Material Recover and Waste Form Development--2016 Accomplishments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Terry A.; Vienna, John; Paviet, Patricia

The Material Recovery and Waste Form Development (MRWFD) Campaign under the U.S. Department of Energy (DOE) Fuel Cycle Technologies (FCT) Program is responsible for developing advanced separation and waste form technologies to support the various fuel cycle options defined in the DOE Nuclear Energy Research and Development Roadmap, Report to Congress (April 2010). This MRWFD accomplishments report summarizes the results of the research and development (R&D) efforts performed within MRWFD in Fiscal Year (FY) 2016. Each section of the report contains an overview of the activities, results, technical point of contact, applicable references, and documents produced during the FY. Thismore » report briefly outlines campaign management and integration activities but primarily focuses on the many technical accomplishments of FY 2016. The campaign continued to use an engineering-driven, science-based approach to maintain relevance and focus.« less

Assembly mechanism of FCT region type 1 pili in serotype M6 Streptococcus pyogenes.

PubMed

Nakata, Masanobu; Kimura, Keiji Richard; Sumitomo, Tomoko; Wada, Satoshi; Sugauchi, Akinari; Oiki, Eiji; Higashino, Miharu; Kreikemeyer, Bernd; Podbielski, Andreas; Okahashi, Nobuo; Hamada, Shigeyuki; Isoda, Ryutaro; Terao, Yutaka; Kawabata, Shigetada

2011-10-28

The human pathogen Streptococcus pyogenes produces diverse pili depending on the serotype. We investigated the assembly mechanism of FCT type 1 pili in a serotype M6 strain. The pili were found to be assembled from two precursor proteins, the backbone protein T6 and ancillary protein FctX, and anchored to the cell wall in a manner that requires both a housekeeping sortase enzyme (SrtA) and pilus-associated sortase enzyme (SrtB). SrtB is primarily required for efficient formation of the T6 and FctX complex and subsequent polymerization of T6, whereas proper anchoring of the pili to the cell wall is mainly mediated by SrtA. Because motifs essential for polymerization of pilus backbone proteins in other Gram-positive bacteria are not present in T6, we sought to identify the functional residues involved in this process. Our results showed that T6 encompasses the novel VAKS pilin motif conserved in streptococcal T6 homologues and that the lysine residue (Lys-175) within the motif and cell wall sorting signal of T6 are prerequisites for isopeptide linkage of T6 molecules. Because Lys-175 and the cell wall sorting signal of FctX are indispensable for substantial incorporation of FctX into the T6 pilus shaft, FctX is suggested to be located at the pilus tip, which was also implied by immunogold electron microscopy findings. Thus, the elaborate assembly of FCT type 1 pili is potentially organized by sortase-mediated cross-linking between sorting signals and the amino group of Lys-175 positioned in the VAKS motif of T6, thereby displaying T6 and FctX in a temporospatial manner.

Music and Drama in Primary Schools in the Madeira Island--Narratives of Ownership and Leadership

ERIC Educational Resources Information Center

Mota, Graça; Araújo, Maria Jose

2013-01-01

A three-year-case study funded by the Foundation for Science and Technology (FCT) from the Portuguese Ministry of Science, Technology and Higher Education was designed to study a 30-year project of music and drama in primary schools in Madeira. This article reports on the narratives of the three main figures in the project as they elaborate on its…

Material Recovery and Waste Form Development FY 2015 Accomplishments Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Terry Allen; Braase, Lori Ann

The Material Recovery and Waste Form Development (MRWFD) Campaign under the U.S. Department of Energy (DOE) Fuel Cycle Technologies (FCT) Program is responsible for developing advanced separation and waste form technologies to support the various fuel cycle options defined in the DOE Nuclear Energy Research and Development Roadmap, Report to Congress, April 2010. The FY 2015 Accomplishments Report provides a highlight of the results of the research and development (R&D) efforts performed within the MRWFD Campaign in FY-14. Each section contains a high-level overview of the activities, results, technical point of contact, applicable references, and documents produced during the fiscalmore » year. This report briefly outlines campaign management and integration activities, but primarily focuses on the many technical accomplishments made during FY-15. The campaign continued to utilize an engineering driven-science-based approach to maintain relevance and focus. There was increased emphasis on development of technologies that support near-term applications that are relevant to the current once-through fuel cycle.« less

New film-coated tablet formulation of deferasirox is well tolerated in patients with thalassemia or lower-risk MDS: Results of the randomized, phase II ECLIPSE study.

PubMed

Taher, Ali T; Origa, Raffaella; Perrotta, Silverio; Kourakli, Alexandra; Ruffo, Giovan Battista; Kattamis, Antonis; Goh, Ai-Sim; Cortoos, Annelore; Huang, Vicky; Weill, Marine; Merino Herranz, Raquel; Porter, John B

2017-05-01

Once-daily deferasirox dispersible tablets (DT) have a well-defined safety and efficacy profile and, compared with parenteral deferoxamine, provide greater patient adherence, satisfaction, and quality of life. However, barriers still exist to optimal adherence, including gastrointestinal tolerability and palatability, leading to development of a new film-coated tablet (FCT) formulation that can be swallowed with a light meal, without the need to disperse into a suspension prior to consumption. The randomized, open-label, phase II ECLIPSE study evaluated the safety of deferasirox DT and FCT formulations over 24 weeks in chelation-naïve or pre-treated patients aged ≥10 years, with transfusion-dependent thalassemia or IPSS-R very-low-, low-, or intermediate-risk myelodysplastic syndromes. One hundred seventy-three patients were randomized 1:1 to DT (n = 86) or FCT (n = 87). Adverse events (overall), consistent with the known deferasirox safety profile, were reported in similar proportions of patients for each formulation (DT 89.5%; FCT 89.7%), with a lower frequency of severe events observed in patients receiving FCT (19.5% vs. 25.6% DT). Laboratory parameters (serum creatinine, creatinine clearance, alanine aminotransferase, aspartate aminotransferase and urine protein/creatinine ratio) generally remained stable throughout the study. Patient-reported outcomes showed greater adherence and satisfaction, better palatability and fewer concerns with FCT than DT. Treatment compliance by pill count was higher with FCT (92.9%) than with DT (85.3%). This analysis suggests deferasirox FCT offers an improved formulation with enhanced patient satisfaction, which may improve adherence, thereby reducing frequency and severity of iron overload-related complications. © 2017 Wiley Periodicals, Inc.

The small regulatory RNA FasX enhances group A Streptococcus virulence and inhibits pilus expression via serotype-specific targets

PubMed Central

Danger, Jessica L.; Cao, Tram N.; Cao, Tran H.; Sarkar, Poulomee; Treviño, Jeanette; Pflughoeft, Kathryn J.; Sumby, Paul

2015-01-01

Summary Bacterial pathogens commonly show intra-species variation in virulence factor expression and often this correlates with pathogenic potential. The group A Streptococcus (GAS) produces a small regulatory RNA (sRNA), FasX, which regulates the expression of pili and the thrombolytic agent streptokinase. As GAS serotypes are polymorphic regarding (a) FasX abundance, (b) the fibronectin, collagen, T-antigen (FCT) region of the genome, which contains the pilus genes (nine different FCT-types), and (c) the streptokinase-encoding gene (ska) sequence (two different alleles), we sought to test whether FasX regulates pilus and streptokinase expression in a serotype-specific manner. Parental, fasX mutant, and complemented derivatives of serotype M1 (ska-2, FCT-2), M2 (ska-1, FCT-6), M6 (ska-2, FCT-1), and M28 (ska-1, FCT-4) isolates were compared. While FasX reduced pilus expression in each serotype, the molecular basis differed, as FasX bound, and inhibited the translation of, different FCT-region mRNAs. FasX enhanced streptokinase expression in each serotype, although the degree of regulation varied. Finally, we established that the regulation afforded by FasX enhances GAS virulence, assessed by a model of bacteremia using human plasminogen-expressing mice. Our data are the first to identify and characterize serotype-specific regulation by an sRNA in GAS, and to show an sRNA directly contributes to GAS virulence. PMID:25586884

On the predictability of high water level along the US East Coast: can the Florida Current measurement be an indicator for flooding caused by remote forcing?

NASA Astrophysics Data System (ADS)

Ezer, Tal; Atkinson, Larry P.

2017-06-01

Recent studies show that in addition to wind and air pressure effects, a significant portion of the variability of coastal sea level (CSL) along the US East Coast can be attributed to non-local factors such as variations in the Gulf Stream and the North Atlantic circulation; these variations can cause unpredictable coastal flooding. The Florida Current transport (FCT) measurement across the Florida Straits monitors those variations, and thus, the study evaluated the potential of using the FCT as an indicator for anomalously high water level along the coast. Hourly water level data from 12 tide gauge stations over 12 years are used to construct records of maximum daily water levels (MDWL) that are compared with the daily FCT data. An empirical mode decomposition (EMD) approach is used to divide the data into high-frequency modes (periods T < ˜30 days), middle-frequency modes (˜30 days < T < ˜90 days), and low-frequency modes (˜90 days < T < ˜1 year). Two predictive measures are tested: FCT and FCT change (FCC). FCT is anti-correlated with MDWL in high-frequency modes but positively correlated with MDWL in low-frequency modes. FCC on the other hand is always anti-correlated with MDWL for all frequency bands, and the high water signal lags behind FCC for almost all stations, thus providing a potential predictive skill (i.e., whenever a weakening trend is detected in the FCT, anomalously high water is expected along the coast over the next few days). The MDWL-FCT correlation in the high-frequency modes is maximum in the lower Mid-Atlantic Bight, suggesting influence from the meandering Gulf Stream after it separates from the coast. However, the correlation in low-frequency modes is maximum in the South Atlantic Bight, suggesting impact from variations in the wind pattern over subtropical regions. The middle-frequency and low-frequency modes of the FCT seem to provide the best predictor for medium to large flooding events; it is estimated that ˜10-25% of the sea level variability in those modes can be attributed to variations in the FCT. An example from Hurricane Joaquin (September-October, 2015) demonstrates how an offshore storm that never made landfall can cause a weakening of the FCT and unexpected high water level and flooding along the US East Coast. A regression-prediction model based on the MDWL-FCT correlation shows some skill in estimating high water levels during past storms; the water level prediction is more accurate for slow-moving and offshore storms than it is for fast-moving storms. The study can help to improve water level prediction since current storm surge models rely on local wind but may ignore remote forcing.

Camera calibration for multidirectional flame chemiluminescence tomography

NASA Astrophysics Data System (ADS)

Wang, Jia; Zhang, Weiguang; Zhang, Yuhong; Yu, Xun

2017-04-01

Flame chemiluminescence tomography (FCT), which combines computerized tomography theory and multidirectional chemiluminescence emission measurements, can realize instantaneous three-dimensional (3-D) diagnostics for flames with high spatial and temporal resolutions. One critical step of FCT is to record the projections by multiple cameras from different view angles. For high accuracy reconstructions, it requires that extrinsic parameters (the positions and orientations) and intrinsic parameters (especially the image distances) of cameras be accurately calibrated first. Taking the focus effect of the camera into account, a modified camera calibration method was presented for FCT, and a 3-D calibration pattern was designed to solve the parameters. The precision of the method was evaluated by reprojections of feature points to cameras with the calibration results. The maximum root mean square error of the feature points' position is 1.42 pixels and 0.0064 mm for the image distance. An FCT system with 12 cameras was calibrated by the proposed method and the 3-D CH* intensity of a propane flame was measured. The results showed that the FCT system provides reasonable reconstruction accuracy using the camera's calibration results.

Extreme precipitation and floods in the Iberian Peninsula and its socio-economic impacts

NASA Astrophysics Data System (ADS)

Ramos, A. M.; Pereira, S.; Trigo, R. M.; Zêzere, J. L.

2017-12-01

Extreme precipitation events in the Iberian Peninsula can induce floods and landslides that have often major socio-economic impacts. The DISASTER database gathered the basic information on past floods and landslides that caused social consequences in Portugal for the period 1865-2015. This database was built under the assumption that social consequences of floods and landslides are sufficient relevant to be reported by newspapers, that provide the data source. Three extreme historical events were analysed in detail taking into account their associated wide socio-economic impacts. The December 1876 record precipitation and flood event leading to an all-time record flow in two large international rivers (Tagus and Guadiana). As a direct consequence, several Portuguese and Spanish towns and villages located in the banks of both rivers suffered serious flood damage on 7 December 1876. The 20-28 December 1909 event recorded the highest number of flood and landslide cases that occurred in Portugal in the period 1865-2015, having triggered the highest floods in 200 years at the Douro river's mouth and causing 89 fatalities in both Portugal and Spain northern regions. More recently the deadliest flash-flooding event affecting Portugal since, at least, the early 19th century, took place on the 25 and 26 November 1967 causing more than 500 fatalities in the Lisbon region. We provide a detailed analysis of each of these events, including their human impacts, precipitation analyses based on historical datasets and the associated atmospheric circulation conditions from reanalysis datasets. Acknowledgements: This work was supported by the project FORLAND - Hydrogeomorphologic risk in Portugal: driving forces and application for land use planning [PTDC / ATPGEO / 1660/2014] funded by the Portuguese Foundation for Science and Technology (FCT), Portugal. A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012). The financial support for attending this workshop was also possible through FCT project UID/GEO/50019/2013 - Instituto Dom Luiz.

Assessing Mand Topography Preference When Developing a Functional Communication Training Intervention.

PubMed

Kunnavatana, S Shanun; Wolfe, Katie; Aguilar, Alexandra N

2018-05-01

Functional communication training (FCT) is a common function-based behavioral intervention used to decrease problem behavior by teaching an alternative communication response. Therapists often arbitrarily select the topography of the alternative response, which may influence long-term effectiveness of the intervention. Assessing individual mand topography preference may increase treatment effectiveness and promote self-determination in the development of interventions. This study sought to reduce arbitrary selection of FCT mand topography by determining preference during response training and acquisition for two adults with autism who had no functional communication skills. Both participants demonstrated a clear preference for one mand topography during choice probes, and the preferred topography was then reinforced during FCT to reduce problem behavior and increase independent communication. The implications of the results for future research on mand selection during FCT are discussed.

On the effectiveness of and preference for punishment and extinction components of function-based interventions.

PubMed

Hanley, Gregory P; Piazza, Cathleen C; Fisher, Wayne W; Maglieri, Kristen A

2005-01-01

The current study describes an assessment sequence that may be used to identify individualized, effective, and preferred interventions for severe problem behavior in lieu of relying on a restricted set of treatment options that are assumed to be in the best interest of consumers. The relative effectiveness of functional communication training (FCT) with and without a punishment component was evaluated with 2 children for whom functional analyses demonstrated behavioral maintenance via social positive reinforcement. The results showed that FCT plus punishment was more effective than FCT in reducing problem behavior. Subsequently, participants' relative preference for each treatment was evaluated in a concurrent-chains arrangement, and both participants demonstrated a dear preference for FCT with punishment. These findings suggest that the treatment-selection process may be guided by person-centered and evidence-based values.

Structure of tetragonal martensite in the In95.42Cd4.58 cast alloy

NASA Astrophysics Data System (ADS)

Khlebnikova, Yu. V.; Egorova, L. Yu.; Rodionov, D. P.; Kazantsev, V. A.

2017-11-01

The structure of martensite in the In95.42Cd4.58 alloy has been studied by metallography, X-ray diffraction, dilatometry, and transmission electron microscopy. It has been shown that a massive structure built of colonies of tetragonal lamellar plates divided by a twin boundary {101}FCT is formed in the alloy under cooling below the martensite FCC → FCT transition temperature. The alloy recrystallizes after a cycle of FCT → FCC → FCT transitions with a decrease in the grain size by several times compared with the initial structure such fashion that the size of massifs and individual martensite lamella in the massif correlates with the change in the size of the alloy grain. Using thermal cycling, it has been revealed that the alloy tends to stabilize the high-temperature phase.

Involvement of T6 pili in biofilm formation by serotype M6 Streptococcus pyogenes.

PubMed

Kimura, Keiji Richard; Nakata, Masanobu; Sumitomo, Tomoko; Kreikemeyer, Bernd; Podbielski, Andreas; Terao, Yutaka; Kawabata, Shigetada

2012-02-01

The group A streptococcus (GAS) Streptococcus pyogenes is known to cause self-limiting purulent infections in humans. The role of GAS pili in host cell adhesion and biofilm formation is likely fundamental in early colonization. Pilus genes are found in the FCT (fibronectin-binding protein, collagen-binding protein, and trypsin-resistant antigen) genomic region, which has been classified into nine subtypes based on the diversity of gene content and nucleotide sequence. Several epidemiological studies have indicated that FCT type 1 strains, including serotype M6, produce large amounts of monospecies biofilm in vitro. We examined the direct involvement of pili in biofilm formation by serotype M6 clinical isolates. In the majority of tested strains, deletion of the tee6 gene encoding pilus shaft protein T6 compromised the ability to form biofilm on an abiotic surface. Deletion of the fctX and srtB genes, which encode pilus ancillary protein and class C pilus-associated sortase, respectively, also decreased biofilm formation by a representative strain. Unexpectedly, these mutant strains showed increased bacterial aggregation compared with that of the wild-type strain. When the entire FCT type 1 pilus region was ectopically expressed in serotype M1 strain SF370, biofilm formation was promoted and autoaggregation was inhibited. These findings indicate that assembled FCT type 1 pili contribute to biofilm formation and also function as attenuators of bacterial aggregation. Taken together, our results show the potential role of FCT type 1 pili in the pathogenesis of GAS infections.

Effects of iPod Touch™ Technology as Communication Devices on Peer Social Interactions across Environments

ERIC Educational Resources Information Center

Mancil, G. Richmond; Lorah, Elizabeth R.; Whitby, Peggy Schaefer

2016-01-01

The purpose of the study was to evaluate the use of the iPod Touch™ as a Speech Generated Device (SGD) for Functional Communication Training (FCT). The evaluation of the effects on problem behavior, the effects on generalization and maintenance of the acquired communication repertoire, and the social initiations of peers between the new SGD (iPod…

Summary of FY 17 Assessments Sandia National Laboratories: Evaluation of FY16 SNL FCT M2 Milestone Deliverables

DOE Office of Scientific and Technical Information (OSTI.GOV)

Appel, Gordon John

This report is the milestone deliverable M4FT-17SN111102091 “Summary of Assessments Performed FY17 by SNL QA POC” for work package FT-17SN11110209 titled “Quality Assurance – SNL”. This report summarizes the FY17 assessment performed on Fuel Cycle Technologies / Spent Fuel and Waste Disposition efforts.

Adherence to iron chelation therapy in patients who switched from deferasirox dispersible tablets to deferasirox film-coated tablets.

PubMed

Cheng, Wendy Y; Said, Qayyim; Hao, Yanni; Xiao, Yongling; Vekeman, Francis; Bobbili, Priyanka; Duh, Mei Sheng; Nandal, Savita; Blinder, Morey

2018-06-04

To compare real-world adherence to and persistence with deferasirox film-coated tablets (DFX-FCT) and deferasirox dispersible tablets (DFX-DT) among patients who switched from DFX-DT to DFX-FCT, overall and by disease type (sickle cell disease [SCD], thalassemia, and myelodysplastic syndrome [MDS]). Patients were ≥2 years old and had ≥2 DFX-FCT claims over the study period and ≥2 DFX-DT claims before the index date (first DFX-FCT claim). The DFX-DT period was defined from the first DFX-DT claim to the index date; the DFX-FCT period was defined from the index date to the end of the study period. Adherence was measured as medication possession ratio (MPR) and proportion of days covered (PDC). Persistence was defined as continuous medication use without a gap ≥30 or 60 days between refills. Comparisons were conducted using paired-sample Wilcoxon sign-rank and McNemar's tests. In total, 606 patients were selected (SCD: 348; thalassemia: 107; MDS: 106; other: 45). Adherence and persistence in the DFX-FCT vs DFX-DT period was significantly higher across all measures: mean MPR was 0.80 vs 0.76 (p < .001); 60.9% vs 54.3% of patients had MPR ≥ 0.8 (p = .009); mean 3-month PDC was 0.83 vs 0.71 (p < .001); 64.2% vs 45.4% of patients had 3-month PDC ≥ 0.8 (p < .001); 87.2% vs 63.4% of patients had 3-month persistence with no gap ≥30 days and 96.1% vs 79.9% with no gap ≥60 days (p < .001). Adherence and persistence improved after switching across all diseases, particularly MDS. Adherence and persistence improved significantly after switching from DFX-DT to DFX-FCT for all diseases, but especially MDS.

Block copolymer directed one-pot simple synthesis of L10-phase FePt nanoparticles inside ordered mesoporous aluminosilicate/carbon composites.

PubMed

Kang, Eunae; Jung, Hyunok; Park, Je-Geun; Kwon, Seungchul; Shim, Jongmin; Sai, Hiroaki; Wiesner, Ulich; Kim, Jin Kon; Lee, Jinwoo

2011-02-22

A "one-pot" synthetic method was developed to produce L1(0)-phase FePt nanoparticles in ordered mesostructured aluminosilicate/carbon composites using polyisoprene-block-poly(ethylene oxide) (PI-b-PEO) as a structure-directing agent. PI-b-PEO block copolymers with aluminosilicate sols are self-assembled with a hydrophobic iron precursor (dimethylaminomethyl-ferrocene) and a hydrophobic platinum precursor (dimethyl(1,5-cyclooctadiene)platinum(II)) to obtain mesostructured composites. The as-synthesized material was heat-treated to 800 °C under an Ar/H(2) mixture (5% v/v), resulting in the formation of fct FePt nanocrystals encapsulated in ordered mesopores. By changing the quantities of the Fe and Pt precursors in the composite materials, the average particle size of the resulting fct FePt, estimated using the Debye-Scherer equation with X-ray diffraction patterns, can be easily controlled to be 2.6-10.4 nm. Using this simple synthetic method, we can extend the size of directly synthesized fct FePt up to ∼10 nm, which cannot be achieved directly in the colloidal synthetic method. All fct FePt nanoparticles show hysteresis behavior at room temperature, which indicates that ferromagnetic particles are obtained inside mesostructued channels. Well-isolated, ∼10 nm fct FePt have a coercivity of 1100 Oe at 300 K. This coercivity value is higher than values of fct FePt nanoparticles synthesized through the tedious hard template method by employing SBA-15 as a host material. The coercivity value for FePt-1 (2.6 nm) at 5 K is as high as 11 900 Oe, which is one of the largest values reported for FePt nanoparticles, or any other magnetic nanoparticles. The fct FePt nanoparticles also showed exchange-bias behavior.

Involvement of T6 Pili in Biofilm Formation by Serotype M6 Streptococcus pyogenes

PubMed Central

Kimura, Keiji Richard; Nakata, Masanobu; Sumitomo, Tomoko; Kreikemeyer, Bernd; Podbielski, Andreas; Terao, Yutaka

2012-01-01

The group A streptococcus (GAS) Streptococcus pyogenes is known to cause self-limiting purulent infections in humans. The role of GAS pili in host cell adhesion and biofilm formation is likely fundamental in early colonization. Pilus genes are found in the FCT (fibronectin-binding protein, collagen-binding protein, and trypsin-resistant antigen) genomic region, which has been classified into nine subtypes based on the diversity of gene content and nucleotide sequence. Several epidemiological studies have indicated that FCT type 1 strains, including serotype M6, produce large amounts of monospecies biofilm in vitro. We examined the direct involvement of pili in biofilm formation by serotype M6 clinical isolates. In the majority of tested strains, deletion of the tee6 gene encoding pilus shaft protein T6 compromised the ability to form biofilm on an abiotic surface. Deletion of the fctX and srtB genes, which encode pilus ancillary protein and class C pilus-associated sortase, respectively, also decreased biofilm formation by a representative strain. Unexpectedly, these mutant strains showed increased bacterial aggregation compared with that of the wild-type strain. When the entire FCT type 1 pilus region was ectopically expressed in serotype M1 strain SF370, biofilm formation was promoted and autoaggregation was inhibited. These findings indicate that assembled FCT type 1 pili contribute to biofilm formation and also function as attenuators of bacterial aggregation. Taken together, our results show the potential role of FCT type 1 pili in the pathogenesis of GAS infections. PMID:22155780

Transitioning Patients With Iron Overload From Exjade to Jadenu.

PubMed

Tinsley, Sara M; Hoehner-Cooper, Christine M

Iron overload is a concern for patients who require chronic transfusions as a result of inherited or acquired anemias, including sickle cell disease, thalassemia, and myelodysplastic syndromes. Iron chelation therapy (ICT) is the primary treatment for iron overload in these patients. The ICT deferasirox, which has been available as an oral dispersible tablet for liquid suspension, is now also available as a once-daily, film-coated tablet (FCT). Deferasirox FCT allows greater convenience and may be associated with fewer gastrointestinal side effects versus the original formulation. Dose adjustment increments, determined by titration monitoring, are lower for the FCT because of greater bioavailability.

Nutraceutic effect of free condensed tannins of Lysiloma acapulcensis (Kunth) benth on parasite infection and performance of Pelibuey sheep.

PubMed

García-Hernández, Cesar; Arece-García, Javier; Rojo-Rubio, Rolando; Mendoza-Martínez, German David; Albarrán-Portillo, Benito; Vázquez-Armijo, José Fernando; Avendaño-Reyes, Leonel; Olmedo-Juárez, Agustín; Marie-Magdeleine, Carine; López-Leyva, Yoel

2017-01-01

Forty-five Pelibuey sheep were experimentally infested with nematodes to evaluate the effect of three free condensed tannin (FCT) levels of Lysiloma acapulcensis on fecal egg counts (FECs), packed cell volumes (PCV), ocular mucosa colors (OMC), average daily gain (ADG), and adult nematode count. Five treatments were used: 12.5, 25.0, and 37.5 mg of FCT kg -1 of body weight (BW); sterile water (control); and ivermectine (0.22 mg kg -1 of BW) as chemical group. The data were processed through repeated measurement analysis. Even though the three FCT doses decreased (P < 0.05) the FEC, the highest reduction was obtained with 37.5 mg kg -1 of BW. No differences were observed in PCV and OMC. Higher ADG (P < 0.05) was observed with 37.5 mg kg -1 of BW of FCT. The count of adult nematodes (females and males) in the higher dose of FCT was similar to chemical treatment. Dose of 37.5 mg kg -1 of BW decreased the parasite infection and improved the lamb performance. Therefore, this dose could be used as a nutraceutic product in sheep production.

Potential External (non-DOE) Constraints on U.S. Fuel Cycle Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steven J. Piet

2012-07-01

The DOE Fuel Cycle Technologies (FCT) Program will be conducting a screening of fuel cycle options in FY2013 to help focus fuel cycle R&D activities. As part of this screening, performance criteria and go/no-go criteria are being identified. To help ensure that these criteria are consistent with current policy, an effort was initiated to identify the status and basis of potentially relevant regulations, laws, and policies that have been established external to DOE. As such regulations, laws, and policies may be beyond DOE’s control to change, they may constrain the screening criteria and internally-developed policy. This report contains a historicalmore » survey and analysis of publically available domestic documents that could pertain to external constraints on advanced nuclear fuel cycles. “External” is defined as public documents outside DOE. This effort did not include survey and analysis of constraints established internal to DOE.« less

Effects of concentrate proportion in the diet with or without Fusarium toxin-contaminated triticale on ruminal fermentation and the structural diversity of rumen microbial communities in vitro.

PubMed

Boguhn, Jeannette; Neumann, Dominik; Helm, André; Strobel, Egbert; Tebbe, Christoph C; Dänicke, Sven; Rodehutscorda, Markus

2010-12-01

The objective of this study was to investigate the effects of the concentrate proportion and Fusarium toxin-contaminated triticale (FCT) in the diet on nutrient degradation, microbial protein synthesis and structure of the microbial community, utilising a rumen simulation technique and single-strand conformation polymorphism (SSCP) profiles based on PCR-amplified small subunit ribosomal RNA genes. Four diets containing 60% or 30% concentrates on a dry matter basis with or without FCT were incubated. The fermentation of nutrients and microbial protein synthesis was measured. On the last day of incubation, microbial mass was obtained from the vessel liquid, DNA was extracted and PCR-primers targeting archaea, fibrobacter, clostridia, bifidobacteria, bacillii, fungi, and bacteria were applied to separately study the individual taxonomic groups with SSCP. The concentrate proportion affected the fermentation and the microbial community, but not the efficiency of microbial protein synthesis. Neither the fermentation of organic matter nor the synthesis and composition of microbial protein was affected by FCT. The fermentation of detergent fibre fractions was lower in diets containing FCT compared to diets with uncontaminated triticale. Except for the clostridia group, none of the microbial groups were affected by presence of FCT. In conclusion, our results give no indication that the supplementation of FCT up to a deoxynivalenol concentration in the diet of 5 mg per kg dry matter affects the fermentation of organic matter and microbial protein synthesis. These findings are independent of the concentrate level in the diets. A change in the microbial community composition of the genus Clostridia may be the reason for a reduction in the cellulolytic activity.

Atmospheric Rivers in Europe: impacts, predictability, and future climate scenarios

NASA Astrophysics Data System (ADS)

Ramos, A. M.; Tome, R.; Sousa, P. M.; Liberato, M. L. R.; Lavers, D.; Trigo, R. M.

2017-12-01

In recent years a strong relationship has been found between Atmospheric Rivers (ARs) and extreme precipitation and floods across western Europe, with some regions having 8 of their top 10 annual maxima precipitation events related to ARs. In the particular case of the Iberian Peninsula, the association between ARs and extreme precipitation days in the western river basins is noteworthy, while for the eastern and southern basins the impact of ARs is reduced. An automated ARs detection algorithm is used for the North Atlantic Ocean Basin, allowing the identification of major ARs affecting western European coasts in the present climate and under different climate change scenarios. We have used both reanalyzes and six General Circulation models under three climate scenarios (the control simulation, the RCP4.5 and RCP8.5 scenarios). The western coast of Europe was divided into five domains, namely the Iberian Peninsula, France, UK, Southern Scandinavia and the Netherlands, and Northern Scandinavia. It was found that there is an increase in the vertically integrated horizontal water transport which led to an increase in the AR frequency, a result more visible in the high emission scenarios (RCP8.5) for the 2074-2099 period. Since ARs are associated with high impact weather, it is important to study their predictability. This assessment was performed with the ECMWF ensemble forecasts up to 10 days for winters 2013/14, 2014/15 and 2015/16 for events that made landfall in the Iberian Peninsula. We show the model's potential added value to detect upcoming ARs events, which is particularly useful to predict potential hydrometeorological extremes. AcknowledgementsThis work was supported by the project FORLAND - Hydrogeomorphologic risk in Portugal: driving forces and application for land use planning [PTDC / ATPGEO / 1660/2014] funded by the Portuguese Foundation for Science and Technology (FCT), Portugal. A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012). The financial support for attending this workshop was also possible through FCT project UID/GEO/50019/2013 - Instituto Dom Luiz.

Functional Communication Training: A Contemporary Behavior Analytic Intervention for Problem Behaviors.

ERIC Educational Resources Information Center

Durand, V. Mark; Merges, Eileen

2001-01-01

This article describes functional communication training (FCT) with students who have autism. FCT involves teaching alternative communication strategies to replace problem behaviors. The article reviews the conditions under which this intervention is successful and compares the method with other behavioral approaches. It concludes that functional…

Utility of Extinction-Induced Response Variability for the Selection of Mands

ERIC Educational Resources Information Center

Grow, Laura L.; Kelley, Michael E.; Roane, Henry S.; Shillingsburg, M. Alice

2008-01-01

Functional communication training (FCT; Carr & Durand, 1985) is a commonly used differential reinforcement procedure for replacing problem behavior with socially acceptable alternative responses. Most studies in the FCT literature consist of demonstrations of the maintenance of responding when various treatment components (e.g., extinction,…

Functional Communication Training in the Classroom: A Guide for Success

ERIC Educational Resources Information Center

Mancil, G. Richmond; Boman, Marty

2010-01-01

Researchers have consistently shown the effectiveness of functional communication training (FCT) to address both the communication and behavioral needs of children on the autism spectrum. The three steps of FCT include completing a functional behavior assessment, identifying a communication response, and developing a treatment plan. In addition,…

On the numerical calculation of hydrodynamic shock waves in atmospheres by an FCT method

NASA Astrophysics Data System (ADS)

Schmitz, F.; Fleck, B.

1993-11-01

The numerical calculation of vertically propagating hydrodynamic shock waves in a plane atmosphere by the ETBFCT-version of the Flux Corrected Transport (FCT) method by Boris and Book is discussed. The results are compared with results obtained by a characteristic method with shock fitting. We show that the use of the internal energy density as a dependent variable instead of the total energy density can give very inaccurate results. Consequent discretization rules for the gravitational source terms are derived. The improvement of the results by an additional iteration step is discussed. It appears that the FCT method is an excellent method for the accurate calculation of shock waves in an atmosphere.

CoPt/TiN films nanopatterned by RF plasma etching towards dot-patterned magnetic media

NASA Astrophysics Data System (ADS)

Szívós, János; Pothorszky, Szilárd; Soltys, Jan; Serényi, Miklós; An, Hongyu; Gao, Tenghua; Deák, András; Shi, Ji; Sáfrán, György

2018-03-01

CoPt thin films as possible candidates for Bit Patterned magnetic Media (BPM) were prepared and investigated by electron microscopy techniques and magnetic measurements. The structure and morphology of the Direct Current (DC) sputtered films with N incorporation were revealed in both as-prepared and annealed state. Nanopatterning of the samples was carried out by means of Radio Frequency (RF) plasma etching through a Langmuir-Blodgett film of silica nanospheres that is a fast and high throughput technique. As a result, the samples with hexagonally arranged 100 nm size separated dots of fct-phase CoPt were obtained. The influence of the order of nanopatterning and anneling on the nanostructure formation was revealed. The magnetic properties of the nanopatterned fct CoPt films were investigated by Vibrating Sample Magnetometer (VSM) and Magnetic Force Microscopy (MFM). The results show that CoPt thin film nanopatterned by means of the RF plasma etching technique is promising candidate to a possible realization of BPM. Furthermore, this technique is versatile and suitable for scaling up to technological and industrial applications.

A Preliminary Investigation on Improving Functional Communication Training by Mitigating Resurgence of Destructive Behavior

ERIC Educational Resources Information Center

Fuhrman, Ashley M.; Fisher, Wayne W.; Greer, Brian D.

2016-01-01

Despite the effectiveness and widespread use of functional communication training (FCT), resurgence of destructive behavior can occur if the functional communication response (FCR) contacts a challenge, such as lapses in treatment integrity. We evaluated a method to mitigate resurgence by conducting FCT using a multiple schedule of reinforcement…

An Evaluation of Resurgence during Functional Communication Training

ERIC Educational Resources Information Center

Wacker, David P.; Harding, Jay W.; Morgan, Theresa A.; Berg, Wendy K.; Schieltz, Kelly M.; Lee, John F.; Padilla, Yaniz C.

2013-01-01

Three children who displayed destructive behavior maintained by negative reinforcement received functional communication training (FCT). During FCT, the children were required to complete a demand and then to mand (touch a card attached to a microswitch, sign, or vocalize) to receive brief play breaks. Prior to and 1 to 3 times following the…

Electron Microscopic Study of the Structure of Tetragonal Martensite in In-4.5% Cd Alloy

NASA Astrophysics Data System (ADS)

Khlebnikova, Yu. V.; Egorova, L. Yu.; Rodionov, D. P.

2018-04-01

In this work, the formation of a packet structure composed of colonies of lamellar plates separated by twin boundary {101}fct in In-4.5 wt % Cd alloy upon cooling below the fcc → fct martensitic transition temperature has been shown using the methods of metallography, X-ray diffraction, transmission electron microscopy, and EBSD analysis. Two neighboring lamellae differ from each other by the direction of their tetragonality axes. Using EBSD analysis, it has been established that neighboring packets always contain three types of tetragonal martensite lamellae, which are in twin positions and differ from each other by the direction of their tetragonality axes. In turn, each martensite lamella consists of a set of smaller lamellae, which are in twin positions. After the cycle of fct → fcc → fct transitions, the alloy recrystallizes with a decrease in the grain size by several times compared with the initial structure such that the size of packets and the length and width of martensitic lamellae in a packet correlate with a change in the size of an alloy grain.

Aroma types of flue-cured tobacco in China: spatial distribution and association with climatic factors

NASA Astrophysics Data System (ADS)

Yang, Chao; Wu, Wei; Wu, Shu-Cheng; Liu, Hong-Bin; Peng, Qing

2014-02-01

Aroma types of flue-cured tobacco (FCT) are classified into light, medium, and heavy in China. However, the spatial distribution of FCT aroma types and the relationships among aroma types, chemical parameters, and climatic variables were still unknown at national scale. In the current study, multi-year averaged chemical parameters (total sugars, reducing sugars, nicotine, total nitrogen, chloride, and K2O) of FCT samples with grade of C3F and climatic variables (mean, minimum and maximum temperatures, rainfall, relative humidity, and sunshine hours) during the growth periods were collected from main planting areas across China. Significant relationships were found between chemical parameters and climatic variables ( p < 0.05). A spatial distribution map of FCT aroma types were produced using support vector machine algorithms and chemical parameters. Significant differences in chemical parameters and climatic variables were observed among the three aroma types based on one-way analysis of variance ( p < 0.05). Areas with light aroma type had significantly lower values of mean, maximum, and minimum temperatures than regions with medium and heavy aroma types ( p < 0.05). Areas with heavy aroma type had significantly lower values of rainfall and relative humidity and higher values of sunshine hours than regions with light and medium aroma types ( p < 0.05). The output produced by classification and regression trees showed that sunshine hours, rainfall, and maximum temperature were the most important factors affecting FCT aroma types at national scale.

Determination of chloramphenicol residues in commercial chicken eggs in the Federal Capital Territory, Abuja, Nigeria.

PubMed

Mbodi, Felix E; Nguku, P; Okolocha, E; Kabir, J

2014-01-01

The use of antibiotics in poultry can result in residues in eggs. The joint FAO/WHO committee recommended banning the use of chloramphenicol (CAP) in food animals due to its public health hazards of aplastic anaemia, leukaemia, allergy, antibacterial resistance and carcinogenicity. This paper determines the prevalence of CAP residues in chicken eggs and assesses the usage and awareness of its ban amongst poultry farmers in the Federal Capital Territory (FCT), Abuja, Nigeria. A cross-sectional survey of registered poultry farmers in FCT was conducted using questionnaires to determine CAP administration in poultry and awareness of its ban. Pooled egg samples were collected from each poultry farm surveyed and from randomly sampled government-owned markets in FCT. Source of eggs by state were identified by the marketer at the time of collection. Samples were analysed using an enzyme-linked immunosorbent assay (ELISA) technique for the presence of CAP, and prevalence was determined. Of 288 total pooled samples collected, 257 (89.2%) were from the markets and 31 (10.8%) were from poultry farms. A total of 20 (7%) pooled egg samples tested CAP-positive; market eggs originated from 15 (41%) states of the country. Of the market eggs, 16 (6.2%) pooled samples tested positive. Of eggs from poultry farms, four (12.9%) tested positive. Mean CAP concentrations in the positive samples ranged from 0.49 to 1.17 µg kg(-1) (parts per billion). CAP use amongst poultry farmers in FCT was 75.5%; awareness of the CAP ban was 26.3%. Though 66% of veterinarians were unaware of a CAP ban, they were more likely to be aware than other poultry farmers (odds ratio (OR) = 1.4). Farm managers who use CAP were more likely to be aware of CAP ban than the farm managers not using CAP (OR = 5.5; p = 0.04). Establishing a drug residue surveillance and control program and enforcement of CAP legislation/regulation is needful to educate and prohibit the widespread CAP use amongst Nigerian poultry farmers.

Single-Case Analysis to Determine Reasons for Failure of Behavioral Treatment via Telehealth

ERIC Educational Resources Information Center

Schieltz, Kelly M.; Romani, Patrick W.; Wacker, David P.; Suess, Alyssa N.; Huang, Pei; Berg, Wendy K.; Lindgren, Scott D.; Kopelman, Todd G.

2018-01-01

Functional communication training (FCT) is a widely used and effective function-based treatment for problem behavior. The purpose of this article is to present two cases in which FCT was unsuccessful in reducing the occurrence of problem behavior displayed by two young children with an autism spectrum disorder. Both children received the same…

Using the Euclid RTP11.13 Repository in the SEC Environment

DTIC Science & Technology

2006-03-01

of wrong user, passwd combination. We found out that the user and password are hard coded in the FCT software. It uses defaultEditor@ rtp I I 13.INETI...The FCT will start, but when connecting to the Repository it fails because of wrong user, passwd combination: It uses defaultEditor@rtpl I 13.INETI

Exceptional winter storms affecting Western Iberia and extremes: diagnosis, modelling and multi-model ensemble projection

NASA Astrophysics Data System (ADS)

Liberato, M. L. R.; Pinto, J. G.; Gil, V.; Ramos, A. M.; Trigo, R. M.

2017-12-01

Extratropical cyclones dominate autumn and winter weather over Western Europe and particularly over the Iberian Peninsula. Intense, high-impact storms are one of the major weather risks in the region, mostly due to the simultaneous occurrence of high winds and extreme precipitation events. These intense extratropical cyclones may result in windstorm damage, flooding and coastal storm surges, with large societal impacts. In Portugal, due to the extensive human use of coastal areas, the natural and built coastal environments have been amongst the most affected. In this work several historical winter storms that adversely affected the Western Iberian Peninsula are studied in detail in order to contribute to an improved assessment of the characteristics of these events. The diagnosis has been performed based on instrumental daily precipitation and wind records, on satellite images, on reanalysis data and through model simulations. For several examples the synoptic evolution and upper-level dynamics analysis of physical processes controlling the life cycle of extratropical storms associated with the triggering of the considered extreme events has also been accomplished. Furthermore, the space-time variability of the exceptionally severe storms affecting Western Iberia over the last century and under three climate scenarios (the historical simulation, the RCP4.5 and RCP8.5 scenarios) is presented. These studies contribute to improving the knowledge of atmospheric dynamics controlling the life cycle of midlatitude storms associated to severe weather (precipitation and wind) in the Iberian Peninsula. AcknowledgementsThis work is supported by the Portuguese Foundation for Science and Technology (FCT), Portugal, through project UID/GEO/50019/2013 - Instituto Dom Luiz. A. M. Ramos is also supported by a FCT postdoctoral grant (FCT/DFRH/SFRH/BPD/84328/2012).

Importance of adhesins in the recurrence of pharyngeal infections caused by Streptococcus pyogenes.

PubMed

Wozniak, Aniela; Scioscia, Natalia; Geoffroy, Enrique; Ponce, Iván; García, Patricia

2017-04-01

Pharyngo-amygdalitis is the most common infection caused by Streptococcus pyogenes (S. pyogenes). Reinfection with strains of different M types commonly occurs. However, a second infection with a strain of the same M type can still occur and is referred to as recurrence. We aimed to assess whether recurrence of S. pyogenes could be associated to erythromycin resistance, biofilm formation or surface adhesins like fibronectin-binding proteins and pilus proteins, both located in the fibronectin-binding, collagen-binding, T-antigen (FCT) region. We analyed clinical isolates of S. pyogenes obtained from children with multiple positive cultures of throat swabs. We analysed potential associations between M types, clonal patterns, biofilm production and FCT types with their capacity of producing a recurrent infection. We genetically defined recurrence as an infection with the same M type (same strain) and reinfection as an infection with a different M type. No differences were observed between recurrent and reinfection isolates in relation to erythromycin resistance, presence and number of domains of prtF1 gene, and biofilm formation capacity; the only significant difference was the higher frequency of FCT-4 type among recurrent isolates. However, when all the factors that could contribute to recurrence (erythromycin resistance, biofilm production, presence of prtF1 gene and FCT-4 type) were analysed together, we observed that recurrent isolates have a higher number of factors than reinfection isolates. Recurrence seems not to be associated with biofilm formation. However, pili and fibronectin-binding proteins could be associated with recurrence because FCT-4 isolates which harbour two fibronectin-binding proteins are more frequent among recurrent isolates.

Evaluating the Treatment Fidelity of Parents Who Conduct In-Home Functional Communication Training with Coaching via Telehealth

ERIC Educational Resources Information Center

Suess, Alyssa N.; Romani, Patrick W.; Wacker, David P.; Dyson, Shannon M.; Kuhle, Jennifer L.; Lee, John F.; Lindgren, Scott D.; Kopelman, Todd G.; Pelzel, Kelly E.; Waldron, Debra B.

2014-01-01

We conducted a retrospective, descriptive evaluation of the fidelity with which parents of three children with autism spectrum disorders conducted functional communication training (FCT) in their homes. All training was provided to the parents via telehealth by a behavior consultant in a tertiary-level hospital setting. FCT trials coached by the…

Foreign Comparative Testing (FCT) Program Procedures Manual

DTIC Science & Technology

1994-01-01

Public Law 101-189, "National Defense Authorization Act for Fiscal Years 1990 and 1991," November 29, 1989 (e) Federal Acquisition Regulation (FAR...reference (b)) shall be met for any subsequent acquisition (assuming the T&E is successful ). f. Factors, if any, that would mandate subsequent production of...States on an urgent basis. The Commander, U.S. Army Chemical Defense Research Institute, Fort Pinkerton, AL, acting in his capacity as the User

Comparison of mineral weathering and biomass nutrient uptake in two small forested watersheds underlain by quartzite bedrock, Catoctin Mountain, Maryland, USA

USGS Publications Warehouse

Rice, Karen; Price, Jason R.

2014-01-01

To quantify chemical weathering and biological uptake, mass-balance calculations were performed on two small forested watersheds located in the Blue Ridge Physiographic Province in north-central Maryland, USA. Both watersheds, Bear Branch (BB) and Fishing Creek Tributary (FCT), are underlain by relatively unreactive quartzite bedrock. Such unreactive bedrock and associated low chemical-weathering rates offer the opportunity to quantify biological processes operating within the watershed. Hydrologic and stream-water chemistry data were collected from the two watersheds for the 9-year period from June 1, 1990 to May 31, 1999. Of the two watersheds, FCT exhibited both higher chemical-weathering rates and biomass nutrient uptake rates, suggesting that forest biomass aggradation was limited by the rate of chemical weathering of the bedrock. Although the chemical-weathering rate in the FCT watershed was low relative to the global average, it masked the influence of biomass base-cation uptake on stream-water chemistry. Any differences in bedrock mineralogy between the two watersheds did not exert a significant influence on the overall weathering stoichiometry. The difference in chemical-weathering rates between the two watersheds is best explained by a larger proportion of reactive phyllitic layers within the bedrock of the FCT watershed. Although the stream gradient of BB is about two-times greater than that of FCT, its influence on chemical weathering appears to be negligible. The findings of this study support the biomass nutrient uptake stoichiometry of K1.0Mg1.1Ca0.97 previously determined for the study site. Investigations of the chemical weathering of relatively unreactive quartzite bedrock may provide insight into critical zone processes.

Effects of development on indigenous dietary pattern: A Nigerian case study.

PubMed

Ezeomah, Bookie; Farag, Karim

2016-12-01

The traditional foods of indigenous people in Nigeria are known for their cultural symbolism and agricultural biodiversity which contributes to their daily healthy and rich diet. In the early 90s, rapid development of the Federal Capital Territory (FCT) was noted and the resettlement of indigenes to other parts of the region was reported. These changes have facilitated the modification of indigenous diets, as indigenous groups rapidly embraced modern foods and also adopted the food culture of migrant ethnic groups. This has led to a gradual erosion of indigenous diets and traditional food systems in the FCT. This study explored the impact of development on traditional food systems and determined indigenes perception of the modification to their food culture as a result of the development of their land within the FCT. Field survey was carried out in four indigenous communities in the FCT (30 indigenes from each of the four areas) using structured questionnaires, Focus Group Discussions (FGDs) and key informant interviews. Person Chi Square analysis of indigenes socio-economic characteristics revealed significant relationships between gender of indigenes and farm size, Age and farm size, Educational level and farm/herd size. Qualitative analysis of FGDs revealed indigenes opinion on the socio-cultural changes in behaviour and food systems as a result of development. The study also identified indigenous youths as being most influenced by development especially through education, white collar jobs and social interactions with migrant ethnic groups in the FCT. The study recommended that indigenes should be provided with more secure land tenure and "back-to-farm" initiatives should be put in place by the Nigerian government to encourage indigenous youth to engaged more in agriculture. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated testing system FiTest for diagnosis of PCBA

NASA Astrophysics Data System (ADS)

Bogdan, Arkadiusz; Lesniak, Adam

2016-12-01

This article presents the innovative integrated testing system FiTest for automatic, quick inspection of printed circuit board assemblies (PCBA) manufactured in Surface Mount Technology (SMT). Integration of Automatic Optical Inspection (AOI), In-Circuit Tests (ICT) and Functional Circuit Tests (FCT) resulted in universal hardware platform for testing variety of electronic circuits. The platform provides increased test coverage, decreased level of false calls and optimization of test duration. The platform is equipped with powerful algorithms performing tests in a stable and repetitive way and providing effective management of diagnosis.

Evaluation of interventions to reduce multiply controlled vocal stereotypy.

PubMed

Scalzo, Rachel; Henry, Kelsey; Davis, Tonya N; Amos, Kally; Zoch, Tamara; Turchan, Sarah; Wagner, Tara

2015-07-01

This study examined four interventions targeted at decreasing multiply controlled vocal stereotypy for a 12-year-old boy diagnosed with autism spectrum disorder and a severe intellectual disability. These interventions included Noncontingent Music, Differential Reinforcement of Other Behaviors, Self-Recording, and Functional Communication Training (FCT). In addition to measuring vocal stereotypy during each condition, task engagement and challenging behavior were also monitored. Across conditions, vocal stereotypy did not vary significantly from baseline except in FCT, when it decreased significantly. Task engagement was higher in this condition as well. It is hypothesized that FCT provided an enriched environment by increasing social interaction and access to desired items as well as removal of less preferred activities. For these reasons, there was a decrease in the need for the participant to engage in vocal stereotypy and challenging behavior and increase in his ability to engage in a task. © The Author(s) 2015.

Core/shell face-centered tetragonal FePd/Pd nanoparticles as an efficient non-Pt catalyst for the oxygen reduction reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhu, Huiyuan; Jiang, Guangming; Zhang, Xu

We report the synthesis of core/shell face-centered tetragonal (fct)-FePd/Pd nanoparticles (NPs) via reductive annealing of core/shell Pd/Fe 3O 4 NPs followed by temperature-controlled Fe etching in acetic acid. Among three different kinds of core/shell FePd/Pd NPs studied (FePd core at similar to 8 nm and Pd shell at 0.27, 0.65, or 0.81 nm), the fct-FePd/Pd-0.65 NPs are the most efficient catalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO 4 with Pt-like activity and durability. This enhanced ORR catalysis arises from the desired Pd lattice compression in the 0.65 nm Pd shell induced by the fct-FePd core. Lastly,more » our study offers a general approach to enhance Pd catalysis in acid for ORB.« less

Core/shell face-centered tetragonal FePd/Pd nanoparticles as an efficient non-Pt catalyst for the oxygen reduction reaction

DOE PAGES

Zhu, Huiyuan; Jiang, Guangming; Zhang, Xu; ...

2015-10-04

We report the synthesis of core/shell face-centered tetragonal (fct)-FePd/Pd nanoparticles (NPs) via reductive annealing of core/shell Pd/Fe 3O 4 NPs followed by temperature-controlled Fe etching in acetic acid. Among three different kinds of core/shell FePd/Pd NPs studied (FePd core at similar to 8 nm and Pd shell at 0.27, 0.65, or 0.81 nm), the fct-FePd/Pd-0.65 NPs are the most efficient catalyst for the oxygen reduction reaction (ORR) in 0.1 M HClO 4 with Pt-like activity and durability. This enhanced ORR catalysis arises from the desired Pd lattice compression in the 0.65 nm Pd shell induced by the fct-FePd core. Lastly,more » our study offers a general approach to enhance Pd catalysis in acid for ORB.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Carmack; L. Braase; F. Goldner

The mission of the Advanced Fuels Campaign (AFC) is to perform Research, Development, and Demonstration (RD&D) activities for advanced fuel forms (including cladding) to enhance the performance and safety of the nation’s current and future reactors, enhance proliferation resistance of nuclear fuel, effectively utilize nuclear energy resources, and address the longer-term waste management challenges. This includes development of a state of the art Research and Development (R&D) infrastructure to support the use of a “goal oriented science based approach.” AFC uses a “goal oriented, science based approach” aimed at a fundamental understanding of fuel and cladding fabrication methods and performancemore » under irradiation, enabling the pursuit of multiple fuel forms for future fuel cycle options. This approach includes fundamental experiments, theory, and advanced modeling and simulation. One of the most challenging aspects of AFC is the management, integration, and coordination of major R&D activities across multiple organizations. AFC interfaces and collaborates with Fuel Cycle Technologies (FCT) campaigns, universities, industry, various DOE programs and laboratories, federal agencies (e.g., Nuclear Regulatory Commission [NRC]), and international organizations. Key challenges are the development of fuel technologies to enable major increases in fuel performance (safety, reliability, power and burnup) beyond current technologies, and development of characterization methods and predictive fuel performance models to enable more efficient development and licensing of advanced fuels. Challenged with the research and development of fuels for two different reactor technology platforms, AFC targeted transmutation fuel development and focused ceramic fuel development for Advanced LWR Fuels.« less

Longer rewarming time in finger cooling test in association with HbA1c level in diabetics.

PubMed

Zeng, Shan; Chen, Qi; Wang, Xiang-Wen; Hong, Kui; Li, Ju-Xiang; Li, Ping; Cheng, Xiao-Shu; Su, Hai

2016-09-01

To assess if rewarming time in finger cooling test (FCT) as an indicator of microvascular dysfunction is abnormal in patients with type 2 diabetes mellitus (T2DM). Forty-three T2DM patients and 48 healthy controls with similarly distributed baseline demographic, clinical and laboratory parameters were subjected to FCT involving 60-second index finger immersion into water at 4°C. Finger temperature was measured before FCT (baseline-T), immediately after cooling stimulus (T0), and at one-minute intervals until baseline-T recovery. Temperature decline amplitude was calculated as the difference between T0 and baseline-T, and rewarming time as time elapsed from T0 to baseline-T recovery. T2DM patients compared with healthy controls had statistically similar baseline-T, significantly larger temperature decline amplitude, significantly lower T0, and significantly longer rewarming time. In T2DM patients, rewarming time positively correlated with T2DM duration (r=0.513, p<0.001) and glycated hemoglobin (HbA1c) level (r=0.446, p=0.003), which also were its independent predictors in multivariate regression analysis. Patients with T2DM display abnormal FCT results suggestive of microvascular dysfunction, with T2DM duration and HbA1c level independently predicting rewarming time. Copyright © 2016. Published by Elsevier Inc.

Magnetic resonance measurement of muscle T2, fat-corrected T2 and fat fraction in the assessment of idiopathic inflammatory myopathies

PubMed Central

Yao, Lawrence; Yip, Adrienne L.; Shrader, Joseph A.; Mesdaghinia, Sepehr; Volochayev, Rita; Jansen, Anna V.; Miller, Frederick W.

2016-01-01

Objective. This study examines the utility of MRI, including T2 maps and T2 maps corrected for muscle fat content, in evaluating patients with idiopathic inflammatory myopathy. Methods. A total of 44 patients with idiopathic inflammatory myopathy, 18 of whom were evaluated after treatment with rituximab, underwent MRI of the thighs and detailed clinical assessment. T2, fat fraction (FF) and fat corrected T2 (fc-T2) maps were generated from standardized MRI scans, and compared with semi-quantitative scoring of short tau inversion recovery (STIR) and T1-weighted sequences, as well as various myositis disease metrics, including the Physician Global Activity, the modified Childhood Myositis Assessment Scale and the muscle domain of the Myositis Disease Activity Assessment Tool-muscle (MDAAT-muscle). Results. Mean T2 and mean fc-T2 correlated similarly with STIR scores (Spearman rs = 0.64 and 0.64, P < 0.01), while mean FF correlated with T1 damage scores (rs = 0.69, P < 0.001). Baseline T2, fc-T2 and STIR scores correlated significantly with the Physician Global Activity, modified Childhood Myositis Assessment Scale and MDAAT-muscle (rs range = 0.41–0.74, P < 0.01). The response of MRI measures to rituximab was variable, and did not significantly agree with a standardized clinical definition of improvement. Standardized response means for the MRI measures were similar. Conclusion. Muscle T2, fc-T2 and FF measurements exhibit content validity with reference to semi-quantitative scoring of STIR and T1 MRI, and also exhibit construct validity with reference to several myositis activity and damage measures. T2 was as responsive as fc-T2 and STIR scoring, although progression of muscle damage was negligible during the study. PMID:26412808

Multimetallic nanoparticle catalysts with enhanced electrooxidation

DOEpatents

Sun, Shouheng; Zhang, Sen; Zhu, Huiyuan; Guo, Shaojun

2015-07-28

A new structure-control strategy to optimize nanoparticle catalysis is provided. The presence of Au in FePtAu facilitates FePt structure transformation from chemically disordered face centered cubic (fcc) structure to chemically ordered face centered tetragonal (fct) structure, and further promotes formic acid oxidation reaction (FAOR). The fct-FePtAu nanoparticles show high CO poisoning resistance, achieve mass activity as high as about 2810 mA/mg Pt, and retain greater than 90% activity after a 13 hour stability test.

A Comparative Study of Three Different Chemical Vapor Deposition Techniques of Carbon Nanotube Growth on Diamond Films

DTIC Science & Technology

2012-11-01

microwave plasma-enhanced CVD (MPE-CVD) with presputtered metal catalyst, and floating catalyst thermal CVD (FCT-CVD) with xylene and ferrocene liquid...processes with nickel and iron catalysts, respectively. For the FCT-CVD approach, ferrocene is used as an iron source to promoteCNT growth. Based on...furnace is ramped up to the growth temperature of 750∘C. Ferrocene was dissolved into a xylene solvent in a 0.008 : 1molar volume ratio.The xylene

Identification of pregnancy-associated glycoproteins and alpha-fetoprotein in fallow deer (Dama dama) placenta

PubMed Central

2014-01-01

Background This paper describes the isolation and characterization of pregnancy-associated glycoproteins (PAG) from fetal cotyledonary tissue (FCT) and maternal caruncular tissue (MCT) collected from fallow deer (Dama dama) pregnant females. Proteins issued from FCT and MCT were submitted to affinity chromatographies by using Vicia villosa agarose (VVA) or anti-bovine PAG-2 (R#438) coupled to Sepharose 4B gel. Finally, they were characterized by SDS-PAGE and N-terminal microsequencing. Results Four distinct fallow deer PAG (fdPAG) sequences were identified and submitted to Swiss-Prot database. Comparison of fdPAG with PAG sequences identified in other ruminant species exhibited 64 to 83% identity. Additionally, alpha-fetoprotein was identified in fetal and maternal tissues. Conclusion Our results demonstrate the efficacy of VVA and bovine PAG-2 affinity chromatographies for the isolation of PAG molecules expressed in deer placenta. This is the first report giving four specific amino acid sequences of PAG isolated from feto-maternal junction (FCT and MCT) in the Cervidae family. PMID:24410890

The ancillary protein 1 of Streptococcus pyogenes FCT-1 pili mediates cell adhesion and biofilm formation through heterophilic as well as homophilic interactions

PubMed Central

Becherelli, Marco; Manetti, Andrea G O; Buccato, Scilla; Viciani, Elisa; Ciucchi, Laura; Mollica, Giulia; Grandi, Guido; Margarit, Imma

2012-01-01

Summary Gram-positive pili are known to play a role in bacterial adhesion to epithelial cells and in the formation of biofilm microbial communities. In the present study we undertook the functional characterization of the pilus ancillary protein 1 (AP1_M6) from Streptococcus pyogenes isolates expressing the FCT-1 pilus variant, known to be strong biofilm formers. Cell binding and biofilm formation assays using S. pyogenes in-frame deletion mutants, Lactococcus expressing heterologous FCT-1 pili and purified recombinant AP1_M6, indicated that this pilin is a strong cell adhesin that is also involved in bacterial biofilm formation. Moreover, we show that AP1_M6 establishes homophilic interactions that mediate inter-bacterial contact, possibly promoting bacterial colonization of target epithelial cells in the form of three-dimensional microcolonies. Finally, AP1_M6 knockout mutants were less virulent in mice, indicating that this protein is also implicated in GAS systemic infection. PMID:22320452

A Comparative Test of Metallicity Calibrations for M dwarfs

NASA Astrophysics Data System (ADS)

Neves, Vasco; Bonfils, X.; Santos, N. C.

2011-09-01

The determination of the stellar parameters of M dwarfs is of prime importance in the fields of galactic, stellar and planetary astronomy. M stars are the least studied galactic component regarding their fundamental parameters. Yet, they are the most numerous stars in the galaxy and contribute to more than half of its total (baryonic) mass. In particular, we are interested in their metallicity in order to study the star-planet connection and to refine the planetary parameters. Here we present a comparative test of five metallicity calibrations of M dwarfs proposed in the literature. Our test sample is made of 22 M dwarfs, companion of widely separated (> 5 arcsec) F-, G- or K- dwarfs with known or newly measured metallicity. We included M dwarfs with reliable V photometry only by restricting our sample to stars with V uncertainty lower than ˜0.02 dex. Among all calibrations, we find that Schlaufman & Laughlin (2010) provides a lower offset and residuals against our sample and, ultimately, we used that larger sample to update and marginally improve their calibration. Despite better V photometry than used in previous studies the dispersion remains largely in excess given [Fe/H] and photometric uncertainties, suggesting it has physical roots. Finally, we also present preliminary work on a new, high-precision spectroscopic calibration involving the direct measurement of high-resolution spectra of M dwarfs. This work is supported by the European Research Council/European Community under the FP7 through Starting Grant agreement number 239953. NCS also acknowledges the support from Fundacão para a Ciência e a Tecnologia (FCT) through program Ciência 2007 funded by FCT/MCTES (Portugal) and POPH/FSE (EC), and in the form of grant reference PTDC/CTE-AST/098528/2008. VN would also like to acknowledge the support from FCT in the form of the fellowship SFRH/BD/60688/2009.

Radiogenic Ingrowth of 40CA from Decay of 40K Provides a Powerful Tracer for Understanding the Origins of Felsic Magmas

NASA Technical Reports Server (NTRS)

Mills, Ryan D.; Simon, Justin I.; Depaolo, Donald J.; Bachmann, Olivier

2013-01-01

Over time high K/Ca continental crust produces a unique Ca isotopic reservoir, with measurable 40Ca excesses compared to Earth's mantle (?Ca=0). Thus, values of ?Cai > 1 indicate a significant crustal contribution to a magma. Values of ?Cai (<1) indistinguishable from mantle Ca indicate that the Ca in those magmas is either directly from the mantle, or is from partial melting of newly formed crust. So, whereas 40Ca excesses clearly define crustal contributions, mantle-like 40Ca/44Ca ratios are not as definitive. Here we present Ca isotopic measurements of intermediate to felsic igneous rocks from the western United States, and two crustal xenoliths found within the Fish Canyon Tuff (FCT). The two crustal xenoliths found within the 28.2 Ma FCT of the southern Rocky Mountain volcanic field (SRMVF) yield ?Ca values of 4 and 7.5, respectively. The 40Ca excesses of these possible source rocks are due to long-term in situ 40K decay and suggest that they are Precambrian in age. However, the FCT (?Cai 0.3) is within uncertainty of the mantle 40Ca/44Ca. Together, these data indicate that little Precambrian crust was involved in the petrogenesis of the FCT. Nd isotopic analyses of the FCT imply that it was generated from 10- 75% of an enriched component, and the Ca isotopic data appear to restrict that component to newly formed lower crust, or enriched mantle. However, the Ca isotopic data do permit assimilation of some crust with low Ca/Nd; decreasing the 143Nd/144Nd without adding much excess 40Ca to the FCT. Several other large tuffs from the SRMVF and from Yellowstone have ?Cai indistinguishable from the mantle. However, a few large tuffs from the SRMVF show significant 40Ca excesses. These tuffs (Wall Mountain, Blue Mesa, and Grizzly Peak) are likely sourced from near, or within the Colorado Mineral Belt. New isotopic measurements of Mesozoic and Tertiary granites from across the northern Great Basin show a range of ?Cai from 0 to 3. In these samples ?Cai is generally correlated with ?Sri and is broadly negatively correlated with ?Ndi. However, for granites with similar ?Ndi at a given general location ?Cai can vary significantly (1 to 2 epsilon units). In rocks where low ?Ndi could also be due to melting from enriched reservoirs in the mantle lithosphere, the combination of high ?Cai with low ?Ndi clearly identifies crustal melts.

Operation of the Joy Flexible Conveyor Train at the Marissa Mine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hill, J.C.

1994-12-31

We have had both successes and difficulties with the Joy FCT at Marissa mine. The successes are obvious, as are the difficulties, and both will require considerable effort to maintain and cure, respectively. We are committed to seeing the FCT successful at Marissa as we believe that continuous haulage is the new paradigm in underground section haulage, and we intend to be on the leading edge of the change. Also, as a wise man once said, Joy can fix anything, if you have enough money.

Proton NMR studies of the electronic structure of ZrH/sub x/

NASA Technical Reports Server (NTRS)

Attalla, A.; Bowman, R. C., Jr.; Craft, B. D.; Venturini, E. L.; Rhim, W. K.

1982-01-01

The proton spin lattice relaxation times and Knight shifts were measured in f.c.c. (delta-phase) and f.c.t. (epsilon-phase) ZrH/sub x/ for 1.5 or = to x or = to 2.0. Both parameters indicate that N(E/sub F/) is very dependent upon hydrogen content with a maximum occurring at ZrH1 83. This behavior is ascribed to modifications in N(E/sub F/) through a fcc/fct distortion in ZrH/sub x/ associated with a Jahn-Teller effect.

A Comparative Study of Three Different Chemical Vapor Deposition (CVD) Techniques of Carbon Nanotube Growth on Diamond Films

DTIC Science & Technology

2013-01-01

FCT-CVD) with xylene and ferrocene liquid mixture without any prior catalyst deposition. T-CVD is a low cost system that can easily be set up to grow...iron catalysts, respectively. For the FCT-CVD approach, ferrocene is used as an iron source to promote CNT growth. Based on these repeatable results...kept at 250 ° C while the high temperature furnace is ramped up to the growth temperature of 750 ° C. Ferrocene was dissolved into xylene solvent in

Effectiveness and Safety of Oro-Dispersible Sildenafil in a New Film Formulation for the Treatment of Erectile Dysfunction: Comparison Between Sildenafil 100-mg Film-Coated Tablet and 75-mg Oro-Dispersible Film.

PubMed

Cocci, Andrea; Capece, Marco; Cito, Gianmartin; Russo, Giorgio Ivan; Falcone, Marco; Timpano, Massimiliano; Rizzo, Michele; Della Camera, Pier Andrea; Morselli, Simone; Campi, Riccardo; Sessa, Francesco; Cacciamani, Giovanni; Minervini, Andrea; Gacci, Mauro; Mirone, Vincenzo; Morelli, Girolamo; Mondaini, Nicola; Polloni, Gaia; Serni, Sergio; Natali, Alessandro

2017-12-01

A new oro-dispersible film (ODF) formulation of sildenafil has been developed for the treatment of erectile dysfunction (ED) to overcome the drawbacks that some patients experience when taking the conventional film-coated tablet (FCT). To assess the effectiveness and safety of sildenafil ODF formulation in patients with ED who were using the conventional FCT. From May 2017 through July 2017, 139 patients with ED were enrolled. Data from penile color-duplex ultrasound, medical history, hormonal evaluation, and patient self-administered questionnaires were collected. All patients were administered sildenafil 100-mg FCT for 4 weeks. Thereafter, they underwent a 2-week washout period and subsequently took sildenafil 75-mg ODF for 4 weeks. The International Index of Erectile Function (IIEF-15), Hospital Anxiety and Depression Scale (HADS), Patient Global Impressions of Improvement (PGI-I), and Clinician Global Impressions of Improvement (CGI-I) questionnaires were administered and severity of ED was classified as severe (IIEF-15 score ≤ 10), moderate (IIEF-15 score 11-16), or mild (IIEF-15 score = 17-25). All patients completed the final protocol. Differences in mean IIEF scores for erectile function, orgasmic function, sexual desire, and intercourse satisfaction were significantly in favor of sildenafil 100-mg FCT, whereas the mean score for overall satisfaction was in favor of sildenafil 75-mg ODF. A significant difference in changes in HADS score was found from washout to final follow-up (mean difference = -0.19; P < .01). For the ODF formulation, the median CGI-I score was 3.5 (interquartile range [IQR] = 2.5-4.5) and the median PGI-I score was 3.0 (IQR = 2.0-4.0). The median action time was 20.0 minutes (IQR = 15.0-30.0) and the median mouth time was 60.0 seconds (IQR = 30.0-120.0). The ODF formulation of a widely known drug, with the same safety and effectiveness of the FCT, was better appreciated by patients in overall satisfaction. This is the first clinical trial to assess the efficacy of a new formulation of sildenafil in patients with ED. The limitations of the study are related to the methodology used: it was not a case-control study and the patients were not drug-naïve for ED treatment. Therefore, only the "additional" side effects of the ODF formulation compared with FCT are reported. The new ODF formulation is as efficient and safe as the FCT formulation and offers a new choice of treatment to specialists for more precisely tailored therapy. Cocci A, Capece M, Cito G, et al. Effectiveness and Safety of Oro-Dispersible Sildenafil in a New Film Formulation for the Treatment of Erectile Dysfunction: Comparison Between Sildenafil 100-mg Film-Coated Tablet and 75-mg Oro-Dispersible Film. J Sex Med 2017;14:1606-1611. Copyright © 2017 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Knowledge, care-seeking behavior, and factors associated with patient delay among newly-diagnosed pulmonary tuberculosis patients, Federal Capital Territory, Nigeria, 2010.

PubMed

Biya, Oladayo; Gidado, Saheed; Abraham, Ajibola; Waziri, Ndadilnasiya; Nguku, Patrick; Nsubuga, Peter; Suleman, Idris; Oyemakinde, Akin; Nasidi, Abdulsalami; Sabitu, Kabir

2014-01-01

Early treatment of Tuberculosis (TB) cases is important for reducing transmission, morbidity and mortality associated with TB. In 2007, Federal Capital Territory (FCT), Nigeria recorded low TB case detection rate (CDR) of 9% which implied that many TB cases were undetected. We assessed the knowledge, care-seeking behavior, and factors associated with patient delay among pulmonary TB patients in FCT. We enrolled 160 newly-diagnosed pulmonary TB patients in six directly observed treatment short course (DOTS) hospitals in FCT in a cross-sectional study. We used a structured questionnaire to collect data on socio-demographic variables, knowledge of TB, and care-seeking behavior. Patient delay was defined as > 4 weeks between onset of cough and first hospital contact. Mean age was 32.8 years (± 9 years). Sixty two percent were males. Forty seven percent first sought care in a government hospital, 26% with a patent medicine vendor and 22% in a private hospital. Forty one percent had unsatisfactory knowledge of TB. Forty two percent had patient delay. Having unsatisfactory knowledge of TB (p = 0.046) and multiple care-seeking (p = 0.02) were significantly associated with patient delay. After controlling for travel time and age, multiple care-seeking was independently associated with patient delay (Adjusted Odds Ratio = 2.18, 95% CI = 1.09-4.35). Failure to immediately seek care in DOTS centers and having unsatisfactory knowledge of TB are factors contributing to patient delay. Strategies that promote early care-seeking in DOTS centers and sustained awareness on TB should be implemented in FCT.

Fisher's method of combining dependent statistics using generalizations of the gamma distribution with applications to genetic pleiotropic associations.

PubMed

Li, Qizhai; Hu, Jiyuan; Ding, Juan; Zheng, Gang

2014-04-01

A classical approach to combine independent test statistics is Fisher's combination of $p$-values, which follows the $\\chi ^2$ distribution. When the test statistics are dependent, the gamma distribution (GD) is commonly used for the Fisher's combination test (FCT). We propose to use two generalizations of the GD: the generalized and the exponentiated GDs. We study some properties of mis-using the GD for the FCT to combine dependent statistics when one of the two proposed distributions are true. Our results show that both generalizations have better control of type I error rates than the GD, which tends to have inflated type I error rates at more extreme tails. In practice, common model selection criteria (e.g. Akaike information criterion/Bayesian information criterion) can be used to help select a better distribution to use for the FCT. A simple strategy of the two generalizations of the GD in genome-wide association studies is discussed. Applications of the results to genetic pleiotrophic associations are described, where multiple traits are tested for association with a single marker.

Direct Measurement of Recoil Effects on Ar-Ar Standards

NASA Astrophysics Data System (ADS)

Hall, C. M.

2011-12-01

Advances in the precision possible with the Ar-Ar method using new techniques and equipment have led to considerable effort to improve the accuracy of the calibration of interlaboratory standards. However, ultimately the accuracy of the method relies on the measurement of 40Ar*/39ArK ratios on primary standards that have been calibrated with the K-Ar method and, in turn, on secondary standards that are calibrated against primary standards. It is usually assumed that an Ar-Ar total gas age is equivalent to a K-Ar age, but this assumes that there is zero loss of Ar due to recoil. Instead, traditional Ar-Ar total gas ages are in fact Ar retention ages [1] and not, strictly speaking, comparable to K-Ar ages. There have been efforts to estimate the importance of this effect on standards along with prescriptions for minimizing recoil effects [2,3], but these studies have relied on indirect evidence for 39Ar recoil. We report direct measurements of 39Ar recoil for a set of primary and secondary standards using the vacuum encapsulation techniques of [1] and show that significant adjustments to ages assigned to some standards may be needed. The fraction f of 39Ar lost due to recoil for primary standards MMhb-1 hornblende and GA-1550 biotite are 0.00367 and 0.00314 respectively. It is possible to modify the assumed K-Ar ages of these standards so that when using their measured Ar retention 40Ar*/39ArK ratios, one obtains a correct K-Ar age for an unknown, assuming that the unknown sample has zero loss of 39Ar due to recoil. Assuming a primary K-Ar age for MMhb-1 of 520.4 Ma, the modified age would be 522.1 Ma and assuming a primary K-Ar age for GA-1550 of 98.79 Ma [4] yields a modified effective age of 99.09 Ma. Measured f values for secondary standards FCT-3 biotite, FCT-2 sanidine and TCR-2 sanidine are 0.00932, 0.00182 and 0.00039 respectively. Using an R value for FCT-3 biotite relative to MMhb-1 [5], the K-Ar age for this standard would be 27.83 Ma and using R values for FCT and TC sanidines [4] against GA-1550, their K-Ar ages would be 28.06 Ma and 28.41 Ma respectively. For retrospective recalculation purposes, the effective Ar-Ar age of these samples that should yield correct K-Ar ages for unknowns with zero recoil loss would be 28.09 Ma, 28.11 Ma and 28.42 Ma for FCT-3 biotite, FCT-2 sanidine and TCR-2 sanidine respectively. The measured f for FCT-3 appears to explain the R value of it relative to FCT sanidine of 1.0086 found by [8]. From the low T portion of the Ar release spectra of the biotite and amphibole standards, it is clear that the dominant recoil artifact affecting Ar release is the re-implantation mechanism seen in clay samples [1,6,7] and not the loss of 39Ar at the surface of the grain. The geometry of neighboring grains during irradiation and internal defects may predominate in controlling recoil loss. [1] Dong et al., 1995, Science, 267, 355-359. [2] Paine et al., 2006, Geochim.Cosmochim. Acta, 70, 1507-1517. [3] Jourdan et al., 2007, Geochim. Cosmochim. Acta, 71, 2791-2808 [4] Renne et al., 1998, Chem. Geol., 145 117-152. [5] Hall & Farrell, 1995, Earth Planet. Sci. Lett., 133, 327-338. [6] Hall et al., 1997, Earth Planet. Sci. Lett., 148, 287-298. [7] Hall et al., 2000, Econ. Geol., 95, 1739-1752. [8] Di Vincenzo & Roman Skála, 2009, Geochim. Cosmochim. Acta, 73, 493-513.

Operational Solution to the Nonlinear Klein-Gordon Equation

NASA Astrophysics Data System (ADS)

Bengochea, G.; Verde-Star, L.; Ortigueira, M.

2018-05-01

We obtain solutions of the nonlinear Klein-Gordon equation using a novel operational method combined with the Adomian polynomial expansion of nonlinear functions. Our operational method does not use any integral transforms nor integration processes. We illustrate the application of our method by solving several examples and present numerical results that show the accuracy of the truncated series approximations to the solutions. Supported by Grant SEP-CONACYT 220603, the first author was supported by SEP-PRODEP through the project UAM-PTC-630, the third author was supported by Portuguese National Funds through the FCT Foundation for Science and Technology under the project PEst-UID/EEA/00066/2013

Effects of Au content on the structure and magnetic properties of L1{sub 0}-FePt nanoparticles synthesized by the sol–gel method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Yang; Institute of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013; Jiang, Yuhong

2014-07-01

(FePt){sub 100−x}Au{sub x} (x=0, 5, 10, and 20) nanoparticles were synthesized by the sol–gel method, and effects of Au content on the structural and magnetic properties of samples were investigated. Au doping reduced the phase transition temperature from face-centered cubic (FCC) to face-centered tetragonal (FCT) structure. In addition, additive Au promotes the chemical ordering of L1{sub 0} FePt NPs and increases the grain size of L1{sub 0} FePt NPs. When Au content increased from 0 to 10 at%, the coercivity (H{sub c}) increased due to the increase in degree of ordering S and grain size of L1{sub 0} FePt NPs.more » By increasing the Au content to 20 at%, H{sub c} decreased. - Graphical abstract: (FePt){sub 100}Au{sub 0} NPs are the coexistence of FCT and FCC phases. However, no hints of FCC phase were found for the (FePt){sub 100−x}Au{sub x} NPs (x=5, 10 and 20), which indicates that addition of gold greatly promotes the FCC to FCT phase transition. - Highlights: • (FePt){sub 100−x}Au{sub x} (x=0, 5, 10 and 20) nanoparticles (NPs) were synthesized. • Au addition promotes the chemical ordering of L1{sub 0} FePt NPs. • Au addition reduces ordering temperature of L1{sub 0} FePt NPs from FCC to FCT phase. • (FePt){sub 90}Au{sub 10} NPs show a high coercivity of 9585 Oe at room temperature.« less

Extraction of dynamic functional connectivity from brain grey matter and white matter for MCI classification.

PubMed

Chen, Xiaobo; Zhang, Han; Zhang, Lichi; Shen, Celina; Lee, Seong-Whan; Shen, Dinggang

2017-10-01

Brain functional connectivity (FC) extracted from resting-state fMRI (RS-fMRI) has become a popular approach for diagnosing various neurodegenerative diseases, including Alzheimer's disease (AD) and its prodromal stage, mild cognitive impairment (MCI). Current studies mainly construct the FC networks between grey matter (GM) regions of the brain based on temporal co-variations of the blood oxygenation level-dependent (BOLD) signals, which reflects the synchronized neural activities. However, it was rarely investigated whether the FC detected within the white matter (WM) could provide useful information for diagnosis. Motivated by the recently proposed functional correlation tensors (FCT) computed from RS-fMRI and used to characterize the structured pattern of local FC in the WM, we propose in this article a novel MCI classification method based on the information conveyed by both the FC between the GM regions and that within the WM regions. Specifically, in the WM, the tensor-based metrics (e.g., fractional anisotropy [FA], similar to the metric calculated based on diffusion tensor imaging [DTI]) are first calculated based on the FCT and then summarized along each of the major WM fiber tracts connecting each pair of the brain GM regions. This could capture the functional information in the WM, in a similar network structure as the FC network constructed for the GM, based only on the same RS-fMRI data. Moreover, a sliding window approach is further used to partition the voxel-wise BOLD signal into multiple short overlapping segments. Then, both the FC and FCT between each pair of the brain regions can be calculated based on the BOLD signal segments in the GM and WM, respectively. In such a way, our method can generate dynamic FC and dynamic FCT to better capture functional information in both GM and WM and further integrate them together by using our developed feature extraction, selection, and ensemble learning algorithms. The experimental results verify that the dynamic FCT can provide valuable functional information in the WM; by combining it with the dynamic FC in the GM, the diagnosis accuracy for MCI subjects can be significantly improved even using RS-fMRI data alone. Hum Brain Mapp 38:5019-5034, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Titanite petrochronology in the Fish Canyon Tuff

NASA Astrophysics Data System (ADS)

Schmitz, M. D.; Crowley, J. L.

2014-12-01

The petrologic complexity of the archtypical 'monotonous intermediate' Fish Canyon Tuff (FCT) has been previously established by a variety of mineralogical and geochemical proxies [1-2], and the unusual storage and eruptive dynamics of the FCT have been delineated by several geochronological studies [3-5]. Titanite is an apparent equilibrium phase in the penultimate FCT magma, and can be linked petrographically to hornblende crystals that preserve up-temperature core-to-rim zoning profiles. As a reactive, trace element-rich phase, we hypothesized that titanite may record an intracrystalline record of magma chamber dynamics. Titanite crystals from the same separate analyzed in [4] were oriented and doubly-polished to yield characteristic wedge-shaped cross-sectional wafers approximately 300 µm in thickness. BSE imaging guided LA-ICPMS analyses of a full suite of trace elements using a 25 µm beam diameter and crater depth on multiple locations across both sides of the wafer. Most titanite crystals are characterized by large variations in trace elements, including at least two generations of REE-enriched, actinide-poor, low Sr, large Eu anomaly cores overgrown by REE-depleted, actinide-rich, high Sr domains with small Eu anomalies and distinctive concave-up middle to heavy REE patterns. Trace element contents and patterns correlate strongly with Eu anomaly; intermediate compositions are abundant and spatially correlated to reaction zones between core and rim domains. Within the context of the batholithic rejuvenation model for the FCT magma [1-2], these trace element variations are interpreted to record the partial melting of a differentiated crystalline FCT precursor and its hybridization with a more 'mafic' flux. ID-TIMS dating of end-member titanites confirm older ages (ca 28.4 to 29.0 Ma) for cores and define a younger age for rejuvenation of ca 28.2 Ma, consistent with recent U-Pb zircon and 40Ar/39Ar studies [5-7]. [1] Bachmann & Dungan (2002) Am Mineral 87, 1062-1076. [2] Bachmann et al (2002) J Petrology 43, 1469-1503. [3] Bachmann et al (2007) Chem Geol 236, 134-166. [4] Schmitz & Bowring (2001) GCA 65, 2571-2587. [5] Wotzlaw et al (2013) Geology 41, 867-870. [6] Rivera et al. (2011) EPSL 311, 420-426. [7] Kuiper et al (2008) Science 320, 500-504.

High magnetic coercivity of FePt-Ag/MgO granular nanolayers

NASA Astrophysics Data System (ADS)

Roghani, R.; Sebt, S. A.; Khajehnezhad, A.

2018-06-01

L10-FePt ferromagnetic nanoparticles have a hight coercivity of Tesla order. Thus, these nanoparticles, with size of 10 to 15 nm and uniform surface distribution, are suitable in magnetic data storage technology with density of more than 1GB. In order to improve structural and magnetic properties of FePt nanoparticles, some elements and combinations have been added to compound. In this research, we show that due to the presence of the Ag, the phase transition temperature of FePt from fcc to L10-fct phase decreases. The presence of Ag as an additive in FePt-Ag nanocomposite, increases the magnetic coercivity. This nanocomposite, with 10% Ag, was deposited by magnetron sputtering on the MgO heat layer. VSM results of 10 nm nanoparticles show that coercivity has increased up to 1.4 T. XRD and FESEM results confirm that the size of the L10-FePt nanoparticles are 10 nm and their surface distribution are uniform. Ag gradually form nano scale clusters with separate lattice and FePt-Ag nanocomposite appears. The result of this process is emptiness of Ag position in FePt-fcc lattice. So, the mobility of Fe and Pt atoms in this lattice increases and it can be possible for them to move in lower temperature. This mechanism explain the effect of Ag on decreasing the transition temperature to fct-L10 phase, and hight coercivity of FePt nanoparticles.

Raw data of the effects of Chlorogenic acid in 3-Nitropropionic acid induced toxicity and genotoxicity.

PubMed

Norberto, Alarcón-Herrera; Saúl, Flores-Maya; Belén, Bellido; García-Bores Ana, M; Ernesto, Mendoza; Guillermo, Ávila-Acevedo; Elizabeth, Hernández-Echeagaray

2017-10-01

The raw data showed in this article comes from the published research article entitled "Protective effects of Chlorogenic acid in 3-Nitropropionic acid induced toxicity and genotoxicity" Food Chem Toxicol. 2017 May 3. pii: S0278-6915(17)30226-0. DOI:10.1016/j.fct.2017.04.048. [1]. Data illustrates antitoxic and antigenotoxic effects of Chlorogenic acid (CGA) on toxicity and genotoxicity produced by the in vivo treatment with mitochondria toxin 3-Nitropropionic acid (3-NP) in mice. Toxicity and genotoxicity was evaluated in erythrocytes of peripheral blood through the micronuclei assay. Data was share at the Elsevier repository under the reference number FCT9033.

A package for 3-D unstructured grid generation, finite-element flow solution and flow field visualization

NASA Technical Reports Server (NTRS)

Parikh, Paresh; Pirzadeh, Shahyar; Loehner, Rainald

1990-01-01

A set of computer programs for 3-D unstructured grid generation, fluid flow calculations, and flow field visualization was developed. The grid generation program, called VGRID3D, generates grids over complex configurations using the advancing front method. In this method, the point and element generation is accomplished simultaneously, VPLOT3D is an interactive, menudriven pre- and post-processor graphics program for interpolation and display of unstructured grid data. The flow solver, VFLOW3D, is an Euler equation solver based on an explicit, two-step, Taylor-Galerkin algorithm which uses the Flux Corrected Transport (FCT) concept for a wriggle-free solution. Using these programs, increasingly complex 3-D configurations of interest to aerospace community were gridded including a complete Space Transportation System comprised of the space-shuttle orbitor, the solid-rocket boosters, and the external tank. Flow solutions were obtained on various configurations in subsonic, transonic, and supersonic flow regimes.

The influence of Atmospheric Rivers over the South Atlantic on rainfall in South Africa

NASA Astrophysics Data System (ADS)

Ramos, A. M.; Trigo, R. M.; Blamey, R. C.; Tome, R.; Reason, C. J. C.

2017-12-01

An automated atmospheric river (AR) detection algorithm is used for the South Atlantic Ocean basin, allowing the identification of the major ARs impinging on the west coast of South Africa during the austral winter months (April-September) for the period 1979-2014, using two reanalysis products (NCEP-NCAR and ERA-Interim). The two products show relatively good agreement, with 10-15 persistent ARs (lasting 18h or longer) occurring on average per winter and nearly two thirds of these systems occurring poleward of 35°S. The relationship between persistent AR activity and winter rainfall is demonstrated using South African Weather Service rainfall data. Most stations positioned in areas of high topography contained the highest percentage of rainfall contributed by persistent ARs, whereas stations downwind, to the east of the major topographic barriers, had the lowest contributions. Extreme rainfall days in the region are also ranked by their magnitude and spatial extent. It is found that around 70% of the top 50 daily winter rainfall extremes in South Africa were in some way linked to ARs (both persistent and non-persistent). Results suggest that although persistent ARs are important contributors to heavy rainfall events, they are not necessarily a prerequisite. Overall, the findings of this study support akin assessments in the last decade on ARs in the northern hemisphere bound for the western coasts of USA and Europe. AcknowledgementsThe financial support for attending this workshop was possible through FCT project UID/GEO/50019/2013 - Instituto Dom Luiz. The author wishes also to acknowledge the contribution of project IMDROFLOOD - Improving Drought and Flood Early Warning, Forecasting and Mitigation using real-time hydroclimatic indicators (WaterJPI/0004/2014, Funded by Fundação para a Ciência e a Tecnologia, Portugal (FCT)), with the data provided to achieve this work. A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012).

Austenite-martensite transformation in electrodeposited Fe70Pd30 NWs: a step towards making bio-nano-actuators tested on in vivo systems

NASA Astrophysics Data System (ADS)

Zuzek Rozman, K.; Pecko, D.; Trafela, S.; Samardzija, Z.; Spreitzer, M.; Jaglicic, Z.; Nadrah, P.; Zorko, M.; Bele, M.; Tisler, T.; Pintar, A.; Sturm, S.; Kostevsek, N.

2018-03-01

Fe69±3Pd31±3 nanowires (NWs) with lengths of a few microns and diameters of 200 nm were synthesized via template-assisted pulsed electrodeposition into alumina-based templates. The as-deposited Fe69±3Pd31±3 NWs exhibited α-Fe (bcc-solid solution of Fe, Pd) nanocrystalline structure as seen from the x-ray diffraction (XRD), that got confirmed by transmission electron microscopy (TEM) with some larger grains up 50 nm observed. Annealing of the as-deposited Fe69±3Pd31±3 NWs at 1173 K/45 min was followed by quenching in ice water and resulted in a transformation to the fcc crystal structure (XRD) with grain sizes up to 200 nm (TEM). To induce the austenite-to-martensite, i.e., fcc-to-fct phase transformation the fcc Fe69±3Pd31±3 NWs were cooled to 73 K. The XRD showed the disappearance of the (200) fcc reflection (at room temperature) and the appearance of the (200) fct reflection (at 73 K), confirming the fcc-to-fct transformation took place. The magnetic measurements revealed that the fcc Fe69±3Pd31±3 NWs measured at low temperatures (50 K) had a larger coercivity than at room temperature, which suggests the fct phase was present in the undercooled state, exhibiting a larger magnetocrystalline anisotropy than the fcc phase present at room temperature. As part of our interest in magnetic-shape-memory actuators, the as-deposited Fe69±3Pd31±3 NWs were tested for toxicity on zebrafish. In vivo tests showed no acute lethal or sub-lethal effects, which implies that the Fe69±3Pd31±3 NWs have the potential to be used as nano-actuators in biomedical applications.

Memory Device and Nanofabrication Techniques Using Electrically Configurable Materials

NASA Astrophysics Data System (ADS)

Ascenso Simões, Bruno

Development of novel nanofabrication techniques and single-walled carbon nanotubes field configurable transistor (SWCNT-FCT) memory devices using electrically configurable materials is presented. A novel lithographic technique, electric lithography (EL), that uses electric field for pattern generation has been demonstrated. It can be used for patterning of biomolecules on a polymer surface and patterning of resist as well. Using electrical resist composed of a polymer having Boc protected amine group and iodonium salt, Boc group on the surface of polymer was modified to free amine by applying an electric field. On the modified surface of the polymer, Streptavidin pattern was fabricated with a sub-micron scale. Also patterning of polymer resin composed of epoxy monomers and diaryl iodonium salt by EL has been demonstrated. Reaction mechanism for electric resist configuration is believed to be induced by an acid generation via electrochemical reduction in the resist. We show a novel field configurable transistor (FCT) based on single-walled carbon nanotube network field-effect transistors in which poly (ethylene glycol) crosslinked by electron-beam is incorporated into the gate. The device conductance can be configured to arbitrary states reversibly and repeatedly by applying external gate voltages. Raman spectroscopy revealed that evolution of the ratio of D- to G-band intensity in the SWCNTs of the FCT progressively increases as the device is configured to lower conductance states. Electron transport studies at low temperatures showed a strong temperature dependence of the resistance. Band gap widening of CNTs up to ˜ 4 eV has been observed by examining the differential conductance-gate voltage-bias voltage relationship. The switching mechanism of the FCT is attributed a structural transformation of CNTs via reversible hydrogenation and dehydrogenations induced by gate voltages, which tunes the CNT bandgap continuously and reversibly to non-volatile analog values. The CNT transistors with field tunable band gaps would facilitate field programmable circuits based on the self-organized CNTs, and might also lead to novel analog memory, neuromorphic, and photonic devices.

Conflicts of interests, confidentiality and censorship in health risk assessment: the example of an herbicide and a GMO.

PubMed

Séralini, Gilles-Eric; Mesnage, Robin; Defarge, Nicolas; Spiroux de Vendômois, Joël

2014-01-01

We have studied the long-term toxicity of a Roundup-tolerant GM maize (NK603) and a whole Roundup pesticide formulation at environmentally relevant levels from 0.1 ppb. Our study was first published in Food and Chemical Toxicology (FCT) on 19 September, 2012. The first wave of criticisms arrived within a week, mostly from plant biologists without experience in toxicology. We answered all these criticisms. The debate then encompassed scientific arguments and a wave of ad hominem and potentially libellous comments appeared in different journals by authors having serious yet undisclosed conflicts of interests. At the same time, FCT acquired as its new assistant editor for biotechnology a former employee of Monsanto after he sent a letter to FCT to complain about our study. This is in particular why FCT asked for a post-hoc analysis of our raw data. On 19 November, 2013, the editor-in-chief requested the retraction of our study while recognizing that the data were not incorrect and that there was no misconduct and no fraud or intentional misinterpretation in our complete raw data - an unusual or even unprecedented action in scientific publishing. The editor argued that no conclusions could be drawn because we studied 10 rats per group over 2 years, because they were Sprague Dawley rats, and because the data were inconclusive on cancer. Yet this was known at the time of submission of our study. Our study was however never attended to be a carcinogenicity study. We never used the word 'cancer' in our paper. The present opinion is a summary of the debate resulting in this retraction, as it is a historic example of conflicts of interest in the scientific assessments of products commercialized worldwide. We also show that the decision to retract cannot be rationalized on any discernible scientific or ethical grounds. Censorship of research into health risks undermines the value and the credibility of science; thus, we republish our paper.

Reply to Comment on "Zircon U-Th-Pb dating using LA-ICP-MS: Simultaneous U-Pb and U-Th dating on the 0.1 Ma Toya Tephra, Japan"

NASA Astrophysics Data System (ADS)

Ito, Hisatoshi

2015-04-01

Guillong et al. (2015) mentioned that corrections for abundance sensitivity for 232Th and molecular zirconium sesquioxide ions (Zr2O3+) are critical for reliable determination of 230Th abundances in zircon for LA-ICP-MS analyses. There is no denying that more rigorous treatments are necessary to obtain more reliable ages than those in Ito (2014). However, as shown in Fig. 2 in Guillong et al. (2015), the uncorrected (230Th)/(238U) for reference zircons except for Mud Tank are only 5-20% higher than unity. Since U abundance of Toya Tephra zircons that have U-Pb ages < 1 Ma is in-between that of FCT and Plesovice, the overestimation of 230Th by both abundance sensitivity and molecular interferences is expected to be 5-20% for the Toya Tephra. Moreover Ito (2014) obtained U-Th ages of the Toya Tephra by comparison with Fish Canyon Tuff (FCT) data. Because both the FCT and the Toya Tephra have similar trends of overestimation of 230Th, the effect of overestimation of 230Th to cause overestimation of U-Th age should be cancelled out or negligible. Therefore the pivotal conclusion in Ito (2014) that simultaneous U-Pb and U-Th dating using LA-ICP-MS is possible and useful for Quaternary zircons holds true.

Role of "the frame cycle time" in portal dose imaging using an aS500-II EPID.

PubMed

Al Kattar Elbalaa, Zeina; Foulquier, Jean Noel; Orthuon, Alexandre; Elbalaa, Hanna; Touboul, Emmanuel

2009-09-01

This paper evaluates the role of an acquisition parameter, the frame cycle time "FCT", in the performance of an aS500-II EPID. The work presented rests on the study of the Varian EPID aS500-II and the image acquisition system 3 (IAS3). We are interested in integrated acquisition using asynchronous mode. For better understanding the image acquisition operation, we investigated the influence of the "frame cycle time" on the speed of acquisition, the pixel value of the averaged gray-scale frame and the noise, using 6 and 15MV X-ray beams and dose rates of 1-6Gy/min on 2100 C/D Linacs. In the integrated mode not synchronized to beam pulses, only one parameter the frame cycle time "FCT" influences the pixel value. The pixel value of the averaged gray-scale frame is proportional to this parameter. When the FCT <55ms (speed of acquisition V(f/s)>18 frames/s), the speed of acquisition becomes unstable and leads to a fluctuation of the portal dose response. A timing instability and saturation are detected when the dose per frame exceeds 1.53MU/frame. Rules were deduced to avoid saturation and to optimize this dosimetric mode. The choice of the acquisition parameter is essential for the accurate portal dose imaging.

Crystal Structural Effect of AuCu Alloy Nanoparticles on Catalytic CO Oxidation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhan, Wangcheng; Wang, Jinglin; Wang, Haifeng

2017-06-07

Controlling the physical and chemical properties of alloy nanoparticles (NPs) is an important approach to optimize NP catalysis. Unlike other tuning knobs, such as size, shape, and composition, crystal structure has received limited attention and not been well understood for its role in catalysis. This deficiency is mainly due to the difficulty in synthesis and fine-tuning of the NPs’ crystal structure. Here, Exemplifying by AuCu alloy NPs with face centered cubic (fcc) and face centered tetragonal (fct) structure, we demonstrate a remarkable difference in phase segregation and catalytic performance depending on the crystal structure. During the thermal treatment in air,more » the Cu component in fcc-AuCu alloy NPs segregates more easily onto the alloy surface as compared to that in fct-AuCu alloy NPs. As a result, after annealing at 250 °C in air for 1 h, the fcc- and fct-AuCu alloy NPs are phase transferred into Au/CuO and AuCu/CuO core/shell structures, respectively. More importantly, this variation in heterostructures introduces a significant difference in CO adsorption on two catalysts, leading to a largely enhanced catalytic activity of AuCu/CuO NP catalyst for CO oxidation. Furthermore, the same concept can be extended to other alloy NPs, making it possible to fine-tune NP catalysis for many different chemical reactions.« less

New Method to Synthesize Highly Active and Durable Chemically Ordered fct-PtCo Cathode Catalyst for PEMFCs.

PubMed

Jung, Won Suk; Popov, Branko N

2017-07-19

In the bottom-up synthesis strategy performed in this study, the Co-catalyzed pyrolysis of chelate-complex and activated carbon black at high temperatures triggers the graphitization reaction which introduces Co particles in the N-doped graphitic carbon matrix and immobilizes N-modified active sites for the oxygen reduction reaction (ORR) on the carbon surface. In this study, the Co particles encapsulated within the N-doped graphitic carbon shell diffuse up to the Pt surface under the polymer protective layer and forms a chemically ordered face-centered tetragonal (fct) Pt-Co catalyst PtCo/CCCS catalyst as evidenced by structural and compositional studies. The fct-structured PtCo/CCCS at low-Pt loading (0.1 mg Pt cm -2 ) shows 6% higher power density than that of the state-of-the-art commercial Pt/C catalyst. After the MEA durability test of 30 000 potential cycles, the performance loss of the catalyst is negligible. The electrochemical surface area loss is less than 40%, while that of commercial Pt/C is nearly 80%. After the accelerated stress test, the uniform catalyst distribution is retained and the mean particle size increases approximate 1 nm. The results obtained in this study indicated that highly stable compositional and structural properties of chemically ordered PtCo/CCCS catalyst contribute to its exceptional catalyst durability.

International Collaboration Activities on Engineered Barrier Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jove-Colon, Carlos F.

The Used Fuel Disposition Campaign (UFDC) within the DOE Fuel Cycle Technologies (FCT) program has been engaging in international collaborations between repository R&D programs for high-level waste (HLW) disposal to leverage on gathered knowledge and laboratory/field data of near- and far-field processes from experiments at underground research laboratories (URL). Heater test experiments at URLs provide a unique opportunity to mimetically study the thermal effects of heat-generating nuclear waste in subsurface repository environments. Various configurations of these experiments have been carried out at various URLs according to the disposal design concepts of the hosting country repository program. The FEBEX (Full-scale Engineeredmore » Barrier Experiment in Crystalline Host Rock) project is a large-scale heater test experiment originated by the Spanish radioactive waste management agency (Empresa Nacional de Residuos Radiactivos S.A. – ENRESA) at the Grimsel Test Site (GTS) URL in Switzerland. The project was subsequently managed by CIEMAT. FEBEX-DP is a concerted effort of various international partners working on the evaluation of sensor data and characterization of samples obtained during the course of this field test and subsequent dismantling. The main purpose of these field-scale experiments is to evaluate feasibility for creation of an engineered barrier system (EBS) with a horizontal configuration according to the Spanish concept of deep geological disposal of high-level radioactive waste in crystalline rock. Another key aspect of this project is to improve the knowledge of coupled processes such as thermal-hydro-mechanical (THM) and thermal-hydro-chemical (THC) operating in the near-field environment. The focus of these is on model development and validation of predictions through model implementation in computational tools to simulate coupled THM and THC processes.« less

Fe/Rh (100) multilayer magnetism probed by x-ray magnetic circular dichroism

NASA Astrophysics Data System (ADS)

Tomaz, M. A.; Ingram, D. C.; Harp, G. R.; Lederman, D.; Mayo, E.; O'brien, W. L.

1997-09-01

We report the layer-averaged magnetic moments of both Fe and Rh in sputtered Fe/Rh (100) multilayer thin films as measured by x-ray magnetic circular dichroism. We observe two distinct regimes in these films. The first is characterized by Rh moments of at least 1μB, Fe moments enhanced as much as 30% above bulk, and a bct crystal structure. The second regime is distinguished by sharp declines of both Fe and Rh moments accompanied by a transition to an fct crystal lattice. The demarcation between the two regions is identified as the layer thickness for which both bct and fct phases first coexist, which we term the critical thickness tcrit. We attribute the change in magnetic behavior to the structural transformation.

Projection model for flame chemiluminescence tomography based on lens imaging

NASA Astrophysics Data System (ADS)

Wan, Minggang; Zhuang, Jihui

2018-04-01

For flame chemiluminescence tomography (FCT) based on lens imaging, the projection model is essential because it formulates the mathematical relation between the flame projections captured by cameras and the chemiluminescence field, and, through this relation, the field is reconstructed. This work proposed the blurry-spot (BS) model, which takes more universal assumptions and has higher accuracy than the widely applied line-of-sight model. By combining the geometrical camera model and the thin-lens equation, the BS model takes into account perspective effect of the camera lens; by combining ray-tracing technique and Monte Carlo simulation, it also considers inhomogeneous distribution of captured radiance on the image plane. Performance of these two models in FCT was numerically compared, and results showed that using the BS model could lead to better reconstruction quality in wider application ranges.

Extreme Windstorms and Related Impacts on Iberia

NASA Astrophysics Data System (ADS)

Liberato, Margarida L. R.; Ordóñez, Paulina; Pinto, Joaquim G.; Ramos, Alexandre M.; Karremann, Melanie K.; Trigo, Isabel F.

2014-05-01

Extreme windstorms are one of the major natural catastrophes in the mid latitudes, one of the most costly natural hazards in Europe and are responsible for substantial economic damages and even fatalities. During the recent winters, the Iberian Peninsula was hit by severe (wind) storms such as Klaus (January 2009), Xynthia (February 2010) and Gong (January 2013) which exhibited uncommon characteristics. They were all explosive extratropical cyclones formed over the mid-Atlantic, travelling then eastwards at lower latitudes than usual along the edge of the dominant North Atlantic storm track. In this work we present a windstorm catalogue for the Iberian Peninsula, where the characteristics of the potentially more destructive windstorms for the 1979-2012 period are identified. For this purpose, the potential impact of high winds over the Iberian Peninsula is assessed by using a daily damage index based on maximum wind speeds that exceeds the local 98th percentile threshold. Then, the characteristics of extratropical cyclones associated with these events are analyzed. Results indicate that these are fast moving, intense cyclones, typically located near the northwestern tip of the Iberian Peninsula. This work was partially supported by FEDER (Fundo Europeu de Desenvolvimento Regional) funds through the COMPETE (Programa Operacional Factores de Competitividade) and by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project STORMEx FCOMP-01-0124-FEDER- 019524 (PTDC/AAC-CLI/121339/2010). A. M. Ramos was also supported by a FCT postdoctoral Grant (FCT/DFRH/SFRH/BPD/84328/2012).

Vegetation fire proneness in Europe

NASA Astrophysics Data System (ADS)

Pereira, Mário; Aranha, José; Amraoui, Malik

2015-04-01

Fire selectivity has been studied for vegetation classes in terms of fire frequency and fire size in a few European regions. This analysis is often performed along with other landscape variables such as topography, distance to roads and towns. These studies aims to assess the landscape sensitivity to forest fires in peri-urban areas and land cover changes, to define landscape management guidelines and policies based on the relationships between landscape and fires in the Mediterranean region. Therefore, the objectives of this study includes the: (i) analysis of the spatial and temporal variability statistics within Europe; and, (ii) the identification and characterization of the vegetated land cover classes affected by fires; and, (iii) to propose a fire proneness index. The datasets used in the present study comprises: Corine Land Cover (CLC) maps for 2000 and 2006 (CLC2000, CLC2006) and burned area (BA) perimeters, from 2000 to 2013 in Europe, provided by the European Forest Fire Information System (EFFIS). The CLC is a part of the European Commission programme to COoRdinate INformation on the Environment (Corine) and it provides consistent, reliable and comparable information on land cover across Europe. Both the CLC and EFFIS datasets were combined using geostatistics and Geographical Information System (GIS) techniques to access the spatial and temporal evolution of the types of shrubs and forest affected by fires. Obtained results confirms the usefulness and efficiency of the land cover classification scheme and fire proneness index which allows to quantify and to compare the propensity of vegetation classes and countries to fire. As expected, differences between northern and southern Europe are notorious in what concern to land cover distribution, fire incidence and fire proneness of vegetation cover classes. This work was supported by national funds by FCT - Portuguese Foundation for Science and Technology, under the project PEst-OE/AGR/UI4033/2014 and by the project SUSTAINSYS: Environmental Sustainable Agro-Forestry Systems (NORTE-07-0124-FEDER-000044), financed by the North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework (QREN), through the European Regional Development Fund (FEDER), as well as by National Funds (PIDDAC) through the Portuguese Foundation for Science and Technology (FCT/MEC).

Using Multiple Schedules During Functional Communication Training to Promote Rapid Transfer of Treatment Effects

PubMed Central

Fisher, Wayne W.; Greer, Brian D.; Fuhrman, Ashley M.; Querim, Angie C.

2016-01-01

Multiple schedules with signaled periods of reinforcement and extinction have been used to thin reinforcement schedules during functional communication training (FCT) to make the intervention more practical for parents and teachers. We evaluated whether these signals would also facilitate rapid transfer of treatment effects from one setting to the next and from one therapist to the next. With two children, we conducted FCT in the context of mixed (baseline) and multiple (treatment) schedules introduced across settings or therapists using a multiple baseline design. Results indicated that when the multiple schedules were introduced, the functional communication response came under rapid discriminative control, and problem behavior remained at near-zero rates. We extended these findings with another individual by using a more traditional baseline in which problem behavior produced reinforcement. Results replicated those of the previous participants and showed rapid reductions in problem behavior when multiple schedules were implemented across settings. PMID:26384141

Further Evaluation of the Use of Multiple Schedules for Behavior Maintained by Negative Reinforcement.

PubMed

Campos, Claudia; Leon, Yanerys; Sleiman, Andressa; Urcuyo, Beatriz

2017-03-01

One potential limitation of functional communication training (FCT) is that after the functional communication response (FCR) is taught, the response may be emitted at high rates or inappropriate times. Thus, schedule thinning is often necessary. Previous research has demonstrated that multiple schedules can facilitate schedule thinning by establishing discriminative control of the communication response while maintaining low rates of problem behavior. To date, most applied research evaluating the clinical utility of multiple schedules has done so in the context of behavior maintained by positive reinforcement (e.g., attention or tangible items). This study examined the use of a multiple schedule with alternating Fixed Ratio (FR 1)/extinction (EXT) components for two individuals with developmental disabilities who emitted escape-maintained problem behavior. Although problem behavior remained low during all FCT and multiple schedule phases, the use of the multiple schedule alone did not result in discriminated manding.

Structural phase transition of gold under uniaxial, tensile, and triaxial stresses: An ab initio study

NASA Astrophysics Data System (ADS)

Durandurdu, Murat

2007-07-01

The behavior of gold crystal under uniaxial, tensile, and three different triaxial stresses is studied using an ab initio constant pressure technique within a generalized gradient approximation. Gold undergoes a phase transformation from the face-centered-cubic structure (fcc) to a body-centered-tetragonal (bct) structure having the space group of I4/mmm with the application of uniaxial stress, while it transforms to a face-centered-tetragonal (fct) phase within I4/mmm symmetry under uniaxial tensile loading. Further uniaxial compression of the bct phase results in a symmetry change from I4/mmm to P1 at high stresses and ultimately structural failure around 200.0GPa . For the case of triaxial stresses, gold also converts into a bct state. The critical stress for the fcc-to-bct transformation increases as the ratio of the triaxial stress increases. Both fct and bct phases are elastically unstable.

Using multiple schedules during functional communication training to promote rapid transfer of treatment effects.

PubMed

Fisher, Wayne W; Greer, Brian D; Fuhrman, Ashley M; Querim, Angie C

2015-12-01

Multiple schedules with signaled periods of reinforcement and extinction have been used to thin reinforcement schedules during functional communication training (FCT) to make the intervention more practical for parents and teachers. We evaluated whether these signals would also facilitate rapid transfer of treatment effects across settings and therapists. With 2 children, we conducted FCT in the context of mixed (baseline) and multiple (treatment) schedules introduced across settings or therapists using a multiple baseline design. Results indicated that when the multiple schedules were introduced, the functional communication response came under rapid discriminative control, and problem behavior remained at near-zero rates. We extended these findings with another individual by using a more traditional baseline in which problem behavior produced reinforcement. Results replicated those of the previous participants and showed rapid reductions in problem behavior when multiple schedules were implemented across settings. © Society for the Experimental Analysis of Behavior.

Numerical stability analysis of two-dimensional solute transport along a discrete fracture in a porous rock matrix

NASA Astrophysics Data System (ADS)

Watanabe, Norihiro; Kolditz, Olaf

2015-07-01

This work reports numerical stability conditions in two-dimensional solute transport simulations including discrete fractures surrounded by an impermeable rock matrix. We use an advective-dispersive problem described in Tang et al. (1981) and examine the stability of the Crank-Nicolson Galerkin finite element method (CN-GFEM). The stability conditions are analyzed in terms of the spatial discretization length perpendicular to the fracture, the flow velocity, the diffusion coefficient, the matrix porosity, the fracture aperture, and the fracture longitudinal dispersivity. In addition, we verify applicability of the recently developed finite element method-flux corrected transport (FEM-FCT) method by Kuzmin () to suppress oscillations in the hybrid system, with a comparison to the commonly utilized Streamline Upwinding/Petrov-Galerkin (SUPG) method. Major findings of this study are (1) the mesh von Neumann number (Fo) ≥ 0.373 must be satisfied to avoid undershooting in the matrix, (2) in addition to an upper bound, the Courant number also has a lower bound in the fracture in cases of low dispersivity, and (3) the FEM-FCT method can effectively suppress the oscillations in both the fracture and the matrix. The results imply that, in cases of low dispersivity, prerefinement of a numerical mesh is not sufficient to avoid the instability in the hybrid system if a problem involves evolutionary flow fields and dynamic material parameters. Applying the FEM-FCT method to such problems is recommended if negative concentrations cannot be tolerated and computing time is not a strong issue.

Multifractal analysis of information processing in hippocampal neural ensembles during working memory under Δ9-tetrahydrocannabinol administration

PubMed Central

Fetterhoff, Dustin; Opris, Ioan; Simpson, Sean L.; Deadwyler, Sam A.; Hampson, Robert E.; Kraft, Robert A.

2014-01-01

Background Multifractal analysis quantifies the time-scale-invariant properties in data by describing the structure of variability over time. By applying this analysis to hippocampal interspike interval sequences recorded during performance of a working memory task, a measure of long-range temporal correlations and multifractal dynamics can reveal single neuron correlates of information processing. New method Wavelet leaders-based multifractal analysis (WLMA) was applied to hippocampal interspike intervals recorded during a working memory task. WLMA can be used to identify neurons likely to exhibit information processing relevant to operation of brain–computer interfaces and nonlinear neuronal models. Results Neurons involved in memory processing (“Functional Cell Types” or FCTs) showed a greater degree of multifractal firing properties than neurons without task-relevant firing characteristics. In addition, previously unidentified FCTs were revealed because multifractal analysis suggested further functional classification. The cannabinoid-type 1 receptor partial agonist, tetrahydrocannabinol (THC), selectively reduced multifractal dynamics in FCT neurons compared to non-FCT neurons. Comparison with existing methods WLMA is an objective tool for quantifying the memory-correlated complexity represented by FCTs that reveals additional information compared to classification of FCTs using traditional z-scores to identify neuronal correlates of behavioral events. Conclusion z-Score-based FCT classification provides limited information about the dynamical range of neuronal activity characterized by WLMA. Increased complexity, as measured with multifractal analysis, may be a marker of functional involvement in memory processing. The level of multifractal attributes can be used to differentially emphasize neural signals to improve computational models and algorithms underlying brain–computer interfaces. PMID:25086297

Optical Pointing Sensor

NASA Technical Reports Server (NTRS)

Shields, Joel F.; Metz, Brandon C.

2010-01-01

The optical pointing sensor provides a means of directly measuring the relative positions of JPL s Formation Control Testbed (FCT) vehicles without communication. This innovation is a steerable infrared (IR) rangefinder that gives measurements in terms of range and bearing to a passive retroreflector.

Micromorphological changes in cardiac tissue of drug-related deaths with emphasis on chronic illicit opioid abuse

PubMed Central

Seltenhammer, Monika H; Marchart, Katharina; Paula, Pia; Kordina, Nicole; Klupp, Nikolaus; Schneider, Barbara; Fitzl, Christine; Risser, Daniele U

2013-01-01

Aims The main intention of this retrospective study was to investigate whether chronic illicit drug abuse, especially the intravenous use of opioids (heroin), could potentially trigger the development of myocardial fibrosis in drug addicts. Design A retrospective case–control study was performed using myocardial tissue samples from both drug-related deaths (DRD) with verifiable opioid abuse and non-drug-related deaths in the same age group. Setting Department of Forensic Medicine, Medical University of Vienna, Austria (1993–94). Participants Myocardial specimens were retrieved from 76 deceased intravenous opioid users and compared to those of 23 deceased non-drug users. Measurements Drug quantification was carried out using the enzyme-multiplied immunoassay technique (EMIT), followed by [gas chromatography–mass spectrometry (GC–MS), MAT 112®], and analysed using the Integrator 3390A by Hewlett Packard® and LABCOM.1 computer (MSS-G.G.). The amount of fibrous connective tissue (FCT) in the myocardium was determined by using the morphometric software LUCIA Net version 1.16.2©, Laboratory Imaging, with NIS Elements 3.0®. Findings Drug analysis revealed that 67.11% were polydrug users and the same proportion was classified as heroin addicts (6-monoacetylmorphine, 6-MAM)—32.89% were users of pure heroin. In 76.32% of DRD cases, codeine was detected. Only 2.63% consumed cocaine. The mean morphine concentrations were 389.03 ng/g in the cerebellum and 275.52 ng/g in the medulla oblongata, respectively. Morphometric analysis exhibited a strong correlation between DRD and myocardial fibrosis. The mean proportion of FCT content in the drug group was 7.6 ± 2.9% (females: 6.30 ± 2.19%; males: 7.91 ± 3.01%) in contrast to 5.2 ± 1.7% (females: 4.45 ± 1.23%; males: 5.50 ± 1.78%) in the control group, indicating a significant difference (P = 0.0012), and a significant difference in the amount of FCT between females and males (P = 0.0383). There was no significant interaction of age and FCT (P = 0.8472). Conclusions There is a long-term risk of cardiac dysfunction following chronic illicit drug abuse with opioids as a principal component. Regular cardiological examination of patients receiving substitution treatment with morphine is strongly recommended. PMID:23297783

Functional Communication Training

ERIC Educational Resources Information Center

Durand, V. Mark; Moskowitz, Lauren

2015-01-01

Thirty years ago, the first experimental demonstration was published showing that educators could improve significant challenging behavior in children with disabilities by replacing these behaviors with forms of communication that served the same purpose, a procedure called functional communication training (FCT). Since the publication of that…

Summary of International Waste Management Programs (LLNL Input to SNL L3 MS: System-Wide Integration and Site Selection Concepts for Future Disposition Options for HLW)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenberg, Harris R.; Blink, James A.; Halsey, William G.

2011-08-11

The Used Fuel Disposition Campaign (UFDC) within the Department of Energy’s Office of Nuclear Energy (DOE-NE) Fuel Cycle Technology (FCT) program has been tasked with investigating the disposal of the nation’s spent nuclear fuel (SNF) and high-level nuclear waste (HLW) for a range of potential waste forms and geologic environments. This Lessons Learned task is part of a multi-laboratory effort, with this LLNL report providing input to a Level 3 SNL milestone (System-Wide Integration and Site Selection Concepts for Future Disposition Options for HLW). The work package number is: FTLL11UF0328; the work package title is: Technical Bases / Lessons Learned;more » the milestone number is: M41UF032802; and the milestone title is: “LLNL Input to SNL L3 MS: System-Wide Integration and Site Selection Concepts for Future Disposition Options for HLW”. The system-wide integration effort will integrate all aspects of waste management and disposal, integrating the waste generators, interim storage, transportation, and ultimate disposal at a repository site. The review of international experience in these areas is required to support future studies that address all of these components in an integrated manner. Note that this report is a snapshot of nuclear power infrastructure and international waste management programs that is current as of August 2011, with one notable exception. No attempt has been made to discuss the currently evolving world-wide response to the tragic consequences of the earthquake and tsunami that devastated Japan on March 11, 2011, leaving more than 15,000 people dead and more than 8,000 people missing, and severely damaging the Fukushima Daiichi nuclear power complex. Continuing efforts in FY 2012 will update the data, and summarize it in an Excel spreadsheet for easy comparison and assist in the knowledge management of the study cases.« less

An Elementary Proof of a Converse Mean-Value Theorem

ERIC Educational Resources Information Center

Almeida, Ricardo

2008-01-01

We present a new converse mean value theorem, with a rather elementary proof. [The work was supported by Centre for Research on Optimization and Control (CEOC) from the "Fundacaopara a Ciencia e a Tecnologia" FCT, co-financed by the European Community Fund FEDER/POCTI.

Silicon nitride ceramic development in Thales Alenia Space : qualification achievement and further developments for future applications

NASA Astrophysics Data System (ADS)

Cornillon, L.; Devilliers, C.; Behar-Lafenetre, S.; Ait-Zaid, S.; Berroth, K.; Bravo, A. C.

2017-11-01

Dealing with ceramic materials for more than two decades, Thales Alenia Space - France has identified Silicon Nitride Si3N4 as a high potential material for the manufacturing of stiff, stable and lightweight truss structure for future large telescopes. Indeed, for earth observation or astronomic observation, space mission requires more and more telescopes with high spatial resolution, which leads to the use of large primary mirrors, and a long distance between primary and secondary mirrors. Therefore current and future large space telescopes require a huge truss structure to hold and locate precisely the mirrors. Such large structure requires very strong materials with high specific stiffness and a low coefficient of thermal expansion (CTE). Based on the silicon nitride performances and on the know how of FCT Ingenieurkeramik to manufacture complex parts, Thales Alenia Space (TAS) has engaged, in cooperation with FCT, activities to develop and qualify silicon nitride parts for other applications for space projects.

Silicon nitride ceramic development in Thales Alenia Space: qualification achiement and further developments for future applications

NASA Astrophysics Data System (ADS)

Cornillon, L.; Devilliers, C.; Behar-Lafenetre, S.; Ait-Zaid, S.; Berroth, K.; Bravo, A. C.

2017-11-01

Dealing with ceramic materials for more than two decades, Thales Alenia Space - France has identified Silicon Nitride Si3N4 as a high potential material for the manufacturing of stiff, stable and lightweight truss structure for future large telescopes. Indeed, for earth observation or astronomic observation, space mission requires more and more telescopes with high spatial resolution, which leads to the use of large primary mirrors, and a long distance between primary and secondary mirrors. Therefore current and future large space telescopes require a huge truss structure to hold and locate precisely the mirrors. Such large structure requires very strong materials with high specific stiffness and a low coefficient of thermal expansion (CTE). Based on the silicon nitride performances and on the know how of FCT Ingenieurkeramik to manufacture complex parts, Thales Alenia Space (TAS) has engaged, in cooperation with FCT, activities to develop and qualify silicon nitride parts for other applications for space projects.

Correlative cryogenic tomography of cells using light and soft x-rays

PubMed Central

Smith, Elizabeth A.; Cinquin, Bertrand P.; Do, Myan; McDermott, Gerry; Le Gros, Mark A.; Larabell, Carolyn A.

2013-01-01

Correlated imaging is the process of imaging a specimen with two complementary modalities, and then combining the two data sets to create a highly informative, composite view. A recent implementation of this concept has been the combination of soft x-ray tomography (SXT) with fluorescence cryogenic microscopy (FCM). SXT-FCM is used to visualize cells that are held in a near-native, cryo-preserved state. The resultant images are, therefore, highly representative of both the cellular architecture and molecular organization in vivo. SXT quantitatively visualizes the cell and sub-cellular structures; FCM images the spatial distribution of fluorescently labeled molecules. Here, we review the characteristics of SXT-FCM, and briefly discuss how this method compares with existing correlative imaging techniques. We also describe how the incorporation of a cryo-rotation stage into a cryogenic fluorescence microscope allows acquisition of fluorescence cryogenic tomography (FCT) data. FCT is optimally suited to correlation with SXT, since both techniques image the specimen in 3-D, potentially with similar, isotropic spatial resolution. PMID:24355261

Software Design Description for the HYbrid Coordinate Ocean Model (HYCOM), Version 2.2

DTIC Science & Technology

2009-02-12

scalars. J. Phys. Oceanogr. 32: 240–264. Carnes, M., (2002). Data base description for the Generalized Digital Environmental Model ( GDEM -V) (U...Direction FCT Flux-Corrected Transport scheme GDEM Generalized Digital Environmental Model GISS NASA Goddard Institute for Space Studies GRD

A Component Analysis of Schedule Thinning during Functional Communication Training

ERIC Educational Resources Information Center

Betz, Alison M.; Fisher, Wayne W.; Roane, Henry S.; Mintz, Joslyn C.; Owen, Todd M.

2013-01-01

One limitation of functional communication training (FCT) is that individuals may request reinforcement via the functional communication response (FCR) at exceedingly high rates. Multiple schedules with alternating periods of reinforcement and extinction of the FCR combined with gradually lengthening the extinction-component interval can…

Providing Alternative Reinforcers to Facilitate Tolerance to Delayed Reinforcement Following Functional Communication Training

ERIC Educational Resources Information Center

Austin, Jillian E.; Tiger, Jeffrey H.

2015-01-01

The earliest stages of functional communication training (FCT) involve providing immediate and continuous reinforcement for a communicative response (FCR) that is functionally equivalent to the targeted problem behavior. However, maintaining immediate reinforcement is not practical, and the introduction of delays is associated with increased…

Analysis of Multiple Manding Topographies during Functional Communication Training

ERIC Educational Resources Information Center

Harding, Jay W.; Wacker, David P.; Berg, Wendy K.; Winborn-Kemmerer, Lisa; Lee, John F.; Ibrahimovic, Muska

2009-01-01

We evaluated the effects of reinforcing multiple manding topographies during functional communication training (FCT) to decrease problem behavior for three preschool-age children. During Phase 1, a functional analysis identified conditions that maintained problem behavior for each child. During Phase 2, the children's parents taught them to…

Evaluation of a Pre-Treatment Assessment to Select Mand Topographies for Functional Communication Training

ERIC Educational Resources Information Center

Ringdahl, Joel E.; Falcomata, Terry S.; Christensen, Tory J.; Bass-Ringdahl, Sandie M.; Lentz, Alison; Dutt, Anuradha; Schuh-Claus, Jessica

2009-01-01

Recent research has suggested that variables related to specific mand topographies targeted during functional communication training (FCT) can affect treatment outcomes. These include effort, novelty of mands, previous relationships with problem behavior, and preference. However, there is little extant research on procedures for identifying which…

Indirect Effects of Functional Communication Training on Non-Targeted Disruptive Behavior

ERIC Educational Resources Information Center

Schieltz, Kelly M.; Wacker, David P.; Harding, Jay W.; Berg, Wendy K.; Lee, John F.; Padilla Dalmau, Yaniz C.; Mews, Jayme; Ibrahimovic, Muska

2011-01-01

The purpose of this study was to evaluate the effects of functional communication training (FCT) on the occurrence of non-targeted disruptive behavior. The 10 participants were preschool-aged children with developmental disabilities who engaged in both destructive (property destruction, aggression, self-injury) and disruptive (hand flapping,…

Functional Communication Training in Children with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Battaglia, Dana

2017-01-01

This article explicitly addresses the correlation between communication and behavior, and describes how to provide intervention addressing these two overlapping domains using an intervention called functional communication training (FCT; E. G. Carr & Durand, 1985) in individuals with ASD. A step-by-step process is outlined with supporting…

An Evaluation of Generalization of Mands during Functional Communication Training

ERIC Educational Resources Information Center

Falcomata, Terry S.; Wacker, David P.; Ringdahl, Joel E.; Vinquist, Kelly; Dutt, Anuradha

2013-01-01

The primary purpose of this study was to evaluate the generalization of mands during functional communication training (FCT) and sign language training across functional contexts (i.e., positive reinforcement, negative reinforcement). A secondary purpose was to evaluate a training procedure based on stimulus control to teach manual signs. During…

Functional Communication Training without Extinction Using Concurrent Schedules of Differing Magnitudes of Reinforcement in Classrooms

ERIC Educational Resources Information Center

Davis, Dawn H.; Fredrick, Laura D.; Alberto, Paul A.; Gama, Roberto

2012-01-01

This study investigated the effects of functional communication training (FCT) implemented with concurrent schedules of differing magnitudes of reinforcement in lieu of extinction to reduce inappropriate behaviors and increase alternative mands. Participants were four adolescent students diagnosed with severe emotional and behavior disorders…

Pesticides in Ground Water Database A Compilation of ...

EPA Pesticide Factsheets

... t •-; i.j'ic? ... c-.ji ¦$ t.-e : -c* ., ~ . j «-3 jra ctrc $f*a :"^;i •fct-Of* of "¦*'Z""*Jt'C^ >?r3 ,i,:d,:-rj ss^/Ci' ~ ..t • i ¦ .2'iir4 \\'s ' ' • r; "• s .vnr *¦<;>p ica ^ •••* ...

Functional Communication Training in the Treatment of Problem Behavior Maintained by Access to Rituals

ERIC Educational Resources Information Center

Rispoli, Mandy; Camargo, Síglia; Machalicek, Wendy; Lang, Russell; Sigafoos, Jeff

2014-01-01

This study evaluated the assessment and treatment of problem behaviors related to rituals for children with autism. After functional analyses, we used a multiple-probe design to examine the effects of functional communication training (FCT) plus extinction and schedule thinning as a treatment package for problem behavior and appropriate…

Using Multiple Schedules during Functional Communication Training to Promote Rapid Transfer of Treatment Effects

ERIC Educational Resources Information Center

Fisher, Wayne W.; Greer, Brian D.; Fuhrman, Ashley M.; Querim, Angie C.

2015-01-01

Multiple schedules with signaled periods of reinforcement and extinction have been used to thin reinforcement schedules during functional communication training (FCT) to make the intervention more practical for parents and teachers. We evaluated whether these signals would also facilitate rapid transfer of treatment effects across settings and…

Functional Communication Training and Chained Schedules of Reinforcement to Treat Challenging Behavior Maintained by Terminations of Activity Interruptions

ERIC Educational Resources Information Center

Falcomata, Terry S.; Roane, Henry S.; Muething, Colin S.; Stephenson, Kasey M.; Ing, Anna D.

2012-01-01

In this article, the authors evaluated functional communication training (FCT) and a chained schedule of reinforcement for the treatment of challenging behavior exhibited by two individuals diagnosed with Asperger syndrome and autism, respectively. Following a functional analysis with undifferentiated results, the authors demonstrated that…

Further Evaluations of Functional Communication Training and Chained Schedules of Reinforcement to Treat Multiple Functions of Challenging Behavior

ERIC Educational Resources Information Center

Falcomata, Terry S.; Muething, Colin S.; Gainey, Summer; Hoffman, Katherine; Fragale, Christina

2013-01-01

We evaluated functional communication training (FCT) combined with a chained schedule of reinforcement procedure for the treatment of challenging behavior exhibited by two individuals diagnosed with Asperger syndrome and autism. Following functional analyses that suggested that challenging behavior served multiple functions for both participants,…

Trial-Based Functional Analysis and Functional Communication Training in an Early Childhood Setting

ERIC Educational Resources Information Center

Lambert, Joseph M.; Bloom, Sarah E.; Irvin, Jennifer

2012-01-01

Problem behavior is common in early childhood special education classrooms. Functional communication training (FCT; Carr & Durand, 1985) may reduce problem behavior but requires identification of its function. The trial-based functional analysis (FA) is a method that can be used to identify problem behavior function in schools. We conducted…

Discrete-Trial Functional Analysis and Functional Communication Training with Three Individuals with Autism and Severe Problem Behavior

ERIC Educational Resources Information Center

Schmidt, Jonathan D.; Drasgow, Erik; Halle, James W.; Martin, Christian A.; Bliss, Sacha A.

2014-01-01

Discrete-trial functional analysis (DTFA) is an experimental method for determining the variables maintaining problem behavior in the context of natural routines. Functional communication training (FCT) is an effective method for replacing problem behavior, once identified, with a functionally equivalent response. We implemented these procedures…

Correlative cryogenic tomography of cells using light and soft x-rays.

PubMed

Smith, Elizabeth A; Cinquin, Bertrand P; Do, Myan; McDermott, Gerry; Le Gros, Mark A; Larabell, Carolyn A

2014-08-01

Correlated imaging is the process of imaging a specimen with two complementary modalities, and then combining the two data sets to create a highly informative, composite view. A recent implementation of this concept has been the combination of soft x-ray tomography (SXT) with fluorescence cryogenic microscopy (FCM). SXT-FCM is used to visualize cells that are held in a near-native, cryopreserved. The resultant images are, therefore, highly representative of both the cellular architecture and molecular organization in vivo. SXT quantitatively visualizes the cell and sub-cellular structures; FCM images the spatial distribution of fluorescently labeled molecules. Here, we review the characteristics of SXT-FCM, and briefly discuss how this method compares with existing correlative imaging techniques. We also describe how the incorporation of a cryo-rotation stage into a cryogenic fluorescence microscope allows acquisition of fluorescence cryogenic tomography (FCT) data. FCT is optimally suited for correlation with SXT, since both techniques image the specimen in 3-D, potentially with similar, isotropic spatial resolution. © 2013 Elsevier B.V. All rights reserved.

Effect of first cannulation time and dialysis machine blood flows on survival of arteriovenous fistulas.

PubMed

Wilmink, Teun; Powers, Sarah; Hollingworth, Lee; Stevenson, Tamasin

2018-05-01

To study the effect of cannulation time on arteriovenous fistula (AVF) survival. Methods. Analysis of two prospective databases of access operations and dialysis sessions from 12 January 2002 through 4 January 2015 with follow-up until 4 January 2016. First cannulation time (FCT), defined from operation to first cannulation, was categorized as <2 weeks, 2-4 weeks, 4-8 weeks, 8-16 weeks and ≥16 weeks. Early cannulation was defined as FCT within 4 weeks. AVF survival was defined as the date until the AVF was abandoned. Maximum machine blood flow rate (BFR) for the first 29 dialysis sessions on AVF was analysed. Altogether, 1167 AVF with functional dialysis use were analysed: 667 (57%) radial cephalic AVF, 383 (33%) brachiocephalic AVF and 117 (10%) brachiobasilic AVF. The 631 (54%) AVF created in on-dialysis patients were analysed separately from 536 (46%) AVF created in pre-dialysis patients. AVF survival was similar between cannulation categories for both pre-dialysis patients (P = 0.19) and on-dialysis patients (P = 0.83). Early cannulation was associated with similar AVF survival in both pre-dialysis patients (P = 0.82) and on-dialysis patients (P = 0.17). Six consecutive successful cannulations from the start were associated with improved AVF survival (P = 0.0002). A below-median BFR at the start of dialysis was associated with better AVF survival (P < 0.0001). A below-median increase in BFR in the first 2 months was associated with worse AVF survival (P = 0.007). The type of AVF, diabetes, pre-dialysis state at operation and six successful cannulations from the start were independent predictors for AVF survival. FCT is not associated with AVF survival. Failures to achieve six successful cannulations from the start of dialysis and higher machine BFR in the first week of dialysis are associated with decreased AVF survival.

Novel approaches to helicopter obstacle warning

NASA Astrophysics Data System (ADS)

Seidel, Christian; Samuelis, Christian; Wegner, Matthias; Münsterer, Thomas; Rumpf, Thomas; Schwartz, Ingo

2006-05-01

EADS Germany is the world market leader in commercial Helicopter Laser Radar (HELLAS) Obstacle Warning Systems. The HELLAS-Warning System has been introduced into the market in 2000, is in service at German Border Control (Bundespolizei) and Royal Thai Airforce and is successfully evaluated by the Foreign Comparative Test Program (FCT) of the USSOCOM. Currently the successor system HELLAS-Awareness is in development. It will have extended sensor performance, enhanced realtime data processing capabilities and advanced HMI features. We will give an outline of the new sensor unit concerning detection technology and helicopter integration aspects. The system provides a widespread field of view with additional dynamic line of sight steering and a large detection range in combination with a high frame rate of 3Hz. The workflow of the data processing will be presented with focus on novel filter techniques and obstacle classification methods. As commonly known the former are indispensable due to unavoidable statistical measuring errors and solarisation. The amount of information in the filtered raw data is further reduced by ground segmentation. The remaining raised objects are extracted and classified in several stages into different obstacle classes. We will show the prioritization function which orders the obstacles concerning to their threat potential to the helicopter taking into account the actual flight dynamics. The priority of an object determines the display and provision of warnings to the pilot. Possible HMI representation includes video or FLIR overlay on multifunction displays, audio warnings and visualization of information on helmet mounted displays and digital maps. Different concepts will be presented.

Comparison between satellite wildfire databases in Europe

NASA Astrophysics Data System (ADS)

Amraoui, Malik; Pereira, Mário; DaCamara, Carlos

2013-04-01

For Europe, several databases of wildfires based on the satellite imagery are currently available and being used to conduct various studies and produce official reports. The European Forest Fire Information System (EFFIS) burned area perimeters database comprises fires with burnt area greater than 1.0 ha occurred in the Europe countries during the 2000 - 2011 period. The MODIS Burned Area Product (MCD45A1) is a monthly global Level 3 gridded 500m product containing per-pixel burning, quality information, and tile-level metadata. The Burned Area Product was developed by the MODIS Fire Team at the University of Maryland and is available April 2000 onwards. Finally, for Portugal the National Forest Authority (AFN) discloses the national mapping of burned areas of the years 1990 to 2011, based on Landsat imagery which accounts for fires larger than 5.0 ha. This study main objectives are: (i) provide a comprehensive description of the datasets, its limitations and potential; (ii) do preliminary statistics on the data; and, (iii) to compare the MODIS and EFFIS satellite wildfires databases throughout/across the entire European territory, based on indicators such as the spatial location of the burned areas and the extent of area burned annually and complement the analysis for Portugal will the inclusion of database AFN. This work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project FCOMP-01-0124-FEDER-022692, the project FLAIR (PTDC/AAC-AMB/104702/2008) and the EU 7th Framework Program through FUME (contract number 243888).

Design Management, Learning and Innovation: Results from a Portuguese Online Questionnaire

ERIC Educational Resources Information Center

Monteiro Barata, José M.

2013-01-01

This paper is an output of a Portuguese public research project: "DeSid"--"design as a company's strategic resource: a study of the impacts of design" (FCT). The "DeSid" research project was created with the main purpose to make a diagnosis of the use of design inside the Portuguese manufacturing industry. This paper…

Effects of Functional Communication Training (FCT) on the Communicative, Self-Initiated Toileting Behavior for Students with Developmental Disabilities in a School Setting

ERIC Educational Resources Information Center

Kim, Jinnie

2012-01-01

Far less is known about the effects of functional communication-based toileting interventions for students with developmental disabilities in a school setting. Furthermore, the currently available toileting interventions for students with disabilities include some undesirable procedures such as the use of punishment, unnatural clinic/university…

Effects of a Modified Milieu Therapy Intervention on the Social Communicative Behaviors of Young Children with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Mancil, G. Richmond; Conroy, Maureen A.; Haydon, Todd F.

2009-01-01

The purpose of the current study was to evaluate the effectiveness of combining milieu therapy and functional communication training (FCT) to replace aberrant behavior with functional communicative skills in 3 male preschool or elementary aged children with Autism Spectrum Disorders (ASD). Study activities were conducted in the natural…

The Long-Term Effects of Functional Communication Training Conducted in Young Children's Home Settings

ERIC Educational Resources Information Center

Wacker, David P.; Schieltz, Kelly M.; Berg, Wendy K.; Harding, Jay W.; Padilla Dalmau, Yaniz C.; Lee, John F.

2017-01-01

This article describes the results of a series of studies that involved functional communication training (FCT) conducted in children's homes by their parents. The 103 children who participated were six years old or younger, had developmental delays, and engaged in destructive behaviors such as self-injury. The core procedures used in each study…

A comparative study of advanced shock-capturing schemes applied to Burgers' equation

NASA Technical Reports Server (NTRS)

Yang, H. Q.; Przekwas, A. J.

1990-01-01

Several variations of the TVD scheme, ENO scheme, FCT scheme, and geometrical schemes, such as MUSCL and PPM, are considered. A comparative study of these schemes as applied to the Burgers' equation is presented. The objective is to assess their performance for problems involving formation and propagation of shocks, shock collisions, and expansion of discontinuities.

The contribution of PSInSAR interferometry to landslide susceptibility assessment in weak rock-dominated areas

NASA Astrophysics Data System (ADS)

Oliveira, Sérgio C.; Zêzere, José L.; Catalão, João; Nico, Giovanni

2015-04-01

In the Grande da Pipa river basin (north of Lisbon, Portugal), 64% of the landslides inventoried occur on a particular weak rock lithological unit composed by clay and with sandstone intercalations, that is present in 58% of the study (Oliveira et al., 2014). Deep-seated slow moving rotational slides occur essentially on this lithological unit and are responsible for the major damages verified along roads and buildings in the study area. Within this context, landslide hazard assessment, is limited by two major constrains: (i) the slope instability signs may not be sufficiently clear and observable and consequently may not be correctly identifiable through traditional geomorphologic survey techniques and (ii) the non-timely recognition of precursor signs of instability both in landslides activated for the first time and in previously landslide-affected areas (landslide reactivation). To encompass these limitations, the Persistent Scatterer synthetic aperture radar interferometry technique is applied to a data set of 16 TerraSAR-X SAR images, from April of 2010 to March of 2011, available for a small test site of 12.5 square kilometers (Laje-Salema) located on south-central part of the study area. This work's specific objectives are the following: (i) to evaluate the capacity of the Persistent Scatterer displacement maps in assessing landslide susceptibility at the regional scale, and (ii) to assess the capacity of landslide susceptibility maps based on historical landslide inventories to predict the location of actual terrain displacement measured by the Persistent Scatterers technique. Landslide susceptibility was assessed for the test site using the Information Value bivariate statistical method and the susceptibility scores were exported to the Grande da Pipa river basin. The independent validation of the landslide susceptibility maps was made using the historical landslide inventory and the Persistent Scatterer displacement map. Results are compared by computing the respective Receiver Operator Characteristic curves and calculating the corresponding Area Under the Curve. Reference: Oliveira, S.C.; Zêzere, J.L.; Catalão, J.; Nico, G. (2014) - The contribution of PSInSAR interferometry to landslide hazard in weak rock-dominated areas. Landslides, DOI 10.1007/s10346-014-0522-9 This work was supported by the FCT - Portuguese Foundation for Science and Technology and is within the framework of the Project Pan-European and nation-wide landslide susceptibility assessment, European and Mediterranean Major Hazards Agreement (EUR-OPA). The first author was funded by a postdoctoral grant (SFRH/BPD/85827/2012) from the Portuguese Foundation for Science and Technology (FCT).

An Analysis of Functional Communication Training as an Empirically Supported Treatment for Problem Behavior Displayed by Individuals with Intellectual Disabilities

ERIC Educational Resources Information Center

Kurtz, Patricia F.; Boelter, Eric W.; Jarmolowicz, David P.; Chin, Michelle D.; Hagopian, Louis P.

2011-01-01

This paper examines the literature on the use of functional communication training (FCT) as a treatment for problem behavior displayed by individuals with intellectual disabilities (ID). Criteria for empirically supported treatments developed by Divisions 12 and 16 of the American Psychological Association (Kratochwill & Stoiber, 2002; Task Force,…

The Use of Social Networking among Senior Secondary School Students in Abuja Municipal Area of Federal Capital Territory, Nigeria

ERIC Educational Resources Information Center

Ali, F. A. Farah; Aliyu, Umar Yanda

2015-01-01

The present study examined the use of social networking among senior secondary school students in Abuja Municipal Area Council of FCT. The study employed quantitative method for data collection involving questionnaire administration. Fifteen questions with Likert model and ten yes/no responses in a questionnaire were personally administered to 400…

Flux-corrected transport algorithms for continuous Galerkin methods based on high order Bernstein finite elements

NASA Astrophysics Data System (ADS)

Lohmann, Christoph; Kuzmin, Dmitri; Shadid, John N.; Mabuza, Sibusiso

2017-09-01

This work extends the flux-corrected transport (FCT) methodology to arbitrary order continuous finite element discretizations of scalar conservation laws on simplex meshes. Using Bernstein polynomials as local basis functions, we constrain the total variation of the numerical solution by imposing local discrete maximum principles on the Bézier net. The design of accuracy-preserving FCT schemes for high order Bernstein-Bézier finite elements requires the development of new algorithms and/or generalization of limiting techniques tailored for linear and multilinear Lagrange elements. In this paper, we propose (i) a new discrete upwinding strategy leading to local extremum bounded low order approximations with compact stencils, (ii) high order variational stabilization based on the difference between two gradient approximations, and (iii) new localized limiting techniques for antidiffusive element contributions. The optional use of a smoothness indicator, based on a second derivative test, makes it possible to potentially avoid unnecessary limiting at smooth extrema and achieve optimal convergence rates for problems with smooth solutions. The accuracy of the proposed schemes is assessed in numerical studies for the linear transport equation in 1D and 2D.

Genome-wide association study of the four-constitution medicine.

PubMed

Yin, Chang Shik; Park, Hi Joon; Chung, Joo-Ho; Lee, Hye-Jung; Lee, Byung-Cheol

2009-12-01

Four-constitution medicine (FCM), also known as Sasang constitutional medicine, and the heritage of the long history of individualized acupuncture medicine tradition, is one of the holistic and traditional systems of constitution to appraise and categorize individual differences into four major types. This study first reports a genome-wide association study on FCM, to explore the genetic basis of FCM and facilitate the integration of FCM with conventional individual differences research. Healthy individuals of the Korean population were classified into the four constitutional types (FCTs). A total of 353,202 single nucleotide polymorphisms (SNPs) were typed using whole genome amplified samples, and six-way comparison of FCM types provided lists of significantly differential SNPs. In one-to-one FCT comparisons, 15,944 SNPs were significantly differential, and 5 SNPs were commonly significant in all of the three comparisons. In one-to-two FCT comparisons, 22,616 SNPs were significantly differential, and 20 SNPs were commonly significant in all of the three comparison groups. This study presents the association between genome-wide SNP profiles and the categorization of the FCM, and it could further provide a starting point of genome-based identification and research of the constitutions of FCM.

The association between preceding drought occurrence and heat waves in the Mediterranean

NASA Astrophysics Data System (ADS)

Russo, Ana; Gouveia, Célia M.; Ramos, Alexandre M.; Páscoa, Patricia; Trigo, Ricardo M.

2017-04-01

A large number of weather driven extreme events has occurred worldwide in the last decade, namely in Europe that has been struck by record breaking extreme events with unprecedented socio-economic impacts, including the mega-heatwaves of 2003 in Europe and 2010 in Russia, and the large droughts in southwestern Europe in 2005 and 2012. The last IPCC report on extreme events points that a changing climate can lead to changes in the frequency, intensity, spatial extent, duration, and timing of weather and climate extremes. These, combined with larger exposure, can result in unprecedented risk to humans and ecosystems. In this context it is becoming increasingly relevant to improve the early identification and predictability of such events, as they negatively affect several socio-economic activities. Moreover, recent diagnostic and modelling experiments have confirmed that hot extremes are often preceded by surface moisture deficits in some regions throughout the world. In this study we analyze if the occurrence of hot extreme months is enhanced by the occurrence of preceding drought events throughout the Mediterranean area. In order to achieve this purpose, the number of hot days in the regions' hottest month will be associated with a drought indicator. The evolution and characterization of drought was analyzed using both the Standardized Precipitation Evaporation Index (SPEI) and the Standardized Precipitation Index (SPI), as obtained from CRU TS3.23 database for the period 1950-2014. We have used both SPI and SPEI for different time scales between 3 and 9 months with a spatial resolution of 0.5°. The number of hot days and nights per month (NHD and NHN) was determined using the ECAD-EOBS daily dataset for the same period and spatial resolution (dataset v14). The NHD and NHN were computed, respectively, as the number of days with a maximum or minimum temperature exceeding the 90th percentile. Results show that the most frequent hottest months for the Mediterranean region occur in July and August. Moreover, the magnitude of correlations between detrended NHD/NHN and the preceding 6- and 9-month SPEI/SPI are usually dimmer than for the 3 month time-scale. Most regions exhibit significantly negative correlations, i.e. high (low) NHD/NHN following negative (positive) SPEI/SPI values, and thus a potential for NHD/NHN early warning. Finally, correlations between the NHD/NHN with SPI and SPEI differ, with SPEI characterized by slightly higher values observed mainly for the 3-months time-scale. Acknowledgments: This work was partially supported by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project IMDROFLOOD (WaterJPI/0004/2014). Ana Russo thanks FCT for granted support (SFRH/BPD/99757/2014). A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012).

An Analysis of the Effects of Functional Communication and a Voice Output Communication Aid for a Child with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Olive, Melissa L.; Lang, Russell B.; Davis, Tonya N.

2008-01-01

The purpose of this study was to examine the effects of Functional Communication Training (FCT) and a Voice Output Communication Aid (VOCA) on the challenging behavior and language development of a 4-year-old girl with autism spectrum disorder. The participant's mother implemented modified functional analysis (FA) and intervention procedures in…

Differential Impact of Response Effort within a Response Chain on Use of Mands in a Student with Autism

ERIC Educational Resources Information Center

Buckley, Scott D.; Newchok, Debra K.

2005-01-01

We investigated the effects of response effort on the use of mands during functional communication training (FCT) in a participant with autism. The number of links in a picture exchange response chain determined two levels of response effort. Each level was paired with a fixed ratio (FR3) schedule of reinforcement for aggression in a reversal…

Moisture sources of the Atmospheric Rivers making landfall in western Europe

NASA Astrophysics Data System (ADS)

Trigo, Ricardo M.; Ramos, Alexandre M.; Nieto, Raquel; Tomé, Ricardo; Gimeno, Luis; Liberato, Margarida L. R.; Lavers, David A.

2017-04-01

An automated atmospheric river (AR) detection algorithm is used for the North Atlantic Ocean basin, allowing the identification of the major ARs affecting western European coasts between 1979 and 2012. The entire western coast of Europe was divided into five domains, namely the Iberian Peninsula (9.75W, 36-43.75N), France (4.5W, 43.75-50N), UK (4.5W, 50-59N), southern Scandinavia and the Netherlands (5.25E, 50-59N), and northern Scandinavia (5.25E, 59-70N). Following the identification of the main ARs that made landfall in western Europe, a Lagrangian analysis was then applied in order to identify the main areas where the moisture uptake was anomalous and contributed to the ARs reaching each domain. The Lagrangian data set used was obtained from the FLEXPART model global simulation from 1979 to 2012. The results show that, in general, for all regions considered, the major climatological areas for the anomalous moisture uptake extend along the subtropical North Atlantic, from the Florida Peninsula (northward of 20N) to each sink region, with the nearest coast to each sink region always appearing as a local maximum. In addition, during AR events the Atlantic subtropical source is reinforced and displaced, with a slight northward movement of the sources found when the sink region is positioned at higher latitudes. In conclusion, the results confirm not only the anomalous advection of moisture linked to ARs from subtropical ocean areas but also the existence of a tropical source, together with midlatitude anomaly sources at some locations closer to AR landfalls (Ramos et al., 2016). References: Ramos et al., (2016) Atmospheric rivers moisture sources from a Lagrangian perspective, Earth Syst. Dynam., 7, 371-384. Acknowledgements This work was supported by the project IMDROFLOOD - Improving Drought and Flood Early Warning, Forecasting and Mitigation using real-time hydroclimatic indicators (WaterJPI/0004/2014) funded by Fundação para a Ciência e a Tecnologia, Portugal (FCT). A. M. Ramos was supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012). Raquel Nieto acknowledges the support of the Xunta de Galicia, Spain, through THIS (EM2014/043) project.

Scenarios of atmospheric rivers affecting Western Europe during the XXI Century

NASA Astrophysics Data System (ADS)

Trigo, Ricardo M.; Ramos, Alexandre M.; Tomé, Ricardo; Liberato, Margarida L. R.; Pinto, Joaquim G.

2017-04-01

Extreme precipitation events in Europe during the winter half of the year have major socio-economic impacts associated with floods, landslides, extensive property damage and life losses. In recent years, a number of works have shed new light on the role played by Atmospheric Rivers (ARs) in the occurrence of extreme precipitation events in Europe as was the case in major historical floods in Duero (Pereira et al., 2016) and Tagus (Trigo et al., 2015) rivers in Iberia. We analyse ARs reaching Europe, for the extended winter months (October to March), in simulations from six CMIP5 global climate models (CGMs) to quantify possible changes during the current century, with emphasis in five western European prone coastal areas. ARs are represented reasonably well in GCMs for recent climate conditions (1980-2005). Increased vertically integrated horizontal water transport is found for 2074- 2099 (RCP4.5 and RCP8.5) compared to 1980-2005, while the number of ARs is projected to double on average for the same period. These changes are robust between models and are associated with higher air temperatures and thus enhanced atmospheric moisture content, together with higher precipitation associated with extra-tropical cyclones. This suggests an increased risk of intense precipitation and floods along the Atlantic European Coasts from the Iberian Peninsula to Scandinavia (Ramos et al., 2016). References: Pereira et al., (2016) Spatial impact and triggering conditions of the exceptional hydro-geomorphological event of December 1909 in Iberia, Nat. Hazards Earth Syst. Sci., 16, 371-390. Ramos et al., (2016) Projected changes in atmospheric rivers affecting Europe in CMIP5 models, Geophys. Res. Lett., 43, 9315-9323. Trigo et al., (2015) The record precipitation and flood event in Iberia in December 1876: description and synoptic analysis, Front. Earth Sci. 2:3. Acknowledgements This work was supported by the project FORLAND - Hydrogeomorphologic risk in Portugal: driving forces and application for land use planning (PTDC/ATPGEO/1660/2014) funded by Fundação para a Ciência e a Tecnologia, Portugal (FCT). A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012).

Impact of P2Y12 inhibition by clopidogrel on cardiovascular mortality in unselected patients treated by percutaneous coronary angioplasty: a prospective registry.

PubMed

El Ghannudi, Soraya; Ohlmann, Patrick; Meyer, Nicolas; Wiesel, Marie-Louise; Radulescu, Bogdan; Chauvin, Michel; Bareiss, Pierre; Gachet, Christian; Morel, Olivier

2010-06-01

The aim of this study was to determine whether low platelet response to the P2Y(12) receptor antagonist clopidogrel as assessed by Vasodilator-stimulated phosphoprotein flow cytometry test (VASP- FCT) predicts cardiovascular events in a high-risk population undergoing percutaneous coronary intervention (PCI). Impaired platelet responsiveness to clopidogrel is thought to be a determinant of cardiovascular events after PCI. The platelet VASP-FCT is a new assay specific to the P2Y(12) adenosine diphosphate receptor-pathway. In this test, platelet activation is expressed as platelet reactivity index (PRI). Four-hundred sixty-one unselected patients undergoing urgent (n = 346) or planned (n = 115) PCI were prospectively enrolled. Patients were classified as low-response (LR) and response (R) to clopidogrel, depending on their PRI. Optimal PRI cutoff was determined by receiver-operator characteristic curve analysis to 61% (LR: PRI > or =61% and R: PRI <61%). Follow-up was obtained at a mean of 9 +/- 2 months in 453 patients (98.3%). At follow-up, total cardiac mortality rates and possible and total stent thrombosis were higher in LR patients. Multivariate analysis identified creatinine clearance (hazard ratio [HR]: 0.95; 95% confidence interval [CI]: 0.93 to 0.98, p < 0.001), drug-eluting stent (HR: 5.73; 95% CI: 1.40 to 23.43, p = 0.015), C-reactive protein (HR: 1.01; 95% CI: 1.001 to 1.019, p = 0.024), and LR to clopidogrel (HR: 4.00; 95% CI: 1.08 to 14.80, p = 0.037) as independent predictors of cardiac death. The deleterious impact of LR to clopidogrel on cardiovascular death was significantly higher in patients implanted with drug-eluting stent. In patients undergoing PCI, LR to clopidogrel assessed by VASP-FCT is an independent predictor of cardiovascular death at the PRI cutoff value of > or =61%. The LR clinical impact seems to be dependent on the type of stent implanted. Copyright 2010 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Helicopter collision avoidance and brown-out recovery with HELLAS

NASA Astrophysics Data System (ADS)

Seidel, Christian; Schwartz, Ingo; Kielhorn, Peter

2008-10-01

EADS Germany is the world market leader in commercial and military Helicopter Laser Radar (HELLAS) Obstacle Warning Systems. The HELLAS-Warning System has been introduced into the market in 2000, is in service at German Federal Police and Royal Thai Air Force. HELLAS was also successfully evaluated by the Foreign Comparative Test Program (FCT) of the U.S. Army and other governmental agencies. Currently the successor system for military applications, HELLAS-Awareness, is in qualification phase. It will have extended sensor performance, enhanced real-time data processing capabilities and advanced human machine interface (HMI) features. Flight tests on NH90 helicopter have been successfully performed. Helicopter series integration is scheduled to begin from 2009. We will give an outline of the new sensor unit concerning detection technology and helicopter integration aspects. The system provides a widespread field of view with additional dynamic line of sight steering and a large detection range in combination with a high frame rate. We will show the HMI representations. This HELLAS system is the basis for a 3 dimensional see-and-remember-system for brown-out recovery. When landing in sandy or dusty areas the downwash of the helicopter rotor causes clouds of visually-restrictive material that can completely obstruct the pilot's outside reference, resulting in a complete loss of situational awareness and spatial orientation of the pilot which can end up in total loss of aircraft control and dangerous accidents. The brown-out recovery system presented here creates an augmented enhanced synthetic vision of the landing area with the surrounding which is based on HELLAS range image data as well as altimeter and inertial reference information.

Multivariate statistical analysis of wildfires in Portugal

NASA Astrophysics Data System (ADS)

Costa, Ricardo; Caramelo, Liliana; Pereira, Mário

2013-04-01

Several studies demonstrate that wildfires in Portugal present high temporal and spatial variability as well as cluster behavior (Pereira et al., 2005, 2011). This study aims to contribute to the characterization of the fire regime in Portugal with the multivariate statistical analysis of the time series of number of fires and area burned in Portugal during the 1980 - 2009 period. The data used in the analysis is an extended version of the Rural Fire Portuguese Database (PRFD) (Pereira et al, 2011), provided by the National Forest Authority (Autoridade Florestal Nacional, AFN), the Portuguese Forest Service, which includes information for more than 500,000 fire records. There are many multiple advanced techniques for examining the relationships among multiple time series at the same time (e.g., canonical correlation analysis, principal components analysis, factor analysis, path analysis, multiple analyses of variance, clustering systems). This study compares and discusses the results obtained with these different techniques. Pereira, M.G., Trigo, R.M., DaCamara, C.C., Pereira, J.M.C., Leite, S.M., 2005: "Synoptic patterns associated with large summer forest fires in Portugal". Agricultural and Forest Meteorology. 129, 11-25. Pereira, M. G., Malamud, B. D., Trigo, R. M., and Alves, P. I.: The history and characteristics of the 1980-2005 Portuguese rural fire database, Nat. Hazards Earth Syst. Sci., 11, 3343-3358, doi:10.5194/nhess-11-3343-2011, 2011 This work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project FCOMP-01-0124-FEDER-022692, the project FLAIR (PTDC/AAC-AMB/104702/2008) and the EU 7th Framework Program through FUME (contract number 243888).

Assessment of Cyclic Lifetime of NiCoCrAlY/ZrO2-Based EB-PVD TBC Systems via Reactive Element Enrichment in the Mixed Zone of the TGO Scale

NASA Astrophysics Data System (ADS)

Fritscher, Klaus; Braue, Wolfgang; Schulz, Uwe

2013-05-01

The chemical composition of the alumina-zirconia mixed zone (MZ) of an electron beam physical vapor deposited thermal barrier coating (EB-PVD TBC) system is affected by service conditions and by the interdiffusion of elements from the substrate alloy below and the zirconia top coat. Three NiCoCrAlY bond-coated Ni-base substrates with YPSZ or CeSZ EB-PVD TBCs were subjected to a cyclic furnace oxidation test (FCT) at 1373 K (1100 °C) in order to provide experimental evidence of a link between chemistry of the MZ, the substrate alloy, the ceramic top coat, and the time in the FCT. Energy dispersive spectroscopy of the MZ revealed preferred accumulation of Cr, Zr, Y, and Ce. The concentration of the reactive elements (RE = Ce + Y + Zr) was related to the respective average lifetimes of the TBC systems at 1373 K (1100 °C). The RE content in the MZ turned out to be a life-limiting parameter for YPSZ and CeSZ TBC systems which can be utilized to predict their relative lifetimes on the individual substrates. Conversely, the TBC failure mechanisms of YPSZ and CeSZ TBC systems are dissimilar.

The use of flow cytometry to accurately ascertain total and viable counts of Lactobacillus rhamnosus in chocolate.

PubMed

Raymond, Yves; Champagne, Claude P

2015-04-01

The goals of this study were to evaluate the precision and accuracy of flow cytometry (FC) methodologies in the evaluation of populations of probiotic bacteria (Lactobacillus rhamnosus R0011) in two commercial dried forms, and ascertain the challenges in enumerating them in a chocolate matrix. FC analyses of total (FC(T)) and viable (FC(V)) counts in liquid or dried cultures were almost two times more precise (reproducible) than traditional direct microscopic counts (DCM) or colony forming units (CFU). With FC, it was possible to ascertain low levels of dead cells (FC(D)) in fresh cultures, which is not possible with traditional CFU and DMC methodologies. There was no interference of chocolate solids on FC counts of probiotics when inoculation was above 10(7) bacteria per g. Addition of probiotics in chocolate at 40 °C resulted in a 37% loss in viable cells. Blending of the probiotic powder into chocolate was not uniform which raised a concern that the precision of viable counts could suffer. FCT data can serve to identify the correct inoculation level of a sample, and viable counts (FCV or CFU) can subsequently be better interpreted. Crown Copyright © 2014. Published by Elsevier Ltd. All rights reserved.

Developing a food exchange list for Middle Eastern appetizers and desserts commonly consumed in Jordan

PubMed Central

BAWADI, Hiba A.; AL-SHWAIYAT, Naseem M.; TAYYEM, Reema F.; MEKARY, Rania; TUURI, Georgianna

2011-01-01

Aim This study was conducted to develop a meal-planning exchange list for Middle Eastern foods commonly included in the Jordanian cuisine. Forty types of appetizers and another 40 types of desserts were selected; with five different recipes for each item. Recipes were collected from different housewives and Arabic cookbooks. Ingredients’ weight and dish net weight were recorded based on an average recipe, and dishes were prepared accordingly. Dishes were proximately analyzed following the AOAC procedures. Proximate analysis was compared to the WHO-food composition tables (FCT) for the use in the Middle East, and with food analysis software (ESHA). Results Significant correlations (P < 0.001) were found between macronutrient content obtained from proximate analysis and those obtained from ESHA. The correlation coefficients (r) were 0.92 for carbohydrate, 0.86 for protein, and 0.86 for fat. Strong correlations were also detected between proximate analysis FCT for carbohydrate (r=0.91, P<0.001) and protein (r=0.81; P<0.001) contents. However, this significant correlation was not found as strong, yet significant for fat (r=0. 62, P<0.001). Conclusion A valid exchange system for traditional desserts and appetizers is now available and ready to be used by dietitians and health care providers in Jordan and Arab World. PMID:21841913

Developing a food exchange list for Middle Eastern appetizers and desserts commonly consumed in Jordan.

PubMed

Bawadi, Hiba A; Al-Shwaiyat, Naseem M; Tayyem, Reema F; Mekary, Rania; Tuuri, Georgianna

2009-03-01

AIM: This study was conducted to develop a meal-planning exchange list for Middle Eastern foods commonly included in the Jordanian cuisine. Forty types of appetizers and another 40 types of desserts were selected; with five different recipes for each item. Recipes were collected from different housewives and Arabic cookbooks. Ingredients' weight and dish net weight were recorded based on an average recipe, and dishes were prepared accordingly. Dishes were proximately analyzed following the AOAC procedures. Proximate analysis was compared to the WHO-food composition tables (FCT) for the use in the Middle East, and with food analysis software (ESHA). RESULTS: Significant correlations (P < 0.001) were found between macronutrient content obtained from proximate analysis and those obtained from ESHA. The correlation coefficients (r) were 0.92 for carbohydrate, 0.86 for protein, and 0.86 for fat. Strong correlations were also detected between proximate analysis FCT for carbohydrate (r=0.91, P<0.001) and protein (r=0.81; P<0.001) contents. However, this significant correlation was not found as strong, yet significant for fat (r=0. 62, P<0.001). CONCLUSION: A valid exchange system for traditional desserts and appetizers is now available and ready to be used by dietitians and health care providers in Jordan and Arab World.

Biofilm formation of beta-hemolytic group G Streptococcus dysgalactiae subspecies equisimilis isolates and its association with emm polymorphism.

PubMed

Ma, Jui-Shan; Chen, Sin-Yu; Lo, Hsueh-Hsia

2017-11-01

Biofilm formation has been well known as a determinant of bacterial virulence. Group G Streptococcus dysgalactiae subspecies equisimilis (SDSE), a relevant pathogen with increasing medical importance, was evaluated for the biofilm-forming potential. Microtiter plate assay was used to assess the most feasible medium for group G SDSE to form a biofilm. Among 246 SDSE isolates examined, 46.7%, 43.5%, 33.3%, and 26.4% of isolates showed moderate or strong biofilm-forming abilities using tryptic soy broth (TSB), brain heart infusion broth (BHI), Todd-Hewitt broth (THB), and C medium with 30 mM glucose (CMG), respectively. The addition of glucose significantly increased the biofilm-forming ability of group G SDSE. FCT (fibronectin-collagen-T-antigen) typing of SDSE was first undertaken and 11 FCT types were found. Positive associations of stG10.0 or negative associations of stG245.0, stG840.0, and stG6.1 with biofilm-forming ability of SDSE were, respectively, found. This was the first investigation demonstrating biofilm-forming potential in clinical group G SDSE isolates; also, some significant associations of biofilm-forming ability with certain emm types were presented. © 2017 APMIS. Published by John Wiley & Sons Ltd.

Developing a corss-project support system during mission operations: Deep Space 1 extended mission flight control

NASA Technical Reports Server (NTRS)

Scarffe, V. A.

2002-01-01

NASA is focusing on small, low-cost spacecraft for both planetary and earth science missions. Deep Space 1 (DS1) was the first mission to be launched by the NMP. The New Millennium Project (NMP) is designed to develop and test new technology that can be used on future science missions with lower cost and risk. The NMP is finding ways to reduce cost not only in development, but also in operations. DS 1 was approved for an extended mission, but the budget was not large, so the project began looking into part time team members shared with other projects. DS1 launched on October 24, 1998, in it's primary mission it successfully tested twelve new technologies. The extended mission started September 18, 1999 and ran through the encounter with Comet Borrelly on September 22,2001. The Flight Control Team (FCT) was one team that needed to use part time or multi mission people. Circumstances led to a situation where for the few months before the Borrelly encounter in September of 2001 DSl had no certified full time Flight Control Engineers also known as Aces. This paper examines how DS 1 utilized cross-project support including the communication between different projects, and the how the tools used by the Flight Control Engineer fit into cross-project support.

Exploring the CIGALA/CALIBRA network data base for supporting space weather service over Brazil

NASA Astrophysics Data System (ADS)

Galera Monico, Joao Francisco; Shimabukuro, Milton; Vani, Bruno; Stuani, Vinicius

Most of Brazil region is surrounded by equatorial anomaly northwards and southwards. Therefore, investigations related to space weather are quite important and very demanding. For example, GNSS applications are widely affected by ionospheric disturbances, a significant field within space weather. A network for continuous monitoring of ionosphere was deployed over its territory, starting on February/2011. This network was named CIGALA/CALIBRA according to the names of the two projects which originated it. Through CIGALA (Concept for Ionospheric Scintillation Mitigation for Professional GNSS in Latin America), which was funded by European Commission (EC) in the framework of the FP7-GALILEO-2009-GSA (European GNSS Agency), the first stations were deployed at Presidente Prudente, São Paulo state, at February 2011. CIGALA Project was finalized at February 2012 with eight stations distributed over the Brazilian territory. Through CALIBRA (Countering GNSS high Accuracy applications Limitations due to Ionospheric disturbances in BRAzil), which is also funded by the European Commission now in the framework of the FP7-GALILEO-2011-GSA, new stations were deployed. All monitoring stations were specifically placed at locations following geomagnetic arrangements for supporting development of ionospheric models. CALIBRA project started at November 2012 and will have two years of duration, focusing on development of new algorithms that can be applied to high accuracy GNSS techniques (RTK, PPP) in order to tackle the effects of ionospheric disturbances. All the stations have PolarRxS-PRO receivers, manufactured by Septentrio®. This multi-GNSS receiver can collect data up to 100 Hz rates, providing ionospheric indices like TEC, scintillation parameters like S4 and Sigma-Phi, and other signal metrics like locktime for all satellites and frequencies tracked. All collected data is sent to a central facility located at the Faculdade de Ciências e Tecnologia da Universidade Estadual Paulista (FCT/UNESP) in Presidente Prudente. For dealing with the large amount of data, an analysis infrastructure was also being established, which is in constant development. It is the web software named ISMR Query Tool, which provide query and visualization of the scintillation parameters, with capabilities on identifying specific behaviors of ionosphere activity through data visualization and data mining. Its web availability and user-specified features allow the users to interact with data through a simple internet connection, enlarging insights about the ionosphere according with their own previous knowledge. Information about the network, the projects and the tool can be found at the FCT/UNESP Ionosphere web portal available at http://is-cigala-calibra.fct.unesp.br/. At this contribution we will provide an overview of results extracted from the monitoring and analysis infrastructures, explaining the possibilities provided by ISMR Query Tool supporting analysis of the ionosphere and the development of models or mitigation techniques to GNSS. At this moment, at least until the end of the CALIBRA project, this service is free available to users that request access to FCT/UNESP. We also would like to discuss means of financing and keeping the service available at a minimum cost after the end of the project.

Forest fires caused by lightning activity in Portugal

NASA Astrophysics Data System (ADS)

Russo, Ana; Ramos, Alexandre M.; Benali, Akli; Trigo, Ricardo M.

2017-04-01

Wildfires in southern Europe have been causing in the last decades extensive economic and ecological losses and, even human casualties (e.g. Pereira et al., 2011). According to statistics provided by the EC-JRC European Forest Fires Information System (EFFIS) for Europe, the years of 2003 and 2007 represent the most dramatic fire seasons since the beginning of the millennium, followed by the years 2005 and 2012. These extreme years registered total annual burned areas for Europe of over 600.000 ha, reaching 800.000 ha in 2003. Over Iberia and France, the exceptional fire seasons registered in 2003 and 2005 were coincident respectively with one of the most severe heatwaves (Bastos et al., 2014) and droughts of the 20th century (Gouveia et al., 2009). On the other hand, the year 2007 was very peculiar as the area of the Peloponnese was struck by a severe winter drought followed by a subsequent wet spring, being also stricken by three heat heaves during summer and played a major role increasing the susceptibility of the region to wildfires (Gouveia et al., 2016). Some countries have a relatively large fraction of fires caused by natural factors such as lightning, e.g. northwestern USA, Canada, Russia. In contrast, Mediterranean countries such as Portugal has only a small percentage of fire records caused by lightning. Although significant uncertainties remain for the triggering mechanism for the majority of fires registered in the catalog, since they were cataloged without a likely cause. In this work we have used mainly two different databases: 1) the Portuguese Rural Fire Database (PRFD) which is representative of rural fires that have occurred in Continental Portugal, 2002-2009, with the original data provided by the National forestry Authority; 2) lightning discharges location which were extracted from the Portuguese Lightning Location System that has been in service since June of 2002 and is operated by the national weather service - Portuguese Institute for Sea and Atmosphere (IPMA). The main objective of this work was to evaluate and quantify the relations between the wildfires' occurrence and the lightning activity. In particularly we were able to verify if wildfires which were identified as "ignited by lightning" by comparing its location to the lightning discharges location database. Furthermore we have also investigated possible fire ignition by lightning discharges that have not yet been labeled in the PRFD by comparing daily data from both datasets. - Bastos A., Gouveia C.M., Trigo R.M., Running S.W., 2014. Biogeosciences, 11, 3421-3435. - Pereira M.G., B.D. Malamud R.M. Trigo, P.I. Alves, 2011. Nat. Hazards Earth Syst. Sci., 11, 3343-3358. - Gouveia C., Trigo R.M., DaCamara C.C., 2009. Nat. Hazards Earth Syst. Sci., 9, 185-195 - Gouveia C.M., Bistinas I., Liberato M.L.R., Bastos A., Koutsiasd N., Trigo R., 2016. Agricultural and Forest Meteorology, 218-219, 135-145. Acknowledgements Research performed was supported by FAPESP/FCT Project Brazilian Fire-Land-Atmosphere System (BrFLAS) (1389/2014 and 2015/01389-4). Ana Russo thanks FCT for granted support (SFRH/BPD/99757/2014). A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012).

Hydro-geomorphologic events in Portugal and its association with Circulation weather types

NASA Astrophysics Data System (ADS)

Pereira, Susana; Ramos, Alexandre M.; Rebelo, Luís; Trigo, Ricardo M.; Zêzere, José L.

2017-04-01

Floods and landslides correspond to the most hazardous weather driven natural disasters in Portugal. A recent improvement on their characterization has been achieved with the gathering of basic information on past floods and landslides that caused social consequences in Portugal for the period 1865-2015 through the DISASTER database (Zêzere et al., 2014). This database was built under the assumption that strong social impacts of floods and landslides are sufficient relevant to be reported consistently by national and regional newspapers. The DISASTER database contains detailed information on the location, date of occurrence and social impacts (fatalities, injuries, missing people, evacuated and homeless people) of each individual hydro-geomorphologic case (1677 flood cases and 292 landslide cases). These hydro-geomorphologic disaster cases are grouped in a restrict number of DISASTER events that were selected according to the following criteria: a set of at least 3 DISASTER cases sharing the same trigger in time (with no more than 3 days without cases), which have a widespread spatial extension related to the triggering mechanism and a certain magnitude. In total, the DISASTER database includes 134 events (3.7 average days of duration) that generated high social impacts in Portugal (962 fatalities and 40878 homeless people). Each DISASTER event was characterized with the following attributes: hydro-geomorphologic event type (e.g landslides, floods, flash floods, urban floods); date of occurrence (year, month and days); duration in days; spatial location in GIS; number of fatalities, injured, evacuated and homeless people; and weather type responsible for triggering the event. The atmospheric forcing at different time scales is the main trigger for the hydro-meteorological DISASTER events occurred in Portugal. In this regard there is an urge for a more systematic assessment of the weather types associated to flood and landslide damaging events to correctly characterize the climatic forcing of hydro-geomorphologic risk in Portugal. The weather type classification used herein is an automated version of the Lamb weather type procedure, initially developed for the United Kingdom and often named circulation weather types (CWT) and latter adapted for Portugal. We computed the daily CWT for the 1865-2015 period by means of the daily SLP retrieved from the 20 Century Reanalysis dataset. The relationship between the CWTs and the hydro-meteorological events in Portugal shows that the cyclonic, westerly and southwesterly are CWTs frequently associated with major socio-economic impacts of DISASTER events. In addition, CWT basic variables (flow strength, vorticity and direction) were used to better understand the impacts of the meteorological conditions in the hydro-meteorological events in Portugal. Reference: Zêzere, J. L., Pereira, S., Tavares, A. O., Bateira, C., Trigo, R. M., Quaresma, I., Santos, P. P., Santos, M. and Verde, J.: DISASTER: a GIS database on hydro-geomorphologic disasters in Portugal, Nat. Hazards, 72(2), 503-532, doi:10.1007/s11069-013-1018-y, 2014. This work was supported by the project FORLAND - Hydrogeomorphologic risk in Portugal: driving forces and application for land use planning [grant number PTDC/ATPGEO/1660/2014] funded by the Portuguese Foundation for Science and Technology (FCT), Portugal. A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/ SFRH/BPD/84328/2012).

Modelling crop yield in Iberia under drought conditions

NASA Astrophysics Data System (ADS)

Ribeiro, Andreia; Páscoa, Patrícia; Russo, Ana; Gouveia, Célia

2017-04-01

The improved assessment of the cereal yield and crop loss under drought conditions are essential to meet the increasing economy demands. The growing frequency and severity of the extreme drought conditions in the Iberian Peninsula (IP) has been likely responsible for negative impacts on agriculture, namely on crop yield losses. Therefore, a continuous monitoring of vegetation activity and a reliable estimation of drought impacts is crucial to contribute for the agricultural drought management and development of suitable information tools. This works aims to assess the influence of drought conditions in agricultural yields over the IP, considering cereal yields from mainly rainfed agriculture for the provinces with higher productivity. The main target is to develop a strategy to model drought risk on agriculture for wheat yield at a province level. In order to achieve this goal a combined assessment was made using a drought indicator (Standardized Precipitation Evapotranspiration Index, SPEI) to evaluate drought conditions together with a widely used vegetation index (Normalized Difference Vegetation Index, NDVI) to monitor vegetation activity. A correlation analysis between detrended wheat yield and SPEI was performed in order to assess the vegetation response to each time scale of drought occurrence and also identify the moment of the vegetative cycle when the crop yields are more vulnerable to drought conditions. The time scales and months of SPEI, together with the months of NDVI, better related with wheat yield were chosen to perform a multivariate regression analysis to simulate crop yield. Model results are satisfactory and highlighted the usefulness of such analysis in the framework of developing a drought risk model for crop yields. In terms of an operational point of view, the results aim to contribute to an improved understanding of crop yield management under dry conditions, particularly adding substantial information on the advantages of combining vegetation and hydro-meteorological drought indices for the assessment of cereal yield. Moreover, the present study will provide some guidance on user's decision making process in agricultural practices in the IP, assisting farmers in deciding whether to purchase crop insurance. Acknowledgements: This work was partially supported by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project IMDROFLOOD (WaterJPI/0004/2014). Ana Russo thanks FCT for granted support (SFRH/BPD/99757/2014). Andreia Ribeiro also thanks FCT for grant PD/BD/114481/2016.

Characteristics of storms that contribute to extreme precipitation events over the Iberian Peninsula

NASA Astrophysics Data System (ADS)

Trigo, Ricardo; Ramos, Alexandre M.; Ordoñez, Paulina; Liberato, Margarida L. R.; Trigo, Isabel F.

2014-05-01

Floods correspond to one of the most deadly natural disasters in the Iberian Peninsula during the last century. Quite often these floods are associated to intense low pressure systems with an Atlantic origin. In recent years a number of episodes have been evaluated on a case-by-case approach, with a clear focus on extreme events, thus lacking a systematic assessment. In this study we focus on the characteristics of storms for the extended winter season (October to March) that are responsible for the most extreme rainfall events over large areas of the Iberian Peninsula. An objective method for ranking daily precipitation events during the extended winter is used based on the most comprehensive database of high resolution (0.2º latitude by 0.2º longitude) gridded daily precipitation dataset available for the Iberian Peninsula. The magnitude of an event is obtained after considering the total area affected as well as its intensity in every grid point (taking into account the daily normalised departure from climatology). Different precipitation rankings are studied considering the entire Iberian Peninsula, Portugal and also the six largest river basins in the Iberian Peninsula (Duero, Ebro, Tagus, Minho, Guadiana and Guadalquivir). Using an objective cyclone detecting and tracking scheme [Trigo, 2006] the storm track and characteristics of the cyclones were obtained using the ERA-Interim reanalyses for the 1979-2008 period. The spatial distribution of extratropical cyclone positions when the precipitation extremes occur will be analysed over the considered sub-domains (Iberia, Portugal, major river basins). In addition, we distinguish the different cyclone characteristics (lifetime, direction, minimum pressure, position, velocity, vorticity and radius) with significant impacts in precipitation over the different domains in the Iberian Peninsula. This work was partially supported by FEDER (Fundo Europeu de Desenvolvimento Regional) funds through the COMPETE (Programa Operacional Factores de Competitividade) and by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project STORMEx FCOMP-01-0124-FEDER- 019524 (PTDC/AAC-CLI/121339/2010). A. M. Ramos was also supported by a FCT postdoctoral Grant (FCT/DFRH/SFRH/BPD/84328/2012). Trigo I. F. (2006) Climatology and interannual variability of storm-tracks in the Euro-Atlantic sector: A comparison between ERA-40 and NCEP/NCAR reanalyses. Clim. Dyn., 26, 127-143.

Laser ablation U-Th-Sm/He dating of detrital apatite

NASA Astrophysics Data System (ADS)

Guest, B.; Pickering, J. E.; Matthews, W.; Hamilton, B.; Sykes, C.

2016-12-01

Detrital apatite U-Th-Sm/He thermochronology has the potential to be a powerful tool for conducting basin thermal history analyses as well as complementing the well-established detrital zircon U-Pb approach in source to sink studies. A critical roadblock that prevents the routine application of detrital apatite U-Th-Sm/He thermochronology to solving geological problems is the costly and difficult whole grain approach that is generally used to obtain apatite U-Th-Sm/He data. We present a new analytical method for laser ablation thermochronology on apatite. Samples are ablated using a Resonetics™ 193 nm excimer laser and liberated 4He is measured using an ASI (Australian Scientific Instruments) Alphachron™ quadrupole mass spectrometer system; collectively known as the Resochron™. The ablated sites are imaged using a Zygo ZescopeTM optical profilometer and ablated pit volume measured using PitVol, a custom MatLabTM algorithm. The accuracy and precision of the method presented here was confirmed using well-characterized Durango apatite and Fish Canyon Tuff (FCT) apatite reference materials, with Durango apatite used as a primary reference and FCT apatite used as a secondary reference. The weighted average of our laser ablation Durango ages (30.5±0.35 Ma) compare well with ages obtained using conventional whole grain degassing and dissolution U-Th-Sm/He methods (32.56±0.43 Ma) (Jonckheere et.al., 1 993; Farley, 2000; McDowell et.al., 2005) for chips of the same Durango crystal. These Durango ages were used to produce a K-value to correct the secondary references and unknown samples. After correction, FCT apatite has a weighted average age of 28.37 ± 0.96 Ma, which agrees well with published ages. As a further test of this new method we have conducted a case study on a set of samples from the British Mountains of the Yukon Territory in NW Canada. Sandstone samples collected across the British Mountains were analyzed using conventional U-Th-Sm/He whole grain methods and then reanalyzed using our new Laser ablation approach. The laser ablation results are consistent with those obtained using conventional methods, confirming that apatite laser ablation U-Th-Sm/He thermochronology is a viable alternative for collecting large low temperature thermochronology data sets from detrital samples.

BiDiBlast: comparative genomics pipeline for the PC.

PubMed

de Almeida, João M G C F

2010-06-01

Bi-directional BLAST is a simple approach to detect, annotate, and analyze candidate orthologous or paralogous sequences in a single go. This procedure is usually confined to the realm of customized Perl scripts, usually tuned for UNIX-like environments. Porting those scripts to other operating systems involves refactoring them, and also the installation of the Perl programming environment with the required libraries. To overcome these limitations, a data pipeline was implemented in Java. This application submits two batches of sequences to local versions of the NCBI BLAST tool, manages result lists, and refines both bi-directional and simple hits. GO Slim terms are attached to hits, several statistics are derived, and molecular evolution rates are estimated through PAML. The results are written to a set of delimited text tables intended for further analysis. The provided graphic user interface allows a friendly interaction with this application, which is documented and available to download at http://moodle.fct.unl.pt/course/view.php?id=2079 or https://sourceforge.net/projects/bidiblast/ under the GNU GPL license. Copyright 2010 Beijing Genomics Institute. Published by Elsevier Ltd. All rights reserved.

Functional Genomics of a Non-Toxic Alexandrium Lusitanicum Culture

DTIC Science & Technology

2007-02-01

OCE-0402707. This work was also supported by a graduate fellowship from the Fundacao para a Ciencia e Tecnologia , Portugal. Reproduction in whole or...that lead to this point. This work was supported by a graduate fellowship from the Fundaqa-o para a Ciencia e Tecnologia , Portugal. 3 4 TABLE OF...from the Fundaqo para a Ci~ncia e cultures (data not shown). It is therefore possible that the Tecnologia (FCT), Portugal. Funding provided in part

Report on FY16 Low-dose Metal Fuel Irradiation and PIE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edmondson, Philip D.

2016-09-01

This report gives an overview of the efforts into the low-dose metal fuel irradiation and PIE as part of the Fuel Cycle Research & Development (FCRD) Advanced Fuels Campaign (AFC) milestone M3FT-16OR020303031. The current status of the FCT and FCRP irradiation campaigns are given including a description of the materials that have been irradiated, analysis of the passive temperature monitors, and the initial PIE efforts of the fuel samples.

A Generalized Approach to Equational Unification.

DTIC Science & Technology

1985-08-01

Interpreter Working with Infinite Terms," Technical Report FCT/UNL - 20/82, Faculdade de Ciencias e Tecnologia , November 1982. Quinta da Torre, 2825...x. y , z. For readability, we will use the symbols, + *, and * as binary infix operators. Examples of terms are f(x, a), / (x - 0), and y + 1. Given a...z 2. x . y = y ex. The integer operations of plus and times are only two of the many examples of associative and commutative functions about which we

Representation of DNA sequences with virtual potentials and their processing by (SEQREP) Kohonen self-organizing maps.

PubMed

Aires-de-Sousa, João; Aires-de-Sousa, Luisa

2003-01-01

We propose representing individual positions in DNA sequences by virtual potentials generated by other bases of the same sequence. This is a compact representation of the neighbourhood of a base. The distribution of the virtual potentials over the whole sequence can be used as a representation of the entire sequence (SEQREP code). It is a flexible code, with a length independent of the sequence size, does not require previous alignment, and is convenient for processing by neural networks or statistical techniques. To evaluate its biological significance, the SEQREP code was used for training Kohonen self-organizing maps (SOMs) in two applications: (a) detection of Alu sequences, and (b) classification of sequences encoding for HIV-1 envelope glycoprotein (env) into subtypes A-G. It was demonstrated that SOMs clustered sequences belonging to different classes into distinct regions. For independent test sets, very high rates of correct predictions were obtained (97% in the first application, 91% in the second). Possible areas of application of SEQREP codes include functional genomics, phylogenetic analysis, detection of repetitions, database retrieval, and automatic alignment. Software for representing sequences by SEQREP code, and for training Kohonen SOMs is made freely available from http://www.dq.fct.unl.pt/qoa/jas/seqrep. Supplementary material is available at http://www.dq.fct.unl.pt/qoa/jas/seqrep/bioinf2002

Precise K-Ar, 40Ar/39Ar, Rb-Sr and U/Pb mineral ages from the 27.5 Ma fish canyon tuff reference standard

USGS Publications Warehouse

Lanphere, M.A.; Baadsgaard, H.

2001-01-01

The accuracy of ages measured using the 40Ar/39Ar technique is affected by uncertainties in the age of radiation fluence-monitor minerals. At present, there is lack of agreement about the ages of certain minerals used as fluence monitors. The accuracy of the age of a standard may be improved if the age can be measured using different decay schemes. This has been done by measuring ages on minerals from the Oligocene Fish Canyon Tuff (FCT) using the K-Ar, 40Ar/39Ar. Rb-Sr and U/Pb methods. K-Ar and 40Ar/39Ar total fusion ages of sanidine, biotite and hornblende yielded a mean age of 27.57 ?? 0.36 Ma. The weighted mean 40Ar/39Ar plateau age of sanidine and biotite is 27.57 ?? 0.18 Ma. A biotite-feldspar Rb-Sr isochron yielded an age of 27.44 ?? 0.16 Ma. The U-Pb data for zircon are complex because of the presence of Precambrian zircons and inheritance of radiogenic Pb. Zircons with 207Pb/235U < 0.4 yielded a discordia line with a lower concordia intercept of 27.52 ?? 0.09 Ma. Evaluation of the combined data suggests that the best age for FCT is 27.51 Ma. Published by Elsevier Science B.V.

Autonomous Mission Operations

NASA Technical Reports Server (NTRS)

Frank, Jeremy; Spirkovska, Lilijana; McCann, Rob; Wang, Lui; Pohlkamp, Kara; Morin, Lee

2012-01-01

NASA's Advanced Exploration Systems Autonomous Mission Operations (AMO) project conducted an empirical investigation of the impact of time-delay on todays mission operations, and of the effect of processes and mission support tools designed to mitigate time-delay related impacts. Mission operation scenarios were designed for NASA's Deep Space Habitat (DSH), an analog spacecraft habitat, covering a range of activities including nominal objectives, DSH system failures, and crew medical emergencies. The scenarios were simulated at time-delay values representative of Lunar (1.2-5 sec), Near Earth Object (NEO) (50 sec) and Mars (300 sec) missions. Each combination of operational scenario and time-delay was tested in a Baseline configuration, designed to reflect present-day operations of the International Space Station, and a Mitigation configuration in which a variety of software tools, information displays, and crew-ground communications protocols were employed to assist both crews and Flight Control Team (FCT) members with the long-delay conditions. Preliminary findings indicate: 1) Workload of both crew members and FCT members generally increased along with increasing time delay. 2) Advanced procedure execution viewers, caution and warning tools, and communications protocols such as text messaging decreased the workload of both flight controllers and crew, and decreased the difficulty of coordinating activities. 3) Whereas crew workload ratings increased between 50 sec and 300 sec of time-delay in the Baseline configuration, workload ratings decreased (or remained flat) in the Mitigation configuration.

Electrical characteristics for Sn-Ag-Cu solder bump with Ti/Ni/Cu under-bump metallization after temperature cycling tests

NASA Astrophysics Data System (ADS)

Shih, T. I.; Lin, Y. C.; Duh, J. G.; Hsu, Tom

2006-10-01

Lead-free solder bumps have been widely used in current flip-chip technology (FCT) due to environmental issues. Solder joints after temperature cycling tests were employed to investigate the interfacial reaction between the Ti/Ni/Cu under-bump metallization and Sn-Ag-Cu solders. The interfacial morphology and quantitative analysis of the intermetallic compounds (IMCs) were obtained by electron probe microanalysis (EPMA) and field emission electron probe microanalysis (FE-EPMA). Various types of IMCs such as (Cu1-x,Agx)6Sn5, (Cu1-y,Agy)3Sn, and (Ag1-z,Cuz)3Sn were observed. In addition to conventional I-V measurements by a special sample preparation technique, a scanning electron microscope (SEM) internal probing system was introduced to evaluate the electrical characteristics in the IMCs after various test conditions. The electrical data would be correlated to microstructural evolution due to the interfacial reaction between the solder and under-bump metallurgy (UBM). This study demonstrated the successful employment of an internal nanoprobing approach, which would help further understanding of the electrical behavior within an IMC layer in the solder/UBM assembly.

The Cultural Resources Investigation of the Wild Rice River - South Branch and Felton Ditch Flood Control Project Area, Clay and Norman Counties, Minnesota,

DTIC Science & Technology

1980-01-01

1979. Principal Investigator: An Archaeological Investigation of the Proposed Lagoon Site, Dam Site Recreation Area, Coralville Lake, ! Iowa River, Iowa ...Proposed Lagoon Site, Coralville Lake, Iowa . Winter, 1979. I Analysis of Material from the Site Survey of Blue Earth City Park, Faribault County...t Site Recreation Area, Coralville Lake, Iowa . With Richard A. Strachan. For the Rock Island DsrFct, U. S. Acmy Corps of Engineers. With Richard A

Flat-ramp vs. convex-concave thrust geometries in a deformable hanging wall: new insights from analogue modeling experiments

NASA Astrophysics Data System (ADS)

Almeida, Pedro; Tomas, Ricardo; Rosas, Filipe; Duarte, Joao; Terrinha, Pedro

2015-04-01

Different modes of strain accommodation affecting a deformable hanging-wall in a flat-ramp-flat thrust system were previously addressed through several (sandbox) analog modeling studies, focusing on the influence of different variables, such as: a) thrust ramp dip angle and friction (Bonini et al, 2000); b) prescribed thickness of the hanging-wall (Koy and Maillot, 2007); and c) sin-thrust erosion (compensating for topographic thrust edification, e.g. Persson and Sokoutis, 2002). In the present work we reproduce the same experimental procedure to investigate the influence of two different parameters on hanging-wall deformation: 1) the geometry of the thrusting surface; and 2) the absence of a velocity discontinuity (VD) that is always present in previous similar analogue modeling studies. Considering the first variable we use two end member ramp geometries, flat-ramp-flat and convex-concave, to understand the control exerted by the abrupt ramp edges in the hanging-wall stress-strain distribution, comparing the obtain results with the situation in which such edge singularities are absent (convex-concave thrust ramp). Considering the second investigated parameter, our motivation was the recognition that the VD found in the different analogue modeling settings simply does not exist in nature, despite the fact that it has a major influence on strain accommodation in the deformable hanging-wall. We thus eliminate such apparatus artifact from our models and compare the obtained results with the previous ones. Our preliminary results suggest that both investigated variables play a non-negligible role on the structural style characterizing the hanging-wall deformation of convergent tectonic settings were such thrust-ramp systems were recognized. Acknowledgments This work was sponsored by the Fundação para a Ciência e a Tecnologia (FCT) through project MODELINK EXPL/GEO-GEO/0714/2013. Pedro Almeida wants to thank to FCT for the Ph.D. grant (SFRH/BD/52556/2014) under the Doctoral Program EarthSystems in IDL/UL. References Bonini, M., Sokoutis, D., Mulugeta, G., Katrivanos, E. (2000) - Modelling hanging wall accommodation above rigid thrust ramps. Journal of Structural Geology, 22, pp. 1165-1179. Persson, K. & Sokoutis, D (2002) - Analogue models of orogenic wedges controlled by erosion. Tectonophysics, 356, pp. 323- 336. Koy, H. & Bertrand, M. (2007) - Tectonic thickening of hanging-wall units over a ramp.Journal of Structural Geology, 29, pp. 924-932.

HCP to FCT + precipitate transformations in lamellar gamma-titanium aluminide alloys

NASA Astrophysics Data System (ADS)

Karadge, Mallikarjun Baburao

Fully lamellar gamma-TiAl [alpha2(HCP) + gamma(FCT)] based alloys are potential structural materials for aerospace engine applications. Lamellar structure stabilization and additional strengthening mechanisms are major issues in the ongoing development of titanium aluminides due to the microstructural instability resulting from decomposition of the strengthening alpha 2 phase. This work addresses characterization of multi-component TiAl systems to identify the mechanism of lamellar structure refinement and assess the effects of light element additions (C and Si) on creep deformation behavior. Transmission electron microscopy studies directly confirmed for the first time that, fine lamellar structure is formed by the nucleation and growth of a large number of basal stacking faults on the 1/6<112¯0> dislocations cross slipping repeatedly into and out of basal planes. This lamellar structure can be tailored by modifying jog heights through chemistry and thermal processing. alpha 2 → gamma transformation during heating (investigated by differential scanning calorimetry and X-ray diffraction) is a two step process involving the formation of a novel disordered FCC gamma' TiAl [with a(gamma') = c(gamma)] as an intermediate phase followed by ordering. Addition of carbon and silicon induced Ti2AlC H-type carbide precipitation inside the alpha2 lath and Ti 5(Al,Si)3 zeta-type silicide precipitation at the alpha 2/gamma interface. The H-carbides preserve alpha2/gamma type interfaces, while zeta-silicide precipitates restrict ledge growth and interfacial sliding enabling strong resistance to creep deformation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Soelberg, Nicholas Ray; Watson, Tony Leroy

Deep-bed methyl iodide adsorption testing has continued in Fiscal Year 2016 under the Department of Energy (DOE) Fuel Cycle Technology (FCT) Program Offgas Sigma Team to further research and advance the technical maturity of solid sorbents for capturing iodine-129 in off-gas streams during used nuclear fuel reprocessing. Adsorption testing with higher levels of NO (approximately 3,300 ppm) and NO2 (up to about 10,000 ppm) indicate that high efficiency iodine capture by silver aerogel remains possible. Maximum iodine decontamination factors (DFs, or the ratio of iodine flowrate in the sorbent bed inlet gas compared to the iodine flowrate in the outletmore » gas) exceeded 3,000 until bed breakthrough rapidly decreased the DF levels to as low as about 2, when the adsorption capability was near depletion. After breakthrough, nearly all of the uncaptured iodine that remains in the bed outlet gas stream is no longer in the form of the original methyl iodide. The methyl iodide molecules are cleaved in the sorbent bed, even after iodine adsorption is no longer efficient, so that uncaptured iodine is in the form of iodine species soluble in caustic scrubber solutions, and detected and reported here as diatomic I2. The mass transfer zone depths were estimated at 8 inches, somewhat deeper than the 2-5 inch range estimated for both silver aerogels and silver zeolites in prior deep-bed tests, which had lower NOx levels. The maximum iodine adsorption capacity and silver utilization for these higher NOx tests, at about 5-15% of the original sorbent mass, and about 12-35% of the total silver, respectively, were lower than for trends from prior silver aerogel and silver zeolite tests with lower NOx levels. Additional deep-bed testing and analyses are recommended to expand the database for organic iodide adsorption and increase the technical maturity if iodine adsorption processes.« less

Assessing SaTScan ability to detect space-time clusters in wildfires

NASA Astrophysics Data System (ADS)

Costa, Ricardo; Pereira, Mário; Caramelo, Liliana; Vega Orozco, Carmen; Kanevski, Mikhail

2013-04-01

Besides classical cluster analysis techniques which are able to analyse spatial and temporal data, SaTScan software analyses space-time data using the spatial, temporal or space-time scan statistics. This software requires the spatial coordinates of the fire, but since in the Rural Fire Portuguese Database (PRFD) (Pereira et al, 2011) the location of each fire is the parish where the ignition occurs, the fire spatial coordinates were considered as coordinates of the centroid of the parishes. Moreover, in general, the northern region is characterized by a large number of small parishes while the southern comprises parish much larger. The objectives of this study are: (i) to test the ability of SaTScan to detect the correct space-time clusters, in what respects to spatial and temporal location and size; and, (ii) to evaluate the effect of the dimensions of the parishes and of aggregating all fires occurred in a parish in a single point. Results obtained with a synthetic database where clusters were artificially created with different densities, in different regions of the country and with different sizes and durations, allow to conclude: the ability of SaTScan to correctly identify the clusters (location, shape and spatial and temporal dimension); and objectively assess the influence of the size of the parishes and windows used in space-time detection. Pereira, M. G., Malamud, B. D., Trigo, R. M., and Alves, P. I.: The history and characteristics of the 1980-2005 Portuguese rural fire database, Nat. Hazards Earth Syst. Sci., 11, 3343-3358, doi:10.5194/nhess-11-3343-2011, 2011 This work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project FCOMP-01-0124-FEDER-022692, the project FLAIR (PTDC/AAC-AMB/104702/2008) and the EU 7th Framework Program through FUME (contract number 243888).

[Morphologic and AFLP analysis of relationships between tulip species Tulipa biebersteiniana (Liliaceae)].

PubMed

Kutlunina, N A; Polezhaeva, M A; Permiakova, M V

2013-04-01

In populations of four species of tulips, (Tulipa biebersteiniana, T. patens, T. scytica and T. riparia) from the Volgograd, Kurgansk, Orenburg, and Chelyabinsk regions and the Republic of Bashkortostan, genetic diversity was studied by means of morphological and AFLP analysis. A morphological analysis of seven quantitative and two qualitative criteria was carried out. Three selective EcoRI/MseI primer pairs allowed one to genotype 81 individuals from 13 tulip populations with 87 loci. The low level of variability by AFLP loci were revealed in all species, including T. biebersteiniana (P = 20.41%, UH(e) = 0.075), T. patens (26.97%, 0.082), T. scytica (27.53%, 0.086), and T. riparia (27.72%, 0.096). According to the AMOVA results, the variability proportion that characterizes the differences between the four Tulip species was lower (F(CT) = 0.235) than between populations within species (F(ST) = 0.439). Tulipa patens is well differentiated by means of Nei's distances, coordination, and analysis in the STRUCTURE program. An analysis in the STRUCTURE revealed four genetic groups of tulips that are not completely in accordance with the analyzed species. This acknowledges the presence of complicated genetic process in the tulip population.

Investigation of the hysteresis phenomena in steady shock reflection using kinetic and continuum methods

NASA Astrophysics Data System (ADS)

Ivanov, M.; Zeitoun, D.; Vuillon, J.; Gimelshein, S.; Markelov, G.

1996-05-01

The problem of transition of planar shock waves over straight wedges in steady flows from regular to Mach reflection and back was numerically studied by the DSMC method for solving the Boltzmann equation and finite difference method with FCT algorithm for solving the Euler equations. It is shown that the transition from regular to Mach reflection takes place in accordance with detachment criterion while the opposite transition occurs at smaller angles. The hysteresis effect was observed at increasing and decreasing shock wave angle.

Analysis of Heliport Environmental Data: Indianapolis Downtown Heliport Wall Street Heliport. Volume 2. Wall Street Heliport Data Plots

DTIC Science & Technology

1989-05-01

r--S is. WATER FLIGHT CODE A T ION DATA FROCE.SFD 51 !4E FAA ’FCtINICAL CF.N!FR AfLAV’IC CITY AP0 N1 08403 D SPEED F WIND SPEED IS 10 𔃻iP1. OR...08,35 DEEC INDICATE WIND SPEED IN S NG OCCURS IF WIND SPEED IS 10 IlPt. OR GREATER IND S. ING INDICATES WIND SPEED A YORK WALL ST. DR HELIPORT CALM IiI G

Erratum: Attenuation measurements show that the presence of a TachoSil surgical patch will not compromise target irradiation in intra-operative electron radiation therapy or high-dose-rate brachytherapy.

PubMed

Sarmento, Sandra; Costa, Filipa; Pereira, Alexandre; Lencart, Joana; Dias, Anabela; Cunha, Luís; Sousa, Olga; Silva, José Pedro; Santos, Lúcio

2015-12-15

After publication of this study [1], the authors noticed that the funding was incorrectly acknowledged. The correct Acknowledgements section can be found below: “This work was partly funded by Fundação para a Ciência e Tecnologia (FCT), in the framework of the project PTDC/SAU-ENB/117631/2010, which is cofinanced by FEDER, through Programa Operacional Fatores de Competitividade - COMPETE of QREN (reference FCOMP-01-0124-FEDER-021141).”

Synthesis and characterization of CoPt nanoparticles prepared by room temperature chemical reduction with PAMAM dendrimer as template.

PubMed

Wan, Haiying; Shi, Shifan; Bai, Litao; Shamsuzzoha, Mohammad; Harrell, J W; Street, Shane C

2010-08-01

We describe an approach to synthesize monodisperse CoPt nanoparticles with dendrimer as template by a simple chemical reduction method in aqueous solution using NaBH4 as reducing agent at room temperature. The as-made CoPt nanoparticles buried in the dendrimer matrix have the chemically disordered fcc structure and can be transformed to the fct phase after annealing at 700 degrees C. This is the first report of dendrimer-mediated room temperature synthesis of monodisperse magnetic nanoparticles in aqueous solution.

St. Paul Harbor, St. Paul Island, Alaska; Design for Wave and Shoaling Protection; Hydraulic Model Investigation

DTIC Science & Technology

1988-09-01

S P a .E REPORT DOCUMENTATION PAGE OMR;oJ ’ , CRR Eo Dale n2 ;R6 ’a 4EPOR- SCRFT CASS F.C.T ON ’b RES’RICTI’,E MARKINGS Unclassified a ECRIT y...and selection of test waves 30. Measured prototype wave data on which a comprehensive statistical analysis of wave conditions could be based were...Tests Existing conditions 32. Prior to testing of the various improvement plans, comprehensive tests were conducted for existing conditions (Plate 1

A Comparative Study of Three Different Chemical Vapor Deposition Techniques of Carbon Nanotube Growth on Diamond Films

DTIC Science & Technology

2013-01-01

catalyst thermal CVD (FCT-CVD) with xylene and ferrocene liquid mixture without any prior catalyst deposition. T-CVD is a low-cost system that can... ferrocene is used as an iron source to promoteCNT growth. Based on these repeatable results, the CNT growth parameters were used to grow CNTs on the...temperature furnace is ramped up to the growth temperature of 750∘C. Ferrocene was dissolved into a xylene solvent in a 0.008 : 1molar volume ratio.The xylene

Parents' anxiety and depression symptoms after successful infertility treatment and spontaneous conception: does singleton/twin pregnancy matter?

PubMed

Tendais, I; Figueiredo, B

2016-10-01

Does mode of conception [spontaneous/after infertility treatment (IT)], type of pregnancy (singleton/twin) and parent gender have an effect on anxiety and depression levels and trajectories during pregnancy and the post-partum period? Conception after IT was associated with a transitory increase in anxiety during the perinatal period for parents of singletons, while for IT parents of twins higher levels of psychopathological symptoms tended to persist during pregnancy and the post-partum period. Most previous studies have shown that successful IT is not associated with poor psychological well-being during pregnancy and the post-partum period, but there is also some evidence for heightened pregnancy-related anxiety, lower self-esteem and lower self-efficacy. Parents of twins experience increased postnatal anxiety and depression. This prospective longitudinal study assessed 267 couples (N = 534) at each trimester of pregnancy, after childbirth and at 3 months post-partum. The sample comprised 36 couples who had conceived after IT (19 twin pairs and 17 singletons) and 231 couples who had conceived spontaneously (SC; 28 twin pairs and 203 singletons). Couples were recruited at four public hospitals in Portugal, and self-report measures of anxiety and depression symptoms were administered. IT parents reported higher anxiety after childbirth than parents who SC, regardless of pregnancy type. IT parents of twins showed higher anxiety at mid-pregnancy, as well as higher anxiety and depression at 3 months post-partum than IT parents of singletons. Among IT mothers, those who had twins exhibited higher depression after childbirth than those who had singletons. Differences according to mode of conception, pregnancy type and parents gender over time were also noted. During pregnancy, IT parents of twins showed no significant change in depression scores, while the other groups depression scores statistically significantly decreased over time. From pregnancy to the post-partum period, (i) IT parents showed an increase in anxiety scores, whereas SC parents exhibited no changes in anxiety scores; (ii) IT women exhibited an increase in depression scores, while SC women depression scores decreased. During the post-partum period, IT and SC parents of twins showed no changes in anxiety scores, while IT and SC parents of singletons anxiety scores declined. Due to the small number of IT couples, the interpretation and generalization of the results should be done with caution. The adverse impact of IT on psychopathological symptoms depends mostly on time and type of pregnancy, and is greater for twin pregnancies. These findings are important for tailoring interventions that address parents' specific needs at different moments. This work was supported by a grant (SFRH/BD/40146/2007) to the first author from the FCT, Foundation for Science and Technology (Portuguese Ministry of Education and Science), by the Operational Program Science and Innovation 2010 (POCI 2010) of the Community Support Board III, by FEDER Funds through the Operational Competitiveness Programme, COMPETE, and through national funding from the FCT under the projects: POCI/SAU-ESP/ 56397/2004 and PTDC/SAU/SAP/116738/2010. The authors have no conflicts of interest. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Bond Coat Engineering Influence on the Evolution of the Microstructure, Bond Strength, and Failure of TBCs Subjected to Thermal Cycling

NASA Astrophysics Data System (ADS)

Lima, R. S.; Nagy, D.; Marple, B. R.

2015-01-01

Different types of thermal spray systems, including HVOF (JP5000 and DJ2600-hybrid), APS (F4-MB and Axial III), and LPPS (Oerlikon Metco system) were employed to spray CoNiCrAlY bond coats (BCs) onto Inconel 625 substrates. The chemical composition of the BC powder was the same in all cases; however, the particle size distribution of the powder employed with each torch was that specifically recommended for the torch. For optimization purposes, these BCs were screened based on initial evaluations of roughness, porosity, residual stress, relative oxidation, and isothermal TGO growth. A single type of standard YSZ top coat was deposited via APS (F4MB) on all the optimized BCs. The TBCs were thermally cycled by employing a furnace cycle test (FCT) (1080 °C-1 h—followed by forced air cooling). Samples were submitted to 10, 100, 400, and 1400 cycles as well as being cycled to failure. The behavior of the microstructures, bond strength values (ASTM 633), and the TGO evolution of these TBCs, were investigated for the as-sprayed and thermally cycled samples. During FCT, the TBCs found to be both the best and poorest performing and had their BCs deposited via HVOF. The results showed that engineering low-oxidized BCs does not necessarily lead to an optimal TBC performance. Moreover, the bond strength values decrease significantly only when the TBC is about to fail (top coat spall off) and the as-sprayed bond strength values cannot be used as an indicator of TBC performance.

Integration of data-driven and physically-based methods to assess shallow landslides susceptibility

NASA Astrophysics Data System (ADS)

Lajas, Sara; Oliveira, Sérgio C.; Zêzere, José Luis

2016-04-01

Approaches used to assess shallow landslides susceptibility at the basin scale are conceptually different depending on the use of statistic or deterministic methods. The data-driven methods are sustained in the assumption that the same causes are likely to produce the same effects and for that reason a present/past landslide inventory and a dataset of factors assumed as predisposing factors are crucial for the landslide susceptibility assessment. The physically-based methods are based on a system controlled by physical laws and soil mechanics, where the forces which tend to promote movement are compared with forces that tend to promote resistance to movement. In this case, the evaluation of susceptibility is supported by the calculation of the Factor of safety (FoS), and dependent of the availability of detailed data related with the slope geometry and hydrological and geotechnical properties of the soils and rocks. Within this framework, this work aims to test two hypothesis: (i) although conceptually distinct and based on contrasting procedures, statistic and deterministic methods generate similar shallow landslides susceptibility results regarding the predictive capacity and spatial agreement; and (ii) the integration of the shallow landslides susceptibility maps obtained with data-driven and physically-based methods, for the same study area, generate a more reliable susceptibility model for shallow landslides occurrence. To evaluate these two hypotheses, we select the Information Value data-driven method and the physically-based Infinite Slope model to evaluate shallow landslides in the study area of Monfalim and Louriceira basins (13.9 km2), which is located in the north of Lisbon region (Portugal). The landslide inventory is composed by 111 shallow landslides and was divide in two independent groups based on temporal criteria (age ≤ 1983 and age > 1983): (i) the modelling group (51 cases) was used to define the weights for each predisposing factor (lithology, land use, slope, aspect, curvature, topographic position index and the slope over area ratio) with the Information Value method and was used also to calibrate the strength parameters (cohesion and friction angle) of the different lithological units considered in the Infinity Slope model; and (ii) the validation group (60 cases) was used to independent validate and define the predictive capacity of the shallow landslides susceptibility maps produced with the Information Value method and the Infinite Slope method. The comparison of both landslide susceptibility maps was supported by: (i) the computation of the Receiver Operator Characteristic (ROC) curves; (ii) the calculation of the Area Under the Curve (AUC); and (iii) the evaluation of the spatial agreement between the landslide susceptibility classes. Finally, the susceptibility maps produced with the Information Value and the Infinite Slope methods are integrated into a single landslide susceptibility map based on a set of integration rules define by cross-validation of the susceptibility classes of both maps and analysis of the corresponding contingency table. This work was supported by the FCT - Portuguese Foundation for Science and Technology and is within the framework of the FORLAND Project. Sérgio Oliveira was funded by a postdoctoral grant (SFRH/BPD/85827/2012) from the Portuguese Foundation for Science and Technology (FCT).

Transaction Design Specification Medical Exam Databases System (MED) update Transaction

DTIC Science & Technology

1986-12-01

8217RECOFD IN 51) 73. CORONARY SFAS1 SITE ;CHAR X(6) IN 7:) 74* CORONARY FLAQUES (RECO D IN 51) 75. CCFONARY PLAOUE 3ITE ,CHAR K(60 IN 74) 76* FCT DIAMETER...KETOSTEROIDS YE HYDROXYCARTICOSTEROIDS YO 24 HR URINE TOTAL VOLUME MA URINE OSMOLALITY MB SERUM OSMOLALITY MC 24HR URINE TOTAL VOLUME ZE SERUM COPPER FBS TO...RHEUMATOID FACTOR PA N P -2 2 ANTINUCLEAR ANTIBODY PB N P -2 2 0 FREE FATTY ACIDS QA 5 9 57 200 MG% SERUM COPPER RA 30 70 130 300 JG% URINE COPPER RBM 10 30 90

Relating precipitation to fronts at a sub-daily basis

NASA Astrophysics Data System (ADS)

Hénin, Riccardo; Ramos, Alexandre M.; Liberato, Margarida L. R.; Gouveia, Célia

2017-04-01

High impact events over Western Iberia include precipitation extremes that are cause for concern as they lead to flooding, landslides, extensive property damage and human casualties. These events are usually associated with low pressure systems over the North Atlantic moving eastward towards the European western coasts (Liberato and Trigo, 2014). A method to detect fronts and to associate amounts of precipitation to each front is tested, distinguishing between warm and cold fronts. The 6-hourly ERA-interim 1979-2012 reanalysis with 1°x1° horizontal resolution is used for the purpose. An objective front identification method (the Thermal Method described in Shemm et al., 2014) is applied to locate fronts all over the Northern Hemisphere considering the equivalent potential temperature as thermal parameter to use in the model. On the other hand, we settled a squared search box of tuneable dimension (from 2 to 10 degrees long) to look for a front in the neighbourhood of a grid point affected by precipitation. A sensitivity analysis is performed and the optimal dimension of the box is assessed in order to avoid over(under) estimation of precipitation. This is performed in the light of the variability and typical dynamics of warm/cold frontal systems in the Western Europe region. Afterwards, using the extreme event ranking over Iberia proposed by Ramos et al. (2014) the first ranked extreme events are selected in order to validate the method with specific case studies. Finally, climatological and trend maps of frontal activity are produced both on annual and seasonal scales. Trend maps show a decrease of frontal precipitation over north-western Europe and a slight increase over south-western Europe, mainly due to warm fronts. REFERENCES Liberato M.L.R. and R.M. Trigo (2014) Extreme precipitation events and related impacts in Western Iberia. Hydrology in a Changing World: Environmental and Human Dimensions. IAHS Red Book No 363, 171-176. ISSN: 0144-7815. Ramos A.M., R.M. Trigo and M.L.R. Liberato (2014) A ranking of high-resolution daily precipitation extreme events for the Iberian Peninsula, Atmospheric Science Letters 15, 328 - 334. doi: 10.1002/asl2.507. Shemm S., I. Rudeva and I. Simmonds (2014) Extratropical fronts in the lower troposphere - global perspectives obtained from two automated methods. Quarterly Journal of the Royal Meteorological Society, 141: 1686-1698, doi: 10.1002/qj.2471. ACKNOWLEDGEMENTS This work is supported by FCT - project UID/GEO/50019/2013 - Instituto Dom Luiz. Fundação para a Ciência e a Tecnologia, Portugal (FCT) is also providing for R. Hénin doctoral grant (PD/BD/114479/2016) and A.M. Ramos postdoctoral grant (FCT/DFRH/SFRH/BPD/84328/2012).

Exploring the Cigala/calibra Network Data Base for Ionosphere Monitoring Over Brazil

NASA Astrophysics Data System (ADS)

Vani, B. C.; Galera Monico, J. F.; Shimabukuro, M. H.; Pereira, V. A.; Aquino, M. H.

2013-12-01

The ionosphere in Brazil is strongly influenced by the equatorial anomaly, therefore GNSS based applications are widely affected by ionospheric disturbances. A network for continuous monitoring of the ionosphere has been deployed over its territory since February/2011, as part of the CIGALA and CALIBRA projects. Through CIGALA (Concept for Ionospheric Scintillation Mitigation for Professional GNSS in Latin America), which was funded by European Commission (EC) in the framework of the FP7-GALILEO-2009-GSA (European GNSS Agency), the first stations were deployed at Presidente Prudente, São Paulo state, in February 2011. CIGALA was finalized in February 2012 with eight stations distributed over the Brazilian territory. Through CALIBRA (Countering GNSS high Accuracy applications Limitations due to Ionospheric disturbances in BRAzil), which is also funded by the European Commission now in the framework of the FP7-GALILEO-2011-GSA, new stations are being deployed. Some of the stations are being specifically placed according to geomagnetic considerations aiming to support the development of a local scintillation and TEC model. CALIBRA started in November 2012 and will have two years of duration, focusing on the development of improved and new algorithms that can be applied to high accuracy GNSS techniques in order to tackle the effects of ionospheric disturbances. PolarRxS-PRO receivers, manufactured by Septentrio, have been deployed at all stations This multi-GNSS receiver can collect data at rates of up to 100 Hz, providing ionospheric TEC, scintillation parameters like S4 and Sigma-Phi, and other signal metrics like locktime for all satellites and frequencies tracked. All collected data (raw and ionosphere monitoring records) is stored at a central facility located at the Faculdade de Ciências e Tecnologia da Universidade Estadual Paulista (FCT/UNESP) in Presidente Prudente. To deal with the large amount of data, an analysis infrastructure has also been established in the form of a web based software named ISMR Query Tool, which provides a capability to identify specific behaviors of ionospheric activity through data visualization and data mining. Its web availability and user-specified features allow the users to interact with the data through a simple internet connection, enabling to obtain insight about the ionosphere according with their own previous knowledge. Information about the network, the projects and the tool can be found at the FCT/UNESP Ionosphere web portal available at http://is-cigala-calibra.fct.unesp.br/. This contribution will provide an overview of results extracted using the monitoring and analysis infrastructure, explaining the possibilities offered by the ISMR Query Tool to support analysis of the ionosphere as well as the development of models and mitigation techniques to counter the effects of ionospheric disturbances on GNSS.

Macular Atrophy in Neovascular Age-Related Macular Degeneration with Monthly versus Treat-and-Extend Ranibizumab: Findings from the TREX-AMD Trial.

PubMed

Abdelfattah, Nizar S; Al-Sheikh, Mayss; Pitetta, Sean; Mousa, Ahmed; Sadda, SriniVas R; Wykoff, Charles C

2017-02-01

To compare the enlargement rate of macular atrophy (ERMA) in eyes treated with ranibizumab monthly or using a treat-and-extend (TREX) regimen for neovascular age-related macular degeneration (AMD) or fellow control eyes, as well as analyze risk factors for macular atrophy (MA) development and progression. Eighteen-month, multicenter, randomized, controlled clinical trial. Sixty patients with treatment-naïve neovascular AMD in 1 eye randomized 1:2 to monthly or TREX ranibizumab. Patients' study and fellow eyes were followed for 18 months using spectral-domain optical coherence tomography (SD OCT) and fundus autofluorescence (FAF) imaging. The MA was quantified on FAF images using Heidelberg Region Finder software (Heidelberg Engineering, Heidelberg, Germany), with suspected areas of atrophy confirmed by SD OCT and infrared reflectance imaging. For eyes without baseline MA yet developed MA by 18 months, intervening visits were assessed to determine the first visit at which MA appeared to define progression rates. Foveal choroidal thickness (FCT), subretinal hyperreflective material (SHRM), and pigment epithelial detachment (PED), were assessed at baseline to determine whether they influenced MA progression. Mean ERMA at 18 months. Relationship between visual acuity and MA, and the baseline risk factors for ERMA were also assessed. The final analysis cohort included 88 eyes in 3 groups: monthly (n = 19), TREX (n = 30), and control fellow eyes (n = 39). Mean ERMA over 18 months was 0.39±0.67 (monthly), 1.1±1.9 (TREX), and 0.49±1 mm 2 (control, P = 0.12). Mean ERMA per group among the 40.9% (n = 36) of baseline patients with MA was 0.9±1, 1.9±2.2, and 1±1.3 mm 2 , respectively (P = 0.31). The incidence rate of MA in the 3 groups was 40%, 0%, and 8.3%, respectively. Mann-Whitney U test revealed a statistically significant association between baseline FCT (127±46 vs. 155±55 μm, P = 0.01) and SHRM thickness (106±131 vs. 50±85 μm, P = 0.02) on MA. In eyes with no baseline MA, presence of SHRM, SHRM, and PED thickness, and presence of baseline hemorrhage were all significant predictors of new MA development (P = 0.04, 0.01, 0.04, 0.004, 0.01, respectively). Ranibizumab did not show a statistically significant influence on new MA development in eyes with neovascular AMD, whether dosed monthly or per TREX regimen. The FCT, SHRM thickness, and hemorrhage at baseline were all significant predictors of new MA. Copyright © 2016 American Academy of Ophthalmology. Published by Elsevier Inc. All rights reserved.

Post-weaning social and cognitive performance of piglets raised pre-weaning either in a complex multi-suckling group housing system or in a conventional system with a crated sow.

PubMed

van Nieuwamerongen, S E; Mendl, M; Held, S; Soede, N M; Bolhuis, J E

2017-09-01

We studied the social and cognitive performance of piglets raised pre-weaning either in a conventional system with a sow in a farrowing crate (FC) or in a multi-suckling (MS) system in which 5 sows and their piglets could interact in a more physically enriched and spacious environment. After weaning at 4 weeks of age, 8 groups of 4 litter-mates per pre-weaning housing treatment were studied under equal and enriched post-weaning housing conditions. From each pen, one pair consisting of a dominant and a submissive pig was selected, based on a feed competition test (FCT) 2 weeks post-weaning. This pair was used in an informed forager test (IFT) which measured aspects of spatial learning and foraging strategies in a competitive context. During individual training, submissive (informed) pigs learned to remember a bait location in a testing arena with 8 buckets (the same bucket was baited in a search visit and a subsequent relocation visit), whereas dominant (non-informed) pigs always found the bait in a random bucket (search visits only). After learning their task, the informed pigs' individual search visit was followed by a pairwise relocation visit in which they were accompanied by the non-informed pig. Effects of pre-weaning housing treatment were not distinctly present regarding the occurrence of aggression in the FCT and the learning performance during individual training in the IFT. During paired visits, informed and non-informed pigs changed their behaviour in response to being tested pairwise instead of individually, but MS and FC pigs showed few distinct behavioural differences.

Iodine intake by adult residents of a farming area in Iwate Prefecture, Japan, and the accuracy of estimated iodine intake calculated using the Standard Tables of Food Composition in Japan.

PubMed

Nakatsuka, Haruo; Chiba, Keiko; Watanabe, Takao; Sawatari, Hideyuki; Seki, Takako

2016-11-01

Iodine intake by adults in farming districts in Northeastern Japan was evaluated by two methods: (1) government-approved food composition tables based calculation and (2) instrumental measurement. The correlation between these two values and a regression model for the calibration of calculated values was presented. Iodine intake was calculated, using the values in the Japan Standard Tables of Food Composition (FCT), through the analysis of duplicate samples of complete 24-h food consumption for 90 adult subjects. In cases where the value for iodine content was not available in the FCT, it was assumed to be zero for that food item (calculated values). Iodine content was also measured by ICP-MS (measured values). Calculated and measured values rendered geometric means (GM) of 336 and 279 μg/day, respectively. There was no statistically significant (p > 0.05) difference between calculated and measured values. The correlation coefficient was 0.646 (p < 0.05). With this high correlation coefficient, a simple regression line can be applied to estimate measured value from calculated value. A survey of the literature suggests that the values in this study were similar to values that have been reported to date for Japan, and higher than those for other countries in Asia. Iodine intake of Japanese adults was 336 μg/day (GM, calculated) and 279 μg/day (GM, measured). Both values correlated so well, with a correlation coefficient of 0.646, that a regression model (Y = 130.8 + 1.9479X, where X and Y are measured and calculated values, respectively) could be used to calibrate calculated values.

Impact of area regeneration policies: performing integral interventions, changing opportunity structures and reducing health inequalities.

PubMed

Zapata Moya, Angel R; Navarro Yáñez, Clemente J

2017-03-01

Urban regeneration policies are area-based interventions addressing multidimensional problems. In this study, we analyse the impact of urban regeneration processes on the evolution of inequalities in mortality from certain causes. On the basis of Fundamental Cause Theory (FCT), our main hypothesis is that the impact of urban regeneration programmes will be more clearly observed on the causes of preventable deaths, as these programmes imply a direct or indirect improvement to a whole range of 'flexible resources' that residents in relevant areas have access to, and which ultimately may influence the inverse relationship between socioeconomic status and health. Using a quasi-experimental design and data from Longitudinal Statistics on Survival and Longevity of Andalusia (Spain), we analyse differences in the evolution of standard mortality ratios for preventable and less-preventable causes of premature death. This encompasses 59 neighbourhoods in 37 municipalities where urban regeneration projects were implemented in the last decade within the framework of three different programmes and in 59 counterparts where these policies were not implemented. As expected in line with FCT, there are no significant patterns in the evolution of internal differences in terms of less-preventable mortality. However, excessive preventable mortality strongly decreases in the neighbourhoods with intervention programmes, specifically in those where two or more projects were in force. This is even more apparent for women. The urban regeneration policies studied seem to contribute to reducing health inequity when the interventions are more integral in nature. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Headland sediment bypassing and beach rotation in a rocky coast: an example at the western Portuguese coast

NASA Astrophysics Data System (ADS)

Ribeiro, Mónica; Taborda, Rui; Lira, Cristina; Bizarro, Aurora; Oliveira, Anabela

2014-05-01

Headland sediment bypassing plays a major role in definition of coastal sedimentary budget and consequently in coastal management. This process is particularity important at headland-bay beaches on rocky coasts. However, headland-bay beach research is usually focused on the beach rotation since these beaches are generally regarded as closed systems. The sediment bypassing mechanisms have been extensively studied in the context of artificial structures (e.g. groins and jetties) but studies of natural headland sediment bypassing are scarce and usually applied to decadal time scales. This work aims to contribute to the understanding of headland sediment bypassing processes in non-artificial environments, taking as a case study a natural coastal stretch at the Portuguese west coast. The study is supported on the analysis of planform beach changes using Landsat satellite images (with an acquisition frequency of 16 days) complemented with field surveys with DGPS-RTK and ground-based photographic monitoring. The study area can be described as a cliffed rocky coast that accommodates a series of headland-bay beaches with different geometries: some are encased in the dependence of fluvial streams, while others correspond to a narrow and elongated thin sand strip that covers a rocky shore platform. This coast is generally characterized by a weak, but active, sediment supply and high levels of wave energy due to the exposure to the swells generated in the North Atlantic. The long-term stability of the beaches in conjunction with active sediment supply along the study area (from streams and cliff erosion) and a sink at the downdrift end of this coastal stretch (an active dune system) support the existence of headland sediment bypassing. The analysis of planform beach changes show a coherent signal in time but with a range that depends on the orientation of the stretch where each beach is included. In general, beaches displays a clockwise rotation during summer related to the NW (less energetic) incident wave conditions. The persistence of these conditions induces an enlargement of the beach downdrift (southward) and eventually sediment bypassing. This process can result in a continuous inner bar along the headland coast, which migrates downdrift in the surf zone and weld to the downdrift beach. The counter-clockwise rotation observed in the winter is more variable being in agreement with the less persistent W and SW incident wave conditions, suggesting that sediment bypassing occurs only southwards. The work was funded by FEDER funds through the Operational Programme for Competitiveness Factors - COMPETE and FCT National Funds - Portuguese Foundation for Science and Technology under the project Beach to Canyon Head Sedimentary Processes (PTDC/MAR/114674/2009). First author benefits from a PhD grant funded by FCT (SFRH/BD/79126/2011).

DEVELOPMENT OF EMERGING TECHNOLOGIES WITHIN THE SITE PROGRAM

EPA Science Inventory

The Site Program is formed by five research programs: the Demonstration Program, the Emerging Technology Program, the Measurement and Monitoring Technology Development Program, the Innovative Technology Program, and the Technology Transfer Program. The Emerging Technology (ET) P...

Tampering with the turbulent energy cascade with polymer additives

NASA Astrophysics Data System (ADS)

Valente, Pedro; da Silva, Carlos; Pinho, Fernando

2014-11-01

We show that the strong depletion of the viscous dissipation in homogeneous viscoelastic turbulence reported by previous authors does not necessarily imply a depletion of the turbulent energy cascade. However, for large polymer relaxation times there is an onset of a polymer-induced kinetic energy cascade which competes with the non-linear energy cascade leading to its depletion. Remarkably, the total energy cascade flux from both cascade mechanisms remains approximately the same fraction of the kinetic energy over the turnover time as the non-linear energy cascade flux in Newtonian turbulence. The authors acknowledge the funding from COMPETE, FEDER and FCT (Grant PTDC/EME-MFE/113589/2009).

A 2D-3D strategy for resolving tsunami-generated debris flow in urban environments

NASA Astrophysics Data System (ADS)

Birjukovs Canelas, Ricardo; Conde, Daniel; Garcia-Feal, Orlando; João Telhado, Maria; Ferreira, Rui M. L.

2017-04-01

The incorporation of solids, either sediment from the natural environment or remains from buildings or infrastructures is a relevant feature of tsunami run-up in urban environments, greatly increasing the destructive potential of tsunami propagation. Two-dimensional (2D) models have been used to assess the propagation of the bore, even in dense urban fronts. Computational advances are introduced in this work, namely a fully lagrangian, 3D description of the fluid-solid flow, coupled with a high performance meshless implementation capable of dealing with large domains and fine discretizations. A Smoothed Particle Hydrodynamics (SPH) Navier-Stokes discretization and a Distributed Contact Discrete Element Method (DCDEM) description of solid-solid interactions provide a state-of the-art fluid-solid flow description. Together with support for arbitrary geometries, centimetre scale resolution simulations of a city section in Lisbon downtown are presented. 2D results are used as boundary conditions for the 3D model, characterizing the incoming wave as it approaches the coast. It is shown that the incoming bore is able to mobilize and incorporate standing vehicles and other urban hardware. Such fully featured simulation provides explicit description of the interactions among fluid, floating debris (vehicles and urban furniture), the buildings and the pavement. The proposed model presents both an innovative research tool for the study of these flows and a powerful and robust approach to study, design and test mitigation solutions at the local scale. At the same time, due to the high time and space resolution of these methodologies, new questions are raised: scenario-building and initial configurations play a crucial role but they do not univocally determine the final configuration of the simulation, as the solution of the Navier-Stokes equations for high Reynolds numbers possesses a high number of degrees of freedom. This calls for conducting the simulations in a statistical framework, involving both initial conditions generation and interpretation of results, which is only attainable under very high standards of computational efficiency. This research as partially supported by Portuguese and European funds, within programs COMPETE2020 and PORL-FEDER, through project PTDC/ECM-HID/6387/2014 granted by the National Foundation for Science and Technology (FCT).

Hydrodynamics of concordant and discordant fixed bed open-channel confluences

NASA Astrophysics Data System (ADS)

Birjukova Canelas, Olga; Lage Ferreira, Rui Miguel; Heleno Cardoso, António

2017-04-01

The detailed characterization of the flow field in river confluences constitutes a relevant step towards the understanding of the hydro-morpho-dynamics of these key zones of the fluvial system. With a few exceptions, existing works on this topic covered concordant bed scenarios, meaning that both confluent channels had the same elevation. This laboratory study aims to contribute to a detailed three-dimensional characterization of the flow field at a fixed bed confluence, as well as to shed light on how bed elevation discordance modifies the flow patterns of the converging flows. While the junction angle and the discharge ratio were kept fixed, two scenarios were studied on the basis of detailed water level and 3D ADV measurements at the denser mesh ever. The internal flow structure of the concordant bed scenario mostly complied with the classical conceptual models. A relevant difference concerns the size of the stagnation zone, much smaller close to the bed of the discordant bed confluence. A more significant difference is a horizontal flow structure, not previously identified in the literature, characterized by strong streamwise mean vorticity and strong secondary motion. It is observed for the discordant bed case, occurring along the inner wall of the main channel and downstream the junction corner. This structure is spatially well-correlated to a pronounced imbalance of cross-stream and vertical normal Reynolds stresses. This highlights the role of Reynolds stress anisotropy (RSA) that is generated in the shear layers than accompany the entrance of the tributary flow. Since this structure is not present in the concordant case, where RSA is also evident, it is argued that convective effects should also play a role in its formation, presumably due to deflection of the flow in the main channel by the tributary. The newly identified secondary motion should, thus, be a combination of Prandtĺs second kind and Prandtĺs first kind of secondary flow. The relative importance of each generating mechanism is still under investigation. Acknowledgements This research as partially supported by Portuguese and European funds, within programs COMPETE2020 and PORL-FEDER, through project PTDC/ECM-HID/6387/2014 granted by the National Foundation for Science and Technology (FCT).

Resolved simulations of a granular-fluid flow through a check dam with a SPH-DCDEM model

NASA Astrophysics Data System (ADS)

Birjukovs Canelas, Ricardo; Domínguez, Jose; Crespo, Alejandro; Gómez-Gesteira, Moncho; Ferreira, Rui M. L.

2017-04-01

Debris flows represent some of the most relevant phenomena in geomorphological events. Due to the potential destructiveness of such flows, they are the target of a vast amount of research. Experimental research in laboratory facilities or in the field is fundamental to characterize the fundamental rheological properties of these flows and to provide insights on its structure. However, characterizing interparticle contacts and the structure of the motion of the granular phase is difficult, even in controlled laboratory conditions, and possible only for simple geometries. This work addresses the need for a numerical simulation tool applicable to granular-fluid mixtures featuring high spatial and temporal resolution, thus capable of resolving the motion of individual particles, including all interparticle contacts and susceptible to complement laboratory research. The DualSPHysics meshless numerical implementation based on Smoothed Particle Hydrodynamics (SPH) is expanded with a Distributed Contact Discrete Element Method (DCDEM) in order to explicitly solve the fluid and the solid phase. The specific objective is to test the SPH-DCDEM approach by comparing its results with experimental data. An experimental set-up for stony debris flows in a slit check dam is reproduced numerically, where solid material is introduced through a hopper assuring a constant solid discharge for the considered time interval. With each sediment particle possibly undergoing several simultaneous contacts, thousands of time-evolving interactions are efficiently treated due to the model's algorithmic structure and the HPC implementation of DualSPHysics. The results, comprising mainly of retention curves, are in good agreement with the measurements, correctly reproducing the changes in efficiency with slit spacing and density. The encouraging results, coupled with the prospect of so far unique insights into the internal dynamics of a debris flow show the potential of high-performance resolved approaches to the description of the flow and the study of its mitigation strategies. This research as partially supported by Portuguese and European funds, within programs COMPETE2020 and PORL-FEDER, through project PTDC/ECM-HID/6387/2014 granted by the National Foundation for Science and Technology (FCT).

The impacts of climate and land-use change scenarios on river ecology: the case of Margaritifera margaritifera

NASA Astrophysics Data System (ADS)

Santos, Regina; Fernandes, Luís; Varandas, Simone; Pereira, Mário; Sousa, Ronaldo; Teixeira, Amilcar; Lopes-Lima, Manuel; Cortes, Rui; Pacheco, Fernando

2015-04-01

Climate change is one of the most important causes of biodiversity loss in freshwater ecosystems and it is expected to cause extinctions in many species in the future. Freshwater ecosystems are also highly affected by anthropogenic pressures such as land use/land cover changes, water abstractions and impoundments. The aim of this study is to assess the impacts of future climate and land-use in the Beça River (northern Portugal) namely on the conservation status of the endangered pearl mussel Margaritifera margaritifera (Linnaeus, 1758). This is an environmental indicator and endangered species currently present in several stretches of the Beça River that still hold adequate ecological conditions. However, the species is threatened by the precipitation decrease projected for the 21st century and the deviation of a significant portion of the river water to an adjacent watershed (since 1998). This decrease in river water can be especially acute during the summer months, forming small pools dispersed along the water course where M. margaritifera, and its host (Salmo trutta), barely find biological conditions for survival. The materials and methods used in this study include; (i) the assessment of water quality based on minimum, maximum and average values of relevant physicochemical parameters within the period 2000-2009; (ii) assessment of future climate change settings based on air temperature and precipitation projected by Regional and Global Circulation Models for recent past (1961 - 1990) and future climate scenarios (2071 - 2099); (iii) data processing to remove the model biases; and, (iv) integrated watershed modelling with river-planning (Mike Basin) and broad GIS (ArcMap) computer packages. Our findings comprise: (i); a good relationship between current wildfire incidence and river water quality; (ii) an increase in the future air temperature throughout the year; (iii) increases in future precipitations during winter and decreases during the other seasons; (iv) major runoff decrease more likely to occur between April and June and in October (<-30% in both future scenarios) which may reach -50%; (v) a decrease in the simulated average water depth in most river sections leading to habitat fragmentation by loss of connectivity during the summer season (water depth < 10 cm) with reverberating effects on the mobility of Salmo trutta, which may impair the reproduction and recruitment of pearl mussels. In addition, human-related threats mostly associated with the presence of dams and wildfires are expected to increase in the future. The presence of dams contribute to an additional decrease in the connectivity and river flow while the forest fires are a major threat, related to the wash out of burned areas during storms, eventually causing the disappearance of the mussels, especially the juveniles. In view of future climate and land-use change scenarios, conservation strategies are proposed to maintain good status and enable recovery, including the negotiation of ecological flows with the river board authorities, the replanting of riparian vegetation along the water course and the reintroduction of native tree species throughout the catchment. This work was supported by national funds by FCT - Portuguese Foundation for Science and Technology, under the project PEst-OE/AGR/UI4033/2014 and by the project SUSTAINSYS: Environmental Sustainable Agro-Forestry Systems (NORTE-07-0124-FEDER-000044), financed by the North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework (QREN), through the European Regional Development Fund (FEDER), as well as by National Funds (PIDDAC) through the Portuguese Foundation for Science and Technology (FCT/MEC).

Influence of the input database in detecting fire space-time clusters

NASA Astrophysics Data System (ADS)

Pereira, Mário; Costa, Ricardo; Tonini, Marj; Vega Orozco, Carmen; Parente, Joana

2015-04-01

Fire incidence variability is influenced by local environmental variables such as topography, land use, vegetation and weather conditions. These induce a cluster pattern of the fire events distribution. The space-time permutation scan statistics (STPSS) method developed by Kulldorff et al. (2005) and implemented in the SaTScanTM software (http://www.satscan.org/) proves to be able to detect space-time clusters in many different fields, even when using incomplete and/or inaccurate input data. Nevertheless, the dependence of the STPSS method on the different characteristics of different datasets describing the same environmental phenomenon has not been studied yet. In this sense, the objective of this study is to assess the robustness of the STPSS for detecting real clusters using different input datasets and to justify the obtained results. This study takes advantage of the existence of two very different official fire datasets currently available for Portugal, both provided by the Institute for the Conservation of Nature and Forests. The first one is the aggregated Portuguese Rural Fire Database PRFD (Pereira et al., 2011), which is based on ground measurements and provides detailed information about the ignition and extinction date/time and the area burnt by each fire in forest, scrubs and agricultural areas. However, in the PRFD, the fire location of each fire is indicated by the name of smallest administrative unit (the parish) where the ignition occurred. Consequently, since the application of the STPSS requires the geographic coordinates of the events, the centroid of the parishes was considered. The second fire dataset is the national mapping burnt areas (NMBA), which is based on satellite measurements and delivered in shape file format. The NMBA provides a detailed spatial information (shape and size of each fire) but the temporal information is restricted to the year of occurrence. Besides these differences, the two datasets cover different periods, they comprises a quite different number of fire records and lower fire size threshold. Therefore, it was necessary to restrict both databases to a common period and fire size range. In addition, the weather conditions during the temporal dimension of the most important detected clusters were investigated since they are often very well correlated with the fire incidence. Composite analysis was used to identify and characterize the synoptic patterns of large scale climatic and dynamical meteorological fields at different levels of the atmosphere. Kulldorff, M., Heffernan, R., Hartman, J., Assunção, R., Mostashari, F., 2005. A Space-Time Permutation Scan Statistic for Disease Outbreak Detection. PLoS medicine. 2(3), 216-224. http://dx.doi.org/10.1371/journal.pmed.0020059. Pereira, M. G., Malamud, B. D., Trigo, R. M., and Alves, P. I., 2011. The history and characteristics of the 1980-2005 Portuguese rural fire database, Nat. Hazards Earth Syst. Sci., 11, 3343-3358, http://dx.doi.org/10.5194/nhess-11-3343-2011. This work was supported by national funds by FCT - Portuguese Foundation for Science and Technology, under the project PEst-OE/AGR/UI4033/2014 and by the project SUSTAINSYS: Environmental Sustainable Agro-Forestry Systems (NORTE-07-0124-FEDER-000044), financed by the North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework (QREN), through the European Regional Development Fund (FEDER), as well as by National Funds (PIDDAC) through the Portuguese Foundation for Science and Technology (FCT/MEC).

A decision support system for water supply in watersheds with recurrent wildfires

NASA Astrophysics Data System (ADS)

Santos, Regina; Fernandes, Luís; Pereira, Mário; Cortes, Rui; Pacheco, Fernando

2015-04-01

The Beça River basin (North of Portugal) is barely affected by anthropogenic pressures, namely by the harmful effects of industrialization, urbanization or intensive agriculture. However, this basin is subject to recurrent wildfires, which plays a major role on soil erosion and water quality deterioration. Wildfires are responsible for increasing the concentration of soil nitrogen (N) and phosphorous (P) that ultimately arise in the rivers and water reservoirs as a result of transport by rainfall. In this sense, the main aims of this study are threefold: (i) to assess the relationship between fire occurrence and P concentration in river water, (ii) to model the P and N concentrations in stream water at the basin and sub-basin scales, and (iii) to propose management guidelines for the protection of drinking water resources taking into account the local history on forest fires. This study includes morphological, hydrological and climatological characterization of the study area as well as the spatial-temporal distribution of the fire incidence in the basin. The rainfall-runoff and nutrient transport processes were performed respectively with Mike Hydro Basin and the ECO Lab. The data requirements for these analysis/tools includes: a digital elevation model, Corine Land Cover maps (for 1990, 2000 and 2006), cartography of burned areas (covering the period 1990 - 2013) and wildfire risk (assessed in 2011), daily records of temperature, precipitation and stream flow, measured at monitoring stations (during the 1990 - 2006 period). Obtained results reveals a maximum fire recurrence of 5 times during the study period (1990 - 2013) and robust exponential regression observed between burned area and wildfire risk (R2 > 0.9). The biophysical parameters contributes to 86% of the fire risk which suggest that burnt area in the Beça River basin is essentially triggered by natural causes. A total of 16,396 ha was burned between 1990 and 2013, corresponding to 47% of the basin area which was covered by scrubs (69%), forests (22%) and heterogeneous agricultural areas (9%). A close relationship was found between the concentration of phosphorus in river water and the occurrence of forest fires. The annual and monthly phosphorus concentrations are influenced by the burned area and the river flow discharge. However, the hydrologic conditions prevail in the sense that, for similar values of burnt area, the maximum phosphorous concentration is higher in dry than in wet years. In addition, the phosphorus concentrations in the water bodies exceeded the limits imposed by the National and European legislation for good ecological status, human consumption and multiple uses mostly in last years of the study period. The fire frequency is a key variable in the planning and management of water bodies within a fire-prone watershed. The impacts of wildfires on water quality may become periodical instead of occasional as a consequence of the reduced precipitation and increased fire frequency and intensity projected for the near future climate. This work was supported by national funds by FCT - Portuguese Foundation for Science and Technology, under the project PEst-OE/AGR/UI4033/2014 and by the project SUSTAINSYS: Environmental Sustainable Agro-Forestry Systems (NORTE-07-0124-FEDER-000044), financed by the North Portugal Regional Operational Programme (ON.2 - O Novo Norte), under the National Strategic Reference Framework (QREN), through the European Regional Development Fund (FEDER), as well as by National Funds (PIDDAC) through the Portuguese Foundation for Science and Technology (FCT/MEC).

Initiating the 2002 Mars Science Laboratory (MSL) Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.; Henderson, Rebecca

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to investigate the Martian environment and requires new capabilities that are currently are not available. The MSL Technology Program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by JPL and is divided into a Focused Program and a Base Program. The MSL Technology Program is under the focused program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology's requirements and the development process are tightly coordinated with the Project. The MSL Technology Program combines the proven management techniques of flight projects with the commercial technology management strategies of industry and academia, to create a technology management program that meets the short-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment. This paper also provides an update of the 2003 MSL technology program and examines some of the drivers that changed the program from its initiation.

Overview of Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2006-01-01

This viewgraph presentation reviews the development of a technology program leading to Mars missions. The presentation includes: the goals of technology program, elements of technology program, program metrics, major accomplishments, examples and Information about the Mars Technology Program.

Initiating the 2002 Mars Science Laboratory (MSL) Focused Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to deliver a new generation of rover safely to the surface of Mars and conduct comprehensive in situ investigations using a new generation of instruments. This system will be designed to land with precision and be capable of operating over a large percentage on the surface of Mars. It will have capabilities that will support NASA's scientific goals into the next decade of exphation. The MSL Technology program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by the Jet Propulsion Laboratory (JPL) and is divided into a Focused Program and a Base Program. The Focused Technology Program addresses technologies that are specific and critical to near-term missions, while the Base Technology Program addresses those technologies that are applicable to multiple missions and which can be characterized as longer term, higher risk, and high payoff technologies. The MSL Technology Program is under the Focused Program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology s requirements and the development process are tightly coordinated with the Project. The Technology Program combines proven management techniques of flight projects with commercial and academic technology management strategies, to create a technology management program that meets the near-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment.

Structures and Algorithms in Stochastic Realization Theory and the Smoothing Problem

DTIC Science & Technology

1980-01-01

w satisfying (2.2) and i. H(w) for all i) having y as its output is called a rezlization of y. Clearly, the components of x, y and w belong to H...FCt)x,(t) + B,(t)w,(t) ; x,(0) Z 0 y(t) a H(t)x,(t) + R,(t) w,(t) , which clearly belongs to S. It can be immediately seen that the co- variance... it is seen that the realization i,(t-) = P’(t)i,(t) + B,(t),(t) ; i,(T) - 0(90,) (2.37) )y(t) = G’(t)iCt) + 9,(t)hQ,(t) belongs to S. By Lemma 2.7

High-coercivity FePt nanoparticle assemblies embedded in silica thin films.

PubMed

Yan, Q; Purkayastha, A; Singh, A P; Li, H; Li, A; Ramanujan, R V; Ramanath, G

2009-01-14

The ability to process assemblies using thin film techniques in a scalable fashion would be a key to transmuting the assemblies into manufacturable devices. Here, we embed FePt nanoparticle assemblies into a silica thin film by sol-gel processing. Annealing the thin film composite at 650 degrees C transforms the chemically disordered fcc FePt phase into the fct phase, yielding magnetic coercivity values H(c)>630 mT. The positional order of the particles is retained due to the protection offered by the silica host. Such films with assemblies of high-coercivity magnetic particles are attractive for realizing new types of ultra-high-density data storage devices and magneto-composites.

Treatment of Escape-Maintained Challenging Behavior Using Chained Schedules: An Evaluation of the Effects of Thinning Positive plus Negative Reinforcement During Functional Communication Training.

PubMed

Zangrillo, Amanda N; Fisher, Wayne W; Greer, Brian D; Owen, Todd M; DeSouza, Andresa A

2016-01-01

Previous research has supported functional communication training (FCT) as an effective intervention for reducing challenging behavior. Clinicians often program schedule-thinning procedures to increase the portability of the treatment (i.e., reinforcement is provided less frequently). For individuals with escape-maintained problem behavior, chained schedules have proven effective in increasing task completion and supplemental procedures may ameliorate reemergence of challenging behavior as access to reinforcement is decreased. The present study compared the use of a chained schedule-thinning procedure with and without alternative reinforcement (e.g., toys and activities) embedded in an intervention in which escape from the task is provided contingent on a request for a break. Two individuals with escape-maintained challenging behavior participated. We compared two treatment conditions, escape-only and escape-to-tangibles, using a single-subject, alternating treatments design with each treatment implemented in a distinct academic context. With the escape-to-tangibles treatment, we reached the final schedule in both contexts with both participants (4 successes out of 4 applications). We did not reach the final schedule with either participant with the escape-only intervention (0 successes out of 2 applications). The current results provided preliminary confirmation that providing positive plus negative reinforcement would decrease destructive behavior, increase compliance, and facilitate reinforcer-schedule thinning.

Treatment of Escape-Maintained Challenging Behavior Using Chained Schedules: An Evaluation of the Effects of Thinning Positive plus Negative Reinforcement During Functional Communication Training

PubMed Central

Zangrillo, Amanda N.; Fisher, Wayne W.; Greer, Brian D.; Owen, Todd M.; DeSouza, Andresa A.

2016-01-01

Objective Previous research has supported functional communication training (FCT) as an effective intervention for reducing challenging behavior. Clinicians often program schedule-thinning procedures to increase the portability of the treatment (i.e., reinforcement is provided less frequently). For individuals with escape-maintained problem behavior, chained schedules have proven effective in increasing task completion and supplemental procedures may ameliorate reemergence of challenging behavior as access to reinforcement is decreased. The present study compared the use of a chained schedule-thinning procedure with and without alternative reinforcement (e.g., toys and activities) embedded in an intervention in which escape from the task is provided contingent on a request for a break. Method Two individuals with escape-maintained challenging behavior participated. We compared two treatment conditions, escape-only and escape-to-tangibles, using a single-subject, alternating treatments design with each treatment implemented in a distinct academic context. Results With the escape-to-tangibles treatment, we reached the final schedule in both contexts with both participants (4 successes out of 4 applications). We did not reach the final schedule with either participant with the escape-only intervention (0 successes out of 2 applications). Conclusion The current results provided preliminary confirmation that providing positive plus negative reinforcement would decrease destructive behavior, increase compliance, and facilitate reinforcer-schedule thinning. PMID:28626579

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Correlation of Microstructure and Mechanical Properties of Thermomechanically Processed Low-Carbon Steels Containing Boron and Copper

NASA Astrophysics Data System (ADS)

Hwang, Byoungchul; Lee, Chang Gil; Lee, Tae-Ho

2010-01-01

The correlation of the microstructure and mechanical properties of thermomechanically processed low-carbon steels containing B and Cu was investigated in this study. Eighteen kinds of steel specimens were fabricated by varying B and Cu contents and finish cooling temperatures (FCTs) after controlled rolling, and then tensile and Charpy impact tests were conducted on them. Continuous cooling transformation (CCT) diagrams of the B-free and B-added steel specimens under nondeformed and deformed conditions were constructed by a combination of deformation dilatometry and metallographic methods. The addition of a very small amount of B remarkably decreased the transformation start temperatures near a bainite start temperature (Bs) and thus expanded the formation region of low-temperature transformation phases such as degenerate upper bainite (DUB) and lower bainite (LB) to slower cooling rates. On the other hand, a deformation in the austenite region promoted the formation of quasipolygonal ferrite (QPF) and granular bainite (GB) with an increase in transformation start temperatures. The tensile test results indicated that tensile strength primarily increased with decreasing FCT, while the yield strength did not vary much, except in some specimens. The addition of B and Cu, however, increased the tensile and yield strengths simultaneously because of the significant microstructural change occasionally affected by the FCT. The Charpy impact test results indicated that the steel specimens predominantly composed of LB and lath martensite (LM) had lower upper-shelf energy (USE) than those consisting of GB or DUB, but had nearly equivalent or rather lower ductile-to-brittle transition temperature (DBTT) in spite of the increased strength. According to the electron backscatter diffraction (EBSD) analysis data, it was confirmed that LB and LM microstructures had a relatively smaller effective grain size than GB or DUB microstructures, which enhanced the tortuosity of cleavage crack propagation, thereby resulting in a decrease in DBTT.

Structure and magnetism of epitaxially strained Pd(001) films on Fe(001): Experiment and theory

NASA Astrophysics Data System (ADS)

Fullerton, Eric E.; Stoeffler, D.; Ounadjela, K.; Heinrich, B.; Celinski, Z.; Bland, J. A. C.

1995-03-01

We present an experimental and theoretical description of the structure and magnetism of epitaxially strained Pd(001) films on Fe(001) and in Fe/Pd/Fe(001) trilayers. The structure is determined by combining reflection high-energy electron diffraction and x-ray diffraction. For Fe/Au(001) bilayers and Fe/Pd/Au(001) trilayers grown by molecular-beam epitaxy on Ag(001), the Fe and Au layers are well represented by their bulk structure, whereas, thin Pd layers have a face-centered tetragonal structure with an in-plane expansion of 4.2% and an out-of-plane contraction of 7.2% (c/a=0.89). Theoretical ab initio studies of the interfacial structure indicate that the structural ground state of the epitaxially strained Pd layer is well described by a fct structure which maintains the bulk Pd atomic volume with small deviations at the interface. For Fe/Pd/Fe trilayers, the interlayer coupling oscillates with a period of 4 monolayers (ML) on a ferromagnetic background that crosses to weak antiferromagnetic coupling for thicknesses >12 ML of Pd. Strong ferromagnetic coupling observed below 5 ML of Pd indicates that 2 ML of Pd at each interface are ferromagnetically ordered. Theoretical studies of Fe3Pdn superlattices (where n is the number of Pd atomic layers) determine the polarization of the Pd layer and the interlayer magnetic coupling to depend strongly on the c/a ratio of the Pd layers. Modeling of a Pd layer with a constant-volume fct structure and one monolayer interfacial roughness find that the first 2 ML of the Pd is polarized in close agreement with the experimental results. Polarized neutron reflectivity results on an Fe(5.6 ML)/Pd(7 ML)/Au(20 ML) sample determine the average moment per Fe atom of 2.66+/-0.05μB. Calculations for the same structure show that this value is consistent with the induced Pd polarization.

75 FR 3791 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... Department of Agriculture Rural Utilities Service Broadband Technology Opportunities Program; Notices #0;#0... 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National Telecommunications and... for the Broadband Technology Opportunities Program (BTOP or Program) that the agency established...

Communication Intervention for Young Children with Severe Neurodevelopmental Disabilities Via Telehealth.

PubMed

Simacek, Jessica; Dimian, Adele F; McComas, Jennifer J

2017-03-01

Young children with neurodevelopmental disorders such as autism spectrum disorders (ASD) and Rett syndrome often experience severe communication impairments. This study examined the efficacy of parent-implemented communication assessment and intervention with remote coaching via telehealth on the acquisition of early communication skills of three young children with ASD (2) and Rett syndrome (1). Efficacy of the intervention was evaluated using single-case experimental designs. First, functional assessment was used to identify idiosyncratic/potentially communicative responses and contexts for each child. Next, parents implemented functional communication training (FCT). All of the children acquired the targeted communication responses. The findings support the efficacy of telehealth as a service delivery model to coach parents on intervention strategies for their children's early communication skills.

A Coordinated Initialization Process for the Distributed Space Exploration Simulation (DSES)

NASA Technical Reports Server (NTRS)

Phillips, Robert; Dexter, Dan; Hasan, David; Crues, Edwin Z.

2007-01-01

This document describes the federate initialization process that was developed at the NASA Johnson Space Center with the HIIA Transfer Vehicle Flight Controller Trainer (HTV FCT) simulations and refined in the Distributed Space Exploration Simulation (DSES). These simulations use the High Level Architecture (HLA) IEEE 1516 to provide the communication and coordination between the distributed parts of the simulation. The purpose of the paper is to describe a generic initialization sequence that can be used to create a federate that can: 1. Properly initialize all HLA objects, object instances, interactions, and time management 2. Check for the presence of all federates 3. Coordinate startup with other federates 4. Robustly initialize and share initial object instance data with other federates.

Texture formation in FePt thin films via thermal stress management

NASA Astrophysics Data System (ADS)

Rasmussen, P.; Rui, X.; Shield, J. E.

2005-05-01

The transformation variant of the fcc to fct transformation in FePt thin films was tailored by controlling the stresses in the thin films, thereby allowing selection of in- or out-of-plane c-axis orientation. FePt thin films were deposited at ambient temperature on several substrates with differing coefficients of thermal expansion relative to the FePt, which generated thermal stresses during the ordering heat treatment. X-ray diffraction analysis revealed preferential out-of-plane c-axis orientation for FePt films deposited on substrates with a similar coefficients of thermal expansion, and random orientation for FePt films deposited on substrates with a very low coefficient of thermal expansion, which is consistent with theoretical analysis when considering residual stresses.

Site Remediation Technology InfoBase: A Guide to Federal Programs, Information Resources, and Publications on Contaminated Site Cleanup Technologies. First Edition

NASA Technical Reports Server (NTRS)

1998-01-01

Table of Contents: Federal Cleanup Programs; Federal Site Remediation Technology Development Assistance Programs; Federal Site Remediation Technology Development Electronic Data Bases; Federal Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Selected Bibliography: Federal Publication on Alternative and Innovative Site Remediation; and Appendix: Technology Program Contacts.

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

Space and nuclear research and technology

NASA Technical Reports Server (NTRS)

1975-01-01

A fact sheet is presented on the space and nuclear research and technology program consisting of a research and technology base, system studies, system technology programs, entry systems technology, and experimental programs.

Humanities Perspectives on Technology Program: Science, Technology & Society Program. Lehigh University, 1977-80.

ERIC Educational Resources Information Center

Cutcliffe, Stephen H., Ed.

Newsletter issues pertaining to Lehigh University's Humanities Perspectives on Technology (HPT) Program, which was renamed the Science, Technology and Society Program, are presented. Additionally, a newsletter article excerpt entitled "Elements of Technology in a Liberal Education" is included. Two 1977 issues of "HRP News,"…

Fuel Cell and Hydrogen Technologies Program | Hydrogen and Fuel Cells |

Science.gov Websites

NREL Fuel Cell and Hydrogen Technologies Program Fuel Cell and Hydrogen Technologies Program Through its Fuel Cell and Hydrogen Technologies Program, NREL researches, develops, analyzes, and validates fuel cell and hydrogen production, delivery, and storage technologies for transportation

75 FR 27984 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-19

....: 0907141137-0222-10] RIN 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National...; Reopening of Application Filing Window for Broadband Technology Opportunities Program Comprehensive... filing window for the Broadband Technology Opportunities Program (BTOP) that the agency established...

75 FR 20038 - Railroad Safety Technology Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

...] Railroad Safety Technology Grant Program AGENCY: Federal Railroad Administration, Department of Transportation. ACTION: Notice of Funds Availability, Railroad Safety Technology Program-Correction of Grant... Railroad Safety Technology Program, in the section, ``Requirements and Conditions for Grant Applications...

NASA's Microgravity Technology Report, 1996: Summary of Activities

NASA Technical Reports Server (NTRS)

Kierk, Isabella

1996-01-01

This report covers technology development and technology transfer activities within the Microgravity Science Research Programs during FY 1996. It also describes the recent major tasks under the Advanced Technology Development (ATD) Program and identifies current technology requirements. This document is consistent with NASA,s Enteprise for the Human Exploration and development of Space (HEDS) Strategic Plan. This annual update reflects changes in the Microgravity Science Research Program's new technology activities and requirements. Appendix A. FY 1996 Advanced Technology Development. Program and Project Descriptions. Appendix B. Technology Development.

34 CFR 403.1 - What is the State Vocational and Applied Technology Education Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the State Vocational and Applied Technology... TECHNOLOGY EDUCATION PROGRAM General § 403.1 What is the State Vocational and Applied Technology Education Program? (a) Under the State Vocational and Applied Technology Education Program, the Secretary makes...

Mississippi Curriculum Framework for Computer Information Systems Technology. Computer Information Systems Technology (Program CIP: 52.1201--Management Information Systems & Business Data). Computer Programming (Program CIP: 52.1201). Network Support (Program CIP: 52.1290--Computer Network Support Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for two programs in the state's postsecondary-level computer information systems technology cluster: computer programming and network support. Presented in the introduction are program descriptions and suggested course…

CSTI Earth-to-orbit propulsion research and technology program overview

NASA Technical Reports Server (NTRS)

Gentz, Steven J.

1993-01-01

NASA supports a vigorous Earth-to-orbit (ETO) research and technology program as part of its Civil Space Technology Initiative. The purpose of this program is to provide an up-to-date technology base to support future space transportation needs for a new generation of lower cost, operationally efficient, long-lived and highly reliable ETO propulsion systems by enhancing the knowledge, understanding and design methodology applicable to advanced oxygen/hydrogen and oxygen/hydrocarbon ETO propulsion systems. Program areas of interest include analytical models, advanced component technology, instrumentation, and validation/verification testing. Organizationally, the program is divided between technology acquisition and technology verification as follows: (1) technology acquisition; and (2) technology verification.

76 FR 18166 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-01

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

75 FR 62369 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-08

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

75 FR 22553 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-29

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program Advisory Board, National...

34 CFR 400.1 - What is the purpose of the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Technology Education Programs? 400.1 Section 400.1 Education Regulations of the Offices of the Department of... APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.1 What is the purpose of the Vocational and Applied Technology Education Programs? (a) The purpose of the Vocational and Applied Technology Education...

76 FR 70970 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-16

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of public meeting. SUMMARY: The Technology Innovation Program (TIP) Advisory Board will...

[Epidemiology of caprine and ovine brucellosis in Formosa province, Argentina].

PubMed

Russo, Ana M; Mancebo, Orlando A; Monzón, Carlos M; Gait, Juan J; Casco, Rubén D; Torioni de Echaide, Susana M

2016-01-01

An epidemiological study of brucellosis was carried out in 516 goats and mixed flocks (goat/sheep) from the three agro-ecological regions of Formosa province, Argentina. Serum samples from a total of 25401 goats and 2453 sheeps were analyzed using buffered plate agglutination test (BPAT) and complement fixation test (CFT). Bacteriological and PCR analyses on milk samples from goats in three flocks with a history of brucellosis and recent abortions were also performed. Brucellosis was detected in four of the nine departments of the province with an overall prevalence of 2% and an intra-flock prevalence ranging between 1% and 40%. The proportion of infected flocks was 3.6%, 12% and 36% for the eastern, central and western regions, respectively. Brucella melitensis bv. 1 was isolated efrom goats for the first time in the province. The expected fragments of 827bp from the omp2ab gene (Brucella spp.) and 731bp from the insert IS711 (B. melitensis) were amplified by PCR. Detection of antibodies by BPAT and FCT in sheep cohabiting with goats suggests that infections could have been caused by B. melitensis, posing an additional risk to public health. Control and eradication programs for brucellosis should consider mixed flocks as a single epidemiological unit. The results indicate that brucellosis by B. melitensis bv1 is highly endemic in the central and western regions of Formosa province. Copyright © 2015 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

ERIC Educational Resources Information Center

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES 4th Edition

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment technologies. As a result, the SI...

Evidence-Based Medicine and State Health Care Coverage: The Washington Health Technology Assessment Program.

PubMed

Rothman, David J; Blackwood, Kristy L; Adair, Whitney; Rothman, Sheila M

2018-04-01

To evaluate the Washington State Health Technology Assessment Program (WHTAP). Washington State Health Technology Assessment Program proceedings in Seattle, Washington. We assessed the program through observation of its proceedings over a 5-year period, 2009-2014. We conducted detailed analyses of the documents it produced and reviewed relevant literature. Washington State Health Technology Assessment Program is unique compared to other state and federal programs. It has successfully applied evidence-based medicine to health care decision making, limited by the strength of available data. It claims cost savings, but they are not substantiated. Washington State Health Technology Assessment Program is a useful model for other states considering implementation of technology assessment programs. We provide key lessons for improving WHTAP's process. © Health Research and Educational Trust.

Center for development technology and program in technology and human affairs. [emphasizing technology-based networks

NASA Technical Reports Server (NTRS)

Wong, M. D.

1974-01-01

The role of technology in nontraditional higher education with particular emphasis on technology-based networks is analyzed nontraditional programs, institutions, and consortia are briefly reviewed. Nontraditional programs which utilize technology are studied. Technology-based networks are surveyed and analyzed with regard to kinds of students, learning locations, technology utilization, interinstitutional relationships, cost aspects, problems, and future outlook.

COMPI Fertility Problem Stress Scales is a brief, valid and reliable tool for assessing stress in patients seeking treatment.

PubMed

Sobral, Maria P; Costa, Maria E; Schmidt, Lone; Martins, Mariana V

2017-02-01

Are the Copenhagen Multi-Centre Psychosocial Infertility research program Fertility Problem Stress Scales (COMPI-FPSS) a reliable and valid measure across gender and culture? The COMPI-FPSS is a valid and reliable measure, presenting excellent or good fit in the majority of the analyzed countries, and demonstrating full invariance across genders and partial invariance across cultures. Cross-cultural and gender validation is needed to consider a measure as standard care within fertility. The present study is the first attempting to establish comparability of fertility-related stress across genders and countries. Cross-sectional study. First, we tested the structure of the COMPI-FPSS. Then, reliability and validity (convergent and discriminant) were examined for the final model. Finally, measurement invariance both across genders and cultures was tested. Our final sample had 3923 fertility patients (1691 men and 2232 women) recruited in clinical settings from seven different countries: Denmark, China, Croatia, Germany, Greece, Hungary and Sweden. Participants had a mean age of 34 years and the majority (84%) were childless. Findings confirmed the original three-factor structure of the COMPI-FPSS, although suggesting a shortened measurement model using less items that fitted the data better than the full version model. While data from the Chinese and Croatian subsamples did not fit, all other counties presented good fit (χ 2 /df ≤ 5.4; comparative fit index ≥ 0.94; root-mean-square error of approximation ≤ 0.07; modified expected cross-validation index ≤ 0.77). In general, reliability, convergent validity, and discriminant validity were observed in all subscales from each country (composite reliability ≥ 0.63; average variance extracted ≥ 0.38; squared correlation ≥ 0.13). Full invariance was established across genders, and partial invariance was demonstrated across countries. Generalizability regarding the validation of the COMPI-FPSS cannot be made regarding infertile individuals not seeking treatment, or non-European patients. This study did not investigate predictive validity, and hence the capability of this instrument in detecting changes in fertility-specific adjustment over time and predicting the psychological impact needs to be established in future research. Besides extending knowledge on the psychometric properties of one of the most used fertility stress questionnaire, this study demonstrates both research and clinical usefulness of the COMPI-FPSS. This study was supported by European Union Funds (FEDER/COMPETE-Operational Competitiveness Program, and by national funds (FCT-Portuguese Foundation for Science and Technology) under the projects PTDC/MHC-PSC/4195/2012 and SFRH/BPD/85789/2012). There are no conflicts of interest to declare. N/A. © The Author 2016. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Seismic characterization of fluid migration and Pockmarks in the Estremadura Spur, West Iberian Margin, Portugal

NASA Astrophysics Data System (ADS)

Duarte, Débora; Magalhães, Vitor Hugo; Terrinha, Pedro; Ribeiro, Carlos; Madureira, Pedro; Menezes Pinheiro, Luís; Benazzouz, Omar; Kim, Jung-Hyun; Duarte, Henrique

2017-04-01

Recently a field with more than 70 pockmarks was discovered in the NW region of the Estremadura Spur outer shelf (West Iberian margin), a trapezoidal promontory elongated in an east-west direction, between Cabo Carvoeiro and Cabo da Roca, extending until the Tore seamount. Pockmarks are the seabed culminations of fluid migration through the sedimentary column and their characteristic seabed morphologies correspond to cone-shaped circular or elliptical depressions. These features and the associated fluid escape process are the main objectives of this work. Here we characterize these structures to understand their structural and stratigraphic control based on: 1) Seismic processing and interpretation of the high resolution 2D single-channel sparker seismic dataset, 2) Bathymetric and Backscatter interpretation and 3) ROV direct observation of the seafloor. The analysis of the seismic profiles allowed the identification of six seismic units, disturbed by the migration and accumulation of fluids. The Estremadura Spur outer shelf has been affected by several episodes of fluid migration and fluid escape during the Pliocene-Quaternary that are expressed by a vast number of seabed and buried pockmarks. At present, the pockmarks are mainly inactive, as the seabed pockmarks are covered by recent sediments. The stacking of various pockmarks suggests a cyclical fluid flow activity that can possibly be the result of the eustatic sea level variations and the subsequent changes of the hydrostatic pressure. The origin of the seep fluids is still under debate but considering the low-sedimentation rate of the area and the low productivity a deep source for the fluids is most probable, possibly related with the Jurassic hydrocarbon system. It was concluded that the migration of fluids to the seabed occurred over the Pliocene-Quaternary in several episodes, as indicated by the buried pockmarks at different depths. Acknowledgements: This work was carried out in the framework of the PES project - Pockmarks and fluid seepage in the Estremadura Spur: implications for regional geology, biology, and petroleum systems (PTDC/GEOFIQ/5162/2014) financed by the Portuguese Foundation for Science and Technology (FCT). The seismic dataset was acquired within the PACEMAKER project funded by the European Research Council (ERC) under the European Union's Seventh Framework Program (FP7/2007-2013) ERC agreement (226600). The Instituto Portugues do Mar e da Atmosfera acknowledges support by Landmark Graphics (SeisWorks) via the Landmark University Grant Program. We thank the Estrutura de Missão para a Extensão da Plataforma Continental (EMEPC) for allowing me to have access and use the data collected in the Estremadura Spur during the EMEPC/PEPC/LUSO/2015 cruise and the ROV Luso team. We also thank Prof. Dr. Luis Matias (FCUL & IDL) for the help with SPW and processing steps.

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2010 CFR

2010-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

Strengthening 4-H Program Communication through Technology

ERIC Educational Resources Information Center

Robideau, Kari; Santl, Karyn

2011-01-01

Advances in technology are transforming how youth and parents interact with programs. The Strengthening 4-H Communication through Technology project was implemented in eight county 4-H programs in Northwest Minnesota. This article outlines the intentional process used to effectively implement technology in program planning. The project includes:…

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2012 CFR

2012-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2014 CFR

2014-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2011 CFR

2011-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

34 CFR 400.9 - What additional requirements govern the Vocational and Applied Technology Education Programs?

Code of Federal Regulations, 2013 CFR

2013-07-01

... Applied Technology Education Programs? 400.9 Section 400.9 Education Regulations of the Offices of the... VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS-GENERAL PROVISIONS § 400.9 What additional requirements govern the Vocational and Applied Technology Education Programs? In addition to the Act, applicable...

Clean Coal Technology Demonstration Program: Program Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

NASA Funding Opportunities for Optical Fabrication and Testing Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

Technologies to fabricate and test optical components are required for NASA to accomplish its highest priority science missions. For example, the NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities report states that the highest priority technology in which NASA should invest to 'Expand our understanding of Earth and the universe' is a new generation of astronomical telescopes. And, each of the Astrophysics division Program Office Annual Technology Reports (PATR), identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) technology development programs.

Research and Technology: 2003 Annual Report of the John F Kennedy Space Center

NASA Technical Reports Server (NTRS)

2003-01-01

The John F. Kennedy Space Center (KSC) is America's Spaceport Technology Center. The KSC technology development program encompasses the efforts of the entire KSC team, consisting of Government and contractor personnel, working in partnership with academic institutions and commercial industry. KSC's assigned mission areas are space launch operations and spaceport and range technologies. KSC's technology development customers include current space transportation programs, future space transportation programs / initiatives, and enabling technical programs. The KSC Research and Technology 2003 Annual Report encompasses the efforts of contributors to the KSC advanced technology development program and KSC technology transfer activities. Dr. Dave Bartine, KSC Chief Technologist, (321) 867-7069, is responsible for publication of this report and should be contacted for any desired information regarding KSC's research and technology development activities.

Aeronautics Research and Technology Program and specific objectives, fiscal year 1982

NASA Technical Reports Server (NTRS)

Olstad, W. B.

1981-01-01

The Aeronautics Research and Technology program is broken down into two program areas (research and technology base, and systems technology programs) which are further broken down into succeedingly more detailed activities to form a work breakdown structure for the aeronautics program: program area, program/discipline objective, specific objective, and research and technology objective and plan (RTOP). A detailed view of this work breakdown structure down to the specific objective level is provided, and goals or objectives at each of these levels are set forth. What is to be accomplished and why are addressed, but not how. The letter falls within the domain of the RTOP.

Impact of emerging technologies on future combat aircraft agility

NASA Technical Reports Server (NTRS)

Nguyen, Luat T.; Gilert, William P.

1990-01-01

The foreseeable character of future within-visual-range air combat entails a degree of agility which calls for the integration of high-alpha aerodynamics, thrust vectoring, intimate pilot/vehicle interfaces, and advanced weapons/avionics suites, in prospective configurations. The primary technology-development programs currently contributing to these goals are presently discussed; they encompass the F-15 Short Takeoff and Landing/Maneuver Technology Demonstrator Program, the Enhanced Fighter Maneuverability Program, the High Angle-of-Attack Technology Program, and the X-29 Technology Demonstrator Program.

High-order local maximum principle preserving (MPP) discontinuous Galerkin finite element method for the transport equation

NASA Astrophysics Data System (ADS)

Anderson, R.; Dobrev, V.; Kolev, Tz.; Kuzmin, D.; Quezada de Luna, M.; Rieben, R.; Tomov, V.

2017-04-01

In this work we present a FCT-like Maximum-Principle Preserving (MPP) method to solve the transport equation. We use high-order polynomial spaces; in particular, we consider up to 5th order spaces in two and three dimensions and 23rd order spaces in one dimension. The method combines the concepts of positive basis functions for discontinuous Galerkin finite element spatial discretization, locally defined solution bounds, element-based flux correction, and non-linear local mass redistribution. We consider a simple 1D problem with non-smooth initial data to explain and understand the behavior of different parts of the method. Convergence tests in space indicate that high-order accuracy is achieved. Numerical results from several benchmarks in two and three dimensions are also reported.

Multidimensional FEM-FCT schemes for arbitrary time stepping

NASA Astrophysics Data System (ADS)

Kuzmin, D.; Möller, M.; Turek, S.

2003-05-01

The flux-corrected-transport paradigm is generalized to finite-element schemes based on arbitrary time stepping. A conservative flux decomposition procedure is proposed for both convective and diffusive terms. Mathematical properties of positivity-preserving schemes are reviewed. A nonoscillatory low-order method is constructed by elimination of negative off-diagonal entries of the discrete transport operator. The linearization of source terms and extension to hyperbolic systems are discussed. Zalesak's multidimensional limiter is employed to switch between linear discretizations of high and low order. A rigorous proof of positivity is provided. The treatment of non-linearities and iterative solution of linear systems are addressed. The performance of the new algorithm is illustrated by numerical examples for the shock tube problem in one dimension and scalar transport equations in two dimensions.

Direct observation of void evolution during cement hydration

DOE PAGES

Moradian, Masoud; Hu, Qinang; Aboustait, Mohammed; ...

2017-09-28

This study follows the hydration of both portland cement and tricalcium silicate pastes between 30 min and 16 h of hydration. In-situ fast X-ray Computed Tomography (fCT) was used to make direct observations of the air-filled void formation in w/s of 0.40 to 0.70 with a micron resolution. The results show that over the first hour of the acceleration period the volume of air-filled voids reaches a maximum value and then decreases during the acceleration period and stays constant. The void distribution changes from a few coarse voids to a large number of smaller and more uniformly distributed voids. Thismore » behavior is suggested to be controlled by changes in the ionic strength that cause exsolution of dissolved air from the pore solution.« less

Direct observation of void evolution during cement hydration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moradian, Masoud; Hu, Qinang; Aboustait, Mohammed

This study follows the hydration of both portland cement and tricalcium silicate pastes between 30 min and 16 h of hydration. In-situ fast X-ray Computed Tomography (fCT) was used to make direct observations of the air-filled void formation in w/s of 0.40 to 0.70 with a micron resolution. The results show that over the first hour of the acceleration period the volume of air-filled voids reaches a maximum value and then decreases during the acceleration period and stays constant. The void distribution changes from a few coarse voids to a large number of smaller and more uniformly distributed voids. Thismore » behavior is suggested to be controlled by changes in the ionic strength that cause exsolution of dissolved air from the pore solution.« less

Differential impact of response effort within a response chain on use of mands in a student with autism.

PubMed

Buckley, Scott D; Newchok, Debra K

2005-01-01

We investigated the effects of response effort on the use of mands during functional communication training (FCT) in a participant with autism. The number of links in a picture exchange response chain determined two levels of response effort. Each level was paired with a fixed ratio (FR3) schedule of reinforcement for aggression in a reversal design. Responding to either schedule produced access to a preferred item. The participant opted for the low effort mand while aggression decreased significantly. However, the high effort mand did not compete with the FR3 schedule for aggression. Results are discussed in terms of response effort within a response chain of a picture exchange system and competing ratio schedules for problem behavior during mand training.

Daily precipitation extreme events for the Iberian Peninsula and its association with Atmospheric Rivers

NASA Astrophysics Data System (ADS)

Ramos, Alexandre M.; Trigo, Ricardo M.; Liberato, Margarida LR

2014-05-01

Extreme precipitation events in the Iberian Peninsula during the extended winter months have major socio-economic impacts such as floods, landslides, extensive property damage and life losses. These events are usually associated with low pressure systems with Atlantic origin, although some extreme events in summer/autumn months can be linked to Mediterranean low pressure systems. Quite often these events are evaluated on a casuistic base and making use of data from relatively few stations. An objective method for ranking daily precipitation events is presented here based on the extensive use of the most comprehensive database of daily gridded precipitation available for the Iberian Peninsula (IB02) and spanning from 1950 to 2008, with a resolution of 0.2° (approximately 16 x 22 km at latitude 40°N), for a total of 1673 pixels. This database is based on a dense network of rain gauges, combining two national data sets, 'Spain02' for peninsular Spain and Balearic islands, and 'PT02' for mainland Portugal, with a total of more than two thousand stations over Spain and four hundred stations over Portugal, all quality-controlled and homogenized. Through this objective method for ranking daily precipitation events the magnitude of an event is obtained after considering the area affected as well as its intensity in every grid point and taking into account the daily precipitation normalised departure from climatology. Different precipitation rankings are presented considering the entire Iberian Peninsula, Portugal and also the six largest river basins in the Iberian Peninsula. Atmospheric Rivers (AR) are the water vapour (WV) core section of the broader warm conveyor belt occurring over the oceans along the warm sector of extra-tropical cyclones. They are usually W-E oriented steered by pre-frontal low level jets along the trailing cold front and subsequently feed the precipitation in the extra-tropical cyclones. They are relatively narrow regions of concentrated WV responsible for horizontal transport in the lower atmosphere. It was shown that more than 90% of the meridional WV transport in the mid-latitudes occurs in the AR, although they cover less than 10% of the area of the globe. The large amount of WV that is transported can lead to heavy precipitation and floods. In this work we use an automated AR detection algorithm for the North Atlantic Ocean Basin to identify the major AR events that affected the Iberian Peninsula based on the NCEP/NCAR reanalysis. The two different databases (extreme precipitation events and AR) will be analysed together in order to study ARs in detail in the North Atlantic Basin and, additionally, the relationship with precipitation-related events in Iberian Peninsula. Results confirm the significance link between these phenomena, as the TOP 20 days of the ranking of precipitation anomalies for the Iberian Peninsula includes 19 days that are clearly related with AR events. This work was partially supported by FEDER (Fundo Europeu de Desenvolvimento Regional) funds through the COMPETE (Programa Operacional Factores de Competitividade) and by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project STORMEx FCOMP-01-0124-FEDER-019524 (PTDC/AAC-CLI/121339/2010). A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/SFRH/BPD/84328/2012).

Extreme precipitation events in the Iberian Peninsula and its association with Atmospheric Rivers

NASA Astrophysics Data System (ADS)

Ramos, Alexandre M.; Liberato, Margarida L. R.; Trigo, Ricardo M.

2015-04-01

Extreme precipitation events in the Iberian Peninsula during the winter half of the year have major socio-economic impacts associated with floods, landslides, extensive property damage and life losses. In recent years, a number of works have shed new light on the role played by Atmospheric Rivers (ARs) in the occurrence of extreme precipitation events in both Europe and USA. ARs are relatively narrow regions of concentrated WV responsible for horizontal transport in the lower atmosphere corresponding to the core section of the broader warm conveyor belt occurring over the oceans along the warm sector of extra-tropical cyclones. Over the North Atlantic ARs are usually W-E oriented steered by pre-frontal low level jets along the trailing cold front and subsequently feed the precipitation in the extra-tropical cyclones. It was shown that more than 90% of the meridional WV transport in the mid-latitudes occurs in the AR, although they cover less than 10% of the area of the globe. The large amount of WV that is transported can lead to heavy precipitation and floods. An automated ARs detection algorithm is used for the North Atlantic Ocean Basin allowing the identification and a comprehensive characterization of the major AR events that affected the Iberian Peninsula over the 1948-2012 period. The extreme precipitation days in the Iberian Peninsula were assessed recently by us (Ramos et al., 2014) and their association (or not) with the occurrence of AR is analyzed in detail here. The extreme precipitation days are ranked by their magnitude and are obtained after considering 1) the area affected and 2) the precipitation intensity. Different rankings are presented for the entire Iberian Peninsula, Portugal and also for the six largest Iberian river basins (Minho, Duero, Tagus, Guadiana, Guadalquivir and Ebro) covering the 1950-2008 period (Ramos et al., 2014). Results show that the association between ARs and extreme precipitation days in the western domains (Portugal, Minho, Tagus and Duero) is noteworthy, while for the eastern and southern basins (Ebro, Guadiana and Guadalquivir) the impact of ARs is reduced. In addition, meteorological large scale influence associated with ARs was also analyzed. The anomalies between the extended winter (ONDJFM) long term mean and the composite for the persistent ARs time steps were computed for the IVT and SLP fields. Negative SLP anomalies are found centered in Ireland with slight positive anomalies of SLP located over northern Africa. It was found that the ARs hitting the IP are strongly correlated with the EA pattern, while the influence of other patterns such as the NAO or SCAND is weak. Main results presented are currently in print (Ramos et al., 2015) Ramos et al (2014), A ranking of high-resolution daily precipitation extreme events for the Iberian Peninsula. Atmospheric Science Letters, doi: 10.1002/asl2.507. Ramos et al. (2015), Daily precipitation extreme events in the Iberian Peninsula and its association with Atmospheric Rivers. Journal Hydrometeorology, in press. This work was partially supported by FEDER (Fundo Europeu de Desenvolvimento Regional) funds through the COMPETE (Programa Operacional Factores de Competitividade) and by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project STORMEx FCOMP-01-0124-FEDER-019524 (PTDC/AAC-CLI/121339/2010). A. M. Ramos was also supported by a FCT postdoctoral grant (FCT/DFRH/SFRH/BPD/84328/2012).

Assessing the Impact and Effectiveness of the Advanced Technological Education (ATE) Program. Survey Results 2004. Volume III: Status of ATE Projects and Articulation Partnerships

ERIC Educational Resources Information Center

Coryn, Chris L.; Gullickson, Arlen R.; Hanssen, Carl E.

2004-01-01

The Advanced Technological Education (ATE) program is a federally funded program designed to educate technicians for the high-technology disciplines that drive the United State's economy. As stated in the ATE program guidelines, this program promotes improvement in technological education at the undergraduate and secondary school levels by…

Analysis of Engineering Content within Technology Education Programs

ERIC Educational Resources Information Center

Fantz, Todd D.; Katsioloudis, Petros J.

2011-01-01

In order to effectively teach engineering, technology teachers need to be taught engineering content, concepts, and related pedagogy. Some researchers posit that technology education programs may not have enough content to prepare technology teachers to teach engineering design. Certain technology teacher education programs have responded by…

Women in Technology: The Evolution of a Simple Program That Works.

ERIC Educational Resources Information Center

Crumb, Jean Marie; Fenton, Ray

Three papers present views on women in technology programs and occupations, and on Corning Community College's (CCC's) program to encourage women to enter technological fields in which they have been historically underrepresented. First, Edward F. Herman presents the historical background to the development of CCC's Women in Technology program,…

15 CFR 296.33 - Annual report.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM... House of Representatives a report describing the Technology Innovation Program's activities, including a... for management of programs to stimulate high-risk, high-reward research. ...

NASA Technology Applications Team

NASA Technical Reports Server (NTRS)

1979-01-01

The contributions of NASA to the advancement of the level of the technology base of the United States are highlighted. Technological transfer from preflight programs, the Viking program, the Apollo program, and the Shuttle and Skylab programs is reported.

34 CFR 400.2 - What programs are governed by these regulations?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION VOCATIONAL AND APPLIED TECHNOLOGY EDUCATION PROGRAMS... apply to the Vocational and Applied Technology Education Programs as follows: (a) State-administered programs. (1) State Vocational and Applied Technology Education Program (34 CFR part 403). (2) State...

Audiovisual Programming. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials on audiovisual programming for students in grades 6-10 consists of a technology education overview, information on use, and the instructor's and student's sections. The overview discusses the technology education program and materials. Components of the instructor's and student's sections…

Identifying new technologies that save energy and reduce costs to the Federal sector: The New Technology Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hunt, W.D.M.; Conover, D.R.; Stockmeyer, M.K.

1995-11-01

In 1990 the New Technology Demonstration Program (formerly the Test Bed Demonstration Program) was initiated by the US Department of Energy`s Office (DOE`s) of Federal Energy Management Programs with the purpose of accelerating the introduction of new technologies into the Federal sector. The program has since expanded into a multi-laboratory collaborative effort that evaluates new technologies and shares the results with the Federal design and procurement communities. These evaluations are performed on a collaborative basis which typically includes technology manufacturers, Federal facilities, utilities, trade associations, research institutes, and other in partnership with DOE. The end result is a range ofmore » effective technology transfer tools that provide operations and performance data on new technologies to Federal designers, building managers, and procurement officials. These tools assist in accelerating a technology`s Federal application and realizing reductions in energy consumption and costs.« less

Free piston space Stirling technology program

NASA Technical Reports Server (NTRS)

Dochat, G. R.; Dhar, M.

1989-01-01

MTI recently completed an initial technology feasibility program for NASA by designing, fabricating and testing a space power demonstrator engine (SPDE). This program, which confirms the potential of free-piston Stirling engines, provided the major impetus to initiate a free-piston Stirling space engine (SSE) technology program. The accomplishments of the SPDE program are reviewed, and an overview of the SSE technology program and technical status to date is provided. It is shown that progress in both programs continues to justify its potential for either nuclear or solar space power missions.

Hydro-geomorphologic disasters in Portugal: mortality trends in the past 150 years

NASA Astrophysics Data System (ADS)

Pereira, Susana; Zêzere, José L.; Quaresma, Ivânia; Santos, Pedro P.; Santos, Mónica

2015-04-01

For the first time in Portugal, an extensive analysis of the mortality caused by hydro-geomorphological hazards was made, for a long period (1865-2010) using the DISASTER database (Zêzere et al., 2014). This database was built under the assumption that social consequences (including fatalities) of floods and landslides are relevant enough to be reported by newspapers, which were the source for data collection. This database counts 1902 hydro-geomorphologic cases that caused 1248 fatalities, 14 191 evacuated persons and 41 844 homeless persons. Floods correspond to the majority of cases (85.2%) that caused 1012 fatalities. Landslides correspond to 14.8 % of the total hydro-geomorphologic cases and caused 236 fatalities. The exploitation of the DISASTER database allowed: (i) to analyze the frequency and the temporal evolution of fatal floods and landslides; (ii) to analyze the spatio-temporal distribution of fatalities; (iii) to identify the most deadly flood and landslide types; and (iv) to evaluate the individual and societal risk. The obtained results demonstrate the absence of any exponential growth with time of hydro-geomorphologic cases and associated fatalities in Portugal. The highest flood and landslide cases as well as the associated mortality were registered in the period 1935-1969. After this period, flood and landslide mortality decreased, although landslide fatalities remained higher than the registered in the period 1865-1934. These features do not account the exceptional flash flood event occurred in the Lisbon region in November 1967. This outlier event was responsible for 522 fatalities, which corresponds to more than half of the total mortality generated by floods in Portugal in the complete time series (1865 - 2010). Moreover, the 1967 flash flood event was the deadliest natural disaster registered in Portugal after the Lisbon earthquake occurred in 1755, not accounting heat waves. Flood fatalities occurred widespread in the country, with an important cluster in the Lisbon Region and in the Tagus valley, Oporto and Coimbra cities, where simultaneously, natural conditions are favorable to floods and a high number of people are exposed to flood hazard (e.g. residential buildings and economic activities installed in floodplains). The occurrence of landslide fatalities is mostly constrained in the north of the Tagus valley, where geologic and geomorphologic conditions are more landslide-prone than in the southern part of the country. Flash floods caused the majority of fatalities associated with floods, while falls and flows were responsible for the highest frequency of fatalities associated with landslides. The temporal evolution of flood fatalities reflects the implementation of territorial management policies and the improving of early warning systems for floods and the evacuation of people living in floodplain areas prior major flood events, in Portugal in the latest four decades. In the case of landslides, despite the improving in the quality of buildings construction, fatalities generated by landslides are still frequent because buildings are often located in hazardous slopes. In addition, so far no early warning system for landslide was implemented in Portugal. This research was supported by the Portuguese Foundation for Science and Technology (FCT). The first author is a Post-Doc fellow funded by FCT (SFRH/BPD/69002/2010).

Regional rainfall thresholds for landslide occurrence using a centenary database

NASA Astrophysics Data System (ADS)

Vaz, Teresa; Luís Zêzere, José; Pereira, Susana; Cruz Oliveira, Sérgio; Quaresma, Ivânia

2017-04-01

Rainfall is one of the most important triggering factors for landslides occurrence worldwide. The relation between rainfall and landslide occurrence is complex and some approaches have been focus on the rainfall thresholds identification, i.e., rainfall critical values that when exceeded can initiate landslide activity. In line with these approaches, this work proposes and validates rainfall thresholds for the Lisbon region (Portugal), using a centenary landslide database associated with a centenary daily rainfall database. The main objectives of the work are the following: i) to compute antecedent rainfall thresholds using linear and potential regression; ii) to define lower limit and upper limit rainfall thresholds; iii) to estimate the probability of critical rainfall conditions associated with landslide events; and iv) to assess the thresholds performance using receiver operating characteristic (ROC) metrics. In this study we consider the DISASTER database, which lists landslides that caused fatalities, injuries, missing people, evacuated and homeless people occurred in Portugal from 1865 to 2010. The DISASTER database was carried out exploring several Portuguese daily and weekly newspapers. Using the same newspaper sources, the DISASTER database was recently updated to include also the landslides that did not caused any human damage, which were also considered for this study. The daily rainfall data were collected at the Lisboa-Geofísico meteorological station. This station was selected considering the quality and completeness of the rainfall data, with records that started in 1864. The methodology adopted included the computation, for each landslide event, of the cumulative antecedent rainfall for different durations (1 to 90 consecutive days). In a second step, for each combination of rainfall quantity-duration, the return period was estimated using the Gumbel probability distribution. The pair (quantity-duration) with the highest return period was considered as the critical rainfall combination responsible for triggering the landslide event. Only events whose critical rainfall combinations have a return period above 3 years were included. This criterion reduces the likelihood of been included events whose triggering factor was other than rainfall. The rainfall quantity-duration threshold for the Lisbon region was firstly defined using the linear and potential regression. Considering that this threshold allow the existence of false negatives (i.e. events below the threshold) it was also identified the lower limit and upper limit rainfall thresholds. These limits were defined empirically by establishing the quantity-durations combinations bellow which no landslides were recorded (lower limit) and the quantity-durations combinations above which only landslides were recorded without any false positive occurrence (upper limit). The zone between the lower limit and upper limit rainfall thresholds was analysed using a probabilistic approach, defining the uncertainties of each rainfall critical conditions in the triggering of landslides. Finally, the performances of the thresholds obtained in this study were assessed using ROC metrics. This work was supported by the project FORLAND - Hydrogeomorphologic risk in Portugal: driving forces and application for land use planning [grant number PTDC/ATPGEO/1660/2014] funded by the Portuguese Foundation for Science and Technology (FCT), Portugal. Sérgio Cruz Oliveira is a post-doc fellow of the FCT [grant number SFRH/BPD/85827/2012].

NASA funding opportunities for optical fabrication and testing technology development

NASA Astrophysics Data System (ADS)

Stahl, H. Philip

2013-09-01

NASA requires technologies to fabricate and test optical components to accomplish its highest priority science missions. The NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities Report states that the highest priority technology in which NASA should invest to `Expand our understanding of Earth and the universe' is next generation X-ray and UVOIR telescopes. Each of the Astrophysics division Program Office Annual Technology Reports (PATR) identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) programs.

Review of V/STOL lift/cruise fan technology

NASA Technical Reports Server (NTRS)

Rolls, L. S.; Quigley, H. C.; Perkins, R. G., Jr.

1976-01-01

This paper presents an overview of supporting technology programs conducted to reduce the risk in the joint NASA/Navy Lift/Cruise Fan Research and Technology Aircraft Program. The aeronautical community has endeavored to combine the low-speed and lifting capabilities of the helicopter with the high-speed capabilities of the jet aircraft; recent developments have indicated a lift/cruise fan propulsion system may provide these desired characteristics. NASA and the Navy have formulated a program that will provide a research and technology aircraft to furnish viability of the lift/cruise fan aircraft through flight experiences and obtain data on designs for future naval and civil V/STOL aircraft. The supporting technology programs discussed include: (1) design studies for operational aircraft, a research and technology aircraft, and associated propulsion systems; (2) wind-tunnel tests of several configurations; (3) propulsion-system thrust vectoring tests; and (4) simulation. These supporting technology programs have indicated that a satisfactory research and technology aircraft program can be accomplished within the current level of technology.

NASA Funding Opportunities for Optical Fabrication and Testing Technology Development

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2013-01-01

NASA requires technologies to fabricate and test optical components to accomplish its highest priority science missions. The NRC ASTRO2010 Decadal Survey states that an advanced large-aperture UVOIR telescope is required to enable the next generation of compelling astrophysics and exo-planet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. The NRC 2012 NASA Space Technology Roadmaps and Priorities Report states that the highest priority technology in which NASA should invest to 'Expand our understanding of Earth and the universe' is next generation X-ray and UVOIR telescopes. Each of the Astrophysics division Program Office Annual Technology Reports (PATR) identifies specific technology needs. NASA has a variety of programs to fund enabling technology development: SBIR (Small Business Innovative Research); the ROSES APRA and SAT programs (Research Opportunities in Space and Earth Science; Astrophysics Research and Analysis program; Strategic Astrophysics Technology program); and several Office of the Chief Technologist (OCT) programs

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM TECHNOLOGY PROFILES: SIXTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM - TECHNOLOGY PROFILES - SEVENTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program evaluates new and promising treatment and monitoring and measurement technologies for cleanup of hazardous waste sites. The program was created to encourage the development and routine use of innovative treatment techn...

75 FR 1591 - Green Technology Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... DEPARTMENT OF COMMERCE Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed... methods: E-mail: [email protected] . Include A0651-0062 Green Technology Pilot Program [email protected] in... green technologies, including greenhouse gas reduction. [[Page 1592

NASA's In Space Propulsion Technology Program Accomplishments and Lessons Learned

NASA Technical Reports Server (NTRS)

Johnson, Les C.; Harris, David

2008-01-01

NASA's In-Space Propulsion Technology (ISPT) Program was managed for 5 years at the NASA MSFC and significant strides were made in the advancement of key transportation technologies that will enable or enhance future robotic science and deep space exploration missions. At the program's inception, a set of technology investment priorities were established using an NASA-wide, mission-driven prioritization process and, for the most part, these priorities changed little - thus allowing a consistent framework in which to fund and manage technology development. Technologies in the portfolio included aerocapture, advanced chemical propulsion, solar electric propulsion, solar sail propulsion, electrodynamic and momentum transfer tethers, and various very advanced propulsion technologies with significantly lower technology readiness. The program invested in technologies that have the potential to revolutionize the robotic exploration of deep space. For robotic exploration and science missions, increased efficiencies of future propulsion systems are critical to reduce overall life-cycle costs and, in some cases, enable missions previously considered impossible. Continued reliance on conventional chemical propulsion alone will not enable the robust exploration of deep space - the maximum theoretical efficiencies have almost been reached and they are insufficient to meet needs for many ambitious science missions currently being considered. By developing the capability to support mid-term robotic mission needs, the program was to lay the technological foundation for travel to nearby interstellar space. The ambitious goals of the program at its inception included supporting the development of technologies that could support all of NASA's missions, both human and robotic. As time went on and budgets were never as high as planned, the scope of the program was reduced almost every year, forcing the elimination of not only the broader goals of the initial program, but also of funding for over half of the technologies in the original portfolio. In addition, the frequency at which the application requirements for the program changed exceeded the development time required to mature technologies: forcing sometimes radical rescoping of research efforts already halfway (or more) to completion. At the end of its fifth year, both the scope and funding of the program were at a minimum despite the program successfully meeting all of it's initial high priority objectives. This paper will describe the program, its requirements, technology portfolio, and technology maturation processes. Also discussed will be the major technology milestones achieved and the lessons learned from managing a $100M+ technology program.

NASA/Goddard Thermal Technology Overview 2014

NASA Technical Reports Server (NTRS)

Butler, Daniel; Swanson, Theodore D.

2014-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the Technology Development Program at NASA. While funding for basic technology development is still scarce, significant efforts are being made in direct support of flight programs. New technology development continues to be driven by the needs of future missions, and applications of these technologies to current Goddard programs will be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program, the Small Business Innovative Research (SBIR) program, and the NASA Engineering and Safety Center (NESC), are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, development of high electrical conductivity coatings, and various other research activities. New Technology program underway at NASA, although funding is limited center dot NASA/GSFC's primary mission of science satellite development is healthy and vibrant, although new missions are scarce - now have people on overhead working new missions and proposals center dot Future mission applications promise to be thermally challenging center dot Direct technology funding is still very restricted - Projects are the best source for direct application of technology - SBIR thermal subtopic resurrected in FY 14 - Limited Technology development underway via IRAD, NESC, other sources - Administrator pushing to revive technology and educational programs at NASA - new HQ directorate established

ATP Interior Noise Technology and Flight Demonstration Program

NASA Technical Reports Server (NTRS)

Stephens, David G.; Powell, Clemans A.

1988-01-01

The paper provides an overview of the ATP (Advanced Turboprop Program) acoustics program with emphasis on the NASA technology program and the recent NASA/Industry demonstration programs aimed at understanding and controlling passenger cabin noise. Technology developments in propeller (source) noise, cabin noise transmission, and subjective acoustics are described. Finally, an overview of the industry demonstrator programs is presented.

Video and Computer Technologies for Extended-Campus Programming.

ERIC Educational Resources Information Center

Sagan, Edgar L.; And Others

This paper discusses video and computer technologies for extended-campus programming (courses and programs at off-campus sites). The first section provides an overview of the distance education program at the University of Kentucky (UK), and highlights the improved access to graduate and professional programs, advances in technology, funding,…

Spinoff, 1991

NASA Technical Reports Server (NTRS)

Haggerty, James J.

1991-01-01

This is an instrument of the Technology Utilization Program and is designed to heighten awareness of the technology available for transfer and its potential for public benefit. NASA's mainline programs, whose objectives require development of new technology and therefore expand the bank of technology available for transfer in future years, are summarized. Focus is on the representative sampling of spinoffs (spinoff, in this context, means products and processes developed as secondary applications of existing NASA technology) that resulted from NASA's mainline programs. The various mechanisms NASA employs to stimulate technology transfer are described and contact sources are listed in the appendix for further information about the Technology Utilization Program.

Environmental Technology Verification Program Fact Sheet

EPA Science Inventory

This is a Fact Sheet for the ETV Program. The EPA Environmental Technology Verification Program (ETV) develops test protocols and verifies the performance of innovative technologies that have the potential to improve protection of human health and the environment. The program ...

The SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION program - Technology Profiles

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) program was created to evaluate new and promising treatment technologies for cleanup at hazardous waste sites. The mission of the SITE program is to encourage the development and routine use of innovative treatment technologie...

Control Robotics Programming Technology. Technology Learning Activity. Teacher Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This Technology Learning Activity (TLA) for control robotics programming technology in grades 6-10 is designed to teach students to construct and program computer-controlled devices using a LEGO DACTA set and computer interface and to help them understand how control technology and robotics affect them and their lifestyle. The suggested time for…

Research and technology annual report, FY 1990

NASA Technical Reports Server (NTRS)

1990-01-01

Given here is the annual report of the John C. Stennis Space Center (SSC), a NASA center responsible for testing NASA's large propulsion systems, developing supporting test technologies, conducting research in a variety of earth science disciplines, and facilitating the commercial uses of NASA-developed technologies. Described here are activities of the Earth Sciences Research Program, the Technology Development Program, commercial programs, the Technology Utilization Program, and the Information Systems Program. Work is described in such areas as forest ecosystems, land-sea interface, wetland biochemical flux, thermal imaging of crops, gas detectors, plume analysis, synthetic aperture radar, forest resource management, applications engineering, and the Earth Observations Commercial Applications Program.

2012 DOE Vehicle Technologies Program Annual Merit Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

The 2012 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting was held May 14-18, 2012 in Crystal City, Virginia. The review encompassed all of the work done by the Hydrogen Program and the Vehicle Technologies Program: a total of 309 individual activities were reviewed for Vehicle Technologies, by a total of 189 reviewers. A total of 1,473 individual review responses were received for the technical reviews.

Land degradation and improvement trends over Iberia in the last three decades

NASA Astrophysics Data System (ADS)

Gouveia, Célia M.; Páscoa, Patrícia; Russo, Ana; Trigo, Ricardo

2017-04-01

Land degradation and desertification are recognised as an important environmental and social problem in arid and semiarid regions, particularly within a climate change context. In the last three decades the entire Mediterranean basin has been affected by more frequent droughts, covering large sectors and often lasting several months. Simultaneously, the stress imposed by land management practices, such as land abandonment and intensification, highlights the need of a continuous monitoring and early detection of degradation. The Normalized Difference Vegetation Index (NDVI) from GIMMS dataset was used as an indicator of land degradation or improvement over Iberia between 1982 and 2012. The precipitation influence on NDVI was previously removed and the negative/positive trends of the obtained residuals were presumed to indicate land degradation/improvement. Overall the Iberian Peninsula is dominated by widespread land improvement with only a few hot spots of land degradation located in central and southern sectors and also in east Mediterranean and Atlantic coasts. Less than 20% of the area presenting land degradation is located within regions where land cover changes were observed, being the new land cover types associated with transitional woodland-shrub, permanent and annual crops and permanently irrigated land areas. Although being a very small fraction, the pixels of land degradation are mainly located on a semi-arid region. The monotonic changes and trend shifts present in the NDVI dataset were also assessed. The major shifts in vegetation trends and the corresponding year of occurrence were associated with the main disturbances observed in Iberia, namely the major wildfires' seasons in Portugal, and also to land abandonment and to new agricultural practices that resulted from the construction of new dams. The results obtained provide a new outlook of the real nature of degradation or improvement of vegetation in Iberia in the last three decades. Acknowledgements: This work was partially supported by national funds through FCT (Fundação para a Ciência e a Tecnologia, Portugal) under project IMDROFLOOD (WaterJPI/0004/2014). Ana Russo thanks FCT for granted support (SFRH/BPD/99757/2014).

The Streptococcus pyogenes serotype M49 Nra-Ralp3 transcriptional regulatory network and its control of virulence factor expression from the novel eno ralp3 epf sagA pathogenicity region.

PubMed

Kreikemeyer, Bernd; Nakata, Masanobu; Köller, Thomas; Hildisch, Hendrikje; Kourakos, Vassilios; Standar, Kerstin; Kawabata, Shigetada; Glocker, Michael O; Podbielski, Andreas

2007-12-01

Many Streptococcus pyogenes (group A streptococcus [GAS]) virulence factor- and transcriptional regulator-encoding genes cluster together in discrete genomic regions. Nra is a central regulator of the FCT region. Previous studies exclusively described Nra as a transcriptional repressor of adhesin and toxin genes. Here transcriptome and proteome analysis of a serotype M49 GAS strain and an isogenic Nra mutant of this strain revealed the complete Nra regulon profile. Nra is active in all growth phases tested, with the largest regulon in the transition phase. Almost exclusively, virulence factor-encoding genes are repressed by Nra; these genes include the GAS pilus operon, the capsule synthesis operon, the cytolysin-mediated translocation system genes, all Mga region core virulence genes, and genes encoding other regulators, like the Ihk/Irr system, Rgg, and two additional RofA-like protein family regulators. Surprisingly, our experiments revealed that Nra additionally acts as a positive regulator, mostly for genes encoding proteins and enzymes with metabolic functions. Epidemiological investigations revealed strong genetic linkage of one particular Nra-repressed regulator, Ralp3 (SPy0735), with a gene encoding Epf (extracellular protein factor from Streptococcus suis). In a serotype-specific fashion, this ralp3 epf gene block is integrated, most likely via transposition, into the eno sagA virulence gene block, which is present in all GAS serotypes. In GAS serotypes M1, M4, M12, M28, and M49 this novel discrete genetic region is therefore designated the eno ralp3 epf sagA (ERES) pathogenicity region. Functional experiments showed that Epf is a novel GAS plasminogen-binding protein and revealed that Ralp3 activity counteracts Nra and MsmR regulatory activity. In addition to the Mga and FCT regions, the ERES region is the third discrete chromosomal pathogenicity region. All of these regions are transcriptionally linked, adding another level of complexity to the known GAS growth phase-dependent regulatory network.

The Streptococcus pyogenes Serotype M49 Nra-Ralp3 Transcriptional Regulatory Network and Its Control of Virulence Factor Expression from the Novel eno ralp3 epf sagA Pathogenicity Region▿ †

PubMed Central

Kreikemeyer, Bernd; Nakata, Masanobu; Köller, Thomas; Hildisch, Hendrikje; Kourakos, Vassilios; Standar, Kerstin; Kawabata, Shigetada; Glocker, Michael O.; Podbielski, Andreas

2007-01-01

Many Streptococcus pyogenes (group A streptococcus [GAS]) virulence factor- and transcriptional regulator-encoding genes cluster together in discrete genomic regions. Nra is a central regulator of the FCT region. Previous studies exclusively described Nra as a transcriptional repressor of adhesin and toxin genes. Here transcriptome and proteome analysis of a serotype M49 GAS strain and an isogenic Nra mutant of this strain revealed the complete Nra regulon profile. Nra is active in all growth phases tested, with the largest regulon in the transition phase. Almost exclusively, virulence factor-encoding genes are repressed by Nra; these genes include the GAS pilus operon, the capsule synthesis operon, the cytolysin-mediated translocation system genes, all Mga region core virulence genes, and genes encoding other regulators, like the Ihk/Irr system, Rgg, and two additional RofA-like protein family regulators. Surprisingly, our experiments revealed that Nra additionally acts as a positive regulator, mostly for genes encoding proteins and enzymes with metabolic functions. Epidemiological investigations revealed strong genetic linkage of one particular Nra-repressed regulator, Ralp3 (SPy0735), with a gene encoding Epf (extracellular protein factor from Streptococcus suis). In a serotype-specific fashion, this ralp3 epf gene block is integrated, most likely via transposition, into the eno sagA virulence gene block, which is present in all GAS serotypes. In GAS serotypes M1, M4, M12, M28, and M49 this novel discrete genetic region is therefore designated the eno ralp3 epf sagA (ERES) pathogenicity region. Functional experiments showed that Epf is a novel GAS plasminogen-binding protein and revealed that Ralp3 activity counteracts Nra and MsmR regulatory activity. In addition to the Mga and FCT regions, the ERES region is the third discrete chromosomal pathogenicity region. All of these regions are transcriptionally linked, adding another level of complexity to the known GAS growth phase-dependent regulatory network. PMID:17893125

Water Quality Monitoring of Inland Waters using Meris data

NASA Astrophysics Data System (ADS)

Potes, M.; Costa, M. J.; Salgado, R.; Le Moigne, P.

2012-04-01

The successful launch of ENVISAT in March 2002 has given a great opportunity to understand the optical changes of water surfaces, including inland waters such as lakes and reservoirs, through the use of the Medium Resolution Imaging Spectrometer (MERIS). The potential of this instrument to describe variations of optically active substances has been examined in the Alqueva reservoir, located in the south of Portugal, where satellite spectral radiances are corrected for the atmospheric effects to obtain the surface spectral reflectance. In order to validate this spectral reflectance, several field campaigns were carried out, with a portable spectroradiometer, during the satellite overpass. The retrieved lake surface spectral reflectance was combined with limnological laboratory data and with the resulting algorithms, spatial maps of biological quantities and turbidity were obtained, allowing for the monitoring of these water quality indicators. In the framework of the recent THAUMEX 2011 field campaign performed in Thau lagoon (southeast of France) in-water radiation, surface irradiation and reflectance measurements were taken with a portable spectrometer in order to test the methodology described above. At the same time, water samples were collected for laboratory analysis. The two cases present different results related to the geographic position, water composition, environment, resources exploration, etc. Acknowledgements This work is financed through FCT grant SFRH/BD/45577/2008 and through FEDER (Programa Operacional Factores de Competitividade - COMPETE) and National funding through FCT - Fundação para a Ciência e a Tecnologia in the framework of projects FCOMP-01-0124-FEDER-007122 (PTDC / CTE-ATM / 65307 / 2006) and FCOMP-01-0124-FEDER-009303 (PTDC/CTE-ATM/102142/2008). Image data has been provided by ESA in the frame of ENVISAT projects AOPT-2423 and AOPT-2357. We thank AERONET investigators for their effort in establishing and maintaining Évora AERONET site. We also thank the Water Laboratory of the University of Évora for support in the field campaigns, EDIA and IFREMER (Institut Français de Recherche pour le Exploitation de la Mer) for providing the water quality data used in this work.

Matrix vesicles in the fibrous cap of atherosclerotic plaque: possible contribution to plaque rupture.

PubMed

Bobryshev, Y V; Killingsworth, M C; Lord, R S A; Grabs, A J

2008-10-01

Plaque rupture is the most common type of plaque complication and leads to acute ischaemic events such as myocardial infarction and stroke. Calcification has been suggested as a possible indicator of plaque instability. Although the role of matrix vesicles in the initial stages of arterial calcification has been recognized, no studies have yet been carried out to examine a possible role of matrix vesicles in plaque destabilization. Tissue specimens selected for the present study represented carotid specimens obtained from patients undergoing carotid endarterectomy. Serial frozen cross-sections of the tissue specimens were cut and mounted on glass slides. The thickness of the fibrous cap (FCT) in each advanced atherosclerotic lesion, containing a well developed lipid/necrotic core, was measured at its narrowest sites in sets of serial sections. According to established criteria, atherosclerotic plaque specimens were histologically subdivided into two groups: vulnerable plaques with thin fibrous caps (FCT <100 microm) and presumably stable plaques, in which fibrous caps were thicker than 100 microm. Twenty-four carotid plaques (12 vulnerable and 12 presumably stable plaques) were collected for the present analysis of matrix vesicles in fibrous caps. In order to provide a sufficient number of representative areas from each plaque, laser capture microdissection (LCM) was carried out. The quantification of matrix vesicles in ultrathin sections of vulnerable and stable plaques revealed that the numbers of matrix vesicles were significantly higher in fibrous caps of vulnerable plaques than those in stable plaques (8.908+0.544 versus 6.208+0.467 matrix vesicles per 1.92 microm2 standard area; P= 0.0002). Electron microscopy combined with X-ray elemental microanalysis showed that some matrix vesicles in atherosclerotic plaques were undergoing calcification and were characterized by a high content of calcium and phosphorus. The percentage of calcified matrix vesicles/microcalcifications was significantly higher in fibrous caps in vulnerable plaques compared with that in stable plaques (6.705+/-0.436 versus 5.322+/-0494; P= 0.0474). The findings reinforce a view that the texture of the extracellular matrix in the thinning fibrous cap of atherosclerotic plaque is altered and this might contribute to plaque destabilization.

Theme: Emerging Technologies.

ERIC Educational Resources Information Center

Malpiedi, Barbara J.; And Others

1989-01-01

Consists of six articles discussing the effect of emerging technologies on agriculture. Specific topics include (1) agriscience programs, (2) the National Conference on Agriscience and Emerging Occupations and Technologies, (3) biotechnology, (4) program improvement through technology, (5) the Agriscience Teacher of the Year program, and (6)…

75 FR 64692 - Green Technology Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... DEPARTMENT OF COMMERCE Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed...- 0062 Green Technology Pilot Program comment'' in the subject line of the message. Fax: 571-273-0112... permits patent applications pertaining to green technologies, including greenhouse gas reduction, to be...

Defense Science Board Task Force on The Manufacturing Technology Program: A Key to Affordably Equipping the Future Force

DTIC Science & Technology

2006-02-01

technology for cost and risk reduction of products, software, and processes; long-term, multi-Service needs; and disruptive technologies , both...initiatives and for disruptive technologies , the Office of the Secretary of Defense (OSD) can better promote the importance and value of the program...multi- Service programs, research in “ disruptive ” technologies , and SBIR programs. Balance current, near term, and future needs as well as small and

State investments in high-technology job growth.

PubMed

Leicht, Kevin T; Jenkins, J Craig

2017-07-01

Since the early 1970's state and local governments have launched an array of economic development programs designed to promote high-technology development. The question our analysis addresses is whether these programs promote long-term high-technology employment growth net of state location and agglomeration advantages. Proponents talk about an infrastructure strategy that promotes investment in public research and specialized infrastructure to attract and grow new high technology industries in specific locations, and a more decentralized entrepreneurial strategy that reinforces local agglomeration capacities by investing in new enterprises and products, promoting the development of local networks and partnerships. Our results support the entrepreneurial strategy, suggesting that state governments can accelerate high technology development by adopting market-supportive programs that complement private sector initiatives. In addition to positive direct benefits of technology deployment/transfer programs and SBIR programs, entrepreneurial programs affect change in high-technology employment in concert with existing locational and agglomeration advantages. Rural (i.e. low population density) states tend to benefit by technology development programs. Infrastructure strategy programs also facilitate high technology job growth in places where local advantages already exist. Our results suggest that critics of industrial policy are correct that high technology growth is organic and endogenous, yet state governments are able to "pick winners and losers" in ways that grow their local economy. Copyright © 2017 Elsevier Inc. All rights reserved.

Small engine technology programs

NASA Technical Reports Server (NTRS)

Niedzwiecki, Richard W.

1990-01-01

Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

Evaluation of the Advanced Subsonic Technology Program Noise Reduction Benefits

NASA Technical Reports Server (NTRS)

Golub, Robert A.; Rawls, John W., Jr.; Russell, James W.

2005-01-01

This report presents a detailed evaluation of the aircraft noise reduction technology concepts developed during the course of the NASA/FAA Advanced Subsonic Technology (AST) Noise Reduction Program. In 1992, NASA and the FAA initiated a cosponsored, multi-year program with the U.S. aircraft industry focused on achieving significant advances in aircraft noise reduction. The program achieved success through a systematic development and validation of noise reduction technology. Using the NASA Aircraft Noise Prediction Program, the noise reduction benefit of the technologies that reached a NASA technology readiness level of 5 or 6 were applied to each of four classes of aircraft which included a large four engine aircraft, a large twin engine aircraft, a small twin engine aircraft and a business jet. Total aircraft noise reductions resulting from the implementation of the appropriate technologies for each class of aircraft are presented and compared to the AST program goals.

Study of Federal technology transfer activities in areas of interest to NASA Office of Space and Terrestrial Applications

NASA Technical Reports Server (NTRS)

Madigan, J. A.; Earhart, R. W.

1978-01-01

Forty-three ongoing technology transfer programs in Federal agencies other than NASA were selected from over 200 current Federal technology transfer activities. Selection was made and specific technology transfer mechanisms utilized. Detailed information was obtained on the selected programs by reviewing published literature, and conducting telephone interviews with each program manager. Specific information collected on each program includes technology areas; user groups, mechanisms employed, duration of program, and level of effort. Twenty-four distinct mechanisms are currently employed in Federal technology transfer activities totaling $260 million per year. Typical applications of each mechanism were reviewed, and caveats on evaluating program effectiveness were discussed. A review of recent federally funded research in technology transfer to state and local governments was made utilizing the Smithsonian Science Information Exchange, and abstracts of interest to NASA were selected for further reference.

Physics of the Cosmos Program Annual Technology Report

NASA Technical Reports Server (NTRS)

Pham, Bruce Thai; Cardiff, Ann H.

2015-01-01

What's in this Report? What's New? This fifth Program Annual Technology Report (PATR) summarizes the Programs technology development activities for fiscal year (FY) 2015. The PATR serves four purposes.1. Summarize the technology gaps identified by the astrophysics community;2. Present the results of this years technology gap prioritization by the PCOS Technology Management Board (TMB);3. Report on newly funded PCOS Strategic Astrophysics Technology (SAT) projects; and4. Detail progress, current status, and activities planned for the coming year for all technologies supported by PCOS Supporting Research and Technology (SRT) funding in FY 2015. .

Effects of a Technology-Friendly Education Program on Pre-Service Teachers' Perceptions and Learning Styles

ERIC Educational Resources Information Center

Kim, Dong-Joong; Choi, Sang-Ho

2016-01-01

A technology-friendly teacher education program can make pre-service teachers more comfortable with using technology from laggard to innovator and change their learning styles in which they prefer the use of technology in teaching. It is investigated how a technology-friendly mathematics education program, which provided 49 pre-service teachers an…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: PROGRESS AND ACCOMPLISHMENTS - FISCAL YEAR 1991

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) program was the first major program for demonstrating and evaluating full-scale innovative treatment technologies at hazardous waste sites. Having concluded its fifth year, the SITE program is recognized as a leading advocate ...

Dental Laboratory Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

U.S. ENVIRONMENTAL PROTECTION AGENCY'S SITE EMERGING TECHNOLOGY PROGRAM: 1991 UPDATE

EPA Science Inventory

The Emerging Technology Program (ETP) supports the development of technologies successfully tested at the bench- and pilot-scale level. The ETP is part of the Superfund Innovative Technology Evaluation (SITE) Program which was established in 1986 under the Superfund Amendments an...

2013 Building Technologies Office Program Peer Review Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2013-11-01

The 2013 Building Technologies Office Program Peer Review Report summarizes the results of the 2013 Building Technologies Office (BTO) peer review, which was held in Washington, D.C., on April 2–4, 2013. The review was attended by over 300 participants and included presentations on 59 BTO-funded projects: 29 from BTO’s Emerging Technologies Program, 20 from the Commercial Buildings Integration Program, 6 from the Residential Buildings Integration Program, and 4 from the Building Energy Codes Program. This report summarizes the scores and comments provided by the independent reviewers for each project.

Technology advancements for the U.S. manned Space Station - An overview

NASA Technical Reports Server (NTRS)

Simon, William E.

1987-01-01

The structure and methodology of the Johnson Space Center (JSC) advanced development program is described. An overview of the program is given, and the technology transfer process to other disciplines is described. The test bed and flight experiment programs are described, as is the technology assessment which was performed at the end of the Phase B program. The technology program within each discipline is summarized, and the coordination and integration of the JSC program with the activities of other NASA centers and with work package contractors are discussed.

Controls-Structures Interaction (CSI) technology program summary. Earth orbiting platforms program area of the space platforms technology program

NASA Technical Reports Server (NTRS)

Newsom, Jerry R.

1991-01-01

Control-Structures Interaction (CSI) technology embraces the understanding of the interaction between the spacecraft structure and the control system, and the creation and validation of concepts, techniques, and tools, for enabling the interdisciplinary design of an integrated structure and control system, rather than the integration of a structural design and a control system design. The goal of this program is to develop validated CSI technology for integrated design/analysis and qualification of large flexible space systems and precision space structures. A description of the CSI technology program is presented.

The NASA technology push towards future space mission systems

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.; Povinelli, Frederick P.; Rosen, Robert

1988-01-01

As a result of the new Space Policy, the NASA technology program has been called upon to a provide a solid base of national capabilities and talent to serve NASA's civil space program, commercial, and other space sector interests. This paper describes the new technology program structure and its characteristics, traces its origin and evolution, and projects the likely near- and far-term strategic steps. It addresses the alternative 'push-pull' approaches to technology development, the readiness levels to which the technology needs to be developed for effective technology transfer, and the focused technology programs currently being implemented to satisfy the needs of future space systems.

User needs as a basis for advanced technology. [U.S. civil space program

NASA Technical Reports Server (NTRS)

Mankins, John C.; Reck, Gregory M.

1992-01-01

The NASA Integrated Technology Plan (ITP) is described with treatment given to the identification of U.S. technology needs, space research and technology programs, and some ITP implementations. The ITP is based on the development and transfer of technologies relevant to the space program that also have significant implications for general technological research. Among the areas of technological research identified are: astrophysics, earth sciences, microgravity, and space physics. The Office of Space Science and Applications prioritizes the technology needs in three classes; the highest priority is given to submm and microwave technologies for earth sciences and astrophysics study. Other government and commercial needs are outlined that include cryogenic technologies, low-cost engines, advanced data/signal processing, and low-cost ELVs. It is demonstrated that by identifying and addressing these areas of user technology needs NASA's research and technology program can enhance U.S. trade and industrial competitiveness.

Component technology for stirling power converters

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

1991-01-01

NASA Lewis Research Center has organized a component technology program as part of the efforts to develop Stirling converter technology for space power applications. The Stirling Space Power Program is part of the NASA High Capacity Power Project of the Civil Space Technology Initiative (CSTI). NASA Lewis is also providing technical management for the DOE/Sandia program to develop Stirling converters for solar terrestrial power producing electricity for the utility grid. The primary contractors for the space power and solar terrestrial programs develop component technologies directly related to their goals. This Lewis component technology effort, while coordinated with the main programs, aims at longer term issues, advanced technologies, and independent assessments. An overview of work on linear alternators, engine/alternator/load interactions and controls, heat exchangers, materials, life and reliability, and bearings is presented.

NASA Goddard Thermal Technology Overview 2018

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2018-01-01

This presentation summarizes the current plans and efforts at NASA/Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently submitted NASA budget will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of thermal control coatings, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

Research and technology operating plan summary: Fiscal year 1975 research and technology program. [space programs, energy technology, and aerospace sciences

NASA Technical Reports Server (NTRS)

1975-01-01

Summaries are presented of Research and Technology Operating Plans currently in progress throughout NASA. Citations and abstracts of the operating plans are presented along with a subject index, technical monitor index, and responsible NASA organization index. Research programs presented include those carried out in the Office of Aeronautics and Space Technology, Office of Energy Programs, Office of Applications, Office of Space Sciences, Office of Tracking and Data Acquisition, and the Office of Manned Space Flight.

ESTIMATING INNOVATIVE TECHNOLOGY COSTS FOR THE SITE PROGRAM

EPA Science Inventory

Among the objectives of the EPA`s Superfund Innovative Technology Evaluation (SITE) Program are two which pertain to the issue of economics: 1) That the program will provide a projected cost for each treatment technology demonstrated. 2) That the program will attempt to identify ...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

Transferring new technologies within the federal sector: The New Technology Demonstration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conover, D.R.; Hunt, D.M.

1994-08-01

The federal sector is the largest consumer of products in the United States and annually purchases almost 1.5 quads of energy measured at the building site at a cost of almost $10 billion (U.S. Department of Energy 1991). A review of design, construction, and procurement practices in the federal sector, as well as discussions with manufacturers and vendors, indicated that new technologies are not utilized in as timely a manner as possible. As a consequence of this technology transfer lag, the federal sector loses valuable energy and environmental benefits that can be derived through the application of new technologies. Inmore » addition, opportunities are lost to reduce federal energy expenditures and spur U.S. economic growth through the procurement of such technologies. In 1990, under the direction of the U.S. Department of Energy (DOE) Federal Energy Management Program, the Pacific Northwest Laboratory began the design of a program to accelerate the introduction of new U.S. technologies into the federal sector. Designated first as the Test Bed Demonstration Program and more recently the New Technology Demonstration Program, it sought to shorten the acceptance period of new technologies within the federal sector. By installing and evaluating various new technologies at federal facilities, the Program attempts to increase the acceptance of those new technologies through the results of {open_quotes}real-world{close_quotes} federal installations. Since that time, the Program has conducted new technology demonstrations and evaluations, evolved to address the need for more timely information transfer, and explored collaborative opportunities with other DOE offices and laboratories. This paper explains the processes by which a new technology demonstration project is implemented and presents a general description of the Program results to date.« less

COST EVALUATION STRATEGIES FOR TECHNOLOGIES TESTED UNDER THE ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

This document provides a general set of guidelines that may be consistently applied for collecting, evaluation, and reporting the costs of technologies tested under the ETV Program. Because of the diverse nature of the technologies and industries covered in this program, each ETV...

77 FR 46909 - Small Business Innovation Research (SBIR) Program and Small Business Technology Transfer (STTR...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-06

... Technology Transfer (STTR) Program Policy Directives AGENCY: U.S. Small Business Administration. ACTION...) and Small Business Technology Transfer Program (STTR) Policy Directives. These amendments implement... to Edsel Brown, Assistant Director, Office of Technology, U.S. Small Business Administrator, 409...

Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

NASA Technical Reports Server (NTRS)

Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

2015-01-01

Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate. This paper will provide a brief status of the pre-InVEST CubeSats, and discuss the development and status of the InVEST program. Figure

Two Inseparable Facets of Technology Integration Programs: Technology and Theoretical Framework

ERIC Educational Resources Information Center

Demir, Servet

2011-01-01

This paper considers the process of program development aiming at technology integration for teachers. For this consideration, the paper focused on an integration program which was recently developed as part of a larger project. The participants of this program were 45 in-service teachers. The program continued four weeks and the conduct of the…

Balanced program plan: analysis for biomedical and environmental research. Volume 5. Oil shale technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-06-01

Oil shale technology has been divided into two sub-technologies: surfaceprocessing and in-situ processing. Definition of the research programs is essentially an amplification of the five King-Muir categories: (A) pollutants: characterization, measurement, and monitoring; (B) physical and chemical processes and effects; (C) health effects; (D) ecological processes and effects; and (E) integrated assessment. Twenty-three biomedical and environmental research projects are described as to program title, scope, milestones, technology time frame, program unit priority, and estimated program unit cost.

Next Generation Launch Technology Program Lessons Learned

NASA Technical Reports Server (NTRS)

Cook, Stephen; Tyson, Richard

2005-01-01

In November 2002, NASA revised its Integrated Space Transportation Plan (ISTP) to evolve the Space Launch Initiative (SLI) to serve as a theme for two emerging programs. The first of these, the Orbital Space Plane (OSP), was intended to provide crew-escape and crew-transfer functions for the ISS. The second, the NGLT Program, developed technologies needed for safe, routine space access for scientific exploration, commerce, and national defense. The NGLT Program was comprised of 12 projects, ranging from fundamental high-temperature materials research to full-scale engine system developments (turbine and rocket) to scramjet flight test. The Program included technology advancement activities with a broad range of objectives, ultimate applications/timeframes, and technology maturity levels. An over-arching Systems Engineering and Analysis (SE&A) approach was employed to focus technology advancements according to a common set of requirements. Investments were categorized into three segments of technology maturation: propulsion technologies, launch systems technologies, and SE&A.

Surgical Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This surgical technology program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a surgical technology program. The program guide is designed to relate primarily to the development of those skills needed by individuals in the field to provide services in the…

Variable Cycle Engine Technology Program Planning and Definition Study

NASA Technical Reports Server (NTRS)

Westmoreland, J. S.; Stern, A. M.

1978-01-01

The variable stream control engine, VSCE-502B, was selected as the base engine, with the inverted flow engine concept selected as a backup. Critical component technologies were identified, and technology programs were formulated. Several engine configurations were defined on a preliminary basis to serve as demonstration vehicles for the various technologies. The different configurations present compromises in cost, technical risk, and technology return. Plans for possible variably cycle engine technology programs were formulated by synthesizing the technology requirements with the different demonstrator configurations.

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2014 CFR

2014-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2013 CFR

2013-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2010 CFR

2010-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2011 CFR

2011-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2012 CFR

2012-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

Using Technology to Enhance an Automotive Program

ERIC Educational Resources Information Center

Ashton, Denis

2009-01-01

Denis Ashton uses technology in his automotive technology program at East Valley Institute of Technology (EVIT) to positively impact student outcomes. Ashton, the department chair for the automotive programs at EVIT, in Mesa, Arizona, says that using an interactive PowerPoint curriculum makes learning fun for students and provides immediate…

Using Technology To Promote Your Guidance and Counseling Program among Stake Holders.

ERIC Educational Resources Information Center

Sabella, Russell A.; Booker, Beverly L.

2003-01-01

Focuses on the use of technology to promote guidance and counseling programs among stakeholders. Details the significance of promoting comprehensive guidance and counseling programs and examples of technology tools used for persuasive communication. Discusses the advantages and disadvantages of using technology to promote a school counseling…

EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-09-01

September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

EERE Wind and Hydropower Technologies Program Technology Review (Deep Dive) for Under Secretaries Johnson and Koonin

DOE Office of Scientific and Technical Information (OSTI.GOV)

McCluer, Megan

2009-09-04

September 4, 2009 presentation highlighting the Wind and Hydropower Program, addressing program goals and objectives, budgets, technology pathways, breakthroughs, and DOE solutions to market barriers.

MLS student active learning within a "cloud" technology program.

PubMed

Tille, Patricia M; Hall, Heather

2011-01-01

In November 2009, the MLS program in a large public university serving a geographically large, sparsely populated state instituted an initiative for the integration of technology enhanced teaching and learning within the curriculum. This paper is intended to provide an introduction to the system requirements and sample instructional exercises used to create an active learning technology-based classroom. Discussion includes the following: 1.) define active learning and the essential components, 2.) summarize teaching methods, technology and exercises utilized within a "cloud" technology program, 3.) describe a "cloud" enhanced classroom and programming 4.) identify active learning tools and exercises that can be implemented into laboratory science programs, and 5.) describe the evaluation and assessment of curriculum changes and student outcomes. The integration of technology in the MLS program is a continual process and is intended to provide student-driven active learning experiences.

Space technology research plans

NASA Technical Reports Server (NTRS)

Hook, W. Ray

1992-01-01

Development of new technologies is the primary purpose of the Office of Aeronautics and Space Technology (OAST). OAST's mission includes the following two goals: (1) to conduct research to provide fundamental understanding, develop advanced technology and promote technology transfer to assure U.S. preeminence in aeronautics and to enhance and/or enable future civil space missions: and (2) to provide unique facilities and technical expertise to support national aerospace needs. OAST includes both NASA Headquarters operations as well as programmatic and institutional management of the Ames Research Center, the Langley Research Center and the Lewis Research Center. In addition. a considerable portion of OAST's Space R&T Program is conducted through the flight and science program field centers of NASA. Within OAST, the Space Technology Directorate is responsible for the planning and implementation of the NASA Space Research and Technology Program. The Space Technology Directorate's mission is 'to assure that OAST shall provide technology for future civil space missions and provide a base of research and technology capabilities to serve all national space goals.' Accomplishing this mission entails the following objectives: y Identify, develop, validate and transfer technology to: (1) increase mission safety and reliability; (2) reduce flight program development and operations costs; (3) enhance mission performance; and (4) enable new missions. Provide the capability to: (1) advance technology in critical disciplines; and (2) respond to unanticipated mission needs. In-space experiments are an integral part of OAST's program and provides for experimental studies, development and support for in-space flight research and validation of advanced space technologies. Conducting technology experiments in space is a valuable and cost effective way to introduce advanced technologies into flight programs. These flight experiments support both the R&T base and the focussed programs within OAST.

Transportation technology program: Strategic plan

NASA Astrophysics Data System (ADS)

1991-09-01

The purpose of this report is to define the technology program required to meet the transportation technology needs for current and future civil space missions. It is a part of an integrated plan, prepared by NASA in part in response to the Augustine Committee recommendations, to describe and advocate expanded and more aggressive efforts in the development of advanced space technologies. This expanded program will provide a technology basis for future space missions to which the U.S. aspires, and will help to regain technology leadership for the U.S. on a broader front. The six aspects of this integrated program/plan deal with focused technologies to support space sciences, exploration, transportation, platforms, and operations as well as provide a Research and Technology Base Program. This volume describes the technologies needed to support transportation systems, e.g., technologies needed for upgrades to current transportation systems and to provide reliable and efficient transportation for future space missions. The Office of Aeronautics, Exploration, and Technology (OAET) solicited technology needs from the major agency technology users and the aerospace industry community and formed a transportation technology team (appendix A) to develop a technology program to respond to those needs related to transportation technologies. This report addresses the results of that team activity. It is a strategic plan intended for use as a planning document rather than as a project management tool. It is anticipated that this document will be primarily utilized by research & technology (R&T) management at the various NASA Centers as well as by officials at NASA Headquarters and by industry in planning their corporate Independent Research and Development (IR&D) investments.

Transportation technology program: Strategic plan

NASA Technical Reports Server (NTRS)

1991-01-01

The purpose of this report is to define the technology program required to meet the transportation technology needs for current and future civil space missions. It is a part of an integrated plan, prepared by NASA in part in response to the Augustine Committee recommendations, to describe and advocate expanded and more aggressive efforts in the development of advanced space technologies. This expanded program will provide a technology basis for future space missions to which the U.S. aspires, and will help to regain technology leadership for the U.S. on a broader front. The six aspects of this integrated program/plan deal with focused technologies to support space sciences, exploration, transportation, platforms, and operations as well as provide a Research and Technology Base Program. This volume describes the technologies needed to support transportation systems, e.g., technologies needed for upgrades to current transportation systems and to provide reliable and efficient transportation for future space missions. The Office of Aeronautics, Exploration, and Technology (OAET) solicited technology needs from the major agency technology users and the aerospace industry community and formed a transportation technology team (appendix A) to develop a technology program to respond to those needs related to transportation technologies. This report addresses the results of that team activity. It is a strategic plan intended for use as a planning document rather than as a project management tool. It is anticipated that this document will be primarily utilized by research & technology (R&T) management at the various NASA Centers as well as by officials at NASA Headquarters and by industry in planning their corporate Independent Research and Development (IR&D) investments.

Healthcare technologies, quality improvement programs and hospital organizational culture in Canadian hospitals

PubMed Central

2013-01-01

Background Healthcare technology and quality improvement programs have been identified as a means to influence healthcare costs and healthcare quality in Canada. This study seeks to identify whether the ability to implement healthcare technology by a hospital was related to usage of quality improvement programs within the hospital and whether the culture within a hospital plays a role in the adoption of quality improvement programs. Methods A cross-sectional study of Canadian hospitals was conducted in 2010. The sample consisted of hospital administrators that were selected by provincial review boards. The questionnaire consisted of 3 sections: 20 healthcare technology items, 16 quality improvement program items and 63 culture items. Results Rasch model analysis revealed that a hierarchy existed among the healthcare technologies based upon the difficulty of implementation. The results also showed a significant relationship existed between the ability to implement healthcare technologies and the number of quality improvement programs adopted. In addition, culture within a hospital served a mediating role in quality improvement programs adoption. Conclusions Healthcare technologies each have different levels of difficulty. As a consequence, hospitals need to understand their current level of capability before selecting a particular technology in order to assess the level of resources needed. Further the usage of quality improvement programs is related to the ability to implement technology and the culture within a hospital. PMID:24119419

NASA's Physics of the Cosmos and Cosmic Origins programs manage Strategic Astrophysics Technology (SAT) development

NASA Astrophysics Data System (ADS)

Pham, Thai; Thronson, Harley; Seery, Bernard; Ganel, Opher

2016-07-01

The strategic astrophysics missions of the coming decades will help answer the questions "How did our universe begin and evolve?" "How did galaxies, stars, and planets come to be?" and "Are we alone?" Enabling these missions requires advances in key technologies far beyond the current state of the art. NASA's Physics of the Cosmos2 (PCOS), Cosmic Origins3 (COR), and Exoplanet Exploration Program4 (ExEP) Program Offices manage technology maturation projects funded through the Strategic Astrophysics Technology (SAT) program to accomplish such advances. The PCOS and COR Program Offices, residing at the NASA Goddard Space Flight Center (GSFC), were established in 2011, and serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the Programs' technology development activities and the current technology investment portfolio of 23 technology advancements. We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The Programs' priorities are driven by strategic direction from the Astrophysics Division, which is informed by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) 2010 Decadal Survey report [1], the Astrophysics Implementation Plan (AIP) [2] as updated, and the Astrophysics Roadmap "Enduring Quests, Daring Visions" [3]. These priorities include technology development for missions to study dark energy, gravitational waves, X-ray and inflation probe science, and large far-infrared (IR) and ultraviolet (UV)/optical/IR telescopes to conduct imaging and spectroscopy studies. The SAT program is the Astrophysics Division's main investment method to mature technologies that will be identified by study teams set up to inform the 2020 Decadal Survey process on several large astrophysics mission concepts.

ADDENDUM TO SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM TECHNOLOGY PROFILES, TENTH EDITION, VOLUME 1 - DEMONSTRATION PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program, now in its thirteenth year, is an integral part of EPA's research into alternative cleanup methods for hazardous waste sites around the nation. The SITE Program was created to encourage the development and routine us...

Electronic Engineering Technology Program Exit Examination as an ABET and Self-Assessment Tool

ERIC Educational Resources Information Center

Thomas, Gary; Darayan, Shahryar

2018-01-01

Every engineering, computing, and engineering technology program accredited by the Accreditation Board for Engineering and Technology (ABET) has formulated many and varied self-assessment methods. Methods used to assess a program for ABET accreditation and continuous improvement are for keeping programs current with academic and industrial…

THE SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: PROGRESS AND ACCOMPLISHMENTS - FISCAL YEAR 1990 A FOURTH REPORT TO CONGRESS

EPA Science Inventory

The SITE Program was the first major program for demonstrating and evaluating fullscale innovative treatment technologies at hazardous waste sites. Having concluded its fourth year, the SITE Program is recognized as a leading advocate of innovative technology development and comm...

Demographic Survey of Female Faculty in Technology Education Programs.

ERIC Educational Resources Information Center

Heidari, Farzin

A study was conducted to determine the general program information and the demographic status of female faculty in four-year technology education programs in the United States. Information was gathered through a literature review and a questionnaire mailed to all 70 technology education programs listed in the 1994 International Technology…

Successful Examples of Instructional Technology in Higher Education.

ERIC Educational Resources Information Center

Hortin, John A.

College programs considered to be successful in their use of instructional technology are described. The definition of instructional technology used to judge the media programs is as follows: a systematic approach to improve learning through media management, educational program development, and learning resources. Programs include the following:…

78 FR 8992 - Energy Conservation Program: Test Procedures for Residential Clothes Dryers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

... Energy, Building Technologies Program, Mailstop EE-2J, 1000 Independence Avenue SW., Washington, DC 20585... Technologies Program, 6th Floor, 950 L'Enfant Plaza SW., Washington, DC 20024. Telephone: (202) 586-2945. If... and Renewable Energy, Building Technologies Program, EE-2J, 1000 Independence Avenue SW., Washington...

Raising awareness of assistive technology in older adults through a community-based, cooperative extension program.

PubMed

Sellers, Debra M; Markham, Melinda Stafford

2012-01-01

The Fashion an Easier Lifestyle with Assistive Technology (FELAT) curriculum was developed as a needs-based, community educational program provided through a state Cooperative Extension Service. The overall goal for participants was to raise awareness of assistive technology. Program evaluation included a postassessment and subsequent interview to determine short-term knowledge gain and longer term behavior change. The sample consisted of mainly older, married females. The FELAT program was effective at raising awareness and increasing knowledge of assistive technology, and for many participants, the program acted as a catalyst for planning to or taking action related to assistive technology.

ODIN system technology module library, 1972 - 1973

NASA Technical Reports Server (NTRS)

Hague, D. S.; Watson, D. A.; Glatt, C. R.; Jones, R. T.; Galipeau, J.; Phoa, Y. T.; White, R. J.

1978-01-01

ODIN/RLV is a digital computing system for the synthesis and optimization of reusable launch vehicle preliminary designs. The system consists of a library of technology modules in the form of independent computer programs and an executive program, ODINEX, which operates on the technology modules. The technology module library contains programs for estimating all major military flight vehicle system characteristics, for example, geometry, aerodynamics, economics, propulsion, inertia and volumetric properties, trajectories and missions, steady state aeroelasticity and flutter, and stability and control. A general system optimization module, a computer graphics module, and a program precompiler are available as user aids in the ODIN/RLV program technology module library.

Research and technology: 1994 annual report of the John F. Kennedy Space Center

NASA Technical Reports Server (NTRS)

1994-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, the John F. Kennedy Space Center is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the Engineering Development Directorate laboratories, most of the KSC operations contractors, academia, and selected commercial industries - all working in a team effort within their own areas of expertise. This edition of the Kennedy Space Center Research and Technology 1994 Annual Report covers efforts of all these contributors to the KSC advanced technology development program, as well as our technology transfer activities. The Technology Programs and Commercialization Office (DE-TPO), (407) 867-3017, is responsible for publication of this report and should be contacted for any desired information regarding the advanced technology program.

CSTI high capacity power. [Civil Space Technology Initiative

NASA Technical Reports Server (NTRS)

Winter, Jerry M.

1989-01-01

In FY-88, the Advanced Technology Program was incorporated into NASA's Civil Space Technology Initiative (CSTI). The CSTI Program was established to provide the foundation for technology development in automation and robotics, information, propulsion, and power. The CSTI High Capacity Power Program builds on the technology efforts of the SP-100 program, incorporates the previous NASA SP-100 Advanced Technology project, and provides a bridge to NASA Project Pathfinder. The elements of CSTI High Capacity Power development include Converrsion Systems, Thermal Management, Power Management, System Diagnostics, and Environmental Interactions. Technology advancement in all areas, including materials, is required to assure the high reliability and 7 to 10 year lifetime demanded for future space nuclear power systems.

Urban Rail Supporting Technology Program Fiscal Year 1975 - Year End Summary

DOT National Transportation Integrated Search

1975-12-01

The Urban Rail Supporting Technology Program is described for the 1975 fiscal year period. Important areas include program management, technical support and applications engineering, facilities development, test and evaluation, and technology develop...

75 FR 6627 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-10

... DEPARTMENT OF COMMERCE National Telecommunications and Information Administration [Docket No. 0907141137-0079-07] RIN 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National... policy and application procedures for the Broadband Technology Opportunities Program (BTOP) established...

Superfund and Technology Liaison Program Fact Sheet

EPA Pesticide Factsheets

The Superfund and Technology Liaison (STL) Program was established to facilitate regional access to ORD laboratories, provide technical support, and assist with the integration of science and technology into decision-making for hazardous waste programs.

Mississippi Curriculum Framework for Emergency Medical Technology--Basic (Program CIP: 51.0904). Emergency Medical Technology--Paramedic (Program CIP: 51.0904). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the emergency medical technology (EMT) programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline…

Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

PubMed

Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

2016-06-01

Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

NASA Astrophysics Data System (ADS)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision-makers with the ability to assess or measure the robustness of program requirements against such uncertainties. A literature review of techniques for forecasting technology performance and development uncertainties and subsequent impacts on capability, budget, and schedule requirements resulted in the conclusion that an analysis process that coupled a probabilistic analysis technique such as Monte Carlo Simulations with quantitative and parametric models of technology performance impact and technology development time and cost requirements would allow the probabilities of meeting specific constraints of these requirements to be established. These probabilities of requirements success metrics can then be used as a quantitative and probabilistic measure of program requirements robustness against technology uncertainties. Combined with a Multi-Objective Genetic Algorithm optimization process and computer-based Decision Support System, critical information regarding requirements robustness against technology uncertainties can be captured and quantified for acquisition decision-makers. This results in a more informed and justifiable selection of program technologies during initial program definition as well as formulation of program development and risk management strategies. To meet the stated research objective, the ENhanced TEchnology Robustness Prediction and RISk Evaluation (ENTERPRISE) methodology was formulated to provide a structured and transparent process for integrating these enabling techniques to provide a probabilistic and quantitative assessment of acquisition program requirements robustness against technology performance and development uncertainties. In order to demonstrate the capabilities of the ENTERPRISE method and test the research Hypotheses, an demonstration application of this method was performed on a notional program for acquiring the Carrier-based Suppression of Enemy Air Defenses (SEAD) using Unmanned Combat Aircraft Systems (UCAS) and their enabling technologies. The results of this implementation provided valuable insights regarding the benefits and inner workings of this methodology as well as its limitations that should be addressed in the future to narrow the gap between current state and the desired state.

ADVANCED NUCLEAR FUEL CYCLE EFFECTS ON THE TREATMENT OF UNCERTAINTY IN THE LONG-TERM ASSESSMENT OF GEOLOGIC DISPOSAL SYSTEMS - EBS INPUT

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, M; Blink, J A; Greenberg, H R

2012-04-25

The Used Fuel Disposition (UFD) Campaign within the Department of Energy's Office of Nuclear Energy (DOE-NE) Fuel Cycle Technology (FCT) program has been tasked with investigating the disposal of the nation's spent nuclear fuel (SNF) and high-level nuclear waste (HLW) for a range of potential waste forms and geologic environments. The planning, construction, and operation of a nuclear disposal facility is a long-term process that involves engineered barriers that are tailored to both the geologic environment and the waste forms being emplaced. The UFD Campaign is considering a range of fuel cycles that in turn produce a range of wastemore » forms. The UFD Campaign is also considering a range of geologic media. These ranges could be thought of as adding uncertainty to what the disposal facility design will ultimately be; however, it may be preferable to thinking about the ranges as adding flexibility to design of a disposal facility. For example, as the overall DOE-NE program and industrial actions result in the fuel cycles that will produce waste to be disposed, and the characteristics of those wastes become clear, the disposal program retains flexibility in both the choice of geologic environment and the specific repository design. Of course, other factors also play a major role, including local and State-level acceptance of the specific site that provides the geologic environment. In contrast, the Yucca Mountain Project (YMP) repository license application (LA) is based on waste forms from an open fuel cycle (PWR and BWR assemblies from an open fuel cycle). These waste forms were about 90% of the total waste, and they were the determining waste form in developing the engineered barrier system (EBS) design for the Yucca Mountain Repository design. About 10% of the repository capacity was reserved for waste from a full recycle fuel cycle in which some actinides were extracted for weapons use, and the remaining fission products and some minor actinides were encapsulated in borosilicate glass. Because the heat load of the glass was much less than the PWR and BWR assemblies, the glass waste form was able to be co-disposed with the open cycle waste, by interspersing glass waste packages among the spent fuel assembly waste packages. In addition, the Yucca Mountain repository was designed to include some research reactor spent fuel and naval reactor spent fuel, within the envelope that was set using the commercial reactor assemblies as the design basis waste form. This milestone report supports Sandia National Laboratory milestone M2FT-12SN0814052, and is intended to be a chapter in that milestone report. The independent technical review of this LLNL milestone was performed at LLNL and is documented in the electronic Information Management (IM) system at LLNL. The objective of this work is to investigate what aspects of quantifying, characterizing, and representing the uncertainty associated with the engineered barrier are affected by implementing different advanced nuclear fuel cycles (e.g., partitioning and transmutation scenarios) together with corresponding designs and thermal constraints.« less

Summary of Pellet Technology Program Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gebhart, III, Gerald E.; Baylor, Larry R.; Bell, Gary L.

This report summarizes the activities and budget information of ORNL’s pellet technology program from the start of FY2014 through FY2017. Cost summaries are broken down by year and spending category. Milestone activities are outlined and described by year and further described in the project narrative. The project narrative outlines the main pellet injection technology advances enabled by the pellet technology program. A list of published research products is included, along with biographies of personnel involved. This document was prepared in support of the April 24, 2018, review of the pellet technology program at ORNL.

Final Report: Fire Prevention, Detection, and Suppression Project, Exploration Technology Development Program

NASA Technical Reports Server (NTRS)

Ruff, Gary A.

2011-01-01

The Fire Prevention, Detection, and Suppression (FPDS) project is a technology development effort within the Exploration Technology Development Program of the Exploration System Missions Directorate (ESMD) that addresses all aspects of fire safety aboard manned exploration systems. The overarching goal for work in the FPDS area is to develop technologies that will ensure crew health and safety on exploration missions by reducing the likelihood of a fire, or, if one does occur, minimizing the risk to the crew, mission, or system. This is accomplished by addressing the areas of (1) fire prevention and material flammability, (2) fire signatures and detection, and (3) fire suppression and response. This report describes the outcomes of this project from the formation of the Exploration Technology Development Program (ETDP) in October 2005 to September 31, 2010 when the Exploration Technology Development Program was replaced by the Enabling Technology Development and Demonstration Program. NASA s fire safety work will continue under this new program and will build upon the accomplishments described herein.

Making Technology Ready: Integrated Systems Health Management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Oliver, Patrick J.

2007-01-01

This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

NASA'S information technology activities for the 90's

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Erickson, Dan

1991-01-01

The Office of Aeronautics, Exploration and Technology (OAET) is completing an extensive assessment of its nearly five hundred million dollars of proposed space technology development work. The budget is divided into four segments which are as follows: (1) the base research and technology program; (2) the Civil Space Technology Initiative (CSTI); (3) the Exploration Technology Program (ETP); and (4) the High Performance Computing Initiative (HPCI). The programs are briefly discussed in the context of Astrotech 21.

Implementing a Computer/Technology Endorsement in a Classroom Technology Master's Program.

ERIC Educational Resources Information Center

Brownell, Gregg; O'Bannon, Blanche; Brownell, Nancy

In the spring of 1998, the Master's program in Classroom Technology at Bowling Green State University (Ohio) was granted conditional approval to grant, as part of the program, the new State of Ohio Department of Education computer/technology endorsement. This paper briefly describes Ohio's change from certification to licensure, the removal of…

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program - 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This FY 2012 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Pathways to Commercial Success. Technologies and Products Supported by the Fuel Cell Technologies Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

This FY 2011 report updates the results of an effort to identify and characterize commercial and near-commercial (emerging) technologies and products that benefited from the support of the Fuel Cell Technologies Program and its predecessor programs within DOE's Office of Energy Efficiency and Renewable Energy.

Improving Outcome Assessment in Information Technology Program Accreditation

ERIC Educational Resources Information Center

Goda, Bryan S.; Reynolds, Charles

2010-01-01

As of March 2010, there were fourteen Information Technology programs accredited by the Accreditation Board for Engineering and Technology, known as ABET, Inc (ABET Inc. 2009). ABET Inc. is the only recognized institution for the accreditation of engineering, computing, and technology programs in the U.S. There are currently over 128 U.S. schools…

Technology and Literacy: 21st Century Library Programming for Children and Teens

ERIC Educational Resources Information Center

Nelson, Jennifer; Braafladt, Keith

2012-01-01

Technology may not be a magic wand, but innovative technology programming can genuinely help children become adept at navigating our increasingly wired world while also helping them develop deductive reasoning, math, and other vital literacy skills. One of the simplest and most powerful tools for technology-based public library programming is…

Biomedical Technology. Innovations: The Social Consequences of Science and Technology Program.

ERIC Educational Resources Information Center

McInerney, Joseph D.; And Others

This module is part of an interdisciplinary program designed to educate the general citizenry regarding the issues of science/technology/society that have important consequences for both present and future social policies. Specifically, the program provides an opportunity for students to assess the effects of selected technological innovations in…

A Model for Integrating New Technologies into Pre-Service Teacher Training Programs Ajman University (A Case Study)

ERIC Educational Resources Information Center

Shaqour, Ali Zuhdi H.

2005-01-01

This study introduces a "Technology Integration Model" for a learning environment utilizing constructivist learning principles and integrating new technologies namely computers and the Internet into pre-service teacher training programs. The technology integrated programs and learning environments may assist learners to gain experiences…

The Impact of an Online Collaborative Learning Program on Students' Attitude towards Technology

ERIC Educational Resources Information Center

Magen-Nagar, Noga; Shonfeld, Miri

2018-01-01

This quantitative research examined the contribution of an Online Collaborative Learning (OCL) program on attitudes towards technology in terms of technological anxiety, self-confidence and technology orientation among M.Ed. students. The advanced online collaborative program was implemented at two teacher training colleges in Israel for a period…

Environmental restoration and waste management: Robotics technology development program: Robotics 5-year program plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This plan covers robotics Research, Development, Demonstration, Testing and Evaluation activities in the Program for the next five years. These activities range from bench-scale R D to full-scale hot demonstrations at DOE sites. This plan outlines applications of existing technology to near-term needs, the development and application of enhanced technology for longer-term needs, and initiation of advanced technology development to meet those needs beyond the five-year plan. The objective of the Robotic Technology Development Program (RTDP) is to develop and apply robotics technologies that will enable Environmental Restoration and Waste Management (ER WM) operations at DOE sites to be safer,more » faster and cheaper. Five priority DOE sites were visited in March 1990 to identify needs for robotics technology in ER WM operations. This 5-Year Program Plan for the RTDP detailed annual plans for robotics technology development based on identified needs. In July 1990 a forum was held announcing the robotics program. Over 60 organizations (industrial, university, and federal laboratory) made presentations on their robotics capabilities. To stimulate early interactions with the ER WM activities at DOE sites, as well as with the robotics community, the RTDP sponsored four technology demonstrations related to ER WM needs. These demonstrations integrated commercial technology with robotics technology developed by DOE in support of areas such as nuclear reactor maintenance and the civilian reactor waste program. 2 figs.« less

Marine Propulsion Technology Program Meets the Demand

ERIC Educational Resources Information Center

Fowler, Howard G.

1974-01-01

The marine technology program cluster at Florida Keys Community College is described. Technicians are trained to maintain and repair engines and selected marine accessories through a marine propulsion technology curriculum (certificate program and associate in science degree). (EA)

Educational Leadership.

ERIC Educational Resources Information Center

Tollett, John R., Ed.

This document contains the following papers on educational leadership programs and technology: (1) "Technology Standards for School Administrators: Implications for Administrator Preparation Programs" (Warren C. Hope, Bernadette Kelley, and Janet A. Guyden); (2) "Information Technology and the Transformation of Leadership Preparation Programs: A…

75 FR 10464 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... DEPARTMENT OF COMMERCE National Telecommunications and Information Administration [Docket Number 0907141137-0119-08] RIN 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National... Infrastructure (CCI) projects under the Broadband Technology Opportunities Program (BTOP) is extended until 5:00...

75 FR 14131 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... DEPARTMENT OF COMMERCE National Telecommunications and Information Administration [Docket Number: 0907141137-0154-09] RIN 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National... under the Broadband Technology Opportunities Program (BTOP) is extended until 10 p.m. Eastern Daylight...

Implementing Technology with Industrial Community: The SBIR Example

NASA Technical Reports Server (NTRS)

Ghuman, Parminder

2005-01-01

The Earth-Sun system Technology Office (ESTO) works with Small Business Innovation Research (SBIR) and Small Business Technology Transfer (STTR) programs to supplement its own technology development program. The SBIR/STTR program is a highly competitive program that encourages small business to explore their technological potential to fulfill technology needs identified by ESTO. SBIR program has three phases. The Phase 1 contracts last for 6 months with a maximum funding of $70,000, and Phase 2 contracts last for 24 months with a maximum funding of $600,000. For Phase 3, the small business must find funding in the private sector or other non-SBIR federal agency funding. During this phase ESTO evaluates Phase 2 graduates and selects those that need to be further developed for airborne or spaceflight demonstration and provides funding. This paper will discuss the all three phases in and role of ESTO in this program.

NASA Goddard Thermal Technology Overview 2017

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2017-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 17 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for CubeSat mission development will also be addressed. Many of these technologies also have broad applicability to DOD (Dept. of Defense), DOE (Dept. of the Environment), and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

NASA Goddard Thermal Technology Overview 2016

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2016-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 16 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

NASA's Commercial Communication Technology Program

NASA Technical Reports Server (NTRS)

Bagwell, James W.

1998-01-01

Various issues associated with "NASA's Commercial Communication Technology Program" are presented in viewgraph form. Specific topics include: 1) Coordination/Integration of government program; 2) Achievement of seamless interoperable satellite and terrestrial networks; 3) Establishment of program to enhance Satcom professional and technical workforce; 4) Precompetitive technology development; and 5) Effective utilization of spectrum and orbit assets.

Development of a Curriculum in Laser Technology. Final Report.

ERIC Educational Resources Information Center

Wasserman, William J.

A Seattle Central Community College project visited existing programs, surveyed need, and developed a curriculum for a future program in Laser-Electro-Optics (LEO) Technology. To establish contacts and view successful programs, project staff made visits to LEO technology programs at San Jose City College and Texas State Technical Institute, Center…

Report on High Technology Programs in Illinois Public Community Colleges.

ERIC Educational Resources Information Center

Illinois Community Coll. Board, Springfield.

Survey results are presented from a study of the steps being taken by the 52 Illinois public community colleges to develop and provide programs in high technology fields. First, high technology programs are defined as those occupational programs that educate and train individuals to operate, maintain, and/or repair micro-electronic or computerized…

Parental Decision Making about Technology and Quality in Child Care Programs

ERIC Educational Resources Information Center

Rose, Katherine K.; Vittrup, Brigitte; Leveridge, Tinney

2013-01-01

Background: This study investigated parental decision making about non-parental child care programs based on the technological and quality components of the program, both child-focused and parent-focused. Child-focused variables related to children's access to technology such as computers, educational television programming, and the internet.…

34 CFR 403.30 - What documents must a State submit to receive a grant?

Code of Federal Regulations, 2010 CFR

2010-07-01

...) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE VOCATIONAL AND APPLIED TECHNOLOGY... Technology Education Program on the basis of program years that coincide with program years under section 104... Technology Education Program. (Approved by the Office of Management and Budget under Control No. 1830-0029...

Vehicle Technologies and Fuel Cell Technologies Program: Prospective Benefits Assessment Report for Fiscal Year 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, T. S.; Taylor, C. H.; Moore, J. S.

Under a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies offices of DOE’s Office of Energy Efficiency and Renewable Energy invest in research, development, demonstration, and deployment of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies. This report estimates the benefits of successfully developing and deploying these technologies (a “Program Success” case) relative to a base case (the “No Program” case). The Program Success case represents the future with completely successful deployment of Vehicle Technologies Office (VTO) and Fuel Cell Technologies Office (FCTO) technologies. The No Program case represents a future in which theremore » is no contribution after FY 2016 by the VTO or FCTO to these technologies. The benefits of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies were estimated on the basis of differences in fuel use, primary energy use, and greenhouse gas (GHG) emissions from light-, medium- and heavy-duty vehicles, including energy and emissions from fuel production, between the base case and the Program Success case. Improvements in fuel economy of various vehicle types, growth in the stock of fuel cell vehicles and other advanced technology vehicles, and decreased GHG intensity of hydrogen production and delivery in the Program Success case over the No Program case were projected to result in savings in petroleum use and GHG emissions. Benefits were disaggregated by individual program technology areas, which included the FCTO program and the VTO subprograms of batteries and electric drives; advanced combustion engines; fuels and lubricants; materials (for reduction in vehicle mass, or “lightweighting”); and, for medium- and heavy-duty vehicles, reduction in rolling and aerodynamic resistance. Projections for the Program Success case indicate that by 2035, the average fuel economy of on-road, light-duty vehicle stock could be 47% to 76% higher than in the No Program case. On-road medium- and heavy-duty vehicle stock could be as much as 39% higher. The resulting petroleum savings in 2035 were estimated to be as high as 3.1 million barrels per day, and reductions in GHG emissions were estimated to be as high as 500 million metric tons of CO2 equivalent per year. The benefits of continuing to invest government resources in advanced vehicle and fuel cell technologies would have significant economic value in the U.S. transportation sector and reduce its dependency on oil and its vulnerability to oil price shocks.« less

Mass Balance, Beneficial Use Products, and Cost Comparisons of Four Sediment Treatment Technologies Near Commercialization

DTIC Science & Technology

2011-03-01

Superfund Innovative Technology Evaluation Program (SITE) • Assessment and Remediation of Contaminated Sediment Program (ARCS) • Contaminated Sediment...Agency (USEPA). 1994. Assessment and Remediation of Contaminated Sediments (ARCS) Program Remediation Guidance Document. EPA/905/R-94/003. Chicago, IL...conducted under one of the four following programs: • Superfund Innovative Technology Evaluation (SITE) Program • Assessment and Remediation of

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology into NASA Programs Associated with the Aeronautics Research Mission Directorate

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2015-01-01

This report is intended to help NASA program and project managers incorporate Small Business Innovation Research/Small Business Technology Transfer (SBIR/STTR) technologies that have gone through Phase II of the SBIR program into NASA Aeronautics and Mission Directorate (ARMD) programs. Other Government and commercial program managers can also find this information useful.

DOE Solar Energy Technologies Program FY 2005 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The DOE Solar Energy Technologies Program FY 2005 Annual Report chronicles the R&D results of the U.S. Department of Energy Solar Energy Technologies Program for Fiscal Year 2005. In particular, the report describes R&D performed by the Program?s national laboratories (National Renewable Energy Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, and Brookhaven National Laboratory) and university and industry partners.

Innovative quantum technologies for microgravity fundamental physics and biological research

NASA Technical Reports Server (NTRS)

Kierk, I.; Israelsson, U.; Lee, M.

2001-01-01

This paper presents a new technology program, within the fundamental physics research program, focusing on four quantum technology areas: quantum atomics, quantum optics, space superconductivity and quantum sensor technology, and quantum fluid based sensor and modeling technology.

45 CFR 170.490 - Sunset of the temporary certification program.

Code of Federal Regulations, 2011 CFR

2011-10-01

....490 Section 170.490 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.490 - Sunset of the temporary certification program.

Code of Federal Regulations, 2013 CFR

2013-10-01

....490 Section 170.490 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.490 - Sunset of the temporary certification program.

Code of Federal Regulations, 2010 CFR

2010-10-01

....490 Section 170.490 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.490 - Sunset of the temporary certification program.

Code of Federal Regulations, 2012 CFR

2012-10-01

....490 Section 170.490 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.490 - Sunset of the temporary certification program.

Code of Federal Regulations, 2014 CFR

2014-10-01

....490 Section 170.490 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

Sensors 2000! Program: Advanced Biosensor and Measurement Systems Technologies for Spaceflight Research and Concurrent, Earth-Based Applications

NASA Technical Reports Server (NTRS)

Hines, J.

1999-01-01

Sensors 2000! (S2K!) is a specialized, integrated projects team organized to provide focused, directed, advanced biosensor and bioinstrumentation systems technology support to NASA's spaceflight and ground-based research and development programs. Specific technology thrusts include telemetry-based sensor systems, chemical/ biological sensors, medical and physiological sensors, miniaturized instrumentation architectures, and data and signal processing systems. A concurrent objective is to promote the mutual use, application, and transition of developed technology by collaborating in academic-commercial-govemment leveraging, joint research, technology utilization and commercialization, and strategic partnering alliances. Sensors 2000! is organized around three primary program elements: Technology and Product Development, Technology infusion and Applications, and Collaborative Activities. Technology and Product Development involves development and demonstration of biosensor and biotelemetry systems for application to NASA Space Life Sciences Programs; production of fully certified spaceflight hardware and payload elements; and sensor/measurement systems development for NASA research and development activities. Technology Infusion and Applications provides technology and program agent support to identify available and applicable technologies from multiple sources for insertion into NASA's strategic enterprises and initiatives. Collaborative Activities involve leveraging of NASA technologies with those of other government agencies, academia, and industry to concurrently provide technology solutions and products of mutual benefit to participating members.

Spinoff 1998

NASA Technical Reports Server (NTRS)

1998-01-01

In 1958, a Congressional Mandate directed the National Aeronautics and Space Agency to ensure for the widest possible dissemination of its research and development results. Thus, the Scientific and Technical Information (STI) Program was born. While this program addressed mostly the timely dissemination of information to NASA, NASA contractors, other government agencies, and the public, technologies were identified that were clearly transferable and applicable to industry for additional use in the development of commercial products and services. Such considerations spun off the Technology Utilization Program. The very successful program went through several name changes and is today called the NASA Commercial Technology Program. The changes that have occurred over time are not only name changes, but program changes that have dramatically altered the philosophy, mission, and goal of the program. It has been identified that a more intense and proactive outreach effort within the program is necessary in order to make the newest and latest technologies available to industry now-at the time the technology is actually developed. The NASA Commercial Technology Network (NCTN), its interaction with industry at all levels through a large network of organizations and offices, is contributing to the success of small, medium, and large U.S. businesses to remain globally competitive. At the same time, new products and services derived from the transfer and application of NASA technology benefit everyone. This publication includes the following: Aerospace research and development - NASA headquarters and centers. Technology transfer and commercialization. Commercial benefits - spinoffs.NASA success and education. NASA commercial technology network.

Rover and Telerobotics Technology Program

NASA Technical Reports Server (NTRS)

Weisbin, Charles R.

1998-01-01

The Jet Propulsion Laboratory's (JPL's) Rover and Telerobotics Technology Program, sponsored by the National Aeronautics and Space Administration (NASA), responds to opportunities presented by NASA space missions and systems, and seeds commerical applications of the emerging robotics technology. The scope of the JPL Rover and Telerobotics Technology Program comprises three major segments of activity: NASA robotic systems for planetary exploration, robotic technology and terrestrial spin-offs, and technology for non-NASA sponsors. Significant technical achievements have been reached in each of these areas, including complete telerobotic system prototypes that have built and tested in realistic scenarios relevant to prospective users. In addition, the program has conducted complementary basic research and created innovative technology and terrestrial applications, as well as enabled a variety of commercial spin-offs.

The NASA controls-structures interaction technology program

NASA Technical Reports Server (NTRS)

Newsom, Jerry R.; Layman, W. E.; Waites, H. B.; Hayduk, R. J.

1990-01-01

The interaction between a flexible spacecraft structure and its control system is commonly referred to as controls-structures interaction (CSI). The CSI technology program is developing the capability and confidence to integrate the structure and control system, so as to avoid interactions that cause problems and to exploit interactions to increase spacecraft capability. A NASA program has been initiated to advance CSI technology to a point where it can be used in spacecraft design for future missions. The CSI technology program is a multicenter program utilizing the resources of the NASA Langley Research Center (LaRC), the NASA Marshall Space Flight Center (MSFC), and the NASA Jet Propulsion Laboratory (JPL). The purpose is to describe the current activities, results to date, and future activities of the NASA CSI technology program.

Energy Efficiency and Renewable Energy Program. Bibliography, 1993 edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaughan, K.H.

1993-06-01

The Bibliography contains listings of publicly available reports, journal articles, and published conference papers sponsored by the DOE Office of Energy Efficiency and Renewable Energy and published between 1987 and mid-1993. The topics of Bibliography include: analysis and evaluation; building equipment research; building thermal envelope systems and materials; district heating; residential and commercial conservation program; weatherization assistance program; existing buildings research program; ceramic technology project; alternative fuels and propulsion technology; microemulsion fuels; industrial chemical heat pumps; materials for advanced industrial heat exchangers; advanced industrial materials; tribology; energy-related inventions program; electric energy systems; superconducting technology program for electric energy systems; thermalmore » energy storage; biofuels feedstock development; biotechnology; continuous chromatography in multicomponent separations; sensors for electrolytic cells; hydropower environmental mitigation; environmental control technology; continuous fiber ceramic composite technology.« less

76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...This final rule establishes a permanent certification program for the purpose of certifying health information technology (HIT). This final rule is issued pursuant to the authority granted to the National Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public Health Service Act (PHSA), as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act. The permanent certification program will eventually replace the temporary certification program that was previously established by a final rule. The National Coordinator will use the permanent certification program to authorize organizations to certify electronic health record (EHR) technology, such as Complete EHRs and/or EHR Modules. The permanent certification program could also be expanded to include the certification of other types of HIT.

Innovative Partnerships Program Accomplishments: 2009-2010 at NASA's Kennedy Space Center

NASA Technical Reports Server (NTRS)

Makufka, David

2010-01-01

This document reports on the accomplishments of the Innovative Partnerships Program during the two years of 2009 and 2010. The mission of the Innovative Partnerships Program is to provide leveraged technology alternatives for mission directorates, programs, and projects through joint partnerships with industry, academia, government agencies, and national laboratories. As outlined in this accomplishments summary, the IPP at NASA's Kennedy Space Center achieves this mission via two interdependent goals: (1) Infusion: Bringing external technologies and expertise into Kennedy to benefit NASA missions, programs, and projects (2) Technology Transfer: Spinning out space program technologies to increase the benefits for the nation's economy and humanity

Space Station Engineering and Technology Development. Proceedings of the Panel on Program Performance and Onboard Mission Control

NASA Technical Reports Server (NTRS)

1985-01-01

An ad-hoc committee was asked to review the following questions relevant to the space station program: (1) onboard maintainability and repair; (2) in-space research and technology program and facility plans; (3) solar thermodynamic research and technology development program planning; (4) program performance (cost estimating, management, and cost avoidance); (5) onboard versus ground-based mission control; and (6) technology development road maps from IOC to the growth station. The objective of these new assignments is to provide NASA with advice on ways and means for improving the content, performance, and/or effectiveness of these elements of the space station program.

Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

NASA Technical Reports Server (NTRS)

Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

1985-01-01

Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

NASA Astrophysics Data System (ADS)

Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

1985-09-01

Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

General Aviation Propulsion

NASA Technical Reports Server (NTRS)

1980-01-01

Programs exploring and demonstrating new technologies in general aviation propulsion are considered. These programs are the quiet, clean, general aviation turbofan (QCGAT) program; the general aviation turbine engine (GATE) study program; the general aviation propeller technology program; and the advanced rotary, diesel, and reciprocating engine programs.

Human Reproduction: Social and Technological Aspects. Innovations: The Social Consequences of Science and Technology Program.

ERIC Educational Resources Information Center

McConnell, Mary C.; And Others

This module is part of an interdisciplinary program designed to educate the general citizenry regarding the issues of science/technology/society that have important consequences for both present and future social policies. Specifically, the program provides an opportunity for students to assess the effects of selected technological innovations in…

One-to-One Laptop Teacher Education: Does Involvement Affect Candidate Technology Skills and Dispositions?

ERIC Educational Resources Information Center

Donovan, Loretta; Green, Tim; Hansen, Laurie E.

2012-01-01

This study compares teacher candidates' initial and changed beliefs, dispositions, and uses of technology in two credential program models: a one-to-one laptop program with ubiquitous technology use and a traditional credential program in which students are expected to have specific technology experiences and requirements in each course (a model…

High area rate reconnaissance (HARR) and mine reconnaissance/hunter (MR/H) exploratory development programs

NASA Astrophysics Data System (ADS)

Lathrop, John D.

1995-06-01

This paper describes the sea mine countermeasures developmental context, technology goals, and progress to date of the two principal Office of Naval Research exploratory development programs addressing sea mine reconnaissance and minehunting technology development. The first of these programs, High Area Rate Reconnaissance, is developing toroidal volume search sonar technology, sidelooking sonar technology, and associated signal processing technologies (motion compensation, beamforming, and computer-aided detection and classification) for reconnaissance and hunting against volume mines and proud bottom mines from 21-inch diameter vehicles operating in deeper waters. The second of these programs, Amphibious Operation Area Mine Reconnaissance/Hunter, is developing a suite of sensor technologies (synthetic aperture sonar, ahead-looking sonar, superconducting magnetic field gradiometer, and electro-optic sensor) and associated signal processing technologies for reconnaissance and hunting against all mine types (including buried mines) in shallow water and very shallow water from 21-inch diameter vehicles. The technologies under development by these two programs must provide excellent capabilities for mine detection, mine classification, and discrimination against false targets.

Integrating the Department of Defense Military Services’ Technology Development Programs to Improve Time, Cost, and Technical Quality Parameters

DTIC Science & Technology

2007-03-01

the DoD in general and across the SR, DD(X), and FCS programs in particular. The findings of this study show that through careful planning and...FCS programs in particular. The findings of this study show that through careful planning and coordinated technology transition, DoD acquisition...careful planning and coordinated technology transition, DoD acquisition programs can indeed leverage the technology development efforts of the three

NASA's Physics of the Cosmos and Cosmic Origins technology development programs

NASA Astrophysics Data System (ADS)

Clampin, Mark; Pham, Thai

2014-07-01

NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices, established in 2011, reside at the NASA Goddard Space Flight Center (GSFC). The offices serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the programs' technology development activities and technology investment portfolio, funded by NASA's Strategic Astrophysics Technology (SAT) program. We currently fund 19 technology advancements to enable future PCOS and COR missions to help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The programs' goal is to promote and support technology development needed to enable missions envisioned by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) Decadal Survey report [1] and the Astrophysics Implementation Plan (AIP) [2]. These include technology development for dark energy, gravitational waves, X-ray and inflation probe science, and a 4m-class UV/optical telescope to conduct imaging and spectroscopy studies, as a post-Hubble observatory with significantly improved sensitivity and capability.

NASA's Physics of the Cosmos and Cosmic Origins Technology Development Programs

NASA Technical Reports Server (NTRS)

Clampin, Mark; Pham, Thai

2014-01-01

NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices, established in 2011, reside at the NASA Goddard Space Flight Center (GSFC). The offices serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the programs' technology development activities and technology investment portfolio, funded by NASA's Strategic Astrophysics Technology (SAT) program. We currently fund 19 technology advancements to enable future PCOS and COR missions to help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The programs' goal is to promote and support technology development needed to enable missions envisioned by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) Decadal Survey report [1] and the Astrophysics Implementation Plan (AIP) [2]. These include technology development for dark energy, gravitational waves, X-ray and inflation probe science, and a 4m-class UV/optical telescope to conduct imaging and spectroscopy studies, as a post-Hubble observatory with significantly improved sensitivity and capability.

NASA's Physics of the Cosmos and Cosmic Origins Technology Development Programs

NASA Technical Reports Server (NTRS)

Pham, Thai; Seery, Bernard; Ganel, Opher

2016-01-01

The strategic astrophysics missions of the coming decades will help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" Enabling these missions requires advances in key technologies far beyond the current state of the art. NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices manage technology maturation projects funded through the Strategic Astrophysics Technology (SAT) program to accomplish such advances. The PCOS and COR Program Offices, residing at the NASA Goddard Space Flight Center (GSFC), were established in 2011, and serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the Programs' technology development activities and the current technology investment portfolio of 23 technology advancements. We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The Programs' priorities are driven by strategic direction from the Astrophysics Division, which is informed by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) 2010 Decadal Survey report [1], the Astrophysics Implementation Plan (AIP) [2] as updated, and the Astrophysics Roadmap "Enduring Quests, Daring Visions" [3]. These priorities include technology development for missions to study dark energy, gravitational waves, X-ray and inflation probe science, and large far-infrared (IR) and ultraviolet (UV)/optical/IR telescopes to conduct imaging and spectroscopy studies. The SAT program is the Astrophysics Division's main investment method to mature technologies that will be identified by study teams set up to inform the 2020 Decadal Survey process on several large astrophysics mission concepts.

76 FR 22673 - Technology Innovation Program Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-22

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Technology Innovation Program Advisory Board AGENCY: National Institute of Standards and Technology, Department of Commerce... Standards and Technology (NIST) published a notice in the Federal Register announcing an open meeting for...

Fossil Energy Program Annual Progress Report for the Period April 1, 2000 through March 31, 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkins, RR

This report covers progress made at Oak Ridge National Laboratory (ORNL) on research and development projects that contribute to the advancement of fossil energy technologies. Projects on the ORNL Fossil Energy Program are supported by the U.S. Department of Energy (DOE) Office of Fossil Energy, the DOE National Energy Technology Laboratory (NETL), the DOE Fossil Energy Clean Coal Technology (CCT) Program, the DOE National Petroleum Technology Office, and the DOE Fossil Energy Office of Strategic Petroleum Reserve (SPR). The ORNL Fossil Energy Program research and development activities cover the areas of coal, clean coal technology, gas, petroleum, and support tomore » the SPR. An important part of the Fossil Energy Program is technical management of all activities on the DOE Fossil Energy Advanced Research (AR) Materials Program. The AR Materials Program involves research at other DOE and government laboratories, at universities, and at industrial organizations.« less

Energy and technology review

NASA Astrophysics Data System (ADS)

Johnson, K. C.

1991-04-01

This issue of Energy and Technology Review discusses the various educational programs in which Lawrence Livermore National Laboratory (LLNL) participates or sponsors. LLNL has a long history of fostering educational programs for students from kindergarten through graduate school. A goal is to enhance the teaching of science, mathematics, and technology and thereby assist educational institutions to increase the pool of scientists, engineers, and technicians. LLNL programs described include: (1) contributions to the improvement of U.S. science education; (2) the LESSON program; (3) collaborations with Bay Area Science and Technology Education; (4) project HOPES; (5) lasers and fusion energy education; (6) a curriculum on global climate change; (7) computer and technology instruction at LLNL's Science Education Center; (8) the National Education Supercomputer Program; (9) project STAR; (10) the American Indian Program; (11) LLNL programs with historically Black colleges and Universities; (12) the Undergraduate Summer Institute on Contemporary Topics in Applied Science; (13) the National Physical Science Consortium: A Fellowship Program for Minorities and Women; (14) LLNL's participation with AWU; (15) the apprenticeship programs at LLNL; and (16) the future of LLNL's educational programs. An appendix lists all of LLNL's educational programs and activities. Contacts and their respective telephone numbers are given for all these programs and activities.

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: INNOVATION MAKING A DIFFERENCE

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program encourages commercialization of innovative technologies for characterizing and remediating hazardous waste site contamination through four components: Demonstration, Emerging Technology, and Monitoring & Measurement Pr...

Technology transfer from the viewpoint of a NASA prime contractor

NASA Technical Reports Server (NTRS)

Dyer, Gordon

1992-01-01

Viewgraphs on technology transfer from the viewpoint of a NASA prime contractor are provided. Technology Transfer Program for Manned Space Systems and the Technology Transfer Program status are addressed.

Environmental Technology Verification (ETV) Quality Program (Poster)

EPA Science Inventory

This is a poster created for the ETV Quality Program. The EPA Environmental Technology Verification Program (ETV) develops test protocols and verifies the performance of innovative technologies that have the potential to improve protection of human health and the environment. The...

ENVIRONMENTAL TECHNOLOGY VERIFICATION AND INDOOR AIR

EPA Science Inventory

The paper discusses environmental technology verification and indoor air. RTI has responsibility for a pilot program for indoor air products as part of the U.S. EPA's Environmental Technology Verification (ETV) program. The program objective is to further the development of sel...

ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM CASE STUDIES: DEMONSTRATING PROGRAM OUTCOMES, VOLUME II

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This bookle...

Environmental Technology Verification Program - ETV - Case Studies: Demonstrating Program Outcomes

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) Program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This cd con...

7 CFR 90.2 - General terms defined.

Code of Federal Regulations, 2013 CFR

2013-01-01

... the Science and Technology program of the Agricultural Marketing Service agency, or any officer or... be delegated, to act. Laboratories. Science and Technology laboratories performing the official analyses described in this subchapter. Program. The Science and Technology (S&T) program of the...

7 CFR 90.2 - General terms defined.

Code of Federal Regulations, 2012 CFR

2012-01-01

... the Science and Technology program of the Agricultural Marketing Service agency, or any officer or... be delegated, to act. Laboratories. Science and Technology laboratories performing the official analyses described in this subchapter. Program. The Science and Technology (S&T) program of the...

7 CFR 90.2 - General terms defined.

Code of Federal Regulations, 2014 CFR

2014-01-01

... the Science and Technology program of the Agricultural Marketing Service agency, or any officer or... be delegated, to act. Laboratories. Science and Technology laboratories performing the official analyses described in this subchapter. Program. The Science and Technology (S&T) program of the...

75 FR 70578 - Competitive and Noncompetitive Nonformula Federal Assistance Programs-Administrative Provisions...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-18

..., extension, and education programs on technology development and integrated research, extension, and education programs on technology implementation, in accordance with the purpose and priorities as described... the development, distribution, and implementation of biobased energy technologies; to promote...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 2002

EPA Science Inventory

This report details the Fiscal Year 2002 activities of the Superfund Innovative Technology Evaluation (SITE) Program. The Program focused on the remediation needs of the hazardous waste remediation community through demonstration and evaluation of innovative technologies for reme...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 2001

EPA Science Inventory

This report details the fiscal year 2001 activities of the Superfund Innovative Technology Evaluation (SITE) Program. The Program focuses on the remediation needs of the hazardous waste remediation community through demonstration and evaluation of innovative technologies for re...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1995

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program was established more than nine years ago to encourage the development and implementation of innovative treatment technologies for hazardous waste site remediation. Development of this program was in direct response to ...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

USEPA SITE PROGRAM APPROACH TO TECHNOLOGY TRANSFER AND REGULATORY ACCEPTANCE

EPA Science Inventory

The SITE Program was created to meet the increased demand for innovative technologies for hazardous waste treatment. To accomplish this mission, the program seeks to advance the development, implementation and commercialization of innovative technologies for hazardous waste chara...

78 FR 31535 - Assistive Technology Alternative Financing Program

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-24

... DEPARTMENT OF EDUCATION Assistive Technology Alternative Financing Program AGENCY: Office of Special Education and Rehabilitative Services, Department of Education. ACTION: Notice. Catalog of Federal... developed for the Assistive Technology (AT) Alternative Financing Program (AFP) in fiscal year (FY) 2012 to...

Technology Transition a Model for Infusion and Commercialization

NASA Technical Reports Server (NTRS)

McMillan, Vernotto C.

2006-01-01

The National Aeronautics and Space Administration has as part of its charter the mission of transferring technologies developed for the space program into the private sector for the purpose of affording back to the American people the economical and improved quality of life benefits associated with the technologies developed. In recent years considerable effort has been made to use this program for not only transitioning technologies out of the NASA Mission Directorate Programs, but also to transfer technologies into the Mission Directorate Programs and leverage the impact of government and private sector innovation. The objective of this paper is to outline an approach and the creation of a model that brings together industry, government, and commercialization strategies. When these elements are integrated, the probability of successful technology development, technology infusion into the Mission Programs, and commercialization into the private sector is increased. This model primarily addresses technology readiness levels between TRL 3 and TRL 6. This is typically a gap area known as the valley of death. This gap area is too low for commercial entities to invest heavily and not developed enough for major programs to actively pursue. This model has shown promise for increasing the probably of TRL advancement to an acceptable level for NASA programs and/or commercial entities to afford large investments toward either commercialization or infusion.

NASA space research and technology overview (ITP)

NASA Technical Reports Server (NTRS)

Reck, Gregory M.

1992-01-01

A series of viewgraphs summarizing NASA space research and technology is presented. Some of the specific topics covered include the organization and goals of the Office of Aeronautics and Space Technology, technology maturation strategy, integrated technology plan for the Civil Space Program, program selection and investment prioritization, and space technology benefits.

Programming and Technology for Accessibility in Geoscience

NASA Astrophysics Data System (ADS)

Sevre, E.; Lee, S.

2013-12-01

Many people, students and professors alike, shy away from learning to program because it is often believed to be something scary or unattainable. However, integration of programming into geoscience education can be a valuable tool for increasing the accessibility of content for all who are interested. It is my goal to dispel these myths and convince people that: 1) Students with disabilities can use programming to increase their role in the classroom, 2) Everyone can learn to write programs to simplify daily tasks, 3) With a deep understanding of the task, anyone can write a program to do a complex task, 4) Technology can be combined with programming to create an inclusive environment for all students of geoscience, and 5) More advanced knowledge of programming and technology can lead geoscientists to create software to serve as assistive technology in the classroom. It is my goal to share my experiences using technology to enhance the classroom experience as a way of addressing the aforementioned issues. Through my experience, I have found that programming skills can be included and learned by all to enhance the content of courses without detracting from curriculum. I hope that, through this knowledge, geoscience courses can become more accessible for people with disabilities by including programming and technology to the benefit of all involved.

Proposed Social Spending Innovation Research (SSIR) Program: Harnessing American Entrepreneurial Talent to Solve Major U.S. Social Problems

ERIC Educational Resources Information Center

Coalition for Evidence-Based Policy, 2015

2015-01-01

The Social Spending Innovation Research (SSIR) proposal seeks to replicate, in social spending, the great success of the Small Business Innovation Research (SBIR) program in technology development. The SBIR program funds technology development by entrepreneurial small companies. The program has spawned breakthrough technologies in diverse areas…

The Computer Experience Microvan Program: A Cooperative Endeavor to Improve University-Public School Relations through Technology.

ERIC Educational Resources Information Center

Amodeo, Luiza B.; Martin, Jeanette

To a large extent the Southwest can be described as a rural area. Under these circumstances, programs for public understanding of technology become, first of all, exercises in logistics. In 1982, New Mexico State University introduced a program to inform teachers about computer technology. This program takes microcomputers into rural classrooms…

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Code of Federal Regulations, 2013 CFR

2013-04-01

..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2013-04-01 2013-04-01 false What are the requirements for research, development, and...

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Code of Federal Regulations, 2010 CFR

2010-04-01

..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2010-04-01 2010-04-01 false What are the requirements for research, development, and...

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Code of Federal Regulations, 2014 CFR

2014-04-01

..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2014-04-01 2014-04-01 false What are the requirements for research, development, and...

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Code of Federal Regulations, 2012 CFR

2012-04-01

..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2012-04-01 2012-04-01 false What are the requirements for research, development, and...

23 CFR 420.207 - What are the requirements for research, development, and technology transfer work programs?

Code of Federal Regulations, 2011 CFR

2011-04-01

..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2011-04-01 2011-04-01 false What are the requirements for research, development, and...

34 CFR 614.1 - What is the purpose of the Preparing Tomorrow's Teachers to Use Technology program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What is the purpose of the Preparing Tomorrow's Teachers to Use Technology program? 614.1 Section 614.1 Education Regulations of the Offices of the... Use Technology program? (a) This program provides grants to help future teachers become proficient in...

Mississippi Curriculum Framework for Forestry Technology (Program CIP: 03.0401--Forest Harvesting and Production Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the forestry technology program cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the…

Mississippi Curriculum Framework for Medical Radiologic Technology (Radiography) (CIP: 51.0907--Medical Radiologic Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the radiologic technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the program,…

Programs for Middle School Math: An Inventory of Existing Technology. Working Paper

ERIC Educational Resources Information Center

Saultz, Andrew

2012-01-01

In this working paper, Andrew Saultz of Michigan State University inventories the current landscape of technology programs available for middle school math. The working paper is not intended as a "consumers' guide" to technology programs, and the descriptions of some specific programs are not fully accurate or current. Readers who are interested…

Preparing for High Technology: Model Programs in the USA. Research and Development Series No. 258.

ERIC Educational Resources Information Center

Doty, Charles R.

This publication identifies exemplary programs and human resources in the automated manufacturing technologies. Its purpose is to assist vocational education program planners and curriculum specialists in updating programs and staff skills to prepare for high technology. Chapter 1 is an introduction. Chapter 2 describes the seven U.S. Secretary of…

Mississippi Curriculum Framework for Civil Technology (Program CIP: 15.0201--Civil Engineering/Civil Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the civil technology programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and section…

Mississippi Curriculum Framework for Medical Laboratory Technology Programs (CIP: 51.1004--Medical Laboratory Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the medical laboratory technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Future Orbital Power Systems Technology Requirements

NASA Technical Reports Server (NTRS)

1978-01-01

NASA is actively involved in program planning for missions requiring several orders of magnitude, more energy than in the past. Therefore, a two-day symposium was held to review the technology requirements for future orbital power systems. The purpose of the meeting was to give leaders from government and industry a broad view of current government supported technology efforts and future program plans in space power. It provided a forum for discussion, through workshops, to comment on current and planned programs and to identify opportunities for technology investment. Several papers are presented to review the technology status and the planned programs.

Uncertainties in climate change projections for viticulture in Portugal

NASA Astrophysics Data System (ADS)

Fraga, Helder; Malheiro, Aureliano C.; Moutinho-Pereira, José; Pinto, Joaquim G.; Santos, João A.

2013-04-01

The assessment of climate change impacts on viticulture is often carried out using regional climate model (RCM) outputs. These studies rely on either multi-model ensembles or on single-model approaches. The RCM-ensembles account for uncertainties inherent to the different models. In this study, using a 16-RCM ensemble under the IPCC A1B scenario, the climate change signal (future minus recent-past, 2041-2070 - 1961-2000) of 4 bioclimatic indices (Huglin Index - HI, Dryness Index - DI, Hydrothermal Index - HyI and CompI - Composite Index) over mainland Portugal is analysed. A normalized interquartile range (NIQR) of the 16-member ensemble for each bioclimatic index is assessed in order to quantify the ensemble uncertainty. The results show significant increases in the HI index over most of Portugal, with higher values in Alentejo, Trás-os-Montes and Douro/Porto wine regions, also depicting very low uncertainty. Conversely, the decreases in the DI pattern throughout the country show large uncertainties, except in Minho (northwestern Portugal), where precipitation reaches the highest amounts in Portugal. The HyI shows significant decreases in northwestern Portugal, with relatively low uncertainty all across the country. The CompI depicts significant decreases over Alentejo and increases over Minho, though decreases over Alentejo reveal high uncertainty, while increases over Minho show low uncertainty. The assessment of the uncertainty in climate change projections is of great relevance for the wine industry. Quantifying this uncertainty is crucial, since different models may lead to quite different outcomes and may thereby be as crucial as climate change itself to the winemaking sector. This work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project FCOMP-01-0124-FEDER-022692.

Comparison of authigenic carbonates formation at mud volcanoes and pockmarks in the Portuguese Margin vs. at the Yinazao serpentinite mud volcano in the Marianas forearc

NASA Astrophysics Data System (ADS)

Magalhaes, V. H.; Freitas, M.; Azevedo, M. R.; Pinheiro, L. M.; Salgueiro, E.; Abrantes, F. F. G.

2017-12-01

On the Portuguese passive continental margin, active and past seepage processes form mud volcanoes and pockmarks at the seafloor. Often associated with these structures are extensive methane-derived authigenic carbonates that form from deep-sourced methane-rich fluids that ascend from deep to the upper sedimentary column and often discharge at the seafloor. These carbonates form within the sediments and are either dominated by dolomite and high-Mg calcites, when formed under a restricted seawater circulation environment, anoxic and low sulphate conditions; or by aragonite and calcite when formed close to or at the seafloor in a high sulphate system. The δ13C values (-56.2‰ VPDB) found on the carbonate-cemented material clearly indicates methane as the major carbon source. On the Yinazao serpentinite mud volcano at an active, non-accretionary, convergent margin, sediment samples from IODP Sites U1491 and U1492 (Exp. 366) contain authigenic minerals such as aragonite, calcite, brucite, gypsum among others. Authigenic aragonite occurs predominantly within the top meters of the cores where both oxidation and seawater circulation in the sedimentary column are higher. In this system, initial results indicate that the major carbon source is most probably not methane but seawater related. This work discusses and compares the major carbon sources in both systems: sedimentary mud volcanoes and pockmarks of a passive margin vs. a serpentinite mud volcano of an active, non-accretionary, convergent margin. We acknowledge the support from the PES project - Pockmarks and fluid seepage in the Estremadura Spur: implications for regional geology, biology, and petroleum systems (PTDC/GEOFIQ/5162/2014) financed by the Portuguese Foundation for Science and Technology (FCT).

Precipitation extremes in the Iberian Peninsula: an overview of the CLIPE project

NASA Astrophysics Data System (ADS)

Santos, João A.; Gonçalves, Paulo M.; Rodrigues, Tiago; Carvalho, Maria J.; Rocha, Alfredo

2014-05-01

The main aims of the project "Climate change of precipitation extreme episodes in the Iberian Peninsula and its forcing mechanisms - CLIPE" are 1) to diagnose the climate change signal in the precipitation extremes over the Iberian Peninsula (IP) and 2) to identify the underlying physical mechanisms. For the first purpose, a multi-model ensemble of 25 Regional Climate Model (RCM) simulations, from the ENSEMBLES project, is used. These experiments were generated by 15 RCMs, driven by five General Circulation Models (GCMs) under both historic conditions (1951-2000) and SRES A1B scenario (2001-2100). In this project, daily precipitation and mean sea level pressure, for the periods 1961-1990 (recent past) and 2021-2100 (future), are used. Using the Standardised Precipitation Index (SPI) on a daily basis, a precipitation extreme is defined by the pair of threshold values (Dmin, Imin), where Dmin is the minimum number of consecutive days with daily SPI above the Imin value. For both past and future climates, a precipitation extreme of a specific type is then characterised by two variables: the number of episodes with a specific duration in days and the number of episodes with a specific mean intensity (SPI/duration). Climate change is also assessed by changes in their Probability Density Functions (PDFs), estimated at sectors representative of different precipitation regimes. Lastly, for the second objective of this project, links between precipitation and Circulation Weather Regimes (CWRs) are explored for both past and future climates. Acknowledgments: this work is supported by European Union Funds (FEDER/COMPETE - Operational Competitiveness Programme) and by national funds (FCT - Portuguese Foundation for Science and Technology) under the project CLIPE (PTDC/AAC-CLI/111733/2009).

Assessing population exposure for landslide risk analysis using dasymetric cartography

NASA Astrophysics Data System (ADS)

Garcia, Ricardo A. C.; Oliveira, Sergio C.; Zezere, Jose L.

2015-04-01

Exposed Population is a major topic that needs to be taken into account in a full landslide risk analysis. Usually, risk analysis is based on an accounting of inhabitants number or inhabitants density, applied over statistical or administrative terrain units, such as NUTS or parishes. However, this kind of approach may skew the obtained results underestimating the importance of population, mainly in territorial units with predominance of rural occupation. Furthermore, the landslide susceptibility scores calculated for each terrain unit are frequently more detailed and accurate than the location of the exposed population inside each territorial unit based on Census data. These drawbacks are not the ideal setting when landslide risk analysis is performed for urban management and emergency planning. Dasymetric cartography, which uses a parameter or set of parameters to restrict the spatial distribution of a particular phenomenon, is a methodology that may help to enhance the resolution of Census data and therefore to give a more realistic representation of the population distribution. Therefore, this work aims to map and to compare the population distribution based on a traditional approach (population per administrative terrain units) and based on dasymetric cartography (population by building). The study is developed in the Region North of Lisbon using 2011 population data and following three main steps: i) the landslide susceptibility assessment based on statistical models independently validated; ii) the evaluation of population distribution (absolute and density) for different administrative territorial units (Parishes and BGRI - the basic statistical unit in the Portuguese Census); and iii) the dasymetric population's cartography based on building areal weighting. Preliminary results show that in sparsely populated administrative units, population density differs more than two times depending on the application of the traditional approach or the dasymetric cartography. This work was supported by the FCT - Portuguese Foundation for Science and Technology.

NDE Technology Development Program for Non-Visual Volumetric Inspection Technology; Sensor Effectiveness Testing Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moran, Traci L.; Larche, Michael R.; Denslow, Kayte M.

The Pacific Northwest National Laboratory (PNNL) located in Richland, Washington, hosted and administered Sensor Effectiveness Testing that allowed four different participants to demonstrate the NDE volumetric inspection technologies that were previously demonstrated during the Technology Screening session. This document provides a Sensor Effectiveness Testing report for the final part of Phase I of a three-phase NDE Technology Development Program designed to identify and mature a system or set of non-visual volumetric NDE technologies for Hanford DST primary liner bottom inspection. Phase I of the program will baseline the performance of current or emerging non-visual volumetric NDE technologies for their abilitymore » to detect and characterize primary liner bottom flaws, and identify candidate technologies for adaptation and maturation for Phase II of the program.« less

Spinoff 1978

NASA Technical Reports Server (NTRS)

Haggerty, James J.

1978-01-01

Spinoff '78 is the annual report of NASA's Technology Utilization Program, which is charged with promoting and stimulating the practical application of government-sponsored aerospace technology. The report is organized in three sections: 1) Aerospace Aims; 2) Technology Twice Used; and 3) Technology Utilization. Section 1 outlines NASA's major programs in space exploration, aeronautical research and technology application, and describes the potential benefits of a direct nature that are accruing from these efforts. Section 2 contains a representative sampling of the indirect benefits resulting from the secondary use of aerospace technology in industry and the economy. Section 3 details the nationwide activities of the Technology Utilization Program in encouraging the broadest possible secondary use of new technology emerging from aerospace programs. The latter section also includes a list of regional NASA officials and others who can be contacted by those seeking NASA technical information or assistance.

Spinoff 2002: Fortieth Anniversary Technology Utilization Program

NASA Technical Reports Server (NTRS)

2002-01-01

Since its inception 40 years ago, NASA's Technology Transfer Program has led the way for our nation to benefit from cutting-edge aerospace technologies. In addition to contributing to U.S. economic growth, these technologies are improving the quality of life on Earth while finding new ways to protect and preserve it. NASA's research and development efforts have advanced areas in medicine, communications, manufacturing, computer technology, and homeland security. These breakthroughs, translated into commercial products, are enhancing the lives of Americans everywhere. When a congressional mandate led NASA to develop the Scientific and Technical Information (STI) Program, the Agency began a wide dissemination of its research and development results. In doing so, NASA recognized that many of its technologies were transferable to industry for the development of commercial products. As a result, the Technology Utilization Program was born in 1962. The successful program went through several changes over the years, as its philosophy, mission, and goals adapted into the Technology Transfer Program we know today. The program strives to make the latest technologies available to industry as soon as they are developed. Each year, NASA's Spinoff publication showcases new products and services resulting from commercial partnerships between NASA and private industry. In the 2002 issue, the NASA field centers reflect upon the growth that has made these innovations available to the public. The Research and Development section examines past achievements, current successes, and future goals for each of the ten NASA centers. The Commercial Benefits section proudly highlights 51 new spinoff products, including a heart pump for patients needing a heart transplant, as well as an air purifier that destroys anthrax spores. The Technology Transfer and Outreach section describes the outreach achievements and educational successes made possible through the NASA Commercial Technology Network. Each section of Spinoff 2002 provides compelling evidence of the Technology Transfer Program's success and value. With commercial products and successes spanning from work on the Apollo missions to the International Space Station, the 40th anniversary of the Technology Transfer Program invites us to celebrate our history while planning the future.

Technology Evaluation Report - SITE PROGRAM DEMONSTRATION OF THE ULTROX INTERNATIONAL ULTRAVIOLET RADIATION OXIDATION TECHNOLOGY

EPA Science Inventory

In support of EPA's Superfund Innovative Technology Evaluation (SITE) Program, this report presents the results of the Ultrox International technology demonstration. The Ultrox® technology (a registered trademark of Ultrox International) simultaneously uses ultraviolet (UV) radi...

U.S. ENVIRONMENTAL PROTECTION AGENCY (EPA) ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) PROGRAM: ARSENIC MONITORING TECHNOLOGIES

EPA Science Inventory

The U.S. Environmental Protection Agency Environmental Technology Verification (ETV) program evaluates the performance of innovative air, water, pollution prevention and monitoring technologies that have the potential to improve human health and the environment. This technology ...

Computer Engineering Technology. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a computer engineering technology program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

Recommendations for the Improved Effectiveness and Reporting of Telemedicine Programs in Developing Countries: Results of a Systematic Literature Review.

PubMed

Khanal, Sumesh; Burgon, Joseph; Leonard, Saoirse; Griffiths, Matthew; Eddowes, Lucy A

2015-11-01

A lack of decisive evidence on the impact of telemedicine on financial and clinical outcomes has not prohibited significant investment in developing countries. Understanding characteristics that facilitate effective telemedicine programs is required to allow telemedicine to be used to its full potential. This systematic review aimed to identify organizational, technological, and financial features of successful telemedicine programs providing direct clinical care in developing countries. Databases were searched, and the results were reviewed systematically according to predefined inclusion/exclusion criteria. Information on location(s), measure of success, and organizational, technological, and financial characteristics were extracted. This review was impeded by inadequate program reporting, and so a concise checklist was developed to aid improved reporting, enabling future reviews to identify key characteristics of effective programs. This systematic review identified 46 articles reporting 36 programs that fulfilled the inclusion/exclusion criteria. Programs were distributed globally, including regional, national, and international programs. Technological modalities included synchronous technology, real-time teleconsultations, and asynchronous technology. Program integration with existing systems and twinning of international institutions were identified as factors enabling program success. Other factors included simple and easy-to-use technology, ability to reduce the burden on healthcare professionals, and technology able to maintain functionality in challenging environmental circumstances. Reports describing effectiveness and costs were limited. This systematic review identified key factors associated with telemedicine program success. However, inconsistencies in reporting represent an obstacle to establishment of successful programs in developing countries by limiting the application of previous experiences. Adhering to the guidelines suggested here may allow more quantitative assessments of effectiveness and impact for future programs.

Non-Constant Learning Rates in Retrospective Experience Curve Analyses and their Correlation to Deployment Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wei, Max; Smith, Sarah J.; Sohn, Michael D.

2015-07-16

A key challenge for policy-makers and technology market forecasters is to estimate future technology costs and in particular the rate of cost reduction versus production volume. A related, critical question is what role should state and federal governments have in advancing energy efficient and renewable energy technologies? This work provides retrospective experience curves and learning rates for several energy-related technologies, each of which have a known history of federal and state deployment programs. We derive learning rates for eight technologies including energy efficient lighting technologies, stationary fuel cell systems, and residential solar photovoltaics, and provide an overview and timeline ofmore » historical deployment programs such as state and federal standards and state and national incentive programs for each technology. Piecewise linear regimes are observed in a range of technology experience curves, and public investments or deployment programs are found to be strongly correlated to an increase in learning rate across multiple technologies. A downward bend in the experience curve is found in 5 out of the 8 energy-related technologies presented here (electronic ballasts, magnetic ballasts, compact fluorescent lighting, general service fluorescent lighting, and the installed cost of solar PV). In each of the five downward-bending experience curves, we believe that an increase in the learning rate can be linked to deployment programs to some degree. This work sheds light on the endogenous versus exogenous contributions to technological innovation and highlights the impact of exogenous government sponsored deployment programs. This work can inform future policy investment direction and can shed light on market transformation and technology learning behavior.« less

Housing Star Schools Reforms.

ERIC Educational Resources Information Center

Tushnet, Naida C.

The Star Schools Program has funded projects to explore innovative educational applications of technology in distance education. Funded projects have applied a variety of technologies, including videodisks, compressed data transmission, fiber optic technology, and computer networks. Program evaluation is a mandated aspect of the program. This…

32 CFR 2400.46 - Suggestions or complaints.

Code of Federal Regulations, 2014 CFR

2014-07-01

... POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Office of Science and Technology Policy Information Security Program Management § 2400.46... Science and Technology Policy Information Security Program should do so in writing. This correspondence...

32 CFR 2400.46 - Suggestions or complaints.

Code of Federal Regulations, 2012 CFR

2012-07-01

... POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Office of Science and Technology Policy Information Security Program Management § 2400.46... Science and Technology Policy Information Security Program should do so in writing. This correspondence...

32 CFR 2400.46 - Suggestions or complaints.

Code of Federal Regulations, 2010 CFR

2010-07-01

... POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Office of Science and Technology Policy Information Security Program Management § 2400.46... Science and Technology Policy Information Security Program should do so in writing. This correspondence...

32 CFR 2400.46 - Suggestions or complaints.

Code of Federal Regulations, 2011 CFR

2011-07-01

... POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Office of Science and Technology Policy Information Security Program Management § 2400.46... Science and Technology Policy Information Security Program should do so in writing. This correspondence...

32 CFR 2400.46 - Suggestions or complaints.

Code of Federal Regulations, 2013 CFR

2013-07-01

... POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Office of Science and Technology Policy Information Security Program Management § 2400.46... Science and Technology Policy Information Security Program should do so in writing. This correspondence...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

The Berry Informational Technology (B.I.T.S.) Student Work Program: An Effective Environment for Collaborative Learning, Leadership, Technological Training, and Certification.

ERIC Educational Resources Information Center

Cornelius, Amy; Macaluso, Paul

The Berry Informational Technology (B.I.T.S.) program at Berry College (Georgia) is an apprenticeship opportunity associated with student work. The program gives students the opportunity to seek technological training in areas, such as building computer systems, trouble-shooting, networking, Web development, and user and technical support. In…

NASA technology utilization program: The small business market

NASA Technical Reports Server (NTRS)

Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

1980-01-01

Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

Civil space technology initiative

NASA Technical Reports Server (NTRS)

1990-01-01

The Civil Space Technology Initiative (CSTI) is a major, focused, space technology program of the Office of Aeronautics, Exploration and Technology (OAET) of NASA. The program was initiated to advance technology beyond basic research in order to expand and enhance system and vehicle capabilities for near-term missions. CSTI takes critical technologies to the point at which a user can confidently incorporate the new or expanded capabilities into relatively near-term, high-priority NASA missions. In particular, the CSTI program emphasizes technologies necessary for reliable and efficient access to and operation in Earth orbit as well as for support of scientific missions from Earth orbit.

Research and Energy Efficiency: Selected Success Stories

DOE R&D Accomplishments Database

Garland, P. W.; Garland, R. W.

1997-06-26

Energy use and energy technology play critical roles in the U.S. economy and modern society. The Department of Energy (DOE) conducts civilian energy research and development (R&D) programs for the purpose of identifying promising technologies that promote energy security, energy efficiency, and renewable energy use. DOE-sponsored research ranges from basic investigation of phenomena all the way through development of applied technology in partnership with industry. DOE`s research programs are conducted in support of national strategic energy objectives, however austere financial times have dictated that R&D programs be measured in terms of cost vs. benefit. In some cases it is difficult to measure the return on investment for the basic "curiosity-driven" research, however many applied technology development programs have resulted in measurable commercial successes. The DOE has published summaries of their most successful applied technology energy R&D programs. In this paper, we will discuss five examples from the Building Technologies area of the DOE Energy Efficiency program. Each story will describe the technology, discuss the level of federal funding, and discuss the returns in terms of energy savings, cost savings, or national economic impacts.

High-Performance, Space-Storable, Bi-Propellant Program Status

NASA Technical Reports Server (NTRS)

Schneider, Steven J.

2002-01-01

Bipropellant propulsion systems currently represent the largest bus subsystem for many missions. These missions range from low Earth orbit satellite to geosynchronous communications and planetary exploration. The payoff of high performance bipropellant systems is illustrated by the fact that Aerojet Redmond has qualified a commercial NTO/MMH engine based on the high Isp technology recently delivered by this program. They are now qualifying a NTO/hydrazine version of this engine. The advanced rhenium thrust chambers recently provided by this program have raised the performance of earth storable propellants from 315 sec to 328 sec of specific impulse. The recently introduced rhenium technology is the first new technology introduced to satellite propulsion in 30 years. Typically, the lead time required to develop and qualify new chemical thruster technology is not compatible with program development schedules. These technology development programs must be supported by a long term, Base R&T Program, if the technology s to be matured. This technology program then addresses the need for high performance, storable, on-board chemical propulsion for planetary rendezvous and descent/ascent. The primary NASA customer for this technology is Space Science, which identifies this need for such programs as Mars Surface Return, Titan Explorer, Neptune Orbiter, and Europa Lander. High performance (390 sec) chemical propulsion is estimated to add 105% payload to the Mars Sample Return mission or alternatively reduce the launch mass by 33%. In many cases, the use of existing (flight heritage) propellant technology is accommodated by reducing mission objectives and/or increasing enroute travel times sacrificing the science value per unit cost of the program. Therefore, a high performance storable thruster utilizing fluorinated oxidizers with hydrazine is being developed.

NASA programs in technology transfer and their relation to remote sensing education

NASA Technical Reports Server (NTRS)

Weinstein, R. H.

1980-01-01

Technology transfer to users is a central feature of NASA programs. In each major area of responsibility, a variety of mechanisms was established to provide for this transfer of operational capability to the proper end user, be it a Federal agency, industry, or other public sector users. In addition, the Technology Utilization program was established to cut across all program areas and to make available a wealth of 'spinoff' technology (i.e., secondary applications of space technology to ground-based use). The transfer of remote sensing technology, particularly to state and local users, presents some real challenges in application and education for NASA and the university community. The agency's approach to the transfer of remote sensing technology and the current and potential role of universities in the process are considered.

Computing, Information and Communications Technology (CICT) Website

NASA Technical Reports Server (NTRS)

Hardman, John; Tu, Eugene (Technical Monitor)

2002-01-01

The Computing, Information and Communications Technology Program (CICT) was established in 2001 to ensure NASA's Continuing leadership in emerging technologies. It is a coordinated, Agency-wide effort to develop and deploy key enabling technologies for a broad range of mission-critical tasks. The NASA CICT program is designed to address Agency-specific computing, information, and communications technology requirements beyond the projected capabilities of commercially available solutions. The areas of technical focus have been chosen for their impact on NASA's missions, their national importance, and the technical challenge they provide to the Program. In order to meet its objectives, the CICT Program is organized into the following four technology focused projects: 1) Computing, Networking and Information Systems (CNIS); 2) Intelligent Systems (IS); 3) Space Communications (SC); 4) Information Technology Strategic Research (ITSR).

NASA's Next Generation Launch Technology Program - Strategy and Plans

NASA Technical Reports Server (NTRS)

Hueter, Uwe

2003-01-01

The National Aeronautics and Space Administration established a new program office, Next Generation Launch Technology (NGLT) Program Office, last year to pursue technologies for future space launch systems. NGLT will fund research in key technology areas such as propulsion, launch vehicles, operations and system analyses. NGLT is part of NASA s Integrated Space Technology Plan. The NGLT Program is sponsored by NASA s Office of Aerospace Technology and is part of the Space Launch Initiative theme that includes both NGLT and Orbital Space Plane. NGLT will focus on technology development to increase safety and reliability and reduce overall costs associated with building, flying and maintaining the nation s next-generations of space launch vehicles. These investments will be guided by systems engineering and analysis with a focus on the needs of National customers.

Technology transfer

NASA Technical Reports Server (NTRS)

Penaranda, Frank E.

1992-01-01

The topics are presented in viewgraph form and include the following: international comparison of R&D expenditures in 1989; NASA Technology Transfer Program; NASA Technology Utilization Program thrusts for FY 1992 and FY 1993; National Technology Transfer Network; and NTTC roles.

The Superfund Innovative Technology Evaluation Program SUMMARY AND CLOSURE REPORT

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program promoted the development, commercialization, and implementation of innovative hazardous waste treatment technologies for 20 years. SITE offered a mechanism for conducting joint technology demonstration and evaluation ...

Health information technology: standards, implementation specifications, and certification criteria for electronic health record technology, 2014 edition; revisions to the permanent certification program for health information technology. Final rule.

PubMed

2012-09-04

With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

Two-Year ET Programs: Essential Topics and Levels of Proficiency.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

1990-01-01

Reports the results of a survey of graduates, employers, and instructors of engineering technology programs for the essential topics in mechanical engineering technology, mechanical drafting/design technology, manufacturing engineering technology, and industrial engineering technology. Identifies the proficiency level suggested for classwork and…

1992 UPDATE OF U.S. EPA'S SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has encouraged and financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies suitable for use at hazardous waste sites for five year...

Ultra-Efficient Engine Technology (UEET) Program

NASA Technical Reports Server (NTRS)

Manthey, Lori A.

2001-01-01

The Ultra-Efficient Engine Technology (UEET) Program includes seven key projects that work with industry to develop and hand off revolutionary propulsion technologies that will enable future-generation vehicles over a wide range of flight speeds. A new program office, the Ultra-Efficient Engine Technology (UEET) Program Office, was formed at the NASA Glenn Research Center to manage an important National propulsion program for NASA. The Glenn-managed UEET Program, which began on October 1, 1999, includes participation from three other NASA centers (Ames, Goddard, and Langley), as well as five engine companies (GE Aircraft Engines, Pratt & Whitney, Honeywell, Allison/Rolls Royce, and Williams International) and two airplane manufacturers (the Boeing Company and Lockheed Martin Corporation). This 6-year, nearly $300 million program will address local air-quality concerns by developing technologies to significantly reduce nitrogen oxide (NOx) emissions. In addition, it will provide critical propulsion technologies to dramatically increase performance as measured in fuel burn reduction that will enable reductions of carbon dioxide (CO2) emissions. This is necessary to address the potential climate impact of long-term aviation growth.

Research and Technology

NASA Technical Reports Server (NTRS)

1997-01-01

As the NASA Center responsible for preparing and launching space missions, the John F. Kennedy Space Center (KSC) is placing increasing emphasis on its advanced technology development program. This program encompasses the efforts of the entire KSC team, consisting of Government and contractor personnel, working in partnership with academic institutions and commercial industry. This edition of the KSC Research and Technology 1997 Annual Report covers the efforts of these contributors to the KSC advanced technology development program, as well as our technology transfer activities.

Mars base technology program overview

NASA Technical Reports Server (NTRS)

Chu, Chneg-Chih; Hayati, Samad A.; Udomkesmalee, Suraphol

2005-01-01

In this paper, we present an overview of the current technology portfolio for Mars Base Technology Program. Brief descriptions of the awarded technologies and the high-priority areas in both NRAs are provided to show the current focus of MTP. We also present the approach that MTP uses to evaluate technology maturity for each of the technology tasks.

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects at Glenn Research Center for 2015

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

This report is intended to help NASA program and project managers incorporate Glenn Research Center Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) programs and projects. Other Government and commercial project managers can also find this useful. Introduction Incorporating Small Business Innovation Research (SBIR)-developed technology into NASA projects is important, especially given the Agency's limited resources for technology development. The SBIR program's original intention was for technologies that had completed Phase II to be ready for integration into NASA programs, however, in many cases there is a gap between Technology Readiness Levels (TRLs) 5 and 6 that needs to be closed. After SBIR Phase II projects are completed, the technology is evaluated against various parameters and a TRL rating is assigned. Most programs tend to adopt more mature technologies-at least TRL 6 to reduce the risk to the mission rather than adopt TRLs between 3 and 5 because those technologies are perceived as too risky. The gap between TRLs 5 and 6 is often called the "Valley of Death" (Figure 1), and historically it has been difficult to close because of a lack of funding support from programs. Several papers have already suggested remedies on how to close the gap (Refs. 1 to 4).

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Technical Reports Server (NTRS)

1990-01-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Astrophysics Data System (ADS)

1990-07-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

Active coatings technologies for tailorable military coating systems

NASA Astrophysics Data System (ADS)

Zunino, J. L., III

2007-04-01

The main objective of the U.S. Army's Active Coatings Technologies Program is to develop technologies that can be used in combination to tailor coatings for utilization on Army Materiel. The Active Coatings Technologies Program, ACT, is divided into several thrusts, including the Smart Coatings Materiel Program, Munitions Coatings Technologies, Active Sensor packages, Systems Health Monitoring, Novel Technology Development, as well as other advanced technologies. The goal of the ACT Program is to conduct research leading to the development of multiple coatings systems for use on various military platforms, incorporating unique properties such as self repair, selective removal, corrosion resistance, sensing, ability to modify coatings' physical properties, colorizing, and alerting logistics staff when tanks or weaponry require more extensive repair. A partnership between the U.S. Army Corrosion Office at Picatinny Arsenal, NJ along with researchers at the New Jersey Institute of Technology, NJ, Clemson University, SC, University of New Hampshire, NH, and University of Massachusetts (Lowell), MA, are developing the next generation of Smart Coatings Materiel via novel technologies such as nanotechnology, Micro-electromechanical Systems (MEMS), meta-materials, flexible electronics, electrochromics, electroluminescence, etc. This paper will provide the reader with an overview of the Active Coatings Technologies Program, including an update of the on-going Smart Coatings Materiel Program, its progress thus far, description of the prototype Smart Coatings Systems and research tasks as well as future nanotechnology concepts, and applications for the Department of Defense.

1993 UPDATE OF THE U.S. ENVIRONMENTAL PROTECTION AGENCY'S SITE EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

The Emerging Technology Program (ETP), part of the U.S. EPA`s Superfund Innovative Technology Evaluation (SITE) Program, is continuing to create an environment where technical innovation can accelerate into field and commercial applications for treatment of hazardous waste sites....

Space Alliance Technology Outreach Program

NASA Technical Reports Server (NTRS)

2005-01-01

Space Alliance Technology Outreach Program (SATOP), will provide technical assistance to small businesses through the contribution of time and expertise from Space Alliance Partners and support the development and expansion of technology business incubation programs in Florida and New York. A summary of these accomplishments are given.

NASA helicopter transmission system technology program

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.

1983-01-01

The purpose of the NASA Helicopter Transmission System Technology Program is to improve specific mechanical components and the technology for combining these into advanced drive systems to make helicopters more viable and cost competitive for commerical applications. The history, goals, and elements of the program are discussed.

Vehicle Technologies Program Awards and Patents

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-12-13

Award-winning technologies and processes are hallmarks of the programs funded by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, and industrial partners. Awards, patents, and other recognition validate the products of research undertaken as part of the Vehicle Technologies Program.