[Not Available].

PubMed

Haza, Marion

2012-08-01

Dans cet article, nous abordons la question de l'accès à la pornographie sur Internet par les adolescents. Nous déclinons plusieurs facettes de ces rencontres: la rencontre «fortuite», quand les adolescents sont confrontés à des images intempestives, des publicités ou spams avec des contenus pornographiques; la rencontre «spectatrice», quand les adolescents cherchent activement des vidéos ou photos mettant en scène la sexualité; et enfin la rencontre «actrice», quand les adolescents se mettent en scène eux-mêmes, seuls ou à plusieurs, de façon pornographique sur le Net. A partir d'exemple, nous réfléchissons aux enjeux de ces rencontres virtuelles précoces de la sexualité adulte par rapport au développement adolescent et à la représentation de leur propre sexualité en construction.

Adolescence et pornographie sur la toile

PubMed Central

Haza, Marion

2012-01-01

Dans cet article, nous abordons la question de l’accès à la pornographie sur Internet par les adolescents. Nous déclinons plusieurs facettes de ces rencontres: la rencontre «fortuite», quand les adolescents sont confrontés à des images intempestives, des publicités ou spams avec des contenus pornographiques; la rencontre «spectatrice», quand les adolescents cherchent activement des vidéos ou photos mettant en scène la sexualité; et enfin la rencontre «actrice», quand les adolescents se mettent en scène eux-mêmes, seuls ou à plusieurs, de façon pornographique sur le Net. A partir d’exemple, nous réfléchissons aux enjeux de ces rencontres virtuelles précoces de la sexualité adulte par rapport au développement adolescent et à la représentation de leur propre sexualité en construction. PMID:22876261

Production of IFN-γ and IL-4 Against Intact Catalase and Constructed Catalase Epitopes of Helicobacter pylori From T-Cells.

PubMed

Ghasemian Safaei, Hajieh; Faghri, Jamshid; Moghim, Sharareh; Nasr Esfahani, Bahram; Fazeli, Hossein; Makvandi, Manoochehr; Adib, Minoo; Rashidi, Niloufar

2015-12-01

Helicobacter pylori infection is highly prevalent in the developing countries. It causes gastritis, peptic ulcer disease, and gastrocarcinoma. Treatment with drugs and antibiotics is problematic due to the following reasons: cost, resistance to antibiotics, prolonged treatment and using multiple drugs. Catalase is highly conserved among the Helicobacter species and is important to the survival of the organism. It is expressed in high amounts and is exposed to the surface of this bacterium; therefore it represents a suitable candidate vaccine antigen. A suitable approach in H. pylori vaccinology is the administration of epitope based vaccines. Therefore the responses of T-cells (IFN-γ and IL-4 production) against the catalase of H. pylori were determined. Then the quality of the immune responses against intact catalase and three epitopes of catalase were compared. In this study, a composition of three epitopes of the H. pylori catalase was selected based on Propred software. The effect of catalase epitopes on T-cells were assayed and immune responses identified. The results of IFN-γ, IL-4 production against antigens, epitopes, and recombinant catalase by T-cells were compared for better understanding of epitope efficiency. The current research demonstrated that epitope sequence stimulates cellular immune responses effectively. In addition, increased safety and potency as well as a reduction in time and cost were advantages of this method. Authors are going to use this sequence as a suitable vaccine candidate for further research on animal models and humans in future.

A BROWN DWARF CENSUS FROM THE SIMP SURVEY

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert, Jasmin; Gagné, Jonathan; Artigau, Étienne

We have conducted a near-infrared (NIR) proper motion survey, the Sondage Infrarouge de Mouvement Propre, in order to discover field ultracool dwarfs (UCD) in the solar neighborhood. The survey was conducted by imaging ∼28% of the sky with the Caméra PAnoramique Proche-InfraRouge both in the southern hemisphere at the Cerro Tololo Inter-American Observatory 1.5 m telescope, and in the northern hemisphere at the Observatoire du Mont-Mégantic 1.6 m telescope and comparing the source positions from these observations with the Two Micron All-Sky Survey Point Source Catalog (2MASS PSC). Additional color criteria were used to further discriminate unwanted astrophysical sources. Wemore » present the results of an NIR spectroscopic follow-up of 169 M, L, and T dwarfs. Among the sources discovered are 2 young field brown dwarfs, 6 unusually red M and L dwarfs, 25 unusually blue M and L dwarfs, 2 candidate unresolved L+T binaries, and 24 peculiar UCDs. Additionally, we add 9 L/T transition dwarfs (L6–T4.5) to the already known objects.« less

A Brown Dwarf Census from the SIMP Survey

NASA Astrophysics Data System (ADS)

Robert, Jasmin; Gagné, Jonathan; Artigau, Étienne; Lafrenière, David; Nadeau, Daniel; Doyon, René; Malo, Lison; Albert, Loïc; Simard, Corinne; Bardalez Gagliuffi, Daniella C.; Burgasser, Adam J.

2016-10-01

We have conducted a near-infrared (NIR) proper motion survey, the Sondage Infrarouge de Mouvement Propre, in order to discover field ultracool dwarfs (UCD) in the solar neighborhood. The survey was conducted by imaging ˜28% of the sky with the Caméra PAnoramique Proche-InfraRouge both in the southern hemisphere at the Cerro Tololo Inter-American Observatory 1.5 m telescope, and in the northern hemisphere at the Observatoire du Mont-Mégantic 1.6 m telescope and comparing the source positions from these observations with the Two Micron All-Sky Survey Point Source Catalog (2MASS PSC). Additional color criteria were used to further discriminate unwanted astrophysical sources. We present the results of an NIR spectroscopic follow-up of 169 M, L, and T dwarfs. Among the sources discovered are 2 young field brown dwarfs, 6 unusually red M and L dwarfs, 25 unusually blue M and L dwarfs, 2 candidate unresolved L+T binaries, and 24 peculiar UCDs. Additionally, we add 9 L/T transition dwarfs (L6-T4.5) to the already known objects.

Not Too Old, Not Too Young: Older Women's Perceptions of Physicians.

PubMed

MacRae, Hazel

2015-12-01

RÉSUMÉ Les femmes plus âgées interagissent avec les médecins plus souvent que les hommes âgés et les personnes plus jeunes; pourtant, la connaissance et la compréhension de leurs expériences avec les médecins sont limitées. Le but de cette étude était d'étudier les perceptions des femmes âgées de leurs interactions avec les médecins et d'identifier ce que les femmes veulent de leurs médecins. Les entrevues en profondeur avec 30 femmes âgées montrent que la majorité veulent être impliquée activement dans leurs propres soins de santé. Dans la relation patient-médecin, les femmes donnent généralement la priorité aux qualités personnelles de médecins et leur comportement à l'égard du patient. Pour de nombreuses femmes, l'âge et le sexe du médecin ont aussi leur importance.

Measurement of the Carbon Isotopic Composition of Methane Using Helicoidal Laser Eigenstates

NASA Astrophysics Data System (ADS)

Jacob, D.; Le Floch, A.; Bretenaker, F.; Guenot, P.

1996-06-01

The spatially generalized Jones matrix formalism is used to design a laser cavity to make intracavity measurements of the carbon isotopic composition of methane. the method is based on a double optical lever effect for helicoidally polarized eigenstates, permitting to measure successively the ^{12}CH_4 and ^{13}CH_4 concentrations. To choose the probed isotope, one simply tunes the frequency of the laser by Zeeman effect. The experiment exhibits a good agreement with the predictions and permits to measure the ^{13}CH4/^{12}CH_4 composition ratio of methane with an uncertainty of the order of ± 0.07% for a sample containing only 6× 10^{-9} mole of methane. On utilise le formalisme des matrices de Jones généralisées spatialement pour concevoir une cavité laser permettant la mesure intra-cavité de la composition isotopique du carbone présent dans le méthane. La méthode est fondée sur une double application de l'effet de levier optique pour les états propres hélicoïdaux, permettant de mesurer successivement les concentrations de ^{12}CH_4 et de ^{13}CH_4. Pour passer d'un isotope à l'autre, on ajuste simplement la fréquence du laser par effet Zeeman. L'expérience est en bon accord avec les prédictions et permet d'effectuer la mesure du rapport isotopique ^{13}CH4/^{12}CH_4 avec une fourchette d'incertitude de ± 0,07% pour des échantillons de gaz ne contenant que 6× 10^{-9} mole de méthane.

Elaboration d'un plan de transition et de mise en oeuvre pour ameliorer la gestion de l'obsolescence dans une entreprise du secteur aeronautique =

NASA Astrophysics Data System (ADS)

Conrad, Heloise

L'evolution technologique des composants electroniques entraine des problemes de gestion de l'obsolescence dans le secteur aeronautique. Les systemes aeronautiques ont en effet des durees de vie nettement superieures aux composants qu'ils contiennent. Cette difference de duree de vie et les normes strictes propres a l'aeronautique obligent les constructeurs a mettre en place une gestion efficace de l'obsolescence pour eviter les couts supplementaires de maintenance et de retards. De plus, a cause des faibles volumes de production qu'ils representent, les constructeurs aeronautiques n'ont que peu de controle sur leur chaine d'approvisionnement. La litterature offre beaucoup d'etudes sur l'obsolescence, appliquees a l'aeronautique. Les auteurs recommandent de mettre en place des processus de gestion et de prevision de l'obsolescence, et de construire des relations de collaboration avec leurs fournisseurs, qui ont plus de visibilite sur la chaine d'approvisionnement. Cette recherche presente d'abord l'elaboration d'une liste de criteres de bonne gestion de l'obsolescence, ainsi que la creation d'une methode de generation de plan de transition et de mise en oeuvre de l'amelioration de la gestion et de la prevision de l'obsolescence pour un cas concret. La methode est creee pour un manufacturier aeronautique ne possedant pas de systemes de gestion proactive ou de prevision de l'obsolescence. La creation de la methode s'est faite en suivant la methodologie de la science de la conception, en impliquant les employes concernes par la gestion de l'obsolescence. La methode comporte douze (12) etapes, amenant au developpement du plan de transition et de mise en oeuvre. Pour applique la methode, divers entretiens individuels et de groupe ont ete realises. Ces entretiens ont aussi permis de lister les criteres de gestion et de prevision efficaces de l'obsolescence. Cette liste a ete comparee avec les criteres issus de la litterature. En respect des besoins enonces par les employes et des conseils d'un industriel expert en obsolescence des composants avioniques, le plan de transition et de mise en oeuvre cree se divise en trois (3) phases : 1) amelioration de la gestion de l'obsolescence, 2) amelioration de la prevision de l'obsolescence et 3) gestion des fournisseurs. Meme si le plan de transition n'a pas ete applique dans l'entreprise partenaire, la methode et le plan cree ont ete approuves par les employes et utilisateurs.

Supercritical impregnation and optical characterization of loaded foldable intraocular lenses using supercritical fluids.

PubMed

Bouledjouidja, Abir; Masmoudi, Yasmine; Li, Yanfeng; He, Wei; Badens, Elisabeth

2017-10-01

To prepare drug-loaded intraocular lenses (IOLs) used to combine cataract surgery with postoperative complication treatment through supercritical impregnation while preserving their optical properties. Aix-Marseille Université, CNRS, Centrale Marseille, Laboratoire de Mécanique, Modélisation & Procédés Propres, Marseille, France, and He University Eye Hospital, Liaoning Province, China. Experimental study. Supercritical impregnations of commercial foldable IOLs used in cataract surgery with ciprofloxacin (an antibiotic) and dexamethasone 21-phosphate disodium salt (an antiinflammatory drug) were performed in a noncontinuous mode. Impregnation amounts were determined through drug-release kinetic studies. The optical characterizations of IOLs were determined by evaluating the dioptric power and the imaging quality by determining the modulating transfer function (MTF) at a specified spatial frequency according to the International Organization for Standardization (ISO 11979-2:2014). Transparent IOLs presenting an effective impregnation were obtained with a prolonged drug delivery during approximately 10 days. Optical characterizations (dioptric powers and MTF values) show preserved optical properties after supercritical treatment/impregnation. Supercritical treatments/impregnations do not damage the optical properties of IOLs and are therefore adequate for the preparation of delivery devices used for cataract surgery. Copyright © 2017. Published by Elsevier Inc.

Terrorism--a (self) love story: redirecting the significance quest can end violence.

PubMed

Kruglanski, Arie W; Bélanger, Jocelyn J; Gelfand, Michele; Gunaratna, Rohan; Hettiarachchi, Malkanthi; Reinares, Fernando; Orehek, Edward; Sasota, Jo; Sharvit, Keren

2013-10-01

Jean-Jacques Rousseau's concepts of self-love (amour propre) and love of self (amour de soi même) are applied to the psychology of terrorism. Self-love is concern with one's image in the eyes of respected others, members of one's group. It denotes one's feeling of personal significance, the sense that one's life has meaning in accordance with the values of one's society. Love of self, in contrast, is individualistic concern with self-preservation, comfort, safety, and the survival of self and loved ones. We suggest that self-love defines a motivational force that when awakened arouses the goal of a significance quest. When a group perceives itself in conflict with dangerous detractors, its ideology may prescribe violence and terrorism against the enemy as a means of significance gain that gratifies self-love concerns. This may involve sacrificing one's self-preservation goals, encapsulated in Rousseau's concept of love of self. The foregoing notions afford the integration of diverse quantitative and qualitative findings on individuals' road to terrorism and back. Understanding the significance quest and the conditions of its constructive fulfillment may be crucial to reversing the current tide of global terrorism. PsycINFO Database Record (c) 2013 APA, all rights reserved

Les soins aux enfants et aux adolescents des familles des militaires canadiens : les considérations particulières

PubMed Central

Rowan-Legg, Anne

2017-01-01

Résumé Les familles des militaires font face à de nombreux facteurs de stress, tels que les réinstallations fréquentes, les longues pério des de séparation familiale, l’isolement géographique du réseau de soutien de la famille élargie et le déploiement en zones très dangereuses. Les enfants et les adolescents des familles des militaires vivent les mêmes trajectoires développementales et motivationnelles que leurs homologues civils, mais ils sont également aux prises avec des pressions et des facteurs de stress liés à leur développement qui sont inhabituels et qui leur sont imposés par les exigences de la vie militaire. Les effets de la vie militaire sur les familles et les enfants commencent à être admis et mieux caractérisés. Il est essentiel de comprendre les préoccupations propres aux enfants et aux adolescents des familles des militaires et de mobiliser les ressources nécessaires pour les soutenir afin de répondre à leurs besoins en matière de santé.

Screening and structure-based modeling of T-cell epitopes of Nipah virus proteome: an immunoinformatic approach for designing peptide-based vaccine.

PubMed

Kamthania, Mohit; Sharma, D K

2015-12-01

Identification of Nipah virus (NiV) T-cell-specific antigen is urgently needed for appropriate diagnostic and vaccination. In the present study, prediction and modeling of T-cell epitopes of Nipah virus antigenic proteins nucleocapsid, phosphoprotein, matrix, fusion, glycoprotein, L protein, W protein, V protein and C protein followed by the binding simulation studies of predicted highest binding scorers with their corresponding MHC class I alleles were done. Immunoinformatic tool ProPred1 was used to predict the promiscuous MHC class I epitopes of viral antigenic proteins. The molecular modelings of the epitopes were done by PEPstr server. And alleles structure were predicted by MODELLER 9.10. Molecular dynamics (MD) simulation studies were performed through the NAMD graphical user interface embedded in visual molecular dynamics. Epitopes VPATNSPEL, NPTAVPFTL and LLFVFGPNL of Nucleocapsid, V protein and Fusion protein have considerable binding energy and score with HLA-B7, HLA-B*2705 and HLA-A2MHC class I allele, respectively. These three predicted peptides are highly potential to induce T-cell-mediated immune response and are expected to be useful in designing epitope-based vaccines against Nipah virus after further testing by wet laboratory studies.

La santé des Premières nations, des Inuits et des Métis: les facteurs que doivent envisager les leaders en santé canadiens dans la foulée du rapport de la Commission de vérité et réconciliation du Canada.

PubMed

McNally, Mary; Martin, Debbie

2017-03-01

Les peuples des Premières nations, inuits et métis qui habitent au Canada sont aux prises avec de profondes disparités en matière de santé par rapport aux Canadiens non autochtones, et ce, dans presque toutes les mesures liées à la santé et au bien-être. Pour faire progresser les services de santé auprès des peuples autochtones, il faut passer à l'action dans tous les ordres de prestation des soins et des politiques en santé. Il est donc essentiel que les leaders et les prestataires des établissements, des systèmes et des installations de santé du Canada comprennent et prennent en main les déterminants de la santé propres aux peuples autochtones, y compris l'héritage du colonialisme et le racisme ancien et actuel. La Commission de vérité et réconciliation du Canada est le point de départ pour réagir de manière positive aux injustices.

Method for technology-delivered healthcare measures.

PubMed

Kramer-Jackman, Kelli Lee; Popkess-Vawter, Sue

2011-12-01

Current healthcare literature lacks development and evaluation methods for research and practice measures administered by technology. Researchers with varying levels of informatics experience are developing technology-delivered measures because of the numerous advantages they offer. Hasty development of technology-delivered measures can present issues that negatively influence administration and psychometric properties. The Method for Technology-delivered Healthcare Measures is designed to systematically guide the development and evaluation of technology-delivered measures. The five-step Method for Technology-delivered Healthcare Measures includes establishment of content, e-Health literacy, technology delivery, expert usability, and participant usability. Background information and Method for Technology-delivered Healthcare Measures steps are detailed.

Technology Alignment and Portfolio Prioritization (TAPP)

NASA Technical Reports Server (NTRS)

Funaro, Gregory V.; Alexander, Reginald A.

2015-01-01

Technology Alignment and Portfolio Prioritization (TAPP) is a method being developed by the Advanced Concepts Office, at NASA Marshall Space Flight Center. The TAPP method expands on current technology assessment methods by incorporating the technological structure underlying technology development, e.g., organizational structures and resources, institutional policy and strategy, and the factors that motivate technological change. This paper discusses the methods ACO is currently developing to better perform technology assessments while taking into consideration Strategic Alignment, Technology Forecasting, and Long Term Planning.

Environmental life cycle assessment of methanol and electricity co-production system based on coal gasification technology.

PubMed

Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam

2017-01-01

This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process. Copyright © 2016 Elsevier B.V. All rights reserved.

[On the question of a practice.].

PubMed

Sévigny, R

1979-01-01

The author, a psycho-sociologist and a professor in the department of sociology at l'Université de Montreal, looks back and reflects on his practice as an intervener in different types of groups. He returns to his first experiences with T-groups and to the analysis of them which he made at the beginning of his practice. Furthermore, this analysis touches on questions that remain very relevant. Thus the author explains why, for social reasons, he came to privilege work with "real groups" rather than that with spontaneous groups. On the basis of twenty years of experience and a view of many group approaches it can be asked whether the question of man in society as a change agent should not be posed to a greater extent within groups. 1) Dans Sociologie A Sociétés, vol. 9, no 2, d'octobre 1977, le lecteur trouvera un article de moi qui préserve une réflexion plus systématique mais sans référence immédiate à ma propre pratique. Oe numéro, entièrement consacré au thème "psychologie, sociologie, intervention" comprend également plusieurs textes qui ne sont pas étrangers à certains thèmes développés ici. On y trouvera aussi de nombreuses références bibliographiques.

Élaboration d'un bronze Cu-8%Sn fritté sous pression et l'étude de son aptitude à l'absorption

NASA Astrophysics Data System (ADS)

Loucif, K.; Keraghel, F.; Alem, S.

2005-05-01

L'introduction des píeces miniatures dans le domaine de l'informatique et la microélectronique nécessite une grande précision et un environnement propre. D'autre part, la conservation d'énergie exige des pièces légères et une bonne longévité. Pour résoudre ces problèmes, des pièces autolubrifiées ont été proposées. En effet, plusieurs disciplines peuvent s'ingérer pour élaborer ces pièces: la métallurgie des poudres pour produire des pièces poreuses, la tribologie pour caractériser la pièce en fonctionnement et la mécanique des fluides pour évaluer le comportement échantillon -lubrifiant.
Dans ce présent travail, nous présentons l'évolution de la densité des échantillons élaborés en fonction de: la température d'élaboration, la pression de compactage, et le temps de maintien et l'évolution de l'absorption des lubrifiants par un alliage Cu-8% Sn fritté sous pression. Les lubrifiants choisis sont l'eau et une huile de machine à usage domestique et leur aptitude à l'autolubrification.

Décontamination nucléaire par laser UV

NASA Astrophysics Data System (ADS)

Delaporte, Ph.; Gastaud, M.; Marine, W.; Sentis, M.; Uteza, O.; Thouvenot, P.; Alcaraz, J. L.; Le Samedy, J. M.; Blin, D.

2003-06-01

Le développement et l'utilisation de procédés propres pour le nettoyage ou la préparation de surfaces est l'une des priorités du milieu industriel. Cet intérêt est d'autant plus grand dans le domaine du nucléaire pour lequel la réduction des déchets est un axe de recherche important. Un dispositif de décontamination nucléaire par laser UV impulsionnel a été développé et testé. Il est composé. d'un laser à excimères de 1kW, d'un faisceau de fibres optiques et d'un dispositif de récupération des particules. Les essais réalisés en milieu actif ont démontré sa capacité à nettoyer des surfaces métalliques polluées par différents radioéléments avec des facteurs de décontamination généralement supérieurs à 10. Ce dispositif permet de décontaminer de grandes surfaces de géométrie simple en réduisant fortement la génération de déchets secondaires. Il est, à ce jour et dans ces conditions d'utilisations, le procédé de décontamination par voie sèche le plus efficace.

Methods and Technologies Branch (MTB)

Cancer.gov

The Methods and Technologies Branch focuses on methods to address epidemiologic data collection, study design and analysis, and to modify technological approaches to better understand cancer susceptibility.

Identifying Advanced Technologies for Education's Future.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; Yin, Robert K.

A study to determine how three advanced technologies might be applied to the needs of special education students helped inspire the development of a new method for identifying such applications. This new method, named the "Hybrid Approach," combines features of the two traditional methods: technology-push and demand-pull. Technology-push involves…

Technological Literacy for Students Aged 6-18: A New Method for Holistic Measuring of Knowledge, Capabilities, Critical Thinking and Decision-Making

ERIC Educational Resources Information Center

Avsec, Stanislav; Jamšek, Janez

2016-01-01

Technological literacy is identified as a vital achievement of technology- and engineering-intensive education. It guides the design of technology and technical components of educational systems and defines competitive employment in technological society. Existing methods for measuring technological literacy are incomplete or complicated,…

Formal methods technology transfer: Some lessons learned

NASA Technical Reports Server (NTRS)

Hamilton, David

1992-01-01

IBM has a long history in the application of formal methods to software development and verification. There have been many successes in the development of methods, tools and training to support formal methods. And formal methods have been very successful on several projects. However, the use of formal methods has not been as widespread as hoped. This presentation summarizes several approaches that have been taken to encourage more widespread use of formal methods, and discusses the results so far. The basic problem is one of technology transfer, which is a very difficult problem. It is even more difficult for formal methods. General problems of technology transfer, especially the transfer of formal methods technology, are also discussed. Finally, some prospects for the future are mentioned.

Technology selection for ballast water treatment by multi-stakeholders: A multi-attribute decision analysis approach based on the combined weights and extension theory.

PubMed

Ren, Jingzheng

2018-01-01

This objective of this study is to develop a generic multi-attribute decision analysis framework for ranking the technologies for ballast water treatment and determine their grades. An evaluation criteria system consisting of eight criteria in four categories was used to evaluate the technologies for ballast water treatment. The Best-Worst method, which is a subjective weighting method and Criteria importance through inter-criteria correlation method, which is an objective weighting method, were combined to determine the weights of the evaluation criteria. The extension theory was employed to prioritize the technologies for ballast water treatment and determine their grades. An illustrative case including four technologies for ballast water treatment, i.e. Alfa Laval (T 1 ), Hyde (T 2 ), Unitor (T 3 ), and NaOH (T 4 ), were studied by the proposed method, and the Hyde (T 2 ) was recognized as the best technology. Sensitivity analysis was also carried to investigate the effects of the combined coefficients and the weights of the evaluation criteria on the final priority order of the four technologies for ballast water treatment. The sum weighted method and the TOPSIS was also employed to rank the four technologies, and the results determined by these two methods are consistent to that determined by the proposed method in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Perovskite Technology is Scalable, But Questions Remain about the Best

Science.gov Websites

Methods | News | NREL Perovskite Technology is Scalable, But Questions Remain about the Best Methods News Release: Perovskite Technology is Scalable, But Questions Remain about the Best Methods NREL be used on a larger surface. The NREL researchers examined potential scalable deposition methods

Laser-based standoff detection of explosives: a critical review.

PubMed

Wallin, Sara; Pettersson, Anna; Ostmark, Henric; Hobro, Alison

2009-09-01

A review of standoff detection technologies for explosives has been made. The review is focused on trace detection methods (methods aiming to detect traces from handling explosives or the vapours surrounding an explosive charge due to the vapour pressure of the explosive) rather than bulk detection methods (methods aiming to detect the bulk explosive charge). The requirements for standoff detection technologies are discussed. The technologies discussed are mostly laser-based trace detection technologies, such as laser-induced-breakdown spectroscopy, Raman spectroscopy, laser-induced-fluorescence spectroscopy and IR spectroscopy but the bulk detection technologies millimetre wave imaging and terahertz spectroscopy are also discussed as a complement to the laser-based methods. The review includes novel techniques, not yet tested in realistic environments, more mature technologies which have been tested outdoors in realistic environments as well as the most mature millimetre wave imaging technique.

A Systematic Method of Integrating BIM and Sensor Technology for Sustainable Construction Design

NASA Astrophysics Data System (ADS)

Liu, Zhen; Deng, Zhiyu

2017-10-01

Building Information Modeling (BIM) has received lots of attention of construction field, and sensor technology was applied in construction data collection. This paper developed a method to integrate BIM and sensor technology for sustainable construction design. A brief literature review was conducted to clarify the current development of BIM and sensor technology; then a systematic method for integrating BIM and sensor technology to realize sustainable construction design was put forward; finally a brief discussion and conclusion was given.

Concerns of Teacher Education Methods Instructors and Strategies for Integrating Technology into Methods Courses

ERIC Educational Resources Information Center

Kim, Miri

2005-01-01

The goal of this dissertation is to clarify the perceptions and concerns that methods faculty at a university located in the Midwest have about integrating instructional technology into their courses along with their current use of technology. Ultimately, this study aims to generate strategies to support methods instructors in their efforts to…

Qualitative Research Methods in Education and Educational Technology. Research Methods for Educational Technology

ERIC Educational Resources Information Center

Willis, Jerry W.

2008-01-01

"Qualitative Research Methods in Education and Educational Technology" was written for students and scholars interested in exploring the many qualitative methods developed over the last 50 years in the social sciences. The book does not stop, however, at the boundaries of the social sciences. Social scientists now consume and use research methods…

Methods and Applications for Advancing Distance Education Technologies: International Issues and Solutions

ERIC Educational Resources Information Center

Syed, Mahbubur Rahman, Ed.

2009-01-01

The emerging field of advanced distance education delivers academic courses across time and distance, allowing educators and students to participate in a convenient learning method. "Methods and Applications for Advancing Distance Education Technologies: International Issues and Solutions" demonstrates communication technologies, intelligent…

[An Introduction to Methods for Evaluating Health Care Technology].

PubMed

Lee, Ting-Ting

2015-06-01

The rapid and continual advance of healthcare technology makes ensuring that this technology is used effectively to achieve its original goals a critical issue. This paper presents three methods that may be applied by healthcare professionals in the evaluation of healthcare technology. These methods include: the perception/experiences of users, user work-pattern changes, and chart review or data mining. The first method includes two categories: using interviews to explore the user experience and using theory-based questionnaire surveys. The second method applies work sampling to observe the work pattern changes of users. The last method conducts chart reviews or data mining to analyze the designated variables. In conclusion, while evaluative feedback may be used to improve the design and development of healthcare technology applications, the informatics competency and informatics literacy of users may be further explored in future research.

Past speculations of the future: a review of the methods used for forecasting emerging health technologies

PubMed Central

Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

2016-01-01

Objectives Forecasting can support rational decision-making around the introduction and use of emerging health technologies and prevent investment in technologies that have limited long-term potential. However, forecasting methods need to be credible. We performed a systematic search to identify the methods used in forecasting studies to predict future health technologies within a 3–20-year timeframe. Identification and retrospective assessment of such methods potentially offer a route to more reliable prediction. Design Systematic search of the literature to identify studies reported on methods of forecasting in healthcare. Participants People are not needed in this study. Data sources The authors searched MEDLINE, EMBASE, PsychINFO and grey literature sources, and included articles published in English that reported their methods and a list of identified technologies. Main outcome measure Studies reporting methods used to predict future health technologies within a 3–20-year timeframe with an identified list of individual healthcare technologies. Commercially sponsored reviews, long-term futurology studies (with over 20-year timeframes) and speculative editorials were excluded. Results 15 studies met our inclusion criteria. Our results showed that the majority of studies (13/15) consulted experts either alone or in combination with other methods such as literature searching. Only 2 studies used more complex forecasting tools such as scenario building. Conclusions The methodological fundamentals of formal 3–20-year prediction are consistent but vary in details. Further research needs to be conducted to ascertain if the predictions made were accurate and whether accuracy varies by the methods used or by the types of technologies identified. PMID:26966060

Future Technology Workshop: A Collaborative Method for the Design of New Learning Technologies and Activities

ERIC Educational Resources Information Center

Vavoula, Giasemi N.; Sharples, Mike

2007-01-01

We describe the future technology workshop (FTW), a method whereby people with everyday knowledge or experience in a specific area of technology use (such as using digital cameras) envision and design the interactions between current and future technology and activity. Through a series of structured workshop sessions, participants collaborate to…

Les biofilms bactériens : leur importance en santé animale et en santé publique

PubMed Central

Tremblay, Yannick D.N.; Hathroubi, Skander; Jacques, Mario

2014-01-01

Résumé Les biofilms bactériens sont des amas structurés de cellules bactériennes enrobés d’une matrice polymérique et attachés à une surface. Le biofilm protège les bactéries et leur permet de survivre dans des conditions environnementales hostiles. Les bactéries du biofilm peuvent résister à la réponse immunitaire de l’hôte et sont beaucoup plus résistantes aux antibiotiques et aux désinfectants que les cellules bactériennes planctoniques. La capacité de former un biofilm est maintenant reconnue comme une caractéristique propre à plusieurs microorganismes. La présence de biofilms lors d’infections demande donc de nouvelles méthodes de prévention, de diagnostic et de traitement. De même, la présence de biofilms sur des surfaces retrouvées à la ferme, à l’abattoir ou à l’usine de transformation affectera l’efficacité du protocole de désinfection. De façon surprenante, la formation de biofilms chez les bactéries pathogènes des animaux et les bactéries zoonotiques est un sujet relativement peu étudié. Ce bref compte rendu a pour objectif de sensibiliser les intervenants en santé animale à l’importance des biofilms. PMID:24688172

Estimation of a Preference-Based Summary Score for the Patient-Reported Outcomes Measurement Information System: The PROMIS®-Preference (PROPr) Scoring System.

PubMed

Dewitt, Barry; Feeny, David; Fischhoff, Baruch; Cella, David; Hays, Ron D; Hess, Rachel; Pilkonis, Paul A; Revicki, Dennis A; Roberts, Mark S; Tsevat, Joel; Yu, Lan; Hanmer, Janel

2018-06-01

Health-related quality of life (HRQL) preference-based scores are used to assess the health of populations and patients and for cost-effectiveness analyses. The National Institutes of Health Patient-Reported Outcomes Measurement Information System (PROMIS ® ) consists of patient-reported outcome measures developed using item response theory. PROMIS is in need of a direct preference-based scoring system for assigning values to health states. To produce societal preference-based scores for 7 PROMIS domains: Cognitive Function-Abilities, Depression, Fatigue, Pain Interference, Physical Function, Sleep Disturbance, and Ability to Participate in Social Roles and Activities. Online survey of a US nationally representative sample ( n = 983). Preferences for PROMIS health states were elicited with the standard gamble to obtain both single-attribute scoring functions for each of the 7 PROMIS domains and a multiplicative multiattribute utility (scoring) function. The 7 single-attribute scoring functions were fit using isotonic regression with linear interpolation. The multiplicative multiattribute summary function estimates utilities for PROMIS multiattribute health states on a scale where 0 is the utility of being dead and 1 the utility of "full health." The lowest possible score is -0.022 (for a state viewed as worse than dead), and the highest possible score is 1. The online survey systematically excludes some subgroups, such as the visually impaired and illiterate. A generic societal preference-based scoring system is now available for all studies using these 7 PROMIS health domains.

SITE TECHNOLOGY CAPSULE: FILTER FLOW TECHNOLOGY, INC. - COLLOID POLISHING FILTER METHOD

EPA Science Inventory

The Filter Flow Technology, Inc. (FFT) Coloid Polishing Filter Method (CPFM) was demonstrated at the U.S Department of Energy's (DOE) Rock Flats Plant (RFP) as part of the U.S. Environmental Protection Agency's (EPA) Superfund and Innovative Technology Evaluation (SITE) program. ...

Development of salt production technology using prism greenhouse method

NASA Astrophysics Data System (ADS)

Guntur, G.; Jaziri, A. A.; Prihanto, A. A.; Arisandi, D. M.; Kurniawan, A.

2018-01-01

The main problem of salt production in Indonesia is low productivity and quality because the technology used commonly by Indonesian salt farmers is traditional method. This research aims to increase production of salt by using the prism greenhouse method. The prism greenhouse method is a salt production system with a combination of several salt production technologies, including geomembrane, threaded filter, and prism greenhouse technology. This research method used descriptive method. The results of this study were the productivity increased threefold, and the quality of salt produced also increased in terms of the content of NaCl from 85% to 95%. In addition, salt production with the prism greenhouse method has several advantages, such as faster harvest time, weather resistance, easy to use, and higher profit than traditional methods.

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

PubMed

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

Approaches to Research on Teacher Education and Technology. Society for Technology and Teacher Education Monograph Series. No. 1.

ERIC Educational Resources Information Center

Waxman, Hersholt C., Ed.; Bright, George W., Ed.

This document addresses the use of technology to enrich education. Twelve papers discuss research programs and perspectives and methods of research in technology and teacher education. Titles are: "Research Methods and Paradigms in Technology and Teacher Education" (Hersholt C. Waxman and George W. Bright); "Past and Future Stages in Educational…

Integrating technology into radiologic science education.

PubMed

Wertz, Christopher Ira; Hobbs, Dan L; Mickelsen, Wendy

2014-01-01

To review the existing literature pertaining to the current learning technologies available in radiologic science education and how to implement those technologies. Only articles from peer-reviewed journals and scholarly reports were used in the research for this review. The material was further restricted to those articles that emphasized using new learning technologies in education, with a focus on radiologic science education. Teaching in higher education is shifting from a traditional classroom-based lecture format to one that incorporates new technologies that allow for more varied and diverse educational models. Radiologic technology educators must adapt traditional education delivery methods to incorporate current technologies. Doing so will help engage the modern student in education in ways in which they are already familiar. As students' learning methods change, so must the methods of educational delivery. The use of new technologies has profound implications for education. If implemented properly, these technologies can be effective tools to help educators.

Research and development of LANDSAT-based crop inventory techniques

NASA Technical Reports Server (NTRS)

Horvath, R.; Cicone, R. C.; Malila, W. A. (Principal Investigator)

1982-01-01

A wide spectrum of technology pertaining to the inventory of crops using LANDSAT without in situ training data is addressed. Methods considered include Bayesian based through-the-season methods, estimation technology based on analytical profile fitting methods, and expert-based computer aided methods. Although the research was conducted using U.S. data, the adaptation of the technology to the Southern Hemisphere, especially Argentina was considered.

Past speculations of the future: a review of the methods used for forecasting emerging health technologies.

PubMed

Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

2016-03-10

Forecasting can support rational decision-making around the introduction and use of emerging health technologies and prevent investment in technologies that have limited long-term potential. However, forecasting methods need to be credible. We performed a systematic search to identify the methods used in forecasting studies to predict future health technologies within a 3-20-year timeframe. Identification and retrospective assessment of such methods potentially offer a route to more reliable prediction. Systematic search of the literature to identify studies reported on methods of forecasting in healthcare. People are not needed in this study. The authors searched MEDLINE, EMBASE, PsychINFO and grey literature sources, and included articles published in English that reported their methods and a list of identified technologies. Studies reporting methods used to predict future health technologies within a 3-20-year timeframe with an identified list of individual healthcare technologies. Commercially sponsored reviews, long-term futurology studies (with over 20-year timeframes) and speculative editorials were excluded. 15 studies met our inclusion criteria. Our results showed that the majority of studies (13/15) consulted experts either alone or in combination with other methods such as literature searching. Only 2 studies used more complex forecasting tools such as scenario building. The methodological fundamentals of formal 3-20-year prediction are consistent but vary in details. Further research needs to be conducted to ascertain if the predictions made were accurate and whether accuracy varies by the methods used or by the types of technologies identified. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Solid-State Nanopore.

PubMed

Yuan, Zhishan; Wang, Chengyong; Yi, Xin; Ni, Zhonghua; Chen, Yunfei; Li, Tie

2018-02-20

Solid-state nanopore has captured the attention of many researchers due to its characteristic of nanoscale. Now, different fabrication methods have been reported, which can be summarized into two broad categories: "top-down" etching technology and "bottom-up" shrinkage technology. Ion track etching method, mask etching method chemical solution etching method, and high-energy particle etching and shrinkage method are exhibited in this report. Besides, we also discussed applications of solid-state nanopore fabrication technology in DNA sequencing, protein detection, and energy conversion.

Solid-State Nanopore

NASA Astrophysics Data System (ADS)

Yuan, Zhishan; Wang, Chengyong; Yi, Xin; Ni, Zhonghua; Chen, Yunfei; Li, Tie

2018-02-01

Solid-state nanopore has captured the attention of many researchers due to its characteristic of nanoscale. Now, different fabrication methods have been reported, which can be summarized into two broad categories: "top-down" etching technology and "bottom-up" shrinkage technology. Ion track etching method, mask etching method chemical solution etching method, and high-energy particle etching and shrinkage method are exhibited in this report. Besides, we also discussed applications of solid-state nanopore fabrication technology in DNA sequencing, protein detection, and energy conversion.

Method for Expressing Public Opinions Concerning the Introduction of an Emerging Technology to Society

NASA Astrophysics Data System (ADS)

Yamamoto, Satoshi; Ito, Kyoko; Ohnishi, Satoshi; Nishida, Shogo

Emerging technology may have considerable social impact. Because emerging technology has not yet been introduced in society, it is needed general public express its opinions on emerging technology. It is important that expressing opinion must have social spirit. A method to limit facility of the Internet and activate social spirit is proposed. Evaluation experiment were conducted to test the effectiveness of the proposed method, and the participant could express opinion with social spirit.

Making Technology Ready: Integrated Systems Health Management

NASA Technical Reports Server (NTRS)

Malin, Jane T.; Oliver, Patrick J.

2007-01-01

This paper identifies work needed by developers to make integrated system health management (ISHM) technology ready and by programs to make mission infrastructure ready for this technology. This paper examines perceptions of ISHM technologies and experience in legacy programs. Study methods included literature review and interviews with representatives of stakeholder groups. Recommendations address 1) development of ISHM technology, 2) development of ISHM engineering processes and methods, and 3) program organization and infrastructure for ISHM technology evolution, infusion and migration.

Review in Strengthening Technology for Phytoremediation of Soil Contaminated by Heavy Metals

NASA Astrophysics Data System (ADS)

Wu, Chishan; Zhang, Xingfeng; Deng, Yang

2017-07-01

In view of current problems of phytoremediation technology, this paper summarizes research progress for phytoremediation technology of heavy metal contaminated soil. When the efficiency of phytoremediation may not meet the demand in practice of contaminated soil or water. Effective measures should be taken to improve the plant uptake and translocation. This paper focuses on strengthening technology mechanism, which can not only increase the biomass of plant and hyperaccumulators, but also enhance the tolerance and resistance to heavy metals, and application effect of phytoremediation, including agronomic methods, earthworm bioremediation and chemical induction technology. In the end of paper, deficiencies of each methods also be discussed, methods of strengthening technology for phytoremediation need further research.

Safe Life Propulsion Design Technologies (3rd Generation Propulsion Research and Technology)

NASA Technical Reports Server (NTRS)

Ellis, Rod

2000-01-01

The tasks outlined in this viewgraph presentation on safe life propulsion design technologies (third generation propulsion research and technology) include the following: (1) Ceramic matrix composite (CMC) life prediction methods; (2) Life prediction methods for ultra high temperature polymer matrix composites for reusable launch vehicle (RLV) airframe and engine application; (3) Enabling design and life prediction technology for cost effective large-scale utilization of MMCs and innovative metallic material concepts; (4) Probabilistic analysis methods for brittle materials and structures; (5) Damage assessment in CMC propulsion components using nondestructive characterization techniques; and (6) High temperature structural seals for RLV applications.

Perceptions and Practices of Technology Student Association Advisors on Implementation Strategies and Teaching Methods

ERIC Educational Resources Information Center

Haynie, W. J.; DeLuca, V. W.; Matthews, B.

2005-01-01

A study conducted in 1989 surveyed Technology Student Association (TSA) advisors to find their perceptions concerning characteristics of technology education programs with a TSA component and the relationship between participation in co-curricular organizations and the teaching methods used by TSA technology teachers (DeLuca & Haynie, 1991).…

Developing and Evaluating a Technology Enhanced Interaction Framework and Method That Can Enhance the Accessibility of Mobile Learning

ERIC Educational Resources Information Center

Angkananon, Kewalin; Wald, Mike; Gilbert, Lester

2014-01-01

This paper focuses on the development and evaluation of a Technology Enhanced Interaction Framework and Method that can help with designing accessible mobile learning interactions involving disabled people. This new framework and method were developed to help design technological support for communication and interactions between people,…

Statistical assessment of the learning curves of health technologies.

PubMed

Ramsay, C R; Grant, A M; Wallace, S A; Garthwaite, P H; Monk, A F; Russell, I T

2001-01-01

(1) To describe systematically studies that directly assessed the learning curve effect of health technologies. (2) Systematically to identify 'novel' statistical techniques applied to learning curve data in other fields, such as psychology and manufacturing. (3) To test these statistical techniques in data sets from studies of varying designs to assess health technologies in which learning curve effects are known to exist. METHODS - STUDY SELECTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): For a study to be included, it had to include a formal analysis of the learning curve of a health technology using a graphical, tabular or statistical technique. METHODS - STUDY SELECTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): For a study to be included, it had to include a formal assessment of a learning curve using a statistical technique that had not been identified in the previous search. METHODS - DATA SOURCES: Six clinical and 16 non-clinical biomedical databases were searched. A limited amount of handsearching and scanning of reference lists was also undertaken. METHODS - DATA EXTRACTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): A number of study characteristics were abstracted from the papers such as study design, study size, number of operators and the statistical method used. METHODS - DATA EXTRACTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): The new statistical techniques identified were categorised into four subgroups of increasing complexity: exploratory data analysis; simple series data analysis; complex data structure analysis, generic techniques. METHODS - TESTING OF STATISTICAL METHODS: Some of the statistical methods identified in the systematic searches for single (simple) operator series data and for multiple (complex) operator series data were illustrated and explored using three data sets. The first was a case series of 190 consecutive laparoscopic fundoplication procedures performed by a single surgeon; the second was a case series of consecutive laparoscopic cholecystectomy procedures performed by ten surgeons; the third was randomised trial data derived from the laparoscopic procedure arm of a multicentre trial of groin hernia repair, supplemented by data from non-randomised operations performed during the trial. RESULTS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: Of 4571 abstracts identified, 272 (6%) were later included in the study after review of the full paper. Some 51% of studies assessed a surgical minimal access technique and 95% were case series. The statistical method used most often (60%) was splitting the data into consecutive parts (such as halves or thirds), with only 14% attempting a more formal statistical analysis. The reporting of the studies was poor, with 31% giving no details of data collection methods. RESULTS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: Of 9431 abstracts assessed, 115 (1%) were deemed appropriate for further investigation and, of these, 18 were included in the study. All of the methods for complex data sets were identified in the non-clinical literature. These were discriminant analysis, two-stage estimation of learning rates, generalised estimating equations, multilevel models, latent curve models, time series models and stochastic parameter models. In addition, eight new shapes of learning curves were identified. RESULTS - TESTING OF STATISTICAL METHODS: No one particular shape of learning curve performed significantly better than another. The performance of 'operation time' as a proxy for learning differed between the three procedures. Multilevel modelling using the laparoscopic cholecystectomy data demonstrated and measured surgeon-specific and confounding effects. The inclusion of non-randomised cases, despite the possible limitations of the method, enhanced the interpretation of learning effects. CONCLUSIONS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: The statistical methods used for assessing learning effects in health technology assessment have been crude and the reporting of studies poor. CONCLUSIONS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: A number of statistical methods for assessing learning effects were identified that had not hitherto been used in health technology assessment. There was a hierarchy of methods for the identification and measurement of learning, and the more sophisticated methods for both have had little if any use in health technology assessment. This demonstrated the value of considering fields outside clinical research when addressing methodological issues in health technology assessment. CONCLUSIONS - TESTING OF STATISTICAL METHODS: It has been demonstrated that the portfolio of techniques identified can enhance investigations of learning curve effects. (ABSTRACT TRUNCATED)

77 FR 48733 - Transitional Program for Covered Business Method Patents-Definitions of Covered Business Method...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

... Office 37 CFR Part 42 Transitional Program for Covered Business Method Patents--Definitions of Covered Business Method Patent and Technological Invention; Final Rule #0;#0;Federal Register / Vol. 77 , No. 157... Business Method Patents-- Definitions of Covered Business Method Patent and Technological Invention AGENCY...

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

PubMed

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

System approach to modeling of industrial technologies

NASA Astrophysics Data System (ADS)

Toropov, V. S.; Toropov, E. S.

2018-03-01

The authors presented a system of methods for modeling and improving industrial technologies. The system consists of information and software. The information part is structured information about industrial technologies. The structure has its template. The template has several essential categories used to improve the technological process and eliminate weaknesses in the process chain. The base category is the physical effect that takes place when the technical process proceeds. The programming part of the system can apply various methods of creative search to the content stored in the information part of the system. These methods pay particular attention to energy transformations in the technological process. The system application will allow us to systematize the approach to improving technologies and obtaining new technical solutions.

Technological aspects of lift-slab method in high-rise-building construction.

NASA Astrophysics Data System (ADS)

Gaidukov, Pavel V.; Pugach, Evgeny M.

2018-03-01

The utilization efficiency of slab lifting technology for high-rise-building construction is regarded in the present article. The main problem of the article is organizing technology abilities indication, which proves the method application possibility. There is the comparing of lifting technologies and sequential concrete-frame extension, as follows: the first one: the parameters are defined, and the second one: the organizational model is executed. This model defines borders of the usage methods, as well. There is the mathematic model creating, which describes boundary conditions of the present technologies usage. This model allows to predict construction efficiency for different stored-number buildings.

Methods for Addressing Technology-Induced Errors: The Current State

PubMed Central

Dexheimer, J. W.; Hullin Lucay Cossio, C.; Gong, Y.; Jensen, S.; Kaipio, J.; Kennebeck, S.; Kirkendall, E.; Kushniruk, A. W.; Kuziemsky, C.; Marcilly, R.; Röhrig, R.; Saranto, K.; Senathirajah, Y.; Weber, J.; Takeda, H.

2016-01-01

Summary Objectives The objectives of this paper are to review and discuss the methods that are being used internationally to report on, mitigate, and eliminate technology-induced errors. Methods The IMIA Working Group for Health Informatics for Patient Safety worked together to review and synthesize some of the main methods and approaches associated with technology-induced error reporting, reduction, and mitigation. The work involved a review of the evidence-based literature as well as guideline publications specific to health informatics. Results The paper presents a rich overview of current approaches, issues, and methods associated with: (1) safe HIT design, (2) safe HIT implementation, (3) reporting on technology-induced errors, (4) technology-induced error analysis, and (5) health information technology (HIT) risk management. The work is based on research from around the world. Conclusions Internationally, researchers have been developing methods that can be used to identify, report on, mitigate, and eliminate technology-induced errors. Although there remain issues and challenges associated with the methodologies, they have been shown to improve the quality and safety of HIT. Since the first publications documenting technology-induced errors in healthcare in 2005, we have seen in a short 10 years researchers develop ways of identifying and addressing these types of errors. We have also seen organizations begin to use these approaches. Knowledge has been translated into practice in a short ten years whereas the norm for other research areas is of 20 years. PMID:27830228

Teaching Methods Influencing the Sustainability of the Teaching Process in Technology Education in General Education Schools

ERIC Educational Resources Information Center

Soobik, Mart

2014-01-01

The sustainability of technology education is related to a traditional understanding of craft and the methods used to teach it; however, the methods used in the teaching process have been influenced by the innovative changes accompanying the development of technology. In respect to social and economic development, it is important to prepare young…

Technology Alignment and Portfolio Prioritization (TAPP): Advanced Methods in Strategic Analysis, Technology Forecasting and Long Term Planning for Human Exploration and Operations, Advanced Exploration Systems and Advanced Concepts

NASA Technical Reports Server (NTRS)

Funaro, Gregory V.; Alexander, Reginald A.

2015-01-01

The Advanced Concepts Office (ACO) at NASA, Marshall Space Flight Center is expanding its current technology assessment methodologies. ACO is developing a framework called TAPP that uses a variety of methods, such as association mining and rule learning from data mining, structure development using a Technological Innovation System (TIS), and social network modeling to measure structural relationships. The role of ACO is to 1) produce a broad spectrum of ideas and alternatives for a variety of NASA's missions, 2) determine mission architecture feasibility and appropriateness to NASA's strategic plans, and 3) define a project in enough detail to establish an initial baseline capable of meeting mission objectives ACO's role supports the decision­-making process associated with the maturation of concepts for traveling through, living in, and understanding space. ACO performs concept studies and technology assessments to determine the degree of alignment between mission objectives and new technologies. The first step in technology assessment is to identify the current technology maturity in terms of a technology readiness level (TRL). The second step is to determine the difficulty associated with advancing a technology from one state to the next state. NASA has used TRLs since 1970 and ACO formalized them in 1995. The DoD, ESA, Oil & Gas, and DoE have adopted TRLs as a means to assess technology maturity. However, "with the emergence of more complex systems and system of systems, it has been increasingly recognized that TRL assessments have limitations, especially when considering [the] integration of complex systems." When performing the second step in a technology assessment, NASA requires that an Advancement Degree of Difficulty (AD2) method be utilized. NASA has used and developed or used a variety of methods to perform this step: Expert Opinion or Delphi Approach, Value Engineering or Value Stream, Analytical Hierarchy Process (AHP), Technique for the Order of Prioritization by Similarity to Ideal Solution (TOPSIS), and other multi­-criteria decision-making methods. These methods can be labor-intensive, often contain cognitive or parochial bias, and do not consider the competing prioritization between mission architectures. Strategic Decision-Making (SDM) processes cannot be properly understood unless the context of the technology is understood. This makes assessing technological change particularly challenging due to the relationships "between incumbent technology and the incumbent (innovation) system in relation to the emerging technology and the emerging innovation system." The central idea in technology dynamics is to consider all activities that contribute to the development, diffusion, and use of innovations as system functions. Bergek defines system functions within a TIS to address what is actually happening and has a direct influence on the ultimate performance of the system and technology development. ACO uses similar metrics and is expanding these metrics to account for the structure and context of the technology. At NASA technology and strategy is strongly interrelated. NASA's Strategic Space Technology Investment Plan (SSTIP) prioritizes those technologies essential to the pursuit of NASA's missions and national interests. The SSTIP is strongly coupled with NASA's Technology Roadmaps to provide investment guidance during the next four years, within a twenty-year horizon. This paper discusses the methods ACO is currently developing to better perform technology assessments while taking into consideration Strategic Alignment, Technology Forecasting, and Long Term Planning.

Planning and leading of the technological processes by mechanical working with microsoft project

NASA Astrophysics Data System (ADS)

Nae, I.; Grigore, N.

2016-08-01

Nowadays, fabrication systems and methods are being modified; new processing technologies come up, flow sheets develop a minimum number of phases, the flexibility of the technologies grows up, new methods and instruments of monitoring and leading the processing operations also come up. The technological course (route, entry, scheme, guiding) referring to the series of the operation, putting and execution phases of a mark in order to obtain the final product from the blank is represented by a sequence of activities realized by a logic manner, on a well determined schedule, with a determined budget and resources. Also, a project can be defined as a series of specific activities, methodical structured which they aim to finish a specific objective, within a fixed schedule and budget. Within the homogeneity between the project and the technological course, this research is presenting the defining of the technological course of mechanical chip removing process using Microsoft Project. Under these circumstances, this research highlights the advantages of this method: the celerity using of other technological alternatives in order to pick the optimal process, the job scheduling being constrained by any kinds, the standardization of some processing technological operations.

Advances in phage display technology for drug discovery.

PubMed

Omidfar, Kobra; Daneshpour, Maryam

2015-06-01

Over the past decade, several library-based methods have been developed to discover ligands with strong binding affinities for their targets. These methods mimic the natural evolution for screening and identifying ligand-target interactions with specific functional properties. Phage display technology is a well-established method that has been applied to many technological challenges including novel drug discovery. This review describes the recent advances in the use of phage display technology for discovering novel bioactive compounds. Furthermore, it discusses the application of this technology to produce proteins and peptides as well as minimize the use of antibodies, such as antigen-binding fragment, single-chain fragment variable or single-domain antibody fragments like VHHs. Advances in screening, manufacturing and humanization technologies demonstrate that phage display derived products can play a significant role in the diagnosis and treatment of disease. The effects of this technology are inevitable in the development pipeline for bringing therapeutics into the market, and this number is expected to rise significantly in the future as new advances continue to take place in display methods. Furthermore, a widespread application of this methodology is predicted in different medical technological areas, including biosensing, monitoring, molecular imaging, gene therapy, vaccine development and nanotechnology.

Toward a Method for Exposing and Elucidating Ethical Issues with Human Cognitive Enhancement Technologies.

PubMed

Hofmann, Bjørn

2017-04-01

To develop a method for exposing and elucidating ethical issues with human cognitive enhancement (HCE). The intended use of the method is to support and facilitate open and transparent deliberation and decision making with respect to this emerging technology with great potential formative implications for individuals and society. Literature search to identify relevant approaches. Conventional content analysis of the identified papers and methods in order to assess their suitability for assessing HCE according to four selection criteria. Method development. Amendment after pilot testing on smart-glasses. Based on three existing approaches in health technology assessment a method for exposing and elucidating ethical issues in the assessment of HCE technologies was developed. Based on a pilot test for smart-glasses, the method was amended. The method consists of six steps and a guiding list of 43 questions. A method for exposing and elucidating ethical issues in the assessment of HCE was developed. The method provides the ground work for context specific ethical assessment and analysis. Widespread use, amendments, and further developments of the method are encouraged.

Trends in Health Information Technology Safety: From Technology-Induced Errors to Current Approaches for Ensuring Technology Safety

PubMed Central

2013-01-01

Objectives Health information technology (HIT) research findings suggested that new healthcare technologies could reduce some types of medical errors while at the same time introducing classes of medical errors (i.e., technology-induced errors). Technology-induced errors have their origins in HIT, and/or HIT contribute to their occurrence. The objective of this paper is to review current trends in the published literature on HIT safety. Methods A review and synthesis of the medical and life sciences literature focusing on the area of technology-induced error was conducted. Results There were four main trends in the literature on technology-induced error. The following areas were addressed in the literature: definitions of technology-induced errors; models, frameworks and evidence for understanding how technology-induced errors occur; a discussion of monitoring; and methods for preventing and learning about technology-induced errors. Conclusions The literature focusing on technology-induced errors continues to grow. Research has focused on the defining what an error is, models and frameworks used to understand these new types of errors, monitoring of such errors and methods that can be used to prevent these errors. More research will be needed to better understand and mitigate these types of errors. PMID:23882411

Methods for Addressing Technology-induced Errors: The Current State.

PubMed

Borycki, E; Dexheimer, J W; Hullin Lucay Cossio, C; Gong, Y; Jensen, S; Kaipio, J; Kennebeck, S; Kirkendall, E; Kushniruk, A W; Kuziemsky, C; Marcilly, R; Röhrig, R; Saranto, K; Senathirajah, Y; Weber, J; Takeda, H

2016-11-10

The objectives of this paper are to review and discuss the methods that are being used internationally to report on, mitigate, and eliminate technology-induced errors. The IMIA Working Group for Health Informatics for Patient Safety worked together to review and synthesize some of the main methods and approaches associated with technology- induced error reporting, reduction, and mitigation. The work involved a review of the evidence-based literature as well as guideline publications specific to health informatics. The paper presents a rich overview of current approaches, issues, and methods associated with: (1) safe HIT design, (2) safe HIT implementation, (3) reporting on technology-induced errors, (4) technology-induced error analysis, and (5) health information technology (HIT) risk management. The work is based on research from around the world. Internationally, researchers have been developing methods that can be used to identify, report on, mitigate, and eliminate technology-induced errors. Although there remain issues and challenges associated with the methodologies, they have been shown to improve the quality and safety of HIT. Since the first publications documenting technology-induced errors in healthcare in 2005, we have seen in a short 10 years researchers develop ways of identifying and addressing these types of errors. We have also seen organizations begin to use these approaches. Knowledge has been translated into practice in a short ten years whereas the norm for other research areas is of 20 years.

Optimizing substance detection by integration of canine-human team with machine technology

NASA Astrophysics Data System (ADS)

Prestrude, Al M.; Ternes, J. W.

1994-02-01

There are several promising methods and technologies for substance detection. The oldest of these methods is the trained detector or `sniffer' dog. We summarize what is known about the capabilities of dogs in substance detection and recommend comparative testing of the canine- human team with current technology to identify the optimum combination of methods to maximize the detection of explosives and contraband.

A novel method of utilizing permeable reactive kiddle (PRK) for the remediation of acid mine drainage.

PubMed

Lee, Woo-Chun; Lee, Sang-Woo; Yun, Seong-Taek; Lee, Pyeong-Koo; Hwang, Yu Sik; Kim, Soon-Oh

2016-01-15

Numerous technologies have been developed and applied to remediate AMD, but each has specific drawbacks. To overcome the limitations of existing methods and improve their effectiveness, we propose a novel method utilizing permeable reactive kiddle (PRK). This manuscript explores the performance of the PRK method. In line with the concept of green technology, the PRK method recycles industrial waste, such as steel slag and waste cast iron. Our results demonstrate that the PRK method can be applied to remediate AMD under optimal operational conditions. Especially, this method allows for simple installation and cheap expenditure, compared with established technologies. Copyright © 2015 Elsevier B.V. All rights reserved.

[Study on baking processing technology of hui medicine Aconitum flavum].

PubMed

Fu, Xue-yan; Zhang, Bai-tong; Li, Ting-ting; Dong, Lin; Hao, Wen-jing; Yu, Liang

2013-12-01

To screen and optimize the processing technology of Aconitum flavum. The acute-toxicity, anti-inflammatory and analgesic experiments were used as indexes. Four processing methods, including decoction, streaming, baking and processing with Chebulae Fructus decoction, were compared to screen the optimum processing method for Aconitum flavum. The baking time was also optimized. The optimal baked technology was that 1-2 mm decoction pieces was baked at 105 degrees C for 3 hours. The baking method is proved to be the optimal processing method of Aconitum flavum. It is shown that this method is simple and stable.

Neutrophil mediated IFN activation in the bone marrow alters B cell development in human and murine SLE1

PubMed Central

Palanichamy, Arumugam; Bauer, Jason W; Yalavarthi, Srilakshmi; Meednu, Nida; Barnard, Jennifer; Owen, Teresa; Cistrone, Christopher; Bird, Anna; Rabinovich, Alfred; Nevarez, Sarah; Knight, Jason S.; Dedrick, Russell; Rosenberg, Alexander; Wei, Chungwen; Rangel-Moreno, Javier; Liesveld, Jane; Sanz, Inaki; Baechler, Emily; Kaplan, Mariana J.; Anolik, Jennifer H

2014-01-01

Inappropriate activation of type I interferon (IFN) plays a key role in the pathogenesis of autoimmune disease, including systemic lupus erythematosus (SLE). Here we report the presence of IFN activation in SLE bone marrow (BM), as measured by an IFN gene signature, increased IFN regulated chemokines, and direct production of IFN by BM resident cells, associated with profound changes in B cell development. The majority of SLE patients had an IFN signature in the BM that was more pronounced than the paired peripheral blood (PB) and correlated with both higher autoantibodies and disease activity. Pronounced alterations in B cell development were noted in SLE in the presence of an IFN signature with a reduction in the fraction of pro/pre B cells suggesting an inhibition in early B cell development and an expansion of B cells at the transitional (T2) stage. These B cell changes strongly correlated with an increase in BAFF and APRIL expression in the IFN high BM. Furthermore, we found that BM neutrophils in SLE were prime producers of IFN-α and B cell factors. In NZM lupus-prone mice similar changes in B cell development were observed and mediated by IFN, given abrogation in NZM mice lacking type I IFN receptor. BM neutrophils were abundant, responsive to and producers of IFN, in close proximity to B cells. These results indicate that the BM is an important but previously unrecognized target organ in SLE with neutrophil mediated IFN activation and alterations in B cell ontogeny and selection. PMID:24379124

Preinvestigation evaluation of corrective measure technologies for the Badger Army Ammunition Plant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Benioff, P.A.; Tsai, S.Y.

1989-02-01

This report briefly describes and evaluates the suitability of corrective measure technologies for possible use at the solid waste management units (SWMUs) at the Badger Army Ammunition Plant (BAAP), near Baraboo, Wisconsin. Corrective measure technologies considered for contaminated soils include excavation plus on- or off-site disposal in landfills or by incineration, use of solidification or stabilization methods, and in-situ methods such as bioreclamation and chemical or physical methods. Technologies considered for treatment of contaminated groundwater include groundwater pumping followed by discharge or treatment by air stripping and use of subsurface barriers. 5 refs., 1 tab.

Laser triangulation method for measuring the size of parking claw

NASA Astrophysics Data System (ADS)

Liu, Bo; Zhang, Ming; Pang, Ying

2017-10-01

With the development of science and technology and the maturity of measurement technology, the 3D profile measurement technology has been developed rapidly. Three dimensional measurement technology is widely used in mold manufacturing, industrial inspection, automatic processing and manufacturing, etc. There are many kinds of situations in scientific research and industrial production. It is necessary to transform the original mechanical parts into the 3D data model on the computer quickly and accurately. At present, many methods have been developed to measure the contour size, laser triangulation is one of the most widely used methods.

An applied study using systems engineering methods to prioritize green systems options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Sonya M; Macdonald, John M

2009-01-01

For many years, there have been questions about the effectiveness of applying different green solutions. If you're building a home and wish to use green technologies, where do you start? While all technologies sound promising, which will perform the best over time? All this has to be considered within the cost and schedule of the project. The amount of information available on the topic can be overwhelming. We seek to examine if Systems Engineering methods can be used to help people choose and prioritize technologies that fit within their project and budget. Several methods are used to gain perspective intomore » how to select the green technologies, such as the Analytic Hierarchy Process (AHP) and Kepner-Tregoe. In our study, subjects applied these methods to analyze cost, schedule, and trade-offs. Results will document whether the experimental approach is applicable to defining system priorities for green technologies.« less

Driving technology for improving motion quality of active-matrix organic light-emitting diode display

NASA Astrophysics Data System (ADS)

Kim, Jongbin; Kim, Minkoo; Kim, Jong-Man; Kim, Seung-Ryeol; Lee, Seung-Woo

2014-09-01

This paper reports transient response characteristics of active-matrix organic light emitting diode (AMOLED) displays for mobile applications. This work reports that the rising responses look like saw-tooth waveform and are not always faster than those of liquid crystal displays. Thus, a driving technology is proposed to improve the rising transient responses of AMOLED based on the overdrive (OD) technology. We modified the OD technology by combining it with a dithering method because the conventional OD method cannot successfully enhance all the rising responses. Our method can improve all the transitions of AMOLED without modifying the conventional gamma architecture of drivers. A new artifact is found when OD is applied to certain transitions. We propose an optimum OD selection method to mitigate the artifact. The implementation results show the proposed technology can successfully improve motion quality of scrolling texts as well as moving pictures in AMOLED displays.

77 FR 7095 - Transitional Program for Covered Business Method Patents-Definition of Technological Invention

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-10

... 0651-AC75 Transitional Program for Covered Business Method Patents-- Definition of Technological... proceeding for covered business method patents. The provision of the Leahy-Smith America Invents Act will... to the attention of ``Lead Judge Michael Tierney, Covered Business Method Patent Review Proposed...

Technology in Social Work Education: A Systematic Review

ERIC Educational Resources Information Center

Wretman, Christopher J.; Macy, Rebecca J.

2016-01-01

Given the growing prevalence of technology-based instruction, social work faculty need a clear understanding of the strengths and limitations of these methods. We systematically examined the evidence for technology-based instruction in social work education. Using comprehensive and rigorous methods, 38 articles were included in the review. Of…

Modelling Benefits-Oriented Costs for Technology Enhanced Learning

ERIC Educational Resources Information Center

Laurillard, Diana

2007-01-01

The introduction of technology enhanced learning (TEL) methods changes the deployment of the most important resource in the education system: teachers' and learners' time. New technology promises greater personalization and greater productivity, but without careful modeling of the effects on the use of staff time, TEL methods can easily increase…

Electronic Engineering Technology Program Exit Examination as an ABET and Self-Assessment Tool

ERIC Educational Resources Information Center

Thomas, Gary; Darayan, Shahryar

2018-01-01

Every engineering, computing, and engineering technology program accredited by the Accreditation Board for Engineering and Technology (ABET) has formulated many and varied self-assessment methods. Methods used to assess a program for ABET accreditation and continuous improvement are for keeping programs current with academic and industrial…

Computers and terminals as an aid to international technology transfer

NASA Technical Reports Server (NTRS)

Sweeney, W. T.

1974-01-01

As technology transfer becomes more popular and proves to be an economical method for companies of all sizes to take advantage of a tremendous amount of new and available technology from sources all over the world, the introduction of computers and terminals into the international technology transfer process is proving to be a successful method for companies to take part in this beneficial approach to new business opportunities.

Health technology assessment: Off-site sterilization

PubMed Central

Dehnavieh, Reza; Mirshekari, Nadia; Ghasemi, Sara; Goudarzi, Reza; Haghdoost, AliAkbar; Mehrolhassani, Mohammad Hossain; Moshkani, Zahra; Noori Hekmat, Somayeh

2016-01-01

Background: Every year millions of dollars are expended to equip and maintain the hospital sterilization centers, and our country is not an exception of this matter. According to this, it is important to use more effective technologies and methods in health system in order to reach more effectiveness and saving in costs. This study was conducted with the aim of evaluating the technology of regional sterilization centers. Methods: This study was done in four steps. At the first step, safety and effectiveness of technology was studied via systematic study of evidence. The next step was done to evaluate the economical aspect of off-site sterilization technology using gathered data from systematic review of the texts which were related to the technology and costs of off-site and in-site hospital sterilization. Third step was conducted to collect experiences of using technology in some selected hospitals around the world. And in the last step different aspects of acceptance and use of this technology in Iran were evaluated. Results: Review of the selected articles indicated that efficacy and effectiveness of this technology is Confirmed. The results also showed that using this method is not economical in Iran. Conclusion: According to the revealed evidences and also cost analysis, due to shortage of necessary substructures and economical aspect, installing the off-site sterilization health technology in hospitals is not possible currently. But this method can be used to provide sterilization services for clinics and outpatients centers. PMID:27390714

Evaluating interactive technology for an evolving case study on learning and satisfaction of graduate nursing students.

PubMed

Vogt, Marjorie A; Schaffner, Barbara H

2016-07-01

Nursing education is challenged to prepare students for complex healthcare needs through the integration of teamwork and informatics. Technology has become an important teaching tool in the blended classroom to enhance group based learning experiences. Faculty evaluation of classroom technologies is imperative prior to adoption. Few studies have directly compared various technologies and their impact on student satisfaction and learning. The purpose of this study was to evaluate technology enhanced teaching methods on the learning and satisfaction of graduate students in an advanced pharmacology class using an unfolding case study. After IRB approval, students were randomly assigned to one of three groups: blogging group, wiki group or webinar group. Students completed the evolving case study using the assigned interactive technology. Student names were removed from the case studies. Faculty evaluated the case study using a rubric, while blinded to the assigned technology method used. No significant difference was found on case study grades, the range of grades on the assignment demonstrated little differences between the methods used. Students indicated an overall positive impact related to networking and collaboration on a satisfaction survey. Impact of technology methods needs to be explored in other areas of graduate nursing education. Copyright © 2016 Elsevier Ltd. All rights reserved.

Micro-fabrication method of graphite mesa microdevices based on optical lithography technology

NASA Astrophysics Data System (ADS)

Zhang, Cheng; Wen, Donghui; Zhu, Huamin; Zhang, Xiaorui; Yang, Xing; Shi, Yunsheng; Zheng, Tianxiang

2017-12-01

Graphite mesa microdevices have incommensurate contact nanometer interfaces, superlubricity, high-speed self-retraction, and other characteristics, which have potential applications in high-performance oscillators and micro-scale switches, memory devices, and gyroscopes. However, the current method of fabricating graphite mesa microdevices is mainly based on high-cost, low efficiency electron beam lithography technology. In this paper, the processing technologies of graphite mesa microdevices with various shapes and sizes were investigated by a low-cost micro-fabrication method, which was mainly based on optical lithography technology. The characterization results showed that the optical lithography technology could realize a large-area of patterning on the graphite surface, and the graphite mesa microdevices, which have a regular shape, neat arrangement, and high verticality could be fabricated in large batches through optical lithography technology. The experiments and analyses showed that the graphite mesa microdevices fabricated through optical lithography technology basically have the same self-retracting characteristics as those fabricated through electron beam lithography technology, and the maximum size of the graphite mesa microdevices with self-retracting phenomenon can reach 10 µm  ×  10 µm. Therefore, the proposed method of this paper can realize the high-efficiency and low-cost processing of graphite mesa microdevices, which is significant for batch fabrication and application of graphite mesa microdevices.

Innovation processes in technologies for the processing of refractory mineral raw materials

NASA Astrophysics Data System (ADS)

Chanturiya, V. A.

2008-12-01

Analysis of the grade of mineral resources of Russia and other countries shows that end products that are competitive in terms of both technological and environmental criteria in the world market can only be obtained by the development and implementation of progressive technologies based on the up-to-date achievements of fundamental sciences. The essence of modern innovation processes in technologies developed in Russia for the complex and comprehensive processing of refractory raw materials with a complex composition is ascertained. These processes include (i) radiometric methods of concentration of valuable components, (ii) high-energy methods of disintegration of highly dispersed mineral components, and (iii) electrochemical methods of water conditioning to obtain target products for solving specific technological problems.

Overview of Future of Probabilistic Methods and RMSL Technology and the Probabilistic Methods Education Initiative for the US Army at the SAE G-11 Meeting

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL Division and Probabilistic Methods Committee meeting sponsored by the Picatinny Arsenal during March 1-3, 2004 at Westin Morristown, will report progress on projects for probabilistic assessment of Army system and launch an initiative for probabilistic education. The meeting features several Army and industry Senior executives and Ivy League Professor to provide an industry/government/academia forum to review RMSL technology; reliability and probabilistic technology; reliability-based design methods; software reliability; and maintainability standards. With over 100 members including members with national/international standing, the mission of the G-11s Probabilistic Methods Committee is to enable/facilitate rapid deployment of probabilistic technology to enhance the competitiveness of our industries by better, faster, greener, smarter, affordable and reliable product development.

NASA Langley Research and Technology-Transfer Program in Formal Methods

NASA Technical Reports Server (NTRS)

Butler, Ricky W.; Caldwell, James L.; Carreno, Victor A.; Holloway, C. Michael; Miner, Paul S.; DiVito, Ben L.

1995-01-01

This paper presents an overview of NASA Langley research program in formal methods. The major goals of this work are to make formal methods practical for use on life critical systems, and to orchestrate the transfer of this technology to U.S. industry through use of carefully designed demonstration projects. Several direct technology transfer efforts have been initiated that apply formal methods to critical subsystems of real aerospace computer systems. The research team consists of five NASA civil servants and contractors from Odyssey Research Associates, SRI International, and VIGYAN Inc.

Les cooperatives et l'electrification rurale du Quebec, 1945--1964

NASA Astrophysics Data System (ADS)

Dorion, Marie-Josee

Cette these est consacree a l'histoire de l'electrification rurale du Quebec, et, plus particulierement, a l'histoire des cooperatives d'electricite. Fondees par vagues successives a partir de 1945, les cooperatives rurales d'electricite ont ete actives dans plusieurs regions du Quebec et elles ont electrifie une partie significative des zones rurales. Afin de comprendre le contexte de la creation des cooperatives d'electricite, notre these debute (premiere partie) par une analyse du climat sociopolitique des annees precedant la naissance du systeme cooperatif d'electrification rurale. Nous y voyons de quelle facon l'electrification rurale devient progressivement, a partir de la fin des annees 1920, une question d'actualite a laquelle les divers gouvernements qui se succedent tentent de trouver une solution, sans engager---ou si peu---les fonds de l'Etat. En ce sens, la premiere etatisation et la mise sur pied d'Hydro-Quebec, en 1944, marquent une rupture quant au mode d'action privilegie jusque-la. La nouvelle societe d'Etat se voit cependant retirer son mandat d'electrifier le monde rural un an apres sa fondation, car le gouvernement Duplessis, de retour au pouvoir, prefere mettre en place son propre modele d'electrification rurale. Ce systeme repose sur des cooperatives d'electricite, soutenues par un organisme public, l'Office de l'electrification rurale (OER). L'OER suscite de grandes attentes de la part des ruraux et c'est par centaines qu'ils se manifestent. Cet engouement pour les cooperatives complique la tache de l'OER, qui doit superviser de nouvelles societes tout en assurant sa propre organisation. Malgre des hesitations et quelques delais introduits par un manque de connaissances techniques et de personnel qualifie, les commissaires de l'OER se revelent perspicaces et parviennent a mettre sur pied un systeme cooperatif d'electrification rurale qui produit des resultats rapides. Il leur faudra cependant compter sur l'aide des autres acteurs engages dans l'electrification, les organismes publics et les compagnies privees d'electricite. Cette periode de demarrage et d'organisation, traitee dans la deuxieme partie de la these, se termine en 1947-48, au moment ou l'OER et les cooperatives raffermissent leur maitrise du systeme cooperatif d'electrification rurale. Les annees 1948 a 1955 (troisieme partie de these) correspondent a une periode de croissance pour le mouvement cooperatif. Cette partie scrute ainsi le developpement des cooperatives, les vastes chantiers de construction et l'injection de millions de dollars dans l'electrification rurale. Cette troisieme partie prend egalement acte des premiers signes que quelque chose ne va pas si bien dans le monde cooperatif. Nous y verrons egalement les ruraux a l'oeuvre: comme membres, d'abord, mais aussi en tant que benevoles, puis a l'emploi des cooperatives. La quatrieme et derniere partie, les annees 1956 a 1964, aborde les changements majeurs qui ont cours dans l'univers cooperatif; il s'agit d'une ere nouvelle et difficile pour le mouvement cooperatif, dont les reseaux paraissent inadaptes aux changements de profil de la consommation d'electricite des usagers. L'OER sent alors le besoin de raffermir son controle des cooperatives, car il pressent les problemes et les defis auxquels elles auront a faire face. Notre etude se termine par l'acquisition des cooperatives par Hydro-Quebec, en 1963-64. Fondee sur des sources riches et variees, notre demarche propose un eclairage inedit sur une dimension importante de l'histoire de l'electricite au Quebec. Elle permet, ce faisant, de saisir les rouages et l'action de l'Etat sous un angle particulier, avant sa profonde transformation amorcee au cours des annees 1960. De meme, elle apporte quelques cles nouvelles pour une meilleure comprehension de la dynamique des milieux ruraux de cette periode.

The Use of Technology to Enhance the Learning Experience of ESL Students

ERIC Educational Resources Information Center

Diallo, Abdoulaye

2014-01-01

The growing numbers of ELLs (English language learners) makes the search for new effective and efficient instructional methods a priority. While several teaching methods and tools are used to help ELLs succeed in becoming proficient English speakers, technology has gained substantial attention due to the abundance of new technology tools, which…

Projecting technological change

Treesearch

Kenneth E. Skog

2007-01-01

Improving efficiency in the use of both wood and nonwood inputs has characterized the US forest sector over the last 50 years. This chapter explores methods used to reflect this pattern of technological change and others in the Timber Assessment Projection System models. The development and use of three types of technology projection methods are explained: (1)...

Technology-Enhanced Multimedia Instruction in Foreign Language Classrooms: A Mixed Methods Study

ERIC Educational Resources Information Center

Ketsman, Olha

2012-01-01

Technology-enhanced multimedia instruction in grades 6 through 12 foreign language classrooms was the focus of this study. The study's findings fill a gap in the literature through the report of how technology-enhanced multimedia instruction was successfully implemented in foreign language classrooms. Convergent parallel mixed methods study…

Application of mathematical methods of analysis in selection of competing information technologies

NASA Astrophysics Data System (ADS)

Semenov, V. L.; Kadyshev, E. N.; Zakharova, A. N.; Patianova, A. O.; Dulina, G. S.

2018-05-01

The article discusses the use of qualimetry methods using the apparatus of mathematical analysis in the formation of the integral index that allows one to select the best option among competing information technology. The authors propose the use of affine space in the evaluation and selection of competing information technologies.

Instructors' Growth in TPACK: Teaching Technology-Infused Methods Courses to Preservice Teachers

ERIC Educational Resources Information Center

Foulger, Teresa S.; Buss, Ray R.; Wetzel, Keith; Lindsey, LeeAnn

2015-01-01

We were concerned about teaching a stand-alone technology integration course while advocating that teachers employ full integration. Our college moved to a tech-infusion model whereby our educational technology curriculum would be incorporated in methods courses. Using a qualitative approach, we documented experiences of teacher educators who were…

A Numerical Methods Course Based on B-Learning: Integrated Learning Design and Follow Up

ERIC Educational Resources Information Center

Cepeda, Francisco Javier Delgado

2013-01-01

Information and communication technologies advance continuously, providing a real support for learning processes. Learning technologies address areas which previously have corresponded to face-to-face learning, while mobile resources are having a growing impact on education. Numerical Methods is a discipline and profession based on technology. In…

Using different methods to communicate: how adults with severe acquired communication difficulties make decisions about the communication methods they use and how they experience them.

PubMed

Paterson, Helen; Carpenter, Christine

2015-01-01

This study aimed to explore how adults with severe acquired communication difficulties experience and make decisions about the communication methods they use. The primary objectives were to explore their perceptions of different communication methods, how they choose communication methods to use in different situations and with different communication partners, and what facilitates their decision-making. A qualitative phenomenological approach was used. Data collection methods were face-to-face video-recorded interviews using each participant's choice of communication method and e-mail interviews. The methodological challenges of involving participants with severe acquired communication disorders in research were addressed in the study design. Seven participants, all men, were recruited from a long-term care setting in a rehabilitation hospital. The data analysis process was guided by Colaizzi's (1978) analytic framework. Four main themes were identified: communicating in the digital age – e-mail and social media, encountering frustrations in using communication technologies, role and identity changes and the influences of communication technology and seeking a functional interaction using communication technologies. Adults with acquired communication difficulties find digital communication, such as e-mail and social media, and mainstream technologies, such as iPads, beneficial in communicating with others. Current communication technologies present a number of challenges for adults with disabilities and are limited in their communicative functions to support desired interactions. The implications for AAC technology development and speech and language therapy service delivery are addressed.

Amorphous or Crystalline? A Comparison of Particle Engineering Methods and Selection.

PubMed

Thakkar, Sachin G; Fathe, Kristin; Smyth, Hugh D C

2015-01-01

This review is intended to provide a critical account of the current goals and technologies of particle engineering regarding the production of crystalline and amorphous particles. The technologies discussed here cover traditional crystallization technologies, supercritical fluid technologies, spray drying, controlled solvent crystallization, and sonocrystallization. Also recent advancements in particle engineering including spray freezing into liquid, thin-film freeze-drying, PRINT technology are presented. The paper also examines the merits and limitations of these technologies with respect to their methods of characterization. Additionally a section discussing the utility of creating amorphous and crystalline formulation approaches in regards to bioavailability and utility in formulation is presented.

Progress in Energy Storage Technologies: Models and Methods for Policy Analysis

NASA Astrophysics Data System (ADS)

Matteson, Schuyler W.

Climate change and other sustainability challenges have led to the development of new technologies that increase energy efficiency and reduce the utilization of finite resources. To promote the adoption of technologies with social benefits, governments often enact policies that provide financial incentives at the point of purchase. In their current form, these subsidies have the potential to increase the diffusion of emerging technologies; however, accounting for technological progress can improve program success while decreasing net public investment. This research develops novel methods using experience curves for the development of more efficient subsidy policies. By providing case studies in the field of automotive energy storage technologies, this dissertation also applies the methods to show the impacts of incorporating technological progress into energy policies. Specific findings include learning-dependent tapering subsidies for electric vehicles based on the lithium-ion battery experience curve, the effects of residual learning rates in lead-acid batteries on emerging technology cost competitiveness, and a cascading diffusion assessment of plug-in hybrid electric vehicle subsidy programs. Notably, the results show that considering learning rates in policy development can save billions of dollars in public funds, while also lending insight into the decision of whether or not to subsidize a given technology.

JPRS Report, Science & Technology, Japan: Symposium on Applications of Advanced Technology: Sensors

DTIC Science & Technology

1992-03-02

attempted as a part of a movement proposed by the [Text] author and his coworkers in 1983. In principle, it is a method that forcibly electrolyzes the...value of the current flowing at that time. The detection and Technology method is similar to that of the conventional phosphorus pentoxide sensor, and...electrolytes 3 ’:.i/ from the standpoint of developing energy-related tech- • ........ !ii. 4 nology. This method of water electrolysis is

Use of cultural probes for representation of chronic disease experience: exploration of an innovative method for design of supportive technologies.

PubMed

Hassling, Linda; Nordfeldt, Sam; Eriksson, Henrik; Timpka, Toomas

2005-01-01

Chronic diseases do not only manifest themselves as sets of pathophysiological factors. They bring about an equally important psychosocial impact. Unfortunately, it is difficult to account for this impact in the development of supportive technologies. This study describes and explores a method for elicitation of requirements on technologies supporting self-management including emotional aspects. The method takes advantage of a self-documentary media kit for collection of data from the everyday context of chronic disease. The resulting contextual data can contribute new insights to multi-disciplinary teams in the design of supporting technologies.

Eye Tracking and Head Movement Detection: A State-of-Art Survey

PubMed Central

2013-01-01

Eye-gaze detection and tracking have been an active research field in the past years as it adds convenience to a variety of applications. It is considered a significant untraditional method of human computer interaction. Head movement detection has also received researchers' attention and interest as it has been found to be a simple and effective interaction method. Both technologies are considered the easiest alternative interface methods. They serve a wide range of severely disabled people who are left with minimal motor abilities. For both eye tracking and head movement detection, several different approaches have been proposed and used to implement different algorithms for these technologies. Despite the amount of research done on both technologies, researchers are still trying to find robust methods to use effectively in various applications. This paper presents a state-of-art survey for eye tracking and head movement detection methods proposed in the literature. Examples of different fields of applications for both technologies, such as human-computer interaction, driving assistance systems, and assistive technologies are also investigated. PMID:27170851

Knowledge management impact of information technology Web 2.0/3.0. The case study of agent software technology usability in knowledge management system

NASA Astrophysics Data System (ADS)

Sołtysik-Piorunkiewicz, Anna

2015-02-01

How we can measure the impact of internet technology Web 2.0/3.0 for knowledge management? How we can use the Web 2.0/3.0 technologies for generating, evaluating, sharing, organizing knowledge in knowledge-based organization? How we can evaluate it from user-centered perspective? Article aims to provide a method for evaluate the usability of web technologies to support knowledge management in knowledge-based organizations of the various stages of the cycle knowledge management, taking into account: generating knowledge, evaluating knowledge, sharing knowledge, etc. for the modern Internet technologies based on the example of agent technologies. The method focuses on five areas of evaluation: GUI, functional structure, the way of content publication, organizational aspect, technological aspect. The method is based on the proposed indicators relating respectively to assess specific areas of evaluation, taking into account the individual characteristics of the scoring. Each of the features identified in the evaluation is judged first point wise, then this score is subject to verification and clarification by means of appropriate indicators of a given feature. The article proposes appropriate indicators to measure the impact of Web 2.0/3.0 technologies for knowledge management and verification them in an example of agent technology usability in knowledge management system.

Pervasive healthcare as a scientific discipline.

PubMed

Bardram, J E

2008-01-01

The OECD countries are facing a set of core challenges; an increasing elderly population; increasing number of chronic and lifestyle-related diseases; expanding scope of what medicine can do; and increasing lack of medical professionals. Pervasive healthcare asks how pervasive computing technology can be designed to meet these challenges. The objective of this paper is to discuss 'pervasive healthcare' as a research field and tries to establish how novel and distinct it is, compared to related work within biomedical engineering, medical informatics, and ubiquitous computing. The paper presents the research questions, approach, technologies, and methods of pervasive healthcare and discusses these in comparison to those of other related scientific disciplines. A set of central research themes are presented; monitoring and body sensor networks; pervasive assistive technologies; pervasive computing for hospitals; and preventive and persuasive technologies. Two projects illustrate the kind of research being done in pervasive healthcare. The first project is targeted at home-based monitoring of hypertension; the second project is designing context-aware technologies for hospitals. Both projects approach the healthcare challenges in a new way, apply a new type of research method, and come up with new kinds of technological solutions. 'Clinical proof-of-concept' is recommended as a new method for pervasive healthcare research; the method helps design and test pervasive healthcare technologies, and in ascertaining their clinical potential before large-scale clinical tests are needed. The paper concludes that pervasive healthcare as a research field and agenda is novel; it is addressing new emerging research questions, represents a novel approach, designs new types of technologies, and applies a new kind of research method.

Proof of principle in vitro study of a prototype ultrasound technology to size stone fragments during ureteroscopy.

PubMed

Sorensen, Mathew D; Teichman, Joel M H; Bailey, Michael R

2009-07-01

Proof-of-principle in vitro experiments evaluated a prototype ultrasound technology to size kidney stone fragments. Nineteen human stones were measured using manual calipers. A 10-MHz, 1/8'' (10F) ultrasound transducer probe pinged each stone on a kidney tissue phantom submerged in water using two methods. In Method 1, the instrument was aligned such that the ultrasound pulse traveled through the stone. In Method 2, the instrument was aligned partially over the stone such that the ultrasound pulse traveled through water. For Method 1, the correlation between caliper- and ultrasound-determined stone size was r(2) = 0.71 (P < 0.0001). All but two stone measurements were accurate and precise to within 1 mm. For Method 2, the correlation was r(2) = 0.99 (P < 0.0001), and measurements were accurate and precise to within 0.25 mm. The prototype technology and either method measured stone size with good accuracy and precision. This technology may be possible to incorporate into ureteroscopy.

A Delphi forecast of technology in education

NASA Technical Reports Server (NTRS)

Robinson, B. E.

1973-01-01

The results are reported of a Delphi forecast of the utilization and social impacts of large-scale educational telecommunications technology. The focus is on both forecasting methodology and educational technology. The various methods of forecasting used by futurists are analyzed from the perspective of the most appropriate method for a prognosticator of educational technology, and review and critical analysis are presented of previous forecasts and studies. Graphic responses, summarized comments, and a scenario of education in 1990 are presented.

Discerning trends in multiplex immunoassay technology with potential for resource-limited settings.

PubMed

Gordon, Julian; Michel, Gerd

2012-04-01

In the search for more powerful tools for diagnoses of endemic diseases in resource-limited settings, we have been analyzing technologies with potential applicability. Increasingly, the process focuses on readily accessible bodily fluids combined with increasingly powerful multiplex capabilities to unambiguously diagnose a condition without resorting to reliance on a sophisticated reference laboratory. Although these technological advances may well have important implications for the sensitive and specific detection of disease, to date their clinical utility has not been demonstrated, especially in resource-limited settings. Furthermore, many emerging technological developments are in fields of physics or engineering, which are not readily available to or intelligible to clinicians or clinical laboratory scientists. This review provides a look at technology trends that could have applicability to high-sensitivity multiplexed immunoassays in resource-limited settings. Various technologies are explained and assessed according to potential for reaching relevant limits of cost, sensitivity, and multiplex capability. Frequently, such work is reported in technical journals not normally read by clinical scientists, and the authors make enthusiastic claims for the potential of their technology while ignoring potential pitfalls. Thus it is important to draw attention to technical hurdles that authors may not be publicizing. Immunochromatographic assays, optical methods including those involving waveguides, electrochemical methods, magnetorestrictive methods, and field-effect transistor methods based on nanotubes, nanowires, and nanoribbons reveal possibilities as next-generation technologies.

The Goals and Methods of Educational Technology Research over a Quarter Century (1989-2014)

ERIC Educational Resources Information Center

Reeves, Thomas C.; Oh, Eunjung Grace

2017-01-01

This paper presents an analysis of educational technology research with specific emphasis on determining how the research goals pursued and methods used have evolved over the 25-year period from 1989 through 2014. For this study, the contents of the "Educational Technology Research and Development" journal were analyzed over two six-year…

Navigating Access and Maintaining Established Practice: Social Studies Teachers' Technology Integration at Three Florida Middle Schools

ERIC Educational Resources Information Center

Sheffield, Caroline

2011-01-01

This mixed methods multiple case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools This mixed methods, multiple-case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools in a large Florida school…

Integration of Technology in Elementary Pre-Service Teacher Education: An Examination of Mathematics Methods Courses

ERIC Educational Resources Information Center

Mitchell, Rebecca; Laski, Elida

2013-01-01

Instructors (N = 204) of elementary mathematics methods courses completed a survey assessing the extent to which they stay informed about research related to effective uses of educational technology and the kinds and numbers of educational technologies they include in their courses. Findings indicate that, while they view educational technology…

Experience in Use of Project Method during Technology Lessons in Secondary Schools of the USA

ERIC Educational Resources Information Center

Sheludko, Inna

2015-01-01

The article examines the opportunities and prospects for the use of experience of project method during "technology lessons" in US secondary schools, since the value of project technology implementation experience into the educational process in the USA for ensuring holistic development of children, preparing them for adult life, in…

Developing Argumentation Ability as a Way to Promote Technological Literacy

ERIC Educational Resources Information Center

Choresh, Cilla; Mevarech, Zemira R.; Frank, Moti

2009-01-01

The main purpose of this study is to investigate the effects of three instructional methods on students' technological literacy (TL) and argumentation ability. Participants were 285 seventh grade Israeli boys and girls (12-13-year-old) who studied in 18 technology classes in four junior high schools. The three teaching methods were: (a) teaching…

Overcoming Language and Literacy Barriers: Using Student Response System Technology to Collect Quality Program Evaluation Data from Immigrant Participants

ERIC Educational Resources Information Center

Walker, Susan K.; Mao, Dung

2016-01-01

Student response system technology was employed for parenting education program evaluation data collection with Karen adults. The technology, with translation and use of an interpreter, provided an efficient and secure method that respected oral language and collective learning preferences and accommodated literacy needs. The method was popular…

Manufacturing Methods and Technology Program Plan, CY 1984.

DTIC Science & Technology

1984-09-01

77nD-Al48 828 MANUFACTURING METHODS AIND TECHNOLOGY PROGRAM PLAN CY 1/3 1984(U) ARMY INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND IL G FISCHER...1984 MANUFACTURING TECHNOLOGY DIVISION U S ARMY INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND, ILLINOIS 61299-7260 8 4 30 033 .. . . . . ...4i.l...NUMBE2N. GOVT ACCESSION NO. 3. RECIPIENT’S CATALOG NUMBER i2- ffl7’ NONE 14TTITLE (Mid Skdde) S. TYPE OF REPORT & PERIOD COVERED MANUFACTURING METHODS

Study on establishment of Body of Knowledge of Taiwan's Traditional Wooden Structure Technology

NASA Astrophysics Data System (ADS)

Huang, M. T.; Chiou, S. C.; Hsu, T. W.; Su, P. C.

2015-08-01

The timber technology of the Taiwan traditional architecture is brought by the immigrants in the Southern Fujian of China in the early, which has been inherited for a hundred years. In the past, these traditional timber technologies were taught by mentoring, however, due to the change of the social form, the construction of the traditional architecture was faded away, and what is gradually replaced is the repair work of the traditional architecture, therefore, the construction method of the timber technology, use form of the tool and other factors are very different from previous one, and the core technology is faced with the dilemma of endangered loss. There are many relevant studies on architectural style, construction method of technology, schools of craftsman, technical capacity of craftsman and other timber technologies, or the technology preservation is carried out by dictating the historical record, studying the skills and other ways, but for the timber craftsman repairing the traditional architecture on the front line, there is still space for discussing whether to maintain the original construction method and maintain the due repair quality for the core technology. This paper classified the timber technology knowledge with the document analysis method and expert interview method, carried out the architecture analysis of knowledge hierarchy, and finally, built the preliminary framework of the timber technology knowledge system of the Taiwan traditional architecture, and built the standard formulation available for craftsman training and skills identification by virtue of the knowledge system, so that the craftsman did not affect the technical capacity due to the change of the knowledge instruction system, thus, affecting the repair quality of the traditional architecture; and in addition, the building of the database system can also be derived by means of the knowledge structure, so as to integrate the consistency of the contents of core technical capacity. It can be used as the interpretation data; the knowledge is standardized and the authority file is established, which is regarded as a technical specification, so that the technology is standardized, thus, avoid loss or distort.

Future Research in Health Information Technology: A Review

PubMed Central

Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammad Reza; Saghafi, Fatemeh

2017-01-01

Introduction Currently, information technology is considered an important tool to improve healthcare services. To adopt the right technologies, policy makers should have adequate information about present and future advances. This study aimed to review and compare studies with a focus on the future of health information technology. Method This review study was completed in 2015. The databases used were Scopus, Web of Science, ProQuest, Ovid Medline, and PubMed. Keyword searches were used to identify papers and materials published between 2000 and 2015. Initially, 407 papers were obtained, and they were reduced to 11 papers at the final stage. The selected papers were described and compared in terms of the country of origin, objective, methodology, and time horizon. Results The papers were divided into two groups: those forecasting the future of health information technology (seven papers) and those providing health information technology foresight (four papers). The results showed that papers related to forecasting the future of health information technology were mostly a literature review, and the time horizon was up to 10 years in most of these studies. In the health information technology foresight group, most of the studies used a combination of techniques, such as scenario building and Delphi methods, and had long-term objectives. Conclusion To make the most of an investment and to improve planning and successful implementation of health information technology, a strategic plan for the future needs to be set. To achieve this aim, methods such as forecasting the future of health information technology and offering health information technology foresight can be applied. The forecasting method is used when the objectives are not very large, and the foresight approach is recommended when large-scale objectives are set to be achieved. In the field of health information technology, the results of foresight studies can help to establish realistic long-term expectations of the future of health information technology. PMID:28566991

Assessment of technological level of stem cell research using principal component analysis.

PubMed

Do Cho, Sung; Hwan Hyun, Byung; Kim, Jae Kyeom

2016-01-01

In general, technological levels have been assessed based on specialist's opinion through the methods such as Delphi. But in such cases, results could be significantly biased per study design and individual expert. In this study, therefore scientific literatures and patents were selected by means of analytic indexes for statistic approach and technical assessment of stem cell fields. The analytic indexes, numbers and impact indexes of scientific literatures and patents, were weighted based on principal component analysis, and then, were summated into the single value. Technological obsolescence was calculated through the cited half-life of patents issued by the United States Patents and Trademark Office and was reflected in technological level assessment. As results, ranks of each nation's in reference to the technology level were rated by the proposed method. Furthermore we were able to evaluate strengthens and weaknesses thereof. Although our empirical research presents faithful results, in the further study, there is a need to compare the existing methods and the suggested method.

IT: An Effective Pedagogic Tool in the Teaching of Quantitative Methods in Management.

ERIC Educational Resources Information Center

Nadkami, Sanjay M.

1998-01-01

Examines the possibility of supplementing conventional pedagogic methods with information technology-based teaching aids in the instruction of quantitative methods to undergraduate students. Considers the case for a problem-based learning approach, and discusses the role of information technology. (Author/LRW)

A Mixed-Methods Exploration of an Environment for Learning Computer Programming

ERIC Educational Resources Information Center

Mather, Richard

2015-01-01

A mixed-methods approach is evaluated for exploring collaborative behaviour, acceptance and progress surrounding an interactive technology for learning computer programming. A review of literature reveals a compelling case for using mixed-methods approaches when evaluating technology-enhanced-learning environments. Here, ethnographic approaches…

Technology-delivered adaptations of motivational interviewing for health-related behaviors: A systematic review of the current research

PubMed Central

Shingleton, Rebecca M.; Palfai, Tibor P.

2015-01-01

Objectives The aims of this paper were to describe and evaluate the methods and efficacy of technology-delivered motivational interviewing interventions (TAMIs), discuss the challenges and opportunities of TAMIs, and provide a framework for future research. Methods We reviewed studies that reported using motivational interviewing (MI) based components delivered via technology and conducted ratings on technology description, comprehensiveness of MI, and study methods. Results The majority of studies were fully-automated and included at least one form of media rich technology to deliver the TAMI. Few studies provided complete descriptions of how MI components were delivered via technology. Of the studies that isolated the TAMI effects, positive changes were reported. Conclusion Researchers have used a range of technologies to deliver TAMIs suggesting feasibility of these methods. However, there are limited data regarding their efficacy, and strategies to deliver relational components remain a challenge. Future research should better characterize the components of TAMIs, empirically test the efficacy of TAMIs with randomized controlled trials, and incorporate fidelity measures. Practice Implications TAMIs are feasible to implement and well accepted. These approaches offer considerable potential to reduce costs, minimize therapist and training burden, and expand the range of clients that may benefit from adaptations of MI. PMID:26298219

Philosophy of Technology Assumptions in Educational Technology Leadership

ERIC Educational Resources Information Center

Webster, Mark David

2017-01-01

A qualitative study using grounded theory methods was conducted to (a) examine what philosophy of technology assumptions are present in the thinking of K-12 technology leaders, (b) investigate how the assumptions may influence technology decision making, and (c) explore whether technological determinist assumptions are present. Subjects involved…

Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation questionnaire, and a scoring formula.

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

Methods for studying medical device technology and practitioner cognition: the case of user-interface issues with infusion pumps.

PubMed

Schraagen, Jan Maarten; Verhoeven, Fenne

2013-02-01

The aims of this study were to investigate how a variety of research methods is commonly employed to study technology and practitioner cognition. User-interface issues with infusion pumps were selected as a case because of its relevance to patient safety. Starting from a Cognitive Systems Engineering perspective, we developed an Impact Flow Diagram showing the relationship of computer technology, cognition, practitioner behavior, and system failure in the area of medical infusion devices. We subsequently conducted a systematic literature review on user-interface issues with infusion pumps, categorized the studies in terms of methods employed, and noted the usability problems found with particular methods. Next, we assigned usability problems and related methods to the levels in the Impact Flow Diagram. Most study methods used to find user interface issues with infusion pumps focused on observable behavior rather than on how artifacts shape cognition and collaboration. A concerted and theory-driven application of these methods when testing infusion pumps is lacking in the literature. Detailed analysis of one case study provided an illustration of how to apply the Impact Flow Diagram, as well as how the scope of analysis may be broadened to include organizational and regulatory factors. Research methods to uncover use problems with technology may be used in many ways, with many different foci. We advocate the adoption of an Impact Flow Diagram perspective rather than merely focusing on usability issues in isolation. Truly advancing patient safety requires the systematic adoption of a systems perspective viewing people and technology as an ensemble, also in the design of medical device technology. Copyright © 2012 Elsevier Inc. All rights reserved.

Developments in hydrogenation technology for fine-chemical and pharmaceutical applications.

PubMed

Machado, R M; Heier, K R; Broekhuis, R R

2001-11-01

The continuous innovation in hydrogenation technology is testimony to its growing importance in the manufacture of specialty and fine chemicals. New developments in equipment, process intensification and catalysis represent major themes that have undergone recent advances. Developments in chiral catalysis, methods to support and fix homogeneous catalysts, novel reactor and mixing technology, high-throughput screening, supercritical processing, spectroscopic and electrochemical online process monitoring, monolithic and structured catalysts, and sonochemical activation methods illustrate the scope and breadth of evolving technology applied to hydrogenation.

Application of Human Factors Methods to Design Healthcare Work Systems: Instance of the prevention of Adverse Drug Events.

PubMed

Marcilly, Romaric; Beuscart-Zephir, Marie-Catherine

2015-01-01

Human Factors (HF) methods are increasingly needed to support the design of new technologies in order to avoid that introducing those technologies into healthcare work systems induces use errors with potentially catastrophic consequences for the patients. This chapter illustrates the application of HF methods in developing two health technologies aiming at securing the hospital medication management process. Lessons learned from this project highlight the importance of (i) analyzing the work system in which the technology is intended to be implemented, (ii) involving end users in the design process and (iii) the intermediation role of HF between end users and scientific/technical experts.

Applying scrum methods to ITS projects.

DOT National Transportation Integrated Search

2017-08-01

The introduction of new technology generally brings new challenges and new methods to help with deployments. Agile methodologies have been introduced in the information technology industry to potentially speed up development. The Federal Highway Admi...

Assessing pre-service science teachers' technological pedagogical content knowledge (TPACK) through observations and lesson plans

NASA Astrophysics Data System (ADS)

Canbazoglu Bilici, Sedef; Selcen Guzey, S.; Yamak, Havva

2016-05-01

Background: Technological pedagogical content knowledge (TPACK) is critical for effective teaching with technology. However, generally science teacher education programs do not help pre-service teachers develop TPACK. Purpose: The purpose of this study was to assess pre-service science teachers' TPACK over a semester-long Science Methods. Sample: Twenty-seven pre-service science teachers took the course toward the end of their four-year teacher education program. Design and method: The study employed the case study methodology. Lesson plans and microteaching observations were used as data collection tools. Technological Pedagogical Content Knowledge-based lesson plan assessment instrument (TPACK-LpAI) and Technological Pedagogical Content Knowledge Observation Protocol (TPACK-OP) were used to analyze data obtained from observations and lesson plans. Results: The results showed that the TPACK-focused Science Methods course had an impact on pre-service teachers' TPACK to varying degrees. Most importantly, the course helped teachers gain knowledge of effective usage of educational technology tools. Conclusion: Teacher education programs should provide opportunities to pre-service teachers to develop their TPACK so that they can effectively integrate technology into their teaching.

[Advances of studies on new technology and method for identifying traditional Chinese medicinal materials].

PubMed

Chen, Shilin; Guo, Baolin; Zhang, Guijun; Yan, Zhuyun; Luo, Guangming; Sun, Suqin; Wu, Hezhen; Huang, Linfang; Pang, Xiaohui; Chen, Jianbo

2012-04-01

In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.

COMPREHENSIVE ASSESSMENT OF COMPLEX TECHNOLOGIES: INTEGRATING VARIOUS ASPECTS IN HEALTH TECHNOLOGY ASSESSMENT.

PubMed

Lysdahl, Kristin Bakke; Mozygemba, Kati; Burns, Jacob; Brönneke, Jan Benedikt; Chilcott, James B; Ward, Sue; Hofmann, Bjørn

2017-01-01

Despite recent development of health technology assessment (HTA) methods, there are still methodological gaps for the assessment of complex health technologies. The INTEGRATE-HTA guidance for effectiveness, economic, ethical, socio-cultural, and legal aspects, deals with challenges when assessing complex technologies, such as heterogeneous study designs, multiple stakeholder perspectives, and unpredictable outcomes. The objective of this article is to outline this guidance and describe the added value of integrating these assessment aspects. Different methods were used to develop the various parts of the guidance, but all draw on existing, published knowledge and were supported by stakeholder involvement. The guidance was modified after application in a case study and in response to feedback from internal and external reviewers. The guidance consists of five parts, addressing five core aspects of HTA, all presenting stepwise approaches based on the assessment of complexity, context, and stakeholder involvement. The guidance on effectiveness, health economics and ethics aspects focus on helping users choose appropriate, or further develop, existing methods. The recommendations are based on existing methods' applicability for dealing with problems arising with complex interventions. The guidance offers new frameworks to identify socio-cultural and legal issues, along with overviews of relevant methods and sources. The INTEGRATE-HTA guidance outlines a wide range of methods and facilitates appropriate choices among them. The guidance enables understanding of how complexity matters for HTA and brings together assessments from disciplines, such as epidemiology, economics, ethics, law, and social theory. This indicates relevance for a broad range of technologies.

Influence of the Simulation Method on 7th Grade Students' Achievements in Science and Technology Lessons

ERIC Educational Resources Information Center

Teke, Huseyin; Dogan, Bekir; Duran, Ahmet

2015-01-01

This study aimed to make a comparative analysis of seventh-grade (the second level of the primary education) students' achievement in "Systems of The Human Body" unit in Science and Technology lesson which was taught using both the simulation method and the traditional method along with the influence of these methods on students'…

Tapping into Graduate Students' Collaborative Technology Experience in a Research Methods Class: Insights on Teaching Research Methods in a Malaysian and American Setting

ERIC Educational Resources Information Center

Vasquez-Colina, Maria D.; Maslin-Ostrowski, Pat; Baba, Suria

2017-01-01

This case study used qualitative and quantitative methods to investigate challenges of learning and teaching research methods by examining graduate students' use of collaborative technology (i.e., digital tools that enable collaboration and information seeking such as software and social media) and students' computer self-efficacy. We conducted…

The Impact of Globalization and Technology on Teaching Business Communication: Reframing and Enlarging World View, Methods, and Content

ERIC Educational Resources Information Center

Berry, Priscilla

2013-01-01

This paper explores the current paradigm shift in the use of technology in the classroom, which is occurring because of technology explosion in society, impact of globalization, necessary reframing, and enlarging of the world view, methods, and content to make business communication classes relevant. The question is whether the classroom should…

Assessing the Available ICT Infrastructure for Collaborative Web Technologies in a Blended Learning Environment in Tanzania: A Mixed Methods Research

ERIC Educational Resources Information Center

Pima, John Marco; Odetayo, Michael; Iqbal, Rahat; Sedoyeka, Eliamani

2016-01-01

This paper is about the use of a Mixed Methods approach in an investigation that sought to assess the available Information and Communication Technologies (ICT) infrastructure capable of supporting Collaborative Web Technologies (CWTs) in a Blended Learning (BL) environment in Tanzanian Higher Education Institutions (HEIs). We first used…

Novel optical interconnect devices applying mask-transfer self-written method

NASA Astrophysics Data System (ADS)

Ishizawa, Nobuhiko; Matsuzawa, Yusuke; Tokiwa, Yu; Nakama, Kenichi; Mikami, Osamu

2012-01-01

The introduction of optical interconnect technology is expected to solve problems of conventional electric wiring. One of the promising technologies realizing optical interconnect is the self-written waveguide (SWW) technology with lightcurable resin. We have developed a new technology of the "Mask-Transfer Self-Written (MTSW)" method. This new method enables fabrication of arrayed M x N optical channels at one shot of UV-light. Using this technology, several new optical interconnect devices and connection technologies have been proposed and investigated. In this paper, first, we introduce MTSW method briefly. Next, we show plug-in alignment approach using optical waveguide plugs (OWP) and a micro-hole array (MHA) which are made of the light-curable resin. Easy and high efficiency plug-in alignment between fibers and an optoelectronic-printed wiring board (OE-PWB), between a fiber and a VCSEL, so on will be feasible. Then, we propose a new three-dimensional (3D) branch waveguide. By controlling the irradiating angle through the photomask aperture, it will be possible to fabricate 2-branch and 4-branch waveguides with a certain branch angle. The 3D branch waveguide will be very promising in the future optical interconnects and coupler devices of the multicore optical fiber.

Technology and Counseling

ERIC Educational Resources Information Center

Loughary, John W.

1977-01-01

Today's world is vastly technological, and counselors need to keep abreast of advances in computer science, biofeedback, and other technical systems. Counseling and technology from a larger perspective define technology as concepts and methods as well as hardware. (Author)

Combining an Analytic Hierarchy Process and TOPSIS for Selecting Postharvest Technology Method for Selayar Citrus in Indonesia

NASA Astrophysics Data System (ADS)

Dirpan, Andi

2018-05-01

This research was intended to select the best handling methods or postharvest technologies that can be used to maintain the quality of citrus fruit in Selayar, South Sulawesi, Indonesia among (1) modified atmosphere packaging (MAP (2) Controlled atmosphere storage (CAS) (3) coatings (4) hot water treatment (5) Hot Calcium Dip (HCD) by using combination between an analytic hierarchy process (AHP) and TOPSIS. Improving quality, applicability, increasing shelf life and reducing cost are used as the criteria to determine the best postharvest technologies. The results show that the most important criteria for selecting postharvest technology is improving quality followed by increasing shelf life, reducing cost and applicability. Furthermore, by using TOPSIS, it is clear that the postharvest technology that had the lowest rangking is modified atmosphere packaging (MAP), followed by controlled atmosphere storage (CAS), coatings, hot calcium dip (HCD) and hot water treatment (HWT). Therefore, it can be concluded that the best postharvest technology method for Selayar citrus is modified atmosphere packaging (MAP).

Implementation of newly adopted technology in acute care settings: a qualitative analysis of clinical staff

PubMed Central

Langhan, Melissa L.; Riera, Antonio; Kurtz, Jordan C.; Schaeffer, Paula; Asnes, Andrea G.

2015-01-01

Objective Technologies are not always successfully implemented into practise. We elicited experiences of acute care providers with the introduction of technology and identified barriers and facilitators in the implementation process. Methods A qualitative study using one-on-one interviews among a purposeful sample of 19 physicians and nurses within ten emergency departments and intensive care units was performed. Grounded theory, iterative data analysis and the constant comparative method were used to inductively generate ideas and build theories. Results Five major categories emerged: decision-making factors, the impact on practise, technology's perceived value, facilitators and barriers to implementation. Barriers included negative experiences, age, infrequent use, and access difficulties. A positive outlook, sufficient training, support staff, and user friendliness were facilitators. Conclusions This study describes strategies implicated in the successful implementation of newly adopted technology in acute care settings. Improved implementation methods and evaluation of implementation processes are necessary for successful adoption of new technology. PMID:25367721

Current, future and potential use of mobile and wearable technologies and social media data in the ABCD study to increase understanding of contributors to child health.

PubMed

Bagot, K S; Matthews, S A; Mason, M; Squeglia, Lindsay M; Fowler, J; Gray, K; Herting, M; May, A; Colrain, I; Godino, J; Tapert, S; Brown, S; Patrick, K

2018-08-01

Mobile and wearable technologies and novel methods of data collection are innovating health-related research. These technologies and methods allow for multi-system level capture of data across environmental, physiological, behavioral, and psychological domains. In the Adolescent Brain Cognitive Development (ABCD) Study, there is great potential for harnessing the acceptability, accessibility, and functionality of mobile and social technologies for in-vivo data capture to precisely measure factors, and interactions between factors, that contribute to childhood and adolescent neurodevelopment and psychosocial and health outcomes. Here we discuss advances in mobile and wearable technologies and methods of analysis of geospatial, ecologic, social network and behavioral data. Incorporating these technologies into the ABCD study will allow for interdisciplinary research on the effects of place, social interactions, environment, and substance use on health and developmental outcomes in children and adolescents. Copyright © 2018. Published by Elsevier Ltd.

A multi points ultrasonic detection method for material flow of belt conveyor

NASA Astrophysics Data System (ADS)

Zhang, Li; He, Rongjun

2018-03-01

For big detection error of single point ultrasonic ranging technology used in material flow detection of belt conveyor when coal distributes unevenly or is large, a material flow detection method of belt conveyor is designed based on multi points ultrasonic counter ranging technology. The method can calculate approximate sectional area of material by locating multi points on surfaces of material and belt, in order to get material flow according to running speed of belt conveyor. The test results show that the method has smaller detection error than single point ultrasonic ranging technology under the condition of big coal with uneven distribution.

Preparing Teachers to Integrate Technology into K-12 Instruction: Comparing a Stand-Alone Technology Course with a Technology-Infused Approach

ERIC Educational Resources Information Center

Buss, Ray R.; Wetzel, Keith; Foulger, Teresa S.; Lindsey, LeeAnn

2015-01-01

We compared the effectiveness of learning technological, pedagogical, and content knowledge (TPACK) domain knowledge in a new technology-infused approach for teaching technology to teacher candidates with a more traditional, stand-alone course. In the new approach, learning to use technology is infused into program methods courses. Candidates all…

A methodology for uncertainty quantification in quantitative technology valuation based on expert elicitation

NASA Astrophysics Data System (ADS)

Akram, Muhammad Farooq Bin

The management of technology portfolios is an important element of aerospace system design. New technologies are often applied to new product designs to ensure their competitiveness at the time they are introduced to market. The future performance of yet-to- be designed components is inherently uncertain, necessitating subject matter expert knowledge, statistical methods and financial forecasting. Estimates of the appropriate parameter settings often come from disciplinary experts, who may disagree with each other because of varying experience and background. Due to inherent uncertain nature of expert elicitation in technology valuation process, appropriate uncertainty quantification and propagation is very critical. The uncertainty in defining the impact of an input on performance parameters of a system makes it difficult to use traditional probability theory. Often the available information is not enough to assign the appropriate probability distributions to uncertain inputs. Another problem faced during technology elicitation pertains to technology interactions in a portfolio. When multiple technologies are applied simultaneously on a system, often their cumulative impact is non-linear. Current methods assume that technologies are either incompatible or linearly independent. It is observed that in case of lack of knowledge about the problem, epistemic uncertainty is the most suitable representation of the process. It reduces the number of assumptions during the elicitation process, when experts are forced to assign probability distributions to their opinions without sufficient knowledge. Epistemic uncertainty can be quantified by many techniques. In present research it is proposed that interval analysis and Dempster-Shafer theory of evidence are better suited for quantification of epistemic uncertainty in technology valuation process. Proposed technique seeks to offset some of the problems faced by using deterministic or traditional probabilistic approaches for uncertainty propagation. Non-linear behavior in technology interactions is captured through expert elicitation based technology synergy matrices (TSM). Proposed TSMs increase the fidelity of current technology forecasting methods by including higher order technology interactions. A test case for quantification of epistemic uncertainty on a large scale problem of combined cycle power generation system was selected. A detailed multidisciplinary modeling and simulation environment was adopted for this problem. Results have shown that evidence theory based technique provides more insight on the uncertainties arising from incomplete information or lack of knowledge as compared to deterministic or probability theory methods. Margin analysis was also carried out for both the techniques. A detailed description of TSMs and their usage in conjunction with technology impact matrices and technology compatibility matrices is discussed. Various combination methods are also proposed for higher order interactions, which can be applied according to the expert opinion or historical data. The introduction of technology synergy matrix enabled capturing the higher order technology interactions, and improvement in predicted system performance.

SITE TECHNOLOGY CAPSULE: UNTERDRUCK-VERDAMPFER- BRUNNEN TECHNOLOGY (UVB) VACUUM VAPORIZING WELL

EPA Science Inventory

The UVB technology is an in situ groundwater remediation technology for aquifers contaminated with compounds amenable to air stripping, and is an alternative method to pump-and-treat remediation of groundwater. The UVB technology is designed to remove VOCs from groundwater by tra...

A technology mapping based on graph of excitations and outputs for finite state machines

NASA Astrophysics Data System (ADS)

Kania, Dariusz; Kulisz, Józef

2017-11-01

A new, efficient technology mapping method of FSMs, dedicated for PAL-based PLDs is proposed. The essence of the method consists in searching for the minimal set of PAL-based logic blocks that cover a set of multiple-output implicants describing the transition and output functions of an FSM. The method is based on a new concept of graph: the Graph of Excitations and Outputs. The proposed algorithm was tested using the FSM benchmarks. The obtained results were compared with the classical technology mapping of FSM.

Working Toward the Very Low Energy Consumption Building of the Future |

Science.gov Websites

systems engineering methods that have transformed other industries, including the aircraft and automobile Merced and United Technologies are studying the use of sensors and occupancy estimating methods to , occupancy dynamics models, and energy control methods. The team will test whether this technology can

Examining Health Professional Educators' Adoption of Learning-Centered Pedagogy and Instructional Technologies

ERIC Educational Resources Information Center

Fox, Traci B.

2014-01-01

This mixed-methods study explored the extent to which health professions educators use instructional technologies and learning-centered pedagogical methods. Within the health professions, there is a lack of data on the pedagogical methods used by health professions educators within the classroom. The purpose of this study was to examine and…

Financing New Technologies, Equipment/Furniture Replacement, and Building Renovation: A Survey Report.

ERIC Educational Resources Information Center

Shirk, Gary M.

1984-01-01

Reports results of survey of methods used by 77 North American academic and public libraries to finance implementation of new technologies, replace equipment and furniture, and renovate buildings. Financing methods used, frequency of use, choice, and range of methods are discussed. Eight references and list of survey participants are appended.…

Approaches for Evaluating the Usability of Assistive Technology Product Prototypes

ERIC Educational Resources Information Center

Choi, Young Mi; Sprigle, Stephen H.

2011-01-01

User input is an important component to help guide designers in producing a more usable product. Evaluation of prototypes is one method of obtaining this input, but methods for evaluating assistive technology prototypes during design have not been adequately described or evaluated. This project aimed to compare different methods of evaluating…

Analysis of Expedited Defense Contracting Methods in the Acquisition of Emerging Technology

DTIC Science & Technology

2016-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT ANALYSIS OF EXPEDITED DEFENSE CONTRACTING METHODS IN THE...CONTRACTING METHODS IN THE ACQUISITION OF EMERGING TECHNOLOGY 5. FUNDING NUMBERS 6. AUTHOR(S) Jacob D. Sabin and Mark K. Zakner 7. PERFORMING...firms. The DOD has authority for applying non-traditional contracting methods to better adapt to this competitive marketplace. This project studied non

Technology Engineering in Science Education: Where Instructional Challenges Interface Nonconforming Productivity to Increase Retention, Enhance Transfer, and Maximize Student Learning

ERIC Educational Resources Information Center

Osler, James E.; Hollowell, Gail P.; Nichols, Stacy M.

2012-01-01

Technology Engineering is an innovative component of a much larger arena of teaching that effectively uses interactive technology as a method of enhancing learning and the learning environment. Using this method to teach science and math content empowers the teacher and enhances the curriculum as the classroom becomes more efficient and effective.…

Teachers' Views about Science and Technology Lesson Effects on the Development of Students' Entrepreneurship Skills

ERIC Educational Resources Information Center

Bacanak, Ahmet

2013-01-01

The purpose of this study was to determine the views of science and technology teachers about the effects of 6th, 7th and 8th grade science and technology courses on students' entrepreneurship skills. In the study, phenomenographic method was used and data were collected through a semi-structured interview method with 8 questions. 5 science and…

Research progress on the brewing techniques of new-type rice wine.

PubMed

Jiao, Aiquan; Xu, Xueming; Jin, Zhengyu

2017-01-15

As a traditional alcoholic beverage, Chinese rice wine (CRW) with high nutritional value and unique flavor has been popular in China for thousands of years. Although traditional production methods had been used without change for centuries, numerous technological innovations in the last decades have greatly impacted on the CRW industry. However, reviews related to the technology research progress in this field are relatively few. This article aimed at providing a brief summary of the recent developments in the new brewing technologies for making CRW. Based on the comparison between the conventional methods and the innovative technologies of CRW brewing, three principal aspects were summarized and sorted, including the innovation of raw material pretreatment, the optimization of fermentation and the reform of sterilization technology. Furthermore, by comparing the advantages and disadvantages of these methods, various issues are addressed related to the prospect of the CRW industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Automated system of devising and choosing economically effective technological processes of heat treatment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kalinin, V.P.; Tkacheva, O.N.

1986-03-01

Heat treatment entails considerable expenditure of power and often requires expensive equipment. One of the fundamental problems arising in the elaboration of heat treatment technology is the selection of the economically optimal process, which also has to ensure the quality of finished parts required by the customer. To correctly determine the expenditures on the basic kinds of resources it is necessary to improve the methods of calculating prime costs and to carry out such a calculation at the earliest stages of the technological preparation of production. A new method of optimizing synthesis of the structure of devising technological processes ofmore » heat treatment using the achievements of cybernetics and the possibilities of computerization is examined in this article. The method makes it possible to analyze in detail the economy of all possible variants of a technological process when one parameter is changed, without recalculating all items of prime cost.« less

ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

DADO MA

2008-07-31

This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linkingmore » them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.« less

Development of a Risk-Based Comparison Methodology of Carbon Capture Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.; Dalton, Angela C.; Dale, Crystal

2014-06-01

Given the varying degrees of maturity among existing carbon capture (CC) technology alternatives, an understanding of the inherent technical and financial risk and uncertainty associated with these competing technologies is requisite to the success of carbon capture as a viable solution to the greenhouse gas emission challenge. The availability of tools and capabilities to conduct rigorous, risk–based technology comparisons is thus highly desirable for directing valuable resources toward the technology option(s) with a high return on investment, superior carbon capture performance, and minimum risk. To address this research need, we introduce a novel risk-based technology comparison method supported by anmore » integrated multi-domain risk model set to estimate risks related to technological maturity, technical performance, and profitability. Through a comparison between solid sorbent and liquid solvent systems, we illustrate the feasibility of estimating risk and quantifying uncertainty in a single domain (modular analytical capability) as well as across multiple risk dimensions (coupled analytical capability) for comparison. This method brings technological maturity and performance to bear on profitability projections, and carries risk and uncertainty modeling across domains via inter-model sharing of parameters, distributions, and input/output. The integration of the models facilitates multidimensional technology comparisons within a common probabilistic risk analysis framework. This approach and model set can equip potential technology adopters with the necessary computational capabilities to make risk-informed decisions about CC technology investment. The method and modeling effort can also be extended to other industries where robust tools and analytical capabilities are currently lacking for evaluating nascent technologies.« less

Rawls's Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration: Potentials and Limitations for the Context of Technological Risks.

PubMed

Doorn, Neelke; Taebi, Behnam

2018-05-01

The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for "upstream engagement" and "responsible innovation," recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders' concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls's wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large.

An Investigation of Technological Pedagogical Content Knowledge, Self-Confidence, and Perception of Pre-Service Middle School Mathematics Teachers towards Instructional Technologies

ERIC Educational Resources Information Center

Karatas, Ilhan; Tunc, Mutlu Piskin; Yilmaz, Nurbanu; Karaci, Gulzade

2017-01-01

Technology provides new methods and approaches for educational activities. Therefore, teachers should improve their ability and knowledge to integrate technology into instruction. The use of technology-based learning environment which is effectively used to improve the technological pedagogical content knowledge of pre-service teachers has a…

BIOMASS DRYING TECHNOLOGIES

EPA Science Inventory

The report examines the technologies used for drying of biomass and the energy requirements of biomass dryers. Biomass drying processes, drying methods, and the conventional types of dryers are surveyed generally. Drying methods and dryer studies using superheated steam as the d...

Smart Money

ERIC Educational Resources Information Center

Ullman, Ellen

2009-01-01

From using virtualization technology to accepting lunch payments online, school districts are seeking money-saving methods. In this article, the author discusses some methods used by school districts that allow them to save money from using virtualization technology to accepting lunch payments online.

FIELD ANALYTICAL SCREENING PROGRAM: PCB METHOD - INNOVATIVE TECHNOLOGY REPORT

EPA Science Inventory

This innovative technology evaluation report (ITER) presents information on the demonstration of the U.S. Environmental Protection Agency (EPA) Region 7 Superfund Field Analytical Screening Program (FASP) method for determining polychlorinated biphenyl (PCB) contamination in soil...

Sonochemical approaches to enhanced oil recovery.

PubMed

Abramov, Vladimir O; Abramova, Anna V; Bayazitov, Vadim M; Altunina, Lyubov K; Gerasin, Artyom S; Pashin, Dmitriy M; Mason, Timothy J

2015-07-01

Oil production from wells reduces with time and the well becomes uneconomic unless enhanced oil recovery (EOR) methods are applied. There are a number of methods currently available and each has specific advantages and disadvantages depending on conditions. Currently there is a big demand for new or improved technologies in this field, the hope is that these might also be applicable to wells which have already been the subject of EOR. The sonochemical method of EOR is one of the most promising methods and is important in that it can also be applied for the treatment of horizontal wells. The present article reports the theoretical background of the developed sonochemical technology for EOR in horizontal wells; describes the requirements to the equipment needed to embody the technology. The results of the first field tests of the technology are reported. Copyright © 2014 Elsevier B.V. All rights reserved.

PRESBYOPIA OPTOMETRY METHOD BASED ON DIOPTER REGULATION AND CHARGE COUPLE DEVICE IMAGING TECHNOLOGY.

PubMed

Zhao, Q; Wu, X X; Zhou, J; Wang, X; Liu, R F; Gao, J

2015-01-01

With the development of photoelectric technology and single-chip microcomputer technology, objective optometry, also known as automatic optometry, is becoming precise. This paper proposed a presbyopia optometry method based on diopter regulation and Charge Couple Device (CCD) imaging technology and, in the meantime, designed a light path that could measure the system. This method projects a test figure to the eye ground and then the reflected image from the eye ground is detected by CCD. The image is then automatically identified by computer and the far point and near point diopters are determined to calculate lens parameter. This is a fully automatic objective optometry method which eliminates subjective factors of the tested subject. Furthermore, it can acquire the lens parameter of presbyopia accurately and quickly and can be used to measure the lens parameter of hyperopia, myopia and astigmatism.

Technology transfer and Rockwell International

NASA Technical Reports Server (NTRS)

Gernand, Joseph

1992-01-01

Two technology partnership models are presented for consideration. The first model posits a government buyer of technology, and the second model posits that the customer is the consumer of the technology. These two models are concerned with methods of and impediments to technology transfer and information dissemination in government/contractor relationships.

Innovative technology transfer of nondestructive evaluation research

Treesearch

Brian Brashaw; Robert J. Ross; Xiping Wang

2008-01-01

Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

NASA Astrophysics Data System (ADS)

Rehmat, Abeera P.; Bailey, Janelle M.

2014-12-01

The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology to create an advantageous learning experience in science classrooms. To understand preservice teachers' conceptions of technology integration, this research study explored 15 elementary science methods students' definitions of technology and their attitudes toward incorporating technology into their teaching. The phenomenological study took place in a science methods course that was based on a constructivist approach to teaching and learning science through science activities and class discussions, with an emphasis on a teacher beliefs framework. Data were collected throughout the semester, including an open-ended pre/post-technology integration survey, lesson plans, and reflections on activities conducted throughout the course. Through a qualitative analysis, we identified improvements in students' technology definitions, increased technology incorporation into science lesson plans, and favorable attitudes toward technology integration in science teaching after instruction. This research project demonstrates that positive changes in beliefs and behaviors relating to technology integration in science instruction among preservice teachers are possible through explicit instruction.

75 FR 1591 - Green Technology Pilot Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-12

... DEPARTMENT OF COMMERCE Patent and Trademark Office Green Technology Pilot Program ACTION: Proposed... methods: E-mail: [email protected] . Include A0651-0062 Green Technology Pilot Program [email protected] in... green technologies, including greenhouse gas reduction. [[Page 1592

Advances in graphene-related technologies: synthesis, devices and outlook.

PubMed

Frazier, R M; Hough, W L; Chopra, N; Hathcock, K W

2012-06-01

Graphene has been the subject of many scientific investigations since exfoliation methods facilitated isolation of the two-dimensional material. During this time, new synthesis methods have been developed which have opened technological opportunities previously hindered by synthetic constraints. An update on the recent advances in graphene-based technologies, including synthesis and applications into electrical, mechanical and thermal uses will be covered. A special focus on the patent space and commercial landscape will be given in an effort to identify current trends and future commercialization of graphene-related technologies.

Evaluating core technology capacity based on an improved catastrophe progression method: the case of automotive industry

NASA Astrophysics Data System (ADS)

Zhao, Shijia; Liu, Zongwei; Wang, Yue; Zhao, Fuquan

2017-01-01

Subjectivity usually causes large fluctuations in evaluation results. Many scholars attempt to establish new mathematical methods to make evaluation results consistent with actual objective situations. An improved catastrophe progression method (ICPM) is constructed to overcome the defects of the original method. The improved method combines the merits of the principal component analysis' information coherence and the catastrophe progression method's none index weight and has the advantage of highly objective comprehensive evaluation. Through the systematic analysis of the influencing factors of the automotive industry's core technology capacity, the comprehensive evaluation model is established according to the different roles that different indices play in evaluating the overall goal with a hierarchical structure. Moreover, ICPM is developed for evaluating the automotive industry's core technology capacity for the typical seven countries in the world, which demonstrates the effectiveness of the method.

Properties of TEM standing waves with E||B

NASA Astrophysics Data System (ADS)

Zaghloul, H.; Buckmaster, H. A.

This paper summarizes the known properties of E∥B TEM standing waves and shows that for such waves (i) E and B cannot be linearly polarized, (ii) E ≠ αB where α is a constant (iii) it is impossible to find a Lorentz frame where E>B, (iv) direction of the propagation vector cannot be inferred from the fields at one point of the space, (v) their behaviour under Lorentz, parity, time-reversal and gauge transformations is proper, (vi) both Lorentz invariants E2 - B2 and E·B are nonzero, (vii) the magnetic helicity may be nonzero, (viii) the magnetic field may be force-free, and (ix) kμFμv ≠ 0. It also shows how electromagnetic waves can be classified using Lorentz invariants. Cet article résume les qualités connues des ondes stationnaires E∥B TEM et montre que pour des ondes parallèles (i) E et B ne peuvent pas être polarisées linéairement, (ii) E ≠ αB où a est une constante, (iii) il est impossible de trouver une construction de Lorentz où E>B, (iv) la direction de propagation d'un vecteur ne peut pas être déduite des opérations à un point d'intervalle, (v) leur conduite sous Lorentz, parité, temps inverse et transformations de jauge est propre, (vi) les deux invariants de Lorentz E2 - B2 et E·B sont non nulles (vii) l'hélice magnétique peut être non nulle (viii) l'opération magnétique peut être de force libre et (ix) KμFμ v ≠ 0. Ceci montre aussi comment les ondes électromagnétiques peuvent être classifiées, en employant les invariants de Lorentz.

Observing multiple populations in globular clusters with the ESO archive: NGC 6388 reloaded

NASA Astrophysics Data System (ADS)

Carretta, Eugenio; Bragaglia, Angela

2018-06-01

The metal-rich and old bulge globular cluster (GC) NGC 6388 is one of the most massive Galactic GCs (M 106 M⊙). However, the spectroscopic properties of its multiple stellar populations rested only on 32 red giants (only 7 of which observed with UVES, the others with GIRAFFE), given the difficulties in observing a rather distant cluster, heavily contaminated by bulge and disc field stars. We bypassed the problem using the resources of the largest telescope facility ever: the European Southern Observatory (ESO) archive. By selecting member stars identified by other programmes, we derive atmospheric parameters and the full set of abundances for 15 species from high-resolution UVES spectra of another 17 red giant branch stars in NGC 6388. We confirm that no metallicity dispersion is detectable in this GC. About 30% of the stars show the primordial composition of first-generation stars, about 20% present an extremely modified second-generation composition, and 50% have an intermediate composition. The stars are clearly distributed in the Al-O and Na-O planes in three discrete groups. We find substantial hints that more than a single class of polluters is required to reproduce the composition of the intermediate component in NGC 6388. In the heavily polluted component the sum Mg+Al increases as Al increases. The sum Mg+Al+Si is constant, and is the fossil record of hot H-burning at temperatures higher than about 70 MK in the first-generation polluters that contributed to form multiple populations in this cluster. Based on observations collected at ESO telescopes under programmes 073.D-0211 (propr ietary), and 073.D-0760, 381.D-0329, 095.D-0834 (archival).

SITE TECHNOLOGY CAPSULE: J.R. SIMPLOT EX-SITU BIOREMEDIATION TECHNOLOGY: DINOSEB

EPA Science Inventory

The J.R. Simplot Ex-Situ Bioremediation Technology is designed to anaerobically degrade nitroaromatic and energetic compounds in soils and liquids without forming identifiable toxic intermediate compounds produced by other biotreatment methods. This technology was evaluated un...

Multi Blending Technology (MBT): mineral processing method for increasing added value of marginal reserve

NASA Astrophysics Data System (ADS)

Agustinus, E. T. S.

2018-02-01

Indonesia's position on the path of ring of fire makes it rich in mineral resources. Nevertheless, in the past, the exploitation of Indonesian mineral resources was uncontrolled resulting in environmental degradation and marginal reserves. Exploitation of excessive mineral resources is very detrimental to the state. Reflecting on the occasion, the management and utilization of Indonesia's mineral resources need to be good in mining practice. The problem is how to utilize the mineral reserve resources effectively and efficiently. Utilization of marginal reserves requires new technologies and processing methods because the old processing methods are inadequate. This paper gives a result of Multi Blending Technology (MBT) Method. The underlying concept is not to do the extraction or refinement but processing through the formulation of raw materials by adding an additive and produce a new material called functional materials. Application of this method becomes important to be summarized into a scientific paper in a book form, so that the information can spread across multiple print media and become focused on and optimized. This book is expected to be used as a reference for stakeholder providing added value to environmentally marginal reserves in Indonesia. The conclusions are that Multi Blending Technology (MBT) Method can be used as a strategy to increase added values effectively and efficiently to marginal reserve minerals and that Multi Blending Technology (MBT) method has been applied to forsterite, Atapulgite Synthesis, Zeoceramic, GEM, MPMO, SMAC and Geomaterial.

Modern methods for the quality management of high-rate melt solidification

NASA Astrophysics Data System (ADS)

Vasiliev, V. A.; Odinokov, S. A.; Serov, M. M.

2016-12-01

The quality management of high-rate melt solidification needs combined solution obtained by methods and approaches adapted to a certain situation. Technological audit is recommended to estimate the possibilities of the process. Statistical methods are proposed with the choice of key parameters. Numerical methods, which can be used to perform simulation under multifactor technological conditions, and an increase in the quality of decisions are of particular importance.

Supercritical Fluid Technologies to Fabricate Proliposomes.

PubMed

Falconer, James R; Svirskis, Darren; Adil, Ali A; Wu, Zimei

2015-01-01

Proliposomes are stable drug carrier systems designed to form liposomes upon addition of an aqueous phase. In this review, current trends in the use of supercritical fluid (SCF) technologies to prepare proliposomes are discussed. SCF methods are used in pharmaceutical research and industry to address limitations associated with conventional methods of pro/liposome fabrication. The SCF solvent methods of proliposome preparation are eco-friendly (known as green technology) and, along with the SCF anti-solvent methods, could be advantageous over conventional methods; enabling better design of particle morphology (size and shape). The major hurdles of SCF methods include poor scalability to industrial manufacturing which may result in variable particle characteristics. In the case of SCF anti-solvent methods, another hurdle is the reliance on organic solvents. However, the amount of solvent required is typically less than that used by the conventional methods. Another hurdle is that most of the SCF methods used have complicated manufacturing processes, although once the setup has been completed, SCF technologies offer a single-step process in the preparation of proliposomes compared to the multiple steps required by many other methods. Furthermore, there is limited research into how proliposomes will be converted into liposomes for the end-user, and how such a product can be prepared reproducibly in terms of vesicle size and drug loading. These hurdles must be overcome and with more research, SCF methods, especially where the SCF acts as a solvent, have the potential to offer a strong alternative to the conventional methods to prepare proliposomes.

A Qualitative Study about Performance Based Assesment Methods Used in Information Technologies Lesson

ERIC Educational Resources Information Center

Daghan, Gökhan; Akkoyunlu, Buket

2014-01-01

In this study, Information Technologies teachers' views and usage cases on performance based assesment methods (PBAMs) are examined. It is aimed to find out which of the PBAMs are used frequently or not used, preference reasons of these methods and opinions about the applicability of them. Study is designed with the phenomenological design which…

Equations with Technology: Different Tools, Different Views

ERIC Educational Resources Information Center

Drijvers, Paul; Barzel, Barbel

2012-01-01

Has technology revolutionised the mathematics classroom, or is it still a device waiting to be exploited for the benefit of the learner? There are applets that will enable the user to solve complex equations at the push of a button. So, does this jeopardise other methods, make other methods redundant, or even diminish other methods in the mind of…

Determining the Effectiveness of Various Delivery Methods in an Information Technology/Information Systems Curriculum

ERIC Educational Resources Information Center

Davis, Gary Alan; Kovacs, Paul J.; Scarpino, John; Turchek, John C.

2010-01-01

The emergence of increasingly sophisticated communication technologies and the media-rich extensions of the World Wide Web have prompted universities to use alternatives to the traditional classroom teaching and learning methods. This demand for alternative delivery methods has led to the development of a wide range of eLearning techniques.…

Internet-Mediated Technologies and Mixed Methods Research: Problems and Prospects

ERIC Educational Resources Information Center

Hesse-Biber, Sharlene; Griffin, Amy J.

2013-01-01

This article provides an examination of a range of mixed methods research projects that employ Internet-mediated technologies (IMT) for data collection. Using a case study approach, this article allows for the uncovering of a process by which IMT are used as a data collection medium in mixed methods praxis. Under the theoretical position of medium…

Data center cooling method

DOEpatents

Chainer, Timothy J.; Dang, Hien P.; Parida, Pritish R.; Schultz, Mark D.; Sharma, Arun

2015-08-11

A method aspect for removing heat from a data center may use liquid coolant cooled without vapor compression refrigeration on a liquid cooled information technology equipment rack. The method may also include regulating liquid coolant flow to the data center through a range of liquid coolant flow values with a controller-apparatus based upon information technology equipment temperature threshold of the data center.

A Different Approach to Have Science and Technology Student-Teachers Gain Varied Methods in Laboratory Applications: A Sample of Computer Assisted POE Application

ERIC Educational Resources Information Center

Saka, Arzu

2012-01-01

The purpose of this study is to develop a new approach and assess the application for the science and technology student-teachers to gain varied laboratory methods in science and technology teaching. It is also aimed to describe the computer-assisted POE application in the subject of "Photosynthesis-Light" developed in the context of…

Oxygen production using solid-state zirconia electrolyte technology

NASA Technical Reports Server (NTRS)

Suitor, Jerry W.; Clark, Douglas J.

1991-01-01

High purity oxygen is required for a number of scientific, medical, and industrial applications. Traditionally, these needs have been met by cryogenic distillation or pressure swing adsorption systems designed to separate oxygen from air. Oxygen separation from air via solid-state zirconia electrolyte technology offers an alternative to these methods. The technology has several advantages over the traditional methods, including reliability, compactness, quiet operation, high purity output, and low power consumption.

JPRS Report, Science & Technology. China: Energy.

DTIC Science & Technology

1992-12-24

desulfurization tech- nology at the present time. The wet method technology accounts for 86 percent of all of the world’s flue gas desulfurization facilities...Limestone-gypsum wet method desulfurization tech- nology Huaneng’s Luohuang Power Plant has already imported two sets of 360MW generator boiler flue gas ...Circulating Fluidized-Bed Technology Development [LinZhaokui, Wang Dun’en, et al; DONGLIGONGCHENG, 15 Oct 92] 27 Selection of Flue

Outdoor module testing and comparison of photovoltaic technologies

NASA Astrophysics Data System (ADS)

Fabick, L. B.; Rifai, R.; Mitchell, K.; Woolston, T.; Canale, J.

A comparison of outdoor test results for several module technologies is presented. The technologies include thin-film silicon:hydrogen alloys (TFS), TFS modules with semitransparent conductor back contacts, and CuInSe2 module prototypes. A method for calculating open-circuit voltage and fill-factor temperature coefficients is proposed. The method relies on the acquisition of large statistical data samples to average effects due to varying insolation level.

Using microwave Doppler radar in automated manufacturing applications

NASA Astrophysics Data System (ADS)

Smith, Gregory C.

Since the beginning of the Industrial Revolution, manufacturers worldwide have used automation to improve productivity, gain market share, and meet growing or changing consumer demand for manufactured products. To stimulate further industrial productivity, manufacturers need more advanced automation technologies: "smart" part handling systems, automated assembly machines, CNC machine tools, and industrial robots that use new sensor technologies, advanced control systems, and intelligent decision-making algorithms to "see," "hear," "feel," and "think" at the levels needed to handle complex manufacturing tasks without human intervention. The investigator's dissertation offers three methods that could help make "smart" CNC machine tools and industrial robots possible: (1) A method for detecting acoustic emission using a microwave Doppler radar detector, (2) A method for detecting tool wear on a CNC lathe using a Doppler radar detector, and (3) An online non-contact method for detecting industrial robot position errors using a microwave Doppler radar motion detector. The dissertation studies indicate that microwave Doppler radar could be quite useful in automated manufacturing applications. In particular, the methods developed may help solve two difficult problems that hinder further progress in automating manufacturing processes: (1) Automating metal-cutting operations on CNC machine tools by providing a reliable non-contact method for detecting tool wear, and (2) Fully automating robotic manufacturing tasks by providing a reliable low-cost non-contact method for detecting on-line position errors. In addition, the studies offer a general non-contact method for detecting acoustic emission that may be useful in many other manufacturing and non-manufacturing areas, as well (e.g., monitoring and nondestructively testing structures, materials, manufacturing processes, and devices). By advancing the state of the art in manufacturing automation, the studies may help stimulate future growth in industrial productivity, which also promises to fuel economic growth and promote economic stability. The study also benefits the Department of Industrial Technology at Iowa State University and the field of Industrial Technology by contributing to the ongoing "smart" machine research program within the Department of Industrial Technology and by stimulating research into new sensor technologies within the University and within the field of Industrial Technology.

Rapid Diagnosis of Bloodstream Infections with PCR Followed by Mass Spectrometry

PubMed Central

Jordana-Lluch, Elena; Carolan, Heather E.; Giménez, Montserrat; Sampath, Rangarajan; Ecker, David J.; Quesada, M. Dolores; Mòdol, Josep M.; Arméstar, Fernando; Blyn, Lawrence B.; Cummins, Lendell L.; Ausina, Vicente; Martró, Elisa

2013-01-01

Achieving a rapid microbiological diagnosis is crucial for decreasing morbidity and mortality of patients with a bloodstream infection, as it leads to the administration of an appropriate empiric antimicrobial therapy. Molecular methods may offer a rapid alternative to conventional microbiological diagnosis involving blood culture. In this study, the performance of a new technology that uses broad-spectrum PCR coupled with mass spectrometry (PCR/ESI-MS) was evaluated for the detection of microorganisms directly from whole blood. A total of 247 whole blood samples and paired blood cultures were prospectively obtained from 175 patients with a suspicion of sepsis. Both sample types were analyzed using the PCR/ESI-MS technology, and the results were compared with those obtained by conventional identification methods. The overall agreement between conventional methods and PCR/ESI-MS performed in blood culture aliquots was 94.2% with 96.8% sensitivity and 98.5% specificity for the molecular method. When comparing conventional methods with PCR/ESI-MS performed in whole blood specimens, the overall agreement was 77.1% with 50% sensitivity and 93.8% specificity for the molecular method. Interestingly, the PCR/ESI-MS technology led to the additional identification of 13 pathogens that were not found by conventional methods. Using the PCR/ESI-MS technology the microbiological diagnosis of bloodstream infections could be anticipated in about half of the patients in our setting, including a small but significant proportion of patients newly diagnosed. Thus, this promising technology could be very useful for the rapid diagnosis of sepsis in combination with traditional methods. PMID:23626775

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

PubMed

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

HEADROOM BEYOND THE QUALITY- ADJUSTED LIFE-YEAR: THE CASE OF COMPLEX PEDIATRIC NEUROLOGY.

PubMed

van Nimwegen, Kirsten J M; Lilford, Richard J; van der Wilt, Gert J; Grutters, Janneke P C

2017-01-01

The headroom method was introduced for the very early evaluation of the potential value of new technologies. It allows for establishing a ceiling price for technologies to still be cost-effective by combining the maximum effect a technology might yield, the maximum willingness-to-pay (WTP) for this effect, and potential downstream expenses and savings. Although the headroom method is QALY-based, not all innovations are expected to result in QALY gain. This study explores the feasibility and usefulness of the headroom method in the evaluation of technologies that are unlikely to result in QALY gain. This will be illustrated with the diagnostic trajectory of complex pediatric neurology (CPN). Our headroom analysis showed a large room for improvement in the current diagnostic trajectory of CPN in terms of diagnostic yield. Combining this with a maximum WTP value for an additional diagnosis and the potential downstream expenses and savings, resulted in a total headroom of €15,028. This indicates that a new technology in this particular diagnostic trajectory, might be cost-effective as long as its costs do not exceed €15,028. The headroom method seems a useful tool in the very early evaluation of medical technologies, also in cases when immediate QALY gain is unlikely. It allows for allocating healthcare resources to those technologies that are most promising. It should be kept in mind, however, that the headroom assumes an optimistic scenario, and for that reason cannot guarantee future cost-effectiveness. It might be most useful for ruling out those technologies that are unlikely to be cost-effective.

Technologies for Foreign Language Learning: A Review of Technology Types and Their Effectiveness

ERIC Educational Resources Information Center

Golonka, Ewa M.; Bowles, Anita R.; Frank, Victor M.; Richardson, Dorna L.; Freynik, Suzanne

2014-01-01

This review summarizes evidence for the effectiveness of technology use in foreign language (FL) learning and teaching, with a focus on empirical studies that compare the use of newer technologies with more traditional methods or materials. The review of over 350 studies (including classroom-based technologies, individual study tools,…

A Professional Learning Program Designed to Increase K-12 Teachers' Instructional Technology Use

ERIC Educational Resources Information Center

Spencer, Lisa A.

2014-01-01

Despite the ready availability of many instructional-technology resources, many teachers in the researched Maryland school district are uncomfortable using technology to deliver content. This concurrent mixed methods case study examined the impact of Sharing Technology with Educators Program (STEP) on 269 K-12 teachers' technology use. The study…

A Qualitative Study of Technology-Based Training in Organizations that Hire Agriculture and Life Sciences Students

ERIC Educational Resources Information Center

Bedgood, Leslie; Murphrey, Theresa Pesl; Dooley, Kim E.

2008-01-01

Technological advances have created unlimited opportunities in education. Training and technology have merged to create new methods referred to as technology-based training. The purpose of this study was to identify organizations that hire agriculture and life sciences students for positions involving technology-based training and identify…

Technology Familiarization to Preservice Teachers: Factors that Influence Teacher Educators' Technology Decisions

ERIC Educational Resources Information Center

Kalonde, Gilbert; Mousa, Rabab

2016-01-01

The purpose of this study was to investigate factors that influence teacher educators' technology decisions in methods courses. Research has shown various reasons why teachers use different types of technologies and not able to integrate certain technologies. However, this study focused on the source of teachers' instructional technology…

Application of BIM Technology in Building Water Supply and Drainage Design

NASA Astrophysics Data System (ADS)

Wei, Tianyun; Chen, Guiqing; Wang, Junde

2017-12-01

Through the application of BIM technology, the idea of building water supply and drainage designers can be related to the model, the various influencing factors to affect water supply and drainage design can be considered more comprehensively. BIM(Building information model) technology assist in improving the design process of building water supply and drainage, promoting the building water supply and drainage planning, enriching the building water supply and drainage design method, improving the water supply and drainage system design level and building quality. Combined with fuzzy comprehensive evaluation method to analyze the advantages of BIM technology in building water supply and drainage design. Therefore, application prospects of BIM technology are very worthy of promotion.

Managing Technology Is Different.

ERIC Educational Resources Information Center

Levinson, Eliot; Grohe, Barbara

2002-01-01

Discusses methods that school superintendents can use to manage technology issues in their schools beyond traditional delegation. Highlights include participation more than delegation to a technology coordinator; identifying the right problems; determining what to make and what to buy; and the need for continual technology funding. (LRW)

The engagement of children with disabilities in health-related technology design processes: identifying methodology.

PubMed

Allsop, Matthew J; Holt, Raymond J; Levesley, Martin C; Bhakta, Bipinchandra

2010-01-01

This review aims to identify research methodology that is suitable for involving children with disabilities in the design of healthcare technology, such as assistive technology and rehabilitation equipment. A review of the literature included the identification of methodology that is available from domains outside of healthcare and suggested a selection of available methods. The need to involve end users within the design of healthcare technology was highlighted, with particular attention to the need for greater levels of participation from children with disabilities within all healthcare research. Issues that may arise when trying to increase such involvement included the need to consider communication via feedback and tailored information, the need to measure levels of participation occurring in current research, and caution regarding the use of proxy information. Additionally, five suitable methods were highlighted that are available for use with children with disabilities in the design of healthcare technology. The methods identified in the review need to be put into practice to establish effective and, if necessary, novel ways of designing healthcare technology when end users are children with disabilities.

An access technology delivery protocol for children with severe and multiple disabilities: a case demonstration.

PubMed

Mumford, Leslie; Lam, Rachel; Wright, Virginia; Chau, Tom

2014-08-01

This study applied response efficiency theory to create the Access Technology Delivery Protocol (ATDP), a child and family-centred collaborative approach to the implementation of access technologies. We conducted a descriptive, mixed methods case study to demonstrate the ATDP method with a 12-year-old boy with no reliable means of access to an external device. Evaluations of response efficiency, satisfaction, goal attainment, technology use and participation were made after 8 and 16 weeks of training with a custom smile-based access technology. At the 16 week mark, the new access technology offered better response quality; teacher satisfaction was high; average technology usage was 3-4 times per week for up to 1 h each time; switch sensitivity and specificity reached 78% and 64%, respectively, and participation scores increased by 38%. This case supports further development and testing of the ATDP with additional children with multiple or severe disabilities.

A Meta-analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

NASA Astrophysics Data System (ADS)

Zhang, Lin

2014-02-01

Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to different technology features? And how can pieces of qualitative and quantitative results be integrated to achieve a broader understanding of technology designs? To address these issues, this paper proposes a meta-analysis method. Detailed explanations about the structure of the methodology and its scientific mechanism are provided for discussions and suggestions. This paper ends with an in-depth discussion on the concerns and questions that educational researchers might raise, such as how this methodology takes care of learning contexts.

Past speculations of future health technologies: a description of technologies predicted in 15 forecasting studies published between 1986 and 2010

PubMed Central

Doos, Lucy; Packer, Claire; Ward, Derek; Simpson, Sue; Stevens, Andrew

2017-01-01

Objective To describe and classify health technologies predicted in forecasting studies. Design and methods A portrait describing health technologies predicted in 15 forecasting studies published between 1986 and 2010 that were identified in a previous systematic review. Health technologies are classified according to their type, purpose and clinical use; relating these to the original purpose and timing of the forecasting studies. Data sources All health-related technologies predicted in 15 forecasting studies identified in a previously published systematic review. Main outcome measure Outcomes related to (1) each forecasting study including country, year, intention and forecasting methods used and (2) the predicted technologies including technology type, purpose, targeted clinical area and forecast timeframe. Results Of the 896 identified health-related technologies, 685 (76.5%) were health technologies with an explicit or implied health application and included in our study. Of these, 19.1% were diagnostic or imaging tests, 14.3% devices or biomaterials, 12.6% information technology systems, eHealth or mHealth and 12% drugs. The majority of the technologies were intended to treat or manage disease (38.1%) or diagnose or monitor disease (26.1%). The most frequent targeted clinical areas were infectious diseases followed by cancer, circulatory and nervous system disorders. The most frequent technology types were for: infectious diseases—prophylactic vaccines (45.8%), cancer—drugs (40%), circulatory disease—devices and biomaterials (26.3%), and diseases of the nervous system—equally devices and biomaterials (25%) and regenerative medicine (25%). The mean timeframe for forecasting was 11.6 years (range 0–33 years, median=10, SD=6.6). The forecasting timeframe significantly differed by technology type (p=0.002), the intent of the forecasting group (p<0.001) and the methods used (p<001). Conclusion While description and classification of predicted health-related technologies is crucial in preparing healthcare systems for adopting new innovations, further work is needed to test the accuracy of predictions made. PMID:28760796

Research of an optimization design method of integral imaging three-dimensional display system

NASA Astrophysics Data System (ADS)

Gao, Hui; Yan, Zhiqiang; Wen, Jun; Jiang, Guanwu

2016-03-01

The information warfare needs a highly transparent environment of battlefield, it follows that true three-dimensional display technology has obvious advantages than traditional display technology in the current field of military science and technology. It also focuses on the research progress of lens array imaging technology and aims at what restrict the development of integral imaging, main including low spatial resolution, narrow depth range and small viewing angle. This paper summarizes the principle, characteristics and development history of the integral imaging. A variety of methods are compared and analyzed that how to improve the resolution, extend depth of field, increase scope and eliminate the artifact aiming at problems currently. And makes a discussion about the experimental results of the research, comparing the display performance of different methods.

Real-time use of the iPad by third-year medical students for clinical decision support and learning: a mixed methods study

PubMed Central

Nuss, Michelle A.; Hill, Janette R.; Cervero, Ronald M.; Gaines, Julie K.; Middendorf, Bruce F.

2014-01-01

Purpose Despite widespread use of mobile technology in medical education, medical students’ use of mobile technology for clinical decision support and learning is not well understood. Three key questions were explored in this extensive mixed methods study: 1) how medical students used mobile technology in the care of patients, 2) the mobile applications (apps) used and 3) how expertise and time spent changed overtime. Methods This year-long (July 2012–June 2013) mixed methods study explored the use of the iPad, using four data collection instruments: 1) beginning and end-of-year questionnaires, 2) iPad usage logs, 3) weekly rounding observations, and 4) weekly medical student interviews. Descriptive statistics were generated for the questionnaires and apps reported in the usage logs. The iPad usage logs, observation logs, and weekly interviews were analyzed via inductive thematic analysis. Results Students predominantly used mobile technology to obtain real-time patient data via the electronic health record (EHR), to access medical knowledge resources for learning, and to inform patient care. The top four apps used were Epocrates®, PDF Expert®, VisualDx®, and Micromedex®. The majority of students indicated that their use (71%) and expertise (75%) using mobile technology grew overtime. Conclusions This mixed methods study provides substantial evidence that medical students used mobile technology for clinical decision support and learning. Integrating its use into the medical student's daily workflow was essential for achieving these outcomes. Developing expertise in using mobile technology and various apps was critical for effective and efficient support of real-time clinical decisions. PMID:25317266

Passive Infrared Surveillance: New Methods of Analysis

DTIC Science & Technology

1979-09-24

f NRL Memorandum Report 4078 EOTPO Report 55 Passive Infrared Surveillance: New Methods of Analysis RICHARD A. STINBERG Electro- Optical Technology...Progrant Offtcw Management Information and Special Programs Organizallon September 24, 1979 KL I -r- ’I . ,3 ELECTRO- OPTICAL TECHNOLOGY PROGRAM OFFICE...by Dr.Joh M.Ma1a1u m ,J, I’ Head, Bleutro- Optical Technology Program Office SECURITY CLASSIPICATION Of THII4 PAGE (Wim"u Data Bille) REPORT

Developments at the Advanced Design Technologies Testbed

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

2003-01-01

A report presents background and historical information, as of August 1998, on the Advanced Design Technologies Testbed (ADTT) at Ames Research Center. The ADTT is characterized as an activity initiated to facilitate improvements in aerospace design processes; provide a proving ground for product-development methods and computational software and hardware; develop bridging methods, software, and hardware that can facilitate integrated solutions to design problems; and disseminate lessons learned to the aerospace and information technology communities.

Development of high purity large forgings for nuclear power plants

NASA Astrophysics Data System (ADS)

Tanaka, Yasuhiko; Sato, Ikuo

2011-10-01

The recent increase in the size of energy plants has been supported by the development of manufacturing technology for high purity large forgings for the key components of the plant. To assure the reliability and performance of the large forgings, refining technology to make high purity steels, casting technology for gigantic ingots, forging technology to homogenize the material and consolidate porosity are essential, together with the required heat treatment and machining technologies. To meet these needs, the double degassing method to reduce impurities, multi-pouring methods to cast the gigantic ingots, vacuum carbon deoxidization, the warm forging process and related technologies have been developed and further improved. Furthermore, melting facilities including vacuum induction melting and electro slag re-melting furnaces have been installed. By using these technologies and equipment, large forgings have been manufactured and shipped to customers. These technologies have also been applied to the manufacture of austenitic steel vessel components of the fast breeder reactors and components for fusion experiments.

Review of infrared scene projector technology-1993

NASA Astrophysics Data System (ADS)

Driggers, Ronald G.; Barnard, Kenneth J.; Burroughs, E. E.; Deep, Raymond G.; Williams, Owen M.

1994-07-01

The importance of testing IR imagers and missile seekers with realistic IR scenes warrants a review of the current technologies used in dynamic infrared scene projection. These technologies include resistive arrays, deformable mirror arrays, mirror membrane devices, liquid crystal light valves, laser writers, laser diode arrays, and CRTs. Other methods include frustrated total internal reflection, thermoelectric devices, galvanic cells, Bly cells, and vanadium dioxide. A description of each technology is presented along with a discussion of their relative benefits and disadvantages. The current state of each methodology is also summarized. Finally, the methods are compared and contrasted in terms of their performance parameters.

Views of Teachers on the Use of Drama Method in Science and Technology Courses

ERIC Educational Resources Information Center

Duban, Nil Yildiz; Duzgun, Merve Evsen

2013-01-01

The aim of this study is to identify the views of the teachers on the use of drama as a teaching method in the science and technology courses. In the current study, qualitative research method was used. The data were collected through semi-structured interviews. The participants of the study were selected via maximum variation sampling. The…

An Application of Flipped Classroom Method in the Instructional Technologies and Material Development Course

ERIC Educational Resources Information Center

Özpinar, Ilknur; Yenmez, Arzu Aydogan; Gökçe, Semirhan

2016-01-01

A natural outcome of change in technology, new approaches towards teaching and learning have emerged and the applicability of the flipped classroom method, a new educational strategy, in the field of education has started to be discussed. It was aimed with the study to examine the effect of using flipped classroom method in academic achievements…

Access is Not Enough: A Collaborative Autoethnographic Study of Affordances and Challenges of Teacher Educators' iPad Integration in Elementary Education Methods Courses

ERIC Educational Resources Information Center

Vasinda, Sheri; Ryter, Di Ann; Hathcock, Stephanie; Wang, Qiuying

2017-01-01

Research indicates that preservice teachers' understandings of how to integrate technology into their classrooms are dependent upon experience in their university methods courses and in their field placements. These findings place a new responsibility on teacher educators for modeling effective integration of technology into methods courses. This…

Using Aerospace Technology To Design Orthopedic Implants

NASA Technical Reports Server (NTRS)

Saravanos, D. A.; Mraz, P. J.; Davy, D. T.

1996-01-01

Technology originally developed to optimize designs of composite-material aerospace structural components used to develop method for optimizing designs of orthopedic implants. Development effort focused on designing knee implants, long-term goal to develop method for optimizing designs of orthopedic implants in general.

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

Preparation of construction specifications, contract documents, field testing, educational materials, and course offerings for trenchless construction

DOT National Transportation Integrated Search

2005-10-01

Trenchless technology offers methods by which underground utilities may be installed without damage to overlying pavement, if proper precautions are observed. In the past ten years, repeated improvements in technology, materials, and methods have adv...

DEMONSTRATION BULLETIN: COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC.

EPA Science Inventory

The Filter Flow Technology, Inc. (FFT) Colloid Polishing Filter Method (CPFM) was tested as a transportable, trailer mounted, system that uses sorption and chemical complexing phenomena to remove heavy metals and nontritium radionuclides from water. Contaminated waters can be pro...

Rawls’s Wide Reflective Equilibrium as a Method for Engaged Interdisciplinary Collaboration

PubMed Central

Taebi, Behnam

2017-01-01

The introduction of new technologies in society is sometimes met with public resistance. Supported by public policy calls for “upstream engagement” and “responsible innovation,” recent years have seen a notable rise in attempts to attune research and innovation processes to societal needs, so that stakeholders’ concerns are taken into account in the design phase of technology. Both within the social sciences and in the ethics of technology, we see many interdisciplinary collaborations being initiated that aim to address tensions between various normative expectations about science and engineering and the actual outcomes. However, despite pleas to integrate social science research into the ethics of technology, effective normative models for assessing technologies are still scarce. Rawls’s wide reflective equilibrium (WRE) is often mentioned as a promising approach to integrate insights from the social sciences in the normative analysis of concrete cases, but an in-depth discussion of how this would work in practice is still lacking. In this article, we explore to what extent the WRE method can be used in the context of technology development. Using cases in engineering and technology development, we discuss three issues that are currently neglected in the applied ethics literature on WRE. The first issue concerns the operationalization of abstract background theories to moral principles. The second issue concerns the inclusiveness of the method and the demand for openness. The third issue is how to establish whether or not an equilibrium has been reached. These issues should be taken into account when applying the methods to real-world cases involving technological risks. Applying the WRE method in the context of engaged interdisciplinary collaboration requires sensitivity for issues of power and representativeness to properly deal with the dynamics between the technical and normative researchers involved as well as society at large. PMID:29657348

Personalized Exposure Assessment: Promising Approaches for Human Environmental Health Research

PubMed Central

Weis, Brenda K.; Balshaw, David; Barr, John R.; Brown, David; Ellisman, Mark; Lioy, Paul; Omenn, Gilbert; Potter, John D.; Smith, Martyn T.; Sohn, Lydia; Suk, William A.; Sumner, Susan; Swenberg, James; Walt, David R.; Watkins, Simon; Thompson, Claudia; Wilson, Samuel H.

2005-01-01

New technologies and methods for assessing human exposure to chemicals, dietary and lifestyle factors, infectious agents, and other stressors provide an opportunity to extend the range of human health investigations and advance our understanding of the relationship between environmental exposure and disease. An ad hoc Committee on Environmental Exposure Technology Development was convened to identify new technologies and methods for deriving personalized exposure measurements for application to environmental health studies. The committee identified a “toolbox” of methods for measuring external (environmental) and internal (biologic) exposure and assessing human behaviors that influence the likelihood of exposure to environmental agents. The methods use environmental sensors, geographic information systems, biologic sensors, toxicogenomics, and body burden (biologic) measurements. We discuss each of the methods in relation to current use in human health research; specific gaps in the development, validation, and application of the methods are highlighted. We also present a conceptual framework for moving these technologies into use and acceptance by the scientific community. The framework focuses on understanding complex human diseases using an integrated approach to exposure assessment to define particular exposure–disease relationships and the interaction of genetic and environmental factors in disease occurrence. Improved methods for exposure assessment will result in better means of monitoring and targeting intervention and prevention programs. PMID:16002370

Overview of Probabilistic Methods for SAE G-11 Meeting for Reliability and Uncertainty Quantification for DoD TACOM Initiative with SAE G-11 Division

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.

2003-01-01

The SAE G-11 RMSL Division and Probabilistic Methods Committee meeting during October 6-8 at the Best Western Sterling Inn, Sterling Heights (Detroit), Michigan is co-sponsored by US Army Tank-automotive & Armaments Command (TACOM). The meeting will provide an industry/government/academia forum to review RMSL technology; reliability and probabilistic technology; reliability-based design methods; software reliability; and maintainability standards. With over 100 members including members with national/international standing, the mission of the G-11's Probabilistic Methods Committee is to "enable/facilitate rapid deployment of probabilistic technology to enhance the competitiveness of our industries by better, faster, greener, smarter, affordable and reliable product development."

Research on UAV Intelligent Obstacle Avoidance Technology During Inspection of Transmission Line

NASA Astrophysics Data System (ADS)

Wei, Chuanhu; Zhang, Fei; Yin, Chaoyuan; Liu, Yue; Liu, Liang; Li, Zongyu; Wang, Wanguo

Autonomous obstacle avoidance of unmanned aerial vehicle (hereinafter referred to as UAV) in electric power line inspection process has important significance for operation safety and economy for UAV intelligent inspection system of transmission line as main content of UAV intelligent inspection system on transmission line. In the paper, principles of UAV inspection obstacle avoidance technology of transmission line are introduced. UAV inspection obstacle avoidance technology based on particle swarm global optimization algorithm is proposed after common obstacle avoidance technologies are studied. Stimulation comparison is implemented with traditional UAV inspection obstacle avoidance technology which adopts artificial potential field method. Results show that UAV inspection strategy of particle swarm optimization algorithm, adopted in the paper, is prominently better than UAV inspection strategy of artificial potential field method in the aspects of obstacle avoidance effect and the ability of returning to preset inspection track after passing through the obstacle. An effective method is provided for UAV inspection obstacle avoidance of transmission line.

Cadastral data model established and perfected with 4S technology

NASA Astrophysics Data System (ADS)

He, Beijing; He, Jiang; He, Jianpeng

1998-08-01

Considering China's social essential system and the actual case of the formation of cadastral information in urban and rural area, and based on the 4S technology and the theory and method of canton's GPS geodetic data bench developed by the authors, we thoroughly research on some correlative technical problems about establishing and perfecting all-level's microcosmic cadastral data model (called model in the following) once again. Such problems as the following are included: cadastral, feature and topographic information and its modality and expressing method, classifying and grading the model, coordinate system to be selected, data basis for the model, the collecting method and digitalization of information, database's structural model, mathematical model and the establishing technology of 3 or more dimensional model, dynamic monitoring of and the development and application of the model. Then, the domestic and overseas application prospect is revealed. It also has the tendency to intrude markets cooperated with 'data bench' technology or RS image maps' all-analysis digital surveying and mapping technology.

Emerging Technologies for Assembly of Microscale Hydrogels

PubMed Central

Kavaz, Doga; Demirel, Melik C.; Demirci, Utkan

2013-01-01

Assembly of cell encapsulating building blocks (i.e., microscale hydrogels) has significant applications in areas including regenerative medicine, tissue engineering, and cell-based in vitro assays for pharmaceutical research and drug discovery. Inspired by the repeating functional units observed in native tissues and biological systems (e.g., the lobule in liver, the nephron in kidney), assembly technologies aim to generate complex tissue structures by organizing microscale building blocks. Novel assembly technologies enable fabrication of engineered tissue constructs with controlled properties including tunable microarchitectural and predefined compositional features. Recent advances in micro- and nano-scale technologies have enabled engineering of microgel based three dimensional (3D) constructs. There is a need for high-throughput and scalable methods to assemble microscale units with a complex 3D micro-architecture. Emerging assembly methods include novel technologies based on microfluidics, acoustic and magnetic fields, nanotextured surfaces, and surface tension. In this review, we survey emerging microscale hydrogel assembly methods offering rapid, scalable microgel assembly in 3D, and provide future perspectives and discuss potential applications. PMID:23184717

Wind tunnel technology for the development of future commercial aircraft

NASA Technical Reports Server (NTRS)

Szodruch, J.

1986-01-01

Requirements for new technologies in the area of civil aircraft design are mainly related to the high cost involved in the purchase of modern, fuel saving aircraft. A second important factor is the long term rise in the price of fuel. The demonstration of the benefits of new technologies, as far as these are related to aerodynamics, will,for the foreseeable future, still be based on wind tunnel measurements. Theoretical computation methods are very successfully used in design work, wing optimization, and an estimation of the Reynolds number effect. However, wind tunnel tests are still needed to verify the feasibility of the considered concepts. Along with other costs, the cost for the wind tunnel tests needed for the development of an aircraft is steadily increasing. The present investigation is concerned with the effect of numerical aerodynamics and civil aircraft technology on the development of wind tunnels. Attention is given to the requirements for the wind tunnel, investigative methods, measurement technology, models, and the relation between wind tunnel experiments and theoretical methods.

Development of Pre-Service Chemistry Teachers' Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Cetin-Dindar, Ayla; Boz, Yezdan; Sonmez, Demet Yildiran; Celep, Nilgun Demirci

2018-01-01

In this study, a mixed-method design was employed to investigate pre-service chemistry teachers' Technological Pedagogical Content Knowledge (TPACK) development. For effective technology integration in instruction, knowledge about technology is not enough; teachers should have different knowledge types which are content, pedagogical, and…

77 FR 14766 - Patents for Humanity Program (Formerly Humanitarian Program)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-13

... information from applicants that describe what actions they have taken with their patented technology to...: Medical Technology, Food and Nutrition, Clean Technology, and Information Technology. It is expected that.... ADDRESSES: You may submit comments by any of the following methods: Email: Information[email protected

COLLOID POLISHING FILTER METHOD - FILTER FLOW TECHNOLOGY, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

The CPFM technology is designed to remove trace to moderate levels of nontritium radionuclides and heavy metal pollutants from water. The technology uses a proprietary compound that consists of inorganic, oxide-based granules. This mixed is designed to remove heavy metals and rad...

[Nasal submicron emulsion of Scutellariae Radix extract preparation technology research based on phase transfer of solute technology].

PubMed

Shi, Ya-jun; Shi, Jun-hui; Chen, Shi-bin; Yang, Ming

2015-07-01

Based on the demand of nasal drug delivery high drug loadings, using the unique phase transfer of solute, integrating the phospholipid complex preparation and submicron emulsion molding process of Scutellariae Radix extract, the study obtained the preparation of the high drug loadings submicron emulsion of Scutellariae Radix extract. In the study of drug solution dispersion method, the uniformity of drug dispersed as the evaluation index, the traditional mixing method, grinding, homogenate and solute phase transfer technology were investigated, and the solute phase transfer technology was adopted in the last. With the adoption of new technology, the drug loading capacity reached 1.33% (phospholipid complex was 4%). The drug loading capacity was improved significantly. The transfer of solute method and timing were studied as follows,join the oil phase when the volume of phospholipid complex anhydrous ethanol solution remaining 30%, the solute phase transfer was completed with the continued recycling of anhydrous ethanol. After drug dissolved away to oil phase, the preparation technology of colostrum was determined with the evaluation index of emulsion droplet form. The particle size of submicron emulsion, PDI and stability parameters were used as evaluation index, orthogonal methodology were adopted to optimize the submicron emulsion ingredient and main influential factors of high pressure homogenization technology. The optimized preparation technology of Scutellariae Radix extract nasal submicron emulsion is practical and stable.

A survey of enabling technologies in synthetic biology

PubMed Central

2013-01-01

Background Realizing constructive applications of synthetic biology requires continued development of enabling technologies as well as policies and practices to ensure these technologies remain accessible for research. Broadly defined, enabling technologies for synthetic biology include any reagent or method that, alone or in combination with associated technologies, provides the means to generate any new research tool or application. Because applications of synthetic biology likely will embody multiple patented inventions, it will be important to create structures for managing intellectual property rights that best promote continued innovation. Monitoring the enabling technologies of synthetic biology will facilitate the systematic investigation of property rights coupled to these technologies and help shape policies and practices that impact the use, regulation, patenting, and licensing of these technologies. Results We conducted a survey among a self-identifying community of practitioners engaged in synthetic biology research to obtain their opinions and experiences with technologies that support the engineering of biological systems. Technologies widely used and considered enabling by survey participants included public and private registries of biological parts, standard methods for physical assembly of DNA constructs, genomic databases, software tools for search, alignment, analysis, and editing of DNA sequences, and commercial services for DNA synthesis and sequencing. Standards and methods supporting measurement, functional composition, and data exchange were less widely used though still considered enabling by a subset of survey participants. Conclusions The set of enabling technologies compiled from this survey provide insight into the many and varied technologies that support innovation in synthetic biology. Many of these technologies are widely accessible for use, either by virtue of being in the public domain or through legal tools such as non-exclusive licensing. Access to some patent protected technologies is less clear and use of these technologies may be subject to restrictions imposed by material transfer agreements or other contract terms. We expect the technologies considered enabling for synthetic biology to change as the field advances. By monitoring the enabling technologies of synthetic biology and addressing the policies and practices that impact their development and use, our hope is that the field will be better able to realize its full potential. PMID:23663447

Semantics and technologies in modern design of interior stairs

NASA Astrophysics Data System (ADS)

Kukhta, M.; Sokolov, A.; Pelevin, E.

2015-10-01

Use of metal in the design of interior stairs presents new features for shaping, and can be implemented using different technologies. The article discusses the features of design and production technologies of forged metal spiral staircase considering the image semantics based on the historical and cultural heritage. To achieve the objective was applied structural- semantic method (to identify the organization of structure and semantic features of the artistic image), engineering methods (to justify the construction of the object), anthropometry method and ergonomics (to provide usability), methods of comparative analysis (to reveale the features of the way the ladder in different periods of culture). According to the research results are as follows. Was revealed the semantics influence on the design of interior staircase that is based on the World Tree image. Also was suggested rational calculation of steps to ensure the required strength. And finally was presented technology, providing the realization of the artistic image. In the practical part of the work is presented version of forged staircase.

A combined approach of AHP and TOPSIS methods applied in the field of integrated software systems

NASA Astrophysics Data System (ADS)

Berdie, A. D.; Osaci, M.; Muscalagiu, I.; Barz, C.

2017-05-01

Adopting the most appropriate technology for developing applications on an integrated software system for enterprises, may result in great savings both in cost and hours of work. This paper proposes a research study for the determination of a hierarchy between three SAP (System Applications and Products in Data Processing) technologies. The technologies Web Dynpro -WD, Floorplan Manager - FPM and CRM WebClient UI - CRM WCUI are multi-criteria evaluated in terms of the obtained performances through the implementation of the same web business application. To establish the hierarchy a multi-criteria analysis model that combines the AHP (Analytic Hierarchy Process) and the TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods was proposed. This model was built with the help of the SuperDecision software. This software is based on the AHP method and determines the weights for the selected sets of criteria. The TOPSIS method was used to obtain the final ranking and the technologies hierarchy.

A study on new method of noninvasive esophageal venous pressure measurement based on the airflow and laser detection technology.

PubMed

Hu, Chenghuan; Huang, Feizhou; Zhang, Rui; Zhu, Shaihong; Nie, Wanpin; Liu, Xunyang; Liu, Yinglong; Li, Peng

2015-01-01

Using optics combined with automatic control and computer real-time image detection technology, a novel noninvasive method of noncontact pressure manometry was developed based on the airflow and laser detection technology in this study. The new esophageal venous pressure measurement system was tested in-vitro experiments. A stable and adjustable pulse stream was produced from a self-developed pump and a laser emitting apparatus could generate optical signals which can be captured by image acquisition and analysis system program. A synchronization system simultaneous measured the changes of air pressure and the deformation of the vein wall to capture the vascular deformation while simultaneously record the current pressure value. The results of this study indicated that the pressure values tested by the new method have good correlation with the actual pressure value in animal experiments. The new method of noninvasive pressure measurement based on the airflow and laser detection technology is accurate, feasible, repeatable and has a good application prospects.

Orbit transfer rocket engine technology program: Automated preflight methods concept definition

NASA Technical Reports Server (NTRS)

Erickson, C. M.; Hertzberg, D. W.

1991-01-01

The possibility of automating preflight engine checkouts on orbit transfer engines is discussed. The minimum requirements in terms of information and processing necessary to assess the engine'e integrity and readiness to perform its mission were first defined. A variety of ways for remotely obtaining that information were generated. The sophistication of these approaches varied from a simple preliminary power up, where the engine is fired up for the first time, to the most advanced approach where the sensor and operational history data system alone indicates engine integrity. The critical issues and benefits of these methods were identified, outlined, and prioritized. The technology readiness of each of these automated preflight methods were then rated on a NASA Office of Exploration scale used for comparing technology options for future mission choices. Finally, estimates were made of the remaining cost to advance the technology for each method to a level where the system validation models have been demonstrated in a simulated environment.

Research on signal demodulation technology of Mach-Zehnder optical fiber sensor vibration system

NASA Astrophysics Data System (ADS)

Liu, Juncheng; Cheng, Pengshen; Hu, Tong

2017-08-01

Mach-Zehnder (M-Z) interferometer is frequently used in optical fiber vibration system. And signal demodulation technology plays an important role in the signal processing of M-Z optical fiber vibration system. In order to accurately get the phase information of the vibration signals, the signal demodulation technique based on M-Z interference principle is studied. In this paper, by analyzing the principles of 3 × 3 fiber coupler homodyne demodulation method and phase-generating carrier (PGC) technology, the advantages and disadvantages of the two demodulation methods for different vibration signal are presented. Then the method of judging signal strength is proposed. The correlation between the demodulation effects and strength of the perturbation signals is analyzed. Finally, the simulation experiments are carried out to compare the demodulation effects of the two demodulation methods, the results demonstrate that PGC demodulation technology has great advantages in weak signals, and the 3 × 3 fiber coupler is more suitable for strong signals.

Barriers in adopting blended learning in a private university of Pakistan and East Africa: faculty members’ perspective

PubMed Central

Gulzar, Saleema; Nicholas, Wachira; Nkoroi, Beatrice

2017-01-01

Background Education methods have undergone transformation over the centuries. Use of technology is the cornerstone for innovation in teaching methods. Hence, blended learning which includes face to face and online modalities is being increasingly explored as effective method for learning. This pilot study determines the perceptions of faculty members in a private international university on barriers influencing adoption of technology for teaching and learning. Methods A cross-sectional survey was conducted through a self-reported questionnaire using ‘survey monkey’. The data was entered and analyzed using Statistical Package for the Social Sciences (SPSS version 20). Frequencies and proportions are reported. Results Findings indicated that 51.6% faculty members perceived the importance of integration of technology in their teaching. Around 54% of the participants recognized that they do possess the ability and accessibility to integrate information communication technology (ICT) in teaching and learning, but there is a need to hone the basic information technology (IT) skills to initiate technology driven teaching. Findings revealed that 55% faculty members acknowledged the constraint of not getting protective time to develop and deliver technology driven courses. Further, results showed that 45% faculty members perceived that their innovation efforts in terms of teaching as blended learning do not count towards their professional promotion or recognition, as usually priority is given to research over teaching innovation. The findings also indicated that 54.5% participants asserted that university lack mentorship in the field of blended learning. Conclusions Therefore, study suggests that universities should provide adequate mentorship programmes for the faculty members in enhancing their skills of integrating technology in their teaching. PMID:28567414

Influence of pay-for-performance programs on information technology use among child health providers: the devil is in the details.

PubMed

Menachemi, Nir; Struchen-Shellhorn, Wendy; Brooks, Robert G; Simpson, Lisa

2009-01-01

Pay-for-performance programs are used to promote improved health care quality, often through increased use of health information technology. However, little is known about whether pay-for-performance programs influence the adoption of health information technology, especially among child health providers. This study explored how various pay-for-performance compensation methods are related to health information technology use. Survey data from 1014 child health providers practicing in Florida were analyzed by using univariate and multivariate techniques. Questions asked about the adoption of electronic health records and personal digital assistants, as well as types of activities that affected child health provider compensation or income. The most common reported method to affect respondents' compensation was traditional productivity or billing (78%). Of the pay-for-performance-related methods of compensation, child health providers indicated that measures of clinical care (41%), patient surveys and experience (34%), the use of health information technology (29%), and quality bonuses or incentives (27%) were a major or minor factor in their compensation. In multivariate logistic regression analyses, only pay-for-performance programs that compensated directly for health information technology use were associated with an increased likelihood of electronic health record system adoption. Pay-for-performance programs linking measures of clinical quality to compensation were positively associated with personal digital assistant use among child health providers. Pay-for-performance programs that do not directly emphasize health information technology use do not influence the adoption of electronic health records among Florida physicians treating children. Understanding how different pay-for-performance compensation methods incentivize health information technology adoption is important for improving quality.

Technology Acceptance and Course Completion Rates in Online Education: A Non-experimental, Mixed Method Study

NASA Astrophysics Data System (ADS)

Allison, Colelia

As the need for quality online courses increase in demand, the acceptance of technology and completion rates become the focus of higher education. The purpose of this non-experimental, mixed method study was to examine the relationship between the university students' perceptions and acceptance of technology and learner completion rates with respect to the development of online courses. This study involved 61 participants from two universities regarding their perceived usefulness (PU) of technology, intent to use technology, and intent to complete a course. Two research questions were examined regarding student perceptions regarding technology employed in an online course and the relationship, if any, between technology acceptance and completion of an online university course. The technology acceptance model (TAM) was used to collect data on the usefulness of course activities and student intent to complete the course. An open-ended questionnaire was administered to collect information concerning student perceptions of course activities. Quantitative data was analyzed using SPSS and Qualtrics, which indicated there was not a significant relationship between technology acceptance and course completion (p = .154). Qualitative data were examined by pattern matching to create a concept map of the theoretical patterns between constructs. Pattern matching revealed many students favored the use of the Internet over Canvas. Furthermore, data showed students enrolled in online courses because of the flexibility and found the multimedia used in the courses as helpful in course completion. Insight was investigated to offer reasons and decisions concerning choice that were made by the students. Future recommendations are to expand mixed methods studies of technology acceptance in various disciplines to gain a better understanding of student perceptions of technology uses, intent to use, and course completion.

Modern Methods of Rail Welding

NASA Astrophysics Data System (ADS)

Kozyrev, Nikolay A.; Kozyreva, Olga A.; Usoltsev, Aleksander A.; Kryukov, Roman E.; Shevchenko, Roman A.

2017-10-01

Existing methods of rail welding, which are enable to get continuous welded rail track, are observed in this article. Analysis of existing welding methods allows considering an issue of continuous rail track in detail. Metallurgical and welding technologies of rail welding and also process technologies reducing aftereffects of temperature exposure are important factors determining the quality and reliability of the continuous rail track. Analysis of the existing methods of rail welding enable to find the research line for solving this problem.

The Impact of the Role of an Instructional Technology Facilitator on Teacher Efficacy in Classroom Technology Integration in Two Rural Public Schools in Northwestern North Carolina

ERIC Educational Resources Information Center

Adams, Karri Campbell

2015-01-01

The purpose of this study was to contribute to a limited body of research on the impact of the role of the school-level instructional technology facilitator on teacher technology efficacy. This mixed-methods study involved the administration of a survey instrument designed to measure teacher technology efficacy, the Computer Technology Integration…

Skylab medical technology utilization

NASA Technical Reports Server (NTRS)

Stonesifer, J. C.

1974-01-01

To perform the extensive medical experimentation on man in a long-term, zero-g environment, new medical measuring and monitoring equipment had to be developed, new techniques in training and operations were required, and new methods of collecting and analyzing the great amounts of medical data were developed. Examples of technology transfers to the public sector resulted from the development of new equipment, methods, techniques, and data. This paper describes several of the examples that stemmed directly from Skylab technology.

Integrating medical, assistive, and universal design products and technologies: Assistive Technology Service Method (ATSM).

PubMed

Elsaesser, Linda-Jeanne; Bauer, Stephen

2012-07-01

ISO26000 provides guidance on effective organizational performance that recognizes social responsibility (including rights of persons with disabilities (PWD)), engages stakeholders, and contributes to sustainable development [1]. Millennium Development Goals 2010 state: while progress has been made, insufficient dedication to sustainable development, and inequalities to the most vulnerable people require attention [2]. World Report on Disability 2011 recommendations includes improved data collection and removal of barriers to rehabilitation that empower PWD [3]. The Assistive Technology Service Method (ATSM), Assistive Technology Device Classification (ATDC) and Matching Person and Technology (MPT) provide an evidence-based, standardized, internationally comparable framework to improve rehabilitation interventions [4-6]. The ATSM and ATDC support universal design (UD) principles and provision of universal technology. The MPT assures interventions are effective and satisfactory to end-users [7]. The ICF conceptual framework and common language are used throughout [8]. Research findings on healthcare needs are translated. ATSM applications in support of these findings are presented. National initiatives demonstrate the need and value of the ATSM as an evidence-based, user-centric, interdisciplinary method to improve individual and organizational performance for rehabilitation [including AT] services. Two Disability & Rehabilitation: Assistive Technology articles demonstrate ATSM and ATDC use to strengthen rehabilitation services and integrate Universal Design principles for socially responsible behavior.

Bridging Technometric Method and Innovation Process: An Initial Study

NASA Astrophysics Data System (ADS)

Rumanti, A. A.; Reynaldo, R.; Samadhi, T. M. A. A.; Wiratmadja, I. I.; Dwita, A. C.

2018-03-01

The process of innovation is one of ways utilized to increase the capability of a technology component that reflects the need of SME. Technometric method can be used to identify to what extent the level of technology advancement in a SME is, and also which technology component that needs to be maximized in order to significantly deliver an innovation. This paper serves as an early study, which lays out a conceptual framework that identifies and elaborates the principles of innovation process from a well-established innovation model by Martin with the technometric method, based on the initial background research conducted at SME Ira Silver in Jogjakarta, Indonesia.

A Method for Making Cross-Comparable Estimates of the Benefits of Decision Support Technologies for Air Traffic Management

NASA Technical Reports Server (NTRS)

Lee, David; Long, Dou; Etheridge, Mel; Plugge, Joana; Johnson, Jesse; Kostiuk, Peter

1998-01-01

We present a general method for making cross comparable estimates of the benefits of NASA-developed decision support technologies for air traffic management, and we apply a specific implementation of the method to estimate benefits of three decision support tools (DSTs) under development in NASA's advanced Air Transportation Technologies Program: Active Final Approach Spacing Tool (A-FAST), Expedite Departure Path (EDP), and Conflict Probe and Trial Planning Tool (CPTP). The report also reviews data about the present operation of the national airspace system (NAS) to identify opportunities for DST's to reduce delays and inefficiencies.

Effect of Web Assisted Education Supported by Six Thinking Hats on Students' Academic Achievement in Science and Technology Classes

ERIC Educational Resources Information Center

Ercan, Orhan; Bilen, Kadir

2014-01-01

Advances in computer technologies and adoption of related methods and techniques in education have developed parallel to each other. This study focuses on the need to utilize more than one teaching method and technique in education rather than focusing on a single teaching method. By using the pre-test post-test and control group semi-experimental…

Learning Specific Content in Technology Education: Learning Study as a Collaborative Method in Swedish Preschool Class Using Hands-On Material

ERIC Educational Resources Information Center

Kilbrink, Nina; Bjurulf, Veronica; Blomberg, Ingela; Heidkamp, Anja; Hollsten, Ann-Christin

2014-01-01

This article describes the process of a learning study conducted in technology education in a Swedish preschool class. The learning study method used in this study is a collaborative method, where researchers and teachers work together as a team concerning teaching and learning about a specific learning object. The object of learning in this study…

Knowledge Consolidation Analysis: Toward a Methodology for Studying the Role of Argument in Technology Development

ERIC Educational Resources Information Center

Dyehouse, Jeremiah

2007-01-01

Researchers studying technology development often examine how rhetorical activity contributes to technologies' design, implementation, and stabilization. This article offers a possible methodology for studying one role of rhetorical activity in technology development: knowledge consolidation analysis. Applying this method to an exemplar case, the…

Effetive methods in educating extension agents and farmers on conservation farming technology

USDA-ARS?s Scientific Manuscript database

Adoption of new technologies requires transfer of information from developers to end users. Efficiency of the transfer process influences the rate of adoption and ultimate impact of the technology. Various channels are used to transfer technology from researchers to farmers. Two commonly used ones ...

Enhancing Poetry Writing through Technology: The Yin and the Yang.

ERIC Educational Resources Information Center

Roberts, Sherron Killingsworth; Schmidt, Denise

2002-01-01

Describes the outcome of an innovative mentoring program that paired technology faculty and methods faculty in order to form partnerships to facilitate the modeling of technology for preservice teachers. Discusses the creation of useful applications for enhancing poetry writing through technology for elementary school students. (SG)

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

Steps toward a Technology for the Diffusion of Innovations.

ERIC Educational Resources Information Center

Stolz, Stephanie B.

Research-based technologies for solving problems currently exist but are not being widely implemented. Although user variables, program effectiveness, and political considerations have been documented as correlates of implementation, general non-implementation of the technology still exists, due to a lack of methods. A technology of dissemination…

EPA-developed, patented technologies related to waste that are available for licensing

EPA Pesticide Factsheets

Under the Federal Technology Transfer Act (FTTA), Federal Agencies can patent inventions developed during the course of research. These technologies can then be licensed to businesses or individuals for further development and sale in the marketplace. These technologies relate to methods of managing and remediating waste.

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

ERIC Educational Resources Information Center

Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

2017-01-01

This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

Directed International Technological Change and Climate Policy: New Methods for Identifying Robust Policies Under Conditions of Deep Uncertainty

NASA Astrophysics Data System (ADS)

Molina-Perez, Edmundo

It is widely recognized that international environmental technological change is key to reduce the rapidly rising greenhouse gas emissions of emerging nations. In 2010, the United Nations Framework Convention on Climate Change (UNFCCC) Conference of the Parties (COP) agreed to the creation of the Green Climate Fund (GCF). This new multilateral organization has been created with the collective contributions of COP members, and has been tasked with directing over USD 100 billion per year towards investments that can enhance the development and diffusion of clean energy technologies in both advanced and emerging nations (Helm and Pichler, 2015). The landmark agreement arrived at the COP 21 has reaffirmed the key role that the GCF plays in enabling climate mitigation as it is now necessary to align large scale climate financing efforts with the long-term goals agreed at Paris 2015. This study argues that because of the incomplete understanding of the mechanics of international technological change, the multiplicity of policy options and ultimately the presence of climate and technological change deep uncertainty, climate financing institutions such as the GCF, require new analytical methods for designing long-term robust investment plans. Motivated by these challenges, this dissertation shows that the application of new analytical methods, such as Robust Decision Making (RDM) and Exploratory Modeling (Lempert, Popper and Bankes, 2003) to the study of international technological change and climate policy provides useful insights that can be used for designing a robust architecture of international technological cooperation for climate change mitigation. For this study I developed an exploratory dynamic integrated assessment model (EDIAM) which is used as the scenario generator in a large computational experiment. The scope of the experimental design considers an ample set of climate and technological scenarios. These scenarios combine five sources of uncertainty: climate change, elasticity of substitution between renewable and fossil energy and three different sources of technological uncertainty (i.e. R&D returns, innovation propensity and technological transferability). The performance of eight different GCF and non-GCF based policy regimes is evaluated in light of various end-of-century climate policy targets. Then I combine traditional scenario discovery data mining methods (Bryant and Lempert, 2010) with high dimensional stacking methods (Suzuki, Stem and Manzocchi, 2015; Taylor et al., 2006; LeBlanc, Ward and Wittels, 1990) to quantitatively characterize the conditions under which it is possible to stabilize greenhouse gas emissions and keep temperature rise below 2°C before the end of the century. Finally, I describe a method by which it is possible to combine the results of scenario discovery with high-dimensional stacking to construct a dynamic architecture of low cost technological cooperation. This dynamic architecture consists of adaptive pathways (Kwakkel, Haasnoot and Walker, 2014; Haasnoot et al., 2013) which begin with carbon taxation across both regions as a critical near term action. Then in subsequent phases different forms of cooperation are triggered depending on the unfolding climate and technological conditions. I show that there is no single policy regime that dominates over the entire uncertainty space. Instead I find that it is possible to combine these different architectures into a dynamic framework for technological cooperation across regions that can be adapted to unfolding climate and technological conditions which can lead to a greater rate of success and to lower costs in meeting the end-of-century climate change objectives agreed at the 2015 Paris Conference of the Parties. Keywords: international technological change, emerging nations, climate change, technological uncertainties, Green Climate Fund.

Review and status of liquid-cooling technology for gas turbines

NASA Technical Reports Server (NTRS)

Vanfossen, G. J., Jr.; Stepka, F. S.

1979-01-01

A review was conducted of liquid-cooled turbine technology. Selected liquid-cooled systems and methods are presented along with an assessment of the current technology status and requirements. A comprehensive bibliography is presented.

A Mixed Methods Comparison of Teacher Education Faculty Perceptions of the Integration of Technology into Their Courses and Student Feedback on Technology Proficiency

ERIC Educational Resources Information Center

Teclehaimanot, Berhane; Mentzer, Gale; Hickman, Torey

2011-01-01

Results from previous studies on pre-service teacher technology integration and faculty perceptions of technology integration within the teacher education program at a medium-sized, Midwestern university are compared to account for the self-reported lack of confidence pre-service teachers have integrating technology into their teaching. Also…

Emerging Technologies for Environmental Remediation: Integrating Data and Judgment.

PubMed

Bates, Matthew E; Grieger, Khara D; Trump, Benjamin D; Keisler, Jeffrey M; Plourde, Kenton J; Linkov, Igor

2016-01-05

Emerging technologies present significant challenges to researchers, decision-makers, industry professionals, and other stakeholder groups due to the lack of quantitative risk, benefit, and cost data associated with their use. Multi-criteria decision analysis (MCDA) can support early decisions for emerging technologies when data is too sparse or uncertain for traditional risk assessment. It does this by integrating expert judgment with available quantitative and qualitative inputs across multiple criteria to provide relative technology scores. Here, an MCDA framework provides preliminary insights on the suitability of emerging technologies for environmental remediation by comparing nanotechnology and synthetic biology to conventional remediation methods. Subject matter experts provided judgments regarding the importance of criteria used in the evaluations and scored the technologies with respect to those criteria. The results indicate that synthetic biology may be preferred over nanotechnology and conventional methods for high expected benefits and low deployment costs but that conventional technology may be preferred over emerging technologies for reduced risks and development costs. In the absence of field data regarding the risks, benefits, and costs of emerging technologies, structuring evidence-based expert judgment through a weighted hierarchy of topical questions may be helpful to inform preliminary risk governance and guide emerging technology development and policy.

TECHNOLOGY VERIFICATION OF COMMERCIALLY AVAILABLE METHODS FOR DECONTAMINATION OF INDOOR SURFACES CONTAMINATED WITH BIOLOGICAL OR CHEMICAL AGENTS

EPA Science Inventory

To support the Nation's Homeland Security Program, this U.S. Environmental Protection Agency (EPA) Environmental Technology Verification (ETV) project is conducted to verify the performance of commercially available products, methods, and equipment for decontamination of hard and...

Prospects for a Novel Ultrashort Pulsed Laser Technology for Pathogen Inactivation

DTIC Science & Technology

2012-07-06

and Listeria [3-11]. The USP laser technology has the following advantages over the current methods of disinfection of pathogens: (1) With... Listeria monocytogenes Gram positive 10 3 Enterobacter Sakazakii Gram negative 10 3 (2) Existing disinfection methods such as irradiation of ultraviolet

On the measurement of stationary electric fields in air

NASA Technical Reports Server (NTRS)

Kirkham, H.

2002-01-01

Applications and measurement methods for field measurements are reviewed. Recent developments using optical technology are examined. The various methods are compared. It is concluded that the best general purpose instrument is the isolated cylindrical field mill, but MEMS technology could furnish better instruments in the future.

Current Technical Approaches for the Early Detection of Foodborne Pathogens: Challenges and Opportunities.

PubMed

Cho, Il-Hoon; Ku, Seockmo

2017-09-30

The development of novel and high-tech solutions for rapid, accurate, and non-laborious microbial detection methods is imperative to improve the global food supply. Such solutions have begun to address the need for microbial detection that is faster and more sensitive than existing methodologies (e.g., classic culture enrichment methods). Multiple reviews report the technical functions and structures of conventional microbial detection tools. These tools, used to detect pathogens in food and food homogenates, were designed via qualitative analysis methods. The inherent disadvantage of these analytical methods is the necessity for specimen preparation, which is a time-consuming process. While some literature describes the challenges and opportunities to overcome the technical issues related to food industry legal guidelines, there is a lack of reviews of the current trials to overcome technological limitations related to sample preparation and microbial detection via nano and micro technologies. In this review, we primarily explore current analytical technologies, including metallic and magnetic nanomaterials, optics, electrochemistry, and spectroscopy. These techniques rely on the early detection of pathogens via enhanced analytical sensitivity and specificity. In order to introduce the potential combination and comparative analysis of various advanced methods, we also reference a novel sample preparation protocol that uses microbial concentration and recovery technologies. This technology has the potential to expedite the pre-enrichment step that precedes the detection process.

Future Research in Health Information Technology: A Review.

PubMed

Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammad Reza; Saghafi, Fatemeh

2017-01-01

Currently, information technology is considered an important tool to improve healthcare services. To adopt the right technologies, policy makers should have adequate information about present and future advances. This study aimed to review and compare studies with a focus on the future of health information technology. This review study was completed in 2015. The databases used were Scopus, Web of Science, ProQuest, Ovid Medline, and PubMed. Keyword searches were used to identify papers and materials published between 2000 and 2015. Initially, 407 papers were obtained, and they were reduced to 11 papers at the final stage. The selected papers were described and compared in terms of the country of origin, objective, methodology, and time horizon. The papers were divided into two groups: those forecasting the future of health information technology (seven papers) and those providing health information technology foresight (four papers). The results showed that papers related to forecasting the future of health information technology were mostly a literature review, and the time horizon was up to 10 years in most of these studies. In the health information technology foresight group, most of the studies used a combination of techniques, such as scenario building and Delphi methods, and had long-term objectives. To make the most of an investment and to improve planning and successful implementation of health information technology, a strategic plan for the future needs to be set. To achieve this aim, methods such as forecasting the future of health information technology and offering health information technology foresight can be applied. The forecasting method is used when the objectives are not very large, and the foresight approach is recommended when large-scale objectives are set to be achieved. In the field of health information technology, the results of foresight studies can help to establish realistic long-term expectations of the future of health information technology.

Detecting submerged objects: the application of side scan sonar to forensic contexts.

PubMed

Schultz, John J; Healy, Carrie A; Parker, Kenneth; Lowers, Bim

2013-09-10

Forensic personnel must deal with numerous challenges when searching for submerged objects. While traditional water search methods have generally involved using dive teams, remotely operated vehicles (ROVs), and water scent dogs for cases involving submerged objects and bodies, law enforcement is increasingly integrating multiple methods that include geophysical technologies. There are numerous advantages for integrating geophysical technologies, such as side scan sonar and ground penetrating radar (GPR), with more traditional search methods. Overall, these methods decrease the time involved searching, in addition to increasing area searched. However, as with other search methods, there are advantages and disadvantages when using each method. For example, in instances with excessive aquatic vegetation or irregular bottom terrain, it may not be possible to discern a submersed body with side scan sonar. As a result, forensic personnel will have the highest rate of success during searches for submerged objects when integrating multiple search methods, including deploying multiple geophysical technologies. The goal of this paper is to discuss the methodology of various search methods that are employed for submerged objects and how these various methods can be integrated as part of a comprehensive protocol for water searches depending upon the type of underwater terrain. In addition, two successful case studies involving the search and recovery of a submerged human body using side scan sonar are presented to illustrate the successful application of integrating a geophysical technology with divers when searching for a submerged object. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Real-time use of the iPad by third-year medical students for clinical decision support and learning: a mixed methods study.

PubMed

Nuss, Michelle A; Hill, Janette R; Cervero, Ronald M; Gaines, Julie K; Middendorf, Bruce F

2014-01-01

Despite widespread use of mobile technology in medical education, medical students' use of mobile technology for clinical decision support and learning is not well understood. Three key questions were explored in this extensive mixed methods study: 1) how medical students used mobile technology in the care of patients, 2) the mobile applications (apps) used and 3) how expertise and time spent changed overtime. This year-long (July 2012-June 2013) mixed methods study explored the use of the iPad, using four data collection instruments: 1) beginning and end-of-year questionnaires, 2) iPad usage logs, 3) weekly rounding observations, and 4) weekly medical student interviews. Descriptive statistics were generated for the questionnaires and apps reported in the usage logs. The iPad usage logs, observation logs, and weekly interviews were analyzed via inductive thematic analysis. Students predominantly used mobile technology to obtain real-time patient data via the electronic health record (EHR), to access medical knowledge resources for learning, and to inform patient care. The top four apps used were Epocrates(®), PDF Expert(®), VisualDx(®), and Micromedex(®). The majority of students indicated that their use (71%) and expertise (75%) using mobile technology grew overtime. This mixed methods study provides substantial evidence that medical students used mobile technology for clinical decision support and learning. Integrating its use into the medical student's daily workflow was essential for achieving these outcomes. Developing expertise in using mobile technology and various apps was critical for effective and efficient support of real-time clinical decisions.

Radio Frequency Identification Queuing & Geo-Location (RAQGEO): A spatial solution to inventory management at XYZ Logistics, Inc

NASA Astrophysics Data System (ADS)

Griffiths, Bradley Joseph

New supply chain management methods using radio frequency identification (RFID) and global positioning system (GPS) technology are quickly being adopted by companies as various inventory management benefits are being realized. For example, companies such as Nippon Yusen Kaisha (NYK) Logistics use the technology coupled with geospatial support systems for distributors to quickly find and manage freight containers. Traditional supply chain management methods require pen-to-paper reporting, searching inventory on foot, and human data entry. Some companies that prioritize supply chain management have not adopted the new technology, because they may feel that their traditional methods save the company expenses. This thesis serves as a pilot study that examines how information technology (IT) utilizing RFID and GPS technology can serve to increase workplace productivity, decrease human labor associated with inventorying, plus be used for spatial analysis by management. This pilot study represents the first attempt to couple RFID technology with Geographic Information Systems (GIS) in supply chain management efforts to analyze and locate mobile assets by exploring costs and benefits of implementation plus how the technology can be employed. This pilot study identified a candidate to implement a new inventory management method as XYZ Logistics, Inc. XYZ Logistics, Inc. is a fictitious company but represents a factual corporation. The name has been changed to provide the company with anonymity and to not disclose confidential business information. XYZ Logistics, Inc., is a nation-wide company that specializes in providing space solutions for customers including portable offices, storage containers, and customizable buildings.

Blasting preparation for selective mining of complex structured ore deposition

NASA Astrophysics Data System (ADS)

Marinin, M. A.; Dolzhikov, V. V.

2017-10-01

Technological features of ore mining in the open pit development for processing of complex structured ore deposit of steeply falling occurrence have been considered. The technological schemes of ore bodies mining under different conditions of occurrence, consistency and capacity have been considered and offered in the paper. These technologies permit to reduce losses and dilution, but to increase the completeness and quality of mined ore. A method of subsequent selective excavation of ore bodies has been proposed. The method is based on the complex use of buffer-blasting technology for the muck mass and the principle of trim blasting at ore-rock junctions.

Review of near-infrared methods for wound assessment

NASA Astrophysics Data System (ADS)

Sowa, Michael G.; Kuo, Wen-Chuan; Ko, Alex C.-T.; Armstrong, David G.

2016-09-01

Wound management is a challenging and costly problem that is growing in importance as people are living longer. Instrumental methods are increasingly being relied upon to provide objective measures of wound assessment to help guide management. Technologies that employ near-infrared (NIR) light form a prominent contingent among the existing and emerging technologies. We review some of these technologies. Some are already established, such as indocyanine green fluorescence angiography, while we also speculate on others that have the potential to be clinically relevant to wound monitoring and assessment. These various NIR-based technologies address clinical wound management needs along the entire healing trajectory of a wound.

The possibility of low-budget GNSS equipment using for cadastral work for the Unified State Real Estate Cadastre purposes and transport link

NASA Astrophysics Data System (ADS)

Kosarev, Nikolai; Terentyev, Dmitry; Solnyshkova, Olga; Makarikhina, Inna

2017-10-01

The article considers geodetic methods for determining land plots location during cadastral work. The analysis of technological solutions in coordinates determining of the land plots’ characteristic points and their areas was carried out. The accuracy of geodetic methods in the cadastral work implementation was assessed. The priority technology was identified, including the use of low-budget GNSS equipment for this very task. The areas values were obtained and root-mean-squares of boundary marks position calculated by means of chosen technology are presented. The estimation and justification of the selected technology for cadastral work is given.

Research on liquid impact forming technology of double-layered tubes

NASA Astrophysics Data System (ADS)

Sun, Changying; Liu, Jianwei; Yao, Xinqi; Huang, Beixing; Li, Yuhan

2018-03-01

A double-layered tube is widely used and developed in various fields because of its perfect comprehensive performance and design. With the advent of the era of a double-layered tube, the requirements for double layered tube forming quality, manufacturing cost and forming efficiency are getting higher, so forming methods of a double-layered tube are emerged in an endless stream, the forming methods of a double-layered tube have a great potential in the future. The liquid impact forming technology is a combination of stamping technology and hydroforming technology. Forming a double-layered tube has huge advantages in production cost, quality and efficiency.

Key composition optimization of meat processed protein source by vacuum freeze-drying technology.

PubMed

Ma, Yan; Wu, Xingzhuang; Zhang, Qi; Giovanni, Vigna; Meng, Xianjun

2018-05-01

Vacuum freeze-drying technology is a high technology content, a wide range of knowledge of technology in the field of drying technology is involved, it is also a method of the most complex drying equipment, the largest energy consumption, the highest cost of drying method, but due to the particularity of its dry goods: the freeze-drying food has the advantages of complex water performance is good, cooler and luster of freezing and drying food to maintain good products, less nutrient loss, light weight, easy to carry transportation, easy to long-term preservation, and on the quality is far superior to the obvious advantages of other dried food, making it become the forefront of drying technology research and development. The freeze-drying process of Chinese style ham and western Germany fruit tree tenderloin is studied in this paper, their eutectic point, melting point and collapse temperature, freeze-drying curve and its heat and mass transfer characteristics are got, then the precool temperature and the highest limiting temperature of sublimation interface are determined. The effect of system pressure on freeze-dried rate in freeze-drying process is discussed, and the method of regulating pressure circularly is determined.

Current progress of targetron technology: development, improvement and application in metabolic engineering.

PubMed

Liu, Ya-Jun; Zhang, Jie; Cui, Gu-Zhen; Cui, Qiu

2015-06-01

Targetrons are mobile group II introns that can recognize their DNA target sites by base-pairing RNA-DNA interactions with the aid of site-specific binding reverse transcriptases. Targetron technology stands out from recently developed gene targeting methods because of the flexibility, feasibility, and efficiency, and is particularly suitable for the genetic engineering of difficult microorganisms, including cellulolytic bacteria that are considered promising candidates for biomass conversion via consolidated bioprocessing. Along with the development of the thermotargetron method for thermophiles, targetron technology becomes increasingly important for the metabolic engineering of industrial microorganisms aiming at biofuel/chemical production. To summarize the current progress of targetron technology and provide new insights on the use of the technology, this paper reviews the retrohoming mechanisms of both mesophilic and thermophilic targetron methods based on various group II introns, investigates the improvement of targetron tools for high target efficiency and specificity, and discusses the current applications in the metabolic engineering for bacterial producers. Although there are still intellectual property and technical restrictions in targetron applications, we propose that targetron technology will contribute to both biochemistry research and the metabolic engineering for industrial productions. Copyright © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Teacher Learning of Technology Enhanced Formative Assessment

NASA Astrophysics Data System (ADS)

Feldman, Allan; Capobianco, Brenda M.

2008-02-01

This study examined the integration of technology enhanced formative assessment (FA) into teachers' practice. Participants were high school physics teachers interested in improving their use of a classroom response system (CRS) to promote FA. Data were collected using interviews, direct classroom observations, and collaborative discussions. The physics teachers engaged in collaborative action research (AR) to learn how to use FA and CRS to promote student and teacher learning. Data were analyzed using open coding, cross-case analysis, and content analysis. Results from data analysis allowed researchers to construct a model for knowledge skills necessary for the integration of technology enhanced FA into teachers' practice. The model is as a set of four technologies: hardware and software; methods for constructing FA items; pedagogical methods; and curriculum integration. The model is grounded in the idea that teachers must develop these respective technologies as they interact with the CRS (i.e., hardware and software, item construction) and their existing practice (i.e., pedagogical methods, curriculum). Implications are that for teachers to make FA an integral part of their practice using CRS, they must: 1) engage in the four technologies; 2) understand the nature of FA; and 3) collaborate with other interested teachers through AR.

Structures Technology for Future Aerospace Systems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K.; Venneri, Samuel L.; Paul, Donald B.; Hopkins, Mark A.

2000-01-01

An overview of structures technology for future aerospace systems is given. Discussion focuses on developments in component technologies that will improve the vehicle performance, advance the technology exploitation process, and reduce system life-cycle costs. The component technologies described are smart materials and structures, multifunctional materials and structures, affordable composite structures, extreme environment structures, flexible load bearing structures, and computational methods and simulation-based design. The trends in each of the component technologies are discussed and the applicability of these technologies to future aerospace vehicles is described.

The estimation of dynamic contact angle of ultra-hydrophobic surfaces using inclined surface and impinging droplet methods

NASA Astrophysics Data System (ADS)

Jasikova, Darina; Kotek, Michal

2014-03-01

The development of industrial technology also brings with optimized surface quality, particularly where there is contact with food. Application ultra-hydrophobic surface significantly reduces the growth of bacteria and facilitates cleaning processes. Testing and evaluation of surface quality are used two methods: impinging droplet and inclined surface method optimized with high speed shadowgraphy, which give information about dynamic contact angle. This article presents the results of research into new methods of measuring ultra-hydrophobic patented technology.

A light intensity monitoring method based on fiber Bragg grating sensing technology and BP neural network

NASA Astrophysics Data System (ADS)

Li, Lu-Ming; Zhu, Qian; Zhang, Zhi-Guo; Cai, Zhi-Min; Liao, Zhi-Jun; Hu, Zhen-Yan

2017-04-01

In this paper, a light intensity monitoring method based on FBG is proposed. The method establishes a light intensity monitoring model with cantilever beam structure and BP neural network algorithm, which is based on fiber grating sensing technology. The accuracy of the model can meet the requirements of engineering project and it can monitor light intensity in real time. The experimental results show that the method has good stability and high sensitivity.

Technology Assessment Report: Aqueous Sludge Gasification Technologies

EPA Science Inventory

The study reveals that sludge gasification is a potentially suitable alternative to conventional sludge handling and disposal methods. However, very few commercial operations are in existence. The limited pilot, demonstration or commercial application of gasification technology t...

ARSENIC REMOVAL

EPA Science Inventory

Presentation covered five topics; arsenic chemistry, best available technology (BAT), surface water technology, ground water technology and case studies of arsenic removal. The discussion on arsenic chemistry focused on the need and method of speciation for AsIII and AsV. BAT me...

45 CFR 170.457 - Authorized testing and certification methods.

Code of Federal Regulations, 2010 CFR

2010-10-01

....457 Section 170.457 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.557 - Authorized certification methods.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 170.557 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.557 Authorized certification...

45 CFR 170.557 - Authorized certification methods.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 170.557 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent Certification Program for HIT § 170.557 Authorized...

45 CFR 170.557 - Authorized certification methods.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 170.557 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT Certification Program § 170.557 Authorized certification...

45 CFR 170.457 - Authorized testing and certification methods.

Code of Federal Regulations, 2013 CFR

2013-10-01

....457 Section 170.457 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.457 - Authorized testing and certification methods.

Code of Federal Regulations, 2012 CFR

2012-10-01

....457 Section 170.457 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.457 - Authorized testing and certification methods.

Code of Federal Regulations, 2011 CFR

2011-10-01

....457 Section 170.457 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

45 CFR 170.457 - Authorized testing and certification methods.

Code of Federal Regulations, 2014 CFR

2014-10-01

....457 Section 170.457 Public Welfare Department of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary Certification Program for HIT...

SHARING RESOURCES THROUGH COLLABORATION USING TECHNOLOGY

EPA Science Inventory

In response to changing social and economic conditions, instant communication, emerging technology, and decreasing resources for libraries, there is a need for librarians to use collaborative methods, strategies, and technologies to solve common problems or produce common produ...

Mathematics. [SITE 2001 Section].

ERIC Educational Resources Information Center

Connell, Michael L., Ed.; Lowery, Norene Vail, Ed.; Harnisch, Delwyn L., Ed.

This document contains the following papers on mathematics from the SITE (Society for Information Technology & Teacher Education) 2001 conference: "Secondary Mathematics Methods Course with Technology Units: Encouraging Pre-Service Teachers To Use Technology" (Rajee Amarasinghe); "Competency Exams in College Mathematics"…

What Advances Are Being Made in DNA Sequencing?

MedlinePlus

... to identify genetic variations; both methods rely on new technologies that allow rapid sequencing of large amounts of ... describes the different sequencing technologies and what the new technologies have meant for the study of the genetic ...

GUIDE TO CLEANER TECHNOLOGIES: ORGANIC COATING REMOVAL

EPA Science Inventory

A cleaner technology is a source reduction or recycle method |applied to eliminate or significantly reduce hazardous waste generation. Source reduction includes product changes and source control. Source control can be further characterized as input material changes, technology...

Top 10 "Smart" Technologies for Schools.

ERIC Educational Resources Information Center

Fodeman, Doug; Holzberg, Carol S.; Kennedy, Kristen; McIntire, Todd; McLester, Susan; Ohler, Jason; Parham, Charles; Poftak, Amy; Schrock, Kathy; Warlick, David

2002-01-01

Describes 10 smart technologies for education, including voice to text software; mobile computing; hybrid computing; virtual reality; artificial intelligence; telementoring; assessment methods; digital video production; fingerprint recognition; and brain functions. Lists pertinent Web sites for each technology. (LRW)

An overview of in-orbit radiometric calibration of typical satellite sensors

NASA Astrophysics Data System (ADS)

Zhou, G. Q.; Li, C. Y.; Yue, T.; Jiang, L. J.; Liu, N.; Sun, Y.; Li, M. Y.

2015-06-01

This paper reviews the development of in-orbit radiometric calibration methods in the past 40 years. It summarizes the development of in-orbit radiometric calibration technology of typical satellite sensors in the visible/near-infrared bands and the thermal infrared band. Focuses on the visible/near-infrared bands radiometric calibration method including: Lamp calibration and solar radiationbased calibration. Summarizes the calibration technology of Landsat series satellite sensors including MSS, TM, ETM+, OLI, TIRS; SPOT series satellite sensors including HRV, HRS. In addition to the above sensors, there are also summarizing ALI which was equipped on EO-1, IRMSS which was equipped on CBERS series satellite. Comparing the in-orbit radiometric calibration technology of different periods but the same type satellite sensors analyzes the similarities and differences of calibration technology. Meanwhile summarizes the in-orbit radiometric calibration technology in the same periods but different country satellite sensors advantages and disadvantages of calibration technology.

Lessons learned using Web conference technology for online focus group interviews.

PubMed

Tuttas, Carol A

2015-01-01

Researchers use Internet technology for data collection in qualitative studies. In the literature there are published accounts of synchronous (real-time) and more commonly, asynchronous (not-real-time) focus group data collection methods supported by Internet technology in the form of email correspondence, LISTSERVs, discussion boards, and chat rooms. Real-time audiovisual Web conference technology offers qualitative researchers a promising alternative means to carry out focus groups. In this methodological article I describe how I used Web conference technology to host online focus groups for a qualitative study about job integration experiences of travel nurses geographically dispersed across the United States. I describe lessons learned from the use of this innovative method for qualitative data collection, including a brief overview about the use of dictation software for transcription. This new knowledge is useful to researchers considering Web conference technology to carry out focus group data collection in qualitative research. © The Author(s) 2014.

Nanocrystals Technology for Pharmaceutical Science.

PubMed

Cheng, Zhongyao; Lian, Yumei; Kamal, Zul; Ma, Xin; Chen, Jianjun; Zhou, Xinbo; Su, Jing; Qiu, Mingfeng

2018-05-17

Nanocrystals technology is a promising method for improving the dissolution rate and enhancing the bioavailability of poorly soluble drugs. In recent years, it has been developing rapidly and applied to drug research and engineering. Nanocrystal drugs can be formulated into various dosage forms. This review mainly focused on the nanocrystals technology and its application in pharmaceutical science. Firstly, different preparation methods of nanocrystal technology and the characterization of nanocrystal drugs are briefly described. Secondly, the application of nanocrystals technology in pharmaceutical science is mainly discussed followed by the introduction of sustained release formulations. Then, the scaling up process, marketed nanocrystal drug products and regulatory aspects about nanodrugs are summarized. Finally, the specific challenges and opportunities of nanocrystals technology for pharmaceutical science are summarized and discussed. This review will provide a comprehensive guide for scientists and engineers in the field of pharmaceutical science and biochemical engineering. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Navigation studies based on the ubiquitous positioning technologies

NASA Astrophysics Data System (ADS)

Ye, Lei; Mi, Weijie; Wang, Defeng

2007-11-01

This paper summarized the nowadays positioning technologies, such as absolute positioning methods and relative positioning methods, indoor positioning and outdoor positioning, active positioning and passive positioning. Global Navigation Satellite System (GNSS) technologies were introduced as the omnipresent out-door positioning technologies, including GPS, GLONASS, Galileo and BD-1/2. After analysis of the shortcomings of GNSS, indoor positioning technologies were discussed and compared, including A-GPS, Cellular network, Infrared, Electromagnetism, Computer Vision Cognition, Embedded Pressure Sensor, Ultrasonic, RFID (Radio Frequency IDentification), Bluetooth, WLAN etc.. Then the concept and characteristics of Ubiquitous Positioning was proposed. After the ubiquitous positioning technologies contrast and selection followed by system engineering methodology, a navigation system model based on Incorporate Indoor-Outdoor Positioning Solution was proposed. And this model was simulated in the Galileo Demonstration for World Expo Shanghai project. In the conclusion, the prospects of ubiquitous positioning based navigation were shown, especially to satisfy the public location information acquiring requirement.

A Survey on Gas Sensing Technology

PubMed Central

Liu, Xiao; Cheng, Sitian; Liu, Hong; Hu, Sha; Zhang, Daqiang; Ning, Huansheng

2012-01-01

Sensing technology has been widely investigated and utilized for gas detection. Due to the different applicability and inherent limitations of different gas sensing technologies, researchers have been working on different scenarios with enhanced gas sensor calibration. This paper reviews the descriptions, evaluation, comparison and recent developments in existing gas sensing technologies. A classification of sensing technologies is given, based on the variation of electrical and other properties. Detailed introduction to sensing methods based on electrical variation is discussed through further classification according to sensing materials, including metal oxide semiconductors, polymers, carbon nanotubes, and moisture absorbing materials. Methods based on other kinds of variations such as optical, calorimetric, acoustic and gas-chromatographic, are presented in a general way. Several suggestions related to future development are also discussed. Furthermore, this paper focuses on sensitivity and selectivity for performance indicators to compare different sensing technologies, analyzes the factors that influence these two indicators, and lists several corresponding improved approaches. PMID:23012563

History of the international societies in health technology assessment: International Society for Technology Assessment in Health Care and Health Technology Assessment International.

PubMed

Banta, David; Jonsson, Egon; Childs, Paul

2009-07-01

The International Society for Technology Assessment in Health Care (ISTAHC) was formed in 1985. It grew out of the increasing awareness of the international dimensions of health technology assessment (HTA) and the need for new communication methods at the international level. The main function of ISTAHC was to present an annual conference, which gradually grew in size, and also to generally improve in quality from to year. ISTAHC overextended itself financially early in the first decade of the 2000s and had to cease its existence. A new society, Health Technology Assessment international (HTAi), based on many of the same ideas and people, grew up beginning in the year 2003. The two societies have played a large role in making the field of HTA visible to people around the world and providing a forum for discussion on the methods and role of HTA.

A Method for Selection of Appropriate Assistive Technology for Computer Access

ERIC Educational Resources Information Center

Jenko, Mojca

2010-01-01

Assistive technologies (ATs) for computer access enable people with disabilities to be included in the information society. Current methods for assessment and selection of the most appropriate AT for each individual are nonstandardized, lengthy, subjective, and require substantial clinical experience of a multidisciplinary team. This manuscript…

Cost-Effective and High-Resolution Subsurface Characterization Using Hydraulic Tomography

DTIC Science & Technology

2017-08-28

implementation and compare costs associated with HT and conventional methods. TECHNOLOGY DESCRIPTION The HT concept is analogous to the Computerized...develop guidance for HT field implementation and compare costs associated with HT and conventional methods. 15. SUBJECT TERMS Subsurface...3  2.1  TECHNOLOGY DESCRIPTION

Connecting Depth and Balance in Class

ERIC Educational Resources Information Center

Kuhn, Matthew S.

2008-01-01

Tremendous growth in educational technology tools, applications, and Web 2.0 resources have created a plethora of new methods to meet the learning needs of all students. Unfortunately, the potential of these methods is hardly understood before a new technological breakthrough makes its way into the classroom, through either teachers or, more…

Automatic building LOD copies for multitextured objects

NASA Astrophysics Data System (ADS)

Souetov, Andrew E.

2000-01-01

This article is dedicated to the research of geometry level of detail technology for systems of real-time 3D visualization. The article includes the conditions of applicability of the method, overview of existing approaches, their drawbacks and advantages. New technology guidelines are suggested as an alternative to existing methods.

Future Teachers' Dispositions toward Teaching with Geospatial Technologies

ERIC Educational Resources Information Center

Jo, Injeong

2016-01-01

This study examined the effect of a minimal Web-based GIS experience within a semester-long methods course on enhancing preservice teachers' dispositions regarding the use of geospatial technologies for teaching. Fourteen preservice teachers enrolled in a senior-level methods course offered in geography and focused exclusively on how to teach…

Alternative Assessment Methods Based on Categorizations, Supporting Technologies, and a Model for Betterment

ERIC Educational Resources Information Center

Ben-Jacob, Marion G.; Ben-Jacob, Tyler E.

2014-01-01

This paper explores alternative assessment methods from the perspective of categorizations. It addresses the technologies that support assessment. It discusses initial, formative, and summative assessment, as well as objective and subjective assessment, and formal and informal assessment. It approaches each category of assessment from the…

High-throughput genotyping of hop (Humulus lupulus L.) utilising diversity arrays technology (DArT)

USDA-ARS?s Scientific Manuscript database

Implementation of molecular methods in hop breeding is dependent on the availability of sizeable numbers of polymorphic markers and a comprehensive understanding of genetic variation. Diversity Arrays Technology (DArT) is a high-throughput cost-effective method for the discovery of large numbers of...

Triangulation and Mixed Methods Designs: Data Integration with New Research Technologies

ERIC Educational Resources Information Center

Fielding, Nigel G.

2012-01-01

Data integration is a crucial element in mixed methods analysis and conceptualization. It has three principal purposes: illustration, convergent validation (triangulation), and the development of analytic density or "richness." This article discusses such applications in relation to new technologies for social research, looking at three…

EVALUATION OF THE CARBON FOOTPRINT OF INNOVATIVE WATER MAIN REHABILITATION TECHNOLOGIES VS OPEN CUT METHODS

EPA Science Inventory

A major benefit of trenchless rehabilitation technologies touted by many practitioners when comparing their products with traditional open cut construction methods is lower carbon dioxide (CO₂) emissions. In an attempt to verify these claims, multiple tools have been d...

EVALUATION OF THE CARBON FOOTPRINT OF INNOVATIVE WATER MAIN REHABILITATION TECHNOLOGIES VS. OPEN CUT METHODS

EPA Science Inventory

A major benefit of trenchless rehabilitation technologies touted by many practitioners when comparing their products with tradition open cut construction methods is lower carbon dioxide (CO₂) emissions. In an attempt to verify these claims, multiple tools have been dev...

Migration monitoring with automated technology

Treesearch

Rhonda L. Millikin

2005-01-01

Automated technology can supplement ground-based methods of migration monitoring by providing: (1) unbiased and automated sampling; (2) independent validation of current methods; (3) a larger sample area for landscape-level analysis of habitat selection for stopover, and (4) an opportunity to study flight behavior. In particular, radar-acoustic sensor fusion can...

49 CFR 39.3 - What do the terms in this rule mean?

Code of Federal Regulations, 2010 CFR

2010-10-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology, or other effective methods of making visually delivered materials... impairment means has a history of, or has been misclassified as having, a mental or physical impairment that...

FODEM: A Multi-Threaded Research and Development Method for Educational Technology

ERIC Educational Resources Information Center

Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

2012-01-01

Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

Proceedings of the Military Operations Research Society (MORS) Workshop on Future Wargaming Developments Held at Newport, Rhode Island on 5-7 December 1989

DTIC Science & Technology

1989-12-01

game) and how this compares with other methods of analysis that might be used to accomplish the same things . Technology wargaming (TWG) has a basic goal... things that technology war games can provide that might be more successful than other methods. Games and simulations can be conducted for the purpose of...technology games for LIC scenarios. 9. Enviroment . All Services face difficult environments such as poor visibility, unsuitable road conditions, high sea

Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method.

PubMed

Janeva, Nadica; Kovacevska, Gordana; Janev, Edvard

2017-10-15

The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.

Novel optical interconnect devices and coupling methods applying self-written waveguide technology

NASA Astrophysics Data System (ADS)

Nakama, Kenichi; Mikami, Osamu

2011-05-01

For the use in cost-effective optical interconnection of opt-electronic printed wiring boards (OE-PWBs), we have developed novel optical interconnect devices and coupling methods simplifying board to board optical interconnect. All these are based on the self-written waveguide (SWW) technology by the mask-transfer method with light-curable resin. This method enables fabrication of arrayed M × N optical channels at one shot of UV light. Very precise patterns, as an example, optical rod with diameters of 50μm to 500μm, can be easily fabricated. The length of the fabricated patterns ,, typically up to about 1000μm , can be controlled by a spacer placed between the photomask and the substrate. Using these technologies, several new optical interfaces have been demonstrated. These are a chip VCSEL with an optical output rod and new coupling methods of "plug-in" alignment and "optical socket" based on SWW.

Aspects concerning verification methods and rigidity increment of complex technological systems

NASA Astrophysics Data System (ADS)

Casian, M.

2016-11-01

Any technological process and technology aims a quality and precise product, something almost impossible without high rigidity machine tools, equipment and components. Therefore, from the design phase, it is very important to create structures and machines with high stiffness characteristics. At the same time, increasing the stiffness should not raise the material costs. Searching this midpoint between high rigidity and minimum expenses leads to investigations and checks in structural components through various methods and techniques and sometimes quite advanced methods. In order to highlight some aspects concerning the significance of the mechanical equipment rigidity, the finite element method and an analytical method based on the use Mathcad software were used, by taking into consideration a subassembly of a grinding machine. Graphical representations were elaborated, offering a more complete image about the stresses and deformations able to affect the considered mechanical subassembly.

Potential for Integrating Diffusion of Innovation Principles into Life Cycle Assessment of Emerging Technologies.

PubMed

Sharp, Benjamin E; Miller, Shelie A

2016-03-15

Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.

FY90 R&D Project Descriptions ESL (Engineering & Services Laboratory) Environics Division

DTIC Science & Technology

1989-07-01

and Development Support for Subsurface Monitoring Technology 15 19007048 Pumping and Purging Contaminants 16 19007049 Methods for Selecting In Situ...Decontamination 40 3788VW17 Treatment of Chlorinated Organics with Aboveground Bioreactors 41 3788VW18 Improved Methods for Monitoring Fuel Biodegradation 42 2...Fluoride (HF) Dispersion Model 63 21036093 Solvent Capacity Field Test Method 64 21037097 Volatile Organic Compound (VOC) Control Technology 65 21037102

Sediment Management Methods to Reduce Dredging: Part 2, Sediment Collector Technology

DTIC Science & Technology

2017-04-01

Approved for public release; distribution is unlimited. ERDC TN-DOER-T13 April 2017 Sediment Management Methods to Reduce Dredging: Part 2...DOER) Program technical note (TN) is the second in a series evaluating sediment management methods to reduce dredging through a research task (RT...in the DOER Program.1 This TN presents an evaluation of sediment collector technology, one promising new device that may help better manage

Willingness of Nurses to Learn with the Use of Technology: An Exploratory Mixed-Methods Investigation

ERIC Educational Resources Information Center

Pilcher, Jobeth

2010-01-01

An increasing number of technologically enhanced tools are becoming available to meet the ongoing professional development needs of nurses. Only a few studies have addressed nurses' willingness to learn with technology, resulting in the problem of inadequate evidence to guide best practices for technology incorporation into nursing professional…

Technologies for Teaching: Strategies and Pitfalls

ERIC Educational Resources Information Center

Meloni, Julie

2011-01-01

It isn't a stretch to say that the definitions of "teaching online" and "teaching with technology" vary, even from instructor to instructor. Whatever the level of technology, and regardless of teachers' comfort level with it, one has to remember that for all that educational technology can offer through new communication methods and the ability to…

Transitioning towards the Digital Native: Examining Digital Technologies, Video Games, and Learning

ERIC Educational Resources Information Center

Salomon, John

2010-01-01

Although digital technologies have become commonplace among people who grew up around them, little is known about the effect that such technology will have on learners or its impact on traditional methods of educational delivery. This dissertation examines how certain technologies affect digital natives and seeks to understand specific…

If It's Neutral, It's Not Technology

ERIC Educational Resources Information Center

Strate, Lance

2012-01-01

Taking a media ecology perspective, this article argues that technology cannot be neutral, because it is a form of change, and it has an inherent bias based on the properties of its materials and methods. Additionally, the application of a technology is an intrinsic part of the technology itself, as is technique, instructions, software, or…

Videophone Technology and Students with Deaf-Blindness: A Method for Increasing Access and Communication

ERIC Educational Resources Information Center

Emerson, Judith; Bishop, John

2012-01-01

Introduction: Seeing the Possibilities with Videophone Technology began as research project funded by the National Center for Technology Innovation. The project implemented a face-to-face social networking program for students with deaf-blindness to investigate the potential for increasing access and communication using videophone technology.…

Experiences with New Approach to Use of Information Technologies in Education

ERIC Educational Resources Information Center

Kostolányová, Katerina

2008-01-01

Paper describes approach of Department of Information and Communication technologies (KIK) on Pedagogical Faculty of University of Ostrava in Ostrava (PedF OU) to development of information knowledge and skills of students of OU with the aid of modern methods and education technologies with support of information technologies (IT). It surveys the…

Teachers as Co-Designers of Technology-Rich Learning Activities for Early Literacy

ERIC Educational Resources Information Center

Cviko, Amina; McKenney, Susan; Voogt, Joke

2015-01-01

Although kindergarten teachers often struggle with implementing technology, they are rarely involved in co-designing technology-rich learning activities. This study involved teachers in the co-design of technology-rich learning activities and sought to explore implementation and pupil learning outcomes. A case-study method was used to investigate:…

How Do Teachers Prioritize the Adoption of Technology in the Classroom?

ERIC Educational Resources Information Center

Kurt, Serhat

2012-01-01

This study examined whether teachers prioritize the use of technology. More specifically, this paper focused on how Turkish teachers think about the importance of technology and technological tools for their daily routines. The research design employed both qualitative and quantitative methods. The data were collected through document analyses,…

Twenty-First Century Literacy and Technology in K-8 Classrooms

ERIC Educational Resources Information Center

Brown, June; Bryan, Jan; Brown, Ted

2005-01-01

Using technology to enhance literacy has been viewed in different ways by educators. Some teachers believe that new developments will fundamentally change literacy instruction; others think that technology is simply a new tool to use with old teaching methods. The question of how new technologies impact literacy instruction in K-8 classrooms is…

Internet of Things technology-based management methods for environmental specimen banks.

PubMed

Peng, Lihong; Wang, Qian; Yu, Ang

2015-02-01

The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

Beliefs and Technology--Does One Lead to the Other? Evaluating the Effects of Teacher Self-Efficacy and School Collective Efficacy on Technology Use in the Classroom

ERIC Educational Resources Information Center

Studnicki, Elaine Ann

2012-01-01

This exploratory mixed method study builds upon previous research to investigate the influence of teacher self- and collective efficacy on technology use in the classroom. This population was purposefully sampled to examine first- and second order technology barriers, instructional strategies, and human influences on technology. The quantitative…

The order and priority of research and design method application within an assistive technology new product development process: a summative content analysis of 20 case studies.

PubMed

Torrens, George Edward

2018-01-01

Summative content analysis was used to define methods and heuristics from each case study. The review process was in two parts: (1) A literature review to identify conventional research methods and (2) a summative content analysis of published case studies, based on the identified methods and heuristics to suggest an order and priority of where and when were used. Over 200 research and design methods and design heuristics were identified. From the review of the 20 case studies 42 were identified as being applied. The majority of methods and heuristics were applied in phase two, market choice. There appeared a disparity between the limited numbers of methods frequently used, under 10 within the 20 case studies, when hundreds were available. Implications for Rehabilitation The communication highlights a number of issues that have implication for those involved in assistive technology new product development: •The study defined over 200 well-established research and design methods and design heuristics that are available for use by those who specify and design assistive technology products, which provide a comprehensive reference list for practitioners in the field; •The review within the study suggests only a limited number of research and design methods are regularly used by industrial design focused assistive technology new product developers; and, •Debate is required within the practitioners working in this field to reflect on how a wider range of potentially more effective methods and heuristics may be incorporated into daily working practice.

[Isolation and identification methods of enterobacteria group and its technological advancement].

PubMed

Furuta, Itaru

2007-08-01

In the last half-century, isolation and identification methods of enterobacteria groups have markedly improved by technological advancement. Clinical microbiology tests have changed overtime from tube methods to commercial identification kits and automated identification. Tube methods are the original method for the identification of enterobacteria groups, that is, a basically essential method to recognize bacterial fermentation and biochemical principles. In this paper, traditional tube tests are discussed, such as the utilization of carbohydrates, indole, methyl red, and citrate and urease tests. Commercial identification kits and automated instruments by computer based analysis as current methods are also discussed, and those methods provide rapidity and accuracy. Nonculture techniques of nucleic acid typing methods using PCR analysis, and immunochemical methods using monoclonal antibodies can be further developed.

PD-atricians: Leveraging Physicians and Participatory Design to Develop Novel Clinical Information Tools

PubMed Central

Pollack, Ari H; Miller, Andrew; Mishra, Sonali R.; Pratt, Wanda

2016-01-01

Participatory design, a method by which system users and stakeholders meaningfully contribute to the development of a new process or technology, has great potential to revolutionize healthcare technology, yet has seen limited adoption. We conducted a design session with eleven physicians working to create a novel clinical information tool utilizing participatory design methods. During the two-hour session, the physicians quickly engaged in the process and generated a large quantity of information, informing the design of a future tool. By utilizing facilitators experienced in design methodology, with detailed domain expertise, and well integrated into the healthcare organization, the participatory design session engaged a group of users who are often disenfranchised with existing processes as well as health information technology in general. We provide insight into why participatory design works with clinicians and provide guiding principles for how to implement these methods in healthcare organizations interested in advancing health information technology. PMID:28269900

Application of CFCC technology to hot gas filtration applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richlen, S.

1995-06-01

Discussion will feature high temperature filter development under the DOE`s Office of Industrial Technologies Continuous Fiber Ceramic Composite (CFCC) Program. Within the CFCC Program there are four industry projects and a national laboratory technology support project. Atlantic Research, Babcock & Wilcox, DuPont Lanxide Composites, and Textron are developing processing methods to produce CFCC Components with various types of matrices and composites, along with the manufacturing methods to produce industrial components, including high temperature gas filters. The Oak Ridge National Laboratory is leading a National Laboratory/University effort to increase knowledge of such generic and supportive technology areas as environmental degradation, measurementmore » of mechanical properties, long-term performance, thermal shock and thermal cycling, creep and fatigue, and non-destructive characterization. Tasks include composite design, materials characterization, test methods, and performance-related phenomena, that will support the high temperature filter activities of industry and government.« less

Principles and Applications of Ultrasonic-Based Nondestructive Methods for Self-Healing in Cementitious Materials

PubMed Central

Ahn, Eunjong; Kim, Hyunjun; Sim, Sung-Han; Shin, Sung Woo; Shin, Myoungsu

2017-01-01

Recently, self-healing technologies have emerged as a promising approach to extend the service life of social infrastructure in the field of concrete construction. However, current evaluations of the self-healing technologies developed for cementitious materials are mostly limited to lab-scale experiments to inspect changes in surface crack width (by optical microscopy) and permeability. Furthermore, there is a universal lack of unified test methods to assess the effectiveness of self-healing technologies. Particularly, with respect to the self-healing of concrete applied in actual construction, nondestructive test methods are required to avoid interrupting the use of the structures under evaluation. This paper presents a review of all existing research on the principles of ultrasonic test methods and case studies pertaining to self-healing concrete. The main objective of the study is to examine the applicability and limitation of various ultrasonic test methods in assessing the self-healing performance. Finally, future directions on the development of reliable assessment methods for self-healing cementitious materials are suggested. PMID:28772640

Task–Technology Fit of Video Telehealth for Nurses in an Outpatient Clinic Setting

PubMed Central

Finkelstein, Stanley M.

2014-01-01

Abstract Background: Incorporating telehealth into outpatient care delivery supports management of consumer health between clinic visits. Task–technology fit is a framework for understanding how technology helps and/or hinders a person during work processes. Evaluating the task–technology fit of video telehealth for personnel working in a pediatric outpatient clinic and providing care between clinic visits ensures the information provided matches the information needed to support work processes. Materials and Methods: The workflow of advanced practice registered nurse (APRN) care coordination provided via telephone and video telehealth was described and measured using a mixed-methods workflow analysis protocol that incorporated cognitive ethnography and time–motion study. Qualitative and quantitative results were merged and analyzed within the task–technology fit framework to determine the workflow fit of video telehealth for APRN care coordination. Results: Incorporating video telehealth into APRN care coordination workflow provided visual information unavailable during telephone interactions. Despite additional tasks and interactions needed to obtain the visual information, APRN workflow efficiency, as measured by time, was not significantly changed. Analyzed within the task–technology fit framework, the increased visual information afforded by video telehealth supported the assessment and diagnostic information needs of the APRN. Conclusions: Telehealth must provide the right information to the right clinician at the right time. Evaluating task–technology fit using a mixed-methods protocol ensured rigorous analysis of fit within work processes and identified workflows that benefit most from the technology. PMID:24841219

Design and implementation of information visualization system on science and technology industry based on GIS

NASA Astrophysics Data System (ADS)

Wu, Xiaofang; Jiang, Liushi

2011-02-01

Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

Perceptions of Pharmacy Students, Faculty Members, and Administrators on the Use of Technology in the Classroom

PubMed Central

DiVall, Margarita V.; Hayney, Mary S; Marsh, Wallace; Neville, Michael W.; O’Barr, Stephen; Sheets, Erin D.; Calhoun, Larry D.

2013-01-01

Objectives. To gather and evaluate the perceptions of students, faculty members, and administrators regarding the frequency and appropriateness of classroom technology use. Methods. Third-year pharmacy students and faculty members at 6 colleges and schools of pharmacy were surveyed to assess their perceptions about the type, frequency, and appropriateness of using technology in the classroom. Upper-level administrators and information technology professionals were also interviewed to ascertain overall technology goals and identify criteria used to adopt new classroom technologies. Results. Four hundred sixty-six students, 124 faculty members, and 12 administrators participated in the survey. The most frequently used and valued types of classroom technology were course management systems, audience response systems, and lecture capture. Faculty members and students agreed that faculty members appropriately used course management systems and audience response systems. Compared with their counterparts, tech-savvy, and male students reported significantly greater preference for increased use of classroom technology. Eighty-six percent of faculty members reported having changed their teaching methodologies to meet student needs, and 91% of the students agreed that the use of technology met their needs. Conclusions. Pharmacy colleges and schools use a variety of technologies in their teaching methods, which have evolved to meet the needs of the current generation of students. Students are satisfied with the appropriateness of technology, but many exhibit preferences for even greater use of technology in the classroom. PMID:23716743

Use of Multimedia Technology in the Doctor-Patient Relationship for Obtaining Patient Informed Consent.

PubMed

Michalski, Andrzej; Stopa, Marcin; Miśkowiak, Bogdan

2016-10-26

Patient informed consent for surgery or for high-risk methods of treatment or diagnosis means that unlawful breach of the patient's personal interests is avoided and the patient accepts the risk of surgery and takes the brunt of it. Patient awareness - their knowledge of the condition and circumstances of continued therapeutic procedure, including offered and available methods of treatment and their possible complications - constitutes a particular aspect of the informed-consent process. The rapid development of technologies and methods of treatment may cause communication problems between the doctor and the patient regarding the scope and method of patient education prior to surgery. The use of multimedia technology (e.g., videos of surgical procedures, computer animation, and graphics), in addition to media used in preoperative patient education, may be a factor in improving the quality of the informed consent process. Studies conducted in clinical centers show that with use of multimedia technology, patients remember more of the information presented. The use of new technology also makes it possible to reduce the difference in the amount of information assimilated by patients with different levels of education. The use of media is a way to improve the quality of preoperative patient education and, at the same time, a step towards their further empowerment in the healing process.

System and method for design and optimization of grid connected photovoltaic power plant with multiple photovoltaic module technologies

DOEpatents

Thomas, Bex George; Elasser, Ahmed; Bollapragada, Srinivas; Galbraith, Anthony William; Agamy, Mohammed; Garifullin, Maxim Valeryevich

2016-03-29

A system and method of using one or more DC-DC/DC-AC converters and/or alternative devices allows strings of multiple module technologies to coexist within the same PV power plant. A computing (optimization) framework estimates the percentage allocation of PV power plant capacity to selected PV module technologies. The framework and its supporting components considers irradiation, temperature, spectral profiles, cost and other practical constraints to achieve the lowest levelized cost of electricity, maximum output and minimum system cost. The system and method can function using any device enabling distributed maximum power point tracking at the module, string or combiner level.

Creative design inspired by biological knowledge: Technologies and methods

NASA Astrophysics Data System (ADS)

Tan, Runhua; Liu, Wei; Cao, Guozhong; Shi, Yuan

2018-05-01

Biological knowledge is becoming an important source of inspiration for developing creative solutions to engineering design problems and even has a huge potential in formulating ideas that can help firms compete successfully in a dynamic market. To identify the technologies and methods that can facilitate the development of biologically inspired creative designs, this research briefly reviews the existing biological-knowledge-based theories and methods and examines the application of biological-knowledge-inspired designs in various fields. Afterward, this research thoroughly examines the four dimensions of key technologies that underlie the biologically inspired design (BID) process. This research then discusses the future development trends of the BID process before presenting the conclusions.

Implementing a national early awareness and alert system for new and emerging health technologies in Italy: the COTE Project.

PubMed

Migliore, Antonio; Perrini, Maria Rosaria; Jefferson, Tom; Cerbo, Marina

2012-07-01

The aim of this study was to establish a national Early Awareness and Alert (EAA) system for the identification and assessment of new and emerging health technologies in Italy. In 2008, Agenas, a public body supporting Regions and the Ministry of Health (MoH) in health services research, started a project named COTE (Observatory of New and Emerging Health Technologies) with the ultimate aim of implementing a national EAA system. The COTE project involved all stakeholders (MoH, Regions, Industry, Universities, technical government bodies, and Scientific Societies), in defining the key characteristics and methods of the EAA system. Agreement with stakeholders was reached using three separate workshops. During the workshops, participants shared and agreed methods for identification of new and emerging health technologies, prioritization, and assessment. The structure of the Horizon Scanning (HS) reports was discussed and defined. The main channels for dissemination of outputs were identified as the EuroScan database, and the stakeholders' Web portals. During the final workshop, Agenas presented the first three HS reports produced at national level and proposed the establishment of a permanent national EAA system. The COTE Project created the basis for a permanent national EAA system in Italy. An infrastructure to enable the stakeholders network to grow was created, methods to submit new and emerging health technologies for possible evaluation were established, methods for assessment of the technologies selected were defined, and the stakeholders involvement was delineated (in the identification, assessment, and dissemination stages).

A study of topics for distance education-A survey of U.S. Fish and Wildlife Service employees

USGS Publications Warehouse

Ratz, Joan M.; Schuster, Rudy M.; Marcy, Ann H.

2011-01-01

The purpose of this study was to identify training topics and distance education technologies preferred by U.S. Fish and Wildlife Service employees. This study was conducted on behalf of the National Conservation Training Center to support their distance education strategy planning and implementation. When selecting survey recipients, we focused on employees in positions involving conservation and environmental education and outreach programming. We conducted the study in two phases. First, we surveyed 72 employees to identify useful training topics. The response rate was 61 percent; respondents were from all regions and included supervisors and nonsupervisors. Five topics for training were identified: creating and maintaining partnerships (partnerships), technology, program planning and development (program planning), outreach methods to engage the community (outreach methods), and evaluation methods. In the second phase, we surveyed 1,488 employees to assess preferences for training among the five topics identified in the first survey and preferences among six distance education technologies: satellite television, video conferencing, audio conferencing, computer mediated training, written resources, and audio resources. Two types of instructor-led training were included on the survey to compare to the technology options. Respondents were asked what types of information, such as basic facts or problem solving skills, were needed for each of the five topics. The adjusted response rate was 64 percent; respondents were from all regions and included supervisors and nonsupervisors. The results indicated clear preferences among respondents for certain training topics and technologies. All five training topics were valued, but the topics of partnerships and technology were given equal value and were valued more than the other three topics. Respondents indicated a desire for training on the topics of partnerships, technology, program planning, and outreach methods. For the six distance education technologies, respondents indicated different levels of usability and access. Audio conferencing and written resources were reported to be most usable and accessible. The ratings of technology usability/access differed according to region; respondents in region 9 rated most technologies higher on usability/access. Respondents indicated they would take courses through either onsite or distance education approaches, but they prefer onsite training for most topics and most types of information.

The analysis of waste treatment methods and managerial skills towards the effectiveness of CO2 emmissions (an ex post facto study at TPA Bantar Gebang Bekasi)

NASA Astrophysics Data System (ADS)

Ria Rajagukguk, Jenni; Siagian, Lestina

2017-09-01

In the last three years, Java Island produces 29.413.336 m3/year of waste, coming from settlement (house hold) and non-settlement waste. Recently, this waste is managed with conventional technology, composting and recycling. Based on law No. 18 of 2008 on Waste Management, Chapter III Article 5, it is firmly stated that the government and regional governments are responsible for ensuring proper and environmentally sound waste management in accordance with the objectives. The observation of managerial skills is highly needed to investigate the operation of waste management at TPA Bantar Gebang towards the effectiveness of CO2 emissions.The problems are (1)Whether there is any influence between the method of waste management through Biogas Technology to the effectiveness of CO2 emissions. (2) Whether there is any influence between managerial skills to effectiveness of CO2 emission. (3) Whether there is any simultaneous influence between waste management method and managerial skill to CO2 emission effectiveness and (4) how is the method of waste management. Quantitative and egineering method were used to process the data.Biogas Technology variables and Managerial Skill are simultaneously and significantly influenced to CO2 Emission Effectiveness, this is based on Fh > Ft value of 168,453 > 3.072467) and its significance is 0.000 < 0,05. Then Ho was rejected and Ha was accepted which means that variable of Managerial Skill have influence or very big influence to Effeciveness of CO2 Emission, Correlation coefficient value 94,1% which means there is very strong relation between variable of Biogas Technology, Managerial Skill to Effectiveness of CO2 emission. Then Technology management through Biogas Technology is anaerobic biology.

Implementation of laser technology and treatment at county level in the Swedish Public Dental Service.

PubMed

Bergholm, Åsa; Östberg, Anna-Lena; Gabre, Pia

2014-01-01

The aim of this study was to obtain an understanding of the factors that affected the way new technology and methods were used in dentistry after a training program. A qualitative research method was used to collect data. Nine dentists working in the Public Dental Service (PDS) in Uppsala County in Sweden agreed to be interviewed in the study. They worked in five different clinics, all with laser equipment, and had received training in the use of lasers. The interviews were tape recorded and transcribed, and were analysed using manifest and latent qualitative content analysis. The categories in this study were identified as "Prerequisites and obstacles to imple- mentation", "Attitudes to laser technology and treatments" and "Laser technology in the future'". The dentists described working with lasers as complicated and problematic. They had concerns about the method relating to the working environment, evidence of efficacy of treatment, costs, and benefits for patients and dentists. The main finding was that the decision to adopt the technology seemed to be based on individual perceptions of the value of lasers compared to other ways of achieving the same goal. They provided uniform proposals regarding how an organization should implement new methods, including an emphasis on the importance of preparation and having opportunities to be able to test and evaluate the technology. Another important factor was support from surrounding staff, colleagues and management. Despite all the barriers, the respondents were positive about working with lasers in the future, mainly due to their belief that patients would demand laser treatment. In conclusion both individual and organizational factors affected the extent to which the respondents used the laser. The main finding was the individual perception of the value of lasers compared to other methods which could achieve the same goal.

Activated Dual Specificity Lymphocytes and Their Methods of Use | NCI Technology Transfer Center | TTC

Cancer.gov

Researchers at the NCI have developed a method of using genetic modifications to generate leukocytes with multiple specificities. This technology represents a potential therapy for a wide variety of malignancies, and because of the genetic modification used, this therapy will be applicable to patients of any MHC type.

Inquiring the Most Critical Teacher's Technology Education Competences in the Highest Efficient Technology Education Learning Organization

ERIC Educational Resources Information Center

Yung-Kuan, Chan; Hsieh, Ming-Yuan; Lee, Chin-Feng; Huang, Chih-Cheng; Ho, Li-Chih

2017-01-01

Under the hyper-dynamic education situation, this research, in order to comprehensively explore the interplays between Teacher Competence Demands (TCD) and Learning Organization Requests (LOR), cross-employs the data refined method of Descriptive Statistics (DS) method and Analysis of Variance (ANOVA) and Principal Components Analysis (PCA)…

Mathematics Achievement: Traditional Instruction and Technology-Assisted Course Delivery Methods

ERIC Educational Resources Information Center

Vilardi, Robert

2013-01-01

The purpose of this study was to analyze technology-assisted course delivery methods to determine their overall effectiveness as it pertains to mathematics courses. This study analyzed both current and historical data in mathematics classes in the areas of achievement, retention, and grade distribution. The goal of this study was to determine if…

Mathematics Achievement: Traditional Instruction and Technology-Assisted Course Delivery Methods

ERIC Educational Resources Information Center

Vilardi, Robert; Rice, Margaret L.

2014-01-01

The purpose of this study was to analyze technology-assisted course delivery methods to determine their overall effectiveness as it pertains to mathematics courses. This study analyzed both current and historical data in the areas of achievement, retention, and grade distribution for mathematics classes. The study included 14,562 students enrolled…

Examining the Use of Lecture Capture Technology: Implications for Teaching and Learning

ERIC Educational Resources Information Center

Groen, Jovan F.; Quigley, Brenna; Herry, Yves

2016-01-01

This study sought to provide a better understanding of how lecture capture technology is used by students and how its use is related to student satisfaction, attendance, and academic performance. Using a mixed method design with both quantitative and qualitative methods to collect data, instruments included a student questionnaire, interviews and…

Technology Adoption in Secondary Mathematics Teaching in Kenya: An Explanatory Mixed Methods Study

ERIC Educational Resources Information Center

Kamau, Leonard Mwathi

2014-01-01

This study examined the factors related to technology adoption by secondary mathematics teachers in Nyandarua and Nairobi counties in the Republic of Kenya. Using a sequential explanatory mixed methods approach, I collected qualitative data from interviews and classroom observations of six teachers to better understand statistical results from the…

Use of Web Technology and Active Learning Strategies in a Quality Assessment Methods Course.

ERIC Educational Resources Information Center

Poirier, Therese I.; O'Neil, Christine K.

2000-01-01

The authors describe and evaluate quality assessment methods in a health care course that utilized web technology and various active learning strategies. The course was judged successful by student performance, evaluations and student assessments. The instructors were pleased with the outcomes achieved and the educational pedagogy used for this…

Perceptions of Technology-Mediated Instruction at a Southeastern Community College

ERIC Educational Resources Information Center

Patton, MarQo

2017-01-01

This qualitative dominant, mixed methods research study examined student and instructor perceptions of technology used to mediate learning in a community college environment. Methods of data collection for this study included a questionnaire with Likert scale and open response items, student and instructor interviews, and an analysis of a random…

Technologies of Student Testing for Learning Quality Evaluation in the System of Higher Education

ERIC Educational Resources Information Center

Bayukova, Nadezhda Olegovna; Kareva, Ludmila Alexandrovna; Rudometova, Liliya Tarasovna; Shlangman, Marina Konstantinovna; Yarantseva, Natalia Vladislavovna

2015-01-01

The paper deals with technology of students' achievement in the area of educational activities, methods, techniques, forms and conditions of monitoring knowledge quality in accordance with the requirements of Russian higher education system modernization. The authors propose methodic techniques of students' training for testing based on innovative…

Using Inquiry-Based Strategies for Enhancing Students' STEM Education Learning

ERIC Educational Resources Information Center

Lai, Ching-San

2018-01-01

The major purpose of this study was to investigate whether or not the inquiry-based method is effective in improving students' learning in STEM (Science, Technology, Engineering, and Mathematics) education. Both quantitative and qualitative methods were used. A total of 73 college students studying Information Technology (IT) were chosen as…

An improved method for collecting and monitoring pine oleoresin

Treesearch

Dick Karsky; Brian Strom; Harold Thistle

2004-01-01

A new method for collecting and monitoring pine oleoresin has been developed through a cooperative project involving the Missoula Technology Development Center (MTDC), Southern Research Station (Brian Strom, research entomologist), and the Forest Health Technology Enterprise Team. The new sampling unit (figure 1) is cast from rugged plastic. It provides a closed system...

Review and Future Research Directions about Major Monitoring Method of Soil Erosion

NASA Astrophysics Data System (ADS)

LI, Yue; Bai, Xiaoyong; Tian, Yichao; Luo, Guangjie

2017-05-01

Soil erosion is a highly serious ecological problem that occurs worldwide. Hence,scientific methods for accurate monitoring are needed to obtain soil erosion data. At present,numerous methods on soil erosion monitoring are being used internationally. In this paper, wepresent a systematic classification of these methods based on the date of establishment andtype of approach. This classification comprises five categories: runoff plot method, erosion pinmethod, radionuclide tracer method, model estimation, and 3S technology combined method.The backgrounds of their establishment are briefly introduced, the history of their developmentis reviewed, and the conditions for their application are enumerated. Their respectiveadvantages and disadvantages are compared and analysed, and future prospects regarding theirdevelopment are discussed. We conclude that the methods of soil erosion monitoring in the past 100 years of their development constantly considered the needs of the time. According to the progress of soil erosion monitoring technology throughout its history, we predict that the future trend in this field would move toward the development of quantitative, precise, and composite methods. This report serves as a valuable reference for scientific and technological workers globally, especially those engaged in soil erosion research.

ULTROX INTERNATIONAL ULTRAVIOLET RADIATION/OXIDATION TECHNOLOGY APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

In support of the U.S. Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) Program, this report evaluates the Ultrox International technology and its applicability as an on-site treatment method for contaminated groundwater. The ULTROX® techn...

GUIDE TO CLEANER TECHNOLOGIES: ALTERNATIVE METAL FINISHES

EPA Science Inventory

A cleaner technology is a source reduction or recycle method applied to eliminate or significantly reduce the amount of any hazardous substance, pollutant, or contaminant released to the environment. The emphasis of cleaner technologies is on process changes that can prevent poll...

Why Information Technologies Fail.

ERIC Educational Resources Information Center

Gayeski, Diane M.

1989-01-01

Discusses successes and failures in the field of instructional technology and suggests methods to design more appropriate systems that would present fewer barriers to adoption. Topics discussed include educational television; videotext; video technology; audiovisual aids; teleconferencing; computer assisted instruction; interactive video; CD-ROM;…

Our Way Into the Twenty-First Century: The Meaning of Educational Technology

ERIC Educational Resources Information Center

Muller, Gerhard K.

1969-01-01

Discusses the strongly connotative meanings of educational technology, the role social attitudes play in changing educational philosophies and methods, and suggests a systematic frame of analysis for rational development of new educational technology in West Germany. (DE)

Control of oil spills in high speed currents : a technology assessment

DOT National Transportation Integrated Search

1999-05-01

A technology assessment has been conducted to analyze the threat of oil spills in fast currents. Technologies and methods for response were evaluated, and promising equipment and strategies were identified. Recommendations are made to pursue those me...

Diversity and Control of Spoilage Fungi in Dairy Products: An Update

PubMed Central

Valence, Florence; Mounier, Jérôme

2017-01-01

Fungi are common contaminants of dairy products, which provide a favorable niche for their growth. They are responsible for visible or non-visible defects, such as off-odor and -flavor, and lead to significant food waste and losses as well as important economic losses. Control of fungal spoilage is a major concern for industrials and scientists that are looking for efficient solutions to prevent and/or limit fungal spoilage in dairy products. Several traditional methods also called traditional hurdle technologies are implemented and combined to prevent and control such contaminations. Prevention methods include good manufacturing and hygiene practices, air filtration, and decontamination systems, while control methods include inactivation treatments, temperature control, and modified atmosphere packaging. However, despite technology advances in existing preservation methods, fungal spoilage is still an issue for dairy manufacturers and in recent years, new (bio) preservation technologies are being developed such as the use of bioprotective cultures. This review summarizes our current knowledge on the diversity of spoilage fungi in dairy products and the traditional and (potentially) new hurdle technologies to control their occurrence in dairy foods. PMID:28788096

Analysis of plant microbe interactions in the era of next generation sequencing technologies

PubMed Central

Knief, Claudia

2014-01-01

Next generation sequencing (NGS) technologies have impressively accelerated research in biological science during the last years by enabling the production of large volumes of sequence data to a drastically lower price per base, compared to traditional sequencing methods. The recent and ongoing developments in the field allow addressing research questions in plant-microbe biology that were not conceivable just a few years ago. The present review provides an overview of NGS technologies and their usefulness for the analysis of microorganisms that live in association with plants. Possible limitations of the different sequencing systems, in particular sources of errors and bias, are critically discussed and methods are disclosed that help to overcome these shortcomings. A focus will be on the application of NGS methods in metagenomic studies, including the analysis of microbial communities by amplicon sequencing, which can be considered as a targeted metagenomic approach. Different applications of NGS technologies are exemplified by selected research articles that address the biology of the plant associated microbiota to demonstrate the worth of the new methods. PMID:24904612

EXTRAPOLATION METHOD FOR MAXIMAL AND 24-H AVERAGE LTE TDD EXPOSURE ESTIMATION.

PubMed

Franci, D; Grillo, E; Pavoncello, S; Coltellacci, S; Buccella, C; Aureli, T

2018-01-01

The Long-Term Evolution (LTE) system represents the evolution of the Universal Mobile Telecommunication System technology. This technology introduces two duplex modes: Frequency Division Duplex and Time Division Duplex (TDD). Despite having experienced a limited expansion in the European countries since the debut of the LTE technology, a renewed commercial interest for LTE TDD technology has recently been shown. Therefore, the development of extrapolation procedures optimised for TDD systems becomes crucial, especially for the regulatory authorities. This article presents an extrapolation method aimed to assess the exposure to LTE TDD sources, based on the detection of the Cell-Specific Reference Signal power level. The method introduces a βTDD parameter intended to quantify the fraction of the LTE TDD frame duration reserved for downlink transmission. The method has been validated by experimental measurements performed on signals generated by both a vector signal generator and a test Base Transceiver Station installed at Linkem S.p.A facility in Rome. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Optimizing the construction of devices to control inaccesible surfaces - case study

NASA Astrophysics Data System (ADS)

Niţu, E. L.; Costea, A.; Iordache, M. D.; Rizea, A. D.; Babă, Al

2017-10-01

The modern concept for the evolution of manufacturing systems requires multi-criteria optimization of technological processes and equipments, prioritizing associated criteria according to their importance. Technological preparation of the manufacturing can be developed, depending on the volume of production, to the limit of favourable economical effects related to the recovery of the costs for the design and execution of the technological equipment. Devices, as subsystems of the technological system, in the general context of modernization and diversification of machines, tools, semi-finished products and drives, are made in a multitude of constructive variants, which in many cases do not allow their identification, study and improvement. This paper presents a case study in which the multi-criteria analysis of some structures, based on a general optimization method, of novelty character, is used in order to determine the optimal construction variant of a control device. The rational construction of the control device confirms that the optimization method and the proposed calculation methods are correct and determine a different system configuration, new features and functions, and a specific method of working to control inaccessible surfaces.

A Meta-Analysis Method to Advance Design of Technology-Based Learning Tool: Combining Qualitative and Quantitative Research to Understand Learning in Relation to Different Technology Features

ERIC Educational Resources Information Center

Zhang, Lin

2014-01-01

Educators design and create various technology tools to scaffold students' learning. As more and more technology designs are incorporated into learning, growing attention has been paid to the study of technology-based learning tool. This paper discusses the emerging issues, such as how can learning effectiveness be understood in relation to…

Research on Network Defense Strategy Based on Honey Pot Technology

NASA Astrophysics Data System (ADS)

Hong, Jianchao; Hua, Ying

2018-03-01

As a new network security technology of active defense, The honeypot technology has become a very effective and practical method of decoy attackers. The thesis discusses the theory, structure, characteristic, design and implementation of Honeypot in detail. Aiming at the development of means of attack, put forward a kind of network defense technology based on honeypot technology, constructing a virtual Honeypot demonstrate the honeypot’s functions.

Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeh, B.

2011-03-01

This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

Science-Technology-Society literacy in college non-majors biology: Comparing problem/case studies based learning and traditional expository methods of instruction

NASA Astrophysics Data System (ADS)

Peters, John S.

This study used a multiple response model (MRM) on selected items from the Views on Science-Technology-Society (VOSTS) survey to examine science-technology-society (STS) literacy among college non-science majors' taught using Problem/Case Studies Based Learning (PBL/CSBL) and traditional expository methods of instruction. An initial pilot investigation of 15 VOSTS items produced a valid and reliable scoring model which can be used to quantitatively assess student literacy on a variety of STS topics deemed important for informed civic engagement in science related social and environmental issues. The new scoring model allows for the use of parametric inferential statistics to test hypotheses about factors influencing STS literacy. The follow-up cross-institutional study comparing teaching methods employed Hierarchical Linear Modeling (HLM) to model the efficiency and equitability of instructional methods on STS literacy. A cluster analysis was also used to compare pre and post course patterns of student views on the set of positions expressed within VOSTS items. HLM analysis revealed significantly higher instructional efficiency in the PBL/CSBL study group for 4 of the 35 STS attitude indices (characterization of media vs. school science; tentativeness of scientific models; cultural influences on scientific research), and more equitable effects of traditional instruction on one attitude index (interdependence of science and technology). Cluster analysis revealed generally stable patterns of pre to post course views across study groups, but also revealed possible teaching method effects on the relationship between the views expressed within VOSTS items with respect to (1) interdependency of science and technology; (2) anti-technology; (3) socioscientific decision-making; (4) scientific/technological solutions to environmental problems; (5) usefulness of school vs. media characterizations of science; (6) social constructivist vs. objectivist views of theories; (7) impact of cultural religious/ethical views on science; (8) tentativeness of scientific models, evidence and predictions; (9) civic control of technological developments. This analysis also revealed common relationships between student views which would not have been revealed under the original unique response model (URM) of VOSTS and also common viewpoint patterns that warrant further qualitative exploration.

Databases, data integration, and expert systems: new directions in mineral resource assessment and mineral exploration

USGS Publications Warehouse

McCammon, Richard B.; Ramani, Raja V.; Mozumdar, Bijoy K.; Samaddar, Arun B.

1994-01-01

Overcoming future difficulties in searching for ore deposits deeper in the earth's crust will require closer attention to the collection and analysis of more diverse types of data and to more efficient use of current computer technologies. Computer technologies of greatest interest include methods of storage and retrieval of resource information, methods for integrating geologic, geochemical, and geophysical data, and the introduction of advanced computer technologies such as expert systems, multivariate techniques, and neural networks. Much experience has been gained in the past few years in applying these technologies. More experience is needed if they are to be implemented for everyday use in future assessments and exploration.

Shuttle Ground Operations Efficiencies/Technologies (SGOE/T) study. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Scholz, A. L.; Hart, M. T.; Lowry, D. J.

1987-01-01

Methods and technolgoy were defined to reduce the overall operations cost of a major space program. Space Shuttle processing at Kennedy Space Center (KSC) was designed as the working model that would be the source of the operational information. Methods of improving efficiency of ground operations were assessed and technology elements that could reduce cost identified. Emphasis is on: (1) specific technology items and (2) management approaches required to develop and support efficient ground operations. Prime study results are to be recommendations on how to achieve more efficient operations and identification of existing or new technology that would make vehicle processing in both the current program and future programs more efficient and, therefore, less costly.

Early Validity and Reliability Data for Two Instruments Assessing the Predispositions People Have toward Technology Use: Continued Integration of Quantitative and Qualitative Methods.

ERIC Educational Resources Information Center

Scherer, Marcia J.; McKee, Barbara G.

Validity and reliability data are presented for two instruments for assessing the predispositions that people have toward the use of assistive and educational technologies. The two instruments, the Assistive Technology Device Predisposition Assessment (ATDPA) and the Educational Technology Predisposition Assessment (ETPA), are self-report…

A Pre-Service Teacher Training Model with Instructional Technology Graduate Students as Peer Coaches to Elementary Pre-Service Teachers

ERIC Educational Resources Information Center

Slagter van Tryon, Patricia J.; Schwartz, Catherine Stein

2012-01-01

This paper describes a peer coaching collaboration between graduate students in a Master's program in Instructional Technology and undergraduate pre-service teachers enrolled in an elementary mathematics methods course. Integrated as a major project in a graduate level K-12 technology integration course, the Instructional Technology students…

Technology and Multiculturalism in the Classroom: Case Studies in Attitudes and Motivations.

ERIC Educational Resources Information Center

Chisholm, Ines Marquez; Wetzel, Keith

2001-01-01

Uses a case study approach in examining the attitudes and motivations of five teacher educators who used technology in their classroom. Identifies and discusses six common elements of multicultural technology integration and concludes with a general discussion on the need to combine pedagogical methods with a practical vision of technology use and…

Applying Laser Cutting Techniques through Horology for Teaching Effective STEM in Design and Technology

ERIC Educational Resources Information Center

Jones, Lewis C. R.; Tyrer, John R.; Zanker, Nigel P.

2013-01-01

This paper explores the pedagogy underpinning the use of laser manufacturing methods for the teaching of science, technology, engineering and mathematics (STEM) at key stage 3 design and technology. Clock making (horology) has been a popular project in design and technology (D&T) found in many schools, typically it focuses on aesthetical…

Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

2012-01-01

Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

Technological Modeling: Faculty Use of Technologies in Preservice Teacher Education from 2004 to 2012

ERIC Educational Resources Information Center

Hughes, Joan E.; Liu, Sa; Lim, Mihyun

2016-01-01

This 7-year, cross-sectional study of a 1:1 laptop teacher preparatory program in the United States examined the nature and change in faculty technological modeling. Using survey methods, preservice teachers (n = 932) reported their faculty's use of technological activities in coursework. Through descriptive statistics, chi-square tests, and…

Understanding Technology Acceptance in Pre-Service Teachers of Primary Mathematics in Hong Kong

ERIC Educational Resources Information Center

Wong, Gary K. W.

2015-01-01

The adoption of educational technology in teaching depends on how well a teacher accepts it. This paper draws on a technology acceptance survey of pre-service primary mathematics teachers in Hong Kong to study the factors influencing their technology acceptance. This work adopted a mixed method approach, in which quantitative data were collected…

A Technology Immune Technology Enabled Problem within an Action on Objects Framework: Stamping Functions

ERIC Educational Resources Information Center

Connell, Michael; Abramovich, Sergei

2017-01-01

This paper illustrates how the notion of Technology Immune Technology Enabled (TITE) problems (Abramovich, 2014), in this case an exploration of variations in surface area we refer to as Stamping Functions, might be incorporated into a K-6 mathematics methods class operating within an Action on Objects framework (Connell, 2001). TITE problems have…

A Systematic Review Approach to Technologies Used for Learning and Education

ERIC Educational Resources Information Center

Purarjomandlangrudi, Afrooz; Chen, David; Nguyen, Anne

2015-01-01

E-learning is implementation of technologies in learning process and is growing at a very rapid pace. E-learning technology has matured noticeably and the majority of organisations are taking advantage of it in their educational systems. However, there is a lack of methodical and consistent paradigm of these technologies in literature. The purpose…

Methods and systems for rapid prototyping of high density circuits

DOEpatents

Palmer, Jeremy A [Albuquerque, NM; Davis, Donald W [Albuquerque, NM; Chavez, Bart D [Albuquerque, NM; Gallegos, Phillip L [Albuquerque, NM; Wicker, Ryan B [El Paso, TX; Medina, Francisco R [El Paso, TX

2008-09-02

A preferred embodiment provides, for example, a system and method of integrating fluid media dispensing technology such as direct-write (DW) technologies with rapid prototyping (RP) technologies such as stereolithography (SL) to provide increased micro-fabrication and micro-stereolithography. A preferred embodiment of the present invention also provides, for example, a system and method for Rapid Prototyping High Density Circuit (RPHDC) manufacturing of solderless connectors and pilot devices with terminal geometries that are compatible with DW mechanisms and reduce contact resistance where the electrical system is encapsulated within structural members and manual electrical connections are eliminated in favor of automated DW traces. A preferred embodiment further provides, for example, a method of rapid prototyping comprising: fabricating a part layer using stereolithography and depositing thermally curable media onto the part layer using a fluid dispensing apparatus.

Titanium dioxide in fuel cell technology: An overview

NASA Astrophysics Data System (ADS)

Abdullah, N.; Kamarudin, S. K.

2015-03-01

Fuel cell technology is one of the alternative energy sources for the next generation. Although this technology has proven to be one of the main methods for producing new energy sources, fuel cell technology still has some problems that hinder fuel cell commercialization. Recently, new ideas on titanium dioxide are introduced as potential solution in several applications in fuel cell technology. Thus, this article presents an overview on the applications of titanium dioxide and highlights the unique properties and benefits of titanium dioxide in fuel cell technology.

Physics Learning Strategies with Multi-touch Technology

NASA Astrophysics Data System (ADS)

Potter, Mark; Ilie, C.; Schofield, D.

2011-03-01

Advancements in technology have opened doorways to build new teaching and learning methods. Through conjunctive use of these technologies and methods, a classroom can be enriched to stimulate and improve student learning. The purpose of our research is to ascertain whether or not multi-touch technology enhances students' abilities to better comprehend and retain the knowledge taught in physics. At their basis, students learn via visual, aural, reading/writing, and kinesthetic styles. Labs provide for all but the aural style, while lectures lack kinesthetic learning. Pedagogical research indicates that kinesthetic learning is a fundamental, powerful, and ubiquitous learning style. By using multi-touch technology in lecture, not only can we accommodate kinesthetic learners, but we can also enrich the experiences of visual learners. Ushering to this wider array of students will hopefully lead to an increase in meaningful learning.

Cloud and Traditional Videoconferencing Technology for Telemedicine and Distance Learning

PubMed Central

Zhang, Kai; Locatis, Craig; Ackerman, Michael

2015-01-01

Abstract Introduction: Cloud-based videoconferencing versus traditional systems are described for possible use in telemedicine and distance learning. Materials and Methods: Differences between traditional and cloud-based videoconferencing systems are examined, and the methods for identifying and testing systems are explained. Findings are presented characterizing the cloud conferencing genre and its attributes versus traditional H.323 conferencing. Results: Because the technology is rapidly evolving and needs to be evaluated in reference to local needs, it is strongly recommended that this or other reviews not be considered substitutes for personal hands-on experience. Conclusions: This review identifies key attributes of the technology that can be used to appraise the relevance of cloud conferencing technology and to determine whether migration from traditional technology to a cloud environment is warranted. An evaluation template is provided for assessing systems appropriateness. PMID:25785761

Fish genome manipulation and directional breeding.

PubMed

Ye, Ding; Zhu, ZuoYan; Sun, YongHua

2015-02-01

Aquaculture is one of the fastest developing agricultural industries worldwide. One of the most important factors for sustainable aquaculture is the development of high performing culture strains. Genome manipulation offers a powerful method to achieve rapid and directional breeding in fish. We review the history of fish breeding methods based on classical genome manipulation, including polyploidy breeding and nuclear transfer. Then, we discuss the advances and applications of fish directional breeding based on transgenic technology and recently developed genome editing technologies. These methods offer increased efficiency, precision and predictability in genetic improvement over traditional methods.

Technology Enabled Learning. Symposium.

ERIC Educational Resources Information Center

2002

This document contains three papers on technology-enabled learning and human resource development. Among results found in "Current State of Technology-enabled Learning Programs in Select Federal Government Organizations: a Case Study of Ten Organizations" (Letitia A. Combs) are the following: the dominant delivery method is traditional…

Cooperation, Technology, and Performance: A Case Study.

ERIC Educational Resources Information Center

Cavanagh, Thomas; Dickenson, Sabrina; Brandt, Suzanne

1999-01-01

Describes the CTP (Cooperation, Technology, and Performance) model and explains how it is used by the Department of Veterans Affairs-Veteran's Benefit Administration (VBA) for training. Discusses task analysis; computer-based training; cooperative-based learning environments; technology-based learning; performance-assessment methods; courseware…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION: TECHNOLOGY PROFILES, NINTH EDITION

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program, now in its eleventh year, is an integral part of EPA's research into alternative cleanup methods for hazardous waste sites around the nation. The SITE Program was created to encourage the development and routine use o...

Project for the analysis of technology transfer

NASA Technical Reports Server (NTRS)

Kottenstette, J. P.; Freeman, J. E.; Staskin, E. R.

1971-01-01

The special task of preparing technology transfer profiles during the first six months of 1971 produced two major results: refining a new method for identifying and describing technology transfer activities, and generating practical insights into a number of issues associated with transfer programs.

Living Lab as an Agile Approach in Developing User-Friendly Welfare Technology.

PubMed

Holappa, Niina; Sirkka, Andrew

2017-01-01

This paper discusses living lab as a method of developing user-friendly welfare technology, and presents a qualitative evaluation research of how living lab tested technologies impacted on the life of healthcare customers and professionals over test periods.

[Establishment of prescription research technology system in Chinese medicine secondary exploitation based on "component structure" theory].

PubMed

Cheng, Xu-Dong; Feng, Liang; Gu, Jun-Fei; Zhang, Ming-Hua; Jia, Xiao-Bin

2014-11-01

Chinese medicine prescriptions are the wisdom outcomes of traditional Chinese medicine (TCM) clinical treatment determinations which based on differentiation of symptoms and signs. Chinese medicine prescriptions are also the basis of secondary exploitation of TCM. The study on prescription helps to understand the material basis of its efficacy, pharmacological mechanism, which is an important guarantee for the modernization of traditional Chinese medicine. Currently, there is not yet dissertation n the method and technology system of basic research on the prescription of Chinese medicine. This paper focuses on how to build an effective system of prescription research technology. Based on "component structure" theory, a technology system contained four-step method that "prescription analysis, the material basis screening, the material basis of analysis and optimization and verify" was proposed. The technology system analyzes the material basis of the three levels such as Chinese medicine pieces, constituents and the compounds which could respect the overall efficacy of Chinese medicine. Ideas of prescription optimization, remodeling are introduced into the system. The technology system is the combination of the existing research and associates with new techniques and methods, which used for explore the research thought suitable for material basis research and prescription remodeling. The system provides a reference for the secondary development of traditional Chinese medicine, and industrial upgrading.

The Use of Technology for Phone and Face-to-Face Communication After Total Laryngectomy.

PubMed

Childes, Jana M; Palmer, Andrew D; Fried-Oken, Melanie; Graville, Donna J

2017-02-01

The purpose of this article is to describe the characteristics and experiences of individuals who use technology to support telephone or face-to-face communication after total laryngectomy. An online questionnaire was used to identify potential participants. Seventeen individuals met inclusion criteria and participated in an in-depth survey. They were compared with a reference group matched for age, gender, and time postsurgery who did not use these technologies. Open-ended responses were summarized. Compared with the matched reference group, individuals who used technology to support verbal communication had undergone more aggressive cancer treatment and used more communication methods. They were less likely to use an alaryngeal speech method, had greater difficulty over the telephone, and used more repair strategies in face-to-face communication. The 2 groups did not differ significantly in the frequency or success of their communication, however. Open-ended responses revealed great variety with regard to their reasons, purposes, and timing of technology use. There is a subset of individuals using technology to support verbal communication very successfully after laryngectomy. Usage was not limited to those who were unable to communicate verbally and often continued long after the initial postoperative period in many settings, for various purposes, and in combination with other methods of communication.

Research requirements to reduce civil helicopter life cycle cost

NASA Technical Reports Server (NTRS)

Blewitt, S. J.

1978-01-01

The problem of the high cost of helicopter development, production, operation, and maintenance is defined and the cost drivers are identified. Helicopter life cycle costs would decrease by about 17 percent if currently available technology were applied. With advanced technology, a reduction of about 30 percent in helicopter life cycle costs is projected. Technological and managerial deficiencies which contribute to high costs are examined, basic research and development projects which can reduce costs include methods for reduced fuel consumption; improved turbine engines; airframe and engine production methods; safety; rotor systems; and advanced transmission systems.

NASA gear research and its probable effect on rotorcraft transmission design

NASA Technical Reports Server (NTRS)

Zaretsky, E. V.; Townsend, D. P.; Coy, J. J.

1979-01-01

The NASA Lewis Research Center devised a comprehensive gear technology research program beginning in 1969, the results of which are being integrated into the NASA civilian Helicopter Transmission System Technology Program. Attention is given to the results of this gear research and those programs which are presently being undertaken. In addition, research programs studying pitting fatigue, gear steels and processing, life prediction methods, gear design and dynamics, elastohydrodynamic lubrication, lubrication methods and gear noise are presented. Finally, the impact of advanced gear research technology on rotorcraft transmission design is discussed.

[National physician master Jin Shiyuan's dispensing technology of Aconiti Lateralis Radix Praeparata based on Li Shizhen's pharmaceutical academic thought].

PubMed

Yuan, Yi-Ping; Zhai, Hua-Qiang; Guo, Zhao-Juan; Zhang, Tian; Kong, Li-Ting; Jia, Xiao-Yu; Tian, Wei-Lan; Li, Rui

2016-05-01

To collect Li Shizhen's experience in Aconiti Lateralis Radix Praeparata identification and clinical application, compare and analyze national physician master Jin Shiyuan's practical operation and theoretical knowledge, which is beneficial for the inheritance and improvement of Aconiti Lateralis Radix Praeparata clinical dispensing technology. In the analysis process, CNKI, Wanfang and other databases were searched with "Aconiti Lateralis Radix Praeparata", "Li Shizhen", "pharmacological method state theory" "Jin Shiyuan" and "Chinese medicine dispensing technology" as the key words. In addition, Treatise on Febrile Disease, Compendium of Materia Medica, Chinese Pharmacopoeia(2015 edition), Notes to Medical Professions(Yi Zong Shuo Yue), and other medicine books were accessed to summarize the processing methods and decoction dosage of Aconiti Lateralis Radix Praeparata in both ancient and modern medicine, and in consideration of technical research and practice operation, Li Shizhen's description of Aconiti Lateralis Radix Praeparata and Professor Jin Shiyuan's research on Aconiti Lateralis Radix Praeparata dispensing technology were analyzed and collected. Li Shizhen recorded the nature identification and clinical application of Aconiti Lateralis Radix Praeparata by using pharmacological method state theory in Compendium of Materia Medica. National physician master Jin Shiyuan carries forward the essence of Li Shizhen's pharmaceutical academic thought with his own proficient knowledge structure in medicine, providing scientific pharmaceutical service for clinical application of Aconiti Lateralis Radix Praeparata Professor. Jin Shiyuan put forward the dispensing technology for the first time, including nature identification technology, clinical processing technology, clinical decocting technology, prescription coping technology, and class specifications of Aconiti Lateralis Radix Praeparata. In this paper, Aconiti Lateralis Radix Praeparata was used as an example to analyze the key dispensing technology of traditional Chinese medicine, and apply the key dispensing technology of traditional Chinese medicine in various commonly used Chinese medicines in the future. Copyright© by the Chinese Pharmaceutical Association.

Research on control technology of hardware parallelism for marine controlled source electromagnetic transmitter

NASA Astrophysics Data System (ADS)

Wang, Meng; Deng, Ming; Luo, Xianhu; Zhao, Qingxian; Chen, Kai; Jing, Jianen

2018-02-01

The marine controlled source electromagnetic (CSEM) method has been recognized as an effective exploration method of shallow hydrocarbons around the world. We developed our own underwater marine CSEM transmitter that consisted of many functional modules with various response times. We previously adopted a centralized software-control technology to design the transmitter circuit topological structure. That structure probably generated a control disorder or malfunction. These undesirable conditions could lead to repeated recovery and deployment of the transmitter, which not only consumed time but also affected data continuity and establishment of stable and continuous CSEM field. We developed an instrument design concept named ‘control technology of hardware parallelism’. In this design, a noteworthy innovation of our new technology is to solve the above-mentioned problems at the physical and fundamental levels. We used several self-contained control-units to simultaneously accomplish the predetermined functions of the transmitter. The new solution relies on two technologies: multi-core embedded technology and multi-channel parallel optical-fiber data transmission technology. The first technology depends on many independent microcontrollers. Every microcontroller is only used to achieve a customized function. The second one relies on several multiple optical-fiber transmission channels realized by a complex programmable logic device and two optical-fiber conversion devices, which are used to establish a communication link between the shipboard monitoring and control-unit and underwater transmitter. We have conducted some marine experiments to verify the reliability and stability of the new method. In particular, the new technology used in the transmitter system could help us obtain more useful measured data in a limited time, improve real-time efficiency, and support the establishment of a stable CSEM field.

Liquid-cooling technology for gas turbines - Review and status

NASA Technical Reports Server (NTRS)

Van Fossen, G. J., Jr.; Stepka, F. S.

1978-01-01

After a brief review of past efforts involving the forced-convection cooling of gas turbines, the paper surveys the state of the art of the liquid cooling of gas turbines. Emphasis is placed on thermosyphon methods of cooling, including those utilizing closed, open, and closed-loop thermosyphons; other methods, including sweat, spray and stator cooling, are also discussed. The more significant research efforts, design data, correlations, and analytical methods are mentioned and voids in technology are summarized.

A rapid and cost-effective method for sequencing pooled cDNA clones by using a combination of transposon insertion and Gateway technology.

PubMed

Morozumi, Takeya; Toki, Daisuke; Eguchi-Ogawa, Tomoko; Uenishi, Hirohide

2011-09-01

Large-scale cDNA-sequencing projects require an efficient strategy for mass sequencing. Here we describe a method for sequencing pooled cDNA clones using a combination of transposon insertion and Gateway technology. Our method reduces the number of shotgun clones that are unsuitable for reconstruction of cDNA sequences, and has the advantage of reducing the total costs of the sequencing project.

Construction of an evaluation and selection system of emergency treatment technology based on dynamic fuzzy GRA method for phenol spill

NASA Astrophysics Data System (ADS)

Zhao, Jingjing; Yu, Lean; Li, Lian

2017-05-01

There is often a great deal of complexity, fuzziness and uncertainties of the chemical contingency spills. In order to obtain the optimum emergency disposal technology schemes as soon as the chemical pollution accident occurs, the technique evaluation system was developed based on dynamic fuzzy GRA method, and the feasibility of the proposed methods has been tested by using a emergency phenol spill accidence occurred in highway.

Life Support Catalyst Regeneration Using Ionic Liquids and In Situ Resources

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Karr, Laurel J.; Paley, Mark S.; Donovan, David N.; Kramer, Teersa J.

2016-01-01

Oxygen recovery from metabolic carbon dioxide is an enabling capability for long-duration manned space flight. Complete recovery of oxygen (100%) involves the production of solid carbon. Catalytic approaches for this purpose, such as Bosch technology, have been limited in trade analyses due in part to the mass penalty for high catalyst resupply caused by carbon fouling of the iron or nickel catalyst. In an effort to mitigate this challenge, several technology approaches have been proposed. These approaches have included methods to prolong the life of the catalysts by increasing the total carbon mass loading per mass catalyst, methods for simplified catalyst introduction and removal to limit the resupply container mass, methods of using in situ resources, and methods to regenerate catalyst material. Research and development into these methods is ongoing, but only use of in situ resources and/or complete regeneration of catalyst material has the potential to entirely eliminate the need for resupply. The use of ionic liquids provides an opportunity to combine these methods in a technology approach designed to eliminate the need for resupply of oxygen recovery catalyst. Here we describe the results of an initial feasibility study using ionic liquids and in situ resources for life support catalyst regeneration, we discuss the key challenges with the approach, and we propose future efforts to advance the technology.

Integrated structural control design of large space structures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allen, J.J.; Lauffer, J.P.

1995-01-01

Active control of structures has been under intensive development for the last ten years. Reference 2 reviews much of the identification and control technology for structural control developed during this time. The technology was initially focused on space structure and weapon applications; however, recently the technology is also being directed toward applications in manufacturing and transportation. Much of this technology focused on multiple-input/multiple-output (MIMO) identification and control methodology because many of the applications require a coordinated control involving multiple disturbances and control objectives where multiple actuators and sensors are necessary for high performance. There have been many optimal robust controlmore » methods developed for the design of MIMO robust control laws; however, there appears to be a significant gap between the theoretical development and experimental evaluation of control and identification methods to address structural control applications. Many methods have been developed for MIMO identification and control of structures, such as the Eigensystem Realization Algorithm (ERA), Q-Markov Covariance Equivalent Realization (Q-Markov COVER) for identification; and, Linear Quadratic Gaussian (LQG), Frequency Weighted LQG and H-/ii-synthesis methods for control. Upon implementation, many of the identification and control methods have shown limitations such as the excitation of unmodelled dynamics and sensitivity to system parameter variations. As a result, research on methods which address these problems have been conducted.« less

Using Eye Trackers for Usability Evaluation of Health Information Technology: A Systematic Literature Review

PubMed Central

Yang, Yushi

2015-01-01

Background Eye-tracking technology has been used to measure human cognitive processes and has the potential to improve the usability of health information technology (HIT). However, it is still unclear how the eye-tracking method can be integrated with other traditional usability methodologies to achieve its full potential. Objective The objective of this study was to report on HIT evaluation studies that have used eye-tracker technology, and to envision the potential use of eye-tracking technology in future research. Methods We used four reference databases to initially identify 5248 related papers, which resulted in only 9 articles that met our inclusion criteria. Results Eye-tracking technology was useful in finding usability problems in many ways, but is still in its infancy for HIT usability evaluation. Limited types of HITs have been evaluated by eye trackers, and there has been a lack of evaluation research in natural settings. Conclusions More research should be done in natural settings to discover the real contextual-based usability problems of clinical and mobile HITs using eye-tracking technology with more standardized methodologies and guidance. PMID:27026079

Children as codesigners of new technologies: valuing the imagination to transform what is possible.

PubMed

Druin, Allison

2010-01-01

The technological complexity and richness of a child's environment today is far beyond what any adults today experienced when they were growing up. For example, no adult today knows what it is like to be a four-year-old using his or her first iPhone app or Webkinz account. Therefore, we seek ways to understand what children need in today's new technologies even without ourselves being children. Since 1999, young people ages seven to eleven have been the author's partners in codesigning new educational technologies at the University of Maryland's Human-Computer Interaction Lab. This work has helped inform who children are--what matters to them, what technologies need to be changed, and what needs to be built for the future. This work uses cooperative inquiry, a set of codesign methods that can enable adults and children to share their ideas while minimizing the differences in age and communication styles. This article describes low-tech methods for brainstorming, offering feedback, and supporting creative change in technology prototype designs. Examples of technologies are discussed and insights from children shared.

Membrane technology for the future treatment of paper mill effluents: chances and challenges of further system closure.

PubMed

Simstich, B; Oeller, H-J

2010-01-01

The pressure on the European paper industry to further close its water circuits has increased significantly during the past decade. Since the technologies of the past can no longer meet the requirements of the future, new water treatment methods have become necessary. A constant rise in the interest in membrane technology expressed by the European paper industry confirms that in the future this method will evolve into a key technology for continued water savings. The publication provides an overview of current and future applications of membrane plants in the European paper industry. A range of technologies is briefly presented together with their advantages and drawbacks, and the economic potential of membrane use is discussed. Among other topics, the authors take a look at the utilization of membrane filtration for treating internal circulation water, partial flows containing coating colours, and biologically treated effluents. The technologies addressed include ultrafiltration, nanofiltration and membrane bioreactor technology. Possible recovery and treatment routes for the concentrates produced by the nanofiltration of biologically treated effluents are examined and evaluated.

Investment decisions with the social and environmental impacts of new technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Evans, D.A.C.

1985-01-01

The purpose of this study was to analyze technology assessment from a finance point of view. Specifically, the study investigated the opinions of firms in the chemical, the computer, and the pharmaceutical industries on technology assessment and the practices they currently use. In addition, it examined the effect of these practices on the financial performances of the firms. Results indicated that the accountability of the firm is the primary explanation for (1) the firm's perceived feasibility of assessing the impacts of new technology, and (2) the firm's emphasis of those impacts in its investment decision. Technology assessment was seen asmore » beneficial because it helped to identify areas of financial and market exposure and to stay in legal compliance. The firms indicated a mistrust of the public and the government. The technology assessment methods used confirmed that assessment is performed as a defensive action. Firms establish the relative importance of their impacts based on the punishment they might face for neglecting them (e.g., government penalties). Likewise, the most selected method of identifying impacts (determining whether the technology will meet government regulation) displays defensiveness.« less

AN INTEGRATED PERSPECTIVE ON THE ASSESSMENT OF TECHNOLOGIES: INTEGRATE-HTA.

PubMed

Wahlster, Philip; Brereton, Louise; Burns, Jacob; Hofmann, Björn; Mozygemba, Kati; Oortwijn, Wija; Pfadenhauer, Lisa; Polus, Stephanie; Rehfuess, Eva; Schilling, Imke; van der Wilt, Gert Jan; Gerhardus, Ansgar

2017-01-01

Current health technology assessment (HTA) is not well equipped to assess complex technologies as insufficient attention is being paid to the diversity in patient characteristics and preferences, context, and implementation. Strategies to integrate these and several other aspects, such as ethical considerations, in a comprehensive assessment are missing. The aim of the European research project INTEGRATE-HTA was to develop a model for an integrated HTA of complex technologies. A multi-method, four-stage approach guided the development of the INTEGRATE-HTA Model: (i) definition of the different dimensions of information to be integrated, (ii) literature review of existing methods for integration, (iii) adjustment of concepts and methods for assessing distinct aspects of complex technologies in the frame of an integrated process, and (iv) application of the model in a case study and subsequent revisions. The INTEGRATE-HTA Model consists of five steps, each involving stakeholders: (i) definition of the technology and the objective of the HTA; (ii) development of a logic model to provide a structured overview of the technology and the system in which it is embedded; (iii) evidence assessment on effectiveness, economic, ethical, legal, and socio-cultural aspects, taking variability of participants, context, implementation issues, and their interactions into account; (iv) populating the logic model with the data generated in step 3; (v) structured process of decision-making. The INTEGRATE-HTA Model provides a structured process for integrated HTAs of complex technologies. Stakeholder involvement in all steps is essential as a means of ensuring relevance and meaningful interpretation of the evidence.

Barriers in adopting blended learning in a private university of Pakistan and East Africa: faculty members' perspective.

PubMed

Rizvi, Nusrat Fatima; Gulzar, Saleema; Nicholas, Wachira; Nkoroi, Beatrice

2017-01-01

Education methods have undergone transformation over the centuries. Use of technology is the cornerstone for innovation in teaching methods. Hence, blended learning which includes face to face and online modalities is being increasingly explored as effective method for learning. This pilot study determines the perceptions of faculty members in a private international university on barriers influencing adoption of technology for teaching and learning. A cross-sectional survey was conducted through a self-reported questionnaire using 'survey monkey'. The data was entered and analyzed using Statistical Package for the Social Sciences (SPSS version 20). Frequencies and proportions are reported. Findings indicated that 51.6% faculty members perceived the importance of integration of technology in their teaching. Around 54% of the participants recognized that they do possess the ability and accessibility to integrate information communication technology (ICT) in teaching and learning, but there is a need to hone the basic information technology (IT) skills to initiate technology driven teaching. Findings revealed that 55% faculty members acknowledged the constraint of not getting protective time to develop and deliver technology driven courses. Further, results showed that 45% faculty members perceived that their innovation efforts in terms of teaching as blended learning do not count towards their professional promotion or recognition, as usually priority is given to research over teaching innovation. The findings also indicated that 54.5% participants asserted that university lack mentorship in the field of blended learning. Therefore, study suggests that universities should provide adequate mentorship programmes for the faculty members in enhancing their skills of integrating technology in their teaching.

Using an Evaluability Assessment To Select Methods for Evaluating State Technology Development Programs: The Case of the Georgia Research Alliance.

ERIC Educational Resources Information Center

Youtie, Jan; Bozeman, Barry; Shapira, Philip

1999-01-01

Describes an evaluability assessment of the Georgia Research Alliance (GRA), a technology development program. Presents the steps involved in conducting an evaluability assessment, including development of an understanding of the program and its stakeholders. Analyzes and compares different methods by which the GRA could be evaluated. (SLD)

Laboratory 3.0: Manufacturing Technologies Laboratory Virtualization with a Student-Centred Methodology

ERIC Educational Resources Information Center

Fabregat-Sanjuan, Albert; Pàmies-Vilà, Rosa; Ferrando Piera, Francesc; De la Flor López, Silvia

2017-01-01

This paper presents a blended-learning strategy for improving the teaching method applied in the laboratory subject Manufacturing Technologies. The teaching method has been changed from a predominantly teacher-centred to an active learning system with a student-centred focus and e-learning activities. In face-to-face classes, a game-based learning…

Learning "about" and Learning "through" Technology: An Analysis of Syllabi from Foreign Language Teaching Methods Courses

ERIC Educational Resources Information Center

Angus, Katie B.

2017-01-01

The 2007 Modern Language Association (MLA) report recommended that foreign language (FL) graduate students be provided with "substantive training in language teaching and in the use of new technologies". In the present study, I examined teaching methodology ("methods") course syllabi in order to gauge the extent of professional…

Connecting Generations: Developing Co-Design Methods for Older Adults and Children

ERIC Educational Resources Information Center

Xie, Bo; Druin, Allison; Fails, Jerry; Massey, Sheri; Golub, Evan; Franckel, Sonia; Schneider, Kiki

2012-01-01

As new technologies emerge that can bring older adults together with children, little has been discussed by researchers concerning the design methods used to create these new technologies. Giving both children and older adults a voice in a shared design process comes with many challenges. This paper details an exploratory study focusing on…

A Study of Trial and Error Learning in Technology, Engineering, and Design Education

ERIC Educational Resources Information Center

Franzen, Marissa Marie Sloan

2016-01-01

The purpose of this research study was to determine if trial and error learning was an effective, practical, and efficient learning method for Technology, Engineering, and Design Education students at the post-secondary level. A mixed methods explanatory research design was used to measure the viability of the learning source. The study sample was…

Geothermal Technology: A Smart Way to Lower Energy Bills

ERIC Educational Resources Information Center

Calahan, Scott

2007-01-01

Heating costs for both natural gas and oil have risen dramatically in recent years--and will likely continue to do so. Consequently, it is important that students learn not only about traditional heating technology, but also about the alternative methods that will surely grow in use in the coming years. One such method is geothermal. In this…

Synthesis of engineering designs of drilling facilities

NASA Astrophysics Data System (ADS)

Porozhsky, K.

2018-03-01

The article sets forth key principles of engineering of drilling equipment based on successive analysis of the goals of the production method, technologies of its implementation and conditions of mineral mining using a new approach to systematization of drilling methods. Potential advancement in the technologies and equipment of drilling is illustrated in terms of oil-well drilling.

Relating Engineering Technology Students' Experiences in Electromagnetics with Performance in Communications Coursework: A Mixed-Methods Study

ERIC Educational Resources Information Center

Richards, Grant P.

2009-01-01

This study presents the results of a multi-year mixed-methods study of students' performance (n = 94) and experiences (n = 28) with electromagnetics in an elective Electrical and Computer Engineering Technology RF communications course. Data sources used in this study include academic transcripts, course exams, interviews, a learning styles…

Statistics on Science and Technology in Latin America, Experience with UNESCO Pilot Projects, 1972-1974.

ERIC Educational Resources Information Center

Thebaud, Schiller

This report examines four UNESCO pilot projects undertaken in 1972 in Brazil, Colombia, Peru, and Uruguay to study the methods used for national statistical surveys of science and technology. The projects specifically addressed the problems of comparing statistics gathered by different methods in different countries. Surveys carried out in Latin…

A Study on the Methods of Assessment and Strategy of Knowledge Sharing in Computer Course

ERIC Educational Resources Information Center

Chan, Pat P. W.

2014-01-01

With the advancement of information and communication technology, collaboration and knowledge sharing through technology is facilitated which enhances the learning process and improves the learning efficiency. The purpose of this paper is to review the methods of assessment and strategy of collaboration and knowledge sharing in a computer course,…

The Use of Collaboration, Authentic Learning, Linking Material to Personal Knowledge, and Technology in the Constructivist Classroom: Interviews with Community College Faculty Members

ERIC Educational Resources Information Center

Zielinski, Dianne E.

2017-01-01

This study explored how faculty members implemented constructivist teaching methods after training. The student-centered teaching methods were interactions and collaborations, authentic learning and real-world experiences, linking material to previously learned information, and using technology in the classroom. Seven faculty members trained in…

Using Citation Analysis Methods to Assess the Influence of Science, Technology, Engineering, and Mathematics Education Evaluations

ERIC Educational Resources Information Center

Greenseid, Lija O.; Lawrenz, Frances

2011-01-01

This study explores the use of citation analysis methods to assess the influence of program evaluations conducted within the area of science, technology, engineering, and mathematics (STEM) education. Citation analysis is widely used within scientific research communities to measure the relative influence of scientific research enterprises and/or…

Manufacturing Methods and Technology (MMT) project execution report

NASA Astrophysics Data System (ADS)

Swim, P. A.

1982-10-01

This document is a summary compilation of the manufacturing methods and technology program project status reports (RCS DRCMT-301) submitted to IBEA from DARCOM major Army subcommands and project managers. Each page of the computerized section lists project number, title, status, funding, and projected completion date. Summary pages give information relating to the overall DARCOM program.

Science Teacher Education in the Twenty-First Century: A Pedagogical Framework for Technology-Integrated Social Constructivism

ERIC Educational Resources Information Center

Barak, Miri

2017-01-01

Changes in our global world have shifted the skill demands from acquisition of structured knowledge to mastery of skills, often referred to as twenty-first century competencies. Given these changes, a sequential explanatory mixed methods study was undertaken to (a) examine predominant instructional methods and technologies used by teacher…

Design in Context: A Conceptual Framework for the Study of Computer Software in Higher Education.

ERIC Educational Resources Information Center

Kozma, Robert B.; Bangert-Drowns, Robert L.

The conceptual groundwork needed to examine the impact of technology, primarily microcomputers, on student learning is presented. Medium, method, and context are tied with a science of design. In section I, research on technology in higher education is reviewed, medium and method are defined, and interaction with context is discussed. Taxonomies…

Achievement Motivations of the Students Studying at Computer and Instructional Technologies Teaching Department

ERIC Educational Resources Information Center

Semerci, Cetin; Duman, Burcu

2013-01-01

The aim of this research is to determine achievement motivations of the students studying at Computer and Instructional Technologies Teaching (CITT) Department. In this research, survey method is used. In the frame of this method, the existing situation about the achievement motivations of CITT students in Yuzuncu Yil and Firat Universities in…

Technologies Used in the Study of Advanced Mathematics by Students Who Are Visually Impaired in Classrooms: Teachers' Perspectives

ERIC Educational Resources Information Center

DePountis, Vicki M.; Pogrund, Rona L.; Griffin-Shirley, Nora; Lan, William Y.

2015-01-01

Introduction: This research examined the perspectives of teachers of students who are visually impaired regarding the use and effectiveness of high-tech assistive technology purported to assist visually impaired students in advanced mathematics. Methods: The data for this study were collected via a mixed-methods online survey distributed through…

A Case Study of Enabling Factors in the Technology Integration Change Process

ERIC Educational Resources Information Center

Hsu, Pi-Sui; Sharma, Priya

2008-01-01

The purpose of this qualitative case study was to analyze enabling factors in the technology integration change process in a multi-section science methods course, SCIED 408 (pseudonym), from 1997 to 2003 at a large northeastern university in the United States. We used two major data collection methods, in-depth interviewing and document reviews.…

Examining Current Beliefs, Practices and Barriers about Technology Integration: A Case Study

ERIC Educational Resources Information Center

Hsu, Pi-Sui

2016-01-01

The purpose of this mixed-methods study was to examine the current beliefs, practices and barriers concerning technology integration of Kindergarten through Grade Six teachers in the midwestern United States. The three data collection methods were online surveys with 152 teachers as well as interviews and observations with 8 teachers. The findings…

An Analysis of Social, Literary and Technological Sources Used by Classroom Teachers in Social Studies Courses

ERIC Educational Resources Information Center

Fidan, Nuray Kurtdede; Ergün, Mustafa

2016-01-01

In this study, social, literary and technological sources used by classroom teachers in social studies courses are analyzed in terms of frequency. The study employs mixed methods research and is designed following the convergent parallel design. In the qualitative part of the study, phenomenological method was used and in the quantitative…

[Discussion on appraisal methods and key technologies of arbuscular mycorrhizal fungi and medicinal plant symbiosis system].

PubMed

Chen, Meilan; Guo, Lanping; Yang, Guang; Chen, Min; Yang, Li; Huang, Luqi

2011-11-01

Applications of arbuscular mycorrhizal fungi in research of medicinal plant cultivation are increased in recent years. Medicinal plants habitat is complicated and many inclusions are in root, however crop habitat is simple and few inclusions in root. So appraisal methods and key technologies about the symbiotic system of crop and arbuscular mycorrhizal fungi can't completely suitable for the symbiotic system of medicinal plants and arbuscular mycorrhizal fungi. This article discuss the appraisal methods and key technologies about the symbiotic system of medicinal plant and arbuscular mycorrhizal fungi from the isolation and identification of arbuscular mycorrhiza, and the appraisal of colonization intensity. This article provides guidance for application research of arbuscular mycorrhizal fungi in cultivation of medicinal plants.

The Effectiveness of Educational Technology Applications for Enhancing Mathematics Achievement in K-12 Classrooms: A Meta-Analysis. Educator's Summary

ERIC Educational Resources Information Center

Center for Research and Reform in Education, 2012

2012-01-01

This review summarizes research on the effects of technology use on mathematics achievement in K-12 classrooms. The main research questions included: (1) Do education technology applications improve mathematics achievement in K-12 classrooms as compared to traditional teaching methods without education technology?; and (2) What study and research…

Condition Based Maintenance Technology Impact Study: Assessment Methods, Study Design and Interim Results

DTIC Science & Technology

2014-07-01

Unified Theory of Acceptance and Use of Technology, Structuration Model of Technology, UNCLASSIFIED DSTO-TR-2992 UNCLASSIFIED 5 Adaptive...Structuration Theory , Model of Mutual Adaptation, Model of Technology Appropriation, Diffusion/Implementation Model, and Tri-core Model, among others [11...simulation gaming essay/scenario writing genius forecasting role play/acting backcasting swot brainstorming relevance tree/logic chart scenario workshop

APA Summit on Medical Student Education Task Force on Informatics and Technology: Learning about Computers and Applying Computer Technology to Education and Practice

ERIC Educational Resources Information Center

Hilty, Donald M.; Hales, Deborah J.; Briscoe, Greg; Benjamin, Sheldon; Boland, Robert J.; Luo, John S.; Chan, Carlyle H.; Kennedy, Robert S.; Karlinsky, Harry; Gordon, Daniel B.; Yager, Joel; Yellowlees, Peter M.

2006-01-01

Objective: This article provides a brief overview of important issues for educators regarding medical education and technology. Methods: The literature describes key concepts, prototypical technology tools, and model programs. A work group of psychiatric educators was convened three times by phone conference to discuss the literature. Findings…

Beyond the Book: Technology Integration into the Secondary School Library Media Curriculum. Library and Information Problem-Solving Skills Series.

ERIC Educational Resources Information Center

Doggett, Sandra L.

After exploring the pros and cons of using various technologies in secondary schools, as well as the development of an Acceptable Use Policy, this book describes how technology affects the role and interaction of media specialists, teachers, students, administrators, and parents. Technology planning tips are given on methods to research trends,…

A Mixed-Methods Examination of Influences on the Shape and Malleability of Technological Pedagogical Content Knowledge (TPACK) in Graduate Teacher Education Students

ERIC Educational Resources Information Center

Sabo, Kent

2013-01-01

Concerted efforts have been made within teacher preparation programs to integrate teaching with technology into the curriculum. Unfortunately, these efforts continue to fall short as teachers' application of educational technology is unsophisticated and not well integrated. The most prevalent approaches to integrating technology tend to ignore…

Technology assessment of solar energy utilization

NASA Astrophysics Data System (ADS)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

STEM learning on electricity using arduino-phet based experiment to improve 8th grade students’ STEM literacy

NASA Astrophysics Data System (ADS)

Prima, E. C.; Oktaviani, T. D.; Sholihin, H.

2018-05-01

Technology is the application of scientific knowledge for practical purposes, especially in industry. One way to support the development of the technology is by integrating the use of technology and build the technology with the learning process in the form of STEM (science, technology, engineering, mathematics) Learning approach. Applying STEM Learning could improve Students’ STEM Literacy. The learning approach is applied in every aspect of Learning including the application of STEM Learning in the lesson plan and worksheet. The method used in this research is weak experimental method. One group class (N=15) is taken and learn using STEM Learning approach. The topic choosen is the electricity topic which is separated into electrical circuit and parameters. The learning process is separated into 3 meetings. 15 Students are given a STEM Literacy test item before and after the lesson. The result of the normalized gain shows there are improvement in students’ STEM Literacy by < \\overline{g}> 0.16 categorieed as low improvement. The most higher improvement is the students’ technology literacy, because students learn using the same technology in every meeting. This factor influences students’ technology literacy so the result is higher than another.

The advanced progress of precoding technology in 5g system

NASA Astrophysics Data System (ADS)

An, Chenyi

2017-09-01

With the development of technology, people began to put forward higher requirements for the mobile system, the emergence of the 5G subvert the track of the development of mobile communication technology. In the research of the core technology of 5G mobile communication, large scale MIMO, and precoding technology is a research hotspot. At present, the research on precoding technology in 5G system analyzes the various methods of linear precoding, the maximum ratio transmission (MRT) precoding algorithm, zero forcing (ZF) precoding algorithm, minimum mean square error (MMSE) precoding algorithm based on maximum signal to leakage and noise ratio (SLNR). Precoding algorithms are analyzed and summarized in detail. At the same time, we also do some research on nonlinear precoding methods, such as dirty paper precoding, THP precoding algorithm and so on. Through these analysis, we can find the advantages and disadvantages of each algorithm, as well as the development trend of each algorithm, grasp the development of the current 5G system precoding technology. Therefore, the research results and data of this paper can be used as reference for the development of precoding technology in 5G system.

Using Technology in Pre-School Education

ERIC Educational Resources Information Center

Can-Yasar, Munevver; Inal, Gozde; Uyanik, Ozgun; Kandir, Adalet

2012-01-01

Technology is the collection of machines, processes, methods, transactions, systems, administration and supervision mechanism, which serves as a bridge between science and practice and helps meet human needs using available information, materials, sources and energy. The developments in technology and educational aims follow a parallelism, which…

Generic Verification Protocol for Testing Pesticide Application Spray Drift Reduction Technologies for Row and Field Crops

EPA Pesticide Factsheets

This generic verification protocol provides a detailed method to conduct and report results from a verification test of pesticide application technologies that can be used to evaluate these technologies for their potential to reduce spray drift.

SITE TECHNOLOGY PROFILES, TENTH EDITION, VOLUME 2 - EMERGING TECHNOLOGY PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program, now in its thirteenth year, is an integral part of EPA's research into alternative cleanup methods for hazardous waste sites around the nation. The SITE Program was created to encourage the development and routine us...

Applications in Educational Assessment: Future Technologies.

ERIC Educational Resources Information Center

Bank Street Coll. of Education, New York, NY. Center for Children and Technology.

The development of improved and alternative methods of educational assessment should take advantage of technologies that enable different aspects of learning, teaching, and student achievement to be part of an improved assessment system. The current understanding of knowledge assessment, new approaches to assessment, and technologies that may…

Evaluation of Traditional and Technology-Based Grocery Store Nutrition Education

ERIC Educational Resources Information Center

Schultz, Jennifer; Litchfield, Ruth

2016-01-01

Background: A literature gap exists for grocery interventions with realistic resource expectations; few technology-based publications exist, and none document traditional comparison. Purpose: Compare grocery store traditional aisle demonstrations (AD) and technology-based (TB) nutrition education treatments. Methods: A quasi-experimental 4-month…

May I Cut in? Gene Editing Approaches in Human Induced Pluripotent Stem Cells.

PubMed

Brookhouser, Nicholas; Raman, Sreedevi; Potts, Christopher; Brafman, David A

2017-02-06

In the decade since Yamanaka and colleagues described methods to reprogram somatic cells into a pluripotent state, human induced pluripotent stem cells (hiPSCs) have demonstrated tremendous promise in numerous disease modeling, drug discovery, and regenerative medicine applications. More recently, the development and refinement of advanced gene transduction and editing technologies have further accelerated the potential of hiPSCs. In this review, we discuss the various gene editing technologies that are being implemented with hiPSCs. Specifically, we describe the emergence of technologies including zinc-finger nuclease (ZFN), transcription activator-like effector nuclease (TALEN), and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 that can be used to edit the genome at precise locations, and discuss the strengths and weaknesses of each of these technologies. In addition, we present the current applications of these technologies in elucidating the mechanisms of human development and disease, developing novel and effective therapeutic molecules, and engineering cell-based therapies. Finally, we discuss the emerging technological advances in targeted gene editing methods.

Civil propulsion technology for the next twenty-five years

NASA Technical Reports Server (NTRS)

Rosen, Robert; Facey, John R.

1987-01-01

The next twenty-five years will see major advances in civil propulsion technology that will result in completely new aircraft systems for domestic, international, commuter and high-speed transports. These aircraft will include advanced aerodynamic, structural, and avionic technologies resulting in major new system capabilities and economic improvements. Propulsion technologies will include high-speed turboprops in the near term, very high bypass ratio turbofans, high efficiency small engines and advanced cycles utilizing high temperature materials for high-speed propulsion. Key fundamental enabling technologies include increased temperature capability and advanced design methods. Increased temperature capability will be based on improved composite materials such as metal matrix, intermetallics, ceramics, and carbon/carbon as well as advanced heat transfer techniques. Advanced design methods will make use of advances in internal computational fluid mechanics, reacting flow computation, computational structural mechanics and computational chemistry. The combination of advanced enabling technologies, new propulsion concepts and advanced control approaches will provide major improvements in civil aircraft.

Effect of Hurdle Technology in Food Preservation: A Review.

PubMed

Singh, Shiv; Shalini, Rachana

2016-01-01

Hurdle technology is used in industrialized as well as in developing countries for the gentle but effective preservation of foods. Hurdle technology was developed several years ago as a new concept for the production of safe, stable, nutritious, tasty, and economical foods. Previously hurdle technology, i.e., a combination of preservation methods, was used empirically without much knowledge of the governing principles. The intelligent application of hurdle technology has become more prevalent now, because the principles of major preservative factors for foods (e.g., temperature, pH, aw, Eh, competitive flora), and their interactions, became better known. Recently, the influence of food preservation methods on the physiology and behavior of microorganisms in foods, i.e. their homeostasis, metabolic exhaustion, stress reactions, are taken into account, and the novel concept of multi-target food preservation emerged. The present contribution reviews the concept of the potential hurdles for foods, the hurdle effect, and the hurdle technology for the prospects of the future goal of a multi-target preservation of foods.

May I Cut in? Gene Editing Approaches in Human Induced Pluripotent Stem Cells

PubMed Central

Brookhouser, Nicholas; Raman, Sreedevi; Potts, Christopher; Brafman, David. A.

2017-01-01

In the decade since Yamanaka and colleagues described methods to reprogram somatic cells into a pluripotent state, human induced pluripotent stem cells (hiPSCs) have demonstrated tremendous promise in numerous disease modeling, drug discovery, and regenerative medicine applications. More recently, the development and refinement of advanced gene transduction and editing technologies have further accelerated the potential of hiPSCs. In this review, we discuss the various gene editing technologies that are being implemented with hiPSCs. Specifically, we describe the emergence of technologies including zinc-finger nuclease (ZFN), transcription activator-like effector nuclease (TALEN), and clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9 that can be used to edit the genome at precise locations, and discuss the strengths and weaknesses of each of these technologies. In addition, we present the current applications of these technologies in elucidating the mechanisms of human development and disease, developing novel and effective therapeutic molecules, and engineering cell-based therapies. Finally, we discuss the emerging technological advances in targeted gene editing methods. PMID:28178187

A study of the river velocity measurement techniques and analysis methods

NASA Astrophysics Data System (ADS)

Chung Yang, Han; Lun Chiang, Jie

2013-04-01

Velocity measurement technology can be traced back to the pitot tube velocity measurement method in the 18th century and today's velocity measurement technology use the acoustic and radar technology, with the Doppler principle developed technology advances, in order to develop the measurement method is more suitable for the measurement of velocity, the purpose is to get a more accurate measurement data and with the surface velocity theory, the maximum velocity theory and the indicator theory to obtain the mean velocity. As the main research direction of this article is to review the literature of the velocity measurement techniques and analysis methods, and to explore the applicability of the measurement method of the velocity measurement instruments, and then to describe the advantages and disadvantages of the different mean velocity profiles analysis method. Adequate review of the references of this study will be able to provide a reference for follow-up study of the velocity measurement. Review velocity measurement literature that different velocity measurement is required to follow the different flow conditions measured be upgraded its accuracy, because each flow rate measurement method has its advantages and disadvantages. Traditional velocity instrument can be used at low flow and RiverRAD microwave radar or imaging technology measurement method may be applied in high flow. In the tidal river can use the ADCP to quickly measure river vertical velocity distribution. In addition, urban rivers may be used the CW radar to set up on the bridge, and wide rivers can be used RiverRAD microwave radar to measure the velocities. Review the relevant literature also found that using Ultrasonic Doppler Current Profiler with the Chiu's theory to the velocity of observing automation work can save manpower and resources to improve measurement accuracy, reduce the risk of measurement, but the great variability of river characteristics in Taiwan and a lot of drifting floating objects in water in high flow, resulting in measurement automation work still needs further study. If the priority for the safety of personnel and instruments, we can use the non-contact velocity measurement method with the theoretical analysis method to achieve real-time monitoring.

Synthese de champs sonores adaptative

NASA Astrophysics Data System (ADS)

Gauthier, Philippe-Aubert

La reproduction de champs acoustiques est une approche physique au probleme technologique de la spatialisation sonore. Cette these concerne l'aspect physique de la reproduction de champs acoustiques. L'objectif principal est l'amelioration de la reproduction de champs acoustiques par "synthese de champs acoustiques" ("Wave Field Synthesis", WFS), une approche connue, basee sur des hypotheses de champ libre, a l'aide du controle actif par l'ajout de capteurs de l'erreur de reproduction et d'une boucle fermee. Un premier chapitre technique (chapitre 4) expose les resultats d'appreciation objective de la WFS par simulations et mesures experimentales. L'effet indesirable de la salle de reproduction sur les qualites objectives de la WFS fut illustre. Une premiere question de recherche fut ensuite abordee (chapitre 5), a savoir s'il est possible de reproduire des champs progressifs en salle dans un paradigme physique de controle actif: cette possibilite fut prouvee. L'approche technique privilegiee, "synthese de champs adaptative" ("Adaptive Wave Field Synthesis" [AWFS]), fut definie, puis simulee (chapitre 6). Cette approche d'AWFS comporte une originalite en controle actif et en reproduction de champs acoustiques: la fonction cout quadratique representant la minimisation des erreurs de reproduction inclut une regularisation de Tikhonov avec solution a priori qui vient de la WFS. L'etude de l'AWFS a l'aide de la decomposition en valeurs singulieres (chapitre 7) a permis de comprendre les mecanismes propres a l'AWFS. C'est la deuxieme principale originalite de la these. L'algorithme FXLMS (LMS et reference filtree) est modifie pour l'AWFS (chapitre 8). Le decouplage du systeme par decomposition en valeurs singulieres est illustre dans le domaine du traitement de signal et l'AWFS basee sur le controle independant des modes de rayonnement est simulee (chapitre 8). Ce qui constitue la troisieme originalite principale de cette these. Ces simulations du traitement de signal montrent l'efficacite des algorithmes et la capacite de l'AWFS a attenuer les erreurs attribuables a des reflexions acoustiques. Le neuvieme chapitre presente des resultats experimentaux d'AWFS. L'objectif etait de valider la methode et d'evaluer les performances de l'AWFS. Un autre algorithme prometteur est aussi teste. Les resultats demontrent la bonne marche de l'AWFS et des algorithmes testes. Autant dans le cas de la reproduction de champs harmoniques que dans le cas de la reproduction de champs a large bande, l'AWFS reduit l'erreur de reproduction de la WFS et les effets indesirables causes par les lieux de reproduction.

Use of technology in children’s dietary assessment

PubMed Central

Boushey, CJ; Kerr, DA; Wright, J; Lutes, KD; Ebert, DS; Delp, EJ

2010-01-01

Background Information on dietary intake provides some of the most valuable insights for mounting intervention programmes for the prevention of chronic diseases. With the growing concern about adolescent overweight, the need to accurately measure diet becomes imperative. Assessment among adolescents is problematic as this group has irregular eating patterns and they have less enthusiasm for recording food intake. Subjects/Methods We used qualitative and quantitative techniques among adolescents to assess their preferences for dietary assessment methods. Results Dietary assessment methods using technology, for example, a personal digital assistant (PDA) or a disposable camera, were preferred over the pen and paper food record. Conclusions There was a strong preference for using methods that incorporate technology such as capturing images of food. This suggests that for adolescents, dietary methods that incorporate technology may improve cooperation and accuracy. Current computing technology includes higher resolution images, improved memory capacity and faster processors that allow small mobile devices to process information not previously possible. Our goal is to develop, implement and evaluate a mobile device (for example, PDA, mobile phone) food record that will translate to an accurate account of daily food and nutrient intake among adolescents. This mobile computing device will include digital images, a nutrient database and image analysis for identification and quantification of food consumption. Mobile computing devices provide a unique vehicle for collecting dietary information that reduces the burden on record keepers. Images of food can be marked with a variety of input methods that link the item for image processing and analysis to estimate the amount of food. Images before and after the foods are eaten can estimate the amount of food consumed. The initial stages and potential of this project will be described. PMID:19190645

Review of potential subsurface permeable barrier emplacement and monitoring technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riggsbee, W.H.; Treat, R.L.; Stansfield, H.J.

1994-02-01

This report focuses on subsurface permeable barrier technologies potentially applicable to existing waste disposal sites. This report describes candidate subsurface permeable barriers, methods for emplacing these barriers, and methods used to monitor the barrier performance. Two types of subsurface barrier systems are described: those that apply to contamination.in the unsaturated zone, and those that apply to groundwater and to mobile contamination near the groundwater table. These barriers may be emplaced either horizontally or vertically depending on waste and site characteristics. Materials for creating permeable subsurface barriers are emplaced using one of three basic methods: injection, in situ mechanical mixing, ormore » excavation-insertion. Injection is the emplacement of dissolved reagents or colloidal suspensions into the soil at elevated pressures. In situ mechanical mixing is the physical blending of the soil and the barrier material underground. Excavation-insertion is the removal of a soil volume and adding barrier materials to the space created. Major vertical barrier emplacement technologies include trenching-backfilling; slurry trenching; and vertical drilling and injection, including boring (earth augering), cable tool drilling, rotary drilling, sonic drilling, jetting methods, injection-mixing in drilled holes, and deep soil mixing. Major horizontal barrier emplacement technologies include horizontal drilling, microtunneling, compaction boring, horizontal emplacement, longwall mining, hydraulic fracturing, and jetting methods.« less

Analysis and evaluation of the applicability of green energy technology

NASA Astrophysics Data System (ADS)

Xu, Z. J.; Song, Y. K.

2017-11-01

With the seriousness of environmental issues and the shortage of resources, the applicability of green energy technology has been paid more and more attention by scholars in different fields. However, the current researches are often single in perspective and simple in method. According to the Theory of Applicable Technology, this paper analyzes and defines the green energy technology and its applicability from the all-around perspectives of symbiosis of economy, society, environment and science & technology etc., and correspondingly constructs the evaluation index system. The paper further applies the Fuzzy Comprehensive Evaluation to the evaluation of its applicability, discusses in depth the evaluation models and methods, and explains in detail with an example. The author holds that the applicability of green energy technology involves many aspects of economy, society, environment and science & technology and can be evaluated comprehensively by an index system composed of a number of independent indexes. The evaluation is multi-object, multi-factor, multi-level and fuzzy comprehensive, which is undoubtedly correct, effective and feasible by the Fuzzy Comprehensive Evaluation. It is of vital theoretical and practical significance to understand and evaluate comprehensively the applicability of green energy technology for the rational development and utilization of green energy technology and for the better promotion of sustainable development of human and nature.

Methods for Prediction of High-Speed Reacting Flows in Aerospace Propulsion

NASA Technical Reports Server (NTRS)

Drummond, J. Philip

2014-01-01

Research to develop high-speed airbreathing aerospace propulsion systems was underway in the late 1950s. A major part of the effort involved the supersonic combustion ramjet, or scramjet, engine. Work had also begun to develop computational techniques for solving the equations governing the flow through a scramjet engine. However, scramjet technology and the computational methods to assist in its evolution would remain apart for another decade. The principal barrier was that the computational methods needed for engine evolution lacked the computer technology required for solving the discrete equations resulting from the numerical methods. Even today, computer resources remain a major pacing item in overcoming this barrier. Significant advances have been made over the past 35 years, however, in modeling the supersonic chemically reacting flow in a scramjet combustor. To see how scramjet development and the required computational tools finally merged, we briefly trace the evolution of the technology in both areas.

Fingerprinting of music scores

NASA Astrophysics Data System (ADS)

Irons, Jonathan; Schmucker, Martin

2004-06-01

Publishers of sheet music are generally reluctant in distributing their content via the Internet. Although online sheet music distribution's advantages are numerous the potential risk of Intellectual Property Rights (IPR) infringement, e.g. illegal online distributions, disables any innovation propensity. While active protection techniques only deter external risk factors, additional technology is necessary to adequately treat further risk factors. For several media types including music scores watermarking technology has been developed, which ebeds information in data by suitable data modifications. Furthermore, fingerprinting or perceptual hasing methods have been developed and are being applied especially for audio. These methods allow the identification of content without prior modifications. In this article we motivate the development of watermarking and fingerprinting technologies for sheet music. Outgoing from potential limitations of watermarking methods we explain why fingerprinting methods are important for sheet music and address potential applications. Finally we introduce a condept for fingerprinting of sheet music.

A Review of NICE Methods and Processes Across Health Technology Assessment Programmes: Why the Differences and What is the Impact?

PubMed

Cowles, Emma; Marsden, Grace; Cole, Amanda; Devlin, Nancy

2017-08-01

Decisions made by the National Institute for Health and Care Excellence (NICE) exert an influence on the allocation of resources within 'fixed' National Health Service budgets. Yet guidance for different types of health interventions is handled via different 'programmes' within NICE, which follow different methods and processes. The objective of this research was to identify differences in the processes and methods of NICE health technology assessment programmes and to explore how these could impact on allocative efficiency within the National Health Service. Data were extracted from the NICE technology appraisal programme, medical technologies guidance, diagnostic assessment programme, highly specialised technologies programme, and clinical guidelines process and methods manuals to undertake a systematic comparison. Five qualitative interviews were carried out with NICE members of staff and committee members to explore the reasons for the differences found. The main differences identified were in the required evidence review period, or lack thereof, mandatory funding status, the provision of a reference case for economic evaluation, the requirement for and the type of economic analysis undertaken, and the decision making criteria used for appraisal. Many of the differences found can be justified on grounds of practicality and relevance to the health technologies under assessment. Nevertheless, from a strict utilitarian view, there are several potential areas of inefficiency that could lead to the misallocation of resources within the National Health Service, although some of these might be eliminated or reduced if an egalitarian view is taken. The challenge is determining where society is willing to trade health gains between different people.

Studies Involving People With Dementia and Touchscreen Technology: A Literature Review

PubMed Central

Astell, Arlene J

2016-01-01

Background Devices using touchscreen interfaces such as tablets and smartphones have been highlighted as potentially suitable for people with dementia due to their intuitive and simple control method. This population experience a lack of meaningful, engaging activities, yet the potential use of the touchscreen format to address this issue has not been fully realized. Objective To identify and synthesize the existing body of literature involving the use of touchscreen technology and people with dementia in order to guide future research in this area. Methods A systematized review of studies in the English language was conducted, where a touchscreen interface was used with human participants with dementia. Results A total of 45 articles met the inclusion criteria. Four questions were addressed concerning (1) the context of use, (2) reasons behind the selection of the technology, (3) details of the hardware and software, and (4) whether independent use by people with dementia was evidenced. Conclusions This review presents an emerging body of evidence demonstrating that people with dementia are able to independently use touchscreen technology. The intuitive control method and adaptability of modern devices has driven the selection of this technology in studies. However, its primary use to date has been as a method to deliver assessments and screening tests or to provide an assistive function or cognitive rehabilitation. Building on the finding that people with dementia are able to use touchscreen technology and which design features facilitate this, more use could be made to deliver independent activities for meaningful occupation, entertainment, and fun. PMID:28582254

Use of Multimedia Technology in the Doctor-Patient Relationship for Obtaining Patient Informed Consent

PubMed Central

Michalski, Andrzej; Stopa, Marcin; Miśkowiak, Bogdan

2016-01-01

Patient informed consent for surgery or for high-risk methods of treatment or diagnosis means that unlawful breach of the patient’s personal interests is avoided and the patient accepts the risk of surgery and takes the brunt of it. Patient awareness – their knowledge of the condition and circumstances of continued therapeutic procedure, including offered and available methods of treatment and their possible complications – constitutes a particular aspect of the informed-consent process. The rapid development of technologies and methods of treatment may cause communication problems between the doctor and the patient regarding the scope and method of patient education prior to surgery. The use of multimedia technology (e.g., videos of surgical procedures, computer animation, and graphics), in addition to media used in preoperative patient education, may be a factor in improving the quality of the informed consent process. Studies conducted in clinical centers show that with use of multimedia technology, patients remember more of the information presented. The use of new technology also makes it possible to reduce the difference in the amount of information assimilated by patients with different levels of education. The use of media is a way to improve the quality of preoperative patient education and, at the same time, a step towards their further empowerment in the healing process. PMID:27780964

Technology-based self-care methods of improving antiretroviral adherence: a systematic review.

PubMed

Saberi, Parya; Johnson, Mallory O

2011-01-01

As HIV infection has shifted to a chronic condition, self-care practices have emerged as an important topic for HIV-positive individuals in maintaining an optimal level of health. Self-care refers to activities that patients undertake to maintain and improve health, such as strategies to achieve and maintain high levels of antiretroviral adherence. Technology-based methods are increasingly used to enhance antiretroviral adherence; therefore, we systematically reviewed the literature to examine technology-based self-care methods that HIV-positive individuals utilize to improve adherence. Seven electronic databases were searched from 1/1/1980 through 12/31/2010. We included quantitative and qualitative studies. Among quantitative studies, the primary outcomes included ARV adherence, viral load, and CD4+ cell count and secondary outcomes consisted of quality of life, adverse effects, and feasibility/acceptability data. For qualitative/descriptive studies, interview themes, reports of use, and perceptions of use were summarized. Thirty-six publications were included (24 quantitative and 12 qualitative/descriptive). Studies with exclusive utilization of medication reminder devices demonstrated less evidence of enhancing adherence in comparison to multi-component methods. This systematic review offers support for self-care technology-based approaches that may result in improved antiretroviral adherence. There was a clear pattern of results that favored individually-tailored, multi-function technologies, which allowed for periodic communication with health care providers rather than sole reliance on electronic reminder devices.

Optimization of CMOS image sensor utilizing variable temporal multisampling partial transfer technique to achieve full-frame high dynamic range with superior low light and stop motion capability

NASA Astrophysics Data System (ADS)

Kabir, Salman; Smith, Craig; Armstrong, Frank; Barnard, Gerrit; Schneider, Alex; Guidash, Michael; Vogelsang, Thomas; Endsley, Jay

2018-03-01

Differential binary pixel technology is a threshold-based timing, readout, and image reconstruction method that utilizes the subframe partial charge transfer technique in a standard four-transistor (4T) pixel CMOS image sensor to achieve a high dynamic range video with stop motion. This technology improves low light signal-to-noise ratio (SNR) by up to 21 dB. The method is verified in silicon using a Taiwan Semiconductor Manufacturing Company's 65 nm 1.1 μm pixel technology 1 megapixel test chip array and is compared with a traditional 4 × oversampling technique using full charge transfer to show low light SNR superiority of the presented technology.

[Research and application of computer-aided technology in restoration of maxillary defect].

PubMed

Cheng, Xiaosheng; Liao, Wenhe; Hu, Qingang; Wang, Qian; Dai, Ning

2008-08-01

This paper presents a new method of designing restoration model of maxillectomy defect through Computer aided technology. Firstly, 3D maxillectomy triangle mesh model is constructed from Helical CT data. Secondly, the triangle mesh model is transformed into initial computer-aided design (CAD) model of maxillectomy through reverse engineering software. Thirdly, the 3D virtual restoration model of maxillary defect is obtained after designing and adjusting the initial CAD model through CAD software according to the patient's practical condition. Therefore, the 3D virtual restoration can be fitted very well with the broken part of maxilla. The exported design data can be manufactured using rapid prototyping technology and foundry technology. Finally, the result proved that this method is effective and feasible.

Time Series Analysis of Technology Trends based on the Internet Resources

NASA Astrophysics Data System (ADS)

Kobayashi, Shin-Ichi; Shirai, Yasuyuki; Hiyane, Kazuo; Kumeno, Fumihiro; Inujima, Hiroshi; Yamauchi, Noriyoshi

Information technology is increasingly important in recent years for the development of our society. IT has brought many changes to everything in our society with incredible speed. Hence, when we investigate R & D themes or plan business strategies in IT, we must understand overall situation around the target technology area besides technology itself. Especially it is crucial to understand overall situation as time series to know what will happen in the near future in the target area. For this purpose, we developed a method to generate Multiple-phased trend maps automatically based on the Internet content. Furthermore, we introduced quantitative indicators to analyze near future possible changes. According to the evaluation of this method we got successful and interesting results.

Reconstructed imaging of acoustic cloak using time-lapse reversal method

NASA Astrophysics Data System (ADS)

Zhou, Chen; Cheng, Ying; Xu, Jian-yi; Li, Bo; Liu, Xiao-jun

2014-08-01

We proposed and investigated a solution to the inverse acoustic cloak problem, an anti-stealth technology to make cloaks visible, using the time-lapse reversal (TLR) method. The TLR method reconstructs the image of an unknown acoustic cloak by utilizing scattered acoustic waves. Compared to previous anti-stealth methods, the TLR method can determine not only the existence of a cloak but also its exact geometric information like definite shape, size, and position. Here, we present the process for TLR reconstruction based on time reversal invariance. This technology may have potential applications in detecting various types of cloaks with different geometric parameters.

Impact of information and communication technology on interprofessional collaboration for chronic disease management: a systematic review.

PubMed

Barr, Neil; Vania, Diana; Randall, Glen; Mulvale, Gillian

2017-10-01

Objectives Information and communication technology is often lauded as the key to enhancing communication among health care providers. However, its impact on interprofessional collaboration is unclear. The objective of this study was to determine the extent to which it improves communication and, subsequently, enhances interprofessional collaboration in chronic disease management. Methods A systematic review of academic literature using two electronic platforms: HealthSTAR and Web of Science (core collection and MEDLINE). To be eligible for inclusion in the review, articles needed to be peer-reviewed; accessible in English and focused on how technology supports, or might support, collaboration (through enhanced communication) in chronic disease management. Studies were assessed for quality and a narrative synthesis conducted. Results The searches identified 289 articles of which six were included in the final analysis (three used qualitative methods, two were descriptive and one used mixed methods). Various forms of information and communication technology were described including electronic health records, online communities/learning resources and telehealth/telecare. Three themes emerged from the studies that may provide insights into how communication that facilitates collaboration in chronic disease management might be enhanced: professional conflict, collective engagement and continuous learning. Conclusions The success of technology in enhancing collaboration for chronic disease management depends upon supporting the social relationships and organization in which the technology will be placed. Decision-makers should take into account and work toward balancing the impact of technology together with the professional and cultural characteristics of health care teams.

[Application of digital earth technology in research of traditional Chinese medicine resources].

PubMed

Liu, Jinxin; Liu, Xinxin; Gao, Lu; Wei, Yingqin; Meng, Fanyun; Wang, Yongyan

2011-02-01

This paper describes the digital earth technology and its core technology-"3S" integration technology. The advance and promotion of the "3S" technology provide more favorable means and technical support for Chinese medicine resources survey, evaluation and appropriate zoning. Grid is a mature and popular technology that can connect all kinds of information resources. The author sums up the application of digital earth technology in the research of traditional Chinese medicine resources in recent years, and proposes the new method and technical route of investigation in traditional Chinese medicine resources, traditional Chinese medicine zoning and suitability assessment by combining the digital earth technology and grid.

Instructional Technology. Symposium 18. [Concurrent Symposium Session at AHRD Annual Conference, 2000.

ERIC Educational Resources Information Center

2000

Three presentations are provided from Symposium 18, Instructional Technology, of the Academy of Human Resource Development (HRD) 2000 Conference Proceedings. "Strategies for Facilitating Interaction When Using Technology-Mediated Training Methods [TMTM]" (Jeffrey S. Lewis, Gary D. Geroy, Orlando Griego) focuses on differences between…

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2010 CFR

2010-10-01

... attempts to use instrumentalities, weapons or other methods designed or intended to cause mass destruction... Technology (QATT) means any technology designed, developed, modified, procured, or sold for the purpose of... (including information technology) or any combination of the foregoing. Design services, consulting services...

New Tools for Design

ERIC Educational Resources Information Center

Halliburton, Cal; Roza, Victoria

2006-01-01

Technology educators are constantly in search of new tools and methods to enhance the education of their students. This article is an excerpt from a longer article published in "The Technology Teacher" that introduced the technology education community to a research- and knowledge-based methodology for design--invention and innovation. This…

SITE TECHNOLOGY PROFILES - 11TH EDITION, EMERGING TECHNOLOGY PROGRAM, VOLUME 2

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program, now in its eleventh year is an integral part of EPA's research into alternative cleanup methods for hazardous waste sites around the nation. The SITE Program was created to encourage the development and routine use o...

The Advanced Technology Environmental Education Center Summer Fellows Institute.

ERIC Educational Resources Information Center

Depken, Diane E.; Zeman, Catherine L.; Lensch, Ellen Kabat; Brown, Edward J.

2002-01-01

Describes the background, activities, and outcomes of the Advanced Technology Environmental Education Center (ATEEC) and its Summer Fellows Institutes as a model for disciplinary and cross-disciplinary infusion of environmental science and technology content, curriculum, and methods into the classroom. Presents experiences, themes, and activities…

Teacher Candidate Technology Integration: For Student Learning or Instruction?

ERIC Educational Resources Information Center

Clark, Cynthia; Zhang, Shaoan; Strudler, Neal

2015-01-01

Transfer of instructional technology knowledge for student-centered learning by teacher candidates is investigated in this study. Using the transfer of learning theoretical framework, a mixed methods research design was employed to investigate whether secondary teacher candidates were able to transfer the instructional technology knowledge for…

Distance Learning for Community Education

ERIC Educational Resources Information Center

Cook, Anthony A.

2010-01-01

This article takes a look at the influence of technology on curriculum and teaching. It specifically examines the new wave of available technology and the opportunity for schools to make inroads into community outreach by engaging new, technological learning methods. The relationship among community education, public school relations, and distance…

Promoting Technology-Assisted Active Learning in Computer Science Education

ERIC Educational Resources Information Center

Gao, Jinzhu; Hargis, Jace

2010-01-01

This paper describes specific active learning strategies for teaching computer science, integrating both instructional technologies and non-technology-based strategies shown to be effective in the literature. The theoretical learning components addressed include an intentional method to help students build metacognitive abilities, as well as…

Proceedings: international conference on transfer of forest science knowledge and technology.

Treesearch

Cynthia Miner; Ruth Jacobs; Dennis Dykstra; Becky Bittner

2007-01-01

This proceedings compiles papers presented by extensionists, natural resource specialists, scientists, technology transfer specialists, and others at an international conference that examined knowledge and technology transfer theories, methods, and case studies. Theory topics included adult education, applied science, extension, diffusion of innovations, social...

New Model of Information Technology Governance in the Government of Gorontalo City using Framework COBIT 4.1

NASA Astrophysics Data System (ADS)

Bouty, A. A.; Koniyo, M. H.; Novian, D.

2018-02-01

This study aims to determine the level of maturity of information technology governance in Gorontalo city government by applying the COBIT framework 4.1. The research method is the case study method, by conducting surveys and data collection at 25 institution in Gorontalo City. The results of this study is the analysis of information technology needs based on the measurement of maturity level. The results of the measurement of the maturity level of information technology governance shows that there are still many business processes running at lower level, from 9 existing business processes there are 4 processes at level 2 (repetitive but intuitive) and 3 processes at level 1 (Initial/Ad hoc). With these results, is expected that the government of Gorontalo city immediately make improvements to the governance of information technology so that it can run more effectively and efficiently.

Emerging technologies in medical applications of minimum volume vitrification

PubMed Central

Zhang, Xiaohui; Catalano, Paolo N; Gurkan, Umut Atakan; Khimji, Imran; Demirci, Utkan

2011-01-01

Cell/tissue biopreservation has broad public health and socio-economic impact affecting millions of lives. Cryopreservation technologies provide an efficient way to preserve cells and tissues targeting the clinic for applications including reproductive medicine and organ transplantation. Among these technologies, vitrification has displayed significant improvement in post-thaw cell viability and function by eliminating harmful effects of ice crystal formation compared to the traditional slow freezing methods. However, high cryoprotectant agent concentrations are required, which induces toxicity and osmotic stress to cells and tissues. It has been shown that vitrification using small sample volumes (i.e., <1 μl) significantly increases cooling rates and hence reduces the required cryoprotectant agent levels. Recently, emerging nano- and micro-scale technologies have shown potential to manipulate picoliter to nanoliter sample sizes. Therefore, the synergistic integration of nanoscale technologies with cryogenics has the potential to improve biopreservation methods. PMID:21955080

[Investigation on Spray Drying Technology of Auricularia auricular Extract].

PubMed

Zhou, Rong; Chen, Hui; Xie, Yuan; Chen, Peng; Wang, Luo-lin

2015-07-01

To investigate the feasibility of spray drying technology of Auricularia auricular extract and its optimum process. On the basis of single factor test, with the yield of dry extract and the content of polysaccharide as indexes, orthogonal test method was used to optimize the spray drying technology on the inlet air temperature, injection speed and crude drug content. Using ultraviolet spectrophotometry, thin layer chromatography(TLC) and pharmacodynamics as indicators, extracts prepared by traditional alcohol precipitation drying process and spray drying process were compared. Compared with the traditional preparation method, the extract prepared by spray drying had little differences from the polysaccharide content, TLC and the function of reducing TG and TC, and its optimum technology condition were as follows: The inlet air temperature was 180 °C, injection speed was 10 ml/min and crude drugs content was 0. 4 g/mL. Auricularia auricular extract by spray drying technology is stable and feasible with high economic benefit.

Advanced Durability and Damage Tolerance Design and Analysis Methods for Composite Structures: Lessons Learned from NASA Technology Development Programs

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Starnes, James H., Jr.; Shuart, Mark J.

2003-01-01

Aerospace vehicles are designed to be durable and damage tolerant. Durability is largely an economic life-cycle design consideration whereas damage tolerance directly addresses the structural airworthiness (safety) of the vehicle. However, both durability and damage tolerance design methodologies must address the deleterious effects of changes in material properties and the initiation and growth of microstructural damage that may occur during the service lifetime of the vehicle. Durability and damage tolerance design and certification requirements are addressed for commercial transport aircraft and NASA manned spacecraft systems. The state-of-the-art in advanced design and analysis methods is illustrated by discussing the results of several recently completed NASA technology development programs. These programs include the NASA Advanced Subsonic Technology Program demonstrating technologies for large transport aircraft and the X-33 hypersonic test vehicle demonstrating technologies for a single-stage-to-orbit space launch vehicle.

WE-A-18C-01: Emerging and Innovative Ultrasound Technology in Diagnosis and Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emelianov, S; Oraevsky, A; Stafford, R

The application of new ultrasound-based technologies in medicine has expanded in recent years. One area of rapid growth has been the combination of ultrasound with other methods of image generation and imaging modalities to produce hybrid approaches for diagnostic imaging and noninvasive therapeutic intervention. The presentations associated with this session will provide an overview of two emerging technologies that are currently being developed and implemented to enhance ultrasound-related diagnostic imaging and therapy: the utilization of optically-induced ultrasound imaging (optoacoustic / photoacoustic imaging) and the use of magnetic resonance imaging to guide the use of high-intensity focused ultrasound for therapeutic applications.more » Learning Objectives: Develop a general understanding of the underlying technologies associated with optoacoustic / photoacoustic tomography and MRguided high-intensity focused ultrasound. Develop an understanding of the current methods of these new ultrasound-based technologies in preclinical research and clinical applications.« less

Enhancing Fracture and Wear Resistance of Dentures/Overdentures Utilizing Digital Technology: A Case Series Report.

PubMed

Afify, Ahmed; Haney, Stephan

2016-08-01

Since it was first introduced into the dental world, computer-aided design/computer-aided manufacturing (CAD/CAM) technology has improved dramatically in regards to both data acquisition and fabrication abilities. CAD/CAM is capable of providing well-fitting intra- and extraoral prostheses when sound guidelines are followed. As CAD/CAM technology encompasses both surgical and prosthetic dental applications as well as fixed and removable aspects, it could improve the average quality of dental prostheses compared with the results obtained by conventional manufacturing methods. The purpose of this article is to provide an introduction into the methods in which this technology may be used to enhance the wear and fracture resistance of dentures and overdentures. This article will also showcase two clinical reports in which CAD/CAM technology has been implemented. © 2016 by the American College of Prosthodontists.

Overview of selected surrogate technologies for high-temporal resolution suspended-sediment monitoring

USGS Publications Warehouse

Gray, John R.; Gartner, Jeffrey W.

2010-01-01

Traditional methods for characterizing selected properties of suspended sediments in rivers are being augmented and in some cases replaced by cost-effective surrogate instruments and methods that produce a temporally dense time series of quantifiably accurate data for use primarily in sediment-flux computations. Turbidity is the most common such surrogate technology, and the first to be sanctioned by the U.S. Geological Survey for use in producing data used in concert with water-discharge data to compute sediment concentrations and fluxes for storage in the National Water Information System. Other technologies, including laser-diffraction, digital photo-optic, acoustic-attenuation and backscatter, and pressure-difference techniques are being evaluated for producing reliable sediment concentration and, in some cases, particle-size distribution data. Each technology addresses a niche for sediment monitoring. Their performances range from compelling to disappointing. Some of these technologies have the potential to revolutionize fluvial-sediment data collection, analysis, and availability.

Rehabilitation Risk Management: Enabling Data Analytics with Quantified Self and Smart Home Data.

PubMed

Hamper, Andreas; Eigner, Isabella; Wickramasinghe, Nilmini; Bodendorf, Freimut

2017-01-01

A variety of acute and chronic diseases require rehabilitation at home after treatment. Outpatient rehabilitation is crucial for the quality of the medical outcome but is mainly performed without medical supervision. Non-Compliance can lead to severe health risks and readmission to the hospital. While the patient is closely monitored in the hospital, methods and technologies to identify risks at home have to be developed. We analyze state-of-the-art monitoring systems and technologies and show possibilities to transfer these technologies into rehabilitation monitoring. For this purpose, we analyze sensor technology from the field of Quantified Self and Smart Homes. The available sensor data from this consumer grade technology is summarized to give an overview of the possibilities for medical data analytics. Subsequently, we show a conceptual roadmap to transfer data analytics methods to sensor based rehabilitation risk management.

Cell-Based Selection Expands the Utility of DNA-Encoded Small-Molecule Library Technology to Cell Surface Drug Targets: Identification of Novel Antagonists of the NK3 Tachykinin Receptor.

PubMed

Wu, Zining; Graybill, Todd L; Zeng, Xin; Platchek, Michael; Zhang, Jean; Bodmer, Vera Q; Wisnoski, David D; Deng, Jianghe; Coppo, Frank T; Yao, Gang; Tamburino, Alex; Scavello, Genaro; Franklin, G Joseph; Mataruse, Sibongile; Bedard, Katie L; Ding, Yun; Chai, Jing; Summerfield, Jennifer; Centrella, Paolo A; Messer, Jeffrey A; Pope, Andrew J; Israel, David I

2015-12-14

DNA-encoded small-molecule library technology has recently emerged as a new paradigm for identifying ligands against drug targets. To date, this technology has been used with soluble protein targets that are produced and used in a purified state. Here, we describe a cell-based method for identifying small-molecule ligands from DNA-encoded libraries against integral membrane protein targets. We use this method to identify novel, potent, and specific inhibitors of NK3, a member of the tachykinin family of G-protein coupled receptors (GPCRs). The method is simple and broadly applicable to other GPCRs and integral membrane proteins. We have extended the application of DNA-encoded library technology to membrane-associated targets and demonstrate the feasibility of selecting DNA-tagged, small-molecule ligands from complex combinatorial libraries against targets in a heterogeneous milieu, such as the surface of a cell.

Toward an applied technology for quality measurement in health care.

PubMed

Berwick, D M

1988-01-01

Cost containment, financial incentives to conserve resources, the growth of for-profit hospitals, an aggressive malpractice environment, and demands from purchasers are among the forces today increasing the need for improved methods that measure quality in health care. At the same time, increasingly sophisticated databases and the existence of managed care systems yield new opportunities to observe and correct quality problems. Research on targets of measurement (structure, process, and outcome) and methods of measurement (implicit, explicit, and sentinel methods) has not yet produced managerially useful applied technology for quality measurement in real-world settings. Such an applied technology would have to be cheaper, faster, more flexible, better reported, and more multidimensional than the majority of current research on quality assurance. In developing a new applied technology for the measurement of health care quality, quantitative disciplines have much to offer, such as decision support systems, criteria based on rigorous decision analyses, utility theory, tools for functional status measurement, and advances in operations research.

Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops.

PubMed

Zhang, Cunji; Yao, Xifan; Zhang, Jianming

2015-12-03

Radio Frequency Identification (RFID) technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP) technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi(®) Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops.

High-accuracy measurement of low-water-content in liquid using NIR spectral absorption method

NASA Astrophysics Data System (ADS)

Peng, Bao-Jin; Wan, Xu; Jin, Hong-Zhen; Zhao, Yong; Mao, He-Fa

2005-01-01

Water content measurement technologies are very important for quality inspection of food, medicine products, chemical products and many other industry fields. In recent years, requests for accurate low-water-content measurement in liquid are more and more exigent, and great interests have been shown from the research and experimental work. With the development and advancement of modern production and control technologies, more accurate water content technology is needed. In this paper, a novel experimental setup based on near-infrared (NIR) spectral technology and fiber-optic sensor (OFS) is presented. It has a good measurement accuracy about -/+ 0.01%, which is better, to our knowledge, than most other methods published until now. It has a high measurement resolution of 0.001% in the measurement range from zero to 0.05% for water-in-alcohol measurement, and the water-in-oil measurement is carried out as well. In addition, the advantages of this method also include pollution-free to the measured liquid, fast measurement and so on.

Abnormal Condition Monitoring of Workpieces Based on RFID for Wisdom Manufacturing Workshops

PubMed Central

Zhang, Cunji; Yao, Xifan; Zhang, Jianming

2015-01-01

Radio Frequency Identification (RFID) technology has been widely used in many fields. However, previous studies have mainly focused on product life cycle tracking, and there are few studies on real-time status monitoring of workpieces in manufacturing workshops. In this paper, a wisdom manufacturing model is introduced, a sensing-aware environment for a wisdom manufacturing workshop is constructed, and RFID event models are defined. A synthetic data cleaning method is applied to clean the raw RFID data. The Complex Event Processing (CEP) technology is adopted to monitor abnormal conditions of workpieces in real time. The RFID data cleaning method and data mining technology are examined by simulation and physical experiments. The results show that the synthetic data cleaning method preprocesses data well. The CEP based on the Rifidi® Edge Server technology completed abnormal condition monitoring of workpieces in real time. This paper reveals the importance of RFID spatial and temporal data analysis in real-time status monitoring of workpieces in wisdom manufacturing workshops. PMID:26633418

Development of Technology and Installation for Biohydrogen Production

NASA Astrophysics Data System (ADS)

Pridvizhkin, S. V.; Vyguzova, M. A.; Bazhenov, O. V.

2017-11-01

The article discusses the method for hydrogen production and the device this method application. The relevance of the use of renewable fuels and the positive impact of renewable energy on the environment and the economy is also considered. The presented technology relates to a method for hydrogen production from organic materials subject to anaerobic fermentation, such as the components of solid municipal waste, sewage sludge and agricultural enterprises wastes, sewage waste. The aim of the research is to develop an effective eco-friendly technology for hydrogen producing within an industrial project To achieve the goal, the following issues have been addressed in the course of the study: - development of the process schemes for hydrogen producing from organic materials; - development of the technology for hydrogen producing; - optimization of a biogas plant with the aim of hydrogen producing at one of the fermentation stages; - approbation of the research results. The article is recommended for engineers and innovators working on the renewable energy development issues.

Ames expedited site characterization demonstration at the former manufactured gas plant site, Marshalltown, Iowa

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bevolo, A.J.; Kjartanson, B.H.; Wonder, J.D.

1996-03-01

The goal of the Ames Expedited Site Characterization (ESC) project is to evaluate and promote both innovative technologies (IT) and state-of-the-practice technologies (SOPT) for site characterization and monitoring. In April and May 1994, the ESC project conducted site characterization, technology comparison, and stakeholder demonstration activities at a former manufactured gas plant (FMGP) owned by Iowa Electric Services (IES) Utilities, Inc., in Marshalltown, Iowa. Three areas of technology were fielded at the Marshalltown FMGP site: geophysical, analytical and data integration. The geophysical technologies are designed to assess the subsurface geological conditions so that the location, fate and transport of the targetmore » contaminants may be assessed and forecasted. The analytical technologies/methods are designed to detect and quantify the target contaminants. The data integration technology area consists of hardware and software systems designed to integrate all the site information compiled and collected into a conceptual site model on a daily basis at the site; this conceptual model then becomes the decision-support tool. Simultaneous fielding of different methods within each of the three areas of technology provided data for direct comparison of the technologies fielded, both SOPT and IT. This document reports the results of the site characterization, technology comparison, and ESC demonstration activities associated with the Marshalltown FMGP site. 124 figs., 27 tabs.« less

Quality data collection and management technology of aerospace complex product assembly process

NASA Astrophysics Data System (ADS)

Weng, Gang; Liu, Jianhua; He, Yongxi; Zhuang, Cunbo

2017-04-01

Aiming at solving problems of difficult management and poor traceability for discrete assembly process quality data, a data collection and management method is proposed which take the assembly process and BOM as the core. Data collection method base on workflow technology, data model base on BOM and quality traceability of assembly process is included in the method. Finally, assembly process quality data management system is developed and effective control and management of quality information for complex product assembly process is realized.

Photonic integrated circuits based on silica and polymer PLC

NASA Astrophysics Data System (ADS)

Izuhara, T.; Fujita, J.; Gerhardt, R.; Sui, B.; Lin, W.; Grek, B.

2013-03-01

Various methods of hybrid integration of photonic circuits are discussed focusing on merits and challenges. Material platforms discussed in this report are mainly polymer and silica. We categorize the hybridization methods using silica and polymer waveguides into two types, chip-to-chip and on-chip integration. General reviews of these hybridization technologies from the past works are reviewed. An example for each method is discussed in details. We also discuss current status of our silica PLC hybrid integration technology.

Measuring the Return on Information Technology: A Knowledge-Based Approach for Revenue Allocation at the Process and Firm Level

DTIC Science & Technology

2005-07-01

approach for measuring the return on Information Technology (IT) investments. A review of existing methods suggests the difficulty in adequately...measuring the returns of IT at various levels of analysis (e.g., firm or process level). To address this issue, this study aims to develop a method for...view (KBV), this paper proposes an analytic method for measuring the historical revenue and cost of IT investments by estimating the amount of

Qualitative Research for Patient Safety Using ICTs: Methodological Considerations in the Technological Age.

PubMed

Yee, Kwang Chien; Wong, Ming Chao; Turner, Paul

2017-01-01

Considerable effort and resources have been dedicated to improving the quality and safety of patient care through health information systems, but there is still significant scope for improvement. One contributing factor to the lack of progress in patient safety improvement especially where technology has been deployed relates to an over-reliance on purely objective, quantitative, positivist research paradigms as the basis for generating and validating evidence of improvement. This paper argues the need for greater recognition and accommodation of evidence of improvement generated through more subjective, qualitative and pragmatic research paradigms to aid patient safety especially where technology is deployed. This paper discusses how acknowledging the role and value of more subjective ontologies and pragmatist epistemologies can support improvement science research. This paper illustrates some challenges and benefits from adopting qualitative research methods in patient safety improvement projects, particularly focusing challenges in the technological era. While adopting methods that can more readily capture, analyse and interpret direct user experiences, attitudes, insights and behaviours in their contextual settings, patient safety can be enhanced 'on the ground' and errors reduced and/or mitigated, challenges of using these methods with the younger "technologically-centred" healthcare professionals and patients needs to recognised.