Virtual environment and computer-aided technologies used for system prototyping and requirements development

NASA Technical Reports Server (NTRS)

Logan, Cory; Maida, James; Goldsby, Michael; Clark, Jim; Wu, Liew; Prenger, Henk

1993-01-01

The Space Station Freedom (SSF) Data Management System (DMS) consists of distributed hardware and software which monitor and control the many onboard systems. Virtual environment and off-the-shelf computer technologies can be used at critical points in project development to aid in objectives and requirements development. Geometric models (images) coupled with off-the-shelf hardware and software technologies were used in The Space Station Mockup and Trainer Facility (SSMTF) Crew Operational Assessment Project. Rapid prototyping is shown to be a valuable tool for operational procedure and system hardware and software requirements development. The project objectives, hardware and software technologies used, data gained, current activities, future development and training objectives shall be discussed. The importance of defining prototyping objectives and staying focused while maintaining schedules are discussed along with project pitfalls.

The Effects of a Chemistry Course with Integrated Information Communication Technologies on University Students' Learning and Attitudes

ERIC Educational Resources Information Center

Su, King-Dow

2008-01-01

The purpose of this study was to evaluate the instructional effects of using animations, static figures, PowerPoint bulletins, and e-plus software as chemistry texts with the aid of computer-based technology. This study analyzed the characteristics of students involved in three multimedia courses and their achievement and attitude toward chemistry…

Fracture in Compression of Brittle Solids

DTIC Science & Technology

1983-08-01

SUPPLEMENTARY NOTES 19. KEY WORDS (Continue on reverse aide It necesaray and id:5ntily by block number) Acoustic Emission High Strength Steel Compression...mechanistic models are related to the phenomenological developments in dilatational plasticity that have been applied widely in concrete technology. The...is reviewed in some detail, both from the point of view of fundamentals as well as technological applications. Experimental verification of models is

Computer-Aided Instruction: College Algebra Students' Perceptions

ERIC Educational Resources Information Center

Aichele, Douglas B.; Tree, D. Rae; Utley, Juliana; Wescoatt, Benjamin

2012-01-01

Technology permeates our daily lives; education has not been untouched. Liaw (2002) points out that "teachers, trainers, and instructional designers of computer-based or Web-based instruction would benefit by being more attentive to learners' perceptions toward Web-based environments." Reviewing the earlier research into student perceptions toward…

NASA/DOD Control/Structures Interaction Technology, 1986

NASA Technical Reports Server (NTRS)

Wright, Robert L. (Compiler)

1986-01-01

Control/structures interactions, deployment dynamics and system performance of large flexible spacecraft are discussed. Spacecraft active controls, deployable truss structures, deployable antennas, solar power systems for space stations, pointing control systems for space station gimballed payloads, computer-aided design for large space structures, and passive damping for flexible structures are among the topics covered.

EduSpeak[R]: A Speech Recognition and Pronunciation Scoring Toolkit for Computer-Aided Language Learning Applications

ERIC Educational Resources Information Center

Franco, Horacio; Bratt, Harry; Rossier, Romain; Rao Gadde, Venkata; Shriberg, Elizabeth; Abrash, Victor; Precoda, Kristin

2010-01-01

SRI International's EduSpeak[R] system is a software development toolkit that enables developers of interactive language education software to use state-of-the-art speech recognition and pronunciation scoring technology. Automatic pronunciation scoring allows the computer to provide feedback on the overall quality of pronunciation and to point to…

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

Deep Needle Procedures: Improving Safety With Ultrasound Visualization

PubMed Central

Peabody, Christopher R.; Mandavia, Diku

2017-01-01

Abstract Promoting patient safety and increasing health care quality have dominated the health care landscape during the last 15 years. Health care regulators and payers are now tying patient safety outcomes and best practices to hospital reimbursement. Many health care leaders are searching for new technologies that not only make health care for patients safer but also reduce overall health care costs. New advances in ultrasonography have made this technology available to health care providers at the patient’s bedside. Point-of-care ultrasound assistance now aids providers with real-time diagnosis and with visualization for procedural guidance. This is especially true for common deep needle procedures such as central venous catheter insertion, thoracentesis, and paracentesis. There is now mounting evidence that clinician-performed point-of-care ultrasound improves patient safety, enhances health care quality, and reduces health care cost for deep needle procedures. Furthermore, the miniaturization, ease of use, and the evolving affordability of ultrasound have now made this technology widely available. The adoption of point-of-care ultrasonography has reached a tipping point and should be seriously considered the safety standard for all hospital-based deep needle procedures. PMID:24786918

Traffic sign detection in MLS acquired point clouds for geometric and image-based semantic inventory

NASA Astrophysics Data System (ADS)

Soilán, Mario; Riveiro, Belén; Martínez-Sánchez, Joaquín; Arias, Pedro

2016-04-01

Nowadays, mobile laser scanning has become a valid technology for infrastructure inspection. This technology permits collecting accurate 3D point clouds of urban and road environments and the geometric and semantic analysis of data became an active research topic in the last years. This paper focuses on the detection of vertical traffic signs in 3D point clouds acquired by a LYNX Mobile Mapper system, comprised of laser scanning and RGB cameras. Each traffic sign is automatically detected in the LiDAR point cloud, and its main geometric parameters can be automatically extracted, therefore aiding the inventory process. Furthermore, the 3D position of traffic signs are reprojected on the 2D images, which are spatially and temporally synced with the point cloud. Image analysis allows for recognizing the traffic sign semantics using machine learning approaches. The presented method was tested in road and urban scenarios in Galicia (Spain). The recall results for traffic sign detection are close to 98%, and existing false positives can be easily filtered after point cloud projection. Finally, the lack of a large, publicly available Spanish traffic sign database is pointed out.

Performance factors of mobile rich media job aids for community health workers

PubMed Central

Florez-Arango, Jose F; Dunn, Kim; Zhang, Jiajie

2011-01-01

Objective To study and analyze the possible benefits on performance of community health workers using point-of-care clinical guidelines implemented as interactive rich media job aids on small-format mobile platforms. Design A crossover study with one intervention (rich media job aids) and one control (traditional job aids), two periods, with 50 community health workers, each subject solving a total 15 standardized cases per period per period (30 cases in total per subject). Measurements Error rate per case and task, protocol compliance. Results A total of 1394 cases were evaluated. Intervention reduces errors by an average of 33.15% (p=0.001) and increases protocol compliance 30.18% (p<0.001). Limitations Medical cases were presented on human patient simulators in a laboratory setting, not on real patients. Conclusion These results indicate encouraging prospects for mHealth technologies in general, and the use of rich media clinical guidelines on cell phones in particular, for the improvement of community health worker performance in developing countries. PMID:21292702

Performance factors of mobile rich media job aids for community health workers.

PubMed

Florez-Arango, Jose F; Iyengar, M Sriram; Dunn, Kim; Zhang, Jiajie

2011-01-01

To study and analyze the possible benefits on performance of community health workers using point-of-care clinical guidelines implemented as interactive rich media job aids on small-format mobile platforms. A crossover study with one intervention (rich media job aids) and one control (traditional job aids), two periods, with 50 community health workers, each subject solving a total 15 standardized cases per period per period (30 cases in total per subject). Error rate per case and task, protocol compliance. A total of 1394 cases were evaluated. Intervention reduces errors by an average of 33.15% (p = 0.001) and increases protocol compliance 30.18% (p < 0.001). Limitations Medical cases were presented on human patient simulators in a laboratory setting, not on real patients. These results indicate encouraging prospects for mHealth technologies in general, and the use of rich media clinical guidelines on cell phones in particular, for the improvement of community health worker performance in developing countries.

Multimedia Image Technology and Computer Aided Manufacturing Engineering Analysis

NASA Astrophysics Data System (ADS)

Nan, Song

2018-03-01

Since the reform and opening up, with the continuous development of science and technology in China, more and more advanced science and technology have emerged under the trend of diversification. Multimedia imaging technology, for example, has a significant and positive impact on computer aided manufacturing engineering in China. From the perspective of scientific and technological advancement and development, the multimedia image technology has a very positive influence on the application and development of computer-aided manufacturing engineering, whether in function or function play. Therefore, this paper mainly starts from the concept of multimedia image technology to analyze the application of multimedia image technology in computer aided manufacturing engineering.

Evaluation of Extended-Wear Hearing Aid Technology for Operational Military Use

DTIC Science & Technology

2016-07-01

listeners without degrading auditory situational awareness. To this point, significant progress has been made in this evaluation process. The devices...provide long-term hearing protection for listeners with normal hearing with minimal impact on auditory situational awareness and minimal annoyance due to...Test Plan: A comprehensive test plan is complete for the measurements at AFRL, which will incorporate goals 1-2 and 4-5 above using a normal

Low Cost Precision Lander for Lunar Exploration

NASA Astrophysics Data System (ADS)

Hoppa, G. V.; Head, J. N.; Gardner, T. G.; Seybold, K. G.

2004-12-01

For 60 years the US Defense Department has invested heavily in producing small, low mass, precision-guided vehicles. The technologies matured under these programs include terrain-aided navigation, closed loop terminal guidance algorithms, robust autopilots, high thrust-to-weight propulsion, autonomous mission management software, sensors, and data fusion. These technologies will aid NASA in addressing New Millennium Science and Technology goals as well as the requirements flowing from the Moon to Mars vision articulated in January 2004. Establishing and resupplying a long-term lunar presence will require automated landing precision not yet demonstrated. Precision landing will increase safety and assure mission success. In our lander design, science instruments amount to 10 kg, 16% of the lander vehicle mass. This compares favorably with 7% for Mars Pathfinder and less than 15% for Surveyor. The mission design relies on a cruise stage for navigation and TCMs for the lander's flight to the moon. The landing sequence begins with a solid motor burn to reduce the vehicle speed to 300-450 m/s. At this point the lander is about 2 minutes from touchdown and has 600 to 700 m/s delta-v capability. This allows for about 10 km of vehicle divert during terminal descent. This concept of operations closely mimics missile operational protocol used for decades: the vehicle remains inert, then must execute its mission flawlessly on a moment's notice. The vehicle design uses a propulsion system derived from heritage MDA programs. A redesigned truss provides hard points for landing gear, electronics, power supply, and science instruments. A radar altimeter and a Digital Scene Matching Area Correlator (DSMAC) provide data for the terminal guidance algorithms. This approach leverages the billions of dollars DoD has invested in these technologies, to land useful science payloads precisely on the lunar surface at relatively low cost.

C.A.D. and ergonomic workstations conception

NASA Astrophysics Data System (ADS)

Keravel, Francine

1986-07-01

Computer Aided Design is able to perform workstation's conception. An ergonomic data could be complete this view and warrant a coherent fiability conception. Complexe form representation machines, anthropometric data and environment factors are allowed to perceive the limit points between humain and new technology situation. Work ability users, safety, confort and human efficiency could be also included. Such a programm with expert system integration will give a complete listing appreciation about workstation's conception.

The application of computer-aided technologies in automotive styling design

NASA Astrophysics Data System (ADS)

Zheng, Ze-feng; Zhang, Ji; Zheng, Ying

2012-04-01

In automotive industry, outline design is its life and creative design is its soul indeed. Computer-aided technology has been widely used in the automotive industry and more and more attention has been paid. This paper chiefly introduce the application of computer-aided technologies including CAD, CAM and CAE, analyses the process of automotive structural design and describe the development tendency of computer-aided design.

Virtual hospital--a computer-aided platform to evaluate the sense of direction.

PubMed

Jiang, Ching-Fen; Li, Yuan-Shyi

2007-01-01

This paper presents a computer-aided platform, named Virtual Hospital (VH), to evaluate the wayfinding ability that is found impaired in senile people with early dementia. The development of the VH takes the advantage of virtual reality technology to make the evaluation of the sense of direction more convenient and accurate then the conventional way. A pilot study was carried out to test its feasibility in differentiating the sense of direction between different genders. The results with significant differences in the response time (p<0.05) and the pointing error (p<0.01) between genders suggest the potential of the VH for clinical uses. Further improvement on the human-machine interface is necessary to make it easy for geriatric people to use.

The Future of Hearing Aid Technology

PubMed Central

Edwards, Brent

2007-01-01

Hearing aids have advanced significantly over the past decade, primarily due to the maturing of digital technology. The next decade should see an even greater number of innovations to hearing aid technology, and this article attempts to predict in which areas the new developments will occur. Both incremental and radical innovations in digital hearing aids will be driven by research advances in the following fields: (1) wireless technology, (2) digital chip technology, (3) hearing science, and (4) cognitive science. The opportunities and limitations for each of these areas will be discussed. Additionally, emerging trends such as connectivity and individualization will also drive new technology, and these are discussed within the context of the areas given here. PMID:17301336

Imaging Science Panel. Multispectral Imaging Science Working Group joint meeting with Information Science Panel: Introduction

NASA Technical Reports Server (NTRS)

1982-01-01

The state-of-the-art of multispectral sensing is reviewed and recommendations for future research and development are proposed. specifically, two generic sensor concepts were discussed. One is the multispectral pushbroom sensor utilizing linear array technology which operates in six spectral bands including two in the SWIR region and incorporates capabilities for stereo and crosstrack pointing. The second concept is the imaging spectrometer (IS) which incorporates a dispersive element and area arrays to provide both spectral and spatial information simultaneously. Other key technology areas included very large scale integration and the computer aided design of these devices.

Remote sensing in Michigan for land resource management

NASA Technical Reports Server (NTRS)

Sattinger, I. J.; Sellman, A. N.; Istvan, L. B.; Cook, J. J.

1973-01-01

During the period from June 1972 to June 1973, remote sensing techniques were applied to the following tasks: (1) mapping Michigan's land resources, (2) waterfowl habitat management at Point Mouillee, (3) mapping of Lake Erie shoreline flooding, (4) highway impact assessment, (5) applications of the Earth Resources Technology Satellite, ERTS-1, (6) investigation of natural gas eruptions near Williamsburg, and (7) commercial site selection. The goal of the program was the large scale adaption, by both public agencies and private interests in Michigan, of earth-resource survey technology as an important aid in the solution of current problems in resources management and environmental protection.

Research on TRIZ and CAIs Application Problems for Technology Innovation

NASA Astrophysics Data System (ADS)

Li, Xiangdong; Li, Qinghai; Bai, Zhonghang; Geng, Lixiao

In order to realize application of invent problem solve theory (TRIZ) and computer aided innovation software (CAIs) , need to solve some key problems, such as the mode choice of technology innovation, establishment of technology innovation organization network(TION), and achievement of innovative process based on TRIZ and CAIs, etc.. This paper shows that the demands for TRIZ and CAIs according to the characteristics and existing problem of the manufacturing enterprises. Have explained that the manufacturing enterprises need to set up an open TION of enterprise leading type, and achieve the longitudinal cooperation innovation with institution of higher learning. The process of technology innovation based on TRIZ and CAIs has been set up from researching and developing point of view. Application of TRIZ and CAIs in FY Company has been summarized. The application effect of TRIZ and CAIs has been explained using technology innovation of the close goggle valve product.

Sit Down With Sabin: Merrian Fuller: Efficiency for sale. Who's buying? (LBNL Summer Lecture Series)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fuller, Merrian; Russell, Sabin

Merrian Fuller from the Environmental Energy Technologies Division appeared on July 26th, 2011 for this installment of "Sit Down with Sabin," a conversation in which former reporter Sabin Russell chats with Lab staff about innovative science. They will discuss "Efficiency for Sale. Who's Buying?" During this series of conversations, Russell and Lab staff will explore the ups and downs of pioneering science, all without the aid of PowerPoints.

Computer-Based Aids for Learning, Job Performance, and Decision Making in Military Applications: Emergent Technology and Challenges

DTIC Science & Technology

2003-10-01

paper, which addresses the following questions: Is it worth it? What do we know about the value of technology applications in learning ( education and......fax) fletcher@ida.org SUMMARY Technology -based systems for education , training, and performance aiding (including decision aiding) may pose the

A Historical Perspective on Digital Hearing Aids: How Digital Technology Has Changed Modern Hearing Aids

PubMed Central

Levitt, Harry

2007-01-01

This article provides the author's perspective on the development of digital hearing aids and how digital signal processing approaches have led to changes in hearing aid design. Major landmarks in the evolution of digital technology are identified, and their impact on the development of digital hearing aids is discussed. Differences between analog and digital approaches to signal processing in hearing aids are identified. PMID:17301334

Assistive hearing technologies among students with hearing impairment: factors that promote satisfaction.

PubMed

Rekkedal, Ann Mette

2012-01-01

Hearing technology can play an essential part in the education of deaf and hard-of-hearing children in inclusive schools. Few studies have examined these children's experiences with this technology. This article explores factors pertaining to children's use of and attitudes toward hearing technologies, such as hearing aids, cochlear implants, teacher-worn microphones, and student-worn microphones. The study included 153 deaf and hard-of-hearing students. All students communicated orally and were in inclusive schools from grades 5-10. The results suggest that males view hearing technology more positively than do females. Having severe hearing loss also promoted positive attitudes toward hearing aids and cochlear implants, but not toward microphones. The students with positive self-descriptions tended to be more satisfied with hearing aids or cochlear implants than the students with negative self-descriptions. The main factors promoting the use of hearing aids were severe hearing loss, positive attitudes toward hearing aids, and the sound quality of hearing aids.

State of the art in perceptual design of hearing aids

NASA Astrophysics Data System (ADS)

Edwards, Brent W.; van Tasell, Dianne J.

2002-05-01

Hearing aid capabilities have increased dramatically over the past six years, in large part due to the development of small, low-power digital signal processing chips suitable for hearing aid applications. As hearing aid signal processing capabilities increase, there will be new opportunities to apply perceptually based knowledge to technological development. Most hearing loss compensation techniques in today's hearing aids are based on simple estimates of audibility and loudness. As our understanding of the psychoacoustical and physiological characteristics of sensorineural hearing loss improves, the result should be improved design of hearing aids and fitting methods. The state of the art in hearing aids will be reviewed, including form factors, user requirements, and technology that improves speech intelligibility, sound quality, and functionality. General areas of auditory perception that remain unaddressed by current hearing aid technology will be discussed.

A Hearing Aid Primer 1

ERIC Educational Resources Information Center

Yetter, Carol J.

2009-01-01

This hearing aid primer is designed to define the differences among the three levels of hearing instrument technology: conventional analog circuit technology (most basic), digitally programmable/analog circuit technology (moderately advanced), and fully digital technology (most advanced). Both moderate and advanced technologies mean that hearing…

Local Stability of AIDS Epidemic Model Through Treatment and Vertical Transmission with Time Delay

NASA Astrophysics Data System (ADS)

Novi W, Cascarilla; Lestari, Dwi

2016-02-01

This study aims to explain stability of the spread of AIDS through treatment and vertical transmission model. Human with HIV need a time to positively suffer AIDS. The existence of a time, human with HIV until positively suffer AIDS can be delayed for a time so that the model acquired is the model with time delay. The model form is a nonlinear differential equation with time delay, SIPTA (susceptible-infected-pre AIDS-treatment-AIDS). Based on SIPTA model analysis results the disease free equilibrium point and the endemic equilibrium point. The disease free equilibrium point with and without time delay are local asymptotically stable if the basic reproduction number is less than one. The endemic equilibrium point will be local asymptotically stable if the time delay is less than the critical value of delay, unstable if the time delay is more than the critical value of delay, and bifurcation occurs if the time delay is equal to the critical value of delay.

A study on spatial decision support systems for HIV/AIDS prevention based on COM GIS technology

NASA Astrophysics Data System (ADS)

Yang, Kun; Luo, Huasong; Peng, Shungyun; Xu, Quanli

2007-06-01

Based on the deeply analysis of the current status and the existing problems of GIS technology applications in Epidemiology, this paper has proposed the method and process for establishing the spatial decision support systems of AIDS epidemic prevention by integrating the COM GIS, Spatial Database, GPS, Remote Sensing, and Communication technologies, as well as ASP and ActiveX software development technologies. One of the most important issues for constructing the spatial decision support systems of AIDS epidemic prevention is how to integrate the AIDS spreading models with GIS. The capabilities of GIS applications in the AIDS epidemic prevention have been described here in this paper firstly. Then some mature epidemic spreading models have also been discussed for extracting the computation parameters. Furthermore, a technical schema has been proposed for integrating the AIDS spreading models with GIS and relevant geospatial technologies, in which the GIS and model running platforms share a common spatial database and the computing results can be spatially visualized on Desktop or Web GIS clients. Finally, a complete solution for establishing the decision support systems of AIDS epidemic prevention has been offered in this paper based on the model integrating methods and ESRI COM GIS software packages. The general decision support systems are composed of data acquisition sub-systems, network communication sub-systems, model integrating sub-systems, AIDS epidemic information spatial database sub-systems, AIDS epidemic information querying and statistical analysis sub-systems, AIDS epidemic dynamic surveillance sub-systems, AIDS epidemic information spatial analysis and decision support sub-systems, as well as AIDS epidemic information publishing sub-systems based on Web GIS.

Preparation of superhydrophobic copper surface by a novel silk-screen printing aided electrochemical machining method

NASA Astrophysics Data System (ADS)

Yan, X. Y.; Chen, G. X.; Liu, J. W.

2018-03-01

A kind of superhydrophobic copper surface with micro-nanocomposite structure has been successfully fabricated by employing a silk-screen printing aided electrochemical machining method. At first silk-screen printing technology has been used to form a column point array mask, and then the microcolumn array would be fabricated by electrochemical machining (ECM) effect. In this study, the drop contact angles have been studied and scanning electron microscopy (SEM) has been used to study the surface characteristic of the workpiece. The experiment results show that the micro-nanocomposite structure with cylindrical array can be successfully fabricated on the metal surface. And the maximum contact angle is 151° when the fluoroalkylsilane ethanol solution was used to modify the machined surface in this study.

[The automatic iris map overlap technology in computer-aided iridiagnosis].

PubMed

He, Jia-feng; Ye, Hu-nian; Ye, Miao-yuan

2002-11-01

In the paper, iridology and computer-aided iridiagnosis technologies are briefly introduced and the extraction method of the collarette contour is then investigated. The iris map can be overlapped on the original iris image based on collarette contour extraction. The research on collarette contour extraction and iris map overlap is of great importance to computer-aided iridiagnosis technologies.

Directory of aerospace safety specialized information sources, volume 2

NASA Technical Reports Server (NTRS)

Rubinstein, R. I.; Pinto, J. J.; Meschkow, S. Z.

1976-01-01

A handbook of organizations and experts in specific and well-defined areas of safety technology is presented. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, and operations, as well as information on hazard and failure cause identification, accident analysis, and materials characteristics. Other related areas include the handling and transportation of hazardous chemicals, radioactive isotopes, and liquified natural gases.

Engineering Technology Programs Courses Guide for Computer Aided Design and Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Div. of Vocational Education.

This guide describes the requirements for courses in computer-aided design and computer-aided manufacturing (CAD/CAM) that are part of engineering technology programs conducted in vocational-technical schools in Georgia. The guide is organized in five sections. The first section provides a rationale for occupations in design and in production,…

Touch-screen technology for the dynamic display of -2D spatial information without vision: promise and progress.

PubMed

Klatzky, Roberta L; Giudice, Nicholas A; Bennett, Christopher R; Loomis, Jack M

2014-01-01

Many developers wish to capitalize on touch-screen technology for developing aids for the blind, particularly by incorporating vibrotactile stimulation to convey patterns on their surfaces, which otherwise are featureless. Our belief is that they will need to take into account basic research on haptic perception in designing these graphics interfaces. We point out constraints and limitations in haptic processing that affect the use of these devices. We also suggest ways to use sound to augment basic information from touch, and we include evaluation data from users of a touch-screen device with vibrotactile and auditory feedback that we have been developing, called a vibro-audio interface.

How valuable is physical examination of the cardiovascular system?

PubMed

Elder, Andrew; Japp, Alan; Verghese, Abraham

2016-07-27

Physical examination of the cardiovascular system is central to contemporary teaching and practice in clinical medicine. Evidence about its value focuses on its diagnostic accuracy and varies widely in methodological quality and statistical power. This makes collation, analysis, and understanding of results difficult and limits their application to daily clinical practice. Specific factors affecting interpretation and clinical application include poor standardisation of observers' technique and training, the study of single signs rather than multiple signs or signs in combination with symptoms, and the tendency to compare physical examination directly with technological aids to diagnosis rather than explore diagnostic strategies that combine both. Other potential aspects of the value of physical examination, such as cost effectiveness or patients' perceptions, are poorly studied. This review summarises the evidence for the clinical value of physical examination of the cardiovascular system. The best was judged to relate to the detection and evaluation of valvular heart disease, the diagnosis and treatment of heart failure, the jugular venous pulse in the assessment of central venous pressure, and the detection of atrial fibrillation, peripheral arterial disease, impaired perfusion, and aortic and carotid disease. Although technological aids to diagnosis are likely to become even more widely available at the point of care, the evidence suggests that further research into the value of physical examination of the cardiovascular system is needed, particularly in low resource settings and as a potential means of limiting inappropriate overuse of technological aids to diagnosis. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Technology-Aided Programs for Assisting Communication and Leisure Engagement of Persons with Amyotrophic Lateral Sclerosis: Two Single-Case Studies

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Ferlisi, Gabriele; Ferrarese, Giacomina; Zullo, Valeria; Addante, Luigi M.; Spica, Antonella; Oliva, Doretta

2012-01-01

Technology-aided programs for assisting communication and leisure engagement were assessed in single-case studies involving two men with amyotrophic lateral sclerosis (ALS). Study I involved a 51-year-old man with a virtually total loss of his motor repertoire and assessed a technology-aided program aimed at enabling him to (a) write and send out…

Modeling the User for Education, Training, and Performance Aiding

DTIC Science & Technology

2003-11-01

Eds.) Technology applications in education : A learning view (pp. 79–99). Hillsdale, NJ: Lawrence Erlbaum Associates. Fletcher, J.D. and Johnston, R...2003 symposium on Advanced Technologies for Military Training. v CONTENTS MODELING THE USER FOR EDUCATION , TRAINING, AND PERFORMANCE AIDING EXECUTIVE...using computer technology for education , training, decision-making, and performance aiding. Our focus is on the digital representation of these users

Hearing Aid Fitting in Infants.

ERIC Educational Resources Information Center

Hoover, Brenda M.

2000-01-01

This article examines the latest technological advances in hearing aids and explores the available research to help families and professionals make informed decisions when fitting amplification devices on infants and young children. Diagnostic procedures, evaluation techniques, hearing aid selection, circuit and advanced technology options, and…

Advances in upper limb stroke rehabilitation: a technology push.

PubMed

Loureiro, Rui C V; Harwin, William S; Nagai, Kiyoshi; Johnson, Michelle

2011-10-01

Strokes affect thousands of people worldwide leaving sufferers with severe disabilities affecting their daily activities. In recent years, new rehabilitation techniques have emerged such as constraint-induced therapy, biofeedback therapy and robot-aided therapy. In particular, robotic techniques allow precise recording of movements and application of forces to the affected limb, making it a valuable tool for motor rehabilitation. In addition, robot-aided therapy can utilise visual cues conveyed on a computer screen to convert repetitive movement practice into an engaging task such as a game. Visual cues can also be used to control the information sent to the patient about exercise performance and to potentially address psychosomatic variables influencing therapy. This paper overviews the current state-of-the-art on upper limb robot-mediated therapy with a focal point on the technical requirements of robotic therapy devices leading to the development of upper limb rehabilitation techniques that facilitate reach-to-touch, fine motor control, whole-arm movements and promote rehabilitation beyond hospital stay. The reviewed literature suggest that while there is evidence supporting the use of this technology to reduce functional impairment, besides the technological push, the challenge ahead lies on provision of effective assessment of outcome and modalities that have a stronger impact transferring functional gains into functional independence.

Satisfaction with Hearing Aids Based on Technology and Style among Hearing Impaired Persons

PubMed Central

Faraji- Khiavi, Farzad; Dashti, Rezvan; Sameni, Seyyed-Jalal; Bayat, Arash

2016-01-01

Introduction: Hearing loss is one of the most disabling impairments. Using a hearing aid as an attempt to improve the hearing problem can positively affect the quality of life for these people. This research was aimed to assess satisfaction of hearing impaired patients with their hearing aids regarding the employed technology and style. Materials and Methods: This descriptive-analytic cross-sectional research was conducted on 187 subjects with hearing loss who were using a hearing aid. The subjects were over 18 years of age and were using a hearing aid for at least 6 months. The Persian version of Satisfaction with Amplification in Daily Life (SADL) questionnaire was the instrument which was used for assessing satisfaction with the hearing aid. Cronbach’s alpha was calculated to be 0.80 for instrument reliability. Results: A significant difference was observed among satisfaction subscales’ mean scores with hearing aid technology. Also a significant difference was observed between the total satisfaction score and the hearing aid model. With respect to the analysis of satisfaction with the hearing aid and its style, cost and services was the only subscale which showed a significant difference (P=0.005). Conclusion: Respondents using hearing aids with different technology and style were estimated to be quite satisfied. Training audiologists in using more appropriate and fitting hearing aids in addition to using self-reporting questionnaires like SADL for estimating patients’ social condition and participation in their life can essentially change their disability condition and countervail their hearing loss. PMID:27738608

Silencing women’s sexuality: global AIDS policies and the case of the female condom

PubMed Central

Peters, Anny JTP; van Driel, Francien TM; Jansen, Willy HM

2013-01-01

Introduction The female condom is the only evidence-based AIDS prevention technology that has been designed for the female body; yet, most women do not have access to it. This is remarkable since women constitute the majority of all HIV-positive people living in sub-Saharan Africa, and gender inequality is seen as a driving force of the AIDS epidemic. In this study, we analyze how major actors in the AIDS prevention field frame the AIDS problem, in particular the female condom in comparison to other prevention technologies, in their discourse and policy formulations. Our aim is to gain insight into the discursive power mechanisms that underlie the thinking about AIDS prevention and women’s sexual agency. Methods We analyze the AIDS policies of 16 agencies that constitute the most influential actors in the global response to AIDS. Our study unravels the discursive power of these global AIDS policy actors, when promoting and making choices between AIDS prevention technologies. We conducted both a quantitative and qualitative analysis of how the global AIDS epidemic is being addressed by them, in framing the AIDS problem, labelling of different categories of people for targeting AIDS prevention programmes and in gender marking of AIDS prevention technologies. Results We found that global AIDS policy actors frame the AIDS problem predominantly in the context of gender and reproductive health, rather than that of sexuality and sexual rights. Men’s sexual agency is treated differently from women’s sexual agency. An example of such differentiation and of gender marking is shown by contrasting the framing and labelling of male circumcision as an intervention aimed at the prevention of HIV with that of the female condom. Conclusions The gender-stereotyped global AIDS policy discourse negates women’s agency in sexuality and their sexual rights. This could be an important factor in limiting the scale-up of female condom programmes and hampering universal access to female condoms. PMID:23838151

The effect of a decision aid intervention on decision making about coronary heart disease risk reduction: secondary analyses of a randomized trial

PubMed Central

2014-01-01

Background Decision aids offer promise as a practical solution to improve patient decision making about coronary heart disease (CHD) prevention medications and help patients choose medications to which they are likely to adhere. However, little data is available on decision aids designed to promote adherence. Methods In this paper, we report on secondary analyses of a randomized trial of a CHD adherence intervention (second generation decision aid plus tailored messages) versus usual care in an effort to understand how the decision aid facilitates adherence. We focus on data collected from the primary study visit, when intervention participants presented 45 minutes early to a previously scheduled provider visit; viewed the decision aid, indicating their intent for CHD risk reduction after each decision aid component (individualized risk assessment and education, values clarification, and coaching); and filled out a post-decision aid survey assessing their knowledge, perceived risk, decisional conflict, and intent for CHD risk reduction. Control participants did not present early and received usual care from their provider. Following the provider visit, participants in both groups completed post-visit surveys assessing the number and quality of CHD discussions with their provider, their intent for CHD risk reduction, and their feelings about the decision aid. Results We enrolled 160 patients into our study (81 intervention, 79 control). Within the decision aid group, the decision aid significantly increased knowledge of effective CHD prevention strategies (+21 percentage points; adjusted p<.0001) and the accuracy of perceived CHD risk (+33 percentage points; adjusted p<.0001), and significantly decreased decisional conflict (-0.63; adjusted p<.0001). Comparing between study groups, the decision aid also significantly increased CHD prevention discussions with providers (+31 percentage points; adjusted p<.0001) and improved perceptions of some features of patient-provider interactions. Further, it increased participants’ intentions for any effective CHD risk reducing strategies (+21 percentage points; 95% CI 5 to 37 percentage points), with a majority of the effect from the educational component of the decision aid. Ninety-nine percent of participants found the decision aid easy to understand and 93% felt it easy to use. Conclusions Decision aids can play an important role in improving decisions about CHD prevention and increasing patient-provider discussions and intent to reduce CHD risk. PMID:24575882

Hearing Impairments. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on advances in electronic aids, computers, telecommunications, and videodiscs to assist students with hearing impairments. Electronic aids include hearing aids, telephone devices for the deaf, teletypes, closed captioning systems for television, and…

Technology for Work, Home, and Leisure. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Williams, John M.

This guide provides a brief introduction to several types of technological devices useful to individuals with disabilities and illustrates how some individuals are applying technology in the workplace and at home. Devices described include communication aids, low-vision products, voice-activated systems, environmental controls, and aids for…

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2014 CFR

2014-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2013 CFR

2013-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2010 CFR

2010-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2011 CFR

2011-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

5 CFR 2641.207 - One-year restriction on any former private sector assignee under the Information Technology...

Code of Federal Regulations, 2012 CFR

2012-01-01

... private sector assignee under the Information Technology Exchange Program representing, aiding, counseling... assignee under the Information Technology Exchange Program representing, aiding, counseling or assisting in... the Information Technology Exchange Program, 5 U.S.C. chapter 37, no former assignee shall knowingly...

Technological aids in uniportal video-assisted thoracoscopic surgery.

PubMed

Roque Cañas, Sonia Raquelline; Oviedo Argueta, Alonso José; Wu, Ching Feng; Gonzalez-Rivas, Diego

2017-01-01

With the evolution of uniportal video-assisted thoracoscopic surgery (VATS), the technological aids have come to help skill surgeons to improve the results in thoracic surgery and feasible to perform a complex surgery. The technological aids are divided into three important groups, which make surgical steps easy to perform, besides reducing surgical time and surgical accidents in the hands of experienced surgeons. The groups are: (I) conventional thoracoscopic instruments; (II) sealing devices using in uniportal VATS; (III) high definition cameras, robotic arms prototype and the future robotic aids for uniportal VATS surgery. Uniportal VATS is an example of the continuing search for methods that aim to provide the patient a surgical cure of the disease with the lowest morbidity. That is the reason companies are creating more and new technologies, but the surgeon have to choose properly and to know how, when and where is the moment to use each new aids to avoid mistakes. The future of the thoracic surgery is based on evolution of surgical procedures and innovations to try to reduce even more the surgical and anesthetic trauma. This article summarizes the technological aids to improve and help a thoracoscopics surgeons perform a uniportal VATS feasible and safe.

Hearing aid and hearing assistance technology use in Aotearoa/New Zealand.

PubMed

Kelly-Campbell, Rebecca J; Lessoway, Kamea

2015-05-01

The purpose of this study was to describe factors that are related to hearing aid and hearing assistance technology ownership and use in Aotearoa/New Zealand. Adults with hearing impairment living in New Zealand were surveyed regarding health-related quality of life and device usage. Audiometric data (hearing sensitivity and speech in noise) were collected. Data were obtained from 123 adults with hearing impairment: 73 reported current hearing-aid use, 81 reported current hearing assistance technology use. In both analyses, device users had more difficulty understanding speech in background noise, had poor hearing in both their better and worse hearing ears, and perceived more consequences of hearing impairment in their everyday lives (both emotionally and socially) than non-hearing-aid users. Discriminant analyses showed that the social consequences of hearing impairment and the better ear hearing best classified hearing aid users from non-users but social consequences and worse ear hearing best classified hearing assistance technology users from non-users. Quality of life measurements and speech-in-noise assessments provide useful clinical information. Hearing-impaired adults in New Zealand who use hearing aids also tend to use hearing assistance technology, which has important clinical implications.

Use of technological aids and interpretation services among children and adults with hearing loss.

PubMed

Dammeyer, Jesper; Lehane, Christine; Marschark, Marc

2017-10-01

The technological development of communication aids for people with hearing loss has progressed rapidly over the last decades. Quality has improved and the number of different types of aids has increased. However, few studies have examined the prevalence of technology use and interpreting services use among people with hearing loss as they relate to demographic characteristics of this population. This study reports from national surveys of children and adults with hearing loss. Use of hearing aids, cochlear implants, other aids and interpreting services were analysed with regard to gender, age, degree of hearing loss, mode of communication, having an additional disability, level of educational achievement among adults, and whether or not children lived together with both of their parents. 269 children (0-15 years of age) and 839 adults (16-65 years of age). Differences in technology and service use were associated with age, degree of hearing loss, and mode of communication among children and adults, and gender and level of educational achievement among adults. Individual and social factors have an impact on technological hearing aid and interpreter use. More research about individual differences and clinical implications of support services is needed.

Is AIDS a floating point between HIV seroconversion and death? Insights from the Tricontinental Seroconverter Study.

PubMed

van Benthem, B H; Veugelers, P J; Cornelisse, P G; Strathdee, S A; Kaldor, J M; Shafer, K A; Coutinho, R A; van Griensven, G J

1998-06-18

To investigate the significance of the time from seroconversion to AIDS (incubation time) and other covariates for survival from AIDS to death. In survival analysis, survival from AIDS to death was compared for different categories of length of incubation time adjusted and unadjusted for other covariates, and significant predictors for survival from AIDS to death were investigated. Survival after AIDS was not affected by the incubation time in univariate as well as in multivariate analyses. Predictive factors for progression from AIDS to death were age at seroconversion, type of AIDS diagnosis, and CD4 cell count at AIDS. The relative hazard for age at seroconversion increased 1.38-fold over 10 years. Men with a CD4 cell count at AIDS of <130 x 10(6)/l had a twofold higher risk in progression to death than men with higher CD4 cell counts. Persons diagnosed with lymphoma had a sixfold higher risk of progression to death than persons with Kaposi's sarcoma or opportunistic infections. The incubation time as well as other factors before AIDS did not affect survival after AIDS. Survival from AIDS to death can be predicted by data obtained at the time of AIDS diagnosis, such as type of diagnosis, age and CD4 cell count. AIDS seems to be a significant point in progression to death, and not just a floating point between infection and death affected by prior factors for persons who did not receive effective therapy and did not have long incubation times.

Using eye tracking technology to compare the effectiveness of malignant hyperthermia cognitive aid design.

PubMed

King, Roderick; Hanhan, Jaber; Harrison, T Kyle; Kou, Alex; Howard, Steven K; Borg, Lindsay K; Shum, Cynthia; Udani, Ankeet D; Mariano, Edward R

2018-05-15

Malignant hyperthermia is a rare but potentially fatal complication of anesthesia, and several different cognitive aids designed to facilitate a timely and accurate response to this crisis currently exist. Eye tracking technology can measure voluntary and involuntary eye movements, gaze fixation within an area of interest, and speed of visual response and has been used to a limited extent in anesthesiology. With eye tracking technology, we compared the accessibility of five malignant hyperthermia cognitive aids by collecting gaze data from twelve volunteer participants. Recordings were reviewed and annotated to measure the time required for participants to locate objects on the cognitive aid to provide an answer; cumulative time to answer was the primary outcome. For the primary outcome, there were differences detected between cumulative time to answer survival curves (P < 0.001). Participants demonstrated the shortest cumulative time to answer when viewing the Society for Pediatric Anesthesia (SPA) cognitive aid compared to four other publicly available cognitive aids for malignant hyperthermia, and this outcome was not influenced by the anesthesiologists' years of experience. This is the first study to utilize eye tracking technology in a comparative evaluation of cognitive aid design, and our experience suggests that there may be additional applications of eye tracking technology in healthcare and medical education. Potentially advantageous design features of the SPA cognitive aid include a single page, linear layout, and simple typescript with minimal use of single color blocking.

Insights on Student Aid Technology from NASFAA's 2002-2003 Technology Initiatives Committee.

ERIC Educational Resources Information Center

Cornell, Craig; Evans, Mark A.; Hallenbeck, Theodore R.; Clemente, Stephen J.; Redwine, Elaine; Croft, Devin; Lowdermilk, Todd M.

2003-01-01

This special section contains four articles on using technology to improve student financial aid services: (1) "The Technology Pyramid" (advice on the transition from paper to paperless systems); (2) "Strengthening Our Security"; (3) "COD: Moving toward a Universal Delivery System" (about the government's new Common Origin and Disbursement…

[Possibilities of use of digital imaging in forensic medicine].

PubMed

Gaval'a, P; Ivicsics, I; Mlynár, J; Novomeský, F

2005-07-01

Based on the daily practice with digital photography and documentation, the authors point out the achievements of the computer technologies implementation to the practice of forensic medicine. The modern methods of imaging, especially the digital photography, offer a wide spectrum of use in forensic medicine--the digital documentation and archivation of autopsy findings, the possibility of immediate consultation of findings with another experts via Internet, and many others. Another possibility is a creation of digital photographic atlas of forensic medicine as a useful aid in pre- and postgradual study. Thus the application of the state-of-the-art computer technologies to the forensic medicine discloses the unknown before possibilities for further development of such a discipline of human medical sciences.

A dose assessment method for arbitrary geometries with virtual reality in the nuclear facilities decommissioning

NASA Astrophysics Data System (ADS)

Chao, Nan; Liu, Yong-kuo; Xia, Hong; Ayodeji, Abiodun; Bai, Lu

2018-03-01

During the decommissioning of nuclear facilities, a large number of cutting and demolition activities are performed, which results in a frequent change in the structure and produce many irregular objects. In order to assess dose rates during the cutting and demolition process, a flexible dose assessment method for arbitrary geometries and radiation sources was proposed based on virtual reality technology and Point-Kernel method. The initial geometry is designed with the three-dimensional computer-aided design tools. An approximate model is built automatically in the process of geometric modeling via three procedures namely: space division, rough modeling of the body and fine modeling of the surface, all in combination with collision detection of virtual reality technology. Then point kernels are generated by sampling within the approximate model, and when the material and radiometric attributes are inputted, dose rates can be calculated with the Point-Kernel method. To account for radiation scattering effects, buildup factors are calculated with the Geometric-Progression formula in the fitting function. The effectiveness and accuracy of the proposed method was verified by means of simulations using different geometries and the dose rate results were compared with that derived from CIDEC code, MCNP code and experimental measurements.

Evaluating the Use of Cleft Lip and Palate 3D-Printed Models as a Teaching Aid.

PubMed

AlAli, Ahmad B; Griffin, Michelle F; Calonge, Wenceslao M; Butler, Peter E

Visualization tools are essential for effective medical education, to aid students understanding of complex anatomical systems. Three dimensional (3D) printed models are showing a wide-reaching potential in the field of medical education, to aid the interpretation of 2D imaging. This study investigates the use of 3D-printed models in educational seminars on cleft lip and palate, by comparing integrated "hands-on" student seminars, with 2D presentation seminar methods. Cleft lip and palate models were manufactured using 3D-printing technology at the medical school. Sixty-seven students from two medical schools participated in the study. The students were randomly allocated to 2 groups. Knowledge was compared between the groups using a multiple-choice question test before and after the teaching intervention. Group 1 was the control group with a PowerPoint presentation-based educational seminar and group 2 was the test group, with the same PowerPoint presentation, but with the addition of a physical demonstration using 3D-printed models of unilateral and bilateral cleft lips and palate. The level of knowledge gained was established using a preseminar and postseminar assessment, in 2 different institutions, where the addition of the 3D-printed model resulted in a significant improvement in the mean percentage of knowledge gained (44.65% test group; 32.16%; control group; p = 0.038). Student experience was assessed using a postseminar survey, where students felt the 3D-printed model significantly improved the learning experience (p = 0.005) and their visualization (p = 0.001). This study highlights the benefits of the use of 3D-printed models as visualization tools in medical education and the potential of 3D-printing technology to become a standard and effective tool in the interpretation of 2D imaging. Copyright © 2018 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

Game-Based Learning Aids in Second Life

ERIC Educational Resources Information Center

Young, William, II; Franklin, Teresa; Cooper, Tessa; Carroll, Stephen; Liu, Chang

2012-01-01

In an age of technological advancement, video games have been found to be effective teaching aids in middle school science classrooms. A National Science Foundation (NSF) project at Ohio University, known as STEAM, (Science and Technology Enrichment for Appalachian Middle Schoolers), has examined Second Life as a curriculum aid through the design,…

Self-Assessment of Hearing and Purchase of Hearing Aids by Middle-Aged and Elderly Adults

PubMed Central

Otavio, Andressa Colares da Costa; Coradini, Patricia Pérez; Teixeira, Adriane Ribeiro

2015-01-01

Introduction Presbycusis is a consequence of aging. Prescription of hearing aids is part of the treatment, although the prevalence of use by elderly people is still small. Objective To verify whether or not self-assessment of hearing is a predictor for purchase of hearing aids. Methods Quantitative, cross-sectional, descriptive, and observational study. Participants were subjects who sought a private hearing center for selection of hearing aids. During the diagnostic interview, subjects answered the following question: “On a scale of 1 to 10, with 1 being the worst and 10 the best, how would you rate your overall hearing ability?” After that, subjects underwent audiometry, selected a hearing aid, performed a home trial, and decided whether or not to purchase the hearing aid. The variables were associated and analyzed statistically. Results The sample was comprised of 32 subjects, both men and women, with a higher number of women. Mean age was 71.41 ± 12.14 years. Self-assessment of hearing ranged from 2 to 9 points. Overall, 71.9% of the subjects purchased hearing aids. There was no association between scores in the self-assessment and the purchase of hearing aids (p = 0.263). Among those who scored between 2 and 5 points, 64.7% purchased the device; between 6 and 7 points, 76.09% purchased the device; and between 8 and 9 points, 50% purchased the device, respectively. Conclusion There is evidence that low self-assessment scores lead to the purchase of hearing aids, although no significant association was observed in the sample. PMID:26722346

Communication Aids in Special Education.

ERIC Educational Resources Information Center

Education Turnkey Systems, Inc., Falls Church, VA.

One of four reports designed to assess the current state of new technologies, the document reviews the current status of technologically oriented communication aids for the handicapped. Explained are such technological aspects as the characteristics of electronically based devices which permit special students to have access to technological…

Use of Hearing Aids and Functional Capacity in Middle-Aged and Elderly Individuals

PubMed Central

Carioli, Juliana; Teixeira, Adriane Ribeiro

2014-01-01

Introduction Hearing loss is among the sensory changes strongly associated with loss of functional capacity. Objective It aims to determine whether the use of hearing aid contributes to the improvement of instrumental activities of daily living (IADL) for middle aged and elderly hearing-impaired individuals. Methods This is a descriptive, longitudinal, and interventional study. We evaluated 17 subjects, 13 (76.5%) female, aged between 58 and 96 years old (mean 77.1 ± 10.4 years). All were new users of hearing aids. Evaluation included social history, pure tone audiometry, and scale of IADL developed by Lawton and Brody. The subjects were presented daily life situations and were expected to respond if they could do them without assistance (3 points), partially assisted (2 points) or if they were unable to perform them (1 point). IADL was applied before the use of hearing aids adaptation and after a three- and six-month period of use. Results Data analysis revealed that before the use of hearing aids the average score obtained by the subjects was 22.94 ± 4.04 points. Three months after beginning the use the average score was 23.29 ± 4.12 and after six months the average score was 23.71 ± 3.69 points. Statistical analysis revealed a significant difference between scores obtained before the use of hearing aids and six months post-fitting (p = 0.015*) Conclusion The use of hearing aids among the subjects evaluated promoted positive changes in performing IADL, especially to using the telephone. PMID:25992101

Point-of-Care-Testing in Acute Stroke Management: An Unmet Need Ripe for Technological Harvest

PubMed Central

Eltzov, Evgeni; Seet, Raymond C. S.; Marks, Robert S.; Tok, Alfred I. Y.

2017-01-01

Stroke, the second highest leading cause of death, is caused by an abrupt interruption of blood to the brain. Supply of blood needs to be promptly restored to salvage brain tissues from irreversible neuronal death. Existing assessment of stroke patients is based largely on detailed clinical evaluation that is complemented by neuroimaging methods. However, emerging data point to the potential use of blood-derived biomarkers in aiding clinical decision-making especially in the diagnosis of ischemic stroke, triaging patients for acute reperfusion therapies, and in informing stroke mechanisms and prognosis. The demand for newer techniques to deliver individualized information on-site for incorporation into a time-sensitive work-flow has become greater. In this review, we examine the roles of a portable and easy to use point-of-care-test (POCT) in shortening the time-to-treatment, classifying stroke subtypes and improving patient’s outcome. We first examine the conventional stroke management workflow, then highlight situations where a bedside biomarker assessment might aid clinical decision-making. A novel stroke POCT approach is presented, which combines the use of quantitative and multiplex POCT platforms for the detection of specific stroke biomarkers, as well as data-mining tools to drive analytical processes. Further work is needed in the development of POCTs to fulfill an unmet need in acute stroke management. PMID:28771209

Evaluation of Speech Intelligibility and Sound Localization Abilities with Hearing Aids Using Binaural Wireless Technology.

PubMed

Ibrahim, Iman; Parsa, Vijay; Macpherson, Ewan; Cheesman, Margaret

2013-01-02

Wireless synchronization of the digital signal processing (DSP) features between two hearing aids in a bilateral hearing aid fitting is a fairly new technology. This technology is expected to preserve the differences in time and intensity between the two ears by co-ordinating the bilateral DSP features such as multichannel compression, noise reduction, and adaptive directionality. The purpose of this study was to evaluate the benefits of wireless communication as implemented in two commercially available hearing aids. More specifically, this study measured speech intelligibility and sound localization abilities of normal hearing and hearing impaired listeners using bilateral hearing aids with wireless synchronization of multichannel Wide Dynamic Range Compression (WDRC). Twenty subjects participated; 8 had normal hearing and 12 had bilaterally symmetrical sensorineural hearing loss. Each individual completed the Hearing in Noise Test (HINT) and a sound localization test with two types of stimuli. No specific benefit from wireless WDRC synchronization was observed for the HINT; however, hearing impaired listeners had better localization with the wireless synchronization. Binaural wireless technology in hearing aids may improve localization abilities although the possible effect appears to be small at the initial fitting. With adaptation, the hearing aids with synchronized signal processing may lead to an improvement in localization and speech intelligibility. Further research is required to demonstrate the effect of adaptation to the hearing aids with synchronized signal processing on different aspects of auditory performance.

Recent technological advancements in cardiac ultrasound imaging.

PubMed

Dave, Jaydev K; Mc Donald, Maureen E; Mehrotra, Praveen; Kohut, Andrew R; Eisenbrey, John R; Forsberg, Flemming

2018-03-01

About 92.1 million Americans suffer from at least one type of cardiovascular disease. Worldwide, cardiovascular diseases are the number one cause of death (about 31% of all global deaths). Recent technological advancements in cardiac ultrasound imaging are expected to aid in the clinical diagnosis of many cardiovascular diseases. This article provides an overview of such recent technological advancements, specifically focusing on tissue Doppler imaging, strain imaging, contrast echocardiography, 3D echocardiography, point-of-care echocardiography, 3D volumetric flow assessments, and elastography. With these advancements ultrasound imaging is rapidly changing the domain of cardiac imaging. The advantages offered by ultrasound imaging include real-time imaging, imaging at patient bed-side, cost-effectiveness and ionizing-radiation-free imaging. Along with these advantages, the steps taken towards standardization of ultrasound based quantitative markers, reviewed here, will play a major role in addressing the healthcare burden associated with cardiovascular diseases. Copyright © 2017 Elsevier B.V. All rights reserved.

Assistive Technology: What Every School Leader Should Know

ERIC Educational Resources Information Center

Dyal, Allen; Carpenter, Laura Bowden; Wright, James V.

2009-01-01

For many students with disabilities to be successful learners in the general education curriculum, they must receive supplemental aids and services. Assistive Technology commonly referred to as AT, fits both the definition of supplemental aids as well as related services for students with disabilities. Assistive Technology services and devices…

National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

ERIC Educational Resources Information Center

Heidari, Farzin

The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

Remediation of soils polluted with lindane using surfactant-aided soil washing and electrochemical oxidation.

PubMed

Muñoz-Morales, M; Braojos, M; Sáez, C; Cañizares, P; Rodrigo, M A

2017-10-05

In this work the complete treatment of soil spiked with lindane is studied using surfactant-aided soil-washing (SASW) to exhaust lindane from soil and electrolysis with diamond anodes to mineralize lindane from the soil washing fluid (SWF) waste. Results demonstrated that this technological approach is efficient and allow to remove this hazardous pollutant from soil. They also pointed out the significance of the ratio surfactant/soil in the efficiency of the SASW process and in the performance of the later electrolysis used to mineralize the pollutant. Larger values of this parameter lead to effluents that undergo a very efficient treatment which allows the depletion of lindane for applied charges lower than 15AhL -1 and the recovery of more than 70% of the surfactant for the regeneration of the SWF. Copyright © 2017 Elsevier B.V. All rights reserved.

Centrifugo-Magnetophoretic Purification of CD4+ Cells from Whole Blood Toward Future HIV/AIDS Point-of-Care Applications.

PubMed

Glynn, Macdara; Kirby, Daniel; Chung, Danielle; Kinahan, David J; Kijanka, Gregor; Ducrée, Jens

2014-06-01

In medical diagnostics, detection of cells exhibiting specific phenotypes constitutes a paramount challenge. Detection technology must ensure efficient isolation of (often rare) targets while eliminating nontarget background cells. Technologies exist for such investigations, but many require high levels of expertise, expense, and multistep protocols. Increasing automation, miniaturization, and availability of such technologies is an aim of microfluidic lab-on-a-chip strategies. To this end, we present an integrated, dual-force cellular separation strategy using centrifugo-magnetophoresis. Whole blood spiked with target cells is incubated with (super-)paramagnetic microparticles that specifically bind phenotypic markers on target cells. Under rotation, all cells sediment into a chamber located opposite a co-rotating magnet. Unbound cells follow the radial vector, but under the additional attraction of the lateral magnetic field, bead-bound target cells are deflected to a designated reservoir. This multiforce separation is continuous and low loss. We demonstrate separation efficiently up to 92% for cells expressing the HIV/AIDS relevant epitope (CD4) from whole blood. Such highly selective separation systems may be deployed for accurate diagnostic cell isolations from biological samples such as blood. Furthermore, this high efficiency is delivered in a cheap and simple device, thus making it an attractive option for future deployment in resource-limited settings. © 2013 Society for Laboratory Automation and Screening.

Strategies for Overcoming Obstacles in AIDS Education for Preteens.

ERIC Educational Resources Information Center

Rodrick-Athans, Linda; Bhavnagri, Navaz Peshotan

1997-01-01

Points out that every four months the number of reported AIDS cases among adolescents doubles. Describes and evaluates a comprehensive AIDS prevention education program for preteens. Identifies adolescent attitudes as barriers to effective AIDS education. Presents strategies to break down barriers and promote acceptance of AIDS education,…

The Impact of Machine Translation and Computer-aided Translation on Translators

NASA Astrophysics Data System (ADS)

Peng, Hao

2018-03-01

Under the context of globalization, communications between countries and cultures are becoming increasingly frequent, which make it imperative to use some techniques to help translate. This paper is to explore the influence of computer-aided translation on translators, which is derived from the field of the computer-aided translation (CAT) and machine translation (MT). Followed by an introduction to the development of machine and computer-aided translation, it then depicts the technologies practicable to translators, which are trying to analyze the demand of designing the computer-aided translation so far in translation practice, and optimize the designation of computer-aided translation techniques, and analyze its operability in translation. The findings underline the advantages and disadvantages of MT and CAT tools, and the serviceability and future development of MT and CAT technologies. Finally, this thesis probes into the impact of these new technologies on translators in hope that more translators and translation researchers can learn to use such tools to improve their productivity.

How do patients between the age of 65 and 75 use a web-based decision aid for treatment choice in localized prostate cancer?

PubMed

Schrijvers, Jessie; Vanderhaegen, Joke; Van Poppel, Hendrik; Haustermans, Karin; Van Audenhove, Chantal

2013-08-01

This study was designed to evaluate the use of a web-based decision aid by a 65plus patient group in their decision-making process for treatment of localized prostate cancer. Of particular interest was the use of technology features such as patients' statements, comparative tables, and a values clarification tool. One hundred men from the University Hospital of Leuven campus, Gasthuisberg, were invited to use the web-based decision aid in their decision-making process. Twenty-six men were excluded based on non- or limited use of the decision aid. Of the remaining 74 men, user specifications, decision aid surfing characteristics by means of web-log data, and especially the use of technology features were analyzed. Men spent on average 30 minutes on the web-based decision aid. Most time was spent on the pages with information on treatment options. These pages were also most frequently accessed. The use of the feature 'comparative tables' was the highest, followed by the 'values clarification tool'. According to age (<70 or >70 years) differences were observed for the time spent on the decision aid, the pages accessed, and the use of the technology features. Despite concerns about the usability of a web-based decision aid for elderly patients, these results indicated that the majority of 65plus persons with good internet skills use a web-based decision aid as well as its incorporated technology features. © 2013 Wiley Publishing Asia Pty Ltd and Chinese Cochrane Center, West China Hospital of Sichuan University.

The Impact of Numerical Control Technology and Computer Aided Manufacturing on Curriculum Development in Industrial Education and Technology. A Final Report.

ERIC Educational Resources Information Center

Bauch, Klaus Dieter

The study was designed to investigate the effects of Numerical Control Technology and Computer-Aided Manufacturing (NC/CAM) in American industry on industrial education and engineering technology education. The specific purpose was to identify a data base and rationale for curriculum development in NC/CAM through a comparison of views by…

Technology and Speech Training: An Affair to Remember.

ERIC Educational Resources Information Center

Levitt, Harry

1989-01-01

A history of speech training technology is presented, from the simple hand-held mirror to complicated computer-based systems and tactile devices, and subsequent papers in this theme issue are introduced. Both the advantages and problems of technological aids are addressed. Simplicity in the application and use of speech training aids is stressed.…

AB119. Computer-aided facial recognition of Chinese individuals with 22q11.2 deletion-algorithm training using NIH atlas of human malformation syndromes from diverse population

PubMed Central

Mok, Gary Tsz Kin; Chung, Brian Hon-Yin

2017-01-01

Background 22q11.2 deletion syndrome (22q11.2DS) is a common genetic disorder with an estimated frequency of 1/4,000. It is a multi-systemic disorder with high phenotypic variability. Our previous work showed substantial under-diagnosis of 22q11.2DS as 1 in 10 adult patients with conotruncal defects were found to have 22q11.2DS. The National Institute of Health (NIH) has created an atlas of human malformation syndrome from diverse populations to provide an easy tool to assist clinician in diagnosing the syndromic across various populations. In this study, we seek to determine whether training the computer-aided facial recognition technology using images from ethnicity-matched patients from the NIH Atlas can improve the detection performance of this technology. Methods Clinical photographs of 16 Chinese subjects with molecularly confirmed 22q11.2DS, from the NIH atlas and its related publication were used for training the facial recognition technology. The system automatically localizes hundreds of facial fiducial points and takes measurements. The final classification is based on these measurements, as well as an estimated probability of subjects having 22q11.2DS based on the entire facial image. Clinical photographs of 7 patients with molecularly confirmed 22q11.2DS were obtained with informed consent and used for testing the performance in recognizing facial profiles of the Chinese subjects before and after training. Results All 7 test cases were improved in ranking and scoring after the software training. In 4 cases, 22q11.2DS did not appear as one possible syndrome match before the training; however, it appeared within the first 10 syndrome matches after training. Conclusions The present pilot data shows that this technology can be trained to recognize patients with 22q11.2DS. It also highlights the need to collect clinical photographs of patients from diverse populations to be used as resources for training the software which can lead to improvement of the performance of computer-aided facial recognition technology.

Evaluation of Speech Intelligibility and Sound Localization Abilities with Hearing Aids Using Binaural Wireless Technology

PubMed Central

Ibrahim, Iman; Parsa, Vijay; Macpherson, Ewan; Cheesman, Margaret

2012-01-01

Wireless synchronization of the digital signal processing (DSP) features between two hearing aids in a bilateral hearing aid fitting is a fairly new technology. This technology is expected to preserve the differences in time and intensity between the two ears by co-ordinating the bilateral DSP features such as multichannel compression, noise reduction, and adaptive directionality. The purpose of this study was to evaluate the benefits of wireless communication as implemented in two commercially available hearing aids. More specifically, this study measured speech intelligibility and sound localization abilities of normal hearing and hearing impaired listeners using bilateral hearing aids with wireless synchronization of multichannel Wide Dynamic Range Compression (WDRC). Twenty subjects participated; 8 had normal hearing and 12 had bilaterally symmetrical sensorineural hearing loss. Each individual completed the Hearing in Noise Test (HINT) and a sound localization test with two types of stimuli. No specific benefit from wireless WDRC synchronization was observed for the HINT; however, hearing impaired listeners had better localization with the wireless synchronization. Binaural wireless technology in hearing aids may improve localization abilities although the possible effect appears to be small at the initial fitting. With adaptation, the hearing aids with synchronized signal processing may lead to an improvement in localization and speech intelligibility. Further research is required to demonstrate the effect of adaptation to the hearing aids with synchronized signal processing on different aspects of auditory performance. PMID:26557339

Evolving Understanding of the CLL Genome

PubMed Central

Gruber, Michaela; Wu, Catherine J.

2014-01-01

Over the past few years, massively parallel sequencing technologies have revealed with high resolution the tremendous genetic and epigenetic heterogeneity in chronic lymphocytic leukemia (CLL). We have learned how the molecular architecture differs not only between affected individuals but also within samples and over time. These insights have catalyzed our understanding of the pathobiology of CLL and point to critical signaling pathways in the development and progression of the disease. Several key driver alterations have been identified, which serve to refine prognostic schemata but also inspire the development of new therapeutic strategies. Ongoing advances in technology promise to further elucidate the molecular basis of CLL, and this knowledge is anticipated to aid us in understanding and addressing the clinical challenge presented by the vast variability in the clinical course of patients with CLL. PMID:25048782

A Qualitative Case Study of Smartphone-Connected Hearing Aids: Influences on Patients, Clinicians, and Patient-Clinician Interactions.

PubMed

Ng, Stella L; Phelan, Shanon; Leonard, MaryAnn; Galster, Jason

2017-06-01

Innovations in hearing aid technology influence clinicians and individuals who use hearing aids. Little research, to date, explains the innovation adoption experiences and perspectives of clinicians and patients, which matter to a field like audiology, wherein technology innovation is constant. By understanding clinician and patient experiences with such innovations, the field of audiology may develop technologies and ways of practicing in a manner more responsive to patients' needs, and attentive to society's influence. The authors aimed to understand how new innovations influence clinician and patient experiences, through a study focusing on connected hearing aids. "Connected" refers to the wireless functional connection of hearing aids with everyday technologies like mobile phones and tablets. The authors used a qualitative collective case study methodology, borrowing from constructivist grounded theory for data collection and analysis methods. Specifically, the authors designed a collective case study of a connected hearing aid and smartphone application, composed of two cases of experience with the innovation: the case of clinician experiences, and the case of patient experiences. The qualitative sampling methods employed were case sampling, purposive within-case sampling, and theoretical sampling, and culminated in a total collective case n = 19 (clinician case n = 8; patient case n = 11). These data were triangulated with a supplementary sample of ten documents: relevant news and popular media collected during the study time frame. The authors conducted interviews with the patients and clinicians, and analyzed the interview and document data using the constant comparative method. The authors compared their two cases by looking at trends within, between, and across cases. The clinician case highlighted clinicians' heuristic-based candidacy judgments in response to the adoption of the connected hearing aids into their practice. The patient case revealed patients' perceptions of themselves as technologically competent or incompetent, and descriptions of how they learned to use the new technology. Between cases, the study found a difference in the response to how the connected hearing aid changed the clinician-patient relationship. While clinicians valued the increased time they spent "getting to know" their patients, patients experienced some frustration specific to the additional troubleshooting related to Bluetooth connectivity. Across cases, there was a resounding theme of "normalization" of hearing aids via their integration with a "normal" technology (mobile phones) and general lack of concern about privacy in relation to the smartphone application and its tracking and geotagging features. Both audiologists and patients credited the connected hearing aids with increased opportunities to participate more fully in everyday life. The introduction of smartphone-connected hearing aids influenced the identities and candidate profiles of hearing aid users, and the nature of time spent in clinical interactions, in important and interesting ways. The influence of connected hearing aids on patient experience and audiology practice calls for continued research and clinical consideration, with implications for clinical decision-making regarding hearing aid candidacy. Further study should look critically at normalization and possible unintended stigmatizing effects of making hearing aids increasingly discreet. American Academy of Audiology

Distance learning ects and flipped classroom in the anatomy learning: comparative study of the use of augmented reality, video and notes.

PubMed

Ferrer-Torregrosa, Javier; Jiménez-Rodríguez, Miguel Ángel; Torralba-Estelles, Javier; Garzón-Farinós, Fernanda; Pérez-Bermejo, Marcelo; Fernández-Ehrling, Nadia

2016-09-01

The establishment of the ECTS (European Credit Transfer System) is one of the pillars of the European Space of Higher Education. This way of accounting for the time spent in training has two essential parts, classroom teaching (work with the professor) and distance learning (work without the professor, whether in an individual or collective way). Much has been published on the distance learning part, but less on the classroom teaching section. In this work, the authors investigate didactic strategies and associated aids for distance learning work in a concept based on flipped classroom where transmitting information is carried out with aids that the professor prepares, so that the student works in an independent way before the classes, thus being able to dedicate the classroom teaching time to more complex learning and being able to count on the professor's help. Three teaching aids applied to the study of anatomy have been compared: Notes with images, videos, and augmented reality. Four dimensions have been compared: the time spent, the acquired learnings, the metacognitive perception, and the prospects of the use of augmented reality for study. The results show the effectiveness, in all aspects, of augmented reality when compared with the rest of aids. The questionnaire assessed the acquired knowledge through a course exam, where 5.60 points were obtained for the notes group, 6.54 for the video group, and 7.19 for the augmented reality group. That is 0.94 more points for the video group compared with the notes and 1.59 more points for the augmented reality group compared with the notes group. This research demonstrates that, although technology has not been sufficiently developed for education, it is expected that it can be improved in both the autonomous work of the student and the academic training of health science students and that we can teach how to learn. Moreover, one can see how the grades of the students who studied with augmented reality are more grouped and that there is less dispersion in the marks compared with other materials.

Identification of underground mine workings with the use of global positioning system technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Canty, G.A.; Everett, J.W.; Sharp, M.

1998-12-31

Identification of underground mine workings for well drilling is a difficult task given the limited resources available and lack of reliable information. Relic mine maps of questionable accuracy and difficulty in correlating the subsurface to the surface, make the process of locating wells arduous. With the development of global positioning system (GPS), specific locations on the earth can be identified with the aid of satellites. This technology can be applied to mine workings identification given a few necessary, precursory details. For an abandoned mine treatment project conducted by the University of Oklahoma, in conjunction with the Oklahoma Conservation Commission, amore » Trimble ProXL 8 channel GPS receiver was employed to locate specific points on the surface with respect to a mine map. A 1925 mine map was digitized into AutoCAD version 13 software. Surface features identified on the map, such as mine adits, were located and marked in the field using the GPS receiver. These features were than imported into AutoCAD and referenced with the same points drawn on the map. A rubber sheeting program, Multric, was used to tweak the points so the map features correlated with the surface points. The correlation of these features allowed the map to be geo-referenced with the surface. Specific drilling points were located on the digitized map and assigned a latitude and longitude. The GPS receiver, using real time differential correction, was used to locate these points in the field. This method was assumed to be relatively accurate, to within 5 to 15 feet.« less

Technology transfer of hearing aids to low and middle income countries: policy and market factors.

PubMed

Seelman, Katherine D; Werner, Roye

2014-09-01

The competitive market advantages of industry and the balancing force of international governmental organizations (IGOs) are examined to identify market and policy in support of sustainable technology transfer of hearing aids to low and middle income countries. A second purpose is to examine the usefulness of findings for other assistive technologies (AT). Searches of electronic databases, IGO documents, industry reports and journals were supplemented by informal discussions with industry and IGO staff and audiologists. The value chain is used to examine the competitive advantage of industry and the balancing tools of certain IGOs. Both industry and IGOs engage in intellectual property (IP) and competition activities and are active in each segment of the hearing aid value chain. Their market and policy objectives and strategies are different. IGOs serve as balancing forces for the competitive advantages of industry. The hearing aid market configuration and hearing aid fitting process are not representative of other AT products but IP, trade and competition policy tools used by IGOs and governments are relevant to other AT. The value chain is a useful tool to identify the location of price mark-ups and the influence of actors. Market factors and reimbursement and subsidization policies drive hearing aid innovation. UN-related international government organization activities are responsive to the needs of disability populations who cannot afford assistive technology. Policy tools used by international governmental organizations are applicable across assistive technology. A partnership model is important to distribution of hearing aids to low and middle income countries.

Microfluidics in Malignant Glioma Research and Precision Medicine

PubMed Central

Logun, Meghan; Zhao, Wujun

2018-01-01

Glioblastoma multiforme (GBM) is an aggressive form of brain cancer that has no effective treatments and a prognosis of only 12–15 months. Microfluidic technologies deliver microscale control of fluids and cells, and have aided cancer therapy as point-of-care devices for the diagnosis of breast and prostate cancers. However, a few microfluidic devices are developed to study malignant glioma. The ability of these platforms to accurately replicate the complex microenvironmental and extracellular conditions prevailing in the brain and facilitate the measurement of biological phenomena with high resolution and in a high-throughput manner could prove useful for studying glioma progression. These attributes, coupled with their relatively simple fabrication process, make them attractive for use as point-of-care diagnostic devices for detection and treatment of GBM. Here, the current issues that plague GBM research and treatment, as well as the current state of the art in glioma detection and therapy, are reviewed. Finally, opportunities are identified for implementing microfluidic technologies into research and diagnostics to facilitate the rapid detection and better therapeutic targeting of GBM. PMID:29780878

Mechanisms for Aiding Worker Adjustment to Technological Change: Volume 2: Concepts, Review of the Literature, Abstracts.

ERIC Educational Resources Information Center

Utah Univ., Salt Lake City. Human Resources Inst.

Volume 2, which accompanies "Mechanisms for Aiding Worker Adjustment to Technological Change, Volume 1," consists of a key word index for locating specific topics and the abstracts of literature reviewed in Volume 1. Key words, referring to aspects of worker adjustment to technological change appearing in the abstracted literature, are grouped…

INNOVATIVE TECHNOLOGY VERIFICATION REPORT "FIELD MEASUREMENT TECHNOLOGIES FOR TOTAL PETROLEUM HYDROCARBONS IN SOIL" CHEMETRICS, INC., AND AZUR ENVIRONMENTAL LTD REMEDIAID TOTAL PETROLEUM HYDROCARBON STARTER KIT

EPA Science Inventory

The RemediAidTm Total Petroleum Hydrocarbon Starter Kit (RemediAidTm kit) developed by CHEMetries, Inc. (CHEMetrics), and AZUR Environmental Ltd was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the ...

Categorisation of Colour Terms Using New Validation Tools: A Case Study and Implications

PubMed Central

Arbab, Shabnam; Brindle, Jonathan A.; Matusiak, Barbara S.; Klöckner, Christian A.

2018-01-01

This article elaborates on the results of a field experiment conducted among speakers of the Chakali language, spoken in northern Ghana. In the original study, the Color-aid Corporation Chart was used to perform the focal task in which consultants were asked to point at a single colour tile on the chart. However, data from the focal task could not be analysed since the Color-aid tiles had not yet been converted into numerical values set forth by the Commission internationale de l’éclairage (CIE). In this study, the full set of 314 Color-aid tiles were measured for chromaticity and converted into the CIE values at the Daylight Laboratory of the Norwegian University of Science and Technology. This article presents the conversion methodology and makes the results of the measurements, which are available in the Online Appendix. We argue that some visual-perception terms cannot be reliably ascribed to colour categories established by the Color-aid Corporation. This suggests that the ideophonic expressions in the dataset do not denote ‘colours’, as categorised in the Color-aid system, as it was impossible to average the consultants’ data into a CIE chromaticity diagram, illustrate the phenomena on the Natural Colour System (NCS) Circle and Triangle diagrams, and conduct a statistical analysis. One of the implications of this study is that a line between a visual-perception term and a colour term could be systematically established using a method with predefined categorical thresholds. PMID:29755718

Categorisation of Colour Terms Using New Validation Tools: A Case Study and Implications.

PubMed

Arbab, Shabnam; Brindle, Jonathan A; Matusiak, Barbara S; Klöckner, Christian A

2018-01-01

This article elaborates on the results of a field experiment conducted among speakers of the Chakali language, spoken in northern Ghana. In the original study, the Color-aid Corporation Chart was used to perform the focal task in which consultants were asked to point at a single colour tile on the chart. However, data from the focal task could not be analysed since the Color-aid tiles had not yet been converted into numerical values set forth by the Commission internationale de l'éclairage (CIE). In this study, the full set of 314 Color-aid tiles were measured for chromaticity and converted into the CIE values at the Daylight Laboratory of the Norwegian University of Science and Technology. This article presents the conversion methodology and makes the results of the measurements, which are available in the Online Appendix. We argue that some visual-perception terms cannot be reliably ascribed to colour categories established by the Color-aid Corporation. This suggests that the ideophonic expressions in the dataset do not denote 'colours', as categorised in the Color-aid system, as it was impossible to average the consultants' data into a CIE chromaticity diagram, illustrate the phenomena on the Natural Colour System (NCS) Circle and Triangle diagrams, and conduct a statistical analysis. One of the implications of this study is that a line between a visual-perception term and a colour term could be systematically established using a method with predefined categorical thresholds.

Evolution of technology in teaching: Blackboard and beyond in Medical Education

PubMed Central

Mendis, Susirith; John, Lisha Jenny; Shanthakumari, Nisha; Sreedharan, Jayadevan; Shaikh, Rizwana B

2016-01-01

Teaching and learning the passing of knowledge from one generation to another - has been in existence from the earliest times of human civilization. It began in 1801, with a large piece of slate hung on the wall in a school in Scotland to provide information to a large audience at one time. In the US by mid-19th century, every class room had a blackboard to teach students. The modern version of the blackboard is either green or brown board. This was introduced in late 1960s. The whiteboards came into use during the late 1980s. Projected aids have been used since 1420. The various devices used are the epidiascope, slide projector, overhead projector for transparencies and the micro projector. An instrument to project images from a horizontal surface onto a vertical screen was invented in the 1870s. By the 1960s, transparencies were in use in classrooms. The ‘Hyalotype’, a transparent image of a photograph using actual black and white photographs on a glass slide that could be projected was invented in 1851. By 1916, the German company Agfa started producing colored lantern slides. The first version of PowerPoint was released by Microsoft in the year 1990. Cell phones, palmtops, and handheld computers; tablets, laptops, and media players are included under mobile learning devices. With the evolution of technology, students achieved competence and interested in interactive learning. The education industry has moved from distance learning to e-learning and finally to m-learning as knowledge expanded exponentially and the demand escalated. While using teaching aids with advanced technology, we must not forget the lessons from the past, striking a balance between embracing new methods of teaching and learning while upholding the timeless principles of education. The newer educational technology can be part of a comprehensive system for lifelong education. Conclusion: Use of technology in education has come a long way since the earliest times of human civilization. While embarking on aids with advanced technology, we need to take full cognizance of the lessons from the past, striking a balance between embracing new methods of teaching and learning while holding on to the timeless principles of education. Thus, the newer educational technology can be effective tools of teaching and learning in this rapidly changing technological world and be part of a comprehensive system for lifelong education. Acknowledgements: The authors wish to acknowledge Prof. Raja Bandaranayake for his valuable suggestions and editing this manuscript. PMID:27822404

Evolution of technology in teaching: Blackboard and beyond in Medical Education.

PubMed

Muttappallymyalil, Jayakumary; Mendis, Susirith; John, Lisha Jenny; Shanthakumari, Nisha; Sreedharan, Jayadevan; Shaikh, Rizwana B

2016-10-01

the passing of knowledge from one generation to another - has been in existence from the earliest times of human civilization. It began in 1801, with a large piece of slate hung on the wall in a school in Scotland to provide information to a large audience at one time. In the US by mid-19th century, every class room had a blackboard to teach students. The modern version of the blackboard is either green or brown board. This was introduced in late 1960s. The whiteboards came into use during the late 1980s. Projected aids have been used since 1420. The various devices used are the epidiascope, slide projector, overhead projector for transparencies and the micro projector. An instrument to project images from a horizontal surface onto a vertical screen was invented in the 1870s. By the 1960s, transparencies were in use in classrooms. The 'Hyalotype', a transparent image of a photograph using actual black and white photographs on a glass slide that could be projected was invented in 1851. By 1916, the German company Agfa started producing colored lantern slides. The first version of PowerPoint was released by Microsoft in the year 1990. Cell phones, palmtops, and handheld computers; tablets, laptops, and media players are included under mobile learning devices. With the evolution of technology, students achieved competence and interested in interactive learning. The education industry has moved from distance learning to e-learning and finally to m-learning as knowledge expanded exponentially and the demand escalated. While using teaching aids with advanced technology, we must not forget the lessons from the past, striking a balance between embracing new methods of teaching and learning while upholding the timeless principles of education. The newer educational technology can be part of a comprehensive system for lifelong education. Use of technology in education has come a long way since the earliest times of human civilization. While embarking on aids with advanced technology, we need to take full cognizance of the lessons from the past, striking a balance between embracing new methods of teaching and learning while holding on to the timeless principles of education. Thus, the newer educational technology can be effective tools of teaching and learning in this rapidly changing technological world and be part of a comprehensive system for lifelong education. The authors wish to acknowledge Prof. Raja Bandaranayake for his valuable suggestions and editing this manuscript.

Fixed-point Design of the Lattice-reduction-aided Iterative Detection and Decoding Receiver for Coded MIMO Systems

DTIC Science & Technology

2011-01-01

reliability, e.g., Turbo Codes [2] and Low Density Parity Check ( LDPC ) codes [3]. The challenge to apply both MIMO and ECC into wireless systems is on...REPORT Fixed-point Design of theLattice-reduction-aided Iterative Detection andDecoding Receiver for Coded MIMO Systems 14. ABSTRACT 16. SECURITY...illustrates the performance of coded LR aided detectors. 1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 13. SUPPLEMENTARY NOTES The views, opinions

Visualizing medium and biodistribution in complex cell culture bioreactors using in vivo imaging.

PubMed

Ratcliffe, E; Thomas, R J; Stacey, A J

2014-01-01

There is a dearth of technology and methods to aid process characterization, control and scale-up of complex culture platforms that provide niche micro-environments for some stem cell-based products. We have demonstrated a novel use of 3d in vivo imaging systems to visualize medium flow and cell distribution within a complex culture platform (hollow fiber bioreactor) to aid characterization of potential spatial heterogeneity and identify potential routes of bioreactor failure or sources of variability. This can then aid process characterization and control of such systems with a view to scale-up. Two potential sources of variation were observed with multiple bioreactors repeatedly imaged using two different imaging systems: shortcutting of medium between adjacent inlet and outlet ports with the potential to create medium gradients within the bioreactor, and localization of bioluminescent murine 4T1-luc2 cells upon inoculation with the potential to create variable seeding densities at different points within the cell growth chamber. The ability of the imaging technique to identify these key operational bioreactor characteristics demonstrates an emerging technique in troubleshooting and engineering optimization of bioreactor performance. © 2013 American Institute of Chemical Engineers.

Software Tools for Shipbuilding Productivity

DTIC Science & Technology

1984-12-01

shipbuilding, is that design, manufacturing and robotic technology applications to shipbuilding have been proven. all aspects of shipbuilding is now a task...technical information about the process of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM) effectively has been a problem of serious and...Design (CAD) 3.4.1 CAD System Components 3.4.2 CAD System Benefits 3.4.3 New and Future CAD Technologies Computer Aided Manufacturing (CAM) 3.5.1 CAM

[Research and application of computer-aided technology in restoration of maxillary defect].

PubMed

Cheng, Xiaosheng; Liao, Wenhe; Hu, Qingang; Wang, Qian; Dai, Ning

2008-08-01

This paper presents a new method of designing restoration model of maxillectomy defect through Computer aided technology. Firstly, 3D maxillectomy triangle mesh model is constructed from Helical CT data. Secondly, the triangle mesh model is transformed into initial computer-aided design (CAD) model of maxillectomy through reverse engineering software. Thirdly, the 3D virtual restoration model of maxillary defect is obtained after designing and adjusting the initial CAD model through CAD software according to the patient's practical condition. Therefore, the 3D virtual restoration can be fitted very well with the broken part of maxilla. The exported design data can be manufactured using rapid prototyping technology and foundry technology. Finally, the result proved that this method is effective and feasible.

Operational analysis for the drug detection problem

NASA Astrophysics Data System (ADS)

Hoopengardner, Roger L.; Smith, Michael C.

1994-10-01

New techniques and sensors to identify the molecular, chemical, or elemental structures unique to drugs are being developed under several national programs. However, the challenge faced by U.S. drug enforcement and Customs officials goes far beyond the simple technical capability to detect an illegal drug. Entry points into the U.S. include ports, border crossings, and airports where cargo ships, vehicles, and aircraft move huge volumes of freight. Current technology and personnel are able to physically inspect only a small fraction of the entering cargo containers. The complexities of how to best utilize new technology to aid the detection process and yet not adversely affect the processing of vehicles and time-sensitive cargo is the challenge faced by these officials. This paper describes an ARPA sponsored initiative to develop a simple, yet useful, method for examining the operational consequences of utilizing various procedures and technologies in combination to achieve an `acceptable' level of detection probability. Since Customs entry points into the U.S. vary from huge seaports to a one lane highway checkpoint between the U.S. and Canadian or Mexico border, no one system can possibly be right for all points. This approach can examine alternative concepts for using different techniques/systems for different types of entry points. Operational measures reported include the average time to process vehicles and containers, the average and maximum numbers in the system at any time, and the utilization of inspection teams. The method is implemented via a PC-based simulation written in GPSS-PC language. Input to the simulation model is (1) the individual detection probabilities and false positive rates for each detection technology or procedure, (2) the inspection time for each procedure, (3) the system configuration, and (4) the physical distance between inspection stations. The model offers on- line graphics to examine effects as the model runs.

Dental students' preferences and performance in crown design: conventional wax-added versus CAD.

PubMed

Douglas, R Duane; Hopp, Christa D; Augustin, Marcus A

2014-12-01

The purpose of this study was to evaluate dental students' perceptions of traditional waxing vs. computer-aided crown design and to determine the effectiveness of either technique through comparative grading of the final products. On one of twoidentical tooth preparations, second-year students at one dental school fabricated a wax pattern for a full contour crown; on the second tooth preparation, the same students designed and fabricated an all-ceramic crown using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology. Projects were graded for occlusion and anatomic form by three faculty members. On completion of the projects, 100 percent of the students (n=50) completed an eight-question, five-point Likert scalesurvey, designed to assess their perceptions of and learning associated with the two design techniques. The average grades for the crown design projects were 78.3 (CAD) and 79.1 (wax design). The mean numbers of occlusal contacts were 3.8 (CAD) and 2.9(wax design), which was significantly higher for CAD (p=0.02). The survey results indicated that students enjoyed designing afull contour crown using CAD as compared to using conventional wax techniques and spent less time designing the crown using CAD. From a learning perspective, students felt that they learned more about position and the size/strength of occlusal contacts using CAD. However, students recognized that CAD technology has limits in terms of representing anatomic contours and excursive occlusion compared to conventional wax techniques. The results suggest that crown design using CAD could be considered as an adjunct to conventional wax-added techniques in preclinical fixed prosthodontic curricula.

Types of Hearing Aids

MedlinePlus

... hearing impairment. Most hearing aids share several similar electronic components, including a microphone that picks up sound; ... the ear canal; and batteries that power the electronic parts. Hearing aids differ by: design technology used ...

The National NeuroAIDS Tissue Consortium (NNTC) Database: an integrated database for HIV-related studies.

PubMed

Cserhati, Matyas F; Pandey, Sanjit; Beaudoin, James J; Baccaglini, Lorena; Guda, Chittibabu; Fox, Howard S

2015-01-01

We herein present the National NeuroAIDS Tissue Consortium-Data Coordinating Center (NNTC-DCC) database, which is the only available database for neuroAIDS studies that contains data in an integrated, standardized form. This database has been created in conjunction with the NNTC, which provides human tissue and biofluid samples to individual researchers to conduct studies focused on neuroAIDS. The database contains experimental datasets from 1206 subjects for the following categories (which are further broken down into subcategories): gene expression, genotype, proteins, endo-exo-chemicals, morphometrics and other (miscellaneous) data. The database also contains a wide variety of downloadable data and metadata for 95 HIV-related studies covering 170 assays from 61 principal investigators. The data represent 76 tissue types, 25 measurement types, and 38 technology types, and reaches a total of 33,017,407 data points. We used the ISA platform to create the database and develop a searchable web interface for querying the data. A gene search tool is also available, which searches for NCBI GEO datasets associated with selected genes. The database is manually curated with many user-friendly features, and is cross-linked to the NCBI, HUGO and PubMed databases. A free registration is required for qualified users to access the database. © The Author(s) 2015. Published by Oxford University Press.

The National NeuroAIDS Tissue Consortium (NNTC) Database: an integrated database for HIV-related studies

PubMed Central

Cserhati, Matyas F.; Pandey, Sanjit; Beaudoin, James J.; Baccaglini, Lorena; Guda, Chittibabu; Fox, Howard S.

2015-01-01

We herein present the National NeuroAIDS Tissue Consortium-Data Coordinating Center (NNTC-DCC) database, which is the only available database for neuroAIDS studies that contains data in an integrated, standardized form. This database has been created in conjunction with the NNTC, which provides human tissue and biofluid samples to individual researchers to conduct studies focused on neuroAIDS. The database contains experimental datasets from 1206 subjects for the following categories (which are further broken down into subcategories): gene expression, genotype, proteins, endo-exo-chemicals, morphometrics and other (miscellaneous) data. The database also contains a wide variety of downloadable data and metadata for 95 HIV-related studies covering 170 assays from 61 principal investigators. The data represent 76 tissue types, 25 measurement types, and 38 technology types, and reaches a total of 33 017 407 data points. We used the ISA platform to create the database and develop a searchable web interface for querying the data. A gene search tool is also available, which searches for NCBI GEO datasets associated with selected genes. The database is manually curated with many user-friendly features, and is cross-linked to the NCBI, HUGO and PubMed databases. A free registration is required for qualified users to access the database. Database URL: http://nntc-dcc.unmc.edu PMID:26228431

Society for College Science Teachers: High Technology.

ERIC Educational Resources Information Center

Menefee, Robert

1983-01-01

Presents findings of a study group on high technology charged with determining a definition, assessing current educational response, and examining implications for the future. Topics addressed include: super-techs; computer-aided design/computer-aided manufacture (CAD/CAM); structural unemployment; a two-plus-two curriculum; and educational…

An Intelligent Computer-aided Training System (CAT) for Diagnosing Adult Illiterates: Integrating NASA Technology into Workplace Literacy

NASA Technical Reports Server (NTRS)

Yaden, David B., Jr.

1991-01-01

An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application being developed is The Adult Literacy Evaluator, a simulation-based diagnostic tool designed to assess the operant literacy abilities of adults having difficulties in learning to read and write. Using Intelligent Computer-Aided Training (ICAT) system technology in addition to speech recognition, closed-captioned television (CCTV), live video and other state-of-the-art graphics and storage capabilities, this project attempts to overcome the negative effects of adult literacy assessment by allowing the client to interact with an intelligent computer system which simulates real-life literacy activities and materials and which measures literacy performance in the actual context of its use. The specific objectives of the project are as follows: (1) to develop a simulation-based diagnostic tool to assess adults' prior knowledge about reading and writing processes in actual contexts of application; (2) to provide a profile of readers' strengths and weaknesses; and (3) to suggest instructional strategies and materials which can be used as a beginning point for remediation. In the first and development phase of the project, descriptions of literacy events and environments are being written and functional literacy documents analyzed for their components. From these descriptions, scripts are being generated which define the interaction between the student, an on-screen guide and the simulated literacy environment.

Information Systems for NASA's Aeronautics and Space Enterprises

NASA Technical Reports Server (NTRS)

Kutler, Paul

1998-01-01

The aerospace industry is being challenged to reduce costs and development time as well as utilize new technologies to improve product performance. Information technology (IT) is the key to providing revolutionary solutions to the challenges posed by the increasing complexity of NASA's aeronautics and space missions and the sophisticated nature of the systems that enable them. The NASA Ames vision is to develop technologies enabling the information age, expanding the frontiers of knowledge for aeronautics and space, improving America's competitive position, and inspiring future generations. Ames' missions to accomplish that vision include: 1) performing research to support the American aviation community through the unique integration of computation, experimentation, simulation and flight testing, 2) studying the health of our planet, understanding living systems in space and the origins of the universe, developing technologies for space flight, and 3) to research, develop and deliver information technologies and applications. Information technology may be defined as the use of advance computing systems to generate data, analyze data, transform data into knowledge and to use as an aid in the decision-making process. The knowledge from transformed data can be displayed in visual, virtual and multimedia environments. The decision-making process can be fully autonomous or aided by a cognitive processes, i.e., computational aids designed to leverage human capacities. IT Systems can learn as they go, developing the capability to make decisions or aid the decision making process on the basis of experiences gained using limited data inputs. In the future, information systems will be used to aid space mission synthesis, virtual aerospace system design, aid damaged aircraft during landing, perform robotic surgery, and monitor the health and status of spacecraft and planetary probes. NASA Ames through the Center of Excellence for Information Technology Office is leading the effort in pursuit of revolutionary, IT-based approaches to satisfying NASA's aeronautics and space requirements. The objective of the effort is to incorporate information technologies within each of the Agency's four Enterprises, i.e., Aeronautics and Space Transportation Technology, Earth, Science, Human Exploration and Development of Space and Space Sciences. The end results of these efforts for Enterprise programs and projects should be reduced cost, enhanced mission capability and expedited mission completion.

Augmentative and alternative communication supports for adults with autism spectrum disorders.

PubMed

Trembath, David; Iacono, Teresa; Lyon, Katie; West, Denise; Johnson, Hilary

2014-11-01

Many adults with autism spectrum disorders have complex communication needs and may benefit from the use of augmentative and alternative communication. However, there is a lack of research examining the specific communication needs of these adults, let alone the outcomes of interventions aimed at addressing them. The aim of this study was to explore the views and experiences of support workers and family members regarding the outcomes of providing low-technology communication aids to adults with autism spectrum disorders. The participants were six support workers and two family members of six men and women with autism spectrum disorders, who had received low-technology communication aids. Using semi-structured, in-depth interviews and following thematic analysis, the results revealed strong support for, and the potential benefits of, augmentative and alternative communication for both adults with autism spectrum disorders and their communication partners. The results also revealed inconsistencies in the actions taken to support the use of the prescribed augmentative and alternative communication systems, pointing to the clinical need to address common barriers to the provision of augmentative and alternative communication support. These barriers include organisational practices and limitations in the knowledge and skills of key stakeholders, as well as problematic attitudes. © The Author(s) 2013.

Computer-Aided Analysis of Patents for Product Technology Maturity Forecasting

NASA Astrophysics Data System (ADS)

Liang, Yanhong; Gan, Dequan; Guo, Yingchun; Zhang, Peng

Product technology maturity foresting is vital for any enterprises to hold the chance for innovation and keep competitive for a long term. The Theory of Invention Problem Solving (TRIZ) is acknowledged both as a systematic methodology for innovation and a powerful tool for technology forecasting. Based on TRIZ, the state -of-the-art on the technology maturity of product and the limits of application are discussed. With the application of text mining and patent analysis technologies, this paper proposes a computer-aided approach for product technology maturity forecasting. It can overcome the shortcomings of the current methods.

AIDS--Tribal Nations Face the Newest Communicable Disease: An Aberdeen Area Perspective.

ERIC Educational Resources Information Center

Claymore, Betty J.; Taylor, Marian A.

1989-01-01

Describes the past impact of smallpox, cholera, and tuberculosis on American Indians. Outlines AIDS/HIV cause, symptoms, and transmission. Discusses AIDS incidence and risk factors among Native Americans, providing details from North Dakota, South Dakota, Nebraska, and Iowa. Points out the urgent need for AIDS education. Contains 25 references.…

Patient Decision Aids Improve Decision Quality and Patient Experience and Reduce Surgical Rates in Routine Orthopaedic Care: A Prospective Cohort Study.

PubMed

Sepucha, Karen; Atlas, Steven J; Chang, Yuchiao; Dorrwachter, Janet; Freiberg, Andrew; Mangla, Mahima; Rubash, Harry E; Simmons, Leigh H; Cha, Thomas

2017-08-02

Patient decision aids are effective in randomized controlled trials, yet little is known about their impact in routine care. The purpose of this study was to examine whether decision aids increase shared decision-making when used in routine care. A prospective study was designed to evaluate the impact of a quality improvement project to increase the use of decision aids for patients with hip or knee osteoarthritis, lumbar disc herniation, or lumbar spinal stenosis. A usual care cohort was enrolled before the quality improvement project and an intervention cohort was enrolled after the project. Participants were surveyed 1 week after a specialist visit, and surgical status was collected at 6 months. Regression analyses adjusted for clustering of patients within clinicians and examined the impact on knowledge, patient reports of shared decision-making in the visit, and surgical rates. With 550 surveys, the study had 80% to 90% power to detect a difference in these key outcomes. The response rates to the 1-week survey were 70.6% (324 of 459) for the usual care cohort and 70.2% (328 of 467) for the intervention cohort. There was no significant difference (p > 0.05) in any patient characteristic between the 2 cohorts. More patients received decision aids in the intervention cohort at 63.6% compared with the usual care cohort at 27.3% (p = 0.007). Decision aid use was associated with higher knowledge scores, with a mean difference of 18.7 points (95% confidence interval [CI], 11.4 to 26.1 points; p < 0.001) for the usual care cohort and 15.3 points (95% CI, 7.5 to 23.0 points; p = 0.002) for the intervention cohort. Patients reported more shared decision-making (p = 0.009) in the visit with their surgeon in the intervention cohort, with a mean Shared Decision-Making Process score (and standard deviation) of 66.9 ± 27.5 points, compared with the usual care cohort at 62.5 ± 28.6 points. The majority of patients received their preferred treatment, and this did not differ by cohort or decision aid use. Surgical rates were lower in the intervention cohort for those who received the decision aids at 42.3% compared with 58.8% for those who did not receive decision aids (p = 0.023) and in the usual care cohort at 44.3% for those who received decision aids compared with 55.7% for those who did not receive them (p = 0.45). The quality improvement project successfully integrated patient decision aids into a busy orthopaedic clinic. When used in routine care, decision aids are associated with increased knowledge, more shared decision-making, and lower surgical rates. There is increasing pressure to design systems of care that inform and involve patients in decisions about elective surgery. In this study, the authors found that patient decision aids, when used as part of routine orthopaedic care, were associated with increased knowledge, more shared decision-making, higher patient experience ratings, and lower surgical rates.

Applications of artificial intelligence to rotorcraft

NASA Technical Reports Server (NTRS)

Abbott, Kathy H.

1987-01-01

The application of AI technology may have significant potential payoff for rotorcraft. In the near term, the status of the technology will limit its applicability to decision aids rather than total automation. The specific application areas are categorized into onboard and nonflight aids. The onboard applications include: fault monitoring, diagnosis, and reconfiguration; mission and tactics planning; situation assessment; navigation aids, especially in nap-of-the-earth flight; and adaptive man-machine interfaces. The nonflight applications include training and maintenance diagnostics.

Robot-Aided Neurorehabilitation

PubMed Central

Krebs, Hermano Igo; Hogan, Neville; Aisen, Mindy L.; Volpe, Bruce T.

2009-01-01

Our goal is to apply robotics and automation technology to assist, enhance, quantify, and document neurorehabilitation. This paper reviews a clinical trial involving 20 stroke patients with a prototype robot-aided rehabilitation facility developed at the Massachusetts Institute of Technology, Cambridge, (MIT) and tested at Burke Rehabilitation Hospital, White Plains, NY. It also presents our approach to analyze kinematic data collected in the robot-aided assessment procedure. In particular, we present evidence 1) that robot-aided therapy does not have adverse effects, 2) that patients tolerate the procedure, and 3) that peripheral manipulation of the impaired limb may influence brain recovery. These results are based on standard clinical assessment procedures. We also present one approach using kinematic data in a robot-aided assessment procedure. PMID:9535526

Information technology aided exploration of system design spaces

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Kiper, James D.; Kalafat, Selcuk

2004-01-01

We report on a practical application of information technology techniques to aid system engineers effectively explore large design spaces. We make use of heuristic search, visualization and data mining, the combination of which we have implemented wtihin a risk management tool in use at JPL and NASA.

Uncertainty management in intelligent design aiding systems

NASA Technical Reports Server (NTRS)

Brown, Donald E.; Gabbert, Paula S.

1988-01-01

A novel approach to uncertainty management which is particularly effective in intelligent design aiding systems for large-scale systems is presented. The use of this approach in the materials handling system design domain is discussed. It is noted that, during any point in the design process, a point value can be obtained for the evaluation of feasible designs; however, the techniques described provide unique solutions for these point values using only the current information about the design environment.

Phase-shifting point diffraction interferometer focus-aid enhanced mask

DOEpatents

Naulleau, Patrick

2000-01-01

A phase-shifting point diffraction interferometer system (PS/PDI) employing a PS/PDI mask that includes a PDI focus aid is provided. The PDI focus aid mask includes a large or secondary reference pinhole that is slightly displaced from the true or primary reference pinhole. The secondary pinhole provides a larger capture tolerance for interferometrically performing fine focus. With the focus-aid enhanced mask, conventional methods such as the knife-edge test can be used to perform an initial (or rough) focus and the secondary (large) pinhole is used to perform interferometric fine focus. Once the system is well focused, high accuracy interferometry can be performed using the primary (small) pinhole.

Ivy League Agrees to End Collaboration on Financial Aid.

ERIC Educational Resources Information Center

Jaschik, Scott

1991-01-01

The Ivy League colleges, formally charged with violating federal antitrust laws, agreed to stop setting joint financial-aid policies and sharing information about aid packages. The Massachusetts Institute of Technology denies violating any laws. A group of 23 prestigious institutions, the Overlap Group, have collaborated annually on financial aid.…

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Financial Aid Tipping Points: An Analysis of Aid and Academic Achievement at a California Community College

ERIC Educational Resources Information Center

Coria, Elizabeth; Hoffman, John L.

2016-01-01

The purpose of this study was to explore relationships between financial aid awards and measures of student academic achievement. Financial aid and academic records for 11,956 students attending an urban California community college were examined and analyzed using simultaneous linear regression and two-way factorial ANOVAs. Findings revealed a…

User involvement in service delivery predicts outcomes of assistive technology use: a cross-sectional study in Bangladesh.

PubMed

Borg, Johan; Larsson, Stig; Ostergren, Per-Olof; Rahman, A S M Atiqur; Bari, Nazmul; Khan, A H M Noman

2012-09-20

Knowledge about the relation between user involvement in the provision of assistive technology and outcomes of assistive technology use is a prerequisite for the development of efficient service delivery strategies. However, current knowledge is limited, particularly from low-income countries where affordability is an issue. The objective was therefore to explore the relation between outcomes of assistive technology use and user involvement in the service delivery process in Bangladesh. Using structured interviews, data from 136 users of hearing aids and 149 users of manual wheelchairs were collected. Outcomes were measured using the International Outcome Inventory for Hearing Aids (IOI-HA), which was adapted for wheelchair users. Predictors of user involvement included preference, measurement and training. Users reported outcomes comparable to those found in other high- and low-income countries. User involvement increased the likelihood for reporting better outcomes except for measurement among hearing aid users. The findings support the provision of assistive technology as a strategy to improve the participation of people with disabilities in society. They also support current policies and guidelines for user-involvement in the service delivery process. Simplified strategies for provision of hearing aids may be explored.

Image is everything: pearls and pitfalls of digital photography and PowerPoint presentations for the cosmetic surgeon.

PubMed

Niamtu, Joseph

2004-01-01

Cosmetic surgery and photography are inseparable. Clinical photographs serve as diagnostic aids, medical records, legal protection, and marketing tools. In the past, taking high-quality, standardized images and maintaining and using them for presentations were tasks of significant proportion when done correctly. Although the cosmetic literature is replete with articles on standardized photography, this has eluded many practitioners in part to the complexity. A paradigm shift has occurred in the past decade, and digital technology has revolutionized clinical photography and presentations. Digital technology has made it easier than ever to take high-quality, standardized images and to use them in a multitude of ways to enhance the practice of cosmetic surgery. PowerPoint presentations have become the standard for academic presentations, but many pitfalls exist, especially when taking a backup disc to play on an alternate computer at a lecture venue. Embracing digital technology has a mild to moderate learning curve but is complicated by old habits and holdovers from the days of slide photography, macro lenses, and specialized flashes. Discussion is presented to circumvent common problems involving computer glitches with PowerPoint presentations. In the past, high-quality clinical photography was complex and sometimes beyond the confines of a busy clinical practice. The digital revolution of the past decade has removed many of these associated barriers, and it has never been easier or more affordable to take images and use them in a multitude of ways for learning, judging surgical outcomes, teaching and lecturing, and marketing. Even though this technology has existed for years, many practitioners have failed to embrace it for various reasons or fears. By following a few simple techniques, even the most novice practitioner can be on the forefront of digital imaging technology. By observing a number of modified techniques with digital cameras, any practitioner can take high-quality, standardized clinical photographs and can make and use these images to enhance his or her practice. This article deals with common pitfalls of digital photography and PowerPoint presentations and presents multiple pearls to achieve proficiency quickly with digital photography and imaging as well as avoid malfunction of PowerPoint presentations in an academic lecture venue.

Standalone medical device software: The evolving regulatory framework.

PubMed

McCarthy, Avril D; Lawford, Patricia V

2014-01-01

The paper provides an introduction to the regulatory landscape affecting a particular category of medical technology, namely standalone software-sometimes referred to as 'software as a medical device'. To aid the reader's comprehension of an often complex area, six case studies are outlined and discussed before the paper continues to provide detail of how software with a medical purpose in its own right can potentially be classified as a medical device. The reader is provided an appreciation of how to go about classifying such software and references to support the developer new to the field in locating detailed regulatory support documents and contact points for advice.

Effectiveness of educational technology to improve patient care in pharmacy curricula.

PubMed

Smith, Michael A; Benedict, Neal

2015-02-17

A review of the literature on the effectiveness of educational technologies to teach patient care skills to pharmacy students was conducted. Nineteen articles met inclusion criteria for the review. Seven of the articles included computer-aided instruction, 4 utilized human-patient simulation, 1 used both computer-aided instruction and human-patient simulation, and 7 utilized virtual patients. Educational technology was employed with more than 2700 students at 12 colleges and schools of pharmacy in courses including pharmacotherapeutics, skills and patient care laboratories, drug diversion, and advanced pharmacy practice experience (APPE) orientation. Students who learned by means of human-patient simulation and virtual patients reported enjoying the learning activity, whereas the results with computer-aided instruction were mixed. Moreover, the effect on learning was significant in the human-patient simulation and virtual patient studies, while conflicting data emerged on the effectiveness of computer-aided instruction.

An esthetics rehabilitation with computer-aided design/ computer-aided manufacturing technology.

PubMed

Mazaro, Josá Vitor Quinelli; de Mello, Caroline Cantieri; Zavanelli, Adriana Cristina; Santiago, Joel Ferreira; Amoroso, Andressa Paschoal; Pellizzer, Eduardo Piza

2014-07-01

This paper describes a case of a rehabilitation involving Computer Aided Design/Computer Aided Manufacturing (CAD-CAM) system in implant supported and dental supported prostheses using zirconia as framework. The CAD-CAM technology has developed considerably over last few years, becoming a reality in dental practice. Among the widely used systems are the systems based on zirconia which demonstrate important physical and mechanical properties of high strength, adequate fracture toughness, biocompatibility and esthetics, and are indicated for unitary prosthetic restorations and posterior and anterior framework. All the modeling was performed by using CAD-CAM system and prostheses were cemented using resin cement best suited for each situation. The rehabilitation of the maxillary arch using zirconia framework demonstrated satisfactory esthetic and functional results after a 12-month control and revealed no biological and technical complications. This article shows the important of use technology CAD/CAM in the manufacture of dental prosthesis and implant-supported.

A perspective on early commercial applications of voice-processing technology for telecommunications and aids for the handicapped.

PubMed Central

Seelbach, C

1995-01-01

The Colloquium on Human-Machine Communication by Voice highlighted the global technical community's focus on the problems and promise of voice-processing technology, particularly, speech recognition and speech synthesis. Clearly, there are many areas in both the research and development of these technologies that can be advanced significantly. However, it is also true that there are many applications of these technologies that are capable of commercialization now. Early successful commercialization of new technology is vital to ensure continuing interest in its development. This paper addresses efforts to commercialize speech technologies in two markets: telecommunications and aids for the handicapped. PMID:7479814

Role of delay and screening in controlling AIDS

NASA Astrophysics Data System (ADS)

Chauhan, Sudipa; Bhatia, Sumit Kaur; Gupta, Surbhi

2016-06-01

We propose a non-linear HIV/ AIDS model to analyse the spread and control of HIV/AIDS. The population is divided into three classes, susceptible, infective and AIDS patients. The model is developed under the assumptions of vertical transmission and time delay in infective class. Time delay is also included to show sexual maturity period of infected newborns. We study dynamics of the model and obtain the reproduction number. Now to control the epidemic, we study the model where aware infective class is also added, i.e., people are made aware of their medical status by way of screening. To make the model more realistic, we consider the situation where aware infective class also interacts with other people. The model is analysed qualitatively by stability theory of ODE. Stability analysis of both disease-free and endemic equilibrium is studied based on reproduction number. Also, it is proved that if (R0)1, R1 ≤ 1 then, disease free equilibrium point is locally asymptotically stable and if (R0)1, R1 > 1 then, disease free equilibrium is unstable. Also, the stability analysis of endemic equilibrium point has been done and it is shown that for (R0)1 > 1 endemic equilibrium point is stable. Global stability analysis of endemic equilibrium point has also been done. At last, it is shown numerically that the delay in sexual maturity of infected individuals result in less number of AIDS patients.

Impact of Hearing Aid Technology on Outcomes in Daily Life III: Localization.

PubMed

Johnson, Jani A; Xu, Jingjing; Cox, Robyn M

Compared to basic-feature hearing aids, premium-feature hearing aids have more advanced technologies and sophisticated features. The objective of this study was to explore the difference between premium-feature and basic-feature hearing aids in horizontal sound localization in both laboratory and daily life environments. We hypothesized that premium-feature hearing aids would yield better localization performance than basic-feature hearing aids. Exemplars of premium-feature and basic-feature hearing aids from two major manufacturers were evaluated. Forty-five older adults (mean age 70.3 years) with essentially symmetrical mild to moderate sensorineural hearing loss were bilaterally fitted with each of the four pairs of hearing aids. Each pair of hearing aids was worn during a 4-week field trial and then evaluated using laboratory localization tests and a standardized questionnaire. Laboratory localization tests were conducted in a sound-treated room with a 360°, 24-loudspeaker array. Test stimuli were high frequency and low frequency filtered short sentences. The localization test in quiet was designed to assess the accuracy of front/back localization, while the localization test in noise was designed to assess the accuracy of locating sound sources throughout a 360° azimuth in the horizontal plane. Laboratory data showed that unaided localization was not significantly different from aided localization when all hearing aids were combined. Questionnaire data showed that aided localization was significantly better than unaided localization in everyday situations. Regarding the difference between premium-feature and basic-feature hearing aids, laboratory data showed that, overall, the premium-feature hearing aids yielded more accurate localization than the basic-feature hearing aids when high-frequency stimuli were used, and the listening environment was quiet. Otherwise, the premium-feature and basic-feature hearing aids yielded essentially the same performance in other laboratory tests and in daily life. The findings were consistent for both manufacturers. Laboratory tests for two of six major manufacturers showed that premium-feature hearing aids yielded better localization performance than basic-feature hearing aids in one out of four laboratory conditions. There was no difference between the two feature levels in self-reported everyday localization. Effectiveness research with different hearing aid technologies is necessary, and more research with other manufacturers' products is needed. Furthermore, these results confirm previous observations that research findings in laboratory conditions might not translate to everyday life.

Financial Aid Policies and Practices at Graduate and Professional Programs. Results from the 1998 Survey of Graduate Aid Policies, Practices, and Procedures (SOGAPPP).

ERIC Educational Resources Information Center

National Association of Student Financial Aid Administrators, Washington, DC.

To obtain information about the distribution of financial aid funds to graduate and professional students, the National Association of Student Financial Aid Information developed a survey about specific programs and awards, distribution methods, loan packaging policies, the use of professional judgment, the use of technology in aid offices, and…

The Conceptualization of the Mathematical Modelling Process in Technology-Aided Environment

ERIC Educational Resources Information Center

Hidiroglu, Çaglar Naci; Güzel, Esra Bukova

2017-01-01

The aim of the study is to conceptualize the technology-aided mathematical modelling process in the frame of cognitive modelling perspective. The grounded theory approach was adopted in the study. The research was conducted with seven groups consisting of nineteen prospective mathematics teachers. The data were collected from the video records of…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Computer-Aided Drafting. Education for Technology Employment.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Technology.

This computer-aided drafting (CAD) curriculum was developed to provide drafting instructors in Illinois with a useful guide for relating an important new technological advance to the vocational classroom. The competency-based learning activity guides are written to be used with any CAD system being used at the secondary and postsecondary levels.…

Presentation Technology in the Age of Electronic Eloquence: From Visual Aid to Visual Rhetoric

ERIC Educational Resources Information Center

Cyphert, Dale

2007-01-01

Attention to presentation technology in the public speaking classroom has grown along with its contemporary use, but instruction generally positions the topic as a subset of visual aids. As contemporary public discourse enters an age of electronic eloquence, instructional focus on verbal communication might limit students' capacity to effectively…

Subject Access Points in the MARC Record and Archival Finding Aid: Enough or Too Many?

ERIC Educational Resources Information Center

Cox, Elizabeth; Czechowski, Leslie

2007-01-01

In this research project, the authors set out to discover the current practice in both the archival and cataloging worlds for usage of access points in descriptive records and to learn how archival descriptive practices fit into long-established library cataloging procedures and practices. A sample of archival finding aids and MARC records at 123…

Using a geographic information system to enhance patient access to point-of-care diagnostics in a limited-resource setting.

PubMed

Ferguson, William J; Kemp, Karen; Kost, Gerald

2016-03-01

Rapid and accurate diagnosis drives evidence-based care in health. Point-of-care testing (POCT) aids diagnosis by bringing advanced technologies closer to patients. Health small-world networks are constrained by natural connectivity in the interactions between geography of resources and social forces. Using a geographic information system (GIS) we can understand how populations utilize their health networks, visualize their inefficiencies, and compare alternatives. This project focuses on cardiac care resource in rural Isaan, Thailand. A health care access analysis was created using ArcGIS Network Analyst 10.1 from data representing aggregated population, roads, health resource facilities, and diagnostic technologies. The analysis quantified cardiac health care access and identified ways to improve it using both widespread and resource-limited strategies. Results indicated that having diagnostic technologies closer to populations streamlines critical care paths. GIS allowed us to compare the effectiveness of the implementation strategies and put into perspective the benefits of adopting rapid POCT within health networks. Geospatial analyses derive high impact by improving alternative diagnostic placement strategies in limited-resource settings and by revealing deficiencies in health care access pathways. Additionally, the GIS provides a platform for comparing relative costs, assessing benefits, and improving outcomes. This approach can be implemented effectively by health ministries seeking to enhance cardiac care despite limited resources.

Delivering patient decision aids on the Internet: definitions, theories, current evidence, and emerging research areas

PubMed Central

2013-01-01

Background In 2005, the International Patient Decision Aids Standards Collaboration identified twelve quality dimensions to guide assessment of patient decision aids. One dimension—the delivery of patient decision aids on the Internet—is relevant when the Internet is used to provide some or all components of a patient decision aid. Building on the original background chapter, this paper provides an updated definition for this dimension, outlines a theoretical rationale, describes current evidence, and discusses emerging research areas. Methods An international, multidisciplinary panel of authors examined the relevant theoretical literature and empirical evidence through 2012. Results The updated definition distinguishes Internet-delivery of patient decision aids from online health information and clinical practice guidelines. Theories in cognitive psychology, decision psychology, communication, and education support the value of Internet features for providing interactive information and deliberative support. Dissemination and implementation theories support Internet-delivery for providing the right information (rapidly updated), to the right person (tailored), at the right time (the appropriate point in the decision making process). Additional efforts are needed to integrate the theoretical rationale and empirical evidence from health technology perspectives, such as consumer health informatics, user experience design, and human-computer interaction. Despite Internet usage ranging from 74% to 85% in developed countries and 80% of users searching for health information, it is unknown how many individuals specifically seek patient decision aids on the Internet. Among the 86 randomized controlled trials in the 2011 Cochrane Collaboration’s review of patient decision aids, only four studies focused on Internet-delivery. Given the limited number of published studies, this paper particularly focused on identifying gaps in the empirical evidence base and identifying emerging areas of research. Conclusions As of 2012, the updated theoretical rationale and emerging evidence suggest potential benefits to delivering patient decision aids on the Internet. However, additional research is needed to identify best practices and quality metrics for Internet-based development, evaluation, and dissemination, particularly in the areas of interactivity, multimedia components, socially-generated information, and implementation strategies. PMID:24625064

Personal mobility and manipulation using robotics, artificial intelligence and advanced control.

PubMed

Cooper, Rory A; Ding, Dan; Grindle, Garrett G; Wang, Hongwu

2007-01-01

Recent advancements of technologies, including computation, robotics, machine learning, communication, and miniaturization technologies, bring us closer to futuristic visions of compassionate intelligent devices. The missing element is a basic understanding of how to relate human functions (physiological, physical, and cognitive) to the design of intelligent devices and systems that aid and interact with people. Our stakeholder and clinician consultants identified a number of mobility barriers that have been intransigent to traditional approaches. The most important physical obstacles are stairs, steps, curbs, doorways (doors), rough/uneven surfaces, weather hazards (snow, ice), crowded/cluttered spaces, and confined spaces. Focus group participants suggested a number of ways to make interaction simpler, including natural language interfaces such as the ability to say "I want a drink", a library of high level commands (open a door, park the wheelchair, ...), and a touchscreen interface with images so the user could point and use other gestures.

Caregivers' requirements for in-home robotic agent for supporting community-living elderly subjects with cognitive impairment.

PubMed

Faucounau, Véronique; Wu, Ya-Huei; Boulay, Mélodie; Maestrutti, Marina; Rigaud, Anne-Sophie

2009-01-01

Older people are an important and growing sector of the population. This demographic change raises the profile of frailty and disability within the world's population. In such conditions, many old people need aides to perform daily activities. Most of the support is given by family members who are now a new target in the therapeutic approach. With advances in technology, robotics becomes increasingly important as a means of supporting older people at home. In order to ensure appropriate technology, 30 caregivers filled out a self-administered questionnaire including questions on needs to support their proxy and requirements concerning the robotic agent's functions and modes of action. This paper points out the functions to be integrated into the robot in order to support caregivers in the care of their proxy. The results also show that caregivers have a positive attitude towards robotic agents.

Application of auxin-inducible degron technology to mouse oocyte activation with PLCζ.

PubMed

Miura, Kento; Matoba, Shogo; Ogonuki, Narumi; Namiki, Takafumi; Ito, Junya; Kashiwazaki, Naomi; Ogura, Atsuo

2018-05-05

In mammals, spermatozoa activate oocytes by triggering a series of intracellular Ca 2+ oscillations with phospholipase C zeta (PLCζ), a sperm-borne oocyte-activating factor. Because the introduction of PLCζ alone can induce oocyte activation, it might be a promising reagent for assisted reproductive technologies. To test this possibility, we injected human PLCζ (hPLCζ) mRNA into mouse oocytes at different concentrations. We observed the oocyte activation and subsequent embryonic development. Efficient oocyte activation and embryonic development to the blastocyst stage was achieved only with a limited range of mRNA concentrations (0.1 ng/μl). Higher concentrations of mRNA caused developmental arrest of most embryos, suggesting that excessive PLCζ protein might be harmful at this stage. In a second series of experiments, we aimed to regulate the PLCζ protein concentration in oocytes by applying auxin-inducible degron (AID) technology that allows rapid degradation of the target protein tagged with AID induced by auxin. Injection of the hPLCζ protein tagged with AID and enhanced green fluorescent protein (hPLCζ-AID-EGFP) demonstrated that high EGFP expression levels at the late 1-cell stage were efficiently reduced by auxin treatment, suggesting efficient hPLCζ degradation by this system. Furthermore, the defective development observed with higher concentrations of hPLCζ-AID-EGFP mRNA was rescued following auxin treatment. Full-term offspring were obtained by round spermatid injection with optimized hPLCζ-AID activation. Our results indicate that this AID technology can be applied to regulate the protein levels in mouse oocytes and that our optimized PLCζ system could be used for assisted fertilization in mammals.

[Overall digitalization: leading innovation of endodontics in big data era].

PubMed

Ling, J Q

2016-04-09

In big data era, digital technologies bring great challenges and opportunities to modern stomatology. The applications of digital technologies, such as cone-beam CT(CBCT), computer aided design,(CAD)and computer aided manufacture(CAM), 3D printing and digital approaches for education , provide new concepts and patterns to the treatment and study of endodontic diseases. This review provides an overview of the application and prospect of commonly used digital technologies in the development of endodontics.

The Rhetoric and Reality of Aid: Promoting Educational Technology in Egypt

ERIC Educational Resources Information Center

Warschauer, Mark

2004-01-01

This paper examines a US foreign aid project to promote use of new technologies in Egyptian education. Though the project sought to improve teaching and learning, an examination of implementation indicates how goals of Westernization ended up taking precedence. These included a focus on bringing Egyptian educators to the US and on showcasing US…

25 CFR 502.7 - Electronic, computer or other technologic aid.

Code of Federal Regulations, 2013 CFR

2013-04-01

... other technologic aid means any machine or device that: (1) Assists a player or the playing of a game... not limited to, machines or devices that: (1) Broaden the participation levels in a common game; (2) Facilitate communication between and among gaming sites; or (3) Allow a player to play a game with or against...

25 CFR 502.7 - Electronic, computer or other technologic aid.

Code of Federal Regulations, 2011 CFR

2011-04-01

... other technologic aid means any machine or device that: (1) Assists a player or the playing of a game... not limited to, machines or devices that: (1) Broaden the participation levels in a common game; (2) Facilitate communication between and among gaming sites; or (3) Allow a player to play a game with or against...

25 CFR 502.7 - Electronic, computer or other technologic aid.

Code of Federal Regulations, 2010 CFR

2010-04-01

... other technologic aid means any machine or device that: (1) Assists a player or the playing of a game... not limited to, machines or devices that: (1) Broaden the participation levels in a common game; (2) Facilitate communication between and among gaming sites; or (3) Allow a player to play a game with or against...

25 CFR 502.7 - Electronic, computer or other technologic aid.

Code of Federal Regulations, 2012 CFR

2012-04-01

... other technologic aid means any machine or device that: (1) Assists a player or the playing of a game... not limited to, machines or devices that: (1) Broaden the participation levels in a common game; (2) Facilitate communication between and among gaming sites; or (3) Allow a player to play a game with or against...

25 CFR 502.7 - Electronic, computer or other technologic aid.

Code of Federal Regulations, 2014 CFR

2014-04-01

... other technologic aid means any machine or device that: (1) Assists a player or the playing of a game... not limited to, machines or devices that: (1) Broaden the participation levels in a common game; (2) Facilitate communication between and among gaming sites; or (3) Allow a player to play a game with or against...

Didactics of the Use of ICT and Traditional Teaching Aids in Municipal Higher Education Institutions

ERIC Educational Resources Information Center

Lombillo Rivero, Ideleichy; López Padrón, Alexander; Zumeta Izaguirre, Ernesto

2012-01-01

Issues related to the use of teaching aids in Higher Education are currently going through constant revision and rethinking due to the rapid advancement of science and technology. Their uses have significantly changed after the introduction of Information and Communication Technologies (ICTs) within the educational field. One of the main tasks to…

Virtual Reality-Based Technologies in Dental Medicine: Knowledge, Attitudes and Practice among Students and Practitioners

ERIC Educational Resources Information Center

Sabalic, Maja; Schoener, Jason D.

2017-01-01

Virtual reality-based technologies have been used in dentistry for almost two decades. Dental simulators, planning software and CAD/CAM (computer-aided design/computer-aided manufacturing) systems have significantly developed over the years and changed both dental education and clinical practice. This study aimed to assess the knowledge, attitudes…

Conceptualization of Approaches and Thought Processes Emerging in Validating of Model in Mathematical Modeling in Technology Aided Environment

ERIC Educational Resources Information Center

Hidiroglu, Çaglar Naci; Bukova Güzel, Esra

2013-01-01

The aim of the present study is to conceptualize the approaches displayed for validation of model and thought processes provided in mathematical modeling process performed in technology-aided learning environment. The participants of this grounded theory study were nineteen secondary school mathematics student teachers. The data gathered from the…

Role of Assessment Conversations in a Technology-Aided Classroom with English Language Learners: An Exploratory Study

ERIC Educational Resources Information Center

Menon, Preetha

2018-01-01

This article is drawn from a study conducted to explore how assessment conversations, a type of informal formative assessment, can support science learning in a technology-aided seventh-grade classroom in Northern California. The classroom setting where the study took place used interactive whiteboards in conjunction with the inquiry-based…

Using a Technology-Based Case to Aid in Improving Assessment

ERIC Educational Resources Information Center

Zelin, Robert C., II

2008-01-01

This paper describes how a technology-based case using Microsoft Access can aid in the assessment process. A case was used in lieu of giving a final examination in an Accounting Information Systems course. Students worked in small groups to design a database-driven payroll system for a hypothetical company. Each group submitted its results along…

Promoting Physical Activity in People with Intellectual and Multiple Disabilities through a Basic Technology-Aided Program

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Alberti, Gloria; Perilli, Viviana; Zimbaro, Carmen; Boccasini, Adele; Mazzola, Carlo; Russo, Roberto

2018-01-01

This study assessed a technology-aided program (monitoring responding, and ensuring preferred stimulation and encouragements) for promoting physical activity with 11 participants with severe/profound intellectual and multiple disabilities. Each participant was provided with an exercise device (e.g. a static bicycle and a stepper) and exposed to…

Right choice, right time: Evaluation of an online decision aid for youth depression.

PubMed

Simmons, Magenta B; Elmes, Aurora; McKenzie, Joanne E; Trevena, Lyndal; Hetrick, Sarah E

2017-08-01

Appropriate treatment for youth depression is an important public health priority. Shared decision making has been recommended, yet no decision aids exist to facilitate this. The main objective of this study was to evaluate an online decision aid for youth depression. An uncontrolled cohort study with pre-decision, immediately post-decision and follow-up measurements. Young people (n=66) aged 12-25 years with mild, mild-moderate or moderate-severe depression were recruited from two enhanced primary care services. Online decision aid with evidence communication, preference elicitation and decision support components. The main outcome measures were ability to make a decision; whether the decision was in line with clinical practice guidelines, personal preferences and values; decisional conflict; perceived involvement; satisfaction with decision; adherence; and depression scores at follow-up. After using the decision aid, clients were more likely to make a decision in line with guideline recommendations (93% vs 70%; P=.004), were more able to make a decision (97% vs 79%; P=.022), had significantly reduced decisional conflict (17.8 points lower (95% CI: 13.3-22.9 points lower) on the Decisional Conflict Scale (range 0-100)) and felt involved and satisfied with their decision. At follow-up, clients had significantly reduced depression symptoms (2.7 points lower (95% CI: 1.3-4.0 points lower) on the Patient Health Questionnaire nine-item scale (range 0-27)) and were adherent to 88% (95% CI: 82%-94%) of treatment courses. A decision aid for youth depression can help ensure evidence-based, client-centred care, promoting collaboration in this often difficult to engage population. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

Laser Surveying

NASA Technical Reports Server (NTRS)

1978-01-01

NASA technology has produced a laser-aided system for surveying land boundaries in difficult terrain. It does the job more accurately than conventional methods, takes only one-third the time normally required, and is considerably less expensive. In surveying to mark property boundaries, the objective is to establish an accurate heading between two "corner" points. This is conventionally accomplished by erecting a "range pole" at one point and sighting it from the other point through an instrument called a theodolite. But how do you take a heading between two points which are not visible to each other, for instance, when tall trees, hills or other obstacles obstruct the line of sight? That was the problem confronting the U.S. Department of Agriculture's Forest Service. The Forest Service manages 187 million acres of land in 44 states and Puerto Rico. Unfortunately, National Forest System lands are not contiguous but intermingled in complex patterns with privately-owned land. In recent years much of the private land has been undergoing development for purposes ranging from timber harvesting to vacation resorts. There is a need for precise boundary definition so that both private owners and the Forest Service can manage their properties with confidence that they are not trespassing on the other's land.

Standardized End Point Definitions for Coronary Intervention Trials: The Academic Research Consortium-2 Consensus Document.

PubMed

Garcia-Garcia, Hector M; McFadden, Eugène P; Farb, Andrew; Mehran, Roxana; Stone, Gregg W; Spertus, John; Onuma, Yoshinobu; Morel, Marie-Angèle; van Es, Gerrit-Anne; Zuckerman, Bram; Fearon, William F; Taggart, David; Kappetein, Arie-Pieter; Krucoff, Mitchell W; Vranckx, Pascal; Windecker, Stephan; Cutlip, Donald; Serruys, Patrick W

2018-06-14

The Academic Research Consortium (ARC)-2 initiative revisited the clinical and angiographic end point definitions in coronary device trials, proposed in 2007, to make them more suitable for use in clinical trials that include increasingly complex lesion and patient populations and incorporate novel devices such as bioresorbable vascular scaffolds. In addition, recommendations for the incorporation of patient-related outcomes in clinical trials are proposed. Academic Research Consortium-2 is a collaborative effort between academic research organizations in the United States and Europe, device manufacturers, and European, US, and Asian regulatory bodies. Several in-person meetings were held to discuss the changes that have occurred in the device landscape and in clinical trials and regulatory pathways in the last decade. The consensus-based end point definitions in this document are endorsed by the stakeholders of this document and strongly advocated for clinical trial purposes. This Academic Research Consortium-2 document provides further standardization of end point definitions for coronary device trials, incorporating advances in technology and knowledge. Their use will aid interpretation of trial outcomes and comparison among studies, thus facilitating the evaluation of the safety and effectiveness of these devices.

Hearing aids: indications, technology, adaptation, and quality control

PubMed Central

Hoppe, Ulrich; Hesse, Gerhard

2017-01-01

Hearing loss can be caused by a number of different pathological conditions. Some of them can be successfully treated, mainly by surgery, depending on the individual’s disease process. However, the treatment of chronic sensorineural hearing loss with damaged cochlear structures usually needs hearing rehabilitation by means of technical amplification. During the last two decades tremendous improvements in hearing aid technology led to a higher quality of the hearing rehabilitation process. For example, due to sophisticated signal processing acoustic feedback could be reduced and hence open fitting options are available even for more subjects with higher degrees of hearing loss. In particular for high-frequency hearing loss, the use of open fitting is an option. Both the users’ acceptance and the perceived sound quality were significantly increased by open fittings. However, we are still faced with a low level of readiness in many hearing impaired subjects to accept acoustic amplification. Since ENT specialists play a key-role in hearing aid provision, they should promote early hearing aid rehabilitation and include this in the counselling even in subjects with mild and moderate hearing loss. Recent investigations demonstrated the benefit of early hearing aid use in this group of patients since this may help to reduce subsequent damages as auditory deprivation, social isolation, development of dementia, and cognitive decline. For subjects with tinnitus, hearing aids may also support masking by environmental sounds and enhance cortical inhibition. The present paper describes the latest developments of hearing aid technology and the current state of the art for amplification modalities. Implications for both hearing aid indication and provision are discussed. PMID:29279726

Professionals' views on the use of smartphone technology to support children and adolescents with memory impairment due to acquired brain injury.

PubMed

Plackett, Ruth; Thomas, Sophie; Thomas, Shirley

2017-04-01

Purpose To identify from a health-care professionals' perspective whether smartphones are used by children and adolescents with acquired brain injury as memory aids; what factors predict smartphone use and what barriers prevent the use of smartphones as memory aids by children and adolescents. Method A cross-sectional online survey was undertaken with 88 health-care professionals working with children and adolescents with brain injury. Results Children and adolescents with brain injury were reported to use smartphones as memory aids by 75% of professionals. However, only 42% of professionals helped their clients to use smartphones. The only factor that significantly predicted reported smartphone use was the professionals' positive attitudes toward assistive technology. Several barriers to using smartphones as memory aids were identified, including the poor accessibility of devices and cost of devices. Conclusion Many children and adolescents with brain injury are already using smartphones as memory aids but this is often not facilitated by professionals. Improving the attitudes of professionals toward using smartphones as assistive technology could help to increase smartphone use in rehabilitation. Implications for Rehabilitation Smartphones could be incorporated into rehabilitation programs for young people with brain injury as socially acceptable compensatory aids. Further training and support for professionals on smartphones as compensatory aids could increase professionals' confidence and attitudes in facilitating the use of smartphones as memory aids. Accessibility could be enhanced by the development of a smartphone application specifically designed to be used by young people with brain injury.

Complete Dentures Fabricated with CAD/CAM Technology and a Traditional Clinical Recording Method.

PubMed

Janeva, Nadica; Kovacevska, Gordana; Janev, Edvard

2017-10-15

The introduction of computer-aided design/computer-aided manufacturing (CAD/CAM) technology into complete denture (CD) fabrication ushered in a new era in removable prosthodontics. Commercially available CAD/CAM denture systems are expected to improve upon the disadvantages associated with conventional fabrication. The purpose of this report is to present the workflow involved in fabricating a CD with a traditional clinical recording method and CAD/CAM technology and to summarize the advantages to the dental practitioner and the patient.

A paediatric and perinatal HIV/AIDS leadership initiative in Kingston, Jamaica.

PubMed

Christie, C D C

2004-10-01

In Jamaica 1-2% of pregnant women are HIV-positive; 876 HIV-positive pregnant women will deliver and at least 283 newly infected HIV-infected infants will be born in 2003; HIV/AIDS is the leading cause of death in children aged one to four years. We describe a collaborative "Town and Gown" programme to address the paediatric and perinatal HIV epidemic in Kingston. A team of academic and government healthcare personnel, comprising paediatricians, obstetricians, public health practitioners, nurses, microbiologists, data management and information technology personnel collaborated to address this public health emergency. A five-point plan was implemented This comprised leadership and training of a core group of paediatric/perinatal HIVprofessionals to serve Greater Kingston and St Catherine and be a model for the rest of Jamaica. Mother-to-child transmission of HIV/AIDS is prevented by counselling and HIV-testing women in the antenatal clinics, giving azidothymidine (AZT) to HIV pregnant women beginning at 28 weeks gestation, throughout labour and to the HIV-exposed infants for the first six weeks of life. A unified parallel programme for identifying the HIV-infected infant and delivering paediatric HIV care at the major paediatric centres was implemented In three years, over 30,000 pregnant women are being tested for HIV; 600 HIV-exposed babies are being identified and about 140 paediatric HIV infections will be prevented The team is building research capacity which emphasizes a strong outcomes-based research agenda and implementation of clinical trials. We are collaborating, locally, regionally and internationally. Collaboratively, the mission of reducing mother-to-child transmission of HIV/AIDS and improving the quality of life for those already living and affected by HIV/AIDS can be achieved.

Satellite-aided mobile radio concepts study: Concept definition of a satellite-aided mobile and personal radio communication system

NASA Technical Reports Server (NTRS)

Anderson, R. E.

1979-01-01

The satellite system requires the use of a large satellite antenna and spacecraft array power of about 12 kW or more depending on the operating frequency. Technology developments needed include large offset reflector multibeam antennas, satellite electrical power sybsystems providing greater than 12 kW of power, signal switching hardware, and linearized efficient solid state amplifiers for the satellite-aided mobile band. Presently there is no frequency assignment for this service, and it is recommended that an allocation be pursued. The satellite system appears to be within reasonable extrapolation of the state of the art. It is further recommended that the satellite-aided system spacecraft definition studies and supporting technology development be initiated.

A cache-aided multiprocessor rollback recovery scheme

NASA Technical Reports Server (NTRS)

Wu, Kun-Lung; Fuchs, W. Kent

1989-01-01

This paper demonstrates how previous uniprocessor cache-aided recovery schemes can be applied to multiprocessor architectures, for recovering from transient processor failures, utilizing private caches and a global shared memory. As with cache-aided uniprocessor recovery, the multiprocessor cache-aided recovery scheme of this paper can be easily integrated into standard bus-based snoopy cache coherence protocols. A consistent shared memory state is maintained without the necessity of global check-pointing.

Technology-Aided Pictorial Cues to Support the Performance of Daily Activities by Persons with Moderate Alzheimer's Disease

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Perilli, Viviana; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Cassano, Germana; Pinto, Katia; Minervini, Mauro G.; Oliva, Doretta

2012-01-01

We developed a technology-aided intervention strategy relying on pictorial cues alone or in combination with verbal instructions and assessed these two versions of the strategy with three persons with moderate Alzheimer's disease. In Section I of the study, the strategy version with pictorial cues plus verbal instructions was compared with an…

Investigation of air transportation technology at Princeton University, 1990-1991

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1991-01-01

The Air Transportation Technology Program at Princeton University is a program that emphasizes graduate and undergraduate student research. The program proceeded along six avenues during the past year: microburst hazards to aircraft, intelligent failure tolerant control, computer-aided heuristics for piloted flight, stochastic robustness of flight control systems, neural networks for flight control, and computer-aided control system design.

A Comparison of the Effectiveness between Computer Aided Drafting and the Traditional Drafting Techniques as Methods of Teaching Pictorial and Multiview Drawings.

ERIC Educational Resources Information Center

Kashef, Ali E.

A study was conducted to determine the effectiveness of teaching multiview and pictorial drawing using traditional methods and using computer-aided drafting (CAD). Research used a quasi-experimental design; subjects were 37 full- and part-time undergraduate students in industrial technology or technology education courses. The students were…

Effectiveness of Teaching Café Waitering to Adults with Intellectual Disability through Audio-Visual Technologies

ERIC Educational Resources Information Center

Cavkaytar, Atilla; Acungil, Ahmet Turan; Tomris, Gözde

2017-01-01

Learning vocational skills and employment are a priority, for adults with intellectual disability (AID) in terms of living independently. Use of technologies for the education of AID is one of the primary goals of World Health Organization. The aim of this research was to determine the effectiveness of teaching café waitering to adults with…

Persons with Multiple Disabilities Use Forehead and Smile Responses to Access or Choose among Technology-Aided Stimulation Events

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Alberti, Gloria; Bellini, Domencio; Oliva, Doretta; Boccasini, Adele; La Martire, Maria L.; Signorino, Mario

2013-01-01

A variety of technology-aided programs have been developed to help persons with congenital or acquired multiple disabilities access preferred stimuli or choose among stimulus options. The application of those programs may pose problems when the participants have very limited behavior repertoires and are unable to use conventional responses and…

Technology-Aided Instruction and Intervention for Students with ASD: A Meta-Analysis Using Novel Methods of Estimating Effect Sizes for Single-Case Research

ERIC Educational Resources Information Center

Barton, Erin E.; Pustejovsky, James E.; Maggin, Daniel M.; Reichow, Brian

2017-01-01

The adoption of methods and strategies validated through rigorous, experimentally oriented research is a core professional value of special education. We conducted a systematic review and meta-analysis examining the experimental literature on Technology-Aided Instruction and Intervention (TAII) using research identified as part of the National…

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

ERIC Educational Resources Information Center

Stanton, Michael; And Others

1985-01-01

Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

Automated Student Aid Processing: The Challenge and Opportunity.

ERIC Educational Resources Information Center

St. John, Edward P.

1985-01-01

To utilize automated technology for student aid processing, it is necessary to work with multi-institutional offices (student aid, admissions, registration, and business) and to develop automated interfaces with external processing systems at state and federal agencies and perhaps at need-analysis organizations and lenders. (MLW)

77 FR 48507 - Proposed Information Collection Requests; Federal Student Aid; Foreign School Supplemental...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-14

..., including through the use of information technology. Please note that written comments received in response... Information for Financial Aid Professionals Web page. Only foreign schools who are registered with Federal... DEPARTMENT OF EDUCATION Proposed Information Collection Requests; Federal Student Aid; Foreign...

Handheld technology acceptance in radiologic science education and training programs

NASA Astrophysics Data System (ADS)

Powers, Kevin Jay

The purpose of this study was to explore the behavioral intention of directors of educational programs in the radiologic sciences to adopt handheld devices to aid in managing student clinical data. Handheld devices were described to participants as a technology representing a class of mobile electronic devices including, but not limited to, personal digital assistants such as a Palm TX, Apple iPod Touch, Apple iPad or Hewlett Packard iPaq, and cellular or smartphones with third generation mobile capabilities such as an Apple iPhone, Blackberry or Android device. The study employed a non-experimental, cross-sectional survey design to determine the potential of adopting handheld technologies based on the constructs of Davis's (1989) Technology Acceptance Model. An online self-report questionnaire survey instrument was used to gather study data from 551 entry level radiologic science programs specializing in radiography, radiation therapy, nuclear medicine and medical sonography. The study design resulted in a single point in time assessment of the relationship between the primary constructs of the Technology Acceptance Model: perceived usefulness and perceived ease of use, and the behavioral intention of radiography program directors to adopt the information technology represented by hand held devices. Study results provide justification for investing resources to promote the adoption of mobile handheld devices in radiologic science programs and study findings serve as a foundation for further research involving technology adoption in the radiologic sciences.

Trends in radiology and experimental research.

PubMed

Sardanelli, Francesco

2017-01-01

European Radiology Experimental , the new journal launched by the European Society of Radiology, is placed in the context of three general and seven radiology-specific trends. After describing the impact of population aging, personalized/precision medicine, and information technology development, the article considers the following trends: the tension between subspecialties and the unity of the discipline; attention to patient safety; the challenge of reproducibility for quantitative imaging; standardized and structured reporting; search for higher levels of evidence in radiology (from diagnostic performance to patient outcome); the increasing relevance of interventional radiology; and continuous technological evolution. The new journal will publish not only studies on phantoms, cells, or animal models but also those describing development steps of imaging biomarkers or those exploring secondary end-points of large clinical trials. Moreover, consideration will be given to studies regarding: computer modelling and computer aided detection and diagnosis; contrast materials, tracers, and theranostics; advanced image analysis; optical, molecular, hybrid and fusion imaging; radiomics and radiogenomics; three-dimensional printing, information technology, image reconstruction and post-processing, big data analysis, teleradiology, clinical decision support systems; radiobiology; radioprotection; and physics in radiology. The journal aims to establish a forum for basic science, computer and information technology, radiology, and other medical subspecialties.

Virus-Inspired Nanogenes Free from Man-Made Materials for Host-Specific Transfection and Bio-Aided MR Imaging.

PubMed

Zhu, Jing-Yi; Zhang, Ming-Kang; Ding, Xian-Guang; Qiu, Wen-Xiu; Yu, Wu-Yang; Feng, Jun; Zhang, Xian-Zheng

2018-05-01

Many viruses have a lipid envelope derived from the host cell membrane that contributes much to the host specificity and the cellular invasion. This study puts forward a virus-inspired technology that allows targeted genetic delivery free from man-made materials. Genetic therapeutics, metal ions, and biologically derived cell membranes are nanointegrated. Vulnerable genetic therapeutics contained in the formed "nanogene" can be well protected from unwanted attacks by blood components and enzymes. The surface envelope composed of cancer cell membrane fragments enables host-specific targeting of the nanogene to the source cancer cells and homologous tumors while effectively inhibiting recognition by macrophages. High transfection efficiency highlights the potential of this technology for practical applications. Another unique merit of this technology arises from the facile combination of special biofunction of metal ions with genetic therapy. Typically, Gd(III)-involved nanogene generates a much higher T 1 relaxation rate than the clinically used Gd magnetic resonance imaging agent and harvests the enhanced MRI contrast at tumors. This virus-inspired technology points out a distinctive new avenue for the disease-specific transport of genetic therapeutics and other biomacromolecules. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Methods and Algorithms for Computer-aided Engineering of Die Tooling of Compressor Blades from Titanium Alloy

NASA Astrophysics Data System (ADS)

Khaimovich, A. I.; Khaimovich, I. N.

2018-01-01

The articles provides the calculation algorithms for blank design and die forming fitting to produce the compressor blades for aircraft engines. The design system proposed in the article allows generating drafts of trimming and reducing dies automatically, leading to significant reduction of work preparation time. The detailed analysis of the blade structural elements features was carried out, the taken limitations and technological solutions allowed to form generalized algorithms of forming parting stamp face over the entire circuit of the engraving for different configurations of die forgings. The author worked out the algorithms and programs to calculate three dimensional point locations describing the configuration of die cavity.

Using Technology to Improve the Objectivity of Criminal Responsibility Evaluations.

PubMed

Vitacco, Michael J; Gottfried, Emily D; Batastini, Ashley B

2018-03-01

Criminal responsibility (or insanity) evaluations require forensic clinicians to reconstruct a defendant's decision-making abilities, behavioral control, and emotional state at the time of the criminal act. Forensic evaluators are ultimately tasked to evaluate whether an individual had the capacity to understand right from wrong, and in some jurisdictions, determine whether the defendant lacked substantial capacity to conform his behavior to the requirements of the law as a result of a threshold condition (e.g., mental illness). Insanity evaluations are inherently complex, because they require the clinician to determine someone's mental state at some point in the past (weeks, months, or even years). Recent research on insanity evaluations underscores significant problems with the reliability and validity of these evaluations. However, technological advances including social media (e.g., Facebook and Twitter), mandating that law enforcement videotape interrogations, and the use of body and dashboard cameras can aid clinicians in improving the precision and quality of insanity evaluations. This article discusses practical guidelines and ethics-related concerns regarding the use of technology to improve the objectivity of criminal responsibility evaluations. © 2018 American Academy of Psychiatry and the Law.

Overview of robotic colorectal surgery: Current and future practical developments

PubMed Central

Roy, Sudipta; Evans, Charles

2016-01-01

Minimal access surgery has revolutionised colorectal surgery by offering reduced morbidity and mortality over open surgery, while maintaining oncological and functional outcomes with the disadvantage of additional practical challenges. Robotic surgery aids the surgeon in overcoming these challenges. Uptake of robotic assistance has been relatively slow, mainly because of the high initial and ongoing costs of equipment but also because of limited evidence of improved patient outcomes. Advances in robotic colorectal surgery will aim to widen the scope of minimal access surgery to allow larger and more complex surgery through smaller access and natural orifices and also to make the technology more economical, allowing wider dispersal and uptake of robotic technology. Advances in robotic endoscopy will yield self-advancing endoscopes and a widening role for capsule endoscopy including the development of motile and steerable capsules able to deliver localised drug therapy and insufflation as well as being recharged from an extracorporeal power source to allow great longevity. Ultimately robotic technology may advance to the point where many conventional surgical interventions are no longer required. With respect to nanotechnology, surgery may eventually become obsolete. PMID:26981188

What is a Therapeutic HIV Vaccine?

MedlinePlus

... AIDS Drugs Clinical Trials Apps skip to content HIV Overview Home Understanding HIV/AIDS Fact Sheets What ... Send us an email What is a Therapeutic HIV Vaccine? Last Reviewed: August 16, 2017 Key Points ...

What is an Investigational HIV Drug?

MedlinePlus

... AIDS Drugs Clinical Trials Apps skip to content HIV Overview Home Understanding HIV/AIDS Fact Sheets What ... Send us an email What is an Investigational HIV Drug? Last Reviewed: August 25, 2017 Key Points ...

What is a Preventive HIV Vaccine?

MedlinePlus

... AIDS Drugs Clinical Trials Apps skip to content HIV Overview Home Understanding HIV/AIDS Fact Sheets What ... Send us an email What is a Preventive HIV Vaccine? Last Reviewed: August 16, 2017 Key Points ...

Generation and Repair of AID-initiated DNA Lesions in B Lymphocytes

PubMed Central

Chen, Zhangguo; Wang, Jing H.

2014-01-01

Activation-induced deaminase (AID) initiates the secondary antibody diversification process in B lymphocytes. In mammalian B cells, this process includes somatic hypermutation (SHM) and class switch recombination (CSR), both of which require AID. AID induces U:G mismatch lesions in DNA that are subsequently converted into point mutations or DNA double stranded breaks during SHM/CSR. In a physiological context, AID targets immunoglobulin (Ig) loci to mediate SHM/CSR. However, recent studies reveal genome-wide access of AID to numerous non-Ig loci. Thus, AID poses a threat to the genome of B cells if AID-initiated DNA lesions cannot be properly repaired. In this review, we focus on the molecular mechanisms that regulate the specificity of AID targeting and the repair pathways responsible for processing AID-initiated DNA lesions. PMID:24748462

Perceptions of the Design of Voice Output Communication Aids

ERIC Educational Resources Information Center

Judge, Simon; Townend, Gillian

2013-01-01

Background: Voice output communication aids (VOCAs) are a key form of aided communication within the field of augmentative and alternative communication (AAC). In recent years, rapid developments in technology have resulted in an explosion of devices available commercially, yet little research has been conducted into what people who use VOCAs…

The Problem of Feedback in Hearing Aids.

ERIC Educational Resources Information Center

Kates, James M.

1991-01-01

This paper discusses the problem of feedback in hearing aids and offers examples based on a computer simulation of hearing aid behavior. The available technology for dealing with feedback is reviewed, and the new digital signal-processing approaches which may finally solve the feedback problem are described. (Author/DB)

Implantable Heart Aid

NASA Technical Reports Server (NTRS)

1984-01-01

CPI's human-implantable automatic implantable defibrillator (AID) is a heart assist system, derived from NASA's space circuitry technology, that can prevent erratic heart action known as arrhythmias. Implanted AID, consisting of microcomputer power source and two electrodes for sensing heart activity, recognizes onset of ventricular fibrillation (VF) and delivers corrective electrical countershock to restore rhythmic heartbeat.

Whither High Technology?

ERIC Educational Resources Information Center

Levitt, Harry

1991-01-01

This article briefly describes sensory aids for individuals with hearing impairments, such as the visible speech translator, the cochlear implant, and the digital hearing aid, and identifies common trends. The article stresses factors affecting the development of sensory aids in the past and how these factors are likely to influence the future.…

"Aid to Thought"--Just Simulate It!

ERIC Educational Resources Information Center

Kinczkowski, Linda; Cardon, Phillip; Speelman, Pamela

2015-01-01

This paper provides examples of Aid-to-Thought uses in urban decision making, classroom laboratory planning, and in a ship antiaircraft defense system. Aid-to-Thought modeling and simulations are tools students can use effectively in a STEM classroom while meeting Standards for Technological Literacy Benchmarks O and R. These projects prepare…

Optical Docking Aid Containing Fresnel Lenses

NASA Technical Reports Server (NTRS)

Pierce, Cole J.

1995-01-01

Proposed device provides self-contained visual cues to aid in docking. Similar to devices used to guide pilots in landing on aircraft carriers. Positions and directions of beams of light give observer visual cues of position relative to docking target point. Optical assemblies generate directed, diverging beams of light that, together, mark approach path to docking point. Conceived for use in docking spacecraft at Space Station Freedom, device adapted to numerous industrial docking and alignment applications.

Challenges and Recent Developments in Hearing Aids: Part II. Feedback and Occlusion Effect Reduction Strategies, Laser Shell Manufacturing Processes, and Other Signal Processing Technologies

PubMed Central

Chung, King

2004-01-01

This is the second part of a review on the challenges and recent developments in hearing aids. Feedback and the occlusion effect pose great challenges in hearing aid design and usage. Yet, conventional solutions to feedback and the occlusion effect often create a dilemma: the solution to one often leads to the other. This review discusses the advanced signal processing strategies to reduce feedback and some new approaches to reduce the occlusion effect. Specifically, the causes of three types of feedback (acoustic, mechanical, and electromagnetic) are discussed. The strategies currently used to reduce acoustic feedback (i.e., adaptive feedback reduction algorithms using adaptive gain reduction, notch filtering, and phase cancellation strategies) and the design of new receivers that are built to reduce mechanical and electromagnetic feedback are explained. In addition, various new strategies (i.e., redesigned sound delivery devices and receiver-in-the-ear-canal hearing aid configuration) to reduce the occlusion effect are reviewed. Many manufacturers have recently adopted laser shell-manufacturing technologies to overcome problems associated with manufacturing custom hearing aid shells. The mechanisms of selected laser sintering and stereo lithographic apparatus and the properties of custom shells produced by these two processes are reviewed. Further, various new developments in hearing aid transducers, telecoils, channel-free amplification, open-platform programming options, rechargeable hearing aids, ear-level frequency modulated (FM) receivers, wireless Bluetooth FM systems, and wireless programming options are briefly explained and discussed. Finally, the applications of advanced hearing aid technologies to enhance other devices such as cochlear implants, hearing protectors, and cellular phones are discussed. PMID:15735871

Technology-Aided Leisure and Communication Opportunities for Two Post-Coma Persons Emerged from a Minimally Conscious State and Affected by Multiple Disabilities

ERIC Educational Resources Information Center

Lancioni, Giulio E.; O'Reilly, Mark F.; Singh, Nirbhay N.; Sigafoos, Jeff; Buonocunto, Francesca; Sacco, Valentina; Navarro, Jorge; Lanzilotti, Crocifissa; De Tommaso, Marina; Megna, Marisa; Oliva, Doretta

2013-01-01

This study assessed technology-aided programs for helping two post-coma persons, who had emerged from a minimally conscious state and were affected by multiple disabilities, to (a) engage with leisure stimuli and request caregiver's procedures, (b) send out and listen to text messages for communication with distant partners, and (c) combine…

Advanced control techniques for teleoperation in earth orbit

NASA Technical Reports Server (NTRS)

Bejczy, A. K.; Brooks, T. L.

1980-01-01

Emerging teleoperation tasks in space invite advancements in teleoperator control technology. This paper briefly summarizes the generic issues related to earth orbital applications of teleoperators, and describes teleoperator control technology development work including visual and non-visual sensors and displays, kinesthetic feedback and computer-aided controls. Performance experiments were carried out using sensor and computer aided controls with promising results which are briefly summarized.

A Survey of CAD/CAM Technology Applications in the U.S. Shipbuilding Industry

DTIC Science & Technology

1984-01-01

operation for drafting. Computer Aided Engineering (CAE) analysis is used primarily to determine the validity of design characteristics and produc- tion...include time standard generation, sea trial analysis , and group Systems integration While no systems surveyed Aided Design (CAD) is the technology... analysis . is the largest problem involving software packages. are truly integrated, many are interfaced. Computer most interfaced category with links

Computer-Aided Argument Mapping in an EFL Setting: Does Technology Precede Traditional Paper and Pencil Approach in Developing Critical Thinking?

ERIC Educational Resources Information Center

Eftekhari, Maryam; Sotoudehnama, Elaheh; Marandi, S. Susan

2016-01-01

Developing higher-order critical thinking skills as one of the central objectives of education has been recently facilitated via software packages. Whereas one such technology as computer-aided argument mapping is reported to enhance levels of critical thinking (van Gelder 2001), its application as a pedagogical tool in English as a Foreign…

Perceived Barriers and Facilitators of Using a Web-Based Interactive Decision Aid for Colorectal Cancer Screening in Community Practice Settings: Findings From Focus Groups With Primary Care Clinicians and Medical Office Staff

PubMed Central

2013-01-01

Background Information is lacking about the capacity of those working in community practice settings to utilize health information technology for colorectal cancer screening. Objective To address this gap we asked those working in community practice settings to share their perspectives about how the implementation of a Web-based patient-led decision aid might affect patient-clinician conversations about colorectal cancer screening and the day-to-day clinical workflow. Methods Five focus groups in five community practice settings were conducted with 8 physicians, 1 physician assistant, and 18 clinic staff. Focus groups were organized using a semistructured discussion guide designed to identify factors that mediate and impede the use of a Web-based decision aid intended to clarify patient preferences for colorectal cancer screening and to trigger shared decision making during the clinical encounter. Results All physicians, the physician assistant, and 8 of the 18 clinic staff were active participants in the focus groups. Clinician and staff participants from each setting reported a belief that the Web-based patient-led decision aid could be an informative and educational tool; in all but one setting participants reported a readiness to recommend the tool to patients. The exception related to clinicians from one clinic who described a preference for patients having fewer screening choices, noting that a colonoscopy was the preferred screening modality for patients in their clinic. Perceived barriers to utilizing the Web-based decision aid included patients’ lack of Internet access or low computer literacy, and potential impediments to the clinics’ daily workflow. Expanding patients’ use of an online decision aid that is both easy to access and understand and that is utilized by patients outside of the office visit was described as a potentially efficient means for soliciting patients’ screening preferences. Participants described that a system to link the online decision aid to a computerized reminder system could promote a better understanding of patients’ screening preferences, though some expressed concern that such a system could be difficult to keep up and running. Conclusions Community practice clinicians and staff perceived the Web-based decision aid technology as promising but raised questions as to how the technology and resultant information would be integrated into their daily practice workflow. Additional research investigating how to best implement online decision aids should be conducted prior to the widespread adoption of such technology so as to maximize the benefits of the technology while minimizing workflow disruptions. PMID:24351420

77 FR 72195 - World AIDS Day, 2012

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-05

... set last year. We are working with partners at home and abroad to reduce new infections in adults... institutions. We stand at a tipping point in the fight against HIV/AIDS, and working together, we can realize... goal. We can beat this disease. On World AIDS Day, in memory of those no longer with us and in...

Undergraduates Who Do Not Apply for Financial Aid. Data Point. NCES 2016-406

ERIC Educational Resources Information Center

Ifill, Nicole

2016-01-01

This report is based on data from the 2011-12 National Postsecondary Student Aid Study (NPSAS:12), a large, nationally representative sample survey of students that focuses on how they finance their education. NPSAS includes data on the application for and receipt of financial aid, including grants, loans, assistantships, scholarships,…

Head-Mounted Display Technology for Low Vision Rehabilitation and Vision Enhancement

PubMed Central

Ehrlich, Joshua R.; Ojeda, Lauro V.; Wicker, Donna; Day, Sherry; Howson, Ashley; Lakshminarayanan, Vasudevan; Moroi, Sayoko E.

2017-01-01

Purpose To describe the various types of head-mounted display technology, their optical and human factors considerations, and their potential for use in low vision rehabilitation and vision enhancement. Design Expert perspective. Methods An overview of head-mounted display technology by an interdisciplinary team of experts drawing on key literature in the field. Results Head-mounted display technologies can be classified based on their display type and optical design. See-through displays such as retinal projection devices have the greatest potential for use as low vision aids. Devices vary by their relationship to the user’s eyes, field of view, illumination, resolution, color, stereopsis, effect on head motion and user interface. These optical and human factors considerations are important when selecting head-mounted displays for specific applications and patient groups. Conclusions Head-mounted display technologies may offer advantages over conventional low vision aids. Future research should compare head-mounted displays to commonly prescribed low vision aids in order to compare their effectiveness in addressing the impairments and rehabilitation goals of diverse patient populations. PMID:28048975

Next gen perception and cognition: augmenting perception and enhancing cognition through mobile technologies

NASA Astrophysics Data System (ADS)

Goma, Sergio R.

2015-03-01

In current times, mobile technologies are ubiquitous and the complexity of problems is continuously increasing. In the context of advancement of engineering, we explore in this paper possible reasons that could cause a saturation in technology evolution - namely the ability of problem solving based on previous results and the ability of expressing solutions in a more efficient way, concluding that `thinking outside of brain' - as in solving engineering problems that are expressed in a virtual media due to their complexity - would benefit from mobile technology augmentation. This could be the necessary evolutionary step that would provide the efficiency required to solve new complex problems (addressing the `running out of time' issue) and remove the communication of results barrier (addressing the human `perception/expression imbalance' issue). Some consequences are discussed, as in this context the artificial intelligence becomes an automation tool aid instead of a necessary next evolutionary step. The paper concludes that research in modeling as problem solving aid and data visualization as perception aid augmented with mobile technologies could be the path to an evolutionary step in advancing engineering.

Medical communication and technology: a video-based process study of the use of decision aids in primary care consultations.

PubMed

Kaner, Eileen; Heaven, Ben; Rapley, Tim; Murtagh, Madeleine; Graham, Ruth; Thomson, Richard; May, Carl

2007-01-10

Much of the research on decision-making in health care has focused on consultation outcomes. Less is known about the process by which clinicians and patients come to a treatment decision. This study aimed to quantitatively describe the behaviour shown by doctors and patients during primary care consultations when three types of decision aids were used to promote treatment decision-making in a randomised controlled trial. A video-based study set in an efficacy trial which compared the use of paper-based guidelines (control) with two forms of computer-based decision aids (implicit and explicit versions of DARTS II). Treatment decision concerned warfarin anti-coagulation to reduce the risk of stroke in older patients with atrial fibrillation. Twenty nine consultations were video-recorded. A ten-minute 'slice' of the consultation was sampled for detailed content analysis using existing interaction analysis protocols for verbal behaviour and ethological techniques for non-verbal behaviour. Median consultation times (quartiles) differed significantly depending on the technology used. Paper-based guidelines took 21 (19-26) minutes to work through compared to 31 (16-41) minutes for the implicit tool; and 44 (39-55) minutes for the explicit tool. In the ten minutes immediately preceding the decision point, GPs dominated the conversation, accounting for 64% (58-66%) of all utterances and this trend was similar across all three arms of the trial. Information-giving was the most frequent activity for both GPs and patients, although GPs did this at twice the rate compared to patients and at higher rates in consultations involving computerised decision aids. GPs' language was highly technically focused and just 7% of their conversation was socio-emotional in content; this was half the socio-emotional content shown by patients (15%). However, frequent head nodding and a close mirroring in the direction of eye-gaze suggested that both parties were active participants in the conversation Irrespective of the arm of the trial, both patients' and GPs' behaviour showed that they were reciprocally engaged in these consultations. However, even in consultations aimed at promoting shared decision-making, GPs' were verbally dominant, and they worked primarily as information providers for patients. In addition, computer-based decision aids significantly prolonged the consultations, particularly the later phases. These data suggest that decision aids may not lead to more 'sharing' in treatment decision-making and that, in their current form, they may take too long to negotiate for use in routine primary care.

Taking the health aid debate to the subnational level: the impact and allocation of foreign health aid in Malawi

PubMed Central

Marty, Robert; Dolan, Carrie B; Leu, Matthias; Runfola, Daniel

2017-01-01

Objective Cross-national studies provide inconclusive results as to the effectiveness of foreign health aid. We highlight a novel application of using subnational data to evaluate aid impacts, using Malawi as a case study. Design We employ two rounds of nationally representative household surveys (2004/2005 and 2010/2011) and geo-referenced foreign aid data. We examine the determinants of Malawi's traditional authorities receiving aid according to health, environmental risk, socioeconomic and political factors. We use two approaches to estimate the impact of aid on reducing malaria prevalence and increasing healthcare quality: difference-in-difference models, which include traditional authority and month-of-interview fixed effects and control for individual and household level time-varying factors, and entropy balancing, where models balance on health-related and socioeconomic baseline characteristics. General health aid and four specific health aid sectors are examined. Results Traditional authorities with greater proportions of individuals living in urban areas, more health facilities and greater proportions of those in major ethnic groups were more likely to receive aid. Difference-in-difference models show health infrastructure and parasitic disease control aid reduced malaria prevalence by 1.20 (95% CI −0.36 to 2.76) and 2.20 (95% CI 0.43 to 3.96) percentage points, respectively, and increased the likelihood of individuals reporting healthcare as more than adequate by 12.1 (95% CI 1.51 to 22.68) and 14.0 (95% CI 0.11 to 28.11) percentage points. Entropy balancing shows similar results. Conclusions Aid was targeted to areas with greater existing health infrastructure rather than areas most in need, but still effectively reduced malaria prevalence and enhanced self-reported healthcare quality. PMID:28588997

D-Dimer Levels before HIV Seroconversion Remain Elevated Even after Viral Suppression and Are Associated with an Increased Risk of Non-AIDS Events.

PubMed

Freiberg, Matthew S; Bebu, Ionut; Tracy, Russell; So-Armah, Kaku; Okulicz, Jason; Ganesan, Anuradha; Armstrong, Adam; O'Bryan, Thomas; Rimland, David; Justice, Amy C; Agan, Brian K

2016-01-01

The mechanism underlying the excess risk of non-AIDS diseases among HIV infected people is unclear. HIV associated inflammation/hypercoagulability likely plays a role. While antiretroviral therapy (ART) may return this process to pre-HIV levels, this has not been directly demonstrated. We analyzed data/specimens on 249 HIV+ participants from the US Military HIV Natural History Study, a prospective, multicenter observational cohort of >5600 active duty military personnel and beneficiaries living with HIV. We used stored blood specimens to measure D-dimer and Interleukin-6 (IL-6) at three time points: pre-HIV seroconversion, ≥6 months post-HIV seroconversion but prior to ART initiation, and ≥6 months post-ART with documented HIV viral suppression on two successive evaluations. We evaluated the changes in biomarker levels between time points, and the association between these biomarker changes and future non-AIDS events. During a median follow-up of 3.7 years, there were 28 incident non-AIDS diseases. At ART initiation, the median CD4 count was 361cells/mm3; median duration of documented HIV infection 392 days; median time on ART was 354 days. Adjusted mean percent increase in D-dimer levels from pre-seroconversion to post-ART was 75.1% (95% confidence interval 24.6-148.0, p = 0.002). This increase in D-dimer was associated with a significant 22% increase risk of future non-AIDS events (p = 0.03). Changes in IL-6 levels across time points were small and not associated with future non-AIDS events. In conclusion, ART initiation and HIV viral suppression does not eliminate HIV associated elevation in D-dimer levels. This residual pathology is associated with an increased risk of future non-AIDS diseases.

Low aerial imagery - an assessment of georeferencing errors and the potential for use in environmental inventory

NASA Astrophysics Data System (ADS)

Smaczyński, Maciej; Medyńska-Gulij, Beata

2017-06-01

Unmanned aerial vehicles are increasingly being used in close range photogrammetry. Real-time observation of the Earth's surface and the photogrammetric images obtained are used as material for surveying and environmental inventory. The following study was conducted on a small area (approximately 1 ha). In such cases, the classical method of topographic mapping is not accurate enough. The geodetic method of topographic surveying, on the other hand, is an overly precise measurement technique for the purpose of inventorying the natural environment components. The author of the following study has proposed using the unmanned aerial vehicle technology and tying in the obtained images to the control point network established with the aid of GNSS technology. Georeferencing the acquired images and using them to create a photogrammetric model of the studied area enabled the researcher to perform calculations, which yielded a total root mean square error below 9 cm. The performed comparison of the real lengths of the vectors connecting the control points and their lengths calculated on the basis of the photogrammetric model made it possible to fully confirm the RMSE calculated and prove the usefulness of the UAV technology in observing terrain components for the purpose of environmental inventory. Such environmental components include, among others, elements of road infrastructure, green areas, but also changes in the location of moving pedestrians and vehicles, as well as other changes in the natural environment that are not registered on classical base maps or topographic maps.

The influence of non-linear frequency compression on the perception of music by adults with a moderate to sever hearing loss: subjective impressions.

PubMed

Uys, Marinda; Pottas, Lidia; Vinck, Bart; van Dijk, Catherine

2012-12-01

To date, the main direction in frequency-lowering hearing aid studies has been in relation to speech perception abilities. With improvements in hearing aid technology, interest in musical perception as a dimension that could improve hearing aid users' quality of life has grown. The purpose of this study was to determine the influence of non-linear frequency compression (NFC) on hearing aid users' subjective impressions of listening to music. DESIGN & SAMPLE: A survey research design was implemented to elicit participants' (N=40) subjective impressions of musical stimuli with and without NFC. The use of NFC significantly improved hearing aid users' perception of the musical qualities of overall fidelity, tinniness and reverberance. Although participants preferred to listen to the loudness, fullness, crispness, naturalness and pleasantness of music with the use of NFC, these benefits were not significant. The use of NFC can increase hearing aid users' enjoyment and appreciation of music. Given that a relatively large percentage of hearing aid users express a loss of enjoyment of music, audiologists should not ignore the possible benefits of NFC, especially if one takes into account that previous research indicates speech perception benefits with this technology.

Conception d'un outil d'aide a la decision de technologies de fabrication additive en milieu aeronautique

NASA Astrophysics Data System (ADS)

Buvat, Gael

La fabrication additive offre une opportunite d'amelioration des methodes de productions de pieces. Cependant, les technologies de fabrication additive sont diverses, les fournisseurs de services sont multiples et peu de personnel est forme pour operer sur ces technologies. L'objectif de cette etude est d'emettre une suggestion de concepts d'outils d'aide a la decision de technologies, de materiaux et de post-traitements de fabrication additive en milieu aeronautique. Trois sous-objectifs sont employes. Premierement, la definition des criteres de decision de technologies, de materiaux et de post-traitements de fabrication additive. Ensuite, l'elaboration d'un cahier des charges de l'outil d'aide a la decision en accord avec les besoins industriels du secteur aeronautique. Et enfin, la suggestion de trois concepts d'outils d'aide a la decision et leur evaluation par comparaison au cahier des charges etabli. Les criteres captures aupres de 11 industriels concernent des criteres de couts, de qualite, de conception et de delai d'obtention. Ensuite, nous avons elabore un cahier des charges permettant de reunir les besoins des industriels du secteur aeronautique selon trois axes qui constituent la colonne vertebrale des outils d'aide a la decision : une suggestion d'interface utilisateur, une suggestion de bases de donnees et un moteur de selection des technologies, des materiaux et des post-traitements de fabrication additive. La convivialite de l'interface utilisateur, l'evaluation de la qualite souhaitee par l'utilisateur et la prise en compte des etudes de cas realisees par le moteur de selection sont exemples de besoins que nous avons identifie au sein de cette etude. Nous avons ensuite transcrit ces besoins en specifications techniques pour permettre une evaluation du niveau de satisfaction des industriels au travers d'un pointage des trois concepts suggeres. Ces trois concepts d'outils d'aide a la decision ont ete realises respectivement grâce a Microsoft ExcelRTM, Microsoft AccessRTM ainsi qu'une plateforme en ligne associee a l'outil d'apprentissage statistique RapidMinerRTM. Ce dernier outil en ligne a retenu l'attention des ingenieurs qui l'ont evalue principalement du fait de la prise en compte des etudes de cas dans la suggestion preferentielle de technologies, de materiaux et de post-traitements.

Design and Development of 3D Printed Teaching Aids for Architecture Education

ERIC Educational Resources Information Center

Song, Min Jeong; Ha, Euna; Goo, Sang-Kwon; Cho, JaeKyung

2018-01-01

This article describes how the implementation of 3D printing in classrooms has brought many opportunities to educators as it provides affordability and accessibility in creating and customizing teaching aids. The study reports on the process of fabricating teaching aids for architecture education using 3D printing technologies. The practice-based…

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

Efficacy of Directional Microphones in Hearing Aids Equipped with Wireless Synchronization Technology.

PubMed

Geetha, Chinnaraj; Tanniru, Kishore; Rajan, R Raja

2017-04-01

This study aimed to evaluate the use of directionality in hearing aids with wireless synchronization on localization and speech intelligibility in noise. This study included 25 individuals with bilateral mild to moderate flat sensorineural hearing loss. For the localization experiment, eight loudspeakers (Genelec 8020B) arranged in a circle covering a 0-360° angle and the Cubase 6 software were used for presenting the stimulus. A car horn of 260 ms was presented from these loudspeakers, one at a time, randomly. The listener was instructed to point to the direction of the source. The degree of the localization error was obtained with and without directionality and wireless synchronization options. For speech perception in a noise experiment, signal to noise ratio-50 (SNR-50) was obtained using sentences played through a speaker at a fixed angle of 0°. A calibrated eight-talker speech babble was used as noise and the babble was routed either through 0°, 90°, 270° (through one speaker at a time) or through both 90° and 270° speakers. The results revealed that the conditions where both the wireless synchronization and directionality were activated resulted in a significantly better performance in both localization and speech perception in noise tasks. It can be concluded that the directionality in the wireless synchronization hearing aids coordinates with each other binaurally for better preservation of binaural cues, thus reducing the localization errors and improving speech perception in noise. The results of this study could be used to counsel and justify the selection of the directional wireless synchronization hearing aids.

Instructional Aides.

ERIC Educational Resources Information Center

Nielsen, Earl T.

This monograph is designed to assist administrative school personnel in selecting, training, and retaining the best qualified instructional aides available. It covers five areas: (1) employment procedures--outlining important points under recruitment, applications, examinations, interviews, and selection; (2) payroll procedures--outlining how to…

Study on digital teeth selection and virtual teeth arrangement for complete denture.

PubMed

Yu, Xiaoling; Cheng, Xiaosheng; Dai, Ning; Chen, Hu; Yu, Changjiang; Sun, Yuchun

2018-03-01

In dentistry, the complete denture is a conventional treatment for edentulous patients. The computer-aided design and computer-aided manufacturing (CAD/CAM) has been applied on the digital complete denture which is developed rapidly. Tooth selection and arrangement is one of the most important parts in digital complete denture. In this paper, we propose a new method of personalized teeth arrangement. This paper presents a method of arranging teeth virtually for a complete denture. First, scan and extract the feature points of the 3D triangular mesh data of artificial teeth (PLY format), then establish a tooth selection system. Second, scan and mark the anatomic characteristics of the maxillary and mandibular cast surfaces, such as facial midline, the curve of the arches. With the enter information, the study calculates the common arrangement lines of artificial teeth. Third, select the preferred artificial teeth and automatically arrange them virtually in the correct position by using our own software. After that, design the gingival part of the dentures on the basic of the arranged teeth on the screen and then fabricated it by using Computerized Numerical Control (CNC) technology, Rapid Prototyping (RP) technology or 3D printer technology. Finally, select artificial teeth were embedded in wax rims. This system can choose artificial teeth reasonably and the teeth placement can meet the dentist's request to a certain extent, whereas all the operations are based on the medical principles. The study performed here involves computer sciences, medicine, and dentistry, a teeth selection system was proposed and virtual teeth arrangement was described. This study has the capacity of helping operators to select teeth, which improved the accuracy of tooth arrangement, and customized complete denture. Copyright © 2017 Elsevier B.V. All rights reserved.

Topics in programmable automation. [for materials handling, inspection, and assembly

NASA Technical Reports Server (NTRS)

Rosen, C. A.

1975-01-01

Topics explored in the development of integrated programmable automation systems include: numerically controlled and computer controlled machining; machine intelligence and the emulation of human-like capabilities; large scale semiconductor integration technology applications; and sensor technology for asynchronous local computation without burdening the executive minicomputer which controls the whole system. The role and development of training aids, and the potential application of these aids to augmented teleoperator systems are discussed.

2016 RAD-AID Conference on International Radiology for Developing Countries: Gaps, Growth, and United Nations Sustainable Development Goals.

PubMed

Mollura, Daniel J; Soroosh, Garshasb; Culp, Melissa P

2017-06-01

The 2016 RAD-AID Conference analyzed the accelerated global activity in the radiology community that is transforming medical imaging into an effective spearhead of health care capacity building in low- and middle-income countries. Global health efforts historically emphasized disaster response, crisis zones, and infectious disease outbreaks. However, the projected doubling of cancer and cardiovascular deaths in developing countries in the next 15 years and the need for higher technology screening and diagnostic technologies in low-resource regions, as articulated by the United Nations' new Sustainable Development Goals of 2016, is heightening the role of radiology in global health. Academic US-based radiology programs with RAD-AID chapters achieved a threefold increase in global health project offerings for trainees in the past 5 years. RAD-AID's nonprofit radiology volunteer corps continue to grow by more than 40% yearly, with a volunteer base of 5,750 radiology professionals, serving in 23 countries, donating close to 20,000 pro bono hours globally in 2016. As a high-technology specialty interfacing with nearly all medical and surgical disciplines, radiology underpins vital health technology infrastructure, such as digital imaging archives, electronic medical records, and advanced diagnosis and treatment, essential for long-term future health care capacity in underserved areas of the world. Published by Elsevier Inc.

Basic research and 12 years of clinical experience in computer-assisted navigation technology: a review.

PubMed

Ewers, R; Schicho, K; Undt, G; Wanschitz, F; Truppe, M; Seemann, R; Wagner, A

2005-01-01

Computer-aided surgical navigation technology is commonly used in craniomaxillofacial surgery. It offers substantial improvement regarding esthetic and functional aspects in a range of surgical procedures. Based on augmented reality principles, where the real operative site is merged with computer generated graphic information, computer-aided navigation systems were employed, among other procedures, in dental implantology, arthroscopy of the temporomandibular joint, osteotomies, distraction osteogenesis, image guided biopsies and removals of foreign bodies. The decision to perform a procedure with or without computer-aided intraoperative navigation depends on the expected benefit to the procedure as well as on the technical expenditure necessary to achieve that goal. This paper comprises the experience gained in 12 years of research, development and routine clinical application. One hundred and fifty-eight operations with successful application of surgical navigation technology--divided into five groups--are evaluated regarding the criteria "medical benefit" and "technical expenditure" necessary to perform these procedures. Our results indicate that the medical benefit is likely to outweight the expenditure of technology with few exceptions (calvaria transplant, resection of the temporal bone, reconstruction of the orbital floor). Especially in dental implantology, specialized software reduces time and additional costs necessary to plan and perform procedures with computer-aided surgical navigation.

End-of-life decision making by family caregivers of persons with advanced dementia: A literature review of decision aids.

PubMed

Xie, Bo; Berkley, Amy S; Kwak, Jung; Fleischmann, Kenneth R; Champion, Jane Dimmitt; Koltai, Kolina S

2018-01-01

To investigate existing knowledge in the literature about end-of-life decision making by family caregivers of persons with dementia, focusing on decision aids for caregivers of persons with advanced dementia, and to identify gaps in the literature that can guide future research. A literature review through systematic searches in PubMed, CINAHL Plus with Full Text, and PsycINFO was conducted in February 2018; publications with full text in English and published in the past 10 years were selected in multiple steps. The final sample included five decision aids with predominantly Caucasian participants; three of them had control groups, and three used audiovisual technology in presenting the intervention materials. No other technology was used in any intervention. Existing interventions lacked tailoring of information to caregivers' preferences for different types and amounts of information necessary to make decisions consistent with patients' values. Research is needed in exploring the use of technology in decision aids that could provide tailored information to facilitate caregivers' decision making. More diverse samples are needed.

Latvian Piano Teachers' Views on an Ideal Teaching Aid for Pupils--Young Pianists

ERIC Educational Resources Information Center

Zimele-Steina, Ineta

2015-01-01

Currently, in Latvia, an adequate teaching aid that would meet the major requirements of young novice pianists is not available. Consequently, a question arises: "What could be an ideal teaching aid for them?" The opinion survey of 165 piano teachers from all regions of Latvia was carried out according to a three-point scale, in which 30…

Financial Aid and First-Year Collegiate GPA: A Regression Discontinuity Approach

ERIC Educational Resources Information Center

Curs, Bradley R.; Harper, Casandra E.

2012-01-01

Using a regression discontinuity design, we investigate whether a merit-based financial aid program has a causal effect on the first-year grade point average of first-time out-of-state freshmen at the University of Oregon. Our results indicate that merit-based financial aid has a positive and significant effect on first-year collegiate grade point…

The application of CAD / CAM technology in Dentistry

NASA Astrophysics Data System (ADS)

Susic, I.; Travar, M.; Susic, M.

2017-05-01

Information and communication technologies have found their application in the healthcare sector, including the frameworks of modern dentistry. CAD / CAM application in dentistry is the process by which is attained finished dental restoration through fine milling process of ready ceramic blocks. CAD / CAM is an acronym of english words Computer-Aided-Design (CAD) / Computer-Aided-Manufacture (CAM), respectively dental computer aided design and computer aided manufacture of inlays, onlays, crowns and bridges. CAD / CAM technology essentially allows you to create a two-dimensional and three-dimensional models and their materialization by numerical controlled machines. In order to operate more efficiently, reduce costs, increase user/patient satisfaction and ultimately achieve profits, many dental offices in the world have their attention focused on implementation of modern IT solutions in everyday practice. In addition to the specialized clinic management software, inventory control, etc., or hardware such as the use of lasers in cosmetic dentistry or intraoral scanning, recently the importance is given to the application of CAD / CAM technology in the field of prosthetic. After the removal of pathologically altered tooth structure, it is necessary to achieve restoration that will be most similar to the anatomy of a natural tooth. Applying CAD / CAM technology on applicable ceramic blocks it can be obtained very quick, but also very accurate restoration, in the forms of inlays, onlays, bridges and crowns. The paper presents the advantages of using this technology as well as satisfaction of the patients and dentists by using systems as: Cercon, Celay, Cerec, Lava, Everest, which represent imperative of modern dentistry in creating fixed dental restorations.

[An investigation of psychological state at different stages of occupational AIDS exposure and related influencing factors in Nanning, China].

PubMed

Lin, Q; Ge, X M; Mo, J C; Li, S S; Chen, C C; Chen, S Y

2016-10-20

Objective: To investigate the changes in psychological state after occupational exposure in the AIDS occupational exposure population and related influencing factors, and to provide baseline data and a basis for related departments to conduct mental health prevention and intervention for personnel with occupational AIDS exposure. Methods: AIDS risk assessment was performed for all personnel with occupational AIDS exposure in 2014 in Nanning, China, and the Symptom Checklist - 90 (SCL - 90) psychological scale was used for psychological state evaluation at 24 hours, 1 week, and 3 months after occupational exposure in all persons who met the research criteria. Results: Most of the persons with occupational AIDS exposure came from secondary and tertiary hospitals (85%) , and nurses accounted for the highest percentage (78.3% ). The age ranged from 21 to 50 years, and the mean age was 31.02 ± 7.92 years. The persons with occupational AIDS exposure aged 20~29 years accounted for the highest percentage (51.6%) , and most persons (76.7%) graduated from junior colleges. Compared with the adult norm, there was significant increases in the total psychological score and the number of positive items after occupational exposure ( P <0.05). The scores of all items at 24 hours were significantly higher than those at the other time points, and the scores of all items gradually decreased over time ( F =227.24, 267.57, and 287.46, P <0.05). Compared with the adult norm, there were significant increases in the factor points at 24 hours and significant reductions in the factor points at 3 months ( P <0.05). Compared with those at 24 hours, the factor scores at 3 months decreased significantly ( P <0.05). Conclusion: Occupational AIDS exposure affects the mental status of related personnel, and the mental status at 24 hours after exposure is poor. Related departments should provide corresponding psychological counseling for the occupational exposure population at different exposure times.

Point process methods in epidemiology: application to the analysis of human immunodeficiency virus/acquired immunodeficiency syndrome mortality in urban areas.

PubMed

Quesada, Jose Antonio; Melchor, Inmaculada; Nolasco, Andreu

2017-05-26

The analysis of spatio-temporal patterns of disease or death in urban areas has been developed mainly from the ecological studies approach. These designs may have some limitations like the ecological fallacy and instability with few cases. The objective of this study was to apply the point process methodology, as a complement to that of aggregated data, to study HIV/AIDS mortality in men in the city of Alicante (Spain). A case-control study in residents in the city during the period 2004-2011 was designed. Cases were men who died from HIV/AIDS and controls represented the general population, matched by age to cases. The risk surfaces of death over the city were estimated using the log-risk function of intensities, and we contrasted their temporal variations over the two periods. High risk significant areas of death by HIV/AIDS, which coincide with the most deprived areas in the city, were detected. Significant spatial change of the areas at risk between the periods studied was not detected. The point process methodology is a useful tool to analyse the patterns of death by HIV/AIDS in urban areas.

Converting a C-130 Hercules into a Compound Helicopter: A Conceptual Design Study

NASA Technical Reports Server (NTRS)

Kottapalli, Anjaney P.; Harris, Franklin D.

2012-01-01

Currently, the US Military and NASA are investigating the feasibility of a Vertical/Short Take Off and Landing (VSTOL) aircraft that can provide invaluable aid in the combat theater and significantly improve the civil transportation system. The nominal military mission requirement calls for a 28-ton payload heavy lift capability while the civilian requirements calls for a 90-passenger, 1000-nm range, airliner, as noted in Reference 1. To aid in these aircraft requirements, the present study examined the conversion of a Lockheed Martin C-130 Hercules into a compound aircraft, which would demonstrate the technology required by a much larger version. The present study examined various configurations and rotor blade designs in order to fulfill the nominal mission described previously. It was shown that the initial design of a 180 ft diameter rotor to lift 155,000 lb was not feasible due to material constraints. A revised design, in which the rotor radius was reduced to 55 ft, met the given constraints but required too much power. The decision was made to move to a twin rotor compound to take advantage of the increased disc area and drop the need for anti torque devices. Following this design shift, a new design point was found where all five constraints were met and the power requirements were deemed reasonable. This twin-rotor design was used in NDARC to provide a complete sizing analysis of the chosen design point.

PowerPoint or chalk and talk: Perceptions of medical students versus dental students in a medical college in India.

PubMed

Seth, Vikas; Upadhyaya, Prerna; Ahmad, Mushtaq; Moghe, Vijay

2010-01-01

To assess students' perceptions of the impact of PowerPoint (PPT) presentations in lectures in comparison to the traditional chalk and talk method and lectures using transparencies and overhead projector (TOHP). The study analyzes the preferences for teaching aids of medical students versus dental students. Second year medical and dental undergraduates were asked to fill in a nine-item questionnaire about their perceptions of the three lecture delivery methods. Following analysis of the questionnaire the students were interviewed further. The results were analyzed separately for medical and dental students to see if there was any difference in their perceptions. The majority of the medical students (65.33%) preferred PPT presentations, while 15.16% of students preferred the lectures using chalkboard, and 19.51% preferred TOHP for teaching (P < 0.001). Of the dental students: 41.84% preferred chalkboard, 31.21% preferred TOHP, and 25.85% students preferred PPT presentations in the lectures (P < 0.05). Some important comments of the students were also recorded on interview which could be valuable for the medical teachers. The medical students clearly preferred the use of PPT presentations while the dental students did not. The study does not bring out evidence based superiority of any lecture delivery method. It appears that in the hands of a trained teacher any teaching aid would be appropriate and effective. This highlights the need for formal training in teaching technologies to develop good presentation skills and thus motivate the students.

Intelligent computer aided training systems in the real world: Making the technology accessible to the educational mainstream

NASA Technical Reports Server (NTRS)

Kovarik, Madeline

1993-01-01

Intelligent computer aided training systems hold great promise for the application of this technology to mainstream education and training. Yet, this technology, which holds such a vast potential impact for the future of education and training, has had little impact beyond the enclaves of government research labs. This is largely due to the inaccessibility of the technology to those individuals in whose hands it can have the greatest impact, teachers and educators. Simply throwing technology at an educator and expecting them to use it as an effective tool is not the answer. This paper provides a background into the use of technology as a training tool. MindLink, developed by HyperTech Systems, provides trainers with a powerful rule-based tool that can be integrated directly into a Windows application. By embedding expert systems technology it becomes more accessible and easier to master.

Strategies for the Creation, Design and Implementation of Effective Interactive Computer-Aided Learning Software in Numerate Business Subjects--The Byzantium Experience.

ERIC Educational Resources Information Center

Wilkinson-Riddle, G. J.; Patel, Ashok

1998-01-01

Discusses courseware development, including intelligent tutoring systems, under the Teaching and Learning Technology Programme and the Byzantium project that was designed to define computer-aided learning performance standards suitable for numerate business subjects; examine reasons to use computer-aided learning; and improve access to educational…

EVALUATION AND DEVELOPMENT OF SENSORY AIDS AND DEVICES. FINAL REPORT. (TITLE SUPPLIED).

ERIC Educational Resources Information Center

Massachusetts Inst. of Tech., Cambridge. Sensory Aids Evaluation and Development Center.

THIS REPORT PRESENTS INFORMATION ON THE DEVELOPMENT AND EVALUATION OF SENSORY AIDS AT THE SENSORY AIDS EVALUATION AND DEVELOPMENT CENTER AT THE MASSACHUSETTS INSTITUTE OF TECHNOLOGY (MIT) BETWEEN OCTOBER 1965 AND NOVEMBER 1966. INCLUDED ARE (1) THE DESIGN, CONSTRUCTION, AND TESTING OF A RELIABLE MONOTYPE TAPE READER WHICH WILL BE USED IN…

Actuator-Assisted Calibration of Freehand 3D Ultrasound System.

PubMed

Koo, Terry K; Silvia, Nathaniel

2018-01-01

Freehand three-dimensional (3D) ultrasound has been used independently of other technologies to analyze complex geometries or registered with other imaging modalities to aid surgical and radiotherapy planning. A fundamental requirement for all freehand 3D ultrasound systems is probe calibration. The purpose of this study was to develop an actuator-assisted approach to facilitate freehand 3D ultrasound calibration using point-based phantoms. We modified the mathematical formulation of the calibration problem to eliminate the need of imaging the point targets at different viewing angles and developed an actuator-assisted approach/setup to facilitate quick and consistent collection of point targets spanning the entire image field of view. The actuator-assisted approach was applied to a commonly used cross wire phantom as well as two custom-made point-based phantoms (original and modified), each containing 7 collinear point targets, and compared the results with the traditional freehand cross wire phantom calibration in terms of calibration reproducibility, point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time. Results demonstrated that the actuator-assisted single cross wire phantom calibration significantly improved the calibration reproducibility and offered similar point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time with respect to the freehand cross wire phantom calibration. On the other hand, the actuator-assisted modified "collinear point target" phantom calibration offered similar precision and accuracy when compared to the freehand cross wire phantom calibration, but it reduced the data acquisition time by 57%. It appears that both actuator-assisted cross wire phantom and modified collinear point target phantom calibration approaches are viable options for freehand 3D ultrasound calibration.

Actuator-Assisted Calibration of Freehand 3D Ultrasound System

PubMed Central

2018-01-01

Freehand three-dimensional (3D) ultrasound has been used independently of other technologies to analyze complex geometries or registered with other imaging modalities to aid surgical and radiotherapy planning. A fundamental requirement for all freehand 3D ultrasound systems is probe calibration. The purpose of this study was to develop an actuator-assisted approach to facilitate freehand 3D ultrasound calibration using point-based phantoms. We modified the mathematical formulation of the calibration problem to eliminate the need of imaging the point targets at different viewing angles and developed an actuator-assisted approach/setup to facilitate quick and consistent collection of point targets spanning the entire image field of view. The actuator-assisted approach was applied to a commonly used cross wire phantom as well as two custom-made point-based phantoms (original and modified), each containing 7 collinear point targets, and compared the results with the traditional freehand cross wire phantom calibration in terms of calibration reproducibility, point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time. Results demonstrated that the actuator-assisted single cross wire phantom calibration significantly improved the calibration reproducibility and offered similar point reconstruction precision, point reconstruction accuracy, distance reconstruction accuracy, and data acquisition time with respect to the freehand cross wire phantom calibration. On the other hand, the actuator-assisted modified “collinear point target” phantom calibration offered similar precision and accuracy when compared to the freehand cross wire phantom calibration, but it reduced the data acquisition time by 57%. It appears that both actuator-assisted cross wire phantom and modified collinear point target phantom calibration approaches are viable options for freehand 3D ultrasound calibration. PMID:29854371

Standardized End Point Definitions for Coronary Intervention Trials: The Academic Research Consortium-2 Consensus Document.

PubMed

Garcia-Garcia, Hector M; McFadden, Eugène P; Farb, Andrew; Mehran, Roxana; Stone, Gregg W; Spertus, John; Onuma, Yoshinobu; Morel, Marie-Angèle; van Es, Gerrit-Anne; Zuckerman, Bram; Fearon, William F; Taggart, David; Kappetein, Arie-Pieter; Krucoff, Mitchell W; Vranckx, Pascal; Windecker, Stephan; Cutlip, Donald; Serruys, Patrick W

2018-06-12

The Academic Research Consortium (ARC)-2 initiative revisited the clinical and angiographic end point definitions in coronary device trials, proposed in 2007, to make them more suitable for use in clinical trials that include increasingly complex lesion and patient populations and incorporate novel devices such as bioresorbable vascular scaffolds. In addition, recommendations for the incorporation of patient-related outcomes in clinical trials are proposed. Academic Research Consortium-2 is a collaborative effort between academic research organizations in the United States and Europe, device manufacturers, and European, US, and Asian regulatory bodies. Several in-person meetings were held to discuss the changes that have occurred in the device landscape and in clinical trials and regulatory pathways in the last decade. The consensus-based end point definitions in this document are endorsed by the stakeholders of this document and strongly advocated for clinical trial purposes. This Academic Research Consortium-2 document provides further standardization of end point definitions for coronary device trials, incorporating advances in technology and knowledge. Their use will aid interpretation of trial outcomes and comparison among studies, thus facilitating the evaluation of the safety and effectiveness of these devices. © 2018 American Heart Association, Inc., and European Society of Cardiology.

The iPad: tablet technology to support nursing and midwifery student learning: an evaluation in practice.

PubMed

Brown, Janie; McCrorie, Pamela

2015-03-01

This research explored the impact of tablet technology, in the form of Apple iPads, on undergraduate nursing and midwifery students' learning outcomes. In simulated clinical learning environments, first-year nursing students (n = 30) accessed apps and reference materials on iPads. Third-year nursing students (n = 88) referred to clinical guidelines to aid their decision making when problem solving. First-year midwifery students (n = 25) filmed themselves undertaking a skill and then immediately played back the video file. A total of 45 students completed an online questionnaire that allowed for qualitative comments. Students reported finding the use of iPads easy and that iPads provided point-of-care access to resources, ensuring an evidence-based approach to clinical decision making. iPads reportedly improved student efficiency and time management, while improving their ability to provide patient education. Students who used iPads for the purpose of formative self-assessment appreciated the immediate feedback and opportunity to develop clinical skills.

A Survey of Complex Object Technologies for Digital Libraries

NASA Technical Reports Server (NTRS)

Nelson, Michael L.; Argue, Brad; Efron, Miles; Denn, Sheila; Pattuelli, Maria Cristina

2001-01-01

Many early web-based digital libraries (DLs) had implicit assumptions reflected in their architecture that the unit of focus in the DL (frequently "reports" or "e-prints") would only be manifested in a single, or at most a few, common file formats such as PDF or PostScript. DLs have now matured to the point where their contents are commonly no longer simple files. Complex objects in DLs have emerged from in response to various requirements, including: simple aggregation of formats and supporting files, bundling additional information to aid digital preservation, creating opaque digital objects for e-commerce applications, and the incorporation of dynamic services with the traditional data files. We examine a representative (but not necessarily exhaustive) number of current and recent historical web-based complex object technologies and projects that are applicable to DLs: Aurora, Buckets, ComMentor, Cryptolopes, Digibox, Document Management Alliance, FEDORA, Kahn-Wilensky Framework Digital Objects, Metadata Encoding & Transmission Standard, Multivalent Documents, Open eBooks, VERS Encapsulated Objects, and the Warwick Framework.

Investigation of Air Transportation Technology at Princeton University, 1989-1990

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1990-01-01

The Air Transportation Technology Program at Princeton University proceeded along six avenues during the past year: microburst hazards to aircraft; machine-intelligent, fault tolerant flight control; computer aided heuristics for piloted flight; stochastic robustness for flight control systems; neural networks for flight control; and computer aided control system design. These topics are briefly discussed, and an annotated bibliography of publications that appeared between January 1989 and June 1990 is given.

Proceedings of the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology

NASA Technical Reports Server (NTRS)

Hyde, Patricia R.; Loftin, R. Bowen

1993-01-01

The volume 2 proceedings from the 1993 Conference on Intelligent Computer-Aided Training and Virtual Environment Technology are presented. Topics discussed include intelligent computer assisted training (ICAT) systems architectures, ICAT educational and medical applications, virtual environment (VE) training and assessment, human factors engineering and VE, ICAT theory and natural language processing, ICAT military applications, VE engineering applications, ICAT knowledge acquisition processes and applications, and ICAT aerospace applications.

Beyond the Borders: A Discussion of Student Financial Aid and Educational Opportunity in Texas, New York and the Pacific Rim in Relationship to California.

ERIC Educational Resources Information Center

Eureka Project, Sacramento, CA.

Student financial aid is a major education industry. Three papers by educational professionals are presented as points of comparison. "Student Financial Aid Policies and Programs in Texas and California: A Comparison" (Stephen Janes) states that Texas and California have much in common; demographics in the two states are not radically…

The current status of audiologic rehabilitation for profound unilateral sensorineural hearing loss.

PubMed

Bishop, Charles E; Eby, Thomas L

2010-03-01

Audiologic rehabilitation of individuals with profound unilateral sensorineural hearing loss (USNHL) has traditionally been limited to the use of air-conduction contralateral routing of sound (CROS) hearing aids. Treatment for these individuals has expanded with new applications of the bone-anchored hearing aid (BAHA), transcranial hearing aid (t-CROS), and the cochlear implant. In this article, the authors review the literature that addresses these various treatment options. Contemporary review Historical information is available that describes the limited efficacy of air-conduction CROS hearing aids in lifting hearing handicap associated with USNHL. Current investigations on providing cross hearing are generally focused on use of the BAHA. Little is known at present whether new developments in hearing aid technology can improve on conventional air-conduction CROS or t-CROS approaches. Interestingly, the cochlear implant seems to be a viable option for individuals with USNHL and tinnitus who also have intact auditory nerve pathways. There is indication in the literature that BAHA provides greater relief of hearing handicap associated with USNHL than CROS hearing aids; however, both have been found to provide limited patient satisfaction and seemingly fall short of restoring true sound localization. Adequate trials have not been performed comparing BAHA with the best CROS hearing aid technology. Transcranial hearing aids and cochlear implants are experimental methods to treat USNHL and hold promise, although there remains a lack of studies available to fully support this.

Educating Brazilian workers about AIDS.

PubMed

1991-12-01

This article contains a the script for a slide-tape presentation entitled Working Against AIDS, a presentation developed by the Brazil Family Planning Association (BEMFAM) which is designed to debunk common misconceptions about the disease. This audio-visual, which targets Brazilian workers, can be used during talks, seminars, and meetings. A discussion of the issues involved usually follows the presentation of Working Against AIDS. The presentation contains 30 illustrated slides (these are included in the article). The presentation begins by explaining that much of the information concerning AIDS is prejudicial and misleading. The next few slides point out some of the common misconceptions about AIDS, such as claims denying the existence of the disease, or suggestions that only homosexuals and prostitutes are at risk. The presentation then goes on to explain the ways in which the virus can and cannot be transmitted. Then it discusses how the virus destroys the body's natural defenses and explains the ensuing symptoms. Slides 14 and 15 point out that no cure yet exists for AIDS, making prevention essential. Slides 16-23 explain what actions are considered to be high risk and which ones do not entail risk. Noting that AIDS can be prevented, slide 24 says that the disease should not present an obstacle to spontaneous manifestations of human relations. The next slide explains that condoms should always be used when having sex with someone who could be infected with AIDS. Finally slides 26-30 demonstrate the proper way to use and dispose of a condom.

A retrospective analysis of compact fluorescent lamp experience curves and their correlations to deployment programs

DOE PAGES

Smith, Sarah Josephine; Wei, Max; Sohn, Michael D.

2016-09-17

Experience curves are useful for understanding technology development and can aid in the design and analysis of market transformation programs. Here, we employ a novel approach to create experience curves, to examine both global and North American compact fluorescent lamp (CFL) data for the years 1990–2007. We move away from the prevailing method of fitting a single, constant, exponential curve to data and instead search for break points where changes in the learning rate may have occurred. Our analysis suggests a learning rate of approximately 21% for the period of 1990–1997, and 51% and 79% in global and North Americanmore » datasets, respectively, after 1998. We use price data for this analysis; therefore our learning rates encompass developments beyond typical “learning by doing”, including supply chain impacts such as market competition. We examine correlations between North American learning rates and the initiation of new programs, abrupt technological advances, and economic and political events, and find an increased learning rate associated with design advancements and federal standards programs. Our findings support the use of segmented experience curves for retrospective and prospective technology analysis, and may imply that investments in technology programs have contributed to an increase of the CFL learning rate.« less

A retrospective analysis of compact fluorescent lamp experience curves and their correlations to deployment programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Sarah Josephine; Wei, Max; Sohn, Michael D.

Experience curves are useful for understanding technology development and can aid in the design and analysis of market transformation programs. Here, we employ a novel approach to create experience curves, to examine both global and North American compact fluorescent lamp (CFL) data for the years 1990–2007. We move away from the prevailing method of fitting a single, constant, exponential curve to data and instead search for break points where changes in the learning rate may have occurred. Our analysis suggests a learning rate of approximately 21% for the period of 1990–1997, and 51% and 79% in global and North Americanmore » datasets, respectively, after 1998. We use price data for this analysis; therefore our learning rates encompass developments beyond typical “learning by doing”, including supply chain impacts such as market competition. We examine correlations between North American learning rates and the initiation of new programs, abrupt technological advances, and economic and political events, and find an increased learning rate associated with design advancements and federal standards programs. Our findings support the use of segmented experience curves for retrospective and prospective technology analysis, and may imply that investments in technology programs have contributed to an increase of the CFL learning rate.« less

Struggling to Hear? Tiny Devices Can Keep You Connected

MedlinePlus

... features. For example, some can connect to your mobile phone, TV, and other devices using Bluetooth technology. That ... Loss? Hearing Aids Hearing Loss and Hearing Aid Use (Infographic) Assistive Devices for People with Hearing, Voice, ...

Efficiency improvement of technological preparation of power equipment manufacturing

NASA Astrophysics Data System (ADS)

Milukov, I. A.; Rogalev, A. N.; Sokolov, V. P.; Shevchenko, I. V.

2017-11-01

Competitiveness of power equipment primarily depends on speeding-up the development and mastering of new equipment samples and technologies, enhancement of organisation and management of design, manufacturing and operation. Actual political, technological and economic conditions cause the acute need in changing the strategy and tactics of process planning. At that the issues of maintenance of equipment with simultaneous improvement of its efficiency and compatibility to domestically produced components are considering. In order to solve these problems, using the systems of computer-aided process planning for process design at all stages of power equipment life cycle is economically viable. Computer-aided process planning is developed for the purpose of improvement of process planning by using mathematical methods and optimisation of design and management processes on the basis of CALS technologies, which allows for simultaneous process design, process planning organisation and management based on mathematical and physical modelling of interrelated design objects and production system. An integration of computer-aided systems providing the interaction of informative and material processes at all stages of product life cycle is proposed as effective solution to the challenges in new equipment design and process planning.

IPAD: Integrated Programs for Aerospace-vehicle Design

NASA Technical Reports Server (NTRS)

1980-01-01

The conference was organized to promote wider awareness of the IPAD program and its coming impact on American industry. The program focuses on technology issues that are critical to computer aided design manufacturing. Included is a description of a representative aerospace design process and its interface with manufacturing, the design of a future IPAD integrated computer aided design system, results to date in developing IPAD products and associated technology, and industry experiences and plans to exploit these products.

Can Financial Aid Help to Address the Growing Need for STEM Education? The Effects of Need-Based Grants on the Completion of Science, Technology, Engineering, and Math Courses and Degrees

ERIC Educational Resources Information Center

Castleman, Benjamin L.; Long, Bridget Terry; Mabel, Zachary

2018-01-01

Although workers in science, technology, engineering, and math (STEM) fields earn above-average wages, the number of college graduates prepared for STEM jobs lags behind employer demand. A key question is how to recruit and retain college students in STEM majors. We offer new evidence on the role of financial aid in supporting STEM attainment.…

Computer-aided navigation in dental implantology: 7 years of clinical experience.

PubMed

Ewers, Rolf; Schicho, Kurt; Truppe, Michael; Seemann, Rudolf; Reichwein, Astrid; Figl, Michael; Wagner, Arne

2004-03-01

This long-term study gives a review over 7 years of research, development, and routine clinical application of computer-aided navigation technology in dental implantology. Benefits and disadvantages of up-to-date technologies are discussed. In the course of the current advancement, various hardware and software configurations are used. In the initial phase, universally applicable navigation software is adapted for implantology. Since 2001, a special software module for dental implantology is available. Preoperative planning is performed on the basis of prosthetic aspects and requirements. In clinical routine use, patient and drill positions are intraoperatively registered by means of optoelectronic tracking systems; during preclinical tests, electromagnetic trackers are also used. In 7 years (1995 to 2002), 55 patients with 327 dental implants were successfully positioned with computer-aided navigation technology. The mean number of implants per patient was 6 (minimum, 1; maximum, 11). No complications were observed; the preoperative planning could be exactly realized. The average expenditure of time for the preparation of a surgical intervention with navigation decreased from 2 to 3 days in the initial phase to one-half day in clinical routine use with software that is optimized for dental implantology. The use of computer-aided navigation technology can contribute to considerable quality improvement. Preoperative planning is exactly realized and intraoperative safety is increased, because damage to nerves or neighboring teeth can be avoided.

Comparisons of client and clinician views of the importance of factors in client-clinician interaction in hearing aid purchase decisions.

PubMed

Poost-Foroosh, Laya; Jennings, Mary Beth; Cheesman, Margaret F

2015-03-01

Despite clinical recognition of the adverse effects of acquired hearing loss, only a small proportion of adults who could benefit use hearing aids. Hearing aid adoption has been studied in relationship to client-related and hearing aid technology-related factors. The influence of the client-clinician interaction in the decision to purchase hearing aids has not been explored in any depth. Importance ratings of a sample of adults having a recent hearing aid recommendation (clients) and hearing healthcare professionals (clinicians) from across Canada were compared on factors in client-clinician interactions that influence hearing aid purchase decisions. A cross-sectional approach was used to obtain online and paper-based concept ratings. Participants were 43 adults (age range, 45-85 yr) who had received a first hearing aid recommendation in the 3 mo before participation. A total of 54 audiologists and 20 hearing instrument practitioners from a variety of clinical settings who prescribed or dispensed hearing aids completed the concept-rating task. The task consisted of 122 items that had been generated via concept mapping in a previous study and which resulted in the identification of eight concepts that may influence hearing aid purchase decisions. Participants rated "the importance of each of the statements in a person's decision to purchase a hearing aid" on a 5-point Likert scale, from 1 = minimally important to 5 = extremely important. For the initial data analysis, the ratings for each of the items included in each concept were averaged for each participant to provide an estimate of the overall importance rating of each concept. Multivariate analysis of variance was used to compare the mean importance ratings of the clients to the clinicians. Ratings of individual statements were also compared in order to investigate the directionality of the importance ratings within concepts. There was a significant difference in the mean ratings for clients and clinicians for the concepts understanding and meeting client needs, conveying device information by clinician, supporting choices and shared decision making, and factors in client readiness. Three concepts-understanding and meeting client needs, conveying device information by clinician, and supporting choices and shared decision making-were rated as more important by clients than by clinicians. One concept (ie, factors in client readiness) was rated as more important by clinicians than by clients. The concepts rated as most important by clients and clinicians are consistent with components of several existing models of client-centered and patient-centered care. These concepts reflect the clients' perception of the importance of their involvement in the decision-making process. A preliminary model of client-centered care within the hearing aid uptake process and implications for clinical audiology are described. American Academy of Audiology.

Research and technology, 1984 report

NASA Technical Reports Server (NTRS)

1984-01-01

Research and technology projects in the following areas are described: cryogenic engineering, hypergolic engineering, hazardous warning instrumentation, structures and mechanics, sensors and controls, computer sciences, communications, material analysis, biomedicine, meteorology, engineering management, logistics, training and maintenance aids, and technology applications.

What's your relationship with computerized manufacturing technologies -- functional, dysfunctional or non-existent?

Treesearch

Jan Wiedenbeck; Jeff Parsons; Bruce Beeken

2009-01-01

Computer-aided manufacturing (CAM), in which computer-aided design (CAD) and computer numerically controlled (CNC) machining are integrated for the production of parts, became a viable option for the woodworking industry in the 1980s.

Technological Diffusion within Educational Institutions: Applying the Technology Acceptance Model.

ERIC Educational Resources Information Center

Wolski, Stacy; Jackson, Sally

Expectancy models of behavior such as the Theory of Reasoned Action (TRA) and the Technology Acceptance Model (TAM) offer guidelines that aid efforts to facilitate use of new technology. These models remind us that both acceptance of and resistance to technology use are grounded in beliefs and norms regarding the technology. Although TAM is widely…

Latest Researches Advances of Plasma Spraying: From Splat to Coating Formation

NASA Astrophysics Data System (ADS)

Fauchais, P.; Vardelle, M.; Goutier, S.

2016-12-01

The plasma spray process with solid feedstock, mainly ceramics powders, studied since the sixties is now a mature technology. The plasma jet and particle in-flight characterizations are now well established. The use of computer-aided robot trajectory allows spraying on industrial parts with complex geometries. Works about splat formation have shown the importance of: the substrate preheating over the transition temperature to get rid of adsorbates and condensates, substrate chemistry, crystal structure and substrate temperature during the whole coating process. These studies showed that coating properties strongly depend on the splat formation and layering. The first part of this work deals with a summary of conventional plasma spraying key points. The second part presents the current knowledge in plasma spraying with liquid feedstock, technology developed for about two decades with suspensions of particles below micrometers or solutions of precursors that form particles a few micrometers sized through precipitation. Coatings are finely structured and even nanostructured with properties arousing the interest of researchers. However, the technology is by far more complex than the conventional ones. The main conclusions are that models should be developed further, plasma torches and injection setups adapted, and new measuring techniques to reliably characterize these small particles must be designed.

SOME CONNECTIONS BETWEEN ECONOMIC AND MILITARY ASSISTANCE PROGRAMS IN UNDERDEVELOPED AREAS,

DTIC Science & Technology

of U. S. objectives in undertaking aid programs in underdeveloped countries. The second is concerned with the role of nonmilitary objectives and...both economic and military aid programs . The first and second are closely related points; the third, clearly, is quite independent.

The hearing aid effect in 2013.

PubMed

Rauterkus, Erik P; Palmer, Catherine V

2014-10-01

The hearing aid effect is the term used to describe the assignment of negative attributes to individuals using hearing aids. The effect was first empirically identified in 1977 when it was reported that adults rating young children with and without hearing aids assigned negative attributes to the children depicted with hearing aids. Investigations in the 1980s and 1990s reported mixed results related to the extent of the hearing aid effect but continued to identify, on average, some negative attributes assigned to individuals wearing hearing aids. The specific aim of this research was to investigate whether the hearing aid effect has diminished in the past several decades by replicating the methods of previous studies for testing the hearing aid effect while using updated devices. Five device configurations were rated across eight attributes. RESULTS for each attribute were considered separately. A total of 24 adults judged pictures of young men wearing various ear level technologies across 8 attributes on a 7-point Likert scale. Five young men between ages 15 and 17 yr were photographed wearing each of five device configurations including (1) a standard-sized behind-the-ear (BTE) hearing aid coupled to an earmold with #13 tubing, (2) a mini-BTE hearing aid with a slim tube open-fit configuration, (3) a completely-in-the-canal hearing aid that could not be seen because of its location in the ear canal, (4) an earbud, and (5) a Bluetooth receiver. The 24 raters saw pictures of each of the 5 young men with each wearing one of the 5 devices so that devices and young men were never judged twice by the same observer. All judgments of each device, regardless of the young man modeling the device, were combined in the data analysis. The effect of device types on judgments was tested using a one-way between-participant analysis of variance. There was a significant difference on the judgment of age and trustworthiness level among the five devices. However, our post hoc analysis revealed that only two significant effects were present. People wearing a completely-in-the-canal aid (nothing visible in the ear) were rated significantly older than people wearing an earbud, and people wearing the standard-size BTE with earmold were rated significantly more trustworthy than people who wore the Bluetooth device. It was hypothesized that the hearing aid effect would be diminished in 2013 compared with data reported in the past. This proved to be the case, as no hearing aid condition was rated as more negative than any of the non-hearing aid device conditions. In fact, models wearing the standard-size BTE with earmold were rated as more trustworthy than models wearing the Bluetooth device. The standard-sized BTE with earmold condition is the configuration that can be directly compared with previous research because similar devices were used in those studies. These results indicate that the hearing aid effect has diminished, if not completely disappeared, in the 21st century. American Academy of Audiology.

Uncovering Tensions and Capitalizing on Synergies in HIV/AIDS and Antiviolence Programs

PubMed Central

Dunbar, Megan S.; Krishnan, Suneeta; Hatcher, Abigail M.; Sawires, Sharif

2011-01-01

Research frequently points to the need to empower women to effectively combat the twin epidemics of HIV/AIDS and gender-based violence. Simultaneously, there has been increased attention given to working with men in gender equality efforts. The latter approach intervenes on masculinities as part of the fight against HIV/AIDS and violence. No research has considered these 2 lines of work side by side to address several important questions: What are the points of overlap, and the tensions and contradictions between these 2 approaches? What are the limitations and unintended consequences of each? We analyzed these 2 parallel research trends and made suggestions for how to capitalize on the synergies that come from bolstering each position with the strengths of the other. PMID:21164091

The effect of hearing aid technologies on listening in an automobile.

PubMed

Wu, Yu-Hsiang; Stangl, Elizabeth; Bentler, Ruth A; Stanziola, Rachel W

2013-06-01

Communication while traveling in an automobile often is very difficult for hearing aid users. This is because the automobile/road noise level is usually high, and listeners/drivers often do not have access to visual cues. Since the talker of interest usually is not located in front of the listener/driver, conventional directional processing that places the directivity beam toward the listener's front may not be helpful and, in fact, could have a negative impact on speech recognition (when compared to omnidirectional processing). Recently, technologies have become available in commercial hearing aids that are designed to improve speech recognition and/or listening effort in noisy conditions where talkers are located behind or beside the listener. These technologies include (1) a directional microphone system that uses a backward-facing directivity pattern (Back-DIR processing), (2) a technology that transmits audio signals from the ear with the better signal-to-noise ratio (SNR) to the ear with the poorer SNR (Side-Transmission processing), and (3) a signal processing scheme that suppresses the noise at the ear with the poorer SNR (Side-Suppression processing). The purpose of the current study was to determine the effect of (1) conventional directional microphones and (2) newer signal processing schemes (Back-DIR, Side-Transmission, and Side-Suppression) on listener's speech recognition performance and preference for communication in a traveling automobile. A single-blinded, repeated-measures design was used. Twenty-five adults with bilateral symmetrical sensorineural hearing loss aged 44 through 84 yr participated in the study. The automobile/road noise and sentences of the Connected Speech Test (CST) were recorded through hearing aids in a standard van moving at a speed of 70 mph on a paved highway. The hearing aids were programmed to omnidirectional microphone, conventional adaptive directional microphone, and the three newer schemes. CST sentences were presented from the side and back of the hearing aids, which were placed on the ears of a manikin. The recorded stimuli were presented to listeners via earphones in a sound-treated booth to assess speech recognition performance and preference with each programmed condition. Compared to omnidirectional microphones, conventional adaptive directional processing had a detrimental effect on speech recognition when speech was presented from the back or side of the listener. Back-DIR and Side-Transmission processing improved speech recognition performance (relative to both omnidirectional and adaptive directional processing) when speech was from the back and side, respectively. The performance with Side-Suppression processing was better than with adaptive directional processing when speech was from the side. The participants' preferences for a given processing scheme were generally consistent with speech recognition results. The finding that performance with adaptive directional processing was poorer than with omnidirectional microphones demonstrates the importance of selecting the correct microphone technology for different listening situations. The results also suggest the feasibility of using hearing aid technologies to provide a better listening experience for hearing aid users in automobiles. American Academy of Audiology.

Personal Electronic Aid for Maintenance

DTIC Science & Technology

1989-03-01

as input to the Department of Defense Computer -Aided Acquisi- tion and Logistics Support program and to the development of the Militarized Electronic...NUMBER ORGANIZATION (If applicable) Bc. ADDRESS (City, State, and ZIP Code) 10. SOURCE OF FUNDING NUMBERS PROGRAM PROJECT TASK WORK UNIT ELEMENT NO. NO...Manpower and Training Technology Development Program . This summary report of the Personal Electronic Aid for Maintenance (PEAM) was prepared by the

Advanced decision aiding techniques applicable to space

NASA Technical Reports Server (NTRS)

Kruchten, Robert J.

1987-01-01

RADC has had an intensive program to show the feasibility of applying advanced technology to Air Force decision aiding situations. Some aspects of the program, such as Satellite Autonomy, are directly applicable to space systems. For example, RADC has shown the feasibility of decision aids that combine the advantages of laser disks and computer generated graphics; decision aids that interface object-oriented programs with expert systems; decision aids that solve path optimization problems; etc. Some of the key techniques that could be used in space applications are reviewed. Current applications are reviewed along with their advantages and disadvantages, and examples are given of possible space applications. The emphasis is to share RADC experience in decision aiding techniques.

Neuroproteomics and Environmental Chemical-induced Adverse Effects

EPA Science Inventory

Technological advances in science have aided the field of neuroproteomics with refined tools for the study of the expression, interaction, and function of proteins in the nervous system. With the aid of bioinformatics, neuroproteomics can reveal the organization of dynamic, funct...

Denver RTD's computer aided dispatch/automatic vehicle location system : the human factors consequences

DOT National Transportation Integrated Search

1999-09-01

This report documents what happened to employees' work procedures when their employer when their employer installed Computer Aided Disptach/Automatic Vehicle Locator (CAD/AVL) technology to provide real-time surveillance of vehicles and to upgrade ra...

Understanding Chemical-induced Adverse Effects with Neuroproteins

EPA Science Inventory

Technological advances in science have aided the field of neuroproteomics with refined tools for the study of the expression, interaction, and function of proteins in the nervous system. With the aid of bioinformatics, neuroproteomics can reveal the organization of dynamic, funct...

The choice of primary energy source including PV installation for providing electric energy to a public utility building - a case study

NASA Astrophysics Data System (ADS)

Radomski, Bartosz; Ćwiek, Barbara; Mróz, Tomasz M.

2017-11-01

The paper presents multicriteria decision aid analysis of the choice of PV installation providing electric energy to a public utility building. From the energy management point of view electricity obtained by solar radiation has become crucial renewable energy source. Application of PV installations may occur a profitable solution from energy, economic and ecologic point of view for both existing and newly erected buildings. Featured variants of PV installations have been assessed by multicriteria analysis based on ANP (Analytic Network Process) method. Technical, economical, energy and environmental criteria have been identified as main decision criteria. Defined set of decision criteria has an open character and can be modified in the dialog process between the decision-maker and the expert - in the present case, an expert in planning of development of energy supply systems. The proposed approach has been used to evaluate three variants of PV installation acceptable for existing educational building located in Poznań, Poland - the building of Faculty of Chemical Technology, Poznań University of Technology. Multi-criteria analysis based on ANP method and the calculation software Super Decisions has proven to be an effective tool for energy planning, leading to the indication of the recommended variant of PV installation in existing and newly erected public buildings. Achieved results show prospects and possibilities of rational renewable energy usage as complex solution to public utility buildings.

Adjustment to Technological Change: Summary and Policy Implications.

ERIC Educational Resources Information Center

Mangum, Garth L.

A supplement to the report on adjustment to technological change, the document reviews policies of recent years related to adjustment to technological change and the added implications of the Blair and Fechter studies ("Mechanisms for Aiding Worker Adjustment to Technological Change" by Larry M. Blair and "Forecasting the Impact of Technological…

75 FR 1446 - Future Systems Technology Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2010-0001] Future Systems Technology Advisory Panel... systems technology and electronic services at the agency five to ten years into the future. The Panel will recommend a road map to aid SSA in determining what future systems technologies may be developed to assist...

Evaluation of Extended-Wear Hearing Technology for Children with Hearing Loss.

PubMed

Wolfe, Jace; Schafer, Erin; Martella, Natalie; Morais, Mila; Mann, Misty

2015-01-01

Research shows that many older children and teenagers who have mild to moderately severe sensorineural hearing loss do not use their hearing instruments during all waking hours. A variety of reasons may contribute toward this problem, including concerns about cosmetics associated with hearing aid use and the inconvenience of daily maintenance associated with hearing instruments. Extended-wear hearing instruments are inserted into the wearer's ear canal by an audiologist and are essentially invisible to outside observers. The goal of this study was to evaluate the potential benefits and limitations associated with use of extended-wear hearing instruments in a group of children with hearing loss. A two-way repeated measures design was used to examine performance differences obtained with the participants' daily-wear hearing instruments versus that obtained with extended-wear hearing instruments. Sixteen children, ages 10-17 yr old, with sensorineural hearing loss ranging from mild to moderately severe. Probe microphone measures were completed to evaluate the aided output of device. Behavioral test measures included word recognition in quiet, sentence recognition in noise, aided warble-tone thresholds, and psychophysical loudness scaling. Questionnaires were also administered to evaluate subjective performance with each hearing technology. Data logging suggested that many participants were not using their daily-wear hearing instruments during all waking hours (mean use was less than 6 h/day). Real ear probe microphone measurements indicated that a closer fit to the Desired Sensation Level Version 5 prescriptive targets was achieved with the children's daily-wear instruments when compared to the extended-wear instruments. There was no statistically significant difference in monosyllabic word recognition at 50 or 60 dBA obtained with the two hearing technologies. Sentence recognition in noise obtained with use of the extended-wear devices was, however, significantly better than what was obtained with the daily-wear hearing aids. Aided warble-tone thresholds indicated significantly better audibility for low-level sounds with use of the daily-wear hearing technology, but loudness scaling results produced mixed results. Specifically, the participants generally reported greater loudness perception with use of their daily-wear hearing aids at 2000 Hz, but use of the extended-wear hearing technology provided greater loudness perception at 4000 Hz. Finally, the participants reported higher levels of subjective performance with use of the extended-wear hearing instruments. Although some measures suggested that daily-wear hearing instruments provided better audibility than the extended-wear hearing devices, word recognition in quiet was similar with use of the two technologies, and sentence recognition in noise was better with the extended-wear hearing technology. In addition, the participants in this study reported better subjective benefit associated with the use of extended-wear hearing technology. Collectively, the results of this study suggest that extended-wear hearing technology is a viable option for older children and teenagers with mild to moderately severe hearing loss. American Academy of Audiology.

Laboratory Innovation Towards Quality Program Sustainability.

PubMed

Abimiku, Alash'le; Timperi, Ralph; Blattner, William

2016-08-01

Laboratory innovation significantly affects program sustainability of HIV programs in low and middle income countries (LMICs) far beyond its immediate sphere of impact. Innovation in rapid development of diagnostic technologies, improved quality management systems, strengthened laboratory management, affordable external quality assurance and accreditation schemes, and building local capacity have reduced costs, brought quality improvement to point-of-care testing, increased access to testing services, reduced treatment and prevention costs and opened the door to the real possibility of ending the AIDS epidemic. However, for effectively implemented laboratory innovation to contribute to HIV quality program sustainability, it must be implemented within the overall context of the national strategic plan and HIV treatment programs. The high quality of HIV rapid diagnostic test was a breakthrough that made it possible for more persons to learn their HIV status, receive counseling, and if infected to receive treatment. Likewise, the use of dried blood spots made the shipment of samples easier for the assessment of different variables of HIV infection-molecular diagnosis, CD4+ cell counts, HIV antibodies, drug resistance surveillance, and even antiretroviral drug level measurements. Such advancement is critical for to reaching the UNAIDS target of 90-90-90 and for bringing the AIDS epidemic to an end, especially in LMICs.

Optical coherence tomography and computer-aided diagnosis of a murine model of chronic kidney disease

NASA Astrophysics Data System (ADS)

Wang, Bohan; Wang, Hsing-Wen; Guo, Hengchang; Anderson, Erik; Tang, Qinggong; Wu, Tongtong; Falola, Reuben; Smith, Tikina; Andrews, Peter M.; Chen, Yu

2017-12-01

Chronic kidney disease (CKD) is characterized by a progressive loss of renal function over time. Histopathological analysis of the condition of glomeruli and the proximal convolutional tubules over time can provide valuable insights into the progression of CKD. Optical coherence tomography (OCT) is a technology that can analyze the microscopic structures of a kidney in a nondestructive manner. Recently, we have shown that OCT can provide real-time imaging of kidney microstructures in vivo without administering exogenous contrast agents. A murine model of CKD induced by intravenous Adriamycin (ADR) injection is evaluated by OCT. OCT images of the rat kidneys have been captured every week up to eight weeks. Tubular diameter and hypertrophic tubule population of the kidneys at multiple time points after ADR injection have been evaluated through a fully automated computer-vision system. Results revealed that mean tubular diameter and hypertrophic tubule population increase with time in post-ADR injection period. The results suggest that OCT images of the kidney contain abundant information about kidney histopathology. Fully automated computer-aided diagnosis based on OCT has the potential for clinical evaluation of CKD conditions.

Why Information Technologies Fail.

ERIC Educational Resources Information Center

Gayeski, Diane M.

1989-01-01

Discusses successes and failures in the field of instructional technology and suggests methods to design more appropriate systems that would present fewer barriers to adoption. Topics discussed include educational television; videotext; video technology; audiovisual aids; teleconferencing; computer assisted instruction; interactive video; CD-ROM;…

Economic impact of stimulated technological activity

NASA Technical Reports Server (NTRS)

1971-01-01

The findings are reported of research into the relationships between technological progress and economic development, with emphasis on several ways in which NASA research and development has aided in the accumulation and commercial application of new or improved scientific and technological knowledge.

Assistive technology to help persons in a minimally conscious state develop responding and stimulation control: Performance assessment and social rating.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; D'Amico, Fiora; Buonocunto, Francesca; Navarro, Jorge; Lanzilotti, Crocifissa; Fiore, Piero; Megna, Marisa; Damiani, Sabino

2015-01-01

Post-coma persons in a minimally conscious state (MCS) and with extensive motor impairment and lack of speech tend to be passive and isolated. This study aimed to (a) further assess a technology-aided approach for fostering MCS participants' responding and stimulation control and (b) carry out a social validation check about the approach. Eight MCS participants were exposed to the aforementioned approach according to an ABAB design. The technology included optic, pressure or touch microswitches to monitor eyelid, hand or finger responses and a computer system that allowed those responses to produce brief periods of positive stimulation during the B (intervention) phases of the study. Eighty-four university psychology students and 42 care and health professionals were involved in the social validation check. The MCS participants showed clear increases in their response frequencies, thus producing increases in their levels of environmental stimulation input, during the B phases of the study. The students and care and health professionals involved in the social validation check rated the technology-aided approach more positively than a control condition in which stimulation was automatically presented to the participants. A technology-aided approach to foster responding and stimulation control in MCS persons may be effective and socially desirable.

Structural Genomics and Drug Discovery for Infectious Diseases

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anderson, W.F.

The application of structural genomics methods and approaches to proteins from organisms causing infectious diseases is making available the three dimensional structures of many proteins that are potential drug targets and laying the groundwork for structure aided drug discovery efforts. There are a number of structural genomics projects with a focus on pathogens that have been initiated worldwide. The Center for Structural Genomics of Infectious Diseases (CSGID) was recently established to apply state-of-the-art high throughput structural biology technologies to the characterization of proteins from the National Institute for Allergy and Infectious Diseases (NIAID) category A-C pathogens and organisms causing emerging,more » or re-emerging infectious diseases. The target selection process emphasizes potential biomedical benefits. Selected proteins include known drug targets and their homologs, essential enzymes, virulence factors and vaccine candidates. The Center also provides a structure determination service for the infectious disease scientific community. The ultimate goal is to generate a library of structures that are available to the scientific community and can serve as a starting point for further research and structure aided drug discovery for infectious diseases. To achieve this goal, the CSGID will determine protein crystal structures of 400 proteins and protein-ligand complexes using proven, rapid, highly integrated, and cost-effective methods for such determination, primarily by X-ray crystallography. High throughput crystallographic structure determination is greatly aided by frequent, convenient access to high-performance beamlines at third-generation synchrotron X-ray sources.« less

The social stigma of HIV-AIDS: society's role.

PubMed

Kontomanolis, Emmanuel N; Michalopoulos, Spyridon; Gkasdaris, Grigorios; Fasoulakis, Zacharias

2017-01-01

AIDS is a devastating and deadly disease that affects people worldwide and, like all infections, it comes without warning. Specifically, childbearing women with AIDS face constant psychological difficulties during their gestation period, even though the pregnancy itself may be normal and healthy. These women have to deal with the uncertainties and the stress that usually accompany a pregnancy, and they have to live with the reality of having a life-threatening disease; in addition to that, they also have to deal with discriminating and stigmatizing behaviors from their environment. It is well known that a balanced mental state is a major determining factor to having a normal pregnancy and constitutes the starting point for having a good quality of life. Even though the progress in both technology and medicine is rapid, infected pregnant women seem to be missing this basic requirement. Communities seem unprepared and uneducated to smoothly integrate these people in their societies, letting the ignorance marginalize and isolate these patients. For all the aforementioned reasons, it is imperative that society and medical professionals respond and provide all the necessary support and advice to HIV-positive child bearers, in an attempt to allay their fears and relieve their distress. The purpose of this paper is to summarize the difficulties patients with HIV infection have to deal with, in order to survive and merge into society, identify the main reasons for the low public awareness, discuss the current situation, and provide potential solutions to reducing the stigma among HIV patients.

'Checkmating HIV&AIDS': Using chess to break the silence in the classroom.

PubMed

Esau, Omar

2012-12-01

In this article, I give an account of my 'Checkmating HIV&AIDS' action research project, which was an attempt to break the 'culture of silence' concerning HIV&AIDS and sex and sexuality in my classroom. In this project, I focused specifically on one code of sport, namely chess, and I point out and discuss the potential of using chess as an educational tool in addressing HIV&AIDS. It was found that learners enjoy playing chess and that it can be used in the Life Orientation classroom to promote HIV&AIDS awareness. This type of alternative awareness is relevant as learners in most schools were becoming fatigued by HIV&AIDS information overload. The project portrays the role of the teacher as a researcher and critical change agent in an HIV&AIDS-challenged society.

A phone-assistive device based on Bluetooth technology for cochlear implant users.

PubMed

Qian, Haifeng; Loizou, Philipos C; Dorman, Michael F

2003-09-01

Hearing-impaired people, and particularly hearing-aid and cochlear-implant users, often have difficulty communicating over the telephone. The intelligibility of telephone speech is considerably lower than the intelligibility of face-to-face speech. This is partly because of lack of visual cues, limited telephone bandwidth, and background noise. In addition, cellphones may cause interference with the hearing aid or cochlear implant. To address these problems that hearing-impaired people experience with telephones, this paper proposes a wireless phone adapter that can be used to route the audio signal directly to the hearing aid or cochlear implant processor. This adapter is based on Bluetooth technology. The favorable features of this new wireless technology make the adapter superior to traditional assistive listening devices. A hardware prototype was built and software programs were written to implement the headset profile in the Bluetooth specification. Three cochlear implant users were tested with the proposed phone-adapter and reported good speech quality.

Computer Aided Manufacturing.

ERIC Educational Resources Information Center

Insolia, Gerard

This document contains course outlines in computer-aided manufacturing developed for a business-industry technology resource center for firms in eastern Pennsylvania by Northampton Community College. The four units of the course cover the following: (1) introduction to computer-assisted design (CAD)/computer-assisted manufacturing (CAM); (2) CAM…

An Introduction to Document Imaging in the Financial Aid Office.

ERIC Educational Resources Information Center

Levy, Douglas A.

2001-01-01

First describes the components of a document imaging system in general and then addresses this technology specifically in relation to financial aid document management: its uses and benefits, considerations in choosing a document imaging system, and additional sources for information. (EV)

77 FR 58819 - Notice of Proposed Information Collection Requests; Federal Student Aid; Student Assistance...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... DEPARTMENT OF EDUCATION Notice of Proposed Information Collection Requests; Federal Student Aid; Student Assistance General Provisions--Readmission for Servicemembers SUMMARY: The regulations establish... respondents, including through the use of information technology. Please note that written comments received...

Adaptive Peircean decision aid project summary assessments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senglaub, Michael E.

2007-01-01

This efforts objective was to identify and hybridize a suite of technologies enabling the development of predictive decision aids for use principally in combat environments but also in any complex information terrain. The technologies required included formal concept analysis for knowledge representation and information operations, Peircean reasoning to support hypothesis generation, Mill's's canons to begin defining information operators that support the first two technologies and co-evolutionary game theory to provide the environment/domain to assess predictions from the reasoning engines. The intended application domain is the IED problem because of its inherent evolutionary nature. While a fully functioning integrated algorithm wasmore » not achieved the hybridization and demonstration of the technologies was accomplished and demonstration of utility provided for a number of ancillary queries.« less

PowerPoint or chalk and talk: Perceptions of medical students versus dental students in a medical college in India

PubMed Central

Seth, Vikas; Upadhyaya, Prerna; Ahmad, Mushtaq; Moghe, Vijay

2010-01-01

Purpose To assess students’ perceptions of the impact of PowerPoint (PPT) presentations in lectures in comparison to the traditional chalk and talk method and lectures using transparencies and overhead projector (TOHP). The study analyzes the preferences for teaching aids of medical students versus dental students. Methods Second year medical and dental undergraduates were asked to fill in a nine-item questionnaire about their perceptions of the three lecture delivery methods. Following analysis of the questionnaire the students were interviewed further. The results were analyzed separately for medical and dental students to see if there was any difference in their perceptions. Results The majority of the medical students (65.33%) preferred PPT presentations, while 15.16% of students preferred the lectures using chalkboard, and 19.51% preferred TOHP for teaching (P < 0.001). Of the dental students: 41.84% preferred chalkboard, 31.21% preferred TOHP, and 25.85% students preferred PPT presentations in the lectures (P < 0.05). Some important comments of the students were also recorded on interview which could be valuable for the medical teachers. Conclusion: The medical students clearly preferred the use of PPT presentations while the dental students did not. The study does not bring out evidence based superiority of any lecture delivery method. It appears that in the hands of a trained teacher any teaching aid would be appropriate and effective. This highlights the need for formal training in teaching technologies to develop good presentation skills and thus motivate the students. PMID:23745057

Flare cue symbology and EVS for zero-zero weather landing

NASA Astrophysics Data System (ADS)

French, Guy A.; Murphy, David M.; Ercoline, William R.

2006-05-01

When flying an airplane, landing is arguably the most difficult task a pilot can do. This applies to pilots of all skill levels particularly as the level of complexity in both the aircraft and environment increase. Current navigational aids, such as an instrument landing system (ILS), do a good job of providing safe guidance for an approach to an airfield. These aids provide data to primary flight reference (PFR) displays on-board the aircraft depicting through symbology what the pilot's eyes should be seeing. Piloting an approach under visual meteorological conditions (VMC) is relatively easy compared to the various complex instrument approaches under instrument meteorological conditions (IMC) which may include flying in zero-zero weather. Perhaps the most critical point in the approach is the transition to landing where the rate of closure between the wheels and the runway is critical to a smooth, accurate landing. Very few PFR's provide this flare cue information. In this study we will evaluate examples of flare cueing symbology for use in landing an aircraft in the most difficult conditions. This research is a part of a larger demonstration effort using sensor technology to land in zero-zero weather at airfields that offer no or unreliable approach guidance. Several problems exist when landing without visual reference to the outside world. One is landing with a force greater than desired at touchdown and another is landing on a point of the runway other than desired. We compare different flare cueing systems to one another and against a baseline for completing this complex approach task.

The Impact of Institutional Grant Aid on College Choice

ERIC Educational Resources Information Center

Hurwitz, Michael Drew

2011-01-01

The influence of institutional grant aid on the enrollment behavior of college students has been the focal point of several empirical studies during the past decade. Yet, the extent to which this multibillion dollar per year grant-allocation process influences the matriculation choices of students deciding between multiple institutions remains…

Demonstration, Developmental and Research Project for Programs, Materials, Facilities and Educational Technology for Undereducated Adults. Counselor Aides; Virginia State Module. Final Report Series.

ERIC Educational Resources Information Center

Morehead State Univ., KY. Appalachian Adult Basic Education Demonstration Center.

The Counselor-Aide Program is implemented by para-professionals working cooperatively with a certified counselor, in an effort to raise the economic level of the adults in Carroll County, through an improvement in the educational level of achievement. The counselor aides feel that they have been reasonably successful in meeting the objectives as…

JPRS Report, Science & Technology, USSR: Life Sciences.

DTIC Science & Technology

1987-09-25

Ministry of Health, Moscow] iAbstract] Assessment of the specificity of Virognostika diagnosticum (produced by Organum, the Netherlands) in AIDS diagnosis...was determined in studies of school children and in patients with diseases posing different levels of risk of infection by the AIDS virus. Positive...KLINICHESKAYA KHIRURGIYA in Russian No 10 Oct 86 p 67 [Article by V, K, Minachenko, of the Inter-Oblast Brigade for Specialized Aid to Patients

NASA/Drexel program. [research effort in large-scale technical programs management for application to urban problems

NASA Technical Reports Server (NTRS)

1973-01-01

The results are reported of the NASA/Drexel research effort which was conducted in two separate phases. The initial phase stressed exploration of the problem from the point of view of three primary research areas and the building of a multidisciplinary team. The final phase consisted of a clinical demonstration program in which the research associates consulted with the County Executive of New Castle County, Delaware, to aid in solving actual problems confronting the County Government. The three primary research areas of the initial phase are identified as technology, management science, and behavioral science. Five specific projects which made up the research effort are treated separately. A final section contains the conclusions drawn from total research effort as well as from the specific projects.

Composite structural materials. [aircraft structures

NASA Technical Reports Server (NTRS)

Ansell, G. S.; Loewy, R. G.; Wiberley, S. E.

1980-01-01

The use of filamentary composite materials in the design and construction of primary aircraft structures is considered with emphasis on efforts to develop advanced technology in the areas of physical properties, structural concepts and analysis, manufacturing, and reliability and life prediction. The redesign of a main spar/rib region on the Boeing 727 elevator near its actuator attachment point is discussed. A composite fabrication and test facility is described as well as the use of minicomputers for computer aided design. Other topics covered include (1) advanced structural analysis methids for composites; (2) ultrasonic nondestructive testing of composite structures; (3) optimum combination of hardeners in the cure of epoxy; (4) fatigue in composite materials; (5) resin matrix characterization and properties; (6) postbuckling analysis of curved laminate composite panels; and (7) acoustic emission testing of composite tensile specimens.

Prosthetic rehabilitation with an implant-supported fixed prosthesis using computer-aided design and computer-aided manufacturing dental technology for a patient with a mandibulectomy: A clinical report.

PubMed

Yoon, Hyung-In; Han, Jung-Suk

2016-02-01

The fabrication of dental prostheses with computer-aided design and computer-aided manufacturing shows acceptable marginal fits and favorable treatment outcomes. This clinical report describes the management of a patient who had undergone a mandibulectomy and received an implant-supported fixed prosthesis by using additive manufacturing for the framework and subtractive manufacturing for the monolithic zirconia restorations. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Implantable Heart Aid

NASA Technical Reports Server (NTRS)

1980-01-01

Medrad utilized NASA's Apollo technology to develop a new device called the AID implantable automatic pulse generator which monitors the heart continuously, recognizes the onset of ventricular fibrillation and delivers a corrective electrical shock. AID pulse generator is, in effect, a miniaturized version of the defibrillator used by emergency squads and hospitals to restore rhythmic heartbeat after fibrillation, but has the unique advantage of being permanently available to the patient at risk. Once implanted, it needs no specially trained personnel or additional equipment. AID system consists of a microcomputer, a power source and two electrodes which sense heart activity.

Effects of Compression on Speech Acoustics, Intelligibility, and Sound Quality

PubMed Central

Souza, Pamela E.

2002-01-01

The topic of compression has been discussed quite extensively in the last 20 years (eg, Braida et al., 1982; Dillon, 1996, 2000; Dreschler, 1992; Hickson, 1994; Kuk, 2000 and 2002; Kuk and Ludvigsen, 1999; Moore, 1990; Van Tasell, 1993; Venema, 2000; Verschuure et al., 1996; Walker and Dillon, 1982). However, the latest comprehensive update by this journal was published in 1996 (Kuk, 1996). Since that time, use of compression hearing aids has increased dramatically, from half of hearing aids dispensed only 5 years ago to four out of five hearing aids dispensed today (Strom, 2002b). Most of today's digital and digitally programmable hearing aids are compression devices (Strom, 2002a). It is probable that within a few years, very few patients will be fit with linear hearing aids. Furthermore, compression has increased in complexity, with greater numbers of parameters under the clinician's control. Ideally, these changes will translate to greater flexibility and precision in fitting and selection. However, they also increase the need for information about the effects of compression amplification on speech perception and speech quality. As evidenced by the large number of sessions at professional conferences on fitting compression hearing aids, clinicians continue to have questions about compression technology and when and how it should be used. How does compression work? Who are the best candidates for this technology? How should adjustable parameters be set to provide optimal speech recognition? What effect will compression have on speech quality? These and other questions continue to drive our interest in this technology. This article reviews the effects of compression on the speech signal and the implications for speech intelligibility, quality, and design of clinical procedures. PMID:25425919

Enhancing Fracture and Wear Resistance of Dentures/Overdentures Utilizing Digital Technology: A Case Series Report.

PubMed

Afify, Ahmed; Haney, Stephan

2016-08-01

Since it was first introduced into the dental world, computer-aided design/computer-aided manufacturing (CAD/CAM) technology has improved dramatically in regards to both data acquisition and fabrication abilities. CAD/CAM is capable of providing well-fitting intra- and extraoral prostheses when sound guidelines are followed. As CAD/CAM technology encompasses both surgical and prosthetic dental applications as well as fixed and removable aspects, it could improve the average quality of dental prostheses compared with the results obtained by conventional manufacturing methods. The purpose of this article is to provide an introduction into the methods in which this technology may be used to enhance the wear and fracture resistance of dentures and overdentures. This article will also showcase two clinical reports in which CAD/CAM technology has been implemented. © 2016 by the American College of Prosthodontists.

Technologies for better decisions in the Huron-Erie corridor, extended abstract

EPA Science Inventory

Advancements in an array of observing technologies have provided powerful tools to improve environmental assessments and to aid in decision-making. The full potential of technologies for environmental assessment has not yet been realized, particularly in combining or integrating ...

Technology Transfer: A Third World Perspective.

ERIC Educational Resources Information Center

Akubue, Anthony I.

2002-01-01

Technology transfer models are based on assumptions that do not reflect Third-World realities. Obstacles to building indigenous technology capacity include multinational corporations' control of innovations, strings attached to foreign aid, and indigenous reluctance to undertake research. Four areas of development include foreign direct…

Computer-aided decision making.

Treesearch

Keith M. Reynolds; Daniel L. Schmoldt

2006-01-01

Several major classes of software technologies have been used in decisionmaking for forest management applications over the past few decades. These computer-based technologies include mathematical programming, expert systems, network models, multi-criteria decisionmaking, and integrated systems. Each technology possesses unique advantages and disadvantages, and has...

Research and technology at the Kennedy Space Center

NASA Technical Reports Server (NTRS)

1983-01-01

Cryogenic engineering, hypergolic engineering, hazardous warning, structures and mechanics, computer sciences, communications, meteorology, technology applications, safety engineering, materials analysis, biomedicine, and engineering management and training aids research are reviewed.

Virtual reality based adaptive dose assessment method for arbitrary geometries in nuclear facility decommissioning.

PubMed

Liu, Yong-Kuo; Chao, Nan; Xia, Hong; Peng, Min-Jun; Ayodeji, Abiodun

2018-05-17

This paper presents an improved and efficient virtual reality-based adaptive dose assessment method (VRBAM) applicable to the cutting and dismantling tasks in nuclear facility decommissioning. The method combines the modeling strength of virtual reality with the flexibility of adaptive technology. The initial geometry is designed with the three-dimensional computer-aided design tools, and a hybrid model composed of cuboids and a point-cloud is generated automatically according to the virtual model of the object. In order to improve the efficiency of dose calculation while retaining accuracy, the hybrid model is converted to a weighted point-cloud model, and the point kernels are generated by adaptively simplifying the weighted point-cloud model according to the detector position, an approach that is suitable for arbitrary geometries. The dose rates are calculated with the Point-Kernel method. To account for radiation scattering effects, buildup factors are calculated with the Geometric-Progression formula in the fitting function. The geometric modeling capability of VRBAM was verified by simulating basic geometries, which included a convex surface, a concave surface, a flat surface and their combination. The simulation results show that the VRBAM is more flexible and superior to other approaches in modeling complex geometries. In this paper, the computation time and dose rate results obtained from the proposed method were also compared with those obtained using the MCNP code and an earlier virtual reality-based method (VRBM) developed by the same authors. © 2018 IOP Publishing Ltd.

Innovative technology in hearing instruments: matching needs in the developing world.

PubMed

McPherson, Bradley

2011-12-01

Hearing instrument technology research is almost entirely focused on the projected needs of the consumer market in the developed world. However, two thirds of the world's population with hearing impairment live in developing countries and this proportion will increase in future, given present demographic trends. In developing regions, amplification and other hearing health needs may differ from those in industrialized nations, for cultural, health, or economic reasons. World Health Organization estimates indicate that at present only a small percentage of individuals in developing countries who are in need of amplification have access to hearing aid provision. New technologies, such as trainable hearing aids, advanced noise reduction algorithms, feedback reduction circuitry, nano coatings for hearing aid components, and innovative power options, may offer considerable potential benefits, both for individuals with hearing impairment in developing countries and for those who provide hearing health care services in these regions. This article considers the possible supporting role of innovative hearing instrument technologies in the provision of affordable hearing health care services in developing countries and highlights the need for research that considers the requirements of the majority of the world population in need of hearing instrument provision.

Extending technology-aided leisure and communication programs to persons with spinal cord injury and post-coma multiple disabilities.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Ricciuti, Riccardo A; Trignani, Roberto; Oliva, Doretta; Signorino, Mario; D'Amico, Fiora; Sasanelli, Giovanni

2015-01-01

These two studies extended technology-aided programs to promote leisure and communication opportunities to a man with cervical spinal cord injury and a post-coma man with multiple disabilities. The studies involved the use of ABAB designs, in which A and B represented baseline and intervention phases, respectively. The programs focused on enabling the participants to activate songs, videos, requests, text messages, and telephone calls. These options were presented on a computer screen and activated through a small pressure microswitch by the man with spinal cord injury and a special touch screen by the post-coma man. To help the latter participant, who had no verbal skills, with requests and telephone calls, series of words and phrases were made available that he could activate in those situations. Data showed that both participants were successful in managing the programs arranged for them. The man with spinal cord injury activated mean frequencies of above five options per 10-min session. The post-coma man activated mean frequencies of about 12 options per 20-min session. Technology-aided programs for promoting leisure and communication opportunities might be successfully tailored to persons with spinal cord injury and persons with post-coma multiple disabilities. Implications for Rehabilitation Technology-aided programs may be critical to enable persons with pervasive motor impairment to engage in leisure activities and communication events independently. Persons with spinal cord injury, post-coma extended brain damage, and forms of neurodegenerative disease, such as amyotrophic lateral sclerosis, may benefit from those programs. The programs could be adapted to the participants' characteristics, both in terms of technology and contents, so as to improve their overall impact on the participants' functioning and general mood.

75 FR 8721 - Agency Information Collection Activities: Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-25

... on AETC training sessions, consultations, and technical assistance activities. Each regional center... information technology. Proposed Project: HRSA AIDS Education and Training Centers Evaluation Activities (OMB No. 0915-0281)--Revision The AIDS Education and Training Centers (AETC) Program, under the Title XXVI...

77 FR 41919 - Hearing Aid Compatibility Technical Standard

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-17

.... SUMMARY: The Wireless Telecommunications Bureau and the Office of Engineering and Technology (Bureaus) adopt the 2011 ANSI Standard for evaluating the hearing aid compatibility of wireless phones. The Bureaus take this action to ensure that a selection of digital wireless handset models is available to...

The Power of Computer-aided Tomography to Investigate Marine Benthic Communities

EPA Science Inventory

Utilization of Computer-aided-Tomography (CT) technology is a powerful tool to investigate benthic communities in aquatic systems. In this presentation, we will attempt to summarize our 15 years of experience in developing specific CT methods and applications to marine benthic co...

Assistive Hearing Technologies among Students with Hearing Impairment: Factors that Promote Satisfaction

ERIC Educational Resources Information Center

Rekkedal, Ann Mette

2012-01-01

Hearing technology can play an essential part in the education of deaf and hard-of-hearing children in inclusive schools. Few studies have examined these children's experiences with this technology. This article explores factors pertaining to children's use of and attitudes toward hearing technologies, such as hearing aids, cochlear implants,…

Instructional Technology and Reading: Progress, Problems, and Promise.

ERIC Educational Resources Information Center

Smith, Nila Banton

As the invention of the wheel played a large role in the technological advancement of transportation, so many new teaching devices have played an important role in the technological advancement of reading instruction. Though the spread of technology was initially slow, it now offers many instructional aids (e.g., tapes, records, television,…

Experiences with New Approach to Use of Information Technologies in Education

ERIC Educational Resources Information Center

Kostolányová, Katerina

2008-01-01

Paper describes approach of Department of Information and Communication technologies (KIK) on Pedagogical Faculty of University of Ostrava in Ostrava (PedF OU) to development of information knowledge and skills of students of OU with the aid of modern methods and education technologies with support of information technologies (IT). It surveys the…

Assistive Technology: Enhancement for Daily Life.

ERIC Educational Resources Information Center

Carr, Theresa, Ed.

1994-01-01

This theme issue of a newsletter that focuses on transition of youths who are deaf-blind discusses the topic of assistive technology. An introduction introduces the issue and notes the vast array of homemade low technology and commercially available high technology assistive aids and devices that enable adults with sensory disabilities to live,…

The use of computer-aided design/manufacturing (CAD/CAM) technology to aid in the reconstruction of congenitally deficient pediatric mandibles: A case series.

PubMed

Gougoutas, Alexander J; Bastidas, Nicholas; Bartlett, Scott P; Jackson, Oksana

2015-12-01

Microvascular reconstruction of the pediatric mandible, particularly when necessitated by severe, congenital hypoplasia, presents a formidable challenge. Complex cases, however, may be simplified by computer-aided design/computer-aided manufacturing (CAD/CAM) assisted surgical planning. This series represents the senior authors' preliminary experiences with CAD/CAM assisted, microvascular reconstruction of the pediatric mandible. Presented are two patients with hemifacial/bifacial microsomia, both with profound mandibular hypoplasia, who underwent CAD/CAM assisted reconstruction of their mandibles with vascularized fibula flaps. Surgical techniques, CAD/CAM routines employed, complications, and long-term outcomes are reported. Successful mandibular reconstructions were achieved in both patients with centralization of their native mandibles and augmentation of deficient mandibular subunits. No long-term complications were observed. CAD/CAM technology can be utilized in pediatric mandibular reconstruction, and is particularly beneficial in cases of profound, congenital hypoplasia requiring extensive, multi-planar, bony reconstructions. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

[Computer aided design for fixed partial denture framework based on reverse engineering technology].

PubMed

Sun, Yu-chun; Lü, Pei-jun; Wang, Yong

2006-03-01

To explore a computer aided design (CAD) route for the framework of domestic fixed partial denture (FPD) and confirm the suitable method of 3-D CAD. The working area of a dentition model was scanned with a 3-D mechanical scanner. Using the reverse engineering (RE) software, margin and border curves were extracted and several reference curves were created to ensure the dimension and location of pontic framework that was taken from the standard database. The shoulder parts of the retainers were created after axial surfaces constructed. The connecting areas, axial line and curving surface of the framework connector were finally created. The framework of a three-unit FPD was designed with RE technology, which showed smooth surfaces and continuous contours. The design route is practical. The result of this study is significant in theory and practice, which will provide a reference for establishing the computer aided design/computer aided manufacture (CAD/CAM) system of domestic FPD.

Adaptive Intervention Design in Mobile Health: Intervention Design and Development in the Cell Phone Intervention for You (CITY) Trial

PubMed Central

Lin, Pao-Hwa; Intille, Stephen; Bennett, Gary; Bosworth, Hayden B; Corsino, Leonor; Voils, Corrine; Grambow, Steven; Lazenka, Tony; Batch, Bryan C; Tyson, Crystal; Svetkey, Laura P

2015-01-01

Background/Aims The obesity epidemic has spread to young adults, and obesity is a significant risk factor for cardiovascular disease. The prominence and increasing functionality of mobile phones may provide an opportunity to deliver longitudinal and scalable weight management interventions in young adults. The aim of this manuscript is to describe the design and development of the intervention tested in the Cell Phone Intervention for You (CITY) study and to highlight the importance of adaptive intervention design (AID) that made it possible. The CITY study was an NHLBI-sponsored, controlled 24-month randomized clinical trial (RCT) comparing two active interventions to a usual-care control group. Participants were 365 overweight or obese (BMI ≥ 25 kg/m2) young adults. Methods Both active interventions were designed based on social cognitive theory and incorporated techniques for behavioral self-management and motivational enhancement. Initial intervention development occurred during a 1-year formative phase utilizing focus groups and iterative, participatory design. During the intervention testing, AID, where an intervention is updated or extended throughout a trial while assuring the delivery of exactly the same intervention to each cohort, was employed. The AID strategy distributed technical work and allowed introduction of novel components in phases intended to help promote and sustain participant engagement. AID was made possible by exploiting the mobile phone's remote data capabilities so that adoption of particular application components could be continuously monitored and components subsequently added or updated remotely. Results The cellphone intervention was delivered almost entirely via cell phone and was always-present, proactive, and interactive – providing passive and active reminders, frequent opportunities for knowledge dissemination, and multiple tools for self-tracking and receiving tailored feedback. The intervention changed over two years to promote and sustain engagement. The personal coaching intervention, alternatively, was primarily personal coaching with trained coaches based on a proven intervention, enhanced with a mobile application, but where all interaction with the technology was participant-initiated. Conclusions The complexity and length of the technology-based RCT created challenges in engagement and technology adaptation, which were generally discovered using novel remote monitoring technology and addressed using the AID. Investigators should plan to develop tools and procedures that explicitly support continuous remote monitoring of interventions to support AID in long-term, technology-based studies, as well as developing the interventions themselves. PMID:26229119

Performance enhancement in uniaxially tensile stressed GeSn n-channel fin tunneling field-effect transistor: Impact of stress direction

NASA Astrophysics Data System (ADS)

Wang, Hongjuan; Han, Genquan; Jiang, Xiangwei; Liu, Yan; Zhang, Chunfu; Zhang, Jincheng; Hao, Yue

2017-04-01

In this work, the boosting effect on the performance of GeSn n-channel fin tunneling FET (nFinTFET) enabled by uniaxial tensile stress is investigated theoretically. As the fin rotates within the (001) plane, the uniaxial tensile stress is always along its direction. The electrical characteristics of tensile-stressed GeSn nFinTFETs with point and line tunneling modes are computed utilizing the technology computer aided design (TCAD) simulator in which the dynamic nonlocal band-to-band tunneling (BTBT) algorithm is employed. In comparison with the relaxed devices, tensile-stressed GeSn nFinTFETs achieve a substantial enhancement in band-to-band tunneling generation rate (G BTBT) and on-state current I ON owing to the reduced bandgap E G induced by the tensile stress. Performance improvement of GeSn nFinTFETs induced by tensile stress demonstrates a strong dependence on channel direction and tunneling modes. Under the same magnitude of stress, line-nFinTFETs obtain a more pronounced I ON enhancement over the transistors with point tunneling mode.

Damage detection techniques for concrete applications.

DOT National Transportation Integrated Search

2016-08-01

New technological advances in nondestructive testing technology have created the opportunity to better utilize ultrasonic waves to aid in damage detection applications for concrete. This research utilizes an ultrasonic array device for nondestructive...

Tightly-Coupled Image-Aided Inertial Navigation Using the Unscented Kalman Filter

DTIC Science & Technology

2007-01-01

Integrated GPS/MEMS Inertial Navigation Package. In Proceedings of ION GNSS 2004, pp. 825–832, September 2004. [2] R. G. Brown and P. Y. Hwang ...Tightly-Coupled Image-Aided Inertial Navigation Using the Unscented Kalman Filter S. Ebcin, Air Force Institute of Technology M. Veth, Air Force...inertial sen- sors using an extended Kalman filter (EKF) algo- rithm. In this approach, the image feature corre- spondence search was aided using the

Job Performance Aids: Research and Technology State-of-the-Art

DTIC Science & Technology

1978-07-01

show how people develop hierarchical plans and strategies in organizing and executing their activities, and can best be applied to the integration of...NFROC FF1 78-25 JULY 1978 JOB PERFORMANCE AIDS: RESEARCH AND TECHNOLOGY STATE-OF-THE-ART A~rRVE~FO~PUBLIC RE LE ASEJ N4T~~ t;N U t. 141 fE BEST ...claims were made for the device, it is not known to be in use and no experimental results have been reported in the literature. Perhaps the best use of

Evaluation of direct and indirect additive manufacture of maxillofacial prostheses.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter; Ji, Lu

2012-09-01

The efficacy of computer-aided technologies in the design and manufacture of maxillofacial prostheses has not been fully proven. This paper presents research into the evaluation of direct and indirect additive manufacture of a maxillofacial prosthesis against conventional laboratory-based techniques. An implant/magnet-retained nasal prosthesis case from a UK maxillofacial unit was selected as a case study. A benchmark prosthesis was fabricated using conventional laboratory-based techniques for comparison against additive manufactured prostheses. For the computer-aided workflow, photogrammetry, computer-aided design and additive manufacture (AM) methods were evaluated in direct prosthesis body fabrication and indirect production using an additively manufactured mould. Qualitative analysis of position, shape, colour and edge quality was undertaken. Mechanical testing to ISO standards was also used to compare the silicone rubber used in the conventional prosthesis with the AM material. Critical evaluation has shown that utilising a computer-aided work-flow can produce a prosthesis body that is comparable to that produced using existing best practice. Technical limitations currently prevent the direct fabrication method demonstrated in this paper from being clinically viable. This research helps prosthesis providers understand the application of a computer-aided approach and guides technology developers and researchers to address the limitations identified.

Web-Based Learning in the Computer-Aided Design Curriculum.

ERIC Educational Resources Information Center

Sung, Wen-Tsai; Ou, S. C.

2002-01-01

Applies principles of constructivism and virtual reality (VR) to computer-aided design (CAD) curriculum, particularly engineering, by integrating network, VR and CAD technologies into a Web-based learning environment that expands traditional two-dimensional computer graphics into a three-dimensional real-time simulation that enhances user…

The effect of hearing aid technologies on listening in an automobile

PubMed Central

Wu, Yu-Hsiang; Stangl, Elizabeth; Bentler, Ruth A.; Stanziola, Rachel W.

2014-01-01

Background Communication while traveling in an automobile often is very difficult for hearing aid users. This is because the automobile /road noise level is usually high, and listeners/drivers often do not have access to visual cues. Since the talker of interest usually is not located in front of the driver/listener, conventional directional processing that places the directivity beam toward the listener’s front may not be helpful, and in fact, could have a negative impact on speech recognition (when compared to omnidirectional processing). Recently, technologies have become available in commercial hearing aids that are designed to improve speech recognition and/or listening effort in noisy conditions where talkers are located behind or beside the listener. These technologies include (1) a directional microphone system that uses a backward-facing directivity pattern (Back-DIR processing), (2) a technology that transmits audio signals from the ear with the better signal-to-noise ratio (SNR) to the ear with the poorer SNR (Side-Transmission processing), and (3) a signal processing scheme that suppresses the noise at the ear with the poorer SNR (Side-Suppression processing). Purpose The purpose of the current study was to determine the effect of (1) conventional directional microphones and (2) newer signal processing schemes (Back-DIR, Side-Transmission, and Side-Suppression) on listener’s speech recognition performance and preference for communication in a traveling automobile. Research design A single-blinded, repeated-measures design was used. Study Sample Twenty-five adults with bilateral symmetrical sensorineural hearing loss aged 44 through 84 years participated in the study. Data Collection and Analysis The automobile/road noise and sentences of the Connected Speech Test (CST) were recorded through hearing aids in a standard van moving at a speed of 70 miles/hour on a paved highway. The hearing aids were programmed to omnidirectional microphone, conventional adaptive directional microphone, and the three newer schemes. CST sentences were presented from the side and back of the hearing aids, which were placed on the ears of a manikin. The recorded stimuli were presented to listeners via earphones in a sound treated booth to assess speech recognition performance and preference with each programmed condition. Results Compared to omnidirectional microphones, conventional adaptive directional processing had a detrimental effect on speech recognition when speech was presented from the back or side of the listener. Back-DIR and Side-Transmission processing improved speech recognition performance (relative to both omnidirectional and adaptive directional processing) when speech was from the back and side, respectively. The performance with Side-Suppression processing was better than with adaptive directional processing when speech was from the side. The participants’ preferences for a given processing scheme were generally consistent with speech recognition results. Conclusions The finding that performance with adaptive directional processing was poorer than with omnidirectional microphones demonstrates the importance of selecting the correct microphone technology for different listening situations. The results also suggest the feasibility of using hearing aid technologies to provide a better listening experience for hearing aid users in automobiles. PMID:23886425

The mothers of prevention.

PubMed

1994-01-01

In New Caledonia, a 30-year-old teacher who is a mother of 12, Mme. Losa Otolose Terrat, composed a song in Wallisian about AIDS. A student nurse and several young Wallisian musicians called Sai recorded her song which was broadcast in April 1994. AIDS prevention messages have often neglected the Wallisian and Futunan community in New Caledonia. It is difficult for this community to discuss sex and sexuality, thereby causing resistance to AIDS prevention messages. Losa Otolose Terrat tried to use respectful words to reach all community members. Young people can talk about AIDS more frankly than their parents and older people, however. People who do not talk about AIDS often pick up copies of the Understanding AIDS booklet to read at home. The 1994 World AIDS Day theme is The Family and AIDS, an appropriate theme for the Wallisian and Futunan community, since the family is its focus. The church and other leaders should support AIDS prevention efforts to awaken the community's understanding of the need to prevent AIDS now to secure the future of the children. AIDS education is needed for older people. Younger people need to take action. Since mothers are the focal point of education, they are also needed to spread the message about AIDS.

22 CFR 202.2 - Shipments eligible for reimbursement of freight charges.

Code of Federal Regulations, 2011 CFR

2011-04-01

... time can be effected by the utilization of points of entry other than ports. (b) Shipments shall be... development, relief, and rehabilitation in nations or areas designated by the Administrator of AID from time to time, agencies may be reimbursed by AID within specified limitations for freight charges incurred...

Do Merit-Aid Programs Help States Build Skilled Workforces?

ERIC Educational Resources Information Center

Groen, Jeffrey A.

2011-01-01

One of the major developments in financing undergraduate education in the United States in the past 20 years has been the introduction of broad-based merit-aid programs by state governments. The typical program waives tuition and fees at public colleges and universities for state residents who have attained a respectable grade-point average…

78 FR 22414 - Amendment of Class E Airspace; Reno, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-16

... Marker (LMM) and the Middle Marker (MM) has made this action necessary for the safety and management of... is necessary due to the decommissioning of the LMM and MM navigation aids. The Airport Reference Point is used to describe the airspace instead of the LMM and the MM navigational aids. There is no...

Violence Prevention. A Center Quick Training Aid.

ERIC Educational Resources Information Center

California Univ., Los Angeles. Center for Mental Health in Schools.

Safe schools, violence prevention, and conflict resolution are all major concerns in addressing barriers to learning. This quick training aid presents a brief set of resources to guide those providing an in-service training session on violence prevention in schools. The packet contains a brief introduction to the topic with key talking points,…

Making Babies: The State of the Art.

ERIC Educational Resources Information Center

Blank, Robert H.

1985-01-01

Advances in technology are not only changing human reproduction but raising perplexing questions of law and ethics. The reproduction-aiding technologies are discussed and possible scenarios for the future are described. (Author/RM)

Current and emerging technologies in melanoma diagnosis: the state of the art

PubMed Central

Psaty, Estee L.; Halpern, Allan C.

2017-01-01

Relative to other specialties, dermatologists have been slow to adopt advanced technologic diagnostic aids. After all, most skin disease can be diagnosed by simple visual inspection, and the skin is readily accessible for a diagnostic biopsy. Diagnostic aids such as total body photography and dermoscopy improve the clinician's ability to diagnose melanoma beyond unaided visual inspection, however, and are now considered mainstream methods for early detection. Emerging technologies such as in vivo reflectance confocal microscopy are currently being investigated to determine their utility for noninvasive diagnosis of melanoma. This review summarizes the currently available cutaneous imaging devices and new frontiers in noninvasive diagnosis of skin disease. We anticipate that multimodal systems that combine different imaging technologies will further improve our ability to detect, at the bedside, melanoma at an earlier stage. PMID:19095152

The International Space Station Evolution Data Book: An Overview and Status

NASA Technical Reports Server (NTRS)

Antol, Jeffrey; Jorgensen, Catherine A.

1999-01-01

The evolution and enhancement of the International Space Station (ISS) is currently being planned in conjunction with the on-orbit construction of the baseline configuration. Three principal areas have been identified that will contribute to the evolution of ISS: Pre-Planned Program Improvement (P3I), Utilization & Commercialization, and Human Exploration and Development of Space (HEDS) missions. The ISS Evolution Strategy, under development by the Spacecraft and Sensors Branch of NASA Langley Research Center, seeks to coordinate the P3I technology development with Commercialization/Utilization activities and HEDS advanced mission accommodation to provide synergistic technology developments for all three areas. The focal point of this proposed strategy is the ISS Evolution Data Book (EDB), a tool for aiding the evolution and enhancement of ISS beyond Assembly Complete. This paper will discuss the strategy and provide an overview of the EDB, describing the contents of each section. It will also discuss potential applications of the EDB and present an example Design Reference Mission (DRM). The latest status of the EDB and the plans for completing and enhancing the book will also be summarized.

A Brief Chronicle of CD4 as a Biomarker for HIV/AIDS: A Tribute to the Memory of John L. Fahey.

PubMed

Kagan, Jonathan M; Sanchez, Ana M; Landay, Alan; Denny, Thomas N

Foundational cellular immunology research of the 1960s and 1970s, together with the advent of monoclonal antibodies and flow cytometry, provided the knowledge base and the technological capability that enabled the elucidation of the role of CD4 T cells in HIV infection. Research identifying the sources and magnitude of variation in CD4 measurements, standardized reagents and protocols, and the development of clinical flow cytometers all contributed to the feasibility of widespread CD4 testing. Cohort studies and clinical trials provided the context for establishing the utility of CD4 for prognosis in HIV-infected persons, initial assessment of in vivo antiretroviral drug activity, and as a surrogate marker for clinical outcome in antiretroviral therapeutic trials. Even with sensitive HIV viral load measurement, CD4 cell counting is still utilized in determining antiretroviral therapy eligibility and time to initiate therapy. New point of care technologies are helping both to lower the cost of CD4 testing and enable its use in HIV test and treat programs around the world.

Earth-to-Orbit Laser Launch Simulation for a Lightcraft Technology Demonstrator

NASA Astrophysics Data System (ADS)

Richard, J. C.; Morales, C.; Smith, W. L.; Myrabo, L. N.

2006-05-01

Optimized laser launch trajectories have been developed for a 1.4 m diameter, 120 kg (empty mass) Lightcraft Technology Demonstrator (LTD). The lightcraft's combined-cycle airbreathing/rocket engine is designed for single-stage-to-orbit flights with a mass ratio of 2 propelled by a 100 MW class ground-based laser built on a 3 km mountain peak. Once in orbit, the vehicle becomes an autonomous micro-satellite. Two types of trajectories were simulated with the SORT (Simulation and Optimization of Rocket Trajectories) software package: a) direct GBL boost to orbit, and b) GBL boost aided by laser relay satellite. Several new subroutines were constructed for SORT to input engine performance (as a function of Mach number and altitude), vehicle aerodynamics, guidance algorithms, and mass history. A new guidance/steering option required the lightcraft to always point at the GBL or laser relay satellite. SORT iterates on trajectory parameters to optimize vehicle performance, achieve a desired criteria, or constrain the solution to avoid some specific limit. The predicted laser-boost performance for the LTD is undoubtedly revolutionary, and SORT simulations have helped to define this new frontier.

Journey to Medieval China: Using Technology-Enhanced Instruction to Develop Content Knowledge and Digital Literacy Skills

ERIC Educational Resources Information Center

Shand, Kristen; Winstead, Lisa; Kottler, Ellen

2012-01-01

Recent innovations in Web-based technology tools have made planning instruction with technology in mind far more doable than in years past. To aid teachers in planning with technology, tools are organized into five broad categories: communication, collaboration, presentation, organization and critical-thinking. The purpose and potential of each…

An Analysis of the Federal Role in Instructional Technology in the Era of the New Federalism.

ERIC Educational Resources Information Center

Scandura, Joseph M.

This analysis of how the federal government might best promote excellence in education via instructional technology identifies strengths and weaknesses of instructional technology during the 1980's, indicates how technology might aid the teaching and learning process, and suggests how the federal goverment might best assist states and localities…

Biomedical engineering at Sandia National Laboratories

NASA Astrophysics Data System (ADS)

Zanner, Mary Ann

1994-12-01

The potential exists to reduce or control some aspects of the U.S. health care expenditure without compromising health care delivery by developing carefully selected technologies which impact favorably on the health care system. A focused effort to develop such technologies is underway at Sandia National Laboratories. As a DOE National Laboratory, Sandia possesses a wealth of engineering and scientific expertise that can be readily applied to this critical national need. Appropriate mechanisms currently exist to allow transfer of technology from the laboratory to the private sector. Sandia's Biomedical Engineering Initiative addresses the development of properly evaluated, cost-effective medical technologies through team collaborations with the medical community. Technology development is subjected to certain criteria including wide applicability, earlier diagnoses, increased efficiency, cost-effectiveness and dual-use. Examples of Sandia's medical technologies include a noninvasive blood glucose sensor, computer aided mammographic screening, noninvasive fetal oximetry and blood gas measurement, burn diagnostics and laser debridement, telerobotics and ultrasonic scanning for prosthetic devices. Sandia National Laboratories has the potential to aid in directing medical technology development efforts which emphasize health care needs, earlier diagnosis, cost containment and improvement of the quality of life.

[Clinical skills and outcomes of chair-side computer aided design and computer aided manufacture system].

PubMed

Yu, Q

2018-04-09

Computer aided design and computer aided manufacture (CAD/CAM) technology is a kind of oral digital system which is applied to clinical diagnosis and treatment. It overturns the traditional pattern, and provides a solution to restore defect tooth quickly and efficiently. In this paper we mainly discuss the clinical skills of chair-side CAD/CAM system, including tooth preparation, digital impression, the three-dimensional design of prosthesis, numerical control machining, clinical bonding and so on, and review the outcomes of several common kinds of materials at the same time.

Recent Advances in HNC’s Context Vector Information Retrieval Technology

DTIC Science & Technology

1996-05-01

infectados 14 20 0.360 portadoras 5 5 0.358 deficiencia 8 10 0.351 vih 10 18 0.343 adquirida 26 28 0.340 infection 12 22 0.337 aids "patients 12...0.607 portadores 16 31 0.528 immunodeficiency 6 6 0.514 infectadas 18 21 0.504 hiv 18 49 0.496 vih 10 18 0.489 aids 86 578 0.481 infectados 14...34 Table 2 shows the stem tree for the tie-word "AIDS". In Spanish, AIDS has the acronym " SIDA " which stands for sindrome inmuno deficiencia

Textile Visual Materials: Appropriate Technology in Action.

ERIC Educational Resources Information Center

Donoghue, Beverly Emerson

An innovative educational medium--screenprinted visual aids on cloth--is one alternative to conventional media in Africa, where visual materials are important communication tools but conventional media and materials are often scarce. A production process for cloth visual aids was developed and evaluated in Ghana and Sudan through the…

Computer Skill Acquisition and Retention: The Effects of Computer-Aided Self-Explanation

ERIC Educational Resources Information Center

Chi, Tai-Yin

2016-01-01

This research presents an experimental study to determine to what extent computer skill learners can benefit from generating self-explanation with the aid of different computer-based visualization technologies. Self-explanation was stimulated with dynamic visualization (Screencast), static visualization (Screenshot), or verbal instructions only,…

Aids for Health and Home Extension Volunteers. Appropriate Technologies for Development. Reprint R-3.

ERIC Educational Resources Information Center

Peace Corps, Washington, DC. Information Collection and Exchange Div.

This book contains various aids for Peace Corps home extension volunteers. Section I, "Culture Resource Material," contains four articles by Paul Benjamin: (1) "Values in American Culture"; (2) "The Cultural Context of Health Education"; (3) "Problems of Introducing Public Health Programs in 'Underdeveloped…

Computer Numerical Control: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Sinn, John W.

This instructional manual contains five learning activity packets for use in a workshop on computer numerical control for computer-aided manufacturing. The lessons cover the following topics: introduction to computer-aided manufacturing, understanding the lathe, using the computer, computer numerically controlled part programming, and executing a…

APPLICATION OF 3D COMPUTER-AIDED TOMOGRAPHY TO THE QUANTIFICATION OF MARINE SEDIMENT COMMUNITIES IN POLLUTION GRADIENTS

EPA Science Inventory

Computer-Aided Tomography (CT) has been demonstrated to be a cost efficient tool for the qualitative and quantitative study of estuarine benthic communities along pollution gradients.
Now we have advanced this technology to successfully visualize and discriminate three dimen...

Conditions for the Application of Science and Technology for Human Welfare

ERIC Educational Resources Information Center

Sabin, Albert B.

1972-01-01

Maintains that the overpopulation without adequate resources in Asia, Latin America and other parts of the world can be catastrophic to all the countries in the world. Efforts to provide aid to developing nations have been inadequate. International cooperation for aid is very much needed now. (PS)

Utilizing semantic Wiki technology for intelligence analysis at the tactical edge

NASA Astrophysics Data System (ADS)

Little, Eric

2014-05-01

Challenges exist for intelligence analysts to efficiently and accurately process large amounts of data collected from a myriad of available data sources. These challenges are even more evident for analysts who must operate within small military units at the tactical edge. In such environments, decisions must be made quickly without guaranteed access to the kinds of large-scale data sources available to analysts working at intelligence agencies. Improved technologies must be provided to analysts at the tactical edge to make informed, reliable decisions, since this is often a critical collection point for important intelligence data. To aid tactical edge users, new types of intelligent, automated technology interfaces are required to allow them to rapidly explore information associated with the intersection of hard and soft data fusion, such as multi-INT signals, semantic models, social network data, and natural language processing of text. Abilities to fuse these types of data is paramount to providing decision superiority. For these types of applications, we have developed BLADE. BLADE allows users to dynamically add, delete and link data via a semantic wiki, allowing for improved interaction between different users. Analysts can see information updates in near-real-time due to a common underlying set of semantic models operating within a triple store that allows for updates on related data points from independent users tracking different items (persons, events, locations, organizations, etc.). The wiki can capture pictures, videos and related information. New information added directly to pages is automatically updated in the triple store and its provenance and pedigree is tracked over time, making that data more trustworthy and easily integrated with other users' pages.

Evaluation: A Qualitative Pilot Study of Novel Information Technology Infrastructure to Communicate Genetic Variant Updates.

PubMed

Klinkenberg-Ramirez, Stephanie; Neri, Pamela M; Volk, Lynn A; Samaha, Sara J; Newmark, Lisa P; Pollard, Stephanie; Varugheese, Matthew; Baxter, Samantha; Aronson, Samuel J; Rehm, Heidi L; Bates, David W

2016-01-01

Partners HealthCare Personalized Medicine developed GeneInsight Clinic (GIC), a tool designed to communicate updated variant information from laboratory geneticists to treating clinicians through automated alerts, categorized by level of variant interpretation change. The study aimed to evaluate feedback from the initial users of the GIC, including the advantages and challenges to receiving this variant information and using this technology at the point of care. Healthcare professionals from two clinics that ordered genetic testing for cardiomyopathy and related disorders were invited to participate in one-hour semi-structured interviews and/ or a one-hour focus group. Using a Grounded Theory approach, transcript concepts were coded and organized into themes. Two genetic counselors and two physicians from two treatment clinics participated in individual interviews. Focus group participants included one genetic counselor and four physicians. Analysis resulted in 8 major themes related to structuring and communicating variant knowledge, GIC's impact on the clinic, and suggestions for improvements. The interview analysis identified longitudinal patient care, family data, and growth in genetic testing content as potential challenges to optimization of the GIC infrastructure. Participants agreed that GIC implementation increased efficiency and effectiveness of the clinic through increased access to genetic variant information at the point of care. Development of information technology (IT) infrastructure to aid in the organization and management of genetic variant knowledge will be critical as the genetic field moves towards whole exome and whole genome sequencing. Findings from this study could be applied to future development of IT support for genetic variant knowledge management that would serve to improve clinicians' ability to manage and care for patients.

The Evolving Landscape of HIV Drug Resistance Diagnostics for Expanding Testing in Resource-Limited Settings.

PubMed

Inzaule, Seth C; Hamers, Ralph L; Paredes, Roger; Yang, Chunfu; Schuurman, Rob; Rinke de Wit, Tobias F

2017-01-01

Global scale-up of antiretroviral treatment has dramatically changed the prospects of HIV/AIDS disease, rendering life-long chronic care and treatment a reality for millions of HIV-infected patients. Affordable technologies to monitor antiretroviral treatment are needed to ensure long-term durability of limited available drug regimens. HIV drug resistance tests can complement existing strategies in optimizing clinical decision-making for patients with treatment failure, in addition to facilitating population-based surveillance of HIV drug resistance. This review assesses the current landscape of HIV drug resistance technologies and discusses the strengths and limitations of existing assays available for expanding testing in resource-limited settings. These include sequencing-based assays (Sanger sequencing assays and nextgeneration sequencing), point mutation assays, and genotype-free data-based prediction systems. Sanger assays are currently considered the gold standard genotyping technology, though only available at a limited number of resource-limited setting reference and regional laboratories, but high capital and test costs have limited their wide expansion. Point mutation assays present opportunities for simplified laboratory assays, but HIV genetic variability, extensive codon redundancy at or near the mutation target sites with limited multiplexing capability have restricted their utility. Next-generation sequencing, despite high costs, may have potential to reduce the testing cost significantly through multiplexing in high-throughput facilities, although the level of bioinformatics expertise required for data analysis is currently still complex and expensive and lacks standardization. Web-based genotype-free prediction systems may provide enhanced antiretroviral treatment decision-making without the need for laboratory testing, but require further clinical field evaluation and implementation scientific research in resource-limited settings.

Conflicts between conservative Christian institutions and secular groups in sub-Saharan Africa: Ideological discourses on sexualities, reproduction, and HIV/AIDS

PubMed Central

Mantell, Joanne E.; Correale, Jacqueline; Adams-Skinner, Jessica; Stein, Zena A.

2011-01-01

Religious and secular institutions advocate strategies that represent all points on the continuum to reduce the spread of HIV/AIDS. Drawing on an extensive literature review of studies conducted in sub-Saharan Africa, we focus on those secular institutions that support all effective methods of reducing HIV/AIDS transmission and those conservative religious institutions that support a limited set of prevention methods. We conclude by identifying topics for dialogue between these viewpoints that should facilitate cooperation by expanding the generally acceptable HIV/AIDS prevention methods, and especially the use of condoms. PMID:21834733

A methodology for the comparative evaluation of alternative bioseparation technologies.

PubMed

Tran, Richard; Zhou, Yuhong; Lacki, Karol M; Titchener-Hooker, Nigel J

2008-01-01

Advances in upstream technologies and growing commercial demand have led to cell culture processes of ever larger volumes and expressing at higher product titers. This has increased the burden on downstream processing. Concerns regarding the capacity limitations of packed-bed chromatography have led process engineers to begin investigating new bioseparation techniques that may be considered as "alternatives" to chromatography, and which could potentially offer higher processing capacities but at a lower cost. With the wide range of alternatives, which are currently available, each with their own strengths and inherent limitations, coupled with the time pressures associated with process development, the challenge for process engineers is to determine which technologies are most worth investigating. This article presents a methodology based on a multiattribute decision making (MADM) analysis approach, utilizing both quantitative and qualitative data, which can be used to determine the "industrial attractiveness" of bioseparation technologies, accounting for trade-offs between their strengths and weaknesses. By including packed-bed chromatography in the analysis as a reference point, it was possible to determine the alternatives, which show the most promise for use in large-scale manufacturing processes. The results of this analysis show that although the majority of alternative techniques offer certain advantages over conventional packed-bed chromatography, their attractiveness overall means that currently none of these technologies may be considered as viable alternatives to chromatography. The methodology introduced in this study may be used to gain significant quantitative insight as to the key areas in which improvements are required for each technique, and thus may be used as a tool to aid in further technological development.

A conceptual cognitive architecture for robots to learn behaviors from demonstrations in robotic aid area.

PubMed

Tan, Huan; Liang, Chen

2011-01-01

This paper proposes a conceptual hybrid cognitive architecture for cognitive robots to learn behaviors from demonstrations in robotic aid situations. Unlike the current cognitive architectures, this architecture puts concentration on the requirements of the safety, the interaction, and the non-centralized processing in robotic aid situations. Imitation learning technologies for cognitive robots have been integrated into this architecture for rapidly transferring the knowledge and skills between human teachers and robots.

Computer-aided design and computer science technology

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Voigt, S. J.

1976-01-01

A description is presented of computer-aided design requirements and the resulting computer science advances needed to support aerospace design. The aerospace design environment is examined, taking into account problems of data handling and aspects of computer hardware and software. The interactive terminal is normally the primary interface between the computer system and the engineering designer. Attention is given to user aids, interactive design, interactive computations, the characteristics of design information, data management requirements, hardware advancements, and computer science developments.

Fear of AIDS and attrition among medical technologists.

PubMed Central

Gauch, R R; Feeney, K B; Brown, J W

1990-01-01

Attitudes toward AIDS were measured by a survey of 212 attendees at the annual meeting of the New Jersey Society for Medical Technology. Twenty five percent of the respondents were considering leaving the profession because of a fear of AIDS. In addition, almost half would not have chosen the field knowing they would be handling HIV-positive samples. This high degree of concern may be an important factor contributing to the shortage of medical technologists. PMID:2400043

Measuring listening effort: driving simulator vs. simple dual-task paradigm

PubMed Central

Wu, Yu-Hsiang; Aksan, Nazan; Rizzo, Matthew; Stangl, Elizabeth; Zhang, Xuyang; Bentler, Ruth

2014-01-01

Objectives The dual-task paradigm has been widely used to measure listening effort. The primary objectives of the study were to (1) investigate the effect of hearing aid amplification and a hearing aid directional technology on listening effort measured by a complicated, more real world dual-task paradigm, and (2) compare the results obtained with this paradigm to a simpler laboratory-style dual-task paradigm. Design The listening effort of adults with hearing impairment was measured using two dual-task paradigms, wherein participants performed a speech recognition task simultaneously with either a driving task in a simulator or a visual reaction-time task in a sound-treated booth. The speech materials and road noises for the speech recognition task were recorded in a van traveling on the highway in three hearing aid conditions: unaided, aided with omni directional processing (OMNI), and aided with directional processing (DIR). The change in the driving task or the visual reaction-time task performance across the conditions quantified the change in listening effort. Results Compared to the driving-only condition, driving performance declined significantly with the addition of the speech recognition task. Although the speech recognition score was higher in the OMNI and DIR conditions than in the unaided condition, driving performance was similar across these three conditions, suggesting that listening effort was not affected by amplification and directional processing. Results from the simple dual-task paradigm showed a similar trend: hearing aid technologies improved speech recognition performance, but did not affect performance in the visual reaction-time task (i.e., reduce listening effort). The correlation between listening effort measured using the driving paradigm and the visual reaction-time task paradigm was significant. The finding showing that our older (56 to 85 years old) participants’ better speech recognition performance did not result in reduced listening effort was not consistent with literature that evaluated younger (approximately 20 years old), normal hearing adults. Because of this, a follow-up study was conducted. In the follow-up study, the visual reaction-time dual-task experiment using the same speech materials and road noises was repeated on younger adults with normal hearing. Contrary to findings with older participants, the results indicated that the directional technology significantly improved performance in both speech recognition and visual reaction-time tasks. Conclusions Adding a speech listening task to driving undermined driving performance. Hearing aid technologies significantly improved speech recognition while driving, but did not significantly reduce listening effort. Listening effort measured by dual-task experiments using a simulated real-world driving task and a conventional laboratory-style task was generally consistent. For a given listening environment, the benefit of hearing aid technologies on listening effort measured from younger adults with normal hearing may not be fully translated to older listeners with hearing impairment. PMID:25083599

3D planning in orthognathic surgery: CAD/CAM surgical splints and prediction of the soft and hard tissues results - our experience in 16 cases.

PubMed

Aboul-Hosn Centenero, Samir; Hernández-Alfaro, Federico

2012-02-01

The aim of this article is to determine the advantages of 3D planning in predicting postoperative results and manufacturing surgical splints using CAD/CAM (Computer Aided Design/Computer Aided Manufacturing) technology in orthognathic surgery when the software program Simplant OMS 10.1 (Materialise(®), Leuven, Belgium) was used for the purpose of this study which was carried out on 16 patients. A conventional preoperative treatment plan was devised for each patient following our Centre's standard protocol, and surgical splints were manufactured. These splints were used as study controls. The preoperative treatment plans devised were then transferred to a 3D-virtual environment on a personal computer (PC). Surgery was simulated, the prediction of results on soft and hard tissue produced, and surgical splints manufactured using CAD/CAM technology. In the operating room, both types of surgical splints were compared and the degree of similitude in results obtained in three planes was calculated. The maxillary osteotomy line was taken as the point of reference. The level of concordance was used to compare the surgical splints. Three months after surgery a second set of 3D images were obtained and used to obtain linear and angular measurements on screen. Using the Intraclass Correlation Coefficient these postoperative measurements were compared with the measurements obtained when predicting postoperative results. Results showed that a high degree of correlation in 15 of the 16 cases. A high coefficient of correlation was obtained in the majority of predictions of results in hard tissue, although less precise results were obtained in measurements in soft tissue in the labial area. The study shows that the software program used in the study is reliable for 3D planning and for the manufacture of surgical splints using CAD/CAM technology. Nevertheless, further progress in the development of technologies for the acquisition of 3D images, new versions of software programs, and further studies of objective data are necessary to increase precision in computerised 3D planning. Copyright © 2011 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Overview of NASA/OAST efforts related to manufacturing technology

NASA Technical Reports Server (NTRS)

Saunders, N. T.

1976-01-01

An overview of some of NASA's current efforts related to manufacturing technology and some possible directions for the future are presented. The topics discussed are: computer-aided design, composite structures, and turbine engine components.

Advanced transportation management technologies : participant notebook

DOT National Transportation Integrated Search

1997-04-01

The participant notebook was developed to proved a document that contains the visual aids for the participants as covered in the workshop of DP 105, Advanced Transportation Management Technologies. It contains the relevent information of the metropol...

Sustaining Innovation: Developing an Instructional Technology Assessment Process

ERIC Educational Resources Information Center

Carmo, Monica Cristina

2013-01-01

This case study developed an instructional technology assessment process for the Gevirtz Graduate School of Education (GGSE). The theoretical framework of Adelman and Taylor (2001) guided the development of this instructional technology assessment process and the tools to aid in its facilitation. GGSE faculty, staff, and graduate students…

75 FR 5796 - Danaher Corporation and MDS, Inc.; Analysis of Agreement Containing Consent Orders to Aid Public...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

..., Ontario, MDS is a life sciences company that operates three core businesses, MDS Analytical Technologies... life sciences company that manufactures and sells scientific research equipment that it distributes... devices and associated reagent products, to Life Technologies Corp. (``Life Technologies'') within 10 days...

The Shift in Assistive Technology

ERIC Educational Resources Information Center

Vlasak, Erin; Ranaldo, Michelle

2012-01-01

It is becoming increasingly clear that executive functioning deficits are a common area of concern for students and young adults with a variety of different intellectual disabilities. Assistive technology can be invaluable in aiding students and young adults in compensating for these deficits. The Assistive Technology Act of 1998, and the IDEA…

The Impact of Computer Technology on the Family.

ERIC Educational Resources Information Center

Bailey, Anne Wiseman

1982-01-01

Computer technology as it affects home and family life is explored. Elements of this technology which are examined include electronic fund transfers (EFT), consumer rights and responsibilities relating to use of EFT, working at home via computer, housing design, costs of computerizing the home, and computerized aids for the handicapped. (CT)

Use of acoustic technology to aid in the regulation of Ross Barnett Reservoir near Jackson, Mississippi: Trials and tribulations

USGS Publications Warehouse

Storm, J.B.

2004-01-01

The U.S. Geological Survey is computing continuous discharge of the Pearl River at the upper end of the Ross Barnett Reservoir near Jackson, Mississippi, using acoustic technology and conventional streamgaging methods. The computed inflow is posted "real-time" to the Mississippi District's web page where it can be monitored by the Pearl River Valley Water Supply District (PRVWSD) to aid in reservoir regulation. The use of this technology to determine discharge allows the PRVWSD to prepare for headwater flooding conditions ahead of time and adjust reservoir outflow accordingly. Hydraulic and acoustic problems inherent to this site have presented problems not normally encountered at a typical streamgaging site. Copyright ASCE 2004.

A technique for conducting point pattern analysis of cluster plot stem-maps

Treesearch

C.W. Woodall; J.M. Graham

2004-01-01

Point pattern analysis of forest inventory stem-maps may aid interpretation and inventory estimation of forest attributes. To evaluate the techniques and benefits of conducting point pattern analysis of forest inventory stem-maps, Ripley`s K(t) was calculated for simulated tree spatial distributions and for over 600 USDA Forest Service Forest...

Development and characterization of microsatellite markers in the Point Arena mountain beaver Aplodontia rufa nigra

Treesearch

Kristine L. Pilgrim; William J. Zielinski; Mary J. Mazurek; Frederick V. Schlexer; Michael K. Schwartz

2006-01-01

The Point Arena mountain beaver (Aplodontia rufa nigra) is an endangered subspecies. Efforts to recover this sub-species will be aided by advances in molecular genetics, specifically the ability to estimate population size using noninvasive genetic sampling. Here we report on the development of nine polymorphic loci for the Point Arena mountain...

Diagnostic Flow Cytometry and the AIDS Pandemic.

PubMed

Clift, Ian C

2015-01-01

The onset of the AIDS pandemic in the early 1980s coincided with the convergence of technologies now collectively known as flow cytometry (FCM). Major advances in FCM led significantly toward our understanding of the pathogenicity of the disease, which in turn led to wider adoption of the technology, including using it effectively in a variety of diagnostics. CD4+ T lymphocyte population counts, along with human immunodeficiency virus (HIV) viral load, remain the gold standard in diagnosis and continue to play a major role in the monitoring of advanced retroviral therapies. Arguably, the spread of AIDS (acquired immunodeficiency syndrome), the HIV virus, and the toll of the virus on humanity have been considerably altered by the concurrent development of FCM, the details of which are presented herein. Copyright© by the American Society for Clinical Pathology (ASCP).

Hearing aid handling skills: relationship with satisfaction and benefit.

PubMed

Campos, Patrícia Danieli; Bozza, Amanda; Ferrari, Deborah Viviane

2014-01-01

To evaluate hearing aid handling skills for new and experienced users and to assess if such skills influence user's benefit and satisfaction. Seventy four participants (mean age of 70.43), experienced (n=37) or new hearing aid users (n=37) performed the tasks of "Practical Hearing Aid Skills Test" (PHAST), which were scored on a five-point Likert scale - higher scores indicate better hearing aid handling skills. Experienced users answered the International Outcome Inventory for Hearing Aids (IOI-HA) and the hearing aid benefit for handicap reduction was calculated by the hearing handicap inventory (HHIA/HHIE). Medians for PHAST total scores of 79 and 71% were obtained for experienced and new users, respectively - there were no significant difference between groups. Lower PHAST scores were observed for the tasks of volume control manipulation and telephone usage. Moderate correlations were obtained between IOI benefit and quality of life items and the PHAST scores. There was no correlation between the results of PHAST and demographic data of the participants. There was no difference in handling skills between new and experienced hearing aid users. Handling skills affected hearing aid benefit.

Fatalism and HIV/AIDS beliefs in rural Mali, West Africa.

PubMed

Hess, Rosanna F; McKinney, Dawn

2007-01-01

To examine beliefs about HIV/AIDS of rural Malians and to measure their level of fatalism in context of HIV/AIDS and prevention behaviors. Descriptive, correlational. An AIDS Knowledge and Beliefs survey and the Powe Fatalism Inventory (PFI)-HIV/AIDS version were administered to a convenience sample of 84 people at three health center maternity clinics in southeastern Mali, West Africa. The sample's HIV/AIDS fatalism mean was 9.2 on a 15-point scale, with an internal consistency of .89. Health workers and more educated participants had significantly lower fatalism scores. Fatalism also varied by the combination of gender and ethnicity. People who believed that AIDS was not real, was a punishment from God, was fabricated by the West, was a curse, and that it was taboo to talk about AIDS had higher fatalism means. None of the prevention indicators were significantly related to fatalism scores. These rural Malians had a high overall fatalism mean and their beliefs about AIDS based on traditional culture may affect prevention behaviors. More research is needed to understand the influence of fatalism on prevention behaviors.

Pilot implementation of a technologically advanced system for the optimization of pre-hospital, trauma patient care.

PubMed

Vagianos, Constantine E; Dimopoulou, Efi; Tsiftsis, Dimitrios; Spyropoulos, Charalambos; Spyrakopoulos, Panagiotis; Vagenas, Konstantinos

2010-07-01

Cooperation between medical informatics, wireless communication and pre-hospital emergency services is essential for the optimal pre-hospital patient treatment. The use of technological innovations improves medical care in the pre-hospital setting with regard to the organization of an integrated center, which coordinates all parties involved for the patient's best interest. A dispatch center was developed in the city of Patras, in southwestern Greece, equipped with a Geographic Information System (GIS), which immediately points out the location of emergency vehicles (EVs) on a digital map depicting the city plan. Additionally, three ambulances of the National Center of Immediate Aid (NCIA) were equipped with a decentralized traffic management system for the vehicle's traffic priority at signaled junctions. The system consisted of a cellular-based (GSM) telemedicine module, a Global Positioning System (GPS) and a web camera system in the vehicle cabin. The aforementioned system provided considerable assistance to the pre-hospital treatment first by selecting the ambulance closest to the accident's location and then by pinpointing the optimum route to the hospital, thus significantly reducing the overall transportation time. The project's objective to coordinate emergency hospital departments involved in the treatment of trauma patients with other emergency services by utilizing high technology was achieved within this interdisciplinary effort.

Sharing and executing linked data queries in a collaborative environment.

PubMed

García Godoy, María Jesús; López-Camacho, Esteban; Navas-Delgado, Ismael; Aldana-Montes, José F

2013-07-01

Life Sciences have emerged as a key domain in the Linked Data community because of the diversity of data semantics and formats available through a great variety of databases and web technologies. Thus, it has been used as the perfect domain for applications in the web of data. Unfortunately, bioinformaticians are not exploiting the full potential of this already available technology, and experts in Life Sciences have real problems to discover, understand and devise how to take advantage of these interlinked (integrated) data. In this article, we present Bioqueries, a wiki-based portal that is aimed at community building around biological Linked Data. This tool has been designed to aid bioinformaticians in developing SPARQL queries to access biological databases exposed as Linked Data, and also to help biologists gain a deeper insight into the potential use of this technology. This public space offers several services and a collaborative infrastructure to stimulate the consumption of biological Linked Data and, therefore, contribute to implementing the benefits of the web of data in this domain. Bioqueries currently contains 215 query entries grouped by database and theme, 230 registered users and 44 end points that contain biological Resource Description Framework information. The Bioqueries portal is freely accessible at http://bioqueries.uma.es. Supplementary data are available at Bioinformatics online.

Life Quality Changes after HIV/AIDS Diagnosis: Positive Directions.

ERIC Educational Resources Information Center

Soule, Christine J.; Appleton, Valerie

Diagnosis of HIV/AIDS promotes a fear of the unknown, of death, or annihilation of self, of being, and of identity. Individuals face this threat in unique and holistic ways. This experience of crisis reflects stages of shock, disorganization, reorganization and resolution. Crisis can become a turning point and result in a passage toward successful…

Tuition and Financial Aid: Nine Points for Boards to Consider in Keeping College Affordable

ERIC Educational Resources Information Center

Baum, Sandy

2011-01-01

The headlines report that college tuition is rising rapidly and students are struggling to pay for college. Financial-aid issues have also been in the news lately, with questions about student debt particularly prominent. Non-tuition revenues are weak because of declining state appropriations, depleted endowments, and anemic annual giving. At the…

Reinventing Financial Aid: Charting a New Course to College Affordability

ERIC Educational Resources Information Center

Kelly, Andrew P., Ed.; Goldrick-Rab, Sara, Ed.

2014-01-01

In this provocative volume, two experts with very different points of view address the growing concern that student loan programs are not a sustainable solution to the problem of mounting college costs. They argue that the time has come to reform the financial aid system so that it is more effective in promoting college affordability, access, and…

Arizona Uncertainty: Arbitrary Barriers in Accessing Institutional Need-Based Financial Aid

ERIC Educational Resources Information Center

Hill-Zuganelli, Dee; Cabrera, Nolan L.; Milem, Jeffrey F.

2017-01-01

Established in 2008, the Arizona Assurance Scholars Program (AASP) channeled institutional needbased aid to in-state, low-income students. Rapidly growing costs prompted three changes to the AASP eligibility requirements in 2011. We examined how these new requirements--a 3.0 or higher high school grade point average and the submission of the Free…

78 FR 5153 - Proposed Amendment of Class E Airspace; Reno, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-24

... Compass Locator at the Instrument Landing System Middle Marker (LMM) and the Middle Marker (MM) has made... necessary due to the decommissioning of the LMM and the MM navigation aids. The Airport Reference Point (ARP) would be used to describe the airspace instead of the LMM and the MM navigational aids. There would be...

Towards a Mobile Intelligent Information System with Application to HIV/AIDS.

PubMed

Kopec, D; Eckhardt, R; Tamang, S; Reinharth, D

2005-01-01

The United Nations Security Council reports HIV/AIDS as the fastest growing threat to human development. In addition, the World Health Organization [1] reports that nearly 5 million persons (4.3 million adults and 700,000 children) are newly infected with HIV each year; more than 95% of them found in developing countries. Since STDs as a group are a personal problem which few people feel comfortable discussing, we believe that hand-held PDAs can provide an opportunity for learning about this disease while insuring anonymity. This device will employ the newest technologies including Bluetooth wireless technology, which can transmit and receive data via a short-range radio link using a globally available frequency band (2.4 GHz ISM band), enabling rapid and accurate synchronous and asynchronous data communication. The first generation of Bluetooth permits exchange of data up to a rate of 1 Mbps, even in areas with much electromagnetic disturbance. This emerging technology can facilitate HIV/AIDS outreach around the globe.Recent advances in learning have taken a particularly cognitive perspective and these findings have implications for education in general as well as for the development of intelligent tutoring systems in particular. In the past, effective SmartBookstrade markhave been developed for AIDS education to disseminate the critical knowledge relevant to this epidemic [2].Since 1993, the proliferation of the World Wide Web has created a plethora of new opportunities for the delivery of electronic distance learning systems. However, we feel that it is important that a whatever technology is employed is based on a sound educational theory. A new, comprehensive, web-based learning system called SmartTutor has been developed, at Brooklyn College of The City University of New York [3]. This technology provides a user-friendly, self-paced, easy to modify, software environment intended to serve the user's learning needs and is based on a generic SmartTutor methodology organized around the use of concept mapping. Early assessment of SmartTutor has shown that it is well received by students and helps significantly in their learning processes. It is readily adaptable to the presentation of academic and more general subject matter such as the latest available information on HIV/AIDS. Our new HIV/AIDS SmartTutor will incorporate this SmartTutor paradigm. Our new SmartTutor would provide worldwide access to medical professionals as well as the general public to learn about HIV/AIDS. This new device could also provide a survey tool to facilitate HIV risk assessment. Demonstrations of the SmartTutor learning system will be presented and the continued development of the applications will be discussed.

Convex Hull Aided Registration Method (CHARM).

PubMed

Fan, Jingfan; Yang, Jian; Zhao, Yitian; Ai, Danni; Liu, Yonghuai; Wang, Ge; Wang, Yongtian

2017-09-01

Non-rigid registration finds many applications such as photogrammetry, motion tracking, model retrieval, and object recognition. In this paper we propose a novel convex hull aided registration method (CHARM) to match two point sets subject to a non-rigid transformation. First, two convex hulls are extracted from the source and target respectively. Then, all points of the point sets are projected onto the reference plane through each triangular facet of the hulls. From these projections, invariant features are extracted and matched optimally. The matched feature point pairs are mapped back onto the triangular facets of the convex hulls to remove outliers that are outside any relevant triangular facet. The rigid transformation from the source to the target is robustly estimated by the random sample consensus (RANSAC) scheme through minimizing the distance between the matched feature point pairs. Finally, these feature points are utilized as the control points to achieve non-rigid deformation in the form of thin-plate spline of the entire source point set towards the target one. The experimental results based on both synthetic and real data show that the proposed algorithm outperforms several state-of-the-art ones with respect to sampling, rotational angle, and data noise. In addition, the proposed CHARM algorithm also shows higher computational efficiency compared to these methods.

A Cluster Randomized Controlled Trial on the Effects of Technology-aided Testing and Feedback on Physical Activity and Biological Age Among Employees in a Medium-sized Enterprise.

PubMed

Liukkonen, Mika; Nygård, Clas-Håkan; Laukkanen, Raija

2017-12-01

It has been suggested that engaging technology can empower individuals to be more proactive about their health and reduce their health risks. The aim of the present intervention was to study the effects of technology-aided testing and feedback on physical activity and biological age of employees in a middle-sized enterprise. In all, 121 employees (mean age 42 ± 10 years) participated in the 12-month three-arm cluster randomized trial. The fitness measurement process (Body Age) determined the participants' biological age in years. Physical activity was measured with the International Physical Activity Questionnaire Short Form. Physical activity did not change during the intervention. Biological age (better fitness) improved in all groups statistically significantly ( p  < 0.001), but with no interaction effects. The mean changes (years) in the groups were -2.20 for the controls, -2.83 for the group receiving their biological age and feedback, and -2.31 for the group receiving their biological age, feedback, and a training computer. Technology-aided testing with feedback does not seem to change the amount of physical activity but may enhance physical fitness measured by biological age.

Investigation of Air Transportation Technology at Ohio University, 1989-1990

NASA Technical Reports Server (NTRS)

Lilley, Robert W.

1990-01-01

The activities of the participants in the Joint University Program (JUP) at Ohio University are briefly surveyed. During 1989 to 1990, five topics received emphasis. A spectrum-efficient weather data uplink system was designed, constructed, and flight tested. An integrated Global Positioning System/Inertial Navigation System (GPS/INS) study continued, utilizing the Redundant strapdown Inertial Measurement Unit (IMU) on loan from NASA. The Ridge Regression theory was refined and applied to air navigation scenarios. System Identification theory was applied to GPS data to point the way to better understanding of the effects of Selective Availability on civilian users of this navigation system. An analysis of thought-related (electroencephalographic) signals for application to control of computer systems that could have significance in aiding paraplegics or for hands-off systems control in industrial or air traffic control areas was carried out.

Slow walking model for children with multiple disabilities via an application of humanoid robot

NASA Astrophysics Data System (ADS)

Wang, ZeFeng; Peyrodie, Laurent; Cao, Hua; Agnani, Olivier; Watelain, Eric; Wang, HaoPing

2016-02-01

Walk training research with children having multiple disabilities is presented. Orthosis aid in walking for children with multiple disabilities such as Cerebral Palsy continues to be a clinical and technological challenge. In order to reduce pain and improve treatment strategies, an intermediate structure - humanoid robot NAO - is proposed as an assay platform to study walking training models, to be transferred to future special exoskeletons for children. A suitable and stable walking model is proposed for walk training. It would be simulated and tested on NAO. This comparative study of zero moment point (ZMP) supports polygons and energy consumption validates the model as more stable than the conventional NAO. Accordingly direction variation of the center of mass and the slopes of linear regression knee/ankle angles, the Slow Walk model faithfully emulates the gait pattern of children.

Using OpenEHR in SICTI an electronic health record system for critical medicine

NASA Astrophysics Data System (ADS)

Filgueira, R.; Odriazola, A.; Simini, F.

2007-11-01

SICTI is a software tool for registering health records in critical medicine environments. Version 1.0 has been in use since 2003. The Biomedical Engineering Group (Núcleo de Ingeniería Biomédica), with support from the Technological Development Programme (Programa de Desarrollo Tecnológico), decided to develop a new version, to provide an aid for more critical medicine processes, based on a framework which would make the application domain change oriented. The team analyzed three alternatives: to develop an original product based on new research, to base the development on OpenEHR framework, or to use HL7 RIM as the reference model for SICTI. The team opted for OpenEHR. This work describes the use of OpenEHR, its strong and weak points, and states future work perspectives.

A Comparison of Fifth Grade Children Receiving Both a Traditional and a Technology Based Means of Instruction in Social Studies.

ERIC Educational Resources Information Center

Larson, Thomas Donald

With advances being made in the area of technology and increased emphasis being placed on use of technology in the classroom, teachers and administrators are questioning the effectiveness of technology driven teaching aids. The present issue revolves around whether students' academic performance can be enhanced by using and incorporating…

Veteran Teachers' Perceptions of the Factors Influencing the Incorporation of Advanced Technology into Their Classrooms

ERIC Educational Resources Information Center

Jones, Naeemah T.

2013-01-01

Technology has aided in the reshaping of traditional education as new and advanced digital technologies have been and are continuing to be implemented in schools. Recent research suggests that veteran teachers use such technology less than novice teachers and demonstrate less proficiency in its use. The research also suggests that attitudes and…

The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

ERIC Educational Resources Information Center

Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

2013-01-01

This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

Public Enlightenment Education on the Acceptance of Fingerprint Biometric Technology for Administration in Academic Institutions and Other Organizations

ERIC Educational Resources Information Center

Eze, Samuel Godwin; Chijioke, Edmond Ogochukwu

2016-01-01

This research presents the overview of the origin of fingerprint biometric technology, the opinion of the public on the acceptance of fingerprint biometric technology and the means of instilling confidence on the public for the total acceptance of the technology. Data was collected with the aid of a lecture and structured questionnaires…

Using computer aided case based reasoning to support clinical reasoning in community occupational therapy.

PubMed

Taylor, Bruce; Robertson, David; Wiratunga, Nirmalie; Craw, Susan; Mitchell, Dawn; Stewart, Elaine

2007-08-01

Community occupational therapists have long been involved in the provision of environmental control systems. Diverse electronic technologies with the potential to improve the health and quality of life of selected clients have developed rapidly in recent years. Occupational therapists employ clinical reasoning in order to determine the most appropriate technology to meet the needs of individual clients. This paper describes a number of the drivers that may increase the adoption of information and communication technologies in the occupational therapy profession. It outlines case based reasoning as understood in the domains of expert systems and knowledge management and presents the preliminary results of an ongoing investigation into the potential of a prototype computer aided case based reasoning tool to support the clinical reasoning of community occupational therapists in the process of assisting clients to choose home electronic assistive or smart house technology.

Understanding dental CAD/CAM for restorations--the digital workflow from a mechanical engineering viewpoint.

PubMed

Tapie, L; Lebon, N; Mawussi, B; Fron Chabouis, H; Duret, F; Attal, J-P

2015-01-01

As digital technology infiltrates every area of daily life, including the field of medicine, so it is increasingly being introduced into dental practice. Apart from chairside practice, computer-aided design/computer-aided manufacturing (CAD/CAM) solutions are available for creating inlays, crowns, fixed partial dentures (FPDs), implant abutments, and other dental prostheses. CAD/CAM dental solutions can be considered a chain of digital devices and software for the almost automatic design and creation of dental restorations. However, dentists who want to use the technology often do not have the time or knowledge to understand it. A basic knowledge of the CAD/CAM digital workflow for dental restorations can help dentists to grasp the technology and purchase a CAM/CAM system that meets the needs of their office. This article provides a computer-science and mechanical-engineering approach to the CAD/CAM digital workflow to help dentists understand the technology.

A hybrid lung and vessel segmentation algorithm for computer aided detection of pulmonary embolism

NASA Astrophysics Data System (ADS)

Raghupathi, Laks; Lakare, Sarang

2009-02-01

Advances in multi-detector technology have made CT pulmonary angiography (CTPA) a popular radiological tool for pulmonary emboli (PE) detection. CTPA provide rich detail of lung anatomy and is a useful diagnostic aid in highlighting even very small PE. However analyzing hundreds of slices is laborious and time-consuming for the practicing radiologist which may also cause misdiagnosis due to the presence of various PE look-alike. Computer-aided diagnosis (CAD) can be a potential second reader in providing key diagnostic information. Since PE occurs only in vessel arteries, it is important to mark this region of interest (ROI) during CAD preprocessing. In this paper, we present a new lung and vessel segmentation algorithm for extracting contrast-enhanced vessel ROI in CTPA. Existing approaches to segmentation either provide only the larger lung area without highlighting the vessels or is computationally prohibitive. In this paper, we propose a hybrid lung and vessel segmentation which uses an initial lung ROI and determines the vessels through a series of refinement steps. We first identify a coarse vessel ROI by finding the "holes" from the lung ROI. We then use the initial ROI as seed-points for a region-growing process while carefully excluding regions which are not relevant. The vessel segmentation mask covers 99% of the 259 PE from a real-world set of 107 CTPA. Further, our algorithm increases the net sensitivity of a prototype CAD system by 5-9% across all PE categories in the training and validation data sets. The average run-time of algorithm was only 100 seconds on a standard workstation.

Power capacity from earcanal dynamic motion

NASA Astrophysics Data System (ADS)

Carioli, Johan; Delnavaz, Aidin; Zednik, Ricardo J.; Voix, Jérémie

2016-12-01

In-ear devices, such as a hearing aids, electronic earplugs, and wearables, need electrical power to operate. Batteries are the current solution, but unfortunately they also create other problems. For example, several hundred million users, mostly elderly, must change their hearing aid batteries on a weekly basis, which represents not only significant financial costs but a negative environmental impact. A promising alternative involves harvesting energy by converting the dynamic jaw movements into electrical energy via the earcanal. The extent that jaw movements distort the earcanal is still unknown, making it difficult to design the appropriate energy harvesting system for the earplug. Moreover, the finite element methods are barely capable to model the behavior of the earcanal distortion because of the complexity of mechanisms that deform the earcanal. However, this paper presents an alternative method, based on analytical considerations, to understand in-ear mechanical quasi-static deformations using earcanal point clouds. This model quantifies the bending and compressive movements of the earcanal. It can therefore be used to select an appropriate deformation mode for harvesting energy from the earcanal's dynamic motion. The value of this approach was illustrated by calculating the obtainable mechanical energy from 12 human subjects. On average, the bending energy in a human earcanal was found to be three times greater than the radial compression energy. This key finding will need to be considered in the design of future in-ear energy harvesting devices. Such an energy harvesting device has the potential to revolutionize the market for in-ear wearable devices and hearing aids by complementing or replacing battery technology.

Assessing the outcomes of prolonged cessation-induction and aid-to-cessation trials: floating prolonged abstinence.

PubMed

Aveyard, Paul; Wang, Dechao; Connock, Martin; Fry-Smith, Anne; Barton, Pelham; Moore, David

2009-05-01

A Society for Research on Nicotine and Tobacco working group recommended outcome measures for cessation-induction trials and aid-to-cessation trials. Cessation-induction trials aim to motivate unwilling quitters to make a quit attempt. Aid-to-cessation trials give either medication or behavioral interventions to increase the rate at which willing quitters succeed in their attempts. Nicotine-assisted reduction programs combine features of both types of interventions by giving nicotine replacement to unwilling quitters. Treatment can be prolonged more than a year, quit attempts can occur and succeed early or late in the program, and renewed quit attempts are an inherent part of the program. Conventional outcome measures are tied to a fixed but arbitrary point in follow-up and cannot capture the true outcome: Prolonged cessation anchored to the point at which a person makes a successful quit attempt. We propose that the outcome should be counted from the successful quit attempt that began during the treatment period and continues for a defined period, ideally 6 months. In particular, if a trial compared a short reduction program with a long reduction program, it would not be possible to obtain an unbiased assessment of the outcome of such a trial using a measure tied to a fixed point in follow-up. Floating prolonged abstinence could provide such an assessment and is suitable for either prolonged cessation-induction trial or combined cessation-induction and aid-to-cessation trials.

Machine tools and fixtures: A compilation

NASA Technical Reports Server (NTRS)

1971-01-01

As part of NASA's Technology Utilizations Program, a compilation was made of technological developments regarding machine tools, jigs, and fixtures that have been produced, modified, or adapted to meet requirements of the aerospace program. The compilation is divided into three sections that include: (1) a variety of machine tool applications that offer easier and more efficient production techniques; (2) methods, techniques, and hardware that aid in the setup, alignment, and control of machines and machine tools to further quality assurance in finished products: and (3) jigs, fixtures, and adapters that are ancillary to basic machine tools and aid in realizing their greatest potential.

NATIONAL RESPONSE TEAM TECHNICAL ASSISTANCE ...

EPA Pesticide Factsheets

This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public. This document provides technical information on a wide range of activities to aid in response to intentional release of anthrax in urban environments. It includes initial actions when a potential release is discovered, health and safety issues for responders, sampling and analysis methods, decontamination technologies, decontamination waste disposal, and communication with public.

Medical Imaging System

NASA Technical Reports Server (NTRS)

1991-01-01

The MD Image System, a true-color image processing system that serves as a diagnostic aid and tool for storage and distribution of images, was developed by Medical Image Management Systems, Huntsville, AL, as a "spinoff from a spinoff." The original spinoff, Geostar 8800, developed by Crystal Image Technologies, Huntsville, incorporates advanced UNIX versions of ELAS (developed by NASA's Earth Resources Laboratory for analysis of Landsat images) for general purpose image processing. The MD Image System is an application of this technology to a medical system that aids in the diagnosis of cancer, and can accept, store and analyze images from other sources such as Magnetic Resonance Imaging.

Pilot clinical trial of a robot-aided neuro-rehabilitation workstation with stroke patients

NASA Astrophysics Data System (ADS)

Krebs, Hermano I.; Hogan, Neville; Aisen, Mindy L.; Volpe, Bruce T.

1996-12-01

This paper summarizes our efforts to apply robotics and automation technology to assist, enhance, quantify, and document neuro-rehabilitation. It reviews a pilot clinical trial involving twenty stroke patients with a prototype robot-aided rehabilitation facility developed at MIT and tested at Burke Rehabilitation Hospital. In particular, we present a few results: (a) on the patient's tolerance of the procedure, (b) whether peripheral manipulation of the impaired limb influences brain recovery, (c) on the development of a robot-aided assessment procedure.

Intelligent Computer-Aided Instruction Research at the Open University. CITE Report No. 10.

ERIC Educational Resources Information Center

Elsom-Cook, Mark

This document introduces the aims and activities of the Intelligent Computer Aided Instruction (ICAI) research community situated within the Centre for Information Technology in Education (CITE) at the Open University in Great Britain, outlines the nature of the problems which come under the auspices of ICAI, and describes the research…

Exploring Novice Teachers' Cognitive Processes Using Digital Video Technology: A Qualitative Case Study

ERIC Educational Resources Information Center

Sun-Ongerth, Yuelu

2012-01-01

This dissertation describes a qualitative case study that investigated novice teachers' video-aided reflection on their own teaching. To date, most studies that have investigated novice teachers' video-aided reflective practice have focused on examining novice teachers' levels of reflective writing rather than the cognitive…

Concerned Technology 1989: Electronic Aids for People with Special Needs.

ERIC Educational Resources Information Center

Sandhu, Jim Singh; Richardson, Steve

In light of the implementation of Section 508 of the Rehabilitation Amendments Act of 1986 requiring that all electronic equipment purchased by the U.S. Government be accesible to the handicapped. this directory lists several hundred electronic aids for the disabled. The introduction humorously reviews the state of the art in software, artificial…

Computer Aided Instruction: A Study of Student Evaluations and Academic Performance

ERIC Educational Resources Information Center

Collins, David; Deck, Alan; McCrickard, Myra

2008-01-01

Computer aided instruction (CAI) encompasses a broad range of computer technologies that supplement the classroom learning environment and can dramatically increase a student's access to information. Criticism of CAI generally focuses on two issues: it lacks an adequate foundation in educational theory and the software is difficult to implement…

Using Computer Graphics in the 90's.

ERIC Educational Resources Information Center

Towne, Violet A.

Computer-Aided Design, a hands-on program for public school teachers, was first offered in the summer of 1987 as an outgrowth of a 1986 robotics training program. Area technology teachers needed computer-aided design (CAD) training because of a New York State Education system transition from the industrial arts curriculum to a new curriculum in…

A Report on Nursing Programs in Illinois Community Colleges.

ERIC Educational Resources Information Center

Illinois Community Coll. Board, Springfield.

As part of a fiscal year 1995 annual review of programs, the Illinois community colleges reviewed four nursing programs to assess how effectively they met the economic, social, and technological needs of the community. The nursing programs reviewed included registered nursing, practical nursing, nurse aide, and home health aide. Although the costs…

75 FR 39622 - Proposed Information Collection (Request for Nursing Home Information in Connection with Claim...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... (Request for Nursing Home Information in Connection with Claim for Aid and Attendance) Activity: Comment... needed to determine eligibility for aid and attendance for claimants who are patients in nursing home... techniques or the use of other forms of information technology. Title: Request for Nursing Home Information...

78 FR 29439 - Proposed Information Collection (Request for Nursing Home Information in Connection With Claim...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-20

... (Request for Nursing Home Information in Connection With Claim for Aid and Attendance) Activity: Comment... needed to determine eligibility for aid and attendance for claimants who are patients in nursing home... techniques or the use of other forms of information technology. Title: Request for Nursing Home Information...

Job Performance Aids: Research and Technology State-of-the-Art. Final Report.

ERIC Educational Resources Information Center

Booher, Harold R.

Conducted as part of a major effort to test and evaluate Job Performance Aids (JPA) and their integration with Navy personnel and training systems, this study systematically reviewed and organized existing JPA techniques, related research data, and various applicable principles and concepts. One hundred and one JPA systems and techniques were…

The Technology of Instruction in Mexican Universities.

ERIC Educational Resources Information Center

McGinn, Noel F.; And Others

The purposes of this study were to assess the presence and use of instructional aids and teaching arrangements in Mexican universities; to explain the existence and use of such aids; and to suggest policies and procedures intended to improve instruction in Mexican universities. Interviews were conducted with the directors of and a sample of…

Pointing and control system enabling technology for future automated space missions

NASA Technical Reports Server (NTRS)

Dahlgren, J. B.

1978-01-01

Future automated space missions present challenging opportunities in the pointing-and-control technology disciplines. The enabling pointing-and-control system technologies for missions from 1985 to the year 2000 were identified and assessed. A generic mission set including Earth orbiter, planetary, and other missions which predominantly drive the pointing-and-control requirements was selected for detailed evaluation. Technology candidates identified were prioritized as planning options for future NASA-OAST advanced development programs. The primary technology thrusts in each candidate program were cited, and advanced development programs in pointing-and-control were recommended for the FY 80 to FY 87 period, based on these technology thrusts.

Vascular tissue engineering by computer-aided laser micromachining.

PubMed

Doraiswamy, Anand; Narayan, Roger J

2010-04-28

Many conventional technologies for fabricating tissue engineering scaffolds are not suitable for fabricating scaffolds with patient-specific attributes. For example, many conventional technologies for fabricating tissue engineering scaffolds do not provide control over overall scaffold geometry or over cell position within the scaffold. In this study, the use of computer-aided laser micromachining to create scaffolds for vascular tissue networks was investigated. Computer-aided laser micromachining was used to construct patterned surfaces in agarose or in silicon, which were used for differential adherence and growth of cells into vascular tissue networks. Concentric three-ring structures were fabricated on agarose hydrogel substrates, in which the inner ring contained human aortic endothelial cells, the middle ring contained HA587 human elastin and the outer ring contained human aortic vascular smooth muscle cells. Basement membrane matrix containing vascular endothelial growth factor and heparin was to promote proliferation of human aortic endothelial cells within the vascular tissue networks. Computer-aided laser micromachining provides a unique approach to fabricate small-diameter blood vessels for bypass surgery as well as other artificial tissues with complex geometries.

HIV/AIDS and bioethics: historical perspective, personal retrospective.

PubMed

Bryan, Charles S

2002-01-01

Problems posed by HIV/AIDS differ from those of past epidemics by virtue of unique properties of the causative agent, dramatic societal changes of the late 20th century, and the transition of medical practice from a professional ethic to a technology-dependent business ethic. HIV/AIDS struck during the coming-of-age of molecular biology and also of bioethics, and the epidemic stimulated the growth of both disciplines. The number of articles published about AIDS and ethics (as identified by a MEDLINE search) peaked in 1990, just before the peak incidence of AIDS in the United States. The character of ethical dialogue has now shifted from familiar moral quandaries such as civil liberty versus public welfare to concerns about vaccine trials and public policy toward the developing world. Physicians and other health care workers who were involved from the onset endured something of an emotional roller coaster. Their compassion-based work ethic was to a large extent replaced by a competence-based work ethic after the introduction in 1996 of highly active antiretroviral therapy. The abundant recent literature on "professionalism" in medicine makes scant mention of AIDS/HIV. The disruptive effect of AIDS/HIV on society would have been substantially greater had relevant technology such as the ability to isolate retroviruses and potent therapy against tuberculosis not been in place. This sobering consideration, along with such recent events as the use of bioterrorism against civilian populations, suggests new relevance for Potter's definition of "bioethics" as a science of survival in which the biology of ecosystems must be taken into account.

Modern adjuncts and technologies in microsurgery: an historical and evidence-based review.

PubMed

Pratt, George F; Rozen, Warren M; Chubb, Daniel; Whitaker, Iain S; Grinsell, Damien; Ashton, Mark W; Acosta, Rafael

2010-11-01

While modern reconstructive surgery was revolutionized with the introduction of microsurgical techniques, microsurgery itself has seen the introduction of a range of technological aids and modern techniques aiming to improve dissection times, anastomotic times, and overall outcomes. These include improved preoperative planning, anastomotic aides, and earlier detection of complications with higher salvage rates. Despite the potential for substantial impact, many of these techniques have been evaluated in a limited fashion, and the evidence for each has not been universally explored. The purpose of this review was to establish and quantify the evidence for each technique. A search of relevant medical databases was performed to identify literature providing evidence for each technology. Levels of evidence were thus accumulated and applied to each technique. There is a relative paucity of evidence for many of the more recent technologies described in the field of microsurgery, with no randomized controlled trials, and most studies in the field comprising case series only. Current evidence-based suggestions include the use of computed tomographic angiography (CTA) for the preoperative planning of perforator flaps, the intraoperative use of a mechanical anastomotic coupling aide (particularly the Unilink® coupler), and postoperative flap monitoring with strict protocols using clinical bedside monitoring and/or the implantable Doppler probe. Despite the breadth of technologies introduced into the field of microsurgery, there is substantial variation in the degree of evidence presented for each, suggesting the role for much future research, particularly from emerging technologies such as robotics and modern simulators. Copyright © 2010 Wiley-Liss, Inc.

Technology for the Nineties. RESNA '91: Proceedings of the Annual Conference (14th, Kansas City, Missouri, June 21-26, 1991).

ERIC Educational Resources Information Center

Presperin, Jessica J., Ed.

This proceedings document contains approximately 150 papers and 50 poster sessions presented at a conference on the advancement of rehabilitation and assistive technology. Individual sessions focused on the following topics: gerontology, robotics, technology transfer, sensory aids, computer applications, information dissemination, service delivery…

77 FR 14523 - Western Digital Corporation; Analysis of Agreement Containing Consent Order to Aid Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-12

... of Viviti Technologies Ltd., formerly known as Hitachi Global Storage Technologies Ltd. (``HGST''), a... negotiate the purchase price of desktop HDDs at a global level. The desktop HDD market is highly... Digital'') proposed acquisition of Viviti Technologies Ltd., formerly known as Hitachi Global Storage...

An Evaluation of Computer-Managed Education Technology at New York City Community College.

ERIC Educational Resources Information Center

Chitayat, Linda

The Computer-Managed Education Technology (COMET) program was designed to improve group instruction through the use of technological aids in the classroom. Specific objectives included: (1) improving feedback on student comprehension during a class period; (2) facilitating the administration and grading of homework and quizzes; (3) providing for…

Predicting Acceptance of Mobile Technology for Aiding Student-Lecturer Interactions: An Empirical Study

ERIC Educational Resources Information Center

Gan, Chin Lay; Balakrishnan, Vimala

2017-01-01

The current study sets out to identify determinants affecting tertiary students' behavioural intentions to use mobile technology in lectures. The study emphasises that the reason for using mobile technology in classrooms with large numbers of students is to facilitate interactions among students and lecturers. The proposed conceptual framework has…

Tech Team: Student Technology Assistants in the Elementary & Middle School.

ERIC Educational Resources Information Center

Peto, Erica; Onishi, Esther; Irish, Barbara

A step-by-step manual of worksheets, templates, forms and examples, this comprehensive handbook is designed for librarians, classroom teachers, and technology specialists who are interested in training students to be technology aides. The "Tech Team" program not only systematically outlines how one organizes and manages a support program, but…

Human Rehabilitation Techniques. Final Report. Volume 1, Part A.

ERIC Educational Resources Information Center

Dudek, R. A.; And Others

The first volume of a six-volume final report describes the activities and findings of a research project to identify the policy-related aspects and technology involved in efforts to aid disabled individuals in the United States. In Chapter 1, various types of technology assessments are explained, and general results of the technology assessment…

Comment on Technology-Based Intervention Research for Individuals on the Autism Spectrum

ERIC Educational Resources Information Center

McCleery, Joseph P.

2015-01-01

The purpose of this letter to the editor is to comment on several review papers recently published in the current "Journal of Autism and Developmental Disorders, Special Issue on Technology: Software, Robotics, and Translational Science." These reviews address a variety of aspects relating to technology-aided intervention and instruction…

78 FR 9051 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-07

... Information Technology Phase 1.'' In accordance with the Paperwork Reduction Act, 44 U.S.C. 3501-3521, AHRQ... Technology Phase 1 This project is the first phase in AHRQ's effort toward the development of a health information technology (HIT) enabled tool designed to aid adolescents and young adults with sickle cell...

Assistive Technology for Students with Mild Disabilities: Update 2002. ERIC Digest.

ERIC Educational Resources Information Center

Behrmann, Michael; Jerome, Marci Kinas

This digest discusses six identified areas of instruction in which assistive technology can aid students with mild disabilities. It begins by discussing how assistive technology can help the student's organization. Low-tech solutions are explained, including teaching students to organize their thoughts or work using flow-charting, task analysis,…

Developing a Computer Touch-Screen Interactive Colorectal Screening Decision Aid for a Low-Literacy African American Population: Lessons Learned

PubMed Central

Bass, Sarah Bauerle; Gordon, Thomas F.; Ruzek, Sheryl Burt; Wolak, Caitlin; Ruggieri, Dominique; Mora, Gabriella; Rovito, Michael J.; Britto, Johnson; Parameswaran, Lalitha; Abedin, Zainab; Ward, Stephanie; Paranjape, Anuradha; Lin, Karen; Meyer, Brian; Pitts, Khaliah

2017-01-01

African Americans have higher colorectal cancer (CRC) mortality than White Americans and yet have lower rates of CRC screening. Increased screening aids in early detection and higher survival rates. Coupled with low literacy rates, the burden of CRC morbidity and mortality is exacerbated in this population, making it important to develop culturally and literacy appropriate aids to help low-literacy African Americans make informed decisions about CRC screening. This article outlines the development of a low-literacy computer touch-screen colonoscopy decision aid using an innovative marketing method called perceptual mapping and message vector modeling. This method was used to mathematically model key messages for the decision aid, which were then used to modify an existing CRC screening tutorial with different messages. The final tutorial was delivered through computer touch-screen technology to increase access and ease of use for participants. Testing showed users were not only more comfortable with the touch-screen technology but were also significantly more willing to have a colonoscopy compared with a “usual care group.” Results confirm the importance of including participants in planning and that the use of these innovative mapping and message design methods can lead to significant CRC screening attitude change. PMID:23132838

A floor-map-aided WiFi/pseudo-odometry integration algorithm for an indoor positioning system.

PubMed

Wang, Jian; Hu, Andong; Liu, Chunyan; Li, Xin

2015-03-24

This paper proposes a scheme for indoor positioning by fusing floor map, WiFi and smartphone sensor data to provide meter-level positioning without additional infrastructure. A topology-constrained K nearest neighbor (KNN) algorithm based on a floor map layout provides the coordinates required to integrate WiFi data with pseudo-odometry (P-O) measurements simulated using a pedestrian dead reckoning (PDR) approach. One method of further improving the positioning accuracy is to use a more effective multi-threshold step detection algorithm, as proposed by the authors. The "go and back" phenomenon caused by incorrect matching of the reference points (RPs) of a WiFi algorithm is eliminated using an adaptive fading-factor-based extended Kalman filter (EKF), taking WiFi positioning coordinates, P-O measurements and fused heading angles as observations. The "cross-wall" problem is solved based on the development of a floor-map-aided particle filter algorithm by weighting the particles, thereby also eliminating the gross-error effects originating from WiFi or P-O measurements. The performance observed in a field experiment performed on the fourth floor of the School of Environmental Science and Spatial Informatics (SESSI) building on the China University of Mining and Technology (CUMT) campus confirms that the proposed scheme can reliably achieve meter-level positioning.

Symposium on Biomedical Applications of Basic Research Held in Woods Hole, Massachusetts on 15 August 1988.

DTIC Science & Technology

1989-02-10

to the AIDS virus , in a presentation titled "Marine Invertebrate Immunity: The AIDS Cqnnectlon." Funding for "Biomedical Applications of Basic...ibl itY Codes iAv ~li anti/or Dist. Spoc al The February evening in 1975 after MV Islander hit the Gould are Alan G. Lunn, left, marine contractor...discovery 25 years ago in the mtnt, Dr. Kornberg pointed out. is that the AIDS virus is covea, they are abundant only where laboratory of Frederik B

Challenges and Recent Developments in Hearing Aids: Part I. Speech Understanding in Noise, Microphone Technologies and Noise Reduction Algorithms

PubMed Central

Chung, King

2004-01-01

This review discusses the challenges in hearing aid design and fitting and the recent developments in advanced signal processing technologies to meet these challenges. The first part of the review discusses the basic concepts and the building blocks of digital signal processing algorithms, namely, the signal detection and analysis unit, the decision rules, and the time constants involved in the execution of the decision. In addition, mechanisms and the differences in the implementation of various strategies used to reduce the negative effects of noise are discussed. These technologies include the microphone technologies that take advantage of the spatial differences between speech and noise and the noise reduction algorithms that take advantage of the spectral difference and temporal separation between speech and noise. The specific technologies discussed in this paper include first-order directional microphones, adaptive directional microphones, second-order directional microphones, microphone matching algorithms, array microphones, multichannel adaptive noise reduction algorithms, and synchrony detection noise reduction algorithms. Verification data for these technologies, if available, are also summarized. PMID:15678225

Intelligent instrumentation applied in environment management

NASA Astrophysics Data System (ADS)

Magheti, Mihnea I.; Walsh, Patrick; Delassus, Patrick

2005-06-01

The use of information and communications technology in environment management and research has witnessed a renaissance in recent years. From optical sensor technology, expert systems, GIS and communications technologies to computer aided harvesting and yield prediction, these systems are increasable used for applications developing in the management sector of natural resources and biodiversity. This paper presents an environmental decision support system, used to monitor biodiversity and present a risk rating for the invasion of pests into the particular systems being examined. This system will utilise expert mobile technology coupled with artificial intelligence and predictive modelling, and will emphasize the potential for expansion into many areas of intelligent remote sensing and computer aided decision-making for environment management or certification. Monitoring and prediction in natural systems, harnessing the potential of computing and communication technologies is an emerging technology within the area of environmental management. This research will lead to the initiation of a hardware and software multi tier decision support system for environment management allowing an evaluation of areas for biodiversity or areas at risk from invasive species, based upon environmental factors/systems.

Change in Number and Types of Postsecondary Institutions: 2000 to 2014. Data Point. NCES 2017-008

ERIC Educational Resources Information Center

Hudson, Lisa

2017-01-01

This Data Point uses data from the Integrated Postsecondary Education Data System (IPEDS). IPEDS is an annual data collection of all postsecondary institutions in the United States and outlying territories that participate in Title IV federal student financial aid programs. This Data Point presents IPEDS data for U.S. undergraduate institutions in…

Substance Abuse and Mental Health Services Administration

MedlinePlus

... Health Systems Integration Health Disparities Health Financing Health Information Technology HIV, AIDS, and Viral Hepatitis Homelessness and Housing ... Resource Centers Center for the Application of Prevention Technologies (CAPT) Homelessness ... More Grants Information 2017 Grant Awards Grant Awards by State SAMHSA ...

SNP-VISTA: An interactive SNP visualization tool

PubMed Central

Shah, Nameeta; Teplitsky, Michael V; Minovitsky, Simon; Pennacchio, Len A; Hugenholtz, Philip; Hamann, Bernd; Dubchak, Inna L

2005-01-01

Background Recent advances in sequencing technologies promise to provide a better understanding of the genetics of human disease as well as the evolution of microbial populations. Single Nucleotide Polymorphisms (SNPs) are established genetic markers that aid in the identification of loci affecting quantitative traits and/or disease in a wide variety of eukaryotic species. With today's technological capabilities, it has become possible to re-sequence a large set of appropriate candidate genes in individuals with a given disease in an attempt to identify causative mutations. In addition, SNPs have been used extensively in efforts to study the evolution of microbial populations, and the recent application of random shotgun sequencing to environmental samples enables more extensive SNP analysis of co-occurring and co-evolving microbial populations. The program is available at [1]. Results We have developed and present two modifications of an interactive visualization tool, SNP-VISTA, to aid in the analyses of the following types of data: A. Large-scale re-sequence data of disease-related genes for discovery of associated and/or causative alleles (GeneSNP-VISTA). B. Massive amounts of ecogenomics data for studying homologous recombination in microbial populations (EcoSNP-VISTA). The main features and capabilities of SNP-VISTA are: 1) mapping of SNPs to gene structure; 2) classification of SNPs, based on their location in the gene, frequency of occurrence in samples and allele composition; 3) clustering, based on user-defined subsets of SNPs, highlighting haplotypes as well as recombinant sequences; 4) integration of protein evolutionary conservation visualization; and 5) display of automatically calculated recombination points that are user-editable. Conclusion The main strength of SNP-VISTA is its graphical interface and use of visual representations, which support interactive exploration and hence better understanding of large-scale SNP data by the user. PMID:16336665

A 30-year bibliometric analysis of research coverage on HIV and AIDS in Lesotho.

PubMed

Mugomeri, Eltony; Bekele, Bisrat S; Mafaesa, Mamajoin; Maibvise, Charles; Tarirai, Clemence; Aiyuk, Sunny E

2017-03-21

Given the well documented undesired impacts of HIV/AIDS globally, there is a need to create a statistical inventory of research output on HIV/AIDS. This need is particularly important for a country such as Lesotho, whose HIV/AIDS prevalence is one of the highest globally. Research on HIV/AIDS in sub-Saharan Africa continues to trail behind that of other regions, especially those of the developed countries. Lesotho, a sub-Saharan country, is a developing country with lower research output in this area when longitudinally compared to other countries. This study reviewed the volume and scope of the general research output on HIV/AIDS in Lesotho and assessed the coverage of the national research agenda on HIV/AIDS, making recourse to statistical principles. A bibliometric review of studies on HIV/AIDS retrieved from the SCOPUS and PubMed databases, published within the 30-year period between 1985 and 2016, was conducted. The focus of each of the studies was analysed and the studies were cross-matched with the national research agenda in accordance with bibliometric methodologies. In total, 1280 studies comprising 1181 (92.3%) journal articles, 91 (7.1%) books and 8 (0.6%) conference proceedings were retrieved. By proportion, estimation of burden of infection (40.7%) had the highest research volume, while basic (5.5%) and preventive measures (24.4%) and national planning (29.4%) had the lowest. Out of the total studies retrieved, only 516 (40.3%) matched the national research agenda. Research on maternal and child health quality of care, viral load point-of-care devices, and infant point-of-care diagnosis had hardly any publications in the high priority research category of the agenda. Notwithstanding a considerable research output on HIV/AIDS for Lesotho, there is insufficient coverage of the national research agenda in this research area. The major research gaps on general research output are in basic and preventive measures as well as national planning. There is also a need to increase targeted funding for HIV/AIDS research to appropriately address the most compelling gaps and national needs.

Guided Immediate Implant Placement with Wound Closure by Computer-Aided Design/Computer-Assisted Manufacture Sealing Socket Abutment: Case Report.

PubMed

Finelle, Gary; Lee, Sang J

Digital technology has been widely used in the field of implant dentistry. From a surgical standpoint, computer-guided surgery can be utilized to enhance primary implant stability and to improve the precision of implant placement. From a prosthetic standpoint, computer-aided design/computer-assisted manufacture (CAD/CAM) technology has brought about various restorative options, including the fabrication of customized abutments through a virtual design based on computer-guided surgical planning. This case report describes a novel technique combining the use of a three-dimensional (3D) printed surgical template for the immediate placement of an implant, with CAD/CAM technology to optimize hard and soft tissue healing after bone grafting with the use of a socket sealing abutment.

Techniques and recommendations for the inclusion of users with autism in the design of assistive technologies.

PubMed

Francis, Peter; Mellor, David; Firth, Lucy

2009-01-01

The increasing numbers of technology platforms offer opportunities to develop new visual assistive aids for people with autism. However, their involvement in the design of such aids is critical to their short-term uptake and longer term use. Using a three-round Delphi study involving seven Australian psychologists specializing in treating people with autism, the authors explored the utility of four techniques that might be implemented to involve users with autism in the design process. The authors found that individual users from the target group would be likely to respond differently to the techniques and that no technique was clearly better than any other. Recommendations for using these techniques to involve individuals with autism in the design of assistive technologies are suggested.

A review of computer aided interpretation technology for the evaluation of radiographs of aluminum welds

NASA Technical Reports Server (NTRS)

Lloyd, J. F., Sr.

1987-01-01

Industrial radiography is a well established, reliable means of providing nondestructive structural integrity information. The majority of industrial radiographs are interpreted by trained human eyes using transmitted light and various visual aids. Hundreds of miles of radiographic information are evaluated, documented and archived annually. In many instances, there are serious considerations in terms of interpreter fatigue, subjectivity and limited archival space. Quite often it is difficult to quickly retrieve radiographic information for further analysis or investigation. Methods of improving the quality and efficiency of the radiographic process are being explored, developed and incorporated whenever feasible. High resolution cameras, digital image processing, and mass digital data storage offer interesting possibilities for improving the industrial radiographic process. A review is presented of computer aided radiographic interpretation technology in terms of how it could be used to enhance the radiographic interpretation process in evaluating radiographs of aluminum welds.

Assistive Technology Provision Within the Navajo Nation

PubMed Central

Ripat, Jacquie D.

2014-01-01

In this study we explored the factors that affect assistive technology (AT) provision within the Navajo Nation using a qualitative approach to inquiry. Focus groups were held in which AT users discussed their awareness of AT and their need for, use of, and satisfaction with AT devices and services. Twenty-eight individuals who used wheelchairs, orthotics or prosthetics, hearing aids, communication aids, vision aids, and other AT participated in one of seven focus groups. Seven AT providers discussed the facilitators and barriers that affect AT provision. The findings revealed six themes common to both stakeholder groups and two additional themes for AT users. The central theme for AT users centered on (not) feeling understood; the central theme for AT providers revolved around the processes, activities, and roles the providers engaged in at times for different clients. Activities to increase awareness and to promote successful AT provision and satisfaction with AT devices were proposed. PMID:25147224

A new milling machine for computer-aided, in-office restorations.

PubMed

Kurbad, Andreas

Chairside computer-aided design/computer-aided manufacturing (CAD/CAM) technology requires an effective technical basis to obtain dental restorations with optimal marginal accuracy, esthetics, and longevity in as short a timeframe as possible. This article describes a compact, 5-axis milling machine based on an innovative milling technology (5XT - five-axis turn-milling technique), which is capable of achieving high-precision milling results within a very short processing time. Furthermore, the device's compact dimensioning and state-of-the-art mode of operation facilitate its use in the dental office. This model is also an option to be considered for use in smaller dental laboratories, especially as the open input format enables it to be quickly and simply integrated into digital processing systems already in use. The possibility of using ceramic and polymer materials with varying properties enables the manufacture of restorations covering all conceivable indications in the field of fixed dental prosthetics.

Intelligence Support to Urban Operations

DTIC Science & Technology

2015-12-01

Elevated systems and mass transit routes provide exposed lines of communications between city sectors while also offering points for good observation...Per capita income.  Percentage of population by economic sector (industry, service, other).  Percentage of population living in poverty...Percentage of population dependent on economic aid.  Type of aid.  Unemployment rate.  Underemployment rate.  Status of trade unions.  Whether

South African AIDS Orphans: Examining Assumptions around Vulnerability from the Perspective of Rural Children and Youth

ERIC Educational Resources Information Center

Henderson, Patricia C.

2006-01-01

The article examines assumptions circulating in development or interventionist discourse concerning the vulnerabilities of AIDS orphans in South Africa. Ongoing ethnographic research, begun in March 2003, with 31 rural children and youth between the ages of 14 and 22, in Magangangozi, KwaZulu-Natal, points to the ways in which global terms may…

Drawing AIDS:Tanzanian Teachers Picture the Pandemic: Implications for Re-Curriculation of Teacher Education Programmes

ERIC Educational Resources Information Center

Wood, Lesley; de Lange, Naydene; Mkumbo, Kitila

2013-01-01

In this article, we explain how we engaged teachers in creating their own representations of HIV and AIDS in Tanzania as a starting point for re-curriculation of the undergraduate teacher education programme. We employed a qualitative design, using visual methodologies, to encourage 29 in-service teachers to draw their perceptions about HIV and…

Technology-Mediated Interventions and Quality of Life for Persons Living with HIV/AIDS. A Systematic Review.

PubMed

Cho, Hwayoung; Iribarren, Sarah; Schnall, Rebecca

2017-04-12

As HIV/AIDS is considered a chronic disease; quality of life (QoL) has become an important focus for researchers and healthcare providers. Technology-mediated interventions have demonstrated improved clinical effectiveness in outcomes, such as viral suppression, for persons living with HIV/AIDS (PLWH). However, the evidence to support the impact of these interventions on QoL is lacking. The aim of this paper was to assess the impact of technology-mediated interventions on QoL and to identify the instruments used to measure the QoL of PLWH. For this review we followed the PRISMA guidelines. A literature search was conducted in PubMed, CINAHL, Cochrane, and EMBASE databases in April 2016. Inclusion criteria limited articles to those with technology-mediated interventions as compared to usual care; articles with the population defined as HIV-infected patients; and articles with QoL measured as a health outcome in randomized controlled trials. The Cochrane Collaboration Risk of Bias Tool was used to assess study quality. Of the 1,554 peer-reviewed articles returned in the searches, 10 met the inclusion criteria. This systematic review identified four types of technology-mediated interventions and two types of QoL instruments used to examine the impact of technology-mediated interventions on PLWH. Four studies of technology-mediated interventions resulted in improvement in QoL. Four studies considered QoL as a secondary outcome and resulted in a negative or neutral impact on QoL. Overall, four studies had a low risk of bias, one study had a moderate risk of bias, and the other five studies had a high risk of bias. The evidence to support the improvement of QoL using technology-mediated interventions is insufficient. This lack of research highlights the need for increased study of QoL as an outcome measure and the need for consistent measures to better understand the role of technology-mediated interventions in improving QoL for PLWH.

A Fuzzy Rule Based Decision Support System for Identifying Location of Water Harvesting Technologies in Rainfed Agricultural Regions

NASA Astrophysics Data System (ADS)

Chaubey, I.; Vema, V. K.; Sudheer, K.

2016-12-01

Site suitability evaluation of water conservation structures in water scarce rainfed agricultural areas consist of assessment of various landscape characteristics and various criterion. Many of these landscape characteristic attributes are conveyed through linguistic terms rather than precise numeric values. Fuzzy rule based system are capable of incorporating uncertainty and vagueness, when various decision making criteria expressed in linguistic terms are expressed as fuzzy rules. In this study a fuzzy rule based decision support system is developed, for optimal site selection of water harvesting technologies. Water conservation technologies like farm ponds, Check dams, Rock filled dams and percolation ponds aid in conserving water for irrigation and recharging aquifers and development of such a system will aid in improving the efficiency of the structures. Attributes and criteria involved in decision making are classified into different groups to estimate the suitability of the particular technology. The developed model is applied and tested on an Indian watershed. The input attributes are prepared in raster format in ArcGIS software and suitability of each raster cell is calculated and output is generated in the form of a thematic map showing the suitability of the cells pertaining to different technologies. The output of the developed model is compared against the already existing structures and results are satisfactory. This developed model will aid in improving the sustainability and efficiency of the watershed management programs aimed at enhancing in situ moisture content.

Assistive technology use and human rights enjoyment: a cross-sectional study in Bangladesh.

PubMed

Borg, Johan; Larsson, Stig; Ostergren, Per-Olof; Rahman, Asm Atiqur; Bari, Nazmul; Khan, Ahm Noman

2012-09-19

About half a billion people with disabilities in developing countries have limited access to assistive technology. The Convention on the Rights of persons with Disabilities requires governments to take measures to ensure provision of such technologies. To guide implementation of these measures there is a need for understanding health outcomes from a human rights perspective. The objective of this study was therefore to explore the relation between assistive technology use and enjoyment of human rights in a low-income country. Data was collected in eight districts of Bangladesh through interviews of people with hearing impairments using and not using hearings aids, and people with ambulatory impairments using and not using manual wheelchairs (N = 583). Using logistic regression, self-reported outcomes on standard of living, health, education, work, receiving information and movement were analyzed. The adjusted likelihood of reporting greater enjoyment of human rights was significantly higher among people using hearing aids compared to non-users for all outcomes except working status. Compared to non-users, users of wheelchairs reported a significantly higher adjusted likelihood of good ambulatory performance and a significantly lower adjusted likelihood of reporting a positive working status. Further analyses indicated that physical accessibility to working places and duration of wheelchair use had a statistically significant impact on the likelihood of reporting positive work outcomes. The findings support the notion that assistive technology use increases the likelihood of human rights enjoyment, particularly hearing aid use. Physical accessibility should always be addressed in wheelchair provision.

Objective and perceptual comparisons of two bluetooth hearing aid assistive devices.

PubMed

Clark, Jackie L; Pustejovsky, Carmen; Vanneste, Sven

2017-08-01

With the advent of Bluetooth technology, many of the assistive listening devices for hearing have become manufacturer specific, with little objective information about the performance provided. Thirty native English-speaking adults (mean age 29.8) with normal hearing were tested pseudo-randomly with two major hearing aid manufacturers' proprietary Bluetooth connectivity devices paired to the accompanying manufacturer's specific hearing aids. Sentence recognition performance was objectively measured for each system with signals transmitted via a land-line to the same iPhone in two conditions. There was a significant effect of participant's performance according to listening condition. There was no significant effect between device manufacturers according to listening condition, but there was a significant effect in participant's perception of "quality of sound". Despite differences in signal transmission for each devise, when worn by participants both the systems performed equally. In fact, participants expressed personal preferences for specific technology that was largely due to their perceived quality of sound while listening to recorded signals. While further research is necessary to investigate other measures of benefit for Bluetooth connectivity devices, preliminary data suggest that in order to ensure comfort and compatibility, not only should objective measures of the patient benefit be completed, but also assessing the patient's perception of benefit is equally important. Implications for Rehabilitation All professionals who work with individuals with hearing loss, become aware of the differences in the multiple choices for assistive technology readily available for hearing loss. With the ever growing dispensing of Bluetooth connectivity devices coupled to hearing aids, there is an increased burden to determine whether performance differences could exist between manufacturers. There is a growing need to investigate other measures of benefit for Bluetooth hearing aid connectivity devices that not only include objective measures, but also patient perception of benefit.

Using the Theory of Habitus to Move beyond the Study of Barriers to Technology Integration

ERIC Educational Resources Information Center

Belland, Brian R.

2009-01-01

The integration of technology by K-12 teachers was promoted to aid the shift to a more student-centered classroom (e.g., Roblyer, M. D., & Edwards, J. (2000). "Integrating educational technology into teaching" (2nd ed.). Upper Saddle River, NJ: Merrill). However, growth in the power of and access to technology in schools has not been accompanied…

Comparison of speech recognition with adaptive digital and FM remote microphone hearing assistance technology by listeners who use hearing aids.

PubMed

Thibodeau, Linda

2014-06-01

The purpose of this study was to compare the benefits of 3 types of remote microphone hearing assistance technology (HAT), adaptive digital broadband, adaptive frequency modulation (FM), and fixed FM, through objective and subjective measures of speech recognition in clinical and real-world settings. Participants included 11 adults, ages 16 to 78 years, with primarily moderate-to-severe bilateral hearing impairment (HI), who wore binaural behind-the-ear hearing aids; and 15 adults, ages 18 to 30 years, with normal hearing. Sentence recognition in quiet and in noise and subjective ratings were obtained in 3 conditions of wireless signal processing. Performance by the listeners with HI when using the adaptive digital technology was significantly better than that obtained with the FM technology, with the greatest benefits at the highest noise levels. The majority of listeners also preferred the digital technology when listening in a real-world noisy environment. The wireless technology allowed persons with HI to surpass persons with normal hearing in speech recognition in noise, with the greatest benefit occurring with adaptive digital technology. The use of adaptive digital technology combined with speechreading cues would allow persons with HI to engage in communication in environments that would have otherwise not been possible with traditional wireless technology.

Textbooks: Prospects for the Technological Era.

ERIC Educational Resources Information Center

Bettex, Maurice

1995-01-01

Examines why textbooks will survive despite competition from new technological inventions. Discusses opposition to textbooks through the development of audiovisual aids, multimedia, and interactivity; advantages of textbooks over other educational media; development of print media; five principles for developing textbook content; and future…

Investigation of air transportation technology at Princeton University, 1983

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1987-01-01

Progress is discussed for each of the following areas: voice recognition technology for flight control; guidance and control strategies for penetration of microbursts and wind shear; application of artificial intelligence in flight control systems; and computer-aided aircraft design.

21 CFR 874.3305 - Wireless air-conduction hearing aid.

Code of Federal Regulations, 2013 CFR

2013-04-01

...-amplifying device, intended to compensate for impaired hearing that incorporates wireless technology in its...: (1) Appropriate analysis/testing should validate electro magnetic compatibility (EMC) and safety of... technology functions; and (3) Labeling should specify appropriate instructions, warnings, and information...

Emerging Technologies in the Workplace.

ERIC Educational Resources Information Center

Ammon, Adelaide; Robertson, Lyle

1985-01-01

Presents survey responses of 100 Michigan firms regarding the use of advanced technologies, employment growth projections in skilled occupations, and views about community college education. Examines the impact of the introduction of office automation, telecommunications, computer-aided design, laser, quality control, materials management, and…

Determining the Navigational Aids Use on the Internet: The Information Technologies Teacher Candidates' Case

ERIC Educational Resources Information Center

Kuzu, Abdullah; Firat, Mehmet

2010-01-01

The Internet users who fail to cope with navigation may generally face various problems such as disorientation, distraction, low motivation and abandonment of information retrieval. Therefore, navigational aids are frequently used in today's Web browsers and Web sites to help users navigate on the Internet. However, it is asserted that…

"Different Strokes for Different Folks": Presenting EAD in Three UK Online Catalogues

ERIC Educational Resources Information Center

Hill, Amanda; Stockting, Bill; Higgins, Sarah

2005-01-01

This article discusses three different online services providing federated access to finding aids relating to archives found in a number of repositories: the Archives Hub, Access to Archives (A2A) and Navigational Aids for the History of Science, Technology and the Environment (NAHSTE). While the scale of the services is very different, a…

AIDS: An ICT Model for Integrating Teaching, Learning and Research in Technical University Education in Ghana

ERIC Educational Resources Information Center

Asabere, Nana; Togo, Gilbert; Acakpovi, Amevi; Torby, Wisdom; Ampadu, Kwame

2017-01-01

Information and Communication Technologies (ICT) has changed the way we communicate and carry out certain daily activities. Globally, ICT has become an essential means for disseminating information. Using Accra Technical University in Ghana as a case study, this paper proposes an ICT model called Awareness Incentives Demand and Support (AIDS). Our…

Technoscientific French Teaching Guide = Guide pour l'enseignement du Francais technoscientifique.

ERIC Educational Resources Information Center

Muller, Brigitte D.

This course guide aids university professors in doing research to develop a course in scientific and technical French. The course is intended to aid students in developing communicative skills in French in the context of science and technology. The course introduces students to the culture of France as well as to its industrial and technological…

77 FR 45592 - Notice of Submission for OMB Review; Federal Student Aid; Federal Perkins Loan Program Master...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... loans for eligible students to pay the costs of a student's attendance at an eligible institution of... DEPARTMENT OF EDUCATION Notice of Submission for OMB Review; Federal Student Aid; Federal Perkins... technology. Please note that written comments received in response to this notice will be considered public...

PEO Integration Acronym Book

DTIC Science & Technology

2011-02-01

Command CASE Computer Aided Software Engineering CASEVAC Casualty Evacuation CASTFOREM Combined Arms And Support Task Force Evaluation Model CAT Center For...Advanced Technologies CAT Civil Affairs Team CAT Combined Arms Training CAT Crew Integration CAT Crisis Action Team CATIA Computer-Aided Three...Dimensional Interactive Application CATOX Catalytic Oxidation CATS Combined Arms Training Strategy CATT Combined Arms Tactical Trainer CATT Computer

The impact of aided language stimulation on symbol comprehension and production in children with moderate cognitive disabilities.

PubMed

Harris, Michael D; Reichle, Joe

2004-05-01

Over the past decade, aided language stimulation has emerged as a strategy to promote both symbol comprehension and symbol production among individuals who use graphic mode communication systems. During aided language stimulation, an interventionist points to a graphic symbol while simultaneously producing the corresponding spoken word during natural communicative exchanges. The purpose of this study was to determine the impact of aided language stimulation on children with moderate cognitive disabilities. Three preschool children with moderate cognitive disabilities who were functionally nonspeaking participated in the investigation. The investigator implemented a multiple-probe design across symbol sets/activities. Elicited probes were used to determine whether the children increased their comprehension and production of graphic symbols. Results indicated that all 3 children displayed increased symbol comprehension and production following the implementation of aided language stimulation.

Hearing Aid Tester

NASA Technical Reports Server (NTRS)

1978-01-01

Hearing aids often develop malfunctions that are not detected by the wearer. This is particularly true when the wearers are school-age children. Studies of selected groups showed that from 30 to more than 50 percent of school children were not getting adequate benefit from their hearing aids because of unrecognized malfunctions, usually low or dead batteries. This can be serious because hearing impairment retards a child's educational progress. NASA technology incorporated in the Hearing Aid Malfunction Detection Unit (HAMDU), the device pictured, is expected to provide an effective countermeasure to the childrens' hearing aid problem. A patent license has been awarded to a minority-owned firm, Hopkins International Company, a subsidiary of H. H. Aerospace Design Co., Inc., Elmford, New York. The company plans early commercial availability of its version of the device.

Technology-Aided Interventions and Instruction for Adolescents with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Odom, Samuel L.; Thompson, Julie L.; Hedges, Susan; Boyd, Brian A.; Dykstra, Jessica R.; Duda, Michelle A.; Szidon, Kathrine L.; Smith, Leann E.; Bord, Aimee

2015-01-01

The use of technology in intervention and instruction for adolescents with autism spectrum disorder (ASD) is increasing at a striking rate. The purpose of this paper is to examine the research literature underlying the use of technology in interventions and instruction for high school students with ASD. In this paper, authors propose a theoretical…

A Curriculum Guide for Industrial Arts Plastic Technology. Intermediate and Secondary Level Students.

ERIC Educational Resources Information Center

Landers, Jack M.

This curriculum guide is an aid to administrators and instructors of industrial arts and vocational-technical school programs for the development of meaningful curriculum in plastics. The materials are intended for use at four levels: level I, exploring plastic technology; Level II, basic plastic technology; and levels III and IV, applied plastic…

From a social marketing perspective: a proposed customer relationship management technology transfer model

Treesearch

Delton Alderman; Kent Nakamoto; David Briberg

2007-01-01

Technology and knowledge transfer (TKT) is practiced for a plethora of causes, ranging from AIDS prevention to manufacturing competitiveness. The number of government, university, and association TKT efforts is exhausting and fraught with problems; we know anecdotally that the adoption of technology or knowledge is minimal across all contexts. There are a myriad of...

International behavioral responses to a health hazard: AIDS.

PubMed

Earickson, R J

1990-01-01

This paper expands on Jonathan Mann's third wave of the AIDS pandemic: the epidemic of economic, social, political, and cultural reaction and response to the HIV infection and to AIDS. This worldwide epidemic is a major economic challenge, especially in Third World countries, which can ill afford additional health care costs. AIDS is also a harbinger of political and cultural conflicts between and among nations, states, institutions, and people everywhere. It may ultimately transform law as radically as it has health care practices. In terms of management, it is possible to approach AIDS much as we do natural and technological hazards. The biology and epidemiology of AIDS require a coordinated attack, involving research on vaccines and drugs, modification of human behavior and education of populations to arrest the disease. All of these require money, of which the United States was the major contributor before the Reagan years. Funding to the United Nations and WHO has since languished, jeopardizing the AIDS efforts of those two organizations.

Using provider performance incentives to increase HIV testing and counseling services in Rwanda.

PubMed

de Walque, Damien; Gertler, Paul J; Bautista-Arredondo, Sergio; Kwan, Ada; Vermeersch, Christel; de Dieu Bizimana, Jean; Binagwaho, Agnès; Condo, Jeanine

2015-03-01

Paying for performance provides financial rewards to medical care providers for improvements in performance measured by utilization and quality of care indicators. In 2006, Rwanda began a pay for performance scheme to improve health services delivery, including HIV/AIDS services. Using a prospective quasi-experimental design, this study examines the scheme's impact on individual and couples HIV testing. We find a positive impact of pay for performance on HIV testing among married individuals (10.2 percentage points increase). Paying for performance also increased testing by both partners by 14.7 percentage point among discordant couples in which only one of the partners is an AIDS patient. Copyright © 2014. Published by Elsevier B.V.

The effects of supplemental online learning aids on student performance and student engagement in Medical Microbiology

NASA Astrophysics Data System (ADS)

Murray, Kimberly

The purpose of this study was to determine the effects of online learning aids on student performance and engagement. The thirty-five participants of the current study were students enrolled in two sections of a junior level Medical Microbiology laboratory. The experimental section was required to spend ten minutes each week on an online learning aid. The online program, StudyMate(TM), was used to present text and images in the form of flash cards, multiple choice questions, matching, and crossword puzzles. Both groups completed the Index of Learning Style survey, an initial engagement survey at the start of the course, and a final engagement survey at the end of the course. Statistical analysis showed no significant differences between the groups at the start of the course or after the course was completed for learning style, science grade point average, overall grade point average, initial engagement or final engagement. A moderate correlation was found between microbiology course and laboratory grades and a reflective learning style.

Navigational Aids: The Phenomenology of Transformative Learning

ERIC Educational Resources Information Center

Mälkki, Kaisu; Green, Larry

2014-01-01

Although the notion of transformative learning points to a desirable destination for educational endeavors, the difficulty in the journey is often neglected. Our intention is to map the experiential micro-processes involved in transformative learning such that the phenomenon is illuminated from a first-person rather than third-person point of…

Cooperative research and development opportunities with the National Cancer Institute

NASA Technical Reports Server (NTRS)

Sybert, Kathleen

1991-01-01

The Office of Technology Development (OTD) of the National Cancer Institute (NCI) is responsible for negotiating Cooperative Research and Development Agreements (CRADAs), whereby the knowledge resulting from NCI investigators' government-sponsored research is developed in collaboration with universities and/or industry into new products of importance for the diagnosis and treatment of cancer and acquired immunodeficiency syndrome (AIDS). The NCI has recently executed a unique 'clinical trials' CRADA and is developing a model agreement based upon it for the development and commercialization of products for the diagnosis and treatment of cancer and AIDS. NCI drug screening, preclinical testing, clinical trials, and AIDS program capabilities form the basis for this new technology development/technology transfer vehicle. NCI's extensive drug screening program and 'designer foods' program serve as potential sources of investigational new drugs (INDs) and cancer preventatives. Collaborations between NCI and pharmaceutical companies having the facilities, experience, and expertise necessary to develop INDs into approved drugs available to the public are being encouraged where the companies have proprietary rights to INDs, or where NCI has proprietary rights to INDs and invites companies to respond to a collaborator announcement published in the Federal Register. The joint efforts of the NCI and the chosen collaborator are designed to generate the data necessary to obtain pharmaceutic regulatory approval from the Food and Drug Administration (FDA) to market the drugs developed, and thereby make them available to health care providers for the diagnosis and treatment of cancer and AIDS.

Genome editing strategies: potential tools for eradicating HIV-1/AIDS

PubMed Central

Khalili, Kamel; Gordon, Jennifer; Cosentino, Laura; Hu, Wenhui

2015-01-01

Current therapy for controlling HIV-1 infection and preventing AIDS progression has profoundly decreased viral replication in cells susceptible to HIV-1 infection, but it does not eliminate the low level of viral replication in latently infected cells which contain integrated copies of HIV-1 proviral DNA. There is an urgent need for the development of HIV-1 genome eradication strategies that will lead to a permanent or “sterile” cure of HIV-1/AIDS. In the past few years, novel nuclease-initiated genome editing tools have been developing rapidly, including ZFNs, TALENs, and the CRISPR/Cas9 system. These surgical knives, which can excise any genome, provide a great opportunity to eradicate the HIV-1 genome by targeting highly conserved regions of the HIV-1 long terminal repeats or essential viral genes. Given the time consuming and costly engineering of target-specific ZFNs and TALENs, the RNA-guided endonuclease Cas9 technology has emerged as a simpler and more versatile technology to allow permanent removal of integrated HIV-1 proviral DNA in eukaryotic cells, and hopefully animal models or human patients. The major unmet challenges of this approach at present include inefficient nuclease gene delivery, potential off-target cleavage, and cell-specific genome targeting. Nanoparticle or lentivirus-mediated delivery of next generation Cas9 technologies including nickase or RNA-guided FokI nuclease (RFN) will further improve the potential for genome editing to become a promising approach for curing HIV-1/AIDS. PMID:25716921

Assessment of the fit of removable partial denture fabricated by computer-aided designing/computer aided manufacturing technology.

PubMed

Arafa, Khalid A O

2018-01-01

To assess the level of evidence that supports the quality of fit for removable partial denture (RPD) fabricated by computer-aided designing/computer aided manufacturing (CAD/CAM) and rapid prototyping (RP) technology. Methods: An electronic search was performed in Google Scholar, PubMed, and Cochrane library search engines, using Boolean operators. All articles published in English and published in the period from 1950 until April 2017 were eligible to be included in this review. The total number of articles contained the search terms in any part of the article (including titles, abstracts, or article texts) were screened, which resulted in 214 articles. After exclusion of irrelevant and duplicated articles, 12 papers were included in this systematic review.  Results: All the included studies were case reports, except one study, which was a case series that recruited 10 study participants. The visual and tactile examination in the cast or clinically in the patient's mouth was the most-used method for assessment of the fit of RPDs. From all included studies, only one has assessed the internal fit between RPDs and oral tissues using silicone registration material. The vast majority of included studies found that the fit of RPDs ranged from satisfactory to excellent fit. Conclusion: Despite the lack of clinical trials that provide strong evidence, the available evidence supported the claim of good fit of RPDs fabricated by new technologies using CAD/CAM.

Consumer e-health education in HIV/AIDS: a pilot study of a web-based video workshop

PubMed Central

O'Grady, Laura A

2006-01-01

Background Members of the HIV/AIDS community are known to use web-based tools to support learning about treatment issues. Initial research indicated components such as message forums or web-based documentation were effectively used by persons with HIV/AIDS. Video has also shown promise as a technology to aid consumer health education. However, no research has been published thus far investigating the impact of web-based environments combining these components in an educational workshop format. Methods In this qualitative study HIV/AIDS community members provided feedback on an integrated web-based consumer health education environment. Participants were recruited through organizations that serve the HIV/AIDS community located in Toronto, Canada. Demographics, data on Internet use, including messages exchanged in the study environment were collected. A group interview provided feedback on usability of the study environment, preferences for information formats, use of the message forum, and other sources for learning about treatment information. Results In this pilot study analysis of the posted messages did not demonstrate use for learning of the workshop content. Participants did not generally find the environment of value for learning about treatment information. However, participants did share how they were meeting these needs. It was indicated that a combination of resources are being used to find and discuss treatment information, including in-person sources. Conclusion More research on the ways in which treatment information needs are being met by HIV/AIDS community members and how technology fits in this process is necessary before investing large amounts of money into web-based interventions. Although this study had a limited number of participants, the findings were unexpected and, therefore, of interest to those who intend to implement online consumer health education initiatives or interventions. PMID:16504148

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2011 CFR

2011-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

34 CFR 461.12 - What must the State plan contain?

Code of Federal Regulations, 2010 CFR

2010-07-01

... schedules, auxiliary aids and services, convenient locations, adequate transportation, and child care... Technology Education Act; (10) Describe how the particular education needs of adult immigrants, the... and Applied Technology Education Act, the Job Training Partnership Act, the Rehabilitation Act of 1973...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2013 CFR

2013-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2014 CFR

2014-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

28 CFR 36.303 - Auxiliary aids and services.

Code of Federal Regulations, 2012 CFR

2012-07-01

...; videotext displays; accessible electronic and information technology; or other effective methods of making... electronic and information technology; or other effective methods of making visually delivered materials... circumstances. (4) A public accommodation shall not rely on a minor child to interpret or facilitate...

Evaluation of Adaptive Noise Management Technologies for School-Age Children with Hearing Loss.

PubMed

Wolfe, Jace; Duke, Mila; Schafer, Erin; Jones, Christine; Rakita, Lori

2017-05-01

Children with hearing loss experience significant difficulty understanding speech in noisy and reverberant situations. Adaptive noise management technologies, such as fully adaptive directional microphones and digital noise reduction, have the potential to improve communication in noise for children with hearing aids. However, there are no published studies evaluating the potential benefits children receive from the use of adaptive noise management technologies in simulated real-world environments as well as in daily situations. The objective of this study was to compare speech recognition, speech intelligibility ratings (SIRs), and sound preferences of children using hearing aids equipped with and without adaptive noise management technologies. A single-group, repeated measures design was used to evaluate performance differences obtained in four simulated environments. In each simulated environment, participants were tested in a basic listening program with minimal noise management features, a manual program designed for that scene, and the hearing instruments' adaptive operating system that steered hearing instrument parameterization based on the characteristics of the environment. Twelve children with mild to moderately severe sensorineural hearing loss. Speech recognition and SIRs were evaluated in three hearing aid programs with and without noise management technologies across two different test sessions and various listening environments. Also, the participants' perceptual hearing performance in daily real-world listening situations with two of the hearing aid programs was evaluated during a four- to six-week field trial that took place between the two laboratory sessions. On average, the use of adaptive noise management technology improved sentence recognition in noise for speech presented in front of the participant but resulted in a decrement in performance for signals arriving from behind when the participant was facing forward. However, the improvement with adaptive noise management exceeded the decrement obtained when the signal arrived from behind. Most participants reported better subjective SIRs when using adaptive noise management technologies, particularly when the signal of interest arrived from in front of the listener. In addition, most participants reported a preference for the technology with an automatically switching, adaptive directional microphone and adaptive noise reduction in real-world listening situations when compared to conventional, omnidirectional microphone use with minimal noise reduction processing. Use of the adaptive noise management technologies evaluated in this study improves school-age children's speech recognition in noise for signals arriving from the front. Although a small decrement in speech recognition in noise was observed for signals arriving from behind the listener, most participants reported a preference for use of noise management technology both when the signal arrived from in front and from behind the child. The results of this study suggest that adaptive noise management technologies should be considered for use with school-age children when listening in academic and social situations. American Academy of Audiology

Non-U.S. Citizen, Community College Students: Their Federal Student Aid Status, Gender, Achievement, and Persistence at an Emerging HSI

ERIC Educational Resources Information Center

Sanchez, Jafeth E.; Smith, Jeannette

2017-01-01

This study presents a quantitative, exploratory analysis of 535 students attending Truckee Meadows Community College in Northern Nevada who were eligible or ineligible for federal student aid and were non-U.S. citizens. Within a snapshot of the Fall 2015 through Fall 2016 semesters, we examined the variables of gender, grade point average (GPA),…

Material Teaching Aids: Enhancement Tool for Teaching Essay Writing in Secondary Schools

ERIC Educational Resources Information Center

Fidelia, Okonkwo Adaobi

2015-01-01

The purpose of this study is to investigate the use of material teaching aids as enhancement tool for teaching essay writing in secondary schools in Ebonyi State. A 4-point Likert-scale questionnaire was used as the instrument. A trial test was conducted and tested for reliability and a value of 0.75 was obtained from the test. The instrument was…

Sensitivity in Interactions between Hearing Mothers and their Toddlers with Hearing Loss: The Effect of Cochlear Implantation

ERIC Educational Resources Information Center

Bakar, Zaharah Abu; Brown, P. Margaret; Remine, Maria D.

2010-01-01

This study investigated the potential effects of cochlear implantation and age at implantation on maternal interactional sensitivity. Three groups of dyads were studied at two points over 1 year. The hearing aid (HA) group wore hearing aids throughout the study, the early cochlear implanted (ECI) group were implanted prior to 22 months of age, and…

Manufacturing engineering: Principles for optimization

NASA Astrophysics Data System (ADS)

Koenig, Daniel T.

Various subjects in the area of manufacturing engineering are addressed. The topics considered include: manufacturing engineering organization concepts and management techniques, factory capacity and loading techniques, capital equipment programs, machine tool and equipment selection and implementation, producibility engineering, methods, planning and work management, and process control engineering in job shops. Also discussed are: maintenance engineering, numerical control of machine tools, fundamentals of computer-aided design/computer-aided manufacture, computer-aided process planning and data collection, group technology basis for plant layout, environmental control and safety, and the Integrated Productivity Improvement Program.

Computers and terminals as an aid to international technology transfer

NASA Technical Reports Server (NTRS)

Sweeney, W. T.

1974-01-01

As technology transfer becomes more popular and proves to be an economical method for companies of all sizes to take advantage of a tremendous amount of new and available technology from sources all over the world, the introduction of computers and terminals into the international technology transfer process is proving to be a successful method for companies to take part in this beneficial approach to new business opportunities.

The Quantum Leap in Special Education: New Information and Communication Technologies. Their Impact upon Educational Opportunities for Disabled People, Focussing on How Integration in the Ordinary Educational System Can Be Facilitated. Draft Document.

ERIC Educational Resources Information Center

Kristiansen, Rolf

This paper suggests means of merging educational ideas with new information and communication technologies to aid individuals with disabilities. New technologies discussed include microtechnology and integrated circuits, high speed processing and retrieval of information, and light-weight equipment, among others. New technologies can be used as…

Manned space station environmental control and life support system computer-aided technology assessment program

NASA Technical Reports Server (NTRS)

Hall, J. B., Jr.; Pickett, S. J.; Sage, K. H.

1984-01-01

A computer program for assessing manned space station environmental control and life support systems technology is described. The methodology, mission model parameters, evaluation criteria, and data base for 17 candidate technologies for providing metabolic oxygen and water to the crew are discussed. Examples are presented which demonstrate the capability of the program to evaluate candidate technology options for evolving space station requirements.

All-Arthroscopic Autologous Matrix-Induced Chondrogenesis-Aided Repair of a Patellar Cartilage Defect Using Dry Arthroscopy and a Retraction System.

PubMed

Sadlik, Boguslaw; Puszkarz, Mariusz; Kosmalska, Lidia; Wiewiorski, Martin

2017-11-01

The technique of all-arthroscopic autologous matrix-induced chondrogenesis (AMIC)-aided repair of patellar cartilage lesions using a retraction system and dry arthroscopy has been recently described. We report the first clinical and radiological data at a short-term follow-up. Twelve patients underwent AMIC-aided cartilage repair for a patellar lesion. All steps of the procedure were performed arthroscopically, which include the use of an intra-articularly placed retraction plate for distraction of the patellofemoral joint and evacuation of saline solution for collagen matrix insertion and fixation. Clinical assessment performed before surgery and at a mean follow-up time of 38 months (range: 24-70) included the following scores: Knee Injury and Osteoarthritis Outcome Score (KOOS), International Knee Documentation Committee (IKDC), and visual analog scale (VAS). Magnetic resonance imaging was performed at the follow-up examination, including the magnetic resonance observation of cartilage repair tissue (MOCART) score. The mean KOOS and IKDC scores increased significantly ( p  < 0.01) from 50.3 and 37.4 points preoperatively to 90.1 and 79.4 postoperatively. The VAS score decreased from 7.8 to 2.3 points. Mean MOCART score at follow-up was 58.3 points. Cartilage repair of patellar lesions aided by a retraction system in a dry arthroscopy setup is a promising approach. Further studies are needed to evaluate this procedure and compare it to existing matrix implantation techniques. The level of evidence for the study is 4 (case series). Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Powerpoint: An Overused Technology Deserving of Criticism, but Indispensable

ERIC Educational Resources Information Center

Hopper, Keith B.; Waugh, Jonathan B.

2014-01-01

PowerPoint is roundly reviled and ridiculed, yet this technology enjoys universal popularity. This article reviews the criticisms of PowerPoint and its peer technologies, describes its affordances and advantages, and suggests innovative PowerPoint applications in instruction. Beyond garden-variety applications of PowerPoint, it may also be used to…

Information and communication technologies for adherence to antiretroviral treatment in adults with HIV/AIDS.

PubMed

Lima, Ivana Cristina Vieira de; Galvão, Marli Teresinha Gimeniz; Alexandre, Herta de Oliveira; Lima, Francisca Elisângela Teixeira; Araújo, Thelma Leite de

2016-08-01

Information and communication technologies support interventions directed at the prevention of HIV transmission and patient monitoring by promoting improved accessibility and quality of care. To evaluate the efficacy of information and communication technologies in the adherence to antiretroviral treatment in adults with HIV/AIDS. Systematic review conducted from March to May of 2015 in three databases-the Cumulative Index to Nursing and Allied Health Literature (CINAHL); the Latin-American and Caribbean Literature in Health Sciences (LILACS/BIREME) and SCOPUS; and the Cochrane library and the Medical Literature Analysis and Retrieval System Online portal (MEDLINE/PubMed). The sample consisted of nine randomized clinical trials based on the use of information and communication technologies for adherence to antiretroviral treatment in adults with HIV/AIDS. Three studies analysed the use of a short message service - SMS - two phone calls, two alarm devices, one web-enabled Hand-held device and one web electronic intervention. Improvements in the levels of adherence in the group subjected to the intervention were identified in seven studies. The phone was the type of information and communication technology with proven efficacy with respect to adherence. It was used to make calls, as well as to send alert messages and reminders about taking medications. Pagers were not considered to be effective regarding adherence to antiretroviral therapy. The integrated use of information and communication technologies with standard care promotes increased access to care, strengthening the relationship between patients and health services, with the possibility of mitigating the difficulties experienced by people with HIV in achieving optimal levels of adherence to drug therapy. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Access and Quality of HIV-Related Point-of-Care Diagnostic Testing in Global Health Programs.

PubMed

Fonjungo, Peter N; Boeras, Debrah I; Zeh, Clement; Alexander, Heather; Parekh, Bharat S; Nkengasong, John N

2016-02-01

Access to point-of-care testing (POCT) improves patient care, especially in resource-limited settings where laboratory infrastructure is poor and the bulk of the population lives in rural settings. However, because of challenges in rolling out the technology and weak quality assurance measures, the promise of human immunodeficiency virus (HIV)-related POCT in resource-limited settings has not been fully exploited to improve patient care and impact public health. Because of these challenges, the Joint United Nations Programme on HIV/AIDS (UNAIDS), in partnership with other organizations, recently launched the Diagnostics Access Initiative. Expanding HIV programs, including the "test and treat" strategies and the newly established UNAIDS 90-90-90 targets, will require increased access to reliable and accurate POCT results. In this review, we examine various components that could improve access and uptake of quality-assured POC tests to ensure coverage and public health impact. These components include evaluation, policy, regulation, and innovative approaches to strengthen the quality of POCT. © The Author 2015. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

The role of community health workers in supporting South Africa's HIV/ AIDS treatment programme.

PubMed

Mottiar, Shauna; Lodge, Tom

2018-03-01

Community health workers deployed around South Africa's primary health care clinics, supply indispensable support for the world's largest HIV/AIDS treatment programme. Interviews with these workers illuminated the contribution they make to anti-retroviral treatment (ART) of HIV/AIDS patients and the motivations that sustain their engagement. Their testimony highlights points of stress in the programme and supplies insights into the quality of its implementation. Finally, the paper addresses issues about the sustainability of a programme that depends on a group of workers who are not yet fully incorporated into the public sector.

A systematic review of near real-time and point-of-care clinical decision support in anesthesia information management systems.

PubMed

Simpao, Allan F; Tan, Jonathan M; Lingappan, Arul M; Gálvez, Jorge A; Morgan, Sherry E; Krall, Michael A

2017-10-01

Anesthesia information management systems (AIMS) are sophisticated hardware and software technology solutions that can provide electronic feedback to anesthesia providers. This feedback can be tailored to provide clinical decision support (CDS) to aid clinicians with patient care processes, documentation compliance, and resource utilization. We conducted a systematic review of peer-reviewed articles on near real-time and point-of-care CDS within AIMS using the Preferred Reporting Items for Systematic Review and Meta-Analysis Protocols. Studies were identified by searches of the electronic databases Medline and EMBASE. Two reviewers screened studies based on title, abstract, and full text. Studies that were similar in intervention and desired outcome were grouped into CDS categories. Three reviewers graded the evidence within each category. The final analysis included 25 articles on CDS as implemented within AIMS. CDS categories included perioperative antibiotic prophylaxis, post-operative nausea and vomiting prophylaxis, vital sign monitors and alarms, glucose management, blood pressure management, ventilator management, clinical documentation, and resource utilization. Of these categories, the reviewers graded perioperative antibiotic prophylaxis and clinical documentation as having strong evidence per the peer reviewed literature. There is strong evidence for the inclusion of near real-time and point-of-care CDS in AIMS to enhance compliance with perioperative antibiotic prophylaxis and clinical documentation. Additional research is needed in many other areas of AIMS-based CDS.

[Health challenges as the second millenium is ending. Conceptual epidemiology, social pathology, medicine and professional ethics].

PubMed

Velasco Suárez, M

1990-01-01

In this article it is outlined the work of doctor Bustamante in fighting against diseases such as yellow fever, typhus, malaria, and smallpox; and the development and impel that this professional gave to preventive and social medicine is pointed out. It is established that health care professionals currently must not only highly studied and prepared, as they should manage all features related with public health, but also change-men-and-women who are capable to influence future generations, which will be the responsible in relocating men at the equilibrium point concerned to their health. Said equilibrium point is not only modified in its biopsychosocial aspect, but also its essence is deeply affected. This paper is a warning to physicians to fight together in response to humanity, that has set their confidence in them, as the current problem of drugs and dependence to drugs unhinges everything wholeness. To doctor Suarez is intolerable that, in spite of technological advances in the world, yet exist deaths caused by pneumonia or diarrhea. The hazards of the century are frightened: nuclear war and AIDS; but the characteristics that have distinguished human species and allowed its survival and superation are trusted: mental activity, ability of judgement, and consciousness; which are valuable for a deep philosophic discussion that allows us to continue our advance. An enumeration of the medicine achievements in this century is made.

Educational Applications for Blind and Partially Sighted Pupils Based on Speech Technologies for Serbian.

PubMed

Lučić, Branko; Ostrogonac, Stevan; Vujnović Sedlar, Nataša; Sečujski, Milan

2015-01-01

The inclusion of persons with disabilities has always represented an important issue. Advancements within the field of computer science have enabled the development of different types of aids, which have significantly improved the quality of life of the disabled. However, for some disabilities, such as visual impairment, the purpose of these aids is to establish an alternative communication channel and thus overcome the user's disability. Speech technologies play the crucial role in this process. This paper presents the ongoing efforts to create a set of educational applications based on speech technologies for Serbian for the early stages of education of blind and partially sighted children. Two educational applications dealing with memory exercises and comprehension of geometrical shapes are presented, along with the initial tests results obtained from research including visually impaired pupils.

Educational Applications for Blind and Partially Sighted Pupils Based on Speech Technologies for Serbian

PubMed Central

Lučić, Branko; Ostrogonac, Stevan; Vujnović Sedlar, Nataša; Sečujski, Milan

2015-01-01

The inclusion of persons with disabilities has always represented an important issue. Advancements within the field of computer science have enabled the development of different types of aids, which have significantly improved the quality of life of the disabled. However, for some disabilities, such as visual impairment, the purpose of these aids is to establish an alternative communication channel and thus overcome the user's disability. Speech technologies play the crucial role in this process. This paper presents the ongoing efforts to create a set of educational applications based on speech technologies for Serbian for the early stages of education of blind and partially sighted children. Two educational applications dealing with memory exercises and comprehension of geometrical shapes are presented, along with the initial tests results obtained from research including visually impaired pupils. PMID:26171422

Letter regarding 'Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics' by Patrizi et al. and research reproducibility.

PubMed

2017-04-01

The reporting of research in a manner that allows reproduction in subsequent investigations is important for scientific progress. Several details of the recent study by Patrizi et al., 'Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics', are absent from the published manuscript and make reproduction of findings impossible. As new and complex technologies with great promise for ergonomics develop, new but surmountable challenges for reporting investigations using these technologies in a reproducible manner arise. Practitioner Summary: As with traditional methods, scientific reporting of new and complex ergonomics technologies should be performed in a manner that allows reproduction in subsequent investigations and supports scientific advancement.

Computer Aided Teaching in Photogrammetry, Remote Sensing, and Geomatics - A Status Review

NASA Astrophysics Data System (ADS)

Vyas, A.; Koenig, G.

2014-04-01

Education and training play vital role in the utilization of the technology. Shared and coordinated knowledge that geospatial technology and GIS deliver provides a deeper understanding of our present and will also help to better understand our future development. But it is not enough to explain new technological developments during congresses or workshops; it is also necessary to promote these new ideas and to distribute the knowledge by applying new learning strategies. This paper will review the status of computer aided teaching advances during the last decade, with a particular emphasis on photogrammetry, remote sensing, and geomatics. Some best practise examples will be presented featuring prominently recent Massive Open Online Courses (MOOCs) related to our fields. The consideration of mainly free online learning resources will include a commentary on quality and perceived effectiveness.

Availability of Japanese subsidies for international telemedicine projects.

PubMed

Nakajima, I; Tsurumi, T; Sawada, Y; Juzoji, H; Ogushi, Y

1999-10-01

In this article, the authors report the methods for obtaining subsidies for overseas telemedicine projects from Japanese sources based on their own personal experiences. The Japanese Government is already subsidizing such specialized NGOs (Non-Governmental Organizations) as the Telemedicine Society of Japan and Basic Human Needs and, Japanese trading companies are also hiring telemedicine experts. Prospective methods for obtaining subsidies are outlined as under the following headings: Assistance without compensation, Technology transfer, Grass-roots grant assistance, the Telecommunications Advancement Organization, Postal Savings for International Voluntary Aid, Venture business development funds provided by the Ministry of International Trade and Industry, Mission demonstration satellites by the National Space Development Agency of Japan, the Sasakawa Pacific Island Nations Fund, and International Communications Foundation. Key points of the applications are noted under (1) Degree of contribution to local residents, (2) Significance of project continuation and (3) Novelty and economic impact.

Directory of aerospace safety specialized information sources

NASA Technical Reports Server (NTRS)

Fullerton, E. A.; Rubens, L. S.

1973-01-01

A directory is presented to make available to the aerospace safety community a handbook of organizations and experts in specific, well-defined areas of safety technology. It is designed for the safety specialist as an aid for locating both information sources and individual points of contact (experts) in engineering related fields. The file covers sources of data in aerospace design, tests, as well as information in hazard and failure cause identification, accident analysis, materials characteristics, and other related subject areas. These 171 organizations and their staff members, hopefully, should provide technical information in the form of documentation, data and consulting expertise. These will be sources that have assembled and collated their information, so that it will be useful in the solution of engineering problems. One of the goals of the project in the United States that have and are willing to share data of value to the aerospace safety community.

Assessing hydrometeorological impacts with terrestrial and aerial Lidar data in Monterrey, México

NASA Astrophysics Data System (ADS)

Yepez Rincon, F.; Lozano Garcia, D.; Vela Coiffier, P.; Rivera Rivera, L.

2013-10-01

Light Detection Ranging (Lidar) is an efficient tool to gather points reflected from a terrain and store them in a xyz coordinate system, allowing the generation of 3D data sets to manage geoinformation. Translation of these coordinates, from an arbitrary system into a geographical base, makes data feasible and useful to calculate volumes and define topographic characteristics at different scales. Lidar technological advancement in topographic mapping enables the generation of highly accurate and densely sampled elevation models, which are in high demand by many industries like construction, mining and forestry. This study merges terrestrial and aerial Lidar data to evaluate the effectiveness of these tools assessing volumetric changes after a hurricane event of riverbeds and scour bridges The resulted information could be an optimal approach to improve hydrological and hydraulic models, to aid authorities in proper to decision making in construction, urban planning, and homeland security.

Wind Turbine Contingency Control Through Generator De-Rating

NASA Technical Reports Server (NTRS)

Frost, Susan; Goebel, Kai; Balas, Mark

2013-01-01

Maximizing turbine up-time and reducing maintenance costs are key technology drivers for wind turbine operators. Components within wind turbines are subject to considerable stresses due to unpredictable environmental conditions resulting from rapidly changing local dynamics. In that context, systems health management has the aim to assess the state-of-health of components within a wind turbine, to estimate remaining life, and to aid in autonomous decision-making to minimize damage to the turbine. Advanced contingency control is one way to enable autonomous decision-making by providing the mechanism to enable safe and efficient turbine operation. The work reported herein explores the integration of condition monitoring of wind turbines with contingency control to balance the trade-offs between maintaining system health and energy capture. The contingency control involves de-rating the generator operating point to achieve reduced loads on the wind turbine. Results are demonstrated using a high fidelity simulator of a utility-scale wind turbine.

Wearable ear EEG for brain interfacing

NASA Astrophysics Data System (ADS)

Schroeder, Eric D.; Walker, Nicholas; Danko, Amanda S.

2017-02-01

Brain-computer interfaces (BCIs) measuring electrical activity via electroencephalogram (EEG) have evolved beyond clinical applications to become wireless consumer products. Typically marketed for meditation and neu- rotherapy, these devices are limited in scope and currently too obtrusive to be a ubiquitous wearable. Stemming from recent advancements made in hearing aid technology, wearables have been shrinking to the point that the necessary sensors, circuitry, and batteries can be fit into a small in-ear wearable device. In this work, an ear-EEG device is created with a novel system for artifact removal and signal interpretation. The small, compact, cost-effective, and discreet device is demonstrated against existing consumer electronics in this space for its signal quality, comfort, and usability. A custom mobile application is developed to process raw EEG from each device and display interpreted data to the user. Artifact removal and signal classification is accomplished via a combination of support matrix machines (SMMs) and soft thresholding of relevant statistical properties.

Improving clinical trials in the critically ill.

PubMed

Angus, Derek C; Mira, Jean-Paul; Vincent, Jean-Louis

2010-02-01

To propose ways in which clinical trials in intensive care can be improved. An international roundtable conference was convened focused on improvement in three broad areas: translation of new knowledge from bench to bedside; design and conduct of clinical trials; and clinical trial infrastructure and environment. The roundtable recommendations were: improvement in clinical trials is a multistep process from better preclinical studies to better clinical trial methodology; new technologies should be used to improve models of critical illness; diseasomes and theragnostics will aid inpatient population selection and more appropriate targeting of interventions; broader study end points should include morbidity as well as mortality; more multicenter studies should be conducted by national and international networks or clinical trials groups; and better collaboration is needed with the industry. There was broad agreement among the roundtable participants regarding a number of explicit opportunities for the improvement of clinical trials in critical care.

Global issues from an African point of view. 7th International Women and Health Meeting in Uganda.

PubMed

Shallat, L

1993-01-01

The seventh International Women and Health Meeting (IWHM) was held in Kampala, Uganda, during September 12-17, 1993. The purpose of the meeting was to devise strategies to confront such issues as the impact of economic policies on women's health, the implementation of reproductive rights, population control and policies, contraceptive technologies, AIDS, and sexual abuse and violence. In addition to these topics, discussion centered on interaction with the upcoming 1994 International Conference on Population and Development. Some participants were frustrated, however, by the procedural problems that prevented creation of a cohesive position paper and left important strategic questions unanswered. Women from Latin America and the Caribbean were kept from full participation by the lack of a Spanish translator but nevertheless held an information session on regional developments in abortion reform and population policy. These women were also successful in their bid to host the eighth IWHM in Brazil in 1996.

Automated Parameter Studies Using a Cartesian Method

NASA Technical Reports Server (NTRS)

Murman, Scott M.; Aftosimis, Michael J.; Nemec, Marian

2004-01-01

Computational Fluid Dynamics (CFD) is now routinely used to analyze isolated points in a design space by performing steady-state computations at fixed flight conditions (Mach number, angle of attack, sideslip), for a fixed geometric configuration of interest. This "point analysis" provides detailed information about the flowfield, which aides an engineer in understanding, or correcting, a design. A point analysis is typically performed using high fidelity methods at a handful of critical design points, e.g. a cruise or landing configuration, or a sample of points along a flight trajectory.

Computer-Aided Transcription in the Courts. Executive Summary. National Center Publication No. R-0058.

ERIC Educational Resources Information Center

National Center for State Courts, Williamsburg, VA.

This report summarizes the findings of the Computer-Aided Transcription (CAT) Project, which conducted a 14-month study of the technology and use of computer systems for translating into English the shorthand notes taken by court reporters on stenotype machines. Included are the state of the art of CAT at the end of 1980 and anticipated future…

Influence of Computer-Aided Assessment on Ways of Working with Mathematics

ERIC Educational Resources Information Center

Rønning, Frode

2017-01-01

This paper is based on an on-going project for modernizing the basic education in mathematics for engineers at the Norwegian University of Science and Technology. One of the components in the project is using a computer-aided assessment system (Maple T.A.) for handling students' weekly hand-ins. Successful completion of a certain number of problem…

The Role of Computer-Aided Instruction in Science Courses and the Relevant Misconceptions of Pre-Service Teachers

ERIC Educational Resources Information Center

Aksakalli, Ayhan; Turgut, Umit; Salar, Riza

2016-01-01

This research aims to investigate the ways in which pre-service physics teachers interact with computers, which, as an indispensable means of today's technology, are of major value in education and training, and to identify any misconceptions said teachers may have about computer-aided instruction. As part of the study, computer-based physics…

Cognitive and Language Acquisition in Typical and Aided Language Learning: A Review of Recent Evidence from an Aided Communication Perspective

ERIC Educational Resources Information Center

Murray, Janice; Goldbart, Juliet

2009-01-01

Augmentative and alternative communication (AAC) is a discipline that has seen recent developments as a consequence of the worldwide technological revolution. Children with complex communication needs, who benefit from such systems, are now afforded an opportunity to develop independent communication skills. The aim of this paper is to review…

How to perform first aid.

PubMed

Gloster, Annabella Satu; Johnson, Phillip John

2016-01-13

RATIONALE AND KEY POINTS: This article aims to help nurses to perform first aid in a safe, effective and patient-centred manner. First aid comprises a series of simple, potentially life-saving steps that an individual can perform with minimal equipment. Although it is not a legal requirement to respond to an emergency situation outside of work, nurses have a professional duty to respond and provide care within the limits of their competency. First aid is the provision of immediate medical assistance to an ill or injured person until definitive medical treatment can be accessed. First aid can save lives and it is essential that nurses understand the basic principles. REFLECTIVE ACTIVITY: Clinical skills articles can help update your practice and ensure it remains evidence based. Apply this article to your practice. Reflect on and write a short account of: 1. Your skill in performing first aid and any areas where you may need to extend your knowledge. 2. How reading this article will change your practice. Subscribers can upload their reflective accounts at: rcni.com/portfolio .

Recent advances in the reconstruction of cranio-maxillofacial defects using computer-aided design/computer-aided manufacturing.

PubMed

Oh, Ji-Hyeon

2018-12-01

With the development of computer-aided design/computer-aided manufacturing (CAD/CAM) technology, it has been possible to reconstruct the cranio-maxillofacial defect with more accurate preoperative planning, precise patient-specific implants (PSIs), and shorter operation times. The manufacturing processes include subtractive manufacturing and additive manufacturing and should be selected in consideration of the material type, available technology, post-processing, accuracy, lead time, properties, and surface quality. Materials such as titanium, polyethylene, polyetheretherketone (PEEK), hydroxyapatite (HA), poly-DL-lactic acid (PDLLA), polylactide-co-glycolide acid (PLGA), and calcium phosphate are used. Design methods for the reconstruction of cranio-maxillofacial defects include the use of a pre-operative model printed with pre-operative data, printing a cutting guide or template after virtual surgery, a model after virtual surgery printed with reconstructed data using a mirror image, and manufacturing PSIs by directly obtaining PSI data after reconstruction using a mirror image. By selecting the appropriate design method, manufacturing process, and implant material according to the case, it is possible to obtain a more accurate surgical procedure, reduced operation time, the prevention of various complications that can occur using the traditional method, and predictive results compared to the traditional method.

Optimizing Functional Outcomes in Mandibular Condyle Reconstruction With the Free Fibula Flap Using Computer-Aided Design and Manufacturing Technology.

PubMed

Lee, Z-Hye; Avraham, Tomer; Monaco, Casian; Patel, Ashish A; Hirsch, David L; Levine, Jamie P

2018-05-01

Mandibular defects involving the condyle represent a complex reconstructive challenge for restoring proper function of the temporomandibular joint (TMJ) because it requires precise bone graft alignment for full restoration of joint function. The use of computer-aided design and manufacturing (CAD/CAM) technology can aid in accurate reconstruction of mandibular condyle defects with a vascularized free fibula flap without the need for additional adjuncts. The purpose of this study was to analyze clinical and functional outcomes after reconstruction of mandibular condyle defects using only a free fibula graft with the help of virtual surgery techniques. A retrospective review was performed to identify all patients who underwent mandibular reconstruction with only a free fibula flap without any TMJ adjuncts after a total condylectomy. Three-dimensional modeling software was used to plan and execute reconstruction for all patients. From 2009 through 2014, 14 patients underwent reconstruction of mandibular defects involving the condyle with the aid of virtual surgery technology. The average age was 38.7 years (range, 11 to 77 yr). The average follow-up period was 2.6 years (range, 0.8 to 4.2 yr). Flap survival was 100% (N = 14). All patients reported improved facial symmetry, adequate jaw opening, and normal dental occlusion. In addition, they achieved good functional outcomes, including normal intelligible speech and the tolerance of a regular diet with solid foods. Maximal interincisal opening range for all patients was 25 to 38 mm with no lateral deviation or subjective joint pain. No patient had progressive joint hypomobility or condylar migration. One patient had ankylosis, which required release. TMJ reconstruction poses considerable challenges in bone graft alignment for full restoration of joint function. The use of CAD/CAM technology can aid in accurate reconstruction of mandibular condyle defects with a vascularized free fibula flap through precise planning and intraoperative manipulation with optimal functional outcomes. Copyright © 2017 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Effect of T4 count and cofactors on the incidence of AIDS in homosexual men infected with human immunodeficiency virus.

PubMed

Goedert, J J; Biggar, R J; Melbye, M; Mann, D L; Wilson, S; Gail, M H; Grossman, R J; DiGioia, R A; Sanchez, W C; Weiss, S H

1987-01-16

We prospectively evaluated potential markers and cofactors for the acquired immunodeficiency syndrome (AIDS) in 86 homosexual men who were seropositive for human immunodeficiency virus antibodies. During three years of follow-up, 19 men developed AIDS. Risk of AIDS was clearly predicted by the total number of circulating OKT4-positive lymphocytes (T4 count) at enrollment, while the corresponding T8 count was unrelated to subsequent AIDS development. Subjects in Manhattan had a higher risk of Kaposi's sarcoma than did subjects in Washington, DC, and the risk of AIDS tended to increase with numerous homosexual partners. Several of 40 potential cofactors defined ex post facto, including receptive fellatio, enemas, methaqualone use, and high levels of antibody to hepatitis B surface antigen, appeared to be associated with Kaposi's sarcoma but not with Pneumocystis pneumonia. Our data suggest that potent cofactors for Pneumocystis pneumonia were not prominent, pointing to the need for effective drug therapies, particularly to reduce the high AIDS risk of persons with human immunodeficiency virus infection and low T4 counts.

AID Biology: A pathological and clinical perspective.

PubMed

Choudhary, Meenal; Tamrakar, Anubhav; Singh, Amit Kumar; Jain, Monika; Jaiswal, Ankit; Kodgire, Prashant

2018-01-02

Activation-induced cytidine deaminase (AID), primarily expressed in activated mature B lymphocytes in germinal centers, is the key factor in adaptive immune response against foreign antigens. AID is responsible for producing high-affinity and high-specificity antibodies against an infectious agent, through the physiological DNA alteration processes of antibody genes by somatic hypermutation (SHM) and class-switch recombination (CSR) and functions by deaminating deoxycytidines (dC) to deoxyuridines (dU), thereby introducing point mutations and double-stranded chromosomal breaks (DSBs). The beneficial physiological role of AID in antibody diversification is outweighed by its detrimental role in the genesis of several chronic immune diseases, under non-physiological conditions. This review offers a comprehensive and better understanding of AID biology and its pathological aspects, as well as addresses the challenges involved in AID-related cancer therapeutics, based on various recent advances and evidence available in the literature till date. In this article, we discuss ways through which our interpretation of AID biology may reflect upon novel clinical insights, which could be successfully translated into designing clinical trials and improving patient prognosis and disease management.

The Degathering of Society: Implications for Technology and Educators.

ERIC Educational Resources Information Center

Martorella, Peter H.

1996-01-01

Aided by developing technologies, society is moving from its traditional "gathering" pattern (collecting individuals for work, recreation, voting, medical care, and shopping) to a "degathering," decentralized pattern. Alternative schooling formats, such as home schooling, are a likely consequence. Educators who fail to restructure their…

Crop Management to Cope with Global Change: A Systems Perspective Aided by Information Technologies

USDA-ARS?s Scientific Manuscript database

Optimizing crop management must consider the dynamic interaction of abiotic and biotic factors within the context of economic, environmental, sociological, and policy constraints. A wide array of information technologies exists to assist producers, consultants, scientists, agribusiness, action agenc...

Computerized Manufacturing Automation. Employment, Education, and the Workplace. Summary.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

The application of programmable automation (PA) offers new opportunities to enhance and streamline manufacturing processes. Five PA technologies are examined in this report: computer-aided design, robots, numerically controlled machine tools, flexible manufacturing systems, and computer-integrated manufacturing. Each technology is in a relatively…

45 CFR 1624.3 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., speaking, breathing, learning, and working; (iii) Has a record of such impairment means has a history of... program. (e) Auxiliary aids and/or other assistive technologies means any item, piece of equipment, or.../or other assistive technologies include, but are not limited to, brailled and taped material...