75 FR 51180 - Safety Zone; AVI September Fireworks Display, Laughlin, Nevada, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-19

...-AA00 Safety Zone; AVI September Fireworks Display, Laughlin, Nevada, NV AGENCY: Coast Guard, DHS... waters of the lower Colorado River, Laughlin, NV, in support of a fireworks display near the AVI Resort... Zone; AVI September Fireworks Display; Laughlin, Nevada, NV in the Federal Register (75 FR 23206). We...

The formation of Anthocyanic Vacuolar Inclusions in Arabidopsis thaliana and implications for the sequestration of anthocyanin pigments.

PubMed

Pourcel, Lucille; Irani, Niloufer G; Lu, Yuhua; Riedl, Ken; Schwartz, Steve; Grotewold, Erich

2010-01-01

Anthocyanins are flavonoid pigments that accumulate in the large central vacuole of most plants. Inside the vacuole, anthocyanins can be found uniformly distributed or as part of sub-vacuolar pigment bodies, the Anthocyanic Vacuolar Inclusions (AVIs). Using Arabidopsis seedlings grown under anthocyanin-inductive conditions as a model to understand how AVIs are formed, we show here that the accumulation of AVIs strongly correlates with the formation of cyanidin 3-glucoside (C3G) and derivatives. Arabidopsis mutants that fail to glycosylate anthocyanidins at the 5-O position (5gt mutant) accumulate AVIs in almost every epidermal cell of the cotyledons, as compared to wild-type seedlings, where only a small fraction of the cells show AVIs. A similar phenomenon is observed when seedlings are treated with vanadate. Highlighting a role for autophagy in the formation of the AVIs, we show that various mutants that interfere with the autophagic process (atg mutants) display lower numbers of AVIs, in addition to a reduced accumulation of anthocyanins. Interestingly, vanadate increases the numbers of AVIs in the atg mutants, suggesting that several pathways might participate in AVI formation. Taken together, our results suggest novel mechanisms for the formation of sub-vacuolar compartments capable of accumulating anthocyanin pigments.

The role of repeating optimization of atrioventricular interval during interim and long-term follow-up after cardiac resynchronization therapy.

PubMed

Zhang, Qing; Fung, Jeffrey Wing-Hong; Chan, Yat-Sun; Chan, Hamish Chi-Kin; Lin, Hong; Chan, Skiva; Yu, Cheuk-Man

2008-02-29

Cardiac resynchronization therapy (CRT) is an effective therapy for heart failure patients with electromechanical delay. Optimization of atrioventricular interval (AVI) is a cardinal component for the benefits. However, it is unknown if the AVI needs to be re-optimized during long-term follow-up. Thirty-one patients (66+/-11 years, 20 males) with sinus rhythm who received CRT underwent serial optimization of AVI at day 1, 3-month and during long-term follow-up by pulse Doppler echocardiography (PDE). At long-term follow-up, the optimal AVI and cardiac output (CO) estimated by non-invasive impedance cardiography (ICG) were compared with those by PDE. The follow-up was 16+/-11 months. There was no significant difference in the mean optimal AVI when compared between any 2 time points among day 1 (99+/-30 ms), 3-month (97+/-28 ms) and long-term follow-up (94+/-28 ms). However, in individual patient, the optimal AVI remained unchanged only in 14 patients (44%), and was shortened in 12 (38%) and lengthened in 6 patients (18%). During long-term follow-up, although the mean optimal AVIs obtained by PDE or ICG (94+/-28 vs. 92+/-29 ms) were not different, a discrepancy was found in 14 patients (45%). For the same AVI, the CO measured by ICG was systematically higher than that by PDE (3.5+/-0.8 Vs. 2.7+/-0.6 L/min, p<0.001). Optimization of AVI after CRT appears necessary during follow-up as it was readjusted in 55% of patients. Although AVI optimization by ICG was feasible, further studies are needed to confirm its role in optimizing AVI after CRT.

Cloning of an avilamycin biosynthetic gene cluster from Streptomyces viridochromogenes Tü57.

PubMed Central

Gaisser, S; Trefzer, A; Stockert, S; Kirschning, A; Bechthold, A

1997-01-01

A 65-kb region of DNA from Streptomyces viridochromogenes Tü57, containing genes encoding proteins involved in the biosynthesis of avilamycins, was isolated. The DNA sequence of a 6.4-kb fragment from this region revealed four open reading frames (ORF1 to ORF4), three of which are fully contained within the sequenced fragment. The deduced amino acid sequence of AviM, encoded by ORF2, shows 37% identity to a 6-methylsalicylic acid synthase from Penicillium patulum. Cultures of S. lividans TK24 and S. coelicolor CH999 containing plasmids with ORF2 on a 5.5-kb PstI fragment were able to produce orsellinic acid, an unreduced version of 6-methylsalicylic acid. The amino acid sequence encoded by ORF3 (AviD) is 62% identical to that of StrD, a dTDP-glucose synthase from S. griseus. The deduced amino acid sequence of AviE, encoded by ORF4, shows 55% identity to a dTDP-glucose dehydratase (StrE) from S. griseus. Gene insertional inactivation experiments of aviE abolished avilamycin production, indicating the involvement of aviE in the biosynthesis of avilamycins. PMID:9335272

Genotype-Specific Regulation of Oral Innate Immunity by T2R38 Taste Receptor

PubMed Central

Gil, Sucheol; Coldwell, Susan; Drury, Jeanie L.; Arroyo, Fabiola; Phi, Tran; Saadat, Sanaz; Kwong, Danny; Chung, Whasun Oh

2015-01-01

The bitter taste receptor T2R38 has been shown to regulate mucosal innate immune responses in the upper airway epithelium. Furthermore, SNPs in T2R38 influence the sensitivity to 6-n-propylthiouracil (PROP) and are associated with caries risk/protection. However, no study has been reported on the role of T2R38 in the innate immune responses to oral bacteria. We hypothesize that T2R38 regulates oral innate immunity and that this regulation is genotype-specific. Primary gingival epithelial cells carrying three common genotypes, PAV/PAV (PROP super-taster), AVI/PAV (intermediate) and AVI/AVI (non-taster) were stimulated with cariogenic bacteria Streptococcus mutans, periodontal pathogen Porphyromonas gingivalis or non-pathogen Fusobacterium nucleatum. QRT-PCR analyzed T2R38 mRNA, and T2R38-specific siRNA and ELISA were utilized to evaluate induction of hBD-2 (antimicrobial peptide), IL-1α and IL-8 in various donor-lines. Experiments were set up in duplicate and repeated three times. T2R38 mRNA induction in response to S. mutans was highest in PAV/PAV (4.3-fold above the unstimulated controls; p<0.05), while lowest in AVI/AVI (1.2-fold). In PAV/PAV, hBD-2 secretion in response to S. mutans was decreased by 77% when T2R38 was silenced. IL-1α secretion was higher in PAV/PAV compared to AVI/PAV or AVI/AVI with S. mutans stimulation, but it was reduced by half when T2R38 was silenced (p<0.05). In response to P. gingivalis, AVI/AVI showed 4.4-fold increase (p<0.05) in T2R38 expression, whereas the levels in PAV/PAV and AVI/PAV remained close to that of the controls. Secretion levels of IL-1α and IL-8 decreased in AVI/AVI in response to P. gingivalis when T2R38 was silenced (p<0.05), while the changes were not significant in PAV/PAV. Our data suggest that the regulation of gingival innate immunity by T2R38 is genotype-dependent and that the ability to induce a high level of hBD-2 by PAV/PAV carriers may be a reason for protection against caries in this group. PMID:26552761

Understanding ITS/CVO Technology Applications, Student Manual, Course 3

DOT National Transportation Integrated Search

1999-01-01

WEIGHT-IN-MOTION OR WIM, COMMERCIAL VEHICLE INFORMATION SYSTEMS AND NETWORK OR CVISN, AUTOMATIC VEHICLE IDENTIFICATION OR AVI, AUTOMATIC LOCATION OR AVL, ELECTRONIC DATA INTERCHANGE OR EDI, GLOBAL POSITIONING SYSTEM OR GPS, INTERNET OR WORLD WIDE WEB...

In-hospital outcome of transcatheter vs. surgical aortic valve replacement in patients with aortic valve stenosis: complete dataset of patients treated in 2013 in Germany.

PubMed

Möllmann, Helge; Bestehorn, Kurt; Bestehorn, Maike; Papoutsis, Konstantinos; Fleck, Eckart; Ertl, Georg; Kuck, Karl-Heinz; Hamm, Christian

2016-06-01

Transvascular (TV-AVI) or transapical (TA-AVI) aortic valve implantation (TAVI) is a treatment option for patients with aortic stenosis being at high or prohibitive risk for surgical aortic valve implantation (SAVR). Randomized data demonstrated that these subgroups can safely been treated with TAVI. However, a comparison of SAVR and TAVI in intermediate and low-risk patients is missing. Therefore, the aim of the analysis was to compare TAVI and SAVR in all patients who were treated for aortic valve stenosis in Germany throughout 1 year. The mandatory quality assurance collects data on the in-hospital outcome from all patients (n = 20,340) undergoing either SAVR or TAVI in Germany. In order to compare the different treatment approaches patients were categorized into four risk groups using the logistic EuroScore I (ES). In-hospital mortality and peri- and postprocedural complications were analyzed. The in-hospital mortality did not differ between TV-AVI and SAVR in the low risk group (ES <10 %: TV-AVI 2.4 %, SAVR 2.0 %, p = 0.302) and was significantly higher for SAVR in all other risk groups (ES 10-20 %: TV-AVI 3.5 %, SAVR 5.3 %; p = 0.025; ES 20-30 %: TV-AVI 5.5 %, SAVR 12.2 %, p < 0.001; ES >30 %: TV-AVI 6.5 %, SAVR 12.9 %, p = 0.008). TA-AVI had a significantly higher mortality in all risk groups compared to TV-AVI. In comparison to SAVR, TA-AVI had a higher mortality in patients with ES <10, comparable mortality in ES 10-20 %, and lower mortality in patients with an ES >20 %. The overall stroke rate was 2.3 %. It occurred more frequently in patients with an ES <10 % treated with a transapical approach (SAVR 1.8 %, TV-AVI 1.9 %, TA-AVI 3.1 %, p < 0.01). There were no statistically significant differences in all other comparisons. This study demonstrates that TAVI provides excellent outcomes in all risk categories. Compared with SAVR, TV-TAVI yields similar in-hospital mortality among low-risk patients and lower in-hospital mortality among intermediate and high-risk patient populations.

Complications of the access during aortic valve implantation through transfemoral access.

PubMed

Alsac, Jean-Marc; Zegdi, Rachid; Blanchard, Didier; Achouh, Paul; Cholley, Bernard; Berrebi, Alain; Julia, Pierre; Fabiani, Jean-Noël

2011-08-01

Aortic valve implantation (AVI) is a booming therapeutic option in high-risk patients with calcific aortic stenosis. Retrograde femoral approach drawbacks include vascular complications owing to the size of the introduction system (22- and 24-F).The aim of this study was to retrospectively analyze the incidence and the treatment of vascular complications in the first 2 years of transfemoral AVI experience with the first generation of Edwards SAPIEN transcatheter heart valves. Since December 2007, AVI has been performed in 71 patients, 21 times by the transapical route and 50 times by the transfemoral route through an inguinal approach with the first generation of Edwards SAPIEN transcatheter heart valves (23 and 26 mm). The incidence and the treatment of vascular complications were evaluated as main criteria for transfemoral AVI. All the procedures could be successfully performed by a femoral route, except for three cases when the introducing device could not be fixed on the thoracic aorta because of vascular access problems. Vascular access-related complications occurred in nine patients (18%), including three iliac dissections, two aortic dissections, three femoral lesions, and one thoracic aorta rupture. These complications were treated either in a conservative way (n = 2), or in an endovascular way using a contralateral approach (n = 3), or surgically through an inguinal approach (n = 3). A traumatic rupture of the thoracic aorta resulted in the death of a female patient. In our experience, transfemoral AVI gives a satisfying technical success rate in the selected patients. The incidence of complications involving the vascular access remains an important limitation of this new technique. Although a conservative or endovascular treatment can be applied in most cases, improving the introduction devices is highly expected because it would reduce the complications rate of vascular access. Copyright © 2011 Annals of Vascular Surgery Inc. Published by Elsevier Inc. All rights reserved.

Exploring the Landscape of Diazabicyclooctane (DBO) Inhibition: Avibactam Inactivation of PER-2 β-Lactamase.

PubMed

Ruggiero, Melina; Papp-Wallace, Krisztina M; Taracila, Magdalena A; Mojica, Maria F; Bethel, Christopher R; Rudin, Susan D; Zeiser, Elise T; Gutkind, Gabriel; Bonomo, Robert A; Power, Pablo

2017-06-01

PER β-lactamases are an emerging family of extended-spectrum β-lactamases (ESBL) found in Gram-negative bacteria. PER β-lactamases are unique among class A enzymes as they possess an inverted omega (Ω) loop and extended B3 β-strand. These singular structural features are hypothesized to contribute to their hydrolytic profile against oxyimino-cephalosporins (e.g., cefotaxime and ceftazidime). Here, we tested the ability of avibactam (AVI), a novel non-β-lactam β-lactamase inhibitor to inactivate PER-2. Interestingly, the PER-2 inhibition constants (i.e., k 2 / K = 2 × 10 3 ± 0.1 × 10 3 M -1 s -1 , where k 2 is the rate constant for acylation (carbamylation) and K is the equilibrium constant) that were obtained when AVI was tested were reminiscent of values observed testing the inhibition by AVI of class C and D β-lactamases (i.e., k 2 / K range of ≈10 3 M -1 s -1 ) and not class A β-lactamases (i.e., k 2 / K range, 10 4 to 10 5 M -1 s -1 ). Once AVI was bound, a stable complex with PER-2 was observed via mass spectrometry (e.g., 31,389 ± 3 atomic mass units [amu] → 31,604 ± 3 amu for 24 h). Molecular modeling of PER-2 with AVI showed that the carbonyl of AVI was located in the oxyanion hole of the β-lactamase and that the sulfate of AVI formed interactions with the β-lactam carboxylate binding site of the PER-2 β-lactamase (R220 and T237). However, hydrophobic patches near the PER-2 active site (by Ser70 and B3-B4 β-strands) were observed and may affect the binding of necessary catalytic water molecules, thus slowing acylation ( k 2 / K ) of AVI onto PER-2. Similar electrostatics and hydrophobicity of the active site were also observed between OXA-48 and PER-2, while CTX-M-15 was more hydrophilic. To demonstrate the ability of AVI to overcome the enhanced cephalosporinase activity of PER-2 β-lactamase, we tested different β-lactam-AVI combinations. By lowering MICs to ≤2 mg/liter, the ceftaroline-AVI combination could represent a favorable therapeutic option against Enterobacteriaceae expressing bla PER-2 Our studies define the inactivation of the PER-2 ESBL by AVI and suggest that the biophysical properties of the active site contribute to determining the efficiency of inactivation. Copyright © 2017 American Society for Microbiology.

Exploring the Landscape of Diazabicyclooctane (DBO) Inhibition: Avibactam Inactivation of PER-2 β-Lactamase

PubMed Central

Ruggiero, Melina; Papp-Wallace, Krisztina M.; Taracila, Magdalena A.; Mojica, Maria F.; Bethel, Christopher R.; Rudin, Susan D.; Zeiser, Elise T.; Gutkind, Gabriel

2017-01-01

ABSTRACT PER β-lactamases are an emerging family of extended-spectrum β-lactamases (ESBL) found in Gram-negative bacteria. PER β-lactamases are unique among class A enzymes as they possess an inverted omega (Ω) loop and extended B3 β-strand. These singular structural features are hypothesized to contribute to their hydrolytic profile against oxyimino-cephalosporins (e.g., cefotaxime and ceftazidime). Here, we tested the ability of avibactam (AVI), a novel non-β-lactam β-lactamase inhibitor to inactivate PER-2. Interestingly, the PER-2 inhibition constants (i.e., k2/K = 2 × 103 ± 0.1 × 103 M−1 s−1, where k2 is the rate constant for acylation (carbamylation) and K is the equilibrium constant) that were obtained when AVI was tested were reminiscent of values observed testing the inhibition by AVI of class C and D β-lactamases (i.e., k2/K range of ≈103 M−1 s−1) and not class A β-lactamases (i.e., k2/K range, 104 to 105 M−1 s−1). Once AVI was bound, a stable complex with PER-2 was observed via mass spectrometry (e.g., 31,389 ± 3 atomic mass units [amu] → 31,604 ± 3 amu for 24 h). Molecular modeling of PER-2 with AVI showed that the carbonyl of AVI was located in the oxyanion hole of the β-lactamase and that the sulfate of AVI formed interactions with the β-lactam carboxylate binding site of the PER-2 β-lactamase (R220 and T237). However, hydrophobic patches near the PER-2 active site (by Ser70 and B3-B4 β-strands) were observed and may affect the binding of necessary catalytic water molecules, thus slowing acylation (k2/K) of AVI onto PER-2. Similar electrostatics and hydrophobicity of the active site were also observed between OXA-48 and PER-2, while CTX-M-15 was more hydrophilic. To demonstrate the ability of AVI to overcome the enhanced cephalosporinase activity of PER-2 β-lactamase, we tested different β-lactam–AVI combinations. By lowering MICs to ≤2 mg/liter, the ceftaroline-AVI combination could represent a favorable therapeutic option against Enterobacteriaceae expressing blaPER-2. Our studies define the inactivation of the PER-2 ESBL by AVI and suggest that the biophysical properties of the active site contribute to determining the efficiency of inactivation. PMID:28348157

CpG methylation of a silent controlling element in the murine Avy allele is incomplete and unresponsive to methyl donor supplementation.

PubMed

Cropley, Jennifer E; Suter, Catherine M; Beckman, Kenneth B; Martin, David I K

2010-02-04

The viable yellow allele of agouti (A(vy)) is remarkable for its unstable and partially heritable epigenetic state, which produces wide variation in phenotypes of isogenic mice. In the A(vy) allele an inserted intracisternal A particle (IAP) acts as a controlling element which deregulates expression of agouti by transcription from the LTR of the IAP; the phenotypic state has been linked to CpG methylation of the LTR. Phenotypic variation between A(vy) mice indicates that the epigenetic state of the IAP is unstable in the germline. We have made a detailed examination of somatic methylation of the IAP using bisulphite allelic sequencing, and find that the promoter is incompletely methylated even when it is transcriptionally silent. In utero exposure to supplementary methyl donors, which alters the spectrum of A(vy) phenotypes, does not increase the density of CpG methylation in the silent LTR. Our findings suggest that, contrary to previous supposition, methyl donor supplementation acts through an indirect mechanism to silence A(vy). The incomplete cytosine methylation we observe at the somatically silent A(vy) allele may reflect its unstable germline state, and the influence of epigenetic modifications underlying CpG methylation.

CpG Methylation of a Silent Controlling Element in the Murine Avy Allele Is Incomplete and Unresponsive to Methyl Donor Supplementation

PubMed Central

Cropley, Jennifer E.; Suter, Catherine M.; Beckman, Kenneth B.; Martin, David I. K.

2010-01-01

Background The viable yellow allele of agouti (Avy) is remarkable for its unstable and partially heritable epigenetic state, which produces wide variation in phenotypes of isogenic mice. In the Avy allele an inserted intracisternal A particle (IAP) acts as a controlling element which deregulates expression of agouti by transcription from the LTR of the IAP; the phenotypic state has been linked to CpG methylation of the LTR. Phenotypic variation between Avy mice indicates that the epigenetic state of the IAP is unstable in the germline. Principal Findings We have made a detailed examination of somatic methylation of the IAP using bisulphite allelic sequencing, and find that the promoter is incompletely methylated even when it is transcriptionally silent. In utero exposure to supplementary methyl donors, which alters the spectrum of Avy phenotypes, does not increase the density of CpG methylation in the silent LTR. Conclusions Our findings suggest that, contrary to previous supposition, methyl donor supplementation acts through an indirect mechanism to silence Avy. The incomplete cytosine methylation we observe at the somatically silent Avy allele may reflect its unstable germline state, and the influence of epigenetic modifications underlying CpG methylation. PMID:20140227

The effect of auditory verbal imagery on signal detection in hallucination-prone individuals

PubMed Central

Moseley, Peter; Smailes, David; Ellison, Amanda; Fernyhough, Charles

2016-01-01

Cognitive models have suggested that auditory hallucinations occur when internal mental events, such as inner speech or auditory verbal imagery (AVI), are misattributed to an external source. This has been supported by numerous studies indicating that individuals who experience hallucinations tend to perform in a biased manner on tasks that require them to distinguish self-generated from non-self-generated perceptions. However, these tasks have typically been of limited relevance to inner speech models of hallucinations, because they have not manipulated the AVI that participants used during the task. Here, a new paradigm was employed to investigate the interaction between imagery and perception, in which a healthy, non-clinical sample of participants were instructed to use AVI whilst completing an auditory signal detection task. It was hypothesized that AVI-usage would cause participants to perform in a biased manner, therefore falsely detecting more voices in bursts of noise. In Experiment 1, when cued to generate AVI, highly hallucination-prone participants showed a lower response bias than when performing a standard signal detection task, being more willing to report the presence of a voice in the noise. Participants not prone to hallucinations performed no differently between the two conditions. In Experiment 2, participants were not specifically instructed to use AVI, but retrospectively reported how often they engaged in AVI during the task. Highly hallucination-prone participants who retrospectively reported using imagery showed a lower response bias than did participants with lower proneness who also reported using AVI. Results are discussed in relation to prominent inner speech models of hallucinations. PMID:26435050

Isolation of amylolytic, xylanolytic, and cellulolytic microorganisms extracted from the gut of the termite Reticulitermes santonensis by means of a micro-aerobic atmosphere.

PubMed

Tarayre, Cédric; Brognaux, Alison; Bauwens, Julien; Brasseur, Catherine; Mattéotti, Christel; Millet, Catherine; Destain, Jacqueline; Vandenbol, Micheline; Portetelle, Daniel; De Pauw, Edwin; Eric, Haubruge; Francis, Frédéric; Thonart, Philippe

2014-05-01

The aim of this work was to isolate enzyme-producing microorganisms from the tract of the termite Reticulitermes santonensis. The microorganisms were extracted from the guts and anaerobic (CO₂ or CO₂/H₂) and micro-aerobic atmospheres were used to stimulate growth. Three different strategies were tried out. First, the sample was spread on Petri dishes containing solid media with carboxymethylcellulose, microcrystalline cellulose or cellobiose. This technique allowed us to isolate two bacteria: Streptomyces sp. strain ABGxAviA1 and Pseudomonas sp. strain ABGxCellA. The second strategy consisted in inoculating a specific liquid medium containing carboxymethylcellulose, microcrystalline cellulose, or cellobiose. The samples were then spread on Petri dishes with the same specific medium containing carboxymethylcellulose, microcrystalline cellulose, or cellobiose. This led to the isolation of the mold Aspergillus sp. strain ABGxAviA2. Finally, the third strategy consisted in heating the first culture and spreading samples on agar plates containing rich medium. This led to the isolation of the bacterium Bacillus subtilis strain ABGx. All those steps were achieved in controlled atmospheres. The four enzyme-producing strains which were isolated were obtained by using a micro-aerobic atmosphere. Later, enzymatic assays were performed on the four strains. Streptomyces sp. strain ABGxAviA1 was found to produce only amylase, while Pseudomonas sp. strain ABGxCellA was found to produce β-glucosidase as well. Aspergillus sp. strain ABGxAviA2 showed β-glucosidase, amylase, cellulase, and xylanase activities. Finally, B. subtilis strain ABGx produced xylanase and amylase.

Local restoration of dystrophin expression with the morpholino oligomer AVI-4658 in Duchenne muscular dystrophy: a single-blind, placebo-controlled, dose-escalation, proof-of-concept study

PubMed Central

Kinali, Maria; Arechavala-Gomeza, Virginia; Feng, Lucy; Cirak, Sebahattin; Hunt, David; Adkin, Carl; Guglieri, Michela; Ashton, Emma; Abbs, Stephen; Nihoyannopoulos, Petros; Garralda, Maria Elena; Rutherford, Mary; Mcculley, Caroline; Popplewell, Linda; Graham, Ian R; Dickson, George; Wood, Matthew JA; Wells, Dominic J; Wilton, Steve D; Kole, Ryszard; Straub, Volker; Bushby, Kate; Sewry, Caroline; Morgan, Jennifer E; Muntoni, Francesco

2009-01-01

Summary Background Mutations that disrupt the open reading frame and prevent full translation of DMD, the gene that encodes dystrophin, underlie the fatal X-linked disease Duchenne muscular dystrophy. Oligonucleotides targeted to splicing elements (splice switching oligonucleotides) in DMD pre-mRNA can lead to exon skipping, restoration of the open reading frame, and the production of functional dystrophin in vitro and in vivo, which could benefit patients with this disorder. Methods We did a single-blind, placebo-controlled, dose-escalation study in patients with DMD recruited nationally, to assess the safety and biochemical efficacy of an intramuscular morpholino splice-switching oligonucleotide (AVI-4658) that skips exon 51 in dystrophin mRNA. Seven patients with Duchenne muscular dystrophy with deletions in the open reading frame of DMD that are responsive to exon 51 skipping were selected on the basis of the preservation of their extensor digitorum brevis (EDB) muscle seen on MRI and the response of cultured fibroblasts from a skin biopsy to AVI-4658. AVI-4658 was injected into the EDB muscle; the contralateral muscle received saline. Muscles were biopsied between 3 and 4 weeks after injection. The primary endpoint was the safety of AVI-4658 and the secondary endpoint was its biochemical efficacy. This trial is registered, number NCT00159250. Findings Two patients received 0·09 mg AVI-4658 in 900 μL (0·9%) saline and five patients received 0·9 mg AVI-4658 in 900 μL saline. No adverse events related to AVI-4658 administration were reported. Intramuscular injection of the higher-dose of AVI-4658 resulted in increased dystrophin expression in all treated EDB muscles, although the results of the immunostaining of EDB-treated muscle for dystrophin were not uniform. In the areas of the immunostained sections that were adjacent to the needle track through which AVI-4658 was given, 44–79% of myofibres had increased expression of dystrophin. In randomly chosen sections of treated EDB muscles, the mean intensity of dystrophin staining ranged from 22% to 32% of the mean intensity of dystrophin in healthy control muscles (mean 26·4%), and the mean intensity was 17% (range 11–21%) greater than the intensity in the contralateral saline-treated muscle (one-sample paired t test p=0·002). In the dystrophin-positive fibres, the intensity of dystrophin staining was up to 42% of that in healthy muscle. We showed expression of dystrophin at the expected molecular weight in the AVI-4658-treated muscle by immunoblot. Interpretation Intramuscular AVI-4658 was safe and induced the expression of dystrophin locally within treated muscles. This proof-of-concept study has led to an ongoing systemic clinical trial of AVI-4658 in patients with DMD. Funding UK Department of Health. PMID:19713152

75 FR 23206 - Safety Zone; AVI September Fireworks Display, Laughlin, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-03

...-AA00 Safety Zone; AVI September Fireworks Display, Laughlin, NV AGENCY: Coast Guard, DHS. ACTION... the lower Colorado River, Laughlin, NV, in support of a fireworks display near the AVI Resort and... navigable waters of the Lower Colorado River in support of a fireworks show in the navigation channel of the...

75 FR 29427 - Safety Zone; AVI May Fireworks Display, Laughlin, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-26

...-AA00 Safety Zone; AVI May Fireworks Display, Laughlin, NV AGENCY: Coast Guard, DHS. ACTION: Temporary... Colorado River, Laughlin, NV, in support of a fireworks display near the AVI Resort and Casino. This safety... Fireworks Display; Laughlin, Nevada, NV in the Federal Register (75 FR 9370). We received 0 comments on the...

Response to "Methyl donors change the germline epigenetic state of the A(vy) allele"

USDA-ARS?s Scientific Manuscript database

We appreciate the explanation offered by Cropley et al. for what they perceive is a discrepancy between their results showing an effect of methyl supplementation on the germline epigenetic state of Avy and ours showing that diet-induced hypermethylation at Avy is not inherited transgenerationally. D...

Can Ceftazidime-Avibactam and Aztreonam Overcome β-Lactam Resistance Conferred by Metallo-β-Lactamases in Enterobacteriaceae?

PubMed

Marshall, Steven; Hujer, Andrea M; Rojas, Laura J; Papp-Wallace, Krisztina M; Humphries, Romney M; Spellberg, Brad; Hujer, Kristine M; Marshall, Emma K; Rudin, Susan D; Perez, Federico; Wilson, Brigid M; Wasserman, Ronald B; Chikowski, Linda; Paterson, David L; Vila, Alejandro J; van Duin, David; Kreiswirth, Barry N; Chambers, Henry F; Fowler, Vance G; Jacobs, Michael R; Pulse, Mark E; Weiss, William J; Bonomo, Robert A

2017-04-01

Based upon knowledge of the hydrolytic profile of major β-lactamases found in Gram-negative bacteria, we tested the efficacy of the combination of ceftazidime-avibactam (CAZ-AVI) with aztreonam (ATM) against carbapenem-resistant enteric bacteria possessing metallo-β-lactamases (MBLs). Disk diffusion and agar-based antimicrobial susceptibility testing were initially performed to determine the in vitro efficacy of a unique combination of CAZ-AVI and ATM against 21 representative Enterobacteriaceae isolates with a complex molecular background that included bla IMP , bla NDM , bla OXA-48 , bla CTX-M , bla AmpC , and combinations thereof. Time-kill assays were conducted, and the in vivo efficacy of this combination was assessed in a murine neutropenic thigh infection model. By disk diffusion assay, all 21 isolates were resistant to CAZ-AVI alone, and 19/21 were resistant to ATM. The in vitro activity of CAZ-AVI in combination with ATM against diverse Enterobacteriaceae possessing MBLs was demonstrated in 17/21 isolates, where the zone of inhibition was ≥21 mm. All isolates demonstrated a reduction in CAZ-AVI agar dilution MICs with the addition of ATM. At 2 h, time-kill assays demonstrated a ≥4-log 10 -CFU decrease for all groups that had CAZ-AVI with ATM (8 μg/ml) added, compared to the group treated with CAZ-AVI alone. In the murine neutropenic thigh infection model, an almost 4-log 10 -CFU reduction was noted at 24 h for CAZ-AVI (32 mg/kg every 8 h [q8h]) plus ATM (32 mg/kg q8h) versus CAZ-AVI (32 mg/kg q8h) alone. The data presented herein require us to carefully consider this new therapeutic combination to treat infections caused by MBL-producing Enterobacteriaceae . Copyright © 2017 American Society for Microbiology.

75 FR 9370 - Safety Zone; AVI May Fireworks Display, Colorado River, Laughlin, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-02

...-AA00 Safety Zone; AVI May Fireworks Display, Colorado River, Laughlin, NV AGENCY: Coast Guard, DHS... waters of the lower Colorado River, Laughlin, NV, in support of a fireworks display near the AVI Resort... navigable waters of the Lower Colorado River in support of a fireworks show near Laughlin, NV. The fireworks...

A glycosylated recombinant human granulocyte colony stimulating factor produced in a novel protein production system (AVI-014) in healthy subjects: a first-in human, single dose, controlled study

PubMed Central

Varki, Roslyn; Pequignot, Ed; Leavitt, Mark C; Ferber, Andres; Kraft, Walter K

2009-01-01

Background AVI-014 is an egg white-derived, recombinant, human granulocyte colony-stimulating factor (G-CSF). This healthy volunteer study is the first human investigation of AVI-014. Methods 24 male and female subjects received a single subcutaneous injection of AVI-014 at 4 or 8 mcg/kg. 16 control subjects received 4 or 8 mcg/kg of filgrastim (Neupogen, Amgen) in a partially blinded, parallel fashion. Results The Geometric Mean Ratio (GMR) (90% CI) of 4 mcg/kg AVI-014/filgrastim AUC(0–72 hr) was 1.00 (0.76, 1.31) and Cmax was 0.86 (0.66, 1.13). At the 8 mcg/kg dose, the AUC(0–72) GMR was 0.89 (0.69, 1.14) and Cmax was 0.76 (0.58, 0.98). A priori pharmacokinetic bioequivalence was defined as the 90% CI of the GMR bounded by 0.8–1.25. Both the white blood cell and absolute neutrophil count area under the % increase curve AUC(0–9 days) and Cmax (maximal % increase from baseline)GMR at 4 and 8 mcg/kg fell within the 0.5–2.0 a priori bound set for pharmacodynamic bioequivalence. The CD 34+ % increase curve AUC(0–9 days) and Cmax GMR for both doses was ~1, but 90% confidence intervals were large due to inherent variance, and this measure did not meet pharmacodynamic bioequivalence. AVI-014 demonstrated a side effect profile similar to that of filgrastim. Conclusion AVI-014 has safety, pharmacokinetic, and pharmacodynamic properties comparable to filgrastim at an equal dose in healthy volunteers. These findings support further investigation in AVI-014. PMID:19175929

The avilamycin resistance determinants AviRa and AviRb methylate 23S rRNA at the guanosine 2535 base and the uridine 2479 ribose.

PubMed

Treede, Irina; Jakobsen, Lene; Kirpekar, Finn; Vester, Birte; Weitnauer, Gabriele; Bechthold, Andreas; Douthwaite, Stephen

2003-07-01

Avilamycin is an orthosomycin antibiotic that has shown considerable potential for clinical use, although it is presently used as a growth promoter in animal feed. Avilamycin inhibits bacterial protein synthesis by binding to the 50S ribosomal subunit. The ribosomes of the producer strain, Streptomyces viridochromogenes Tü57, are protected from the drug by the action of three resistance factors located in the avilamycin biosynthetic gene cluster. Two of the resistance factors, aviRa and aviRb, encode rRNA methyltransferases that specifically target 23S rRNA. Recombinant AviRa and AviRb proteins retain their activity after purification, and both specifically methylate in vitro transcripts of 23S rRNA domain V. Reverse transcriptase primer extension indicated that AviRa is an N-methyltransferase that targets G2535 within helix 91 of the rRNA, whereas AviRb modified the 2'-O-ribose position of nucleotide U2479 within helix 89. MALDI mass spectrometry confirmed the exact positions of each of these modifications, and additionally established that a single methyl group is added at each nucleotide. Neither of these two nucleotides have previously been described as a target for enzymatic methylation. Molecular models of the 50S subunit crystal structure show that the N-1 of the G2535 base and the 2'-hydroxyl of U2479 are separated by approximately 10 A, a distance that can be spanned by avilamycin. In addition to defining new resistance mechanisms, these data refine our understanding of the probable ribosome contacts made by orthosomycins and of how these antibiotics inhibit protein synthesis.

TrAVis to Enhance Online Tutoring and Learning Activities: Real-Time Visualization of Students Tracking Data

ERIC Educational Resources Information Center

May, Madeth; George, Sebastien; Prevot, Patrick

2011-01-01

Purpose: This paper presents a part of our research work that places an emphasis on Tracking Data Analysis and Visualization (TrAVis) tools, a web-based system, designed to enhance online tutoring and learning activities, supported by computer-mediated communication (CMC) tools. TrAVis is particularly dedicated to assist both tutors and students…

Germ-line epigenetic modification of the murine Avy allele by nutritional supplementation

PubMed Central

Cropley, Jennifer E.; Suter, Catherine M.; Beckman, Kenneth B.; Martin, David I. K.

2006-01-01

Environmental effects on phenotype can be mediated by epigenetic modifications. The epigenetic state of the murine Avy allele is highly variable, and determines phenotypic effects that vary in a mosaic spectrum that can be shifted by in utero exposure to methyl donor supplementation. We have asked if methyl donor supplementation affects the germ-line epigenetic state of the Avy allele. We find that the somatic epigenetic state of Avy is affected by in utero methyl donor supplementation only when the allele is paternally contributed. Exposure to methyl donor supplementation during midgestation shifts Avy phenotypes not only in the mice exposed as fetuses, but in their offspring. This finding indicates that methyl donors can change the epigenetic state of the Avy allele in the germ line, and that the altered state is retained through the epigenetic resetting that takes place in gametogenesis and embryogenesis. Thus a mother's diet may have an enduring influence on succeeding generations, independent of later changes in diet. Although other reports have suggested such heritable epigenetic changes, this study demonstrates that a specific mammalian gene can be subjected to germ-line epigenetic change. PMID:17101998

Evaluation of a native vegetation masking technique

NASA Technical Reports Server (NTRS)

Kinsler, M. C.

1984-01-01

A crop masking technique based on Ashburn's vegetative index (AVI) was used to evaluate native vegetation as an indicator of crop moisture condition. A mask of the range areas (native vegetation) was generated for each of thirteen Great Plains LANDSAT MSS sample segments. These masks were compared to the digitized ground truth and accuracies were computed. An analysis of the types of errors indicates a consistency in errors among the segments. The mask represents a simple quick-look technique for evaluating vegetative cover.

The SOURCE Registry: what is the learning curve in trans-apical aortic valve implantation?

PubMed

Wendler, Olaf; Walther, Thomas; Schroefel, Holger; Lange, Rüdiger; Treede, Hendrik; Fusari, Melissa; Rubino, Paolo; Thomas, Martyn

2011-06-01

Trans-apical aortic valve implantation (TA-AVI) has been shown to be a reproducible technique. Early results from the SAPIEN Aortic Bioprosthesis European Outcome (SOURCE) Registry identified major access complications associated with high 30-day mortality. Using the SOURCE Registry, we analyze the learning curve for TA-AVI over the first 2 years after commercialization. The SOURCE Registry gathered data for 2 consecutive years at European centers following commercialization of the Edwards SAPIEN bioprosthesis, totaling 2339 patients (1038 in COHORT 1 and 1301 in COHORT 2). Only data from centers that provided all of their consecutively treated patients were included in this study. We compared the 30-day results of TA-AVI from COHORT 1 (C-1: January/2008-January/2009) with the 30-day results of COHORT 2 (C-2: February/2009-January/2010). This analysis is based on a total number of 575 TA-AVIs in C-1 and 819 TA-AVIs in C-2. Mean age (C-1: 80.7 years, C-2: 80.5 years) and logistic European System for Cardiac Operative Risk Evaluation (EuroSCORE) (C-1: 29.1%, C-2 27.3%) were not significantly different. Valve malposition (C-1: 1.6%, C-2: 1.2%), valve migration/embolization (C-1: 0.5%, C-2: 1.0%), and major access complications (C-1: 2.1%, C-2: 1.8%) were in total less frequent, but not statistically significant lower in C-2. However, the reduction of aortic regurgitation >2+ immediately following the procedure (C-1: 4.52%, C-2: 2.1%, p=0.011) and conversion rate to open surgery (C-1: 3.7%, C-2: 1.5%, p=0.0315) reached statistical significance. Postoperative complications included dialysis (C-1: 7.0%, C-2: 5.7%, p=ns), pacemaker implantation (C-2: 7.7%, C-2: 6.7%, p=ns), stroke (C-1: 2.4%, C-2: 2.6%, p=ns), and myocardial infarct (C-1: 0.7%, C-2: 0.4%, p=ns). The total 30-day mortality was 10.8% and not significantly different between the two groups (C-1: 10.8%, C-2: 10.7%, p=ns). Although the incidence of technical intra procedural complications has trended downward, reflecting the learning curve for TA-AVI, 30-day mortality was unchanged, likely due to patient co-morbidities not captured by preoperative risk variables. Copyright © 2010 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

Crystal structure of the avilamycin resistance-conferring methyltransferase AviRa from Streptomyces viridochromogenes.

PubMed

Mosbacher, Tanja G; Bechthold, Andreas; Schulz, Georg E

2003-05-23

The emergence of antibiotic-resistant bacterial strains is a widespread problem in contemporary medical practice and drug design. It is therefore important to elucidate the underlying mechanism in each case. The methyltransferase AviRa from Streptomyces viridochromogenes mediates resistance to the antibiotic avilamycin, which is closely related to evernimicin, an oligosaccharide antibiotic that has been used in medical studies. The structure of AviRa was determined by X-ray diffraction at 1.5A resolution. Phases were obtained from one selenomethionine residue introduced by site-directed mutagenesis. The chain-fold is similar to that of most methyltransferases, although AviRa contains two additional helices as a specific feature. A putative-binding site for the cofactor S-adenosyl-L-methionine was derived from homologous structures. It agrees with the conserved pattern of interacting amino acid residues. AviRa methylates a specific guanine base within the peptidyltransferase loop of the 23S ribosomal RNA. Guided by the target, the enzyme was docked to the cognate ribosomal surface, where it fit well into a deep cleft without contacting any ribosomal protein. The two additional alpha-helices of AviRa filled a depression in the surface. Since the transferred methyl group of the cofactor is in a pocket beneath the enzyme surface, the targeted guanine base has to flip out for methylation.

Gene-Specific Countermeasures Against Ebola Virus Based on Antisense Phosphorodiamidate Morpholino Oligomers

DTIC Science & Technology

2006-01-01

Bavari 1* 1 US Army Medical Research Institute of Infectious Diseases, Fort Detrick, Frederick, Maryland, United States of America, 2 AVI BioPharma ...used as controls in these experiments. The PMOs were synthesized by AVI BioPharma , (Corvallis, Oregon, United States), as previously described [35]. In...interests. RB, DAS, and PLI have financial interest in AVI BioPharma , the company that supplied the PMO compounds for these studies. & References 1

The Airborne Visible / Infrared Imaging Spectrometer AVIS: Design, Characterization and Calibration.

PubMed

Oppelt, Natascha; Mauser, Wolfram

2007-09-14

The Airborne Visible / Infrared imaging Spectrometer AVIS is a hyperspectralimager designed for environmental monitoring purposes. The sensor, which wasconstructed entirely from commercially available components, has been successfullydeployed during several experiments between 1999 and 2007. We describe the instrumentdesign and present the results of laboratory characterization and calibration of the system'ssecond generation, AVIS-2, which is currently being operated. The processing of the datais described and examples of remote sensing reflectance data are presented.

VP35 Knockdown Inhibits Ebola Virus Amplification and Protects Against Lethal Infection in Mice

DTIC Science & Technology

2006-03-01

Army Medical Research Institute of Infectious Diseases, Frederick, Maryland 21702-50112; and AVI BioPharma Inc., Corvallis, Oregon3 Received 29 June...target nucleotides within the EBOV genome or antigenome (Table 1). All PMO were synthesized and purified by AVI BioPharma Inc. (Cor- vallis, OR), as...technical assistance. We are also grateful to the Chemistry Department at AVI BioPharma Inc. for expert synthesis, purification, and analysis of all PMO

Anthocyanin Vacuolar Inclusions Form by a Microautophagy Mechanism

PubMed Central

Chanoca, Alexandra; Ueda, Takashi; Grotewold, Erich

2015-01-01

Anthocyanins are flavonoid pigments synthesized in the cytoplasm and stored inside vacuoles. Many plant species accumulate densely packed, 3- to 10-μm diameter anthocyanin deposits called anthocyanin vacuolar inclusions (AVIs). Despite their conspicuousness and importance in organ coloration, the origin and nature of AVIs have remained controversial for decades. We analyzed AVI formation in cotyledons of different Arabidopsis thaliana genotypes grown under anthocyanin inductive conditions and in purple petals of lisianthus (Eustoma grandiorum). We found that cytoplasmic anthocyanin aggregates in close contact with the vacuolar surface are directly engulfed by the vacuolar membrane in a process reminiscent of microautophagy. The engulfed anthocyanin aggregates are surrounded by a single membrane derived from the tonoplast and eventually become free in the vacuolar lumen like an autophagic body. Neither endosomal/prevacuolar trafficking nor the autophagy ATG5 protein is involved in the formation of AVIs. In Arabidopsis, formation of AVIs is promoted by both an increase in cyanidin 3-O-glucoside derivatives and by depletion of the glutathione S-transferase TT19. We hypothesize that this novel microautophagy mechanism also mediates the transport of other flavonoid aggregates into the vacuole. PMID:26342015

Human Signatures for Personnel Detection

DTIC Science & Technology

2010-09-14

work\\ TESIS \\prueba.avi’); switch videoinfo.ImageType case ’truecolor’ video=aviread(’C:\\MATLAB\\R2006a\\work\\ TESIS \\prueba.avi’); case...8217indexed’ video=aviread(’C:\\MATLAB\\R2006a\\work\\ TESIS \\prueba.avi’); video=ind2rgb(video); end 4.1.2 Color to Grayscale Converter The conversion from...algorithm. • Maximum errors for both GTSig and the lattice Boltzmann method were confined to the corners where fthe temperature is ill de ined Numerical

Spectral CT Image Restoration via an Average Image-Induced Nonlocal Means Filter.

PubMed

Zeng, Dong; Huang, Jing; Zhang, Hua; Bian, Zhaoying; Niu, Shanzhou; Zhang, Zhang; Feng, Qianjin; Chen, Wufan; Ma, Jianhua

2016-05-01

Spectral computed tomography (SCT) images reconstructed by an analytical approach often suffer from a poor signal-to-noise ratio and strong streak artifacts when sufficient photon counts are not available in SCT imaging. In reducing noise-induced artifacts in SCT images, in this study, we propose an average image-induced nonlocal means (aviNLM) filter for each energy-specific image restoration.  Methods:  The present aviNLM algorithm exploits redundant information in the whole energy domain. Specifically, the proposed aviNLM algorithm yields the restored results by performing a nonlocal weighted average operation on the noisy energy-specific images with the nonlocal weight matrix between the target and prior images, in which the prior image is generated from all of the images reconstructed in each energy bin.  Results: Qualitative and quantitative studies are conducted to evaluate the aviNLM filter by using the data of digital phantom, physical phantom, and clinical patient data acquired from the energy-resolved and -integrated detectors, respectively. Experimental results show that the present aviNLM filter can achieve promising results for SCT image restoration in terms of noise-induced artifact suppression, cross profile, and contrast-to-noise ratio and material decomposition assessment. Conclusion and Significance: The present aviNLM algorithm has useful potential for radiation dose reduction by lowering the mAs in SCT imaging, and it may be useful for some other clinical applications, such as in myocardial perfusion imaging and radiotherapy.

Menuing and Scrolling as Alternative Information Management Techniques

DTIC Science & Technology

1988-02-01

Reef Inhabitant Angelfish Parrotfish[ Cardinalfish Scorpionfish INSECT Carnivorous r Cicada Killer Lacewing LFlea Mosquito Herbivorous r Chinch Bug...Ayt -Ave 20 0 Bow f in 20 4 Bunt ing 20 1 1 0 Carrion Beetle 20 7 5 2 C avy 20 0 0 Chamoi s 20 i 1 0 Chinch Bug 20 4 2 Cicada Kilter 20 4 3 1 Earwig

Arterial Stiffness Measured with the Cuff Oscillometric Method Is Predictive of Exercise Capacity in Patients with Cardiac Diseases.

PubMed

Tazawa, Yasushi; Mori, Nobuyoshi; Ogawa, Yoshiko; Ito, Osamu; Kohzuki, Masahiro

2016-06-01

Arterial stiffness is widely used in assessing arteriosclerosis in the background of increased cardiovascular events. Arteriosclerosis also causes reduction in exercise capacity, which is a most important prognostic factor in patients with cardiovascular disease; however, data on the association between arterial stiffness and exercise capacity are limited. Therefore, a simple and noninvasive measurement of arterial stiffness that reflects the central circulation and exercise capacity is needed. The arterial velocity pulse index (AVI) is a parameter of arterial stiffness measurable with the cuff oscillometric method; however, the clinical utility of this method is unclear. We aimed to evaluate the trend of AVI in patients with coronary artery disease (CAD), and the association between AVI and exercise capacity. A cross-sectional study of 116 patients with cardiac disease (34 CAD and 82 non-CAD patients) was performed. Non-CAD patients were those with any cardiac diseases who did not have proven CAD. The results showed that the AVI was significantly higher in CAD patients than non-CAD patients (P < 0.05, analysis of covariance). The AVI was inversely correlated with peakVO2 (r = -0.239, P < 0.05) and was a significant explanatory variable for peakVO2 in stepwise regression analysis (β = -14.62, t = -2.5, P < 0.05). These results indicate that the AVI is strongly associated with CAD and predictive of the exercise capacity in patients with cardiac diseases. We, therefore, propose that the cuff oscillometric method is clinically useful in evaluating arterial stiffness in patients with cardiac diseases, especially CAD.

Early-life lead exposure results in dose- and sex-specific effects on weight and epigenetic gene regulation in weanling mice

PubMed Central

Faulk, Christopher; Barks, Amanda; Liu, Kevin; Goodrich, Jaclyn M; Dolinoy, Dana C

2013-01-01

Aims Epidemiological and animal data suggest that the development of adult chronic conditions is influenced by early-life exposure-induced changes to the epigenome. This study investigates the effects of perinatal lead (Pb) exposure on DNA methylation and bodyweight in weanling mice. Materials & methods Viable yellow agouti (Avy) mouse dams were exposed to 0, 2.1, 16 and 32 ppm Pb acetate before conception through weaning. Epigenetic effects were evaluated by scoring coat color of Avy/a offspring and quantitative bisulfite sequencing of two retrotransposon-driven (Avy and CDK5 activator-binding protein intracisternal A particle element) and two imprinted (Igf2 and Igf2r) loci in tail DNA. Results Maternal blood Pb levels were below the limit of detection in controls, and 4.1, 25.1 and 32.1 μg/dl for each dose, respectively. Pb exposure was associated with a trend of increased wean bodyweight in males (p = 0.03) and altered coat color in Avy/a offspring. DNA methylation at Avy and the CDK5 activator-binding protein intracisternal A-particle element was significantly different from controls following a cubic trend (p = 0.04; p = 0.01), with male-specific effects at the Avy locus. Imprinted genes did not shift in methylation across exposures. Conclusion Dose- and sex-specific responses in bodyweight and DNA methylation indicate that Pb acts on the epigenome in a locus-specific fashion, dependent on the genomic feature hosting the CpG site of interest, and that sex is a factor in epigenetic response. PMID:24059796

Exon skipping and dystrophin restoration in patients with Duchenne muscular dystrophy after systemic phosphorodiamidate morpholino oligomer treatment: an open-label, phase 2, dose-escalation study

PubMed Central

Cirak, Sebahattin; Arechavala-Gomeza, Virginia; Guglieri, Michela; Feng, Lucy; Torelli, Silvia; Anthony, Karen; Abbs, Stephen; Garralda, Maria Elena; Bourke, John; Wells, Dominic J; Dickson, George; Wood, Matthew JA; Wilton, Steve D; Straub, Volker; Kole, Ryszard; Shrewsbury, Stephen B; Sewry, Caroline; Morgan, Jennifer E; Bushby, Kate; Muntoni, Francesco

2011-01-01

Summary Background We report clinical safety and biochemical efficacy from a dose-ranging study of intravenously administered AVI-4658 phosphorodiamidate morpholino oligomer (PMO) in patients with Duchenne muscular dystrophy. Method We undertook an open-label, phase 2, dose-escalation study (0·5, 1·0, 2·0, 4·0, 10·0, and 20·0 mg/kg bodyweight) in ambulant patients with Duchenne muscular dystrophy aged 5–15 years with amenable deletions in DMD. Participants had a muscle biopsy before starting treatment and after 12 weekly intravenous infusions of AVI-4658. The primary study objective was to assess safety and tolerability of AVI-4658. The secondary objectives were pharmacokinetic properties and the ability of AVI-4658 to induce exon 51 skipping and dystrophin restoration by RT-PCR, immunohistochemistry, and immunoblotting. The study is registered, number NCT00844597. Findings 19 patients took part in the study. AVI-4658 was well tolerated with no drug-related serious adverse events. AVI-4658 induced exon 51 skipping in all cohorts and new dystrophin protein expression in a significant dose-dependent (p=0·0203), but variable, manner in boys from cohort 3 (dose 2 mg/kg) onwards. Seven patients responded to treatment, in whom mean dystrophin fluorescence intensity increased from 8·9% (95% CI 7·1–10·6) to 16·4% (10·8–22·0) of normal control after treatment (p=0·0287). The three patients with the greatest responses to treatment had 21%, 15%, and 55% dystrophin-positive fibres after treatment and these findings were confirmed with western blot, which showed an increase after treatment of protein levels from 2% to 18%, from 0·9% to 17%, and from 0% to 7·7% of normal muscle, respectively. The dystrophin-associated proteins α-sarcoglycan and neuronal nitric oxide synthase were also restored at the sarcolemma. Analysis of the inflammatory infiltrate indicated a reduction of cytotoxic T cells in the post-treatment muscle biopsies in the two high-dose cohorts. Interpretation The safety and biochemical efficacy that we present show the potential of AVI-4658 to become a disease-modifying drug for Duchenne muscular dystrophy. Funding UK Medical Research Council; AVI BioPharma. PMID:21784508

Possibility of relationship between the yellow sand and the foot-and-mouth disease in Miyazaki Prefecture, Japan in March 2010 by using MODIS images

NASA Astrophysics Data System (ADS)

Kato, Yoshinobu

2014-11-01

In Miyazaki Prefecture, Japan, the O-type foot-and-mouth disease (FMD) appeared and spread from March to July, 2010. The first infected livestock by FMD virus was detected on March 26, 2010 at Tsuno Town in Miyazaki Prefecture. The O-type FMD was found on March 14 at the suburb of Lanzhou City in Gansu, and on March 25, 2010 in Shanxi, China. The duration of FMD virus incubation is 2 to 8 days. Maki et al. (2011, 2012) presumed the cause of the first FMD in Miyazaki as follows: The yellow sand adhered with FMD virus was transported from Gansu to Miyazaki by global westerly winds. In this paper, we investigate whether the yellow sand generated in Gansu flew to Miyazaki in March, 2010 by using MODIS data of Terra and Aqua satellites. True-color mosaic images, AVI mosaic images and T11 mosaic images from China to Japan are made and examined. The aerosol vapor index (AVI) is defined as AVI=T12-T11, where T12 and T11 are the brightness temperatures at 12μm and 11μm wavelength, respectively. The AVI can detect the dust and sandstorms (DSS, i.e., yellow sands) in satellite images both at daytime and night. AVI values are classified into six levels from 0 to 5. From AVI images, DSS existed in the vicinity of Lanzhou on March 19, and in the south area of Shanxi on March 20, and in the vicinity of Tsuno Town on March 21. If Maki et al. are right, the cause of the first FMD in Miyazaki in March 2010 is that DSS generated in Gansu on March 19 flew to Miyazaki on March 21.

Prevalence of E/A wave fusion and A wave truncation in DDD pacemaker patients with complete AV block under nominal AV intervals.

PubMed

Poller, Wolfram C; Dreger, Henryk; Schwerg, Marius; Melzer, Christoph

2015-01-01

Optimization of the AV-interval (AVI) in DDD pacemakers improves cardiac hemodynamics and reduces pacemaker syndromes. Manual optimization is typically not performed in clinical routine. In the present study we analyze the prevalence of E/A wave fusion and A wave truncation under resting conditions in 160 patients with complete AV block (AVB) under the pre-programmed AVI. We manually optimized sub-optimal AVI. We analyzed 160 pacemaker patients with complete AVB, both in sinus rhythm (AV-sense; n = 129) and under atrial pacing (AV-pace; n = 31). Using Doppler analyses of the transmitral inflow we classified the nominal AVI as: a) normal, b) too long (E/A wave fusion) or c) too short (A wave truncation). In patients with a sub-optimal AVI, we performed manual optimization according to the recommendations of the American Society of Echocardiography. All AVB patients with atrial pacing exhibited a normal transmitral inflow under the nominal AV-pace intervals (100%). In contrast, 25 AVB patients in sinus rhythm showed E/A wave fusion under the pre-programmed AV-sense intervals (19.4%; 95% confidence interval (CI): 12.6-26.2%). A wave truncations were not observed in any patient. All patients with a complete E/A wave fusion achieved a normal transmitral inflow after AV-sense interval reduction (mean optimized AVI: 79.4 ± 13.6 ms). Given the rate of 19.4% (CI 12.6-26.2%) of patients with a too long nominal AV-sense interval, automatic algorithms may prove useful in improving cardiac hemodynamics, especially in the subgroup of atrially triggered pacemaker patients with AV node diseases.

Sensitivity and specificity of the Akena Visual Depression Inventory (AViDI-18) in Kampala (Uganda) and Cape Town (South Africa).

PubMed

Akena, Dickens; Joska, John; Stein, Dan J

2018-05-01

Visual scales may be particularly useful in screening for depression in patients with low literacy. However, few have been validated and none are in common use.AimModification and validation of a visual scale to screen for depression in low literacy settings. We assessed the validity, reliability and factor loading of a 28-item visual depression inventory using pictorial items depicting depression signs and symptoms. We validated a revised scale comprised of 18 items known as the Akena Visual Depression Inventory (AViDI-18) against a structured diagnostic interview (Mini-International Neuropsychiatric Inventory) in 343 patients in Kampala (Uganda) and Cape Town (South Africa). The 18 pictorial items had acceptable validity and reliability. The area under the curve (AUC) score of the AViDI-18 was 0.9. AUC scores were not significantly associated with sociodemographic variables. The AViDI-18 is a valid screen for depression in patients with low literacy.Declaration of interestNone.

Asynchronous variational integration using continuous assumed gradient elements.

PubMed

Wolff, Sebastian; Bucher, Christian

2013-03-01

Asynchronous variational integration (AVI) is a tool which improves the numerical efficiency of explicit time stepping schemes when applied to finite element meshes with local spatial refinement. This is achieved by associating an individual time step length to each spatial domain. Furthermore, long-term stability is ensured by its variational structure. This article presents AVI in the context of finite elements based on a weakened weak form (W2) Liu (2009) [1], exemplified by continuous assumed gradient elements Wolff and Bucher (2011) [2]. The article presents the main ideas of the modified AVI, gives implementation notes and a recipe for estimating the critical time step.

Biomass District Heat System for Interior Rural Alaska Villages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wall, William A.; Parker, Charles R.

2014-09-01

Alaska Village Initiatives (AVI) from the outset of the project had a goal of developing an integrated village approach to biomass in Rural Alaskan villages. A successful biomass project had to be ecologically, socially/culturally and economically viable and sustainable. Although many agencies were supportive of biomass programs in villages none had the capacity to deal effectively with developing all of the tools necessary to build a complete integrated program. AVI had a sharp learning curve as well. By the end of the project with all the completed tasks, AVI developed the tools and understanding to connect all of the dotsmore » of an integrated village based program. These included initially developing a feasibility model that created the capacity to optimize a biomass system in a village. AVI intent was to develop all aspects or components of a fully integrated biomass program for a village. This meant understand the forest resource and developing a sustainable harvest system that included the “right sized” harvest equipment for the scale of the project. Developing a training program for harvesting and managing the forest for regeneration. Making sure the type, quality, and delivery system matched the needs of the type of boiler or boilers to be installed. AVI intended for each biomass program to be of the scale that would create jobs and a sustainable business.« less

47 CFR 15.251 - Operation within the bands 2.9-3.26 GHz, 3.267-3.332 GHz, 3.339-3.3458 GHz, and 3.358-3.6 GHz.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., and 3.358-3.6 GHz. (a) Operation under the provisions of this section is limited to automatic vehicle identification systems (AVIS) which use swept frequency techniques for the purpose of automatically identifying transportation vehicles. (b) The field strength anywhere within the frequency range swept by the signal shall not...

47 CFR 15.251 - Operation within the bands 2.9-3.26 GHz, 3.267-3.332 GHz, 3.339-3.3458 GHz, and 3.358-3.6 GHz.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., and 3.358-3.6 GHz. (a) Operation under the provisions of this section is limited to automatic vehicle identification systems (AVIS) which use swept frequency techniques for the purpose of automatically identifying transportation vehicles. (b) The field strength anywhere within the frequency range swept by the signal shall not...

47 CFR 15.251 - Operation within the bands 2.9-3.26 GHz, 3.267-3.332 GHz, 3.339-3.3458 GHz, and 3.358-3.6 GHz.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., and 3.358-3.6 GHz. (a) Operation under the provisions of this section is limited to automatic vehicle identification systems (AVIS) which use swept frequency techniques for the purpose of automatically identifying transportation vehicles. (b) The field strength anywhere within the frequency range swept by the signal shall not...

47 CFR 15.251 - Operation within the bands 2.9-3.26 GHz, 3.267-3.332 GHz, 3.339-3.3458 GHz, and 3.358-3.6 GHz.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., and 3.358-3.6 GHz. (a) Operation under the provisions of this section is limited to automatic vehicle identification systems (AVIS) which use swept frequency techniques for the purpose of automatically identifying transportation vehicles. (b) The field strength anywhere within the frequency range swept by the signal shall not...

Application Guidelines for Quality Assurance Procedures for Hybrid Microcircuits.

DTIC Science & Technology

1983-03-01

INSPECTION LIMITS SYMBOL TEST CONDITIONS UNITS SUBGROUP 6 TC = -55 DEGREES C AVI0 1 SAME AS SUBGROUP 5 -0.1 5 Vpp VOS SAME AS SUBGROUP 4 50 m%LC V0 2 ... 1 . Line Certification 2 . Fabrication Techniques and Material Qualification Procedures 3. Design Guidelines e. Application Guidelines. Items a through... 1 2 . GENERAL ................... ......... ................. 3 2.1 Summary of documents generated ........................ 3 2.2 Contract objectives

Thermal tolerant avicelase from Acidothermus cellulolyticus

DOEpatents

Ding, Shi-You [Golden, CO; Adney, William S [Golden, CO; Vinzant, Todd B [Golden, CO; Himmel, Michael E [Littleton, CO

2008-04-29

The invention provides a thermal tolerant (thermostable) cellulase, AviIII, that is a member of the glycoside hydrolase (GH) family. AviIII was isolated and characterized from Acidothermus cellulolyticus and, like many cellulases, the disclosed polypeptide and/or its derivatives may be useful for the conversion of biomass into biofuels and chemicals.

Thermal tolerant avicelase from Acidothermus cellulolyticus

DOEpatents

Ding, Shi-You [Golden, CO; Adney, William S [Golden, CO; Vinzant, Todd B [Golden, CO; Himmel, Michael E [Littleton, CO

2009-05-26

The invention provides a thermal tolerant (thermostable) cellulase, AviIII, that is a member of the glycoside hydrolase (GH) family. AviIII was isolated and characterized from Acidothermus cellulolyticus and, like many cellulases, the disclosed polypeptide and/or its derivatives may be useful for the conversion of biomass into biofuels and chemicals.

BD LSRFortessa for Tulane DoD ID and Cancer Projects

DTIC Science & Technology

2015-01-21

Influenza Antivirals" PI: Patrick Iversen, AVI BioPharma DTRA-TMTI (Subcontract) "Rapid Development of Dengue Antivirals" PI: Patrick Iversen, AVI... BioPharma (PI) Lisa Morici, PhD: Defense Threat Reduction Agency HDTRA 1-13-C-0002 "Outer membrane vesicle vaccine-mediated protection against

Fundamental study of compression for movie files of coronary angiography

NASA Astrophysics Data System (ADS)

Ando, Takekazu; Tsuchiya, Yuichiro; Kodera, Yoshie

2005-04-01

When network distribution of movie files was considered as reference, it could be useful that the lossy compression movie files which has small file size. We chouse three kinds of coronary stricture movies with different moving speed as an examination object; heart rate of slow, normal and fast movies. The movies of MPEG-1, DivX5.11, WMV9 (Windows Media Video 9), and WMV9-VCM (Windows Media Video 9-Video Compression Manager) were made from three kinds of AVI format movies with different moving speeds. Five kinds of movies that are four kinds of compression movies and non-compression AVI instead of the DICOM format were evaluated by Thurstone's method. The Evaluation factors of movies were determined as "sharpness, granularity, contrast, and comprehensive evaluation." In the virtual bradycardia movie, AVI was the best evaluation at all evaluation factors except the granularity. In the virtual normal movie, an excellent compression technique is different in all evaluation factors. In the virtual tachycardia movie, MPEG-1 was the best evaluation at all evaluation factors expects the contrast. There is a good compression form depending on the speed of movies because of the difference of compression algorithm. It is thought that it is an influence by the difference of the compression between frames. The compression algorithm for movie has the compression between the frames and the intra-frame compression. As the compression algorithm give the different influence to image by each compression method, it is necessary to examine the relation of the compression algorithm and our results.

Academic Visual Identity (AVI): An Act of Symbolic Leadership

ERIC Educational Resources Information Center

Masiki, Trent

2011-01-01

Extensive scholarship exists on both symbolic leadership and corporate visual identity (CVI), yet little scholarly attention has been focused on the intersection of these two bodies of knowledge. In the field of education, that intersection is known as academic visual identity (AVI). The purpose of this article is to demonstrate that AVI…

Agouti signaling protein stimulates cell division in "viable yellow" (A vy/a) mouse liver

USDA-ARS?s Scientific Manuscript database

Enhanced linear growth, hyperplasia, and tumorigenesis are well-known characteristics of "viable yellow" agouti Avy/- mice (1); however, the functional basis for this aspect of the phenotype is unknown. In the present study, we ascertained whether agouti signaling protein (ASIP) levels in Avy/a or a...

Soy protein isolate reduces hepatosteatosis in yellow Avy/a mice without altering coat color phenotype

USDA-ARS?s Scientific Manuscript database

Agouti (Avy/a) mice fed an AIN-93G diet containing the soy isoflavone genistein (GEN) prior to and during pregnancy were reported to shift coat color and body composition phenotypes from obese-yellow towards lean pseudoagouti, suggesting epigenetic programming. Human consumption of purified GEN is r...

Methods of using thermal tolerant avicelase from Acidothermus cellulolyticus

DOEpatents

Adney, William S [Golden, CO; Vinzant, Todd B [Golden, CO; Ding, Shih-You [Golden, CO; Himmel, Michael E [Golden, CO

2011-04-26

The invention provides a thermal tolerant (thermostable) cellulase, AviIII, that is a member of the glycoside hydrolase (GH) family. AviIII was isolated and characterized from Acidothermus cellulolyticus, and, like many cellulases, the disclosed polypeptide and/or its derivatives may be useful for the conversion of biomass into biofuels and chemicals.

Maternal epigenetics and methyl supplements affect agouti gene expression in Avy/a mice.

PubMed

Wolff, G L; Kodell, R L; Moore, S R; Cooney, C A

1998-08-01

'Viable yellow' (Avy/a) mice are larger, obese, hyperinsulinemic, more susceptible to cancer, and, on average, shorter lived than their non-yellow siblings. They are epigenetic mosaics ranging from a yellow phenotype with maximum ectopic agouti overexpression, through a continuum of mottled agouti/yellow phenotypes with partial agouti overexpression, to a pseudoagouti phenotype with minimal ectopic expression. Pseudoagouti Avy/a mice are lean, healthy, and longer lived than their yellow siblings. Here we report that feeding pregnant black a/a dams methyl-supplemented diets alters epigenetic regulation of agouti expression in their offspring, as indicated by increased agouti/black mottling in the direction of the pseudoagouti phenotype. We also present confirmatory evidence that epigenetic phenotypes are maternally heritable. Thus Avy expression, already known to be modulated by imprinting, strain-specific modification, and maternal epigenetic inheritance, is also modulated by maternal diet. These observations suggest, at least in this special case, that maternal dietary supplementation may positively affect health and longevity of the offspring. Therefore, this experimental system should be useful for identifying maternal factors that modulate epigenetic mechanisms, especially DNA methylation, in developing embryos.

Minimizing right ventricular pacing in pacemaker patients with intact and compromised atrioventricular conduction : Results from the EVITA Trial.

PubMed

Bauer, A; Vermeulen, J; Toivonen, L; Voitk, J; Barr, C; Peytchev, P

2015-12-01

Unnecessary ventricular pacing is associated with increased morbidity and mortality. Over the years different algorithms have been developed to reduce right ventricular pacing. Goal of the present study was to test the efficacy of the ventricular intrinsic preference (VIP) algorithm in patients with atrioventricular intact (AVi) and atrioventricular compromised (AVc) AV-conduction. Evaluation of VIP feature in pacemaker patients (EVITA) was a multicenter, prospective, randomized trial (Trials.gov Identifier: NCT00366158). In total, 389 patients were randomized to AVc group: n = 140/132 VIP OFF/VIP On, AVi group: n = 54/63 VIP OFF/VIP ON). One-month post-implantation AV conduction testing (AVc: PR/AR interval > 210 ms) was performed. Follow-up visits occurred 6 and 12 months after DDD-pacemaker implantation. In AVi and AVc-patients initiation of the VIP feature significantly reduced incidence of ventricular pacing (AVi: 53 ± 38 vs. 9 ± 21%, p = 0.0001; AVc: 79 ± 31 vs. 28 ± 35%, p = 0.0001). DDD-pacemaker implantation per se significantly reduced incidence of AF in VIP ON (AVi 27 vs. 0%, p < 0.0001; AVc 29 vs. 3%, p < 0.0001) and VIP OFF patients (AVi 43 vs. 4%, p < 0.0001; AVc 33 vs. 3, p < 0.0001), without significant differences between VIP ON and OFF groups (p > 0.05). In the AVc group activation of VIP significantly reduced incidence of adverse events (AE). All-cause mortality was not significantly different in VIP ON (n = 5) and VIP OFF (n = 4, p > 0.05) patients. AV search hysteresis (VIP) markedly reduces ventricular pacing both in patients with normal AV conduction and in patients with prolonged PR interval or intermittent AV block.

A case study illustrating the use of an attachment video-feedback intervention strategy.

PubMed

Tarabulsy, George M; Dubois-Comtois, Karine; Baudry, Claire; Moss, Ellen; Roberge, Annie; Savage, Laura-Emilie; Cyr, Chantal; St-Laurent, Diane; Bernier, Annie

2018-05-21

Children from high-risk environments are more likely to experience problems in development. Many difficulties are linked to early experiences in the context of the emerging attachment relationship. Over the past 20 years, our group has collaborated with government agencies to develop and implement an attachment-based video-feedback intervention strategy (AVI) that targets parental sensitivity and attachment. This case study presents the manner in which a young mother and her 6-month-old son experienced AVI. The study shows how the absence of maternal sensitivity and responsiveness to infant signals, difficulties in helping the child regulate affect, and problems in autonomy support are addressed via eight semi-structured mentoring visits. Discussion focuses on how AVI may be a helpful addition to primary prevention programs. © 2018 Wiley Periodicals, Inc.

Applicability of avidin protein coated mesoporous silica nanoparticles as drug carriers in the lung

NASA Astrophysics Data System (ADS)

van Rijt, S. H.; Bölükbas, D. A.; Argyo, C.; Wipplinger, K.; Naureen, M.; Datz, S.; Eickelberg, O.; Meiners, S.; Bein, T.; Schmid, O.; Stoeger, T.

2016-04-01

Mesoporous silica nanoparticles (MSNs) exhibit unique drug delivery properties and are thus considered as promising candidates for next generation nano-medicines. In particular, inhalation into the lungs represents a direct, non-invasive delivery route for treating lung disease. To assess MSN biocompatibility in the lung, we investigated the bioresponse of avidin-coated MSNs (MSN-AVI), as well as aminated (uncoated) MSNs, after direct application into the lungs of mice. We quantified MSN distribution, clearance rate, cell-specific uptake, and inflammatory responses to MSNs within one week after instillation. We show that amine-functionalized (MSN-NH2) particles are not taken up by lung epithelial cells, but induced a prolonged inflammatory response in the lung and macrophage cell death. In contrast, MSN-AVI co-localized with alveolar epithelial type 1 and type 2 cells in the lung in the absence of sustained inflammatory responses or cell death, and showed preferential epithelial cell uptake in in vitro co-cultures. Further, MSN-AVI particles demonstrated uniform particle distribution in mouse lungs and slow clearance rates. Thus, we provide evidence that avidin functionalized MSNs (MSN-AVI) have the potential to serve as versatile biocompatible drug carriers for lung-specific drug delivery.Mesoporous silica nanoparticles (MSNs) exhibit unique drug delivery properties and are thus considered as promising candidates for next generation nano-medicines. In particular, inhalation into the lungs represents a direct, non-invasive delivery route for treating lung disease. To assess MSN biocompatibility in the lung, we investigated the bioresponse of avidin-coated MSNs (MSN-AVI), as well as aminated (uncoated) MSNs, after direct application into the lungs of mice. We quantified MSN distribution, clearance rate, cell-specific uptake, and inflammatory responses to MSNs within one week after instillation. We show that amine-functionalized (MSN-NH2) particles are not taken up by lung epithelial cells, but induced a prolonged inflammatory response in the lung and macrophage cell death. In contrast, MSN-AVI co-localized with alveolar epithelial type 1 and type 2 cells in the lung in the absence of sustained inflammatory responses or cell death, and showed preferential epithelial cell uptake in in vitro co-cultures. Further, MSN-AVI particles demonstrated uniform particle distribution in mouse lungs and slow clearance rates. Thus, we provide evidence that avidin functionalized MSNs (MSN-AVI) have the potential to serve as versatile biocompatible drug carriers for lung-specific drug delivery. Electronic supplementary information (ESI) available: Synthesis of MSN particles. Characterisation of MSN particles (Fig. S1 and S2), DLS measurements of MSNs over time, lymphocyte and PMN cell count after MSN exposure (Fig. S3). Toxicity in BAL cytospins controls, phalloidin staining on BAL cytospins of MSN-NH2 exposed mice (Fig. S4), nanoparticle distribution in lung cryo-slices of Balb/c mice exposed to 100 μg MSNs (Fig. S5). Balb/c mice cryo-slices exposed to MSN-AVI for 1 or 7 days, co-stained with alveolar epithelial cell type 1 marker or with alveolar epithelial cell type 2 marker (Fig. S6), DiD selective labeling in a co-culture set-up (Fig. S7). See DOI: 10.1039/c5nr04119h

Site-directed immobilization of a genetically engineered anti-methotrexate antibody via an enzymatically introduced biotin label significantly increases the binding capacity of immunoaffinity columns.

PubMed

Davenport, Kaitlynn R; Smith, Christopher A; Hofstetter, Heike; Horn, James R; Hofstetter, Oliver

2016-05-15

In this study, the effect of random vs. site-directed immobilization techniques on the performance of antibody-based HPLC columns was investigated using a single-domain camelid antibody (VHH) directed against methotrexate (MTX) as a model system. First, the high flow-through support material POROS-OH was activated with disuccinimidyl carbonate (DSC), and the VHH was bound in a random manner via amines located on the protein's surface. The resulting column was characterized by Frontal Affinity Chromatography (FAC). Then, two site-directed techniques were explored to increase column efficiency by immobilizing the antibody via its C-terminus, i.e., away from the antigen-binding site. In one approach, a tetra-lysine tail was added, and the antibody was immobilized onto DSC-activated POROS. In the second site-directed approach, the VHH was modified with the AviTag peptide, and a biotin-residue was enzymatically incorporated at the C-terminus using the biotin ligase BirA. The biotinylated antibody was subsequently immobilized onto NeutrAvidin-derivatized POROS. A comparison of the FAC analyses, which for all three columns showed excellent linearity (R(2)>0.999), revealed that both site-directed approaches yield better results than the random immobilization; the by far highest efficiency, however, was determined for the immunoaffinity column based on AviTag-biotinylated antibody. As proof of concept, all three columns were evaluated for quantification of MTX dissolved in phosphate buffered saline (PBS). Validation using UV-detection showed excellent linearity in the range of 0.04-12μM (R(2)>0.993). The lower limit of detection (LOD) and lower limit of quantification (LLOQ) were found to be independent of the immobilization strategy and were 40nM and 132nM, respectively. The intra- and inter-day precision was below 11.6%, and accuracy was between 90.7% and 112%. To the best of our knowledge, this is the first report of the AviTag-system in chromatography, and the first application of immunoaffinity chromatography for the analysis of MTX. Copyright © 2016 Elsevier B.V. All rights reserved.

4DCAPTURE: a general purpose software package for capturing and analyzing two- and three-dimensional motion data acquired from video sequences

NASA Astrophysics Data System (ADS)

Walton, James S.; Hodgson, Peter; Hallamasek, Karen; Palmer, Jake

2003-07-01

4DVideo is creating a general purpose capability for capturing and analyzing kinematic data from video sequences in near real-time. The core element of this capability is a software package designed for the PC platform. The software ("4DCapture") is designed to capture and manipulate customized AVI files that can contain a variety of synchronized data streams -- including audio, video, centroid locations -- and signals acquired from more traditional sources (such as accelerometers and strain gauges.) The code includes simultaneous capture or playback of multiple video streams, and linear editing of the images (together with the ancilliary data embedded in the files). Corresponding landmarks seen from two or more views are matched automatically, and photogrammetric algorithms permit multiple landmarks to be tracked in two- and three-dimensions -- with or without lens calibrations. Trajectory data can be processed within the main application or they can be exported to a spreadsheet where they can be processed or passed along to a more sophisticated, stand-alone, data analysis application. Previous attempts to develop such applications for high-speed imaging have been limited in their scope, or by the complexity of the application itself. 4DVideo has devised a friendly ("FlowStack") user interface that assists the end-user to capture and treat image sequences in a natural progression. 4DCapture employs the AVI 2.0 standard and DirectX technology which effectively eliminates the file size limitations found in older applications. In early tests, 4DVideo has streamed three RS-170 video sources to disk for more than an hour without loss of data. At this time, the software can acquire video sequences in three ways: (1) directly, from up to three hard-wired cameras supplying RS-170 (monochrome) signals; (2) directly, from a single camera or video recorder supplying an NTSC (color) signal; and (3) by importing existing video streams in the AVI 1.0 or AVI 2.0 formats. The latter is particularly useful for high-speed applications where the raw images are often captured and stored by the camera before being downloaded. Provision has been made to synchronize data acquired from any combination of these video sources using audio and visual "tags." Additional "front-ends," designed for digital cameras, are anticipated.

Marriage and Family Therapists Working with Family Violence: Strained Bedfellows or Compatible Partners?: A Commentary on Avis, Kaufman, and Bograd.

ERIC Educational Resources Information Center

Meth, Richard L.

1992-01-01

Responds to previous articles by Avis, Kaufman, and Bograd on role of marital and family therapists in dealing with family violence among clients. Comments on presentation style of earlier articles and then discusses points of agreement and disagreement with each of the three authors. Concludes by urging therapists to learn more so they can…

The correlation of TAS2R38 gene variants with higher risk for chronic rhinosinusitis in Polish patients.

PubMed

Dżaman, Karolina; Zagor, Mariola; Sarnowska, Elżbieta; Krzeski, Antoni; Kantor, Ireneusz

2016-10-31

Bitter taste receptors (T2Rs), especially T2R38s appear as innovative regulators of innate immunity in the respiratory system. The single nucleotide polymorphisms (SNPs) in TAS2R38 gene may contribute to individual differences in susceptibility to respiratory infections especially chronic rhinosinusitis (CRS). TAS2R38 genotypes distribution varies by geographic region, race and ethnicity. The aim of the preliminary study was the identification of SNPs in TAS2R38 encoding genes in Polish patients with CRS and finding potential correlation with CRS phenotypes. The preliminary study contained 20 CRS patients undergoing functional endoscopic sinus surgery (FESS). Fresh sinus mucosa (SM) was obtained during FESS in CRS patients. Patients were genotyped for TAS2R38 using Sanger method and the genotype occurrences of the clinically recalcitrant CRS cohort was evaluated. Analysis of TAS2R38 expression in SM of CRS patients was performed using immunohistochemistry (IHC). T2R38 was highly expressed in SM of CRS patients. Patients with CRS demonstrated both common genotypes PAV, AVI. The heterozygotes frequency (AVI/PAV) was the highest. The protective genotype (PAV/PAV) was noticed in the lowest frequency and connected with lower average value of CT score compare to AVI/AVI genotypes (p=0.01). The work presented in this study provides the hypothesis that airway bitter T2Rs are an innovative sphere of human respiratory innate protection. TAS2R38 polymorphism may influence the susceptibility to CRS. The AVI haplotypes are an independent risk factors for CRS. Additionally, the bitter taste receptors and related signalling pathways might create an unique group of therapeutic targets to treat CRS.

Maternal ethanol consumption alters the epigenotype and the phenotype of offspring in a mouse model.

PubMed

Kaminen-Ahola, Nina; Ahola, Arttu; Maga, Murat; Mallitt, Kylie-Ann; Fahey, Paul; Cox, Timothy C; Whitelaw, Emma; Chong, Suyinn

2010-01-15

Recent studies have shown that exposure to some nutritional supplements and chemicals in utero can affect the epigenome of the developing mouse embryo, resulting in adult disease. Our hypothesis is that epigenetics is also involved in the gestational programming of adult phenotype by alcohol. We have developed a model of gestational ethanol exposure in the mouse based on maternal ad libitum ingestion of 10% (v/v) ethanol between gestational days 0.5-8.5 and observed changes in the expression of an epigenetically-sensitive allele, Agouti viable yellow (A(vy)), in the offspring. We found that exposure to ethanol increases the probability of transcriptional silencing at this locus, resulting in more mice with an agouti-colored coat. As expected, transcriptional silencing correlated with hypermethylation at A(vy). This demonstrates, for the first time, that ethanol can affect adult phenotype by altering the epigenotype of the early embryo. Interestingly, we also detected postnatal growth restriction and craniofacial dysmorphology reminiscent of fetal alcohol syndrome, in congenic a/a siblings of the A(vy) mice. These findings suggest that moderate ethanol exposure in utero is capable of inducing changes in the expression of genes other than A(vy), a conclusion supported by our genome-wide analysis of gene expression in these mice. In addition, offspring of female mice given free access to 10% (v/v) ethanol for four days per week for ten weeks prior to conception also showed increased transcriptional silencing of the A(vy) allele. Our work raises the possibility of a role for epigenetics in the etiology of fetal alcohol spectrum disorders, and it provides a mouse model that will be a useful resource in the continued efforts to understand the consequences of gestational alcohol exposure at the molecular level.

An Alternative Laboratory Designed to Address Ethical Concerns Associated with Traditional "TAS2R38" Student Genotyping

ERIC Educational Resources Information Center

LaBonte, Michelle L.; Beers, Melissa A.

2015-01-01

The "TAS2R38" alleles that code for the PAV/AVI T2R38 proteins have long been viewed as benign taste receptor variants. However, recent studies have demonstrated an expanding and medically relevant role for "TAS2R38." The AVI variant of T2R38 is associated with an increased risk of both colorectal cancer and "Pseudomonas…

rAvis: an R-package for downloading information stored in Proyecto AVIS, a citizen science bird project.

PubMed

Varela, Sara; González-Hernández, Javier; Casabella, Eduardo; Barrientos, Rafael

2014-01-01

Citizen science projects store an enormous amount of information about species distribution, diversity and characteristics. Researchers are now beginning to make use of this rich collection of data. However, access to these databases is not always straightforward. Apart from the largest and international projects, citizen science repositories often lack specific Application Programming Interfaces (APIs) to connect them to the scientific environments. Thus, it is necessary to develop simple routines to allow researchers to take advantage of the information collected by smaller citizen science projects, for instance, programming specific packages to connect them to popular scientific environments (like R). Here, we present rAvis, an R-package to connect R-users with Proyecto AVIS (http://proyectoavis.com), a Spanish citizen science project with more than 82,000 bird observation records. We develop several functions to explore the database, to plot the geographic distribution of the species occurrences, and to generate personal queries to the database about species occurrences (number of individuals, distribution, etc.) and birdwatcher observations (number of species recorded by each collaborator, UTMs visited, etc.). This new R-package will allow scientists to access this database and to exploit the information generated by Spanish birdwatchers over the last 40 years.

Delayed Time-to-Treatment of an Antisense Morpholino Oligomer Is Effective against Lethal Marburg Virus Infection in Cynomolgus Macaques.

PubMed

Warren, Travis K; Whitehouse, Chris A; Wells, Jay; Welch, Lisa; Charleston, Jay S; Heald, Alison; Nichols, Donald K; Mattix, Marc E; Palacios, Gustavo; Kugleman, Jeffrey R; Iversen, Patrick L; Bavari, Sina

2016-02-01

Marburg virus (MARV) is an Ebola-like virus in the family Filovirdae that causes sporadic outbreaks of severe hemorrhagic fever with a case fatality rate as high as 90%. AVI-7288, a positively charged antisense phosphorodiamidate morpholino oligomer (PMOplus) targeting the viral nucleoprotein gene, was evaluated as a potential therapeutic intervention for MARV infection following delayed treatment of 1, 24, 48, and 96 h post-infection (PI) in a nonhuman primate lethal challenge model. A total of 30 cynomolgus macaques were divided into 5 groups of 6 and infected with 1,830 plaque forming units of MARV subcutaneously. AVI-7288 was administered by bolus infusion daily for 14 days at 15 mg/kg body weight. Survival was the primary endpoint of the study. While none (0 of 6) of the saline group survived, 83-100% of infected monkeys survived when treatment was initiated 1, 24, 48, or 96 h post-infection (PI). The antisense treatment also reduced serum viremia and inflammatory cytokines in all treatment groups compared to vehicle controls. The antibody immune response to virus was preserved and tissue viral antigen was cleared in AVI-7288 treated animals. These data show that AVI-7288 protects NHPs against an otherwise lethal MARV infection when treatment is initiated up to 96 h PI.

rAvis: An R-Package for Downloading Information Stored in Proyecto AVIS, a Citizen Science Bird Project

PubMed Central

Varela, Sara; González-Hernández, Javier; Casabella, Eduardo; Barrientos, Rafael

2014-01-01

Citizen science projects store an enormous amount of information about species distribution, diversity and characteristics. Researchers are now beginning to make use of this rich collection of data. However, access to these databases is not always straightforward. Apart from the largest and international projects, citizen science repositories often lack specific Application Programming Interfaces (APIs) to connect them to the scientific environments. Thus, it is necessary to develop simple routines to allow researchers to take advantage of the information collected by smaller citizen science projects, for instance, programming specific packages to connect them to popular scientific environments (like R). Here, we present rAvis, an R-package to connect R-users with Proyecto AVIS (http://proyectoavis.com), a Spanish citizen science project with more than 82,000 bird observation records. We develop several functions to explore the database, to plot the geographic distribution of the species occurrences, and to generate personal queries to the database about species occurrences (number of individuals, distribution, etc.) and birdwatcher observations (number of species recorded by each collaborator, UTMs visited, etc.). This new R-package will allow scientists to access this database and to exploit the information generated by Spanish birdwatchers over the last 40 years. PMID:24626233

Exposure to Soy Protein Isolate From Conception Fails to Induce Epigenetic Changes in Viable Yellow Agouti (Avy/a) Mice, But Partially Blocks Hepatosteatosis and Altered Body Composition in Mice and Rats

USDA-ARS?s Scientific Manuscript database

Both beneficial and adverse health effects have been attributed to soy food consumption. Epigenetic programming through hypermethlylation of CpG sites on promoter regions may be a potential mechanism. Virgin a/a female and Avy/a male mice were fed AIN-93G diets made with either casein or soy protein...

A Novel Virus-Like Particle Based Vaccine Platform Displaying the Placental Malaria Antigen VAR2CSA.

PubMed

Thrane, Susan; Janitzek, Christoph M; Agerbæk, Mette Ø; Ditlev, Sisse B; Resende, Mafalda; Nielsen, Morten A; Theander, Thor G; Salanti, Ali; Sander, Adam F

2015-01-01

Placental malaria caused by Plasmodium falciparum is a major cause of mortality and severe morbidity. Clinical testing of a soluble protein-based vaccine containing the parasite ligand, VAR2CSA, has been initiated. VAR2CSA binds to the human receptor chondroitin sulphate A (CSA) and is responsible for sequestration of Plasmodium falciparum infected erythrocytes in the placenta. It is imperative that a vaccine against malaria in pregnancy, if administered to women before they become pregnant, can induce a strong and long lasting immune response. While most soluble protein-based vaccines have failed during clinical testing, virus-like particle (VLP) based vaccines (e.g., the licensed human papillomavirus vaccines) have demonstrated high efficacy, suggesting that the spatial assembly of the vaccine antigen is a critical parameter for inducing an optimal long-lasting protective immune response. We have developed a VLP vaccine display platform by identifying regions of the HPV16 L1 coat protein where a biotin acceptor site (AviTagTM) can be inserted without compromising VLP-assembly. Subsequent biotinylation of Avi-L1 VLPs allow us to anchor monovalent streptavidin (mSA)-fused proteins to the biotin, thereby obtaining a dense and repetitive VLP-display of the vaccine antigen. The mSA-VAR2CSA antigen was delivered on the Avi-L1 VLP platform and tested in C57BL/6 mice in comparison to two soluble protein-based vaccines consisting of naked VAR2CSA and mSA-VAR2CSA. The mSA-VAR2CSA Avi-L1 VLP and soluble mSA-VAR2CSA vaccines induced higher antibody titers than the soluble naked VAR2CSA vaccine after three immunizations. The VAR2CSA Avi-L1 VLP vaccine induced statistically significantly higher endpoint titres compared to the soluble mSA-VAR2CSA vaccine, after 1st and 2nd immunization; however, this difference was not statistically significant after 3rd immunization. Importantly, the VLP-VAR2CSA induced antibodies were functional in inhibiting the binding of parasites to CSA. This study demonstrates that the described Avi-L1 VLP-platform may serve as a versatile system for facilitating optimal VLP-display of large and complex vaccine antigens.

Biotin-avidin mediates the binding of adipose-derived stem cells to a porous β-tricalcium phosphate scaffold: Mandibular regeneration

PubMed Central

FENG, ZIHAO; LIU, JIAQI; SHEN, CONGCONG; LU, NANHANG; ZHANG, YONG; YANG, YANWEN; QI, FAZHI

2016-01-01

The present study aimed to investigate the properties of a promising bone scaffold for bone repair, which consisted of a novel composite of adipose-derived stem cells (ADSCs) attached to a porous β-tricalcium phosphate (β-TCP) scaffold with platelet-rich plasma (PRP). The β-TCP powder was synthesized and its composition was determined using X-ray diffraction and Fourier transform infrared spectroscopy. The surface morphology and microstructure of the fabricated porous β-TCP scaffold samples were analyzed using light and scanning electron microscopy, and their porosity and compressive strength were also evaluated. In addition, the viability of rabbit ADSCs incubated with various concentrations of the β-TCP extraction fluid was analyzed. The rate of attachment and the morphology of biotinylated ADSCs (Bio-ADSCs) on avidin-coated β-TCP (Avi-β-TCP), and untreated ADSCs on β-TCP, were compared. Furthermore, in vivo bone-forming abilities were determined following the implantation of group 1 (Bio-ADSCs/Avi-β-TCP) and group 2 (Bio-ADSCs/Avi-β-TCP/PRP) constructs using computed tomography, and histological osteocalcin (OCN) and alkaline phosphatase (ALP) expression analyses in a rabbit model of mandibulofacial defects. The β-TCP scaffold exhibited a high porosity (71.26±0.28%), suitable pore size, and good mechanical strength (7.93±0.06 MPa). Following incubation with β-TCP for 72 h, 100% of viable ADSCs remained. The avidin-biotin binding system significantly increased the initial attachment rate of Bio-ADSCs to Avi-β-TCP in the first hour (P<0.01). Following the addition of PRP, group 2 exhibited a bony-union and mandibular body shape, newly formed bone and increased expression levels of OCN and ALP in the mandibulofacial defect area, as compared with group 1 (P<0.05). The results of the present study suggested that the novel Bio-ADSCs/Avi-β-TCP/PRP composite may have potential application in bone repair and bone tissue engineering. PMID:26997987

TAS2R38 and CA6 genetic polymorphisms, frequency of bitter food intake, and blood biomarkers among elderly woman.

PubMed

Mikołajczyk-Stecyna, Joanna; Malinowska, Anna M; Chmurzynska, Agata

2017-09-01

Taste sensitivity is one of the most important biological determinants of food choice. Three SNPs of the TAS2R38 gene (rs713598, rs1726866, and rs10246939) give rise to two common haplotypes: PAV and AVI. These haplotypes, as well as an SNP within the CA6 gene (rs2274333) that encodes carbonic anhydrase VI (CA6), correlate with bitterness perception. The extent of consumption of bitter food may influence some health outcomes. The aim of this study is thus to investigate the impact of the TAS2R38 and CA6 genetic polymorphisms on the choice of bitter food, BMI, blood lipoprotein, and glucose concentrations as well as systemic inflammation in elderly women. The associations between the TAS2R38 diplotype, CA6 genotype, and the intake of bitter-tasting foods were studied in a group of 118 Polish women over 60 years of age. The intake of Brassica vegetables, grapefruit, and coffee was assessed using a food frequency questionnaire. Biochemical parameters were measured using the spectrophotometric method. Genotyping was performed using the high resolution melting method. We found a correlation between lipid profile, glucose and CRP levels, and frequency of bitter food intake. The AVI/AVI subjects drank coffee more frequently than did the PAV/PAV homozygotes, as did the A carriers of CA6 in comparison with the GG homozygotes. We also observed that simultaneous carriers of the PAV haplotype and A allele of TAS2R38 and CA6, respectively, choose white cabbage more frequent and had lower plasma levels of CRP and glucose than did AVI/AVI and GG homozygotes. In elderly women, the TAS2R38 and CA6 polymorphisms may affect the frequency of consumption of coffee and white cabbage, but not of other bitter-tasting foods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Efficient and versatile one-step affinity purification of in vivo biotinylated proteins: Expression, characterization and structure analysis of recombinant human glutamate carboxypeptidase II

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tykvart, J.; Sacha, P.; Barinka, C.

2012-02-07

Affinity purification is a useful approach for purification of recombinant proteins. Eukaryotic expression systems have become more frequently used at the expense of prokaryotic systems since they afford recombinant eukaryotic proteins with post-translational modifications similar or identical to the native ones. Here, we present a one-step affinity purification set-up suitable for the purification of secreted proteins. The set-up is based on the interaction between biotin and mutated streptavidin. Drosophila Schneider 2 cells are chosen as the expression host, and a biotin acceptor peptide is used as an affinity tag. This tag is biotinylated by Escherichia coli biotin-protein ligase in vivo.more » We determined that localization of the ligase within the ER led to the most effective in vivo biotinylation of the secreted proteins. We optimized a protocol for large-scale expression and purification of AviTEV-tagged recombinant human glutamate carboxypeptidase II (Avi-GCPII) with milligram yields per liter of culture. We also determined the 3D structure of Avi-GCPII by X-ray crystallography and compared the enzymatic characteristics of the protein to those of its non-tagged variant. These experiments confirmed that AviTEV tag does not affect the biophysical properties of its fused partner. Purification approach, developed here, provides not only a sufficient amount of highly homogenous protein but also specifically and effectively biotinylates a target protein and thus enables its subsequent visualization or immobilization.« less

Studies and projections of hydraulic conductivity of Devonian Plavinu and Daugava carbonate aquifers in Latvia

NASA Astrophysics Data System (ADS)

Perkone, E.; Delina, A.; Saks, T.; Raga, B.; Jātnieks, J.; Klints, I.; Popovs, K.; Babre, A.; Bikše, J.; Kalvāns, A.; Retike, I.; Ukass, J.

2012-04-01

Carbonate aquifers show a very wide range of hydrogeological characteristics. Carbonate rock hydrogeology display two extremes: on one hand hydrogeological properties of the carbonates are governed by the pathways of the preferential groundwater flow typical in karstic regions, on the other - some carbonate aquifers behave almost like a homogeneous, isotropic, porous medium. Most lie between these extremes, but these case variations complicates the study of carbonate aquifer properties. In this study the results of the hydraulic conductivity in carbonate aquifers measurements, hydraulic conductivity correlation between sediments lithology and the aquifer surface depth and fractures research is presented. Upper Devonian Frasnian stage Pļaviņu and Daugava carbonate aquifers in the Latvian part of the Baltic basin is considered. The aim of this research is to elaborate characteristic hydraulic conductivity values for each aquifer based on existing data of the pumping test results and other aquifer properties. Pļaviņu and Daugava carbonate aquifers mainly consist of jointed dolomite with intermediate layers of dolomitic marlstone, limestone, clays and gypsum. These aquifers are prevalent in most of the study area, except Northern and South - Eastern parts of the territory. In geological structure Daugava aquifer lies above Pļaviņu aquifer. Daugava aquifer depth changes from 10 - 20 and even less meters in Eastern part to 250 - 300 m in South - West part of study area, but thickness varies from few meters to 30 m. Pļaviņu aquifer surface depth varies from 20 - 30 m, but in uplands surface depth reaches more than 120 m, in Eastern part to more than 300 m in South - West part of study area. Aquifer average thickness varies from 20 - 40 m, but in areas with buried valleys thickness can be less than 10 meters. Outcrops of these sediments are occurring in banks of largest rivers and in some areas aquifers are karstified. In studies of the carbonate aquifers it is very important to take into account the fact that groundwater flow in carbonate aquifers is often almost entirely dependent on jointing and concomitant joint enlargement by dissolution. In this study pumping test results provide a wide range of hydraulic conductivity values, for example in Pļaviņu aquifer hydraulic conductivity varies from 0,03 - 266 m/day but in Daugava aquifer values range from 0,06 - 735 m/day. Pumping test results is provided by Latvian Environment, Geology and Meteorology Centre. Studying average values of hydraulic conductivity there exists a correlation between K and aquifer flat depth - Daugava aquifer, which in geological structure, is located above the Pļaviņu aquifer has higher average K value - 32 m/day, in Pļaviņu aquifer - 27 m/day. Correlative study of the depth and hydraulic conductivity allowed to characterize the mean values as function of the aquifer depth for the regional groundwater flow modelling. This study is supported by the European Social Fund project No. 2009/0212/1DP/1.1.1.2.0/09/APIA/VIAA/060

Expression and purification of E. coli BirA biotin ligase for in vitro biotinylation.

PubMed

Li, Yifeng; Sousa, Rui

2012-03-01

The extremely tight binding between biotin and avidin or streptavidin makes labeling proteins with biotin a useful tool for many applications. BirA is the Escherichia coli biotin ligase that site-specifically biotinylates a lysine side chain within a 15-amino acid acceptor peptide (also known as Avi-tag). As a complementary approach to in vivo biotinylation of Avi-tag-bearing proteins, we developed a protocol for producing recombinant BirA ligase for in vitro biotinylation. The target protein was expressed as both thioredoxin and MBP fusions, and was released from the corresponding fusion by TEV protease. The liberated ligase was separated from its carrier using HisTrap HP column. We obtained 24.7 and 27.6 mg BirA ligase per liter of culture from thioredoxin and MBP fusion constructs, respectively. The recombinant enzyme was shown to be highly active in catalyzing in vitro biotinylation. The described protocol provides an effective means for making BirA ligase that can be used for biotinylation of different Avi-tag-bearing substrates. Copyright © 2011 Elsevier Inc. All rights reserved.

Magnetic force driven six degree-of-freedom active vibration isolation system using a phase compensated velocity sensor.

PubMed

Kim, Yongdae; Kim, Sangyoo; Park, Kyihwan

2009-04-01

A six-axis active vibration isolation system (AVIS) is developed using voice coil actuators. Point contact configuration is employed to have an easy assembly of eight voice coil actuators to an upper and a base plates. The velocity sensor, using an electromagnetic principle that is commonly used in the vibration control, is investigated since its phase lead characteristic causes an instability problem for a low frequency vibration. The performances of the AVIS are investigated in the frequency domain and finally validated by comparing with the passive isolation system using the atomic force microscope images.

Life-threatening hemothorax due to azygos vein rupture after chest compression during cardiopulmonary resuscitation.

PubMed

Yang, Euiseok; Jeong, WonJoon; Lee, JunWan; Kim, SeungWhan

2014-11-01

Hemothorax is not an uncommon cardiopulmonary resuscitation(CPR)–related complication. But hemothorax related to azygos vein injury (AVI) is a rare condition following blunt chest trauma, with no report of CPR-related AVI in the literature. We present a case of azygosve in rupture in a middle-aged woman after repeated chest compression during 1 hour of CPR. She eventually presented with massive hemothorax due to azygos vein rupture diagnosed by computed tomography (CT). When faced with a patient with massive hemothorax after chest compression, azygos vein rupture should be considered as a complication.

High Rates of Nonsusceptibility to Ceftazidime-avibactam and Identification of New Delhi Metallo-β-lactamase Production in Enterobacteriaceae Bloodstream Infections at a Major Cancer Center.

PubMed

Aitken, Samuel L; Tarrand, Jeffrey J; Deshpande, Lalitagauri M; Tverdek, Frank P; Jones, Anne L; Shelburne, Samuel A; Prince, Randall A; Bhatti, Micah M; Rolston, Kenneth V I; Jones, Ronald N; Castanheira, Mariana; Chemaly, Roy F

2016-10-01

Resistance to the novel β-lactam/β-lactamase inhibitor combination ceftazidime-avibactam (CAZ-AVI) among carbapenem-resistant Enterobacteriaceae (CRE) has infrequently been reported in the United States. We report unexpectedly high rates of resistance to CAZ-AVI in CRE bloodstream isolates at our institution associated with the nonoutbreak spread of New Delhi metallo-β-lactamase in diverse Enterobacteriaceae species. © The Author 2016. Published by Oxford University Press for the Infectious Diseases Society of America. All rights reserved. For permissions, e-mail journals.permissions@oup.com.

PREVAIL TRANSAPICAL: multicentre trial of transcatheter aortic valve implantation using the newly designed bioprosthesis (SAPIEN-XT) and delivery system (ASCENDRA-II).

PubMed

Walther, Thomas; Thielmann, Matthias; Kempfert, Joerg; Schroefel, Holger; Wimmer-Greinecker, Gerhard; Treede, Hendrik; Wahlers, Thorsten; Wendler, Olaf

2012-08-01

Transapical (TA) aortic valve implantation (AVI) has evolved as an alternative procedure for high-risk patients. We evaluated the second-generation SAPIEN XT™ prosthesis in a prospective multicentre clinical trial. A total of 150 patients (age: 81.6 ± 5.8 years; 40.7% female) were included. Prosthetic valves (diameter: 23 mm (n = 36), 26 mm (n = 57) and 29 mm (n = 57)) were implanted. The ASCENDRA-II™ modified delivery system was used in the smaller sizes. Mean logistic EuroSCORE was 24.3 ± 7.0%, and mean STS score 7.5 ± 4.4%. All patients gave written informed consent. Off-pump AVI was performed using femoral arterial and venous access wires as a safety net. All but two patients received TA-AVI, as planned. The 29-mm valve showed similar function as the values of two other diameters did. Three patients (2%) required temporary cardiopulmonary bypass support. Postoperative complications included renal failure requiring long-term dialysis in four, bleeding requiring rethoracotomy in four, respiratory complication requiring reintubation in eight and sepsis in four patients, respectively. Thirty-day mortality was 13 (8.7%) for the total cohort and 2/57 (3.5%) for patients receiving the 29-mm valve, respectively. Echocardiography at discharge showed none or trivial aortic incompetence (AI) in 71% and mild-AI in 22% of the patients. Post-implantation AI was predominantly paravalvular and ≥ 2+ in 7% of patients. One patient required reoperation for AI within 30 days. The PREVAIL TA multicentre trial demonstrates good functionality and good outcomes for TA-AVI, using the SAPIEN XT™ prosthesis and its second-generation ASCENDRA-II™ delivery system, as well successful introduction of the 29-mm SAPIEN XT™ valve for the benefit of high-risk elderly patients.

Origin of the color of Cv. rhapsody in blue rose and some other so-called "blue" roses.

PubMed

Gonnet, Jean-François

2003-08-13

Flowers of the rose cultivar Rhapsody in Blue display unusual colors, changing as they age, from a vivid red-purple to a lighter and duller purple, which are based on tonalities corresponding to hue angles between 340 and 320 degrees in the CIELAB scale. Unexpectedly, the chemical basis of these colors is among the simplest, featuring cyanin (cyanidin 3,5-di-O-glucoside), the most frequent anthocyanin in flowers, as the sole pigment and quercetin kaempferol glycosides as copigments at a relatively low copigment/pigment ratio (about 3/1), which usually produces magenta or red shades in roses. This color shift to bluer shades is coupled with the progressive accumulation of cyanin into vacuolar anthocyanic inclusions (AVIs), the occurrence of which increases as the petals grow older. In addition to the normal lambda(max) of cyanin at approximately 545 nm, the transmission spectra of live petals and of epidermal cells exhibit a second lambda(max) in the 620-625 nm range, the relative importance increasing with the presence of AVIs. In petals of fully opened flowers, the only pigmented structures in the vacuoles of epidermal cells are AVIs; their intense and massive absorption in the 520-640 nm area produces a much darker and bluer color than measured for the vacuolar solution present at the very first opening stage. Cyanin is probably "trapped" into AVIs at higher concentrations than would be possible in a vacuolar solution and in quinonoidal form, appearing purple-blue because of additional absorption in the 580-630 nm area. Quite similar pigmentation features were found in very ancient rose cultivars (cv. L'Evêque or Bleu Magenta), also displaying this type of so-called "blue" color.

Transapical Aortic Valve Replacement under Real-time Magnetic Resonance Imaging Guidance: Experimental Results with Balloon-Expandable and Self-Expanding Stents

PubMed Central

Horvath, Keith A.; Mazilu, Dumitru; Kocaturk, Ozgur; Li, Ming

2010-01-01

Objective Aortic valves have been implanted on self-expanding (SE) and balloon-expandable (BE) stents minimally invasively. We have demonstrated the advantages of transapical aortic valve implantation (tAVI) under real-time magnetic resonance imaging (rtMRI) guidance. Whether there are different advantages to SE or BE stents is unknown. We report rtMRI guided tAVI in a porcine model using both SE and BE stents, and compare the differences between the stents. Methods Twenty-two Yucatan pigs (45-57kgs.) underwent tAVI. Commercially available stentless bioprostheses (21-25mm) were mounted on either BE platinum-iridium stents or SE nitinol stents. rtMRI guidance was employed as the intraoperative imaging. Markers on both types of stents were used to enhance the visualization in rtMRI. Pigs were allowed to survive and had follow-up MRI scans and echocardiography at 1, 3 and 6 months postoperatively. Results rtMRI provided excellent visualization of the aortic valve implantation mounted on both stent types. The implantation times were shorter with the SE stents (60±14 seconds) than BE (74±18s), (p=0.027). Total procedure time was 31 and 37 minutes respectively (p=0.12). It was considerably easier to manipulate the SE stent during deployment without hemodynamic compromise. This was not always the case with the BE stent and its placement occasionally resulted in coronary obstruction and death. Long-term results demonstrated stability of the implants with preservation of myocardial perfusion and function over time for both stents. Conclusions SE stents were easier to position and deploy thus leading to fewer complications during tAVI. Future optimization of SE stent design should improve clinical results. PMID:20971017

Rapid real-time PCR methods to distinguish Salmonella Enteritidis wildtype field isolates from vaccine strains Salmovac SE/Gallivac SE and AviPro SALMONELLA VAC E.

PubMed

Maurischat, Sven; Szabo, Istvan; Baumann, Beatrice; Malorny, Burkhard

2015-05-01

Salmonella enterica serovar Enteritidis is a major non-typhoid Salmonella serovar causing human salmonellosis mainly associated with the consumption of poultry and products thereof. To reduce infections in poultry, S. Enteritidis live vaccine strains AviPro SALMONELLA VAC E and Salmovac SE/Gallivac SE have been licensed and used in several countries worldwide. To definitively diagnose a S. Enteritidis contamination in vaccinated herds a reliable and fast method for the differentiation between vaccine and wildtype field isolates is required. In this study, we developed and validated real-time PCR (qPCR) assays to distinguish those variants genetically. Suitable target sequences were identified by whole genome sequencing (WGS) using the Illumina MiSeq system. SNP regions in kdpA and nhaA proved to be most useful for differentiation of AviPro SALMONELLA VAC E and Salmovac SE/Gallivac SE, respectively, from wildtype strains. For each vaccine strain one TaqMan-qPCR assay and one alternative approach using High Resolution Melting (HRM) analysis was designed. All 30 Salmovac SE and 7 AviPro SALMONELLA VAC E vaccine strain reisolates tested were correctly identified by both approaches (100% inclusivity). Furthermore, all 137 (TaqMan) and 97 (HRM) Salmonella non-vaccine and related Enterobacteriaceae strains tested were excluded (100% exclusivity). The analytical detection limits were determined to be approx. 10(2) genome copies/reaction for the TaqMan and 10(4) genome copies/reaction for the HRM approach. The real-time PCR assays proved to be a reliable and fast alternative to the cultural vaccine strain identification tests helping decision makers in control measurements to take action within a shorter period of time. Copyright © 2015 Elsevier B.V. All rights reserved.

High sensitivity to multisensory conflicts in agoraphobia exhibited by virtual reality.

PubMed

Viaud-Delmon, Isabelle; Warusfel, Olivier; Seguelas, Angeline; Rio, Emmanuel; Jouvent, Roland

2006-10-01

The primary aim of this study was to evaluate the effect of auditory feedback in a VR system planned for clinical use and to address the different factors that should be taken into account in building a bimodal virtual environment (VE). We conducted an experiment in which we assessed spatial performances in agoraphobic patients and normal subjects comparing two kinds of VEs, visual alone (Vis) and auditory-visual (AVis), during separate sessions. Subjects were equipped with a head-mounted display coupled with an electromagnetic sensor system and immersed in a virtual town. Their task was to locate different landmarks and become familiar with the town. In the AVis condition subjects were equipped with the head-mounted display and headphones, which delivered a soundscape updated in real-time according to their movement in the virtual town. While general performances remained comparable across the conditions, the reported feeling of immersion was more compelling in the AVis environment. However, patients exhibited more cybersickness symptoms in this condition. The result of this study points to the multisensory integration deficit of agoraphobic patients and underline the need for further research on multimodal VR systems for clinical use.

Explaining and predicting individually experienced liking of berry fractions by the hTAS2R38 taste receptor genotype.

PubMed

Laaksonen, Oskar; Ahola, Johanna; Sandell, Mari

2013-02-01

The roles of taste and astringent properties, food choice motives and health concerns in liking of bilberry and crowberry samples were studied using a sensory panel prescreened for the hTAS2R38 taste receptor genotype. The subjects rated the intensity of sourness, bitterness and two astringent properties (soft, velvety and rough, puckering) of all berry samples. They also scored the liking of juice fractions and completed a food choice motive and health concern questionnaire. Regression models were used to combine different data sets and to predict liking of the extracts. Sourness contributed positively to the liking of berry fractions, and bitterness and rough astringency were negative factors. The hTAS2R38 genotype affected the liking of polyphenol-rich extracts, which were significantly bitter and astringent. Based on the genotype grouping of subjects, PAV homozygotes gave lower ratings to the attributes than AVI homozygotes. In contrast, PAV homozygotes were predicted to dislike the extracts notably more than AVI homozygotes. Health concern and food choice motives related to health and weight control had significant roles in individual liking of juice fractions. Our results indicate that mood was more important to the PAV homozygotes than to the AVI homozygotes. Copyright © 2012 Elsevier Ltd. All rights reserved.

The penetrance of an epigenetic trait in mice is progressively yet reversibly increased by selection and environment.

PubMed

Cropley, Jennifer E; Dang, Thurston H Y; Martin, David I K; Suter, Catherine M

2012-06-22

Natural selection acts on variation that is typically assumed to be genetic in origin. But epigenetic mechanisms, which are interposed between the genome and its environment, can create diversity independently of genetic variation. Epigenetic states can respond to environmental cues, and can be heritable, thus providing a means by which environmentally responsive phenotypes might be selectable independent of genotype. Here, we have tested the possibility that environment and selection can act together to increase the penetrance of an epigenetically determined phenotype. We used isogenic A(vy) mice, in which the epigenetic state of the A(vy) allele is sensitive to dietary methyl donors. By combining methyl donor supplementation with selection for a silent A(vy) allele, we progressively increased the prevalence of the associated phenotype in the population over five generations. After withdrawal of the dietary supplement, the shift persisted for one generation but was lost in subsequent generations. Our data provide the first demonstration that selection for a purely epigenetic trait can result in cumulative germline effects in mammals. These results present an alternative to the paradigm that natural selection acts only on genetic variation, and suggest that epigenetic changes could underlie rapid adaptation of species in response to natural environmental fluctuations.

The penetrance of an epigenetic trait in mice is progressively yet reversibly increased by selection and environment

PubMed Central

Cropley, Jennifer E.; Dang, Thurston H. Y.; Martin, David I. K.; Suter, Catherine M.

2012-01-01

Natural selection acts on variation that is typically assumed to be genetic in origin. But epigenetic mechanisms, which are interposed between the genome and its environment, can create diversity independently of genetic variation. Epigenetic states can respond to environmental cues, and can be heritable, thus providing a means by which environmentally responsive phenotypes might be selectable independent of genotype. Here, we have tested the possibility that environment and selection can act together to increase the penetrance of an epigenetically determined phenotype. We used isogenic Avy mice, in which the epigenetic state of the Avy allele is sensitive to dietary methyl donors. By combining methyl donor supplementation with selection for a silent Avy allele, we progressively increased the prevalence of the associated phenotype in the population over five generations. After withdrawal of the dietary supplement, the shift persisted for one generation but was lost in subsequent generations. Our data provide the first demonstration that selection for a purely epigenetic trait can result in cumulative germline effects in mammals. These results present an alternative to the paradigm that natural selection acts only on genetic variation, and suggest that epigenetic changes could underlie rapid adaptation of species in response to natural environmental fluctuations. PMID:22319121

Selecting Optimal Random Forest Predictive Models: A Case Study on Predicting the Spatial Distribution of Seabed Hardness

PubMed Central

Li, Jin; Tran, Maggie; Siwabessy, Justy

2016-01-01

Spatially continuous predictions of seabed hardness are important baseline environmental information for sustainable management of Australia’s marine jurisdiction. Seabed hardness is often inferred from multibeam backscatter data with unknown accuracy and can be inferred from underwater video footage at limited locations. In this study, we classified the seabed into four classes based on two new seabed hardness classification schemes (i.e., hard90 and hard70). We developed optimal predictive models to predict seabed hardness using random forest (RF) based on the point data of hardness classes and spatially continuous multibeam data. Five feature selection (FS) methods that are variable importance (VI), averaged variable importance (AVI), knowledge informed AVI (KIAVI), Boruta and regularized RF (RRF) were tested based on predictive accuracy. Effects of highly correlated, important and unimportant predictors on the accuracy of RF predictive models were examined. Finally, spatial predictions generated using the most accurate models were visually examined and analysed. This study confirmed that: 1) hard90 and hard70 are effective seabed hardness classification schemes; 2) seabed hardness of four classes can be predicted with a high degree of accuracy; 3) the typical approach used to pre-select predictive variables by excluding highly correlated variables needs to be re-examined; 4) the identification of the important and unimportant predictors provides useful guidelines for further improving predictive models; 5) FS methods select the most accurate predictive model(s) instead of the most parsimonious ones, and AVI and Boruta are recommended for future studies; and 6) RF is an effective modelling method with high predictive accuracy for multi-level categorical data and can be applied to ‘small p and large n’ problems in environmental sciences. Additionally, automated computational programs for AVI need to be developed to increase its computational efficiency and caution should be taken when applying filter FS methods in selecting predictive models. PMID:26890307

Selecting Optimal Random Forest Predictive Models: A Case Study on Predicting the Spatial Distribution of Seabed Hardness.

PubMed

Li, Jin; Tran, Maggie; Siwabessy, Justy

2016-01-01

Spatially continuous predictions of seabed hardness are important baseline environmental information for sustainable management of Australia's marine jurisdiction. Seabed hardness is often inferred from multibeam backscatter data with unknown accuracy and can be inferred from underwater video footage at limited locations. In this study, we classified the seabed into four classes based on two new seabed hardness classification schemes (i.e., hard90 and hard70). We developed optimal predictive models to predict seabed hardness using random forest (RF) based on the point data of hardness classes and spatially continuous multibeam data. Five feature selection (FS) methods that are variable importance (VI), averaged variable importance (AVI), knowledge informed AVI (KIAVI), Boruta and regularized RF (RRF) were tested based on predictive accuracy. Effects of highly correlated, important and unimportant predictors on the accuracy of RF predictive models were examined. Finally, spatial predictions generated using the most accurate models were visually examined and analysed. This study confirmed that: 1) hard90 and hard70 are effective seabed hardness classification schemes; 2) seabed hardness of four classes can be predicted with a high degree of accuracy; 3) the typical approach used to pre-select predictive variables by excluding highly correlated variables needs to be re-examined; 4) the identification of the important and unimportant predictors provides useful guidelines for further improving predictive models; 5) FS methods select the most accurate predictive model(s) instead of the most parsimonious ones, and AVI and Boruta are recommended for future studies; and 6) RF is an effective modelling method with high predictive accuracy for multi-level categorical data and can be applied to 'small p and large n' problems in environmental sciences. Additionally, automated computational programs for AVI need to be developed to increase its computational efficiency and caution should be taken when applying filter FS methods in selecting predictive models.

Klebsiella pneumoniae Carbapenemase-2 (KPC-2), Substitutions at Ambler Position Asp179, and Resistance to Ceftazidime-Avibactam: Unique Antibiotic-Resistant Phenotypes Emerge from β-Lactamase Protein Engineering.

PubMed

Barnes, Melissa D; Winkler, Marisa L; Taracila, Magdalena A; Page, Malcolm G; Desarbre, Eric; Kreiswirth, Barry N; Shields, Ryan K; Nguyen, Minh-Hong; Clancy, Cornelius; Spellberg, Brad; Papp-Wallace, Krisztina M; Bonomo, Robert A

2017-10-31

The emergence of Klebsiella pneumoniae carbapenemases (KPCs), β-lactamases that inactivate "last-line" antibiotics such as imipenem, represents a major challenge to contemporary antibiotic therapies. The combination of ceftazidime (CAZ) and avibactam (AVI), a potent β-lactamase inhibitor, represents an attempt to overcome this formidable threat and to restore the efficacy of the antibiotic against Gram-negative bacteria bearing KPCs. CAZ-AVI-resistant clinical strains expressing KPC variants with substitutions in the Ω-loop are emerging. We engineered 19 KPC-2 variants bearing targeted mutations at amino acid residue Ambler position 179 in Escherichia coli and identified a unique antibiotic resistance phenotype. We focus particularly on the CAZ-AVI resistance of the clinically relevant Asp179Asn variant. Although this variant demonstrated less hydrolytic activity, we demonstrated that there was a prolonged period during which an acyl-enzyme intermediate was present. Using mass spectrometry and transient kinetic analysis, we demonstrated that Asp179Asn "traps" β-lactams, preferentially binding β-lactams longer than AVI owing to a decreased rate of deacylation. Molecular dynamics simulations predict that (i) the Asp179Asn variant confers more flexibility to the Ω-loop and expands the active site significantly; (ii) the catalytic nucleophile, S70, is shifted more than 1.5 Å and rotated more than 90°, altering the hydrogen bond networks; and (iii) E166 is displaced by 2 Å when complexed with ceftazidime. These analyses explain the increased hydrolytic profile of KPC-2 and suggest that the Asp179Asn substitution results in an alternative complex mechanism leading to CAZ-AVI resistance. The future design of novel β-lactams and β-lactamase inhibitors must consider the mechanistic basis of resistance of this and other threatening carbapenemases. IMPORTANCE Antibiotic resistance is emerging at unprecedented rates and threatens to reach crisis levels. One key mechanism of resistance is the breakdown of β-lactam antibiotics by β-lactamase enzymes. KPC-2 is a β-lactamase that inactivates carbapenems and β-lactamase inhibitors (e.g., clavulanate) and is prevalent around the world, including in the United States. Resistance to the new antibiotic ceftazidime-avibactam, which was designed to overcome KPC resistance, had already emerged within a year. Using protein engineering, we uncovered a mechanism by which resistance to this new drug emerges, which could arm scientists with the ability to forestall such resistance to future drugs. Copyright © 2017 Barnes et al.

A Pixel Correlation Technique for Smaller Telescopes to Measure Doubles

NASA Astrophysics Data System (ADS)

Wiley, E. O.

2013-04-01

Pixel correlation uses the same reduction techniques as speckle imaging but relies on autocorrelation among captured pixel hits rather than true speckles. A video camera operating at speeds (8-66 milliseconds) similar to lucky imaging to capture 400-1,000 video frames. The AVI files are converted to bitmap images and analyzed using the interferometric algorithms in REDUC using all frames. This results in a series of corellograms from which theta and rho can be measured. Results using a 20 cm (8") Dall-Kirkham working at f22.5 are presented for doubles with separations between 1" to 5.7" under average seeing conditions. I conclude that this form of visualizing and analyzing visual double stars is a viable alternative to lucky imaging that can be employed by telescopes that are too small in aperture to capture a sufficient number of speckles for true speckle interferometry.

Assessment of intracranial venous blood flow after subarachnoid hemorrhage: a new approach to diagnose vasospasm with transcranial color-coded duplex sonography.

PubMed

Connolly, Florian; Schreiber, Stephan J; Leithner, Christoph; Bohner, Georg; Vajkoczy, Peter; Valdueza, José M

2017-12-15

OBJECTIVE Transcranial color-coded duplex sonography (TCCS) is a reliable tool that is used to assess vasospasm in the M 1 segment of the middle cerebral artery (MCA) after subarachnoid hemorrhage (SAH). A distinct increase in blood flow velocity (BFV) is the principal criterion for vasospasm. The MCA/internal carotid artery (ICA) index (Lindegaard Index) is also widely used to distinguish between vasospasm and cerebral hyperperfusion. However, extracranial ultrasonography assessment of the neck vessels might be difficult in an intensive care unit. Therefore, the authors evaluated whether the relationship of intracranial arterial to venous BFV might indicate vasospasm with similar or even better accuracy. METHODS Patients who presented between 2008 and 2015 with aneurysmal SAH were prospectively enrolled in the study. Digital subtraction angiography (DSA) and TCCS were performed within 24 hours of each other to assess vasospasm 8-10 days after SAH. The following different TCCS parameters were analyzed to assess vasospasm in the MCA and were compared with the gold-standard DSA parameters: 1) mean time-averaged maximum BFV (V mean ) of the MCA, 2) peak systolic velocity (PSV) of the MCA, 3) the Lindegaard Index using V mean as well as PSV, and 4) a new arteriovenous index (AVI) between the MCA and the basal vein of Rosenthal using V mean and PSV. The best cutoff values for these parameters to distinguish vasospasm from normal perfusion or hyperperfusion were calculated using receiver operating characteristic curve analysis. Sensitivity, specificity, positive predictive value, and negative predictive value as well as the overall accuracy for each cutoff value were analyzed. RESULTS A total of 102 patients (mean age 52 ± 12 years) were evaluated. Bilateral MCA assessment by TCCS was successful in all patients. In 6 cases (3%), the BFV of the basal vein of Rosenthal could not be analyzed. The AVI could not be calculated in 50 of 204 cases (25%) because the insonation quality was very low in one of the ICAs. An AVI > 10 for V mean and an AVI > 12 for systolic velocity provided the highest accuracies of 87% and 86%, respectively. Regarding the Lindegaard Index, the accuracy was highest using a threshold of > 3 for the mean BFV (84%) as well as systolic BFV (80%). BFVs in the MCA of ≥ 120 cm/sec (V mean ) and ≥ 200 cm/sec (PSV) predicted vasospasm with accuracies of 84% and 83%, respectively. A combined analysis of the MCA BFV and the AVI led to a slight increase in specificity (V mean , 94%; PSV, 93%) and positive predictive value (V mean , 88%; PSV 86%) without further improvement in accuracy (V mean , 88%; PSV, 84%). CONCLUSIONS The intracranial AVI is a reliable parameter that can be used to assess vasospasm after SAH. Its reliability for differentiating vasospasm and hyperperfusion is slightly higher than that for the established Lindegaard Index, and this method has the additional advantage of a remarkably lower failure rate.

Converting laserdisc video to digital video: a demonstration project using brain animations.

PubMed

Jao, C S; Hier, D B; Brint, S U

1995-01-01

Interactive laserdiscs are of limited value in large group learning situations due to the expense of establishing multiple workstations. The authors implemented an alternative to laserdisc video by using indexed digital video combined with an expert system. High-quality video was captured from a laserdisc player and combined with waveform audio into an audio-video-interleave (AVI) file format in the Microsoft Video-for-Windows environment (Microsoft Corp., Seattle, WA). With the use of an expert system, a knowledge-based computer program provided random access to these indexed AVI files. The program can be played on any multimedia computer without the need for laserdiscs. This system offers a high level of interactive video without the overhead and cost of a laserdisc player.

A second prosthesis as a procedural rescue option in trans-apical aortic valve implantation.

PubMed

Kempfert, Jörg; Rastan, Ardawan J; Schuler, Gerhard; Linke, Axel; Holzhey, David; van Linden, Arnaud; Mohr, Friedrich-W; Walther, Thomas

2011-07-01

Trans-apical aortic valve implantation (TA-AVI) using the Edwards SAPIEN™ prosthesis has evolved to a routine procedure for selected high-risk elderly patients. In rare cases, misplacement of the SAPIEN™ valve (too low a position), dysfunction of the leaflets or perforation of the interventricular septum (ventricular septal defect, VSD) occurs and requires immediate implantation of a second prosthesis within the first one. Results of this 'bailout' maneuver have not been reported yet. Of 305 TA-AVI procedures, 15 patients required a second prosthesis due to dysfunctional leaflets (n = 6), low position (n = 7), or VSD (n = 2). Mean age was 82.5 ± 1.3 years, mean logistic EuroSCORE (European System for Cardiac Operative Risk Evaluation) was 45.5 ± 5.4, and Society of Thoracic Surgeons (STS) Score was 13.5 ± 1.5. All second SAPIEN™ valves could be implanted successfully within the first one. The second prosthesis solved leaflet dysfunction, sealed the VSD (lower position of the second prosthesis), or corrected the initial misplacement (higher position of the second prosthesis) in all patients. Within 30 days, four patients died (low cardiac output n = 3, all with preoperative ejection fraction (EF) <35%; intestinal ischemia n = 1). Intra-operative echocardiogram and angiogram revealed mild paravalvular leak in three and none/trace in 12 patients. Transvalvular gradients were low despite the implantation of the second valve (P(max)/mean 13.7 ± 4.3/6.4 ± 2.0). Placement of a second SAPIEN™ valve is a valuable 'bailout' technique in case of VSD, dysfunctional leaflets, or too low placement of the first prosthesis. The technique leads to an excellent functional result with low transvalvular gradients. The simple, straight, tubular stent design of the SAPIEN™ prosthesis may be the ideal design for such valve-in-valve procedures. Copyright © 2011 European Association for Cardio-Thoracic Surgery. Published by Elsevier B.V. All rights reserved.

Structures of the orthosomycin antibiotics avilamycin and evernimicin in complex with the bacterial 70S ribosome

PubMed Central

Arenz, Stefan; Graf, Michael; Nguyen, Fabian; Huter, Paul; Polikanov, Yury S.; Blanchard, Scott C.; Wilson, Daniel N.

2016-01-01

The ribosome is one of the major targets for therapeutic antibiotics; however, the rise in multidrug resistance is a growing threat to the utility of our current arsenal. The orthosomycin antibiotics evernimicin (EVN) and avilamycin (AVI) target the ribosome and do not display cross-resistance with any other classes of antibiotics, suggesting that they bind to a unique site on the ribosome and may therefore represent an avenue for development of new antimicrobial agents. Here we present cryo-EM structures of EVN and AVI in complex with the Escherichia coli ribosome at 3.6- to 3.9-Å resolution. The structures reveal that EVN and AVI bind to a single site on the large subunit that is distinct from other known antibiotic binding sites on the ribosome. Both antibiotics adopt an extended conformation spanning the minor grooves of helices 89 and 91 of the 23S rRNA and interacting with arginine residues of ribosomal protein L16. This binding site overlaps with the elbow region of A-site bound tRNA. Consistent with this finding, single-molecule FRET (smFRET) experiments show that both antibiotics interfere with late steps in the accommodation process, wherein aminoacyl-tRNA enters the peptidyltransferase center of the large ribosomal subunit. These data provide a structural and mechanistic rationale for how these antibiotics inhibit the elongation phase of protein synthesis. PMID:27330110

Error analysis regarding the calculation of nonlinear force-free field

NASA Astrophysics Data System (ADS)

Liu, S.; Zhang, H. Q.; Su, J. T.

2012-02-01

Magnetic field extrapolation is an alternative method to study chromospheric and coronal magnetic fields. In this paper, two semi-analytical solutions of force-free fields (Low and Lou in Astrophys. J. 352:343, 1990) have been used to study the errors of nonlinear force-free (NLFF) fields based on force-free factor α. Three NLFF fields are extrapolated by approximate vertical integration (AVI) Song et al. (Astrophys. J. 649:1084, 2006), boundary integral equation (BIE) Yan and Sakurai (Sol. Phys. 195:89, 2000) and optimization (Opt.) Wiegelmann (Sol. Phys. 219:87, 2004) methods. Compared with the first semi-analytical field, it is found that the mean values of absolute relative standard deviations (RSD) of α along field lines are about 0.96-1.19, 0.63-1.07 and 0.43-0.72 for AVI, BIE and Opt. fields, respectively. While for the second semi-analytical field, they are about 0.80-1.02, 0.67-1.34 and 0.33-0.55 for AVI, BIE and Opt. fields, respectively. As for the analytical field, the calculation error of <| RSD|> is about 0.1˜0.2. It is also found that RSD does not apparently depend on the length of field line. These provide the basic estimation on the deviation of extrapolated field obtained by proposed methods from the real force-free field.

Design and optimization of voice coil actuator for six degree of freedom active vibration isolation system using Halbach magnet array.

PubMed

Kim, MyeongHyeon; Kim, Hyunchang; Gweon, Dae-Gab

2012-10-01

This paper describes the design, modeling, optimization, and validation of an active vibration isolation system using a voice coil motor. The active vibration isolating method was constructed with a passive isolator and an active isolator. A spring was used for passive isolating; an actuator was used for active isolating. The proposed active vibration isolation system (AVIS) can isolate disturbances for many kinds of instruments. Until now, developed AVIS were able to isolate a six degree-of-freedom disturbance effectively. This paper proposes the realization of such a six degree-of-freedom active vibration isolation system that can work as a bench top device for precision measuring machines such as atomic force microscope, scanning probe microscope, etc.

Aviation Careers Series: Airline Non-Flying Careers

DOT National Transportation Integrated Search

1996-01-01

TRAVLINK demonstrated the use of Automatic Vehicle Location (AVL), ComputerAided dispatch (CAD), and Automatic Vehicle Identification (AVI) systems on Metropolitan Council Transit Operations (MCTO) buses in Minneapolis, Minnesota and western suburbs,...

Influence of Background Genome on Enzymatic Characteristics of Yellow (Ay/-, Avy/-) Mice

PubMed Central

Wolff, George L.; Pitot, Henry C.

1973-01-01

Identification of the fundamental polypeptide difference between yellow (Ay/-, Avy/-) and non-yellow mice is important for biomedical research because of the influence of the yellow genotype on normal and neoplastic growth and obesity. The complexity of the "yellow mouse syndrome" makes attainment of this objective dependent on the separation of those pleiotropic enzyme differences which are secondary, and depend on the background genome, from those which are primary, and depend primarily on the agouti locus genotype.—Four of nine hepatic enzyme activities assayed simultaneously differed between eight-week-old yellow (Ay/-, Avy/-) and non-yellow (A/-, a/a) male inbred and F1 hybrid mice. Among these four, only cytoplasmic malic enzyme activity was elevated in all yellow mice, as compared with the non-yellow sibs, regardless of background genome. Glucokinase, serine dehydratase, and tyrosine α-ketoglutarate transaminase activities were also changed in yellow mice, but these alterations depended on the background genome.—The ratio of malic enzyme activity to citrate-cleavage enzyme activity, possibly related to the altered fat metabolism of yellow mice, was influenced by background genome as well as by the yellow genotype.——Significant deviations of enzyme activities from mid-parent values among F1 hybrids were associated with particular background genomes; the number of such deviations was larger among yellow mice than among non-yellows and this difference was greater among C3H F1 hybrids than among C57BL/6 F1 hybrids. PMID:4405752

77 FR 28343 - Insurer Reporting Requirements; List of Insurers Required To File Reports

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-14

.... Each of the remaining five companies (including franchisees and licensees) listed in Appendix C are... Franchisees) Subject to the Reporting Requirements of Part 544 Avis Budget Group (subsidiary of Cendant...

46 CFR 12.15-3 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... practical demonstration of skills and abilities, of having achieved or maintained within the previous 5... first aid as set out in table A-VI/1-3 of the STCW Code. (4) Personal safety and social responsibilities...

Information Hiding In Digital Video Using DCT, DWT and CvT

NASA Astrophysics Data System (ADS)

Abed Shukur, Wisam; Najah Abdullah, Wathiq; Kareem Qurban, Luheb

2018-05-01

The type of video that used in this proposed hiding a secret information technique is .AVI; the proposed technique of a data hiding to embed a secret information into video frames by using Discrete Cosine Transform (DCT), Discrete Wavelet Transform (DWT) and Curvelet Transform (CvT). An individual pixel consists of three color components (RGB), the secret information is embedded in Red (R) color channel. On the receiver side, the secret information is extracted from received video. After extracting secret information, robustness of proposed hiding a secret information technique is measured and obtained by computing the degradation of the extracted secret information by comparing it with the original secret information via calculating the Normalized cross Correlation (NC). The experiments shows the error ratio of the proposed technique is (8%) while accuracy ratio is (92%) when the Curvelet Transform (CvT) is used, but compared with Discrete Wavelet Transform (DWT) and Discrete Cosine Transform (DCT), the error rates are 11% and 14% respectively, while the accuracy ratios are (89%) and (86%) respectively. So, the experiments shows the Poisson noise gives better results than other types of noises, while the speckle noise gives worst results compared with other types of noises. The proposed technique has been established by using MATLAB R2016a programming language.

Estimating spatial travel times using automatic vehicle identification data

DOT National Transportation Integrated Search

2001-01-01

Prepared ca. 2001. The paper describes an algorithm that was developed for estimating reliable and accurate average roadway link travel times using Automatic Vehicle Identification (AVI) data. The algorithm presented is unique in two aspects. First, ...

Introduction To ITS/CVO Participant Manual, Course 1

DOT National Transportation Integrated Search

1999-08-01

WEIGH-IN-MOTION OR WIM, COMMERCIAL VEHICLE INFORMATION SYSTEMS AND NETWORK OR CVISN, AUTOMATIC VEHICLE INDENTIFICATION OR AVI, AUTOMATIC VEHICLE LOCATION OR AVL, ELECTRONIC DATA INTERCHANGE OR EDI, GLOCAL POSITIONING SYSTEM OR GPS, INTERNET OR WORD W...

46 CFR 12.05-3 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... assessment of a practical demonstration of skills and abilities, of having achieved or maintained within the...) Elementary first aid as set out in table A-VI/1-3 of the STCW Code. (4) Personal safety and social...

Determination of the optimal atrioventricular interval in sick sinus syndrome during DDD pacing.

PubMed

Kato, Masaya; Dote, Keigo; Sasaki, Shota; Goto, Kenji; Takemoto, Hiroaki; Habara, Seiji; Hasegawa, Daiji; Matsuda, Osamu

2005-09-01

Although the AAI pacing mode has been shown to be electromechanically superior to the DDD pacing mode in sick sinus syndrome (SSS), there is evidence suggesting that during AAI pacing the presence of natural ventricular activation pattern is not enough for hemodynamic benefit to occur. Myocardial performance index (MPI) is a simply measurable Doppler-derived index of combined systolic and diastolic myocardial performance. The aim of this study was to investigate whether AAI pacing mode is electromechanically superior to the DDD mode in patients with SSS by using Doppler-derived MPI. Thirty-nine SSS patients with dual-chamber pacing devices were evaluated by using Doppler echocardiography in AAI mode and DDD mode. The optimal atrioventricular (AV) interval in DDD mode was determined and atrial stimulus-R interval was measured in AAI mode. The ratio of the atrial stimulus-R interval to the optimal AV interval was defined as relative AV interval (rAVI) and the ratio of MPI in AAI mode to that in DDD mode was defined as relative MPI (rMPI). The rMPI was significantly correlated with atrial stimulus-R interval and rAVI (r = 0.57, P = 0.0002, and r = 0.67, P < 0.0001, respectively). A cutoff point of 1.73 for rAVI provided optimum sensitivity and specificity for rMPI >1 based on the receiver operator curves. Even though the intrinsic AV conduction is moderately prolonged, some SSS patients with dual-chamber pacing devices benefit from the ventricular pacing with optimal AV interval. MPI is useful to determine the optimal pacing mode in acute experiment.

Roadway system assessment using bluetooth-based automatic vehicle identification travel time data.

DOT National Transportation Integrated Search

2012-12-01

This monograph is an exposition of several practice-ready methodologies for automatic vehicle identification (AVI) data collection : systems. This includes considerations in the physical setup of the collection system as well as the interpretation of...

Electronic Toll And Traffic Management Systems, National Cooperative Highway Research Program Synthesis

DOT National Transportation Integrated Search

1993-01-01

ELECTRONIC TOLL COLLECTION OR ETC AND TRAFFIC MANAGEMENT OR ETTM, AUTOMATIC VEHICLE IDENTIFICATION OR AVI : ELECTRONIC TOLL COLLECTION AND TRAFFIC MANAGEMENT (ETTM) SYSTEMS ARE NOT A FUTURISTIC DREAM, THEY ARE OPERATING OR ARE BEING TESTED TODAY I...

PCC Airfield Pavement Response During Thaw-Weakening Periods: A Field Study

DOT National Transportation Integrated Search

1996-05-01

This investigation is part of the Cold Regions Research and Engineering Laboratory's (CRREL) on-going characterization of pavement performance in seasonal frost areas. As part of the research, CRREL conducted several field studies for the Federal Avi...

46 CFR 12.05-3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... applicant must: (1) Be at least 18 years of age; (2) Pass the prescribed physical and medical examination in... § 12.01-3). (2) Fire prevention and fire-fighting as set out in table A-VI/1-2 of the STCW Code. (3...

46 CFR 12.05-3 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... applicant must: (1) Be at least 18 years of age; (2) Pass the prescribed physical and medical examination in... § 12.01-3). (2) Fire prevention and fire-fighting as set out in table A-VI/1-2 of the STCW Code. (3...

General Aviation Activity and Avionics Survey (Annual Summary Report - 1986 Data)

DOT National Transportation Integrated Search

1987-12-01

This report presents the results and description of the 1986 General Aviation Activity and Avionics Survey. The survey was conducted during 1987 by the FAA to obtain information on the activity and avionics of the United States registered general avi...

One-year multicentre outcomes of transapical aortic valve implantation using the SAPIEN XT™ valve: the PREVAIL transapical study.

PubMed

Walther, Thomas; Thielmann, Matthias; Kempfert, Joerg; Schroefel, Holger; Wimmer-Greinecker, Gerhard; Treede, Hendrik; Wahlers, Thorsten; Wendler, Olaf

2013-05-01

The study aimed to evaluate 1-year outcomes of the multicentre PREVAIL transapical (TA) study of TA-aortic valve implantation (AVI) in high-risk patients. From September 2009 to August 2010, a total of 150 patients, aged 81.6 ± 5.8 years, 40.7% female, were included at 12 European TA-AVI experienced sites. Patients received 23 (n = 36), 26 (n = 57) and 29 mm (n = 57) second-generation SAPIEN XT™ (Edwards Lifesciences, Irvine, CA, USA) valves. The mean logistic EuroSCORE was 24.3 ± 7.0, and mean Society Thoracic Surgeons score was 7.5 ± 4.4%. Survival was 91.3% at 30 days and 77.9% at 1 year. Subgroup analysis revealed survivals of 91.7/88.9, 86.0/70.2, 96.55/91.2% for patients receiving 23-, 26- and 29-mm valves at 30 days and at 1 year, respectively. Transthoracic echocardiography revealed preserved left ventricular ejection fraction and low gradients. Aortic incompetence was none in 41/48, trace 30/36, mild 22/12 and moderate in 7/4% at discharge and 1 year. Walking distance increased from 221 (postimplant) to 284 m (at 1 year, P = 0.0004). Three patients required reoperation due to increasing aortic incompetence during follow-up. Causes of mortality at 1 year were cardiac (n = 7), stroke (n = 1) and others (n = 5). The European PREVAIL multicentre trial demonstrates good functionality and good outcomes for TA-AVI using the second-generation SAPIEN XT prosthesis and the ASCENDRA-II delivery system. The 29-mm SAPIEN XT valve was successfully introduced and showed excellent results.

Vegetable Intake in College-Aged Adults Is Explained by Oral Sensory Phenotypes and TAS2R38 Genotype

PubMed Central

Hayes, John E.; Davidson, Andrew C.; Kidd, Judith R.; Kidd, Kenneth K.; Bartoshuk, Linda M.

2010-01-01

Taste and oral sensations vary in humans. Some of this variation has a genetic basis, and two commonly measured phenotypes are the bitterness of propylthiouracil (PROP) and the number of fungiform papillae on the anterior tongue. While the genetic control of fungiform papilla is unclear, PROP bitterness associates with allelic variation in the taste receptor gene, TAS2R38. The two common alleles are AVI and PAV (proline, alanine, valine, and isoleucine); AVI/AVI homozygotes taste PROP as less bitter than heterozygous or homozygous PAV carriers. In this laboratory-based study, we determined whether taste of a bitter probe (quinine) and vegetable intake varied by taste phenotypes and TAS2R38 genotype in healthy adults (mean age=26 years). Vegetable intake was assessed via two validated, complementary methods: food records (Food Pyramid servings standardized to energy intake) and food frequency questionnaire (general intake question and composite vegetable groups). Quinine bitterness varied with phenotypes but not TAS2R38; quinine was more bitter to those who tasted PROP as more bitter or had more papillae. Nontasters by phenotype or genotype reported greater consumption of vegetables, regardless of type (i.e., the effect generalized to all vegetables and was not restricted to those typically thought of as being bitter). Furthermore, nontasters with more papillae reported greater vegetable consumption than nontasters with fewer papillae, suggesting that when bitterness does not predominate, more papillae enhance vegetable liking. These findings suggest that genetic variation in taste, measured by multiple phenotypes or TAS2R38 genotype, can explain differences in overall consumption of vegetables, and this was not restricted to vegetables that are predominantly bitter. PMID:21157576

National Research and Development Plan for Aviation Safety, Security, Efficiency and Environmental Compatibility.

DOT National Transportation Integrated Search

1999-11-01

This plan describes coordinated long-term research initiatives to bring about advances in aviation that will be required in the opening decades of the next century. The White House Commission on Aviation Safety and Security and the National Civil Avi...

78 FR 48043 - Safety Zone; AVI Resort and Casino Labor Day Fireworks Display; Colorado River

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-07

... the Local Notice to Mariners and local advertising by the event sponsor. If the Captain of the Port... need not be enforced for the full duration stated on this notice, he or she may use a Broadcast Notice...

Sonic Boom.

ERIC Educational Resources Information Center

Hurtig, Brent

1998-01-01

Reviews and evaluates Pro Tools 4.1, a multitrack digital audio workstation (DAWs) that imports and synchronizes to QuickTime or AVI digital movies. Audio-for-picture editors lock their digital audio workstations to linear videotape recorders, using complex, expensive time code synchronizers. Highlights Macintosh and Windows based alternatives.…

National Research and Development Plan For Aviation Safety, Security, Efficiency, and Environmental Compatibility

DOT National Transportation Integrated Search

1999-11-01

This plan describes coordinated long-term research initiatives to bring about advances in aviation that will be required in the opening decades of the next century. The White House Commission on Aviation Safety and Security and the National Civil Avi...

Ancient horizontal transfers of retrotransposons between birds and ancestors of human pathogenic nematodes

PubMed Central

Suh, Alexander; Witt, Christopher C.; Menger, Juliana; Sadanandan, Keren R.; Podsiadlowski, Lars; Gerth, Michael; Weigert, Anne; McGuire, Jimmy A.; Mudge, Joann; Edwards, Scott V.; Rheindt, Frank E.

2016-01-01

Parasite host switches may trigger disease emergence, but prehistoric host ranges are often unknowable. Lymphatic filariasis and loiasis are major human diseases caused by the insect-borne filarial nematodes Brugia, Wuchereria and Loa. Here we show that the genomes of these nematodes and seven tropical bird lineages exclusively share a novel retrotransposon, AviRTE, resulting from horizontal transfer (HT). AviRTE subfamilies exhibit 83–99% nucleotide identity between genomes, and their phylogenetic distribution, paleobiogeography and invasion times suggest that HTs involved filarial nematodes. The HTs between bird and nematode genomes took place in two pantropical waves, >25–22 million years ago (Myr ago) involving the Brugia/Wuchereria lineage and >20–17 Myr ago involving the Loa lineage. Contrary to the expectation from the mammal-dominated host range of filarial nematodes, we hypothesize that these major human pathogens may have independently evolved from bird endoparasites that formerly infected the global breadth of avian biodiversity. PMID:27097561

Crescent Evaluation : appendix F : state-line beacon project : user case studies

DOT National Transportation Integrated Search

1994-02-01

The essence of the AVI "Beacon" concept as it applies to the HELP organization would be to provide location, date, and tune information from the roadside to the on-board computer (OBC). A roadside transmit beacon would be located on the state lines a...

Analyse experimentale des performances d'une batterie au lithium pour l'aeronautique

NASA Astrophysics Data System (ADS)

Bonnin, Romain

Ce memoire a pour objectif d'identifier et d'etudier les performances necessaires pour qu'une batterie au lithium puisse etre utilisee dans le secteur de l'aeronautique. C'est pourquoi dans le cadre de notre recherche, nous allons proposer une procedure de tests permettant d'analyser et de determiner si la batterie au lithium peut etre implantee dans un avion. En vue de repondre a l'analyse des performances, une etude des fonctionnalites demandees par l'avion ainsi que des normes preexistantes vont etre effectuees. Suite a cette etape, nous allons elaborer un banc d'essais. Une fois le banc d'essais acheve, nous allons tester une batterie au lithium qui est supposee disposer de toutes les caracteristiques techniques requises pour etre implantee dans un avion. Ces tests nous permettront donc d'emettre un avis sur l'utilisation des batteries au lithium dans le domaine de l'aeronautique.

Analysis of Low Frequency Ground Motions Induced by Near-Surface and Atmospheric Explosions.

DTIC Science & Technology

1982-08-01

Library S-CUBED ATTN: J. Murphy Institute for Defense Analyses ATTN: Classified Library Science Applications, Inc ATTN: Technical Library Kaman...AviDyne ATTN: Library Science Applications, Inc ATTN: N. Hobbs ATTN: D. Maxwell ATTN: D. Bernstein Kaman Sciences Corp ATTN: Library Science Applications

The Future of American Defense Policy

DTIC Science & Technology

2017-10-01

16-44. Sharma, Avi. "Who Leads in a G-Zero World? Multi-Nationals, Sustainable Development, and Corporate Social Responsibility in a Changing...Policies in the U.S. & Western Europe." Public Finance & Management 7, no. 3(September 2007): 295-339. Tiltiņš, Alekss and Baiba Šavriņa. "Alternative

Report on Project Action Sheet PP05 task 3 between the U.S. Department of Energy and the Republic of Korea Ministry of Education, Science, and Technology (MEST).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snell, Mark Kamerer

2013-01-01

This report documents the results of Task 3 of Project Action Sheet PP05 between the United States Department of Energy (DOE) and the Republic of Korea (ROK) Ministry of Education, Science, and Technology (MEST) for Support with Review of an ROK Risk Evaluation Process. This task was to have Sandia National Laboratories collaborate with the Korea Institute of Nuclear Nonproliferation and Control (KINAC) on several activities concerning how to determine the Probability of Neutralization, PN, and the Probability of System Effectiveness, PE, to include: providing descriptions on how combat simulations are used to determine PN and PE; comparisons of themore » strengths and weaknesses of two neutralization models (the Neutralization.xls spreadsheet model versus the Brief Adversary Threat-Loss Estimator (BATLE) software); and demonstrating how computer simulations can be used to determine PN. Note that the computer simulation used for the demonstration was the Scenario Toolkit And Generation Environment (STAGE) simulation, which is a stand-alone synthetic tactical simulation sold by Presagis Canada Incorporated. The demonstration is provided in a separate Audio Video Interleave (.AVI) file.« less

Advanced Visual and Instruction Systems for Maintenance Support (AVIS-MS)

DTIC Science & Technology

2006-12-01

Hayashi , "Augmentable Reality: Situated Communication through Physical and Digital Spaces," Proc. 2nd Int’l Symp. Wearable Computers, IEEE CS Press...H. Ohno , "An Optical See-through Display for Mutual Occlusion of Real and Virtual Environments," Proc. Int’l Symp. Augmented Reality 2000 (ISARO0

Cotton 2K-Management tools for irrigated cotton

USDA-ARS?s Scientific Manuscript database

The use of simulation models to manage crops was a concept introduced in the 1980’s. For example, the cotton simulation model known as GOSSYM was made available in 1989 and was used by both producers and consultants to manage cotton in real time. More recently, Dr. Avi Marani, Professor Emeritus, Sc...

An obesity-dependent lactation defect in the viable yellow agouti mouse is associated with mammary inflammation

USDA-ARS?s Scientific Manuscript database

Maternal obesity is known to delay lactogenesis in breast-feeding women, as well as negatively impact lactation in other species. Obesity is also understood to be associated with inflammation. Work with the viable yellow agouti (Avy) mouse in our laboratory has documented a lactation defect in obese...

30 CFR 950.15 - Approval of Wyoming regulatory program amendments.

Code of Federal Regulations, 2010 CFR

2010-07-01

...), (ba), 3(b)(i); Ch II, §§ 3(a)(vi)(E), (M), (b)(xvi)(D), (xx), (v)(C); Ch IV, §§ 3(d)(vii), (e)(i)(H..., 2009 Chapter 11, Section 2(a)(vii)(A). [62 FR 9958, Mar. 5, 1997, as amended at 64 FR 53208, Oct. 1...

F-35 Force Development Evaluation and Weapons School Beddown Environmental Impact Statement

DTIC Science & Technology

2011-05-01

deficiencias encontradas después del despliegue del sistema; ♦ explora medios no materiales (por ejemplo, tácticas) para satisfacer requisitos...del adecuado desempeño del avión en combate al proporcionar entrenamiento, información sobre las capacidades operativas y nuevos requisitos. Además

26 CFR 1.1361-1 - S corporation defined.

Code of Federal Regulations, 2010 CFR

2010-04-01

... section 1361(c)(2)(A)(vi), the individual for whose benefit the trust was created shall be treated as the... it, each beneficiary who is a member of the family; (D) The individual for whose benefit a trust... individual for whose benefit the trust was created shall be treated as the shareholder. (ii) Exceptions. See...

46 CFR 11.202 - STCW endorsements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 7SR, England, telephone: + 44 (0)20 7735 7611, http://www.imo.org. (3) Each candidate presenting a... original MMC is issued, renewed, upgraded, or otherwise modified, the OCMI will determine whether the... (incorporated by reference, see § 11.102). (3) Elementary first aid as set out in table A-VI/1-3 of the STCW...

Independent Media, Youth Agency, and the Promise of Media Education

ERIC Educational Resources Information Center

Poyntz, Stuart R.

2006-01-01

Through a discussion of two videos--The Take (Naomi Klein & Avi Lewis, 2004), and a student project--I argue that media education can further the role of youth as critically engaged, democratic citizens most effectively when educators develop students' capacity for reflection and self-expression through engagement with those power structures that…

Avis de l’ANSES/Rapport d’expertise collective: Analyse de risque phytosanitaire express Halyomorpha halys – la punaise diabolique

USDA-ARS?s Scientific Manuscript database

[translation: ANSES Phytosanitary Expert Pest Risk Assessment for Halyomorpha halys, the brown marmorated stink bug, in France] Halyomorpha halys is now present in France in Alsace and in several neighboring countries (Switzerland and Italy). The potential risk of invasion of H. halys throughout Fr...

Visual rehabilitation: visual scanning, multisensory stimulation and vision restoration trainings

PubMed Central

Dundon, Neil M.; Bertini, Caterina; Làdavas, Elisabetta; Sabel, Bernhard A.; Gall, Carolin

2015-01-01

Neuropsychological training methods of visual rehabilitation for homonymous vision loss caused by postchiasmatic damage fall into two fundamental paradigms: “compensation” and “restoration”. Existing methods can be classified into three groups: Visual Scanning Training (VST), Audio-Visual Scanning Training (AViST) and Vision Restoration Training (VRT). VST and AViST aim at compensating vision loss by training eye scanning movements, whereas VRT aims at improving lost vision by activating residual visual functions by training light detection and discrimination of visual stimuli. This review discusses the rationale underlying these paradigms and summarizes the available evidence with respect to treatment efficacy. The issues raised in our review should help guide clinical care and stimulate new ideas for future research uncovering the underlying neural correlates of the different treatment paradigms. We propose that both local “within-system” interactions (i.e., relying on plasticity within peri-lesional spared tissue) and changes in more global “between-system” networks (i.e., recruiting alternative visual pathways) contribute to both vision restoration and compensatory rehabilitation, which ultimately have implications for the rehabilitation of cognitive functions. PMID:26283935

Flavones modulate respiratory epithelial innate immunity: Anti-inflammatory effects and activation of the T2R14 receptor

PubMed Central

Hariri, Benjamin M.; McMahon, Derek B.; Chen, Bei; Freund, Jenna R.; Mansfield, Corrine J.; Doghramji, Laurel J.; Adappa, Nithin D.; Palmer, James N.; Kennedy, David W.; Reed, Danielle R.; Jiang, Peihua

2017-01-01

Chronic rhinosinusitis has a significant impact on patient quality of life, creates billions of dollars of annual healthcare costs, and accounts for ∼20% of adult antibiotic prescriptions in the United States. Because of the rise of resistant microorganisms, there is a critical need to better understand how to stimulate and/or enhance innate immune responses as a therapeutic modality to treat respiratory infections. We recently identified bitter taste receptors (taste family type 2 receptors, or T2Rs) as important regulators of sinonasal immune responses and potentially important therapeutic targets. Here, we examined the immunomodulatory potential of flavones, a class of flavonoids previously demonstrated to have antibacterial and anti-inflammatory effects. Some flavones are also T2R agonists. We found that several flavones inhibit Muc5AC and inducible NOS up-regulation as well as cytokine release in primary and cultured airway cells in response to several inflammatory stimuli. This occurs at least partly through inhibition of protein kinase C and receptor tyrosine kinase activity. We also demonstrate that sinonasal ciliated epithelial cells express T2R14, which closely co-localizes (<7 nm) with the T2R38 isoform. Heterologously expressed T2R14 responds to multiple flavones. These flavones also activate T2R14-driven calcium signals in primary cells that activate nitric oxide production to increase ciliary beating and mucociliary clearance. TAS2R38 polymorphisms encode functional (PAV: proline, alanine, and valine at positions 49, 262, and 296, respectively) or non-functional (AVI: alanine, valine, isoleucine at positions 49, 262, and 296, respectively) T2R38. Our data demonstrate that T2R14 in sinonasal cilia is a potential therapeutic target for upper respiratory infections and that flavones may have clinical potential as topical therapeutics, particularly in T2R38 AVI/AVI individuals. PMID:28373278

Variability of oxygen radical absorbance capacity (ORAC) in different animal species.

PubMed

Ninfali, P; Aluigi, G

1998-11-01

The oxygen radical absorbance capacity (ORAC) was measured both in whole (ORAC-T) and deproteinized (ORAC-AS) plasma samples of human, pig, cow, rabbit, dog, cat, sheep, horse, dolphin, turkey, guinea-hen and chicken. In the 12 species, ORAC-T data, expressed as micromoles of peroxyl radicals trapped by 11 of sample, were found scattered between 8,600 and 23,000 micromol/l. The species with the highest ORAC-T values were cat among mammals and chicken among avies. ORAC-AS values ranged between 600 and 2000 micromol/l, with the highest values found in dolphin and sheep among mammals, while chicken was first among avies. In the 12 species, the relative contribution of ORAC-AS in relation to ORAC-T ranged from 5% to 20%. Protein SH-groups and uric acid were measured in plasma of all species, but no significant correlation was found between thiols and ORAC-T values or between uric acid and ORAC-AS values. Our results show that: (1) the ORAC method is reproducible and sensitive enough to be used in the comparison of the peroxyl-radical absorbance capacity of protein and non-protein plasma components in different animal species; (2) both in mammals and in avies, there is a deep intra-class heterogeneity of ORAC-T and ORAC-AS values; (3) by considering most species, plasma proteins and lipoproteins account for about 85-90% of the overall peroxyl-radical trapping capacity. In the dolphin only, the protein contribution decreases to 80%; (4) uric acid accounts for about one-half of the ORAC-AS value in human, guinea-hen and for about one-third in chicken, while it provides a very limited contribution in other species. We conclude that species with the highest ORAC-T, like cat and chicken, or with the highest ORAC-AS, like dolphin, are interesting models to study the reasons of such a marked antioxidant defense in the plasma.

When Teachers Must Let Education Hurt: Rousseau and Nietzsche on Compassion and the Educational Value of Suffering

ERIC Educational Resources Information Center

Jonas, Mark E.

2010-01-01

Avi Mintz (2008) has recently argued that Anglo-American educators have a tendency to alleviate student suffering in the classroom. According to Mintz, this tendency can be detrimental because certain kinds of suffering actually enhance student learning. While Mintz compellingly describes the effects of educator's desires to alleviate suffering in…

46 CFR 12.15-3 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... years the minimum standards of competence for the following 4 areas of basic safety: (1) Personal... first aid as set out in table A-VI/1-3 of the STCW Code. (4) Personal safety and social responsibilities... of competence set out in STCW Regulation III/4 and Section A-III/4 of the STCW Code (incorporated by...

75 FR 20799 - Safety Zone; AVI July Fireworks Display, Laughlin, NV

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-21

..., West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC 20590-0001. Hand...-0019'' in the ``Keyword'' box. Click ``Search'' then click on the balloon shape in the ``Actions... ``Actions'' column. You may also visit the Docket Management Facility in Room W12-140 on the ground floor of...

What We Talk about When We Don't Talk about Grades

ERIC Educational Resources Information Center

O'Connor, John S.; Lessing, Avi D.

2017-01-01

In this article, John O'Connor and Avi Lessing discuss their decision to create gradeless classrooms. They reached this decision by witnessing the profound cost grades hold for students and teachers alike. Grades threaten to reduce students to mere scores and teachers to bookkeepers, both groups focused more on grades than learning. By eliminating…

Maternal obesity in the agouti viable yellow (Avy) mouse produces defective secretory activation that is associated with mammary inflammation and activation of adrenocorticosteroid-dependent gene expression

USDA-ARS?s Scientific Manuscript database

Maternal obesity is known to interfere with normal lactation in women, rodents, and dairy animals. Obesity is also correlated with profound changes in an array of endocrine factors and is causally linked with inflammation and insulin resistance. Recent work suggests that elevated aldosterone actin...

Factors Influencing Health Care Access in Rural Health Professional Shortage Areas

DTIC Science & Technology

1992-08-01

CRA&I DTIC TAB1 9 UnannouncedS~~Just f~jpn_ ..__" l• By Distribution /93- 04772 Avi adom a..,.Availability Codes Avail and orDist Special •~-0 1S𔄃...profession. Large group and staff-model Health Maintenance Rural Health 16 Organizations [HMOs) usually provide care at primary HMO sites ald employ NPs

Time to Dream: "Reflections on Paul Diederich and the Progressive American High School"

ERIC Educational Resources Information Center

O'Connor, John S.; Lessing, Avi D.

2015-01-01

In this essay, John S. O'Connor and Avi D. Lessing discuss the increasingly reductive and routinized nature of contemporary schools and the costs such an approach holds for students and teachers alike. The current approach is especially troublesome in light of the rich history of progressive voices, such as Paul Diederich, who have cautioned…

Value recovery from two mechanized bucking operations in the southeastern United States

Treesearch

Kevin Boston; Glen. Murphy

2003-01-01

The value recovered from two mechanized bucking operations in the southeastern United States was compared with the optimal value computed using an individual-stem log optimization program, AVIS. The first operation recovered 94% of the optimal value. The main cause for the value loss was a failure to capture potential sawlog volume; logs were bucked to a larger average...

Diversity, abundance, and host relationships of avian malaria and related haemosporidians in New Mexico pine forests.

PubMed

Marroquin-Flores, Rosario A; Williamson, Jessie L; Chavez, Andrea N; Bauernfeind, Selina M; Baumann, Matthew J; Gadek, Chauncey R; Johnson, Andrew B; McCullough, Jenna M; Witt, Christopher C; Barrow, Lisa N

2017-01-01

Avian malaria and related haemosporidian parasites (genera Haemoproteus , Plasmodium , and Leucocytozoon ) affect bird demography, species range limits, and community structure, yet they remain unsurveyed in most bird communities and populations. We conducted a community-level survey of these vector-transmitted parasites in New Mexico, USA, to describe their diversity, abundance, and host associations. We focused on the breeding-bird community in the transition zone between piñon-juniper woodland and ponderosa pine forests (elevational range: 2,150-2,460 m). We screened 186 birds representing 49 species using both standard PCR and microscopy techniques to detect infections of all three avian haemosporidian genera. We detected infections in 68 out of 186 birds (36.6%), the highest proportion of which were infected with Haemoproteus (20.9%), followed by Leucocytozoon (13.4%), then Plasmodium (8.0%). We sequenced mtDNA for 77 infections representing 43 haplotypes (25 Haemoproteus , 12 Leucocytozoon , 6 Plasmodium ). When compared to all previously known haplotypes in the MalAvi and GenBank databases, 63% (27) of the haplotypes we recovered were novel. We found evidence for host specificity at the avian clade and species level, but this specificity was variable among parasite genera, in that Haemoproteus and Leucocytozoon were each restricted to three avian groups (out of six), while Plasmodium occurred in all groups except non-passerines. We found striking variation in infection rate among host species, with nearly universal infection among vireos and no infection among nuthatches. Using rarefaction and extrapolation, we estimated the total avian haemosporidian diversity to be 70 haplotypes (95% CI [43-98]); thus, we may have already sampled ∼60% of the diversity of avian haemosporidians in New Mexico pine forests. It is possible that future studies will find higher diversity in microhabitats or host species that are under-sampled or unsampled in the present study. Fortunately, this study is fully extendable via voucher specimens, frozen tissues, blood smears, parasite images, and documentation provided in open-access databases (MalAvi, GenBank, and ARCTOS).

Diversity, abundance, and host relationships of avian malaria and related haemosporidians in New Mexico pine forests

PubMed Central

Marroquin-Flores, Rosario A.; Williamson, Jessie L.; Chavez, Andrea N.; Bauernfeind, Selina M.; Baumann, Matthew J.; Gadek, Chauncey R.; Johnson, Andrew B.; McCullough, Jenna M.

2017-01-01

Avian malaria and related haemosporidian parasites (genera Haemoproteus, Plasmodium, and Leucocytozoon) affect bird demography, species range limits, and community structure, yet they remain unsurveyed in most bird communities and populations. We conducted a community-level survey of these vector-transmitted parasites in New Mexico, USA, to describe their diversity, abundance, and host associations. We focused on the breeding-bird community in the transition zone between piñon-juniper woodland and ponderosa pine forests (elevational range: 2,150–2,460 m). We screened 186 birds representing 49 species using both standard PCR and microscopy techniques to detect infections of all three avian haemosporidian genera. We detected infections in 68 out of 186 birds (36.6%), the highest proportion of which were infected with Haemoproteus (20.9%), followed by Leucocytozoon (13.4%), then Plasmodium (8.0%). We sequenced mtDNA for 77 infections representing 43 haplotypes (25 Haemoproteus, 12 Leucocytozoon, 6 Plasmodium). When compared to all previously known haplotypes in the MalAvi and GenBank databases, 63% (27) of the haplotypes we recovered were novel. We found evidence for host specificity at the avian clade and species level, but this specificity was variable among parasite genera, in that Haemoproteus and Leucocytozoon were each restricted to three avian groups (out of six), while Plasmodium occurred in all groups except non-passerines. We found striking variation in infection rate among host species, with nearly universal infection among vireos and no infection among nuthatches. Using rarefaction and extrapolation, we estimated the total avian haemosporidian diversity to be 70 haplotypes (95% CI [43–98]); thus, we may have already sampled ∼60% of the diversity of avian haemosporidians in New Mexico pine forests. It is possible that future studies will find higher diversity in microhabitats or host species that are under-sampled or unsampled in the present study. Fortunately, this study is fully extendable via voucher specimens, frozen tissues, blood smears, parasite images, and documentation provided in open-access databases (MalAvi, GenBank, and ARCTOS). PMID:28828279

Budget Scoring of Alternative Financing Methods for Defense Requirements

DTIC Science & Technology

2007-06-01

28 Table 3. Public vs . Private Operating Lease Determination ..........................................32 xii...asset to another party (lessee). For example, the rental of an automobile from Avis implies no ownership . However, leases can be structured in an... Ownership of the asset remains with the lessor during the term of the lease and is not transferred to the Government at or shortly after the end of

Fiches pratiques: Les comparatifs lavent plus blanc; Signe particulier: Belier; Avis de recherche; Mont de piete (Comparatively Speaking; The Sign of Aries; Missing Persons; Pawnshop).

ERIC Educational Resources Information Center

Bourdet, Jean-Francois; And Others

1992-01-01

Four activities for the French language classroom are described. These include helping students discover comparative expressions by using advertisements; using horoscopes for teaching vocabulary; using a missing persons report as a source for intermediate to advanced level discussion, collective writing, and questions; and a video designed to…

76 FR 33392 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Notice of Filing and Immediate Effectiveness...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-08

... received on the proposed rule change. The text of these statements may be examined at the places specified... SWPC routing strategy to Rule 11.9(b)(3)(q). \\4\\ See SR-EDGX-2011-15 (May 5, 2011). SWPC is a routing... strategies set forth in NASDAQ Rule 4758(a)(1)(A)(vi) (``NASDAQ's ``MOPP'' strategy) and BATS BZX/BYX...

XML-based scripting of multimodality image presentations in multidisciplinary clinical conferences

NASA Astrophysics Data System (ADS)

Ratib, Osman M.; Allada, Vivekanand; Dahlbom, Magdalena; Marcus, Phillip; Fine, Ian; Lapstra, Lorelle

2002-05-01

We developed a multi-modality image presentation software for display and analysis of images and related data from different imaging modalities. The software is part of a cardiac image review and presentation platform that supports integration of digital images and data from digital and analog media such as videotapes, analog x-ray films and 35 mm cine films. The software supports standard DICOM image files as well as AVI and PDF data formats. The system is integrated in a digital conferencing room that includes projections of digital and analog sources, remote videoconferencing capabilities, and an electronic whiteboard. The goal of this pilot project is to: 1) develop a new paradigm for image and data management for presentation in a clinically meaningful sequence adapted to case-specific scenarios, 2) design and implement a multi-modality review and conferencing workstation using component technology and customizable 'plug-in' architecture to support complex review and diagnostic tasks applicable to all cardiac imaging modalities and 3) develop an XML-based scripting model of image and data presentation for clinical review and decision making during routine clinical tasks and multidisciplinary clinical conferences.

77 FR 10581 - Self-Regulatory Organizations; New York Stock Exchange LLC; Notice of Filing and Immediate...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... quantity as close to zero as possible. The Exchange proposes to amend Rule 123C(4)(a)(vi) to add that LOC... ``plus'' or ``zero plus'' tick, and is not lower than the last sale plus the minimal fractional change in the stock if the last sale was a ``minus'' or ``zero minus'' tick. The purpose of a Sell Plus order is...

Towards Long-Time Simulation of Soft Tissue Simulant Penetration

DTIC Science & Technology

2008-12-01

materials involved in testing. Experiments, for instance firing high speed bullets at steel plates of different thicknesses (see [2]), reveal large...L’ shaped beam against a rigid wall using AVI and the almost exact en- ergy conservation of the system . With traditional time integrators, the time...and avoiding ill-conditioning issues is often non trivial. Likewise, Lagrange multipliers have also been used to impose the contact con- straint at

Emerging Targets and Novel Approaches to Ebola Virus Prophylaxis and Treatment

PubMed Central

Choi, Jin Huk; Croyle, Maria A.

2013-01-01

Ebola is a highly virulent pathogen causing severe hemorrhagic fever with a high case fatality rate in humans and non-human primates (NHPs). Although safe and effective vaccines or other medicinal agents to block Ebola infection are currently unavailable, a significant effort has been put forth to identify several promising candidates for the treatment and prevention of Ebola hemorrhagic fever. Among these, recombinant-virus based vectors have been identified as potent vaccine candidates with some affording both pre- and post-exposure protection from the virus. Recently, Investigational New Drug (IND) applications have been approved by the United States (U.S.) Food and Drug Administration (FDA) and Phase I clinical trials initiated for two small molecule therapeutics, 1) anti-sense phosphorodiamidate morphino oligomers (PMOs: AVI-6002, AVI-6003), and 2) lipid-nanoparticle/small interfering RNA (LNP/siRNA: TKM-Ebola). These potential alternatives to vector-based vaccines require multiple doses to achieve therapeutic efficacy which is not ideal with regard to patient compliance and outbreak scenarios. These concerns have fueled a quest for even better vaccination and treatment strategies. Here, we summarize recent advances in vaccines or post-exposure therapeutics for prevention of Ebola hemorrhagic fever. The utility of novel pharmaceutical approaches to refine and overcome barriers associated with the most promising therapeutic platforms will also be discussed. PMID:23813435

Linguistic experience and audio-visual perception of non-native fricatives.

PubMed

Wang, Yue; Behne, Dawn M; Jiang, Haisheng

2008-09-01

This study examined the effects of linguistic experience on audio-visual (AV) perception of non-native (L2) speech. Canadian English natives and Mandarin Chinese natives differing in degree of English exposure [long and short length of residence (LOR) in Canada] were presented with English fricatives of three visually distinct places of articulation: interdentals nonexistent in Mandarin and labiodentals and alveolars common in both languages. Stimuli were presented in quiet and in a cafe-noise background in four ways: audio only (A), visual only (V), congruent AV (AVc), and incongruent AV (AVi). Identification results showed that overall performance was better in the AVc than in the A or V condition and better in quiet than in cafe noise. While the Mandarin long LOR group approximated the native English patterns, the short LOR group showed poorer interdental identification, more reliance on visual information, and greater AV-fusion with the AVi materials, indicating the failure of L2 visual speech category formation with the short LOR non-natives and the positive effects of linguistic experience with the long LOR non-natives. These results point to an integrated network in AV speech processing as a function of linguistic background and provide evidence to extend auditory-based L2 speech learning theories to the visual domain.

Parasite Prevalence Corresponds to Host Life History in a Diverse Assemblage of Afrotropical Birds and Haemosporidian Parasites

PubMed Central

Lutz, Holly L.; Hochachka, Wesley M.; Engel, Joshua I.; Bell, Jeffrey A.; Tkach, Vasyl V.; Bates, John M.; Hackett, Shannon J.; Weckstein, Jason D.

2015-01-01

Avian host life history traits have been hypothesized to predict rates of infection by haemosporidian parasites. Using molecular techniques, we tested this hypothesis for parasites from three haemosporidian genera (Plasmodium, Haemoproteus, and Leucocytozoon) collected from a diverse sampling of birds in northern Malawi. We found that host life history traits were significantly associated with parasitism rates by all three parasite genera. Nest type and nest location predicted infection probability for all three parasite genera, whereas flocking behavior is an important predictor of Plasmodium and Haemoproteus infection and habitat is an important predictor of Leucocytozoon infection. Parasite prevalence was 79.1% across all individuals sampled, higher than that reported for comparable studies from any other region of the world. Parasite diversity was also exceptionally high, with 248 parasite cytochrome b lineages identified from 152 host species. A large proportion of Plasmodium, Haemoproteus, and Leucocytozoon parasite DNA sequences identified in this study represent new, previously undocumented lineages (n = 201; 81% of total identified) based on BLAST queries against the avian malaria database, MalAvi. PMID:25853491

Aviso: altimetry products and services in 2013

NASA Astrophysics Data System (ADS)

Rosmorduc, Vinca; Bronner, Emilie; Maheu, Caroline; Mertz, Françoise

2013-04-01

Since the launch of Topex/Poseidon, more than 20 years ago, satellite altimetry has evolved in parallel with the user community and oceanography. As a result of this evolution, we now have: - A bigger choice of products, more and more easy-to-use, spanning complete GDRs to pre-computed sea level anomalies and gridded datasets and indicators such as MSL index or ENSO index. - a mature approach, combining altimetric data from various satellites and merging data acquired using different observation techniques, including altimetry, to give us a global view of the ocean; - data available in real or near-real time for operational use. Different services are available either to choose between the various datasets, or to download, extract or even visualize the data. An Ipad-Iphone application, AvisOcean has also been opened in September 2012, for information about the data and their updates. 2013 will see major changes in Aviso data distribution, both in data products themselves and in their distribution, including an online extraction tool in preparation (Online Data Extraction Service). An overview of available products & services, how to access them today, will be presented.

Le programme de sciences de la nature. Avis a la ministre de l'enseignement superieur et de la science (The Natural Sciences Program. Advisory to the Minister of Higher Education and Science).

ERIC Educational Resources Information Center

Conseil des Colleges, Quebec (Quebec).

A series of recommendations developed by the Council of Colleges of the Colleges of General and Professional Education (CEGEP) in Quebec (Canada) are presented in this report to the Ministry of Higher Education and Science for redesigning the CEGEP's natural sciences curriculum. The proposed reforms are designed to meet legislative requirements…

30 CFR 950.15 - Approval of Wyoming regulatory program amendments.

Code of Federal Regulations, 2011 CFR

2011-07-01

...), (ba), 3(b)(i); Ch II, §§ 3(a)(vi)(E), (M), (b)(xvi)(D), (xx), (v)(C); Ch IV, §§ 3(d)(vii), (e)(i)(H...(am);Chap. 1, Section 2(ao); Chap. 1, Section 2(ap); Chap. 1, Section 2(as); Chap. 1, Section 2(az... relocated rules. [62 FR 9958, Mar. 5, 1997, as amended at 64 FR 53208, Oct. 1, 1999; 67 FR 67547, Nov. 6...

Expandable Shelter/Container Report.

DTIC Science & Technology

1973-06-01

transportability , offers limited work space, and because it requIres a ded i cated tractor, imposes an additiona l maintenance and logistica l burden on...Porta bl e, Avi ation Maintenance (SPNI) studied the requirements of transportability and f l oor space, and also consi dered costs I nvolved In...shop configuration of the ES/C , w hi ch was the only configurat ion that MASSTER was tasked to evaluate, prov i des adequate space for the

RDT&E/Acquisition Management Guide. Revision.

DTIC Science & Technology

1987-01-01

libraries s , that rIaincd librai staff comprehensive, coordinated Scientif k, and lekh- ca.n assist RI)!& pets n~rnc, I e ri nical Information Program ( S ...A179 010 RDTAE/ACOUISITIOi MNAGEMENT GUIDE REVISIOI(U) 1/ N S --5-RDEPARTMENT OF THE AVY WASHINGTON DC JAN 87 UNCLASSIFIED F/ 5/ UL mmhhmmhhmhhhlm...DCASR Defense Contract Administration Sersices ASN (R.E& S ) Assistant Secretary of the Navy (Research, Region Engineering, and Systems) DCNO (- Deputy

The Budget Scoring Alternatives Financing Methods for Defense Requirements

DTIC Science & Technology

2007-04-30

The government grants a franchise to a private partner to finance, design, build and operate a facility for a specific period of time. Ownership of...of an automobile from Avis implies no ownership . However, leases can be structured in an almost limitless number of complex arrangements in which...satisfy the following stringent criteria: Ownership of the asset remains with the lessor during the term of the lease and is not transferred to the

SJA Deskbook

DTIC Science & Technology

1991-10-01

34any officer or person in command or charge" of the military installation concerned. United States v. Ramirez Seijo, 281 F. Supp. 708, 710 (D.C. Puerto...for the bar letter. In United States v. Ramirez Seijo, supra, knowledge was not established where the defendant’s father signed the registered- mail...N.AViNSGEN will v:,c case involving a substantiated allegation until action is taken ani ,-p,. rua 6433 GENERAL PROVISIONS A. Betntionof Doc,.n-nt

Navy Technical Information Presentation System (NTIPS) Test and Implementation Strategy

DTIC Science & Technology

1981-12-01

IC AROEROCK I NAOI S ~ i P RF R M N C AVI AT OIO N A N DDEPARTMENT STIPRUCTRMNES COMPUATIONAN DEPARTMENT -MATHEMATICS AND 17 LOGISTICS DEPARTMENT leI...and Subtitle) S . TYPE OF REPORT & PERIOD COVERED NAVY TECHNICAL INFORMATION PRESENTATION Final SYSTEM (NTIPS) TEST AND IMPLEMENTATION 6. PERFORMING...CLASSIFICATION OP THIS PAGE (1nor. Data Enteed) ock 20 continued) system operation, training, maintenance, and logistics support. This system was

Opportunities for exercise during pullet rearing, Part II: Long-term effects on bone characteristics of adult laying hens at the end-of-lay.

PubMed

Casey-Trott, T M; Korver, D R; Guerin, M T; Sandilands, V; Torrey, S; Widowski, T M

2017-08-01

Osteoporosis in laying hens has been a production and welfare concern for several decades. The objective of this study was to determine whether differing opportunities for exercise during pullet rearing influences long-term bone quality characteristics in end-of-lay hens. A secondary objective was to assess whether differing opportunities for exercise in adult housing systems alters bone quality characteristics in end-of-lay hens. Four flock replicates of 588 Lohmann Selected Leghorn-Lite pullets were reared in either conventional cages (Conv) or an aviary rearing system (Avi) and placed into conventional cages (CC), 30-bird furnished cages (FC-S), or 60-bird furnished cages (FC-L) for adult housing. Wing and leg bones were collected at the end-of-lay to quantify bone composition and strength using quantitative computed tomography and bone breaking strength (BBS). At the end-of-lay, Avi hens had greater total and cortical cross-sectional area (P < 0.05) for the radius and tibia, greater total bone mineral content of the radius (P < 0.001), and greater tibial cortical bone mineral content (P = 0.029) than the Conv hens; however, total bone mineral density of the radius (P < 0.001) and cortical bone mineral density of the radius and tibia (P < 0.001) were greater in the Conv hens. Hens in the FC-L had greater total bone mineral density for the radius and tibia (P < 0.05) and greater trabecular bone mineral density for the radius (P = 0.027), compared to hens in the FC-S and CC. Total bone mineral content of the tibia (P = 0.030) and cortical bone mineral content of the radius (P = 0.030) and tibia (P = 0.013) were greater in the FC-L compared to the CC. The humerus of Conv hens had greater BBS than the Avi hens (P < 0.001), and the tibiae of FC-L and FC-S hens had greater BBS than CC hens (P = 0.006). Increased opportunities for exercise offered by the aviary rearing system provided improved bone quality characteristics lasting through to the end-of-lay. © The Author 2017. Published by Oxford University Press on behalf of Poultry Science Association.

Impact of Aortic Valve Calcification, as Measured by MDCT, on Survival in Patients With Aortic Stenosis

PubMed Central

Clavel, Marie-Annick; Pibarot, Philippe; Messika-Zeitoun, David; Capoulade, Romain; Malouf, Joseph; Aggarval, Shivani; Araoz, Phillip A.; Michelena, Hector I.; Cueff, Caroline; Larose, Eric; Miller, Jordan D.; Vahanian, Alec; Enriquez-Sarano, Maurice

2014-01-01

BACKGROUND Aortic valve calcification (AVC) load measures lesion severity in aortic stenosis (AS) and is useful for diagnostic purposes. Whether AVC predicts survival after diagnosis, independent of clinical and Doppler echocardiographic AS characteristics, has not been studied. OBJECTIVES This study evaluated the impact of AVC load, absolute and relative to aortic annulus size (AVCdensity), on overall mortality in patients with AS under conservative treatment and without regard to treatment. METHODS In 3 academic centers, we enrolled 794 patients (mean age, 73 ± 12 years; 274 women) diagnosed with AS by Doppler echocardiography who underwent multidetector computed tomography (MDCT) within the same episode of care. Absolute AVC load and AVCdensity (ratio of absolute AVC to cross-sectional area of aortic annulus) were measured, and severe AVC was separately defined in men and women. RESULTS During follow-up, there were 440 aortic valve implantations (AVIs) and 194 deaths (115 under medical treatment). Univariate analysis showed strong association of absolute AVC and AVCdensity with survival (both, p < 0.0001) with a spline curve analysis pattern of threshold and plateau of risk. After adjustment for age, sex, coronary artery disease, diabetes, symptoms, AS severity on hemodynamic assessment, and LV ejection fraction, severe absolute AVC (adjusted hazard ratio [HR]: 1.75; 95% confidence interval [CI]: 1.04 to 2.92; p = 0.03) or severe AVCdensity (adjusted HR: 2.44; 95% CI: 1.37 to 4.37; p = 0.002) independently predicted mortality under medical treatment, with additive model predictive value (all, p ≤ 0.04) and a net reclassification index of 12.5% (p = 0.04). Severe absolute AVC (adjusted HR: 1.71; 95% CI: 1.12 to 2.62; p = 0.01) and severe AVCdensity (adjusted HR: 2.22; 95% CI: 1.40 to 3.52; p = 0.001) also independently predicted overall mortality, even with adjustment for time-dependent AVI. CONCLUSIONS This large-scale, multicenter outcomes study of quantitative Doppler echocardiographic and MDCT assessment of AS shows that measuring AVC load provides incremental prognostic value for survival beyond clinical and Doppler echocardiographic assessment. Severe AVC independently predicts excess mortality after AS diagnosis, which is greatly alleviated by AVI. Thus, measurement of AVC by MDCT should be considered for not only diagnostic but also risk-stratification purposes in patients with AS. PMID:25236511

47 CFR 15.251 - Operation within the bands 2.9-3.26 GHz, 3.267-3.332 GHz, 3.339-3.3458 GHz, and 3.358-3.6 GHz.

Code of Federal Regulations, 2010 CFR

2010-10-01

... exceed 3000 microvolts/meter/MHz at 3 meters in any direction. Further, an AVIS, when in its operating position, shall not produce a field strength greater than 400 microvolts/meter/MHz at 3 meters in any... maximum of 100 microvolts/meter/MHz at 3 meters, measured from 30 MHz to 20 GHz for the complete system...

Budget Scoring: An Impediment to Alternative Financing

DTIC Science & Technology

2007-09-06

from Avis implies no ownership . However, leases can be structured in an almost limitless number of complex arrangements in which all terms are... Ownership of the asset remains with the lessor during the term of the lease and is not transferred to the Government at or shortly after the end of...not built to unique specification for the Government as lessee. 6) There is a private-sector market for the asset. 7) Risks of ownership of the

Les programmes revises: Amenagement forestier, interpretation theatrale. Avis a la ministre de l'Enseignement superieur et de la Science (Revised Programs: Forest Management, Theater Arts. Advisory to the Minister of Higher Education and Science).

ERIC Educational Resources Information Center

Conseil des Colleges, Quebec (Quebec).

This two-part report contains an analyses conducted by the Council of Colleges, in Quebec, of proposed revisions to programs in Forestry Management and Theater Arts offered by the province's public colleges. First, the report considers existing and proposed forestry programs in terms of their relationship to the current practices in the forestry…

Summary and Review of the Tectonic Structure of Eurasia. Part 1

DTIC Science & Technology

1980-12-05

DTIC TAB Just tIcjat DIstrju1j D it i AVi Dis a2 INTRODUCTION An extensive search of the available geologic and geo- physical literature dealing...with the crust and upper mantle properties of the U.S.S.R. and Eurasia has been conducted. During the past 25 years a vast amount of deep seismic...boundaries for these provinces were drawn after considering geologic evolution. Seismic activity, heat flow, Moho properties , crustal properties

Effects of Long-term Physical Training on the Bearers of a Float during the Nagasaki Kunchi Festival.

PubMed

Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji

Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.77.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension.

Effects of Long-term Physical Training on the Bearers of a Float during the Nagasaki Kunchi Festival

PubMed Central

Shibata, Shigemori; Kawano, Hiroaki; Maemura, Koji

2017-01-01

Objective The Nagasaki Kunchi Festival is one of the most famous festivals in Nagasaki. The bearers the floats that are used in this festival undergo long-term training for the performance. However, there have not been any studies on the effects of this training on the health of the float bearers. Methods Thirty-four men ranging in age from 20 to 49 years (mean age: 35.7±7.6 years) were included in the study. We examined the following parameters before and after the training: body weight (BW), body mass index (BMI), body fat percentage, muscle volume, systolic blood pressure (SBP), diastolic blood pressure (DBP), pulse rate (PR), pulse pressure (PP), bearing power, arterial pressure volume index (API), and arterial velocity pulse index (AVI). Results For all participants, the BW, BMI, body fat percentage, and PR were significantly decreased, and the muscle volume and bearing power were significantly increased after the training; however, there were no significant changes in the SBP, DBP, PP, API, or AVI. In the participants with hypertension, in addition to decreases in BW, BMI, body fat percentage, PR, and PP, the SBP, DBP, and API were significantly decreased after the training. Conclusion Training for bearing a float during Nagasaki Kunchi effectively improved the body structure of all participants and reduced the BP and API in participants with hypertension. PMID:28049988

Real-time portable system for fabric defect detection using an ARM processor

NASA Astrophysics Data System (ADS)

Fernandez-Gallego, J. A.; Yañez-Puentes, J. P.; Ortiz-Jaramillo, B.; Alvarez, J.; Orjuela-Vargas, S. A.; Philips, W.

2012-06-01

Modern textile industry seeks to produce textiles as little defective as possible since the presence of defects can decrease the final price of products from 45% to 65%. Automated visual inspection (AVI) systems, based on image analysis, have become an important alternative for replacing traditional inspections methods that involve human tasks. An AVI system gives the advantage of repeatability when implemented within defined constrains, offering more objective and reliable results for particular tasks than human inspection. Costs of automated inspection systems development can be reduced using modular solutions with embedded systems, in which an important advantage is the low energy consumption. Among the possibilities for developing embedded systems, the ARM processor has been explored for acquisition, monitoring and simple signal processing tasks. In a recent approach we have explored the use of the ARM processor for defects detection by implementing the wavelet transform. However, the computation speed of the preprocessing was not yet sufficient for real time applications. In this approach we significantly improve the preprocessing speed of the algorithm, by optimizing matrix operations, such that it is adequate for a real time application. The system was tested for defect detection using different defect types. The paper is focused in giving a detailed description of the basis of the algorithm implementation, such that other algorithms may use of the ARM operations for fast implementations.

Classification of antibiotics by neural network analysis of optical resonance data of whispering gallery modes in dielectric microspheres

NASA Astrophysics Data System (ADS)

Saetchnikov, Vladimir A.; Tcherniavskaia, Elina A.; Schweiger, Gustav; Ostendorf, Andreas

2012-04-01

A novel emerging technique for the label-free analysis of nanoparticles and biomolecules in liquid fluids using optical micro cavity resonance of whispering-gallery-type modes is being developed.A scheme based on polymer microspheres fixed by adhesive on the evanescence wave coupling element has been used. We demonstrated that the only spectral shift can't be used for identification of biological agents by developed approach. So neural network classifier for biological agents and micro/nano particles classification has been developed. The developed technique is the following. While tuning the laser wavelength images were recorded as avi-file. All sequences were broken into single frames and the location of the resonance was allocated in each frame. The image was filtered for noise reduction and integrated over two coordinates for evaluation of integrated energy of a measured signal. As input data normalized resonance shift of whispering-gallery modes and the relative efficiency of whispering-gallery modes excitation were used. Other parameters such as polarization of excited light, "center of gravity" of a resonance spectra etc. are also tested as input data for probabilistic neural network. After network designing and training we estimated the accuracy of classification. The classification of antibiotics such as penicillin and cephasolin have been performed with the accuracy of not less 97 %. Developed techniques can be used for lab-on-chip sensor based diagnostic tools as for identification of different biological molecules, e.g. proteins, oligonucleotides, oligosaccharides, lipids, small molecules, viral particles, cells and for dynamics of a delivery of medicines to bodies.

Video approach to chemiluminescence detection using a low-cost complementary metal oxide semiconductor (CMOS)-based camera: determination of paracetamol in pharmaceutical formulations.

PubMed

Lahuerta-Zamora, Luis; Mellado-Romero, Ana M

2017-06-01

A new system for continuous flow chemiluminescence detection, based on the use of a simple and low-priced lens-free digital camera (with complementary metal oxide semiconductor technology) as a detector, is proposed for the quantitative determination of paracetamol in commercial pharmaceutical formulations. Through the camera software, AVI video files of the chemiluminescence emission are captured and then, using friendly ImageJ public domain software (from National Institutes for Health), properly processed in order to extract the analytical information. The calibration graph was found to be linear over the range 0.01-0.10 mg L -1 and over the range 1.0-100.0 mg L -1 of paracetamol, the limit of detection being 10 μg L -1 . No significative interferences were found. Paracetamol was determined in three different pharmaceutical formulations: Termalgin®, Efferalgan® and Gelocatil®. The obtained results compared well with those declared on the formulation label and with those obtained through the official analytical method of British Pharmacopoeia. Graphical abstract Abbreviated scheme of the new chemiluminescence detection system proposed in this paper.

L'enseignement de l'anglais dans les colleges anglophones. Avis au ministre de l'enseignement superieur et de la science (English Instruction in English-Speaking Colleges. Advisory to the Minister of Higher Education and Science).

ERIC Educational Resources Information Center

Conseil des Colleges, Quebec (Quebec).

The quality of language is a matter of concern in numerous educational systems throughout the world. In Quebec, questions of the health of both the French and English languages take on particular importance. This report makes a series of proposals to the Ministry of Higher Education and Science designed to ensure the coherence and quality of…

Quasi-Square Hole with Optimum Shape in an Infinite Plate Subjected to In-Plane Loading. Optimization of Inner and Outer Boundaries of Beams and Plates with Holes,

DTIC Science & Technology

1982-04-01

Division 045 Administracion Naval Ship Resarc; and Development 14114 (Technical Library) Structures Research Division Center Langley Research Center...Virginia 23607 university of California. San Diego Dr. J. L. Swedlow Department of Applied Mechanics Carnegie-Mellon University La Jolla, California...Batdorf Keman AviDyne Suite 220 University of California Division of Kaman La Jolla, California 92037 School of Engineering Sciences Corporation and

Solar Energy Enhancement Using Down-converting Particles: A Rigorous Approach

DTIC Science & Technology

2011-06-06

Solar energy enhancement using down-converting particles: A rigorous approach Ze’ev R. Abrams,1,2 Avi Niv ,2 and Xiang Zhang2,3,a) 1Applied Science...System 1. 114905-2 Abrams, Niv , and Zhang J. Appl. Phys. 109, 114905 (2011) [This article is copyrighted as indicated in the article. Reuse of AIP...This increase per band-gap is displayed in 114905-3 Abrams, Niv , and Zhang J. Appl. Phys. 109, 114905 (2011) [This article is copyrighted as indicated

Proceedings of the Annual Conference of the Military Testing Association (19th), 17-21 October 1977, San Antonio, Texas

DTIC Science & Technology

1979-11-01

to-?ir kills, especially since we will probably be atle to field only a relatively small number of fighter pilots in future wars. Fighter pilots have...Education and Training, Information, And Legal, too many colonel positlons were allocated. Overall, many jobs wer found to be undergraded, especially at the...t preparing the final eppmntice progress/status report, 4e avy C :-vs educacion specialist will regard previous work experience as distri±xtnd

Near Real Time VHF Telemetry of Near Shore Oceanographic Data

DTIC Science & Technology

1989-06-01

drecktion. but can also measure temperature , pressure ’ind coniductnit:\\ N1 ic ,- ttd w tXt.i uuall have sevecral recording current meters Nverticalix sPaICed...hich can comne fr-om other transmiissions, man-made static. atmo~lteic s tic c cni emsions and receiver temperature -inducedl noise. NI oiatonschieme...Sea Surface Temperature (SSTL DNISP Microwave Imcer iSS!I I) and Advanced Vern Ilih Resolution Radiometer (AVI RR). NIPRFs’ interest is to provide the

2011 Joint Service Power Expo. Volume 2. Video Files

DTIC Science & Technology

2011-05-05

Untitled Document 2011power.html[3/22/2016 1:21:48 PM] Files are in Adobe, AVCHD Video (.m2ts), .avi format, MPEG-4 Movie (.mp4), and Windows Media...Development, ABSL Power Solutions Inc. 12799 - “Utilization of a Ducted Wind Turbine in a Trailer -Mounted Renewable Energy Micro-grid”, Mr. Mark Matthews, VP...of Sales and Marketing, WindTamer Corporation and Mr. Adeeb Saba WindTamer MPEG-4 Movie (.mp4) SESSION 16 On-Board Vehicle Power (OBVP) 1

Oligonucleotide Antiviral Therapeutics: Antisense and RNA Interference for Highly Pathogenic RNA Viruses

DTIC Science & Technology

2008-01-01

siRNA delivery method in his animal model, it remains to be studied whether this general pproach is safe in humans. Often cited as an advantage of siRNAs...way studying the intravenous delivery f ASO drug candidates targeting Bcl-2 (Genasense®, Genta) nd c-myc (Resten-NG®, AVI BioPharma), while completed... studies have been published investigating MOs as a treatment for EBOV infection, with both showing fficacy in animal models. PMOs were designed to

Aviso: altimetry products & services in 2013

NASA Astrophysics Data System (ADS)

Mertz, F.; Bronner, E.; Rosmorduc, V.; Maheu, C.

2013-12-01

Since the launch of Topex/Poseidon, more than 20 years ago, satellite altimetry has evolved in parallel with the user community and oceanography. As a result of this evolution, we now have: - a wide range of products, more and more easy-to-use, spanning complete GDRs to pre-computed sea level anomalies, gridded datasets and indicators such as MSL index or ENSO index. - a wide range of applications in the oceanographic community: ocean observation, biology, climate, ... - a mature approach, combining altimetric data from various satellites and merging data acquired using different observation techniques, including altimetry, to give us a global view of the ocean; - data available in real or near-real time for operational use. Different services are available either to choose between the various datasets, or to download, extract or even visualize the data. An Ipad-Iphone application, AvisOcean has also been opened in September 2012, for information about the data and their updates. 2013 has seen major changes in Aviso data distribution, both in data products themselves and in their distribution, including an online extraction tool in preparation (Online Data Extraction Service). An overview of available products & services, how to access them today, will be presented.

Impact of aortic valve calcification, as measured by MDCT, on survival in patients with aortic stenosis: results of an international registry study.

PubMed

Clavel, Marie-Annick; Pibarot, Philippe; Messika-Zeitoun, David; Capoulade, Romain; Malouf, Joseph; Aggarval, Shivani; Araoz, Phillip A; Michelena, Hector I; Cueff, Caroline; Larose, Eric; Miller, Jordan D; Vahanian, Alec; Enriquez-Sarano, Maurice

2014-09-23

Aortic valve calcification (AVC) load measures lesion severity in aortic stenosis (AS) and is useful for diagnostic purposes. Whether AVC predicts survival after diagnosis, independent of clinical and Doppler echocardiographic AS characteristics, has not been studied. This study evaluated the impact of AVC load, absolute and relative to aortic annulus size (AVCdensity), on overall mortality in patients with AS under conservative treatment and without regard to treatment. In 3 academic centers, we enrolled 794 patients (mean age, 73 ± 12 years; 274 women) diagnosed with AS by Doppler echocardiography who underwent multidetector computed tomography (MDCT) within the same episode of care. Absolute AVC load and AVCdensity (ratio of absolute AVC to cross-sectional area of aortic annulus) were measured, and severe AVC was separately defined in men and women. During follow-up, there were 440 aortic valve implantations (AVIs) and 194 deaths (115 under medical treatment). Univariate analysis showed strong association of absolute AVC and AVCdensity with survival (both, p < 0.0001) with a spline curve analysis pattern of threshold and plateau of risk. After adjustment for age, sex, coronary artery disease, diabetes, symptoms, AS severity on hemodynamic assessment, and LV ejection fraction, severe absolute AVC (adjusted hazard ratio [HR]: 1.75; 95% confidence interval [CI]: 1.04 to 2.92; p = 0.03) or severe AVCdensity (adjusted HR: 2.44; 95% CI: 1.37 to 4.37; p = 0.002) independently predicted mortality under medical treatment, with additive model predictive value (all, p ≤ 0.04) and a net reclassification index of 12.5% (p = 0.04). Severe absolute AVC (adjusted HR: 1.71; 95% CI: 1.12 to 2.62; p = 0.01) and severe AVCdensity (adjusted HR: 2.22; 95% CI: 1.40 to 3.52; p = 0.001) also independently predicted overall mortality, even with adjustment for time-dependent AVI. This large-scale, multicenter outcomes study of quantitative Doppler echocardiographic and MDCT assessment of AS shows that measuring AVC load provides incremental prognostic value for survival beyond clinical and Doppler echocardiographic assessment. Severe AVC independently predicts excess mortality after AS diagnosis, which is greatly alleviated by AVI. Thus, measurement of AVC by MDCT should be considered for not only diagnostic but also risk-stratification purposes in patients with AS. Copyright © 2014 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Reliability of the U.S. Army Ambulatory Care Data Base (ACDB) Study: Methodology and Clinical Findings

DTIC Science & Technology

1989-02-01

medical record as Flu Symptoms and Inflammation of Mucous Membrane of the Nose. In such cases, the Principal Investigator, in consultation with staff...Nonavailability could have been caused by a patient’s clinical appointment or relocation, personal retention of records, selection of the record for a quality...8217, TENITtlS 233𔃻 CIS VULVA 6141 H1IONIC SAIPINGITIS/OOPHORITIS 2 i-.- 1 Nip"- HYEI;AVI, k 213 SYPILIS 𔃻 4CONSYLOMAIA 6201 CORPiiS LUTEUM CYST ,*N2’. f

Atlas/State Data Abstract for the United States, Fiscal Year 1982

DTIC Science & Technology

1982-01-01

Fiorida (FL) 12 28 Georgia (GA) 13 30 Hawaii (HI) 14 32 Idaho 0Ui)) 15 34 Illinois (IL) 16 36 Indiana (IN) 17 38 Iowa (IA) 18 40 Kansas (KS) 19 42... IDAHO 0 25 50 75 100 I I I I’ Sc.I. in Mies ®BOISE * IDAHO FALLS NAVAL NUCLEAR POWER r TRAINING UNIT MOUNTAIN HOME AFB 48 • NAT. GUARD LINCOLN...INDUSTRIAL OTHER (NHO. @ 9 < TRAINING; ETC.) DEPOT&SUPPLY D ɠ> 34 IDAHO FISCAL YEAR 1982 (DOLLARS IN THOUSANDS) I N avy. I Other Personnel/Expenditures

Proceedings of the Symposium on the Effect of the Ionosphere on Space and Terrestrial Systems (1978) Held on January 24 - 26 1978

DTIC Science & Technology

1978-01-01

experimental avi- of the Institute of Navigaton Ar ospaco dence selative to the stability of group velocity eeting, Denver, Colorado, April .3-14, 1977. to the...data groups correlated but nevertheless indicates that. magnetic activity is a stronger control than solar activity at these high latitudes, perhaps by... groups . The first esters T and p are ottained by performing a involves gecerel results that pertain to the log-Itneer. least-equares fit to the phase

Innovative teaching: Use of Screencast in the Agronomist Engineer High School of the UPM

NASA Astrophysics Data System (ADS)

Mediola, Maria Angeles; Aguado, Pedro Luis; Espejo, Rafael

2013-04-01

In the last academic courses, the Polytechnic University of Madrid (UPM) has supported the use of multimedia materials and methods in education and learning processes to improve the efficiency and impact obtained by faculty and students. With this aim during 2011-2012 course the multimedia method titled "Screencast" has been implemented in the subject "Plantas de Interés Agroalimentario" included in the curricula of the Agronomist Engineer High School. Next year will be apply in the subject "Soil Science" in the new degree. The Screencast tools allow record digital videos with sound directly into a computer so lecture and class can be recorded directly. The videos can be edited after including narrations, special effects as zoom, notes, images, etc. Screencast tools are simple use tools which are easy made tutorials, manuals, presentations and shows that help to students with different processes that are very hard to understand for students (1) (2). There are different Screencast tools in the market and after an evaluation process the most suitable for our need has been BB FlashBack Express (3) because is easy use, free and compatible with WEBCAM. This software allows export to Flash and AVI video formats. In our case the format chosen was the Flash format because the file sizes obtained were smaller than in AVI format. The use of BB FlashBack Express of the studied subject allowed make easy self-learning multimedia material and testing different methodologies and procedures for the use of this multimedia source in Internet. The BB FlashBack Express software was used during the course by teachers and students of this subject achieving a good improvement in the education and learning processes. The evaluation of the results obtained in the application of this method had shown that ability of students to use new technologies and spread their ideas has been increased as much into as outside classrooms. The materials made in this work had been joined to different learning platforms of the UPM as UPM Educational Channel in YouTube and others video-conference applications developed by UPM. There is possible to export the recorded material to SCORM format which can be included in Moodle (Learning Virtual Environment) and be used by students when they needed it. Bibliography: [1] Lloyd, S., Robertson, C. (2012). Screencast Tutorials Enhance Student Learning of Statistics. Journal of Teaching and Psychology. January 2012. vol. 39 (1). pp. 67-71.

Frequency assessment of spatially distributed generations of flood scenarios: an application on Italian territory

NASA Astrophysics Data System (ADS)

Lomazzi, M.; Roth, G.; Rudari, R.; Taramasso, A. C.; Ghizzoni, T.; Benedetti, R.; Espa, G.; Terpessi, C.

2009-12-01

The flooding risk impact on society cannot be understated: it influences land use and territorial planning and development at both physical and regulatory levels. To cope with it, a variety of actions can be put in place, involving multidisciplinary competences. Mitigation measures goes from the improvement of monitoring systems to the development of hydraulic structures, throughout land use restrictions, civil protection and insurance plans. All of those options present social and economic impacts, either positive or negative, whose proper estimate should rely on the assumption of appropriate - present and future - scenarios, i.e. quantitative event descriptions in terms of i) the flood hazard, with its probability of occurrence, extension, intensity, and duration, ii) the exposed values and iii) their vulnerability. At present, initial attention has been devoted to the design of flood scenarios, or ensembles of them, and to the evaluation of their frequency of occurrence. In the present work, a model for spatially distributed flood scenarios generation and frequency assessment is proposed and applied to the Italian territory. The study area has been divided into homogeneous regions according to their hydrologic, orographic and meteoclimatic characteristics. A statistical model for flood scenarios simulation has been implemented throughout a conditional approach based on MCMC simulations by using i) a historical flood events catalogue; ii) a homogeneous regions correlation matrix; and iii) an auxiliary variables data set. In this framework, the role of the information stored in the historical flood events catalogue "Aree Vulnerate Italiane" (AVI, http://avi.gndci.cnr.it/), produced by the Italian National Research Council, is of crucial importance.

Evaluation of LVA Full-Scale Hydrodynamic Vehicle Motion Effects on Personnel Performance

DTIC Science & Technology

1979-04-01

by F. A. Muckler 041 so"i C3 Approved by ""loAIoI James .. Regan fl ific" JSIIV IM............... "’"" ’.Technical Director i MAY ]7 i• ! s ...34, ~~Dizdibtfiob Uliý:m Navy Personnel Research and Development Center San Diego, California 92152 Best Available Copy U S avy CLA51"FiCATION OF THIS PAGW lR De...force ships, the LVJ viii1 transnort troops a-t relatively high spoked (25 mph or more) to beach or inland combat sp* s otios. The LVA will eventually

The Pattern of Soviet Conduct in the Third World, Review and Preview. Part 2

DTIC Science & Technology

1983-03-07

be quoted or copied without approval from OSD/Net Assessment. Aooession For DTIC TAB El Dit I-’I t Y " c•doi ;Avi.- ± end/or L i :itst I pc l 4•al IA...successcors have stooc, y that cecision. (Moscow odes riot recconioze tnis action.) Alth•cuph revolutionary Iran has i nioroved or estaolisned relations...far nesw tne world rar.et ievel and oepat, repotiaiions for a orice increase of roucniv t0w oercenz. ? y marc- I5d. witm the Soviets’ best otfer stiil

A framework for visualization of battlefield network behavior

NASA Astrophysics Data System (ADS)

Perzov, Yury; Yurcik, William

2006-05-01

An extensible network simulation application was developed to study wireless battlefield communications. The application monitors node mobility and depicts broadcast and unicast traffic as expanding rings and directed links. The network simulation was specially designed to support fault injection to show the impact of air strikes on disabling nodes. The application takes standard ns-2 trace files as an input and provides for performance data output in different graphical forms (histograms and x/y plots). Network visualization via animation of simulation output can be saved in AVI format that may serve as a basis for a real-time battlefield awareness system.

Environmental Assessment: Hurricane Katrina Recovery and Installation Development at Keesler Air Force Base, Mississippi

DTIC Science & Technology

2006-12-01

ly Sweeney Jef fe rso n D avi s Ze ro M a u villa Foulois Fe che t Cabell Esposito Percy Thunderbolt James Ar nol d Pine Lawn Monroe W all Bilm arsan... Jackson counties in Mississippi. These three counties encompass 1,785 square miles of land area and comprise the entire coastline of Mississippi along the...24.2% Hancock County 46,711 11.6% 15.7% 23.4% Harrison County 193,810 29.8% 16.5% 25.7% Jackson County 135,940 27.6% 15.0% 25.8% Biloxi MSA 376,461

Historical hydrology and database on flood events (Apulia, southern Italy)

NASA Astrophysics Data System (ADS)

Lonigro, Teresa; Basso, Alessia; Gentile, Francesco; Polemio, Maurizio

2014-05-01

Historical data about floods represent an important tool for the comprehension of the hydrological processes, the estimation of hazard scenarios as a basis for Civil Protection purposes, as a basis of the rational land use management, especially in karstic areas, where time series of river flows are not available and the river drainage is rare. The research shows the importance of the improvement of existing flood database with an historical approach, finalized to collect past or historical floods event, in order to better assess the occurrence trend of floods, in the case for the Apulian region (south Italy). The main source of records of flood events for Apulia was the AVI (the acronym means Italian damaged areas) database, an existing Italian database that collects data concerning damaging floods from 1918 to 1996. The database was expanded consulting newspapers, publications, and technical reports from 1996 to 2006. In order to expand the temporal range further data were collected searching in the archives of regional libraries. About 700 useful news from 17 different local newspapers were found from 1876 to 1951. From a critical analysis of the 700 news collected since 1876 to 1952 only 437 were useful for the implementation of the Apulia database. The screening of these news showed the occurrence of about 122 flood events in the entire region. The district of Bari, the regional main town, represents the area in which the great number of events occurred; the historical analysis confirms this area as flood-prone. There is an overlapping period (from 1918 to 1952) between old AVI database and new historical dataset obtained by newspapers. With regard to this period, the historical research has highlighted new flood events not reported in the existing AVI database and it also allowed to add more details to the events already recorded. This study shows that the database is a dynamic instrument, which allows a continuous implementation of data, even in real time. More details on previous results of this research activity were recently published (Polemio, 2010; Basso et al., 2012; Lonigro et al., 2013) References Basso A., Lonigro T. and Polemio M. (2012) "The improvement of historical database on damaging hydrogeological events in the case of Apulia (Southern Italy)". Rendiconti online della Società Geologica Italiana, 21: 379-380; Lonigro T., Basso A. and Polemio M. (2013) "Historical database on damaging hydrogeological events in Apulia region (Southern Italy)". Rendiconti online della Società Geologica Italiana, 24: 196-198; Polemio M. (2010) "Historical floods and a recent extreme rainfall event in the Murgia karstic environment (Southern Italy)". Zeitschrift für Geomorphologie, 54(2): 195-219.

A simple and robust approach to immobilization of antibody fragments.

PubMed

Ikonomova, Svetlana P; He, Ziming; Karlsson, Amy J

2016-08-01

Antibody fragments, such as the single-chain variable fragment (scFv), have much potential in research and diagnostics because of their antigen-binding ability similar to a full-sized antibody and their ease of production in microorganisms. Some applications of antibody fragments require immobilization on a surface, and we have established a simple immobilization method that is based on the biotin-streptavidin interaction and does not require a separate purification step. We genetically fused two biotinylation tags-the biotin carboxyl carrier protein (BCCP) or the AviTag minimal sequence-to six different scFvs (scFv13R4, scFvD10, scFv26-10, scFv3, scFv5, and scFv12) for site-specific biotinylation in vivo by endogenous biotin ligases produced by Escherichia coli. The biotinylated scFvs were immobilized onto streptavidin-coated plates directly from cell lysates, and immobilization was detected through enzyme-linked immunosorbent assays. All scFvs fusions were successfully immobilized, and scFvs biotinylated via the BCCP tag tended to immobilize better than those biotinylated via the AviTag, even when biotinylation efficiency was improved with the biotin ligase BirA. The ability of immobilized scFvs to bind antigens was confirmed using scFv13R4 and scFvD10 with their respective targets β-galactosidase and bacteriophage lambda head protein D (gpD). The immobilized scFv13R4 bound to β-galactosidase at the same level for both biotinylation tags when the surface was saturated with the scFv, and immobilized scFvs retained their functionality for at least 100days after immobilization. The simplicity and robustness of our method make it a promising approach for future applications that require antibody fragment immobilization. Copyright © 2016 Elsevier B.V. All rights reserved.

A Perspective on Multiaccess Channels

DTIC Science & Technology

1984-09-01

packets that arrived between T and T+ are transmitted. The parameter v is determined by all each transmitter based on the history of the feedback up to time...t. The transmitters also calculate T based on the feedback history . It is helpful to view the packet arrivals in ETt) as being in a distributed queue...Cambridge, MA. 4T TO. JC-N~g 4f aAviE. I -w l 2.1 WPr IfCI’YIL 2. ICA 6-- e NO.Yt4 Z/ ’) eqp~ ~ 46 5AZw’ I.q e L 1!x;Y :r/; YFv (1.~i 21 V4 Gf~~ .. 2 15 5.5

Dual-Layer Video Encryption using RSA Algorithm

NASA Astrophysics Data System (ADS)

Chadha, Aman; Mallik, Sushmit; Chadha, Ankit; Johar, Ravdeep; Mani Roja, M.

2015-04-01

This paper proposes a video encryption algorithm using RSA and Pseudo Noise (PN) sequence, aimed at applications requiring sensitive video information transfers. The system is primarily designed to work with files encoded using the Audio Video Interleaved (AVI) codec, although it can be easily ported for use with Moving Picture Experts Group (MPEG) encoded files. The audio and video components of the source separately undergo two layers of encryption to ensure a reasonable level of security. Encryption of the video component involves applying the RSA algorithm followed by the PN-based encryption. Similarly, the audio component is first encrypted using PN and further subjected to encryption using the Discrete Cosine Transform. Combining these techniques, an efficient system, invulnerable to security breaches and attacks with favorable values of parameters such as encryption/decryption speed, encryption/decryption ratio and visual degradation; has been put forth. For applications requiring encryption of sensitive data wherein stringent security requirements are of prime concern, the system is found to yield negligible similarities in visual perception between the original and the encrypted video sequence. For applications wherein visual similarity is not of major concern, we limit the encryption task to a single level of encryption which is accomplished by using RSA, thereby quickening the encryption process. Although some similarity between the original and encrypted video is observed in this case, it is not enough to comprehend the happenings in the video.

Ethical considerations regarding the implementation of new technologies and techniques in surgery.

PubMed

Strong, Vivian E; Forde, Kenneth A; MacFadyen, Bruce V; Mellinger, John D; Crookes, Peter F; Sillin, Lelan F; Shadduck, Phillip P

2014-08-01

Ethical considerations relevant to the implementation of new surgical technologies and techniques are explored and discussed in practical terms in this statement, including (1) How is the safety of a new technology or technique ensured?; (2) What are the timing and process by which a new technology or technique is implemented at a hospital?; (3) How are patients informed before undergoing a new technology or technique?; (4) How are surgeons trained and credentialed in a new technology or technique?; (5) How are the outcomes of a new technology or technique tracked and evaluated?; and (6) How are the responsibilities to individual patients and society at large balanced? The following discussion is presented with the intent to encourage thought and dialogue about ethical considerations relevant to the implementation of new technologies and new techniques in surgery.

Word Frequency Analysis. MOS: 45K. Skill Levels 1 & 2.

DTIC Science & Technology

1981-05-01

ACCESSION No. 3. RECIPIENT’S CATALOG 14UMBER 4. TITLE...change. Accession For DTIC TAB [ Ux~amo~ed []Just iriction D_.st ribution, pYAvai labilit 7 codt.s A o Avi ado S* HEADQUARTERS DATA CONTROL NMEIII m...6 (’N "N 6 . "!4 ON Cf c4:’i 6 Cu-L /’Uc.RE" L ~u:ir 6 6 Z72 : SS7 2 t N 6’vy \\ .C.1F? 6 H% ’ e y N ’CIo6’ 6 A fg; 6 l~ 14 6 r I 5’J 6 ’~1!6 ’",13P 6

Skyrmion dynamics in a chiral magnet driven by periodically varying spin currents*

NASA Astrophysics Data System (ADS)

Zhu, Rui; Zhang, Yin-Yan

2016-12-01

In this work, we investigated the spin dynamics in a slab of chiral magnets induced by an alternating (ac) spin current. Periodic trajectories of the skyrmion in real space are discovered under the ac current as a result of the Magnus and viscous forces, which originate from the Gilbert damping, the spin transfer torque, and the β-nonadiabatic torque effects. The results are obtained by numerically solving the Landau-Lifshitz-Gilbert equation and can be explained by the Thiele equation characterizing the skyrmion core motion. Supplementary material in the form of one avi file available from the Journal web page at: http://dx.doi.org/10.1140/epjb/e2016-70467-9

Intelligent Adaptive Interfaces: Summary Report on Design, Development, and Evaluation of Intelligent Adaptive Interfaces for the Control of Multiple UAVs from an Airborne Platform

DTIC Science & Technology

2006-12-01

gestion de la masse d’informations nécessaires pour appuyer la prise de décision efficace. De l’avis des opérateurs d’engins télépilotés...opérateurs d’engins télépilotés risque de croître exponentiellement, de sorte que de fortes contraintes seront imposées au personnel exécutant les missions...commande réelle des engins télépilotés que la gestion des données, y compris la conversion de ces données en information et l’acheminement

A Database of Historical Information on Landslides and Floods in Italy

NASA Astrophysics Data System (ADS)

Guzzetti, F.; Tonelli, G.

2003-04-01

For the past 12 years we have maintained and updated a database of historical information on landslides and floods in Italy, known as the National Research Council's AVI (Damaged Urban Areas) Project archive. The database was originally designed to respond to a specific request of the Minister of Civil Protection, and was aimed at helping the regional assessment of landslide and flood risk in Italy. The database was first constructed in 1991-92 to cover the period 1917 to 1990. Information of damaging landslide and flood event was collected by searching archives, by screening thousands of newspaper issues, by reviewing the existing technical and scientific literature on landslides and floods in Italy, and by interviewing landslide and flood experts. The database was then updated chiefly through the analysis of hundreds of newspaper articles, and it now covers systematically the period 1900 to 1998, and non-systematically the periods 1900 to 1916 and 1999 to 2002. Non systematic information on landslide and flood events older than 20th century is also present in the database. The database currently contains information on more than 32,000 landslide events occurred at more than 25,700 sites, and on more than 28,800 flood events occurred at more than 15,600 sites. After a brief outline of the history and evolution of the AVI Project archive, we present and discuss: (a) the present structure of the database, including the hardware and software solutions adopted to maintain, manage, use and disseminate the information stored in the database, (b) the type and amount of information stored in the database, including an estimate of its completeness, and (c) examples of recent applications of the database, including a web-based GIS systems to show the location of sites historically affected by landslides and floods, and an estimate of geo-hydrological (i.e., landslide and flood) risk in Italy based on the available historical information.

Mapping protease substrates using a biotinylated phage substrate library.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scholle, M. D.; Kriplani, U.; Pabon, A.

We describe a bacteriophage M13 substrate library encoding the AviTag (BirA substrate) and combinatorial heptamer peptides displayed at the N terminus of the mature form of capsid protein III. Phages are biotinylated efficiently (> or = 50%) when grown in E. coli cells coexpressing BirA, and such viral particles can be immobilized on a streptavidin-coated support and released by protease cleavage within the combinatorial peptide. We have used this library to map the specificity of human Factor Xa and a neuropeptidase, neurolysin (EC3.4.24.16). Validation by analysis of isolated peptide substrates has revealed that neurolysin recognizes the motif hydrophobic-X-Pro-Arg-hydrophobic, where Arg-hydrophobicmore » is the scissile bond.« less

Solid Earth science in the 1990s. Volume 3: Measurement techniques and technology

NASA Technical Reports Server (NTRS)

1991-01-01

Reports are contained from the NASA Workshop on Solid Earth Science in the 1990s. The techniques and technologies needed to address the program objectives are discussed. The Measurement Technique and Technology Panel identified (1) candidate measurement systems for each of the measurements required for the Solid Earth Science Program that would fall under the NASA purview; (2) the capabilities and limitations of each technique; and (3) the developments necessary for each technique to meet the science panel requirements. In nearly all cases, current technology or a development path with existing technology was identified as capable of meeting the requirements of the science panels. These technologies and development paths are discussed.

Non-contact Real-time heart rate measurements based on high speed circuit technology research

NASA Astrophysics Data System (ADS)

Wu, Jizhe; Liu, Xiaohua; Kong, Lingqin; Shi, Cong; Liu, Ming; Hui, Mei; Dong, Liquan; Zhao, Yuejin

2015-08-01

In recent years, morbidity and mortality of the cardiovascular or cerebrovascular disease, which threaten human health greatly, increased year by year. Heart rate is an important index of these diseases. To address this status, the paper puts forward a kind of simple structure, easy operation, suitable for large populations of daily monitoring non-contact heart rate measurement. In the method we use imaging equipment video sensitive areas. The changes of light intensity reflected through the image grayscale average. The light change is caused by changes in blood volume. We video the people face which include the sensitive areas (ROI), and use high-speed processing circuit to save the video as AVI format into memory. After processing the whole video of a period of time, we draw curve of each color channel with frame number as horizontal axis. Then get heart rate from the curve. We use independent component analysis (ICA) to restrain noise of sports interference, realized the accurate extraction of heart rate signal under the motion state. We design an algorithm, based on high-speed processing circuit, for face recognition and tracking to automatically get face region. We do grayscale average processing to the recognized image, get RGB three grayscale curves, and extract a clearer pulse wave curves through independent component analysis, and then we get the heart rate under the motion state. At last, by means of compare our system with Fingertip Pulse Oximeter, result show the system can realize a more accurate measurement, the error is less than 3 pats per minute.

Innovative methods for knowledge transfer

NASA Astrophysics Data System (ADS)

Goanta, A. M.

2015-11-01

At this time, learning takes place, either with classic books on paper support or using books scanned or drawn and further converted into PDF or PPT files that are printed on type support CD / DVD. The latter modern means of learning, the study adds live on the Internet using search engines and not least e-learning method, which allows the study of bibliographic related materials in PDF or PPT, stacked and grouped on the basis of a curriculum imposed which can be accessed on a website via a user name and password. Innovative methods come to successfully use other file types than those mentioned above. The graphics in teaching technical subjects such as descriptive geometry can be achieved using animated PowerPoint files, allowing for visualization of steps to be taken, in the case of solving by drawing a descriptive geometry. Another innovative method relies on the use of HTML files, inspired by related sites help design software packages that can be used when teaching descriptive geometry that the technical design. Through this work, the author has proposed to present a new innovative method, which is inspired by the methods listed above, but involves using AVI files to teaching of computer-assisted type graphics or info graphics. In general this new author's method lends itself particularly well to the teaching of the use of software packages because the student actually see the place from where the delivered command is accessed and contextual options of right button of the mouse. These laboratory courses or mentoring can be freestanding cards support CD / DVD or can be posted on websites with restricted access based on user name and password. Practically paper presents the methodology of creating courses and tutorials in AVI format, and how to monitor the degree of accessing the website, on which there were posted mentioned teaching materials, using the tools offered by Google Analytics. The results consist of graphical work, about the degree of access to educational materials, made on the basis of various criteria, such as the: time of access, access location, age of those who accessed, chapters accessed, etc. Finally the author presents his findings on the benefits of this method.

TAS2R38 bitter taste genetics, dietary vitamin C, and both natural and synthetic dietary folic acid predict folate status, a key micronutrient in the pathoaetiology of adenomatous polyps.

PubMed

Lucock, Mark; Ng, Xiaowei; Boyd, Lyndell; Skinner, Virginia; Wai, Ron; Tang, Sa; Naylor, Charlotte; Yates, Zoë; Choi, Jeong-Hwa; Roach, Paul; Veysey, Martin

2011-08-01

Taste perception may influence dietary preferences and nutrient intakes contributing to diet-related disease susceptibility. This study examined bitter taste genetics and whether variation in the TAS2R38 gene at three polymorphic loci (A49P, V262A and I296V) could alter dietary and systemic folate levels and dietary vitamin C intake, and whether a nutrigenetic circuit existed that might link bitter taste, folate/antioxidant status and risk for a colonic adenomatous polyp. TAS2R38 diplotype predicted bitter taste (PROP) phenotype (p value <0.00001) and red cell folate status (p=0.0179) consistent with the diplotype that has the broadest range of bitter perception (AVI/PAV) also possessing the highest average red cell folate value. However, TAS2R38 diplotype did not predict dietary intake of methylfolic acid, pteroylmonoglutamic acid or total folic acid. Neither did it predict dietary intake of vitamin C. Despite this, intake of dietary folate predicts red cell folate with analysis pointing to a key nutrient-nutrient interaction between vitamin C intake and systemic folate status. Analysis of 38 patients with an adenomatous polyp and 164 controls showed that individually, dietary nutrient intake, nutrient status and taste diplotype did not influence polyp risk. However, red cell folate status (in individuals below the population median value) did interact with bitter taste diplotype (AVI/PAV) to predict polyp risk (p=0.0145). Furthermore, synthetic folic acid (below median intake) was statistically associated with adenoma occurrence (p=0.0215); individuals with adenomatous polyps had a 1.77× higher intake than controls. Additionally, stepwise regression taking account of all dietary nutrients showed a tight relationship between methylfolic acid (but not pteroylmonoglutamic acid) intake and red cell folate level in those with a low folate status and occurrence of an adenomatous polyp (p=0.0039). These findings point to a role for folate in the pathoaetiology of adenomatous polyps, with the natural and synthetic vitamers not necessarily having the same biological effect. This journal is © The Royal Society of Chemistry 2011

Dietary protection against free radicals: a case for multiple testing to establish structure-activity relationships for antioxidant potential of anthocyanic plant species.

PubMed

Philpott, Martin; Lim, Chiara Cheng; Ferguson, Lynnette R

2009-03-01

DNA damage by reactive species is associated with susceptibility to chronic human degenerative disorders. Anthocyanins are naturally occurring antioxidants, that may prevent or reverse such damage. There is considerable interest in anthocyanic food plants as good dietary sources, with the potential for reducing susceptibility to chronic disease. While structure-activity relationships have provided guidelines on molecular structure in relation to free hydroxyl-radical scavenging, this may not cover the situation in food plants where the anthocyanins are part of a complex mixture, and may be part of complex structures, including anthocyanic vacuolar inclusions (AVIs). Additionally, new analytical methods have revealed new structures in previously-studied materials. We have compared the antioxidant activities of extracts from six anthocyanin-rich edible plants (red cabbage, red lettuce, blueberries, pansies, purple sweetpotato skin, purple sweetpotato flesh and Maori potato flesh) using three chemical assays (DPPH, TRAP and ORAC), and the in vitro Comet assay. Extracts from the flowering plant, lisianthus, were used for comparison. The extracts showed differential effects in the chemical assays, suggesting that closely related structures have different affinities to scavenge different reactive species. Integration of anthocyanins to an AVI led to more sustained radical scavenging activity as compared with the free anthocyanin. All but the red lettuce extract could reduce endogenous DNA damage in HT-29 colon cancer cells. However, while extracts from purple sweetpotato skin and flesh, Maori potato and pansies, protected cells against subsequent challenge by hydrogen peroxide at 0 degrees C, red cabbage extracts were pro-oxidant, while other extracts had no effect. When the peroxide challenge was at 37 degrees C, all of the extracts appeared pro-oxidant. Maori potato extract, consistently the weakest antioxidant in all the chemical assays, was more effective in the Comet assays. These results highlight the dangers of generalising to potential health benefits, based solely on identification of high anthocyanic content in plants, results of a single antioxidant assay and traditional approaches to structure activity relationships. Subsequent studies might usefully consider complex mixtures and a battery of assays.

Comparison of anthropometric indices for predicting the risk of metabolic syndrome and its components in Chinese adults: a prospective, longitudinal study

PubMed Central

Wang, Haoyu; Liu, Aihua; Zhao, Tong; Gong, Xun; Pang, Tianxiao; Zhou, Yingying; Xiao, Yue; Yan, Yumeng; Fan, Chenling; Teng, Weiping; Lai, Yaxin; Shan, Zhongyan

2017-01-01

Objectives Our study aimed to distinguish the ability of anthropometric indices to assess the risk of metabolic syndrome (MetS). Design Prospective cohort study. Setting Shenyang, China. Participants A total of 379 residents aged between 40 and 65 were enrolled. 253 of them were free of MetS and had been followed up for 4.5 years. Methods At baseline, all the participants underwent a thorough medical examination. A variety of anthropometric parameters were measured and calculated, including waist circumference (WC), body mass index (BMI), a body shape index (ABSI), abdominal volume index (AVI), body adiposity index, body roundness index, conicity index, waist-to-hip ratio and visceral adiposity index (VAI). After 4.5 year follow-up, we re-examined whether participants were suffering from MetS. A receiver operating characteristic (ROC) curve was applied to examine the potential of the above indices to identify the status and risk of MetS. Outcomes Occurrence of MetS. Results At baseline, 33.2% participants suffered from MetS. All of the anthropometric indices showed clinical significance, and VAI was superior to the other indices as it was found to have the largest area under the ROC curve. After a 4.5 year follow-up, 37.8% of men and 23.9% of women developed MetS. ROC curve analysis suggested that baseline BMI was the strongest predictor of MetS for men (0.77 (0.68–0.85)), and AVI was the strongest for women (0.72 (0.64–0.79)). However, no significant difference was observed between WC and both indices. In contrast, the baseline ABSI did not predict MetS in both genders. Conclusions The present study indicated that these different indices derived from anthropometric parameters have different discriminatory abilities for MetS. Although WC did not have the largest area under the ROC curve for diagnosing and predicting MetS, it may remain a better index of MetS status and risk because of its simplicity and wide use. PMID:28928179

Novel modes and adaptive block scanning order for intra prediction in AV1

NASA Astrophysics Data System (ADS)

Hadar, Ofer; Shleifer, Ariel; Mukherjee, Debargha; Joshi, Urvang; Mazar, Itai; Yuzvinsky, Michael; Tavor, Nitzan; Itzhak, Nati; Birman, Raz

2017-09-01

The demand for streaming video content is on the rise and growing exponentially. Networks bandwidth is very costly and therefore there is a constant effort to improve video compression rates and enable the sending of reduced data volumes while retaining quality of experience (QoE). One basic feature that utilizes the spatial correlation of pixels for video compression is Intra-Prediction, which determines the codec's compression efficiency. Intra prediction enables significant reduction of the Intra-Frame (I frame) size and, therefore, contributes to efficient exploitation of bandwidth. In this presentation, we propose new Intra-Prediction algorithms that improve the AV1 prediction model and provide better compression ratios. Two (2) types of methods are considered: )1( New scanning order method that maximizes spatial correlation in order to reduce prediction error; and )2( New Intra-Prediction modes implementation in AVI. Modern video coding standards, including AVI codec, utilize fixed scan orders in processing blocks during intra coding. The fixed scan orders typically result in residual blocks with high prediction error mainly in blocks with edges. This means that the fixed scan orders cannot fully exploit the content-adaptive spatial correlations between adjacent blocks, thus the bitrate after compression tends to be large. To reduce the bitrate induced by inaccurate intra prediction, the proposed approach adaptively chooses the scanning order of blocks according to criteria of firstly predicting blocks with maximum number of surrounding, already Inter-Predicted blocks. Using the modified scanning order method and the new modes has reduced the MSE by up to five (5) times when compared to conventional TM mode / Raster scan and up to two (2) times when compared to conventional CALIC mode / Raster scan, depending on the image characteristics (which determines the percentage of blocks predicted with Inter-Prediction, which in turn impacts the efficiency of the new scanning method). For the same cases, the PSNR was shown to improve by up to 7.4dB and up to 4 dB, respectively. The new modes have yielded 5% improvement in BD-Rate over traditionally used modes, when run on K-Frame, which is expected to yield 1% of overall improvement.

Single-tooth anesthesia: pressure-sensing technology provides innovative advancement in the field of dental local anesthesia.

PubMed

Hochman, Mark N

2007-04-01

This article will review standard techniques for intraligamentary injection and describe the technology and technique behind a new single-tooth anesthesia system. This system and technique represents a technological advancement and a greater understanding of intraligamentary anesthesia.

[Recent advances of anastomosis techniques of esophagojejunostomy after laparoscopic totally gastrectomy in gastric tumor].

PubMed

Li, Xi; Ke, Chongwei

2015-05-01

The esophageal jejunum anastomosis of the digestive tract reconstruction techniques in laparoscopic total gastrectomy includes two categories: circular stapler anastomosis techniques and linear stapler anastomosis techniques. Circular stapler anastomosis techniques include manual anastomosis method, purse string instrument method, Hiki improved special anvil anastomosis technique, the transorally inserted anvil(OrVil(TM)) and reverse puncture device technique. Linear stapler anastomosis techniques include side to side anastomosis technique and Overlap side to side anastomosis technique. Esophageal jejunum anastomosis technique has a wide selection of different technologies with different strengths and the corresponding limitations. This article will introduce research progress of laparoscopic total gastrectomy esophagus jejunum anastomosis from both sides of the development of anastomosis technology and the selection of anastomosis technology.

Robotic surgery update.

PubMed

Jacobsen, G; Elli, F; Horgan, S

2004-08-01

Minimally invasive surgical techniques have revolutionized the field of surgery. Telesurgical manipulators (robots) and new information technologies strive to improve upon currently available minimally invasive techniques and create new possibilities. A retrospective review of all robotic cases at a single academic medical center from August 2000 until November 2002 was conducted. A comprehensive literature evaluation on robotic surgical technology was also performed. Robotic technology is safely and effectively being applied at our institution. Robotic and information technologies have improved upon minimally invasive surgical techniques and created new opportunities not attainable in open surgery. Robotic technology offers many benefits over traditional minimal access techniques and has been proven safe and effective. Further research is needed to better define the optimal application of this technology. Credentialing and educational requirements also need to be delineated.

An object oriented fully 3D tomography visual toolkit.

PubMed

Agostinelli, S; Paoli, G

2001-04-01

In this paper we present a modern object oriented component object model (COMM) C + + toolkit dedicated to fully 3D cone-beam tomography. The toolkit allows the display and visual manipulation of analytical phantoms, projection sets and volumetric data through a standard Windows graphical user interface. Data input/output is performed using proprietary file formats but import/export of industry standard file formats, including raw binary, Windows bitmap and AVI, ACR/NEMA DICOMM 3 and NCSA HDF is available. At the time of writing built-in implemented data manipulators include a basic phantom ray-tracer and a Matrox Genesis frame grabbing facility. A COMM plug-in interface is provided for user-defined custom backprojector algorithms: a simple Feldkamp ActiveX control, including source code, is provided as an example; our fast Feldkamp plug-in is also available.

Duchenne muscular dystrophy drugs face tough path to approval.

PubMed

Hodgkinson, L; Sorbera, L; Graul, A I

2016-03-01

Highly anticipated as new disease-modifying treatments for Duchenne muscular dystrophy (DMD), therapeutics by BioMarin Pharmaceutical (Kyndrisa™; drisapersen) and Sarepta Therapeutics (eteplirsen; AVI-4658) both recently received negative FDA reviews and are now facing battles for approval in the U.S. At present, BioMarin is committed to working with the FDA to forge a pathway to approval following the failure of its NDA, while Sarepta awaits the formal decision on its NDA, which is expected by late May 2016. Despite the critical nature of both reviews, analysts consider that there is still a narrow possibility of approval of both drugs. According to Consensus forecasts from Thomson Reuters Cortellis for Competitive Intelligence, Kyndrisa is forecast to achieve sales of USD 533.71 million in 2021. Copyright 2016 Prous Science, S.A.U. or its licensors. All rights reserved.

[Impact of digital technology on clinical practices: perspectives from surgery].

PubMed

Zhang, Y; Liu, X J

2016-04-09

Digital medical technologies or computer aided medical procedures, refer to imaging, 3D reconstruction, virtual design, 3D printing, navigation guided surgery and robotic assisted surgery techniques. These techniques are integrated into conventional surgical procedures to create new clinical protocols that are known as "digital surgical techniques". Conventional health care is characterized by subjective experiences, while digital medical technologies bring quantifiable information, transferable data, repeatable methods and predictable outcomes into clinical practices. Being integrated into clinical practice, digital techniques facilitate surgical care by improving outcomes and reducing risks. Digital techniques are becoming increasingly popular in trauma surgery, orthopedics, neurosurgery, plastic and reconstructive surgery, imaging and anatomic sciences. Robotic assisted surgery is also evolving and being applied in general surgery, cardiovascular surgery and orthopedic surgery. Rapid development of digital medical technologies is changing healthcare and clinical practices. It is therefore important for all clinicians to purposefully adapt to these technologies and improve their clinical outcomes.

Needed Actions within Defense Acquisitions Based on a Forecast of Future Mobile Information and Communications Technologies Deployed in Austere Environments

DTIC Science & Technology

2013-03-01

Deshmukh , and Vrat (2002) 30 performed an analysis to match forecasting techniques with specific technologies. In this study, the authors found...Technological Forecasting and Social Change, 79, 744-765. Mishra, S., Deshmukh , S., & Vrat, P. (2002). Matching of Technological Forecasting Technique to

The twin cell model and its excellence in determining the glass transition temperature of thin film metallic glass

NASA Astrophysics Data System (ADS)

Kanjilal, Baishali; Iram, Samreen; Das, Atreyee; Chakrabarti, Haimanti

2018-05-01

This work reports a novel two dimensional approach to the theoretical computation of the glass transition temperature in simple hypothetical icosahedral packed structures based on Thin Film metallic glasses using liquid state theories in the realm of transport properties. The model starts from Navier-Stokes equation and evaluates the statistical average velocity of each different species of atom under the condition of ensemble equality to compute diffusion lengths and the diffusion coefficients as a function of temperature. The additional correction brought in is that of the limited states due to tethering of one nodule vis -a-vis the others. The movement of the molecules use our Twin Cell Model a typical model pertinent for modeling chain motions. A temperature viscosity correction by Cohen and Grest is included through the temperature dependence of the relaxation times for glass formers.

Defining defect specifications to optimize photomask production and requalification

NASA Astrophysics Data System (ADS)

Fiekowsky, Peter

2006-10-01

Reducing defect repairs and accelerating defect analysis is becoming more important as the total cost of defect repairs on advanced masks increases. Photomask defect specs based on printability, as measured on AIMS microscopes has been used for years, but the fundamental defect spec is still the defect size, as measured on the photomask, requiring the repair of many unprintable defects. ADAS, the Automated Defect Analysis System from AVI is now available in most advanced mask shops. It makes the use of pure printability specs, or "Optimal Defect Specs" practical. This software uses advanced algorithms to eliminate false defects caused by approximations in the inspection algorithm, classify each defect, simulate each defect and disposition each defect based on its printability and location. This paper defines "optimal defect specs", explains why they are now practical and economic, gives a method of determining them and provides accuracy data.

No-signaling, perfect bipartite dichotomic correlations and local randomness

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seevinck, M. P.

2011-03-28

The no-signaling constraint on bi-partite correlations is reviewed. It is shown that in order to obtain non-trivial Bell-type inequalities that discern no-signaling correlations from more general ones, one must go beyond considering expectation values of products of observables only. A new set of nontrivial no-signaling inequalities is derived which have a remarkably close resemblance to the CHSH inequality, yet are fundamentally different. A set of inequalities by Roy and Singh and Avis et al., which is claimed to be useful for discerning no-signaling correlations, is shown to be trivially satisfied by any correlation whatsoever. Finally, using the set of newlymore » derived no-signaling inequalities a result with potential cryptographic consequences is proven: if different parties use identical devices, then, once they have perfect correlations at spacelike separation between dichotomic observables, they know that because of no-signaling the local marginals cannot but be completely random.« less

Prime Contract Awards Alphabetically by Contractor, by State or Country, and Place, FY 88. Part 4. (Burnside-Ott Avi. Training Ctr.-Colcom, Inc.)

DTIC Science & Technology

1988-01-01

AD-.A207 773 D DCMNAI 773I Form Approved DOCUMENTATION PAG . OMB No. 0704-0188 la . REPORT SECURITY CLASSIFICATION lb. RESIH CTIVE MARKINGS T1TneI1...CK00 dx co00 ~00 ~0w 06300-4 Iwo 6Ŕ L-4-0 W-4 W001 La IO000 W,4 wo woo WNCI wo WO00-4 I -JO -JO _300 -1.JW -.1N -acOO -a00 -JO _aOO -JO -J.O WO.J 3 0...30 300 I 3= I LA . I.. 0 1300 300I ( IlL. :40" IN (D 000 (0 -IN t-N PN00 NW) V Ch(0 N N0 WN NN- n 44൰cN N.o 0 0) WNal anW m&o W*00W 0)0 40 Nat 0)(to c

Exposure to an environment containing the aromatic red cedar, Juniperus virginiana: procarcinogenic, enzyme-inducing and insecticidal effects.

PubMed

Sabine, J R

1975-11-01

(1) Shavings from the Eastern Red Cedar (Juniperus virginiana) were examined for three diverse biological properties, i.e. enzyme induction, procarcinogenicity and insecticidal activity. (2) The ability of a cedar environment to stimulate liver drug-metabolizing enzymes in mice was confirmed by lowered values for barbiturate sleeping time. (3) In susceptible strains of mice (C3H-Avy, C3H-AvyfB and CBA/J) the use of cedar shavings as bedding increased significantly the incidence of spontaneous tumors of the liver and mammary gland, and also reduced the average time at which tumors appeared. (4) Cedar and some of its derivatives (Oil of Cedarwood, cedrene, cedrol) disrupted the reproductive and developmental cycle of a number of insects, including the Peanut Trash Bug (Elasmolomus sordidus), the Indian Meal Moth (Plodia interpunctella) and the Forage Mite (Tyrophagus putrescentiae).

Polymorphisms in TAS2R38 and the taste bud trophic factor, gustin gene co-operate in modulating PROP taste phenotype.

PubMed

Calò, Carla; Padiglia, Alessandra; Zonza, Andrea; Corrias, Laura; Contu, Paolo; Tepper, Beverly J; Barbarossa, Iole Tomassini

2011-10-24

The PROP taste phenotype varies greatly among individuals, influencing eating behavior and therefore may play a role in body composition. This variation is associated with polymorphisms in the bitter receptor gene TAS2R38 and the taste-bud trophic factor gustin gene. The aim of this study was to examine the relationship between TAS2R38 haplotypes and the gustin gene polymorphism rs2274333 in modulating PROP taste phenotype. PROP phenotype was determined in seventy-six volunteers (29 males, 47 females, age 25±3 y) by scaling methods and threshold measurements. TAS2R38 and gustin gene genotyping was performed using PCR techniques. The lowest responsiveness in PROP nontasters is strongly associated with the AVI nontasting TAS2R38 variant and the highest responsiveness in supertasters is strongly associated to allele A and genotype AA of the gustin gene. These data support the hypothesis that the greater sensitivity of supertasters could be mediated by a greater taste-bud density. Polymorphisms in TAS2R38 and gustin gene, together, accounted for up to 60% of the phenotypic variance in PROP bitterness and to 40% in threshold values. These data, suggest that other unidentified factors may be more relevant for detecting low concentrations of PROP. Moreover, the presence of the PAV variant receptor may be important for detecting high concentrations of PROP, whereas the presence of allele A in gustin polymorphism may be relevant for perceiving low concentrations. These data show how the combination of the TAS2R38 and gustin gene genotypes modulate PROP phenotype, providing an additional tool for the evaluation of human eating behavior and nutritional status. Copyright © 2011 Elsevier Inc. All rights reserved.

Development of a video tampering dataset for forensic investigation.

PubMed

Ismael Al-Sanjary, Omar; Ahmed, Ahmed Abdullah; Sulong, Ghazali

2016-09-01

Forgery is an act of modifying a document, product, image or video, among other media. Video tampering detection research requires an inclusive database of video modification. This paper aims to discuss a comprehensive proposal to create a dataset composed of modified videos for forensic investigation, in order to standardize existing techniques for detecting video tampering. The primary purpose of developing and designing this new video library is for usage in video forensics, which can be consciously associated with reliable verification using dynamic and static camera recognition. To the best of the author's knowledge, there exists no similar library among the research community. Videos were sourced from YouTube and by exploring social networking sites extensively by observing posted videos and rating their feedback. The video tampering dataset (VTD) comprises a total of 33 videos, divided among three categories in video tampering: (1) copy-move, (2) splicing, and (3) swapping-frames. Compared to existing datasets, this is a higher number of tampered videos, and with longer durations. The duration of every video is 16s, with a 1280×720 resolution, and a frame rate of 30 frames per second. Moreover, all videos possess the same formatting quality (720p(HD).avi). Both temporal and spatial video features were considered carefully during selection of the videos, and there exists complete information related to the doctored regions in every modified video in the VTD dataset. This database has been made publically available for research on splicing, Swapping frames, and copy-move tampering, and, as such, various video tampering detection issues with ground truth. The database has been utilised by many international researchers and groups of researchers. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

The AViKA (Adding Value in Knee Arthroplasty) postoperative care navigation trial: rationale and design features.

PubMed

Losina, Elena; Collins, Jamie E; Daigle, Meghan E; Donnell-Fink, Laurel A; Prokopetz, Julian J Z; Strnad, Doris; Lerner, Vladislav; Rome, Benjamin N; Ghazinouri, Roya; Skoniecki, Debra J; Katz, Jeffrey N; Wright, John

2013-10-12

Utilization of total knee arthroplasty is increasing rapidly. A substantial number of total knee arthroplasty recipients have persistent pain after surgery. Our objective was to design a randomized controlled trial to establish the efficacy of a motivational-interviewing-based telephone intervention aimed at improving patient outcomes and satisfaction following total knee arthroplasty. The study was conducted at Brigham and Women's Hospital in Boston, Massachusetts. The study focused on individuals 40 years or older with a primary diagnosis of osteoarthritis who were scheduled for total knee arthroplasty. The study compared two management strategies over the first six months postoperatively: 1) enhanced postoperative care with frequent follow-up by a care navigator; 2) usual postoperative care. Those who were randomized into the enhanced postoperative care arm received ten calls from a trained non-clinician care navigator over the first six postoperative months. The navigator used motivational interviewing techniques to engage patients in discussions related to their rehabilitation goals, including patient's plans for and confidence in achieving those goals. Patients in the usual care arm received standard postoperative management and received no navigator phone calls. Patients in both arms were assessed at baseline, three months, and six months postoperatively. The primary outcome of the study was improvement in function as measured by the difference in Western Ontario and McMaster Universities Osteoarthritis Index function score between preoperative (baseline) status and six months postoperatively. Data were collected to identify factors that may be related to total knee arthroplasty outcomes, including preoperative pain, pain catastrophizing, self-efficacy, and depression. A formal economic analysis is also planned to determine the cost-effectiveness of the care navigator as a component of total knee arthroplasty care. ClinicalTrials.gov NCT01540851.

Accomplishing the genotype-specific serodiagnosis of single and dual Trypanosoma cruzi infections by flow cytometry Chagas-Flow ATE-IgG2a.

PubMed

Alessio, Glaucia Diniz; de Araújo, Fernanda Fortes; Sales Júnior, Policarpo Ademar; Gomes, Matheus de Souza; Amaral, Laurence Rodrigues do; Pascoal Xavier, Marcelo Antônio; Teixeira-Carvalho, Andréa; de Lana, Marta; Martins-Filho, Olindo Assis

2018-02-01

The methods currently available for genotype-specific diagnosis of T. cruzi infection still present relevant limitations, especially to identify mixed infection. In the present investigation, we have evaluated the performance of Chagas-Flow ATE-IgG2a test for early and late differential diagnosis of single and dual genotype-specific T. cruzi infections. Serum samples from Swiss mice at early and late stages of T. cruzi infection were assayed in parallel batches for genotype-specific diagnosis of single (TcI, TcVI or TcII) and dual (TcI+TcVI, TcVI+TcII or TcII+TcI) infections. The intrinsic reactivity to TcI, TcVI and TcII target antigens, including amastigote (AI/AVI/AII), trypomastigote-(TI/TVI/TII) and epimastigote (EI/EVI/EII), at specific reverse of serum dilutions (500 to 64,000), was employed to provide reliable decision-trees for "early" vs "late", "single vs "dual" and "genotype-specific" serology. The results demonstrated that selective set of attributes "EII 500/EI 2,000/AII 500" were able to provide high-quality accuracy (81%) to segregate early and late stages of T. cruzi infection. The sets "TI 2,000/AI 1,000/EII 1,000" and "TI 8,000/AII 32,000" presented expressive scores to discriminate single from dual T. cruzi infections at early (85%) and late stages (84%), respectively. Moreover, the attributes "TI 4,000/TVI 500/TII 1,000", "TI 16,000/EI 2,000/EII 2,000/AI 500/TVI 500" showed good performance for genotype-specific diagnosis at early stage of single (72%) and dual (80%) T. cruzi infections, respectively. In addition, the attributes "TI 4,000/AII 1,000/EVI 1,000", "TI 64,000/AVI 500/AI 2,000/AII 1,000/EII 4,000" showed moderate performance for genotype-specific diagnosis at late stage of single (69%) and dual (76%) T. cruzi infections, respectively. The sets of decision-trees were assembled to construct a sequential algorithm with expressive accuracy (81%) for serological diagnosis of T. cruzi infection. These findings engender new perspectives for the application of Chagas-Flow ATE-IgG2a method for genotype-specific diagnosis in humans, with relevant contributions for epidemiological surveys as well as clinical and post-therapeutic monitoring of Chagas disease.

Working hours associated with unintentional sleep at work among airline pilots.

PubMed

Marqueze, Elaine Cristina; Nicola, Ana Carolina B; Diniz, Dag Hammarskjoeld M D; Fischer, Frida Marina

2017-06-26

Tto identify factors associated with unintentional sleep at work of airline pilots. This is a cross-sectional epidemiological study conducted with 1,235 Brazilian airline pilots, who work national or international flights. Data collection has been performed online. We carried out a bivariate and multiple logistic regression analysis, having as dependent variable unintentional sleep at work. The independent variables were related to biodemographic data, characteristics of the work, lifestyle, and aspects of sleep. The prevalence of unintentional sleep while flying the airplane was 57.8%. The factors associated with unintentional sleep at work were: flying for more than 65 hours a month, frequent technical delays, greater need for recovery after work, work ability below optimal, insufficient sleep, and excessive sleepiness. The occurrence of unintentional sleep at work of airline pilots is associated with factors related to the organization of the work and health. Identificar fatores associados aos cochilos não intencionais durante as jornadas de trabalho de pilotos da aviação regular. Estudo epidemiológico transversal conduzido com 1.235 pilotos brasileiros de avião do transporte aéreo regular, que realizavam voos nacionais ou internacionais, sendo a coleta de dados realizada on-line. Foi realizada análise de regressão logística bivariada e múltipla, tendo como variável dependente o cochilo não intencional durante o horário de trabalho. As variáveis independentes foram relacionadas a dados biodemográficos, características do trabalho, estilo de vida e aspectos do sono. A prevalência do cochilo não intencional enquanto pilotava o avião foi de 57,8%. Os fatores associados ao cochilo não intencional foram: voar por mais de 65 horas por mês, atrasos técnicos frequentes, maior necessidade de recuperação após o trabalho, capacidade para o trabalho inferior à ótima, sono insuficiente e sonolência excessiva. A ocorrência do cochilo não intencional durante a jornada de trabalho de pilotos da aviação regular está associada a fatores relacionados à organização do trabalho e à saúde.

The effectiveness and user perception of 3-dimensional digital human anatomy in an online undergraduate anatomy laboratory

NASA Astrophysics Data System (ADS)

Hilbelink, Amy Joanne

2007-12-01

The primary purpose of this study was to determine the effectiveness of implementing desktop 3-dimensional (3D) stereo images of human anatomy into an undergraduate human anatomy distance laboratory. User perceptions of 2D and 3D images were gathered via questionnaire in order to determine ease of use and level of satisfaction associated with the 3D software in the online learning environment. Mayer's (2001, p. 184) principles of design were used to develop the study materials that consisted of PowerPoint presentations and AVI files accessed via Blackboard. The research design employed a mixed-methods approach. Volunteers each were administered a demographic survey and were then stratified into groups based upon pre-test scores. A total sample size of 62 pairs was available for combined data analysis. Quantitative research questions regarding the effectiveness of 2D versus the 3D treatment were analyzed using a doubly-multivariate repeated measures (Doubly-MANOVA) design. Paired test scores achieved by undergraduates on a laboratory practical of identification and spatial relationships of the bones and features of a human skull were used in the analysis. The questionnaire designed to gather user perceptions consisted of quantitative and qualitative questions. Response frequencies were analyzed for the two groups and common themes were noted. Results revealed a statistically significant difference in group means for the main effect of the treatment groups 2D and 3D and for the variables of identification and relationship with the 3D group outperforming the 2D group on both dependent variables. Effect sizes were determined to be small, 0.215 for the identification variable and 0.359 for the relationship variable. Overall, all students liked the convenience of using PowerPoint and AVI files online. The 3D group felt their PowerPoint was more realistic than did the 2D group and both groups appreciated the detailed labeling of the online images. One third of the volunteers in the 3D group indicated that "eye strain" was what they liked least about working with the 3D images. Results indicate that desktop, stereo imaging may be incorporated effectively into online anatomy and physiology courses, but that more work needs to be done to ensure less eye strain.

Comparison of Traditional and Innovative Techniques to Solve Technical Challenges

NASA Technical Reports Server (NTRS)

Perchonok, Michele

2011-01-01

This slide presentation reviews the use of traditional and innovative techniques to solve technical challenges in food storage technology. The planning for a mission to Mars is underway, and the food storage technology improvements requires that improvements be made. This new technology is required, because current food storage technology is inadequate,refrigerators or freezers are not available for food preservation, and that a shelf life of 5 years is expected. A 10 year effort to improve food packaging technology has not enhanced significantly food packaging capabilities. Two innovation techniques were attempted InnoCentive and Yet2.com and have provided good results, and are still under due diligence for solver verification.

Advanced digital modulation: Communication techniques and monolithic GaAs technology

NASA Technical Reports Server (NTRS)

Wilson, S. G.; Oliver, J. D., Jr.; Kot, R. C.; Richards, C. R.

1983-01-01

Communications theory and practice are merged with state-of-the-art technology in IC fabrication, especially monolithic GaAs technology, to examine the general feasibility of a number of advanced technology digital transmission systems. Satellite-channel models with (1) superior throughput, perhaps 2 Gbps; (2) attractive weight and cost; and (3) high RF power and spectrum efficiency are discussed. Transmission techniques possessing reasonably simple architectures capable of monolithic fabrication at high speeds were surveyed. This included a review of amplitude/phase shift keying (APSK) techniques and the continuous-phase-modulation (CPM) methods, of which MSK represents the simplest case.

The Use of Behavior Change Techniques and Theory in Technologies for Cardiovascular Disease Prevention and Treatment in Adults: A Comprehensive Review

PubMed Central

Winter, Sandra J; Sheats, Jylana L; King, Abby C

2016-01-01

This review examined the use of health behavior change techniques and theory in technology-enabled interventions targeting risk factors and indicators for cardiovascular disease (CVD) prevention and treatment. Articles targeting physical activity, weight loss, smoking cessation and management of hypertension, lipids and blood glucose were sourced from PubMed (November 2010-2015) and coded for use of 1) technology, 2) health behavior change techniques (using the CALO-RE taxonomy), and 3) health behavior theories. Of the 984 articles reviewed, 304 were relevant (240=intervention, 64=review). Twenty-two different technologies were used (M=1.45, SD=+/−0.719). The most frequently used behavior change techniques were self-monitoring and feedback on performance (M=5.4, SD=+/−2.9). Half (52%) of the intervention studies named a theory/model - most frequently Social Cognitive Theory, the Trans-theoretical Model, and the Theory of Planned Behavior/Reasoned Action. To optimize technology-enabled interventions targeting CVD risk factors, integrated behavior change theories that incorporate a variety of evidence-based health behavior change techniques are needed. PMID:26902519

Assessment of three-dimensional high-definition visualization technology to perform microvascular anastomosis.

PubMed

Wong, Alex K; Davis, Gabrielle B; Nguyen, T JoAnna; Hui, Kenneth J W S; Hwang, Brian H; Chan, Linda S; Zhou, Zhao; Schooler, Wesley G; Chandrasekhar, Bala S; Urata, Mark M

2014-07-01

Traditional visualization techniques in microsurgery require strict positioning in order to maintain the field of visualization. However, static posturing over time may lead to musculoskeletal strain and injury. Three-dimensional high-definition (3DHD) visualization technology may be a useful adjunct to limiting static posturing and improving ergonomics in microsurgery. In this study, we aimed to investigate the benefits of using the 3DHD technology over traditional techniques. A total of 14 volunteers consisting of novice and experienced microsurgeons performed femoral anastomoses on male Sprague-Dawley retired breeder rats using traditional techniques as well as the 3DHD technology and compared the two techniques. Participants subsequently completed a questionnaire regarding their preference in terms of operational parameters, ergonomics, overall quality, and educational benefits. Efficiency was also evaluated by mean times to complete the anastomosis with each technique. A total of 27 anastomoses were performed, 14 of 14 using the traditional microscope and 13 of 14 using the 3DHD technology. Preference toward the traditional modality was noted with respect to the parameters of precision, field adjustments, zoom and focus, depth perception, and overall quality. The 3DHD technique was preferred for improved stamina and less back and eye strain. Participants believed that the 3DHD technique was the better method for learning microsurgery. Longer mean time of anastomosis completion was noted in participants utilizing the 3DHD technique. The 3DHD technology may prove to be valuable in improving proper ergonomics in microsurgery. In addition, it may be useful in medical education when applied to the learning of new microsurgical skills. More studies are warranted to determine its efficacy and safety in a clinical setting. Copyright © 2014 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sutton, M.; Zhao, P.

2016-03-24

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energymore » Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.« less

THE TECHNOLOGY OF TEACHING. THE CENTURY PSYCHOLOGY SERIES.

ERIC Educational Resources Information Center

SKINNER, B.F.

TEACHING AS A TECHNOLOGY IS THE ARRANGEMENT OF CONTINGENCIES OF REINFORCEMENT UNDER WHICH BEHAVIOR CHANGES. RECENT ADVANCES IN TECHNIQUES OF BEHAVIOR CONTROL HAVE MADE SUCH A TECHNOLOGY IMMANENT, BUT THERE IS A SHOCKING LACK OF APPLICATION OF THESE TECHNIQUES. INSTEAD, TEACHING CONTINUES TO RELY HEAVILY ON AVERSIVE CONTROL FOR MOTIVATION AND TO…

[Progress in imaging techniques].

PubMed

Mishima, Kazuaki; Otsuka, Tsukasa

2013-05-01

Today it is common to perform real-time diagnosis and treatment via live broadcast as a method of education and to spread new technology for diagnosis and therapy in medical fields. Live medical broadcasts have developed along with broadcast technology. In the early days, live video feeds were sent from operating rooms to classrooms and lecture halls in universities and hospitals. However, the development of imaging techniques and communication networks enabled live broadcasts that bi-directionally link operating rooms and meeting halls during scientific meetings and live demonstration courses. Live broadcasts therefore became an important method for education and the dissemination of new medical technologies. The development of imaging techniques has contributed to more realistic live broadcasts through such innovative techniques as three-dimensional viewing and higher-definition 4K technology. In the future, live broadcasts will be transmitted on personal computers using regular Internet connections. In addition to the enhancement of image delivery technology, it will also be necessary to examine the entire image delivery environment carefully, including issues of security and privacy of personal information.

Radical nursing and the emergence of technique as healthcare technology.

PubMed

Barnard, Alan

2016-01-01

The integration of technology in care is core business in nursing and this role requires that we must understand and use technology informed by evidence that goes much deeper and broader than actions and behaviours. We need to delve more deeply into its complexity because there is nothing minor or insignificant about technology as a major influence in healthcare outcomes and experiences. Evidence is needed that addresses technology and nursing from perspectives that examine the effects of technology, especially related to increasing demands for efficiency, the relationship of technology to nursing and caring, and a range of philosophical questions associated with empowering people in their healthcare choices. Specifically, there is a need to confront in practice the ways technique influences care. Technique is the creation of a kind of thinking that is necessary for contemporary healthcare technology to develop and be applied in an efficient and rational manner. Technique is not an entity or specific thing, but rather a way of thinking that seeks to shape and organize nursing activity, and manage efficiently individual difference(s) in care. It emphasizes predetermined causal relationships, conformity, and sameness of product, process, and thought. In response is needed a radical vision of nursing that attempts in a real sense to ensure we meet the needs of individuals and their community. Activism and advocacy are needed, and a willingness to create a certain detachment from the imperatives that technique demands. It is argued that our responsibility as nurses is to respond in practice to the errors, advantages, difficulties, and temptations of technology for the benefit of those who most need our assistance and care. © 2015 John Wiley & Sons Ltd.

Digital Technology in the Tertiary Dance Technique Studio: Expanding Student Engagement through Collaborative and Co-Creative Experiences

ERIC Educational Resources Information Center

Huddy, Avril

2017-01-01

Digital technology has long been integrated into the mainstream learning environment in a variety of ways from basic teaching delivery tools to specific courseware; however, it has struggled to make an impact in the dance technique studio. Despite the enthusiastic and alacritous integration of digital technologies within the repertoire and…

Systems Security Engineering

DTIC Science & Technology

2010-08-22

Commission (IEC). “Information technology — Security techniques — Code of practice for information security management ( ISO /IEC 27002 ...Information technology — Security techniques — Information security management systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security...was a draft ISO standard on Systems and software engineering, Systems and software assurance [18]. Created by systems engineers for systems

The Use of Behavior Change Techniques and Theory in Technologies for Cardiovascular Disease Prevention and Treatment in Adults: A Comprehensive Review.

PubMed

Winter, Sandra J; Sheats, Jylana L; King, Abby C

2016-01-01

This review examined the use of health behavior change techniques and theory in technology-enabled interventions targeting risk factors and indicators for cardiovascular disease (CVD) prevention and treatment. Articles targeting physical activity, weight loss, smoking cessation and management of hypertension, lipids and blood glucose were sourced from PubMed (November 2010-2015) and coded for use of 1) technology, 2) health behavior change techniques (using the CALO-RE taxonomy), and 3) health behavior theories. Of the 984 articles reviewed, 304 were relevant (240=intervention, 64=review). Twenty-two different technologies were used (M=1.45, SD=+/-0.719). The most frequently used behavior change techniques were self-monitoring and feedback on performance (M=5.4, SD=+/-2.9). Half (52%) of the intervention studies named a theory/model - most frequently Social Cognitive Theory, the Trans-theoretical Model, and the Theory of Planned Behavior/Reasoned Action. To optimize technology-enabled interventions targeting CVD risk factors, integrated behavior change theories that incorporate a variety of evidence-based health behavior change techniques are needed. Copyright © 2016 Elsevier Inc. All rights reserved.

Techniques and recommendations for the inclusion of users with autism in the design of assistive technologies.

PubMed

Francis, Peter; Mellor, David; Firth, Lucy

2009-01-01

The increasing numbers of technology platforms offer opportunities to develop new visual assistive aids for people with autism. However, their involvement in the design of such aids is critical to their short-term uptake and longer term use. Using a three-round Delphi study involving seven Australian psychologists specializing in treating people with autism, the authors explored the utility of four techniques that might be implemented to involve users with autism in the design process. The authors found that individual users from the target group would be likely to respond differently to the techniques and that no technique was clearly better than any other. Recommendations for using these techniques to involve individuals with autism in the design of assistive technologies are suggested.

Technical Progress: Three Ways to Keep Up.

ERIC Educational Resources Information Center

Patterson, J. Wayne; And Others

1988-01-01

The authors analyzed three techniques employed in technological forecasting: (1) brainstorming, (2) extrapolation, and (3) scenario writing. They argue that these techniques have value to practitioners, particularly managers, who are often affected by technological change. (CH)

Diagnostic Radiology--The Impact of New Technology.

ERIC Educational Resources Information Center

Harrison, R. M.

1989-01-01

Discussed are technological advances applying computer techniques for image acquisition and processing, including digital radiography, computed tomography, and nuclear magnetic resonance imaging. Several diagrams and pictures showing the use of each technique are presented. (YP)

Groundwork for the Concept of Technique in Education: Herbert Marcuse and Technological Society

ERIC Educational Resources Information Center

Pierce, Clayton

2006-01-01

This article articulates the groundwork for a new understanding of the concept of technique through a critical engagement with Herbert Marcuse's critical theory of technology. To this end, it identifies and engages three expressions of technique in Marcuse's work: mimesis, reified labor, and the happy consciousness. It is argued that this mapping…

[Technological innovations in radiation oncology require specific quality controls].

PubMed

Lenaerts, E; Mathot, M

2014-01-01

During the last decade, the field of radiotherapy has benefited from major technological innovations and continuously improving treatment efficacy, comfort and safety of patients. This mainly concerns the imaging techniques that allow 4D CT scan recording the respiratory phases, on-board imaging on linear accelerators that ensure perfect positioning of the patient for treatment and irradiation techniques that reduce very significantly the duration of treatment sessions without compromising quality of the treatment plan, including IMRT (Intensity Modulated Radiation Therapy) and VMAT (Volumetric Modulated Arc therapy). In this context of rapid technological change, it is the responsibility of medical physicists to regularly and precisely monitor the perfect functioning of new techniques to ensure patient safety. This requires the use of specific quality control equipment best suited to these new techniques. We will briefly describe the measurement system Delta4 used to control individualized treatment plan for each patient treated with VMAT technology.

Canadian regulatory perspectives on genome engineered crops

PubMed Central

Smyth, Stuart J.

2017-01-01

ABSTRACT New breeding techniques in plant agriculture exploded upon the scene about two years ago, in 2014. While these innovative plant breeding techniques, soon to be led by CRISPR/Cas9, initially appear to hold tremendous promise for plant breeding, if not a revolution for the industry, the question of how the products of these technologies will be regulated is rapidly becoming a key aspect of the technology's future potential. Regulation of innovative technologies and products has always lagged that of the science, but in the past decade, regulatory systems in many jurisdictions have become gridlocked as they try to regulate genetically modified (GM) crops. This regulatory incapability to efficiently assess and approve innovative new agricultural products is particularly important for new plant breeding techniques as if these techniques are classified as genetically modified breeding techniques, then their acceptance and future will diminish considerably as they will be rejected by the European Union. Conversely, if the techniques are accepted as conventional plant breeding, then the future is blindingly bright. This article examines the international debate about the regulation of new plant breeding techniques and then assesses how the Canadian regulatory system has approached the regulation of these technologies through two more public product approvals, GM apples and GM potatoes, then discusses other crop variety approval and those in the regulatory pipeline. PMID:27858499

Demonstration of a Probabilistic Technique for the Determination of Economic Viability of Very Large Transport Configurations

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.

1998-01-01

Over the past few years, modem aircraft design has experienced a paradigm shift from designing for performance to designing for affordability. This report contains a probabilistic approach that will allow traditional deterministic design methods to be extended to account for disciplinary, economic, and technological uncertainty. The probabilistic approach was facilitated by the Fast Probability Integration (FPI) technique; a technique which allows the designer to gather valuable information about the vehicle's behavior in the design space. This technique is efficient for assessing multi-attribute, multi-constraint problems in a more realistic fashion. For implementation purposes, this technique is applied to illustrate how both economic and technological uncertainty associated with a Very Large Transport aircraft concept may be assessed. The assessment is evaluated with the FPI technique to determine the cumulative probability distributions of the design space, as bound by economic objectives and performance constraints. These distributions were compared to established targets for a comparable large capacity aircraft, similar in size to the Boeing 747-400. The conventional baseline configuration design space was determined to be unfeasible and marginally viable, motivating the infusion of advanced technologies, including reductions in drag, specific fuel consumption, wing weight, and Research, Development, Testing, and Evaluation costs. The resulting system design space was qualitatively assessed with technology metric "k" factors. The infusion of technologies shifted the VLT design into regions of feasibility and greater viability. The study also demonstrated a method and relationship by which the impact of new technologies may be assessed in a more system focused approach.

Innovation in surgical technology and techniques: Challenges and ethical issues.

PubMed

Geiger, James D; Hirschl, Ronald B

2015-06-01

The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

Cables and connectors: A compilation

NASA Technical Reports Server (NTRS)

1974-01-01

A technological compilation on devices and techniques for various types of electrical cables and connections is presented. Data are reported under three sections: flat conductor cable technology, newly developed electrical connectors, and miscellaneous articles and information on cables and connector techniques.

A host-specific biological control of grape crown gall by Agrobacterium vitis strain F2/5: its regulation and population dynamics.

PubMed

Kaewnum, Supaporn; Zheng, Desen; Reid, Cheryl L; Johnson, Kameka L; Gee, Jodi C; Burr, Thomas J

2013-05-01

Nontumorigenic Agrobacterium vitis strain F2/5 is able to prevent crown gall caused by tumorigenic A. vitis on grape but not on other plant species such as tobacco. Mutations in a quorum-sensing transcription factor, aviR, and in caseinolytic protease (clp) component genes clpA and clpP1 resulted in reduced or loss of biological control. All mutants were complemented; however, restoration of biological control by complemented clpA and clpP1 mutants was dependent on the copy number of vector that was used as well as timing of application of the complemented mutants to grape wounds in relation to inoculation with pathogen. Mutations in other quorum-sensing and clp genes and in a gene associated with polyketide synthesis did not affect biological control. It was determined that, although F2/5 inhibits transformation by tumorigenic A. vitis strains on grape, it does not affect growth of the pathogen in wounded grape tissue over time.

Aptamer-phage reporters for ultrasensitive lateral flow assays

PubMed Central

Adhikari, Meena; Strych, Ulrich; Kim, Jinsu; Goux, Heather; Dhamane, Sagar; Poongavanam, Mohan-Vivekanandan; Hagström, Anna E. V.; Kourentzi, Katerina; Conrad, Jacinta C.; Willson, Richard C.

2015-01-01

We introduce the modification of bacteriophage particles with aptamers for the use as bioanalytical reporters, and demonstrate the use of these particles in ultrasensitive lateral flow assays. M13 phage displaying an in vivo biotinylatable peptide (AviTag) genetically fused to the phage tail protein pIII were used as reporter particle scaffolds, with biotinylated aptamers attached via avidin-biotin linkages, and horseradish peroxidase (HRP) reporter enzymes covalently attached to the pVIII coat protein. These modified viral nanoparticles were used in immunochromatographic sandwich assays for the direct detection of IgE and of the penicillin-binding protein from Staphylococcus aureus (PBP2a). We also developed an additional lateral flow assay for IgE, in which the analyte is sandwiched between immobilized anti-IgE antibodies and aptamer-bearing reporter phage modified with HRP. The limit of detection of this LFA was 0.13 ng/mL IgE, ~100 times lower than those of previously reported IgE assays. PMID:26456715

Aptamer-Phage Reporters for Ultrasensitive Lateral Flow Assays.

PubMed

Adhikari, Meena; Strych, Ulrich; Kim, Jinsu; Goux, Heather; Dhamane, Sagar; Poongavanam, Mohan-Vivekanandan; Hagström, Anna E V; Kourentzi, Katerina; Conrad, Jacinta C; Willson, Richard C

2015-12-01

We introduce the modification of bacteriophage particles with aptamers for use as bioanalytical reporters, and demonstrate the use of these particles in ultrasensitive lateral flow assays. M13 phage displaying an in vivo biotinylatable peptide (AviTag) genetically fused to the phage tail protein pIII were used as reporter particle scaffolds, with biotinylated aptamers attached via avidin-biotin linkages, and horseradish peroxidase (HRP) reporter enzymes covalently attached to the pVIII coat protein. These modified viral nanoparticles were used in immunochromatographic sandwich assays for the direct detection of IgE and of the penicillin-binding protein from Staphylococcus aureus (PBP2a). We also developed an additional lateral flow assay for IgE, in which the analyte is sandwiched between immobilized anti-IgE antibodies and aptamer-bearing reporter phage modified with HRP. The limit of detection of this LFA was 0.13 ng/mL IgE, ∼100 times lower than those of previously reported IgE assays.

Preliminary assessment of contaminants in the sediment and organisms of the Swartkops Estuary, South Africa.

PubMed

Nel, L; Strydom, N A; Bouwman, H

2015-12-30

Urban estuaries are susceptible to metal and organic pollution, yet most remain understudied in South Africa with respect to the presence, concentrations and distribution of contaminants. Metal and organic chemical concentrations were assessed in sediment and organisms from different trophic levels in the lower reaches of the Swartkops Estuary. Species sampled included Upogebia africana (Malacostraca: Upogebiidae), Gilchristella aestuaria (Clupeidae), Psammogobius knysnaensis (Gobiidae), Mugil cephalus (Mugilidae), Lichia amia (Carangidae), Argyrosomus japonicus (Sciaenidae), Pomadasys commersonnii (Haemulidae) and Larus dominicanus (Avis: Laridae). This study is one of the most comprehensive studies to date assessing pollution levels in a food web in estuaries in South Africa. Due to biomagnification, higher concentrations of Arsenic, Lead, Mercury and Cadmium were found in the juveniles stages of popular angling fishes. High concentrations of Cadmium and Arsenic were recorded in the liver of L. amia, A. japonicus and P. commersonnii which exceed international quality food guidelines. Eggs from the gull, L. dominicanus, showed detectable concentrations of PCBs. Copyright © 2015 Elsevier Ltd. All rights reserved.

Recent Advances in Measurement and Dietary Mitigation of Enteric Methane Emissions in Ruminants

PubMed Central

Patra, Amlan K.

2016-01-01

Methane (CH4) emission, which is mainly produced during normal fermentation of feeds by the rumen microorganisms, represents a major contributor to the greenhouse gas (GHG) emissions. Several enteric CH4 mitigation technologies have been explored recently. A number of new techniques have also been developed and existing techniques have been improved in order to evaluate CH4 mitigation technologies and prepare an inventory of GHG emissions precisely. The aim of this review is to discuss different CH4 measuring and mitigation technologies, which have been recently developed. Respiration chamber technique is still considered as a gold standard technique due to its greater precision and reproducibility in CH4 measurements. With the adoption of recent recommendations for improving the technique, the SF6 method can be used with a high level of precision similar to the chamber technique. Short-term measurement techniques of CH4 measurements generally invite considerable within- and between-animal variations. Among the short-term measuring techniques, Greenfeed and methane hood systems are likely more suitable for evaluation of CH4 mitigation studies, if measurements could be obtained at different times of the day relative to the diurnal cycle of the CH4 production. Carbon dioxide and CH4 ratio, sniffer, and other short-term breath analysis techniques are more suitable for on farm screening of large number of animals to generate the data of low CH4-producing animals for genetic selection purposes. Different indirect measuring techniques are also investigated in recent years. Several new dietary CH4 mitigation technologies have been explored, but only a few of them are practical and cost-effective. Future research should be directed toward both the medium- and long-term mitigation strategies, which could be utilized on farms to accomplish substantial reductions of CH4 emissions and to profitably reduce carbon footprint of livestock production systems. This review presents recent developments and critical analysis on different measurements and dietary mitigation of enteric CH4 emissions technologies. PMID:27243027

Recent Advances in Measurement and Dietary Mitigation of Enteric Methane Emissions in Ruminants.

PubMed

Patra, Amlan K

2016-01-01

Methane (CH4) emission, which is mainly produced during normal fermentation of feeds by the rumen microorganisms, represents a major contributor to the greenhouse gas (GHG) emissions. Several enteric CH4 mitigation technologies have been explored recently. A number of new techniques have also been developed and existing techniques have been improved in order to evaluate CH4 mitigation technologies and prepare an inventory of GHG emissions precisely. The aim of this review is to discuss different CH4 measuring and mitigation technologies, which have been recently developed. Respiration chamber technique is still considered as a gold standard technique due to its greater precision and reproducibility in CH4 measurements. With the adoption of recent recommendations for improving the technique, the SF6 method can be used with a high level of precision similar to the chamber technique. Short-term measurement techniques of CH4 measurements generally invite considerable within- and between-animal variations. Among the short-term measuring techniques, Greenfeed and methane hood systems are likely more suitable for evaluation of CH4 mitigation studies, if measurements could be obtained at different times of the day relative to the diurnal cycle of the CH4 production. Carbon dioxide and CH4 ratio, sniffer, and other short-term breath analysis techniques are more suitable for on farm screening of large number of animals to generate the data of low CH4-producing animals for genetic selection purposes. Different indirect measuring techniques are also investigated in recent years. Several new dietary CH4 mitigation technologies have been explored, but only a few of them are practical and cost-effective. Future research should be directed toward both the medium- and long-term mitigation strategies, which could be utilized on farms to accomplish substantial reductions of CH4 emissions and to profitably reduce carbon footprint of livestock production systems. This review presents recent developments and critical analysis on different measurements and dietary mitigation of enteric CH4 emissions technologies.

Optimization of CMOS image sensor utilizing variable temporal multisampling partial transfer technique to achieve full-frame high dynamic range with superior low light and stop motion capability

NASA Astrophysics Data System (ADS)

Kabir, Salman; Smith, Craig; Armstrong, Frank; Barnard, Gerrit; Schneider, Alex; Guidash, Michael; Vogelsang, Thomas; Endsley, Jay

2018-03-01

Differential binary pixel technology is a threshold-based timing, readout, and image reconstruction method that utilizes the subframe partial charge transfer technique in a standard four-transistor (4T) pixel CMOS image sensor to achieve a high dynamic range video with stop motion. This technology improves low light signal-to-noise ratio (SNR) by up to 21 dB. The method is verified in silicon using a Taiwan Semiconductor Manufacturing Company's 65 nm 1.1 μm pixel technology 1 megapixel test chip array and is compared with a traditional 4 × oversampling technique using full charge transfer to show low light SNR superiority of the presented technology.

[Application of DNA labeling technology in forensic botany].

PubMed

Znang, Xian; Li, Jing-Lin; Zhang, Xiang-Yu

2008-12-01

Forensic botany is a study of judicial plant evidence. Recently, researches on DNA labeling technology have been a mainstream of forensic botany. The article systematically reviews various types of DNA labeling techniques in forensic botany with enumerated practical cases, as well as the potential forensic application of each individual technique. The advantages of the DNA labeling technology over traditional morphological taxonomic methods are also summarized.

Aeroacoustic Research Techniques: Jets to Autos

NASA Technical Reports Server (NTRS)

Soderman, Paul T.

1999-01-01

Aeroacoustic research has benefited from the development of advanced techniques for the study of fluid mechanically generated noise New instrumentation; methodologies, information technologies, and facilities have evolved to help researchers investigate the complexities of aircraft and automobile noise. In this paper, research techniques are reviewed with emphasis on the subject closest to the author s experience: aircraft propulsion and airframe noise in simulated flight. A new technology developed for the study of aircraft airframe noise is described as a potential tool for the study of automobile noise. The important role of information technology in aeroacoustic research is discussed.

Shock and vibration technology with applications to electrical systems

NASA Technical Reports Server (NTRS)

Eshleman, R. L.

1972-01-01

A survey is presented of shock and vibration technology for electrical systems developed by the aerospace programs. The shock environment is surveyed along with new techniques for modeling, computer simulation, damping, and response analysis. Design techniques based on the use of analog computers, shock spectra, optimization, and nonlinear isolation are discussed. Shock mounting of rotors for performance and survival, and vibration isolation techniques are reviewed.

Micro/nano-fabrication technologies for cell biology.

PubMed

Qian, Tongcheng; Wang, Yingxiao

2010-10-01

Micro/nano-fabrication techniques, such as soft lithography and electrospinning, have been well-developed and widely applied in many research fields in the past decade. Due to the low costs and simple procedures, these techniques have become important and popular for biological studies. In this review, we focus on the studies integrating micro/nano-fabrication work to elucidate the molecular mechanism of signaling transduction in cell biology. We first describe different micro/nano-fabrication technologies, including techniques generating three-dimensional scaffolds for tissue engineering. We then introduce the application of these technologies in manipulating the physical or chemical micro/nano-environment to regulate the cellular behavior and response, such as cell life and death, differentiation, proliferation, and cell migration. Recent advancement in integrating the micro/nano-technologies and live cell imaging are also discussed. Finally, potential schemes in cell biology involving micro/nano-fabrication technologies are proposed to provide perspectives on the future research activities.

Micro/nano-fabrication technologies for cell biology

PubMed Central

Qian, Tongcheng

2012-01-01

Micro/nano-fabrication techniques, such as soft lithography and electrospinning, have been well-developed and widely applied in many research fields in the past decade. Due to the low costs and simple procedures, these techniques have become important and popular for biological studies. In this review, we focus on the studies integrating micro/nano-fabrication work to elucidate the molecular mechanism of signaling transduction in cell biology. We first describe different micro/nano-fabrication technologies, including techniques generating three-dimensional scaffolds for tissue engineering. We then introduce the application of these technologies in manipulating the physical or chemical micro/nano-environment to regulate the cellular behavior and response, such as cell life and death, differentiation, proliferation, and cell migration. Recent advancement in integrating the micro/nano-technologies and live cell imaging are also discussed. Finally, potential schemes in cell biology involving micro/nano-fabrication technologies are proposed to provide perspectives on the future research activities. PMID:20490938

Wood Technology: Techniques, Processes, and Products

ERIC Educational Resources Information Center

Oatman, Olan

1975-01-01

Seven areas of wood technology illustrates applicable techniques, processes, and products for an industrial arts woodworking curriculum. They are: wood lamination; PEG (polyethylene glycol) diffusion processes; wood flour and/or particle molding; production product of industry; WPC (wood-plastic-composition) process; residential construction; and…

Technologies Old and New: Teaching Ancient Navigation.

ERIC Educational Resources Information Center

Spalding, Simon

1995-01-01

One educator presents maritime history to students using technologies available to ancient seafarers. Techniques include dead reckoning, the sandglass, the magnetic compass, celestial navigation, and various navigation techniques of precontact Polynesia that depended upon oral transmission of knowledge. The paper notes differences between…

Emerging technologies and procedures: results of an online survey and real-time poll.

PubMed

Verma, Richa; Eid, George; Ali, Mohamed; Saber, Alan; Pryor, Aurora D

2015-01-01

Many new techniques and bariatric endoluminal procedures are being developed and used for the treatment of obesity. Clear guidelines or opinions of the new techniques are not readily available. The aim of this study was to gauge the level of interest and opinions of bariatric surgeons regarding these new techniques, using online and real poll surveys. The American Society for Metabolic and Bariatric Surgery (ASMBS) Emerging Technologies committee developed a questionnaire that was distributed among the membership and conducted a live poll of attendees at Obesity Week 2013. Opinions of new technologies and techniques by practitioners were assessed. A total of 134 responses to the questionnaire were returned. Most responses (79%) expressed the belief that new bariatric techniques are needed to improve the practice of bariatric and metabolic surgery. The responses describing the effects of new procedures and technology as beneficial were (1) increased interest from patients or referring physicians (94%), (2) expanded indications for intervention (93%), and (3) lower risk intervention (96%). Nearly all respondents (90.2%) identified value in informational guidelines on new technologies and procedures, and most (88.7%) agreed that the ASMBS should coordinate clinical trials or registries to evaluate these therapies. Although most bariatric and metabolic surgeons agree that new endoluminal surgical techniques are beneficial, most also are unable to offer the procedures to their patients without more clinical evidence and clear guidelines from the society. Copyright © 2015 American Society for Metabolic and Bariatric Surgery. All rights reserved.

Accomplishing the genotype-specific serodiagnosis of single and dual Trypanosoma cruzi infections by flow cytometry Chagas-Flow ATE-IgG2a

PubMed Central

Alessio, Glaucia Diniz; de Araújo, Fernanda Fortes; Sales Júnior, Policarpo Ademar; Gomes, Matheus de Souza; do Amaral, Laurence Rodrigues; Pascoal Xavier, Marcelo Antônio; Teixeira-Carvalho, Andréa; de Lana, Marta

2018-01-01

The methods currently available for genotype-specific diagnosis of T. cruzi infection still present relevant limitations, especially to identify mixed infection. In the present investigation, we have evaluated the performance of Chagas-Flow ATE-IgG2a test for early and late differential diagnosis of single and dual genotype-specific T. cruzi infections. Serum samples from Swiss mice at early and late stages of T. cruzi infection were assayed in parallel batches for genotype-specific diagnosis of single (TcI, TcVI or TcII) and dual (TcI+TcVI, TcVI+TcII or TcII+TcI) infections. The intrinsic reactivity to TcI, TcVI and TcII target antigens, including amastigote (AI/AVI/AII), trypomastigote-(TI/TVI/TII) and epimastigote (EI/EVI/EII), at specific reverse of serum dilutions (500 to 64,000), was employed to provide reliable decision-trees for “early” vs “late”, “single vs “dual” and “genotype-specific” serology. The results demonstrated that selective set of attributes “EII 500/EI 2,000/AII 500” were able to provide high-quality accuracy (81%) to segregate early and late stages of T. cruzi infection. The sets “TI 2,000/AI 1,000/EII 1,000” and “TI 8,000/AII 32,000” presented expressive scores to discriminate single from dual T. cruzi infections at early (85%) and late stages (84%), respectively. Moreover, the attributes “TI 4,000/TVI 500/TII 1,000”, “TI 16,000/EI 2,000/EII 2,000/AI 500/TVI 500” showed good performance for genotype-specific diagnosis at early stage of single (72%) and dual (80%) T. cruzi infections, respectively. In addition, the attributes “TI 4,000/AII 1,000/EVI 1,000”, “TI 64,000/AVI 500/AI 2,000/AII 1,000/EII 4,000” showed moderate performance for genotype-specific diagnosis at late stage of single (69%) and dual (76%) T. cruzi infections, respectively. The sets of decision-trees were assembled to construct a sequential algorithm with expressive accuracy (81%) for serological diagnosis of T. cruzi infection. These findings engender new perspectives for the application of Chagas-Flow ATE-IgG2a method for genotype-specific diagnosis in humans, with relevant contributions for epidemiological surveys as well as clinical and post-therapeutic monitoring of Chagas disease. PMID:29462135

Avian comparisons between Kingman and Kenilworth Marshes: Final report 2001-2004

USGS Publications Warehouse

Paul, M.; Krafft, C.; Hammerschlag, D.

2006-01-01

In 2001 avi-fauna was added as a parameter to be monitored as an indicator of the status and relative success of the two reconstructed freshwater tidal wetlands residing in the Anacostia River estuary in Washington, D.C. at that time. They were Kenilworth Marsh which was reconstructed in 1993 and Kingman Marsh seven years later in 2000. Other studies were already underway looking at vegetation, seeds, soils and contaminants. Even though these new wetlands were relatively small, together about 70 acres, it was felt this might be sufficient area to sustain and attract birds to the habitat. Birds have been used elsewhere as wetland indicators and we hoped they could prove useful here especially in terms of numbers and species richness. The study was conducted for almost four years (2001-2004) and was designed to ascertain if the recently reconstructed Kingman Marsh evolved similarly with respect to the avi fauna as Kenilworth which had the seven year head start. Twelve observation points were established, six at each marsh, which were to be used weekly so as to alternate the high and low tidal regimes and the observation start times. Additional notations were recorded for species while walking between observation points. The course of the study became interrupted with the incursion of resident Canada geese particularly upon the Kingman Marsh site. Goose herbivory coupled with lowered sediment elevations reduced vegetation cover at Kingman Marsh to less than one-third its intended scope while Kenilworth was barely affected. The result was actually much less impact on the bird populations than on the vegetation. In fact the additional mudflat area at Kingman may have actually helped attract some birds. Together 177 species were identified at the marshes comprising 14 taxonomic orders and 16 families, 137 species at Kingman and 164 at Kenilworth. However, Kingman actually attracted more birds than Kenilworth, whether or not Canada Geese were included. At both wetlands winter usage was significantly greater than at other seasons; however, there were more species in the spring and summer. Three functional guilds were looked at in particular: wetland users, freshwater marsh users and mudflat/shore users. Mudflat users were greatest during the winter while marsh users were greater in the fall. Additional useful data was collected relative to the Canada Goose impacts. The interruption in marsh evolution at Kingman driven by the goose herbivory precluded the opportunity to use the avifauna as an indicator of marsh restoration success.

[RESEARCH PROGRESS OF THREE-DIMENSIONAL PRINTING TECHNIQUE FOR SPINAL IMPLANTS].

PubMed

Lu, Qi; Yu, Binsheng

2016-09-08

To summarize the current research progress of three-dimensional (3D) printing technique for spinal implants manufacture. The recent original literature concerning technology, materials, process, clinical applications, and development direction of 3D printing technique in spinal implants was reviewed and analyzed. At present, 3D printing technologies used to manufacture spinal implants include selective laser sintering, selective laser melting, and electron beam melting. Titanium and its alloys are mainly used. 3D printing spinal implants manufactured by the above materials and technology have been successfully used in clinical. But the problems regarding safety, related complications, cost-benefit analysis, efficacy compared with traditional spinal implants, and the lack of relevant policies and regulations remain to be solved. 3D printing technique is able to provide individual and customized spinal implants for patients, which is helpful for the clinicians to perform operations much more accurately and safely. With the rapid development of 3D printing technology and new materials, more and more 3D printing spinal implants will be developed and used clinically.

GEO2Enrichr: browser extension and server app to extract gene sets from GEO and analyze them for biological functions.

PubMed

Gundersen, Gregory W; Jones, Matthew R; Rouillard, Andrew D; Kou, Yan; Monteiro, Caroline D; Feldmann, Axel S; Hu, Kevin S; Ma'ayan, Avi

2015-09-15

Identification of differentially expressed genes is an important step in extracting knowledge from gene expression profiling studies. The raw expression data from microarray and other high-throughput technologies is deposited into the Gene Expression Omnibus (GEO) and served as Simple Omnibus Format in Text (SOFT) files. However, to extract and analyze differentially expressed genes from GEO requires significant computational skills. Here we introduce GEO2Enrichr, a browser extension for extracting differentially expressed gene sets from GEO and analyzing those sets with Enrichr, an independent gene set enrichment analysis tool containing over 70 000 annotated gene sets organized into 75 gene-set libraries. GEO2Enrichr adds JavaScript code to GEO web-pages; this code scrapes user selected accession numbers and metadata, and then, with one click, users can submit this information to a web-server application that downloads the SOFT files, parses, cleans and normalizes the data, identifies the differentially expressed genes, and then pipes the resulting gene lists to Enrichr for downstream functional analysis. GEO2Enrichr opens a new avenue for adding functionality to major bioinformatics resources such GEO by integrating tools and resources without the need for a plug-in architecture. Importantly, GEO2Enrichr helps researchers to quickly explore hypotheses with little technical overhead, lowering the barrier of entry for biologists by automating data processing steps needed for knowledge extraction from the major repository GEO. GEO2Enrichr is an open source tool, freely available for installation as browser extensions at the Chrome Web Store and FireFox Add-ons. Documentation and a browser independent web application can be found at http://amp.pharm.mssm.edu/g2e/. avi.maayan@mssm.edu. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Malware distributed collection and pre-classification system using honeypot technology

NASA Astrophysics Data System (ADS)

Grégio, André R. A.; Oliveira, Isabela L.; Santos, Rafael D. C.; Cansian, Adriano M.; de Geus, Paulo L.

2009-04-01

Malware has become a major threat in the last years due to the ease of spread through the Internet. Malware detection has become difficult with the use of compression, polymorphic methods and techniques to detect and disable security software. Those and other obfuscation techniques pose a problem for detection and classification schemes that analyze malware behavior. In this paper we propose a distributed architecture to improve malware collection using different honeypot technologies to increase the variety of malware collected. We also present a daemon tool developed to grab malware distributed through spam and a pre-classification technique that uses antivirus technology to separate malware in generic classes.

10 CFR 420.18 - Expenditure prohibitions and limitations.

Code of Federal Regulations, 2010 CFR

2010-01-01

... demonstration of energy efficiency or renewable energy techniques and technologies not commercially available... available energy efficiency or renewable energy techniques and technologies are permitted, and are not... which are included in the State's approved SEP plan. (e) A State may use funds under this subpart for...

10 CFR 420.18 - Expenditure prohibitions and limitations.

Code of Federal Regulations, 2011 CFR

2011-01-01

... demonstration of energy efficiency or renewable energy techniques and technologies not commercially available... available energy efficiency or renewable energy techniques and technologies are permitted, and are not... which are included in the State's approved SEP plan. (e) A State may use funds under this subpart for...

Digital multicolor printing: state of the art and future challenges

NASA Astrophysics Data System (ADS)

Kipphan, Helmut

1995-04-01

During the last 5 years, digital techniques have become extremely important in the graphic arts industry. All sections in the production flow for producing multicolor printed products - prepress, printing and postpress - are influenced by digitalization, in an evolutionary and revolutionary way. New equipment and network techniques bring all the sections closer together. The focus is put on high-quality multicolor printing, together with high productivity. Conventional offset printing technology is compared with the leading nonimpact printing technologies. Computer to press is contrasted with computer to print techniques. The newest available digital multicolor presses are described - the direct imaging offset printing press from HEIDELBERG with new laser imaging technique as well as the INDIGO and XEIKON presses based on electrophotography. Regarding technical specifications, economic calculations and print quality, it is worked out that each technique has its own market segments. An outlook is given for future computer to press techniques and the potential of nonimpact printing technologies for advanced high-speed multicolor computer to print equipment. Synergy effects from the NIP-technologies to the conventional printing technologies and vice versa are possible for building up innovative new products, for example hybrid printing systems. It is also shown that there is potential for improving the print quality, based on special screening algorithms, and a higher number of grey levels per pixel by using NIP-technologies. As an intermediate step in digitalization of the production flow, but also as an economical solution computer to plate equipment is described. By producing printed products totally in a digital way, digital color proofing as well as color management systems are needed. The newest high-tech equipment using NIP-technologies for producing proofs is explained. All in all it is shown that the state of the art in digital multicolor printing has reached a very high level in technology, productivity and quality, but that there is still space for improvements and innovations. Manufacturers of equipment and producers of printed products can take part in a successful evolution-changes, chances and challenges must be recognized and considered for future orientated activities and investments.

Teaching high-speed photography and photo-instrumentation

NASA Astrophysics Data System (ADS)

Davidhazy, Andrew

2005-03-01

As the tools available to the high speed photographer have become more powerful the underlying technology has increased in complexity and often is beyond the reach of most practitioners in terms of in-the-field troubleshooting or adaptation and this specialization has also driven many systems beyond the reach of high school, community college and undergraduate, non-research funded, universities. In spite of this and with the belief that fundamental techniques, reasoning and approaches have not changed much over the years, several courses in photo-instrumentation at the Imaging and Photographic Technology program at the Rochester Institute of Technology present to a couple dozen undergraduate students a year the principles associated with a various imaging systems and techniques for visualization and data analysis of high speed or "invisible" phenomena. This paper reviews the objectives and philosophy of these courses in the context of a total imaging technology education. It describes and illustrates current topics included in the program. In brief, calibration and time measurement concepts, instantaneous and repetitive time sampling equipment, various visualization technologies, strip and streak cameras and applications using film and improvised digital recorders, basic velocimetry techniques including sensitometric velocimetry and synchro-ballistic photography plus other related techniques are introduced to undergraduate students.

Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

PubMed Central

Salazar, Jaime; Müller, Rainer H.; Möschwitzer, Jan P.

2014-01-01

Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals. PMID:26556191

Modern adjuncts and technologies in microsurgery: an historical and evidence-based review.

PubMed

Pratt, George F; Rozen, Warren M; Chubb, Daniel; Whitaker, Iain S; Grinsell, Damien; Ashton, Mark W; Acosta, Rafael

2010-11-01

While modern reconstructive surgery was revolutionized with the introduction of microsurgical techniques, microsurgery itself has seen the introduction of a range of technological aids and modern techniques aiming to improve dissection times, anastomotic times, and overall outcomes. These include improved preoperative planning, anastomotic aides, and earlier detection of complications with higher salvage rates. Despite the potential for substantial impact, many of these techniques have been evaluated in a limited fashion, and the evidence for each has not been universally explored. The purpose of this review was to establish and quantify the evidence for each technique. A search of relevant medical databases was performed to identify literature providing evidence for each technology. Levels of evidence were thus accumulated and applied to each technique. There is a relative paucity of evidence for many of the more recent technologies described in the field of microsurgery, with no randomized controlled trials, and most studies in the field comprising case series only. Current evidence-based suggestions include the use of computed tomographic angiography (CTA) for the preoperative planning of perforator flaps, the intraoperative use of a mechanical anastomotic coupling aide (particularly the Unilink® coupler), and postoperative flap monitoring with strict protocols using clinical bedside monitoring and/or the implantable Doppler probe. Despite the breadth of technologies introduced into the field of microsurgery, there is substantial variation in the degree of evidence presented for each, suggesting the role for much future research, particularly from emerging technologies such as robotics and modern simulators. Copyright © 2010 Wiley-Liss, Inc.

A Fifteen-Year Forecast of Information-Processing Technology. Final Report.

ERIC Educational Resources Information Center

Bernstein, George B.

This study developed a variation of the DELPHI approach, a polling technique for systematically soliciting opinions from experts, to produce a technological forecast of developments in the information-processing industry. SEER (System for Event Evaluation and Review) combines the more desirable elements of existing techniques: (1) intuitive…

White Paper AGA: Advanced Imaging in Barrett's Esophagus.

PubMed

Sharma, Prateek; Brill, Joel; Canto, Marcia; DeMarco, Daniel; Fennerty, Brian; Gupta, Neil; Laine, Loren; Lieberman, David; Lightdale, Charles; Montgomery, Elizabeth; Odze, Robert; Tokar, Jeffrey; Kochman, Michael

2015-12-01

Enhanced imaging technologies such as narrow band imaging, flexible spectral imaging color enhancement, i-Scan, confocal laser endomicroscopy, and optical coherence tomography are readily available for use by endoscopists in routine clinical practice. In November 2014, the American Gastroenterological Association's Center for GI Innovation and Technology conducted a 2-day workshop to discuss endoscopic image enhancement technologies, focusing on their role in 2 specific clinical conditions (colon polyps and Barrett's esophagus) and on issues relating to training and implementation of these technologies (white papers). Although the majority of the studies that use enhanced imaging technologies have been positive, these techniques ideally need to be validated in larger cohorts and in community centers. As it stands today, detailed endoscopic examination with high-definition white-light endoscopy and random 4-quadrant biopsy remains the standard of care. However, the workshop panelists agreed that in the hands of endoscopists who have met the preservation and incorporation of valuable endoscopic innovation thresholds (diagnostic accuracy) with enhanced imaging techniques (specific technologies), use of the technique in Barrett's esophagus patients is appropriate. Copyright © 2015 AGA Institute. Published by Elsevier Inc. All rights reserved.

[New advances in animal transgenic technology].

PubMed

Sun, Zhen-Hong; Miao, Xiang-Yang; Zhu, Rui-Liang

2010-06-01

Animal transgenic technology is one of the fastest growing biotechnology in the 21st century. It is used to integrate foreign genes into the animal genome by genetic engineering technology so that foreign genes can be expressed and inherited to the offspring. The transgenic efficiency and precise control of gene expression are the key limiting factors on preparation of transgenic animals. A variety of transgenic techniques are available, each of which has its own advantages and disadvantages and still needs further study because of unresolved technical and safety issues. With the in-depth research, the transgenic technology will have broad application prospects in the fields of exploration of gene function, animal genetic improvement, bioreactor, animal disease models, organ transplantation and so on. This article reviews the recently developed animal gene transfer techniques, including germline stem cell mediated method to improve the efficiency, gene targeting to improve the accuracy, RNA interference (RNAi)-mediated gene silencing technology, and the induced pluripotent stem cells (iPS) transgenic technology. The new transgenic techniques can provide a better platform for the study of trans-genic animals and promote the development of medical sciences, livestock production, and other fields.

The clinical benefit and safety of current and future assisted reproductive technology.

PubMed

Brown, Rachel; Harper, Joyce

2012-08-01

Since the first birth by IVF was achieved in 1978, the techniques involved in assisted reproductive technology have grown at an enormous rate. However, new technology has rarely been robustly validated before clinical use and developing scientific understanding of the available techniques has done little to alter their use. Furthermore, there are inconsistencies in the available clinical studies and endpoints. The benefits of some technologies already established for routine use are currently dubious and there are clear ethical concerns with providing them to patients when their scientific basis is not clear. As the uptake of assisted reproductive technology increases and newer technologies continue to push the boundaries of science, it is important to consider the clinical benefits and safety of all assisted reproductive technologies. This review will discuss aspects of some of the more recent techniques, including sperm DNA-damage tests, intracytoplasmic morphologically selected sperm injection, amino acid and metabolomics profiling, preimplantation genetic screening and time-lapse imaging, and those that may have substantial impacts on the field of reproductive medicine in the future including artificial gametes, ovarian transplantation and gene therapy. Copyright © 2012 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Technology and Technique: An Educational Perspective

ERIC Educational Resources Information Center

Isman, Aytekin

2012-01-01

Today, technology is developing very fast around the world. This technological development (hardware and software) affects our life. There is a relationship among technology, society, culture, organization, machines, technical operation, and technical phenomenon. Educators should know this relationship because technology begins to affect teaching…

Applying the miniaturization technologies for biosensor design.

PubMed

Derkus, Burak

2016-05-15

Microengineering technologies give us some opportunities in developing high-tech sensing systems that operate with low volumes of samples, integrates one or more laboratory functions on a single substrate, and enables automation. These millimetric sized devices can be produced for only a few dollars, which makes them promising candidates for mass-production. Besides electron beam lithography, stencil lithography, nano-imprint lithography or dip pen lithography, basic photolithography is the technique which is extensively used for the design of microengineered sensing systems. This technique has some advantages such as easy-to-manufacture, do not require expensive instrumentation, and allow creation of lower micron-sized patterns. In this review, it has been focused on three different type of microengineered sensing devices which are developed using micro/nano-patterning techniques, microfluidic technology, and microelectromechanics system based technology. Copyright © 2016 Elsevier B.V. All rights reserved.

[Advances of studies on new technology and method for identifying traditional Chinese medicinal materials].

PubMed

Chen, Shilin; Guo, Baolin; Zhang, Guijun; Yan, Zhuyun; Luo, Guangming; Sun, Suqin; Wu, Hezhen; Huang, Linfang; Pang, Xiaohui; Chen, Jianbo

2012-04-01

In this review, the authors summarized the new technologies and methods for identifying traditional Chinese medicinal materials, including molecular identification, chemical identification, morphological identification, microscopic identification and identification based on biological effects. The authors introduced the principle, characteristics, application and prospect on each new technology or method and compared their advantages and disadvantages. In general, new methods make the result more objective and accurate. DNA barcoding technique and spectroscopy identification have their owner obvious strongpoint in universality and digitalization. In the near future, the two techniques are promising to be the main trend for identifying traditional Chinese medicinal materials. The identification techniques based on microscopy, liquid chromatography, PCR, biological effects and DNA chip will be indispensable supplements. However, the bionic identification technology is just placed in the developing stage at present.

Technique for Determination of Rational Boundaries in Combining Construction and Installation Processes Based on Quantitative Estimation of Technological Connections

NASA Astrophysics Data System (ADS)

Gusev, E. V.; Mukhametzyanov, Z. R.; Razyapov, R. V.

2017-11-01

The problems of the existing methods for the determination of combining and technologically interlinked construction processes and activities are considered under the modern construction conditions of various facilities. The necessity to identify common parameters that characterize the interaction nature of all the technology-related construction and installation processes and activities is shown. The research of the technologies of construction and installation processes for buildings and structures with the goal of determining a common parameter for evaluating the relationship between technologically interconnected processes and construction works are conducted. The result of this research was to identify the quantitative evaluation of interaction construction and installation processes and activities in a minimum technologically necessary volume of the previous process allowing one to plan and organize the execution of a subsequent technologically interconnected process. The quantitative evaluation is used as the basis for the calculation of the optimum range of the combination of processes and activities. The calculation method is based on the use of the graph theory. The authors applied a generic characterization parameter to reveal the technological links between construction and installation processes, and the proposed technique has adaptive properties which are key for wide use in organizational decisions forming. The article provides a written practical significance of the developed technique.

Reduction of Helicopter Blade-Vortex Interaction Noise by Active Rotor Control Technology

NASA Technical Reports Server (NTRS)

Yu, Yung H.; Gmelin, Bernd; Splettstoesser, Wolf; Brooks, Thomas F.; Philippe, Jean J.; Prieur, Jean

1997-01-01

Helicopter blade-vortex interaction noise is one of the most severe noise sources and is very important both in community annoyance and military detection. Research over the decades has substantially improved basic physical understanding of the mechanisms generating rotor blade-vortex interaction noise and also of controlling techniques, particularly using active rotor control technology. This paper reviews active rotor control techniques currently available for rotor blade vortex interaction noise reduction, including higher harmonic pitch control, individual blade control, and on-blade control technologies. Basic physical mechanisms of each active control technique are reviewed in terms of noise reduction mechanism and controlling aerodynamic or structural parameters of a blade. Active rotor control techniques using smart structures/materials are discussed, including distributed smart actuators to induce local torsional or flapping deformations, Published by Elsevier Science Ltd.

Arts and technology - Mosaic new techniques and procedures

NASA Astrophysics Data System (ADS)

Papiu, G. A.; Suciu, N.

2017-05-01

The relationship between art and technique has been along the time one that is inseparable and systematic, artists appealing to various technologies, tools and practices that help them stimulate their imagination. Today there is a new category of artists, coming from a technical or scientific field, that are being 'trapped’ in this ‘game of art”. The mosaic, even if it is an old technique, responded to the social requirements and it evolved over time, being constantly related to aesthetic and artistic thinking, discoveries of science, assimilating permanent new techniques and technologies, diversifying its artistic forms of expression and methods of transposition. Not being bound any more to a religious institution, which was its birth place, today, she migrated to all public spaces. Works of art in public space have become today an active factor in reshaping the urban aesthetic landscape.

Way to nanogrinding technology

NASA Astrophysics Data System (ADS)

Miyashita, Masakazu

1990-11-01

Precision finishing process of hard and brittle material components such as single crystal silicon wafer and magnetic head consists of lapping and polishing which depend too much on skilled labor. This process is based on the traditional optical production technology and entirely different from the automated mass production technique in automobile production. Instead of traditional lapping and polishing, the nanogrinding is proposed as a new stock removal machining to generate optical surface on brittle materials. By this new technology, the damage free surface which is the same one produced by lapping and polishing can be obtained on brittle materials, and the free carvature can also be generated on brittle materials. This technology is based on the motion copying principle which is the same as in case of metal parts machining. The new nanogrinding technology is anticipated to be adapted as the machining technique suitable for automated mass production, because the stable machining on the level of optical production technique is expected to be obtained by the traditional lapping and polishing.

Photons and Ground-Based

NASA Technical Reports Server (NTRS)

Spann, James F.; Moore, Thomas E.

2017-01-01

A Conference on Measurement Techniques for Solar and Space Physics was held on 20-24 April 2015 in Boulder, Colorado, at the National Center for Atmospheric Research Center Green Campus. The present volume collects together the conference papers for photons and ground-based categories. This gathering of over 200 scientists and instrumentalists was born out of the desire to collect in one place the latest experiment and instrument technologies required for advancement of scientific knowledge in the disciplines of solar and space physics. The two goals for this conference and the subsequent publication of its content are (a) to describe measurement techniques and technology development needed to advance high priority science in the fields of solar and space physics; and (b) to provide a survey or reference of techniques for in situ measurement and remote sensing of space plasmas. Towards this end, our goal has always been inspired by the two 1998 Geophysical Monographs (Nos. 102 and 103) entitled, "Measurement Techniques in Space Plasmas" (particles and fields) [Pfaff et al., 1998a, 1998b], which have served as a reference and resource for advanced students, engineers, and scientists who wish to learn the fundamentals of measurement techniques and technology in this field. Those monographs were the product of an American Geophysical Union Chapman Conference that took place in Santa Fe, NM, in 1995: "Measurement Techniques in Space Plasmas-What Works, What Doesn't." Two decades later, we believe that it is appropriate to revisit this subject, in light of recent advances in technology, research platforms, and analysis techniques. Moreover, we now include direct measurements of neutral gases in the upper atmosphere, optical imaging techniques, and remote observations in space and on the ground. Accordingly, the workshop was organized among four areas of measurement techniques: particles, fields, photons, and ground-based. This two-set volume is largely composed of the content of that workshop. Special attention is given to those techniques and technologies that demonstrate promise of significant advancement in measurements that will enable the highest priority science as described in the 2012 National Research Council Decadal Survey [Baker and Zurbuchen et al., 2013]. Additionally, a broad tutorial survey of the current technologies is provided to serve as reference material and as a basis from which advanced and innovative ideas can be discussed and pursued. Included are instrumentation and techniques to observe the solar environment from its interior to its outer atmosphere, the heliosphere out to the interstellar regions, in geospace, and other planetary magnetospheres and atmospheres. To make significant progress in priority science as expressed in the National Research Council solar and space physics decadal survey and recent NASA Heliophysics roadmaps, identification of enabling new measurement techniques and technologies to be developed is required. Also, it is valuable to the community and future scientists and engineers to have a complete survey of the techniques and technologies used by the practitioners of solar and space physics. As with the 1995 conference and subsequent 1998 publication, it is incumbent on the community to identify those measurements that are particularly challenging and still require new techniques to be identified and tested to enable the necessary accuracy and resolution of certain parameters to be achieved. The following is a partial list of the measurement technique categories that are featured in these special publications: Particles; Thermal plasma to MeV energetic particles, neutral gas properties including winds, density, temperature, and composition, and enhanced neutral atom imaging; Fields; DC electric and magnetic fields, plasma waves, and electron drift instruments from which the plasma velocity information provides a measure of the DC electric field; Photons; Instruments sensitive from the near-infrared to X-rays; Contributions of techniques and technology for optical design, optical components, sensors, material selection for cameras, telescopes, and spectrographs; Ground based; Remote sensing methods for solar and geospace activity and space weather. The focus includes solar observatories, all-sky cameras, lidars, and ionosphere thermosphere mesosphere observatory systems such as radars, ionosondes, GPS receivers, magnetometers, conjugate observations, and airborne campaigns. The present volume collects together the papers for photons and ground-based categories. The companion volume collects together the papers for particles and fields categories. It is recognized that there are measurement techniques that overlap among the four categories. For example, use of microchannel plate detectors is used in photon and particle measurement techniques or the observation of visible photons and magnetic fields in space and on the ground share common technologies. Therefore, the reader should consider the entire collection of papers as they seek to understand particular applications. We hope that these volumes will be as valuable as a reference for our community as the earlier 1998 volumes have been.

Introduction: Photons and Ground-Based

NASA Technical Reports Server (NTRS)

Spann, James; Moore, Thomas

2017-01-01

A Conference on Measurement Techniques for Solar and Space Physics was held on 20-24 April 2015 in Boulder, Colorado, at the National Center for Atmospheric Research Center Green Campus. The present volume collects together the conference papers for photons and ground-based categories. This gathering of over 200 scientists and instrumentalists was born out of the desire to collect in one place the latest experiment and instrument technologies required for advancement of scientific knowledge in the disciplines of solar and space physics. The two goals for this conference and the subsequent publication of its content are (a) to describe measurement techniques and technology development needed to advance high priority science in the fields of solar and space physics; and (b) to provide a survey or reference of techniques for in situ measurement and remote sensing of space plasmas. Towards this end, our goal has always been inspired by the two 1998 Geophysical Monographs (Nos. 102 and 103) entitled, "Measurement Techniques in Space Plasmas" (particles and fields) [Pfaff et al., 1998a, 1998b], which have served as a reference and resource for advanced students, engineers, and scientists who wish to learn the fundamentals of measurement techniques and technology in this field. Those monographs were the product of an American Geophysical Union Chapman Conference that took place in Santa Fe, NM, in 1995: "Measurement Techniques in Space Plasmas-What Works, What Doesn't." Two decades later, we believe that it is appropriate to revisit this subject, in light of recent advances in technology, research platforms, and analysis techniques. Moreover, we now include direct measurements of neutral gases in the upper atmosphere, optical imaging techniques, and remote observations in space and on the ground. Accordingly, the workshop was organized among four areas of measurement techniques: particles, fields, photons, and ground-based. This two-set volume is largely composed of the content of that workshop. Special attention is given to those techniques and technologies that demonstrate promise of significant advancement in measurements that will enable the highest priority science as described in the 2012 National Research Council Decadal Survey [Baker and Zurbuchen et al., 2013]. Additionally, a broad tutorial survey of the current technologies is provided to serve as reference material and as a basis from which advanced and innovative ideas can be discussed and pursued. Included are instrumentation and techniques to observe the solar environment from its interior to its outer atmosphere, the heliosphere out to the interstellar regions, in geospace, and other planetary magnetospheres and atmospheres. To make significant progress in priority science as expressed in the National Research Council solar and space physics decadal survey and recent NASA Heliophysics roadmaps, identification of enabling new measurement techniques and technologies to be developed is required. Also, it is valuable to the community and future scientists and engineers to have a complete survey of the techniques and technologies used by the practitioners of solar and space physics. As with the 1995 conference and subsequent 1998 publication, it is incumbent on the community to identify those measurements that are particularly challenging and still require new techniques to be identified and tested to enable the necessary accuracy and resolution of certain parameters to be achieved. The following is a partial list of the measurement technique categories that are featured in these special publications: Particles; Thermal plasma to MeV energetic particles, neutral gas properties including winds, density, temperature, and composition, and enhanced neutral atom imaging; Fields; DC electric and magnetic fields, plasma waves, and electron drift instruments from which the plasma velocity information provides a measure of the DC electric field; Photons; Instruments sensitive from the near-infrared to X-rays; Contributions of techniques and technology for optical design, optical components, sensors, material selection for cameras, telescopes, and spectrographs; Ground based; Remote sensing methods for solar and geospace activity and space weather. The focus includes solar observatories, all-sky cameras, lidars, and ionosphere thermosphere mesosphere observatory systems such as radars, ionosondes, GPS receivers, magnetometers, conjugate observations, and airborne campaigns. The present volume collects together the papers for photons and ground-based categories. The companion volume collects together the papers for particles and fields categories. It is recognized that there are measurement techniques that overlap among the four categories. For example, use of microchannel plate detectors is used in photon and particle measurement techniques or the observation of visible photons and magnetic fields in space and on the ground share common technologies. Therefore, the reader should consider the entire collection of papers as they seek to understand particular applications. We hope that these volumes will be as valuable as a reference for our community as the earlier 1998 volumes have been.

Skylab medical technology utilization

NASA Technical Reports Server (NTRS)

Stonesifer, J. C.

1974-01-01

To perform the extensive medical experimentation on man in a long-term, zero-g environment, new medical measuring and monitoring equipment had to be developed, new techniques in training and operations were required, and new methods of collecting and analyzing the great amounts of medical data were developed. Examples of technology transfers to the public sector resulted from the development of new equipment, methods, techniques, and data. This paper describes several of the examples that stemmed directly from Skylab technology.

The interaction between biology and the management of aquatic macrophytes

USGS Publications Warehouse

Nichols, S.A.

1991-01-01

'Management' refers to controlling nuisance aquatic species and to restoring or restructing aquatic plant communities. Producing stable, diverse, aquatic plant communities containing a high percentage of desirable species is a primary management goal. There are a variety of techniques including harvesting, herbicides, water-level fluctuation, sediment alteration, nutrient limitation, light alteration, and biological controls which can be used for managing macrophytes. These techniques are briefly reviewed along with discussions of biological considerations important to the efficacy of the technique and the environmental impacts of the technique. There is a growing interest in restoring and restructing aquatic plant communities. Techniques for community restoration are discussed as are emerging management technologies using growth regulators and bioengineering. New management technologies will probably be limited by costs and environmental impacts. In the near future, better macrophyte management will come through better planning and more effective use of present technology. The challenge is to make current planning and management techniques more effective through increased biological inputs. The potential for biological input ranges from subcellular biology to species biology, to community and ecosystem biology. Some information needs are identified. ?? 1991.

Traitement chirurgical initial des brûlures de la main de l’enfant. Revue

PubMed Central

Goffinet, L.; Breton, A.; Gavillot, C.; Barbary, S.; Journeau, P.; Lascombes, P.; Dautel, G.

2015-01-01

Summary Trente cinq revues concernant la prise en charge chirurgicale de la main brûlée de l’enfant sont indexées dans Pub- Med. Elles portent sur l’indication de la cicatrisation dirigée versus chirurgie, les techniques et délais d’instauration des traitements par excision-greffe, le calendrier et la nature du traitement de réadaptation et la surveillance. L’enfant présente un risque accru de brides cicatricielles, nécessitant un suivi médico-chirurgical attentif et prolongé. L’objet de cet article est de rapporter les spécificités chirurgicales de la prise en charge de ces brûlures. Cette revue de la littérature, réalisée au moyen de la base PubMed (publication entre 2005 et 2011) à partir des mots-clés « hand AND/OR child AND/OR burn » retrouve 67 publications utiles au sein de 171 références. Les données rapportées ont été comparées aux ouvrages de références français et américains. Des données contradictoires sont rapportées concernant la délai de l’excision et de la greffe, avec seulement deux études comparatives comportant de nombreux biais. L’état de la science n’apporte pas d’éléments de preuve suffisant en raison d’un manque de puissance statistique des études, mais de nombreux avis d’expert explorant chaque type d’indication permet d’établir une stratégie claire, guidant les indications thérapeutiques. Il apparaît donc indispensable de réaliser des études prospectives incluant ces patients depuis le suivi initial jusqu’au suivi à long terme, pour augmenter le niveau de preuve de cette stratégie. PMID:27279807

Comparative study of anti-drift nozzles' wear.

PubMed

Bolly, G; Huyghebaert, B; Mostade, O; Oger, R

2002-01-01

When spraying, the drift is a restricting factor which reduces the efficiency of pesticides treatments and increases their impact on the environment. The use of anti-drift nozzles is the most common technique to reduce the drift effect. The basic principle of all anti-drift nozzles is to produce bigger droplets (Imag DLO, 1999) being less sensitive to the wind. The increase of the droplets' size is possible whether by reducing the spraying pressure (anti-drift fan nozzle) or by injecting air in the nozzle (air injection nozzles). This study aims at comparing the performances of the main anti-drift nozzles available on the Belgian market (Teejet DG and AI, Albuz ADI and AVI, Hardi ISO LD et AI). The study made it possible to compare thirteen different nozzles' sets according to their trademark, type and material. The study is based on the analysis of macroscopic parameters (flowrate, transversal distribution and individual distribution) as well as on the analysis of microscopic parameters (spraying deposit on artificial target). The evolution of these parameters is analysed according to the nozzle's wear. The wear is carried out artificially according to the "ISO 5682-1" standard (ISO 5682-1, 1996). The results confirmed the major influence of the manufacturing material on the nozzles' wear, ceramic being the most resistant material. Macroscopic as well as microscopic parameters variated according to the utilization time without any direct correlation. Indeed, most parameters variate in an uncertain way. It was however possible to establish a correlation between the wear time and the recovering rate and flowrate parameters. The utilization length is different depending on the type of nozzle, air injection nozzles being more resistant. At last, the analysis of microscopic parameters (spraying deposit) (Degré A., 1999), shows that the number of impacts is stable depending on the wear, while the size of impacts and the recovering rate increase.

Science and Technology of Nanostructured Magnetic Materials

DTIC Science & Technology

1990-07-06

galvano-magnetic and magneto-optic effects that can lead to future storage technologies. Ultrafine particles also show interesting and unique properties...areas including thin films, multilayers, disordered systems, ultrafine particles , intermetallic compounds, permanent magnets and magnetic imaging... ultrafine particles , intermetallic compounds, permanent magnets and magnetic imaging techniques. The development of new techniques for materials preparation

Distributed and Problem-based Learning Techniques for the Family Communication Course.

ERIC Educational Resources Information Center

LeBlanc, H. Paul, III

Current technological advances have made possible teaching techniques which were previously impossible. Distance and distributed learning technologies have made it possible to instruct outside of the classroom setting. An advantage to this advance includes that ability to reach students who are unable to relocate to the university. However, there…

When Technique Is the Foundation of Health Care

ERIC Educational Resources Information Center

Downing, Raymond

2012-01-01

One of the clearest examples of a technological system, in the sense that Ellul discussed it, is contemporary biomedical health care. The foundation of technological systems is technique: efficient methods for achieving isolated goals. However, the goal of health care should be to achieve health in the full sense of wholeness. Traditional healing…

Integrating Traditional Learning and Games on Large Displays: An Experimental Study

ERIC Educational Resources Information Center

Ardito, Carmelo; Lanzilotti, Rosa; Costabile, Maria F.; Desolda, Giuseppe

2013-01-01

Current information and communication technology (ICT) has the potential to bring further changes to education. New learning techniques must be identified to take advantage of recent technological tools, such as smartphones, multimodal interfaces, multi-touch displays, etc. Game-based techniques that capitalize on ICT have proven to be very…

Technologies of Student Testing for Learning Quality Evaluation in the System of Higher Education

ERIC Educational Resources Information Center

Bayukova, Nadezhda Olegovna; Kareva, Ludmila Alexandrovna; Rudometova, Liliya Tarasovna; Shlangman, Marina Konstantinovna; Yarantseva, Natalia Vladislavovna

2015-01-01

The paper deals with technology of students' achievement in the area of educational activities, methods, techniques, forms and conditions of monitoring knowledge quality in accordance with the requirements of Russian higher education system modernization. The authors propose methodic techniques of students' training for testing based on innovative…

The Impact of New Technology on the Accounting Curriculum.

ERIC Educational Resources Information Center

Shaoul, Jean

This paper analyzes ways in which the new, relatively cheap, user friendly technology and associated software is changing the way that accounting is being taught. Techniques that have been available, in principle, for years, are now widely available. The newer techniques stress decision making for planning, and, to a lesser extent, control, in…

Just-in-Time Teaching Techniques through Web Technologies for Vocational Students' Reading and Writing Abilities

ERIC Educational Resources Information Center

Chantoem, Rewadee; Rattanavich, Saowalak

2016-01-01

This research compares the English language achievements of vocational students, their reading and writing abilities, and their attitudes towards learning English taught with just-in-time teaching techniques through web technologies and conventional methods. The experimental and control groups were formed, a randomized true control group…

[Technical advances in haemodialysis].

PubMed

Mercadal, Lucile; Petitclerc, Thierry

2009-04-01

Survival improvement of our haemodialysis patients is partly due to technologic improvement of the dialysis therapy. High permeability membranes and bicarbonate dialysate were the most relevant of past decades. What are the present technologic innovations that will provide clinical benefit? Acetate-free biofiltration, biofeedback systems, better haemodiafiltration techniques and techniques with adsorption could be part of them.

Improved technique that allows the performance of large-scale SNP genotyping on DNA immobilized by FTA technology.

PubMed

He, Hongbin; Argiro, Laurent; Dessein, Helia; Chevillard, Christophe

2007-01-01

FTA technology is a novel method designed to simplify the collection, shipment, archiving and purification of nucleic acids from a wide variety of biological sources. The number of punches that can normally be obtained from a single specimen card are often however, insufficient for the testing of the large numbers of loci required to identify genetic factors that control human susceptibility or resistance to multifactorial diseases. In this study, we propose an improved technique to perform large-scale SNP genotyping. We applied a whole genome amplification method to amplify DNA from buccal cell samples stabilized using FTA technology. The results show that using the improved technique it is possible to perform up to 15,000 genotypes from one buccal cell sample. Furthermore, the procedure is simple. We consider this improved technique to be a promising methods for performing large-scale SNP genotyping because the FTA technology simplifies the collection, shipment, archiving and purification of DNA, while whole genome amplification of FTA card bound DNA produces sufficient material for the determination of thousands of SNP genotypes.

Parametric Techniques for Multichannel Signal Processing.

DTIC Science & Technology

1985-10-01

AD-A165 649 PARAMETRIC TECHNIQUES FOR MULTICHANNEL SIGNAL PROCESSING(U) SYSTEM CONTROL TECHNOLOGY INC PALO RLTO CA B FRIEDLANDER OCT 85 5498-87 RRO...CONTRACT NO. DAAG29-83-C-0027 SYSTEMS CONTROL TECHNOLOGY, INC. DT1I? q4 1801 PAGE MILL ROAD ELI PALO ALTO, CALIFORNIA 94304EL C MAR 193 £4 APPROVED FOR...PROJECT, TASK Systems Control Technology, Inc. AREA & WORK UNIT NUMBERS 1801 Page Mill Road Palo Alto, CA 94304 II :ON?’ROLLING OFFICE NAME AND

Innovative experimental particle physics through technological advances: Past, present and future

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheung, Harry W.K.; /Fermilab

This mini-course gives an introduction to the techniques used in experimental particle physics with an emphasis on the impact of technological advances. The basic detector types and particle accelerator facilities will be briefly covered with examples of their use and with comparisons. The mini-course ends with what can be expected in the near future from current technology advances. The mini-course is intended for graduate students and post-docs and as an introduction to experimental techniques for theorists.

Real-time interactive speech technology at Threshold Technology, Incorporated

NASA Technical Reports Server (NTRS)

Herscher, Marvin B.

1977-01-01

Basic real-time isolated-word recognition techniques are reviewed. Industrial applications of voice technology are described in chronological order of their development. Future research efforts are also discussed.

Technologies. [space power sources

NASA Technical Reports Server (NTRS)

Brandhorst, Henry W., Jr.

1992-01-01

Energy technologies to meet the power requirements of future space missions are reviewed. Photovoltaic, solar dynamic, and solar thermal technologies are discussed along with techniques for energy storage and power management and distribution.

Technology and Technique Standards for Camera-Acquired Digital Dermatologic Images: A Systematic Review.

PubMed

Quigley, Elizabeth A; Tokay, Barbara A; Jewell, Sarah T; Marchetti, Michael A; Halpern, Allan C

2015-08-01

Photographs are invaluable dermatologic diagnostic, management, research, teaching, and documentation tools. Digital Imaging and Communications in Medicine (DICOM) standards exist for many types of digital medical images, but there are no DICOM standards for camera-acquired dermatologic images to date. To identify and describe existing or proposed technology and technique standards for camera-acquired dermatologic images in the scientific literature. Systematic searches of the PubMed, EMBASE, and Cochrane databases were performed in January 2013 using photography and digital imaging, standardization, and medical specialty and medical illustration search terms and augmented by a gray literature search of 14 websites using Google. Two reviewers independently screened titles of 7371 unique publications, followed by 3 sequential full-text reviews, leading to the selection of 49 publications with the most recent (1985-2013) or detailed description of technology or technique standards related to the acquisition or use of images of skin disease (or related conditions). No universally accepted existing technology or technique standards for camera-based digital images in dermatology were identified. Recommendations are summarized for technology imaging standards, including spatial resolution, color resolution, reproduction (magnification) ratios, postacquisition image processing, color calibration, compression, output, archiving and storage, and security during storage and transmission. Recommendations are also summarized for technique imaging standards, including environmental conditions (lighting, background, and camera position), patient pose and standard view sets, and patient consent, privacy, and confidentiality. Proposed standards for specific-use cases in total body photography, teledermatology, and dermoscopy are described. The literature is replete with descriptions of obtaining photographs of skin disease, but universal imaging standards have not been developed, validated, and adopted to date. Dermatologic imaging is evolving without defined standards for camera-acquired images, leading to variable image quality and limited exchangeability. The development and adoption of universal technology and technique standards may first emerge in scenarios when image use is most associated with a defined clinical benefit.

An overview of technologies for immobilization of enzymes and surface analysis techniques for immobilized enzymes

PubMed Central

Mohamad, Nur Royhaila; Marzuki, Nur Haziqah Che; Buang, Nor Aziah; Huyop, Fahrul; Wahab, Roswanira Abdul

2015-01-01

The current demands of sustainable green methodologies have increased the use of enzymatic technology in industrial processes. Employment of enzyme as biocatalysts offers the benefits of mild reaction conditions, biodegradability and catalytic efficiency. The harsh conditions of industrial processes, however, increase propensity of enzyme destabilization, shortening their industrial lifespan. Consequently, the technology of enzyme immobilization provides an effective means to circumvent these concerns by enhancing enzyme catalytic properties and also simplify downstream processing and improve operational stability. There are several techniques used to immobilize the enzymes onto supports which range from reversible physical adsorption and ionic linkages, to the irreversible stable covalent bonds. Such techniques produce immobilized enzymes of varying stability due to changes in the surface microenvironment and degree of multipoint attachment. Hence, it is mandatory to obtain information about the structure of the enzyme protein following interaction with the support surface as well as interactions of the enzymes with other proteins. Characterization technologies at the nanoscale level to study enzymes immobilized on surfaces are crucial to obtain valuable qualitative and quantitative information, including morphological visualization of the immobilized enzymes. These technologies are pertinent to assess efficacy of an immobilization technique and development of future enzyme immobilization strategies. PMID:26019635

The Effect of Learning Based on Technology Model and Assessment Technique toward Thermodynamic Learning Achievement

NASA Astrophysics Data System (ADS)

Makahinda, T.

2018-02-01

The purpose of this research is to find out the effect of learning model based on technology and assessment technique toward thermodynamic achievement by controlling students intelligence. This research is an experimental research. The sample is taken through cluster random sampling with the total respondent of 80 students. The result of the research shows that the result of learning of thermodynamics of students who taught the learning model of environmental utilization is higher than the learning result of student thermodynamics taught by simulation animation, after controlling student intelligence. There is influence of student interaction, and the subject between models of technology-based learning with assessment technique to student learning result of Thermodynamics, after controlling student intelligence. Based on the finding in the lecture then should be used a thermodynamic model of the learning environment with the use of project assessment technique.

Any Way You Slice It—A Comparison of Confocal Microscopy Techniques

PubMed Central

Jonkman, James

2015-01-01

The confocal fluorescence microscope has become a popular tool for life sciences researchers, primarily because of its ability to remove blur from outside of the focal plane of the image. Several different kinds of confocal microscopes have been developed, each with advantages and disadvantages. This article will cover the grid confocal, classic confocal laser-scanning microscope (CLSM), the resonant scanning-CLSM, and the spinning-disk confocal microscope. The way each microscope technique works, the best applications the technique is suited for, the limitations of the technique, and new developments for each technology will be presented. Researchers who have access to a range of different confocal microscopes (e.g., through a local core facility) should find this paper helpful for choosing the best confocal technology for specific imaging applications. Others with funding to purchase an instrument should find the article helpful in deciding which technology is ideal for their area of research. PMID:25802490

Economic Perspectives of Technological Progress: New Dimensions for Forecasting Technology

ERIC Educational Resources Information Center

Twiss, Brian

1976-01-01

Discusses the causal relationship between the allocation of financial resources and technological growth. Argues that economic constraints are becoming an important determinant of technological progress that must be incorporated into technology forecasting techniques. (Available from IPC (America) Inc., 205 East 42 Street, New York, NY 10017;…

Arthropod Surveillance Programs: Basic Components, Strategies, and Analysis.

PubMed

Cohnstaedt, Lee W; Rochon, Kateryn; Duehl, Adrian J; Anderson, John F; Barrera, Roberto; Su, Nan-Yao; Gerry, Alec C; Obenauer, Peter J; Campbell, James F; Lysyk, Tim J; Allan, Sandra A

2012-03-01

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium "Advancements in arthropod monitoring technology, techniques, and analysis" presented at the 58th annual meeting of the Entomological Society of America in San Diego, CA. Interdisciplinary examples of arthropod monitoring for urban, medical, and veterinary applications are reviewed. Arthropod surveillance consists of the three components: 1) sampling method, 2) trap technology, and 3) analysis technique. A sampling method consists of selecting the best device or collection technique for a specific location and sampling at the proper spatial distribution, optimal duration, and frequency to achieve the surveillance objective. Optimized sampling methods are discussed for several mosquito species (Diptera: Culicidae) and ticks (Acari: Ixodidae). The advantages and limitations of novel terrestrial and aerial insect traps, artificial pheromones and kairomones are presented for the capture of red flour beetle (Coleoptera: Tenebrionidae), small hive beetle (Coleoptera: Nitidulidae), bed bugs (Hemiptera: Cimicidae), and Culicoides (Diptera: Ceratopogonidae) respectively. After sampling, extrapolating real world population numbers from trap capture data are possible with the appropriate analysis techniques. Examples of this extrapolation and action thresholds are given for termites (Isoptera: Rhinotermitidae) and red flour beetles.

Arthropod Surveillance Programs: Basic Components, Strategies, and Analysis

PubMed Central

Rochon, Kateryn; Duehl, Adrian J.; Anderson, John F.; Barrera, Roberto; Su, Nan-Yao; Gerry, Alec C.; Obenauer, Peter J.; Campbell, James F.; Lysyk, Tim J.; Allan, Sandra A.

2015-01-01

Effective entomological surveillance planning stresses a careful consideration of methodology, trapping technologies, and analysis techniques. Herein, the basic principles and technological components of arthropod surveillance plans are described, as promoted in the symposium “Advancements in arthropod monitoring technology, techniques, and analysis” presented at the 58th annual meeting of the Entomological Society of America in San Diego, CA. Interdisciplinary examples of arthropod monitoring for urban, medical, and veterinary applications are reviewed. Arthropod surveillance consists of the three components: 1) sampling method, 2) trap technology, and 3) analysis technique. A sampling method consists of selecting the best device or collection technique for a specific location and sampling at the proper spatial distribution, optimal duration, and frequency to achieve the surveillance objective. Optimized sampling methods are discussed for several mosquito species (Diptera: Culicidae) and ticks (Acari: Ixodidae). The advantages and limitations of novel terrestrial and aerial insect traps, artificial pheromones and kairomones are presented for the capture of red flour beetle (Coleoptera: Tenebrionidae), small hive beetle (Coleoptera: Nitidulidae), bed bugs (Hemiptera: Cimicidae), and Culicoides (Diptera: Ceratopogonidae) respectively. After sampling, extrapolating real world population numbers from trap capture data are possible with the appropriate analysis techniques. Examples of this extrapolation and action thresholds are given for termites (Isoptera: Rhinotermitidae) and red flour beetles. PMID:26543242

[Study on spray-drier preparation technology of weitai granules using orthogonal experiments].

PubMed

Qu, Cai-Hong; Yang, Li; Chen, Zhi-Liang

2006-04-01

To screen preparation technique in order to raise the end-product and economical efficiency of spray-drier preparation technology of weitai granules. Newly Fluid-bed-spray-drier-granulation technique was adoped and taken extracting technique, temperature of exit and entry and the matching of accessories as inspecting factors, two levels of each factors, end-product and the water content of semi-finished weitai granules as inspecting marker, the best preparation technique of weitai granules was screened by orthogonal desing. Among the 3 factors, the matching of accessories was most notalbe (P < 0.01), next was the temperature of exit and entry (P < 0.05). However, the extracting technique was of little importance (P > 0.05). The optimum spray-drier granulation technique of weitai granules is A3B1C3.

System engineering techniques for establishing balanced design and performance guidelines for the advanced telerobotic testbed

NASA Technical Reports Server (NTRS)

Zimmerman, W. F.; Matijevic, J. R.

1987-01-01

Novel system engineering techniques have been developed and applied to establishing structured design and performance objectives for the Telerobotics Testbed that reduce technical risk while still allowing the testbed to demonstrate an advancement in state-of-the-art robotic technologies. To estblish the appropriate tradeoff structure and balance of technology performance against technical risk, an analytical data base was developed which drew on: (1) automation/robot-technology availability projections, (2) typical or potential application mission task sets, (3) performance simulations, (4) project schedule constraints, and (5) project funding constraints. Design tradeoffs and configuration/performance iterations were conducted by comparing feasible technology/task set configurations against schedule/budget constraints as well as original program target technology objectives. The final system configuration, task set, and technology set reflected a balanced advancement in state-of-the-art robotic technologies, while meeting programmatic objectives and schedule/cost constraints.

Materials, devices, techniques, and applications for Z-plane focal plane array technology II; Proceedings of the Meeting, San Diego, CA, July 12, 13, 1990

NASA Astrophysics Data System (ADS)

Carson, John C.

1990-11-01

Various papers on materials, devices, techniques, and applications for X-plane focal plane array technology are presented. Individual topics addressed include: application of Z-plane technology to the remote sensing of the earth from GEO, applications of smart neuromorphic focal planes, image-processing of Z-plane technology, neural network Z-plane implementation with very high interconnection rates, using a small IR surveillance satellite for tactical applications, establishing requirements for homing applications, Z-plane technology. Also discussed are: on-array spike suppression signal processing, algorithms for on-focal-plane gamma circumvention and time-delay integration, current HYMOSS Z-technology, packaging of electrons for on- and off-FPA signal processing, space/performance qualification of tape automated bonded devices, automation in tape automated bonding, high-speed/high-volume radiometric testing of Z-technology focal planes, 128-layer HYMOSS-module fabrication issues, automation of IRFPA production processes.

A concise guide for the determination of less-studied technology-critical elements (Nb, Ta, Ga, In, Ge, Te) by inductively coupled plasma mass spectrometry in environmental samples

NASA Astrophysics Data System (ADS)

Filella, Montserrat; Rodushkin, Ilia

2018-03-01

There is an increasing demand for analytical techniques able to measure so-called 'technology-critical elements', a set of chemical elements increasingly used in technological applications, in environmental matrices. Nowadays, inductively coupled plasma-mass spectrometry (ICP-MS) has become the technique of choice for measuring trace element concentrations. However, its application is often less straightforward than often assumed. The hints and drawbacks of ICP-MS application to the measurement of a set of less-studied technology-critical elements (Nb, Ta, Ga, In, Ge and Te) is discussed here and concise guidelines given.

Toward identifying specification requirements for digital bone-anchored prosthesis design incorporating substructure fabrication: a pilot study.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter

2006-01-01

This paper is the first in a series that aims to identify the specification requirements for advanced digital technologies that may be used to design and fabricate complex, soft tissue facial prostheses. Following a review of previously reported techniques, appropriate and currently available technologies were selected and applied in a pilot study. This study uses a range of optical surface scanning, computerized tomography, computer-aided design, and rapid prototyping technologies to capture, design, and fabricate a bone-anchored auricular prosthesis, including the retentive components. The techniques are assessed in terms of their effectiveness, and the results are used to identify future research and specification requirements to direct developments. The case study identifies that while digital technologies may be used to design implant-retained facial prostheses, many limitations need to be addressed to make the techniques clinically viable. It also identifies the need to develop a more robust specification that covers areas such as resolution, accuracy, materials, and design, against which potential technologies may be assessed. There is a need to develop a specification against which potential technologies may be assessed for their suitability in soft tissue facial prosthetics. The specification will be developed using further experimental research studies.

Using detailed inter-network simulation and model abstraction to investigate and evaluate joint battlespace infosphere (JBI) support technologies

NASA Astrophysics Data System (ADS)

Green, David M.; Dallaire, Joel D.; Reaper, Jerome H.

2004-08-01

The Joint Battlespace Infosphere (JBI) program is performing a technology investigation into global communications, data mining and warehousing, and data fusion technologies by focusing on techniques and methodologies that support twenty first century military distributed collaboration. Advancement of these technologies is vitally important if military decision makers are to have the right data, in the right format, at the right time and place to support making the right decisions within available timelines. A quantitative understanding of individual and combinational effects arising from the application of technologies within a framework is presently far too complex to evaluate at more than a cursory depth. In order to facilitate quantitative analysis under these circumstances, the Distributed Information Enterprise Modeling and Simulation (DIEMS) team was formed to apply modeling and simulation (M&S) techniques to help in addressing JBI analysis challenges. The DIEMS team has been tasked utilizing collaborative distributed M&S architectures to quantitatively evaluate JBI technologies and tradeoffs. This paper first presents a high level view of the DIEMS project. Once this approach has been established, a more concentrated view of the detailed communications simulation techniques used in generating the underlying support data sets is presented.

The application of phase grating to CLM technology for the sub-65nm node optical lithography

NASA Astrophysics Data System (ADS)

Yoon, Gi-Sung; Kim, Sung-Hyuck; Park, Ji-Soong; Choi, Sun-Young; Jeon, Chan-Uk; Shin, In-Kyun; Choi, Sung-Woon; Han, Woo-Sung

2005-06-01

As a promising technology for sub-65nm node optical lithography, CLM(Chrome-Less Mask) technology among RETs(Resolution Enhancement Techniques) for low k1 has been researched worldwide in recent years. CLM has several advantages, such as relatively simple manufacturing process and competitive performance compared to phase-edge PSM's. For the low-k1 lithography, we have researched CLM technique as a good solution especially for sub-65nm node. As a step for developing the sub-65nm node optical lithography, we have applied CLM technology in 80nm-node lithography with mesa and trench method. From the analysis of the CLM technology in the 80nm lithography, we found that there is the optimal shutter size for best performance in the technique, the increment of wafer ADI CD varied with pattern's pitch, and a limitation in patterning various shapes and size by OPC dead-zone - OPC dead-zone in CLM technique is the specific region of shutter size that dose not make the wafer CD increased more than a specific size. And also small patterns are easily broken, while fabricating the CLM mask in mesa method. Generally, trench method has better optical performance than mesa. These issues have so far restricted the application of CLM technology to a small field. We approached these issues with 3-D topographic simulation tool and found that the issues could be overcome by applying phase grating in trench-type CLM. With the simulation data, we made some test masks which had many kinds of patterns with many different conditions and analyzed their performance through AIMS fab 193 and exposure on wafer. Finally, we have developed the CLM technology which is free of OPC dead-zone and pattern broken in fabrication process. Therefore, we can apply the CLM technique into sub-65nm node optical lithography including logic devices.

Display Techniques for Advanced Crew Stations (DTACS). Phase 1. Display Techniques Study.

DTIC Science & Technology

1984-03-01

26 3.1.3 Off Screen Displays .. ................... 27 3.1.4 Flat Panel Displays. .. ................. 27 3.2 FORMAT REQUIREMENTS...Head-Up Display ....... .................... ... 96 4.5.2 Display Panel .... ................. 98 4.5.3 RGB Calligraphic Display ................ 99...117 3.4 VOICE WARNING/RESPONSE TECHNOLOGY .............. . i.117 5.5 TOUCH PANEL TECHNOLOGY ..... ................ ... 118 5.6

Techniques Use by Science, Technology and Mathematics (STM) Teachers for Controlling Undesirable Classroom Behaviours in Anambra State Secondary Schools

ERIC Educational Resources Information Center

Chinelo, Okigbo Ebele; Nwanneka, Okoli Josephine

2016-01-01

This study investigated the techniques used by secondary school Science Technology and Mathematics (STM) teachers in controlling undesirable behaviours in their classrooms. It adopted descriptive survey design in which 178 Anambra State teachers teaching STM subjects in senior secondary were involved in the research. Two sections of questionnaire…

The Mind Research Network - Mental Illness Neuroscience Discovery Grant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, J.; Calhoun, V.

The scientific and technological programs of the Mind Research Network (MRN), reflect DOE missions in basic science and associated instrumentation, computational modeling, and experimental techniques. MRN's technical goals over the course of this project have been to develop and apply integrated, multi-modality functional imaging techniques derived from a decade of DOE-support research and technology development.

Sensors research and technology

NASA Technical Reports Server (NTRS)

Cutts, James A.

1988-01-01

Information on sensors research and technology is given in viewgraph form. Information is given on sensing techniques for space science, passive remote sensing techniques and applications, submillimeter coherent sensing, submillimeter mixers and local oscillator sources, non-coherent sensors, active remote sensing, solid state laser development, a low vibration cooler, separation of liquid helium and vapor phase in zero gravity, and future plans.

CMMI(Registered) for Services, Version 1.3

DTIC Science & Technology

2010-11-01

ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security techniques – Information Security Management Systems – Requirements [ ISO /IEC 2005...Commission. ISO /IEC 27001 Information Technology – Security Techniques – Information Security Management Systems – Requirements, 2005. http...CMM or International Organization for Standardization ( ISO ) 9001, you will immediately recognize many similarities in their structure and content

CMMI(Registered) for Acquisition, Version 1.3. CMMI-ACQ, V1.3

DTIC Science & Technology

2010-11-01

and Software Engineering – System Life Cycle Processes [ ISO 2008b] ISO /IEC 27001 :2005 Information technology – Security techniques – Information...International Organization for Standardization and International Electrotechnical Commission. ISO /IEC 27001 Information Technology – Security Techniques...International Organization for Standardization/International Electrotechnical Commission ( ISO /IEC) body of standards. CMMs focus on improving processes

Laser-based standoff detection of explosives: a critical review.

PubMed

Wallin, Sara; Pettersson, Anna; Ostmark, Henric; Hobro, Alison

2009-09-01

A review of standoff detection technologies for explosives has been made. The review is focused on trace detection methods (methods aiming to detect traces from handling explosives or the vapours surrounding an explosive charge due to the vapour pressure of the explosive) rather than bulk detection methods (methods aiming to detect the bulk explosive charge). The requirements for standoff detection technologies are discussed. The technologies discussed are mostly laser-based trace detection technologies, such as laser-induced-breakdown spectroscopy, Raman spectroscopy, laser-induced-fluorescence spectroscopy and IR spectroscopy but the bulk detection technologies millimetre wave imaging and terahertz spectroscopy are also discussed as a complement to the laser-based methods. The review includes novel techniques, not yet tested in realistic environments, more mature technologies which have been tested outdoors in realistic environments as well as the most mature millimetre wave imaging technique.

FNV: light-weight flash-based network and pathway viewer.

PubMed

Dannenfelser, Ruth; Lachmann, Alexander; Szenk, Mariola; Ma'ayan, Avi

2011-04-15

Network diagrams are commonly used to visualize biochemical pathways by displaying the relationships between genes, proteins, mRNAs, microRNAs, metabolites, regulatory DNA elements, diseases, viruses and drugs. While there are several currently available web-based pathway viewers, there is still room for improvement. To this end, we have developed a flash-based network viewer (FNV) for the visualization of small to moderately sized biological networks and pathways. Written in Adobe ActionScript 3.0, the viewer accepts simple Extensible Markup Language (XML) formatted input files to display pathways in vector graphics on any web-page providing flexible layout options, interactivity with the user through tool tips, hyperlinks and the ability to rearrange nodes on the screen. FNV was utilized as a component in several web-based systems, namely Genes2Networks, Lists2Networks, KEA, ChEA and PathwayGenerator. In addition, FVN can be used to embed pathways inside pdf files for the communication of pathways in soft publication materials. FNV is available for use and download along with the supporting documentation and sample networks at http://www.maayanlab.net/FNV. avi.maayan@mssm.edu.

Time-Series Photographs of the Sea Floor in Western Massachusetts Bay: June 1998 to May 1999

USGS Publications Warehouse

Butman, Bradford; Alexander, P. Soupy; Bothner, Michael H.

2004-01-01

This report presents time-series photographs of the sea floor obtained from an instrumented tripod deployed at Site A in western Massachusetts Bay (42? 22.6' N., 70? 47.0' W., 30 m water depth, figure 1) from June 1998 through May 1999. Site A is approximately 1 km south of an ocean outfall that began discharging treated sewage effluent from the Boston metropolitan area into Massachusetts Bay in September 2000. Time-series photographs and oceanographic observations were initiated at Site A in December 1989 and are anticipated to continue to September 2005. This one of a series of reports that present these images in digital form. The objective of these reports is to enable easy and rapid viewing of the photographs and to provide a medium-resolution digital archive. The images, obtained every 4 hours, are presented as a movie (in .avi format, which may be viewed using an image viewer such as QuickTime or Windows Media Player) and as individual images (.tif format). The images provide time-series observations of changes of the sea floor and near-bottom water properties.

Hippocampus minor and man's place in nature: a case study in the social construction of neuroanatomy.

PubMed

Gross, C G

1993-10-01

In mid-19th century Britain the possibility of evolution and particularly the evolution of man from apes was vigorously contested. Among the leading antievolutionists was the celebrated anatomist and paleontologist Richard Owen and among the leading defenders of evolution was Thomas Henry Huxley. The central dispute between them on human evolution was whether or not man's brain was fundamentally unique in having a hippocampus minor (known today as the calcar avis), a posterior horn in the lateral ventricle, and a posterior lobe. The author considers the background of this controversy, the origin and fate of the term hippocampus minor, why this structure became central to the question of human evolution, and how Huxley used it to support both Darwinism and the political ascendancy of Darwinians. The use of ventricular structures to distinguish humans from other animals appears to reflect an importance given to the ventricles that stretches back to ancient Greek medicine. This account illustrates both the extraordinary persistence of ideas in biology and the role of the political and social matrix in the study of the brain.

Ebola Virus Infection: a review on the pharmacokinetic and pharmacodynamic properties of drugs considered for testing in human efficacy trials

PubMed Central

Madelain, Vincent; Nguyen, Thi Huyen Tram; Olivo, Anaelle; De Lamballerie, Xavier; Guedj, Jeremie; Taburet, Anne-Marie; Mentré, France

2016-01-01

The 2014–2015 outbreak of Ebola virus disease (EVD) is the largest epidemic to date in terms of number of cases, of death and affected areas. In October 2015, no antiviral agents had proven an antiviral efficacy in patients. However in September 2014 WHO inventoried and regularly updated since then a list of potential drug candidates with demonstrated antiviral efficacy in vitro or in animal models. This includes agents belonging to various therapeutic classes, namely direct antiviral agents (favipiravir and BCX4430), combination of antibodies (ZMapp), type I interferons, RNA interference-based drugs (TKM-Ebola and AVI-7537) and anticoagulant drug (rNAPc2). Here, we review the pharmacokinetic and pharmacodynamic information that are presently available on these drugs, using data obtained in healthy volunteers for pharmacokinetics and data obtained in human clinical trials or animal models for pharmacodynamics. Future studies evaluating these drugs in clinical trials will be critical to confirm their efficacy in humans, propose appropriate doses and evaluate the possibility of treatment combinations. PMID:26798032

Recent technological advancements in tuberculosis diagnostics - A review.

PubMed

Gupta, Shagun; Kakkar, Vipan

2018-09-15

Early diagnosis and on-time effective treatment are indispensable for Tuberculosis (TB) control - a life threatening infectious communicable disease. The conventional techniques for diagnosing TB normally take two to three weeks. This delay in diagnosis and further increase in detection complexity due to the emerging risks of XDR-TB (Extensively drug Resistant-TB) and MDR-TB (Multidrug Resistant-TB) are evoking interest of researchers in the field of developing rapid TB detection techniques such as biosensing and other point-of-care (POC) techniques. Biosensing technologies along with the collaboration with nanotechnology have enormous potential to boost the MTB detection and for overall management in clinical diagnosis. A diverse range of portable, sensitive and rapid biosensors based on different signal transducer principles and with different biomarkers detection capabilities have been developed for TB detection in the early stages. Further, a lot of progress has been achieved over the years in developing various point-of-care diagnostic tools including non-molecular methods and molecular techniques. The objective of this study is to present a succinct review of the available TB detection techniques that are either in use or under development. The focus of this review is on the current developments occurred in nano-biosensing technologies. A synopsis of ameliorations in different non-molecular diagnostic tools and progress in the field of molecular techniques along with the role of emerging Lab-on-Chip technology for diagnosing and mitigating the TB consequences have also been presented. Copyright © 2018 Elsevier B.V. All rights reserved.

The role of printing techniques for large-area dye sensitized solar cells

NASA Astrophysics Data System (ADS)

Mariani, Paolo; Vesce, Luigi; Di Carlo, Aldo

2015-10-01

The versatility of printing technologies and their intrinsic ability to outperform other techniques in large-area deposition gives scope to revolutionize the photovoltaic (PV) manufacturing field. Printing methods are commonly used in conventional silicon-based PVs to cover part of the production process. Screen printing techniques, for example, are applied to deposit electrical contacts on the silicon wafer. However, it is with the advent of third generation PVs that printing/coating techniques have been extensively used in almost all of the manufacturing processes. Among all the third generation PVs, dye sensitized solar cell (DSSC) technology has been developed up to commercialization levels. DSSCs and modules can be fabricated by adopting all of the main printing techniques on both rigid and flexible substrates. This allows an easy tuning of cell/module characteristics to the desired application. Transparency, colour, shape, layout and other DSSC’s features can be easily varied by changing the printing parameters and paste/ink formulations used in the printing process. This review focuses on large-area printing/coating technologies for the fabrication of DSSCs devices. The most used and promising techniques are presented underlining the process parameters and applications.

Educational Research and "Human Techniques" in the Global Technological System: The Theory of Jacques Ellul.

ERIC Educational Resources Information Center

Waks, Leonard J.

The French sociologist Jacques Ellul has had great influence on contemporary thought about the role of science and technology in the emerging global society. His books "The Technological Society" (1954) and "The Technological System" (1980) characterize the new social context as a tightly interlocked global technological system…

Thick resist for MEMS processing

NASA Astrophysics Data System (ADS)

Brown, Joe; Hamel, Clifford

2001-11-01

The need for technical innovation is always present in today's economy. Microfabrication methods have evolved in support of the demand for smaller and faster integrated circuits with price performance improvements always in the scope of the manufacturing design engineer. The dispersion of processing technology spans well beyond IC fabrication today with batch fabrication and wafer scale processing lending advantages to MEMES applications from biotechnology to consumer electronics from oil exploration to aerospace. Today the demand for innovative processing techniques that enable technology is apparent where only a few years ago appeared too costly or not reliable. In high volume applications where yield and cost improvements are measured in fractions of a percent it is imperative to have process technologies that produce consistent results. Only a few years ago thick resist coatings were limited to thickness less than 20 microns. Factors such as uniformity, edge bead and multiple coatings made high volume production impossible. New developments in photoresist formulation combined with advanced coating equipment techniques that closely controls process parameters have enable thick photoresist coatings of 70 microns with acceptable uniformity and edge bead in one pass. Packaging of microelectronic and micromechanical devices is often a significant cost factor and a reliability issue for high volume low cost production. Technologies such as flip- chip assembly provide a solution for cost and reliability improvements over wire bond techniques. The processing for such technology demands dimensional control and presents a significant cost savings if it were compatible with mainstream technologies. Thick photoresist layers, with good sidewall control would allow wafer-bumping technologies to penetrate the barriers to yield and production where costs for technology are the overriding issue. Single pass processing is paramount to the manufacturability of packaging technology. Uniformity and edge bead control defined the success of process implementation. Today advanced packaging solutions are created with thick photoresist coatings. The techniques and results will be presented.

75 FR 27344 - Agency Information Collection Request. 30-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... techniques or other forms of information technology to minimize the information collection burden. To obtain...-NEW--Office of the National Coordinator for Health Information Technology. Abstract: Recognizing the potential of health information technology (IT), Congress incorporated the Health Information Technology for...

Secure Quantum Technologies

NASA Astrophysics Data System (ADS)

Malik, Mehul

Over the past three decades, quantum mechanics has allowed the development of technologies that provide unconditionally secure communication. In parallel, the quantum nature of the transverse electromagnetic field has spawned the field of quantum imaging that encompasses technologies such as quantum lithography, quantum ghost imaging, and high-dimensional quantum key distribution (QKD). The emergence of such quantum technologies also highlights the need for the development of accurate and efficient methods of measuring and characterizing the elusive quantum state itself. In this thesis, I present new technologies that use the quantum properties of light for security. The first of these is a technique that extends the principles behind QKD to the field of imaging and optical ranging. By applying the polarization-based BB84 protocol to individual photons in an active imaging system, we obtained images that were secure against any intercept-resend jamming attacks. The second technology presented in this thesis is based on an extension of quantum ghost imaging, a technique that uses position-momentum entangled photons to create an image of an object without directly gaining any spatial information from it. We used a holographic filtering technique to build a quantum ghost image identification system that uses a few pairs of photons to identify an object from a set of known objects. The third technology addressed in this thesis is a high-dimensional QKD system that uses orbital-angular-momentum (OAM) modes of light for encoding. Moving to a high-dimensional state space in QKD allows one to impress more information on each photon, as well as introduce higher levels of security. I discuss the development of two OAM-QKD protocols based on the BB84 and Ekert protocols of QKD. In addition, I present a study characterizing the effects of turbulence on a communication system using OAM modes for encoding. The fourth and final technology presented in this thesis is a relatively new technique called direct measurement that uses sequential weak and strong measurements to characterize a quantum state. I use this technique to characterize the quantum state of a photon with a dimensionality of d = 27, and visualize its rotation in the natural basis of OAM.

OCT evaluation of single ceramic crowns: comparison between conventional and chair-side CAD/CAM technologies

NASA Astrophysics Data System (ADS)

Gabor, A.; Jivanescu, A.; Zaharia, C.; Hategan, S.; Topala, F. I.; Levai, C. M.; Negrutiu, M. L.; Sinescu, C.; Duma, V.-F.; Bradu, A.; Podoleanu, A. Gh.

2016-03-01

Digital impressions were introduced to overcome some of the obstacles due to traditional impression materials and techniques. The aim of this in vitro study is to compare the accuracy of all ceramic crowns obtained with digital impression and CAD-CAM technology with the accuracy of those obtained with conventional impression techniques. Two groups of 10 crowns each have been considered. The digital data obtained from Group 1 have been processed and the all-ceramic crowns were milled with a CAD/CAM technology (CEREC MCX, Sirona). The all ceramic crowns in Group 2 were obtained with the classical technique of pressing (emax, Ivoclar, Vivadent). The evaluation of the marginal adaptation was performed with Time Domain Optical Coherence Tomography (TD OCT), working at a wavelength of 1300 nm. Tri-dimensional (3D) reconstructions of the selected areas were obtained. Based on the findings in this study, one may conclude that the marginal accuracy of all ceramic crowns fabricated with digital impression and the CAD/CAM technique is superior to the conventional impression technique.

Quantitative optical metrology with CMOS cameras

NASA Astrophysics Data System (ADS)

Furlong, Cosme; Kolenovic, Ervin; Ferguson, Curtis F.

2004-08-01

Recent advances in laser technology, optical sensing, and computer processing of data, have lead to the development of advanced quantitative optical metrology techniques for high accuracy measurements of absolute shapes and deformations of objects. These techniques provide noninvasive, remote, and full field of view information about the objects of interest. The information obtained relates to changes in shape and/or size of the objects, characterizes anomalies, and provides tools to enhance fabrication processes. Factors that influence selection and applicability of an optical technique include the required sensitivity, accuracy, and precision that are necessary for a particular application. In this paper, sensitivity, accuracy, and precision characteristics in quantitative optical metrology techniques, and specifically in optoelectronic holography (OEH) based on CMOS cameras, are discussed. Sensitivity, accuracy, and precision are investigated with the aid of National Institute of Standards and Technology (NIST) traceable gauges, demonstrating the applicability of CMOS cameras in quantitative optical metrology techniques. It is shown that the advanced nature of CMOS technology can be applied to challenging engineering applications, including the study of rapidly evolving phenomena occurring in MEMS and micromechatronics.

Advanced imaging technologies for mapping cadaveric lymphatic anatomy: magnetic resonance and computed tomography lymphangiography.

PubMed

Pan, W R; Rozen, W M; Stretch, J; Thierry, B; Ashton, M W; Corlett, R J

2008-09-01

Lymphatic anatomy has become increasingly clinically important as surgical techniques evolve for investigating and treating cancer metastases. However, due to limited anatomical techniques available, research in this field has been insufficient. The techniques of computed tomography (CT) and magnetic resonance (MR) lymphangiography have not been described previously in the imaging of cadaveric lymphatic anatomy. This preliminary work describes the feasibility of these advanced imaging technologies for imaging lymphatic anatomy. A single, fresh cadaveric lower limb underwent lymphatic dissection and cannulation utilizing microsurgical techniques. Contrast materials for both CT and MR studies were chosen based on their suitability for subsequent clinical use, and imaging was undertaken with a view to mapping lymphatic anatomy. Microdissection studies were compared with imaging findings in each case. Both MR-based and CT-based contrast media in current clinical use were found to be suitable for demonstrating cadaveric lymphatic anatomy upon direct intralymphatic injection. MR lymphangiography and CT lymphangiography are feasible modalities for cadaveric anatomical research for lymphatic anatomy. Future studies including refinements in scanning techniques may offer these technologies to the clinical setting.

Aerospace technology can be applied to exploration 'back on earth'. [offshore petroleum resources

NASA Technical Reports Server (NTRS)

Jaffe, L. D.

1977-01-01

Applications of aerospace technology to petroleum exploration are described. Attention is given to seismic reflection techniques, sea-floor mapping, remote geochemical sensing, improved drilling methods and down-hole acoustic concepts, such as down-hole seismic tomography. The seismic reflection techniques include monitoring of swept-frequency explosive or solid-propellant seismic sources, as well as aerial seismic surveys. Telemetry and processing of seismic data may also be performed through use of aerospace technology. Sea-floor sonor imaging and a computer-aided system of geologic analogies for petroleum exploration are also considered.

Culture without the petri-dish.

PubMed

Thompson, Jeremy G

2007-01-01

Automation of oocyte maturation and embryo production techniques is a new and exciting development in the field of reproductive technologies. There are two areas where increased automation is having an impact: in the area of embryo diagnostics and in the process of embryo production itself. Benefits include decreased staffing and skill requirements for production and assessment of embryos, as well as increasing quality management systems by removing the "human" factor. However, the uptake of new technologies is likely to be slow, as costs and the conservative nature of the Assisted Reproduction Technology industry to adopt new techniques.

Evaluation of automobiles with alternative fuels utilizing multicriteria techniques

NASA Astrophysics Data System (ADS)

Brey, J. J.; Contreras, I.; Carazo, A. F.; Brey, R.; Hernández-Díaz, A. G.; Castro, A.

This work applies the non-parametric technique of Data Envelopment Analysis (DEA) to conduct a multicriteria comparison of some existing and under development technologies in the automotive sector. The results indicate that some of the technologies under development, such as hydrogen fuel cell vehicles, can be classified as efficient when evaluated in function of environmental and economic criteria, with greater importance being given to the environmental criteria. The article also demonstrates the need to improve the hydrogen-based technology, in comparison with the others, in aspects such as vehicle sale costs and fuel price.

Nanotechnology and chip level systems for pressure driven liquid chromatography and emerging analytical separation techniques: a review.

PubMed

Lavrik, N V; Taylor, L T; Sepaniak, M J

2011-05-23

Pressure driven liquid chromatography (LC) is a powerful and versatile separation technique particularly suitable for differentiating species present in extremely small quantities. This paper briefly reviews main historical trends and focuses on more recently developed technological approaches in miniaturization and on-chip integration of LC columns. The review emphasizes enabling technologies as well as main technological challenges specific to pressure driven separations and highlights emerging concepts that could ultimately overcome fundamental limitations of conventional LC columns. Copyright © 2011 Elsevier B.V. All rights reserved.

Transcriptomics in cancer diagnostics: developments in technology, clinical research and commercialization.

PubMed

Sager, Monica; Yeat, Nai Chien; Pajaro-Van der Stadt, Stefan; Lin, Charlotte; Ren, Qiuyin; Lin, Jimmy

2015-01-01

Transcriptomic technologies are evolving to diagnose cancer earlier and more accurately to provide greater predictive and prognostic utility to oncologists and patients. Digital techniques such as RNA sequencing are replacing still-imaging techniques to provide more detailed analysis of the transcriptome and aberrant expression that causes oncogenesis, while companion diagnostics are developing to determine the likely effectiveness of targeted treatments. This article examines recent advancements in molecular profiling research and technology as applied to cancer diagnosis, clinical applications and predictions for the future of personalized medicine in oncology.

Quantitative ultrasonic evaluation of engineering properties in metals, composites and ceramics

NASA Technical Reports Server (NTRS)

Vary, A.

1980-01-01

Ultrasonic technology from the perspective of nondestructive evaluation approaches to material strength prediction and property verification is reviewed. Emergent advanced technology involving quantitative ultrasonic techniques for materials characterization is described. Ultrasonic methods are particularly useful in this area because they involve mechanical elastic waves that are strongly modulated by the same morphological factors that govern mechanical strength and dynamic failure processes. It is emphasized that the technology is in its infancy and that much effort is still required before all the available techniques can be transferred from laboratory to industrial environments.

THE MAN MADE WORLD, A HIGH SCHOOL COURSE ON THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

THIS STUDENTS' MANUAL FOR THE ENGINEERING CONCEPTS CURRICULUM PROJECT'S (ECCP) HIGH SCHOOL COURSE, "THE MAN MADE WORLD," IS THE THIRD DRAFT OF THE EXPERIMENTAL VERSION. THE MATERIAL WRITTEN BY SCIENTISTS, ENGINEERS, AND EDUCATORS, EMPHASIZES THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION. RESOURCES OF THE MAN-MADE…

Systems Security Engineering

DTIC Science & Technology

2010-08-22

practice for information security management ( ISO /IEC 27002 ),” “Information technology — Security techniques — Information security management...systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security techniques — Information security risk management ( ISO /IEC 27005).” from...associated practice aids. Perhaps the most germane discovery from this effort was a draft ISO standard on Systems and software engineering, Systems and

Statistical assessment of the learning curves of health technologies.

PubMed

Ramsay, C R; Grant, A M; Wallace, S A; Garthwaite, P H; Monk, A F; Russell, I T

2001-01-01

(1) To describe systematically studies that directly assessed the learning curve effect of health technologies. (2) Systematically to identify 'novel' statistical techniques applied to learning curve data in other fields, such as psychology and manufacturing. (3) To test these statistical techniques in data sets from studies of varying designs to assess health technologies in which learning curve effects are known to exist. METHODS - STUDY SELECTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): For a study to be included, it had to include a formal analysis of the learning curve of a health technology using a graphical, tabular or statistical technique. METHODS - STUDY SELECTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): For a study to be included, it had to include a formal assessment of a learning curve using a statistical technique that had not been identified in the previous search. METHODS - DATA SOURCES: Six clinical and 16 non-clinical biomedical databases were searched. A limited amount of handsearching and scanning of reference lists was also undertaken. METHODS - DATA EXTRACTION (HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW): A number of study characteristics were abstracted from the papers such as study design, study size, number of operators and the statistical method used. METHODS - DATA EXTRACTION (NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH): The new statistical techniques identified were categorised into four subgroups of increasing complexity: exploratory data analysis; simple series data analysis; complex data structure analysis, generic techniques. METHODS - TESTING OF STATISTICAL METHODS: Some of the statistical methods identified in the systematic searches for single (simple) operator series data and for multiple (complex) operator series data were illustrated and explored using three data sets. The first was a case series of 190 consecutive laparoscopic fundoplication procedures performed by a single surgeon; the second was a case series of consecutive laparoscopic cholecystectomy procedures performed by ten surgeons; the third was randomised trial data derived from the laparoscopic procedure arm of a multicentre trial of groin hernia repair, supplemented by data from non-randomised operations performed during the trial. RESULTS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: Of 4571 abstracts identified, 272 (6%) were later included in the study after review of the full paper. Some 51% of studies assessed a surgical minimal access technique and 95% were case series. The statistical method used most often (60%) was splitting the data into consecutive parts (such as halves or thirds), with only 14% attempting a more formal statistical analysis. The reporting of the studies was poor, with 31% giving no details of data collection methods. RESULTS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: Of 9431 abstracts assessed, 115 (1%) were deemed appropriate for further investigation and, of these, 18 were included in the study. All of the methods for complex data sets were identified in the non-clinical literature. These were discriminant analysis, two-stage estimation of learning rates, generalised estimating equations, multilevel models, latent curve models, time series models and stochastic parameter models. In addition, eight new shapes of learning curves were identified. RESULTS - TESTING OF STATISTICAL METHODS: No one particular shape of learning curve performed significantly better than another. The performance of 'operation time' as a proxy for learning differed between the three procedures. Multilevel modelling using the laparoscopic cholecystectomy data demonstrated and measured surgeon-specific and confounding effects. The inclusion of non-randomised cases, despite the possible limitations of the method, enhanced the interpretation of learning effects. CONCLUSIONS - HEALTH TECHNOLOGY ASSESSMENT LITERATURE REVIEW: The statistical methods used for assessing learning effects in health technology assessment have been crude and the reporting of studies poor. CONCLUSIONS - NON-HEALTH TECHNOLOGY ASSESSMENT LITERATURE SEARCH: A number of statistical methods for assessing learning effects were identified that had not hitherto been used in health technology assessment. There was a hierarchy of methods for the identification and measurement of learning, and the more sophisticated methods for both have had little if any use in health technology assessment. This demonstrated the value of considering fields outside clinical research when addressing methodological issues in health technology assessment. CONCLUSIONS - TESTING OF STATISTICAL METHODS: It has been demonstrated that the portfolio of techniques identified can enhance investigations of learning curve effects. (ABSTRACT TRUNCATED)

VOLATILE ORGANIC COMPOUNDS (VOC) RECOVERY ...

EPA Pesticide Factsheets

The purpose of the seminar was to bring researchers, technology developers, and industry representatives together to discuss recovery technologies and techniques for VOCs. The seminar focused on the specific VOC recovery needs of industry and on case studies that summarize effective VOC product recovery techniques applicable to air, water, and solid waste. The case studies highlighted examples in which existing and new recovery technologies resulted in significant cost savings to industry. The seminar focused on the following key issues:. Status and future direction of EPA< DOE, and other major research programs.. What are the latest technology innovations in VOC treatment and recovery?. Performance and cost effectiveness of VOC recovery techniques.. How are recovery techniques applied to air, water, and solid waste?Presenters were from industry, academia, EPA, and various consulting firms. The presentations were followed by several facilitated breakout sessions; these sessions allowed participants an opportunity to discuss their needs and opinions on VOC recovery trends, research, and other issues.This document contains summaries of the presentations and discussions during the seminar. It does not constitute an actual proceedings, since the presentations were informal and no written versions were required. The list of participants and contact information are included in Appendix A. Information

Imaging Techniques for Clinical Burn Assessment with a Focus on Multispectral Imaging

PubMed Central

Thatcher, Jeffrey E.; Squiers, John J.; Kanick, Stephen C.; King, Darlene R.; Lu, Yang; Wang, Yulin; Mohan, Rachit; Sellke, Eric W.; DiMaio, J. Michael

2016-01-01

Significance: Burn assessments, including extent and severity, are some of the most critical diagnoses in burn care, and many recently developed imaging techniques may have the potential to improve the accuracy of these evaluations. Recent Advances: Optical devices, telemedicine, and high-frequency ultrasound are among the highlights in recent burn imaging advancements. We present another promising technology, multispectral imaging (MSI), which also has the potential to impact current medical practice in burn care, among a variety of other specialties. Critical Issues: At this time, it is still a matter of debate as to why there is no consensus on the use of technology to assist burn assessments in the United States. Fortunately, the availability of techniques does not appear to be a limitation. However, the selection of appropriate imaging technology to augment the provision of burn care can be difficult for clinicians to navigate. There are many technologies available, but a comprehensive review summarizing the tissue characteristics measured by each technology in light of aiding clinicians in selecting the proper device is missing. This would be especially valuable for the nonburn specialists who encounter burn injuries. Future Directions: The questions of when burn assessment devices are useful to the burn team, how the various imaging devices work, and where the various burn imaging technologies fit into the spectrum of burn care will continue to be addressed. Technologies that can image a large surface area quickly, such as thermography or laser speckle imaging, may be suitable for initial burn assessment and triage. In the setting of presurgical planning, ultrasound or optical microscopy techniques, including optical coherence tomography, may prove useful. MSI, which actually has origins in burn care, may ultimately meet a high number of requirements for burn assessment in routine clinical use. PMID:27602255

Stretching Your Technology Dollar

ERIC Educational Resources Information Center

Johnson, Doug

2012-01-01

A school district technology director offers 10 strategies to help schools make the most of their technology dollar. These include using effective budgeting techniques, taking advantage of the buying power of groups, practicing sustainable technology, purchasing the right tool for the right job, taking advantage of free software, using cloud…

75 FR 52508 - Proposed Information Collection; Comment Request; Information and Communication Technology Survey

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... conduct the 2010 through 2012 Information and Communication Technology Survey (ICTS). The annual survey... payments) for four types of information and communication technology equipment and software (computers and... through the use of automated collection techniques or other forms of information technology. Comments...

Improving K-12 STEM Education Outcomes through Technological Integration

ERIC Educational Resources Information Center

Urban, Michael J., Ed.; Falvo, David A., Ed.

2016-01-01

The application of technology in classroom settings has equipped educators with innovative tools and techniques for effective teaching practice. Integrating digital technologies at the elementary and secondary levels helps to enrich the students' learning experience and maximize competency in the areas of science, technology, engineering, and…

Research on the development of green chemistry technology assessment techniques: a material reutilization case.

PubMed

Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

2015-01-01

This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

Next-Generation Technologies for Multiomics Approaches Including Interactome Sequencing

PubMed Central

Ohashi, Hiroyuki; Miyamoto-Sato, Etsuko

2015-01-01

The development of high-speed analytical techniques such as next-generation sequencing and microarrays allows high-throughput analysis of biological information at a low cost. These techniques contribute to medical and bioscience advancements and provide new avenues for scientific research. Here, we outline a variety of new innovative techniques and discuss their use in omics research (e.g., genomics, transcriptomics, metabolomics, proteomics, and interactomics). We also discuss the possible applications of these methods, including an interactome sequencing technology that we developed, in future medical and life science research. PMID:25649523

Challenges and trends in glucose monitoring technologies

NASA Astrophysics Data System (ADS)

Batra, Padma; Tomar, Reena; Kapoor, Rajiv

2016-03-01

It is known that diabetes is a very serious disease as it may lead to heart attack, kidney failure and neuro diseases. The present study was aimed to review and compare various techniques useful for detecting diabetes or hypoglycemia in human body. In this paper we discuss the invasive and non-invasive techniques which are used for early detection of hypoglycemia or hyperglycemia and highlight their advantages as well as limitations. The use of bio impedance measurement technology has been described as it is an emerging non-invasive technique useful for the same purpose.

Tip-Based Nanofabrication for Scalable Manufacturing

DOE PAGES

Hu, Huan; Kim, Hoe; Somnath, Suhas

2017-03-16

Tip-based nanofabrication (TBN) is a family of emerging nanofabrication techniques that use a nanometer scale tip to fabricate nanostructures. Here in this review, we first introduce the history of the TBN and the technology development. We then briefly review various TBN techniques that use different physical or chemical mechanisms to fabricate features and discuss some of the state-of-the-art techniques. Subsequently, we focus on those TBN methods that have demonstrated potential to scale up the manufacturing throughput. Finally, we discuss several research directions that are essential for making TBN a scalable nano-manufacturing technology.

Tip-Based Nanofabrication for Scalable Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hu, Huan; Kim, Hoe; Somnath, Suhas

Tip-based nanofabrication (TBN) is a family of emerging nanofabrication techniques that use a nanometer scale tip to fabricate nanostructures. Here in this review, we first introduce the history of the TBN and the technology development. We then briefly review various TBN techniques that use different physical or chemical mechanisms to fabricate features and discuss some of the state-of-the-art techniques. Subsequently, we focus on those TBN methods that have demonstrated potential to scale up the manufacturing throughput. Finally, we discuss several research directions that are essential for making TBN a scalable nano-manufacturing technology.

Best practices for minimally invasive procedures.

PubMed

Ulmer, Brenda C

2010-05-01

Techniques and instrumentation for minimally invasive surgical procedures originated in gynecologic surgery, but the benefits of surgery with small incisions or no incisions at all have prompted the expansion of these techniques into numerous specialties. Technologies such as robotic assistance, single-incision laparoscopic surgery, natural orifice transluminal endoscopic surgery, and video-assisted thoracoscopic surgery have led to the continued expansion of minimally invasive surgery into new specialties. With this expansion, perioperative nurses and other members of the surgical team are required to continue to learn about new technology and instrumentation, as well as the techniques and challenges involved in using new technology, to help ensure the safety of their patients. This article explores the development of minimally invasive procedures and offers suggestions for increasing patient safety. Copyright 2010 AORN, Inc. Published by Elsevier Inc. All rights reserved.

PRINTING TECHNIQUES: RECENT DEVELOPMENTS IN PHARMACEUTICAL TECHNOLOGY.

PubMed

Jamroz, Witold; Kurek, Mateusz; Lyszczarz, Ewelina; Brniak, Witold; Jachowicz, Renata

2017-05-01

In the last few years there has been a huge progress in a development of printing techniques and their application in pharmaceutical sciences and particularly in the pharmaceutical technology. The variety of printing methods makes it necessary to systemize them, explain the principles of operation, and specify the possibilities of their use in pharmaceutical technology. This paper aims to review the printing techniques used in a drug development process. The growing interest in 2D and 3D printing methods results in continuously increasing number of scientific papers. Introduction of the first printed drug Spritam@ to the market seems to be a milestone of the 3D printing development. Thus, a particular aim of this review is to show the latest achievements of the researchers in the field of the printing medicines.

[Application of microwave irradiation technology to the field of pharmaceutics].

PubMed

Zhang, Xue-Bing; Shi, Nian-Qiu; Yang, Zhi-Qiang; Wang, Xing-Lin

2014-03-01

Microwaves can be directly transformed into heat inside materials because of their ability of penetrating into any substance. The degree that materials are heated depends on their dielectric properties. Materials with high dielectric loss are more easily to reach a resonant state by microwaves field, then microwaves can be absorbed efficiently. Microwave irradiation technique with the unique heating mechanisms could induce drug-polymer interaction and change the properties of dissolution. Many benefits such as improving product quality, increasing energy efficiency and reducing times can be obtained by microwaves. This paper summarized characteristics of the microwave irradiation technique, new preparation techniques and formulation process in pharmaceutical industry by microwave irradiation technology. The microwave technology provides a new clue for heating and drying in the field of pharmaceutics.

Geothermal Reservoir Well Stimulation Program: technology transfer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-05-01

Each of the following types of well stimulation techniques are summarized and explained: hydraulic fracturing; thermal; mechanical, jetting, and drainhole drilling; explosive and implosive; and injection methods. Current stimulation techniques, stimulation techniques for geothermal wells, areas of needed investigation, and engineering calculations for various techniques. (MHR)

Treating technology as a luxury? 10 necessary tools.

PubMed

Berger, Steven H

2007-02-01

Technology and techniques that every hospital should acquire and use for effective financial management include: Daily dashboards. Balanced scorecards. Benchmarking. Flexible budgeting and monitoring. Labor management systems. Nonlabor management analysis. Service, line, physician, and patient-level reporting and analysis. Cost accounting technology. Contract management technology. Denials management software.

78 FR 50076 - Intent To Request Renewal From OMB of One Current Public Collection of Information: Sensitive...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

... PRA Officer, Office of Information Technology (OIT), TSA-11, Transportation Security Administration... technological collection techniques or other forms of information technology. Information Collection Requirement... Paperwork Reduction Act Officer, Office of Information Technology. [FR Doc. 2013-19973 Filed 8-15-13; 8:45...

The coming paradigm shift: A transition from manual to automated microscopy.

PubMed

Farahani, Navid; Monteith, Corey E

2016-01-01

The field of pathology has used light microscopy (LM) extensively since the mid-19(th) century for examination of histological tissue preparations. This technology has remained the foremost tool in use by pathologists even as other fields have undergone a great change in recent years through new technologies. However, as new microscopy techniques are perfected and made available, this reliance on the standard LM will likely begin to change. Advanced imaging involving both diffraction-limited and subdiffraction techniques are bringing nondestructive, high-resolution, molecular-level imaging to pathology. Some of these technologies can produce three-dimensional (3D) datasets from sampled tissues. In addition, block-face/tissue-sectioning techniques are already providing automated, large-scale 3D datasets of whole specimens. These datasets allow pathologists to see an entire sample with all of its spatial information intact, and furthermore allow image analysis such as detection, segmentation, and classification, which are impossible in standard LM. It is likely that these technologies herald a major paradigm shift in the field of pathology.

Materials technology for Stirling space power converters

NASA Technical Reports Server (NTRS)

Baggenstoss, William; Mittendorf, Donald

1992-01-01

This program was conducted in support of the NASA LeRC development of the Stirling power converter (SPC) for space power applications. The objectives of this contract were: (1) to perform a technology review and analyses to support the evaluation of materials issues for the SPC; (2) to evaluate liquid metal compatibility issues of the SPC; (3) to evaluate and define a transient liquid phase diffusion bonding (TLPDB) process for the SPC joints to the Udimet 720 heater head; and (4) to evaluate alternative (to the TLPDB) joining techniques. In the technology review, several aspects of the current Stirling design were examined including the power converter assembly process, materials joining, gas bearings, and heat exchangers. The supporting analyses included GLIMPS power converter simulation in support of the materials studies, and system level analysis in support of the technology review. The liquid metal compatibility study evaluated process parameters for use in the Stirling power converter. The alternative joining techniques study looked at the applicability of various joining techniques to the Stirling power converter requirements.

Multi-technique hybrid imaging in PET/CT and PET/MR: what does the future hold?

PubMed

de Galiza Barbosa, F; Delso, G; Ter Voert, E E G W; Huellner, M W; Herrmann, K; Veit-Haibach, P

2016-07-01

Integrated positron-emission tomography and computed tomography (PET/CT) is one of the most important imaging techniques to have emerged in oncological practice in the last decade. Hybrid imaging, in general, remains a rapidly growing field, not only in developing countries, but also in western industrialised healthcare systems. A great deal of technological development and research is focused on improving hybrid imaging technology further and introducing new techniques, e.g., integrated PET and magnetic resonance imaging (PET/MRI). Additionally, there are several new PET tracers on the horizon, which have the potential to broaden clinical applications in hybrid imaging for diagnosis as well as therapy. This article aims to highlight some of the major technical and clinical advances that are currently taking place in PET/CT and PET/MRI that will potentially maintain the position of hybrid techniques at the forefront of medical imaging technologies. Copyright © 2016 The Royal College of Radiologists. Published by Elsevier Ltd. All rights reserved.

Survey Of High Speed Test Techniques

NASA Astrophysics Data System (ADS)

Gheewala, Tushar

1988-02-01

The emerging technologies for the characterization and production testing of high-speed devices and integrated circuits are reviewed. The continuing progress in the field of semiconductor technologies will, in the near future, demand test techniques to test 10ps to lOOps gate delays, 10 GHz to 100 GHz analog functions and 10,000 to 100,000 gates on a single chip. Clearly, no single test technique would provide a cost-effective answer to all the above demands. A divide-and-conquer approach based on a judicial selection of parametric, functional and high-speed tests will be required. In addition, design-for-test methods need to be pursued which will include on-chip test electronics as well as circuit techniques that minimize the circuit performance sensitivity to allowable process variations. The electron and laser beam based test technologies look very promising and may provide the much needed solutions to not only the high-speed test problem but also to the need for high levels of fault coverage during functional testing.

Anchoring protein crystals to mounting loops with hydrogel using inkjet technology.

PubMed

Shinoda, Akira; Tanaka, Yoshikazu; Yao, Min; Tanaka, Isao

2014-11-01

X-ray crystallography is an important technique for structure-based drug discovery, mainly because it is the only technique that can reveal whether a ligand binds to the target protein as well as where and how it binds. However, ligand screening by X-ray crystallography involves a crystal-soaking experiment, which is usually performed manually. Thus, the throughput is not satisfactory for screening large numbers of candidate ligands. In this study, a technique to anchor protein crystals to mounting loops by using gel and inkjet technology has been developed; the method allows soaking of the mounted crystals in ligand-containing solution. This new technique may assist in the design of a fully automated drug-screening pipeline.

Extraction and purification of high added value compounds from by-products of the winemaking chain using alternative/nonconventional processes/technologies.

PubMed

Yammine, Sami; Brianceau, Sylène; Manteau, Sébastien; Turk, Mohammad; Ghidossi, Rémy; Vorobiev, Eugène; Mietton-Peuchot, Martine

2018-05-24

Grape byproducts are today considered as a cheap source of valuable compounds since existent technologies allow the recovery of target compounds and their recycling. The goal of the current article is to explore the different recovery stages used by both conventional and alternative techniques and processes. Alternative pre-treatments techniques reviewed are: ultrasounds, pulsed electric fields and high voltage discharges. In addition, nonconventional solvent extraction under high pressure, specifically, supercritical fluid extraction and subcritical water extraction are discussed. Finally alternative purification technologies, for example membrane processing were also examined. The intent is to describe the mechanisms involved by these alternative technologies and to summarize the work done on the improvement of the extraction process of phenolic compounds from winery by-products. With a focus on the developmental stage of each technology, highlighting the research need and challenges to be overcome for an industrial implementation of these unitary operations in the overall extraction process. A critical comparison of conventional and alternative techniques will be reviewed for ethe pre-treatment of raw material, the diffusion of polyphenols and the purification of these high added value compounds. This review intends to give the reader some key answers (costs, advantages, drawbacks) to help in the choice of alternative technologies for extraction purposes.

Open Source Radiation Hardened by Design Technology

NASA Technical Reports Server (NTRS)

Shuler, Robert

2016-01-01

The proposed technology allows use of the latest microcircuit technology with lowest power and fastest speed, with minimal delay and engineering costs, through new Radiation Hardened by Design (RHBD) techniques that do not require extensive process characterization, technique evaluation and re-design at each Moore's Law generation. The separation of critical node groups is explicitly parameterized so it can be increased as microcircuit technologies shrink. The technology will be open access to radiation tolerant circuit vendors. INNOVATION: This technology would enhance computation intensive applications such as autonomy, robotics, advanced sensor and tracking processes, as well as low power applications such as wireless sensor networks. OUTCOME / RESULTS: 1) Simulation analysis indicates feasibility. 2)Compact voting latch 65 nanometer test chip designed and submitted for fabrication -7/2016. INFUSION FOR SPACE / EARTH: This technology may be used in any digital integrated circuit in which a high level of resistance to Single Event Upsets is desired, and has the greatest benefit outside low earth orbit where cosmic rays are numerous.

Utilization of Innovations and Techniques of Educational Technology in Delivering of Educational Practicum and Its Impact on Increasing Academic Achievement among Pre-Service Teachers

ERIC Educational Resources Information Center

Ibrahim, Hatim G.

2017-01-01

The current study aims to identify the utilization of innovations and techniques of educational technology in teaching of educational practicum and its impact on increasing academic achievement among pre-service teachers. The study sample consisted of (60) pre-service teachers (student teachers) randomly selected from public middle and secondary…

Effect of Web Assisted Education Supported by Six Thinking Hats on Students' Academic Achievement in Science and Technology Classes

ERIC Educational Resources Information Center

Ercan, Orhan; Bilen, Kadir

2014-01-01

Advances in computer technologies and adoption of related methods and techniques in education have developed parallel to each other. This study focuses on the need to utilize more than one teaching method and technique in education rather than focusing on a single teaching method. By using the pre-test post-test and control group semi-experimental…

Large space systems technology electronics: Data and power distribution

NASA Technical Reports Server (NTRS)

Dunbar, W. G.

1980-01-01

The development of hardware technology and manufacturing techniques required to meet space platform and antenna system needs in the 1980s is discussed. Preliminary designs for manned and automatically assembled space power system cables, connectors, and grounding and bonding materials and techniques are reviewed. Connector concepts, grounding design requirements, and bonding requirements are discussed. The problem of particulate debris contamination for large structure spacecraft is addressed.

Marine Forces Reserve: Accelerating Knowledge Flow through Asynchronous Learning Technologies

DTIC Science & Technology

2014-12-19

pedagogic techniques that are infeasible in the classroom, and they suggest that in some respects technologically intermediated learning can be even better...appropriate for this research (Yin, 1994). We employ multiple techniques for data collection in the field. Foremost, through a unique relationship between...initial interpretations are both grounded firmly in the data and meaningful to organization participants. The Researchers’ relationship with the focal

Defence Technology Strategy for the Demands of the 21st Century

DTIC Science & Technology

2006-10-01

understanding of human capability in the CBM role. Ownership of the intellectual property behind algorithms may be sovereign10, but implementation will...synchronisation schemes. · coding schemes. · modulation techniques. · access schemes. · smart spectrum usage . · low probability of intercept. · implementation...modulation techniques; access schemes; smart spectrum usage ; low probability of intercept Spectrum and bandwidth management · cross layer technologies to

Effects of pre-treatment technologies on dark fermentative biohydrogen production: A review.

PubMed

Bundhoo, M A Zumar; Mohee, Romeela; Hassan, M Ali

2015-07-01

Biohydrogen production from dark fermentation of lignocellulosic materials represents a huge potential in terms of renewable energy exploitation. However, the low hydrogen yield is currently hindering its development on industrial scale. This study reviewed various technologies that have been investigated for enhancing dark fermentative biohydrogen production. The pre-treatment technologies can be classified based on their applications as inoculum or substrates pre-treatment or they can be categorised into physical, chemical, physicochemical and biological based on the techniques used. From the different technologies reviewed, heat and acid pre-treatments are the most commonly studied technologies for both substrates and inoculum pre-treatment. Nevertheless, these two technologies need not necessarily be the most suitable since across different studies, a wide array of other emerging techniques as well as combined technologies have yielded positive findings. To date, there exists no perfect technology for either inoculum or substrate pre-treatment. Although the aim of inoculum pre-treatment is to suppress H2-consumers and enrich H2-producers, many sporulating H2-consumers survive the pre-treatment while some non-spore H2-producers are inhibited. Besides, several inoculum pre-treatment techniques are not effective in the long run and repeated pre-treatment may be required for continuous suppression of H2-consumers and sustained biohydrogen production. Furthermore, many technologies employed for substrates pre-treatment may yield inhibitory compounds that can eventually decrease biohydrogen production. Consequently, much research needs to be done to find out the best technology for both substrates and inoculum pre-treatment while also taking into consideration the energetic, economic and technical feasibility of implementing such a process on an industrial scale. Copyright © 2015 Elsevier Ltd. All rights reserved.

Microfluidic-based photocatalytic microreactor for environmental application: a review of fabrication substrates and techniques, and operating parameters.

PubMed

Das, Susmita; Srivastava, Vimal Chandra

2016-06-08

Photochemical technology with microfluidics is emerging as a new platform in environmental science. Microfluidic technology has various advantages, like better mixing and a shorter diffusion distance for the reactants and products; and uniform distribution of light on the photocatalyst. Depending on the material type and related applications, several fabrication techniques have been adopted by various researchers. Microreactors have been prepared by various techniques, such as lithography, etching, mechanical microcutting technology, etc. Lithography can be classified into photolithography, soft lithography and X-ray lithography techniques whereas the etching process is divided into wet etching (chemical etching) and dry etching (plasma etching) techniques. Several substrates, like polymers, such as polydimethyl-siloxane (PDMS), polymethyle-methacrylate (PMMA), hydrogel, etc.; metals, such as stainless steel, titanium foil, etc.; glass, such as silica capillary, glass slide, etc.; and ceramics have been used for microchannel fabrication. During degradation in a microreactor, the degradation efficiency is affected by few important parameters such as flow rate, initial concentration of the target compound, microreactor dimensions, light intensity, photocatalyst structure and catalyst support. The present paper discusses and critically reviews fabrication techniques and substrates used for microchannel fabrication and critical operating parameters for organics, especially dye degradation in the microreactor. The kinetics of degradation has also been discussed.

Information and communication technology in cross-industry glossaries

NASA Astrophysics Data System (ADS)

Pronichev, A. N.; Polyakov, E. V.; Nikitaev, V. G.; Vasilyev, N. P.; Dmitrieva, V. V.; Ulina, I. V.

2017-01-01

Interdisciplinary glossary is proposed to ensure mutual understanding of specialists from various fields of science and technology. Glossary is designed with application of information technologies. The field of information technologies is considered. It is necessary for the understanding and cooperation of specialists in various areas. The technological solutions and applications for multi-disciplinary areas, results of testing of the developed techniques are presented.

Changes in Attitudes toward Craft and Technology during the Last 20 Years

ERIC Educational Resources Information Center

Autio, Ossi

2016-01-01

There has been technology as long as there have been human beings. We can suppose that technology was as indispensable in the past as it is now. However, nowadays, the great speed at which technological changes come and new techniques are introduced is even more evident. Technology is affecting our lives more and more. It has consequences to every…

Calibration, reconstruction, and rendering of cylindrical millimeter-wave image data

NASA Astrophysics Data System (ADS)

Sheen, David M.; Hall, Thomas E.

2011-05-01

Cylindrical millimeter-wave imaging systems and technology have been under development at the Pacific Northwest National Laboratory (PNNL) for several years. This technology has been commercialized, and systems are currently being deployed widely across the United States and internationally. These systems are effective at screening for concealed items of all types; however, new sensor designs, image reconstruction techniques, and image rendering algorithms could potentially improve performance. At PNNL, a number of specific techniques have been developed recently to improve cylindrical imaging methods including wideband techniques, combining data from full 360-degree scans, polarimetric imaging techniques, calibration methods, and 3-D data visualization techniques. Many of these techniques exploit the three-dimensionality of the cylindrical imaging technique by optimizing the depth resolution of the system and using this information to enhance detection. Other techniques, such as polarimetric methods, exploit scattering physics of the millimeter-wave interaction with concealed targets on the body. In this paper, calibration, reconstruction, and three-dimensional rendering techniques will be described that optimize the depth information in these images and the display of the images to the operator.

A methodology for uncertainty quantification in quantitative technology valuation based on expert elicitation

NASA Astrophysics Data System (ADS)

Akram, Muhammad Farooq Bin

The management of technology portfolios is an important element of aerospace system design. New technologies are often applied to new product designs to ensure their competitiveness at the time they are introduced to market. The future performance of yet-to- be designed components is inherently uncertain, necessitating subject matter expert knowledge, statistical methods and financial forecasting. Estimates of the appropriate parameter settings often come from disciplinary experts, who may disagree with each other because of varying experience and background. Due to inherent uncertain nature of expert elicitation in technology valuation process, appropriate uncertainty quantification and propagation is very critical. The uncertainty in defining the impact of an input on performance parameters of a system makes it difficult to use traditional probability theory. Often the available information is not enough to assign the appropriate probability distributions to uncertain inputs. Another problem faced during technology elicitation pertains to technology interactions in a portfolio. When multiple technologies are applied simultaneously on a system, often their cumulative impact is non-linear. Current methods assume that technologies are either incompatible or linearly independent. It is observed that in case of lack of knowledge about the problem, epistemic uncertainty is the most suitable representation of the process. It reduces the number of assumptions during the elicitation process, when experts are forced to assign probability distributions to their opinions without sufficient knowledge. Epistemic uncertainty can be quantified by many techniques. In present research it is proposed that interval analysis and Dempster-Shafer theory of evidence are better suited for quantification of epistemic uncertainty in technology valuation process. Proposed technique seeks to offset some of the problems faced by using deterministic or traditional probabilistic approaches for uncertainty propagation. Non-linear behavior in technology interactions is captured through expert elicitation based technology synergy matrices (TSM). Proposed TSMs increase the fidelity of current technology forecasting methods by including higher order technology interactions. A test case for quantification of epistemic uncertainty on a large scale problem of combined cycle power generation system was selected. A detailed multidisciplinary modeling and simulation environment was adopted for this problem. Results have shown that evidence theory based technique provides more insight on the uncertainties arising from incomplete information or lack of knowledge as compared to deterministic or probability theory methods. Margin analysis was also carried out for both the techniques. A detailed description of TSMs and their usage in conjunction with technology impact matrices and technology compatibility matrices is discussed. Various combination methods are also proposed for higher order interactions, which can be applied according to the expert opinion or historical data. The introduction of technology synergy matrix enabled capturing the higher order technology interactions, and improvement in predicted system performance.

Applications of aerospace technology to petroleum exploration. Volume 1: Efforts and results

NASA Technical Reports Server (NTRS)

Jaffe, L. D.

1976-01-01

The feasibility of applying aerospace techniques to help solve significant problems in petroleum exploration is studied. Through contacts with petroleum industry and petroleum service industry, important petroleum exploration problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified where possible. Topics selected for investigation include: seismic reflection systems; down-hole acoustic techniques; identification of geological analogies; drilling methods; remote geological sensing; and sea floor imaging and mapping. Specific areas of aerospace technology are applied to 21 concepts formulated from the topics of concern.

Precision Agriculture. Reaping the Benefits of Technological Growth. Resources in Technology.

ERIC Educational Resources Information Center

Hadley, Joel F.

1998-01-01

Technological innovations have revolutionized farming. Using precision farming techniques, farmers get an accurate picture of a field's attributes, such as soil properties, yield rates, and crop characteristics through the use of Differential Global Positioning Satellite hardware. (JOW)

EPOC WATER INC. MICROFILTRATION TECHNOLOGY - APPLICATIONS ANALYSIS REPORT

EPA Science Inventory

This document is an evaluation of the performance of the EPOC Water, Inc. Microfiltration Technology and its applicability as a treatment technique for water contaminated with metals. oth the technical aspects arid the economics of this technology were examined. Operational data ...

ARCTIC FOUNDATIONS, INC. FREEZE BARRIER TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

Arctic Foundations, Inc. (AFI), of Anchorage, Alaska has developed a freeze barrier technology designed to prevent the migration of contaminants in groundwater by completely isolating contaminant source areas until appropriate remediation techniques can be applied. With this tech...

Introduction to Raman chemical imaging technology

USDA-ARS?s Scientific Manuscript database

New developments in computer and imaging hardware have significantly advanced Raman spectroscopy and spectral imaging technologies, and have led to the recent emergence of new Raman detection techniques for rapid and online applications. This book chapter presents Raman chemical imaging technology a...

Technology utilization in a non-urban region: Further impact and technique of the technology use studies center (3)

NASA Technical Reports Server (NTRS)

Gold, H. C.; Moore, A. M.; Dodd, B. (Compiler); Dittmar, V. (Compiler)

1972-01-01

The activities of the Technology Utilization Center are reported. Data concerning the searches, and the types of firms requesting information are presented along with the dissemination and assistance by TUSC.

75 FR 66717 - Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-29

... changes in the telecommunications industry, including deregulation and technological developments, have..., mechanical, or other technological collection techniques or other forms of information technology. Comments... information is estimated to average 1 hour per response. Respondents: Business or other for-profit and non...

Challenges and Opportunities of Information Technology in the 90s. Track VII: Managing Applications and Technology.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Seven papers from the 1990 CAUSE Conference Track VII: Managing Applications and Technology are presented. Authors describe how colleges and universities are incorporating emerging technologies into their campus environments: hardware; software; and procedural techniques. Papers and their authors are as follows: "The Iowa Student Information…

If It's Neutral, It's Not Technology

ERIC Educational Resources Information Center

Strate, Lance

2012-01-01

Taking a media ecology perspective, this article argues that technology cannot be neutral, because it is a form of change, and it has an inherent bias based on the properties of its materials and methods. Additionally, the application of a technology is an intrinsic part of the technology itself, as is technique, instructions, software, or…

"Technology: Chance or Choice?"--A Museum Exhibit on the Impact of Technology.

ERIC Educational Resources Information Center

Ucko, David A.

1983-01-01

The Museum of Science and Industry (Chicago) has created a new exhibit, "Technology: Chance or Choice?," which emphasizes the human impact on technology. Development of and techniques used in the exhibit are discussed. The latter include microcomputers placed throughout the exhibit to pose questions about critical issues raised by particular…

Digital Signal Processing Based Biotelemetry Receivers

NASA Technical Reports Server (NTRS)

Singh, Avtar; Hines, John; Somps, Chris

1997-01-01

This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

3D-Printing: an emerging and a revolutionary technology in pharmaceuticals.

PubMed

Singhvi, Gautam; Patil, Shalini; Girdhar, Vishal; Chellappan, Dinesh K; Gupta, Gaurav; Dua, Kamal

2018-06-01

One of the novel and progressive technology employed in pharmaceutical manufacturing, design of medical device and tissue engineering is threedimensional (3D) printing. 3D printing technologies provide great advantages in 3D scaffolds fabrication over traditional methods in the control of pore size, porosity, and interconnectivity. Various techniques of 3Dprinting include powder bed fusion, fused deposition modeling, binder deposition, inkjet printing, photopolymerization and many others which are still evolving. 3Dprinting technique been employed in developing immediate release products, various systems to deliver multiple release modalities etc. 3D printing has opened the door for new generation of customized drug delivery with builtin flexibility for safer and effective therapy. Our minireview provides a quick snapshot on an overview of 3D printing, various techniques employed, applications and its advancements in pharmaceutical sciences.

Adapting radio technology to LED feedback systems

NASA Astrophysics Data System (ADS)

Salsbury, Marc; Ashdown, Ian

2007-09-01

Superheterodyne techniques were originally developed for radio transmission and reception nearly a century ago. In this paper we explore the adaptation of this technology to the problem of simultaneously monitoring the intensities of multiple LED channels with a single photosensor. The use of superheterodyne techniques obviates the need for multiple photosensors filters and tristimulus color filters to monitor the relative intensities of red, green, and blue LEDs. In addition, they alleviate the problems of electrical and optical noise, as well as the influence of ambient illumination on the photosensors. They can also be used to advantage with phosphor-coated white light LEDs in solid state lighting systems. Taking a broader view, the use of such techniques demonstrates the value of looking outside the realm of conventional LED power and control technologies when designing solid state lighting systems.

Construction of dynamic stochastic simulation models using knowledge-based techniques

NASA Technical Reports Server (NTRS)

Williams, M. Douglas; Shiva, Sajjan G.

1990-01-01

Over the past three decades, computer-based simulation models have proven themselves to be cost-effective alternatives to the more structured deterministic methods of systems analysis. During this time, many techniques, tools and languages for constructing computer-based simulation models have been developed. More recently, advances in knowledge-based system technology have led many researchers to note the similarities between knowledge-based programming and simulation technologies and to investigate the potential application of knowledge-based programming techniques to simulation modeling. The integration of conventional simulation techniques with knowledge-based programming techniques is discussed to provide a development environment for constructing knowledge-based simulation models. A comparison of the techniques used in the construction of dynamic stochastic simulation models and those used in the construction of knowledge-based systems provides the requirements for the environment. This leads to the design and implementation of a knowledge-based simulation development environment. These techniques were used in the construction of several knowledge-based simulation models including the Advanced Launch System Model (ALSYM).

[Flexible print circuit technology application in biomedical engineering].

PubMed

Jiang, Lihua; Cao, Yi; Zheng, Xiaolin

2013-06-01

Flexible print circuit (FPC) technology has been widely applied in variety of electric circuits with high precision due to its advantages, such as low-cost, high specific fabrication ability, and good flexibility, etc. Recently, this technology has also been used in biomedical engineering, especially in the development of microfluidic chip and microelectrode array. The high specific fabrication can help making microelectrode and other micro-structure equipment. And good flexibility allows the micro devices based on FPC technique to be easily packaged with other parts. In addition, it also reduces the damage of microelectrodes to the tissue. In this paper, the application of FPC technology in biomedical engineering is introduced. Moreover, the important parameters of FPC technique and the development trend of prosperous applications is also discussed.

A review of rapid prototyping (RP) techniques in the medical and biomedical sector.

PubMed

Webb, P A

2000-01-01

The evolution of rapid prototyping (RP) technology is briefly discussed, and the application of RP technologies to the medical sector is reviewed. Although the use of RP technology has been slow arriving in the medical arena, the potential of the technique is seen to be widespread. Various uses of the technology within surgical planning, prosthesis development and bioengineering are discussed. Some possible drawbacks are noted in some applications, owing to the poor resolution of CT slice data in comparison with that available on RP machines, but overall, the methods are seen to be beneficial in all areas, with one early report suggesting large improvements in measurement and diagnostic accuracy as a result of using RP models.

Technologies for Clinical Diagnosis Using Expired Human Breath Analysis

PubMed Central

Mathew, Thalakkotur Lazar; Pownraj, Prabhahari; Abdulla, Sukhananazerin; Pullithadathil, Biji

2015-01-01

This review elucidates the technologies in the field of exhaled breath analysis. Exhaled breath gas analysis offers an inexpensive, noninvasive and rapid method for detecting a large number of compounds under various conditions for health and disease states. There are various techniques to analyze some exhaled breath gases, including spectrometry, gas chromatography and spectroscopy. This review places emphasis on some of the critical biomarkers present in exhaled human breath, and its related effects. Additionally, various medical monitoring techniques used for breath analysis have been discussed. It also includes the current scenario of breath analysis with nanotechnology-oriented techniques. PMID:26854142

The AXAF technology program: The optical flats tests

NASA Technical Reports Server (NTRS)

Williams, A. C.; Harper, J. D.; Reily, J. C.; Weisskopf, M. C.; Wyman, C. L.; Zombeck, M.

1984-01-01

The results of a technology program aimed at determining the limits of surface polishing for reflecting X-ray telescopes is presented. This program is part of the major task of developing the Advanced X-ray Astrophysical Facility (AXAF). By studying the optical properties of state-of-the-art polished flat surfaces, conclusions were drawn as to the potential capability of AXAF. Surface microtopography of the flats as well as their figure are studied by X-ray, visual, and mechanical techniques. These techniques and their results are described. The employed polishing techniques are more than adequate for the specifications of the AXAF mirrors.

Study plan to identify long term national telecommunications need and priorities applying Delphi techniques (handbook). [technological forecasting - United States of America

NASA Technical Reports Server (NTRS)

1974-01-01

A handbook that explains the basic Delphi methodology and discusses modified Delphi techniques is presented. The selection of communications experts to participate in a study, the construction of questionnaires on potential communications developments, and requisite technology is treated. No two modified Delphi studies were the same, which reflects the flexibility and adaptability of the technique. Each study must be specifically tailored to a particular case, and consists of seeking a consensus of opinion among experts about a particular subject and attendant conditions that may prevail in the future.

[Application of isothermal amplification technology for pathogen detection in parasitic and other diseases].

PubMed

Ting, Li; Kun, Yang

2018-04-16

The in vitro nucleic acid amplification technique based on polymerase chain reaction (PCR) has been successfully applied to scientific researches. In recent years, the emergence of isothermal amplification technology is increasingly applied in the molecular diagnosis and disease detection because of its advantages of constant temperature, high efficiency, short time-consuming, and less reliance on equipment and instruments. The principle, characteristics and application of the partial isothermal amplification technique in the pathogen detection in parasitic and other diseases are reviewed in this paper, and the prospects of the wide development of the technique are also discussed.

Adaptive wall technology for minimization of wall interferences in transonic wind tunnels

NASA Technical Reports Server (NTRS)

Wolf, Stephen W. D.

1988-01-01

Modern experimental techniques to improve free air simulations in transonic wind tunnels by use of adaptive wall technology are reviewed. Considered are the significant advantages of adaptive wall testing techniques with respect to wall interferences, Reynolds number, tunnel drive power, and flow quality. The application of these testing techniques relies on making the test section boundaries adjustable and using a rapid wall adjustment procedure. A historical overview shows how the disjointed development of these testing techniques, since 1938, is closely linked to available computer support. An overview of Adaptive Wall Test Section (AWTS) designs shows a preference for use of relatively simple designs with solid adaptive walls in 2- and 3-D testing. Operational aspects of AWTS's are discussed with regard to production type operation where adaptive wall adjustments need to be quick. Both 2- and 3-D data are presented to illustrate the quality of AWTS data over the transonic speed range. Adaptive wall technology is available for general use in 2-D testing, even in cryogenic wind tunnels. In 3-D testing, more refinement of the adaptive wall testing techniques is required before more widespread use can be planned.

LSSA (Low-cost Silicon Solar Array) project

NASA Technical Reports Server (NTRS)

1976-01-01

Methods are explored for economically generating electrical power to meet future requirements. The Low-Cost Silicon Solar Array Project (LSSA) was established to reduce the price of solar arrays by improving manufacturing technology, adapting mass production techniques, and promoting user acceptance. The new manufacturing technology includes the consideration of new silicon refinement processes, silicon sheet growth techniques, encapsulants, and automated assembly production being developed under contract by industries and universities.

Techniques for evaluating optimum data center operation

DOEpatents

Hamann, Hendrik F.; Rodriguez, Sergio Adolfo Bermudez; Wehle, Hans-Dieter

2017-06-14

Techniques for modeling a data center are provided. In one aspect, a method for determining data center efficiency is provided. The method includes the following steps. Target parameters for the data center are obtained. Technology pre-requisite parameters for the data center are obtained. An optimum data center efficiency is determined given the target parameters for the data center and the technology pre-requisite parameters for the data center.

In vitro fertilization (IVF)

MedlinePlus

IVF; Assisted reproductive technology; ART; Test-tube baby procedure; Infertility - in vitro ... conception. IVF is a form of assisted reproductive technology (ART). This means special medical techniques are used ...

77 FR 45590 - Proposed Information Collection; Comment Request; Hollings Manufacturing Extension Partnership...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-01

... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information... collection techniques or other forms of information technology. Comments submitted in response to this notice... Requirements AGENCY: National Institute of Standards and Technology (NIST), Commerce. ACTION: Notice. SUMMARY...

JPL Robotics Technology Applicable to Agriculture

NASA Technical Reports Server (NTRS)

Udomkesmalee, Suraphol Gabriel; Kyte, L.

2008-01-01

This slide presentation describes several technologies that are developed for robotics that are applicable for agriculture. The technologies discussed are detection of humans to allow safe operations of autonomous vehicles, and vision guided robotic techniques for shoot selection, separation and transfer to growth media,

76 FR 36130 - Agency Information Collection Request. 60-Day Public Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-21

... of automated collection techniques or other forms of information technology to minimize the... within 60-days. Proposed Project: Health Information Technology Research Center (HITRC) User Experience...) adoption and health information exchange (HIE) by establishing the Health Information Technology Extension...

Quantitative imaging of volcanic plumes — Results, needs, and future trends

USGS Publications Warehouse

Platt, Ulrich; Lübcke, Peter; Kuhn, Jonas; Bobrowski, Nicole; Prata, Fred; Burton, Mike; Kern, Christoph

2015-01-01

Recent technology allows two-dimensional “imaging” of trace gas distributions in plumes. In contrast to older, one-dimensional remote sensing techniques, that are only capable of measuring total column densities, the new imaging methods give insight into details of transport and mixing processes as well as chemical transformation within plumes. We give an overview of gas imaging techniques already being applied at volcanoes (SO2cameras, imaging DOAS, FT-IR imaging), present techniques where first field experiments were conducted (LED-LIDAR, tomographic mapping), and describe some techniques where only theoretical studies with application to volcanology exist (e.g. Fabry–Pérot Imaging, Gas Correlation Spectroscopy, bi-static LIDAR). Finally, we discuss current needs and future trends in imaging technology.

Lessons from Trees.

ERIC Educational Resources Information Center

Elrick, Mike

2003-01-01

Traditional techniques and gear are better suited for comfortable extended wilderness trips with high school students than are emerging technologies and techniques based on low-impact camping and petroleum-based clothing, which send students the wrong messages about ecological relatedness and sustainability. Traditional travel techniques and…

Identifying research needs for wheelchair transfers in the built environment.

PubMed

Crytzer, Theresa Marie; Cooper, Rory; Jerome, Genevieve; Koontz, Alicia

2017-02-01

The purpose of this study is to describe the results of focus groups held during the Independent Wheelchair Transfer (IWT) Workgroup. The aims were to facilitate exchange of ideas on (1) the impact of the built environment on the wheelchair transfer process within the community (i.e. moving from wheelchair to and from other surfaces (e.g. furniture, toilet seat, bath bench, car seat) to participate in daily activities), (2) wheelchair users' needs during transfers in the built environment, and (3) future research directions. Live web-based conferencing using Adobe Connect technology (Clarix Technologies, Inc., Pittsford, NY) was utilized to conduct three focus groups composed of experts in the field of assistive technology. Investigators independently reviewed focus group meeting transcripts and used qualitative methods to identify main themes. Thirty-one experts in assistive technology and related fields participated in focus groups. Nine main themes were found including the effect of transfer skills training, space considerations in the built environment, wheelchair configuration, and the interaction between the built environment, user preferences, and transfer techniques. All groups raised issues about the transfer process in areas of the built environment with limited access, the effect of wheelchair users' transfer techniques, and user preferences during transfers. The area of independent transfers is multi-faceted and several factors require consideration when contemplating environmental changes to improve accessibility for wheelchair users. Obvious opportunity exists for research which could lead to advances in transfer technology, environments, and techniques for wheelchair users. Implications for Rehabilitation Tremendous opportunities for research collaborations in the field of assistive technology: To develop new terminology to describe wheelchair transfers. To improve the design of the built environment for wheelchair users. To investigate wheelchair transfer training techniques.

Accelerated construction

DOT National Transportation Integrated Search

2004-01-01

Accelerated Construction Technology Transfer (ACTT) is a strategic process that uses various innovative techniques, strategies, and technologies to minimize actual construction time, while enhancing quality and safety on today's large, complex multip...

78 FR 79390 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-30

... technological collection techniques or other forms of information technology. Comments regarding this... collar or tattoo number; breed; age; sex; color; distinctive marks; vaccination history; and...

Applying Laser Cutting Techniques through Horology for Teaching Effective STEM in Design and Technology

ERIC Educational Resources Information Center

Jones, Lewis C. R.; Tyrer, John R.; Zanker, Nigel P.

2013-01-01

This paper explores the pedagogy underpinning the use of laser manufacturing methods for the teaching of science, technology, engineering and mathematics (STEM) at key stage 3 design and technology. Clock making (horology) has been a popular project in design and technology (D&T) found in many schools, typically it focuses on aesthetical…

76 FR 24032 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-04-29

... phases: First, for planning; second, for early information technology development; and third, for... collected; and (4) the use of automated collection techniques or other forms of information technology to... the Cooperative Agreements to Support Innovative Exchange Information Technology Systems. Level One...

76 FR 35870 - Commission Information Collection Activities (FERC-523); Comment Request; Extension

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-20

..., such as administrative costs and the cost for information technology. Indirect or overhead costs are... other technological collection techniques or other forms of information technology e.g. permitting... Information Collection Activities (FERC-523); Comment Request; Extension AGENCY: Federal Energy Regulatory...

EMERGING TECHNOLOGY REPORT: RECLAMATION OF LEAD FROM SUPERFUND WASTE MATERIAL USING SECONDARY LEAD SMELTERS

EPA Science Inventory

There are over 3,000 sites across the United States contaminated with lead. Techniques to remediate these sites include standard stabilization/disposal technologies, reclamation of lead using secondary lead smelters, soil washing, and biological removal technologies.

Throu...

[Progress of gene editing technologies and prospect in traditional Chinese medicine].

PubMed

Ma, Yan-Yan; Li, Jing-Zhe; Gao, Er-Ning; Qian, Dan; Zhong, Ju-Ying; Liu, Chang-Zhen

2017-01-01

Gene editing is a kind of technologies that makes precise modification to the genome. It can be used to knock out/in and replace the specific DNA fragment, and make accurate gene editing on the genome level. The essence of the technique is the DNA sequence change with use of non homologous end link repair and homologous recombination repair, combined with specific DNA target recognition and endonuclease.This technology has wide range of development prospects and high application value in terms of scientific research, agriculture, medical treatment and other fields. In the field of gene therapy, gene editing technology has achieved cross-time success in cancers such as leukemia, genetic disorders such as hemophilia, thalassemia, multiple muscle nutritional disorders and retrovirus associated infectious diseases such as AIDS and other diseases. The preparation work for new experimental methods and animal models combined with gene editing technology is under rapid development and improvement. Laboratories around the world have also applied gene editing technique in prevention of malaria, organ transplantation, biological pharmaceuticals, agricultural breeding improvement, resurrection of extinct species, and other research areas. This paper summarizes the application and development status of gene editing technique in the above fields, and also preliminarily explores the potential application prospect of the technology in the field of traditional Chinese medicine, and discusses the present controversy and thoughts. Copyright© by the Chinese Pharmaceutical Association.

Cutting More than Metal: Breaking the Development Cycle

NASA Technical Reports Server (NTRS)

Singer, Chris

2014-01-01

New technology is changing the way we do business at NASA. The ability to use these new tools is made possible by a learning culture able to embrace innovation, flexibility, and prudent risk tolerance, while retaining the hard-won lessons learned of other successes and failures. Technologies such as 3-D manufacturing and structured light scanning are re-shaping the entire product life cycle, from design and analysis, through production, verification, logistics and operations. New fabrication techniques, verification techniques, integrated analysis, and models that follow the hardware from initial concept through operation are reducing the cost and time of building space hardware. Using these technologies to be more efficient, reliable and affordable requires we bring them to a level safe for NASA systems, maintain appropriate rigor in testing and acceptance, and transition new technology. Maximizing these technologies also requires cultural acceptance and understanding and balancing rules with creativity. Evolved systems engineering processes at NASA are increasingly more flexible than they have been in the past, enabling the implementation of new techniques and approaches. This paper provides an overview of NASA Marshall Space Flight Center's new approach to development, as well as examples of how that approach has been incorporated into NASA's Space Launch System (SLS) Program, which counts among its key tenants - safety, affordability, and sustainability. One of the 3D technologies that will be discussed in this paper is the design and testing of various rocket engine components.

Applying CLIPS to control of molecular beam epitaxy processing

NASA Technical Reports Server (NTRS)

Rabeau, Arthur A.; Bensaoula, Abdelhak; Jamison, Keith D.; Horton, Charles; Ignatiev, Alex; Glover, John R.

1990-01-01

A key element of U.S. industrial competitiveness in the 1990's will be the exploitation of advanced technologies which involve low-volume, high-profit manufacturing. The demands of such manufacture limit participation to a few major entities in the U.S. and elsewhere, and offset the lower manufacturing costs of other countries which have, for example, captured much of the consumer electronics market. One such technology is thin-film epitaxy, a technology which encompasses several techniques such as Molecular Beam Epitaxy (MBE), Chemical Beam Epitaxy (CBE), and Vapor-Phase Epitaxy (VPE). Molecular Beam Epitaxy (MBE) is a technology for creating a variety of electronic and electro-optical materials. Compared to standard microelectronic production techniques (including gaseous diffusion, ion implantation, and chemical vapor deposition), MBE is much more exact, though much slower. Although newer than the standard technologies, MBE is the technology of choice for fabrication of ultraprecise materials for cutting-edge microelectronic devices and for research into the properties of new materials.

The potential of FBMC over OFDM for the future 5G mobile communication technology

NASA Astrophysics Data System (ADS)

Ibrahim, A. N.; Abdullah, M. F. L.

2017-09-01

Fifth Generation (5G) is the new evolution of mobile communication technology and will be launched soon in many countries. The researchers and designers of mobile communication technology have been facing the increasing demand of the mobile consumers, high data rates and mobility requirements needed by new wireless applications. Most of the countries have started research on 5G mobile communication technology that is predictable to be launched on 2020 in conjunction with the Olympic Games in Tokyo. Filterbank Multicarrier (FBMC) is one of the modulation techniques for the future 5G mobile communication technology. It uses the multicarrier techniques that are immune to fading caused by transmission of more than one path at a time and also immune to intersymbol interference besides able to function effectively compared to Orthogonal Frequency Division Multiplexing (OFDM) which is used in Fourth Generation (4G) mobile communications technology. This paper discusses the performance of FBMC over OFDM based on the previous journals that were investigated by researchers.

Overview of existing cartilage repair technology.

PubMed

McNickle, Allison G; Provencher, Matthew T; Cole, Brian J

2008-12-01

Currently, autologous chondrocyte implantation and osteochondral grafting bridge the gap between palliation of cartilage injury and resurfacing via arthroplasty. Emerging technologies seek to advance first generation techniques and accomplish several goals including predictable outcomes, cost-effective technology, single-stage procedures, and creation of durable repair tissue. The biologic pipeline represents a variety of technologies including synthetics, scaffolds, cell therapy, and cell-infused matrices. Synthetic constructs, an alternative to biologic repair, resurface a focal chondral defect rather than the entire joint surface. Scaffolds are cell-free constructs designed as a biologic "net" to augment marrow stimulation techniques. Minced cartilage technology uses stabilized autologous or allogeneic fragments in 1-stage transplantation. Second and third generation cell-based methods include alternative membranes, chondrocyte seeding, and culturing onto scaffolds. Despite the promising early results of these products, significant technical obstacles remain along with unknown long-term durability. The vast array of developing technologies has exceptional promise and the potential to revolutionize the cartilage treatment algorithm within the next decade.

Scalable graphene production: perspectives and challenges of plasma applications

NASA Astrophysics Data System (ADS)

Levchenko, Igor; Ostrikov, Kostya (Ken); Zheng, Jie; Li, Xingguo; Keidar, Michael; B. K. Teo, Kenneth

2016-05-01

Graphene, a newly discovered and extensively investigated material, has many unique and extraordinary properties which promise major technological advances in fields ranging from electronics to mechanical engineering and food production. Unfortunately, complex techniques and high production costs hinder commonplace applications. Scaling of existing graphene production techniques to the industrial level without compromising its properties is a current challenge. This article focuses on the perspectives and challenges of scalability, equipment, and technological perspectives of the plasma-based techniques which offer many unique possibilities for the synthesis of graphene and graphene-containing products. The plasma-based processes are amenable for scaling and could also be useful to enhance the controllability of the conventional chemical vapour deposition method and some other techniques, and to ensure a good quality of the produced graphene. We examine the unique features of the plasma-enhanced graphene production approaches, including the techniques based on inductively-coupled and arc discharges, in the context of their potential scaling to mass production following the generic scaling approaches applicable to the existing processes and systems. This work analyses a large amount of the recent literature on graphene production by various techniques and summarizes the results in a tabular form to provide a simple and convenient comparison of several available techniques. Our analysis reveals a significant potential of scalability for plasma-based technologies, based on the scaling-related process characteristics. Among other processes, a greater yield of 1 g × h-1 m-2 was reached for the arc discharge technology, whereas the other plasma-based techniques show process yields comparable to the neutral-gas based methods. Selected plasma-based techniques show lower energy consumption than in thermal CVD processes, and the ability to produce graphene flakes of various sizes reaching hundreds of square millimetres, and the thickness varying from a monolayer to 10-20 layers. Additional factors such as electrical voltage and current, not available in thermal CVD processes could potentially lead to better scalability, flexibility and control of the plasma-based processes. Advantages and disadvantages of various systems are also considered.

Scalable graphene production: perspectives and challenges of plasma applications.

PubMed

Levchenko, Igor; Ostrikov, Kostya Ken; Zheng, Jie; Li, Xingguo; Keidar, Michael; B K Teo, Kenneth

2016-05-19

Graphene, a newly discovered and extensively investigated material, has many unique and extraordinary properties which promise major technological advances in fields ranging from electronics to mechanical engineering and food production. Unfortunately, complex techniques and high production costs hinder commonplace applications. Scaling of existing graphene production techniques to the industrial level without compromising its properties is a current challenge. This article focuses on the perspectives and challenges of scalability, equipment, and technological perspectives of the plasma-based techniques which offer many unique possibilities for the synthesis of graphene and graphene-containing products. The plasma-based processes are amenable for scaling and could also be useful to enhance the controllability of the conventional chemical vapour deposition method and some other techniques, and to ensure a good quality of the produced graphene. We examine the unique features of the plasma-enhanced graphene production approaches, including the techniques based on inductively-coupled and arc discharges, in the context of their potential scaling to mass production following the generic scaling approaches applicable to the existing processes and systems. This work analyses a large amount of the recent literature on graphene production by various techniques and summarizes the results in a tabular form to provide a simple and convenient comparison of several available techniques. Our analysis reveals a significant potential of scalability for plasma-based technologies, based on the scaling-related process characteristics. Among other processes, a greater yield of 1 g × h(-1) m(-2) was reached for the arc discharge technology, whereas the other plasma-based techniques show process yields comparable to the neutral-gas based methods. Selected plasma-based techniques show lower energy consumption than in thermal CVD processes, and the ability to produce graphene flakes of various sizes reaching hundreds of square millimetres, and the thickness varying from a monolayer to 10-20 layers. Additional factors such as electrical voltage and current, not available in thermal CVD processes could potentially lead to better scalability, flexibility and control of the plasma-based processes. Advantages and disadvantages of various systems are also considered.

Monitoring the Thickness of Coal-Conversion Slag

NASA Technical Reports Server (NTRS)

Walsh, J. V.

1984-01-01

Technique adapts analogous ocean-floor-mapping technology. Existing ocean floor acoustic technology adapted for real-time monitoring of thickness and viscosity of flowing slag in coal-conversion processing.

DOE Office of Scientific and Technical Information (OSTI.GOV)

D&R International

South Dakota demonstrates its commitment to technology and efficiency through the Weatherization Program. Weatherization uses advanced technologies and techniques to reduce energy costs for low-income families by increasing the energy efficiency of their homes.

Postprocessing techniques for 3D non-linear structures

NASA Technical Reports Server (NTRS)

Gallagher, Richard S.

1987-01-01

How graphics postprocessing techniques are currently used to examine the results of 3-D nonlinear analyses, some new techniques which take advantage of recent technology, and how these results relate to both the finite element model and its geometric parent are reviewed.

Super-sensing technology: industrial applications and future challenges of electrical tomography.

PubMed

Wei, Kent Hsin-Yu; Qiu, Chang-Hua; Primrose, Ken

2016-06-28

Electrical tomography is a relatively new imaging technique that can image the distribution of the passive electrical properties of an object. Since electrical tomography technology was proposed in the 1980s, the technique has evolved rapidly because of its low cost, easy scale-up and non-invasive features. The technique itself can be sensitive to all passive electrical properties, such as conductivity, permittivity and permeability. Hence, it has a huge potential to be applied in many applications. Owing to its ill-posed nature and low image resolution, electrical tomography attracts more attention in industrial fields than biomedical fields. In the past decades, there have been many research developments and industrial implementations of electrical tomography; nevertheless, the awareness of this technology in industrial sectors is still one of the biggest limitations for technology implementation. In this paper, the authors have summarized several representative applications that use electrical tomography. Some of the current tomography research activities will also be discussed. This article is part of the themed issue 'Supersensing through industrial process tomography'. © 2016 The Author(s).

The Future of Pharmaceutical Manufacturing Sciences

PubMed Central

2015-01-01

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial‐scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state‐of‐art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular‐based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot‐melt processing and printing‐based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:3612–3638, 2015 PMID:26280993

The Future of Pharmaceutical Manufacturing Sciences.

PubMed

Rantanen, Jukka; Khinast, Johannes

2015-11-01

The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process modeling techniques are described in detail. Implementation of materials science tools paves the way to molecular-based processing of future DDSs. A snapshot of some of the existing tools is presented. Additionally, general engineering principles are discussed covering process measurement and process control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed. © 2015 The Authors. Journal of Pharmaceutical Sciences published by Wiley Periodicals, Inc. and the American Pharmacists Association.

The post-humanist embryo: genetic manipulation, assisted reproductive technologies and the Principle of Procreative Beneficence.

PubMed

Güell Pelayo, Francisco

2014-01-01

Drawing from Julian Savulescu's argument for the obligation to use technological interventions for the enhancement human life, the Principle of Procreative Beneficence (PPB) states that parents have a moral obligation to use available reproductive technologies, including techniques of genetic manipulation, to create children who have the best chance of enjoying the best possible life. The aim of this study is to analyse the extent to which the possibility of using genetic manipulation to promote specific personality traits and thereby enhance human life is actually supported by current scientific knowledge and to determine whether the techniques employed in embryo selection comply with the PPB. In light of this analysis, the importance of involving the scientific community in the enhancement debate will be made clear. Moreover, when current knowledge of genetic and epigenetic processes and evidence of the risks of assisted reproductive technologies are taken into account, we find sufficient reason - even when guided by the PPB - to abstain from the use of current techniques of genetic manipulation and embryonic selection.

[Custom-fit kinematic alignment in total knee arthroplasty using PSI. The story of ShapeMatch technology].

PubMed

Calliess, T; Ettinger, M; Stukenborg-Colsmann, C; Windhagen, H

2016-04-01

The story of ShapeMatch® custom-fit cutting guides for primary total knee arthroplasty (TKA) is special compared to other available techniques. First, it was the first such patient-specific instrument (PSI) on the market. Second, the underlying philosophy of kinematic alignment is unique compared to other competitors. Finally, it is the only PSI technique that has been withdrawn from the market. The objective of this paper is to summarize the history of the ShapeMatch® technology and to review the current literature regarding clinical evidence for kinematically aligned TKA. In the recent literature, faster rehabilitation, better knee function and higher patient satisfaction are described for kinematically aligned TKA compared to conventional alignment. However, there is also evidence for inaccuracies by using the PSI technology as a possible cause of treatment failures. Due to those problems, this technology was recalled from the market. As an alternative method to achieve kinematic alignment in TKA, manual as well as computer-assisted techniques are currently under development and are discussed here.

Welding and joining: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

A compilation is presented of NASA-developed technology in welding and joining. Topics discussed include welding equipment, techniques in welding, general bonding, joining techniques, and clamps and holding fixtures.

Effect of Computer Animation Technique on Students' Comprehension of the "Solar System and Beyond" Unit in the Science and Technology Course

ERIC Educational Resources Information Center

Aksoy, Gokhan

2013-01-01

The purpose of this study is to determine the effect of computer animation technique on academic achievement of students in the "Solar System and Beyond" unit lecture as part of the Science and Technology course of the seventh grade in primary education. The sample of the study consists of 60 students attending to the 7th grade of primary school…

Thermoplastic composite parts manufacture at Du Pont

NASA Astrophysics Data System (ADS)

Medwin, Steven J.; Coyle, Edward J.

1993-01-01

Low-cost routes to the manufacture of complex shaped composite parts have been defined using metal forming techniques and Du Pont's long discontinuous fiber (LDF) Technology. These manufacturing techniques include roll forming, stretch forming, and press forming. Near equivalence between the static, dynamic, and damage tolerance properties of LDF and continuous fiber composites have been demonstrated. Several examples are cited which demonstrate the potential for this technology to significantly reduce the cost of aerospace components.

Bibliography of Remote Sensing Techniques Used in Wetland Research

DTIC Science & Technology

1993-01-01

8217 is investigating the application of remote sensing technology for detecting changes in wetland environments. This report documents a bibliographic...search conducted as part of that work unit on applications of remote sensing techniques in wetland research. Results were used to guide research...efforts on the use of remote sensing technology for wetland change detection and assessment. The citations are presented in three appendixes, organized by wetland type, sensor type, and author.

Bibliography of Remote Sensing Techniques Used in Wetland Research.

DTIC Science & Technology

1993-01-01

remote sensing technology for detecting changes in wetland environments. This report documents a bibliographic search conducted as part of that work unit on applications of remote sensing techniques in wetland research. Results were used to guide research efforts on the use of remote sensing technology for wetland change detection and assessment. The citations are presented in three appendixes, organized by wetland type, sensor type, and author.... Change detection, Wetland assessment, Remote sensing ,

Waste Printed Circuit Board (PCB) Recycling Techniques.

PubMed

Ning, Chao; Lin, Carol Sze Ki; Hui, David Chi Wai; McKay, Gordon

2017-04-01

With the development of technologies and the change of consumer attitudes, the amount of waste electrical and electronic equipment (WEEE) is increasing annually. As the core part of WEEE, the waste printed circuit board (WPCB) is a dangerous waste but at the same time a rich resource for various kinds of materials. In this work, various WPCB treatment methods as well as WPCB recycling techniques divided into direct treatment (landfill and incineration), primitive recycling technology (pyrometallurgy, hydrometallurgy, biometallurgy and primitive full recovery of NMF-non metallic fraction), and advanced recycling technology (mechanical separation, direct use and modification of NMF) are reviewed and analyzed based on their advantages and disadvantages. Also, the evaluation criteria are discussed including economic, environmental, and gate-to-market ability. This review indicates the future research direction of WPCB recycling should focus on a combination of several techniques or in series recycling to maximize the benefits of process.

Phage display—A powerful technique for immunotherapy

PubMed Central

Bazan, Justyna; Całkosiński, Ireneusz; Gamian, Andrzej

2012-01-01

One of the most effective molecular diversity techniques is phage display. This technology is based on a direct linkage between phage phenotype and its encapsulated genotype, which leads to presentation of molecule libraries on the phage surface. Phage display is utilized in studying protein-ligand interactions, receptor binding sites and in improving or modifying the affinity of proteins for their binding partners. Generating monoclonal antibodies and improving their affinity, cloning antibodies from unstable hybridoma cells and identifying epitopes, mimotopes and functional or accessible sites from antigens are also important advantages of this technology. Techniques originating from phage display have been applied to transfusion medicine, neurological disorders, mapping vascular addresses and tissue homing of peptides. Phages have been applicable to immunization therapies, which may lead to development of new tools used for treating autoimmune and cancer diseases. This review describes the phage display technology and presents the recent advancements in therapeutic applications of phage display. PMID:22906939

Technological advances in perioperative monitoring: Current concepts and clinical perspectives

PubMed Central

Chilkoti, Geetanjali; Wadhwa, Rachna; Saxena, Ashok Kumar

2015-01-01

Minimal mandatory monitoring in the perioperative period recommended by Association of Anesthetists of Great Britain and Ireland and American Society of Anesthesiologists are universally acknowledged and has become an integral part of the anesthesia practice. The technologies in perioperative monitoring have advanced, and the availability and clinical applications have multiplied exponentially. Newer monitoring techniques include depth of anesthesia monitoring, goal-directed fluid therapy, transesophageal echocardiography, advanced neurological monitoring, improved alarm system and technological advancement in objective pain assessment. Various factors that need to be considered with the use of improved monitoring techniques are their validation data, patient outcome, safety profile, cost-effectiveness, awareness of the possible adverse events, knowledge of technical principle and ability of the convenient routine handling. In this review, we will discuss the new monitoring techniques in anesthesia, their advantages, deficiencies, limitations, their comparison to the conventional methods and their effect on patient outcome, if any. PMID:25788767

Technological advances in perioperative monitoring: Current concepts and clinical perspectives.

PubMed

Chilkoti, Geetanjali; Wadhwa, Rachna; Saxena, Ashok Kumar

2015-01-01

Minimal mandatory monitoring in the perioperative period recommended by Association of Anesthetists of Great Britain and Ireland and American Society of Anesthesiologists are universally acknowledged and has become an integral part of the anesthesia practice. The technologies in perioperative monitoring have advanced, and the availability and clinical applications have multiplied exponentially. Newer monitoring techniques include depth of anesthesia monitoring, goal-directed fluid therapy, transesophageal echocardiography, advanced neurological monitoring, improved alarm system and technological advancement in objective pain assessment. Various factors that need to be considered with the use of improved monitoring techniques are their validation data, patient outcome, safety profile, cost-effectiveness, awareness of the possible adverse events, knowledge of technical principle and ability of the convenient routine handling. In this review, we will discuss the new monitoring techniques in anesthesia, their advantages, deficiencies, limitations, their comparison to the conventional methods and their effect on patient outcome, if any.

A random approach of test macro generation for early detection of hotspots

NASA Astrophysics Data System (ADS)

Lee, Jong-hyun; Kim, Chin; Kang, Minsoo; Hwang, Sungwook; Yang, Jae-seok; Harb, Mohammed; Al-Imam, Mohamed; Madkour, Kareem; ElManhawy, Wael; Kwan, Joe

2016-03-01

Multiple-Patterning Technology (MPT) is still the preferred choice over EUV for the advanced technology nodes, starting the 20nm node. Down the way to 7nm and 5nm nodes, Self-Aligned Multiple Patterning (SAMP) appears to be one of the effective multiple patterning techniques in terms of achieving small pitch of printed lines on wafer, yet its yield is in question. Predicting and enhancing the yield in the early stages of technology development are some of the main objectives for creating test macros on test masks. While conventional yield ramp techniques for a new technology node have relied on using designs from previous technology nodes as a starting point to identify patterns for Design of Experiment (DoE) creation, these techniques are challenging to apply in the case of introducing an MPT technique like SAMP that did not exist in previous nodes. This paper presents a new strategy for generating test structures based on random placement of unit patterns that can construct more meaningful bigger patterns. Specifications governing the relationships between those unit patterns can be adjusted to generate layout clips that look like realistic SAMP designs. A via chain can be constructed to connect the random DoE of SAMP structures through a routing layer to external pads for electrical measurement. These clips are decomposed according to the decomposition rules of the technology into the appropriate mandrel and cut masks. The decomposed clips can be tested through simulations, or electrically on silicon to discover hotspots. The hotspots can be used in optimizing the fabrication process and models to fix them. They can also be used as learning patterns for DFM deck development. By expanding the size of the randomly generated test structures, more hotspots can be detected. This should provide a faster way to enhance the yield of a new technology node.

[Surgical treatment of anal fistula].

PubMed

Zeng, Xiandong; Zhang, Yong

2014-12-01

Anal fistula is a common disease. It is also quite difficult to be solved without recurrence or damage to the anal sphincter. Several techniques have been described for the management of anal fistula, but there is no final conclusion of their application in the treatment. This article summarizes the history of anal fistula management, the current techniques available, and describes new technologies. Internet online searches were performed from the CNKI and Wanfang databases to identify articles about anal fistula management including seton, fistulotomy, fistulectomy, LIFT operation, biomaterial treatment and new technology application. Every fistula surgery technique has its own place, so it is reasonable to give comprehensive individualized treatment to different patients, which may lead to reduced recurrence and avoidance of damage to the anal sphincter. New technologies provide promising alternatives to traditional methods of management. Surgeons still need to focus on the invention and improvement of the minimally invasive techniques. Besides, a new therapeutic idea is worth to explore that the focus of surgical treatment should be transferred to prevention of the formation of anal fistula after perianal abscess.

Optical imaging of architecture and function in the living brain sheds new light on cortical mechanisms underlying visual perception.

PubMed

Grinvald, A

1992-01-01

Long standing questions related to brain mechanisms underlying perception can finally be resolved by direct visualization of the architecture and function of mammalian cortex. This advance has been accomplished with the aid of two optical imaging techniques with which one can literally see how the brain functions. The upbringing of this technology required a multi-disciplinary approach integrating brain research with organic chemistry, spectroscopy, biophysics, computer sciences, optics and image processing. Beyond the technological ramifications, recent research shed new light on cortical mechanisms underlying sensory perception. Clinical applications of this technology for precise mapping of the cortical surface of patients during neurosurgery have begun. Below is a brief summary of our own research and a description of the technical specifications of the two optical imaging techniques. Like every technique, optical imaging also suffers from severe limitations. Here we mostly emphasize some of its advantages relative to all alternative imaging techniques currently in use. The limitations are critically discussed in our recent reviews. For a series of other reviews, see Cohen (1989).

Formation, Physicochemical Characterization, and Thermodynamic Stability of the Amorphous State of Drugs and Excipients.

PubMed

Martino, Piera Di; Magnoni, Federico; Peregrina, Dolores Vargas; Gigliobianco, Maria Rosa; Censi, Roberta; Malaj, Ledjan

2016-01-01

Drugs and excipients used for pharmaceutical applications generally exist in the solid (crystalline or amorphous) state, more rarely as liquid materials. In some cases, according to the physicochemical nature of the molecule, or as a consequence of specific technological processes, a compound may exist exclusively in the amorphous state. In other cases, as a consequence of specific treatments (freezing and spray drying, melting and co-melting, grinding and compression), the crystalline form may convert into a completely or partially amorphous form. An amorphous material shows physical and thermodynamic properties different from the corresponding crystalline form, with profound repercussions on its technological performance and biopharmaceutical properties. Several physicochemical techniques such as X-ray powder diffraction, thermal methods of analysis, spectroscopic techniques, gravimetric techniques, and inverse gas chromatography can be applied to characterize the amorphous form of a compound (drug or excipient), and to evaluate its thermodynamic stability. This review offers a survey of the technologies used to convert a crystalline solid into an amorphous form, and describes the most important techniques for characterizing the amorphous state of compounds of pharmaceutical interest.

Correlation of the CT Compatible Stereotaxic Craniotomy with MRI Scans of the Patients for Removing Cranial Lesions Located Eloquent Areas and Deep Sites of Brain.

PubMed

Gulsen, Salih

2015-03-15

The first goal in neurosurgery is to protect neural function as long as it is possible. Moreover, while protecting the neural function, a neurosurgeon should extract the maximum amount of tumoral tissue from the tumour region of the brain. So neurosurgery and technological advancement go hand in hand to realize this goal. Using of CT compatible stereotaxy for removing a cranial tumour is to be commended as a cornerstone of these technological advancements. Following CT compatible stereotaxic system applications in neurosurgery, different techniques have taken place in neurosurgical practice. These techniques are magnetic resonance imaging (MRI), MRI compatible stereotaxis, frameless stereotaxy, volumetric stereotaxy, functional MRI, diffusion tensor (DT) imaging techniques (tractography of the white matter), intraoperative MRI and neuronavigation systems. However, to use all of this equipment having these technologies would be impossible because of economic reasons. However, when we correlated this technique with MRI scans of the patients with CT compatible stereotaxy scans, it is possible to provide gross total resection and protect and improve patients' neural functions.

Summary report of the Lightning and Static Electricity Committee

NASA Technical Reports Server (NTRS)

Plumer, J. A.

1979-01-01

Lightning protection technology as applied to aviation and identifying these technology needs are presented. The flight areas of technical needs include; (1) the need for In-Flight data on lightning electrical parameters; (2) technology base and guidelines for protection of advanced systems and structures; (3) improved laboratory test techniques; (4) analysis techniques for predicting induced effects; (5) lightning strike incident data from General Aviation; (6) lightning detection systems; (7) obtain pilot reports of lightning strikes; and (8) better training in lightning awareness. The nature of each problem, timeliness, impact of solutions, degree of effort required, and the roles of government and industry in achieving solutions are discussed.

Characterization of hydrogel printer for direct cell-laden scaffolds

NASA Astrophysics Data System (ADS)

Whulanza, Yudan; Arsyan, Rendria; Saragih, Agung Shamsuddin

2018-02-01

The additive manufacturing technology has been massively developed since the last decade. The technology was previously known as rapid prototyping techniques that aimed to produce a prototyping product in fast and economical way. Currently, this technique is also applied to fabricate microstructure utilized in tissue engineering technology. Here, we introduce a 3D printer which using hydrogel gelatin to realize cell laden scaffold with dimension around 50-100 µm. However, in order to fabricate such a precise dimension, an optimum working parameters are required to control the physical properties of gelatin. At the end of our study, we formulated the best parameters to perform the product as we desired.

Multiwire Gamma Camera for Radionuclide and Radiographic Imaging in the Space environment

NASA Technical Reports Server (NTRS)

Lacy, Jeffrey L.

1985-01-01

Unique multiwire proportional counter technology has been developed at the Johnson Space Center over the past several years. The technology will be described and how it may apply both in near- and long-term NASA efforts. In the near-term, I feel that the technology will provide a significant tool for the cardiovascular research area. In particular, low-dose nuclear medicine and tissue densitometry techniques of expanded scope will be supplied. In the longer term, the multiwire technique can provide a general purpose radiology and nuclear medicine facility for use in the space station which would be difficult and costly to provide by other means.

Development and Current Status of Skull-Image Superimposition - Methodology and Instrumentation.

PubMed

Lan, Y

1992-12-01

This article presents a review of the literature and an evaluation on the development and application of skull-image superimposition technology - both instrumentation and methodology - contributed by a number of scholars since 1935. Along with a comparison of the methodologies involved in the two superimposition techniques - photographic and video - the author characterized the techniques in action and the recent advances in computer image superimposition processing technology. The major disadvantage of conventional approaches is its relying on subjective interpretation. Through painstaking comparison and analysis, computer image processing technology can make more conclusive identifications by direct testing and evaluating the various programmed indices. Copyright © 1992 Central Police University.

75 FR 4337 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-27

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... land exchange. The Agreement to Initiate contains information such as the description of properties...

76 FR 4095 - Notice of Submission for OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-24

..., mechanical, or other technological collection techniques or other forms of information technology. Dated... financial and economic literacy to participants. This information collection is being submitted under the...

77 FR 18202 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-27

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... the EBT environment. Description of Respondents: State, Local, or Tribal Government; Business or other...

Biodegradable Polymers and Stem Cells for Bioprinting.

PubMed

Lei, Meijuan; Wang, Xiaohong

2016-04-29

It is imperative to develop organ manufacturing technologies based on the high organ failure mortality and serious donor shortage problems. As an emerging and promising technology, bioprinting has attracted more and more attention with its super precision, easy reproduction, fast manipulation and advantages in many hot research areas, such as tissue engineering, organ manufacturing, and drug screening. Basically, bioprinting technology consists of inkjet bioprinting, laser-based bioprinting and extrusion-based bioprinting techniques. Biodegradable polymers and stem cells are common printing inks. In the printed constructs, biodegradable polymers are usually used as support scaffolds, while stem cells can be engaged to differentiate into different cell/tissue types. The integration of biodegradable polymers and stem cells with the bioprinting techniques has provided huge opportunities for modern science and technologies, including tissue repair, organ transplantation and energy metabolism.

Industrial benefits and future expectations in materials and processes resulting from space technology

NASA Technical Reports Server (NTRS)

Meyer, J. D.

1977-01-01

Space technology transfer is discussed as applied to the field of materials science. Advances made in processing include improved computer techniques, and structural analysis. Technology transfer is shown to have an important impact potential in the overall productivity of the United States.

Better Particle Accelerators with SRF Technology

ScienceCinema

Padamsee, Hasan; Martinello, Martina; Ross, Marc; Peskin, Michael; Yamamoto, Akira

2018-01-16

The use of superconducting radio frequency (SRF) technology is a driving force in the development of particle accelerators. Scientists from around the globe are working together to develop the newest materials and techniques to improve the quality and efficiency of the SRF cavities that are essential for this technology.

Better Particle Accelerators with SRF Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Padamsee, Hasan; Martinello, Martina; Ross, Marc

2017-02-20

The use of superconducting radio frequency (SRF) technology is a driving force in the development of particle accelerators. Scientists from around the globe are working together to develop the newest materials and techniques to improve the quality and efficiency of the SRF cavities that are essential for this technology.

77 FR 49831 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Green...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-17

... technologies and practices, the second component of the BLS Green Jobs definition. This information collection... other technological collection techniques or other forms of information technology, e.g., permitting... DEPARTMENT OF LABOR Office of the Secretary Agency Information Collection Activities; Submission...

76 FR 2689 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-14

... of automated collection techniques or other forms of information technology to minimize the...; Title of Information Collection: Recognition of Payment for New Technology Ambulatory Payment... for New Technology APC payment. We are making no changes to the information that we collect. The...

Indigenous knowledges driving technological innovation

Treesearch

Lilian Alessa; Carlos Andrade; Phil Cash Cash; Christian P. Giardina; Matt Hamabata; Craig Hammer; Kai Henifin; Lee Joachim; Jay T. Johnson; Kekuhi Kealiikanakaoleohaililani; Deanna Kingston; Andrew Kliskey; Renee Pualani Louis; Amanda Lynch; Daryn McKenny; Chels Marshall; Mere Roberts; Taupouri Tangaro; Jyl Wheaton-Abraham; Everett Wingert

2011-01-01

This policy brief explores the use and expands the conversation on the ability of geospatial technologies to represent Indigenous cultural knowledge. Indigenous peoples' use of geospatial technologies has already proven to be a critical step for protecting tribal self-determination. However, the ontological frameworks and techniques of Western geospatial...

78 FR 34154 - Reports, Forms, and Record Keeping Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-06

..., mechanical, or other technological collection techniques or other forms of information technology, e.g... would be compared. The survey would be conducted primarily on-line, with the on-line technology serving... data applicable to these tasks, they do not tell the entire story. Attitudes, perceptions, knowledge...

78 FR 32417 - Intent To Request Renewal From OMB of One Current Public Collection of Information...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Officer, Office of Information Technology (OIT), TSA-11, Transportation Security Administration, 601 South... technological collection techniques or other forms of information technology. Information Collection Requirement... provide fingerprints and undergo a criminal history records check. The program implements authorities set...

Automated Predictive Big Data Analytics Using Ontology Based Semantics.

PubMed

Nural, Mustafa V; Cotterell, Michael E; Peng, Hao; Xie, Rui; Ma, Ping; Miller, John A

2015-10-01

Predictive analytics in the big data era is taking on an ever increasingly important role. Issues related to choice on modeling technique, estimation procedure (or algorithm) and efficient execution can present significant challenges. For example, selection of appropriate and optimal models for big data analytics often requires careful investigation and considerable expertise which might not always be readily available. In this paper, we propose to use semantic technology to assist data analysts and data scientists in selecting appropriate modeling techniques and building specific models as well as the rationale for the techniques and models selected. To formally describe the modeling techniques, models and results, we developed the Analytics Ontology that supports inferencing for semi-automated model selection. The SCALATION framework, which currently supports over thirty modeling techniques for predictive big data analytics is used as a testbed for evaluating the use of semantic technology.

Automated Predictive Big Data Analytics Using Ontology Based Semantics

PubMed Central

Nural, Mustafa V.; Cotterell, Michael E.; Peng, Hao; Xie, Rui; Ma, Ping; Miller, John A.

2017-01-01

Predictive analytics in the big data era is taking on an ever increasingly important role. Issues related to choice on modeling technique, estimation procedure (or algorithm) and efficient execution can present significant challenges. For example, selection of appropriate and optimal models for big data analytics often requires careful investigation and considerable expertise which might not always be readily available. In this paper, we propose to use semantic technology to assist data analysts and data scientists in selecting appropriate modeling techniques and building specific models as well as the rationale for the techniques and models selected. To formally describe the modeling techniques, models and results, we developed the Analytics Ontology that supports inferencing for semi-automated model selection. The SCALATION framework, which currently supports over thirty modeling techniques for predictive big data analytics is used as a testbed for evaluating the use of semantic technology. PMID:29657954

Concepts and techniques for ultrasonic evaluation of material mechanical properties

NASA Technical Reports Server (NTRS)

Vary, A.

1980-01-01

Ultrasonic methods that can be used for material strength are reviewed. Emergency technology involving advanced ultrasonic techniques and associated measurements is described. It is shown that ultrasonic NDE is particularly useful in this area because it involves mechanical elastic waves that are strongly modulated by morphological factors that govern mechanical strength and also dynamic failure modes. These aspects of ultrasonic NDE are described in conjunction with advanced approaches and theoretical concepts for signal acquisition and analysis for materials characterization. It is emphasized that the technology is in its infancy and that much effort is still required before the techniques and concepts can be transferred from laboratory to field conditions.

Advanced imaging techniques II: using a compound microscope for photographing point-mount specimens

USDA-ARS?s Scientific Manuscript database

Digital imaging technology has revolutionized the practice photographing insects for scientific study. Herein described are lighting and mounting techniques designed for imaging micro Hymenoptera. Techniques described here are applicable to all small insects, as well as other invertebrates. The ke...

Additive Manufacturing Infrared Inspection

NASA Technical Reports Server (NTRS)

Gaddy, Darrell

2014-01-01

Additive manufacturing is a rapid prototyping technology that allows parts to be built in a series of thin layers from plastic, ceramics, and metallics. Metallic additive manufacturing is an emerging form of rapid prototyping that allows complex structures to be built using various metallic powders. Significant time and cost savings have also been observed using the metallic additive manufacturing compared with traditional techniques. Development of the metallic additive manufacturing technology has advanced significantly over the last decade, although many of the techniques to inspect parts made from these processes have not advanced significantly or have limitations. Several external geometry inspection techniques exist such as Coordinate Measurement Machines (CMM), Laser Scanners, Structured Light Scanning Systems, or even traditional calipers and gages. All of the aforementioned techniques are limited to external geometry and contours or must use a contact probe to inspect limited internal dimensions. This presentation will document the development of a process for real-time dimensional inspection technique and digital quality record of the additive manufacturing process using Infrared camera imaging and processing techniques.

77 FR 62212 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-12

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... creditworthiness for RHS loans and grants. It can be used to document an [[Page 62213

78 FR 74101 - [Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... owner's property, and a certification statement that the trees removed from the owner's property were...

77 FR 4547 - Notice of Submission for OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-30

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... Payments for Federal Property. Local Educational Agencies that have lost taxable property due to Federal...

Capacitor Technologies, Applications and Reliability

NASA Technical Reports Server (NTRS)

1981-01-01

Various aspects of capacitor technologies and applications are discussed. Major emphasis is placed on: the causes of failures; accelerated testing; screening tests; destructive physical analysis; applications techniques; and improvements in capacitor capabilities.

75 FR 8294 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... technological collection techniques or other forms of information technology should be addressed to: Desk... to reorganize the farming operation or refinance USDA and non-USDA creditors. The information...

76 FR 1597 - Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-11

... technological collection techniques or other forms of information technology. Comments may be sent to: Michele L... of the nation's evolution to digital television, the Federal Communications Commission had ordered...

78 FR 78329 - Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... technological collection techniques or other forms of information technology. Comments may be sent to: Michele L... economy without endangering the environment. RUS provides financial and technical assistance to help...

Simple Assessment Techniques for Soil and Water. Environmental Factors in Small Scale Development Projects. Workshops.

ERIC Educational Resources Information Center

Coordination in Development, New York, NY.

This booklet was produced in response to the growing need for reliable environmental assessment techniques that can be applied to small-scale development projects. The suggested techniques emphasize low-technology environmental analysis. Although these techniques may lack precision, they can be extremely valuable in helping to assure the success…

Addressing Theory and Performance Enhancements for the Independent Sustain and Address AC Plasma Display

NASA Astrophysics Data System (ADS)

Warren, Kevin Wilson

The Independent Sustain and Address (ISA) AC plasma panel is a flat, flicker-free, gas discharge type of display device. This display technology promises to reduce both the cost of manufacturing and operation of AC plasma displays. The ISA technology uses a vastly different mechanism to change the state of the display pixels than the standard AC plasma technology. This addressing mechanism is an exploitation of some of the natural characteristics associated with the plasma that can form during strong gas discharges. This thesis presents detailed data from experiments that were designed to evaluate and test the effectiveness of this mechanism. Through these experiments, the theory that the addressing methodology is based upon is developed and evaluated. These experiments show that the address margin windows for this technology are very large, minimally two to three times larger than the address margins for the standard XY AC plasma addressing techniques. New capabilities are also described, such as global brightness control for the ISA technology and a technique for increasing the addressing rate. These advances were designed into working prototypes and transferred to industry where there are currently commercial products available based upon these advances. A technique for implementing gray scale using some of these advances is also proposed.

Evolution and revolution: gauging the impact of technological and technical innovation on Olympic performance.

PubMed

Balmer, Nigel; Pleasence, Pascoe; Nevill, Alan

2012-01-01

A number of studies have pointed to a plateauing of athletic performance, with the suggestion that further improvements will need to be driven by revolutions in technology or technique. In the present study, we examine post-war men's Olympic performance in jumping events (pole vault, long jump, high jump, triple jump) to determine whether performance has indeed plateaued and to present techniques, derived from models of human growth, for assessing the impact of technological and technical innovation over time (logistic and double logistic models of growth). Significantly, two of the events involve well-documented changes in technology (pole material in pole vault) or technique (the Fosbury Flop in high jump), while the other two do not. We find that in all four cases, performance appears to have plateaued and that no further "general" improvement should be expected. In the case of high jump, the double logistic model provides a convenient method for modelling and quantifying a performance intervention (in this case the Fosbury Flop). However, some shortcomings are revealed for pole vault, where evolutionary post-war improvements and innovation (fibre glass poles) were concurrent, preventing their separate identification in the model. In all four events, it is argued that further general growth in performance will indeed need to rely predominantly on technological or technical innovation.

Information Protection Engineering: Using Technology and Experience to Protect Assets

DTIC Science & Technology

2001-07-01

SAIC’s highly experienced team has developed technology, techniques and expertise in protecting these information assets from electronic attack by...criminals, terrorists, hackers or nation states. INFORMATION PROTECTION ENGINEERING : Using Technology and Experience to Protect Assets William J. Marlow... Engineering : Using Technology and Experience to Protect Assets Contract or Grant Number Program Element Number Authors Marlow, William J. Project

Multiple access techniques and spectrum utilization of the GLOBALSTAR mobile satellite system

NASA Astrophysics Data System (ADS)

Louie, Ming; Cohen, Michel; Rouffet, Denis; Gilhousen, Klein S.

The GLOBALSTAR System is a Low Earth Orbit (LEO) satellite-based mobile communications system that is interoperable with the current and future Public Land Mobile Network (PLMN). The GLOBALSTAR System concept is based upon technological advancement in two key areas: (1) the advancement in LEO satellite technology; (2) the advancement in cellular telephone technology, including the commercial applications of Code Division Multiple Access (CDMA) technologies, and of the most recent progress in Time Division Multiple Access technologies. The GLOBALSTAR System uses elements of CDMA, Frequency Division Multiple Access (FDMA), and Time Division Multiple Access (TDMA) technology, combining with satellite Multiple Beam Antenna (MBA) technology, to arrive at one of the most efficient modulation and multiple access system ever proposed for a satellite communications system. The technology used in GLOBALSTAR exploits the following techniques in obtaining high spectral efficiency and affordable cost per channel, with minimum coordination among different systems: power control, in open and closed loops, voice activation, spot beam satellite antenna for frequency reuse, weighted satellite antenna gain, multiple satellite coverage, and handoff between satellites. The GLOBALSTAR system design will use the following frequency bands: 1610-1626.5 MHz for up-link and 2483.5-2500 MHz for down-link.

Disruptive technology for vector control: the Innovative Vector Control Consortium and the US Military join forces to explore transformative insecticide application technology for mosquito control programmes.

PubMed

Knapp, Jennifer; Macdonald, Michael; Malone, David; Hamon, Nicholas; Richardson, Jason H

2015-09-26

Malaria vector control technology has remained largely static for decades and there is a pressing need for innovative control tools and methodology to radically improve the quality and efficiency of current vector control practices. This report summarizes a workshop jointly organized by the Innovative Vector Control Consortium (IVCC) and the Armed Forces Pest Management Board (AFPMB) focused on public health pesticide application technology. Three main topics were discussed: the limitations with current tools and techniques used for indoor residual spraying (IRS), technology innovation to improve efficacy of IRS programmes, and truly disruptive application technology beyond IRS. The group identified several opportunities to improve application technology to include: insuring all IRS programmes are using constant flow valves and erosion resistant tips; introducing compression sprayer improvements that help minimize pesticide waste and human error; and moving beyond IRS by embracing the potential for new larval source management techniques and next generation technology such as unmanned "smart" spray systems. The meeting served to lay the foundation for broader collaboration between the IVCC and AFPMB and partners in industry, the World Health Organization, the Bill and Melinda Gates Foundation and others.

Wire blade development for Fixed Abrasive Slicing Technique (FAST) slicing

NASA Technical Reports Server (NTRS)

Khattak, C. P.; Schmid, F.; Smith, M. B.

1982-01-01

A low cost, effective slicing method is essential to make ingot technology viable for photovoltaics in terrestrial applications. The fixed abrasive slicing technique (FAST) combines the advantages of the three commercially developed techniques. In its development stage FAST demonstrated cutting effectiveness of 10 cm and 15 cm diameter workpieces. Wire blade development is still the critical element for commercialization of FAST technology. Both impregnated and electroplated wire blades have been developed; techniques have been developed to fix diamonds only in the cutting edge of the wire. Electroplated wires show the most near term promise and this approach is emphasized. With plated wires it has been possible to control the size and shape of the electroplating, it is expected that this feature reduces kerf and prolongs the life of the wirepack.

Plasmonic biosensors.

PubMed

Hill, Ryan T

2015-01-01

The unique optical properties of plasmon resonant nanostructures enable exploration of nanoscale environments using relatively simple optical characterization techniques. For this reason, the field of plasmonics continues to garner the attention of the biosensing community. Biosensors based on propagating surface plasmon resonances (SPRs) in films are the most well-recognized plasmonic biosensors, but there is great potential for the new, developing technologies to surpass the robustness and popularity of film-based SPR sensing. This review surveys the current plasmonic biosensor landscape with emphasis on the basic operating principles of each plasmonic sensing technique and the practical considerations when developing a sensing platform with the various techniques. The 'gold standard' film SPR technique is reviewed briefly, but special emphasis is devoted to the up-and-coming localized surface plasmon resonance and plasmonically coupled sensor technology. © 2014 Wiley Periodicals, Inc.