Tech-Prep Competency Profiles within the Health Technologies Cluster.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains competency profiles for Ohio tech prep courses in the following 12 health technologies occupations: radiographer, respiratory care therapist, occupational therapy assistant, physical therapist assistant, registered nurse (associate degree), pharmacy technologist, medical laboratory technician, histotechnologist, emergency…

42 CFR 486.104 - Condition for coverage: Qualifications, orientation and health of technical personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), or (4) of this section: (1) Successful completion of a program of formal training in X-ray technology in a school approved by the Joint Review Committee on Education in Radiologic Technology (JRCERT), or have earned a bachelor's or associate degree in radiologic technology from an accredited college or...

A Survey of Computer Use in Associate Degree Programs in Engineering Technology.

ERIC Educational Resources Information Center

Cunningham, Pearley

As part of its annual program review process, the Department of Engineering Technology at the Community College of Allegheny County, in Pennsylvania, conducted a study of computer usage in community college engineering technology programs across the nation. Specifically, the study sought to determine the types of software, Internet access, average…

Factors Impacting Adult Learner Achievement in a Technology Certificate Program on Computer Networks

ERIC Educational Resources Information Center

Delialioglu, Omer; Cakir, Hasan; Bichelmeyer, Barbara A.; Dennis, Alan R.; Duffy, Thomas M.

2010-01-01

This study investigates the factors impacting the achievement of adult learners in a technology certificate program on computer networks. We studied 2442 participants in 256 institutions. The participants were older than age 18 and were enrolled in the Cisco Certified Network Associate (CCNA) technology training program as "non-degree" or…

Avionics Maintenance Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide presents the avionics maintenance technology curriculum for technical institutes in Georgia. The general information section contains the following for both the diploma program and the associate degree program: purpose and objectives; program description, including admissions, typical job titles, and accreditation and…

Engineering Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 397 competencies, grouped into 58 units, for tech prep programs in the engineering technologies cluster. The competencies were developed through collaboration of Ohio business, industry, and labor representatives and secondary and associate degree educators. The competencies are rated either "essential" (necessary…

Differences in STEM degree attainment by region, ethnicity, and degree type

NASA Astrophysics Data System (ADS)

Koledoye, Kimberly A.

Purpose One purpose of this study was to determine the extent to which a difference was present in the STEM degree attainment of all students and particularly of URMs between the 2001 and the 2009 academic year. The second purpose of this study was to determine the extent to which a difference was present in the attainment of STEM associate degrees and bachelor degrees of all students and particularly of URMs awarded between the 2001 and the 2009 academic year. Another purpose of this study was to determine the extent to which a difference existed in STEM associate degree and STEM bachelor degree attainment among geographic regions between the 2001 and the 2009 academic years. The extent to which a difference existed in the STEM bachelor degree and associate degree attainment of URMs among geographic regions between the 2001 to the 2009 academic year was ascertained. The final purpose of this study was to determine the extent to which a difference was present in STEM associate degree and bachelor degree attainment of all students and particularly URMs as a function of degree type between the 2001 academic year and the 2009 academic year. Methodology Archival data from the Integrated Postsecondary Education Data System were utilized to compare STEM degree attainment for regions, regions for URMs, STEM degree attainment overall and for URMs, STEM degree attainment classified by associate degrees and bachelor degrees for all students and URMs, and STEM degree attainment of associate degrees and bachelor degrees for all students and URMs by specific degree type between 2001 and 2009. Findings In this non-experimental causal comparative investigation, statistically significant differences were revealed in 95 of the 165 comparisons. Declining associate degree attainment was concerning, particularly in the computer and information sciences and engineering and engineering technologies. Moderate increases were determined in bachelor degree attainment with statistically significant differences identified in all STEM degree areas. Women had more increases than other URMs, and degree attainment by geographic region varied widely. Given the strong national need for more STEM graduates, reason for concerns are raised by the results of this investigation. KEY WORDS: STEM degrees, Associate, Bachelor, IPEDS

Interactive Media Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 143 competencies, grouped into 25 units, for tech prep programs in the interactive media technologies cluster. The competencies were developed through collaboration of Ohio business, industry, and labor representatives and secondary and associate degree educators. The competencies are rated either "essential"…

Information Processing Technology. Final Report.

ERIC Educational Resources Information Center

Choate, Larry; And Others

A tech prep/associate degree program in information technology was developed to prepare workers for entry into and advancement in occupations entailing applications of scientific principles and higher mathematics in situations involving various office machines. According to the articulation agreement reached, students from five country regional…

Business/Computer Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 272 competencies, grouped into 36 units, for tech prep programs in the business/computer technology cluster. The competencies were developed through collaboration of Ohio business, industry, and labor representatives and secondary and associate degree educators. The competencies are rated either "essential"…

Schiller's Rotten Apples and the Larger Mission of FIT.

ERIC Educational Resources Information Center

Feldman, Marvin

1987-01-01

Describes the Fashion Institute of Technology's (FIT's) 2 + 2 curriculum, in which students complete an associate degree in applied science degree before applying for selective admission to a baccalaureate program. Considers the relevance of creativity to the mission of FIT. Quotes well-known creative people about the sources of creativity and the…

Virtual Libraries: Virtual Communities. Abstracts, Fulltext Documents and PowerPoint Presentations of Papers and Demos Given at the International Association of Technological University Libraries (IATUL) Conference (Brisbane, Queensland, Australia, July 3-7, 2000).

ERIC Educational Resources Information Center

International Association of Technological Univ. Libraries, Gothenburg (Sweden).

This proceedings of the International Association of Technological University Libraries (IATUL) contains the opening address by IATUL president Nancy Fjallbrant and the full text of the following papers: "Building Info-Skills by Degrees: Embedding Information Literacy in University Study" (Wendy Abbott and Deborah Peach); "UQ…

The Outlook in Engineering-Related Technology Fields

ERIC Educational Resources Information Center

Weeks, Peggie

2009-01-01

Community colleges have a long and impressive history of preparing a well-qualified technical workforce to meet the immediate and short-term needs of local and regional industries. Programs range from certificates in areas such as drafting, computer-aided design, and automotive technology to associate degrees in electrical and mechanical…

Recommendations for Radiologic Technology Workforce Development.

ERIC Educational Resources Information Center

Collins, Dale E.

A literature review was conducted to establish criteria for the development and establishment of an associate degree program in radiologic technology in Alaska, where traditional education programs had been slow to respond to the current personnel shortage. The information was obtained from a variety of state, regional, and national organizations…

Technology Assessment Requirements for Programs and Projects

NASA Technical Reports Server (NTRS)

Bilbro, James W.

2006-01-01

Program/project uncertainty can most simply be defined as the unpredictability of its outcome. As might be expected, the degree of uncertainty depends substantially on program/project type. For hi-tech programs/projects, uncertainty all too frequently translates into schedule slips, cost overruns and occasionally even to cancellations or failures - consummations root cause of such events is often attributed to inadequate definition of requirements. If such were indeed the root cause, then correcting the situation would simply be a matter of requiring better requirements definition, but since history seems frequently to repeat itself, this must not be the case - at least not in total. There are in fact many contributors to schedule slips, cost overruns, project cancellations and failures, among them lack of adequate requirements definition. The case can be made, however, that many of these contributors are related to the degree of uncertainty at the outset of the project. And further, that a dominant factor in the degree of uncertainty is the maturity of the technology required to bring the project to fruition. This presentation discusses the concept of relating degrees of uncertainty to Technology Readiness Levels (TRL) and their associated Advancement Degree of Difficulty (AD2) levels. It also briefly describes a quantifiable process to establish the appropriate TRL for a given technology and quantifies through the AD2 what is required to move it from its current TRL to the desired TRL in order to reduce risk and maximize likelihood of successfully infusing the technology.

Enriching Learning for First Year Chemistry Students: Introduction of Adobe Connect

ERIC Educational Resources Information Center

Smith, Erica; Lye, Peter; Greatrex, Ben; Taylor, Michelle; Stupans, Ieva

2013-01-01

The study of chemistry is central within science and other associated degrees. At the University of New England in Armidale academics need to provide chemistry teaching in both a distance and the traditional on-campus mode within science and other degrees. This study explores the contribution that the adoption of Adobe Connect technology can make…

Beyond nutrient-based food indices: a data mining approach to search for a quantitative holistic index reflecting the degree of food processing and including physicochemical properties.

PubMed

Fardet, Anthony; Lakhssassi, Sanaé; Briffaz, Aurélien

2018-01-24

Processing has major impacts on both the structure and composition of food and hence on nutritional value. In particular, high consumption of ultra-processed foods (UPFs) is associated with increased risks of obesity and diabetes. Unfortunately, existing food indices only focus on food nutritional content while failing to consider either food structure or the degree of processing. The objectives of this study were thus to link non-nutrient food characteristics (texture, water activity (a w ), glycemic and satiety potentials (FF), and shelf life) to the degree of processing; search for associations between these characteristics with nutritional composition; search for a holistic quantitative technological index; and determine quantitative rules for a food to be defined as UPF using data mining. Among the 280 most widely consumed foods by the elderly in France, 139 solid/semi-solid foods were selected for textural and a w measurements, and classified according to three degrees of processing. Our results showed that minimally-processed foods were less hyperglycemic, more satiating, had better nutrient profile, higher a w , shorter shelf life, lower maximum stress, and higher energy at break than UPFs. Based on 72 food variables, multivariate analyses differentiated foods according to their degree of processing. Then technological indices including food nutritional composition, a w , FF and textural parameters were tested against technological groups. Finally, a LIM score (nutrients to limit) ≥8 per 100 kcal and a number of ingredients/additives >4 are relevant, but not sufficient, rules to define UPFs. We therefore suggest that food health potential should be first defined by its degree of processing.

Industry Driven Electronic Communication Competencies for an Associate Electronics Degree: A Phenomenological Study

ERIC Educational Resources Information Center

McNeill, Dennis G.

2013-01-01

Scholars and professionals alike contend our nation's competitive position and economic growth depends considerably on the acumen of its science, technology, engineering, and math (STEM) talent pool. In spite of current economic conditions and high national unemployment, there is an increasing demand for those skilled in technology and…

Development of a Two-Year Associate Arts Degree in Environmental Health Technology.

ERIC Educational Resources Information Center

Campbell, Charles R.

The field of Environmental Health Technology (EHT) encompasses both the equipment and the trained expertise required to utilize land, water, energy, and minerals in the service of human health and welfare. EHT technicians work in disease control, licensing bureaus, hospitals, nursing homes, hazardous waste agencies, and other health agencies. In…

Electro-Optical Laser Technology. Curriculum Utilization. Final Report.

ERIC Educational Resources Information Center

Nawn, John H.

This report describes a program to prepare students for employment as laser technicians and laser operators and to ensure that they have the necessary skills required by the industry. The objectives are to prepare a curriculum and syllabus for an associate degree program in Electro-Optical Laser Technology. The 2-year Electro-Optical Laser program…

The 1977 Rankings of Programs for an In-Depth Evaluation. Research Note.

ERIC Educational Resources Information Center

Baratta, Mary Kathryne

Placement, unit cost, retention and attraction data for all programs at Moraine Valley Community College for which information was available were used to determine which programs needed in-depth evaluation. Four of the 24 associate degree programs (secretarial science, radiologic technology, power machine technology, and industrial supervision)…

The Impact of Software on Associate Degree Programs in Electronic Engineering Technology.

ERIC Educational Resources Information Center

Hata, David M.

1986-01-01

Assesses the range and extent of computer assisted instruction software available in electronic engineering technology education. Examines the need for software skills in four areas: (1) high-level languages; (2) assembly language; (3) computer-aided engineering; and (4) computer-aided instruction. Outlines strategies for the future in three…

Solar Energy: Non-Residential Applications and Future Technology: Student Material. First Edition.

ERIC Educational Resources Information Center

Takacs, Robert; Orsak, Charles G., Jr.

Student materials are presented for the course, Non-Residential Applications and Future Technology, one of seven core courses in Navarro College's two-year associate degree program for solar technicians. First, introductory material discusses the form and objectives of the course and ways of using the student materials. Next, readings, worksheets,…

Occupational Technology: An Experiment in Curricular Flexibility

ERIC Educational Resources Information Center

Pepino, Lyle F.

1975-01-01

Describes an Occupational Technology Curriculum, designed to meet the widely divergent needs of individuals already employed in industry or business who desire to upgrade a present skill or acquire a new one. The curriculum is structured so that half of the credits required for the associate degree are free electives and half are required core…

Social Issues in Nanoscience and Nanotechnology Master's Degrees: The Socio-Political Stakes of Curricular Choices

ERIC Educational Resources Information Center

Fages, Volny; Albe, Virginie

2015-01-01

This paper proposes a study of the various ways in which social and ethical issues are integrated in the curricula of nanoscience and nanotechnology master degrees. During the last decade, new types of courses have appeared in science and technology universities, first in the United States and now reaching Europe and France, associating a call for…

Utilizing Human Patient Simulators (HPS) to Meet Learning Objectives across Concurrent Core Nursing Courses: A Pilot Study

ERIC Educational Resources Information Center

Miller, Charman L.; Leadingham, Camille; Vance, Ronald

2010-01-01

Associate Degree Nursing (ADN) faculty are challenged by the monumental responsibility of preparing students to function as safe, professional nurses in a two year course of study. Advances in computer technology and emphasis on integrating technology and active learning strategies into existing course structures have prompted many nurse educators…

Chemical Operations Technology Curriculum Development Project. PY95 Final Detailed Report.

ERIC Educational Resources Information Center

Texas State Technical Coll., Marshall.

A model curriculum for an associate of applied science degree in chemical operations technology (COT) was developed at Texas State Technical College in Marshall, Texas. First, a comprehensive analysis of the local and statewide labor market demand for trained personnel in the advanced field of COT was conducted. Next, a comprehensive task analysis…

Integrating ICT into Teaching-Learning Practices: Promise, Challenges and Future Directions of Higher Educational Institutes

ERIC Educational Resources Information Center

Alemu, Birhanu Moges

2015-01-01

Education is a very socially oriented activity and quality education has traditionally been associated with strong teachers having high degrees of personal contact with students and technologies. Information and Communication Technologies (ICTs) have become commonplace entities in all aspects of life. The use of ICT has fundamentally changed the…

Final Technical Report Laramie County Community College: Utility-Scale Wind Energy Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Douglas P. Cook

The Utility-Scale Wind Energy Technology U.S. Department of Energy (DOE) grant EE0000538, provided a way ahead for Laramie County Community College (LCCC) to increase educational and training opportunities for students seeking an Associate of Applied Science (AAS) or Associate of Science (AS) degree in Wind Energy Technology. The DOE grant enabled LCCC to program, schedule, and successfully operate multiple wind energy technology cohorts of up to 20-14 students per cohort simultaneously. As of this report, LCCC currently runs four cohorts. In addition, the DOE grant allowed LCCC to procure specialized LABVOLT electronic equipment that directly supports is wind energy technologymore » curriculum.« less

Data Acceptance Criteria for Standardized Human-Associated Fecal Source Identification Quantitative Real-Time PCR Methods

EPA Science Inventory

There is a growing interest in the application of human-associated fecal sourceidentification quantitative real-time PCR (qPCR) technologies for water quality management. The transition from a research tool to a standardized protocol requires a high degree of confidence in data q...

Tennessee's Regents Online Degree Program--A Success Story: An Interview with Dr. Robbie Melton, Associate Vice Chancellor for RODP

ERIC Educational Resources Information Center

DeMoulin, Donald F.

2005-01-01

As one of the nation's top virtual university systems, the Tennessee Board of Regents' Online Degree Programs (RODP) has a great story to tell. And at Tennessee Tech University, Kevin Liska and students in the Business-Media Center specialize in telling great stories through technology. Together, the two groups will soon release marketing…

Awareness, knowledge, and perceptions of infertility, fertility assessment, and assisted reproductive technologies in the era of oocyte freezing among female and male university students.

PubMed

Meissner, C; Schippert, C; von Versen-Höynck, Frauke

2016-06-01

The aims of our study were to analyze university student's knowledge and attitude towards parenthood, female fertility, fertility assessment, and oocyte freezing and to explore associations between these aspects and the participant's sex or degree program they were registered for. The study was designed as an online-based cross-sectional survey. A total of 1144 participants answered 27 questions. The data were analyzed using descriptive statistics. Linear regression models were employed to explore associations between sex or university program and attitude towards parenthood, fertility assessment, and oocyte freezing. Female students and students of non-medical degree programs were more likely to plan to have children earlier than male students or students of medical degree programs. Female sex or medical degree program was associated with an overall better knowledge about women's fertility. The better the participant's knowledge about fertility, the more likely the students would consider assisted reproductive technology (ART) treatments as an option to become pregnant when ovarian reserve is low. The majority of students knew the principal of oocyte freezing but would not consider using it. However, in the case of a low ovarian reserve, oocyte freezing would be accepted as an option. Students planned to have children at an age when women's fertility is already declining. Gaps in knowledge about female fertility and the potential of ART were more pronounced in male students and students of non-medical degree programs suggesting an increase of fertility awareness is necessary in these groups to prevent them from infertility and unwanted childlessness.

Associations between Predictive Indicators and Postsecondary Science, Technology, Engineering, and Math Success among Hispanic Students in Texas. REL 2018-279

ERIC Educational Resources Information Center

Borman, Trisha; Margolin, Jonathan; Garland, Marshall; Rapaport, Amie; Park, So Jung; LiCalsi, Christina

2017-01-01

Nationwide, Hispanic students continue to be underrepresented among students who complete a four-year degree in science, technology, engineering, and math (STEM) fields (National Center for Education Statistics, 2016) and among workers in STEM fields. This discrepancy is a concern, especially in light of the projected growth in employment in STEM…

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

A Limited Assessment of the Curricula of Selected Information System Technology Associate Degree Programs

ERIC Educational Resources Information Center

Stange, Melissa

2012-01-01

Previous studies have examined the curricula of information systems technology (IST) programs, and some have noted a discrepancy between the stated needs of industry and the skills and attributes of graduates of 4-year programs. In addition, gaps between the 2-year curricula and the perceived needs of employers have been noted. The purpose of this…

[Incorporation of Information and Communication Technologies and quality of primary healthcare in Brazil].

PubMed

Santos, Alaneir de Fátima Dos; Fonseca, Délcio; Araujo, Lucas Lobato; Procópio, Cristiane da Silva Diniz; Lopes, Érica Araújo Silva; Lima, Angela Maria de Lourdes Dayrell de; Reis, Clarice Magalhães Rodrigues Dos; Abreu, Daisy Maria Xavier de; Jorge, Alzira Oliveira; Matta-Machado, Antonio Thomaz

2017-06-05

Information and Communication Technologies (ICTs) are means to handle information, streamline communication, and contribute to patient care. This article describes the incorporation of Information and Communication Technologies in primary care and its association with quality, based on the Brazilian National Program for the Improvement of Access and Quality in Primary Care (PMAQ in portuguese). This was a cross-sectional study with 17,053 teams. An Index of Incorporation of ICTs was created, which included: information infrastructure, systems, and utilization. Regression analysis was used to assess associations. Only 13.5% of the teams had a high degree of ICTs. The strongest association was seen in the utilization of information. ICTs can contribute to improving quality of primary care.

Broadband polarized emission from P(NDI2OD-T2) polymer.

PubMed

Ulrich, Steve; Sutch, Tabitha; Szulczewski, Greg; Schweizer, Matthias; Barbosa, Newton; Araujo, Paulo

2018-05-18

We investigate the P(NDI2OD-T2) photophysical properties via absorbance and fluorescence spectroscopy, in association with the experimental approach baptized Stokes Spectroscopy, which provides valuable material information through the acquisition and analysis of the fluorescence polarization degree. By changing solvents and using different samples such as solutions, thick, and thin films, it is possible to control the polarization degree spectrum associated to the fluorescence emitted by the polymer's isolated chains and aggregates. We show that the polarization degree could become a powerful tool to obtain information related to the samples morphology, which is connected to their microscopic structure. Moreover, the polarization degree spectra suggest that depolarization effects linked to energy and charge transfer mechanisms are likely taking place. Our findings indicate that P(NDI2OD-T2) polymers are excellent candidates for the advancement of organic technologies that rely on the emission and detection of polarized lights. © 2018 IOP Publishing Ltd.

Broadband polarized emission from P(NDI2OD-T2) polymer

NASA Astrophysics Data System (ADS)

Ulrich, Steven V.; Sutch, Tabitha; Szulczewski, Greg; Schweizer, Matthias; Barbosa Neto, Newton M.; Araujo, Paulo T.

2018-07-01

We investigate the P(NDI2OD-T2) photophysical properties via absorbance and fluorescence spectroscopy, in association with the experimental approach baptized Stokes Spectroscopy, which provides valuable material information through the acquisition and analysis of the fluorescence polarization degree. By changing solvents and using different samples such as solutions, thick, and thin films, it is possible to control the polarization degree spectrum associated to the fluorescence emitted by the polymer’s isolated chains and aggregates. We show that the polarization degree could become a powerful tool to obtain information related to the samples morphology, which is connected to their microscopic structure. Moreover, the polarization degree spectra suggest that depolarization effects linked to energy and charge transfer mechanisms are likely taking place. Our findings indicate that P(NDI2OD-T2) polymers are excellent candidates for the advancement of organic technologies that rely on the emission and detection of polarized lights.

JPRS Report, Science & Technology, USSR: Science & Technology Policy

DTIC Science & Technology

1988-12-19

industrial introduction to a significant degree depend on the level of equipment of the bases and on the methods of the organization of work. The...planning, financing, and the remuneration of labor, and legal status. A significant number of pilot-scale, experimental, and semi- industrial units...plants, and shops operate directly at industrial enterprises and in associations. The pilot experimental enterprises of scientific institu- tions are

Investigating the degree of "stigma" associated with nuclear energy technologies: A cross-cultural examination of the case of fusion power.

PubMed

Horlick-Jones, Tom; Prades, Ana; Espluga, Josep

2012-07-01

The extent to which nuclear energy technologies are, in some sense, "stigmatised" by historical environmental and military associations is of particular interest in contemporary debates about sustainable energy policy. Recent claims in the literature suggest that despite such stigmatisation, lay views on such technologies may be shifting towards a "reluctant acceptance," in the light of concerns about issues like anthropogenic climate change. In this paper, we report on research into learning and reasoning processes concerned with a largely unknown nuclear energy technology; namely fusion power. We focus on the role of the nuclear label, or "brand," in informing how lay citizens make sense of the nature of this technology. Our findings derive from a comparative analysis of data generated in Spain and Britain, using the same methodology.

Diffusion of information technology supporting the Institute of Medicine's quality chasm care aims.

PubMed

Burke, Darrell; Menachemi, Nir; Brooks, Robert G

2005-01-01

This article examines the degree to which healthcare information technology (HIT) supporting the Institute of Medicine's (IOM) six care aims is utilized in the hospital setting and explores organizational factors associated with HIT use. Guided by the IOM's Crossing the quality chasm report and associated literature, 27 applications and/or capabilities are classified according to one or more of the six care aims. A structured survey of Florida hospitals identified the use of HIT. Results suggest that, on average, hospitals have not yet embraced HIT to support the IOM's care aims and that associated organizational factors vary according to care aim.

40 CFR 440.102 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... degree of effluent reduction attainable by the application of the best practicable control technology... degree of effluent reduction attainable by the application of the best practicable control technology...

180 Degree Hybrid (Rat-Race) Junction on CMOS Grade Silicon with a Polyimide Interface Layer

NASA Technical Reports Server (NTRS)

Ponchak, George E.; Papapolymerou, John

2003-01-01

180-degree hybrid junctions can be used to equally divide power between two output ports with either a 0 or 180-degree phase difference. Alternatively, they can be used to combine signals from two sources and output a sum and difference signal. The main limitation of implementing; these on CMOS grade silicon is the high loss associated with the substrate. In this paper, we present a low loss 180-degree hybrid junction on CMOS grade (15 omega-cm) silicon with a polyimide interface layer for the first time. The divider utilizes Finite Ground Coplanar (FGC) line technology, and operates at a center frequency of 15 GIIz.

Compensation of chief executive officers at nonprofit US hospitals.

PubMed

Joynt, Karen E; Le, Sidney T; Orav, E John; Jha, Ashish K

2014-01-01

Hospital chief executive officers (CEOs) can shape the priorities and performance of their organizations. The degree to which their compensation is based on their hospitals' quality performance is not well known. To characterize CEO compensation and examine its relation with quality metrics. Retrospective observational study. Participants included 1877 CEOs at 2681 private, nonprofit US hospitals. We used linear regression to identify hospital structural characteristics associated with CEO pay. We then determined the degree to which a hospital's performance on financial metrics, technologic metrics, quality metrics, and community benefit in 2008 was associated with CEO pay in 2009. The CEOs in our sample had a mean compensation of $595,781 (median, $404,938) in 2009. In multivariate analyses, CEO pay was associated with the number of hospital beds overseen ($550 for each additional bed; 95% CI, 429-671; P < .001), teaching status ($425,078 more at major teaching vs nonteaching hospitals; 95% CI, 315,238-534,918; P < .001), and urban location. Hospitals with high levels of advanced technologic capabilities compensated their CEOs $135,862 more (95% CI, 80,744-190,990; P < .001) than did hospitals with low levels of technology. Hospitals with high performance on patient satisfaction compensated their CEOs $51,706 more than did those with low performance on patient satisfaction (95% CI, 15,166-88,247; P = .006). We found no association between CEO pay and hospitals' margins, liquidity, capitalization, occupancy rates, process quality performance, mortality rates, readmission rates, or measures of community benefit. Compensation of CEOs at nonprofit hospitals was highly variable across the country. Compensation was associated with technology and patient satisfaction but not with processes of care, patient outcomes, or community benefit.

Nuclear Power Plant Technician

ERIC Educational Resources Information Center

Randall, George A.

1975-01-01

The author recognizes a body of basic knowledge in nuclear power plant technoogy that can be taught in school programs, and lists the various courses, aiming to fill the anticipated need for nuclear-trained manpower--persons holding an associate degree in engineering technology. (Author/BP)

Transportation Electrification

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwendeman, Lawrence; Crouch, Alan

This project has accomplished the following objectives: to address the critical need for technician training in new and emerging propulsion technologies by developing new courses, including information and training on electric vehicles, plug-in hybrid electric vehicles, and fuel cell vehicles; to integrate the new certificate with the existing Associate of Applied Science Degree and Certificate automotive degrees; to disseminate these leading edge courses throughout the Commonwealth of Virginia and neighboring Mid-Atlantic States; and to provide training opportunities for displaced workers and underrepresented populations seeking careers in the automotive industry.

Today's Apprentices, Tomorrow's Leaders.

ERIC Educational Resources Information Center

Tuholski, Robert J.

1982-01-01

Describes an innovative three-year apprenticeship training program in metal cutting tool operation which combines a certification program from the company with an associate in arts degree in applied technology (industrial engineering) from a community college. The combination of hands-on training with theoretical training is explained. (CT)

[Biohydrometallurgical technology of a complex copper concentrate process].

PubMed

Murav'ev, M I; Fomchenko, N V; Kondrat'eva, T F

2011-01-01

Leaching of sulfide-oxidized copper concentrate of the Udokan deposit ore with a copper content of 37.4% was studied. In the course of treatment in a sulfuric acid solution with pH 1.2, a copper leaching rate was 6.9 g/kg h for 22 h, which allowed extraction of 40.6% of copper. As a result of subsequent chemical leaching at 80 degrees C during 7 h with a solution of sulphate ferric iron obtained after bio-oxidation by an association of microorganisms, the rate of copper recovery was 52.7 g/kg h. The total copper recovery was 94.5% (over 29 h). Regeneration of the Fe3+ ions was carried out by an association of moderately thermophilic microorganisms, including bacteria of genus Sulfobacillus and archaea of genus Ferroplasma acidiphilum, at 1.0 g/l h at 40 degrees C in the presence of 3% solids obtained by chemical leaching of copper concentrate. A technological scheme of a complex copper concentrate process with the use of bacterial-chemical leaching is proposed.

Decision-Tree Analysis for Predicting First-Time Pass/Fail Rates for the NCLEX-RN® in Associate Degree Nursing Students.

PubMed

Chen, Hsiu-Chin; Bennett, Sean

2016-08-01

Little evidence shows the use of decision-tree algorithms in identifying predictors and analyzing their associations with pass rates for the NCLEX-RN(®) in associate degree nursing students. This longitudinal and retrospective cohort study investigated whether a decision-tree algorithm could be used to develop an accurate prediction model for the students' passing or failing the NCLEX-RN. This study used archived data from 453 associate degree nursing students in a selected program. The chi-squared automatic interaction detection analysis of the decision trees module was used to examine the effect of the collected predictors on passing/failing the NCLEX-RN. The actual percentage scores of Assessment Technologies Institute®'s RN Comprehensive Predictor(®) accurately identified students at risk of failing. The classification model correctly classified 92.7% of the students for passing. This study applied the decision-tree model to analyze a sequence database for developing a prediction model for early remediation in preparation for the NCLEXRN. [J Nurs Educ. 2016;55(8):454-457.]. Copyright 2016, SLACK Incorporated.

Technology in the Nursing Classroom.

ERIC Educational Resources Information Center

Siktberg, Linda L.; Dillard, Nancy L.

1999-01-01

Describes nursing education integrating the Internet at Ball State University: (1) redesign of a professional-issues course; (2) electronic conferencing and computer quizzes in a health-appraisal course; (3) Internet tools used in an introductory associate-degree course; and (4) redesign of the required registered nurse-completion course. (SK)

College Level Aviation Curriculum Development.

ERIC Educational Resources Information Center

Mattson, Betty J.

This document describes a college-level curriculum for airplane pilots that is expected to be available at Muskegon (Michigan) College of Business and Technology in fall 1990. The curriculum offers associate or bachelor degree, college credit for earned flight ratings, private license, transfer credit for other aviation college programs, the…

Mining Genotype-Phenotype Associations from Public Knowledge Sources via Semantic Web Querying.

PubMed

Kiefer, Richard C; Freimuth, Robert R; Chute, Christopher G; Pathak, Jyotishman

2013-01-01

Gene Wiki Plus (GeneWiki+) and the Online Mendelian Inheritance in Man (OMIM) are publicly available resources for sharing information about disease-gene and gene-SNP associations in humans. While immensely useful to the scientific community, both resources are manually curated, thereby making the data entry and publication process time-consuming, and to some degree, error-prone. To this end, this study investigates Semantic Web technologies to validate existing and potentially discover new genotype-phenotype associations in GWP and OMIM. In particular, we demonstrate the applicability of SPARQL queries for identifying associations not explicitly stated for commonly occurring chronic diseases in GWP and OMIM, and report our preliminary findings for coverage, completeness, and validity of the associations. Our results highlight the benefits of Semantic Web querying technology to validate existing disease-gene associations as well as identify novel associations although further evaluation and analysis is required before such information can be applied and used effectively.

40 CFR 430.114 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... effluent reduction attainable by the application of the best available technology economically achievable... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 434.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... representing the degree of effluent reduction attainable by application of the best available technology... application of the best available technology economically achievable: BAT Effluent Limitations Pollutant or...

40 CFR 434.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... representing the degree of effluent reduction attainable by application of the best available technology... application of the best available technology economically achievable: BAT Effluent Limitations Pollutant or...

40 CFR 440.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently... degree of effluent reduction attainable by the application of the best practicable control technology...

40 CFR 440.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently... degree of effluent reduction attainable by the application of the best practicable control technology...

40 CFR 434.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... representing the degree of effluent reduction attainable by application of the best available technology... application of the best available technology economically achievable: BAT Effluent Limitations Pollutant or...

40 CFR 434.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... representing the degree of effluent reduction attainable by application of the best available technology... application of the best available technology economically achievable: BAT Effluent Limitations Pollutant or...

40 CFR 430.114 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... representing the degree of effluent reduction attainable by the application of the best available technology... best available technology economically achievable (BAT). Non-continuous dischargers shall not be...

40 CFR 430.114 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... effluent reduction attainable by the application of the best available technology economically achievable... representing the degree of effluent reduction attainable by the application of the best available technology...

1+1=3: Cross-Discipline Collaboration Really Adds Up!

ERIC Educational Resources Information Center

Breen, Mindy

2006-01-01

The Department of Engineering & Design at Eastern Washington University (EWU) offers a bachelor of arts degree in visual communication design and bachelor of science degrees in mechanical engineering technology, manufacturing technology, construction technology, design technology, electrical engineering, computer engineering technology and…

Use of technological aids and interpretation services among children and adults with hearing loss.

PubMed

Dammeyer, Jesper; Lehane, Christine; Marschark, Marc

2017-10-01

The technological development of communication aids for people with hearing loss has progressed rapidly over the last decades. Quality has improved and the number of different types of aids has increased. However, few studies have examined the prevalence of technology use and interpreting services use among people with hearing loss as they relate to demographic characteristics of this population. This study reports from national surveys of children and adults with hearing loss. Use of hearing aids, cochlear implants, other aids and interpreting services were analysed with regard to gender, age, degree of hearing loss, mode of communication, having an additional disability, level of educational achievement among adults, and whether or not children lived together with both of their parents. 269 children (0-15 years of age) and 839 adults (16-65 years of age). Differences in technology and service use were associated with age, degree of hearing loss, and mode of communication among children and adults, and gender and level of educational achievement among adults. Individual and social factors have an impact on technological hearing aid and interpreter use. More research about individual differences and clinical implications of support services is needed.

Competency: Does High Fidelity Simulation Make a Difference?

ERIC Educational Resources Information Center

Valente, Alice M.

2010-01-01

High fidelity simulation is a well documented adjunctive teaching method in medical and nurse practitioner programs, but few studies of effectiveness on this technology on the development of competency have emphasized pre-licensure associate degree level programs. This study explored student competency in the application of the nursing process…

Standards-Based External Exams and Students' Science-Related Career Expectations: An International Perspective

ERIC Educational Resources Information Center

Han, Seong Won

2016-01-01

Students' science-related career expectations are important for predicting their future science, technology, engineering, and mathematics (STEM)-related educational and occupational attainments. This study examines the degree to which standards-based external examinations are associated with a student's propensity for pursuing science-related…

Electronics Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

Directory of Credit-Granting Policies in Medical Laboratory Education.

ERIC Educational Resources Information Center

National Committee for Careers in Medical Technology, Bethesda, MD.

Ways now exist for medical laboratory workers to advance up the educational career ladder, gaining credit for prior training and/or experience. A total of 369 Certified Medical Laboratory Assistant Schools, colleges with Associate Degree Medical Laboratory Technicians programs, schools of Medical Technology, and colleges with baccalaureate Medical…

Transforming Associate Degree Nursing Education with Internet Technology

ERIC Educational Resources Information Center

Tremel, Maureen D.

2004-01-01

In light of today's dynamic health care delivery system, nursing education cannot be passive and still produce competent and effective registered nurses. Registered nurses must be able to communicate confidently in order to advocate for their patients and themselves. The nursing faculty at Seminole Community College have accepted the challenge to…

Federal Grants Drive STEM Curricula at SIPI

ERIC Educational Resources Information Center

Tribal College Journal of American Indian Higher Education, 2016

2016-01-01

First established in 1971, Southwestern Indian Polytechnic Institute (SIPI) in Albuquerque, New Mexico, is one of two tribal colleges that the Bureau of Indian Education (BIE) operates and funds. SIPI offers a variety of certificate and two-year associate's degree programs, but its primary curricular focus remains the science, technology,…

Energy Related Technology Programs at the Non-Baccalaureate Postsecondary Level.

ERIC Educational Resources Information Center

Brooking, Walter J.

Guidelines are presented for institution administrators considering the initiation of programs to train energy-related technicians at the associate degree level. Two essential preliminary steps are outlined: Acquiring and analyzing all available information about the proposed field including national legislation and surveying the probable need for…

Soils and Foundations: A Syllabus.

ERIC Educational Resources Information Center

Long, Melvin J.

The teaching guide and course outline for a 12-week course in soils and foundations is designed to help student technicians in a two-year associate degree civil engineering technology program to obtain entry level employment as highway engineering aides, soil testing technicians, soil mappers, or construction inspectors. The seven teaching units…

Automated Manufacturing/Robotics Technology: Certificate and Associate Degree Programs.

ERIC Educational Resources Information Center

McQuay, Paul L.

A description is provided of the Automated Manufacturing/Robotics program to be offered at Delaware County Community College beginning in September 1984. Section I provides information on the use of reprogramable industrial robots in manufacturing and the rapid changes in production that can be effected through the application of automated…

Preparing technicians for engineering materials technology

NASA Technical Reports Server (NTRS)

Jacobs, James A.; Metzloff, Carlton H.

1990-01-01

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Waste-Management Education and Research Consortium (WERC) annual progress report, 1991--1992. Appendixes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1992-04-07

This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineering; Appendix D - Non-degree Certificate Program; Appendix E - Curriculum for Associate Degree Program; Appendix F - Curriculum for NCC Program; Appendix G - Information 1991 Teleconference Series; Appendix H - Information on 1992 Teleconference Series; Appendix I - WERC interactive Television Courses; Appendix J - WERC Research Seminar Series; Appendix K - Sites for Hazardous/Radioactive Waste Management Series; Appendix L- Summary of Technology Development of the Second Year; Appendix M -more » List of Major Publications Resulting from WERC; Appendix N - Types of Equipment at WERC Laboratories.« less

Waste-Management Education and Research Consortium (WERC) annual progress report, 1991--1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maji, A. K.; Thomson, Bruce M.; Samani, Zohrab A.

1992-04-07

This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineering; Appendix D - Non-degree Certificate Program; Appendix E - Curriculum for Associate Degree Program; Appendix F - Curriculum for NCC Program; Appendix G - Information 1991 Teleconference Series; Appendix H - Information on 1992 Teleconference Series; Appendix I - WERC interactive Television Courses; Appendix J - WERC Research Seminar Series; Appendix K - Sites for Hazardous/Radioactive Waste Management Series; Appendix L- Summary of Technology Development of the Second Year; Appendix M -more » List of Major Publications Resulting from WERC; Appendix N - Types of Equipment at WERC Laboratories.« less

Progress in manufacturing large primary aircraft structures using the stitching/RTM process

NASA Technical Reports Server (NTRS)

Markus, Alan; Thrash, Patrick; Rohwer, Kim

1993-01-01

The Douglas Aircraft/NASA Act contract has been focused over the past three years at developing a materials, manufacturing, and cost base for stitched/Resin Transfer Molded (RTM) composites. The goal of the program is to develop RTM and stitching technology to provide enabling technology for application of these materials in primary aircraft structure with a high degree of confidence. Presented in this paper will be the progress to date in the area of manufacturing and associated cost values of stitched/RTM composites.

[The studies on the Ku Huang granula technology].

PubMed

Qian, Kun; Kuang, Qi; Dong, Wei; Shen, Jun

2008-02-01

To determine the optimum technology of the Ku Huang granula. Making Emodin and Chrysophanol for index, using HPLC, extracturm softening point data and orthogonal design experiment to research the preparatory technology of the Ku Huang granula to screen the optimum technology. The Ku Huang granula was pelletized at 100% dextrin, 170 degrees C- 175 degrees C spray drying and at the conditions of 75% ethylalcohol, 85 degrees C, 4 Hz, 3 hours fluidizing pelletization. The optimum condition is reasonable.

Solar Energy: System Sizing, Design, and Retrofit: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "System Sizing, Design, and Retrofit," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

Computerized Testing of Level III Associate Degree Nursing Students versus Paper and Pencil Testing Methods

ERIC Educational Resources Information Center

Gullo, Shirna R.

2014-01-01

Computerized testing may be one solution to enhance performance on the curricular Health Education Systems Inc. (HESI) exam and the National Council Licensure Exam for Registered Nurses (NCLEX-RN). Due to the integration of improved technological processes and procedures in healthcare for computerized documentation and electronicmedical records,…

Readings in Health and Medical Technology Education Programs. Vision 2.

ERIC Educational Resources Information Center

Frederick, Molly, Ed.

This collection of articles is a foundation-supported publication and will be of special interest to those planning health education curriculums and programs. They fall into three sections: a background article, a set of articles about actual programs, and a comprehensive collection of articles about planning the associate degree program in the…

40 CFR 435.14 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... located beyond 3 miles from shore: Water-based drilling fluids and associated drill cuttings Free Oil No... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Effluent limitations guidelines... control technology (BCT). 435.14 Section 435.14 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

40 CFR 435.14 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... located beyond 3 miles from shore: Water-based drilling fluids and associated drill cuttings Free Oil No... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Effluent limitations guidelines... control technology (BCT). 435.14 Section 435.14 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY...

Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

38 CFR 21.4201 - Restrictions on enrollment; percentage of students receiving financial support.

Code of Federal Regulations, 2014 CFR

2014-07-01

... technology or auto mechanics certificate) and other associate degree courses where a field is specified must... established, organized and operated pursuant to regulations of a military department of the Armed Forces as... offered under contract with the Department of Defense, (ii) Is on or immediately adjacent to a military...

38 CFR 21.4201 - Restrictions on enrollment; percentage of students receiving financial support.

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology or auto mechanics certificate) and other associate degree courses where a field is specified must... established, organized and operated pursuant to regulations of a military department of the Armed Forces as... offered under contract with the Department of Defense, (ii) Is on or immediately adjacent to a military...

38 CFR 21.4201 - Restrictions on enrollment; percentage of students receiving financial support.

Code of Federal Regulations, 2013 CFR

2013-07-01

... technology or auto mechanics certificate) and other associate degree courses where a field is specified must... established, organized and operated pursuant to regulations of a military department of the Armed Forces as... offered under contract with the Department of Defense, (ii) Is on or immediately adjacent to a military...

A Health Informatics Curriculum Congruent with IS 2010 and IMIA Recommendations for an Undergraduate Degree

ERIC Educational Resources Information Center

Longenecker, Herbert E., Jr.; Campbell, S. Matt; Landry, Jeffrey P.; Pardue, Harold; Daigle, Roy J.

2012-01-01

In addition to being a relevant program for health information technology workers, a recently proposed Health Informatics program was designed with additional objectives in mind: that the program is compatible with the IS 2010 Model Curriculum and that it satisfies the International Medical Informatics Association recommendation for undergraduate…

Solar Energy: Materials, Materials Handling, and Fabrication Processes: Student Material. First Edition.

ERIC Educational Resources Information Center

Bolin, William Everet; Orsak, Charles G., Jr.

Designed for student use in "Materials, Materials Handling, and Fabrication Processes," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the…

Environmental Resource Management Issues in Agronomy: A Lecture/Laboratory Course

ERIC Educational Resources Information Center

Munn, D. A.

2004-01-01

Environmental Sciences Technology T272 is a course with a laboratory addressing problems in soil and water quality and organic wastes utilization to serve students from associate degree programs in laboratory science and environmental resources management at a 2-year technical college. Goals are to build basic lab skills and understand the role…

Hazardous Materials Technology: A Community College's Response to a Critical Employment Need.

ERIC Educational Resources Information Center

Friedel, Janice N.; And Others

Studies conducted by the Eastern Iowa Community College District in 1986 revealed a lack of credit programs and curricula for training individuals in the technical aspects of hazardous materials management and need for hazardous materials technicians by local industry. In response, an associate of applied science (AAS) degree program in Hazardous…

The effects of potato and rice starch as substitutes for phosphate in and degree of comminution on the technological, instrumental and sensory characteristics of restructured ham.

PubMed

Resconi, Virginia C; Keenan, Derek F; García, Elisa; Allen, Paul; Kerry, Joe P; Hamill, Ruth M

2016-11-01

The effects of sodium tripolyphosphate (STPP), two sources of starch (potato starch: PS and rice starch: RS) and comminution degree (CD) on the technological, instrumental and sensory characteristics of reformed hams were studied using response surface methodology. Both starches reduced cook loss and decreased ham flavour intensity, but RS had stronger effects on instrumental measures of texture, while PS was associated with improved juiciness when low/no added STPP was included. Coarsely ground meat, processed 100% with the kidney plate was associated with slightly increased cook loss, reduced texture profile analysis parameters and a more intense ham flavour compared to the other treatment (80% ground with a kidney plate plus 20% with a 9mm plate). STPP was the sole factor affecting overall liking. If starch is included in the formulation, the standard level of STPP (0.3%) can be reduced by half with no increase in cook losses, but some decline in sensory quality cannot be avoided. Copyright © 2016 Elsevier Ltd. All rights reserved.

Are We Ready for the Bachelor's Degree in Educational Technology? Perceptions from the Field and a Proposal

ERIC Educational Resources Information Center

Ritzhaupt, Albert D.; Kang, YoungJu

2015-01-01

Some in the field of educational technology have called for offering bachelor's degrees. Unfortunately, the literature base only provides guidance on designing, developing, and delivering master's and doctoral degree programs. This article, in distinction, focuses on the design of a bachelor's degree program by focusing on the perceptions of…

Women in Technology: College Experiences That Are Correlated with Long-Term Career Success

ERIC Educational Resources Information Center

Moreno, Melissa Gearhart

2017-01-01

Women are underrepresented in technology careers because they pursue technology degrees less frequently and leave technology careers at greater numbers than do men. By analyzing a representative dataset of college graduates with degrees in computer science, computer engineering, and management information systems, this study identified…

Mining Genotype-Phenotype Associations from Public Knowledge Sources via Semantic Web Querying

PubMed Central

Kiefer, Richard C.; Freimuth, Robert R.; Chute, Christopher G; Pathak, Jyotishman

Gene Wiki Plus (GeneWiki+) and the Online Mendelian Inheritance in Man (OMIM) are publicly available resources for sharing information about disease-gene and gene-SNP associations in humans. While immensely useful to the scientific community, both resources are manually curated, thereby making the data entry and publication process time-consuming, and to some degree, error-prone. To this end, this study investigates Semantic Web technologies to validate existing and potentially discover new genotype-phenotype associations in GWP and OMIM. In particular, we demonstrate the applicability of SPARQL queries for identifying associations not explicitly stated for commonly occurring chronic diseases in GWP and OMIM, and report our preliminary findings for coverage, completeness, and validity of the associations. Our results highlight the benefits of Semantic Web querying technology to validate existing disease-gene associations as well as identify novel associations although further evaluation and analysis is required before such information can be applied and used effectively. PMID:24303249

Academic Standards for Developing, Implementing, Evaluating, and Improving Information Science and Technology Baccalaureate Degrees

ERIC Educational Resources Information Center

Shields-Bryant, Elayne

2006-01-01

The unprecedented growth, development and implementation of information technology (IT) driven by e-commerce and other technological advances have resulted in an increased demand of technology skilled workers (Reichgelt, Zhang, & Price, 2002; United States Department of Labor Bureau of Labor Statistics, 2005). In response to degree-dependent…

Solar Energy: Instructor Guides, Labs and Tests. First Edition.

ERIC Educational Resources Information Center

Orsak, Charles G., Jr.; And Others

Instructor guides are provided for each of 11 courses in a 2-year associate degree program in solar technology. The semester-length solar courses are broken down into modules which correspond roughly to a 1- to 2-week block of instruction. Each guide presents a course description, course objectives, references for further information, and a…

Specialized High Schools and Talent Search Programs: Incubators for Adolescents with High Ability in STEM Disciplines

ERIC Educational Resources Information Center

Almarode, John T.; Subotnik, Rena F.; Crowe, Edward; Tai, Robert H.; Lee, Geesoo Maie; Nowlin, Fiona

2014-01-01

The purpose of this study is to investigate the association between self-efficacy and maintenance of interest in science, technology, engineering, and mathematics (STEM) resulting in completion of an undergraduate degree in a science related area. To pursue this analysis, the researchers surveyed 3,510 graduates from selective specialized science…

Community Needs Assessment for an Electronics and Computer Engineering Technology Program at Maui, Molokai, and Lanai.

ERIC Educational Resources Information Center

Pezzoli, Jean A.

In June 1992, Maui Community College (MCC), in Hawaii, conducted a survey of the communities of Maui, Molokai, Lanai, and Hana to determine perceived needs for an associate degree and certificate program in electronics and computer engineering. Questionnaires were mailed to 500 firms utilizing electronic or computer services, seeking information…

The Power of Associations Social Media and Social Movements: Facebook in the Interactions of Social Movement Organizations

ERIC Educational Resources Information Center

Baron, Luis Fernando

2013-01-01

There are many indications that social mobilization and political participation have been transformed by Information Communication Technologies (ICT), and, more recently, by Social Media. In spite of many studies which have attempted to grapple with their interrelationship, we still know little about the degree and complexity of those…

Great Careers in Two Years: The Associate Degree Option. High Skill and High Wage Jobs Available through Two-Year Programs.

ERIC Educational Resources Information Center

Phifer, Paul

This book explores high-skill and high-wage jobs available through two-year programs. It identifies 100 high-need occupational areas, and discusses "hot" programs and starting salaries for graduates of dental hygiene, manufacturing, process technology, telecommunications, physical therapy assisting, and registered nursing. Each career article…

Institutional Motivation and Policy Change Associated with Land Grant Institutions' Involvement in Economic Development. ASHE Annual Meeting Paper.

ERIC Educational Resources Information Center

Cote, Lawrence S.; And Others

A study investigated: (1) the degree of land grant institution involvement in economic development activity, defined in terms of 17 selected cooperative research and technology exchange activities; (2) changes in selected academic policies (patents, consulting, conflict of interest, conflict of commitment, and extra compensation); and (3) the…

Apprenticeship 2000: A Model for Community College Collaboration with Business and Industry. Results of a National Study Involving Three Industries.

ERIC Educational Resources Information Center

Cantor, Jeffrey A.

Business is recognizing that the associate degree is a necessity in high technology fields. Innovative practices link businesses with community colleges, allowing apprentices to gain basic job skills and a higher education. A research study explored three industries and their relationship with community colleges: automotive, construction, and…

A Nonlinear, Six-Degree of Freedom Precision Formation Control Algorithm, Based on Restricted Three Body Dynamics

NASA Technical Reports Server (NTRS)

Bauer, Frank (Technical Monitor); Luquette, Richard J.; Sanner, Robert M.

2003-01-01

Precision Formation Flying is an enabling technology for a variety of proposed space-based observatories, including the Micro-Arcsecond X-ray Imaging Mission (MAXIM), the associated MAXIM pathfinder mission, and the Stellar Imager. An essential element of the technology is the control algorithm. This paper discusses the development of a nonlinear, six-degree of freedom (6DOF) control algorithm for maintaining the relative position and attitude of a spacecraft within a formation. The translation dynamics are based on the equations of motion for the restricted three body problem. The control law guarantees the tracking error convergences to zero, based on a Lyapunov analysis. The simulation, modelled after the MAXIM Pathfinder mission, maintains the relative position and attitude of a Follower spacecraft with respect to a Leader spacecraft, stationed near the L2 libration point in the Sun-Earth system.

An integrated process analytical technology (PAT) approach to monitoring the effect of supercooling on lyophilization product and process parameters of model monoclonal antibody formulations.

PubMed

Awotwe Otoo, David; Agarabi, Cyrus; Khan, Mansoor A

2014-07-01

The aim of the present study was to apply an integrated process analytical technology (PAT) approach to control and monitor the effect of the degree of supercooling on critical process and product parameters of a lyophilization cycle. Two concentrations of a mAb formulation were used as models for lyophilization. ControLyo™ technology was applied to control the onset of ice nucleation, whereas tunable diode laser absorption spectroscopy (TDLAS) was utilized as a noninvasive tool for the inline monitoring of the water vapor concentration and vapor flow velocity in the spool during primary drying. The instantaneous measurements were then used to determine the effect of the degree of supercooling on critical process and product parameters. Controlled nucleation resulted in uniform nucleation at lower degrees of supercooling for both formulations, higher sublimation rates, lower mass transfer resistance, lower product temperatures at the sublimation interface, and shorter primary drying times compared with the conventional shelf-ramped freezing. Controlled nucleation also resulted in lyophilized cakes with more elegant and porous structure with no visible collapse or shrinkage, lower specific surface area, and shorter reconstitution times compared with the uncontrolled nucleation. Uncontrolled nucleation however resulted in lyophilized cakes with relatively lower residual moisture contents compared with controlled nucleation. TDLAS proved to be an efficient tool to determine the endpoint of primary drying. There was good agreement between data obtained from TDLAS-based measurements and SMART™ technology. ControLyo™ technology and TDLAS showed great potential as PAT tools to achieve enhanced process monitoring and control during lyophilization cycles. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

Health information technology impact on productivity.

PubMed

Eastaugh, Steven R

2012-01-01

Managers work to achieve the greatest output for the least input effort, better balancing all factors of delivery to achieve the most with the smallest resource effort. Documentation of actual health information technology (HIT) cost savings has been elusive. Information technology and linear programming help to control hospital costs without harming service quality or staff morale. This study presents production function results from a study of hospital output during the period 2008-2011. The results suggest that productivity varies widely among the 58 hospitals as a function of staffing patterns, methods of organization, and the degree of reliance on information support systems. Financial incentives help to enhance productivity. Incentive pay for staff based on actual productivity gains is associated with improved productivity. HIT can enhance the marginal value product of nurses and staff, so that they concentrate their workday around patient care activities. The implementation of electronic health records (EHR) was associated with a 1.6 percent improvement in productivity.

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 458.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... Thermal Process Subcategory § 458.23 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. The...

40 CFR 458.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... Channel Process Subcategory § 458.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. The...

40 CFR 458.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... Furnace Process Subcategory § 458.13 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best available technology economically achievable. The...

40 CFR 434.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... NEW SOURCE PERFORMANCE STANDARDS Alkaline Mine Drainage § 434.43 Effluent limitations guidelines representing the degree of effluent reduction attainable by application of the best available technology...

40 CFR 440.142 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... Placer Mine Subcategory § 440.142 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 440.142 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... Placer Mine Subcategory § 440.142 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 440.142 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... Placer Mine Subcategory § 440.142 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 434.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... NEW SOURCE PERFORMANCE STANDARDS Alkaline Mine Drainage § 434.43 Effluent limitations guidelines representing the degree of effluent reduction attainable by application of the best available technology...

40 CFR 408.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 408.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 408.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 408.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 408.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

40 CFR 424.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Open Electric... representing the degree of effluent reduction attainable by the application of the best available technology...

[Possibilities of modern imaging technologies in early diagnosis of Alzheimer disease].

PubMed

Unschuld, Paul G

2015-04-01

Recent advances in neuroimaging technology and image analysis algorithms have significantly contributed to a better understanding of spatial and temporal aspects of brain change associated with Alzheimer Disease. The current review will demonstrate how functional (fMRI) and structural magnetic resonance imaging (MRI) techniques may be used to identify distinct patterns of brain change associated with disease progression and also increased risk for Alzheimer Disease. Moreover, Positron Emission Tomography (PET) based measures of glucosemetabolism (Fluorodeoxyglucose, FDG) and Amyloid-beta plaque density (11-C-Pittsburgh Compound B, PiB and 18-F) will be reviewed regarding their diagnostic value for assessing the individual degree of Alzheimer -pathology and thus complement the information provided by MRI and other clinical measures.

Waste-Management Education and Research Consortium (WERC) annual progress report, 1992--1993. Appendices

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-02-15

This report contains the following appendices: Appendix A - Requirements for Undergraduate Level; Appendix B - Requirements for Graduate Level; Appendix C - Graduate Degree In Environmental Engineeringat New Mexico State University; Appendix D - Non-degree Certificate program; Appendix E - Curriculum for Associate Degree Program in Radioactive & Hazardous Waste Materials; Appendix F - Curriculum for NCC Program in Earth & Environmental Sciences; Appendix G - Brochure of 1992 Teleconference Series; Appendix H - Sites for Hazardous/Radioactive Waste Management Series; Appendix I - WERC Interactive Television Courses; Appendix J - WERC Research Seminar Series Brochures; Appendix K - Summarymore » of Technology Development of the Third Year; Appendix L - List of Major Publications Resulting From WERC; Appendix M - Types of Equipment at WERC Laboratories; and Appendix N - WERC Newsletter Examples.« less

40 CFR 436.182 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... technology currently available. 436.182 Section 436.182 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... best practicable control technology currently available (BPT): (1) Discharges of process generated...

40 CFR 436.182 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology currently available. 436.182 Section 436.182 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... best practicable control technology currently available (BPT): (1) Discharges of process generated...

40 CFR 436.182 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... technology currently available. 436.182 Section 436.182 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... best practicable control technology currently available (BPT): (1) Discharges of process generated...

40 CFR 430.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... new technology components or process modifications and identifying critical path relationships within... degree of effluent reduction attainable by the application of best available technology economically... effluent reduction attainable by the application of best available technology economically achievable (BAT...

Redefining Science, Technology, Engineering, and Mathematics (STEM) Educational Opportunities for Underserved and Underrepresented Students at NASA

ERIC Educational Resources Information Center

Hackler, Amanda Smith

2011-01-01

Underserved and underrepresented students consistently leave science, technology, engineering, and mathematics (STEM) degree fields to pursue less demanding majors. This perpetual problem slowed the growth in STEM degree fields (United States Department of Labor, 2007). Declining enrollment in STEM degree fields among underserved and…

A Proposal to the Massachusetts Board of Regional Community Colleges for a New Occupational Program.

ERIC Educational Resources Information Center

Viaux, Frederic B.

The development of a Mental Health Technology Program at Middlesex Community College is proposed. The 2-year program would train the student to become a middle-level generalist in the field of mental health with special abilities as a communicator. On successfully completing the program, the student would receive an Associate Degree in Mental…

40 CFR 420.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... best available technology economically achievable. (a) Electric arc furnace steelmaking—semi-wet. No... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125...

40 CFR 430.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 420.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... best practicable control technology currently available. (a) Electric arc furnace steelmaking—semi-wet... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 415.432 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available (BPT). 415.432 Section 415.432 Protection of Environment ENVIRONMENTAL... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 406.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: there shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... by the application of the best available technology economically achievable. The following...

40 CFR 426.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... attainable by the application of the best available technology economically achievable. The following...

40 CFR 427.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... attainable by the application of the best available technology economically achievable. The following...

40 CFR 418.72 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 418.72 Section 418.72 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 426.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... by the application of the best available technology economically achievable. The following...

40 CFR 415.272 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available (BPT). 415.272 Section 415.272 Protection of Environment ENVIRONMENTAL... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 427.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... attainable by the application of the best available technology economically achievable. The following...

40 CFR 418.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... effluent reduction attainable by the application of the best available technology economically achievable... subpart after application of the best available technology economically achievable: There shall be no...

40 CFR 418.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... application of the best available technology economically achievable: There shall be no discharge of process... representing the degree of effluent reduction attainable by the application of the best available technology... attainable by the application of the best available technology economically achievable. The following...

40 CFR 415.292 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available (BPT). 415.292 Section 415.292 Protection of Environment ENVIRONMENTAL... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 424.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... reduction attainable by the application of the best available technology economically achievable. The...

40 CFR 406.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... application of the best available technology economically achievable. The following limitations establish the... subject to the provisions of this subpart after application of the best available technology economically...

40 CFR 426.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: There shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... attainable by the application of the best available technology economically achievable. The following...

40 CFR 406.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology economically achievable: there shall be no discharge of process waste water pollutants to... representing the degree of effluent reduction attainable by the application of the best available technology... by the application of the best available technology economically achievable. The following...

40 CFR 406.83 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... application of the best available technology economically achievable. The following limitations establish the... subject to the provisions of this subpart after application of the best available technology economically...

40 CFR 440.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.63 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 440.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... application of the best practicable control technology currently available (BPT). The concentration of...

40 CFR 440.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable by the application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable by the application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 440.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 440.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... attainable by the application of the best practicable control technology currently available (BPT). The...

40 CFR 440.23 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). The concentration of pollutants...

40 CFR 440.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 440.53 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... application of the best practicable control technology currently available (BPT). The concentration of...

40 CFR 440.23 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). The concentration of pollutants...

40 CFR 440.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). (a) The concentration of...

40 CFR 440.53 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.53 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.63 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable by the application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). (a) The concentration of...

40 CFR 440.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable after application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.63 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 440.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... attainable by the application of the best practicable control technology currently available (BPT). The...

40 CFR 440.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... attainable by the application of the best available technology economically achievable (BAT). Except as... reduction attainable by the application of the best available technology economically achievable (BAT): (a...

40 CFR 440.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable by the application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.13 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 436.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... technology currently available. 436.22 Section 436.22 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... of the best practicable control technology currently available (BPT): (1) Discharges of process...

40 CFR 440.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable after application of the best practicable control technology currently available (BPT...

40 CFR 436.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology currently available. 436.22 Section 436.22 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... of the best practicable control technology currently available (BPT): (1) Discharges of process...

40 CFR 440.13 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.23 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). The concentration of pollutants...

40 CFR 436.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... technology currently available. 436.22 Section 436.22 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... of the best practicable control technology currently available (BPT): (1) Discharges of process...

40 CFR 440.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.23 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). The concentration of pollutants...

40 CFR 440.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT). (a) The concentration of...

40 CFR 440.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 440.113 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... attainable by the application of the best available technology economically achievable (BAT). Except as... reduction attainable by the application of the best available technology economically achievable (BAT): (a...

40 CFR 440.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in... attainable after application of the best practicable control technology currently available (BPT): (a) The...

40 CFR 440.13 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 440.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... attainable by the application of the best practicable control technology currently available (BPT). Except as... attainable by the application of the best practicable control technology currently available (BPT). The...

40 CFR 440.63 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

40 CFR 436.42 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... technology currently available. 436.42 Section 436.42 Protection of Environment ENVIRONMENTAL PROTECTION... degree of effluent reduction attainable by the application of the best practicable control technology... of the best practicable control technology currently available (BPT): (1) With the exception of...

40 CFR 440.53 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in subpart L of... application of the best available technology economically achievable (BAT): (a) The concentration of...

Educators' Perceived Importance of Web 2.0 Technology Applications

ERIC Educational Resources Information Center

Pritchett, Christal C.; Wohleb, Elisha C.; Pritchett, Christopher G.

2013-01-01

This research study was designed to examine the degree of perceived importance of interactive technology applications among various groups of certified educators; the degree to which education professionals utilized interactive online technology applications and to determine if there was a significant difference between the different groups based…

40 CFR 420.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... best practicable control technology currently available. (a) Electric arc furnace steelmaking—semi-wet... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 420.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... best practicable control technology currently available. (a) Electric arc furnace steelmaking—semi-wet... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 420.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... best practicable control technology currently available. (a) Electric arc furnace steelmaking—semi-wet... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 430.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... effluent reduction attainable by the application of the best practicable control technology currently... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 420.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... best practicable control technology currently available. (a) Electric arc furnace steelmaking—semi-wet... degree of effluent reduction attainable by the application of the best practicable control technology... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 420.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... best available technology economically achievable. (a) Electric arc furnace steelmaking—semi-wet. No... degree of effluent reduction attainable by the application of the best available technology economically... application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125...

The business value of health care information technology.

PubMed

Frisse, M C

1999-01-01

The American health care system is one of the world's largest and most complex industries. The Health Care Financing Administration reports that 1997 expenditures for health care exceeded one trillion dollars, or 13.5 percent of the gross domestic product. Despite these expenditures, over 16 percent of the U.S. population remains uninsured, and a large percentage of patients express dissatisfaction with the health care system. Managed care, effective in its ability to attenuate the rate of cost increase, is associated with a concomitant degree of administrative overhead that is often perceived by providers and patients alike as a major source of cost and inconvenience. Both providers and patients sense a great degree of inconvenience and an excessive amount of paperwork associated with both the process of seeking medical care and the subsequent process of paying for medical services.

The Business Value of Health Care Information Technology

PubMed Central

Frisse, Mark C.

1999-01-01

The American health care system is one of the world's largest and most complex industries. The Health Care Financing Administration reports that 1997 expenditures for health care exceeded one trillion dollars, or 13.5 percent of the gross domestic product. Despite these expenditures, over 16 percent of the U.S. population remains uninsured, and a large percentage of patients express dissatisfaction with the health care system. Managed care, effective in its ability to attenuate the rate of cost increase, is associated with a concomitant degree of administrative overhead that is often perceived by providers and patients alike as a major source of cost and inconvenience. Both providers and patients sense a great degree of inconvenience and an excessive amount of paperwork associated with both the process of seeking medical care and the subsequent process of paying for medical services. PMID:10495096

Effects of thermally induced denaturation on technological-functional properties of whey protein isolate-based films.

PubMed

Schmid, M; Krimmel, B; Grupa, U; Noller, K

2014-09-01

This study examined how and to what extent the degree of denaturation affected the technological-functional properties of whey protein isolate (WPI)-based coatings. It was observed that denaturation affected the material properties of WPI-coated films significantly. Surface energy decreased by approximately 20% compared with native coatings. Because the surface energy of a coating should be lower than that of the substrate, this might result in enhanced wettability characteristics between WPI-based solution and substrate surface. Water vapor barrier properties increased by about 35% and oxygen barrier properties increased by approximately 33%. However, significant differences were mainly observed between coatings made of fully native WPI and ones with a degree of denaturation of 25%. Higher degrees of denaturation did not lead to further improvement of material properties. This observation offers cost-saving potential: a major share of denatured whey proteins may be replaced by fully native ones that are not exposed to energy-intensive heat treatment. Furthermore, native WPI solutions can be produced with higher dry matter content without gelatinizing. Hence, less moisture has to be removed through drying, resulting in reduced energy consumption. Copyright © 2014 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Student Engagement in First Year of an ICT Degree: Staff and Student Perceptions

ERIC Educational Resources Information Center

Sheard, Judy; Carbone, Angela; Hurst, A. J.

2010-01-01

This article reports on a study of student engagement in the first year of their undergraduate information and communication technology (ICT) degree at an Australian university. The study was conducted at Monash University in the four undergraduate ICT degrees of the Faculty of Information Technology. The study draws on data collected from staff…

40 CFR 440.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in subpart L of this part and 40 CFR 125.30 through... practicable control technology currently available (BPT): (a) The concentration of pollutants discharged in...

40 CFR 440.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in subpart L of this part and 40 CFR 125.30 through... practicable control technology currently available (BPT): (a) The concentration of pollutants discharged in...

40 CFR 440.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in subpart L of this part and 40 CFR 125.30 through... practicable control technology currently available (BPT): (a) The concentration of pollutants discharged in...

Parental Perceptions and Recommendations of Computing Majors: A Technology Acceptance Model Approach

ERIC Educational Resources Information Center

Powell, Loreen; Wimmer, Hayden

2017-01-01

Currently, there are more technology related jobs then there are graduates in supply. The need to understand user acceptance of computing degrees is the first step in increasing enrollment in computing fields. Additionally, valid measurement scales for predicting user acceptance of Information Technology degree programs are required. The majority…

40 CFR 430.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, any existing point... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 430.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, any existing point... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 430.112 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, any existing point... effluent reduction attainable by the application of the best practicable control technology currently...

Association between attendance and overall academic performance on a module within a professional pharmacy degree.

PubMed

Irwin, Nigel; Burnett, Kathryn M; McCarron, Paul A

2018-03-01

As the higher education (HE) classroom begins to adopt newer internet-based technologies, the relationship between attendance and performance needs to be re-evaluated, particularly for professional degree courses such as pharmacy. In the present study, we aimed to establish if an association exists between attendance at all timetabled classes and academic performance, in a Clinical Pharmacology and Therapeutics (CPT) module, as part of the Master of Pharmacy (MPharm) degree course at Ulster University. Data on attendance, final examination and coursework performance were collected over two academic years (2013-14 and 2014-15) of the CPT module at Ulster. In total 67 students were analysed. The MPharm degree at Ulster University implements an attendance policy, both as a pastoral support tool and to reinforce the need for professional conduct as a pharmacist. Student (2013-14 and 2014-15, n = 35 and 32, respectively) attendance on the module across both year groups was approximately 80%. We observed positive, and statistically significant relationships between attendance and performance on the examination, and especially in the coursework elements of the module. Student failure (below 40%) in the final examination was linked to attendance below an 80% threshold in nine of 12 cases. Reasons for not attending class varied, but illness was unquestionably the most commonly cited extenuation. Taken together, these data confirm a convincing association between student attendance and academic achievement. Our studies promote the use of attendance monitoring policies for professional degree courses such as pharmacy. Copyright © 2017 Elsevier Inc. All rights reserved.

International Collaboration Patterns and Effecting Factors of Emerging Technologies

PubMed Central

Bai, Xu; Liu, Yun

2016-01-01

With the globalization of the world economy, international innovation collaboration has taken place all over the world. This study selects three emerging technologies (3D printing, big data and carbon nanotubes and graphene technology) among 20 countries as the research objects, using three patent-based indicators and network relationship analysis to reflect international collaboration patterns. Then we integrate empirical analyses to show effecting factors of international collaboration degrees by using panel data. The results indicate that while 3D printing technology is associated with a “balanced collaboration” mode, big data technology is more accurately described by a radial pattern, centered on the United States, and carbon nanotubes and graphene technology exhibits “small-world” characteristics in this respect. It also shows that the factors GDP per capita (GPC), R&D expenditure (RDE) and the export of global trade value (ETV) negatively affect the level of international collaboration. It could be useful for China and other developing countries to make international scientific and technological collaboration strategies and policies in the future. PMID:27911926

Avionics Maintenance Technology Program Standards.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This publication contains statewide standards for the avionics maintenance technology program in Georgia. The standards are divided into the following categories: foundations, diploma/degree (philosophy, purpose, goals, program objectives, availability, evaluation); admissions, diploma/degree (admission requirements, provisional admission…

Interorganizational transfer of technology - A study of adoption of NASA innovations

NASA Technical Reports Server (NTRS)

Chakrabarti, A. K.; Rubenstein, A. H.

1976-01-01

The paper describes a study on the effects of top management support, various techno-economic factors, organizational climate, and decision-making modes on the adoption of NASA innovations. Field research consisted of interviews and questionnaires directed to sixty-five organizations. Forty-five test cases where different decisions for adoption of ideas for new products or processes were made on NASA Tech Briefs were studied in relation to the effects of various factors on the degree of success of adoption, including: (1) the degree of general connection of the technology to the firm's existing operation, (2) the specificity of the relationship between the technology and some existing and recognized problem, (3) the degree of urgency of the problem to which the technology was related, (4) maturity of technology available to implement the technology, (5) availability of personnel and financial resources to implement the technology, (6) degree of top management interest, (7) the use of confrontation in joint-decision, (8) the use of smoothing in decision-making, and (9) the use of forcing in decision-making. It was found that top managements interest was important in the product cases only, and that the success of process innovations was dependent on the quality of information and the specificity of the relationship between the technology and some recognized existing problem.

Durable pectin/chitosan membranes with self-assembling, water resistance and enhanced mechanical properties.

PubMed

Martins, Jéssica G; de Oliveira, Ariel C; Garcia, Patrícia S; Kipper, Matt J; Martins, Alessandro F

2018-05-15

Processing water-soluble polysaccharides, like pectin (PT), into materials with desirable stability and mechanical properties has been challenging. Here we report a new method to create water stable and mechanical resistant polyelectrolyte complex (PEC) membranes from PT and chitosan (CS) assemblies, without covalent crosslinking. This new method overcomes challenges of obtaining stable and durable complexes, by performing the complexation at low pH, enabling complex formation even when using an excess of PT, and when using PT with high degree of O-methoxylation. By performing the complexation at low pH, the complexes form with a high degree of intermolecular association, instead of forming by electrostatic complexation. This method avoids precipitation, and overcomes the aqueous instability typical of PT/CS complexes. After neutralization, the PEC membranes display features characteristic of a high degree of intermolecular association because of the self-assembling of polymer chains. The PT/CS ratio can be tuned to enhance the mechanical strength (σ = 39 MPa) of the membranes. These polysaccharide-based materials can demonstrate advantages over synthetic materials for technological applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

Increasing Opportunities for Low-Income Women and Student Parents in Science, Technology, Engineering, and Math at Community Colleges. Report #C388

ERIC Educational Resources Information Center

Costello, Cynthia B.

2012-01-01

Drawing on a literature and program review, analysis of publicly available data, and consultations with experts in the field, this report examines opportunities for women and student parents to pursue and succeed in STEM fields at community colleges. Findings include the following: (1) Women with associate's degrees earn only 77 percent of what…

A Feasibility Study to Assess Alternative Energy Program Development Potential at the Community College Level, October 1, 1983-June 30, 1984. Final Report.

ERIC Educational Resources Information Center

Blair, Brittain A.

In 1983-84, a feasibility study was conducted to determine the viability of establishing a comprehensive alternative energy technology program at Southeastern Illinois College (SIC). The study involved an examination of a number of exemplary associate degree programs in alternative energy, through on-site visits and telephone surveys; a survey of…

The Correlation between Attendance and Participation with Respect to Student Achievement in an Online Learning Environment

ERIC Educational Resources Information Center

Rapposelli, Joseph Anthony

2014-01-01

The recent and rapid growth of technology during the last several years has dramatically increased the number of new online degree programs and courses in the United States. As a result, enrollment into these online programs and courses has also increased. The United States Distance Learning Association (USDLA) estimated there was a total of 12.2…

Developing a Peace Course in Police Studies: How a Culture of Peace Can Enhance Police Legitimacy in a Democratic Society

ERIC Educational Resources Information Center

McDonald, James Russell

2015-01-01

This paper reflects my experiences developing a course within the Criminal Justice Technology Associates of Science degree program at Valencia College that fuses topics unique to peace and police studies. The key challenge in developing this course was in confronting the paradox of the police as instruments of both peace and conflict. In dealing…

Industry to Education Technical Transfer Program & Composite Materials. Composite Materials Course. Fabrication I Course. Fabrication II Course. Composite Materials Testing Course. Final Report.

ERIC Educational Resources Information Center

Massuda, Rachel

These four reports provide details of projects to design and implement courses to be offered as requirements for the associate degree program in composites and reinforced plastics technology. The reports describe project activities that led to development of curricula for four courses: composite materials, composite materials fabrication I,…

Design and Assessment of an Associate Degree-Level Plant Operations Technical Education Program

NASA Astrophysics Data System (ADS)

Selwitz, Jason Lawrence

Research was undertaken to develop and evaluate an associate degree-level technical education program in Plant Operations oriented towards training students in applied science, technology, engineering, and mathematics (STEM) skills and knowledge relevant to a spectrum of processing industries. This work focuses on four aspects of the curriculum and course development and evaluation research. First, the context of, and impetus for, what was formerly called vocational education, now referred to as technical or workforce education, is provided. Second, the research that was undertaken to design and evaluate an associate degree-level STEM workforce education program is described. Third, the adaptation of a student self-assessment of learning gains instrument is reviewed, and an analysis of the resulting data using an adapted logic model is provided, to evaluate the extent to which instructional approaches, in two process control/improvement-focused courses, were effective in meeting course-level intended learning outcomes. Finally, eight integrative multiscale exercises were designed from two example process systems, wastewater treatment and fast pyrolysis. The integrative exercises are intended for use as tools to accelerate the formation of an operator-technician's multiscale vision of systems, unit operations, underlying processes, and fundamental reactions relevant to multiple industries. Community and technical colleges serve a vital function in STEM education by training workers for medium- and high-skilled technical careers and providing employers the labor necessary to operate and maintain thriving business ventures. Through development of the curricular, course, and assessment-related instruments and tools, this research helps ensure associate degree-level technical education programs can engage in a continual process of program evaluation and improvement.

DeVry Institute of Technology: A Model for the 21st Century.

ERIC Educational Resources Information Center

Hallongren, Eugene G.

This presentation describes the DeVry Institute of Technology, a four-year, regionally accredited baccalaureate degree-granting institution that provides career-oriented degrees in business and technology to a diverse student population. DeVry has filled this niche for 70 years and now has 18 Institutes in the United States and Canada educating…

Research on PM2.5 time series characteristics based on data mining technology

NASA Astrophysics Data System (ADS)

Zhao, Lifang; Jia, Jin

2018-02-01

With the development of data mining technology and the establishment of environmental air quality database, it is necessary to discover the potential correlations and rules by digging the massive environmental air quality information and analyzing the air pollution process. In this paper, we have presented a sequential pattern mining method based on the air quality data and pattern association technology to analyze the PM2.5 time series characteristics. Utilizing the real-time monitoring data of urban air quality in China, the time series rule and variation properties of PM2.5 under different pollution levels are extracted and analyzed. The analysis results show that the time sequence features of the PM2.5 concentration is directly affected by the alteration of the pollution degree. The longest time that PM2.5 remained stable is about 24 hours. As the pollution degree gets severer, the instability time and step ascending time gradually changes from 12-24 hours to 3 hours. The presented method is helpful for the controlling and forecasting of the air quality while saving the measuring costs, which is of great significance for the government regulation and public prevention of the air pollution.

Assessment of brain-machine interfaces from the perspective of people with paralysis.

PubMed

Blabe, Christine H; Gilja, Vikash; Chestek, Cindy A; Shenoy, Krishna V; Anderson, Kim D; Henderson, Jaimie M

2015-08-01

One of the main goals of brain-machine interface (BMI) research is to restore function to people with paralysis. Currently, multiple BMI design features are being investigated, based on various input modalities (externally applied and surgically implantable sensors) and output modalities (e.g. control of computer systems, prosthetic arms, and functional electrical stimulation systems). While these technologies may eventually provide some level of benefit, they each carry associated burdens for end-users. We sought to assess the attitudes of people with paralysis toward using various technologies to achieve particular benefits, given the burdens currently associated with the use of each system. We designed and distributed a technology survey to determine the level of benefit necessary for people with tetraplegia due to spinal cord injury to consider using different technologies, given the burdens currently associated with them. The survey queried user preferences for 8 BMI technologies including electroencephalography, electrocorticography, and intracortical microelectrode arrays, as well as a commercially available eye tracking system for comparison. Participants used a 5-point scale to rate their likelihood to adopt these technologies for 13 potential control capabilities. Survey respondents were most likely to adopt BMI technology to restore some of their natural upper extremity function, including restoration of hand grasp and/or some degree of natural arm movement. High speed typing and control of a fast robot arm were also of interest to this population. Surgically implanted wireless technologies were twice as 'likely' to be adopted as their wired equivalents. Assessing end-user preferences is an essential prerequisite to the design and implementation of any assistive technology. The results of this survey suggest that people with tetraplegia would adopt an unobtrusive, autonomous BMI system for both restoration of upper extremity function and control of external devices such as communication interfaces.

Technology Alignment and Portfolio Prioritization (TAPP): Advanced Methods in Strategic Analysis, Technology Forecasting and Long Term Planning for Human Exploration and Operations, Advanced Exploration Systems and Advanced Concepts

NASA Technical Reports Server (NTRS)

Funaro, Gregory V.; Alexander, Reginald A.

2015-01-01

The Advanced Concepts Office (ACO) at NASA, Marshall Space Flight Center is expanding its current technology assessment methodologies. ACO is developing a framework called TAPP that uses a variety of methods, such as association mining and rule learning from data mining, structure development using a Technological Innovation System (TIS), and social network modeling to measure structural relationships. The role of ACO is to 1) produce a broad spectrum of ideas and alternatives for a variety of NASA's missions, 2) determine mission architecture feasibility and appropriateness to NASA's strategic plans, and 3) define a project in enough detail to establish an initial baseline capable of meeting mission objectives ACO's role supports the decision­-making process associated with the maturation of concepts for traveling through, living in, and understanding space. ACO performs concept studies and technology assessments to determine the degree of alignment between mission objectives and new technologies. The first step in technology assessment is to identify the current technology maturity in terms of a technology readiness level (TRL). The second step is to determine the difficulty associated with advancing a technology from one state to the next state. NASA has used TRLs since 1970 and ACO formalized them in 1995. The DoD, ESA, Oil & Gas, and DoE have adopted TRLs as a means to assess technology maturity. However, "with the emergence of more complex systems and system of systems, it has been increasingly recognized that TRL assessments have limitations, especially when considering [the] integration of complex systems." When performing the second step in a technology assessment, NASA requires that an Advancement Degree of Difficulty (AD2) method be utilized. NASA has used and developed or used a variety of methods to perform this step: Expert Opinion or Delphi Approach, Value Engineering or Value Stream, Analytical Hierarchy Process (AHP), Technique for the Order of Prioritization by Similarity to Ideal Solution (TOPSIS), and other multi­-criteria decision-making methods. These methods can be labor-intensive, often contain cognitive or parochial bias, and do not consider the competing prioritization between mission architectures. Strategic Decision-Making (SDM) processes cannot be properly understood unless the context of the technology is understood. This makes assessing technological change particularly challenging due to the relationships "between incumbent technology and the incumbent (innovation) system in relation to the emerging technology and the emerging innovation system." The central idea in technology dynamics is to consider all activities that contribute to the development, diffusion, and use of innovations as system functions. Bergek defines system functions within a TIS to address what is actually happening and has a direct influence on the ultimate performance of the system and technology development. ACO uses similar metrics and is expanding these metrics to account for the structure and context of the technology. At NASA technology and strategy is strongly interrelated. NASA's Strategic Space Technology Investment Plan (SSTIP) prioritizes those technologies essential to the pursuit of NASA's missions and national interests. The SSTIP is strongly coupled with NASA's Technology Roadmaps to provide investment guidance during the next four years, within a twenty-year horizon. This paper discusses the methods ACO is currently developing to better perform technology assessments while taking into consideration Strategic Alignment, Technology Forecasting, and Long Term Planning.

Ethical perspectives on emerging assistive technologies: insights from focus groups with stakeholders in long-term care facilities.

PubMed

Dorsten, Aimee-Marie; Sifford, K Susan; Bharucha, Ashok; Mecca, Laurel Person; Wactlar, Howard

2009-03-01

ASSISTIVE TECHNOLOGIES ARE RELATIVELY novel tools for research and daily care in long-term care (LTC) facilities that are faced with the burgeoning of the older adult population and dwindling staffing resources. The degree to which stakeholders in LTC facilities are receptive to the use of these technologies is poorly understood. Eighteen semi-structured focus groups and one interview were conducted with relevant groups of stakeholders at seven LTC facilities in southwestern Pennsylvania. Common themes identified across all focus groups centered on concerns for privacy, autonomy, cost, and safety associated with implementation of novel technologies. The relative importance of each theme varied by stakeholder group as well as the perceived severity of cognitive and/or physical disability. Our findings suggest that ethical issues are critical to acceptance of novel technologies by their end users, and that stakeholder groups are interdependent and require shared communication about the acceptance of these emerging technologies.

Gap analysis survey: an aid in transitioning to standardized curricula for nuclear medicine technology.

PubMed

Bires, Angela Macci; Mason, Donna L; Gilmore, David; Pietrzyk, Carly

2012-09-01

This article discusses the process by which the Society of Nuclear Medicine Technology Section (SNMTS) is assisting educators as they transition to comply with the fourth edition of the Curriculum Guide for Educational Programs in Nuclear Medicine Technology. An electronic survey was sent to a list of nuclear medicine technology programs compiled by the educational division of the SNMTS. The collected data included committee member demographics, goals and objectives, conference call minutes, consultation discussions, transition examples, 4- and 2-y program curricula, and certificate program curricula. There were 56 responses to the survey. All respondents were program directors, with 3 respondents having more than one type of program, for a total of 59 programs. Of these, 19 (33.93%) were baccalaureate, 19 (28.57%) associate, and 21 (37.5%) certificate. Forty-eight respondents (85.71%) had accreditation through the Joint Review Commission on Educational Programs in Nuclear Medicine Technology, 6 (10.71%) had regional accreditation, and 2 (3.57%) were accredited through other entities. Thirteen categories of required general education courses were identified, and the existing program curricula of 9 (69.2%) courses were more than 50% compliant with the fourth edition Curriculum Guide. The fact that no measurable gap could be found within the didactic professional content across programs was due to the lack of a degree requirement and content standardization within the profession. The data indicated that the participating programs offer a minimum of 1-15 contact hours in emerging technology modalities. The required clinical hours ranged from 765 to 1,920 for degree or certificate completion. The average number of clinical hours required for all programs was 1,331.69. Standardization of the number and types of courses is needed both for current baccalaureate programs and for clinical education. This standardization will guide programs in transitioning from a certificate or associate level to the baccalaureate level. The greatest obstacle is in expanding curricula to meet the recommendations of the fourth edition Curriculum Guide. Such expansion to entry-level competency may be met by incorporating hybrid imaging courses, secondary-level courses, and equivalency courses on the basic sciences and emerging technologies.

Policy Statements for the Associate Degree, the Associate in Applied Science Degree, and the Associate Degree in Nursing.

ERIC Educational Resources Information Center

American Association of Community and Junior Colleges, Washington, DC.

The policy statements contained in this document present the position of the American Association of Community and Junior Colleges (AACJC) on the Associate Degree, the Associate in Applied Science Degree (AAS), and the Associate Degree in Nursing. In its statement on the Associate Degree, the AACJC: (1) stresses the responsibility of faculty and…

Evaluation of CYP1A1 and CYP2B1/2 m-RNA induction in rat liver slices using the NanoString technology: a novel tool for drug discovery lead optimization.

PubMed

Palamanda, Jairam R; Kumari, Pramila; Murgolo, Nicholas; Benbow, Larry; Lin, Xinjie; Nomeir, Amin A

2009-08-01

Cytochrome P450 (CYP) induction in rodents and humans is considered a liability for new chemical entities (NCEs) in drug discovery. In particular, CYP1A1 and CYP2B1/2 have been associated with the induction of liver tumors in oncogenicity studies during safety evaluation studies of potential drugs. In our laboratory, real time PCR (Taqman) has been used to quantify the induction of rat hepatic CYP1A1 and CYP2B1/2 in precision -cut rat liver slices. A novel technology that does not require m-RNA isolation or RT-PCR, (developed by NanoString Technologies) has been investigated to quantify CYP1A1 and CYP2B1/2 induction in rat liver slices. Seventeen commercially available compounds were evaluated using both Taqman and NanoString technologies. Precision-cut rat liver slices were incubated with individual compounds for 24 hr at 37 degrees C in a humidified CO(2) incubator and CYP1A1 and CYP2B1/2 m-RNA were quantified. The results from the NanoString technology were similar to those of the Taqman(R) with a high degree of correlation for both CYP isoforms (r(2)>0.85). Therefore, NanoString provides an additional new technology to evaluate the induction of CYP1A1 and 2B1/2, as well as potentially other enzymes or transporters in rat liver slices.

Employer Perceptions of Associate Degrees in Local Labor Markets: A Case Study of the Employment of Information Technology Technicians in Detroit and Seattle. CCRC Working Paper No. 39

ERIC Educational Resources Information Center

Van Noy, Michelle; Jacobs, James

2012-01-01

While promoting postsecondary credential completion is a national priority intended to help graduates secure good jobs, the value of credentials in the labor market from the perspective of employers is not well understood. Specifically, more attention is needed to understand how credentials align with employer needs. Through in-depth interviews…

Persistence to Graduation of Four-Year University Native Students Compared to Community College Associate Degree Transfer Students by Academic Field and College Entrance Scores

ERIC Educational Resources Information Center

Tennant, Dennis

2013-01-01

The purpose of this descriptive causal-comparative study was to examine persistence to graduation of student cohorts with 60+ credit hours earned who are native to the university and transfer students coming into Tennessee Technological University with 60+ credit hours previously earned at a community college. Data were obtained for each student…

The Air Force Fitness Test: Creating New Fitness Assessment Charts Using Waist to Height Ratios

DTIC Science & Technology

2017-03-23

concurrence with their schedule, and the memo gave more direction to physical training leaders (PTLs). The memorandum provided training expectations for...van Leer, Seidell, and Lean (1995) concluded an increased cardiovascular disease risk is positively associated with waist circumference (Han, van...Air Force Institute of Technology Air University Air Education and Training Command In Partial Fulfillment of the Requirements for the Degree of

Wind Energy | Climate Neutral Research Campuses | NREL

Science.gov Websites

turbine or wind farm is one of the few technologies that supplies renewable energy at the scale required . Before determining whether a site is suitable for a wind turbine, read the Wind Energy Siting Handbook Community College has installed a wind turbine on site and now offers an Associate Degree in wind energy and

Information Technology Units in Bachelor Degree of Library and Information Science (LIS) Curriculum in Indonesia

ERIC Educational Resources Information Center

Anna, N. E. Variant

2011-01-01

The aim of this paper is to discover and describes the type of information technology (IT) units in bachelor degree of LIS education curriculum through the universities' official websites. This paper tries to find out what are the types of IT units in bachelor degree of LIS course in Indonesia. How does it fit the need of the information age? The…

Technology is a critical game changer to the practice of dental hygiene.

PubMed

Gadbury-Amyot, Cynthia C

2014-06-01

Dental hygienists will need to embrace 21st century technology to adapt to workplace settings. To stay relevant in the workforce, dental hygienists need mastery of new skills and technologies. The purpose of this paper is to elucidate the vast array of technological advances impacting dental practice and the consequent implications for oral health care providers. New technologies have provided unparalleled opportunities for degree and career advancement for dental hygienists. Advances in science and technology are providing patients with better quality and more convenient oral health care. Dental hygienists need technological skills that enable them to fully utilize technology as a strategy for consultation with dentists and other health care professionals and for other purposes. Continuing education and life-long learning factor into preparing dental hygienists for 21st century technologies. With technological advances, less adaptive professionals could potentially see a decrease in demand for their services. Possessing a high level of knowledge of dentistry and dental hygiene does not ensure a position in the workforce. Knowledge of technologies and associated skills are required for quality patient care and career and personal growth. Copyright © 2014 Elsevier Inc. All rights reserved.

Solar sail science mission applications and advancement

NASA Astrophysics Data System (ADS)

Macdonald, Malcolm; McInnes, Colin

2011-12-01

Solar sailing has long been envisaged as an enabling or disruptive technology. The promise of open-ended missions allows consideration of radically new trajectories and the delivery of spacecraft to previously unreachable or unsustainable observation outposts. A mission catalogue is presented of an extensive range of potential solar sail applications, allowing identification of the key features of missions which are enabled, or significantly enhance, through solar sail propulsion. Through these considerations a solar sail application-pull technology development roadmap is established, using each mission as a technology stepping-stone to the next. Having identified and developed a solar sail application-pull technology development roadmap, this is incorporated into a new vision for solar sailing. The development of new technologies, especially for space applications, is high-risk. The advancement difficulty of low technology readiness level research is typically underestimated due to a lack of recognition of the advancement degree of difficulty scale. Recognising the currently low technology readiness level of traditional solar sailing concepts, along with their high advancement degree of difficulty and a lack of near-term applications a new vision for solar sailing is presented which increases the technology readiness level and reduces the advancement degree of difficulty of solar sailing. Just as the basic principles of solar sailing are not new, they have also been long proven and utilised in spacecraft as a low-risk, high-return limited-capability propulsion system. It is therefore proposed that this significant heritage be used to enable rapid, near-term solar sail future advancement through coupling currently mature solar sail, and other, technologies with current solar sail technology developments. As such the near-term technology readiness level of traditional solar sailing is increased, while simultaneously reducing the advancement degree of difficulty along the solar sail application-pull technology development roadmap.

Evaluating Learners's Ability to Use Technology in Distance Education: The Case of External Degree Programme of the University of Nairobi

ERIC Educational Resources Information Center

Omito, Ouma

2016-01-01

The study was aimed at investigating the students' ability to use technology for distance education with specific reference to the University of Nairobi's External Degree Program. To achieve this, one specific objective was formulated: To find out the student teacher's readiness to accept and utilize technology for learning purposes in relation to…

An examination of the factors related to women's degree attainment and career goals in science, technology, and mathematics

NASA Astrophysics Data System (ADS)

Nitopi, Marie

During the last 30 years, women have made tremendous advances in educational attainment especially in post-secondary education. Despite these advances, recent researchers have revealed that women continue to remain underrepresented in attainment of graduate degrees in the sciences. The researcher's purpose in this study was to extend previous research and to develop a model of variables that significantly contribute to persistence in and attainment of a graduate degree and an eventual career in the science, mathematics, or technology professions. Data were collected from the Baccalaureate and Beyond Longitudinal Study (B&B:93/03). Variables in the categories of demographics, academics, finances, values and attitudes toward educational experiences, and future employment were analyzed by t tests and logistic regressions to determine gender differences in graduate degree attainment and career goals by male and female who majored in science, technology and mathematics. Findings supported significant gender differences in expectations for a graduate degree, age at baccalaureate degree attainment, number of science and engineering credits taken, and the value of faculty interactions. Father's education had a significant effect on degree attainment. Women and men had similar expectations at the beginning of their educational career, but women tended to fall short of their degree expectations ten years later. A large proportion of women dropped out of the science pipeline by choosing different occupations after degree completion. Additionally, women earned fewer science and math credits than men. The professions of science and technology are crucial for the nation's economic growth and competitiveness; therefore, additional researchers should focus on retaining both men and women in the STEM professions.

Design options for advanced manned launch systems

NASA Astrophysics Data System (ADS)

Freeman, Delma C.; Talay, Theodore A.; Stanley, Douglas O.; Lepsch, Roger A.; Wilhite, Alan W.

1995-03-01

Various concepts for advanced manned launch systems are examined for delivery missions to space station and polar orbit. Included are single-and two-stage winged systems with rocket and/or air-breathing propulsion systems. For near-term technologies, two-stage reusable rocket systems are favored over single-stage rocket or two-stage air-breathing/rocket systems. Advanced technologies enable viable single-stage-to-orbit (SSTO) concepts. Although two-stage rocket systems continue to be lighter in dry weight than SSTO vehicles, advantages in simpler operations may make SSTO vehicles more cost-effective over the life cycle. Generally, rocket systems maintain a dry-weight advantage over air-breathing systems at the advanced technology levels, but to a lesser degree than when near-term technologies are used. More detailed understanding of vehicle systems and associated ground and flight operations requirements and procedures is essential in determining quantitative discrimination between these latter concepts.

The role of the Department of Defense in PACS and telemedicine research and development.

PubMed

Mogel, Greg T

2003-01-01

The United States Department of Defense (DOD) has played a leading role in the movement of digital imaging, picture archiving and communications systems, and more recently telemedicine with its associated technologies into the mainstream of healthcare. Beginning in the 1980s with domestic implementations, and followed in the 1990s by both small and large-scale military deployments, these technologies have been put into action with varying degrees of success. These efforts however, have always served as a guidepost for similar civilian efforts and the establishment of a marketplace for the technologies. This paper examines the history of the DOD's role in these areas, the projects and programs established, assessing their current state of development and identifying the future direction of the DOD's research and implementation efforts in telemedicine and advanced medical technologies. Copyright 2002 Published by Elsevier Science Ltd.

40 CFR 467.43 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically achievable. [Reserved] 467.43 Section 467.43 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best available technology economically achievable. [Reserved] ...

40 CFR 467.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology currently available. [Reserved] 467.42 Section 467.42 Protection of Environment ENVIRONMENTAL PROTECTION... application of the best practicable control technology currently available. [Reserved] ...

A novel 360-degree shape measurement using a simple setup with two mirrors and a laser MEMS scanner

NASA Astrophysics Data System (ADS)

Jin, Rui; Zhou, Xiang; Yang, Tao; Li, Dong; Wang, Chao

2017-09-01

There is no denying that 360-degree shape measurement technology plays an important role in the field of threedimensional optical metrology. Traditional optical 360-degree shape measurement methods are mainly two kinds: the first kind, by placing multiple scanners to achieve 360-degree measurements; the second kind, through the high-precision rotating device to get 360-degree shape model. The former increases the number of scanners and costly, while the latter using rotating devices lead to time consuming. This paper presents a low cost and fast optical 360-degree shape measurement method, which possesses the advantages of full static, fast and low cost. The measuring system consists of two mirrors with a certain angle, a laser projection system, a stereoscopic calibration block, and two cameras. And most of all, laser MEMS scanner can achieve precise movement of laser stripes without any movement mechanism, improving the measurement accuracy and efficiency. What's more, a novel stereo calibration technology presented in this paper can achieve point clouds data registration, and then get the 360-degree model of objects. A stereoscopic calibration block with special coded patterns on six sides is used in this novel stereo calibration method. Through this novel stereo calibration technology we can quickly get the 360-degree models of objects.

A Novel Supercritical Fluid-Assisted Fabrication Technique for Producing Transparent Nanocomposites

DTIC Science & Technology

2013-10-03

period with a degree in science, mathematics, engineering, or technology fields: The number of undergraduates funded by your agreement who graduated...during this period and will continue to pursue a graduate or Ph.D. degree in science, mathematics, engineering, or technology fields: Number of...fellowships for further studies in science, mathematics, engineering or technology fields: 1.00 0.00 1.00 0.00 0.00 0.00

40 CFR 429.63 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wet Process... by the application of the best available technology economically achievable (BAT). [Reserved] ...

40 CFR 427.53 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Millboard... by the application of the best available technology economically achievable. The following...

40 CFR 411.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY Nonleaching... by the application of the best available technology economically achievable. The following...

40 CFR 427.103 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Vapor Absorption... by the application of the best available technology economically achievable. The following...

40 CFR 427.63 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Roofing... by the application of the best available technology economically achievable. The following...

40 CFR 455.64 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PESTICIDE CHEMICALS Repackaging of Agricultural Pesticides... effluent reduction attainable by the application of the best available technology economically achievable...

Adoption and Use of Digital Technologies among General Dental Practitioners in the Netherlands

PubMed Central

van der Zande, Marieke M.; Gorter, Ronald C.; Aartman, Irene H. A.; Wismeijer, Daniel

2015-01-01

Objectives To investigate (1) the degree of digital technology adoption among general dental practitioners, and to assess (2) which personal and practice factors are associated with technology use. Methods A questionnaire was distributed among a stratified sample of 1000 general dental practitioners in the Netherlands, to measure the use of fifteen administrative, communicative, clinical and diagnostic technologies, as well as personal factors and dental practice characteristics. Results The response rate was 31.3%; 65.1% replied to the questionnaire on paper and 34.9% online. Each specific digital technology was used by between 93.2% and 6.8% of the dentists. Administrative technologies were generally used by more dentists than clinical technologies. Dentists had adopted an average number of 6.3±2.3 technologies. 22.5% were low technology users (0 to 4 technologies), 46.2% were intermediate technology users (5 to 7 technologies) and 31.3% were high technology users (8 to12 technologies). High technology users more frequently had a specialization (p<0.001), were younger on average (p=0.024), and worked more hours per week (p=0.003) than low technology users, and invested more hours per year in professional activities (p=0.026) than intermediate technology users. High technology use was also more common for dentists working in practices with a higher average number of patients per year (p<0.001), with more dentists working in the practice (p<0.001) and with more staff (p<0.001). Conclusion With few exceptions, all dentists use some or a substantial number of digital technologies. Technology use is associated with various patterns of person-specific factors, and is higher when working in larger dental practices. The findings provide insight into the current state of digital technology adoption in dental practices. Further exploration why some dentists are more reluctant to adopt technologies than others is valuable for the dental profession’s agility in adjusting to technological developments. PMID:25811594

Patents related to the treatment and diagnosis of bruxism.

PubMed

Felicíssimo, Kenya; Quintella, Cristina; Stuginski-Barbosa, Juliana; Salles, Cristina; Rangel, Flora; Barreto, Leandro

2018-06-06

Bruxism is among the most chronic dental problems worldwide, and its perception may increase indicatively the condition of people's health, avoiding future health problems. Technologic solutions have improved considerably due to new diagnostic and treatment technologies and their automation. This review aims to assess therapeutic methods for bruxism through analysis of patent applications spanning recent decades. Areas covered: Patent families of bruxism, and products available on the market. Data were obtained through Questel Orbit from the European Patent Office on a worldwide basis using Cooperative Patent Classification (CPC), analyzing 134 patent families. The products on the market were mapped and classified as used for diagnosis, treatment or both. Expert opinion: This technological prospect has shown that the technological field of bruxism is growing toward smaller, automated devices; there is still no predominant owner of the technologies. Products are expected to provide home use with a high degree of reliability and specificity, using the Internet of Things (telemedicine associated with industry 4.0) and enabling real-time diagnosis.

40 CFR 469.15 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Semiconductor... application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125...

40 CFR 424.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Electric... available technology economically achievable. The following limitations establish the quantity or quality of...

40 CFR 469.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... attainable by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 469.14 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Electronic... by the application of the best available technology economically achievable (BAT). Except as provided...

40 CFR 458.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 458.32 Section 458.32 Protection of Environment ENVIRONMENTAL PROTECTION... Carbon Black Channel Process Subcategory § 458.32 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology...

40 CFR 458.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 458.22 Section 458.22 Protection of Environment ENVIRONMENTAL PROTECTION... Carbon Black Thermal Process Subcategory § 458.22 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology...

40 CFR 429.53 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... best available technology economically achievable (BAT): There shall be no discharge of process... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Dry Process Hardboard...

40 CFR 429.51 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... application of the best practicable control technology (BPT): There shall be no discharge of process... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Dry Process...

40 CFR 420.137 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best control technology for... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY... effluent reduction attainable by the application of the best control technology for conventional pollutants...

40 CFR 427.73 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ASBESTOS MANUFACTURING POINT SOURCE CATEGORY Asbestos Floor... attainable by the application of the best available technology economically achievable. The following...

40 CFR 411.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CEMENT MANUFACTURING POINT SOURCE CATEGORY Leaching Subcategory... application of the best available technology economically achievable. The following limitations establish the...

40 CFR 455.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology (BCT). [Reserved] 455.33 Section 455.33 Protection of Environment ENVIRONMENTAL... Chemicals Manufacturing Subcategory § 455.33 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best conventional pollutant control technology (BCT...

40 CFR 429.171 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Furniture... best practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30...

40 CFR 429.163 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Furniture... application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125...

40 CFR 429.173 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best available technology economically... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Furniture... best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through...

40 CFR 429.161 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Furniture... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 443.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (TARS AND ASPHALT) POINT SOURCE CATEGORY Asphalt Concrete Subcategory § 443.23 Effluent limitations... technology economically achievable. The following limitations establish the quantity or quality of pollutants...

40 CFR 410.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Woven Fabric Finishing... application of the best practicable control technology currently available (BPT). (a) Except as provided in 40...

40 CFR 410.82 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Nonwoven Manufacturing... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 410.92 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Felted Fabric Processing... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 410.62 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Carpet Finishing... application of the best practicable control technology currently available (BPT). (a) Except as provided in 40...

40 CFR 410.12 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Wool Scouring Subcategory... application of the best practicable control technology currently available (BPT). (a) Except as provided in 40...

40 CFR 410.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Wool Finishing Subcategory... application of the best practicable control technology currently available (BPT). (a) Except as provided in 40...

40 CFR 469.29 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best conventional pollution control... by the application of the best conventional pollution control technology (BCT). Except as provided in... of the best conventional pollution control technology (BCT): Subpart B—Electronic Crystals BCT...

40 CFR 469.15 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... by the application of the best available technology economically achievable (BAT). Except as provided...

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Electronic... by the application of the best available technology economically achievable (BAT). Except as provided...

40 CFR 469.15 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY Semiconductor... application of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125...

40 CFR 469.14 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 469.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 469.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 424.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Electric... available technology economically achievable. The following limitations establish the quantity or quality of...

40 CFR 424.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Electric... available technology economically achievable. The following limitations establish the quantity or quality of...

40 CFR 424.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Electric... available technology economically achievable. The following limitations establish the quantity or quality of...

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... attainable by the application of the best available technology economically achievable (BAT). Except as...

40 CFR 469.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2013 CFR

2013-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 469.14 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 469.14 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2014 CFR

2014-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE... reduction attainable by the application of the best practicable control technology currently available (BPT...

40 CFR 469.25 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... attainable by the application of the best available technology economically achievable (BAT). Except as...

40 CFR 469.24 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... attainable by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 469.15 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2012 CFR

2012-07-01

... degree of effluent reduction attainable by the application of the best available technology economically...) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... by the application of the best available technology economically achievable (BAT). Except as provided...

40 CFR 424.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Covered Electric... available technology economically achievable. The following limitations establish the quantity or quality of...

40 CFR 469.14 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ELECTRICAL AND ELECTRONIC COMPONENTS POINT SOURCE CATEGORY... by the application of the best practicable control technology currently available (BPT). Except as...

40 CFR 463.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY Contact... effluent reduction attainable by the application of the best available technology economically achievable...

Educational technology usage and needs of science education in Turkey

NASA Astrophysics Data System (ADS)

Turkmen, Hakan

The purpose of this study was to examine Turkish science teachers and pre-service teachers' attitudes towards the use of technological tools in their science lessons in Turkish colleges of education in the assist of Turkish government projects, and how science education teachers, who have earned a science education degree from western countries, influence the use technology in Turkish higher education. The research method employed were quantitative data sources, including a technology background questionnaire, which is cross-sectional design, and qualitative historical research data sources. The study analyzed the data under a cross-section or between subjects' method with four factors: Turkish science teachers; Turkish pre-service science teachers; Turkish science teachers who have earned science degrees from western universities; and Turkish graduate students whose majors are in science education in U.S. It was anticipated that an analysis of variance (ANOVA) would be used to analyze data and "level 0.05" was established. Major findings of the study include: (1) Science education faculty members who have earned science education degrees from western countries have a positive effect on the use of technological tools in science courses in Turkish higher education. (2) Science education faculty members who have earned science degrees from Turkish universities have a limited knowledge on the use of technological tools in science courses in Turkish higher education. (3) Science education graduate students who have been studying in science education in western countries have positive attitudes for the use of technological tools in science courses have potential to impact Turkish higher education, when they return to Turkey. (4) Most Turkish pre-service teachers know very little about effective use of technology in education. Gender differences are apparent and females consistently indicated that they knew less and hence may not integrate technological tools in their teaching. (5) Turkish pre-service or new teachers are exposed to teacher educators that do not sufficiently model the appropriate use of computers for instructional purposes, either in courses or in field experiences. The technology that is used focuses more on older and simpler instructional applications of computer technology (e.g., computer assisted instruction, word processing) and older educational technologies (e.g., overhead projectors, calculators, slides). (6) Faculty rank in general, made little vis-a-vis technology use in knowledge. Integrating technology into teaching and learning in Turkish education is a slow, time-consuming process that requires substantial levels of support and encouragement and requires patience and understanding. In light of efforts by the Turkish government, Turkish faculty members who earned their degrees from western universities, and graduate students earning degrees from American universities will be leaders on the long road to change.

Dual axis operation of a micromachined rate gyroscope

DOE Office of Scientific and Technical Information (OSTI.GOV)

Juneau, T.; Pisano, A.P.; Smith, J.

Since micromachining technology has raised the prospect of fabricating high performance sensors without the associated high cost and large size, many researchers have investigated micromachined rate gyroscopes. The vast majority of research has focused on single input axis rate gyroscopes, but this paper presents work on a dual input axis micromachined rate gyroscope. The key to successful simultaneous dual axis operation is the quad symmetry of the circular oscillating rotor design. Untuned gyroscopes with mismatched modes yielded random walk as low as 10{degrees}/{radical}hour with cross sensitivity ranging from 6% to 16%. Mode frequency matching via electrostatic tuning allowed performance bettermore » than 2{degrees}/{radical}hour, but at the expense of excessive cross sensitivity.« less

STARS: The Space Transportation Architecture Risk System

NASA Technical Reports Server (NTRS)

Greenberg, Joel S.

1997-01-01

Because of the need to perform comparisons between transportation systems that are likely to have significantly different levels of risk, both because of differing degrees of freedom in achieving desired performance levels and their different states of development and utilization, an approach has been developed for performing early comparisons of transportation architectures explicitly taking into account quantitative measures of uncertainty and resulting risk. The approach considers the uncertainty associated with the achievement of technology goals, the effect that the achieved level of technology will have on transportation system performance and the relationship between transportation system performance/capability and the ability to accommodate variations in payload mass. The consequences of system performance are developed in terms of expected values and associated standard deviations of nonrecurring, recurring and the present value of transportation system life cycle cost. Typical results are presented to illustrate the application of the methodology.

Creating Nanotechnicians for the 21st Century Workplace

NASA Astrophysics Data System (ADS)

Burke, Michael; Jean, Kristi; Brown, Cheryl; Barrett, Rick; Leopold, Carrie

The North Dakota State College of Science (NDSCS) Nanoscience Technology Training Program was designed and implemented to meet the growing demand for technicians skilled in nanofabrication, surface analysis and production of various micro and nano-scale products. The program emphasizes hands-on training and utilizes a state-of-the-art Applied Science and Advanced Manufacturing Training Laboratory to develop the KSA’s (knowledge, skills, attitudes) needed by industry. Two-year Associate in Applied Science degree, diploma and certificate tracks are offered in four industry focus areas; nanotechnology, microelectronics technology, bio-fuels technology and biotechnology. Students learn to work in multidisciplinary teams on design, prototyping, analysis and manufacturing processes of products. The program also hosts an extensive hands-on outreach program which interacted with over 8000 secondary school science students and 500 teachers in the first 12 months of operation.

40 CFR 423.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS STEAM ELECTRIC POWER GENERATING POINT SOURCE CATEGORY § 423.13... of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30...

40 CFR 445.13 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... limitations which represent the application of BAT: Limitations for ammonia (as N), a-terpineol, aniline... degree of effluent reduction attainable by the application of best available technology economically... application of best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30...

40 CFR 440.142 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Gold Placer Mine... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

First Year Courses in IT: A Bloom Rating

ERIC Educational Resources Information Center

Oliver, Dave; Dobele, Tony

2007-01-01

This paper explores the cognitive difficulty of assessment tasks in six first year computing courses within an Information Technology (IT) degree. This issue is pertinent to Information Technology education for two reasons. Degree level education in any field of study is expected to develop higher order thinking skills. Bloom's taxonomy is a…

Engaging with Employers in Work-Based Learning: A Foundation Degree in Applied Technology

ERIC Educational Resources Information Center

Benefer, Richard

2007-01-01

Purpose: This paper aims to describe the work of Staffordshire University in engaging with local employers and local further education colleges in the development of a Foundation Degree in Applied Technology. Design/methodology/approach: Following an outline of current government policy in employer engagement, the paper identifies--from the…

40 CFR 410.72 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Stock and Yarn Finishing... application of the best practicable control technology currently available (BPT). (a) Except as provided in 40...

40 CFR 469.19 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best conventional pollution control... application of the best conventional pollution control technology (BCT). Except as provided in 40 CFR 125.30... conventional pollution control technology (BCT): Subpart A—Semiconductor BCT Effluent Limitations Pollutant or...

40 CFR 423.13 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS STEAM ELECTRIC POWER GENERATING POINT SOURCE CATEGORY § 423.13... of the best available technology economically achievable (BAT). Except as provided in 40 CFR 125.30...

Decentralized peri-urban wastewater treatment technologies assessment integrating sustainability indicators.

PubMed

Mena-Ulecia, Karel; Hernández, Heykel Hernández

2015-01-01

Selection of treatment technologies without considering the environmental, economic and social factors associated with each geographical context risks the occurrence of negative impacts that were not properly foreseen, working against the sustainable performance of the technology. The principal aim of this study was to evaluate 12 technologies for decentralized treatment of domestic wastewater applicable to peri-urban communities using sustainability approaches and, at the same time, continuing a discussion about how to address a more integrated assessment of overall sustainability. For this, a set of 13 indicators that embody the environmental, economic and social approach for the overall sustainability assessment were used by means of a target plot diagram as a tool for integrating indicators that represent a holistic analysis of the technologies. The obtained results put forward different degrees of sustainability, which led to the selection of: septic tank+land infiltration; up-flow anaerobic reactor+high rate trickling filter and septic tank+anaerobic filter as the most sustainable and attractive technologies to be applied in peri-urban communities, according to the employed indicators.

Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

ERIC Educational Resources Information Center

Marmaras, Judy; Neri, Pat

The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…

Baccalaureate Degrees at Ontario Colleges: Issues and Implications

ERIC Educational Resources Information Center

Panacci, Adam G.

2014-01-01

This paper identifies and examines major issues and implications of the proposal to substantially increase the number of applied baccalaureate degrees offered by Ontario's Colleges of Applied Arts and Technology, including increasing four-year applied degree offerings and introducing three-year applied degrees. Currently, provincial legislation…

The Influence of Academic Momentum and Associate Degree Credit Requirements on Community College Student Degree Completion

ERIC Educational Resources Information Center

Knox, Daniel

2017-01-01

This study addresses gaps in the theoretical and policy literature by examining the relationship between associate degree program credit requirements and four student outcomes: associate degree attainment, time to degree, final associate degree grade point average, and persistence. Using student unit record data, a longitudinal quantitative study…

Assessment of brain-machine interfaces from the perspective of people with paralysis

NASA Astrophysics Data System (ADS)

Blabe, Christine H.; Gilja, Vikash; Chestek, Cindy A.; Shenoy, Krishna V.; Anderson, Kim D.; Henderson, Jaimie M.

2015-08-01

Objective. One of the main goals of brain-machine interface (BMI) research is to restore function to people with paralysis. Currently, multiple BMI design features are being investigated, based on various input modalities (externally applied and surgically implantable sensors) and output modalities (e.g. control of computer systems, prosthetic arms, and functional electrical stimulation systems). While these technologies may eventually provide some level of benefit, they each carry associated burdens for end-users. We sought to assess the attitudes of people with paralysis toward using various technologies to achieve particular benefits, given the burdens currently associated with the use of each system. Approach. We designed and distributed a technology survey to determine the level of benefit necessary for people with tetraplegia due to spinal cord injury to consider using different technologies, given the burdens currently associated with them. The survey queried user preferences for 8 BMI technologies including electroencephalography, electrocorticography, and intracortical microelectrode arrays, as well as a commercially available eye tracking system for comparison. Participants used a 5-point scale to rate their likelihood to adopt these technologies for 13 potential control capabilities. Main Results. Survey respondents were most likely to adopt BMI technology to restore some of their natural upper extremity function, including restoration of hand grasp and/or some degree of natural arm movement. High speed typing and control of a fast robot arm were also of interest to this population. Surgically implanted wireless technologies were twice as ‘likely’ to be adopted as their wired equivalents. Significance. Assessing end-user preferences is an essential prerequisite to the design and implementation of any assistive technology. The results of this survey suggest that people with tetraplegia would adopt an unobtrusive, autonomous BMI system for both restoration of upper extremity function and control of external devices such as communication interfaces.

High performance structural laminate composite material for use to 1000.degree. F. and above, apparatus for and method of manufacturing same, and articles made with same

NASA Technical Reports Server (NTRS)

Seal, Ellis C. (Inventor); Biggs, Jr., Robert William (Inventor); Bodepudi, Venu Prasad (Inventor); Cranston, John A. (Inventor)

2003-01-01

A novel materials technology has been developed and demonstrated for providing a high modulus composite material for use to 1000.degree. F. and above. This material can be produced at 5-20% of the cost of refractory materials, and has higher structural properties. This technology successfully resolves the problem of thermal shock or ply lift, which limits traditional high temperature laminates (such as graphite/polyimide and graphite/phenolic) to temperatures of 550-650.degree. F. in thicker (0.25 and above) laminates. The technology disclosed herein is an enabling technology for the nose for the External Tank (ET) of the Space Shuttle, and has been shown to be capable of withstanding the severe environments encountered by the nose cone through wind tunnel testing, high temperature subcomponent testing, and full scale structural, dynamic, acoustic, and damage tolerance testing.

Distance Education: Faculty and Administrators' Perceptions of the Degree of Technology Infusion

ERIC Educational Resources Information Center

Snell, Michelle D.

2007-01-01

This researcher examined the five attributes of Rogers Diffusion of Innovation. Perceptions of the degree of the infusion of technology and distance education were analyzed using Rogers (1995) five attributes. A survey was used together with the data from faculty and administrators of a community college with a distance education program that has…

40 CFR 434.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... NEW SOURCE PERFORMANCE STANDARDS Acid or Ferruginous Mine Drainage § 434.33 Effluent limitations... technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, 40 CFR 401.17, and...

40 CFR 434.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Acid or Ferruginous Mine Drainage § 434.33 Effluent... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, 40 CFR 401...

40 CFR 434.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Alkaline Mine Drainage § 434.43 Effluent limitations... technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, and §§ 434.61 and 434...

40 CFR 434.43 - Effluent limitations guidelines representing the degree of effluent reduction attainable by...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by application of the best available technology... LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Alkaline Mine Drainage § 434.43 Effluent limitations... technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, and §§ 434.61 and 434...

40 CFR 434.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Acid or Ferruginous Mine Drainage § 434.33 Effluent... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, 40 CFR 401...

40 CFR 434.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... LIMITATIONS AND NEW SOURCE PERFORMANCE STANDARDS Acid or Ferruginous Mine Drainage § 434.33 Effluent... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, 40 CFR 401...

40 CFR 434.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... NEW SOURCE PERFORMANCE STANDARDS Acid or Ferruginous Mine Drainage § 434.33 Effluent limitations... technology economically achievable (BAT). Except as provided in 40 CFR 125.30-125.32, 40 CFR 401.17, and...

Assessment of Industrial Attachment: Issues and Concerns of Chinhoyi University of Technology's Undergraduate Degree Programme, Zimbabwe

ERIC Educational Resources Information Center

Chinyemba, Fredreck; Bvekerwa, Sailos T.

2012-01-01

This article presents findings from an action research that explored industrial attachment supervision and assessment issues and concerns of CUT's (Chinhoyi University of Technology) undergraduate degree programme. The study was motivated by the observation that there is no research project contacted in order to determine the social and economic…

Improving Access to the Baccalaureate: Articulation Agreements and the National Science Foundation's Advanced Technological Education Program

ERIC Educational Resources Information Center

Zinser, Richard W.; Hanssen, Carl E.

2006-01-01

This article presents an analysis of national data from the Advanced Technological Education (ATE) program regarding articulation agreements for the transfer of 2-year technical degrees to baccalaureate degrees. Quantitative and qualitative data are illustrated to help explain the extent to which ATE projects improve access to universities for…

Review of the National Defense Intelligence College's Master's Degree in Science and Technology Intelligence

ERIC Educational Resources Information Center

National Academies Press, 2011

2011-01-01

The National Research Council (NRC) was asked by the National Defense Intelligence College (NDIC) to convene a committee to review the curriculum and syllabi for their proposed master of science degree in science and technology intelligence. The NRC was asked to review the material provided by the NDIC and offer advice and recommendations…

Tools to Use in an Information Technology Class--and Best of All They Are FREE!

ERIC Educational Resources Information Center

Swanson, Dewey; Gusev, Dmitri A.

2016-01-01

Purdue Polytechnic has several locations in the state of Indiana offering students a chance to get a Purdue degree. The Computer and Information Technology (CIT) department offers the CIT degree at three sites in Indiana: Anderson, Columbus and Kokomo. CIT offers several potential majors including Cybersecurity, Network Engineering, Systems…

40 CFR 420.03 - Alternative effluent limitations representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technology currently available, best available technology economically achievable, best available demonstrated control technology, and best conventional pollutant control technology (the âwater bubbleâ). 420... of best practicable control technology currently available, best available technology economically...

40 CFR 420.03 - Alternative effluent limitations representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology currently available, best available technology economically achievable, best available demonstrated control technology, and best conventional pollutant control technology (the âwater bubbleâ). 420... of best practicable control technology currently available, best available technology economically...

40 CFR 420.03 - Alternative effluent limitations representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available, best available technology economically achievable, best available demonstrated control technology, and best conventional pollutant control technology (the âwater bubbleâ). 420... of best practicable control technology currently available, best available technology economically...

Optics and communication technology major of physics undergraduate degree at King Mongkut's Institute of Technology Ladkrabang

NASA Astrophysics Data System (ADS)

Buranasiri, Prathan

2014-09-01

A physics undergraduate degree major in optics and communication technology has been offered at King Mongkut's Institute of Technology Ladkrabang (KMITL), Bangkok, Thailand. There are nine required three credit hour courses including two laboratory courses plus a number of selections in optics and communication based technology courses. For independent thinking and industrial working skills, nine credit hours of research project, practical training or overseas studies are included for selection in the final semester. Students are encouraged to participate in international conferences and professional organizations. Recently the program, with support from SPIE and OSA, has organized its first international conference on photonic solutions 2013 (ICPS 2013).

Educating Physicists for the 21st Century Industrial Arena

NASA Astrophysics Data System (ADS)

Levine, Alaina G.

2001-03-01

At the University of Arizona, a new Professional Master's Degree in Applied and Industrial Physics has been initiated to meet the demands of a new industrial era. A 1995 report by the National Academy of Sciences, et al, concluded, "A world of work that has become more interdisciplinary, collaborative, and global requires that we produce young people who are adaptable and flexible, as well as technically proficient." To better prepare students for this new "world of work", a new degree was launched in 2000 sponsored by the Sloan Foundation as part of a national initiative. The Professional Master's Degree in Applied and Industrial Physics educates students to 1) work in interdisciplinary teams on complex problems involving rapidly changing science and technology, 2) gain proficiency in computational techniques, 3) effectively communicate their scientific mission at all levels, and 4) understand business and legal issues associated with their scientific projects. I will discuss these goals, the roles of our industrial partners, and Arizona's parallel programs in Applied Biosciences and Mathematical Sciences.

Feasibility study of tank leakage mitigation using subsurface barriers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Treat, R.L.; Peters, B.B.; Cameron, R.J.

1994-09-21

The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulatingmore » air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.« less

[The method and application to construct experience recommendation platform of acupuncture ancient books based on data mining technology].

PubMed

Chen, Chuyun; Hong, Jiaming; Zhou, Weilin; Lin, Guohua; Wang, Zhengfei; Zhang, Qufei; Lu, Cuina; Lu, Lihong

2017-07-12

To construct a knowledge platform of acupuncture ancient books based on data mining technology, and to provide retrieval service for users. The Oracle 10 g database was applied and JAVA was selected as development language; based on the standard library and ancient books database established by manual entry, a variety of data mining technologies, including word segmentation, speech tagging, dependency analysis, rule extraction, similarity calculation, ambiguity analysis, supervised classification technology were applied to achieve text automatic extraction of ancient books; in the last, through association mining and decision analysis, the comprehensive and intelligent analysis of disease and symptom, meridians, acupoints, rules of acupuncture and moxibustion in acupuncture ancient books were realized, and retrieval service was provided for users through structure of browser/server (B/S). The platform realized full-text retrieval, word frequency analysis and association analysis; when diseases or acupoints were searched, the frequencies of meridian, acupoints (diseases) and techniques were presented from high to low, meanwhile the support degree and confidence coefficient between disease and acupoints (special acupoint), acupoints and acupoints in prescription, disease or acupoints and technique were presented. The experience platform of acupuncture ancient books based on data mining technology could be used as a reference for selection of disease, meridian and acupoint in clinical treatment and education of acupuncture and moxibustion.

Electro-Optics In Two Years

NASA Astrophysics Data System (ADS)

Simcik, John C.

1989-04-01

Texas State Technical Institute-Waco (TSTI-WACO) was the first school in the United States to offer an Associate of Applied Science degree in Laser Electro-Optics Technology. The program began in September 1969 and has produced 1,827 graduates since inception. These graduates are readily adaptable to any area of the laser electro-optics industry. Areas of study include Optics, Electronics, Vacuum, Physics, Mathematics, and English with emphasis on Electro-Optics. Graduate placement is centered around research and development, life sciences and manufacturing in technical and engineering areas.

Impact accelerations

NASA Technical Reports Server (NTRS)

Vongierke, H. E.; Brinkley, J. W.

1975-01-01

The degree to which impact acceleration is an important factor in space flight environments depends primarily upon the technology of capsule landing deceleration and the weight permissible for the associated hardware: parachutes or deceleration rockets, inflatable air bags, or other impact attenuation systems. The problem most specific to space medicine is the potential change of impact tolerance due to reduced bone mass and muscle strength caused by prolonged weightlessness and physical inactivity. Impact hazards, tolerance limits, and human impact tolerance related to space missions are described.

Map of Martian Potassium at Mid-Latitudes

NASA Technical Reports Server (NTRS)

2003-01-01

This gamma ray spectrometer map of the mid-latitude region of Mars is based on gamma-rays from the element potassium. Potassium, having the chemical symbol K, is a naturally radioactive element and is a minor constituent of rocks on the surface of both Mars and Earth. The region of highest potassium content, shown in red, is concentrated in the northern part of Acidalia Planitia (centered near 55 degrees N, -30 degrees). Several areas of low potassium content, shown in blue, are distributed across the mid-latitudes, with two significant low concentrations, one associated with the Hellas Basin (centered near 35 degrees S, 70 degrees) and the other lying southeast of Elysium Mons (centered near 10 degrees N, 160 degrees). Contours of constant surface elevation are also shown. The long continuous line running from east to west marks the approximate separation of the younger lowlands in the north from the older highlands in the south.

NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The gamma ray spectrometer was provided by the University of Arizona, Tucson. Lockheed Martin Astronautics, Denver, is the prime contractor for the project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

Evaluation in STEM Online Graduate Degree Programs in Agricultural Sciences and Engineering

ERIC Educational Resources Information Center

Downs, Holly A.

2014-01-01

Demands for online graduate degrees have increased pressure on universities to launch web degrees quickly and, at times, without attending to their quality. Scarce research exists identifying what evaluation activities are being done by science, technology, engineering, and mathematics (STEM) online graduate degree programs that are accustomed to…

Facilitating Timely Completion of a College Degree with Optimization Technology

ERIC Educational Resources Information Center

Dechter, Avi

2009-01-01

Students who pursue a bachelor's degree in four-year colleges and universities often take longer than four years to complete their degrees. The reasons for prolonging the time to degree seem to fall into three broad categories: part-time enrollment, deficiencies in academic readiness, and inadequate course planning. This paper focuses on the…

Effluent Treatment Technologies in the Iron and Steel Industry - A State of the Art Review.

PubMed

Das, Pallabi; Mondal, Gautam C; Singh, Siddharth; Singh, Abhay K; Prasad, Bably; Singh, Krishna K

2018-05-01

  Iron and steel industry is the principal driving force propelling economic and technological growth of a nation. However, since its inception this industry is associated with widespread environmental pollution and enormous water consumption. Different units of a steel plant discharge effluents loaded with toxic, hazardous pollutants, and unutilized components which necessitates mitigation. In this paper, pollutant removal efficiency, effluent volume product quality, and economic feasibility of existing treatments are studied vis-à-vis their merits, demerits, and innovations to access their shortcomings which can be overcome with new technology to identify future research directions. While conventional methods are inadequate for complete remediation and water reclamation, the potential of advanced treatments, like membrane separation, remains relatively untapped. It is concluded that integrated systems combining membrane separation with chemical treatments can guarantee a high degree of contaminant removal, reusability of effluents concurrently leading to process intensification ensuring ecofriendliness and commercial viability.

What Works! Encouraging Diversity in Science, Mathematics, Engineering, and Technology through Effective Mentoring. A 5-Year Overview of the Research Careers for Minority Scholars Program.

ERIC Educational Resources Information Center

National Science Foundation, Arlington, VA. Directorate for Education and Human Resources.

The National Science Foundation's (NSF) Research Careers for Minority Scholars (RCMS) program was initiated to encourage individuals from underrepresented groups in science, mathematics, engineering and technology (SMET) disciplines to complete undergraduate degree programs and matriculate to SMET graduate degree programs. This report describes…

Influence of gender of the teaching staff on students' acceptance of a virtual implant planning course.

PubMed

Nkenke, Emeka; Vairaktaris, Elefterios; Schaller, Hans-Günter; Perisanidis, Christos; Eitner, Stephan

2017-05-01

Acceptance of new technology is influenced by a number of situational and social factors. So far, only limited data are available on the influence of the teaching staff's gender on the acceptance of virtual dental implant planning by students. This study aimed at assessing the influence of the teaching staff's gender on the acceptance of a virtual implant planning course by male and female undergraduate dental students and their general attitude toward implantology. Two groups of third-year dental students (group 1, 9 males, 22 females; group 2, 12 males, 20 females) attended a virtual dental implant planning course. For the first group the teaching staff was all-male, while the teaching staff was all-female for the second group. After completion of the course the students filled in a technology acceptance questionnaire. An all-female teaching staff led to a degree of technology acceptance that did not differ significantly for male and female students. When the teaching staff was all-male, significant differences for technology acceptance occurred between male and female students. However, male as well as female students attributed the practice of implantology to both genders of dentists, equally, without statistically significant difference independent of the gender of the teaching staff. The more evenly distributed degree of technology acceptance of students of both genders being taught by a female staff is a favorable effect which may be explained by the more egalitarian style of women. Therefore, while feminization in dentistry proceeds, adequate measures should be taken to increase the number of female teachers. Copyright © 2017 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Operational and customer relationship management considerations of electronic prescribing among pharmacists.

PubMed

Smith, Alan D; Motley, Darlene

2009-01-01

Technology in healthcare environments has increasingly become a vital way to communicate vital information in a safe, reliable, precise and secure manner. Healthcare is an arena that is constantly changing and very fast paced, but adoption of electronic prescribing (e-prescribing) has been comparatively slow and painful in the USA. Medical professionals need a system to communicate medications and diagnosis, with patients' safety as the major consideration, especially with the many complexities associated with drug-interactions and allergies. Via multivariate analysis and linear regression analysis, it was found that degree of e-prescribing acceptance is highly predictable by constructs of Technological Sophistication, Operational Factors and Maturity Factors, which are very stable ease-of-use variables derived from the TAM Model by Davis (1989).

Improvements in the efficiency of turboexpanders in cryogenic applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Agahi, R.R.; Lin, M.C.; Ershaghi, B.

1996-12-31

Process designers have utilized turboexpanders in cryogenic processes because of their higher thermal efficiencies when compared with conventional refrigeration cycles. Process design and equipment performance have improved substantially through the utilization of modern technologies. Turboexpander manufacturers have also adopted Computational Fluid Dynamic Software, Computer Numerical Control Technology and Holography Techniques to further improve an already impressive turboexpander efficiency performance. In this paper, the authors explain the design process of the turboexpander utilizing modern technology. Two cases of turboexpanders processing helium (4.35{degrees}K) and hydrogen (56{degrees}K) will be presented.

Characterization of the Degree of Food Processing in Relation With Its Health Potential and Effects.

PubMed

Fardet, Anthony

2018-01-01

Up today technological processes are intended to produce safe and palatable food products. Yet, it is also expected that processing produces healthy and sustainable foods. However, due to the dramatic increase of chronic diseases prevalence worldwide, i.e., obesity, type 2 diabetes, cardiovascular diseases, and some cancers, ultraprocessing has been pointed out as producing unhealthy foods, rich in energy and poor in protective micronutrients and fiber, i.e., "empty" calories. Indeed the 1980s saw massive arrivals of ultraprocessed foods in supermarkets, i.e., fractionated-recombined foods with added ingredients and/or additives. Epidemiological studies clearly emphasized that populations adhering the most to ultraprocessed foods, e.g., processed meat, refined grains, ultraprocessed plant-based foods, and/or sweetened beverages, exhibited the higher prevalence of chronic diseases. This prompted researchers to classify foods according to their degree of processing as with the international NOVA classification (i.e., un/minimally processed, processed, and ultraprocessed foods). More and more studies showed that such a classification makes sense for health. Overall one distinguishes three categories of processes: mechanical, thermal, and fermentative treatments, this latter being the more favorable to food health potential. This chapter has therefore several ambitions: (1) to review association between degree of food processing and chronic disease risk prevalence; (2) to explore the impact of technological processes on food health potential considering both matrix and compositional effects; (3) to discuss the need for classifying food according to their degree of processing in future epidemiological studies; and (4) to analyze consequences of adhering to a more holistic paradigm in both food processing and nutrition. © 2018 Elsevier Inc. All rights reserved.

Technology Facilitation in the Rural School: An Analysis of Options.

ERIC Educational Resources Information Center

Hawkes, Mark; Halverson, Pamela; Brockmueller, Bradley

2002-01-01

A study examining technology support in rural schools surveyed 129 school technology coordinators in four upper plains states. Heavy pedagogical and technical demands were placed on rural technology coordinators. Rural technology coordinators should have teaching experience and advanced degree work in network administration, computer hardware…

Soccer-specific video simulation for improving movement assessment.

PubMed

Cortes, Nelson; Blount, Elaine; Ringleb, Stacie; Onate, James A

2011-03-01

The improvement of ecological validity of laboratory research studies has recently come to the forefront of technology with virtual reality scenarios. The purpose of this study was to assess differences between unanticipated and anticipated lower extremity biomechanics while performing a sidestep cutting task. A visualization software was developed for this purpose, which would recreate a soccer game situation for use in a laboratory setting. Thirteen participants volunteered for this study. Lower extremity biomechanical data were collected with a VICON motion analysis system and two force plates, under anticipated and unanticipated conditions while performing a sidestep cutting task. Paired t-tests were conducted to assess possible differences between conditions. Alpha level was set a priori at 0.05. We found an increased knee adduction angle (unanticipated: -7.2 +/- 5.30 degrees; anticipated: -4.0 +/- 5.3 degrees), and knee internal rotation (unanticipated: 8.1 +/- 4.7 degrees; anticipated: 5.2 +/- 6.5 degrees) when performing the unanticipated condition (p < 0.05). The methodological approaches for studies investigating the factors possibly associated with ACL injury may need to take into account the laboratory environment and how the task(s) are presented to the participants.

[Polarization Modeling and Analysis of Light Scattering Properties of Multilayer Films on Slightly Rough Substrate].

PubMed

Gao, Hui; Gao, Jun; Wang, Ling-mei; Wang, Chi

2016-03-01

To satisfy the demand of multilayer films on polarization detection, polarized bidirectional reflectance distribution function of multilayer films on slightly rough substrate is established on the basis of first-order vector perturbation theory and polarization transfer matrix. Due to the function, light scattering polarization properties are studied under multi-factor impacts of two typical targets-monolayer anti-reflection film and multilayer high-reflection films. The result shows that for monolayer anti-reflection film, observing positions have a great influence on the degree of polarization, for the left of the peak increased and right decreased compared with the substrate target. Film target and bare substrate can be distinguished by the degree of polarization in different observation angles. For multilayer high-reflection films, the degree of polarization is significantly associated with the number and optical thickness of layers at different wavelengths of incident light and scattering angles. With the increase of the layer number, the degree of polarization near the mirror reflection area decreases. It reveals that the calculated results coincide with the experimental data, which validates the correctness and rationality of the model. This paper provides a theoretical method for polarization detection of multilayer films target and reflection stealth technology.

General Dynamics of Topology and Traffic on Weighted Technological Networks

NASA Astrophysics Data System (ADS)

Wang, Wen-Xu; Wang, Bing-Hong; Hu, Bo; Yan, Gang; Ou, Qing

2005-05-01

For most technical networks, the interplay of dynamics, traffic, and topology is assumed crucial to their evolution. In this Letter, we propose a traffic-driven evolution model of weighted technological networks. By introducing a general strength-coupling mechanism under which the traffic and topology mutually interact, the model gives power-law distributions of degree, weight, and strength, as confirmed in many real networks. Particularly, depending on a parameter W that controls the total weight growth of the system, the nontrivial clustering coefficient C, degree assortativity coefficient r, and degree-strength correlation are all consistent with empirical evidence.

Evaluation of Project Based Learning in the Area of Manufacturing and Statistics in the Degree of Industrial Technology

ERIC Educational Resources Information Center

Buj-Corral, Irene; Marco-Almagro, Lluís; Riba, Alex; Vivancos-Calvet, Joan; Tort-Martorell, Xavier

2015-01-01

In the subject Project I in the second year of the Degree in Industrial Technology Engineering taught at the School of Industrial Engineering of Barcelona (ETSEIB), subgroups of 3-4 students within groups of 20 students develop a project along a semester. Results of 2 projects are presented related to manufacturing, measurement of parts and the…

College Students' Persistence and Degree Completion in Science, Technology, Engineering, and Mathematics (STEM): The Role of Non-Cognitive Attributes of Self-Efficacy, Outcome Expectations, and Interest

ERIC Educational Resources Information Center

Aryee, Michael

2017-01-01

The lack of students' persistence (or student's effort to continue their academic studies until degree completion) in Science, Technology, Engineering, and Mathematics (STEM) and the attrition of STEM students as well as the shortage of STEM workers have gathered much attention from policy makers, governmental agencies, higher education…

Characteristics of Associate's Degree Attainers and Time to Associate's Degree. Web Tables. NCES 2012-271

ERIC Educational Resources Information Center

Green, Caitlin; Radwin, David

2012-01-01

The number of associate's degrees conferred by U.S. postsecondary institutions increased 30 percent from 1997 to 2007, from 571,000 to 745,000, and is projected to grow another 30 percent by 2020, a faster pace than the actual and projected growth in bachelor's degrees awarded. Despite the growing prevalence of associate's degrees, however, there…

Time to Degree: A National View of the Time Enrolled and Elapsed for Associate and Bachelor's Degree Earners. (Signature Report No. 11)

ERIC Educational Resources Information Center

Shapiro, Doug; Dundar, Afet; Wakhungu, Phoebe Khasiala; Yuan, Xin; Nathan, Angel; Hwang, Youngsik

2016-01-01

This report examines time to degree completion for a cohort of students who earned an associate degree as their first and only postsecondary degree or a bachelor's degree as their first four-year degree between July 1, 2014, and June 30, 2015. Overall, the average time enrolled for associate and bachelor's degree earners was 3.3 years and 5.1…

The effects of heat treatment on technological properties in Red-bud maple (Acer trautvetteri Medw.) wood.

PubMed

Korkut, Süleyman; Kök, M Samil; Korkut, Derya Sevim; Gürleyen, Tuğba

2008-04-01

Heat treatment is often used to improve the dimensional stability of wood. In this study, the effects of heat treatment on technological properties of Red-bud maple (Acer trautvetteri Medw.) wood were examined. Samples obtained from Düzce Forest Enterprises, Turkey, were subjected to heat treatment at varying temperatures (120 degrees C, 150 degrees C and 180 degrees C) and for varying durations (2h, 6h and 10h). The technological properties of heat-treated wood samples and control samples were tested. Compression strength parallel to grain, bending strength, modulus of elasticity in bending, janka-hardness, impact bending strength, and tension strength perpendicular to grain were determined. The results showed that technological strength values decreased with increasing treatment temperature and treatment times. Red-bud maple wood could be utilized by using proper heat treatment techniques with minimal losses in strength values in areas where working, and stability such as in window frames, are important factors.

Teach Technology: Make a Difference.

ERIC Educational Resources Information Center

Seymour, Richard; And Others

1993-01-01

Includes "Importance of Being a Technology Teacher" (Seymour); "Opportunity for Minority Teachers" (Scott); "You Can Shape the Future" (Lovedahl); "Boring? NOT!" (Wright); and "1993 Listing of Institutional Members" (directory of degree programs in technology education). (JOW)

Report on enhancing young scholars in science and technology the Center for Excellence in Education

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The present stock and flow of highly talented young persons engaged in the global discovery and application of science and technology are critical to the future pace of innovation. Historically, the world`s largest reservoirs of scientists and engineers have been in the Western economies. Overtime, however, Asia has begun to build equivalent pools of scientists and engineers among their university graduates. According to 1993 data from the National Science Foundation and the UNESCO World Science Report, Germany leads all economies with a 67% ratio of science and engineering degrees to total first university degrees compared to the United States withmore » a distant fifth place at 32% behind Italy, Mexico and Poland. If the nation is to keep its scientific and technological prowess, it must capture its very best talent in the science and technology fields. The question is then raised as to the source within the United States of the science and technology talent pool. While between 1978 and 1991 there was an overall decline in male participation in undergraduate (-9%) and graduate degrees (-12%), the number of women receiving undergraduate (+8%) and graduate degrees (+34%) rose dramatically. These numbers are encouraging for women`s participation overall, however, women earn only a small percentage of physical science and engineering degrees. Why are there so few women in mathematics, engineering, and the physical sciences? The answers are complex and begin early in a woman`s exposure to science and mathematics. This report presents results on a study of careers of alumni from the Research Science Institute. Investigations were concerned with the timing of decision processes concerned with the sciences and math and factors that influenced people to turn away from or proceed with careers in science and math.« less

Progress in ion torrent semiconductor chip based sequencing.

PubMed

Merriman, Barry; Rothberg, Jonathan M

2012-12-01

In order for next-generation sequencing to become widely used as a diagnostic in the healthcare industry, sequencing instrumentation will need to be mass produced with a high degree of quality and economy. One way to achieve this is to recast DNA sequencing in a format that fully leverages the manufacturing base created for computer chips, complementary metal-oxide semiconductor chip fabrication, which is the current pinnacle of large scale, high quality, low-cost manufacturing of high technology. To achieve this, ideally the entire sensory apparatus of the sequencer would be embodied in a standard semiconductor chip, manufactured in the same fab facilities used for logic and memory chips. Recently, such a sequencing chip, and the associated sequencing platform, has been developed and commercialized by Ion Torrent, a division of Life Technologies, Inc. Here we provide an overview of this semiconductor chip based sequencing technology, and summarize the progress made since its commercial introduction. We described in detail the progress in chip scaling, sequencing throughput, read length, and accuracy. We also summarize the enhancements in the associated platform, including sample preparation, data processing, and engagement of the broader development community through open source and crowdsourcing initiatives. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Preservice Teacher Education.

ERIC Educational Resources Information Center

Moore, Barbara, Ed.; Burkett, Ruth, Ed.; White, James A., Ed.; Feyten, Carine M., Ed.

The papers contained in this document cover the following topics related to preservice teacher education and technology: an initiative to improve technology education in Michigan; computer technology courses; uses of information technologies in an Australian degree program; use of an electronic bulletin board; discovering South Dakota through…

High-pressure processing and antimicrobial biodegradable packaging to control Listeria monocytogenes during storage of cooked ham.

PubMed

Marcos, Begonya; Aymerich, Teresa; Monfort, Josep M; Garriga, Margarita

2008-02-01

The efficiency of combining high-pressure processing (HPP) and active packaging technologies to control Listeria monocytogenes growth during the shelf life of artificially inoculated cooked ham was assessed. Three lots of cooked ham were prepared: control, packaging with alginate films, and packaging with antimicrobial alginate films containing enterocins. After packaging, half of the samples were pressurized. Sliced cooked ham stored at 6 degrees C experienced a quick growth of L. monocytogenes. Both antimicrobial packaging and pressurization delayed the growth of the pathogen. However, at 6 degrees C the combination of antimicrobial packaging and HPP was necessary to achieve a reduction of inoculated levels without recovery during 60 days of storage. Further storage at 6 degrees C of pressurized antimicrobial packed cooked ham resulted in L. monocytogenes levels below the detection limit (day 90). On the other hand, storage at 1 degrees C controlled the growth of the pathogen until day 39 in non-pressurized ham, while antimicrobial packaging and storage at 1 degrees C exerted a bacteriostatic effect for 60 days. All HPP lots stored at 1 degrees C led to counts <100CFU/g at day 60. Similar results were observed when combining both technologies. After a cold chain break no growth of L. monocytogenes was observed in pressurized ham packed with antimicrobial films, showing the efficiency of combining both technologies.

A Study: Exploring the Feasibility of Developing a Computer Science Online Degree Program at Tuskegee University

ERIC Educational Resources Information Center

Buckley, Ingrid A.; Narang, Hira

2014-01-01

This paper investigates the feasibility of developing an online degree for a computer science and information technology degree programs. Our motivation is to increase access to quality education with the aim of stimulating growth, attracting new students, and retaining our current student body. A survey was conducted of CS/IT online degrees which…

Systems Engineering Technology Readiness Assessment of Hybrid-Electric Technologies for Tactical Wheeled Vehicles

DTIC Science & Technology

2014-09-01

reasonable yield within this decade. Similarly, the permanent magnet motors , which are desirable for traction due to their high efficiency, must also be...degrees C and 180 degrees C (RDECOM Public Affairs 2014). Current electric drive vehicles, using permanent magnet motors , have thermal limitations well...performance and their good efficiency, benefits particularly applicable to permanent magnet motors . Synchronous motors with permanent magnets, in

High-temperature optical fiber sensors for characterization of advanced composite aerospace materials

NASA Astrophysics Data System (ADS)

Wavering, Thomas A.; Greene, Jonathan A.; Meller, Scott A.; Bailey, Timothy A.; Kozikowski, Carrie L.; Lenahan, Shannon M.; Murphy, Kent A.; Camden, Michael P.; Simmons, Larry W.

1999-01-01

Optical fiber sensors have numerous advantages over conventional sensing technologies. One such advantage is that optical fiber sensors can operate in high temperature environments. While most conventional electrical-based sensors do not operate reliably over 300 degrees C, fused silica based optical fiber sensors can survive up to 900 degrees C, and sapphire based optical fiber sensors can survive up to 2000 degrees C. Using both fused silica and sapphire technologies, we present result for high temperature strain, pressure, and temperature sensors using Extrinsic Fabry-Perot INterferometric-based and Bragg grating sensors. High temperature strain and temperature sensors were used to conduct fatigue testing of composite coupons at 600 degrees C. The results from these specific high temperature applications are presented along with future applications and directions for these sensors.

40 CFR 408.202 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.162 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.202 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.312 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.162 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.312 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.162 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.202 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.312 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.312 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.172 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.202 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.202 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

40 CFR 408.312 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... representing the degree of effluent reduction attainable by the application of the best practicable control... effluent reduction attainable by the application of the best practicable control technology currently...

Four-Year Itch

ERIC Educational Resources Information Center

Pierce, Dennis

2017-01-01

Ohio's decision to let community colleges award four-year degrees is part of a growing national trend. When this article went to press, more than 90 community colleges across 19 states offered active four-year degree programs. Counting New York's Fashion Institute of Technology, which technically is a community college, but offers degrees as high…

40 CFR 463.33 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY Finishing Water Subcategory § 463.33 Effluent limitations guidelines representing the degree of effluent reduction...

40 CFR 463.12 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best practicable control... AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY... degree of effluent reduction attainable by the application of the best practicable control technology...

40 CFR 463.23 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... representing the degree of effluent reduction attainable by the application of the best available technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS PLASTICS MOLDING AND FORMING POINT SOURCE CATEGORY Cleaning Water Subcategory § 463.23 Effluent limitations guidelines representing the degree of effluent reduction...

The Perspectives of Students Undertaking Masters' Degrees by Coursework on Career Development Learning

ERIC Educational Resources Information Center

Walsh, Shari P.; Tucker, Kelly

2011-01-01

Master's degree by coursework students have been identified as a "forgotten" cohort by the Queensland University of Technology (QUT) Careers and Employment service. Traditionally, these students have been included in undergraduate career development activities. Master's degree students are arguably a specialised group due to the advanced…

Outer planet atmospheric entry probes - An overview of technology readiness

NASA Technical Reports Server (NTRS)

Vojvodich, N. S.; Reynolds, R. T.; Grant, T. L.; Nachtsheim, P. R.

1975-01-01

Entry probe systems for characterizing, by in situ measurements, the atmospheric properties, chemical composition, and cloud structure of the planets Saturn, Uranus, and Jupiter are examined from the standpoint of unique mission requirements, associated subsystem performance, and degree of commonality of design. Past earth entry vehicles (PAET) and current planetary spacecraft (Pioneer Venus probes and Viking lander) are assessed to identify the extent of potential subsystem inheritance, as well as to establish the significant differences, in both form and function, relative to outer planet requirements. Recent research results are presented and reviewed for the most critical probe technology areas, including: science accommodation, telecommunication, and entry heating and thermal protection. Finally presented is a brief discussion of the use of decision analysis techniques for quantifying various probe heat-shield test alternatives and performance risk.

Enhancing behavioral health treatment and crisis management through mobile ecological momentary assessment and SMS messaging.

PubMed

Smith, Brad; Harms, William D; Burres, Stephanie; Korda, Holly; Rosen, Howard; Davis, Jamie

2012-12-01

Many veterans returning from service in Afghanistan or Iraq suffer from post-traumatic stress disorder or mild traumatic brain injury. Treating these conditions can be challenging because of high rates of relapse and associated memory impairments. We report on a pilot study that assessed the utility of mobile health (mHealth) technologies, including personal digital assistant-based ecological momentary assessment and two-way interactive text (SMS) messaging, for providing treatment feedback to clinicians, encouraging and motivating veterans throughout treatment, and monitoring participants for relapse after treatment discharge. The results of the pilot suggest that mHealth technologies are feasible adjuncts to traditional mental treatment in the veteran population. Additional work is needed to establish the degree of clinical and economic value.

Investigation of Transmission Warming Technologies at Various Ambient Conditions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jehlik, Forrest; Iliev, Simeon; Wood, Eric

This work details two approaches for evaluating transmission warming technology: experimental dynamometer testing and development of a simplified transmission efficiency model to quantify effects under varied real world ambient and driving conditions. Two vehicles were used for this investigation: a 2013 Ford Taurus and a 2011 Ford Fusion. The Taurus included a production transmission warming system and was tested over hot and cold ambient temperatures with the transmission warming system enabled and disabled. A robot driver was used to minimize driver variability and increase repeatability. Additionally the Fusion was tested cold and with the transmission pre-heated prior to completing themore » test cycles. These data were used to develop a simplified thermally responsive transmission model to estimate effects of transmission warming in real world conditions. For the Taurus, the fuel consumption variability within one standard deviation was shown to be under 0.5% for eight repeat Urban Dynamometer Driving Cycles (UDDS). These results were valid with the transmission warming system active or passive. Using the transmission warming system under 22 degrees C ambient temperature, fuel consumption reduction was shown to be 1.4%. For the Fusion, pre-warming the transmission reduced fuel consumption 2.5% for an urban drive cycle at -7 degrees C ambient temperature, with 1.5% of the 2.5% gain associated with the transmission, while consumption for the US06 test was shown to be reduced by 7% with 5.5% of the 7% gain associated with the transmission. It was found that engine warming due to conduction between the pre-heated transmission and the engine resulted in the remainder of the benefit. For +22 degrees C ambient tests, the pre-heated transmission was shown to reduce fuel consumption approximately 1% on an urban cycle, while no benefit was seen for the US06 cycle. The simplified modeling results showed gains in efficiency ranging from 0-1.5% depending on the ambient temperature and drive cycle.« less

A Gadamerian Phenomenological Study Examining the Meaning of Having a Bachelor's Degree Expressed by Associate Degree Nurses (ADN) Who Educationally Transitioned to a Baccalaureate Degree in Nursing (BSN)

ERIC Educational Resources Information Center

Sauld, Jill Pierpont

2017-01-01

Since the inception of associate degree nursing programs, professional nursing conversations and debate have grappled with reckoning differences between the associate degree in nursing (ADN) and the bachelor's degree in nursing (BSN). Research reporting better patient outcomes with more baccalaureate prepared nurses has been a driving force for…

Cultivating Diversity and Competency in STEM: Challenges and Remedies for Removing Virtual Barriers to Constructing Diverse Higher Education Communities of Success.

PubMed

Whittaker, Joseph A; Montgomery, Beronda L

2012-01-01

The need to increase the number of college graduates in Science, Technology, Engineering, and Mathematics (STEM) disciplines is a national issue. As the demographics of the United States' population grow increasingly more diverse, the recognition that students of color are disproportionately under-represented among those individuals successful at completing STEM degrees requires exigent and sustained intervention. Although a range of efforts and funding have been committed to increasing the success of under-represented minority (URM) students at primarily white, or majority, institutions, widespread progress has been slow. Simultaneously, Historically Black Colleges and Universities and Minority Serving Institutions have demonstrated disproportionate successes in graduating URM students with STEM degrees and those that proceed to completing graduate-level degrees in the sciences. The differential successes of particular institutions with promoting the achievement of diverse individuals in obtaining academic STEM degrees suggest that with committed and strategic leadership, advancements in creating academic communities that promote the success of a diverse range of students in STEM can be achieved in part through assessing and mitigating environmental barriers that impede success at majority institutions. In this paper, we address issues related to the engagement of URM students in majority settings and describe some efforts that have shown success for promoting diversity in STEM and highlight continuing issues and factors associated with cultivating diversity in academic STEM disciplines at majority institutions. Recommended efforts include addressing academic assistance, professional and cultural socialization issues and institutional environmental factors that are associated with success or lack thereof for URMs in STEM.

Issues in Associate Degree Nursing. Bridge to Success. Education and Service: A Partnership for Associate Degree Nursing.

ERIC Educational Resources Information Center

Southern Regional Education Board, Atlanta, GA.

This publication is a compilation of highlights from papers presented at the Associate Degree Nursing (ADN) project's regional conferences during 1983-84. Papers address pertinent issues in ADN education and practice. "AD Education: Are the Parameters Real?" (Julia Perkins) examines the parameters of associate degree nursing education from a…

Characteristics Associated with Persistence and Retention among First-Generation College Students Majoring in Science, Technology, Engineering, or Math

NASA Astrophysics Data System (ADS)

Burnett, Lorie Lasseter

Persistence and retention of college students is a great concern in American higher education. The dropout rate is even more apparent among first-generation college students, as well as those majoring in science, technology, engineering, and math (STEM). More students earning STEM degrees are needed to fill the many jobs that require the skills obtained while in college. More importantly, those students who are associated with a low-socioeconomic background may use a degree to overcome poverty. Although many studies have been conducted to determine the characteristics associated with student attrition among first-generation students or STEM majors, very little information exists in terms of persistence and retention among the combined groups. The current qualitative study identified some of the characteristics associated with persistence and retention among first-generation college students who are also STEM majors. Participants were juniors or seniors enrolled at a regional 4-year institution. Face-to-face interviews were conducted to allow participants to share their personal experiences as first-generation STEM majors who continue to persist and be retained by their institution. Tinto's Theory of Individual Departure (1987) was used as a framework for the investigation. This theory emphasizes personal and academic background, personal goals, disconnecting from one's own culture, and institutional integration as predictors of persistence. The findings of the investigation revealed that persisting first-generation STEM majors are often connected to family, but have been able to separate that connection with that of the institution. They also are goal-driven and highly motivated and have had varied pre-college academic experiences. These students are academically integrated and socially integrated in some ways, but less than their non-first-generation counterparts. They are overcoming obstacles that students from other backgrounds may not experience. They receive support from their families and institution, but have diverse academic backgrounds. The findings show that a culmination of many characteristics have enabled the participants to persist and be retained by their institution.

The MSU Educational Technology Certificate Courses and Their Impact on Teachers' Growth as Technology Integrators

ERIC Educational Resources Information Center

Hagerman, Michelle Schira; Keller, Alison; Spicer, Jodi L.

2013-01-01

The Educational Technology Certificate (ETC.) courses at Michigan State University are a set of three courses that can be taken as a standalone qualification or as the first three courses in the Master's of Educational Technology degree. Together, the courses emphasize the development of technology skills and advanced mindsets for technology…

Review of Gender Differences in Learning Styles: Suggestions for STEM Education

ERIC Educational Resources Information Center

Kulturel-Konak, Sadan; D'Allegro, Mary Lou; Dickinson, Sarah

2011-01-01

Women have made great strides in baccalaureate degree obtainment, out numbering men by over 230,000 conferred baccalaureate degrees in 2008. However, the proportion of earned degrees for women in some of the Science, Technology, Engineering, and Mathematics (STEM) courses continues to lag behind male baccalaureate completions (National Science…

Acceptance of Online Degrees by Undergraduate Mexican Students

ERIC Educational Resources Information Center

Padilla Rodriguez, Brenda Cecilia; Adams, Jonathan

2014-01-01

The quality and acceptance of online degree programs are still controversial issues. In Mexico, where access to technology is limited, there are few studies on the matter. Undergraduate students (n = 104) answered a survey that aimed to evaluate their knowledge of virtual education, their likelihood of enrollment in an online degree program, and…

Undergraduate Research Participation and STEM Graduate Degree Aspirations among Students of Color

ERIC Educational Resources Information Center

Strayhorn, Terrell L.

2010-01-01

Increasing the number of students who complete advanced degrees in science, technology, engineering, and mathematics (STEM) fields is a compelling national interest. Although college science and engineering degree completion rates have improved considerably over the past few decades, significant gaps persist among women and students of color. Gaps…

Community College Baccalaureates: Some Critics Decry the Trend as "Mission Creep".

ERIC Educational Resources Information Center

Mills, Kay

Saint Petersburg College (SPC) (Florida) has begun to enroll students in bachelor's degree programs in education and technology management, and a B.S. program in nursing. This article presents critics' arguments against community colleges offering bachelor's degrees, suggesting that community college B.A.s are inferior degrees, and that offering…

In Search of the Best On-Line Degree Programs in Human Resources.

ERIC Educational Resources Information Center

Kirk, James J.; Waltemyer, Holly

The advent of the Internet, the World Wide Web, and global infrastructures for e-learning are revolutionizing how colleges and universities deliver degree programs to adult students. Benefits of on-line degree programs to working adults include flexibility, convenience, and time and cost savings. New technologies that greatly affect how online…

An integrated approach to Smart House technology for people with disabilities.

PubMed

Allen, B

1996-04-01

It is now commonly accepted that 'Smart House' technology can play a significant part in helping both elderly and disabled people enjoy a greater degree of independence in the near future. In order to realize this aspiration, it is necessary to examine a number of factors: the development of the appropriate Home Bus technologies and supported devices; the development of the appropriate user interfaces that will allow people with a range of special needs use the system; the incorporation of the requirements of the 'Smart House' controller with the other technological needs of the user; and the development of mainstream technologies that will affect the cost and availability of devices to the user. This paper will examine the above points and suggest appropriate actions and trends. It will draw upon the work of a four-member consortium currently finalizing a technical development project under the EC TIDE program, the experience of research and commercial organizations engaged in development work in associated areas and the experiences of the Dublin-based, Central Remedial Clinic and in particular, its Client Technical Services Unit. The CTSU have been actively engaged in the development of systems for clients and direct clinical assessments for the last 12 years.

[Studies on technology of supercritical-CO2 fluid extraction for volatile oils and saikosaponins in Bupleurum chinense DC].

PubMed

Ge, F H; Li, Y; Xie, J M; Li, Q; Ma, G J; Chen, Y H; Lin, Y C; Li, X F

2000-03-01

To study the technology of supercritical-CO2 fluid extraction (SFE-CO2) for the volatile oils and saikosaponins in Bupleurum chinense. Exploring the effects of pressure, temperature, extraction time, flow rate of CO2 and entrainers on the yield of the oils and saikosaponin-contained extracts; determining the optimum conditions for SFE-CO2; analyzing the oils by GC/MS and comparing the technology of SFE-CO2 with that of traditional steam distillation. The optimum extraction conditions turned out to be--for volatile oils: pressure (EP) = 20 MPa, temperature (ET) = 30 degrees C, isolator I pressure (1P-I) = 12 MPa, temperature(1T-I) = 65 degrees C, isolator II pressure (1P-II) = 6 MPa, temperature (1T-II) = 40 degrees C, extraction time = 4 hours, and CO2 flow rate = 10-20 kg.(h.kg)-1 crude drug; for saikosaponins: EP = 30 MPa, ET = 65 degrees C, 1P I = 12 MPa, 1T I = 55 degrees C, 1P II = 6 MPa, 1T II = 43 degrees C, extraction time = 3 hours, entrainer = 60% ethanol, and CO2 flow rate = 20-25 kg.(h.kg)-1 crude drug. SFE-CO2 excels the traditional steam distillation in raising yield and reducing extraction time. The oils are composed of 22 constituents including caproaldehyde, and the saikosaponins can only be extracted with the help of entrainers under higher pressure and temperature.

Traveller's thrombosis: a review of deep vein thrombosis associated with travel. The Air Transport Medicine Committee, Aerospace Medical Association.

PubMed

Bagshaw, M

2001-09-01

There is an increasing suspicion among the travelling public and the international media of an association between the occurrence of deep venous thrombosis (DVT) and air travel. It was noted by the UK House of Lords Select Committee on Science and Technology that up to 20% of the total population may have some degree of increased clotting tendency. It follows that some air travellers are at risk of developing DVT when, or soon after, travelling. There have been no epidemiological studies published which show a statistically significant increase in cases of DVT when travelling in the absence of pre-existing risk factors. The literature was reviewed. Current evidence indicates that any association between symptomatic DVT and travel by air is weak, and the incidence is less than the impression given by recent media publicity.

[Preparation and transmissivity of ZnS nanocolumn thin films with glancing angle deposition technology].

PubMed

Lu, Li-Fang; Xu, Zheng; Zhang, Fu-Jun; Zhao, Su-Ling; Song, Dan-Dan; Li, Jun-Ming; Wang, Yong-Sheng; Xu, Xu-Rong

2010-02-01

Nanocrystalline ZnS thin films were fabricated by glancing angle deposition (GLAD) technology in an electron beam evaporation system. Deposition was carried out in the custom vacuum chamber at a base pressure 3 x 10(-4) Pa, and the deposition rate was fixed at 0.2 nm x s(-1). ZnS films were deposited on pieces of indium tin oxide (ITO) substrates when the oblique angle of the substrate relative to the incoming molecular flux was set to 0 degrees, 80 degrees and 85 degrees off the substrate normal respectively. X-ray diffraction (XRD) spectra and scanning electron microscope (SEM) images showed that ZnS nanocrystalline films were formed on the substrates at different oblique angle, but the nanocolumn structure was only formed under the situation of alpha = 80 degrees and 85 degrees. The dynamics during the deposition process of the ZnS films at alpha = 0 degrees, 80 degrees and 85 degrees was analyzed. The transmitted spectra of ZnS thin films deposited on ITO substrates showed that the ZnS nanocolumn thin films could enhance the transmissivity in visible range. The ZnS nanocolumn could be used into electroluminescence device, and it would enhance the luminous efficiency of the device.

Options for the destruction of chemical weapons and management of the associated risks.

PubMed

Manley, Ron G

2006-09-01

The destruction of chemical weapons is a hazardous operation. The degree of hazard posed, however, is not uniform and is dependent on the specific chemical agent and the configuration of the weapon or bulk storage vessel in which it is contained. For example, a highly volatile nerve agent in an explosively configured munition, such as a rocket, poses a very different hazard from that of a bulk storage container of viscous mustard gas. Equally the handling of recovered, often highly corroded, World War (WW)I or WWII chemical munitions will pose a very different hazard from that associated with dealing with modern chemical weapons stored under the appropriate conditions. Over the years, a number of technologies have been developed for the destruction of chemical weapons. Each has its advantages and disadvantages. None of them provide a universal solution to the problem. When assessing options for the destruction of these weapons and the management of the associated risks, therefore, it is important to give due consideration and weight to these differences. To ensure that the destruction technology selected takes due account of them and that the resulting overall risk assessment accurately reflects the actual risks involved.

Education evolution: a historical perspective of associate degree nursing.

PubMed

Orsolini-Hain, Liana; Waters, Verle

2009-05-01

Exploring the inception and growth of associate degree nursing education informs our understanding of what led to such explosive growth so that most of the nursing workforce is currently educated at the associate degree level. The success of associate degree nursing programs led to many divisive years in nursing education of differentiation of practice debates that were hardly productive. Work world practices and patient needs are creating pressures on community colleges to join forces with universities to increase the percentage of baccalaureate-educated nurses. Associate degree nursing education continues to evolve to meet the demands of a higher educated nursing workforce.

Understanding the influences of different pretreatments on recalcitrance of Populus natural variants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yao, Lan; Yang, Haitao; Yoo, Chang Geun

Here, four different pretreatment technologies were applied to two Populus natural variants and the effects of each pretreatment on glucose release were compared. Physicochemical properties of pretreated biomass were analyzed by attenuated total reflection Fourier transform infrared spectroscopy, gel permeation chromatography, and cross polarization/magic angle spinning carbon-13 nuclear magnetic resonance techniques. The results revealed that hemicellulose and lignin were removed to different extents during various pretreatments. The degree of polymerization of cellulose was decreased in the order of alkali > hydrothermal > organosolv > dilute acid pretreatment. Cellulose crystallinity index was slightly increased after each pretreatment. The results also demonstratedmore » that organosolv pretreatment resulted in the highest glucose yield. Among the tested properties of Populus, degree of polymerization of cellulose was negatively correlated with glucose release, whereas hemicellulose and lignin removal, and cellulose accessibility were positively associated with glucose release from the two Populus natural variants.« less

Understanding the influences of different pretreatments on recalcitrance of Populus natural variants

DOE PAGES

Yao, Lan; Yang, Haitao; Yoo, Chang Geun; ...

2018-05-18

Here, four different pretreatment technologies were applied to two Populus natural variants and the effects of each pretreatment on glucose release were compared. Physicochemical properties of pretreated biomass were analyzed by attenuated total reflection Fourier transform infrared spectroscopy, gel permeation chromatography, and cross polarization/magic angle spinning carbon-13 nuclear magnetic resonance techniques. The results revealed that hemicellulose and lignin were removed to different extents during various pretreatments. The degree of polymerization of cellulose was decreased in the order of alkali > hydrothermal > organosolv > dilute acid pretreatment. Cellulose crystallinity index was slightly increased after each pretreatment. The results also demonstratedmore » that organosolv pretreatment resulted in the highest glucose yield. Among the tested properties of Populus, degree of polymerization of cellulose was negatively correlated with glucose release, whereas hemicellulose and lignin removal, and cellulose accessibility were positively associated with glucose release from the two Populus natural variants.« less

Technology achievements and projections for communication satellites of the future

NASA Technical Reports Server (NTRS)

Bagwell, J. W.

1986-01-01

Multibeam systems of the future using monolithic microwave integrated circuits to provide phase control and power gain are contrasted with discrete microwave power amplifiers from 10 to 75 W and their associated waveguide feeds, phase shifters and power splitters. Challenging new enabling technology areas include advanced electrooptical control and signal feeds. Large scale MMIC's will be used incorporating on chip control interfaces, latching, and phase and amplitude control with power levels of a few watts each. Beam forming algorithms for 80 to 90 deg. wide angle scanning and precise beam forming under wide ranging environments will be required. Satelllite systems using these dynamically reconfigured multibeam antenna systems will demand greater degrees of beam interconnectivity. Multiband and multiservice users will be interconnected through the same space platform. Monolithic switching arrays operating over a wide range of RF and IF frequencies are contrasted with current IF switch technology implemented discretely. Size, weight, and performance improvements by an order of magnitude are projected.

Joint MS Degree Program between the Korea University of Technology and Education and the University of Kansas

NASA Astrophysics Data System (ADS)

Dougherty, R. L.; Kim, Kwang Su

This paper provides an overview of the Joint MS Degree Program between Korea University of Technology and Education’ s (KUT) Mechatronics Department and Kansas University’ s (KU) Mechanical Engineering Department. Discussions were initiated in early 2005 which resulted in a formal agreement being approved by both parties in mid-2007. The Joint MS Degree Program is composed of 30 semester credit hours, equally split between the two universities, with the actual degree being awarded by the institution at which the thesis work is performed. Issues addressed during the development of this Joint MS Program included: joint versus dual degrees, institutional acceptance of the transfer of fifteen hours of credit for an MS degree, different admissions requirements and procedures for the two institutions, financial support of the students, faculty advisors at each institution, Graduate Directors at each institution, transcript acknowledgement of the Joint Degree, residency requirements, English speaking requirements/abilities, thesis publication allowances/requirements, and time zone differences for virtual meetings. These issues have been addressed, and the Joint MS Degree Program is functioning with a small number of students having taken advantage of the opportunity since the Program’ s inception. Future considerations are: growing the number of students in the Program, expansion to other Departments besides KU-Mechanical Engineering and KUTMechatronics, including other universities in the Program, expansion to a Joint PhD Degree Program, and stronger funding resources.

Are They Ready to Teach with Technology? An Investigation of Technology Instruction in Music Teacher Education Programs

ERIC Educational Resources Information Center

Haning, Marshall

2016-01-01

The purpose of this research was to investigate the type, quantity, and effects of technology instruction currently being provided to undergraduate music education majors. Undergraduate participants (n = 46) at 10 degree-granting institutions completed an online survey on the technology instruction received during their undergraduate degree…

Real-time cell toxicity profiling of Tox21 10K compounds reveals cytotoxicity dependent toxicity pathway linkage

PubMed Central

Huang, Ruili; Lin, Ja-An; Sedykh, Alexander; Zhao, Jinghua; Tice, Raymond R.; Paules, Richard S.; Xia, Menghang; Auerbach, Scott S.

2017-01-01

Cytotoxicity is a commonly used in vitro endpoint for evaluating chemical toxicity. In support of the U.S. Tox21 screening program, the cytotoxicity of ~10K chemicals was interrogated at 0, 8, 16, 24, 32, & 40 hours of exposure in a concentration dependent fashion in two cell lines (HEK293, HepG2) using two multiplexed, real-time assay technologies. One technology measures the metabolic activity of cells (i.e., cell viability, glo) while the other evaluates cell membrane integrity (i.e., cell death, flor). Using glo technology, more actives and greater temporal variations were seen in HEK293 cells, while results for the flor technology were more similar across the two cell types. Chemicals were grouped into classes based on their cytotoxicity kinetics profiles and these classes were evaluated for their associations with activity in the Tox21 nuclear receptor and stress response pathway assays. Some pathways, such as the activation of H2AX, were associated with the fast-responding cytotoxicity classes, while others, such as activation of TP53, were associated with the slow-responding cytotoxicity classes. By clustering pathways based on their degree of association to the different cytotoxicity kinetics labels, we identified clusters of pathways where active chemicals presented similar kinetics of cytotoxicity. Such linkages could be due to shared underlying biological processes between pathways, for example, activation of H2AX and heat shock factor. Others involving nuclear receptor activity are likely due to shared chemical structures rather than pathway level interactions. Based on the linkage between androgen receptor antagonism and Nrf2 activity, we surmise that a subclass of androgen receptor antagonists cause cytotoxicity via oxidative stress that is associated with Nrf2 activation. In summary, the real-time cytotoxicity screen provides informative chemical cytotoxicity kinetics data related to their cytotoxicity mechanisms, and with our analysis, it is possible to formulate mechanism-based hypotheses on the cytotoxic properties of the tested chemicals. PMID:28531190

ITKids part II: variation of postures and muscle activity in children using different information and communication technologies.

PubMed

Ciccarelli, Marina; Straker, Leon; Mathiassen, Svend Erik; Pollock, Clare

2011-01-01

There are concerns that insufficient variation in postural and muscle activity associated with use of modern information and communication technology (ICT) presents a risk for musculoskeletal ill-health among school children. However, scientific knowledge on physical exposure variation in this group is limited. The purpose of this study was to quantify postures and muscle activity of school children using different types of ICT. Postures of the head, upper back and upper arm, and muscle activity of the right and left upper trapezius and right forearm extensors were measured over 10-12 hours in nine school children using different types of ICT at school and away-from-school. Variation in postures and muscle activity was quantified using two indices, EVA{sd} and APDF₉₀-₁₀. Paper-based (Old) ICT tasks produced postures that were less neutral but more variable than electronics-based (New ICT) and Non-ICT tasks. Non-ICT tasks involved mean postures similar to New ICT tasks, but with greater variation. Variation of muscle activity was similar between ICT types in the right and left upper trapezius muscles. Non-ICT tasks produced more muscle activity variation in the right forearm extensor group compared to New and Old ICT tasks. Different ICT tasks produce different degrees of variation in posture and muscle activity. Combining tasks that use different ICT may increase overall exposure variation. More research is needed to determine what degree of postural and muscle activity variation is associated with reduced risk of musculoskeletal ill-health.

Teachers' Degree of Instructional Technology Use and Its Effect on the Mathematics Achievement of Students in Secondary Schools

ERIC Educational Resources Information Center

Dutton, Valencia K.

2012-01-01

Integrating computer technology began as a poorly planned idea where teachers were inadequately trained in how to integrate the use of technology into the classroom (Wright & Shade, 1994 as cited in Bauer & Kenton, 2005). As the use of technology continues to advance around the world, the impact of the new technology equipment and…

Introduction of a theoretical splashing degree to assess the performance of low-viscosity oils in filling of capsules.

PubMed

Niederquell, Andreas; Kuentz, Martin

2011-03-01

These days an alternative to soft capsules is liquid-filled hard capsules. Their filling technology was investigated earlier with highly viscous formulations, while hardly any academic research focused on low-viscosity systems. Accordingly, this work addressed the filling of such oils that are splashing during the dosing process. It was aimed to first study capsule filling, using middle-chain triglycerides as reference oil, in order to then evaluate the concept of a new theoretical splashing degree for different oils. A laboratory-scale filling machine was used that included capsule sealing. Thus, the liquid encapsulation by microspray technology was employed to seal the dosage form. As a result of the study with reference oil, the filling volume and the temperature were found to be significant for the rate of leaking capsules. The filling volume was also important for weight variability of the capsules. However, most critical for this variability was the diameter of the filling nozzle. We proposed a power law for the coefficient of weight variability as a function of the nozzle diameter and the obtained exponent agreed with the proposed theory. Subsequently, a comparison of different oils revealed that the relative splashing degree shared a correlation with the coefficient of the capsule weight variability (Pearson product moment correlation of r=0.990). The novel theoretical concept was therefore found to be predictive for weight variability of the filled capsules. Finally, guidance was provided for the process development of liquid-filled capsules using low-viscosity oils. © 2011 American Association of Pharmaceutical Scientists

Research Center for Optical Physics: Education and Technology for the 21st Century

NASA Technical Reports Server (NTRS)

2003-01-01

During the past eleven years since its inception, RCOP has excelled in its two primary goals: 1) training of the scientists and engineers needed for the twenty-first century with special emphasis on underrepresented citizens and 2) research and technological development in areas of relevance to NASA. In the category of research training, as of May 2003, RCOP produced 36 Bachelors degrees, 25 Masters degrees, and 13 Doctoral degrees. Of these, all 36 Bachelors degrees, 16 of the Masters degrees and 9 of the Doctoral degrees were awarded to African Americans. Four of the Doctoral graduates and one of the Masters graduates are working at NASA Field Centers. RCOP has also provided research experiences to 130 undergraduate students and 22 high school students through a number of outreach programs held during the summer and the academic year. RCOP has also been crucial to the development of the Ph.D. program in physics at Hampton University by providing high quality research training and technical electives required for a Doctoral degree in physics. RCOP has also excelled in research and technological development. Since 1992, RCOP researchers have leveraged over 8 million dollars in additional research funding, published 152 papers in refereed journals and proceedings, and given 125 presentations at refereed international conferences in the United States and eight other countries. RCOP also developed numerous collaborations with other research centers, universities and industries. In recognition of this outstanding work, RCOP is the first research center in the United States invited to join the Joint Open Laboratory for Laser Crystals and Precise Laser Systems headed by Dr. Alexander Kaminiskii of the Russian Academy of Sciences.

Go to Community College, Earn a Bachelor's Degree: Florida Likes that Combination

ERIC Educational Resources Information Center

Gonzalez, Jennifer

2012-01-01

In early 2000, Florida's workforce wasn't keeping pace with demand. The state decided that a then-novel credential, a bachelor's degree from a community college, was the solution. The plan is working. The new bachelor's degrees initially focused on education, health care, and information technology. Even as the job market has shrunk, demand has…

New Pathways to a Degree. Project Evaluation: First Year Report.

ERIC Educational Resources Information Center

Markwood, Richard A., Ed.; Johnstone, Sally M., Ed.

The first year's observations of projects funded by the Annenberg/Corporation for Public Broadcasting in its New Pathways to a Degree project are summarized. The project was designed to help colleges use technologies to develop academic degree programs that are accessible to the new majority of learners, those who have jobs, home responsibilities,…

Defining Competencies for Associate Degree Nursing Education and Practice. Proceedings of the Midwest Regional Conference on "The Associate Degree Nursing--Facilitating Competency Development" Project (Chicago, Illinois, March 10-11, 1983).

ERIC Educational Resources Information Center

Minckley, Barbara B., Ed.; Walters, Mary Dale, Ed.

Focusing on "Associate Degree Nursing--Facilitating Competency Development," a 3-year project sponsored by the Midwest Alliance in Nursing (MAIN) to explore and recommend ways of strengthening Associate Degree Nursing (ADN) education and service, these proceedings contain papers by individuals involved with the development of the project and those…

NLN: Celebrating Associate Degree Nursing.

ERIC Educational Resources Information Center

Hoddick, Nancy A.

1981-01-01

Introduces a project celebrating the thirtieth anniversary of associate degree nursing (ADN) education. Reviews the efforts and plans of two national associations to identify and resolve recurring ADN issues and recognize the associate degree nurse's contributions. Describes the forums and publications planned to meet these objectives. Includes…

Effects of nurse staffing, work environments, and education on patient mortality: an observational study.

PubMed

Cho, Eunhee; Sloane, Douglas M; Kim, Eun-Young; Kim, Sera; Choi, Miyoung; Yoo, Il Young; Lee, Hye Sun; Aiken, Linda H

2015-02-01

While considerable evidence has been produced showing a link between nursing characteristics and patient outcomes in the U.S. and Europe, little is known about whether similar associations are present in South Korea. To examine the effects of nurse staffing, work environment, and education on patient mortality. This study linked hospital facility data with staff nurse survey data (N=1024) and surgical patient discharge data (N=76,036) from 14 high-technology teaching hospitals with 700 or more beds in South Korea, collected between January 1, 2008 and December 31, 2008. Logistic regression models that corrected for the clustering of patients in hospitals were used to estimate the effects of the three nursing characteristics on risk-adjusted patient mortality within 30 days of admission. Risk-adjusted models reveal that nurse staffing, nurse work environments, and nurse education were significantly associated with patient mortality (OR 1.05, 95% CI 1.00-1.10; OR 0.52, 95% CI 0.31-0.88; and OR 0.91, CI 0.83-0.99; respectively). These odds ratios imply that each additional patient per nurse is associated with an 5% increase in the odds of patient death within 30 days of admission, that the odds of patient mortality are nearly 50% lower in the hospitals with better nurse work environments than in hospitals with mixed or poor nurse work environments, and that each 10% increase in nurses having Bachelor of Science in Nursing Degree is associated with a 9% decrease in patient deaths. Nurse staffing, nurse work environments, and percentages of nurses having Bachelor of Science in Nursing Degree in South Korea are associated with patient mortality. Improving hospital nurse staffing and work environments and increasing the percentages of nurses having Bachelor of Science in Nursing Degree would help reduce the number of preventable in-hospital deaths. Copyright © 2014 Elsevier Ltd. All rights reserved.

Delivering Value In A Global Aerospace Manufacturer Through The Effective Use Of Numerical Process Simulation

NASA Astrophysics Data System (ADS)

Ward, M. J.; Walløe, S. J.

2004-06-01

Numerical models are used extensively in the aerospace sector to identify appropriate manufacturing parameters, and to minimize the risk associated with new product introduction and manufacturing change. This usage is equally prevalent in original equipment manufacturers (OEMs), and in their supply chains. The wide range of manufacturing processes and production environments involved, coupled with the varying degrees of technology maturity associated with numerical models of different processes leads to a situation of significant complexity from the OEM perspective. In addition, the intended use of simulation technology can vary considerably between applications, from simple geometric assessment of die shape at one extreme, to full process design or development at the other. Consequently there is an increasing trend towards multi-scale modelling, i.e. the use of several different model types, with differing attributes in terms of accuracy and speed to support a range of different new product introduction decisions. This makes the allocation of appropriate levels of activity to the research and implementation of new capabilities a difficult problem. This paper uses a number of industrial cases studies to illustrate a framework for making such allocation decisions such that value to the OEM is maximized, and investigates how such a framework is likely to shift over the next few years based on technological developments.

Development of a Risk-Based Comparison Methodology of Carbon Capture Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Engel, David W.; Dalton, Angela C.; Dale, Crystal

2014-06-01

Given the varying degrees of maturity among existing carbon capture (CC) technology alternatives, an understanding of the inherent technical and financial risk and uncertainty associated with these competing technologies is requisite to the success of carbon capture as a viable solution to the greenhouse gas emission challenge. The availability of tools and capabilities to conduct rigorous, risk–based technology comparisons is thus highly desirable for directing valuable resources toward the technology option(s) with a high return on investment, superior carbon capture performance, and minimum risk. To address this research need, we introduce a novel risk-based technology comparison method supported by anmore » integrated multi-domain risk model set to estimate risks related to technological maturity, technical performance, and profitability. Through a comparison between solid sorbent and liquid solvent systems, we illustrate the feasibility of estimating risk and quantifying uncertainty in a single domain (modular analytical capability) as well as across multiple risk dimensions (coupled analytical capability) for comparison. This method brings technological maturity and performance to bear on profitability projections, and carries risk and uncertainty modeling across domains via inter-model sharing of parameters, distributions, and input/output. The integration of the models facilitates multidimensional technology comparisons within a common probabilistic risk analysis framework. This approach and model set can equip potential technology adopters with the necessary computational capabilities to make risk-informed decisions about CC technology investment. The method and modeling effort can also be extended to other industries where robust tools and analytical capabilities are currently lacking for evaluating nascent technologies.« less

Successes and Challenges of Vaccines to Prevent HPV-associated Cancers

Cancer.gov

Dr. John T. Schiller received his bachelor’s degree in Molecular Biology from the University of Wisconsin, Madison in 1975, and his master’s and PhD degrees in Microbiology from the University of Washington, Seattle, in 1978 and 1982, respectively. He is currently a NIH Distinguished Investigator and Section Chief in the Laboratory of Cellular Oncology, Center for Cancer Research, National Cancer Institute, Bethesda, MD. In his 35 years at the NCI, Dr. Schiller has studied various aspects of papillomavirus molecular biology, immunology, and epidemiology The laboratory headed by Dr. Schiller and Dr. Lowy led in the discovery, characterization, and clinical testing of virus-like particle (VLP) vaccines to prevent the HPV infections that cause cervical and other cancers. They have facilitated technology transfer to potential HPV vaccine manufactures in developing countries and provided leadership in promoting global public health issues related to the implementation of HPV vaccination. They have received numerous awards for this work including the 2007 Sabin Gold Medal Award, the 2014 National Medal of Technology and Innovation, and the 2017 Lasker~DeBakey Clinical Medical Research Award. Dr. Schiller’s current interests include basic studies of papillomavirus virion assembly and infection, the development of 2 generation HPV vaccines, and vaccines and therapies for other infectious diseases and cancers.  

Diploma Training for Chemical Technicians in Australia

NASA Astrophysics Data System (ADS)

Lampard, Mark G.

1999-07-01

We describe aspects of the present and past training of chemical technicians in Australia, with particular reference to that for senior technicians, technical officers, and those anticipating a career in laboratory management (i.e., diploma courses). We refer to the present study pathways for beginning science technicians leading to a full-time (or part-time equivalent) diploma course offered either by the State Departments of Technical and Further Education (TAFE) or by the universities. Credit for appropriate diploma subjects towards a university science degree is available. We emphasize the national unified nature of training according to the Australian Qualifications Framework (AQF), which sets syllabi for subjects in conjunction with the Australian Standards Framework (ASF) levels that depend on such factors as breadth, depth, and complexity of skills and knowledge, range of activities undertaken, degree to which tasks are routine or complex, level of judgment required, and level of autonomy and responsibility for others. Recognition of the two-year diploma with suitable chemical laboratory or technology experience is through the Royal Australian Chemical Institute (RACI), and the letters AT (Associate Technician) RACI denote the new grade of membership of the RACI, the equivalent of the ACS in America. Sample structures for a Certificate IV and Diploma of Chemical Laboratory Technology are given.

San Diego Community College District Degree and Certificate Report, 2002 Awards.

ERIC Educational Resources Information Center

San Diego Community Coll. District, CA. Research and Planning.

This report provides a descriptive analysis of the degree and certificate programs in the San Diego Community College District (SDCCD). In 2002, nearly 4,000 associate degrees were awarded by the three community colleges in the district. The associate degree program has a 60-unit requirement and includes both the associate in arts and the…

Articulation to and from the Applied Associate Degree: Challenges and Opportunities

ERIC Educational Resources Information Center

Ignash, Jan M.

2012-01-01

This chapter discusses the "tangled knot" of articulating associate degrees in applied fields and reviews sample programs from applied associate (A.A.S.) to baccalaureate degrees using three distinct pathways, comparing the resulting A.A.S. to baccalaureate degree pathways to similar B.A. or B.S. programs. It focuses predominantly on curricular…

The Challenges for Persistence with Two-Year College Student Transfers and How One Survey Attempts to Identify Pathways of Success for Geoscience Students

NASA Astrophysics Data System (ADS)

Wilson, C. E.; Van Der Hoeven Kraft, K.; Wolfe, B.

2014-12-01

With the rapid growth in enrollments at two-year colleges (2YCs), these institutions provide a rich talent pool for future science, technology, engineering, and math (STEM) graduates at four-year universities, particularly students from underrepresented groups (American Geosciences Institute [AGI], 2014). This is particularly true for the geosciences because over 25% of recent geoscience graduates with a bachelor's degree attended a 2YC for at least one semester (AGI, 2013). However, it is difficult to successfully track 2YC transfers because many 2YC students do not complete an associate's degree and very few institutions offer a geoscience-specific associate's degree. In order to recruit future geoscientists from this pool of students, researchers need to better understand the barriers these students face when trying to transfer and how they are able to successfully navigate these barriers. During spring 2014 graduation, AGI surveyed students completing their bachelor's, master's, and doctoral degrees about their educational background, experiences and future plans after graduation. Those graduates who attended a 2YC for at least one semester provided insight into their enrollment decisions as they transferred into a four-year university. The sample from this survey represents 154 responses from a total of 596 responses. General demographics reveal an older population (average age: 30, median: 27), a higher percent of male students (54% male, 40% female) and Caucasians (76%, 10% non Caucasian) than a traditional 2YC student. Students attending 2YC nationally are on average 28 years old (median: 24), are 57% women, and are 51% Caucasian (AACC Fast Facts, 2014). In addition, responses indicated some of the factors that influenced their ability to successfully transfer into 4-year geoscience programs including personal motivation and successful transfer of credits.

Analyzing the Degree of Technology Use Occurring in Pre-Service Teacher Education

ERIC Educational Resources Information Center

Stobaugh, Rebecca Ruth; Tassell, Janet Lynne

2011-01-01

Technology is not in the forefront of teacher education program thinking and planning. Yet, it is the tool dramatically changing education. Internationally, the role of technology has evolved from the role of assisting the teacher in personal management to using technology for instruction. To respond to this need, universities are altering courses…

Safety Early Warning Research for Highway Construction Based on Case-Based Reasoning and Variable Fuzzy Sets

PubMed Central

Liu, Yan; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established. PMID:24191134

Safety early warning research for highway construction based on case-based reasoning and variable fuzzy sets.

PubMed

Liu, Yan; Yi, Ting-Hua; Xu, Zhen-Jun

2013-01-01

As a high-risk subindustry involved in construction projects, highway construction safety has experienced major developments in the past 20 years, mainly due to the lack of safe early warnings in Chinese construction projects. By combining the current state of early warning technology with the requirements of the State Administration of Work Safety and using case-based reasoning (CBR), this paper expounds on the concept and flow of highway construction safety early warnings based on CBR. The present study provides solutions to three key issues, index selection, accident cause association analysis, and warning degree forecasting implementation, through the use of association rule mining, support vector machine classifiers, and variable fuzzy qualitative and quantitative change criterion modes, which fully cover the needs of safe early warning systems. Using a detailed description of the principles and advantages of each method and by proving the methods' effectiveness and ability to act together in safe early warning applications, effective means and intelligent technology for a safe highway construction early warning system are established.

Ultrasound features of polycystic ovaries relate to degree of reproductive and metabolic disturbance in polycystic ovary syndrome.

PubMed

Christ, Jacob P; Vanden Brink, Heidi; Brooks, Eric D; Pierson, Roger A; Chizen, Donna R; Lujan, Marla E

2015-03-01

To reexamine associations between polycystic ovarian morphology (PCOM) and degree of symptomatology in polycystic ovary syndrome (PCOS) using a well-defined PCOS population, newer ultrasound technology, and reliable offline assessments of sonographic parameters. Cross-sectional observational study. Academic hospital and clinical research unit. Forty-nine women with PCOS as defined by hyperandrogenism and oligoamenorrhea. None. Number of follicles per follicle size category, antral follicle count (AFC), ovarian volume (OV), follicle distribution pattern, stromal area, ovarian area, stromal to ovarian area ratio (S/A) and stromal echogenicity index (SI), total (TT), androstenedione, LH, FSH, cholesterol, triglycerides, low-density lipoprotein, high-density lipoprotein, C-reactive protein, glucose, insulin, and hemoglobin A1C, menstrual cycle length, hirsutism score, body mass index (BMI), waist:hip ratio, and blood pressure. AFC, but not OV, was positively associated with TT (ρ = .610), androstenedione (ρ = .490), and LH:FSH (ρ = .402). SI was positively associated with androgen markers and LH:FSH, while S/A was negatively associated with these variables. Follicles ≤4 mm were negatively associated with various metabolic markers, whereas larger follicles (5-8 mm) showed positive associations. Stromal markers were not associated with cardiometabolic measures. LH:FSH best predicted follicles ≤4 mm, and BMI predicted 5- to 9-mm follicles. Dominant follicles ≥10 mm were best predicted by age. AFC, and not OV, reflected the severity of reproductive dysfunction in PCOS. Associations among different sized follicles were consistent with recruitable sized follicles, which reflects the severity of metabolic dysfunction in PCOS. Copyright © 2015 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

The current impact of entry-level associate and baccalaureate degree education on the diversity of respiratory therapists.

PubMed

Becker, Ellen A; Nguyen, Xuan T

2014-12-01

Transitioning from an associate degree to a baccalaureate degree for respiratory therapists has been suggested as a new entry-level educational standard. One potential risk for this change is that it may limit the diversity of potential applicants for entry-level education. A diverse workforce is important to achieve the goal of reducing healthcare disparities. This study evaluated characteristics of therapists who completed associate and baccalaureate degree entry-level education. A secondary analysis of data collected from the 2009 AARC Respiratory Therapist Human Resource Survey explored relationships between the choice of entry-level associate or baccalaureate education and variables of gender, race, salary, career advancement, and job satisfaction. There were no differences between therapists with entry-level associate and baccalaureate degrees in gender, race, number of additional healthcare credentials, numbers of life support credentials, wages, delivering respiratory care by protocol, and job satisfaction. There were significantly higher percentages of advanced academic degrees, desire to pursue a higher academic degree, registered respiratory therapist credentials, total National Board for Respiratory Care credentials, and leadership roles for therapists with baccalaureate entry-level degrees. Current entry-level associate and baccalaureate degree graduates have similar gender and race proportions. This finding challenges concerns that an entry-level baccalaureate degree would decrease the diversity of the respiratory therapist workforce. Copyright © 2014 by Daedalus Enterprises.

Technology and Meteorology. An Action Research Paper.

ERIC Educational Resources Information Center

Taggart, Raymond F.

Meteorology, the science of weather and weather conditions, has traditionally been taught via textbook and rote demonstration. This study was intended to determine to what degree utilizing technology in the study of meteorology improves students' attitudes towards science and to measure to what extent technology in meteorology increases…

40 CFR 434.52 - Effluent limitations quidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... technology currently available (BPT). 434.52 Section 434.52 Protection of Environment ENVIRONMENTAL... practicable control technology currently available (BPT). (a) Reclamation areas. The limitations in this... this subsection after application of the best practicable control technology currently available: BPT...

40 CFR 440.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available (BPT). 440.52 Section 440.52 Protection of Environment ENVIRONMENTAL... reduction attainable by the application of the best practicable control technology currently available (BPT... effluent reduction attainable after application of the best practicable control technology currently...

40 CFR 434.52 - Effluent limitations quidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... technology currently available (BPT). 434.52 Section 434.52 Protection of Environment ENVIRONMENTAL... practicable control technology currently available (BPT). (a) Reclamation areas. The limitations in this... this subsection after application of the best practicable control technology currently available: BPT...

40 CFR 434.52 - Effluent limitations quidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technology currently available (BPT). 434.52 Section 434.52 Protection of Environment ENVIRONMENTAL... practicable control technology currently available (BPT). (a) Reclamation areas. The limitations in this... this subsection after application of the best practicable control technology currently available: BPT...

40 CFR 436.32 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technology currently available. 436.32 Section 436.32 Protection of Environment ENVIRONMENTAL PROTECTION... effluent reduction attainable by the application of the best practicable control technology currently... of the best practicable control technology currently available (BPT): (1) Discharges of process...

40 CFR 434.52 - Effluent limitations quidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2012 CFR

2012-07-01

... technology currently available (BPT). 434.52 Section 434.52 Protection of Environment ENVIRONMENTAL... practicable control technology currently available (BPT). (a) Reclamation areas. The limitations in this... this subsection after application of the best practicable control technology currently available: BPT...

40 CFR 434.52 - Effluent limitations quidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available (BPT). 434.52 Section 434.52 Protection of Environment ENVIRONMENTAL... practicable control technology currently available (BPT). (a) Reclamation areas. The limitations in this... this subsection after application of the best practicable control technology currently available: BPT...

40 CFR 440.52 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technology currently available (BPT). 440.52 Section 440.52 Protection of Environment ENVIRONMENTAL... reduction attainable by the application of the best practicable control technology currently available (BPT... effluent reduction attainable after application of the best practicable control technology currently...

40 CFR 436.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 436.22 Section 436.22 Protection of Environment ENVIRONMENTAL PROTECTION... reduction attainable by the application of the best practicable control technology currently available. (a... best practicable control technology currently available (BPT): (1) Discharges of process generated...

40 CFR 436.22 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2011 CFR

2011-07-01

... technology currently available. 436.22 Section 436.22 Protection of Environment ENVIRONMENTAL PROTECTION... reduction attainable by the application of the best practicable control technology currently available. (a... best practicable control technology currently available (BPT): (1) Discharges of process generated...

Effect of nickel silicide gettering on metal-induced crystallized polycrystalline-silicon thin-film transistors

NASA Astrophysics Data System (ADS)

Kim, Hyung Yoon; Seok, Ki Hwan; Chae, Hee Jae; Lee, Sol Kyu; Lee, Yong Hee; Joo, Seung Ki

2017-06-01

Low-temperature polycrystalline-silicon (poly-Si) thin-film transistors (TFTs) fabricated via metal-induced crystallization (MIC) are attractive candidates for use in active-matrix flat-panel displays. However, these exhibit a large leakage current due to the nickel silicide being trapped at the grain boundaries of the poly-Si. We reduced the leakage current of the MIC poly-Si TFTs by developing a gettering method to remove the Ni impurities using a Si getter layer and natively-formed SiO2 as the etch stop interlayer. The Ni trap state density (Nt) in the MIC poly-Si film decreased after the Ni silicide gettering, and as a result, the leakage current of the MIC poly-Si TFTs decreased. Furthermore, the leakage current of MIC poly-Si TFTs gradually decreased with additional gettering. To explain the gettering effect on MIC poly-Si TFTs, we suggest an appropriate model. He received the B.S. degree in School of Advanced Materials Engineering from Kookmin University, Seoul, South Korea in 2012, and the M.S. degree in Department of Materials Science and Engineering from Seoul National University, Seoul, South Korea in 2014. He is currently pursuing the Ph.D. degree with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and top-gate polycrystalline-silicon thin-film transistors. He received the M.S. degree in innovation technology from Ecol Polytechnique, Palaiseau, France in 2013. He is currently pursuing the Ph.D. degree with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and bottom-gate polycrystalline-silicon thin-film transistors. He is currently pursuing the integrated M.S and Ph.D course with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and copper-gate polycrystalline-silicon thin-film transistors. He is currently pursuing the integrated M.S and Ph.D course with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and bottom-gate polycrystalline-silicon thin-film transistors. He is currently pursuing the integrated M.S and Ph.D course with the Department of Materials Science and Engineering, Seoul National University, Seoul. He is involved in semiconductor device fabrication technology and bottom-gate polycrystalline-silicon thin-film transistors. He received the B.S. degree in metallurgical engineering from Seoul National University, Seoul, South Korea, in 1974, and the M.S. and Ph.D. degrees in material science and engineering from Stanford University, Stanford, CA, USA, in 1980 and 1983, respectively. He is currently a Professor with the Department of Materials Science and Engineering, Seoul National University, Seoul.

[Optimization of dissolution process for superfine grinding technology on total saponins of Panax ginseng fibrous root by response surface methodology].

PubMed

Zhao, Ya; Lai, Xiao-Pin; Yao, Hai-Yan; Zhao, Ran; Wu, Yi-Na; Li, Geng

2014-03-01

To investigate the effects of superfine comminution extraction technology of ginseng total saponins from Panax ginseng fibrous root, and to make sure the optimal extraction condition. Optimal condition of ginseng total saponins from Panax ginseng fibrous root was based on single factor experiment to study the effects of crushing degree, extraction time, alcohol concentration and extraction temperature on extraction rate. Response surface method was used to investigate three main factors such as superfine comminution time, extraction time and alcohol concentration. The relationship between content of ginseng total saponins in Panax ginseng fibrous root and three factors fitted second degree polynomial models. The optimal extraction condition was 9 min of superfine comminution time, 70% of alcohol, 50 degrees C of extraction temperature and 70 min of extraction time. Under the optimal condition, ginseng total saponins from Panax ginseng fibrous root was average 94. 81%, which was consistent with the predicted value. The optimization of technology is rapid, efficient, simple and stable.

Modeling the coevolution of topology and traffic on weighted technological networks

NASA Astrophysics Data System (ADS)

Xie, Yan-Bo; Wang, Wen-Xu; Wang, Bing-Hong

2007-02-01

For many technological networks, the network structures and the traffic taking place on them mutually interact. The demands of traffic increment spur the evolution and growth of the networks to maintain their normal and efficient functioning. In parallel, a change of the network structure leads to redistribution of the traffic. In this paper, we perform an extensive numerical and analytical study, extending results of Wang [Phys. Rev. Lett. 94, 188702 (2005)]. By introducing a general strength-coupling interaction driven by the traffic increment between any pair of vertices, our model generates networks of scale-free distributions of strength, weight, and degree. In particular, the obtained nonlinear correlation between vertex strength and degree, and the disassortative property demonstrate that the model is capable of characterizing weighted technological networks. Moreover, the generated graphs possess both dense clustering structures and an anticorrelation between vertex clustering and degree, which are widely observed in real-world networks. The corresponding theoretical predictions are well consistent with simulation results.

Forming Master's Degree Students' ICT Competencies as Future Researchers and Educators: A Kazakhstan Case Study

ERIC Educational Resources Information Center

Abykenova, Dariya Bolatovna; Assainova, Almagul Zhayakovna; Burdina, Elena Ivanovna; Murphy, Anne; Abibulayeva, Aizhan Budanovna

2016-01-01

This article analyses the information and communications technology competencies (ICTC) of Master's degree students in Kazakhstan. It defines the ICTC. Research results suggest that the majority of Master's degree students have a low level of ICTC. Of prime importance is the fact that the level of research and educational aspects of the ICTC of…

The Impact of College Experiences on Degree Completion in STEM Fields at Four-Year Institutions: Does Gender Matter?

ERIC Educational Resources Information Center

Gayles, Joy Gaston; Ampaw, Frim

2014-01-01

Degree attainment at the undergraduate level for women in science, technology, engineering, and mathematics (STEM) continues to be an issue of national concern, particularly when trying to explain disparaging gender differences in persistence. Thus, the purpose of this study was to examine factors that influence degree attainment for students in…

Where are the women? Campus climate and the degree aspirations of women in science, technology, engineering and mathematics programs

NASA Astrophysics Data System (ADS)

Schulz, Phyllis

Women remain underrepresented in science, technology, engineering, and mathematics (STEM) at all levels of higher education, which has become a concern in the competitive global marketplace. Using both quantitative and qualitative analysis, this dissertation sought to learn more about how the campus climate and self-concept influence the degree aspirations of female undergraduate students majoring in STEM programs. Using the Beginning Post-Secondary dataset, regression analyses showed that a student's initial degree aspirations, SAT scores, and interactions with faculty were all positively related to their degree aspirations three years later. Interviews with seven current STEM undergraduates confirmed the importance of interaction with faculty and suggested undergraduate research and classroom experiences also play a role in the degree aspirations of STEM students. Three of the seven students interviewed began their undergraduate educations as non-STEM majors, suggesting that the traditional STEM pipeline may no longer be the norm. These findings suggest that both future research and current practitioners should focus on undergraduate STEM classroom and research experiences. Additionally, the characteristics of students who switch into STEM majors should be explored so that we may continue to expand the number of students pursuing STEM degrees.

Second-Degree Learners in Associate Degree Nursing Programs: Characteristics and Progression Success

ERIC Educational Resources Information Center

McGinley, Patricia M.

2013-01-01

Second degree learners are attending associate (ADN), accelerated baccalaureate (BSN), and entry level masters (ELM) degree nursing programs. There is limited data related to the socio-demographic characteristics and graduation success rates of students attending accelerated BSN or ELM programs and no data related to second-degree learners…

40 CFR 414.42 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 414.42 Section 414.42 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.97 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.97 Section 410.97 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.67 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.67 Section 410.67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.17 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.17 Section 410.17 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 414.22 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 414.22 Section 414.22 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 414.52 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 414.52 Section 414.52 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 464.47 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology. [Reserved] 464.47 Section 464.47 Protection of Environment ENVIRONMENTAL PROTECTION... attainable by the application of the best conventional pollutant control technology. [Reserved] ...

40 CFR 414.32 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 414.32 Section 414.32 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 467.67 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology. [Reserved] 467.67 Section 467.67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best conventional pollutant control technology. [Reserved] ...

40 CFR 410.77 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.77 Section 410.77 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.27 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.27 Section 410.27 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.47 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.47 Section 410.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.37 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.37 Section 410.37 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.87 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.87 Section 410.87 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

40 CFR 410.57 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology (BCT). [Reserved] 410.57 Section 410.57 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... application of the best conventional pollutant control technology (BCT). [Reserved] ...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... education leading to a baccalaureate degree in a premedicine, preoptometry, predentistry, preosteopathy..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology, dietitian, nutritionist, social work, health education, physical therapy, occupational therapy and pharmacy...

Biomass torrefaction: A promising pretreatment technology for biomass utilization

NASA Astrophysics Data System (ADS)

Chen, ZhiWen; Wang, Mingfeng; Ren, Yongzhi; Jiang, Enchen; Jiang, Yang; Li, Weizhen

2018-02-01

Torrefaction is an emerging technology also called mild pyrolysis, which has been explored for the pretreatment of biomass to make the biomass more favorable for further utilization. Dry torrefaction (DT) is a pretreatment of biomass in the absence of oxygen under atmospheric pressure and in a temperature range of 200-300 degrees C, while wet torrrefaction (WT) is a method in hydrothermal or hot and high pressure water at the tempertures within 180-260 degrees C. Torrrefied biomass is hydrophobic, with lower moisture contents, increased energy density and higher heating value, which are more comparable to the characteristics of coal. With the improvement in the properties, torrefied biomass mainly has three potential applications: combustion or co-firing, pelletization and gasification. Generally, the torrefaction technology can accelerate the development of biomass utilization technology and finally realize the maximum applications of biomass energy.

The Development of Educational Technology.

ERIC Educational Resources Information Center

Sakamoto, Takashi

The degree to which the concepts of educational technolgoy are penetrating into educational practice in Japan is surveyed. Educational technology is defined as a branch of study in which the results of engineering techniques, information science, the natural sciences, the behavioral sciences and human technology are used to promote efficiency in…

40 CFR 449.10 - Effluent limitations representing the best available technology economically achievable (BAT).

Code of Federal Regulations, 2012 CFR

2012-07-01

... best available technology economically achievable (BAT). 449.10 Section 449.10 Protection of... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any... following requirements representing the degree of effluent reduction attainable by the application of BAT...

40 CFR 449.10 - Effluent limitations representing the best available technology economically achievable (BAT).

Code of Federal Regulations, 2014 CFR

2014-07-01

... best available technology economically achievable (BAT). 449.10 Section 449.10 Protection of... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any... following requirements representing the degree of effluent reduction attainable by the application of BAT...

40 CFR 449.10 - Effluent limitations representing the best available technology economically achievable (BAT).

Code of Federal Regulations, 2013 CFR

2013-07-01

... best available technology economically achievable (BAT). 449.10 Section 449.10 Protection of... available technology economically achievable (BAT). Except as provided in 40 CFR 125.30 through 125.32, any... following requirements representing the degree of effluent reduction attainable by the application of BAT...

CIS and Information Technology Certifications: Education Program Trends and Implications

ERIC Educational Resources Information Center

Andersson, David; Reimers, Karl

2009-01-01

The fields of Computer Information Systems (CIS) and Information Technology (IT) are experiencing rapid change. In 2003, an analysis of IT degree programs and those of competing disciplines at 10 post-secondary institutions concluded that an information technology program is perceived differently from information systems and computer science. In…

40 CFR 426.27 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... conventional pollutant control technology: There shall be no discharge of process waste water pollutants to... control technology. 426.27 Section 426.27 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... attainable by the application of the best conventional pollutant control technology. The following...

40 CFR 418.62 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 418.62 Section 418.62 Protection of Environment ENVIRONMENTAL PROTECTION... effluent reduction attainable by the application of the best practicable control technology currently... attainable by the application of the best practicable control technology currently available (BPT): There...

40 CFR 418.77 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... conventional pollutant control technology: There shall be no discharge of process waste water pollutants to... control technology. 418.77 Section 418.77 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... effluent reduction attainable by the application of the best conventional pollutant control technology. The...

40 CFR 436.322 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 436.322 Section 436.322 Protection of Environment ENVIRONMENTAL PROTECTION... reduction attainable by the application of the best practicable control technology currently available... application of the best practicable control technology currently available (BPT): For operations not employing...

40 CFR 436.112 - Effluent limitations guidelines representing the degree of effluent reduction attainable by the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... technology currently available. 436.112 Section 436.112 Protection of Environment ENVIRONMENTAL PROTECTION... reduction attainable by the application of the best practicable control technology currently available... application of the best practicable control technology currently available (BPT): For operations not employing...