[New simulation technologies in neurosurgery].

PubMed

Byvaltsev, V A; Belykh, E G; Konovalov, N A

2016-01-01

The article presents a literature review on the current state of simulation technologies in neurosurgery, a brief description of the basic technology and the classification of simulation models, and examples of simulation models and skills simulators used in neurosurgery. Basic models for the development of physical skills, the spectrum of available computer virtual simulators, and their main characteristics are described. It would be instructive to include microneurosurgical training and a cadaver course of neurosurgical approaches in neurosurgery training programs and to extend the use of three-dimensional imaging. Technologies for producing three-dimensional anatomical models and patient-specific computer simulators as well as improvement of tactile feedback systems and display quality of virtual models are promising areas. Continued professional education necessitates further research for assessing the validity and practical use of simulators and physical models.

Forecasting Educational Futures. Resolving Uncertainties and Disagreements through Compact Policy Assessment.

ERIC Educational Resources Information Center

Hudson, Barclay M.

Descriptions of models for policy analysis in future studies are presented. Separate sections of the paper focus on the need for appropriate technologies of social science in future studies, a description of "compact policy assessment" (CPA), and a comparison of two CPA methods, Compass and Delphi. Compact policy assessment refers to any low-cost,…

An Investigation of Pre-Service Primary School Teachers' Attitudes towards Digital Technology and Digital Citizenship Levels in Terms of Some Variables

ERIC Educational Resources Information Center

Çiftci, Serdar; Aladag, Soner

2018-01-01

This study aims at investigating the relationship between pre-service primary school teachers' attitudes towards digital technology and digital citizenship scale levels. The research was designed in descriptive survey model. The data collection tools were "Attitude Scale for Digital Technology" (ASDT) developed by Cabi (2016) and…

Methodology and Results of Mathematical Modelling of Complex Technological Processes

NASA Astrophysics Data System (ADS)

Mokrova, Nataliya V.

2018-03-01

The methodology of system analysis allows us to draw a mathematical model of the complex technological process. The mathematical description of the plasma-chemical process was proposed. The importance the quenching rate and initial temperature decrease time was confirmed for producing the maximum amount of the target product. The results of numerical integration of the system of differential equations can be used to describe reagent concentrations, plasma jet rate and temperature in order to achieve optimal mode of hardening. Such models are applicable both for solving control problems and predicting future states of sophisticated technological systems.

Description and expected performance of flight-model, 12-gigahertz, output stage tube for the communications technology satellite

NASA Technical Reports Server (NTRS)

Chomos, G. J.; Curren, A. N.

1976-01-01

The flight model output stage tube for the Communications Technology Satellite is described. The output stage tube is a 12-GHz, 200-W, coupled cavity traveling wave tube. The tube has a multistage depressed collector for efficiency enhancement. Collector cooling is accomplished by direct radiation to space. Expected rf performance and factors affecting on orbit performance and life are discussed.

Descriptive Model of Generic WAMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauer, John F.; DeSteese, John G.

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Modeling of processing technologies in food industry

NASA Astrophysics Data System (ADS)

Korotkov, V. G.; Sagitov, R. F.; Popov, V. P.; Bachirov, V. D.; Akhmadieva, Z. R.; TSirkaeva, E. A.

2018-03-01

Currently, the society is facing an urgent need to solve the problems of nutrition (products with increased nutrition value) and to develop energy-saving technologies for food products. A mathematical modeling of heat and mass transfer of polymer materials in the extruder is rather successful these days. Mathematical description of movement and heat exchange during extrusion of gluten-protein-starch-containing material similar to pasta dough in its structure, were taken as a framework for the mathematical model presented in this paper.

From tissue to silicon to plastic: three-dimensional printing in comparative anatomy and physiology

PubMed Central

Lauridsen, Henrik; Hansen, Kasper; Nørgård, Mathias Ørum; Wang, Tobias; Pedersen, Michael

2016-01-01

Comparative anatomy and physiology are disciplines related to structures and mechanisms in three-dimensional (3D) space. For the past centuries, scientific reports in these fields have relied on written descriptions and two-dimensional (2D) illustrations, but in recent years 3D virtual modelling has entered the scene. However, comprehending complex anatomical structures is hampered by reproduction on flat inherently 2D screens. One way to circumvent this problem is in the production of 3D-printed scale models. We have applied computed tomography and magnetic resonance imaging to produce digital models of animal anatomy well suited to be printed on low-cost 3D printers. In this communication, we report how to apply such technology in comparative anatomy and physiology to aid discovery, description, comprehension and communication, and we seek to inspire fellow researchers in these fields to embrace this emerging technology. PMID:27069653

Resource Manual on the Use of Computers in Schooling.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Technology Applications.

This resource manual is designed to provide educators with timely information on the use of computers and related technology in schools. Section one includes a review of the new Bureau of Technology Applications' goal, functions, and major programs and activities; a description of the Model Schools Program, which has been conceptually derived from…

Meaningful Use of Simulation as an Educational Method in Nursing Programs

ERIC Educational Resources Information Center

Thompson, Teri L.

2011-01-01

The purpose of this descriptive study was to examine the use of simulation technology within nursing programs leading to licensure as registered nurses. In preparation for this study the Use of Simulation Technology Inventory (USTI) was developed and based in the structure, processes, outcomes model and the current literature on simulation. The…

Logical Design of a Decision Support System to Forecast Technology, Prices and Costs for the National Communications System.

DTIC Science & Technology

1984-09-01

IN SOFTWARE DESIGN ......... .................... 39 P. PROCESS DESCRIPTIONS 43.............3 1. Model Euilding .............. 43 2. M1odel Management ... manager to model a wide variety of technology, price and cost situations without the associated overhead imposed by multiple application-specific systems...The Manager of the National Communications System (NCS) has been tasked by the National Security Telecommunications Policy of 3 August 1983 with

Engine Structures Modeling Software System (ESMOSS)

NASA Technical Reports Server (NTRS)

1991-01-01

Engine Structures Modeling Software System (ESMOSS) is the development of a specialized software system for the construction of geometric descriptive and discrete analytical models of engine parts, components, and substructures which can be transferred to finite element analysis programs such as NASTRAN. The NASA Lewis Engine Structures Program is concerned with the development of technology for the rational structural design and analysis of advanced gas turbine engines with emphasis on advanced structural analysis, structural dynamics, structural aspects of aeroelasticity, and life prediction. Fundamental and common to all of these developments is the need for geometric and analytical model descriptions at various engine assembly levels which are generated using ESMOSS.

A Historical Overview of Aeroelasticity Branch and Transonic Dynamics Tunnel Contributions to Rotorcraft Technology and Development

NASA Technical Reports Server (NTRS)

Yeager, William T., Jr.; Kvaternik, Raymond G.

2001-01-01

A historical account of the contributions of the Aeroelasticity Branch (AB) and the Langley Transonic Dynamics Tunnel (TDT) to rotorcraft technology and development since the tunnel's inception in 1960 is presented. The paper begins with a summary of the major characteristics of the TDT and a description of the unique capability offered by the TDT for testing aeroelastic models by virtue of its heavy gas test medium. This is followed by some remarks on the role played by scale models in the design and development of rotorcraft vehicles and a review of the basic scaling relationships important for designing and building dynamic aeroelastic models of rotorcraft vehicles for testing in the TDT. Chronological accounts of helicopter and tiltrotor research conducted in AB/TDT are then described in separate sections. Both experimental and analytical studies are reported and include a description of the various physical and mathematical models employed, the specific objectives of the investigations, and illustrative experimental and analytical results.

In-space production of large space systems from extraterrestrial materials: A program implementation model

NASA Technical Reports Server (NTRS)

Vontiesenhausen, G. F.

1977-01-01

A program implementation model is presented which covers the in-space construction of certain large space systems from extraterrestrial materials. The model includes descriptions of major program elements and subelements and their operational requirements and technology readiness requirements. It provides a structure for future analysis and development.

MPEG-7: standard metadata for multimedia content

NASA Astrophysics Data System (ADS)

Chang, Wo

2005-08-01

The eXtensible Markup Language (XML) metadata technology of describing media contents has emerged as a dominant mode of making media searchable both for human and machine consumptions. To realize this premise, many online Web applications are pushing this concept to its fullest potential. However, a good metadata model does require a robust standardization effort so that the metadata content and its structure can reach its maximum usage between various applications. An effective media content description technology should also use standard metadata structures especially when dealing with various multimedia contents. A new metadata technology called MPEG-7 content description has merged from the ISO MPEG standards body with the charter of defining standard metadata to describe audiovisual content. This paper will give an overview of MPEG-7 technology and what impact it can bring forth to the next generation of multimedia indexing and retrieval applications.

Attitudes of Preschool Teachers towards Using Information and Communication Technologies (ICT)

ERIC Educational Resources Information Center

Konca, Ahmet Sami; Ozel, Erdogan; Zelyurt, Hikmet

2016-01-01

The aim of the study is to determine the attitudes of preschool teachers towards using technological tools and to analyze it in terms of different variables. The research was conducted based on descriptive study model. Working group was consisted of 103 teachers working at kindergartens in city center of Kirsehir and Malatya in the fall semester…

NASA biomedical applications team. Applications of aerospace technology in biology and medicine

NASA Technical Reports Server (NTRS)

Rouse, D. J.; Beadles, R.; Beall, H. C.; Brown, J. N., Jr.; Clingman, W. H.; Courtney, M. W.; Mccartney, M.; Scearce, R. W.; Wilson, B.

1979-01-01

The use of a bipolar donor-recipient model of medical technology transfer is presented. That methodology is designed to: (1) identify medical problems and aerospace technology that in combination constitute opportunities for successful medical products; (2) obtain the early participation of industry in the transfer process; and (3) obtain acceptance by the medical community of new medical products based on aerospace technology. Problem descriptions and activity reports and the results of a market study on the tissue freezing device are presented.

77 FR 24497 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-24

... distribution and may be useful as model systems for studies of cardiovascular disease, drug metabolism and... tissue distribution and may be useful as model systems for studies of cardiovascular disease, drug..., Atherosclerosis, Metabolic Syndrome and Lipid Storage Diseases Description of Technology: Lipid droplets are key...

Concentrating Solar Power Projects - Planta Solar 10 | Concentrating Solar

Science.gov Websites

under a purely commercial approach. PS10's technologies-including glass-metal heliostats, pressurized Manufacturer (Model): Abengoa (Solucar 120) Heliostat Description: Glass-metal Tower Height: 115 m Receiver

75 FR 51823 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-23

... applications. Transforming Growth Factor Beta-1 (TGF-[beta]1) Transgenic Mouse Model Description of Technology... developed a transgenic mouse model, designated [beta]1\\glo\\, which permits conditional, gene-specific... gene by Cre recombinase allows expression of TGF-[beta]1. Thus, these mice may be cross-bred with a...

SAMICS marketing and distribution model

NASA Technical Reports Server (NTRS)

1978-01-01

A SAMICS (Solar Array Manufacturing Industry Costing Standards) was formulated as a computer simulation model. Given a proper description of the manufacturing technology as input, this model computes the manufacturing price of solar arrays for a broad range of production levels. This report presents a model for computing these marketing and distribution costs, the end point of the model being the loading dock of the final manufacturer.

Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-09-01

This report covers an assessment of 182 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. commercial buildings to identify and provide analysis on 17 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, description of technical maturity, description of non-energy benefits, description of current barriers for market adoption, and description of the technology’s applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

Finite element modeling and analysis of tires

NASA Technical Reports Server (NTRS)

Noor, A. K.; Andersen, C. M.

1983-01-01

Predicting the response of tires under various loading conditions using finite element technology is addressed. Some of the recent advances in finite element technology which have high potential for application to tire modeling problems are reviewed. The analysis and modeling needs for tires are identified. Reduction methods for large-scale nonlinear analysis, with particular emphasis on treatment of combined loads, displacement-dependent and nonconservative loadings; development of simple and efficient mixed finite element models for shell analysis, identification of equivalent mixed and purely displacement models, and determination of the advantages of using mixed models; and effective computational models for large-rotation nonlinear problems, based on a total Lagrangian description of the deformation are included.

Study of abrasive resistance of foundries models obtained with use of additive technology

NASA Astrophysics Data System (ADS)

Ol'khovik, Evgeniy

2017-10-01

A problem of determination of resistance of the foundry models and patterns from ABS (PLA) plastic, obtained by the method of 3D printing with using FDM additive technology, to abrasive wear and resistance in the environment of foundry sand mould is considered in the present study. The description of a technique and equipment for tests of castings models and patterns for wear is provided in the article. The manufacturing techniques of models with the use of the 3D printer (additive technology) are described. The scheme with vibration load was applied to samples tests. For the most qualitative research of influence of sandy mix on plastic, models in real conditions of abrasive wear have been organized. The results also examined the application of acrylic paintwork to the plastic model and a two-component coating. The practical offers and recommendation on production of master models with the use of FDM technology allowing one to reach indicators of durability, exceeding 2000 cycles of moulding in foundry sand mix, are described.

Using the MCPLXS Generator for Technology Transfer

NASA Technical Reports Server (NTRS)

Moore, Arlene A.; Dean, Edwin B.

1987-01-01

The objective of this paper is to acquaint you with some of the approaches we are taking at Langley to incorporate escalations (or de-escalations) of technology when modeling futuristic systems. Since we have a short turnaround between the time we receive enough descriptive information to start estimating the project and when the estimate is needed (the "we-want-it-yesterday syndrome"), creativity is often necessary. There is not much time available for tool development. It is expedient to use existing tools in an adaptive manner to model the situation at hand. Specifically, this paper describes the use of the RCA PRICE MCPLXS Generator to incorporate technology transfer and technology escalation in estimates for advanced space systems such as Shuttle II and NASA advanced technology vehicles. It is assumed that the reader is familiar with the RCA PRICE family of models as well as the RCA PRICE utility programs such as SCPLX, PARAM, PARASYN, and the MCPLXS Generator.

FCS Technology Investigation Overview

NASA Technical Reports Server (NTRS)

Budinger, James; Gilbert, Tricia

2007-01-01

This working paper provides an overview of the Future Communication Study (FCS) technology investigation progress. It includes a description of the methodology applied to technology evaluation; evaluation criteria; and technology screening (down select) results. A comparison of screening results with other similar technology screening activities is provided. Additional information included in this working paper is a description of in-depth studies (including characterization of the L-band aeronautical channel; L-band deployment cost assessment; and performance assessments of candidate technologies in the applicable aeronautical channel) that have been conducted to support technology evaluations. The paper concludes with a description on-going activities leading to conclusion of the technology investigation and the development of technology recommendations.

Uncovering and Explaining Variance in the Features and Outcomes of Contingent Work.

ERIC Educational Resources Information Center

Lautsch, Brenda A.

2002-01-01

Internal labor market theory and data from two case studies were used to construct four models of contingent work (integration, seasonal, separation, two tier) with different performance objectives, technology, work practices, and worker outcomes. Each model involved practices related to job descriptions, wage, rules, and career ladders that…

A Model Driven Framework to Address Challenges in a Mobile Learning Environment

ERIC Educational Resources Information Center

Khaddage, Ferial; Christensen, Rhonda; Lai, Wing; Knezek, Gerald; Norris, Cathie; Soloway, Elliot

2015-01-01

In this paper a review of the pedagogical, technological, policy and research challenges and concepts underlying mobile learning is presented, followed by a brief description of categories of implementations. A model Mobile learning framework and dynamic criteria for mobile learning implementations are proposed, along with a case study of one site…

Querying phenotype-genotype relationships on patient datasets using semantic web technology: the example of Cerebrotendinous xanthomatosis.

PubMed

Taboada, María; Martínez, Diego; Pilo, Belén; Jiménez-Escrig, Adriano; Robinson, Peter N; Sobrido, María J

2012-07-31

Semantic Web technology can considerably catalyze translational genetics and genomics research in medicine, where the interchange of information between basic research and clinical levels becomes crucial. This exchange involves mapping abstract phenotype descriptions from research resources, such as knowledge databases and catalogs, to unstructured datasets produced through experimental methods and clinical practice. This is especially true for the construction of mutation databases. This paper presents a way of harmonizing abstract phenotype descriptions with patient data from clinical practice, and querying this dataset about relationships between phenotypes and genetic variants, at different levels of abstraction. Due to the current availability of ontological and terminological resources that have already reached some consensus in biomedicine, a reuse-based ontology engineering approach was followed. The proposed approach uses the Ontology Web Language (OWL) to represent the phenotype ontology and the patient model, the Semantic Web Rule Language (SWRL) to bridge the gap between phenotype descriptions and clinical data, and the Semantic Query Web Rule Language (SQWRL) to query relevant phenotype-genotype bidirectional relationships. The work tests the use of semantic web technology in the biomedical research domain named cerebrotendinous xanthomatosis (CTX), using a real dataset and ontologies. A framework to query relevant phenotype-genotype bidirectional relationships is provided. Phenotype descriptions and patient data were harmonized by defining 28 Horn-like rules in terms of the OWL concepts. In total, 24 patterns of SWQRL queries were designed following the initial list of competency questions. As the approach is based on OWL, the semantic of the framework adapts the standard logical model of an open world assumption. This work demonstrates how semantic web technologies can be used to support flexible representation and computational inference mechanisms required to query patient datasets at different levels of abstraction. The open world assumption is especially good for describing only partially known phenotype-genotype relationships, in a way that is easily extensible. In future, this type of approach could offer researchers a valuable resource to infer new data from patient data for statistical analysis in translational research. In conclusion, phenotype description formalization and mapping to clinical data are two key elements for interchanging knowledge between basic and clinical research.

Semantic Service Design for Collaborative Business Processes in Internetworked Enterprises

NASA Astrophysics Data System (ADS)

Bianchini, Devis; Cappiello, Cinzia; de Antonellis, Valeria; Pernici, Barbara

Modern collaborating enterprises can be seen as borderless organizations whose processes are dynamically transformed and integrated with the ones of their partners (Internetworked Enterprises, IE), thus enabling the design of collaborative business processes. The adoption of Semantic Web and service-oriented technologies for implementing collaboration in such distributed and heterogeneous environments promises significant benefits. IE can model their own processes independently by using the Software as a Service paradigm (SaaS). Each enterprise maintains a catalog of available services and these can be shared across IE and reused to build up complex collaborative processes. Moreover, each enterprise can adopt its own terminology and concepts to describe business processes and component services. This brings requirements to manage semantic heterogeneity in process descriptions which are distributed across different enterprise systems. To enable effective service-based collaboration, IEs have to standardize their process descriptions and model them through component services using the same approach and principles. For enabling collaborative business processes across IE, services should be designed following an homogeneous approach, possibly maintaining a uniform level of granularity. In the paper we propose an ontology-based semantic modeling approach apt to enrich and reconcile semantics of process descriptions to facilitate process knowledge management and to enable semantic service design (by discovery, reuse and integration of process elements/constructs). The approach brings together Semantic Web technologies, techniques in process modeling, ontology building and semantic matching in order to provide a comprehensive semantic modeling framework.

TERSSE: Definition of the Total Earth Resources System for the Shuttle Era. Volume 2: An Assessment of the Current State-of-the-Art

NASA Technical Reports Server (NTRS)

1974-01-01

Results of a state-of-the-art assessment of technology areas which affect the Earth Resources Program are presented along with a functional description of the basic earth resources system. Major areas discussed include: spacecraft flight hardware, remote sensors, data processing techniques and hardware, user models, user interfaces, and operations technology.

Applications and benefits of technology in naturally fractured, low permeability reservoirs with special emphasis on results from GRI`s devonian shale and berea sand research in the appalachian basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jochen, J.E.; Hopkins, C.W.

1993-12-31

;Contents: Naturally fractured reservoir description; Geologic considerations; Shale-specific log model; Stress profiles; Berea reasearch; Benefits analysis; Summary of technologies; Novel well test methods; Natural fracture identification; Reverse drilling; Production data analysis; Fracture treatment quality control; Novel core analysis methods; and Shale well cleanouts.

An Analysis of Context-Aware Data Models for Smart Cities: Towards Fiware and Etsi Cim Emerging Data Model

NASA Astrophysics Data System (ADS)

Jara, A. J.; Bocchi, Y.; Fernandez, D.; Molina, G.; Gomez, A.

2017-09-01

Smart Cities requires the support of context-aware and enriched semantic descriptions to support a scalable and cross-domain development of smart applications. For example, nowadays general purpose sensors such as crowd monitoring (counting people in an area), environmental information (pollution, air quality, temperature, humidity, noise) etc. can be used in multiple solutions with different objectives. For that reason, a data model that offers advanced capabilities for the description of context is required. This paper presents an overview of the available technologies for this purpose and how it is being addressed by the Open and Agile Smart Cities principles and FIWARE platform through the data models defined by the ETSI ISG Context Information Management (ETSI CIM).

Active Structural Control for Aircraft Efficiency with the X-56A Aircraft

NASA Technical Reports Server (NTRS)

Ouellette, Jeffrey

2015-01-01

The X-56A Multi-Utility Technology Testbed is an experimental aircraft designed to study active control of flexible structures. The vehicle is easily reconfigured to allow for testing of different configurations. The vehicle is being used to study new sensor, actuator, modeling and controls technologies. These new technologies will allow for lighter vehicles and new configurations that exceed the efficiency currently achievable. A description of the vehicle and the current research efforts that it enables are presented.

The U.S. Market For Broadband Over Powerline, 3. edition

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2007-07-15

The report provides a study of the potential market for BPL technology in the U.S. including a look at the past, present, and future state of Broadband Over Powerline (BPL) in the U.S. The Scope of the report includes the following topics: a description of the history of powerline communications (PLC) and broadband over powerline (BPL) technology; an analysis of key drivers of BPL within the electric utility and internet access industries; an overview of BPL technology and architecture; a comparison of BPL with alternative broadband access methods; an analysis of technological, regulatory, and business barriers to BPL's success; identificationmore » of the key applications and markets for BPL; a description of business models for BPL; an analysis of key market trends in broadband internet access; a review of the market development of cable modem broadband access; profiles of major U.S. BPL market participants; and, profiles of major U.S. BPL projects.« less

Design Protocols and Analytical Strategies that Incorporate Structural Reliability Models

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.

1995-01-01

The general goal of this project is to establish design protocols that enable the engineer to analyze and predict certain types of behavior in ceramic composites. Sections of the final report addresses the following: Description of the Problem that Motivated the Technology Development, Description of the New Technology that was Developed, Unique and Novel Features of the Technology and Results/Benefits of Application (year by year accomplishments), and Utilization of New Technology in Non-Aerospace Applications. Activities for this reporting period included the development of a design analysis as part of a cooperative agreement with general Electric Aircraft Engines. The effort focused on modifying the Toughened Ceramics Analysis and Reliability Evaluation of Structures (TCARES) algorithm for use in the design of engine components fabricated from NiAl. Other activities related to the development of an ASTM standard practice for estimating Weibull parameters. The standard focuses on the evaluation and reporting of uniaxial strength data, and the estimation of probability distribution parameters for ceramics which fail in a brittle fashion.

Data-driven approach to human motion modeling with Lua and gesture description language

NASA Astrophysics Data System (ADS)

Hachaj, Tomasz; Koptyra, Katarzyna; Ogiela, Marek R.

2017-03-01

The aim of this paper is to present the novel proposition of the human motion modelling and recognition approach that enables real time MoCap signal evaluation. By motions (actions) recognition we mean classification. The role of this approach is to propose the syntactic description procedure that can be easily understood, learnt and used in various motion modelling and recognition tasks in all MoCap systems no matter if they are vision or wearable sensor based. To do so we have prepared extension of Gesture Description Language (GDL) methodology that enables movements description and real-time recognition so that it can use not only positional coordinates of body joints but virtually any type of discreetly measured output MoCap signals like accelerometer, magnetometer or gyroscope. We have also prepared and evaluated the cross-platform implementation of this approach using Lua scripting language and JAVA technology. This implementation is called Data Driven GDL (DD-GDL). In tested scenarios the average execution speed is above 100 frames per second which is an acquisition time of many popular MoCap solutions.

Partnerships Enhancing Practice: A Preliminary Model of Technology-Based Peer-to-Peer Evaluations of Teaching in Higher Education

ERIC Educational Resources Information Center

Servilio, Kathryn L.; Hollingshead, Aleksandra; Hott, Brittany L.

2017-01-01

In higher education, current teaching evaluation models typically involve senior faculty evaluating junior faculty. However, there is evidence that peer-to-peer junior faculty observations and feedback may be just as effective. This descriptive case study utilized an inductive analysis to examine experiences of six special education early career…

FY90 R&D Project Descriptions ESL (Engineering & Services Laboratory) Environics Division

DTIC Science & Technology

1989-07-01

and Development Support for Subsurface Monitoring Technology 15 19007048 Pumping and Purging Contaminants 16 19007049 Methods for Selecting In Situ...Decontamination 40 3788VW17 Treatment of Chlorinated Organics with Aboveground Bioreactors 41 3788VW18 Improved Methods for Monitoring Fuel Biodegradation 42 2...Fluoride (HF) Dispersion Model 63 21036093 Solvent Capacity Field Test Method 64 21037097 Volatile Organic Compound (VOC) Control Technology 65 21037102

The Necessity and Applicability Levels of the Courses that are Offered in the Departments of Computer Education and Instructional Technologies (CEIT)

ERIC Educational Resources Information Center

Acat, M. Bahaddin; Kilic, Abdurrahman; Girmen, Pinar; Anagun, Senegul S.

2007-01-01

The main purpose of this study is to identify the levels of the necessity and applicability of the courses offered in the Departments of Computer Education and Instructional Technologies based on the views of the fourth grade and graduated students. In the study descriptive research model was used. The population of the study were final-year and…

The Integration of an API619 Screw Compressor Package into the Industrial Internet of Things

NASA Astrophysics Data System (ADS)

Milligan, W. J.; Poli, G.; Harrison, D. K.

2017-08-01

The Industrial Internet of Things (IIoT) is the industrial subset of the Internet of Things (IoT). IIoT incorporates big data technology, harnessing the instrumentation data, machine to machine communication and automation technologies that have existed in industrial settings for years. As industry in general trends towards the IIoT and as the screw compressor packages developed by Howden Compressors are designed with a minimum design life of 25 years, it is imperative this technology is embedded immediately. This paper provides the reader with a description on the Industrial Internet of Things before moving onto describing the scope of the problem for an organisation like Howden Compressors who deploy multiple compressor technologies across multiple locations and focuses on the critical measurements particular to high specification screw compressor packages. A brief analysis of how this differs from high volume package manufacturers deploying similar systems is offered. Then follows a description on how the measured information gets from the tip of the instrument in the process pipework or drive train through the different layers, with a description of each layer, into the final presentation layer. The functions available within the presentation layer are taken in turn and the benefits analysed with specific focus on efficiency and availability. The paper concludes with how packagers adopting the IIoT can not only optimise their package but by utilising the machine learning technology and pattern detection applications can adopt completely new business models.

Fiber-optic instrumentation: Cryogenic sensor model description. [for measurement of conditions in cryogenic liquid propellant tanks

NASA Technical Reports Server (NTRS)

Sharma, M. M.

1979-01-01

An assessment and determination of technology requirements for developing a demonstration model to evaluate feasibility of practical cryogenic liquid level, pressure, and temperature sensors is presented. The construction of a demonstration model to measure characteristics of the selected sensor and to develop test procedures are discussed as well as the development of an appropriate electronic subsystem to operate the sensors.

Putting TPACK on the Radar: A Visual Quantitative Model for Tracking Growth of Essential Teacher Knowledge

ERIC Educational Resources Information Center

Colvin, Julien C.; Tomayko, Ming C.

2015-01-01

Since Mishra and Koehler's (2006) description of technological pedagogical content knowledge (also known as TPACK), scholars have analyzed the various paths preservice and in-service teachers can take to develop their knowledge in each of the subdomains. However, the model of the overall framework can be confusing to teachers, as Venn diagrams are…

Objectively Determining the Educational Potential of Computer and Video-Based Courseware; or, Producing Reliable Evaluations Despite the Dog and Pony Show.

ERIC Educational Resources Information Center

Barrett, Andrew J.; And Others

The Center for Interactive Technology, Applications, and Research at the College of Engineering of the University of South Florida (Tampa) has developed objective and descriptive evaluation models to assist in determining the educational potential of computer and video courseware. The computer-based courseware evaluation model and the video-based…

A thermodynamic description for water, hydrogen fluoride and hydrogen dissolutions in cryolite-base molten salts.

PubMed

Wang, Kun; Chartrand, Patrice

2018-06-15

This paper presents a quantitative thermodynamic description for water, hydrogen fluoride and hydrogen dissolutions in cryolite-base molten salts, which is of technological importance to the Hall-Héroult electrolytic aluminum extraction cell. The Modified Quasichemical Model in the Quadruplet Approximation (MQMQA), as used to treat a large variety of molten salt systems, was adopted to thermodynamically describe the present liquid phase; all solid solutions were modeled using the Compound Energy Formalism (CEF); the gas phase was thermodynamically treated as an ideal mixture of all possible species. The model parameters were mainly obtained by critical evaluations and optimizations of thermodynamic and phase equilibrium data available from relative experimental measurements and theoretical predictions (first-principles calculations and empirical estimations) for the lower-order subsystems. These optimized model parameters were thereafter merged within the Kohler/Toop interpolation scheme, facilitating the prediction of gas solubility (H2O, HF and H2) in multicomponent cryolite-base molten salts using the FactSage thermochemical software. Several interesting diagrams were finally obtained in order to provide useful information for the industrial partners dedicated to the Hall-Héroult electrolytic aluminum production or other molten-salt technologies (the purification process and electroslag refining).

The Objectives of NASA's Living with a Star Space Environment Testbed

NASA Technical Reports Server (NTRS)

Barth, Janet L.; LaBel, Kenneth A.; Brewer, Dana; Kauffman, Billy; Howard, Regan; Griffin, Geoff; Day, John H. (Technical Monitor)

2001-01-01

NASA is planning to fly a series of Space Environment Testbeds (SET) as part of the Living With A Star (LWS) Program. The goal of the testbeds is to improve and develop capabilities to mitigate and/or accommodate the affects of solar variability in spacecraft and avionics design and operation. This will be accomplished by performing technology validation in space to enable routine operations, characterize technology performance in space, and improve and develop models, guidelines and databases. The anticipated result of the LWS/SET program is improved spacecraft performance, design, and operation for survival of the radiation, spacecraft charging, meteoroid, orbital debris and thermosphere/ionosphere environments. The program calls for a series of NASA Research Announcements (NRAs) to be issued to solicit flight validation experiments, improvement in environment effects models and guidelines, and collateral environment measurements. The selected flight experiments may fly on the SET experiment carriers and flights of opportunity on other commercial and technology missions. This paper presents the status of the project so far, including a description of the types of experiments that are intended to fly on SET-1 and a description of the SET-1 carrier parameters.

Advanced decision modeling for real time variable tolling : development and testing of a data collection platform.

DOT National Transportation Integrated Search

2012-06-01

Our current ability to forecast demand on tolled facilities has not kept pace with advances in decision sciences and : technological innovation. The current forecasting methods suffer from lack of descriptive power of actual behavior because : of the...

The approach to detection and application of the company’s technological competences to form a business-model

NASA Astrophysics Data System (ADS)

Chursin, A. A.; Kashirin, A. I.; Strenalyuk, V. V.; Semenov, A. S.; Ostrovskaya, A. A.; Kokuytseva, T. V.

2018-02-01

The most important condition for increasing the competitiveness of business is the formation, retention, and development of key competences of the organization, which reflect the competitive advantage. This problem is especially urgent for high-tech industries, which are the most sensitive to all kinds of changes and innovations. The ways of applying the company’s technological competences to form a business model, the proper form of competence description and analysis on the example of the company “Teplolux” are considered. The following from is recommended to use in IT solutions for competence databases.

Department of the Navy Supporting Data for Fiscal Year 1983 Budget Estimates Descriptive Summaries Submitted to Congress February 1982. Research, Development, Test & Evaluation, Navy. Book 1 of 3. Technology Base, Advanced Technology Development, Strategic Programs.

DTIC Science & Technology

1982-02-01

optimization methods have been developed for problems in production and distribution modeling including design and evaluation of storage alternatives under...and winds using high frequency , X-band doppler, pulse -limited, and Delta-K radars. Development of millimeter-wave radiometric imaging systems and...generic system design concept for a system capable of defending the Fleet from the high angle threat 1.4 The first model of the drive system for a

SEACAS Theory Manuals: Part III. Finite Element Analysis in Nonlinear Solid Mechanics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laursen, T.A.; Attaway, S.W.; Zadoks, R.I.

1999-03-01

This report outlines the application of finite element methodology to large deformation solid mechanics problems, detailing also some of the key technological issues that effective finite element formulations must address. The presentation is organized into three major portions: first, a discussion of finite element discretization from the global point of view, emphasizing the relationship between a virtual work principle and the associated fully discrete system, second, a discussion of finite element technology, emphasizing the important theoretical and practical features associated with an individual finite element; and third, detailed description of specific elements that enjoy widespread use, providing some examples ofmore » the theoretical ideas already described. Descriptions of problem formulation in nonlinear solid mechanics, nonlinear continuum mechanics, and constitutive modeling are given in three companion reports.« less

Querying phenotype-genotype relationships on patient datasets using semantic web technology: the example of cerebrotendinous xanthomatosis

PubMed Central

2012-01-01

Background Semantic Web technology can considerably catalyze translational genetics and genomics research in medicine, where the interchange of information between basic research and clinical levels becomes crucial. This exchange involves mapping abstract phenotype descriptions from research resources, such as knowledge databases and catalogs, to unstructured datasets produced through experimental methods and clinical practice. This is especially true for the construction of mutation databases. This paper presents a way of harmonizing abstract phenotype descriptions with patient data from clinical practice, and querying this dataset about relationships between phenotypes and genetic variants, at different levels of abstraction. Methods Due to the current availability of ontological and terminological resources that have already reached some consensus in biomedicine, a reuse-based ontology engineering approach was followed. The proposed approach uses the Ontology Web Language (OWL) to represent the phenotype ontology and the patient model, the Semantic Web Rule Language (SWRL) to bridge the gap between phenotype descriptions and clinical data, and the Semantic Query Web Rule Language (SQWRL) to query relevant phenotype-genotype bidirectional relationships. The work tests the use of semantic web technology in the biomedical research domain named cerebrotendinous xanthomatosis (CTX), using a real dataset and ontologies. Results A framework to query relevant phenotype-genotype bidirectional relationships is provided. Phenotype descriptions and patient data were harmonized by defining 28 Horn-like rules in terms of the OWL concepts. In total, 24 patterns of SWQRL queries were designed following the initial list of competency questions. As the approach is based on OWL, the semantic of the framework adapts the standard logical model of an open world assumption. Conclusions This work demonstrates how semantic web technologies can be used to support flexible representation and computational inference mechanisms required to query patient datasets at different levels of abstraction. The open world assumption is especially good for describing only partially known phenotype-genotype relationships, in a way that is easily extensible. In future, this type of approach could offer researchers a valuable resource to infer new data from patient data for statistical analysis in translational research. In conclusion, phenotype description formalization and mapping to clinical data are two key elements for interchanging knowledge between basic and clinical research. PMID:22849591

Understanding Intention to Use Electronic Information Resources: A Theoretical Extension of the Technology Acceptance Model (TAM)

PubMed Central

Tao, Donghua

2008-01-01

This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students’ intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students’ intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation. PMID:18999300

Understanding intention to use electronic information resources: A theoretical extension of the technology acceptance model (TAM).

PubMed

Tao, Donghua

2008-11-06

This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students' intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students' intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation.

Simulation of air pollution due to marine engines

NASA Astrophysics Data System (ADS)

Stan, L. C.

2017-08-01

This paperwork tried to simulate the combustion inside the marine engines using the newest computer methods and technologies with the result of a diverse and rich palette of solutions, extremely useful for the study and prediction of complex phenomena of the fuel combustion. The paperwork is contributing to the theoretical systematization of the area of interest bringing into attention a thoroughly inventory of the thermodynamic description of the phenomena which take place in the combustion process into the marine diesel engines; to the in depth multidimensional combustion models description along with the interdisciplinary phenomenology taking place in the combustion models; to the FEA (Finite Elements Method) modelling for the combustion chemistry in the nonpremixed mixtures approach considered too; the CFD (Computational Fluid Dynamics) model was issued for the combustion area and a rich palette of results interesting for any researcher of the process.

Modeling of Electrochemical Process for the Treatment of Wastewater Containing Organic Pollutants

NASA Astrophysics Data System (ADS)

Rodrigo, Manuel A.; Cañizares, Pablo; Lobato, Justo; Sáez, Cristina

Electrocoagulation and electrooxidation are promising electrochemical technologies that can be used to remove organic pollutants contained in wastewaters. To make these technologies competitive with the conventional technologies that are in use today, a better understanding of the processes involved must be achieved. In this context, the development of mathematical models that are consistent with the processes occurring in a physical system is a relevant advance, because such models can help to understand what is happening in the treatment process. In turn, a more detailed knowledge of the physical system can be obtained, and tools for a proper design of the processes, or for the analysis of operating problems, are attained. The modeling of these technologies can be carried out using single-variable or multivariable models. Likewise, the position dependence of the model species can be described with different approaches. In this work, a review of the basics of the modeling of these processes and a description of several representative models for electrochemical oxidation and coagulation are carried out. Regarding electrooxidation, two models are described: one which summarizes the pollution of a wastewater in only one model species and that considers a macroscopic approach to formulate the mass balances and other that considers more detailed profile of concentration to describe the time course of pollutants and intermediates through a mixed maximum gradient/macroscopic approach. On the topic of electrochemical coagulation, two different approaches are also described in this work: one that considers the hydrodynamic conditions as the main factor responsible for the electrochemical coagulation processes and the other that considers the chemical interaction of the reagents and the pollutants as the more significant processes in the description of the electrochemical coagulation of organic compounds. In addition, in this work it is also described a multivariable model for the electrodissolution of anodes (first stage in electrocoagulation processes). This later model use a mixed macroscopic/maximum gradient approach to describe the chemical and electrochemical processes and it also assumes that the rates of all processes are very high, and that they can be successfully modeled using pseudoequilibrium approaches.

Software Technology for Adaptable, Reliable Systems (STARS). Repository Integration AdaKNET Software User’s Manual

DTIC Science & Technology

1990-10-03

9 4.1. Mapping the Conceptual Model to the Implementation ................................................ 9 4.2. Overview of...browser-editor application. Finally, appendix A provides a detailed description of the AdaKNET conceptual model; users of AdaKNET should fami...provide a brief summary of the semantics of the underlying conceptual model implemented by AdaKNET, use of the AdaKNET ADT will require a more thorough

ETA-MACRO: A user's guide

NASA Astrophysics Data System (ADS)

Manne, A. S.

1981-02-01

The ETA-MACRO model is designed to estimate the extent of two way linkage between the energy sector and the balance of the economy. It represents a merger between ETA (a process analysis for energy technology assessment) together with a macroeconomic growth model providing for substitution between capital, labor, and energy inputs. The ETA-MACRO allows explicitly for: (1) energy economy interactions; (2) cost effective conservation; (3) interfuel substitution, and (4) new supply technologies, each with its own difficulties and uncertainties on dates and rates of introduction. This user's guide includes an overview of the model, an illustrative application to long term US energy projections, and technical descriptions of the macro and ETA submodels. It also includes an analysis of how market penetration rates may be related to the profitability of new technologies. Finally, the appendices provide a detailed guide to the computer implementation.

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

Local network assessment

NASA Astrophysics Data System (ADS)

Glen, D. V.

1985-04-01

Local networks, related standards activities of the Institute of Electrical and Electronics Engineers the American National Standards Institute and other elements are presented. These elements include: (1) technology choices such as topology, transmission media, and access protocols; (2) descriptions of standards for the 802 local area networks (LAN's); high speed local networks (HSLN's) and military specification local networks; and (3) intra- and internetworking using bridges and gateways with protocols Interconnection (OSI) reference model. The convergence of LAN/PBX technology is also described.

Optimal free descriptions of many-body theories

NASA Astrophysics Data System (ADS)

Turner, Christopher J.; Meichanetzidis, Konstantinos; Papić, Zlatko; Pachos, Jiannis K.

2017-04-01

Interacting bosons or fermions give rise to some of the most fascinating phases of matter, including high-temperature superconductivity, the fractional quantum Hall effect, quantum spin liquids and Mott insulators. Although these systems are promising for technological applications, they also present conceptual challenges, as they require approaches beyond mean-field and perturbation theory. Here we develop a general framework for identifying the free theory that is closest to a given interacting model in terms of their ground-state correlations. Moreover, we quantify the distance between them using the entanglement spectrum. When this interaction distance is small, the optimal free theory provides an effective description of the low-energy physics of the interacting model. Our construction of the optimal free model is non-perturbative in nature; thus, it offers a theoretical framework for investigating strongly correlated systems.

Using Innovation Diffusion Theory and the Technolgy Acceptance Model to Evaluate the Security of Wireless Mobile Devices at a Post Secondary Institution

ERIC Educational Resources Information Center

Feliciano-Torres, Hector L.

2017-01-01

The purpose of this quantitative, descriptive non experimental study was to investigate the use of wireless mobile network devices at a post-secondary institution using the innovation diffusion theory (IDT) and technology acceptance model (TAM) as background theories. The researcher intended to explore how students and personnel of the institution…

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

NASA Technical Reports Server (NTRS)

Young, Roy M.; Montgomery, Edward E.; Montgomery, Sandy; Adams, Charles L.

2007-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 separate, independent system design and development hardware demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L'Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter ground demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators. Descriptions of the system designs for both the ATK and L'Garde systems will be presented. Changes, additions and evolution of the system designs will be highlighted. A description of the modeling and analyses activities performed by both teams, as well as testing conducted to raise the TRL of solar sail technology will be presented. A summary of the results of model correlation activities will be presented. Finally, technology gaps identified during the assessment and gap closure plans will be presented, along with "lessons learned", subsequent planning activities and validation flight opportunities for solar sail propulsion technology.

Improved object optimal synthetic description, modeling, learning, and discrimination by GEOGINE computational kernel

NASA Astrophysics Data System (ADS)

Fiorini, Rodolfo A.; Dacquino, Gianfranco

2005-03-01

GEOGINE (GEOmetrical enGINE), a state-of-the-art OMG (Ontological Model Generator) based on n-D Tensor Invariants for n-Dimensional shape/texture optimal synthetic representation, description and learning, was presented in previous conferences elsewhere recently. Improved computational algorithms based on the computational invariant theory of finite groups in Euclidean space and a demo application is presented. Progressive model automatic generation is discussed. GEOGINE can be used as an efficient computational kernel for fast reliable application development and delivery in advanced biomedical engineering, biometric, intelligent computing, target recognition, content image retrieval, data mining technological areas mainly. Ontology can be regarded as a logical theory accounting for the intended meaning of a formal dictionary, i.e., its ontological commitment to a particular conceptualization of the world object. According to this approach, "n-D Tensor Calculus" can be considered a "Formal Language" to reliably compute optimized "n-Dimensional Tensor Invariants" as specific object "invariant parameter and attribute words" for automated n-Dimensional shape/texture optimal synthetic object description by incremental model generation. The class of those "invariant parameter and attribute words" can be thought as a specific "Formal Vocabulary" learned from a "Generalized Formal Dictionary" of the "Computational Tensor Invariants" language. Even object chromatic attributes can be effectively and reliably computed from object geometric parameters into robust colour shape invariant characteristics. As a matter of fact, any highly sophisticated application needing effective, robust object geometric/colour invariant attribute capture and parameterization features, for reliable automated object learning and discrimination can deeply benefit from GEOGINE progressive automated model generation computational kernel performance. Main operational advantages over previous, similar approaches are: 1) Progressive Automated Invariant Model Generation, 2) Invariant Minimal Complete Description Set for computational efficiency, 3) Arbitrary Model Precision for robust object description and identification.

Telecom Modeling with ChatterBell.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jrad, Ahmad M.; Kelic, Andjelka

This document provides a description and user manual for the ChatterBell voice telecom modeling and simulation capability. The intended audience consists of network planners and practitioners who wish to use the tool to model a particular voice network and analyze its behavior under varying assumptions and possible failure conditions. ChatterBell is built on top of the N-SMART voice simulation and visualization suite that was developed through collaboration between Sandia National Laboratories and Bell Laboratories of Lucent Technologies. The new and improved modeling and simulation tool has been modified and modernized to incorporate the latest development in the telecom world includingmore » the widespread use of VoIP technology. In addition, ChatterBell provides new commands and modeling capabilities that were not available in the N-SMART application.« less

A Secondary/Postsecondary Program to Prepare Master Technicians.

ERIC Educational Resources Information Center

Phillips, Cecil G., Jr.; Kuchinsky, Charlotte A.

A description is provided of the "Secondary/Postsecondary Program to Prepare Master Technicians," a state-funded pilot project designed to develop a "2 + 2" model in the field of electronics/electromechanical technology. Section I provides an overview of the project, a copy of the project agreement, lists of local education…

Getting AM Up to Speed Across the Army Life Cycle

DTIC Science & Technology

2016-12-01

acquisition domain, more engi- neering work is needed to better define what standards should be used in Data Item Descriptions (DID) and Contract Data... compared to traditional parts replacement using procurement. While cold spray AM technology does not necessarily require the use of 3D models, to fully

Design of conveyor type machine with numerical control for manufacturing of extrusion thermoplastic thread

NASA Astrophysics Data System (ADS)

Gorbunova, T. N.; Koltunov, I. I.; Tumanova, M. B.

2018-05-01

The article is devoted to the development of a model and control program for a 3D printer working based on extrusion technology. The article contains descriptions of all components of the machine and blocks of the interface of the control program.

A Plan for Environmental/Energy Education in the Public Community College System of Illinois.

ERIC Educational Resources Information Center

National Field Research Center Inc., Iowa City, IA.

This report examines the environmental training efforts of community colleges in Illinois. The text includes a series of nine model environmental protection curricula and outlines appropriate course descriptions for pollution control and abatement, radiation, and general environmental technology. A final section offers recommendations which…

77 FR 69866 - Government-Owned Inventions; Availability for Licensing

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-21

... for Diabetes and Obesity Description of Technology: This invention is directed to adeno- associated virus (AAV) vector delivery of exendin-4 (Ex-4) to salivary glands as treatment for diabetes and obesity... and weight profile in two rat models of obesity and type 2 diabetes. Further, AAV-mediated delivery of...

Cooling tower plume - model and experiment

NASA Astrophysics Data System (ADS)

Cizek, Jan; Gemperle, Jiri; Strob, Miroslav; Nozicka, Jiri

The paper discusses the description of the simple model of the, so-called, steam plume, which in many cases forms during the operation of the evaporative cooling systems of the power plants, or large technological units. The model is based on semi-empirical equations that describe the behaviour of a mixture of two gases in case of the free jet stream. In the conclusion of the paper, a simple experiment is presented through which the results of the designed model shall be validated in the subsequent period.

An Analysis of the President’s Budgetary Proposals for Fiscal Year 2005

DTIC Science & Technology

2004-03-01

productivity —which represents the state of technological know-how. The model is not forward-looking—people base their decisions entirely on...Bottles: A Meta-Analysis of Ricardian Equivalence,” Southern Economic Journal, vol. 64, no. 3 (January 1998), pp. 713-727. APPENDIX B THE MODELS ...Under the President’s Budget and UnderCBO’s Baseline Policy Assumptions 25How Fiscal Policy Affects the Economy 28 A Description of CBO’s Models and

Clean Coal Technology Demonstration Program: Program Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Experimental investigation and numerical modelling of 3D radial compressor stage and influence of the technological holes on the working characteristics

NASA Astrophysics Data System (ADS)

Matas, Richard; Syka, Tomáš; Hurda, Lukáš

2018-06-01

The article deals with a description of results from research and development of a radial compressor stage with 3D rotor blades. The experimental facility and the measurement and evaluation process is described briefly in the first part. The comparison of measured and computed characteristics can be found in the second part. The last part of this contribution is the evaluation of the rotor blades technological holes influence on the compressor stage characteristics.

A preliminary estimate of future communications traffic for the electric power system

NASA Technical Reports Server (NTRS)

Barnett, R. M.

1981-01-01

Diverse new generator technologies using renewable energy, and to improve operational efficiency throughout the existing electric power systems are presented. A description of a model utility and the information transfer requirements imposed by incorporation of dispersed storage and generation technologies and implementation of more extensive energy management are estimated. An example of possible traffic for an assumed system, and an approach that can be applied to other systems, control configurations, or dispersed storage and generation penetrations is provided.

Calibration and Validation of the Sage Software Cost/Schedule Estimating System to United States Air Force Databases

DTIC Science & Technology

1997-09-01

factor values are identified. For SASET, revised cost estimating relationships are provided ( Apgar et al., 1991). A 1991 AFIT thesis by Gerald Ourada...description of the model is a paragraph directly quoted from the user’s manual . This is not to imply that a lack of a thorough analysis indicates...constraints imposed by the system. The effective technology rating is computed from the basic technology rating by the following equation ( Apgar et al., 1991

Baseband processor development/test performance for 30/20 GHz SS-TDMA communication system

NASA Technical Reports Server (NTRS)

Brown, L.; Sabourin, D.; Attwood, S.

1984-01-01

The baseband processor (BBP) development for the 30/20 GHz Satellite Communication System is described. The SS-TDMA concept for future satellite communications is reviewed, describing the overall system, the satellite payload, and the frequency plan. A brief general description of the BBP is given, and the proof-of-concept model of the BBP is summarized. Key technologies and custom LSI developed for the BBP are listed. Finally, key technology developments and test data are reported for the BBP.

The role of technology and engineering models in transforming healthcare.

PubMed

Pavel, Misha; Jimison, Holly Brugge; Wactlar, Howard D; Hayes, Tamara L; Barkis, Will; Skapik, Julia; Kaye, Jeffrey

2013-01-01

The healthcare system is in crisis due to challenges including escalating costs, the inconsistent provision of care, an aging population, and high burden of chronic disease related to health behaviors. Mitigating this crisis will require a major transformation of healthcare to be proactive, preventive, patient-centered, and evidence-based with a focus on improving quality-of-life. Information technology, networking, and biomedical engineering are likely to be essential in making this transformation possible with the help of advances, such as sensor technology, mobile computing, machine learning, etc. This paper has three themes: 1) motivation for a transformation of healthcare; 2) description of how information technology and engineering can support this transformation with the help of computational models; and 3) a technical overview of several research areas that illustrate the need for mathematical modeling approaches, ranging from sparse sampling to behavioral phenotyping and early detection. A key tenet of this paper concerns complementing prior work on patient-specific modeling and simulation by modeling neuropsychological, behavioral, and social phenomena. The resulting models, in combination with frequent or continuous measurements, are likely to be key components of health interventions to enhance health and wellbeing and the provision of healthcare.

U-10Mo Baseline Fuel Fabrication Process Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

The incidence of technological stress among baccalaureate nurse educators using technology during course preparation and delivery.

PubMed

Burke, Mary S

2009-01-01

The concept of technology-related stress was first introduced in the 1980s when computers became more prevalent in the business and academic world. Nurse educators have been impacted by the rapid changes in technology in recent years. A review of the literature revealed no research studies that have been conducted to investigate the incidence of technological stress among nurse educators. The purpose of this descriptive-correlational study was to describe the technological stressors that Louisiana baccalaureate nurse educators experienced while teaching nursing theory courses. A researcher-developed questionnaire, the nurse educator technostress scale (NETS) was administered to a census sample of 311 baccalaureate nurse educators in Louisiana. Findings revealed that Louisiana baccalaureate nurse educators are experiencing technological stress. The variable, perceived administrative support for use of technology in the classroom, was a significant predictor in a regression model predicting Louisiana baccalaureate nurse educators' technological stress (F=14.157, p<.001).

Knowledge network model of the energy consumption in discrete manufacturing system

NASA Astrophysics Data System (ADS)

Xu, Binzi; Wang, Yan; Ji, Zhicheng

2017-07-01

Discrete manufacturing system generates a large amount of data and information because of the development of information technology. Hence, a management mechanism is urgently required. In order to incorporate knowledge generated from manufacturing data and production experience, a knowledge network model of the energy consumption in the discrete manufacturing system was put forward based on knowledge network theory and multi-granularity modular ontology technology. This model could provide a standard representation for concepts, terms and their relationships, which could be understood by both human and computer. Besides, the formal description of energy consumption knowledge elements (ECKEs) in the knowledge network was also given. Finally, an application example was used to verify the feasibility of the proposed method.

Technology for the Future: In-Space Technology Experiments Program, part 1

NASA Technical Reports Server (NTRS)

Breckenridge, Roger A. (Compiler); Clark, Lenwood G. (Compiler); Willshire, Kelli F. (Compiler); Beck, Sherwin M. (Compiler); Collier, Lisa D. (Compiler)

1991-01-01

The purpose of the Office of Aeronautics and Space Technology (OAST) In-Space Technology Experiment Program (In-STEP) 1988 Workshop was to identify and prioritize technologies that are critical for future national space programs and require validation in the space environment, and review current NASA (In-Reach) and industry/university (Out-Reach) experiments. A prioritized list of the critical technology needs was developed for the following eight disciplines: structures; environmental effects; power systems and thermal management; fluid management and propulsion systems; automation and robotics; sensors and information systems; in-space systems; and humans in space. This is part one of two parts and is the executive summary and experiment description. The executive summary portion contains keynote addresses, strategic planning information, and the critical technology needs summaries for each theme. The experiment description portion contains brief overviews of the objectives, technology needs and backgrounds, descriptions, and development schedules for current industry, university, and NASA space flight technology experiments.

Existing and Emerging Technologies in Education: A Descriptive Overview. CREATE Monograph Series.

ERIC Educational Resources Information Center

Bakke, Thomas W.

Second in a series of six monographs on the use of new technologies in the instruction of learning disabled students, the paper offers a descriptive overview of new technologies. Topics addressed include the following: (1) techniques for sharing computer resources (including aspects of networking, sharing information through databases, and the use…

The Information Bazaar; Sixth Annual National Colloquium on Information Retrieval, May 8-9, 1969, Philadelphia, Pennsylvania.

ERIC Educational Resources Information Center

Schultz, Louise, Ed.

The 31 papers in this proceedings cover social as well as technical issues, mathematical models and formal logic systems, applications descriptions, program design, cost analysis, and predictions. The papers are grouped into sessions including: privacy and information technology, describing documents, information dissemination systems, public and…

The Lom Approach--a Call for Concern?

ERIC Educational Resources Information Center

Armitage, Nicholas; Bowerman, Chris

2005-01-01

The LOM (Learning Object Model) approach to courseware design seems to be driven by a desire to increase access to education as well as use technology to enable a higher staff-student ratio than is currently possible. The LOM standard involves the use of standard metadata descriptions of content and adaptive content engines to deliver the…

The LOM Approach -- A CALL for Concern?

ERIC Educational Resources Information Center

Armitage, Nicholas; Bowerman, Chris

2005-01-01

The LOM (Learning Object Model) approach to courseware design seems to be driven by a desire to increase access to education as well as use technology to enable a higher staff-student ratio than is currently possible. The LOM standard involves the use of standard metadata descriptions of content and adaptive content engines to deliver the…

Effects of Educational Beliefs on Attitudes towards Using Computer Technologies

ERIC Educational Resources Information Center

Onen, Aysem Seda

2012-01-01

This study, aiming to determine the relationship between pre-service teachers' beliefs about education and their attitudes towards utilizing computers and internet, is a descriptive study in scanning model. The sampling of the study consisted of 270 pre-service teachers. The potential relationship between the beliefs of pre-service teachers about…

DEMONSTRATION OF NATURAL GAS REBURN FOR NOX EMISSIONS REDUCTION AT OHIO EDISON COMPANY'S CYCLONE-FIRED NILES PLANT UNIT NO. 1

EPA Science Inventory

The report describes a demonstration of reburning on a cyclone-fired boiler. The project included a review of reburn technology, aerodynamic flow model testing, long-term load dispatch testing, and boiler tube wall thickness monitoring. The report also contains a description of O...

Analysis of contour images using optics of spiral beams

NASA Astrophysics Data System (ADS)

Volostnikov, V. G.; Kishkin, S. A.; Kotova, S. P.

2018-03-01

An approach is outlined to the recognition of contour images using computer technology based on coherent optics principles. A mathematical description of the recognition process algorithm and the results of numerical modelling are presented. The developed approach to the recognition of contour images using optics of spiral beams is described and justified.

Gully measurement strategies in a pixel using python

NASA Astrophysics Data System (ADS)

Wells, Robert; Momm, Henrique; Bennett, Sean; Dabney, Seth

2015-04-01

Gullies are often the single largest sediment sources within the landscape; however, measurement and process description of these channels presents challenges that have limited complete understanding. A strategy currently being employed in the field and laboratory to measure topography of gullies utilizes inexpensive, off-the-shelf cameras and software. Photogrammetry may be entering an enlightened period, as users have numerous choices (cameras, lenses, and software) and many are utilizing the technology to define their surroundings; however, the key for those seeking answers will be what happens once topography is represented as a three-dimensional digital surface model. Perhaps the model can be compared with another model to visualize change, either in topography or in vegetation cover, or both. With these models of our landscape, prediction technology should be rejuvenated and/or reinvented. Over the past several decades, researchers have endeavored to capture the erosion process and transfer these observations through oral and written word. Several have hypothesized a fundamental system for gully expression in the landscape; however, this understanding has not transferred well into our prediction technology. Unlike many materials, soils often times do not behave in a predictable fashion. Which soil physical properties lend themselves to erosion process description? In most cases, several disciplines are required to visualize the erosion process and its impact on our landscape. With a small camera, the landscape becomes more accessible and this accessibility will lead to a deeper understanding and development of uncompromised erosion theory. Why? Conservation of our soil resources is inherently linked to a complete understanding of soil wasting.

An XML Data Model for Inverted Image Indexing

NASA Astrophysics Data System (ADS)

So, Simon W.; Leung, Clement H. C.; Tse, Philip K. C.

2003-01-01

The Internet world makes increasing use of XML-based technologies. In multimedia data indexing and retrieval, the MPEG-7 standard for Multimedia Description Scheme is specified using XML. The flexibility of XML allows users to define other markup semantics for special contexts, construct data-centric XML documents, exchange standardized data between computer systems, and present data in different applications. In this paper, the Inverted Image Indexing paradigm is presented and modeled using XML Schema.

Middle School Teachers' Descriptions of Their Level of Competency in the National Education Technology Standards for Teachers

ERIC Educational Resources Information Center

Sam, Daisy

2011-01-01

The purpose of this mixed methods study was to investigate urban middle school teachers' descriptions of their competency in the current National Education Technology Standards for Teachers (NETS-T). The study also investigated how urban middle school teachers currently use technology to support their teaching and student learning. Research…

Addressing Learning Style Criticism: The Unified Learning Style Model Revisited

NASA Astrophysics Data System (ADS)

Popescu, Elvira

Learning style is one of the individual differences that play an important but controversial role in the learning process. This paper aims at providing a critical analysis regarding learning styles and their use in technology enhanced learning. The identified criticism issues are addressed by reappraising the so called Unified Learning Style Model (ULSM). A detailed description of the ULSM components is provided, together with their rationale. The practical applicability of the model in adaptive web-based educational systems and its advantages versus traditional learning style models are also outlined.

Thermodynamic description of multicomponent nickel-base superalloys containing aluminum, chromium, ruthenium and platinum: A computational thermodynamic approach coupled with experiments

NASA Astrophysics Data System (ADS)

Zhu, Jun

Ru and Pt are candidate additional component for improving the high temperature properties of Ni-base superalloys. A thermodynamic description of the Ni-Al-Cr-Ru-Pt system, serving as an essential knowledge base for better alloy design and processing control, was developed in the present study by means of thermodynamic modeling coupled with experimental investigations of phase equilibria. To deal with the order/disorder transition occurring in the Ni-base superalloys, a physical sound model, Cluster/Site Approximation (CSA) was used to describe the fcc phases. The CSA offers computational advantages, without loss of accuracy, over the Cluster Variation Method (CVM) in the calculation of multicomponent phase diagrams. It has been successfully applied to fcc phases in calculating technologically important Ni-Al-Cr phase diagrams. Our effort in this study focused on the two key ternary systems: Ni-Al-Ru and Ni-Al-Pt. The CSA calculated Ni-Al-Ru ternary phase diagrams are in good agreement with the experimental results in the literature and from the current study. A thermodynamic description of quaternary Ni-Al-Cr-Ru was obtained based on the descriptions of the lower order systems and the calculated results agree with experimental data available in literature and in the current study. The Ni-Al-Pt system was thermodynamically modeled based on the limited experimental data available in the literature and obtained from the current study. With the help of the preliminary description, a number of alloy compositions were selected for further investigation. The information obtained was used to improve the current modeling. A thermodynamic description of the Ni-Al-Cr-Pt quaternary was then obtained via extrapolation from its constituent lower order systems. The thermodynamic description for Ni-base superalloy containing Al, Cr, Ru and Pt was obtained via extrapolation. It is believed to be reliable and useful to guide the alloy design and further experimental investigation.

The importance of educational theories for facilitating learning when using technology in medical education.

PubMed

Sandars, John; Patel, Rakesh S; Goh, Poh Sun; Kokatailo, Patricia K; Lafferty, Natalie

2015-01-01

There is an increasing use of technology for teaching and learning in medical education but often the use of educational theory to inform the design is not made explicit. The educational theories, both normative and descriptive, used by medical educators determine how the technology is intended to facilitate learning and may explain why some interventions with technology may be less effective compared with others. The aim of this study is to highlight the importance of medical educators making explicit the educational theories that inform their design of interventions using technology. The use of illustrative examples of the main educational theories to demonstrate the importance of theories informing the design of interventions using technology. Highlights the use of educational theories for theory-based and realistic evaluations of the use of technology in medical education. An explicit description of the educational theories used to inform the design of an intervention with technology can provide potentially useful insights into why some interventions with technology are more effective than others. An explicit description is also an important aspect of the scholarship of using technology in medical education.

Information technology acceptance in health information management.

PubMed

Abdekhoda, M; Ahmadi, M; Dehnad, A; Hosseini, A F

2014-01-01

User acceptance of information technology has been a significant area of research for more than two decades in the field of information technology. This study assessed the acceptance of information technology in the context of Health Information Management (HIM) by utilizing Technology Acceptance Model (TAM) which was modified and applied to assess user acceptance of health information technology as well as viability of TAM as a research construct in the context of HIM. This was a descriptive- analytical study in which a sample of 187 personnel from a population of 363 personnel, working in medical records departments of hospitals affiliated to Tehran University of Medical Sciences, was selected. Users' perception of applying information technology was studied by a researcher-developed questionnaire. Collected data were analyzed by SPSS software (version16) using descriptive statistics and regression analysis. The results suggest that TAM is a useful construct to assess user acceptance of information technology in the context of HIM. The findings also evidenced the perceived ease of use (PEOU) and perceived usefulness (PE) were positively associated with favorable users' attitudes towards HIM. PU was relatively more associated (r= 0.22, p = 0.05) than PEOU (r = 0.014, p = 0.05) with favorable user attitudes towards HIM. Users' perception of usefulness and ease of use are important determinants providing the incentive for users to accept information technologies when the application of a successful HIM system is attempted. The findings of the present study suggest that user acceptance is a key element and should subsequently be the major concern of health organizations and health policy makers.

An avionics scenario and command model description for Space Generic Open Avionics Architecture (SGOAA)

NASA Technical Reports Server (NTRS)

Stovall, John R.; Wray, Richard B.

1994-01-01

This paper presents a description of a model for a space vehicle operational scenario and the commands for avionics. This model will be used in developing a dynamic architecture simulation model using the Statemate CASE tool for validation of the Space Generic Open Avionics Architecture (SGOAA). The SGOAA has been proposed as an avionics architecture standard to NASA through its Strategic Avionics Technology Working Group (SATWG) and has been accepted by the Society of Automotive Engineers (SAE) for conversion into an SAE Avionics Standard. This architecture was developed for the Flight Data Systems Division (FDSD) of the NASA Johnson Space Center (JSC) by the Lockheed Engineering and Sciences Company (LESC), Houston, Texas. This SGOAA includes a generic system architecture for the entities in spacecraft avionics, a generic processing external and internal hardware architecture, and a nine class model of interfaces. The SGOAA is both scalable and recursive and can be applied to any hierarchical level of hardware/software processing systems.

HLM in Cluster-Randomised Trials--Measuring Efficacy across Diverse Populations of Learners

ERIC Educational Resources Information Center

Hegedus, Stephen; Tapper, John; Dalton, Sara; Sloane, Finbarr

2013-01-01

We describe the application of Hierarchical Linear Modelling (HLM) in a cluster-randomised study to examine learning algebraic concepts and procedures in an innovative, technology-rich environment in the US. HLM is applied to measure the impact of such treatment on learning and on contextual variables. We provide a detailed description of such…

A Study of ICT Infrastructure and Access to Educational Information in the Outskirts of Malang

ERIC Educational Resources Information Center

Elmunsyah, Hakkun

2012-01-01

This study aimed to determine the readiness of disadvantaged areas in support of Electronic School Books (BSE), which could be downloaded free of charge by making use of Information Communication Technology (ICT). The present study was descriptive research which was approached quantitatively, and expected to expand the model of development of…

Description of a Practitioner Model for Identifying Preferred Stimuli with Individuals with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Karsten, Amanda M.; Carr, James E.; Lepper, Tracy L.

2011-01-01

The rich technology of stimulus preference assessment (SPA) is a product of 40 years of experimental research. Basic principles of reinforcement and a modest empirical literature suggest that high-preference stimuli identified via SPA may enhance treatment efficacy and decrease problem behavior more effectively than less-preferred stimuli. SPAs…

Research and Technology

NASA Technical Reports Server (NTRS)

1990-01-01

Johnson Space Center (JSC) accomplishments in new and advanced concepts during 1989 are highlighted. This year, reports are grouped in sections, Medical Science, Solar System Sciences, Space Transportation Technology, and Space Systems Technology. Summary sections describing the role of JSC in each program are followed by descriptions of significant tasks. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Modeling microbial communities: current, developing, and future technologies for predicting microbial community interaction.

PubMed

Larsen, Peter; Hamada, Yuki; Gilbert, Jack

2012-07-31

Never has there been a greater opportunity for investigating microbial communities. Not only are the profound effects of microbial ecology on every aspect of Earth's geochemical cycles beginning to be understood, but also the analytical and computational tools for investigating microbial Earth are undergoing a rapid revolution. This environmental microbial interactome, the system of interactions between the microbiome and the environment, has shaped the planet's past and will undoubtedly continue to do so in the future. We review recent approaches for modeling microbial community structures and the interactions of microbial populations with their environments. Different modeling approaches consider the environmental microbial interactome from different aspects, and each provides insights to different facets of microbial ecology. We discuss the challenges and opportunities for the future of microbial modeling and describe recent advances in microbial community modeling that are extending current descriptive technologies into a predictive science. Copyright © 2012 Elsevier B.V. All rights reserved.

Aerospace Resources for Science and Technology Education.

ERIC Educational Resources Information Center

Maley, Donald, Ed.; Smith, Kenneth L., Ed.

This publication on Aerospace Programs is a special edition of "Technology Education" featuring descriptions of 15 select aerospace education programs from diverse localities spanning the full range of instructional levels. Following introductory material, the monograph contains the following largely unedited program descriptions: (1)…

Common Data Model for Neuroscience Data and Data Model Exchange

PubMed Central

Gardner, Daniel; Knuth, Kevin H.; Abato, Michael; Erde, Steven M.; White, Thomas; DeBellis, Robert; Gardner, Esther P.

2001-01-01

Objective: Generalizing the data models underlying two prototype neurophysiology databases, the authors describe and propose the Common Data Model (CDM) as a framework for federating a broad spectrum of disparate neuroscience information resources. Design: Each component of the CDM derives from one of five superclasses—data, site, method, model, and reference—or from relations defined between them. A hierarchic attribute-value scheme for metadata enables interoperability with variable tree depth to serve specific intra- or broad inter-domain queries. To mediate data exchange between disparate systems, the authors propose a set of XML-derived schema for describing not only data sets but data models. These include biophysical description markup language (BDML), which mediates interoperability between data resources by providing a meta-description for the CDM. Results: The set of superclasses potentially spans data needs of contemporary neuroscience. Data elements abstracted from neurophysiology time series and histogram data represent data sets that differ in dimension and concordance. Site elements transcend neurons to describe subcellular compartments, circuits, regions, or slices; non-neuroanatomic sites include sequences to patients. Methods and models are highly domain-dependent. Conclusions: True federation of data resources requires explicit public description, in a metalanguage, of the contents, query methods, data formats, and data models of each data resource. Any data model that can be derived from the defined superclasses is potentially conformant and interoperability can be enabled by recognition of BDML-described compatibilities. Such metadescriptions can buffer technologic changes. PMID:11141510

Review of Development Survey of Phase Change Material Models in Building Applications

PubMed Central

Akeiber, Hussein J.; Wahid, Mazlan A.; Hussen, Hasanen M.; Mohammad, Abdulrahman Th.

2014-01-01

The application of phase change materials (PCMs) in green buildings has been increasing rapidly. PCM applications in green buildings include several development models. This paper briefly surveys the recent research and development activities of PCM technology in building applications. Firstly, a basic description of phase change and their principles is provided; the classification and applications of PCMs are also included. Secondly, PCM models in buildings are reviewed and discussed according to the wall, roof, floor, and cooling systems. Finally, conclusions are presented based on the collected data. PMID:25313367

Active vibration control activities at the LaRC - Present and future

NASA Technical Reports Server (NTRS)

Newsom, J. R.

1990-01-01

The NASA Controls-Structures-Interaction (CSI) program is presented with a description of the ground testing element objectives and approach. The goal of the CSI program is to develop and validate the technology required to design, verify and operate space systems in which the structure and the controls interact beneficially to meet the needs of future NASA missions. The operational Mini-Mast ground testbed and some sample active vibration control experimental results are discussed along with a description of the CSI Evolutionary Model testbed presently under development. Initial results indicate that embedded sensors and actuators are effective in controlling a large truss/reflector structure.

System description for DART (Decision Analysis for Remediation Technologies)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nonte, J.; Bolander, T.; Nickelson, D.

1997-09-01

DART is a computer aided system populated with influence models to determine quantitative benefits derived by matching requirements and technologies. The DART database is populated with data from over 900 DOE sites from 10 Field Offices. These sites are either source terms, such as buried waste pits, or soil or groundwater contaminated plumes. The data, traceable to published documents, consists of site-specific data (contaminants, area, volume, depth, size, remedial action dates, site preferred remedial option), problems (e.g., offsite contaminant plume), and Site Technology Coordinating Group (STCG) need statements (also contained in the Ten-Year Plan). DART uses this data to calculatemore » and derive site priorities, risk rankings, and site specific technology requirements. DART is also populated with over 900 industry and DOE SCFA technologies. Technology capabilities can be used to match technologies to waste sites based on the technology`s capability to meet site requirements and constraints. Queries may be used to access, sort, roll-up, and rank site data. Data roll-ups may be graphically displayed.« less

Hispanic Older Adult’s Perceptions of Personal, Contextual and Technology-Related Barriers for Using Assistive Technology Devices

PubMed Central

Orellano-Colón, Elsa M.; Mann, William C.; Rivero, Marta; Torres, Mayra; Jutai, Jeff; Santiago, Angélica; Varas, Nelson

2016-01-01

Assistive technologies (AT) are tools that enhance the independence, safety, and quality of life of older people with functional limitations. While AT may extend independence in ageing, there are racial and ethnic disparities in late-life AT use, with lower rates reported among Hispanic older populations. The aim of this study was to identify barriers experienced by Hispanic community-living older adults for using AT. Sixty Hispanic older adults (70 years and older) with functional limitations participated in this study. A descriptive qualitative research design was used guided by the principles of the Human Activity Assistive Technology Model to gain in-depth understanding of participants’ perspectives regarding barriers to using AT devices. Individual in-depth semi-structure interviews were conducted, using the Assistive Technology Devices Cards (ATDC) assessment as a prompt to facilitate participants’ qualitative responses. Data analysis included descriptive statistics and rigorous thematic content analysis. Lack of AT awareness and information, cost of AT, limited coverage of AT by heath care plans, and perceived complexity of AT were the predominant barriers experienced by the participants. A multi-level approach is required for a better understanding of the barriers for using AT devices. The personal, contextual, and activity-based barriers found in this study can be used to develop culturally sensitive AT interventions to reduce existent disparities in independent living disabilities among older Hispanics. PMID:27294762

Estimation of M 1 scissors mode strength for deformed nuclei in the medium- to heavy-mass region by statistical Hauser-Feshbach model calculations

NASA Astrophysics Data System (ADS)

Mumpower, M. R.; Kawano, T.; Ullmann, J. L.; Krtička, M.; Sprouse, T. M.

2017-08-01

Radiative neutron capture is an important nuclear reaction whose accurate description is needed for many applications ranging from nuclear technology to nuclear astrophysics. The description of such a process relies on the Hauser-Feshbach theory which requires the nuclear optical potential, level density, and γ -strength function as model inputs. It has recently been suggested that the M 1 scissors mode may explain discrepancies between theoretical calculations and evaluated data. We explore statistical model calculations with the strength of the M 1 scissors mode estimated to be dependent on the nuclear deformation of the compound system. We show that the form of the M 1 scissors mode improves the theoretical description of evaluated data and the match to experiment in both the fission product and actinide regions. Since the scissors mode occurs in the range of a few keV to a few MeV, it may also impact the neutron capture cross sections of neutron-rich nuclei that participate in the rapid neutron capture process of nucleosynthesis. We comment on the possible impact to nucleosynthesis by evaluating neutron capture rates for neutron-rich nuclei with the M 1 scissors mode active.

Using technology to enhance the quality of home health care: three case studies of health information technology initiatives at the visiting nurse service of New York.

PubMed

Russell, David; Rosenfeld, Peri; Ames, Sylvia; Rosati, Robert J

2010-01-01

There is a growing recognition among health services researchers and policy makers that Health Information Technology (HIT) has the potential to address challenging issues that face patients and providers of healthcare. The Visiting Nurse Service of New York (VNSNY), a large not-for-profit home healthcare agency, has integrated technology applications into the service delivery model of several programs. Case studies, including the development and implementation, of three informatics initiatives at VNSNY are presented on: (1) Quality Scorecards that utilize process, outcomes, cost, and satisfaction measures to assess performance among clinical staff and programs; (2) a tool to identify patients at risk of being hospitalized, and (3) a predictive model that identifies patients who are eligible for physical rehabilitation services. Following a description of these initiatives, we discuss their impact on quality and process indicators, as well as the opportunities and challenges to implementation. © 2010 National Association for Healthcare Quality.

ENABLING SMART MANUFACTURING TECHNOLOGIES FOR DECISION-MAKING SUPPORT

PubMed Central

Helu, Moneer; Libes, Don; Lubell, Joshua; Lyons, Kevin; Morris, KC

2017-01-01

Smart manufacturing combines advanced manufacturing capabilities and digital technologies throughout the product lifecycle. These technologies can provide decision-making support to manufacturers through improved monitoring, analysis, modeling, and simulation that generate more and better intelligence about manufacturing systems. However, challenges and barriers have impeded the adoption of smart manufacturing technologies. To begin to address this need, this paper defines requirements for data-driven decision making in manufacturing based on a generalized description of decision making. Using these requirements, we then focus on identifying key barriers that prevent the development and use of data-driven decision making in industry as well as examples of technologies and standards that have the potential to overcome these barriers. The goal of this research is to promote a common understanding among the manufacturing community that can enable standardization efforts and innovation needed to continue adoption and use of smart manufacturing technologies. PMID:28649678

Annual Review of Information Science and Technology. Volume Eight.

ERIC Educational Resources Information Center

Cuadra, Carlos A., Ed.; Luke, Ann W., Ed.

Descriptions and appraisals of significant recent trends and developments in the field of information science are presented. The eleven individual chapters deal, respectively, with the following topics: 1) the economics of information, 2) document description and representation, 3) automated language processing, 4) microform technology, 5) library…

48 CFR 7.103 - Agency-head responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracting, reviews: (1) The acquisition history of the supplies and services; and (2) A description of the... product descriptions that address Electronic and Information Technology Accessibility Standards (see 36... contractors (see 7.107) (15 U.S.C. 631(j)). (t) Ensuring that agency planners on information technology...

Pedagogical Factors Affecting Integration of Computers in Mathematics Instruction in Secondary Schools in Kenya

ERIC Educational Resources Information Center

Wanjala, Martin M. S.; Aurah, Catherine M.; Symon, Koros C.

2015-01-01

The paper reports findings of a study which sought to examine the pedagogical factors that affect the integration of computers in mathematics instruction as perceived by teachers in secondary schools in Kenya. This study was based on the Technology Acceptance Model (TAM). A descriptive survey design was used for this study. Stratified and simple…

An Exploratory Analysis of the Navy Personnel Support Delivery Model

DTIC Science & Technology

2017-09-01

technology-competent generation. Our efforts are focused on providing a quantitative effort to understanding past trends in Personnel Support Detachment (PSD... quantitative effort to understanding past trends in Personnel Support Detachment (PSD) and Customer Service Desk (CSD) transactions that may aid manpower...56 xiv THIS PAGE INTENTIONALLY LEFT BLANK xv LIST OF TABLES Table 1. Final Dataset Column Names and Descriptions

Information Integration for Concurrent Engineering (IICE) IDEF3 Process Description Capture Method Report

DTIC Science & Technology

1995-09-01

vital processes of a business. process, IDEF, method, methodology, modeling, knowledge acquisition, requirements definition, information systems... knowledge resources. Like manpower, materials, and machines, information and knowledge assets are recognized as vital resources that can be leveraged to...integrated enterprise. These technologies are designed to leverage information and knowledge resources as the key enablers for high quality systems

Evaluating a Service-Oriented Architecture

DTIC Science & Technology

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

The Conceptual Model of Future Teachers Training to Dual Education in VET (Vocational Education & Training)

ERIC Educational Resources Information Center

Zholdasbekova, Saule; Nurzhanbayeva, Zhanat; Karatayev, Galymzhan; Akhmet, Laura Smatullaevna; Anarmetov, Bahitzhan

2016-01-01

In the article the author presents the theoretical understanding of research problems of training of the future teachers-organizers of the dual training system in vocational education & training (VET) in the conditions of the credit technology of education. The author's vision of way to solve the problem is discussed in the description of the…

The Human Performance Technology Model as a Framework for Implementation of Social Media in Hospitals

ERIC Educational Resources Information Center

Szyszlo, Ann M.

2014-01-01

Social media are ubiquitous and used by millions of people every day. Existing research on social media is primarily descriptive, survey based, and focused on who is using social media and how people and organizations are using the tools. Although many organizations have shown interest in using social media, they often demonstrate uncertainty…

Development of a telemedicine model for emerging countries: a case study on pediatric oncology in Brazil.

PubMed

Hira, A Y; Nebel de Mello, A; Faria, R A; Odone Filho, V; Lopes, R D; Zuffo, M K

2006-01-01

This article discusses a telemedicine model for emerging countries, through the description of ONCONET, a telemedicine initiative applied to pediatric oncology in Brazil. The ONCONET core technology is a Web-based system that offers health information and other services specialized in childhood cancer such as electronic medical records and cooperative protocols for complex treatments. All Web-based services are supported by the use of high performance computing infrastructure based on clusters of commodity computers. The system was fully implemented on an open-source and free-software approach. Aspects of modeling, implementation and integration are covered. A model, both technologically and economically viable, was created through the research and development of in-house solutions adapted to the emerging countries reality and with focus on scalability both in the total number of patients and in the national infrastructure.

A new bio-inspired, population-level approach to the socioeconomic evolution of dynamic spectrum access services

NASA Astrophysics Data System (ADS)

Horvath, Denis; Gazda, Juraj; Brutovsky, Branislav

Evolutionary species and quasispecies models provide the universal and flexible basis for a large-scale description of the dynamics of evolutionary systems, which can be built conceived as a constraint satisfaction dynamics. It represents a general framework to design and study many novel, technologically contemporary models and their variants. Here, we apply the classical quasispecies concept to model the emerging dynamic spectrum access (DSA) markets. The theory describes the mechanisms of mimetic transfer, competitive interactions between socioeconomic strata of the end-users, their perception of the utility and inter-operator switching in the variable technological environments of the operators offering the wireless spectrum services. The algorithmization and numerical modeling demonstrate the long-term evolutionary socioeconomic changes which reflect the end-user preferences and results of the majorization of their irrational decisions in the same manner as the prevailing tendencies which are embodied in the efficient market hypothesis.

Thick Descriptions: A Language for Articulating Ethnographic Media Technology.

ERIC Educational Resources Information Center

Goldman-Segall, Ricki

"Thick descriptions" are descriptions that are layered enough to draw conclusions and uncover the intentions of a given act, event, or process. In a video environment, thick descriptions are images, gestures, or sequences that convey meaning. Neither the quantity nor the resolution of the images makes the descriptions thick. Thickness is…

A fate model for nitrogen dynamics in the Scheldt basin

NASA Astrophysics Data System (ADS)

Haest, Pieter Jan; van der Kwast, Johannes; Broekx, Steven; Seuntjens, Piet

2010-05-01

The European Union (EU) adopted the Water Framework Directive (WFD) in 2000 ensuring that all aquatic ecosystems meet ‘good ecological status' by 2015. However, the large population density in combination with agricultural and industrial activities in some European river basins pose challenges for river basin managers in meeting this status. The EU financed AQUAREHAB project (FP7) specifically examines the ecological and economic impact of innovative rehabilitation technologies for multi-pressured degraded waters. For this purpose, a numerical spatio-temporal model is developed to evaluate innovative technologies versus conventional measures at the river basin scale. The numerical model describes the nitrogen dynamics in the Scheldt river basin. Nitrogen is examined since nitrate is of specific concern in Belgium, the country comprising the largest area of the Scheldt basin. The Scheldt basin encompasses 20000 km2 and houses over 10 million people. The governing factors describing nitrogen fluxes at this large scale differ from the field scale with a larger uncertainty on input data. As such, the environmental modeling language PCRaster was selected since it was found to provide a balance between process descriptions and necessary input data. The resulting GIS-based model simulates the nitrogen dynamics in the Scheldt basin with a yearly time step and a spatial resolution of 1 square kilometer. A smaller time step is being evaluated depending on the description of the hydrology. The model discerns 4 compartments in the Scheldt basin: the soil, shallow groundwater, deep groundwater and the river network. Runoff and water flow occurs along the steepest slope in all model compartments. Diffuse emissions and direct inputs are calculated from administrative and statistical data. These emissions are geographically defined or are distributed over the domain according to land use and connectivity to the sewer system. The reactive mass transport is described using literature data. Process-knowledge on the innovative rehabilitation technologies, i.e. wetlands and riparian zones, will be derived from lab and field scale experiments. Datasets provided at the EU level are used to calibrate the model when available. The fate model will be used to create a database driven Decision Support System (DSS) in which costs of measures and ecotoxicological effects are considered. The DSS can then be used to compare alternative combinations of rehabilitation technologies versus conventional measures in the Scheldt river basin taking into account the ecological status of the river basin.

Research and technology of the Lyndon Johnson Space Center

NASA Technical Reports Server (NTRS)

1989-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1988 are highlighted. This year, reports are grouped in sections Space System Technology, Solar System Sciences, Space Transportation Technology, and Medical Sciences. Summary sections describing the role of Johnson Space Center in each program are followed by descriptions of significant tasks. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Numeric promoter description - A comparative view on concepts and general application.

PubMed

Beier, Rico; Labudde, Dirk

2016-01-01

Nucleic acid molecules play a key role in a variety of biological processes. Starting from storage and transfer tasks, this also comprises the triggering of biological processes, regulatory effects and the active influence gained by target binding. Based on the experimental output (in this case promoter sequences), further in silico analyses aid in gaining new insights into these processes and interactions. The numerical description of nucleic acids thereby constitutes a bridge between the concrete biological issues and the analytical methods. Hence, this study compares 26 descriptor sets obtained by applying well-known numerical description concepts to an established dataset of 38 DNA promoter sequences. The suitability of the description sets was evaluated by computing partial least squares regression models and assessing the model accuracy. We conclude that the major importance regarding the descriptive power is attached to positional information rather than to explicitly incorporated physico-chemical information, since a sufficient amount of implicit physico-chemical information is already encoded in the nucleobase classification. The regression models especially benefited from employing the information that is encoded in the sequential and structural neighborhood of the nucleobases. Thus, the analyses of n-grams (short fragments of length n) suggested that they are valuable descriptors for DNA target interactions. A mixed n-gram descriptor set thereby yielded the best description of the promoter sequences. The corresponding regression model was checked and found to be plausible as it was able to reproduce the characteristic binding motifs of promoter sequences in a reasonable degree. As most functional nucleic acids are based on the principle of molecular recognition, the findings are not restricted to promoter sequences, but can rather be transferred to other kinds of functional nucleic acids. Thus, the concepts presented in this study could provide advantages for future nucleic acid-based technologies, like biosensoring, therapeutics and molecular imaging. Copyright © 2015 Elsevier Inc. All rights reserved.

SaaS Platform for Time Series Data Handling

NASA Astrophysics Data System (ADS)

Oplachko, Ekaterina; Rykunov, Stanislav; Ustinin, Mikhail

2018-02-01

The paper is devoted to the description of MathBrain, a cloud-based resource, which works as a "Software as a Service" model. It is designed to maximize the efficiency of the current technology and to provide a tool for time series data handling. The resource provides access to the following analysis methods: direct and inverse Fourier transforms, Principal component analysis and Independent component analysis decompositions, quantitative analysis, magnetoencephalography inverse problem solution in a single dipole model based on multichannel spectral data.

A novel binary shape context for 3D local surface description

NASA Astrophysics Data System (ADS)

Dong, Zhen; Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Li, Bijun; Zang, Yufu

2017-08-01

3D local surface description is now at the core of many computer vision technologies, such as 3D object recognition, intelligent driving, and 3D model reconstruction. However, most of the existing 3D feature descriptors still suffer from low descriptiveness, weak robustness, and inefficiency in both time and memory. To overcome these challenges, this paper presents a robust and descriptive 3D Binary Shape Context (BSC) descriptor with high efficiency in both time and memory. First, a novel BSC descriptor is generated for 3D local surface description, and the performance of the BSC descriptor under different settings of its parameters is analyzed. Next, the descriptiveness, robustness, and efficiency in both time and memory of the BSC descriptor are evaluated and compared to those of several state-of-the-art 3D feature descriptors. Finally, the performance of the BSC descriptor for 3D object recognition is also evaluated on a number of popular benchmark datasets, and an urban-scene dataset is collected by a terrestrial laser scanner system. Comprehensive experiments demonstrate that the proposed BSC descriptor obtained high descriptiveness, strong robustness, and high efficiency in both time and memory and achieved high recognition rates of 94.8%, 94.1% and 82.1% on the considered UWA, Queen, and WHU datasets, respectively.

Experimental and theoretical assessment of the multi-domain flow behaviour in a waste body during leachate infiltration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tinet, A-J., E-mail: tinet@ujf-grenoble.fr; Oxarango, L.; Centre for Research in Environmental, Coastal and Hydrological Engineering, School of Civil Engineering, Surveying and Construction, University of KwaZulu-Natal, Howard College Campus, Durban 4041

2011-08-15

The optimisation of landfill operation is a key challenge for the upcoming years. A promising solution to improve municipal solid waste (MSW) management is the bioreactor technology. A meso-scale (around 1 m{sup 3}) experimental set-up was performed to study the effect of moisture control in low density conditions with different leachate injection operations and bioreactor monitoring including the use of a neutron probe. The moisture content distribution evolution demonstrates a multi-domain flow behaviour. A classic van Genuchten-Mualem description of the connected porosity proved insufficient to correctly describe the observed phenomena. A bimodal description of the connected porosity is proposed asmore » solution and a connected/non-connected porosities numerical model was applied to the results. The model explains the experimental results reasonably well.« less

DETERMINATION OF THE STRONG ACIDITY OF ATMOSPHERIC FINE PARTICLES (<2.5 UM) USING ANNULAR DENUDER TECHNOLOGY

EPA Science Inventory

This report is a standardized methodology description for the determination of strong acidity of fine particles (less than 2.5 microns) in ambient air using annular denuder technology. his methodology description includes two parts: art A - Standard Method and Part B - Enhanced M...

Cost-Effective and High-Resolution Subsurface Characterization Using Hydraulic Tomography

DTIC Science & Technology

2017-08-28

implementation and compare costs associated with HT and conventional methods. TECHNOLOGY DESCRIPTION The HT concept is analogous to the Computerized...develop guidance for HT field implementation and compare costs associated with HT and conventional methods. 15. SUBJECT TERMS Subsurface...3  2.1  TECHNOLOGY DESCRIPTION

Curriculum Development and Alignment in Radiologic Technology.

ERIC Educational Resources Information Center

Dowd, Steven B.

Before developing a curriculum for radiologic technology, one must first attempt to define the term "curriculum." The term is not easy to define precisely, although it does imply the necessity of a master plan that outlines institutional philosophy and goals, course descriptions, description of competency-based evaluation, performance objectives,…

Service-oriented model-encapsulation strategy for sharing and integrating heterogeneous geo-analysis models in an open web environment

NASA Astrophysics Data System (ADS)

Yue, Songshan; Chen, Min; Wen, Yongning; Lu, Guonian

2016-04-01

Earth environment is extremely complicated and constantly changing; thus, it is widely accepted that the use of a single geo-analysis model cannot accurately represent all details when solving complex geo-problems. Over several years of research, numerous geo-analysis models have been developed. However, a collaborative barrier between model providers and model users still exists. The development of cloud computing has provided a new and promising approach for sharing and integrating geo-analysis models across an open web environment. To share and integrate these heterogeneous models, encapsulation studies should be conducted that are aimed at shielding original execution differences to create services which can be reused in the web environment. Although some model service standards (such as Web Processing Service (WPS) and Geo Processing Workflow (GPW)) have been designed and developed to help researchers construct model services, various problems regarding model encapsulation remain. (1) The descriptions of geo-analysis models are complicated and typically require rich-text descriptions and case-study illustrations, which are difficult to fully represent within a single web request (such as the GetCapabilities and DescribeProcess operations in the WPS standard). (2) Although Web Service technologies can be used to publish model services, model users who want to use a geo-analysis model and copy the model service into another computer still encounter problems (e.g., they cannot access the model deployment dependencies information). This study presents a strategy for encapsulating geo-analysis models to reduce problems encountered when sharing models between model providers and model users and supports the tasks with different web service standards (e.g., the WPS standard). A description method for heterogeneous geo-analysis models is studied. Based on the model description information, the methods for encapsulating the model-execution program to model services and for describing model-service deployment information are also included in the proposed strategy. Hence, the model-description interface, model-execution interface and model-deployment interface are studied to help model providers and model users more easily share, reuse and integrate geo-analysis models in an open web environment. Finally, a prototype system is established, and the WPS standard is employed as an example to verify the capability and practicability of the model-encapsulation strategy. The results show that it is more convenient for modellers to share and integrate heterogeneous geo-analysis models in cloud computing platforms.

Using GTO-Velo to Facilitate Communication and Sharing of Simulation Results in Support of the Geothermal Technologies Office Code Comparison Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, Signe K.; Purohit, Sumit; Boyd, Lauren W.

The Geothermal Technologies Office Code Comparison Study (GTO-CCS) aims to support the DOE Geothermal Technologies Office in organizing and executing a model comparison activity. This project is directed at testing, diagnosing differences, and demonstrating modeling capabilities of a worldwide collection of numerical simulators for evaluating geothermal technologies. Teams of researchers are collaborating in this code comparison effort, and it is important to be able to share results in a forum where technical discussions can easily take place without requiring teams to travel to a common location. Pacific Northwest National Laboratory has developed an open-source, flexible framework called Velo that providesmore » a knowledge management infrastructure and tools to support modeling and simulation for a variety of types of projects in a number of scientific domains. GTO-Velo is a customized version of the Velo Framework that is being used as the collaborative tool in support of the GTO-CCS project. Velo is designed around a novel integration of a collaborative Web-based environment and a scalable enterprise Content Management System (CMS). The underlying framework provides a flexible and unstructured data storage system that allows for easy upload of files that can be in any format. Data files are organized in hierarchical folders and each folder and each file has a corresponding wiki page for metadata. The user interacts with Velo through a web browser based wiki technology, providing the benefit of familiarity and ease of use. High-level folders have been defined in GTO-Velo for the benchmark problem descriptions, descriptions of simulator/code capabilities, a project notebook, and folders for participating teams. Each team has a subfolder with write access limited only to the team members, where they can upload their simulation results. The GTO-CCS participants are charged with defining the benchmark problems for the study, and as each GTO-CCS Benchmark problem is defined, the problem creator can provide a description using a template on the metadata page corresponding to the benchmark problem folder. Project documents, references and videos of the weekly online meetings are shared via GTO-Velo. A results comparison tool allows users to plot their uploaded simulation results on the fly, along with those of other teams, to facilitate weekly discussions of the benchmark problem results being generated by the teams. GTO-Velo is an invaluable tool providing the project coordinators and team members with a framework for collaboration among geographically dispersed organizations.« less

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2011 CFR

2011-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2010 CFR

2010-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

In-Space Chemical Propulsion System Model

NASA Technical Reports Server (NTRS)

Byers, David C.; Woodcock, Gordon; Benfield, Michael P. J.

2004-01-01

Multiple, new technologies for chemical systems are becoming available and include high temperature rockets, very light propellant tanks and structures, new bipropellant and monopropellant options, lower mass propellant control components, and zero boil off subsystems. Such technologies offer promise of increasing the performance of in-space chemical propulsion for energetic space missions. A mass model for pressure-fed, Earth and space-storable, advanced chemical propulsion systems (ACPS) was developed in support of the NASA MSFC In-Space Propulsion Program. Data from flight systems and studies defined baseline system architectures and subsystems and analyses were formulated for parametric scaling relationships for all ACPS subsystem. The paper will first provide summary descriptions of the approaches used for the systems and the subsystems and then present selected analyses to illustrate use of the model for missions with characteristics of current interest.

In-Space Chemical Propulsion System Model

NASA Technical Reports Server (NTRS)

Byers, David C.; Woodcock, Gordon; Benfield, M. P. J.

2004-01-01

Multiple, new technologies for chemical systems are becoming available and include high temperature rockets, very light propellant tanks and structures, new bipropellant and monopropellant options, lower mass propellant control components, and zero boil off subsystems. Such technologies offer promise of increasing the performance of in-space chemical propulsion for energetic space missions. A mass model for pressure-fed, Earth and space-storable, advanced chemical propulsion systems (ACPS) was developed in support of the NASA MSFC In-Space Propulsion Program. Data from flight systems and studies defined baseline system architectures and subsystems and analyses were formulated for parametric scaling relationships for all ACPS subsystems. The paper will first provide summary descriptions of the approaches used for the systems and the subsystems and then present selected analyses to illustrate use of the model for missions with characteristics of current interest.

Review of early assessment models of innovative medical technologies.

PubMed

Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

2017-08-01

Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Towards a Semantically-Enabled Control Strategy for Building Simulations: Integration of Semantic Technologies and Model Predictive Control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delgoshaei, Parastoo; Austin, Mark A.; Pertzborn, Amanda J.

State-of-the-art building simulation control methods incorporate physical constraints into their mathematical models, but omit implicit constraints associated with policies of operation and dependency relationships among rules representing those constraints. To overcome these shortcomings, there is a recent trend in enabling the control strategies with inference-based rule checking capabilities. One solution is to exploit semantic web technologies in building simulation control. Such approaches provide the tools for semantic modeling of domains, and the ability to deduce new information based on the models through use of Description Logic (DL). In a step toward enabling this capability, this paper presents a cross-disciplinary data-drivenmore » control strategy for building energy management simulation that integrates semantic modeling and formal rule checking mechanisms into a Model Predictive Control (MPC) formulation. The results show that MPC provides superior levels of performance when initial conditions and inputs are derived from inference-based rules.« less

Images as drivers of progress in cardiac computational modelling

PubMed Central

Lamata, Pablo; Casero, Ramón; Carapella, Valentina; Niederer, Steve A.; Bishop, Martin J.; Schneider, Jürgen E.; Kohl, Peter; Grau, Vicente

2014-01-01

Computational models have become a fundamental tool in cardiac research. Models are evolving to cover multiple scales and physical mechanisms. They are moving towards mechanistic descriptions of personalised structure and function, including effects of natural variability. These developments are underpinned to a large extent by advances in imaging technologies. This article reviews how novel imaging technologies, or the innovative use and extension of established ones, integrate with computational models and drive novel insights into cardiac biophysics. In terms of structural characterization, we discuss how imaging is allowing a wide range of scales to be considered, from cellular levels to whole organs. We analyse how the evolution from structural to functional imaging is opening new avenues for computational models, and in this respect we review methods for measurement of electrical activity, mechanics and flow. Finally, we consider ways in which combined imaging and modelling research is likely to continue advancing cardiac research, and identify some of the main challenges that remain to be solved. PMID:25117497

The electronic-commerce-oriented virtual merchandise model

NASA Astrophysics Data System (ADS)

Fang, Xiaocui; Lu, Dongming

2004-03-01

Electronic commerce has been the trend of commerce activities. Providing with Virtual Reality interface, electronic commerce has better expressing capacity and interaction means. But most of the applications of virtual reality technology in EC, 3D model is only the appearance description of merchandises. There is almost no information concerned with commerce information and interaction information. This resulted in disjunction of virtual model and commerce information. So we present Electronic Commerce oriented Virtual Merchandise Model (ECVMM), which combined a model with commerce information, interaction information and figure information of virtual merchandise. ECVMM with abundant information provides better support to information obtainment and communication in electronic commerce.

Estimating the Effects of the Terminal Area Productivity Program

NASA Technical Reports Server (NTRS)

Lee, David A.; Kostiuk, Peter F.; Hemm, Robert V., Jr.; Wingrove, Earl R., III; Shapiro, Gerald

1997-01-01

The report describes methods and results of an analysis of the technical and economic benefits of the systems to be developed in the NASA Terminal Area Productivity (TAP) program. A runway capacity model using parameters that reflect the potential impact of the TAP technologies is described. The runway capacity model feeds airport specific models which are also described. The capacity estimates are used with a queuing model to calculate aircraft delays, and TAP benefits are determined by calculating the savings due to reduced delays. The report includes benefit estimates for Boston Logan and Detroit Wayne County airports. An appendix includes a description and listing of the runway capacity model.

Cryogenic Orbital Nitrogen Experiment (CONE): Phase A/B design study

NASA Technical Reports Server (NTRS)

Bailey, William J.; Weiner, Stephen P.; Beekman, Douglas H.

1991-01-01

Subcritical cryogenic fluid management (CFM) has long been recognized as an enabling technology for future space missions. Subcritical liquid storage and supply are two of the five CFM technology areas that need to be studied in the low gravity on-orbit environment. The Cryogenic Orbital Nitrogen Experiment (CONE) is a LN2 cryogenic storage and supply system demonstration placed in orbit by the National Space Transportation System (NSTS) Orbiter and operated as an in-bay payload. In-space demonstration of CFM using LN2 with a few well defined areas of focus would provide the confidence level required to implement subcritical cryogen use and is the first step towards the more far reaching issue of cryogen transfer and tankage resupply. A conceptual approach for CONE was developed and an overview of the program is described including the following: (1) a description of the background and scope of the technology objectives; (2) a description of the payload design and operation; and (3) the justification for CONE relating to potential near term benefits and risk mitigation for future systems. Data and criteria is provided to correlate in-space performance with analytical and numerical modeling of CFM systems.

Consumer concerns and expectations about novel food processing technologies: effects on product liking.

PubMed

Cardello, Armand V

2003-06-01

Eighty-eight consumers participated in a blind pre-test in which they rated their baseline preference for chocolate pudding, their liking of three tasted brands of chocolate pudding, and their level of concern for 20 different food processing and preservation technologies. All returned one month later and tasted the same puddings, but this time they were informed that they had been processed by one of several different novel or traditional food processing techniques. Different sub-groups were informed of the name of the process, the name plus a factual description of the process, or the name, the factual description, plus a benefit statement. Ratings of expected liking were obtained before and after viewing the samples, but before tasting them. Finally, subjects tasted and rated the products for actual liking and a sub-group rated their concern levels for the same 20 technologies rated in the pre-test. Pre-test results showed females to have significantly higher concern levels for all technologies. Individuals who had demonstrated a willingness to consume foods processed by one novel technology (irradiation) had lower concern ratings for all technologies. Ratings of concern were negatively correlated with expected liking for products believed to be processed by the technologies. Expected liking ratings were positively influenced by visual exposure to the product and by a safety and benefit statement. Linear regression of the change in product liking as a function of whether products were better or worse than expected supported an assimilation model of the effect of disconfirmed expectations on liking/disliking. Lastly, post-test concern levels for many of the technologies were reduced by participation in the study.

Technological Specialisation Courses in Portugal: Description and Suggested Improvements

ERIC Educational Resources Information Center

da Costa, Nilza Maria Vilhena Nunes; Simoes, Ana Raquel; Pereira, Giselia Antunes; Pombo, Lucia

2009-01-01

This study is a part of the "Post-secondary Vocational Training in Portugal Project: from a description through to suggestions to improve training quality", which ran from 2003 to 2006. This article, which makes use of data obtained from interviews with Directors of Schools which offer technological specialisation courses (CETs) and from…

Masters Curricula in Educational Communications and Technology: A Descriptive Directory. Third Edition.

ERIC Educational Resources Information Center

Johnson, Jenny K., Ed.

This directory of educational communications and technology masters programs contains descriptions of programs in both the United States and foreign countries. The U.S. listings are categorized by state. Data for each institution include an address and contact person; a listing of courses; information on prerequisites for entering the program;…

Solar Electric Propulsion System Integration Technology (SEPSIT). Volume 2: Encke rendezvous mission and space vehicle functional description

NASA Technical Reports Server (NTRS)

Gardner, J. A.

1972-01-01

A solar electric propulsion system integration technology study is discussed. Detailed analyses in support of the solar electric propulsion module were performed. The thrust subsystem functional description is presented. The space vehicle and the space mission to which the propulsion system is applied are analyzed.

Newsletter on Science, Technology & Human Values, Number 22.

ERIC Educational Resources Information Center

Shelanski, Vivien B., Ed.

This publication contains many news items such as meeting and conference descriptions and dates, proposed and current legislative action, publication descriptions, and topical articles. The items all pertain to the impact on humanity of science and technology. In this issue, news items include NSF, NEH, and AAAS meeting and seminar notices,…

Remediation of TNT and RDX in Groundwater Using Zero-Valent Iron Permeable Reactive Barriers

DTIC Science & Technology

2008-04-01

3 3.0 TECHNOLOGY DESCRIPTION ...................................................................................... 5 3.1... hydroxide NAVFAC-ESC Naval Facilities Engineering Service Center O&M operation and maintenance OHSU Oregon Health and Science University OD...remediation costs that may jeopardize major DoD programs and initiatives. 3 This page left blank intentionally. 3.0 TECHNOLOGY DESCRIPTION

Advanced-technology space station study: Summary of systems and pacing technologies

NASA Technical Reports Server (NTRS)

Butterfield, A. J.; Garn, P. A.; King, C. B.; Queijo, M. J.

1990-01-01

The principal system features defined for the Advanced Technology Space Station are summarized and the 21 pacing technologies identified during the course of the study are described. The descriptions of system configurations were extracted from four previous study reports. The technological areas focus on those systems particular to all large spacecraft which generate artificial gravity by rotation. The summary includes a listing of the functions, crew requirements and electrical power demand that led to the studied configuration. The pacing technologies include the benefits of advanced materials, in-orbit assembly requirements, stationkeeping, evaluations of electrical power generation alternates, and life support systems. The descriptions of systems show the potential for synergies and identifies the beneficial interactions that can result from technological advances.

Technology-Enhanced Blended Language Learning in an ESL Class: A Description of a Model and an Application of the Diffusion of Innovations Theory

ERIC Educational Resources Information Center

Grgurovic, Maja

2010-01-01

Blended learning, a combination of face-to-face and online instruction, is seen as one of the most important advancements of this century and a natural evolution of the learning agenda (Thorne, 2003). Blended learning studies that compared traditional and blended foreign language classes showed no significant differences in learner outcomes and…

Application of solar energy to air conditioning systems

NASA Technical Reports Server (NTRS)

Nash, J. M.; Harstad, A. J.

1976-01-01

The results of a survey of solar energy system applications of air conditioning are summarized. Techniques discussed are both solar powered (absorption cycle and the heat engine/Rankine cycle) and solar related (heat pump). Brief descriptions of the physical implications of various air conditioning techniques, discussions of status, proposed technological improvements, methods of utilization and simulation models are presented, along with an extensive bibliography of related literature.

An Examination of the Techno-Pedagogical Education Competencies (TPACK) of Pre-Service Elementary School and Preschool Teachers

ERIC Educational Resources Information Center

Özdemir, Muhammet

2016-01-01

The purpose of this study is to determine the technological pedagogical content knowledge of pre-service elementary school and preschool teachers. The fundamental problem of the study consists of the investigation of teachers' TPACK by their year of study and fields. This is a descriptive study. It was conducted using the survey model because it…

Design and Analysis of Winglets for Military Aircraft. Phase 2

DTIC Science & Technology

1977-05-01

determine the effect of the AFFDI/Boeing winglets on the KC-135A’s aerodynamic performance and longitudinal and lateral-directional stability. A... Aerodynamic Synthesis and Flight Research, task 143101, Unified Flight Mechanics Technology, work unit 14310125, Design and Analysis of Winglets for...1 TI LOW-SPEED AERODYNAMIC ANALYSIS OF L ~AFFDLIBOEING WINGLET ON THE KC-135A ......................... 1 1 Description of Analytic Model

Teacher as the Instrument of Evaluation: A Descriptive Case Study of Connoisseurship and Educational Criticism's Role in Project-Based Learning, Technology Arts Classroom

ERIC Educational Resources Information Center

Castro, Edward Anthony

2010-01-01

Purpose: The study's purpose was to determine the degree to which connoisseurship and educational criticism exists in student work evaluation; to identify master teachers' methods utilizing verbal feedback; and to determine the degree that project-based learning (PBL) principles serve as a "model of practice" for selected PBL technology…

Contribution of the infrasound technology to characterize large scale atmospheric disturbances and impact on infrasound monitoring

NASA Astrophysics Data System (ADS)

Blanc, Elisabeth; Le Pichon, Alexis; Ceranna, Lars; Pilger, Christoph; Charlton Perez, Andrew; Smets, Pieter

2016-04-01

The International Monitoring System (IMS) developed for the verification of the Comprehensive nuclear-Test-Ban Treaty (CTBT) provides a unique global description of atmospheric disturbances generating infrasound such as extreme events (e.g. meteors, volcanoes, earthquakes, and severe weather) or human activity (e.g. explosions and supersonic airplanes). The analysis of the detected signals, recorded at global scales and over near 15 years at some stations, demonstrates that large-scale atmospheric disturbances strongly affect infrasound propagation. Their time scales vary from several tens of minutes to hours and days. Their effects are in average well resolved by the current model predictions; however, accurate spatial and temporal description is lacking in both weather and climate models. This study reviews recent results using the infrasound technology to characterize these large scale disturbances, including (i) wind fluctuations induced by gravity waves generating infrasound partial reflections and modifications of the infrasound waveguide, (ii) convection from thunderstorms and mountain waves generating gravity waves, (iii) stratospheric warming events which yield wind inversions in the stratosphere, (iv)planetary waves which control the global atmospheric circulation. Improved knowledge of these disturbances and assimilation in future models is an important objective of the ARISE (Atmospheric dynamics Research InfraStructure in Europe) project. This is essential in the context of the future verification of the CTBT as enhanced atmospheric models are necessary to assess the IMS network performance in higher resolution, reduce source location errors, and improve characterization methods.

Low-rank coal study: national needs for resource development. Volume 3. Technology evaluation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-11-01

Technologies applicable to the development and use of low-rank coals are analyzed in order to identify specific needs for research, development, and demonstration (RD and D). Major sections of the report address the following technologies: extraction; transportation; preparation, handling and storage; conventional combustion and environmental control technology; gasification; liquefaction; and pyrolysis. Each of these sections contains an introduction and summary of the key issues with regard to subbituminous coal and lignite; description of all relevant technology, both existing and under development; a description of related environmental control technology; an evaluation of the effects of low-rank coal properties on the technology;more » and summaries of current commercial status of the technology and/or current RD and D projects relevant to low-rank coals.« less

Using information communication technology in models of integrated community-based primary health care: learning from the iCOACH case studies.

PubMed

Steele Gray, Carolyn; Barnsley, Jan; Gagnon, Dominique; Belzile, Louise; Kenealy, Tim; Shaw, James; Sheridan, Nicolette; Wankah Nji, Paul; Wodchis, Walter P

2018-06-26

Information communication technology (ICT) is a critical enabler of integrated models of community-based primary health care; however, little is known about how existing technologies have been used to support new models of integrated care. To address this gap, we draw on data from an international study of integrated models, exploring how ICT is used to support activities of integrated care and the organizational and environmental barriers and enablers to its adoption. We take an embedded comparative multiple-case study approach using data from a study of implementation of nine models of integrated community-based primary health care, the Implementing Integrated Care for Older Adults with Complex Health Needs (iCOACH) study. Six cases from Canada, three each in Ontario and Quebec, and three in New Zealand, were studied. As part of the case studies, interviews were conducted with managers and front-line health care providers from February 2015 to March 2017. A qualitative descriptive approach was used to code data from 137 interviews and generate word tables to guide analysis. Despite different models and contexts, we found strikingly similar accounts of the types of activities supported through ICT systems in each of the cases. ICT systems were used most frequently to support activities like care coordination by inter-professional teams through information sharing. However, providers were limited in their ability to efficiently share patient data due to data access issues across organizational and professional boundaries and due to system functionality limitations, such as a lack of interoperability. Even in innovative models of care, managers and providers in our cases mainly use technology to enable traditional ways of working. Technology limitations prevent more innovative uses of technology that could support disruption necessary to improve care delivery. We argue the barriers to more innovative use of technology are linked to three factors: (1) information access barriers, (2) limited functionality of available technology, and (3) organizational and provider inertia.

Fabrication and characterization of resonant SOI micromechanical silicon sensors based on DRIE micromachining, freestanding release process and silicon direct bonding

NASA Astrophysics Data System (ADS)

Gigan, Olivier; Chen, Hua; Robert, Olivier; Renard, Stephane; Marty, Frederic

2002-11-01

This paper is dedicated to the fabrication and technological aspect of a silicon microresonator sensor. The entire project includes the fabrication processes, the system modelling/simulation, and the electronic interface. The mechanical model of such resonator is presented including description of frequency stability and Hysterises behaviour of the electrostatically driven resonator. Numeric model and FEM simulations are used to simulate the system dynamic behaviour. The complete fabrication process is based on standard microelectronics technology with specific MEMS technological steps. The key steps are described: micromachining on SOI by Deep Reactive Ion Etching (DRIE), specific release processes to prevent sticking (resist and HF-vapour release process) and collective vacuum encapsulation by Silicon Direct Bonding (SDB). The complete process has been validated and prototypes have been fabricated. The ASIC was designed to interface the sensor and to control the vibration amplitude. This electronic was simulated and designed to work up to 200°C and implemented in a standard 0.6μ CMOS technology. Characterizations of sensor prototypes are done both mechanically and electrostatically. These measurements showed good agreements with theory and FEM simulations.

Accelerating Cancer Systems Biology Research through Semantic Web Technology

PubMed Central

Wang, Zhihui; Sagotsky, Jonathan; Taylor, Thomas; Shironoshita, Patrick; Deisboeck, Thomas S.

2012-01-01

Cancer systems biology is an interdisciplinary, rapidly expanding research field in which collaborations are a critical means to advance the field. Yet the prevalent database technologies often isolate data rather than making it easily accessible. The Semantic Web has the potential to help facilitate web-based collaborative cancer research by presenting data in a manner that is self-descriptive, human and machine readable, and easily sharable. We have created a semantically linked online Digital Model Repository (DMR) for storing, managing, executing, annotating, and sharing computational cancer models. Within the DMR, distributed, multidisciplinary, and inter-organizational teams can collaborate on projects, without forfeiting intellectual property. This is achieved by the introduction of a new stakeholder to the collaboration workflow, the institutional licensing officer, part of the Technology Transfer Office. Furthermore, the DMR has achieved silver level compatibility with the National Cancer Institute’s caBIG®, so users can not only interact with the DMR through a web browser but also through a semantically annotated and secure web service. We also discuss the technology behind the DMR leveraging the Semantic Web, ontologies, and grid computing to provide secure inter-institutional collaboration on cancer modeling projects, online grid-based execution of shared models, and the collaboration workflow protecting researchers’ intellectual property. PMID:23188758

Accelerating cancer systems biology research through Semantic Web technology.

PubMed

Wang, Zhihui; Sagotsky, Jonathan; Taylor, Thomas; Shironoshita, Patrick; Deisboeck, Thomas S

2013-01-01

Cancer systems biology is an interdisciplinary, rapidly expanding research field in which collaborations are a critical means to advance the field. Yet the prevalent database technologies often isolate data rather than making it easily accessible. The Semantic Web has the potential to help facilitate web-based collaborative cancer research by presenting data in a manner that is self-descriptive, human and machine readable, and easily sharable. We have created a semantically linked online Digital Model Repository (DMR) for storing, managing, executing, annotating, and sharing computational cancer models. Within the DMR, distributed, multidisciplinary, and inter-organizational teams can collaborate on projects, without forfeiting intellectual property. This is achieved by the introduction of a new stakeholder to the collaboration workflow, the institutional licensing officer, part of the Technology Transfer Office. Furthermore, the DMR has achieved silver level compatibility with the National Cancer Institute's caBIG, so users can interact with the DMR not only through a web browser but also through a semantically annotated and secure web service. We also discuss the technology behind the DMR leveraging the Semantic Web, ontologies, and grid computing to provide secure inter-institutional collaboration on cancer modeling projects, online grid-based execution of shared models, and the collaboration workflow protecting researchers' intellectual property. Copyright © 2012 Wiley Periodicals, Inc.

Nonlocal systems of balance laws in several space dimensions with applications to laser technology

NASA Astrophysics Data System (ADS)

Colombo, Rinaldo M.; Marcellini, Francesca

2015-12-01

For a class of systems of nonlinear and nonlocal balance laws in several space dimensions, we prove the local in time existence of solutions and their continuous dependence on the initial datum. The choice of this class is motivated by a new model devoted to the description of a metal plate being cut by a laser beam. Using realistic parameters, solutions to this model obtained through numerical integrations meet qualitative properties of real cuts. Moreover, the class of equations considered comprises a model describing the dynamics of solid particles along a conveyor belt.

Prevention through Design Adoption Readiness Model (PtD ARM): An integrated conceptual model.

PubMed

Weidman, Justin; Dickerson, Deborah E; Koebel, Charles T

2015-01-01

Prevention through Design (PtD), eliminating hazards at the design-stage of tools and systems, is the optimal method of mitigating occupational health and safety risks. A recent National Institute of Safety and Health initiative has established a goal to increase adoption of PtD innovation in industry. The construction industry has traditionally lagged behind other sectors in the adoption of innovation, in general; and of safety and health prevention innovation, in particular. Therefore, as a first step toward improving adoption trends in this sector, a conceptual model was developed to describe the parameters and causal relationships that influence and predict construction stakeholder "adoption readiness" for PtD technology innovation. This model was built upon three well-established theoretical frameworks: the Health Belief Model, the Diffusion of Innovation Model, and the Technology Acceptance Model. Earp and Ennett's model development methodology was employed to build a depiction of the key constructs and directionality and magnitude of relationships among them. Key constructs were identified from the literature associated with the three theoretical frameworks, with special emphasis given to studies related to construction or OHS technology adoption. A conceptual model is presented. Recommendations for future research are described and include confirmatory structural equation modeling of model parameters and relationships, additional descriptive investigation of barriers to adoption in some trade sectors, and design and evaluation of an intervention strategy.

E-learning readiness from perspectives of medical students: A survey in Nigeria.

PubMed

Obi, I E; Charles-Okoli, A N; Agunwa, C C; Omotowo, B I; Ndu, A C; Agwu-Umahi, O R

2018-03-01

Learning in the medical school of the study university is still by the traditional face-to-face approach with minimal e-communication. This paper assesses student's perspectives of E-learning readiness, its predictors and presents a model for assessing them. A descriptive cross-sectional study of medical students. By proportional quota sampling 284 students responded to a semi-structured self-administered questionnaire adapted from literature. Ethical issues were given full consideration. Analysis was with SPSS version 20, using descriptive statistics, ANOVA, Spearman's correlation, and multiple regression. Statistical significance was considered at P < 0.05. Medical students are ready for E-learning (Mlr = 3.8 > Melr = 3.4), beyond reliance on the face-to-face approach (69.7%), expecting effective (51.1%), and quality improvement in their learning (73.1%). Having basic information and communications technology skills (68.9%) (Mict = 3.7 > Melr = 3.4), access to laptops (76.1%), ability to use web browsers confidently (91.8%) (Mwb = 4.3 > Melr = 3.4), with only few able to use asynchronous tools (45.5%), they consider content design important to attract users (75.6%), and agree they need training on E-learning content (71.4%). They however do not believe the university has enough information technology infrastructure (62.4%) (Mi = 2.7 < Melr = 3.4) nor sufficient professionals to train them (M = 2.9). Predictors are attitude, content readiness, technological readiness, and culture readiness. The model however only explains 37.1% of readiness in the population. Medical students in this environment are ready to advance to E-learning. Predicted by their attitude, content, technological and cultural readiness. Further study with qualitative methodology will help in preparing for this evolution in learning.

Review evaluation indicators of health information technology course of master's degree in medical sciences universities' based on CIPP Model.

PubMed

Yarmohammadian, Mohammad Hossein; Mohebbi, Nooshin

2015-01-01

Sensitivity of teaching and learning processes in universities emphasizes the necessity of assessment of the quality of education which improves the efficiency and effectiveness of the country. This study was conducted with an aim to review and develop the evaluation criteria of health information technology course at Master of Science level in Tehran, Shahid Beheshti, Isfahan, Shiraz, and Kashan medical universities in 2012 by using CIPP model. This was an applied and descriptive research with statistical population of faculty members (23), students (97), directorates (5), and library staff (5), with a total of 130 people, and sampling was done as a census. In order to collect data, four questionnaires were used based on Likert scale with scores ranging from 1 to 5. Questionnaires' validity was confirmed by consulting with health information technology and educational evaluation experts, and questionnaires' reliability of directorates, faculty, students, and library staff was tested using the Cronbach's alpha coefficient formula, which gave r = 0.74, r = 0.93, r = 0.98, and r = 0.80, respectively. SPSS software for data analysis and both descriptive and inferential statistics containing mean, frequency percentage, standard deviation, Pearson correlation, and Spearman correlation were used. With studies from various sources, commentary of experts, and based on the CIPP evaluation model, 139 indicators were determined and then evaluated, which were associated with this course based on the three factors of context, input, and process in the areas of human resources professional, academic services, students, directors, faculty, curriculum, budget, facilities, teaching-learning activities, and scientific research activities of students and faculty, and the activities of the library staff. This study showed that in total, the health information technology course at the Master of Science level is relatively good, but trying to improve and correct it in some areas and continuing the evaluation process seems necessary.

Langley's CSI evolutionary model: Phase O

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Elliott, Kenny B.; Horta, Lucas G.; Bailey, Jim P.; Bruner, Anne M.; Sulla, Jeffrey L.; Won, John; Ugoletti, Roberto M.

1991-01-01

A testbed for the development of Controls Structures Interaction (CSI) technology to improve space science platform pointing is described. The evolutionary nature of the testbed will permit the study of global line-of-sight pointing in phases 0 and 1, whereas, multipayload pointing systems will be studied beginning with phase 2. The design, capabilities, and typical dynamic behavior of the phase 0 version of the CSI evolutionary model (CEM) is documented for investigator both internal and external to NASA. The model description includes line-of-sight pointing measurement, testbed structure, actuators, sensors, and real time computers, as well as finite element and state space models of major components.

Toward a Concept of Facilitative Theorizing: An Alternative to Prescriptive and Descriptive Theory in Educational Technology

ERIC Educational Resources Information Center

Yanchar, Stephen C.; Faulconer, James E.

2011-01-01

This article presents the concept of facilitative theorizing as an alternative to prescriptive and descriptive theory in educational technology. The authors contend that these traditional forms of theory do not offer sufficient assistance to practitioners as they go about everyday design work. Facilitative theorizing, as an alternative, is…

Study and performances analysis of fuel cell assisted vector control variable speed drive system used for electric vehicles

NASA Astrophysics Data System (ADS)

Pachauri, Rupendra Kumar; Chauhan, Yogesh K.

2017-02-01

This paper is a novel attempt to combine two important aspects of fuel cell (FC). First, it presents investigations on FC technology and its applications. A description of FC operating principles is followed by the comparative analysis of the present FC technologies together with the issues concerning various fuels. Second, this paper also proposes a model for the simulation and performances evaluation of a proton exchange membrane fuel cell (PEMFC) generation system. Furthermore, a MATLAB/Simulink-based dynamic model of PEMFC is developed and parameters of FC are so adjusted to emulate a commercially available PEMFC. The system results are obtained for the PEMFC-driven adjusted speed induction motor drive (ASIMD) system, normally used in electric vehicles and analysis is carried out for different operating conditions of FC and ASIMD system. The obtained results prove the validation of system concept and modelling.

Estimation of M 1 scissors mode strength for deformed nuclei in the medium- to heavy-mass region by statistical Hauser-Feshbach model calculations

DOE PAGES

Mumpower, Matthew Ryan; Kawano, Toshihiko; Ullmann, John Leonard; ...

2017-08-17

Radiative neutron capture is an important nuclear reaction whose accurate description is needed for many applications ranging from nuclear technology to nuclear astrophysics. The description of such a process relies on the Hauser-Feshbach theory which requires the nuclear optical potential, level density, and γ-strength function as model inputs. It has recently been suggested that the M1 scissors mode may explain discrepancies between theoretical calculations and evaluated data. We explore statistical model calculations with the strength of the M1 scissors mode estimated to be dependent on the nuclear deformation of the compound system. We show that the form of the M1more » scissors mode improves the theoretical description of evaluated data and the match to experiment in both the fission product and actinide regions. Since the scissors mode occurs in the range of a few keV to a few MeV, it may also impact the neutron capture cross sections of neutron-rich nuclei that participate in the rapid neutron capture process of nucleosynthesis. As a result, we comment on the possible impact to nucleosynthesis by evaluating neutron capture rates for neutron-rich nuclei with the M1 scissors mode active.« less

Main Features of a 3d GIS for a Monumental Complex with AN Historical-Cultural Relevance

NASA Astrophysics Data System (ADS)

Scianna, A.; La Guardia, M.

2017-05-01

The last achievements of technologies in geomatics especially in survey and restitution of 3D models (UAV/drones and laser scanner technologies) generated new procedures and higher standards of quality in representation of archaeological sites. Together with Geomatics, the recent development of Information and Communication Technologies (ICT) strongly contribute to document and the Cultural Heritage (CH). The representation and documentation of CH using these new technologies has became necessary in order to satisfy different needs: - for restorers in order to acquire a deep knowledge of the cultural good and to define possible strategies of restoration; - for the conservation of information, allowing to preserve the 3D geometry of the monumental complex with the integration of descriptions about architectural elements; - for touristic aims, giving the opportunity of sharing CH information on web, allowing users to visit and explore, in a virtual way, monumental complexes, acquiring information details about architectural elements or the history of monumental complex. Looking through these new scenarios, the development of a 3D Geographic Information System (GIS) applied to a cultural good could be, today, an added value of fundamental importance for full description and data management of monumental complexes. In this work, the main features necessary for the correct construction of a 3D GIS of a monumental complex will be analyzed, with a particular focus on the possibilities for creating a standardized procedure to follow.

FY 1992/FY 1993 Budget Descriptive Summaries for the Office of the Secretary of Defense

DTIC Science & Technology

1991-02-01

UNCLASSIFIED AD-A235 927 TC FY 1992/FY 1993 BUDGET DESCRIPTIVE SUMMARIES FOR THE OFFICE OF THE SECRETARY OF DEFENSE FEBRUARY 1991 Dist. A. per...Institute", to be sponsored by the Director of the Office of Science and Technology Policy. The Institute is required to survey the views of US industry...National Critical.Technologies Panel, chaired by the Director of the Office of Science and Technology Policy, and to analyze worldwide trends. The

From innovation to standard practice: Developing and disseminating behavioral procedures

PubMed Central

Paine, Stan C.; Bellamy, G. Thomas

1982-01-01

This paper proposes a three-stage continuum for discussing the development and dissemination of behavioral technology. At the level of behavioral techniques, researchers need only establish a functional relationship between technologically defined intervention procedures and socially significant target behaviors. Dissemination is conducted for informational purposes only, and the purposes and details surrounding subsequent use of the technique are left to the discretion of the user. At the level of behavioral demonstration, a collection of socially acceptable intervention procedures is refined and standardized and must be shown to produce behavior changes across a number of subjects. Here dissemination is conducted, in large part, to generate support for provision of services. At the level of behavioral models, procedural descriptions must be useroriented. Additionally, model effects must be obtainable by agents not associated with their development and must compare favorably with other treatment or service alternatives. The purpose of dissemination at this level is to obtain adoptions and replications of the model. Details of development and dissemination of behavioral technology at each of these three levels are discussed. PMID:22478555

Deciphering the complex: methodological overview of statistical models to derive OMICS-based biomarkers.

PubMed

Chadeau-Hyam, Marc; Campanella, Gianluca; Jombart, Thibaut; Bottolo, Leonardo; Portengen, Lutzen; Vineis, Paolo; Liquet, Benoit; Vermeulen, Roel C H

2013-08-01

Recent technological advances in molecular biology have given rise to numerous large-scale datasets whose analysis imposes serious methodological challenges mainly relating to the size and complex structure of the data. Considerable experience in analyzing such data has been gained over the past decade, mainly in genetics, from the Genome-Wide Association Study era, and more recently in transcriptomics and metabolomics. Building upon the corresponding literature, we provide here a nontechnical overview of well-established methods used to analyze OMICS data within three main types of regression-based approaches: univariate models including multiple testing correction strategies, dimension reduction techniques, and variable selection models. Our methodological description focuses on methods for which ready-to-use implementations are available. We describe the main underlying assumptions, the main features, and advantages and limitations of each of the models. This descriptive summary constitutes a useful tool for driving methodological choices while analyzing OMICS data, especially in environmental epidemiology, where the emergence of the exposome concept clearly calls for unified methods to analyze marginally and jointly complex exposure and OMICS datasets. Copyright © 2013 Wiley Periodicals, Inc.

Comparative Model Tests of SDP and CFA Pile Groups in Non-Cohesive Soil

NASA Astrophysics Data System (ADS)

Krasiński, Adam; Kusio, Tomasz

2015-02-01

The research topic relates to the subject of deep foundations supported on continuous flight auger (CFA) piles and screw displacement piles (SDP). The authors have decided to conduct model tests of foundations supported on the group of piles mentioned above and also the tests of the same piles working as a single. The tests are ongoing in Geotechnical Laboratory of Gdaňsk University of Technology. The description of test procedure, interpretation and analysis of the preliminary testing series results are presented in the paper.

An update of input instructions to TEMOD

NASA Technical Reports Server (NTRS)

1973-01-01

The theory and operation of a FORTRAN 4 computer code, designated as TEMOD, used to calcuate tubular thermoelectric generator performance is described in WANL-TME-1906. The original version of TEMOD was developed in 1969. A description is given of additions to the mathematical model and an update of the input instructions to the code. Although the basic mathematical model described in WANL-TME-1906 has remained unchanged, a substantial number of input/output options were added to allow completion of module performance parametrics as required in support of the compact thermoelectric converter system technology program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R&D) program history (focusing on DOE`s funded efforts) is discussed. The status of the technology elementsmore » (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R&D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory`s unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.« less

Factors Influencing Rapid Prototyping Innovation Implementation: A Descriptive Model

DTIC Science & Technology

1990-03-01

strategy. NDI can be considered as a balance of risk and technological advancement allowing the services to have a system in the field into the...The U.S. military no longer must go through the long, tedious series of events required by the peacetime research and development and service approval...developed, fielded, and evaluated by the fleet in conjunction with fleet introduction (Interim Service Approval). Rapid prototyping conceptually represents

Model-Based Referenceless Quality Metric of 3D Synthesized Images Using Local Image Description.

PubMed

Gu, Ke; Jakhetiya, Vinit; Qiao, Jun-Fei; Li, Xiaoli; Lin, Weisi; Thalmann, Daniel

2017-07-28

New challenges have been brought out along with the emerging of 3D-related technologies such as virtual reality (VR), augmented reality (AR), and mixed reality (MR). Free viewpoint video (FVV), due to its applications in remote surveillance, remote education, etc, based on the flexible selection of direction and viewpoint, has been perceived as the development direction of next-generation video technologies and has drawn a wide range of researchers' attention. Since FVV images are synthesized via a depth image-based rendering (DIBR) procedure in the "blind" environment (without reference images), a reliable real-time blind quality evaluation and monitoring system is urgently required. But existing assessment metrics do not render human judgments faithfully mainly because geometric distortions are generated by DIBR. To this end, this paper proposes a novel referenceless quality metric of DIBR-synthesized images using the autoregression (AR)-based local image description. It was found that, after the AR prediction, the reconstructed error between a DIBR-synthesized image and its AR-predicted image can accurately capture the geometry distortion. The visual saliency is then leveraged to modify the proposed blind quality metric to a sizable margin. Experiments validate the superiority of our no-reference quality method as compared with prevailing full-, reduced- and no-reference models.

An Approach to Object Recognition: Aligning Pictorial Descriptions.

DTIC Science & Technology

1986-12-01

PERFORMING 0RGANIZATION NAMIE ANDORS IS551. PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREKA A WORK UNIT NUMBERS ( 545 Technology... ARTIFICIAL INTELLIGENCE LABORATORY A.I. Memo No. 931 December, 1986 AN APPROACH TO OBJECT RECOGNITION: ALIGNING PICTORIAL DESCRIPTIONS Shimon Ullman...within the Artificial Intelligence Laboratory at the Massachusetts Institute of Technology. Support for the A.I. Laboratory’s artificial intelligence

Innovative technology: Slurry-phase biodegradation. Fact sheet (Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-11-01

The fact sheet provides technology description, site characteristics affecting treatment feasibility, technology considerations, and technology status for Slurry Phase Biodegradation (SPB). The sheet describes how SPB is potentially effective in treating various organic contaminants.

Commercial Aircraft Protection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ehst, David A.

This report summarizes the results of theoretical research performed during 3 years of P371 Project implementation. In results of such research a new scientific conceptual technology of quasi-passive individual infrared protection of heat-generating objects – Spatial Displacement of Thermal Image (SDTI technology) was developed. Theoretical substantiation and description of working processes of civil aircraft individual IR-protection system were conducted. The mathematical models and methodology were presented, there were obtained the analytical dependencies which allow performing theoretical research of the affect of intentionally arranged dynamic field of the artificial thermal interferences with variable contrast onto main parameters of optic-electronic tracking andmore » homing systems.« less

System modelling for LISA Pathfinder

NASA Astrophysics Data System (ADS)

Diaz-Aguiló, Marc; Grynagier, Adrien; Rais, Boutheina

LISA Pathfinder is the technology demonstrator for LISA, a space-borne gravitational waves observatory. The goal of the mission is to characterise the dynamics of the LISA Technology Package (LTP) to prove that on-board experimental conditions are compatible with the de-tection of gravitational waves. The LTP is a drag-free dynamics experiment which includes a control loop with sensors (interferometric and capacitive), actuators (capacitive actuators and thrusters), controlled disturbances (magnetic coils, heaters) and which is subject to various endogenous or exogenous noise sources such as infrared pressure or solar wind. The LTP experiment features new hardware which was never flown in space. The mission has a tight operation timeline as it is constrained to about 100 days. It is therefore vital to have efficient and precise means of investigation and diagnostics to be used during the on-orbit operations. These will be conducted using the LTP Data Analysis toolbox (LTPDA) which allows for simulation, parameter identification and various analyses (covariance analysis, state estimation) given an experimental model. The LTPDA toolbox therefore contains a series of models which are state-space representations of each component in the LTP. The State-Space Models (SSM) are objects of a state-space class within the LTPDA toolbox especially designed to address all the requirements of this tool. The user has access to a set of linear models which represent every satellite subsystem; the models are available in different forms representing 1D, 2D and 3D systems, each with settable symbolic and numeric parameters. To limit the possible errors, the models can be automatically linked to produce composite systems and closed-loops of the LTP. Finally, for the sake of completeness, accuracy and maintainability of the tool, the models contain all the physical information they mimic (i.e. variable units, description of parameters, description of inputs/outputs, etc). Models developed for this work include the fixed-point linearized equations of motion for the LTP and the linear models for sensors and actuators with their noise modelling blocks issued from the analysis of the individual actuators. The drag-free controller model includes the dis-crete delays expected in the hardware. In this work we briefly describe the software architecture, in order to concentrate then on the physical description of the models. This is supported by an overview of different user scenarios and some examples of model analysis that highlight the advantages of this high-level programming engineering toolbox for space mission data analysis and calibration.

Evaluation systems for clinical governance development: a comparative study.

PubMed

Hooshmand, Elaheh; Tourani, Sogand; Ravaghi, Hamid; Ebrahimipour, Hossein

2014-01-01

Lack of scientific and confirmed researches and expert knowledge about evaluation systems for clinical governance development in Iran have made studies on different evaluation systems for clinical governance development a necessity. These studies must provide applied strategies to design criteria of implementing clinical governance for hospital's accreditation. This is a descriptive and comparative study on development of clinical governance models all over the world. Data have been gathered by reviewing related articles. Models have been studied in comprehensive review method. The evaluated models of clinical governance development were Australian, NHS, SPOCK and OPTIGOV. The final aspects extracted from these models were Responsiveness, Policies and Strategies, Organizational Structure, Allocating Resources, Education and Occupational Development, Performance Evaluation, External Evaluation, Patient Oriented Approach, Risk Management, Personnel's Participation, Information Technology, Human Resources, Research and Development, Evidence Based Medicine, Clinical Audit, Health Technology Assessment and Quality. These results are applicable for completing the present criteria which evaluating clinical governance application and provide practical framework to evaluate country's hospital on the basis of clinical governance elements.

Space Interferometry Mission: Measuring the Universe

NASA Technical Reports Server (NTRS)

Marr, James; Dallas, Saterios; Laskin, Robert; Unwin, Stephen; Yu, Jeffrey

1991-01-01

The Space Interferometry Mission (SIM) will be the NASA Origins Program's first space based long baseline interferometric observatory. SIM will use a 10 m Michelson stellar interferometer to provide 4 microarcsecond precision absolute position measurements of stars down to 20th magnitude over its 5 yr. mission lifetime. SIM will also provide technology demonstrations of synthesis imaging and interferometric nulling. This paper describes the what, why and how of the SIM mission, including an overall mission and system description, science objectives, general description of how SIM makes its measurements, description of the design concepts now under consideration, operations concept, and supporting technology program.

A technological infrastructure to sustain Internetworked Enterprises

NASA Astrophysics Data System (ADS)

La Mattina, Ernesto; Savarino, Vincenzo; Vicari, Claudia; Storelli, Davide; Bianchini, Devis

In the Web 3.0 scenario, where information and services are connected by means of their semantics, organizations can improve their competitive advantage by publishing their business and service descriptions. In this scenario, Semantic Peer to Peer (P2P) can play a key role in defining dynamic and highly reconfigurable infrastructures. Organizations can share knowledge and services, using this infrastructure to move towards value networks, an emerging organizational model characterized by fluid boundaries and complex relationships. This chapter collects and defines the technological requirements and architecture of a modular and multi-Layer Peer to Peer infrastructure for SOA-based applications. This technological infrastructure, based on the combination of Semantic Web and P2P technologies, is intended to sustain Internetworked Enterprise configurations, defining a distributed registry and enabling more expressive queries and efficient routing mechanisms. The following sections focus on the overall architecture, while describing the layers that form it.

Space Station Environmental Control/Life Support System engineering

NASA Technical Reports Server (NTRS)

Miller, C. W.; Heppner, D. B.

1985-01-01

The present paper is concerned with a systems engineering study which has provided an understanding of the overall Space Station ECLSS (Environmental Control and Life Support System). ECLSS/functional partitioning is considered along with function criticality, technology alternatives, a technology description, single thread systems, Space Station architectures, ECLSS distribution, mechanical schematics per space station, and Space Station ECLSS characteristics. Attention is given to trade studies and system synergism. The Space Station functional description had been defined by NASA. The ECLSS will utilize technologies which embody regenerative concepts to minimize the use of expendables.

Oil in Ice Project Final Report

DTIC Science & Technology

2018-03-01

describes the various field technology demonstrations and provides an appendix with a description of 11 tactics using the most promising response...This report describes the various field technology demonstrations and provides an appendix with a description of 11 tactics using the most promising...water. RDC developed and evaluated two prototype temporary storage containers that could be mounted on the deck of a WLB. The tie-down method still

Mathematical model of rolling an elastic wheel over deformable support base

NASA Astrophysics Data System (ADS)

Volskaia, V. N.; Zhileykin, M. M.; Zakharov, A. Y.

2018-02-01

One of the main direction of economic growth in Russia remains to be a speedy development of north and northeast regions that are the constituents of the 60 percent of the country territory. The further development of these territories requires new methods and technologies for solving transport and technological problems when off-road transportation of cargoes and people is conducting. One of the fundamental methods of patency prediction is imitation modeling of wheeled vehicles movement in different operating conditions. Both deformable properties of tires and physical and mechanical properties of the ground: normal tire deflection and gauge depth; variation of contact patch area depending on the load and pressure of air in the tire; existence of hysteresis losses in the tire material which are influencing on the rolling resistance due to friction processes between tire and ground in the contact patch; existence of the tangential reaction from the ground by entire contact area influence on the tractive patency. Nowadays there are two main trends in theoretical research of interaction wheeled propulsion device with ground: analytical method involving mathematical description of explored process and finite element method based on computational modeling. Mathematical models of interaction tire with the ground are used both in processes of interaction individual wheeled propulsion device with ground and researches of mobile vehicle dynamical models operated in specific road and climate conditions. One of the most significant imperfection of these models is the description of interaction wheel with flat deformable support base whereas profile of real support base surface has essential height of unevenness which is commensurate with radius of the wheel. The description of processes taking place in the ground under influence of the wheeled propulsion device using the finite element method is relatively new but most applicable lately. The application of this method allows to provide the most accurate description of the interaction process of a wheeled propulsion devices and the ground, also this method allows to define tension in the ground, deformation of the ground and the tire and ground’s compression. However, the high laboriousness of computations is essential shortcoming of that method therefore it’s hard to use these models as part of the general motion model of multi-axis wheeled vehicles. The purpose of this research is the elaboration of mathematical model of elastic wheel rolling over deformable rough support base taking into account the contact patch deformation. The mathematical model of rectilinear rolling an elastic wheel over rough deformable support base, taking into account variation of contact patch area and variation in the direction of the radial and tangential reactions also load bearing capacity of the ground, is developed. The efficiency of developed mathematical model of rectilinear rolling an elastic wheel over rough deformable support base is proved by the simulation methods.

Open Pit Mine 3d Mapping by Tls and Digital Photogrammetry: 3d Model Update Thanks to a Slam Based Approach

NASA Astrophysics Data System (ADS)

Vassena, G.; Clerici, A.

2018-05-01

The state of the art of 3D surveying technologies, if correctly applied, allows to obtain 3D coloured models of large open pit mines using different technologies as terrestrial laser scanner (TLS), with images, combined with UAV based digital photogrammetry. GNSS and/or total station are also currently used to geo reference the model. The University of Brescia has been realised a project to map in 3D an open pit mine located in Botticino, a famous location of marble extraction close to Brescia in North Italy. Terrestrial Laser Scanner 3D point clouds combined with RGB images and digital photogrammetry from UAV have been used to map a large part of the cave. By rigorous and well know procedures a 3D point cloud and mesh model have been obtained using an easy and rigorous approach. After the description of the combined mapping process, the paper describes the innovative process proposed for the daily/weekly update of the model itself. To realize this task a SLAM technology approach is described, using an innovative approach based on an innovative instrument capable to run an automatic localization process and real time on the field change detection analysis.

A History of Sandia’s Water Decision Modeling and Analysis Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowry, Thomas Stephen; Pate, Ronald C.

This document provides a brief narrative, and selected project descriptions, that represent Sandia’s history involving data, modeling, and analysis related to water, energy-water nexus, and energy-water-agriculture nexus within the context of climate change. Sandia National Laboratories has been engaged since the early-1990s with program development involving data, modeling, and analysis projects that address the interdependent issues, risks, and technology-based mitigations associated with increasing demands and stresses being placed on energy, water, and agricultural/food resources, and the related impacts on their security and sustainability in the face of both domestic and global population growth, expanding economic development, and climate change.

Integrating semantic web technologies and geospatial catalog services for geospatial information discovery and processing in cyberinfrastructure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yue, Peng; Gong, Jianya; Di, Liping

Abstract A geospatial catalogue service provides a network-based meta-information repository and interface for advertising and discovering shared geospatial data and services. Descriptive information (i.e., metadata) for geospatial data and services is structured and organized in catalogue services. The approaches currently available for searching and using that information are often inadequate. Semantic Web technologies show promise for better discovery methods by exploiting the underlying semantics. Such development needs special attention from the Cyberinfrastructure perspective, so that the traditional focus on discovery of and access to geospatial data can be expanded to support the increased demand for processing of geospatial information andmore » discovery of knowledge. Semantic descriptions for geospatial data, services, and geoprocessing service chains are structured, organized, and registered through extending elements in the ebXML Registry Information Model (ebRIM) of a geospatial catalogue service, which follows the interface specifications of the Open Geospatial Consortium (OGC) Catalogue Services for the Web (CSW). The process models for geoprocessing service chains, as a type of geospatial knowledge, are captured, registered, and discoverable. Semantics-enhanced discovery for geospatial data, services/service chains, and process models is described. Semantic search middleware that can support virtual data product materialization is developed for the geospatial catalogue service. The creation of such a semantics-enhanced geospatial catalogue service is important in meeting the demands for geospatial information discovery and analysis in Cyberinfrastructure.« less

Natural Environments Definition for Design

NASA Technical Reports Server (NTRS)

Justh, H. L.; Altino, K. M.; Decker, R. K.; Koehler, H. M.; Leahy, F. B.; Minow, J. I.; Roberts, B. C.; Suggs, R. M.; Suggs, R. J.; White, P. W.;

Amended FY 1988/1989 Biennial Budget Justification of Estimates Submitted to Congress

DTIC Science & Technology

1988-02-01

will be installed in order to provide privacy for network data traffic. - Distributed systems technology will continue to be explored, including...techniques and geophysical and satellite data bases to make relevant information rapidly available to the ".fi /./ P ... . C / AMENDED FY 1988/1989...semantic model of available functions and data , %. AMENDED FV 1988/1989 BIENNIAL BUDGET RDT&E DESCRIPTIVE SUMMARY Program Element: fQ1Q0j, Title

Technical description of space ultra reliable modular computer (SUMC), model 2 B

NASA Technical Reports Server (NTRS)

1975-01-01

The design features of the SUMC-2B computer, also called the IBM-HTC are described. It is general purpose digital computer implemented with flexible hardware elements and microprograming to enable low cost customizing to a wide range of applications. It executes the S/360 standard instruction set to maintain problem state compability. Memory technology, extended instruction sets, and I/O channel variations are among the available options.

Information technology industry certification's impact on undergraduate student perception of instructor effectiveness

NASA Astrophysics Data System (ADS)

Andersson, David L.

The field of Computer Information Systems (CIS) or Information Technology (IT) is experiencing rapid change. A 2003 study analyzing the IT degree programs and those of competing disciplines at 10 post-secondary institutions concluded that information technology programs are perceived differently from information systems and computer science programs and are significantly less focused on both math and pure science subjects. In Information Technology programs, voluntary professional certifications, generally known in the Information Technology field as "IT" certifications, are used as indicators of professional skill. A descriptive study noting one subject group's responses to items that were nearly identical except for IT certification information was done to investigate undergraduate CIS/IT student perceptions of IT industry certified instructors. The subject group was comprised of undergraduate CIS/IT students from a regionally accredited private institution and a public institution. The methodology was descriptive, based on a previous model by Dr. McKillip, Professor of Psychology, Southern Illinois University at Carbondale, utilizing a web-based survey instrument with a Likert scale, providing for voluntary anonymous responses outside the classroom over a ten day window. The results indicated that IT certification affected student perceptions of instructor effectiveness, teaching methodology, and student engagement in the class, and to a lesser degree, instructor technical qualifications. The implications suggest that additional research on this topic is merited. Although the study was not designed to examine the precise cause and effect, an important implication is that students may be motivated to attend classes taught by instructors they view as more confident and effective and that teachers with IT industry certification can better engage their students.

Empirical support for global integrated assessment modeling: Productivity trends and technological change in developing countries' agriculture and electric power sectors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathaye, Jayant A.

2000-04-01

Integrated assessment (IA) modeling of climate policy is increasingly global in nature, with models incorporating regional disaggregation. The existing empirical basis for IA modeling, however, largely arises from research on industrialized economies. Given the growing importance of developing countries in determining long-term global energy and carbon emissions trends, filling this gap with improved statistical information on developing countries' energy and carbon-emissions characteristics is an important priority for enhancing IA modeling. Earlier research at LBNL on this topic has focused on assembling and analyzing statistical data on productivity trends and technological change in the energy-intensive manufacturing sectors of five developing countries,more » India, Brazil, Mexico, Indonesia, and South Korea. The proposed work will extend this analysis to the agriculture and electric power sectors in India, South Korea, and two other developing countries. They will also examine the impact of alternative model specifications on estimates of productivity growth and technological change for each of the three sectors, and estimate the contribution of various capital inputs--imported vs. indigenous, rigid vs. malleable-- in contributing to productivity growth and technological change. The project has already produced a data resource on the manufacturing sector which is being shared with IA modelers. This will be extended to the agriculture and electric power sectors, which would also be made accessible to IA modeling groups seeking to enhance the empirical descriptions of developing country characteristics. The project will entail basic statistical and econometric analysis of productivity and energy trends in these developing country sectors, with parameter estimates also made available to modeling groups. The parameter estimates will be developed using alternative model specifications that could be directly utilized by the existing IAMs for the manufacturing, agriculture, and electric power sectors.« less

Lights, Cameras, Pencils! Using Descriptive Video to Enhance Writing

ERIC Educational Resources Information Center

Hoffner, Helen; Baker, Eileen; Quinn, Kathleen Benson

2008-01-01

Students of various ages and abilities can increase their comprehension and build vocabulary with the help of a new technology, Descriptive Video. Descriptive Video (also known as described programming) was developed to give individuals with visual impairments access to visual media such as television programs and films. Described programs,…

Increased Content Knowledge of Students with Visual Impairments as a Result of Extended Descriptions

ERIC Educational Resources Information Center

Ely, Richard; Emerson, Robert Wall; Maggiore, Theresa; Rothberg, Madeleine; O'Connell, Trisha; Hudson, Laurel

2006-01-01

The National Center for Accessible Media has developed a technology and protocol for inserting extended, enhanced descriptions of visually based concepts into artificially paused digital video. These "eDescriptions" describe material not fully explained by a narrator and provide analogies and explanation specifically designed for…

Curriculum Designs for Tech Prep Clusters. PACE '94.

ERIC Educational Resources Information Center

Schoon, Kenneth J., Ed.; Wiles, Clyde A., Ed.

This booklet contains descriptions of various Tech Prep programs developed by PACE (Promoting Academic Excellence In Mathematics, Science & Technology for Workers of the 21st Century). Each entry includes general program descriptions, curriculum outlines, and course descriptions. The clusters and their specialty areas described in the booklet are:…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pesaran, A.A.; Penney, T.R.; Czanderna, A.W.

The objectives of this document are to present an overview of the work accomplished to date on desiccant cooling to provide assessment of the state of the art of desiccant cooling technology in the field of desiccant material dehumidifier components, desiccant systems, and models. The report also discusses the factors that affect the widespread acceptance of desiccant cooling technology. This report is organized as follows. First, a basic description and historical overview of desiccant cooling technology is provided. Then, the recent research and development (R D) program history (focusing on DOE's funded efforts) is discussed. The status of the technologymore » elements (materials, components, systems) is discussed in detail and a preliminary study on the energy impact of desiccant technology is presented. R D needs for advancing the technology in the market are identified. The National Renewable Energy Laboratory's unique desiccant test facilities and their typical outputs are described briefly. Finally, the results of a comprehensive literature search on desiccant cooling are presented in a bibliography. The bibliography contains approximately 900 citations on desiccant cooling.« less

Life assessment of structural components using inelastic finite element analyses

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

1993-01-01

The need for enhanced and improved performance of structural components subject to severe cyclic thermal/mechanical loadings, such as in the aerospace industry, requires development of appropriate solution technologies involving time-dependent inelastic analyses. Such analyses are mandatory to predict local stress-strain response and to assess more accurately the cyclic life time of structural components. The NASA-Lewis Research Center is cognizant of this need. As a result of concerted efforts at Lewis during the last few years, several such finite element solution technologies (in conjunction with the finite element program MARC) were developed and successfully applied to numerous uniaxial and multiaxial problems. These solution technologies, although developed for use with MARC program, are general in nature and can easily be extended for adaptation with other finite element programs such as ABAQUS, ANSYS, etc. The description and results obtained from two such inelastic finite element solution technologies are presented. The first employs a classical (non-unified) creep-plasticity model. An application of this technology is presented for a hypersonic inlet cowl-lip problem. The second of these technologies uses a unified creep-plasticity model put forth by Freed. The structural component for which this finite element solution technology is illustrated, is a cylindrical rocket engine thrust chamber. The advantages of employing a viscoplastic model for nonlinear time-dependent structural analyses are demonstrated. The life analyses for cowl-lip and cylindrical thrust chambers are presented. These analyses are conducted by using the stress-strain response of these components obtained from the corresponding finite element analyses.

Adapting Technological Pedagogical Content Knowledge Framework to Teach Mathematics

ERIC Educational Resources Information Center

Getenet, Seyum Tekeher

2017-01-01

The technological pedagogical content knowledge framework is increasingly in use by educational technology researcher as a generic description of the knowledge requirements for teachers using technology in all subjects. This study describes the development of a mathematics specific variety of the technological pedagogical content knowledge…

Benefits of applying technology to Devonian shale wells. Topical report, July-December 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Voneiff, G.W.; Gatens, J.M.

1993-01-01

The report summarizes the benefits of applying technology to Devonian Shales wells in the Appalachian Basin. The results of the work suggest that an intermediate level of technology application, with an incremental cost of $6,700/well, is best for routine application in the Devonian Shales. The technology level uses conventional well tests, rock mechanical properties logs, a borehole camera, and a moderate logging suite. Most of these tools and technologies should be used on only a portion of the wells in multi-well projects, reducing the per well cost of the technology. Determining the correct reservoir description is critical to optimizing themore » stimulation treatment. The most critical reservoir properties are bulk and matrix permeabilities, net pay, stress profile, and natural fracture spacing in the direction perpendicular to induced hydraulic fractures. Applying technology to improve the accuracy of the reservoir description can significantly increase well profitability.« less

National Technology Transfer Center

NASA Technical Reports Server (NTRS)

Rivers, Lee W.

1992-01-01

Viewgraphs on the National Technology Transfer Center (NTTC) are provided. The NTTC mission is to serve as a hub for the nationwide technology-transfer network to expedite the movement of federally developed technology into the stream of commerce. A description of the Center is provided.

Rapid profiling of Swiss cheese by attenuated total reflectance (ATR) infrared spectroscopy and descriptive sensory analysis.

PubMed

Kocaoglu-Vurma, N A; Eliardi, A; Drake, M A; Rodriguez-Saona, L E; Harper, W J

2009-08-01

The acceptability of cheese depends largely on the flavor formed during ripening. The flavor profiles of cheeses are complex and region- or manufacturer-specific which have made it challenging to understand the chemistry of flavor development and its correlation with sensory properties. Infrared spectroscopy is an attractive technology for the rapid, sensitive, and high-throughput analysis of foods, providing information related to its composition and conformation of food components from the spectra. Our objectives were to establish infrared spectral profiles to discriminate Swiss cheeses produced by different manufacturers in the United States and to develop predictive models for determination of sensory attributes based on infrared spectra. Fifteen samples from 3 Swiss cheese manufacturers were received and analyzed using attenuated total reflectance infrared spectroscopy (ATR-IR). The spectra were analyzed using soft independent modeling of class analogy (SIMCA) to build a classification model. The cheeses were profiled by a trained sensory panel using descriptive sensory analysis. The relationship between the descriptive sensory scores and ATR-IR spectra was assessed using partial least square regression (PLSR) analysis. SIMCA discriminated the Swiss cheeses based on manufacturer and production region. PLSR analysis generated prediction models with correlation coefficients of validation (rVal) between 0.69 and 0.96 with standard error of cross-validation (SECV) ranging from 0.04 to 0.29. Implementation of rapid infrared analysis by the Swiss cheese industry would help to streamline quality assurance.

MECHANICAL DRAFTING AND DESIGN TECHNOLOGY, JOB DESCRIPTIONS AND SUGGESTED TECHNIQUES FOR DETERMINING COURSES OF STUDY IN VOCATIONAL EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

PETERSON, CLARENCE E.

THIS IS THE FIRST OF A SERIES DESIGNED TO PROVIDE AID TO STATES IN ORGANIZING AND OPERATING PROGRAMS UNDER TITLE VIII OF THE NATIONAL DEFENSE EDUCATION ACT, PUBLIC LAW 85-864. IT FURNISHES--(1) GENERAL INFORMATION ABOUT A TECHNOLOGY OR BROAD FIELD OF WORK, (2) COMPOSITE JOB DESCRIPTIONS OF REPRESENTATIVE OCCUPATIONS IN THAT FIELD OF WORK, (3) A…

Cybernetics - The new Era Arrives

NASA Astrophysics Data System (ADS)

Sharma, Anil; Sengar, Chitransh; Bisht, Lalit; Sharma, Deepak

2012-12-01

The paper basically deals with the study of Cybernetics I, the history of evolution of this theory of this cyborg technology from the base to planting its roots in the future. The paper also presents a brief description about the use of this cyber technology in various felids known to the human world. Along with this is a description about the evolution of cybernetics as a cure to various medical problems.

Coal-Burning Technologies Applicable to Air Force Central Heating Plants

DTIC Science & Technology

1989-12-01

8 3. DESCRIPTION OF REPLACEMENT OR EXPANSION TECHNOLOGIES ........ 9 3.1.1 Shell (Fire- Tube ) Boilers ........... 9...3.1.2 Water- Tube Boilers .*.*........***.... 10 3.1.3 Packaged vs Field-Erected Construction ...... 11 3.2 STOKER FIRING ...... .. 11 3.2.1 Description...FIGURES 4 Figure Pg 1 Schematic diagram of a typical scotch shell boiler: wet-back, three-pass design ..~............... 9 2 Commnon tube patterns for

Mars base technology program overview

NASA Technical Reports Server (NTRS)

Chu, Chneg-Chih; Hayati, Samad A.; Udomkesmalee, Suraphol

2005-01-01

In this paper, we present an overview of the current technology portfolio for Mars Base Technology Program. Brief descriptions of the awarded technologies and the high-priority areas in both NRAs are provided to show the current focus of MTP. We also present the approach that MTP uses to evaluate technology maturity for each of the technology tasks.

Accelerator System Model (ASM) user manual with physics and engineering model documentation. ASM version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1993-07-01

The Accelerator System Model (ASM) is a computer program developed to model proton radiofrequency accelerators and to carry out system level trade studies. The ASM FORTRAN subroutines are incorporated into an intuitive graphical user interface which provides for the {open_quotes}construction{close_quotes} of the accelerator in a window on the computer screen. The interface is based on the Shell for Particle Accelerator Related Codes (SPARC) software technology written for the Macintosh operating system in the C programming language. This User Manual describes the operation and use of the ASM application within the SPARC interface. The Appendix provides a detailed description of themore » physics and engineering models used in ASM. ASM Version 1.0 is joint project of G. H. Gillespie Associates, Inc. and the Accelerator Technology (AT) Division of the Los Alamos National Laboratory. Neither the ASM Version 1.0 software nor this ASM Documentation may be reproduced without the expressed written consent of both the Los Alamos National Laboratory and G. H. Gillespie Associates, Inc.« less

Induced pluripotent stem cell technology for modelling and therapy of cerebellar ataxia

PubMed Central

Watson, Lauren M.; Wong, Maggie M. K.; Becker, Esther B. E.

2015-01-01

Induced pluripotent stem cell (iPSC) technology has emerged as an important tool in understanding, and potentially reversing, disease pathology. This is particularly true in the case of neurodegenerative diseases, in which the affected cell types are not readily accessible for study. Since the first descriptions of iPSC-based disease modelling, considerable advances have been made in understanding the aetiology and progression of a diverse array of neurodegenerative conditions, including Parkinson's disease and Alzheimer's disease. To date, however, relatively few studies have succeeded in using iPSCs to model the neurodegeneration observed in cerebellar ataxia. Given the distinct neurodevelopmental phenotypes associated with certain types of ataxia, iPSC-based models are likely to provide significant insights, not only into disease progression, but also to the development of early-intervention therapies. In this review, we describe the existing iPSC-based disease models of this heterogeneous group of conditions and explore the challenges associated with generating cerebellar neurons from iPSCs, which have thus far hindered the expansion of this research. PMID:26136256

Interoperability of Neuroscience Modeling Software

PubMed Central

Cannon, Robert C.; Gewaltig, Marc-Oliver; Gleeson, Padraig; Bhalla, Upinder S.; Cornelis, Hugo; Hines, Michael L.; Howell, Fredrick W.; Muller, Eilif; Stiles, Joel R.; Wils, Stefan; De Schutter, Erik

2009-01-01

Neuroscience increasingly uses computational models to assist in the exploration and interpretation of complex phenomena. As a result, considerable effort is invested in the development of software tools and technologies for numerical simulations and for the creation and publication of models. The diversity of related tools leads to the duplication of effort and hinders model reuse. Development practices and technologies that support interoperability between software systems therefore play an important role in making the modeling process more efficient and in ensuring that published models can be reliably and easily reused. Various forms of interoperability are possible including the development of portable model description standards, the adoption of common simulation languages or the use of standardized middleware. Each of these approaches finds applications within the broad range of current modeling activity. However more effort is required in many areas to enable new scientific questions to be addressed. Here we present the conclusions of the “Neuro-IT Interoperability of Simulators” workshop, held at the 11th computational neuroscience meeting in Edinburgh (July 19-20 2006; http://www.cnsorg.org). We assess the current state of interoperability of neural simulation software and explore the future directions that will enable the field to advance. PMID:17873374

Graphics-processing-unit-accelerated finite-difference time-domain simulation of the interaction between ultrashort laser pulses and metal nanoparticles

NASA Astrophysics Data System (ADS)

Nikolskiy, V. P.; Stegailov, V. V.

2018-01-01

Metal nanoparticles (NPs) serve as important tools for many modern technologies. However, the proper microscopic models of the interaction between ultrashort laser pulses and metal NPs are currently not very well developed in many cases. One part of the problem is the description of the warm dense matter that is formed in NPs after intense irradiation. Another part of the problem is the description of the electromagnetic waves around NPs. Description of wave propagation requires the solution of Maxwell’s equations and the finite-difference time-domain (FDTD) method is the classic approach for solving them. There are many commercial and free implementations of FDTD, including the open source software that supports graphics processing unit (GPU) acceleration. In this report we present the results on the FDTD calculations for different cases of the interaction between ultrashort laser pulses and metal nanoparticles. Following our previous results, we analyze the efficiency of the GPU acceleration of the FDTD algorithm.

Teachers, Technology, and Training. Perspectives on Education and School Reform: A Focus on the Technological Perspective.

ERIC Educational Resources Information Center

Donlevy, James G.; Donlevy, Tia Rice

1996-01-01

The language of school reform is rooted predominantly in the technological perspective. Reviews technological, psychological, ideological, and sociological (descriptive and prescriptive) perspectives and elaborates on the technological, highlighting the need for competitive education, especially in math and science; efficient programs (physical…

Transportation Technology Curriculum Materials FY 90. Illinois Plan for Industrial Technology Education.

ERIC Educational Resources Information Center

Gallo, Dennis; And Others

This packet contains technology-based learning activities for the transportation technology course at the orientation level (grades 9 and 10) of the Illinois Plan for Industrial Technology Education curriculum project. The packet includes a course rationale, mission, description, and course outline. Suggested learning objectives and suggested…

An overview of the active flexible wing program

NASA Technical Reports Server (NTRS)

Cole, Stanley R.; Perry, Boyd, III; Miller, Gerald D.

1991-01-01

An outline of the Active Flexible Wing (AFW) project that was meant to serve as an introduction to an entire session of the Computational Control Workshop is presented. Following background information on the project is a description of the AFW wind tunnel model and results from the initial wind tunnel test of the AFW model under the current project. Emphasis is on major project accomplishments. The AFW project is an effort to demonstrate aeroelastic control through the application of digital controls technology. Active flutter suppression and active control of maneuver loads during high speed rolling maneuvers are examined.

Opening Public Administration: Exploring Open Innovation Archetypes and Business Model Impacts

NASA Astrophysics Data System (ADS)

Feller, Joseph; Finnegan, Patrick; Nilsson, Olof

This work-in-progress paper presents an exploration of a network of Swedish municipal authorities. Within this network, we have observed a move from isolated innovation to leveraging inflows and outflows of knowledge in a manner characteristic of the open innovation paradigm. This paper presents a characterization of these knowledge exchanges using an existing framework of open innovation archetypes, as well as an initial description of the business model impacts of this innovation approach on the participant municipalities, and the enabling role of information technology. The paper concludes by drawing preliminary conclusions and outlining ongoing research.

Technology and the Transformation of Archival Description

ERIC Educational Resources Information Center

Pitti, Daniel V.

2005-01-01

The emergence of computer and network technologies has presented the archival profession with daunting challenges as well as inspiring opportunities. Archivists have been actively imagining and realizing the application of advanced technologies to their professional functions and activities. Using advanced technologies, archivists have been…

Extending the performance of single-degree-of-freedom rate integrating gyros in strapdown applications

NASA Astrophysics Data System (ADS)

Baker, G. N.

This paper examines the constraints upon a typical manufacturer of gyros and strapdown systems. It describes that while being responsive to exchange and keeping abreast of 'state of the art' technology, there are many reasons why the manufacturer must satisfy the market using existing technology and production equipment. The Single-Degree-of-Freedom Rate Integrating Gyro is a well established product, yet is capable of achieving far higher performances than originally envisaged due to modelling and characterization within digital strapdown systems. The parameters involved are discussed, and a description given of the calibration process undertaken on a strapdown system being manufactured in a production environment in batch quantities.

Generalized Advanced Propeller Analysis System (GAPAS). Volume 2: Computer program user manual

NASA Technical Reports Server (NTRS)

Glatt, L.; Crawford, D. R.; Kosmatka, J. B.; Swigart, R. J.; Wong, E. W.

1986-01-01

The Generalized Advanced Propeller Analysis System (GAPAS) computer code is described. GAPAS was developed to analyze advanced technology multi-bladed propellers which operate on aircraft with speeds up to Mach 0.8 and altitudes up to 40,000 feet. GAPAS includes technology for analyzing aerodynamic, structural, and acoustic performance of propellers. The computer code was developed for the CDC 7600 computer and is currently available for industrial use on the NASA Langley computer. A description of all the analytical models incorporated in GAPAS is included. Sample calculations are also described as well as users requirements for modifying the analysis system. Computer system core requirements and running times are also discussed.

Efficient model checking of network authentication protocol based on SPIN

NASA Astrophysics Data System (ADS)

Tan, Zhi-hua; Zhang, Da-fang; Miao, Li; Zhao, Dan

2013-03-01

Model checking is a very useful technique for verifying the network authentication protocols. In order to improve the efficiency of modeling and verification on the protocols with the model checking technology, this paper first proposes a universal formalization description method of the protocol. Combined with the model checker SPIN, the method can expediently verify the properties of the protocol. By some modeling simplified strategies, this paper can model several protocols efficiently, and reduce the states space of the model. Compared with the previous literature, this paper achieves higher degree of automation, and better efficiency of verification. Finally based on the method described in the paper, we model and verify the Privacy and Key Management (PKM) authentication protocol. The experimental results show that the method of model checking is effective, which is useful for the other authentication protocols.

DEMONSTRATION BULLETIN: PEROX-PURE CHEMICAL OXIDATION TREATMENT

EPA Science Inventory

Technology Description: The perox-pure™ chemical oxidation treatment technology was developed by Peroxidation Systems, Inc. (PSI), to destroy dissolved organic contaminants in water. The technology uses ultraviolet (UV) radiation and hydrogen peroxide to oxidize organic co...

Challenges of Information Technology Security in the NASA Environment

NASA Technical Reports Server (NTRS)

Santiago, S. S.

2000-01-01

A brief description of the NASA organization and how the CIO responsibilities are integrated into that organization followed by an introduction of the NASA ITS Program goals and objectives. An overview of the four major enterprises' cultures and how those cultures tie back to the Enterprises' missions. A description of the ITS challenges that exist stemming from the competing NASA Enterprises' requirements and how they have formed the basis of the NASA ITS Program. A talk will focus on policies and procedures and the technology being incorporated into the NASA infrastructure and how that technology ties back to the policies and procedures.

Life cycle assessment of thermal waste-to-energy technologies: review and recommendations.

PubMed

Astrup, Thomas Fruergaard; Tonini, Davide; Turconi, Roberto; Boldrin, Alessio

2015-03-01

Life cycle assessment (LCA) has been used extensively within the recent decade to evaluate the environmental performance of thermal Waste-to-Energy (WtE) technologies: incineration, co-combustion, pyrolysis and gasification. A critical review was carried out involving 250 individual case-studies published in 136 peer-reviewed journal articles within 1995 and 2013. The studies were evaluated with respect to critical aspects such as: (i) goal and scope definitions (e.g. functional units, system boundaries, temporal and geographic scopes), (ii) detailed technology parameters (e.g. related to waste composition, technology, gas cleaning, energy recovery, residue management, and inventory data), and (iii) modeling principles (e.g. energy/mass calculation principles, energy substitution, inclusion of capital goods and uncertainty evaluation). Very few of the published studies provided full and transparent descriptions of all these aspects, in many cases preventing an evaluation of the validity of results, and limiting applicability of data and results in other contexts. The review clearly suggests that the quality of LCA studies of WtE technologies and systems including energy recovery can be significantly improved. Based on the review, a detailed overview of assumptions and modeling choices in existing literature is provided in conjunction with practical recommendations for state-of-the-art LCA of Waste-to-Energy. Copyright © 2014 Elsevier Ltd. All rights reserved.

Airline return-on-investment model for technology evaluation. [computer program to measure economic value of advanced technology applied to passenger aircraft

NASA Technical Reports Server (NTRS)

1974-01-01

This report presents the derivation, description, and operating instructions for a computer program (TEKVAL) which measures the economic value of advanced technology features applied to long range commercial passenger aircraft. The program consists of three modules; and airplane sizing routine, a direct operating cost routine, and an airline return-on-investment routine. These modules are linked such that they may be operated sequentially or individually, with one routine generating the input for the next or with the option of externally specifying the input for either of the economic routines. A very simple airplane sizing technique was previously developed, based on the Brequet range equation. For this program, that sizing technique has been greatly expanded and combined with the formerly separate DOC and ROI programs to produce TEKVAL.

Bioinspired Technologies to Connect Musculoskeletal Mechanobiology to the Person for Training and Rehabilitation

PubMed Central

Pizzolato, Claudio; Lloyd, David G.; Barrett, Rod S.; Cook, Jill L.; Zheng, Ming H.; Besier, Thor F.; Saxby, David J.

2017-01-01

Musculoskeletal tissues respond to optimal mechanical signals (e.g., strains) through anabolic adaptations, while mechanical signals above and below optimal levels cause tissue catabolism. If an individual's physical behavior could be altered to generate optimal mechanical signaling to musculoskeletal tissues, then targeted strengthening and/or repair would be possible. We propose new bioinspired technologies to provide real-time biofeedback of relevant mechanical signals to guide training and rehabilitation. In this review we provide a description of how wearable devices may be used in conjunction with computational rigid-body and continuum models of musculoskeletal tissues to produce real-time estimates of localized tissue stresses and strains. It is proposed that these bioinspired technologies will facilitate a new approach to physical training that promotes tissue strengthening and/or repair through optimal tissue loading. PMID:29093676

Seamless Management of Paper and Electronic Documents for Task Knowledge Sharing

NASA Astrophysics Data System (ADS)

Kojima, Hiroyuki; Iwata, Ken

Due to the progress of Internet technology and the increase of distributed information on networks, the present knowledge management has been based more and more on the performance of various experienced users. In addition to the increase of electronic documents, the use of paper documents has not been reduced because of their convenience. This paper describes a method of tracking paper document locations and contents using radio frequency identification (RFID) technology. This research also focuses on the expression of a task process and the seamless structuring of related electronic and paper documents as a result of task knowledge formalization using information organizing. A system is proposed here that implements information organization for both Web documents and paper documents with the task model description and RFID technology. Examples of a prototype system are also presented.

Object-oriented biomedical system modelling--the language.

PubMed

Hakman, M; Groth, T

1999-11-01

The paper describes a new object-oriented biomedical continuous system modelling language (OOBSML). It is fully object-oriented and supports model inheritance, encapsulation, and model component instantiation and behaviour polymorphism. Besides the traditional differential and algebraic equation expressions the language includes also formal expressions for documenting models and defining model quantity types and quantity units. It supports explicit definition of model input-, output- and state quantities, model components and component connections. The OOBSML model compiler produces self-contained, independent, executable model components that can be instantiated and used within other OOBSML models and/or stored within model and model component libraries. In this way complex models can be structured as multilevel, multi-component model hierarchies. Technically the model components produced by the OOBSML compiler are executable computer code objects based on distributed object and object request broker technology. This paper includes both the language tutorial and the formal language syntax and semantic description.

Rescue Assault Forces--Integrated Strategic Role in National Security

DTIC Science & Technology

1982-06-04

Descriptions and simulations (198O), , I ’ Henry B. Well, hevelopent of a Dynamic Model to Evaluate the Effect of Natural Resource Policies on Recovery...Following a Nuciear Attack, Final Report, VoT I, DFscriptions and simulations (081TrT0-ll. , p. 28. Refers to quotes by Stalin and Brezhnev threatening...race is now on to develop laser and particle beam technology as missile defense systems for employment in outer space or _j from ground defense bases

Commercial Capaciflector

NASA Technical Reports Server (NTRS)

Vranish, John M.

1991-01-01

A capacitive proximity/tactile sensor with unique performance capabilities ('capaciflector' or capacitive reflector) is being developed by NASA/Goddard Space Flight Center (GSFC) for use on robots and payloads in space in the interests of safety, efficiency, and ease of operation. Specifically, this sensor will permit robots and their attached payloads to avoid collisions in space with humans and other objects and to dock these payloads in a cluttered environment. The sensor is simple, robust, and inexpensive to manufacture with obvious and recognized commercial possibilities. Accordingly, NASA/GSFC, in conjunction with industry, is embarking on an effort to 'spin' this technology off into the private sector. This effort includes prototypes aimed at commercial applications. The principles of operation of these prototypes are described along with hardware, software, modelling, and test results. The hardware description includes both the physical sensor in terms of a flexible printed circuit board and the electronic circuitry. The software description will include filtering and detection techniques. The modelling will involve finite element electric field analysis and will underline techniques used for design optimization.

Simplifying the Reuse and Interoperability of Geoscience Data Sets and Models with Semantic Metadata that is Human-Readable and Machine-actionable

NASA Astrophysics Data System (ADS)

Peckham, S. D.

2017-12-01

Standardized, deep descriptions of digital resources (e.g. data sets, computational models, software tools and publications) make it possible to develop user-friendly software systems that assist scientists with the discovery and appropriate use of these resources. Semantic metadata makes it possible for machines to take actions on behalf of humans, such as automatically identifying the resources needed to solve a given problem, retrieving them and then automatically connecting them (despite their heterogeneity) into a functioning workflow. Standardized model metadata also helps model users to understand the important details that underpin computational models and to compare the capabilities of different models. These details include simplifying assumptions on the physics, governing equations and the numerical methods used to solve them, discretization of space (the grid) and time (the time-stepping scheme), state variables (input or output), model configuration parameters. This kind of metadata provides a "deep description" of a computational model that goes well beyond other types of metadata (e.g. author, purpose, scientific domain, programming language, digital rights, provenance, execution) and captures the science that underpins a model. A carefully constructed, unambiguous and rules-based schema to address this problem, called the Geoscience Standard Names ontology will be presented that utilizes Semantic Web best practices and technologies. It has also been designed to work across science domains and to be readable by both humans and machines.

Intention to Use and Actual Use of Electronic Information Resources: Further Exploring Technology Acceptance Model (TAM)

PubMed Central

Tao, Donghua

2009-01-01

Following up a previous study that examined public health students’ intention to use e-resources for completing research paper assignments, the present study proposed two models to investigate whether or not public health students actually used the e-resources they intended to use and whether or not the determinants of intention to use predict actual use of e-resources. Focus groups and pre- and post-questionnaires were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that the determinants of intention-to-use significantly predict actual use behavior. Direct impact of perceived usefulness and indirect impact of perceived ease of use to both behavior intention and actual behavior indicated the importance of ease of use at the early stage of technology acceptance. Non-significant intention-behavior relationship prompted thoughts on the measurement of actual behavior and multidimensional characteristics of the intention construct. PMID:20351931

75 FR 30795 - Office of Special Education and Rehabilitative Services; Overview Information; Technology and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... Information; Technology and Media Services for Individuals With Disabilities--Television Access; Notice.... Funding Opportunity Description Purpose of Program: The purposes of the Technology and Media Services for... the development, demonstration, and use of technology; (2) support educational media services...

Advanced Platform Systems Technology study. Volume 4: Technology advancement program plan

NASA Technical Reports Server (NTRS)

1983-01-01

An overview study of the major technology definition tasks and subtasks along with their interfaces and interrelationships is presented. Although not specifically indicated in the diagram, iterations were required at many steps to finalize the results. The development of the integrated technology advancement plan was initiated by using the results of the previous two tasks, i.e., the trade studies and the preliminary cost and schedule estimates for the selected technologies. Descriptions for the development of each viable technology advancement was drawn from the trade studies. Additionally, a logic flow diagram depicting the steps in developing each technology element was developed along with descriptions for each of the major elements. Next, major elements of the logic flow diagrams were time phased, and that allowed the definition of a technology development schedule that was consistent with the space station program schedule when possible. Schedules show the major milestone including tests required as described in the logic flow diagrams.

A Study of Business Incubators: Models, Best Practices, and Recommendations for NASA and Florida

NASA Technical Reports Server (NTRS)

1997-01-01

This study was conducted to provide NASA-Kennedy Space Center with information and recommendations to support establishing one or more technology-based business incubators In Florida. The study involved assembling information about incubators: why they succeed, why they fail, how they are organized, and what services they provide. Consequently, this study focuses on widely-recognized "best practices," needed to establish successful technology- based business incubators. The findings are used to optimize the design and implementation of one or more technology-based business incubators to be established in Florida. Recommendations reflect both the essential characteristics of successful incubators and the optimal business demographics in Florida. Appendix A provides a fuller description of the objectives of the study. Technology-based business incubators are an increasing catalyst of new business development across the USi Incubators focus on providing entrepreneurs and small start-up firms with a wide array of support services necessary to bring forth new products and processes based on technologies developed in the nation's federal and private laboratories and universities. Appendix B provides extensive discussion of findings relative to technology- based business incubators.

Barotropic Tidal Predictions and Validation in a Relocatable Modeling Environment. Revised

NASA Technical Reports Server (NTRS)

Mehra, Avichal; Passi, Ranjit; Kantha, Lakshmi; Payne, Steven; Brahmachari, Shuvobroto

1998-01-01

Under funding from the Office of Naval Research (ONR), the Mississippi State University Center for Air Sea Technology (CAST) has been working on developing a Relocatable Modeling Environment (RME) to provide a uniform and unbiased infrastructure for efficiently configuring numerical models in any geographic or oceanic region. Under Naval Oceanographic Office (NAVOCEANO) funding, the model was implemented and tested for NAVOCEANO use. With our current emphasis on ocean tidal modeling, CAST has adopted the Colorado University's numerical ocean model, known as CURReNTSS (Colorado University Rapidly Relocatable Nestable Storm Surge) Model, as the model of choice. During the RME development process, CURReNTSS has been relocated to several coastal oceanic regions, providing excellent results that demonstrate its veracity. This report documents the model validation results and provides a brief description of the Graphic user Interface.

A digital photographic measurement method for quantifying foot posture: validity, reliability, and descriptive data.

PubMed

Cobb, Stephen C; James, C Roger; Hjertstedt, Matthew; Kruk, James

2011-01-01

Although abnormal foot posture long has been associated with lower extremity injury risk, the evidence is equivocal. Poor intertester reliability of traditional foot measures might contribute to the inconsistency. To investigate the validity and reliability of a digital photographic measurement method (DPMM) technology, the reliability of DPMM-quantified foot measures, and the concurrent validity of the DPMM with clinical-measurement methods (CMMs) and to report descriptive data for DPMM measures with moderate to high intratester and intertester reliability. Descriptive laboratory study. Biomechanics research laboratory. A total of 159 people participated in 3 groups. Twenty-eight people (11 men, 17 women; age  =  25 ± 5 years, height  =  1.71 ± 0.10 m, mass  =  77.6 ± 17.3 kg) were recruited for investigation of intratester and intertester reliability of the DPMM technology; 20 (10 men, 10 women; age  =  24 ± 2 years, height  =  1.71 ± 0.09 m, mass  =  76 ± 16 kg) for investigation of DPMM and CMM reliability and concurrent validity; and 111 (42 men, 69 women; age  =  22.8 ± 4.7 years, height  =  168.5 ± 10.4 cm, mass  =  69.8 ± 13.3 kg) for development of a descriptive data set of the DPMM foot measurements with moderate to high intratester and intertester reliabilities. The dimensions of 10 model rectangles and the 28 participants' feet were measured, and DPMM foot posture was measured in the 111 participants. Two clinicians assessed the DPMM and CMM foot measures of the 20 participants. Validity and reliability were evaluated using mean absolute and percentage errors and intraclass correlation coefficients. Descriptive data were computed from the DPMM foot posture measures. The DPMM technology intratester and intertester reliability intraclass correlation coefficients were 1.0 for each tester and variable. Mean absolute errors were equal to or less than 0.2 mm for the bottom and right-side variables and 0.1° for the calculated angle variable. Mean percentage errors between the DPMM and criterion reference values were equal to or less than 0.4%. Intratester and intertester reliabilities of DPMM-computed structural measures of arch and navicular indices were moderate to high (>0.78), and concurrent validity was moderate to strong. The DPMM is a valid and reliable clinical and research tool for quantifying foot structure. The DPMM and the descriptive data might be used to define groups in future studies in which the relationship between foot posture and function or injury risk is investigated.

Assessment of Technologies for the Space Shuttle External Tank Thermal Protection System and Recommendations for Technology Improvement - Part III: Material Property Characterization, Analysis, and Test Methods

NASA Technical Reports Server (NTRS)

Gates, Thomas S.; Johnson, Theodore F.; Whitley, Karen S.

2005-01-01

The objective of this report is to contribute to the independent assessment of the Space Shuttle External Tank Foam Material. This report specifically addresses material modeling, characterization testing, data reduction methods, and data pedigree. A brief description of the External Tank foam materials, locations, and standard failure modes is provided to develop suitable background information. A review of mechanics based analysis methods from the open literature is used to provide an assessment of the state-of-the-art in material modeling of closed cell foams. Further, this report assesses the existing material property database and investigates sources of material property variability. The report presents identified deficiencies in testing methods and procedures, recommendations for additional testing as required, identification of near-term improvements that should be pursued, and long-term capabilities or enhancements that should be developed.

The Nuclear Energy Advanced Modeling and Simulation Enabling Computational Technologies FY09 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diachin, L F; Garaizar, F X; Henson, V E

2009-10-12

In this document we report on the status of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Enabling Computational Technologies (ECT) effort. In particular, we provide the context for ECT In the broader NEAMS program and describe the three pillars of the ECT effort, namely, (1) tools and libraries, (2) software quality assurance, and (3) computational facility (computers, storage, etc) needs. We report on our FY09 deliverables to determine the needs of the integrated performance and safety codes (IPSCs) in these three areas and lay out the general plan for software quality assurance to meet the requirements of DOE andmore » the DOE Advanced Fuel Cycle Initiative (AFCI). We conclude with a brief description of our interactions with the Idaho National Laboratory computer center to determine what is needed to expand their role as a NEAMS user facility.« less

Study of a Tracking and Data Acquisition System (TDAS) in the 1990's

NASA Technical Reports Server (NTRS)

1981-01-01

Progress in concept definition studies, operational assessments, and technology demonstrations for the Tracking and Data Acquisition System (TDAS) is reported. The proposed TDAS will be the follow-on to the Tracking and Data Relay Satellite System and will function as a key element of the NASA End-to-End Data System, providing the tracking and data acquisition interface between user accessible data ports on Earth and the user's spaceborne equipment. Technical activities of the "spacecraft data system architecture' task and the "communication mission model' task are emphasized. The objective of the first task is to provide technology forecasts for sensor data handling, navigation and communication systems, and estimate corresponding costs. The second task is concerned with developing a parametric description of the required communication channels. Other tasks with significant activity include the "frequency plan and radio interference model' and the "Viterbi decoder/simulator study'.

An Examination of the Relationship between Principal Technology Leadership and Technology Integration in Urban Schools

ERIC Educational Resources Information Center

Draper, Kathryn L.

2013-01-01

The purpose of this exploratory/quantitative descriptive and correlational study was to examine the relationship between principal technology leadership and technology integration in urban schools. The technology activities of principals along with Organizational Health Instrument (OHI) survey outcomes perceived by their faculty were described and…

Thesaurus Dataset of Educational Technology in Chinese

ERIC Educational Resources Information Center

Wu, Linjing; Liu, Qingtang; Zhao, Gang; Huang, Huan; Huang, Tao

2015-01-01

The thesaurus dataset of educational technology is a knowledge description of educational technology in Chinese. The aims of this thesaurus were to collect the subject terms in the domain of educational technology, facilitate the standardization of terminology and promote the communication between Chinese researchers and scholars from various…

A Comparison of Technology Education Programs in Eight Asia-Pacific Countries.

ERIC Educational Resources Information Center

Lee, Lung-Sheng

To improve technology education in Taiwan and promote understanding of international technology education, technology education programs in Australia, Japan, Korea, Mainland China, Malaysia, New Zealand, the Philippines, and Taiwan were compared. A four-stage comparative approach (description, interpretation, juxtaposition, comparison) was used.…

Information model construction of MES oriented to mechanical blanking workshop

NASA Astrophysics Data System (ADS)

Wang, Jin-bo; Wang, Jin-ye; Yue, Yan-fang; Yao, Xue-min

2016-11-01

Manufacturing Execution System (MES) is one of the crucial technologies to implement informatization management in manufacturing enterprises, and the construction of its information model is the base of MES database development. Basis on the analysis of the manufacturing process information in mechanical blanking workshop and the information requirement of MES every function module, the IDEF1X method was adopted to construct the information model of MES oriented to mechanical blanking workshop, and a detailed description of the data structure feature included in MES every function module and their logical relationship was given from the point of view of information relationship, which laid the foundation for the design of MES database.

P80 SRM low torque flex-seal development - thermal and chemical modeling of molding process

NASA Astrophysics Data System (ADS)

Descamps, C.; Gautronneau, E.; Rousseau, G.; Daurat, M.

2009-09-01

The development of the flex-seal component of the P80 nozzle gave the opportunity to set up new design and manufacturing process methods. Due to the short development lead time required by VEGA program, the usual manufacturing iterative tests work flow, which is usually time consuming, had to be enhanced in order to use a more predictive approach. A newly refined rubber vulcanization description was built up and identified on laboratory samples. This chemical model was implemented in a thermal analysis code. The complete model successfully supports the manufacturing processes. These activities were conducted with the support of ESA/CNES Research & Technologies and DGA (General Delegation for Armament).

Performance of GeantV EM Physics Models

NASA Astrophysics Data System (ADS)

Amadio, G.; Ananya, A.; Apostolakis, J.; Aurora, A.; Bandieramonte, M.; Bhattacharyya, A.; Bianchini, C.; Brun, R.; Canal, P.; Carminati, F.; Cosmo, G.; Duhem, L.; Elvira, D.; Folger, G.; Gheata, A.; Gheata, M.; Goulas, I.; Iope, R.; Jun, S. Y.; Lima, G.; Mohanty, A.; Nikitina, T.; Novak, M.; Pokorski, W.; Ribon, A.; Seghal, R.; Shadura, O.; Vallecorsa, S.; Wenzel, S.; Zhang, Y.

2017-10-01

The recent progress in parallel hardware architectures with deeper vector pipelines or many-cores technologies brings opportunities for HEP experiments to take advantage of SIMD and SIMT computing models. Launched in 2013, the GeantV project studies performance gains in propagating multiple particles in parallel, improving instruction throughput and data locality in HEP event simulation on modern parallel hardware architecture. Due to the complexity of geometry description and physics algorithms of a typical HEP application, performance analysis is indispensable in identifying factors limiting parallel execution. In this report, we will present design considerations and preliminary computing performance of GeantV physics models on coprocessors (Intel Xeon Phi and NVidia GPUs) as well as on mainstream CPUs.

COMO: a numerical model for predicting furnace performance in axisymmetric geometries. Volume 1. Technical summary. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiveland, W.A.; Oberjohn, W.J.; Cornelius, D.K.

1985-12-01

This report summarizes the work conducted during a 30-month contract with the United States Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC). The general objective is to develop and verify a computer code capable of modeling the major aspects of pulverized coal combustion. Achieving this objective will lead to design methods applicable to industrial and utility furnaces. The combustion model (COMO) is based mainly on an existing Babcock and Wilcox (B and W) computer program. The model consists of a number of relatively independent modules that represent the major processes involved in pulverized coal combustion: flow, heterogeneous and homogeneousmore » chemical reaction, and heat transfer. As models are improved or as new ones are developed, this modular structure allows portions of the COMO model to be updated with minimal impact on the remainder of the program. The report consists of two volumes. This volume (Volume 1) contains a technical summary of the COMO model, results of predictions for gas phase combustion, pulverized coal combustion, and a detailed description of the COMO model. Volume 2 is the Users Guide for COMO and contains detailed instructions for preparing the input data and a description of the program output. Several example cases have been included to aid the user in usage of the computer program for pulverized coal applications. 66 refs., 41 figs., 21 tabs.« less

A Pilot Model for the NASA Simplified Aid for EVA Rescue (SAFER) (Single-Axis Pitch Task)

NASA Astrophysics Data System (ADS)

Handley, Patrick Mark

This thesis defines, tests, and validates a descriptive pilot model for a single-axis pitch control task of the Simplified Aid for EVA Rescue (SAFER). SAFER is a small propulsive jetpack used by astronauts for self-rescue. Pilot model research supports development of improved self-rescue strategies and technologies through insights into pilot behavior.This thesis defines a multi-loop pilot model. The innermost loop controls the hand controller, the middle loop controls pitch rate, and the outer loop controls pitch angle. A human-in-the-loop simulation was conducted to gather data from a human pilot. Quantitative and qualitative metrics both indicate that the model is an acceptable fit to the human data. Fuel consumption was nearly identical; time to task completion matched very well. There is some evidence that the model responds faster to initial pitch rates than the human, artificially decreasing the model's time to task completion. This pilot model is descriptive, not predictive, of the human pilot. Insights are made into pilot behavior from this research. Symmetry implies that the human responds to positive and negative initial conditions with the same strategy. The human pilot appears indifferent to pitch angles within 0.5 deg, coasts at a constant pitch rate 1.09 deg/s, and has a reaction delay of 0.1 s.

Impact of Healthcare Information Technology on Nursing Practice.

PubMed

Piscotty, Ronald J; Kalisch, Beatrice; Gracey-Thomas, Angel

2015-07-01

To report additional mediation findings from a descriptive cross sectional study to examine if nurses' perceptions of the impact of healthcare information technology on their practice mediates the relationship between electronic nursing care reminder use and missed nursing care. The study used a descriptive design. The sample (N = 165) was composed of registered nurses working on acute care hospital units. The sample was obtained from a large teaching hospital in Southeast Michigan in the fall of 2012. All eligible nursing units (n = 19) were included. The MISSCARE Survey, Nursing Care Reminders Usage Survey, and the Impact of Healthcare Information Technology Scale were used to collect data to test for mediation. Mediation was tested using the method described by Baron and Kenny. Multiple regression equations were used to analyze the data to determine if mediation occurred between the variables. Missed nursing care, the outcome variable, was regressed on the predictor variable, reminder usage, and the mediator variable impact of technology on nursing practice. The impact of healthcare information technology (IHIT) on nursing practice negatively affected missed nursing care (t = -4.12, p < .001), explaining 9.8% of variance in missed nursing care. With IHIT present, the predictor (reminder usage) was no longer significant (t = -.70, p = .48). Thus, the reduced direct association between reminder usage and missed nursing care when IHIT was in the model supported the hypothesis that IHIT was at least one of the mediators in the relationship between reminder usage and missed nursing care. The perceptions of the impact of healthcare information technology mediates the relationship between nursing care reminder use and missed nursing care. The findings are beneficial to the advancement of healthcare technology in that designers of healthcare information technology systems need to keep in mind that perceptions regarding impacts of the technology will influence usage. Many times, information technology systems are not designed to match the workflow of nurses. Systems built with redundant or impertinent reminders may be ignored. System designers must study which reminders nurses find most useful and which reminders result in the best quality outcomes. © 2015 Sigma Theta Tau International.

Propellant Chemistry for CFD Applications

NASA Technical Reports Server (NTRS)

Farmer, R. C.; Anderson, P. G.; Cheng, Gary C.

1996-01-01

Current concepts for reusable launch vehicle design have created renewed interest in the use of RP-1 fuels for high pressure and tri-propellant propulsion systems. Such designs require the use of an analytical technology that accurately accounts for the effects of real fluid properties, combustion of large hydrocarbon fuel modules, and the possibility of soot formation. These effects are inadequately treated in current computational fluid dynamic (CFD) codes used for propulsion system analyses. The objective of this investigation is to provide an accurate analytical description of hydrocarbon combustion thermodynamics and kinetics that is sufficiently computationally efficient to be a practical design tool when used with CFD codes such as the FDNS code. A rigorous description of real fluid properties for RP-1 and its combustion products will be derived from the literature and from experiments conducted in this investigation. Upon the establishment of such a description, the fluid description will be simplified by using the minimum of empiricism necessary to maintain accurate combustion analyses and including such empirical models into an appropriate CFD code. An additional benefit of this approach is that the real fluid properties analysis simplifies the introduction of the effects of droplet sprays into the combustion model. Typical species compositions of RP-1 have been identified, surrogate fuels have been established for analyses, and combustion and sooting reaction kinetics models have been developed. Methods for predicting the necessary real fluid properties have been developed and essential experiments have been designed. Verification studies are in progress, and preliminary results from these studies will be presented. The approach has been determined to be feasible, and upon its completion the required methodology for accurate performance and heat transfer CFD analyses for high pressure, tri-propellant propulsion systems will be available.

Multi-Evaporator Miniature Loop Heat Pipe for Small Spacecraft Thermal Control. Part 1; New Technologies and Validation Approach

NASA Technical Reports Server (NTRS)

Ku, Jentung; Ottenstein, Laura; Douglas, Donya; Hoang, Triem

2010-01-01

Under NASA s New Millennium Program Space Technology 8 (ST 8) Project, four experiments Thermal Loop, Dependable Microprocessor, SAILMAST, and UltraFlex - were conducted to advance the maturity of individual technologies from proof of concept to prototype demonstration in a relevant environment , i.e. from a technology readiness level (TRL) of 3 to a level of 6. This paper presents the new technologies and validation approach of the Thermal Loop experiment. The Thermal Loop is an advanced thermal control system consisting of a miniature loop heat pipe (MLHP) with multiple evaporators and multiple condensers designed for future small system applications requiring low mass, low power, and compactness. The MLHP retains all features of state-of-the-art loop heat pipes (LHPs) and offers additional advantages to enhance the functionality, performance, versatility, and reliability of the system. Details of the thermal loop concept, technical advances, benefits, objectives, level 1 requirements, and performance characteristics are described. Also included in the paper are descriptions of the test articles and mathematical modeling used for the technology validation. An MLHP breadboard was built and tested in the laboratory and thermal vacuum environments for TRL 4 and TRL 5 validations, and an MLHP proto-flight unit was built and tested in a thermal vacuum chamber for the TRL 6 validation. In addition, an analytical model was developed to simulate the steady state and transient behaviors of the MLHP during various validation tests. Capabilities and limitations of the analytical model are also addressed.

Creation of system of computer-aided design for technological objects

NASA Astrophysics Data System (ADS)

Zubkova, T. M.; Tokareva, M. A.; Sultanov, N. Z.

2018-05-01

Due to the competition in the market of process equipment, its production should be flexible, retuning to various product configurations, raw materials and productivity, depending on the current market needs. This process is not possible without CAD (computer-aided design). The formation of CAD begins with planning. Synthesizing, analyzing, evaluating, converting operations, as well as visualization and decision-making operations, can be automated. Based on formal description of the design procedures, the design route in the form of an oriented graph is constructed. The decomposition of the design process, represented by the formalized description of the design procedures, makes it possible to make an informed choice of the CAD component for the solution of the task. The object-oriented approach allows us to consider the CAD as an independent system whose properties are inherited from the components. The first step determines the range of tasks to be performed by the system, and a set of components for their implementation. The second one is the configuration of the selected components. The interaction between the selected components is carried out using the CALS standards. The chosen CAD / CAE-oriented approach allows creating a single model, which is stored in the database of the subject area. Each of the integration stages is implemented as a separate functional block. The transformation of the CAD model into the model of the internal representation is realized by the block of searching for the geometric parameters of the technological machine, in which the XML-model of the construction is obtained on the basis of the feature method from the theory of image recognition. The configuration of integrated components is divided into three consecutive steps: configuring tasks, components, interfaces. The configuration of the components is realized using the theory of "soft computations" using the Mamdani fuzzy inference algorithm.

TUNS user guide supplement: Data dictionary

NASA Technical Reports Server (NTRS)

1988-01-01

Provided is a data dictionary for the Technology Utilization Network System (TUNS) providing for each element name the long name, data type, data size, descriptive name and description, data of PRI clause, legal values, and location used.

FY 1991 RDT&E Descriptive Summaries

DTIC Science & Technology

1990-01-01

OF PROJECT : The Defense Sciences program element provides the technical foundation for long-term improvements in military equiment...DESCRIPTION OF PROJECT : Develop the fundamental technology in advanced digital structures and network concepts for smaller, more powerful, less expensive...DESCRIPTION OF PROJECT : The 1985 Defense Science Board (DSB) noted that the United States was behind and failing further behind in armor and

MULTIPOLLUTANT EMISSION CONTROL TECHNOLOGY OPTIONS FOR COAL-FIRED POWER PLANTS

EPA Science Inventory

The report presents and analyzes various existing and novel control technologies designed to achieve multipollutant [sulfur dioxide (SO2), nitrogen oxide (NOX), and mercury (Hg)] emission reductions. Summary descriptions are included of 23 multipollutant control technologies that...

Health technology assessment in Switzerland: a descriptive analysis of “Coverage with Evidence Development” decisions from 1996 to 2013

PubMed Central

Brügger, Urs; Horisberger, Bruno; Ruckstuhl, Alexander; Plessow, Rafael; Eichler, Klaus; Gratwohl, Alois

2015-01-01

Objectives To identify factors associated with the decisions of the Federal Department of Home Affairs concerning coverage with evidence development (CED) for contested novel medical technologies in Switzerland. Design Quantitative, retrospective, descriptive analysis of publicly available material and prospective, structured, qualitative interviews with key stakeholders. Setting All 152 controversial medical services decided on by the Federal Commission on Health Insurance Benefits within the framework of the new federal law on health insurance in Switzerland from 1997 to 2013, with focus on 33 technologies assigned initially to CED and 33 to evidence development without coverage. Main outcome measures Factors associated with numbers and type of contested services assigned to CED per year, the duration and final outcome of the evaluations and perceptions of key stakeholders. Results The rate of CED decisions (82 total; median 1.5/year; range 0–9/year), the time to final decision (4.5 years median; 0.75 to +11 years) and the probability of a final ‘yes’ varied over time. In logistic regression models, the change of office of the commission provided the best explanation for the observed outcomes. Good intentions but absence of scientific criteria for decisions were reported as major comments by the stakeholders. Conclusions The introduction of CED enabled access to some promising technologies early in their life cycle, and might have triggered establishment of registries and research. Impact on patients’ outcome and costs remain unknown. The primary association of institutional changes with measured end points illustrates the need for evaluation of the current health technology assessment (HTA) system. PMID:25818273

Commnity Petascale Project for Accelerator Science And Simulation: Advancing Computational Science for Future Accelerators And Accelerator Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spentzouris, Panagiotis; /Fermilab; Cary, John

The design and performance optimization of particle accelerators are essential for the success of the DOE scientific program in the next decade. Particle accelerators are very complex systems whose accurate description involves a large number of degrees of freedom and requires the inclusion of many physics processes. Building on the success of the SciDAC-1 Accelerator Science and Technology project, the SciDAC-2 Community Petascale Project for Accelerator Science and Simulation (ComPASS) is developing a comprehensive set of interoperable components for beam dynamics, electromagnetics, electron cooling, and laser/plasma acceleration modelling. ComPASS is providing accelerator scientists the tools required to enable the necessarymore » accelerator simulation paradigm shift from high-fidelity single physics process modeling (covered under SciDAC1) to high-fidelity multiphysics modeling. Our computational frameworks have been used to model the behavior of a large number of accelerators and accelerator R&D experiments, assisting both their design and performance optimization. As parallel computational applications, the ComPASS codes have been shown to make effective use of thousands of processors.« less

A survey of university students' perceptions of learning management systems in a low-resource setting using a technology acceptance model.

PubMed

Chipps, Jennifer; Kerr, Jane; Brysiewicz, Petra; Walters, Fiona

2015-02-01

Learning management systems have been widely advocated for the support of distance learning. In low-resource settings, the uptake of these systems by students has been mixed. This study aimed to identify, through the use of the Technology Acceptance Model, the individual, organizational, and technological factors that could be influencing the use of learning management systems. A simple quantitative descriptive survey was conducted of nursing and health science students at a university in South Africa as part of their first exposure to a learning management system. A total of 274 respondents (56.7%) completed the survey questionnaire, made up of 213 nursing respondents (87.7%) and 61 health sciences respondents (25%). Overall, the respondents found the learning management system easy to use and useful for learning. There were significant differences between the two groups of respondents, with the respondents from health sciences being both younger and more computer literate. The nursing respondents, who received more support and orientations, reported finding the learning management system more useful. Recommendations are made for training and support to ensure uptake.

Managing critical materials with a technology-specific stocks and flows model.

PubMed

Busch, Jonathan; Steinberger, Julia K; Dawson, David A; Purnell, Phil; Roelich, Katy

2014-01-21

The transition to low carbon infrastructure systems required to meet climate change mitigation targets will involve an unprecedented roll-out of technologies reliant upon materials not previously widespread in infrastructure. Many of these materials (including lithium and rare earth metals) are at risk of supply disruption. To ensure the future sustainability and resilience of infrastructure, circular economy policies must be crafted to manage these critical materials effectively. These policies can only be effective if supported by an understanding of the material demands of infrastructure transition and what reuse and recycling options are possible given the future availability of end-of-life stocks. This Article presents a novel, enhanced stocks and flows model for the dynamic assessment of material demands resulting from infrastructure transitions. By including a hierarchical, nested description of infrastructure technologies, their components, and the materials they contain, this model can be used to quantify the effectiveness of recovery at both a technology remanufacturing and reuse level and a material recycling level. The model's potential is demonstrated on a case study on the roll-out of electric vehicles in the UK forecast by UK Department of Energy and Climate Change scenarios. The results suggest policy action should be taken to ensure Li-ion battery recycling infrastructure is in place by 2025 and NdFeB motor magnets should be designed for reuse. This could result in a reduction in primary demand for lithium of 40% and neodymium of 70%.

When energy saving advice leads to more, rather than less, consumption

NASA Astrophysics Data System (ADS)

Revell, Kirsten M. A.; Stanton, Neville A.

2017-01-01

Energy saving technology that relies on behaviour change fails to deliver on its promise. Energy saving advice also has limited effect. This paper examines and reveals how technology and energy saving advice interacts with householders' thought processes to influence energy consumption. A case study of three households that held a 'Feedback' mental model of the home heating thermostat, as defined by Kempton [1986. 'Two Theories of Home Heat Control'. Cognitive Science 10 (1): 75-90], was undertaken to understand the driver behind differences in their home heating strategies, and the effect on energy consumption. Analysis was undertaken from five different data sources comprising: (1) boiler on durations, (2) thermostat set point adjustments, (3) self-reported strategies with home heating controls, (4) user mental model descriptions of the home heating system, and (5) Interview transcripts. The authors found that differences in user mental models of home heating at the system level explained differences in the strategies chosen at the control device level. Differences in boiler on periods were found to relate to limitations of the 'Feedback' mental model; that is, the model fails to consider the effect of the movement of warm air within the home and the impact of internal/external temperature differentials on heat loss rates. The authors argue that technology and advice should be tailored to the thought processes adopted by householders in order to promote behaviour that would realise intended energy savings.

Instructional Technology Applications in Vocational Education: A Notebook of Cases.

ERIC Educational Resources Information Center

Gooler, Dennis D.; Roth, Gene L.

This resource book is one of a series of three information resources containing ideas about instructional technology applications and how certain technology applications may have particular relevance to vocational education. It contains descriptions of some instructional technology systems applications that are currently in use. The cases focus…

The Development of Sociocultural Competence with the Help of Computer Technology

ERIC Educational Resources Information Center

Rakhimova, Alina E.; Yashina, Marianna E.; Mukhamadiarova, Albina F.; Sharipova, Astrid V.

2017-01-01

The article deals with the description of the process of development sociocultural knowledge and competences using computer technologies. On the whole the development of modern computer technologies allows teachers to broaden trainees' sociocultural outlook and trace their progress online. Observation of modern computer technologies and estimation…

75 FR 60736 - Water Technology Trade Mission to India

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... DEPARTMENT OF COMMERCE International Trade Administration Water Technology Trade Mission to India... Technology Trade Mission to India; February 28-March 4, 2011 Mission Description The United States Department... organizing a Water Technology Trade Mission to India from February 28 to March 4, 2011. The purpose of the...

Technological Metaphors and Moral Education: The Hacker Ethic and the Computational Experience

ERIC Educational Resources Information Center

Warnick, Bryan R.

2004-01-01

This essay is an attempt to understand how technological metaphors, particularly computer metaphors, are relevant to moral education. After discussing various types of technological metaphors, it is argued that technological metaphors enter moral thought through their "functional descriptions." The computer metaphor is then explored by turning to…

Critical review of membrane bioreactor models--part 1: biokinetic and filtration models.

PubMed

Naessens, W; Maere, T; Nopens, I

2012-10-01

Membrane bioreactor technology exists for a couple of decades, but has not yet overwhelmed the market due to some serious drawbacks of which operational cost due to fouling is the major contributor. Knowledge buildup and optimisation for such complex systems can significantly benefit from mathematical modelling. In this paper, the vast literature on modelling MBR biokinetics and filtration is critically reviewed. It was found that models cover the wide range of empirical to detailed mechanistic descriptions and have mainly been used for knowledge development and to a lesser extent for system optimisation/control. Moreover, studies are still predominantly performed at lab or pilot scale. Trends are discussed, knowledge gaps identified and interesting routes for further research suggested. Copyright © 2012 Elsevier Ltd. All rights reserved.

Model documentation report: Residential sector demand module of the national energy modeling system

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This report documents the objectives, analytical approach, and development of the National Energy Modeling System (NEMS) Residential Sector Demand Module. The report catalogues and describes the model assumptions, computational methodology, parameter estimation techniques, and FORTRAN source code. This reference document provides a detailed description for energy analysts, other users, and the public. The NEMS Residential Sector Demand Module is currently used for mid-term forecasting purposes and energy policy analysis over the forecast horizon of 1993 through 2020. The model generates forecasts of energy demand for the residential sector by service, fuel, and Census Division. Policy impacts resulting from new technologies,more » market incentives, and regulatory changes can be estimated using the module. 26 refs., 6 figs., 5 tabs.« less

U. S. Army Engineer Research and Development Center: Rapid Repair of Levee Breaches

DTIC Science & Technology

2011-06-01

tensile loads while allowing rigid (nonfabric) structural elements to bear the compressive loads, as shown in Figure 2.2. In Figure 2.2(a), the...Report 81000-01 2.7.3 Small-Scale Modeling Flume Tests An 80 ft long tilting flume was used to provide a simulated levee breach and flow for...somewhat peripheral to the main thrust of the DHS-SERRI funding in this project, only a cursory description of the technology and testing results will

Organization of project works in Industry 4.0 digital item designing companies

NASA Astrophysics Data System (ADS)

Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

2018-05-01

The task of the project works organization in the Industry 4.0 item designing digital factories is being studied. There is a scheme of the item designing component life cycle. There is also a scheme how to develop and confirm the quality of the item designing component documentation using the mathematical modelling. There is a description of the self-organization principles for the cyber and physical technological equipment in the Industry 4.0 «smart factory» company during the manufacturing process.

A depolarization and attenuation experiment using the CTS satellite. Volume 1: Experiment description

NASA Technical Reports Server (NTRS)

Bostian, C. W.; Holt, S. B., Jr.; Kauffman, S. R.; Manus, E. A.; Marshall, R. E.; Stutzman, W. L.; Wiley, P. H.

1976-01-01

An experiment for measuring precipitation attenuation and depolarization on the Communications Technology Satellite (CTS) 11.7 GHz downlink is described. Attenuation and depolarization of the signal received from the spacecraft is monitored on a 24 hour basis. Data is correlated with ground weather conditions. Theoretical models for millimeter wave propagation through rain are refined for maximum agreement with observed data. Techniques are developed for predicting and mimimizing the effects of rain scatter and depolarization on future satellite communication systems.

Dissecting innate immune responses with the tools of systems biology.

PubMed

Smith, Kelly D; Bolouri, Hamid

2005-02-01

Systems biology strives to derive accurate predictive descriptions of complex systems such as innate immunity. The innate immune system is essential for host defense, yet the resulting inflammatory response must be tightly regulated. Current understanding indicates that this system is controlled by complex regulatory networks, which maintain homoeostasis while accurately distinguishing pathogenic infections from harmless exposures. Recent studies have used high throughput technologies and computational techniques that presage predictive models and will be the foundation of a systems level understanding of innate immunity.

Interactive Multiple-Representation Editing of Physically-based 3D Animation

DTIC Science & Technology

1994-05-29

view similar to that of FrameMaker [46], but with a stronger model of structured editing, and a language window, which displays a formal description of...used. This is partly a result of the power of a good direct manipulation editor { most users of good editors like FrameMaker don’t seem to miss having a...re nement. In SIG- GRAPH, pages 205{212, August 1988. [46] Frame Technology Inc. Using FrameMaker , 1990. [47] Bjorn N. Freeman-Benson and John Maloney

Facilitators of and Barriers to mHealth Adoption in Older Adults With Heart Failure.

PubMed

Cajita, Maan Isabella; Hodgson, Nancy A; Lam, Katherine Wai; Yoo, Sera; Han, Hae-Ra

2018-05-04

The purpose of this descriptive, exploratory study was to assess the perceptions of older adults with heart failure regarding the use of mobile technology and to identify potential facilitators of and barriers to mHealth adoption. Semistructured interviews were used to collect data. Transcripts were analyzed using qualitative content analysis. The findings indicated that older adults do not base their intention to use mHealth solely on perceived ease of use and perceived usefulness, as outlined in the Technology Acceptance Model. The following themes emerged from the content analysis: facilitators included previous experience with mobile technology, willingness to learn mHealth, ease of use, presence of useful features, adequate training, free equipment, and doctor's recommendation; barriers included lack of knowledge regarding how to use mHealth, decreased sensory perception, lack of need for technology, poorly designed interface, cost of technology, and limited/fixed income. Overall, the findings suggest that older adults are willing to use mobile health technology, albeit with reservations. Future researchers who seek to implement mHealth-based interventions should address person-related, technology-related, and contextual barriers, and simultaneously capitalize on the influence of potential facilitators, such as a physician's recommendation, to promote mHealth adoption.

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2012 CFR

2012-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2014 CFR

2014-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2013 CFR

2013-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE... subject of research in NIST's Automated Manufacturing Research Facility (AMRF). The core of AMRF research... manufacturing technology. (b) Program objective. The objective of the NIST Manufacturing Technology Centers is...

Dynamic partial reconfiguration of logic controllers implemented in FPGAs

NASA Astrophysics Data System (ADS)

Bazydło, Grzegorz; Wiśniewski, Remigiusz

2016-09-01

Technological progress in recent years benefits in digital circuits containing millions of logic gates with the capability for reprogramming and reconfiguring. On the one hand it provides the unprecedented computational power, but on the other hand the modelled systems are becoming increasingly complex, hierarchical and concurrent. Therefore, abstract modelling supported by the Computer Aided Design tools becomes a very important task. Even the higher consumption of the basic electronic components seems to be acceptable because chip manufacturing costs tend to fall over the time. The paper presents a modelling approach for logic controllers with the use of Unified Modelling Language (UML). Thanks to the Model Driven Development approach, starting with a UML state machine model, through the construction of an intermediate Hierarchical Concurrent Finite State Machine model, a collection of Verilog files is created. The system description generated in hardware description language can be synthesized and implemented in reconfigurable devices, such as FPGAs. Modular specification of the prototyped controller permits for further dynamic partial reconfiguration of the prototyped system. The idea bases on the exchanging of the functionality of the already implemented controller without stopping of the FPGA device. It means, that a part (for example a single module) of the logic controller is replaced by other version (called context), while the rest of the system is still running. The method is illustrated by a practical example by an exemplary Home Area Network system.

Effective management of construction company in terms of linguistic communication

NASA Astrophysics Data System (ADS)

Shirina, Elena; Gaybarian, Olga; Myasischev, Georg

2017-10-01

The research presented here has been made over the years in the field of increasing the effectiveness of management in a construction company in terms of applied linguistics. The aim of this work is to share with the scientific community some practical findings of applying the technology of process management of the company, in particular the methods of linguistic efficiency considering the factors of the linguistic personality of the employee. The study deals with the description of applied linguistic and managerial models, views, practical results of their application in the applied field in order to assess production sustainability and minimize losses. The authors applied the developed technology to practical use, and the article presents the results of this application. The authors continue the research in this direction aiming at improving the production effectiveness of the proposed technologies and eliminating some identified drawback.

Barotropic Tidal Predictions and Validation in a Relocatable Modeling Environment. Revised

NASA Technical Reports Server (NTRS)

Mehra, Avichal; Passi, Ranjit; Kantha, Lakshmi; Payne, Steven; Brahmachari, Shuvobroto

1998-01-01

Under funding from the Office of Naval Research (ONR), and the Naval Oceanographic Office (NAVOCEANO), the Mississippi State University Center for Air Sea Technology (CAST) has been working on developing a Relocatable Modeling Environment(RME) to provide a uniform and unbiased infrastructure for efficiently configuring numerical models in any geographic/oceanic region. Under Naval Oceanographic Office (NAVO-CEANO) funding, the model was implemented and tested for NAVOCEANO use. With our current emphasis on ocean tidal modeling, CAST has adopted the Colorado University's numerical ocean model, known as CURReNTSS (Colorado University Rapidly Relocatable Nestable Storm Surge) Model, as the model of choice. During the RME development process, CURReNTSS has been relocated to several coastal oceanic regions, providing excellent results that demonstrate its veracity. This report documents the model validation results and provides a brief description of the Graphic user Interface (GUI).

Framework Programmable Platform for the Advanced Software Development Workstation (FPP/ASDW). Demonstration framework document. Volume 1: Concepts and activity descriptions

NASA Technical Reports Server (NTRS)

Mayer, Richard J.; Blinn, Thomas M.; Dewitte, Paul S.; Crump, John W.; Ackley, Keith A.

1992-01-01

The Framework Programmable Software Development Platform (FPP) is a project aimed at effectively combining tool and data integration mechanisms with a model of the software development process to provide an intelligent integrated software development environment. Guided by the model, this system development framework will take advantage of an integrated operating environment to automate effectively the management of the software development process so that costly mistakes during the development phase can be eliminated. The Advanced Software Development Workstation (ASDW) program is conducting research into development of advanced technologies for Computer Aided Software Engineering (CASE).

Sandia National Laboratories environmental fluid dynamics code. Marine Hydrokinetic Module User's Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Scott Carlton; Roberts, Jesse D.

2014-03-01

This document describes the marine hydrokinetic (MHK) input file and subroutines for the Sandia National Laboratories Environmental Fluid Dynamics Code (SNL-EFDC), which is a combined hydrodynamic, sediment transport, and water quality model based on the Environmental Fluid Dynamics Code (EFDC) developed by John Hamrick [1], formerly sponsored by the U.S. Environmental Protection Agency, and now maintained by Tetra Tech, Inc. SNL-EFDC has been previously enhanced with the incorporation of the SEDZLJ sediment dynamics model developed by Ziegler, Lick, and Jones [2-4]. SNL-EFDC has also been upgraded to more accurately simulate algae growth with specific application to optimizing biomass in anmore » open-channel raceway for biofuels production [5]. A detailed description of the input file containing data describing the MHK device/array is provided, along with a description of the MHK FORTRAN routine. Both a theoretical description of the MHK dynamics as incorporated into SNL-EFDC and an explanation of the source code are provided. This user manual is meant to be used in conjunction with the original EFDC [6] and sediment dynamics SNL-EFDC manuals [7]. Through this document, the authors provide information for users who wish to model the effects of an MHK device (or array of devices) on a flow system with EFDC and who also seek a clear understanding of the source code, which is available from staff in the Water Power Technologies Department at Sandia National Laboratories, Albuquerque, New Mexico.« less

SPASE 2010 - Providing Access to the Heliophysics Data Environment

NASA Astrophysics Data System (ADS)

Thieman, J. R.; King, T. A.; Roberts, D.; Spase Consortium

2010-12-01

The Heliophysics division of NASA has adopted the Space Physics Archive Search and Extract (SPASE) Data Model for use within the Heliophysics Data Environment which is composed of virtual observatories, value-added services, resident and active archives, and other data providers. The SPASE Data Model has also been adopted by Japan's Inter-university Upper atmosphere Global Observation NETwork (IUGONET), NOAA's National Geophysics Data Center (NGDC), and the Canadian Space Science Data Portal (CSSDP). Europe's HELIO project harvests information from SPASE descriptions of resources as does Planetary Plasma Interactions (PPI) Node of NASA's Planetary Data System (PDS). All of the data sets in the Heliophysics Data Environment are intended to be described by the Space Physics Archive Search and Extract (SPASE) Data Model. Many have already been described in this way. The current version of the SPASE Data Model (2.2.0) may be found on the SPASE web site at http://www.spase-group.org SPASE data set descriptions are not as difficult to create as it might seem. Help is available in both the documentation and the many tools created to support SPASE description creators. There are now a number of very experienced users who are willing to help as well. The SPASE consortium has advanced to the next step in the odyssey to achieve well coordinated federation of resource providers by designing and implementing a set of core services to facilitate the exchange of metadata and delivery of data packages. An example is the registry service shown at http://vmo.igpp.ucla.edu/registry SPASE also incorporates new technologies that are useful to the overall effort, such as cloud storage. A review of the advances, uses of the SPASE data model, and role of services in a federated environment is presented.

The Establishment of a Management Information Systems Research Center at the Naval Postgraduate School

DTIC Science & Technology

1989-09-01

Project WP 88-03 GDSS Technology in Practice: A Study D. Straub R. Beauclair WP 88-04 Interaction Analysis in GDSS Research: I. Zigurs Description of an...03 GDSS Technology in Practice: A Study (D. Straub and R. Beauclair ) 4. WP 88-04 Interaction Analysis in GDSS Research: Description of an Experience...Implementing an Information Architecture," Data Base, forthcoming. 25 Straub, D. W. and R. A. Beauclair . "A New Dimension to Decision Support

Materials processing in space program tasks-supplement

NASA Technical Reports Server (NTRS)

Pentecost, E. (Compiler)

1983-01-01

An overview of the program scope for managers and scientists in industry, university, and government communities is provided. An introductory description of the program, its history, strategy, and overall goals; identification of the organizational structures and people involved; and a description of each research task, together with a list of recent publications are included. The tasks are grouped into six categories: crystal growth; solidification of metals, alloys, and composites; fluids, transports, and chemical processes; and ultrahigh vacuum and containerless processing technologies; combustion experiments; and experimental technology.

The JPL Neptune Radiation Model (NMOD)

NASA Technical Reports Server (NTRS)

Garrett, Henry; Evans, Robin

2017-01-01

The objective of this study is the development of a comprehensive radiation model of the Neptunian environment for JPL mission planning. The ultimate goal is to provide a description of the high-energy electron and proton environments and the magnetic field at Neptune that can be used for engineering design. The JPL Neptune Radiation Model (NMOD) models the high-energy electrons and protons between 0.025 MeV and 5 MeV based on the California Institute of Technology's Cosmic Ray Subsystem and the Applied Physics Laboratory's Low Energy Charged Particle Detector on Voyager 2. As in previous JPL radiation models, the form of the Neptunian model is based on magnetic field coordinates and requires a conversion from spacecraft coordinates to Neptunian-centered magnetic "B-L" coordinates. Two types of magnetic field models have been developed for Neptune: 1) simple "offset, tilted dipoles" (OTD), and 2) a complex, multi-pole expansion model ("O8"). A review of the existing data on Neptune and a search of the NASA Planetary Data System (PDS) were completed to obtain the most current descriptions of the Neptunian high-energy particle environment. These data were fit in terms of the O8 B-L coordinates to develop the electron and proton flux models. The flux predictions of the new model were used to estimate the total ionizing dose (TID) rate along the Neptunian equator, meridional flux contours for the electrons and protons, and for flux and dose comparisons with the other radiation belts in the Solar System.

Solar thermal technology report, FY 1981. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

1982-01-01

The activities of the Department of Energy's Solar Thermal Technology Program are discussed. Highlights of technical activities and brief descriptions of each technology are given. Solar thermal conversion concepts are discussed in detail, particularily concentrating collectors and salt-gradient solar ponds.

75 FR 8316 - Office of Postsecondary Education; Overview Information; Erma Byrd Scholarship Program; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... Transmittal of Applications: March 26, 2010. Full Text of Announcement I. Funding Opportunity Description... related to industrial health and safety: Mining and mineral engineering, industrial engineering... technology/technician, hazardous materials information systems technology/technician, mining technology...

75 FR 4337 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... land exchange. The Agreement to Initiate contains information such as the description of properties...

77 FR 18202 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... the EBT environment. Description of Respondents: State, Local, or Tribal Government; Business or other...

Single-Cell Analysis Using Hyperspectral Imaging Modalities.

PubMed

Mehta, Nishir; Shaik, Shahensha; Devireddy, Ram; Gartia, Manas Ranjan

2018-02-01

Almost a decade ago, hyperspectral imaging (HSI) was employed by the NASA in satellite imaging applications such as remote sensing technology. This technology has since been extensively used in the exploration of minerals, agricultural purposes, water resources, and urban development needs. Due to recent advancements in optical re-construction and imaging, HSI can now be applied down to micro- and nanometer scales possibly allowing for exquisite control and analysis of single cell to complex biological systems. This short review provides a description of the working principle of the HSI technology and how HSI can be used to assist, substitute, and validate traditional imaging technologies. This is followed by a description of the use of HSI for biological analysis and medical diagnostics with emphasis on single-cell analysis using HSI.

Energy Utilization Technology Curriculum Materials FY 91. Illinois Plan for Industrial Technology Education.

ERIC Educational Resources Information Center

Gallo, Dennis; Welty, Kenneth

This document contains technology-based learning activities for the Illinois energy utilization technology course at the orientation level (grades 9 and 10). This packet includes a course rationale, course mission statement, course description, course outline, suggested learning objectives for each of the energy utilization areas, and suggested…

Top Level Summary of Technologies

NASA Technical Reports Server (NTRS)

Craig, Douglas, A.

2009-01-01

This document is a chart that reviews the technology of various NASA projects. Included in the chart is the title, a brief description of the technology, the funding status, a statement of the benefits, the date required, how the element connects to the Constellation project architecture, and how critical the technology is to the Constellation project.

Aerospace Flywheel Technology Development for IPACS Applications

NASA Technical Reports Server (NTRS)

McLallin, Kerry L.; Jansen, Ralph H.; Fausz, Jerry; Bauer, Robert D.

2001-01-01

The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) are cooperating under a space act agreement to sponsor the research and development of aerospace flywheel technologies to address mutual future mission needs. Flywheel technology offers significantly enhanced capability or is an enabling technology. Generally these missions are for energy storage and/or integrated power and attitude control systems (IPACS) for mid-to-large satellites in low earth orbit. These missions require significant energy storage as well as a CMG or reaction wheel function for attitude control. A summary description of the NASA and AFRL flywheel technology development programs is provided, followed by specific descriptions of the development plans for integrated flywheel system tests for IPACS applications utilizing both fixed and actuated flywheel units. These flywheel system development tests will be conducted at facilities at AFRL and NASA Glenn Research Center and include participation by industry participants Honeywell and Lockheed Martin.

'We don't even have Wi-Fi': a descriptive study exploring current use and availability of communication technologies in residential aged care.

PubMed

Moyle, Wendy; Jones, Cindy; Murfield, Jenny; Dwan, Toni; Ownsworth, Tamara

2018-02-01

There has been significant growth in communication technologies. However, it is unknown to what extent RACFs accommodate such technologies. To explore the use and availability of communication technologies for use by residents within RACFs in Queensland, Australia. A descriptive, structured telephone survey. Every 10th alphabetically listed facility from a total sample of n = 462 were telephoned and staff were invited to complete the survey. Forty-one out of a total of 93 RACFs completed the survey. The telephone was by far the primary form of communication used by residents to communicate with family and friends (n = 40; 97.6%). Conversely, the use of web-connection communication software (Skype or similar) was uncommon. The use and availability of communication technologies is limited within RACFs, highlighting a significant lag in the uptake within the sector.

A standard telemental health evaluation model: the time is now.

PubMed

Kramer, Greg M; Shore, Jay H; Mishkind, Matt C; Friedl, Karl E; Poropatich, Ronald K; Gahm, Gregory A

2012-05-01

The telehealth field has advanced historic promises to improve access, cost, and quality of care. However, the extent to which it is delivering on its promises is unclear as the scientific evidence needed to justify success is still emerging. Many have identified the need to advance the scientific knowledge base to better quantify success. One method for advancing that knowledge base is a standard telemental health evaluation model. Telemental health is defined here as the provision of mental health services using live, interactive video-teleconferencing technology. Evaluation in the telemental health field largely consists of descriptive and small pilot studies, is often defined by the individual goals of the specific programs, and is typically focused on only one outcome. The field should adopt new evaluation methods that consider the co-adaptive interaction between users (patients and providers), healthcare costs and savings, and the rapid evolution in communication technologies. Acceptance of a standard evaluation model will improve perceptions of telemental health as an established field, promote development of a sounder empirical base, promote interagency collaboration, and provide a framework for more multidisciplinary research that integrates measuring the impact of the technology and the overall healthcare aspect. We suggest that consideration of a standard model is timely given where telemental health is at in terms of its stage of scientific progress. We will broadly recommend some elements of what such a standard evaluation model might include for telemental health and suggest a way forward for adopting such a model.

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

A parallel implementation of an off-lattice individual-based model of multicellular populations

NASA Astrophysics Data System (ADS)

Harvey, Daniel G.; Fletcher, Alexander G.; Osborne, James M.; Pitt-Francis, Joe

2015-07-01

As computational models of multicellular populations include ever more detailed descriptions of biophysical and biochemical processes, the computational cost of simulating such models limits their ability to generate novel scientific hypotheses and testable predictions. While developments in microchip technology continue to increase the power of individual processors, parallel computing offers an immediate increase in available processing power. To make full use of parallel computing technology, it is necessary to develop specialised algorithms. To this end, we present a parallel algorithm for a class of off-lattice individual-based models of multicellular populations. The algorithm divides the spatial domain between computing processes and comprises communication routines that ensure the model is correctly simulated on multiple processors. The parallel algorithm is shown to accurately reproduce the results of a deterministic simulation performed using a pre-existing serial implementation. We test the scaling of computation time, memory use and load balancing as more processes are used to simulate a cell population of fixed size. We find approximate linear scaling of both speed-up and memory consumption on up to 32 processor cores. Dynamic load balancing is shown to provide speed-up for non-regular spatial distributions of cells in the case of a growing population.

Vehicle Technologies Program Educational Activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2011-12-13

Description of educational activities including: EcoCAR2: Plugging In to the Future, EcoCAR: The NeXt Challenge, Green Racing, Automotive X Prize, Graduate Technology Automotive Education (GATE), and Hydrogen Education.

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model

PubMed Central

Ehteshami, Asghar

2017-01-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don’t accept and don’t use it. Methods: This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. Results: The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Conclusion: Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible. PMID:28484289

Barcode Technology Acceptance and Utilization in Health Information Management Department at Academic Hospitals According to Technology Acceptance Model.

PubMed

Ehteshami, Asghar

2017-03-01

Nowdays, due to the increasing importance of quality care, organizations focuse on the improving provision, management and distribution of health. On one hand, incremental costs of the new technologies and on the other hand, increased knowledge of health care recipients and their expectations for high quality services have doubled the need to make changes in order to respond to resource constraints (financial, human, material). For this purpose, several technologies, such as barcode, have been used in hospitals to improve services and staff productivity; but various factors effect on the adoption of new technologies and despite good implementation of a technology and its benefits, sometimes personnel don't accept and don't use it. This is an applied descriptive cross-sectional study in which all the barcode users in health information management department of the three academic hospitals (Feiz, Al-Zahra, Ayatollah Kashani) affiliated to Isfahan University of Medical Sciences were surveyed by the barcode technology acceptance questionnaire, in six areas as following: barcode ease of learning, capabilities, perception of its usefulness and its ease of use, users attitudes towards its using, and users intention. The finding showed that barcode technology total acceptance was relatively desirable (%76.9); the most compliance with TAM model was related to the user perceptions about the ease of use of barcode technology and the least compliance was related to the ease of learning barcode technology (respectively %83.7 and %71.5). Ease of learning and barcode capability effect of usefulness and perceived ease of barcode technology. Users perceptions effect their attitudes toward greater use of technology and their attitudes have an effect on their intention to use the technology and finally, their intention makes actual use of the technology (acceptance). Therefore, considering the six elements related to technology implementation can be important in the barcode acceptance; because their chained relationship is clearly visible.

Methods for cost estimation in software project management

NASA Astrophysics Data System (ADS)

Briciu, C. V.; Filip, I.; Indries, I. I.

2016-02-01

The speed in which the processes used in software development field have changed makes it very difficult the task of forecasting the overall costs for a software project. By many researchers, this task has been considered unachievable, but there is a group of scientist for which this task can be solved using the already known mathematical methods (e.g. multiple linear regressions) and the new techniques as genetic programming and neural networks. The paper presents a solution for building a model for the cost estimation models in the software project management using genetic algorithms starting from the PROMISE datasets related COCOMO 81 model. In the first part of the paper, a summary of the major achievements in the research area of finding a model for estimating the overall project costs is presented together with the description of the existing software development process models. In the last part, a basic proposal of a mathematical model of a genetic programming is proposed including here the description of the chosen fitness function and chromosome representation. The perspective of model described it linked with the current reality of the software development considering as basis the software product life cycle and the current challenges and innovations in the software development area. Based on the author's experiences and the analysis of the existing models and product lifecycle it was concluded that estimation models should be adapted with the new technologies and emerging systems and they depend largely by the chosen software development method.

Creating and parameterizing patient-specific deep brain stimulation pathway-activation models using the hyperdirect pathway as an example.

PubMed

Gunalan, Kabilar; Chaturvedi, Ashutosh; Howell, Bryan; Duchin, Yuval; Lempka, Scott F; Patriat, Remi; Sapiro, Guillermo; Harel, Noam; McIntyre, Cameron C

2017-01-01

Deep brain stimulation (DBS) is an established clinical therapy and computational models have played an important role in advancing the technology. Patient-specific DBS models are now common tools in both academic and industrial research, as well as clinical software systems. However, the exact methodology for creating patient-specific DBS models can vary substantially and important technical details are often missing from published reports. Provide a detailed description of the assembly workflow and parameterization of a patient-specific DBS pathway-activation model (PAM) and predict the response of the hyperdirect pathway to clinical stimulation. Integration of multiple software tools (e.g. COMSOL, MATLAB, FSL, NEURON, Python) enables the creation and visualization of a DBS PAM. An example DBS PAM was developed using 7T magnetic resonance imaging data from a single unilaterally implanted patient with Parkinson's disease (PD). This detailed description implements our best computational practices and most elaborate parameterization steps, as defined from over a decade of technical evolution. Pathway recruitment curves and strength-duration relationships highlight the non-linear response of axons to changes in the DBS parameter settings. Parameterization of patient-specific DBS models can be highly detailed and constrained, thereby providing confidence in the simulation predictions, but at the expense of time demanding technical implementation steps. DBS PAMs represent new tools for investigating possible correlations between brain pathway activation patterns and clinical symptom modulation.

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 2 2011-07-01 2011-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 2 2014-07-01 2014-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 2 2013-07-01 2013-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

30 CFR 402.7 - Water-Resources Technology Development Program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 2 2012-07-01 2012-07-01 false Water-Resources Technology Development Program. 402.7 Section 402.7 Mineral Resources GEOLOGICAL SURVEY, DEPARTMENT OF THE INTERIOR WATER-RESOURCES RESEARCH PROGRAM AND THE WATER-RESOURCES TECHNOLOGY DEVELOPMENT PROGRAM Description of Water-Resources...

Multimedia Technologies. Desk Reference.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

This annotated bibliography was developed as a result of a May, 1991, Technology Seminar on Multimedia, and is intended to provide researchers with an overview of the literature pertaining to the development of multimedia technology, innovative applications, design, and implementation issues as well as with descriptions of major multimedia…

Extended experience benefits spatial mental model development with route but not survey descriptions.

PubMed

Brunyé, Tad T; Taylor, Holly A

2008-02-01

Spatial descriptions symbolically represent environmental information through language and are written in two primary perspectives: survey, analogous to viewing a map, and route, analogous to navigation. Readers of survey or route descriptions form abstracted perspective flexible representations of the described environment, or spatial mental models. The present two experiments investigated the maintenance of perspective in spatial mental models as a function of description perspective and experience (operationalized through repetition), and as reflected in self-paced reading times. Experiment 1 involved studying survey and route descriptions either once or three times, then completing map drawing and true/false statement verification. Results demonstrated that spatial mental models are readily formed with survey descriptions, but require relatively more experience with route descriptions; further, some limited evidence suggests perspective dependence in spatial mental models, even following extended experience. Experiment 2 measured self-paced reading during three successive description presentations. Average reading times over the three presentations reduced more for survey relative to route descriptions, and there was no evidence for perspective specificity in resulting spatial mental models. This supports Experiment 1 findings demonstrating the relatively time-consuming nature of acquiring spatial mental models from route, but not survey descriptions. Results are discussed with regard to developmental, discourse processing, and spatial mental model theory.

Teaching Einsteinian physics at schools: part 1, models and analogies for relativity

NASA Astrophysics Data System (ADS)

Kaur, Tejinder; Blair, David; Moschilla, John; Stannard, Warren; Zadnik, Marjan

2017-11-01

The Einstein-First project aims to change the paradigm of school science teaching through the introduction of modern Einsteinian concepts of space and time, gravity and quanta at an early age. These concepts are rarely taught to school students despite their central importance to modern science and technology. The key to implementing the Einstein-First curriculum is the development of appropriate models and analogies. This paper is the first part of a three-paper series. It presents the conceptual foundation of our approach, based on simple physical models and analogies, followed by a detailed description of the models and analogies used to teach concepts of general and special relativity. Two accompanying papers address the teaching of quantum physics (Part 2) and research outcomes (Part 3).

Impact of Information and Communication Technology on Information Seeking Behavior of Users in Astronomy and Astrophysics Centers of India: A Survey

NASA Astrophysics Data System (ADS)

Sahu, H. K.; Singh, S. N.

2010-10-01

This study is based on a survey designed to determine the Information Seeking Behavior (ISB) of Astronomy and Astrophysics users in India. The main objective of the study is to determine the sources consulted and the general pattern of the information-gathering system of users and the impact of Information and Communication Technology (ICT) on the Astronomy and Astrophysics user's Information Seeking Behavior. It examines various Information and Communication Technology-based resources and methods of access and use. A descriptive sample stratified method has been used and data was collected using a questionnaire as the main tool. The response rate was 72%. Descriptive statistics were also employed and data have been presented in tables and graphs. The study is supported by earlier studies. It shows that Astronomy and Astrophysics users have developed a unique Information Seeking Behavior to carry out their education and research. The vast majority of respondents reported that more information is available from a variety of e-resources. Consequently, they are able to devote more time to seek out relevant information in the current Information and Communication Technology scenario. The study also indicates that respondents use a variety of information resources including e-resources for teaching and research. Books and online databases such as the NASA Astrophysics Data System (ADS) were considered more important as formal sources of information. E-mail and face-to-face communications are used extensively by users as informal sources of information. It also reveals that despite the presence of electronic sources, Astronomy and Astrophysics users are still using printed materials. This study should to help to improve various Information and Communication Technology-based services. It also suggests that GOI should adopt Information and Communication Technology-based Information Centers and Libraries services and recommends a network-based model for Astronomy and Astrophysics users.

Airborne instruments to measure atmospheric aerosol particles, clouds and radiation: A cook's tour of mature and emerging technology

NASA Astrophysics Data System (ADS)

Baumgardner, D.; Brenguier, J. L.; Bucholtz, A.; Coe, H.; DeMott, P.; Garrett, T. J.; Gayet, J. F.; Hermann, M.; Heymsfield, A.; Korolev, A.; Krämer, M.; Petzold, A.; Strapp, W.; Pilewskie, P.; Taylor, J.; Twohy, C.; Wendisch, M.; Bachalo, W.; Chuang, P.

2011-10-01

An overview is presented of airborne systems for in situ measurements of aerosol particles, clouds and radiation that are currently in use on research aircraft around the world. Description of the technology is at a level sufficient for introducing the basic principles of operation and an extensive list of references for further reading is given. A number of newer instruments that implement emerging technology are described and the review concludes with a description of some of the most important measurement challenges that remain. This overview is a synthesis of material from a reference book that is currently in preparation and that will be published in 2012 by Wiley.

PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

DOE Office of Scientific and Technical Information (OSTI.GOV)

MAY TH

The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revisionmore » includes information on additional feed tanks.« less

White Gaussian Noise - Models for Engineers

NASA Astrophysics Data System (ADS)

Jondral, Friedrich K.

2018-04-01

This paper assembles some information about white Gaussian noise (WGN) and its applications. It starts from a description of thermal noise, i. e. the irregular motion of free charge carriers in electronic devices. In a second step, mathematical models of WGN processes and their most important parameters, especially autocorrelation functions and power spectrum densities, are introduced. In order to proceed from mathematical models to simulations, we discuss the generation of normally distributed random numbers. The signal-to-noise ratio as the most important quality measure used in communications, control or measurement technology is accurately introduced. As a practical application of WGN, the transmission of quadrature amplitude modulated (QAM) signals over additive WGN channels together with the optimum maximum likelihood (ML) detector is considered in a demonstrative and intuitive way.

Modeling using discrete event simulation: a report of the ISPOR-SMDM Modeling Good Research Practices Task Force--4.

PubMed

Karnon, Jonathan; Stahl, James; Brennan, Alan; Caro, J Jaime; Mar, Javier; Möller, Jörgen

2012-01-01

Discrete event simulation (DES) is a form of computer-based modeling that provides an intuitive and flexible approach to representing complex systems. It has been used in a wide range of health care applications. Most early applications involved analyses of systems with constrained resources, where the general aim was to improve the organization of delivered services. More recently, DES has increasingly been applied to evaluate specific technologies in the context of health technology assessment. The aim of this article was to provide consensus-based guidelines on the application of DES in a health care setting, covering the range of issues to which DES can be applied. The article works through the different stages of the modeling process: structural development, parameter estimation, model implementation, model analysis, and representation and reporting. For each stage, a brief description is provided, followed by consideration of issues that are of particular relevance to the application of DES in a health care setting. Each section contains a number of best practice recommendations that were iterated among the authors, as well as among the wider modeling task force. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Coupled Climate-Economy-Biosphere (CoCEB) model - Part 2: Deforestation control and investment in carbon capture and storage technologies

NASA Astrophysics Data System (ADS)

Ogutu, K. B. Z.; D'Andrea, F.; Ghil, M.; Nyandwi, C.; Manene, M. M.; Muthama, J. N.

2015-04-01

This study uses the global climate-economy-biosphere (CoCEB) model developed in Part 1 to investigate economic aspects of deforestation control and carbon sequestration in forests, as well as the efficiency of carbon capture and storage (CCS) technologies as policy measures for climate change mitigation. We assume - as in Part 1 - that replacement of one technology with another occurs in terms of a logistic law, so that the same law also governs the dynamics of reduction in carbon dioxide emission using CCS technologies. In order to take into account the effect of deforestation control, a slightly more complex description of the carbon cycle than in Part 1 is needed. Consequently, we add a biomass equation into the CoCEB model and analyze the ensuing feedbacks and their effects on per capita gross domestic product (GDP) growth. Integrating biomass into the CoCEB and applying deforestation control as well as CCS technologies has the following results: (i) low investment in CCS contributes to reducing industrial carbon emissions and to increasing GDP, but further investment leads to a smaller reduction in emissions, as well as in the incremental GDP growth; and (ii) enhanced deforestation control contributes to a reduction in both deforestation emissions and in atmospheric carbon dioxide concentration, thus reducing the impacts of climate change and contributing to a slight appreciation of GDP growth. This effect is however very small compared to that of low-carbon technologies or CCS. We also find that the result in (i) is very sensitive to the formulation of CCS costs, while to the contrary, the results for deforestation control are less sensitive.

Fuel and vehicle technology choices for passenger vehicles in achieving stringent CO2 targets: connections between transportation and other energy sectors.

PubMed

Grahn, M; Azar, C; Williander, M I; Anderson, J E; Mueller, S A; Wallington, T J

2009-05-01

The regionalized Global Energy Transition (GET-R 6.0) model has been modified to include a detailed description of light-duty vehicle options and used to investigate the potential impact of carbon capture and storage (CCS) and concentrating solar power (CSP) on cost-effective fuel/vehicle technologies in a carbon-constrained world. Total CO2 emissions were constrained to achieve stabilization at 400-550 ppm, by 2100, at lowesttotal system cost The dominantfuel/vehicle technologies varied significantly depending on CO2 constraint future cost of vehicle technologies, and availability of CCS and CSP. For many cases, no one technology dominated on a global scale. CCS provides relatively inexpensive low-CO2 electricity and heatwhich prolongs the use of traditional ICEVs. CSP displaces fossil fuel derived electricity, prolongs the use of traditional ICEVs, and promotes electrification of passenger vehicles. In all cases considered, CCS and CSP availability had a major impact on the lowest cost fuel/vehicle technologies, and alternative fuels are needed in response to expected dwindling oil and natural gas supply potential by the end of the century.

Research and technology of the Langley Research Center

NASA Technical Reports Server (NTRS)

1980-01-01

Descriptions of the research and technology activities at the Langley Research Center are given. Topics include laser development, aircraft design, aircraft engines, aerodynamics, remote sensing, space transportation systems, and composite materials.

Hybrid modeling for quality by design and PAT-benefits and challenges of applications in biopharmaceutical industry.

PubMed

von Stosch, Moritz; Davy, Steven; Francois, Kjell; Galvanauskas, Vytautas; Hamelink, Jan-Martijn; Luebbert, Andreas; Mayer, Martin; Oliveira, Rui; O'Kennedy, Ronan; Rice, Paul; Glassey, Jarka

2014-06-01

This report highlights the drivers, challenges, and enablers of the hybrid modeling applications in biopharmaceutical industry. It is a summary of an expert panel discussion of European academics and industrialists with relevant scientific and engineering backgrounds. Hybrid modeling is viewed in its broader sense, namely as the integration of different knowledge sources in form of parametric and nonparametric models into a hybrid semi-parametric model, for instance the integration of fundamental and data-driven models. A brief description of the current state-of-the-art and industrial uptake of the methodology is provided. The report concludes with a number of recommendations to facilitate further developments and a wider industrial application of this modeling approach. These recommendations are limited to further exploiting the benefits of this methodology within process analytical technology (PAT) applications in biopharmaceutical industry. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Aeroelastic Modeling of X-56A Stiff-Wing Configuration Flight Test Data

NASA Technical Reports Server (NTRS)

Grauer, Jared A.; Boucher, Matthew J.

2017-01-01

Aeroelastic stability and control derivatives for the X-56A Multi-Utility Technology Testbed (MUTT), in the stiff-wing configuration, were estimated from flight test data using the output-error method. Practical aspects of the analysis are discussed. The orthogonal phase-optimized multisine inputs provided excellent data information for aeroelastic modeling. Consistent parameter estimates were determined using output error in both the frequency and time domains. The frequency domain analysis converged faster and was less sensitive to starting values for the model parameters, which was useful for determining the aeroelastic model structure and obtaining starting values for the time domain analysis. Including a modal description of the structure from a finite element model reduced the complexity of the estimation problem and improved the modeling results. Effects of reducing the model order on the short period stability and control derivatives were investigated.

What drives technology-based distractions? A structural equation model on social-psychological factors of technology-based driver distraction engagement.

PubMed

Chen, Huei-Yen Winnie; Donmez, Birsen

2016-06-01

With the proliferation of new mobile and in-vehicle technologies, understanding the motivations behind a driver's voluntary engagement with such technologies is crucial from a safety perspective, yet is complex. Previous literature either surveyed a large number of distractions that may be diverse, or too focuses on one particular activity, such as cell phone use. Further, earlier studies about social-psychological factors underlying driver distraction tend to focus on one or two factors in-depth, and those that examine a more comprehensive set of factors are often limited in their analyses methods. The present work considers a wide array of social-psychological factors within a structural equation model to predict their influence on a focused set of technology-based distractions. A better understanding of these facilitators can enhance the design of distraction mitigation strategies. We analysed survey responses about three technology-based driver distractions: holding phone conversations, manually interacting with cell phones, and adjusting the settings of in-vehicle technology, as well as responses on five social-psychological factors: attitude, descriptive norm, injunctive norm, technology inclination, and a risk/sensation seeking personality. Using data collected from 525 drivers (ages: 18-80), a structural equation model was built to analyse these social-psychological factors as latent variables influencing self-reported engagement in these three technology-based distractions. Self-reported engagement in technology-based distractions was found to be largely influenced by attitudes about the distractions. Personality and social norms also played a significant role, but technology inclination did not. A closer look at two age groups (18-30 and 30+) showed that the effect of social norms, especially of injunctive norm (i.e., perceived approvals), was less prominent in the 30+ age group, while personality remained a significant predictor for the 30+ age group but marginally significant for the younger group. Findings from this work provide insights into the social-psychological factors behind intentional engagement in technology-based distractions and in particular suggesting that these factors may be sensitive to demographic differences. Copyright © 2016. Published by Elsevier Ltd.

Examination of Assessment Practices for Engineering Design Projects in Secondary Technology Education (Second Article in 3-Part Series)

ERIC Educational Resources Information Center

Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

Based on the efforts to infuse engineering practices within the technology education curriculum it is appropriate to now investigate how technology education teachers are assessing engineering design activities within their classrooms. This descriptive study drew a full sample of high school technology teachers from the current International…

The Impact of Bar Code Medication Administration Technology on Reported Medication Errors

ERIC Educational Resources Information Center

Holecek, Andrea

2011-01-01

The use of bar-code medication administration technology is on the rise in acute care facilities in the United States. The technology is purported to decrease medication errors that occur at the point of administration. How significantly this technology affects actual rate and severity of error is unknown. This descriptive, longitudinal research…

District nurses' conceptions of medical technology in palliative homecare.

PubMed

Munck, Berit; Fridlund, Bengt; Mårtensson, Jan

2011-10-01

The aim of this study was to describe district nurses' conceptions of medical technology in palliative homecare. Medical technology has, in recent years, been widely used in palliative homecare. Personnel with varying degrees of training and knowledge must be able to handle the new technology. A descriptive design with a phenomenographic approach was chosen to describe qualitatively different conceptions of the phenomenon medical technology. Interviews with 16 district nurses working with palliative homecare were analysed and five descriptive categories emerged. Medical technology in palliative homecare led to vulnerability because of increasing demands and changing tasks. When medical technology was used in the home it demanded collaboration between all involved actors. It also demanded self-reliance and an awareness of managing medical technology in a patient-safe way. Medical technology provided freedom for the palliative patients. To maintain patient safety, more education and collaboration with palliative care teams is needed. Next-of-kin are considered as an important resource but their participation must be based on their own conditions. District nurses need regular training on medical devices, must be more specialized in this kind of care and must not fragment their working time within other specialities. © 2011 Blackwell Publishing Ltd.

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

TESOL Technology Standards: Description, Implementation, Integration

ERIC Educational Resources Information Center

Teachers of English to Speakers of Other Languages, Inc. (TESOL), 2011

2011-01-01

The "TESOL Technology Standards" are applicable in a wide range of contexts: foreign language, second language, child, teen, adult, higher education, vocational education, language for specific purposes, and fully online programs; and in settings with low, medium, or high resources and access to communication technologies. Students, teachers,…

Integrating Engineering Design into Technology Education: Georgia's Perspective

ERIC Educational Resources Information Center

Denson, Cameron D.; Kelley, Todd R.; Wicklein, Robert C.

2009-01-01

This descriptive research study reported on Georgia's secondary level (grades 6-12) technology education programs capability to incorporate engineering concepts and/or engineering design into their curriculum. Participants were middle school and high school teachers in the state of Georgia who currently teach technology education. Participants…

Preservice Teachers' TPACK: Using Technology to Support Inquiry Instruction

ERIC Educational Resources Information Center

Maeng, Jennifer L.; Mulvey, Bridget K.; Smetana, Lara K.; Bell, Randy L.

2013-01-01

This investigation provides detailed descriptions of preservice secondary science teachers' technology-enhanced inquiry instruction and their developing TPACK. Prior to student teaching, 27 preservice teachers were introduced to general guidelines for integrating technology to support reform-based science instruction. This instruction was in…

Educational Technology and Distance Supervision in Counselor Education

ERIC Educational Resources Information Center

Carlisle, Robert Milton; Hays, Danica G.; Pribesh, Shana L.; Wood, Chris T.

2017-01-01

The authors used a nonexperimental descriptive design to examine the prevalence of distance supervision in counselor education programs, educational technology used in supervision, training on technology in supervision, and participants' (N = 673) perceptions of legal and ethical compliance. Program policies are recommended to guide the training…

P-Care BPJS Acceptance Model in Primary Health Centers.

PubMed

Markam, Hosizah

2017-01-01

Electronic Medical Records (EMR) are increasingly adopted in healthcare facilities. Recently, implementation failure of electronic information systems is known to be caused by not only the quality of technical aspects, but also the user's behavior. It is known as applying the Technology Acceptance Model (TAM). This research aimed to analyze the acceptance model of p-care BPJS in the primary health centers. A total sample of 30 p-care BPJS users was drawn by multistage random sampling in which of these 30 primary health centers participated. Data analysis used both descriptive and inferential statistics. In the phase of structural model, it indicated that p-care BPJS acceptance model in the primary health centers was formed by Perceived Ease of Use (PEOU) and Perceived Usefulness (PU) through Attitude towards use of p-care BPJS and Behavioral Intention to use p-care BPJS.

ATLAS from Data Research Associates: A Fully Integrated Automation System.

ERIC Educational Resources Information Center

Mellinger, Michael J.

1987-01-01

This detailed description of a fully integrated, turnkey library system includes a complete profile of the system (functions, operational characteristics, hardware, operating system, minimum memory and pricing); history of the technologies involved; and descriptions of customer services and availability. (CLB)

Crop identification technology assessment for remote sensing. (CITARS) Volume 9: Statistical analysis of results

NASA Technical Reports Server (NTRS)

Davis, B. J.; Feiveson, A. H.

1975-01-01

Results are presented of CITARS data processing in raw form. Tables of descriptive statistics are given along with descriptions and results of inferential analyses. The inferential results are organized by questions which CITARS was designed to answer.

The Nature of Exhibits About Acoustics in Science and Technology Centres

NASA Astrophysics Data System (ADS)

Afonso, Ana S.; Gilbert, John K.

2008-11-01

This is a study of the opportunities currently provided by interactive science and technology centres for visitors’ engagement in the field of acoustics. E-mails, requesting a description of exhibits on acoustics (sound and hearing) in use, were sent to members of staff of interactive science and technology centres around the world as well as to companies that design and sell exhibits. Eighty-seven descriptions of distinctive interactive exhibits were received and analysed. Results show that: there are few analogy-based exhibits concerning the more complex aspects of acoustics; narratives involving visitors’ everyday lives, that might provide continuity between and beyond the situations presented by exhibits, are not generally provided; science is emphasised at the expense of technology; the risks, benefits and ethical implications of relevant technological artefacts are rarely mentioned; the majority of the exhibits are concerned with the fields of fundamental acoustics, hearing, and psychoacoustics. It is suggested that interactive science and technology centres need to rethink the design of exhibits about acoustics if their mission includes some appreciation of this important branch of science and technology.

Resources and Information for Parents about Braille

MedlinePlus

... Vision Loss Eye Conditions Losing Your Sight? Using Technology For Parents of Blind Children For Job Seekers For Seniors Braille Video Description Programs & Services Technology Evaluation Center on Vision Loss Learning Center Professional ...

48 CFR 970.5227-2 - Rights in data-technology transfer.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Research and Development Agreement (CRADA) information in accordance with Technology Transfer actions under... descriptive of the data and is suitable for dissemination purposes, (B) The program under which it was funded...

48 CFR 970.5227-2 - Rights in data-technology transfer.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Research and Development Agreement (CRADA) information in accordance with Technology Transfer actions under... descriptive of the data and is suitable for dissemination purposes, (B) The program under which it was funded...

48 CFR 970.5227-2 - Rights in data-technology transfer.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Research and Development Agreement (CRADA) information in accordance with Technology Transfer actions under... descriptive of the data and is suitable for dissemination purposes, (B) The program under which it was funded...

48 CFR 970.5227-2 - Rights in data-technology transfer.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Research and Development Agreement (CRADA) information in accordance with Technology Transfer actions under... descriptive of the data and is suitable for dissemination purposes, (B) The program under which it was funded...

NASA commercial technology. Agenda for change

NASA Technical Reports Server (NTRS)

1994-01-01

The essence of NASA's new way of doing business to support the agency's commercial technology mission objectives is described. A summary description of the various changes needed to successfully perform this mission is provided.

A Digital Photographic Measurement Method for Quantifying Foot Posture: Validity, Reliability, and Descriptive Data

PubMed Central

Cobb, Stephen C.; James, C. Roger; Hjertstedt, Matthew; Kruk, James

2011-01-01

Abstract Context: Although abnormal foot posture long has been associated with lower extremity injury risk, the evidence is equivocal. Poor intertester reliability of traditional foot measures might contribute to the inconsistency. Objectives: To investigate the validity and reliability of a digital photographic measurement method (DPMM) technology, the reliability of DPMM-quantified foot measures, and the concurrent validity of the DPMM with clinical-measurement methods (CMMs) and to report descriptive data for DPMM measures with moderate to high intratester and intertester reliability. Design: Descriptive laboratory study. Setting: Biomechanics research laboratory. Patients or Other Participants: A total of 159 people participated in 3 groups. Twenty-eight people (11 men, 17 women; age  =  25 ± 5 years, height  =  1.71 ± 0.10 m, mass  =  77.6 ± 17.3 kg) were recruited for investigation of intratester and intertester reliability of the DPMM technology; 20 (10 men, 10 women; age  =  24 ± 2 years, height  =  1.71 ± 0.09 m, mass  =  76 ± 16 kg) for investigation of DPMM and CMM reliability and concurrent validity; and 111 (42 men, 69 women; age  =  22.8 ± 4.7 years, height  =  168.5 ± 10.4 cm, mass  =  69.8 ± 13.3 kg) for development of a descriptive data set of the DPMM foot measurements with moderate to high intratester and intertester reliabilities. Intervention(s): The dimensions of 10 model rectangles and the 28 participants' feet were measured, and DPMM foot posture was measured in the 111 participants. Two clinicians assessed the DPMM and CMM foot measures of the 20 participants. Main Outcome Measure(s): Validity and reliability were evaluated using mean absolute and percentage errors and intraclass correlation coefficients. Descriptive data were computed from the DPMM foot posture measures. Results: The DPMM technology intratester and intertester reliability intraclass correlation coefficients were 1.0 for each tester and variable. Mean absolute errors were equal to or less than 0.2 mm for the bottom and right-side variables and 0.1° for the calculated angle variable. Mean percentage errors between the DPMM and criterion reference values were equal to or less than 0.4%. Intratester and intertester reliabilities of DPMM-computed structural measures of arch and navicular indices were moderate to high (>0.78), and concurrent validity was moderate to strong. Conclusions: The DPMM is a valid and reliable clinical and research tool for quantifying foot structure. The DPMM and the descriptive data might be used to define groups in future studies in which the relationship between foot posture and function or injury risk is investigated. PMID:21214347

Ontology patterns for complex topographic feature yypes

USGS Publications Warehouse

Varanka, Dalia E.

2011-01-01

Complex feature types are defined as integrated relations between basic features for a shared meaning or concept. The shared semantic concept is difficult to define in commonly used geographic information systems (GIS) and remote sensing technologies. The role of spatial relations between complex feature parts was recognized in early GIS literature, but had limited representation in the feature or coverage data models of GIS. Spatial relations are more explicitly specified in semantic technology. In this paper, semantics for topographic feature ontology design patterns (ODP) are developed as data models for the representation of complex features. In the context of topographic processes, component assemblages are supported by resource systems and are found on local landscapes. The topographic ontology is organized across six thematic modules that can account for basic feature types, resource systems, and landscape types. Types of complex feature attributes include location, generative processes and physical description. Node/edge networks model standard spatial relations and relations specific to topographic science to represent complex features. To demonstrate these concepts, data from The National Map of the U. S. Geological Survey was converted and assembled into ODP.

Computational investigations of streamers in a single bubble suspended in distilled water under atmospheric pressure conditions

NASA Astrophysics Data System (ADS)

Sharma, Ashish; Levko, Dmitry; Raja, Laxminarayan

2016-09-01

We present a computational model of nanosecond streamers generated in helium bubbles immersed in distilled water at the atmospheric pressure conditions. The model is based on the self-consistent, multispecies and the continuum description of plasma and takes into account the presence of water vapor in the gas bubble for a more accurate description of the kinetics of the discharge. We find that the dynamic characteristics of the streamer discharge are completely different at low and high over voltages. We observe that the polarity of the trigger voltage has a substantial effect on initiation, transition and evolution stages of streamers with the volumetric distribution of species in the streamer channel much more uniform for negative trigger voltages due to the presence of multiple streamers. We also find that the presence of water vapor significantly influences the distribution of the dominant species in the streamer trail and has a profound effect on the flux of the dominant species to the bubble wall. The research reported in this publication was supported by Competitive Research Funding from King Abdullah University of Science and Technology (KAUST).

NASA's Microgravity Technology Report, 1996: Summary of Activities

NASA Technical Reports Server (NTRS)

Kierk, Isabella

1996-01-01

This report covers technology development and technology transfer activities within the Microgravity Science Research Programs during FY 1996. It also describes the recent major tasks under the Advanced Technology Development (ATD) Program and identifies current technology requirements. This document is consistent with NASA,s Enteprise for the Human Exploration and development of Space (HEDS) Strategic Plan. This annual update reflects changes in the Microgravity Science Research Program's new technology activities and requirements. Appendix A. FY 1996 Advanced Technology Development. Program and Project Descriptions. Appendix B. Technology Development.

Research and technology, Lyndon B. Johnson Space Center

NASA Technical Reports Server (NTRS)

1984-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1984 are highlighted. Included are research funded by the Office of Aeronautics and Space Technology; Advanced Programs tasks funded by the Office of Space Flight; and Solar System Exploration and Life Sciences research funded by the Office of Space Sciences and Applications. Summary sections describing the role of the Johnson Space Center in each program are followed by one page descriptions of significant projects. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Research and technology of the Lyndon B. Johnson Space Center

NASA Technical Reports Server (NTRS)

1988-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1987 are highlighted. Included are research projects funded by the Office of Aeronautics and Space Technology, Solar System Exploration and Life Sciences research funded by the Office of Space Sciences and Applications, and advanced Programs tasks funded by the Office of Space Flight. Summary sections describing the role of the Johnson Space Center in each program are followed by descriptions of significant projects. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Extension Youth Educators' Technology Use in Youth Development Programming

ERIC Educational Resources Information Center

McClure, Carli; Buquoi, Brittany; Kotrlik, Joe W.; Machtmes, Krisanna; Bunch, J. C.

2014-01-01

The purpose of this descriptive-correlational study was to determine the use of technology in youth programming by Extension youth development educators in Louisiana, Mississippi, and Tennessee. Data were collected via e-mail and a SurveyMonkey© questionnaire. Extension educators are using some technology in youth development programming. More…

Test devices for aeronautical research and technology

NASA Technical Reports Server (NTRS)

1985-01-01

The objectives of the DFVLR in six areas are described: (1) transportation and communication systems; (2) aircraft, space technology, (4) remote sensing, (5) energy and propulsion technology; and (6) research and development. A detailed description of testing devices and other facilities required to carry out the research program is given.

The application of various digital subscriber line (xDSL) technologies to ITS : traffic video laboratory assessments

DOT National Transportation Integrated Search

1999-02-01

This paper focuses on various digital subscriber line (xDSL) technologies and their potential application to Intelligent Transportation Systems (ITS). A summary of some of the features of xDSL technologies is given, followed by a description of a suc...

Study Programmes for Engineers from Developing Countries at the Norwegian Institute of Technology.

ERIC Educational Resources Information Center

Lasson, Axel; Hermansen, John

1989-01-01

Describes the background of the study and fellowship programs for graduates from the developing countries at the Norwegian Institute of Technology. Discusses some experiences with the programs. Includes a brief description of five courses: (1) "Pulp and Paper Technology"; (2) "Marine Civil Engineering"; (3) "Hydropower…

Uses of Technology to Support Reflective Teaching Practices

ERIC Educational Resources Information Center

Brent, Wayne

2010-01-01

This dissertation researched and reported on how technology was used to facilitate and inform reflective teaching practices. It also identified the characteristics of benefits and barriers in using technology for teaching and reflection. The study, descriptive in nature, was designed to determine the reflective practices of instructors and how…

Teaching Geometry in the 21st Century: Investigating Teachers' Technological Pedagogical Content Knowledge Levels

ERIC Educational Resources Information Center

Tatar, Enver; Aldemir, Ruhsen; Niess, Margaret L.

2018-01-01

This qualitative case study investigated teachers' Technological Pedagogical Content Knowledge (TPACK) for teaching high school geometry in Turkey. Four TPACK components and their corresponding five TPACK level descriptions were used for examining three geometry teachers' TPACK through their technological instructional plans, microteaching…

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer.

PubMed

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler's value model for the consumer. In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations.

Factors influencing nurses' acceptance of hospital information systems in Iran: application of the Unified Theory of Acceptance and Use of Technology.

PubMed

Sharifian, Roxana; Askarian, Fatemeh; Nematolahi, Mohtaram; Farhadi, Payam

User acceptance is a precondition for successful implementation of hospital information systems (HISs). Increasing investment in information technology by healthcare organisations internationally has made user acceptance an important issue in technology implementation and management. Despite the increased focus on hospital information systems, there continues to be user resistance. The present study aimed to investigate the factors affecting hospital information systems nurse-user acceptance of HISs, based on the Unified Theory of Acceptance and Use of Technology (UTAUT), in the Shiraz University of Medical Sciences teaching hospitals. A descriptive-analytical research design was employed to study nurses' adoption and use of HISs. Data collection was undertaken using a cross-sectional survey of nurses (n=303). The research model was examined using the LISREL path confirmatory modeling. The results demonstrated that the nurses' behavioural intention (BI) to use hospital information systems was predicted by Performance Expectancy (PE) (β= 2.34, p<0.01), Effort Expectancy (EE) (β= 2.21, p<0.01), Social Influence (SI) (β= 2.63, p<0.01) and Facilitating Conditions (FC) (β= 2.84, p<0.01). The effects of these antecedents of BI explained 72.8% of the variance in nurses' intention to use hospital information systems (R2 = 0.728). Application of the research model suggested that nurses' acceptance of HISs was influenced by performance expectancy, effort expectancy, social influence and facilitating conditions, with performance expectancy having the strongest effect on user intention.

Managing Critical Materials with a Technology-Specific Stocks and Flows Model

PubMed Central

2013-01-01

The transition to low carbon infrastructure systems required to meet climate change mitigation targets will involve an unprecedented roll-out of technologies reliant upon materials not previously widespread in infrastructure. Many of these materials (including lithium and rare earth metals) are at risk of supply disruption. To ensure the future sustainability and resilience of infrastructure, circular economy policies must be crafted to manage these critical materials effectively. These policies can only be effective if supported by an understanding of the material demands of infrastructure transition and what reuse and recycling options are possible given the future availability of end-of-life stocks. This Article presents a novel, enhanced stocks and flows model for the dynamic assessment of material demands resulting from infrastructure transitions. By including a hierarchical, nested description of infrastructure technologies, their components, and the materials they contain, this model can be used to quantify the effectiveness of recovery at both a technology remanufacturing and reuse level and a material recycling level. The model’s potential is demonstrated on a case study on the roll-out of electric vehicles in the UK forecast by UK Department of Energy and Climate Change scenarios. The results suggest policy action should be taken to ensure Li-ion battery recycling infrastructure is in place by 2025 and NdFeB motor magnets should be designed for reuse. This could result in a reduction in primary demand for lithium of 40% and neodymium of 70%. PMID:24328245

Standardized UXO Technology Demonstration Site Scoring Record No. 946

DTIC Science & Technology

2017-07-01

VA 22350 U.S. Army Test and Evaluation Command Aberdeen Proving Ground, MD 21005-5001 Distribution Unlimited, July 2017. The use of a...Address . . . . . . . . . . . . . . . 4 2.1.2 System Description ...4 2.1.3 Data Processing Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.1.4 Data Submission

Harwell high pressure heat transfer loop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, A.W.; Keeys, R.K.F.

1967-12-15

A detailed description is presented of the Harwell (Chemical Engineering and Process Technology Division) high pressure, steam-water heat transfer loop; this description is aimed at supplementing the information given in reports on individual experiments. The operating instructions for the loop are given in an appendix. (auth)

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2013 CFR

2013-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2012 CFR

2012-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2014 CFR

2014-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

15 CFR 270.1 - Description of rule; purpose; applicability.

Code of Federal Regulations, 2011 CFR

2011-01-01

... NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NATIONAL CONSTRUCTION SAFETY TEAMS NATIONAL CONSTRUCTION SAFETY TEAMS General § 270.1 Description of rule; purpose; applicability. (a) The National Construction Safety Team Act (the Act) (Pub. L. 107-231) provides for the establishment of...

Railroad Classification Yard Technology Manual: Volume II : Yard Computer Systems

DOT National Transportation Integrated Search

1981-08-01

This volume (Volume II) of the Railroad Classification Yard Technology Manual documents the railroad classification yard computer systems methodology. The subjects covered are: functional description of process control and inventory computer systems,...

Find Services for People Who Are Blind or Visually Impaired

MedlinePlus

... Vision Loss Eye Conditions Losing Your Sight? Using Technology For Parents of Blind Children For Job Seekers For Seniors Braille Video Description Programs & Services Technology Evaluation Center on Vision Loss Learning Center Professional ...

ENGINEERING BULLETIN: SUPERCRITICAL WATER OXIDATION

EPA Science Inventory

This engineering bulletin presents a description and status of supercritical water oxidation technology, a summary of recent performance tests, and the current applicability of this emerging technology. This information is provided to assist remedial project managers, contractors...

Educational Technology in Argentina.

ERIC Educational Resources Information Center

Ronchi, Robert

1980-01-01

This description of the status of educational technology and trends in the development of the field in Argentina is based on article documents, reports, and a survey of projects operating in that country. Sixteen references are listed. (Author/CHC)

Biodiversity research in the “big data” era: GigaScience and Pensoft work together to publish the most data-rich species description

PubMed Central

2013-01-01

With the publication of the first eukaryotic species description, combining transcriptomic, DNA barcoding, and micro-CT imaging data, GigaScience and Pensoft demonstrate how classical taxonomic description of a new species can be enhanced by applying new generation molecular methods, and novel computing and imaging technologies. This 'holistic’ approach in taxonomic description of a new species of cave-dwelling centipede is published in the Biodiversity Data Journal (BDJ), with coordinated data release in the GigaScience GigaDB database. PMID:24229463

Biodiversity research in the "big data" era: GigaScience and Pensoft work together to publish the most data-rich species description.

PubMed

Edmunds, Scott C; Hunter, Chris I; Smith, Vincent; Stoev, Pavel; Penev, Lyubomir

2013-10-28

With the publication of the first eukaryotic species description, combining transcriptomic, DNA barcoding, and micro-CT imaging data, GigaScience and Pensoft demonstrate how classical taxonomic description of a new species can be enhanced by applying new generation molecular methods, and novel computing and imaging technologies. This 'holistic' approach in taxonomic description of a new species of cave-dwelling centipede is published in the Biodiversity Data Journal (BDJ), with coordinated data release in the GigaScience GigaDB database.

The development of differential inductors using double air-bridge structure based on integrated passive device technology

NASA Astrophysics Data System (ADS)

Li, Yang; Yao, Zhao; Fu, Xiao-Qian; Li, Zhi-Ming; Shan, Fu-Kai; Wang, Cong

2017-05-01

Recently, integrated passive devices have become increasingly popular; inductor realization, in particular, offers interesting high performance for RF modules and systems. In this paper, a development of differential inductor fabricated by integrated passive devices technology using a double air-bridge structure is presented. A study of the model development of the differential inductor is first demonstrated. In this model section, a segment box analysis method is applied to provide a clear presentation of the differential inductor. Compared with other work that only shows a brief description of the process, the integrated passive devices process used to fabricate the inductor in this study is elaborated on. Finally, a characterization of differential inductors with different physical layout parameters is illustrated based on inductance and quality factors, which provides a valuable reference for realizing high performance. The proposed work provides a good solution for the design, fabrication and practical application of RF modules and systems.

Utilizing a scale model solar system project to visualize important planetary science concepts and develop technology and spatial reasoning skills

NASA Astrophysics Data System (ADS)

Kortenkamp, Stephen J.; Brock, Laci

2016-10-01

Scale model solar systems have been used for centuries to help educate young students and the public about the vastness of space and the relative sizes of objects. We have adapted the classic scale model solar system activity into a student-driven project for an undergraduate general education astronomy course at the University of Arizona. Students are challenged to construct and use their three dimensional models to demonstrate an understanding of numerous concepts in planetary science, including: 1) planetary obliquities, eccentricities, inclinations; 2) phases and eclipses; 3) planetary transits; 4) asteroid sizes, numbers, and distributions; 5) giant planet satellite and ring systems; 6) the Pluto system and Kuiper belt; 7) the extent of space travel by humans and robotic spacecraft; 8) the diversity of extrasolar planetary systems. Secondary objectives of the project allow students to develop better spatial reasoning skills and gain familiarity with technology such as Excel formulas, smart-phone photography, and audio/video editing.During our presentation we will distribute a formal description of the project and discuss our expectations of the students as well as present selected highlights from preliminary submissions.

The intention to use HIV-pre-exposure prophylaxis (PrEP) among men who have sex with men in Switzerland: testing an extended explanatory model drawing on the unified theory of acceptance and use of technology (UTAUT).

PubMed

Nideröst, Sibylle; Gredig, Daniel; Hassler, Benedikt; Uggowitzer, Franziska; Weber, Patrick

2018-01-01

The aim of this study was to determine the intention to use pre-exposure prophylaxis (PrEP) when available and to identify predictors of the intention to use PrEP among men who have sex with men (MSM) living in Switzerland. The theoretical model drew on the Unified Theory of Acceptance and Use of Technology and considered additional variables related specifically to PrEP, HIV protection and the resources of MSM. For data collection, we used an anonymous, standardized self-administered online questionnaire. In 2015, we gathered a convenience sample of 556 HIV-negative MSM living in Switzerland. We analyzed the data using descriptive and bivariate statistics and used structural equation modeling to test the hypothesized model. Predictors of respondents' moderate intention to use PrEP were performance expectancy, effort expectancy, perceived social influence, concerns about using PrEP, attitudes toward condom use, negative experiences of condom use and age. These variables were predicted by HIV protection-related aspects and resources. The findings provide insights into the complex dynamic underlying the intention to use PrEP.

High-Fidelity Flash Lidar Model Development

NASA Technical Reports Server (NTRS)

Hines, Glenn D.; Pierrottet, Diego F.; Amzajerdian, Farzin

2014-01-01

NASA's Autonomous Landing and Hazard Avoidance Technologies (ALHAT) project is currently developing the critical technologies to safely and precisely navigate and land crew, cargo and robotic spacecraft vehicles on and around planetary bodies. One key element of this project is a high-fidelity Flash Lidar sensor that can generate three-dimensional (3-D) images of the planetary surface. These images are processed with hazard detection and avoidance and hazard relative navigation algorithms, and then are subsequently used by the Guidance, Navigation and Control subsystem to generate an optimal navigation solution. A complex, high-fidelity model of the Flash Lidar was developed in order to evaluate the performance of the sensor and its interaction with the interfacing ALHAT components on vehicles with different configurations and under different flight trajectories. The model contains a parameterized, general approach to Flash Lidar detection and reflects physical attributes such as range and electronic noise sources, and laser pulse temporal and spatial profiles. It also provides the realistic interaction of the laser pulse with terrain features that include varying albedo, boulders, craters slopes and shadows. This paper gives a description of the Flash Lidar model and presents results from the Lidar operating under different scenarios.

Call of the North. NECC '96: Proceedings of the Annual National Educational Computing Conference (17th, Minneapolis, Minnesota, June 11-13, 1996).

ERIC Educational Resources Information Center

Ingham, Donella, Ed.

These conference proceedings address the current trends, practices, and research in the field of educational technology. Papers and project descriptions are included on the following topics: the use of technology to encourage learning of special needs students; distance education; integrating technology into the curriculum; technology in…

Technology assessment of solar energy utilization

NASA Astrophysics Data System (ADS)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

Offshore Wind Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Strach-Sonsalla, Mareike; Stammler, Matthias; Wenske, Jan

In 1991, the Vindeby Offshore Wind Farm, the first offshore wind farm in the world, started feeding electricity to the grid off the coast of Lolland, Denmark. Since then, offshore wind energy has developed from this early experiment to a multibillion dollar market and an important pillar of worldwide renewable energy production. Unit sizes grew from 450 kW at Vindeby to the 7.5 MW-class offshore wind turbines (OWT ) that are currently (by October 2014) in the prototyping phase. This chapter gives an overview of the state of the art in offshore wind turbine (OWT) technology and introduces the principlesmore » of modeling and simulating an OWT. The OWT components -- including the rotor, nacelle, support structure, control system, and power electronics -- are introduced, and current technological challenges are presented. The OWT system dynamics and the environment (wind and ocean waves) are described from the perspective of OWT modelers and designers. Finally, an outlook on future technology is provided. The descriptions in this chapter are focused on a single OWT -- more precisely, a horizontal-axis wind turbine -- as a dynamic system. Offshore wind farms and wind farm effects are not described in detail in this chapter, but an introduction and further references are given.« less

A portable pattern-based design technology co-optimization flow to reduce optical proximity correction run-time

NASA Astrophysics Data System (ADS)

Chen, Yi-Chieh; Li, Tsung-Han; Lin, Hung-Yu; Chen, Kao-Tun; Wu, Chun-Sheng; Lai, Ya-Chieh; Hurat, Philippe

2018-03-01

Along with process improvement and integrated circuit (IC) design complexity increased, failure rate caused by optical getting higher in the semiconductor manufacture. In order to enhance chip quality, optical proximity correction (OPC) plays an indispensable rule in the manufacture industry. However, OPC, includes model creation, correction, simulation and verification, is a bottleneck from design to manufacture due to the multiple iterations and advanced physical behavior description in math. Thus, this paper presented a pattern-based design technology co-optimization (PB-DTCO) flow in cooperation with OPC to find out patterns which will negatively affect the yield and fixed it automatically in advance to reduce the run-time in OPC operation. PB-DTCO flow can generate plenty of test patterns for model creation and yield gaining, classify candidate patterns systematically and furthermore build up bank includes pairs of match and optimization patterns quickly. Those banks can be used for hotspot fixing, layout optimization and also be referenced for the next technology node. Therefore, the combination of PB-DTCO flow with OPC not only benefits for reducing the time-to-market but also flexible and can be easily adapted to diversity OPC flow.

Enterprise Pattern: integrating the business process into a unified enterprise model of modern service company

NASA Astrophysics Data System (ADS)

Li, Ying; Luo, Zhiling; Yin, Jianwei; Xu, Lida; Yin, Yuyu; Wu, Zhaohui

2017-01-01

Modern service company (MSC), the enterprise involving special domains, such as the financial industry, information service industry and technology development industry, depends heavily on information technology. Modelling of such enterprise has attracted much research attention because it promises to help enterprise managers to analyse basic business strategies (e.g. the pricing strategy) and even optimise the business process (BP) to gain benefits. While the existing models proposed by economists cover the economic elements, they fail to address the basic BP and its relationship with the economic characteristics. Those proposed in computer science regardless of achieving great success in BP modelling perform poorly in supporting the economic analysis. Therefore, the existing approaches fail to satisfy the requirement of enterprise modelling for MSC, which demands simultaneous consideration of both economic analysing and business processing. In this article, we provide a unified enterprise modelling approach named Enterprise Pattern (EP) which bridges the gap between the BP model and the enterprise economic model of MSC. Proposing a language named Enterprise Pattern Description Language (EPDL) covering all the basic language elements of EP, we formulate the language syntaxes and two basic extraction rules assisting economic analysis. Furthermore, we extend Business Process Model and Notation (BPMN) to support EPDL, named BPMN for Enterprise Pattern (BPMN4EP). The example of mobile application platform is studied in detail for a better understanding of EPDL.

Thermal Protection System of the Space Shuttle

NASA Technical Reports Server (NTRS)

Cleland, John; Iannetti, Francesco

1989-01-01

The Thermal Protection System (TPS), introduced by NASA, continues to incorporate many of the advances in materials over the past two decades. A comprehensive, single-volume summary of the TPS, including system design rationales, key design features, and broad descriptions of the subsystems of TPS (E.g., reusable surface insulation, leading edge structural, and penetration subsystems) is provided. Details of all elements of TPS development and application are covered (materials properties, manufacturing, modeling, testing, installation, and inspection). Disclosures and inventions are listed and potential commercial application of TPS-related technology is discussed.

Cognitive Engineering of Advanced Information Technology for Air Force Systems Design and Deployment: Prototype for Air Defense Intelligence and Operations

DTIC Science & Technology

1989-10-01

train members of the eventual decision-making group to have different strategies, called " policies ," for making inferences and/or decisions. For example...group task, the task side of the lens model is structured so that each person must modify his judgment policy by learning from the other person in order...judgment policy ; that is, they would receive in both pictorial and textual form a description of how each person combines information to make a judgment

TCA High Lift Preliminary Assessment

NASA Technical Reports Server (NTRS)

Wyatt, G. H.; Polito, R. C.; Yeh, D. T.; Elzey, M. E.; Tran, J. T.; Meredith, Paul T.

1999-01-01

This paper presents a TCA (Technology Concept Airplane) High lift Preliminary Assessment. The topics discussed are: 1) Model Description; 2) Data Repeatability; 3) Effect of Inboard L.E. (Leading Edge) Flap Span; 4) Comparison of 14'x22' TCA-1 With NTF (National Transonic Facility) Modified Ref. H; 5) Comparison of 14'x22' and NTF Ref. H Results; 6) Effect of Outboard Sealed Slat on TCA; 7) TCA Full Scale Build-ups; 8) Full Scale L/D Comparisons; 9) TCA Full Scale; and 10) Touchdown Lift Curves. This paper is in viewgraph form.

Studying the HIT-Complexity Interchange.

PubMed

Kuziemsky, Craig E; Borycki, Elizabeth M; Kushniruk, Andre W

2016-01-01

The design and implementation of health information technology (HIT) is challenging, particularly when it is being introduced into complex settings. While complex adaptive system (CASs) can be a valuable means of understanding relationships between users, HIT and tasks, much of the existing work using CASs is descriptive in nature. This paper addresses that issue by integrating a model for analyzing task complexity with approaches for HIT evaluation and systems analysis. The resulting framework classifies HIT-user tasks and issues as simple, complicated or complex, and provides insight on how to study them.

Tensor Arithmetic, Geometric and Mathematic Principles of Fluid Mechanics in Implementation of Direct Computational Experiments

NASA Astrophysics Data System (ADS)

Bogdanov, Alexander; Khramushin, Vasily

2016-02-01

The architecture of a digital computing system determines the technical foundation of a unified mathematical language for exact arithmetic-logical description of phenomena and laws of continuum mechanics for applications in fluid mechanics and theoretical physics. The deep parallelization of the computing processes results in functional programming at a new technological level, providing traceability of the computing processes with automatic application of multiscale hybrid circuits and adaptive mathematical models for the true reproduction of the fundamental laws of physics and continuum mechanics.

Assessing Greek Public Hospitals' Websites.

PubMed

Tsirintani, Maria; Binioris, Spyros

2015-01-01

Following a previous (2011) survey, this study assesses the web pages of Greek public hospitals according to specific criteria, which are included in the same web page evaluation model. Our purpose is to demonstrate the evolution of hospitals' web pages and document e-health applications trends. Using descriptive methods we found that public hospitals have made significant steps towards establishing and improving their web presence but there is still a lot of work that needs to be carried out in order to take advantage of the benefits of new technologies in the e-health ecosystem.

Information-computational system for storage, search and analytical processing of environmental datasets based on the Semantic Web technologies

NASA Astrophysics Data System (ADS)

Titov, A.; Gordov, E.; Okladnikov, I.

2009-04-01

In this report the results of the work devoted to the development of working model of the software system for storage, semantically-enabled search and retrieval along with processing and visualization of environmental datasets containing results of meteorological and air pollution observations and mathematical climate modeling are presented. Specially designed metadata standard for machine-readable description of datasets related to meteorology, climate and atmospheric pollution transport domains is introduced as one of the key system components. To provide semantic interoperability the Resource Description Framework (RDF, http://www.w3.org/RDF/) technology means have been chosen for metadata description model realization in the form of RDF Schema. The final version of the RDF Schema is implemented on the base of widely used standards, such as Dublin Core Metadata Element Set (http://dublincore.org/), Directory Interchange Format (DIF, http://gcmd.gsfc.nasa.gov/User/difguide/difman.html), ISO 19139, etc. At present the system is available as a Web server (http://climate.risks.scert.ru/metadatabase/) based on the web-portal ATMOS engine [1] and is implementing dataset management functionality including SeRQL-based semantic search as well as statistical analysis and visualization of selected data archives [2,3]. The core of the system is Apache web server in conjunction with Tomcat Java Servlet Container (http://jakarta.apache.org/tomcat/) and Sesame Server (http://www.openrdf.org/) used as a database for RDF and RDF Schema. At present statistical analysis of meteorological and climatic data with subsequent visualization of results is implemented for such datasets as NCEP/NCAR Reanalysis, Reanalysis NCEP/DOE AMIP II, JMA/CRIEPI JRA-25, ECMWF ERA-40 and local measurements obtained from meteorological stations on the territory of Russia. This functionality is aimed primarily at finding of main characteristics of regional climate dynamics. The proposed system represents a step in the process of development of a distributed collaborative information-computational environment to support multidisciplinary investigations of Earth regional environment [4]. Partial support of this work by SB RAS Integration Project 34, SB RAS Basic Program Project 4.5.2.2, APN Project CBA2007-08NSY and FP6 Enviro-RISKS project (INCO-CT-2004-013427) is acknowledged. References 1. E.P. Gordov, V.N. Lykosov, and A.Z. Fazliev. Web portal on environmental sciences "ATMOS" // Advances in Geosciences. 2006. Vol. 8. p. 33 - 38. 2. Gordov E.P., Okladnikov I.G., Titov A.G. Development of elements of web based information-computational system supporting regional environment processes investigations // Journal of Computational Technologies, Vol. 12, Special Issue #3, 2007, pp. 20 - 28. 3. Okladnikov I.G., Titov A.G. Melnikova V.N., Shulgina T.M. Web-system for processing and visualization of meteorological and climatic data // Journal of Computational Technologies, Vol. 13, Special Issue #3, 2008, pp. 64 - 69. 4. Gordov E.P., Lykosov V.N. Development of information-computational infrastructure for integrated study of Siberia environment // Journal of Computational Technologies, Vol. 12, Special Issue #2, 2007, pp. 19 - 30.

Biological and Chemical Technologies Research at OIT: Annual Summary Report, FY 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, G.

1998-03-01

The annual summary report presents the fiscal year (FY) 1 997 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program. This BCTR program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1997 (ASR 97) contains the following: program description (including BCTR program mission statement, historical background, relevance, goals and objectives); program structure and organization; selected technical and programmatic highlights for 1 997; detailed descriptions of individual projects; and a listing of program output, including amore » bibliography of published work, patents, and awards arising from work supported by the program.« less

On the engineering design for systematic integration of agent-orientation in industrial automation.

PubMed

Yu, Liyong; Schüller, Andreas; Epple, Ulrich

2014-09-01

In today's automation industry, agent-oriented development of system functionalities appears to have a great potential for increasing autonomy and flexibility of complex operations, while lowering the workload of users. In this paper, we present a reference model for the harmonious and systematical integration of agent-orientation in industrial automation. Considering compatibility with existing automation systems and best practice, this model combines advantages of function block technology, service orientation and native description methods from the automation standard IEC 61131-3. This approach can be applied as a guideline for the engineering design of future agent-oriented automation systems. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

47 CFR 22.401 - Description and purposes of developmental authorizations.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical suitability of antenna locations for stations in the Public Mobile Services; (b) Experimentation leading to the potential development of a new Public Mobile Service or technology; or, (c) Stations... CARRIER SERVICES PUBLIC MOBILE SERVICES Developmental Authorizations § 22.401 Description and purposes of...

Assistive hearing technologies among students with hearing impairment: factors that promote satisfaction.

PubMed

Rekkedal, Ann Mette

2012-01-01

Hearing technology can play an essential part in the education of deaf and hard-of-hearing children in inclusive schools. Few studies have examined these children's experiences with this technology. This article explores factors pertaining to children's use of and attitudes toward hearing technologies, such as hearing aids, cochlear implants, teacher-worn microphones, and student-worn microphones. The study included 153 deaf and hard-of-hearing students. All students communicated orally and were in inclusive schools from grades 5-10. The results suggest that males view hearing technology more positively than do females. Having severe hearing loss also promoted positive attitudes toward hearing aids and cochlear implants, but not toward microphones. The students with positive self-descriptions tended to be more satisfied with hearing aids or cochlear implants than the students with negative self-descriptions. The main factors promoting the use of hearing aids were severe hearing loss, positive attitudes toward hearing aids, and the sound quality of hearing aids.

Design Brief--Packaging: More than Just a Box! Communications: Getting the Message across with Advertising. Technology Learning Activities.

ERIC Educational Resources Information Center

Technology Teacher, 1991

1991-01-01

Each technology learning activity in this article includes content description, objectives, required materials, challenge, and evaluation questions. Subjects are designing product packages and communication through advertising. (SK)

MBTA Green Line Tests - Riverside Line, December 1972 : Volume 1. Description.

DOT National Transportation Integrated Search

1973-09-01

The Urban Rail Supporting Technology Program emphasizes three major task areas; facilities development, technology development, and test program development. The test program development is composed of three sub-areas; vehicle testing, ways and struc...

Job Briefs. Career Education Guide.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC. European Area.

The document contains 288 one-page job descriptions based on 1973 information for the following 11 career clusters: automotive technology, business/clerical/sales, computer technology, electricity/electronics, graphic communications, health/cosmetology, agriculture/conservation, artistic/literary/music, mechanical/transportation/construction,…

Clutter Identification Using Electromagnetic Survey Data

DTIC Science & Technology

2013-07-01

for failing to comply with a collection of information if it does not display a currently valid OMB control number. 1. REPORT DATE JUL 2013 2 . REPORT... 2 2.0 Technology... 2 2.1 Technology Description .................................................................................................. 2 2.2

Breaking the barriers to commercialization of MEMS: a firm's search for competitive advantage

NASA Astrophysics Data System (ADS)

Walsh, Steven T.; Linton, Jonathan D.

1999-08-01

A model of infrastructure development for MEMS manufacturing Technologies is offered. The role of discontinuous innovation in achieving competitive advantage is briefly reviewed. This is followed by the development of a model that describes the stages in the growth of an infrastructure to support Micro-Electro-Mechanical-Systems infrastructure. We briefly describe how an infrastructure gradually grows to support a new industry, resulting from discontinuous innovation. the model indicates the evolving nature of the actions and investments that firms and governments need to make to support the growth of an immature industry. Consequently, we aim to not only offer a descriptive model, but offer guidance to firms on whether their intentions and resources fit with the state of the industry and to offer policy makers guidance on the timing of different types of support.

Adult Literacy and Technology Conference Proceedings (University Park, Pennsylvania, June 4-7, 1987).

ERIC Educational Resources Information Center

Meenan, Avis L., Comp.; Burns, Patricia E., Comp.

These proceedings contain the summaries of 60 presentations. Among those included are: "Desk Top Publishing & Experiential Literacy Material" (Arnold); "A Description of the U.S. Experience in Providing Vocational Skills to Individuals with Low Literacy Skills" (Barbee); "Audio-Disk Technology" (Bixler, MacClay); "Technology for Teachers: A Group…

76 FR 62894 - Agency Information Collection Activities: Notice of Request for Renewal of a Previously Approved...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-11

... innovative technologies that will improve safety, reduce congestion due to construction, and improve quality... project, the innovative technologies to be used and a description of how these technologies will improve safety, reduce construction congestion, and improve quality. The collected information will be used by...

Preservice Science Teachers' Views on Science-Technology-Society

ERIC Educational Resources Information Center

Dikmentepe, Emel; Yakar, Zeha

2016-01-01

The aim of this study is to investigate the views of pre-service science teachers on Science-Technology-Society (STS). In the research, a descriptive research method was used and data were collected using the Views on Science-Technology-Society (VOSTS) Questionnaire. In general, the results of this study revealed that pre-service science teachers…

Fostering an English Teaching Environment: Factors Influencing English as a Foreign Language Teachers' Adoption of Mobile Learning

ERIC Educational Resources Information Center

Jung, Hee-Jung

2015-01-01

The role of mobile technology has significantly increased and been emphasized in English education. However, research investigating EFL teachers' attitudes and behaviors related to mobile technology has been limited in descriptive aspects of the technology, leading to misunderstandings about EFL teachers' needs. Furthermore, many prior studies…

40 CFR 1051.625 - What special provisions apply to unique snowmobile designs for small-volume manufacturers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... standards in § 1051.103, considering technology, cost, and other factors. (2) Identify the level of compliance you can achieve, including a description of available emission-control technologies and any constraints that may prevent more effective use of these technologies. (c) You must give us other relevant...

Innovation Education Enabled through a Collaborative Virtual Reality Learning Environment

ERIC Educational Resources Information Center

Thorsteinsson, Gisli; Page, Tom; Lehtonen, Miika; Ha, Joong Gyu

2006-01-01

This article provides a descriptive account of the development of an approach to the support of design and technology education with 3D Virtual Reality (VR) technologies on an open and distance learning basis. This work promotes an understanding of the implications and possibilities of advanced virtual learning technologies in education for…

Teacher-Directed Student Use of Technology and Mathematics Achievement: Examining Trends in International Patterns

ERIC Educational Resources Information Center

Wang, Yang; O'Dwyer, Laura

2011-01-01

Using data from the Trends in International Mathematics and Science Study (TIMSS) 2003 and 2007 administrations, this study examines international trends in technology use and explores the international patterns in how teacher-directed, student-use of technology is related to eighth grade mathematics achievement. Descriptive patterns in…

Technology Integration in K-12 Science Classrooms: An Analysis of Barriers and Implications

ERIC Educational Resources Information Center

Hechter, Richard P.; Vermette, Laurie Anne

2013-01-01

This paper examines the barriers to technology integration for Manitoban K-12 inservice science educators (n = 430) based on a 10-item online survey; results are analyzed according to teaching stream using the Technology, Pedagogy, and Content Knowledge (TPACK) framework. Quantitative descriptive statistics indicated that the leading barriers…

Design for Learning; 1967 Summer Institute of Technology for Children.

ERIC Educational Resources Information Center

Helen L. Beeler School, Marlton, NJ.

This book is a description of a summer institute of the Technology for Children Project which was designed to help teachers combine technological activities with regular academic lessons for children in grades K-6. Included are: (1) the three institute goals which were to orient elementary classroom teachers, to develop guidelines for…

Instructional Technologies in Social Science Instruction in South Africa

ERIC Educational Resources Information Center

Louw, Johann; Brown, Cheryl; Muller, Johan; Soudien, Crain

2009-01-01

This study describes the results of a survey and a description of instructional technologies in place in the social sciences in South African Universities. Lecturers in the social sciences reported a well-established practice of information and communication technologies (ICTs) use for general purposes (although frequent use tended to be for email…

Next Generation Distributed Computing for Cancer Research

PubMed Central

Agarwal, Pankaj; Owzar, Kouros

2014-01-01

Advances in next generation sequencing (NGS) and mass spectrometry (MS) technologies have provided many new opportunities and angles for extending the scope of translational cancer research while creating tremendous challenges in data management and analysis. The resulting informatics challenge is invariably not amenable to the use of traditional computing models. Recent advances in scalable computing and associated infrastructure, particularly distributed computing for Big Data, can provide solutions for addressing these challenges. In this review, the next generation of distributed computing technologies that can address these informatics problems is described from the perspective of three key components of a computational platform, namely computing, data storage and management, and networking. A broad overview of scalable computing is provided to set the context for a detailed description of Hadoop, a technology that is being rapidly adopted for large-scale distributed computing. A proof-of-concept Hadoop cluster, set up for performance benchmarking of NGS read alignment, is described as an example of how to work with Hadoop. Finally, Hadoop is compared with a number of other current technologies for distributed computing. PMID:25983539

NASA's Space Environments and Effects Program: Technology for the New Millennium

NASA Technical Reports Server (NTRS)

Hardage, Donna M.; Pearson, Steven D.

2000-01-01

Current trends in spacecraft development include the use of advanced technologies while maintaining the "faster, better, cheaper" philosophy. Spacecraft designers are continually designing with smaller and faster electronics as well as lighter and thinner materials providing better performance, lower weight, and ultimately lower costs. Given this technology trend, spacecraft will become increasingly susceptible to the harsh space environments, causing damaging or even disabling effects on space systems. NASA's Space Environments and Effects (SEE) Program defines the space environments and provides advanced technology development to support the design, development, and operation of spacecraft systems that will accommodate or mitigate effects due to the harsh space environments. This Program provides a comprehensive and focused approach to understanding the space environment, to define the best techniques for both flight and ground-based experimentation, to update the models which predict both the environments and the environmental effects on spacecraft, and finally to ensure that this multitudinous information is properly maintained and inserted into spacecraft design programs. A description of the SEE Program, its accomplishments, and future activities is provided.

Next generation distributed computing for cancer research.

PubMed

Agarwal, Pankaj; Owzar, Kouros

2014-01-01

Advances in next generation sequencing (NGS) and mass spectrometry (MS) technologies have provided many new opportunities and angles for extending the scope of translational cancer research while creating tremendous challenges in data management and analysis. The resulting informatics challenge is invariably not amenable to the use of traditional computing models. Recent advances in scalable computing and associated infrastructure, particularly distributed computing for Big Data, can provide solutions for addressing these challenges. In this review, the next generation of distributed computing technologies that can address these informatics problems is described from the perspective of three key components of a computational platform, namely computing, data storage and management, and networking. A broad overview of scalable computing is provided to set the context for a detailed description of Hadoop, a technology that is being rapidly adopted for large-scale distributed computing. A proof-of-concept Hadoop cluster, set up for performance benchmarking of NGS read alignment, is described as an example of how to work with Hadoop. Finally, Hadoop is compared with a number of other current technologies for distributed computing.

Aircraft Loss of Control: Problem Analysis for the Development and Validation of Technology Solutions

NASA Technical Reports Server (NTRS)

Belcastro, Christine M.; Newman, Richard L.; Crider, Dennis A.; Klyde, David H.; Foster, John V.; Groff, Loren

2016-01-01

Aircraft loss of control (LOC) is a leading cause of fatal accidents across all transport airplane and operational classes. LOC can result from a wide spectrum of precursors (or hazards), often occurring in combination. Technologies developed for LOC prevention and recovery must therefore be effective under a wide variety of conditions and uncertainties, including multiple hazards, and the validation process must provide a means of assessing system effectiveness and coverage of these hazards. This paper provides a detailed description of a methodology for analyzing LOC as a dynamics and control problem for the purpose of developing effective technology solutions. The paper includes a definition of LOC based on several recent publications, a detailed description of a refined LOC accident analysis process that is illustrated via selected example cases, and a description of planned follow-on activities for identifying future potential LOC risks and the development of LOC test scenarios. Some preliminary considerations for LOC of Unmanned Aircraft Systems (UAS) and for their safe integration into the National Airspace System (NAS) are also discussed.

Utilization of building information modeling in infrastructure’s design and construction

NASA Astrophysics Data System (ADS)

Zak, Josef; Macadam, Helen

2017-09-01

Building Information Modeling (BIM) is a concept that has gained its place in the design, construction and maintenance of buildings in Czech Republic during recent years. This paper deals with description of usage, applications and potential benefits and disadvantages connected with implementation of BIM principles in the preparation and construction of infrastructure projects. Part of the paper describes the status of BIM implementation in Czech Republic, and there is a review of several virtual design and construction practices in Czech Republic. Examples of best practice are presented from current infrastructure projects. The paper further summarizes experiences with new technologies gained from the application of BIM related workflows. The focus is on the BIM model utilization for the machine control systems on site, quality assurance, quality management and construction management.

Electrolysis Performance Improvement and Validation Experiment

NASA Technical Reports Server (NTRS)

Schubert, Franz H.

1992-01-01

Viewgraphs on electrolysis performance improvement and validation experiment are presented. Topics covered include: water electrolysis: an ever increasing need/role for space missions; static feed electrolysis (SFE) technology: a concept developed for space applications; experiment objectives: why test in microgravity environment; and experiment description: approach, hardware description, test sequence and schedule.

Mathematical Description and Mechanistic Reasoning: A Pathway toward STEM Integration

ERIC Educational Resources Information Center

Weinberg, Paul J.

2017-01-01

Because reasoning about mechanism is critical to disciplined inquiry in science, technology, engineering, and mathematics (STEM) domains, this study focuses on ways to support the development of this form of reasoning. This study attends to how mechanistic reasoning is constituted through mathematical description. This study draws upon Smith's…

Approaching hospital administration about adopting cooling technologies.

PubMed

Kirkland, Lisa L; Parham, William M; Pastores, Stephen M

2009-07-01

The purpose of this article is to provide intensivists with information and examples regarding cooling technology selection, cost assessment, adaptation, barriers, and presentation to hospital administrators. A review of medical and business literature was conducted using the following search terms: technology assessment, organizational innovation, intensive care, critical care, hospital administration, and presentation to administrators. General recommendations for intensivists are made for assessing cooling technology with descriptions of common new technology implementation stages. A study of 16 hospitals implementing a new cardiac surgery technology is described. A description of successful implementation of an induced hypothermia protocol by one of the authors is presented. Although knowledgeable about the applications of new technologies, including cooling technology, intensivists have little guidance or training on tactics to obtain a hospital administration's funding and support. Intensive care unit budgets are usually controlled by nonintensivists whose interests are neutral, at best, to the needs of intensivists. To rise to the top of the large pile of requisition requests, an intensivist's proposal must be well conceived and aligned with hospital administration's strategic goals. Intensivists must understand the hospital acquisition process and administrative structure and participate on high-level hospital committees. Using design thinking and strong leadership skills, the intensivist can marshal support from staff and administrators to successfully implement cooling technology.

[Hardware Implementation of Numerical Simulation Function of Hodgkin-Huxley Model Neurons Action Potential Based on Field Programmable Gate Array].

PubMed

Wang, Jinlong; Lu, Mai; Hu, Yanwen; Chen, Xiaoqiang; Pan, Qiangqiang

2015-12-01

Neuron is the basic unit of the biological neural system. The Hodgkin-Huxley (HH) model is one of the most realistic neuron models on the electrophysiological characteristic description of neuron. Hardware implementation of neuron could provide new research ideas to clinical treatment of spinal cord injury, bionics and artificial intelligence. Based on the HH model neuron and the DSP Builder technology, in the present study, a single HH model neuron hardware implementation was completed in Field Programmable Gate Array (FPGA). The neuron implemented in FPGA was stimulated by different types of current, the action potential response characteristics were analyzed, and the correlation coefficient between numerical simulation result and hardware implementation result were calculated. The results showed that neuronal action potential response of FPGA was highly consistent with numerical simulation result. This work lays the foundation for hardware implementation of neural network.

SEXTANT X-Ray Pulsar Navigation Demonstration: Flight System and Test Results

NASA Technical Reports Server (NTRS)

Winternitz, Luke; Mitchell, Jason W.; Hassouneh, Munther A.; Valdez, Jennifer E.; Price, Samuel R.; Semper, Sean R.; Yu, Wayne H.; Ray, Paul S.; Wood, Kent S.; Arzoumanian, Zaven;

SEXTANT X-Ray Pulsar Navigation Demonstration: Flight System and Test Results

NASA Technical Reports Server (NTRS)

Winternitz, Luke M. B.; Mitchell, Jason W.; Hassouneh, Munther A.; Valdez, Jennifer E.; Price, Samuel R.; Semper, Sean R.; Yu, Wayne H.; Ray, Paul S.; Wood, Kent S.; Arzoumanian, Zaven;

Experimental Evaluation of Verification and Validation Tools on Martian Rover Software

NASA Technical Reports Server (NTRS)

Brat, Guillaume; Giannakopoulou, Dimitra; Goldberg, Allen; Havelund, Klaus; Lowry, Mike; Pasareani, Corina; Venet, Arnaud; Visser, Willem; Washington, Rich

2003-01-01

We report on a study to determine the maturity of different verification and validation technologies (V&V) on a representative example of NASA flight software. The study consisted of a controlled experiment where three technologies (static analysis, runtime analysis and model checking) were compared to traditional testing with respect to their ability to find seeded errors in a prototype Mars Rover. What makes this study unique is that it is the first (to the best of our knowledge) to do a controlled experiment to compare formal methods based tools to testing on a realistic industrial-size example where the emphasis was on collecting as much data on the performance of the tools and the participants as possible. The paper includes a description of the Rover code that was analyzed, the tools used as well as a detailed description of the experimental setup and the results. Due to the complexity of setting up the experiment, our results can not be generalized, but we believe it can still serve as a valuable point of reference for future studies of this kind. It did confirm the belief we had that advanced tools can outperform testing when trying to locate concurrency errors. Furthermore the results of the experiment inspired a novel framework for testing the next generation of the Rover.

Technology and public policy: The process of technology assessment in the federal government

NASA Technical Reports Server (NTRS)

Coates, V. T.

1975-01-01

A study was conducted to provide a descriptive and analytical review of the concept of technology assessment and the current status of its applications in the work of the federal executive agencies. The origin of the term technology assessment was examined along with a brief history of its discussion and development since 1966 and some of the factors influencing that development.

A Descriptive Study of Technology Use in an Urban Setting: Implications for Schools Change

ERIC Educational Resources Information Center

Teclehaimanot, Berhane

2008-01-01

Technology is an integral part of educational goals today. A study of technology use in a large urban Midwestern school district found that teachers have equipment available to them, but it is oftentimes inadequate, inconvenient, or not working. Teachers would like to use technology, but in reality they don't use it. Part of the reason is lack of…

REGIONAL-SCALE ATMOSPHERIC MERCURY MODELING

EPA Science Inventory

This PowerPoint presentation gives a short synopsis of the state of the science of atmospheric mercury modeling, including a description of recent publications of model codes by EPA, a description of a recent mercury model intercomparison study, and a description of a synthesis p...

Coal conversion: description of technologies and necessary biomedical and environmental research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1976-08-01

This document contains a description of the biomedical and environmental research necessary to ensure the timely attainment of coal conversion technologies amenable to man and his environment. The document is divided into three sections. The first deals with the types of processes currently being considered for development; the data currently available on composition of product, process and product streams, and their potential effects; and problems that might arise from transportation and use of products. Section II is concerned with a description of the necessary research in each of the King-Muir categories, while the third section presents the research strategies necessarymore » to assess the potential problems at the conversion plant (site specific) and those problems that might effect the general public and environment as a result of the operation of large-scale coal conversion plants.« less

Development of a health information technology acceptance model using consumers' health behavior intention.

PubMed

Kim, Jeongeun; Park, Hyeoun-Ae

2012-10-01

For effective health promotion using health information technology (HIT), it is mandatory that health consumers have the behavioral intention to measure, store, and manage their own health data. Understanding health consumers' intention and behavior is needed to develop and implement effective and efficient strategies. To develop and verify the extended Technology Acceptance Model (TAM) in health care by describing health consumers' behavioral intention of using HIT. This study used a cross-sectional descriptive correlational design. We extended TAM by adding more antecedents and mediating variables to enhance the model's explanatory power and to make it more applicable to health consumers' behavioral intention. Additional antecedents and mediating variables were added to the hypothetical model, based on their theoretical relevance, from the Health Belief Model and theory of planned behavior, along with the TAM. We undertook structural equation analysis to examine the specific nature of the relationship involved in understanding consumers' use of HIT. Study participants were 728 members recruited from three Internet health portals in Korea. Data were collected by a Web-based survey using a structured self-administered questionnaire. The overall fitness indices for the model developed in this study indicated an acceptable fit of the model. All path coefficients were statistically significant. This study showed that perceived threat, perceived usefulness, and perceived ease of use significantly affected health consumers' attitude and behavioral intention. Health consumers' health status, health belief and concerns, subjective norm, HIT characteristics, and HIT self-efficacy had a strong indirect impact on attitude and behavioral intention through the mediators of perceived threat, perceived usefulness, and perceived ease of use. An extended TAM in the HIT arena was found to be valid to describe health consumers' behavioral intention. We categorized the concepts in the extended TAM into 3 domains: health zone, information zone, and technology zone.

Creating and parameterizing patient-specific deep brain stimulation pathway-activation models using the hyperdirect pathway as an example

PubMed Central

Gunalan, Kabilar; Chaturvedi, Ashutosh; Howell, Bryan; Duchin, Yuval; Lempka, Scott F.; Patriat, Remi; Sapiro, Guillermo; Harel, Noam; McIntyre, Cameron C.

2017-01-01

Background Deep brain stimulation (DBS) is an established clinical therapy and computational models have played an important role in advancing the technology. Patient-specific DBS models are now common tools in both academic and industrial research, as well as clinical software systems. However, the exact methodology for creating patient-specific DBS models can vary substantially and important technical details are often missing from published reports. Objective Provide a detailed description of the assembly workflow and parameterization of a patient-specific DBS pathway-activation model (PAM) and predict the response of the hyperdirect pathway to clinical stimulation. Methods Integration of multiple software tools (e.g. COMSOL, MATLAB, FSL, NEURON, Python) enables the creation and visualization of a DBS PAM. An example DBS PAM was developed using 7T magnetic resonance imaging data from a single unilaterally implanted patient with Parkinson’s disease (PD). This detailed description implements our best computational practices and most elaborate parameterization steps, as defined from over a decade of technical evolution. Results Pathway recruitment curves and strength-duration relationships highlight the non-linear response of axons to changes in the DBS parameter settings. Conclusion Parameterization of patient-specific DBS models can be highly detailed and constrained, thereby providing confidence in the simulation predictions, but at the expense of time demanding technical implementation steps. DBS PAMs represent new tools for investigating possible correlations between brain pathway activation patterns and clinical symptom modulation. PMID:28441410

A compact physical model for the simulation of pNML-based architectures

NASA Astrophysics Data System (ADS)

Turvani, G.; Riente, F.; Plozner, E.; Schmitt-Landsiedel, D.; Breitkreutz-v. Gamm, S.

2017-05-01

Among emerging technologies, perpendicular Nanomagnetic Logic (pNML) seems to be very promising because of its capability of combining logic and memory onto the same device, scalability, 3D-integration and low power consumption. Recently, Full Adder (FA) structures clocked by a global magnetic field have been experimentally demonstrated and detailed characterizations of the switching process governing the domain wall (DW) nucleation probability Pnuc and time tnuc have been performed. However, the design of pNML architectures represent a crucial point in the study of this technology; this can have a remarkable impact on the reliability of pNML structures. Here, we present a compact model developed in VHDL which enables to simulate complex pNML architectures while keeping into account critical physical parameters. Therefore, such parameters have been extracted from the experiments, fitted by the corresponding physical equations and encapsulated into the proposed model. Within this, magnetic structures are decomposed into a few basic elements (nucleation centers, nanowires, inverters etc.) represented by the according physical description. To validate the model, we redesigned a FA and compared our simulation results to the experiment. With this compact model of pNML devices we have envisioned a new methodology which makes it possible to simulate and test the physical behavior of complex architectures with very low computational costs.

SUMMARY REPORT: SMALL COMMUNITY WATER AND WASTE- WATER TREATMENT

EPA Science Inventory

This summary report presents information on the unique needs of small communities facing new water and wastewater treatment requirements. t contains three main sections: technology overviews (each presents a process description, O&M requirements, technology limitations, and finan...

ALTERNATIVE ENERGY SOURCES FOR WASTEWATER TREATMENT PLANTS

EPA Science Inventory

The technology assessment provides an introduction to the use of several alternative energy sources at wastewater treatment plants. The report contains fact sheets (technical descriptions) and data sheets (cost and design information) for the technologies. Cost figures and schema...

Research and technology: 1986 annual report of the Lyndon B. Johnson Space Center

NASA Technical Reports Server (NTRS)

1986-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1986 are highlighted. Included are research funded by the Office of Aeronautics and Space Technology; Solar System Exploration and Life Sciences research funded by the Office of Space Sciences and Applications; and Advanced Programs tasks funded by the Office of Space Flight. Summary sections describing the role of the Johnson Space Center in each program are followed by one-page descriptions of significant projects. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Space station systems analysis study. Part 3: Documentation. Volume 4: Supporting research and technology report

NASA Technical Reports Server (NTRS)

1977-01-01

A brief description of recommended supporting research and technology items resulting from the space station analysis study is provided. Descriptions include the title; the status with respect to the state of the art; the justification; the technical plan including objectives and technical approach; resource requirements categorized by manpower, specialized facilities, and funding in 1977 dollars; and also the target schedule. The goal is to provide high confidence in the solutions for the various functional system development problems, and to do so within a time period compatible with the overall evolutionary space construction base schedule.

Research and technology at the Lyndon B. Johnson Space Center

NASA Technical Reports Server (NTRS)

1983-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1983 are highlighted. Included are research funded by the Office of Aeronautics and Space Technology; Advanced Programs tasks funded by the Office of Space Flight; and Solar System Explorations, Life Sciences, and Earth Sciences and Applications research funded by the Office of Space Sciences and Applications. Summary sections describing the role of the Johnson Space Center in each program are followed by one-page descriptions of significant projects. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Improving accessibility to mathematical formulas: the Wikipedia Math Accessor

NASA Astrophysics Data System (ADS)

Fuentes Sepúlveda, J.; Ferres, L.

2012-09-01

Mathematics accessibility is an important topic for inclusive education. In this paper, we make Wikipedia's repository of mathematical formulas accessible by providing a natural language description of its more than 420,000 formulas using a well-researched sub-language. We also contribute by targeting Spanish speakers, for whom assistive technologies, particularly domain-specific technologies like the one described here, are scarce. Our focus on the semantics of formulas (rather than their visual appearance) allowed us to generate verbalizations with a precision of approximately 80% of understandable descriptions, as shown in an evaluation with sighted users.

Research and technology: 1985 annual report of the Lyndon B. Johnson Space Center

NASA Technical Reports Server (NTRS)

1985-01-01

Johnson Space Center accomplishments in new and advanced concepts during 1985 are highlighted. Included are research funded by the Office of Aeronautics and Space Technology; Solar System Exploration and Life Sciences research funded by the Office of Space Sciences and Applications; and Advanced Programs tasks funded by the Office of Space Flight. Summary sections describing the role of the Johnson Space Center in each program are followed by one-page descriptions of significant projects. Descriptions are suitable for external consumption, free of technical jargon, and illustrated to increase ease of comprehension.

Pharmacy and primary care perspectives on e-prescribing in a rural community: A focused ethnography.

PubMed

Kooienga, Sarah; Singh, Reshmi L

Electronic prescribing (ERx) is the ability for prescriber to send a digital prescription directly to a pharmacist through a dedicated secure network. A number of federally funded incentives such as the health information technology for economic and clinical health (HITECH) and Meaningful Use standards have led to ERx implementation. ERx is an integral part of primary care practice and today most community pharmacies are enabled to accept e-prescriptions. Little is known about the experience of rural pharmacists, primary care providers and patients regarding e-prescribing. This paper reports on the results of ERx from their perspectives. The findings are a portion of a larger qualitative descriptive study focused on the meaning of Meaningful Use in remote rural communities. One remote rural community in the Pacific Northwest was used for this research endeavor. Explore understandings of e-prescribing from both pharmacist and primary care provider perspective. Explore patients' understandings and experiences of e-prescribing. The conceptual model for this research was the Ecological Transactional Model. This model informed the research design, interview questions and analysis. A qualitative descriptive methodology - focused ethnography was used for this study. Six key informant interviews, 14 patient interviews and 15 hours of participant observation provided the data. Data analysis occurred collectively between a social pharmacy researcher, a primary care nurse practitioner-researcher and pharmacy graduate students. The research qualitatively identified contextual understandings and dimensions of ERx in this setting. Based on a focused ethnographic methodology, contextual understandings of rurality and role identity, both pharmacist and primary care provider, were explored. Perspectives on ERx of patients, clinic manager and RN staff were also elicited. Three dimensions of ERx were identified - technological, structural and communication. The structural, technological and communication dimensions are essential in understanding e-prescribing across settings and addressing digital divides in our health care system. Implications for interprofessional pharmacy education were addressed. Understanding the rural context and the need for role adaptability has implications for health care policy. Additional research is needed on the role of the rural pharmacist and how best to interact with primary care providers and patients. Copyright © 2016 Elsevier Inc. All rights reserved.

BioHackathon series in 2011 and 2012: penetration of ontology and linked data in life science domains

PubMed Central

2014-01-01

The application of semantic technologies to the integration of biological data and the interoperability of bioinformatics analysis and visualization tools has been the common theme of a series of annual BioHackathons hosted in Japan for the past five years. Here we provide a review of the activities and outcomes from the BioHackathons held in 2011 in Kyoto and 2012 in Toyama. In order to efficiently implement semantic technologies in the life sciences, participants formed various sub-groups and worked on the following topics: Resource Description Framework (RDF) models for specific domains, text mining of the literature, ontology development, essential metadata for biological databases, platforms to enable efficient Semantic Web technology development and interoperability, and the development of applications for Semantic Web data. In this review, we briefly introduce the themes covered by these sub-groups. The observations made, conclusions drawn, and software development projects that emerged from these activities are discussed. PMID:24495517

The Sunrise project: An R&D project for a national information infrastructure prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Juhnyoung

1995-02-01

Sunrise is a Los Alamos National Laboratory (LANL) project started in October 1993. It is intended to a prototype National Information Infrastructure (NII) development project. A main focus of Sunrise is to tie together enabling technologies (networking, object-oriented distributed computing, graphical interfaces, security, multimedia technologies, and data mining technologies) with several specific applications. A diverse set of application areas was chosen to ensure that the solutions developed in the project are as generic as possible. Some of the application areas are materials modeling, medical records and image analysis, transportation simulations, and education. This paper provides a description of Sunrise andmore » a view of the architecture and objectives of this evolving project. The primary objectives of Sunrise are three-fold: (1) To develop common information-enabling tools for advanced scientific research and its applications to industry; (2) To enhance the capabilities of important research programs at the Laboratory; and (3) To define a new way of collaboration between computer science and industrially relevant research.« less

A network-based distributed, media-rich computing and information environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phillips, R.L.

1995-12-31

Sunrise is a Los Alamos National Laboratory (LANL) project started in October 1993. It is intended to be a prototype National Information Infrastructure development project. A main focus of Sunrise is to tie together enabling technologies (networking, object-oriented distributed computing, graphical interfaces, security, multi-media technologies, and data-mining technologies) with several specific applications. A diverse set of application areas was chosen to ensure that the solutions developed in the project are as generic as possible. Some of the application areas are materials modeling, medical records and image analysis, transportation simulations, and K-12 education. This paper provides a description of Sunrise andmore » a view of the architecture and objectives of this evolving project. The primary objectives of Sunrise are three-fold: (1) To develop common information-enabling tools for advanced scientific research and its applications to industry; (2) To enhance the capabilities of important research programs at the Laboratory; (3) To define a new way of collaboration between computer science and industrially-relevant research.« less

Quantitative metrics for assessment of chemical image quality and spatial resolution

DOE PAGES

Kertesz, Vilmos; Cahill, John F.; Van Berkel, Gary J.

2016-02-28

Rationale: Currently objective/quantitative descriptions of the quality and spatial resolution of mass spectrometry derived chemical images are not standardized. Development of these standardized metrics is required to objectively describe chemical imaging capabilities of existing and/or new mass spectrometry imaging technologies. Such metrics would allow unbiased judgment of intra-laboratory advancement and/or inter-laboratory comparison for these technologies if used together with standardized surfaces. Methods: We developed two image metrics, viz., chemical image contrast (ChemIC) based on signal-to-noise related statistical measures on chemical image pixels and corrected resolving power factor (cRPF) constructed from statistical analysis of mass-to-charge chronograms across features of interest inmore » an image. These metrics, quantifying chemical image quality and spatial resolution, respectively, were used to evaluate chemical images of a model photoresist patterned surface collected using a laser ablation/liquid vortex capture mass spectrometry imaging system under different instrument operational parameters. Results: The calculated ChemIC and cRPF metrics determined in an unbiased fashion the relative ranking of chemical image quality obtained with the laser ablation/liquid vortex capture mass spectrometry imaging system. These rankings were used to show that both chemical image contrast and spatial resolution deteriorated with increasing surface scan speed, increased lane spacing and decreasing size of surface features. Conclusions: ChemIC and cRPF, respectively, were developed and successfully applied for the objective description of chemical image quality and spatial resolution of chemical images collected from model surfaces using a laser ablation/liquid vortex capture mass spectrometry imaging system.« less

Quantitative metrics for assessment of chemical image quality and spatial resolution

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kertesz, Vilmos; Cahill, John F.; Van Berkel, Gary J.

Rationale: Currently objective/quantitative descriptions of the quality and spatial resolution of mass spectrometry derived chemical images are not standardized. Development of these standardized metrics is required to objectively describe chemical imaging capabilities of existing and/or new mass spectrometry imaging technologies. Such metrics would allow unbiased judgment of intra-laboratory advancement and/or inter-laboratory comparison for these technologies if used together with standardized surfaces. Methods: We developed two image metrics, viz., chemical image contrast (ChemIC) based on signal-to-noise related statistical measures on chemical image pixels and corrected resolving power factor (cRPF) constructed from statistical analysis of mass-to-charge chronograms across features of interest inmore » an image. These metrics, quantifying chemical image quality and spatial resolution, respectively, were used to evaluate chemical images of a model photoresist patterned surface collected using a laser ablation/liquid vortex capture mass spectrometry imaging system under different instrument operational parameters. Results: The calculated ChemIC and cRPF metrics determined in an unbiased fashion the relative ranking of chemical image quality obtained with the laser ablation/liquid vortex capture mass spectrometry imaging system. These rankings were used to show that both chemical image contrast and spatial resolution deteriorated with increasing surface scan speed, increased lane spacing and decreasing size of surface features. Conclusions: ChemIC and cRPF, respectively, were developed and successfully applied for the objective description of chemical image quality and spatial resolution of chemical images collected from model surfaces using a laser ablation/liquid vortex capture mass spectrometry imaging system.« less

Proposing Electronic Health Record Usability Requirements Based on Enriched ISO 9241 Metric Usability Model

PubMed Central

Farzandipour, Mehrdad; Riazi, Hossein; Jabali, Monireh Sadeqi

2018-01-01

Introduction: System usability assessment is among the important aspects in assessing the quality of clinical information technology, especially when the end users of the system are concerned. This study aims at providing a comprehensive list of system usability. Methods: This research is a descriptive cross-sectional one conducted using Delphi technique in three phases in 2013. After experts’ ideas were concluded, the final version of the questionnaire including 163 items in three phases was presented to 40 users of information systems in hospitals. The grading ranged from 0-4. Data analysis was conducted using SPSS software. Those requirements with a mean point of three or higher were finally confirmed. Results: The list of system usability requirements for electronic health record was designed and confirmed in nine areas including suitability for the task (24 items), self-descriptiveness (22 items), controllability (19 questions), conformity with user expectations (25 items), error tolerance (21 items), suitability for individualization (7 items), suitability for learning (19 items), visual clarity (18 items) and auditory presentation (8 items). Conclusion: A relatively comprehensive model including useful requirements for using EHR was presented which can increase functionality, effectiveness and users’ satisfaction. Thus, it is suggested that the present model be adopted by system designers and healthcare system institutions to assess those systems. PMID:29719310

Assessment of the Technologies for Molecular Biodosimetry for Human Low-Dose Radiation Exposure Symposium: Agenda and Abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Matthew A.; Ramakrishnan, Narayani

In the event of a radiological accident, the rapid evaluation of the individual absorbed dose is paramount to discriminate those individuals who must receive medical attention. New research with genomic- and proteomic-wide tools is showing that within minutes to hours after exposure to ionizing radiation the cellular machinery is modified. For example: large-scale changes occur in the gene expression profiles involving a broad variety of cellular pathways after a wide range of both low dose (<10 cGy) and high dose (>10 cGy) ionizing radiation exposures. Symposium 12 was organized to address a wide range of biological effects using the latestmore » technologies. To address current models following ionizing radiation exposure, methods in biodosimetry and dose effects the symposia featured a general overview titled “Model Systems and Current Approaches in Biodosimetry” by Matthew A. Coleman, from Lawrence Livermore National Laboratory and a talk entitled “Brief Overview of Biodosimetry Projects in the NIH Rad/Nuc Program” by Dr. Narayani Ramakrishnan, National Institute of Allergy and Infectious Diseases. These two talk set the tone for issues in data and model integration as well as addressing the national need for robust technologies for biological dosimetry. The report continues with more description of the presentations, along with the agenda and abstracts of the papers presented.« less

Workflow of CAD / CAM Scoliosis Brace Adjustment in Preparation Using 3D Printing.

PubMed

Weiss, Hans-Rudolf; Tournavitis, Nicos; Nan, Xiaofeng; Borysov, Maksym; Paul, Lothar

2017-01-01

High correction bracing is the most effective conservative treatment for patients with scoliosis during growth. Still today braces for the treatment of scoliosis are made by casting patients while computer aided design (CAD) and computer aided manufacturing (CAM) is available with all possibilities to standardize pattern specific brace treatment and improve wearing comfort. CAD / CAM brace production mainly relies on carving a polyurethane foam model which is the basis for vacuuming a polyethylene (PE) or polypropylene (PP) brace. Purpose of this short communication is to describe the workflow currently used and to outline future requirements with respect to 3D printing technology. Description of the steps of virtual brace adjustment as available today are content of this paper as well as an outline of the great potential there is for the future 3D printing technology. For 3D printing of scoliosis braces it is necessary to establish easy to use software plug-ins in order to allow adding 3D printing technology to the current workflow of virtual CAD / CAM brace adjustment. Textures and structures can be added to the brace models at certain well defined locations offering the potential of more wearing comfort without losing in-brace correction. Advances have to be made in the field of CAD / CAM software tools with respect to design and generation of individually structured brace models based on currently well established and standardized scoliosis brace libraries.

AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Petersen, G.; Bair, K.; Ross, J.

1994-03-01

The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listingmore » of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.« less

The Employment Impact of Technological Change. Technology and the American Economy, Appendix Volume II.

ERIC Educational Resources Information Center

National Commission on Technology, Automation and Economic Progress, Washington, DC.

Eleven descriptive studies prepared by independent experts and dealing with the employment impact of technological change are presented. Part I contains (1) an analysis, at the establishment level, of employment-increasing growth of output and employment-decreasing growth of output per man-hour, (2) case studies of the elapsed time involved in the…

Curriculums in Industrial Technology. Plastics Technology. Industrial Maintenance. Computer Numerical Control. Teacher's Manuals and Student Learning Guides.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

Curriculum guides are provided for plastics technology, industrial maintenance, and computer numerical control. Each curriculum is divided into a number of courses. For each course these instructor materials are presented in the official course outline: course description, course objectives, unit titles, texts and materials, instructor resources,…

Provision of Educational Technology at Secondary School Level in North West Frontier Province Pakistan

ERIC Educational Resources Information Center

Akhtar, Sajjad Hayat

2008-01-01

Purpose: The study looked into a descriptive research to evaluate the use of educational technology at secondary school level North West Frontier Province (Pakistan). The study has defined the availability, usefulness, problems, emerging trends and status of educational technology. The main focus of the study was the utilization and availability…

Airspace Technology Demonstration 3 (ATD-3): Applied Traffic Flow Management Project Overview

NASA Technical Reports Server (NTRS)

Gong, Chester

2016-01-01

ATD-3 Project Overview for 3rd Joint Workshop for KAIA-KARI - NASA ATM Research Collaboration. This presentation gives a high level description of the ATD-3 project and related technologies. These technologies include Multi-Flight Common Routes (MFCR), Traffic Aware Strategic Aircrew Requests (TASAR) and Dynamic Routes for Arrivals in Weather (DRAW).

The Nature of Exhibits about Acoustics in Science and Technology Centres

ERIC Educational Resources Information Center

Afonso, Ana S.; Gilbert, John K.

2008-01-01

This is a study of the opportunities currently provided by interactive science and technology centres for visitors' engagement in the field of acoustics. E-mails, requesting a description of exhibits on acoustics (sound and hearing) in use, were sent to members of staff of interactive science and technology centres around the world as well as to…

Mississippi Curriculum Framework for Forestry Technology (Program CIP: 03.0401--Forest Harvesting and Production Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the forestry technology program cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the…

Attitudes and Behavior of Ajman University of Science and Technology Students towards the Environment

ERIC Educational Resources Information Center

Raman, Rasha Abdel

2016-01-01

This study examined the attitudes and behavior of Ajman University of Science and Technology (AUST) students towards the environment according to their gender and college. The research was based on a descriptive approach. The sample consisted of (375) students (230 males and 145 females) from different colleges (Law, Information Technology, Mass…

Analysis of Job Announcements and the Required Competencies for Instructional Technology Professionals.

ERIC Educational Resources Information Center

Moallem, Mahnaz

A study was conducted to analyze current job announcements in the field of instructional design and technology and to produce descriptive information that portrays the required skills and areas of knowledge for instructional technology graduates. Content analysis, in its general terms, was used as the research method for this study. One hundred…

Mississippi Curriculum Framework for Medical Radiologic Technology (Radiography) (CIP: 51.0907--Medical Radiologic Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the radiologic technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies for the program,…

77 FR 48157 - Office of the National Coordinator for Health Information Technology; Announcement of...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... on YouTube.com or Vimeo.com (the Video should be no longer than 2 minutes); A text description of... open call for the public to create short, inspiring videos sharing how you use technology to manage... Challenge invites you to create short, inspiring videos sharing how you use technology to manage your...

A Qualitative Analysis of Ninth Grade High School Teachers' Perceptions of Online Discussions to Supplement Classroom Instruction

ERIC Educational Resources Information Center

Watson, Rhonda

2015-01-01

Current web technologies are changing the landscape of education. Today's students communicate and learn differently than those of previous generations, yet a gap still exists between available technology and teacher use of technology for instruction. The purpose of this qualitative descriptive case study was to examine teachers' perceptions of…

Controlled Structures Technology Steering Committee Workshop

NASA Technical Reports Server (NTRS)

1992-01-01

Viewgraphs on controlled structures technology presented at the steering committee workshop on 22-23 Jan. 1992 are included. Topics addressed include: interferometer testbed; middeck 0-gravity dynamics experiment; middeck active control experiment; multivariable identification for control; strain actuated aeroelastic control; sensor/actuator technology development; input command shaping; and other research projects. A description of the organization and committee are included.

Programs for Middle School Math: An Inventory of Existing Technology. Working Paper

ERIC Educational Resources Information Center

Saultz, Andrew

2012-01-01

In this working paper, Andrew Saultz of Michigan State University inventories the current landscape of technology programs available for middle school math. The working paper is not intended as a "consumers' guide" to technology programs, and the descriptions of some specific programs are not fully accurate or current. Readers who are interested…

Mississippi Curriculum Framework for Civil Technology (Program CIP: 15.0201--Civil Engineering/Civil Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the civil technology programs cluster. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and section…

Mississippi Curriculum Framework for Medical Laboratory Technology Programs (CIP: 51.1004--Medical Laboratory Technology). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the medical laboratory technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies, and…

Models and Simulations as a Service: Exploring the Use of Galaxy for Delivering Computational Models

PubMed Central

Walker, Mark A.; Madduri, Ravi; Rodriguez, Alex; Greenstein, Joseph L.; Winslow, Raimond L.

2016-01-01

We describe the ways in which Galaxy, a web-based reproducible research platform, can be used for web-based sharing of complex computational models. Galaxy allows users to seamlessly customize and run simulations on cloud computing resources, a concept we refer to as Models and Simulations as a Service (MaSS). To illustrate this application of Galaxy, we have developed a tool suite for simulating a high spatial-resolution model of the cardiac Ca2+ spark that requires supercomputing resources for execution. We also present tools for simulating models encoded in the SBML and CellML model description languages, thus demonstrating how Galaxy’s reproducible research features can be leveraged by existing technologies. Finally, we demonstrate how the Galaxy workflow editor can be used to compose integrative models from constituent submodules. This work represents an important novel approach, to our knowledge, to making computational simulations more accessible to the broader scientific community. PMID:26958881

Avionics Maintenance Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

Environmental Technology Verification (ETV) Program Case Studies: Demonstrating Program Outcomes, Volume III

EPA Science Inventory

This booklet, ETV Program Case Studies: Demonstrating Program Outcomes, Volume III contains two case studies, addressing verified environmental technologies for decentalized wastewater treatment and converting animal waste to energy. Each case study contains a brief description ...

Improved Navigational Technology and Air Traffic Control: A Description of Controller Coordination and Workload

DOT National Transportation Integrated Search

1995-04-01

Improved navigational technology, such as microwave landing systems (MLS) or : global positioning systems (GPS), installed in today's commercial aircraft : enable the air traffic control (ATC) system to better utilize its airspace. : This increased e...

Distributed Space System Technology Demonstrations with the Emerald Nanosatellite

NASA Technical Reports Server (NTRS)

Twiggs, Robert

2002-01-01

A viewgraph presentation of Distributed Space System Technologies utilizing the Emerald Nanosatellite is shown. The topics include: 1) Structure Assembly; 2) Emerald Mission; 3) Payload and Mission Operations; 4) System and Subsystem Description; and 5) Safety Integration and Testing.

Desktop Publishing: A New Frontier for Instructional Technologists.

ERIC Educational Resources Information Center

Bell, Norman T.; Warner, James W.

1986-01-01

Discusses new possibilities that computers and laser printers offer instructional technologists. Includes a brief history of printed communications, a description of new technological advances referred to as "desktop publishing," and suggests the application of this technology to instructional tasks. (TW)

Science.

ERIC Educational Resources Information Center

Roach, Linda E., Ed.

This document contains the following papers on science instruction and technology: "A 3-D Journey in Space: A New Visual Cognitive Adventure" (Yoav Yair, Rachel Mintz, and Shai Litvak); "Using Collaborative Inquiry and Interactive Technologies in an Environmental Science Project for Middle School Teachers: A Description and…

National parks : transportation alternatives and advanced technology for the 21st century : conference proceedings

DOT National Transportation Integrated Search

1999-06-03

This overview provides a description of the proceedings of a conference entitled, "National Parks: Transportation Alternatives and Advanced Technology for the 21st Century," sponsored by the Western Transportation Institute at Montana State Universit...

1990 fuel cell seminar: Program and abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-31

This volume contains author prepared short resumes of the presentations at the 1990 Fuel Cell Seminar held November 25-28, 1990 in Phoenix, Arizona. Contained herein are 134 short descriptions organized into topic areas entitled An Environmental Overview, Transportation Applications, Technology Advancements for Molten Carbonate Fuel Cells, Technology Advancements for Solid Fuel Cells, Component Technologies and Systems Analysis, Stationary Power Applications, Marine and Space Applications, Technology Advancements for Acid Type Fuel Cells, and Technology Advancement for Solid Oxide Fuel Cells.

Technology assessment of portable energy RDT and P, phase 1

NASA Technical Reports Server (NTRS)

Spraul, J. R. (Compiler)

1975-01-01

A technological assessment of portable energy research, development, technology, and production was undertaken to assess the technical, economic, environmental, and sociopolitical issues associated with portable energy options. Those courses of action are discussed which would impact aviation and air transportation research and technology. Technology assessment workshops were held to develop problem statements. The eighteen portable energy problem statements are discussed in detail along with each program's objective, approach, task description, and estimates of time and costs.

Science and Technology in Asian Development. Conference on the Application of Science and Technology to the Development of Asia (New Delhi, India, August, 1968).

ERIC Educational Resources Information Center

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

The conclusions reached by commissions established by the Conference on the Application of Science and Technology to the Development of Asia, convened by UNESCO in 1968, are presented after brief descriptions of the present status of applied science and technology in 19 Asian countries. One commission studied social, economic, and cultural factors…

Manufacturing process applications team (MATEAM). [technology transfer in the areas of machine tools and robots

NASA Technical Reports Server (NTRS)

1979-01-01

The transfer of NASA technology to the industrial sector is reported. Presentations to the machine tool and robot industries and direct technology transfers of the Adams Manipulator arm, a-c motor control, and the bolt tension monitor are discussed. A listing of proposed RTOP programs with strong potential is included. A detailed description of the rotor technology available to industry is given.

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

48 CFR 752.7005 - Submission requirements for development experience documents.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., technologies, management, research, results and experience as outlined in the Agency's ADS Chapter 540, section... paragraph (b)(1)(i) of this clause. (2) Format. (i) Descriptive information is required for all Contractor... descriptive information: (A) Name and version of the application software used to create the file, e.g., Word...

The Utility of a Geostationary Doppler radar applied to the hurricane analysis and prediction problem: A Report on the 1st Nexrad in Space Workshop

NASA Astrophysics Data System (ADS)

Tripoli, G. J.; Chandrasekar, V.; Chen, S. S.; Holland, G. J.; Im, E.; Kakar, R.; Lewis, W. E.; Marks, F. D.; Smith, E. A.; Tanelli, S.

2007-12-01

Last April the first Nexrad in Space (NIS) workshop was held in Miami, Florida to discuss the value and requirements for a possible satellite mission featuring a Doppler radar in geostationary orbit capable of measuring the internal structure of tropical cyclones over a circular scan area 50 degrees latitude in diameter. The proposed NIS technology, based on the PR2 radar design developed at JPL and an innovative deployable antenna design developed at UCLA would be capable of 3D volume sampling with 12 km horizontal and 300 m vertical resolution and 1 hour scan period. The workshop participants consisted of the JPL and UCLA design teams and cross section of tropical cyclone forecasters, researchers and modelers who could potentially benefit from this technology. The consensus of the workshop included: (a) the NIS technology would provide observations to benefit hurricane forecasters, real time weather prediction models and model researchers, (b) the most important feature of NIS was its high frequency coverage together with its 3D observation capability. These features were found to fill a data gap, now developing within cloud resolving analysis and prediction systems for which there is no other proposed solution, particularly over the oceans where TCs form. Closing this data gap is important to the improvement of TC intensity prediction. A complete description of the potential benefits and recommended goals for this technology concluded by the workshop participants will be given at the oral presentation.

Contemporary Aspects of Marketing in Clinical Trials Including Segments of IT and Technology Transfer

PubMed Central

Stamenovic, Milorad; Dobraca, Amra; Smajlovic, Mersiha

2018-01-01

Introduction: The aim of this paper is to present the marketing strategy and the application of management (marketing management) and advertising in order to increase the efficiency of innovative approach in clinical trials that include and involve the use of new technologies and transfer of technologies. Material and Methods: This paper has a descriptive character and represents a narrative review of the literature and new model implementation. Results: Marketing models are primarily used to improve the inclusion of a larger (and appropriate) number of patients, but they can be credited for the stay and monitoring of patients in the trial. Regulatory mechanisms play an important role in the application of various marketing strategies within clinical trials. The value for the patient as the most important stakeholder is defined in the field of clinical trials according to Kotler’s value model for the consumer. Conclusion: In order to achieve the best results it is important to adequately examine all the elements of clinical trials and apply this knowledge in creation of a marketing plan that will be made in accordance with the legal regulations defined globally and locally. In this paper, two challenges have been highlighted for the adequate application of marketing tools in the field of clinical trials, namely: defining business elements in order to provide an adequate marketing approach for clinical trials and technology transfer and ensuring uniformity and regulatory affirmation of marketing attitudes in clinical trials in all regions in which they are carried out in accordance with ICH-GCP and valid regulations. PMID:29719318

NDARC NASA Design and Analysis of Rotorcraft. Appendix 5; Theory

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2017-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

NDARC: NASA Design and Analysis of Rotorcraft. Appendix 3; Theory

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet speci?ed requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft con?gurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates con?guration ?exibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-?delity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy speci?ed design conditions and missions. The analysis tasks can include off-design mission performance calculation, ?ight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft con?gurations is facilitated, while retaining the capability to model novel and advanced concepts. Speci?c rotorcraft con?gurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-?delity attribute models for a component, as well as addition of new components.

NDARC NASA Design and Analysis of Rotorcraft - Input, Appendix 2

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration exibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tilt-rotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

NDARC NASA Design and Analysis of Rotorcraft. Appendix 6; Input

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2017-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

NDARC NASA Design and Analysis of Rotorcraft

NASA Technical Reports Server (NTRS)

Johnson, Wayne R.

2009-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool intended to support both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility; a hierarchy of models; and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with lowfidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single main-rotor and tailrotor helicopter; tandem helicopter; coaxial helicopter; and tiltrotors. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.

NDARC - NASA Design and Analysis of Rotorcraft

NASA Technical Reports Server (NTRS)

Johnson, Wayne

2015-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail-rotor helicopter, tandem helicopter, coaxial helicopter, and tiltrotor. The architecture of the code accommodates addition of new or higher-fidelity attribute models for a component, as well as addition of new components.