NASA Space Technology Roadmaps and Priorities: Restoring NASA's Technological Edge and Paving the Way for a New Era in Space

NASA Technical Reports Server (NTRS)

2012-01-01

Success in executing future NASA space missions will depend on advanced technology developments that should already be underway. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development, and NASA's technology base is largely depleted. As noted in a recent National Research Council report on the U.S. civil space program: Future U.S. leadership in space requires a foundation of sustained technology advances that can enable the development of more capable, reliable, and lower-cost spacecraft and launch vehicles to achieve space program goals. A strong advanced technology development foundation is needed also to enhance technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management. Yet financial support for this technology base has eroded over the years. The United States is now living on the innovation funded in the past and has an obligation to replenish this foundational element. NASA has developed a draft set of technology roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist. The NRC appointed the Steering Committee for NASA Technology Roadmaps and six panels to evaluate the draft roadmaps, recommend improvements, and prioritize the technologies within each and among all of the technology areas as NASA finalizes the roadmaps. The steering committee is encouraged by the initiative NASA has taken through the Office of the Chief Technologist (OCT) to develop technology roadmaps and to seek input from the aerospace technical community with this study.

Technology Development for NASA Mars Missions

NASA Technical Reports Server (NTRS)

Hayati, Samad

2005-01-01

A viewgraph presentation on technology development for NASA Mars Missions is shown. The topics include: 1) Mars mission roadmaps; 2) Focus and Base Technology programs; 3) Technology Infusion; and 4) Feed Forward to Future Missions.

Platform based design of EAP transducers in Danfoss PolyPower A/S

NASA Astrophysics Data System (ADS)

Sarban, Rahimullah; Gudlaugsson, Tómas V.

2013-04-01

Electroactive Polymer (EAP) has gained increasing focus, in research communities, in last two decades. Research within the field of EAP has, so far, been mainly focused on material improvements, characterization, modeling and developing demonstrators. As the EAP technology matures, the need for a new area of research namely product development emerges. Product development can be based on an isolated design and production for a single product or platform design where a product family is developed. In platform design the families of products exploits commonality of platform modules while satisfying a variety of different market segments. Platform based approach has the primary benefit of being cost efficient and short lead time to market when new products emerges. Products development based on EAP technology is challenging both technologically as well as from production and processing point of view. Both the technological and processing challenges need to be addressed before a successful implementation of EAP technology into products. Based on this need Danfoss PolyPower A/S has, in 2011, launched a EAP platform project in collaboration with three Danish universities and three commercial organizations. The aim of the project is to develop platform based designs and product family for the EAP components to be used in variety of applications. This paper presents the structure of the platform project as a whole and specifically the platform based designs of EAP transducers. The underlying technologies, essential for EAP transducers, are also presented. Conceptual design and solution for the concepts are presented as well.

14 CFR 1216.305 - Criteria for actions requiring environmental assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... spacecraft development and flight projects in space and terrestrial applications. (3) Specific experimental projects in aeronautics and space technology and energy technology applications. (4) Development and... technology applications (e.g., Research and Technology Base, Systems Technology Programs) other than...

Development of High Temperature Gas Sensor Technology

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Chen, Liang-Yu; Neudeck, Philip G.; Knight, Dak; Liu, Chung-Chiun; Wu, Quing-Hai; Zhou, Huan-Jun

1997-01-01

The measurement of engine emissions is important for their monitoring and control. However, the ability to measure these emissions in-situ is limited. We are developing a family of high temperature gas sensors which are intended to operate in harsh environments such as those in an engine. The development of these sensors is based on progress in two types of technology: (1) The development of SiC-based semiconductor technology; and (2) Improvements in micromachining and microfabrication technology. These technologies are being used to develop point-contact sensors to measure gases which are important in emission control especially hydrogen, hydrocarbons, nitrogen oxides, and oxygen. The purpose of this paper is to discuss the development of this point-contact sensor technology. The detection of each type of gas involves its own challenges in the fields of materials science and fabrication technology. Of particular importance is sensor sensitivity, selectivity, and stability in long-term, high temperature operation. An overview is presented of each sensor type with an evaluation of its stage of development. It is concluded that this technology has significant potential for use in engine applications but further development is necessary.

Data-Base Software For Tracking Technological Developments

NASA Technical Reports Server (NTRS)

Aliberti, James A.; Wright, Simon; Monteith, Steve K.

1996-01-01

Technology Tracking System (TechTracS) computer program developed for use in storing and retrieving information on technology and related patent information developed under auspices of NASA Headquarters and NASA's field centers. Contents of data base include multiple scanned still images and quick-time movies as well as text. TechTracS includes word-processing, report-editing, chart-and-graph-editing, and search-editing subprograms. Extensive keyword searching capabilities enable rapid location of technologies, innovators, and companies. System performs routine functions automatically and serves multiple users.

Lunar In Situ Materials-Based Surface Structure Technology Development Efforts at NASA/MSFC

NASA Technical Reports Server (NTRS)

Fiske, M. R.; McGregor, W.; Pope, R.; McLemore, C. A.; Kaul, R.; Smithers, G.; Ethridge, E.; Toutanji, H.

2007-01-01

For long-duration missions on other planetary bodies, the use of in situ materials will become increasingly critical. As man's presence on these bodies expands, so must the structures to accommodate them, including habitats, laboratories, berms, radiation shielding for surface reactors, garages, solar storm shelters, greenhouses, etc. The use of in situ materials will significantly offset required launch upmass and volume issues. Under the auspices of the In Situ Fabrication & Repair (ISFR) Program at NASA/Marshall Space Flight Center (MSFC), the Surface Structures project has been developing materials and construction technologies to support development of these in situ structures. This paper will report on the development of several of these technologies at MSFC's Prototype Development Laboratory (PDL). These technologies include, but are not limited to, development of extruded concrete and inflatable concrete dome technologies based on waterless and water-based concretes, development of regolith-based blocks with potential radiation shielding binders including polyurethane and polyethylene, pressure regulation systems for inflatable structures, production of glass fibers and rebar derived from molten lunar regolith simulant, development of regolithbag structures, and others, including automation design issues. Results to date and lessons learned will be presented, along with recommendations for future activities.

Lunar In Situ Materials-Based Habitat Technology Development Efforts at NASA/MSFC

NASA Technical Reports Server (NTRS)

Bodiford, Melanie P.; Burks, K. H.; Perry M. R.; Cooper, R. W.; Fiske, M. R.

2006-01-01

For long duration missions on other planetary bodies, the use of in situ materials will become increasingly critical. As man's presence on these bodies expands, so must the structures to accommodate them including habitats, laboratories, berms, garages, solar storm shelters, greenhouses, etc. The use of in situ materials will significantly offset required launch upmass and volume issues. Under the auspices of the In Situ Fabrication & Repair (ISFR) Program at NASA/Marshall Space Flight Center (MSFC), the Habitat Structures project has been developing materials and construction technologies to support development of these in situ structures. This paper will report on the development of several of these technologies at MSFC's Prototype Development Laboratory (PDL). These technologies include, but are not limited to, development of extruded concrete and inflatable concrete dome technologies based on waterless and water-based concretes, development of regolith-based blocks with potential radiation shielding binders including polyurethane and polyethylene, pressure regulation systems for inflatable structures, production of glass fibers and rebar derived from molten lunar regolith simulant, development of regolithbag structures, and others, including automation design issues. Results to date and planned efforts for FY06 will also be presented.

Technology for subsystems of space-based plant growth facilities

NASA Technical Reports Server (NTRS)

Bula, R. J.; Morrow, R. C.; Tibbitts, T. W.; Corey, R. B.

1990-01-01

Technologies for different subsystems of space-based plant growth facilities are being developed at the Wisconsin Center for Space Automation and Robotics, a NASA Center for the Commercial Development of Space. The technologies include concepts for water and nutrient delivery, for nutrient composition control, and for irradiation. Effort is being concentrated on these subsystems because available technologies cannot be effectively utilized for space applications.

Conservation and renewable energy technologies for transportation

NASA Astrophysics Data System (ADS)

1990-11-01

The Office of Transportation Technologies (OTT) is charged with long-term, high-risk, and potentially high-payoff research and development of promising transportation technologies that are unlikely to be undertaken by the private sector alone. OTT activities are designed to develop an advanced technology base within the U.S. transportation industry for future manufacture of more energy-efficient, fuel-flexible, and environmentally sound transportation systems. OTT operations are focused on three areas: advanced automotive propulsion systems including gas turbines, low heat rejection diesel, and electric vehicle technologies; advanced materials development and tribology research; and research, development, demonstration, test, and evaluation (including field testing in fleet operations) of alternative fuels. Five papers describing the transportation technologies program have been indexed separately for inclusion on the data base.

Development of a Web-based financial application System

NASA Astrophysics Data System (ADS)

Hasan, M. R.; Ibrahimy, M. I.; Motakabber, S. M. A.; Ferdaus, M. M.; Khan, M. N. H.; Mostafa, M. G.

2013-12-01

The paper describes a technique to develop a web based financial system, following latest technology and business needs. In the development of web based application, the user friendliness and technology both are very important. It is used ASP .NET MVC 4 platform and SQL 2008 server for development of web based financial system. It shows the technique for the entry system and report monitoring of the application is user friendly. This paper also highlights the critical situations of development, which will help to develop the quality product.

Cell Phone-Based and Adherence Device Technologies for HIV Care and Treatment in Resource-Limited Settings: Recent Advances.

PubMed

Campbell, Jeffrey I; Haberer, Jessica E

2015-12-01

Numerous cell phone-based and adherence monitoring technologies have been developed to address barriers to effective HIV prevention, testing, and treatment. Because most people living with HIV and AIDS reside in resource-limited settings (RLS), it is important to understand the development and use of these technologies in RLS. Recent research on cell phone-based technologies has focused on HIV education, linkage to and retention in care, disease tracking, and antiretroviral therapy adherence reminders. Advances in adherence devices have focused on real-time adherence monitors, which have been used for both antiretroviral therapy and pre-exposure prophylaxis. Real-time monitoring has recently been combined with cell phone-based technologies to create real-time adherence interventions using short message service (SMS). New developments in adherence technologies are exploring ingestion monitoring and metabolite detection to confirm adherence. This article provides an overview of recent advances in these two families of technologies and includes research on their acceptability and cost-effectiveness when available. It additionally outlines key challenges and needed research as use of these technologies continues to expand and evolve.

Re-Entry: Inflatable Technology Development in Russian Collaboration (RITD)

NASA Astrophysics Data System (ADS)

Koryanov, V. V.; Kazakovtsev, V. P.; Harri, A.-M.; Da-Poian, V.

2018-04-01

Technology has been developed specifically for launching spacecraft into the planet's atmosphere. The technology is based on the concept of using inflatable braking device, which was originally developed for landing in conditions of Mars.

A potential disruptive technology in vaccine development: gene-based vaccines and their application to infectious diseases.

PubMed

Kaslow, David C

2004-10-01

Vaccine development requires an amalgamation of disparate disciplines and has unique economic and regulatory drivers. Non-viral gene-based delivery systems, such as formulated plasmid DNA, are new and potentially disruptive technologies capable of providing 'cheaper, simpler, and more convenient-to-use' vaccines. Typically and somewhat ironically, disruptive technologies have poorer product performance, at least in the near-term, compared with the existing conventional technologies. Because successful product development requires that the product's performance must meet or exceed the efficacy threshold for a desired application, the appropriate selection of the initial product applications for a disruptive technology is critical for its successful evolution. In this regard, the near-term successes of gene-based vaccines will likely be for protection against bacterial toxins and acute viral and bacterial infections. Recent breakthroughs, however, herald increasing rather than languishing performance improvements in the efficacy of gene-based vaccines. Whether gene-based vaccines ultimately succeed in eliciting protective immunity in humans to persistent intracellular pathogens, such as HIV, malaria and tuberculosis, for which the conventional vaccine technologies have failed, remains to be determined. A success against any one of the persistent intracellular pathogens would be sufficient proof that gene-based vaccines represent a disruptive technology against which future vaccine technologies will be measured.

76 FR 12343 - Technology and Media Services for Individuals With Disabilities-Steppingstones of Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

... two phases: (1) Development and (2) research on effectiveness. Abstracts of projects funded under... approaches. Phase 2 projects must subject technology-based approaches to rigorous field-based research to... scientifically rigorous research or theory, that demonstrates the potential effectiveness of the technology-based...

Developing an instrument for assessing students' concepts of the nature of technology

NASA Astrophysics Data System (ADS)

Liou, Pey-Yan

2015-05-01

Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable instrument. This study provides a useful questionnaire for educational researchers and practitioners for measuring students' concepts of the nature of technology.

An intervention fidelity framework for technology-based behavioral interventions.

PubMed

Devito Dabbs, Annette; Song, Mi-Kyung; Hawkins, Robert; Aubrecht, Jill; Kovach, Karen; Terhorst, Lauren; Connolly, Mary; McNulty, Mary; Callan, Judith

2011-01-01

Despite the proliferation of health technologies, descriptions of the unique considerations and practical guidance for evaluating the intervention fidelity of technology-based behavioral interventions are lacking. The aims of this study were to (a) discuss how technology-based behavioral interventions challenge conventions about how intervention fidelity is conceptualized and evaluated, (b) propose an intervention fidelity framework that may be more appropriate for technology-based behavioral interventions, and (c) present a plan for operationalizing each concept in the framework using the intervention fidelity monitoring plan for Pocket PATH (Personal Assistant for Tracking Health), a mobile health technology designed to promote self-care behaviors after lung transplantation, as an exemplar. The literature related to intervention fidelity and technology acceptance was used to identify the issues that are unique to the fidelity of technology-based behavioral interventions and thus important to include in a proposed intervention fidelity framework. An intervention fidelity monitoring plan for technology-based behavioral interventions was developed as an example. The intervention fidelity monitoring plan was deemed feasible and practical to implement and showed utility in operationalizing the concepts such as assessing interventionists' delivery and participants' acceptance of the technology-based behavioral intervention. The framework has the potential to guide the development of implementation fidelity monitoring tools for other technology-based behavioral interventions. Further application and testing of this framework will allow for a better understanding of the role that technology acceptance plays in the adoption and enactment of the behaviors that technology-based behavioral interventions are intended to promote.

Technology-Based Professional Development for Teaching and Learning in K-12 Classrooms

ERIC Educational Resources Information Center

Byrd, Nijia

2017-01-01

In an urban Georgia school district, teacher satisfaction surveys revealed that technology-based professional development was not equipping teachers with the skills or support needed to implement technology into their teaching practices. The purpose of this mixed-methods case study was to explore teachers' experiences and perceptions of…

Developing a Model for Technology-Based Museum School Partnerships

ERIC Educational Resources Information Center

Sanger, Erika; Silverman, Stan; Kraybill, Anne

2015-01-01

In 2012, The New York Institute of Technology and the Albany Institute of History & Art collaborated to increase the capacity of museum educators and classroom teachers to develop successful partnerships and deliver new programs through the use of web-based technologies. The project aligned the content expertise of museum educators from…

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Glenn's Strategic Partnerships With HBCUs and OMUs

NASA Technical Reports Server (NTRS)

Kankam, M. David

2003-01-01

NASA senior management has identified the need to develop a strategy for increased contracting with the historically black colleges and universities (HBCUs) and other minority universities (OMUs). The benefits to the institutions, by partnering with NASA, include developing their industrial base via NASA-industry partnerships, strong competitive advantage in technology-based research opportunities, and improved research capabilities. NASA gains increased contributed value to the Agency missions and programs as well as potential future recruits from technology-trained students who also constitute a pool for the nation s workforce. This report documents synergistic links between Glenn Research Center research and technology programs and faculty expertise at HBCUs and OMUs. The links are derived, based on Glenn technologies in the various directorates, program offices, and project offices. Such links readily identify universities with faculty members who are knowledgeable or have backgrounds in the listed technologies for possible collaboration. Recommendations are made to use the links as opportunities for Glenn and NASA, as well as industry collaborators, to cultivate stronger partnerships with the universities. It is concluded that Glenn and its partners and collaborators can expect to mutually benefit from leveraging NASA s cutting-edge and challenging research and technologies; industry's high technology development, research and development facilities, system design capabilities and market awareness; and academia s expertise in basic research and relatively low overhead cost. Reduced cost, accelerated technology development, technology transfer, and infrastructure development constitute some of the derived benefits.

Electrically Driven Thermal Management: Flight Validation, Experiment Development, Future Technologies

NASA Technical Reports Server (NTRS)

Didion, Jeffrey R.

2018-01-01

Electrically Driven Thermal Management is an active research and technology development initiative incorporating ISS technology flight demonstrations (STP-H5), development of Microgravity Science Glovebox (MSG) flight experiment, and laboratory-based investigations of electrically based thermal management techniques. The program targets integrated thermal management for future generations of RF electronics and power electronic devices. This presentation reviews four program elements: i.) results from the Electrohydrodynamic (EHD) Long Term Flight Demonstration launched in February 2017 ii.) development of the Electrically Driven Liquid Film Boiling Experiment iii.) two University based research efforts iv.) development of Oscillating Heat Pipe evaluation at Goddard Space Flight Center.

Collaborative project-based learning: an integrative science and technological education project

NASA Astrophysics Data System (ADS)

Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

2017-04-01

Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills.

Science Teacher Efficacy and Extrinsic Factors Toward Professional Development Using Video Games in a Design-Based Research Model: The Next Generation of STEM Learning

NASA Astrophysics Data System (ADS)

Annetta, Leonard A.; Frazier, Wendy M.; Folta, Elizabeth; Holmes, Shawn; Lamb, Richard; Cheng, Meng-Tzu

2013-02-01

Designed-based research principles guided the study of 51 secondary-science teachers in the second year of a 3-year professional development project. The project entailed the creation of student-centered, inquiry-based, science, video games. A professional development model appropriate for infusing innovative technologies into standards-based curricula was employed to determine how science teacher's attitudes and efficacy where impacted while designing science-based video games. The study's mixed-method design ascertained teacher efficacy on five factors (General computer use, Science Learning, Inquiry Teaching and Learning, Synchronous chat/text, and Playing Video Games) related to technology and gaming using a web-based survey). Qualitative data in the form of online blog posts was gathered during the project to assist in the triangulation and assessment of teacher efficacy. Data analyses consisted of an Analysis of Variance and serial coding of teacher reflective responses. Results indicated participants who used computers daily have higher efficacy while using inquiry-based teaching methods and science teaching and learning. Additional emergent findings revealed possible motivating factors for efficacy. This professional development project was focused on inquiry as a pedagogical strategy, standard-based science learning as means to develop content knowledge, and creating video games as technological knowledge. The project was consistent with the Technological Pedagogical Content Knowledge (TPCK) framework where overlapping circles of the three components indicates development of an integrated understanding of the suggested relationships. Findings provide suggestions for development of standards-based science education software, its integration into the curriculum and, strategies for implementing technology into teaching practices.

Development of a Knowledge Base for Enduser Consultation of AAL-Systems.

PubMed

Röll, Natalie; Stork, Wilhelm; Rosales, Bruno; Stephan, René; Knaup, Petra

2016-01-01

Manufacturer information, user experiences and product availability of assistive living technologies are usually not known to citizens or consultation centers. The different knowledge levels concerning the availability of technology shows the need for building up a knowledge base. The aim of this contribution is the definition of requirements in the development of knowledge bases for AAL consultations. The major requirements, such as a maintainable and easy to use structure were implemented into a web based knowledge base, which went productive in ~3700 consulting interviews of municipal technology information centers. Within this field phase the implementation of the requirements for a knowledge base in the field of AAL consulting was evaluated and further developed.

Advanced structures technology and aircraft safety

NASA Technical Reports Server (NTRS)

Mccomb, H. G., Jr.

1983-01-01

NASA research and development on advanced aeronautical structures technology related to flight safety is reviewed. The effort is categorized as research in the technology base and projects sponsored by the Aircraft Energy Efficiency (ACEE) Project Office. Base technology research includes mechanics of composite structures, crash dynamics, and landing dynamics. The ACEE projects involve development and fabrication of selected composite structural components for existing commercial transport aircraft. Technology emanating from this research is intended to result in airframe structures with improved efficiency and safety.

New Challenging Approaches to Engineering Education: Enhancing University-Industry Co-Operation

ERIC Educational Resources Information Center

Korhonen-Yrjanheikki, Kati; Tukiainen, Taina; Takala, Minna

2007-01-01

Globalization, accelerated time-based competition, qualitative dynamics, rapid development of technology and especially Information and Communications Technology (ICT) developments challenge engineering education and capability development of each engineer. The success and the competitiveness of companies are increasingly based on their employees.…

[Classification and organization technologies in public health].

PubMed

Filatov, V B; Zhiliaeva, E P; Kal'fa, Iu I

2000-01-01

The authors discuss the impact and main characteristics of organization technologies in public health and the processes of their development and evaluation. They offer an original definition of the notion "organization technologies" with approaches to their classification. A system of logical bases is offered, which can be used for classification. These bases include the level of organization maturity and stage of development of organization technology, its destination to a certain level of management, type of influence and concentration of trend, mechanism of effect, functional group, and methods of development.

Career Development and Counseling Strategies in an Age of Technology.

ERIC Educational Resources Information Center

Hu, Xiaolu; Toman, Sarah

The technology revolution not only brings new channels of global communication, but also brings unprecedented changes that can impact America's workforce. This paper highlights the impact of technology and knowledge-based economies to career development and the new concept and strategies that need to be developed. The technology revolution brings…

"Learning to Assess" and "Assessing to Learn": The Construction of Knowledge about Assistive Technology

ERIC Educational Resources Information Center

Folkes, Clare; Carmichael, Patrick

2006-01-01

A key role in the development and deployment of Assistive Technology solutions is that of the "assessor-consultant". Assessor-consultants for the UK-based charity Abilitynet work with clients to develop customized computer-based assistive technology systems and draw on a range of shared knowledge from the assessor-consultant community.…

An Evaluation of a School-Based Professional Development Program on Teachers' Efficacy for Technology Integration: Findings from an Initial Study

ERIC Educational Resources Information Center

Skoretz, Yvonne; Childress, Ronald

2013-01-01

The purpose of this program evaluation was to determine the impact of a school-based, job-embedded professional development program on elementary and middle school teacher efficacy for technology integration. Participant bi-weekly journal postings were analyzed using Grappling's "Technology and Learning Spectrum" (Porter, 2001) to…

Design and Implementation of Campus Application APP Based on Android

NASA Astrophysics Data System (ADS)

dongxu, Zhu; yabin, liu; xian lei, PI; weixiang, Zhou; meng, Huang

2017-07-01

In this paper, "Internet + campus" as the entrance of the Android technology based on the application of campus design and implementation of Application program. Based on GIS(Geographic Information System) spatial database, GIS spatial analysis technology, Java development technology and Android development technology, this system server adopts the Model View Controller architectue to realize the efficient use of campus information and provide real-time information of all kinds of learning and life for campus student at the same time. "Fingertips on the Institute of Disaster Prevention Science and Technology" release for the campus students of all grades of life, learning, entertainment provides a convenient.

Critical gases for critical issues: CO2 technologies for oral drug delivery.

PubMed

Danan, Hana; Esposito, Pierandrea

2014-02-01

In recent years, CO2-based technologies have gained considerable interest in the pharmaceutical industry for their potential applications in drug formulation and drug delivery. The exploitation of peculiar properties of gases under supercritical conditions has been studied in the last 20 years with mixed results. Promising drug-delivery technologies, based on supercritical CO2, have mostly failed when facing challenges of industrial scaleability and economical viability. Nevertheless, a 'second generation' of processes, based on CO2 around and below critical point has been developed, possibly offering technology-based solutions to some of the current issues of pharmaceutical development. In this review, we highlight the most recent advancements in this field, with a particular focus on the potential of CO2-based technologies in addressing critical issues in oral delivery, and briefly discuss the future perspectives of dense CO2-assisted processes as enabling technologies in drug delivery.

Overview of MEMS/NEMS technology development for space applications at NASA/JPL

NASA Astrophysics Data System (ADS)

George, Thomas

2003-04-01

This paper highlights the current technology development activities of the MEMS Technology Group at JPL. A diverse range of MEMS/NEMS technologies are under development, that are primarily applicable to NASA"s needs in the area of robotic planetary exploration. MEMS/NEMS technologies have obvious advantages for space applications, since they offer the promise of highly capable devices with ultra low mass, size and power consumption. However, the key challenge appears to be in finding efficient means to transition these technologies into "customer" applications. A brief description of this problem is presented along with the Group"s innovative approach to rapidly advance the maturity of technologies via insertion into space missions. Also described are some of the major capabilities of the MEMS Technology Group. A few important examples from among the broad classes of technologies being developed are discussed, these include the "Spider Web Bolometer", High-Performance Miniature Gyroscopes, an Electron Luminescence X-ray Spectrometer, a MEMS-based "Knudsen" Thermal Transpiration pump, MEMS Inchworm Actuators, and Nanowire-based Biological/Chemical Sensors.

Evaluation of alternative future energy scenarios for Brazil using an energy mix model

NASA Astrophysics Data System (ADS)

Coelho, Maysa Joppert

The purpose of this study is to model and assess the performance and the emissions impacts of electric energy technologies in Brazil, based on selected economic scenarios, for a time frame of 40 years, taking the year of 1995 as a base year. A Base scenario has been developed, for each of three economic development projections, based upon a sectoral analysis. Data regarding the characteristics of over 300 end-use technologies and 400 energy conversion technologies have been collected. The stand-alone MARKAL technology-based energy-mix model, first developed at Brookhaven National Laboratory, was applied to a base case study and five alternative case studies, for each economic scenario. The alternative case studies are: (1) minimum increase in the thermoelectric contribution to the power production system of 20 percent after 2010; (2) extreme values for crude oil price; (3) minimum increase in the renewable technologies contribution to the power production system of 20 percent after 2010; (4) uncertainty on the cost of future renewable conversion technologies; and (5) model is forced to use the natural gas plants committed to be built in the country. Results such as the distribution of fuel used for power generation, electricity demand across economy sectors, total CO2 emissions from burning fossil fuels for power generation, shadow price (marginal cost) of technologies, and others, are evaluated and compared to the Base scenarios previous established. Among some key findings regarding the Brazilian energy system it may be inferred that: (1) diesel technologies are estimated to be the most cost-effective thermal technology in the country; (2) wind technology is estimated to be the most cost-effective technology to be used when a minimum share of renewables is imposed to the system; and (3) hydroelectric technologies present the highest cost/benefit relation among all conversion technologies considered. These results are subject to the limitations of key input assumptions and key assumptions of modeling framework, and are used as the basis for recommendations regarding energy development priorities for Brazil.

School-Based Technology Use Planning.

ERIC Educational Resources Information Center

Cradler, John

1994-01-01

Describes how to conduct systematic planning for technology use. The components of an effective technology use plan, derived from a comprehensive study of school-based technology, are given. Planning development, implementation, and evaluation steps are provided. Ten planning resource books are listed. (Contains five references.) (KRN)

Sustainability Logistics Basing - Science and Technology Objective - Demonstration; 50, 300, 1000- Person Base Camp, Analysis of FY12 Operationally Relevant Technical Baseline

DTIC Science & Technology

2017-04-10

Natick Soldier Research , Development and Engineering Center’s Sustainability/Logistics- Basing -Science and Technology Objective – Demonstration to...CERDEC)  Tank Automotive Research , Development, and Engineering Center (TARDEC)  Product Director Contingency Basing Infrastructure (PdD – CBI...assessed using the QoL (O) tool, developed for the SLB-STO-D program by the Consumer Research Team (NSRDEC), based upon the assumptions documented within

Information Technology for Economic and Social Benefit--Options for Bangladesh.

ERIC Educational Resources Information Center

Bhuiyan, Farhad Ali

2002-01-01

Considers how information technology (IT) can help socioeconomic growth of developing countries based on experiences in Bangladesh. Topics include Bangladesh's development plans; future economic growth trends triggered by IT; emerging technologies; intellectual and societal development; industrial revolutions; telematics; regional and world…

Development and Construction of the Multimedia Web-Based Courses Based on ASP

ERIC Educational Resources Information Center

Wang, Yu; Liu, Jianbo

2011-01-01

With the quick development of internet and computer technology, more and more information acquirers begin to more depend on the network, and for the transmission route of knowledge, the advantageous state of web-based courses becomes more and more obvious. The support of modern education technology for the web-based courses would gradually replace…

Technology base for microgravity horticulture

NASA Technical Reports Server (NTRS)

Sauer, R. L.; Magnuson, J. W.; Scruby, R. R.; Scheld, H. W.

1987-01-01

Advanced microgravity plant biology research and life support system development for the spacecraft environment are critically hampered by the lack of a technology base. This inadequacy stems primarily from the fact that microgravity results in a lack of convective currents and phase separation as compared to the one gravity environment. A program plan is being initiated to develop this technology base. This program will provide an iterative flight development effort that will be closely integrated with both basic science investigations and advanced life support system development efforts incorporating biological processes. The critical considerations include optimum illumination methods, root aeration, root and shoot support, and heat rejection and gas exchange in the plant canopy.

Research Trends in Technology-Based Learning from 2000 to 2009: A Content Analysis of Publications in Selected Journals

ERIC Educational Resources Information Center

Hsu, Yu-Chen; Ho, Hsin Ning Jessie; Tsai, Chin-Chung; Hwang, Gwo-Jen; Chu, Hui-Chun; Wang, Chin-Yeh; Chen, Nian-Shing

2012-01-01

This paper provides a content analysis of studies in technology-based learning (TBL) that were published in five Social Sciences Citation Index (SSCI) journals (i.e. "the British Journal of Educational Technology, Computers & Education, Educational Technology Research & Development, Educational Technology & Society, the Journal of Computer…

Middle School Mathematics Teachers' Experiences with School-Based and District-Based Support and Its Relationship to Integrating Technology

ERIC Educational Resources Information Center

Hampshire, Onequa N.

2014-01-01

Technological advances play a major role in educating students' in mathematics. Research indicates that technology could create learning environments that support innovativeness and assist teachers in developing a positive attitude toward integrating technology. Unfortunately, teachers are not utilizing technology on a regular basis in mathematics…

Towards a Socio-Cultural Framework for the Analysis of Joint Student-Teacher Development over Technology-Based Mathematics Lessons

ERIC Educational Resources Information Center

Monaghan, John

2013-01-01

This paper offers a framework, an extension of Valsiner's "zone theory", for the analysis of joint student-teacher development over a series of technology-based mathematics lessons. The framework is suitable for developing research studies over a moderately long period of time and considers interrelated student-teacher development as…

Net Generation of Youth: A Case Study of Students in a Technology-Based Youth Development Program

ERIC Educational Resources Information Center

James, Coran

2013-01-01

The purpose of this interpretive study was to understand how students made sense of their experiences in a technology-based youth development program. This study was framed by James P. Connell and Michelle A. Gambone's, Community Action Framework for Youth Development, conceptual model for understanding youth development that identifies the…

Digital Signal Processing Based Biotelemetry Receivers

NASA Technical Reports Server (NTRS)

Singh, Avtar; Hines, John; Somps, Chris

1997-01-01

This is an attempt to develop a biotelemetry receiver using digital signal processing technology and techniques. The receiver developed in this work is based on recovering signals that have been encoded using either Pulse Position Modulation (PPM) or Pulse Code Modulation (PCM) technique. A prototype has been developed using state-of-the-art digital signal processing technology. A Printed Circuit Board (PCB) is being developed based on the technique and technology described here. This board is intended to be used in the UCSF Fetal Monitoring system developed at NASA. The board is capable of handling a variety of PPM and PCM signals encoding signals such as ECG, temperature, and pressure. A signal processing program has also been developed to analyze the received ECG signal to determine heart rate. This system provides a base for using digital signal processing in biotelemetry receivers and other similar applications.

Development, evaluation and application of performance-based brake testing technologies field test : executive summary

DOT National Transportation Integrated Search

1999-09-01

This report presents the results of the field test portion of the Development, Evaluation, and Application of Performance-Based Brake Testing Technologies sponsored by the Federal Highway Administrations (FHWA) Office of Motor Carriers.

Development and Application of Microfabricated Chemical Gas Sensors For Aerospace Applications

NASA Technical Reports Server (NTRS)

Hunter, G. W.; Neudeck, P. G.; Fralick, G.; Thomas, V.; Liu, C. C.; Wu, Q. H.; Sawayda, M. S.; Jin, A.; Hammond, J.; Makel, D.;

Rovers Pave the Way for Hospital Robots

NASA Technical Reports Server (NTRS)

2013-01-01

The Jet Propulsion Laboratory provided funding for the Massachusetts Institute of Technology to develop capabilities for robotics like Rocky 7. After developing the operating system, Daniel Theobald started working at Cambridge, Massachusetts-based Vecna Technologies. Today, Vecna's QC Bot incorporates systems based on the NASA work and is being used to ease logistics at hospitals. The technology has contributed to 20 new jobs.

Enhancing emergency care in low-income countries using mobile technology-based training tools

PubMed Central

Edgcombe, Hilary; Paton, Chris; English, Mike

2016-01-01

In this paper, we discuss the role of mobile technology in developing training tools for health workers, with particular reference to low-income countries (LICs). The global and technological context is outlined, followed by a summary of approaches to using and evaluating mobile technology for learning in healthcare. Finally, recommendations are made for those developing and using such tools, based on current literature and the authors' involvement in the field. PMID:27658948

Research on Upgrade Path to Technology Innovation of Resource-based SMEs in China

NASA Astrophysics Data System (ADS)

Jie, Xu

2017-08-01

Complexity, diversity and coordination are features of technology innovation of resource-based SMEs in China. This paper studies on the key factors of macro-environment, cooperation among enterprises and enterprise interior, which influence the upgrading of technology innovation of resource-based SMEs in China. This paper constructs integrated system of technology innovation to analyse the upgrade path to technology innovation of resource-based SMEs in China, so that enterprises would improve their technology innovation and get a new way to accomplish sustainable innovated development.

Developing Technology Teachers: Questioning the Industrial Tool Use Model

ERIC Educational Resources Information Center

Hansen, John W.; Lovedahl, Gerald G.

2004-01-01

In this article, the author questions the role of technology teacher preparation programs that are based on an "industrial tool use" model to develop technology education teachers. It is the position of the authors that the manner by which technology education teachers are prepared may need revision and that technology teacher educators…

Critical soft landing technology issues for future US space missions

NASA Technical Reports Server (NTRS)

Macha, J. M.; Johnson, D. W.; Mcbride, D. D.

1992-01-01

A programmatic need for research and development to support parachute-based landing systems has not existed since the end of the Apollo missions in the mid-1970s. Now, a number of planned space programs require advanced landing capabilities for which the experience and technology base does not currently exist. New requirements for landing on land with controllable, gliding decelerators and for more effective impact attenuation devices justify a renewal of the landing technology development effort that existed during the Mercury, Gemini, and Apollo programs. A study was performed to evaluate the current and projected national capability in landing systems and to identify critical deficiencies in the technology base required to support the Assured Crew Return Vehicle and the Two-Way Manned Transportation System. A technology development program covering eight landing system performance issues is recommended.

Technology Development Risk Assessment for Space Transportation Systems

NASA Technical Reports Server (NTRS)

Mathias, Donovan L.; Godsell, Aga M.; Go, Susie

2006-01-01

A new approach for assessing development risk associated with technology development projects is presented. The method represents technology evolution in terms of sector-specific discrete development stages. A Monte Carlo simulation is used to generate development probability distributions based on statistical models of the discrete transitions. Development risk is derived from the resulting probability distributions and specific program requirements. Two sample cases are discussed to illustrate the approach, a single rocket engine development and a three-technology space transportation portfolio.

[Patented technology status quo and development trend for Chinese herbal medicines].

PubMed

Li, Chang; Huang, Luqi

2009-06-01

Patent technology is regarded as technological trends under the market economy condition. The case showed the information form patent literature can be widely used in technology or economy. In this study, we analyzed the patent technology status quo and development trend for Chinese herbal medicines based on China patent database. The patent technology status quo is divided from the technology of biotechnology, quality control, cultivation and herb processing on Chinese herbal medicines. Furthermore, some recommendations of technology development and advices on patent protection for Chinese herbal medicines were suggested.

[Research advances in water quality monitoring technology based on UV-Vis spectrum analysis].

PubMed

Wei, Kang-Lin; Wen, Zhi-yu; Wu, Xin; Zhang, Zhong-Wei; Zeng, Tian-Ling

2011-04-01

The application of spectral analysis to water quality monitoring is an important developing trend in the field of modern environment monitoring technology. The principle and characteristic of water quality monitoring technology based on UV-Vis spectrum analysis are briefly reviewed. And the research status and advances are introduced from two aspects, on-line monitoring and in-situ monitoring. Moreover, the existent key technical problems are put forward. Finally, the technology trends of multi-parameter water quality monitoring microsystem and microsystem networks based on microspectrometer are prospected, which has certain reference value for the research and development of environmental monitoring technology and modern scientific instrument in the authors' country.

75 FR 52373 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

... Administration. Type of Review: NEW. Title of Collection: Evaluation of the Technology-Based Learning Grants. OMB... technology based learning. The initiative increases worker access to training while stimulating the development of innovative models and uses for technology based learning in the public workforce system. For...

Designing and Evaluating a Professional Development Programme for Basic Technology Integration in English as a Foreign Language (EFL) Classrooms

ERIC Educational Resources Information Center

Ansyari, Muhammad Fauzan

2015-01-01

This study aims to develop and evaluate a professional development programme for technology integration in an Indonesian university's English language teaching setting. The study explored the characteristics of this programme to English lecturers' technological pedagogical content knowledge (TPCK) development. This design-based research employed…

Cyrogenic Life Support Technology Development Project

NASA Technical Reports Server (NTRS)

Bush, David R.

2015-01-01

KSC has used cryogenic life support (liquid air based) technology successfully for many years to support spaceflight operations. This technology has many benefits unique to cryogenics when compared to traditional compressed gas systems: passive cooling, lighter, longer duration, and lower operating pressure. However, there are also several limiting factors that have prevented the technology from being commercialized. The National Institute of Occupational Safety and Health, Office of Mine Safety and Health Research (NIOSH-OMSHR) has partnered with NASA to develop a complete liquid air based life support solution for emergency mine escape and rescue. The project will develop and demonstrate various prototype devices and incorporate new technological innovations that have to date prevented commercialization.

Pre-Service Teachers' TPACK Development and Conceptions through a TPACK-Based Course

ERIC Educational Resources Information Center

Durdu, Levent; Dag, Funda

2017-01-01

This study examines pre-service teachers' Technological Pedagogical Content Knowledge (TPACK) development and analyses their conceptions of learning and teaching with technology. With this aim in mind, researchers designed and implemented a computer-based mathematics course based on a TPACK framework. As a research methodology, a parallel mixed…

Meeting the computer technology needs of community faculty: building new models for faculty development.

PubMed

Baldwin, Constance D; Niebuhr, Virginia N; Sullivan, Brian

2004-01-01

We aimed to identify the evolving computer technology needs and interests of community faculty in order to design an effective faculty development program focused on computer skills: the Teaching and Learning Through Educational Technology (TeLeTET) program. Repeated surveys were conducted between 1994 and 2002 to assess computer resources and needs in a pool of over 800 primary care physician-educators in community practice in East Texas. Based on the results, we developed and evaluated several models to teach community preceptors about computer technologies that are useful for education. Before 1998, only half of our community faculty identified a strong interest in developing their technology skills. As the revolution in telecommunications advanced, however, preceptors' needs and interests changed, and the use of this technology to support community-based teaching became feasible. In 1998 and 1999, resource surveys showed that many of our community teaching sites had computers and Internet access. By 2001, the desire for teletechnology skills development was strong in a nucleus of community faculty, although lack of infrastructure, time, and skills were identified barriers. The TeLeTET project developed several innovative models for technology workshops and conferences, supplemented by online resources, that were well attended and positively evaluated by 181 community faculty over a 3-year period. We have identified the evolving needs of community faculty through iterative needs assessments, developed a flexible faculty development curriculum, and used open-ended, formative evaluation techniques to keep the TeLeTET program responsive to a rapidly changing environment for community-based education in computer technology.

Development of Articulated Competency-Based Curriculum in Laser/Electro-Optics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

A project was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in cooperation with area vocational-technical schools, the first year of a competency-based curriculum in laser/electro-optics technology. Existing programs were reviewed and private sector input was sought in developing the curriculum and identifying…

Brainwave Monitoring Software Improves Distracted Minds

NASA Technical Reports Server (NTRS)

2014-01-01

Neurofeedback technology developed at Langley Research Center to monitor pilot awareness inspired Peter Freer to develop software for improving student performance. His company, Fletcher, North Carolina-based Unique Logic and Technology Inc., has gone on to develop technology for improving workplace and sports performance, monitoring drowsiness, and encouraging relaxation.

Atmosphere Revitalization Technology Development for Crewed Space Exploration

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Carrasquillo, Robyn L.; Harris, Danny W.

2006-01-01

As space exploration objectives extend human presence beyond low Earth orbit, the solutions to technological challenges presented by supporting human life in the hostile space environment must build upon experience gained during past and present crewed space exploration programs. These programs and the cabin atmosphere revitalization process technologies and systems developed for them represent the National Aeronautics and Space Administration s (NASA) past and present operational knowledge base for maintaining a safe, comfortable environment for the crew. The contributions of these programs to the NASA s technological and operational working knowledge base as well as key strengths and weaknesses to be overcome are discussed. Areas for technological development to address challenges inherent with the Vision for Space Exploration (VSE) are presented and a plan for their development employing unit operations principles is summarized

Using findings in multimedia learning to inform technology-based behavioral health interventions.

PubMed

Aronson, Ian David; Marsch, Lisa A; Acosta, Michelle C

2013-09-01

Clinicians and researchers are increasingly using technology-based behavioral health interventions to improve intervention effectiveness and to reach underserved populations. However, these interventions are rarely informed by evidence-based findings of how technology can be optimized to promote acquisition of key skills and information. At the same time, experts in multimedia learning generally do not apply their findings to health education or conduct research in clinical contexts. This paper presents an overview of some key aspects of multimedia learning research that may allow those developing health interventions to apply informational technology with the same rigor as behavioral science content. We synthesized empirical multimedia learning literature from 1992 to 2011. We identified key findings and suggested a framework for integrating technology with educational and behavioral science theory. A scientific, evidence-driven approach to developing technology-based interventions can yield greater effectiveness, improved fidelity, increased outcomes, and better client service.

FY04 Engineering Technology Reports Technology Base

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

Lawrence Livermore National Laboratory's Engineering Directorate has two primary discretionary avenues for its investment in technologies: the Laboratory Directed Research and Development (LDRD) program and the ''Tech Base'' program. This volume summarizes progress on the projects funded for technology-base efforts in FY2004. The Engineering Technical Reports exemplify Engineering's more than 50-year history of researching and developing (LDRD), and reducing to practice (technology-base) the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and technicalmore » resources. This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Tech Base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. The objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems. The Centers and their Directors are as follows: (1) Center for Computational Engineering: Robert M. Sharpe; (2) Center for Microtechnology and Nanotechnology: Raymond P. Mariella, Jr. (3) Center for Nondestructive Characterization: Harry E. Martz, Jr.; (4) Center for Precision Engineering: Keith Carlisle; and (5) Center for Complex Distributed Systems: Gregory J. Suski, Acting Director.« less

Adaption of space station technology for lunar operations

NASA Technical Reports Server (NTRS)

Garvey, J. M.

1992-01-01

Space Station Freedom technology will have the potential for numerous applications in an early lunar base program. The benefits of utilizing station technology in such a fashion include reduced development and facility costs for lunar base systems, shorter schedules, and verification of such technology through space station experience. This paper presents an assessment of opportunities for using station technology in a lunar base program, particularly in the lander/ascent vehicles and surface modules.

Developmental Challenges of SMES Technology for Applications

NASA Astrophysics Data System (ADS)

Rong, Charles C.; Barnes, Paul N.

2017-12-01

This paper reviews the current status of high temperature superconductor (HTS) based superconducting magnetic energy storage (SMES) technology as a developmental effort. Discussion centres on the major challenges in magnet optimization, loss reduction, cooling improvement, and new development of quench detection. The cryogenic operation for superconductivity in this technological application requires continued research and development, especially with a greater engineering effort that involves the end user. For the SMES-based technology to more fully mature, some suggestions are given for consideration and discussion.

Structures and materials technology needs for communications and remote sensing spacecraft

NASA Technical Reports Server (NTRS)

Gronet, M. J.; Jensen, G. A.; Hoskins, J. W.

1995-01-01

This report documents trade studies conducted from the perspective of a small spacecraft developer to determine and quantify the structures and structural materials technology development needs for future commercial and NASA small spacecraft to be launched in the period 1999 to 2005. Emphasis is placed on small satellites weighing less than 1800 pounds for two focus low-Earth orbit missions: commercial communications and remote sensing. The focus missions are characterized in terms of orbit, spacecraft size, performance, and design drivers. Small spacecraft program personnel were interviewed to determine their technology needs, and the results are summarized. A systems-analysis approach for quantifying the benefits of inserting advanced state-of-the-art technologies into a current reference, state-of-the-practice small spacecraft design is developed and presented. This approach is employed in a set of abbreviated trade studies to quantify the payoffs of using a subset of 11 advanced technologies selected from the interview results The 11 technology development opportunities are then ranked based on their relative payoff. Based on the strong potential for significant benefits, recommendations are made to pursue development of 8 and the 11 technologies. Other important technology development areas identified are recommended for further study.

Cloud based, Open Source Software Application for Mitigating Herbicide Drift

NASA Astrophysics Data System (ADS)

Saraswat, D.; Scott, B.

2014-12-01

The spread of herbicide resistant weeds has resulted in the need for clearly marked fields. In response to this need, the University of Arkansas Cooperative Extension Service launched a program named Flag the Technology in 2011. This program uses color-coded flags as a visual alert of the herbicide trait technology within a farm field. The flag based program also serves to help avoid herbicide misapplication and prevent herbicide drift damage between fields with differing crop technologies. This program has been endorsed by Southern Weed Science Society of America and is attracting interest from across the USA, Canada, and Australia. However, flags have risk of misplacement or disappearance due to mischief or severe windstorms/thunderstorms, respectively. This presentation will discuss the design and development of a cloud-based, free application utilizing open-source technologies, called Flag the Technology Cloud (FTTCloud), for allowing agricultural stakeholders to color code their farm fields for indicating herbicide resistant technologies. The developed software utilizes modern web development practices, widely used design technologies, and basic geographic information system (GIS) based interactive interfaces for representing, color-coding, searching, and visualizing fields. This program has also been made compatible for a wider usability on different size devices- smartphones, tablets, desktops and laptops.

Collaborative Project-Based Learning: An Integrative Science and Technological Education Project

ERIC Educational Resources Information Center

Baser, Derya; Ozden, M. Yasar; Karaarslan, Hasan

2017-01-01

Background: Blending collaborative learning and project-based learning (PBL) based on Wolff (2003) design categories, students interacted in a learning environment where they developed their technology integration practices as well as their technological and collaborative skills. Purpose: The study aims to understand how seventh grade students…

Accomplishments of Long-Term Research and Development

DOE R&D Accomplishments Database

Jordy, George Y.

1988-07-01

Technological breakthroughs cannot be penciled on the calendar in advance. The rate of new technological discovery, while highly uncertain, depends on a base of knowledge acquired earlier. In the economic environment of 1980, progress in basic research, which builds the technology base that will underpin future energy development by Government and industry, was being slowed as cost increases due to inflation grew faster than funding increase.

Why CATTS Needs SPACE! Standards-Based Technology Curricula for Standards-Based Technology Programs

ERIC Educational Resources Information Center

Burke, Barry N.

2005-01-01

A recent discussion on ITEA's (International Technology Education Association's) IdeaGarden centered on the need for a "national curriculum." The idea of a national curriculum is one of great debate. Advancing Excellence in Technological Literacy (AETL) identifies criteria for student assessment, professional development, and programs that…

Development of a Model-Based Systems Engineering Application for the Ground Vehicle Robotics Sustainment Industrial Base

DTIC Science & Technology

2013-02-04

Ground Vehicle Systems Engineering Technology Symposium HC Human Capital HIIT Helsinki Institute of Information Technology UNCLASSIFIED vii...Technology (TKK), and the Helsinki Institute of Information Technology ( HIIT ), the report introduced the concept and the state-of-the-art in the market

Research requirements for development of advanced-technology helicopter transmissions. [reduction of maintenance costs

NASA Technical Reports Server (NTRS)

Lemanski, A. J.

1976-01-01

Helicopter drive-system technology which would result in the largest benefit in direct maintenance cost when applied to civil helicopters in the 1980 timeframe was developed. A prototype baseline drive system based on 1975 technology provided the basis for comparison against the proposed advanced technology in order to determine the potential for each area recommended for improvement. A specific design example of an advanced-technology main transmission is presented to define improvements for maintainability, weight, producibility, reliability, noise, vibration, and diagnostics. Projections of the technology achievable in the 1980 timeframe are presented. Based on this data, the technologies with the highest payoff (lowest direct maintenance cost) for civil-helicopter drive systems are identified.

DELTA '90: Development of European Learning through Technological Advance. R + D Information and Communication Based Learning Technology.

ERIC Educational Resources Information Center

Mitchell, Hunter D., Ed.

This report describes in detail the DELTA (Developing European Learning through Technological Advance) 1990 program, which was designed to address issues related to the use of new emerging technologies in the areas of information technology, telecommunications, and broadcasting, for learning. Six chapters cover the following topics: (1)…

Use of Technology for Development and Alumni Relations among CASE Members. Research Report

ERIC Educational Resources Information Center

Council for Advancement and Support of Education, 2010

2010-01-01

This research explores the role of "advancement-enabling" technology in helping institutions meet their development and alumni relations goals. It includes data on how technology is being used, barriers to effective use of technology, and strategies for effective deployment of technology. The report is based on data provided by 357…

Develop nondestructive rapid pavement quality assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Develop nondestructive rapid pavement quality Assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Design of carbon therapy facility based on 10 years experience at HIMAC

NASA Astrophysics Data System (ADS)

Noda, K.; Furukawa, T.; Iwata, Y.; Kanai, T.; Kanazawa, M.; Kanematsu, N.; Kitagawa, A.; Komori, M.; Minohara, S.; Murakami, T.; Muramatsu, M.; Sato, S.; Sato, Y.; Shibuya, S.; Torikoshi, M.; Yamada, S.

2006-06-01

Since 1994, the clinical trial for cancer therapy with HIMAC has successfully progressed, and more than 2100 cancer patients have been treated with a carbon beam. Based on the development of the accelerator and irradiation technologies for 10 years, we have designed a new carbon-therapy facility for widespread use in Japan, and key technologies for the new facility have been developed. We describe the conceptual design of the new facility and the status of development for the key technologies.

Advanced technologies for Mission Control Centers

NASA Technical Reports Server (NTRS)

Dalton, John T.; Hughes, Peter M.

1991-01-01

Advance technologies for Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: technology needs; current technology efforts at GSFC (human-machine interface development, object oriented software development, expert systems, knowledge-based software engineering environments, and high performance VLSI telemetry systems); and test beds.

From Computer Lab to Technology Class.

ERIC Educational Resources Information Center

Sherwood, Sandra

1999-01-01

Discussion of integrating technology into elementary school classrooms focuses on teacher training that is based on a three-year plan developed at an elementary school in Marathon, New York. Describes the role of a technology teacher who facilitates technology integration by running the computer lab, offering workshops, and developing inservice…

National Institute of Occupational Safety and Health (NIOSH) Partnered Development of Cryogenic Life Support Technologies

NASA Technical Reports Server (NTRS)

Bush, David R.

2014-01-01

Partnering with National Institute of Occupational Safety and Health (NIOSH) to develop several cyrogenically based life support technologies to be used in mine escape and rescue scenarios. Technologies developed for mine rescue directly benefit future NASA rescue and ground operation missions.

Integrated Technology Assessment Center (ITAC) Update

NASA Technical Reports Server (NTRS)

Taylor, J. L.; Neely, M. A.; Curran, F. M.; Christensen, E. R.; Escher, D.; Lovell, N.; Morris, Charles (Technical Monitor)

2002-01-01

The Integrated Technology Assessment Center (ITAC) has developed a flexible systems analysis framework to identify long-term technology needs, quantify payoffs for technology investments, and assess the progress of ASTP-sponsored technology programs in the hypersonics area. For this, ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. Concepts for transportation systems are selected based on relevance to the ASTP and integrated concept models (ICM) of these concepts are developed. Key technologies of interest are identified and projections are made of their characteristics with respect to their impacts on key aspects of the specific concepts of interest. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework in ModelCenter. This framework permits rapid sensitivity analysis, single point design assessment, and a full probabilistic assessment of each concept with respect to both embedded and enhancing technologies. Probabilistic outputs are weighed against metrics of interest to ASTP using a multivariate decision making process to provide inputs for technology prioritization within the ASTP. ITAC program is currently finishing the assessment of a two-stage-to-orbit (TSTO), rocket-based combined cycle (RBCC) concept and a TSTO turbine-based combined cycle (TBCC) concept developed by the team with inputs from NASA. A baseline all rocket TSTO concept is also being developed for comparison. Boeing has recently submitted a performance model for their Flexible Aerospace System Solution for Tomorrow (FASST) concept and the ISAT program will provide inputs for a single-stage-to-orbit (SSTO) TBCC based concept in the near-term. Both of these latter concepts will be analyzed within the ITAC framework over the summer. This paper provides a status update of the ITAC program.

Transfer of radiation technology to developing countries

NASA Astrophysics Data System (ADS)

Markovic, Vitomir; Ridwan, Mohammad

1993-10-01

Transfer of technology is a complex process with many facets, options and constraints. While the concept is an important step in bringing industrialization process to agricultural based countries, it is clear, however, that a country will only benefit from a new technology if it addresses a real need, and if it can be absorbed and adapted to suit the existing cultural and technological base. International Atomic Energy Agency, as UN body, has a mandate to promote nuclear applicationsand assist Member States in transfer of technology for peaceful applications. This mandate has been pursued by many different mechanisms developed in the past years: technical assistance, coordinated research programmes, scientific and technical meetings, publications, etc. In all these activities the Agency is the organizer and initiator, but main contributions come from expert services from developed countries and, increasingly, from developing countries themselves. The technical cooperation among developing coutries more and more becomes part of different programmes. In particular, regional cooperation has been demonstrated as an effective instrument for transfer of technology from developed and among developing countries. Some examples of actual programmes are given.

A CRISPR/Cas9 and Cre/Lox system-based express vaccine development strategy against re-emerging Pseudorabies virus.

PubMed

Liang, Xun; Sun, Leqiang; Yu, Teng; Pan, Yongfei; Wang, Dongdong; Hu, Xueying; Fu, Zhenfang; He, Qigai; Cao, Gang

2016-01-18

Virus evolves rapidly to escape vaccine-induced immunity, posing a desperate demand for efficient vaccine development biotechnologies. Here we present an express vaccine development strategy based on CRISPR/Cas9 and Cre/Lox system against re-emerging Pseudorabies virus, which caused the recent devastating swine pseudorabies outbreak in China. By CRISPR/Cas9 system, the virulent genes of the newly isolated strain were simultaneously substituted by marker genes, which were subsequently excised using Cre/Lox system for vaccine safety concern. Notably, single cell FACS technology was applied to further promote virus purification efficiency. The combination of these state-of-art technologies greatly accelerated vaccine development. Finally, vaccination and challenge experiments proved this vaccine candidate's protective efficacy in pigs and the promise to control current pseudorabies outbreak. This is, to our knowledge, the first successful vaccine development based on gene edit technologies, demonstrating these technologies leap from laboratory to industry. It may pave the way for future express antiviral vaccine development.

A CRISPR/Cas9 and Cre/Lox system-based express vaccine development strategy against re-emerging Pseudorabies virus

PubMed Central

Liang, Xun; Sun, Leqiang; Yu, Teng; Pan, Yongfei; Wang, Dongdong; Hu, Xueying; Fu, Zhenfang; He, Qigai; Cao, Gang

2016-01-01

Virus evolves rapidly to escape vaccine-induced immunity, posing a desperate demand for efficient vaccine development biotechnologies. Here we present an express vaccine development strategy based on CRISPR/Cas9 and Cre/Lox system against re-emerging Pseudorabies virus, which caused the recent devastating swine pseudorabies outbreak in China. By CRISPR/Cas9 system, the virulent genes of the newly isolated strain were simultaneously substituted by marker genes, which were subsequently excised using Cre/Lox system for vaccine safety concern. Notably, single cell FACS technology was applied to further promote virus purification efficiency. The combination of these state-of-art technologies greatly accelerated vaccine development. Finally, vaccination and challenge experiments proved this vaccine candidate’s protective efficacy in pigs and the promise to control current pseudorabies outbreak. This is, to our knowledge, the first successful vaccine development based on gene edit technologies, demonstrating these technologies leap from laboratory to industry. It may pave the way for future express antiviral vaccine development. PMID:26777545

Entropy and gravity concepts as new methodological indexes to investigate technological convergence: patent network-based approach.

PubMed

Cho, Yongrae; Kim, Minsung

2014-01-01

The volatility and uncertainty in the process of technological developments are growing faster than ever due to rapid technological innovations. Such phenomena result in integration among disparate technology fields. At this point, it is a critical research issue to understand the different roles and the propensity of each element technology for technological convergence. In particular, the network-based approach provides a holistic view in terms of technological linkage structures. Furthermore, the development of new indicators based on network visualization can reveal the dynamic patterns among disparate technologies in the process of technological convergence and provide insights for future technological developments. This research attempts to analyze and discover the patterns of the international patent classification codes of the United States Patent and Trademark Office's patent data in printed electronics, which is a representative technology in the technological convergence process. To this end, we apply the physical idea as a new methodological approach to interpret technological convergence. More specifically, the concepts of entropy and gravity are applied to measure the activities among patent citations and the binding forces among heterogeneous technologies during technological convergence. By applying the entropy and gravity indexes, we could distinguish the characteristic role of each technology in printed electronics. At the technological convergence stage, each technology exhibits idiosyncratic dynamics which tend to decrease technological differences and heterogeneity. Furthermore, through nonlinear regression analysis, we have found the decreasing patterns of disparity over a given total period in the evolution of technological convergence. This research has discovered the specific role of each element technology field and has consequently identified the co-evolutionary patterns of technological convergence. These new findings on the evolutionary patterns of technological convergence provide some implications for engineering and technology foresight research, as well as for corporate strategy and technology policy.

Technology, design and dementia: an exploratory survey of developers.

PubMed

Jiancaro, Tizneem; Jaglal, Susan B; Mihailidis, Alex

2017-08-01

Despite worldwide surges in dementia, we still know relatively little about the design of home technologies that support this population. The purpose of this study was to investigate design considerations from the perspective of developers. Participants, including technical and clinical specialists, were recruited internationally and answered web-based survey questions comprising Likert-type responses with text entry options. Developers were queried on 23 technology acceptance characteristics and 24 design practices. In all, forty developers completed the survey. Concerning "technology acceptance", cost, learnability, self-confidence (during use) and usability were deemed very important. Concerning "design practice", developers overwhelmingly valued user-centred design (UCD). In terms of general assistive technology (AT) models, these were largely unknown by technical specialists compared to clinical specialists. Recommendations based on this study include incorporating "self-confidence" into design protocols; examining the implications of "usability" and UCD in this context; and considering empathy-based design approaches to suit a diverse user population. Moreover, clinical specialists have much to offer development teams, particularly concerning the use of conceptual AT models. Implications of rehabilitation Stipulate precise usability criteria. Consider "learnability" and "self-confidence" as technology adoption criteria. Recognize the important theoretical role that clinical specialists can fulfil concerning the use of design schemas. Acknowledge the diversity amongst users with dementia, potentially adopting techniques, such as designing for "extraordinary users".

Advanced Refrigerator/Freezer Technology Development. Technology Assessment

NASA Technical Reports Server (NTRS)

Gaseor, Thomas; Hunter, Rick; Hamill, Doris

1996-01-01

The NASA Lewis Research Center, through contract with Oceaneering Space Systems, is engaged in a project to develop advanced refrigerator/freezer (R/F) technologies for future Life and Biomedical Sciences space flight missions. The first phase of this project, a technology assessment, has been completed to identify the advanced R/F technologies needed and best suited to meet the requirements for the five R/F classifications specified by Life and Biomedical Science researchers. Additional objectives of the technology assessment were to rank those technologies based on benefit and risk, and to recommend technology development activities that can be accomplished within this project. This report presents the basis, the methodology, and results of the R/F technology assessment, along with technology development recommendations.

Development of 3D microwave imaging technology for damage assessment of concrete bridge.

DOT National Transportation Integrated Search

2003-11-01

An innovative microwave 3-dimensional (3D) sub-surface imaging technology is developed for : detecting and quantitatively assessing internal damage of concrete structures. This technology is : based on reconstruction of dielectric profile (image) of ...

Study on development system of increasing gearbox for high-performance wind-power generator

NASA Astrophysics Data System (ADS)

Xu, Hongbin; Yan, Kejun; Zhao, Junyu

2005-12-01

Based on the analysis of the development potentiality of wind-power generator and domestic manufacture of its key parts in China, an independent development system of the Increasing Gearbox for High-performance Wind-power Generator (IGHPWG) was introduced. The main elements of the system were studied, including the procedure design, design analysis system, manufacturing technology and detecting system, and the relative important technologies were analyzed such as mixed optimal joint transmission structure of the first planetary drive with two grade parallel axle drive based on equal strength, tooth root round cutting technology before milling hard tooth surface, high-precise tooth grinding technology, heat treatment optimal technology and complex surface technique, and rig test and detection technique of IGHPWG. The development conception was advanced the data share and quality assurance system through all the elements of the development system. The increasing Gearboxes for 600KW and 1MW Wind-power Generator have been successfully developed through the application of the development system.

Educational technologies in health sciences libraries: teaching technology skills.

PubMed

Hurst, Emily J

2014-01-01

As technology rapidly changes, libraries remain go-to points for education and technology skill development. In academic health sciences libraries, trends suggest librarians provide more training on technology topics than ever before. While education and training have always been roles for librarians, providing technology training on new mobile devices and emerging systems requires class creation and training capabilities that are new to many librarians. To appeal to their users, many health sciences librarians are interested in developing technology-based classes. This column explores the question: what skills are necessary for developing and teaching technology in an academic health sciences library setting?

Educational Technologies in Health Science Libraries: Teaching Technology Skills

PubMed Central

Hurst, Emily J.

2014-01-01

As technology rapidly changes, libraries remain go-to points for education and technology skill development. In academic health sciences libraries, trends suggest librarians provide more training on technology topics than ever before. While education and training have always been roles for librarians, providing technology training on new mobile devices and emerging systems requires class creation and training capabilities that are new to many. To appeal to their users, many health sciences librarians are interested in developing technology-based classes. This column explores the question: what skills are necessary for developing and teaching technology in an academic health sciences library setting? PMID:24528269

Web-Based Tools for Designing and Developing Teaching Materials for Integration of Information Technology into Instruction

ERIC Educational Resources Information Center

Chang, Kuo-En; Sung, Yao-Ting; Hou, Huei-Tse

2006-01-01

Educational software for teachers is an important, yet usually ignored, link for integrating information technology into classroom instruction. This study builds a web-based teaching material design and development system. The process in the system is divided into four stages, analysis, design, development, and practice. Eight junior high school…

Advanced technologies for genetically manipulating the silkworm Bombyx mori, a model Lepidopteran insect

PubMed Central

Xu, Hanfu; O'Brochta, David A.

2015-01-01

Genetic technologies based on transposon-mediated transgenesis along with several recently developed genome-editing technologies have become the preferred methods of choice for genetically manipulating many organisms. The silkworm, Bombyx mori, is a Lepidopteran insect of great economic importance because of its use in silk production and because it is a valuable model insect that has greatly enhanced our understanding of the biology of insects, including many agricultural pests. In the past 10 years, great advances have been achieved in the development of genetic technologies in B. mori, including transposon-based technologies that rely on piggyBac-mediated transgenesis and genome-editing technologies that rely on protein- or RNA-guided modification of chromosomes. The successful development and application of these technologies has not only facilitated a better understanding of B. mori and its use as a silk production system, but also provided valuable experiences that have contributed to the development of similar technologies in non-model insects. This review summarizes the technologies currently available for use in B. mori, their application to the study of gene function and their use in genetically modifying B. mori for biotechnology applications. The challenges, solutions and future prospects associated with the development and application of genetic technologies in B. mori are also discussed. PMID:26108630

Polymer Energy Rechargeable System (PERS) Development Program

NASA Technical Reports Server (NTRS)

Baldwin, Richard S.; Manzo, Michelle A.; Dalton, Penni J.; Marsh, Richard A.; Surampudi, Rao

2001-01-01

The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) have recently established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The overall objective of this development program, which is referred to as PERS, Polymer Energy Rechargeable System, is to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative will exploit both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases will focus on R&D activities to address the critical technical issues and challenges at the cell level.

Examining Music Teachers' Self-Confidence Levels in Using Information and Communication Technologies for Education Based on Measurable Variables

ERIC Educational Resources Information Center

Kilic, Deniz Beste Çevik

2017-01-01

Rapid developments and innovations in technology have impact on individuals. The use of technology for one's daily life has become a necessity; therefore, the development and popularization of Information and Communication Technologies (ICTs) is use as a tool for solving educational problems. Because educational technologies play a major role both…

Reflections on the Development of a Machine Vision Technology for the Forest Products

Treesearch

Richard W. Conners; D.Earl Kline; Philip A. Araman; Robert L. Brisbon

1992-01-01

The authors have approximately 25 years experience in developing machine vision technology for the forest products industry. Based on this experience this paper will attempt to realistically predict what the future holds for this technology. In particular, this paper will attempt to describe some of the benefits this technology will offer, describe how the technology...

A Study of Business Incubators: Models, Best Practices, and Recommendations for NASA and Florida

NASA Technical Reports Server (NTRS)

1997-01-01

This study was conducted to provide NASA-Kennedy Space Center with information and recommendations to support establishing one or more technology-based business incubators In Florida. The study involved assembling information about incubators: why they succeed, why they fail, how they are organized, and what services they provide. Consequently, this study focuses on widely-recognized "best practices," needed to establish successful technology- based business incubators. The findings are used to optimize the design and implementation of one or more technology-based business incubators to be established in Florida. Recommendations reflect both the essential characteristics of successful incubators and the optimal business demographics in Florida. Appendix A provides a fuller description of the objectives of the study. Technology-based business incubators are an increasing catalyst of new business development across the USi Incubators focus on providing entrepreneurs and small start-up firms with a wide array of support services necessary to bring forth new products and processes based on technologies developed in the nation's federal and private laboratories and universities. Appendix B provides extensive discussion of findings relative to technology- based business incubators.

Application of data mining in science and technology management information system based on WebGIS

NASA Astrophysics Data System (ADS)

Wu, Xiaofang; Xu, Zhiyong; Bao, Shitai; Chen, Feixiang

2009-10-01

With the rapid development of science and technology and the quick increase of information, a great deal of data is accumulated in the management department of science and technology. Usually, many knowledge and rules are contained and concealed in the data. Therefore, how to excavate and use the knowledge fully is very important in the management of science and technology. It will help to examine and approve the project of science and technology more scientifically and make the achievement transformed as the realistic productive forces easier. Therefore, the data mine technology will be researched and applied to the science and technology management information system to find and excavate the knowledge in the paper. According to analyzing the disadvantages of traditional science and technology management information system, the database technology, data mining and web geographic information systems (WebGIS) technology will be introduced to develop and construct the science and technology management information system based on WebGIS. The key problems are researched in detail such as data mining and statistical analysis. What's more, the prototype system is developed and validated based on the project data of National Natural Science Foundation Committee. The spatial data mining is done from the axis of time, space and other factors. Then the variety of knowledge and rules will be excavated by using data mining technology, which helps to provide an effective support for decisionmaking.

Ceramic Technology for Advanced Heat Engines Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-08-01

The Ceramic Technology for Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional researchmore » is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially.« less

Developing internet-based eHealth promotion programs: the Spiral Technology Action Research (STAR) model.

PubMed

Skinner, Harvey A; Maley, Oonagh; Norman, Cameron D

2006-10-01

Health education and health promotion have a tradition of using information and communication technology (ICT). In recent years, the rapid growth of the Internet has created innovative opportunities for Web-based health education and behavior change applications-termed eHealth promotion. However, many eHealth promotion applications are developed without an explicit model to guide the design, evaluation, and ongoing improvement of the program. The spiral technology action research (STAR) model was developed to address this need. The model comprises five cycles (listen, plan, do, study, act) that weave together technological development, community involvement, and continuous improvement. The model is illustrated by a case study describing the development of the Smoking Zine (www.SmokingZine.org), a youth smoking prevention and cessation Web site.

Nature of Technology: Implications for design, development, and enactment of technological tools in school science classrooms

NASA Astrophysics Data System (ADS)

Waight, Noemi; Abd-El-Khalick, Fouad

2012-12-01

This position paper provides a theory-based explanation informed by philosophy of technology (PoT) of the recurrent documented patterns often associated with attempts to enact technology-supported, inquiry-based approaches in precollege science classrooms. Understandings derived from the history of technological development in other domains (e.g. medicine, transportation, and warfare) reveal numerous parallels that help to explain these recurrent patterns. Historical analyses of major technologies reveal a conglomerate of factors that interact to produce benefits, as well as intended and unintended consequences. On a macro-scale, PoT facilitates understandings of how technologies interact and are impacted by individuals, society, institutions, economy, politics, and culture. At the micro-level, and most relevant to science education, PoT engages the inherent nature of technology along a number of key dimensions: role of culture and values, notions of technological progression, technology as part of systems, technological diffusion, technology as a fix, and the notions of expertise. Overall, the present analysis has implications for the design, development, implementation, and adoption of technological tools for use in precollege science education, and highlights the role of technology as both artifact and process.

Installation Restoration Program Records Search for Westover Air Force Base, Massachusetts.

DTIC Science & Technology

1982-04-01

Phase III (not part of this contract) consists of a technology base development study to support the development of project plans for controlling...determine the extent and magnitude of the contaminant migration. Phase III (not part of this contract) consists of a technology base development study to...number of vegetation studies have attempted to classify the potential climax vegetation within the region of Westover AFB (Braun, 1972; Kuchler, 1975

Teaching Statistics with Technology

ERIC Educational Resources Information Center

Prodromou, Theodosia

2015-01-01

The Technological Pedagogical Content Knowledge (TPACK) conceptual framework for teaching mathematics, developed by Mishra and Koehler (2006), emphasises the importance of developing integrated and interdependent understanding of three primary forms of knowledge: technology, pedagogy, and content. The TPACK conceptual framework is based upon the…

Aerospace Engineering Systems and the Advanced Design Technologies Testbed Experience

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

1999-01-01

Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: 1) Physics-based analysis tools for filling the design space database; 2) Distributed computational resources to reduce response time and cost; 3) Web-based technologies to relieve machine-dependence; and 4) Artificial intelligence technologies to accelerate processes and reduce process variability. The Advanced Design Technologies Testbed (ADTT) activity at NASA Ames Research Center was initiated to study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities are reported.

An Emerging Technology Curriculum. Education for Technology Employment Project. Final Report.

ERIC Educational Resources Information Center

Harms, Dan; And Others

Individualized, competency-based curriculum materials were developed for a course on Principles of Technology, Units 1-6. New and updated curriculum materials in Drafting and Electronics and the Principles of Technology units were pilot tested in area vocational center settings in Illinois. A computer maintenance program was also developed but not…

Integration of e-Management, e-Development and e-Learning Technologies for Blended Course Delivery

ERIC Educational Resources Information Center

Johnson, Lynn E.; Tang, Michael

2005-01-01

This paper describes and assesses a pre-engineering curriculum development project called Foundations of Engineering, Science and Technology (FEST). FEST integrates web-based technologies into an inter-connected system to enable delivery of a blended program at multiple institutions. Tools and systems described include 1) technologies to deliver…

The Implementation of Technology-Based SME Management Development Programmes

ERIC Educational Resources Information Center

Carr, James

2005-01-01

Learning technology is seen as one solution to the problem of delivering management training in Small and Medium-sized Enterprises (SMEs). This paper investigates how the Higher Education (HE) sector can use its growing expertise in learning technology implementation to develop effective SME management development solutions. It is found that there…

Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields

ERIC Educational Resources Information Center

Bilgin, Aysegül; Balbag, Mustafa Zafer

2016-01-01

This study has developed "Personal Professional Development Efforts Scale for Science and Technology Teachers Regarding Their Fields". Exploratory factor analysis of the scale has been conducted based on the data collected from 200 science and technology teachers across Turkey. The scale has been observed through varimax rotation method,…

48 CFR 231.205-18 - Independent research and development and bid and proposal costs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... development of technologies identified as critical under 10 U.S.C. 2522. (6) Increase the development and promotion of efficient and effective applications of dual-use technologies. (7) Provide efficient and... and life-cycle costs of military systems. (3) Strengthen the defense industrial and technology base of...

48 CFR 231.205-18 - Independent research and development and bid and proposal costs.

Code of Federal Regulations, 2013 CFR

2013-10-01

... development of technologies identified as critical under 10 U.S.C. 2522. (6) Increase the development and promotion of efficient and effective applications of dual-use technologies. (7) Provide efficient and... and life-cycle costs of military systems. (3) Strengthen the defense industrial and technology base of...

48 CFR 231.205-18 - Independent research and development and bid and proposal costs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... development of technologies identified as critical under 10 U.S.C. 2522. (6) Increase the development and promotion of efficient and effective applications of dual-use technologies. (7) Provide efficient and... and life-cycle costs of military systems. (3) Strengthen the defense industrial and technology base of...

48 CFR 231.205-18 - Independent research and development and bid and proposal costs.

Code of Federal Regulations, 2011 CFR

2011-10-01

... development of technologies identified as critical under 10 U.S.C. 2522. (6) Increase the development and promotion of efficient and effective applications of dual-use technologies. (7) Provide efficient and... and life-cycle costs of military systems. (3) Strengthen the defense industrial and technology base of...

48 CFR 231.205-18 - Independent research and development and bid and proposal costs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... development of technologies identified as critical under 10 U.S.C. 2522. (6) Increase the development and promotion of efficient and effective applications of dual-use technologies. (7) Provide efficient and... and life-cycle costs of military systems. (3) Strengthen the defense industrial and technology base of...

New technology continues to invade healthcare. What are the strategic implications/outcomes?

PubMed

Smith, Coy

2004-01-01

Healthcare technology continues to advance and be implemented in healthcare organizations. Nurse executives must strategically evaluate the effectiveness of each proposed system or device using a strategic planning process. Clinical information systems, computer-chip-based clinical monitoring devices, advanced Web-based applications with remote, wireless communication devices, clinical decision support software--all compete for capital and registered nurse salary dollars. The concept of clinical transformation is developed with new models of care delivery being supported by technology rather than driving care delivery. Senior nursing leadership's role in clinical transformation and healthcare technology implementation is developed. Proposed standards, expert group action, business and consumer groups, and legislation are reviewed as strategic drivers in the development of an electronic health record and healthcare technology. A matrix of advancing technology and strategic decision-making parameters are outlined.

Commercialization of Plasma-Assisted Technologies: The Indian Experience

NASA Astrophysics Data System (ADS)

John, P. I.

The paper describes an initiative by the Institute for Plasma Research (IPR), India in establishing links with the Indian industry for developing and commercialising advanced plasma-based industrial technologies. This has culminated in the creation of a self-financing technology development, incubation, demonstration and delivery facility. A business plan for converting the knowledge base to commercially viable technologies conceived technology as a product and the industry as the market and addressed issues like resistance to new technologies, the key role of entrepreneur, thrust areas and the necessity of technology incubation and delivery. Success of this strategy is discussed in a few case studies. We conclude by identifying the cost, environmental, strategic and techno-economic aspects, which would be the prime drivers for plasma-assisted manufacturing technology in India.

For the Teacher and by the Teacher: Development of Exemplar Technology Learning Activities in Taiwan.

ERIC Educational Resources Information Center

Lee, Lung-Sheng Steven

In Taiwan, revised curriculum standards for junior and senior high school technology education were developed to take effect in the 1997 and 1998 school years. A project was undertaken to develop a set of exemplar technology learning activities (TLAs) to assist teachers in developing their school-based course of study for the living technology…

Users perspectives on interactive distance technology enabling home-based motor training for stroke patients.

PubMed

Ehn, Maria; Hansson, Pär; Sjölinder, Marie; Boman, Inga-Lill; Folke, Mia; Sommerfeld, Disa; Borg, Jörgen; Palmcrantz, Susanne

2015-01-01

The aim of this work has been to develop a technical support enabling home-based motor training after stroke. The basis for the work plan has been to develop an interactive technical solution supporting three different groups of stroke patients: (1) patients with stroke discharged from hospital with support from neuro team; (2) patients with stroke whose support from neuro team will be phased out and (3) patients living with impaired motor functions long-term. The technology has been developed in close collaboration with end-users using a method earlier evaluated and described [12]. This paper describes the main functions of the developed technology. Further, results from early user-tests with end-users, performed to identify needs for improvements to be carried out during further technical development. The developed technology will be tested further in a pilot study of the safety and, usefulness of the technology when applied as a support for motor training in three different phases of the post-stroke rehabilitation process.

A multimedia adult literacy program: Combining NASA technology, instructional design theory, and authentic literacy concepts

NASA Technical Reports Server (NTRS)

Willis, Jerry W.

1993-01-01

For a number of years, the Software Technology Branch of the Information Systems Directorate has been involved in the application of cutting edge hardware and software technologies to instructional tasks related to NASA projects. The branch has developed intelligent computer aided training shells, instructional applications of virtual reality and multimedia, and computer-based instructional packages that use fuzzy logic for both instructional and diagnostic decision making. One outcome of the work on space-related technology-supported instruction has been the creation of a significant pool of human talent in the branch with current expertise on the cutting edges of instructional technologies. When the human talent is combined with advanced technologies for graphics, sound, video, CD-ROM, and high speed computing, the result is a powerful research and development group that both contributes to the applied foundations of instructional technology and creates effective instructional packages that take advantage of a range of advanced technologies. Several branch projects are currently underway that combine NASA-developed expertise to significant instructional problems in public education. The branch, for example, has developed intelligent computer aided software to help high school students learn physics and staff are currently working on a project to produce educational software for young children with language deficits. This report deals with another project, the adult literacy tutor. Unfortunately, while there are a number of computer-based instructional packages available for adult literacy instruction, most of them are based on the same instructional models that failed these students when they were in school. The teacher-centered, discrete skill and drill-oriented, instructional strategies, even when they are supported by color computer graphics and animation, that form the foundation for most of the computer-based literacy packages currently on the market may not be the most effective or most desirable way to use computer technology in literacy programs. This project is developing a series of instructional packages that are based on a different instructional model - authentic instruction. The instructional development model used to create these packages is also different. Instead of using the traditional five stage linear, sequential model based on behavioral learning theory, the project uses the recursive, reflective design and development model (R2D2) that is based on cognitive learning theory, particularly the social constructivism of Vygotsky, and an epistemology based on critical theory. Using alternative instructional and instructional development theories, the result of the summer faculty fellowship is LiteraCity, a multimedia adult literacy instructional package that is a simulation of finding and applying for a job. The program, which is about 120 megabytes, is distributed on CD-ROM.

SigmaCLIPSE = presentation management + NASA CLI PS + SQL

NASA Technical Reports Server (NTRS)

Weiss, Bernard P., Jr.

1990-01-01

SigmaCLIPSE provides an expert systems and 'intelligent' data base development program for diverse systems integration environments that require support for automated reasoning and expert systems technology, presentation management, and access to 'intelligent' SQL data bases. The SigmaCLIPSE technology and and its integrated ability to access 4th generation application development and decision support tools through a portable SQL interface, comprises a sophisticated software development environment for solving knowledge engineering and expert systems development problems in information intensive commercial environments -- financial services, health care, and distributed process control -- where the expert system must be extendable -- a major architectural advantage of NASA CLIPS. SigmaCLIPSE is a research effort intended to test the viability of merging SQL data bases with expert systems technology.

Applying systems engineering methodologies to the micro- and nanoscale realm

NASA Astrophysics Data System (ADS)

Garrison Darrin, M. Ann

2012-06-01

Micro scale and nano scale technology developments have the potential to revolutionize smart and small systems. The application of systems engineering methodologies that integrate standalone, small-scale technologies and interface them with macro technologies to build useful systems is critical to realizing the potential of these technologies. This paper covers the expanding knowledge base on systems engineering principles for micro and nano technology integration starting with a discussion of the drivers for applying a systems approach. Technology development on the micro and nano scale has transition from laboratory curiosity to the realization of products in the health, automotive, aerospace, communication, and numerous other arenas. This paper focuses on the maturity (or lack thereof) of the field of nanosystems which is emerging in a third generation having transitioned from completing active structures to creating systems. The emphasis of applying a systems approach focuses on successful technology development based on the lack of maturity of current nano scale systems. Therefore the discussion includes details relating to enabling roles such as product systems engineering and technology development. Classical roles such as acquisition systems engineering are not covered. The results are also targeted towards small-scale technology developers who need to take into account systems engineering processes such as requirements definition, verification, and validation interface management and risk management in the concept phase of technology development to maximize the likelihood of success, cost effective micro and nano technology to increase the capability of emerging deployed systems and long-term growth and profits.

Research and technology, fiscal year 1982

NASA Technical Reports Server (NTRS)

1982-01-01

Advanced studies are reviewed. Atmospheric sciences, magnetospheric physics, solar physics, gravitational physics, astronomy, and materials processing in space comprise the research programs. Large space systems, propulsion technology, materials and processes, electrical/electronic systems, data bases/design criteria, and facilities development comprise the technology development activities.

Technologies and Reformed-Based Science Instruction: The Examination of a Professional Development Model Focused on Supporting Science Teaching and Learning with Technologies

NASA Astrophysics Data System (ADS)

Campbell, Todd; Longhurst, Max L.; Wang, Shiang-Kwei; Hsu, Hui-Yin; Coster, Dan C.

2015-10-01

While access to computers, other technologies, and cyber-enabled resources that could be leveraged for enhancing student learning in science is increasing, generally it has been found that teachers use technology more for administrative purposes or to support traditional instruction. This use of technology, especially to support traditional instruction, sits in opposition to most recent standards documents in science education that call for student involvement in evidence-based sense-making activities. Many see technology as a potentially powerful resource that is reshaping society and has the potential to do the same in science classrooms. To consider the promise of technology in science classrooms, this research investigated the impact of a professional development project focused on enhancing teacher and student learning by using information and communication technologies (ICTs) for engaging students in reformed-based instruction. More specifically, these findings revealed positive teacher outcomes with respect to reformed-based and technology-supported instruction and increased ICT and new literacies skills. When considering students, the findings revealed positive outcomes with respect to ICT and new literacies skills and student achievement in science.

Development of Contemporary Problem-Based Learning Projects in Particle Technology

ERIC Educational Resources Information Center

Harris, Andrew T.

2009-01-01

The University of Sydney has offered an undergraduate course in particle technology using a contemporary problem based learning (PBL) methodology since 2005. Student learning is developed through the solution of complex, open-ended problems drawn from modern chemical engineering practice. Two examples are presented; i) zero emission electricity…

A New Direction for Technology-Based Economic Development: The Role of Innovation Intermediaries

ERIC Educational Resources Information Center

Bendis, Richard A.; Seline, Richard S.; Byler, Ethan J.

2008-01-01

Accelerating innovation to drive economic growth is the foremost goal for technology-based economic development organizations today. Realizing this goal through programmes is challenged by limited and outdated operating models. The authors outline their 21st Century Innovation Intermediary model, which pairs commercialization with regional…

Application of World Wide Web (W3) Technologies in Payload Operations

NASA Technical Reports Server (NTRS)

Sun, Charles; Windrem, May; Picinich, Lou

1996-01-01

World Wide Web (W3) technologies are considered in relation to their application to space missions. It is considered that such technologies, including the hypertext transfer protocol and the Java object-oriented language, offer a powerful and relatively inexpensive framework for distributed application software development. The suitability of these technologies for payload monitoring systems development is discussed, and the experience gained from the development of an insect habitat monitoring system based on W3 technologies is reported.

Further advances in autostereoscopic technology at Dimension Technologies Inc.

NASA Astrophysics Data System (ADS)

Eichenlaub, Jesse B.

1992-06-01

Dimension Technologies is currently one of three companies offering autostereoscopic displays for sale and one of several which are actively pursuing advances to the technology. We have devised a new autostereoscopic imaging technique which possesses several advantages over previously explored methods. We are currently manufacturing autostereoscopic displays based on this technology, as well as vigorously pursuing research and development toward more advanced displays. During the past year, DTI has made major strides in advancing its LCD based autostereoscopic display technology. DTI has developed a color product -- a stand alone 640 X 480 flat panel LCD based 3-D display capable of accepting input from IBM PC and Apple MAC computers or TV cameras, and capable of changing from 3-D mode to 2-D mode with the flip of a switch. DTI is working on development of a prototype second generation color product that will provide autostereoscopic 3-D while allowing each eye to see the full resolution of the liquid crystal display. And development is also underway on a proof-of-concept display which produces hologram-like look-around images visible from a wide viewing angle, again while allowing the observer to see the full resolution of the display from all locations. Development of a high resolution prototype display of this type has begun.

Enabling technologies for fiber optic sensing

NASA Astrophysics Data System (ADS)

Ibrahim, Selwan K.; Farnan, Martin; Karabacak, Devrez M.; Singer, Johannes M.

2016-04-01

In order for fiber optic sensors to compete with electrical sensors, several critical parameters need to be addressed such as performance, cost, size, reliability, etc. Relying on technologies developed in different industrial sectors helps to achieve this goal in a more efficient and cost effective way. FAZ Technology has developed a tunable laser based optical interrogator based on technologies developed in the telecommunication sector and optical transducer/sensors based on components sourced from the automotive market. Combining Fiber Bragg Grating (FBG) sensing technology with the above, high speed, high precision, reliable quasi distributed optical sensing systems for temperature, pressure, acoustics, acceleration, etc. has been developed. Careful design needs to be considered to filter out any sources of measurement drifts/errors due to different effects e.g. polarization and birefringence, coating imperfections, sensor packaging etc. Also to achieve high speed and high performance optical sensing systems, combining and synchronizing multiple optical interrogators similar to what has been used with computer/processors to deliver super computing power is an attractive solution. This path can be achieved by using photonic integrated circuit (PIC) technology which opens the doors to scaling up and delivering powerful optical sensing systems in an efficient and cost effective way.

Research on robotics by principal investigators of the Robotics Technology Development Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harrigan, R.W.

The U.S. Department of Energy`s Office of Technology Development has been developing robotics and automation technologies for the clean-up and handling of hazardous and radioactive waste through one of its major elements, Cross Cutting and Advanced Technology development. CC&AT university research and development programs recognize the strong technology, base resident in the university community and sponsor a focused technology research and development program which stresses close interaction between the university sector and the DOE community. This report contains a compilation of research articles by each of 14 principle investigators supported by CC&AT to develop robotics and automation technologies for themore » clean-up and handling of hazardous and radioactive waste. This research has led to innovative solutions for waste clean-up problems, and it has moved technology out of university laboratories into functioning systems which has allowed early evaluation by site technologists.« less

Evaluating the Potential of Teacher-Designed Technology-Based Tasks for Meaningful Learning: Identifying Needs for Professional Development

ERIC Educational Resources Information Center

George, Ann; Sanders, Martie

2017-01-01

With technology increasingly being introduced into classrooms worldwide, stakeholders are asking whether ICT provides educational value. It is not simply having access to technology but how teachers use it that will determine its worth to education. Thirty-three teacher-designed technology-based tasks from eight subject areas were analysed for…

Technology, Demographic Characteristics and E-Learning Acceptance: A Conceptual Model Based on Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Tarhini, Ali; Elyas, Tariq; Akour, Mohammad Ali; Al-Salti, Zahran

2016-01-01

The main aim of this paper is to develop an amalgamated conceptual model of technology acceptance that explains how individual, social, cultural and organizational factors affect the students' acceptance and usage behaviour of the Web-based learning systems. More specifically, the proposed model extends the Technology Acceptance Model (TAM) to…

Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

2012-01-01

Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

Integrating Technology and Pedagogy for Inquiry-Based Learning: The Stanford Mobile Inquiry-Based Learning Environment (SMILE)

ERIC Educational Resources Information Center

Buckner, Elizabeth; Kim, Paul

2014-01-01

Despite the long-standing interest in educational technology reforms, many researchers have found that it is difficult to incorporate advanced information and communications technologies (ICT) in classrooms. Many ICT projects, particularly in the developing world, are limited by the lack of integration between pedagogy and technology. This article…

Research and development of LANDSAT-based crop inventory techniques

NASA Technical Reports Server (NTRS)

Horvath, R.; Cicone, R. C.; Malila, W. A. (Principal Investigator)

1982-01-01

A wide spectrum of technology pertaining to the inventory of crops using LANDSAT without in situ training data is addressed. Methods considered include Bayesian based through-the-season methods, estimation technology based on analytical profile fitting methods, and expert-based computer aided methods. Although the research was conducted using U.S. data, the adaptation of the technology to the Southern Hemisphere, especially Argentina was considered.

Law of Large Numbers: The Theory, Applications and Technology-Based Education

ERIC Educational Resources Information Center

Dinov, Ivo D.; Christou, Nicolas; Gould, Robert

2009-01-01

Modern approaches for technology-based blended education utilize a variety of recently developed novel pedagogical, computational and network resources. Such attempts employ technology to deliver integrated, dynamically-linked, interactive-content and heterogeneous learning environments, which may improve student comprehension and information…

Integration of problem-based learning and innovative technology into a self-care course.

PubMed

McFalls, Marsha

2013-08-12

To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

Technology-Supported Change: A Staff Development Opportunity.

ERIC Educational Resources Information Center

Bradshaw, Lynn K.

1997-01-01

Implementing technology in a classroom is a personal process that varies from teacher to teacher. The Concerns-Based Adoption Model identifies seven stages of concern that teachers may experience, from awareness to refocusing ideas. Innovative staff development strategies include establishing organizational structures to support technological and…

The provision of feedback through computer-based technology to promote self-managed post-stroke rehabilitation in the home.

PubMed

Parker, Jack; Mawson, Susan; Mountain, Gail; Nasr, Nasrin; Davies, Richard; Zheng, Huiru

2014-11-01

Building on previous research findings, this article describes the development of the feedback interfaces for a Personalised Self-Managed Rehabilitation System (PSMrS) for home-based post-stroke rehabilitation using computer-based technology. Embedded within a realistic evaluative methodological approach, the development of the feedback interfaces for the PSMrS involved the incorporation of existing and emerging theories and a hybrid of health and social sciences research and user-centred design methods. User testing confirmed that extrinsic feedback for home-based post-stroke rehabilitation through computer-based technology needs to be personalisable, accurate, rewarding and measurable. In addition, user testing also confirmed the feasibility of using specific components of the PSMrS. A number of key elements are crucial for the development and potential utilisation of technology in what is an inevitable shift towards the use of innovative methods of delivering post-stroke rehabilitation. This includes the specific elements that are essential for the promotion of self-managed rehabilitation and rehabilitative behaviour change; the impact of the context on the mechanisms; and, importantly, the need for reliability and accuracy of the technology.

A Survey on Gas Sensing Technology

PubMed Central

Liu, Xiao; Cheng, Sitian; Liu, Hong; Hu, Sha; Zhang, Daqiang; Ning, Huansheng

2012-01-01

Sensing technology has been widely investigated and utilized for gas detection. Due to the different applicability and inherent limitations of different gas sensing technologies, researchers have been working on different scenarios with enhanced gas sensor calibration. This paper reviews the descriptions, evaluation, comparison and recent developments in existing gas sensing technologies. A classification of sensing technologies is given, based on the variation of electrical and other properties. Detailed introduction to sensing methods based on electrical variation is discussed through further classification according to sensing materials, including metal oxide semiconductors, polymers, carbon nanotubes, and moisture absorbing materials. Methods based on other kinds of variations such as optical, calorimetric, acoustic and gas-chromatographic, are presented in a general way. Several suggestions related to future development are also discussed. Furthermore, this paper focuses on sensitivity and selectivity for performance indicators to compare different sensing technologies, analyzes the factors that influence these two indicators, and lists several corresponding improved approaches. PMID:23012563

Replicated x-ray optics for space applications

NASA Astrophysics Data System (ADS)

Hudec, René; Pína, Ladislav; Inneman, Adolf

2017-11-01

We report on the program of design and development of X-ray optics for space applications in the Czech Republic. Having more than 30 years background in X-ray optics development for space applications (for use in astronomical X-ray telescopes onboard spacecrafts, before 1989 mostly for Soviet and East European INTERKOSMOS program), we focus nowadays on novel technologies and approaches, thin shell replicated mirrors, as well as studies of light-weight mirrors based on innovative materials such as ceramics. The collaboration includes teams from the Academy of Sciences, Universities, and industry. We will describe and discuss both the history of the development of Xray optics in the Czech Republic and the developed technologies and approaches (with focus on replication technology) as well as recent activities and developments including our participation on the ESA XEUS mirror technology development based on the Agreement between ESA and Czech Government.

Technology-Based Communication and the Development of Interpersonal Competencies Within Adolescent Romantic Relationships: A Preliminary Investigation

PubMed Central

Nesi, Jacqueline; Widman, Laura; Choukas-Bradley, Sophia; Prinstein, Mitchell J.

2018-01-01

This study investigated longitudinal associations between adolescents’ technology-based communication and the development of interpersonal competencies within romantic relationships. A school-based sample of 487 adolescents (58% girls; Mage = 14.1) participated at two time points, one year apart. Participants reported (1) proportions of daily communication with romantic partners via traditional modes (in person, on the phone) versus technological modes (text messaging, social networking sites) and (2) competence in the romantic relationship skill domains of negative assertion and conflict management. Results of cross-lagged panel models indicated that adolescents who engaged in greater proportions of technology-based communication with romantic partners reported lower levels of interpersonal competencies one year later, but not vice versa; associations were particularly strong for boys. PMID:28876524

Aerospace Engineering Systems

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

1999-01-01

Continuous improvement of aerospace product development processes is a driving requirement across much of the aerospace community. As up to 90% of the cost of an aerospace product is committed during the first 10% of the development cycle, there is a strong emphasis on capturing, creating, and communicating better information (both requirements and performance) early in the product development process. The community has responded by pursuing the development of computer-based systems designed to enhance the decision-making capabilities of product development individuals and teams. Recently, the historical foci on sharing the geometrical representation and on configuration management are being augmented: Physics-based analysis tools for filling the design space database; Distributed computational resources to reduce response time and cost; Web-based technologies to relieve machine-dependence; and Artificial intelligence technologies to accelerate processes and reduce process variability. Activities such as the Advanced Design Technologies Testbed (ADTT) project at NASA Ames Research Center study the strengths and weaknesses of the technologies supporting each of these trends, as well as the overall impact of the combination of these trends on a product development event. Lessons learned and recommendations for future activities will be reported.

Research on Network Defense Strategy Based on Honey Pot Technology

NASA Astrophysics Data System (ADS)

Hong, Jianchao; Hua, Ying

2018-03-01

As a new network security technology of active defense, The honeypot technology has become a very effective and practical method of decoy attackers. The thesis discusses the theory, structure, characteristic, design and implementation of Honeypot in detail. Aiming at the development of means of attack, put forward a kind of network defense technology based on honeypot technology, constructing a virtual Honeypot demonstrate the honeypot’s functions.

A Proposal to Develop Interactive Classification Technology

NASA Technical Reports Server (NTRS)

deBessonet, Cary

1998-01-01

Research for the first year was oriented towards: 1) the design of an interactive classification tool (ICT); and 2) the development of an appropriate theory of inference for use in ICT technology. The general objective was to develop a theory of classification that could accommodate a diverse array of objects, including events and their constituent objects. Throughout this report, the term "object" is to be interpreted in a broad sense to cover any kind of object, including living beings, non-living physical things, events, even ideas and concepts. The idea was to produce a theory that could serve as the uniting fabric of a base technology capable of being implemented in a variety of automated systems. The decision was made to employ two technologies under development by the principal investigator, namely, SMS (Symbolic Manipulation System) and SL (Symbolic Language) [see debessonet, 1991, for detailed descriptions of SMS and SL]. The plan was to enhance and modify these technologies for use in an ICT environment. As a means of giving focus and direction to the proposed research, the investigators decided to design an interactive, classificatory tool for use in building accessible knowledge bases for selected domains. Accordingly, the proposed research was divisible into tasks that included: 1) the design of technology for classifying domain objects and for building knowledge bases from the results automatically; 2) the development of a scheme of inference capable of drawing upon previously processed classificatory schemes and knowledge bases; and 3) the design of a query/ search module for accessing the knowledge bases built by the inclusive system. The interactive tool for classifying domain objects was to be designed initially for textual corpora with a view to having the technology eventually be used in robots to build sentential knowledge bases that would be supported by inference engines specially designed for the natural or man-made environments in which the robots would be called upon to operate.

Streaming Media Technology: Laying the Foundations for Educational Change.

ERIC Educational Resources Information Center

Sircar, Jayanta

2000-01-01

Discussion of the delivery of multimedia using streaming technology focuses on its use in engineering education. Highlights include engineering education and instructional technology, including learning approaches based on cognitive development; differences between local and distance education; economic factors; and roles of Web-based streaming,…

E-Mentoring: Enhancing Special Education Teacher Induction

ERIC Educational Resources Information Center

Smith, Sean J.; Israel, Maya

2010-01-01

Teaching in 21st-century schools cannot easily be separated from technology-based solutions. Instead, technology is increasingly becoming an essential tool for any teacher's toolbox, especially the new teacher who is often considered a digital native. In teacher education and professional development, technology-based learning, or…

Empowering People through Technology. Proceedings of the International Conference of the Association for the Development of Computer-Based Instructional Systems (34th, Norfolk, Virginia, November 8-11, 1992).

ERIC Educational Resources Information Center

Association for the Development of Computer-based Instructional Systems.

These proceedings present 74 selected abstracts and 47 selected formal papers under 14 special interest group headings. Topics addressed by the papers include constructing multimedia; interactive video; computers in secondary school mathematics; access in computer-based instruction; implementing computer-based technology; advisor development;…

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

NASA Astrophysics Data System (ADS)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision-makers with the ability to assess or measure the robustness of program requirements against such uncertainties. A literature review of techniques for forecasting technology performance and development uncertainties and subsequent impacts on capability, budget, and schedule requirements resulted in the conclusion that an analysis process that coupled a probabilistic analysis technique such as Monte Carlo Simulations with quantitative and parametric models of technology performance impact and technology development time and cost requirements would allow the probabilities of meeting specific constraints of these requirements to be established. These probabilities of requirements success metrics can then be used as a quantitative and probabilistic measure of program requirements robustness against technology uncertainties. Combined with a Multi-Objective Genetic Algorithm optimization process and computer-based Decision Support System, critical information regarding requirements robustness against technology uncertainties can be captured and quantified for acquisition decision-makers. This results in a more informed and justifiable selection of program technologies during initial program definition as well as formulation of program development and risk management strategies. To meet the stated research objective, the ENhanced TEchnology Robustness Prediction and RISk Evaluation (ENTERPRISE) methodology was formulated to provide a structured and transparent process for integrating these enabling techniques to provide a probabilistic and quantitative assessment of acquisition program requirements robustness against technology performance and development uncertainties. In order to demonstrate the capabilities of the ENTERPRISE method and test the research Hypotheses, an demonstration application of this method was performed on a notional program for acquiring the Carrier-based Suppression of Enemy Air Defenses (SEAD) using Unmanned Combat Aircraft Systems (UCAS) and their enabling technologies. The results of this implementation provided valuable insights regarding the benefits and inner workings of this methodology as well as its limitations that should be addressed in the future to narrow the gap between current state and the desired state.

Web-based learning in professional development: experiences of Finnish nurse managers.

PubMed

Korhonen, Teija; Lammintakanen, Johanna

2005-11-01

The aim of this article is to describe the nurse managers' expectations, attitudes and experiences on web-based learning before and after participation in a web-based course. Information technology has rapidly become more common in health care settings. However, little is known about nurse managers' experiences on web-based learning, although they have a crucial role in promoting the professional development of their staff. Diagnostic assignments (n = 18) written before and interviews (n = 8) taken after the web-based education. The data were analysed by inductive content analysis. Nurse managers found web-based education to be a suitable and modern method of learning. On the basis of their experience they found multiple ways to utilize web-based learning environments in health care. Information technology skills, equipment, support and time were considered essential in web-based learning. Additionally, they found that their own experience might lead to more widespread implementation of web-based learning in health care settings. Information technology skills of nurse managers and staff need to be developed in order to use information technology effectively. In order to learn in a web-based environment, everyone needs the opportunity and access to required resources. Additionally, nurse managers' own experiences are important to promote wider utilization of web-based learning.

Navigating the Rapids: The Development of Regulated Next-Generation Sequencing-Based Clinical Trial Assays and Companion Diagnostics

PubMed Central

Pant, Saumya; Weiner, Russell; Marton, Matthew J.

2014-01-01

Over the past decade, next-generation sequencing (NGS) technology has experienced meteoric growth in the aspects of platform, technology, and supporting bioinformatics development allowing its widespread and rapid uptake in research settings. More recently, NGS-based genomic data have been exploited to better understand disease development and patient characteristics that influence response to a given therapeutic intervention. Cancer, as a disease characterized by and driven by the tumor genetic landscape, is particularly amenable to NGS-based diagnostic (Dx) approaches. NGS-based technologies are particularly well suited to studying cancer disease development, progression and emergence of resistance, all key factors in the development of next-generation cancer Dxs. Yet, to achieve the promise of NGS-based patient treatment, drug developers will need to overcome a number of operational, technical, regulatory, and strategic challenges. Here, we provide a succinct overview of the state of the clinical NGS field in terms of the available clinically targeted platforms and sequencing technologies. We discuss the various operational and practical aspects of clinical NGS testing that will facilitate or limit the uptake of such assays in routine clinical care. We examine the current strategies for analytical validation and Food and Drug Administration (FDA)-approval of NGS-based assays and ongoing efforts to standardize clinical NGS and build quality control standards for the same. The rapidly evolving companion diagnostic (CDx) landscape for NGS-based assays will be reviewed, highlighting the key areas of concern and suggesting strategies to mitigate risk. The review will conclude with a series of strategic questions that face drug developers and a discussion of the likely future course of NGS-based CDx development efforts. PMID:24860780

Current State and Model for Development of Technology-Based Care for Attention Deficit Hyperactivity Disorder.

PubMed

Benyakorn, Songpoom; Riley, Steven J; Calub, Catrina A; Schweitzer, Julie B

2016-09-01

Care (i.e., evaluation and intervention) delivered through technology is used in many areas of mental health services, including for persons with attention deficit hyperactivity disorder (ADHD). Technology can facilitate care for individuals with ADHD, their parents, and their care providers. The adoption of technological tools for ADHD care requires evidence-based studies to support the transition from development to integration into use in the home, school, or work for persons with the disorder. The initial phase, which is development of technological tools, has begun in earnest; however, the evidence base for many of these tools is lacking. In some instances, the uptake of a piece of technology into home use or clinical practice may be further along than the research to support its use. In this study, we review the current evidence regarding technology for ADHD and also propose a model to evaluate the support for other tools that have yet to be tested. We propose using the Research Domain Criteria as a framework for evaluating the tools' relationships to dimensions related to ADHD. This article concludes with recommendations for testing new tools that may have promise in improving the evaluation or treatment of persons with ADHD.

GIS Based Application of Advanced Traveler Information System in India

NASA Astrophysics Data System (ADS)

Kumar, P.; Singh, V.

2012-02-01

Developed countries like USA, Canada, Japan, UK, Australia and Germany have adopted advanced traveler information technologies expeditiously in comparison to developing countries. But, unlike developed countries, developing countries face considerable financial and framework constraints. Moreover local traffic, roadway, signalization, demographic, topological and social conditions in developing countries are quite different from those in developed countries. In this paper, a comprehensive framework comprising of system architecture, development methodology and salient features of a developed Advanced Traveler Information System (ATIS) for metropolitan cities in developing countries has been discussed. Development of proposed system is based on integration of two well known information technologies viz. Geographic Information Systems (GIS) and World Wide Web (WWW). Combination of these technologies can be utilized to develop an integrated ATIS that targets different types of travelers like private vehicle owners, transit users and casual outside visitors.

Application of Technology to Cognitive Development.

ERIC Educational Resources Information Center

Wilson, Louise

This report presents a summary of research being conducted at the University of Minnesota in which new technologies are being applied to development of cognition in hearing impaired learners. The study involved an application of concept analysis, information-processing theories, and group-based interactive technology in the teaching of…

Technology, Innovation, and Regional Economic Development.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

In recent years state and local governments, universities, and private sector groups have become increasingly active in promoting technological innovation and technology-based business development in their local economies. These efforts have resulted in productive new forms of partnership and cooperation at all levels. While federal programs have…

Pre-Service Teachers' Perceptions on Development of Their IMD Competencies through TPACK-Based Activities

ERIC Educational Resources Information Center

Tokmak, Hatice Sancar; Yelken, Tugba Yanpar; Konokman, Gamze Yavuz

2013-01-01

The current study investigated perceived development of pre-service teachers in their Instructional Material Design (IMD) competencies through the course "Instructional Technology and Material Design," which is based on a technological, pedagogical, and content knowledge (TPACK) framework. A total of 22 Elementary Education pre-service…

Technology for School-Based Assessment and Assessment for Learning: Development Principles from New Zealand

ERIC Educational Resources Information Center

Hattie, John A. C.; Brown, Gavin T. L.

2008-01-01

National assessment systems can be enhanced with effective school-based assessment (SBA) that allows teachers to focus on improvement decisions. Modern computer-assisted technology systems are often used to deploy SBA systems. Since 2000, New Zealand has researched, developed, and deployed a national, computer-assisted SBA system. Eight major…

Developing a Strategy for Using Technology-Enhanced Items in Large-Scale Standardized Tests

ERIC Educational Resources Information Center

Bryant, William

2017-01-01

As large-scale standardized tests move from paper-based to computer-based delivery, opportunities arise for test developers to make use of items beyond traditional selected and constructed response types. Technology-enhanced items (TEIs) have the potential to provide advantages over conventional items, including broadening construct measurement,…

A New Mirror for the Classroom: A Technology-Based Tool for Documenting the Impact of Technology on Instruction.

ERIC Educational Resources Information Center

Gearhart, Maryl; And Others

One of the new measures developed as part of the Apple Classrooms of Tomorrow (ACOT) program is described. The ACOT project examines the impact of access to educational technology on the kindergarten through grade 12 classroom environments. The new measure is a technology-based classroom observation instrument for documenting the impact of…

Entropy and Gravity Concepts as New Methodological Indexes to Investigate Technological Convergence: Patent Network-Based Approach

PubMed Central

Cho, Yongrae; Kim, Minsung

2014-01-01

The volatility and uncertainty in the process of technological developments are growing faster than ever due to rapid technological innovations. Such phenomena result in integration among disparate technology fields. At this point, it is a critical research issue to understand the different roles and the propensity of each element technology for technological convergence. In particular, the network-based approach provides a holistic view in terms of technological linkage structures. Furthermore, the development of new indicators based on network visualization can reveal the dynamic patterns among disparate technologies in the process of technological convergence and provide insights for future technological developments. This research attempts to analyze and discover the patterns of the international patent classification codes of the United States Patent and Trademark Office's patent data in printed electronics, which is a representative technology in the technological convergence process. To this end, we apply the physical idea as a new methodological approach to interpret technological convergence. More specifically, the concepts of entropy and gravity are applied to measure the activities among patent citations and the binding forces among heterogeneous technologies during technological convergence. By applying the entropy and gravity indexes, we could distinguish the characteristic role of each technology in printed electronics. At the technological convergence stage, each technology exhibits idiosyncratic dynamics which tend to decrease technological differences and heterogeneity. Furthermore, through nonlinear regression analysis, we have found the decreasing patterns of disparity over a given total period in the evolution of technological convergence. This research has discovered the specific role of each element technology field and has consequently identified the co-evolutionary patterns of technological convergence. These new findings on the evolutionary patterns of technological convergence provide some implications for engineering and technology foresight research, as well as for corporate strategy and technology policy. PMID:24914959

VLBI Technology Development at SHAO

NASA Technical Reports Server (NTRS)

Zhang, Xiuzhong; Shu, Fengchun; Xiang, Ying; Zhu, Renjie; Xu, Zhijun; Chen, Zhong; Zheng, Weimin; Luo, Jintao; Wu, Yajun

2010-01-01

VLBI technology development made significant progress at SHAO in the last few years. The development status of the Chinese DBBC, the software and FPGA-based correlators, and the new VLBI antenna, as well as VLBI applications are summarized in this paper.

Advancement of CMOS Doping Technology in an External Development Framework

NASA Astrophysics Data System (ADS)

Jain, Amitabh; Chambers, James J.; Shaw, Judy B.

2011-01-01

The consumer appetite for a rich multimedia experience drives technology development for mobile hand-held devices and the infrastructure to support them. Enhancements in functionality, speed, and user experience are derived from advancements in CMOS technology. The technical challenges in developing each successive CMOS technology node to support these enhancements have become increasingly difficult. These trends have motivated the CMOS business towards a collaborative approach based on strategic partnerships. This paper describes our model and experience of CMOS development, based on multi-dimensional industrial and academic partnerships. We provide to our process equipment, materials, and simulation partners, as well as to our silicon foundry partners, the detailed requirements for future integrated circuit products. This is done very early in the development cycle to ensure that these requirements can be met. In order to determine these fundamental requirements, we rely on a strategy that requires strong interaction between process and device simulation, physical and chemical analytical methods, and research at academic institutions. This learning is shared with each project partner to address integration and manufacturing issues encountered during CMOS technology development from its inception through product ramp. We utilize TI's core strengths in physical analysis, unit processes and integration, yield ramp, reliability, and product engineering to support this technological development. Finally, this paper presents examples of the advancement of CMOS doping technology for the 28 nm node and beyond through this development model.

Technology-based suicide prevention: current applications and future directions.

PubMed

Luxton, David D; June, Jennifer D; Kinn, Julie T

2011-01-01

This review reports on current and emerging technologies for suicide prevention. Technology-based programs discussed include interactive educational and social networking Web sites, e-mail outreach, and programs that use mobile devices and texting. We describe innovative applications such as virtual worlds, gaming, and text analysis that are currently being developed and applied to suicide prevention and outreach programs. We also discuss the benefits and limitations of technology-based applications and discuss future directions for their use.

Commercial involvement in the development of space-based plant growing technology

NASA Astrophysics Data System (ADS)

Bula, R. J.; Tibbitts, T. W.; Morrow, R. C.; Dinauer, W. R.

1992-07-01

Considerable technological progress has been made in the development of controlled environment facilities for plant growth. Although not all of the technology used for terrestrial facilities is applicable to space-based plant growth facilities, the information resident in the commercial organizations that market these facilities can provide a significant resource for the development of the plant growing component of a CELSS. In 1985, NASA initiated an effort termed the Centers for the Commercial Development of Space (CCDS). This program endeavors to develop cooperative research and technology development programs with industrial companies that capitalize on the strengths of industry-university working relationships. One of the these CCDSs, the Wisconsin Center for Space Automation and Robotics (WCSAR), deals with developing automated plant growth facilities for space, in cooperation with several industrial partners. Concepts have been developed with industrial partners for the irradiation, water and nutrient delivery, nutrient composition control and automation and robotics subsystems of plant growing units. Space flight experiments are planned for validation of the concepts in a space environment.

Commercial involvement in the development of space-based plant growing technology.

PubMed

Bula, R J; Tibbitts, T W; Morrow, R C; Dinauer, W R

1992-01-01

Considerable technological progress has been made in the development of controlled environment facilities for plant growth. Although not all of the technology used for terrestrial facilities is applicable to space-based plant growth facilities, the information resident in the commercial organizations that market these facilities can provide a significant resource for the development of the plant growing component of a CELSS. In 1985, NASA initiated an effort termed the Centers for the Commercial Development of Space (CCDS). This program endeavors to develop cooperative research and technology development programs with industrial companies that capitalize on the strengths of industry-university working relationships. One of the these CCDSs, the Wisconsin Center for Space Automation and Robotics (WCSAR), deals with developing automated plant growth facilities for space, in cooperation with several industrial partners. Concepts have been developed with industrial partners for the irradiation, water and nutrient delivery, nutrient composition control and automation and robotics subsystems of plant growing units. Space flight experiments are planned for validation of the concepts in a space environment.

CICT Computing, Information, and Communications Technology Program

NASA Technical Reports Server (NTRS)

Laufenberg, Lawrence; Tu, Eugene (Technical Monitor)

2002-01-01

The CICT Program is part of the NASA Aerospace Technology Enterprise's fundamental technology thrust to develop tools. processes, and technologies that enable new aerospace system capabilities and missions. The CICT Program's four key objectives are: Provide seamless access to NASA resources- including ground-, air-, and space-based distributed information technology resources-so that NASA scientists and engineers can more easily control missions, make new scientific discoveries, and design the next-generation space vehicles, provide high-data delivery from these assets directly to users for missions, develop goal-oriented human-centered systems, and research, develop and evaluate revolutionary technology.

Lessons learned during the development and transfer of technology related to a new Hib conjugate vaccine to emerging vaccine manufacturers.

PubMed

Hamidi, A; Boog, C; Jadhav, S; Kreeftenberg, H

2014-07-16

The incidence of Haemophilus Influenzae type b (Hib) disease in developed countries has decreased since the introduction of Hib conjugate vaccines in their National Immunization Programs (NIP). In countries where Hib vaccination is not applied routinely, due to limited availability and high cost of the vaccines, invasive Hib disease is still a cause of mortality. Through the development of a production process for a Hib conjugate vaccine and related quality control tests and the transfer of this technology to emerging vaccine manufacturers in developing countries, a substantial contribution was made to the availability and affordability of Hib conjugate vaccines in these countries. Technology transfer is considered to be one of the fastest ways to get access to the technology needed for the production of vaccines. The first Hib conjugate vaccine based on the transferred technology was licensed in 2007, since then more Hib vaccines based on this technology were licensed. This paper describes the successful development and transfer of Hib conjugate vaccine technology to vaccine manufacturers in India, China and Indonesia. By describing the lessons learned in this process, it is hoped that other technology transfer projects can benefit from the knowledge and experience gained. Copyright © 2014 Elsevier Ltd. All rights reserved.

Tool-Mediated Authentic Learning in an Educational Technology Course: A Designed-Based Innovation

ERIC Educational Resources Information Center

Amory, Alan

2014-01-01

This design-based research project is concerned with the design, development and deployment of interactive technological learning environments to support contemporary education. The use of technologies in education often replicates instructivist positions and practices. However, the use of Cultural Historical Activity Theory (C), authentic…

Development of an Instrument to Measure Preservice Teachers' Technology Skills, Technology Beliefs, and Technology Barriers

ERIC Educational Resources Information Center

Brush, Thomas; Glazewski, Krista D.; Hew, Khe Foon

2008-01-01

The purpose of this study was to develop and field-test the Technology Skills, Beliefs, and Barriers scale and to determine its validity and reliability for use with preservice teachers. Data were collected from 176 preservice teachers enrolled in a field-based teacher education program located at a major Southwestern university in the United…

The Combination Design of Enabling Technologies in Group Learning: New Study Support Service for Visually Impaired University Students

ERIC Educational Resources Information Center

Tangsri, Chatcai; Na-Takuatoong, Onjaree; Sophatsathit, Peraphon

2013-01-01

This article aims to show how the process of new service technology-based development improves the current study support service for visually impaired university students. Numerous studies have contributed to improving assisted aid technology such as screen readers, the development and the use of audiobooks, and technology that supports individual…

Electron collisions with atoms, ions, molecules, and surfaces: Fundamental science empowering advances in technology

PubMed Central

Bartschat, Klaus; Kushner, Mark J.

2016-01-01

Electron collisions with atoms, ions, molecules, and surfaces are critically important to the understanding and modeling of low-temperature plasmas (LTPs), and so in the development of technologies based on LTPs. Recent progress in obtaining experimental benchmark data and the development of highly sophisticated computational methods is highlighted. With the cesium-based diode-pumped alkali laser and remote plasma etching of Si3N4 as examples, we demonstrate how accurate and comprehensive datasets for electron collisions enable complex modeling of plasma-using technologies that empower our high-technology–based society. PMID:27317740

The Development of University Students' Self-Sufficiency Based on Interactive Technologies by Their Immersion in the Professional Activity

ERIC Educational Resources Information Center

Ljubimova, Elena Mikhaelovna; Galimullina, Elvira Zufarovna; Ibatullin, Rinat Rivkatovich

2015-01-01

The article discusses the problems of using web technologies in the development of self-sufficiency of University students. We hypothesize that real professional situations in which he/she is obliged to work independently on the basis of web technologies contribute to the development of students' self-sufficiency. It is shown that the activity…

A Green Touch for the Future of Distance Education

ERIC Educational Resources Information Center

Gundogan, M. Banu; Eby, Gulsun

2012-01-01

This paper aims to draw attention to the sustainability of distance learning in terms of the design process based on learner characteristics and technology usage. Distance learning has become a cyberized system owing its presence to developments in digital technologies. Technological developments solve some immediate problems but also have the…

Applying the Design Framework to Technology Professional Development

ERIC Educational Resources Information Center

Curwood, Jen Scott

2013-01-01

Building on contemporary research on teacher professional development, this study examined the practices of a technology-focused learning community at a high school in the United States. Over the course of a school year, classroom teachers and a university-based researcher participated in the learning community to investigate how technology can…

Leveraging the Technology du Jour for Overt and Covert Faculty Development

ERIC Educational Resources Information Center

Hagler, Debra; Kastenbaum, Beatrice; Brooks, Ruth; Morris, Brenda; Saewert, Karen J.

2013-01-01

Leveraging Educational Technology for Evidence-Based Practice (LET-EBP), a four year federally funded project, was designed to extend use of educational technologies in the prelicensure undergraduate nursing program of a large public research university. Faculty members supported through the project developed and integrated over 20…

Do-It-Yourself Professional Development

ERIC Educational Resources Information Center

Alexander, Sonja; Henderson-Rosser, Aleigha

2010-01-01

A widespread irony in education is that many districts look at technology only in relation to what the students need. As a result, they often neglect to provide teachers with technology-based learning, even though they expect them to support their students with instructional technology. And when they do offer professional development (PD), they…

Persistent Teaching Practices after Geospatial Technology Professional Development

ERIC Educational Resources Information Center

Rubino-Hare, Lori A.; Whitworth, Brooke A.; Bloom, Nena E.; Claesgens, Jennifer M.; Fredrickson, Kristi M.; Sample, James C.

2016-01-01

This case study described teachers with varying technology skills who were implementing the use of geospatial technology (GST) within project-based instruction (PBI) at varying grade levels and contexts 1 to 2 years following professional development. The sample consisted of 10 fifth- to ninth-grade teachers. Data sources included artifacts,…

Cloud-Based Speech Technology for Assistive Technology Applications (CloudCAST).

PubMed

Cunningham, Stuart; Green, Phil; Christensen, Heidi; Atria, José Joaquín; Coy, André; Malavasi, Massimiliano; Desideri, Lorenzo; Rudzicz, Frank

2017-01-01

The CloudCAST platform provides a series of speech recognition services that can be integrated into assistive technology applications. The platform and the services provided by the public API are described. Several exemplar applications have been developed to demonstrate the platform to potential developers and users.

Professional Development Integrating Technology: Does Delivery Format Matter?

ERIC Educational Resources Information Center

Claesgens, Jennifer; Rubino-Hare, Lori; Bloom, Nena; Fredrickson, Kristi; Henderson-Dahms, Carol; Menasco, Jackie; Sample, James

2013-01-01

The goal of the two Power of Data (POD) projects was to increase science, technology and math skills through the implementation of project-based learning modules that teach students how to solve problems through data collection and analysis utilizing geospatial technologies. Professional development institutes in two formats were offered to…

Knowledge Domain and Emerging Trends in Organic Photovoltaic Technology: A Scientometric Review Based on CiteSpace Analysis.

PubMed

Xiao, Fengjun; Li, Chengzhi; Sun, Jiangman; Zhang, Lianjie

2017-01-01

To study the rapid growth of research on organic photovoltaic (OPV) technology, development trends in the relevant research are analyzed based on CiteSpace software of text mining and visualization in scientific literature. By this analytical method, the outputs and cooperation of authors, the hot research topics, the vital references and the development trend of OPV are identified and visualized. Different from the traditional review articles by the experts on OPV, this work provides a new method of visualizing information about the development of the OPV technology research over the past decade quantitatively.

Knowledge Domain and Emerging trends in Organic Photovoltaic Technology: A Scientometric Review Based on CiteSpace Analysis

NASA Astrophysics Data System (ADS)

Xiao, Fengjun; Li, Chengzhi; Sun, Jiangman; Zhang, Lianjie

2017-09-01

To study the rapid growth of research on organic photovoltaic (OPV) technology, development trends in the relevant research are analyzed based on CiteSpace software of text mining and visualization in scientific literature. By this analytical method, the outputs and cooperation of authors, the hot research topics, the vital references and the development trend of OPV are identified and visualized. Different from the traditional review articles by the experts on OPV, this work provides a new method of visualizing information about the development of the OPV technology research over the past decade quantitatively.

Accident tolerant fuel cladding development: Promise, status, and challenges

NASA Astrophysics Data System (ADS)

Terrani, Kurt A.

2018-04-01

The motivation for transitioning away from zirconium-based fuel cladding in light water reactors to significantly more oxidation-resistant materials, thereby enhancing safety margins during severe accidents, is laid out. A review of the development status for three accident tolerant fuel cladding technologies, namely coated zirconium-based cladding, ferritic alumina-forming alloy cladding, and silicon carbide fiber-reinforced silicon carbide matrix composite cladding, is offered. Technical challenges and data gaps for each of these cladding technologies are highlighted. Full development towards commercial deployment of these technologies is identified as a high priority for the nuclear industry.

Perspectives on energy storage wheels for space station application

NASA Technical Reports Server (NTRS)

Oglevie, R. E.

1984-01-01

Several of the issues of the workshop are addressed from the perspective of a potential Space Station developer and energy wheel user. Systems' considerations are emphasized rather than component technology. The potential of energy storage wheel (ESW) concept is discussed. The current status of the technology base is described. Justification for advanced technology development is also discussed. The study concludes that energy storage in wheels is an attractive concept for immediate technology development and future Space Station application.

A path to in-space welding and to other in-space metal processing technologies using Space Shuttle small payloads

NASA Technical Reports Server (NTRS)

Tamir, David

1992-01-01

As we venture into space, it becomes necessary to assemble, expand, and repair space-based structures for our housing, research, and manufacturing. The zero gravity-vacuum of space challenges us to employ construction options which are commonplace on Earth. Rockwell International (RI) has begun to undertake the challenge of space-based construction via numerous options, of which one is welding. As of today, RI divisions have developed appropriate resources and technologies to bring space-based welding within our grasp. Further work, specifically in the area of developing space experiments to test RI technology, is required. RI Space Welding Project's achievements to date, from research and development (R&E) efforts in the areas of microgravity, vacuum, intra- / extra- vehicular activity and spinoff technologies, are reviewed. Special emphasis is given to results for G-169's (Get Away Special) microgravity flights aboard a NASA KC-135. Based on these achievements, a path to actual development of a space welding system is proposed with options to explore spinoff in-space metal processing technologies. This path is constructed by following a series of milestone experiments, of which several are to utilize NASA's Shuttle Small Payload Programs. Conceptual designs of the proposed shuttle payload experiments are discussed with application of lessons learned from G-169's design, development, integration, testing, safety approval process, and KC-135 flights.

Technology transfer to a developing nation, Korea

NASA Technical Reports Server (NTRS)

Stone, C. A.; Uccetta, S. J.

1973-01-01

An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

Idaho National Laboratory Supervisory Control and Data Acquisition Intrusion Detection System (SCADA IDS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jared Verba; Michael Milvich

2008-05-01

Current Intrusion Detection System (IDS) technology is not suited to be widely deployed inside a Supervisory, Control and Data Acquisition (SCADA) environment. Anomaly- and signature-based IDS technologies have developed methods to cover information technology-based networks activity and protocols effectively. However, these IDS technologies do not include the fine protocol granularity required to ensure network security inside an environment with weak protocols lacking authentication and encryption. By implementing a more specific and more intelligent packet inspection mechanism, tailored traffic flow analysis, and unique packet tampering detection, IDS technology developed specifically for SCADA environments can be deployed with confidence in detecting maliciousmore » activity.« less

Space technology research plans

NASA Technical Reports Server (NTRS)

Hook, W. Ray

1992-01-01

Development of new technologies is the primary purpose of the Office of Aeronautics and Space Technology (OAST). OAST's mission includes the following two goals: (1) to conduct research to provide fundamental understanding, develop advanced technology and promote technology transfer to assure U.S. preeminence in aeronautics and to enhance and/or enable future civil space missions: and (2) to provide unique facilities and technical expertise to support national aerospace needs. OAST includes both NASA Headquarters operations as well as programmatic and institutional management of the Ames Research Center, the Langley Research Center and the Lewis Research Center. In addition. a considerable portion of OAST's Space R&T Program is conducted through the flight and science program field centers of NASA. Within OAST, the Space Technology Directorate is responsible for the planning and implementation of the NASA Space Research and Technology Program. The Space Technology Directorate's mission is 'to assure that OAST shall provide technology for future civil space missions and provide a base of research and technology capabilities to serve all national space goals.' Accomplishing this mission entails the following objectives: y Identify, develop, validate and transfer technology to: (1) increase mission safety and reliability; (2) reduce flight program development and operations costs; (3) enhance mission performance; and (4) enable new missions. Provide the capability to: (1) advance technology in critical disciplines; and (2) respond to unanticipated mission needs. In-space experiments are an integral part of OAST's program and provides for experimental studies, development and support for in-space flight research and validation of advanced space technologies. Conducting technology experiments in space is a valuable and cost effective way to introduce advanced technologies into flight programs. These flight experiments support both the R&T base and the focussed programs within OAST.

Rapid Technology Assessment via Unified Deployment of Global Optical and Virtual Diagnostics

NASA Technical Reports Server (NTRS)

Jordan, Jeffrey D.; Watkins, A. Neal; Fleming, Gary A.; Leighty, Bradley D.; Schwartz, Richard J.; Ingram, JoAnne L.; Grinstead, Keith D., Jr.; Oglesby, Donald M.; Tyler, Charles

2003-01-01

This paper discusses recent developments in rapid technology assessment resulting from an active collaboration between researchers at the Air Force Research Laboratory (AFRL) at Wright Patterson Air Force Base (WPAFB) and the NASA Langley Research Center (LaRC). This program targets the unified development and deployment of global measurement technologies coupled with a virtual diagnostic interface to enable the comparative evaluation of experimental and computational results. Continuing efforts focus on the development of seamless data translation methods to enable integration of data sets of disparate file format in a common platform. Results from a successful low-speed wind tunnel test at WPAFB in which global surface pressure distributions were acquired simultaneously with model deformation and geometry measurements are discussed and comparatively evaluated with numerical simulations. Intensity- and lifetime-based pressure-sensitive paint (PSP) and projection moire interferometry (PMI) results are presented within the context of rapid technology assessment to enable simulation-based R&D.

Coordinated Technology-Delivered Treatment to Prevent Rehospitalization in Schizophrenia: A Novel Model of Care.

PubMed

Brunette, Mary F; Rotondi, Armando J; Ben-Zeev, Dror; Gottlieb, Jennifer D; Mueser, Kim T; Robinson, Delbert G; Achtyes, Eric D; Gingerich, Susan; Marcy, Patricia; Schooler, Nina R; Meyer-Kalos, Piper; Kane, John M

2016-04-01

Despite advances in schizophrenia treatment, symptom relapses and rehospitalizations impede recovery for many people and are a principal driver of the high cost of care. Technology-delivered or technology-enhanced treatment may be a cost-effective way to provide flexible, personalized evidence-based treatments directly to people in their homes and communities. However, evidence for the safety, acceptability, and efficacy of such interventions is only now being established. The authors of this Open Forum describe a novel, technology-based approach to prevent relapse after a hospitalization for psychosis, the Health Technology Program (HTP), which they developed. HTP provides in-person relapse prevention planning that directs use of tailored, technology-based treatment based on cognitive-behavioral therapy for psychosis, family psychoeducation for schizophrenia, and prescriber decision support through a Web-based program that solicits information from clients at every visit. Technology-based treatments are delivered through smartphones and computers.

New light field camera based on physical based rendering tracing

NASA Astrophysics Data System (ADS)

Chung, Ming-Han; Chang, Shan-Ching; Lee, Chih-Kung

2014-03-01

Even though light field technology was first invented more than 50 years ago, it did not gain popularity due to the limitation imposed by the computation technology. With the rapid advancement of computer technology over the last decade, the limitation has been uplifted and the light field technology quickly returns to the spotlight of the research stage. In this paper, PBRT (Physical Based Rendering Tracing) was introduced to overcome the limitation of using traditional optical simulation approach to study the light field camera technology. More specifically, traditional optical simulation approach can only present light energy distribution but typically lack the capability to present the pictures in realistic scenes. By using PBRT, which was developed to create virtual scenes, 4D light field information was obtained to conduct initial data analysis and calculation. This PBRT approach was also used to explore the light field data calculation potential in creating realistic photos. Furthermore, we integrated the optical experimental measurement results with PBRT in order to place the real measurement results into the virtually created scenes. In other words, our approach provided us with a way to establish a link of virtual scene with the real measurement results. Several images developed based on the above-mentioned approaches were analyzed and discussed to verify the pros and cons of the newly developed PBRT based light field camera technology. It will be shown that this newly developed light field camera approach can circumvent the loss of spatial resolution associated with adopting a micro-lens array in front of the image sensors. Detailed operational constraint, performance metrics, computation resources needed, etc. associated with this newly developed light field camera technique were presented in detail.

Integration of Problem-based Learning and Innovative Technology Into a Self-Care Course

PubMed Central

2013-01-01

Objective. To assess the integration of problem-based learning and technology into a self-care course. Design. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Assessments. Students’ scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Conclusion. Integrating problem-based learning and technology into a self-care course enabled students to become active learners. PMID:23966730

Open modular architecture controls at GM Powertrain: technology and implementation

NASA Astrophysics Data System (ADS)

Bailo, Clark P.; Yen, C. J.

1997-01-01

General Motors Powertrain Group (GMPTG) has been the leader in implementing open, modular architecture controller (OMAC) technologies in its manufacturing applications since 1986. The interest in OMAC has been greatly expanded for the past two years because of the advancement of personal computer technologies and the publishing of the OMAC whitepaper by the US automotive companies stating the requirements of OMAC technologies in automotive applications. The purpose of this paper is to describe the current OMAC projects and the future direction of implementation at GMPTG. An overview of the OMAC project and the definition of the OMAC concept are described first. The rationale of pursuing open technologies is explained from the perspective of GMPTG in lieu of its agile manufacturing strategy. Examples of existing PC-based control applications are listed to demonstrate the extensive commitment to PC-based technologies that has already been put in place. A migration plan form PC-based to OMAC-based systems with the thorough approach of validation are presented next to convey the direction that GMPTG is taking in implementing OMAC technologies. Leveraged technology development projects are described to illustrate the philosophy and approaches toward the development of OMAC technologies at GMPTG. Finally, certain implementation issues are discussed to emphasize efforts that are still required to have successful implementations of OMAC systems.

Using Avatars to Model Weight Loss Behaviors: Participant Attitudes and Technology Development

PubMed Central

Napolitano, Melissa A.; Hayes, Sharon; Russo, Giuseppe; Muresu, Debora; Giordano, Antonio; Foster, Gary D.

2013-01-01

Background: Virtual reality and other avatar-based technologies are potential methods for demonstrating and modeling weight loss behaviors. This study examined avatar-based technology as a tool for modeling weight loss behaviors. Methods: This study consisted of two phases: (1) an online survey to obtain feedback about using avatars for modeling weight loss behaviors and (2) technology development and usability testing to create an avatar-based technology program for modeling weight loss behaviors. Results: Results of phase 1 (n = 128) revealed that interest was high, with 88.3% stating that they would participate in a program that used an avatar to help practice weight loss skills in a virtual environment. In phase 2, avatars and modules to model weight loss skills were developed. Eight women were recruited to participate in a 4-week usability test, with 100% reporting they would recommend the program and that it influenced their diet/exercise behavior. Most women (87.5%) indicated that the virtual models were helpful. After 4 weeks, average weight loss was 1.6 kg (standard deviation = 1.7). Conclusion: This investigation revealed a high level of interest in an avatar-based program, with formative work indicating promise. Given the high costs associated with in vivo exposure and practice, this study demonstrates the potential use of avatar-based technology as a tool for modeling weight loss behaviors. PMID:23911189

Design Principles for Nickel/Hydrogen Cells and Batteries

NASA Technical Reports Server (NTRS)

Thaller, Lawrence H.; Manzo, Michelle A.; Gonzalez-Sanabria, Olga D.

1987-01-01

Individual-pressure-vessel (IPV) nickel/hydrogen cells and bipolar batteries developed for use as energy-storage subsystems for satelite applications. Design principles applied draw upon extensive background in separator technology, alkaline-fuel-cell technology and several alkaline-cell technology areas. Principals are rather straightforward applications of capillary-force formalisms, coupled with slowly developing data base resulting from careful post-test analyses. Based on preconceived assumptions relative to how devices work and how to be designed so they display longer cycle lives at deep discharge.

NASA space station automation: AI-based technology review

NASA Technical Reports Server (NTRS)

Firschein, O.; Georgeff, M. P.; Park, W.; Neumann, P.; Kautz, W. H.; Levitt, K. N.; Rom, R. J.; Poggio, A. A.

1985-01-01

Research and Development projects in automation for the Space Station are discussed. Artificial Intelligence (AI) based automation technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics. AI technology will also be developed for the servicing of satellites at the Space Station, system monitoring and diagnosis, space manufacturing, and the assembly of large space structures.

Update on the SKA Offset Optics Design for the U.S. Technology Development Project

NASA Technical Reports Server (NTRS)

Imbriale, William A.; Cortes-Medellin, German; Baker, Lynn

2011-01-01

The U.S. design concept for the Square Kilometre Array (SKA) program is based on utilizing a large number of small-diameter dish antennas in the 12 to 15 meter diameter range. The Technology Development Project (TDP) is planning to design and build the first of these antennas to provide a demonstration of the technology and a solid base on which to estimate costs. The latest considerations for selecting both the optics and feed design are presented.

Energy Savings Potential and RD&D Opportunities for Commercial Building HVAC Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Shandross, Richard; Young, Jim

The Building Technologies Office (BTO) commissioned this characterization and technology assessment of heating, ventilation, and air-conditioning (HVAC) systems for commercial buildings. The main objectives of this study: Identify a wide range of technology options in varying stages of development that could reduce commercial HVAC energy consumption; Characterize these technology options based on their technical energy-savings potential, development status, non-energy benefits, and other factors affecting end-user acceptance and the ability to compete with conventional HVAC technologies; Make specific recommendations to DOE and other stakeholders on potential research, development, and demonstration (RD&D) activities that would support further development of the most promisingmore » technology options.« less

High temperature coatings from post processing Fe-based chips and Ni-based alloys as a solution for critical raw materials

NASA Astrophysics Data System (ADS)

Dudziak, T.; Olbrycht, A.; Polkowska, A.; Boron, L.; Skierski, P.; Wypych, A.; Ambroziak, A.; Krezel, A.

2018-03-01

Due to shortage of natural resources worldwide, it is a need to develop innovative technologies, to save natural resources and secure Critical Raw Materials (CRM). On the other hand, these new technologies should move forward materials engineering in order to develop better materials for extreme conditions. One way to develop new materials is to use post processing chips of austenitic steels (i.e. 304L stainless steel: 18/10 Cr/Ni) and other materials such as Ni-based alloy with high Cr content. In this work, the results of the preliminary study on the High Velocity Oxy Fuel (HVOF) coatings developed from 304L stainless steel chips and Haynes® 282® Ni- based alloys are shown. The study obeys development of the powder for HVOF technology. The produced coatings were exposed at high temperature at 500 and 700 °C for 100 and 300 hours respectively to assess corrosion behaviour.

KNOW ESSENTIALS: a tool for informed decisions in the absence of formal HTA systems.

PubMed

Mathew, Joseph L

2011-04-01

Most developing countries and resource-limited settings lack robust health technology assessment (HTA) systems. Because the development of locally relevant HTA is not immediately viable, and the extrapolation of external HTA is inappropriate, a new model for evaluating health technologies is required. The aim of this study was to describe the development and application of KNOW ESSENTIALS, a tool facilitating evidence-based decisions on health technologies by stakeholders in settings lacking formal HTA systems. Current HTA methodology was examined through literature search. Additional issues relevant to resource-limited settings, but not adequately addressed in current methodology, were identified through further literature search, appraisal of contextually relevant issues, discussion with healthcare professionals familiar with the local context, and personal experience. A set of thirteen elements important for evidence-based decisions was identified, selected and combined into a tool with the mnemonic KNOW ESSENTIALS. Detailed definitions for each element, coding for the elements, and a system to evaluate a given health technology using the tool were developed. Developing countries and resource-limited settings face several challenges to informed decision making. Models that are relevant and applicable in high-income countries are unlikely in such settings. KNOW ESSENTIALS is an alternative that facilitates evidence-based decision making by stakeholders without formal expertise in HTA. The tool could be particularly useful, as an interim measure, in healthcare systems that are developing HTA capacity. It could also be useful anywhere when rapid evidence-based decisions on health technologies are required.

ICT-based applications to improve social health and social participation in older adults with dementia. A systematic literature review.

PubMed

Pinto-Bruno, Ángel C; García-Casal, J Antonio; Csipke, Emese; Jenaro-Río, Cristina; Franco-Martín, Manuel

2017-01-01

Information and communication technologies (ICT) developers, together with dementia experts have created several technological solutions to improve and facilitate social health and social participation and quality of life of older adults living with dementia. However, there is a need to carry out a systematic literature review that focuses on the validity and efficacy of these new technologies assessing their utility to promote 'social health' and 'active ageing' in people with dementia. Searches in electronic databases identified 3824 articles of which 6 met the inclusion criteria and were coded according to their methodological approach, sample sizes, type of outcomes and results. Six papers were identified reporting the use of 10 different interventions with people with dementia. Qualitative studies (four) showed a benefit of the use of technologies to foster social participation in people with dementia. At the same time, barriers to a widespread use of these technologies in this population were identified. A quantitative study and a mixed-method study with quantitative outcomes showed that ICT-based interventions promote more social behaviours than non-technology-based interventions. In the last years, several technological devices for living independently and fostering social health and social participation in people with dementia have been developed. However, specific outcome measures to assess social health and social participation are needed. Even though the analysed studies provided some evidence-base for the use of technology in this field, there is an urge to develop high quality studies and specific outcome measures.

Quality Inspection and Analysis of Three-Dimensional Geographic Information Model Based on Oblique Photogrammetry

NASA Astrophysics Data System (ADS)

Dong, S.; Yan, Q.; Xu, Y.; Bai, J.

2018-04-01

In order to promote the construction of digital geo-spatial framework in China and accelerate the construction of informatization mapping system, three-dimensional geographic information model emerged. The three-dimensional geographic information model based on oblique photogrammetry technology has higher accuracy, shorter period and lower cost than traditional methods, and can more directly reflect the elevation, position and appearance of the features. At this stage, the technology of producing three-dimensional geographic information models based on oblique photogrammetry technology is rapidly developing. The market demand and model results have been emerged in a large amount, and the related quality inspection needs are also getting larger and larger. Through the study of relevant literature, it is found that there are a lot of researches on the basic principles and technical characteristics of this technology, and relatively few studies on quality inspection and analysis. On the basis of summarizing the basic principle and technical characteristics of oblique photogrammetry technology, this paper introduces the inspection contents and inspection methods of three-dimensional geographic information model based on oblique photogrammetry technology. Combined with the actual inspection work, this paper summarizes the quality problems of three-dimensional geographic information model based on oblique photogrammetry technology, analyzes the causes of the problems and puts forward the quality control measures. It provides technical guidance for the quality inspection of three-dimensional geographic information model data products based on oblique photogrammetry technology in China and provides technical support for the vigorous development of three-dimensional geographic information model based on oblique photogrammetry technology.

Space technology, sustainable development and community applications: Internet as a facilitator

NASA Astrophysics Data System (ADS)

Peter, Nicolas; Afrin, Nadia; Goh, Gérardine; Chester, Ed

2006-07-01

Among other approaches, space technologies are currently being deployed for disaster management, environmental monitoring, urban planning, health applications, communications, etc. Although space-based applications have tremendous potential for socioeconomic development, they are primarily technology driven and the requirements from the end-users (i.e. the development community) are rarely taken into consideration during the initial development stages. This communication gap between the "space" and "development" communities can be bridged with the help of the web-based knowledge sharing portal focused on space applications for development. This online community uses the development gateway foundation's sophisticated content management system. It is modeled after the development gateway's knowledge sharing portals ( http://topics.developmentgateway.org) and draws from their expertise in knowledge management, partnership building and marketing. These types of portal are known to facilitate broad-based partnerships across sectors, regions and the various stakeholders but also to facilitate North-South and South-South cooperation. This paper describes the initiative "Space for Development" ( http://topics.developmentgateway.org/space) started in 2004 which aims to demonstrate how such a web-based portal can be structured to facilitate knowledge sharing in order to bridge the gap between the "space" and "development" communities in an innovative and global manner.

Improvement of Base and Soil Construction Quality by Using Intelligent Compaction Technology : Final Report.

DOT National Transportation Integrated Search

2017-08-01

Intelligent Compaction (IC) technique is a fast-developing technology for base and soil compaction quality control. Proof-rolling subgrades and bases using IC rollers upon completion of compaction can identify the less stiff spots and significantly i...

Test Analysis Guidelines

NASA Technical Reports Server (NTRS)

Jeng, Frank F.

2007-01-01

Development of analysis guidelines for Exploration Life Support (ELS) technology tests was completed. The guidelines were developed based on analysis experiences gained from supporting Environmental Control and Life Support System (ECLSS) technology development in air revitalization systems and water recovery systems. Analyses are vital during all three phases of the ELS technology test: pre-test, during test and post test. Pre-test analyses of a test system help define hardware components, predict system and component performances, required test duration, sampling frequencies of operation parameters, etc. Analyses conducted during tests could verify the consistency of all the measurements and the performance of the test system. Post test analyses are an essential part of the test task. Results of post test analyses are an important factor in judging whether the technology development is a successful one. In addition, development of a rigorous model for a test system is an important objective of any new technology development. Test data analyses, especially post test data analyses, serve to verify the model. Test analyses have supported development of many ECLSS technologies. Some test analysis tasks in ECLSS technology development are listed in the Appendix. To have effective analysis support for ECLSS technology tests, analysis guidelines would be a useful tool. These test guidelines were developed based on experiences gained through previous analysis support of various ECLSS technology tests. A comment on analysis from an experienced NASA ECLSS manager (1) follows: "Bad analysis was one that bent the test to prove that the analysis was right to begin with. Good analysis was one that directed where the testing should go and also bridged the gap between the reality of the test facility and what was expected on orbit."

Cutting Edge Technologies Presentation: An Overview of Developing Sensor Technology Directions and Possible Barriers to New Technology Implementation

NASA Technical Reports Server (NTRS)

Hunter, Gary W.

2007-01-01

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A range of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption; and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity, However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This presentation gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology.

Online Assessment in Mathematics and Writing: Reports from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2005-457

ERIC Educational Resources Information Center

Sandene, Brent; Horkay, Nancy; Bennett, Randy Elliot; Allen, Nancy; Braswell, James; Kaplan, Bruce; Oranje, Andreas

2005-01-01

This publication presents the reports from two studies, Math Online (MOL) and Writing Online (WOL), part of the National Assessment of Educational Progress (NAEP) Technology-Based Assessment (TBA) project. Funded by the National Center for Education Statistics (NCES), the Technology-Based Assessment project is intended to explore the use of new…

Review of past, present, and future of recording technology

NASA Astrophysics Data System (ADS)

Al-Jibouri, Abdul-Rahman

2003-03-01

The revolution of information storage and recording has been advanced significantly over the past two decades. Since the development of computers in early 1950s by IBM, the data (information) was stored on magnetic disc by inducing magnetic flux to define the pit direction. The first disc was developed by IBM with diameter of 25inch to store around 10 kByte. After four decades, the disc drive has become more advanced by reducing the drive size, increasing ariel density and cost reduction. The introduction of new computer operating systems and the Internet resulted in the need to develop high ariel density in the 1990s. Therefore, the disc drive manufacturers were pushed harder to develop new technologies at low cost to survive the competitive market. The disc drives, which are based on media (where the data/information is stored) and the head (which will write and read data/information). The head and disc are separated and with the current technology the spacing between the disc and head is about 40nm. A new technology based on magnetic recording was developed to serve the audio market. This technology is called magnetic type, it is similar to the disc drive, but the media is based on tape rather than rigid disc. Another difference being the head and media are in direct contact. Magnetic tape was developed for audio application and a few years later this technology was extended to allow and accept another technology, called video. This allows consumers to record and view movies in their home. The magnetic tape also used the computer industries for back up data. Magnetic tape is still used in computers and has advanced further over the past decade, companies like Quantum Corp has developed digital linear tape.

Utilizing Technology to Examine the Impacts of Academic Program Plans on Faculty Staffing Levels. AIR 1984 Annual Forum Paper.

ERIC Educational Resources Information Center

Spiro, Louis M.; Campbell, Jill F.

The development and use of a campus-based computerized faculty staffing model is described. In addition to considering market demands for current and proposed programs, decisionmakers need to consider how program development, modification, and elimination affect the total college faculty resource base. The application of computer technology,…

Development of Articulated Competency-Based Curriculum in Laser/Electro-Optics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

The project described in this report was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in conjunction with area vocational-technical schools, the second year of a competency-based curriculum in laser/electro-optics technology. During the project, a task force of teachers from the area schools and the college…

Virtual Task-Based Situated Language-Learning with "Second Life": Developing EFL Pragmatic Writing and Technological Self-Efficacy

ERIC Educational Resources Information Center

Abdallah, Mahmoud M. S.; Mansour, Marian M.

2015-01-01

This paper reports on an experimental research study that aimed at investigating the effectiveness of employing a virtual task-based situated language learning (TBSLL) environment mediated by Second Life (SL) in developing EFL student teachers' pragmatic writing skills and their technological self-efficacy. To reach this goal, a control-only…

Development of Articulated Competency-Based Curriculum in Automated Systems/Robotics Technology. Final Report.

ERIC Educational Resources Information Center

Luzerne County Community Coll., Nanticoke, PA.

The project described in this report was conducted at the Community College of Luzerne County (Pennsylvania) to develop, in conjunction with area vocational-technical schools, the second year of a competency-based curriculum in automated systems/robotics technology. During the project, a task force of teachers from the area schools and the college…

Developing a Framework for Social Technologies in Learning via Design-Based Research

ERIC Educational Resources Information Center

Parmaxi, Antigoni; Zaphiris, Panayiotis

2015-01-01

This paper reports on the use of design-based research (DBR) for the development of a framework that grounds the use of social technologies in learning. The paper focuses on three studies which step on the learning theory of constructionism. Constructionism assumes that knowledge is better gained when students find this knowledge for themselves…

La détection infrarouge avec les plans focaux non refroidis : état de l'artUncooled focal plane infrared detectors: the state of the art

NASA Astrophysics Data System (ADS)

Tissot, Jean-Luc

2003-12-01

The emergence of uncooled detectors has opened new opportunities for IR detection for both military and commercial applications. Development of such devices involves a lot of trade-offs between the different parameters that define the technological stack. These trade-offs explain the number of different architectures that are under worldwide development. The key factor is to find a high sensitivity and low noise thermometer material compatible with silicon technology in order to achieve high thermal isolation in the smallest area as possible. Ferroelectric thermometer based hybrid technology and electrical resistive thermometer based (microbolometer) technology are under development. LETI and ULIS have chosen from the very beginning to develop first a monolithic microbolometer technology fully compatible with commercially available CMOS technology and secondly amorphous silicon based thermometer. This silicon approach has the greatest potential for reducing infrared detector manufacturing cost. After the development of the technology, the transfer to industrial facilities has been performed in a short period of time and the production is now ramping up with ULIS team in new facilities. LETI and ULIS are now working to facilitate the IRFPA integration into equipment in order to address a very large market. Achievement of this goal needs the development of smart sensors with on-chip advanced functions and the decrease of manufacturing cost of IRFPA by decreasing the pixel pitch and simplifying the vacuum package. We present in this paper the technology developed by CEA/LETI and its improvement for being able to designs 384×288 and 160×120 arrays with a pitch of 35 μm. Thermographic application needs high stability infrared detector with a precise determination of the amount of absorbed infrared flux. Hence, infrared detector with internal temperature stabilized shield has been developed and characterized. These results will be presented. To cite this article: J.-L. Tissot, C. R. Physique 4 (2003).

A study of mass data storage technology for rocket engine data

NASA Technical Reports Server (NTRS)

Ready, John F.; Benser, Earl T.; Fritz, Bernard S.; Nelson, Scott A.; Stauffer, Donald R.; Volna, William M.

1990-01-01

The results of a nine month study program on mass data storage technology for rocket engine (especially the Space Shuttle Main Engine) health monitoring and control are summarized. The program had the objective of recommending a candidate mass data storage technology development for rocket engine health monitoring and control and of formulating a project plan and specification for that technology development. The work was divided into three major technical tasks: (1) development of requirements; (2) survey of mass data storage technologies; and (3) definition of a project plan and specification for technology development. The first of these tasks reviewed current data storage technology and developed a prioritized set of requirements for the health monitoring and control applications. The second task included a survey of state-of-the-art and newly developing technologies and a matrix-based ranking of the technologies. It culminated in a recommendation of optical disk technology as the best candidate for technology development. The final task defined a proof-of-concept demonstration, including tasks required to develop, test, analyze, and demonstrate the technology advancement, plus an estimate of the level of effort required. The recommended demonstration emphasizes development of an optical disk system which incorporates an order-of-magnitude increase in writing speed above the current state of the art.

Photonic sensors review recent progress of fiber sensing technologies in Tianjin University

NASA Astrophysics Data System (ADS)

Liu, Tiegen; Liu, Kun; Jiang, Junfeng; Li, Enbang; Zhang, Hongxia; Jia, Dagong; Zhang, Yimo

2011-03-01

The up to date progress of fiber sensing technologies in Tianjin University are proposed in this paper. Fiber-optic temperature sensor based on the interference of selective higher-order modes in circular optical fiber is developed. Parallel demodulation for extrinsic Fabry-Perot interferometer (EFPI) and fiber Bragg grating (FBG) sensors is realized based on white light interference. Gas concentration detection is realized based on intra-cavity fiber laser spectroscopy. Polarization maintaining fiber (PMF) is used for distributed position or displacement sensing. Based on the before work and results, we gained National Basic Research Program of China on optical fiber sensing technology and will develop further investigation in this area.

The Impact of Numerical Control Technology and Computer Aided Manufacturing on Curriculum Development in Industrial Education and Technology. A Final Report.

ERIC Educational Resources Information Center

Bauch, Klaus Dieter

The study was designed to investigate the effects of Numerical Control Technology and Computer-Aided Manufacturing (NC/CAM) in American industry on industrial education and engineering technology education. The specific purpose was to identify a data base and rationale for curriculum development in NC/CAM through a comparison of views by…

Assistive Technology Developments in Puerto Rico.

ERIC Educational Resources Information Center

Lizama, Mauricio A.; Mendez, Hector L.

Recent efforts to develop Spanish-based adaptations for alternate computer input devices are considered, as are their implications for Hispanics with disabilities and for the development of language sensitive devices worldwide. Emphasis is placed on the particular need to develop low-cost high technology devices for Puerto Rico and Latin America…

Raising Awareness of Assistive Technology in Older Adults through a Community-Based, Cooperative Extension Program

ERIC Educational Resources Information Center

Sellers, Debra M.; Markham, Melinda Stafford

2012-01-01

The Fashion an Easier Lifestyle with Assistive Technology (FELAT) curriculum was developed as a needs-based, community educational program provided through a state Cooperative Extension Service. The overall goal for participants was to raise awareness of assistive technology. Program evaluation included a postassessment and subsequent interview to…

Developing a Web-Based Tool Using Information and Communication Technologies to Expand the Reach and Impact of Photovoice

ERIC Educational Resources Information Center

Strack, Robert W.; Orsini, Muhsin Michael; Fearnow-Kenney, Melodie; Herget, Jennifer; Milroy, Jeffrey J.; Wyrick, David L.

2015-01-01

Information and communication technologies are opening up vast new arenas for conducting the work of health promotion. Technology-based health promotions expand reach, standardize information and its delivery, provide opportunities for tailoring, create engaging interactivity within content delivery, provide for privacy and autonomy, improve…

Closing the Achievement Gap with Culturally Relevant Technology-Based Learning Environments

ERIC Educational Resources Information Center

Joseph, Roberto

2009-01-01

The most significant educational problem of our time has been the achievement gap. The author discusses the need for the field of educational technology to join in the social movement to close this gap. He provides background on the significance of incorporating culture throughout the design and development of technology-based learning…

Technology-Based Oil and Natural Gas Plays: Shale Shock! Could There Be Billions in the Bakken?

EIA Publications

2006-01-01

This report presents information about the Bakken Formation of the Williston Basin: its location, production, geology, resources, proved reserves, and the technology being used for development. This is the first in a series intending to share information about technology-based oil and natural gas plays.

Developing a User Guide to Integrating New Technologies in Science Teaching and Learning: Teachers' and Pupils' Perceptions of Their Affordances

ERIC Educational Resources Information Center

de Winter, James; Winterbottom, Mark; Wilson, Elaine

2010-01-01

This paper reports outcomes of a project in which five teachers developed a web-based user guide to integrating new technologies in secondary science teaching. The guide aimed to support the initial education of trainee teachers, and the professional development of mentors, in working with, and understanding the affordances of, new technologies.…

Development of the technology of manufacturing a ceramic tip of a resectoscope

NASA Astrophysics Data System (ADS)

Akhmetov, I. D.; Kashapov, R. N.; Kashapov, L. N.

2017-09-01

The development of medical technology is strongly correlated with the development of new materials and the technology of their processing. At the moment, the most common type of surgery is resection of the prostate gland, for its use a resectoscope is used. In this work, the problem of increasing the mechanical characteristics of ceramic tips of resectoscopes is solved. The material of yttrium stabilized zirconia has been tested and manufacturing technology based on CAD / CAM and heat treatment has been proposed

[Advances in peroxide-based decontaminating technologies].

PubMed

Xi, Hai-ling; Zhao, San-ping; Zhou, Wen

2013-05-01

With the boosting demand for eco-friendly decontaminants, great achievements in peroxide-based decontaminating technologies have been made in recent years. These technologies have been applied in countering chemical/biological terrorist attacks, dealing with chemical/biological disasters and destructing environmental pollutants. Recent research advances in alpha-nucleophilic/oxidative reaction mechanisms of peroxide-based decontamination against chemical warfare agents were reviewed, and some classical peroxide-based decontaminants such as aqueous decontaminating solution, decontaminating foam, decontaminating emulsions, decontaminating gels, decontaminating vapors, and some newly developed decontaminating media (e.g., peroxide-based self-decontaminating materials and heterogeneous nano-catalytic decontamination systems) were introduced. However, currently available peroxide-based decontaminants still have some deficiencies. For example, their decontamination efficiencies are not as high as those of chlorine-containing decontaminants, and some peroxide-based decontaminants show relatively poor effect against certain agents. More study on the mechanisms of peroxide-based decontaminants and the interfacial interactions in heterogeneous decontamination media is suggested. New catalysts, multifunctional surfactants, self-decontaminating materials and corrosion preventing technologies should be developed before peroxide-based decontaminants really become true "green" decontaminants.

[Telepsychiatry provides new opportunities for the prevention and treatment of mental health disorders].

PubMed

Folker, Marie Paldam; Helverskov, Trine; Nielsen, Amalie Søgaard; Jørgensen, Ulla Skov; Larsen, John Teilmann

2018-04-23

Digital technologies in mental healthcare are envisioned to offer easier, faster and more cost-effective access to mental healthcare. The scope for integrating digital technology into mental healthcare is vast: video conferencing, developing novel treatments using interactive software, mobile applications, and sensor technologies. We outline technology-based interventions, which are relevant to clinical practice, and present the evidence base for using digital technology as well as emerging challenges for their implementation in clinical practice.

Internet-based computer technology on radiotherapy.

PubMed

Chow, James C L

2017-01-01

Recent rapid development of Internet-based computer technologies has made possible many novel applications in radiation dose delivery. However, translational speed of applying these new technologies in radiotherapy could hardly catch up due to the complex commissioning process and quality assurance protocol. Implementing novel Internet-based technology in radiotherapy requires corresponding design of algorithm and infrastructure of the application, set up of related clinical policies, purchase and development of software and hardware, computer programming and debugging, and national to international collaboration. Although such implementation processes are time consuming, some recent computer advancements in the radiation dose delivery are still noticeable. In this review, we will present the background and concept of some recent Internet-based computer technologies such as cloud computing, big data processing and machine learning, followed by their potential applications in radiotherapy, such as treatment planning and dose delivery. We will also discuss the current progress of these applications and their impacts on radiotherapy. We will explore and evaluate the expected benefits and challenges in implementation as well.

National Technology Center and photonics

NASA Astrophysics Data System (ADS)

Vlannes, Nickolas P.

1992-05-01

A National Technology Center is proposed in order to meet the international challenges to the economy and security of the United States. This center would be tasked with the acquisition, analysis, assessment, and dissemination of worldwide scientific and technical information and data; technology transfer to the United States; and research and development in information and library sciences and technology. The National Technology Center would form a national network linking centers of excellence and expertise, and maintain a national technology library. With these functions, the National Technology Center has inherent requirements for technologies based on photonics, and will further motivate developments in this field.

Summary of Research Report Cooperative Agreement

NASA Technical Reports Server (NTRS)

1997-01-01

Several areas of work related to commercialization of technology developed at NASA Ames Research Center (ARC) are discussed in this report. The areas are: (1) perform a feasibility study to develop a software commercialization center is at ARC; (2) perform preliminary work for formation of joint development of sensor technology for telemedicine applications; (3) development of a discovery interview process and staff training to assist the commercialization of technology developed at Ames, specifically aimed at working with researchers; (4) develop partners to further develop and commercialize image compression technology developed at AMES; (5) assist efforts to commercialize a software technology which imparts the ability to establish relevance-based retrieval in the handling of large repositories of information; (6) explore the development of cryocooler technology using pulse tube refrigeration; (7) assess interest in commercialization of a new method of measuring skin friction drag on wind tunnel models using liquid crystal material; (8) attempt to incorporate emerging technologies in the infrastructure of natural hazards mitigation; and (9) forming a nonprofit organization, "The Bootstrap Alliance", whose mission is to promote the use of digital technologies for collaborative problem solving. The results of these initiatives are discussed.

Space station needs, attributes, and architectural options: Technology development

NASA Technical Reports Server (NTRS)

Robert, A. C.

1983-01-01

The technology development of the space station is examined as it relates to space station growth and equipment requirements for future missions. Future mission topics are refined and used to establish a systems data base. Technology for human factors engineering, space maintenance, satellite design, and laser communications and tracking is discussed.

Ink Jet Printing for Silicon Photovoltaics: Cooperative Research and Development Final Report, CRADA Number CRD-04-00139

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ginley, D. S.

2010-08-01

The purpose of this CRADA was to combine the strengths of NREL and Evergreen Solar in the area of ink jet printing to develop a new manufacturing technology necessary to produce Si solar cells based on ribbon technology comparable to or exceeding current technologies.

Examining Pre-Service Teacher Views on the Implementation of Screen-Based Writing Instruction

ERIC Educational Resources Information Center

Tok, Mehmet

2015-01-01

Today, as new technological developments continue to emerge, education, like many other fields, is going through major changes. Technological developments are causing changes to many common concepts. In particular, studies that benefit from technology in the field of education are becoming increasingly widespread, opening the door for the…

Nuclear Medical Technology. Curriculum for a Two Year Program. Final Report.

ERIC Educational Resources Information Center

Buatti, A.; Rich, D.

Objectives of the project briefly described here were (1) to develop curriculum for a two-year nuclear medical technology program based on a working relationship between three institutions (community college, university health center, and hospital) and (2) to develop procedures for the operation of a medical imaging and radiation technology core…

Developing Pre-Service Teachers' Capacity in Teaching Science with Technology through Microteaching Lesson Study Approach

ERIC Educational Resources Information Center

Zhou, George; Xu, Judy; Martinovic, Dragana

2017-01-01

In order to effectively use technology in teaching, teacher candidates need to develop technology related pedagogical content knowledge through being engaged in a process of discussion, modeling, practice, and reflection. Based on the examination of teacher candidates' lesson plan assignments, observations of their microteaching performance, and…

Benchmarking the Intended Technology Curricula of Botswana and South Africa: What Can We Learn?

ERIC Educational Resources Information Center

Du Toit, Adri; Gaotlhobogwe, Michael

2017-01-01

Following a transformation of experience-based handicraft education, Technology education was introduced in Botswana and South Africa in 1990 and 1998, respectively, with the intention of developing technologically literate societies, as well as to develop learners' skills for the world of work. Despite these optimistic intentions, limited…

The Impact of Experiencing 5E Learning Cycle on Developing Science Teachers' Technological Pedagogical Content Knowledge (TPACK)

ERIC Educational Resources Information Center

Mustafa, Mohamed Elfatih I.

2016-01-01

This study investigated the conditions and situations offered by Experiencing Inquiry Model (EIM) for developing science teacher's Technological Pedagogical Content Knowledge (TPACK). Also, the study explored the opportunities offered by EIM strategy in enhancing science teacher's abilities to design technology-based inquiry activities for science…

Technology and Current Reading/Literacy Assessment Strategies

ERIC Educational Resources Information Center

Balajthy, Ernest

2007-01-01

Computer-based technologies offer promise as a means to assess students and provide teachers with better understandings of their students' achievement. This article describes recent developments in computer-based and web-based reading and literacy assessment, focusing on assessment administration, information management, and report creation. In…

Agriscience Teachers' Implementation of Digital Game-based Learning in an Introductory Animal Science Course

NASA Astrophysics Data System (ADS)

Webb, Angela W.; Bunch, J. C.; Wallace, Maria F. G.

2015-12-01

In today's technological age, visions for technology integration in the classroom continue to be explored and examined. Digital game-based learning is one way to purposefully integrate technology while maintaining a focus on learning objectives. This case study sought to understand agriscience teachers' experiences implementing digital game-based learning in an introductory animal science course. From interviews with agriscience teachers on their experiences with the game, three themes emerged: (1) the constraints of inadequate and inappropriate technologies, and time to game implementation; (2) the shift in teacher and student roles necessitated by implementing the game; and (3) the inherent competitive nature of learning through the game. Based on these findings, we recommend that pre-service and in-service professional development opportunities be developed for teachers to learn how to implement digital game-based learning effectively. Additionally, with the potential for simulations that address cross-cutting concepts in the next generation science standards, digital game-based learning should be explored in various science teaching and learning contexts.

Space-based Networking Technology Developments in the Interplanetary Network Directorate Information Technology Program

NASA Technical Reports Server (NTRS)

Clare, Loren; Clement, B.; Gao, J.; Hutcherson, J.; Jennings, E.

2006-01-01

Described recent development of communications protocols, services, and associated tools targeted to reduce risk, reduce cost and increase efficiency of IND infrastructure and supported mission operations. Space-based networking technologies developed were: a) Provide differentiated quality of service (QoS) that will give precedence to traffic that users have selected as having the greatest importance and/or time-criticality; b) Improve the total value of information to users through the use of QoS prioritization techniques; c) Increase operational flexibility and improve command-response turnaround; d) Enable new class of networked and collaborative science missions; e) Simplify applications interfaces to communications services; and f) Reduce risk and cost from a common object model and automated scheduling and communications protocols. Technologies are described in three general areas: communications scheduling, middleware, and protocols. Additionally developed simulation environment, which provides comprehensive, quantitative understanding of the technologies performance within overall, evolving architecture, as well as ability to refine & optimize specific components.

Cryogenic fluid management in space

NASA Technical Reports Server (NTRS)

Antar, Basil N.

1988-01-01

Many future space based vehicles and satellites will require on orbit refuelling procedures. Cryogenic fluid management technology is being developed to assess the requirements of such procedures as well as to aid in the design and development of these vehicles. Cryogenic fluid management technology for this application could be divided into two areas of study, one is concerned with fluid transfer process and the other with cryogenic liquid storage. This division is based upon the needed technology for the development of each area. In the first, the interaction of fluid dynamics with thermodynamics is essential, while in the second only thermodynamic analyses are sufficient to define the problem. The following specific process related to the liquid transfer area are discussed: tank chilldown and fill; tank pressurization; liquid positioning; and slosh dynamics and control. These specific issues are discussed in relation with the required technology for their development in the low gravity application area. In each process the relevant physics controlling the technology is identified and methods for resolving some of the basic questions are discussed.

Towards a Graphene-Based Low Intensity Photon Counting Photodetector

PubMed Central

Williams, Jamie O. D.; Alexander-Webber, Jack A.; Lapington, Jon S.; Roy, Mervyn; Hutchinson, Ian B.; Sagade, Abhay A.; Martin, Marie-Blandine; Braeuninger-Weimer, Philipp; Cabrero-Vilatela, Andrea; Wang, Ruizhi; De Luca, Andrea; Udrea, Florin; Hofmann, Stephan

2016-01-01

Graphene is a highly promising material in the development of new photodetector technologies, in particular due its tunable optoelectronic properties, high mobilities and fast relaxation times coupled to its atomic thinness and other unique electrical, thermal and mechanical properties. Optoelectronic applications and graphene-based photodetector technology are still in their infancy, but with a range of device integration and manufacturing approaches emerging this field is progressing quickly. In this review we explore the potential of graphene in the context of existing single photon counting technologies by comparing their performance to simulations of graphene-based single photon counting and low photon intensity photodetection technologies operating in the visible, terahertz and X-ray energy regimes. We highlight the theoretical predictions and current graphene manufacturing processes for these detectors. We show initial experimental implementations and discuss the key challenges and next steps in the development of these technologies. PMID:27563903

Creating Communications, Computing, and Networking Technology Development Road Maps for Future NASA Human and Robotic Missions

NASA Technical Reports Server (NTRS)

Bhasin, Kul; Hayden, Jeffrey L.

2005-01-01

For human and robotic exploration missions in the Vision for Exploration, roadmaps are needed for capability development and investments based on advanced technology developments. A roadmap development process was undertaken for the needed communications, and networking capabilities and technologies for the future human and robotics missions. The underlying processes are derived from work carried out during development of the future space communications architecture, an d NASA's Space Architect Office (SAO) defined formats and structures for accumulating data. Interrelationships were established among emerging requirements, the capability analysis and technology status, and performance data. After developing an architectural communications and networking framework structured around the assumed needs for human and robotic exploration, in the vicinity of Earth, Moon, along the path to Mars, and in the vicinity of Mars, information was gathered from expert participants. This information was used to identify the capabilities expected from the new infrastructure and the technological gaps in the way of obtaining them. We define realistic, long-term space communication architectures based on emerging needs and translate the needs into interfaces, functions, and computer processing that will be required. In developing our roadmapping process, we defined requirements for achieving end-to-end activities that will be carried out by future NASA human and robotic missions. This paper describes: 10 the architectural framework developed for analysis; 2) our approach to gathering and analyzing data from NASA, industry, and academia; 3) an outline of the technology research to be done, including milestones for technology research and demonstrations with timelines; and 4) the technology roadmaps themselves.

Preparing Mathematics Teachers for Technology-Rich Environments

ERIC Educational Resources Information Center

Sturdivant, Rodney X.; Dunham, Penelope; Jardine, Richard

2009-01-01

This article describes key elements for faculty development programs to prepare mathematics teachers for technology-rich environments. We offer practical examples from our experiences in teaching mathematics with technology and in teaching others to incorporate technology-based pedagogies. We address challenges faced by faculty using technology,…

[Advances on enzymes and enzyme inhibitors research based on microfluidic devices].

PubMed

Hou, Feng-Hua; Ye, Jian-Qing; Chen, Zuan-Guang; Cheng, Zhi-Yi

2010-06-01

With the continuous development in microfluidic fabrication technology, microfluidic analysis has evolved from a concept to one of research frontiers in last twenty years. The research of enzymes and enzyme inhibitors based on microfluidic devices has also made great progress. Microfluidic technology improved greatly the analytical performance of the research of enzymes and enzyme inhibitors by reducing the consumption of reagents, decreasing the analysis time, and developing automation. This review focuses on the development and classification of enzymes and enzyme inhibitors research based on microfluidic devices.

Technology assessment and strategy for development of a Rapid Field Water Microbiology Test Kit. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, D.R.; Schaub, S.A.

1991-09-01

A literature and market search of existing technology for the detection, identification, and quantification of microorganisms in water was conducted. Based upon the availability of technologies and their configurations, an assessment of the appropriate strategies to pursue for the near and long term development plans in development of the Rapid Field Bacteriology Test Kit was performed. Near term technologies to improve the Army's capability to detect microorganisms would appear to be essentially improvements in versatility and measurement of coliform indicator organisms. New chromogenic and fluorogenic indicator substances associated with new substrates appear to be best suited for test kit developmentmore » either for quantitative membrane filter tests or presence/absence and multiple fermentation tests. Test times, incubator requirements, and operator involvement appear to be similar to older technologies. Long term development would appear to favor such technologies as genetic probes with amplification of the hydridized nucleic acid materials of positive samples, and some immunological based systems such as enzyme linked, immuno-sorbent assays. In both cases, the major problems would appear to be sample preparation and development of signal strengths from the reactions which would allow the user to see results in 1 hour.« less

Hydrogen sensors based on catalytic metals

NASA Astrophysics Data System (ADS)

Beklemyshev, V. I.; Berezine, V.; Bykov, Victor A.; Kiselev, L.; Makhonin, I.; Pevgov, V.; Pustovoy, V.; Semynov, A.; Sencov, Y.; Shkuropat, I.; Shokin, A.

1999-11-01

On the base of microelectronical and micromechanical technology were designed and developed converters of hydrogen concentration to electrical signals. The devices of controlling concentration of hydrogen in the air were developed. These devices were applied for ensuring fire and explosion security of complex technological teste of missile oxygen-hydrogen engine, developed for cryogenic accelerations block. The sensor block of such device was installed directly on the armor-plate, to which was attached tested engine.

The development and technology transfer of software engineering technology at NASA. Johnson Space Center

NASA Technical Reports Server (NTRS)

Pitman, C. L.; Erb, D. M.; Izygon, M. E.; Fridge, E. M., III; Roush, G. B.; Braley, D. M.; Savely, R. T.

1992-01-01

The United State's big space projects of the next decades, such as Space Station and the Human Exploration Initiative, will need the development of many millions of lines of mission critical software. NASA-Johnson (JSC) is identifying and developing some of the Computer Aided Software Engineering (CASE) technology that NASA will need to build these future software systems. The goal is to improve the quality and the productivity of large software development projects. New trends are outlined in CASE technology and how the Software Technology Branch (STB) at JSC is endeavoring to provide some of these CASE solutions for NASA is described. Key software technology components include knowledge-based systems, software reusability, user interface technology, reengineering environments, management systems for the software development process, software cost models, repository technology, and open, integrated CASE environment frameworks. The paper presents the status and long-term expectations for CASE products. The STB's Reengineering Application Project (REAP), Advanced Software Development Workstation (ASDW) project, and software development cost model (COSTMODL) project are then discussed. Some of the general difficulties of technology transfer are introduced, and a process developed by STB for CASE technology insertion is described.

Enhancing emergency care in low-income countries using mobile technology-based training tools.

PubMed

Edgcombe, Hilary; Paton, Chris; English, Mike

2016-12-01

In this paper, we discuss the role of mobile technology in developing training tools for health workers, with particular reference to low-income countries (LICs). The global and technological context is outlined, followed by a summary of approaches to using and evaluating mobile technology for learning in healthcare. Finally, recommendations are made for those developing and using such tools, based on current literature and the authors' involvement in the field. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Geospatial information technology: an adjunct to service-based outreach and education.

PubMed

Faruque, Fazlay; Hewlett, Peggy O; Wyatt, Sharon; Wilson, Kaye; Lofton, Susan; Frate, Dennis; Gunn, Jennie

2004-02-01

This exemplar highlights how geospatial information technology was effective in supporting academic practice, faculty outreach, and education initiatives at the University of Mississippi School of Nursing. Using this cutting-edge technology created a community-based prototype for fully integrating point-of-service research, practice, and academics into a cohesive strategy to influence change within the health care delivery system. This exemplar discusses ways this knowledge benefits practice and curriculum development; informs critical decision making affecting the people we serve; underscores the vital role nurses play in linking this technology to practice; and develops community residents as partners in their own health and that of the community.

Technology and testing.

PubMed

Quellmalz, Edys S; Pellegrino, James W

2009-01-02

Large-scale testing of educational outcomes benefits already from technological applications that address logistics such as development, administration, and scoring of tests, as well as reporting of results. Innovative applications of technology also provide rich, authentic tasks that challenge the sorts of integrated knowledge, critical thinking, and problem solving seldom well addressed in paper-based tests. Such tasks can be used on both large-scale and classroom-based assessments. Balanced assessment systems can be developed that integrate curriculum-embedded, benchmark, and summative assessments across classroom, district, state, national, and international levels. We discuss here the potential of technology to launch a new era of integrated, learning-centered assessment systems.

WE-A-18C-01: Emerging and Innovative Ultrasound Technology in Diagnosis and Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Emelianov, S; Oraevsky, A; Stafford, R

The application of new ultrasound-based technologies in medicine has expanded in recent years. One area of rapid growth has been the combination of ultrasound with other methods of image generation and imaging modalities to produce hybrid approaches for diagnostic imaging and noninvasive therapeutic intervention. The presentations associated with this session will provide an overview of two emerging technologies that are currently being developed and implemented to enhance ultrasound-related diagnostic imaging and therapy: the utilization of optically-induced ultrasound imaging (optoacoustic / photoacoustic imaging) and the use of magnetic resonance imaging to guide the use of high-intensity focused ultrasound for therapeutic applications.more » Learning Objectives: Develop a general understanding of the underlying technologies associated with optoacoustic / photoacoustic tomography and MRguided high-intensity focused ultrasound. Develop an understanding of the current methods of these new ultrasound-based technologies in preclinical research and clinical applications.« less

Current State and Model for Development of Technology-Based Care for Attention Deficit Hyperactivity Disorder

PubMed Central

Riley, Steven J.; Calub, Catrina A.; Schweitzer, Julie B.

2016-01-01

Abstract Introduction: Care (i.e., evaluation and intervention) delivered through technology is used in many areas of mental health services, including for persons with attention deficit hyperactivity disorder (ADHD). Technology can facilitate care for individuals with ADHD, their parents, and their care providers. The adoption of technological tools for ADHD care requires evidence-based studies to support the transition from development to integration into use in the home, school, or work for persons with the disorder. The initial phase, which is development of technological tools, has begun in earnest; however, the evidence base for many of these tools is lacking. In some instances, the uptake of a piece of technology into home use or clinical practice may be further along than the research to support its use. Methods: In this study, we review the current evidence regarding technology for ADHD and also propose a model to evaluate the support for other tools that have yet to be tested. Results: We propose using the Research Domain Criteria as a framework for evaluating the tools' relationships to dimensions related to ADHD. Conclusion: This article concludes with recommendations for testing new tools that may have promise in improving the evaluation or treatment of persons with ADHD. PMID:26985703

A Systems Approach to Technology Education.

ERIC Educational Resources Information Center

Hacker, Michael; Barden, Robert

1983-01-01

Provides a brief history of industrial arts curriculum development, a rationale for a technology-based study of industrial arts, and the use of a systems view in understanding and interpreting technology. (SK)

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2014-01-01

This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

Practical guidelines for development of web-based interventions.

PubMed

Chee, Wonshik; Lee, Yaelim; Chee, Eunice; Im, Eun-Ok

2014-10-01

Despite a recent high funding priority on technological aspects of research and a high potential impact of Web-based interventions on health, few guidelines for the development of Web-based interventions are currently available. In this article, we propose practical guidelines for development of Web-based interventions based on an empirical study and an integrative literature review. The empirical study aimed at development of a Web-based physical activity promotion program that was specifically tailored to Korean American midlife women. The literature review included a total of 202 articles that were retrieved through multiple databases. On the basis of the findings of the study and the literature review, we propose directions for development of Web-based interventions in the following steps: (1) meaningfulness and effectiveness, (2) target population, (3) theoretical basis/program theory, (4) focus and objectives, (5) components, (6) technological aspects, and (7) logistics for users. The guidelines could help promote further development of Web-based interventions at this early stage of Web-based interventions in nursing.

Illuminating the gateway of gene silencing: perspective of RNA interference technology in clinical therapeutics.

PubMed

Sindhu, Annu; Arora, Pooja; Chaudhury, Ashok

2012-07-01

A novel laboratory revolution for disease therapy, the RNA interference (RNAi) technology, has adopted a new era of molecular research as the next generation "Gene-targeted prophylaxis." In this review, we have focused on the chief technological challenges associated with the efforts to develop RNAi-based therapeutics that may guide the biomedical researchers. Many non-curable maladies, like neurodegenerative diseases and cancers have effectively been cured using this technology. Rapid advances are still in progress for the development of RNAi-based technologies that will be having a major impact on medical research. We have highlighted the recent discoveries associated with the phenomenon of RNAi, expression of silencing molecules in mammals along with the vector systems used for disease therapeutics.

Training Teachers to Use Technology and Inquiry-based Learning Practices in the Geosciences through an Industry-University Partnership

NASA Astrophysics Data System (ADS)

McNeal, K.; Buell, R.; Eiland, L.

2009-12-01

Teacher professional development centered about the Geosciences is necessary in order to train K-12 teachers about this science field and to effectively educate K-12 students about Earth processes. The partnership of industries, universities, and K-12 schools is a collaborative pathway to support these efforts by providing teachers access to technology, inquiry-based learning, and authentic field experiences within the Geosciences context. This research presents the results of Project SMARTER (Science and Mathematics Advancement and Reform utilizing Technology and Enhanced Resources), a co-lead industry-university partnership and teacher professional development workshop program that focused on technology and inquiry-based learning in the Geosciences. The workshop included fifteen teachers from five distressed counties in Mississippi as defined by the Appalachian Regional Commission. Three (one science, once math, one technology) 7-12 grade teachers were selected from each school district and worked together during activities as a team to foster a cooperative learning experience. The two week workshop trained teachers on the use of a variety of technologies including: Vernier Probes and software, TI-calculators and presenter, Mimio Boards, GPS receivers, Google Earth, Excel, PowerPoint, projectors, and the use of historic geologic datasets. Furthermore, teachers were trained on proper field collection techniques, the use of Hach Kits and field probes, and the interpretation of geologic data. Each daily program incorporated the use of technology-rich and inquiry-based activities into one of the five Earth spheres: atmosphere, lithosphere, biosphere, hydrosphere, and anthrosphere. Results from the pre-post technology attitude survey showed that participating teachers significantly (p < 0.05) increased their confidence level in using technology. Furthermore, all participants self-reflected that the workshop both increased their interest in the Geosciences and their plans to integrate technology in future classroom activities. Qualitative responses from daily feedback forms and journal entries indicated that participating teachers were enthusiastic about inquiry-, technology-, and field-based learning activities and were willing to incorporate cross-discipline lesson plans. Evaluation of final lesson plans developed by the teachers during the workshop combined with follow-up classroom visits illustrated that the teachers appropriately developed classroom lessons to incorporate inquiry and technology and that they successfully implemented these lesson plans in their own classroom as a direct result of participating in workshop activities.

Technologies for space station autonomy

NASA Technical Reports Server (NTRS)

Staehle, R. L.

1984-01-01

This report presents an informal survey of experts in the field of spacecraft automation, with recommendations for which technologies should be given the greatest development attention for implementation on the initial 1990's NASA Space Station. The recommendations implemented an autonomy philosophy that was developed by the Concept Development Group's Autonomy Working Group during 1983. They were based on assessments of the technologies' likely maturity by 1987, and of their impact on recurring costs, non-recurring costs, and productivity. The three technology areas recommended for programmatic emphasis were: (1) artificial intelligence expert (knowledge based) systems and processors; (2) fault tolerant computing; and (3) high order (procedure oriented) computer languages. This report also describes other elements required for Station autonomy, including technologies for later implementation, system evolvability, and management attitudes and goals. The cost impact of various technologies is treated qualitatively, and some cases in which both the recurring and nonrecurring costs might be reduced while the crew productivity is increased, are also considered. Strong programmatic emphasis on life cycle cost and productivity is recommended.

A Wearable Textile 2D Touchpad Sensor Based on Screen-Printing Technology.

PubMed

Ferri, Josue; Lidón-Roger, Jose Vicente; Moreno, Jorge; Martinez, Gabriel; Garcia-Breijo, Eduardo

2017-12-20

Among many of the designs used in the detection of 2D gestures for portable technology, the touchpad is one of the most complex and with more functions to implement. Its development has undergone a great push due to its use in displays, but it is not widely used with other technologies. Its application on textiles could allow a wide range of applications in the field of medicine, sports, etc. Obtaining a flexible, robust touchpad with good response and low cost is one of the objectives of this work. A textile touchpad based on a diamond pattern design using screen printing technology has been developed. This technology is widely used in the textile industry and therefore does not require heavy investments. The developed prototypes were analyzed using a particular controller for projected capacitive technologies (pro-cap), which is the most used in gesture detection. Two different designs were used to obtain the best configuration, obtaining a good result in both cases.

A Wearable Textile 2D Touchpad Sensor Based on Screen-Printing Technology

PubMed Central

Ferri, Josue; Moreno, Jorge; Martinez, Gabriel

2017-01-01

Among many of the designs used in the detection of 2D gestures for portable technology, the touchpad is one of the most complex and with more functions to implement. Its development has undergone a great push due to its use in displays, but it is not widely used with other technologies. Its application on textiles could allow a wide range of applications in the field of medicine, sports, etc. Obtaining a flexible, robust touchpad with good response and low cost is one of the objectives of this work. A textile touchpad based on a diamond pattern design using screen printing technology has been developed. This technology is widely used in the textile industry and therefore does not require heavy investments. The developed prototypes were analyzed using a particular controller for projected capacitive technologies (pro-cap), which is the most used in gesture detection. Two different designs were used to obtain the best configuration, obtaining a good result in both cases. PMID:29261167

Development of Reading Comprehension Skills among Students with Intellectual Disabilities Using Technologically-Based Reading Programs

ERIC Educational Resources Information Center

Macklin, Ella M.

2016-01-01

This research paper reported the results from research conducted regarding technologically-based reading comprehension programs for students who have intellectual disabilities. It provided evidence-based research and theoretical bases for learning (i.e. Zone of Generativity, Constructivism, Self-Efficacy) on the issue of these students not being…

Applications of aerospace technology in industry, a technology transfer profile: Contamination control

NASA Technical Reports Server (NTRS)

1971-01-01

The strong influence NASA-sponsored research has had on the development of solutions to difficult contamination problems is considered. The contamination control field is comprised of an industrial base, supplying the tools of control; a user base, adopting control techniques; and a technical base, expanding the concepts of control. Both formal and informal mechanisms used by NASA to communicate a variety of technical advances are reviewed and certain examples of the expansion of the user base through technology transfer are given. Issues related to transfer of NASA-generated contamination control technology are emphasized.

The Strategic Technologies for Automation and Robotics (STEAR) program: Protection of materials in the space environment subprogram

NASA Technical Reports Server (NTRS)

Schmidt, Lorne R.; Francoeur, J.; Aguero, Alina; Wertheimer, Michael R.; Klemberg-Sapieha, J. E.; Martinu, L.; Blezius, J. W.; Oliver, M.; Singh, A.

1995-01-01

Three projects are currently underway for the development of new coatings for the protection of materials in the space environment. These coatings are based on vacuum deposition technologies. The projects will go as far as the proof-of-concept stage when the commercial potential for the technology will be demonstrated on pilot-scale fabrication facilities in 1996. These projects are part of a subprogram to develop supporting technologies for automation and robotics technologies being developed under the Canadian Space Agency's STEAR Program, part of the Canadian Space Station Program.

Space Station Engineering and Technology Development. Proceedings of the Panel on Solar Thermodynamics Research and Technology Development, July 31, 1985

NASA Technical Reports Server (NTRS)

1985-01-01

Solar thermodynamics research and technology is reported. Comments on current program activity and future plans with regard to satisfying potential space station electric power generation requirements are provided. The proceedings contain a brief synopsis of the presentations to the panel, including panel comments, and a summary of the panel's observations. Selected presentation material is appended. Onboard maintainability and repair in space research and technology plan, solar thermodynamic research, program performance, onboard U.S. ground based mission control, and technology development rad maps from 10 C to the growth station are addressed.

Training for New Manufacturing Technologies.

ERIC Educational Resources Information Center

Jacobs, James

1988-01-01

Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

Vector-based genetically modified vaccines: Exploiting Jenner's legacy.

PubMed

Ramezanpour, Bahar; Haan, Ingrid; Osterhaus, Ab; Claassen, Eric

2016-12-07

The global vaccine market is diverse while facing a plethora of novel developments. Genetic modification (GM) techniques facilitate the design of 'smarter' vaccines. For many of the major infectious diseases of humans, like AIDS and malaria, but also for most human neoplastic disorders, still no vaccines are available. It may be speculated that novel GM technologies will significantly contribute to their development. While a promising number of studies is conducted on GM vaccines and GM vaccine technologies, the contribution of GM technology to newly introduced vaccines on the market is disappointingly limited. In this study, the field of vector-based GM vaccines is explored. Data on currently available, actually applied, and newly developed vectors is retrieved from various sources, synthesised and analysed, in order to provide an overview on the use of vector-based technology in the field of GM vaccine development. While still there are only two vector-based vaccines on the human vaccine market, there is ample activity in the fields of patenting, preclinical research, and different stages of clinical research. Results of this study revealed that vector-based vaccines comprise a significant part of all GM vaccines in the pipeline. This study further highlights that poxviruses and adenoviruses are among the most prominent vectors in GM vaccine development. After the approval of the first vectored human vaccine, based on a flavivirus vector, vaccine vector technology, especially based on poxviruses and adenoviruses, holds great promise for future vaccine development. It may lead to cheaper methods for the production of safe vaccines against diseases for which no or less perfect vaccines exist today, thus catering for an unmet medical need. After the introduction of Jenner's vaccinia virus as the first vaccine more than two centuries ago, which eventually led to the recent eradication of smallpox, this and other viruses may now be the basis for constructing vectors that may help us control other major scourges of mankind. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Building a Conversation: Preservice Teachers' Use of Video as Data for Making Evidence Based Arguments About Practice

ERIC Educational Resources Information Center

McDonald, Scott

2010-01-01

For decades teacher educators have used video to support developing preservice teachers, but new technologies open the possibility of a much more dynamic and real-time use for video of teaching. This article describes an initial attempt to leverage these technologies to develop a teacher learning community focused on evidence-based arguments about…

Research on Distance Education Development in China

ERIC Educational Resources Information Center

Xin, Ding; Jian, Niu; Yanhui, Han

2010-01-01

Distance education is among the significant fields for the application of educational technology. Distance education in China has gone through three phases, namely: correspondence-based education, radio and TV-based education and online education. This paper was based on educational technology application, and the historical, dialectic and…

[Development strategy of Paris based on combination of domestic patent and current resource application and development].

PubMed

Zhao, Fei-Ya; Tao, Ai-En; Xia, Cong-Long

2018-01-01

Paris is a commonly used traditional Chinese medicine (TCM), and has antitumor, antibacterial, sedative, analgesic and hemostatic effects. It has been used as an ingredient of 81 Chinese patent medicines, with a wide application and large market demand. Based on the data retrieved from state Intellectual Property Office patent database, a comprehensive analysis was made on Paris patents, so as to explore the current features of Paris patents in the aspects of domestic patent output, development trend, technology field distribution, time dimension, technology growth rate and patent applicant, and reveal the development trend of China's Paris industry. In addition, based on the current Paris resource application and development, a sustainable, multi-channel and multi-level industrial development approach was built. According to the results, studies of Paris in China are at the rapid development period, with a good development trend. However, because wild Paris resources tend to be exhausted, the studies for artificial cultivation technology should be strengthened to promote the industrial development. Copyright© by the Chinese Pharmaceutical Association.

Technology-Based Communication and the Development of Interpersonal Competencies Within Adolescent Romantic Relationships: A Preliminary Investigation.

PubMed

Nesi, Jacqueline; Widman, Laura; Choukas-Bradley, Sophia; Prinstein, Mitchell J

2017-06-01

This study investigated longitudinal associations between adolescents' technology-based communication and the development of interpersonal competencies within romantic relationships. A school-based sample of 487 adolescents (58% girls; M age  = 14.1) participated at two time points, one year apart. Participants reported (1) proportions of daily communication with romantic partners via traditional modes (in person, on the phone) versus technological modes (text messaging, social networking sites) and (2) competence in the romantic relationship skill domains of negative assertion and conflict management. Results of cross-lagged panel models indicated that adolescents who engaged in greater proportions of technology-based communication with romantic partners reported lower levels of interpersonal competencies one year later, but not vice versa; associations were particularly strong for boys. © 2016 The Authors. Journal of Research on Adolescence © 2016 Society for Research on Adolescence.

New technology for food systems and security.

PubMed

Yau, N J Newton

2009-01-01

In addition to product trade, technology trade has become one of the alternatives for globalization action around the world. Although not all technologies employed on the technology trade platform are innovative technologies, the data base of international technology trade still is a good indicator for observing innovative technologies around world. The technology trade data base from Sinew Consulting Group (SCG) Ltd. was employed as an example to lead the discussion on security or safety issues that may be caused by these innovative technologies. More technologies related to processing, functional ingredients and quality control technology of food were found in the data base of international technology trade platform. The review was conducted by categorizing technologies into the following subcategories in terms of safety and security issues: (1) agricultural materials/ingredients, (2) processing/engineering, (3) additives, (4) packaging/logistics, (5) functional ingredients, (6) miscellaneous (include detection technology). The author discusses examples listed for each subcategory, including GMO technology, nanotechnology, Chinese medicine based functional ingredients, as well as several innovative technologies. Currently, generation of innovative technology advance at a greater pace due to cross-area research and development activities. At the same time, more attention needs to be placed on the employment of these innovative technologies.

Toward Technology Integration in Mathematics Education: A Technology-Integration Course Planning Assignment

ERIC Educational Resources Information Center

Kersaint, Gladis

2007-01-01

This article describes a technology integration course planning assignment that was developed to enhance preservice teachers' technological pedagogical content knowledge (TPCK). This assignment required preservice teachers work with peers to integrate various technological tools (e.g., graphing calculators, web-based mathematics applets, etc) in a…

Gender-Based Motivational Differences in Technology Education

ERIC Educational Resources Information Center

Virtanen, Sonja; Räikkönen, Eija; Ikonen, Pasi

2015-01-01

Because of a deeply gendered history of craft education in Finland, technology education has a strong gender-related dependence. In order to motivate girls into pursuing technological studies and to enable them to see their own potential in technology, gender sensitive approaches should be developed in technology education. This study explores…

NASA space station automation: AI-based technology review. Executive summary

NASA Technical Reports Server (NTRS)

Firschein, O.; Georgeff, M. P.; Park, W.; Cheeseman, P. C.; Goldberg, J.; Neumann, P.; Kautz, W. H.; Levitt, K. N.; Rom, R. J.; Poggio, A. A.

1985-01-01

Research and Development projects in automation technology for the Space Station are described. Artificial Intelligence (AI) based technologies are planned to enhance crew safety through reduced need for EVA, increase crew productivity through the reduction of routine operations, increase space station autonomy, and augment space station capability through the use of teleoperation and robotics.

Technological Support and Problem-Based Learning as a Means of Formation of Student's Creative Experience

ERIC Educational Resources Information Center

Cakula, Sarma

2011-01-01

Problem-based learning and technology support for students in higher education investigates the new perspectives of education in connection with the change of life paradigm. The present research seeks to find out what study methods and technology support can be used for developing students' creative experience in the context of education for…

Integration of Digital Technologies into Play-Based Pedagogy in Kuwaiti Early Childhood Education: Teachers' Views, Attitudes and Aptitudes

ERIC Educational Resources Information Center

Aldhafeeri, Fayiz; Palaiologou, Ioanna; Folorunsho, Aderonke

2016-01-01

Scholars in the field of early childhood education are still debating the inclusion of digital technologies in play-based pedagogy and our understanding of digital play in early childhood education is still developing. This research paper examines early childhood education teachers' views, aptitudes and attitudes towards digital technologies in…

The CMETS Program: Grounding Middle Grade Mathematics and Technology Professional Development in Research-Based Best Practice

ERIC Educational Resources Information Center

Guerrero, Shannon; Dugdale, Sharon

2009-01-01

The past few decades have seen middle school teachers in the United States hit especially hard by contradictory messages about the use and importance of technology in support of their standards-based mathematics teaching. This paper considers this dichotomy with respect to the California Mathematics Education Technology Site (CMETS), a…

Choose to Use: Scaffolding for Technology Learning Needs in a Project-Based Learning Environment

ERIC Educational Resources Information Center

Weimer, Peggy D.

2017-01-01

Project-based learning is one approach used by teachers to meet the challenge of developing more technologically proficient students. This approach, however, requires students to manage a large number of tasks including the mastery of technology. If a student's perception that their capability to perform a task falls below the task's difficulty,…

Problem Based Learning in Design and Technology Education Supported by Hypermedia-Based Environments

ERIC Educational Resources Information Center

Page, Tom; Lehtonen, Miika

2006-01-01

Audio-visual advances in virtual reality (VR) technology have given rise to innovative new ways to teach and learn. However, so far teaching and learning processes have been technologically driven as opposed to pedagogically led. This paper identifies the development of a pedagogical model and its application for teaching, studying and learning…

Technological advances in precision medicine and drug development.

PubMed

Maggi, Elaine; Patterson, Nicole E; Montagna, Cristina

New technologies are rapidly becoming available to expand the arsenal of tools accessible for precision medicine and to support the development of new therapeutics. Advances in liquid biopsies, which analyze cells, DNA, RNA, proteins, or vesicles isolated from the blood, have gained particular interest for their uses in acquiring information reflecting the biology of tumors and metastatic tissues. Through advancements in DNA sequencing that have merged unprecedented accuracy with affordable cost, personalized treatments based on genetic variations are becoming a real possibility. Extraordinary progress has been achieved in the development of biological therapies aimed to even further advance personalized treatments. We provide a summary of current and future applications of blood based liquid biopsies and how new technologies are utilized for the development of biological therapeutic treatments. We discuss current and future sequencing methods with an emphasis on how technological advances will support the progress in the field of precision medicine.

Technologies for utilizing natural resources create new job opportunities in the geosciences in developing countries

NASA Astrophysics Data System (ADS)

Aswathanarayana, U.

Water, soils, minerals, and biota constitute a community's most significant natural resources. Innovations in technology are generating new jobs in converting into a resource what was yesterday a non-resource; in developing process and control technologies to minimize wastes; and in waste recycling.“Resources are not, they become,” in the words of Zimmerman. In the case of the developing countries, the technologies of choice have not only to be ecologically sustainable and economically viable, but more importantly, employment generating. The new kinds of jobs—for example, in poverty alleviation projects via micro-enterprises based on value-added processing of natural resources—have a strong environmental relevance and tend to lie at the interface of several traditional scientific disciplines. Geoscience graduates in the developing countries are best placed to take advantage of these new job opportunities involving Earth materials, but only if they are exposed to broad-based geoscience instruction.

Overview of Stirling Technology Research at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2016-01-01

Stirling Radioisotope Power Systems (RPSs) are under development to provide power on future space science missions where robotic spacecraft will orbit, fly by, land, or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. NASA Glenn Research Center's newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability and system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

Overview of Stirling Technology Research at NASA Glenn Research Center

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Schifer, Nicholas A.; Williams, Zachary D.; Metscher, Jonathan F.

2015-01-01

Stirling Radioisotope Power Systems (RPS) are under development to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove using less than a quarter of the plutonium the currently available RPS uses to produce about the same power. Glenn Research Center's (GRC's) newly formulated Stirling Cycle Technology Development Project (SCTDP) continues development of Stirling-based systems and subsystems, which include a flight-like generator and related housing assembly, controller, and convertors. The project also develops less mature technologies under Stirling Technology Research, with a focus on demonstration in representative environments to increase the technology readiness level (TRL). Matured technologies are evaluated for selection in future generator designs. Stirling Technology Research tasks focus on a wide variety of objectives, including increasing temperature capability to enable new environments, reducing generator mass and/or size, improving reliability or system fault tolerance, and developing alternative designs. The task objectives and status are summarized.

Fused deposition of ceramics: A comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design

NASA Astrophysics Data System (ADS)

Bellini, Anna

Customer-driven product customization and continued demand for cost and time savings have generated a renewed interest in agile manufacturing based on improvements on Rapid Prototyping (RP) technologies. The advantages of RP technologies are: (1) ability to shorten the product design and development time, (2) suitability for automation and decrease in the level of human intervention, (3) ability to build many geometrically complex shapes. A shift from "prototyping" to "manufacturing" necessitates the following improvements: (1) Flexibility in choice of materials; (2) Part integrity and built-in characteristics to meet performance requirements; (3) Dimensional stability and tolerances; (4) Improved surface finish. A project funded by ONR has been undertaken to develop an agile manufacturing technology for fabrication of ceramic and multi-component parts to meet various needs of the Navy, such as transducers, etc. The project is based on adaptation of a layered manufacturing concept since the program required that the new technology be developed based on a commercially available RP technology. Among various RP technologies available today, Fused Deposition Modeling (FDM) has been identified as the focus of this research because of its potential versatility in the choice of materials and deposition configuration. This innovative approach allows for designing and implementing highly complex internal architectures into parts through deposition of different materials in a variety of configurations in such a way that the finished product exhibit characteristics to meet the performance requirements. This implies that, in principle, one can tailor-make the assemble of materials and structures as per specifications of an optimum design. The program objectives can be achieved only through accurate process modeling and modeling of material behavior. Oftentimes, process modeling is based on some type of computational approach where as modeling of material behavior is based on extensive experimental investigations. Studies are conducted in the following categories: (1) Flow modeling during extrusion and deposition; (2) Thermal modeling; (3) Flow control during deposition; (4) Product characterization and property determination for dimensional analysis; (5) Development of a novel technology based on a mini-extrusion system. Studies in each of these stages have involved experimental as well as analytical approaches to develop a comprehensive modeling.

Interactive learning and action: realizing the promise of synthetic biology for global health.

PubMed

Betten, A Wieke; Roelofsen, Anneloes; Broerse, Jacqueline E W

2013-09-01

The emerging field of synthetic biology has the potential to improve global health. For example, synthetic biology could contribute to efforts at vaccine development in a context in which vaccines and immunization have been identified by the international community as being crucial to international development efforts and, in particular, the millennium development goals. However, past experience with innovations shows that realizing a technology's potential can be difficult and complex. To achieve better societal embedding of synthetic biology and to make sure it reaches its potential, science and technology development should be made more inclusive and interactive. Responsible research and innovation is based on the premise that a broad range of stakeholders with different views, needs and ideas should have a voice in the technological development and deployment process. The interactive learning and action (ILA) approach has been developed as a methodology to bring societal stakeholders into a science and technology development process. This paper proposes an ILA in five phases for an international effort, with national case studies, to develop socially robust applications of synthetic biology for global health, based on the example of vaccine development. The design is based on results of a recently initiated ILA project on synthetic biology; results from other interactive initiatives described in the literature; and examples of possible applications of synthetic biology for global health that are currently being developed.

Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

PubMed

Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

2016-01-01

The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

HTS machines as enabling technology for all-electric airborne vehicles

NASA Astrophysics Data System (ADS)

Masson, P. J.; Brown, G. V.; Soban, D. S.; Luongo, C. A.

2007-08-01

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.

Development document for final best conventional technology effluent limitations guidelines for the pharmaceutical manufacturing point source category. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Farrell, T.; Hund, F.

1986-12-01

The document presents the technical rationale for best conventional technology (BCI) effluent limitations guidelines for the pharmaceutical manufacturing point-source category as required by the Clean Water Act of 1977 (P.L. 95-217, the Act). The document describes the technologies considered as the bases for BCT limitations. Section II of this document summarizes the rulemaking process. Sections III through V describe the technical data and engineering analyses used to develop the regulatory technology options. The costs and removals associated with each technology option for each plant and the application of the BCT cost test methodology are presented in Section VI. BCI limitationsmore » bases on the best conventional pollutant control technology are to be achieved by existing direct-discharging facilities.« less

Status of Sample Return Propulsion Technology Development Under NASA's ISPT Program

NASA Technical Reports Server (NTRS)

Anderson, David J.; Glaab, Louis J.; Munk, Michelle M.; Pencil, Eric; Dankanich, John; Peterson, Todd T.

2012-01-01

The In-Space Propulsion Technology (ISPT) program was tasked in 2009 to start development of propulsion technologies that would enable future sample return missions. ISPT s sample return technology development areas are diverse. Sample Return Propulsion (SRP) addresses electric propulsion for sample return and low cost Discovery-class missions, propulsion systems for Earth Return Vehicles (ERV) including transfer stages to the destination, and low technology readiness level (TRL) advanced propulsion technologies. The SRP effort continues work on HIVHAC thruster development to transition into developing a Hall-effect propulsion system for sample return (ERV and transfer stages) and low-cost missions. Previous work on the lightweight propellant-tanks continues for sample return with direct applicability to a Mars Sample Return (MSR) mission with general applicability to all future planetary spacecraft. The Earth Entry Vehicle (EEV) work focuses on building a fundamental base of multi-mission technologies for Earth Entry Vehicles (MMEEV). The main focus of the Planetary Ascent Vehicles (PAV) area is technology development for the Mars Ascent Vehicle (MAV), which builds upon and leverages the past MAV analysis and technology developments from the Mars Technology Program (MTP) and previous MSR studies

Enabling technologies for transition to utilization of space-based resources and operations

NASA Technical Reports Server (NTRS)

Sadin, S. R.; Litty, J. D.

1985-01-01

This article explores a potential scenario for the further development of space infrastructure resources and operations management. It is a scenario that transitions from the current ground-based system to an architecture that is predominantly space-based by exploiting key mission systems in an operational support role. If this view is accurate, an examination of the range of potential infrastructure elements and how they might interact in a maximally productive space-based operations complex is needed, innovative technologies beyond the current Shuttle and Space Station legacy need to be identified, and research programs pursued. Development of technologies within the areas of telerobotics, machine autonomy, human autonomy, in-space manufacturing and construction, propulsion and energy is discussed.

Bringing the Community Along: A Case Study of a School District's Information Technology Rural Development Initiative

ERIC Educational Resources Information Center

Schafft, Kai A.; Alter, Theodore R.; Bridger, Jeffrey C.

2006-01-01

We draw on interactional community theory to analyze the relationship between information technology and local development through a case study of a geographically isolated and economically disadvantaged rural school district. This district has used state-of-the-art information technology infrastructure in a broad-based community and economic…

Development of a Scale to Explore Technology Literacy Skills of Turkish 8th Graders

ERIC Educational Resources Information Center

Misirli, Zeynel A.; Akbulut, Yavuz

2013-01-01

The use of emerging technologies shape learners' knowledge creation and transformation processes. In this regard, this study aimed to develop a scale to investigate 8 th graders' competencies regarding the educational technology standards based on ISTE-NETS. After a review of relevant literature, an item pool was prepared. The pool was improved…

Space station high gain antenna concept definition and technology development

NASA Technical Reports Server (NTRS)

Wade, W. D.

1972-01-01

The layout of a technology base is reported from which a mechanically gimballed, directional antenna can be developed to support a manned space station proposed for the late 1970's. The effort includes the concept definition for the antenna assembly, an evaluation of available technology, the design of critical subassemblies and the design of critical subassembly tests.

Students' Experiences and Expectations of Technologies: An Australian Study Designed to Inform Planning and Development Decisions

ERIC Educational Resources Information Center

Gosper, Maree; Malfroy, Janne; McKenzie, Jo

2013-01-01

The pace of technological change accompanied by an evolution in social, work-based and study behaviours and norms poses particular challenges for universities as they strive to develop high quality and sustainable technology-rich learning environments. Maintaining currency with the latest advances is resource intensive, hence the costs incurred in…

A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

ERIC Educational Resources Information Center

Hacker, Michael

1982-01-01

Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

Chemical Gas Sensors for Aeronautic and Space Applications 2

NASA Technical Reports Server (NTRS)

Hunter, Gary W.; Chen, Liong-Yu; Neudeck, Phil G.; Knight, Dale; Liu, C. C.; Wu, Q. H.; Zhou, H. J.; Makel, Darby; Liu, M.; Rauch, W. A.

1998-01-01

Aeronautic and space applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. Areas of interest include launch vehicle safety monitoring, emission monitoring, and fire detection. This paper discusses the needs of aeronautic and space applications and the point-contact sensor technology being developed to address these needs. The development of these sensors is based on progress in two types of technology: 1) Micromachining and microfabrication technology to fabricate miniaturized sensors. 2) The development of high temperature semiconductors, especially silicon carbide. Sensor development for each application involves its own challenges in the fields of materials science and fabrication technology. The number of dual-use commercial applications of this microfabricated gas sensor technology make this area of sensor development a field of significant interest.

Chemical Gas Sensors for Aeronautics and Space Applications III

NASA Technical Reports Server (NTRS)

Hunter, G. W.; Neudeck, P. G.; Chen, L. Y.; Liu, C. C.; Wu, Q. H.; Sawayda, M. S.; Jin, Z.; Hammond, J.; Makel, D.; Liu, M.;

Chemical Gas Sensors for Aeronautic and Space Applications 2

NASA Technical Reports Server (NTRS)

Hunter, G. W.; Chen, L. Y.; Neudeck, P. G.; Knight, D.; Liu, C. C.; Wu, Q. H.; Zhou, H. J.; Makel, D.; Liu, M.; Rauch, W. A.

1998-01-01

Aeronautic and Space applications require the development of chemical sensors with capabilities beyond those of commercially available sensors. Areas of most interest include launch vehicle safety monitoring emission monitoring and fire detection. This paper discusses the needs of aeronautic and space applications and the point-contact sensor technology being developed to address these needs. The development of these sensor is based on progress two types of technology: 1) Micro-machining and micro-fabrication technology to fabricate miniaturized sensors. 2) The development of high temperature semiconductors, especially silicon carbide. Sensor development for each application involves its own challenges in the fields of materials science and fabrication technology. The number of dual-use commercial applications of this micro-fabricated gas sensor technology make this area of sensor development a field of significant interest.

Ceramic Technology For Advanced Heat Engines Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-12-01

Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. The objective of the project is to develop the industrial technology base required for reliable ceramicsmore » for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. This advanced materials technology is being developed in parallel and close coordination with the ongoing DOE and industry proof of concept engine development programs. To facilitate the rapid transfer of this technology to U.S. industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. Abstracts prepared for appropriate papers.« less

Space-based solar power conversion and delivery systems study. Volume 3: Economic analysis of space-based solar power systems

NASA Technical Reports Server (NTRS)

Hazelrigg, G. A., Jr.

1976-01-01

A variety of economic and programmatic issues are discussed concerning the development and deployment of a fleet of space-based solar power satellites (SSPS). The costs, uncertainties and risks associated with the current photovoltaic SSPS configuration, and with issues affecting the development of an economically viable SSPS development program are analyzed. The desirability of a low earth orbit (LEO) demonstration satellite and a geosynchronous (GEO) pilot satellite is examined and critical technology areas are identified. In addition, a preliminary examination of utility interface issues is reported. The main focus of the effort reported is the development of SSPS unit production, and operation and maintenance cost models suitable for incorporation into a risk assessment (Monte Carlo) model (RAM). It is shown that the key technology area deals with the productivity of man in space, not, as might be expected, with some hardware component technology.

Administering a Web-Based Course on Database Technology

ERIC Educational Resources Information Center

de Oliveira, Leonardo Rocha; Cortimiglia, Marcelo; Marques, Luis Fernando Moraes

2003-01-01

This article presents a managerial experience with a web-based course on data base technology for enterprise management. The course has been developed and managed by a Department of Industrial Engineering in Brazil in a Public University. Project's managerial experiences are described covering its conception stage where the Virtual Learning…

Ontology-Based Multimedia Authoring Tool for Adaptive E-Learning

ERIC Educational Resources Information Center

Deng, Lawrence Y.; Keh, Huan-Chao; Liu, Yi-Jen

2010-01-01

More video streaming technologies supporting distance learning systems are becoming popular among distributed network environments. In this paper, the authors develop a multimedia authoring tool for adaptive e-learning by using characterization of extended media streaming technologies. The distributed approach is based on an ontology-based model.…

75 FR 5291 - Office of Special Education and Rehabilitative Services; Overview Information; Technology and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

... two phases: (1) Development and (2) research on effectiveness. Abstracts of projects funded under... approaches. Phase 2 projects must subject technology-based approaches to rigorous field-based research to... disabilities; (2) Present a justification, based on scientifically rigorous research or theory, that supports...

Problem-Based Teaching and Learning in Technology Education.

ERIC Educational Resources Information Center

Putnam, A. R.

Research on how the brain works has resulted in wider-scale adoption of the principles of problem-based learning (PBL) in many areas of education, including technology education. The PBL approach is attractive to curriculum developers because it is based on interdisciplinary learning, results in multiple outcomes, is integrated and…

Evolving Uses of Technology in Case-Based Teacher Education.

ERIC Educational Resources Information Center

Smith, Janet C.; Diaz, Ricardo

Case study-based teacher education has been advocated since the mid-1980s. The evolution of technology-facilitated, case study-based professional development for adult education professionals may be traced by examining three projects involving the National Center on Adult Literacy and the International Literacy Institute at University of…

Web-Based Intelligent E-Learning Systems: Technologies and Applications

ERIC Educational Resources Information Center

Ma, Zongmin

2006-01-01

Collecting and presenting the latest research and development results from the leading researchers in the field of e-learning systems, Web-Based Intelligent E-Learning Systems: Technologies and Applications provides a single record of current research and practical applications in Web-based intelligent e-learning systems. This book includes major…

Overall View of Chemical and Biochemical Weapons

PubMed Central

Pitschmann, Vladimír

2014-01-01

This article describes a brief history of chemical warfare, which culminated in the signing of the Chemical Weapons Convention. It describes the current level of chemical weapons and the risk of using them. Furthermore, some traditional technology for the development of chemical weapons, such as increasing toxicity, methods of overcoming chemical protection, research on natural toxins or the introduction of binary technology, has been described. In accordance with many parameters, chemical weapons based on traditional technologies have achieved the limit of their development. There is, however, a big potential of their further development based on the most recent knowledge of modern scientific and technical disciplines, particularly at the boundary of chemistry and biology. The risk is even higher due to the fact that already, today, there is a general acceptance of the development of non-lethal chemical weapons at a technologically higher level. In the future, the chemical arsenal will be based on the accumulation of important information from the fields of chemical, biological and toxin weapons. Data banks obtained in this way will be hardly accessible and the risk of their materialization will persist. PMID:24902078

Overall view of chemical and biochemical weapons.

PubMed

Pitschmann, Vladimír

2014-06-04

This article describes a brief history of chemical warfare, which culminated in the signing of the Chemical Weapons Convention. It describes the current level of chemical weapons and the risk of using them. Furthermore, some traditional technology for the development of chemical weapons, such as increasing toxicity, methods of overcoming chemical protection, research on natural toxins or the introduction of binary technology, has been described. In accordance with many parameters, chemical weapons based on traditional technologies have achieved the limit of their development. There is, however, a big potential of their further development based on the most recent knowledge of modern scientific and technical disciplines, particularly at the boundary of chemistry and biology. The risk is even higher due to the fact that already, today, there is a general acceptance of the development of non-lethal chemical weapons at a technologically higher level. In the future, the chemical arsenal will be based on the accumulation of important information from the fields of chemical, biological and toxin weapons. Data banks obtained in this way will be hardly accessible and the risk of their materialization will persist.

Highlights of Nanosatellite Development Program at NASA-Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Rhee, Michael S.; Zakrzwski, Chuck M.; Thomas, Mike A.; Bauer, Frank H. (Technical Monitor)

2000-01-01

Currently the GN&C's Propulsion Branch of the NASA's Goddard Space Flight Center (GSFC) is conducting a broad technology development program for propulsion devices that are ideally suited for nanosatellite missions. The goal of our program is to develop nanosatellite propulsion systems that can be flight qualified in a few years and flown in support of nanosatellite missions. The miniature cold gas thruster technology, the first product from the GSFC's propulsion component technology development program, will be flown on the upcoming ST-5 mission in 2003. The ST-5 mission is designed to validate various nanosatellite technologies in all major subsystem areas. It is a precursor mission to more ambitious nanosatellite missions such as the Magnetospheric Constellation mission. By teaming with the industry and government partners, the GSFC propulsion component technology development program is aimed at pursuing a multitude of nanosatellite propulsion options simultaneously, ranging from miniaturized thrusters based on traditional chemical engines to MEMS based thruster systems. After a conceptual study phase to determine the feasibility and the applicability to nanosatellite missions, flight like prototypes of selected technology are fabricated for testing. The development program will further narrow down the effort to those technologies that are considered "mission-enabling" for future nanosatellite missions. These technologies will be flight qualified to be flown on upcoming nanosatellite missions. This paper will report on the status of our development program and provide details on the following technologies: Low power miniature cold gas thruster Nanosatellite solid rocket motor. Solid propellant gas generator system for cold gas thruster. Low temperature hydrazine blends for miniature hydrazine thruster. MEMS mono propellant thruster using hydrogen peroxide.

Policy Considerations for Commercializing Natural Gas and Biomass CCUS

NASA Astrophysics Data System (ADS)

Abrahams, L.; Clavin, C.

2017-12-01

Captured CO2 from power generation has been discussed as an opportunity to improve the environmental sustainability of fossil fuel-based electricity generation and likely necessary technological solution necessary for meeting long-term climate change mitigation goals. In our presentation, we review the findings of a study of natural gas CCUS technology research and development and discuss their applications to biomass CCUS technology potential. Based on interviews conducted with key stakeholders in CCUS technology development and operations, this presentation will discuss these technical and economic challenges and potential policy opportunities to support commercial scale CCUS deployment. In current domestic and electricity and oil markets, CCUS faces economic challenges for commercial deployment. In particular, the economic viability of CCUS has been impacted by the sustained low oil prices that have limited the potential for enhanced oil recovery (EOR) to serve as a near-term utilization opportunity for the captured CO2. In addition, large scale commercial adoption of CCUS is constrained by regulatory inconsistencies and uncertainties across the United States, high initial capital costs, achieving familiarity with new technology applications to existing markets, developing a successful performance track record to acquire financing agreements, and competing against well-established incumbent technologies. CCUS also has additional technical hurdles for measurement, verification, and reporting within states that have existing policy and regulatory frameworks for climate change mitigation. In addition to fossil-fuel based CCUS, we will discuss emerging opportunities to utilize CCUS fueled by gasified biomass resulting in carbon negative power generation with expanded economic opportunities associated with the enhanced carbon sequestration. Successful technology development of CCUS technology requires a portfolio of research leading to technical advances, advances in financial instruments to leverage the benefits of multiple commodity markets (e.g. natural gas, oil, biomass), and policy instruments that address regulatory hurdles posed CCUS technology deployment.

Autonomous rendezvous and capture development infrastructure

NASA Technical Reports Server (NTRS)

Bryan, Thomas C.; Roe, Fred; Coker, Cindy; Nelson, Pam; Johnson, B.

1991-01-01

In the development of the technology for autonomous rendezvous and docking, key infrastructure capabilities must be used for effective and economical development. This involves facility capabilities, both equipment and personnel, to devise, develop, qualify, and integrate ARD elements and subsystems into flight programs. One effective way of reducing technical risks in developing ARD technology is the use of the ultimate test facility, using a Shuttle-based reusable free-flying testbed to perform a Technology Demonstration Test Flight which can be structured to include a variety of additional sensors, control schemes, and operational approaches. This conceptual testbed and flight demonstration will be used to illustrate how technologies and facilities at MSFC can be used to develop and prove an ARD system.

A holistic framework to improve the uptake and impact of eHealth technologies.

PubMed

van Gemert-Pijnen, Julia E W C; Nijland, Nicol; van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-12-05

Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. To identify the potential and limitations of current eHealth frameworks (1999-2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap.

A Holistic Framework to Improve the Uptake and Impact of eHealth Technologies

PubMed Central

van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-01-01

Background Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. Objective The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. Methods To identify the potential and limitations of current eHealth frameworks (1999–2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. Results A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. Conclusions To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap. PMID:22155738

Configurable technology development for reusable control and monitor ground systems

NASA Technical Reports Server (NTRS)

Uhrlaub, David R.

1994-01-01

The control monitor unit (CMU) uses configurable software technology for real-time mission command and control, telemetry processing, simulation, data acquisition, data archiving, and ground operations automation. The base technology is currently planned for the following control and monitor systems: portable Space Station checkout systems; ecological life support systems; Space Station logistics carrier system; and the ground system of the Delta Clipper (SX-2) in the Single-Stage Rocket Technology program. The CMU makes extensive use of commercial technology to increase capability and reduce development and life-cycle costs. The concepts and technology are being developed by McDonnell Douglas Space and Defense Systems for the Real-Time Systems Laboratory at NASA's Kennedy Space Center under the Payload Ground Operations Contract. A second function of the Real-Time Systems Laboratory is development and utilization of advanced software development practices.

The Health Information Technology Competencies Tool: Does It Translate for Nursing Informatics in the United States?

PubMed

Sipes, Carolyn; Hunter, Kathleen; McGonigle, Dee; West, Karen; Hill, Taryn; Hebda, Toni

2017-12-01

Information technology use in healthcare delivery mandates a prepared workforce. The initial Health Information Technology Competencies tool resulted from a 2-year transatlantic effort by experts from the US and European Union to identify approaches to develop skills and knowledge needed by healthcare workers. It was determined that competencies must be identified before strategies are established, resulting in a searchable database of more than 1000 competencies representing five domains, five skill levels, and more than 250 roles. Health Information Technology Competencies is available at no cost and supports role- or competency-based queries. Health Information Technology Competencies developers suggest its use for curriculum planning, job descriptions, and professional development.The Chamberlain College of Nursing informatics research team examined Health Information Technology Competencies for its possible application to our research and our curricular development, comparing it originally with the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools, which examine informatics competencies at four levels of nursing practice. Additional analysis involved the 2015 Nursing Informatics: Scope and Standards of Practice. Informatics is a Health Information Technology Competencies domain, so clear delineation of nursing-informatics competencies was expected. Researchers found TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 differed from Health Information Technology Competencies 2016 in focus, definitions, ascribed competencies, and defined levels of expertise. When Health Information Technology Competencies 2017 was compared against the nursing informatics scope and standards, researchers found an increase in the number of informatics competencies but not to a significant degree. This is not surprising, given that Health Information Technology Competencies includes all healthcare workers, while the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools and the American Nurses Association Nursing Informatics: Scope and Standards of Practice are nurse specific. No clear cross mapping across these tools and the standards of nursing informatics practice exists. Further examination and review are needed to translate Health Information Technology Competencies as a viable tool for nursing informatics use in the US.

Development of SNS Stream Analysis Based on Forest Disaster Warning Information Service System

NASA Astrophysics Data System (ADS)

Oh, J.; KIM, D.; Kang, M.; Woo, C.; Kim, D.; Seo, J.; Lee, C.; Yoon, H.; Heon, S.

2017-12-01

Forest disasters, such as landslides and wildfires, cause huge economic losses and casualties, and the cost of recovery is increasing every year. While forest disaster mitigation technologies have been focused on the development of prevention and response technologies, they are now required to evolve into evacuation and border evacuation, and to develop technologies fused with ICT. In this study, we analyze the SNS (Social Network Service) stream and implement a system to detect the message that the forest disaster occurred or the forest disaster, and search the keyword related to the forest disaster in advance in real time. It is possible to detect more accurate forest disaster messages by repeatedly learning the retrieved results using machine learning techniques. To do this, we designed and implemented a system based on Hadoop and Spark, a distributed parallel processing platform, to handle Twitter stream messages that open SNS. In order to develop the technology to notify the information of forest disaster risk, a linkage of technology such as CBS (Cell Broadcasting System) based on mobile communication, internet-based civil defense siren, SNS and the legal and institutional issues for applying these technologies are examined. And the protocol of the forest disaster warning information service system that can deliver the SNS analysis result was developed. As a result, it was possible to grasp real-time forest disaster situation by real-time big data analysis of SNS that occurred during forest disasters. In addition, we confirmed that it is possible to rapidly propagate alarm or warning according to the disaster situation by using the function of the forest disaster warning information notification service. However, the limitation of system application due to the restriction of opening and sharing of SNS data currently in service and the disclosure of personal information remains a problem to be solved in the future. Keyword : SNS stream, Big data, Machine learning techniques, CBS, Forest disaster warning information service system Acknowledgement : This research was supported by the Forestry Technology 2015 Forestry Technology Research and Development Project (Planning project).

Energy Savings Potential and RD&D Opportunities for Non-Vapor-Compression HVAC Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

While vapor-compression technologies have served heating, ventilation, and air-conditioning (HVAC) needs very effectively, and have been the dominant HVAC technology for close to 100 years, the conventional refrigerants used in vapor-compression equipment contribute to global climate change when released to the atmosphere. This Building Technologies Office report: --Identifies alternatives to vapor-compression technology in residential and commercial HVAC applications --Characterizes these technologies based on their technical energy savings potential, development status, non-energy benefits, and other factors affecting end-user acceptance and their ability to compete with conventional vapor-compression systems --Makes specific research, development, and deployment (RD&D) recommendations to support further development ofmore » these technologies, should DOE choose to support non-vapor-compression technology further.« less

A review of technology-based interventions to maintain weight loss.

PubMed

Lee, Sohye; Lindquist, Ruth

2015-03-01

For many decades, healthcare providers and researchers have developed weight-loss interventions to help people achieve weight loss. Unfortunately, it is typical for people to lose weight quickly during the intervention period but then slowly regain weight until they return to their approximate baseline. Technology-based maintenance interventions are among the newest approaches to long-term weight loss. Several advantages make technology helpful for maintaining weight loss. The purpose of this article was to review and critique the randomized controlled trials of technology-based weight-loss maintenance interventions (WLMIs) for adults. A systematic search through electronic databases and a manual citation search were conducted. Limited numbers of controlled trials published since 2000 that included randomization, and technology-based WLMIs were identified. The characteristics of the eight studies were diverse. The average score of study design quality was moderate. The results of the effectiveness of technology-based WLMIs were mixed. Technology-based WLMIs are more likely to be effective than usual care but not more effective than personal contact. Based on the review, guidelines were established for the selection and potential success of technology-based WLMIs. The effectiveness of technology-based maintenance interventions for weight loss varied, and potential strategies and approaches are discussed to improve their effectiveness. Further studies are needed to better evaluate and refine the efficacy of technology-based WLMIs.

A decision model for selecting sustainable drinking water supply and greywater reuse systems for developing communities with a case study in Cimahi, Indonesia.

PubMed

Henriques, Justin J; Louis, Garrick E

2011-01-01

Capacity Factor Analysis is a decision support system for selection of appropriate technologies for municipal sanitation services in developing communities. Developing communities are those that lack the capability to provide adequate access to one or more essential services, such as water and sanitation, to their residents. This research developed two elements of Capacity Factor Analysis: a capacity factor based classification for technologies using requirements analysis, and a matching policy for choosing technology options. First, requirements analysis is used to develop a ranking for drinking water supply and greywater reuse technologies. Second, using the Capacity Factor Analysis approach, a matching policy is developed to guide decision makers in selecting the appropriate drinking water supply or greywater reuse technology option for their community. Finally, a scenario-based informal hypothesis test is developed to assist in qualitative model validation through case study. Capacity Factor Analysis is then applied in Cimahi Indonesia as a form of validation. The completed Capacity Factor Analysis model will allow developing communities to select drinking water supply and greywater reuse systems that are safe, affordable, able to be built and managed by the community using local resources, and are amenable to expansion as the community's management capacity increases. Copyright © 2010 Elsevier Ltd. All rights reserved.

Exploring the Influence of Web-Based Portfolio Development on Learning To Teach Elementary Science.

ERIC Educational Resources Information Center

Avraamidou, Lucy; Zembal-Saul, Carla

This study examined how Web-based portfolio development supported reflective thinking and learning within a Professional Development School (PDS). It investigated the evidence-based philosophies developed by prospective teachers as a central part of the Web-based portfolio task, noting how technology contributed to the portfolio task. Participants…

Developing Games and Simulations for Today and Tomorrow's Tech Savvy Youth

ERIC Educational Resources Information Center

Klopfer, Eric; Yoon, Susan

2005-01-01

Constructively promoting the educational development of today's young tech savvy students and fostering the productive technological facility of tomorrow's youth requires harnessing new technological tools creatively. The MIT Teacher Education Program (TEP) focuses on the research and development of educational computer-based simulations and games…

Human Capital and Technology Development in Malaysia

ERIC Educational Resources Information Center

Awang, Halimah

2004-01-01

This paper examines the development of Information and Communication Technology (ICT) and its relation to the development of human capital in Malaysia as a country undergoing transformation into an ICT-driven and knowledge-based society. Education and training, being the key variable of human capital, is examined in terms of the government…

Development of a Convergent Spray Technologies(tm) Spray Process for a Solventless Sprayable Coating, MCC-1

NASA Technical Reports Server (NTRS)

Patel, Anil K.; Meeks, C.

1998-01-01

This paper discusses the application of Convergent Spray Technologies (TM) Spray Process to the development and successful implementation of Marshall Convergent Coating (MCC-1) as a primary Thermal Protection System (TPS) for the Space Shuttle Solid Rocket Boosters (SRBs). This paper discusses the environmental and process benefits of the MCC-1 technology, shows the systematic steps taken in developing the technology, including statistical sensitivity studies of about 35 variables. Based on the process and post-flight successes on the SRB, it will be seen that the technology is "field-proven". Application of this technology to other aerospace and commercial programs is summarized to illustrate the wide range of possibilities.

The ATHENA optics development

NASA Astrophysics Data System (ADS)

Bavdaz, Marcos; Wille, Eric; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Barriere, Nicolas; Yanson, Alexei; Vacanti, Giuseppe; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heinz; Christensen, Finn; Della Monica Ferreira, Desiree; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis

2016-07-01

ATHENA (Advanced Telescope for High ENergy Astrophysics) is being studied by the European Space Agency (ESA) as the second large science mission, with a launch slot in 2028. System studies and technology preparation activities are on-going. The optics of the telescope is based on the modular Silicon Pore Optics (SPO), a novel X-ray optics technology significantly benefiting from spin-in from the semiconductor industry. Several technology development activities are being implemented by ESA in collaboration with European industry and institutions. The related programmatic background, technology development approach and the associated implementation planning are presented.

Recent development on computer aided tissue engineering--a review.

PubMed

Sun, Wei; Lal, Pallavi

2002-02-01

The utilization of computer-aided technologies in tissue engineering has evolved in the development of a new field of computer-aided tissue engineering (CATE). This article reviews recent development and application of enabling computer technology, imaging technology, computer-aided design and computer-aided manufacturing (CAD and CAM), and rapid prototyping (RP) technology in tissue engineering, particularly, in computer-aided tissue anatomical modeling, three-dimensional (3-D) anatomy visualization and 3-D reconstruction, CAD-based anatomical modeling, computer-aided tissue classification, computer-aided tissue implantation and prototype modeling assisted surgical planning and reconstruction.

State-of-the-Art Model Driven Game Development: A Survey of Technological Solutions for Game-Based Learning

ERIC Educational Resources Information Center

Tang, Stephen; Hanneghan, Martin

2011-01-01

Game-based learning harnesses the advantages of computer games technology to create a fun, motivating and interactive virtual learning environment that promotes problem-based experiential learning. Such an approach is advocated by many commentators to provide an enhanced learning experience than those based on traditional didactic methods.…

A research on the positioning technology of vehicle navigation system from single source to "ASPN"

NASA Astrophysics Data System (ADS)

Zhang, Jing; Li, Haizhou; Chen, Yu; Chen, Hongyue; Sun, Qian

2017-10-01

Due to the suddenness and complexity of modern warfare, land-based weapon systems need to have precision strike capability on roads and railways. The vehicle navigation system is one of the most important equipments for the land-based weapon systems that have precision strick capability. There are inherent shortcomings for single source navigation systems to provide continuous and stable navigation information. To overcome the shortcomings, the multi-source positioning technology is developed. The All Source Positioning and Navigaiton (ASPN) program was proposed in 2010, which seeks to enable low cost, robust, and seamless navigation solutions for military to use on any operational platform and in any environment with or without GPS. The development trend of vehicle positioning technology was reviewed in this paper. The trend indicates that the positioning technology is developed from single source and multi-source to ASPN. The data fusion techniques based on multi-source and ASPN was analyzed in detail.

A Study on the Data Compression Technology-Based Intelligent Data Acquisition (IDAQ) System for Structural Health Monitoring of Civil Structures

PubMed Central

Jeon, Joonryong

2017-01-01

In this paper, a data compression technology-based intelligent data acquisition (IDAQ) system was developed for structural health monitoring of civil structures, and its validity was tested using random signals (El-Centro seismic waveform). The IDAQ system was structured to include a high-performance CPU with large dynamic memory for multi-input and output in a radio frequency (RF) manner. In addition, the embedded software technology (EST) has been applied to it to implement diverse logics needed in the process of acquiring, processing and transmitting data. In order to utilize IDAQ system for the structural health monitoring of civil structures, this study developed an artificial filter bank by which structural dynamic responses (acceleration) were efficiently acquired, and also optimized it on the random El-Centro seismic waveform. All techniques developed in this study have been embedded to our system. The data compression technology-based IDAQ system was proven valid in acquiring valid signals in a compressed size. PMID:28704945

A Study on the Data Compression Technology-Based Intelligent Data Acquisition (IDAQ) System for Structural Health Monitoring of Civil Structures.

PubMed

Heo, Gwanghee; Jeon, Joonryong

2017-07-12

In this paper, a data compression technology-based intelligent data acquisition (IDAQ) system was developed for structural health monitoring of civil structures, and its validity was tested using random signals (El-Centro seismic waveform). The IDAQ system was structured to include a high-performance CPU with large dynamic memory for multi-input and output in a radio frequency (RF) manner. In addition, the embedded software technology (EST) has been applied to it to implement diverse logics needed in the process of acquiring, processing and transmitting data. In order to utilize IDAQ system for the structural health monitoring of civil structures, this study developed an artificial filter bank by which structural dynamic responses (acceleration) were efficiently acquired, and also optimized it on the random El-Centro seismic waveform. All techniques developed in this study have been embedded to our system. The data compression technology-based IDAQ system was proven valid in acquiring valid signals in a compressed size.

Determination of Misconceptions Belonging to the "Solar System and Beyond: Space Puzzle" Unit in 7th Grade Science and Technology Curriculum with Two-Tier Diagnostic Tests

ERIC Educational Resources Information Center

Töman, Ögr. Gör. Ufuk; Ergen, Yusuf

2014-01-01

Today's World is in period of rapid development of science and technology. There is science and technology education that not based on rote, practical on the basis of development in science and technology. Misconceptions are a major obstacle in order to take the desired efficiency. Because concepts that learned wrong obstacle attainment of right…

Development of Laser-Polarized Noble Gas Magnetic Resonance Imaging (MRI) Technology

NASA Technical Reports Server (NTRS)

Walsworth, Ronald L.

2004-01-01

We are developing technology for laser-polarized noble gas nuclear magnetic resonance (NMR), with the aim of enabling it as a novel biomedical imaging tool for ground-based and eventually space-based application. This emerging multidisciplinary technology enables high-resolution gas-space magnetic resonance imaging (MRI)-e.g., of lung ventilation, perfusion, and gas-exchange. In addition, laser-polarized noble gases (3He and 1BXe) do not require a large magnetic field for sensitive NMR detection, opening the door to practical MRI with novel, open-access magnet designs at very low magnetic fields (and hence in confined spaces). We are pursuing two specific aims in this technology development program. The first aim is to develop an open-access, low-field (less than 0.01 T) instrument for MRI studies of human gas inhalation as a function of subject orientation, and the second aim is to develop functional imaging of the lung using laser-polarized He-3 and Xe-129.

Exploring Middle School Teachers' Perceptions and Applications of a Site-Based, Technology-Related Professional Development Program Focused on Interactive Whiteboards and Classroom Response Systems

ERIC Educational Resources Information Center

Desai, Shreya J.

2012-01-01

This qualitative study examined five middle school teachers' perceptions of a site-based, technology-related professional development (TRPD) program focused on the interactive whiteboard (IWB) and the classroom response system (CRS) and the practices implemented in the teachers' classrooms as a result of participation in the TRPD…

Developing eLearning Technologies to Implement Competency Based Medical Education: Experiences from Muhimbili University of Health and Allied Sciences

ERIC Educational Resources Information Center

Nagunwa, Thomas; Lwoga, Edda

2012-01-01

This paper provides the practical experience of developing an eLearning technology as a tool to implement Competency-based Medical Education (CBME) in Tanzania medical universities, with a specific focus on Muhimbili University of Health and Allied Sciences. The paper provides a background to eLearning and the early attempt to adopt it in 2006 at…

Solar and Energy Conserving Food Technologies: A Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-17.

ERIC Educational Resources Information Center

Farallones Inst., Occidental, CA.

Based on experience in the field, this training manual was developed to help Peace Corps trainers plan and implement inservice training programs in solar and other energy conserving food technologies for Peace Corps volunteers and community workers. Using a competency-based format, the manual contains 20 sessions (learning modules) that focus on…

Literacity: A multimedia adult literacy package combining NASA technology, recursive ID theory, and authentic instruction theory

NASA Technical Reports Server (NTRS)

Willis, Jerry; Willis, Dee Anna; Walsh, Clare; Stephens, Elizabeth; Murphy, Timothy; Price, Jerry; Stevens, William; Jackson, Kevin; Villareal, James A.; Way, Bob

1994-01-01

An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application under development is LiteraCity, a simulation-based instructional package for adults who do not have functional reading skills. Using fuzzy logic routines and other technologies developed by NASA's Information Systems Directorate and hypermedia sound, graphics, and animation technologies the project attempts to overcome the limited impact of adult literacy assessment and instruction by involving the adult in an interactive simulation of real-life literacy activities. The project uses a recursive instructional development model and authentic instruction theory. This paper describes one component of a project to design, develop, and produce a series of computer-based, multimedia instructional packages. The packages are being developed for use in adult literacy programs, particularly in correctional education centers. They use the concepts of authentic instruction and authentic assessment to guide development. All the packages to be developed are instructional simulations. The first is a simulation of 'finding a friend a job.'

Rapid Prototyping in Technology Education.

ERIC Educational Resources Information Center

Flowers, Jim; Moniz, Matt

2002-01-01

Describes how technology education majors are using a high-tech model builder, called a fused deposition modeling machine, to develop their models directly from computer-based designs without any machining. Gives examples of applications in technology education. (JOW)

Technology Diffusion. [SITE 2002 Section].

ERIC Educational Resources Information Center

Niederhauser, Dale S., Ed.; Strudler, Neal, Ed.

This document contains the following papers on technology diffusion from the SITE (Society for Information Technology & Teacher Education) 2002 conference: (1) "Faculty Technology Integration Project" (Comfort Akwaji); (2) "If It Is Broke, Then What?" (D. Lynnwood Belvin and Jennifer Leaderer); (3) "Developing Video-Based E-Learning Applications"…

Cost benefit analysis of space communications technology: Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Holland, L. D.; Sassone, P. G.; Gallagher, J. J.; Robinette, S. L.; Vogler, F. H.; Zimmer, R. P.

1976-01-01

The questions of (1) whether or not NASA should support the further development of space communications technology, and, if so, (2) which technology's support should be given the highest priority are addressed. Insofar as the issues deal principally with resource allocation, an economics perspective is adopted. The resultant cost benefit methodology utilizes the net present value concept in three distinct analysis stages to evaluate and rank those technologies which pass a qualification test based upon probable (private sector) market failure. User-preference and technology state-of-the-art surveys were conducted (in 1975) to form a data base for the technology evaluation. The program encompassed near-future technologies in space communications earth stations and satellites, including the noncommunication subsystems of the satellite (station keeping, electrical power system, etc.). Results of the research program include confirmation of the applicability of the methodology as well as a list of space communications technologies ranked according to the estimated net present value of their support (development) by NASA.

Internet of Things technology-based management methods for environmental specimen banks.

PubMed

Peng, Lihong; Wang, Qian; Yu, Ang

2015-02-01

The establishment and management of environmental specimen banks (ESBs) has long been a problem worldwide. The complexity of specimen environment has made the management of ESB likewise complex. Through an analysis of the development and management of ESBs worldwide and in light of the sophisticated Internet of Things (IOT) technology, this paper presents IOT technology-based ESB management methods. An IOT technology-based ESB management system can significantly facilitate ESB ingress and egress management as well as long-term storage management under quality control. This paper elaborates on the design of IOT technology-based modules, which can be used in ESB management to achieve standardized, smart, information-based ESB management. ESB management has far-reaching implications for environmental management and for research in environmental science.

Network-based collaborative research environment LDRD final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davies, B.R.; McDonald, M.J.

1997-09-01

The Virtual Collaborative Environment (VCE) and Distributed Collaborative Workbench (DCW) are new technologies that make it possible for diverse users to synthesize and share mechatronic, sensor, and information resources. Using these technologies, university researchers, manufacturers, design firms, and others can directly access and reconfigure systems located throughout the world. The architecture for implementing VCE and DCW has been developed based on the proposed National Information Infrastructure or Information Highway and a tool kit of Sandia-developed software. Further enhancements to the VCE and DCW technologies will facilitate access to other mechatronic resources. This report describes characteristics of VCE and DCW andmore » also includes background information about the evolution of these technologies.« less

Educational Implications of Technological Change. Technology and the American Economy, Appendix, Volume IV.

ERIC Educational Resources Information Center

National Commission on Technology, Automation and Economic Progress, Washington, DC.

Three studies dealing with the educational implications of technological change are presented. "The Application of Computer Technology to the Improvement of Instruction and Learning" by Don D. Bushnell, Richard deMille, and Judith Purl is based on 35 research and development programs involving computer technology. Their general thesis is that…

IFLA General Conference, 1986. Management and Technology Division. Section: Information Technology. Papers.

ERIC Educational Resources Information Center

International Federation of Library Associations and Institutions, The Hague (Netherlands).

Four papers on information technology were presented at the 1986 International Federation of Library Associations (IFLA) conference. In the paper "Optical Disc Technology Used for Large-Scale Data Base," Naoto Nakayama (Japan) considers the rapid development of optical technology and the role of applications such as optical discs,…

A Knowledge-Based System Developer for aerospace applications

NASA Technical Reports Server (NTRS)

Shi, George Z.; Wu, Kewei; Fensky, Connie S.; Lo, Ching F.

1993-01-01

A prototype Knowledge-Based System Developer (KBSD) has been developed for aerospace applications by utilizing artificial intelligence technology. The KBSD directly acquires knowledge from domain experts through a graphical interface then builds expert systems from that knowledge. This raises the state of the art of knowledge acquisition/expert system technology to a new level by lessening the need for skilled knowledge engineers. The feasibility, applicability , and efficiency of the proposed concept was established, making a continuation which would develop the prototype to a full-scale general-purpose knowledge-based system developer justifiable. The KBSD has great commercial potential. It will provide a marketable software shell which alleviates the need for knowledge engineers and increase productivity in the workplace. The KBSD will therefore make knowledge-based systems available to a large portion of industry.

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI

PubMed Central

Astell, Arlene J.; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized. PMID:29867610

System Development Guidelines From a Review of Motion-Based Technology for People With Dementia or MCI.

PubMed

Astell, Arlene J; Czarnuch, Stephen; Dove, Erica

2018-01-01

As the population ages and the number of people living with dementia or mild cognitive impairment (MCI) continues to increase, it is critical to identify creative and innovative ways to support and improve their quality of life. Motion-based technology has shown significant potential for people living with dementia or MCI by providing opportunities for cognitive stimulation, physical activity and participation in meaningful leisure activities, while simultaneously functioning as a useful tool for research and development of interventions. However, many of the current systems created using motion-based technology have not been designed specifically for people with dementia or MCI. Additionally, the usability and accessibility of these systems for these populations has not been thoroughly considered. This paper presents a set of system development guidelines derived from a review of the state of the art of motion-based technologies for people with dementia or MCI. These guidelines highlight three overarching domains of consideration for systems targeting people with dementia or MCI: (i) cognitive, (ii) physical, and (iii) social. We present the guidelines in terms of relevant design and use considerations within these domains and the emergent design themes within each domain. Our hope is that these guidelines will aid in designing motion-based software to meet the needs of people with dementia or MCI such that the potential of these technologies can be realized.

The Role of Mechanized Services in the Provision of Information with Special Reference to the University Environment.

ERIC Educational Resources Information Center

Heim, Kathleen M.

The use, history, and role of machine-readable data base technology is discussed. First the development of data base technology is traced from its beginnings as a special resource for science and technology to its broader use in universities, with descriptions of some specific services. Next the current status of mechanized information services in…

Teachers' Experiences of Technology-Based Teaching and Learning in the Foundation Phase

ERIC Educational Resources Information Center

Hannaway, D. M.; Steyn, M. G.

2017-01-01

This paper presents one aspect of a larger scale doctoral study, namely the teachers' experiences of technology-based teaching and learning in the Foundation Phase. Technology is a huge driver of change and South African education has to change regularly to meet the requirements set out by the Department of Education, including the development of…

The roles and functions of a lunar base Nuclear Technology Center

NASA Astrophysics Data System (ADS)

Buden, D.; Angelo, J. A., Jr.

This paper describes the roles and functions of a special Nuclear Technology Center which is developed as an integral part of a permanent lunar base. Numerous contemporary studies clearly point out that nuclear energy technology will play a major role in any successful lunar/Mars initiative program and in the overall establishment of humanity's solar system civilization. The key role of nuclear energy in the providing power has been recognized. A Nuclear Technology Center developed as part of a permanent lunar base can also help bring about many other nuclear technology applications, such as producing radioisotopes for self-illumination, food preservation, waste sterilization, and medical treatment; providing thermal energy for mining, materials processing and agricultural; and as a source of emergency habitat power. Designing such a center will involve the deployment, operation, servicing and waste product management and disposal of megawatt class reactor power plants. This challenge must be met with a minimum of direct human support at the facility. Furthermore, to support the timely, efficient integration of this Nuclear Technology Center in the evolving lunar base infrastructure, an analog of such a facility will be needed here on Earth.

Semiochemical-based technologies for fly management

USDA-ARS?s Scientific Manuscript database

Filth flies are important insect pests that have caused over billions of dollars damage in animal production, food contamination and disease transmitting. The present presentation reports our recent findings on the development of filth fly control using semiochemical-based technologies to reduce the...

Advanced Fiber Optic-Based Sensing Technology for Unmanned Aircraft Systems

NASA Technical Reports Server (NTRS)

Richards, Lance; Parker, Allen R.; Piazza, Anthony; Ko, William L.; Chan, Patrick; Bakalyar, John

2011-01-01

This presentation provides an overview of fiber optic sensing technology development activities performed at NASA Dryden in support of Unmanned Aircraft Systems. Examples of current and previous work are presented in the following categories: algorithm development, system development, instrumentation installation, ground R&D, and flight testing. Examples of current research and development activities are provided.

Teacher education in the generative virtual classroom: developing learning theories through a web-delivered, technology-and-science education context

NASA Astrophysics Data System (ADS)

Schaverien, Lynette

2003-12-01

This paper reports the use of a research-based, web-delivered, technology-and-science education context (the Generative Virtual Classroom) in which student-teachers can develop their ability to recognize, describe, analyse and theorize learning. Addressing well-recognized concerns about narrowly conceived, anachronistic and ineffective technology-and-science education, this e-learning environment aims to use advanced technologies for learning, to bring about larger scale improvement in classroom practice than has so far been effected by direct intervention through teacher education. Student-teachers' short, intensive engagement with the Generative Virtual Classroom during their practice teaching is examined. Findings affirm the worth of this research-based e-learning system for teacher education and the power of a biologically based, generative theory to make sense of the learning that occurred.

Light-based science and technologies and human civilization: an optical course for general education

NASA Astrophysics Data System (ADS)

Li, Xiaotong; Wang, Kaiwei; Yang, Qing; Si, Ke

2017-08-01

Starting from 2015, a general education course named "Light-based science and technologies and human civilization" has been offered in Zhejiang University. We try to give a humanism view angle to observe optics and optical engineering, and combine them with the relationship of human and the nature, the development of human society and human health. In this course we introduce different historical periods of light-based science and technologies, the great optical researchers, the typical research methods, advantages, academic discussions and the relationship with human civilization. The relevant cross-fields of learning and Nobel Prize winners are also included. This course provides the students with the typical examples about how academic revolution influences the world development, and also with humanism sight which exceeds the range of science and technologies themselves.

DJINNI: A Novel Technology Supported Exposure Therapy Paradigm for SAD Combining Virtual Reality and Augmented Reality.

PubMed

Ben-Moussa, Maher; Rubo, Marius; Debracque, Coralie; Lange, Wolf-Gero

2017-01-01

The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for social anxiety disorder. "DJINNI" is a conceptual design of an in vivo augmented reality (AR) exposure therapy mobile support system that exploits several capturing technologies and integrates the patient's state and situation by vision-based, audio-based, and physiology-based analysis as well as by indoor/outdoor localization techniques. DJINNI also comprises an innovative virtual reality exposure therapy system that is adaptive and customizable to the demands of the in vivo experience and therapeutic progress. DJINNI follows a gamification approach where rewards and achievements are utilized to motivate the patient to progress in her/his treatment. The current paper reviews the state of the art of technologies needed for such a solution and recommends how these technologies could be integrated in the development of an individually tailored and yet feasible and effective AR/virtual reality-based exposure therapy. Finally, the paper outlines how DJINNI could be part of classical cognitive behavioral treatment and how to validate such a setup.

DJINNI: A Novel Technology Supported Exposure Therapy Paradigm for SAD Combining Virtual Reality and Augmented Reality

PubMed Central

Ben-Moussa, Maher; Rubo, Marius; Debracque, Coralie; Lange, Wolf-Gero

2017-01-01

The present paper explores the benefits and the capabilities of various emerging state-of-the-art interactive 3D and Internet of Things technologies and investigates how these technologies can be exploited to develop a more effective technology supported exposure therapy solution for social anxiety disorder. “DJINNI” is a conceptual design of an in vivo augmented reality (AR) exposure therapy mobile support system that exploits several capturing technologies and integrates the patient’s state and situation by vision-based, audio-based, and physiology-based analysis as well as by indoor/outdoor localization techniques. DJINNI also comprises an innovative virtual reality exposure therapy system that is adaptive and customizable to the demands of the in vivo experience and therapeutic progress. DJINNI follows a gamification approach where rewards and achievements are utilized to motivate the patient to progress in her/his treatment. The current paper reviews the state of the art of technologies needed for such a solution and recommends how these technologies could be integrated in the development of an individually tailored and yet feasible and effective AR/virtual reality-based exposure therapy. Finally, the paper outlines how DJINNI could be part of classical cognitive behavioral treatment and how to validate such a setup. PMID:28503155

Towards personalised management of atherosclerosis via computational models in vascular clinics: technology based on patient-specific simulation approach

PubMed Central

Di Tomaso, Giulia; Agu, Obiekezie; Pichardo-Almarza, Cesar

2014-01-01

The development of a new technology based on patient-specific modelling for personalised healthcare in the case of atherosclerosis is presented. Atherosclerosis is the main cause of death in the world and it has become a burden on clinical services as it manifests itself in many diverse forms, such as coronary artery disease, cerebrovascular disease/stroke and peripheral arterial disease. It is also a multifactorial, chronic and systemic process that lasts for a lifetime, putting enormous financial and clinical pressure on national health systems. In this Letter, the postulate is that the development of new technologies for healthcare using computer simulations can, in the future, be developed as in-silico management and support systems. These new technologies will be based on predictive models (including the integration of observations, theories and predictions across a range of temporal and spatial scales, scientific disciplines, key risk factors and anatomical sub-systems) combined with digital patient data and visualisation tools. Although the problem is extremely complex, a simulation workflow and an exemplar application of this type of technology for clinical use is presented, which is currently being developed by a multidisciplinary team following the requirements and constraints of the Vascular Service Unit at the University College Hospital, London. PMID:26609369

NASA IVHM Technology Experiment for X-vehicles (NITEX)

NASA Technical Reports Server (NTRS)

Sandra, Hayden; Bajwa, Anupa

2001-01-01

The purpose of the NASA IVHM Technology Experiment for X-vehicles (NITEX) is to advance the development of selected IVHM technologies in a flight environment and to demonstrate the potential for reusable launch vehicle ground processing savings. The technologies to be developed and demonstrated include system-level and detailed diagnostics for real-time fault detection and isolation, prognostics for fault prediction, automated maintenance planning based on diagnostic and prognostic results, and a microelectronics hardware platform. Complete flight The Evolution of Flexible Insulation as IVHM consists of advanced sensors, distributed data acquisition, data processing that includes model-based diagnostics, prognostics and vehicle autonomy for control or suggested action, and advanced data storage. Complete ground IVHM consists of evolved control room architectures, advanced applications including automated maintenance planning and automated ground support equipment. This experiment will advance the development of a subset of complete IVHM.

Autonomous power management and distribution

NASA Technical Reports Server (NTRS)

Dolce, Jim; Kish, Jim

1990-01-01

The goal of the Autonomous Power System program is to develop and apply intelligent problem solving and control to the Space Station Freedom's electric power testbed being developed at NASA's Lewis Research Center. Objectives are to establish artificial intelligence technology paths, craft knowledge-based tools and products for power systems, and integrate knowledge-based and conventional controllers. This program represents a joint effort between the Space Station and Office of Aeronautics and Space Technology to develop and demonstrate space electric power automation technology capable of: (1) detection and classification of system operating status, (2) diagnosis of failure causes, and (3) cooperative problem solving for power scheduling and failure recovery. Program details, status, and plans will be presented.

WHO influenza vaccine technology transfer initiative: role and activities of the Technical Advisory Group.

PubMed

Francis, Donald P; Grohmann, Gary

2011-07-01

In May 2006, the WHO published a Global Pandemic Influenza Action Plan. A significant part of that plan involves the transfer of technology necessary to build production capacity in developing countries. The WHO influenza technology transfer initiative has been successful. Clearly the relatively small WHO investments made in these companies to develop their own influenza vaccine production facilities have had quite dramatic results. A few companies are already producing large amounts of influenza vaccine. Others will soon follow. Whether they are developing egg-based or planning non-egg based influenza vaccine production, all companies are optimistic that their efforts will come to fruition. Copyright © 2011 Elsevier Ltd. All rights reserved.

Assessing Performance and Consequence Competence in a Technology-Based Professional Development for Agricultural Science Teachers: An Evaluation of the Lincoln Electric Welding Technology Workshop

ERIC Educational Resources Information Center

Saucier, P. Ryan; McKim, Billy R.; Muller, Joe E.; Kingman, Douglas M.

2014-01-01

Professional development education for teachers is essential to improving teacher retention, program relevance and effectiveness, and the preparation of fully qualified and highly motivated career and technology educators at all career stages (Doerfert, 2011; Lambeth, Elliot, & Joerger, 2008). Furthermore, it is necessary to link industry…

Problem Solving in Technology-Rich Environments. A Report from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2007-466

ERIC Educational Resources Information Center

Bennett, Randy Elliot; Persky, Hilary; Weiss, Andrew R.; Jenkins, Frank

2007-01-01

The Problem Solving in Technology-Rich Environments (TRE) study was designed to demonstrate and explore innovative use of computers for developing, administering, scoring, and analyzing the results of National Assessment of Educational Progress (NAEP) assessments. Two scenarios (Search and Simulation) were created for measuring problem solving…

Teaching and Technologies for Human Development.

ERIC Educational Resources Information Center

Chickering, Arthur W.; Payne, Carla; Poitras, Gail

2001-01-01

Discusses the potential of emerging communication and information technologies in terms of human development. Topics include distinctions between training and education, instrumental and developmental purposes, and differentiation and integration; developmental stages theory; a leadership seminar based on developmental stages; and uses of…

Technology Transfer Report

NASA Technical Reports Server (NTRS)

2000-01-01

Since its inception, Goddard has pursued a commitment to technology transfer and commercialization. For every space technology developed, Goddard strives to identify secondary applications. Goddard then provides the technologies, as well as NASA expertise and facilities, to U.S. companies, universities, and government agencies. These efforts are based in Goddard's Technology Commercialization Office. This report presents new technologies, commercialization success stories, and other Technology Commercialization Office activities in 1999.

The development of internet based ship design support system for small and medium sized shipyards

NASA Astrophysics Data System (ADS)

Shin, Sung-Chul; Lee, Soon-Sup; Kang, Dong-Hoon; Lee, Kyung-Ho

2012-03-01

In this paper, a prototype of ship basic planning system is implemented for the small and medium sized shipyards based on the internet technology and concurrent engineering concept. The system is designed from the user requirements. Consequently, standardized development environment and tools are selected. These tools are used for the system development to define and evaluate core application technologies. The system will contribute to increasing competitiveness of small and medium sized shipyards in the 21st century industrial en-vironment.

Nuclear propulsion technology development - A joint NASA/Department of Energy project

NASA Technical Reports Server (NTRS)

Clark, John S.

1992-01-01

NASA-Lewis has undertaken the conceptual development of spacecraft nuclear propulsion systems with DOE support, in order to establish the bases for Space Exploration Initiative lunar and Mars missions. This conceptual evolution project encompasses nuclear thermal propulsion (NTP) and nuclear electric propulsion (NEP) systems. A technology base exists for NTP in the NERVA program files; more fundamental development efforts are entailed in the case of NEP, but this option is noted to offer greater advantages in the long term.

Technological progress and challenges towards cGMP manufacturing of human pluripotent stem cells based therapeutic products for allogeneic and autologous cell therapies.

PubMed

Abbasalizadeh, Saeed; Baharvand, Hossein

2013-12-01

Recent technological advances in the generation, characterization, and bioprocessing of human pluripotent stem cells (hPSCs) have created new hope for their use as a source for production of cell-based therapeutic products. To date, a few clinical trials that have used therapeutic cells derived from hESCs have been approved by the Food and Drug Administration (FDA), but numerous new hPSC-based cell therapy products are under various stages of development in cell therapy-specialized companies and their future market is estimated to be very promising. However, the multitude of critical challenges regarding different aspects of hPSC-based therapeutic product manufacturing and their therapies have made progress for the introduction of new products and clinical applications very slow. These challenges include scientific, technological, clinical, policy, and financial aspects. The technological aspects of manufacturing hPSC-based therapeutic products for allogeneic and autologous cell therapies according to good manufacturing practice (cGMP) quality requirements is one of the most important challenging and emerging topics in the development of new hPSCs for clinical use. In this review, we describe main critical challenges and highlight a series of technological advances in all aspects of hPSC-based therapeutic product manufacturing including clinical grade cell line development, large-scale banking, upstream processing, downstream processing, and quality assessment of final cell therapeutic products that have brought hPSCs closer to clinical application and commercial cGMP manufacturing. © 2013.

Options for Technology Transfer.

ERIC Educational Resources Information Center

Anderson, Richard E.; Sugarman, Barry

1989-01-01

Structural means by which institutions of higher education can tap technology are explored with an examination of the licensing of technological discoveries as well as the creation of start-up companies based upon university-developed technology. Additionally, the corporate structures that are being formed so that institutions can more easily hold…

Technology and Reform-Based Science Education

ERIC Educational Resources Information Center

Dani, Danielle E.; Koenig, Kathleen M.

2008-01-01

Current reforms in science education call for the integration of digital technologies into science teaching, advocating that students learn science content and processes through technology. In this article, we provide practical examples, situated within the literature, of how digital technologies can be used to support the development and…

Natural language processing-based COTS software and related technologies survey.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stickland, Michael G.; Conrad, Gregory N.; Eaton, Shelley M.

Natural language processing-based knowledge management software, traditionally developed for security organizations, is now becoming commercially available. An informal survey was conducted to discover and examine current NLP and related technologies and potential applications for information retrieval, information extraction, summarization, categorization, terminology management, link analysis, and visualization for possible implementation at Sandia National Laboratories. This report documents our current understanding of the technologies, lists software vendors and their products, and identifies potential applications of these technologies.

The evolution of telemedicine and nano-technology

NASA Astrophysics Data System (ADS)

Park, Dong Kyun; Young Jung, Eun; Chan Moon, Byung

2012-10-01

This paper will cover definition and history of telemedicine, changes in medical paradigm and roll of telemedicine and roll of nano-technology for evolution of telemedicine. Hypothetically, telemedicine is distance communication for medical purpose and modern definition explains telemedicine as `a system of health care delivery in which physicians examine distant patients through the use of telecommunications technology. Medical service will change to personalized medicine based on gene information to prevent and manage diseases due to decrease of acute diseases, population aging and increase of prevalence in chronic diseases, which means current medical services based on manualized treatment for diseases will change to personalized medicine based on individual gene information. Also, international healthcare will be activated to provide high quality medical services with low cost using developed transportation. Moreover, hospital centered medical services will change to patients centered medical service due to increase of patient's rights. Development in sensor technology is required for telemedicine to be applied as basic infrastructure for medical services. Various researches in nano-biosensor field are conducted due to introduction of new technologies. However, most researches are in fundamental levels that requires more researches for stability and clinical usefulness. Nano technology is expected to achieve innovative development and define new criteria for disease prevention and management.

[Information technology in medical education].

PubMed

Ramić, A

1999-01-01

The role of information technology in educational models of under-graduate and post-graduate medical education is growing in 1980's influenced by PC's break-in in medical practice and creating relevant data basis, and, particularly, in 1990's by integration of information technology on international level, development of international network, Internet, Telemedicin, etc. The development of new educational information technology is evident, proving that information in transfer of medical knowledge, medical informatics and communication systems represent the base of medical practice, medical education and research in medical sciences. In relation to the traditional approaches in concept, contents and techniques of medical education, new models of education in training of health professionals, using new information technology, offer a number of benefits, such as: decentralization and access to relevant data sources, collecting and updating of data, multidisciplinary approach in solving problems and effective decision-making, and affirmation of team work within medical and non-medical disciplines. Without regard to the dynamics of change and progressive reform orientation within health sector, the development of modern medical education is inevitable for all systems a in which information technology and available data basis, as a base of effective and scientifically based medical education of health care providers, give guarantees for efficient health care and improvement of health of population.

Applying Adaptive Swarm Intelligence Technology with Structuration in Web-Based Collaborative Learning

ERIC Educational Resources Information Center

Huang, Yueh-Min; Liu, Chien-Hung

2009-01-01

One of the key challenges in the promotion of web-based learning is the development of effective collaborative learning environments. We posit that the structuration process strongly influences the effectiveness of technology used in web-based collaborative learning activities. In this paper, we propose an ant swarm collaborative learning (ASCL)…

Technological change in revitalization - Phytoremediation and the role of nonknowledge.

PubMed

Bleicher, Alena

2016-12-15

In the 1990s, remediation methods that use plants to investigate and extract contaminations were developed. According to their proponents, these technologies have considerable potential for greening remediation and to develop a more sustainable trajectory for revitalization. Although a great deal of research has been conducted on these technologies they have, so far, rarely been applied in European countries. This article will contribute a perspective from social science to this debate. By taking an approach inspired by social science practice theories, attention will be drawn to a specific socio-cultural aspect: dealing with nonknowledge. The analysis of remediation practices reveals how the phenomenon of nonknowledge becomes relevant in the process of inventing and applying new technologies. This allows for a better understanding of technological innovation processes in remediation. Based on this understanding strategies are suggested which might increase the use of plant-based technologies in remediation and site management. Copyright © 2016 Elsevier Ltd. All rights reserved.

Community-based technology transfer in rural aquaculture: the case of mudcrab Scylla serrata nursery in ponds in Northern Samar, Central Philippines.

PubMed

Baticados, Didi B; Agbayani, Renato F; Quinitio, Emilia T

2014-12-01

Finding aquaculture development approaches to open up livelihood opportunities for the rural poor and in mainstreaming smallholder fish farmers to reduce poverty remain a challenge. This paper examines the community-based technology transfer mechanism of mudcrab nursery in ponds and its socioeconomic impacts on smallholder mudcrab growers in Northern Samar, Philippines. Results indicated that the technology is a viable enterprise done by a straight culture system method, which is the rearing of crablets from <1.0 to 4.0 cm for 42 days, or by-phases. However, technology adoption hinges on many factors like area ownership, farm distance from household, and market including the type of strategy needed to enhance technology uptake. Collaboration among research and development institutions and local partners is critical in training and empowering rural communities to adopt aquaculture technologies.

An integrated system for land resources supervision based on the IoT and cloud computing

NASA Astrophysics Data System (ADS)

Fang, Shifeng; Zhu, Yunqiang; Xu, Lida; Zhang, Jinqu; Zhou, Peiji; Luo, Kan; Yang, Jie

2017-01-01

Integrated information systems are important safeguards for the utilisation and development of land resources. Information technologies, including the Internet of Things (IoT) and cloud computing, are inevitable requirements for the quality and efficiency of land resources supervision tasks. In this study, an economical and highly efficient supervision system for land resources has been established based on IoT and cloud computing technologies; a novel online and offline integrated system with synchronised internal and field data that includes the entire process of 'discovering breaches, analysing problems, verifying fieldwork and investigating cases' was constructed. The system integrates key technologies, such as the automatic extraction of high-precision information based on remote sensing, semantic ontology-based technology to excavate and discriminate public sentiment on the Internet that is related to illegal incidents, high-performance parallel computing based on MapReduce, uniform storing and compressing (bitwise) technology, global positioning system data communication and data synchronisation mode, intelligent recognition and four-level ('device, transfer, system and data') safety control technology. The integrated system based on a 'One Map' platform has been officially implemented by the Department of Land and Resources of Guizhou Province, China, and was found to significantly increase the efficiency and level of land resources supervision. The system promoted the overall development of informatisation in fields related to land resource management.

Comparison of Physics Frameworks for WebGL-Based Game Engine

NASA Astrophysics Data System (ADS)

Yogya, Resa; Kosala, Raymond

2014-03-01

Recently, a new technology called WebGL shows a lot of potentials for developing games. However since this technology is still new, there are still many potentials in the game development area that are not explored yet. This paper tries to uncover the potential of integrating physics frameworks with WebGL technology in a game engine for developing 2D or 3D games. Specifically we integrated three open source physics frameworks: Bullet, Cannon, and JigLib into a WebGL-based game engine. Using experiment, we assessed these frameworks in terms of their correctness or accuracy, performance, completeness and compatibility. The results show that it is possible to integrate open source physics frameworks into a WebGLbased game engine, and Bullet is the best physics framework to be integrated into the WebGL-based game engine.

A study of pricing and trading model of Blockchain & Big data-based Energy-Internet electricity

NASA Astrophysics Data System (ADS)

Fan, Tao; He, Qingsu; Nie, Erbao; Chen, Shaozhen

2018-01-01

The development of Energy-Internet is currently suffering from a series of issues, such as the conflicts among high capital requirement, low-cost, high efficiency, the spreading gap between capital demand and supply, as well as the lagged trading & valuation mechanism, any of which would hinder Energy-Internet's evolution. However, with the development of Blockchain and big-data technology, it is possible to work out solutions for these issues. Based on current situation of Energy-Internet and its requirements for future progress, this paper demonstrates the validity of employing blockchain technology to solve the problems encountered by Energy-Internet during its development. It proposes applying the blockchain and big-data technologies to pricing and trading energy products through Energy-Internet and to accomplish cyber-based energy or power's transformation from physic products to financial assets.

The NASA research and technology program on space power: A key element of the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

Bennett, Gary L.; Brandhorst, Henry W., Jr.; Atkins, Kenneth L.

1991-01-01

In July 1989, President Bush announced his space exploration initiative of going back to the Moon to stay and then going to Mars. Building upon its ongoing research and technology base, NASA has established an exploration technology program to develop the technologies needed for piloted missions to the Moon and Mars. A key element for the flights and for the planned bases is power. The NASA research and technology program on space power encompasses power sources, energy storage, and power management.

Application of computer virtual simulation technology in 3D animation production

NASA Astrophysics Data System (ADS)

Mo, Can

2017-11-01

In the continuous development of computer technology, the application system of virtual simulation technology has been further optimized and improved. It also has been widely used in various fields of social development, such as city construction, interior design, industrial simulation and tourism teaching etc. This paper mainly introduces the virtual simulation technology used in 3D animation. Based on analyzing the characteristics of virtual simulation technology, the application ways and means of this technology in 3D animation are researched. The purpose is to provide certain reference for the 3D effect promotion days after.

The acceptance of green technology: A case study in Sabah Development Corridor

NASA Astrophysics Data System (ADS)

Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

2017-08-01

Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

Advanced Monobore Concept, Development of CFEX Self-Expanding Tubular Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeff Spray

2007-09-30

The Advanced Monobore Concept--CFEX{copyright} Self-Expanding Tubular Technology Development was a successfully executed fundamental research through field demonstration project. This final report is presented as a progression, according to basic technology development steps. For this project, the research and development steps used were: concept development, engineering analysis, manufacturing, testing, demonstration, and technology transfer. The CFEX{copyright} Technology Development--Advanced Monobore Concept Project successfully completed all of the steps for technology development, covering fundamental research, conceptual development, engineering design, advanced-level prototype construction, mechanical testing, and downhole demonstration. Within an approximately two year period, a partially defined, broad concept was evolved into a substantial newmore » technological area for drilling and production engineering applicable a variety of extractive industries--which was also successfully demonstrated in a test well. The demonstration achievement included an actual mono-diameter placement of two self-expanding tubulars. The fundamental result is that an economical and technically proficient means of casing any size of drilling or production well or borehole is indicated as feasible based on the results of the project. Highlighted major accomplishments during the project's Concept, Engineering, Manufacturing, Demonstration, and Technology Transfer phases, are given.« less

Applied breath analysis: an overview of the challenges and opportunities in developing and testing sensor technology for human health monitoring in aerospace and clinical applications

PubMed Central

Hunter, Gary W; Dweik, Raed A

2010-01-01

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A family of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption, and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity. However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This paper gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology. Clinical applications and the potential impact to the biomedical field of miniaturized smart gas sensor technology are discussed. PMID:20622933

[Intelligent watch system for health monitoring based on Bluetooth low energy technology].

PubMed

Wang, Ji; Guo, Hailiang; Ren, Xiaoli

2017-08-01

According to the development status of wearable technology and the demand of intelligent health monitoring, we studied the multi-function integrated smart watches solution and its key technology. First of all, the sensor technology with high integration density, Bluetooth low energy (BLE) and mobile communication technology were integrated and used in develop practice. Secondly, for the hardware design of the system in this paper, we chose the scheme with high integration density and cost-effective computer modules and chips. Thirdly, we used real-time operating system FreeRTOS to develop the friendly graphical interface interacting with touch screen. At last, the high-performance application software which connected with BLE hardware wirelessly and synchronized data was developed based on android system. The function of this system included real-time calendar clock, telephone message, address book management, step-counting, heart rate and sleep quality monitoring and so on. Experiments showed that the collecting data accuracy of various sensors, system data transmission capacity, the overall power consumption satisfy the production standard. Moreover, the system run stably with low power consumption, which could realize intelligent health monitoring effectively.

Multispectral Linear Array detector technology

NASA Astrophysics Data System (ADS)

Tower, J. R.; McCarthy, B. M.; Pellon, L. E.; Strong, R. T.; Elabd, H.

1984-01-01

The Multispectral Linear Array (MLA) program sponsored by NASA has the aim to extend space-based remote sensor capabilities. The technology development effort involves the realization of very large, all-solid-state, pushbroom focal planes. The pushbroom, staring focal planes will contain thousands of detectors with the objective to provide two orders of magnitude improvement in detector dwell time compared to present Landsat mechanically scanned systems. Attenton is given to visible and near-infrared sensor development, the shortwave infrared sensor, aspects of filter technology development, the packaging concept, and questions of system performance. First-sample, four-band interference filters have been fabricated successfully, and a hybrid packaging technology is being developed.

Emerging desalination technologies for water treatment: a critical review.

PubMed

Subramani, Arun; Jacangelo, Joseph G

2015-05-15

In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption. Copyright © 2015 Elsevier Ltd. All rights reserved.

The NASA technology push towards future space mission systems

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.; Povinelli, Frederick P.; Rosen, Robert

1988-01-01

As a result of the new Space Policy, the NASA technology program has been called upon to a provide a solid base of national capabilities and talent to serve NASA's civil space program, commercial, and other space sector interests. This paper describes the new technology program structure and its characteristics, traces its origin and evolution, and projects the likely near- and far-term strategic steps. It addresses the alternative 'push-pull' approaches to technology development, the readiness levels to which the technology needs to be developed for effective technology transfer, and the focused technology programs currently being implemented to satisfy the needs of future space systems.

Public health and valorization of genome-based technologies: a new model.

PubMed

Lal, Jonathan A; Schulte In den Bäumen, Tobias; Morré, Servaas A; Brand, Angela

2011-12-05

The success rate of timely translation of genome-based technologies to commercially feasible products/services with applicability in health care systems is significantly low. We identified both industry and scientists neglect health policy aspects when commercializing their technology, more specifically, Public Health Assessment Tools (PHAT) and early on involvement of decision makers through which market authorization and reimbursements are dependent. While Technology Transfer (TT) aims to facilitate translation of ideas into products, Health Technology Assessment, one component of PHAT, for example, facilitates translation of products/processes into healthcare services and eventually comes up with recommendations for decision makers. We aim to propose a new model of valorization to optimize integration of genome-based technologies into the healthcare system. The method used to develop our model is an adapted version of the Fish Trap Model and the Basic Design Cycle. We found although different, similarities exist between TT and PHAT. Realizing the potential of being mutually beneficial justified our proposal of their relative parallel initiation. We observed that the Public Health Genomics Wheel should be included in this relative parallel activity to ensure all societal/policy aspects are dealt with preemptively by both stakeholders. On further analysis, we found out this whole process is dependent on the Value of Information. As a result, we present our LAL (Learning Adapting Leveling) model which proposes, based on market demand; TT and PHAT by consultation/bi-lateral communication should advocate for relevant technologies. This can be achieved by public-private partnerships (PPPs). These widely defined PPPs create the innovation network which is a developing, consultative/collaborative-networking platform between TT and PHAT. This network has iterations and requires learning, assimilating and using knowledge developed and is called absorption capacity. We hypothesize that the higher absorption capacity, higher success possibility. Our model however does not address the phasing out of technology although we believe the same model can be used to simultaneously phase out a technology. This model proposes to facilitate optimization/decrease the timeframe of integration in healthcare. It also helps industry and researchers to come to a strategic decision at an early stage, about technology being developed thus, saving on resources, hence minimizing failures.

Methodolgy For Evaluation Of Technology Impacts In Space Electric Power Systems

NASA Technical Reports Server (NTRS)

Holda, Julie

2004-01-01

The Analysis and Management branch of the Power and Propulsion Office at NASA Glenn Research Center is responsible for performing complex analyses of the space power and In-Space propulsion products developed by GRC. This work quantifies the benefits of the advanced technologies to support on-going advocacy efforts. The Power and Propulsion Office is committed to understanding how the advancement in space technologies could benefit future NASA missions. They support many diverse projects and missions throughout NASA as well as industry and academia. The area of work that we are concentrating on is space technology investment strategies. Our goal is to develop a Monte-Carlo based tool to investigate technology impacts in space electric power systems. The framework is being developed at this stage, which will be used to set up a computer simulation of a space electric power system (EPS). The outcome is expected to be a probabilistic assessment of critical technologies and potential development issues. We are developing methods for integrating existing spreadsheet-based tools into the simulation tool. Also, work is being done on defining interface protocols to enable rapid integration of future tools. Monte Carlo-based simulation programs for statistical modeling of the EPS Model. I decided to learn and evaluate Palisade's @Risk and Risk Optimizer software, and utilize it's capabilities for the Electric Power System (EPS) model. I also looked at similar software packages (JMP, SPSS, Crystal Ball, VenSim, Analytica) available from other suppliers and evaluated them. The second task was to develop the framework for the tool, in which we had to define technology characteristics using weighing factors and probability distributions. Also we had to define the simulation space and add hard and soft constraints to the model. The third task is to incorporate (preliminary) cost factors into the model. A final task is developing a cross-platform solution of this framework.

Smart Water: Energy-Water Optimization in Drinking Water Systems

EPA Science Inventory

This project aims to develop and commercialize a Smart Water Platform – Sensor-based Data-driven Energy-Water Optimization technology in drinking water systems. The key technological advances rely on cross-platform data acquisition and management system, model-based real-time sys...

Vibration isolation technology: An executive summary of systems development and demonstration

NASA Technical Reports Server (NTRS)

Grodsinsky, Carlos M.; Logsdon, Kirk A.; Lubomski, Joseph F.

1993-01-01

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Vibration isolation technology - An executive summary of systems development and demonstration

NASA Astrophysics Data System (ADS)

Grodsinsky, C. M.; Logsdon, K. A.; Lubomski, J. F.

1993-01-01

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Flexible MEMS: A novel technology to fabricate flexible sensors and electronics

NASA Astrophysics Data System (ADS)

Tu, Hongen

This dissertation presents the design and fabrication techniques used to fabricate flexible MEMS (Micro Electro Mechanical Systems) devices. MEMS devices and CMOS(Complementary Metal-Oxide-Semiconductor) circuits are traditionally fabricated on rigid substrates with inorganic semiconductor materials such as Silicon. However, it is highly desirable that functional elements like sensors, actuators or micro fluidic components to be fabricated on flexible substrates for a wide variety of applications. Due to the fact that flexible substrate is temperature sensitive, typically only low temperature materials, such as polymers, metals, and organic semiconductor materials, can be directly fabricated on flexible substrates. A novel technology based on XeF2(xenon difluoride) isotropic silicon etching and parylene conformal coating, which is able to monolithically incorporate high temperature materials and fluidic channels, was developed at Wayne State University. The technology was first implemented in the development of out-of-plane parylene microneedle arrays that can be individually addressed by integrated flexible micro-channels. These devices enable the delivery of chemicals with controlled temporal and spatial patterns and allow us to study neurotransmitter-based retinal prosthesis. The technology was further explored by adopting the conventional SOI-CMOS processes. High performance and high density CMOS circuits can be first fabricated on SOI wafers, and then be integrated into flexible substrates. Flexible p-channel MOSFETs (Metal-Oxide-Semiconductor Field-Effect-Transistors) were successfully integrated and tested. Integration of pressure sensors and flow sensors based on single crystal silicon has also been demonstrated. A novel smart yarn technology that enables the invisible integration of sensors and electronics into fabrics has been developed. The most significant advantage of this technology is its post-MEMS and post-CMOS compatibility. Various high-performance MEMS devices and electronics can be integrated into flexible substrates. The potential of our technology is enormous. Many wearable and implantable devices can be developed based on this technology.

Embedding technology into inter-professional best practices in home safety evaluation.

PubMed

Burns, Suzanne Perea; Pickens, Noralyn Davel

2017-08-01

To explore inter-professional home evaluators' perspectives and needs for building useful and acceptable decision-support tools for the field of home modifications. Twenty semi-structured interviews were conducted with a range of home modification professionals from different regions of the United States. The interview transcripts were analyzed with a qualitative, descriptive, perspective approach. Technology supports current best practice and has potential to inform decision making through features that could enhance home evaluation processes, quality, efficiency and inter-professional communication. Technological advances with app design have created numerous opportunities for the field of home modifications. Integrating technology and inter-professional best practices will improve home safety evaluation and intervention development to meet client-centred and societal needs. Implications for rehabilitation Understanding home evaluators technology needs for home safety evaluations contributes to the development of app-based assessments. Integrating inter-professional perspectives of best practice and technological needs in an app for home assessments improves processes. Novice and expert home evaluators would benefit from decision support systems embedded in app-based assessments. Adoption of app-based assessment would improve efficiency while remaining client-centred.

Integration of advanced technologies to enhance problem-based learning over distance: Project TOUCH.

PubMed

Jacobs, Joshua; Caudell, Thomas; Wilks, David; Keep, Marcus F; Mitchell, Steven; Buchanan, Holly; Saland, Linda; Rosenheimer, Julie; Lozanoff, Beth K; Lozanoff, Scott; Saiki, Stanley; Alverson, Dale

2003-01-01

Distance education delivery has increased dramatically in recent years as a result of the rapid advancement of communication technology. The National Computational Science Alliance's Access Grid represents a significant advancement in communication technology with potential for distance medical education. The purpose of this study is to provide an overview of the TOUCH project (Telehealth Outreach for Unified Community Health; http://hsc.unm.edu/touch) with special emphasis on the process of problem-based learning case development for distribution over the Access Grid. The objective of the TOUCH project is to use emerging Internet-based technology to overcome geographic barriers for delivery of tutorial sessions to medical students pursuing rotations at remote sites. The TOUCH project also is aimed at developing a patient simulation engine and an immersive virtual reality environment to achieve a realistic health care scenario enhancing the learning experience. A traumatic head injury case is developed and distributed over the Access Grid as a demonstration of the TOUCH system. Project TOUCH serves as an example of a computer-based learning system for developing and implementing problem-based learning cases within the medical curriculum, but this system should be easily applied to other educational environments and disciplines involving functional and clinical anatomy. Future phases will explore PC versions of the TOUCH cases for increased distribution. Copyright 2003 Wiley-Liss, Inc.

Community Outreach Projects as a Sustainable Way of Introducing Information Technology in Developing Countries

ERIC Educational Resources Information Center

Zlotnikova, Irina; van der Weide, Theo

2015-01-01

The paper describes an approach to the sustainable introduction of IT in developing countries based on international collaboration between students taking the form of a knowledge bridge. The authors consider the challenges for introducing information technologies in developing countries; one of these is lack of reading materials ultimately leading…

Installation Restoration Program. Phase II: Stage 1 Problem Confirmation Study, Duluth International Airport, Duluth, Minnesota.

DTIC Science & Technology

1984-10-01

8 iii "i t-. Table of Contents (cont.) Section Title Page -APPENDIX A Acronyms, Definitions, Nomenclature and Units of Measure B Scope of Work, Task...Identification/Records Search Phase II - Problem Confirmation and Quantification Phase III - Technology Base Development Phase IV - Corrective Action Only...Problem Identification/Records Search Phase II - Problem Confirmation and Quantification Phase III - Technology Base Development Phase IV - Corrective

Implementing Virtual Reality Technology as an Effective WEB Based KIOSK: Darulaman's Teacher Training College Tour (IPDA VR Tour)

ERIC Educational Resources Information Center

Azman, Fadzil

2004-01-01

At present the development of Virtual Reality (VR) technology is expanding due to the importance and needs to use the 3D elements and 360 degrees panorama. In expressing a clearer picture to consumers in various fields such as education, military, medicine, entertainment and so on. In live with the development the web based VR kiosk project in…

Next Generation Life Support Project Status

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Chullen, Cinda; Pickering, Karen D.; Cox, Marlon; Towsend, Neil; Campbell, Colin; Flynn, Michael; Wheeler, Raymond

2012-01-01

Next Generation Life Support (NGLS) is one of several technology development projects sponsored by NASA s Game Changing Development Program. The NGLS Project is developing life support technologies (including water recovery and space suit life support technologies) needed for humans to live and work productively in space. NGLS has three project tasks: Variable Oxygen Regulator (VOR), Rapid Cycle Amine (RCA) swing bed, and Alternative Water Processor (AWP). The RCA swing bed and VOR tasks are directed at key technology needs for the Portable Life Support System (PLSS) for an Advanced Extravehicular Mobility Unit, with focus on test article development and integrated testing in an Advanced PLSS in cooperation with the Advanced Extra Vehicular Activity (EVA) Project. An RCA swing-bed provides integrated carbon dioxide removal and humidity control that can be regenerated in real time during an EVA. The VOR technology will significantly increase the number of pressure settings available to the space suit. Current space suit pressure regulators are limited to only two settings whereas the adjustability of the advanced regulator will be nearly continuous. The AWP effort, based on natural biological processes and membrane-based secondary treatment, will result in the development of a system capable of recycling wastewater from sources expected in future exploration missions, including hygiene and laundry water. This paper will provide a status of technology development activities and future plans.

Research on numerical control system based on S3C2410 and MCX314AL

NASA Astrophysics Data System (ADS)

Ren, Qiang; Jiang, Tingbiao

2008-10-01

With the rapid development of micro-computer technology, embedded system, CNC technology and integrated circuits, numerical control system with powerful functions can be realized by several high-speed CPU chips and RISC (Reduced Instruction Set Computing) chips which have small size and strong stability. In addition, the real-time operating system also makes the attainment of embedded system possible. Developing the NC system based on embedded technology can overcome some shortcomings of common PC-based CNC system, such as the waste of resources, low control precision, low frequency and low integration. This paper discusses a hardware platform of ENC (Embedded Numerical Control) system based on embedded processor chip ARM (Advanced RISC Machines)-S3C2410 and DSP (Digital Signal Processor)-MCX314AL and introduces the process of developing ENC system software. Finally write the MCX314AL's driver under the embedded Linux operating system. The embedded Linux operating system can deal with multitask well moreover satisfy the real-time and reliability of movement control. NC system has the advantages of best using resources and compact system with embedded technology. It provides a wealth of functions and superior performance with a lower cost. It can be sure that ENC is the direction of the future development.

Optics Design for the U.S. SKA Technology Development Project Design Verification Antenna

NASA Technical Reports Server (NTRS)

Imbriale, W. A.; Baker, L.; Cortes-Medellin, G.

2012-01-01

The U.S. design concept for the Square Kilometer Array (SKA) program is based on utilizing a large number of 15 meter dish antennas. The Technology Development Project (TDP) is planning to design and build the first of these antennas to provide a demonstration of the technology and a solid base on which to estimate costs. This paper describes the performance of the selected optics design. It is a dual-shaped offset Gregorian design with a feed indexer that can accommodate corrugated horns, wide band single pixel feeds or phased array feeds.

Precision Laser Development for Interferometric Space Missions NGO, SGO, and GRACE Follow-On

NASA Technical Reports Server (NTRS)

Numata, Kenji; Camp, Jordan

2011-01-01

Optical fiber and semiconductor laser technologies have evolved dramatically over the last decade due to the increased demands from optical communications. We are developing a laser (master oscillator) and optical amplifier based on those technologies for interferometric space missions, including the gravitational-wave missions NGO/SGO (formerly LISA) and the climate monitoring mission GRACE Follow-On, by fully utilizing the matured wave-guided optics technologies. In space, where simpler and more reliable system is preferred, the wave-guided components are advantageous over bulk, crystal-based, free-space laser, such as NPRO (Nonplanar Ring Oscillator) and bulk-crystal amplifier.

Biomedical Investigations with Laser-Polarized Noble Gas Magnetic Resonance

NASA Technical Reports Server (NTRS)

Walsworth, Ronald L.

2003-01-01

We pursued advanced technology development of laser-polarized noble gas nuclear magnetic resonance (NMR) as a novel biomedical imaging tool for ground-based and eventually space-based application. This new multidisciplinary technology enables high-resolution gas-space magnetic resonance imaging (MRI)-e.g., of lung ventilation-as well as studies of tissue perfusion. In addition, laser-polarized noble gases (3He and 129Xe) do not require a large magnetic field for sensitive detection, opening the door to practical MRI at very low magnetic fields with an open, lightweight, and low-power device. We pursued two technology development specific aims: (1) development of low-field (less than 0.01 T) noble gas MRI of humans; and (2) development of functional MRI of the lung using laser-polarized noble gas and related techniques.

Space-based societal applications—Relevance in developing countries

NASA Astrophysics Data System (ADS)

Bhaskaranarayana, A.; Varadarajan, C.; Hegde, V. S.

2009-11-01

Space technology has the vast potential for addressing a variety of societal problems of the developing countries, particularly in the areas of communication, education and health sectors, land and water resources management, disaster management and weather forecasting. Both remote sensing and communication technologies can be used to achieve this goal. With its primary emphasis on application of space technology, on an end-to-end basis, towards national development, the Indian Space Programme has distinguished itself as one of the most cost-effective and development-oriented space programmes in the world. Developing nations are faced with the enormous task of carrying development-oriented education to the masses at the lower strata of their societies. One important feature of these populations is their large number and the spread over vast and remote areas of these nations, making the reaching out to them a difficult task. Satellite communication (Satcom) technology offers the unique capability of simultaneously reaching out to very large numbers, spread over vast areas, including the remote corners of the country. It is a strong tool to support development education. India has been amongst the first few nations to explore and put to use the Satcom technology for education and development-oriented services to the rural masses. Most of the developing countries have inadequate infrastructure to provide proper medical care to the rural population. Availability of specialist doctors in rural areas is a major bottleneck. Use of Satcom and information technology to connect rural clinics to urban hospitals through telemedicine systems is one of the solutions; and India has embarked upon an effective satellite-based telemedicine programme. Space technology is also useful in disaster warning and management related applications. Use of satellite systems and beacons for locating the distressed units on land, sea or air is well known to us. Indian Space Research Organisation (ISRO) is already a part of the International initiative called Satellite Aided Search and Rescue System. The programme to set up satellite-based Village Resource Centres (VRCs) across India, for providing a variety of services relevant to the rural communities, is also a unique societal application of space technology. The VRCs are envisaged as single window delivery mechanism for a variety of space-based products and services, such as tele-education; telemedicine; information on natural resources for planning and development at local level; interactive advisories on agriculture, fisheries, land and water resources management, livestock management, etc.; interactive vocational training towards alternative livelihood; e-governance; weather information; etc. This paper describes the various possibilities and potentials of Satcom and Remote Sensing technologies for societal applications. The initiatives taken by Indian Space Research Organisation in this direction are highlighted.

Commercializing Defense Technologies and Helping Defense Firms Succeed in Commercial Markets: A Report on the Objectives, Activities, and Accomplishments of the TAP-IN Program

NASA Technical Reports Server (NTRS)

1997-01-01

Technology Access for Product Innovation (TAP-IN), the largest technology deployment project funded by TRP, was competitively selected through a national solicitation for proposals. TAP-IN was created to help companies access and apply defense technologies and help defense-dependent companies enter new commercial markets. Defense technologies included technologies developed by DoD, DOE, NASA, and their contractors. TAP-IN was structured to provide region-based technology access services that were able to draw on technology resources nationwide. TAP-IN provided expert assistance in all stages of the commercialization process from concept through prototype design to capital sourcing and marketing strategy. TAP-IN helped companies locate new technology, identify business partners, secure financing, develop ideas for new products, identify new markets, license technology, solve technical problems, and develop company-specific applications of federal technology. TAP-IN leveraged NASA's existing commercial technology network to create an integrated national network of organizations that assisted companies in every state. In addition to NASA's six regional technology transfer centers (RTTCs), TAP-IN included business and technology development organizations in every state, the Industrial Designers Society of America, and the Federal Laboratory Consortium (FLC).

Ratio Based Biomarkers for the Prediction of Cancer Survival | NCI Technology Transfer Center | TTC

Cancer.gov

The NCI seeks licensees or co-development partners for this technology, which describes compositions, methods and kits for identifying, characterizing biomolecules expressed in a sample that are associated with the presence, the development, or progression of cancer.

Space-based solar power conversion and delivery systems study. Volume 5: Economic analysis

NASA Technical Reports Server (NTRS)

1977-01-01

Space-based solar power conversion and delivery systems are studied along with a variety of economic and programmatic issues relevant to their development and deployment. The costs, uncertainties and risks associated with the current photovoltaic Satellite Solar Power System (SSPS) configuration, and issues affecting the development of an economically viable SSPS development program are addressed. In particular, the desirability of low earth orbit (LEO) and geosynchronous (GEO) test satellites is examined and critical technology areas are identified. The development of SSPS unit production (nth item), and operation and maintenance cost models suitable for incorporation into a risk assessment (Monte Carlo) model (RAM) are reported. The RAM was then used to evaluate the current SSPS configuration expected costs and cost-risk associated with this configuration. By examining differential costs and cost-risk as a function of postulated technology developments, the critical technologies, that is, those which drive costs and/or cost-risk, are identified. It is shown that the key technology area deals with productivity in space, that is, the ability to fabricate and assemble large structures in space, not, as might be expected, with some hardware component technology.

Innovation in dental education: The "On-the-Fly" approach to simultaneous development, implementation and evidence collection.

PubMed

de Boer, I R; Bakker, D R; Serrano, C M; Koopman, P; Wesselink, P R; Vervoorn, J M

2018-03-01

This study outlines an approach for education innovation and addresses the ambivalence between evidence-based and non-evidence-based conditions. The "on-the-fly" approach was described as involving implementation during the development of an innovation for dental education. The process of designing and implementing cutting-edge technology of the MOOG Simodont Dental Trainer (DT) whilst systematically collecting evidence illustrates the "on-the-fly" approach. Using the "on-the-fly" approach for developing, implementing and collecting evidence simultaneously in an academic environment appears feasible in serving both the professionals, users and developers and system designers. During the implementation of the new technology, growing evidence stepwise strengthened its position; therefore, showing stakeholders that evidence was used to improve the technology seemed to support and increase acceptance of the new technology. When pioneering an innovative technology in a specialty field, the development stage often precedes evidence for its effectiveness. Consciously choosing the "on-the-fly" approach clarifies to stakeholders in advance about the lack of evidence in an innovation and the need of their support to collect such evidence for improvement and in order to facilitate implementation. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Study on Network Examinational Database based on ASP Technology

NASA Astrophysics Data System (ADS)

Zhang, Yanfu; Han, Yuexiao; Zhou, Yanshuang

This article introduces the structure of the general test base system based on .NET technology, discussing the design of the function modules and its implementation methods. It focuses on key technology of the system, proposing utilizing the WEB online editor control to solve the input problem and regular expression to solve the problem HTML code, making use of genetic algorithm to optimize test paper and the automated tools of WORD to solve the problem of exporting papers and others. Practical effective design and implementation technology can be used as reference for the development of similar systems.

Advances in the Psychosocial Treatment of Addiction

PubMed Central

Dallery, Jesse

2012-01-01

Synopsis The authors present an overview of empirically supported psychosocial interventions for individuals with substance use disorders (SUDs), including recent advances in the field. They also identify barriers to the adoption of evidence-based psychosocial treatments in community-based systems of care, and the promise of leveraging technology (computers, web, mobile phone, and emerging technologies) to markedly enhance the reach of these treatments. Technology-based interventions may provide “on-demand,” ubiquitous access to therapeutic support in diverse settings. A brief discussion of important next steps in developing, refining, and disseminating technology-delivered psychosocial interventions concludes the review. PMID:22640767

The NASA modern technology rotors program

NASA Technical Reports Server (NTRS)

Watts, M. E.; Cross, J. L.

1986-01-01

Existing data bases regarding helicopters are based on work conducted on 'old-technology' rotor systems. The Modern Technology Rotors (MTR) Program is to provide extensive data bases on rotor systems using present and emerging technology. The MTR is concerned with modern, four-bladed, rotor systems presently being manufactured or under development. Aspects of MTR philosophy are considered along with instrumentation, the MTR test program, the BV 360 Rotor, and the UH-60 Black Hawk. The program phases include computer modelling, shake test, model-scale test, minimally instrumented flight test, extensively pressure-instrumented-blade flight test, and full-scale wind tunnel test.

Research to practice in addiction treatment: key terms and a field-driven model of technology transfer.

PubMed

2011-09-01

The transfer of new technologies (e.g., evidence-based practices) into substance abuse treatment organizations often occurs long after they have been developed and shown to be effective. Transfer is slowed, in part, due to a lack of clear understanding about all that is needed to achieve full implementation of these technologies. Such misunderstanding is exacerbated by inconsistent terminology and overlapping models of an innovation, including its development and validation, dissemination to the public, and implementation or use in the field. For this reason, a workgroup of the Addiction Technology Transfer Center (ATTC) Network developed a field-driven conceptual model of the innovation process that more precisely defines relevant terms and concepts and integrates them into a comprehensive taxonomy. The proposed definitions and conceptual framework will allow for improved understanding and consensus regarding the distinct meaning and conceptual relationships between dimensions of the technology transfer process and accelerate the use of evidence-based practices. Copyright © 2011 Elsevier Inc. All rights reserved.

Development Principles of the Pedagogical System Aimed at Bachelor Training Based on Modern Information Technology

ERIC Educational Resources Information Center

Kurymbayev, Sayat G.; Samashova, Gulfarida E.; Alshynbayeva, Zhuldyz E.; Mukhametzhanova, Aigul O.; Sharazdin, Adilzada M.; Kalybekova, Kalamkas S.; Kosybaeva, Umitzhan A.

2016-01-01

Modern education is aimed at training competent specialists, which requires modernizing the training process by implementing innovative technologies, especially information technologies. Information technologies allow quickly accessing necessary data, which speeds up the training process. This paper deals with issues related to training bachelors…

Technological Pedagogical Content Knowledge Development: Integrating Technology with a Research Teaching Perspective

ERIC Educational Resources Information Center

Guerra, Cecilia; Moreira, Antonio; Vieira, Rui

2017-01-01

Technological Pedagogical Content Knowledge (TPCK) represents the teachers' professional knowledge needed to integrate technology in education. Following a design-based approach this study describes the strategies for designing and assessing an in-service science teacher education course. Data was obtained through interviews, questionnaires, using…

University Researchers Contributing to Technology Markets 1900-85. A Long-Term Analysis of Academic Patenting in Finland

ERIC Educational Resources Information Center

Kaataja, Sampsa

2011-01-01

Regardless of the increased interest in technological innovation in universities, relatively little is known about the technology developed by academic scientists. Long-term analyses of researchers' technological contribution are notably missing. This paper examines university-based technology in Finland during the period 1900-85. The focus is on…

Technological Leadership Behavior of Elementary School Principals in the Process of Supply and Use of Educational Technologies

ERIC Educational Resources Information Center

Sisman Eren, Esra; Kurt, Adile Askim

2011-01-01

The purpose of this study is to examine the technological leadership behaviors of Turkish elementary school regarding the supply and use of educational technologies based on the national educational technology standards developed and approved for school principals in many countries. The study was carried out with 870 elementary school principals…

Applied technology center business plan and market survey

NASA Technical Reports Server (NTRS)

Hodgin, Robert F.; Marchesini, Roberto

1990-01-01

Business plan and market survey for the Applied Technology Center (ATC), computer technology transfer and development non-profit corporation, is presented. The mission of the ATC is to stimulate innovation in state-of-the-art and leading edge computer based technology. The ATC encourages the practical utilization of late-breaking computer technologies by firms of all variety.

Using Technology to Improve Treatment Outcomes for Children and Adolescents with Eating Disorders.

PubMed

Darcy, Alison M; Lock, James

2017-01-01

Dissemination and implementation of evidence-based treatments are among the biggest challenges facing clinical psychiatry. Developing scalable evidence-based treatments is a major priority and fraught with challenges. This article describes the development of 3 technology-based innovations. It discusses the use of massive open online courses (MOOCs) and mobile applications. Three projects are presented: (1) the modification of a MOOC methodology for psychotherapy training clinicians in manualized family-based therapy (FBT) for adolescents with anorexia nervosa; (2) a modified MOOC platform for the delivery of FBT; and (3) the development of mobile applications for treatment augmentation and delivery. Copyright © 2016 Elsevier Inc. All rights reserved.

NIST biometric evaluations and developments

NASA Astrophysics Data System (ADS)

Garris, Michael D.; Wilson, Charles L.

2005-05-01

This paper presents an R&D framework used by the National Institute of Standards and Technology (NIST) for biometric technology testing and evaluation. The focus of this paper is on fingerprint-based verification and identification. Since 9-11 the NIST Image Group has been mandated by Congress to run a program for biometric technology assessment and biometric systems certification. Four essential areas of activity are discussed: 1) developing test datasets, 2) conducting performance assessment; 3) technology development; and 4) standards participation. A description of activities and accomplishments are provided for each of these areas. In the process, methods of performance testing are described and results from specific biometric technology evaluations are presented. This framework is anticipated to have broad applicability to other technology and application domains.

Technology Foresight and nuclear test verification: a structured and participatory approach

NASA Astrophysics Data System (ADS)

Noack, Patrick; Gaya-Piqué, Luis; Haralabus, Georgios; Auer, Matthias; Jain, Amit; Grenard, Patrick

2013-04-01

As part of its mandate, the CTBTO's nuclear explosion monitoring programme aims to maintain its sustainability, effectiveness and its long-term relevance to the verification regime. As such, the PTS is conducting a Technology Foresight programme of activities to identify technologies, processes, concepts and ideas that may serve said purpose and become applicable within the next 20 years. Through the Technology Foresight activities (online conferences, interviews, surveys, workshops and other) we have involved the wider science community in the fields of seismology, infrasound, hydroacoustics, radionuclide technology, remote sensing and geophysical techniques. We have assembled a catalogue of over 200 items, which incorporate technologies, processes, concepts and ideas which will have direct future relevance to the IMS (International Monitoring System), IDC (International Data Centre) and OSI (On-Site Inspection) activities within the PTS. In order to render this catalogue as applicable and useful as possible for strategy and planning, we have devised a "taxonomy" based on seven categories, against which each technology is assessed through a peer-review mechanism. These categories are: 1. Focus area of the technology in question: identify whether the technology relates to (one or more of the following) improving our understanding of source and source physics; propagation modelling; data acquisition; data transport; data processing; broad modelling concepts; quality assurance and data storage. 2. Current Development Stage of the technology in question. Based on a scale from one to six, this measure is specific to PTS needs and broadly reflects Technology Readiness Levels (TRLs). 3. Impact of the technology on each of the following capabilities: detection, location, characterization, sustainment and confidence building. 4. Development cost: the anticipated monetary cost of validating a prototype (i.e. Development Stage 3) of the technology in question. 5. Time to maturity: the number of years until the technology in question reaches Development Stage 3 (i.e. prototype validated). 6. Integration effort: the anticipated level of effort required by the PTS to fully integrate the technology, process, concept or idea into is verification environment. 7. Time to impact: the number of years until the technology is fully developed and integrated into the PTS verification environment and delivers on its full potential. The resulting database is coupled to Pivot, a novel information management software tool which offers powerful visualisation of the taxonomy's parameters for each technology. Pivot offers many advantages over conventional spreadhseet-interfaced database tools: based on shared categories in the taxonomy, users can quickly and intuitively discover linkages, communalities and various interpretations about prospective CTBT pertinent technologies. It is easily possible to visualise a resulting sub-set of technologies that conform to the specific user-selected attributes from the full range of taxonomy categories. In this presentation we will illustrate the range of future technologies, processes, concepts and ideas; we will demonstrate how the Pivot tool can be fruitfully applied to assist in strategic planning and development, and to identify gaps apparent on the technology development horizon. Finally, we will show how the Pivot tool together with the taxonomy offer real and emerging insights to make sense of large amounts of disparate technologies.

Simulating Technology Processes to Foster Learning.

ERIC Educational Resources Information Center

Krumholtz, Nira

1998-01-01

Based on a spiral model of technology evolution, elementary students used LOGO computer software to become both developers and users of technology. The computerized environment enabled 87% to reach intuitive understanding of physical concepts; 24% expressed more formal scientific understanding. (SK)

DEMONSTRATION BULLETIN: MEMBRANE FILTRATION - SBP TECHNOLOGIES, INC.

EPA Science Inventory

SBP Technologies Inc. (SBP) has developed a membrane-based separation technology that can reduce the volume of contaminated groundwater requiring treatment. The SBP Filtration Unit consists of porous, sintered, stainless steel tubes arranged in a shell-and-tube module configurati...

Operational Lessons Leaned During bioreactor Demonstrations for Acid Rock Drainage Treatment

EPA Science Inventory

The U.S. Environmental Protection Agency's Mine Waste Technology Program (MWTP) has emphasized the development of biologically-based treatment technologies for acid rock drainage (ARD). Progressively evolving technology demonstrations have resulted in significant advances in sulf...

The California Central Coast Research Partnership: Building Relationships, Partnerships and Paradigms for University-Industry Research Collaboration (Abridged Version)

DTIC Science & Technology

2004-04-21

3-4 B. Strategic location ...........................................................................................5 C. Relevant R&D...and technology-based business sectors. The plan recognizes the key role of higher education in preparing a highly skilled work force and transferring...University technology R&D activities; the development of existing technology-based businesses and the creation of new ones; and the generation of

The Role of Motive Objects in Early Childhood Teacher Development Concerning Children's Digital Play and Play-Based Learning in Early Childhood Curricula

ERIC Educational Resources Information Center

Nuttall, Joce; Edwards, Susan; Mantilla, Ana; Grieshaber, Sue; Wood, Elizabeth

2015-01-01

Digital technologies are increasingly accepted as a viable aspect of early childhood curriculum. However, teacher uptake of digital technologies in early childhood education and their use with young children in play-based approaches to learning have not been strong. Traditional approaches to the problem of teacher uptake of digital technologies in…

Harbin Institute of Technology collaborative base project at APS of Argonne

NASA Astrophysics Data System (ADS)

Liu, H.; Liu, L. L.

2013-05-01

In this paper, the progress of Harbin Institute of Technology (HIT) collaborative base project, which was launched at Argonne National Laboratory in 2010, will be presented. The staff and students from HIT involved in advanced technological developments, which included tomography, high energy PDF, diffraction and scattering, and inelastic scattering techniques in APS to study structures changes of minerals and materials under high pressure conditions.

The Effects of Integrating Mobile and CAD Technology in Teaching Design Process for Malaysian Polytechnic Architecture Student in Producing Creative Product

ERIC Educational Resources Information Center

Hassan, Isham Shah; Ismail, Mohd Arif; Mustapha, Ramlee

2010-01-01

The purpose of this research is to examine the effect of integrating the digital media such as mobile and CAD technology on designing process of Malaysian polytechnic architecture students in producing a creative product. A website is developed based on Caroll's minimal theory, while mobile and CAD technology integration is based on Brown and…

Proceedings of Selected Research and Development Presentations at the 1997 National Convention of the Association for Educational Communications and Technology Sponsored by the Research and Theory Division (19th, Albuquerque, NM, February 14-18, 1997).

ERIC Educational Resources Information Center

Abel, Omalley, Ed.; And Others

1997-01-01

This proceedings volume contains 57 papers. Subjects addressed include: cooperative technology education; children's learning strategies with hypermedia lessons; problem-based learning; instructional methodologies for lifelong learning; interactive television (ITV) design; theoretical bases for Human Performance Technology (HPT); use of cognitive…

Combining Project-based Instruction, Earth Science Content, and GIS Technology in Teacher Professional Development: Is this Holistic Approach Sustainable?

NASA Astrophysics Data System (ADS)

Rubino-Hare, L.; Bloom, N.; Claesgens, J.; Fredrickson, K.; Henderson-Dahms, C.; Sample, J. C.

2012-12-01

From 2009-2011, with support from the National Science Foundation (ITEST, DRL-0929846) and Science Foundation Arizona (MSAG-0412-09), educators, geologists and geographers at Northern Arizona University (NAU) partnered to offer professional development for interdisciplinary teams of secondary and middle school teachers with a focus on project-based instruction (PBI) using geospatial technologies (GST). While participating in professional development teachers received support and were held accountable to NAU staff. They implemented activities and pedagogical strategies presented, increased knowledge, skills, and confidence teaching with project-based instruction integrating GST, and their students demonstrated learning gains. Changes in student understanding are only observed when teachers continue to implement change, so the question remained: did these changes in practice sustain after official project support ended? In order to determine what, if anything, teachers sustained from the professional development and the factors that promoted or hindered sustained use of teaching with GST and PBI, data were collected one to two years following the professional development. Research questions included a) what pedagogical practices did teachers sustain following the professional learning experiences? and b) what contexts were present in schools that supported or limited the use of geospatial technologies as a teaching and learning tool? Findings from this study indicate that teachers fall into three categories of sustaining implementation - reformed implementers, mechanical implementers and non-implementers. School context was less of a factor in level of implementation than teachers' beliefs and philosophy of teaching and teachers' understanding of technology integration (teaching with technology vs. teaching technology). Case studies of teacher experiences will be presented along with implications for future professional development.

[Development and perspective of bio-based chemical fiber industry].

PubMed

Li, Zengjun

2016-06-25

Bio-based fiber is environment friendly, reproducible, easily biodegradable. Therefore, rapid development of bio-based fiber industry is an obvious in progress to replace petrochemical resources, develop sustainable economy, build resource saving and environment friendly society. This article describes the current development of bio-based fiber industry, analyzes existing problems, indicates the trends and objectives of bio-based fiber materials technology innovation and recommends developing bio-based fibers industry of our country.

Tissue engineering: confronting the transplantation crisis.

PubMed

Nerem, R M

2000-01-01

Tissue engineering is the development of biological substitutes and/or the fostering of tissue regeneration/remodelling. It is emerging as a technology which has the potential to confront the crisis in transplantation caused by the shortage of donor tissues and organs. With the development of this technology, ther is emerging a new industry which is at the interface of biotechnology and the traditional medical implant field. For this technology and the associated industry to realize their full potential, there are core, enabling technologies that need to be developed. This is the focus of the Georgia Tech/Emory Center for the Engineering of Living Tissues, newly established in the United States, with an Engineering Research Center Award from the National Science Foundation. With the development of these core technologies, tissue engineering will evolve from an art form to a technology based on science and engineering.

Goal orientation and its relationship to academic success in a laptop-based BScN program.

PubMed

Goldsworthy, Sandra J; Goodman, Bill; Muirhead, Bill

2005-01-01

This longitudinal study, conducted within a laptop-based BScN program examines the relationship of goal orientation profiles to comfort with technology and academic success. In phase 1 of this study, 101 first year nursing students completed an on line survey. The measurement tools used were Goal Orientation Assessment, Multiple Intelligences Learning Inventory and a locally developed Technology Comfort survey. Results showed that students were predominantly high in the mastery goal orientation profile. Males had a higher comfort level with technology. Age was inversely related to comfort with technology. An unexpected finding was that grade point average was inversely related to comfort with use of technology. The data did not support the commonly held belief that today's students are uniformly well-skilled and comfortable with new technologies. This study will continue over the next three years and will allow comparison of variables over time. Specific teaching interventions may be developed to accommodate varying learning and motivational styles in relation to comfort with technology.

Translational Science by Public Biotechnology Companies in the IPO“Class of 2000”: The Impact of Technological Maturity

PubMed Central

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science. PMID:24358154

Translational science by public biotechnology companies in the IPO "class of 2000": the impact of technological maturity.

PubMed

McNamee, Laura; Ledley, Fred

2013-01-01

The biotechnology industry plays a central role in the translation of nascent biomedical science into both products that offer material health benefits and creating capital growth. This study examines the relationship between the maturity of technologies in a characteristic life cycle and value creation by biotechnology companies. We examined the core technology, product development pipelines, and capitalization for a cohort of biotechnology companies that completed an IPO in 2000. Each of these companies was well financed and had core technologies on the leading edge of biological science. We found that companies with the least mature technologies had significantly higher valuations at IPO, but failed to develop products based on these technologies over the ensuing decade, and created less capital growth than companies with more mature technologies at IPO. The observation that this cohort of recently public biotechnology companies was not effective in creating value from nascent science suggests the need for new, evidence-based business strategies for translational science.

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Technical Reports Server (NTRS)

1990-01-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

Expendable launch vehicles technology: A report to the US Senate and the US House of Representatives

NASA Astrophysics Data System (ADS)

1990-07-01

As directed in Public Law 100-657, Commercial Space Launch Act Amendments of 1988, and consistent with National Space Policy, NASA has prepared a report on a potential program of research on technologies to reduce the initial and recurring costs, increase reliability, and improve performance of expendable launch vehicles for the launch of commercial and government spacecraft into orbit. The report was developed in consultation with industry and in recognition of relevant ongoing and planned NASA and DoD technology programs which will provide much of the required launch systems technology for U.S. Government needs. Additional efforts which could be undertaken to strengthen the technology base are identified. To this end, focus is on needs for launch vehicle technology development and, in selected areas, includes verification to permit private-sector new technology application at reduced risk. If such a program were to be implemented, it would entail both government and private-sector effort and resources. The additional efforts identified would augment the existing launch vehicle technology programs. The additional efforts identified have not been funded, based upon agency assessments of relative priority vis-a-vis the existing programs. Throughout the consultation and review process, the industry representatives stressed the overriding importance of continuing the DoD/NASA Advanced Launch Development activity and other government technology programs as a primary source of essential launch vehicle technology.

Technology development and innovation for the bottom of the economic pyramid

NASA Astrophysics Data System (ADS)

Gadgil, Ashok

2015-04-01

Directed development of new technologies to solve specific problems of the poor in the developing world is a daunting task. Developing countries can be a wasteland littered with failed technologies sent there with much goodwill and effort from the industrial countries. Drawing on my team's experience I summarize our answers to some key questions for the technology designer or developer: How might one go about it? What works and what doesn't? What lessons can one draw from an examination of select successes and failures? The key lessons from our experience are: (1) successful technology design and implementation can not be separated from each other - they are tightly intertwined, (2) social factors are as critical for a technology's success as factors based on engineering science, and (3) ignorance of political economy, behavioral economics, organizational behavior, institutional imperatives, cultural norms and social drivers can prove fatal flaws when a new technology leaves the laboratory and meets the real world.

Ceramic Technology Project semiannual progress report, October 1992--March 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.

1993-09-01

This project was developed to meet the ceramic technology requirements of the OTS`s automotive technology programs. Although progress has been made in developing reliable structural ceramics, further work is needed to reduce cost. The work described in this report is organized according to the following work breakdown structure project elements: Materials and processing (monolithics [Si nitride, carbide], ceramic composites, thermal and wear coatings, joining, cost effective ceramic machining), materials design methodology (contact interfaces, new concepts), data base and life prediction (structural qualification, time-dependent behavior, environmental effects, fracture mechanics, nondestructive evaluation development), and technology transfer.

Curriculum Development for Technology-Based Entrepreneurship Education: A Cross-Disciplinary and Cross-Cultural Approach

ERIC Educational Resources Information Center

Kazakeviciute, Agne; Urbone, Renata; Petraite, Monika

2016-01-01

University-based entrepreneurship education is facing a paradigm shift between the classical "business school" and the contemporary cross-disciplinary "technology venturing" approach, mainly advocated by engineering schools and other communities outside business schools. The conflict is between structured "business…

Holding the Edge: Maintaining the Defense Technology Base. Summary

DTIC Science & Technology

1989-04-01

Arizona CLAIBORNE PELL GEORGE E. BROWN, JR. Rhode Island California TED STEVENS JOHN D. DINGELL Alaska Michigan ORRIN G. HATCH DON SUNDQUIST Utah Tennessee...acknowledged. JON IBBONS Director Defense Technology Base Advisory Panel Walter B. Laberge , Chair Vice President of Corporate Development Lockheed Corp

Developing a Consensus-Driven, Core Competency Model to Shape Future Audio Engineering Technology Curriculum: A Web-Based Modified Delphi Study

ERIC Educational Resources Information Center

Tough, David T.

2009-01-01

The purpose of this online study was to create a ranking of essential core competencies and technologies required by AET (audio engineering technology) programs 10 years in the future. The study was designed to facilitate curriculum development and improvement in the rapidly expanding number of small to medium sized audio engineering technology…

Initial experiences with building a health care infrastructure based on Java and object-oriented database technology.

PubMed

Dionisio, J D; Sinha, U; Dai, B; Johnson, D B; Taira, R K

1999-01-01

A multi-tiered telemedicine system based on Java and object-oriented database technology has yielded a number of practical insights and experiences on their effectiveness and suitability as implementation bases for a health care infrastructure. The advantages and drawbacks to their use, as seen within the context of the telemedicine system's development, are discussed. Overall, these technologies deliver on their early promise, with a few remaining issues that are due primarily to their relative newness.

Building a Critical Components for Successful Multimedia-Based Collaborative eLearning Design Framework

ERIC Educational Resources Information Center

Asanok, M.; Kitrakan, P.; Brahmawong, C.

2008-01-01

With newly developing multimedia and web-based technologies have provided opportunities of developing a multimedia-based collaborative eLearning systems. The development of eLearning systems has started a revolution for instructional content delivering, learning activities and social communication. Based on various positions on this issue have…

An overview of ecological monitoring based on geographic information system (GIS) and remote sensing (RS) technology in China

NASA Astrophysics Data System (ADS)

Zhang, Jing; Zhang, Jia; Du, Xiangyang; Kang, Hou; Qiao, Minjuan

2017-11-01

Due to the rapid development of human economy and society, the resulting ecological problems are becoming more and more prominent, and the dynamic monitoring of the various elements in the ecosystem has become the focus of the current research. For the complex structure and function of the ecological environment monitoring, advanced technical means should be adopted. With the development of spatial information technology, the ecological monitoring technology based on GIS and RS is becoming more and more perfect, and spatial analysis will play an important role in the field of environmental protection. Based on the GIS and RS technology, this paper analyzes the general centralized ecological monitoring model, and makes an objective analysis of the current ecological monitoring trend of China. These are important for the protection and management of ecological environment in China.

Operational efficiency subpanel advanced mission control

NASA Technical Reports Server (NTRS)

Friedland, Peter

1990-01-01

Herein, the term mission control will be taken quite broadly to include both ground and space based operations as well as the information infrastructure necessary to support such operations. Three major technology areas related to advanced mission control are examined: (1) Intelligent Assistance for Ground-Based Mission Controllers and Space-Based Crews; (2) Autonomous Onboard Monitoring, Control and Fault Detection Isolation and Reconfiguration; and (3) Dynamic Corporate Memory Acquired, Maintained, and Utilized During the Entire Vehicle Life Cycle. The current state of the art space operations are surveyed both within NASA and externally for each of the three technology areas and major objectives are discussed from a user point of view for technology development. Ongoing NASA and other governmental programs are described. An analysis of major research issues and current holes in the program are provided. Several recommendations are presented for enhancing the technology development and insertion process to create advanced mission control environments.

Compact, High Power, Multi-Spectral Mid-Infrared Semiconductor Laser Package

NASA Astrophysics Data System (ADS)

Guo, Bujin; Hwang, Wen-Yen; Lin, Chich-Hsiang

2001-10-01

Through a vertically integrated effort involving atomic level material engineering, advanced device processing development, state-of-the-art optomechanical packaging, and thermal management, Applied Optoelectronics, Inc. (AOI), University of Houston (U H), and Physical Science, Inc. (PSI) have made progress in both Sb-based type-II semiconductor material and in P-based type-I laser device development. We have achieved record performance on inP based quantum cascade continuous wave (CW) laser (with more than 5 mW CW power at 210 K). Grating-coupled external-cavity quantum cascade lasers were studied for temperatures from 20 to 230 K. A tuning range of 88 nm has been obtained at 80 K. The technology can be made commercially available and represents a significant milestone with regard to the Dual Use Science and Technology (DUST) intention of fostering dual use commercial technology for defense need. AOI is the first commercial company to ship products of this licensed technology.

Green materials for sustainable development

NASA Astrophysics Data System (ADS)

Purwasasmita, B. S.

2017-03-01

Sustainable development is an integrity of multidiscipline concept combining ecological, social and economic aspects to construct a liveable human living system. The sustainable development can be support through the development of green materials. Green materials offers a unique characteristic and properties including abundant in nature, less toxic, economically affordable and versatility in term of physical and chemical properties. Green materials can be applied for a numerous field in science and technology applications including for energy, building, construction and infrastructures, materials science and engineering applications and pollution management and technology. For instance, green materials can be developed as a source for energy production. Green materials including biomass-based source can be developed as a source for biodiesel and bioethanol production. Biomass-based materials also can be transformed into advanced functionalized materials for advanced bio-applications such as the transformation of chitin into chitosan which further used for biomedicine, biomaterials and tissue engineering applications. Recently, cellulose-based material and lignocellulose-based materials as a source for the developing functional materials attracted the potential prospect for biomaterials, reinforcing materials and nanotechnology. Furthermore, the development of pigment materials has gaining interest by using the green materials as a source due to their unique properties. Eventually, Indonesia as a large country with a large biodiversity can enhance the development of green material to strengthen our nation competitiveness and develop the materials technology for the future.

Ceramic Technology Project semiannual progress report, April 1992--September 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.

1993-07-01

This project was developed to meet the ceramic technology requirements of the DOE Office of Transportation Systems` automotive technology programs. Significant progress in fabricating ceramic components for DOE, NASA, and DOE advanced heat engine programs show that operation of ceramic parts in high-temperature engines is feasible; however, addition research is needed in materials and processing, design, and data base and life prediction before industry will have a sufficient technology base for producing reliable cost-effective ceramic engine components commercially. A 5-yr project plan was developed, with focus on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments,more » and ceramic coatings for thermal barrier and wear applications in these engines.« less

Research on the Integration of IT Network Technology and TV Production and Broadcasting System

NASA Astrophysics Data System (ADS)

Zhang, Wenqing

2017-12-01

In recent years, based on the development of China’s economy and the progress of science and technology, China’s TV industry has made great progress and provided a new platform for residents to understand the social situation. In this situation, in order to protect the efficiency of the TV system and the steady improvement on quality, technical staff have strengthened the rational use of IT technology, and as a basis to promote the sound of television production system. Based on this, this paper focuses on the connotation of IT network technology, and discusses the integration of the design and TV production system, hoping to realize the sustainable development of China’s TV industry.

Time Series Analysis of Technology Trends based on the Internet Resources

NASA Astrophysics Data System (ADS)

Kobayashi, Shin-Ichi; Shirai, Yasuyuki; Hiyane, Kazuo; Kumeno, Fumihiro; Inujima, Hiroshi; Yamauchi, Noriyoshi

Information technology is increasingly important in recent years for the development of our society. IT has brought many changes to everything in our society with incredible speed. Hence, when we investigate R & D themes or plan business strategies in IT, we must understand overall situation around the target technology area besides technology itself. Especially it is crucial to understand overall situation as time series to know what will happen in the near future in the target area. For this purpose, we developed a method to generate Multiple-phased trend maps automatically based on the Internet content. Furthermore, we introduced quantitative indicators to analyze near future possible changes. According to the evaluation of this method we got successful and interesting results.

Scalable Entity-Based Modeling of Population-Based Systems, Final LDRD Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleary, A J; Smith, S G; Vassilevska, T K

2005-01-27

The goal of this project has been to develop tools, capabilities and expertise in the modeling of complex population-based systems via scalable entity-based modeling (EBM). Our initial focal application domain has been the dynamics of large populations exposed to disease-causing agents, a topic of interest to the Department of Homeland Security in the context of bioterrorism. In the academic community, discrete simulation technology based on individual entities has shown initial success, but the technology has not been scaled to the problem sizes or computational resources of LLNL. Our developmental emphasis has been on the extension of this technology to parallelmore » computers and maturation of the technology from an academic to a lab setting.« less

Advanced propulsion for LEO-Moon transport. 3: Transportation model. M.S. Thesis - California Univ.

NASA Technical Reports Server (NTRS)

Henley, Mark W.

1992-01-01

A simplified computational model of low Earth orbit-Moon transportation system has been developed to provide insight into the benefits of new transportation technologies. A reference transportation infrastructure, based upon near-term technology developments, is used as a departure point for assessing other, more advanced alternatives. Comparison of the benefits of technology application, measured in terms of a mass payback ratio, suggests that several of the advanced technology alternatives could substantially improve the efficiency of low Earth orbit-Moon transportation.

Low-weight, low-cost, low-cycle time, replicated glass mirrors

NASA Astrophysics Data System (ADS)

Egerman, Robert; De Smitt, Steven; Strafford, David

2010-07-01

ITT has patented and continues to develop processes to fabricate low-cost borosilicate mirrors that can be used for both ground and space-based optical telescopes. Borosilicate glass is a commodity and is the material of choice for today's flat-panel televisions and monitors. Supply and demand has kept its cost low compared to mirror substrate materials typically found in telescopes. The current technology development is on the path to having the ability to deliver imaging quality optics of up to 1m (scalable to 2m) in diameter in three weeks. For those applications that can accommodate the material properties of borosilicate glasses, this technology has the potential to revolutionize ground and space-based astronomy. ITT Corporation has demonstrated finishing a planar, 0.6m borosilicate, optic to <100 nm-rms. This paper will provide an historical overview of the development in this area with an emphasis on recent technology developments to fabricate a 0.6m parabolic mirror under NASA Earth Science Technology Office (ESTO) grant #NNX09AD61G.

Innovative Airbreathing Propulsion Concepts for High-speed Applications

NASA Technical Reports Server (NTRS)

Whitlow, Woodrow, Jr.

2002-01-01

The current cost to launch payloads to low earth orbit (LEO) is approximately loo00 U.S. dollars ($) per pound ($22000 per kilogram). This high cost limits our ability to pursue space science and hinders the development of new markets and a productive space enterprise. This enterprise includes NASA's space launch needs and those of industry, universities, the military, and other U.S. government agencies. NASA's Advanced Space Transportation Program (ASTP) proposes a vision of the future where space travel is as routine as in today's commercial air transportation systems. Dramatically lower launch costs will be required to make this vision a reality. In order to provide more affordable access to space, NASA has established new goals in its Aeronautics and Space Transportation plan. These goals target a reduction in the cost of launching payloads to LEO to $lo00 per pound ($2200 per kilogram) by 2007 and to $100' per pound by 2025 while increasing safety by orders of magnitude. Several programs within NASA are addressing innovative propulsion systems that offer potential for reducing launch costs. Various air-breathing propulsion systems currently are being investigated under these programs. The NASA Aerospace Propulsion and Power Base Research and Technology Program supports long-term fundamental research and is managed at GLenn Research Center. Currently funded areas relevant to space transportation include hybrid hyperspeed propulsion (HHP) and pulse detonation engine (PDE) research. The HHP Program currently is addressing rocket-based combined cycle and turbine-based combined cycle systems. The PDE research program has the goal of demonstrating the feasibility of PDE-based hybrid-cycle and combined cycle propulsion systems that meet NASA's aviation and access-to-space goals. The ASTP also is part of the Base Research and Technology Program and is managed at the Marshall Space Flight Center. As technologies developed under the Aerospace Propulsion and Power Base Research and Technology Program mature, they are incorporated into ASTP. One example of this is rocket-based combined cycle systems that are being considered as part of ASTP. The NASA Ultra Efficient Engine Technology (UEET) Program has the goal of developing propulsion system component technology that is relevant to a wide range of vehicle missions. In addition to subsonic and supersonic speed regimes, it includes the hypersonic speed regime. More specifically, component technologies for turbine-based combined cycle engines are being developed as part of UEET.

New technology for early detection of health threats

NASA Astrophysics Data System (ADS)

Southern, Šárka O.; Lilienthal, Gerald W.

2008-04-01

Governmental agencies charged with protecting the health of the population and agriculture have several main strategic objectives including the detection of harmful agents, the identification of vulnerable biological targets, the prediction of health outcomes and the development of countermeasures. New technologies are urgently needed in several critical areas of bio-chemical defense: economical and minimally invasive biosensors for field use in humans and other species important for agriculture and infrastructure, universal analytical platforms for broad-based, early warnings of threats and technologies guiding the development of countermeasures. A new technology called Stress Response Profiling (SRP) was recently developed by the Gaia Medical Institute. SRP provides a universal analytical platform for monitoring health status based on measurements of physiological stress. The platform is implemented through handheld devices that can be used for noninvasive detection of early-stage health problems. This paper summarizes SRP features, advantages and potential benefits for critical areas of homeland defense.

Concept designs for NASA's Solar Electric Propulsion Technology Demonstration Mission

NASA Technical Reports Server (NTRS)

Mcguire, Melissa L.; Hack, Kurt J.; Manzella, David H.; Herman, Daniel A.

2014-01-01

Multiple Solar Electric Propulsion Technology Demonstration Mission were developed to assess vehicle performance and estimated mission cost. Concepts ranged from a 10,000 kilogram spacecraft capable of delivering 4000 kilogram of payload to one of the Earth Moon Lagrange points in support of future human-crewed outposts to a 180 kilogram spacecraft capable of performing an asteroid rendezvous mission after launched to a geostationary transfer orbit as a secondary payload. Low-cost and maximum Delta-V capability variants of a spacecraft concept based on utilizing a secondary payload adapter as the primary bus structure were developed as were concepts designed to be co-manifested with another spacecraft on a single launch vehicle. Each of the Solar Electric Propulsion Technology Demonstration Mission concepts developed included an estimated spacecraft cost. These data suggest estimated spacecraft costs of $200 million - $300 million if 30 kilowatt-class solar arrays and the corresponding electric propulsion system currently under development are used as the basis for sizing the mission concept regardless of launch vehicle costs. The most affordable mission concept developed based on subscale variants of the advanced solar arrays and electric propulsion technology currently under development by the NASA Space Technology Mission Directorate has an estimated cost of $50M and could provide a Delta-V capability comparable to much larger spacecraft concepts.

The right of all nations to access science, new technologies and sustainable development.

PubMed

Majidi, Mohammad Reza; Dehshiri, Mohammad Reza

2009-01-01

This article explores the need for reflection on the right of developing countries to science and technology in addition to explaining the place of the scientific rights of nations in human rights as a whole. The discussion was conducted in relation to sustainable development. Through the examination of the current situation and the challenges to sustainable development, and taking into account the imbalance in the distribution of the benefits of science and new technologies, the authors advocate a comprehensive approach to promote cooperation and capacity-building in this area. They argue that linkages should be adopted between micro-levels and macro-levels of analysis by elevating rights and related issues from individuals to the national level in the field of the right to science and technology, and from the national to the international level in the field of sustainable development in order to institutionalise and ensure individual and national rights to science, technology and sustainable development. The authors also believe in a multidimensional perspective based on the balanced flourishing of the material and immaterial aspects of humankind in order to realise these rights in the context of dialogue and cultural diversity and to promote the culture of sustainable and dynamic peace based on justice in knowledge societies.

The U.S. Army in the 1970's: Developments in Training and Manpower Technologies. Professional Paper 77-01.

ERIC Educational Resources Information Center

Prophet, Wallace W.

An examination of Army instructional research and training programs in three specific areas may suggest implications for civilian instruction: (1) Performance-based instructional systems, (2) education and training for lower aptitude personnel, and (3) uses of instructional technology. The performance-based instructional system is based on…

Nintendo Wii: Opportunities to Put the Education Back into Physical Education

ERIC Educational Resources Information Center

Perlman, Dana; Forrest, Greg; Pearson, Phil

2012-01-01

Movement-based gaming technologies, such as the Nintendo Wii, are becoming more visible within the physical education. As research on movement-based technologies develops, an aspect that has gained interest is the potential educational value for the physical education student. The purpose of this study was to examine movement-based sport games and…

Advanced biomass science and technology for bio-based products: proceedings

Treesearch

Chung Hse; Zehui Jiang; Mon-Lin Kuo

2009-01-01

This book was developed from the proceedings of the Advanced Biomass Science and Technology for Bio-Based Products Symposium held in Beijing, China, May 23-25, 2007. The symposium was designed to provide a forum for researchers, producers, and consumers of biomass and bio-based products; to exchange information and ideas; and to stimulate new research and...

A Review of Technology-Based Interventions to Teach Academic Skills to Students with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Knight, Victoria; McKissick, Bethany R.; Saunders, Alicia

2013-01-01

A comprehensive review of the literature was conducted for articles published between 1993 and 2012 to determine the degree to which technology-based interventions can be considered an evidence-based practice to teach academic skills to individuals with Autism Spectrum Disorder (ASD). Criteria developed by Horner et al. ("Except Child"…

Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

NASA Astrophysics Data System (ADS)

Wang, Fan

2018-03-01

One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

"First generation" automated DNA sequencing technology.

PubMed

Slatko, Barton E; Kieleczawa, Jan; Ju, Jingyue; Gardner, Andrew F; Hendrickson, Cynthia L; Ausubel, Frederick M

2011-10-01

Beginning in the 1980s, automation of DNA sequencing has greatly increased throughput, reduced costs, and enabled large projects to be completed more easily. The development of automation technology paralleled the development of other aspects of DNA sequencing: better enzymes and chemistry, separation and imaging technology, sequencing protocols, robotics, and computational advancements (including base-calling algorithms with quality scores, database developments, and sequence analysis programs). Despite the emergence of high-throughput sequencing platforms, automated Sanger sequencing technology remains useful for many applications. This unit provides background and a description of the "First-Generation" automated DNA sequencing technology. It also includes protocols for using the current Applied Biosystems (ABI) automated DNA sequencing machines. © 2011 by John Wiley & Sons, Inc.

Advances in Robotic Servicing Technology Development

NASA Technical Reports Server (NTRS)

Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

2015-01-01

NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and near Earth asteroid boulder retrieval; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

Advances in Robotic Servicing Technology Development

NASA Technical Reports Server (NTRS)

Gefke, Gardell G.; Janas, Alex; Pellegrino, Joseph; Sammons, Matthew; Reed, Benjamin

2015-01-01

NASA's Satellite Servicing Capabilities Office (SSCO) has matured robotic and automation technologies applicable to in-space robotic servicing and robotic exploration over the last six years. This paper presents the progress of technology development activities at the Goddard Space Flight Center Servicing Technology Center and on the ISS, with an emphasis on those occurring in the past year. Highlighted advancements are design reference mission analysis for servicing in low Earth orbit (LEO) and asteroid redirection; delivery of the engineering development unit of the NASA Servicing Arm; an update on International Space Station Robotic Refueling Mission; and status of a comprehensive ground-based space robot technology demonstration expanding in-space robotic servicing capabilities beginning fall 2015.

A Process for Technology Prioritization in a Competitive Environment

NASA Technical Reports Server (NTRS)

Stephens, Karen; Herman, Melody; Griffin, Brand

2006-01-01

This slide presentation reviews NASA's process for prioritizing technology requirements where there is a competitive environment. The In-Space Propulsion Technology (ISPT) project is used to exemplify the process. The ISPT project focuses on the mid level Technology Readiness Level (TRL) for development. These are TRL's 4 through 6, (i.e. Technology Development and Technology Demonstration. The objective of the planning activity is to identify the current most likely date each technology is needed and create ISPT technology development schedules based on these dates. There is a minimum of 4 years between flight and pacing mission. The ISPT Project needed to identify the "pacing mission" for each technology in order to provide funding for each area. Graphic representations show the development of the process. A matrix shows which missions are currently receiving pull from the both the Solar System Exploration and the Sun-Solar System Connection Roadmaps. The timeframes of the pacing missions technologies are shown for various types of propulsion. A pacing mission that was in the near future serves to increase the priority for funding. Adaptations were made when budget reductions precluded the total implementation of the plan.

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Steckleim, Jonette M.; Alexander, Leslie; Rahman, Shamin A.; Rosenthal, Matthew; Wiley, Dianne S.; Davison, Stephan C.; Korsmeyer, David J.;

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Tribal recommendations for designing culturally appropriate technology-based sexual health interventions targeting Native youth in the Pacific Northwest.

PubMed

Craig Rushing, Stephanie; Stephens, David

2012-01-01

Media technologies, including the Internet, cell phones, and video games, offer new avenues to reach Native youth on sensitive health topics. Project Red Talon, a sexually transmitted disease (STD)/HIV prevention project that serves the 43 federally recognized tribes in Oregon, Washington, and Idaho, used community-based participatory research methods in partnership with the Northwest tribes to review existing technology-based interventions and generate recommendations for designing interventions that reflect the culture, needs, and organizational capacities of participating tribes and Native youth. These findings are now being used to guide the development of technology-based health interventions targeting American Indian/Alaska Native teens and young adults.

Soft computing prediction of economic growth based in science and technology factors

NASA Astrophysics Data System (ADS)

Marković, Dušan; Petković, Dalibor; Nikolić, Vlastimir; Milovančević, Miloš; Petković, Biljana

2017-01-01

The purpose of this research is to develop and apply the Extreme Learning Machine (ELM) to forecast the gross domestic product (GDP) growth rate. In this study the GDP growth was analyzed based on ten science and technology factors. These factors were: research and development (R&D) expenditure in GDP, scientific and technical journal articles, patent applications for nonresidents, patent applications for residents, trademark applications for nonresidents, trademark applications for residents, total trademark applications, researchers in R&D, technicians in R&D and high-technology exports. The ELM results were compared with genetic programming (GP), artificial neural network (ANN) and fuzzy logic results. Based upon simulation results, it is demonstrated that ELM has better forecasting capability for the GDP growth rate.

Develop Improved Materials to Support the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dr. Michael C. Martin

The Edison Materials Technology Center (EMTEC) solicited and funded hydrogen infrastructure related projects that have a near term potential for commercialization. The subject technology of each project is related to the US Department of Energy hydrogen economy goals as outlined in the multi-year plan titled, 'Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan.' Preference was given to cross cutting materials development projects that might lead to the establishment of manufacturing capability and job creation. The Edison Materials Technology Center (EMTEC) used the US Department of Energy hydrogen economy goals to find and fund projects withmore » near term commercialization potential. An RFP process aligned with this plan required performance based objectives with go/no-go technology based milestones. Protocols established for this program consisted of a RFP solicitation process, white papers and proposals with peer technology and commercialization review (including DoE), EMTEC project negotiation and definition and DoE cost share approval. Our RFP approach specified proposals/projects for hydrogen production, hydrogen storage or hydrogen infrastructure processing which may include sensor, separator, compression, maintenance, or delivery technologies. EMTEC was especially alert for projects in the appropriate subject area that have cross cutting materials technology with near term manufacturing and commercialization opportunities.« less

Operational Lessons Learned During Bioreactor Demonstrations for Acid Rock Drainage Treatment

EPA Science Inventory

The U.S. Environmental Protection Agency’s Mine Waste Technology Program (MWTP) has emphasized the development of biologically-based treatment technologies for acid rock drainage (ARD). Progressively evolving technology demonstrations have resulted in significant advances in sul...

VERIFICATION TESTING OF WET-WEATHER FLOW TECHNOLOGIES

EPA Science Inventory

As part of the USEPA's ETV Program, the Wet-Weather Flow (WWF) Technologies Pilot Program verifies the performance of commercial-ready technologies by generating quality-assured data using test protocols developed with broad-based stakeholder input. The availability of a credible...

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... determining whether to continue, modify, or terminate an information technology program or project. (iii... technology to improve productivity in the Department. (P) Plan, develop, install, and operate computer-based systems for message exchange, scheduling, computer conferencing, televideo technologies, and other...

Design and Development of a Rapid Research, Design, and Development Platform for In-Situ Testing of Tools and Concepts for Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

Underwood, Matthew C.

2017-01-01

To provide justification for equipping a fleet of aircraft with avionics capable of supporting trajectory-based operations, significant flight testing must be accomplished. However, equipping aircraft with these avionics and enabling technologies to communicate the clearances required for trajectory-based operations is cost-challenging using conventional avionics approaches. This paper describes an approach to minimize the costs and risks of flight testing these technologies in-situ, discusses the test-bed platform developed, and highlights results from a proof-of-concept flight test campaign that demonstrates the feasibility and efficiency of this approach.

Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W.; Laird, Daniel

Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problemmore » solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).« less

Application of space technologies for the purpose of education at the Belarusian state university

NASA Astrophysics Data System (ADS)

Liashkevich, Siarhey

Application of space technologies for the purpose of education at the Aerospace Educational Center of Belarusian state university is discussed. The aim of the work is to prepare launch of small satellite. Students are expected to participate in the design of control station, systems of communication, earth observation, navigation, and positioning. Benefit of such project-based learning from economical perspective is discussed. At present our training system at the base of EyasSat classroom satellite is used for management of satellite orientation and stabilization system. Principles of video processing, communication technologies and informational security for small spacecraft are developed at the base of Wi9M-2443 developer kit. More recent equipment allows obtaining the skills in digital signal processing at the base of FPGA. Development of ground station includes setup of 2.6 meter diameter dish for L-band, and spiral rotational antennas for UHF and VHF bands. Receiver equipment from National Instruments is used for digital signal processing and signal management.

Restructuring Training and Education through Technology. Proceedings of the Annual Conference of the Association for the Development of Computer-Based Instructional Systems (32nd, San Diego, California, October 29-November 1, 1990).

ERIC Educational Resources Information Center

Dalton, David W., Ed.

The theme of the 32nd International Association for the Development of Computer-Based Instructional Systems (ADCIS) Conference was "Restructuring Training and Education through Technology." This collection of conference presentations contains 52 papers and 183 abstracts for which there are no formal papers. The papers and abstracts are presented…

Burst Mode ASIC-Based Modem

NASA Technical Reports Server (NTRS)

1997-01-01

The NASA Lewis Research Center is sponsoring the Advanced Communication Technology Insertion (ACTION) for Commercial Space Applications program. The goal of the program is to expedite the development of new technology with a clear path towards productization and enhancing the competitiveness of U.S. manufacturers. The industry has made significant investment in developing ASIC-based modem technology for continuous-mode applications and has made investigations into East, reliable acquisition of burst-mode digital communication signals. With rapid advances in analog and digital communications ICs, it is expected that more functions will be integrated onto these parts in the near future. In addition custom ASIC's can also be developed to address the areas not covered by the other IC's. Using the commercial chips and custom ASIC's, lower-cost, compact, reliable, and high-performance modems can be built for demanding satellite communication application. This report outlines a frequency-hop burst modem design based on commercially available chips.

Biorefineries for the production of top building block chemicals and their derivatives.

PubMed

Choi, Sol; Song, Chan Woo; Shin, Jae Ho; Lee, Sang Yup

2015-03-01

Due to the growing concerns on the climate change and sustainability on petrochemical resources, DOE selected and announced the bio-based top 12 building blocks and discussed the needs for developing biorefinery technologies to replace the current petroleum based industry in 2004. Over the last 10 years after its announcement, many studies have been performed for the development of efficient technologies for the bio-based production of these chemicals and derivatives. Now, ten chemicals among these top 12 chemicals, excluding the l-aspartic acid and 3-hydroxybutyrolactone, have already been commercialized or are close to commercialization. In this paper, we review the current status of biorefinery development for the production of these platform chemicals and their derivatives. In addition, current technological advances on industrial strain development for the production of platform chemicals using micro-organisms will be covered in detail with case studies on succinic acid and 3-hydroxypropionic acid as examples. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

The Development of Educational Technology Policies (1996-2012): Lessons from China and the USA

ERIC Educational Resources Information Center

Alamin, Alnuaman A.; Shaoqing, Guo; Le, Zhang

2015-01-01

This study reviews the development of educational technology macro policies in China and USA based on the historical juxtaposition approach. It shows that, despite the fact that two countries have major differences, with China officially being a socialist country, while the USA is a capitalist country; the development of educational technology…

The Application of Kohlberg's Moral Development Model to College Students' Technology Ethics Decisions

ERIC Educational Resources Information Center

Kiser, Angelina I. T.; Morrison, Eileen E.; Craven, Annette

2009-01-01

This study examined undergraduate university students' (n=121) responses to six ethical dilemmas within the realm of information technology (IT). Using a framework based on Kohlberg's stages of moral development, the study evaluated the level of moral development as demonstrated in these responses. An apriori coding system was used to analyze the…