Rocket-powered single-stage-to-orbit vehicles for safe economical access to low earth orbit

NASA Astrophysics Data System (ADS)

Andrews, D. G.; Davis, E. E.; Bangsund, E. L.

1991-10-01

Rocket-powered SSTO vehicles were investigated during the SSTO technology demonstration contracts. Vehicle configurations were defined to include various technology concepts such as advanced rocket or air breathing engines, takeoff assist options, and advanced high temperature structural materials. Results of these investigations are summarized and performance and turnaround data are presented.

An Investigation of Experienced and Inexperienced Primary School Teachers' Teaching Process in Science and Technology Classes in Terms of Metacognitive Strategies

ERIC Educational Resources Information Center

Doganay, Ahmet; Ozturk, Ayse

2011-01-01

This comparative case study aimed to investigate whether experienced elementary school teachers' science and technology teaching processes differed from inexperienced teachers' teaching processes in terms of using metacognitive strategies. 14 elementary school teachers, including 7 experienced and 7 inexperienced, participated in the study. The…

Faculty Collaboration on Multidisciplinary Web-Based Education.

ERIC Educational Resources Information Center

Saad, Ashraf; Uskov, Vladimir L.; Cedercreutz, Kettil; Geonetta, Sam; Spille, Jack; Abel, Dick

In 1998, faculty members at the University of Cincinnati started a project as an interdepartmental collaboration to investigate the use of World Wide Web-based instructional (WBI) tools. The project team included representatives from various areas such as information engineering technology, mechanical engineering technology, chemical technology,…

University-Industry Entrepreneurship: The Organization and Management of American University Technology Transfer Units.

ERIC Educational Resources Information Center

Dill, David D.

1995-01-01

A survey of 289 university technology transfer units investigated their organization, management, and perceived performance effectiveness. Unit types studied included licensing and patent offices, small business development centers, research and technology centers, business facility incubators, and entrepreneurial investment/endowment offices.…

77 FR 51064 - Dana Holding Corporation, Power Technologies Group Division, Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-81,317] Dana Holding Corporation, Power Technologies Group Division, Including On-Site Leased Workers From Manpower, Milwaukee, WI; Notice... investigation resulted in a negative determination based on the findings that the subject firm did not shift...

Research on the Development of Middle School Mathematics Pre-Service Teachers' Perceptions Regarding the Use of Technology in Teaching Mathematics

ERIC Educational Resources Information Center

Akkaya, Recai

2016-01-01

This study aimed to investigate the changes in teacher perceptions regarding the use of technology subsequent to the training about technology integration in mathematics teaching. A training program that included combined technology, pedagogy and content knowledge was prepared and implemented on pre-service teachers with this aim. Exploratory…

Positive displacement type general-aviation engines: Summary and concluding remarks

NASA Technical Reports Server (NTRS)

Kempke, E. E., Jr.

1980-01-01

The activities of programs investigating various aspects of aircraft internal combustion engines are briefly described including developments in fuel injection technology, cooling systems and drag reduction, turbocharger technology, and stratified-charge rotary engines.

ERTS-B (Earth Resources Technology Satellite). [spacecraft design remote sensor description, and technology utilization

NASA Technical Reports Server (NTRS)

1975-01-01

Mission plans and objectives of the ERTS 2 Satellite are presented. ERTS 2 follow-on investigations in various scientific disciplines including agriculture, meteorology, land-use, geology, water resources, oceanography, and environment are discussed. Spacecraft design and its sensors are described along with the Delta launch vehicle and launch operations. Applications identified from ERTS 1 investigations are summarized.

SEMINAR PUBLICATION: MANAGING ENVIRONMENTAL PROBLEMS AT INACTIVE AND ABANDONED METALS MINE SITES

EPA Science Inventory

Environmental problems associated with abandoned and inactive mines are addressed along with some approaches to resolving those problems, including case studies demonstrating technologies that have worked. New technologies being investigated are addressed also.

A Meta-Analysis of Effectiveness Studies on Computer Technology-Supported Language Learning

ERIC Educational Resources Information Center

Grgurovic, Maja; Chapelle, Carol A.; Shelley, Mack C.

2013-01-01

With the aim of summarizing years of research comparing pedagogies for second/foreign language teaching supported with computer technology and pedagogy not-supported by computer technology, a meta-analysis was conducted of empirical research investigating language outcomes. Thirty-seven studies yielding 52 effect sizes were included, following a…

Digital Technology and Caregiver Training for Older Persons: Cognitive and Affective Perspectives

ERIC Educational Resources Information Center

Zheng, Robert; Hicken, Bret L.; Hill, Robert D.; Luptak, Marilyn; Daniel, Candice M.; Grant, Marren; Rupper, Randall

2016-01-01

This research project included two studies that investigated (a) differences between technology use in tech-knowledgeable and less tech-knowledgeable older persons, (b) cognitive and affective variables and their association with the application of technology, and (c) the implications of these variables on the design of remote-delivered caregiver…

Electronic aroma detection technology for forensic and law enforcement applications

NASA Astrophysics Data System (ADS)

Barshick, Stacy-Ann; Griest, Wayne H.; Vass, Arpad A.

1997-02-01

A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic 'fingerprint' pattern representative of the vapor-phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The result to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

End-to-end remote sensing at the Science and Technology Laboratory of John C. Stennis Space Center

NASA Technical Reports Server (NTRS)

Kelly, Patrick; Rickman, Douglas; Smith, Eric

1991-01-01

The Science and Technology Laboratory (STL) of Stennis Space Center (SSC) was developing an expertise in remote sensing for more than a decade. Capabilities at SSC/STL include all major areas of the field. STL includes the Sensor Development Laboratory (SDL), Image Processing Center, a Learjet 23 flight platform, and on-staff scientific investigators.

Computers in Education: Social, Political, and Historical Perspectives. Media Education Culture Technology.

ERIC Educational Resources Information Center

Muffoletto, Robert, Ed.; Knupfer, Nancy Nelson, Ed.

This book is a collection of new works that inquire into the nature of media and technology as found and practiced in the social world of schooling. It creates a forum for investigating the social, institutional, historical, and epistemological relationships between media, education, culture, and technology. Contributions to the book include:…

Investigation of Moving Belt Radiator Technology Issues

NASA Technical Reports Server (NTRS)

Teagan, W. Peter; Aguilar, Jerry L.

1994-01-01

The development of an advanced spacecraft radiator technology is reported. The moving belt radiator is a thermal radiator concept with the promise of lower specific mass (per kW rejected) than that afforded by existing technologies. The results of a parametric study to estimate radiator mass for future space power systems is presented. It is shown that this technology can be scaled up to 200 MW for higher rejection temperatures. Several aspects of the design concept are discussed, including the dynamics of a large rotating belt in microgravity. The results of a computer code developed to model the belt dynamics are presented. A series of one-g experiments to investigate the dynamics of small belts is described. A comprehensive test program to investigate belt dynamics in microgravity aboard the NASA KC-135 aircraft is discussed. It was found that the desired circular shape can readily be achieved in microgravity. It is also shown that a rotating belt is stable when subjected to simulated attitude control maneuvers. Heat exchanger design is also investigated. Several sealing concepts were examined experimentally, and are discussed. Overall heat transfer coefficients to the rotating belt are presented. Material properties for various belt materials, including screen meshes, are also presented. The results presented in this report indicate that the moving belt radiator concept is technically feasible.

Research review for information management

NASA Technical Reports Server (NTRS)

Bishop, Peter C.

1988-01-01

The goal of RICIS research in information management is to apply currently available technology to existing problems in information management. Research projects include the following: the Space Business Research Center (SBRC), the Management Information and Decision Support Environment (MIDSE), and the investigation of visual interface technology. Several additional projects issued reports. New projects include the following: (1) the AdaNET project to develop a technology transfer network for software engineering and the Ada programming language; and (2) work on designing a communication system for the Space Station Project Office at JSC. The central aim of all projects is to use information technology to help people work more productively.

Investigation of RFID Based Sensors for Sustainable Transportation Applications

DOT National Transportation Integrated Search

2011-01-21

Through support of a University Transportation Research Center Faculty Development Minigrant an investigation was made into the use of RFID based sensing technologies for transportation purposes. Transportation applications would potentially include ...

49 CFR 1.94 - The National Highway Traffic Safety Administration.

Code of Federal Regulations, 2012 CFR

2012-10-01

... information system improvements, motorcyclist safety, and child safety restraints; administering a nationwide... concerning motor vehicle safety, including vehicle to vehicle and vehicle to infrastructure technologies and other new or advanced vehicle technologies; and investigating safety-related defects and non-compliance...

49 CFR 1.94 - The National Highway Traffic Safety Administration.

Code of Federal Regulations, 2014 CFR

2014-10-01

... information system improvements, motorcyclist safety, and child safety restraints; administering a nationwide... concerning motor vehicle safety, including vehicle to vehicle and vehicle to infrastructure technologies and other new or advanced vehicle technologies; and investigating safety-related defects and non-compliance...

49 CFR 1.94 - The National Highway Traffic Safety Administration.

Code of Federal Regulations, 2013 CFR

2013-10-01

... information system improvements, motorcyclist safety, and child safety restraints; administering a nationwide... concerning motor vehicle safety, including vehicle to vehicle and vehicle to infrastructure technologies and other new or advanced vehicle technologies; and investigating safety-related defects and non-compliance...

Gian Porro | NREL

Science.gov Websites

Technical Risk Analysis for the Geothermal Technologies ProgramPDF. Golden, CO: National Renewable Energy analysis and planning activities (PAE Hub) Research Interests Analytical support to Geothermal Technologies Program, including assessment of the competitiveness of geothermal electricity generation Investigation of

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Hanks, G. W.; Shomber, H. A.; Dethman, H. A.; Gratzer, L. B.; Maeshiro, A.; Gangsaas, D.; Blight, J. D.; Buchan, S. M.; Crumb, C. B.; Dorwart, R. J.

1981-01-01

The current status of the Active Controls Technology (ACT) for the advanced subsonic transport project is investigated through analysis of the systems technical data. Control systems technologies under examination include computerized reliability analysis, pitch axis fly by wire actuator, flaperon actuation system design trade study, control law synthesis and analysis, flutter mode control and gust load alleviation analysis, and implementation of alternative ACT systems. Extensive analysis of the computer techniques involved in each system is included.

Study of the application of advanced technologies to long-range transport aircraft. Volume 2: Research and development requirements

NASA Technical Reports Server (NTRS)

Lange, R. H.; Sturgeon, R. F.; Adams, W. E.; Bradley, E. S.; Cahill, J. F.; Eudaily, R. R.; Hancock, J. P.; Moore, J. W.

1972-01-01

Investigations were conducted to evaluate the relative benefits attainable through the exploitation of advanced technologies and to identify future research and development efforts required to permit the application of selected technologies to transport aircraft entering commercial operation in 1985. Results show that technology advances, particularly in the areas of composite materials, supercritical aerodynamics, and active control systems, will permit the development of long-range, high-payload commercial transports operating at high-subsonic speeds with direct operating costs lower than those of current aircraft. These advanced transports also achieve lower noise levels and lower engine pollutant emissions than current transports. Research and development efforts, including analytical investigations, laboratory test programs, and flight test programs, are required in essentially all technology areas to achieve the potential technology benefits.

U.S. Customs Service technology: past, present, and future

NASA Astrophysics Data System (ADS)

Pennella, John J.; Smith, Douglas E.

2001-02-01

This document describes the law enforcement charter and activities of the United States Customs Service and the internal technology organization that supports it, the Applied Technology Division. The enforcement activities of Customs include interdiction, outbound anti-smuggling, investigation and surveillance, processing of documentation and data, and detection of drugs and other contraband. An overview of the various technologies applied in support of these activities over the past 25 years is provided. Additionally, technologies proposed for implementation in the future are discussed.

Development and Applications of Portable Gas Chromatography-Mass Spectrometry for Emergency Responders, the Military, and Law-Enforcement Organizations.

PubMed

Leary, Pauline E; Dobson, Gareth S; Reffner, John A

2016-05-01

Portable gas chromatography-mass spectrometry (GC-MS) systems are being deployed for field use, and are designed with this goal in mind. Performance characteristics of instruments that are successful in the field are different from those of equivalent technologies that are successful in a laboratory setting. These field-portable systems are extending the capabilities of the field user, providing investigative leads and confirmatory identifications in real time. Many different types of users benefit from the availability of this technology including emergency responders, the military, and law-enforcement organizations. This manuscript describes performance characteristics that are important for field-portable instruments, especially field-portable GC-MS systems, and demonstrates the value of this equipment to the disciplines of explosives investigations, fire investigations, and counterfeit-drug detection. This paper describes the current state of portable GC-MS technology, including a review of the development of portable GC-MS, as well as a demonstration of the value of this capability using different examples. © The Author(s) 2016.

Ultra-high heat flux cooling characteristics of cryogenic micro-solid nitrogen particles and its application to semiconductor wafer cleaning technology

NASA Astrophysics Data System (ADS)

Ishimoto, Jun; Oh, U.; Guanghan, Zhao; Koike, Tomoki; Ochiai, Naoya

2014-01-01

The ultra-high heat flux cooling characteristics and impingement behavior of cryogenic micro-solid nitrogen (SN2) particles in relation to a heated wafer substrate were investigated for application to next generation semiconductor wafer cleaning technology. The fundamental characteristics of cooling heat transfer and photoresist removal-cleaning performance using micro-solid nitrogen particulate spray impinging on a heated substrate were numerically investigated and experimentally measured by a new type of integrated computational-experimental technique. This study contributes not only advanced cryogenic cooling technology for high thermal emission devices, but also to the field of nano device engineering including the semiconductor wafer cleaning technology.

Integrating information technologies as tools for surgical research.

PubMed

Schell, Scott R

2005-10-01

Surgical research is dependent upon information technologies. Selection of the computer, operating system, and software tool that best support the surgical investigator's needs requires careful planning before research commences. This manuscript presents a brief tutorial on how surgical investigators can best select these information technologies, with comparisons and recommendations between existing systems, software, and solutions. Privacy concerns, based upon HIPAA and other regulations, now require careful proactive attention to avoid legal penalties, civil litigation, and financial loss. Security issues are included as part of the discussions related to selection and application of information technology. This material was derived from a segment of the Association for Academic Surgery's Fundamentals of Surgical Research course.

Factors influencing acceptance of technology for aging in place: a systematic review.

PubMed

Peek, Sebastiaan T M; Wouters, Eveline J M; van Hoof, Joost; Luijkx, Katrien G; Boeije, Hennie R; Vrijhoef, Hubertus J M

2014-04-01

To provide an overview of factors influencing the acceptance of electronic technologies that support aging in place by community-dwelling older adults. Since technology acceptance factors fluctuate over time, a distinction was made between factors in the pre-implementation stage and factors in the post-implementation stage. A systematic review of mixed studies. Seven major scientific databases (including MEDLINE, Scopus and CINAHL) were searched. Inclusion criteria were as follows: (1) original and peer-reviewed research, (2) qualitative, quantitative or mixed methods research, (3) research in which participants are community-dwelling older adults aged 60 years or older, and (4) research aimed at investigating factors that influence the intention to use or the actual use of electronic technology for aging in place. Three researchers each read the articles and extracted factors. Sixteen out of 2841 articles were included. Most articles investigated acceptance of technology that enhances safety or provides social interaction. The majority of data was based on qualitative research investigating factors in the pre-implementation stage. Acceptance in this stage is influenced by 27 factors, divided into six themes: concerns regarding technology (e.g., high cost, privacy implications and usability factors); expected benefits of technology (e.g., increased safety and perceived usefulness); need for technology (e.g., perceived need and subjective health status); alternatives to technology (e.g., help by family or spouse), social influence (e.g., influence of family, friends and professional caregivers); and characteristics of older adults (e.g., desire to age in place). When comparing these results to qualitative results on post-implementation acceptance, our analysis showed that some factors are persistent while new factors also emerge. Quantitative results showed that a small number of variables have a significant influence in the pre-implementation stage. Fourteen out of the sixteen included articles did not use an existing technology acceptance framework or model. Acceptance of technology in the pre-implementation stage is influenced by multiple factors. However, post-implementation research on technology acceptance by community-dwelling older adults is scarce and most of the factors in this review have not been tested by using quantitative methods. Further research is needed to determine if and how the factors in this review are interrelated, and how they relate to existing models of technology acceptance. Copyright © 2014 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

[Jun TOSAKA's attempt in "Science Aiming to Product": thoroughness of the view of science founded on production].

PubMed

Kitabayashi, Masahiro

2014-01-01

In this paper, the author will make it clear that the main object of "Science Aiming to Product" published in 1941 by Jun TOSAKA (1900-45), based on historical investigation focusing on the role of 'technology' in his theory of ideology. Objects of this investigation will include some papers unrecorded in The Complete Works of Jun TOSAKA. In 1929, he put 'practice' as an important position in his theory of science and ideology, and didn't use 'experiment' or 'technology'. At first, his 'practice' meant 'politics' mainly, then that included meaning of 'experiment' and 'production' too in 1932. Since 1933, he became to put 'technology' as an important position in place of 'practice'. But he had been grasped experiment' as 'practice' until 1941. On the other hand, to grasp 'science' and 'technology' as 'practice' became the mainstream of the press in 1941. In that situation, he reviewed the relationship between 'science' and 'technology'. And he became to grasp 'experiment' as 'material production'. Then he could make the view of science founded on production thorough.

Technology Needs Assessment of an Atmospheric Observation System for Multidisciplinary Air Quality/Meteorology Missions, Part 2

NASA Technical Reports Server (NTRS)

Alvarado, U. R.; Bortner, M. H.; Grenda, R. N.; Brehm, W. F.; Frippel, G. G.; Alyea, F.; Kraiman, H.; Folder, P.; Krowitz, L.

1982-01-01

The technology advancements that will be necessary to implement the atmospheric observation systems are considered. Upper and lower atmospheric air quality and meteorological parameters necessary to support the air quality investigations were included. The technology needs were found predominantly in areas related to sensors and measurements of air quality and meteorological measurements.

The 1991 research and technology report, Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Soffen, Gerald (Editor); Ottenstein, Howard (Editor); Montgomery, Harry (Editor); Truszkowski, Walter (Editor); Frost, Kenneth (Editor); Sullivan, Walter (Editor); Boyle, Charles (Editor)

1991-01-01

The 1991 Research and Technology Report for Goddard Space Flight Center is presented. Research covered areas such as (1) earth sciences including upper atmosphere, lower atmosphere, oceans, hydrology, and global studies; (2) space sciences including solar studies, planetary studies, Astro-1, gamma ray investigations, and astrophysics; (3) flight projects; (4) engineering including robotics, mechanical engineering, electronics, imaging and optics, thermal and cryogenic studies, and balloons; and (5) ground systems, networks, and communications including data and networks, TDRSS, mission planning and scheduling, and software development and test.

Investigate Fundamentals and Performance Improvements of Current In-Line Inspection Technologies for Mechanical Damage Detection

DOT National Transportation Integrated Search

2008-05-01

This Phase I report provides a comprehensive and in-depth review of the current status of in-line inspection technologies, including, but not limited to, Magnetic (Axial MFL, Circumferential MFL), Ultrasonic (UT), and Geometrical (Caliper) methods, i...

Investigating preferences for mosquito-control technologies in Mozambique with latent class analysis.

PubMed

Smith, Rachel A; Barclay, Victoria C; Findeis, Jill L

2011-07-21

It is common practice to seek the opinions of future end-users during the development of innovations. Thus, the aim of this study is to investigate latent classes of users in Mozambique based on their preferences for mosquito-control technology attributes and covariates of these classes, as well as to explore which current technologies meet these preferences. Surveys were administered in five rural villages in Mozambique. The data were analysed with latent class analysis. This study showed that users' preferences for malaria technologies varied, and people could be categorized into four latent classes based on shared preferences. The largest class, constituting almost half of the respondents, would not avoid a mosquito-control technology because of its cost, heat, odour, potential to make other health issues worse, ease of keeping clean, or inadequate mosquito control. The other three groups are characterized by the attributes which would make them avoid a technology; these groups are labelled as the bites class, by-products class, and multiple-concerns class. Statistically significant covariates included literacy, self-efficacy, willingness to try new technologies, and perceived seriousness of malaria for the household. To become widely diffused, best practices suggest that end-users should be included in product development to ensure that preferred attributes or traits are considered. This study demonstrates that end-user preferences can be very different and that one malaria control technology will not satisfy everyone.

Use of WebQuest Design for Inservice Teacher Professional Development

ERIC Educational Resources Information Center

Iskeceli-Tunc, Sinem; Oner, Diler

2016-01-01

This study investigated whether a teacher professional development module built around designing WebQuests could improve teachers' technological and pedagogical skills. The technological skills examined included Web searching and Web evaluating skills. The pedagogical skills targeted were developing a working definition for higher-order thinking…

The Road Ahead: State of the Industry 2001.

ERIC Educational Resources Information Center

Kiser, Kim

2001-01-01

Presents results of a survey of electronic learning that investigated how organizations are using electronic learning, the technology being used to deliver it, and whether it's helping to accomplish goals. Highlights include convenience; learning management systems; use of technology for training; satisfaction; effectiveness; support and spending;…

Technology, Disability, and Law: Then and Now

ERIC Educational Resources Information Center

Dalsen, Jennifer

2017-01-01

Disability law and technology services share a rich history. This article investigates this transformative relationship through the contextual framework of the Individuals with Disabilities Education Act. A summary of legal cases, accommodation services, and barriers to access are explored. This includes an overview of the challenges facing…

Psychosocial interventions for technological addictions

PubMed Central

Sharma, Manoj Kumar; Palanichamy, Thamil Selvan

2018-01-01

Increase in the use of technology has led to an increase in various kinds of technological addictions. A range of psychological and behavioural theories has been proposed to explain technology addictions. These include learning theories, reward-deficiency hypothesis, impulsivity, cognitive-behavioural models and social skills deficiency theories. While no particular form of psychological intervention has been suggested as being the golden standard for its treatment, the most frequently investigated approaches have been cognitive behavioural therapy (CBT) and motivational enhancement therapy. Given the need for the use of technology in daily living, controlled use has taken precedence over complete abstinence as the goal of treatment for technology addictions. Therapeutic techniques suggested for internet addiction include practicing the opposite, using external stoppers, setting goals, selective abstinence from certain applications, using cues, making personal inventories, joining support groups and family therapy interventions. PMID:29540928

An interstellar precursor mission

NASA Technical Reports Server (NTRS)

Jaffe, L. D.; Ivie, C.; Lewis, J. C.; Lipes, R. G.; Norton, H. N.; Stearns, J. W.; Stimpson, L.; Weissman, P.

1977-01-01

A mission out of the planetary system, with launch about the year 2000, could provide valuable scientific data as well as test some of the technology for a later mission to another star. Primary scientific objectives for the precursor mission concern characteristics of the heliopause, the interstellar medium, stellar distances (by parallax measurements), low energy cosmic rays, interplanetary gas distribution, and mass of the solar system. Secondary objectives include investigation of Pluto. Candidate science instruments are suggested. Individual spacecraft systems for the mission were considered, technology requirements and problem areas noted, and a number of recommendations made for technology study and advanced development. The most critical technology needs include attainment of 50-yr spacecraft lifetime and development of a long-life NEP system.

Using Mobile Technology to Support Literacy Coaching Practices

ERIC Educational Resources Information Center

Bates, C. C.; Martin, Aqueasha

2013-01-01

This article examines literacy coaches' (n = 7) digital note-taking practices using mobile technology and their influence on reflective practice. The study, which employed a design-based approach, investigated the coaches' transition from note-taking by paper and pencil to the note-taking application Evernote. Data included interviews with the…

Telepresence-Enabled Remote Fieldwork: Undergraduate Research in the Deep Sea

ERIC Educational Resources Information Center

Stephens, A. Lynn; Pallant, Amy; McIntyre, Cynthia

2016-01-01

Deep-sea research is rarely available to undergraduate students. However, as telepresence technology becomes more available, doors may open for more undergraduates to pursue research that includes remote fieldwork. This descriptive case study is an initial investigation into whether such technology might provide a feasible opportunity for…

User Perspectives of the Future of the Internet.

ERIC Educational Resources Information Center

Barr, Trevor

This paper presents user perspectives on the future of the Internet. The first section discusses understanding users, including the difference between technology service offerings and potential uses, the need for investigation into the relationship between new communications technology and social behavior, and the shift from supply-led development…

THE AFFORDABLE BIOSHELTERS PROJECT: TESTING INNOVATIVE TECHNOLOGIES, WORKING TO MAKE HIGH PERFORMANCE SOLAR GREENHOUSES COST COMPETITIVE

EPA Science Inventory

The economic feasibility and limitations of technologies investigated will be evaluated, including for liquid foam insulation, subsoil heat storages, and compost exhaust heating. These systems will save most of the energy and money spent to heat greenhouses in exchange for a h...

Mirrors of Minds: Patterns of Experience in Educational Computing.

ERIC Educational Resources Information Center

Pea, Roy D., Ed.; Sheingold, Karen, Ed.

This publication presents selected papers that address certain questions that are being investigated by Bank Street College's Center for Children and Technology (CCT). CCT's researchers are working to help define new research inquiries and to document students' and teachers' uses and understandings of educational technologies. Included in this…

Public funding of pharmaceuticals in The Netherlands: investigating the effect of evidence, process and context on CVZ decision-making.

PubMed

Cerri, Karin H; Knapp, Martin; Fernandez, Jose-Luis

2014-09-01

The College Voor Zorgverzekeringen (CVZ) provides guidance to the Dutch healthcare system on funding and use of new pharmaceutical technologies. This study examined the impact of evidence, process and context factors on CVZ decisions in 2004-2009. A data set of CVZ decisions pertaining to pharmaceutical technologies was created, including 29 variables extracted from published information. A three-category outcome variable was used, defined as the decision to 'recommend', 'restrict' or 'not recommend' a technology. Technologies included in list 1A/1B or on the expensive drug list were considered recommended; those included in list 2 or for which patient co-payment is required were considered restricted; technologies not included on any reimbursement list were classified as 'not recommended'. Using multinomial logistic regression, the relative contribution of explanatory variables on CVZ decisions was assessed. In all, 244 technology appraisals (256 technologies) were analysed, with 51%, of technologies recommended, 33% restricted and 16% not recommended by CVZ for funding. The multinomial model showed significant associations (p ≤ 0.10) between CVZ outcome and several variables, including: (1) use of an active comparator and demonstration of statistical superiority of the primary endpoint in clinical trials, (2) pharmaceutical budget impact associated with introduction of the technology, (3) therapeutic indication and (4) prevalence of the target population. Results confirm the value of a comprehensive and multivariate approach to understanding CVZ decision-making.

Energy requirement for the production of silicon solar arrays

NASA Technical Reports Server (NTRS)

Lindmayer, J.; Wihl, M.; Scheinine, A.; Rosenfield, T.; Wrigley, C. Y.; Morrison, A.; Anderson, J.; Clifford, A.; Lafky, W.

1977-01-01

The results of a study to investigate the feasibility of manufacturing photovoltaic solar array modules by the use of energy obtained from similar or identical photovoltaic sources are presented. The primary objective of this investigation was the characterization of the energy requirements of current and developing technologies which comprise the photovoltaic field. For cross-checking the energies of prevailing technologies data were also used and the wide-range assessment of alternative technologies included different refinement methods, various ways of producing light sheets, semicrystalline cells, etc. Energy data are utilized to model the behavior of a future solar breeder plant under various operational conditions.

Alternative Solvents and Technologies for Precision Cleaning of Aerospace Components

NASA Technical Reports Server (NTRS)

Grandelli, Heather; Maloney, Phillip; DeVor, Robert; Hintze, Paul

2014-01-01

Precision cleaning solvents for aerospace components and oxygen fuel systems, including currently used Vertrel-MCA, have a negative environmental legacy, high global warming potential, and have polluted cleaning sites. Thus, alternative solvents and technologies are being investigated with the aim of achieving precision contamination levels of less than 1 mg/sq ft. The technologies being evaluated are ultrasonic bath cleaning, plasma cleaning and supercritical carbon dioxide cleaning.

Orthotic devices using lightweight composite materials

NASA Technical Reports Server (NTRS)

Harrison, E., Jr.

1983-01-01

Potential applications of high strength, lightweight composite technology in the orthotic field were studied. Several devices were designed and fabricated using graphite-epoxy composite technology. Devices included shoe plates, assistive walker devices, and a Simes prosthesis reinforcement. Several other projects having medical application were investigated and evaluations were made of the potential for use of composite technology. A seat assembly was fabricated using sandwich construction techniques for the Total Wheelchair Project.

A systematic review of the technology-based assessment of visual perception and exploration behaviour in association football.

PubMed

McGuckian, Thomas B; Cole, Michael H; Pepping, Gert-Jan

2018-04-01

To visually perceive opportunities for action, athletes rely on the movements of their eyes, head and body to explore their surrounding environment. To date, the specific types of technology and their efficacy for assessing the exploration behaviours of association footballers have not been systematically reviewed. This review aimed to synthesise the visual perception and exploration behaviours of footballers according to the task constraints, action requirements of the experimental task, and level of expertise of the athlete, in the context of the technology used to quantify the visual perception and exploration behaviours of footballers. A systematic search for papers that included keywords related to football, technology, and visual perception was conducted. All 38 included articles utilised eye-movement registration technology to quantify visual perception and exploration behaviour. The experimental domain appears to influence the visual perception behaviour of footballers, however no studies investigated exploration behaviours of footballers in open-play situations. Studies rarely utilised representative stimulus presentation or action requirements. To fully understand the visual perception requirements of athletes, it is recommended that future research seek to validate alternate technologies that are capable of investigating the eye, head and body movements associated with the exploration behaviours of footballers during representative open-play situations.

Euler Technology Assessment for Preliminary Aircraft Design-Unstructured/Structured Grid NASTD Application for Aerodynamic Analysis of an Advanced Fighter/Tailless Configuration

NASA Technical Reports Server (NTRS)

Michal, Todd R.

1998-01-01

This study supports the NASA Langley sponsored project aimed at determining the viability of using Euler technology for preliminary design use. The primary objective of this study was to assess the accuracy and efficiency of the Boeing, St. Louis unstructured grid flow field analysis system, consisting of the MACGS grid generation and NASTD flow solver codes. Euler solutions about the Aero Configuration/Weapons Fighter Technology (ACWFT) 1204 aircraft configuration were generated. Several variations of the geometry were investigated including a standard wing, cambered wing, deflected elevon, and deflected body flap. A wide range of flow conditions, most of which were in the non-linear regimes of the flight envelope, including variations in speed (subsonic, transonic, supersonic), angles of attack, and sideslip were investigated. Several flowfield non-linearities were present in these solutions including shock waves, vortical flows and the resulting interactions. The accuracy of this method was evaluated by comparing solutions with test data and Navier-Stokes solutions. The ability to accurately predict lateral-directional characteristics and control effectiveness was investigated by computing solutions with sideslip, and with deflected control surfaces. Problem set up times and computational resource requirements were documented and used to evaluate the efficiency of this approach for use in the fast paced preliminary design environment.

E-Books Go to College.

ERIC Educational Resources Information Center

Bell, Lori; McCoy, Virginia; Peters, Tom

2002-01-01

Describes a study that investigated the use of electronic book devices by college students, professors, and librarians. Topics include the use of personal digital assistants (PDAs); challenges for libraries, including policies for PDAs; technological problems with PDAs; and student attitudes. (LRW)

Seeing Science

ERIC Educational Resources Information Center

Miles, Rhea; Zambone, Alana

2017-01-01

Students who are blind or visually impaired (BVI), like all students, need to conduct scientific investigations that involve measurements and reading experimental procedures. Best instructional practices for BVI students include touch and hearing experiences. Related strategies and tools include electronic textbooks, assistive technologies such as…

Attitude of Teachers and Students towards Formal Learning through Online Social Networks

ERIC Educational Resources Information Center

Akbari, Elham; Naderi, Ahmad; Yazdi, Mahdi Hosseinzadeh; Simons, Robert Jan; Pilot, Albert

2016-01-01

Despite the potential of social networks in formal learning, there should be more knowledge on the students and teachers attitudes toward such technology and more recent information in the context of the actual educational situation. The Technology Acceptance Model (TAM) was used. The instruments included a questionnaire investigate the attitudes…

Learning in Context: Technology Integration in a Teacher Preparation Program Informed by Situated Learning Theory

ERIC Educational Resources Information Center

Bell, Randy L.; Maeng, Jennifer L.; Binns, Ian C.

2013-01-01

This investigation explores the effectiveness of a teacher preparation program aligned with situated learning theory on preservice science teachers' use of technology during their student teaching experiences. Participants included 26 preservice science teachers enrolled in a 2-year Master of Teaching program. A specific program goal was to…

Successful Information and Communication Technology Implementation Strategies for Rural Communities: An Investigation of Tech-Based Economic Development Programs

ERIC Educational Resources Information Center

Sullivan, Donna Annette

2009-01-01

Many rural communities across America face several obstacles in the implementation of information and communication technologies (ICTs) initiatives and struggle with the best approaches for leveraging these elements into an economic development strategy. These obstacles include: lack of quality local ICTs infrastructure, funding, inability to…

IN-SITU DUOX™ CHEMICAL OXIDATION TECHNOLOGY TO TREAT CHLORINATED ORGANICS AT THE ROOSEVELT MILLS SITE, VERNON, CT: SITE CHARACTERIZATION AND TREATABILITY STUDY

EPA Science Inventory

A study was performed investigating the feasibility of applying the DUOX™ chemical oxidation technology to chlorinated solvent contaminated media at the Roosevelt Mills site in Vernon, Connecticut. The Roosevelt Mills site is a former woolen mill that included dry cleaning operat...

Children, Technology, and Instruction: A Case Study of Elementary School Children Using an Online Public Access Catalog (OPAC).

ERIC Educational Resources Information Center

Solomon, Paul

1994-01-01

Examines elementary school students' use of an online public access catalog to investigate the interaction between children, technology, curriculum, instruction, and learning. Highlights include patterns of successes and breakdowns; search strategies; instructional approaches and childrens' interests; structure of interaction; search terms; and…

A Narrative of Teacher Education in Canada: Multiculturalism, Technology, Bridging Theory and Practice

ERIC Educational Resources Information Center

Howe, Edward R.

2014-01-01

This narrative paper investigates a number of enduring and emerging themes reflecting teacher education in Canada over the past 40 years, including changes in information and communication technology, bridging gaps in theory and practice, English as a second language, French immersion and multicultural teacher development. Canadian teacher…

"Learning on the Move": The Behavioural Intentions of Nigerian Students with Disabilities

ERIC Educational Resources Information Center

Oladejo, Maruff Akinwale; Adetoro, Jeremiah Adeniran; Oyebade, Stephen Adebanjo; Adedoyin, Adenike Omowunmi Fagunwa

2018-01-01

There has been an increased global attention on the need to make education more flexible and accessible due to the advent of modern mobile technologies. These modern mobile technologies enable people including those with disabilities to receive education anywhere and anytime. This study therefore investigated the behavioural intentions of Nigerian…

Considerations for site-specific implementation of active downforce and seeding depth technologies on row-crop planters

USDA-ARS?s Scientific Manuscript database

Planter technology continues to rapidly advance including row-by-row control of parameters such as applied downforce and seeding depth that permit real-time adjustment to varying field conditions. The objective of this research was to investigate the relationship of seeding depth and applied downfo...

EVA Communications Avionics and Informatics

NASA Technical Reports Server (NTRS)

Carek, David Andrew

2005-01-01

The Glenn Research Center is investigating and developing technologies for communications, avionics, and information systems that will significantly enhance extra vehicular activity capabilities to support the Vision for Space Exploration. Several of the ongoing research and development efforts are described within this presentation including system requirements formulation, technology development efforts, trade studies, and operational concept demonstrations.

15 CFR 270.205 - Reports.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.205 Reports. (a) Not later than 90 days after completing an investigation, a Team shall issue a public report which includes: (1) An analysis of the likely technical cause...

15 CFR 270.205 - Reports.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS Investigations § 270.205 Reports. (a) Not later than 90 days after completing an investigation, a Team shall issue a public report which includes: (1) An analysis of the likely technical cause...

General Aviation Turbine Engine (GATE) study

NASA Technical Reports Server (NTRS)

Baerst, C. F.; Furst, D. G.

1979-01-01

The feasibility of turbine engines for the smaller general aviation aircraft was investigated and a technology program for developing the necessary technology was identified. Major results included the definition of the 1988 general aviation market, the identification of turboprop and turboshaft engines that meet the requirements of the aircraft studies, a benefit analysis showing the superiority of gas turbine engines for portions of the market studied, and detailed plans for the development of the necessary technology.

Prospects for Geostationary Doppler Weather Radar

NASA Technical Reports Server (NTRS)

Tanelli, Simone; Fang, Houfei; Durden, Stephen L.; Im, Eastwood; Rhamat-Samii, Yahya

2009-01-01

A novel mission concept, namely NEXRAD in Space (NIS), was developed for detailed monitoring of hurricanes, cyclones, and severe storms from a geostationary orbit. This mission concept requires a space deployable 35-m diameter reflector that operates at 35-GHz with a surface figure accuracy requirement of 0.21 mm RMS. This reflector is well beyond the current state-of-the-art. To implement this mission concept, several potential technologies associated with large, lightweight, spaceborne reflectors have been investigated by this study. These spaceborne reflector technologies include mesh reflector technology, inflatable membrane reflector technology and Shape Memory Polymer reflector technology.

Technology and its role in rehabilitation for people with cognitive-communication disability following a traumatic brain injury (TBI).

PubMed

Brunner, Melissa; Hemsley, Bronwyn; Togher, Leanne; Palmer, Stuart

2017-01-01

To review the literature on communication technologies in rehabilitation for people with a traumatic brain injury (TBI), and: (a) determine its application to cognitive-communicative rehabilitation, and b) develop a model to guide communication technology use with people after TBI. This integrative literature review of communication technology in TBI rehabilitation and cognitive-communication involved searching nine scientific databases and included 95 studies. Three major types of communication technologies (assistive technology, augmentative and alternative communication technology, and information communication technology) and multiple factors relating to use of technology by or with people after TBI were categorized according to: (i) individual needs, motivations and goals; (ii) individual impairments, activities, participation and environmental factors; and (iii) technologies. While there is substantial research relating to communication technologies and cognitive rehabilitation after TBI, little relates specifically to cognitive-communication rehabilitation. Further investigation is needed into the experiences and views of people with TBI who use communication technologies, to provide the 'user' perspective and influence user-centred design. Research is necessary to investigate the training interventions that address factors fundamental for success, and any impact on communication. The proposed model provides an evidence-based framework for incorporating technology into speech pathology clinical practice and research.

Baseline Study Methodology for Future Phases of Research on Nuclear Power Plant Control Room Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Le Blanc, Katya Lee; Bower, Gordon Ross; Hill, Rachael Ann

In order to provide a basis for industry adoption of advanced technologies, the Control Room Upgrades Benefits Research Project will investigate the benefits of including advanced technologies as part of control room modernization This report describes the background, methodology, and research plan for the first in a series of full-scale studies to test the effects of advanced technology in NPP control rooms. This study will test the effect of Advanced Overview Displays in the partner Utility’s control room simulator

Advances in graphene-related technologies: synthesis, devices and outlook.

PubMed

Frazier, R M; Hough, W L; Chopra, N; Hathcock, K W

2012-06-01

Graphene has been the subject of many scientific investigations since exfoliation methods facilitated isolation of the two-dimensional material. During this time, new synthesis methods have been developed which have opened technological opportunities previously hindered by synthetic constraints. An update on the recent advances in graphene-based technologies, including synthesis and applications into electrical, mechanical and thermal uses will be covered. A special focus on the patent space and commercial landscape will be given in an effort to identify current trends and future commercialization of graphene-related technologies.

Advanced Technology: It's Available at JPL

NASA Technical Reports Server (NTRS)

Edberg, James R.

1996-01-01

Non-NASA activities at JPL are the province of the JPL Technology and Applications Programs Directorate, and include working relationships with industry, academia, and other government agencies. Within this Directorate, the JPL Undersea Technology Program endeavors to apply and transfer these capabilities to the area of underwater research and operations. Of particular interest may be a Reversed Electron Attachment Detector (READ). It is a man-portable device capabable of unambiguous detection of unique chemical signatures associated with mines. In addition, there are other JPL technologies which merit investigation for marine applications.

Children linking science and technology in the primary classroom

NASA Astrophysics Data System (ADS)

Jane, Beverley L.

1995-06-01

This research project exemplifies how technology can facilitate scientific investigations. It also highlights how enthusiastic children can be when they are encouraged to pose their own questions and take responsibility for finding the answers. Year 5 children, working in groups, were involved in designing, making and appraising catchers and enclosures used to investigate small animals found within their school's grounds. A videotape of this project was made and should be a valuable resource for the professional development of both trainee and practising teachers. Included in the tape are children's spontaneous comments, their concern for animal welfare, and reflection on the various aspects of their investigations.

The Learning Environment Associated with Information Technology Education in Taiwan: Combining Psychosocial and Physical Aspects

ERIC Educational Resources Information Center

Liu, Chia-Ju; Zandvliet, David B.; Hou, I.-Ling

2012-01-01

This study investigated perceptions of senior high school students towards the Taiwanese information technology (IT) classroom with the What Is Happening in this Class? (WIHIC) survey and explored the physical learning environment of the IT classroom using the Computerised Classroom Environment Inventory (CCEI). The participants included 2,869…

The Scope of Assistive Technology in Learning Process of Students with Blindness

ERIC Educational Resources Information Center

Saleem, Saira; Sajjad, Shahida

2016-01-01

This study was carried out to investigate the scope of assistive technology in learning process of students with blindness. The sample of this study included 56 students with blindness between the ages of 11-22 years from secondary level of education. These students were selected through convenient sampling from five special schools located in…

Integrating Technology, Curriculum, and Online Resources: A Multilevel Model Study of Impacts on Science Teachers and Students

ERIC Educational Resources Information Center

Ye, Lei

2013-01-01

This scale-up study investigated the impact of a teacher technology tool (Curriculum Customization Service, CCS), curriculum, and online resources on earth science teachers' attitudes, beliefs, and practices and on students' achievement and engagement with science learning. Participants included 73 teachers and over 2,000 ninth-grade students…

Principals' Personal Variables and Information and Communication Technology Utilization in Federal Capital Territory Senior Secondary Schools, Abuja, Nigeria

ERIC Educational Resources Information Center

Ogunshola, Roseline Folashade; Adeniyi, Abiodun

2017-01-01

The study investigated principals' personal variables and information and communication technology utilization in Federal Capital Territory (FCT) senior secondary schools, Abuja, Nigeria. The study adopted the correlational research design. The study used a sample of 94 senior secondary schools (including public and private) in FCT. Stratified…

Why Do Students Use Mobile Technology for Social Purposes during Class? Modeling Teacher Credibility, Learner Empowerment, and Online Communication Attitude as Predictors

ERIC Educational Resources Information Center

Ledbetter, Andrew M.; Finn, Amber N.

2016-01-01

Following research indicating prevalent and deleterious use of social communication technology in college classrooms, this study investigated teacher credibility, learner empowerment, and online communication attitude as predictors of such use. The sample included 379 participants who completed an online survey about a college course. Results…

Post-Disaster Safety Net: Instituting Leadership, Economic and Technological Arrangements

ERIC Educational Resources Information Center

Akaiso, Darlington

2013-01-01

This dissertation will present the findings of an in-depth study conducted on flood victims in Bangkok, Thailand. The objective of this study is to explore the feasibility of using modern technologies as a post-crisis remediation strategy to reconnect displaced families in the aftermath of a disaster. This will include investigating which modern…

Researching Instructional Use and the Technology Acceptation of Learning Management Systems by Secondary School Teachers

ERIC Educational Resources Information Center

De Smet, Cindy; Bourgonjon, Jeroen; De Wever, Bram; Schellens, Tammy; Valcke, Martin

2012-01-01

The aim of this large-scale study was to understand the technology acceptation of learning management systems (LMS) by secondary school teachers and to investigate the instructional use of LMS, distinguishing between informational use and communicational use. The predictive model further includes: perceived usefulness, perceived ease of use,…

Investigating the Antioxidant Capacity of Fruits and Fruit Byproducts through an Introductory Food Chemistry Experiment for High School

ERIC Educational Resources Information Center

Soares, Cristina; Correia, Manuela; Delerue-Matos, Cristina; Barroso, M. Fátima

2017-01-01

This paper reports a laboratorial internship included in the Portuguese Science and Technology promotion program "Internships for Young People in Laboratories (Ciência Viva no Laboratório)", which provided high school students an opportunity to approach the reality of scientific and technological research in a higher education…

The Impact of Information and Communication Technology (ICT) on the Management Practices of Malaysian Smart Schools

ERIC Educational Resources Information Center

Zain, Muhammad Z. M.; Atan, Hanafi; Idrus, Rozhan M.

2004-01-01

The impact of Information and Communication Technology (ICT) on the management practices in the Malaysian Smart Schools was investigated. The analysis revealed that the impact has resulted in changes that include the enrichment of the ICT culture among students and teachers, more efficient student and teacher administration, better accessibility…

Ethical Considerations in Tissue Engineering Research: Case Studies in Translation

PubMed Central

Baker, Hannah B.; McQuilling, John P.

2016-01-01

Tissue engineering research is a complex process that requires investigators to focus on the relationship between their research and anticipated gains in both knowledge and treatment improvements. The ethical considerations arising from tissue engineering research are similarly complex when addressing the translational progression from bench to bedside, and investigators in the field of tissue engineering act as moral agents at each step of their research along the translational pathway, from early benchwork and preclinical studies to clinical research. This review highlights the ethical considerations and challenges at each stage of research, by comparing issues surrounding two translational tissue engineering technologies: the bioartificial pancreas and a tissue engineered skeletal muscle construct. We present relevant ethical issues and questions to consider at each step along the translational pathway, from the basic science bench to preclinical research to first-in-human clinical trials. Topics at the bench level include maintaining data integrity, appropriate reporting and dissemination of results, and ensuring that studies are designed to yield results suitable for advancing research. Topics in preclinical research include the principle of “modest translational distance” and appropriate animal models. Topics in clinical research include key issues that arise in early-stage clinical trials, including selection of patient-subjects, disclosure of uncertainty, and defining success. The comparison of these two technologies and their ethical issues brings to light many challenges for translational tissue engineering research and provides guidance for investigators engaged in development of any tissue engineering technology. PMID:26282436

Ethical considerations in tissue engineering research: Case studies in translation.

PubMed

Baker, Hannah B; McQuilling, John P; King, Nancy M P

2016-04-15

Tissue engineering research is a complex process that requires investigators to focus on the relationship between their research and anticipated gains in both knowledge and treatment improvements. The ethical considerations arising from tissue engineering research are similarly complex when addressing the translational progression from bench to bedside, and investigators in the field of tissue engineering act as moral agents at each step of their research along the translational pathway, from early benchwork and preclinical studies to clinical research. This review highlights the ethical considerations and challenges at each stage of research, by comparing issues surrounding two translational tissue engineering technologies: the bioartificial pancreas and a tissue engineered skeletal muscle construct. We present relevant ethical issues and questions to consider at each step along the translational pathway, from the basic science bench to preclinical research to first-in-human clinical trials. Topics at the bench level include maintaining data integrity, appropriate reporting and dissemination of results, and ensuring that studies are designed to yield results suitable for advancing research. Topics in preclinical research include the principle of "modest translational distance" and appropriate animal models. Topics in clinical research include key issues that arise in early-stage clinical trials, including selection of patient-subjects, disclosure of uncertainty, and defining success. The comparison of these two technologies and their ethical issues brings to light many challenges for translational tissue engineering research and provides guidance for investigators engaged in development of any tissue engineering technology. Copyright © 2015 Elsevier Inc. All rights reserved.

The human role in space. Volume 2: Research analysis and technology report

NASA Technical Reports Server (NTRS)

1984-01-01

The human role in space was studied. The role and the degree of direct involvement of humans that will be required in future space missions are investigated. Valid criteria for allocating functional activities between humans and machines were established. The technology requirements, economics, and benefits of the human presence in space was examined. Topics discussed include: human qualifications for space activities; specific project assessments; technology requirements and tasks; and generalization on human roles in space.

Information Technologies in the Health Care System. Hearing before the Subcommittee on Investigations and Oversight of the Committee on Science and Technology. U.S. House of Representatives, Ninety-Ninth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

Hearings on the use of computer technology in the health care field are presented to provide information needed by Congress and the Food and Drug Administration to make future policies. Medical computing systems can make interpretations of data on the patient's health and can generate diagnostic recommendations to the physician. Included are…

The emergence of diagnostic imaging technologies in breast cancer: discovery, regulatory approval, reimbursement, and adoption in clinical guidelines.

PubMed

Gold, Laura S; Klein, Gregory; Carr, Lauren; Kessler, Larry; Sullivan, Sean D

2012-01-25

In this article, we trace the chronology of developments in breast imaging technologies that are used for diagnosis and staging of breast cancer, including mammography, ultrasonography, magnetic resonance imaging, computed tomography, and positron emission tomography. We explore factors that affected clinical acceptance and utilization of these technologies from discovery to clinical use, including milestones in peer-reviewed publication, US Food and Drug Administration approval, reimbursement by payers, and adoption into clinical guidelines. The factors driving utilization of new imaging technologies are mainly driven by regulatory approval and reimbursement by payers rather than evidence that they provide benefits to patients. Comparative effectiveness research can serve as a useful tool to investigate whether these imaging modalities provide information that improves patient outcomes in real-world settings.

Recent cryocooler progress in Japan

NASA Technical Reports Server (NTRS)

Matsubara, Y.

1985-01-01

The progress of cryocoolers and related devices in Japan is reviewed. The Japanese National Railways has developed the light weight 4 K on-board refrigerators since 1977 as part of the MAGLEV train program. Superconducting and cryogenic fundamental technology was examined which included high performance cryocooler, magnetic refrigerator and superfluid refrigeration. Space cryogenics such as the cooling systems of IR-detectors was studied. Cryocooler for special applications such as cryopump, NMR-CT and JJ devices was investigated. Compact heat exchangers, high performance regenerators and reliable compressors are investigated as a critical component technology.

Coupled Physical/Chemical and Biofiltration Technologies to Reduce Air Emissions from Forest Products Industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gary D. McGinnis

2001-12-31

The research is a laboratory and bench-scale investigation of a system to concentrate and destroy volatile organic compounds (VOCs), including hazardous air pollutants, formed from the drying of wood and the manufacture of wood board products (e.g., particle board and oriented strandboard). The approach that was investigated involved concentrating the dilute VOCs (<500 ppmv) with a physical/chemical adsorption unit, followed by the treatment of the concentrated voc stream (2,000 to 2,500 ppmv) with a biofiltration unit. The research program lasted three years, and involved three research organizations. Michigan Technological University was the primary recipient of the financial assistance, the USDAmore » Forest Products Laboratory (FPL) and Mississippi State University (MSU) were subcontractors to MTU. The ultimate objective of this research was to develop a pilot-scale demonstration of the technology with sufficient data to provide for the design of an industrial system. No commercialization activities were included in this project.« less

Renewable Energy Optimization Report for Naval Station Newport

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robichaud, R.; Mosey, G.; Olis, D.

2012-02-01

In 2008, the U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage the development of renewable energy (RE) on potentially contaminated land and mine sites. As part of this effort, EPA is collaborating with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to evaluate RE options at Naval Station (NAVSTA) Newport in Newport, Rhode Island. NREL's Renewable Energy Optimization (REO) tool was utilized to identify RE technologies that present the best opportunity for life-cycle cost-effective implementation while also serving to reduce energy-related carbon dioxide emissions and increase the percentage of RE used atmore » NAVSTA Newport. The technologies included in REO are daylighting, wind, solar ventilation preheating (SVP), solar water heating, photovoltaics (PV), solar thermal (heating and electric), and biomass (gasification and cogeneration). The optimal mix of RE technologies depends on several factors including RE resources; technology cost and performance; state, utility, and federal incentives; and economic parameters (discount and inflation rates). Each of these factors was considered in this analysis. Technologies not included in REO that were investigated separately per NAVSTA Newport request include biofuels from algae, tidal power, and ground source heat pumps (GSHP).« less

Independent Review of Elemental Phosphorus Remediation at the Eastern Michaud Flats FMC Operable Unit near Pocatello, Idaho

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martino, L. E.; Jerden, J. J.; Kimmell, T. A.

2016-01-01

If, despite risks to workers and these potential impacts, stakeholders decide that P4 wastes need to be excavated and treated, the Review Team determined that a number of the ETTs examined warrant further consideration for the treatment of P4 waste that has been characterized (for example, P4 waste present in the historical ponds). Nevertheless, concerns about the health and safety of site investigation workers using then-available investigation approaches prevented the collection of subsurface samples containing P4 from large areas of the site (e.g., the railroad swale, the vadose zone beneath the Furnace Building, and the abandoned railcars), As a result,more » the contaminant CSM in those particular areas was not refined enough to allow the Review Team to draw conclusions about using some of the ETTs to treat P4 waste in those areas. The readiness of an ETT for implementation varies depending on many factors, including stakeholder input, permitting, and remedial action construction requirements. Technologies that could be ready for use in the near term (within 1 year) include the following: mechanical excavation, containment technologies, off-site incineration, and drying and mechanical mixing under a tent structure. Technologies that could be ready for use in the mid-term (1 to 2 years) include cutter suction dredging, thermal-hydraulic dredging, and underground pipeline cleaning technologies. Technologies requiring a longer lead time (2 to 5 years) include on-site incineration, a land disposal restriction waste treatment system, an Albright & Wilson batch mud still, post-treatment on-site disposal, and post-treatment off-site disposal.« less

Space Applications of Automation, Robotics and Machine Intelligence Systems (ARAMIS), phase 2. Volume 2: Telepresence project applications

NASA Technical Reports Server (NTRS)

Akin, D. L.; Minsky, M. L.; Thiel, E. D.; Kurtzman, C. R.

1983-01-01

The field of telepresence is defined and overviews of those capabilities that are now available, and those that will be required to support a NASA telepresence effort are provided. Investigation of NASA' plans and goals with regard to telepresence, extensive literature search for materials relating to relevant technologies, a description of these technologies and their state of the art, and projections for advances in these technologies over the next decade are included.

Application of methane fermentation technology into organic wastes in closed agricultural system

NASA Astrophysics Data System (ADS)

Endo, Ryosuke; Kitaya, Yoshiaki

Sustainable and recycling-based systems are required in space agriculture which takes place in an enclosed environment. Methane fermentation is one of the most major biomass conversion technologies, because (1) it provides a renewable energy source as biogas including methane, suitable for energy production, (2) the nutrient-rich solids left after digestion can be used as compost for agriculture. In this study, the effect of the application of methane fermentation technology into space agriculture on the material and energy cycle was investigated.

Fuel system technology overview

NASA Technical Reports Server (NTRS)

Friedman, R.

1980-01-01

Fuel system research and technology studies are being conducted to investigate the correlations and interactions of aircraft fuel system design and environment with applicable characteristics of the fuel. Topics include: (1) analysis of in-flight fuel temperatures; (2) fuel systems for high freezing point fuels; (3) experimental study of low temperature pumpability; (4) full scale fuel tank simulation; and (5) rapid freezing point measurement.

A Comparative Study of University of Wisconsin-Stout Freshmen and Senior Education Major's Computing and Internet Technology Skills/Knowledge and Associated Learning Experiences

ERIC Educational Resources Information Center

Sveum, Evan Charles

2010-01-01

A study comparing University of Wisconsin-Stout freshmen and senior education majors' computing and Internet technology skills/knowledge and associated learning experiences was conducted. Instruments used in this study included the IC[superscript 3][R] Exam by Certiport, Inc. and the investigator's Computing and Internet Skills Learning…

Applications of microarray technology in breast cancer research

PubMed Central

Cooper, Colin S

2001-01-01

Microarrays provide a versatile platform for utilizing information from the Human Genome Project to benefit human health. This article reviews the ways in which microarray technology may be used in breast cancer research. Its diverse applications include monitoring chromosome gains and losses, tumour classification, drug discovery and development, DNA resequencing, mutation detection and investigating the mechanism of tumour development. PMID:11305951

Systematic Review of Studies Promoting the Use of Assistive Technology Devices by Young Children with Disabilities. Practical Evaluation Reports, Volume 5, Number 1

ERIC Educational Resources Information Center

Dunst, Carl J.; Trivette, Carol M.; Hamby, Deborah W.; Simkus, Andrew

2013-01-01

Findings from a meta-analysis of studies investigating the use of five different assistive technology devices (switch interfaces, powered mobility, computers, augmentative communication, weighted/pressure vests) with young children with disabilities are reported. One hundred and nine studies including 1,342 infants, toddlers, and preschoolers were…

Teachers' Changing Roles in Computer Assisted Roles in Kenyan Secondary Schools

ERIC Educational Resources Information Center

Tanui, Edward K.; Kiboss, Joel K.; Walaba, Aggrey A.; Nassiuma, Dankit

2008-01-01

The use of computer technology in Kenyan schools is a relatively new approach that is currently being included in the school curriculum. The introduction of computer technology for use in teaching does not always seem to be accepted outright by most teachers. The purpose of the study reported in this paper was to investigate the teachers' changing…

Performance of Fourth-Grade Students with Learning Disabilities on Multiplication Facts Comparing Teacher-Mediated and Technology-Mediated Interventions: A Preliminary Investigation

ERIC Educational Resources Information Center

Bryant, Brian R.; Ok, Minwook; Kang, Eun Young; Kim, Min Kyung; Lang, Russell; Bryant, Diane Pedrotty; Pfannestiel, Kathleen

2015-01-01

Instructional applications (apps) are educational software programs that can be accessed via mobile technologies (e.g., iPad, smartphone) and used to help students acquire various academic skills, including mathematics. Although research suggests that app-based instruction (AI) can be effective, there is a paucity of research comparing AI, to…

The Implementation of Integrated Science Technology, Engineering and Mathematics (STEM) Instruction Using Robotics in the Middle School Science Classroom

ERIC Educational Resources Information Center

Ntemngwa, Celestin; Oliver, J. Steve

2018-01-01

The research study reported here was conducted to investigate the implementation of integrated STEM lessons within courses that have a single subject science focus. The purpose also included development of a pedagogical theory. This technology-based teaching was conceptualized by school administrators and teachers in order to provide middle school…

An investigation into closed-loop treatment of neurological disorders based on sensing mitochondrial dysfunction.

PubMed

Adams, Scott D; Kouzani, Abbas Z; Tye, Susannah J; Bennet, Kevin E; Berk, Michael

2018-02-13

Dynamic feedback based closed-loop medical devices offer a number of advantages for treatment of heterogeneous neurological conditions. Closed-loop devices integrate a level of neurobiological feedback, which allows for real-time adjustments to be made with the overarching aim of improving treatment efficacy and minimizing risks for adverse events. One target which has not been extensively explored as a potential feedback component in closed-loop therapies is mitochondrial function. Several neurodegenerative and psychiatric disorders including Parkinson's disease, Major Depressive disorder and Bipolar disorder have been linked to perturbations in the mitochondrial respiratory chain. This paper investigates the potential to monitor this mitochondrial function as a method of feedback for closed-loop neuromodulation treatments. A generic model of the closed-loop treatment is developed to describe the high-level functions of any system designed to control neural function based on mitochondrial response to stimulation, simplifying comparison and future meta-analysis. This model has four key functional components including: a sensor, signal manipulator, controller and effector. Each of these components are described and several potential technologies for each are investigated. While some of these candidate technologies are quite mature, there are still technological gaps remaining. The field of closed-loop medical devices is rapidly evolving, and whilst there is a lot of interest in this area, widespread adoption has not yet been achieved due to several remaining technological hurdles. However, the significant therapeutic benefits offered by this technology mean that this will be an active area for research for years to come.

Art-Science-Technology collaboration through immersive, interactive 3D visualization

NASA Astrophysics Data System (ADS)

Kellogg, L. H.

2014-12-01

At the W. M. Keck Center for Active Visualization in Earth Sciences (KeckCAVES), a group of geoscientists and computer scientists collaborate to develop and use of interactive, immersive, 3D visualization technology to view, manipulate, and interpret data for scientific research. The visual impact of immersion in a CAVE environment can be extremely compelling, and from the outset KeckCAVES scientists have collaborated with artists to bring this technology to creative works, including theater and dance performance, installations, and gamification. The first full-fledged collaboration designed and produced a performance called "Collapse: Suddenly falling down", choreographed by Della Davidson, which investigated the human and cultural response to natural and man-made disasters. Scientific data (lidar scans of disaster sites, such as landslides and mine collapses) were fully integrated into the performance by the Sideshow Physical Theatre. This presentation will discuss both the technological and creative characteristics of, and lessons learned from the collaboration. Many parallels between the artistic and scientific process emerged. We observed that both artists and scientists set out to investigate a topic, solve a problem, or answer a question. Refining that question or problem is an essential part of both the creative and scientific workflow. Both artists and scientists seek understanding (in this case understanding of natural disasters). Differences also emerged; the group noted that the scientists sought clarity (including but not limited to quantitative measurements) as a means to understanding, while the artists embraced ambiguity, also as a means to understanding. Subsequent art-science-technology collaborations have responded to evolving technology for visualization and include gamification as a means to explore data, and use of augmented reality for informal learning in museum settings.

76 FR 14696 - Ananke, Inc., Providence, RI; Notice of Negative Determination on Reconsideration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... * * * Cognizant Technology Solutions (an offshoring/outsourcing company)'' and included support documentation. Information obtained during the reconsideration investigation confirmed that, during the relevant period...

Microgravity science and applications. Program tasks and bibliography for FY 1994

NASA Technical Reports Server (NTRS)

1995-01-01

This annual report includes research projects funded by the Office of Life and Microgravity Sciences and Applications, Microgravity Science and Applications Division, during FY 1994. It is a compilation of program tasks (objective, description, significance, progress, students funded under research, and bibliographic citations) for flight research and ground-based research in five major scientific disciplines: benchmark science, biotechnology, combustion science, fluid physics, and materials science. ATD (Advanced Technology Development) program task descriptions are also included. The bibliography cites the related PI (Principal Investigator) publications and presentations for these program tasks in FY 1994. Three appendices include Table of Acronyms, Guest Investigator Index, and Principal Investigator Index.

Microgravity science & applications. Program tasks and bibliography for FY 1995

NASA Technical Reports Server (NTRS)

1996-01-01

This annual report includes research projects funded by the Office of Life and Microgravity Sciences and Applications, Microgravity Science and Applications Division, during FY 1994. It is a compilation of program tasks (objective, description, significance, progress, students funded under research, and bibliographic citations) for flight research and ground based research in five major scientific disciplines: benchmark science, biotechnology, combustion science, fluid physics, and materials science. Advanced technology development (ATD) program task descriptions are also included. The bibliography cites the related principle investigator (PI) publications and presentations for these program tasks in FY 1994. Three appendices include a Table of Acronyms, a Guest Investigator index and a Principle Investigator index.

Bioenergy Technologies Office FY 2017 Budget At-A-Glance

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2016-03-01

The Bioenergy Technologies Office (BETO) is accelerating the commercialization of first-of-a-kind technologies that use our nation’s abundant renewable biomass resources for the production of advanced biofuels and biobased products. Non-food sources of biomass, such as algae, agricultural residues and forestry trimmings, and energy crops like switchgrass, are being used in BETO-supported, cutting-edge technologies to produce drop-in biofuels, including renewable gasoline, diesel, and jet fuels. BETO is also investigating how to improve the economics of biofuel production by converting biomass into higher-value chemicals and products that historically have always been derived from petroleum.

Nonvolatile Memory Technology for Space Applications

NASA Technical Reports Server (NTRS)

Oldham, Timothy R.; Irom, Farokh; Friendlich, Mark; Nguyen, Duc; Kim, Hak; Berg, Melanie; LaBel, Kenneth A.

2010-01-01

This slide presentation reviews several forms of nonvolatile memory for use in space applications. The intent is to: (1) Determine inherent radiation tolerance and sensitivities, (2) Identify challenges for future radiation hardening efforts, (3) Investigate new failure modes and effects, and technology modeling programs. Testing includes total dose, single event (proton, laser, heavy ion), and proton damage (where appropriate). Test vehicles are expected to be a variety of non-volatile memory devices as available including Flash (NAND and NOR), Charge Trap, Nanocrystal Flash, Magnetic Memory (MRAM), Phase Change--Chalcogenide, (CRAM), Ferroelectric (FRAM), CNT, and Resistive RAM.

The emergence of diagnostic imaging technologies in breast cancer: discovery, regulatory approval, reimbursement, and adoption in clinical guidelines

PubMed Central

Klein, Gregory; Carr, Lauren; Kessler, Larry; Sullivan, Sean D.

2012-01-01

Abstract In this article, we trace the chronology of developments in breast imaging technologies that are used for diagnosis and staging of breast cancer, including mammography, ultrasonography, magnetic resonance imaging, computed tomography, and positron emission tomography. We explore factors that affected clinical acceptance and utilization of these technologies from discovery to clinical use, including milestones in peer-reviewed publication, US Food and Drug Administration approval, reimbursement by payers, and adoption into clinical guidelines. The factors driving utilization of new imaging technologies are mainly driven by regulatory approval and reimbursement by payers rather than evidence that they provide benefits to patients. Comparative effectiveness research can serve as a useful tool to investigate whether these imaging modalities provide information that improves patient outcomes in real-world settings. PMID:22275726

High Thrust-to-Power Annular Engine Technology

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Thomas, Robert E.; Crofton, Mark W.; Young, Jason A.; Foster, John E.

2015-01-01

Gridded ion engines have the highest efficiency and total impulse of any mature electric propulsion technology, and have been successfully implemented for primary propulsion in both geocentric and heliocentric environments with excellent ground/in-space correlation of performance. However, they have not been optimized to maximize thrust-to-power, an important parameter for Earth orbit transfer applications. This publication discusses technology development work intended to maximize this parameter. These activities include investigating the capabilities of a non-conventional design approach, the annular engine, which has the potential of exceeding the thrust-to-power of other EP technologies. This publication discusses the status of this work, including the fabrication and initial tests of a large-area annular engine. This work is being conducted in collaboration among NASA Glenn Research Center, The Aerospace Corporation, and the University of Michigan.

High Thrust-to-Power Annular Engine Technology

NASA Technical Reports Server (NTRS)

Patterson, Michael; Thomas, Robert; Crofton, Mark; Young, Jason A.; Foster, John E.

2015-01-01

Gridded ion engines have the highest efficiency and total impulse of any mature electric propulsion technology, and have been successfully implemented for primary propulsion in both geocentric and heliocentric environments with excellent ground-in-space correlation of performance. However, they have not been optimized to maximize thrust-to-power, an important parameter for Earth orbit transfer applications. This publication discusses technology development work intended to maximize this parameter. These activities include investigating the capabilities of a non-conventional design approach, the annular engine, which has the potential of exceeding the thrust-to-power of other EP technologies. This publication discusses the status of this work, including the fabrication and initial tests of a large-area annular engine. This work is being conducted in collaboration among NASA Glenn Research Center, The Aerospace Corporation, and the University of Michigan.

A Systematic and Integrated Review of Mobile-Based Technology to Promote Active Lifestyles in People With Type 2 Diabetes.

PubMed

McMillan, Kathryn Anne; Kirk, Alison; Hewitt, Allan; MacRury, Sandra

2017-03-01

The aim was to review studies examining the effectiveness, acceptability, and feasibility of mobile-based technology for promoting active lifestyles in people with type 2 diabetes (T2D). Benefits of leading an active lifestyle following a diagnosis of T2D, including improved glycemic control, have been reported. Studies examining the specific use of mobile-based technologies to promote an active lifestyle in T2D have not previously been reviewed. Research studies examining effectiveness, feasibility or acceptability of mobile-based technology for active lifestyle promotion for T2D management were included (n = 9). The databases searched included PubMed, Medline, ScienceDirect, and ACM Digital Library (January 2005 to October 2015). Studies were categorized as (1) informing, (2) monitoring, (3) provoking, or (4) sustaining behavior change. Technologies used included smartphone or tablet apps, diabetes personal digital assistant, continuous glucose monitor and accelerometer, pedometer, and a website delivered by a smartphone. No articles examined the effectiveness of mobile-based technology in monitoring health behaviors and behavior change. Four of the studies found mobile-based technology to be motivational and supportive for behavior change. The visual reinforcement was identified as motivational. The feasibility and acceptability of using mobile-based technology to provide sustained lifestyle change and the effectiveness of mobile-based technology in monitoring health behaviors and behavior change have not been investigated. No studies examined all 3 of the outcomes or focused decreasing the participants' sedentary behavior. Limited research has examined the feasibility, acceptability, and effectiveness of mobile-based technology to promote active lifestyles and subsequently good diabetes management in people with T2D.

Advancements in CAD/CAM technology: Options for practical implementation.

PubMed

Alghazzawi, Tariq F

2016-04-01

The purpose of this review is to present a comprehensive review of the current published literature investigating the various methods and techniques for scanning, designing, and fabrication of CAD/CAM generated restorations along with detailing the new classifications of CAD/CAM technology. I performed a review of a PubMed using the following search terms "CAD/CAM, 3D printing, scanner, digital impression, and zirconia". The articles were screened for further relevant investigations. The search was limited to articles written in English, published from 2001 to 2015. In addition, a manual search was also conducted through articles and reference lists retrieved from the electronic search and peer-reviewed journals. CAD/CAM technology has advantages including digital impressions and models, and use of virtual articulators. However, the implementation of this technology is still considered expensive and requires highly trained personnel. Currently, the design software has more applications including complete dentures and removable partial denture frameworks. The accuracy of restoration fabrication can be best attained with 5 axes milling units. The 3D printing technology has been incorporated into dentistry, but does not include ceramics and is limited to polymers. In the future, optical impressions will be replaced with ultrasound impressions using ultrasonic waves, which have the capability to penetrate the gingiva non-invasively without retraction cords and not be affected by fluids. The coming trend for most practitioners will be the use of an acquisition camera attached to a computer with the appropriate software and the capability of forwarding the image to the laboratory. Copyright © 2016 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

Overview of environmental investigations and remediations of leaks and spills in oil and gas fields

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, J.A.; Jacobs, O.T.; Traver, R.

Historic and current leaks and spills in oil and gas fields can involve a variety of hazardous compounds, can be located virtually anywhere on site, and may significantly degrade soils and groundwater quality. Environmental evaluation of historic and current leaks and spills in oil and gas fields occurs in the investigative stage, characterized by a site assessment and field evaluation. The site assessment includes a site survey, aerial photo interpretation, review of regulatory agency records, operators' records, previous work by consultants, and interviews with knowledgeable persons. The field evaluation, designed to examine the lateral and vertical extent of the spillmore » or leak, could include a soil gas survey, cone penetrometer, trenching, and drilling. Using these techniques, collected soil or groundwater samples can be analyzed in a laboratory to differentiate the various hazardous compounds on-site. Once an environmental investigation has been performed to define the vertical and lateral extent of a spill and the potential pathways that the hazardous compound will move to expose a given population, then remediation options can be designed. Remedial programs for hazardous compounds commonly found in oil and gas fields include the following in-situ technologies: volatilization, biodegradation, leaching and chemical reaction, vitrification, passive remediation, and isolation/containment. Non-in-situ technologies include land farming, incineration, asphalt incorporation, solidification/stabilization, groundwater extraction and treatment, chemical extraction, and excavation and offsite disposal. Factors affecting remedial measures are cost of technology, time available to finish remediation, technical feasibility, regulatory acceptance, and accessibility and availability of space in the remediation area.« less

Photodetector based on carbon nanotubes

NASA Astrophysics Data System (ADS)

Pavlov, A.; Kitsyuk, E.; Ryazanov, R.; Timoshenkov, V.; Adamov, Y.

2015-09-01

Photodetector based on carbon nanotubes (CNT) was investigated. Sensors were done on quartz and silicon susbtrate. Samples of photodetectors sensors were produced by planar technology. This technology included deposition of first metal layer (Al), lithography for pads formation, etching, and formation of local catalyst area by inverse lithography. Vertically-aligned multi-wall carbon nanotubes were directly synthesized on substrate by PECVD method. I-V analysis and spectrum sensitivity of photodetector were investigated for 0.4 μm - 1.2 μm wavelength. Resistivity of CNT layers over temperature was detected in the range of -20°C to 100°C.

Innovative technologies and social inequalities in health: A scoping review of the literature

PubMed Central

Jensen, Magnus Rom; Solhaug, Solvor; Krokstad, Steinar

2018-01-01

The aim of this study was to systematically review the range, nature, and extent of current research activity exploring the influence of innovative health-related technologies on social inequalities in health, with specific focus on a deeper understanding of the variables used to measure this connection and the pathways leading to the (re)production of inequalities. A review process was conducted, based on scoping review techniques, searching literature published from January 1, 1996 to November 25, 2016 using MEDLINE, Scopus, and ISI web of science. Search, sorting, and data extraction processes were conducted by a team of researchers and experts using a dynamic, reflexive examination process. Of 4139 studies collected from the search process, a total of 33 were included in the final analysis. Results of this study include the classification of technologies based on how these technologies are accessed and used by end users. In addition to the factors and mechanisms that influence unequal access to technologies, the results of this study highlight the importance of variations in use that importantly shape social inequalities in health. Additionally, focus on health care services technologies must be accompanied by investigating emerging technologies influencing healthy lifestyle, genomics, and personalized devices in health. Findings also suggest that choosing one measure of social position over another has important implications for the interpretation of research results. Furthermore, understanding the pathways through which various innovative health technologies reduce or (re)produce social inequalities in health is context dependent. In order to better understand social inequalities in health, these contextual variations draw attention to the need for critical distinctions between technologies based on how these various technologies are accessed and used. The results of this study provide a comprehensive starting point for future research to further investigate how innovative technologies may influence the unequal distribution of health as a human right. PMID:29614114

Innovative technologies and social inequalities in health: A scoping review of the literature.

PubMed

Weiss, Daniel; Rydland, Håvard T; Øversveen, Emil; Jensen, Magnus Rom; Solhaug, Solvor; Krokstad, Steinar

2018-01-01

The aim of this study was to systematically review the range, nature, and extent of current research activity exploring the influence of innovative health-related technologies on social inequalities in health, with specific focus on a deeper understanding of the variables used to measure this connection and the pathways leading to the (re)production of inequalities. A review process was conducted, based on scoping review techniques, searching literature published from January 1, 1996 to November 25, 2016 using MEDLINE, Scopus, and ISI web of science. Search, sorting, and data extraction processes were conducted by a team of researchers and experts using a dynamic, reflexive examination process. Of 4139 studies collected from the search process, a total of 33 were included in the final analysis. Results of this study include the classification of technologies based on how these technologies are accessed and used by end users. In addition to the factors and mechanisms that influence unequal access to technologies, the results of this study highlight the importance of variations in use that importantly shape social inequalities in health. Additionally, focus on health care services technologies must be accompanied by investigating emerging technologies influencing healthy lifestyle, genomics, and personalized devices in health. Findings also suggest that choosing one measure of social position over another has important implications for the interpretation of research results. Furthermore, understanding the pathways through which various innovative health technologies reduce or (re)produce social inequalities in health is context dependent. In order to better understand social inequalities in health, these contextual variations draw attention to the need for critical distinctions between technologies based on how these various technologies are accessed and used. The results of this study provide a comprehensive starting point for future research to further investigate how innovative technologies may influence the unequal distribution of health as a human right.

Ignition potential of muzzle-loading firearms: An exploratory investigation

Treesearch

David V. Haston; Mark A. Finney; Andy Horcher; Philip A. Yates; Kahlil Detrich

2009-01-01

The National Technology and Development Program of the Forest Service, U.S. Department of Agriculture, was asked to conduct an exploratory study on the ignition potential of muzzle-loading firearms. The five independent variables investigated include projectile type, powder type, powder load, patch thickness, and patch lubricant treatment. Indoor testing was performed...

An Analysis of the Use of Graphical Representation in Participants' Solutions

ERIC Educational Resources Information Center

Bleich, Laurel; Ledford, Sarah; Orrill, Chandra Hawley; Polly, Drew

2006-01-01

InterMath participants spend time in workshops exploring technology-rich mathematical investigations and completing write-ups. These write-ups include a written explanation of their problem solving process, screen captures of files that they generated while completing the investigation and links to these files. This paper examines the use of…

DOE/JPL advanced thermionic technology program

NASA Technical Reports Server (NTRS)

1979-01-01

Progress made in different tasks of the advanced thermionic technology program is described. The tasks include surface and plasma investigations (surface characterization, spectroscopic plasma experiments, and converter theory); low temperature converter development (tungsten emitter, tungsten oxide collector and tungsten emitter, nickel collector); component hardware development (hot shell development); flame-fired silicon carbide converters; high temperature and advanced converter studies; postoperational diagnostics; and correlation of design interfaces.

Development of a Multileaf Collimator for Proton Radiotherapy

DTIC Science & Technology

2007-06-01

for proton radiotherapy, and the first year of the project to develop image guided treatment protocols for proton therapy . This research...multileaf collimator (MLC) for proton therapy and investigates the issues that must be resolved to use an MLC in proton therapy . The second technology...the contract included three development agreements directly related to the work supported by this grant to develop technology for proton therapy .

A Proposal to Develop Interactive Classification Technology

NASA Technical Reports Server (NTRS)

deBessonet, Cary

1998-01-01

Research for the first year was oriented towards: 1) the design of an interactive classification tool (ICT); and 2) the development of an appropriate theory of inference for use in ICT technology. The general objective was to develop a theory of classification that could accommodate a diverse array of objects, including events and their constituent objects. Throughout this report, the term "object" is to be interpreted in a broad sense to cover any kind of object, including living beings, non-living physical things, events, even ideas and concepts. The idea was to produce a theory that could serve as the uniting fabric of a base technology capable of being implemented in a variety of automated systems. The decision was made to employ two technologies under development by the principal investigator, namely, SMS (Symbolic Manipulation System) and SL (Symbolic Language) [see debessonet, 1991, for detailed descriptions of SMS and SL]. The plan was to enhance and modify these technologies for use in an ICT environment. As a means of giving focus and direction to the proposed research, the investigators decided to design an interactive, classificatory tool for use in building accessible knowledge bases for selected domains. Accordingly, the proposed research was divisible into tasks that included: 1) the design of technology for classifying domain objects and for building knowledge bases from the results automatically; 2) the development of a scheme of inference capable of drawing upon previously processed classificatory schemes and knowledge bases; and 3) the design of a query/ search module for accessing the knowledge bases built by the inclusive system. The interactive tool for classifying domain objects was to be designed initially for textual corpora with a view to having the technology eventually be used in robots to build sentential knowledge bases that would be supported by inference engines specially designed for the natural or man-made environments in which the robots would be called upon to operate.

The Behavioral Intervention Technology Model: An Integrated Conceptual and Technological Framework for eHealth and mHealth Interventions

PubMed Central

Schueller, Stephen M; Montague, Enid; Burns, Michelle Nicole; Rashidi, Parisa

2014-01-01

A growing number of investigators have commented on the lack of models to inform the design of behavioral intervention technologies (BITs). BITs, which include a subset of mHealth and eHealth interventions, employ a broad range of technologies, such as mobile phones, the Web, and sensors, to support users in changing behaviors and cognitions related to health, mental health, and wellness. We propose a model that conceptually defines BITs, from the clinical aim to the technological delivery framework. The BIT model defines both the conceptual and technological architecture of a BIT. Conceptually, a BIT model should answer the questions why, what, how (conceptual and technical), and when. While BITs generally have a larger treatment goal, such goals generally consist of smaller intervention aims (the "why") such as promotion or reduction of specific behaviors, and behavior change strategies (the conceptual "how"), such as education, goal setting, and monitoring. Behavior change strategies are instantiated with specific intervention components or “elements” (the "what"). The characteristics of intervention elements may be further defined or modified (the technical "how") to meet the needs, capabilities, and preferences of a user. Finally, many BITs require specification of a workflow that defines when an intervention component will be delivered. The BIT model includes a technological framework (BIT-Tech) that can integrate and implement the intervention elements, characteristics, and workflow to deliver the entire BIT to users over time. This implementation may be either predefined or include adaptive systems that can tailor the intervention based on data from the user and the user’s environment. The BIT model provides a step towards formalizing the translation of developer aims into intervention components, larger treatments, and methods of delivery in a manner that supports research and communication between investigators on how to design, develop, and deploy BITs. PMID:24905070

The behavioral intervention technology model: an integrated conceptual and technological framework for eHealth and mHealth interventions.

PubMed

Mohr, David C; Schueller, Stephen M; Montague, Enid; Burns, Michelle Nicole; Rashidi, Parisa

2014-06-05

A growing number of investigators have commented on the lack of models to inform the design of behavioral intervention technologies (BITs). BITs, which include a subset of mHealth and eHealth interventions, employ a broad range of technologies, such as mobile phones, the Web, and sensors, to support users in changing behaviors and cognitions related to health, mental health, and wellness. We propose a model that conceptually defines BITs, from the clinical aim to the technological delivery framework. The BIT model defines both the conceptual and technological architecture of a BIT. Conceptually, a BIT model should answer the questions why, what, how (conceptual and technical), and when. While BITs generally have a larger treatment goal, such goals generally consist of smaller intervention aims (the "why") such as promotion or reduction of specific behaviors, and behavior change strategies (the conceptual "how"), such as education, goal setting, and monitoring. Behavior change strategies are instantiated with specific intervention components or "elements" (the "what"). The characteristics of intervention elements may be further defined or modified (the technical "how") to meet the needs, capabilities, and preferences of a user. Finally, many BITs require specification of a workflow that defines when an intervention component will be delivered. The BIT model includes a technological framework (BIT-Tech) that can integrate and implement the intervention elements, characteristics, and workflow to deliver the entire BIT to users over time. This implementation may be either predefined or include adaptive systems that can tailor the intervention based on data from the user and the user's environment. The BIT model provides a step towards formalizing the translation of developer aims into intervention components, larger treatments, and methods of delivery in a manner that supports research and communication between investigators on how to design, develop, and deploy BITs.

FBI's DNA analysis program

NASA Astrophysics Data System (ADS)

Brown, John R.

1994-03-01

Forensic DNA profiling technology is a significant law enforcement tool due to its superior discriminating power. Applying the principles of population genetics to the DNA profile obtained in violent crime investigations results in low frequency of occurrence estimates for the DNA profile. These estimates often range from a frequency of occurrence of 1 in 50 unrelated individuals to 1 in a million unrelated individuals or even smaller. It is this power to discriminate among individuals in the population that has propelled forensic DNA technology to the forefront of forensic testing in violent crime cases. Not only is the technology extremely powerful in including or excluding a criminal suspect as the perpetrator, but it also gives rise to the potential of identifying criminal suspects in cases where the investigators of unknown suspect cases have exhausted all other available leads.

Early Market TRL/MRL Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa; Stetson, Ned

he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less

Technological innovations and the rise of social inequalities in health.

PubMed

Weiss, Daniel; Eikemo, Terje Andreas

2017-11-01

Social inequalities in health have been categorised as a human-rights issue that requires action. Unfortunately, these inequalities are on the rise in many countries, including welfare states. Various theories have been offered to explain the persistence (and rise) of these inequalities over time, including the social determinants of health and fundamental cause theory. Interestingly, the rise of modern social inequalities in health has come at a time of great technological innovation. This article addresses whether these technological innovations are significantly influencing the persistence of modern social inequalities in health. A theoretical argument is offered for this potential connection and is discussed alongside the typical social determinants of health perspective and the increasingly popular fundamental cause perspective. This is followed by a proposed research agenda for further investigation of the potential role that technological innovations may play in influencing social inequalities in health.

Technology pedagogy: Six teacher candidates' developing pedagogical models for the use of computers in science instruction

NASA Astrophysics Data System (ADS)

Myhre, Oddmund Reidar

1997-12-01

This study investigated how teacher candidates' developing pedagogical beliefs and knowledge of technology influenced their perception of such tools in the teaching of subject matter as they complete the initial course work of their professional program. The purpose of the study was to conceptualize more clearly the relationship between prospective teachers' thinking about computer technology and the content of their professional education. A case study methodology was used to investigate changes in six pre-service secondary science teachers' thinking about technology as a pedagogical tool. Two of the teachers had extensive experience with technology upon entering the teacher preparation course-work, whereas the other four were novice computer users. Data included three semi structured interviews and non-participant observations during the technology course-work. Additional data were collected in the form of interviews with university faculty and cooperating teachers. Analysis of these data indicated that prospective candidates entered teacher education viewing technology as a tool that supports a teacher centered classroom. As the candidates explored more student centered approaches to teaching, they found less room for technology in their images of their future practice. The data also indicated that the technology course-work was isolated from the rest of the teacher education program and many of the misconceptions about technology that the candidates brought to their professional preparation were left unchallenged.

Effective use of forensic science in volume crime investigations: identifying recurring themes in the literature.

PubMed

Ludwig, Anika; Fraser, Jim

2014-01-01

New scientific, technological and legal developments, particularly the introduction of national databases for DNA and fingerprints, have led to increased use of forensic science in the investigation of crime. There is an assumption, and in some instances specific assertions, that such developments bring improvements either in broad criminal justice terms or more narrowly in terms of economic or practical efficiencies. The underlying presumption is that the new technological opportunities will be understood and effectively implemented. This research investigates whether such increases in activity have also been accompanied by improvements in the effective use of forensic science. A systematic review of thirty-six reports published (predominantly in England and Wales) since the 1980s, which have considered the use of forensic science in the investigation of volume crimes, was carried out. These reports have identified a number of recurrent themes that influenced how effectively forensic science was used in investigations. The themes identified included forensic knowledge and training of investigators, communication and information exchange between specialists and investigators, timeliness of forensic results, interagency relationships and deployment of crime scene examiner resources. The research findings suggest that these factors continue to hinder the effective use of forensic science despite technological advances and this paper considers their potential causes. © 2013.

High Reynolds number tests of a NASA SC(3)-0712(B) airfoil in the Langley 0.3-meter transonic cryogenic tunnel

NASA Technical Reports Server (NTRS)

Johnson, W. G., Jr.; Hill, A. S.; Eichmann, O.

1985-01-01

A wind tunnel investigation of a NASA 12-percent-thick, advanced-technology supercritical airfoil was conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel (TCT). This investigation represents another in the series of NASA/U.S. industry two-dimensional airfoil studies to be completed in the Advanced Technology Airfoil Tests program. Test temperature was varied from 220 K to 96 K at pressures ranging from 1.2 to 4.3 atm. Mach number was varied from 0.60 to 0.80. These variables provided a Reynolds number range from 4,400,000 to 40,000,000 based on a 15.24-cm (6.0-in.) airfoil chord. This investigation was designed to test a NASA advanced-technology airfoil from low to flight-equivalent Reynolds numbers, provide experience in cryogenic wind tunnel model design and testing techniques, and demonstrate the suitability of the 0.3-m TCT as an airfoil test facility. The aerodynamic results are presented as integrated force and moment coefficients and pressure distributions. Data are included which demonstrate the effects of fixed transition, Mach number, and Reynolds number on the aerodynamic characteristics. Also included are remarks on the model design, the model structural integrity, and the overall test experience.

Pressure distribution from high Reynolds number tests of a NASA SC(3)-0712(B) airfoil in the Langley 0.3-meter transonic cryogenic tunnel

NASA Technical Reports Server (NTRS)

Johnson, W. G., Jr.; Hill, A. S.; Eichmann, O.

1985-01-01

A wind tunnel investigation of a NASA 12-percent-thick, advanced-technology supercritical airfoil was conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel (TCT). This investigation represents another in the series of NASA/U.S. industry two-dimensional airfoil studies to be completed in the Advanced Technology Airfoil Tests program. Test temperature was varied from 220 K to 96 K at pressures ranging from 1.2 to 4.3 atm. Mach number was varied from 0.50 to 0.80. This investigation was designed to: (1) test a NASA advanced-technology airfoil from low to flight equivalent Reynolds numbers, (2) provide experience in cryogenic wind-tunnel model design and testing techniques, and (3) demonstrate the suitability of the 0.3-m TCT as an airfoil test facility. All the test objectives were met. The pressure data are presented without analysis in tabulated format and as plots of pressure coefficient versus position on the airfoil. This report was prepared for use in conjunction with the aerodynamic coefficient data published in NASA-TM-86371. Data are included which demonstrate the effects of fixed transition. Also included are remarks on the model design and fabrication.

Acoustic charge transport technology investigation for advanced development transponder

NASA Technical Reports Server (NTRS)

Kayalar, S.

1993-01-01

Acoustic charge transport (ACT) technology has provided a basis for a new family of analog signal processors, including a programmable transversal filter (PTF). Through monolithic integration of ACT delay lines with GaAs metal semiconductor field effect transistor (MESFET) digital memory and controllers, these devices significantly extend the performance of PTF's. This article introduces the basic operation of these devices and summarizes their present and future specifications. The production and testing of these devices indicate that this new technology is a promising one for future space applications.

Lost and misplaced items and assistive devices in nursing homes: Identifying problems and technological opportunities through participatory design research.

PubMed

Oude Weernink, C E; Sweegers, L; Relou, L; van der Zijpp, T J; van Hoof, J

2018-02-06

Modern healthcare, including nursing home care, goes together with the use of technologies to support treatment, the provision of care and daily activities. The challenges concerning the implementation of such technologies are numerous. One of these emerging technologies are location technologies (RTLS or Real-Time Location Systems). that can be utilized in the nursing home for monitoring the use and location of assets. This paper describes a participatory design study of RTLS based on context mapping, conducted in two nursing home organizations. Rather than investigating the technological possibilities, this study investigates the needs and wishes from the perspective of the care professional. The study identified semantic themes that relate to the practicalities of lost and misplaced items in the nursing home, as well as latent themes that cover the wishes regarding technology in the nursing homes. The organizational culture and building typology may play a role in losing items. The participants in this study indicated that RTLS can provide a solution to some of the challenges that they encounter in the workplace. However, the implementation of new technologies should be done with care and should be integrated into existing ICT systems in order to minimize additional training and posing a burden on the workload.

Lost and misplaced items and assistive devices in nursing homes: Identifying problems and technological opportunities through participatory design research

PubMed Central

Oude Weernink, C.E.; Sweegers, L.; Relou, L.; van der Zijpp, T.J.; van Hoof, J.

2018-01-01

INTRODUCTION: Modern healthcare, including nursing home care, goes together with the use of technologies to support treatment, the provision of care and daily activities. The challenges concerning the implementation of such technologies are numerous. One of these emerging technologies are location technologies (RTLS or Real-Time Location Systems). that can be utilized in the nursing home for monitoring the use and location of assets. METHODOLOGY: This paper describes a participatory design study of RTLS based on context mapping, conducted in two nursing home organizations. Rather than investigating the technological possibilities, this study investigates the needs and wishes from the perspective of the care professional. RESULTS: The study identified semantic themes that relate to the practicalities of lost and misplaced items in the nursing home, as well as latent themes that cover the wishes regarding technology in the nursing homes. The organizational culture and building typology may play a role in losing items. CONCLUSION: The participants in this study indicated that RTLS can provide a solution to some of the challenges that they encounter in the workplace. However, the implementation of new technologies should be done with care and should be integrated into existing ICT systems in order to minimize additional training and posing a burden on the workload. PMID:29527110

Measures to restore metallurgical mine wasteland using ecological restoration technologies: A case study at Longnan Rare Earth Mine

NASA Astrophysics Data System (ADS)

Rao, Yunzhang; Gu, Ruizhi; Guo, Ruikai; Zhang, Xueyan

2017-01-01

Whereas mining activities produce the raw materials that are crucial to economic growth, such activities leave extensive scarring on the land, contributing to the waste of valuable land resources and upsetting the ecological environment. The aim of this study is therefore to investigate various ecological technologies to restore metallurgical mine wastelands. These technologies include measures such as soil amelioration, vegetation restoration, different vegetation planting patterns, and engineering technologies. The Longnan Rare Earth Mine in the Jiangxi Province of China is used as the case study. The ecological restoration process provides a favourable reference for the restoration of a metallurgical mine wasteland.

How different types of users develop trust in technology: A qualitative analysis of the antecedents of active and passive user trust in a shared technology

PubMed Central

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-01-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. PMID:24882059

How different types of users develop trust in technology: a qualitative analysis of the antecedents of active and passive user trust in a shared technology.

PubMed

Xu, Jie; Le, Kim; Deitermann, Annika; Montague, Enid

2014-11-01

The aim of this study was to investigate the antecedents of trust in technology for active users and passive users working with a shared technology. According to the prominence-interpretation theory, to assess the trustworthiness of a technology, a person must first perceive and evaluate elements of the system that includes the technology. An experimental study was conducted with 54 participants who worked in two-person teams in a multi-task environment with a shared technology. Trust in technology was measured using a trust in technology questionnaire and antecedents of trust were elicited using an open-ended question. A list of antecedents of trust in technology was derived using qualitative analysis techniques. The following categories emerged from the antecedent: technology factors, user factors, and task factors. Similarities and differences between active users and passive user responses, in terms of trust in technology were discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Heavy-section steel technology program. Semiannual progress report for period ending February 28, 1973

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1974-02-01

The materials investigations under the HSST program are divided into studies of unirradiated materials and studies of irradiation effects. The studies of unirradiated materials, which include inspection, characterization, metallurgy, variability determinations, transition temperature investigations, fracture mechanics studies, and fatigue-crack propagation tests, are discussed. The investigations of irradiated materials include studies of radiation effects on A-533-B steel. Results of studies on thick pressure vessels and pipes of ASTM A508 steel are also reported along with results of studies on Mode III crack extension in reactor piping. (JRD)

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification.

PubMed

Presnyakova, Darya; Archer, Will; Braun, David R; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via "core and flake" technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables--and their interactions--including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage.

Documenting Differences between Early Stone Age Flake Production Systems: An Experimental Model and Archaeological Verification

PubMed Central

Presnyakova, Darya; Archer, Will; Braun, David R.; Flear, Wesley

2015-01-01

This study investigates morphological differences between flakes produced via “core and flake” technologies and those resulting from bifacial shaping strategies. We investigate systematic variation between two technological groups of flakes using experimentally produced assemblages, and then apply the experimental model to the Cutting 10 Mid -Pleistocene archaeological collection from Elandsfontein, South Africa. We argue that a specific set of independent variables—and their interactions—including external platform angle, platform depth, measures of thickness variance and flake curvature should distinguish between these two technological groups. The role of these variables in technological group separation was further investigated using the Generalized Linear Model as well as Linear Discriminant Analysis. The Discriminant model was used to classify archaeological flakes from the Cutting 10 locality in terms of their probability of association, within either experimentally developed technological group. The results indicate that the selected independent variables play a central role in separating core and flake from bifacial technologies. Thickness evenness and curvature had the greatest effect sizes in both the Generalized Linear and Discriminant models. Interestingly the interaction between thickness evenness and platform depth was significant and played an important role in influencing technological group membership. The identified interaction emphasizes the complexity in attempting to distinguish flake production strategies based on flake morphological attributes. The results of the discriminant function analysis demonstrate that the majority of flakes at the Cutting 10 locality were not associated with the production of the numerous Large Cutting Tools found at the site, which corresponds with previous suggestions regarding technological behaviors reflected in this assemblage. PMID:26111251

Investigation of bioaerosols released from swine farms using conventional and alternative waste treatment and management technologies

USGS Publications Warehouse

Ko, G.; Simmons, O. D.; Likirdopulos, C.A.; Worley-Davis, L.; Williams, M.; Sobsey, M.D.

2008-01-01

Microbial air pollution from concentrated animal feeding operations (CAFOs) has raised concerns about potential public health and environmental impacts. We investigated the levels of bioaerosols released from two swine farms using conventional lagoon-sprayfield technology and ten farms using alternative waste treatment and management technologies in the United States. In total, 424 microbial air samples taken at the 12 CAFOs were analyzed for several indicator and pathogenic microorganisms, including culturable bacteria and fungi, fecal coliform, Escherichia coli, Clostridium perfringens, bacteriophage, and Salmonella. At all of the investigated farms, bacterial concentrations at the downwind boundary were higher than those at the upwind boundary, suggesting that the farms are sources of microbial air contamination. In addition, fecal indicator microorganisms were found more frequently near barns and treatment technology sites than upwind or downwind of the farms. Approximately 4.5% (19/424), 1.2% (5/424), 22.2% (94/424), and 12.3% (53/424) of samples were positive for fecal coliform, E. coli, Clostridium, and total coliphage, respectively. Based on statistical comparison of airborne fecal indicator concentrations at alternative treatment technology farms compared to control farms with conventional technology, three alternative waste treatment technologies appear to perform better at reducing the airborne release of fecal indicator microorganisms during on-farm treatment and management processes. These results demonstrate that airborne microbial contaminants are released from swine farms and pose possible exposure risks to farm workers and nearby neighbors. However, the release of airborne microorganisms appears to decrease significantly through the use of certain alternative waste management and treatment technologies. ?? 2008 American Chemical Society.

77 FR 11195 - Announcement of Competition Under the America COMPETES Reauthorization Act of 2011: Badges for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-24

....dmlcompetition.net/Competition/4/badges-projects.php?id=2667 . VA does not anticipate that it will issue badges... lean Six Sigma. Law Enforcement, which may include specialties such as criminal investigation and... alternative fuels. Information Technology, including all phases of software development and IT project...

Innovation in Psychology Teaching in Europe: A Scoping Survey of European Union Universities Use of Technology, Aims and Status of Teaching, Drivers of Change, and a Thematic Review of Recent Publications

ERIC Educational Resources Information Center

Reddy, Peter; Hammond, Jennifer; Lewandowska, Anna; Trapp, Annie; Marques, J. Frederico

2014-01-01

To investigate innovation in psychology teaching in European Union (EU) higher education, Europlat partners were surveyed and 43 replies were received from 30 countries. Estimated use of e-learning and other technologies including e-books and journals, virtual learning environments, lecture recording, plagiarism detection, laboratory simulation…

SERDP and ESTCP Expert Panel Workshop on Research and Development Needs for the In Situ Management of Contaminated Sediments

DTIC Science & Technology

2004-10-01

40 In Situ Treatment B15. Investigate technologies to examine the feasibility of in situ treatment, phytoremediation , and...44 C18. Develop a fundamental understanding of degradation pathways in support of biodegradation and phytoremediation technologies...www.atsdr.cdc.gov). Metals and metalloids including arsenic , cadmium, chromium, copper, and lead are natural earth elements that are released into the

Plasma Sterilization Technology for Spacecraft Applications

NASA Technical Reports Server (NTRS)

Fraser, S. J.; Olson, R. L.; Leavens, W. M.

1975-01-01

The application of plasma gas technology to sterilization and decontamination of spacecraft components is considered. Areas investigated include: effective sterilizing ranges of four separate gases; lethal constituents of a plasma environment; effectiveness of plasma against a diverse group of microorganisms; penetrating efficiency of plasmas for sterilization; and compatibility of spacecraft materials with plasma environments. Results demonstrated that plasma gas, specifically helium plasma, is a highly effective sterilant and is compatible with spacecraft materials.

Social Class and the STEM Career Pipeline an Ethnographic Investigation of Opportunity Structures in a High-Poverty versus Affluent High School

ERIC Educational Resources Information Center

Nikischer, Andrea B.

2013-01-01

This research investigates science, technology, engineering and mathematics (STEM) high school opportunity structures, including student experiences with math and science course sequences and progress, college guidance and counseling, and STEM extracurricular activities (Weis and Eisenhart, 2009), specifically related to STEM fields and career and…

Investigating the Effect of Complexity Factors in Stoichiometry Problems Using Logistic Regression and Eye Tracking

ERIC Educational Resources Information Center

Tang, Hui; Kirk, John; Pienta, Norbert J.

2014-01-01

This paper includes two experiments, one investigating complexity factors in stoichiometry word problems, and the other identifying students' problem-solving protocols by using eye-tracking technology. The word problems used in this study had five different complexity factors, which were randomly assigned by a Web-based tool that we developed. The…

Aircraft surface coatings study: Energy efficient transport program. [sprayed and adhesive bonded coatings for drag reduction

NASA Technical Reports Server (NTRS)

1979-01-01

Surface coating materials for application on transport type aircraft to reduce drag, were investigated. The investigation included two basic types of materials: spray on coatings and adhesively bonded films. A cost/benefits analysis was performed, and recommendations were made for future work toward the application of this technology.

Teaching Slope of a Line Using the Graphing Calculator as a Tool for Discovery Learning

ERIC Educational Resources Information Center

Nichols, Fiona Costello

2012-01-01

Discovery learning is one of the instructional strategies sometimes used to teach Algebra I. However, little research is available that includes investigation of the effects of incorporating the graphing calculator technology with discovery learning. This study was initiated to investigate two instructional approaches for teaching slope of a line…

Investigating Climate Change Issues With Web-Based Geospatial Inquiry Activities

NASA Astrophysics Data System (ADS)

Dempsey, C.; Bodzin, A. M.; Sahagian, D. L.; Anastasio, D. J.; Peffer, T.; Cirucci, L.

2011-12-01

In the Environmental Literacy and Inquiry middle school Climate Change curriculum we focus on essential climate literacy principles with an emphasis on weather and climate, Earth system energy balance, greenhouse gases, paleoclimatology, and how human activities influence climate change (http://www.ei.lehigh.edu/eli/cc/). It incorporates a related set of a framework and design principles to provide guidance for the development of the geospatial technology-integrated Earth and environmental science curriculum materials. Students use virtual globes, Web-based tools including an interactive carbon calculator and geologic timeline, and inquiry-based lab activities to investigate climate change topics. The curriculum includes educative curriculum materials that are designed to promote and support teachers' learning of important climate change content and issues, geospatial pedagogical content knowledge, and geographic spatial thinking. The curriculum includes baseline instructional guidance for teachers and provides implementation and adaptation guidance for teaching with diverse learners including low-level readers, English language learners and students with disabilities. In the curriculum, students use geospatial technology tools including Google Earth with embedded spatial data to investigate global temperature changes, areas affected by climate change, evidence of climate change, and the effects of sea level rise on the existing landscape. We conducted a designed-based research implementation study with urban middle school students. Findings showed that the use of the Climate Change curriculum showed significant improvement in urban middle school students' understanding of climate change concepts.

Online technology use in physiotherapy teaching and learning: a systematic review of effectiveness and users' perceptions.

PubMed

Mącznik, Aleksandra K; Ribeiro, Daniel Cury; Baxter, G David

2015-09-28

The use of online technologies in health professionals' education, including physiotherapy, has been advocated as effective and well-accepted tools for enhancing student learning. The aim of this study was to critically review the effectiveness, and user perceptions of online technology for physiotherapy teaching and learning. Following databases were systematically searched on the 31(st) of August 2013 for articles describing implementation of online technologies into physiotherapy teaching and learning: ERIC, CINAHL, Web of Science, Academic search complete, ProQuest Nursing and Allied Health Source, Medline, Embase, and Scopus. No language, design or publishing date restrictions were imposed. Risk of bias was assessed using the 2011 Mixed Methods Appraisal Tool checklist (MMAT). A total of 4133 articles were retrieved; 22 articles met the inclusion criteria and were accepted for final analysis: 15 on the effectiveness of technology, and 14 on users' perceptions. Included studies used three designs: case study (14 articles), controlled trial (3), and randomized controlled trial (5). Studies investigated both pre-registration physiotherapy students (1523) and physiotherapy professionals (171). The quality of studies ranged from 67 to 100 % on the MMAT checklist which can be considered moderate to excellent. More than half of the studies (68 %) received scores greater than 80 %. Studies typically investigated websites and discussion boards. The websites are effective in enhancing practical skills performance, and discussion boards in knowledge acquisition, as well as in development of critical and reflective thinking. Students' perceptions of the use of websites were mostly positive, providing students with entertaining, easy accessible resources. Perceived barriers to the use of websites included difficulties with internet connection, insufficiently interactive material, or personal preference for paper-based materials. Discussion boards were perceived as deepening students' thinking and facilitating reflection, allowing for learning from multiple perspectives, and providing easy communication and support. The results of this review suggest that online technologies (i.e., websites and discussion boards) have many benefits to offer for physiotherapy teaching and learning; There was minimal evidence of barriers for the use of online technologies, however, addressing the identified ones could enhance adherence to use of online technologies in health professionals' education.

Technological advances for interrogating the human kinome.

PubMed

Baharani, Akanksha; Trost, Brett; Kusalik, Anthony; Napper, Scott

2017-02-08

There is increasing appreciation among researchers and clinicians of the value of investigating biology and pathobiology at the level of cellular kinase (kinome) activity. Kinome analysis provides valuable opportunity to gain insights into complex biology (including disease pathology), identify biomarkers of critical phenotypes (including disease prognosis and evaluation of therapeutic efficacy), and identify targets for therapeutic intervention through kinase inhibitors. The growing interest in kinome analysis has fueled efforts to develop and optimize technologies that enable characterization of phosphorylation-mediated signaling events in a cost-effective, high-throughput manner. In this review, we highlight recent advances to the central technologies currently available for kinome profiling and offer our perspectives on the key challenges remaining to be addressed. © 2017 The Author(s); published by Portland Press Limited on behalf of the Biochemical Society.

Bioreactor technology for production of valuable algal products

NASA Astrophysics Data System (ADS)

Liu, Guo-Cai; Cao, Ying

1998-03-01

Bioreactor technology has long been employed for the production of various (mostly cheap) food and pharmaceutical products. More recently, research has been mainly focused on the development of novel bioreactor technology for the production of high—value products. This paper reports the employment of novel bioreactor technology for the production of high-value biomass and metabolites by microalgae. These high-value products include microalgal biomass as health foods, pigments including phycocyanin and carotenoids, and polyunsaturated fatty acids such as eicosapentaenoic acid and docosahexaenoic acid. The processes involved include heterotrophic and mixotrophic cultures using organic substrates as the carbon source. We have demonstrated that these bioreactor cultivation systems are particularly suitable for the production of high-value products from various microalgae. These cultivation systems can be further modified to improve cell densities and productivities by using high cell density techniques such as fed-batch and membrane cell recycle systems. For most of the microalgae investigated, the maximum cell concentrations obtained using these bioreactor systems in our laboratories are much higher than any so far reported in the literature.

Benefits of Application of Advanced Technologies for a Neptune Orbiter, Atmospheric Probes and Triton Lander

NASA Technical Reports Server (NTRS)

Somers, Alan; Celano, Luigi; Kauffman, Jeffrey; Rogers, Laura; Peterson, Craig

2005-01-01

Missions with planned launch dates several years from today pose significant design challenges in properly accounting for technology advances that may occur in the time leading up to actual spacecraft design, build, test and launch. Conceptual mission and spacecraft designs that rely solely on off the shelf technology will result in conservative estimates that may not be attractive or truly representative of the mission as it actually will be designed and built. This past summer, as part of one of NASA s Vision Mission Studies, a group of students at the Laboratory for Spacecraft and Mission Design (LSMD) have developed and analyzed different Neptune mission baselines, and determined the benefits of various assumed technology improvements. The baseline mission uses either a chemical propulsion system or a solar-electric system. Insertion into orbit around Neptune is achieved by means of aerocapture. Neptune s large moon Triton is used as a tour engine. With these technologies a comprehensive Cassini-class investigation of the Neptune system is possible. Technologies under investigation include the aerocapture heat shield and thermal protection system, both chemical and solar electric propulsion systems, spacecraft power, and energy storage systems.

Making use of research: clinical views on an evaluation of everyday technology use.

PubMed

Nygård, Louise; Kottorp, Anders; Rosenberg, Lena

2015-01-01

The study aim was to investigate how and when an evaluation of perceived difficulty in use of everyday technology (Everyday Technology Use Questionnaire, ETUQ) could be used in clinical occupational therapy. Eight focus-group interviews were undertaken with a total of 42 participants (occupational therapists), and data were analysed with a constant comparative approach. The findings are presented in four main categories, including (i) appropriate purposes and contexts for using ETUQ, (ii) standardization versus individual flexibility, (iii) approaching everyday technology use and occupation as one whole, and (iv) synthesizing and documentation. In conclusion, the participants considered ability to use technology to be an important topic for occupational therapy, particularly in investigations of clients with subtle disabilities and in connection with discharge from hospital - but not in inpatient care. They had different views on how to integrate ETUQ with evaluations of occupational performance, and new ideas on how information about clients' ability to use technology could be utilized in interventions. They held standardized evaluations in high regard, but a paradox appeared in that many of them would use ETUQ in a non-standardized way, while simultaneously asking for a standardized output to be used in clients' medical files and to guide interventions.

Onboard Inert Gas Generation System/Onboard Oxygen Gas Generation System (OBIGGS/OBOGS) Study. Part 2; Gas Separation Technology--State of the Art

NASA Technical Reports Server (NTRS)

Reynolds, Thomas L.; Eklund, Thor I.; Haack, Gregory A.

2001-01-01

This purpose of this contract study task was to investigate the State of the Art in Gas Separation Technologies utilized for separating air into both nitrogen and oxygen gases for potential applications on commercial aircraft. The intended applications included: nitrogen gas for fuel tank inerting, cargo compartment fire protection, and emergency oxygen for passenger and crew use in the event of loss of cabin pressure. The approach was to investigate three principle methods of gas separation: Hollow Fiber Membrane (HFM), Ceramic Membrane (CM), and liquefaction: Total Atmospheric Liquefaction of Oxygen and Nitrogen (TALON). Additional data on the performance of molecular sieve pressure swing adsorption (PSA) systems was also collected and discussed. Performance comparisons of these technologies are contained in the body of the report.

Current impact of gene technology on healthcare. A map of economic assessments.

PubMed

Rogowski, Wolf

2007-02-01

It has been claimed that gene technology will induce revolutionary changes in healthcare. This paper investigates how and to what extent these changes have been economically assessed. A generic framework was developed to distinguish between methodologically similar evaluations of healthcare technology. Methodological issues and the current state of economic evidence concerning human DNA technology were extracted from publications within these groups of evaluations. Economic evaluations of "healthcare consisting of gene technology" were identified primarily for in vitro diagnostics for hereditary disease and others for pharmacogenetics and molecular pathology. "Healthcare enabled by gene technology" is far more encompassing and includes, e.g., biotechnology drugs for which various health economic evaluations can be found. Yet here, the impact of gene technology intertwines with the impact of other technologies and is therefore hardly susceptible to evaluation. The fields of evaluation may be classified best according to the two dimensions "purpose" and "stage of development". Current evaluations cover screening, diagnostic and treatment technologies in investigational, new and established stages. Apart from prenatal screening, healthcare consisting of gene technology was cost saving only for genotype tests replacing continuous phenotype tests and for one pharmacogenetic test. Conclusive evidence of favourable cost-effectiveness ratios is available only for few conditions. Hypotheses about the impact of gene technology on healthcare must be explicit about the definition of "genetic" medicine. A general statement regarding healthcare enabled by gene technology is not possible. Based on current evidence, an era of healthcare consisting of gene technology built on widespread predictive testing is not desirable from a health economic viewpoint.

An Overview of Electric Propulsion Activities at NASA

NASA Technical Reports Server (NTRS)

Dunning, John W., Jr.; Hamley, John A.; Jankovsky, Robert S.; Oleson, Steven R.

2004-01-01

This paper provides an overview of NASA s activities in the area of electric propulsion with an emphasis on project directions, recent progress, and a view of future project directions. The goals of the electric propulsion programs are to develop key technologies to enable new and ambitious science missions and to transfer these technologies to industry. Activities include the development of gridded ion thruster technology, Hall thruster technology, pulsed plasma thruster technology, and very high power electric propulsion technology, as well as systems technology that supports practical implementation of these advanced concepts. The performance of clusters of ion and Hall thrusters is being revisited. Mission analyses, based on science requirements and preliminary mission specifications, guide the technology projects and introduce mission planners to new capabilities. Significant in-house activity, with strong industrial/academia participation via contracts and grants, is maintained to address these development efforts. NASA has initiated a program covering nuclear powered spacecraft that includes both reactor and radioisotope power sources. This has provided an impetus to investigate higher power and higher specific impulse thruster systems. NASA continues to work closely with both supplier and user communities to maximize the understanding and acceptance of new technology in a timely and cost-effective manner. NASA s electric propulsion efforts are closely coordinated with Department of Defense and other national programs to assure the most effective use of available resources. Several NASA Centers are actively involved in these electric propulsion activities, including, the Glenn Research Center, Jet Propulsion Laboratory, Johnson Space Center, and Marshall Space Flight Center.

A review of technologies applicable to low-speed flight of high-performance aircraft investigated in the Langley 14- x 22-foot subsonic tunnel

NASA Technical Reports Server (NTRS)

Paulson, John W., Jr.; Quinto, P. Frank; Banks, Daniel W.; Kemmerly, Guy T.; Gatlin, Gregory M.

1988-01-01

An extensive research program has been underway at the NASA Langley Research Center to define and develop the technologies required for low-speed flight of high-performance aircraft. This 10-year program has placed emphasis on both short takeoff and landing (STOL) and short takeoff and vertical landing (STOVL) operations rather than on regular up and away flight. A series of NASA in-house as well as joint projects have studied various technologies including high lift, vectored thrust, thrust-induced lift, reversed thrust, an alternate method of providing trim and control, and ground effects. These technologies have been investigated on a number of configurations ranging from industry designs for advanced fighter aircraft to generic wing-canard research models. Test conditions have ranged from hover (or static) through transition to wing-borne flight at angles of attack from -5 to 40 deg at representative thrust coefficients.

Virtual art revisited

NASA Astrophysics Data System (ADS)

Ruzanka, S.

2014-02-01

Virtual reality art at the turn of the millenium saw an explosion of creative exploration around this nascent technoloy. Though VR art has much in common with media art in general, the affordances of the technology gave rise to unique experiences, discourses, and artistic investigations. Women artists were at the forefront of the medium, shaping its aesthetic and technical development, and VR fostered a range of artistic concerns and experimentation that was largely distinct from closely related forms such as digital games. Today, a new wave of consumer technologies including 3D TV's, gestural and motion tracking interfaces, and headmount displays as viable, low-cost gaming peripherals drives a resurgence in interest in VR for interactive art and entertainment. Designers, game developers, and artists working with these technologies are in many cases discovering them anew. This paper explores ways of reconnecting this current moment in VR with its past. Can the artistic investigations begun in previous waves of VR be continued? How do the similarities and differences in contexts, communities, technologies, and discourses affect the development of the medium?

Teaching Mathematics with Technology: Numerical Relationships.

ERIC Educational Resources Information Center

Bright, George W.

1989-01-01

Developing numerical relationships with calculators is emphasized. Calculators furnish some needed support for students as they investigate the value of fractions as the numerators or denominators change. An example with Logo programing for computers is also included. (MNS)

Investigation of performance deterioration of the CF6/JT9D, high-bypass ratio turbofan engines

NASA Technical Reports Server (NTRS)

Ziemianski, J. A.; Mehalic, C. M.

1980-01-01

The aircraft energy efficiency program within NASA is developing technology required to improve the fuel efficiency of commercial subsonic transport aricraft. One segment of this program includes engine diagnostics which is directed toward determining the sources and causes of performance deterioration in the Pratt and Whitney Aircraft JT9D and General Electric CF6 high-bypass ratio turbofan engines and developing technology for minimizing the performance losses. Results of engine performance deterioration investigations based on historical data, special engine tests, and specific tests to define the influence of flight loads and component clearances on performance are presented. The results of analysis of several damage mechanisms that contribute to performance deterioration such as blade tip rubs, airfoil surface roughness and erosion, and thermal distortion are also included. The significance of these damage mechanisms on component and overall engine performance is discussed.

Cryogenic Fluid Management Facility

NASA Technical Reports Server (NTRS)

Eberhardt, R. N.; Bailey, W. J.; Symons, E. P.; Kroeger, E. W.

1984-01-01

The Cryogenic Fluid Management Facility (CFMF) is a reusable test bed which is designed to be carried into space in the Shuttle cargo bay to investigate systems and technologies required to efficiently and effectively manage cryogens in space. The facility hardware is configured to provide low-g verification of fluid and thermal models of cryogenic storage, transfer concepts and processes. Significant design data and criteria for future subcritical cryogenic storage and transfer systems will be obtained. Future applications include space-based and ground-based orbit transfer vehicles (OTV), space station life support, attitude control, power and fuel depot supply, resupply tankers, external tank (ET) propellant scavenging, space-based weapon systems and space-based orbit maneuvering vehicles (OMV). This paper describes the facility and discusses the cryogenic fluid management technology to be investigated. A brief discussion of the integration issues involved in loading and transporting liquid hydrogen within the Shuttle cargo bay is also included.

Low Carbon Technology Options for the Natural Gas ...

EPA Pesticide Factsheets

The ultimate goal of this task is to perform environmental and economic analysis of natural gas based power production technologies (different routes) to investigate and evaluate strategies for reducing emissions from the power sector. It is a broad research area. Initially, the research will be focused on the preliminary analyses of hydrogen fuel based power production technologies utilizing hydrogen fuel in a large size, heavy-duty gas turbines in integrated reformer combined cycle (IRCC) and integrated gasification combined cycle (IGCC) for electric power generation. The research will be expanded step-by-step to include other advanced (e.g., Net Power, a potentially transformative technology utilizing a high efficiency CO2 conversion cycle (Allam cycle), and chemical looping etc.) pre-combustion and post-combustion technologies applied to natural gas, other fossil fuels (coal and heavy oil) and biomass/biofuel based on findings. Screening analysis is already under development and data for the analysis is being processed. The immediate action on this task include preliminary economic and environmental analysis of power production technologies applied to natural gas. Data for catalytic reforming technology to produce hydrogen from natural gas is being collected and compiled on Microsoft Excel. The model will be expanded for exploring and comparing various technologies scenarios to meet our goal. The primary focus of this study is to: 1) understand the chemic

Support to X-33/Reusable Launch Vehicle Technology Program

NASA Technical Reports Server (NTRS)

2000-01-01

The Primary activities of Lee & Associates for the referenced Purchase Order has been in direct support of the X-33/Reusable Launch Vehicle Technology Program. An independent review to evaluate the X-33 liquid hydrogen fuel tank failure, which recently occurred after-test of the starboard tank has been provided. The purpose of the Investigation team was to assess the tank design modifications, provide an assessment of the testing approach used by MSFC (Marshall Space Flight Center) in determining the flight worthiness of the tank, assessing the structural integrity, and determining the cause of the failure of the tank. The approach taken to satisfy the objectives has been for Lee & Associates to provide the expertise of Mr. Frank Key and Mr. Wayne Burton who have relevant experience from past programs and a strong background of experience in the fields critical to the success of the program. Mr. Key and Mr. Burton participated in the NASA established Failure Investigation Review Team to review the development and process data and to identify any design, testing or manufacturing weaknesses and potential problem areas. This approach worked well in satisfying the objectives and providing the Review Team with valuable information including the development of a Fault Tree. The detailed inputs were made orally in real time in the Review Team daily meetings. The results of the investigation were presented to the MSFC Center Director by the team on February 15, 2000. Attached are four charts taken from that presentation which includes 1) An executive summary, 2) The most probable cause, 3) Technology assessment, and 4) Technology Recommendations for Cryogenic tanks.

Translations on USSR Science and Technology, Physical Sciences and Technology, Number 16

DTIC Science & Technology

1977-08-05

34INVESTIGATION OF SPLITTING OF LIGHT NUCLEI WITH HIGH-ENERGY y -RAYS WITH THE METHOD OF WILSON’S CHAMBER OPERATING IN POWERFUL BEAMS OF ELECTRONIC...boast high reliability, high speed, and extremely modest power requirements. Information oh the Screen Visual display devices greatly facilitate...area of application of these units Includes navigation, control of power systems, machine tools, and manufac- turing processes. Th» ^»abilities of

Technology Development Plan for Design Guidelines for Wave-Induced Hydrodynamic Loading on Structures.

DTIC Science & Technology

1984-03-01

coast), indicate this trend will continue. In addition, further loss of foreign bases is possible, as well as an increase in political restrictions on...endeavors to extend wave forces prediction technology. Numerous other government agencies (both U.S. and foreign ) and private industry investigations...then be included easily in existing NAVFAC documents. The sequence of the task scheduling is important to optimize the exchange of information among

Snapshots of a Culture: How Do American and Turkish Elementary Students Represent Their Cultural Identities Using Technology as a Means of Expression and Communication?

ERIC Educational Resources Information Center

Simsek, Ali; Nuss, Shirley

2010-01-01

The purpose of this study was to investigate how elementary students can learn about the culture of another country and how technology can play a role in this process. The sample of the study included 135 fifth grade students from the United States and Turkey. Initial knowledge and information sources of students were assessed at the beginning of…

Next Steps in the Evolution of Human Spaceflight Training

NASA Technical Reports Server (NTRS)

Balmain, Clint; Niemann, Chris; McGregor, Darrell

2011-01-01

Train before you fly has always been a watchword at NASA, and consequently, NASA has been conducting training for human spaceflight missions for longer than it has been involved in the actual conduct of human spaceflight missions. Throughout that time, NASA s approach to human spaceflight training has continuously evolved to keep pace with the technology of the modern world, but the approach to training itself has not changed significantly. Today, there are more tools and technologies that enable learning than ever before. This paper intends to review the challenges of human spaceflight training and how modern technology and an updated approach could improve that training. The Spaceflight Training Management Office (DA7) within the Mission Operations Directorate (MOD) has been investigating the current training of instructors, flight controllers and astronauts in order to identify where a new approach to training and training management may be necessary to improve the efficacy of the training provided. Through this investigation, the DA7 team has identified potential areas of improvement within International Space Station (ISS) training in a wide range of areas, including the delivery of training, the structure of the training program, the concept of what is considered training, and the management of that training. The ISS is an operational program with an established training paradigm. As such, the implementation of these concepts will be met with several challenges that may prevent or preclude them from being adopted. These challenges include demonstrating return-on-investment (ROI) and overcoming cultural or technological obstacles. This report will delve into the possible improvement areas for training, the future training concepts that are being considered, and the challenges associated with implementation. The paper will include concepts for utilization of Web 2.0 technologies, electronic learning, digital media, and other technologies in the development, management, and conduct of human spaceflight training.

Beyond Barriers: Encouraging Teacher Use of Feedback Resources. A Report from the Teacher Feedback Resources Project

ERIC Educational Resources Information Center

Morgan, Nicholas; Killion, Joellen

2018-01-01

This report investigates factors that drive teachers to embrace or challenge the use of products and services designed to support improvements in practice. Key elements of the study include: (1) Technology-based resources studied include those designed for video observations, peer feedback and collaboration, online professional learning, and…

Performance, Cost, and Market Share of Conventional Vehicle Efficiency Technologies? Retrospective Comparison of Regulatory Document Projections for Corporate Average Fuel Economy and Greenhouse Gas Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Fei; Lin, Zhenhong; Nealer, Rachael

This paper conducted an analysis of regulatory documents on current energy- and greenhouse gas–relevant conventional vehicle efficiency technologies in the corporate average fuel economy standards (2017 to 2025) and greenhouse gas rulemaking context by NHTSA and EPA. The focus was on identifying what technologies today—as estimated now (2015 to 2016)—receive higher or lower expectations with regard to effectiveness, cost, and consumer adoption than what experts projected during the 2010 to 2011 rulemaking period. A broad range of conventional vehicle efficiency technologies, including gasoline engine and diesel engine, transmission, accessory, hybrid, and vehicle body technologies, was investigated in this analysis. Finally,more » most assessed technologies were found to have had better competitiveness than expected with regard to effectiveness or costs, or both, with costs and market penetration more difficult to predict than technology effectiveness.« less

Performance, Cost, and Market Share of Conventional Vehicle Efficiency Technologies? Retrospective Comparison of Regulatory Document Projections for Corporate Average Fuel Economy and Greenhouse Gas Standards

DOE PAGES

Xie, Fei; Lin, Zhenhong; Nealer, Rachael

2017-09-30

This paper conducted an analysis of regulatory documents on current energy- and greenhouse gas–relevant conventional vehicle efficiency technologies in the corporate average fuel economy standards (2017 to 2025) and greenhouse gas rulemaking context by NHTSA and EPA. The focus was on identifying what technologies today—as estimated now (2015 to 2016)—receive higher or lower expectations with regard to effectiveness, cost, and consumer adoption than what experts projected during the 2010 to 2011 rulemaking period. A broad range of conventional vehicle efficiency technologies, including gasoline engine and diesel engine, transmission, accessory, hybrid, and vehicle body technologies, was investigated in this analysis. Finally,more » most assessed technologies were found to have had better competitiveness than expected with regard to effectiveness or costs, or both, with costs and market penetration more difficult to predict than technology effectiveness.« less

An investigation of air transportation technology at the Massachusetts Institute of Technology, 1990-1991

NASA Technical Reports Server (NTRS)

Simpson, Robert W.

1991-01-01

Brief summaries are given of research activities at the Massachusetts Institute of Technology (MIT) under the sponsorship of the FAA/NASA Joint University Program. Topics covered include hazard assessment and cockpit presentation issues for microburst alerting systems; the situational awareness effect of automated air traffic control (ATC) datalink clearance amendments; a graphical simulation system for adaptive, automated approach spacing; an expert system for temporal planning with application to runway configuration management; deterministic multi-zone ice accretion modeling; alert generation and cockpit presentation for an integrated microburst alerting system; and passive infrared ice detection for helicopter applications.

Discuss the impact technological advances in equipment and materials have made on the delivery and outcome of endodontic treatment.

PubMed

Lababidi, Emad Aldin

2013-12-01

Recent advances in endodontic equipment and materials have considerably changed the manner in which endodontic treatment is delivered. Specific technological advances, including nickel-titanium instruments, ultrasonic instruments and the dental operating microscope have been associated with increased efficiency and efficacy of treatment and simplification of delivery. The effects of most of these changes have been tested via in vitro studies and case reports. Ongoing studies should constantly investigate what effects technological advances might have on the outcome of endodontic treatment. © 2013 Australian Society of Endodontology.

Applications of aerospace technology to petroleum exploration. Volume 1: Efforts and results

NASA Technical Reports Server (NTRS)

Jaffe, L. D.

1976-01-01

The feasibility of applying aerospace techniques to help solve significant problems in petroleum exploration is studied. Through contacts with petroleum industry and petroleum service industry, important petroleum exploration problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified where possible. Topics selected for investigation include: seismic reflection systems; down-hole acoustic techniques; identification of geological analogies; drilling methods; remote geological sensing; and sea floor imaging and mapping. Specific areas of aerospace technology are applied to 21 concepts formulated from the topics of concern.

Low-cost Active Structural Control Space Experiment (LASC)

NASA Technical Reports Server (NTRS)

Robinett, Rush; Bukley, Angelia P.

1992-01-01

The DOE Lab Director's Conference identified the need for the DOE National Laboratories to actively and aggressively pursue ways to apply DOE technology to problems of national need. Space structures are key elements of DOD and NASA space systems and a space technology area in which DOE can have a significant impact. LASC is a joint agency space technology experiment (DOD Phillips, NASA Marshall, and DOE Sandia). The topics are presented in viewgraph form and include the following: phase 4 investigator testbed; control of large flexible structures in orbit; INFLEX; Controls, Astrophysics; and structures experiments in space; SARSAT; and LASC mission objectives.

Advanced-to-Revolutionary Space Technology Options - The Responsibly Imaginable

NASA Technical Reports Server (NTRS)

Bushnell, Dennis M.

2013-01-01

Paper summarizes a spectrum of low TRL, high risk technologies and systems approaches which could massively change the cost and safety of space exploration/exploitation/industrialization. These technologies and approaches could be studied in a triage fashion, the method of evaluation wherein several prospective solutions are investigated in parallel to address the innate risk of each, with resources concentrated on the more successful as more is learned. Technology areas addressed include Fabrication, Materials, Energetics, Communications, Propulsion, Radiation Protection, ISRU and LEO access. Overall and conceptually it should be possible with serious research to enable human space exploration beyond LEO both safe and affordable with a design process having sizable positive margins. Revolutionary goals require, generally, revolutionary technologies. By far, Revolutionary Energetics is the most important, has the most leverage, of any advanced technology for space exploration applications.

Impedance spectroscopy of heterojunction solar cell a-SiC/c-Si with ITO antireflection film investigated at different temperatures

NASA Astrophysics Data System (ADS)

Šály, V.; Perný, M.; Janíček, F.; Huran, J.; Mikolášek, M.; Packa, J.

2017-04-01

Progressive smart photovoltaic technologies including heterostructures a-SiC/c-Si with ITO antireflection film are one of the prospective replacements of conventional photovoltaic silicon technology. Our paper is focused on the investigation of heterostructures a-SiC/c-Si provided with a layer of ITO (indium oxide/tin oxide 90/10 wt.%) which acts as a passivating and antireflection coating. Prepared photovoltaic cell structure was investigated at various temperatures and the influence of temperature on its operation was searched. The investigation of the dynamic properties of heterojunction PV cells was carried out using impedance spectroscopy. The equivalent AC circuit which approximates the measured impedance data was proposed. Assessment of the influence of the temperature on the operation of prepared heterostructure was carried out by analysis of the temperature dependence of AC equivalent circuit elements.

Brayton Power Conversion System Study to Advance Technology Readiness for Nuclear Electric Propulsion

NASA Technical Reports Server (NTRS)

Allen, Bog; Delventhal, Rex; Frye, Patrick

2004-01-01

Recently, there has been significant interest within the aerospace community to develop space based nuclear power conversion technologies especially for exploring the outer planets of our solar system where the solar energy density is very low. To investigate these technologies NASA awarded several contracts under Project Prometheus, the Nuclear Systems Program. The studies described in this paper were performed under one of those contracts, which was to investigate the use of a nuclear power conversion system based on the closed Brayton cycle (CBC).The investigation performed included BPCS (Brayton Power Conversion System) trade studies to minimize system weight and radiator area and advance the state of the art of BPCS technology. The primary requirements for studies were a power level of 100 kWe (to the PPU), a low overall power system mass and a lifetime of 15 years (10 years full power). For the radiation environment, the system was to be capable of operation in the generic space environment and withstand the extreme environments surrounding Jupiter. The studies defined a BPCS design traceable to NEP (Nuclear Electric Propulsion) requirements and suitable for future missions with a sound technology plan for technology readiness level (TRL) advancement identified. The studies assumed a turbine inlet temperature approx. 100 C above the current the state of the art capabilities with materials issues and related development tasks identified. Analyses and evaluations of six different HRS (heat rejection system) designs and three primary power management and distribution (PMAD) configurations will be discussed in the paper.

47 CFR 0.111 - Functions of the Bureau.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Engineering and Technology has shared responsibility for radiofrequency equipment and device complaints. (5...); subpart C (Federal-State/Local Relationships [Reserved]; subpart D (carriage of television broadcast... information, conduct investigations, conduct external audits and collect information, including pursuant to...

Investigations of plastic composite materials for highway safety structures

DOT National Transportation Integrated Search

1998-08-01

This report presents a basic overview and assessment of different concepts and technologies of using polymer composites in structures generally used for highway safety. The structural systems included a highway barrier guardrail with its posts and bl...

Reviews of STS Instructional Units.

ERIC Educational Resources Information Center

Reporter, 1987

1987-01-01

Provides reviews of instructional modules suitable for use in a Science-Technology-Society (STS) approach. Includes reviews of print and video materials dealing with clean water, investigating environmental issues, acid rain, toxic waste, scientific decision making, radioactive waste, and consumerism. (TW)

The role of mobile devices in doctor-patient communication: A systematic review and meta-analysis.

PubMed

Kashgary, Abdullah; Alsolaimani, Roaa; Mosli, Mahmoud; Faraj, Samer

2017-09-01

Introduction In the last few years, the use of telecommunication and mobile technology has grown significantly. This has led to a notable increase in the utilization of this telecommunication in healthcare, namely phone calls and text messaging (SMS). However, evaluating its global impact on improving healthcare processes and outcomes demands a more comprehensive assessment. In this study, we focused on the role of mobile devices via phone calls and SMS in patient-doctor communication, and aimed to assess its impact on various health outcomes. Methods Major databases, including MEDLINE, EMBASE, PsycINFO, Global Health, and Cochrane CENTRAL, were searched for clinical trials that investigated mobile-device technology in any facet of doctor-patient communication published between 1990 and April 2015. A meta-analysis was performed where appropriate. Results Sixty-two articles met our inclusion criteria. Of those, 23 articles investigated mobile appointment reminder technologies, 19 investigated medication adherence, 20 investigated disease-control interventions, and two investigated test-result reporting. Patients who received an appointment reminder were 10% less likely to miss an appointment (relative risk [RR] = 1.11, 95% confidence interval [CI] 1.08-1.15). Mobile interventions increased medication adherence by 22% (RR = 1.22, 95% CI 1.09-1.36). Ten of 20 studies examining disease control reported statistically significant reductions in clinically meaningful endpoints. The use of mobile-device interventions improved forced expiratory volume in one second and hemoglobin A1c percentage in meta-analyses. Conclusion The use of mobile-device technologies exerted modest improvements in communication and health outcomes. Further research is needed to determine the true effect of these technologies on doctor-patient communication.

Comparative Transcriptomes and EVO-DEVO Studies Depending on Next Generation Sequencing.

PubMed

Liu, Tiancheng; Yu, Lin; Liu, Lei; Li, Hong; Li, Yixue

2015-01-01

High throughput technology has prompted the progressive omics studies, including genomics and transcriptomics. We have reviewed the improvement of comparative omic studies, which are attributed to the high throughput measurement of next generation sequencing technology. Comparative genomics have been successfully applied to evolution analysis while comparative transcriptomics are adopted in comparison of expression profile from two subjects by differential expression or differential coexpression, which enables their application in evolutionary developmental biology (EVO-DEVO) studies. EVO-DEVO studies focus on the evolutionary pressure affecting the morphogenesis of development and previous works have been conducted to illustrate the most conserved stages during embryonic development. Old measurements of these studies are based on the morphological similarity from macro view and new technology enables the micro detection of similarity in molecular mechanism. Evolutionary model of embryo development, which includes the "funnel-like" model and the "hourglass" model, has been evaluated by combination of these new comparative transcriptomic methods with prior comparative genomic information. Although the technology has promoted the EVO-DEVO studies into a new era, technological and material limitation still exist and further investigations require more subtle study design and procedure.

WTEC panel report on research submersibles and undersea technologies

NASA Technical Reports Server (NTRS)

Seymore, Richard J.; Blidberg, D. Richard; Brancart, Claude P.; Gentry, Larry L.; Kalvaitis, Algis N.; Lee, Michael J.; Mooney, Brad; Walsh, Don

1994-01-01

This report covers research submersibles and related subsea technologies in Finland, France, Russia, Ukraine and the United Kingdom. Manned, teleoperated, and autonomous submersibles were of interest. The panel found that, in contrast to the United States, Europe is making substantial progress in cooperative and coordinated research in subsea technology, including the development of standards. France is a leader in autonomous vehicle technology. Because much less was known a priori about the technologies in Russia and Ukraine, there were more new findings in those countries than in those Western European nations visited. However, Russia and Ukraine have a sizeable (and currently underutilized) infrastructure in this field, including a highly educated and experienced manpower pool, impressive (in some cases unique) facilities for physical testing, extensive fleets of seagoing research vessels capable of long voyages, and state-of-the-art facilities for conducting oceanographic investigations. The panel visited newly-formed commercial companies associated with long-standing submersible R&D and production centers in Russia and Ukraine. So far, these new efforts are undercapitalized, and as such represent opportunities at very low cost for Western nations, as detailed in the site reports.

Counterfeit deterrence and digital imaging technology

NASA Astrophysics Data System (ADS)

Church, Sara E.; Fuller, Reese H.; Jaffe, Annette B.; Pagano, Lorelei W.

2000-04-01

The US government recognizes the growing problem of counterfeiting currency using digital imaging technology, as desktop systems become more sophisticated, less expensive and more prevalent. As the rate of counterfeiting with this type of equipment has grown, the need for specific prevention methods has become apparent to the banknote authorities. As a result, the Treasury Department and Federal Reserve have begun to address issues related specifically to this type of counterfeiting. The technical representatives of these agencies are taking a comprehensive approach to minimize counterfeiting using digital technology. This approach includes identification of current technology solutions for banknote recognition, data stream intervention and output marking, outreach to the hardware and software industries and enhancement of public education efforts. Other aspects include strong support and cooperation with existing international efforts to prevent counterfeiting, review and amendment of existing anti- counterfeiting legislation and investigation of currency design techniques to make faithful reproduction more difficult. Implementation of these steps and others are to lead to establishment of a formal, permanent policy to address and prevent the use of emerging technologies to counterfeit currency.

WTEC panel report on research submersibles and undersea technologies

NASA Astrophysics Data System (ADS)

Seymore, Richard J.; Blidberg, D. Richard; Brancart, Claude P.; Gentry, Larry L.; Kalvaitis, Algis N.; Lee, Michael J.; Mooney, Brad; Walsh, Don

1994-06-01

This report covers research submersibles and related subsea technologies in Finland, France, Russia, Ukraine and the United Kingdom. Manned, teleoperated, and autonomous submersibles were of interest. The panel found that, in contrast to the United States, Europe is making substantial progress in cooperative and coordinated research in subsea technology, including the development of standards. France is a leader in autonomous vehicle technology. Because much less was known a priori about the technologies in Russia and Ukraine, there were more new findings in those countries than in those Western European nations visited. However, Russia and Ukraine have a sizeable (and currently underutilized) infrastructure in this field, including a highly educated and experienced manpower pool, impressive (in some cases unique) facilities for physical testing, extensive fleets of seagoing research vessels capable of long voyages, and state-of-the-art facilities for conducting oceanographic investigations. The panel visited newly-formed commercial companies associated with long-standing submersible R&D and production centers in Russia and Ukraine. So far, these new efforts are undercapitalized, and as such represent opportunities at very low cost for Western nations, as detailed in the site reports.

NASA advanced space photovoltaic technology-status, potential and future mission applications

NASA Technical Reports Server (NTRS)

Flood, Dennis J.; Piszczor, Michael, Jr.; Stella, Paul M.; Bennett, Gary L.

1989-01-01

The NASA program in space photovoltaic research and development encompasses a wide range of emerging options for future space power systems, and includes both cell and array technology development. The long range goals are to develop technology capable of achieving 300 W/kg for planar arrays, and 300 W/sq m for concentrator arrays. InP and GaAs planar and concentrator cell technologies are under investigation for their potential high efficiency and good radiation resistance. The Advanced Photovoltaic Solar Array (APSA) program is a near term effort aimed at demonstrating 130 W/kg beginning of life specific power using thin (62 micrometer) silicon cells. It is intended to be technology transparent to future high efficiency cells and provides the baseline for development of the 300 W/kg array.

Instellar Exploration: Propulsion Options for Precursors and Beyond

NASA Technical Reports Server (NTRS)

Johnson, Charles Les; Leifer, Stephanie

1999-01-01

NASA is considering a mission to explore near-interstellar space early in the next decade as the first step toward a vigorous interstellar exploration program. A key enabling technology for such an ambitious science and exploration effort is the development of propulsion systems capable of providing fast trip times; mission duration should not exceed the professional lifetime of the investigative team. Advanced propulsion technologies that might support an interstellar precursor mission early in the next century include some combination of solar sails, nuclear electric propulsion systems, and aerogravity assists. Follow-on missions to far beyond the heliopause will require the development of propulsion technologies that are only at the conceptual stage today. These include 1) matter-antimatter annihilation, 2) beamed-energy sails, and 3) fusion systems. For years, the scientific community has been interested in the development of solar sail technology to support exploration of the inner and outer planets. Progress in thin-film technology and the development of technologies that may enable the remote assembly of large sails in space are only now maturing to the point where ambitious interstellar precursor missions can be considered. Electric propulsion is now being demonstrated for planetary exploration by the Deep Space 1 mission. The primary issues for it's adaptation to interstellar precursor applications include the nuclear reactor that would be required and the engine lifetime. For further term interstellar missions, matter-antimatter annihilation propulsion system concepts have the highest energy density of any propulsion systems using onboard propellants. However, there are numerous challenges to production and storage of antimatter that must be overcome before it can be seriously considered for interstellar flight. Off-board energy systems (laser sails) are candidates for long-distance interstellar flight but development of component technologies and necessary infrastructure have not begun.. Fusion propulsion has been studied extensively. However, fusion technology is still considered immature, even after many decades of well-funded research. Furthermore, fusion alone does not offer high enough energy density to make it a viable candidate for interstellar propulsion unless propellant can be collected in situ, as was considered by R. Bussard for his interstellar ramjet concept. The current research in investigating these propulsion systems will be described, and the range of application of each technology will be explored.

Monitoring human health behaviour in one's living environment: a technological review.

PubMed

Lowe, Shane A; Ólaighin, Gearóid

2014-02-01

The electronic monitoring of human health behaviour using computer techniques has been an active research area for the past few decades. A wide array of different approaches have been investigated using various technologies including inertial sensors, Global Positioning System, smart homes, Radio Frequency IDentification and others. It is only in recent years that research has turned towards a sensor fusion approach using several different technologies in single systems or devices. These systems allow for an increased volume of data to be collected and for activity data to be better used as measures of behaviour. This change may be due to decreasing hardware costs, smaller sensors, increased power efficiency or increases in portability. This paper is intended to act as a reference for the design of multi-sensor behaviour monitoring systems. The range of technologies that have been used in isolation for behaviour monitoring both in research and commercial devices are reviewed and discussed. Filtering, range, sensitivity, usability and other considerations of different technologies are discussed. A brief overview of commercially available activity monitors and their technology is also included. Copyright © 2013 IPEM. Published by Elsevier Ltd. All rights reserved.

Development and flight test experiences with a flight-crucial digital control system

NASA Technical Reports Server (NTRS)

Mackall, Dale A.

1988-01-01

Engineers and scientists in the advanced fighter technology integration (AFTI) F-16 program investigated the integration of emerging technologies into an advanced fighter aircraft. AFTI's three major technologies included: flight-crucial digital control, decoupled aircraft flight control, and integration of avionics, flight control, and pilot displays. In addition to investigating improvements in fighter performance, researchers studied the generic problems confronting the designers of highly integrated flight-crucial digital control. An overview is provided of both the advantages and problems of integration digital control systems. Also, an examination of the specification, design, qualification, and flight test life-cycle phase is provided. An overview is given of the fault-tolerant design, multimoded decoupled flight control laws, and integrated avionics design. The approach to qualifying the software and system designs is discussed, and the effects of design choices on system qualification are highlighted.

Forensic DNA phenotyping: Developing a model privacy impact assessment.

PubMed

Scudder, Nathan; McNevin, Dennis; Kelty, Sally F; Walsh, Simon J; Robertson, James

2018-05-01

Forensic scientists around the world are adopting new technology platforms capable of efficiently analysing a larger proportion of the human genome. Undertaking this analysis could provide significant operational benefits, particularly in giving investigators more information about the donor of genetic material, a particularly useful investigative lead. Such information could include predicting externally visible characteristics such as eye and hair colour, as well as biogeographical ancestry. This article looks at the adoption of this new technology from a privacy perspective, using this to inform and critique the application of a Privacy Impact Assessment to this emerging technology. Noting the benefits and limitations, the article develops a number of themes that would influence a model Privacy Impact Assessment as a contextual framework for forensic laboratories and law enforcement agencies considering implementing forensic DNA phenotyping for operational use. Copyright © 2018 Elsevier B.V. All rights reserved.

Reduction of dioxin-like toxicity in effluents by additional wastewater treatment and related effects in fish.

PubMed

Maier, Diana; Benisek, Martin; Blaha, Ludek; Dondero, Francesco; Giesy, John P; Köhler, Heinz-R; Richter, Doreen; Scheurer, Marco; Triebskorn, Rita

2016-10-01

Efficiency of advanced wastewater treatment technologies to reduce micropollutants which mediate dioxin-like toxicity was investigated. Technologies compared included ozonation, powdered activated carbon and granular activated carbon. In addition to chemical analyses in samples of effluents, surface waters, sediments, and fish, (1) dioxin-like potentials were measured in paired samples of effluents, surface waters, and sediments by use of an in vitro biotest (reporter gene assay) and (2) dioxin-like effects were investigated in exposed fish by use of in vivo activity of the mixed-function, monooxygenase enzyme, ethoxyresorufin O-deethylase (EROD) in liver. All advanced technologies studied, based on degradation or adsorption, significantly reduced dioxin-like potentials in samples and resulted in lesser EROD activity in livers of fish. Results of in vitro and in vivo biological responses were not clearly related to quantification of targeted analytes by use of instrumental analyses. Copyright © 2016 Elsevier Inc. All rights reserved.

Navy Omni-Directional Vehicle (ODV) development program

NASA Technical Reports Server (NTRS)

Mcgowen, Hillery

1994-01-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

Navy Omni-Directional Vehicle (ODV) development program

NASA Astrophysics Data System (ADS)

McGowen, Hillery

1994-02-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

Effect of dynamic high pressure on technological properties of cashew tree gum (Anacardium occidentale L.).

PubMed

Porto, Bruna Castro; Augusto, Pedro E D; Terekhov, Anton; Hamaker, Bruce R; Cristianini, Marcelo

2015-09-20

Dynamic high pressure (DHP) appears to be an alternative approach to physical modification of polysaccharides aimed improving their technological properties. Therefore, its effect on the functional properties of polysaccharides (i.e., oil absorption capacity, emulsifier, and rheology) needs to be investigated. Cashew tree gum (CG) is a biological macromolecule that has been proposed to be used as an emulsifier in beverage emulsions. To the best of our knowledge, none of the articles in the literature investigates the effect of DHP on the CG properties. This work presents a study on the evaluation of the effects of DHP on functional characteristics of CG, including rheological properties, molecular weight, glycosyl-linkage analysis, solubility, swelling and oil absorption capacity (OAC). The results suggest that DHP is able to modify the technological properties of cashew tree gum (increasing solubility and decreasing apparent viscosity). Copyright © 2015 Elsevier Ltd. All rights reserved.

Many-body effects and excitonic features in 2D biphenylene carbon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lüder, Johann, E-mail: johann.luder@physics.uu.se; Puglia, Carla; Eriksson, Olle

2016-01-14

The remarkable excitonic effects in low dimensional materials in connection to large binding energies of excitons are of great importance for research and technological applications such as in solar energy and quantum information processing as well as for fundamental investigations. In this study, the unique electronic and excitonic properties of the two dimensional carbon network biphenylene carbon were investigated with GW approach and the Bethe-Salpeter equation accounting for electron correlation effects and electron-hole interactions, respectively. Biphenylene carbon exhibits characteristic features including bright and dark excitons populating the optical gap of 0.52 eV and exciton binding energies of 530 meV asmore » well as a technologically relevant intrinsic band gap of 1.05 eV. Biphenylene carbon’s excitonic features, possibly tuned, suggest possible applications in the field of solar energy and quantum information technology in the future.« less

All-printed smart structures: a viable option?

NASA Astrophysics Data System (ADS)

O'Donnell, John; Ahmadkhanlou, Farzad; Yoon, Hwan-Sik; Washington, Gregory

2014-03-01

The last two decades have seen evolution of smart materials and structures technologies from theoretical concepts to physical realization in many engineering fields. These include smart sensors and actuators, active damping and vibration control, biomimetics, and structural health monitoring. Recently, additive manufacturing technologies such as 3D printing and printed electronics have received attention as methods to produce 3D objects or electronic components for prototyping or distributed manufacturing purposes. In this paper, the viability of manufacturing all-printed smart structures, with embedded sensors and actuators, will be investigated. To this end, the current 3D printing and printed electronics technologies will be reviewed first. Then, the plausibility of combining these two different additive manufacturing technologies to create all-printed smart structures will be discussed. Potential applications for this type of all-printed smart structures include most of the traditional smart structures where sensors and actuators are embedded or bonded to the structures to measure structural response and cause desired static and dynamic changes in the structure.

Geostationary platform systems concepts definition study. Volume 2: Technical, book 3

NASA Technical Reports Server (NTRS)

1980-01-01

The supporting research and technology, and space demonstrations required to support the 1990s operational geostationary platforms are identified. Also the requirements on and interfaces with the Space Transportation System hardware elements supporting the geostationary platform program, including the shuttle, orbital transfer vehicles, teleoperator, etc., are investigated to provide integrated support requirements. Finally, a preliminary evaluation of the practicability and capabilities of an experimental platform from the standpoint of technology, schedule, and cost is given.

Air Vehicle Integration and Technology Research (AVIATR). Task Order 0003: Condition-Based Maintenance Plus Structural Integrity (CBM+SI) Demonstration (April 2011 to August 2011)

DTIC Science & Technology

2011-08-01

investigated. Implementation of this technology into the maintenance framework depends on several factors, including safety of the structural system, cost... Maintenance Parameters The F-15 Program has indicated that, in practice , maintenance actions are generally performed on flight hour multiples of 200...Risk Analysis or the Perform Cost Benefit Analysis sections of the flowchart. 4.6. Determine System Configurations The current maintenance practice

Investigating Veterinary Medicine Faculty Perceptions of Lecture Capture: Issues, Concerns, and Promises.

PubMed

Kwiatkowski, Alison C; Demirbilek, Muhammet

Lecture capture technology is becoming more pervasive in today's classrooms. Students are demanding their lectures be recorded, but many instructors remain resistant. The goal of this study was to investigate faculty perceptions of lecture capture and to understand their concerns with the technology. Through a review of the existing literature, three common reasons for not recording were identified: impact on class attendance, incompatible pedagogy, and technical concerns. To test the hypotheses, an electronic survey was created and distributed to the faculty of a veterinary college in the southeastern US. The survey included both quantitative and qualitative questions. An invitation was emailed to all 134 faculty members, garnering 50 responses. Results were consistent with the hypotheses. Impact on class attendance, teaching styles, and technical considerations have dissuaded many instructors from adopting lecture capture technology. However, a fourth theme that emerged was faculty lack of awareness/familiarity. According to the qualitative responses, many faculty either did not know lecture recording was available in their teaching spaces or were not trained in how to use the technology. Recommendations for future research include distributing the survey campus-wide and providing more opportunities for faculty training. It would also be worthwhile to repeat the survey after providing more information and training materials to faculty, or after switching from an opt-in to an opt-out approach, to see whether perceptions have changed among the college's faculty.

Humane Education: Science, Technology, and Society in the English Classroom.

ERIC Educational Resources Information Center

Emeigh, Tonya Huber

1988-01-01

Presents "Beastly Thoughts," a holistic writing module designed to involve students in decision-making processes about socially relevant issues regarding animals. Provides 48 activities for investigation and lists 33 references for possible book reviews. Includes 38 references. (MVL)

Optimal glass-ceramic structures: Components of giant mirror telescopes

NASA Technical Reports Server (NTRS)

Eschenauer, Hans A.

1990-01-01

Detailed investigations are carried out on optimal glass-ceramic mirror structures of terrestrial space technology (optical telescopes). In order to find an optimum design, a nonlinear multi-criteria optimization problem is formulated. 'Minimum deformation' at 'minimum weight' are selected as contradictory objectives, and a set of further constraints (quilting effect, optical faults etc.) is defined and included. A special result of the investigations is described.

Study of space shuttle orbiter system management computer function. Volume 2: Automated performance verification concepts

NASA Technical Reports Server (NTRS)

1975-01-01

The findings are presented of investigations on concepts and techniques in automated performance verification. The investigations were conducted to provide additional insight into the design methodology and to develop a consolidated technology base from which to analyze performance verification design approaches. Other topics discussed include data smoothing, function selection, flow diagrams, data storage, and shuttle hydraulic systems.

Biases associated with genotype and sex in prediction of fat-free lean mass and carcass value in hogs.

PubMed

Hicks, C; Schinckel, A P; Forrest, J C; Akridge, J T; Wagner, J R; Chen, W

1998-09-01

Carcass and live measurements of 165 market hogs that represented seven genotypes were used to investigate genotype and sex biases associated with the prediction of fat-free lean mass (FFLM) and carcass value. Carcass value was determined as the sum of the product of weight of individual cuts and their average unit prices adjusted for slaughter and processing costs. Independent variables used in the prediction equations included carcass measurements, such as optical probe, midline ruler, ribbed carcass measurements, and electromagnetic scanning (EMSCAN), and live animal ultrasonic scanning. The effect of including subpopulation mean values of independent variables in the prediction equations for FFLM and carcass value was also investigated. Genotype and sex biases were found in equations in which midline backfat, ribbed carcass, EMSCAN, and live ultrasonic scanning were used as single technology sets of measurements. The prediction equations generally undervalued genotypes with above-average carcass value. Biases were reduced when measurements of combined technologies and mean adjusted variables were used. The FFLM and carcass value of gilts were underestimated, and they were overestimated of barrows. Equations that combined OP and EMSCAN technologies were the most accurate and least biased for both FFLM and carcass value. Equations that included carcass weight and midline last-rib backfat thickness measurements were the least accurate and most biased. Genotype and sex biases must be considered when predicting FFLM and carcass value.

Floating the Ball: Advances in the Technology of Electrostatic Levitation

NASA Technical Reports Server (NTRS)

Rogers, Jan R.

2006-01-01

Electrostatic Levitation (ESL) is an emerging technology. The MSFC ESL is a NASA facility that supports investigations of refractory solids and melts. The facility can be used to process a wide variety of materials including metals, alloys, ceramics, glasses and semiconductors. Containerless processing via ESL provides a high-purity environment for the study of high temperature materials and access to metastable states. Scientific topics investigated in the facility include nucleation, undercooling, metastable state formation and metallic glass formation. Additionally, the MSFC ESL provides data for the determination of phase diagrams, time-temperature-transition diagrams, viscosity, surface tension, density, heat capacity and creep resistance. In order to support a diverse research community, the MSFC ESL facility has developed a number of technical capabilities, including a portable system for in situ studies of structural tran$hrmations during processing at the high-energy X-ray beamline at the Advanced Photon Source of Argonne National Laboratory. The capabilities of the MSFC ESL facilities will be discussed and selected results of materials processing and characterization studies will be presented.

Concepts for fast acquisition in optical communications systems

NASA Astrophysics Data System (ADS)

Wilkerson, Brandon L.; Giggenbach, Dirk; Epple, Bernhard

2006-09-01

As free-space laser communications systems proliferate due to improved technology and transmission techniques, optical communication networks comprised of ground stations, aircraft, high altitude platforms, and satellites become an attainable goal. An important consideration for optical networks is the ability of optical communication terminals (OCT) to quickly locate one another and align their laser beams to initiate the acquisition sequence. This paper investigates promising low-cost technologies and novel approaches that will facilitate the targeting and acquisition tasks between counter terminals. Specifically, two critical technology areas are investigated: position determination (which includes location and attitude determination) and inter-terminal communications. A feasibility study identified multiple-antenna global navigation satellite system (GNSS) systems and GNSS-aided inertial systems as possible position determination solutions. Personal satellite communication systems (e.g. Iridium or Inmarsat), third generation cellular technology (IMT-2000/UMTS), and a relatively new air traffic surveillance technology called Autonomous Dependent Surveillance-Broadcast (ADS-B) were identified as possible inter-terminal communication solutions. A GNSS-aided inertial system and an ADS-B system were integrated into an OCT to demonstrate their utility in a typical optical communication scenario. Testing showed that these technologies have high potential in future OCTs, although improvements can be made to both to increase tracking accuracy.

The Development of Micromachined Gyroscope Structure and Circuitry Technology

PubMed Central

Xia, Dunzhu; Yu, Cheng; Kong, Lun

2014-01-01

This review surveys micromachined gyroscope structure and circuitry technology. The principle of micromachined gyroscopes is first introduced. Then, different kinds of MEMS gyroscope structures, materials and fabrication technologies are illustrated. Micromachined gyroscopes are mainly categorized into micromachined vibrating gyroscopes (MVGs), piezoelectric vibrating gyroscopes (PVGs), surface acoustic wave (SAW) gyroscopes, bulk acoustic wave (BAW) gyroscopes, micromachined electrostatically suspended gyroscopes (MESGs), magnetically suspended gyroscopes (MSGs), micro fiber optic gyroscopes (MFOGs), micro fluid gyroscopes (MFGs), micro atom gyroscopes (MAGs), and special micromachined gyroscopes. Next, the control electronics of micromachined gyroscopes are analyzed. The control circuits are categorized into typical circuitry and special circuitry technologies. The typical circuitry technologies include typical analog circuitry and digital circuitry, while the special circuitry consists of sigma delta, mode matching, temperature/quadrature compensation and novel special technologies. Finally, the characteristics of various typical gyroscopes and their development tendency are discussed and investigated in detail. PMID:24424468

A Survey on Gas Sensing Technology

PubMed Central

Liu, Xiao; Cheng, Sitian; Liu, Hong; Hu, Sha; Zhang, Daqiang; Ning, Huansheng

2012-01-01

Sensing technology has been widely investigated and utilized for gas detection. Due to the different applicability and inherent limitations of different gas sensing technologies, researchers have been working on different scenarios with enhanced gas sensor calibration. This paper reviews the descriptions, evaluation, comparison and recent developments in existing gas sensing technologies. A classification of sensing technologies is given, based on the variation of electrical and other properties. Detailed introduction to sensing methods based on electrical variation is discussed through further classification according to sensing materials, including metal oxide semiconductors, polymers, carbon nanotubes, and moisture absorbing materials. Methods based on other kinds of variations such as optical, calorimetric, acoustic and gas-chromatographic, are presented in a general way. Several suggestions related to future development are also discussed. Furthermore, this paper focuses on sensitivity and selectivity for performance indicators to compare different sensing technologies, analyzes the factors that influence these two indicators, and lists several corresponding improved approaches. PMID:23012563

Optimal Management of the Critically Ill: Anaesthesia, Monitoring, Data Capture, and Point-of-Care Technological Practices in Ovine Models of Critical Care

PubMed Central

Shekar, Kiran; Tung, John-Paul; Dunster, Kimble R.; Platts, David; Watts, Ryan P.; Gregory, Shaun D.; Simonova, Gabriela; McDonald, Charles; Hayes, Rylan; Bellpart, Judith; Timms, Daniel; Fung, Yoke L.; Toon, Michael; Maybauer, Marc O.; Fraser, John F.

2014-01-01

Animal models of critical illness are vital in biomedical research. They provide possibilities for the investigation of pathophysiological processes that may not otherwise be possible in humans. In order to be clinically applicable, the model should simulate the critical care situation realistically, including anaesthesia, monitoring, sampling, utilising appropriate personnel skill mix, and therapeutic interventions. There are limited data documenting the constitution of ideal technologically advanced large animal critical care practices and all the processes of the animal model. In this paper, we describe the procedure of animal preparation, anaesthesia induction and maintenance, physiologic monitoring, data capture, point-of-care technology, and animal aftercare that has been successfully used to study several novel ovine models of critical illness. The relevant investigations are on respiratory failure due to smoke inhalation, transfusion related acute lung injury, endotoxin-induced proteogenomic alterations, haemorrhagic shock, septic shock, brain death, cerebral microcirculation, and artificial heart studies. We have demonstrated the functionality of monitoring practices during anaesthesia required to provide a platform for undertaking systematic investigations in complex ovine models of critical illness. PMID:24783206

Nanopore-based fourth-generation DNA sequencing technology.

PubMed

Feng, Yanxiao; Zhang, Yuechuan; Ying, Cuifeng; Wang, Deqiang; Du, Chunlei

2015-02-01

Nanopore-based sequencers, as the fourth-generation DNA sequencing technology, have the potential to quickly and reliably sequence the entire human genome for less than $1000, and possibly for even less than $100. The single-molecule techniques used by this technology allow us to further study the interaction between DNA and protein, as well as between protein and protein. Nanopore analysis opens a new door to molecular biology investigation at the single-molecule scale. In this article, we have reviewed academic achievements in nanopore technology from the past as well as the latest advances, including both biological and solid-state nanopores, and discussed their recent and potential applications. Copyright © 2015 The Authors. Production and hosting by Elsevier Ltd.. All rights reserved.

Next-generation avionics packaging and cooling 'test results from a prototype system'

NASA Astrophysics Data System (ADS)

Seals, J. D.

The author reports on the design, material characteristics, and test results obtained under the US Air Force's advanced aircraft avionics packaging technologies (AAAPT) program, whose charter is to investigate new designs and technologies for reliable packaging, interconnection, and thermal management. Under this program, AT&T Bell Laboratories has completed the preliminary testing of and is evaluating a number of promising materials and technologies, including conformal encapsulation, liquid flow-through cooling, and a cyanate ester backplane. A fifty-two module system incorporating these and and other technologies has undergone preliminary cooling efficiency, shock, sine and random vibration, and maintenance testing. One of the primary objectives was to evaluate the interaction compatibility of new materials and designs with other components in the system.

Recent developments in the use of online resources and mobile technologies to support mental health care.

PubMed

Turvey, Carolyn L; Roberts, Lisa J

2015-01-01

This review describes recent developments in online and mobile mental health applications, including a discussion of patient portals to support mental health care. These technologies are rapidly evolving, often before there is systematic investigation of their effectiveness. Though there are some reviews of the effectiveness of mental health mobile apps, perhaps the more significant development is innovation in technology evaluation as well as new models of interprofessional collaboration in developing behavioural health technologies. Online mental health programs have a strong evidence base. Their role in population health strategies needs further exploration, including the most effective use of limited clinical staff resources. Patient portals and personal health records serve to enhance mental health treatment also, though concerns specific to mental health must be addressed to support broader adoption of portals. Provider concerns about sharing psychiatric notes with patients hinder support for portals. Health information exchange for mental health information requires thoughtful consent management strategies so mental health patients can benefit. Finally, the broad array of health information technologies may overwhelm patients. User-friendly, well-designed, patient-centred health information technology homes may integrate these functions to promote a holistic approach to care plans and overall wellness. Such technology homes have special security needs and require providers and patients to be well informed about how best to use these technologies to support behavioural health interventions.

The efficacy of cognitive prosthetic technology for people with memory impairments: a systematic review and meta-analysis.

PubMed

Jamieson, Matthew; Cullen, Breda; McGee-Lennon, Marilyn; Brewster, Stephen; Evans, Jonathan J

2014-01-01

Technology can compensate for memory impairment. The efficacy of assistive technology for people with memory difficulties and the methodology of selected studies are assessed. A systematic search was performed and all studies that investigated the impact of technology on memory performance for adults with impaired memory resulting from acquired brain injury (ABI) or a degenerative disease were included. Two 10-point scales were used to compare each study to an ideally reported single case experimental design (SCED) study (SCED scale; Tate et al., 2008 ) or randomised control group study (PEDro-P scale; Maher, Sherrington, Herbert, Moseley, & Elkins, 2003 ). Thirty-two SCED (mean = 5.9 on the SCED scale) and 11 group studies (mean = 4.45 on the PEDro-P scale) were found. Baseline and intervention performance for each participant in the SCED studies was re-calculated using non-overlap of all pairs (Parker & Vannest, 2009 ) giving a mean score of 0.85 on a 0 to 1 scale (17 studies, n = 36). A meta-analysis of the efficacy of technology vs. control in seven group studies gave a large effect size (d = 1.27) (n = 147). It was concluded that prosthetic technology can improve performance on everyday tasks requiring memory. There is a specific need for investigations of technology for people with degenerative diseases.

Gold nanoparticle contrast agents in advanced X-ray imaging technologies.

PubMed

Ahn, Sungsook; Jung, Sung Yong; Lee, Sang Joon

2013-05-17

Recently, there has been significant progress in the field of soft- and hard-X-ray imaging for a wide range of applications, both technically and scientifically, via developments in sources, optics and imaging methodologies. While one community is pursuing extensive applications of available X-ray tools, others are investigating improvements in techniques, including new optics, higher spatial resolutions and brighter compact sources. For increased image quality and more exquisite investigation on characteristic biological phenomena, contrast agents have been employed extensively in imaging technologies. Heavy metal nanoparticles are excellent absorbers of X-rays and can offer excellent improvements in medical diagnosis and X-ray imaging. In this context, the role of gold (Au) is important for advanced X-ray imaging applications. Au has a long-history in a wide range of medical applications and exhibits characteristic interactions with X-rays. Therefore, Au can offer a particular advantage as a tracer and a contrast enhancer in X-ray imaging technologies by sensing the variation in X-ray attenuation in a given sample volume. This review summarizes basic understanding on X-ray imaging from device set-up to technologies. Then this review covers recent studies in the development of X-ray imaging techniques utilizing gold nanoparticles (AuNPs) and their relevant applications, including two- and three-dimensional biological imaging, dynamical processes in a living system, single cell-based imaging and quantitative analysis of circulatory systems and so on. In addition to conventional medical applications, various novel research areas have been developed and are expected to be further developed through AuNP-based X-ray imaging technologies.

The MOBI-Kids Study Protocol: Challenges in Assessing Childhood and Adolescent Exposure to Electromagnetic Fields from Wireless Telecommunication Technologies and Possible Association with Brain Tumor Risk

PubMed Central

Sadetzki, Siegal; Langer, Chelsea Eastman; Bruchim, Revital; Kundi, Michael; Merletti, Franco; Vermeulen, Roel; Kromhout, Hans; Lee, Ae-Kyoung; Maslanyj, Myron; Sim, Malcolm R.; Taki, Masao; Wiart, Joe; Armstrong, Bruce; Milne, Elizabeth; Benke, Geza; Schattner, Rosa; Hutter, Hans-Peter; Woehrer, Adelheid; Krewski, Daniel; Mohipp, Charmaine; Momoli, Franco; Ritvo, Paul; Spinelli, John; Lacour, Brigitte; Delmas, Dominique; Remen, Thomas; Radon, Katja; Weinmann, Tobias; Klostermann, Swaantje; Heinrich, Sabine; Petridou, Eleni; Bouka, Evdoxia; Panagopoulou, Paraskevi; Dikshit, Rajesh; Nagrani, Rajini; Even-Nir, Hadas; Chetrit, Angela; Maule, Milena; Migliore, Enrica; Filippini, Graziella; Miligi, Lucia; Mattioli, Stefano; Yamaguchi, Naohito; Kojimahara, Noriko; Ha, Mina; Choi, Kyung-Hwa; Mannetje, Andrea ’t; Eng, Amanda; Woodward, Alistair; Carretero, Gema; Alguacil, Juan; Aragones, Nuria; Suare-Varela, Maria Morales; Goedhart, Geertje; Schouten-van Meeteren, A. Antoinette Y. N.; Reedijk, A. Ardine M. J.; Cardis, Elisabeth

2014-01-01

The rapid increase in mobile phone use in young people has generated concern about possible health effects of exposure to radiofrequency (RF) and extremely low frequency (ELF) electromagnetic fields (EMF). MOBI-Kids, a multinational case–control study, investigates the potential effects of childhood and adolescent exposure to EMF from mobile communications technologies on brain tumor risk in 14 countries. The study, which aims to include approximately 1,000 brain tumor cases aged 10–24 years and two individually matched controls for each case, follows a common protocol and builds upon the methodological experience of the INTERPHONE study. The design and conduct of a study on EMF exposure and brain tumor risk in young people in a large number of countries is complex and poses methodological challenges. This manuscript discusses the design of MOBI-Kids and describes the challenges and approaches chosen to address them, including: (1) the choice of controls operated for suspected appendicitis, to reduce potential selection bias related to low response rates among population controls; (2) investigating a young study population spanning a relatively wide age range; (3) conducting a large, multinational epidemiological study, while adhering to increasingly stricter ethics requirements; (4) investigating a rare and potentially fatal disease; and (5) assessing exposure to EMF from communication technologies. Our experience in thus far developing and implementing the study protocol indicates that MOBI-Kids is feasible and will generate results that will contribute to the understanding of potential brain tumor risks associated with use of mobile phones and other wireless communications technologies among young people. PMID:25295243

The MOBI-Kids Study Protocol: Challenges in Assessing Childhood and Adolescent Exposure to Electromagnetic Fields from Wireless Telecommunication Technologies and Possible Association with Brain Tumor Risk.

PubMed

Sadetzki, Siegal; Langer, Chelsea Eastman; Bruchim, Revital; Kundi, Michael; Merletti, Franco; Vermeulen, Roel; Kromhout, Hans; Lee, Ae-Kyoung; Maslanyj, Myron; Sim, Malcolm R; Taki, Masao; Wiart, Joe; Armstrong, Bruce; Milne, Elizabeth; Benke, Geza; Schattner, Rosa; Hutter, Hans-Peter; Woehrer, Adelheid; Krewski, Daniel; Mohipp, Charmaine; Momoli, Franco; Ritvo, Paul; Spinelli, John; Lacour, Brigitte; Delmas, Dominique; Remen, Thomas; Radon, Katja; Weinmann, Tobias; Klostermann, Swaantje; Heinrich, Sabine; Petridou, Eleni; Bouka, Evdoxia; Panagopoulou, Paraskevi; Dikshit, Rajesh; Nagrani, Rajini; Even-Nir, Hadas; Chetrit, Angela; Maule, Milena; Migliore, Enrica; Filippini, Graziella; Miligi, Lucia; Mattioli, Stefano; Yamaguchi, Naohito; Kojimahara, Noriko; Ha, Mina; Choi, Kyung-Hwa; Mannetje, Andrea 't; Eng, Amanda; Woodward, Alistair; Carretero, Gema; Alguacil, Juan; Aragones, Nuria; Suare-Varela, Maria Morales; Goedhart, Geertje; Schouten-van Meeteren, A Antoinette Y N; Reedijk, A Ardine M J; Cardis, Elisabeth

2014-01-01

The rapid increase in mobile phone use in young people has generated concern about possible health effects of exposure to radiofrequency (RF) and extremely low frequency (ELF) electromagnetic fields (EMF). MOBI-Kids, a multinational case-control study, investigates the potential effects of childhood and adolescent exposure to EMF from mobile communications technologies on brain tumor risk in 14 countries. The study, which aims to include approximately 1,000 brain tumor cases aged 10-24 years and two individually matched controls for each case, follows a common protocol and builds upon the methodological experience of the INTERPHONE study. The design and conduct of a study on EMF exposure and brain tumor risk in young people in a large number of countries is complex and poses methodological challenges. This manuscript discusses the design of MOBI-Kids and describes the challenges and approaches chosen to address them, including: (1) the choice of controls operated for suspected appendicitis, to reduce potential selection bias related to low response rates among population controls; (2) investigating a young study population spanning a relatively wide age range; (3) conducting a large, multinational epidemiological study, while adhering to increasingly stricter ethics requirements; (4) investigating a rare and potentially fatal disease; and (5) assessing exposure to EMF from communication technologies. Our experience in thus far developing and implementing the study protocol indicates that MOBI-Kids is feasible and will generate results that will contribute to the understanding of potential brain tumor risks associated with use of mobile phones and other wireless communications technologies among young people.

An ESA roadmap for geobiology in space exploration

NASA Astrophysics Data System (ADS)

Cousins, Claire R.; Cockell, Charles S.

2016-01-01

Geobiology, and in particular mineral-microbe interactions, has a significant role to play in current and future space exploration. This includes the search for biosignatures in extraterrestrial environments, and the human exploration of space. Microorganisms can be exploited to advance such exploration, such as through biomining, maintenance of life-support systems, and testing of life-detection instrumentation. In view of these potential applications, a European Space Agency (ESA) Topical Team "Geobiology in Space Exploration" was developed to explore these applications, and identify research avenues to be investigated to support this endeavour. Through community workshops, a roadmap was produced, with which to define future research directions via a set of 15 recommendations spanning three key areas: Science, Technology, and Community. These roadmap recommendations identify the need for research into: (1) new terrestrial space-analogue environments; (2) community level microbial-mineral interactions; (3) response of biofilms to the space environment; (4) enzymatic and biochemical mineral interaction; (5) technical refinement of instrumentation for space-based microbiology experiments, including precursor flight tests; (6) integration of existing ground-based planetary simulation facilities; (7) integration of fieldsite biogeography with laboratory- and field-based research; (8) modification of existing planetary instruments for new geobiological investigations; (9) development of in situ sample preparation techniques; (10) miniaturisation of existing analytical methods, such as DNA sequencing technology; (11) new sensor technology to analyse chemical interaction in small volume samples; (12) development of reusable Lunar and Near Earth Object experimental platforms; (13) utility of Earth-based research to enable the realistic pursuit of extraterrestrial biosignatures; (14) terrestrial benefits and technological spin-off from existing and future space-based geobiology investigations; and (15) new communication avenues between space agencies and terrestrial research organisations to enable this impact to be developed.

Occurrence and elimination of antibiotics in three sewage treatment plants with different treatment technologies in Urumqi and Shihezi, Xinjiang.

PubMed

Liu, Jiang; Lu, Jianjiang; Tong, Yanbin; Li, Chao

2017-03-01

Fourteen antibiotics, including five quinolones (QNs), five sulfonamides (SAs), and four tetracyclines (TCs), were selected to investigate their occurrence and elimination in three sewage treatment plants (STPs) by employing different treatment technologies in Urumqi (two STPs) and Shihezi (one STP), China. The STP in Shihezi was chosen as representative to investigate the distribution of antibiotics in a sludge-sewage system. Results showed that the concentrations of most detected antibiotics ranged from tens to hundreds of nanograms per liter in influent samples and under 100 ng L -1 in effluent samples. QNs and TCs were dominant species with concentrations of 2.33 mg kg -1 to 3.34 mg kg -1 and 0.36 mg kg -1 to 0.47 mg kg -1 in sludge samples, respectively. The elimination rates of target antibiotics by various STPs ranged from 17% to 100%. The STP with anaerobic/anoxic/aerobic and membrane bio-reactor technology removed antibiotics more efficiently than those with anaerobic/anoxic/oxic and oxidation ditch technology. The elimination capacities of treatment units from the three STPs were also investigated. SAs were mainly degraded in biological treatment units; conversely, QNs and TCs were significantly eliminated in sedimentary treatment units. Ozonation effectively removed remaining antibiotics but not UV and chlorination disinfection in this study.

Complete denture analyzed by optical coherence tomography

NASA Astrophysics Data System (ADS)

Negrutiu, Meda L.; Sinescu, Cosmin; Todea, Carmen; Podoleanu, Adrian G.

2008-02-01

The complete dentures are currently made using different technologies. In order to avoid deficiencies of the prostheses made using the classical technique, several alternative systems and procedures were imagined, directly related to the material used and also to the manufacturing technology. Thus, at the present time, there are several injecting systems and technologies on the market, that use chemoplastic materials, which are heat cured (90-100°C), in dry or wet environment, or cold cured (below 60°C). There are also technologies that plasticize a hard cured material by thermoplastic processing (without any chemical changes) and then inject it into a mold. The purpose of this study was to analyze the existence of possible defects in several dental prostheses using a non invasive method, before their insertion in the mouth. Different dental prostheses, fabricated from various materials were investigated using en-face optical coherence tomography. In order to discover the defects, the scanning was made in three planes, obtaining images at different depths, from 0,01 μm to 2 mm. In several of the investigated prostheses we found defects which may cause their fracture. These defects are totally included in the prostheses material and can not be vizualised with other imagistic methods. In conclusion, en-face OCT is an important investigative tool for the dental practice.

Preservice Teachers' Views of Instructor Presence in Online Courses

ERIC Educational Resources Information Center

Hodges, Charles B.; Cowan, S. Forrest

2012-01-01

The researchers conducted this study to investigate undergraduate preservice teacher candidates' perceptions regarding variables related to instructor presence in online courses. Participants included 52 undergraduate education students enrolled in 100% online technology integration courses at a doctoral research university in the southeastern…

IP Sample Plan #1 | NCI Technology Transfer Center | TTC

Cancer.gov

Sample letter that shows how Universities including co-investigators, consultants, and collaborators can describe a data and research tool sharing plan and procedures for exercising intellectual property rights. The letter is to be used as part of the University's application. 

University Students' Value Priorities and Emotional Empathy.

ERIC Educational Resources Information Center

Myyry, Liisa; Helkama, Klaus

2001-01-01

Presents a comparison of the Schwartz typology of values and the Spranger-Allport-Vernon typology. Investigates the differences among students in business, social science, and technology in emotional empathy and the relationships of value priorities and emotional empathy in different fields. Includes references. (CMK)

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2010 CFR

2010-01-01

... industry affected, including pertinent information regarding companies and their plants, locations... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of...

"Hedge Your Bets": Technology's Role in Young Gay Men's Relationship Challenges.

PubMed

McKie, Raymond M; Milhausen, Robin R; Lachowsky, Nathan J

2017-01-01

Technology is playing an increasingly pervasive role among young gay men in the process of meeting potential romantic or sexual partners. We investigated challenges posed by technology related to young gay men's relationships. Focus groups (n = 9) of young gay men aged 18-24 (n = 43) were transcribed verbatim, and thematic analysis was used to identify two major themes regarding challenges to relationship development and maintenance. Subthemes include unrealistic expectations of relationships, inauthentic self-presentation online, sexual primacy over romance, increased opportunities for infidelity, and jealousy. The implications of this study for sexual education and sexual health promotion are discussed.

Advanced space program studies. Overall executive summary

NASA Technical Reports Server (NTRS)

Wolfe, M. G.

1977-01-01

NASA and DoD requirements and planning data were used in multidiscipline advanced planning investigations of space operations and associated elements (including man), identification of potential low cost approaches, vehicle design, cost synthesis techniques, technology forecasting and opportunities for DoD technology transfer, and the development near-, mid-, and far-term space initiatives and development plans with emphasis on domestic and military commonality. An overview of objectives and results are presented for the following studies: advanced space planning and conceptual analysis, shuttle users, technology assessment and new opportunities, standardization and program practice, integrated STS operations planning, solid spinning upper stage, and integrated planning support functions.

Technology base for microgravity horticulture

NASA Technical Reports Server (NTRS)

Sauer, R. L.; Magnuson, J. W.; Scruby, R. R.; Scheld, H. W.

1987-01-01

Advanced microgravity plant biology research and life support system development for the spacecraft environment are critically hampered by the lack of a technology base. This inadequacy stems primarily from the fact that microgravity results in a lack of convective currents and phase separation as compared to the one gravity environment. A program plan is being initiated to develop this technology base. This program will provide an iterative flight development effort that will be closely integrated with both basic science investigations and advanced life support system development efforts incorporating biological processes. The critical considerations include optimum illumination methods, root aeration, root and shoot support, and heat rejection and gas exchange in the plant canopy.

An Empirical Analysis of Citizens' Acceptance Decisions of Electronic-Government Services: A Modification of the Unified Theory of Acceptance and Use of Technology (UTAUT) Model to Include Trust as a Basis for Investigation

ERIC Educational Resources Information Center

Awuah, Lawrence J.

2012-01-01

Understanding citizens' adoption of electronic-government (e-government) is an important topic, as the use of e-government has become an integral part of governance. Success of such initiatives depends largely on the efficient use of e-government services. The unified theory of acceptance and use of technology (UTAUT) model has provided a…

Technologies for Arsenic Removal from Water: Current Status and Future Perspectives

PubMed Central

Nicomel, Nina Ricci; Leus, Karen; Folens, Karel; Van Der Voort, Pascal; Du Laing, Gijs

2015-01-01

This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested. PMID:26703687

Technologies for Arsenic Removal from Water: Current Status and Future Perspectives.

PubMed

Nicomel, Nina Ricci; Leus, Karen; Folens, Karel; Van Der Voort, Pascal; Du Laing, Gijs

2015-12-22

This review paper presents an overview of the available technologies used nowadays for the removal of arsenic species from water. Conventionally applied techniques to remove arsenic species include oxidation, coagulation-flocculation, and membrane techniques. Besides, progress has recently been made on the utility of various nanoparticles for the remediation of contaminated water. A critical analysis of the most widely investigated nanoparticles is presented and promising future research on novel porous materials, such as metal organic frameworks, is suggested.

Study of advanced techniques for determining the long-term performance of components

NASA Technical Reports Server (NTRS)

1972-01-01

A study was conducted of techniques having the capability of determining the performance and reliability of components for spacecraft liquid propulsion applications for long term missions. The study utilized two major approaches; improvement in the existing technology, and the evolution of new technology. The criteria established and methods evolved are applicable to valve components. Primary emphasis was placed on the propellants oxygen difluoride and diborane combination. The investigation included analysis, fabrication, and tests of experimental equipment to provide data and performance criteria.

Space Applications of Automation, Robotics and Machine Intelligence Systems (ARAMIS), phase 2. Volume 1: Telepresence technology base development

NASA Technical Reports Server (NTRS)

Akin, D. L.; Minsky, M. L.; Thiel, E. D.; Kurtzman, C. R.

1983-01-01

The field of telepresence is defined, and overviews of those capabilities that are now available, and those that will be required to support a NASA telepresence effort are provided. Investigation of NASA's plans and goals with regard to telepresence, extensive literature search for materials relating to relevant technologies, a description of these technologies and their state of the art, and projections for advances in these technologies over the next decade are included. Several space projects are examined in detail to determine what capabilities are required of a telepresence system in order to accomplish various tasks, such as servicing and assembly. The key operational and technological areas are identified, conclusions and recommendations are made for further research, and an example developmental program is presented, leading to an operational telepresence servicer.

An overview of NASA research on positive displacement general-aviation engines

NASA Technical Reports Server (NTRS)

Kempke, E. E., Jr.

1980-01-01

The research and technology program related to improved and advanced general aviation engines is described. Current research is directed at the near-term improvement of conventional air-cooled spark-ignition piston engines and at future alternative engine systems based on all-new spark-ignition piston engines, lightweight diesels, and rotary combustion engines that show potential for meeting program goals in the midterm and long-term future. The conventional piston engine activities involve efforts on applying existing technology to improve fuel economy, investigation of key processes to permit leaner operation and reduce drag, and the development of cost effective technology to permit flight at high-altitudes where fuel economy and safety are improved. The advanced engine concepts activities include engine conceptual design studies and enabling technology efforts on the critical or key technology items.

Recent advances in bioprinting techniques: approaches, applications and future prospects.

PubMed

Li, Jipeng; Chen, Mingjiao; Fan, Xianqun; Zhou, Huifang

2016-09-20

Bioprinting technology shows potential in tissue engineering for the fabrication of scaffolds, cells, tissues and organs reproducibly and with high accuracy. Bioprinting technologies are mainly divided into three categories, inkjet-based bioprinting, pressure-assisted bioprinting and laser-assisted bioprinting, based on their underlying printing principles. These various printing technologies have their advantages and limitations. Bioprinting utilizes biomaterials, cells or cell factors as a "bioink" to fabricate prospective tissue structures. Biomaterial parameters such as biocompatibility, cell viability and the cellular microenvironment strongly influence the printed product. Various printing technologies have been investigated, and great progress has been made in printing various types of tissue, including vasculature, heart, bone, cartilage, skin and liver. This review introduces basic principles and key aspects of some frequently used printing technologies. We focus on recent advances in three-dimensional printing applications, current challenges and future directions.

Functional and technological properties of camel milk proteins: a review.

PubMed

Hailu, Yonas; Hansen, Egon Bech; Seifu, Eyassu; Eshetu, Mitiku; Ipsen, Richard; Kappeler, Stefan

2016-11-01

This review summarises current knowledge on camel milk proteins, with focus on significant peculiarities in protein composition and molecular properties. Camel milk is traditionally consumed as a fresh or naturally fermented product. Within the last couple of years, an increasing quantity is being processed in dairy plants, and a number of consumer products have been marketed. A better understanding of the technological and functional properties, as required for product improvement, has been gained in the past years. Absence of the whey protein β-LG and a low proportion of к-casein cause differences in relation to dairy processing. In addition to the technological properties, there are also implications for human nutrition and camel milk proteins are of interest for applications in infant foods, for food preservation and in functional foods. Proposed health benefits include inhibition of the angiotensin converting enzyme, antimicrobial and antioxidant properties as well as an antidiabetogenic effect. Detailed investigations on foaming, gelation and solubility as well as technological consequences of processing should be investigated further for the improvement of camel milk utilisation in the near future.

Performance characterization of structured light-based fingerprint scanner

NASA Astrophysics Data System (ADS)

Hassebrook, Laurence G.; Wang, Minghao; Daley, Raymond C.

2013-05-01

Our group believes that the evolution of fingerprint capture technology is in transition to include 3-D non-contact fingerprint capture. More specifically we believe that systems based on structured light illumination provide the highest level of depth measurement accuracy. However, for these new technologies to be fully accepted by the biometric community, they must be compliant with federal standards of performance. At present these standards do not exist for this new biometric technology. We propose and define a set of test procedures to be used to verify compliance with the Federal Bureau of Investigation's image quality specification for Personal Identity Verification single fingerprint capture devices. The proposed test procedures include: geometric accuracy, lateral resolution based on intensity or depth, gray level uniformity and flattened fingerprint image quality. Several 2-D contact analogies, performance tradeoffs and optimization dilemmas are evaluated and proposed solutions are presented.

Navigation and guidance requirements for commercial VTOL operations

NASA Technical Reports Server (NTRS)

Hoffman, W. C.; Hollister, W. M.; Howell, J. D.

1974-01-01

The NASA Langley Research Center (LaRC) has undertaken a research program to develop the navigation, guidance, control, and flight management technology base needed by Government and industry in establishing systems design concepts and operating procedures for VTOL short-haul transportation systems in the 1980s time period. The VALT (VTOL Automatic Landing Technology) Program encompasses the investigation of operating systems and piloting techniques associated with VTOL operations under all-weather conditions from downtown vertiports; the definition of terminal air traffic and airspace requirements; and the development of avionics including navigation, guidance, controls, and displays for automated takeoff, cruise, and landing operations. The program includes requirements analyses, design studies, systems development, ground simulation, and flight validation efforts.

Visible light laser voltage probing on thinned substrates

DOEpatents

Beutler, Joshua; Clement, John Joseph; Miller, Mary A.; Stevens, Jeffrey; Cole, Jr., Edward I.

2017-03-21

The various technologies presented herein relate to utilizing visible light in conjunction with a thinned structure to enable characterization of operation of one or more features included in an integrated circuit (IC). Short wavelength illumination (e.g., visible light) is applied to thinned samples (e.g., ultra-thinned samples) to achieve a spatial resolution for laser voltage probing (LVP) analysis to be performed on smaller technology node silicon-on-insulator (SOI) and bulk devices. Thinning of a semiconductor material included in the IC (e.g., backside material) can be controlled such that the thinned semiconductor material has sufficient thickness to enable operation of one or more features comprising the IC during LVP investigation.

Design Constraints Regarding The Use Of Fluids In Emergency Medical Systems For Space Flight

NASA Technical Reports Server (NTRS)

McQuillen, John

2013-01-01

The Exploration Medical Capability Project of the Human Research Program is tasked with identifying, investigating and addressing gaps existing gaps in either knowledge or technology that need to be addressed in order to enable safer exploration missions. There are several gaps that involve treatment for emergency medical situations. Some of these treatments involve the handling of liquids in the spacecraft environment which involve gas-liquid mixtures handling, dissolution chemistry and thermal issues. Some of the recent technology efforts include the Intravenous fluid generation (IVGEN) experiment, the In-Suit Injection System (ISIS) experiment, and medical suction. Constraints include limited volume, shelf life, handling biohazards, availability of power, crew time and medical training.

Microgravity Science and Applications. Program Tasks and Bibliography for FY 1993

NASA Technical Reports Server (NTRS)

1994-01-01

An annual report published by the Microgravity Science and Applications Division (MSAD) of NASA is presented. It represents a compilation of the Division's currently-funded ground, flight and Advanced Technology Development tasks. An overview and progress report for these tasks, including progress reports by principal investigators selected from the academic, industry and government communities, are provided. The document includes a listing of new bibliographic data provided by the principal investigators to reflect the dissemination of research data during FY 1993 via publications and presentations. The document also includes division research metrics and an index of the funded investigators. The document contains three sections and three appendices: Section 1 includes an introduction and metrics data, Section 2 is a compilation of the task reports in an order representative of its ground, flight or ATD status and the science discipline it represents, and Section 3 is the bibliography. The three appendices, in the order of presentation, are: Appendix A - a microgravity science acronym list, Appendix B - a list of guest investigators associated with a biotechnology task, and Appendix C - an index of the currently funded principal investigators.

Ageing-in-place with the use of ambient intelligence technology: perspectives of older users.

PubMed

van Hoof, J; Kort, H S M; Rutten, P G S; Duijnstee, M S H

2011-05-01

Ambient intelligence technologies are a means to support ageing-in-place by monitoring clients in the home. In this study, monitoring is applied for the purpose of raising an alarm in an emergency situation, and thereby, providing an increased sense of safety and security. Apart from these technological solutions, there are numerous environmental interventions in the home environment that can support people to age-in-place. The aim of this study was to investigate the needs and motives, related to ageing-in-place, of the respondents receiving ambient intelligence technologies, and to investigate whether, and how, these technologies contributed to aspects of ageing-in-place. This paper presents the results of a qualitative study comprised of interviews and observations of technology and environmental interventions in the home environment among 18 community-dwelling older adults with a complex demand for care. These respondents had a prototype of the Unattended Autonomous Surveillance system, an example of ambient intelligence technology, installed in their homes as a means to age-in-place. The UAS-system offers a large range of functionalities, including mobility monitoring, voice response, fire detection, as well as wandering detection and prevention, which can be installed in different configurations. The respondents had various motives to use ambient intelligence technologies to support ageing-in-place. The most prominent reason was to improve the sense of safety and security, in particular, in case of fall incidents, when people were afraid not to be able to use their existing emergency response systems. The ambient intelligence technologies were initially seen as a welcome addition to strategies already adopted by the respondents, including a variety of home modifications and assistive devices. The systems tested increased the sense of safety and security and helped to postpone institutionalisation. Respondents came up with a set of specifications in terms of the operation and the design of the technology. False alarms were also regarded as a sign that the ambient intelligence technology is functioning. Moreover, a good integration of the new technologies in the provision of health care is indispensable, and installation should be done in an acceptable and unobtrusive manner. Ambient intelligence technologies can contribute to an increased safety and security at home. The technologies alone offer no all encompassing solution as home care and additional environmental interventions are still needed to support ageing-in-place. Results of the study are used to further improve the ambient intelligence technologies and their implementation. 2011 Elsevier Ireland Ltd. All rights reserved.

Thermal Skin fabrication technology

NASA Technical Reports Server (NTRS)

Milam, T. B.

1972-01-01

Advanced fabrication techniques applicable to Thermal Skin structures were investigated, including: (1) chemical machining; (2) braze bonding; (3) diffusion bonding; and (4) electron beam welding. Materials investigated were nickel and nickel alloys. Sample Thermal Skin panels were manufactured using the advanced fabrication techniques studied and were structurally tested. Results of the program included: (1) development of improved chemical machining processes for nickel and several nickel alloys; (2) identification of design geometry limits; (3) identification of diffusion bonding requirements; (4) development of a unique diffusion bonding tool; (5) identification of electron beam welding limits; and (6) identification of structural properties of Thermal Skin material.

Recent Progress in Heliogyro Solar Sail Structural Dynamics

NASA Technical Reports Server (NTRS)

Wilkie, William K.; Warren, Jerry E.; Horta, Lucas G.; Juang, Jer-Nan; Gibbs, Samuel C.; Dowell, E.; Guerrant, Daniel; Lawrence Dale

2014-01-01

Results from recent National Aeronautics and Space Administration (NASA) research on the structural dynamics and control characteristics of heliogyro solar sails are summarized. Specific areas under investigation include coupled nonlinear finite element analysis of heliogyro membrane blade with solar radiation pressure effects, system identification of spinning membrane structures, solarelastic stability analysis of heliogyro solar sails, including stability during blade deployment, and results from small-scale in vacuo dynamics experiments with spinning high-aspect ratio membranes. A low-cost, rideshare payload heliogyro technology demonstration mission concept, used as a mission context for these heliogyro structural dynamics and solarelasticity investigations, is also described.

Air-climate-energy investigations with a state-level Integrated Assessment Model: GCAM-USA

EPA Science Inventory

The Global Change Assessment Model (GCAM) is a global integrated assessment model used for exploring future scenarios and examining strategies that address air pollution, climate change, and energy goals.  GCAM includes technology-rich representations of the energy, transportatio...

Ongoing data reduction, theoretical studies

NASA Technical Reports Server (NTRS)

Scarf, F. L.; Greenstadt, F. W.

1978-01-01

A nonspecific review of theory, correlative date analysis and supporting research and technology is presented. Title pages in some of the following areas are included: (1) magnetosphere boundary observations; (2) venus ionosphere and solar wind interaction; (3) ISEE-C plasma wave investigation, and (4) solar system plasmas.

Methods of Labor Economy Increasing in Educational Organization

ERIC Educational Resources Information Center

Dorozhkin, Evgenij M.; Krotov, Yakov E.; Tkacheva, Oksana N.; Kruchkov, Konstantin V.; Korotaev, Ivan S.

2016-01-01

The urgency of problem under investigation due to fact that increasing demand of the information technology infrastructure development in current conditions of educational institutions functioning, including formation of the information-educational environment point of view. Offered organizational and economic model of constructing processes for…

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2012 CFR

2012-01-01

... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of... national security, and shall contain the following information to the fullest extent possible: (1... industry affected, including pertinent information regarding companies and their plants, locations...

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2013 CFR

2013-01-01

... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of... national security, and shall contain the following information to the fullest extent possible: (1... industry affected, including pertinent information regarding companies and their plants, locations...

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2011 CFR

2011-01-01

... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of... national security, and shall contain the following information to the fullest extent possible: (1... industry affected, including pertinent information regarding companies and their plants, locations...

15 CFR 705.5 - Request or application for an investigation.

Code of Federal Regulations, 2014 CFR

2014-01-01

... shall be filed with the Director, Office of Technology Evaluation, Room H-1093, U.S. Department of... national security, and shall contain the following information to the fullest extent possible: (1... industry affected, including pertinent information regarding companies and their plants, locations...

Applying deep learning technology to automatically identify metaphase chromosomes using scanning microscopic images: an initial investigation

NASA Astrophysics Data System (ADS)

Qiu, Yuchen; Lu, Xianglan; Yan, Shiju; Tan, Maxine; Cheng, Samuel; Li, Shibo; Liu, Hong; Zheng, Bin

2016-03-01

Automated high throughput scanning microscopy is a fast developing screening technology used in cytogenetic laboratories for the diagnosis of leukemia or other genetic diseases. However, one of the major challenges of using this new technology is how to efficiently detect the analyzable metaphase chromosomes during the scanning process. The purpose of this investigation is to develop a computer aided detection (CAD) scheme based on deep learning technology, which can identify the metaphase chromosomes with high accuracy. The CAD scheme includes an eight layer neural network. The first six layers compose of an automatic feature extraction module, which has an architecture of three convolution-max-pooling layer pairs. The 1st, 2nd and 3rd pair contains 30, 20, 20 feature maps, respectively. The seventh and eighth layers compose of a multiple layer perception (MLP) based classifier, which is used to identify the analyzable metaphase chromosomes. The performance of new CAD scheme was assessed by receiver operation characteristic (ROC) method. A number of 150 regions of interest (ROIs) were selected to test the performance of our new CAD scheme. Each ROI contains either interphase cell or metaphase chromosomes. The results indicate that new scheme is able to achieve an area under the ROC curve (AUC) of 0.886+/-0.043. This investigation demonstrates that applying a deep learning technique may enable to significantly improve the accuracy of the metaphase chromosome detection using a scanning microscopic imaging technology in the future.

Integration of Laser Scanning and Three-dimensional Models in the Legal Process Following an Industrial Accident.

PubMed

Eyre, Matthew; Foster, Patrick; Speake, Georgina; Coggan, John

2017-09-01

In order to obtain a deeper understanding of an incident, it needs to be investigated to "peel back the layers" and examine both immediate and underlying failures that contributed to the event itself. One of the key elements of an effective accident investigation is recording the scene for future reference. In recent years, however, there have been major advances in survey technology, which have provided the ability to capture scenes in three dimension to an unprecedented level of detail, using laser scanners. A case study involving a fatal incident was surveyed using three-dimensional laser scanning, and subsequently recreated through virtual and physical models. The created models were then utilized in both accident investigation and legal process, to explore the technologies used in this setting. Benefits include explanation of the event and environment, incident reconstruction, preservation of evidence, reducing the need for site visits, and testing of theories. Drawbacks include limited technology within courtrooms, confusion caused by models, cost, and personal interpretation and acceptance in the data. Laser scanning surveys can be of considerable use in jury trials, for example, in case the location supports the use of a high-definition survey, or an object has to be altered after the accident and it has a specific influence on the case and needs to be recorded. However, consideration has to be made in its application and to ensure a fair trial, with emphasis being placed on the facts of the case and personal interpretation controlled.

Converting lignocellulosic solid waste into ethanol for the State of Washington: an investigation of treatment technologies and environmental impacts.

PubMed

Schmitt, Elliott; Bura, Renata; Gustafson, Rick; Cooper, Joyce; Vajzovic, Azra

2012-01-01

There is little research literature on the conversion of lignocellulosic rich waste streams to ethanol, and even fewer have investigated both the technical aspects and environmental impacts together. This study assessed technical and environmental challenges of converting three lignocellulosic waste streams to ethanol: municipal solid waste (MSW), low grade mixed waste paper (MWP), and organic yard waste (YW). Experimental results showed high conversion yields for all three streams using suitable conversion methods. Environmental impacts are highly dependent on conversion technology, and process conditions used. Life cycle assessment results showed that both chemicals production and waste collection are important factors to be included within a waste-to-ethanol study. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

Technology, design and dementia: an exploratory survey of developers.

PubMed

Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

2017-08-01

Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

Genetic strategies to investigate neuronal circuit properties using stem cell-derived neurons

PubMed Central

Garcia, Isabella; Kim, Cynthia; Arenkiel, Benjamin R.

2012-01-01

The mammalian brain is anatomically and functionally complex, and prone to diverse forms of injury and neuropathology. Scientists have long strived to develop cell replacement therapies to repair damaged and diseased nervous tissue. However, this goal has remained unrealized for various reasons, including nascent knowledge of neuronal development, the inability to track and manipulate transplanted cells within complex neuronal networks, and host graft rejection. Recent advances in embryonic stem cell (ESC) and induced pluripotent stem cell (iPSC) technology, alongside novel genetic strategies to mark and manipulate stem cell-derived neurons, now provide unprecedented opportunities to investigate complex neuronal circuits in both healthy and diseased brains. Here, we review current technologies aimed at generating and manipulating neurons derived from ESCs and iPSCs toward investigation and manipulation of complex neuronal circuits, ultimately leading to the design and development of novel cell-based therapeutic approaches. PMID:23264761

Special investigative actions in the criminal procedural law of Bosnia and Herzegovina, and their purposefulness in law

NASA Astrophysics Data System (ADS)

Rodic, V.

2017-05-01

Special investigative actions are a novelty in the criminal procedure legislation BiH. In our legislation this has been introduced only in 2003. These are actions that need to assist prosecutors to effectively reveal the perpetrators and the evidence of serious and complex crimes, especially organized crime. There are criminal offenses in whose execution included a larger number of people in different locations and which are carried out with the help of new communication technologies, so that it is not possible to prove the classic means of evidence (documents, physical evidence, witnesses). Unfortunately, criminals are often better organized than the state and in their criminal activities are introduced various technological developments. Therefore, the legislator extended the powers of the prosecutor and gave them into the hands of more effective mechanisms for discovering the perpetrators of these crimes. Special investigative measures are listed in the Penal Code.

High Reynolds number tests of a Boeing BAC I airfoil in the Langley 0.3-meter transonic cryogenic tunnel

NASA Technical Reports Server (NTRS)

Johnson, W. G., Jr.; Hill, A. S.; Ray, E. J.; Rozendaal, R. A.; Butler, T. W.

1982-01-01

A wind tunnel investigation of an advanced-technology airfoil was conducted in the Langley 0.3-Meter Transonic Cryogenic Tunnel (TCT). This investigation represents the first in a series of NASA/U.X. industry two dimensional airfoil studies to be completed in the Advanced Technology Airfoil Test program. Test temperature was varied from ambient to about 100 K at pressures ranging from about 1.2 to 6.0 atm. Mach number was varied from about 0.40 to 0.80. These variables provided a Reynolds number (based on airfoil chord) range from about .0000044 to .00005. This investigation was specifically designed to: (1) test a Boeing advanced airfoil from low to flight-equivalent Reynolds numbers; (2) provide the industry participant (Boeing) with experience in cryogenic wind-tunnel model design and testing techniques; and (3) demonstrate the suitability of the 0.3-m TCT as an airfoil test facility. All the objectives of the cooperative test were met. Data are included which demonstrate the effects of fixed transition, Mach number, and Reynolds number on the aerodynamic characteristics of the airfoil. Also included are remarks on the model design, the model structural integrity, and the overall test experience.

Multidimensional protein identification technology (MudPIT): technical overview of a profiling method optimized for the comprehensive proteomic investigation of normal and diseased heart tissue.

PubMed

Kislinger, Thomas; Gramolini, Anthony O; MacLennan, David H; Emili, Andrew

2005-08-01

An optimized analytical expression profiling strategy based on gel-free multidimensional protein identification technology (MudPIT) is reported for the systematic investigation of biochemical (mal)-adaptations associated with healthy and diseased heart tissue. Enhanced shotgun proteomic detection coverage and improved biological inference is achieved by pre-fractionation of excised mouse cardiac muscle into subcellular components, with each organellar fraction investigated exhaustively using multiple repeat MudPIT analyses. Functional-enrichment, high-confidence identification, and relative quantification of hundreds of organelle- and tissue-specific proteins are achieved readily, including detection of low abundance transcriptional regulators, signaling factors, and proteins linked to cardiac disease. Important technical issues relating to data validation, including minimization of artifacts stemming from biased under-sampling and spurious false discovery, together with suggestions for further fine-tuning of sample preparation, are discussed. A framework for follow-up bioinformatic examination, pattern recognition, and data mining is also presented in the context of a stringent application of MudPIT for probing fundamental aspects of heart muscle physiology as well as the discovery of perturbations associated with heart failure.

Introducing technology education to young children: A design, make and appraise approach

NASA Astrophysics Data System (ADS)

Fleer, Marilyn

1992-12-01

The National Statement on Technology Education will soon be released in Australia. The statement advocates a design, make and appraise approach to technology education. The document includes Year One children and provides exemplars of curriculum activities for early childhood children. Although much curriculum development in technology education for primary and early childhood has taken place in the UK, little research has been conducted within the early childhood area in Australia. This paper describes a study which sought to investigate how the design, make and appraise approach could be implemented within early childhood using existing materials, procedures and teaching programmes. In particular, the pre-school programme was considered to see if the approach was suitable for young children, and if girls could be encouraged into this newly defined area of study.

Space applications of Automation, Robotics And Machine Intelligence Systems (ARAMIS). Volume 3, phase 2: Executive summary

NASA Technical Reports Server (NTRS)

Akin, D. L.; Minsky, M. L.; Thiel, E. D.; Kurtzman, C. R.

1983-01-01

The field of telepresence is defined, and overviews of those capabilities that are now available, and those that will be required to support a NASA telepresence effort are provided. Investigation of NASA's plans and goals with regard to telepresence, extensive literature search for materials relating to relevant technologies, a description of these technologies and their state of the art, and projections for advances in these technologies are included. Several space projects are examined in detail to determine what capabilities are required of a telepresence system in order to accomplish various tasks, such as servicing and assembly. The key operational and technological areas are identified, conclusions and recommendations are made for further research, and an example developmental program leading to an operational telepresence servicer is presented.

Recent results from advanced research on space solar cells at NASA

NASA Technical Reports Server (NTRS)

Flood, Dennis J.

1990-01-01

The NASA program in space photovoltaic research and development encompasses a wide range of emerging options for future space power systems, and includes both cell and array technology development. The long range goals are to develop technology capable of achieving 300 W/kg for planar arrays, and 300 W/sq m for concentrator arrays. InP and GaAs planar and concentrator cell technologies are under investigation for their potential high efficiency and good radiation resistance. The Advanced Photovoltaic Solar Array (APSA) program is a near term effort aimed at demonstrating 130 W/kg beginning of life specific power using thin (62 pm) silicon cells. It is intended to be technology transparent to future high efficiency cells and provides the baseline for development of the 300 W/kg array.

Current applications of molecular imaging and luminescence-based techniques in traditional Chinese medicine.

PubMed

Li, Jinhui; Wan, Haitong; Zhang, Hong; Tian, Mei

2011-09-01

Traditional Chinese medicine (TCM), which is fundamentally different from Western medicine, has been widely investigated using various approaches. Cellular- or molecular-based imaging has been used to investigate and illuminate the various challenges identified and progress made using therapeutic methods in TCM. Insight into the processes of TCM at the cellular and molecular changes and the ability to image these processes will enhance our understanding of various diseases of TCM and will provide new tools to diagnose and treat patients. Various TCM therapies including herbs and formulations, acupuncture and moxibustion, massage, Gua Sha, and diet therapy have been analyzed using positron emission tomography, single photon emission computed tomography, functional magnetic resonance imaging and ultrasound and optical imaging. These imaging tools have kept pace with developments in molecular biology, nuclear medicine, and computer technology. We provide an overview of recent developments in demystifying ancient knowledge - like the power of energy flow and blood flow meridians, and serial naturopathies - which are essential to visually and vividly recognize the body using modern technology. In TCM, treatment can be individualized in a holistic or systematic view that is consistent with molecular imaging technologies. Future studies might include using molecular imaging in conjunction with TCM to easily diagnose or monitor patients naturally and noninvasively. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

How-To-Do-It: Recombinant DNA Technology in the High School Biology Laboratory.

ERIC Educational Resources Information Center

Myers, Richard

1988-01-01

Describes a basic biotechnology investigation that includes restriction and ligation of plasmid DNA, transformation of bacteria and cloning of these bacterial cells. Discusses laboratory procedures and another activity in the identification of unknown plasmids by studying agarose gel electrophoresis photographs. (CW)

Using Earth Observation to Forecast Human and Animal Vector-Borne Disease Outbreaks

USDA-ARS?s Scientific Manuscript database

Earth observing technologies, including data from with earth-orbiting satellites, coupled with new investigations and a better understanding of the impact of environmental factors on transmission dynamics of mosquito-borne diseases permitted us to forecast Rift Valley fever (RVF) outbreaks in animal...

Pre-Service Teachers' Perceptions on Tpack Development after Designing Educational Games

ERIC Educational Resources Information Center

Sancar Tokmak, Hatice

2015-01-01

This qualitative case study aimed to investigate Early Childhood Education (ECE) pre-service teachers' perception of development in their technological, pedagogical, content knowledge (TPACK) after designing educational computer games for young children. Participants included 21 ECE pre-service teachers enrolled in the course Instructional…

IP Sample Plan #4 | NCI Technology Transfer Center | TTC

Cancer.gov

Sample letter from Research Institutes and their principal investigator and consultants, describing a data and research tool sharing plan and procedures for sharing data, research materials, and patent and licensing of intellectual property. This letter is designed to be included as part of an application.

Bridge-in-a-Backpack(TM). Task 1 : investigation of span lengths up to 70 feet.

DOT National Transportation Integrated Search

2011-08-01

The Bridge-in-a-Backpack has previously been demonstrated with short spans. The first : constructed one, Neal Bridge in Pittsfield, Maine had a span of 34 feet. This task includes : research and development that demonstrates the technology can be ...

Encouraging Balanced Scientific Research through Formal Debate

ERIC Educational Resources Information Center

Yurgelun, Nancy

2007-01-01

The new Connecticut science standards include a "Science, Technology, and Society" (STS) standard for each grade level. This standard encourages students to explore how scientific knowledge affects the quality of their lives. By relating science concepts to real-world decision making, STS investigations give students a framework through…

Cheating Behaviours, the Internet and Education Undergraduate Students

ERIC Educational Resources Information Center

Trushell, J.; Byrne, K.; Simpson, R.

2012-01-01

This paper describes an illuminative small-scale study that piloted an initial survey instrument intended to investigate correspondences between 47 undergraduate Education final year students' use of information and communications technology (ICT), including the Internet, and--within the context of their adoption of tactics intended to impress…

Promoting Creative Thinking through the Use of ICT.

ERIC Educational Resources Information Center

Wheeler, Steve; Waite, S. J.; Bromfield, C.

2002-01-01

Reports on a pilot study that investigated the creative impact of information and communication technology (ICT) in a grade 6 class in England. Presents a model of creativity that includes problem solving, creative cognition, and social interaction; and discusses the creation of personal Web pages. (Author/LRW)

Pharmaceutical experiment aboard STS-67 mission

NASA Technical Reports Server (NTRS)

1995-01-01

Astronaut William G. Gregory, pilot, works with a pharmaceutical experiment on the middeck of the Earth-orbiting Space Shuttle Endeavour during the STS-67 mission. Commercial Materials Dispersion Apparatus Instruments Technology Associates Experiments (CMIX-03) includes not only pharmaceutical, but also biotechnology, cell biology, fluids, and crystal growth investigation

Astronaut William Gregory works with pharmaceutical experiments on middeck

NASA Technical Reports Server (NTRS)

1995-01-01

Astronaut William G. Gregory, STS-67 pilot, works with a pharmaceutical experiment on the middeck of the Earth-orbiting Space Shuttle Endeavour. Commercial Materials Dispersion Apparatus Instruments Technology Associates Experiments (CMIX-03) includes not only pharmaceutical but also biotechnology, cell biology, fluids and crystal growth investigations.

Multiple Case Study of STEM in School-Based Agricultural Education

ERIC Educational Resources Information Center

Stubbs, Eric A.; Myers, Brian E.

2015-01-01

This multiple case study investigated the integration of science, technology, engineering, and mathematics (STEM) in three Florida high school agriculture programs. Observations, interviews, documents, and artifacts provided qualitative data that indicated the types of STEM knowledge taught. Variables of interest included student and teacher…

78 FR 66806 - Privacy Act of 1974

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-06

... efforts to expand its technology into the mobile and Web-based application domain as well as facilitate.... The data may be used for such purposes as scheduling patient treatment services, including nursing... health care profession, when requested in writing by an investigator or supervisory official of the...

Investigating Hypervigilance for Social Threat of Lonely Children

ERIC Educational Resources Information Center

Qualter, Pamela; Rotenberg, Ken; Barrett, Louise; Henzi, Peter; Barlow, Alexandra; Stylianou, Maria; Harris, Rebecca A.

2013-01-01

The hypothesis that lonely children show hypervigilance for social threat was examined in a series of three studies that employed different methods including advanced eye-tracking technology. Hypervigilance for social threat was operationalized as hostility to ambiguously motivated social exclusion in a variation of the hostile attribution…

Teacher Use of Evidence to Customize Inquiry Science Instruction

ERIC Educational Resources Information Center

Gerard, Libby F.; Spitulnik, Michele; Linn, Marcia C.

2010-01-01

This study investigated how professional development featuring evidence-based customization of technology-enhanced curriculum projects can improve inquiry science teaching and student knowledge integration in earth science. Participants included three middle school sixth-grade teachers and their classes of students (N = 787) for three consecutive…

[From insulin pump and continuous glucose monitoring to the artificial pancreas].

PubMed

Apablaza, Pamela; Soto, Néstor; Codner, Ethel

2017-05-01

Technology for diabetes care has undergone major development during recent decades. These technological advances include continuous subcutaneous insulin infusion (CSII), also known as insulin pumps, and real-time continuous glucose monitoring system (RT-CGMS). The integration of CSII and RT-CGMS into a single device has led to sensor-augmented pump therapy and more recently, a technology that has automated delivery of basal insulin therapy, known as hybrid system. These new technologies have led to benefits in attaining better metabolic control and decreasing the incidence of severe hypoglycemia, especially in patients with type 1 diabetes. This review describes the types of technologies currently available or under investigation for these purposes, their benefits and disadvantages, recommendations and the appropriate patient selection for their use. The clinical use of the hybrid system and artificial pancreas seem to be possible in the near future.

The social comfort of wearable technology and gestural interaction.

PubMed

Dunne, Lucy E; Profita, Halley; Zeagler, Clint; Clawson, James; Gilliland, Scott; Do, Ellen Yi-Luen; Budd, Jim

2014-01-01

The "wearability" of wearable technology addresses the factors that affect the degree of comfort the wearer experiences while wearing a device, including physical, psychological, and social aspects. While the physical and psychological aspects of wearing technology have been investigated since early in the development of the field of wearable computing, the social aspects of wearability have been less fully-explored. As wearable technology becomes increasingly common on the commercial market, social wearability is becoming an ever-more-important variable contributing to the success or failure of new products. Here we present an analysis of social aspects of wearability within the context of the greater understanding of wearability in wearable technology, and focus on selected theoretical frameworks for understanding how wearable products are perceived and evaluated in a social context. Qualitative results from a study of social acceptability of on-body interactions are presented as a case study of social wearability.

Beryllium processing technology review for applications in plasma-facing components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castro, R.G.; Jacobson, L.A.; Stanek, P.W.

1993-07-01

Materials research and development activities for the International Thermonuclear Experimental Reactor (ITER), i.e., the next generation fusion reactor, are investigating beryllium as the first-wall containment material for the reactor. Important in the selection of beryllium is the ability to process, fabricate and repair beryllium first-wall components using existing technologies. Two issues that will need to be addressed during the engineering design activity will be the bonding of beryllium tiles in high-heat-flux areas of the reactor, and the in situ repair of damaged beryllium tiles. The following review summarizes the current technology associated with welding and joining of beryllium to itselfmore » and other materials, and the state-of-the-art in plasma-spray technology as an in situ repair technique for damaged beryllium tiles. In addition, a review of the current status of beryllium technology in the former Soviet Union is also included.« less

Luminescence of Eu(3+) doped SiO2 Thin Films and Glass Prepared by Sol-gel Technology

NASA Technical Reports Server (NTRS)

Castro, Lymari; Jia, Weiyi; Wang, Yanyun; Santiago, Miguel; Liu, Huimin

1998-01-01

Trivalent europium ions are an important luminophore for lighting and display. The emission of (5)D0 to (7)F2 transition exhibits a red color at about 610 nm, which is very attractive and fulfills the requirement for most red-emitting phosphors including lamp and cathode ray phosphorescence materials. Various EU(3+) doped phosphors have been developed, and luminescence properties have been extensively studied. On the other hand, sol-gel technology has been well developed by chemists. In recent years, applications of this technology to optical materials have drawn a great attention. Sol-gel technology provides a unique way to obtain homogeneous composition distribution and uniform doping, and the processing temperature can be very low. In this work, EU(3+) doped SiO2 thin films and glasses were prepared by sol-gel technology and their spectroscopic properties were investigated.

The impact of technological intensity of service provision on physician expenditures: an exploratory investigation.

PubMed

Roham, Mehrdad; Gabrielyan, Anait R; Archer, Norman P; Grignon, Michel L; Spencer, Byron G

2014-10-01

Advances in technology and subsequent changes in clinical practice can lead to increases in healthcare costs. Our objective is to assess the impact that changes in the technological intensity of physician-provided health services have had on the age pattern of both the volume of services provided and the average expenditures associated with them. We based our analysis on age-sex-specific patient-level administrative records of diagnoses and treatments. These records include virtually all physician services provided in the province of Ontario, Canada in a 10-year span ending in 2004 and their associated costs. An algorithm is developed to classify services and their costs into three levels of technological intensity. We find that while the overall age-standardized level and cost of services per capita have decreased, the volume and cost of high technologically intensive treatments have increased, especially among older patients. Copyright © 2013 John Wiley & Sons, Ltd.

Investigation of lunar base thermal control system options

NASA Technical Reports Server (NTRS)

Ewart, Michael K.

1993-01-01

Long duration human exploration missions to the Moon will require active thermal control systems which have not previously been used in space. The two technologies which are most promising for long term lunar base thermal control are heat pumps and radiator shades. Recent trade-off studies at the Johnson Space Center have focused development efforts on the most promising heat pump and radiator shade technologies. Since these technologies are in the early stages of development and many parameters used in the study are not well defined, a parametric study was done to test the sensitivity to each assumption. The primary comparison factor in these studies was the total mass system, with power requirements included in the form of a mass penalty for power. Heat pump technologies considered were thermally driven heat pumps such as metal hydride, complex compound, absorption and zeolite. Also considered were electrically driven Stirling and vapor compression heat pumps. Radiator shade concepts considered included step shaped, V-shaped and parabolic (or catenary) shades and ground covers. A further trade study compared the masses of heat pump and radiator shade systems.

Nanofiltration technology in water treatment and reuse: applications and costs.

PubMed

Shahmansouri, Arash; Bellona, Christopher

2015-01-01

Nanofiltration (NF) is a relatively recent development in membrane technology with characteristics that fall between ultrafiltration and reverse osmosis (RO). While RO membranes dominate the seawater desalination industry, NF is employed in a variety of water and wastewater treatment and industrial applications for the selective removal of ions and organic substances, as well as certain niche seawater desalination applications. The purpose of this study was to review the application of NF membranes in the water and wastewater industry including water softening and color removal, industrial wastewater treatment, water reuse, and desalination. Basic economic analyses were also performed to compare the profitability of using NF membranes over alternative processes. Although any detailed cost estimation is hampered by some uncertainty (e.g. applicability of estimation methods to large-scale systems, labor costs in different areas of the world), NF was found to be a cost-effective technology for certain investigated applications. The selection of NF over other treatment technologies, however, is dependent on several factors including pretreatment requirements, influent water quality, treatment facility capacity, and treatment goals.

Teachers' Organization of Participation Structures for Teaching Science with Computer Technology

NASA Astrophysics Data System (ADS)

Subramaniam, Karthigeyan

2016-08-01

This paper describes a qualitative study that investigated the nature of the participation structures and how the participation structures were organized by four science teachers when they constructed and communicated science content in their classrooms with computer technology. Participation structures focus on the activity structures and processes in social settings like classrooms thereby providing glimpses into the complex dynamics of teacher-students interactions, configurations, and conventions during collective meaning making and knowledge creation. Data included observations, interviews, and focus group interviews. Analysis revealed that the dominant participation structure evident within participants' instruction with computer technology was ( Teacher) initiation-( Student and Teacher) response sequences-( Teacher) evaluate participation structure. Three key events characterized the how participants organized this participation structure in their classrooms: setting the stage for interactive instruction, the joint activity, and maintaining accountability. Implications include the following: (1) teacher educators need to tap into the knowledge base that underscores science teachers' learning to teach philosophies when computer technology is used in instruction. (2) Teacher educators need to emphasize the essential idea that learning and cognition is not situated within the computer technology but within the pedagogical practices, specifically the participation structures. (3) The pedagogical practices developed with the integration or with the use of computer technology underscored by the teachers' own knowledge of classroom contexts and curriculum needs to be the focus for how students learn science content with computer technology instead of just focusing on how computer technology solely supports students learning of science content.

Mass spectrometry in life science research.

PubMed

Lehr, Stefan; Markgraf, Daniel

2016-12-01

Investigating complex signatures of biomolecules by mass spectrometry approaches has become indispensable in molecular life science research. Nowadays, various mass spectrometry-based omics technologies are available to monitor qualitative and quantitative changes within hundreds or thousands of biological active components, including proteins/peptides, lipids and metabolites. These comprehensive investigations have the potential to decipher the pathophysiology of disease development at a molecular level and to monitor the individual response of pharmacological treatment or lifestyle intervention.

New Advanced Technologies in Stem Cell Therapy

DTIC Science & Technology

2012-09-01

directions for this project include investigating modulation of the IKK/NF-kB pathway as a means to rejuvenate the phenotype of aged muscle stem and...Reference 1. Conboy IM, Conboy MJ, Wagers AJ, Girma ER, Weissman IL, Rando TA. Rejuvenation of aged progenitor cells by exposure to a young...the influence that age plays on the regeneration capacity of the cells. Study Design: We will investigate the effects of cell survival, proliferation

Proceedings of the Workshop on an Electromagnetic Positioning System in Space

NASA Technical Reports Server (NTRS)

Oran, W. A. (Editor)

1978-01-01

A workshop was convened to help determine if sufficient justification existed to proceed with the design of an electromagnetic (EM) positioning device for use in space. Those in attendance included experts in crystal growth, nucleation phenomena, containerless processing techniques, properties of materials, metallurgical techniques, and glass technology. Specific areas mentioned included the study of metallic glasses and investigations of the properties of high temperature materials.

Investigation of Basic Mechanisms of Radiation Effects in Carbon-Based Electronic Materials

DTIC Science & Technology

2017-06-01

materials characterization, and carbon nanotube diodes, FET, and PZT-memory test device structures for electrical measurements. Pre - and post -irradiation...definition (Radiation exposure) Task 2) The grantee shall perform testing to include: - Radiation testing . May be multiple types. - Pre and post -rad...technologies for electronic devices. Experiential radiation testing has included exposure to 10 keV X-rays, 4 MeV protons, heavy ions, and Ultra

2001 NASA Seal/secondary Air System Workshop, Volume 1. Volume 1

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

2002-01-01

The 2001 NASA Seal/Secondary Air System Workshop covered the following topics: (i) overview of NASA's Vision for 21st Century Aircraft; (ii) overview of NASA-sponsored Ultra-Efficient Engine Technology (UEET); (iii) reviews of sealing concepts, test results, experimental facilities, and numerical predictions; and (iv) reviews of material development programs relevant to advanced seals development. The NASA UEET overview illustrates for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. The NASA UEET program goals include an 8-to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to investigate advanced reusable space vehicle technologies (X-38) and advanced space ram/scramjet propulsion systems. Seal challenges posed by these advanced systems include high-temperature operation, resiliency at the operating temperature to accommodate sidewall flexing, and durability to last many missions.

Evaluation of cell lysis procedures and use of a micro fluidic system for an automated DNA-based cell identification in interplanetary missions

NASA Astrophysics Data System (ADS)

Hall, J. A.; Felnagle, E.; Fries, M.; Spearing, S.; Monaco, L.; Steele, A.

2006-12-01

A Modular Assay System for Solar System Exploration (MASSE) is being developed to include sample handling, pre-treatment, separation and analysis of biological target compounds by both DNA and protein microarrays. To better design sensitive and accurate initial upstream sample handling of the MASSE instrument, experiments investigating the sensitivity and potential extraction bias of commercially available DNA extraction kits between classes of environmentally relevant prokaryotes such as gram-negative bacteria ( Escherichia coli), gram-positive bacteria ( Bacillus megatarium), and Archaea ( Haloarcula marismortui) were performed. For extractions of both planktonic cultures and spiked Mars simulated regolith, FTA ® paper demonstrated the highest sensitivity, with detection as low as ˜1×10 1 cells and ˜3.3×10 2 cells, respectively. In addition to the highest sensitivity, custom modified application of FTA ® paper extraction protocol is the simplest in terms of incorporation into MASSE and displayed little bias in sensitivity with respect to prokaryotic cell type. The implementation of FTA paper for environmental microbiology investigations appears to be a viable and effective option potentially negating the need for other pre-concentration steps such as filtration and negating concerns regarding extraction efficiency of cells. In addition to investigations on useful technology for upstream sample handling in MASSE, we have also evaluated the potential for μTAS to be employed in the MASSE instrument by employing proprietary lab-on-a-chip development technology to investigate the potential for microfluidic cell lysis of different prokaryotic cells employing both chemical and biological lysis agents. Real-time bright-field microscopy and quantitative PMT detection indicated that that gram positive, gram negative and archaeal cells were effectively lyzed in a few seconds using the microfluidic chip protocol developed. This included employing a lysis buffer with components including lysozyme, Protease, Proteinase K, Tween-20 and TritonX-100. The effectiveness of antibiotics and other chemical lysis agents were also screened and demonstrated partial effectiveness on all three cell types. This work demonstrates a step wise approach to evaluating the efficacy and sensitivity of commercial macro-scale technology and state-of-the-art developmental microfluidic technology under consideration for incorporation into the remotely operated MASSE instrument currently under development at the Carnegie Institution of Washington.

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK

PubMed Central

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E. S.; Adcock, Mike; Gregory-Smith, Diana

2013-01-01

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics. PMID:24427512

An investigation of the early factors which influence women's career choices in physical science and technology

NASA Astrophysics Data System (ADS)

Payne, Anneliese

The composition of the workforce has begun to undergo a change. The U.S. Department of Labor estimates that women, minorities, and immigrants will constitute 80 percent of the additions to the labor force between 1987 and the year 2000 (Oakes, 1990). The National Science Foundation projects that the United States may have a shortfall of 400,000 scientists and over 250,000 engineers by the year 2006 (Argonne, 1990). Since women are among those who are significantly underrepresented among individuals preparing for a career in science, thirty women who are currently pursuing a successful career in physical science and technology were interviewed. This study determined participants' perceptions of the factors that first influenced an early interest in physical science and technology. The investigation included perceptions regarding: (1) whether certain identifiable events or experiences influenced the decision to pursue science as a career and what those events and experiences were; (2) at what age these events occurred; (3) whether an adult(s) was influential and which adult(s) it was; and (4) identification of where these events and experiences occurred. The interview technique was selected as the best research method for collecting the qualitative and demographic data needed for this study. The results represent the participants' recollections of out-of-school and in-school activities, family, friends and teacher support, self-image during the formative years, parents as the most important factor which influenced an interest in physical science, and major obstacles that had to be overcome by the participants in order to pursue successful careers in physical science and technology. Also included is participants' advice to parents and teachers who want to encourage females to pursue a career in physical science and technology.

Basalt: Biologic Analog Science Associated with Lava Terrains

NASA Astrophysics Data System (ADS)

Lim, D. S. S.; Abercromby, A.; Kobs-Nawotniak, S. E.; Kobayashi, L.; Hughes, S. S.; Chappell, S.; Bramall, N. E.; Deans, M. C.; Heldmann, J. L.; Downs, M.; Cockell, C. S.; Stevens, A. H.; Caldwell, B.; Hoffman, J.; Vadhavk, N.; Marquez, J.; Miller, M.; Squyres, S. W.; Lees, D. S.; Fong, T.; Cohen, T.; Smith, T.; Lee, G.; Frank, J.; Colaprete, A.

2015-12-01

This presentation will provide an overview of the BASALT (Biologic Analog Science Associated with Lava Terrains) program. BASALT research addresses Science, Science Operations, and Technology. Specifically, BASALT is focused on the investigation of terrestrial volcanic terrains and their habitability as analog environments for early and present-day Mars. Our scientific fieldwork is conducted under simulated Mars mission constraints to evaluate strategically selected concepts of operations (ConOps) and capabilities with respect to their anticipated value for the joint human and robotic exploration of Mars. a) Science: The BASALT science program is focused on understanding habitability conditions of early and present-day Mars in two relevant Mars-analog locations (the Southwest Rift Zone (SWRZ) and the East Rift Zone (ERZ) flows on the Big Island of Hawai'i and the eastern Snake River Plain (ESRP) in Idaho) to characterize and compare the physical and geochemical conditions of life in these environments and to learn how to seek, identify, and characterize life and life-related chemistry in basaltic environments representing these two epochs of martian history. b) Science Operations: The BASALT team will conduct real (non-simulated) biological and geological science at two high-fidelity Mars analogs, all within simulated Mars mission conditions (including communication latencies and bandwidth constraints) that are based on current architectural assumptions for Mars exploration missions. We will identify which human-robotic ConOps and supporting capabilities enable science return and discovery. c) Technology: BASALT will incorporate and evaluate technologies in to our field operations that are directly relevant to conducting the scientific investigations regarding life and life-related chemistry in Mars-analogous terrestrial environments. BASALT technologies include the use of mobile science platforms, extravehicular informatics, display technologies, communication & navigation packages, remote sensing, advanced science mission planning tools, and scientifically-relevant instrument packages to achieve the project goals.

Catalyst Development for Hydrogen Peroxide Rocket Engines

NASA Technical Reports Server (NTRS)

Morlan, P. W.; Wu, P.-K.; Ruttle, D. W.; Fuller, R. P.; Nejad, A. S.; Anderson, W. E.

1999-01-01

The development of various catalysts of hydrogen peroxide was conducted for the applications of liquid rocket engines. The catalyst development includes silver screen technology, solid catalyst technology, and homogeneous catalyst technology. The silver screen technology development was performed with 85% (by weight) hydrogen peroxide. The results of this investigation were used as the basis for the catalyst design of a pressure-fed liquid-fueled upper stage engine. Both silver-plated nickel 200 screens and pure silver screens were used as the active metal catalyst during the investigation, The data indicate that a high decomposition efficiency (greater than 90%) of 85% hydrogen peroxide can be achieved at a bed loading of 0.5 lbm/sq in/sec with both pure silver and silver plated screens. Samarium oxide coating, however, was found to retard the decomposition process and the catalyst bed was flooded at lower bed loading. A throughput of 200 lbm of hydrogen peroxide (1000 second run time) was tested to evaluate the catalyst aging issue and performance degradation was observed starting at approximately 400 seconds. Catalyst beds of 3.5 inch in diameter was fabricated using the same configuration for a 1,000-lbf rocket engine. High decomposition efficiency was obtained with a low pressure drop across the bed. Solid catalyst using precious metal was also developed for the decomposition of hydrogen peroxide from 85% to 98% by weight. Preliminary results show that the catalyst has a strong reactivity even after 15 minutes of peroxide decomposition. The development effort also includes the homogeneous catalyst technology. Various non-toxic catalysts were evaluated with 98% peroxide and hydrocarbon fuels. The results of open cup drop tests indicate an ignition delay around 11 ms.

An exploratory investigation of barriers and enablers affecting investment in renewable companies and technologies in the UK.

PubMed

Wells, Victoria; Greenwell, Felicity; Covey, Judith; Rosenthal, Harriet E S; Adcock, Mike; Gregory-Smith, Diana

2013-02-06

The last few years have seen considerable research expenditure on renewable fuel technologies. However, in many cases, the necessary sustained and long-term funding from the investment community has not been realized at a level needed to allow technologies to become reality. According to global consulting firm Deloitte's recent renewable energy report (http://www.deloitte.com/energypredictions2012), many renewable energy projects stalled or were not completed because of issues including the global economy, the state of government finances, difficulties in funding and regulatory uncertainty. This investigation concentrates on the funding aspect and explores the perceived barriers and enablers to renewable technologies within the investment and renewables community. Thematic analysis of 14 in-depth interviews with representatives from renewable energy producers, banks and investment companies identified key factors affecting the psychology of investor behaviour in renewables. Eight key issues are highlighted, including a range of barriers and enablers, the role of the government, balance between cost/risk, value/return on investment, investment time scales, personality/individual differences of investors and the level of innovation in the renewable technology. It was particularly notable that in the findings the role of the government was discussed more than other themes and generally in quite critical terms, highlighting the need to ensure consistency in government funding and policy and a greater understanding of how government decision-making happens. Specific findings such as these illustrate the value of crossing disciplinary boundaries and highlight potential further research. Behavioural science and economic psychology in particular have much to offer at the interface of other disciplines such as political science and financial economics.

An Open Source Simulation System

NASA Technical Reports Server (NTRS)

Slack, Thomas

2005-01-01

An investigation into the current state of the art of open source real time programming practices. This document includes what technologies are available, how easy is it to obtain, configure, and use them, and some performance measures done on the different systems. A matrix of vendors and their products is included as part of this investigation, but this is not an exhaustive list, and represents only a snapshot of time in a field that is changing rapidly. Specifically, there are three approaches investigated: 1. Completely open source on generic hardware, downloaded from the net. 2. Open source packaged by a vender and provided as free evaluation copy. 3. Proprietary hardware with pre-loaded proprietary source available software provided by the vender as for our evaluation.

Application of Technology of Hydrodynamic Cavitation Processing High-Viscosity Oils for the Purpose of Improving the Rheological Characteristics of Oils

NASA Astrophysics Data System (ADS)

Zemenkov, Y. D.; Zemenkova, M. Y.; Vengerov, A. A.; Brand, A. E.

2016-10-01

There is investigated the technology of hydrodynamic cavitational processing viscous and high-viscosity oils and the possibility of its application in the pipeline transport system for the purpose of increasing of rheological properties of the transported oils, including dynamic viscosity shear stress in the article. It is considered the possibility of application of the combined hydrodynamic cavitational processing with addition of depressor additive for identification of effect of a synergism. It is developed the laboratory bench and they are presented results of modeling and laboratory researches. It is developed the hardware and technological scheme of application of the developed equipment at industrial objects of pipeline transport.

Semiconductor technology in protein kinase research and drug discovery: sensing a revolution.

PubMed

Bhalla, Nikhil; Di Lorenzo, Mirella; Estrela, Pedro; Pula, Giordano

2017-02-01

Since the discovery of protein kinase activity in 1954, close to 600 kinases have been discovered that have crucial roles in cell physiology. In several pathological conditions, aberrant protein kinase activity leads to abnormal cell and tissue physiology. Therefore, protein kinase inhibitors are investigated as potential treatments for several diseases, including dementia, diabetes, cancer and autoimmune and cardiovascular disease. Modern semiconductor technology has recently been applied to accelerate the discovery of novel protein kinase inhibitors that could become the standard-of-care drugs of tomorrow. Here, we describe current techniques and novel applications of semiconductor technologies in protein kinase inhibitor drug discovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Satellite Power Systems /SPS/ - Overview of system studies and critical technology

NASA Technical Reports Server (NTRS)

Manson, S. V.

1980-01-01

Systems studies and critical technology issues for the development and evaluation of Satellite Power Systems (SPS) for the photovoltaic generation of electrical energy and its transmission to earth are reviewed. Initial concept studies completed in 1976 and system definition studies initiated in the same year have indicated the technical feasibility of SPS and identified challenging issues to be addressed as part of the SPS Concept Development and Evaluation Program. Systems considered in the study include photovoltaic and solar thermal power conversion configurations employing klystron or solid state microwave generators or lasers for power transmission, and power transmission options, system constructability and in-orbit and ground operations. Technology investigations are being performed in the areas of microwave power transmission, structure/controls interactions and the behavior of key materials in the space/SPS environment. Favorable results have been obtained in the areas of microwave phase distribution and phase control, dc-RF conversion, antenna radiating element, and no insurmountable problems have been discovered in any of the investigations to date.

Study on internal flow and surface deformation of large droplet levitated by ultrasonic wave.

PubMed

Abe, Yutaka; Hyuga, Daisuke; Yamada, Shogo; Aoki, Kazuyoshi

2006-09-01

It is expected that new materials will be manufactured with containerless processing under the microgravity environment in space. Under the microgravity environment, handling technology of molten metal is important for such processes. There are a lot of previous studies about droplet levitation technologies, including the use of acoustic waves, as the holding technology. However, experimental and analytical information about the relationship between surface deformation and internal flow of a large levitated droplet is still unknown. The purpose of this study is to experimentally investigate the large droplet behavior levitated by the acoustic wave field and its internal flow. To achieve this, first, numerical simulation is conducted to clarify the characteristics of acoustic wave field. Second, the levitation characteristic and the internal flow of the levitated droplet are investigated by the ultrasonic standing wave under normal gravity environment. Finally, the levitation characteristic and internal flow of levitated droplet are observed under microgravity in an aircraft to compare results with the experiment performed under the normal gravity environment.

Scientific applications of frequency-stabilized laser technology in space

NASA Technical Reports Server (NTRS)

Schumaker, Bonny L.

1990-01-01

A synoptic investigation of the uses of frequency-stabilized lasers for scientific applications in space is presented. It begins by summarizing properties of lasers, characterizing their frequency stability, and describing limitations and techniques to achieve certain levels of frequency stability. Limits to precision set by laser frequency stability for various kinds of measurements are investigated and compared with other sources of error. These other sources include photon-counting statistics, scattered laser light, fluctuations in laser power, and intensity distribution across the beam, propagation effects, mechanical and thermal noise, and radiation pressure. Methods are explored to improve the sensitivity of laser-based interferometric and range-rate measurements. Several specific types of science experiments that rely on highly precise measurements made with lasers are analyzed, and anticipated errors and overall performance are discussed. Qualitative descriptions are given of a number of other possible science applications involving frequency-stabilized lasers and related laser technology in space. These applications will warrant more careful analysis as technology develops.

Recent progress in VSTOL technology

NASA Technical Reports Server (NTRS)

Roberts, L.; Deckert, W. R.

1982-01-01

Progress in vertical and short takeoff and landing (V/STOL) aircraft technology, in particular, during the 1970 to 1980 period at Ames Research Center is discussed. Although only two kinds of V/STOL aircraft (the helicopter and the British direct lift Harrier) have achieved operational maturity, understanding of the technology has vastly improved during this 10 year period. To pursue an aggressive R and D program at a reasonable cost, it was decided to conduct extensive large scale testing in wind tunnel and flight simulation facilities, to develop low cost research aircraft using modified airframes or engines, and to involve other agencies and industry contractors in joint technical and funding arrangements. The STOL investigations include exploring STOL performance using the rotating cylinder flap concept, the augmentor wing, upon initiation of the Quiet Short Haul Research Aircraft program, the upper surface blown flap concept. The VTOL investigations were conducted using a tilt rotor aircraft, resulting in the XV-15 tilt rotor research aircraft. Direct jet lift is now being considered for application to future supersonic fighter aircraft.

Investigating the impact of visuohaptic simulations for the conceptual understanding of electric field for distributed charges

NASA Astrophysics Data System (ADS)

Shaikh, Uzma Abdul Sattar

The present study assessed the benefits of a multisensory intervention on the conceptual understanding of electric field for distributed charges in engineering and technology undergraduate students. A novel visuohaptic intervention was proposed, which focused on exploring the forces around the different electric field configurations for distributed charges namely point, infinitely long line and uniformly charged ring. The before and after effects of the visuohaptic intervention are compared, wherein the intervention includes instructional scaffolding. Three single-group studies were conducted to investigate the effect among three different populations: (a) Undergraduate engineering students, (b) Undergraduate technology students and (c) Undergraduate engineering technology students from a different demographic setting. The findings from the three studies suggests that the haptic modality intervention provides beneficial effects by allowing students to improve their conceptual understanding of electric field for distributed charges, although students from groups (b) and (c) showed a statistically significant increase in the conceptual understanding. The findings also indicate a positive learning perception among all the three groups.

Technologies for physical activity self-monitoring: a study of differences between users and non-users

PubMed Central

Åkerberg, Anna; Söderlund, Anne; Lindén, Maria

2017-01-01

Background Different kinds of physical activity (PA) self-monitoring technologies are used today to monitor and motivate PA behavior change. The user focus is essential in the development process of this technology, including potential future users such as representatives from the group of non-users. There is also a need to study whether there are differences between the groups of users and non-users. The aims of this study were to investigate possible differences between users and non-users regarding their opinions about PA self-monitoring technologies and to investigate differences in demographic variables between the groups. Materials and methods Participants were randomly selected from seven municipalities in central Sweden. In total, 107 adults responded to the Physical Activity Products Questionnaire, which consisted of 22 questions. Results Significant differences between the users and non-users were shown for six of the 20 measurement-related items: measures accurately (p=0.007), measures with high precision (p=0.024), measures distance (p=0.020), measures speed (p=0.003), shows minutes of activity (p=0.004), and shows geographical position (p=0.000). Significant differences between the users and non-users were also found for two of the 29 encouragement items: measures accurately (p=0.001) and has long-term memory (p=0.019). Significant differences between the groups were also shown for level of education (p=0.030) and level of physical exercise (p=0.037). Conclusion With a few exceptions, the users and the non-users in this study had similar opinions about PA self-monitoring technologies. Because this study showed significant differences regarding level of education and level of physical exercise, these demographic variables seemed more relevant to investigate than differences in opinions about the PA self-monitoring technologies. PMID:28280399

Replacement Technologies for Precision Cleaning of Aerospace Hardware for Propellant Service

NASA Technical Reports Server (NTRS)

Beeson, Harold; Kirsch, Mike; Hornung, Steven; Biesinger, Paul

1997-01-01

The NASA White Sands Test Facility (WSTF) is developing cleaning and verification processes to replace currently used chlorofluorocarbon-l13- (CFC-113-) based processes. The processes being evaluated include both aqueous- and solvent-based techniques. Replacement technologies are being investigated for aerospace hardware and for gauges and instrumentation. This paper includes the findings of investigations of aqueous cleaning and verification of aerospace hardware using known contaminants, such as hydraulic fluid and commonly used oils. The results correlate nonvolatile residue with CFC 113. The studies also include enhancements to aqueous sampling for organic and particulate contamination. Although aqueous alternatives have been identified for several processes, a need still exists for nonaqueous solvent cleaning, such as the cleaning and cleanliness verification of gauges used for oxygen service. The cleaning effectiveness of tetrachloroethylene (PCE), trichloroethylene (TCE), ethanol, hydrochlorofluorocarbon 225 (HCFC 225), HCFC 141b, HFE 7100(R), and Vertrel MCA(R) was evaluated using aerospace gauges and precision instruments and then compared to the cleaning effectiveness of CFC 113. Solvents considered for use in oxygen systems were also tested for oxygen compatibility using high-pressure oxygen autogenous ignition and liquid oxygen mechanical impact testing.

2002 NASA Seal/Secondary Air System Workshop. Volume 1

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

2003-01-01

The 2002 NASA Seal/Secondary Air System Workshop covered the following topics: (i) Overview of NASA s perspective of aeronautics and space technology for the 21st century; (ii) Overview of the NASA-sponsored Ultra-Efficient Engine Technology (UEET), Turbine-Based Combined-Cycle (TBCC), and Revolutionary Turbine Accelator (RTA) programs; (iii) Overview of NASA Glenn's seal program aimed at developing advanced seals for NASA's turbomachinery, space propulsion, and reentry vehicle needs; (iv) Reviews of sealing concepts, test results, experimental facilities, and numerical predictions; and (v) Reviews of material development programs relevant to advanced seals development. The NASA UEET and TBCC/RTA program overviews illustrated for the reader the importance of advanced technologies, including seals, in meeting future turbine engine system efficiency and emission goals. For example, the NASA UEET program goals include an 8- to 15-percent reduction in fuel burn, a 15-percent reduction in CO2, a 70-percent reduction in NOx, CO, and unburned hydrocarbons, and a 30-dB noise reduction relative to program baselines. The workshop also covered several programs NASA is funding to investigate advanced reusable space vehicle technologies (X-38) and advanced space ram/scramjet propulsion systems. Seal challenges posed by these advanced systems include high-temperature operation, resiliency at the operating temperature to accommodate sidewall flexing, and durability to last many missions.

Cost (non)-recovery by platform technology facilities in the Bio21 Cluster.

PubMed

Gibbs, Gerard; Clark, Stella; Quinn, Julieanne; Gleeson, Mary Joy

2010-04-01

Platform technologies (PT) are techniques or tools that enable a range of scientific investigations and are critical to today's advanced technology research environment. Once installed, they require specialized staff for their operations, who in turn, provide expertise to researchers in designing appropriate experiments. Through this pipeline, research outputs are raised to the benefit of the researcher and the host institution. Platform facilities provide access to instrumentation and expertise for a wide range of users beyond the host institution, including other academic and industry users. To maximize the return on these substantial public investments, this wider access needs to be supported. The question of support and the mechanisms through which this occurs need to be established based on a greater understanding of how PT facilities operate. This investigation was aimed at understanding if and how platform facilities across the Bio21 Cluster meet operating costs. Our investigation found: 74% of platforms surveyed do not recover 100% of direct operating costs and are heavily subsidized by their home institution, which has a vested interest in maintaining the technology platform; platform managers play a major role in establishing the costs and pricing of the facility, normally in a collaborative process with a management committee or institutional accountant; and most facilities have a three-tier pricing structure recognizing internal academic, external academic, and commercial clients.

Cost (Non)-Recovery by Platform Technology Facilities in the Bio21 Cluster

PubMed Central

Gibbs, Gerard; Clark, Stella; Quinn, JulieAnne; Gleeson, Mary Joy

2010-01-01

Platform technologies (PT) are techniques or tools that enable a range of scientific investigations and are critical to today's advanced technology research environment. Once installed, they require specialized staff for their operations, who in turn, provide expertise to researchers in designing appropriate experiments. Through this pipeline, research outputs are raised to the benefit of the researcher and the host institution.1 Platform facilities provide access to instrumentation and expertise for a wide range of users beyond the host institution, including other academic and industry users. To maximize the return on these substantial public investments, this wider access needs to be supported. The question of support and the mechanisms through which this occurs need to be established based on a greater understanding of how PT facilities operate. This investigation was aimed at understanding if and how platform facilities across the Bio21 Cluster meet operating costs. Our investigation found: 74% of platforms surveyed do not recover 100% of direct operating costs and are heavily subsidized by their home institution, which has a vested interest in maintaining the technology platform; platform managers play a major role in establishing the costs and pricing of the facility, normally in a collaborative process with a management committee or institutional accountant; and most facilities have a three-tier pricing structure recognizing internal academic, external academic, and commercial clients. PMID:20357980

System Analyses of Pneumatic Technology for High Speed Civil Transport Aircraft

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.; Tai, Jimmy C.; Kirby, Michelle M.; Roth, Bryce A.

1999-01-01

The primary aspiration of this study was to objectively assess the feasibility of the application of a low speed pneumatic technology, in particular Circulation Control (CC) to an HSCT concept. Circulation Control has been chosen as an enabling technology to be applied on a generic High Speed Civil Transport (HSCT). This technology has been proven for various subsonic vehicles including flight tests on a Navy A-6 and computational application on a Boeing 737. Yet, CC has not been widely accepted for general commercial fixed-wing use but its potential has been extensively investigated for decades in wind tunnels across the globe for application to rotorcraft. More recently, an experimental investigation was performed at Georgia Tech Research Institute (GTRI) with application to an HSCT-type configuration. The data from those experiments was to be applied to a full-scale vehicle to assess the impact from a system level point of view. Hence, this study attempted to quantitatively assess the impact of this technology to an HSCT. The study objective was achieved in three primary steps: 1) Defining the need for CC technology; 2) Wind tunnel data reduction; 3) Detailed takeoff/landing performance assessment. Defining the need for the CC technology application to an HSCT encompassed a preliminary system level analysis. This was accomplished through the utilization of recent developments in modern aircraft design theory at Aerospace Systems Design Laboratory (ASDL). These developments include the creation of techniques and methods needed for the identification of technical feasibility show stoppers. These techniques and methods allow the designer to rapidly assess a design space and disciplinary metric enhancements to enlarge or improve the design space. The takeoff and landing field lengths were identified as the concept "show-stoppers". Once the need for CC was established, the actual application of data and trends was assessed. This assessment entailed a reduction of the wind tunnel data from the experiments performed by Mr. Bob Englar at the GTRI. Relevant data was identified and manipulated based on the required format of the analysis tools utilized. Propulsive, aerodynamic, duct sizing, and vehicle sizing investigations were performed and information supplied to a detailed takeoff and landing tool, From the assessments, CC was shown to improve the low speed performance metrics, which were previously not satisfied. An HSCT with CC augmentation does show potential for full-scale application. Yet, an economic assessment of an HSCT with and without CC showed that a moderate penalty was incurred from the increased RDT&E costs associated with developing the CC technology and slight increases in empty weight.

Response to issues on GM agriculture in Africa: Are transgenic crops safe?

PubMed

Adenle, Ademola A

2011-10-08

The controversies surrounding transgenic crops, often called Genetically Modified Organisms (GMOs), call for a need to raise the level of public awareness of Genetic Modification (GM) technology in Africa. This should be accomplished by educating the public about the potential benefits and risks that may be associated with this new technology. In the last 15 years, GM crop producing countries have benefited from adoption of this new technology in the form of improved crop productivity, food security, and quality of life. The increased income to resource-poor farmers is a key benefit at the individual level especially as most countries using this technology are in the developing world, including three African countries (South Africa, Burkina Faso and Egypt). Despite clear benefits to countries and farmers who grow GMOs, many people are concerned about suspected potential risks associated with GMOs. This sparks debate as to whether GM technology should be adopted or not. Given the concerns regarding the safety of GMO products, thorough scientific investigation of safe application of GMOs is required. The objective of this paper is to respond to the issues of GM agriculture in Africa and some of the issues surrounding the adoption of GM crops between developed and developing countries. In this article, I analyse relevant papers relating to the adoption of GM technology particularly in developing countries including the few African countries that have adopted GM crops. The issues discussed span a wide range including: safety; potential benefits and risks; disputes between the United States of America (USA) and the European Union (EU) over adoption of GM crops with a focus on Africa continent. This article is concluded by summarising the issues raised and how GM technology can be adopted for agricultural development in Africa.

Response to issues on GM agriculture in Africa: Are transgenic crops safe?

PubMed Central

2011-01-01

The controversies surrounding transgenic crops, often called Genetically Modified Organisms (GMOs), call for a need to raise the level of public awareness of Genetic Modification (GM) technology in Africa. This should be accomplished by educating the public about the potential benefits and risks that may be associated with this new technology. In the last 15 years, GM crop producing countries have benefited from adoption of this new technology in the form of improved crop productivity, food security, and quality of life. The increased income to resource-poor farmers is a key benefit at the individual level especially as most countries using this technology are in the developing world, including three African countries (South Africa, Burkina Faso and Egypt). Despite clear benefits to countries and farmers who grow GMOs, many people are concerned about suspected potential risks associated with GMOs. This sparks debate as to whether GM technology should be adopted or not. Given the concerns regarding the safety of GMO products, thorough scientific investigation of safe application of GMOs is required. The objective of this paper is to respond to the issues of GM agriculture in Africa and some of the issues surrounding the adoption of GM crops between developed and developing countries. In this article, I analyse relevant papers relating to the adoption of GM technology particularly in developing countries including the few African countries that have adopted GM crops. The issues discussed span a wide range including: safety; potential benefits and risks; disputes between the United States of America (USA) and the European Union (EU) over adoption of GM crops with a focus on Africa continent. This article is concluded by summarising the issues raised and how GM technology can be adopted for agricultural development in Africa. PMID:21981823

Incorporating the Delphi Technique to investigate renewable energy technology transfer in Saudi Arabia

NASA Astrophysics Data System (ADS)

Al-Otaibi, Nasir K.

Saudi Arabia is a major oil-producing nation facing a rapidly-growing population, high unemployment, climate change, and the depletion of its natural resources, potentially including its oil supply. Technology transfer is regarded as a means to diversify countries' economies beyond their natural resources. This dissertation examined the opportunities and barriers to utilizing technology transfer successfully to build renewable energy resources in Saudi Arabia to diversify the economy beyond oil production. Examples of other developing countries that have successfully used technology transfer to transform their economies are explored, including Japan, Malayasia, and the United Arab Emirates. Brazil is presented as a detailed case study to illustrate its transition to an economy based to a much greater degree than before on renewable energy. Following a pilot study, the Delphi Method was used in this research to gather the opinions of a panel of technology transfer experts consisting of 10 heterogeneous members of different institutions in the Kingdom of Saudi Arabia, including aviation, telecommunication, oil industry, education, health systems, and military and governmental organizations. In three rounds of questioning, the experts identified Education, Dependence on Oil, and Manpower as the 3 most significant factors influencing the potential for success of renewable energy technology transfer for Saudi Arabia. Political factors were also rated toward the "Very Important" end of a Likert scale and were discussed as they impact Education, Oil Dependence, and Manpower. The experts' opinions are presented and interpreted. They form the basis for recommended future research and discussion of how in light of its political system and its dependence on oil, Saudi Arabia can realistically move forward on renewable energy technology transfer and secure its economic future.

From a lunar outpost to Mars - Science, policy and the U.S. Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Pilcher, Carl B.

1992-01-01

The technological developments required for the Space Exploration Initiative (SEI) objectives are discussed in terms of scientific investigation and present U.S. space policy. The results of the 90-Day Study are listed which include explicit suggestions for the successful exploration of the moon and Mars. The Outreach/Synthesis program is described which provides four methods for eliciting ideas, technologies, and research venues for lunar and Martian missions. The results of the studies include 5 scientific objectives such as the relationship between the sun, planetary atmospheres, and climate. The protection of human life from potential extraterrestrial hazards such as radiation is also found to be a key objective of SEI as are the theoretical and practical issues of scientific research.

Genomic Approaches to Zebrafish Cancer

PubMed Central

2017-01-01

The zebrafish has emerged as an important model for studying cancer biology. Identification of DNA, RNA and chromatin abnormalities can give profound insight into the mechanisms of tumorigenesis and the there are many techniques for analyzing the genomes of these tumors. Here, I present an overview of the available technologies for analyzing tumor genomes in the zebrafish, including array based methods as well as next-generation sequencing technologies. I also discuss the ways in which zebrafish tumor genomes can be compared to human genomes using cross-species oncogenomics, which act to filter genomic noise and ultimately uncover central drivers of malignancy. Finally, I discuss downstream analytic tools, including network analysis, that can help to organize the alterations into coherent biological frameworks that can then be investigated further. PMID:27165352

Proceedings of the Eighteenth NASA Propagation Experimenters Meeting (NAPEX 18) and the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop

NASA Technical Reports Server (NTRS)

Davarian, Faramaz (Editor)

1994-01-01

The NASA Propagation Experimenters Meeting (NAPEX), supported by the NASA Propagation Program, is convened annually to discuss studies made on radio wave propagation by investigators from domestic and international organizations. Participants included representatives from Canada, the Netherlands, England, and the United States, including researchers from universities, government agencies, and private industry. The meeting was organized into two technical sessions. The first session was dedicated to slant path propagation studies and experiments. The second session focused on propagation studies for mobile, personal, and sound broadcast systems. In total, 14 technical papers and some informal contributions were presented. Preceding NAPEX_17, the Advanced Communications Technology Satellite (ACTS) Propagation Studies Miniworkshop was held to review ACTS propagation activities.

Educational Reform and the World of Work: France. Reforms at the First Level of Secondary School

ERIC Educational Resources Information Center

Western European Education, 1977

1977-01-01

Investigates the effect of technical progress on educational reform in France. Factors considered include the lengthening of compulsory schooling, introduction of guidance and counseling facilities, vocational education reforms, and introduction of technology as a subject in the secondary school curriculum. (Author/DB)

Activities of the Remote Sensing Information Sciences Research Group

NASA Technical Reports Server (NTRS)

Estes, J. E.; Botkin, D.; Peuquet, D.; Smith, T.; Star, J. L. (Principal Investigator)

1984-01-01

Topics on the analysis and processing of remotely sensed data in the areas of vegetation analysis and modelling, georeferenced information systems, machine assisted information extraction from image data, and artificial intelligence are investigated. Discussions on support field data and specific applications of the proposed technologies are also included.

Digital Citizenship Instruction in Pennsylvania Public Schools: School Leaders Expressed Beliefs and Current Practices

ERIC Educational Resources Information Center

Suppo, Chris A.

2013-01-01

The purpose of this study was to investigate digital citizenship in Pennsylvania public schools based on the responses of school leaders including superintendents, curriculum coordinators, and technology coordinators. This study examined the relationship between Pennsylvania school leader's beliefs and the implementation of digital citizenship…

Investigation of Teachers' Attitudes towards Computer Use in Primary Education in Kurdistan

ERIC Educational Resources Information Center

Balisane, Hewa

2015-01-01

Technological advances have pervasively changed our behaviours, beliefs and approaches in working, socialising and entertaining. Educators, including those in primary education, have acknowledged the positive effects of computer use in the classroom in various ways. With regard to pedagogical consideration, primary school teachers have adopted…

Achieving Standards in a Fiber Optic Mathematics Classroom.

ERIC Educational Resources Information Center

Zbiek, Rose Mary; Foletta, Gina M.

1995-01-01

In response to standards set by the National Council of Teachers of Mathematics, K-12 teachers were interviewed to investigate issues related to implementing standards in K-12 fiber optic mathematics classes. Issues include: achieving student-centered classrooms; incorporating technology into distance education; and structuring assessment so more…

Use of Microarray to Analyze Gene Expression Profiles of Acute Effects of Prochloraz on Fathead Minnows Pimephales promelas

EPA Science Inventory

Microarray technology is a powerful tool to investigate the gene expression profiles for thousands of genes simultaneously. In recent years, microarrays have been used to characterize environmental pollutants and identify molecular mode(s) of action of chemicals including endocri...

76 FR 6826 - Certain Display Devices Including Digital Televisions and Monitors; Notice of Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-08

... Commission instituted this investigation on April 21, 2010, based on a complaint filed by Sony Corporation of Japan (``Sony''). 75 FR 20860-1. The complaint, as amended and supplemented, alleges violations of... Corporation and Innolux Corporation (collectively ``CMI''); TPV Technology Limited; Top Victory Electronics...

Determination of Student Opinions in Augmented Reality

ERIC Educational Resources Information Center

Bicen, Huseyin; Bal, Erkan

2016-01-01

The rapid development of the new technology has changed classroom teaching methods and tools in a positive way. This study investigated the classroom learning with augmented reality and the impact of student opinions. 97 volunteer undergraduate students took part in this study. Results included data in the form of frequencies, percentages and…

78 FR 774 - Joy Global, Inc., Also Known as Joy Technologies, Inc., Including On-Site Leased Workers From All...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

... Manpower, Franklin, PA; Notice of Affirmative Determination Regarding Application for Reconsideration By... All Seasons Temporaries and Manpower, Franklin, Pennsylvania (Joy Global). The determination was... product. The initial investigation resulted in a negative determination based on the findings that, with...

Polish Teenage Students' Willingness to Engage in On-Line Intercultural Interactions

ERIC Educational Resources Information Center

Wach, Aleksandra

2013-01-01

Computer-based technologies, including various forms of computer-mediated communication (CMC), provide L2 users with opportunities to engage in intercultural interactions which may promote the development of their intercultural communicative competence. The article reports the findings of a study that investigated how beyond-the-classroom…

Bi-axial Vibration Energy Harvesting

DTIC Science & Technology

2012-07-01

included early dedicated portable signal averaging equipment, Nomad, CT4 and F18 fatigue test control systems and some field trials. Currently he is...and repairs to acoustically- fatigued structures. ____________________ ________________________________________________ UNCLASSIFIED...Physicists at the Tokyo Institute of Technology investigated various piezoceramic materials [20], developing lead zirconate titanate ( PZT ) in around 1952

Teacher Self-Efficacy during the Implementation of a Problem-Based Science Curriculum

ERIC Educational Resources Information Center

Hodges, Charles B.; Gale, Jessica; Meng, Alicia

2016-01-01

This study was conducted to investigate eighth-grade science teachers' self-efficacy during the implementation of a new, problem-based science curriculum. The curriculum included applications of LEGO® robotics, a new technology for these teachers. Teachers' responded to structured journaling activities designed to collect information about their…

Space station needs, attributes and architectural options study

NASA Technical Reports Server (NTRS)

1983-01-01

All the candidate Technology Development missions investigated during the space station needs, attributes, and architectural options study are described. All the mission data forms plus additional information such as, cost, drawings, functional flows, etc., generated in support of these mission is included with a computer generated mission data form.

Previously Funded Teams | Division of Cancer Prevention

Cancer.gov

The first group of NCI-supported Tumor Glycomics Laboratories teams offered different approaches and concentrations to exploit the potential of glycomics to yield biomarkers for early cancer detection, and used various technologies to investigate complex carbohydrate biochemistry. They are listed here with links to more information about each laboratory, including publications

Investigation of the Factors That Influence Undergraduate Student Chemistry Course Selection

ERIC Educational Resources Information Center

Hinds, Elsa M.; Shultz, Ginger V.

2018-01-01

The introductory chemistry sequence is a common pathway for undergraduates pursuing science, technology, engineering, and math (STEM) and prehealth careers. Student's academic decision-making has far-reaching consequences for their trajectory, including persistence in the major and ultimate career choice. This phenomenon was studied using a survey…

Materials and structures technology insertion into spacecraft systems: Successes and challenges

NASA Astrophysics Data System (ADS)

Rawal, Suraj

2018-05-01

Over the last 30 years, significant advancements have led to the use of multifunctional materials and structures technologies in spacecraft systems. This includes the integration of adaptive structures, advanced composites, nanotechnology, and additive manufacturing technologies. Development of multifunctional structures has been directly influenced by the implementation of processes and tools for adaptive structures pioneered by Prof. Paolo Santini. Multifunctional materials and structures incorporating non-structural engineering functions such as thermal, electrical, radiation shielding, power, and sensors have been investigated. The result has been an integrated structure that offers reduced mass, packaging volume, and ease of integration for spacecraft systems. Current technology development efforts are being conducted to develop innovative multifunctional materials and structures designs incorporating advanced composites, nanotechnology, and additive manufacturing. However, these efforts offer significant challenges in the qualification and acceptance into spacecraft systems. This paper presents a brief overview of the technology development and successful insertion of advanced material technologies into spacecraft structures. Finally, opportunities and challenges to develop and mature next generation advanced materials and structures are presented.

"It's all about incentive": Social technology as a potential facilitator for self-determined physical activity participation for young people with physical disabilities.

PubMed

Knibbe, Tara Joy; McPherson, Amy C; Gladstone, Brenda; Biddiss, Elaine

2017-09-29

To investigate the perceived role of social technologies in promoting physical activity participation for young people with physical disabilities and to identify design considerations that should be addressed when creating social technologies to promote physical activity. Interactive design workshops for young people with physical disabilities aged 12-18 (n = 8) were held. Data were analyzed using interpretive thematic analysis. Young people perceived significant benefit for social technologies to promote physical activity as they have the potential to overcome many barriers to physical activity participation. Design features recommended by the participants included (1) options for diverse interests and preferences, (2) provision of informational support, (3) support through equitable technology design, (4) incentive through competition and play, and (5) opportunities to develop community. Social technology has potential to provide tailored, equitable opportunities for social engagement and physical activity participation for young people with physical disabilities through needs- and preference-specific design.

Aeronautical technology 2000: A projection of advanced vehicle concepts

NASA Technical Reports Server (NTRS)

1985-01-01

The Aeronautics and Space Engineering Board (ASEB) of the National Research Council conducted a Workshop on Aeronautical Technology: a Projection to the Year 2000 (Aerotech 2000 Workshop). The panels were asked to project advances in aeronautical technologies that could be available by the year 2000. As the workshop was drawing to a close, it became evident that a more comprehensive investigation of advanced air vehicle concepts than was possible in the limited time available at the workshop would be valuable. Thus, a special panel on vehicle applications was organized. In the course of two meetings, the panel identified and described representative types of aircraft judged possible with the workshop's technology projections. These representative aircraft types include: military aircraft; transport aircraft; rotorcraft; extremely high altitude aircraft; and transatmospheric aircraft. Improvements in performance, efficiency, and operational characteristics possible through the application of the workshop's year 2000 technology projections were discussed. The subgroups also identified the technologies considered essential and enhancing or supporting to achieve the projected aircraft improvements.

Online self-management interventions for chronically ill patients: cognitive impairment and technology issues.

PubMed

Archer, Norm; Keshavjee, Karim; Demers, Catherine; Lee, Ryan

2014-04-01

As the fraction of the population with chronic diseases continues to grow, methods and/or technologies must be found to help the chronically ill to take more responsibility to self-manage their illnesses. Internet based and/or mobile support for disease self-management interventions have often proved effective, but patients with chronic illnesses may have co-occurring cognitive impairment, making it more difficult for them to cope with technologies. Many older patients are also not familiar with technologies or they may have cognitive disabilities or dementia that reduce their ability to self-manage their healthcare. On-line solutions to the needs of chronically ill patients must be investigated and acted upon with care in an integrated manner, since resources invested in these solutions will be lost if patients do not adopt and continue to use them successfully. To review the capabilities of online and mobile support for self-management of chronic illnesses, and the impacts that age and disease-related issues have on these interventions, including cognitive impairment and lack of access or familiarity with Internet or mobile technologies. This study includes a review of the co-occurrence of cognitive impairment with chronic diseases, and discusses how cognitive impairment, dyadic caregiver patient support, patient efficacy with technology, and smart home technologies can impact the effectiveness and sustainability of online support for disease self-management. Disease self-management interventions (SMIs) using online patient centered support can often enable patients to manage their own chronic illnesses. However, our findings show that cognitive impairment often co-occurs in patients with chronic disease. This, along with age-related increases in multiple chronic illnesses and lack of technology efficacy, can be obstacles to Internet and mobile support for chronic disease self-management. Patients with chronic diseases may have greater than expected difficulties in using Internet and mobile technologies for disease self-management, often due to cognitive impairment or unfamiliarity with technology. Approaches to dealing with such barriers include suitable integration of solutions involving patient-caregiver dyads, better design of online applications, careful attention to technology adoption and sustainability, and smart home technologies. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Tenure Track/Tenure Eligible Positions | Center for Cancer Research

Cancer.gov

The newly established RNA Biology Laboratory at the Center for Cancer Research (CCR), National Cancer Institute (NCI), National Institutes of Health (NIH) in Frederick, Maryland is recruiting Tenure-eligible or Tenure Track Investigators to join the Intramural Research Program’s mission of high impact, high reward science. These positions, which are supported with stable financial resources, are the equivalent of Assistant Professor/Associate Professor/Professor in an academic department. The RNA Biology Laboratory is looking for candidate(s) who will complement our current group of seven dynamic and collaborative principal investigators (https://ccr.cancer.gov/RNA-Biology-Laboratory). We encourage outstanding scientists investigating any area of RNA Biology to apply. Areas of interest include, but are not limited to, the roles of RNA-binding proteins, noncoding RNAs and nucleotide modifications in cell and organismal function; the ways in which alterations in RNA homeostasis resul  t in diseases such as cancer, and the development of RNA therapeutics. About NCI's Center for Cancer Research The Center for Cancer Research (CCR) is an intramural research component of the National Cancer Institute (NCI). CCR’s enabling infrastructure facilitates clinical studies at the NIH Clinical Center, the world’s largest dedicated clinical research complex; provides extensive opportunities for collaboration; and allows scientists and clinicians to undertake high-impact laboratory- and clinic-based investigations.  Investigators are supported by a wide array of intellectual and technological and research resources, including animal facilities and dedicated, high quality technology cores in areas such as imaging/microscopy, including cryo-electron microscopy; chemistry/purification, mass spectrometry, flow cytometry, SAXS, genomics/DNA sequencing, transgenics and knock out mice, arrays/molecular profiling, and human genetics/bioinformatics.  For an overview of CCR, please visit http://ccr.cancer.gov/.

The acquisition of inquiry skills and computer skills by 8th grade urban middle school students in a technology-supported environment

NASA Astrophysics Data System (ADS)

Ruffin, Monya Aisha

The evolution of increased global accessibility and dependency on computer technologies has revolutionized most aspects of everyday life, including a rapid transformation of 21st century schools. Current changes in education reflect the need for the integration of effective computer technologies in school curricula. The principal objective of this investigation was to examine the acquisition of computer skills and inquiry skills by urban eighth grade students in a technology-supported environment. The study specifically focused on students' ability to identify, understand, and work through the process of scientific inquiry, while also developing computer technology tool skills. The unique component of the study was its contextualization within a local historically significant setting---an African-American cemetery. Approximately seventy students, in a local middle school, participated in the five-week treatment. Students conducted research investigations on site and over the Internet, worked in collaborative groups, utilized technology labs, and received inquiry and computer technology instruction. A mixed method design employing quantitative and qualitative methods was used. Two pilot studies conducted in an after-school science club format helped sharpen the research question, data collection methods, and survey used in the school-based study. Complete sets of data from pre and post surveys and journals were collected from sixty students. Six students were randomly selected to participate in in-depth focus group interviews. Researcher observations and inferences were also included in the analysis. The research findings showed that, after the treatment, students: (a) acquired more inquiry skills and computer skills, (b) broadened their basic conceptual understanding and perspective about science, (c) engaged actively in a relevant learning process, (d) created tangible evidence of their inquiry skills and computer skills, and (e) recalled and retained more details about the inquiry process and the computer technology tools (when they attended at least 80% of the treatment sessions). The findings indicated that project-based, technology-supported experiences allowed students to learn content in an interdisciplinary way (building on culturally relevant local histories) and provided enjoyable learning opportunities for students and teachers. Participation in the treatment encouraged students to think beyond the technical aspects of technology and relate its relevancy and usefulness to solving scientific queries.

Simulation of Cascaded Longitudinal-Space-Charge Amplifier at the Fermilab Accelerator Science & Technology (Fast) Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Halavanau, A.; Piot, P.

2015-12-01

Cascaded Longitudinal Space Charge Amplifiers (LSCA) have been proposed as a mechanism to generate density modulation over a board spectral range. The scheme has been recently demonstrated in the optical regime and has confirmed the production of broadband optical radiation. In this paper we investigate, via numerical simulations, the performance of a cascaded LSCA beamline at the Fermilab Accelerator Science & Technology (FAST) facility to produce broadband ultraviolet radiation. Our studies are carried out using elegant with included tree-based grid-less space charge algorithm.

Ion-beam technology and applications

NASA Technical Reports Server (NTRS)

Hudson, W. R.; Robson, R. R.; Sovey, J. S.

1977-01-01

Ion propulsion research and development yields a mature technology that is transferable to a wide range of nonpropulsive applications, including terrestrial and space manufacturing. A xenon ion source was used for an investigation into potential ion-beam applications. The results of cathode tests and discharge-chamber experiments are presented. A series of experiments encompassing a wide range of potential applications is discussed. Two types of processes, sputter deposition, and erosion were studied. Some of the potential applications are thin-film Teflon capacitor fabrication, lubrication applications, ion-beam cleaning and polishing, and surface texturing.

Reducing the stair step effect of layer manufactured surfaces by ball burnishing

NASA Astrophysics Data System (ADS)

Hiegemann, Lars; Agarwal, Chiranshu; Weddeling, Christian; Tekkaya, A. Erman

2016-10-01

The layer technology enables fast and flexible additive manufacturing of forming tools. The disadvantages of this system is the formation of stair steps in the range of tool radii. Within this work a new method to smooth this stair steps by ball burnishing is introduced. This includes studies on the general feasibility of the process and the determination of the influence of the rolling parameters. The investigations are carried out experimentally and numerically. Ultimately, the gained knowledge is applied to finish a deep drawing tool which is manufactured by layer technology.

Numerical and Theoretical Considerations for the Design of the AVT-183 Diamond-Wing Experimental Investigations

NASA Technical Reports Server (NTRS)

Boelens, Okko J.; Luckring, James M.; Breitsamter, Christian; Hovelmann, Andreas; Knoth, Florian; Malloy, Donald J.; Deck, Sebatien

2015-01-01

A diamond-wing configuration has been developed to isolate and study blunt-leading edge vortex separation with both computations and experiments. The wing has been designed so that the results are relevant to a more complex Uninhabited Combat Air Vehicle concept known as SACCON. The numerical and theoretical development process for this diamond wing is presented, including a view toward planned wind tunnel experiments. This work was conducted under the NATO Science and Technology Organization, Applied Vehicle Technology panel. All information is in the public domain.

Mars power system concept definition study. Volume 2: Appendices

NASA Technical Reports Server (NTRS)

Littman, Franklin D.

1994-01-01

This report documents the work performed by Rockwell International's Rocketdyne Division on NASA Contract No. NAS3-25808 (Task Order No. 16) entitled 'Mars Power System Definition Study'. This work was performed for NASA's Lewis Research Center (LeRC). The report is divided into two volumes as follows: Volume 1 - Study Results; and Volume 2 - Appendices. The results of the power system characterization studies, operations studies, and technology evaluations are summarized in Volume 1. The appendices include complete, standalone technology development plans for each candidate power system that was investigated.

Commercial Instrumentation Technology Associates, Biomedical Experiments

NASA Technical Reports Server (NTRS)

2003-01-01

Experiments to seek solutions for a range of biomedical issues are at the heart of several investigations that will be hosted by the Commercial Instrumentation Technology Associates (ITA), Inc. Biomedical Experiments (CIBX-2) payload. CIBX-2 is unique, encompassing more than 20 separate experiments including cancer research, commercial experiments, and student hands-on experiments from 10 schools as part of ITA's ongoing University Among the Stars program. A number of Liquids Mixing Apparatus (LMA) syringes like this one will be used in the experiments. The experiments are sponsored by NASA's Space Product Development Program (SPD).

Mechanical Technology Development on A 35-m Deployable Radar Antenna for Monitoring Hurricanes

NASA Technical Reports Server (NTRS)

Fang, Houfei; Im, Eastwood

2006-01-01

The NEXRAD in Space project develops a novel instrument concept and the associated antenna technologies for a 35-GHz Doppler radar to monitor hurricanes, cyclones, and severe storms from a geostationary orbit. Mechanical challenges of this concept include a 35-m diameter lightweight in space deployable spherical reflector and a feeder scanning mechanism. The feasibility of using shape memory polymer material to develop the large deployable reflector has been investigated by this study. A spiral scanning mechanism concept has been developed and demonstrated by an engineering model.

Existing generating assets squeezed as new project starts slow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, R.B.; Tiffany, E.D.

Most forecasting reports concentrate on political or regulatory events to predict future industry trends. Frequently overlooked are the more empirical performance trends of the principal power generation technologies. Solomon and Associates queried its many power plant performance databases and crunched some numbers to identify those trends. Areas of investigation included reliability, utilization (net output factor and net capacity factor) and cost (operating costs). An in-depth analysis for North America and Europe is presented in this article, by region and by regeneration technology. 4 figs., 2 tabs.

Microwave and millimeter wave monolithic integrated circuits (MIMIC) program. MIMIC briefs: Summaries of phase 3 technology support programs

NASA Astrophysics Data System (ADS)

Kramer, Warner

1993-01-01

This publication contains technical and contractual summaries of the MIMIC program's Phase 3 technology support programs. Each project description includes a discussion of the objectives of the effort, the approach pursued, and recent progress. Also identified are the performing organization(s), principal investigator and/or other key personnel, contract number, program funding and duration, and program monitor/COTR. Concluding the document is a directory of the personnel associated with these projects, from whom more information may be requested.

STRUCTURAL BIOLOGY AND MOLECULAR MEDICINE RESEARCH PROGRAM (LSBMM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eisenberg, David S.

2008-07-15

The UCLA-DOE Institute of Genomics and Proteomics is an organized research unit of the University of California, sponsored by the Department of Energy through the mechanism of a Cooperative Agreement. Today the Institute consists of 10 Principal Investigators and 7 Associate Members, developing and applying technologies to promote the biological and environmental missions of the Department of Energy, and 5 Core Technology Centers to sustain this work. The focus is on understanding genomes, pathways and molecular machines in organisms of interest to DOE, with special emphasis on developing enabling technologies. Since it was founded in 1947, the UCLA-DOE Institute hasmore » adapted its mission to the research needs of DOE and its progenitor agencies as these research needs have changed. The Institute started as the AEC Laboratory of Nuclear Medicine, directed by Stafford Warren, who later became the founding Dean of the UCLA School of Medicine. In this sense, the entire UCLA medical center grew out of the precursor of our Institute. In 1963, the mission of the Institute was expanded into environmental studies by Director Ray Lunt. I became the third director in 1993, and in close consultation with David Galas and John Wooley of DOE, shifted the mission of the Institute towards genomics and proteomics. Since 1993, the Principal Investigators and Core Technology Centers are entirely new, and the Institute has separated from its former division concerned with PET imaging. The UCLA-DOE Institute shares the space of Boyer Hall with the Molecular Biology Institute, and assumes responsibility for the operation of the main core facilities. Fig. 1 gives the organizational chart of the Institute. Some of the benefits to the public of research carried out at the UCLA-DOE Institute include the following: The development of publicly accessible, web-based databases, including the Database of Protein Interactions, and the ProLinks database of genomicly inferred protein function linkages. The development of publicly accessible, web-based servers, including the HOTPATCH server, the ProKnow Server and the SAVEs server. All of these are accessible from the home page of the Institute. Advancing the science of bioenergy, in the laboratories of the Principal Investigators of the Institute, including the laboratories of Shimon Weiss, James Liao, James Bowie, Todd Yeates, Rob Gunsalus.« less

Life Cycle Analysis of Dedicated Nano-Launch Technologies

NASA Technical Reports Server (NTRS)

Zapata, Edgar; McCleskey, Carey; Martin, John; Lepsch, Roger; Hernani, Tosoc

2014-01-01

Recent technology advancements have enabled the development of small cheap satellites that can perform useful functions in the space environment. Currently, the only low cost option for getting these payloads into orbit is through ride share programs. As a result, these launch opportunities await primary payload launches and a backlog exists. An alternative option would be dedicated nano-launch systems built and operated to provide more flexible launch services, higher availability, and affordable prices. The potential customer base that would drive requirements or support a business case includes commercial, academia, civil government and defense. Further, NASA technology investments could enable these alternative game changing options.With this context, in 2013 the Game Changing Development (GCD) program funded a NASA team to investigate the feasibility of dedicated nano-satellite launch systems with a recurring cost of less than $2 million per launch for a 5 kg payload to low Earth orbit. The team products would include potential concepts, technologies and factors for enabling the ambitious cost goal, exploring the nature of the goal itself, and informing the GCD program technology investment decision making process. This paper provides an overview of the life cycle analysis effort that was conducted in 2013 by an inter-center NASA team. This effort included the development of reference nano-launch system concepts, developing analysis processes and models, establishing a basis for cost estimates (development, manufacturing and launch) suitable to the scale of the systems, and especially, understanding the relationship of potential game changing technologies to life cycle costs, as well as other factors, such as flights per year.

Maturation of enabling technologies for the next generation reignitable cryogenic upper stage

NASA Astrophysics Data System (ADS)

Mueller, Mark

Following the ESA decision in November 2008, a pre-development phase (Phase 1) of a future evolution of the Ariane 5 launcher (named Ariane 5 Midlife Evolution, A5ME) was started under Astrium Prime leadership. This upgraded version of the Ariane 5 launcher is based on an enhanced performance Upper Stage including the cryogenic re-ignitable VINCI engine. Thanks to this reignition capability, this new Upper Stage shall be "versatile" in the sense that it shall fulfil customer needs on a broader spectrum of orbits than the "standard" orbits (i.e. Geosynchronous Transfer Orbits, GTO) typically used for commercial telecommunications satellites. In order to meet the challenges of versatility, new technologies are currently being investigated. These technologies are mainly related -but not limited-to propellant management during the extended coasting phases with the related heat transfer into the tanks and the required multiple engine re-ignitions. Within the frame of the ESA Future Launchers Preparatory Programme (Period 2 Slice 1), the Cryogenic Upper Stage Technology project (CUST) aims to mature critical technologies to such a Technology Readiness Level (TRL) that they can be integrated into the baseline A5ME Upper Stage development schedule. In addition to A5ME application, these technologies can also be used on the future next generation European launcher. This paper shows the down-selection process implemented to identify the most crucial enabling technologies for a future versatile Upper Stage and gives a description of each technology finally selected for maturation in the frame of CUST. These include -amongst others-a Sandwich Common Bulkhead for the propellant tank, an external thermal insulation kit and various propellant management devices for the coasting phase. The paper also gives an overview on the related development and maturation plan including the tests to be conducted, as well as first results of the maturation activities themselves.

Conceptual design and feasibility evaluation model of a 10 to the 8th power bit oligatomic mass memory. Volume 1: Conceptual design

NASA Technical Reports Server (NTRS)

Recksiedler, A. L.; Lutes, C. L.

1972-01-01

The oligatomic (mirror) thin film memory technology is a suitable candidate for general purpose spaceborne applications in the post-1975 time frame. Capacities of around 10 to the 8th power bits can be reliably implemented with systems designed around a 335 million bit module. The recommended mode was determined following an investigation of implementation sizes ranging from an 8,000,000 to 100,000,000 bits per module. Cost, power, weight, volume, reliability, maintainability and speed were investigated. The memory includes random access, NDRO, SEC-DED, nonvolatility, and dual interface characteristics. The applications most suitable for the technology are those involving a large capacity with high speed (no latency), nonvolatility, and random accessing.

Optimization of knowledge-based systems and expert system building tools

NASA Technical Reports Server (NTRS)

Yasuda, Phyllis; Mckellar, Donald

1993-01-01

The objectives of the NASA-AMES Cooperative Agreement were to investigate, develop, and evaluate, via test cases, the system parameters and processing algorithms that constrain the overall performance of the Information Sciences Division's Artificial Intelligence Research Facility. Written reports covering various aspects of the grant were submitted to the co-investigators for the grant. Research studies concentrated on the field of artificial intelligence knowledge-based systems technology. Activities included the following areas: (1) AI training classes; (2) merging optical and digital processing; (3) science experiment remote coaching; (4) SSF data management system tests; (5) computer integrated documentation project; (6) conservation of design knowledge project; (7) project management calendar and reporting system; (8) automation and robotics technology assessment; (9) advanced computer architectures and operating systems; and (10) honors program.

Statistical assessment of the learning curves of health technologies.

PubMed

Ramsay, C R; Grant, A M; Wallace, S A; Garthwaite, P H; Monk, A F; Russell, I T

2001-01-01

(1) To describe systematically studies that directly assessed the learning curve effect of health technologies. (2) Systematically to identify 'novel' statistical techniques applied to learning curve data in other fields, such as psychology and manufacturing. (3) To test these statistical techniques in data sets from studies of varying designs to assess health technologies in which learning curve effects are known to exist. METHODS - STUDY SELECTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): For a study to be included, it had to include a formal analysis of the learning curve of a health technology using a graphical, tabular or statistical technique. METHODS - STUDY SELECTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): For a study to be included, it had to include a formal assessment of a learning curve using a statistical technique that had not been identified in the previous search. METHODS - DATA SOURCES: Six clinical and 16 non-clinical biomedical databases were searched. A limited amount of handsearching and scanning of reference lists was also undertaken. METHODS - DATA EXTRACTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): A number of study characteristics were abstracted from the papers such as study design, study size, number of operators and the statistical method used. METHODS - DATA EXTRACTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): The new statistical techniques identified were categorised into four subgroups of increasing complexity: exploratory data analysis; simple series data analysis; complex data structure analysis, generic techniques. METHODS - TESTING OF STATISTICAL METHODS: Some of the statistical methods identified in the systematic searches for single (simple) operator series data and for multiple (complex) operator series data were illustrated and explored using three data sets. The first was a case series of 190 consecutive laparoscopic fundoplication procedures performed by a single surgeon; the second was a case series of consecutive laparoscopic cholecystectomy procedures performed by ten surgeons; the third was randomised trial data derived from the laparoscopic procedure arm of a multicentre trial of groin hernia repair, supplemented by data from non-randomised operations performed during the trial. RESULTS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: Of 4571 abstracts identified, 272 (6%) were later included in the study after review of the full paper. Some 51% of studies assessed a surgical minimal access technique and 95% were case series. The statistical method used most often (60%) was splitting the data into consecutive parts (such as halves or thirds), with only 14% attempting a more formal statistical analysis. The reporting of the studies was poor, with 31% giving no details of data collection methods. RESULTS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: Of 9431 abstracts assessed, 115 (1%) were deemed appropriate for further investigation and, of these, 18 were included in the study. All of the methods for complex data sets were identified in the non-clinical literature. These were discriminant analysis, two-stage estimation of learning rates, generalised estimating equations, multilevel models, latent curve models, time series models and stochastic parameter models. In addition, eight new shapes of learning curves were identified. RESULTS - TESTING OF STATISTICAL METHODS: No one particular shape of learning curve performed significantly better than another. The performance of 'operation time' as a proxy for learning differed between the three procedures. Multilevel modelling using the laparoscopic cholecystectomy data demonstrated and measured surgeon-specific and confounding effects. The inclusion of non-randomised cases, despite the possible limitations of the method, enhanced the interpretation of learning effects. CONCLUSIONS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: The statistical methods used for assessing learning effects in health technology assessment have been crude and the reporting of studies poor. CONCLUSIONS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: A number of statistical methods for assessing learning effects were identified that had not hitherto been used in health technology assessment. There was a hierarchy of methods for the identification and measurement of learning, and the more sophisticated methods for both have had little if any use in health technology assessment. This demonstrated the value of considering fields outside clinical research when addressing methodological issues in health technology assessment. CONCLUSIONS - TESTING OF STATISTICAL METHODS: It has been demonstrated that the portfolio of techniques identified can enhance investigations of learning curve effects. (ABSTRACT TRUNCATED)

Distributed decision making in action: diagnostic imaging investigations within the bigger picture.

PubMed

Makanjee, Chandra R; Bergh, Anne-Marie; Hoffmann, Willem A

2018-03-01

Decision making in the health care system - specifically with regard to diagnostic imaging investigations - occurs at multiple levels. Professional role players from various backgrounds are involved in making these decisions, from the point of referral to the outcomes of the imaging investigation. The aim of this study was to map the decision-making processes and pathways involved when patients are referred for diagnostic imaging investigations and to explore distributed decision-making events at the points of contact with patients within a health care system. A two-phased qualitative study was conducted in an academic public health complex with the district hospital as entry point. The first phase included case studies of 24 conveniently selected patients, and the second phase involved 12 focus group interviews with health care providers. Data analysis was based on Rapley's interpretation of decision making as being distributed across time, situations and actions, and including different role players and technologies. Clinical decisions incorporating imaging investigations are distributed across the three vital points of contact or decision-making events, namely the initial patient consultation, the diagnostic imaging investigation and the post-investigation consultation. Each of these decision-making events is made up of a sequence of discrete decision-making moments based on the transfer of retrospective, current and prospective information and its transformation into knowledge. This paper contributes to the understanding of the microstructural processes (the 'when' and 'where') involved in the distribution of decisions related to imaging investigations. It also highlights the interdependency in decision-making events of medical and non-medical providers within a single medical encounter. © 2017 The Authors. Journal of Medical Radiation Sciences published by John Wiley & Sons Australia, Ltd on behalf of Australian Society of Medical Imaging and Radiation Therapy and New Zealand Institute of Medical Radiation Technology.

Omics Research on the International Space Station

NASA Technical Reports Server (NTRS)

Love, John

2015-01-01

The International Space Station (ISS) is an orbiting laboratory whose goals include advancing science and technology research. Completion of ISS assembly ushered a new era focused on utilization, encompassing multiple disciplines such as Biology and Biotechnology, Physical Sciences, Technology Development and Demonstration, Human Research, Earth and Space Sciences, and Educational Activities. The research complement planned for upcoming ISS Expeditions 45&46 includes several investigations in the new field of omics, which aims to collectively characterize sets of biomolecules (e.g., genomic, epigenomic, transcriptomic, proteomic, and metabolomic products) that translate into organismic structure and function. For example, Multi-Omics is a JAXA investigation that analyzes human microbial metabolic cross-talk in the space ecosystem by evaluating data from immune dysregulation biomarkers, metabolic profiles, and microbiota composition. The NASA OsteoOmics investigation studies gravitational regulation of osteoblast genomics and metabolism. Tissue Regeneration uses pan-omics approaches with cells cultured in bioreactors to characterize factors involved in mammalian bone tissue regeneration in microgravity. Rodent Research-3 includes an experiment that implements pan-omics to evaluate therapeutically significant molecular circuits, markers, and biomaterials associated with microgravity wound healing and tissue regeneration in bone defective rodents. The JAXA Mouse Epigenetics investigation examines molecular alterations in organ specific gene expression patterns and epigenetic modifications, and analyzes murine germ cell development during long term spaceflight. Lastly, Twins Study ("Differential effects of homozygous twin astronauts associated with differences in exposure to spaceflight factors"), NASA's first foray into human omics research, applies integrated analyses to assess biomolecular responses to physical, physiological, and environmental stressors associated with spaceflight.

Implementation of Quality Management in Core Service Laboratories

PubMed Central

Creavalle, T.; Haque, K.; Raley, C.; Subleski, M.; Smith, M.W.; Hicks, B.

2010-01-01

CF-28 The Genetics and Genomics group of the Advanced Technology Program of SAIC-Frederick exists to bring innovative genomic expertise, tools and analysis to NCI and the scientific community. The Sequencing Facility (SF) provides next generation short read (Illumina) sequencing capacity to investigators using a streamlined production approach. The Laboratory of Molecular Technology (LMT) offers a wide range of genomics core services including microarray expression analysis, miRNA analysis, array comparative genome hybridization, long read (Roche) next generation sequencing, quantitative real time PCR, transgenic genotyping, Sanger sequencing, and clinical mutation detection services to investigators from across the NIH. As the technology supporting this genomic research becomes more complex, the need for basic quality processes within all aspects of the core service groups becomes critical. The Quality Management group works alongside members of these labs to establish or improve processes supporting operations control (equipment, reagent and materials management), process improvement (reengineering/optimization, automation, acceptance criteria for new technologies and tech transfer), and quality assurance and customer support (controlled documentation/SOPs, training, service deficiencies and continual improvement efforts). Implementation and expansion of quality programs within unregulated environments demonstrates SAIC-Frederick's dedication to providing the highest quality products and services to the NIH community.

Magnetic levitation assisted aircraft take-off and landing (feasibility study - GABRIEL concept)

NASA Astrophysics Data System (ADS)

Rohacs, Daniel; Rohacs, Jozsef

2016-08-01

The Technology Roadmap 2013 developed by the International Air Transport Association envisions the option of flying without an undercarriage to be in operation by 2032. Preliminary investigations clearly indicate that magnetic levitation technology (MagLev) might be an appealing solution to assist the aircraft take-off and landing. The EU supported research project, abbreviated as GABRIEL, was dealing with (i) the concept development, (ii) the identification, evaluation and selection of the deployable magnetic levitation technology, (iii) the definition of the core system elements (including the required aircraft modifications, the ground-based system and airport elements, and the rendezvous control system), (iv) the analysis of the safety and security aspects, (v) the concept validation and (vi) the estimation of the proposed concept impact in terms of aircraft weight, noise, emission, cost-benefit). All results introduced here are compared to a medium size hypothetic passenger aircraft (identical with an Airbus A320). This paper gives a systematic overview of (i) the applied methods, (ii) the investigation of the possible use of magnetic levitation technology to assist the commercial aircraft take-off and landing processes and (iii) the demonstrations, validations showing the feasibility of the radically new concept. All major results are outlined.

Use of Novel Technologies to Identify and Investigate Molecular Markers for Ovarian Cancer Screening and Prevention

DTIC Science & Technology

1999-10-01

using the peptide assay. Initial results from the analysis reveal a high background of this assay, i.e. non -specific binding of sera to the coating...on known or suspected epidemiological risk factors for ovarian cancer, including: menstrual and reproductive history; use of exogenous hormones (oral...required to complete a review process for use of said specimens. All specimens transferred to non -Project Investigators must receive approval and/or

Use of Virtual Technology as an Intervention for Wheelchair Skills Training: A Systematic Review.

PubMed

Lam, Jean-François; Gosselin, Laurent; Rushton, Paula W

2018-03-10

To provide a comprehensive description of the current state of knowledge regarding the use of virtual technology (VT) for wheelchair skills training. The Cochrane Library, MEDLINE, CINAHL, Embase, ACM, IEEE Xplore, Inspec, and Web of Science databases were searched for relevant articles from 1990 to February 2016. We included peer-reviewed studies or long conference proceedings that examined the use of VT as a medium to provide a wheelchair skills training intervention for any population with any diagnosis using any research design. One investigator screened the titles and abstracts, then 2 investigators independently reviewed the full-text articles. Disagreements regarding inclusion were resolved by consensus or a third reviewer. Ten studies were included out of 4994 initially identified. Two investigators extracted data to systematically assess the studies' findings into 5 tables (study design and participant characteristics, equipment and technology used, intervention characteristics, outcome measures, and outcomes). Most studies demonstrated that VT wheelchair skills training showed improved outcomes (eg, simulation score, completion time, number of collisions) in the virtual environment and/or in the real world. However, subject characteristics, equipment, virtual environment, intervention tasks, and outcome measures varied across the studies. There are a variety of studies using VT as an intervention for wheelchair skills training. Given the positive outcomes for most of the studies, it appears as though VT may indeed be a solution that can help to alleviate barriers to wheelchair skills training and subsequently improve wheelchair user skill. Copyright © 2018 American Congress of Rehabilitation Medicine. All rights reserved.

The impact of new technology on surgery for colorectal cancer

PubMed Central

Makin, Gregory B; Breen, David J; Monson, John RT

2001-01-01

Advances in technology continue at a rapid pace and affect all aspects of life, including surgery. We have reviewed some of these advances and the impact they are having on the investigation and management of colorectal cancer. Modern endoscopes, with magnifying, variable stiffness and localisation capabilities are making the primary investigation of colonic cancer easier and more acceptable for patients. Imaging investigations looking at primary, metastatic and recurrent disease are shifting to digital data sets, which can be stored, reviewed remotely, potentially fused with other modalities and reconstructed as 3 dimensional (3D) images for the purposes of advanced diagnostic interpretation and computer assisted surgery. They include virtual colonoscopy, trans-rectal ultrasound, magnetic resonance imaging, positron emission tomography and radioimmunoscintigraphy. Once a colorectal carcinoma is diagnosed, the treatment options available are expanding. Colonic stents are being used to relieve large bowel obstruction, either as a palliative measure or to improve the patient’s overall condition before definitive surgery. Transanal endoscopic microsurgery and minimally invasive techniques are being used with similar outcomes and a lower mortality, morbidity and hospital stay than open trans-abdominal surgery. Transanal endoscopic microsurgery allows precise excision of both benign and early malignant lesions in the mid and upper rectum. Survival of patients with inoperable hepatic metastases following radiofrequency ablation is encouraging. Robotics and telemedicine are taking surgery well into the 21st century. Artificial neural networks are being developed to enable us to predict the outcome for individual patients. New technology has a major impact on the way we practice surgery for colorectal cancer. PMID:11819841

Bioregenerative life support: not a picnic

NASA Technical Reports Server (NTRS)

Knott, W. M.

1998-01-01

If humans are to live permanently in space, regenerative life support systems are an enabling technology and must replace the picnic approach of taking all supplies required for each mission. These systems are classified by technologies as either physical/chemical or bioregenerative. Both of these system-types can recycle water, remove carbon dioxide, produce oxygen, and recover essential elements from waste products. Bioregenerative can also produce food, thus, making it essential if humans are to exist in space independent of earth. A solely bioregenerative life support system includes plants as a biomass production module and microbial organisms in bioreactors as a resource recovery module. In the Advanced Life Support Program, bioregenerative life support systems are being investigated through a research and technology development project which includes large scale testing as part of the Breadboard Project and human tests conducted in the soon to be constructed BioPlex facility. Research and technology development efforts are directed toward optimizing biomass productivity in controlled chambers by developing light weight, energy efficient, and automated systems; recycling liquid and solid wastes; baselining the operation of bioreactors; determining system microbial stability; assessing chemical contamination; and building models required for long term system operations. The program will include space flight studies in the near future to determine if these life support technologies will function in microgravity. When a bioregenerative system is finally incorporated into a mission, the conversion from a picnic and resupply mentality to permanent recycling and independence from earth will be complete.

Passive detection of vehicle loading

NASA Astrophysics Data System (ADS)

McKay, Troy R.; Salvaggio, Carl; Faulring, Jason W.; Salvaggio, Philip S.; McKeown, Donald M.; Garrett, Alfred J.; Coleman, David H.; Koffman, Larry D.

2012-01-01

The Digital Imaging and Remote Sensing Laboratory (DIRS) at the Rochester Institute of Technology, along with the Savannah River National Laboratory is investigating passive methods to quantify vehicle loading. The research described in this paper investigates multiple vehicle indicators including brake temperature, tire temperature, engine temperature, acceleration and deceleration rates, engine acoustics, suspension response, tire deformation and vibrational response. Our investigation into these variables includes building and implementing a sensing system for data collection as well as multiple full-scale vehicle tests. The sensing system includes; infrared video cameras, triaxial accelerometers, microphones, video cameras and thermocouples. The full scale testing includes both a medium size dump truck and a tractor-trailer truck on closed courses with loads spanning the full range of the vehicle's capacity. Statistical analysis of the collected data is used to determine the effectiveness of each of the indicators for characterizing the weight of a vehicle. The final sensing system will monitor multiple load indicators and combine the results to achieve a more accurate measurement than any of the indicators could provide alone.

An integrated system for land resources supervision based on the IoT and cloud computing

NASA Astrophysics Data System (ADS)

Fang, Shifeng; Zhu, Yunqiang; Xu, Lida; Zhang, Jinqu; Zhou, Peiji; Luo, Kan; Yang, Jie

2017-01-01

Integrated information systems are important safeguards for the utilisation and development of land resources. Information technologies, including the Internet of Things (IoT) and cloud computing, are inevitable requirements for the quality and efficiency of land resources supervision tasks. In this study, an economical and highly efficient supervision system for land resources has been established based on IoT and cloud computing technologies; a novel online and offline integrated system with synchronised internal and field data that includes the entire process of 'discovering breaches, analysing problems, verifying fieldwork and investigating cases' was constructed. The system integrates key technologies, such as the automatic extraction of high-precision information based on remote sensing, semantic ontology-based technology to excavate and discriminate public sentiment on the Internet that is related to illegal incidents, high-performance parallel computing based on MapReduce, uniform storing and compressing (bitwise) technology, global positioning system data communication and data synchronisation mode, intelligent recognition and four-level ('device, transfer, system and data') safety control technology. The integrated system based on a 'One Map' platform has been officially implemented by the Department of Land and Resources of Guizhou Province, China, and was found to significantly increase the efficiency and level of land resources supervision. The system promoted the overall development of informatisation in fields related to land resource management.

The Importance of Technology Readiness in NASA Earth Venture Missions

NASA Technical Reports Server (NTRS)

Wells, James E.; Komar, George J.

2009-01-01

The first set of Venture-class investigations share the characteristic that the technology should be mature and all investigations must use mature technology that has been modeled or demonstrated in a relevant environment (Technology Readiness Level (TRL) >5). Technology Readiness Levels are a systematic metric/measurement system that supports assessments of the maturity of a particular technology and the consistent comparison of maturity between different types of technology. The TRL is used in NASA technology planning. A major step in the level of fidelity of the technology demonstration follows the completion of TRL 5. At TRL 6, a system or subsystem model or prototype must be demonstrated in a relevant environment (ground or space) representative model or prototype system or system, which would go well beyond ad hoc, "patch-cord," or discrete component level breadboarding. These TRL levels are chosen as target objectives for the Program. The challenge for offerors is that they must identify key aspects (uncertainty, multi subsystem complexity, etc) of the TRL estimate that should be properly explained in a submitted proposal. Risk minimization is a key component of the Earth Venture missions. Experiences of prior airborne missions will be shared. The discussion will address aspects of uncertainty and issues surrounding three areas of airborne earth science missions: (1) Aircraft or proposed flight platform -- Expressing the capability of the aircraft in terms of the supporting mission requirements. These issues include airplane performance characteristics (duration, range, altitude, among others) and multiship complexities. (2) Instruments -- Establishing that the instruments have been demonstrated in a relevant environment. Instruments with heritage in prior space missions meet this requirement, as do instruments tested on the ground. Evidence that the instruments have demonstrated the ability to collect data as advertised will be described. The complexity of the integration of multiple subsystems will also be addressed. Issues associated with tailoring the instrument to meet the specific Venture mission objectives must be thoroughly explained and justified. (3) Aircraft/Instrument Integration -- Explicitly defining what development may be required to harden the instrument and integrate the instrument. The challenges associated with this key aspect of major airborne earth science investigations will be presented.

Basic Research of Intrinsic Tamper Indication Markings Defined by Pulsed Laser Irradiation (Quad Chart).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moody, Neville R.

Objective: We will research how short (ns) and ultrashort (fs) laser pulses interact with the surfaces of various materials to create complex color layers and morphological patterns. Method: We are investigating the site-specific, formation of microcolor features. Also, research includes a fundamental study of the physics underlying periodic ripple formation during femtosecond laser irradiation. Status of effort: Laser induced color markings were demonstrated on an increased number of materials (including metal thin films) and investigated for optical properties and microstructure. Technology that allows for marking curved surfaces (and large areas) has been implemented. We have used electro-magnetic solvers to modelmore » light-solid interactions leading to periodic surface ripple patterns. This includes identifying the roles of surface plasmon polaritons. Goals/Milestones: Research corrosion resistance of oxide color markings (salt spray, fog, polarization tests); Through modeling, investigate effects of multi-source scattering and interference on ripple patterns; Investigate microspectrophotometry for mapping color; and Investigate new methods for laser color marking curved surfaces and large areas.« less

Integration of photovoltaic units into electric utility grids: experiment information requirements and selected issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-09-01

A number of investigations, including those conducted by The Aerospace Corporation and other contractors, have led to the recognition of technical, economic, and institutional issues relating to the interface between solar electric technologies and electric utility systems. These issues derive from three attributes of solar electric power concepts, including (1) the variability and unpredictability of the solar resources, (2) the dispersed nature of those resources which suggests the feasible deployment of small dispersed power units, and (3) a high initial capital cost coupled with relatively low operating costs. It is imperative that these integration issues be pursued in parallel withmore » the development of each technology if the nation's electric utility systems are to effectively utilize these technologies in the near to intermediate term. Analyses of three of these issues are presented: utility information requirements, generation mix and production cost impacts, and rate structures in the context of photovoltaic units integrated into the utility system. (WHK)« less

Distributed Fiber-Optic Sensors for Vibration Detection

PubMed Central

Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

2016-01-01

Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach–Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications. PMID:27472334

Distributed Fiber-Optic Sensors for Vibration Detection.

PubMed

Liu, Xin; Jin, Baoquan; Bai, Qing; Wang, Yu; Wang, Dong; Wang, Yuncai

2016-07-26

Distributed fiber-optic vibration sensors receive extensive investigation and play a significant role in the sensor panorama. Optical parameters such as light intensity, phase, polarization state, or light frequency will change when external vibration is applied on the sensing fiber. In this paper, various technologies of distributed fiber-optic vibration sensing are reviewed, from interferometric sensing technology, such as Sagnac, Mach-Zehnder, and Michelson, to backscattering-based sensing technology, such as phase-sensitive optical time domain reflectometer, polarization-optical time domain reflectometer, optical frequency domain reflectometer, as well as some combinations of interferometric and backscattering-based techniques. Their operation principles are presented and recent research efforts are also included. Finally, the applications of distributed fiber-optic vibration sensors are summarized, which mainly include structural health monitoring and perimeter security, etc. Overall, distributed fiber-optic vibration sensors possess the advantages of large-scale monitoring, good concealment, excellent flexibility, and immunity to electromagnetic interference, and thus show considerable potential for a variety of practical applications.

NASA's Plans for Materials Science on ISS: Cooperative Utilization of the MSRR-MSL

NASA Technical Reports Server (NTRS)

Chiaramonte, Francis; Szofran, Frank

2008-01-01

The ISS Research Project draws Life (non-human) and Physical Sciences investigations on the ISS, free flyer and ground-based into one coordinated project. The project has two categories: I. Exploration Research Program: a) Utilizes the ISS as a low Technology Readiness Level (TRL) test bed for technology development, demonstration and problem resolution in the areas of life support, fire safety, power, propulsion, thermal management, materials technology, habitat design, etc.; b) Will include endorsement letters from other ETDP projects to show relevancy. II. Non-Exploration Research Program; a) Not directly related to supporting the human exploration program. Research conducted in the life (non-human) and physical sciences; b) The program will sustain, to the maximum extent practicable, the United States scientific expertise and research capability in fundamental microgravity research. Physical Sciences has about 44 grants, and Life Sciences has approximately 32 grants, mostly with universities, to conduct low TRL research; this includes grants to be awarded from the 2008 Fluid Physics and Life Science NRA's.

NASA Research Center Contributions to Space Shuttle Return to Flight (SSRTF)

NASA Technical Reports Server (NTRS)

Cockrell, Charles E., Jr.; Barnes, Robert S.; Belvin, Harry L.; Allmen, John; Otero, Angel

2005-01-01

Contributions provided by the NASA Research Centers to key Space Shuttle return-to-flight milestones, with an emphasis on debris and Thermal Protection System (TPS) damage characterization, are described herein. Several CAIB recommendations and Space Shuttle Program directives deal with the mitigation of external tank foam insulation as a debris source, including material characterization as well as potential design changes, and an understanding of Orbiter TPS material characteristics, damage scenarios, and repair options. Ames, Glenn, and Langley Research Centers have performed analytic studies, conducted experimental testing, and developed new technologies, analysis tools, and hardware to contribute to each of these recommendations. For the External Tank (ET), these include studies of spray-on foam insulation (SOFI), investigations of potential design changes, and applications of advanced non-destructive evaluation (NDE) technologies to understand ET TPS shedding during liftoff and ascent. The end-to-end debris assessment included transport analysis to determine the probabilities of impact for various debris sources. For the Orbiter, methods were developed, and validated through experimental testing, to determine thresholds for potential damage of Orbiter TPS components. Analysis tools were developed and validated for on-orbit TPS damage assessments, especially in the area of aerothermal environments. Advanced NDE technologies were also applied to the Orbiter TPS components, including sensor technologies to detect wing leading edge impacts during liftoff and ascent. Work is continuing to develop certified TPS repair options and to develop improved methodologies for reinforced carbon-carbon (RCC) damage progression to assist in on-orbit repair decision philosophy.

The Long Duration Exposure Facility (LDEF) annotated bibliography

NASA Technical Reports Server (NTRS)

Levine, Arlene S.

1995-01-01

A major objective of the Space Act of 1958 which led to the establishment of the National Aeronautics and Space Administration (NASA) was the dissemination of science and technology. Today, under NASA administrator Daniel Goldin and the White House, there is a reemphasis on the dissemination and transfer of NASA science and technology to U.S. industry: both aerospace and non aerospace. The goal of this transfer of science and technology is to aid U.S. industries, making them more competitive in the global economy. After 69 months in space, LDEF provided new and important information on the space environment and how this hostile environment impacts spacecraft materials and systems. The space environment investigated by the LDEF researchers included: ionizing radiation, ultraviolet radiation, meteoroid and debris, atomic oxygen, thermal cycling, vacuum, microgravity, induced contamination and various synergistic effects. The materials used as part of LDEF and its experiments include polymers, metals, glass, paints and coatings. Fiber optic, mechanical, electrical, and optical systems were also used on LDEF. As part of the effort to disseminate and transfer LDEF science and technology, an annotated bibliographic database is being developed. This bibliography will be available electronically, as well as in hard copy. All LDEF domestic and foreign publications in the open literature, including scientific journals, the NASA LDEF Symposia volumes, books, technical reports and unrestricted contractor reports will be included in this database. The hard copy, as well as the electronic database, will be categorized by section in the scientific and technical discipline.

Initiating the 2002 Mars Science Laboratory (MSL) Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.; Henderson, Rebecca

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to investigate the Martian environment and requires new capabilities that are currently are not available. The MSL Technology Program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by JPL and is divided into a Focused Program and a Base Program. The MSL Technology Program is under the focused program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology's requirements and the development process are tightly coordinated with the Project. The MSL Technology Program combines the proven management techniques of flight projects with the commercial technology management strategies of industry and academia, to create a technology management program that meets the short-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment. This paper also provides an update of the 2003 MSL technology program and examines some of the drivers that changed the program from its initiation.

Rigorous ILT optimization for advanced patterning and design-process co-optimization

NASA Astrophysics Data System (ADS)

Selinidis, Kosta; Kuechler, Bernd; Cai, Howard; Braam, Kyle; Hoppe, Wolfgang; Domnenko, Vitaly; Poonawala, Amyn; Xiao, Guangming

2018-03-01

Despite the large difficulties involved in extending 193i multiple patterning and the slow ramp of EUV lithography to full manufacturing readiness, the pace of development for new technology node variations has been accelerating. Multiple new variations of new and existing technology nodes have been introduced for a range of device applications; each variation with at least a few new process integration methods, layout constructs and/or design rules. This had led to a strong increase in the demand for predictive technology tools which can be used to quickly guide important patterning and design co-optimization decisions. In this paper, we introduce a novel hybrid predictive patterning method combining two patterning technologies which have each individually been widely used for process tuning, mask correction and process-design cooptimization. These technologies are rigorous lithography simulation and inverse lithography technology (ILT). Rigorous lithography simulation has been extensively used for process development/tuning, lithography tool user setup, photoresist hot-spot detection, photoresist-etch interaction analysis, lithography-TCAD interactions/sensitivities, source optimization and basic lithography design rule exploration. ILT has been extensively used in a range of lithographic areas including logic hot-spot fixing, memory layout correction, dense memory cell optimization, assist feature (AF) optimization, source optimization, complex patterning design rules and design-technology co-optimization (DTCO). The combined optimization capability of these two technologies will therefore have a wide range of useful applications. We investigate the benefits of the new functionality for a few of these advanced applications including correction for photoresist top loss and resist scumming hotspots.

Initial Investigation into the Potential of CSP Industrial Process Heat for the Southwest United States

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurup, Parthiv; Turchi, Craig

2015-11-01

After significant interest in the 1970s, but relatively few deployments, the use of solar technologies for thermal applications, including enhanced oil recovery (EOR), desalination, and industrial process heat (IPH), is again receiving global interest. In particular, the European Union (EU) has been a leader in the use, development, deployment, and tracking of Solar Industrial Process Heat (SIPH) plants. The objective of this study is to ascertain U.S. market potential of IPH for concentrating collector technologies that have been developed and promoted through the U.S. Department of Energy's Concentrating Solar Power (CSP) Program. For this study, the solar-thermal collector technologies ofmore » interest are parabolic trough collectors (PTCs) and linear Fresnel (LF) systems.« less

Opportunities for development of advanced large cargo aircraft

NASA Technical Reports Server (NTRS)

Whitehead, A. H., Jr.

1976-01-01

A critical review of the history, current state of the art, and future prospects for cargo aircraft systems indicates that three of the major advantages of air cargo are rapid delivery, ability to bridge geographical boundaries, and capability to provide a flexible market response. Foreseeable advances in large aircraft development offer even greater profit potential by increasing the payload ton-miles per pound of fuel. Intermodal containers and handling systems and computerized control and billing may be key ingredients. Details of a NASA program for large aircraft systems technology are outlined, which includes systems studies, research and technology investigations, and determination of the need for critical flight experiments. Innovative advanced technologies and configuration concepts are discussed. Numerous illustrations supplement the text.

Actor-Network Theory and its role in understanding the implementation of information technology developments in healthcare.

PubMed

Cresswell, Kathrin M; Worth, Allison; Sheikh, Aziz

2010-11-01

Actor-Network Theory (ANT) is an increasingly influential, but still deeply contested, approach to understand humans and their interactions with inanimate objects. We argue that health services research, and in particular evaluations of complex IT systems in health service organisations, may benefit from being informed by Actor-Network Theory perspectives. Despite some limitations, an Actor-Network Theory-based approach is conceptually useful in helping to appreciate the complexity of reality (including the complexity of organisations) and the active role of technology in this context. This can prove helpful in understanding how social effects are generated as a result of associations between different actors in a network. Of central importance in this respect is that Actor-Network Theory provides a lens through which to view the role of technology in shaping social processes. Attention to this shaping role can contribute to a more holistic appreciation of the complexity of technology introduction in healthcare settings. It can also prove practically useful in providing a theoretically informed approach to sampling (by drawing on informants that are related to the technology in question) and analysis (by providing a conceptual tool and vocabulary that can form the basis for interpretations). We draw on existing empirical work in this area and our ongoing work investigating the integration of electronic health record systems introduced as part of England's National Programme for Information Technology to illustrate salient points. Actor-Network Theory needs to be used pragmatically with an appreciation of its shortcomings. Our experiences suggest it can be helpful in investigating technology implementations in healthcare settings.

Factors Contributing to Student Engagement in an Instructional Facebook Group for Undergraduate Mathematics

ERIC Educational Resources Information Center

Gregory, Peter L.; Gregory, Karen M.; Eddy, Erik R.

2016-01-01

This study investigates factors contributing to student engagement in an educational Facebook group. The study is based on survey results of 138 undergraduate mathematics students at a highly diverse urban public university. Survey measures included engagement in the Facebook group, access to Facebook, comfort using technology, and interest in the…

Online Technologies for Teaching Writing: Students React to Teacher Response in Voice and Written Modalities

ERIC Educational Resources Information Center

Kim, Loel

2004-01-01

English departments are increasingly under pressure to offer writing courses online, but research that informs effective pedagogies--including effective ways to respond to students' drafts--is still limited. By investigating students' perceptions of online teacher response to student writing, this study suggests that in order to develop sound…

The Development of a Virtual Marine Museum for Educational Applications

ERIC Educational Resources Information Center

Tarng, Wermhuar; Change, Mei-Yu; Ou, Kuo-Liang; Chang, Ya-Wen; Liou, Hsin-Hun

2009-01-01

The objective of this article is to investigate the computer animation and virtual reality technologies for developing a virtual marine museum. The museum consists of three exhibition areas. The first area displays fishes in freshwater, including creeks, rivers, and dams in Taiwan. The second area exhibits marine ecology and creatures of different…

A Study of E-Readiness Assessment: The Case of Three Universities in Nigeria

ERIC Educational Resources Information Center

Eweni, Samuel O.

2012-01-01

This study investigated the readiness of three higher educational institutions in Nigeria in their attempt to introduce and maintain technology-driven services to students, faculty, and support staff. The prerequisites for participation in the digital, networked economy include the affordable ICT, reliable electric supply, reliable and up-to-date…

Effects of Multimedia Vocabulary Instruction on Adolescents with Learning Disabilities

ERIC Educational Resources Information Center

Kennedy, Michael J.; Deshler, Donald D.; Lloyd, John Wills

2015-01-01

The purpose of this experimental study is to investigate the effects of using content acquisition podcasts (CAPs), an example of instructional technology, to provide vocabulary instruction to adolescents with and without learning disabilities (LD). A total of 279 urban high school students, including 30 with LD in an area related to reading, were…

Survey of Three Different Methods of Delivering Engineering Content in Lectures

ERIC Educational Resources Information Center

Lumkes, John H., Jr.

2010-01-01

There has been a rapid increase in the use of technology in university classrooms. Many university classrooms and laboratories include an overhead projection unit, computer, and connections for laptops. More recently, tablet PCs have been investigated as another way to effectively engage students in a classroom environment. This study summarizes…

Playing with Water Drops: From Wetting to Optics through Electrostatics

ERIC Educational Resources Information Center

Domps, A.; Roques-Carmes, T.

2011-01-01

We present a consistent series of activities, including experiments and basic computational studies, investigating the shape and optical properties of water drops in connection with novel technological devices. Most of the work can be carried out with simple teaching equipment and is well suited to undergraduate students. Firstly, we show how the…

Efficiency, Technology and Productivity Change in Australian Universities, 1998-2003

ERIC Educational Resources Information Center

Worthington, Andrew C.; Lee, Boon L.

2008-01-01

In this study, productivity growth in 35 Australian universities is investigated using non-parametric frontier techniques over the period 1998-2003. The five inputs included in the analysis are full-time equivalent academic and non-academic staff, non-labor expenditure and undergraduate and postgraduate student load while the six outputs are…

Analyzing Security Breaches in the U.S.: A Business Analytics Case-Study

ERIC Educational Resources Information Center

Parks, Rachida F.; Adams, Lascelles

2016-01-01

This is a real-world applicable case-study and includes background information, functional organization requirements, and real data. Business analytics has been defined as the technologies, skills, and practices needed to iteratively investigate historical performance to gain insight or spot trends. You are asked to utilize/apply critical thinking…

Investigating Diffusion with Technology

ERIC Educational Resources Information Center

Miller, Jon S.; Windelborn, Augden F.

2013-01-01

The activities described here allow students to explore the concept of diffusion with the use of common equipment such as computers, webcams and analysis software. The procedure includes taking a series of digital pictures of a container of water with a webcam as a dye slowly diffuses. At known time points, measurements of the pixel densities…

Increment cores : how to collect, handle and use them

Treesearch

Robert R. Maeglin

1979-01-01

This paper describes increment cores (a useful tool in forestry and wood technology) and their uses which include age determination, growth increment, specific gravity determination, fiber length measurements, fibril angle measurements, cell measurements, and pathological investigations. Also described is the use and care of the increment borer which is essential in...

75 FR 64776 - Initiation of Section 302 Investigation and Request for Public Comment: China-Acts, Policies and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-20

... variety of products, including wind turbines; discrimination against foreign companies and goods... production and use of energy. These are the products necessary to produce energy from wind, solar, biomass... policies to stimulate and protect its domestic producers of green technology, from wind and solar energy...

Preparation of Professional Training Teachers for Network Cooperation between Educational Establishments during Labor Preparation

ERIC Educational Resources Information Center

Tarasjuk, Olga V.; Fedulova, Ksenia A.; Fedulova, Marina A.; Kryukova, Polina S.; Yadretsov, Vyacheslav ?.

2016-01-01

Relevance of the problem being investigated is conditioned by the necessity to arrange network cooperation between educational institutions during labor force preparation in the conditions of informatization of educational and technological processes. The aim of the article is to prove the necessity of including basics of network cooperation…

Preservice Teachers Are Creating a College Culture for At-Risk Middle School Students

ERIC Educational Resources Information Center

Radcliffe, Rich; Stephens, Liz C.

2008-01-01

This mid-point report from a seven-year study about building a college culture investigates how a multifaceted approach including mentoring, technology, campus visits, parent involvement, and tutoring impacts at-risk middle school students' college aspirations and eventual success gaining college acceptance. Based on NAEP report data, many young…

Twenty-First Century Australian Women and IT: Exercising the Power of Choice

ERIC Educational Resources Information Center

Lang, Catherine

2007-01-01

This paper investigates the Australian literature relating to female under-representation in the information technology (IT) sphere of careers and education. This summary of the current body of literature presented through the lens of the nature of the discipline includes emerging theories that explore the masculinization of the discipline,…

Digital Story-Based Problem Solving Applications: Preservice Primary Teachers' Experiences and Future Integration Plans

ERIC Educational Resources Information Center

Kilic, Çigdem; Sancar-Tokmak, Hatice

2017-01-01

This case study investigates how preservice primary school teachers describe their experiences with digital story-based problem solving applications and their plans for the future integration of this technology into their teaching. Totally 113 preservice primary school teachers participated in the study. Data collection tools included a…

The Influence of Different Representations on Solving Concentration Problems at Elementary School

ERIC Educational Resources Information Center

Liu, Chia-Ju; Shen, Ming-Hsun

2011-01-01

This study investigated the students' learning process of the concept of concentration at the elementary school level in Taiwan. The influence of different representational types on the process of proportional reasoning was also explored. The participants included nineteen third-grade and eighteen fifth-grade students. Eye-tracking technology was…

Comparative international analysis of radiofrequency exposure surveys of mobile communication radio base stations

PubMed Central

Rowley, Jack T; Joyner, Ken H

2012-01-01

This paper presents analyses of data from surveys of radio base stations in 23 countries across five continents from the year 2000 onward and includes over 173,000 individual data points. The research compared the results of the national surveys, investigated chronological trends and compared exposures by technology. The key findings from this data are that irrespective of country, the year and cellular technology, exposures to radio signals at ground level were only a small fraction of the relevant human exposure standards. Importantly, there has been no significant increase in exposure levels since the widespread introduction of 3G mobile services, which should be reassuring for policy makers and negate the need for post-installation measurements at ground level for compliance purposes. There may be areas close to antennas where compliance levels could be exceeded. Future potential work includes extending the study to additional countries, development of cumulative exposure distributions and investigating the possibility of linking exposure measurements to population statistics to assess the distribution of exposure levels relative to population percentiles. PMID:22377680

Hyperpolarized Magnetic Resonance: A Novel Technique for the In Vivo Assessment of Cardiovascular Disease

PubMed Central

Schroeder, Marie A.; Clarke, Kieran; Neubauer, Stefan; Tyler, Damian J.

2011-01-01

Non-invasive imaging plays a central role in cardiovascular disease for determining diagnosis, prognosis, and optimizing patient management. Recent experimental studies have demonstrated that monitoring hyperpolarized 13C-labelled tracers with magnetic resonance imaging and spectroscopy (MRI and MRS) offers a new way to investigate the normal and diseased heart, and that the technology may be useful in patients with heart disease. In this review, we show how hyperpolarized 13C-labelled tracers are generated and have been applied experimentally, and outline the methodological advances currently underway to enable translation of hyperpolarized 13C MRI and MRS into the clinic. Using hyperpolarized 13C-labelled metabolites and metabolic MRI and MRS could help assessment of many human cardiovascular diseases, including coronary artery disease, heart failure and metabolic cardiomyopathies. We discuss the clinical areas in which the technology may, in the future, aid in the diagnosis and management of patients with cardiovascular diseases, including dynamic investigations of in vivo metabolism, coronary angiography and quantitative perfusion imaging. It is possible that, in the future, hyperpolarized magnetic resonance will play a major role in clinical cardiology. PMID:21969318

Comparative international analysis of radiofrequency exposure surveys of mobile communication radio base stations.

PubMed

Rowley, Jack T; Joyner, Ken H

2012-01-01

This paper presents analyses of data from surveys of radio base stations in 23 countries across five continents from the year 2000 onward and includes over 173,000 individual data points. The research compared the results of the national surveys, investigated chronological trends and compared exposures by technology. The key findings from this data are that irrespective of country, the year and cellular technology, exposures to radio signals at ground level were only a small fraction of the relevant human exposure standards. Importantly, there has been no significant increase in exposure levels since the widespread introduction of 3G mobile services, which should be reassuring for policy makers and negate the need for post-installation measurements at ground level for compliance purposes. There may be areas close to antennas where compliance levels could be exceeded. Future potential work includes extending the study to additional countries, development of cumulative exposure distributions and investigating the possibility of linking exposure measurements to population statistics to assess the distribution of exposure levels relative to population percentiles.

Developmental problems and their solution for the Space Shuttle main engine alternate liquid oxygen high-pressure turbopump: Anomaly or failure investigation the key

NASA Astrophysics Data System (ADS)

Ryan, R.; Gross, L. A.

1995-05-01

The Space Shuttle main engine (SSME) alternate high-pressure liquid oxygen pump experienced synchronous vibration and ball bearing life problems that were program threatening. The success of the program hinged on the ability to solve these development problems. The design and solutions to these problems are engirded in the lessons learned and experiences from prior programs, technology programs, and the ability to properly conduct failure or anomaly investigations. The failure investigation determines the problem cause and is the basis for recommending design solutions. For a complex problem, a comprehensive solution requires that formal investigation procedures be used, including fault trees, resolution logic, and action items worked through a concurrent engineering-multidiscipline team. The normal tendency to use an intuitive, cut-and-try approach will usually prove to be costly, both in money and time and will reach a less than optimum, poorly understood answer. The SSME alternate high-pressure oxidizer turbopump development has had two complex problems critical to program success: (1) high synchronous vibrations and (2) excessive ball bearing wear. This paper will use these two problems as examples of this formal failure investigation approach. The results of the team's investigation provides insight into the complexity of the turbomachinery technical discipline interacting/sensitivities and the fine balance of competing investigations required to solve problems and guarantee program success. It is very important to the solution process that maximum use be made of the resources that both the contractor and Government can bring to the problem in a supporting and noncompeting way. There is no place for the not-invented-here attitude. The resources include, but are not limited to: (1) specially skilled professionals; (2) supporting technologies; (3) computational codes and capabilities; and (4) test and manufacturing facilities.

Developmental problems and their solution for the Space Shuttle main engine alternate liquid oxygen high-pressure turbopump: Anomaly or failure investigation the key

NASA Technical Reports Server (NTRS)

Ryan, R.; Gross, L. A.

1995-01-01

The Space Shuttle main engine (SSME) alternate high-pressure liquid oxygen pump experienced synchronous vibration and ball bearing life problems that were program threatening. The success of the program hinged on the ability to solve these development problems. The design and solutions to these problems are engirded in the lessons learned and experiences from prior programs, technology programs, and the ability to properly conduct failure or anomaly investigations. The failure investigation determines the problem cause and is the basis for recommending design solutions. For a complex problem, a comprehensive solution requires that formal investigation procedures be used, including fault trees, resolution logic, and action items worked through a concurrent engineering-multidiscipline team. The normal tendency to use an intuitive, cut-and-try approach will usually prove to be costly, both in money and time and will reach a less than optimum, poorly understood answer. The SSME alternate high-pressure oxidizer turbopump development has had two complex problems critical to program success: (1) high synchronous vibrations and (2) excessive ball bearing wear. This paper will use these two problems as examples of this formal failure investigation approach. The results of the team's investigation provides insight into the complexity of the turbomachinery technical discipline interacting/sensitivities and the fine balance of competing investigations required to solve problems and guarantee program success. It is very important to the solution process that maximum use be made of the resources that both the contractor and Government can bring to the problem in a supporting and noncompeting way. There is no place for the not-invented-here attitude. The resources include, but are not limited to: (1) specially skilled professionals; (2) supporting technologies; (3) computational codes and capabilities; and (4) test and manufacturing facilities.

Combining Solar Electric Propulsion and Chemical Propulsion for Crewed Missions to Mars

NASA Technical Reports Server (NTRS)

Percy, Tom; McGuire, Melissa; Polsgrove, Tara

2015-01-01

This paper documents the results of an investigation of human Mars mission architectures that leverage near-term technology investments and infrastructures resulting from the planned Asteroid Redirect Robotic Mission (ARRM), including high-power Solar Electric Propulsion (SEP) and a human presence in Lunar Distant Retrograde Orbit (LDRO). The architectures investigated use a combination of SEP and chemical propulsion elements. Through this combination of propulsion technologies, these architectures take advantage of the high efficiency SEP propulsion system to deliver cargo, while maintaining the faster trip times afforded by chemical propulsion for crew transport. Evolved configurations of the Asteroid Redirect Vehicle (ARV) are considered for cargo delivery. Sensitivities to SEP system design parameters, including power level and propellant quantity, are presented. For the crew delivery, liquid oxygen and methane stages were designed using engines common to future human Mars landers. Impacts of various Earth departure orbits, Mars loiter orbits, and Earth return strategies are presented. The use of the Space Launch System for delivery of the various architecture elements was also investigated and launch vehicle manifesting, launch scheduling and mission timelines are also discussed. The study results show that viable Mars architecture can be constructed using LDRO and SEP in order to take advantage of investments made in the ARRM mission.

Combining Solar Electric and Chemical Propulsion for Crewed Missions to Mars

NASA Technical Reports Server (NTRS)

Percy, Tom; McGuire, Melissa; Polsgrove, Tara

2015-01-01

This paper documents the results of an investigation of human Mars mission architectures that leverage near-term technology investments and infrastructures resulting from the planned Asteroid Redirect Mission, including high-power Solar Electric Propulsion (SEP) and a human presence in Lunar Distant Retrograde Orbit (LDRO). The architectures investigated use a combination of SEP and chemical propulsion elements. Through this combination of propulsion technologies, these architectures take advantage of the high efficiency SEP propulsion system to deliver cargo, while maintaining the faster trip times afforded by chemical propulsion for crew transport. Evolved configurations of the Asteroid Redirect Vehicle (ARV) are considered for cargo delivery. Sensitivities to SEP system design parameters, including power level and propellant quantity, are presented. For the crew delivery, liquid oxygen and methane stages were designed using engines common to future human Mars landers. Impacts of various Earth departure orbits, Mars loiter orbits, and Earth return strategies are presented. The use of the Space Launch System for delivery of the various architecture elements was also investigated and launch vehicle manifesting, launch scheduling and mission timelines are also discussed. The study results show that viable Mars architecture can be constructed using LDRO and SEP in order to take advantage of investments made in the ARM mission.

Investigation of Slosh Dynamics on Flight and Ground Platforms

NASA Astrophysics Data System (ADS)

Vergalla, Michael; Zhou, Ran

The slosh dynamics in cryogenic fuel tanks under microgravity is a problem that severely affects the reliability of spacecraft launching. To investigate slosh dynamics and their effects on space vehicle dynamics three levels of testing are presently in progress. Platforms include a 3-DOF ground testing table, parabolic flights, sounding rockets and finally the International Space Station. Ground tests provide an economically viable platform for investigating rotational, translational, and coupled feed-back modes due to repeatable CNC motions. The parabolic flight campaign has conducted four successful flights aboard multiple aircraft using static and tethered slosh packages. Using the PANTHER II student designed rocket, a slosh package was launched as a payload. Finally with collaboration between Florida Institute of Technology and Massachusetts Institute of Technology SPHERES project, two test sessions investigating feedback using partially and fully filled propellant tanks have been completed aboard the In-ternational Space Station. Motion data from all tests will be input to in house Dynamic Mesh Model to further establish confidence in the versatility and accuracy of the method. The results show that it is necessary to construct additional hardware for slosh studies.

Solar thermal technical information guide

NASA Astrophysics Data System (ADS)

1985-05-01

This guide is designed to help investigators search for information in the solar thermal technology field. The information ranges from history and technology basics to the latest in research and develoment. It is written to help several audiences, including engineers and scientists who may be unfamiliar with a particular aspect of solar thermal energy, university researchers who are interested in the field, manufacturers needing to learn more about specific topics, and librarians who provide information to their clientele. The guide is divided into ten chapters, with Chapters 1 to 8 providing background on solar thermal energy development (including its history and current status) by topic. Within each topic, an overview is provided with references to relevant publications or information sources. Chapters 9 and 10 contain directories listing research centers and major technical information sources, respectively.

Evolution and advanced technology. [of Flight Telerobotic Servicer

NASA Technical Reports Server (NTRS)

Ollendorf, Stanford; Pennington, Jack E.; Hansen, Bert, III

1990-01-01

The NASREM architecture with its standard interfaces permits development and evolution of the Flight Telerobotic Servicer to greater autonomy. Technologies in control strategies for an arm with seven DOF, including a safety system containing skin sensors for obstacle avoidance, are being developed. Planning and robotic execution software includes symbolic task planning, world model data bases, and path planning algorithms. Research over the last five years has led to the development of laser scanning and ranging systems, which use coherent semiconductor laser diodes for short range sensing. The possibility of using a robot to autonomously assemble space structures is being investigated. A control framework compatible with NASREM is being developed that allows direct global control of the manipulator. Researchers are developing systems that permit an operator to quickly reconfigure the telerobot to do new tasks safely.

The CELSS Test Facility Project - An example of a CELSS flight experiment system

NASA Technical Reports Server (NTRS)

Macelroy, R. D.; Straight, C. L.

1992-01-01

The design of the facility is described in terms of its use as an investigation tool for evaluating crop growth in space with reference to required emerging technologies. NASA's CELSS Test Facility (CTF) is designed to permit the measurement of crop-plant productivity under microgravity conditions including biomass production, food production, water transpiration, and O2/CO2 exchanges. Crucial hardware tests and qualifications are identified to assure the operation of CTF technologies in space including the nutrient-delivery, water-condensation, and gas-liquid-mixing subsystems. The design concept and related scientific requirements are described and shown to provide microgravity crop research. The CTF is expected to provide data for plant research and for concepts for bioregenerative life-support systems for applications to Martian, lunar, and space-station missions.

Infrared thermal imaging in medicine.

PubMed

Ring, E F J; Ammer, K

2012-03-01

This review describes the features of modern infrared imaging technology and the standardization protocols for thermal imaging in medicine. The technique essentially uses naturally emitted infrared radiation from the skin surface. Recent studies have investigated the influence of equipment and the methods of image recording. The credibility and acceptance of thermal imaging in medicine is subject to critical use of the technology and proper understanding of thermal physiology. Finally, we review established and evolving medical applications for thermal imaging, including inflammatory diseases, complex regional pain syndrome and Raynaud's phenomenon. Recent interest in the potential applications for fever screening is described, and some other areas of medicine where some research papers have included thermal imaging as an assessment modality. In certain applications thermal imaging is shown to provide objective measurement of temperature changes that are clinically significant.

Assessment of brain-machine interfaces from the perspective of people with paralysis.

PubMed

Blabe, Christine H; Gilja, Vikash; Chestek, Cindy A; Shenoy, Krishna V; Anderson, Kim D; Henderson, Jaimie M

2015-08-01

One of the main goals of brain-machine interface (BMI) research is to restore function to people with paralysis. Currently, multiple BMI design features are being investigated, based on various input modalities (externally applied and surgically implantable sensors) and output modalities (e.g. control of computer systems, prosthetic arms, and functional electrical stimulation systems). While these technologies may eventually provide some level of benefit, they each carry associated burdens for end-users. We sought to assess the attitudes of people with paralysis toward using various technologies to achieve particular benefits, given the burdens currently associated with the use of each system. We designed and distributed a technology survey to determine the level of benefit necessary for people with tetraplegia due to spinal cord injury to consider using different technologies, given the burdens currently associated with them. The survey queried user preferences for 8 BMI technologies including electroencephalography, electrocorticography, and intracortical microelectrode arrays, as well as a commercially available eye tracking system for comparison. Participants used a 5-point scale to rate their likelihood to adopt these technologies for 13 potential control capabilities. Survey respondents were most likely to adopt BMI technology to restore some of their natural upper extremity function, including restoration of hand grasp and/or some degree of natural arm movement. High speed typing and control of a fast robot arm were also of interest to this population. Surgically implanted wireless technologies were twice as 'likely' to be adopted as their wired equivalents. Assessing end-user preferences is an essential prerequisite to the design and implementation of any assistive technology. The results of this survey suggest that people with tetraplegia would adopt an unobtrusive, autonomous BMI system for both restoration of upper extremity function and control of external devices such as communication interfaces.

Technologies to Combat Aedes Mosquitoes: A Model Based on Smart City.

PubMed

de Souza Silva, Geovanna Cristine; Peltonen, Laura-Maria; Pruinelli, Lisiane; Yoshikazu Shishido, Henrique; Jacklin Eler, Gabrielle

2018-01-01

Aedes aegypti and Aedes albopictus mosquitoes are responsible for the transmission of diseases such as dengue fever, yellow fever, chikungunya fever, zika virus fever, some of which can cause irreversible central nervous system problems and death. This study investigates what technologies are being used for combatting and monitoring the Aedes mosquitoes and to propose joining these technologies into a single and complete solution using the Smart Cities concept. A search for newscasts on Google and mobile apps in app stores were performed to identify technological solutions for combat to Aedes mosquitoes. Also, a model for joint technology was proposed. Results identified the following technologies: 170 software, two sensors, two drones, one electronic device, ten mosquito traps/lures, seven biological tools, six biotechnologies, and eight chemical formulations. Technological resources and adoption of preventive measures by the population could be a useful method for the mosquito control. Examples include a georeferenced model for identification and examination of larvae, application of chemical/biological products, real-time mapping, sending of educational materials via email or social media for the population, and alerts to health professionals in the zones of combat/risk. In combination, these technologies may indicate a better solution to the current problem.

An Investigation of the Technological Pedagogical Content Knowledge of Pre-Service Teachers

ERIC Educational Resources Information Center

Horzum, Mehmet Baris

2013-01-01

This study investigates whether pre-service teachers' learning approach and gender are related to their technological knowledge, their technological content knowledge, their technological pedagogical knowledge and their technological pedagogical content knowledge. The sample of the study consisted of 239 pre-service teachers. It was found that an…

Fuel neutralization by ozone oxidation

NASA Technical Reports Server (NTRS)

Swartz, A. B.; Agthe, R. E.; Smith, I. D.; Mulholland, J. P.

1988-01-01

The viability of a hazardous waste disposal system based on ozone oxidation of hydrazine fuels at low aqueous concentrations in the presence of ultraviolet light (UV at 2.537 x 10(exp -7) m or 8.324 x 10(exp -7) ft) excitation was investigated. Important parameters investigated include temperature, solution pH, and ultraviolet light power. Statistically relevant experimentation was done to estimate main factor effects on performance. The best available chemical analysis technology was used to evaluate the performance of the system.

An Ongoing Investigation of Science Literacy: Results of a 22-Year Study Probing Students' Knowledge and Attitude Towards Science

NASA Astrophysics Data System (ADS)

Impey, C.; Buxner, S.; Antonellis, J.; CATS

2013-04-01

This talk presents findings related to our ongoing work investigating students' knowledge and attitudes towards science and technology. We present an overview of research studies and findings including a comparison of the science literacy measures of University of Arizona students compared to national studies, conceptions related to astrology, views of radiation, and students' pseudoscience and religious beliefs. We discuss implications for instructors and researchers interested in improving students' science literacy scores and diagnosing alternative beliefs.

On Human Resource Diversity in Distributed Energy Technology

NASA Technical Reports Server (NTRS)

Kalu, A.; Emrich, C.; Ventre, G.; Acosta, Roberto J.

2003-01-01

The purpose of this Historically Black Colleges and Universities (HBCUs/OMUs) Research Conference was to provide an opportunity for principal investigators and their students to present research progress reports. The abstracts included in this report indicate the range and quality of research topics such as aeropropulsion, space propulsion, space power, fluid dynamics, designs, structures and materials being funded through grants from Glenn Research Center to HBCUs. The conference generated extensive networking between students, principal investigators, Glenn technical monitors, and other Glenn researchers.

Income and Technology as Drivers of Australian Healthcare Expenditures.

PubMed

You, Xiaohui; Okunade, Albert A

2017-07-01

The roles of income and technology as the major determinants of aggregate healthcare expenditure (HEXP) continue to interest economists and health policy researchers. Concepts and measures of medical technologies remain complex; however, income (on the demand side) and technology (on the supply side) are important drivers of HEXP. This paper presents analysis of Australia's HEXP, using time-series econometrics modeling techniques applied to 1971-2011 annual aggregate data. Our work fills two important gaps in the literature. First, we model the determinants of Australia's HEXP using the latest and longest available data series. Second, this novel study investigates several alternative technology proxies (input and output measures), including economy-wide research and development expenditures, hospital research expenditures, mortality rate, and two technology indexes based on medical devices. We then apply the residual component method and the technology proxy approach to quantify the technology effects on HEXP. Our empirical results suggest that Australian aggregate healthcare is a normal good and a technical necessity with the income elasticity estimates ranging from 0.51 to 0.97, depending on the model. The estimated technology effects on HEXP falling in the 0.30-0.35 range and mimicking those in the literature using the US data, reinforce the global spread of healthcare technology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

2003 NASA Seal/Secondary Air System Workshop. Volume 1

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M. (Editor); Hendricks, Robert C. (Editor)

2004-01-01

The following reports were included in the 2003 NASA Seal/Secondary Air System Workshop:Low Emissions Alternative Power (LEAP); Overview of NASA Glenn Seal Developments; NASA Ultra Efficient Engine Technology Project Overview; Development of Higher Temperature Abradable Seals for Industrial Gas Turbines; High Misalignment Carbon Seals for the Fan Drive Gear System Technologies; Compliant Foil Seal Investigations; Test Rig for Evaluating Active Turbine Blade Tip Clearance Control Concepts; Controls Considerations for Turbine Active Clearance Control; Non-Contacting Finger Seal Developments and Design Considerations; Effect of Flow-Induced Radial Load on Brush Seal/Rotor Contact Mechanics; Seal Developments at Flowserve Corporation; Investigations of High Pressure Acoustic Waves in Resonators With Seal-Like Features; Numerical Investigations of High Pressure Acoustic Waves in Resonators; Feltmetal Seal Material Through-Flow; "Bimodal" Nuclear Thermal Rocket (BNTR) Propulsion for Future Human Mars Exploration Missions; High Temperature Propulsion System Structural Seals for Future Space Launch Vehicles; Advanced Control Surface Seal Development for Future Space Vehicles; High Temperature Metallic Seal Development for Aero Propulsion and Gas Turbine Applications; and BrazeFoil Honeycomb.

A survey of enabling technologies in synthetic biology

PubMed Central

2013-01-01

Background Realizing constructive applications of synthetic biology requires continued development of enabling technologies as well as policies and practices to ensure these technologies remain accessible for research. Broadly defined, enabling technologies for synthetic biology include any reagent or method that, alone or in combination with associated technologies, provides the means to generate any new research tool or application. Because applications of synthetic biology likely will embody multiple patented inventions, it will be important to create structures for managing intellectual property rights that best promote continued innovation. Monitoring the enabling technologies of synthetic biology will facilitate the systematic investigation of property rights coupled to these technologies and help shape policies and practices that impact the use, regulation, patenting, and licensing of these technologies. Results We conducted a survey among a self-identifying community of practitioners engaged in synthetic biology research to obtain their opinions and experiences with technologies that support the engineering of biological systems. Technologies widely used and considered enabling by survey participants included public and private registries of biological parts, standard methods for physical assembly of DNA constructs, genomic databases, software tools for search, alignment, analysis, and editing of DNA sequences, and commercial services for DNA synthesis and sequencing. Standards and methods supporting measurement, functional composition, and data exchange were less widely used though still considered enabling by a subset of survey participants. Conclusions The set of enabling technologies compiled from this survey provide insight into the many and varied technologies that support innovation in synthetic biology. Many of these technologies are widely accessible for use, either by virtue of being in the public domain or through legal tools such as non-exclusive licensing. Access to some patent protected technologies is less clear and use of these technologies may be subject to restrictions imposed by material transfer agreements or other contract terms. We expect the technologies considered enabling for synthetic biology to change as the field advances. By monitoring the enabling technologies of synthetic biology and addressing the policies and practices that impact their development and use, our hope is that the field will be better able to realize its full potential. PMID:23663447

USD Catalysis Group for Alternative Energy - Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoefelmeyer, James

2014-10-03

I. Project Summary Catalytic processes are a major technological underpinning of modern society, and are essential to the energy sector in the processing of chemical fuels from natural resources, fine chemicals synthesis, and energy conversion. Advances in catalyst technology are enormously valuable since these lead to reduced chemical waste, reduced energy loss, and reduced costs. New energy technologies, which are critical to future economic growth, are also heavily reliant on catalysts, including fuel cells and photo-electrochemical cells. Currently, the state of South Dakota is underdeveloped in terms of research infrastructure related to catalysis. If South Dakota intends to participate inmore » significant economic growth opportunities that result from advances in catalyst technology, then this area of research needs to be made a high priority for investment. To this end, a focused research effort is proposed in which investigators from The University of South Dakota (USD) and The South Dakota School of Mines and Technology (SDSMT) will contribute to form the South Dakota Catalysis Group (SDCG). The multidisciplinary team of the (SDCG) include: (USD) Dan Engebretson, James Hoefelmeyer, Ranjit Koodali, and Grigoriy Sereda; (SDSMT) Phil Scott Ahrenkiel, Hao Fong, Jan Puszynski, Rajesh Shende, and Jacek Swiatkiewicz. The group is well suited to engage in a collaborative project due to the resources available within the existing programs. Activities within the SDCG will be monitored through an external committee consisting of three distinguished professors in chemistry. The committee will provide expert advice and recommendations to the SDCG. Advisory meetings in which committee members interact with South Dakota investigators will be accompanied by individual oral and poster presentations in a materials and catalysis symposium. The symposium will attract prominent scientists, and will enhance the visibility of research in the state of South Dakota. The SDCG requests funding through the Department of Energy (DoE) to establish this multidisciplinary research cluster in the area of catalysis. This long-term approach includes synthesis, characterization, catalyst evaluation, modeling, and scale-up. The project includes plans to acquire instrumentation critical to enabling competitive research. These acquisitions will complement existing resources in the state. The effect of implementation of the proposed efforts will be to significantly enhance state infrastructure in personnel and equipment, and lead to a nationally and internationally recognized research center.« less

Emerging Non-Cancer Applications of Therapeutic Ultrasound

PubMed Central

O’Reilly, Meaghan A.; Hynynen, Kullervo

2015-01-01

Ultrasound therapy has been investigated for over half a century. Ultrasound can act on tissue through a variety of mechanisms, including thermal, shockwave and cavitation mechanisms, and through these can elicit different responses. Ultrasound therapy can provide a non-invasive or minimally invasive treatment option, and ultrasound technology has advanced to the point where devices can be developed to investigate a wide range of applications. This review focuses on non-cancer, clinical applications of therapeutic ultrasound, with an emphasis on treatments that have recently reached clinical investigations, and preclinical research programs that have great potential to impact patient care. PMID:25792225

[Standard Cancer Therapy Are Established by the Investigator-Initiated Post-Marketing Clinical Trials, Not by the Indication-Directed Clinical Trials].

PubMed

Shimada, Yasuhiro

2016-04-01

The financial supports for investigator-initiated post-marketing clinical trial in clinical oncology are reduced after scandals related to the other fields of clinical trials in Japan. These clinical trials are the essential final steps of clinical development in newer cancer therapy, which should be conducted in the investigator-initiated clinical trial groups with well-organized infrastructure and continuous financial supports. The present problems are discussed and summarized. Future perspectives with the national viewpoints needed to be included the idea of "health technology assessment".

Production of recombinant protein G through high-density fermentation of engineered bacteria as well as purification.

PubMed

Zhang, Hu-Cheng; Yang, Jun; Yang, Guo-Wei; Wang, Xiao-Jie; Fan, Hai-Tao

2015-08-01

Recombinant Streptococcus Protein G (PG) is a cell wall protein, which, when combined with mammal immunoglobulin, is used in separating antibody technology. High-density fermentation technologies using an engineered recombinant PG-producing bacteria as well as PG separation and purification technologies have a direct impact on the availability and application of PG. Through primary and secondary seed cultivation, a recombinant E. coli strain was subjected to high-density fermentation with controlled feed supplement concentration under stimulation with isopropyl β-D-1-thiogalactopyranoside. The present study investigated the effect of factors including inoculum size, oxygen levels, pH and the cultivating method on the fermentation process, as well as the effect of the separation and purification technologies, including ultrasonication, nickel column affinity chromatography, Sephadex G-25 gel filtration chromatography and diethylaminoethanol-sepharose fast flow ion exchange chromatography on the yield and purity of PG. The efficiency of extraction was detected using SDS-PAGE. High-density fermentation yielded 80-150 g/l of bacteria and 1 g PG was obtained from one liter broth. The present study delivered a highly efficient novel method via which PG can be obtained at a high concentration and a purity >95%.

Light-field and holographic three-dimensional displays [Invited].

PubMed

Yamaguchi, Masahiro

2016-12-01

A perfect three-dimensional (3D) display that satisfies all depth cues in human vision is possible if a light field can be reproduced exactly as it appeared when it emerged from a real object. The light field can be generated based on either light ray or wavefront reconstruction, with the latter known as holography. This paper first provides an overview of the advances of ray-based and wavefront-based 3D display technologies, including integral photography and holography, and the integration of those technologies with digital information systems. Hardcopy displays have already been used in some applications, whereas the electronic display of a light field is under active investigation. Next, a fundamental question in this technology field is addressed: what is the difference between ray-based and wavefront-based methods for light-field 3D displays? In considering this question, it is of particular interest to look at the technology of holographic stereograms. The phase information in holography contributes to the resolution of a reconstructed image, especially for deep 3D images. Moreover, issues facing the electronic display system of light fields are discussed, including the resolution of the spatial light modulator, the computational techniques of holography, and the speckle in holographic images.

Motor Drive Technologies for the Power-by-Wire (PBW) Program: Options, Trends and Tradeoffs

NASA Technical Reports Server (NTRS)

Elbuluk, Malik E.; Kankam, M. David

1995-01-01

Power-By-Wire (PBW) is a program involving the replacement of hydraulic and pneumatic systems currently used in aircraft with an all-electric secondary power system. One of the largest loads of the all-electric secondary power system will be the motor loads which include pumps, compressors and Electrical Actuators (EA's). Issues of improved reliability, reduced maintenance and efficiency, among other advantages, are the motivation for replacing the existing aircraft actuators with electrical actuators. An EA system contains four major components. These are the motor, the power electronic converters, the actuator and the control system, including the sensors. This paper is a comparative literature review in motor drive technologies, with a focus on the trends and tradeoffs involved in the selection of a particular motor drive technology. The reported research comprises three motor drive technologies. These are the induction motor (IM), the brushless dc motor (BLDCM) and the switched reluctance motor (SRM). Each of the three drives has the potential for application in the PBW program. Many issues remain to be investigated and compared between the three motor drives, using actual mechanical loads expected in the PBW program.

The good field trip: How elementary students from diverse socio-economic backgrounds learn science, art, and technology at a museum

NASA Astrophysics Data System (ADS)

Martell, Sandra Toro

The Good Field Trip is a study that uses an ethnographic approach to answer the question of what learning looks like during a field trip to a museum. The study uses the Contextual Model of Learning (Falk & Dierking, 2000) to investigate elementary students' personal, physical, and sociocultural contexts of learning as well as how time affects students' thoughts and feelings about the experience. The author accompanied a group of eight students on a three and a half day camp-like experience to a museum that promotes environmental stewardship and the integration of art, science, and technology use and learning. The author videotaped the students' conversations and experiences and interviewed students before, during, and after the trip. Analyses of the videotapes were supplemented with student documents, including comic books, journal notes, and reflective essays about the trip. Findings include that not all experiences are marked as science, art, and technology; technology use does not occur; art is presented in a more formalized manner than science, which is composed of observation and the acquisition of knowledge about plants and animals; and conversations and activities resemble traditional modes of learning in school settings.

The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

PubMed

Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

2015-11-30

The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

Life Cycle Analysis of Dedicated Nano-Launch Technologies

NASA Technical Reports Server (NTRS)

Zapata, Edgar; McCleskey, Carey (Editor); Martin, John; Lepsch, Roger; Ternani, Tosoc

2014-01-01

Recent technology advancements have enabled the development of small cheap satellites that can perform useful functions in the space environment. Currently, the only low cost option for getting these payloads into orbit is through ride share programs - small satellites awaiting the launch of a larger satellite, and then riding along on the same launcher. As a result, these small satellite customers await primary payload launches and a backlog exists. An alternative option would be dedicated nano-launch systems built and operated to provide more flexible launch services, higher availability, and affordable prices. The potential customer base that would drive requirements or support a business case includes commercial, academia, civil government and defense. Further, NASA technology investments could enable these alternative game changing options. With this context, in 2013 the Game Changing Development (GCD) program funded a NASA team to investigate the feasibility of dedicated nano-satellite launch systems with a recurring cost of less than $2 million per launch for a 5 kg payload to low Earth orbit. The team products would include potential concepts, technologies and factors for enabling the ambitious cost goal, exploring the nature of the goal itself, and informing the GCD program technology investment decision making process. This paper provides an overview of the life cycle analysis effort that was conducted in 2013 by an inter-center NASA team. This effort included the development of reference nano-launch system concepts, developing analysis processes and models, establishing a basis for cost estimates (development, manufacturing and launch) suitable to the scale of the systems, and especially, understanding the relationship of potential game changing technologies to life cycle costs, as well as other factors, such as flights per year.

Genetic Tools for Self-Organizing Culture of Mouse Embryonic Stem Cells via Small Regulatory RNA-Mediated Technologies, CRISPR/Cas9, and Inducible RNAi.

PubMed

Takata, Nozomu; Sakakura, Eriko; Sakuma, Tetsushi; Yamamoto, Takashi

2017-01-01

Approaches to investigate gene functions in experimental biology are becoming more diverse and reliable. Furthermore, several kinds of tissues and organs that possess their original identities can be generated in petri dishes from stem cells including embryonic, adult and induced pluripotent stem cells. Researchers now have several choices of experimental methods and their combinations to analyze gene functions in various biological systems. Here, as an example we describe one of the better protocols, which combines three-dimensional embryonic stem cell culture with small regulatory RNA-mediated technologies, clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9), and inducible RNA interference (RNAi). This protocol allows investigation of genes of interest to better understand gene functions in target tissues (or organs) during in vitro development.

Gender Differences in Attitudes Toward Science and Technology Among Majors

NASA Astrophysics Data System (ADS)

Gokhale, Anu A.; Rabe-Hemp, Cara; Woeste, Lori; Machina, Kenton

2015-08-01

In the USA, women have consistently been proportionally underrepresented in science and technology (S&T). In these disciplines, as students move from high schools to colleges to graduate programs, qualified women drop out at higher rates than do men, resulting in a striking loss of talented students. Attitude toward a discipline is one of the major factors in students' choice of majors. As a result, attitudes toward S&T are issues with longstanding attention and interest in education research. Retention of female students in S&T majors remains a major concern. The purpose of the study was to investigate attitudes toward S&T including attitudes toward female participation in S&T, among S&T majors, and examine differences by gender and class standing. Such an investigation would provide deeper insights to help devise strategies to retain women in S&T majors.

8th Spacecraft Charging Technology Conference

NASA Technical Reports Server (NTRS)

Minor, J. L. (Compiler)

2004-01-01

The 8th Spacecraft Charging Technology Conference was held in Huntsville, Alabama, October 20-24, 2003. Hosted by NASA s Space Environments and Effects (SEE) Program and co-sponsored by the Air Force Research Laboratory (AFRL) and the European Space Agency (ESA), the 2003 conference saw attendance from eleven countries with over 65 oral papers and 18 poster papers. Presentation topics highlighted the latest in spacecraft charging mitigation techniques and on-orbit investigations, including: Plasma Propulsion and Tethers; Ground Testing Techniques; Interactions of Spacecraft and Systems With the Natural and Induced Plasma Environment; Materials Characterizations; Models and Computer Simulations; Environment Specifications; Current Collection and Plasma Probes in Space Plasmas; On-Orbit Investigations. A round-table discussion of international standards regarding electrostatic discharge (ESD) testing was also held with the promise of continued discussions in the off years and an official continuation at the next conference.

Overview of the Microgravity Science Glovebox (MSG)

NASA Technical Reports Server (NTRS)

Wright, Mary Etta

1999-01-01

MSG is a third generation glovebox for Microgravity Science investigations: SpaceLab Glovebox (GBX); Middeck/MIR Gloveboxes (M/MGBX); and GBX and M/MGBX developed by Bradford Engineering (NL). Previous flights have demonstrated utility of glovebox facilities: Contained environment enables broader range of science experiments; Affords better control of video and photographic imaging (a prime data source); Provides better environmental control than cabin atmosphere; and Useful for contingency operations. MSG developed in response to demands for increased work volume, increased capabilities and additional resources. MSG is multi-user facility to support a wide range of small science and technology investigations: Fluid physics; Combustion science; Material science; Biotechnology (cell culturing and protein crystal growth); Space processing; Fundamental physics; and Technology demonstrations. Topics included in this viewgraph are: MSG capabilities; MSG hardware items; MSG, GSE, and OSE items; MSG development approach; and Science utilization.

Design and Development of Lightweight Composite Tanks for the Mars Ascent Propulsion Technology

NASA Technical Reports Server (NTRS)

Estrada, Hector

1999-01-01

The investigation presented here focuses on the design and development of lightweight composite tanks for the Mars ascent propulsion technology. The proposed tanks are fabricated using the filament winding technique. The tanks will be used in the experimental permeability characterization of composite pressure vessels pressurized using cryogenic and kerosene fluids. We considered the geometry and composite material tailorability in the preliminary design formulation to obtain an isotensoid tank. The design formulation is based on membrane shell analysis. The tanks also include circular openings at the apex of the end caps for the installation of polar bosses. The development of a polar boss system was also investigated, and led to an innovative polar boss system that applies a uniform pressure on the o-ring gaskets. The permeability of these tanks was also considered and recommendations for improvement are presented.

Development of selected advanced aerodynamics and active control concepts for commercial transport aircraft

NASA Technical Reports Server (NTRS)

Taylor, A. B.

1984-01-01

Work done under the Energy Efficient Transport project in the field of advanced aerodynamics and active controls is summarized. The project task selections focused on the following: the investigation of long-duct nacelle shape variation on interference drag; the investigation of the adequacy of a simple control law for the elastic modes of a wing; the development of the aerodynamic technology at cruise and low speed of high-aspect-ratio supercritical wings of high performance; and the development of winglets for a second-generation jet transport. All the tasks involved analysis and substantial wind tunnel testing. The winglet program also included flight evaluation. It is considered that the technology base has been built for the application of high-aspect-ratio supercritical wings and for the use of winglets on second-generation transports.

Mobile health requires mobile security: challenges, solutions, and standardization.

PubMed

Pharow, Peter; Blobel, Bernd

2008-01-01

Extended communication and advanced cooperation in a permanently growing healthcare and welfare domain require a well-defined set of security services provided by an interoperable security infrastructure based on international and European standards. Any communication and collaboration procedure requires a purpose. But such legal purpose-binding is definitely not the only aspect to carefully be observed and investigated. More and more, aspects of security, safety, privacy, ethics, and quality reach importance while discussing about future-proof health information systems and health networks - regardless whether local, regional or even pan-European networks. During the course of the current paradigm change from an organization-centered to a process-related and to a person-centered health system, different new technologies including mobile solutions need to be applied in order to meet challenges arising from both legal and technical circumstances. Beside the typical Information and Communication Technology systems and applications, the extended use of modern technologies includes large medical devices like, e.g., MRI and CT but also small devices like sensors worn by a person or included in clothing. Security and safety are on top of the priority list. The paper addresses the identification of some specific aspects like mobile technology and safety when moving both IT and people towards mobile health aiming at increasing citizens and patients awareness, confidence, and acceptance in future mobile care - a world often still beyond the horizon.

Application of forensic DNA testing in the legal system.

PubMed

Primorac, D; Schanfield, M S

2000-03-01

DNA technology has taken an irreplaceable position in the field of the forensic sciences. Since 1985, when Peter Gill and Alex Jeffreys first applied DNA technology to forensic problems, to the present, more than 50,000 cases worldwide have been solved through the use of DNA based technology. Although the development of DNA typing in forensic science has been extremely rapid, today we are witnessing a new era of DNA technology including automation and miniaturization. In forensic science, DNA analysis has become "the new form of scientific evidence" and has come under public scrutiny and the demand to show competence. More and more courts admit the DNA based evidence. We believe that in the near future this technology will be generally accepted in the legal system. There are two main applications of DNA analysis in forensic medicine: criminal investigation and paternity testing. In this article we present background information on DNA, human genetics, and the application of DNA analysis to legal problems, as well as the commonly applied respective mathematics.

Recent Progress in Engine Noise Reduction Technologies

NASA Technical Reports Server (NTRS)

Huff, Dennis; Gliebe, Philip

2003-01-01

Highlights from NASA-funded research over the past ten years for aircraft engine noise reduction are presented showing overall technical plans, accomplishments, and selected applications to turbofan engines. The work was sponsored by NASA's Advanced Subsonic Technology (AST) Noise Reduction Program. Emphasis is given to only the engine noise reduction research and significant accomplishments that were investigated at Technology Readiness Levels ranging from 4 to 6. The Engine Noise Reduction sub-element was divided into four work areas: source noise prediction, model scale tests, engine validation, and active noise control. Highlights from each area include technologies for higher bypass ratio turbofans, scarf inlets, forward-swept fans, swept and leaned stators, chevron/tabbed nozzles, advanced noise prediction analyses, and active noise control for fans. Finally, an industry perspective is given from General Electric Aircraft Engines showing how these technologies are being applied to commercial products. This publication contains only presentation vu-graphs from an invited lecture given at the 41st AIAA Aerospace Sciences Meeting, January 6-9, 2003.

Smart Technology in Lung Disease Clinical Trials.

PubMed

Geller, Nancy L; Kim, Dong-Yun; Tian, Xin

2016-01-01

This article describes the use of smart technology by investigators and patients to facilitate lung disease clinical trials and make them less costly and more efficient. By "smart technology" we include various electronic media, such as computer databases, the Internet, and mobile devices. We first describe the use of electronic health records for identifying potential subjects and then discuss electronic informed consent. We give several examples of using the Internet and mobile technology in clinical trials. Interventions have been delivered via the World Wide Web or via mobile devices, and both have been used to collect outcome data. We discuss examples of new electronic devices that recently have been introduced to collect health data. While use of smart technology in clinical trials is an exciting development, comparison with similar interventions applied in a conventional manner is still in its infancy. We discuss advantages and disadvantages of using this omnipresent, powerful tool in clinical trials, as well as directions for future research. Published by Elsevier Inc.

Biological Conversion of Sugars to Hydrocarbons Technology Pathway

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davis, Ryan; Biddy, Mary J.; Tan, Eric

2013-03-31

In support of the Bioenergy Technologies Office, the National Renewable Energy Laboratory (NREL) and the Pacific Northwest National Laboratory (PNNL) are undertaking studies of biomass conversion technologies to identify barriers and target research toward reducing conversion costs. Process designs and preliminary economic estimates for each of these pathway cases were developed using rigorous modeling tools (Aspen Plus and Chemcad). These analyses incorporated the best information available at the time of development, including data from recent pilot and bench-scale demonstrations, collaborative industrial and academic partners, and published literature and patents. This technology pathway case investigates the biological conversion of biomass derivedmore » sugars to hydrocarbon biofuels, utilizing data from recent literature references and information consistent with recent pilot scale demonstrations at NREL. Technical barriers and key research needs have been identified that should be pursued for the pathway to become competitive with petroleum-derived gasoline, diesel and jet range hydrocarbon blendstocks.« less

Adaptive smart wing design for military aircraft: requirements, concepts, and payoffs

NASA Astrophysics Data System (ADS)

Kudva, Jayanth N.; Appa, Kari; Van Way, Craig B.; Lockyer, Allen J.

1995-05-01

New developments in smart structures and materials have made it possible to revisit earlier work in adaptive and flexible wing technology, and remove some of the limitations for technology transition to next-generation aircraft. Research performed by Northrop Grumman, under internal funding, has led to a new program sponsored by ARPA to investigate the application of smart structures and materials technologies to twist and adapt and aircraft wing. Conceptual designs are presented based on state-of-the-art materials, including shape memory alloys, piezoelectrics, and fiber optic sensors for incorporation in a proposed smart wing design. Plans are described to demonstrate proof-of-concept on a prototype 1/10 scale -18 model that will be tested in a wind tunnel for final validation. Highlights of the proposed program are summarized with respect to program objectives, requirements, key concept design features, demonstration testing, and smart wing technology payoffs and risks.

Sodium-NaK engineering handbook. Volume III. Sodium systems, safety, handling, and instrumentation. [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foust, O J

1978-01-01

The handbook is intended for use by present and future designers in the Liquid Metals Fast Breeder Reactor (LMFBR) Program and by the engineering and scientific community performing other type investigation and exprimentation requiring high-temperature sodium and NaK technology. The arrangement of subject matter progresses from a technological discussion of sodium and sodium--potassium alloy (NaK) to discussions of varius categories and uses of hardware in sodium and NaK systems. Emphasis is placed on sodium and NaK as heat-transport media. Sufficient detail is included for basic understanding of sodium and NaK technology and of technical aspects of sodium and NaK componentsmore » and instrument systems. Information presented is considered adequate for use in feasibility studies and conceptual design, sizing components and systems, developing preliminary component and system descriptions, identifying technological limitations and problem areas, and defining basic constraints and parameters.« less

Communication and Technology in Genetic Counseling for Familial Cancer

PubMed Central

Lynch, Henry T.; Snyder, Carrie; Stacey, Mark; Olson, Brooke; Peterson, Susan; Buxbaum, Sarah; Shaw, Trudy; Lynch, Patrick

2015-01-01

When a cancer predisposing germline mutation is detected in an index case, the presence of the underlying syndrome is confirmed and the potential for predictive testing of at-risk relatives is established. However, the reporting of a positive family history does not routinely lead to communication of information about risk to close, much less distant relatives. This review summarizes information technology utilized to address penetration or “reach” of knowledge of risk within extended families, including the use of telephone and video counseling to reach distant patients, and anticipate novel internet-based processes for communication between investigators and relatives. PMID:24355094

The Contradictions of Telehealth User Experience in Chronic Obstructive Pulmonary Disease (COPD): A Qualitative Meta-Synthesis.

PubMed

Brunton, Lisa; Bower, Peter; Sanders, Caroline

2015-01-01

As the global burden of chronic disease rises, policy makers are showing a strong interest in adopting telehealth technologies for use in long term condition management, including COPD. However, there remain barriers to its implementation and sustained use. To date, there has been limited qualitative investigation into how users (both patients/carers and staff) perceive and experience the technology. We aimed to systematically review and synthesise the findings from qualitative studies that investigated user perspectives and experiences of telehealth in COPD management, in order to identify factors which may impact on uptake. Systematic review and meta-synthesis of published qualitative studies of user (patients, their carers and clinicians) experience of telehealth technologies for the management of Chronic Obstructive Pulmonary Disease. ASSIA, CINAHL, Embase, Medline, PsychInfo and Web of Knowledge databases were searched up to October 2014. Reference lists of included studies and reference lists of key papers were also searched. Quality appraisal was guided by an adapted version of the CASP qualitative appraisal tool. 705 references (after duplicates removed) were identified and 10 papers, relating to 7 studies were included in the review. Most authors of included studies had identified both positive and negative experiences of telehealth use in the management of COPD. Through a line of argument synthesis we were able to derive new insights from the data to identify three overarching themes that have the ability to either impede or promote positive user experience of telehealth in COPD: the influence on moral dilemmas of help seeking-(enables dependency or self-care); transforming interactions (increases risk or reassurance) and reconfiguration of 'work' practices (causes burden or empowerment). Findings from this meta-synthesis have implications for the future design and implementation of telehealth services. Future research needs to include potential users at an earlier stage of telehealth/service development.

Preliminary Investigation of Impact of Technological Impairment on Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

Sankararaman, Shankar; Roychoudhury, Indranil; Zhang, Xiaoge; Goebel, Kai

2017-01-01

The Next Generation Air Transportation System (NextGen) incorporates collaborative air traffic management and Trajectory-Based Operations (TBO) in order to significantly increase the capacity, efficiency, and predictability of operations in the National Airspace System (NAS), without decreasing safety. This is enabled by airspace users and service providers sharing knowledge about operations that allows prediction of the complete 4D flight trajectory with as little uncertainty as possible. Additionally, new software and hardware technology is critical to reaching NextGen goals, especially with regard to TBO. What if the technologies that are critical for TBO were to be impaired or fail completely? Should there be a malfunction of a piece of the technology, it must be ensured that the whole system does not break down completely or suffer severe impairment. Instead, operations need to be maintained proportionally to the problem and safety needs to be ensured (graceful degradation). This paper proposes a systematic framework to investigate the vulnerability of TBO to technology disruption, and determine the impact of technological impairment on TBO. Two representative technologies are chosen for detailed investigation and the impact of their impairment on the degradation of TBO is illustrated using a weather-related scenario. XXXX There are several possible directions of future work. We believe it is desirable to develop methods to quantitatively assess the impact of technological disruption on TBO and to have the simulation tools to validate the impact. The availability of prognostics and health management methods could be leveraged to predict technological failure/disruption, thus predicting how TBO will be a ected, and possibly pro-actively mitigating the impact. It is important to develop large-scale scenarios where the e ect of technological impairment is prominent, and identify methods to quantitatively assess the extent of TBO degradation. An important goal of such an investigation is the development of failure-resistant resilient trajectory-based oper- ations. Resilience14, 15 is the property of a system to \\bounce back" and resume at least a signi cant portion of its functionalities after degradation due to technological impairment(s). A systems resilience includes properties such as \\bu ering capacity" (quantifying disruptions the system can absorb or adapt to without a fundamental breakdown in performance or in the systems structure), \\ exibility" (ability to restructure itself in response to external changes or pressures), "margin" (how closely the system is currently operating rela- tive to one or another kind of performance boundary), \\tolerance" (whether the system gracefully degrades as stress/pressure increase, or collapses quickly when pressure exceeds adaptive capacity), etc. Future work needs to focus on quantifying and improving the resilience of TBO, and identifying resilient design solutions for aviation.

Technology concept in the view of Iranian nurses.

PubMed

Mehraban, Marzieh Adel; Hassanpour, Marzieh; Yazdannik, Ahmadreza; Ajami, Sima

2013-05-01

Over the years, the concept technology has modified, especially from the viewpoint of the development of scientific knowledge as well as the philosophical and artistic aspects. However, the concept of technology in nursing are still poorly understood. Only small qualitative studies, especially in Iran, have investigated this phenomenon and they just are about information technology. The aim of this study is to gain a better understanding of the concept of technology in the view of Iranian nurses. This study was qualitative explorative study which was done with a purposeful sampling of 23 nurses (staffs, supervisors and chief nurse managers) working in Isfahan hospitals. Unstructured interviews were including 13 individual interviews and 2 focused-group interviews. In addition to this, filed notes and memos were used in data collection. After this data transcribing was done and then conventional content analysis was used for data coding and classification. The results showed that there are various definitions for technology among nurses. In the view of nurses, technology means using new equipment, computers, information technology, etc). Data analysis revealed that nurses understand technology up to three main concepts: Change, Equipment and Knowledge. In deep overview on categories, we found that the most important concept about technology in nursing perspective is equipment. Therefore, it is necessary to develop deep understanding about the possible concepts technology among nurses. We suppose that technology concepts must be defined separately in all disciplines.

Examining the Effect of Enactment of a Geospatial Curriculum on Students' Geospatial Thinking and Reasoning

NASA Astrophysics Data System (ADS)

Bodzin, Alec M.; Fu, Qiong; Kulo, Violet; Peffer, Tamara

2014-08-01

A potential method for teaching geospatial thinking and reasoning (GTR) is through geospatially enabled learning technologies. We developed an energy resources geospatial curriculum that included learning activities with geographic information systems and virtual globes. This study investigated how 13 urban middle school teachers implemented and varied the enactment of the curriculum with their students and investigated which teacher- and student-level factors accounted for students' GTR posttest achievement. Data included biweekly implementation surveys from teachers and energy resources content and GTR pre- and posttest achievement measures from 1,049 students. Students significantly increased both their energy resources content knowledge and their GTR skills related to energy resources at the end of the curriculum enactment. Both multiple regression and hierarchical linear modeling found that students' initial GTR abilities and gain in energy content knowledge were significantly explanatory variables for their geospatial achievement at the end of curriculum enactment, p < .001. Teacher enactment factors, including adherence to implementing the critical components of the curriculum or the number of years the teachers had taught the curriculum, did not have significant effects on students' geospatial posttest achievement. The findings from this study provide support that learning with geospatially enabled learning technologies can support GTR with urban middle-level learners.

Electron Microscopist | Center for Cancer Research

Cancer.gov

PROGRAM DESCRIPTION The Cancer Research Technology Program (CRTP) develops and implements emerging technology, cancer biology expertise and research capabilities to accomplish NCI research objectives. The CRTP is an outward-facing, multi-disciplinary hub purposed to enable the external cancer research community and provides dedicated support to NCI’s intramural Center for Cancer Research (CCR). The dedicated units provide electron microscopy, protein characterization, protein expression, optical microscopy and genetics. These research efforts are an integral part of CCR at the Frederick National Laboratory for Cancer Research (FNLCR). CRTP scientists also work collaboratively with intramural NCI investigators to provide research technologies and expertise. KEY ROLES/RESPONSIBILITIES - THIS POSITION IS CONTINGENT UPON FUNDING APPROVAL The Electron Microscopist will: Operate ultramicrotomes (Leica) and other instrumentation related to the preparation of embedded samples for EM (TEM and SEM) Operate TEM microscopes, (specifically Hitachi, FEI T20 and FEI T12) as well as SEM microscopes (Hitachi); task will include loading samples, screening, and performing data collection for a variety of samples: from cells to proteins Manage maintenance for the TEM and SEM microscopes Provide technical advice to investigators on sample preparation and data collection

Advanced Nacelle Acoustic Lining Concepts Development

NASA Technical Reports Server (NTRS)

Bielak, G.; Gallman, J.; Kunze, R.; Murray, P.; Premo, J.; Kosanchick, M.; Hersh, A.; Celano, J.; Walker, B.; Yu, J.;

The Concept and Experimental Investigation of CO2 and Steam Co-electrolysis for Resource Utilization in Space Exploration

NASA Technical Reports Server (NTRS)

Stoots, Carl; Mulloth, Lila M.; Luna, Bernadette; Varghese, Mini M.

2009-01-01

CO2 acquisition and utilization technologies will have a vital role in determining sustained and affordable life support and in-situ fuel production architectures for human and robotic exploration of Moon and Mars. For long-term human exploration to be practical, reliable technologies have to be implemented to capture and chemically reduce the metabolic CO2 from the cabin air to restitute oxygen consumption. Technologies that facilitate the in-situ capture and conversion of atmospheric CO2 to fuel are essential for a viable human mission to Mars and their demonstration on the moon is critical as well. This paper describes the concept and experimental investigation of a CO2 capture and reduction system that comprises an adsorption compressor and a CO2 and steam co-electrolysis unit. The process products include oxygen for life support and Syngas (CO and H2) for synthetic fuel production. Electrochemical performance in terms of CO2 conversion, oxygen production, and power consumption of a system with a capacity to process 1kg CO2 per day (1-person equivalent) will be discussed.

Micromechanical Signal Processors

NASA Astrophysics Data System (ADS)

Nguyen, Clark Tu-Cuong

Completely monolithic high-Q micromechanical signal processors constructed of polycrystalline silicon and integrated with CMOS electronics are described. The signal processors implemented include an oscillator, a bandpass filter, and a mixer + filter--all of which are components commonly required for up- and down-conversion in communication transmitters and receivers, and all of which take full advantage of the high Q of micromechanical resonators. Each signal processor is designed, fabricated, then studied with particular attention to the performance consequences associated with miniaturization of the high-Q element. The fabrication technology which realizes these components merges planar integrated circuit CMOS technologies with those of polysilicon surface micromachining. The technologies are merged in a modular fashion, where the CMOS is processed in the first module, the microstructures in a following separate module, and at no point in the process sequence are steps from each module intermixed. Although the advantages of such modularity include flexibility in accommodating new module technologies, the developed process constrained the CMOS metallization to a high temperature refractory metal (tungsten metallization with TiSi _2 contact barriers) and constrained the micromachining process to long-term temperatures below 835^circC. Rapid-thermal annealing (RTA) was used to relieve residual stress in the mechanical structures. To reduce the complexity involved with developing this merged process, capacitively transduced resonators are utilized. High-Q single resonator and spring-coupled micromechanical resonator filters are also investigated, with particular attention to noise performance, bandwidth control, and termination design. The noise in micromechanical filters is found to be fairly high due to poor electromechanical coupling on the micro-scale with present-day technologies. Solutions to this high series resistance problem are suggested, including smaller electrode-to-resonator gaps to increase the coupling capacitance. Active Q-control techniques are demonstrated which control the bandwidth of micromechanical filters and simulate filter terminations with little passband distortion. Noise analysis shows that these active techniques are relatively quiet when compared with other resistive techniques. Modulation techniques are investigated whereby a single resonator or a filter constructed from several such resonators can provide both a mixing and a filtering function, or a filtering and amplitude modulation function. These techniques center around the placement of a carrier signal on the micromechanical resonator. Finally, micro oven stabilization is investigated in an attempt to null the temperature coefficient of a polysilicon micromechanical resonator. Here, surface micromachining procedures are utilized to fabricate a polysilicon resonator on a microplatform--two levels of suspension--equipped with heater and temperature sensing resistors, which are then imbedded in a feedback loop to control the platform (and resonator) temperature. (Abstract shortened by UMI.).

Unmanned Aerial Systems in Occupational Hygiene-Learning from Allied Disciplines.

PubMed

Eninger, Robert M; Johnson, Robert L

2015-10-01

Unmanned Aerial System (UAS) technologies are rapidly developing, lowering cost, and technology barriers for their use in numerous applications. This review and commentary summarizes relevant literature in allied fields and evaluates potential application and utility of UAS technology in the discipline of occupational hygiene. Disciplines closely related to occupational hygiene are moving to investigate potential uses--and in some cases--already employing this technology for research or commercial purposes. The literature was reviewed to formulate a cross-sectional picture of how UAS technology is being used in these closely allied disciplines which could inform or guide potential use in occupational hygiene. Discussed are UAS applications in environmental monitoring, emergency response, epidemiology, safety, and process optimization. A rapidly developing state of the art indicates that there is potential utility for this technology in occupational hygiene. Benefits may include cost savings, time savings, and averting hazardous environments via remote sensing. The occupational hygiene community can look to allied fields to garner lessons and possible applications to their own practice. Published by Oxford University Press on behalf of the British Occupational Hygiene Society 2015.

Rural Veteran Access to Healthcare Services: Investigating the Role of Information and Communication Technologies in Overcoming Spatial Barriers

PubMed Central

Schooley, Benjamin L; Horan, Thomas A; Lee, Pamela W; West, Priscilla A

2010-01-01

This multimethod pilot study examined patient and practitioner perspectives on the influence of spatial barriers to healthcare access and the role of health information technology in overcoming these barriers. The study included a survey administered to patients attending a Department of Veterans Affairs (VA) health visit, and a focus group with VA care providers. Descriptive results and focus group findings are presented. Spatial distance is a significant factor for many rural veterans when seeking healthcare. For this sample of rural veterans, a range of telephone, computer, and Internet technologies may become more important for accessing care as Internet access becomes more ubiquitous and as younger veterans begin using the VA health system. The focus group highlighted the negative impact of distance, economic considerations, geographic barriers, and specific medical conditions on access to care. Lack of adequate technology infrastructure was seen as an obstacle to utilization. This study discusses the need to consider distance, travel modes, age, and information technology infrastructure and adoption when designing health information technology to care for rural patients. PMID:20697468

Friction Stir Processing of Particle Reinforced Composite Materials

PubMed Central

Gan, Yong X.; Solomon, Daniel; Reinbolt, Michael

2010-01-01

The objective of this article is to provide a review of friction stir processing (FSP) technology and its application for microstructure modification of particle reinforced composite materials. The main focus of FSP was on aluminum based alloys and composites. Recently, many researchers have investigated this technology for treating other alloys and materials including stainless steels, magnesium, titanium, and copper. It is shown that FSP technology is very effective in microstructure modification of reinforced metal matrix composite materials. FSP has also been used in the processing and structure modification of polymeric composite materials. Compared with other manufacturing processes, friction stir processing has the advantage of reducing distortion and defects in materials. The layout of this paper is as follows. The friction stir processing technology will be presented first. Then, the application of this technology in manufacturing and structure modification of particle reinforced composite materials will be introduced. Future application of friction stir processing in energy field, for example, for vanadium alloy and composites will be discussed. Finally, the challenges for improving friction stir processing technology will be mentioned.

Household energy management strategies in Bulgaria's transitioning energy sector

NASA Astrophysics Data System (ADS)

Carper, Mark Daniel Lynn

Recent transition literature of post-socialist states has addressed the shortcomings of a rapid blanket implementation of neo-liberal policies and practices placed upon a landscape barren of the needed institutions and experiences. Included in these observations are the policy-making oversight of spatial socioeconomic variations and their individual and diverse methods of coping with their individual challenges. Of such literature addressing the case of Bulgaria, a good portion deals with the spatial consequences of restructuring as well as with embedded disputes over access to and control of resources. With few exceptions, studies of Bulgaria's changing energy sector have largely been at the state level and have not been placed within the context of spatial disparities of socioeconomic response. By exploring the variations of household energy management strategies across space, my dissertation places this resource within such a theoretical context and offers analysis based on respective levels of economic and human development, inherited material infrastructures, the organization and activities of institutions, and fuel and technological availability. A closed survey was distributed to explore six investigational themes across four geographic realms. The investigational themes include materials of housing construction, methods of household heating, use of electrical appliances, energy conservation strategies, awareness and use of energy conservation technologies, and attitudes toward the transitioning energy sector. The geographic realms include countrywide results, the urban-rural divide, regional variations, and urban divisions of the capital city, Sofia. Results conclude that, indeed, energy management strategies at the household level have been shaped by multiple variables, many of which differ across space. These variables include price sensitivity, degree of dependence on remnant technologies, fuel and substitute availability, and level of human and socioeconomic development. Thus far, the state has taken a very limited role in improving residential energy efficiency despite the increased energy expenditure burdens that most households face. Yet lacking are affordable technologies, educational campaigns, and individual financing mechanisms or incentives. As shown, where there is an informed, active, and financially capable population, improved household efficiency is more likely to be the winning strategy for both the goals of the individual as well as of the state.

Report on Alternative Devices to Pyrotechnics on Spacecraft

NASA Technical Reports Server (NTRS)

Lucy, M. H.; Hardy, R. C.; Kist, E. H., Jr.; Watson, J. J.; Wise, S. A.

1996-01-01

Pyrotechnics accomplish many functions on today's spacecraft, possessing minimum volume/weight, providing instantaneous operation on demand, and requiring little input energy. However, functional shock, safety, and overall system cost issues, combined with emergence and availability of new technologies question their continued use on space missions. Upon request from the National Aeronautics and Space Administration's (NASA) Program Management Council (PMC), Langley Research Center (LaRC) conducted a survey to identify and evaluate state-of-the-art non-explosively actuated (NEA) alternatives to pyrotechnics, identify NEA devices planned for NASA use, and investigate potential interagency cooperative efforts. In this study, over 135 organizations were contacted, including NASA field centers, Department of Defense (DOD) and other government laboratories, universities, and American and European industrial sources resulting in further detailed discussions with over half, and 18 face-to-face briefings. Unlike their single use pyrotechnic predecessors, NEA mechanisms are typically reusable or refurbishable, allowing flight of actual tested units. NEAs surveyed include spool-based devices, thermal knife, Fast Acting Shockless Separation Nut (FASSN), paraffin actuators, and shape memory alloy (SMA) devices (e.g., Frangibolt). The electro-mechanical spool, paraffin actuator and thermal knife are mature, flight proven technologies, while SMA devices have a limited flight history. There is a relationship between shock, input energy requirements, and mechanism functioning rate. Some devices (e.g., Frangibolt and spool based mechanisms) produce significant levels of functional shock. Paraffin, thermal knife, and SMA devices can provide gentle, shock-free release but cannot perform critically timed, simultaneous functions. The FASSN flywheel-nut release device possesses significant potential for reducing functional shock while activating nearly instantaneously. Specific study recommendations include: (1) development of NEA standards, specifically in areas of material characterization, functioning rates, and test methods; (2) a systems level approach to assure successful NEA technology application; and (3) further investigations into user needs, along with industry/government system-level real spacecraft cost benefit trade studies to determine NEA application foci and performance requirements. Additional survey observations reveal an industry and government desire to establish partnerships to investigate remaining unknowns and formulate NEA standards, specifically those driven by SMAs. Finally, there is increased interest and need to investigate alternative devices for such functions as stage/shroud separation and high pressure valving. This paper summarizes results of the NASA-LaRC survey of pyrotechnic alternatives. State of-the-art devices with their associated weight and cost savings are presented. Additionally, a comparison of functional shock characteristics of several devices are shown, and potentially related technology developments are highlighted.

Marine Hydrokinetic Energy Site Identification and Ranking Methodology Part II: Tidal Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilcher, Levi; Thresher, Robert; Tinnesand, Heidi

Marine hydrokinetic energy is a promising and growing piece of the renewable energy sector that offers high predictability and additional energy sources for a diversified energy economy. This report investigates the market opportunities for tidal energy along the U.S. coastlines. It is part one of a two-part investigation into the United States' two largest marine hydrokinetic resources (wave and tidal). Tidal energy technology is still an emerging form of renewable energy for which large-scale grid-connected project costs are currently poorly defined. Ideally, device designers would like to know the resource conditions at economical project sites so they can optimize devicemore » designs. On the other hand, project developers need detailed device cost data to identify sites where projects are economical. That is, device design and siting are, to some extent, a coupled problem. This work describes a methodology for identifying likely deployment locations based on a set of criteria that tidal energy experts in industry, academia, and national laboratories agree are likely to be important factors for all technology types. Several factors that will affect tidal project costs and siting have not been considered here -- including permitting constraints, conflicting use, seasonal resource variability, extreme event likelihood, and distance to ports -- because consistent data are unavailable or technology-independent scoring could not be identified. As the industry continues to mature and converge around a subset of device archetypes with well-defined costs, more precise investigations of project siting that include these factors will be possible. For now, these results provide a high-level guide pointing to the regions where markets and resource will one day support commercial tidal energy projects.« less

Automatic speech recognition technology development at ITT Defense Communications Division

NASA Technical Reports Server (NTRS)

White, George M.

1977-01-01

An assessment of the applications of automatic speech recognition to defense communication systems is presented. Future research efforts include investigations into the following areas: (1) dynamic programming; (2) recognition of speech degraded by noise; (3) speaker independent recognition; (4) large vocabulary recognition; (5) word spotting and continuous speech recognition; and (6) isolated word recognition.

A Study of the Use of Web-Based Conferencing Software To Enhance Learning Environments in Teacher Education.

ERIC Educational Resources Information Center

Sosin, Adrienne

This action research study of electronic conferencing highlights the online portions of teacher education courses at Pace University, New York. The study explores the infusion of technology into teaching and investigates the utility of a particular type of discussion software for learning. Data sources include texts of electronic conversations,…

Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Beyond Academic and Social Integration: Understanding the Impact of a STEM Enrichment Program on the Retention and Degree Attainment of Underrepresented Students

ERIC Educational Resources Information Center

Lane, Tonisha B.

2016-01-01

The current study used a case study methodological approach, including document analysis, semistructured interviews, and participant observations, to investigate how a science, technology, engineering, and mathematics (STEM) enrichment program supported retention and degree attainment of underrepresented students at a large, public, predominantly…

The Telecommunications and Data Acquisition Report

NASA Technical Reports Server (NTRS)

Posner, E. C. (Editor)

1984-01-01

Activities in space communication, radio navigation, radio science, and ground-based astronomy are reported. Advanced systems for the Deep Space Network and its Ground-Communications Facility are discussed including station control and system technology. Network sustaining as well as data and information systems are covered. Studies of geodynamics, investigations of the microwave spectrum, and the search for extraterrestrial intelligence are reported.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

NASA Technical Reports Server (NTRS)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Online Quizzes in a Virtual Learning Environment as a Tool for Formative Assessment

ERIC Educational Resources Information Center

Cohen, Donita; Sasson, Irit

2016-01-01

Assessment in education employing web tools, also known as e-assessment, deals with the effective use of technology to support successful instruction. The aim of this study was to investigate learning outcomes and the students' attitudes to online Moodle quizzes in order to improve instructional design. The research population included 204 college…

iss051e029016

NASA Image and Video Library

2017-04-28

iss051e029016 (4/28/2017) --- Crew members on the International Space Station completed a new session of the Genes in Space 2 investigation. Spaceflight causes many changes to the human body, including alterations in DNA and a weakened immune system. This study uses a new technology to study DNA in space to try and safeguard crew health. Credits: NASA

iss051e044502

NASA Image and Video Library

2017-05-17

iss051e044502 (5/17/2017) --- Crew members on the International Space Station completed a new session of the Genes in Space 2 investigation. Spaceflight causes many changes to the human body, including alterations in DNA and a weakened immune system. This study uses a new technology to study DNA in space to try and safeguard crew health. Credits: NASA

iss051e044497

NASA Image and Video Library

2017-05-17

iss051e044497 (5/17/2017) --- Crew members on the International Space Station completed a new session of the Genes in Space 2 investigation. Spaceflight causes many changes to the human body, including alterations in DNA and a weakened immune system. This study uses a new technology to study DNA in space to try and safeguard crew health. Credits: NASA

Promoting Formative Assessment in a Connected Classroom Environment: Design and Implementation of Digital Resources

ERIC Educational Resources Information Center

Cusi, Annalisa; Morselli, Francesca; Sabena, Cristina

2017-01-01

This paper is based on a design-based research project investigating how to use digital resources to help activate formative assessment processes in the classroom. Performed as part of FaSMEd, a European Union project, our own project adopts a comprehensive theoretical framework, including the different functionalities of technology, formative…

Seniors Online: Online Literacy and Learning by Senior Citizens in Rural Centres.

ERIC Educational Resources Information Center

Millar, Pat; Falk, Ian

The learning needs of older adults living in rural Tasmania, Australia, and the potential of online technologies to foster local literacy and community well-being were examined. The study used a qualitative inquiry strategy that included visits to three sites to investigate the literacy and numeracy implications of senior citizens' use of online…

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

NASA Technical Reports Server (NTRS)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

A Case Study of Integrating Interwise: Interaction, Internet Self-Efficacy, and Satisfaction in Synchronous Online Learning Environments

ERIC Educational Resources Information Center

Kuo, Yu-Chun; Walker, Andrew E.; Belland, Brian R.; Schroder, Kerstin E. E.; Kuo, Yu-Tung

2014-01-01

This paper reports research on the implementation of a web-based videoconferencing tool (Interwise) for synchronous learning sessions on an industrial technology course offered through a university in northern Taiwan. The participants included undergraduate students from the same course offered in two different semesters. We investigated students'…

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

NASA Technical Reports Server (NTRS)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

A Model of E-Learning Uptake and Continued Use in Higher Education Institutions

ERIC Educational Resources Information Center

Pinpathomrat, Nakarin; Gilbert, Lester; Wills, Gary B.

2013-01-01

This research investigates the factors that affect a students' take-up and continued use of E-learning. A mathematical model was constructed by applying three grounded theories; Unified Theory of Acceptance and Use of Technology, Keller's ARCS model, and Expectancy Disconfirm Theory. The learning preference factor was included in the model.…

The Affordances of Using a Flipped Classroom Approach in the Teaching of Mathematics: A Case Study of a Grade 10 Mathematics Class

ERIC Educational Resources Information Center

Muir, Tracey; Geiger, Vince

2016-01-01

Teaching secondary mathematics has a number of challenges, including the expectations that teachers cover the prescribed curriculum, help students learn difficult concepts, prepare students for future studies, and, increasingly, that they do so incorporating digital technologies. This study investigates a teacher's, and his students', perceptions…

The Effect of a Stimulating Learning Environment on Pre-Service Teachers' Motivation and 21st Century Skills

ERIC Educational Resources Information Center

Nissim, Yonit; Weissblueth, Eyal; Scott-Webber, Lennie; Amar, Shimon

2016-01-01

We investigated the effect of an innovative technology-supported learning environment on pre-service student teachers' motivation and 21st century skills. Students and instructors filled-in the Active Learning Post Occupancy Evaluation (AL-POE) questionnaire. Analysis included tests for individual items and a comparison of the overall mean,…

Empirical Examination of the Adoption of WebCT Using TAM

ERIC Educational Resources Information Center

Ngai, E. W. T.; Poon, J. K. L.; Chan, Y. H. C.

2007-01-01

Web Course Tools (WebCT) have enhanced the ability and motivation of institutes of higher education to support e-learning. In this study, we extended the Technology Acceptance Model to include technical support as a precursor and then investigated the role of the extended model in user acceptance of WebCT. Responses from 836 university students…

Assessment of current technologies for communition of forest residues

Treesearch

Dana L. Mitchell

2005-01-01

Recent legislation and energy prices have led to an increased need for alternative energy sources. Biomass, including forest residues, is expected to replace a part of the nation’s reliance on petroleum consumption. This paper provides an overview of existing literature related to the harvest, communition and transport of forest residues. Past studies have investigated...

Information and Communication Technologies: A Tool Empowering and Developing the Horizon of the Learner

ERIC Educational Resources Information Center

Debande, Olivier; Ottersten, Eugenia Kazamaki

2004-01-01

In this article, we focus on the implementation and development of ICT in the education sector, challenging and developing the traditional learning environment whilst introducing new educational tools including e-learning. The paper investigates ICT as a tool empowering and developing learners lifelong learning opportunities. It defines a model of…

Evaluation of mixed hardwood studs manufactured by the Saw-Dry-Rip (SDR) process

Treesearch

R. R. Maeglin; R. S. Boone

1985-01-01

This paper describes increment cores (a useful tool in forestry and wood technology) and their uses which include age determination, growth increment, specific gravity determination, fiber length measurements, fibril angle measurements, cell measurements, and pathological investigations. Also described is the use and care of the increment borer which is essential in...

The Comparative Impact of Face-to-Face Instruction and Video Conferencing Instruction on Students' Anxiety Levels

ERIC Educational Resources Information Center

McKnight, Jodi L.

2010-01-01

The purpose of the study is to contribute knowledge to the existing body of psychological research in the area of emotional responses, particularly anxiety, and learning environments. It also contributes to other areas of the literature, including education and technology. Hove and Corcoran (2008) recommended investigating students' emotional…

Electronic Paint: Understanding Children's Representation through Their Interactions with Digital Paint

ERIC Educational Resources Information Center

Matthews, John; Seow, Peter

2007-01-01

This article investigates very young children's use of a stylus-driven, electronic painting and drawing on the tablet PC. The authors compare their development in the use of this device with their use of other mark-making media, including those which derive from pencil and paper technologies and also with mouse-driven electronic paintbox programs.…

Dissemination of information about the technologies of the Vision Research Lab through the World Wide Web

NASA Technical Reports Server (NTRS)

Dorais, Christopher M.

2004-01-01

The Vision Research Lab at NASA John Glenn Research Center is headed by Dr. Rafat Ansari. Dr. Ansari and other researchers have developed technologies that primarily use laser and fiber optics to non-invasively detect different ailments and diseases of the eye. One of my goals as a LERCIP intern and ACCESS scholar for the 2004 summer is to inform other NASA employees, researchers and the general public about these technologies through the development of a website. The website incorporates the theme that the eye is a window to the body. Thus by investigating the processes of the eye, we can better understand and diagnosis different ailments and diseases. These ailments occur in not only earth bound humans, but astronauts as well as a result of exposure to elevated levels of radiation and microgravity conditions. Thus the technologies being developed at the Vision Research Lab are invaluable to humans on Earth in addition to those astronauts in space. One of my first goals was to research the technologies being developed at the lab. The first several days were spent immersing myself in the various articles, journals and reports about the theories behind Dynamic Light Scattering, Laser Doppler Flowmetry, Autofluoresence, Raman Spectroscopy, Polarimetry and Oximetry. Interviews with the other researchers proved invaluable to help understand these theories as well gain hands on experience with the devices being developed using these technologies. The rest of the Vision Research Team and I sat down and discussed how the overall website should be presented. Combining this information with the knowledge of the theories and applications of the hardware being developed, I worked out different ideas to present this information. I quickly learned Paint Shop Pro 8 and FrontPage 2002, as well as using online tutorials and other resources to help design an effective website. The Vision Research Lab website incorporates the anatomy and physiology of the eye, different diseases that affect the eye and the technologies being develop at the lab to help diagnosis these diseases. It also includes background information on Dr. Ansari as well as other researchers involved in the lab and it includes segments on patents, awards and achievements. There are links to help viewers navigate to internal and external websites to further investigate different ideas and hrther understand the implications of these technologies at being developed.

Advanced Technologies to Improve Closure of Life Support Systems

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2016-01-01

As NASA looks beyond the International Space Station toward long-duration, deep space missions away from Earth, the current practice of supplying consumables and spares will not be practical nor affordable. New approaches are sought for life support and habitation systems that will reduce dependency on Earth and increase mission sustainability. To reduce launch mass, further closure of Environmental Control and Life Support Systems (ECLSS) beyond the current capability of the ISS will be required. Areas of particular interest include achieving higher degrees of recycling within Atmosphere Revitalization, Water Recovery and Waste Management Systems. NASA is currently investigating advanced carbon dioxide reduction processes that surpass the level of oxygen recovery available from the Sabatier Carbon Dioxide Reduction Assembly (CRA) on the ISS. Candidate technologies will potentially improve the recovery of oxygen from about 50% (for the CRA) to as much as 100% for technologies who's end product is solid carbon. Improving the efficiency of water recycling and recovery can be achieved by the addition of advanced technologies to recover water from brines and solid wastes. Bioregenerative technologies may be utilized for water reclaimation and also for the production of food. Use of higher plants will simultaneously benefit atmosphere revitalization and water recovery through photosynthesis and transpiration. The level at which bioregenerative technologies are utilized will depend on their comparative requirements for spacecraft resources including mass, power, volume, heat rejection, crew time and reliability. Planetary protection requirements will need to be considered for missions to other solar system bodies.

Snapshot of Active Flow Control Research at NASA Langley

NASA Technical Reports Server (NTRS)

Washburn, A. E.; Gorton, S. Althoff; Anders, S. G.

2002-01-01

NASA Langley is aggressively investigating the potential advantages of active flow control as opposed to more traditional aerodynamic techniques. Many of these techniques will be blended with advanced materials and structures to further enhance payoff. Therefore a multi-disciplinary approach to technology development is being attempted that includes researchers from the more historical disciplines of fluid mechanics. acoustics, material science, structural mechanics, and control theory. The overall goals of the topics presented are focused on advancing the state of knowledge and understanding of controllable fundamental mechanisms in fluids rather than on specific engineering problems. An organizational view of current research activities at NASA Langley in active flow control as supported by several programs such as the Morphing Project under Breakthrough Vehicle Technologies Program (BVT). the Ultra-Efficient Engine Technology Program (UEET), and the 21st Century Aircraft Technology Program (TCAT) is presented. On-center research as well as NASA Langley funded contracts and grants are discussed at a relatively high level. The products of this research, as part of the fundamental NASA R and D (research and development) program. will be demonstrated as either bench-top experiments, wind-tunnel investigations, or in flight tests. Later they will be transferred to more applied research programs within NASA, DOD (Department of Defense), and U.S. industry.

Investigation of Self Consolidating Concrete Containing High Volume of Supplementary Cementitious Materials and Recycled Asphalt Pavement Aggregates

NASA Astrophysics Data System (ADS)

Patibandla, Varun chowdary

The use of sustainable technologies such as supplementary cementitiuous materials (SCMs), and/or recycled materials is expected to positively affect the performance of concrete mixtures. However, it is important to study and qualify such mixtures and check if the required specifications of their intended application are met before they can be implemented in practice. This study presents the results of a laboratory investigation of Self Consolidating concrete (SCC) containing sustainable technologies. A total of twelve concrete mixtures were prepared with various combinations of fly ash, slag, and recycled asphalt pavement (RAP). The mixtures were divided into three groups with constant water to cementitiuous materials ratio of 0.37, and based on the RAP content; 0, 25, and 50% of coarse aggregate replaced by RAP. All mixtures were prepared to achieve a target slump flow equal to or higher than 500 mm (24in). A control mixture for each group was prepared with 100% Portland cement whereas all other mixtures were designed to have up to 70% of portland cement replaced by a combination of supplementary cementitiuous materials (SCMs) such as class C fly ash and granulated blast furnace slag. The properties of fresh concrete investigated in this study include flowability, deformability; filling capacity, and resistance to segregation. In addition, the compressive strength at 3, 14, and 28 days, the tensile strength, and the unrestrained shrinkage up to 80 days was also investigated. As expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Analysis of the experimental data indicated that inclusion of RAP not only reduces the ultimate strength, but it also affected the compressive strength development rate. Moreover, several mixes satisfied compressive strength requirements for pavements and bridges; those mixes included relatively high percentages of SCMs and RAP. Based on the results obtained in this study, it is not recommended to replace the coarse aggregate in SCC by more than 25% RAP.

Criticality of Low-Energy Protons in Single-Event Effects Testing of Highly-Scaled Technologies

NASA Technical Reports Server (NTRS)

Pellish, Jonathan A.; Marshall, Paul W.; Rodbell, Kenneth P.; Gordon, Michael S.; LaBel, Kenneth A.; Schwank, James R.; Dodds, Nathaniel A.; Castaneda, Carlos M.; Berg, Melanie D.; Kim, Hak S.;

Thin Film Physical Sensor Instrumentation Research and Development at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wrbanek, John D.; Fralick, Gustave C.

2006-01-01

A range of thin film sensor technology has been demonstrated enabling measurement of multiple parameters either individually or in sensor arrays including temperature, strain, heat flux, and flow. Multiple techniques exist for refractory thin film fabrication, fabrication and integration on complex surfaces and multilayered thin film insulation. Leveraging expertise in thin films and high temperature materials, investigations for the applications of thin film ceramic sensors has begun. The current challenges of instrumentation technology are to further develop systems packaging and component testing of specialized sensors, further develop instrumentation techniques on complex surfaces, improve sensor durability, and to address needs for extreme temperature applications. The technology research and development ongoing at NASA Glenn for applications to future launch vehicles, space vehicles, and ground systems is outlined.

High-fidelity video and still-image communication based on spectral information: natural vision system and its applications

NASA Astrophysics Data System (ADS)

Yamaguchi, Masahiro; Haneishi, Hideaki; Fukuda, Hiroyuki; Kishimoto, Junko; Kanazawa, Hiroshi; Tsuchida, Masaru; Iwama, Ryo; Ohyama, Nagaaki

2006-01-01

In addition to the great advancement of high-resolution and large-screen imaging technology, the issue of color is now receiving considerable attention as another aspect than the image resolution. It is difficult to reproduce the original color of subject in conventional imaging systems, and that obstructs the applications of visual communication systems in telemedicine, electronic commerce, and digital museum. To breakthrough the limitation of conventional RGB 3-primary systems, "Natural Vision" project aims at an innovative video and still-image communication technology with high-fidelity color reproduction capability, based on spectral information. This paper summarizes the results of NV project including the development of multispectral and multiprimary imaging technologies and the experimental investigations on the applications to medicine, digital archives, electronic commerce, and computer graphics.

Flight Dynamics and Controls Discipline Overview

NASA Technical Reports Server (NTRS)

Theodore, Colin R.

2012-01-01

This presentation will touch topics, including but not limited to, the objectives and challenges of flight dynamics and controls that deal with the pilot and the cockpit's technology, the flight dynamics and controls discipline tasks, and the full envelope of flight dynamics modeling. In addition, the LCTR 7x10-ft wind tunnel test will also be included along with the optimal trajectories for noise abatement and its investigations on handling quality. Furthermore, previous experiments and their complying results will also be discussed.

Summaries of FY 1995 geosciences research

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-12-01

The summaries in this document, prepared by the investigators, describe the scope of the individual programs. The Geosciences Research Program includes research in geophysics, geochemistry, resource evaluation, solar-terrestrial interactions, and their subdivisions including earth dynamics, properties of earth materials, rock mechanics, underground imaging, rock-fluid interactions, continental scientific drilling, geochemical transport, solar/atmospheric physics, and modeling, with emphasis on the interdisciplinary areas. All such research is related either direct or indirect to the Department of Energy`s long-range technological needs.

Green Mono Propulsion Activities at MSFC

NASA Technical Reports Server (NTRS)

Robinson, Joel W.

2014-01-01

In 2012, the National Aeronautics & Space Administration (NASA) Space Technology Mission Directorate (STMD) began the process of building an integrated technology roadmap, including both technology pull and technology push strategies. Technology Area 1 (TA-01) for Launch Propulsion Systems and TA-02 In-Space Propulsion are two of the fourteen TAs that provide recommendations for the overall technology investment strategy and prioritization of NASA's space technology activities. Identified within these documents are future needs of green propellant use. Green ionic liquid monopropellants and propulsion systems are beginning to be demonstrated in space flight environments. Starting in 2010 with the flight of Prisma, a 1-N thruster system began on-orbit demonstrations operating on ammonium dinitramide based propellant. The NASA Green Propellant Infusion Mission (GPIM) plans to demonstrate both 1-N, and 22-N hydroxyl ammonium nitrate (HAN)-based thrusters in a 2015 flight demonstration. In addition, engineers at MSFC have been evaluating green propellant alternatives for both thrusters and auxiliary power units (APUs). This paper summarizes the status of these development/demonstration activities and investigates the potential for evolution of green propellants from small spacecraft and satellites to larger spacecraft systems, human exploration, and launch system auxiliary propulsion applications.

A Practical Approach to Starting Fission Surface Power Development

NASA Technical Reports Server (NTRS)

Mason, Lee S.

2006-01-01

The Prometheus Power and Propulsion Program has been reformulated to address NASA needs relative to lunar and Mars exploration. Emphasis has switched from the Jupiter Icy Moons Orbiter (JIMO) flight system development to more generalized technology development addressing Fission Surface Power (FSP) and Nuclear Thermal Propulsion (NTP). Current NASA budget priorities and the deferred mission need date for nuclear systems prohibit a fully funded reactor Flight Development Program. However, a modestly funded Advanced Technology Program can and should be conducted to reduce the risk and cost of future flight systems. A potential roadmap for FSP technology development leading to possible flight applications could include three elements: 1) Conceptual Design Studies, 2) Advanced Component Technology, and 3) Non-Nuclear System Testing. The Conceptual Design Studies would expand on recent NASA and DOE analyses while increasing the depth of study in areas of greatest uncertainty such as reactor integration and human-rated shielding. The Advanced Component Technology element would address the major technology risks through development and testing of reactor fuels, structural materials, primary loop components, shielding, power conversion, heat rejection, and power management and distribution (PMAD). The Non-Nuclear System Testing would provide a modular, technology testbed to investigate and resolve system integration issues.