEVELOPMENT OF CFD SIMULATION APPLICATIONS FOR LOCAL-SCALE AREAS AND POTENTIAL INTERFACE WITH MESOSCALE MODELS

EPA Science Inventory

The presentation summarizes developments of ongoing applications of fine-scale (geometry specific) CFD simulations to urban areas within atmospheric boundary layers. Enabling technology today and challenges for the future are discussed. There is a challenging need to develop a ...

Incorporating Engineering Design Challenges into STEM Courses

ERIC Educational Resources Information Center

Householder, Daniel L., Ed.; Hailey, Christine E., Ed.

2012-01-01

Successful strategies for incorporating engineering design challenges into science, technology, engineering, and mathematics (STEM) courses in American high schools are presented in this paper. The developers have taken the position that engineering design experiences should be an important component of the high school education of all American…

Online Learner Engagement: Opportunities and Challenges with Using Data Analytics

ERIC Educational Resources Information Center

Bodily, Robert; Graham, Charles R.; Bush, Michael D.

2017-01-01

This article describes the crossroads between learning analytics and learner engagement. The authors do this by describing specific challenges of using analytics to support student engagement from three distinct perspectives: pedagogical considerations, technological issues, and interface design concerns. While engaging online learners presents a…

Telehealth and the global health network in the 21st century. From homecare to public health informatics.

PubMed

Kun, L G

2001-03-01

The Information Era we live in has created new challenges and opportunities. This age of information highways has an economic price, which has not been properly evaluated. Detailed studies are needed to prove the cost and medical effectiveness of these technologies as well as its effects in the quality of life. Our society's future may depend on it. People are living longer, discoveries in genetics and in information technology are not only helping produce newer drugs faster but also providing the opportunity to exploit new areas such as disease prevention. These technologies provide a variety of opportunities to address public health challenges such as universal access for the uneducated, counter-bioterrorism, telemedicine, distance education, and home care. These opportunities present new challenges such as: surveillance, privacy/confidentiality/security of personal information which will affect all of our lives. No strategy has been presented publicly (yet) addressing (neither) the benefits (n)or the pitfalls of such technologies. From an economic point of view it is an imperative necessity to understand the importance of the Information Technology Infrastructure (ITI) and what it is. The investments in creating and maintaining this ITI will not come from a single application area such as healthcare, but rather from a combination of sources such as electronic commerce, banking, financial, manufacturing, entertainment, travelling, weather forecasting, pharmaceuticals, education, defence and many other 'industries' or application areas.

Digital technologies in occupational therapy and physiotherapy undergraduate and postgraduate education: a scoping review protocol.

PubMed

Olivier, Benita; Verdonck, Michele; Casteleijn, Daleen

2017-11-01

How have digital technologies been used in occupational therapy and physiotherapy undergraduate and postgraduate education?Specifically, the objective of this scoping review is to present an overview of research on the use of digital technologies in terms of type of digital technology used, pedagogy associated with the use of digital technology, subject/topic/area of application, experiences/perception of digital technology used, outcomes of the digital technology used and challenges to the use of digital technologies in occupational therapy and physiotherapy undergraduate and postgraduate education.

Present challenges of research and technology politics

NASA Technical Reports Server (NTRS)

Bulow, A. V.

1982-01-01

Research and technology in Germany are discussed. The rapid transfer of scientific knowledge and techniques from the laboratory to the manufacturing and industrial communities is identified as a priority. It is recommended that the government give maximum support to the aviation and space flight industries.

Preparation of Water-Selective Polybutadiene Membranes and Their Use in Drying Alcohols by Pervaporation and Vapor Permeation Technologies

EPA Science Inventory

Separating azeotrope-forming solvent-water mixtures by conventional distillation poses technical, economic, and environmental challenges. Membrane technology using water-permselective membranes provides an efficient alternative for water removal from solvents. We present here a n...

Human factors lessons learned in the design and implementation of air traffic control systems

DOT National Transportation Integrated Search

1998-01-01

As air traffic continues to increase, new technology will be needed to accommodate it. The interesting opportunities that new technologies will present for air traffic control (ATC) will be matched by the human factors challenges. Automated tools, al...

2012 Innovators Awards

ERIC Educational Resources Information Center

Lloyd, Meg; Raths, David; Namahoe, Kanoe

2012-01-01

In this article, the authors present the 2012 Campus Technology Innovators. These IT leaders have deployed extraordinary technology solutions to meet campus challenges. The authors also recognize the vendors and products involved in making these innovative projects a success. The 10 winners are: (1) University of Arizona (Student Systems and…

Emissive flat panel displays: A challenge to the AMLCD

NASA Astrophysics Data System (ADS)

Walko, R. J.

According to some sources, flat panel displays (FPD's) for computers will represent a 20-40 billion dollar industry by the end of the decade and could leverage up to 100-200 billion dollars in computer sales. Control of the flat panel display industry could be a significant factor in the global economy if FPD's manage to tap into the enormous audio/visual consumer market. Japan presently leads the world in active matrix liquid crystal display (AMLCD) manufacturing, the current leading FPD technology. The AMLCD is basically a light shutter which does not emit light on its own, but modulates the intensity of a separate backlight. However, other technologies, based on light emitting phosphors, could eventually challenge the AMLCD's lead position. These light-emissive technologies do not have the size, temperature and viewing angle limitations of AMLCD's. In addition, they could also be less expensive to manufacture, and require a smaller capital outlay for a manufacturing plant. An overview of these alternative technologies is presented.

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances †

PubMed Central

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A.; Al-Khalifa, Hend S.

2016-01-01

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space. PMID:27196906

Ultra Wideband Indoor Positioning Technologies: Analysis and Recent Advances.

PubMed

Alarifi, Abdulrahman; Al-Salman, AbdulMalik; Alsaleh, Mansour; Alnafessah, Ahmad; Al-Hadhrami, Suheer; Al-Ammar, Mai A; Al-Khalifa, Hend S

2016-05-16

In recent years, indoor positioning has emerged as a critical function in many end-user applications; including military, civilian, disaster relief and peacekeeping missions. In comparison with outdoor environments, sensing location information in indoor environments requires a higher precision and is a more challenging task in part because various objects reflect and disperse signals. Ultra WideBand (UWB) is an emerging technology in the field of indoor positioning that has shown better performance compared to others. In order to set the stage for this work, we provide a survey of the state-of-the-art technologies in indoor positioning, followed by a detailed comparative analysis of UWB positioning technologies. We also provide an analysis of strengths, weaknesses, opportunities, and threats (SWOT) to analyze the present state of UWB positioning technologies. While SWOT is not a quantitative approach, it helps in assessing the real status and in revealing the potential of UWB positioning to effectively address the indoor positioning problem. Unlike previous studies, this paper presents new taxonomies, reviews some major recent advances, and argues for further exploration by the research community of this challenging problem space.

The challenge of benchmarking health systems: is ICT innovation capacity more systemic than organizational dependent?

PubMed

Lapão, Luís Velez

2015-01-01

The article by Catan et al. presents a benchmarking exercise comparing Israel and Portugal on the implementation of Information and Communication Technologies in the healthcare sector. Special attention was given to e-Health and m-Health. The authors collected information via a set of interviews with key stakeholders. They compared two different cultures and societies, which have reached slightly different implementation outcomes. Although the comparison is very enlightening, it is also challenging. Benchmarking exercises present a set of challenges, such as the choice of methodologies and the assessment of the impact on organizational strategy. Precise benchmarking methodology is a valid tool for eliciting information about alternatives for improving health systems. However, many beneficial interventions, which benchmark as effective, fail to translate into meaningful healthcare outcomes across contexts. There is a relationship between results and the innovational and competitive environments. Differences in healthcare governance and financing models are well known; but little is known about their impact on Information and Communication Technology implementation. The article by Catan et al. provides interesting clues about this issue. Public systems (such as those of Portugal, UK, Sweden, Spain, etc.) present specific advantages and disadvantages concerning Information and Communication Technology development and implementation. Meanwhile, private systems based fundamentally on insurance packages, (such as Israel, Germany, Netherlands or USA) present a different set of advantages and disadvantages - especially a more open context for innovation. Challenging issues from both the Portuguese and Israeli cases will be addressed. Clearly, more research is needed on both benchmarking methodologies and on ICT implementation strategies.

Assistive Technology in the Pacific: Symposium Proceedings. Leading the Challenge (San Diego, California, May 14-16, 1995) [and] Future Directions (Agana, Guam, December 3-6, 1995).

ERIC Educational Resources Information Center

Farley, Tania Huff, Comp.

This monograph presents the proceedings of two symposia on assistive technology for people with disabilities in Hawaii, American Samoa, Guam, the Federated States of Micronesia, Commonwealth of the Northern Mariana Islands, Republic of the Marshall Islands, and Palau. Following an overview, Sections 1 and 2 contain the presentations and…

[Telepsychiatry provides new opportunities for the prevention and treatment of mental health disorders].

PubMed

Folker, Marie Paldam; Helverskov, Trine; Nielsen, Amalie Søgaard; Jørgensen, Ulla Skov; Larsen, John Teilmann

2018-04-23

Digital technologies in mental healthcare are envisioned to offer easier, faster and more cost-effective access to mental healthcare. The scope for integrating digital technology into mental healthcare is vast: video conferencing, developing novel treatments using interactive software, mobile applications, and sensor technologies. We outline technology-based interventions, which are relevant to clinical practice, and present the evidence base for using digital technology as well as emerging challenges for their implementation in clinical practice.

Post-genomic science: cross-disciplinary and large-scale collaborative research and its organizational and technological challenges for the scientific research process.

PubMed

Welsh, Elaine; Jirotka, Marina; Gavaghan, David

2006-06-15

We examine recent developments in cross-disciplinary science and contend that a 'Big Science' approach is increasingly evident in the life sciences-facilitated by a breakdown of the traditional barriers between academic disciplines and the application of technologies across these disciplines. The first fruits of 'Big Biology' are beginning to be seen in, for example, genomics, (bio)-nanotechnology and systems biology. We suggest that this has profound implications for the research process and presents challenges both in technological design, in the provision of infrastructure and training, in the organization of research groups, and in providing suitable research funding mechanisms and reward systems. These challenges need to be addressed if the promise of this approach is to be fully realized. In this paper, we will draw on the work of social scientists to understand how these developments in science and technology relate to organizational culture, organizational change and the context of scientific work. We seek to learn from previous technological developments that seemed to offer similar potential for organizational and social change.

The Need and Challenges for Distributed Engine Control

NASA Technical Reports Server (NTRS)

Culley, Dennis E.

2013-01-01

The presentation describes the challenges facing the turbine engine control system. These challenges are primarily driven by a dependence on commercial electronics and an increasingly severe environment on board the turbine engine. The need for distributed control is driven by the need to overcome these system constraints and develop a new growth path for control technology and, as a result, improved turbine engine performance.

Fundamental Aeronautics Program: Overview of Propulsion Work in the Supersonic Cruise Efficiency Technical Challenge

NASA Technical Reports Server (NTRS)

Castner, Ray

2012-01-01

The Supersonics Project, part of NASA's Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2012) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Addressing Ethics and Technology in Business: Preparing Today's Students for the Ethical Challenges Presented by Technology in the Workplace

ERIC Educational Resources Information Center

Brooks, Rochelle

2008-01-01

The ethical development of information systems is but one of those sensitive scenarios associated with computer technology that has a tremendous impact on individuals and social life. The significance of these issues of concern cannot be overstated. However, since computer ethics is meant to be everybody's responsibility, the result can often be…

Promoting Children's Learning through Technology Literacy: Challenges to School Librarians in the 21st Century

ERIC Educational Resources Information Center

Ejikeme, Anthonia N.; Okpala, Helen N.

2017-01-01

In today's world of technological revolution, children need to be encouraged to be ready to acquire lifelong knowledge and skills in the 21st century. This paper presents an overview of the application of technologies in children's learning environment which apparently will give them the opportunity of making use of their thinking skills in order…

New Delivery Systems for the 21st Century.

ERIC Educational Resources Information Center

Van Patten, James J.

This paper presents an historical perspective on the development of educational delivery systems, and then turns to the challenges of the information age and the issues of developing new delivery systems in this challenging environment. The paper discusses the fragility of power sources and of the networked world; technological weaknesses; freedom…

Effective Learning of Probabilistic Models for Clinical Predictions from Longitudinal Data

ERIC Educational Resources Information Center

Yang, Shuo

2017-01-01

With the expeditious advancement of information technologies, health-related data presented unprecedented potentials for medical and health discoveries but at the same time significant challenges for machine learning techniques both in terms of size and complexity. Those challenges include: the structured data with various storage formats and…

Sustainability: Necessity for a Prosperous Society

ERIC Educational Resources Information Center

Fokkema, Jacob; Jansen, Leo; Mulder, Karel

2005-01-01

Purpose--To present the challenge of sustainable development, the way in which technology can address that challenge and the task of engineering education to train engineers for it. Design/methodology/approach--The paper describes briefly the history of the environmental and sustainability discourse in The Netherlands, as a densely populated…

Educational Robotics: Open Questions and New Challenges

ERIC Educational Resources Information Center

Alimisis, Dimitris

2013-01-01

This paper investigates the current situation in the field of educational robotics and identifies new challenges and trends focusing on the use of robotic technologies as a tool that will support creativity and other 21st-century learning skills. Finally, conclusions and proposals are presented for promoting cooperation and networking of…

The Store Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2014-01-01

Biomedical and robotic technologies are merging to present a wonderful opportunity to develop artificial limbs and prosthetic devices for humans injured on the job, in the military, or due to disease. In this challenge, students will have the opportunity to design a store or online service that specifically dedicates itself to amputees. Described…

Information Superhighway: An Overview of Technology Challenges. Report to the Congress.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC.

This report focuses on the pivotal technical issues associated with the National Information Infrastructure program, security and privacy, interoperability, and reliability, and presents the General Accounting Office's findings on these challenges. It is reported that while the structures and services to be offered by the information superhighway…

EDUCATIONAL TECHNOLOGY, PREPARATION AND USE IN ADULT BASIC EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

IVERSON, MAURICE T.; AND OTHERS

AUDIOVISUAL MATERIALS, WHEN COMBINED WITH CONSIDERATION OF THE WAYS PEOPLE LEARN, CAN OFFER NEW WAYS OF EXPRESSING IDEAS, PRESENTING INFORMATION, AND MAKING INSTRUCTION CHALLENGING AND EFFICIENT. THIS PUBLICATION, DIRECTED AT TEACHERS OF ADULT BASIC EDUCATION AND THEIR ADMINISTRATORS, ILLUSTRATES APPLICATIONS OF INSTRUCTIONAL TECHNOLOGY TO ADULT…

Augmented Virtual Reality: How to Improve Education Systems

ERIC Educational Resources Information Center

Fernandez, Manuel

2017-01-01

This essay presents and discusses the developing role of virtual and augmented reality technologies in education. Addressing the challenges in adapting such technologies to focus on improving students' learning outcomes, the author discusses the inclusion of experiential modes as a vehicle for improving students' knowledge acquisition.…

Game-Like Technology Innovation Education

ERIC Educational Resources Information Center

Magnussen, Rikke

2011-01-01

This paper examines the methodological challenges and perspectives of designing game-like scenarios for the implementation of innovation processes in school science education. This paper presents a design-based research study of a game-like innovation scenario designed for technology education for Danish public school students aged 13-15. Students…

No Computer Left Behind

ERIC Educational Resources Information Center

Cohen, Daniel J.; Rosenzweig, Roy

2006-01-01

The combination of the Web and the cell phone forecasts the end of the inexpensive technologies of multiple-choice tests and grading machines. These technological developments are likely to bring the multiple-choice test to the verge of obsolescence, mounting a substantial challenge to the presentation of history and other disciplines.

Implementation of workflow engine technology to deliver basic clinical decision support functionality

PubMed Central

2011-01-01

Background Workflow engine technology represents a new class of software with the ability to graphically model step-based knowledge. We present application of this novel technology to the domain of clinical decision support. Successful implementation of decision support within an electronic health record (EHR) remains an unsolved research challenge. Previous research efforts were mostly based on healthcare-specific representation standards and execution engines and did not reach wide adoption. We focus on two challenges in decision support systems: the ability to test decision logic on retrospective data prior prospective deployment and the challenge of user-friendly representation of clinical logic. Results We present our implementation of a workflow engine technology that addresses the two above-described challenges in delivering clinical decision support. Our system is based on a cross-industry standard of XML (extensible markup language) process definition language (XPDL). The core components of the system are a workflow editor for modeling clinical scenarios and a workflow engine for execution of those scenarios. We demonstrate, with an open-source and publicly available workflow suite, that clinical decision support logic can be executed on retrospective data. The same flowchart-based representation can also function in a prospective mode where the system can be integrated with an EHR system and respond to real-time clinical events. We limit the scope of our implementation to decision support content generation (which can be EHR system vendor independent). We do not focus on supporting complex decision support content delivery mechanisms due to lack of standardization of EHR systems in this area. We present results of our evaluation of the flowchart-based graphical notation as well as architectural evaluation of our implementation using an established evaluation framework for clinical decision support architecture. Conclusions We describe an implementation of a free workflow technology software suite (available at http://code.google.com/p/healthflow) and its application in the domain of clinical decision support. Our implementation seamlessly supports clinical logic testing on retrospective data and offers a user-friendly knowledge representation paradigm. With the presented software implementation, we demonstrate that workflow engine technology can provide a decision support platform which evaluates well against an established clinical decision support architecture evaluation framework. Due to cross-industry usage of workflow engine technology, we can expect significant future functionality enhancements that will further improve the technology's capacity to serve as a clinical decision support platform. PMID:21477364

Keeping learning central: a model for implementing emerging technologies

PubMed Central

Willcockson, Irmgard U.; Phelps, Cynthia L.

2010-01-01

Felt problem Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. Our solution We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms. PMID:20165698

Keeping learning central: a model for implementing emerging technologies.

PubMed

Willcockson, Irmgard U; Phelps, Cynthia L

2010-01-15

FELT PROBLEM: Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. OUR SOLUTION: We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms.

Techno-economic, location, and carbon emission analysis of thermochemical biomass to transportation fuels

NASA Astrophysics Data System (ADS)

Wright, Mark Mba

There are significant technological and systemic challenges faced by today's advanced biofuel industry. These challenges stem from the current state-of-technology and from the system (consumer market, infrastructure, environment...) in which this emerging industry is being developed. The state-of-technology will improve with continued efforts in technology development, but novel approaches are required to investigate the systemic challenges that limit the adoption of advanced biofuels. The motivation of this dissertation is to address the question of how to find cost-effective, sustainable, and environmentally responsible pathways for the production of biofuels. Economic competitiveness, long-term viability, and benign environmental impact are key for biofuels to be embraced by industry, government, and consumers. Techno-economic, location, and carbon emission analysis are research methodologies that help address each of these issues. The research approach presented in this dissertation is to combine these three methodologies into a holistic study of advanced biofuel technologies. The value of techno-economic, location, and carbon emission analysis is limited when conducted in isolation because of current public perception towards energy technologies. Energy technologies are evaluated based on multiple criteria with a significant emphasis on the three areas investigated in this study. There are important aspects within each of these fields that could significantly limit the value of advances in other fields of study. Therefore, it is necessary that future research in advanced biofuels always consider the systemic challenges faced by novel developments.

Report of the Panel on Computer and Information Technology

NASA Technical Reports Server (NTRS)

Lundstrom, Stephen F.; Larsen, Ronald L.

1984-01-01

Aircraft have become more and more dependent on computers (information processing) for improved performance and safety. It is clear that this activity will grow, since information processing technology has advanced by a factor of 10 every 5 years for the past 35 years and will continue to do so. Breakthroughs in device technology, from vacuum tubes through transistors to integrated circuits, contribute to this rapid pace. This progress is nearly matched by similar, though not as dramatic, advances in numerical software and algorithms. Progress has not been easy. Many technical and nontechnical challenges were surmounted. The outlook is for continued growth in capability but will require surmounting new challenges. The technology forecast presented in this report has been developed by extrapolating current trends and assessing the possibilities of several high-risk research topics. In the process, critical problem areas that require research and development emphasis have been identified. The outlook assumes a positive perspective; the projected capabilities are possible by the year 2000, and adequate resources will be made available to achieve them. Computer and information technology forecasts and the potential impacts of this technology on aeronautics are identified. Critical issues and technical challenges underlying the achievement of forecasted performance and benefits are addressed.

Using e-technologies in clinical trials

PubMed Central

Rosa, Carmen; Campbell, Aimee N. C.; Miele, Gloria M.; Brunner, Meg; Winstanley, Erin L.

2015-01-01

Clinical trials have been slow to incorporate e-technology (digital and electronic technology that utilizes mobile devices or the Internet) into the design and execution of studies. In the meantime, individuals and corporations are relying more on electronic platforms and most have incorporated such technology into their daily lives. This paper provides a general overview of the use of e-technologies in clinical trials research, specifically within the last decade, marked by rapid growth of mobile and Internet-based tools. Benefits of and challenges to the use of e-technologies in data collection, recruitment and retention, delivery of interventions, and dissemination are provided, as well as a description of the current status of regulatory oversight of e-technologies in clinical trials research. As an example of ways in which e-technologies can be used for intervention delivery, a summary of e-technologies for treatment of substance use disorders is presented. Using e-technologies to design and implement clinical trials has the potential to reach a wide audience, making trials more efficient while also reducing costs; however, researchers should be cautious when adopting these tools given the many challenges in using new technologies, as well as threats to participant privacy/confidentiality. Challenges of using e-technologies can be overcome with careful planning, useful partnerships, and forethought. The role of web- and smartphone-based applications is expanding, and the increasing use of those platforms by scientists and the public alike make them tools that cannot be ignored. PMID:26176884

Using e-technologies in clinical trials.

PubMed

Rosa, Carmen; Campbell, Aimee N C; Miele, Gloria M; Brunner, Meg; Winstanley, Erin L

2015-11-01

Clinical trials have been slow to incorporate e-technology (digital and electronic technology that utilizes mobile devices or the Internet) into the design and execution of studies. In the meantime, individuals and corporations are relying more on electronic platforms and most have incorporated such technology into their daily lives. This paper provides a general overview of the use of e-technologies in clinical trials research, specifically within the last decade, marked by rapid growth of mobile and Internet-based tools. Benefits of and challenges to the use of e-technologies in data collection, recruitment and retention, delivery of interventions, and dissemination are provided, as well as a description of the current status of regulatory oversight of e-technologies in clinical trials research. As an example of ways in which e-technologies can be used for intervention delivery, a summary of e-technologies for treatment of substance use disorders is presented. Using e-technologies to design and implement clinical trials has the potential to reach a wide audience, making trials more efficient while also reducing costs; however, researchers should be cautious when adopting these tools given the many challenges in using new technologies, as well as threats to participant privacy/confidentiality. Challenges of using e-technologies can be overcome with careful planning, useful partnerships, and forethought. The role of web- and smartphone-based applications is expanding, and the increasing use of those platforms by scientists and the public alike make them tools that cannot be ignored. Published by Elsevier Inc.

High Altitude Platform Aircraft at NASA Past, Present and Future

NASA Technical Reports Server (NTRS)

DelFrate, John H.

2006-01-01

This viewgraph presentation reviews NASA Dryden Flight Research Center's significant accomplishments from the Environment Research and Sensor Technology (ERAST) project, the present High Altitude Platform (HAP) needs and opportunities, NASA's Aeronautical focus shift, HAP Non-aeronautics challenges, and current HAP Capabilities.

Conference report: Bioanalysis highlights from the 2012 American Association of Pharmaceutical Scientists National Biotechnology Conference.

PubMed

Crisino, Rebecca M; Geist, Brian; Li, Jian

2012-09-01

The American Association of Pharmaceutical Scientists (AAPS) is an international forum for the exchange of knowledge among scientists to enhance their contributions to drug development. The annual National Biotechnology Conference, organized by the AAPS on 21-23 May 2012 in San Diego, CA, USA, brings together experts from various disciplines representing private industry, academia and governing institutions dedicated toward advancing the scientific and technological progress related to discovery, development and manufacture of medical biotechnology products. Over 300 scientific poster presentations and approximately 50 oral presentation and discussion sessions examined a breadth of topics pertaining to biotechnology drug development, such as the advancement of vaccines and biosimilars, emerging and innovative technologies, nonclinical and clinical bioanalysis, and regulatory updates. This conference report highlights the existing challenges with ligand-binding assays, emerging challenges, innovative integration of various technology platforms and applicable regulatory considerations as they relate to immunogenicity and pharmacokinetic bioanalytical assessments.

Structures and Materials Technologies for Extreme Environments Applied to Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Scotti, Stephen J.; Clay, Christopher; Rezin, Marc

2003-01-01

This paper provides an overview of the evolution of structures and materials technology approaches to survive the challenging extreme environments encountered by earth-to-orbit space transportation systems, with emphasis on more recent developments in the USA. The evolution of technology requirements and experience in the various approaches to meeting these requirements has significantly influenced the technology approaches. While previous goals were primarily performance driven, more recently dramatic improvements in costs/operations and in safety have been paramount goals. Technologies that focus on the cost/operations and safety goals in the area of hot structures and thermal protection systems for reusable launch vehicles are presented. Assessments of the potential ability of the various technologies to satisfy the technology requirements, and their current technology readiness status are also presented.

Technology tools to support reading in the digital age.

PubMed

Biancarosa, Gina; Griffiths, Gina G

2012-01-01

Advances in digital technologies are dramatically altering the texts and tools available to teachers and students. These technological advances have created excitement among many for their potential to be used as instructional tools for literacy education. Yet with the promise of these advances come issues that can exacerbate the literacy challenges identified in the other articles in this issue. In this article Gina Biancarosa and Gina Griffiths characterize how literacy demands have changed in the digital age and how challenges identified in other articles in the issue intersect with these new demands. Rather than seeing technology as something to be fit into an already crowded education agenda, Biancarosa and Griffiths argue that technology can be conceptualized as affording tools that teachers can deploy in their quest to create young readers who possess the higher levels of literacy skills and background knowledge demanded by today's information-based society. Biancarosa and Griffiths draw on research to highlight some of the ways technology has been used to build the skills and knowledge needed both by children who are learning to read and by those who have progressed to reading to learn. In their review of the research, Biancarosa and Griffiths focus on the hardware and software used to display and interface with digital text, or what they term e-reading technology. Drawing on studies of e-reading technology and computer technology more broadly, they also reflect on the very real, practical challenges to optimal use of e-reading technology. The authors conclude by presenting four recommendations to help schools and school systems meet some of the challenges that come with investing in e-reading technology: use only technologies that support Universal Design for Learning; choose evidence-based tools; provide technology users with systemic supports; and capitalize on the data capacities and volume of information that technology provides.

Advanced Technologies for Robotic Exploration Leading to Human Exploration: Results from the SpaceOps 2015 Workshop

NASA Technical Reports Server (NTRS)

Lupisella, Mark L.; Mueller, Thomas

2016-01-01

This paper will provide a summary and analysis of the SpaceOps 2015 Workshop all-day session on "Advanced Technologies for Robotic Exploration, Leading to Human Exploration", held at Fucino Space Center, Italy on June 12th, 2015. The session was primarily intended to explore how robotic missions and robotics technologies more generally can help lead to human exploration missions. The session included a wide range of presentations that were roughly grouped into (1) broader background, conceptual, and high-level operations concepts presentations such as the International Space Exploration Coordination Group Roadmap, followed by (2) more detailed narrower presentations such as rover autonomy and communications. The broader presentations helped to provide context and specific technical hooks, and helped lay a foundation for the narrower presentations on more specific challenges and technologies, as well as for the discussion that followed. The discussion that followed the presentations touched on key questions, themes, actions and potential international collaboration opportunities. Some of the themes that were touched on were (1) multi-agent systems, (2) decentralized command and control, (3) autonomy, (4) low-latency teleoperations, (5) science operations, (6) communications, (7) technology pull vs. technology push, and (8) the roles and challenges of operations in early human architecture and mission concept formulation. A number of potential action items resulted from the workshop session, including: (1) using CCSDS as a further collaboration mechanism for human mission operations, (2) making further contact with subject matter experts, (3) initiating informal collaborative efforts to allow for rapid and efficient implementation, and (4) exploring how SpaceOps can support collaboration and information exchange with human exploration efforts. This paper will summarize the session and provide an overview of the above subjects as they emerged from the SpaceOps 2015 Workshop session.

Promoting the Appropriate Use of Advanced Radiation Technologies in Oncology: Summary of a National Cancer Policy Forum Workshop.

PubMed

Smith, Grace L; Ganz, Patricia A; Bekelman, Justin E; Chmura, Steven J; Dignam, James J; Efstathiou, Jason A; Jagsi, Reshma; Johnstone, Peter A; Steinberg, Michael L; Williams, Stephen B; Yu, James B; Zietman, Anthony L; Weichselbaum, Ralph R; Tina Shih, Ya-Chen

2017-03-01

Leaders in the oncology community are sounding a clarion call to promote "value" in cancer care decisions. Value in cancer care considers the clinical effectiveness, along with the costs, when selecting a treatment. To discuss possible solutions to the current obstacles to achieving value in the use of advanced technologies in oncology, the National Cancer Policy Forum of the National Academies of Sciences, Engineering, and Medicine held a workshop, "Appropriate Use of Advanced Technologies for Radiation Therapy and Surgery in Oncology" in July 2015. The present report summarizes the discussions related to radiation oncology. The workshop convened stakeholders, including oncologists, researchers, payers, policymakers, and patients. Speakers presented on key themes, including the rationale for a value discussion on advanced technology use in radiation oncology, the generation of scientific evidence for value of advanced radiation technologies, the effect of both scientific evidence and "marketplace" (or economic) factors on the adoption of technologies, and newer approaches to improving value in the practice of radiation oncology. The presentations were followed by a panel discussion with dialogue among the stakeholders. Challenges to generating evidence for the value of advanced technologies include obtaining contemporary, prospective, randomized, and representative comparative effectiveness data. Proposed solutions include the use of prospective registry data; integrating radiation oncology treatment, outcomes, and quality benchmark data; and encouraging insurance coverage with evidence development. Challenges to improving value in practice include the slow adoption of higher value and the de-adoption of lower value treatments. The proposed solutions focused on engaging stakeholders in iterative, collaborative, and evidence-based efforts to define value and promote change in radiation oncology practice. Recent examples of ongoing or successful responses to the discussed challenges were provided. Discussions of "value" have increased as a priority in the radiation oncology community. Practitioners in the radiation oncology community can play a critical role in promoting a value-oriented framework to approach radiation oncology treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

NASA Technical Reports Server (NTRS)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

Professional Ethics for Digital Age Psychiatry: Boundaries, Privacy, and Communication.

PubMed

Sabin, James E; Harland, Jonathan Clark

2017-09-01

Internet and social media use continue to expand rapidly. Many patients and psychiatrists are bringing digital technologies into the treatment process, but relatively little attention has been paid to the ethical challenges in doing this. This review presents ethical guidelines for psychiatry in the digital age. Surveys demonstrate that patients are eager to make digital technologies part of their treatment. Substantial numbers search for professional and personal information about their therapists. Attitudes among psychiatrists about using digital technologies with patients range from dread to enthusiastic adoption. Digital technologies create four major ethical challenges for psychiatry: managing clinical boundaries; maintaining privacy and confidentiality; establishing realistic expectations regarding digital communications; and upholding professional ideals. Traditional ethical expectations are valid for the evolving digital arena, but guidance must be adapted for actual application in practice.

Proceedings from the conference on high speed computing: High speed computing and national security

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hirons, K.P.; Vigil, M.; Carlson, R.

1997-07-01

This meeting covered the following topics: technologies/national needs/policies: past, present and future; information warfare; crisis management/massive data systems; risk assessment/vulnerabilities; Internet law/privacy and rights of society; challenges to effective ASCI programmatic use of 100 TFLOPs systems; and new computing technologies.

Bolstering Teaching through Online Tools

ERIC Educational Resources Information Center

Singh, Anil; Mangalaraj, George; Taneja, Aakash

2010-01-01

This paper offers a compilation of technologies that provides either free or low-cost solutions to the challenges of teaching online courses. It presents various teaching methods the outlined tools and technologies can support, with emphasis on fit between these tools and the tasks they are meant to serve. In addition, it highlights various…

"Facebooked: Romeo and Juliet" as Educational Theatre: An Improbable Fiction?

ERIC Educational Resources Information Center

Zdriluk, Helen

2016-01-01

This article addresses intersections of digital technology and Drama Education, with attention to an undergraduate playbuilding project focused on digital citizenship. It explores the challenges involved in structuring a technologically interactive presentation, as well as the positive impact of the piece achieved through the interplay of two…

Artificial Intelligence and School Library Media Centers.

ERIC Educational Resources Information Center

Young, Robert J.

1990-01-01

Discusses developments in artificial intelligence in terms of their impact on school library media centers and the role of media specialists. Possible uses of expert systems, hypertext, and CD-ROM technologies in school media centers are examined and the challenges presented by these technologies are discussed. Fourteen sources of additional…

Using Technology to Promote Active and Social Learning Experiences in Health Professions Education

ERIC Educational Resources Information Center

Ruckert, Elizabeth; McDonald, Paige L.; Birkmeier, Marissa; Walker, Bryan; Cotton, Linda; Lyons, Laurie B.; Straker, Howard O.; Plack, Margaret M.

2014-01-01

Time and space constraints, large class sizes, competition for clinical internships, and geographic separation between classroom and clinical rotations for student interaction with peers and faculty pose challenges for health professions educational programs. This article presents a model for effectively incorporating technology to overcome these…

People and Technology Today: Some Educational Implications

ERIC Educational Resources Information Center

Rodriguez-Sedano, Alfredo; Paris, Ana Costa; Mut, Maite Dassoy

2011-01-01

The present article approaches some of the educational implications borne by humanity with technological progress. We begin by pointing out significant data that classify what is considered relevant. Then, confronting the future is discussed by analyzing the attitudes necessary to promote the goals. Confronted with these challenges, three possible…

An Academic Ministry to Technology

ERIC Educational Resources Information Center

Lamar, William Fred

1976-01-01

The views of Hans Deiter Betz regarding the role of theology in higher education are discussed. The suggestion that the church challenge the concept of knowledge that is presently advocated in the technology oriented university is considered. Views of various other theologians are also described, and the need for Protestant churches to invest…

Collaborations beyond the Cave: A Consideration of the Sacred in the Creation of Collaborative Library Spaces

ERIC Educational Resources Information Center

Turner, Ralph Lamar

2013-01-01

This article examines the tensions and risks inherent in implementing new technologies and collaborative spaces while maintaining the library's critical role as a "civic temple" and knowledge center that inspires and facilitates contemplation and deep thought. New technologies present "disruptive" challenges, having already…

Science Questions and Broad Outline of Technology Needs of the Decade 2013-2022

NASA Technical Reports Server (NTRS)

SlIllon-Miller, A. A.

2012-01-01

We present an overview of the top priority science questions outlined in the Planetary Exploration Decadal Survey, "Vision and Voyages for Planetary Science in the Decade 2013-2022." The recommended mission portfolio, along with expected infrastructure challenges, should drive investments over the decade. The instrument and technology needs for the next decade will be presented, with a summary of progress since the Decadal.

Biological Invasions: A Challenge In Ecological Forecasting

NASA Technical Reports Server (NTRS)

Schnase, J. L.; Smith, J. A.; Stohlgren, T. J.; Graves, S.; Trees, C.; Rood, Richard (Technical Monitor)

2002-01-01

The spread of invasive species is one of the most daunting environmental, economic, and human-health problems facing the United States and the World today. It is one of several grand challenge environmental problems being considered by NASA's Earth Science Vision for 2025. The invasive species problem is complex and presents many challenges. Developing an invasive species predictive capability could significantly advance the science and technology of ecological forecasting.

The Role of Technology: Theme Group 3. Proceedings of the International Congress on Mathematical Education (5th, Adelaide, South Australia, August 24-30, 1984).

ERIC Educational Resources Information Center

Mohyla, Jury, Ed.

This conference report bears witness to the centrality and growing significance of the debate on the impact of technology on mathematics education. It presents an overview of the conference's Technology Theme group's work, featuring summaries of the reports of 17 constituent working groups under 6 major headings: (1) "Challenges to the…

Technology and Science Education: New Challenges

ERIC Educational Resources Information Center

García, Beatriz Amante; Martínez, María Martínez

2017-01-01

The first editorial of the new year usually presents an analysis of the journal evolution. This article provides a reflection on the changes the journal has undergone over the years, and the challenges it will face in 2017. The journal expresses pride in advocating for international scholars, allowing authors to speak with their own voices, and…

NASA's Use of Commercial Satellite Systems: Concepts and Challenges

NASA Technical Reports Server (NTRS)

Budinger, James M.

1998-01-01

Lewis Research Center's Space Communications Program has a responsibility to investigate, plan for, and demonstrate how NASA Enterprises can use advanced commercial communications services and technologies to satisfy their missions' space communications needs. This presentation looks at the features and challenges of alternative hardware system architecture concepts for providing specific categories of communications services.

Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability. OECD Workshop

USDA-ARS?s Scientific Manuscript database

This Special Issue of Bioresource Technology is dedicated to selected contributions presented at the international Workshop: “Livestock waste treatment systems of the future: A challenge to environmental quality, food safety, and sustainability,” held 2-4 April, 2008, in Florence, South Carolina (US...

Enhancing forest value productivity through fiber quality

Treesearch

D. Briggs

2010-01-01

Developing markets for carbon storage and bioenergy, shifting of the pulp and paper industry to biorefineries, and the potential of new technologies present the forest sector with exciting transformative opportunities and challenges. One of these challenges will be to understand the implications for fiber (wood) quality. This article provides a definitional context for...

A Model Driven Framework to Address Challenges in a Mobile Learning Environment

ERIC Educational Resources Information Center

Khaddage, Ferial; Christensen, Rhonda; Lai, Wing; Knezek, Gerald; Norris, Cathie; Soloway, Elliot

2015-01-01

In this paper a review of the pedagogical, technological, policy and research challenges and concepts underlying mobile learning is presented, followed by a brief description of categories of implementations. A model Mobile learning framework and dynamic criteria for mobile learning implementations are proposed, along with a case study of one site…

The Dynamics of Multicultural NPD Teams in Virtual Environments

ERIC Educational Resources Information Center

Fain, Nusa; Kline, Miro

2013-01-01

Changes in the business environment, responses of companies to these changes and the available information and communication technologies (ICT) pose a number of challenges to present and future product developers, as well as to educational institutions. An appropriate response to these challenges is to create a solid basis for strategies to combat…

Rethinking and Restructuring an Assessment System via Effective Deployment of Technology

ERIC Educational Resources Information Center

Okonkwo, Charity

2010-01-01

Every instructional process involves a strategic assessment system for a complete teaching-learning circle. Assessment system which is seriously challenged calls for a change in the approach. The National Open University of Nigeria (NOUN) assessment system at present is challenged. The large number of students and numerous courses offered by NOUN…

M-Learning Challenges in Teaching Crosscutting Themes in the Education of Young People and Adults

ERIC Educational Resources Information Center

Ota, Marcos Andrei; de Araujo, Carlos Fernando, Jr.

2016-01-01

The challenges faced in using new technologies in the classroom are numerous, but contributions generated with their resolution can proportionately provide original and efficient teaching practices more in tune to students' eager learning needs. This article presents some strategies developed to help teachers in transversal themes classes using…

Eastman Kodak Company: 21st Century Learning Challenge. Volunteer Resource Manual.

ERIC Educational Resources Information Center

Strother, Wanda M.; And Others

The Kodak 21st Century Learning Challenge is a companywide, 10-year corporate commitment to improve mathematics, science, and technology achievement for all students in the communities around Kodak's manufacturing plants. The Rochester (New York) initiative for which this training manual is presented is a partnership among Kodak, the Rochester…

Rooftop Garden Design Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2010-01-01

A small commercial building in a nearby industrial park has decided to install a rooftop garden for its employees to enjoy. The garden will be about 100 feet long and 75 feet wide. This article presents a design challenge for technology and engineering students wherein they will assist in the initial conceptual design of the rooftop garden. The…

Business Process Reengineering towards an Integrated Learning Management System

ERIC Educational Resources Information Center

Basal, Abdelraheem Mousa

2010-01-01

The task of managing an information technology (IT) system in a school environment poses unique challenges. For example, one of the greatest challenges facing individual schools is the lack of integration among various information systems. The present situation in many schools is that there are many disconnected systems managing many different…

Technology Challenges and Opportunities in Commercialing Industrial Biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davison, Brian H.; Lievense, Jeff

Industrial biotechnology is at a pivotal point, with tremendous and ongoing growth in technology contributing to a rich pipeline of opportunities: new products; new and more sustainable ways to make established products; and improvements to existing products and processes. The trillion-dollar questions are: When will there be a commercial breakout in industrial biotech as there has been in biopharma and ag biotech? What advances in technology are needed to make that happen? This article is drawn from the Workshop on Technology Challenges and Opportunities in Commercializing Industrial Biotechnology, sponsored by AIChE’s Society for Biological Engineering (SBE) and held Sept. 28–29,more » 2015, in San Diego. The workshop brought together industrial biotech stakeholders to share — through presentations, case studies, interactive discussions, and exhibits — perspectives on the state of industrial biotech, as well as to address key areas for technology advancement to benefit commercialization.« less

Technology Challenges and Opportunities in Commercialing Industrial Biotechnology

DOE PAGES

Davison, Brian H.; Lievense, Jeff

2016-06-01

Industrial biotechnology is at a pivotal point, with tremendous and ongoing growth in technology contributing to a rich pipeline of opportunities: new products; new and more sustainable ways to make established products; and improvements to existing products and processes. The trillion-dollar questions are: When will there be a commercial breakout in industrial biotech as there has been in biopharma and ag biotech? What advances in technology are needed to make that happen? This article is drawn from the Workshop on Technology Challenges and Opportunities in Commercializing Industrial Biotechnology, sponsored by AIChE’s Society for Biological Engineering (SBE) and held Sept. 28–29,more » 2015, in San Diego. The workshop brought together industrial biotech stakeholders to share — through presentations, case studies, interactive discussions, and exhibits — perspectives on the state of industrial biotech, as well as to address key areas for technology advancement to benefit commercialization.« less

Credibility assessments: operational issues and technology impact for law enforcement applications

NASA Astrophysics Data System (ADS)

Ryan, Andrew H., Jr.; Pavlidis, Ioannis; Rohrbaugh, J. W.; Marchak, Frank; Kozel, F. Andrew

2003-09-01

Law Enforcement personnel are faced with new challenges to rapidly assess the credibility of statements made by individuals in airports, border crossings, and a variety of environments not conducive to interviews. New technologies may offer assistance to law enforcement personnel in the interview and interrogation process. Additionally, homeland defense against terrorism challenges scientists to develop new methods of assessing truthfulness and credibility in humans. Current findings of four advanced research projects looking at emerging technologies in the credibility assessment are presented for discussion. This paper will discuss research efforts on four emerging technologies now underway at DoDPI and other institutions. These include: (1) Thermal Image Analysis (TIA); (2) Laser Doppler Vibrometry (LDV); (3) Eye Movement based Memory Assessment (EMMA); and (4) functional Magnetic Resonance Imaging (fMRI). A description each technique, the current state of these research efforts, and an overview of the potential for each of these emerging technologies will be provided.

Safe and Secure Virtualization: Answers for IMA next Generation and Beyond

NASA Astrophysics Data System (ADS)

Almeida, Jose; Vatrinet, Francis

2010-08-01

This paper presents some of the challenges the aerospace industry is facing for the future and explains why and how a safe and secured virtualization technology can help solving these challenges Efforts around the next generation of IMA have already started, like the European FP7 funded project SCARLETT or the IDEE5 project and many avionics players and working groupware focused on how the new technologies like SMP capabilities introduced in latest CPU architectures, can help increasing system performances in future avionics system. We present PikeOS, a separation micro-kernel, which applies the state-of-the-art techniques and widely recognized standards such as ARINC 653 and MILS in order to guarantee safety and security properties, and still improve overall performance.

The Challenges of Developing a Food System for a Mars Mission

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2007-01-01

A viewgraph describing the food system that NASA is developing for Manned Mars Missions is shown. The topics include: 1) The President's Vision for U.S. Space Exploration -January 14, 2004; 2) Introducing Orion (and Ares); 3) Mercury (1961-1963); 4) Gemini (1965-1966); 5) Apollo (1968-1972); 6) Skylab (1973-1974); 7) Shuttle/Mir (1995-1998); 8) Shuttle (1981-present) International Space Station (2000-present); 9) NASA Stored Food System; 10) Advanced Food Technology; 11) Orion Missions; 12) Orion Challenges; 13) Food Packaging; 14) Mars Mission Assumptions; 15) Planetary Food System Selected Crops; 16) Food Processing Equipment Constraints; 17) Crew Involvement Constraints; 18) Advanced Food Technology Integration; 19) Research Highlights Internal; and 20) Research Highlights External.

TH-D-BRC-01: Panel Member

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aydogan, B.

Interest in proton therapy has increased dramatically in the past couple of years, especially in the United States. There certainly is an important place for proton therapy in the arsenal of cancer treatments. Its dosimetric advantage and potential for low toxicity makes it the perfect partner for photons and other cancer treatment modalities. Often there is a belief that the new technology ought to be better but many believe that they should be widely adopted in the clinic only after evidence has shown that they are at least as safe and efficacious as existing technologies, which are often less expensive.more » This is the case for proton radiotherapy. This session being both educational and debate will provide a good review of basics and technological advancement as well as a comprehensive clinical update for both proton and photon therapy. Future technology developments and how they will impact the potential dosimetric advantage of proton therapy will be discussed. Particularly the debate will focus on whether these developments will close or widen the gap between photon and proton therapy. Learning Objectives: To review challenges, limitations, and recent and future developments in proton therapy. To review challenges, limitations, recent and future developments in photon radiotherapy. To review current clinical trials and challenging clinical cases. C. Yu, No company or organization that my presentation mentions provided me with financial support. I am the Founder and CEO of Xcision Medical Systems, LLC. However, my presentation will not mention any product or technology developed by Xcision.« less

TH-D-BRC-02: Panel Member

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn, S.

Interest in proton therapy has increased dramatically in the past couple of years, especially in the United States. There certainly is an important place for proton therapy in the arsenal of cancer treatments. Its dosimetric advantage and potential for low toxicity makes it the perfect partner for photons and other cancer treatment modalities. Often there is a belief that the new technology ought to be better but many believe that they should be widely adopted in the clinic only after evidence has shown that they are at least as safe and efficacious as existing technologies, which are often less expensive.more » This is the case for proton radiotherapy. This session being both educational and debate will provide a good review of basics and technological advancement as well as a comprehensive clinical update for both proton and photon therapy. Future technology developments and how they will impact the potential dosimetric advantage of proton therapy will be discussed. Particularly the debate will focus on whether these developments will close or widen the gap between photon and proton therapy. Learning Objectives: To review challenges, limitations, and recent and future developments in proton therapy. To review challenges, limitations, recent and future developments in photon radiotherapy. To review current clinical trials and challenging clinical cases. C. Yu, No company or organization that my presentation mentions provided me with financial support. I am the Founder and CEO of Xcision Medical Systems, LLC. However, my presentation will not mention any product or technology developed by Xcision.« less

TH-D-BRC-04: Panel Member

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yu, C.

Interest in proton therapy has increased dramatically in the past couple of years, especially in the United States. There certainly is an important place for proton therapy in the arsenal of cancer treatments. Its dosimetric advantage and potential for low toxicity makes it the perfect partner for photons and other cancer treatment modalities. Often there is a belief that the new technology ought to be better but many believe that they should be widely adopted in the clinic only after evidence has shown that they are at least as safe and efficacious as existing technologies, which are often less expensive.more » This is the case for proton radiotherapy. This session being both educational and debate will provide a good review of basics and technological advancement as well as a comprehensive clinical update for both proton and photon therapy. Future technology developments and how they will impact the potential dosimetric advantage of proton therapy will be discussed. Particularly the debate will focus on whether these developments will close or widen the gap between photon and proton therapy. Learning Objectives: To review challenges, limitations, and recent and future developments in proton therapy. To review challenges, limitations, recent and future developments in photon radiotherapy. To review current clinical trials and challenging clinical cases. C. Yu, No company or organization that my presentation mentions provided me with financial support. I am the Founder and CEO of Xcision Medical Systems, LLC. However, my presentation will not mention any product or technology developed by Xcision.« less

TH-D-BRC-03: Panel Member

DOE Office of Scientific and Technical Information (OSTI.GOV)

Paganetti, H.

Interest in proton therapy has increased dramatically in the past couple of years, especially in the United States. There certainly is an important place for proton therapy in the arsenal of cancer treatments. Its dosimetric advantage and potential for low toxicity makes it the perfect partner for photons and other cancer treatment modalities. Often there is a belief that the new technology ought to be better but many believe that they should be widely adopted in the clinic only after evidence has shown that they are at least as safe and efficacious as existing technologies, which are often less expensive.more » This is the case for proton radiotherapy. This session being both educational and debate will provide a good review of basics and technological advancement as well as a comprehensive clinical update for both proton and photon therapy. Future technology developments and how they will impact the potential dosimetric advantage of proton therapy will be discussed. Particularly the debate will focus on whether these developments will close or widen the gap between photon and proton therapy. Learning Objectives: To review challenges, limitations, and recent and future developments in proton therapy. To review challenges, limitations, recent and future developments in photon radiotherapy. To review current clinical trials and challenging clinical cases. C. Yu, No company or organization that my presentation mentions provided me with financial support. I am the Founder and CEO of Xcision Medical Systems, LLC. However, my presentation will not mention any product or technology developed by Xcision.« less

Promises and challenges in solid-state lighting

NASA Astrophysics Data System (ADS)

Schubert, Fred

2010-03-01

Lighting technologies based on semiconductor light-emitting diodes (LEDs) offer unprecedented promises that include three major benefits: (i) Gigantic energy savings enabled by efficient conversion of electrical energy to optical energy; (ii) Substantial positive contributions to sustainability through reduced emissions of global-warming gases, acid-rain gases, and toxic substances such as mercury; and (iii) The creation of new paradigms in lighting driven by the unique controllability of solid-state lighting sources. Due to the powerful nature of these benefits, the transition from conventional lighting sources to solid-state lighting is virtually assured. This presentation will illustrate the new world of lighting and illustrate the pervasive changes to be expected in lighting, displays, communications, and biotechnology. The presentation will also address the formidable challenges that must be addressed to continue the further advancement of solid-state lighting technology. These challenges offer opportunities for research and innovation. Specific challenges include light management, carrier transport, and optical design. We will present some innovative approaches in order to solve known technical challenges faced by solid-state lighting. These approaches include the demonstration and use of new optical thin-film materials with a continuously tunable refractive index. These approaches also include the use of polarization-matched structures that reduce the polarization fields in GaInN LEDs and the hotly debated efficiency droop, that is, the decreasing LED efficiency at high currents.

Bridging the Gap from Networking Technologies to Applications: Workshop Report

NASA Technical Reports Server (NTRS)

Johnson, Marjory J.; desJardins, Richard

2000-01-01

The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each application and technological challenges that remain. Next we present the technology roadmaps that were created at the workshop, summarizing the status of various mechanisms that are currently under development and forecasting when various advances are likely to occur within the next one-to-three-year time span. Then we identify issues that were raised at the workshop that might hinder technology development or that might impede integration into NGI applications. We also report some specific guidelines that were offered at the workshop to enable application developers to integrate and effectively use emerging NGI technology building blocks. Finally, we describe NREN activities to incorporate emerging technologies into NASA applications. These activities include support for other NASA High-Performance Computing and Communications Program areas such as IPG (Information Power Grid), support for NASA science enterprises such as Earth science and Mars program prototyping activities, support for satellite/terrestrial networking applications such as the TransAtlantic and TransPacific demonstrations and the Interplanetary Internet, support for NASA telemedicine applications such as the Virtual Collaborative Clinic, and participation in NGI advanced technology testbed initiatives such as the QBone and the NTON/Supernet. For each activity we highlight the primary technological challenge that is associated with it.

Web Design for Space Operations: An Overview of the Challenges and New Technologies Used in Developing and Operating Web-Based Applications in Real-Time Operational Support Onboard the International Space Station, in Astronaut Mission Planning and Mission Control Operations

NASA Technical Reports Server (NTRS)

Khan, Ahmed

2010-01-01

The International Space Station (ISS) Operations Planning Team, Mission Control Centre and Mission Automation Support Network (MAS) have all evolved over the years to use commercial web-based technologies to create a configurable electronic infrastructure to manage the complex network of real-time planning, crew scheduling, resource and activity management as well as onboard document and procedure management required to co-ordinate ISS assembly, daily operations and mission support. While these Web technologies are classified as non-critical in nature, their use is part of an essential backbone of daily operations on the ISS and allows the crew to operate the ISS as a functioning science laboratory. The rapid evolution of the internet from 1998 (when ISS assembly began) to today, along with the nature of continuous manned operations in space, have presented a unique challenge in terms of software engineering and system development. In addition, the use of a wide array of competing internet technologies (including commercial technologies such as .NET and JAVA ) and the special requirements of having to support this network, both nationally among various control centres for International Partners (IPs), as well as onboard the station itself, have created special challenges for the MCC Web Tools Development Team, software engineers and flight controllers, who implement and maintain this system. This paper presents an overview of some of these operational challenges, and the evolving nature of the solutions and the future use of COTS based rich internet technologies in manned space flight operations. In particular this paper will focus on the use of Microsoft.s .NET API to develop Web-Based Operational tools, the use of XML based service oriented architectures (SOA) that needed to be customized to support Mission operations, the maintenance of a Microsoft IIS web server onboard the ISS, The OpsLan, functional-oriented Web Design with AJAX

Factors Affecting Recruitment of Participants for Studies of Diabetes Technology in Newly Diagnosed Youth with Type 1 Diabetes: A Qualitative Focus Group Study with Parents and Children.

PubMed

Farrington, Conor; Allen, Janet; Tauschmann, Martin; Randell, Tabitha; Trevelyan, Nicola; Hovorka, Roman

2016-09-01

Relatively little is known about parents' or children's attitudes toward recruitment for, and participation in, studies of new diabetes technologies immediately after diagnosis. This study investigated factors affecting recruitment of participants for studies in newly diagnosed youth with type 1 diabetes. Qualitative focus group study incorporating four recorded focus groups, conducted in four outpatient pediatric diabetes clinics in large regional hospitals in England. Participants comprised four groups of parents (n = 22) and youth (n = 17) with type 1 diabetes, purposively sampled on the basis of past involvement (either participation or nonparticipation) in an ongoing two-arm randomized trial comparing multiple daily injection with conventional continuous subcutaneous insulin infusion regimens from the onset of type 1 diabetes. Stress associated with diagnosis presents significant challenges in terms of study recruitment, with parents demonstrating varied levels of willingness to be approached soon after diagnosis. Additional challenges arise regarding the following: randomization when study arms are perceived as sharply differentiated in terms of therapy effectiveness; burdens arising from study participation; and the need to surrender new technologies following the end of the study. However, these challenges were mostly insufficient to rule out study participation. Participants emphasized the benefits and reassurance arising from support provided by staff and fellow study participants. Recruitment to studies of new diabetes technologies immediately after diagnosis in youth presents significant challenges, but these are not insurmountable. The stress and uncertainty arising from potential participation may be alleviated by personalized discussion with staff and peer support from fellow study participants.

Application of advanced diffraction based optical metrology overlay capabilities for high-volume manufacturing

NASA Astrophysics Data System (ADS)

Chen, Kai-Hsiung; Huang, Guo-Tsai; Hsieh, Hung-Chih; Ni, Wei-Feng; Chuang, S. M.; Chuang, T. K.; Ke, Chih-Ming; Huang, Jacky; Rao, Shiuan-An; Cumurcu Gysen, Aysegul; d'Alfonso, Maxime; Yueh, Jenny; Izikson, Pavel; Soco, Aileen; Wu, Jon; Nooitgedagt, Tjitte; Ottens, Jeroen; Kim, Yong Ho; Ebert, Martin

2017-03-01

On-product overlay requirements are becoming more challenging with every next technology node due to the continued decrease of the device dimensions and process tolerances. Therefore, current and future technology nodes require demanding metrology capabilities such as target designs that are robust towards process variations and high overlay measurement density (e.g. for higher order process corrections) to enable advanced process control solutions. The impact of advanced control solutions based on YieldStar overlay data is being presented in this paper. Multi patterning techniques are applied for critical layers and leading to additional overlay measurement demands. The use of 1D process steps results in the need of overlay measurements relative to more than one layer. Dealing with the increased number of overlay measurements while keeping the high measurement density and metrology accuracy at the same time presents a challenge for high volume manufacturing (HVM). These challenges are addressed by the capability to measure multi-layer targets with the recently introduced YieldStar metrology tool, YS350. On-product overlay results of such multi-layers and standard targets are presented including measurement stability performance.

Empowering Personalized Medicine with Big Data and Semantic Web Technology: Promises, Challenges, and Use Cases.

PubMed

Panahiazar, Maryam; Taslimitehrani, Vahid; Jadhav, Ashutosh; Pathak, Jyotishman

2014-10-01

In healthcare, big data tools and technologies have the potential to create significant value by improving outcomes while lowering costs for each individual patient. Diagnostic images, genetic test results and biometric information are increasingly generated and stored in electronic health records presenting us with challenges in data that is by nature high volume, variety and velocity, thereby necessitating novel ways to store, manage and process big data. This presents an urgent need to develop new, scalable and expandable big data infrastructure and analytical methods that can enable healthcare providers access knowledge for the individual patient, yielding better decisions and outcomes. In this paper, we briefly discuss the nature of big data and the role of semantic web and data analysis for generating "smart data" which offer actionable information that supports better decision for personalized medicine. In our view, the biggest challenge is to create a system that makes big data robust and smart for healthcare providers and patients that can lead to more effective clinical decision-making, improved health outcomes, and ultimately, managing the healthcare costs. We highlight some of the challenges in using big data and propose the need for a semantic data-driven environment to address them. We illustrate our vision with practical use cases, and discuss a path for empowering personalized medicine using big data and semantic web technology.

JPL Advanced Thermal Control Technology Roadmap - 2008

NASA Technical Reports Server (NTRS)

Birur, Gaj

2008-01-01

This slide presentation reviews the status of thermal control technology at JPL and NASA.It shows the active spacecraft that are in vairous positions in the solar syatem, and beyond the solar system and the future missions that are under development. It then describes the challenges that the past missions posed with the thermal control systems. The various solutions that were implemented duirng the decades prior to 1990 are outlined. A review of hte thermal challenges of the future misions is also included. The exploration plan for Mars is then reviewed. The thermal challenges of the Mars Rovers are then outlined. Also the challenges of systems that would be able to be used in to explore Venus, and Titan are described. The future space telescope missions will also need thermal control technological advances. Included is a review of the thermal requirements for manned missions to the Moon. Both Active and passive technologies that have been used and will be used are reviewed. Those that are described are Mechanically Pumped Fluid Loops (MPFL), Loop Heat Pipes, an M3 Passive Cooler, Heat Siwtch for Space and Mars surface applications, phase change material (PCM) technology, a Gas Gap Actuateor using ZrNiH(x), the Planck Sorption Cooler (PCS), vapor compression -- Hybrid two phase loops, advanced pumps for two phase cooling loops, and heat pumps that are lightweight and energy efficient.

Research and technology, 1993

NASA Technical Reports Server (NTRS)

1994-01-01

Selected research and technology activities at Ames Research Center, including the Moffett Field site and the Dryden Flight Research Facility, are summarized. These activities exemplify the center's varied and productive research efforts for 1993. This year's report presents some of the challenging work recently accomplished in the areas of aerospace systems, flight operations and research, aerophysics, and space research.

Integrating Multimedia Technology in a High School EFL Program

ERIC Educational Resources Information Center

Mayora, Carlos A.

2006-01-01

The author describes a Technologically Enhanced Language Learning program in Venezuela and how it helped improve high school EFL instruction. The author presents six challenges of teaching EFL and describes the context for the program. The author then provides a rationale for using multimedia in language teaching, based on theoretical frameworks.…

Choice, Coverage & Cost in the Countryside: A Topology of Adolescent Rural Mobile Technology Use

ERIC Educational Resources Information Center

Taylor, Calvin

2009-01-01

As mobile technologies become increasingly prevalent throughout Australian society, it is important to consider the impact of local factors on their use. In order to support rural students and develop appropriate mobile learning frameworks, it is essential to have an understanding of the particular communication challenges presented by local…

Convergence of Information and Communication Technology (ICT) Tools in Project Based Learning (PBL)

ERIC Educational Resources Information Center

Thamarasseri, Ismail

2014-01-01

Rapid technological advancement influences the communication and information management as well as knowledge construction. Within the context of new challenges, lifelong learning emerges a fundamental element for the constant development of professionals. So that it dynamically adapts to change and retain a state-of-the-art identity. At present,…

Pilot Study on Demonstration of Remedial Action Technologies for Contaminated Land and Groundwater Volumes 1 and 2 EPA/600/SR-93/012

EPA Science Inventory

This two-volume report presents information on a 5-yr pilot study (1986- 1991) sponsored by the North Atlantic Treaty Organization's (NATO) Committee on the Challenges of Modern Society (CCMS) entitled "Demonstration of Remedial Action Technologies for Contaminated Land and Gr...

The State of Simulations: Soft-Skill Simulations Emerge as a Powerful New Form of E-Learning.

ERIC Educational Resources Information Center

Aldrich, Clark

2001-01-01

Presents responses of leaders from six simulation companies about challenges and opportunities of soft-skills simulations in e-learning. Discussion includes: evaluation metrics; role of subject matter experts in developing simulations; video versus computer graphics; technology needed to run simulations; technology breakthroughs; pricing;…

How Word Processing Is Changing Our Teaching: New Technologies, New Approaches, New Challenges.

ERIC Educational Resources Information Center

Rodrigues, Dawn; Rodrigues, Raymond

1989-01-01

Presents teaching variations with a word-processing package and related tools that enable teachers to develop different computer-writing pedagogies for their distinct contexts: traditional classroom, computer lab, or some combination of both. Emphasizes that teachers who re-envision teaching with regard to available technology can create dynamic…

Teacher Challenges to Implement Engineering Design in Secondary Technology Education

ERIC Educational Resources Information Center

Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

This descriptive study examined the current status of technology education teacher practices with respect to engineering design. This article is the third article in a three-part series presenting the results of this study. The first article in the series titled "Examination of Engineering Design Curriculum Content" highlighted the research…

Urban Explorations for Language Learning: A Gamified Approach to Teaching Italian in a University Context

ERIC Educational Resources Information Center

Charitonos, Koula; Morini, Luca; Arnab, Sylvester; Cervi-Wilson, Tiziana; Brick, Billy

2016-01-01

The recent technological developments and widespread use of mobile technologies challenge traditional knowledge and skills, with language learning increasingly taking place beyond the language classroom in learners' own environments. The paper presents the ImparApp study that focuses on a pervasive and gamified approach to language teaching and…

Technological Skills and New Professional Profiles: Present Challenges for Journalism

ERIC Educational Resources Information Center

López-García, Xosé; Rodríguez-Vázquez, Ana-Isabel; Pereira-Fariña, Xosé

2017-01-01

The paper aims at understanding the intersections between technology and the professional practices in some of the new trends in journalism that are using the new tools: multimedia journalism, immersive journalism, and data journalism. The great dilemma facing journalism when training new professionals--especially the youngest--is not the training…

Rural Schools: Off the Beaten Path

ERIC Educational Resources Information Center

Gordon, Dan

2011-01-01

This article is the second of a two-part series on how schools in different types of communities meet the challenge of implementing technology. The emergence of technology as a critical component of education has presented rural districts with an invaluable tool for overcoming the problems created by sparse and remote populations. But rural…

Systems Challenges for Hypersonic Vehicles

NASA Technical Reports Server (NTRS)

Hunt, James L.; Laruelle, Gerard; Wagner, Alain

1997-01-01

This paper examines the system challenges posed by fully reusable hypersonic cruise airplanes and access to space vehicles. Hydrocarbon and hydrogen fueled airplanes are considered with cruise speeds of Mach 5 and 10, respectively. The access to space matrix is examined. Airbreathing and rocket powered, single- and two-stage vehicles are considered. Reference vehicle architectures are presented. Major systems/subsystems challenges are described. Advanced, enhancing systems concepts as well as common system technologies are discussed.

Proceedings of the Antenna Applications Symposium (32nd) Held in Monticello, Illinois on 16-18 September 2008. Volume 2

DTIC Science & Technology

2008-12-20

operational concepts. The adaptation or translations of these systems can provide an effective means of addressing many current and emerging challenges . The...providing stealth, cloaking, mimicry and other capabilities such as EM windowing to these platforms presents many challenges as their operational role...physical insight into a complex system or emerging technological challenges . A bio-system that shares synergistic goals with this complex system

Ceramic Integration Technologies for Aerospace and Energy Systems: Technical Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay

2007-01-01

Ceramic integration technology has been recognized as an enabling technology for the implementation of advanced ceramic systems in a number of high-temperature applications in aerospace, power generation, nuclear, chemical, and electronic industries. Various ceramic integration technologies (joining, brazing, attachments, repair, etc.) play a role in fabrication and manufacturing of large and complex shaped parts of various functionalities. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various challenges and opportunities in design, fabrication, and testing of integrated similar (ceramic-ceramic) and dissimilar (ceramic-metal) material systems will be discussed. Experimental results for bonding and integration of SiC based LDI fuel injector, high conductivity C/C composite based heat rejection system, solid oxide fuel cells system, ultra high temperature ceramics for leading edges, and ceramic composites for thermostructural applications will be presented. Potential opportunities and need for the development of innovative design philosophies, approaches, and integrated system testing under simulated application conditions will also be discussed.

The challenges of integrating instrumentation with inflatable aerodynamic decelerators

NASA Astrophysics Data System (ADS)

Swanson, Gregory T.; Cassell, Alan M.; Hughes, Stephen J.; Johnson, R. Keith; Calomino, Anthony M.

New Entry, Decent, and Landing (EDL) technologies are being explored to facilitate the landing of high mass vehicles. Current EDL technologies are limited due to mass and volume constraints dictated by launch vehicle fairings. Therefore, past and present technologies are now being considered to provide a mass and volume efficient solution, including Inflatable Aerodynamic Decelerators (IADs). To better define the instrumentation challenges posed by IAD technology development, a survey was conducted to identify valuable measurements for ground and flight testing of the flexible materials and structures used in their design. From this survey many sensing technologies and systems were explored specific to the stacked torus IAD, resulting in a down-selection to the most viable prospects. The majority of these systems, including wireless data acquisition, were then rapid prototyped and evaluated during component level testing to determine the best integration techniques specific to a 3m and 6m diameter stacked toroid IAD. Each sensing system was then integrated in support of the Hypersonic Inflatable Aerodynamic Decelerator ground test campaign. In this paper these IAD instrumentation systems are described along with their challenges in comparison to traditional rigid aeroshell systems. Requirements resulting from the survey are listed and instrumentation integration techniques and data acquisition are discussed.

The Virtual Learning Commons: An Emerging Technology for Learning About Emerging Technologies

NASA Astrophysics Data System (ADS)

Pennington, D. D.; Del Rio, N.; Fierro, C.; Gandara, A.; Garcia, A.; Garza, J.; Giandoni, M.; Ochoa, O.; Padilla, E.; Salamah, S.

2013-12-01

The Virtual Learning Commons (VLC), funded by the National Science Foundation Office of Cyberinfrastructure CI-Team Program, is a combination of semantic, visualization, and social media tools that support knowledge sharing and innovation across research disciplines. The explosion of new scientific tools and techniques challenges the ability of researchers to be aware of emerging technologies that might benefit them. Even when aware, it can be difficult to understand enough about emerging technologies to become potential adopters or re-users. Often, emerging technologies have little documentation, especially about the context of their use. The VLC tackles this challenge by providing mechanisms for individuals and groups of researchers to collectively organize Web resources through social bookmarking, and engage each other around those collections in order to a) learn about potentially relevant technologies that are emerging; and b) get feedback from other researchers on innovative ideas and designs. Concurrently, developers of emerging technologies can learn about potential users and the issues they encounter, and they can analyze the impact of their tools on other projects. The VLC aims to support the 'fuzzy front end' of innovation, where novel ideas emerge and there is the greatest potential for impact on research design. It is during the fuzzy front end that conceptual collisions across disciplines and exposure to diverse perspectives provide opportunity for creative thinking that can lead to inventive outcomes. This presentation will discuss the innovation theories that have informed design of the VLC, and hypotheses about the flow of information in virtual settings that can enable the process of innovation. The presentation will include a brief demonstration of key capabilities within the VLC that enable learning about emerging technologies, including the technologies that are presented in this session.

The Role of Stem Cell Therapeutics in Wound Healing: Current Understanding and Future Directions.

PubMed

Sorice, Sarah; Rustad, Kristine C; Li, Alexander Y; Gurtner, Geoffrey C

2016-09-01

Chronic wounds present unique challenges for healthcare providers as they place patients at increased risk for various morbidities and mortality. Advances in wound care technology have expanded the treatment options available for wound management, but few products fully address the underlying core deficiencies responsible for the development of poorly healing wounds. In the future, addressing these derangements will undoubtedly play a key role in the treatment of these patients. Broad enthusiasm has surrounded the field of stem cell biology, which has shown great promise in repairing damaged tissues across numerous disease phenotypes. In this review, we provide a comprehensive review of the literature and evaluate the present landscape of wound therapeutics while discussing the rationales and allure behind stem cell-based products. We further propose 2 challenges that remain as new stem cell-based therapies are being developed and as this technology moves toward clinical translation. Given the relatively young age of this newer technology in wound healing, numerous challenges continue to surround its effective use including identifying the ideal population of stem cells to use and determining the optimal cell delivery method. However, significant forward progress has been made, with several clinical trials beginning to demonstrate reliable clinical benefit. The upward trajectory of stem cell technologies provides an exciting opportunity to positively impact patient outcomes through the controlled application of regenerative cell-based therapy.

The impact of next-generation sequencing on genomics

PubMed Central

Zhang, Jun; Chiodini, Rod; Badr, Ahmed; Zhang, Genfa

2011-01-01

This article reviews basic concepts, general applications, and the potential impact of next-generation sequencing (NGS) technologies on genomics, with particular reference to currently available and possible future platforms and bioinformatics. NGS technologies have demonstrated the capacity to sequence DNA at unprecedented speed, thereby enabling previously unimaginable scientific achievements and novel biological applications. But, the massive data produced by NGS also presents a significant challenge for data storage, analyses, and management solutions. Advanced bioinformatic tools are essential for the successful application of NGS technology. As evidenced throughout this review, NGS technologies will have a striking impact on genomic research and the entire biological field. With its ability to tackle the unsolved challenges unconquered by previous genomic technologies, NGS is likely to unravel the complexity of the human genome in terms of genetic variations, some of which may be confined to susceptible loci for some common human conditions. The impact of NGS technologies on genomics will be far reaching and likely change the field for years to come. PMID:21477781

Manned spacecraft electrical power systems

NASA Technical Reports Server (NTRS)

Simon, William E.; Nored, Donald L.

1987-01-01

A brief history of the development of electrical power systems from the earliest manned space flights illustrates a natural trend toward a growth of electrical power requirements and operational lifetimes with each succeeding space program. A review of the design philosophy and development experience associated with the Space Shuttle Orbiter electrical power system is presented, beginning with the state of technology at the conclusion of the Apollo Program. A discussion of prototype, verification, and qualification hardware is included, and several design improvements following the first Orbiter flight are described. The problems encountered, the scientific and engineering approaches used to meet the technological challenges, and the results obtained are stressed. Major technology barriers and their solutions are discussed, and a brief Orbiter flight experience summary of early Space Shuttle missions is included. A description of projected Space Station power requirements and candidate system concepts which could satisfy these anticipated needs is presented. Significant challenges different from Space Shuttle, innovative concepts and ideas, and station growth considerations are discussed. The Phase B Advanced Development hardware program is summarized and a status of Phase B preliminary tradeoff studies is presented.

Technological Challenges to X-Ray FELs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nuhn, Heinz-Dieter

1999-09-16

There is strong interest in the development of x-ray free electron lasers (x-ray FELs). The interest is driven by the scientific opportunities provided by intense, coherent x-rays. An x-ray FEL has all the characteristics of a fourth-generation source: brightness several orders of magnitude greater than presently achieved in third-generation sources, full transverse coherence, and sub-picosecond long pulses. The SLAC and DESY laboratories have presented detailed design studies for X-Ray FEL user facilities around the 0.1 nm wavelength-regime (LCLS at SLAC, TESLA X-Ray FEL at DESY). Both laboratories are engaged in proof-of-principle experiments are longer wavelengths (TTF FEL Phase I atmore » 71 nm, VISA at 600-800 nm) with results expected in 1999. The technologies needed to achieve the proposed performances are those of bright electron sources, of acceleration systems capable of preserving the brightness of the source, and of undulators capable of meeting the magnetic and mechanical tolerances that are required for operation in the SASE mode. This paper discusses the technological challenges presented by the X-Ray FEL projects.« less

Emergence of 3D Printed Dosage Forms: Opportunities and Challenges.

PubMed

Alhnan, Mohamed A; Okwuosa, Tochukwu C; Sadia, Muzna; Wan, Ka-Wai; Ahmed, Waqar; Arafat, Basel

2016-08-01

The recent introduction of the first FDA approved 3D-printed drug has fuelled interest in 3D printing technology, which is set to revolutionize healthcare. Since its initial use, this rapid prototyping (RP) technology has evolved to such an extent that it is currently being used in a wide range of applications including in tissue engineering, dentistry, construction, automotive and aerospace. However, in the pharmaceutical industry this technology is still in its infancy and its potential yet to be fully explored. This paper presents various 3D printing technologies such as stereolithographic, powder based, selective laser sintering, fused deposition modelling and semi-solid extrusion 3D printing. It also provides a comprehensive review of previous attempts at using 3D printing technologies on the manufacturing dosage forms with a particular focus on oral tablets. Their advantages particularly with adaptability in the pharmaceutical field have been highlighted, which enables the preparation of dosage forms with complex designs and geometries, multiple actives and tailored release profiles. An insight into the technical challenges facing the different 3D printing technologies such as the formulation and processing parameters is provided. Light is also shed on the different regulatory challenges that need to be overcome for 3D printing to fulfil its real potential in the pharmaceutical industry.

Women in the Changing Workplace: New Opportunities and New Challenges.

ERIC Educational Resources Information Center

21st Century Policy Review, 1992

1992-01-01

This interview with Elsie Vartanian, Director of the Women's Bureau of the Office of the Secretary of the U.S. Department of Labor, reviews the impact of economic and technological changes on women in the workplace, and examines major challenges these changes present. The role of the Women's Bureau in promoting and improving employment…

The Marketing & Management of Distance Education: Challenges of the 1980s and 90s.

ERIC Educational Resources Information Center

Young, H. Clifton

Distance educators find themselves in a growth segment of the education industry. Distance educators must understand why the industry is growing. This growth presents a number of challenges. Four contributing factors are: (1) changes in educational delivery and regulations; (2) changes in technology; (3) changes in society; and (4) environmental…

The Speeding Car Design Challenge

ERIC Educational Resources Information Center

Roman, Harry T.

2009-01-01

All too often, one reads about high-speed police chases in pursuit of stolen cars that result in death and injury to people and innocent bystanders. Isn't there another way to accomplish the apprehension of the thieves that does not put people at such great risk? This article presents a classroom challenge to use technology to remotely shutdown…

Increasing Early Opportunities in Engineering for Advanced Learners in Elementary Classrooms: A Review of Recent Literature

ERIC Educational Resources Information Center

Dailey, Debbie; Cotabish, Alicia; Jackson, Nykela

2018-01-01

Present and future challenges in our society demand a solid science, technology, engineering, and mathematics (STEM) knowledge base, innovative thinking, and the ability to ask the right questions to generate multiple solutions. To prepare innovators to meet these challenges, we must recognize and develop their talents. This advancement and growth…

Wireless Instrumentation Systems for Flight Testing at NASA AFRC

NASA Technical Reports Server (NTRS)

Hang, Richard

2017-01-01

NASA Armstrong Flight Research Center is revolutionizing its traditional wired instrumentation systems with wireless technologies. This effort faces many technical challenges, such as spectrum compliance, time synchronization, power distribution and airworthiness. This presentation summarizes NASA AFRC's flight test capabilities with current conventional instrumentation methodology and highlights the technical challenges of wireless systems used for flight test research applications.

Radiation Testing on State-of-the-Art CMOS: Challenges, Plans, and Preliminary Results

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2009-01-01

At GOMAC 2007 and 2008, we discussed a variety of challenges for radiation testing of modern semiconductor devices and technologies [1, 2]. In this presentation, we provide more specific details in this on-going investigation focusing on out-of-the-box lessons observed for providing radiation effects assurances as well as preliminary test results.

Platform based design of EAP transducers in Danfoss PolyPower A/S

NASA Astrophysics Data System (ADS)

Sarban, Rahimullah; Gudlaugsson, Tómas V.

2013-04-01

Electroactive Polymer (EAP) has gained increasing focus, in research communities, in last two decades. Research within the field of EAP has, so far, been mainly focused on material improvements, characterization, modeling and developing demonstrators. As the EAP technology matures, the need for a new area of research namely product development emerges. Product development can be based on an isolated design and production for a single product or platform design where a product family is developed. In platform design the families of products exploits commonality of platform modules while satisfying a variety of different market segments. Platform based approach has the primary benefit of being cost efficient and short lead time to market when new products emerges. Products development based on EAP technology is challenging both technologically as well as from production and processing point of view. Both the technological and processing challenges need to be addressed before a successful implementation of EAP technology into products. Based on this need Danfoss PolyPower A/S has, in 2011, launched a EAP platform project in collaboration with three Danish universities and three commercial organizations. The aim of the project is to develop platform based designs and product family for the EAP components to be used in variety of applications. This paper presents the structure of the platform project as a whole and specifically the platform based designs of EAP transducers. The underlying technologies, essential for EAP transducers, are also presented. Conceptual design and solution for the concepts are presented as well.

Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.; Venkatapathy, Ethiraj; Gage, Peter J.; Yount, Bryan C.; Prabhu, Dinesh K.; Smith, Brandon; Arnold, James O.; Makino, alberto; Peterson, Keith Hoppe; Chinnapongse, Ronald I.

2012-01-01

Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

[The technological innovation strategy for quality control of Chinese medicine based on Big Data].

PubMed

Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

2015-09-01

The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

NASA (Career Day)

NASA Technical Reports Server (NTRS)

Griffin, Amanda

2012-01-01

The presentation was developed for speakers to user for outreach. It provides information about Kennedy Space Center programs, launch services, the International Space Station, and the technological challenges of life in space.

Parallel Index and Query for Large Scale Data Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chou, Jerry; Wu, Kesheng; Ruebel, Oliver

2011-07-18

Modern scientific datasets present numerous data management and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive exploration of large datasets, but numerous challenges remain in terms of designing a system for process- ing general scientific datasets. The system needs to be able to run on distributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the-art index and query technology (FastBit) and is designed to process mas- sive datasets on modern supercomputing platforms. We apply FastQuery to processing ofmore » a massive 50TB dataset generated by a large scale accelerator modeling code. We demonstrate the scalability of the tool to 11,520 cores. Motivated by the scientific need to search for inter- esting particles in this dataset, we use our framework to reduce search time from hours to tens of seconds.« less

US EPA - A*Star Partnership - Accelerating the Acceptance of ...

EPA Pesticide Factsheets

The path for incorporating new alternative methods and technologies into quantitative chemical risk assessment poses a diverse set of scientific challenges. Some of these challenges include development of relevant and predictive test systems and computational models to integrate and extrapolate experimental data, and rapid characterization and acceptance of these systems and models. The series of presentations will highlight a collaborative effort between the U.S. Environmental Protection Agency (EPA) and the Agency for Science, Technology and Research (A*STAR) that is focused on developing and applying experimental and computational models for predicting chemical-induced liver and kidney toxicity, brain angiogenesis, and blood-brain-barrier formation. In addressing some of these challenges, the U.S. EPA and A*STAR collaboration will provide a glimpse of what chemical risk assessments could look like in the 21st century. Presentation on US EPA – A*STAR Partnership at international symposium on Accelerating the acceptance of next-generation sciences and their application to regulatory risk assessment in Singapore.

Accelerator physics and technology challenges of very high energy hadron colliders

NASA Astrophysics Data System (ADS)

Shiltsev, Vladimir D.

2015-08-01

High energy hadron colliders have been in the forefront of particle physics for more than three decades. At present, international particle physics community considers several options for a 100 TeV proton-proton collider as a possible post-LHC energy frontier facility. The method of colliding beams has not fully exhausted its potential but has slowed down considerably in its progress. This paper briefly reviews the accelerator physics and technology challenges of the future very high energy colliders and outlines the areas of required research and development towards their technical and financial feasibility.

Accelerator physics and technology challenges of very high energy hadron colliders

DOE PAGES

Shiltsev, Vladimir D.

2015-08-20

High energy hadron colliders have been in the forefront of particle physics for more than three decades. At present, international particle physics community considers several options for a 100 TeV proton–proton collider as a possible post-LHC energy frontier facility. The method of colliding beams has not fully exhausted its potential but has slowed down considerably in its progress. This article briefly reviews the accelerator physics and technology challenges of the future very high energy colliders and outlines the areas of required research and development towards their technical and financial feasibility.

Social Learning Analytics

ERIC Educational Resources Information Center

Buckingham Shum, Simon; Ferguson, Rebecca

2012-01-01

We propose that the design and implementation of effective "Social Learning Analytics (SLA)" present significant challenges and opportunities for both research and enterprise, in three important respects. The first is that the learning landscape is extraordinarily turbulent at present, in no small part due to technological drivers.…

A review on technologies and their usage in solid waste monitoring and management systems: Issues and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hannan, M.A., E-mail: hannan@eng.ukm.my; Abdulla Al Mamun, Md., E-mail: md.abdulla@siswa.ukm.edu.my; Hussain, Aini, E-mail: aini@eng.ukm.my

Highlights: • Classification of available technologies for SWM system in four core category. • Organization of technology based SWM systems in three main groups. • Summary of SWM systems with target application, methodology and functional domain. • Issues and challenges are highlighted for further design of a sustainable system. - Abstract: In the backdrop of prompt advancement, information and communication technology (ICT) has become an inevitable part to plan and design of modern solid waste management (SWM) systems. This study presents a critical review of the existing ICTs and their usage in SWM systems to unfold the issues and challengesmore » towards using integrated technologies based system. To plan, monitor, collect and manage solid waste, the ICTs are divided into four categories such as spatial technologies, identification technologies, data acquisition technologies and data communication technologies. The ICT based SWM systems classified in this paper are based on the first three technologies while the forth one is employed by almost every systems. This review may guide the reader about the basics of available ICTs and their application in SWM to facilitate the search for planning and design of a sustainable new system.« less

Digital media in the home: technical and research challenges

NASA Astrophysics Data System (ADS)

Ribas-Corbera, Jordi

2005-03-01

This article attempts to identify some of the technology and research challenges facing the digital media industry in the future. We first discuss several trends in the industry, such as the rapid growth of broadband Internet networks and the emergence of networking and media-capable devices in the home. Next, we present technical challenges that result from these trends, such as effective media interoperability in devices, and provide a brief overview of Windows Media, which is one of the technologies in the market attempting to address these challenges. Finally, given these trends and the state of the art, we argue that further research on data compression, encoder optimization, and multi-format transcoding can potentially make a significant technical and business impact in digital media. We also explore the reasons that research on related techniques such as wavelets or scalable video coding is having a relatively minor impact in today"s practical digital media systems.

Implementation and Evaluation of Multiple Adaptive Control Technologies for a Generic Transport Aircraft Simulation

NASA Technical Reports Server (NTRS)

Campbell, Stefan F.; Kaneshige, John T.; Nguyen, Nhan T.; Krishakumar, Kalmanje S.

2010-01-01

Presented here is the evaluation of multiple adaptive control technologies for a generic transport aircraft simulation. For this study, seven model reference adaptive control (MRAC) based technologies were considered. Each technology was integrated into an identical dynamic-inversion control architecture and tuned using a methodology based on metrics and specific design requirements. Simulation tests were then performed to evaluate each technology s sensitivity to time-delay, flight condition, model uncertainty, and artificially induced cross-coupling. The resulting robustness and performance characteristics were used to identify potential strengths, weaknesses, and integration challenges of the individual adaptive control technologies

[Advances in sensor node and wireless communication technology of body sensor network].

PubMed

Lin, Weibing; Lei, Sheng; Wei, Caihong; Li, Chunxiang; Wang, Cang

2012-06-01

With the development of the wireless communication technology, implantable biosensor technology, and embedded system technology, Body Sensor Network (BSN) as one branch of wireless sensor networks and important part of the Internet of things has caught more attention of researchers and enterprises. This paper offers the basic concept of the BSN and analyses the related research. We focus on sensor node and wireless communication technology from perspectives of technology challenges, research advance and development trend in the paper. Besides, we also present a relative overview of domestic and overseas projects for the BSN.

It's Your Turn

ERIC Educational Resources Information Center

Rosin, Carol S.

1974-01-01

Describes a series of films produced by Fairchild Industries which present a positive but realistic outlook toward the challenges of technology for secondary students. Unit's objectives, discussion suggestions and activities are discussed. (BR)

A review of smart homes- present state and future challenges.

PubMed

Chan, Marie; Estève, Daniel; Escriba, Christophe; Campo, Eric

2008-07-01

In the era of information technology, the elderly and disabled can be monitored with numerous intelligent devices. Sensors can be implanted into their home for continuous mobility assistance and non-obtrusive disease prevention. Modern sensor-embedded houses, or smart houses, cannot only assist people with reduced physical functions but help resolve the social isolation they face. They are capable of providing assistance without limiting or disturbing the resident's daily routine, giving him or her greater comfort, pleasure, and well-being. This article presents an international selection of leading smart home projects, as well as the associated technologies of wearable/implantable monitoring systems and assistive robotics. The latter are often designed as components of the larger smart home environment. The paper will conclude by discussing future challenges of the domain.

Crisis, change and creativity in science and technology: chemistry in the aftermath of twentieth-century global wars.

PubMed

Johnson, Jeffrey Allan

2011-07-01

This paper presents the organising ideas behind the symposium "Chemistry in the Aftermath of World Wars," held at the 23rd International Congress of History of Science and Technology, Budapest, 2009, whose theme was "Ideas and Instruments in Social Context." After first recounting the origins of the notion of "crisis" as a decisive turning point in general history as well as in the history of science, the paper presents war and its aftermath as a form of crisis that may affect science and technology, including chemistry, in a variety of contexts and leading to a variety of types of change. The twentieth-century world wars were exemplary forms of crisis, whose aftermaths shaped the contexts for decisive changes in modern chemistry, which continue to offer challenging opportunities for historical research. In discussing these, the paper cites selected current literature and briefly describes how the individual papers of the symposium, including the three papers published in this volume, approached these challenges.

Commercialisation of CMOS integrated circuit technology in multi-electrode arrays for neuroscience and cell-based biosensors.

PubMed

Graham, Anthony H D; Robbins, Jon; Bowen, Chris R; Taylor, John

2011-01-01

The adaptation of standard integrated circuit (IC) technology as a transducer in cell-based biosensors in drug discovery pharmacology, neural interface systems and electrophysiology requires electrodes that are electrochemically stable, biocompatible and affordable. Unfortunately, the ubiquitous Complementary Metal Oxide Semiconductor (CMOS) IC technology does not meet the first of these requirements. For devices intended only for research, modification of CMOS by post-processing using cleanroom facilities has been achieved. However, to enable adoption of CMOS as a basis for commercial biosensors, the economies of scale of CMOS fabrication must be maintained by using only low-cost post-processing techniques. This review highlights the methodologies employed in cell-based biosensor design where CMOS-based integrated circuits (ICs) form an integral part of the transducer system. Particular emphasis will be placed on the application of multi-electrode arrays for in vitro neuroscience applications. Identifying suitable IC packaging methods presents further significant challenges when considering specific applications. The various challenges and difficulties are reviewed and some potential solutions are presented.

Ceramic Integration Technologies for Advanced Energy Systems: Critical Needs, Technical Challenges, and Opportunities

NASA Technical Reports Server (NTRS)

Singh, Mrityunjay

2010-01-01

Advanced ceramic integration technologies dramatically impact the energy landscape due to wide scale application of ceramics in all aspects of alternative energy production, storage, distribution, conservation, and efficiency. Examples include fuel cells, thermoelectrics, photovoltaics, gas turbine propulsion systems, distribution and transmission systems based on superconductors, nuclear power generation and waste disposal. Ceramic integration technologies play a key role in fabrication and manufacturing of large and complex shaped parts with multifunctional properties. However, the development of robust and reliable integrated systems with optimum performance requires the understanding of many thermochemical and thermomechanical factors, particularly for high temperature applications. In this presentation, various needs, challenges, and opportunities in design, fabrication, and testing of integrated similar (ceramic ceramic) and dissimilar (ceramic metal) material www.nasa.gov 45 ceramic-ceramic-systems have been discussed. Experimental results for bonding and integration of SiC based Micro-Electro-Mechanical-Systems (MEMS) LDI fuel injector and advanced ceramics and composites for gas turbine applications are presented.

Information Systems for Government and Business: Challenges and Opportunities. Report and Summary of Proceedings of the Kawasaki International Seminar on the Information Systems Challenge for Government and Business (2nd, Kawasaki City, Japan, July 21-24, 1987). UNCRD Meeting Report Series, No. 23.

ERIC Educational Resources Information Center

United Nations Centre for Regional Development, Nagoya (Japan).

This report summarizes the presentations and discussions at an international seminar designed to provide an opportunity for the exchange of ideas about maximizing the use of information technology as a strategic weapon for achieving organizational changes and goals, and for achieving a competitive advantage. Among these presentations were the…

Optimizing Burn Treatment in Developing Low-and Middle-Income Countries with Limited Health Care Resources (Part 2)

PubMed Central

Atiyeh, B.; Masellis, A.; Conte, C.

2009-01-01

Summary The present review of the literature aims at analysing the challenges facing burn management in low- and middleincome countries (LMICs) and exploring probable modalities to optimize burn management in these countries. In Part 1, the epidemiology of burn injuries and the formidable challenges for proper management due to limited resources and inaccessibility to sophisticated skills and technologies in LMICs were presented. Part II will discuss the actual state of burn injuries management in LMICs. PMID:21991180

The Western North Carolina Technology Consortium: A Collaborative Approach to Bridging the Digital Divide

ERIC Educational Resources Information Center

Sink, David W.; Jackson, Karen Luke; Boham, Kenneth A.; Shockley, David

2004-01-01

Community college presidents face an uphill struggle in preparing their institutions for the rapidly changing technological learning environment. Visionary presidents in rural community colleges are presented with yet another challenge: that of finding themselves on the wrong side of the digital divide. This article describes how presidents of 12…

VET Workers' Problem-Solving Skills in Technology-Rich Environments: European Approach

ERIC Educational Resources Information Center

Hämäläinen, Raija; Cincinnato, Sebastiano; Malin, Antero; De Wever, Bram

2014-01-01

The European workplace is challenging VET adults' problem-solving skills in technology-rich environments (TREs). So far, no international large-scale assessment data has been available for VET. The PIAAC data comprise the most comprehensive source of information on adults' skills to date. The present study (N = 50 369) focuses on gaining insight…

The Technology and Society Internship Directory. A Comprehensive Guide to Washington, DC Internships, 1985-1986. First Edition.

ERIC Educational Resources Information Center

Sabonis-Chafee, Terry, Ed.

Information is presented on internships in the Washington, D.C., area that enable students to explore the effects of technology and science on society. Science and engineering student interns work in nonlaboratory environments, and nontechnical students may work in issue areas and newly emerging public policy challenges. The directory includes…

Wave Energy Prize -- Carderock Test Design and Rigging to Accommodate Diversity of Device Types

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driscoll, Frederick R

Wave Energy Prize Carderock Test Design and Rigging to Accommodate Diversity of Device Types presentation from the Water Power Technologies Office Peer Review, FY14-FY16. The challenge was to determine testing conditions, develop processing algorithms, and execute tests for equitable and consistent evaluation of different wave energy converter (WEC) technologies.

Reliability Considerations for Ultra- Low Power Space Applications

NASA Technical Reports Server (NTRS)

White, Mark; Johnston, Allan

2012-01-01

NASA, the aerospace community, and other high reliability (hi-rel) users of advanced microelectronic products face many challenges as technology continues to scale into the deep sub- micron region and ULP devices are sought after. Technology trends, ULP microelectronics, scaling and performance tradeoffs, reliability considerations, and spacecraft environments will be presented from a ULP perspective for space applications.

Podcasts: Are They an Effective Tool to Enhance Student Learning? A Case Study from McMaster University, Hamilton Canada

ERIC Educational Resources Information Center

Vajoczki, Susan; Watt, Susan; Marquis, Nick; Holshausen, Katherine

2010-01-01

As universities turn to technology to become more learner-centred and address challenges created by increasing class sizes, changing consumer expectations, and increasing numbers of disability accommodation requests it is important to test the utility of technology solutions. This presentation describes a study to determine the effects of…

NASA-OAST program in photovoltaic energy conversion

NASA Technical Reports Server (NTRS)

Mullin, J. P.; Flood, D. J.

1982-01-01

The NASA program in photovoltaic energy conversion includes research and technology development efforts on solar cells, blankets, and arrays. The overall objectives are to increase conversion efficiency, reduce mass, reduce cost, and increase operating life. The potential growth of space power requirements in the future presents a major challenge to the current state of technology in space photovoltaic systems.

An Exploration into Improving Examinees' Acceptance of Participation in an Online Exam

ERIC Educational Resources Information Center

Liu, I-Fan; Chen, Ruey-Shin; Lu, Hao-Chun

2015-01-01

With the rapid development of the Internet and information technology, the issues related to online exams have become the concern of an increasing number of researchers. At present, the biggest challenges for the integration of web communication technology into online exams are the ability to detect cheating behaviors during the exam, and the…

New Technology Tools for Human Development? Towards Policy and Practice for Knowledge Societies in Southern Africa.

ERIC Educational Resources Information Center

Johnson, Phyllis

2002-01-01

Explores the interface of technology and education for human development in southern Africa. Uses the case of Mozambique to describe the challenges presented by the global marketplace and local policy. Outlines the vision of the New Partnership for Africa's Development Centre (SARDC) to reduce the digital divide for Africa. (CAJ)

Experiences and Challenges of International Students in Technology-Rich Learning Environments

ERIC Educational Resources Information Center

Habib, Laurence; Johannesen, Monica; Øgrim, Leikny

2014-01-01

This article presents a study of international students and their use of technology in a Scandinavian institution of Higher Education. A special emphasis is placed on patterns of use of a virtual learning environment (VLE) that is available to all the study programmes at the institution. Actor-Network Theory (ANT) is used as a theoretical approach…

Advances in high throughput DNA sequence data compression.

PubMed

Sardaraz, Muhammad; Tahir, Muhammad; Ikram, Ataul Aziz

2016-06-01

Advances in high throughput sequencing technologies and reduction in cost of sequencing have led to exponential growth in high throughput DNA sequence data. This growth has posed challenges such as storage, retrieval, and transmission of sequencing data. Data compression is used to cope with these challenges. Various methods have been developed to compress genomic and sequencing data. In this article, we present a comprehensive review of compression methods for genome and reads compression. Algorithms are categorized as referential or reference free. Experimental results and comparative analysis of various methods for data compression are presented. Finally, key challenges and research directions in DNA sequence data compression are highlighted.

Potential Uses and Inherent Challenges of Using Genome-Scale Sequencing to Augment Current Newborn Screening.

PubMed

Berg, Jonathan S; Powell, Cynthia M

2015-10-05

Since newborn screening (NBS) began in the 1960s, technological advances have enabled its expansion to include an increasing number of disorders. Recent developments now make it possible to sequence an infant's genome relatively quickly and economically. Clinical application of whole-exome and whole-genome sequencing is expanding at a rapid pace but presents many challenges. Its utility in NBS has yet to be demonstrated and its application in the pediatric population requires examination, not only for potential clinical benefits, but also for the unique ethical challenges it presents. Copyright © 2015 Cold Spring Harbor Laboratory Press; all rights reserved.

Accenting Fashion: Cosmetics, Toiletries and Fragrances. Resources in Technology.

ERIC Educational Resources Information Center

Threlfall, K. Denise; Ritz, John M.

1994-01-01

Presents information on the manufacture of cosmetics, toiletries, and fragrances. Includes a design brief, giving context, challenge, objectives, material and equipment needs, evaluation, student outcomes, and quiz. (SK)

TH-D-BRC-00: Educational Point Counter/Point: Has Photon RT Hit the Limits?

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Interest in proton therapy has increased dramatically in the past couple of years, especially in the United States. There certainly is an important place for proton therapy in the arsenal of cancer treatments. Its dosimetric advantage and potential for low toxicity makes it the perfect partner for photons and other cancer treatment modalities. Often there is a belief that the new technology ought to be better but many believe that they should be widely adopted in the clinic only after evidence has shown that they are at least as safe and efficacious as existing technologies, which are often less expensive.more » This is the case for proton radiotherapy. This session being both educational and debate will provide a good review of basics and technological advancement as well as a comprehensive clinical update for both proton and photon therapy. Future technology developments and how they will impact the potential dosimetric advantage of proton therapy will be discussed. Particularly the debate will focus on whether these developments will close or widen the gap between photon and proton therapy. Learning Objectives: To review challenges, limitations, and recent and future developments in proton therapy. To review challenges, limitations, recent and future developments in photon radiotherapy. To review current clinical trials and challenging clinical cases. C. Yu, No company or organization that my presentation mentions provided me with financial support. I am the Founder and CEO of Xcision Medical Systems, LLC. However, my presentation will not mention any product or technology developed by Xcision.« less

Hearts and minds and nanotechnology

NASA Astrophysics Data System (ADS)

Toumey, Chris

2009-03-01

New research by social scientists is presenting a clearer picture of the factors that influence the public perception of nanotechnology and, as Chris Toumey reports, the results present challenges for those working to increase public acceptance of nanoscience and technology.See focus on public perceptions of nanotechnology.

Echoes of the Past, Glimpses of the Future - Ongoing Trends in Assurance of EEE Parts for Spaceflight

NASA Technical Reports Server (NTRS)

Sampson, Michael J.

2017-01-01

This presentation will review some past NASA presentations that had identified challenges and future trends in the assurance of Electrical, Electronic and Electromechanical (EEE) parts for spaceflight applications. It will contrast the concerns expressed in those presentations with the challenges of today and identify trends that give insight into the future. Common themes include the use of commercial parts, limited technical and physical resources, the pace of technology change and the difficulties in handling and testing individual parts as they become smaller and more complex. Some options for dealing with these challenges will be suggested to accommodate increasing numbers of smallsats, cubesats, constellations and other disruptive concepts, as space becomes more and more commercialized.

Mechanical Properties in Metal-Organic Frameworks: Emerging Opportunities and Challenges for Device Functionality and Technological Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burtch, Nicholas C.; Heinen, Jurn; Bennett, Thomas D.

We report that some of the most remarkable recent developments in metal–organic framework (MOF) performance properties can only be rationalized by the mechanical properties endowed by their hybrid inorganic–organic nanoporous structures. While these characteristics create intriguing application prospects, the same attributes also present challenges that will need to be overcome to enable the integration of MOFs with technologies where these promising traits can be exploited. In this review, emerging opportunities and challenges are identified for MOF-enabled device functionality and technological applications that arise from their fascinating mechanical properties. This is discussed not only in the context of their more well-studiedmore » gas storage and separation applications, but also for instances where MOFs serve as components of functional nanodevices. Recent advances in understanding MOF mechanical structure–property relationships due to attributes such as defects and interpenetration are highlighted, and open questions related to state-of-the-art computational approaches for quantifying their mechanical properties are critically discussed.« less

Usability and accessibility in consumer health informatics current trends and future challenges.

PubMed

Goldberg, Larry; Lide, Bettijoyce; Lowry, Svetlana; Massett, Holly A; O'Connell, Trisha; Preece, Jennifer; Quesenbery, Whitney; Shneiderman, Ben

2011-05-01

It is a truism that, for innovative eHealth systems to have true value and impact, they must first and foremost be usable and accessible by clinicians, consumers, and other stakeholders. In this paper, current trends and future challenges in the usability and accessibility of consumer health informatics will be described. Consumer expectations of their healthcare providers and healthcare records in this new era of consumer-directed care will be explored, and innovative visualizations, assistive technologies, and other ways that healthcare information is currently being provided and/or shared will be described. Challenges for ensuring the usability of current and future systems will also be discussed. An innovative model for conducting systematic, timely, user-centered research on consumer-facing websites at the National Cancer Institute (NCI) and the ongoing efforts at the National Institute of Standards and Technology (NIST) to promote health information technology (HIT) usability standards and evaluation criteria will also be presented. Copyright © 2011 American Journal of Preventive Medicine. All rights reserved.

Mechanical Properties in Metal-Organic Frameworks: Emerging Opportunities and Challenges for Device Functionality and Technological Applications

DOE PAGES

Burtch, Nicholas C.; Heinen, Jurn; Bennett, Thomas D.; ...

2017-11-17

We report that some of the most remarkable recent developments in metal–organic framework (MOF) performance properties can only be rationalized by the mechanical properties endowed by their hybrid inorganic–organic nanoporous structures. While these characteristics create intriguing application prospects, the same attributes also present challenges that will need to be overcome to enable the integration of MOFs with technologies where these promising traits can be exploited. In this review, emerging opportunities and challenges are identified for MOF-enabled device functionality and technological applications that arise from their fascinating mechanical properties. This is discussed not only in the context of their more well-studiedmore » gas storage and separation applications, but also for instances where MOFs serve as components of functional nanodevices. Recent advances in understanding MOF mechanical structure–property relationships due to attributes such as defects and interpenetration are highlighted, and open questions related to state-of-the-art computational approaches for quantifying their mechanical properties are critically discussed.« less

An Outlook on Lithium Ion Battery Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Manthiram, Arumugam

Lithium ion batteries as a power source are dominating in portable electronics, penetrating the electric vehicle market, and on the verge of entering the utility market for grid-energy storage. Depending on the application, trade-offs among the various performance parameters—energy, power, cycle life, cost, safety, and environmental impact—are often needed, which are linked to severe materials chemistry challenges. The current lithium ion battery technology is based on insertion-reaction electrodes and organic liquid electrolytes. With an aim to increase the energy density or optimize the other performance parameters, new electrode materials based on both insertion reaction and dominantly conversion reaction along withmore » solid electrolytes and lithium metal anode are being intensively pursued. In conclusion, this article presents an outlook on lithium ion technology by providing first the current status and then the progress and challenges with the ongoing approaches. In light of the formidable challenges with some of the approaches, the article finally points out practically viable near-term strategies.« less

Mechanical Properties in Metal-Organic Frameworks: Emerging Opportunities and Challenges for Device Functionality and Technological Applications.

PubMed

Burtch, Nicholas C; Heinen, Jurn; Bennett, Thomas D; Dubbeldam, David; Allendorf, Mark D

2017-11-17

Some of the most remarkable recent developments in metal-organic framework (MOF) performance properties can only be rationalized by the mechanical properties endowed by their hybrid inorganic-organic nanoporous structures. While these characteristics create intriguing application prospects, the same attributes also present challenges that will need to be overcome to enable the integration of MOFs with technologies where these promising traits can be exploited. In this review, emerging opportunities and challenges are identified for MOF-enabled device functionality and technological applications that arise from their fascinating mechanical properties. This is discussed not only in the context of their more well-studied gas storage and separation applications, but also for instances where MOFs serve as components of functional nanodevices. Recent advances in understanding MOF mechanical structure-property relationships due to attributes such as defects and interpenetration are highlighted, and open questions related to state-of-the-art computational approaches for quantifying their mechanical properties are critically discussed. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An Outlook on Lithium Ion Battery Technology

DOE PAGES

Manthiram, Arumugam

2017-09-07

Lithium ion batteries as a power source are dominating in portable electronics, penetrating the electric vehicle market, and on the verge of entering the utility market for grid-energy storage. Depending on the application, trade-offs among the various performance parameters—energy, power, cycle life, cost, safety, and environmental impact—are often needed, which are linked to severe materials chemistry challenges. The current lithium ion battery technology is based on insertion-reaction electrodes and organic liquid electrolytes. With an aim to increase the energy density or optimize the other performance parameters, new electrode materials based on both insertion reaction and dominantly conversion reaction along withmore » solid electrolytes and lithium metal anode are being intensively pursued. In conclusion, this article presents an outlook on lithium ion technology by providing first the current status and then the progress and challenges with the ongoing approaches. In light of the formidable challenges with some of the approaches, the article finally points out practically viable near-term strategies.« less

An Outlook on Lithium Ion Battery Technology

PubMed Central

2017-01-01

Lithium ion batteries as a power source are dominating in portable electronics, penetrating the electric vehicle market, and on the verge of entering the utility market for grid-energy storage. Depending on the application, trade-offs among the various performance parameters—energy, power, cycle life, cost, safety, and environmental impact—are often needed, which are linked to severe materials chemistry challenges. The current lithium ion battery technology is based on insertion-reaction electrodes and organic liquid electrolytes. With an aim to increase the energy density or optimize the other performance parameters, new electrode materials based on both insertion reaction and dominantly conversion reaction along with solid electrolytes and lithium metal anode are being intensively pursued. This article presents an outlook on lithium ion technology by providing first the current status and then the progress and challenges with the ongoing approaches. In light of the formidable challenges with some of the approaches, the article finally points out practically viable near-term strategies. PMID:29104922

Continence technologies whitepaper: Informing new engineering science research.

PubMed

Culmer, Pete; Alazmani, Ali; Bryant, Mike; Mancuso, Elena; King, Sarah; Mapunde, Vee; Jeays-Ward, Katherine; Heron, Nicola; Pearson, Russell; Vollebregt, Paul F; Corner, Lynne; Day, Richard

2018-06-01

Advances in healthcare technology for continence have historically been limited compared to other areas of medicine, reflecting the complexities of the condition and social stigma which act as a barrier to participation. This whitepaper has been developed to inspire and direct the engineering science community towards research opportunities that exist for continence technologies that address unmet needs in diagnosis, treatment and long-term management. Our aim is to pinpoint key challenges and highlight related research opportunities for novel technological advances. To do so, we draw on experience and expertise from academics, clinicians, patients and patient groups linked to continence healthcare. This is presented in four areas of consideration: the clinical pathway, patient perspective, research challenges and effective innovation. In each we introduce seminal research, background information and demonstrative case-studies, before discussing their relevance to engineering science researchers who are interested in approaching this overlooked but vital area of healthcare.

A Plan for Revolutionary Change in Gas Turbine Engine Control System Architecture

NASA Technical Reports Server (NTRS)

Culley, Dennis E.

2011-01-01

The implementation of Distributed Engine Control technology on the gas turbine engine has been a vexing challenge for the controls community. A successful implementation requires the resolution of multiple technical issues in areas such as network communications, power distribution, and system integration, but especially in the area of high temperature electronics. Impeding the achievement has been the lack of a clearly articulated message about the importance of the distributed control technology to future turbine engine system goals and objectives. To resolve these issues and bring the technology to fruition has, and will continue to require, a broad coalition of resources from government, industry, and academia. This presentation will describe the broad challenges facing the next generation of advanced control systems and the plan which is being put into action to successfully implement the technology on the next generation of gas turbine engine systems.

Orbiter entry aerothermodynamics

NASA Technical Reports Server (NTRS)

Ried, R. C.

1985-01-01

The challenge in the definition of the entry aerothermodynamic environment arising from the challenge of a reliable and reusable Orbiter is reviewed in light of the existing technology. Select problems pertinent to the orbiter development are discussed with reference to comprehensive treatments. These problems include boundary layer transition, leeward-side heating, shock/shock interaction scaling, tile gap heating, and nonequilibrium effects such as surface catalysis. Sample measurements obtained from test flights of the Orbiter are presented with comparison to preflight expectations. Numerical and wind tunnel simulations gave efficient information for defining the entry environment and an adequate level of preflight confidence. The high quality flight data provide an opportunity to refine the operational capability of the orbiter and serve as a benchmark both for the development of aerothermodynamic technology and for use in meeting future entry heating challenges.

A survey of big data research

PubMed Central

Fang, Hua; Zhang, Zhaoyang; Wang, Chanpaul Jin; Daneshmand, Mahmoud; Wang, Chonggang; Wang, Honggang

2015-01-01

Big data create values for business and research, but pose significant challenges in terms of networking, storage, management, analytics and ethics. Multidisciplinary collaborations from engineers, computer scientists, statisticians and social scientists are needed to tackle, discover and understand big data. This survey presents an overview of big data initiatives, technologies and research in industries and academia, and discusses challenges and potential solutions. PMID:26504265

Optimal technology investment strategies for a reusable launch vehicle

NASA Technical Reports Server (NTRS)

Moore, A. A.; Braun, R. D.; Powell, R. W.

1995-01-01

Within the present budgetary environment, developing the technology that leads to an operationally efficient space transportation system with the required performance is a challenge. The present research focuses on a methodology to determine high payoff technology investment strategies. Research has been conducted at Langley Research Center in which design codes for the conceptual analysis of space transportation systems have been integrated in a multidisciplinary design optimization approach. The current study integrates trajectory, propulsion, weights and sizing, and cost disciplines where the effect of technology maturation on the development cost of a single stage to orbit reusable launch vehicle is examined. Results show that the technology investment prior to full-scale development has a significant economic payoff. The design optimization process is used to determine strategic allocations of limited technology funding to maximize the economic payoff.

A Survey Of Architectural Approaches for Managing Embedded DRAM and Non-volatile On-chip Caches

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mittal, Sparsh; Vetter, Jeffrey S; Li, Dong

Recent trends of CMOS scaling and increasing number of on-chip cores have led to a large increase in the size of on-chip caches. Since SRAM has low density and consumes large amount of leakage power, its use in designing on-chip caches has become more challenging. To address this issue, researchers are exploring the use of several emerging memory technologies, such as embedded DRAM, spin transfer torque RAM, resistive RAM, phase change RAM and domain wall memory. In this paper, we survey the architectural approaches proposed for designing memory systems and, specifically, caches with these emerging memory technologies. To highlight theirmore » similarities and differences, we present a classification of these technologies and architectural approaches based on their key characteristics. We also briefly summarize the challenges in using these technologies for architecting caches. We believe that this survey will help the readers gain insights into the emerging memory device technologies, and their potential use in designing future computing systems.« less

Clock Technology Development in the Laser Cooling and Atomic Physics (LCAP) Program

NASA Technical Reports Server (NTRS)

Seidel, Dave; Thompson, R. J.; Klipstein, W. M.; Kohel, J.; Maleki, L.

2000-01-01

This paper presents the Laser Cooling and Atomic Physics (LCAP) program. It focuses on clock technology development. The topics include: 1) Overview of LCAP Flight Projects; 2) Space Clock 101; 3) Physics with Clocks in microgravity; 4) Space Clock Challenges; 5) LCAP Timeline; 6) International Space Station (ISS) Science Platforms; 7) ISS Express Rack; 8) Space Qualification of Components; 9) Laser Configuration; 10) Clock Rate Comparisons: GPS Carrier Phase Frequency Transfer; and 11) ISS Model Views. This paper is presented in viewgraph form.

Ex-Situ Remediation Technologies for Environmental Pollutants: A Critical Perspective.

PubMed

Kuppusamy, Saranya; Palanisami, Thavamani; Megharaj, Mallavarapu; Venkateswarlu, Kadiyala; Naidu, Ravi

2016-01-01

Pollution and the global health impacts from toxic environmental pollutants are presently of great concern. At present, more than 100 million people are at risk from exposure to a plethora of toxic organic and inorganic pollutants. This review is an exploration of the ex-situ technologies for cleaning-up the contaminated soil, groundwater and air emissions, highlighting their principles, advantages, deficiencies and the knowledge gaps. Challenges and strategies for removing different types of contaminants, mainly heavy metals and priority organic pollutants, are also described.

Cyber Technology for Materials and Structures in Aeronautics and Aerospace

NASA Technical Reports Server (NTRS)

Pipes, R. Byron

2002-01-01

The evolution of composites applications in aeronautics from 1970 to the present is discussed. The barriers and challenges to economic application and to certification are presented and recommendations for accelerated development are outlined. The potential benefits of emerging technologies to aeronautics and their foundation in composite materials are described and the resulting benefits in vehicle take off gross weight are quantified. Finally, a 21st century vision for aeronautics in which human mobility is increased by an order of magnitude is articulated.

Applications of Optical Fiber Assemblies in Harsh Environments, the Journey Past, Present and Future

NASA Technical Reports Server (NTRS)

Ott, Melanie N.; LaRocca, Frank; Thomas, William Joe; Switzer, Robert; Chuska, Richard; Macmurphy, Shawn

2008-01-01

Over the past ten years, NASA has studied the effects of harsh environments on optical fiber assemblies for communication systems, lidar systems, and science missions. The culmination of this has resulted in recent technologies that are unique and tailored to meeting difficult requirements under challenging performance constraints. This presentation will focus on the past mission applications of optical fiber assemblies including; qualification information, lessons learned and new technological advances that will enable the road ahead.

The Osseus platform: a prototype for advanced web-based distributed simulation

NASA Astrophysics Data System (ADS)

Franceschini, Derrick; Riecken, Mark

2016-05-01

Recent technological advances in web-based distributed computing and database technology have made possible a deeper and more transparent integration of some modeling and simulation applications. Despite these advances towards true integration of capabilities, disparate systems, architectures, and protocols will remain in the inventory for some time to come. These disparities present interoperability challenges for distributed modeling and simulation whether the application is training, experimentation, or analysis. Traditional approaches call for building gateways to bridge between disparate protocols and retaining interoperability specialists. Challenges in reconciling data models also persist. These challenges and their traditional mitigation approaches directly contribute to higher costs, schedule delays, and frustration for the end users. Osseus is a prototype software platform originally funded as a research project by the Defense Modeling & Simulation Coordination Office (DMSCO) to examine interoperability alternatives using modern, web-based technology and taking inspiration from the commercial sector. Osseus provides tools and services for nonexpert users to connect simulations, targeting the time and skillset needed to successfully connect disparate systems. The Osseus platform presents a web services interface to allow simulation applications to exchange data using modern techniques efficiently over Local or Wide Area Networks. Further, it provides Service Oriented Architecture capabilities such that finer granularity components such as individual models can contribute to simulation with minimal effort.

Theoretical modelling and optimization of bubble column dehumidifier for a solar driven humidification-dehumidification system

NASA Astrophysics Data System (ADS)

Ranjitha, P. Raj; Ratheesh, R.; Jayakumar, J. S.; Balakrishnan, Shankar

2018-02-01

Availability and utilization of energy and water are the top most global challenges being faced by the new millennium. At the present state water scarcity has become a global as well as a regional challenge. 40 % of world population faces water shortage. Challenge of water scarcity can be tackled only with increase in water supply beyond what is obtained from hydrological cycle. This can be achieved either by desalinating the sea water or by reusing the waste water. High energy requirement need to be overcome for either of the two processes. Of many desalination technologies, humidification dehumidification (HDH) technology powered by solar energy is widely accepted for small scale production. Detailed optimization studies on system have the potential to effectively utilize the solar energy for brackish water desalination. Dehumidification technology, specifically, require further study because the dehumidifier effectiveness control the energetic performance of the entire HDH system. The reason attributes to the high resistance involved to diffuse dilute vapor through air in a dehumidifier. The present work intends to optimize the design of a bubble column dehumidifier for a solar energy driven desalination process. Optimization is carried out using Matlab simulation. Design process will identify the unique needs of a bubble column dehumidifier in HDH system.

Fusion Materials Research at Oak Ridge National Laboratory in Fiscal Year 2014

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiffen, Frederick W.; Noe, Susan P.; Snead, Lance Lewis

2014-10-01

The realization of fusion energy is a formidable challenge with significant achievements resulting from close integration of the plasma physics and applied technology disciplines. Presently, the most significant technological challenge for the near-term experiments such as ITER, and next generation fusion power systems, is the inability of current materials and components to withstand the harsh fusion nuclear environment. The overarching goal of the ORNL fusion materials program is to provide the applied materials science support and understanding to underpin the ongoing DOE Office of Science fusion energy program while developing materials for fusion power systems. In doing so the programmore » continues to be integrated both with the larger U.S. and international fusion materials communities, and with the international fusion design and technology communities.« less

Single-Cell Microgels: Technology, Challenges, and Applications.

PubMed

Kamperman, Tom; Karperien, Marcel; Le Gac, Séverine; Leijten, Jeroen

2018-04-12

Single-cell-laden microgels effectively act as the engineered counterpart of the smallest living building block of life: a cell within its pericellular matrix. Recent breakthroughs have enabled the encapsulation of single cells in sub-100-μm microgels to provide physiologically relevant microniches with minimal mass transport limitations and favorable pharmacokinetic properties. Single-cell-laden microgels offer additional unprecedented advantages, including facile manipulation, culture, and analysis of individual cell within 3D microenvironments. Therefore, single-cell microgel technology is expected to be instrumental in many life science applications, including pharmacological screenings, regenerative medicine, and fundamental biological research. In this review, we discuss the latest trends, technical challenges, and breakthroughs, and present our vision of the future of single-cell microgel technology and its applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Use of Electronic Technologies to Promote Community and Personal Health for Individuals Unconnected to Health Care Systems

PubMed Central

Crilly, John F.; Volpe, Fred

2011-01-01

Ensuring health care services for populations outside the mainstream health care system is challenging for all providers. But developing the health care infrastructure to better serve such unconnected individuals is critical to their health care status, to third-party payers, to overall cost savings in public health, and to reducing health disparities. Our increasingly sophisticated electronic technologies offer promising ways to more effectively engage this difficult to reach group and increase its access to health care resources. This process requires developing not only newer technologies but also collaboration between community leaders and health care providers to bring unconnected individuals into formal health care systems. We present three strategies to reach vulnerable groups, outline benefits and challenges, and provide examples of successful programs. PMID:21566023

2014-2015 Offshore Wind Technologies Market Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Aaron

2015-11-18

This presentation provides an overview of progress toward offshore wind cost reduction in Europe and implications for the U.S. market. The presentation covers an overview of offshore wind developments, economic and performance trends, empirical evidence of LCOE reduction, and challenges and opportunities in the U.S. market.

SCIENCE INFORMATION MANAGEMENT COORDINATION BOARD (SIMCORB), PRESENTATION TO NORINE NOONAN - MARCH 26, 1999

EPA Science Inventory

This presentation to Norine Noonan, Assistant Administrator for ORD, explained the Implementation Coordination Plan developed by SIMCorB. The challenge to ORD is leveraging the evolution in technology to meet the needs posed by the change in the practice of environmental science....

Challenges and considerations for the design and production of a purpose-optimized body-worn wrist-watch computer

NASA Astrophysics Data System (ADS)

Narayanaswami, Chandra; Raghunath, Mandayam T.

2004-09-01

We outline a collection of technological challenges in the design of wearable computers with a focus on one of the most desirable form-factors, the wrist watch. We describe our experience with building three generations of wrist watch computers. We built these research prototypes as platforms to investigate the fundamental limitations of wearable computing. Results of our investigations are presented in the form of challenges that have been overcome and those that still remain.

Application of GIS technology in public health: successes and challenges.

PubMed

Fletcher-Lartey, Stephanie M; Caprarelli, Graziella

2016-04-01

The uptake and acceptance of Geographic Information Systems (GIS) technology has increased since the early 1990s and public health applications are rapidly expanding. In this paper, we summarize the common uses of GIS technology in the public health sector, emphasizing applications related to mapping and understanding of parasitic diseases. We also present some of the success stories, and discuss the challenges that still prevent a full scope application of GIS technology in the public health context. Geographical analysis has allowed researchers to interlink health, population and environmental data, thus enabling them to evaluate and quantify relationships between health-related variables and environmental risk factors at different geographical scales. The ability to access, share and utilize satellite and remote-sensing data has made possible even wider understanding of disease processes and of their links to the environment, an important consideration in the study of parasitic diseases. For example, disease prevention and control strategies resulting from investigations conducted in a GIS environment have been applied in many areas, particularly in Africa. However, there remain several challenges to a more widespread use of GIS technology, such as: limited access to GIS infrastructure, inadequate technical and analytical skills, and uneven data availability. Opportunities exist for international collaboration to address these limitations through knowledge sharing and governance.

Smart boards: a reemerging technology.

PubMed

Brigham, Tara J

2013-01-01

Smart boards, also known as interactive whiteboards (IWBs), are large, interactive, touch-sensitive displays that are mainly used for presentation or educational purposes. While some may not consider this an emerging technology today, changes in the design and capabilities challenge that line of thinking. This column will explain what a smart board is, provide a brief history about it, and describe where it is currently used and why it might be a technology to consider having in a library today.

Group-Oriented Services: A Shift towards Consumer-Managed Relationships in the Telecom Industry

NASA Astrophysics Data System (ADS)

Vrdoljak, Luka; Bojic, Iva; Podobnik, Vedran; Jezic, Gordan; Kusek, Mario

Today, telecom operators face a threefold challenge: a social challenge dealing with the evolution of the consumer lifestyle, a technological challenge dealing with ever changing ICT trends and a business challenge dealing with the need for innovative business models. This paper introduces an idea of group-oriented services, a special type of personalized telecom services, as a possible solution for all three of these challenges. A proof-of-concept service, called Agent-Based Mobile Content Brokerage, is presented and elaborated with the aim to demonstrate a shift towards consumer-managed relationships, a novel provisioning paradigm within the telecom industry.

Research and Technology, 1995

NASA Technical Reports Server (NTRS)

1996-01-01

This report presents some of the challenging research and technology accomplished at NASA Ames Research Center during FY95. The accomplishments address almost all goals of NASA's four Strategic Enterprises: Aeronautics and Space Transportation Technology, Space Sciences, Human Exploration and Development of Space, and Mission to Planet Earth. The report's primary purpose is to inform stakeholders, customers, partners, colleagues, contractors, employees, and the American people in general about the scope and diversity of the research and technology activities. Additionally, the report will enable the reader to know how these goals are being addressed.

The Technology of LiFi: A Brief Introduction

NASA Astrophysics Data System (ADS)

Ramadhani, E.; Mahardika, G. P.

2018-03-01

Light Fidelity (LiFi) is a Visible Light Communication (VLC) based technology that making a light as a media of communication replacing the cable wire communication. LiFi is evolve to overcome the rate speed in WiFi, while using LiFi the rate speed can reach until 14 Gbps. This paper presents an introduction of the LiFi technology including the architecture, modulation, performance, and the challenges. The result of this paper can be used as a reference and knowledge to develop some of the LiFi technology.

Sequencing technologies - the next generation.

PubMed

Metzker, Michael L

2010-01-01

Demand has never been greater for revolutionary technologies that deliver fast, inexpensive and accurate genome information. This challenge has catalysed the development of next-generation sequencing (NGS) technologies. The inexpensive production of large volumes of sequence data is the primary advantage over conventional methods. Here, I present a technical review of template preparation, sequencing and imaging, genome alignment and assembly approaches, and recent advances in current and near-term commercially available NGS instruments. I also outline the broad range of applications for NGS technologies, in addition to providing guidelines for platform selection to address biological questions of interest.

Supersonics Project - Airport Noise Tech Challenge

NASA Technical Reports Server (NTRS)

Bridges, James

2010-01-01

The Airport Noise Tech Challenge research effort under the Supersonics Project is reviewed. While the goal of "Improved supersonic jet noise models validated on innovative nozzle concepts" remains the same, the success of the research effort has caused the thrust of the research to be modified going forward in time. The main activities from FY06-10 focused on development and validation of jet noise prediction codes. This required innovative diagnostic techniques to be developed and deployed, extensive jet noise and flow databases to be created, and computational tools to be developed and validated. Furthermore, in FY09-10 systems studies commissioned by the Supersonics Project showed that viable supersonic aircraft were within reach using variable cycle engine architectures if exhaust nozzle technology could provide 3-5dB of suppression. The Project then began to focus on integrating the technologies being developed in its Tech Challenge areas to bring about successful system designs. Consequently, the Airport Noise Tech Challenge area has shifted efforts from developing jet noise prediction codes to using them to develop low-noise nozzle concepts for integration into supersonic aircraft. The new plan of research is briefly presented by technology and timelines.

Confinement-induced Molecular Templating and Controlled Ligation

NASA Astrophysics Data System (ADS)

Berard, Daniel; Shayegan, Marjan; Michaud, François; Henkin, Gil; Scott, Shane; Leith, Jason; Leslie, Sabrina; Leslie Lab Team

Loading and manipulating long DNA molecules within sub-50 nm cross-section nanostructures for genomic and biochemical analyses, while retaining their structural integrity, present key technological challenges to the biotechnology sector, such as device clogging and molecular breakage. We overcome these challenges by using Convex Lens-induced Confinement (CLiC) technology to gently load DNA into nanogrooves from above. Here, we demonstrate single-fluorophore visualization of custom DNA barcodes as well as efficient top-loading of DNA into sub-50 nm nanogrooves of variable topographies. We study confinement-enhanced self-ligation of polymers loaded in circular nanogrooves. Further, we use concentric, circular nanogrooves to eliminate confinement gradient-induced drift of stretched DNA.

Rogue athletes and recombinant DNA technology: challenges for doping control.

PubMed

Azzazy, Hassan M E; Mansour, Mai M H

2007-10-01

The quest for athletic excellence holds no limit for some athletes, and the advances in recombinant DNA technology have handed these athletes the ultimate doping weapons: recombinant proteins and gene doping. Some detection methods are now available for several recombinant proteins that are commercially available as pharmaceuticals and being abused by dopers. However, researchers are struggling to come up with efficient detection methods in preparation for the imminent threat of gene doping, expected in the 2008 Olympics. This Forum article presents the main detection strategies for recombinant proteins and the forthcoming detection strategies for gene doping as well as the prime analytical challenges facing them.

Verification, Validation, and Accreditation Challenges of Distributed Simulation for Space Exploration Technology

NASA Technical Reports Server (NTRS)

Thomas, Danny; Hartway, Bobby; Hale, Joe

2006-01-01

Throughout its rich history, NASA has invested heavily in sophisticated simulation capabilities. These capabilities reside in NASA facilities across the country - and with partners around the world. NASA s Exploration Systems Mission Directorate (ESMD) has the opportunity to leverage these considerable investments to resolve technical questions relating to its missions. The distributed nature of the assets, both in terms of geography and organization, present challenges to their combined and coordinated use, but precedents of geographically distributed real-time simulations exist. This paper will show how technological advances in simulation can be employed to address the issues associated with netting NASA simulation assets.

Facing the Challenges--Using Information and Communications Technology To Support Teaching and Learning.

ERIC Educational Resources Information Center

Heaney, Liam

2003-01-01

This article explores some of the key issues associated with the use of information and communications technology (ICT) in the classroom. To illustrate ICT integration, a teaching project on dinosaurs, which has been developed with students ages 10-11, is presented. A detailed scheme of work and lesson plans is included. (Contains 4 references.)…

Proceedings of Selected Research and Development Papers Presented at the National Convention of the Association for Educational Communications and Technology [AECT] (21st, Houston, Texas, February 10-14, 1999).

ERIC Educational Resources Information Center

Sparks, Kristin E., Ed.; Simonson, Michael, Ed.

1999-01-01

Subjects addressed by the 65 papers in this proceedings include: challenges for emerging instructional designers; instructional technology clinical experience; color coding and field dependence; effects of visualization on cognitive development; effects of learning structure and summarization during computer-based instruction; individually-guided…

The PartoPen: Using Digital Pen Technology to Improve Maternal Labor Monitoring in the Developing World

ERIC Educational Resources Information Center

Underwood, Heather Marie

2013-01-01

This dissertation presents the PartoPen, a new approach to addressing maternal labor monitoring challenges in developing countries. The PartoPen is a hardware and software system that uses digital pen technology to enhance, rather than replace, the paper-based labor monitoring tool known as the partograph. In the developing world, correct use of…

Financing Information Communication Technology Projects in Secondary Schools E-Learning: A Case of Mombasa County, Kenya

ERIC Educational Resources Information Center

Wangila, Violet Muyoka

2015-01-01

Information communication and technology (ICTs) has become common place entities in all aspects of life. Within the education sector, ICT has begun to have a special attention although not extensively as in other fields both globally and locally. Limited funds still presents a challenge in rolling out the e-school projects in Kenyan secondary…

Using a Touch-Based, Computer-Assisted Learning System to Promote Literacy and Math Skills for Low-Income Preschoolers

ERIC Educational Resources Information Center

McManis, Mark H.; McManis, Lilla Dale

2016-01-01

The use of touch-based technologies by young children to improve academic skills has seen growth outpacing empirical evidence of its effectiveness. Due to the educational challenges low-income children face, the stakes for providing instructional technology with demonstrated efficacy are high. The current work presents an empirical study of the…

New plastic recycling technology | Science Inventory | US EPA

EPA Pesticide Factsheets

Greater than 60% of the total plastic content of municipal solid waste is comprised of polyolefins (high-density, low-density, and linear polyethylene and polypropylene. Polyethylene (PE) is the largest-volume component but presents a challenge due to the absence of low-energy degradation processes. This news column provides a digest of recent technical reports relating to clean technology and environmental policy,

Interpreting Experiences of Teachers Using Online Technologies to Interact with Teachers in Blended Tertiary Environments: A Phenomenological Study

ERIC Educational Resources Information Center

Tuapawa, Kimberley

2017-01-01

This research made a phenomenological interpretation of key stakeholders' experiences with educational online technologies (EOT), to determine their present EOT needs and challenges and provide a basis from which to propose methods for effective EOT support. It analysed the EOT experiences of 10 students and 10 teachers from New Zealand and…

Technology test bed review

NASA Technical Reports Server (NTRS)

Mcconnaughey, H. V.

1992-01-01

The topics are presented in viewgraph form and include the following: (1) Space Shuttle Main Engine (SSME) technology test bed (TTB) history; (2) TTB objectives; (3) TTB major accomplishments; (4) TTB contributions to SSME; (5) major impacts of 3001 testing; (6) some challenges to computational fluid dynamics (CFD); (7) the high pressure fuel turbopump (HPFTP); and (8) 3001 lessons learned in design and operations.

Recent advances in medical device triage technologies for chemical, biological, radiological, and nuclear events.

PubMed

Lansdowne, Krystal; Scully, Christopher G; Galeotti, Loriano; Schwartz, Suzanne; Marcozzi, David; Strauss, David G

2015-06-01

In 2010, the US Food and Drug Administration (Silver Spring, Maryland USA) created the Medical Countermeasures Initiative with the mission of development and promoting medical countermeasures that would be needed to protect the nation from identified, high-priority chemical, biological, radiological, or nuclear (CBRN) threats and emerging infectious diseases. The aim of this review was to promote regulatory science research of medical devices and to analyze how the devices can be employed in different CBRN scenarios. Triage in CBRN scenarios presents unique challenges for first responders because the effects of CBRN agents and the clinical presentations of casualties at each triage stage can vary. The uniqueness of a CBRN event can render standard patient monitoring medical device and conventional triage algorithms ineffective. Despite the challenges, there have been recent advances in CBRN triage technology that include: novel technologies; mobile medical applications ("medical apps") for CBRN disasters; electronic triage tags, such as eTriage; diagnostic field devices, such as the Joint Biological Agent Identification System; and decision support systems, such as the Chemical Hazards Emergency Medical Management Intelligent Syndromes Tool (CHEMM-IST). Further research and medical device validation can help to advance prehospital triage technology for CBRN events.

Enhancing audiovisual experience with haptic feedback: a survey on HAV.

PubMed

Danieau, F; Lecuyer, A; Guillotel, P; Fleureau, J; Mollet, N; Christie, M

2013-01-01

Haptic technology has been widely employed in applications ranging from teleoperation and medical simulation to art and design, including entertainment, flight simulation, and virtual reality. Today there is a growing interest among researchers in integrating haptic feedback into audiovisual systems. A new medium emerges from this effort: haptic-audiovisual (HAV) content. This paper presents the techniques, formalisms, and key results pertinent to this medium. We first review the three main stages of the HAV workflow: the production, distribution, and rendering of haptic effects. We then highlight the pressing necessity for evaluation techniques in this context and discuss the key challenges in the field. By building on existing technologies and tackling the specific challenges of the enhancement of audiovisual experience with haptics, we believe the field presents exciting research perspectives whose financial and societal stakes are significant.

Teleglaucoma: improving access and efficiency for glaucoma care.

PubMed

Kassam, Faazil; Yogesan, Kanagasingam; Sogbesan, Enitan; Pasquale, Louis R; Damji, Karim F

2013-01-01

Teleglaucoma is the application of telemedicine for glaucoma. We review and present the current literature on teleglaucoma; present our experience with teleglaucoma programs in Alberta, Canada and Western Australia; and discuss the challenges and opportunities in this emerging field. Teleglaucoma is a novel area that was first explored a little over a decade ago and early studies highlighted the technical challenges of delivering glaucoma care remotely. Advanced technologies have since emerged that show great promise in providing access to underserviced populations. Additionally, these technologies can improve the efficiency of healthcare systems burdened with an increasing number of patients with glaucoma, and a limited supply of ophthalmologists. Additional benefits of teleglaucoma systems include e-learning and e-research. Further work is needed to fully validate and study the cost and comparative effectiveness of this approach relative to traditional models of healthcare.

Teleglaucoma: Improving Access and Efficiency for Glaucoma Care

PubMed Central

Kassam, Faazil; Yogesan, Kanagasingam; Sogbesan, Enitan; Pasquale, Louis R.; Damji, Karim F.

2013-01-01

Teleglaucoma is the application of telemedicine for glaucoma. We review and present the current literature on teleglaucoma; present our experience with teleglaucoma programs in Alberta, Canada and Western Australia; and discuss the challenges and opportunities in this emerging field. Teleglaucoma is a novel area that was first explored a little over a decade ago and early studies highlighted the technical challenges of delivering glaucoma care remotely. Advanced technologies have since emerged that show great promise in providing access to underserviced populations. Additionally, these technologies can improve the efficiency of healthcare systems burdened with an increasing number of patients with glaucoma, and a limited supply of ophthalmologists. Additional benefits of teleglaucoma systems include e-learning and e-research. Further work is needed to fully validate and study the cost and comparative effectiveness of this approach relative to traditional models of healthcare. PMID:23741133

Employing Earned Value Management in Government Research and Design - Lessons Learned from the Trenches

NASA Technical Reports Server (NTRS)

Simon, Tom

2009-01-01

To effectively manage a project, the project manager must have a plan, understand the current conditions, and be able to take action to correct the course when challenges arise. Research and design projects face technical, schedule, and budget challenges that make it difficult to utilize project management tools developed for projects based on previously demonstrated technologies. Projects developing new technologies by their inherent nature are trying something new and thus have little to no data to support estimates for schedule and cost, let alone the technical outcome. Projects with a vision for the outcome but little confidence in the exact tasks to accomplish in order to achieve the vision incur cost and schedule penalties when conceptual solutions require unexpected iterations or even a reinvention of the plan. This presentation will share the project management methodology and tools developed through trial and error for a NASA research and design project combining industry, academia, and NASA inhouse work in which Earned Value Management principles were employed but adapted for the reality of the government financial system and the reality of challenging technology development. The priorities of the presented methodology are flexibility, accountability, and simplicity to give the manager tools to help deliver to the customer while not using up valuable time and resources on extensive planning and analysis. This presentation will share the methodology, tools, and work through failed and successful examples from the three years of process evolution.

Pointing and control system enabling technology for future automated space missions

NASA Technical Reports Server (NTRS)

Dahlgren, J. B.

1978-01-01

Future automated space missions present challenging opportunities in the pointing-and-control technology disciplines. The enabling pointing-and-control system technologies for missions from 1985 to the year 2000 were identified and assessed. A generic mission set including Earth orbiter, planetary, and other missions which predominantly drive the pointing-and-control requirements was selected for detailed evaluation. Technology candidates identified were prioritized as planning options for future NASA-OAST advanced development programs. The primary technology thrusts in each candidate program were cited, and advanced development programs in pointing-and-control were recommended for the FY 80 to FY 87 period, based on these technology thrusts.

Fiberoptic sensors for rocket engine applications

NASA Technical Reports Server (NTRS)

Ballard, R. O.

1992-01-01

A research effort was completed to summarize and evaluate the current level of technology in fiberoptic sensors for possible applications in integrated control and health monitoring (ICHM) systems in liquid propellant engines. The environment within a rocket engine is particuarly severe with very high temperatures and pressures present combined with extremely rapid fluid and gas flows, and high-velocity and high-intensity acoustc waves. Application of fiberoptic technology to rocket engine health monitoring is a logical evolutionary step in ICHM development and presents a significant challenge. In this extremely harsh environment, the additional flexibility of fiberoptic techniques to augment conventional sensor technologies offer abundant future potential.

Harnessing Innovative Technologies to Advance Children’s Mental Health: Behavioral Parent Training As an Example

PubMed Central

Jones, Deborah J.; Forehand, Rex; Cuellar, Jessica; Kincaid, Carlye; Parent, Justin; Fenton, Nicole; Goodrum, Nada

2012-01-01

Disruptive behaviors of childhood are among the most common reasons for referral of children to mental health professionals. Behavioral parent training (BPT) is the most efficacious intervention for these problem behaviors, yet BPT is substantially underutilized beyond university research and clinic settings. With the aim of addressing this research-to-practice gap, this article highlights the considerable, but largely unrealized, potential for technology to overcome the two most pressing challenges hindering the diffusion of BPT: (1). The dearth of BPT training and supervision opportunities for therapists who work with families of children with disruptive behaviors and; (2). The failure to engage and retain families in BPT services when services are available. To this end, this review presents a theoretical framework to guide technological innovations in BPT and highlights examples of how technology is currently being harnessed to overcome these challenges. This review also discusses recommendations for using technology as a delivery vehicle to further advance the field of BPT and the potential implications of technological innovations in BPT for other areas of children’s mental health are discussed. PMID:23313761

Ethical considerations of research policy for personal genome analysis: the approach of the Genome Science Project in Japan.

PubMed

Minari, Jusaku; Shirai, Tetsuya; Kato, Kazuto

2014-12-01

As evidenced by high-throughput sequencers, genomic technologies have recently undergone radical advances. These technologies enable comprehensive sequencing of personal genomes considerably more efficiently and less expensively than heretofore. These developments present a challenge to the conventional framework of biomedical ethics; under these changing circumstances, each research project has to develop a pragmatic research policy. Based on the experience with a new large-scale project-the Genome Science Project-this article presents a novel approach to conducting a specific policy for personal genome research in the Japanese context. In creating an original informed-consent form template for the project, we present a two-tiered process: making the draft of the template following an analysis of national and international policies; refining the draft template in conjunction with genome project researchers for practical application. Through practical use of the template, we have gained valuable experience in addressing challenges in the ethical review process, such as the importance of sharing details of the latest developments in genomics with members of research ethics committees. We discuss certain limitations of the conventional concept of informed consent and its governance system and suggest the potential of an alternative process using information technology.

Life Support Requirements and Challenges for NASA's Constellation Program

NASA Technical Reports Server (NTRS)

Carasquillo, Robyn

2007-01-01

NASA's Constellation Program, which includes the mission objectives of establishing a permanently-manned lunar Outpost, and the exploration of Mars, poses new and unique challenges for human life support systems that will require solutions beyond the Shuttle and International Space Station state of the art systems. In particular, the requirement to support crews for 210 days duration at the lunar outpost with limited resource resupply capability wilt require closed-loop regenerative life support systems with minimal expendables. Planetary environmental conditions such as lunar dust and extreme temperatures, as well as the capability to support frequent and extended-duration EVA's will be particularly challenging. This presentation will summarize the key program and mission life support requirements for the Constellation Program and the unique challenges they present for technology and architecture development.

Improving Project Management Using Formal Models and Architectures

NASA Technical Reports Server (NTRS)

Kahn, Theodore; Sturken, Ian

2011-01-01

This talk discusses the advantages formal modeling and architecture brings to project management. These emerging technologies have both great potential and challenges for improving information available for decision-making. The presentation covers standards, tools and cultural issues needing consideration, and includes lessons learned from projects the presenters have worked on.

It's Not All about Video-Conferencing

ERIC Educational Resources Information Center

Stodberg, Ulf; Orre, Carl Johan

2010-01-01

Purpose: This paper seeks to present the issue of e-learning development in a public university in Bolivia, together with challenges that could support the work of a sustainable development of practice and educational technologies. Design/methodology/approach: The paper presents the first phase of an interpretative case study. It comprises data…

The savory method can not green deserts or reverse climate change

USDA-ARS?s Scientific Manuscript database

Mr. Allan Savory addressed one of the major environmental challenges of our time – rapidly increasing atmospheric CO2 concentrations and climate warming - in a video presentation entitled, "How to green the world's deserts and reverse climate change" that was presented at the 2013 TED (Technology, E...

Making Advanced Computer Science Topics More Accessible through Interactive Technologies

ERIC Educational Resources Information Center

Shao, Kun; Maher, Peter

2012-01-01

Purpose: Teaching advanced technical concepts in a computer science program to students of different technical backgrounds presents many challenges. The purpose of this paper is to present a detailed experimental pedagogy in teaching advanced computer science topics, such as computer networking, telecommunications and data structures using…

Biomaterials for tissue engineering: summary

NASA Technical Reports Server (NTRS)

Christenson, L.; Mikos, A. G.; Gibbons, D. F.; Picciolo, G. L.; McIntire, L. V. (Principal Investigator)

1997-01-01

This article summarizes presentations and discussion at the workshop "Enabling Biomaterial Technology for Tissue Engineering," which was held during the Fifth World Biomaterials Congress in May 1996. Presentations covered the areas of material substrate architecture, barrier effects, and cellular response, including analysis of biomaterials challenges involved in producing specific tissue-engineered products.

Graphic Organizers or Graphic Overviews? Presentation Order Effects with Computer-Based Text

ERIC Educational Resources Information Center

Shaw, Shana; Nihalani, Priya; Mayrath, Michael; Robinson, Daniel H.

2012-01-01

It has long been assumed that graphic organizers (GOs) should be presented to students following text as an organizer, rather than preceding text as an overview. Robinson et al. ("Educational Technology Research & Development," 51(4), 25-41, 2003) challenged this assumption by finding support for GOs as an overview. The present study further…

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

"WordSift": Supporting Instruction and Learning through Technology in San Francisco. The Senior Urban Education Research Fellowship Series. Volume IV

ERIC Educational Resources Information Center

Hakuta, Kenji

2011-01-01

In developing a tool to help address academic language development, the author and his team began by identifying the challenges of presenting science text to English Language Learners and students who struggle with reading. The goal was to balance the practical and logistical challenges of identifying, teaching, and learning academic and content…

Enabled Masses: Challenge and Trust within Modern Social Networks

DTIC Science & Technology

2013-03-01

maintaining the data needed , and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of...mobile technology presents a challenge to future operations in terms of increased scrutiny. Senior military leaders need to understand and appreciate...increased scrutiny. Senior military leaders need to understand and appreciate the human processes underlying social networks as well as why this

Constellation Program Design Challenges as Opportunities for Educational Outreach and Workforce Development for Senior Design Classes

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2009-01-01

The Texas Space Grant Consortium (TSGC) and the Exploration Systems Mission Directorate (ESMD) both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and researchers as real design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, results and metrics are presented on the NASA Design Challenge Program.

Constellation Program Design Challenges as Opportunities for Educational Outreach- Lessons Learned

NASA Technical Reports Server (NTRS)

Trevino, Robert C.

2010-01-01

The Texas Space Grant Consortium (TSGC) and the NASA Exploration Systems Mission Directorate (ESMD) Education Office both have programs that present design challenges for university senior design classes that offer great opportunities for educational outreach and workforce development. These design challenges have been identified by NASA engineers and scientists as actual design problems faced by the Constellation Program in its exploration missions and architecture. Student teams formed in their senior design class select and then work on a design challenge for one or two semesters. The senior design class follows the requirements set by their university, but it must also comply with the Accreditation Board for Engineering and Technology (ABET) in order to meet the class academic requirements. Based on a one year fellowship at a TSGC university under the NASA Administrator's Fellowship Program (NAFP) and several years of experience, lessons learned are presented on the NASA Design Challenge Program.

What Futurists Believe: Implications for Home Economists.

ERIC Educational Resources Information Center

Berenbaum, Shawna

1992-01-01

The challenges that the future will present to the home economist will be many. Technological, scientific, economic, environmental, climatic, social, political, institutional, and personal pressures will cause changes that will be favorable and unfavorable. (JOW)

Development of hand-held thermographic inspection technologies.

DOT National Transportation Integrated Search

2009-08-01

Subsurface deterioration in concrete structures presents a significant challenge for inspection and maintenance engineers. Cracking, delaminations and spalling that can occur as a result of corrosion of embedded reinforcing steel can lead to pot hole...

Liquid Chromatography Mass Spectrometry-Based Proteomics: Biological and Technological Aspects

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karpievitch, Yuliya V.; Polpitiya, Ashoka D.; Anderson, Gordon A.

2010-12-01

Mass spectrometry-based proteomics has become the tool of choice for identifying and quantifying the proteome of an organism. Though recent years have seen a tremendous improvement in instrument performance and the computational tools used, significant challenges remain, and there are many opportunities for statisticians to make important contributions. In the most widely used "bottom-up" approach to proteomics, complex mixtures of proteins are first subjected to enzymatic cleavage, the resulting peptide products are separated based on chemical or physical properties and analyzed using a mass spectrometer. The two fundamental challenges in the analysis of bottom-up MS-based proteomics are: (1) Identifying themore » proteins that are present in a sample, and (2) Quantifying the abundance levels of the identified proteins. Both of these challenges require knowledge of the biological and technological context that gives rise to observed data, as well as the application of sound statistical principles for estimation and inference. We present an overview of bottom-up proteomics and outline the key statistical issues that arise in protein identification and quantification.« less

The U.K. Pushes the Boundaries of Bionics: Researchers and Engineers Are Making Great Strides Toward Advanced Prosthetics' Ultimate Goal-Mimicking the Functionality of a Real Limb.

PubMed

Banks, Jim

2016-01-01

Using state-of-the-art technology, athletes at the Paralympic Games achieve great feats of physical prowess, but for most people using assistive and rehabilitative technologies (ART), even simple tasks can present huge challenges. Many do not make full use of the technology available to them because it is unreliable, uncomfortable, and nonintuitive, so researchers are pushing the envelope to create practical solutions that function like real limbs.

Meeting today's challenges to supply tomorrow's energy. Clean fossil energy technical and policy seminar

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2005-07-01

Papers discussed the coal policy of China, Russia, Indonesia and Vietnam; clean coal technology (small-scale coal power plants, carbon capture and sequestration, new coking process SCOPE21, coal gasification (HyPr-RING), CO{sub 2} reduction technology, Supercritical coal-fired units and CFB boilers, EAGLE project, coal liquefaction), the coal consumer's view of clean fossil energy policy, and natural gas policy and technology. Some of the papers only consist of the presentation overheads/viewgraphs.

The Ocean in Depth - Ideas for Using Marine Technology in Science Communication

NASA Astrophysics Data System (ADS)

Gerdes, A.

2009-04-01

By deploying camera and video systems on remotely operated diving vehicles (ROVs), new and fascinating insights concerning the functioning of deep ocean ecosystems like cold-water coral reef communities can be gained. Moreover, mapping hot vents at mid-ocean ridge locations, and exploring asphalt and mud volcanoes in the Gulf of Mexico and the Mediterranean Sea with the aid of video camera systems have illustrated the scientific value of state-of-the-art diving tools. In principle, the deployment of sophisticated marine technology on seagoing expeditions and their results - video tapes and photographs of fascinating submarine environments, publication of new scientific findings - offer unique opportunities for communicating marine sciences. Experience shows that an interest in marine technology can easily be stirred in laypersons if the deployment of underwater vehicles such as ROVs during seagoing expeditions can be presented using catchwords like "discovery", "new frontier", groundbreaking mission", etc. On the other hand, however, a number of restrictions and challenges have to be kept in mind. Communicating marine science in general, and the achievements of marine technology in particular, can only be successful with the application of a well-defined target-audience concept. While national and international TV stations and production companies are very much interested in using high quality underwater video footage, the involvement of journalists and camera teams in seagoing expeditions entails a number a challenges: berths onboard research vessels are limited; safety aspects have to be considered; copyright and utilisation questions of digitalized video and photo material has to be handled with special care. To cite one example: on-board video material produced by professional TV teams cannot be used by the research institute that operated the expedition. This presentation aims at (1)informing members of the scientific community about new opportunities related to marine technology, (2)discussing challenges and limitations in cooperative projects with media,(3) presenting new ways of marketing scientific findings, (4) promoting the interest of the media present at the EGU09 conference in cooperating with research institutes.

Material Challenges and Opportunities for Commercial Electric Aircraft

NASA Technical Reports Server (NTRS)

Misra, Ajay

2014-01-01

Significant reduction in carbon dioxide emission for future air transportation system will require adoption of electric propulsion system and more electric architectures. Various options for aircraft electric propulsion include hybrid electric, turboelectric, and full electric system. Realization of electric propulsion system for commercial aircraft applications will require significant increases in power density of electric motors and energy density of energy storage system, such as the batteries and fuel cells. In addition, transmission of MW of power in the aircraft will require high voltage power transmission system to reduce the weight of the power transmission system. Finally, there will be significant thermal management challenges. Significant advances in material technologies will be required to meet these challenges. Technologies of interest include materials with higher electrical conductivity than Cu, high thermal conductivity materials, and lightweight electrically insulating materials with high breakdown voltage, high temperature magnets, advanced battery and fuel cell materials, and multifunctional materials. The presentation will include various challenges for commercial electric aircraft and provide an overview of material improvements that will be required to meet these challenges.

Modernization of the Cassini Ground System

NASA Technical Reports Server (NTRS)

Razo, Gus; Fujii, Tammy J.

2014-01-01

The Cassini Spacecraft and its ground system have been operational for over 16 years. Modernization presents several challenges due to the personnel, processes, and tools already invested and embedded into the current ground system structure. Every mission's ground system has its own unique complexities and challenges, involving various organizational units. As any mission from its inception to its execution, schedules are always tight. This forces GDS engineers to implement a working ground system that is not necessarily fully optimized. Ground system challenges increase as technology evolves and cyber threats become more sophisticated. Cassini's main challenges were due to its ground system existing before many security requirements were levied on the multi-mission tools and networks. This caused a domino effect on Cassini GDS tools that relied on outdated technological features. In the aerospace industry reliable and established technology is preferred over innovative yet less proven technology. Loss of data for a spacecraft mission can be catastrophic; therefore, there is a reluctance to make changes and updates to the ground system. Nevertheless, all missions and associated teams face the need to modernize their processes and tools. Systems development methods from well-known system analysis and design principles can be applied to many missions' ground systems. Modernization should always be considered, but should be done in such a way that it does not affect flexibility nor interfere with established practices. Cassini has accomplished a secure and efficient ground data system through periodic updates. The obstacles faced while performing the modernization of the Cassini ground system will be outlined, as well as the advantages and challenges that were encountered.

Spin-transfer torque magnetoresistive random-access memory technologies for normally off computing (invited)

NASA Astrophysics Data System (ADS)

Ando, K.; Fujita, S.; Ito, J.; Yuasa, S.; Suzuki, Y.; Nakatani, Y.; Miyazaki, T.; Yoda, H.

2014-05-01

Most parts of present computer systems are made of volatile devices, and the power to supply them to avoid information loss causes huge energy losses. We can eliminate this meaningless energy loss by utilizing the non-volatile function of advanced spin-transfer torque magnetoresistive random-access memory (STT-MRAM) technology and create a new type of computer, i.e., normally off computers. Critical tasks to achieve normally off computers are implementations of STT-MRAM technologies in the main memory and low-level cache memories. STT-MRAM technology for applications to the main memory has been successfully developed by using perpendicular STT-MRAMs, and faster STT-MRAM technologies for applications to the cache memory are now being developed. The present status of STT-MRAMs and challenges that remain for normally off computers are discussed.

National Algal Biofuels Technology Roadmap

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferrell, John; Sarisky-Reed, Valerie

The framework for National Algal Biofuels Technology Roadmap was constructed at the Algal Biofuels Technology Roadmap Workshop, held December 9-10, 2008, at the University of Maryland-College Park. The Workshop was organized by the Biomass Program to discuss and identify the critical challenges currently hindering the development of a domestic, commercial-scale algal biofuels industry. This Roadmap presents information from a scientific, economic, and policy perspectives that can support and guide RD&D investment in algal biofuels. While addressing the potential economic and environmental benefits of using algal biomass for the production of liquid transportation fuels, the Roadmap describes the current status ofmore » algae RD&D. In doing so, it lays the groundwork for identifying challenges that likely need to be overcome for algal biomass to be used in the production of economically viable biofuels.« less

Augmented Reality Based Doppler Lidar Data Visualization: Promises and Challenges

NASA Astrophysics Data System (ADS)

Cherukuru, N. W.; Calhoun, R.

2016-06-01

Augmented reality (AR) is a technology in which the enables the user to view virtual content as if it existed in real world. We are exploring the possibility of using this technology to view radial velocities or processed wind vectors from a Doppler wind lidar, thus giving the user an ability to see the wind in a literal sense. This approach could find possible applications in aviation safety, atmospheric data visualization as well as in weather education and public outreach. As a proof of concept, we used the lidar data from a recent field campaign and developed a smartphone application to view the lidar scan in augmented reality. In this paper, we give a brief methodology of this feasibility study, present the challenges and promises of using AR technology in conjunction with Doppler wind lidars.

Optical Measurements for Intelligent Aerospace Propulsion

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.

2003-01-01

There is growing interest in applying intelligent technologies to aerospace propulsion systems to reap expected benefits in cost, performance, and environmental compliance. Cost benefits span the engine life cycle from development, operations, and maintenance. Performance gains are anticipated in reduced fuel consumption, increased thrust-toweight ratios, and operability. Environmental benefits include generating fewer pollutants and less noise. Critical enabling technologies to realize these potential benefits include sensors, actuators, logic, electronics, materials, and structures. For propulsion applications, the challenge is to increase the robustness of these technologies so that they can withstand harsh temperatures, vibrations, and grime while providing extremely reliable performance. This paper addresses the role that optical metrology is playing in providing solutions to these challenges. Optics for ground-based testing (development cycle), flight sensing (operations), and inspection (maintenance) are described. Opportunities for future work are presented.

Capacitive Feedthroughs for Medical Implants

PubMed Central

Grob, Sven; Tass, Peter A.; Hauptmann, Christian

2016-01-01

Important technological advances in the last decades paved the road to a great success story for electrically stimulating medical implants, including cochlear implants or implants for deep brain stimulation. However, there are still many challenges in reducing side effects and improving functionality and comfort for the patient. Two of the main challenges are the wish for smaller implants on one hand, and the demand for more stimulation channels on the other hand. But these two aims lead to a conflict of interests. This paper presents a novel design for an electrical feedthrough, the so called capacitive feedthrough, which allows both reducing the size, and increasing the number of included channels. Capacitive feedthroughs combine the functionality of a coupling capacitor and an electrical feedthrough within one and the same structure. The paper also discusses the progress and the challenges of the first produced demonstrators. The concept bears a high potential in improving current feedthrough technology, and could be applied on all kinds of electrical medical implants, even if its implementation might be challenging. PMID:27660602

Capacitive Feedthroughs for Medical Implants.

PubMed

Grob, Sven; Tass, Peter A; Hauptmann, Christian

2016-01-01

Important technological advances in the last decades paved the road to a great success story for electrically stimulating medical implants, including cochlear implants or implants for deep brain stimulation. However, there are still many challenges in reducing side effects and improving functionality and comfort for the patient. Two of the main challenges are the wish for smaller implants on one hand, and the demand for more stimulation channels on the other hand. But these two aims lead to a conflict of interests. This paper presents a novel design for an electrical feedthrough, the so called capacitive feedthrough, which allows both reducing the size, and increasing the number of included channels. Capacitive feedthroughs combine the functionality of a coupling capacitor and an electrical feedthrough within one and the same structure. The paper also discusses the progress and the challenges of the first produced demonstrators. The concept bears a high potential in improving current feedthrough technology, and could be applied on all kinds of electrical medical implants, even if its implementation might be challenging.

Venus Surface Sample Return: A Weighty High-Pressure Challenge

NASA Technical Reports Server (NTRS)

Sweetser, Ted; Cameron, Jonathon; Chen, Gun-Shing; Cutts, Jim; Gershman, Bob; Gilmore, Martha S.; Hall, Jeffrey L.; Kerzhanovich, Viktor; McRonald, Angus; Nilsen, Erik

1999-01-01

A mission to return a sample to Earth from the surface of Venus faces a multitude of multidisciplinary challenges. In addition to the complications inherent in any sample return mission, Venus presents the additional difficulties of a deep gravity well essentially equivalent to Earth's and a hot-house atmosphere which generates extremes of high temperature, density, and pressure unmatched at any other known surface in the solar system. The Jet Propulsion Laboratory of the California Institute of Technology recently conducted a study to develop an architecture for such a mission; a major goal of this study was to identify technology developments which would need to be pursued in order to make such a mission feasible at a cost much less than estimated in previous. The final design of this mission is years away but the study results presented here show our current mission architecture as it applies to a particular mission opportunity, give a summary of the engineering and science trades which were made in the process of developing it, and identify the main technology development efforts needed.

Phytoextraction of Cd-Contaminated Soils: Current Status and Future Challenges.

PubMed

Li, Jin-Tian; Baker, Alan J M; Ye, Zhi-Hong; Wang, Hong-Bin; Shu, Wen-Sheng

2012-10-01

Cadmium (Cd) is one of the most toxic and widely distributed pollutants in the environment. Cadmium contamination of soils has posed a serious threat to safe food production in many parts of the world. The authors present a comprehensive review of present status of phytoextraction technology for cleaning up Cd-contaminated soils, based primarily on the data resulting from both laboratory and field-scale studies that have been conducted to assess or improve the Cd phytoextraction potential of various plant species in the past decade. The encouraging results of field-scale studies have provided a fundamental basis to usher phytoextraction technology into practical use to remediate slightly to moderately Cd-contaminated soils in Europe and Asia, although this technology is not yet ready for widespread application. Chelators and microorganisms tested so far seem not to contribute to the applicability of Cd phytoextraction. The major challenges for the large-scale application of Cd phytoextraction are (a) how to further improve the efficiency of Cd phytoextraction, (b) how to cut the overall costs of Cd phytoextraction, and (c) how to get greater stakeholders' acceptance of Cd phytoextraction as a reliable option.

Challenges in Commercializing Biomimetic Membranes

PubMed Central

Perry, Mark; Madsen, Steen Ulrik; Jørgensen, Tine; Braekevelt, Sylvie; Lauritzen, Karsten; Hélix-Nielsen, Claus

2015-01-01

The discovery of selective water channel proteins—aquaporins—has prompted growing interest in using these proteins, as the building blocks for designing new types of membranes. However, as with any other new and potentially disruptive technology, barriers for successful market entry exist. One category includes customer-related barriers, which can be influenced to some extent. Another category includes market-technical-related barriers, which can be very difficult to overcome by an organization/company aiming at successfully introducing their innovation on the market—in particular if both the organization and the technology are at early stages. Often, one faces barriers from both these categories at the same time, which makes it necessary to gain insight of the particular market when introducing a new innovative product. In this review we present the basic concepts and discuss some of these barriers and challenges associated with introducing biomimetic aquaporin membranes. These include technical issues in membrane production and product testing. Then we discuss possible business models for introducing new technologies in general, followed by a presentation of beach-head market segments relevant for biomimetic aquaporin membranes. PMID:26556379

Challenges in Commercializing Biomimetic Membranes.

PubMed

Perry, Mark; Madsen, Steen Ulrik; Jørgensen, Tine; Braekevelt, Sylvie; Lauritzen, Karsten; Hélix-Nielsen, Claus

2015-11-05

The discovery of selective water channel proteins-aquaporins-has prompted growing interest in using these proteins, as the building blocks for designing new types of membranes. However, as with any other new and potentially disruptive technology, barriers for successful market entry exist. One category includes customer-related barriers, which can be influenced to some extent. Another category includes market-technical-related barriers, which can be very difficult to overcome by an organization/company aiming at successfully introducing their innovation on the market-in particular if both the organization and the technology are at early stages. Often, one faces barriers from both these categories at the same time, which makes it necessary to gain insight of the particular market when introducing a new innovative product. In this review we present the basic concepts and discuss some of these barriers and challenges associated with introducing biomimetic aquaporin membranes. These include technical issues in membrane production and product testing. Then we discuss possible business models for introducing new technologies in general, followed by a presentation of beach-head market segments relevant for biomimetic aquaporin membranes.

The use of technology in Suicide Prevention.

PubMed

Larsen, Mark E; Cummins, Nicholas; Boonstra, Tjeerd W; O'Dea, Bridianne; Tighe, Joe; Nicholas, Jennifer; Shand, Fiona; Epps, Julien; Christensen, Helen

2015-01-01

Suicide is one of the leading causes of death globally, and is notably a significant cause of death amongst young people. A suicide outcome is a complex combination of personal, social, and health factors, and therefore suicide prevention is a challenge, requiring a systems approach incorporating public health strategies, screening at-risk individuals, targeted interventions, and follow-up for suicide survivors and those bereaved by suicide. Engineering practice has been implicated in the hindrance of the adoption of suicide prevention strategies, such as installing safety barriers at the Golden Gate Bridge, however technological developments offer new opportunities in suicide prevention, and the potential to reduce the number of deaths by suicide. We present an overview of current technological developments which are facilitating research in the field of suicide prevention, including multiple modes of screening such as network analysis of mobile-phone collected connectivity data, automatic detection of suicidality from social media content, and crisis detection from acoustic variability in speech patterns. The current field of mhealth apps for suicide prevention is assessed, and an innovative app for an Indigenous population is presented. From this overview, future challenges - technical and ethical - are discussed.

Commercialisation of CMOS Integrated Circuit Technology in Multi-Electrode Arrays for Neuroscience and Cell-Based Biosensors

PubMed Central

Graham, Anthony H. D.; Robbins, Jon; Bowen, Chris R.; Taylor, John

2011-01-01

The adaptation of standard integrated circuit (IC) technology as a transducer in cell-based biosensors in drug discovery pharmacology, neural interface systems and electrophysiology requires electrodes that are electrochemically stable, biocompatible and affordable. Unfortunately, the ubiquitous Complementary Metal Oxide Semiconductor (CMOS) IC technology does not meet the first of these requirements. For devices intended only for research, modification of CMOS by post-processing using cleanroom facilities has been achieved. However, to enable adoption of CMOS as a basis for commercial biosensors, the economies of scale of CMOS fabrication must be maintained by using only low-cost post-processing techniques. This review highlights the methodologies employed in cell-based biosensor design where CMOS-based integrated circuits (ICs) form an integral part of the transducer system. Particular emphasis will be placed on the application of multi-electrode arrays for in vitro neuroscience applications. Identifying suitable IC packaging methods presents further significant challenges when considering specific applications. The various challenges and difficulties are reviewed and some potential solutions are presented. PMID:22163884

Cost-Effective Additive Manufacturing in Space: HELIOS Technology Challenge Guide

NASA Technical Reports Server (NTRS)

DeVieneni, Alayna; Velez, Carlos Andres; Benjamin, David; Hollenbeck, Jay

2012-01-01

Welcome to the HELIOS Technology Challenge Guide. This document is intended to serve as a general road map for participants of the HELIOS Technology Challenge [HTC] Program and the associated inaugural challenge: HTC-01: Cost-Effective Additive Manufacturing in Space. Please note that this guide is not a rule book and is not meant to hinder the development of innovative ideas. Its primary goal is to highlight the objectives of the HTC-01 Challenge and to describe possible solution routes and pitfalls that such technology may encounter in space. Please also note that participants wishing to demonstrate any hardware developed under this program during any future HELIOS Technology Challenge showcase event(s) may be subject to event regulations to be published separately at a later date.

Using Digital Technologies in Clinical HIV Research: Real-World Applications and Considerations for Future Work

PubMed Central

Bull, Sheana; Dietrich, Janan; Haberer, Jessica E; Van Der Pol, Barbara; Voronin, Yegor; Wall, Kristin M; Whalen, Christopher; Priddy, Frances

2017-01-01

Background Digital technologies, especially if used in novel ways, provide a number of potential advantages to clinical research in trials related to human immunodeficiency virus (HIV) and acquired immune deficiency syndrome (AIDS) and may greatly facilitate operations as well as data collection and analysis. These technologies may even allow answering questions that are not answerable with older technologies. However, they come with a variety of potential concerns for both the participants and the trial sponsors. The exact challenges and means for alleviation depend on the technology and on the population in which it is deployed, and the rapidly changing landscape of digital technologies presents a challenge for creating future-proof guidelines for technology application. Objective The aim of this study was to identify and summarize some common themes that are frequently encountered by researchers in this context and highlight those that should be carefully considered before making a decision to include these technologies in their research. Methods In April 2016, the Global HIV Vaccine Enterprise surveyed the field for research groups with recent experience in novel applications of digital technologies in HIV clinical research and convened these groups for a 1-day meeting. Real-world uses of various technologies were presented and discussed by 46 attendees, most of whom were researchers involved in the design and conduct of clinical trials of biomedical HIV prevention and treatment approaches. After the meeting, a small group of organizers reviewed the presentations and feedback obtained during the meeting and categorized various lessons-learned to identify common themes. A group of 9 experts developed a draft summary of the findings that was circulated via email to all 46 attendees for review. Taking into account the feedback received, the group finalized the considerations that are presented here. Results Meeting presenters and attendees discussed the many successful applications of digital technologies to improve research outcomes, such as those for recruitment and enrollment, participant identification, informed consent, data collection, data quality, and protocol or treatment adherence. These discussions also revealed unintended consequence of technology usage, including risks to study participants and risks to study integrity. Conclusions Key lessons learned from these discussions included the need to thoroughly evaluate systems to be used, the idea that early success may not be sustained throughout the study, that some failures will occur, and considerations for study-provided devices. Additionally, taking these key lessons into account, the group generated recommendations on how to move forward with the use of technology in HIV vaccine and biomedical prevention trials. PMID:28760729

Optimizing Burn Treatment in Developing Low-and Middle-Income Countries with Limited Health Care Resources (Part 3)

PubMed Central

Atiyeh, B.; Masellis, A.; Conte, F.

2010-01-01

Summary The present review of the literature aims at analysing the challenges facing burn management in low- and middleincome countries and exploring probable modalities to optimize burn management in these countries. In Part I, epidemiology of burns injuries and the formidable challenges for proper management due to limited resources and inaccessibility to sophisticated skills and technologies in low- and middle income countries (LMICs) were presented. Part II discussed the actual state of burn injuries management in LMICs. In Part III of this review strategies for proper prevention and burn care in LMICs will be presented. PMID:21991190

NASA GSFC Strategic Nanotechnology Interests: Symposium on High-Rate Nanoscale Printing for Devices and Structures

NASA Technical Reports Server (NTRS)

Ericsson, Aprille J.

2014-01-01

The seminars invitees include representatives from industry, nonprofit research facility and universities. The presentation provides an overview of the NASAGSFC locations, technical capabilities and applied nanotechnology interests. Initially presented are advances by the broader technological communities on current miniaturized multiscale advanced manufacturing and 3D printing products on the micro and macro scale. Briefly assessed is the potential of moving toward the nanoscale for possible space flight applications and challenges. Lastly, highlighted are GSFCs current successes in nano-technology developments and targeted future applications.

Evaluation of Warm and Cold Shaft Designs for Large Multi-megawatt Direct Drive Offshore Superconducting Wind Generators

NASA Astrophysics Data System (ADS)

Kulkarni, Devdatta; Chen, Edward; Ho, Mantak; Karmaker, Haran

For offshore large multi-megawatt direct drive wind generators, because of its ability to generate high flux fields, superconducting (SC) technology can offer significant size and mass reduction over traditional technologies. However, cryogenic cooling design remains as one of the major obstacles to overcome. Different cryogenic cooling designs, such as warm shaft and cold shaft rotor design, present different advantages and challenges technically and commercially. This paper presents the investigations on both designs for large SC generators from manufacturability and service perspectives.

Impact of Scaled Technology on Radiation Testing and Hardening

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Cohn, Lewis M.

2005-01-01

This presentation gives a brief overview of some of the radiation challenges facing emerging scaled digital technologies with implications on using consumer grade electronics and next generation hardening schemes. Commercial semiconductor manufacturers are recognizing some of these issues as issues for terrestrial performance. Looking at means of dealing with soft errors. The thinned oxide has indicated improved TID tolerance of commercial products hardened by "serendipity" which does not guarantee hardness or say if the trend will continue. This presentation also focuses one reliability implications of thinned oxides.

No Mickey Mouse Operation: Despite Cutting-Edge Technology, Free Book Delivery, and Bilingual Programming, Luring Users Is the Orange County Library's Greatest Challenge

ERIC Educational Resources Information Center

Rogers, Michael

2004-01-01

Living in the vast shadow cast by the spires of the Magic Kingdom presents special challenges for Orlando's Orange County Library System (OCLS), the most formidable of which is increasing its relatively small user base. The library additionally faces tension between the administration and staff, political strife on the board, and looming contract…

"It's Funny that We Don't See the Similarities when that's What We're Aiming for"--Visualizing and Challenging Teachers' Stereotypes of Gender and Science

ERIC Educational Resources Information Center

Andersson, Kristina

2012-01-01

This study illuminates teachers' conceptions of gender and science and possibilities to challenge these conceptions. Since 2005, a group of teachers (K-6) in Sweden have met approximately once a month in two-hour seminars to discuss and develop their instruction in science and technology based on a gender perspective. The present data consist…

Sea Surface Salinity: The Next Remote Sensing Challenge

NASA Technical Reports Server (NTRS)

Lagerloef, Gary S. E.; Swift, Calvin T.; LeVine, David M.

1995-01-01

A brief history of salinity remote sensing is presented. The role of sea surface salinity (SSS) in the far north Atlantic and the influence of salinity variations on upper ocean dynamics in the tropics are described. An assessment of the present state of the technology of the SSS satellite remote sensing is given.

Understanding Presence, Affordance and the Time/Space Dimensions for Language Learning in Virtual Worlds

ERIC Educational Resources Information Center

Nocchi, Susanna; Blin, Françoise

2013-01-01

Notwithstanding their potential for novel approaches to language teaching and learning, Virtual Worlds (VWs) present numerous technological and pedagogical challenges that require new paradigms if the language learning experience and outcomes are to be successful. In this presentation, we argue that the notions of presence and affordance, together…

The Sub-Culture of Music and ICT in the Classroom

ERIC Educational Resources Information Center

Gall, Marina; Breeze, Nick

2007-01-01

In this paper the authors utilise findings from the Economic and Social Research Council-funded InterActive Education project to present a characterisation of the sub-culture of school music with Information and Communications Technology (ICT) in England. They consider the opportunities and challenges ICT presents to the teaching of primary (ages…

Self-Presentation, Interpersonal Perception, and Partner Selection in Computer-Mediated Relationship Formation

ERIC Educational Resources Information Center

Fiore, Andrew Rocco Tresolini

2010-01-01

The use of social and technological intermediaries to seek intimate partners has a long history. Yet the affordances and limitations of modern computer-mediated communication (CMC) systems built for this purpose--specifically, online dating sites--present new challenges and opportunities for those who use them to initiate intimate relationships.…

Supersonics Project: Airport Noise Technical Challenge

NASA Technical Reports Server (NTRS)

Bridges, James E.

2008-01-01

This presentation gives an overview of the work being done under the Airport Noise Technical Challenge portion of the Supersonics Project in the Fundamental Aeronautics Program. The objective of the Challenge is to provide technology (e.g. low noise nozzle concepts) and engineering tools required for a viable supersonic aircraft. To accomplish this we have activities divided into Prediction, Diagnostics, and Engineering elements. Each of the tasks reviewed here have potential applications to work being done at other flight regimes and other aircraft and are of interest to the Acoustics Technical Working Group.

Policy Considerations for Commercializing Natural Gas and Biomass CCUS

NASA Astrophysics Data System (ADS)

Abrahams, L.; Clavin, C.

2017-12-01

Captured CO2 from power generation has been discussed as an opportunity to improve the environmental sustainability of fossil fuel-based electricity generation and likely necessary technological solution necessary for meeting long-term climate change mitigation goals. In our presentation, we review the findings of a study of natural gas CCUS technology research and development and discuss their applications to biomass CCUS technology potential. Based on interviews conducted with key stakeholders in CCUS technology development and operations, this presentation will discuss these technical and economic challenges and potential policy opportunities to support commercial scale CCUS deployment. In current domestic and electricity and oil markets, CCUS faces economic challenges for commercial deployment. In particular, the economic viability of CCUS has been impacted by the sustained low oil prices that have limited the potential for enhanced oil recovery (EOR) to serve as a near-term utilization opportunity for the captured CO2. In addition, large scale commercial adoption of CCUS is constrained by regulatory inconsistencies and uncertainties across the United States, high initial capital costs, achieving familiarity with new technology applications to existing markets, developing a successful performance track record to acquire financing agreements, and competing against well-established incumbent technologies. CCUS also has additional technical hurdles for measurement, verification, and reporting within states that have existing policy and regulatory frameworks for climate change mitigation. In addition to fossil-fuel based CCUS, we will discuss emerging opportunities to utilize CCUS fueled by gasified biomass resulting in carbon negative power generation with expanded economic opportunities associated with the enhanced carbon sequestration. Successful technology development of CCUS technology requires a portfolio of research leading to technical advances, advances in financial instruments to leverage the benefits of multiple commodity markets (e.g. natural gas, oil, biomass), and policy instruments that address regulatory hurdles posed CCUS technology deployment.

Evaluation of target efficiencies for solid-liquid separation steps in biofuels production.

PubMed

Kochergin, Vadim; Miller, Keith

2011-01-01

Development of liquid biofuels has entered a new phase of large scale pilot demonstration. A number of plants that are in operation or under construction face the task of addressing the engineering challenges of creating a viable plant design, scaling up and optimizing various unit operations. It is well-known that separation technologies account for 50-70% of both capital and operating cost. Additionally, reduction of environmental impact creates technological challenges that increase project cost without adding to the bottom line. Different technologies vary in terms of selection of unit operations; however, solid-liquid separations are likely to be a major contributor to the overall project cost. Despite the differences in pretreatment approaches, similar challenges arise for solid-liquid separation unit operations. A typical process for ethanol production from biomass includes several solid-liquid separation steps, depending on which particular stream is targeted for downstream processing. The nature of biomass-derived materials makes it either difficult or uneconomical to accomplish complete separation in a single step. Therefore, setting realistic efficiency targets for solid-liquid separations is an important task that influences overall process recovery and economics. Experimental data will be presented showing typical characteristics for pretreated cane bagasse at various stages of processing into cellulosic ethanol. Results of generic material balance calculations will be presented to illustrate the influence of separation target efficiencies on overall process recoveries and characteristics of waste streams.

ARPA-E: Inspiring Energy Innovators

ScienceCinema

Babinec, Sue; Wessells, Colin; Zakhor, Avideh

2018-06-22

ARPA-E is supporting some of the best and brightest scientific minds across the country to turn aspirational ideas into tangible technology options. By presenting an ambitious energy challenge to the U.S. research and development community, ARPA-E attracts ideas from a diverse group of innovators, representing traditional and non-traditional energy backgrounds, who look to address energy challenges in new and exciting ways. Founder and CEO of Alveo Energy Dr. Colin Wessels and Co-Founder and CEO of Indoor Reality Dr. Avideh Zakhor are two ARPA-E project investigators that have made great progress, with support from the ARPA-E Tech-to-Market team, in advancing their technologies out of the lab and into the marketplace.

Using Technology to Improve Treatment Outcomes for Children and Adolescents with Eating Disorders.

PubMed

Darcy, Alison M; Lock, James

2017-01-01

Dissemination and implementation of evidence-based treatments are among the biggest challenges facing clinical psychiatry. Developing scalable evidence-based treatments is a major priority and fraught with challenges. This article describes the development of 3 technology-based innovations. It discusses the use of massive open online courses (MOOCs) and mobile applications. Three projects are presented: (1) the modification of a MOOC methodology for psychotherapy training clinicians in manualized family-based therapy (FBT) for adolescents with anorexia nervosa; (2) a modified MOOC platform for the delivery of FBT; and (3) the development of mobile applications for treatment augmentation and delivery. Copyright © 2016 Elsevier Inc. All rights reserved.

Challenges of In Space Robotic Servicing

NASA Technical Reports Server (NTRS)

Roberts, Brian John

2015-01-01

As future space missions extend beyond the friendly confines of low earth orbit, robots are becoming an increasingly vital component on flight manifests. While the main focus to-date has been on satellite servicing due to its high commercial potential, robots are also being considered for orbital debris removal, space construction, and asteroid sample retrieval. The robotic technologies and automation required to carry out these missions represent a significant advancement beyond the manipulation technology used previously on the Space Shuttle, the International Space Station, and planetary rovers. While higher demands are being driven by the more ambitious nature of the tasks, the handling of uncooperative targets such as satellites and asteroids, present a greater challenge.

Challenges in Bio-fabrication of Organoid Cultures.

PubMed

Peng, Weijie; Datta, Pallab; Wu, Yang; Dey, Madhuri; Ayan, Bugra; Dababneh, Amer; Ozbolat, Ibrahim T

2018-06-01

Three-dimensional (3D) organoids have shown advantages in cell culture over traditional two-dimensional (2D) culture, and have great potential in various applications of tissue engineering. However, there are limitations in current organoid fabrication technologies, such as uncontrolled size, poor reproductively, and inadequate complexity of organoids. In this chapter, we present the existing techniques and discuss the major challenges for 3D organoid biofabrication. Future perspectives on organoid bioprinting are also discussed, where bioprinting technologies are expected to make a major contribution in organoid fabrication, such as realizing mass production and constructing complex heterotypic tissues, and thus further advance the translational application of organoids in tissue engineering and regenerative medicine as well drug testing and pharmaceutics.

The Application of Wearable Technology in Surgery: Ensuring the Positive Impact of the Wearable Revolution on Surgical Patients

PubMed Central

Slade Shantz, Jesse Alan; Veillette, Christian J. H.

2014-01-01

Wearable technology has become an important trend in consumer electronics in the past year. The miniaturization and mass production of myriad sensors have made possible the integration of sensors and output devices in wearable platforms. Despite the consumer focus of the wearable revolution some surgical applications are being developed. These fall into augmentative, assistive, and assessment functions and primarily layer onto current surgical workflows. Some challenges to the adoption of wearable technologies are discussed and a conceptual framework for understanding the potential of wearable technology to revolutionize surgical practice are presented. PMID:25593963

Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

NASA Technical Reports Server (NTRS)

Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

2015-01-01

This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

Technical challenges in designing post-marketing eCRFs to address clinical safety and pharmacovigilance needs.

PubMed

Lu, Zhengwu

2010-01-01

To identify key challenges and propose technical considerations in designing electronic case report form (eCRF) for post-marketing studies, the author undertakes a comprehensive literature review of peer reviewed and grey literature to assess the key aspects, processes, standards, recommendations, and best practices in designing eCRFs based on industry experience in designing and supporting electronic data capture (EDC) studies. Literature search using strings on MEDLINE and PUBMED returned few papers directly related to CRF design. Health informatics and general practice journals were searched and results reviewed. Many conference, government commission, health professional and special interests group websites provide relevant information from practical experience - summarization of this information is presented. Further, we presented a list of concrete technical considerations in dealing with EDC technology/system limitations based on literature assessment and industry implementation experience. It is recognized that cross-functional teams be involved in eCRF design process and decision making. To summarize the keys in designing eCRFs to address post-market study safety and pharmacovigilance needs, the first is to identify required data elements from the study protocol supporting data analyses and reporting requirements. Secondly, accepted best practices, CDASH & CDISC guidelines, and company internal or therapeutic unit standard should be considered and applied. Coding (MedDRA & WHODD) mapping should be managed and implemented as well when possible. Finally, we need to be on top of the EDC technologies, challenge the technologies, drive EDC improvement via working with vendors, and utilize the technologies to drive clinical effectiveness. Copyright (c) 2009 Elsevier Inc. All rights reserved.

Micro- and nanodevices integrated with biomolecular probes

PubMed Central

Alapan, Yunus; Icoz, Kutay; Gurkan, Umut A.

2016-01-01

Understanding how biomolecules, proteins and cells interact with their surroundings and other biological entities has become the fundamental design criterion for most biomedical micro- and nanodevices. Advances in biology, medicine, and nanofabrication technologies complement each other and allow us to engineer new tools based on biomolecules utilized as probes. Engineered micro/nanosystems and biomolecules in nature have remarkably robust compatibility in terms of function, size, and physical properties. This article presents the state of the art in micro- and nanoscale devices designed and fabricated with biomolecular probes as their vital constituents. General design and fabrication concepts are presented and three major platform technologies are highlighted: microcantilevers, micro/nanopillars, and microfluidics. Overview of each technology, typical fabrication details, and application areas are presented by emphasizing significant achievements, current challenges, and future opportunities. PMID:26363089

Big data processing in the cloud - Challenges and platforms

NASA Astrophysics Data System (ADS)

Zhelev, Svetoslav; Rozeva, Anna

2017-12-01

Choosing the appropriate architecture and technologies for a big data project is a difficult task, which requires extensive knowledge in both the problem domain and in the big data landscape. The paper analyzes the main big data architectures and the most widely implemented technologies used for processing and persisting big data. Clouds provide for dynamic resource scaling, which makes them a natural fit for big data applications. Basic cloud computing service models are presented. Two architectures for processing big data are discussed, Lambda and Kappa architectures. Technologies for big data persistence are presented and analyzed. Stream processing as the most important and difficult to manage is outlined. The paper highlights main advantages of cloud and potential problems.

A revolution in Distributed Virtual Globes creation with e-CORCE space program

NASA Astrophysics Data System (ADS)

Antikidis, Jean-Pierre

2010-05-01

Space applications are to-day participating to our everyday life on a continuous fashion and most of the time in an invisible way. Meteorology, telecom and more recently GPS driven applications are these days fully participating to our modern and comfortable way of life. Therefore a new revolution is underway by which Space Remote Sensing technology will bring the full of the Earth available in a digital form. Present requirements for digital Earth creation at high resolution requirement are pushing space technology to a new technological frontier that could be called the: 1 day to one week, 1 meter, 1 Earth, challenge.The e-CORCE vision (e-Constellation d'Observation Recurrente Cellulaire) relies on a complete new avenue to create a full virtual earth with the help of small satellite constellation and make them operated as sensors connected to a powerful internet based ground network. To handle this incredibly high quantity of information (10 000 Billions metric pixel ), maximum use of psycho-visual compression associated to over-simplified platforms considered as space IP nodes and a massive World-wide Grid-based system composed of more than 40 receiving and processing nodes is contemplated. The presentation will introduce the technological hurdles and the way modern upcoming cyber-infrastructure technologies called WAG (Wide Area Grid) may open a practical and economically sound solution to this never attempted challenge.

Managed access technology to combat contraband cell phones in prison: Findings from a process evaluation.

PubMed

Grommon, Eric

2018-02-01

Cell phones in correctional facilities have emerged as one of the most pervasive forms of modern contraband. This issue has been identified as a top priority for many correctional administrators in the United States. Managed access, a technology that utilizes cellular signals to capture transmissions from contraband phones, has received notable attention as a promising tool to combat this problem. However, this technology has received little evaluative attention. The present study offers a foundational process evaluation and draws upon output measures and stakeholder interviews to identify salient operational challenges and subsequent lessons learned about implementing and maintaining a managed access system. Findings suggest that while managed access captures large volumes of contraband cellular transmissions, the technology requires significant implementation planning, personnel support, and complex partnerships with commercial cellular carriers. Lessons learned provide guidance for practitioners to navigate these challenges and for scholars to improve future evaluations of managed access. Copyright © 2017 Elsevier Ltd. All rights reserved.

Fundamental Aeronautics Program: Overview of Project Work in Supersonic Cruise Efficiency

NASA Technical Reports Server (NTRS)

Castner, Raymond

2011-01-01

The Supersonics Project, part of NASA?s Fundamental Aeronautics Program, contains a number of technical challenge areas which include sonic boom community response, airport noise, high altitude emissions, cruise efficiency, light weight durable engines/airframes, and integrated multi-discipline system design. This presentation provides an overview of the current (2011) activities in the supersonic cruise efficiency technical challenge, and is focused specifically on propulsion technologies. The intent is to develop and validate high-performance supersonic inlet and nozzle technologies. Additional work is planned for design and analysis tools for highly-integrated low-noise, low-boom applications. If successful, the payoffs include improved technologies and tools for optimized propulsion systems, propulsion technologies for a minimized sonic boom signature, and a balanced approach to meeting efficiency and community noise goals. In this propulsion area, the work is divided into advanced supersonic inlet concepts, advanced supersonic nozzle concepts, low fidelity computational tool development, high fidelity computational tools, and improved sensors and measurement capability. The current work in each area is summarized.

Using technology to enhance the quality of home health care: three case studies of health information technology initiatives at the visiting nurse service of New York.

PubMed

Russell, David; Rosenfeld, Peri; Ames, Sylvia; Rosati, Robert J

2010-01-01

There is a growing recognition among health services researchers and policy makers that Health Information Technology (HIT) has the potential to address challenging issues that face patients and providers of healthcare. The Visiting Nurse Service of New York (VNSNY), a large not-for-profit home healthcare agency, has integrated technology applications into the service delivery model of several programs. Case studies, including the development and implementation, of three informatics initiatives at VNSNY are presented on: (1) Quality Scorecards that utilize process, outcomes, cost, and satisfaction measures to assess performance among clinical staff and programs; (2) a tool to identify patients at risk of being hospitalized, and (3) a predictive model that identifies patients who are eligible for physical rehabilitation services. Following a description of these initiatives, we discuss their impact on quality and process indicators, as well as the opportunities and challenges to implementation. © 2010 National Association for Healthcare Quality.

Fixed Wing Project: Technologies for Advanced Air Transports

NASA Technical Reports Server (NTRS)

Del Rosario, Ruben; Koudelka, John M.; Wahls, Richard A.; Madavan, Nateri

2014-01-01

The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The presentation will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

Next-generation sequencing in the clinic: promises and challenges.

PubMed

Xuan, Jiekun; Yu, Ying; Qing, Tao; Guo, Lei; Shi, Leming

2013-11-01

The advent of next generation sequencing (NGS) technologies has revolutionized the field of genomics, enabling fast and cost-effective generation of genome-scale sequence data with exquisite resolution and accuracy. Over the past years, rapid technological advances led by academic institutions and companies have continued to broaden NGS applications from research to the clinic. A recent crop of discoveries have highlighted the medical impact of NGS technologies on Mendelian and complex diseases, particularly cancer. However, the ever-increasing pace of NGS adoption presents enormous challenges in terms of data processing, storage, management and interpretation as well as sequencing quality control, which hinder the translation from sequence data into clinical practice. In this review, we first summarize the technical characteristics and performance of current NGS platforms. We further highlight advances in the applications of NGS technologies towards the development of clinical diagnostics and therapeutics. Common issues in NGS workflows are also discussed to guide the selection of NGS platforms and pipelines for specific research purposes. Published by Elsevier Ireland Ltd.

Controls and Health Management Technologies for Intelligent Aerospace Propulsion Systems

NASA Technical Reports Server (NTRS)

Garg, Sanjay

2004-01-01

With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Technology Branch at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC) in Cleveland, Ohio, is leading and participating in various projects in partnership with other organizations within GRC and across NASA, the U.S. aerospace industry, and academia to develop advanced controls and health management technologies that will help meet these challenges through the concept of an Intelligent Engine. The key enabling technologies for an Intelligent Engine are the increased efficiencies of components through active control, advanced diagnostics and prognostics integrated with intelligent engine control to enhance component life, and distributed control with smart sensors and actuators in an adaptive fault tolerant architecture. This paper describes the current activities of the Controls and Dynamics Technology Branch in the areas of active component control and propulsion system intelligent control, and presents some recent analytical and experimental results in these areas.

Using Technology to Meet the Challenges of Medical Education

PubMed Central

Guze, Phyllis A.

2015-01-01

Medical education is rapidly changing, influenced by many factors including the changing health care environment, the changing role of the physician, altered societal expectations, rapidly changing medical science, and the diversity of pedagogical techniques. Changes in societal expectations put patient safety in the forefront, and raises the ethical issues of learning interactions and procedures on live patients, with the long-standing teaching method of “see one, do one, teach one” no longer acceptable. The educational goals of using technology in medical education include facilitating basic knowledge acquisition, improving decision making, enhancement of perceptual variation, improving skill coordination, practicing for rare or critical events, learning team training, and improving psychomotor skills. Different technologies can address these goals. Technologies such as podcasts and videos with flipped classrooms, mobile devices with apps, video games, simulations (part-time trainers, integrated simulators, virtual reality), and wearable devices (google glass) are some of the techniques available to address the changing educational environment. This article presents how the use of technologies can provide the infrastructure and basis for addressing many of the challenges in providing medical education for the future. PMID:26330687

Using Technology to Meet the Challenges of Medical Education.

PubMed

Guze, Phyllis A

2015-01-01

Medical education is rapidly changing, influenced by many factors including the changing health care environment, the changing role of the physician, altered societal expectations, rapidly changing medical science, and the diversity of pedagogical techniques. Changes in societal expectations put patient safety in the forefront, and raises the ethical issues of learning interactions and procedures on live patients, with the long-standing teaching method of "see one, do one, teach one" no longer acceptable. The educational goals of using technology in medical education include facilitating basic knowledge acquisition, improving decision making, enhancement of perceptual variation, improving skill coordination, practicing for rare or critical events, learning team training, and improving psychomotor skills. Different technologies can address these goals. Technologies such as podcasts and videos with flipped classrooms, mobile devices with apps, video games, simulations (part-time trainers, integrated simulators, virtual reality), and wearable devices (google glass) are some of the techniques available to address the changing educational environment. This article presents how the use of technologies can provide the infrastructure and basis for addressing many of the challenges in providing medical education for the future.

Structural technology challenges for evolutionary growth of Space Station Freedom

NASA Technical Reports Server (NTRS)

Doiron, Harold H.

1990-01-01

A proposed evolutionary growth scenario for Space Station Freedom was defined recently by a NASA task force created to study requirements for a Human Exploration Initiative. The study was an initial response to President Bush's July 20, 1989 proposal to begin a long range program of human exploration of space including a permanently manned lunar base and a manned mission to Mars. This growth scenario evolves Freedom into a critical transportation node to support lunar and Mars missions. The growth scenario begins with the Assembly Complete configuration and adds structure, power, and facilities to support a Lunar Transfer Vehicle (LTV) verification flight. Evolutionary growth continues to support expendable, then reusable LTV operations, and finally, LTV and Mars Transfer Vehicle (MTV) operations. The significant structural growth and additional operations creating new loading conditions will present new technological and structural design challenges in addition to the considerable technology requirements of the baseline Space Station Freedom program. Several structural design and technology issues of the baseline program are reviewed and related technology development required by the growth scenario is identified.

Social Sciences and Space Exploration

NASA Technical Reports Server (NTRS)

1988-01-01

The relationship between technology and society is a subject of continuing interest, because technological change and its effects confront and challenge society. College students are especially interested in technological change, knowing that they must cope with the pervasive and escalating effect of wide-ranging technological change. The space shuttle represents a technological change. The book's role is to serve as a resource for college faculty and students who are or will be interested in the social science implications of space technology. The book is designed to provide introductory material on a variety of space social topics to help faculty and students pursue teaching, learning, and research. Space technologies, perspectives on individual disciplines (economics, history, international law, philosophy, political science, psychology, and sociology) and interdiscipline approaches are presented.

An impoverished machine: challenges to human learning and instructional technology.

PubMed

Taraban, Roman

2008-08-01

Many of the limitations to human learning and processing identified by cognitive psychologists over the last 50 years still hold true, including computational constraints, low learning rates, and unreliable processing. Instructional technology can be used in classrooms and in other learning contexts to address these limitations to learning. However, creating technological innovations is not enough. As part of psychological science, the development and assessment of instructional systems should be guided by theories and practices within the discipline. The technology we develop should become an object of research like other phenomena that are studied. In the present article, I present an informal account of my own work in assessing instructional technology for engineering thermodynamics to show not only the benefits, but also the limitations, in studying the technology we create. I conclude by considering several ways of advancing the development of instructional technology within the SCiP community, including interdisciplinary research and envisioning learning contexts that differ radically from traditional learning focused on lectures and testing.

Pipelining in a changing competitive environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, E.G.; Wishart, D.M.

1996-12-31

The changing competitive environment for the pipeline industry presents a broad spectrum of new challenges and opportunities: international cooperation; globalization of opportunities, organizations and competition; and integrated systems approach to system configuration, financing, contracting strategy, materials sourcing, and operations; cutting edge and emerging technologies; adherence to high standards of environmental protection; an emphasis on safety; innovative approaches to project financing; and advances in technology and programs to maintain the long term, cost effective integrity of operating pipeline systems. These challenges and opportunities are partially a result of the increasingly competitive nature of pipeline development and the public`s intolerance to incidentsmore » of pipeline failure. A creative systems approach to these challenges is often the key to the project moving ahead. This usually encompasses collaboration among users of the pipeline, pipeline owners and operators, international engineering and construction companies, equipment and materials suppliers, in-country engineers and constructors, international lending agencies and financial institutions.« less

Automotive applications of chromogenic materials

NASA Astrophysics Data System (ADS)

Lynam, Niall R.

1990-03-01

Automobiles present both opportunities and challenges for large-area chromogenics. Opportunities include optical and thermal control of vehicle glazing along with optical control of rearview mirrors and privacy glass. Challenges include cost-effectively meeting automotive safety, performance, and reliability standards. Worldwide automobile production' for 1987 is listed in Table 1. Of the roughly 33 million cars produced annually, approximately 8% are luxury models which are candidates for features such as auto- matically dimming rearview mirrors or variable opacity sunroofs. Thus copious commercial opportunities await whatever chromogenic technologies qualify for use in automobiles. This review will describe the performance, safety, and reliability/durability required for automotive use. Commercial opportunities and challenges will be discussed including cost factors and specifications. Chromogenic technologies such as electrochromism, liquid crystals and thermochromism will be reviewed in terms of how publicly announced technical developments match automotive needs and expectations. Construction and performance of ex- isting or imminent chromogenic devices will be described. Finally, how opportunities and challenges of the automotive environment translate to other applications for chromogenic materials such as architectural or information display devices will be discussed. The objective is to generally review the applications, the technologies appropriate to these applications, and the automotive chromogenic devices available at the time of writing to match these applications.

Summary of ECE presentations at EC-18

DOE PAGES

Taylor, G.

2015-03-12

There were nine ECE and one EBE presentation at EC-18. Four of the presentations were on various aspects of ECE on ITER. The ITER ECE diagnostic has entered an important detailed preliminary design phase and faces several design challenges in the next 2-3 years. Most of the other ECE presentations at the workshop were focused on applications of ECE diagnostics to plasma measurements, rather than improvements in technology, although it was apparent that heterodyne receiver technology continues to improve. CECE, ECE imaging and EBE imaging are increasingly providing valuable insights into plasma behavior that is important to understand if futuremore » burning plasma devices, such as ITER, FNSF and DEMO, are to be successful.« less

Lost in the Cloud - New Challenges for Teaching GIS

NASA Astrophysics Data System (ADS)

Bellman, C. J.; Pupedis, G.

2016-06-01

As cloud based services move towards becoming the dominant paradigm in many areas of information technology, GIS has also moved into `the Cloud', creating a new opportunities for professionals and students alike, while at the same time presenting a range of new challenges and opportunities for GIS educators. Learning for many students in the geospatial science disciplines has been based on desktop software for GIS, building their skills from basic data handling and manipulation to advanced spatial analysis and database storage. Cloud-based systems challenge this paradigm in many ways, with some of the skills being replaced by clever and capable software tools, while the ubiquitous nature of the computing environment offers access and processing from anywhere, on any device. This paper describes our experiences over the past two years in developing and delivering a new course incorporating cloud based technologies for GIS and illustrates the many benefits and pitfalls of a cloud based approach to teaching. Throughout the course, students were encouraged to provide regular feedback on the course through the use of online journals. This allowed students to critique the approach to teaching, the learning materials available and to describe their own level of comfort and engagement with the material in an honest and non-confrontational manner. Many of the students did not have a strong information technology background and the journals provided great insight into the views of the students and the challenges they faced in mastering this technology.

Additive manufacturing in production: challenges and opportunities

NASA Astrophysics Data System (ADS)

Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

2015-03-01

Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

Multi-Layer E-Textile Circuits

NASA Technical Reports Server (NTRS)

Dunne, Lucy E.; Bibeau, Kaila; Mulligan, Lucie; Frith, Ashton; Simon, Cory

2012-01-01

Stitched e-textile circuits facilitate wearable, flexible, comfortable wearable technology. However, while stitched methods of e-textile circuits are common, multi-layer circuit creation remains a challenge. Here, we present methods of stitched multi-layer circuit creation using accessible tools and techniques.

EVA Physiology, Systems and Performance [EPSP] Project

NASA Technical Reports Server (NTRS)

Gernhardt, Michael L.

2010-01-01

This viewgraph presentation gives a general overview of the biomedical and technological challenges of Extravehicular Activity (EVA). The topics covered include: 1) Prebreathe Protocols; 2) Lunar Suit Testing and Development; and 3) Lunar Electric Rover and Exploration Operations Concepts.

Technology Learning Activities: Columbus Sailed the Ocean Blue, the Cellular Connection, Emergency Shelter.

ERIC Educational Resources Information Center

Etchison, Cindy; Deal, Walter F., III

1992-01-01

Presents learning activities such as planning and building a sailboat, manufacturing cellular phone cases, and designing and building emergency shelters. Includes the context, the challenge, resources used, objectives, materials needed, and an evaluation. (JOW)

Real Time Quality Control Methods for Cued EMI Data Collection

DTIC Science & Technology

2016-01-12

of magnetic geology creating false source locations;  out of the remaining 78 recollects that were due to legitimate sources (i.e., a metal...White River Technologies January 2016 The magnetic geology at the site presented the most significant challenge to the technology and...object, magnetic geology , etc.); however, many of the reacquires due to common errors such as inaccurate target picking could be replaced by in-field

Robotic liver surgery

PubMed Central

Leung, Universe

2014-01-01

Robotic surgery is an evolving technology that has been successfully applied to a number of surgical specialties, but its use in liver surgery has so far been limited. In this review article we discuss the challenges of minimally invasive liver surgery, the pros and cons of robotics, the evolution of medical robots, and the potentials in applying this technology to liver surgery. The current data in the literature are also presented. PMID:25392840

Porous silicon for drug delivery applications and theranostics: recent advances, critical review and perspectives.

PubMed

Kumeria, Tushar; McInnes, Steven J P; Maher, Shaheer; Santos, Abel

2017-12-01

Porous silicon (pSi) engineered by electrochemical etching has been used as a drug delivery vehicle to address the intrinsic limitations of traditional therapeutics. Biodegradability, biocompatibility, and optoelectronic properties make pSi a unique candidate for developing biomaterials for theranostics and photodynamic therapies. This review presents an updated overview about the recent therapeutic systems based on pSi, with a critical analysis on the problems and opportunities that this technology faces as well as highlighting pSi's growing potential. Areas covered: Recent progress in pSi-based research includes drug delivery systems, including biocompatibility studies, drug delivery, theranostics, and clinical trials with the most relevant examples of pSi-based systems presented here. A critical analysis about the technical advantages and disadvantages of these systems is provided along with an assessment on the challenges that this technology faces, including clinical trials and investors' support. Expert opinion: pSi is an outstanding material that could improve existing drug delivery and photodynamic therapies in different areas, paving the way for developing advanced theranostic nanomedicines and incorporating payloads of therapeutics with imaging capabilities. However, more extensive in-vivo studies are needed to assess the feasibility and reliability of this technology for clinical practice. The technical and commercial challenges that this technology face are still uncertain.

Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems: Key Findings from a Roadmapping Workshop

PubMed Central

Weiss, Brian A.; Vogl, Gregory; Helu, Moneer; Qiao, Guixiu; Pellegrino, Joan; Justiniano, Mauricio; Raghunathan, Anand

2017-01-01

The National Institute of Standards and Technology (NIST) hosted the Roadmapping Workshop – Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) in Fall 2014 to discuss the needs and priorities of stakeholders in the PHM4SMS technology area. The workshop brought together over 70 members of the PHM community. The attendees included representatives from small, medium, and large manufacturers; technology developers and integrators; academic researchers; government organizations; trade associations; and standards bodies. The attendees discussed the current and anticipated measurement science challenges to advance PHM methods and techniques for smart manufacturing systems; the associated research and development needed to implement condition monitoring, diagnostic, and prognostic technologies within manufacturing environments; and the priorities to meet the needs of PHM in manufacturing. This paper will summarize the key findings of this workshop, and present some of the critical measurement science challenges and corresponding roadmaps, i.e., suggested courses of action, to advance PHM for manufacturing. Milestones and targeted capabilities will be presented for each roadmap across three areas: PHM Manufacturing Process Techniques; PHM Performance Assessment; and PHM Infrastructure – Hardware, Software, and Integration. An analysis of these roadmaps and crosscutting themes seen across the breakout sessions is also discussed. PMID:28664163

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Use of commercial-off-the-shelf (COTS) components and emerging technologies often require space flight missions to accept elevated risk. The Radiation Hardness Assurance (RHA) flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate and mitigate the risk a project or program takes. Depending on the mission profile and environment, different missions may not necessarily benefit from the same risk reduction efforts or cost reduction attempts. While this poses challenges for the radiation engineer, it also presents opportunities to tailor the RHA flow to minimize risk based on the environment or design criticality while remaining within budget. This presentation will focus on an approach to RHA amidst the present challenges, using the same RHA flow as in the past, with examples from recent radiation test results. The current challenges and the types of risk will be identified. How these risks drive requirements development and realization will be explained with examples of device results and data for single event effects (SEE) and in one case total ionizing dose (TID).

VAST Challenge 2014: The Kronos Incident

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whiting, Mark A.; Cook, Kristin A.; Grinstein, Georges

2014-10-31

The 2014 IEEE Visual Analytics Science and Technology (VAST) Challenge presented researchers with a single fictitious scenario: the disappearance of staff members of the GASTech oil and gas company on location on the island of Kronos. A group named the Protectors of Kronos (POK) was the prime suspect in the disappearance. Three mini-challenges and a grand challenge were offered. Mini-challenge 1 included multiple types of text data for participants to provide a timeline of key events and characterize the POK, mini-challenge 2 focused on individuals’ movement and financial data for participants to provide patterns of daily life, and mini-challenge 3more » featured real-time streaming social media and emergency service data for participants to provide hostage and kidnapper information. The grand challenge asked the participants to integrate results and generate a synopsis of events. The VAST Challenge received 73 submissions from 13 countries« less

Titanium Aluminide Casting Technology Development

NASA Astrophysics Data System (ADS)

Bünck, Matthias; Stoyanov, Todor; Schievenbusch, Jan; Michels, Heiner; Gußfeld, Alexander

2017-12-01

Titanium aluminide alloys have been successfully introduced into civil aircraft engine technology in recent years, and a significant order volume increase is expected in the near future. Due to its beneficial buy-to-fly ratio, investment casting bears the highest potential for cost reduction of all competing production technologies for TiAl-LPTB. However, highest mechanical properties can be achieved by TiAl forging. In view of this, Access e.V. has developed technologies for the production of TiAl investment cast parts and TiAl die cast billets for forging purposes. While these parts meet the highest requirements, establishing series production and further optimizing resource and economic efficiency are present challenges. In order to meet these goals, Access has recently been certified according to aircraft standards, aiming at qualifying parts for production on technology readiness level 6. The present work gives an overview of the phases of development and certification.

Autonomous RPOD Technology Challenges for the Coming Decade

NASA Technical Reports Server (NTRS)

Naasz, Bo J.; Moreau, Michael C.

2012-01-01

Rendezvous Proximity Operations and Docking (RPOD) technologies are important to a wide range of future space endeavors. This paper will review some of the recent and ongoing activities related to autonomous RPOD capabilities and summarize the current state of the art. Gaps are identified where future investments are necessary to successfully execute some of the missions likely to be conducted within the next ten years. A proposed RPOD technology roadmap that meets the broad needs of NASA's future missions will be outlined, and ongoing activities at OSFC in support of a future satellite servicing mission are presented. The case presented shows that an evolutionary, stair-step technology development program. including a robust campaign of coordinated ground tests and space-based system-level technology demonstration missions, will ultimately yield a multi-use main-stream autonomous RPOD capability suite with cross-cutting benefits across a wide range of future applications.

A reflective teaching challenge to motivate educational innovation.

PubMed

Edwards, Roger A; Kirwin, Jennifer; Gonyeau, Michael; Matthews, S James; Lancaster, Jason; DiVall, Margarita

2014-06-17

To describe a teaching challenge intended to increase faculty use of evidence-based and student-centered instructional strategies in the demanding school of pharmacy context with technology-savvy students. A teaching challenge was created that required faculty members to incorporate a "new-to-you" innovative teaching method in a class, course, or experiential activity. The method was linked to at least 1 of 7 evidence-based principles for effective teaching. Faculty members were exposed to colleagues' teaching strategies via brief voluntary presentations at department meetings. A post-challenge survey provided assessment data about the challenge. Responses to a baseline survey provided additional information about what faculty members were already doing (52% response rate). Eighty-one percent of faculty respondents completed the challenge. A wide array of new strategies (13 categories such as flipped classrooms and social media) was implemented and 75% included the use of technology. Nearly all respondents (96%) thought that participation in the challenge was worth the effort and planned to participate again the following year. All faculty members intended to continue using their new strategy and 56% planned additional modifications with future implementations. The challenge demonstrated how multiple goals of curricular improvement, faculty development, and student-centered instruction could be achieved together. The teaching challenge motivated most of the faculty members to try something new to them. Links between evidence-based principles and day-to-day activities were strengthened. The new-to-you design placed the challenge within reach of faculty members regardless of their background, subject, or experience.

Integrated, Multidisciplinary and Technology-Enhanced Science Education: The Next Frontier

PubMed Central

Dinov, Ivo D.

2011-01-01

Contemporary science education at all levels presents several critical pedagogical and social challenges to educators and learners alike. Among these challenges are the widening Intergenerational Information Technology (IIT) divide and the need for a comprehensive and balanced multidisciplinary training. In the past few years, it has become clear that one significant hurdle impedes the efforts to integrate information technology in the classroom – the Intergenerational IT divide. The IIT gap reflects a different growing misalignment between providers and recipients of the science and technology educational content in terms of the expected vs. supplied, needed vs. perceived and contextual vs. abstract specialized learning. The common K-12 teacher or college instructor is much less familiar with, and slower to adapt to, the new ether of communication and novel IT resources. The transfer and blending of data, research challenges and methodologies between diverse areas of science is also critical in motivating wider spectra of students, demonstrating cross-disciplinary methodological concepts and synergies, as well as for engaging students in research projects. This article discusses the problems faced by modern science educators and suggests some methods and vision for coping with the increasing IIT divide and the social need to train “complete” and broadly educated citizens. PMID:21552453

Dive Europa: a search-for-life initiative.

PubMed

Naganuma, T; Uematsu, H

1998-06-01

Liquid water, underwater volcanoes and possibly life forms have been suggested to be present beneath the estimated 10 km-thick ice shell of Europa the Jovian satellite J2. Europa's possible ocean is estimated to be 100-200km deep. Despite the great depth of the Europa's ocean, hydrostatic pressure at the seafloor would be 130-260 MPa, corresponding to 13-26 km depth of a theoretical Earth's ocean. The hydrostatic pressure is not beyond the edge of existing deep-sea technology. Here we propose exploration of Europa's deep-sea by the use of current technologies, taking a symbolic example of a deep submergence vehicle Shinkai 6500 which dives to a depth of 6.5 km deep (50 km depth of Europa's ocean). Shinkai 6500 is embarkable in the payload bay of the Space Shuttles in terms of size and weight for the transportation to a Low Earth Orbit (LEO). Secondary boost is needed for interplanetary flight from the LEO. On-orbit assembly of the secondary booster is a technological challenge. The International Space Station (ISS) and ISS-related technologies will facilitate the secondary boost. Also, ice shell drilling is a challenge and is needed before the dive into Europa's ocean. These challenges should be overcome during a certain leading time for matured experience in the ISS operation.

Converging blockchain and next-generation artificial intelligence technologies to decentralize and accelerate biomedical research and healthcare

PubMed Central

Mamoshina, Polina; Ojomoko, Lucy; Yanovich, Yury; Ostrovski, Alex; Botezatu, Alex; Prikhodko, Pavel; Izumchenko, Eugene; Aliper, Alexander; Romantsov, Konstantin; Zhebrak, Alexander; Ogu, Iraneus Obioma; Zhavoronkov, Alex

2018-01-01

The increased availability of data and recent advancements in artificial intelligence present the unprecedented opportunities in healthcare and major challenges for the patients, developers, providers and regulators. The novel deep learning and transfer learning techniques are turning any data about the person into medical data transforming simple facial pictures and videos into powerful sources of data for predictive analytics. Presently, the patients do not have control over the access privileges to their medical records and remain unaware of the true value of the data they have. In this paper, we provide an overview of the next-generation artificial intelligence and blockchain technologies and present innovative solutions that may be used to accelerate the biomedical research and enable patients with new tools to control and profit from their personal data as well with the incentives to undergo constant health monitoring. We introduce new concepts to appraise and evaluate personal records, including the combination-, time- and relationship-value of the data. We also present a roadmap for a blockchain-enabled decentralized personal health data ecosystem to enable novel approaches for drug discovery, biomarker development, and preventative healthcare. A secure and transparent distributed personal data marketplace utilizing blockchain and deep learning technologies may be able to resolve the challenges faced by the regulators and return the control over personal data including medical records back to the individuals. PMID:29464026

Converging blockchain and next-generation artificial intelligence technologies to decentralize and accelerate biomedical research and healthcare.

PubMed

Mamoshina, Polina; Ojomoko, Lucy; Yanovich, Yury; Ostrovski, Alex; Botezatu, Alex; Prikhodko, Pavel; Izumchenko, Eugene; Aliper, Alexander; Romantsov, Konstantin; Zhebrak, Alexander; Ogu, Iraneus Obioma; Zhavoronkov, Alex

2018-01-19

The increased availability of data and recent advancements in artificial intelligence present the unprecedented opportunities in healthcare and major challenges for the patients, developers, providers and regulators. The novel deep learning and transfer learning techniques are turning any data about the person into medical data transforming simple facial pictures and videos into powerful sources of data for predictive analytics. Presently, the patients do not have control over the access privileges to their medical records and remain unaware of the true value of the data they have. In this paper, we provide an overview of the next-generation artificial intelligence and blockchain technologies and present innovative solutions that may be used to accelerate the biomedical research and enable patients with new tools to control and profit from their personal data as well with the incentives to undergo constant health monitoring. We introduce new concepts to appraise and evaluate personal records, including the combination-, time- and relationship-value of the data. We also present a roadmap for a blockchain-enabled decentralized personal health data ecosystem to enable novel approaches for drug discovery, biomarker development, and preventative healthcare. A secure and transparent distributed personal data marketplace utilizing blockchain and deep learning technologies may be able to resolve the challenges faced by the regulators and return the control over personal data including medical records back to the individuals.

Lunar Dust Mitigation Technology Development

NASA Technical Reports Server (NTRS)

Hyatt, Mark J.; Deluane, Paul B.

2008-01-01

NASA s plans for implementing the Vision for Space Exploration include returning to the moon as a stepping stone for further exploration of Mars, and beyond. Dust on the lunar surface has a ubiquitous presence which must be explicitly addressed during upcoming human lunar exploration missions. While the operational challenges attributable to dust during the Apollo missions did not prove critical, the comparatively long duration of impending missions presents a different challenge. Near term plans to revisit the moon places a primary emphasis on characterization and mitigation of lunar dust. Comprised of regolith particles ranging in size from tens of nanometers to microns, lunar dust is a manifestation of the complex interaction of the lunar soil with multiple mechanical, electrical, and gravitational effects. The environmental and anthropogenic factors effecting the perturbation, transport, and deposition of lunar dust must be studied in order to mitigate it s potentially harmful effects on exploration systems. This paper presents the current perspective and implementation of dust knowledge management and integration, and mitigation technology development activities within NASA s Exploration Technology Development Program. This work is presented within the context of the Constellation Program s Integrated Lunar Dust Management Strategy. The Lunar Dust Mitigation Technology Development project has been implemented within the ETDP. Project scope and plans will be presented, along with a a perspective on lessons learned from Apollo and forensics engineering studies of Apollo hardware. This paper further outlines the scientific basis for lunar dust behavior, it s characteristics and potential effects, and surveys several potential strategies for its control and mitigation both for lunar surface operations and within the working volumes of a lunar outpost.

Liquid biopsy on chip: a paradigm shift towards the understanding of cancer metastasis.

PubMed

Tadimety, Amogha; Syed, Abeer; Nie, Yuan; Long, Christina R; Kready, Kasia M; Zhang, John X J

2017-01-23

This comprehensive review serves as a guide for developing scalable and robust liquid biopsies on chip for capture, detection, and analysis of circulating tumor cells (CTCs). Liquid biopsy, the detection of biomarkers from body fluids, has proven challenging because of CTC rarity and the heterogeneity of CTCs shed from tumors. The review starts with the underlying biological mechanisms that make liquid biopsy a challenge before moving into an evaluation of current technological progress. Then, a framework for evaluation of the technologies is presented with special attention to throughput, capture rate, and cell viability for analysis. Technologies for CTC capture, detection, and analysis will be evaluated based on these criteria, with a focus on current approaches, limitations and future directions. The paper provides a critical review for microchip developers as well as clinical investigators to build upon the existing progress towards the goal of designing CTC capture, detection, and analysis platforms.

Cell-based therapy technology classifications and translational challenges

PubMed Central

Mount, Natalie M.; Ward, Stephen J.; Kefalas, Panos; Hyllner, Johan

2015-01-01

Cell therapies offer the promise of treating and altering the course of diseases which cannot be addressed adequately by existing pharmaceuticals. Cell therapies are a diverse group across cell types and therapeutic indications and have been an active area of research for many years but are now strongly emerging through translation and towards successful commercial development and patient access. In this article, we present a description of a classification of cell therapies on the basis of their underlying technologies rather than the more commonly used classification by cell type because the regulatory path and manufacturing solutions are often similar within a technology area due to the nature of the methods used. We analyse the progress of new cell therapies towards clinical translation, examine how they are addressing the clinical, regulatory, manufacturing and reimbursement requirements, describe some of the remaining challenges and provide perspectives on how the field may progress for the future. PMID:26416686

Innovating With Rehabilitation Technology in the Real World: Promises, Potentials, and Perspectives.

PubMed

Chua, Karen Sui Geok; Kuah, Christopher Wee Keong

2017-10-01

In this article, we discuss robotic-assisted therapy as an emerging and significant field of clinical rehabilitation and its value proposition for innovating rehabilitation clinical practice. Attempts to achieve integration among clinicians' practices and bioengineers' machines often generate new challenges and controversies. To date, the literature is indicative of a sizeable number and variety of robotic devices in the field of clinical rehabilitation, some are commercially available; however, large-scale clinical outcomes are less positive than expected. The following main themes related to integrating rehabilitation technology in real-world clinical practice will be discussed: the application of current evidence-based practice and knowledge in relation to treatment in the rehabilitation clinic, perspectives from rehabilitation professionals using robotic-aided therapy with regard to challenges, and strategies for problem solving. Lastly, we present innovation philosophies with regard to sustainability of clinical rehabilitation technologies.

Facing technological challenges of Solar Updraft Power Plants

NASA Astrophysics Data System (ADS)

Lupi, F.; Borri, C.; Harte, R.; Krätzig, W. B.; Niemann, H.-J.

2015-01-01

The Solar Updraft Power Plant technology addresses a very challenging idea of combining two kinds of renewable energy: wind and solar. The working principle is simple: a Solar Updraft Power Plant (SUPP) consists of a collector area to heat the air due to the wide-banded ultra-violet solar radiation, the high-rise solar tower to updraft the heated air to the atmosphere, and in between the power conversion unit, where a system of coupled turbines and generators transforms the stream of heated air into electric power. A good efficiency of the power plant can only be reached with extra-large dimensions of the tower and/or the collector area. The paper presents an up-to-date review of the SUPP technology, focusing on the multi-physics modeling of the power plant, on the structural behavior of the tower and, last but not least, on the modeling of the stochastic wind loading process.

Innovating With Rehabilitation Technology in the Real World

PubMed Central

Chua, Karen Sui Geok; Kuah, Christopher Wee Keong

2017-01-01

Abstract In this article, we discuss robotic-assisted therapy as an emerging and significant field of clinical rehabilitation and its value proposition for innovating rehabilitation clinical practice. Attempts to achieve integration among clinicians' practices and bioengineers' machines often generate new challenges and controversies. To date, the literature is indicative of a sizeable number and variety of robotic devices in the field of clinical rehabilitation, some are commercially available; however, large-scale clinical outcomes are less positive than expected. The following main themes related to integrating rehabilitation technology in real-world clinical practice will be discussed: the application of current evidence-based practice and knowledge in relation to treatment in the rehabilitation clinic, perspectives from rehabilitation professionals using robotic-aided therapy with regard to challenges, and strategies for problem solving. Lastly, we present innovation philosophies with regard to sustainability of clinical rehabilitation technologies. PMID:28708632

Designing patient-centric applications for chronic disease management.

PubMed

Tsalatsanis, Athanasios; Gil-Herrera, Eleazar; Yalcin, Ali; Djulbegovic, Benjamin; Barnes, Laura

2011-01-01

Chronic diseases such as diabetes and heart disease are the leading causes of disability and death in the developed world. Technological interventions such as mobile applications have the ability to facilitate and motivate patients in chronic disease management, but these types of interventions present considerable design challenges. The primary objective of this paper is to present the challenges arising from the design and implementation of software applications aiming to assist patients in chronic disease management. We also outline preliminary results regarding a self-management application currently under development targeting young adults suffering from type 1 diabetes.

Therapeutic ultrasound - Exciting applications and future challenges

NASA Astrophysics Data System (ADS)

Saffari, Nader

2018-04-01

This paper presents an overview of the applications of ultrasound for the treatment of an ever-growing range of medical conditions. After presenting a brief history of the development of therapeutic ultrasound, the different mechanisms by which beneficial bio-effects are triggered will be discussed. This will be followed by a discussion of some of the more promising applications, some of which have already been licensed and introduced into the clinic. The case of liver tumour ablation will be discussed to demonstrate some of the engineering challenges that still need to be overcome before this technology finds wider uptake in the medical world.

Intelligent Computational Systems. Opening Remarks: CFD Application Process Workshop

NASA Technical Reports Server (NTRS)

VanDalsem, William R.

1994-01-01

This discussion will include a short review of the challenges that must be overcome if computational physics technology is to have a larger impact on the design cycles of U.S. aerospace companies. Some of the potential solutions to these challenges may come from the information sciences fields. A few examples of potential computational physics/information sciences synergy will be presented, as motivation and inspiration for the Improving The CFD Applications Process Workshop.

Engine technology challenges for a 21st Century High-Speed Civil Transport

NASA Technical Reports Server (NTRS)

Shaw, Robert J.; Gilkey, Samuel; Hines, Richard

1993-01-01

Ongoing NASA-funded studies by Boeing, McDonnell-Douglas, General Electric, and Pratt & Whitney indicate that an opportunity exists for a 21st Century High-Speed Civil Transport (HSCT) to become a major part of the international air transportation system. However, before industry will consider an HSCT product launch and an investment estimated to be over $15 billion for design and certification, major technology advances must be made. An overview of the propulsion-specific technology advances that must be in hand before an HSCT product launch could be considered is presented.

Nanotechnology and chip level systems for pressure driven liquid chromatography and emerging analytical separation techniques: a review.

PubMed

Lavrik, N V; Taylor, L T; Sepaniak, M J

2011-05-23

Pressure driven liquid chromatography (LC) is a powerful and versatile separation technique particularly suitable for differentiating species present in extremely small quantities. This paper briefly reviews main historical trends and focuses on more recently developed technological approaches in miniaturization and on-chip integration of LC columns. The review emphasizes enabling technologies as well as main technological challenges specific to pressure driven separations and highlights emerging concepts that could ultimately overcome fundamental limitations of conventional LC columns. Copyright © 2011 Elsevier B.V. All rights reserved.

Technology Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Barnhardt, Michael; Wright, Michael; Hughes, Monica

2017-01-01

The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

An overview of flywheel technology for space applications

NASA Astrophysics Data System (ADS)

Decker, D. Kent; Spector, Victor A.; Pieronek, Thomas J.

1997-01-01

Recent developments in advanced composite flywheels using magnetic bearings has produced specific energies greater than 30 Whr/lb. These specific energy levels provide an opportunity for significant spacecraft weight savings compared to using nickel-hydrogen battery technology. Additional weight savings are possible if the flywheels are also used for momentum control. This paper explores the new challenges presented by application of flywheel technology to space power and attitude control subsystems. Issues with respect to mission application, safety and containment, launch environment, and combined power and attitude control operation are discussed.

Advanced Methods for Incorporating Solar Energy Technologies into Electric Sector Capacity-Expansion Models: Literature Review and Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, P.; Eurek, K.; Margolis, R.

2014-07-01

Because solar power is a rapidly growing component of the electricity system, robust representations of solar technologies should be included in capacity-expansion models. This is a challenge because modeling the electricity system--and, in particular, modeling solar integration within that system--is a complex endeavor. This report highlights the major challenges of incorporating solar technologies into capacity-expansion models and shows examples of how specific models address those challenges. These challenges include modeling non-dispatchable technologies, determining which solar technologies to model, choosing a spatial resolution, incorporating a solar resource assessment, and accounting for solar generation variability and uncertainty.

Challenges in Research and Health Technology Assessment of Rare Disease Technologies: Report of the ISPOR Rare Disease Special Interest Group.

PubMed

Nestler-Parr, Sandra; Korchagina, Daria; Toumi, Mondher; Pashos, Chris L; Blanchette, Christopher; Molsen, Elizabeth; Morel, Thomas; Simoens, Steven; Kaló, Zoltán; Gatermann, Ruediger; Redekop, William

2018-05-01

Successful development of new treatments for rare diseases (RDs) and their sustainable patient access require overcoming a series of challenges related to research and health technology assessment (HTA). These impediments, which may be unique to RDs or also apply to common diseases but are particularly pertinent in RDs, are diverse and interrelated. To develop for the first time a catalog of primary impediments to RD research and HTA, and to describe the cause and effect of individual challenges. Challenges were identified by an international 22-person expert working group and qualitative outreach to colleagues with relevant expertise. A broad range of stakeholder perspectives is represented. Draft results were presented at annual European and North American International Society for Pharmacoeconomics and Outcomes Research (ISPOR) congresses, and written comments were received by the 385-strong ISPOR Rare Disease Review Group from two rounds of review. Findings were refined and confirmed via targeted literature search. Research-related challenges linked to the low prevalence of RDs were categorized into those pertaining to disease recognition and diagnosis, evaluation of treatment effect, and patient recruitment for clinical research. HTA-related challenges were classified into issues relating to the lack of a tailored HTA method for RD treatments and uncertainty for HTA agencies and health care payers. Identifying and highlighting diverse, but interrelated, key challenges in RD research and HTA is an essential first step toward developing implementable and sustainable solutions. A collaborative multistakeholder effort is required to enable faster and less costly development of safe, efficacious, and appropriate new RD therapies that offer value for money. Copyright © 2018 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

The Pacific Century. Opportunities and Challenges for Continuing Education, NUCEA Region VI Conference Proceedings (Turtle Bay, Hawaii, October 12-15, 1986).

ERIC Educational Resources Information Center

National Univ. Continuing Education Association, Los Angeles, CA. Region VI.

These 15 presentations are from a conference held to draw attention to the importance of countries bordering the Pacific Ocean and their contributions to continuing education. They provide perspectives on continuing education opportunities from the standpoint of programming, marketing, technology, and intercultural relations. Presentations include…

Reexamining the Ethics of Nuclear Technology.

PubMed

Andrianov, Andrei; Kanke, Victor; Kuptsov, Ilya; Murogov, Viktor

2015-08-01

This article analyzes the present status, development trends, and problems in the ethics of nuclear technology in light of a possible revision of its conceptual foundations. First, to better recognize the current state of nuclear technology ethics and related problems, this article focuses on presenting a picture of the evolution of the concepts and recent achievements related to technoethics, based on the ethics of responsibility. The term 'ethics of nuclear technology' describes a multidisciplinary endeavor to examine the problems associated with nuclear technology through ethical frameworks and paradigms. Second, to identify the reasons for the intensification of efforts to develop ethics in relation to nuclear technology, this article presents an analysis of the recent situation and future prospects of nuclear technology deployment. This includes contradictions that have aggravated nuclear dilemmas and debates stimulated by the shortcomings of nuclear technology, as well as the need for the further development of a nuclear culture paradigm that is able to provide a conceptual framework to overcome nuclear challenges. Third, efforts in the field of nuclear technology ethics are presented as a short overview of particular examples, and the major findings regarding obstacles to the development of nuclear technology ethics are also summarized. Finally, a potential methodological course is proposed to overcome inaction in this field; the proposed course provides for the further development of nuclear technology ethics, assuming the axiological multidisciplinary problematization of the main concepts in nuclear engineering through the basic ethical paradigms: analytical, hermeneutical, and poststructuralist.

Turbine Based Combined/Combination Cycle/RTA Project Overview

NASA Technical Reports Server (NTRS)

Bartolotta, Paul A.; Quigley, Brian F.

2000-01-01

This viewgraph presentation gives an overview of the Revolutionary Turbine Accelerator (RTA) program. Details are given on the Single Stage To Orbit (SSTO) and Two Stage To Orbit (TSTO) aircraft, and the technological challenges associated with the RTA, SSTO, and TSTO.

New plastic recycling technology

EPA Science Inventory

Greater than 60% of the total plastic content of municipal solid waste is comprised of polyolefins (high-density, low-density, and linear polyethylene and polypropylene. Polyethylene (PE) is the largest-volume component but presents a challenge due to the absence of low-energy de...

Seven Steps for Success: Selecting IT Consultants

ERIC Educational Resources Information Center

Moriarty, Daniel F.

2004-01-01

Information technology (IT) presents community colleges with both powerful opportunities and formidable challenges. The prospects of expedited and more efficient business processes, greater student access through distance learning, improved communication, and strengthened relationships with students can embolden the most hesitant college…

Poised for the Millennium.

ERIC Educational Resources Information Center

Agron, Joe, Ed.

1999-01-01

Presents advice from five school administrators on how schools are meeting facility and business challenges in the new millennium. Issues discussed concern power needs, the Y2K computer problem, the explosion of new educational technology, school security, educational finance, and building deterioration. (GR)

Technotown: A LEGO Experience. [and] Technotown: A School-Wide Design Technology Project.

ERIC Educational Resources Information Center

Belch, Harry; Knobloch, Stephan F.

1994-01-01

Describes how 900 elementary students planned, designed, and constructed Technotown out of 1 million LEGO pieces. Presents a learning activity (objectives, materials, challenge, evaluation, and closing thoughts) on the building of a subway system for Technotown. (SK)

Improving the Collection of Race, Ethnicity, and Language Data to Reduce Healthcare Disparities: A Case Study from an Academic Medical Center

PubMed Central

Lee, Wei-Chen; Veeranki, Sreenivas P.; Serag, Hani; Eschbach, Karl; Smith, Kenneth D.

2016-01-01

Well-designed electronic health records (EHRs) must integrate a variety of accurate information to support efforts to improve quality of care, particularly equity-in-care initiatives. This case study provides insight into the challenges those initiatives may face in collecting accurate race, ethnicity, and language (REAL) information in the EHR. We present the experience of an academic medical center strengthening its EHR for better collection of REAL data with funding from the EHR Incentive Programs for meaningful use of health information technology and the Texas Medicaid 1115 Waiver program. We also present a plan to address some of the challenges that arose during the course of the project. Our experience at an academic medical center can provide guidance about the likely challenges similar institutions may expect when they implement new initiatives to collect REAL data, particularly challenges regarding scope, personnel, and other resource needs. PMID:27843424

Long-Term Preservation of NASA Heliophysics Data and Access: Where We Were and Where We're Going

NASA Technical Reports Server (NTRS)

McGuire, Robert E.

2011-01-01

The importance of ensuring preservation and useful access to the unique science potential of past, present and future NASA solar and space physics (i.e. heliophysics) data has been recognized since the inception of NASA but remains challenging. In this talk, I will briefly review the history of this topic and and then discuss the present NASA model for heliophysics science data management, including key current resources for finding and using data projects like the Space Physics Data Facility. I will highlight expected future directions, building on working elements of the present program and exploiting new technology, to further improve the data environment, address existing issues and anticipate emerging challenges.

Lightweight, High Strength Metals With Enhanced Radiation Shielding - Technology Advancing Partnerships Challenge Project

NASA Technical Reports Server (NTRS)

Wright, Maria Clara (Compiler)

2015-01-01

The Technology Advancing Partnership (TAP) Challenge will seek to foster innovation throughout the Center by allowing the KSC workforce to identify a specific technology idea that needs improvement and to then work with an external partner to develop that technology. This Challenge will enable competitive partnerships with outside entities that will increase the value by bringing leveraged resources. The selected proposal from the University of Florida will develop new lightweight technologies with radiation mitigation for spacecraft.

[Innovations in education for the digital student].

PubMed

Koopman, P; Vervoorn, J M

2012-06-01

A significant percentage of today's teaching staff received their professional training before the revolution in information and communication technology took place. Students, by contrast, are so-called 'digital natives': they grew up surrounded by digital technology. Present day students are used to multi-tasking and expect to be facilitated in using educationalfacilities regardless of time and place. Adapting higher education to present day students' study behaviour and expectations requires reconsideration of educationalform and methods. Several types of staff can be distinguished in their attitude towards technological innovation in education. Among them are staff who are reluctant in accepting innovations. Dental schools face the challenge of finding supportfor innovations with all their teaching staff and to better adapt to the twenty-first century student. In order to introduce technological innovations successfully, students need to become involved and sufficient attention must be paid to qualifying instructors.

Microhydraulic transducer technology for actuation and power generation

NASA Astrophysics Data System (ADS)

Hagood, Nesbitt W.; Roberts, David C.; Saggere, Laxminarayana; Breuer, Kenneth S.; Chen, Kuo-Shen; Carretero, Jorge A.; Li, Hanqing; Mlcak, Richard; Pulitzer, Seward W.; Schmidt, Martin A.; Spearing, S. Mark; Su, Yu-Hsuan

2000-06-01

The paper introduces a novel transducer technology, called the solid-state micro-hydraulic transducer, currently under development at MIT. The new technology is enabled through integration of micromachining technology, piezoelectrics, and microhydraulic concepts. These micro-hydraulic transducers are capable of bi-directional electromechanical energy conversion, i.e., they can operate as both an actuator that supplies high mechanical force in response to electrical input and an energy generator that transduces electrical energy from mechanical energy in the environment. These transducers are capable of transducing energy at very high specific power output in the order of 1 kW/kg, and thus, they have the potential to enable many novel applications. The concept, the design, and the potential applications of the transducers are presented. Present efforts towards the development of these transducers, and the challenges involved therein, are also discussed.

Issues surrounding the health economic evaluation of genomic technologies

PubMed Central

Buchanan, James; Wordsworth, Sarah; Schuh, Anna

2014-01-01

Aim Genomic interventions could enable improved disease stratification and individually tailored therapies. However, they have had a limited impact on clinical practice to date due to a lack of evidence, particularly economic evidence. This is partly because health economists are yet to reach consensus on whether existing methods are sufficient to evaluate genomic technologies. As different approaches may produce conflicting adoption decisions, clarification is urgently required. This article summarizes the methodological issues associated with conducting economic evaluations of genomic interventions. Materials & methods A structured literature review was conducted to identify references that considered the methodological challenges faced when conducting economic evaluations of genomic interventions. Results Methodological challenges related to the analytical approach included the choice of comparator, perspective and timeframe. Challenges in costing centered around the need to collect a broad range of costs, frequently, in a data-limited environment. Measuring outcomes is problematic as standard measures have limited applicability, however, alternative metrics (e.g., personal utility) are underdeveloped and alternative approaches (e.g., cost–benefit analysis) underused. Effectiveness data quality is weak and challenging to incorporate into standard economic analyses, while little is known about patient and clinician behavior in this context. Comprehensive value of information analyses are likely to be helpful. Conclusion Economic evaluations of genomic technologies present a particular challenge for health economists. New methods may be required to resolve these issues, but the evidence to justify alternative approaches is yet to be produced. This should be the focus of future work in this field. PMID:24236483

Micro- and nanodevices integrated with biomolecular probes.

PubMed

Alapan, Yunus; Icoz, Kutay; Gurkan, Umut A

2015-12-01

Understanding how biomolecules, proteins and cells interact with their surroundings and other biological entities has become the fundamental design criterion for most biomedical micro- and nanodevices. Advances in biology, medicine, and nanofabrication technologies complement each other and allow us to engineer new tools based on biomolecules utilized as probes. Engineered micro/nanosystems and biomolecules in nature have remarkably robust compatibility in terms of function, size, and physical properties. This article presents the state of the art in micro- and nanoscale devices designed and fabricated with biomolecular probes as their vital constituents. General design and fabrication concepts are presented and three major platform technologies are highlighted: microcantilevers, micro/nanopillars, and microfluidics. Overview of each technology, typical fabrication details, and application areas are presented by emphasizing significant achievements, current challenges, and future opportunities. Copyright © 2015 Elsevier Inc. All rights reserved.

Additive Manufacturing and High-Performance Computing: a Disruptive Latent Technology

NASA Astrophysics Data System (ADS)

Goodwin, Bruce

2015-03-01

This presentation will discuss the relationship between recent advances in Additive Manufacturing (AM) technology, High-Performance Computing (HPC) simulation and design capabilities, and related advances in Uncertainty Quantification (UQ), and then examines their impacts upon national and international security. The presentation surveys how AM accelerates the fabrication process, while HPC combined with UQ provides a fast track for the engineering design cycle. The combination of AM and HPC/UQ almost eliminates the engineering design and prototype iterative cycle, thereby dramatically reducing cost of production and time-to-market. These methods thereby present significant benefits for US national interests, both civilian and military, in an age of austerity. Finally, considering cyber security issues and the advent of the ``cloud,'' these disruptive, currently latent technologies may well enable proliferation and so challenge both nuclear and non-nuclear aspects of international security.

Detection and quantification of explosives and CWAs using a handheld widely tunable quantum cascade laser

NASA Astrophysics Data System (ADS)

Deutsch, Erik R.; Haibach, Frederick G.; Mazurenko, Alexander

2012-06-01

The requirements for standoff detection of Explosives and CWA/TICs on surfaces in the battlefield are challenging because of the low detection limits. The variety of targets, backgrounds and interferences increase the challenges. Infrared absorption spectroscopy with traditional infrared detection technologies, incandescent sources that offer broad wavelength range but poor spectral intensity, are particularly challenged in standoff applications because most photons are lost to the target, background and the environment. Using a brighter source for active infrared detection e.g. a widely-tunable quantum cascade laser (QCL) source, provides sufficient spectral intensity to achieve the needed sensitivity and selectivity for explosives, CWAs, and TICs on surfaces. Specific detection of 1-10 μg/cm2 is achieved within seconds. CWAs, and TICs in vapor and aerosol form present a different challenge. Vapors and aerosols are present at low concentrations, so long pathlengths are required to achieve the desired sensitivity. The collimated output beam from the QCL simplifies multi-reflection cells for vapor detection while also enabling large standoff distances. Results obtained by the QCL system indicate that <1 ppm for vapors can be achieved with specificity in a measurement time of seconds, and the QCL system was successfully able to detect agents in the presence of interferents. QCLs provide additional capabilities for the dismounted warfighter. Given the relatively low power consumption, small package, and instant-on capability of the QCL, a handheld device can provide field teams with early detection of toxic agents and energetic materials in standoff, vapor, or aerosol form using a single technology and device which makes it attractive compared other technologies.

Pervasive healthcare: paving the way for a pervasive, user-centered and preventive healthcare model.

PubMed

Arnrich, B; Mayora, O; Bardram, J; Tröster, G

2010-01-01

The aging of the population creates pressure on the healthcare systems in various ways. A massive increase of chronic disease conditions and age-related illness are predicted as the dominant forces driving the future health care. The objective of this paper is to present future research demands in pervasive healthcare with the goal to meet the healthcare challenges by paving the way for a pervasive, user-centered and preventive healthcare model. This paper presents recent methodological approaches and proposes future research topics in three areas: i) pervasive, continuous and reliable long-term monitoring systems; ii) prevention through pervasive technology as a key element to maintain lifelong wellness; and iii) design and evaluation methods for ubiquitous, patient-centric technologies. Pervasive technology has been identified as a strong asset for achieving the vision of user-centered preventive healthcare. In order to make this vision a reality, new strategies for design, development and evaluation of technology have to find a common denominator and consequently interoperate. Moreover, the potential of pervasive healthcare technologies offers new opportunities beyond traditional disease treatment and may play a major role in prevention, e.g. motivate healthy behavior and disease prevention throughout all stages of life. In this sense, open challenges in future research have to be addressed such as the variability of health indicators between individuals and the manner in which relevant health indicators are provided to the users in order to maximize their motivation to mitigate or prevent unhealthy behaviors. Additionally, collecting evidence that pervasive technology improves health is seen as one of the toughest challenges. Promising approaches are recently introduced, such as "clinical proof-of-concept" and balanced observational studies. The paper concludes that pervasive healthcare will enable a paradigm shift from the established centralized healthcare model to a pervasive, user-centered and preventive overall lifestyle health management. In order to provide these new opportunities everywhere, anytime and to anyone, future research in the fields of pervasive sensing, pervasive prevention and evaluation of pervasive technology is inevitably needed.

Emerging Regenerative Approaches for Periodontal Reconstruction: Practical Applications From the AAP Regeneration Workshop

PubMed Central

Rios, Hector F.; Bashutski, Jill D.; McAllister, Bradley S.; Murakami, Shinya; Cobb, Charles M.; Chun, Yong-Hee Patricia; Lin, Zhao; Mandelaris, George A.; Cochran, David L.

2015-01-01

Focused Clinical Question Can emerging technologies for periodontal regeneration become clinical reality? Summary Emerging technologies are presenting options to hopefully improve the outcomes of regeneration in challenging clinical scenarios. Cellular allografts represent a current technology in which cells and scaffolds are being delivered directly to the periodontal lesion. Recombinant human fibroblast growth factor 2 and teriparatide (parathyroid 1–34) have each been tested in controlled prospective human randomized clinical trials, and both have been shown to have potential for periodontal regeneration. These examples, as well as other emerging technologies, show promise for continued advancement in the field of periodontal regenerative therapy. Conclusions At present, there are indications that emerging technologies can be used successfully for periodontal regeneration. Case reports and clinical trials are being conducted with a variety of emerging technologies. However, many are yet to be approved by a regulatory agency, or there is a lack of evidence-based literature to validate their expanded use. PMID:26146593

Technology Area Roadmap for In Space Propulsion Technologies

NASA Technical Reports Server (NTRS)

Johnson, Les; Meyer, Mike; Coote, David; Goebel, Dan; Palaszewski, Bryan; White, Sonny

2010-01-01

This slide presentation reviews the technology area (TA) roadmap to develop propulsion technologies that will be used to enable further exploration of the solar system, and beyond. It is hoped that development of the technologies within this TA will result in technical solutions that will improve thrust levels, specific impulse, power, specific mass, volume, system mass, system complexity, operational complexity, commonality with other spacecraft systems, manufacturability and durability. Some of the propulsion technologies that are reviewed include: chemical and non-chemical propulsion, and advanced propulsion (i.e., those with a Technology Readiness level of less than 3). Examples of these advanced technologies include: Beamed Energy, Electric Sail, Fusion, High Energy Density Materials, Antimatter, Advanced Fission and Breakthrough propulsion technologies. Timeframes for development of some of these propulsion technologies are reviewed, and top technical challenges are reviewed. This roadmap describes a portfolio of in-space propulsion technologies that can meet future space science and exploration needs.

Calculation of surface potentials at the silica–water interface using molecular dynamics: Challenges and opportunities

NASA Astrophysics Data System (ADS)

Lowe, Benjamin M.; Skylaris, Chris-Kriton; Green, Nicolas G.; Shibuta, Yasushi; Sakata, Toshiya

2018-04-01

Continuum-based methods are important in calculating electrostatic properties of interfacial systems such as the electric field and surface potential but are incapable of providing sufficient insight into a range of fundamentally and technologically important phenomena which occur at atomistic length-scales. In this work a molecular dynamics methodology is presented for interfacial electric field and potential calculations. The silica–water interface was chosen as an example system, which is highly relevant for understanding the response of field-effect transistors sensors (FET sensors). Detailed validation work is presented, followed by the simulated surface charge/surface potential relationship. This showed good agreement with experiment at low surface charge density but at high surface charge density the results highlighted challenges presented by an atomistic definition of the surface potential. This methodology will be used to investigate the effect of surface morphology and biomolecule addition; both factors which are challenging using conventional continuum models.

Recent trends for practical rehabilitation robotics, current challenges and the future.

PubMed

Yakub, Fitri; Md Khudzari, Ahmad Zahran; Mori, Yasuchika

2014-03-01

This paper presents and studies various selected literature primarily from conference proceedings, journals and clinical tests of the robotic, mechatronics, neurology and biomedical engineering of rehabilitation robotic systems. The present paper focuses of three main categories: types of rehabilitation robots, key technologies with current issues and future challenges. Literature on fundamental research with some examples from commercialized robots and new robot development projects related to rehabilitation are introduced. Most of the commercialized robots presented in this paper are well known especially to robotics engineers and scholars in the robotic field, but are less known to humanities scholars. The field of rehabilitation robot research is expanding; in light of this, some of the current issues and future challenges in rehabilitation robot engineering are recalled, examined and clarified with future directions. This paper is concluded with some recommendations with respect to rehabilitation robots.

Robust intelligent flight control for hypersonic vehicles. Ph.D. Thesis - Massachusetts Inst. of Technology

NASA Technical Reports Server (NTRS)

Chamitoff, Gregory Errol

1992-01-01

Intelligent optimization methods are applied to the problem of real-time flight control for a class of airbreathing hypersonic vehicles (AHSV). The extreme flight conditions that will be encountered by single-stage-to-orbit vehicles, such as the National Aerospace Plane, present a tremendous challenge to the entire spectrum of aerospace technologies. Flight control for these vehicles is particularly difficult due to the combination of nonlinear dynamics, complex constraints, and parametric uncertainty. An approach that utilizes all available a priori and in-flight information to perform robust, real time, short-term trajectory planning is presented.

Engineering complex tissues.

PubMed

Atala, Anthony; Kasper, F Kurtis; Mikos, Antonios G

2012-11-14

Tissue engineering has emerged at the intersection of numerous disciplines to meet a global clinical need for technologies to promote the regeneration of functional living tissues and organs. The complexity of many tissues and organs, coupled with confounding factors that may be associated with the injury or disease underlying the need for repair, is a challenge to traditional engineering approaches. Biomaterials, cells, and other factors are needed to design these constructs, but not all tissues are created equal. Flat tissues (skin); tubular structures (urethra); hollow, nontubular, viscus organs (vagina); and complex solid organs (liver) all present unique challenges in tissue engineering. This review highlights advances in tissue engineering technologies to enable regeneration of complex tissues and organs and to discuss how such innovative, engineered tissues can affect the clinic.

ARPA-E: Inspiring Energy Innovators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babinec, Sue; Wessells, Colin; Zakhor, Avideh

2016-03-01

ARPA-E is supporting some of the best and brightest scientific minds across the country to turn aspirational ideas into tangible technology options. By presenting an ambitious energy challenge to the U.S. research and development community, ARPA-E attracts ideas from a diverse group of innovators, representing traditional and non-traditional energy backgrounds, who look to address energy challenges in new and exciting ways. Founder and CEO of Alveo Energy Dr. Colin Wessels and Co-Founder and CEO of Indoor Reality Dr. Avideh Zakhor are two ARPA-E project investigators that have made great progress, with support from the ARPA-E Tech-to-Market team, in advancing theirmore » technologies out of the lab and into the marketplace.« less

Sensium: an ultra-low-power wireless body sensor network platform: design & application challenges.

PubMed

Wong, A W; McDonagh, D; Omeni, O; Nunn, C; Hernandez-Silveira, M; Burdett, A J

2009-01-01

In this paper we present a system-on-chip for wireless body sensor networks, which integrates a transceiver, hardware MAC protocol, microprocessor, IO peripherals, memories, ADC and custom sensor interfaces. Addressing the challenges in the design, this paper will continue to discuss the issues in the applications of this technology to body worn monitoring for real-time measurement of ECG, heart rate, physical activity, respiration and/or skin temperature. Two application challenges are described; the real-time measurement of energy expenditure using the LifePebble, and; the development issues surrounding the 'Digital Patch'.

Technology: Today and Tomorrow. Proceedings of the Spring Meeting of the Nebraska Library Association--College and University Section and Special and Institutional Section (Fremont, Nebraska, May 22, 1992).

ERIC Educational Resources Information Center

Pearson, Debra, Ed.

The papers presented at this conference challenged participants to become an integral part of the planning necessary to keep libraries on the cutting edge of technological advances. Academic libraries are admonished to reposition themselves to deliver both new and traditional services, or face the prospect of being preempted by other agencies. The…

Automated Cooperative Trajectories

NASA Technical Reports Server (NTRS)

Hanson, Curt; Pahle, Joseph; Brown, Nelson

2015-01-01

This presentation is an overview of the Automated Cooperative Trajectories project. An introduction to the phenomena of wake vortices is given, along with a summary of past research into the possibility of extracting energy from the wake by flying close parallel trajectories. Challenges and barriers to adoption of civilian automatic wake surfing technology are identified. A hardware-in-the-loop simulation is described that will support future research. Finally, a roadmap for future research and technology transition is proposed.

Digital slides: present status of a tool for consultation, teaching, and quality control in pathology.

PubMed

Rocha, Rafael; Vassallo, José; Soares, Fernando; Miller, Keith; Gobbi, Helenice

2009-01-01

In the last few years, telepathology has benefited from the progress in the technology of image digitalization and transmission through the world web. The applications of telepathology and virtual imaging are more current in research and morphology teaching. In surgical pathology daily practice, this technology still has limits and is more often used for case consultation. In the present review, we intend to discuss its applications and challenges for pathologists and scientists. Much of the limitations of virtual imaging for the surgical pathologist reside in the capacity of storage of images, which so far has hindered the more widespread use of this technology. Overcoming this major drawback may revolutionize the surgical pathologist's activity and slide storing.

The Potential and Challenges of Digital Well-Being Interventions: Positive Technology Research and Design in Light of the Bitter-Sweet Ambivalence of Change.

PubMed

Diefenbach, Sarah

2018-01-01

Along with the dissemination of technical assistance in nearly every part of life, there has been growing interest in the potential of technology to support well-being and human flourishing. "Positive technology" thereby takes the responsible role of a "digital coach," supporting people in achieving personal goals and behavior change. The design of such technology requires knowledge of different disciplines such as psychology, design and human-computer interaction. However, possible synergies are not yet used to full effect, and it needs common frameworks to support a more deliberate design of the "therapeutic interaction" mediated through technology. For positive technology design, positive psychology, and resource oriented approaches appear as particularly promising starting point. Besides a general fit of the basic theoretical conceptions of human change, many elements of established interventions could possibly be transferred to technology design. However, besides the power of focusing on the positive, another psychological aspect to consider are the bitter components inherent to change, such as the confrontation with a negative status quo, threat of self-esteem, and the effort required. The present research discusses the general potential and challenges within positive technology design from an interdisciplinary perspective with theoretical and practical contributions. Based on the bitter-sweet ambivalence of change as present in many psychological approaches of motivation and behavior change, the bitter-sweet continuum serves as a proxy for the mixed emotions and cognitions related to change. An empirical investigation of those factors among 177 users of self-improvement technologies provides initial support for the usefulness of the bitter-sweet perspective in understanding change dynamics. In a next step, the bitter-sweet concept is transformed into different design strategies to support positive change. The present article aims to deepen the discussion about the responsible role of technology as a well-being enhancement tool and to provide a fruitful frame for different disciplines involved in positive technology. Two aspects are highlighted: First, investigating well-being technology as a form of "therapeutic interaction," focusing on the need for sensible design solutions in the emerging dialogue between technology and user. Second, a stronger consideration of the bitter-sweet ambivalence of change, utilizing (positive) psychology interventions to full effect.

The Development of Solar Sail Propulsion for NASA Science Missions to the Inner Solar System

NASA Technical Reports Server (NTRS)

Montgomery, Edward E, IV; Johnson, Charles Les

2004-01-01

This paper examines recent assessments of the technology challenges facing solar sails, identifies the systems and technologies needing development, and the approach employed by NASA's In-space Propulsion Program in NASA to achieve near term products that move this important technology from low technology readiness level (TRL) toward the goal of application to science missions in near earth space and beyond. The status of on-going efforts to design, build, and test ground demonstrators of alternate approaches to structures (inflatable versus rigid), membrane materials, optical shape sensing, and attitude control will be presented along with planned future investments.

Schedule Risks Due to Delays in Advanced Technology Development

NASA Technical Reports Server (NTRS)

Reeves, John D. Jr.; Kayat, Kamal A.; Lim, Evan

2008-01-01

This paper discusses a methodology and modeling capability that probabilistically evaluates the likelihood and impacts of delays in advanced technology development prior to the start of design, development, test, and evaluation (DDT&E) of complex space systems. The challenges of understanding and modeling advanced technology development considerations are first outlined, followed by a discussion of the problem in the context of lunar surface architecture analysis. The current and planned methodologies to address the problem are then presented along with sample analyses and results. The methodology discussed herein provides decision-makers a thorough understanding of the schedule impacts resulting from the inclusion of various enabling advanced technology assumptions within system design.

NASA programs in technology transfer and their relation to remote sensing education

NASA Technical Reports Server (NTRS)

Weinstein, R. H.

1980-01-01

Technology transfer to users is a central feature of NASA programs. In each major area of responsibility, a variety of mechanisms was established to provide for this transfer of operational capability to the proper end user, be it a Federal agency, industry, or other public sector users. In addition, the Technology Utilization program was established to cut across all program areas and to make available a wealth of 'spinoff' technology (i.e., secondary applications of space technology to ground-based use). The transfer of remote sensing technology, particularly to state and local users, presents some real challenges in application and education for NASA and the university community. The agency's approach to the transfer of remote sensing technology and the current and potential role of universities in the process are considered.

A systems approach to purchasing and implementing new technology.

PubMed

Kinney, Kristin

2007-01-01

There are many risks associated with purchasing and implementing new technology. The challenge is to reduce these risks to gain maximum benefit from the new technology purchased. In the high-cost world of healthcare, there is little room for wasting time and money related to technology implementation. If the workflow of the current system is not adequately understood before purchasing and implementing a new technology, that technology may mask underlying problems and/or create new ones. The purpose of this article is to present a framework for analyzing the current process or system, identifying the strengths and the areas in need of improvement. A thorough understanding of the problems with the current system and the barriers to change is necessary to ensure the selection of the "right" technology and promote its implementation.

Overcoming Challenges of the Technological Age by Teaching Information Literacy Skills

ERIC Educational Resources Information Center

Burke, Melynda

2010-01-01

The technological age has forever altered every aspect of life and work. Technology has changed how people locate and view information. However, the transition from print to electronic formats has created numerous challenges for individuals to overcome. These challenges include coping with the massive amounts of information bombarding people and…

Patent and license pearls and pitfalls for taking an idea to the marketplace.

PubMed

Mukharji, Indrani

2011-06-01

Technology transfer is the process by which novel ideas at academic institutions emanating from research supported by public and private funds are transferred to the private sector for developing marketable products for public use and benefit. Because the primary mission of universities is education and research, technology transfer in an academic environment introduces many challenges. This field is new to most faculty members and is seldom a core mission of their academic careers. The process is also new and unfamiliar to most university administrators. However, universities are increasingly challenged to demonstrate how their research with public funds translates into public benefit. Technology transfer by universities has taken on a new dimension with a focus first on protecting the intellectual property emanating from academic research, then finding means to develop and commercialize such intellectual property for launching new products in the market for public use and benefit. The Bayh-Dole Act enacted in 1980 (Public Law 96-517) allowed universities to elect to retain title to inventions arising from their federally funded research and to grant licenses to the patents, copyrights, or trademarks deriving from these inventions. Universities are allowed to retain the royalties and to share them with the inventors. This article presents the perspectives of technology transfer professionals, specifically, what technology transfer offices do or can do to assist researchers with commercialization of the novel ideas in biomedical research. It also provides a list of successful therapeutics that stemmed from academic research. In conclusion, reference is made to some of the challenges of technology transfer.

Challenges of future aircraft propulsion: A review of distributed propulsion technology and its potential application for the all electric commercial aircraft

NASA Astrophysics Data System (ADS)

Gohardani, Amir S.; Doulgeris, Georgios; Singh, Riti

2011-07-01

This paper highlights the role of distributed propulsion technology for future commercial aircraft. After an initial historical perspective on the conceptual aspects of distributed propulsion technology and a glimpse at numerous aircraft that have taken distributed propulsion technology to flight, the focal point of the review is shifted towards a potential role this technology may entail for future commercial aircraft. Technological limitations and challenges of this specific technology are also considered in combination with an all electric aircraft concept, as means of predicting the challenges associated with the design process of a next generation commercial aircraft.

Cervical cancer data and data systems in limited-resource settings: Challenges and opportunities.

PubMed

Drummond, Jennifer L; Were, Martin C; Arrossi, Silvina; Wools-Kaloustian, Kara

2017-07-01

Appropriate collection and use of health information is critical to the planning, scaling up, and improvement of cervical cancer programs. The health information systems implementation landscape is unique to each country; however, systems serving cervical cancer programs in low-resource settings share characteristics that present common challenges. In response, many programs have taken innovative approaches to generating the quality information needed for decision making. Recent advances in health information technology also provide feasible solutions to challenges. This article draws from the experiences of the authors and from current literature to describe outstanding challenges and promising practices in the implementation of cervical cancer data systems, and to make recommendations for next steps. Recommendations include engaging all stakeholders-including providers, program managers, implementing partners, and donors-in promoting national, district, and community information systems; building on existing systems and processes, as well as introducing new technologies; and evolving data collection and data systems as programs advance. © 2017 The Authors. International Journal of Gynecology & Obstetrics published by John Wiley & Sons Ltd on behalf of International Federation of Gynecology and Obstetrics.

Fuselage mounted anti-collision lights utilizing high power LEDs

NASA Astrophysics Data System (ADS)

Lundberg, John; Machi, Nicolo; Mangum, Scott; Singer, Jeffrey

2005-09-01

As LEDs continue to improve in efficacy and total light output, they are increasingly finding their way in to new applications in the aviation industry as well as adjacent markets. One function that is particularly challenging and may reap substantial benefits from this new technology is the fuselage mounted anti-collision light. Anti-collision lights provide conspicuity for the aircraft by periodically emitting bright flashes of light. The color, light distribution and intensity levels for these lights are all closely regulated through Federal Aviation Regulation (FAR) documents. These lighting requirements, along with thermal, environmental and aerodynamic requirements, drive the overall design. In this paper, we will discuss the existing technologies used in anti-collision lights and the advantages and challenges associated with an LED solution. Particular attention will be given to the optical, thermal, electrical and aerodynamic aspects associated with an LED approach. A specific case study will be presented along with some of the challenges that have arisen during the design process. These challenges include the addition of an integrated covert anti-collision lighting.

Using Digital Technologies in Clinical HIV Research: Real-World Applications and Considerations for Future Work.

PubMed

Andriesen, Jessica; Bull, Sheana; Dietrich, Janan; Haberer, Jessica E; Van Der Pol, Barbara; Voronin, Yegor; Wall, Kristin M; Whalen, Christopher; Priddy, Frances

2017-07-31

Digital technologies, especially if used in novel ways, provide a number of potential advantages to clinical research in trials related to human immunodeficiency virus (HIV) and acquired immune deficiency syndrome (AIDS) and may greatly facilitate operations as well as data collection and analysis. These technologies may even allow answering questions that are not answerable with older technologies. However, they come with a variety of potential concerns for both the participants and the trial sponsors. The exact challenges and means for alleviation depend on the technology and on the population in which it is deployed, and the rapidly changing landscape of digital technologies presents a challenge for creating future-proof guidelines for technology application. The aim of this study was to identify and summarize some common themes that are frequently encountered by researchers in this context and highlight those that should be carefully considered before making a decision to include these technologies in their research. In April 2016, the Global HIV Vaccine Enterprise surveyed the field for research groups with recent experience in novel applications of digital technologies in HIV clinical research and convened these groups for a 1-day meeting. Real-world uses of various technologies were presented and discussed by 46 attendees, most of whom were researchers involved in the design and conduct of clinical trials of biomedical HIV prevention and treatment approaches. After the meeting, a small group of organizers reviewed the presentations and feedback obtained during the meeting and categorized various lessons-learned to identify common themes. A group of 9 experts developed a draft summary of the findings that was circulated via email to all 46 attendees for review. Taking into account the feedback received, the group finalized the considerations that are presented here. Meeting presenters and attendees discussed the many successful applications of digital technologies to improve research outcomes, such as those for recruitment and enrollment, participant identification, informed consent, data collection, data quality, and protocol or treatment adherence. These discussions also revealed unintended consequence of technology usage, including risks to study participants and risks to study integrity. Key lessons learned from these discussions included the need to thoroughly evaluate systems to be used, the idea that early success may not be sustained throughout the study, that some failures will occur, and considerations for study-provided devices. Additionally, taking these key lessons into account, the group generated recommendations on how to move forward with the use of technology in HIV vaccine and biomedical prevention trials. ©Jessica Andriesen, Sheana Bull, Janan Dietrich, Jessica E Haberer, Barbara Van Der Pol, Yegor Voronin, Kristin M Wall, Christopher Whalen, Frances Priddy. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 31.07.2017.

Aerospace Measurements: Challenges and Opportunities

NASA Technical Reports Server (NTRS)

Conway, Bruce A.

1992-01-01

New aerospace research initiatives offer both challenges and opportunities to rapidly-emerging electronics and electro-optics technology. Defining and implementing appropriate measurement technology development programs in response to the aeronautical ground facility research and testing needs of the new initiatives poses some particularly important problems. This paper discusses today's measurement challenges along with some of the technological opportunities which offer some hope for meeting the challenges, and describes measurement technology activities currently underway in the Langley Research Center's Instrument Research Division to address modern aerospace research and design engineering requirements. Projected and realized benefits and payoffs from the ongoing measurement and instrumentation efforts will be emphasized. A discussion of future trends in the aerospace measurement technology field will be included.

Challenges and the state of the technology for printed sensor arrays for structural monitoring

NASA Astrophysics Data System (ADS)

Joshi, Shiv; Bland, Scott; DeMott, Robert; Anderson, Nickolas; Jursich, Gregory

2017-04-01

Printed sensor arrays are attractive for reliable, low-cost, and large-area mapping of structural systems. These sensor arrays can be printed on flexible substrates or directly on monitored structural parts. This technology is sought for continuous or on-demand real-time diagnosis and prognosis of complex structural components. In the past decade, many innovative technologies and functional materials have been explored to develop printed electronics and sensors. For example, an all-printed strain sensor array is a recent example of a low-cost, flexible and light-weight system that provides a reliable method for monitoring the state of aircraft structural parts. Among all-printing techniques, screen and inkjet printing methods are well suited for smaller-scale prototyping and have drawn much interest due to maturity of printing procedures and availability of compatible inks and substrates. Screen printing relies on a mask (screen) to transfer a pattern onto a substrate. Screen printing is widely used because of the high printing speed, large selection of ink/substrate materials, and capability of making complex multilayer devices. The complexity of collecting signals from a large number of sensors over a large area necessitates signal multiplexing electronics that need to be printed on flexible substrate or structure. As a result, these components are subjected to same deformation, temperature and other parameters for which sensor arrays are designed. The characteristics of these electronic components, such as transistors, are affected by deformation and other environmental parameters which can lead to erroneous sensed parameters. The manufacturing and functional challenges of the technology of printed sensor array systems for structural state monitoring are the focus of this presentation. Specific examples of strain sensor arrays will be presented to highlight the technical challenges.

Surrogate Joint Aerial Layer Network (JALN) Experiment: Applications of Commercial-Off-The-Shelf Technologies for Researching Future JALN Challenges

DTIC Science & Technology

2014-12-01

CHALLENGES DECEMBER 2014 TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED STINFO COPY AIR FORCE RESEARCH LABORATORY INFORMATION...JOINT AERIAL LAYER NETWORK (JALN) EXPERIMENT: APPLICATION OF COMMERCIAL-OFF-THE-SHELF TECHNOLOGIES FOR RESEARCHING FUTURE JALN CHALLENGES 5a... challenge JALN developers. The use of low-cost COTS wireless technology is found to be a suitable surrogate for military hardware for investigating

US EPA Testing of LP & MP UV Disinfection Technologies

EPA Science Inventory

Presentation will discuss the ongoing USEPA research on UV disinfection addressing the following objectives: Conservatively predict log inactivation and RED of adenovirus with surrogates; Conduct many (LP=61) UV reactor conditions challenged with Ad2, B. pumilus, and MS2 & conduc...

Students' Experiences of Learning in a Virtual Classroom

ERIC Educational Resources Information Center

Gedera, Dilani S. P.

2014-01-01

Online learning environments can offer learners opportunities for flexibility, interaction and collaboration distinctly different from face-to-face learning environments. However, the integration of educational technologies also presents challenges and concerns in relation to students' learning. This article attempts to develop a better…

Technology-Supported Inquiry for Learning about Aquatic Ecosystems

ERIC Educational Resources Information Center

Hmelo-Silver, Cindy E.; Eberbach, Catherine; Jordan, Rebecca

2014-01-01

Understanding ecosystems is challenging, but important for becoming environmentally-literate citizens of today's society. People have difficulty considering how different components, mechanisms, and phenomena, both visible and invisible, are interconnected within ecosystems. This research presents both the design and initial testing of an…

Research and Technology

NASA Technical Reports Server (NTRS)

1987-01-01

Selected achievements at the Ames-Moffett and Ames-Dryden sites of the Ames Research Center are illustrated. The challenging work that was accomplished in the past year is presented for the following areas: engineering and technical services, aerospace systems, flight operations and research, aerophysics, and space research.

Retention-Oriented Curricular Design

ERIC Educational Resources Information Center

Milanovic, Ivana; Eppes, Tom A.; Girouard, Janice; Townsend, Lee

2010-01-01

This paper presents a retention-oriented approach to the educational value stream within the STEM undergraduate area. Faced with several strategic challenges and opportunities, a Flex Advantage Plan was developed to enhance the undergraduate engineering technology programs and better utilize the curricular flexibilities inherent in the current…

NASA Game Changing Development Program Manufacturing Innovation Project

NASA Technical Reports Server (NTRS)

Tolbert, Carol; Vickers, John

2011-01-01

This presentation examines the new NASA Manufacturing Innovation Project. The project is a part of the Game Changing Development Program which is one element of the Space Technology Programs Managed by Office of the Chief Technologist. The project includes innovative technologies in model-based manufacturing, digital additive manufacturing, and other next generation manufacturing tools. The project is also coupled with the larger federal initiatives in this area including the National Digital Engineering and Manufacturing Initiative and the Advanced Manufacturing Partnership. In addition to NASA, other interagency partners include the Department of Defense, Department of Commerce, NIST, Department of Energy, and the National Science Foundation. The development of game-changing manufacturing technologies are critical for NASA s mission of exploration, strengthening America s manufacturing competitiveness, and are highly related to current challenges in defense manufacturing activities. There is strong consensus across industry, academia, and government that the future competitiveness of U.S. industry will be determined, in large part, by a technologically advanced manufacturing sector. This presentation highlights the prospectus of next generation manufacturing technologies to the challenges faced NASA and by the Department of Defense. The project focuses on maturing innovative/high payoff model-based manufacturing technologies that may lead to entirely new approaches for a broad array of future NASA missions and solutions to significant national needs. Digital manufacturing and computer-integrated manufacturing "virtually" guarantee advantages in quality, speed, and cost and offer many long-term benefits across the entire product lifecycle. This paper addresses key enablers and emerging strategies in areas such as: Current government initiatives, Model-based manufacturing, and Additive manufacturing.

Adopting Energy Efficiency in Connected Homes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christensen, Dane T; Kemper, Emily

This presentation on connected homes was presented at the 11th Rocky Mountain Utility Efficiency Exchange on September 28, 2017. The discussion covered the integration of energy efficiency measures and practices with Internet of Things (IoT) awareness and adoption of smart technologies and services via WiFi/ Bluetooth enabled home and office equipment. The presentation also describes the benefits to the home and business and benefits/challenges for the utility/implementer.

Phytoextraction of Cd-Contaminated Soils: Current Status and Future Challenges

PubMed Central

Li, Jin-Tian; Baker, Alan J. M.; Ye, Zhi-Hong; Wang, Hong-Bin; Shu, Wen-Sheng

2012-01-01

Cadmium (Cd) is one of the most toxic and widely distributed pollutants in the environment. Cadmium contamination of soils has posed a serious threat to safe food production in many parts of the world. The authors present a comprehensive review of present status of phytoextraction technology for cleaning up Cd-contaminated soils, based primarily on the data resulting from both laboratory and field-scale studies that have been conducted to assess or improve the Cd phytoextraction potential of various plant species in the past decade. The encouraging results of field-scale studies have provided a fundamental basis to usher phytoextraction technology into practical use to remediate slightly to moderately Cd-contaminated soils in Europe and Asia, although this technology is not yet ready for widespread application. Chelators and microorganisms tested so far seem not to contribute to the applicability of Cd phytoextraction. The major challenges for the large-scale application of Cd phytoextraction are (a) how to further improve the efficiency of Cd phytoextraction, (b) how to cut the overall costs of Cd phytoextraction, and (c) how to get greater stakeholders’ acceptance of Cd phytoextraction as a reliable option. PMID:23335842

Innovation, Novel Solutions and New Devices: The Engines that Drive the Magnetic Storage Industry; Choosing the Right Combination

NASA Astrophysics Data System (ADS)

Marinero, Ernesto E.

2011-03-01

Magnetic storage technology aims to achieve recording densities > 10 12 bits / in 2 intheforeseeablefuture . Thedimensionsofthemagneticdomainsandsensorminimumfeaturesizesatthisdensitywillbe ~ 15 -- 25 nm. These nanoscale dimensions present major challenges for both the materials utilized for magnetic recording, and to the sensors employed to reliably detect the minute magnetic fluxes emanating from such nanoscale domains. These include fundamental physical limits of material properties on account of the reduced dimensionality, as well as nanofabrication challenges to attain the required nanometer feature sizes with the stringent dimensional tolerances required. Since its invention in 1954, the storage density in magnetic recording has incremented by 109 and the cost of storage, measured in MB, has undergone a price reduction of the same order. Impressive as these accomplishments are, is the fact that the fundamental engineering principles of the technology today are essentially the same as when it was invented. This is in spite of numerous efforts to replace it with new alternative technologies or by dire predictions by its own practitioners of its impending death based on perceived limitations. In this talk the state-of-the art and challenges facing the HDD industry in its efforts to continue incrementing the storage density will be discussed. I will illustrate how advances in materials engineering, new physical phenomena and breakthroughs in nanofabrication have facilitated such an impressive technology evolution. Moreover, the key ingredients for said innovations to be implemented as technology solutions will be discussed..

Improving vaccine registries through mobile technologies: a vision for mobile enhanced Immunization information systems.

PubMed

Wilson, Kumanan; Atkinson, Katherine M; Deeks, Shelley L; Crowcroft, Natasha S

2016-01-01

Immunization registries or information systems are critical to improving the quality and evaluating the ongoing success of immunization programs. However, the completeness of these systems is challenged by a myriad of factors including the fragmentation of vaccine administration, increasing mobility of individuals, new vaccine development, use of multiple products, and increasingly frequent changes in recommendations. Mobile technologies could offer a solution, which mitigates some of these challenges. Engaging individuals to have more control of their own immunization information using their mobile devices could improve the timeliness and accuracy of data in central immunization information systems. Other opportunities presented by mobile technologies that could be exploited to improve immunization information systems include mobile reporting of adverse events following immunization, the capacity to scan 2D barcodes, and enabling bidirectional communication between individuals and public health officials. Challenges to utilizing mobile solutions include ensuring privacy of data, access, and equity concerns, obtaining consent and ensuring adoption of technology at sufficiently high rates. By empowering individuals with their own health information, mobile technologies can also serve as a mechanism to transfer immunization information as individuals cross local, regional, and national borders. Ultimately, mobile enhanced immunization information systems can help realize the goal of the individual, the healthcare provider, and public health officials always having access to the same immunization information. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The SMART Platform: early experience enabling substitutable applications for electronic health records.

PubMed

Mandl, Kenneth D; Mandel, Joshua C; Murphy, Shawn N; Bernstam, Elmer Victor; Ramoni, Rachel L; Kreda, David A; McCoy, J Michael; Adida, Ben; Kohane, Isaac S

2012-01-01

The Substitutable Medical Applications, Reusable Technologies (SMART) Platforms project seeks to develop a health information technology platform with substitutable applications (apps) constructed around core services. The authors believe this is a promising approach to driving down healthcare costs, supporting standards evolution, accommodating differences in care workflow, fostering competition in the market, and accelerating innovation. The Office of the National Coordinator for Health Information Technology, through the Strategic Health IT Advanced Research Projects (SHARP) Program, funds the project. The SMART team has focused on enabling the property of substitutability through an app programming interface leveraging web standards, presenting predictable data payloads, and abstracting away many details of enterprise health information technology systems. Containers--health information technology systems, such as electronic health records (EHR), personally controlled health records, and health information exchanges that use the SMART app programming interface or a portion of it--marshal data sources and present data simply, reliably, and consistently to apps. The SMART team has completed the first phase of the project (a) defining an app programming interface, (b) developing containers, and (c) producing a set of charter apps that showcase the system capabilities. A focal point of this phase was the SMART Apps Challenge, publicized by the White House, using http://www.challenge.gov website, and generating 15 app submissions with diverse functionality. Key strategic decisions must be made about the most effective market for further disseminating SMART: existing market-leading EHR vendors, new entrants into the EHR market, or other stakeholders such as health information exchanges.