Continuation of Crosscutting Technology Development at Cast

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoon, Roe-Hoan

2012-03-31

This Final Technical Report describes progress made on the sub-projects awarded in the Cooperative Agreement DE-FC26-05NT42457: Continuation of Crosscutting Technology Development at Center for Advanced Separation Technologies (CAST). The final reports for each sub-project are attached in the appendix. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: a) Solid-solid separation b) Solid-liquid separation c) Chemical/Biological Extraction d) Modeling and Control, and e) Environmental Control.

An Overview of SBIR Phase 2 Airbreathing Propulsion Technologies

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.; Bitler, Dean W.

2014-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing areas in Airbreathing Propulsion which is one of six core competencies at NASA Glenn Research Center. There are twenty technologies featured with emphasis on a wide spectrum of applications such as with a Turbo-Brayton cryocooler for aircraft superconducting systems, braided composite rotorcraft structures, engine air brake, combustion control valve, flexible composite driveshaft, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

Review of NASA's(TradeMark) Exploration Technology Development Program

NASA Technical Reports Server (NTRS)

2008-01-01

To meet the objectives of the Vision for Space Exploration (VSE), NASA must develop a wide array of enabling technologies. For this purpose, NASA established the Exploration Technology Development Program (ETDP). Currently, ETDP has 22 projects underway. In the report accompanying the House-passed version of the FY2007 appropriations bill, the agency was directed to request from the NRC an independent assessment of the ETDP. This interim report provides an assessment of each of the 22 projects including a quality rating, an analysis of how effectively the research is being carried out, and the degree to which the research is aligned with the VSE. To the extent possible, the identification and discussion of various cross-cutting issues are also presented. Those issues will be explored and discussed in more detail in the final report.

An Overview of SBIR Phase 2 In-Space Propulsion and Cryogenic Fluids Management

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2015-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing Areas in In-Space Propulsion and Cryogenic Fluids Management which is one of six core competencies at NASA Glenn Research Center. There are nineteen technologies featured with emphasis on a wide spectrum of applications such as high-performance Hall thruster support system, thruster discharge power converter, high-performance combustion chamber, ion thruster design tool, green liquid monopropellant thruster, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

An Overview of SBIR Phase 2 Materials Structures for Extreme Environments

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2015-01-01

Technological innovation is the overall focus of NASA's Small Business Innovation Research (SBIR) program. The program invests in the development of innovative concepts and technologies to help NASA's mission directorates address critical research and development needs for agency projects. This report highlights innovative SBIR Phase II projects from 2007-2012 specifically addressing Areas in Materials and Structures for Extreme Environments which is one of six core competencies at NASA Glenn Research Center. There are twenty three technologies featured with emphasis on a wide spectrum of applications such as fine-filament superconductor wire, composite oxide cathode materials, nano-composites, high radiation solar cell, wrapped multilayer insulation, thin aerogel, and much more. Each article in this booklet describes an innovation, technical objective, and highlights NASA commercial and industrial applications. This report serves as an opportunity for NASA personnel including engineers, researchers, and program managers to learn of NASA SBIR's capabilities that might be crosscutting into this technology area. As the result, it would cause collaborations and partnerships between the small companies and NASA Programs and Projects resulting in benefit to both SBIR companies and NASA.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

DOE-EERE's Bioenergy Technologies Office (BETO) works to accelerate the development of a sustainable, cost-competitive, advanced biofuel industry that can strengthen U.S. energy security, environmental quality, and economic vitality, through research, development, and demonstration projects in partnership with industry, academia, and national laboratory partners. BETO’s Advanced Algal Systems Program (also called the Algae Program) has a long-term applied research and development (R&D) strategy to increase the yields and lower the costs of algal biofuels. The team works with partners to develop new technologies, to integrate technologies at commercially relevant scales, and to conduct crosscutting analyses to better understand the potential andmore » challenges of the algal biofuels industry. Research has indicated that this industry is capable of producing billions of gallons of renewable diesel, gasoline, and jet fuels annually. R&D activities are integrated with BETO’s longstanding effort to accelerate the commercialization of lignocellulosic biofuels.« less

Aspects, Wrappers and Events

NASA Technical Reports Server (NTRS)

Filman, Robert E.

2003-01-01

This viewgraph presentation provides information on Object Infrastructure Framework (OIF), an Aspect-Oriented Programming (AOP) system. The presentation begins with an introduction to the difficulties and requirements of distributed computing, including functional and non-functional requirements (ilities). The architecture of Distributed Object Technology includes stubs, proxies for implementation objects, and skeletons, proxies for client applications. The key OIF ideas (injecting behavior, annotated communications, thread contexts, and pragma) are discussed. OIF is an AOP mechanism; AOP is centered on: 1) Separate expression of crosscutting concerns; 2) Mechanisms to weave the separate expressions into a unified system. AOP is software engineering technology for separately expressing systematic properties while nevertheless producing running systems that embody these properties.

High temperature, harsh environment sensors for advanced power generation systems

NASA Astrophysics Data System (ADS)

Ohodnicki, P. R.; Credle, S.; Buric, M.; Lewis, R.; Seachman, S.

2015-05-01

One mission of the Crosscutting Technology Research program at the National Energy Technology Laboratory is to develop a suite of sensors and controls technologies that will ultimately increase efficiencies of existing fossil-fuel fired power plants and enable a new generation of more efficient and lower emission power generation technologies. The program seeks to accomplish this mission through soliciting, managing, and monitoring a broad range of projects both internal and external to the laboratory which span sensor material and device development, energy harvesting and wireless telemetry methodologies, and advanced controls algorithms and approaches. A particular emphasis is placed upon harsh environment sensing for compatibility with high temperature, erosive, corrosive, and highly reducing or oxidizing environments associated with large-scale centralized power generation. An overview of the full sensors and controls portfolio is presented and a selected set of current and recent research successes and on-going projects are highlighted. A more detailed emphasis will be placed on an overview of the current research thrusts and successes of the in-house sensor material and device research efforts that have been established to support the program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwab, Amy

The Bioenergy Technologies Office is one of the 10 technology development offices within the Office of Energy Efficiency and Renewable Energy at the U.S. Department of Energy. This Multi-Year Program Plan (MYPP) sets forth the goals and structure of the Bioenergy Technologies Office (the Office). It identifies the research, development, and demonstration (RD&D), and market transformation and crosscutting activities the Office will focus on over the next five years and outlines why these activities are important to meeting the energy and sustainability challenges facing the nation. This MYPP is intended for use as an operational guide to help the Officemore » manage and coordinate its activities, as well as a resource to help communicate its mission and goals to stakeholders and the public.« less

Chapter 10: Peak Demand and Time-Differentiated Energy Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Stern, Frank; Spencer, Justin

Savings from electric energy efficiency measures and programs are often expressed in terms of annual energy and presented as kilowatt-hours per year (kWh/year). However, for a full assessment of the value of these savings, it is usually necessary to consider the measure or program's impact on peak demand as well as time-differentiated energy savings. This cross-cutting protocol describes methods for estimating the peak demand and time-differentiated energy impacts of measures implemented through energy efficiency programs.

Program director`s overview report for the Office of Health & Environmental Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilbert, D.

1994-02-01

LBL performs basic and applied research and develops technologies in support of the Office of Health and Environmental Research`s mission to explore and mitigate the long-term health and environmental consequences of energy use and to advance solutions to major medical challenges. The ability of the Laboratory to engage in this mission depends upon the strength of its core competencies. In addition, there are several key capabilities that are cross-cutting, or underlie, many of the core competencies. Attention is focused on the following: Facilities and resources; research management practices; research in progress; program accomplishments and research highlights; program orientation; work formore » non-OHER organizations DOE; critical issues; and resource orientation.« less

Autonomous RPOD Technology Challenges for the Coming Decade

NASA Technical Reports Server (NTRS)

Naasz, Bo J.; Moreau, Michael C.

2012-01-01

Rendezvous Proximity Operations and Docking (RPOD) technologies are important to a wide range of future space endeavors. This paper will review some of the recent and ongoing activities related to autonomous RPOD capabilities and summarize the current state of the art. Gaps are identified where future investments are necessary to successfully execute some of the missions likely to be conducted within the next ten years. A proposed RPOD technology roadmap that meets the broad needs of NASA's future missions will be outlined, and ongoing activities at OSFC in support of a future satellite servicing mission are presented. The case presented shows that an evolutionary, stair-step technology development program. including a robust campaign of coordinated ground tests and space-based system-level technology demonstration missions, will ultimately yield a multi-use main-stream autonomous RPOD capability suite with cross-cutting benefits across a wide range of future applications.

Environmental restoration and waste management: Robotics technology development program: Robotics 5-year program plan. [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This plan covers robotics Research, Development, Demonstration, Testing, activities in the Program for the next five years. These activities range from bench-scale R D to fullscale hot demonstrations at DOE sites. This plan outlines applications of existing technology to near-term needs, the development and application of enhanced technology for longer-term needs, and an initiation of advanced technology development to meet those needs beyond the five-year plan. The objective of the Robotic Technology Development (RTDP) is to develop and apply robotics technologies that will enable Environmental Restoration and Waste Management operations at DOE sites to be safer, faster and cheaper. Fivemore » priority DOE sites were visited in March 1990 to identify needs for robotics technology in ER WM operations. This 5-Year Program Plan for the RTDP detailed annual plans for robotics technology development based on identified needs. This 5-Year Program Plan discusses the overall approach to be adopted by the RTDP to aggressively develop robotics technology and contains discussions of the Program Management Plan, Site Visit and Needs Summary, Approach to Needs-Directed Technical Development, Application-Specific Technical Development, and Cross-Cutting and Advanced Technology. Integrating application-specific ER WM needs, the current state of robotics technology, and the potential benefits (in terms of faster, safer, and cheaper) of new technology, the Plan develops application-specific road maps for robotics RDDT E for the period FY 1991 through FY 1995. In addition, the Plan identifies areas where longer-term research in robotics will have a high payoff in the 5- to 20-year time frame. 12 figs.« less

Airframe Research and Technology for Hypersonic Airbreathing Vehicles

NASA Technical Reports Server (NTRS)

Glass, David E.; Merski, N. Ronald; Glass, Christopher E.

2002-01-01

The Hypersonics Investment Area (HIA) within NASA's Advanced Space Transportation Program (ASTP) has the responsibility to develop hypersonic airbreathing vehicles for access to space. The Airframe Research and Technology (AR and T) Project, as one of six projects in the HIA, will push the state-of-the-art in airframe and vehicle systems for low-cost, reliable, and safe space transportation. The individual technologies within the project are focused on advanced, breakthrough technologies in airframe and vehicle systems and cross-cutting activities that are the basis for improvements in these disciplines. Both low and medium technology readiness level (TRL) activities are being pursued. The key technical areas that will be addressed by the project include analysis and design tools, integrated vehicle health management (IVHM), composite (polymer, metal, and ceramic matrix) materials development, thermal/structural wall concepts, thermal protection systems, seals, leading edges, aerothermodynamics, and airframe/propulsion flowpath technology. Each of the technical areas or sub-projects within the Airframe R and T Project is described in this paper.

Green Propellant Infusion Mission Program Development and Technology Maturation

NASA Technical Reports Server (NTRS)

McLean, Christopher H.; Deininger, William D.; Joniatis, John; Aggarwal, Pravin K.; Spores, Ronald A.; Deans, Matthew; Yim, John T.; Bury, Kristen; Martinez, Jonathan; Cardiff, Eric H.;

Crosscutting Technology Development at the Center for Advanced Separation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher Hull

2009-10-31

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginiamore » Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.« less

Review of U.S. EPA Office of Research and Development's Research Programs

EPA Pesticide Factsheets

A review report of the Office of Research and Development’s (ORD) Strategic Research Action Plans (StRAPs) and the cross-cutting program Roadmaps for Environmental Justice and Global Climate Change.

Urban Elementary STEM Initiative

ERIC Educational Resources Information Center

Parker, Carolyn; Abel, Yolanda; Denisova, Ekaterina

2015-01-01

The new standards for K-12 science education suggest that student learning should be more integrated and should focus on crosscutting concepts and core ideas from the areas of physical science, life science, Earth/space science, and engineering/technology. This paper describes large-scale, urban elementary-focused science, technology, engineering,…

The Development of STEAM Educational Policy to Promote Student Creativity and Social Empowerment

ERIC Educational Resources Information Center

Allina, Babette

2018-01-01

The Science, Technology, Engineering, Arts, and Mathematics (STEAM) movement argues that broad-based education that promotes creativity recognizes student learning diversity, increases student engagement and can potentially enhance Science, Technology, Engineering, and Mathematics (STEM) learning by embracing cross-cutting translational skills…

Games for learning: vast wasteland or a digital promise?

PubMed

Levine, Michael H; Vaala, Sarah E

2013-01-01

Research about emerging best practices in the learning sciences points to the potential of deploying digital games as one possible solution to the twin challenges of weak student engagement and the need for more robust achievement in literacy, science, technology, and math. This chapter reviews key cross-cutting themes in this special volume, drawing perspective from the context of the current United States program and policy reform. The authors conclude that digital games have some unique potential to address pressing educational challenges, but that new mechanisms for advancing purposeful research and development must be adopted by both policymakers and industry leaders. Copyright © 2013 Wiley Periodicals, Inc., A Wiley Company.

Bioinformatics for Exploration

NASA Technical Reports Server (NTRS)

Johnson, Kathy A.

2006-01-01

For the purpose of this paper, bioinformatics is defined as the application of computer technology to the management of biological information. It can be thought of as the science of developing computer databases and algorithms to facilitate and expedite biological research. This is a crosscutting capability that supports nearly all human health areas ranging from computational modeling, to pharmacodynamics research projects, to decision support systems within autonomous medical care. Bioinformatics serves to increase the efficiency and effectiveness of the life sciences research program. It provides data, information, and knowledge capture which further supports management of the bioastronautics research roadmap - identifying gaps that still remain and enabling the determination of which risks have been addressed.

Review of U.S. EPA Office of Research and Development's Research Programs - 2017

EPA Pesticide Factsheets

A review report of the Office of Research and Development’s (ORD) Strategic Research Action Plans (StRAPs) and the cross-cutting program Roadmaps for Environmental Justice and Global Climate Change.

Tailoring Software Inspections for Aspect-Oriented Programming

ERIC Educational Resources Information Center

Watkins, Charlette Ward

2009-01-01

Aspect-Oriented Software Development (AOSD) is a new approach that addresses limitations inherent in conventional programming, especially the principle of separation of concerns by emphasizing the encapsulation and modularization of crosscutting concerns through a new abstraction, the "aspect." Aspect-oriented programming is an emerging AOSD…

Crosscut report: Exascale Requirements Reviews, March 9–10, 2017 – Tysons Corner, Virginia. An Office of Science review sponsored by: Advanced Scientific Computing Research, Basic Energy Sciences, Biological and Environmental Research, Fusion Energy Sciences, High Energy Physics, Nuclear Physics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gerber, Richard; Hack, James; Riley, Katherine

The mission of the U.S. Department of Energy Office of Science (DOE SC) is the delivery of scientific discoveries and major scientific tools to transform our understanding of nature and to advance the energy, economic, and national security missions of the United States. To achieve these goals in today’s world requires investments in not only the traditional scientific endeavors of theory and experiment, but also in computational science and the facilities that support large-scale simulation and data analysis. The Advanced Scientific Computing Research (ASCR) program addresses these challenges in the Office of Science. ASCR’s mission is to discover, develop, andmore » deploy computational and networking capabilities to analyze, model, simulate, and predict complex phenomena important to DOE. ASCR supports research in computational science, three high-performance computing (HPC) facilities — the National Energy Research Scientific Computing Center (NERSC) at Lawrence Berkeley National Laboratory and Leadership Computing Facilities at Argonne (ALCF) and Oak Ridge (OLCF) National Laboratories — and the Energy Sciences Network (ESnet) at Berkeley Lab. ASCR is guided by science needs as it develops research programs, computers, and networks at the leading edge of technologies. As we approach the era of exascale computing, technology changes are creating challenges for science programs in SC for those who need to use high performance computing and data systems effectively. Numerous significant modifications to today’s tools and techniques will be needed to realize the full potential of emerging computing systems and other novel computing architectures. To assess these needs and challenges, ASCR held a series of Exascale Requirements Reviews in 2015–2017, one with each of the six SC program offices,1 and a subsequent Crosscut Review that sought to integrate the findings from each. Participants at the reviews were drawn from the communities of leading domain scientists, experts in computer science and applied mathematics, ASCR facility staff, and DOE program managers in ASCR and the respective program offices. The purpose of these reviews was to identify mission-critical scientific problems within the DOE Office of Science (including experimental facilities) and determine the requirements for the exascale ecosystem that would be needed to address those challenges. The exascale ecosystem includes exascale computing systems, high-end data capabilities, efficient software at scale, libraries, tools, and other capabilities. This effort will contribute to the development of a strategic roadmap for ASCR compute and data facility investments and will help the ASCR Facility Division establish partnerships with Office of Science stakeholders. It will also inform the Office of Science research needs and agenda. The results of the six reviews have been published in reports available on the web at http://exascaleage.org/. This report presents a summary of the individual reports and of common and crosscutting findings, and it identifies opportunities for productive collaborations among the DOE SC program offices.« less

"Here, There, and Everywhere": Connecting Science Across The Universe

NASA Astrophysics Data System (ADS)

Watzke, Megan; Slane, P. O.; Arcand, K. K.; Lestition, K.; Edmonds, P.; Tucker, W. H.

2013-04-01

"Here, There, and Everywhere" (HTE) is a program -- conceived and developed by the Chandra Education and Public Outreach group -- that consists of a series of exhibitions, posters, and supporting hands-on activities that utilize analogies in the teaching of science, engineering, and technology to provide multi-generational and family-friendly content in English and Spanish to small community centers, libraries, under-resourced small science centers. The purpose of the program is to connect crosscutting science content (in Earth, atmospheric and planetary sciences and astrophysics) with everyday phenomena, helping to demonstrate the universality of physical laws and the connection between our everyday world and the universe as a whole to members of the public who may not identify strongly with science. The program utilizes multimodal content delivery (physical exhibits and handouts, interpretive stations, facilitated activities for educators as well as online materials) hosted by under-served locations as identified by previous partnerships as well as through advertisement of opportunities.

Materials and Structures Research for Gas Turbine Applications Within the NASA Subsonic Fixed Wing Project

NASA Technical Reports Server (NTRS)

Hurst, Janet

2011-01-01

A brief overview is presented of the current materials and structures research geared toward propulsion applications for NASA s Subsonic Fixed Wing Project one of four projects within the Fundamental Aeronautics Program of the NASA Aeronautics Research Mission Directorate. The Subsonic Fixed Wing (SFW) Project has selected challenging goals which anticipate an increasing emphasis on aviation s impact upon the global issue of environmental responsibility. These goals are greatly reduced noise, reduced emissions and reduced fuel consumption and address 25 to 30 years of technology development. Successful implementation of these demanding goals will require development of new materials and structural approaches within gas turbine propulsion technology. The Materials and Structures discipline, within the SFW project, comprise cross-cutting technologies ranging from basic investigations to component validation in laboratory environments. Material advances are teamed with innovative designs in a multidisciplinary approach with the resulting technology advances directed to promote the goals of reduced noise and emissions along with improved performance.

EPA Response to Review of Office of Research and Development's Research Programs

EPA Pesticide Factsheets

EPA's response to the review report of the Office of Research and Development’s (ORD) Strategic Research Action Plans (StRAPs) and the cross-cutting program Roadmaps for Environmental Justice and Global Climate Change.

Hanford science and technology needs statements document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piper, L.L.

This document is a compilation of the Hanford science and technology needs statements for FY 1998. The needs were developed by the Hanford Site Technology Coordination Group (STCG) with full participation and endorsement of site user organizations, stakeholders, and regulators. The purpose of this document is to: (a) provide a comprehensive listing of Hanford science and technology needs, and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community. The Hanford STCG reviews and updates the needs annually. Once completed, the needs are communicated to DOE for use in the development and prioritizationmore » of their science and technology programs, including the Focus Areas, Cross-Cutting Programs, and the Environmental Management Science Program. The needs are also transmitted to DOE through the Accelerating Cleanup: 2006 Plan. The public may access the need statements on the Internet on: the Hanford Home Page (www.hanford.gov), the Pacific Rim Enterprise Center`s web site (www2.pacific-rim.org/pacific rim), or the STCG web site at DOE headquarters (em-52.em.doegov/ifd/stcg/stcg.htm). This page includes links to science and technology needs for many DOE sites. Private industry is encouraged to review the need statements and contact the Hanford STCG if they can provide technologies that meet these needs. On-site points of contact are included at the ends of each need statement. The Pacific Rim Enterprise Center (206-224-9934) can also provide assistance to businesses interested in marketing technologies to the DOE.« less

Geospatial Technologies as a Vehicle for Enhancing Graduate Education and Promoting the Value of Geography

ERIC Educational Resources Information Center

Oberle, Alex P.; Joseph, Sue A.; May, David W.

2010-01-01

Geospatial technologies (GSTs), such as geographic information systems, global positioning systems and remote sensing, present an avenue for expanding the already strong interdisciplinary nature of geography. This paper discusses how GSTs served as a common thread for a crosscutting faculty institute that was established to enhance graduate…

CORY: A Computer Program for Determining Dimension Stock Yields

Treesearch

Charles C Brunner; Marshall S. White; Fred M. Lamb; James G. Schroeder

1989-01-01

CORY is a computer program that calculates random-width, fixed-length cutting yields and best sawing sequences for either rip- or crosscut-first operations. It differs from other yield calculating programs by evaluating competing cuttings through conflict resolution models. Comparisons with Program YIELD resulted in a 9 percent greater cutting volume and a 98 percent...

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Evaluating Cross-Cutting Approaches to Chronic Disease Prevention and Management: Developing a Comprehensive Evaluation

PubMed Central

Jernigan, Jan; Barnes, Seraphine Pitt; Shea, Pat; Davis, Rachel; Rutledge, Stephanie

2017-01-01

We provide an overview of the comprehensive evaluation of State Public Health Actions to Prevent and Control Diabetes, Heart Disease, Obesity and Associated Risk Factors and Promote School Health (State Public Health Actions). State Public Health Actions is a program funded by the Centers for Disease Control and Prevention to support the statewide implementation of cross-cutting approaches to promote health and prevent and control chronic diseases. The evaluation addresses the relevance, quality, and impact of the program by using 4 components: a national evaluation, performance measures, state evaluations, and evaluation technical assistance to states. Challenges of the evaluation included assessing the extent to which the program contributed to changes in the outcomes of interest and the variability in the states’ capacity to conduct evaluations and track performance measures. Given the investment in implementing collaborative approaches at both the state and national level, achieving meaningful findings from the evaluation is critical. PMID:29215974

Intelligent transportation systems at international borders : a cross-cutting study : facilitating trade and enhancing transportation safety

DOT National Transportation Integrated Search

2001-04-01

The International Border Clearance (IBC) program was initiated under the provisions of the Intermodal Surface Transportation Efficiency Act (ISTEA) of 1991. The program was originally conceived as a means to test the feasibility of utilizing Intellig...

Environmental restoration and waste management: Robotics technology development program: Robotics 5-year program plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In FY 1990 Robotics Technology Development Program (RTDP) planning teams visited five DOE sites. These sites were selected by the Office of Technology Development to provide a needs basis for developing a 5-Year Plan. Visits to five DOE sites provided identification of needs for robotics technology development to support Environmental Restoration and Waste Management (ER WM) projects at those sites. Additional site visits will be conducted in the future to expand the planning basis. This volume summarizes both the results of the site visits and the needs and requirements of the priority ER WM activities at the sites, including potentialmore » needs for robotics and remote systems technology. It also discusses hazards associated with the site activities and any problems or technical uncertainties associated with dealing with the hazards in the performance of the ER WM work. Robotic or remote systems currently under development for remediation projects or waste operations are also discussed. The information in this document is organized principally by site, activity, and priority. Section 2.0, Site Needs, is based on information from the site visit reports and provides a summary which focuses on the site needs and requirements for each priority activity. Section 2.0 also records evaluations and discussions by the RTDP team following the site visit. Section 3.0, Commonality Assessment, documents similar site needs where common, or cross-cutting, robotics technology might be applied to several activities. Section 4.0 contains a summary of the site needs and requirements in tabular form. 1 tab.« less

NASA Program Office Technology Investments to Enable Future Missions

NASA Astrophysics Data System (ADS)

Thronson, Harley; Pham, Thai; Ganel, Opher

2018-01-01

The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope (née, Far-IR Surveyor), Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and Lynx (née, X-ray Surveyor). The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned Laser Interferometer Space Antenna (LISA) gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. For the past two years, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of the 2017 technology gap prioritization and showcase our current portfolio of technology development projects. To date, 96 COR and 86 PCOS SAT proposals have been received, of which 22 COR and 28 PCOS projects were awarded. For more information, see the Program Annual Technology Reports available through the PO Technology web page at https://apd440.gsfc.nasa.gov/technology.html .

Data Crosscutting Requirements Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kleese van Dam, Kerstin; Shoshani, Arie; Plata, Charity

2013-04-01

In April 2013, a diverse group of researchers from the U.S. Department of Energy (DOE) scientific community assembled to assess data requirements associated with DOE-sponsored scientific facilities and large-scale experiments. Participants in the review included facilities staff, program managers, and scientific experts from the offices of Basic Energy Sciences, Biological and Environmental Research, High Energy Physics, and Advanced Scientific Computing Research. As part of the meeting, review participants discussed key issues associated with three distinct aspects of the data challenge: 1) processing, 2) management, and 3) analysis. These discussions identified commonalities and differences among the needs of varied scientific communities.more » They also helped to articulate gaps between current approaches and future needs, as well as the research advances that will be required to close these gaps. Moreover, the review provided a rare opportunity for experts from across the Office of Science to learn about their collective expertise, challenges, and opportunities. The "Data Crosscutting Requirements Review" generated specific findings and recommendations for addressing large-scale data crosscutting requirements.« less

Potential for yield improvement in combined rip-first and crosscut-first rough mill processing

Treesearch

Ed Thomas; Urs Buehlmann

2016-01-01

Traditionally, lumber cutting systems in rough mills have either first ripped lumber into wide strips and then crosscut the resulting strips into component lengths (rip-first), or first crosscut the lumber into component lengths, then ripped the segments to the required widths (crosscut-first). Each method has its advantages and disadvantages. Crosscut-first typically...

NASA Accountability Report

NASA Technical Reports Server (NTRS)

1997-01-01

NASA is piloting fiscal year (FY) 1997 Accountability Reports, which streamline and upgrade reporting to Congress and the public. The document presents statements by the NASA administrator, and the Chief Financial Officer, followed by an overview of NASA's organizational structure and the planning and budgeting process. The performance of NASA in four strategic enterprises is reviewed: (1) Space Science, (2) Mission to Planet Earth, (3) Human Exploration and Development of Space, and (4) Aeronautics and Space Transportation Technology. Those areas which support the strategic enterprises are also reviewed in a section called Crosscutting Processes. For each of the four enterprises, there is discussion about the long term goals, the short term objectives and the accomplishments during FY 1997. The Crosscutting Processes section reviews issues and accomplishments relating to human resources, procurement, information technology, physical resources, financial management, small and disadvantaged businesses, and policy and plans. Following the discussion about the individual areas is Management's Discussion and Analysis, about NASA's financial statements. This is followed by a report by an independent commercial auditor and the financial statements.

Intelligent transportation systems : what have we learned? A U.S. perspective

DOT National Transportation Integrated Search

2000-11-09

Presentation at International workshop on ITS benefits held Thursday, November 9, 2000, Madrid Room, Lingotto Centre, Turin, Italy. Presentation overview: : -ITS Services : -Cross-cutting program areas : -What does the future hold? : -What next steps...

Transfer and Cross‐Collateralization of Clean Water State Revolving Funds and Drinking Water State Revolving Funds

EPA Pesticide Factsheets

Link containing Federal laws and Executive Orders, including cross-cutting federal authorities, apply to projects and activities receiving assistance under the Clean Water State Revolving Fund (CWSRF) program.

NASA Astrophysics Prioritizes Technology Development Funding for Strategic Missions

NASA Astrophysics Data System (ADS)

Thronson, Harley A.; Pham, Bruce; Ganel, Opher

2017-01-01

The Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Program Offices (POs) reside at NASA GSFC and implement priorities for the NASA HQ Astrophysics Division (APD). One major aspect of the POs’ activities is managing our Strategic Astrophysics Technology (SAT) program to mature technologies for future strategic missions. The Programs follow APD guidance on which missions are strategic, currently informed by the NRC’s 2010 Decadal Survey report, as well as APD’s Implementation Plan and the Astrophysics Roadmap.In preparation for the upcoming 2020 Decadal Survey, the APD has established Science and Technology Definition Teams (STDTs) to study four large-mission concepts: the Origins Space Telescope, Habitable Exoplanet Imaging Mission, Large UV/Optical/IR Surveyor, and X-ray Surveyor. The STDTs will develop the science case and design reference mission, assess technology development needs, and estimate the cost of their concept. A fifth team, the L3 Study Team (L3ST), was charged to study potential US contributions to ESA’s planned L3 gravitational-wave observatory.The POs use a rigorous and transparent process to solicit technology gaps from the scientific and technical communities, and prioritize those entries based on strategic alignment, expected impact, cross-cutting applicability, and urgency. Starting in 2016, the technology-gap assessments of the four STDTs and the L3ST are included in our process. Until a study team submits its final report, community-proposed changes to gaps submitted or adopted by a study team are forwarded to that study team for consideration.We discuss our technology development process, with strategic prioritization informing calls for SAT proposals and informing investment decisions. We also present results of this year’s technology gap prioritization and showcase our current portfolio of technology development projects. To date, 77 COR and 80 PCOS SAT proposals have been received, of which 18 COR and 22 PCOS projects were funded (PCOS awards starting in 2017 have yet to be announced). For more information, see the respective Program Annual Technology Reports under the technology tabs of the COR website at cor.gsfc.nasa.gov and the PCOS website at pcos.gsfc.nasa.gov.

Industrial Waste Heat Recovery - Potential Applications, Available Technologies and Crosscutting R&D Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thekdi, Arvind; Nimbalkar, Sachin U.

2015-01-01

The purpose of this report was to explore key areas and characteristics of industrial waste heat and its generation, barriers to waste heat recovery and use, and potential research and development (R&D) opportunities. The report also provides an overview of technologies and systems currently available for waste heat recovery and discusses the issues or barriers for each. Also included is information on emerging technologies under development or at various stages of demonstrations, and R&D opportunities cross-walked by various temperature ranges, technology areas, and energy-intensive process industries.

Intelligent robotics can boost America's economic growth

NASA Technical Reports Server (NTRS)

Erickson, Jon D.

1994-01-01

A case is made for strategic investment in intelligent robotics as a part of the solution to the problem of improved global competitiveness for U.S. manufacturing, a critical industrial sector. Similar cases are made for strategic investments in intelligent robotics for field applications, construction, and service industries such as health care. The scope of the country's problems and needs is beyond the capability of the private sector alone, government alone, or academia alone to solve independently of the others. National cooperative programs in intelligent robotics are needed with the private sector supplying leadership direction and aerospace and non-aerospace industries conducting the development. Some necessary elements of such programs are outlined. The National Aeronautics and Space Administration (NASA) and the Lyndon B. Johnson Space Center (JSC) can be key players in such national cooperative programs in intelligent robotics for several reasons: (1) human space exploration missions require supervised intelligent robotics as enabling tools and, hence must develop supervised intelligent robotic systems; (2) intelligent robotic technology is being developed for space applications at JSC (but has a strong crosscutting or generic flavor) that is advancing the state of the art and is producing both skilled personnel and adaptable developmental infrastructure such as integrated testbeds; and (3) a NASA JSC Technology Investment Program in Robotics has been proposed based on commercial partnerships and collaborations for precompetitive, dual-use developments.

Intelligent transportation systems field operational test cross-cutting study : advanced traveler information systems

DOT National Transportation Integrated Search

1998-09-01

Approximately 2 million roadside inspections of commercial motor vehicles (CMVs) are conducted annually, primarily through the joint Federal and State Motor Carrier Safety Assistance Program (MCSAP). Vehicles and drivers with serious safety problems ...

U.S. Department of Transportation's research and development plan

DOT National Transportation Integrated Search

1999-05-01

As one of the most significant cross-cutting topics within the Department, this report document brings greater consistency and cohesion to the Department's separate R&D programs and to address transportation system-level performed through better coor...

Systems Engineering Model for ART Energy Conversion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendez Cruz, Carmen Margarita; Rochau, Gary E.; Wilson, Mollye C.

The near-term objective of the EC team is to establish an operating, commercially scalable Recompression Closed Brayton Cycle (RCBC) to be constructed for the NE - STEP demonstration system (demo) with the lowest risk possible. A systems engineering approach is recommended to ensure adequate requirements gathering, documentation, and mode ling that supports technology development relevant to advanced reactors while supporting crosscut interests in potential applications. A holistic systems engineering model was designed for the ART Energy Conversion program by leveraging Concurrent Engineering, Balance Model, Simplified V Model, and Project Management principles. The resulting model supports the identification and validation ofmore » lifecycle Brayton systems requirements, and allows designers to detail system-specific components relevant to the current stage in the lifecycle, while maintaining a holistic view of all system elements.« less

Innovative Technologies for Global Space Exploration

NASA Technical Reports Server (NTRS)

Hay, Jason; Gresham, Elaine; Mullins, Carie; Graham, Rachael; Williams-Byrd; Reeves, John D.

2012-01-01

Under the direction of NASA's Exploration Systems Mission Directorate (ESMD), Directorate Integration Office (DIO), The Tauri Group with NASA's Technology Assessment and Integration Team (TAIT) completed several studies and white papers that identify novel technologies for human exploration. These studies provide technical inputs to space exploration roadmaps, identify potential organizations for exploration partnerships, and detail crosscutting technologies that may meet some of NASA's critical needs. These studies are supported by a relational database of more than 400 externally funded technologies relevant to current exploration challenges. The identified technologies can be integrated into existing and developing roadmaps to leverage external resources, thereby reducing the cost of space exploration. This approach to identifying potential spin-in technologies and partnerships could apply to other national space programs, as well as international and multi-government activities. This paper highlights innovative technologies and potential partnerships from economic sectors that historically are less connected to space exploration. It includes breakthrough concepts that could have a significant impact on space exploration and discusses the role of breakthrough concepts in technology planning. Technologies and partnerships are from NASA's Technology Horizons and Technology Frontiers game-changing and breakthrough technology reports as well as the External Government Technology Dataset, briefly described in the paper. The paper highlights example novel technologies that could be spun-in from government and commercial sources, including virtual worlds, synthetic biology, and human augmentation. It will consider how these technologies can impact space exploration and will discuss ongoing activities for planning and preparing them.

Core Ideas of Engineering and Technology

ERIC Educational Resources Information Center

Sneider, Cary

2012-01-01

Last month, Rodger Bybee's article, "Scientific and Engineering Practices in K-12 Classrooms," provided an overview of Chapter 3 in "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). Chapter 3 describes the practices of science and engineering that students are expected to develop during 13 years…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melin, Alexander M.; Kisner, Roger A.; Drira, Anis

Embedded instrumentation and control systems that can operate in extreme environments are challenging due to restrictions on sensors and materials. As a part of the Department of Energy's Nuclear Energy Enabling Technology cross-cutting technology development programs Advanced Sensors and Instrumentation topic, this report details the design of a bench-scale embedded instrumentation and control testbed. The design goal of the bench-scale testbed is to build a re-configurable system that can rapidly deploy and test advanced control algorithms in a hardware in the loop setup. The bench-scale testbed will be designed as a fluid pump analog that uses active magnetic bearings tomore » support the shaft. The testbed represents an application that would improve the efficiency and performance of high temperature (700 C) pumps for liquid salt reactors that operate in an extreme environment and provide many engineering challenges that can be overcome with embedded instrumentation and control. This report will give details of the mechanical design, electromagnetic design, geometry optimization, power electronics design, and initial control system design.« less

NEET In-Pile Ultrasonic Sensor Enablement-FY 2012 Status Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

JE Daw; JL Rempe; BR Tittmann

2012-09-01

Several Department Of Energy-Nuclear Energy (DOE-NE) programs, such as the Fuel Cycle Research and Development, Advanced Reactor Concepts, Light Water Reactor Sustainability, and Next Generation Nuclear Plant programs, are investigating new fuels and materials for advanced and existing reactors. A key objective of such programs is to understand the performance of these fuels and materials when irradiated. The Nuclear Energy Enabling Technology (NEET) Advanced Sensors and Instrumentation (ASI) in-pile instrumentation development activities are focused upon addressing cross-cutting needs for DOE-NE irradiation testing by providing higher fidelity, real-time data, with increased accuracy and resolution from smaller, compact sensors that are lessmore » intrusive. Ultrasonic technologies offer the potential to measure a range of parameters, including geometry changes, temperature, crack initiation and growth, gas pressure and composition, and microstructural changes, under harsh irradiation test conditions. There are two primary issues associated with in-pile deployment of ultrasonic sensors. The first is transducer survivability. The ability of ultrasonic transducer materials to maintain their useful properties during an irradiation must be demonstrated. The second issue is signal processing. Ultrasonic testing is typically performed in a lab or field environment, where the sensor and sample are accessible. Due to the harsh nature of in-pile testing, and the range of measurements that are desired, an enhanced signal processing capability is needed to make in-pile ultrasonic sensors viable. This project addresses these technology deployment issues.« less

78 FR 41824 - Enhanced Mobility for Seniors and Individuals With Disabilities: Proposed Circular

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... recipient does not have a project identified that fits in either Category A or B, FTA recommends the funds... chapter describes cross-cutting FTA and Federal requirements that apply to the Section 5310 Program. FTA...

1. Drop Structure on the Arizona Crosscut Canal. Photographer unknown, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. Drop Structure on the Arizona Crosscut Canal. Photographer unknown, no date. Note that caption is incorrect: in relation to Camelback Mountain (rear), this can only be the Old Crosscut. Source: reprinted from the 13th Annual Report of the U.S. Geological Survey, 1893. - Old Crosscut Canal, North Side of Salt River, Phoenix, Maricopa County, AZ

Borehole Disposal and the Cradle-To-Grave Management Program for Radioactive Sealed Sources in Egypt

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cochran, J.R.; Carson, S.D.; El-Adham, K.

2006-07-01

The Integrated Management Program for Radioactive Sealed Sources (IMPRSS) is greatly improving the management of radioactive sealed sources (RSSs) in Egypt. When completed, IMPRSS will protect the people and the environment from another radioactive incident. The Government of Egypt and Sandia National Laboratories are collaboratively implementing IMPRSS. The integrated activities are divided into three broad areas: the safe management of RSSs in-use, the safe management of unwanted RSSs, and crosscutting infrastructure. Taken together, these work elements comprise a cradle-to-grave program. To ensure sustainability, the IMPRSS emphasizes such activities as human capacity development through technology transfer and training, and development ofmore » a disposal facility. As a key step in the development of a disposal facility, IMPRSS is conducting a safety assessment for intermediate-depth borehole disposal in thick arid alluvium in Egypt based on experience with the U.S.'s Greater Confinement Disposal boreholes. This safety assessment of borehole disposal is being supported by the International Atomic Energy Agency (IAEA) through an IAEA Technical Cooperation Project. (authors)« less

3. Photocopy of photograph (original located in SRP Archives) Probably ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Photocopy of photograph (original located in SRP Archives) Probably photographed by SRP, February 8, 1941 PROPOSED LOCATION OF ANCILLARY HYDRO UNIT EAST OF CROSSCUT STEAM PLANT ON BANK OF TAILRACE OF CROSSCUT CANAL ACROSS FROM ORIGINAL CROSSCUT HYDRO PLANT. - Crosscut Steam Plant, Ancillary Hydro Unit, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

30 CFR 75.507-1 - Electric equipment other than power-connection points; outby the last open crosscut; return air...

Code of Federal Regulations, 2010 CFR

2010-07-01

... points; outby the last open crosscut; return air; permissibility requirements. 75.507-1 Section 75.507-1... other than power-connection points; outby the last open crosscut; return air; permissibility... permit for noncompliance may be used in return air outby the last open crosscut for the duration of such...

Cross-cutting study of advanced rural transportation system ITS field operational tests

DOT National Transportation Integrated Search

1998-08-01

USDOT has funded seven Advanced Rural Transportation System (ARTS) projects focused on traveler safety under the ITS Field Operational Test Program. Booz-Allen & Hamilton was contracted to oversee the evaluation of these (as well as 50+ other) field ...

48 CFR 304.604 - Responsibilities.

Code of Federal Regulations, 2013 CFR

2013-10-01

...), Public Law (Pub. L.) 109-282, HHS acquisition officials and staff must report their contract information... effective HHS-wide ICAR data verification and validation program; and (ii) Identifying cross-cutting trends... reportable contracts and orders, including BPA orders and modifications thereto, are reported; (2) Review and...

48 CFR 304.604 - Responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

...), Public Law (Pub. L.) 109-282, HHS acquisition officials and staff must report their contract information... effective HHS-wide ICAR data verification and validation program; and (ii) Identifying cross-cutting trends... reportable contracts and orders, including BPA orders and modifications thereto, are reported; (2) Review and...

48 CFR 304.604 - Responsibilities.

Code of Federal Regulations, 2012 CFR

2012-10-01

...), Public Law (Pub. L.) 109-282, HHS acquisition officials and staff must report their contract information... effective HHS-wide ICAR data verification and validation program; and (ii) Identifying cross-cutting trends... reportable contracts and orders, including BPA orders and modifications thereto, are reported; (2) Review and...

48 CFR 304.604 - Responsibilities.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), Public Law (Pub. L.) 109-282, HHS acquisition officials and staff must report their contract information... effective HHS-wide ICAR data verification and validation program; and (ii) Identifying cross-cutting trends... reportable contracts and orders, including BPA orders and modifications thereto, are reported; (2) Review and...

48 CFR 304.604 - Responsibilities.

Code of Federal Regulations, 2014 CFR

2014-10-01

...), Public Law (Pub. L.) 109-282, HHS acquisition officials and staff must report their contract information... effective HHS-wide ICAR data verification and validation program; and (ii) Identifying cross-cutting trends... reportable contracts and orders, including BPA orders and modifications thereto, are reported; (2) Review and...

Professional Development for the Integration of Engineering in High School STEM Classrooms

ERIC Educational Resources Information Center

Singer, Jonathan E.; Ross, Julia M.; Jackson-Lee, Yvette

2016-01-01

Science, Technology, Engineering, and Mathematics (STEM) education in the U.S. is in transition. The recently published "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" as well as the "Next Generation Science Standards" are responsive to this call and clearly articulate a vision that…

M-Learning Challenges in Teaching Crosscutting Themes in the Education of Young People and Adults

ERIC Educational Resources Information Center

Ota, Marcos Andrei; de Araujo, Carlos Fernando, Jr.

2016-01-01

The challenges faced in using new technologies in the classroom are numerous, but contributions generated with their resolution can proportionately provide original and efficient teaching practices more in tune to students' eager learning needs. This article presents some strategies developed to help teachers in transversal themes classes using…

Games for Learning: Vast Wasteland or a Digital Promise?

ERIC Educational Resources Information Center

Levine, Michael H.; Vaala, Sarah E.

2013-01-01

Research about emerging best practices in the learning sciences points to the potential of deploying digital games as one possible solution to the twin challenges of weak student engagement and the need for more robust achievement in literacy, science, technology, and math. This chapter reviews key cross-cutting themes in this special volume,…

Combining Domain-driven Design and Mashups for Service Development

NASA Astrophysics Data System (ADS)

Iglesias, Carlos A.; Fernández-Villamor, José Ignacio; Del Pozo, David; Garulli, Luca; García, Boni

This chapter presents the Romulus project approach to Service Development using Java-based web technologies. Romulus aims at improving productivity of service development by providing a tool-supported model to conceive Java-based web applications. This model follows a Domain Driven Design approach, which states that the primary focus of software projects should be the core domain and domain logic. Romulus proposes a tool-supported model, Roma Metaframework, that provides an abstraction layer on top of existing web frameworks and automates the application generation from the domain model. This metaframework follows an object centric approach, and complements Domain Driven Design by identifying the most common cross-cutting concerns (security, service, view, ...) of web applications. The metaframework uses annotations for enriching the domain model with these cross-cutting concerns, so-called aspects. In addition, the chapter presents the usage of mashup technology in the metaframework for service composition, using the web mashup editor MyCocktail. This approach is applied to a scenario of the Mobile Phone Service Portability case study for the development of a new service.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sofu, Tanju; LaChance, Jeffrey L.; Bari, R.

This report proposes potential research priorities for the Department of Energy (DOE) with the intent of improving the licensability of the Sodium Fast Reactor (SFR). In support of this project, five panels were tasked with identifying potential safety-related gaps in available information, data, and models needed to support the licensing of a SFR. The areas examined were sodium technology, accident sequences and initiators, source term characterization, codes and methods, and fuels and materials. It is the intent of this report to utilize a structured and transparent process that incorporates feedback from all interested stakeholders to suggest future funding priorities formore » the SFR research and development. While numerous gaps were identified, two cross-cutting gaps related to knowledge preservation were agreed upon by all panels and should be addressed in the near future. The first gap is a need to re-evaluate the current procedures for removing the Applied Technology designation from old documents. The second cross-cutting gap is the need for a robust Knowledge Management and Preservation system in all SFR research areas. Closure of these and the other identified gaps will require both a reprioritization of funding within DOE as well as a re-evaluation of existing bureaucratic procedures within the DOE associated with Applied Technology and Knowledge Management.« less

CESAR robotics and intelligent systems research for nuclear environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, R.C.

1992-07-01

The Center for Engineering Systems Advanced Research (CESAR) at the Oak Ridge National Laboratory (ORNL) encompasses expertise and facilities to perform basic and applied research in robotics and intelligent systems in order to address a broad spectrum of problems related to nuclear and other environments. For nuclear environments, research focus is derived from applications in advanced nuclear power stations, and in environmental restoration and waste management. Several programs at CESAR emphasize the cross-cutting technology issues, and are executed in appropriate cooperation with projects that address specific problem areas. Although the main thrust of the CESAR long-term research is on developingmore » highly automated systems that can cooperate and function reliably in complex environments, the development of advanced human-machine interfaces represents a significant part of our research. 11 refs.« less

CESAR robotics and intelligent systems research for nuclear environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, R.C.

1992-01-01

The Center for Engineering Systems Advanced Research (CESAR) at the Oak Ridge National Laboratory (ORNL) encompasses expertise and facilities to perform basic and applied research in robotics and intelligent systems in order to address a broad spectrum of problems related to nuclear and other environments. For nuclear environments, research focus is derived from applications in advanced nuclear power stations, and in environmental restoration and waste management. Several programs at CESAR emphasize the cross-cutting technology issues, and are executed in appropriate cooperation with projects that address specific problem areas. Although the main thrust of the CESAR long-term research is on developingmore » highly automated systems that can cooperate and function reliably in complex environments, the development of advanced human-machine interfaces represents a significant part of our research. 11 refs.« less

Multi-Scale Sizing of Lightweight Multifunctional Spacecraft Structural Components

NASA Technical Reports Server (NTRS)

Bednarcyk, Brett A.

2005-01-01

This document is the final report for the project entitled, "Multi-Scale Sizing of Lightweight Multifunctional Spacecraft Structural Components," funded under the NRA entitled "Cross-Enterprise Technology Development Program" issued by the NASA Office of Space Science in 2000. The project was funded in 2001, and spanned a four year period from March, 2001 to February, 2005. Through enhancements to and synthesis of unique, state of the art structural mechanics and micromechanics analysis software, a new multi-scale tool has been developed that enables design, analysis, and sizing of advance lightweight composite and smart materials and structures from the full vehicle, to the stiffened structure, to the micro (fiber and matrix) scales. The new software tool has broad, cross-cutting value to current and future NASA missions that will rely on advanced composite and smart materials and structures.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pierce, Eric M.; Freshley, Mark D.; Hubbard, Susan S.

In this report, we start by examining previous efforts at linking science and DOE EM research with cleanup activities. Many of these efforts were initiated by creating science and technology roadmaps. A recurring feature of successfully implementing these roadmaps into EM applied research efforts and successful cleanup is the focus on integration. Such integration takes many forms, ranging from combining information generated by various scientific disciplines, to providing technical expertise to facilitate successful application of novel technology, to bringing the resources and creativity of many to address the common goal of moving EM cleanup forward. Successful projects identify and focusmore » research efforts on addressing the problems and challenges that are causing “failure” in actual cleanup activities. In this way, basic and applied science resources are used strategically to address the particular unknowns that are barriers to cleanup. The brief descriptions of the Office of Science basic (Environmental Remediation Science Program [ERSP]) and EM’s applied (Groundwater and Soil Remediation Program) research programs in subsurface science provide context to the five “crosscutting” themes that have been developed in this strategic planning effort. To address these challenges and opportunities, a tiered systematic approach is proposed that leverages basic science investments with new applied research investments from the DOE Office of Engineering and Technology within the framework of the identified basic science and applied research crosscutting themes. These themes are evident in the initial portfolio of initiatives in the EM groundwater and soil cleanup multi-year program plan. As stated in a companion document for tank waste processing (Bredt et al. 2008), in addition to achieving its mission, DOE EM is experiencing a fundamental shift in philosophy from driving to closure to enabling the long-term needs of DOE and the nation.« less

Adolescent Health. Volume III: Crosscutting Issues in the Delivery of Health and Related Services.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This document, the third of three volumes in the U.S. Congress Office of Technology Assessment's "Adolescent Health" series, contains chapters 15 through 19, which address issues in the delivery of health and related services to adolescents. Chapter 15 reviews research on the shortcomings of the mainstream primary health care system with…

The Use of Probeware to Improve Learning Outcomes in Middle School Science: A Mixed Methods Case Study

ERIC Educational Resources Information Center

Price, Elizabeth Lamond

2017-01-01

The Next Generation Science Standards (NGSS) call upon K-12 science teachers to provide authentic science and engineering practices which deepen understanding of core ideas and crosscutting concepts (NGSS Lead States, 2013). Probeware technology provides exposure to these scientific practices; however, there is a disconnect between the frequency…

Intelligent transportation systems at highway-rail intersections : a cross-cutting study : improving safety and mobility at highway-rail grade crossings

DOT National Transportation Integrated Search

2001-12-01

In 1997, the ITS Joint Program Office (JPO) at the Federal Highway Administration commissioned a study to identify projects being conducted in the U.S. that used Intelligent Transportation Systems (ITS) at highway-rail grade crossings, including not ...

76 FR 36908 - Draft Competition Rules for a Global Appliance Efficiency Award for Televisions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-23

... solicitation of comments. SUMMARY: The U.S. Department of Energy (DOE) is working with partner governments... program can be directed to: Mr. Arne Jacobson, Senior Advisor, DOE Office of Policy and International... working groups, covering standards and test procedures, awards, procurement, incentives, and cross-cutting...

The RITES Way for NGSS Success

NASA Astrophysics Data System (ADS)

Murray, D. P.; De Oliveira, G.; Caulkins, J. L.; Veeger, A. I.; McLaren, P. J.

2012-12-01

The NRC's Framework for Science Education describes a new vision for science education: practical experience, thought process, and connecting ideas are not lost in a sea of endless information. That is because the Framework does not emphasize broad coverage of all subfields of science. Instead, they identify ideas in three dimensions that lend themselves to the creation of opportunities for a deeper understanding of science, namely, Science and Engineering Practices, Disciplinary Core Ideas, and Crosscutting Concepts. Developed with fidelity to the Framework the K-12 Next Generation Science Standards (NGSS) will provide a rich, cohesive set of standards in all disciplines designed to engage all students in the practices and apply crosscutting concepts to deepen their understanding of the core ideas within these discipline. In Rhode Island, for the last four years, the Rhode Island Technology Enhanced Science Project (RITES) has aimed to transform the quality of science teaching and learning at all secondary schools, with a similar vision to the Framework and NGSS. RITES was initially developed to closely align with existing state standards (Grade Span Expectations). As the work of developing new standards progresses, Rhode Island, as a NGSS Lead State Partner, established the RI-NGSS State Leadership Team, which was charged with providing feedback to the NGSS Writing Team. The inclusion of nine RITES personnel in this state team ensures that this project will quickly adjust to the new standards, even as they are being developed and refined. A main component of RITES is a professional development program for teachers, framed around summer workshops and projects during the school year. At the heart of the PD are Investigations, modules developed by scientist/teacher teams designed to engage students through science practices while presenting core ideas and crosscutting concepts. Around fifty investigations, drawn from the life, physical, and earth & space sciences (ESS), employ a web-based platform to explore models and analyze data collected by students. Formative and summative assessment tools are built into the investigations. Investigation topics include: rock cycle; measurements in astronomy; plate tectonics; seasons; nuclear decay; and phases of the moon. We will showcase at least two ESS investigations that exemplify the three dimensional components envisioned by the Framework.

NASA Land Cover and Land Use Change (LCLUC): an interdisciplinary research program.

PubMed

Justice, Chris; Gutman, Garik; Vadrevu, Krishna Prasad

2015-01-15

Understanding Land Cover/Land Use Change (LCLUC) in diverse regions of the world and at varied spatial scales is one of the important challenges in global change research. In this article, we provide a brief overview of the NASA LCLUC program, its focus areas, and the importance of satellite remote sensing observations in LCLUC research including future directions. The LCLUC Program was designed to be a cross-cutting theme within NASA's Earth Science program. The program aims to develop and use remote sensing technologies to improve understanding of human interactions with the environment. Since 1997, the NASA LCLUC program has supported nearly 280 research projects on diverse topics such as forest loss and carbon, urban expansion, land abandonment, wetland loss, agricultural land use change and land use change in mountain systems. The NASA LCLUC program emphasizes studies where land-use changes are rapid or where there are significant regional or global LCLUC implications. Over a period of years, the LCLUC program has contributed to large regional science programs such as Land Biosphere-Atmosphere (LBA), the Northern Eurasia Earth Science Partnership Initiative (NEESPI), and the Monsoon Area Integrated Regional Study (MAIRS). The primary emphasis of the program will remain on using remote sensing datasets for LCLUC research. The program will continue to emphasize integration of physical and social sciences to address regional to global scale issues of LCLUC for the benefit of society. Copyright © 2014. Published by Elsevier Ltd.

A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas

ERIC Educational Resources Information Center

National Academies Press, 2012

2012-01-01

Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S.…

Museum Monsters and Victorious Viruses: Improving Public Understanding of Emerging Biomedical Research

PubMed Central

Diamond, Judy; Jee, Benjamin; Matuk, Camilla; McQuillan, Julia; Spiegel, Amy N.; Uttal, David

2015-01-01

Although microbes directly impact everyone's health, most people have limited knowledge about them. In this article, we describe a museum and media public education campaign aimed at helping diverse audiences better understand emerging knowledge about microbes and infectious disease. Funded primarily by the Science Education Partnership (SEPA) program of the National Institutes of Health, this campaign involved crosscutting programs designed to extend impacts throughout a broad public audience. PMID:26392634

Early Education and Care: Overlap Indicates Need To Assess Crosscutting Programs. Report to the Chairman, Subcommittee on Oversight of Government Management, Restructuring and the District of Columbia, U.S. Senate.

ERIC Educational Resources Information Center

Shaul, Marnie S.

In response to Congressional requests reflecting the nationwide attention on early childhood education (ECE) and care, the General Accounting Office assessed the federally funded programs that provide or support ECE and care for children under 5 years. Information was obtained by means of an electronic search of the June 1999 Catalog of Federal…

Effects of an Interdisciplinary Science Professional Development Program on Teacher Pedagogical Content Knowledge, Science Inquiry Instruction, and Student Understanding of Science Crosscutting Concepts in Twelve Public Schools: A Multi-Level Modeling Study

ERIC Educational Resources Information Center

Yang, Yang

2017-01-01

Systematic studies on effectiveness of in-service teacher professional development (PD) are important for science education research and practice. Previous studies mostly focus on one certain aspect of the entire program, for example, effectiveness of PD on improvement of teachers' knowledge or students' learning outcomes. This study, however,…

40 CFR 35.3575 - Application of Federal cross-cutting authorities (cross-cutters).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 1 2011-07-01 2011-07-01 false Application of Federal cross-cutting authorities (cross-cutters). 35.3575 Section 35.3575 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....3575 Application of Federal cross-cutting authorities (cross-cutters). (a) General. A number of Federal...

40 CFR 35.3575 - Application of Federal cross-cutting authorities (cross-cutters).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Application of Federal cross-cutting authorities (cross-cutters). 35.3575 Section 35.3575 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY....3575 Application of Federal cross-cutting authorities (cross-cutters). (a) General. A number of Federal...

Science and Observation Recommendations for Future NASA Carbon Cycle Research

NASA Technical Reports Server (NTRS)

McClain, Charles R.; Collatz, G. J.; Kawa, S. R.; Gregg, W. W.; Gervin, J. C.; Abshire, J. B.; Andrews, A. E.; Behrenfeld, M. J.; Demaio, L. D.; Knox, R. G.

2002-01-01

Between October 2000 and June 2001, an Agency-wide planning, effort was organized by elements of NASA Goddard Space Flight Center (GSFC) to define future research and technology development activities. This planning effort was conducted at the request of the Associate Administrator of the Office of Earth Science (Code Y), Dr. Ghassem Asrar, at NASA Headquarters (HQ). The primary points of contact were Dr. Mary Cleave, Deputy Associate Administrator for Advanced Planning at NASA HQ (Headquarters) and Dr. Charles McClain of the Office of Global Carbon Studies (Code 970.2) at GSFC. During this period, GSFC hosted three workshops to define the science requirements and objectives, the observational and modeling requirements to meet the science objectives, the technology development requirements, and a cost plan for both the science program and new flight projects that will be needed for new observations beyond the present or currently planned. The plan definition process was very intensive as HQ required the final presentation package by mid-June 2001. This deadline was met and the recommendations were ultimately refined and folded into a broader program plan, which also included climate modeling, aerosol observations, and science computing technology development, for contributing to the President's Climate Change Research Initiative. This technical memorandum outlines the process and recommendations made for cross-cutting carbon cycle research as presented in June. A separate NASA document outlines the budget profiles or cost analyses conducted as part of the planning effort.

Furniture rough mill costs evaluated by computer simulation

Treesearch

R. Bruce Anderson

1983-01-01

A crosscut-first furniture rough mill was simulated to evaluate processing and raw material costs on an individual part basis. Distributions representing the real-world characteristics of lumber, equipment feed speeds, and processing requirements are programed into the simulation. Costs of parts from a specific cutting bill are given, and effects of lumber input costs...

Health Systems Science Curricula in Undergraduate Medical Education: Identifying and Defining a Potential Curricular Framework.

PubMed

Gonzalo, Jed D; Dekhtyar, Michael; Starr, Stephanie R; Borkan, Jeffrey; Brunett, Patrick; Fancher, Tonya; Green, Jennifer; Grethlein, Sara Jo; Lai, Cindy; Lawson, Luan; Monrad, Seetha; O'Sullivan, Patricia; Schwartz, Mark D; Skochelak, Susan

2017-01-01

The authors performed a review of 30 Accelerating Change in Medical Education full grant submissions and an analysis of the health systems science (HSS)-related curricula at the 11 grant recipient schools to develop a potential comprehensive HSS curricular framework with domains and subcategories. In phase 1, to identify domains, grant submissions were analyzed and coded using constant comparative analysis. In phase 2, a detailed review of all existing and planned syllabi and curriculum documents at the grantee schools was performed, and content in the core curricular domains was coded into subcategories. The lead investigators reviewed and discussed drafts of the categorization scheme, collapsed and combined domains and subcategories, and resolved disagreements via group discussion. Analysis yielded three types of domains: core, cross-cutting, and linking. Core domains included health care structures and processes; health care policy, economics, and management; clinical informatics and health information technology; population and public health; value-based care; and health system improvement. Cross-cutting domains included leadership and change agency; teamwork and interprofessional education; evidence-based medicine and practice; professionalism and ethics; and scholarship. One linking domain was identified: systems thinking. This broad framework aims to build on the traditional definition of systems-based practice and highlight the need for medical and other health professions schools to better align education programs with the anticipated needs of the systems in which students will practice. HSS will require a critical investigation into existing curricula to determine the most efficient methods for integration with the basic and clinical sciences.

Designing the framework for competency-based master of public health programs in India.

PubMed

Sharma, Kavya; Zodpey, Sanjay; Morgan, Alison; Gaidhane, Abhay; Syed, Zahiruddin Quazi; Kumar, Rajeev

2013-01-01

Competency in the practice of public health is the implicit goal of education institutions that offer master of public health (MPH) programs. With the expanding number of institutions offering courses in public health in India, it is timely to develop a common framework to ensure that graduates are proficient in critical public health. Steps such as situation assessment, survey of public health care professionals in India, and national consultation were undertaken to develop a proposed competency-based framework for MPH programs in India. The existing curricula of all 23 Indian MPH courses vary significantly in content with regard to core, concentration, and crosscutting discipline areas and course durations. The competency or learning outcome is not well defined. The findings of the survey suggest that MPH graduates in India should have competencies ranging from monitoring of health problems and epidemics in the community, applying biostatistics in public health, conducting action research, understanding social and community influence on public health developing indicators and instruments to monitor and evaluate community health programs, developing proposals, and involving community in planning, delivery, and monitoring of health programs. Competency statements were framed and mapped with domains including epidemiology, biostatistics, social and behavioral sciences, health care system, policy, planning, and financing, and environmental health sciences and a crosscutting domain that include health communication and informatics, health management and leadership, professionalism, systems thinking, and public health biology. The proposed competency-based framework for Indian MPH programs can be adapted to meet the needs of diverse, unique programs. The framework ensures the uniqueness and diversity of individual MPH programs in India while contributing to measures of overall program success.

75 FR 33323 - Notice of Availability: Notice of HUD's Fiscal Year (FY) 2010 Notice of Funding Availability...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-11

... Fair Housing; (4) Capacity Building and Knowledge Sharing; (5) Using Housing as a Platform for Improving Other Outcomes; and (6) Expanding Cross-Cutting Policy Knowledge. Detailed information on HUD's Strategic Plan for FY2010-2015 is available at: http://portal.hud.gov/portal/page/portal/HUD/program_offices...

OPTIGRAMI V2 user's guide

Treesearch

Penny S. Lawson; R. Edward Thomas; Elizabeth S Walker

1996-01-01

OPTIGRAMI V2 is a computer program available for IBM persaonl computer with 80286 and higher processors. OPTIGRAMI V2 determines the least-cost lumber grade mix required to produce a given cutting order for clear parts from rough lumber of known grades in a crosscut-first rough mill operation. It is a user-friendly integrated application that includes optimization...

1. 8' x 10' enlargement from 4' x 5' negative ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

1. 8' x 10' enlargement from 4' x 5' negative Kevin Kriesel-Coons, Photographer, November 13, 1990 EXTERIOR OF HYDRO PLANT, SHOWING CURRENT STATE OF DISREPAIR. VIEW FROM WALKWAY OVER TAILRACE OF CROSSCUT CANAL TO THE LARGER, ORIGINAL CROSSCUT HYDRO PLANT. - Crosscut Steam Plant, Ancillary Hydro Unit, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byrer, C.W.; Layne, A.W.; Guthrie, H.D.

The U.S. Department of Energy (DOE), at its Morgantown Energy Technology Center, has been involved in natural gas research since the 1970`s. DOE has assessed the potential of gas in coals throughout the U.S. and promoted research and development for recovery and use of methane found in minable and unminable coalbeds. DOE efforts have focused on the use of coal mine methane for regional economic gas self-sufficiency, energy parks, self-help initiatives, and small-power generation. This paper focuses on DOE`s past and present efforts to more effectively and efficiently recover and use this valuable domestic energy source. The Climate Change Actionmore » Plan (CCAP) (1) lists a series of 50 voluntary initiatives designed to reduce greenhouse gas emissions, such as methane from mining operations, to their 1990 levels. Action No. 36 of the CCAP expands the DOE research, development, and demonstration (RD&D) efforts to broaden the range of cost-effective technologies and practices for recovering methane associated with coal mining operations. The major thrust of Action No. 36 is to reduce methane emissions associated with coal mining operations from target year 2000 levels by 1.5 MMT of carbon equivalent. Crosscutting activities in the DOE Natural Gas Program supply the utilization sectors will address RD&D to reduce methane emissions released from various mining operations, focusing on recovery and end use technology systems to effectively drain, capture, and utilize the emitted gas. Pilot projects with industry partners will develop and test the most effective methods and technology systems for economic recovery and utilization of coal mine gas emissions in regions where industry considers efforts to be presently non-economic. These existing RD&D programs focus on near-term gas recovery and gathering systems, gas upgrading, and power generation.« less

Space Assembly of Large Structural System Architectures (SALSSA)

NASA Technical Reports Server (NTRS)

Dorsey, John T.; Watson, Judith J.

2016-01-01

Developing a robust capability for Space Assembly of Large Spacecraft Structural System Architectures (SALSSA) has the potential to drastically increase the capabilities and performance of future space missions and spacecraft while significantly reducing their cost. Currently, NASA architecture studies and space science decadal surveys identify new missions that would benefit from SALSSA capabilities, and the technologies that support SALSSA are interspersed throughout the fourteen NASA Technology Roadmaps. However, a major impediment to the strategic development of cross-cutting SALSSA technologies is the lack of an integrated and comprehensive compilation of the necessary information. This paper summarizes the results of a small study that used an integrated approach to formulate a SALSSA roadmap and associated plan for developing key SALSSA technologies.

Collaborative Undergraduate HBCU Student Summer Prostate Cancer Training Program

DTIC Science & Technology

2010-03-01

of prostate cancer among community members, and tips for preparing graduate school applications. Disparities research was a cross-cutting theme in...Prostate Cancer Research: Perspectives of Community Members HCC Cancer Disparities Board Members and Jim Etheredge, MPA Coordinator, HCC Cancer... Community Coalitions to Combat Health Disparities Mr. David Rivers, Director of Public Information and Community Outreach and Research Associate

Chapter 13: Assessing Persistence and Other Evaluation Issues Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Violette, Daniel M.

Addressing other evaluation issues that have been raised in the context of energy efficiency programs, this chapter focuses on methods used to address the persistence of energy savings, which is an important input to the benefit/cost analysis of energy efficiency programs and portfolios. In addition to discussing 'persistence' (which refers to the stream of benefits over time from an energy efficiency measure or program), this chapter provides a summary treatment of these issues -Synergies across programs -Rebound -Dual baselines -Errors in variables (the measurement and/or accuracy of input variables to the evaluation).

Chapter 11: Sample Design Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Khawaja, M. Sami; Rushton, Josh

Evaluating an energy efficiency program requires assessing the total energy and demand saved through all of the energy efficiency measures provided by the program. For large programs, the direct assessment of savings for each participant would be cost-prohibitive. Even if a program is small enough that a full census could be managed, such an undertaking would almost always be an inefficient use of evaluation resources. The bulk of this chapter describes methods for minimizing and quantifying sampling error. Measurement error and regression error are discussed in various contexts in other chapters.

Deep understanding of electromagnetism using crosscutting concepts

NASA Astrophysics Data System (ADS)

De Poorter, John; De Lange, Jan; Devoldere, Lies; Van Landeghem, Jouri; Strubbe, Katrien

2017-01-01

Crosscutting concepts like patterns and models are fundamental parts in both the American framework of science education (from the AAAS) and our proposals for a new science education framework in Flanders. These concepts deepen the insight of both students and teachers. They help students to ask relevant questions during an inquiry and they give an understanding in how scientists built up their scientific theories. We illustrate the didactical possibilities of crosscutting concepts within the field of electromagnetism.

Controlling Subsurface Fractures and Fluid Flow: A Basic Research Agenda

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pyrak-Nolte, Laura J; DePaolo, Donald J.; Pietraß, Tanja

2015-05-22

From beneath the surface of the earth, we currently obtain about 80-percent of the energy our nation consumes each year. In the future we have the potential to generate billions of watts of electrical power from clean, green, geothermal energy sources. Our planet’s subsurface can also serve as a reservoir for storing energy produced from intermittent sources such as wind and solar, and it could provide safe, long-term storage of excess carbon dioxide, energy waste products and other hazardous materials. However, it is impossible to underestimate the complexities of the subsurface world. These complexities challenge our ability to acquire themore » scientific knowledge needed for the efficient and safe exploitation of its resources. To more effectively harness subsurface resources while mitigating the impacts of developing and using these resources, the U.S. Department of Energy established SubTER – the Subsurface Technology and Engineering RD&D Crosscut team. This DOE multi-office team engaged scientists and engineers from the national laboratories to assess and make recommendations for improving energy-related subsurface engineering. The SubTER team produced a plan with the overall objective of “adaptive control of subsurface fractures and fluid flow.”This plan revolved around four core technological pillars—Intelligent Wellbore Systems that sustain the integrity of the wellbore environment; Subsurface Stress and Induced Seismicity programs that guide and optimize sustainable energy strategies while reducing the risks associated with subsurface injections; Permeability Manipulation studies that improve methods of enhancing, impeding and eliminating fluid flow; and New Subsurface Signals that transform our ability to see into and characterize subsurface systems. The SubTER team developed an extensive R&D plan for advancing technologies within these four core pillars and also identified several areas where new technologies would require additional basic research. In response, the Office of Science, through its Office of Basic Energy Science (BES), convened a roundtable consisting of 15 national lab, university and industry geoscience experts to brainstorm basic research areas that underpin the SubTER goals but are currently underrepresented in the BES research portfolio. Held in Germantown, Maryland on May 22, 2015, the round-table participants developed a basic research agenda that is detailed in this report. Highlights include the following: -A grand challenge calling for advanced imaging of stress and geological processes to help understand how stresses and chemical substances are distributed in the subsurface—knowledge that is critical to all aspects of subsurface engineering; -A priority research direction aimed at achieving control of fluid flow through fractured media; -A priority research direction aimed at better understanding how mechanical and geochemical perturbations to subsurface rock systems are coupled through fluid and mineral interactions; -A priority research direction aimed at studying the structure, permeability, reactivity and other properties of nanoporous rocks, like shale, which have become critical energy materials and exhibit important hallmarks of mesoscale materials; -A cross-cutting theme that would accelerate development of advanced computational methods to describe heterogeneous time-dependent geologic systems that could, among other potential benefits, provide new and vastly improved models of hydraulic fracturing and its environmental impacts; -A cross-cutting theme that would lead to the creation of “geo-architected materials” with controlled repeatable heterogeneity and structure that can be tested under a variety of thermal, hydraulic, chemical and mechanical conditions relevant to subsurface systems; -A cross-cutting theme calling for new laboratory studies on both natural and geo-architected subsurface materials that deploy advanced high-resolution 3D imaging and chemical analysis methods to determine the ;rates and mechanisms of fluid-rock processes, and to test predictive models of such phenomena. Many of the key energy challenges of the future demand a greater understanding of the subsurface world in all of its complexity. This greater under- standing will improve the ability to control and manipulate the subsurface world in ways that will benefit both the economy and the environment. This report provides specific basic research pathways to address some of the most fundamental issues of energy-related subsurface engineering.« less

11. AERIAL VIEW OF CROSSCUT FACILITY, LOOKING NORTH. THE HYDRO ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. AERIAL VIEW OF CROSSCUT FACILITY, LOOKING NORTH. THE HYDRO PLANT CENTER SITS ON THE EDGE OF RAVINE WHICH IS ACTUALLY THE BEGINNING OF THE GRAND CANAL. THE CROSS-CUT STEAM PLANT IS THE LARGE WHITE BUILDING JUST WEST OF THE HYDRO PLANT, WITH THE TRANSMISSION SWITCHYARD IN BETWEEN. THE OTHER BUILDINGS ARE SALT RIVER PROJECT FABRICATION AND EQUIPMENT SHOPS Photographer unknown, August 22, 1958 - Cross Cut Hydro Plant, North Side of Salt River, Tempe, Maricopa County, AZ

PROJECT W-551 DETERMINATION DATA FOR EARLY LAW INTERIM PRETREATMENT SYSTEM SELECTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

TEDESCHI AR

This report provides the detailed assessment forms and data for selection of the solids separation and cesium separation technology for project W-551, Interim Pretreatment System. This project will provide early pretreated low activity waste feed to the Waste Treatment Plant to allow Waste Treatment Plan Low Activity Waste facility operation prior to construction completion of the Pretreatment and High Level Waste facilities. The candidate solids separations technologies are rotary microfiltration and crossflow filtration, and the candidate cesium separation technologies are fractional crystallization, caustic-side solvent extraction, and ion-exchange using spherical resorcinol-formaldehyde resin. This data was used to prepare a cross-cutting technologymore » summary, reported in RPP-RPT-37740.« less

Basic Science for a Secure Energy Future

NASA Astrophysics Data System (ADS)

Horton, Linda

2010-03-01

Anticipating a doubling in the world's energy use by the year 2050 coupled with an increasing focus on clean energy technologies, there is a national imperative for new energy technologies and improved energy efficiency. The Department of Energy's Office of Basic Energy Sciences (BES) supports fundamental research that provides the foundations for new energy technologies and supports DOE missions in energy, environment, and national security. The research crosses the full spectrum of materials and chemical sciences, as well as aspects of biosciences and geosciences, with a focus on understanding, predicting, and ultimately controlling matter and energy at electronic, atomic, and molecular levels. In addition, BES is the home for national user facilities for x-ray, neutron, nanoscale sciences, and electron beam characterization that serve over 10,000 users annually. To provide a strategic focus for these programs, BES has held a series of ``Basic Research Needs'' workshops on a number of energy topics over the past 6 years. These workshops have defined a number of research priorities in areas related to renewable, fossil, and nuclear energy -- as well as cross-cutting scientific grand challenges. These directions have helped to define the research for the recently established Energy Frontier Research Centers (EFRCs) and are foundational for the newly announced Energy Innovation Hubs. This overview will review the current BES research portfolio, including the EFRCs and user facilities, will highlight past research that has had an impact on energy technologies, and will discuss future directions as defined through the BES workshops and research opportunities.

Ocean research plan reviewed

NASA Astrophysics Data System (ADS)

Zielinski, Sarah

A draft plan setting out priorities for U.S. ocean research generally was lauded for its clear and well-articulated view in a recent report from a committee of the U.S. National Research Council (NRC) of the US. National Academies. However, the committee advised that the plan would benefit from a bold vision for the future of ocean science research, additional details, and a reorganization to include cross-cutting research.The draft "Charting the Course for Ocean Science in the United States: Research Priorities for the Next Decade" was made available for public comment in September 2006 by the U.S. National Science and Technology Council's Joint Subcommittee on Ocean Science and Technology.

Crosscutting Issues in International Transformation: Interactions and Innovations among People, Organizations, Processes, and Technology

DTIC Science & Technology

2009-12-01

in the process of reaching this goal. We hope that this book is valuable to you as you seek to transform your part of the world. Ralph O...missions and operations; lead NATO military transformation; and improve relationships , interaction, and practical cooperation with partners, nations...the Multiple Futures Project or most other future studies will you find anything about the central element of the problem—learning how to think about

PHYSICAL INFRASTRUCTURE: Crosscutting Issues Planning Conference Report

DTIC Science & Technology

2001-10-01

critical for reducing water use. As soon as you shift to increasing block tariffs, this will result in changing cropping patterns that reduce...because, as we manage our load, we can also manage our costs. I wanted to give you an idea of the context of energy use in the federal...Energy Management Program, Department of EnergyNext, to enhance indoor environmental quality, think about things, such as whether you have daylighting

6. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE60 ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE-60 CYCLE FREQUENCY CHANGER Photographer unknown, December 14, 1940 - Cross Cut Hydro Plant, North Side of Salt River, Tempe, Maricopa County, AZ

2. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

2. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE GENERATING UNITS AND EXCITER UNITS FOREGROUND Photographer unknown, March 4, 1953 - Cross Cut Hydro Plant, North Side of Salt River, Tempe, Maricopa County, AZ

The visible human and digital anatomy learning initiative.

PubMed

Dev, Parvati; Senger, Steven

2005-01-01

A collaborative initiative is starting within the Internet2 Health Science community to explore the development of a framework for providing access to digital anatomical teaching resources over Internet2. This is a cross-cutting initiative with broad applicability and will require the involvement of a diverse collection of communities. It will seize an opportunity created by a convergence of needs and technical capabilities to identify the technologies and standards needed to support a sophisticated collection of tools for teaching anatomy.

Post-Cold War Science and Technology at Los Alamos

NASA Astrophysics Data System (ADS)

Browne, John C.

2002-04-01

Los Alamos National Laboratory serves the nation through the development and application of leading-edge science and technology in support of national security. Our mission supports national security by: ensuring the safety, security, and reliability of the U.S. nuclear stockpile; reducing the threat of weapons of mass destruction in support of counter terrorism and homeland defense; and solving national energy, environment, infrastructure, and health security problems. We require crosscutting fundamental and advanced science and technology research to accomplish our mission. The Stockpile Stewardship Program develops and applies, advanced experimental science, computational simulation, and technology to ensure the safety and reliability of U.S. nuclear weapons in the absence of nuclear testing. This effort in itself is a grand challenge. However, the terrorist attack of September 11, 2001, reminded us of the importance of robust and vibrant research and development capabilities to meet new and evolving threats to our national security. Today through rapid prototyping we are applying new, innovative, science and technology for homeland defense, to address the threats of nuclear, chemical, and biological weapons globally. Synergistically, with the capabilities that we require for our core mission, we contribute in many other areas of scientific endeavor. For example, our Laboratory has been part of the NASA effort on mapping water on the moon and NSF/DOE projects studying high-energy astrophysical phenomena, understanding fundamental scaling phenomena of life, exploring high-temperature superconductors, investigating quantum information systems, applying neutrons to condensed-matter and nuclear physics research, developing large-scale modeling and simulations to understand complex phenomena, and exploring nanoscience that bridges the atomic to macroscopic scales. In this presentation, I will highlight some of these post-cold war science and technology advances including our national security contributions, and discuss some of challenges for Los Alamos in the future.

Investigating the application of AOP methodology in development of Financial Accounting Software using Eclipse-AJDT Environment

NASA Astrophysics Data System (ADS)

Sharma, Amita; Sarangdevot, S. S.

2010-11-01

Aspect-Oriented Programming (AOP) methodology has been investigated in development of real world business application software—Financial Accounting Software. Eclipse-AJDT environment has been used as open source enhanced IDE support for programming in AOP language—Aspect J. Crosscutting concerns have been identified and modularized as aspects. This reduces the complexity of the design considerably due to elimination of code scattering and tangling. Improvement in modularity, quality and performance is achieved. The study concludes that AOP methodology in Eclipse-AJDT environment offers powerful support for modular design and implementation of real world quality business software.

Systems change resulting from HIV/AIDS education and training. A cross-cutting evaluation of nine innovative projects.

PubMed

Henderson, H; German, V F; Panter, A T; Huba, G J; Rohweder, C; Zalumas, J; Wolfe, L; Uldall, K K; Lalonde, B; Henderson, R; Driscoll, M; Martin, S; Duggan, S; Rahimian, A; Melchior, L A

1999-12-01

An evaluation of nine diverse HIV/AIDS training programs assessed the degree to which the programs produced changes in the ways that health care systems deliver HIV/AIDS care. Participants were interviewed an average of 8 months following completion of training and asked for specific examples of a resulting change in their health care system. More than half of the trainees gave at least one example of a systems change. The examples included the way patient referrals are made, the manner in which agency collaborations are organized, and the way care is delivered.

Intelligent transportation systems for planned special events : a cross-cutting study

DOT National Transportation Integrated Search

2008-11-01

This cross-cutting study examines how six agencies in five states used and continue to use ITS to reduce congestion generated by planned special events, thereby reducing crashes, increasing travel time reliability, and reducing driver frustration.

Notification: CIGIE Purchase Card Cross-Cutting Project

EPA Pesticide Factsheets

Project #OA-FY17-0088, December 20, 2016. The EPA OIG plans to participate in a Council of the Inspectors General on Integrity and Efficiency (CIGIE) purchase card cross-cutting project led by the U.S. Department of Agriculture OIG.

5. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR VIEW OF CROSSCUT HYDRO PLANT, SHOWING 25 CYCLE GENERATING UNITS FOREGROUND AND 60 CYCLE GENERATING UNIT REAR Photographer unknown, no date - Cross Cut Hydro Plant, North Side of Salt River, Tempe, Maricopa County, AZ

Cross-Cutting public policy requirements applicable to federal grants

EPA Pesticide Factsheets

There are cross-cutting public policy requirements applicable to Federal grants, including those awarded by the EPA. Some of those requirements are included here because they have been part of appropriations acts for several years without change.

Traffic signal preemption for emergency vehicles : a cross-cutting study : putting the "first" in "first response"

DOT National Transportation Integrated Search

2006-01-01

This cross-cutting study identifies issues associated with emergency vehicle operations and emergency vehicle preemption. This study reports information gathered during a review of publications and site visits to three jurisdictions operating emergen...

Developing a regional ITS architecture : a cross-cutting study : building a framework for regional ITS integration

DOT National Transportation Integrated Search

1999-09-01

This report highlights cross-cutting findings and perspectives gleaned from a series of case studies that examined the development processes of regional and statewide Intelligent Transportation Systems (ITS) architectures. Each of the case studies is...

Using Innovative Resources and Programs to Prepare Pre- and In-Service Teachers for New Science Standards

NASA Astrophysics Data System (ADS)

Kinzler, R. J.; Short, J.; Contino, J.; Cooke-Nieves, N.; Howes, E.; Kravitz, D.; Randle, D.; Trowbridge, C.

2014-12-01

Leveraging the Rose Center for Earth and Space and active research departments in Earth and Planetary Science, Astrophysics, and Paleontology, the Education Department at the American Museum of Natural History (AMNH) offers an MAT program to prepare new Earth Science teachers (~100 new teachers by 2018) as well as a range of professional development (PD) opportunities for over 3,000 K-12 teachers annually, providing opportunities to learn with scientists; inquiry-based experiences; and standards-aligned resources. The AMNH produces innovative geoscience and other STEM resources supporting teacher and student science investigations with data visualizations and analysis tools, teaching case materials and other resources that provide rich nonfiction reading and writing opportunities for use in Earth and space science curricula that are integrated in the MAT and PD programs. Museum resources and the MAT and PD programs are aligned to support the recently released Next Generation Science Standards (NGSS) and the Common Core State Standards. The NGSS is a set of science and engineering practices, crosscutting concepts and disciplinary core ideas to help cultivate teachers' and K-12 students' scientific habits of mind, develop their knowledge and abilities to engage in scientific investigations, and teach them how to reason in context; goals that closely align with those of the AMNH's teacher preparation and professional development programs. A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas (NRC, 2012) is a required text for the MAT program, and this text as well as the NGSS Performance Expectations guide the PD programs as well. Researchers working with Museum scientists and educators find it is not enough for programs for pre- and in-service teachers to provide access to resources. Research suggests that these programs need to engage pre- and in-service teachers in using and reflecting on these types of resources, as well as take into account school environments and support for pre- and in-service teachers with different levels of knowledge and teaching expertise. Evaluation findings from AMNH programs indicate pre- and in-service teachers deepen their science content knowledge and develop new ways of supporting inquiry-based learning and teaching.

Partnerships form the basis for implementing a National Space Weather Plan

NASA Astrophysics Data System (ADS)

Spann, James F.; Giles, Barbara L.

2017-08-01

The 2017 Space Weather Enterprise Forum, held June 27, focused on the vital role of partnerships in order to establish an effective and successful national space weather program. Experts and users from the many government agencies, industry, academia, and policy makers gathered to discuss space weather impacts and mitigation strategies, the relevant services and supporting infrastructure, and the vital role cross-cutting partnerships must play for successful implementation of the National Space Weather Action Plan.

Cross-Cutting Risk Framework: Mining Data for Common Risks Across the Portfolio

NASA Technical Reports Server (NTRS)

Klein, Gerald A., Jr.; Ruark, Valerie

2017-01-01

The National Aeronautics and Space Administration (NASA) defines risk management as an integrated framework, combining risk-informed decision making and continuous risk management to foster forward-thinking and decision making from an integrated risk perspective. Therefore, decision makers must have access to risks outside of their own project to gain the knowledge that provides the integrated risk perspective. Through the Goddard Space Flight Center (GSFC) Flight Projects Directorate (FPD) Business Change Initiative (BCI), risks were integrated into one repository to facilitate access to risk data between projects. With the centralized repository, communications between the FPD, project managers, and risk managers improved and GSFC created the cross-cutting risk framework (CCRF) team. The creation of the consolidated risk repository, in parallel with the initiation of monthly FPD risk managers and risk governance board meetings, are now providing a complete risk management picture spanning the entire directorate. This paper will describe the challenges, methodologies, tools, and techniques used to develop the CCRF, and the lessons learned as the team collectively worked to identify risks that FPD programs projects had in common, both past and present.

Effect of Anticipation on Lower Extremity Biomechanics During Side- and Cross-Cutting Maneuvers in Young Soccer Players.

PubMed

Kim, Jin Hyun; Lee, Ki-Kwang; Kong, Se Jin; An, Keun Ok; Jeong, Jin Hwa; Lee, Yong Seuk

2014-08-01

Less mature athletes exhibit biomechanical parameters during cutting maneuvers that may place these athletes at greater risk for injury than their more mature counterparts, especially if the maneuvers are unanticipated. However, most studies on risk factors for anterior cruciate ligament (ACL) injury have focused on neuromuscular and knee kinematic differences between the sexes, not on the biomechanical parameters between specific sporting maneuvers. (1) Anticipation will have a greater effect than the type of cutting maneuver (side- vs cross-cutting) in terms of the biomechanical risk factors for ACL injuries, and (2) the biomechanical risk factors will be different between the 2 types of maneuvers. Controlled laboratory study. Thirty-seven young, male middle school soccer players participated in this study. Three-dimensional motion analysis featuring ground-reaction force and electromyography of the right leg was used. Kinematics, kinetics, and electromyography data for each athlete were analyzed during anticipated and unanticipated side- and cross-cutting maneuvers. The differences between anticipated and unanticipated states as well as between side- and cross-cutting maneuvers were calculated and compared. After unanticipated side-cutting, the time to peak ground-reaction force was longer and peak values were smaller compared with anticipated side-cutting. Flexion, valgus, and internal rotations in the knee joint were larger, and greater flexion and valgus moments were observed. The vastus lateralis and vastus medialis showed lower activity, and the lateral gastrocnemius showed higher activity after unanticipated side-cutting maneuvers. With unanticipated cross-cutting, the time to peak ground-reaction force was longer and peak values were smaller compared with anticipated cross-cutting, and the lateral gastrocnemius showed higher activity. Differences in the peak values of the mediolateral and vertical forces were smaller in the cross-cutting maneuver than in side-cutting. Changes in flexion and adduction of the hip joint, flexion of the knee joint, and inversion of the ankle joint were larger during side-cutting. Although there were some interactions between direction and anticipation, anticipating a cutting maneuver generally had a greater effect than the type of maneuver when there was no significant interaction. Increases in the valgus angle and moment of the knee joint and higher lateral gastrocnemius activity during the late period showed an association with ACL injury risk factors during side-cutting, and higher lateral gastrocnemius activity during the early period showed an association with injury risk factors during cross-cutting. © 2014 The Author(s).

Increasing participation in prevention research: strategies for youths, parents, and schools.

PubMed

Hooven, Carole; Walsh, Elaine; Willgerodt, Mayumi; Salazar, Amy

2011-08-01

Subject participation is a critical concern for clinicians and researchers involved in prevention programs, especially for intensive interventions that require randomized assignment and lengthy youth and parent involvement. This article describes details of an integrated approach used to recruit and retain at-risk high school youths, their parents, and high schools to two different comprehensive, "indicated" prevention programs. Parent and youth recruitment and retention data for the two studies is provided in support of the approach described. A coordinated, multilevel approach, organized around cross-cutting issues, is described in detail as a response to the challenges of including vulnerable populations in intervention research. Methods are relevant to nurse clinicians who deliver prevention programs, and are important to clinical research that relies upon adequate participation in research programs. © 2011 Wiley Periodicals, Inc.

Annual Cybersecurity & Resilience Workshop | Energy Systems Integration

Science.gov Websites

architecture for DER. Cross-Cutting Panels and Breakout Sessions Workshop attendees participated in three cross , business, and policy perspective. The below videos showcase one of the three cross-cutting panel Architecture: Toward a Buildable Architecture Supporting Fractal Microgrids Toby Considine, President, TC9 Inc

Measurement of RF propagation around corners in underground mines and tunnels

PubMed Central

Jacksha, R.; Zhou, C.

2017-01-01

This paper reports measurement results for radio frequency (RF) propagation around 90° corners in tunnels and underground mines, for vertically, horizontally and longitudinally polarized signals. Measurements of signal power attenuation from a main entry into a crosscut were performed at four frequencies — 455, 915, 2450 and 5800 MHz — that are common to underground radio communication systems. From the measurement data, signal power loss was determined as a function of signal coupling from the main entry into the crosscut. The resultant power loss data show there are many factors that contribute to power attenuation from a main entry into a crosscut, including frequency, antenna polarization and cross-sectional entry dimensions. PMID:28626351

Measurement of RF propagation around corners in underground mines and tunnels.

PubMed

Jacksha, R; Zhou, C

2016-01-01

This paper reports measurement results for radio frequency (RF) propagation around 90° corners in tunnels and underground mines, for vertically, horizontally and longitudinally polarized signals. Measurements of signal power attenuation from a main entry into a crosscut were performed at four frequencies - 455, 915, 2450 and 5800 MHz - that are common to underground radio communication systems. From the measurement data, signal power loss was determined as a function of signal coupling from the main entry into the crosscut. The resultant power loss data show there are many factors that contribute to power attenuation from a main entry into a crosscut, including frequency, antenna polarization and cross-sectional entry dimensions.

Women and the Crossroads of Science: Thoughts on Policy, Research, and Evaluation

NASA Astrophysics Data System (ADS)

Dietz, James S.; Anderson, Bernice; Katzenmeyer, Conrad

In this essay, the authors examine the crosscutting themes of this special issue as they pertain to policy, research, and evaluation of women and science. Past and current research, theory, frameworks, and programs are discussed in the context of challenges and innovations for methods and policy. The authors assert that the crossroads for gender equity studies lies at the intersection of science and society and argue for the need to build a base of cumulative knowledge for policy and practice.

Pulsed Power Science and Technology: A Strategic Outlook for the National Nuclear Security Administration (Summary)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sinars, Daniel; Scott, Kimberly Carole; Edwards, M. John

Major advances in pulsed power technology and applications over the last twenty years have expanded the mission areas for pulsed power and created compelling new opportunities for the Stockpile Stewardship Program (SSP). This summary document is a forward look at the development of pulsed power science and technology (PPS&T) capabilities in support of the next 20 years of the SSP. This outlook was developed during a three-month-long tri-lab study on the future of PPS&T research and capabilities in support of applications to: (1) Dynamic Materials, (2) Thermonuclear Burn Physics and Inertial Confinement Fusion (ICF), and (3) Radiation Effects and Nuclearmore » Survivability. It also considers necessary associated developments in next-generation codes and pulsed power technology as well as opportunities for academic, industry, and international engagement. The document identifies both imperatives and opportunities to address future SSP mission needs. This study was commissioned by the National Nuclear Security Administration (NNSA). A copy of the memo request is contained in the Appendix. NNSA guidance received during this study explicitly directed that it not be constrained by resource limitations and not attempt to prioritize its findings against plans and priorities in other areas of the national weapons program. That prioritization, including the relative balance amongst the three focus areas themselves, must of course occur before any action is taken on the observations presented herein. This unclassified summary document presents the principal imperatives and opportunities identified in each mission and supporting area during this study. Preceding this area-specific outlook, we discuss a cross-cutting opportunity to increase the shot capacity on the Z pulsed power facility as a near-term, cost-effective way to broadly impact PPS&T for SSP as well as advancing the science and technology to inform future SSMP milestones over the next 5-10 years. The final page of the summary presents two timelines that couch the opportunities discussed here in terms of the broader strategic timelines encapsulated in the fiscal year 2017 Stockpile Stewardship Management Plan (SSMP).« less

Deep Understanding of Electromagnetism Using Crosscutting Concepts

ERIC Educational Resources Information Center

De Poorter, John; De Lange, Jan; Devoldere, Lies; Van Landeghem, Jouri; Strubbe, Katrien

2017-01-01

Crosscutting concepts like patterns and models are fundamental parts in both the American framework of science education (from the AAAS) and our proposals for a new science education framework in Flanders. These concepts deepen the insight of both students and teachers. They help students to ask relevant questions during an inquiry and they give…

The Second Dimension--Crosscutting Concepts

ERIC Educational Resources Information Center

Duschl, Richard A.

2012-01-01

The recently published National Research Council (NRC) report "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011) offers a thoughtful research-based agenda that helps guide teachers in making the shift to a doing-led agenda in K-12 science education. In the December 2011 editions of the NSTA…

76 FR 55364 - Request for Information: Technical Inputs and Assessment Capacity Related to Regional, Sectoral...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-07

..., and Cross-Cutting Assessments for the 2013 U.S. National Climate Assessment (NCA) Report and the... Climate Assessment (NCA) regional, sectoral, and cross-cutting topics proposed for the 2013 NCA report and... report outline, and information about the National Climate Assessment Development and Advisory Committee...

RECOVERY ACT: MULTIMODAL IMAGING FOR SOLAR CELL MICROCRACK DETECTION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Janice Hudgings; Lawrence Domash

2012-02-08

Undetected microcracks in solar cells are a principal cause of failure in service due to subsequent weather exposure, mechanical flexing or diurnal temperature cycles. Existing methods have not been able to detect cracks early enough in the production cycle to prevent inadvertent shipment to customers. This program, sponsored under the DOE Photovoltaic Supply Chain and Cross-Cutting Technologies program, studied the feasibility of quantifying surface micro-discontinuities by use of a novel technique, thermoreflectance imaging, to detect surface temperature gradients with very high spatial resolution, in combination with a suite of conventional imaging methods such as electroluminescence. The project carried out laboratorymore » tests together with computational image analyses using sample solar cells with known defects supplied by industry sources or DOE National Labs. Quantitative comparisons between the effectiveness of the new technique and conventional methods were determined in terms of the smallest detectable crack. Also the robustness of the new technique for reliable microcrack detection was determined at various stages of processing such as before and after antireflectance treatments. An overall assessment is that the new technique compares favorably with existing methods such as lock-in thermography or ultrasonics. The project was 100% completed in Sept, 2010. A detailed report of key findings from this program was published as: Q.Zhou, X.Hu, K.Al-Hemyari, K.McCarthy, L.Domash and J.Hudgings, High spatial resolution characterization of silicon solar cells using thermoreflectance imaging, J. Appl. Phys, 110, 053108 (2011).« less

Accelerated development of Zr-containing new generation ferritic steels for advanced nuclear reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Lizhen; Yang, Ying; Sridharan, K.

2015-12-01

The mission of the Nuclear Energy Enabling Technologies (NEET) program is to develop crosscutting technologies for nuclear energy applications. Advanced structural materials with superior performance at elevated temperatures are always desired for nuclear reactors, which can improve reactor economics, safety margins, and design flexibility. They benefit not only new reactors, including advanced light water reactors (LWRs) and fast reactors such as the sodium-cooled fast reactor (SFR) that is primarily designed for management of high-level wastes, but also life extension of the existing fleet when component exchange is needed. Developing and utilizing the modern materials science tools (experimental, theoretical, and computationalmore » tools) is an important path to more efficient alloy development and process optimization. The ultimate goal of this project is, with the aid of computational modeling tools, to accelerate the development of Zr-bearing ferritic alloys that can be fabricated using conventional steelmaking methods. The new alloys are expected to have superior high-temperature creep performance and excellent radiation resistance as compared to Grade 91. The designed alloys were fabricated using arc-melting and drop-casting, followed by hot rolling and conventional heat treatments. Comprehensive experimental studies have been conducted on the developed alloys to evaluate their hardness, tensile properties, creep resistance, Charpy impact toughness, and aging resistance, as well as resistance to proton and heavy ion (Fe 2+) irradiation.« less

EBF3 Design and Sustainability Considerations

NASA Technical Reports Server (NTRS)

Taminger, Karen M. B.

2015-01-01

Electron beam freeform fabrication (EBF3) is a cross-cutting technology for producing structural metal parts using an electron beam and wire feed in a layer-additive fashion. This process was developed by researchers at NASA Langley to specifically address needs for aerospace applications. Additive manufacturing technologies like EBF3 enable efficient design of materials and structures by tailoring microstructures and chemistries at the local level to improve performance at the global level. Additive manufacturing also facilitates design freedom by integrating assemblies into complex single-piece components, eliminating flanges, fasteners and joints, resulting in reduced size and mass. These same efficiencies that permit new design paradigms also lend themselves to supportability and sustainability. Long duration space missions will require a high degree of self-sustainability. EBF3 is a candidate technology being developed to allow astronauts to conduct repairs and fabricate new components and tools on demand, with efficient use of feedstock materials and energy.

Using a Simulation to Illustrate Crosscutting Concepts through a Disease Model

ERIC Educational Resources Information Center

Bokor, Julie; Darwiche, Houda; Joseph, Drew

2015-01-01

Using Pompe disease as a context affords the opportunity for students to consider multiple biological concepts and embraces the Next Generation Science Standards Disciplinary Core Ideas Structure and Function (LS1.A) and Inheritance of Traits (LS3.A) as well as Crosscutting Concepts Structure and Function and Cause and Effect. These crosscutting…

24. VIEW SHOWING WASTE GATES ON GRAND CANAL AT JUNCTION ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

24. VIEW SHOWING WASTE GATES ON GRAND CANAL AT JUNCTION WITH OLD CROSSCUT NE/4, Sec. 7, TIN, R4E; LOOKING WEST. OLD CROSSCUT CANAL ENTERS FROM RIGHT. WASTE GATE ON LEFT EMPTIES INTO SALT RIVER BED Photographer: Kevin Kreisel-Coons, May 1990 - Grand Canal, North side of Salt River, Tempe, Maricopa County, AZ

10. Photocopy of photograph (original in SRP Archives) Probably photographed ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

10. Photocopy of photograph (original in SRP Archives) Probably photographed by SRP, March 15, 1941 INDIAN BEND WELL STRUCTURE FOR SUPPLYING WATER TO CROSSCUT DIESEL PLANT, NEAR PROPOSED LOCATION OF (INDIAN BEND) SETTLING POND. - Crosscut Steam Plant, Indian Bend Pond & Pump Ditch, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

30 CFR 75.524 - Electric face equipment; electric equipment used in return air outby the last open crosscut...

Code of Federal Regulations, 2010 CFR

2010-07-01

... current between frames of equipment. 75.524 Section 75.524 Mineral Resources MINE SAFETY AND HEALTH... the last open crosscut; maximum level of alternating or direct electric current between frames of equipment. The maximum level of alternating or direct electric current that exists between the frames of any...

Character-marked furniture: potential for lumber yield increase in crosscut-first rough mills

Treesearch

Urs Buehlmann; Janice K. Wiedenbeck; E. Earl Kline; E. Earl Kline

1999-01-01

Including character marks in dimension parts of the furniture, cabinet, and dimension industries offers an opportunity to increase lumber yield substantially. However, little quantitative knowledge exists as to how the incorporation of character marks in parts influences yield when processing lumber in a crosscut-first rough mill. Using computer simulation, this study...

30 CFR 75.524 - Electric face equipment; electric equipment used in return air outby the last open crosscut...

Code of Federal Regulations, 2011 CFR

2011-07-01

... the last open crosscut; maximum level of alternating or direct electric current between frames of equipment. The maximum level of alternating or direct electric current that exists between the frames of any... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electric face equipment; electric equipment...

30 CFR 75.524 - Electric face equipment; electric equipment used in return air outby the last open crosscut...

Code of Federal Regulations, 2014 CFR

2014-07-01

... the last open crosscut; maximum level of alternating or direct electric current between frames of equipment. The maximum level of alternating or direct electric current that exists between the frames of any... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electric face equipment; electric equipment...

30 CFR 75.524 - Electric face equipment; electric equipment used in return air outby the last open crosscut...

Code of Federal Regulations, 2013 CFR

2013-07-01

... the last open crosscut; maximum level of alternating or direct electric current between frames of equipment. The maximum level of alternating or direct electric current that exists between the frames of any... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electric face equipment; electric equipment...

30 CFR 75.524 - Electric face equipment; electric equipment used in return air outby the last open crosscut...

Code of Federal Regulations, 2012 CFR

2012-07-01

... the last open crosscut; maximum level of alternating or direct electric current between frames of equipment. The maximum level of alternating or direct electric current that exists between the frames of any... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electric face equipment; electric equipment...

Design and Analysis of Embedded I&C for a Fully Submerged Magnetically Suspended Impeller Pump

DOE PAGES

Melin, Alexander M.; Kisner, Roger A.

2018-04-03

Improving nuclear reactor power system designs and fuel-processing technologies for safer and more efficient operation requires the development of new component designs. In particular, many of the advanced reactor designs such as the molten salt reactors and high-temperature gas-cooled reactors have operating environments beyond the capability of most currently available commercial components. To address this gap, new cross-cutting technologies need to be developed that will enable design, fabrication, and reliable operation of new classes of reactor components. The Advanced Sensor Initiative of the Nuclear Energy Enabling Technologies initiative is investigating advanced sensor and control designs that are capable of operatingmore » in these extreme environments. Under this initiative, Oak Ridge National Laboratory (ORNL) has been developing embedded instrumentation and control (I&C) for extreme environments. To develop, test, and validate these new sensing and control techniques, ORNL is building a pump test bed that utilizes submerged magnetic bearings to levitate the shaft. The eventual goal is to apply these techniques to a high-temperature (700°C) canned rotor pump that utilizes active magnetic bearings to eliminate the need for mechanical bearings and seals. The technologies will benefit the Next Generation Power Plant, Advanced Reactor Concepts, and Small Modular Reactor programs. In this paper, we will detail the design and analysis of the embedded I&C test bed with submerged magnetic bearings, focusing on the interplay between the different major systems. Then we will analyze the forces on the shaft and their role in the magnetic bearing design. Next, we will develop the radial and thrust bearing geometries needed to meet the operational requirements of the test bed. In conclusion, we will present some initial system identification results to validate the theoretical models of the test bed dynamics.« less

Design and Analysis of Embedded I&C for a Fully Submerged Magnetically Suspended Impeller Pump

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melin, Alexander M.; Kisner, Roger A.

Improving nuclear reactor power system designs and fuel-processing technologies for safer and more efficient operation requires the development of new component designs. In particular, many of the advanced reactor designs such as the molten salt reactors and high-temperature gas-cooled reactors have operating environments beyond the capability of most currently available commercial components. To address this gap, new cross-cutting technologies need to be developed that will enable design, fabrication, and reliable operation of new classes of reactor components. The Advanced Sensor Initiative of the Nuclear Energy Enabling Technologies initiative is investigating advanced sensor and control designs that are capable of operatingmore » in these extreme environments. Under this initiative, Oak Ridge National Laboratory (ORNL) has been developing embedded instrumentation and control (I&C) for extreme environments. To develop, test, and validate these new sensing and control techniques, ORNL is building a pump test bed that utilizes submerged magnetic bearings to levitate the shaft. The eventual goal is to apply these techniques to a high-temperature (700°C) canned rotor pump that utilizes active magnetic bearings to eliminate the need for mechanical bearings and seals. The technologies will benefit the Next Generation Power Plant, Advanced Reactor Concepts, and Small Modular Reactor programs. In this paper, we will detail the design and analysis of the embedded I&C test bed with submerged magnetic bearings, focusing on the interplay between the different major systems. Then we will analyze the forces on the shaft and their role in the magnetic bearing design. Next, we will develop the radial and thrust bearing geometries needed to meet the operational requirements of the test bed. In conclusion, we will present some initial system identification results to validate the theoretical models of the test bed dynamics.« less

Agriscience Teachers' Implementation of Digital Game-based Learning in an Introductory Animal Science Course

NASA Astrophysics Data System (ADS)

Webb, Angela W.; Bunch, J. C.; Wallace, Maria F. G.

2015-12-01

In today's technological age, visions for technology integration in the classroom continue to be explored and examined. Digital game-based learning is one way to purposefully integrate technology while maintaining a focus on learning objectives. This case study sought to understand agriscience teachers' experiences implementing digital game-based learning in an introductory animal science course. From interviews with agriscience teachers on their experiences with the game, three themes emerged: (1) the constraints of inadequate and inappropriate technologies, and time to game implementation; (2) the shift in teacher and student roles necessitated by implementing the game; and (3) the inherent competitive nature of learning through the game. Based on these findings, we recommend that pre-service and in-service professional development opportunities be developed for teachers to learn how to implement digital game-based learning effectively. Additionally, with the potential for simulations that address cross-cutting concepts in the next generation science standards, digital game-based learning should be explored in various science teaching and learning contexts.

The Hands-On Optics Project: a demonstration of module 3-magnificent magnifications

NASA Astrophysics Data System (ADS)

Pompea, Stephen M.; Sparks, Robert T.; Walker, Constance E.

2014-07-01

The Hands-On Optics project offers an example of a set of instructional modules that foster active prolonged engagement. Developed by SPIE, OSA, and NOAO through funding from the U.S. National Science Foundation, the modules were originally designed for afterschool settings and museums. However, because they were based on national standards in mathematics, science, and technology, they were easily adapted for use in classrooms. The philosophy and implementation strategies of the six modules will be described as well as lessons learned in training educators. The modules were implementing with the help of optics industry professionals who served as expert volunteers to assist educators. A key element of the modules was that they were developed around an understanding of optics misconceptions and used culminating activities in each module as a form of authentic assessment. Thus student achievement could be measured by evaluating the actual product created by each student in applying key concepts, tools, and applications together at the end of each module. The program used a progression of disciplinary core concepts to build an integrated sequence and crosscutting ideas and practices to infuse the principles of the modern electro-optical field into the modules. Whenever possible, students were encouraged to experiment and to create, and to pursue inquiry-based approaches. The result was a program that had high appeal to regular as well as gifted students.

Estimating force and power requirements for crosscut shearing of roundwood.

Treesearch

Rodger A. Arola

1972-01-01

Presents a procedure which, through the use of nomographs, permits rapid estimation of the force required to crosscut shear logs of various species and diameters with shear blades ranging in thickness from 1/4 to 7/8 inch. In addition, nomographs are included to evaluate hydraulic cylinder sizes, pump capacities, and motor horsepower requirements to effect the cut....

30 CFR 75.507-1 - Electric equipment other than power-connection points; outby the last open crosscut; return air...

Code of Federal Regulations, 2011 CFR

2011-07-01

... where nonpermissible electric face equipment may be taken into or used inby the last open crosscut until March 30, 1974, such nonpermissible electric face equipment may be used in return air outby the last... where a permit for noncompliance is in effect, nonpermissible electric face equipment specified in such...

30 CFR 75.507-1 - Electric equipment other than power-connection points; outby the last open crosscut; return air...

Code of Federal Regulations, 2013 CFR

2013-07-01

... where nonpermissible electric face equipment may be taken into or used inby the last open crosscut until March 30, 1974, such nonpermissible electric face equipment may be used in return air outby the last... where a permit for noncompliance is in effect, nonpermissible electric face equipment specified in such...

Scientific retreats with 'speed dating': networking to stimulate new interdisciplinary translational research collaborations and team science.

PubMed

Ranwala, Damayanthi; Alberg, Anthony J; Brady, Kathleen T; Obeid, Jihad S; Davis, Randal; Halushka, Perry V

2017-02-01

To stimulate the formation of new interdisciplinary translational research teams and innovative pilot projects, the South Carolina Clinical and Translational Research (SCTR) Institute (South Carolina Clinical and Translational Science Award, CTSA) initiated biannual scientific retreats with 'speed dating' networking sessions. Retreat themes were prioritized based on the following criteria; cross-cutting topic, unmet medical need, generation of novel technologies and methodologies. Each retreat begins with an external keynote speaker followed by a series of brief research presentations by local researchers focused on the retreat theme, articulating potential areas for new collaborations. After each session of presentations, there is a 30 min scientific 'speed dating' period during which the presenters meet with interested attendees to exchange ideas and discuss collaborations. Retreat attendees are eligible to compete for pilot project funds on the topic of the retreat theme. The 10 retreats held have had a total of 1004 participants, resulted in 61 pilot projects with new interdisciplinary teams, and 14 funded projects. The retreat format has been a successful mechanism to stimulate novel interdisciplinary research teams and innovative translational research projects. Future retreats will continue to target topics of cross-cutting importance to biomedical and public health research. Copyright © 2016 American Federation for Medical Research.

Scientific Retreats with ‘Speed Dating’: Networking to Stimulate New Interdisciplinary Translational Research Collaborations and Team Science

PubMed Central

Alberg, Anthony J.; Brady, Kathleen T.; Obeid, Jihad S.; Davis, Randal; Halushka, Perry V.

2016-01-01

To stimulate the formation of new interdisciplinary translational research teams and innovative pilot projects, the South Carolina Clinical & Translational Research (SCTR) Institute (South Carolina Clinical and Translational Science Award, CTSA) initiated biannual scientific retreats with “speed dating” networking sessions. Retreat themes were prioritized based on the following criteria; cross-cutting topic, unmet medical need, generation of novel technologies and methodologies. Each retreat commences with an external keynote speaker followed by a series of brief research presentations by local researchers focused on the retreat theme, articulating potential areas for new collaborations. After each session of presentations, there is a 30 minute scientific “speed dating” period during which the presenters meet with interested attendees to exchange ideas and discuss collaborations. Retreat attendees are eligible to compete for pilot project funds on the topic of the retreat theme. The 10 retreats held have had a total of 1004 participants, resulted in 61 pilot projects with new interdisciplinary teams, and 14 funded projects. The retreat format has been a successful mechanism to stimulate novel interdisciplinary research teams and innovative translational research projects. Future retreats will continue to target topics of cross-cutting importance to biomedical and public health research. PMID:27807146

NGSS and the Next Generation of Science Teachers

NASA Astrophysics Data System (ADS)

Bybee, Rodger W.

2014-03-01

This article centers on the Next Generation Science Standards (NGSS) and their implications for teacher development, particularly at the undergraduate level. After an introduction to NGSS and the influence of standards in the educational system, the article addresses specific educational shifts—interconnecting science and engineering practices, disciplinary core ideas, crosscutting concepts; recognizing learning progressions; including engineering; addressing the nature of science, coordinating with Common Core State Standards. The article continues with a general discussion of reforming teacher education programs and a concluding discussion of basic competencies and personal qualities of effective science teachers.

What Does Three-Dimensional Teaching and Learning Look Like?: Examining the Potential for Crosscutting Concepts to Support the Development of Science Knowledge

ERIC Educational Resources Information Center

Fick, Sarah J.

2018-01-01

Science education reforms focus on the integration of three dimensions: disciplinary core ideas (DCIs), scientific and engineering practices (SEPs), and crosscutting concepts (CCCs). While research has examined the role of DCIs and SEPs in teaching and learning, little research has explored how the CCCs might be integrated. This research proposes…

Evaluation of Online Teacher and Student Materials for the Framework for K-12 Science Education Science and Engineering Crosscutting Concepts

ERIC Educational Resources Information Center

Schwab, Patrick

2013-01-01

The National Research Council developed and published the "Framework for K-12 Science Education," a new set of concepts that many states were planning on adopting. Part of this new endeavor included a set of science and engineering crosscutting concepts to be incorporated into science materials and activities, a first in science…

Factors affecting secondary science teachers' appraisal and adoption of technology-rich project-based learning environments

NASA Astrophysics Data System (ADS)

Luehmann, April Lynn

We are learning much about how to design project-based curriculum that leverages technology, but we know less about the everyday needs of teachers and the implicit and explicit factors that influence their curriculum adoption decisions. Given that teachers are the gatekeepers of their classrooms, it is essential that designers and reformers understand the criteria teachers use to support their judgments regarding the appraisal and adoption of innovative curricula if they wish to see widespread use of their designs. Toward this end, this dissertation examines the perceptions of teachers as they appraise and consider the adoption of one innovative, technology-rich, project-based curriculum. Thirty secondary science teachers in Indiana were recruited. This study took place in two phases. During the first phase, data consisted of teachers' comments in the form of "think aloud's" and observations as teachers interacted with an Internet-based science program: Web-Based Inquiry Science Environment. Through an examination of these data, six implicit factors were identified: Trust, Identity, Self-Efficacy, Process Goals, Situational Constraints, and Contextual Idiosyncrasies. Examination of the content related to these categories suggests that curricular adoption is not simply an academic process but is also a personal one. Also, trust between the teacher and both the change facilitator and the innovation plays an influential role. Data collected during the second phase included item analysis of factors that emerged during semi structured interviews and rated by the teachers in terms of their importance in influencing their adoption of the WISE-water quality program. Teacher identified factors were collapsed into 26 explicit factors and analyzed using cluster analysis, resulting in five clusters of teacher profiles: Logistically Focused, Subject-Matter Focused, Scaffolded Optimists, Accountability Focused, and Pedagogically Savvy. This study reveals that factors affecting teachers' decision-making processes extend beyond those of which they are consciously aware. Additionally, there is no one set of factors important to all teachers. Instead, different groups of teachers have different concerns and therefore different needs. A central contribution of this study is the identification of cross-cutting concerns. Additionally, this study provides practical implications for both designers and change agents interested in facilitating technology-infused curricular innovations.

Validation of hindi translation of DSM-5 level 1 cross-cutting symptom measure.

PubMed

Goel, Ankit; Kataria, Dinesh

2018-04-01

The DSM-5 Level 1 Cross-Cutting Symptom Measure is a self- or informant-rated measure that assesses mental health domains which are important across psychiatric diagnoses. The absence of this self- or informant-administered instrument in Hindi, which is a major language in India, is an important limitation in using this scale. To translate the English version of the DSM-5 Level 1 Cross-Cutting Symptom Measure to Hindi and evaluate its psychometric properties. The study was conducted at a tertiary care hospital in Delhi. The DSM-5 Level 1 Cross-Cutting Symptom Measure was translated into Hindi using the World Health Organization's translation methodology. Mean and standard deviation were evaluated for continuous variables while for categorical variables frequency and percentages were calculated. The translated version was evaluated for cross-language equivalence, test-retest reliability, internal consistency, and split half reliability. Hindi version was found to have good cross-language equivalence and test-retest reliability at the level of items and domains. Twenty two of the 23 items and all the 23 items had a significant correlation (ρ < 0.001) in cross language concordance and test-retest reliability data, respectively. The Cronbach's alpha was 0.95, and the Spearman-Brown Sphericity value was 0.79 for the Hindi version. The present study shows that cross-language concordance, internal consistency, split-half reliability, and test-retest reliability of the Hindi version of the measure are excellent. Thus, the Hindi version of DSM-5 Level 1 Cross-Cutting Symptom Measure as translated in this study is a valid instrument. Copyright © 2018 Elsevier B.V. All rights reserved.

Issues in NASA Program and Project Management. Special Edition: A Collection of Papers on NASA Procedures and Guidance 7120.5A. Volume 14

NASA Technical Reports Server (NTRS)

Hoffman, Edward J. (Editor); Lawbaugh, William M. (Editor)

1998-01-01

A key aspect of NASA's new Strategic Management System is improving the way we plan, approve, execute and evaluate our programs and projects. To this end, NASA has developed the NASA Program and Project Management processes and Requirements-NASA Procedures and Guidelines (NPG) 7120.5A, which formally documents the "Provide Aerospace Products and Capabilities" crosscutting process, and defines the processes and requirements that are responsive to the Program/Project Management-NPD 7120.4A. The Program/Project Management-NPD 7120.4A, issued November 14, 1996, provides the policy for managing programs and projects in a new way that is aligned with the new NASA environment. An Agencywide team has spent thousands of hours developing the NASA Program and Project Management Processes and Requirements-NPG 7120.5A. We have created significant flexibility, authority and discretion for the program and project managers to exercise and carry out their duties, and have delegated the responsibility and the accountability for their programs and projects.

The DSM-5 Self-Rated Level 1 Cross-Cutting Symptom Measure as a Screening Tool.

PubMed

Bastiaens, Leo; Galus, James

2018-03-01

The DSM-5 Self-Rated Level 1 Cross-Cutting Symptom Measure was developed to aid clinicians with a dimensional assessment of psychopathology; however, this measure resembles a screening tool for several symptomatic domains. The objective of the current study was to examine the basic parameters of sensitivity, specificity, positive and negative predictive power of the measure as a screening tool. One hundred and fifty patients in a correctional community center filled out the measure prior to a psychiatric evaluation, including the Mini International Neuropsychiatric Interview screen. The above parameters were calculated for the domains of depression, mania, anxiety, and psychosis. The results showed that the sensitivity and positive predictive power of the studied domains was poor because of a high rate of false positive answers on the measure. However, when the lowest threshold on the Cross-Cutting Symptom Measure was used, the sensitivity of the anxiety and psychosis domains and the negative predictive values for mania, anxiety and psychosis were good. In conclusion, while it is foreseeable that some clinicians may use the DSM-5 Self-Rated Level 1 Cross-Cutting Symptom Measure as a screening tool, it should not be relied on to identify positive findings. It functioned well in the negative prediction of mania, anxiety and psychosis symptoms.

Innovations in Public Health Education: Promoting Professional Development and a Culture of Health

PubMed Central

Gentry, Daniel; Klesges, Lisa M.

2015-01-01

As the field of public health advances toward addressing complex, systemic problems, future public health professionals must be equipped with leadership and interprofessional skills that support collaboration and a culture of health. The University of Memphis School of Public Health has infused innovative strategies into graduate education via experiential learning opportunities to enhance leadership, collaboration, and professional development. Novel training programs such as Day One, Public Health Interdisciplinary Case Competition, and Memphis Healthy U support Association of Schools and Programs of Public Health cross-cutting competencies and prepare Master of Public Health and Master of Health Administration graduates to function effectively at the outset of their careers and become catalysts for creating a culture of health. PMID:25706016

Innovations in public health education: promoting professional development and a culture of health.

PubMed

Levy, Marian; Gentry, Daniel; Klesges, Lisa M

2015-03-01

As the field of public health advances toward addressing complex, systemic problems, future public health professionals must be equipped with leadership and interprofessional skills that support collaboration and a culture of health. The University of Memphis School of Public Health has infused innovative strategies into graduate education via experiential learning opportunities to enhance leadership, collaboration, and professional development. Novel training programs such as Day One, Public Health Interdisciplinary Case Competition, and Memphis Healthy U support Association of Schools and Programs of Public Health cross-cutting competencies and prepare Master of Public Health and Master of Health Administration graduates to function effectively at the outset of their careers and become catalysts for creating a culture of health.

Evaluating the Potential of NASA's Earth Science Research Results for Improving Future Operational Systems

NASA Astrophysics Data System (ADS)

Frederick, M. E.; Cox, E. L.; Friedl, L. A.

2006-12-01

NASA's Earth Science Theme is charged with implementing NASA Strategic Goal 3A to "study Earth from space to advance scientific understanding and meet societal needs." In the course of meeting this objective, NASA produces research results, such as scientific observatories, research models, advanced sensor and space system technology, data active archives and interoperability technology, high performance computing systems, and knowledge products. These research results have the potential to serve society beyond their intended purpose of answering pressing Earth system science questions. NASA's Applied Sciences Program systematically evaluates the potential of the portfolio of research results to serve society by conducting projects in partnership with regional/national scale operational partners with the statutory responsibility to inform decision makers. These projects address NASA's National Applications and the societal benefit areas under the IEOS and GEOSS. Prototyping methods are used in two ways in NASA's Applied Sciences Program. The first is part of the National Applications program element, referred to as Integrated Systems Solutions (ISS) projects. The approach for these projects is to use high fidelity prototypes to benchmark the assimilation of NASA research results into our partners' decision support systems. The outcome from ISS projects is a prototype system that has been rigorously tested with the partner to understand the scientific uncertainty and improved value of their modified system. In many cases, these completed prototypes are adopted or adapted for use by the operational partners. The second falls under the Crosscutting Solutions program element, referred to as Rapid Prototyping (RP) experiments. The approach for RP experiments is to use low fidelity prototypes that are low cost and quickly produced to evaluate the potential of the breadth of NASA research results to serve society. The outcome from the set of RP experiments is an evaluation of many and varied NASA research results for their potential to be candidates for further development as an ISS project. The intention is to seed the community with many creative ideas for projects that use "un-applied" NASA research results to serve society, such as simulations of future missions.

Overview of current capabilities and research and technology developments for planetary protection

NASA Astrophysics Data System (ADS)

Frick, Andreas; Mogul, Rakesh; Stabekis, Pericles; Conley, Catharine A.; Ehrenfreund, Pascale

2014-07-01

The pace of scientific exploration of our solar system provides ever-increasing insights into potentially habitable environments, and associated concerns for their contamination by Earth organisms. Biological and organic-chemical contamination has been extensively considered by the COSPAR Panel on Planetary Protection (PPP) and has resulted in the internationally recognized regulations to which spacefaring nations adhere, and which have been in place for 40 years. The only successful Mars lander missions with system-level “sterilization” were the Viking landers in the 1970s. Since then different cleanliness requirements have been applied to spacecraft based on their destination, mission type, and scientific objectives. The Planetary Protection Subcommittee of the NASA Advisory Council has noted that a strategic Research & Technology Development (R&TD) roadmap would be very beneficial to encourage the timely availability of effective tools and methodologies to implement planetary protection requirements. New research avenues in planetary protection for ambitious future exploration missions can best be served by developing an over-arching program that integrates capability-driven developments with mission-driven implementation efforts. This paper analyzes the current status concerning microbial reduction and cleaning methods, recontamination control and bio-barriers, operational analysis methods, and addresses concepts for human exploration. Crosscutting research and support activities are discussed and a rationale for a Strategic Planetary Protection R&TD Roadmap is outlined. Such a roadmap for planetary protection provides a forum for strategic planning and will help to enable the next phases of solar system exploration.

OOI CyberInfrastructure - Next Generation Oceanographic Research

NASA Astrophysics Data System (ADS)

Farcas, C.; Fox, P.; Arrott, M.; Farcas, E.; Klacansky, I.; Krueger, I.; Meisinger, M.; Orcutt, J.

2008-12-01

Software has become a key enabling technology for scientific discovery, observation, modeling, and exploitation of natural phenomena. New value emerges from the integration of individual subsystems into networked federations of capabilities exposed to the scientific community. Such data-intensive interoperability networks are crucial for future scientific collaborative research, as they open up new ways of fusing data from different sources and across various domains, and analysis on wide geographic areas. The recently established NSF OOI program, through its CyberInfrastructure component addresses this challenge by providing broad access from sensor networks for data acquisition up to computational grids for massive computations and binding infrastructure facilitating policy management and governance of the emerging system-of-scientific-systems. We provide insight into the integration core of this effort, namely, a hierarchic service-oriented architecture for a robust, performant, and maintainable implementation. We first discuss the relationship between data management and CI crosscutting concerns such as identity management, policy and governance, which define the organizational contexts for data access and usage. Next, we detail critical services including data ingestion, transformation, preservation, inventory, and presentation. To address interoperability issues between data represented in various formats we employ a semantic framework derived from the Earth System Grid technology, a canonical representation for scientific data based on DAP/OPeNDAP, and related data publishers such as ERDDAP. Finally, we briefly present the underlying transport based on a messaging infrastructure over the AMQP protocol, and the preservation based on a distributed file system through SDSC iRODS.

Aerospace Technology Innovation. Volume 10

NASA Technical Reports Server (NTRS)

Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

2002-01-01

Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

The impact of student diversity on interest, design, and promotion of Web-based tailored nutrition and physical activity programs for community colleges.

PubMed

Quintiliani, Lisa M; De Jesus, Maria; Wallington, Sherrie Flynt

2011-01-01

To examine an organizational level perspective of the process of adopting Web-based tailored nutrition and physical activity programs for community college students. In this qualitative study, 21 individual key informant interviews of community college student services and health center administrators were used to examine organizational-level perceptions of interest in, design characteristics of, and ways to promote health programs. A cross-classification matrix of a priori and emergent themes related to student diversity was created to describe cross-cutting patterns. Findings revealed 5 emergent themes for consideration in program development related to student diversity: (1) multiple roles played by students, (2) limited access to financial resources, (3) varied student demographics, (4) different levels of understanding, and (5) commuting to campus. Nutrition and physical activity programs for community colleges need to specifically address the diverse nature of their students to increase the potential of adoption. Copyright © 2011 Society for Nutrition Education. Published by Elsevier Inc. All rights reserved.

13. Photocopy of drawing (original in SRP Files and Reproductions) ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

13. Photocopy of drawing (original in SRP Files and Reproductions) SRP Engineering, September 1940 RIGHTS OF WAY OF GRAND CANAL AND INDIAN BEND PUMP AND WASTE DITCH, SHOWING LOCATIONS OF DIESEL PLANT, ORIGINAL CROSSCUT HYDRO POWER HOUSE, AND DIESEL PLANT WELL NEAR WHICH INDIAN BEND POND WOULD BE CONSTRUCTED. - Crosscut Steam Plant, Indian Bend Pond & Pump Ditch, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

Location of Opening-Out Cross-Cuts in Relation to Rockburst Hazard Conditions along the Face in the Light of Model Testing

NASA Astrophysics Data System (ADS)

Chlebowski, Dariusz; Zorychta, Andrzej; Burtan, Zbigniew; Cała, Marek

2017-03-01

The paper outlines the main objectives of the method used for assessment of rockburst hazard during longwall mining operations taking into account factors expressing the confined work conditions. Relying on analytical approach, the conditions are examined that are likely to trigger the rockburst occurrence along the face, with regards to the location of cross-cuts and taking into account the presence of past excavation and geological disorders in the overlying strata. Simulation data apply to three cases of model loading, representing the impacts of residual pillars, gobs surrounded by undisturbed blocks of coal and the presence of faults, whilst the procedure involves five possible locations of opening-out cross-cuts in relation to characteristic points in the model. Results are examined basing on variability patterns of stress concentration and energy density distribution in the proximity of the workface in the course of progressing mining operations.

SERVIR HIMALYA: Enabling Improved Environmental Management and Livelihoods in the HKH

NASA Astrophysics Data System (ADS)

Bajracharya, B.; Murthy, M. S. R.; Shrestha, B.

2014-11-01

With an overarching goal to improve environmental management and resilience to climate change, SERVIR-Himalaya is established as a collaborative initiative of USAID, NASA and ICIMOD. The SERVIR-Himalaya has been the key instrument to provide integrated and innovative geospatial solutions for generation and dissemination of information and knowledge resources on mountain environments. The SERVIR applications, products and services are viewed as essential cross-cutting elements to achieve the greater impacts on addressing Himalayan livelihood challenges. The broad thematic areas which are also subset of the societal benefit areas of Global Earth Observation (GEO), namely - agriculture and food security, ecosystems and sustainable landscapes, and disaster risk management are addressed. On the cross-cutting theme, SERVIR Himalaya is also focusing on developing regional level applications providing key information systems and services on multiple themes of regional significance. The regional level science applications include use of MODIS satellite information products and services for environmental and natural resources monitoring in the Himalayan region. Regional and national training and workshops, on-the-job training, internships and exchange programs and technical backstopping are key capacity building components to enhance the capacity of partners from national institutions in the regional member countries. These efforts are also seen as receiving feedback on the science applications, identify additional needs, and increase synergy by exploring opportunities for collaboration.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desroches, Louis-Benoit; Garbesi, Karina

It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standardsmore » program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The three primary analyses presented in this report are: Nevertheless, it is important to analyze best-on-market products, since data on truly max tech technologies are limited. (1) an analysis of the cross-cutting strategies most promising for reducing appliance and equipment energy use in the U.S.; (2) a macro-analysis of the U.S. energy-saving potential inherent in promising ultra-efficient appliance technologies; and (3) a product-level analysis of the energy-saving potential.« less

Physics-Based Design Tools for Lightweight Ceramic Composite Turbine Components with Durable Microstructures

NASA Technical Reports Server (NTRS)

DiCarlo, James A.

2011-01-01

Under the Supersonics Project of the NASA Fundamental Aeronautics Program, modeling and experimental efforts are underway to develop generic physics-based tools to better implement lightweight ceramic matrix composites into supersonic engine components and to assure sufficient durability for these components in the engine environment. These activities, which have a crosscutting aspect for other areas of the Fundamental Aero program, are focusing primarily on improving the multi-directional design strength and rupture strength of high-performance SiC/SiC composites by advanced fiber architecture design. This presentation discusses progress in tool development with particular focus on the use of 2.5D-woven architectures and state-of-the-art constituents for a generic un-cooled SiC/SiC low-pressure turbine blade.

Emerging Energy-efficiency and CO{sub 2} Emission-reduction Technologies for Cement and Concrete Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasanbeigi, Ali; Price, Lynn; Lin, Elina

2012-04-06

Globally, the cement industry accounts for approximately 5 percent of current anthropogenic carbon dioxide (CO{sub 2}) emissions. World cement demand and production are increasing significantly, leading to an increase in this industry's absolute energy use and CO{sub 2} emissions. Development of new energy-efficiency and CO{sub 2} emission-reduction technologies and their deployment in the market will be key for the cement industry's mid- and long-term climate change mitigation strategies. This report is an initial effort to compile available information on process description, energy savings, environmental and other benefits, costs, commercialization status, and references for emerging technologies to reduce the cement industry'smore » energy use and CO{sub 2} emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies for the cement industry that have already been commercialized, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on nineteen emerging technologies for the cement industry, with the goal of providing engineers, researchers, investors, cement companies, policy makers, and other interested parties with easy access to a well-structured database of information on these technologies.« less

Effect of rotary instrumentation on composite bond strength with simulated pulpal pressure.

PubMed

Gupta, Ruchi; Tewari, Sanjay

2006-01-01

This study evaluated the effect of cutting teeth with different types of burs at various speeds on shear bond strength using Prime and Bond NT (Dentsply/DeTrey). A simulated pulpal pressure of 25-mmHg, equivalent to 34 cmH2O, was created in a false pulpal chamber filled with distilled water and maintained for seven days. The human teeth were divided into six groups of 10 teeth each: fine grit straight fissure diamond bur in air rotor (DA), fine grit straight fissure diamond bur in micromotor (DM), crosscut fissure carbide bur in air rotor (CCA), crosscut fissure carbide bur in micromotor (CCM), plain fissure carbide bur in micromotor (CM) and #600-grit silicon carbide paper (SiC). The tooth surfaces in these groups were cut under copious air-water spray and treated with Prime and Bond NT after etching with 38% phosphoric acid. Composite restorations were then prepared with TPH spectrum (Dentsply/ DeTrey). After soaking in water at 37 degrees C for 24 hours, the specimens were loaded at a 45 degrees angle to their longitudinal axes by using a Z 010 Universal Testing Machine (Zwick), and shear bond strengths were determined at a crosshead speed of 2 mm/minute. All of the specimens were then observed under Stereomicroscope at 10x. Statistical analysis was made using one-way and two-way ANOVA and t-test (p < 0.05). The bond strengths achieved with a fine grit straight fissure diamond bur, a crosscut fissure carbide bur in air rotor and a crosscut fissure carbide bur in micromotor, were significantly higher than a fine grit straight fissure diamond bur, a plain fissure carbide bur and #600-grit silicon carbide abrasive paper in the micromotor. Therefore, selecting an appropriate bur and its speed may improve bonding for adhesive systems, although crosscut fissure carbide burs produced high bond strengths at either speed used.

Roles and Domains to Teach in Online Learning Environments: Educational ICT Competency Framework for University Teachers

NASA Astrophysics Data System (ADS)

Guasch, Teresa; Alvarez, Ibis; Espasa, Anna

This chapter is aimed at presenting an integrated framework of the educational information and communications technology (ICT) competencies that university teachers should have to teach in an online learning environment. Teaching through ICT in higher education involves performing three main roles - pedagogical, socialist, and design/planning - and also two cross-cutting domains that arise from the online environment: technological and managerial. This framework as well as the competencies for university teachers associated with it were validated at a European level by a dual process of net-based focus groups of teachers and teacher trainers in each of the participating countries in a European Project (Elene-TLC) and an online Delphi method involving 78 experts from 14 universities of ten European countries. The competency framework and the examples provided in the chapter are the basis for designing innovative professional development activities in online university environments.

The Role of Research in Viral Disease Eradication and Elimination Programs: Lessons for Malaria Eradication

PubMed Central

Breman, Joel G.; de Quadros, Ciro A.; Dowdle, Walter R.; Foege, William H.; Henderson, Donald A.; John, T. Jacob; Levine, Myron M.

2011-01-01

By examining the role research has played in eradication or regional elimination initiatives for three viral diseases—smallpox, poliomyelitis, and measles—we derive nine cross-cutting lessons applicable to malaria eradication. In these initiatives, some types of research commenced as the programs began and proceeded in parallel. Basic laboratory, clinical, and field research all contributed notably to progress made in the viral programs. For each program, vaccine was the lynchpin intervention, but as the programs progressed, research was required to improve vaccine formulations, delivery methods, and immunization schedules. Surveillance was fundamental to all three programs, whilst polio eradication also required improved diagnostic methods to identify asymptomatic infections. Molecular characterization of pathogen isolates strengthened surveillance and allowed insights into the geographic source of infections and their spread. Anthropologic, sociologic, and behavioural research were needed to address cultural and religious beliefs to expand community acceptance. The last phases of elimination and eradication became increasingly difficult, as a nil incidence was approached. Any eradication initiative for malaria must incorporate flexible research agendas that can adapt to changing epidemiologic contingencies and allow planning for posteradication scenarios. PMID:21311582

The effects of crosscutting before gang-ripping on dimension part yields from no. 1 and 2A common red oak lumber

Treesearch

Charles, J. Gatchell; Janice K. Wiedenbeck; Elizabeth S. Walker; Elizabeth S. Walker

1996-01-01

Mills should have the option to crosscut red oak lumber prior to gang-ripping to remove crook and worthless material and to take advantage of the quality differences between board ends. At least half of No: 1 and 2A Common red oak boards will have end-to-end yield differences of at least 10 percent. Preprocessing will cause a slight decrease in overall yield but will...

Cross-Cutting Faults

NASA Technical Reports Server (NTRS)

2005-01-01

16 May 2005 This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows cross-cutting fault scarps among graben features in northern Tempe Terra. Graben form in regions where the crust of the planet has been extended; such features are common in the regions surrounding the vast 'Tharsis Bulge' on Mars.

Location near: 43.7oN, 90.2oW Image width: 3 km (1.9 mi) Illumination from: lower left Season: Northern Summer

Noise Hazard Evaluation Sound Level Data on Noise Sources

DTIC Science & Technology

1975-01-01

Saw, Root Woodworking 43-20-J 102 16. Construction Saw, DeWalt Industrial 2185A 96 17. Cross-Cut Sw, Automatic 1-H 94 18, Cross-Cut Saw, DeWalt 3561...Saw, GM Diehr 750 92 53. Rip Saw, Wabach Industrial 750 97 59. Rip Saw, Yates American B. 102 60. Router: Black & Decker 118 61. Ruuter, Rockwell 150B...13. Sander, Disk, National-Detroit Dual Action 100 14. Stapler , Senco Mll 94* 15. Stapling Gun, Bostich II 105* 16. Stapling Gun, Bostich III 104* 17

Advances in Cross-Cutting Ideas for Computational Climate Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, Esmond; Evans, Katherine J.; Caldwell, Peter

This report presents results from the DOE-sponsored workshop titled, ``Advancing X-Cutting Ideas for Computational Climate Science Workshop,'' known as AXICCS, held on September 12--13, 2016 in Rockville, MD. The workshop brought together experts in climate science, computational climate science, computer science, and mathematics to discuss interesting but unsolved science questions regarding climate modeling and simulation, promoted collaboration among the diverse scientists in attendance, and brainstormed about possible tools and capabilities that could be developed to help address them. Emerged from discussions at the workshop were several research opportunities that the group felt could advance climate science significantly. These include (1)more » process-resolving models to provide insight into important processes and features of interest and inform the development of advanced physical parameterizations, (2) a community effort to develop and provide integrated model credibility, (3) including, organizing, and managing increasingly connected model components that increase model fidelity yet complexity, and (4) treating Earth system models as one interconnected organism without numerical or data based boundaries that limit interactions. The group also identified several cross-cutting advances in mathematics, computer science, and computational science that would be needed to enable one or more of these big ideas. It is critical to address the need for organized, verified, and optimized software, which enables the models to grow and continue to provide solutions in which the community can have confidence. Effectively utilizing the newest computer hardware enables simulation efficiency and the ability to handle output from increasingly complex and detailed models. This will be accomplished through hierarchical multiscale algorithms in tandem with new strategies for data handling, analysis, and storage. These big ideas and cross-cutting technologies for enabling breakthrough climate simulation advancements also need the "glue" of outreach and learning across the scientific domains to be successful. The workshop identified several strategies to allow productive, continuous engagement across those who have a broad knowledge of the various angles of the problem. Specific ideas to foster education and tools to make material progress were discussed. Examples include follow-on cross-cutting meetings that enable unstructured discussions of the types this workshop fostered. A concerted effort to recruit undergraduate and graduate students from all relevant domains and provide them experience, training, and networking across their immediate expertise is needed. This will broaden and expand their exposure to the future needs and solutions, and provide a pipeline of scientists with a diversity of knowledge and know-how. Providing real-world experience with subject matter experts from multiple angles may also motivate the students to attack these problems and even come up with the missing solutions.« less

Advances in Cross-Cutting Ideas for Computational Climate Science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, E.; Evans, K.; Caldwell, P.

This report presents results from the DOE-sponsored workshop titled, Advancing X-Cutting Ideas for Computational Climate Science Workshop,'' known as AXICCS, held on September 12--13, 2016 in Rockville, MD. The workshop brought together experts in climate science, computational climate science, computer science, and mathematics to discuss interesting but unsolved science questions regarding climate modeling and simulation, promoted collaboration among the diverse scientists in attendance, and brainstormed about possible tools and capabilities that could be developed to help address them. Emerged from discussions at the workshop were several research opportunities that the group felt could advance climate science significantly. These include (1)more » process-resolving models to provide insight into important processes and features of interest and inform the development of advanced physical parameterizations, (2) a community effort to develop and provide integrated model credibility, (3) including, organizing, and managing increasingly connected model components that increase model fidelity yet complexity, and (4) treating Earth system models as one interconnected organism without numerical or data based boundaries that limit interactions. The group also identified several cross-cutting advances in mathematics, computer science, and computational science that would be needed to enable one or more of these big ideas. It is critical to address the need for organized, verified, and optimized software, which enables the models to grow and continue to provide solutions in which the community can have confidence. Effectively utilizing the newest computer hardware enables simulation efficiency and the ability to handle output from increasingly complex and detailed models. This will be accomplished through hierarchical multiscale algorithms in tandem with new strategies for data handling, analysis, and storage. These big ideas and cross-cutting technologies for enabling breakthrough climate simulation advancements also need the "glue" of outreach and learning across the scientific domains to be successful. The workshop identified several strategies to allow productive, continuous engagement across those who have a broad knowledge of the various angles of the problem. Specific ideas to foster education and tools to make material progress were discussed. Examples include follow-on cross-cutting meetings that enable unstructured discussions of the types this workshop fostered. A concerted effort to recruit undergraduate and graduate students from all relevant domains and provide them experience, training, and networking across their immediate expertise is needed. This will broaden and expand their exposure to the future needs and solutions, and provide a pipeline of scientists with a diversity of knowledge and know-how. Providing real-world experience with subject matter experts from multiple angles may also motivate the students to attack these problems and even come up with the missing solutions.« less

Multiple hydrothermal and metamorphic events in the Kidd Creek volcanogenic massive sulphide deposit, Timmins, Ontario: evidence from tourmalines and chlorites

USGS Publications Warehouse

Slack, J.F.; Coad, P.R.

1989-01-01

The tourmalines and chlorites record a series of multiple hydrothermal and metamorphic events. Paragenetic studies suggest that tourmaline was deposited during several discrete stages of mineralization, as evidence by brecciation and cross-cutting relationships. Most of the tourmalines have two concentric growth zones defined by different colours (green, brown, blue, yellow). Some tourmalines also display pale discordant rims that cross-cut and embay the inner growth zones and polycrystalline, multiple-extinction domains. Late sulphide veinlets (chalcopyrite, pyrrhotite) transect the inner growth zones and pale discordant rims of many crystals. The concentric growth zones are interpreted as primary features developed by the main ore-forming hydrothermal system, whereas the discordant rims, polycrystalline domains, and cross-cutting sulphide veinlets reflect post-ore metamorphic processes. Variations in mineral proportions and mineral chemistry within the deposit mainly depend on fluctuations in temperature, pH, water/rock ratios, and amounts of entrained seawater. -from Authors

Task toward a Realization of Commercial Tokamak Fusion Plants in 2050 -The Role of ITER and the Succeeding Developments- 4.Technology and Material Research in Fusion Power Plant Development

NASA Astrophysics Data System (ADS)

Akiba, Masato; Matsui, Hideki; Takatsu, Hideyuki; Konishi, Satoshi

Technical issues regarding the fusion power plant that are required to be developed in the period of ITER construction and operation, both with ITER and with other facilities that complement ITER are described in this section. Three major fields are considered to be important in fusion technology. Section 4.1 summarizes blanket study, and ITER Test Blanket Module (TBM) development that focuses its effort on the first generation power blanket to be installed in DEMO. ITER will be equipped with 6 TBMs which are developed under each party's fusion program. In Japan, the solid breeder using water as a coolant is the primary candidate, and He-cooled pebble bed is the alternative. Other liquid options such as LiPb, Li or molten salt are developed by other parties' initiatives. The Test Blanket Working Group (TBWG) is coordinating these efforts. Japanese universities are investigating advanced concepts and fundamental crosscutting technologies. Section 4.2 introduces material development and particularly, the international irradiation facility, IFMIF. Reduced activation ferritic/martensitic steels are identified as promising candidates for the structural material of the first generation fusion blanket, while and vanadium alloy and SiC/SiC composite are pursued as advanced options. The IFMIF is currently planning the next phase of joint activity, EVEDA (Engineering Validation and Engineering Design Activity) that encompasses construction. Material studies together with the ITER TBM will provide essential technical information for development of the fusion power plant. Other technical issues to be addressed regarding the first generation fusion power plant are summarized in section 4.3. Development of components for ITER made remarkable progress for the major essential technology also necessary for future fusion plants, however many still need further improvements toward power plant. Such areas includes; the divertor, plasma heating/current drive, magnets, tritium, and remote handling. There remain many other technical issues for power plant which require integrated efforts.

Lamont-Doherty Earth Observatory Student Research Opportunities in Support of the Next Generation Science Standards

NASA Astrophysics Data System (ADS)

Passow, M. J.; Xu, C.; Newton, R.; Turrin, M.

2016-12-01

The Framework for K-12 Science and Next Generation Science Standards envision that students engage in practices that scientists use to deepen understanding of scientific ideas over time. The Lamont-Doherty Earth Observatory (LDEO) of Columbia University provides a suite of educational programs for high school students which strongly support this goal. Through summer and school year programs, LDEO offers access to vibrant, world-class research laboratories and scientists who have contributed to our understanding about the solid Earth, oceans, atmosphere, climate change, ice sheets, and more. Students become part of a research campus with state-of-the-art facilities. Programs include: A Day in the Life (collecting water variable data to construct a picture of Hudson River estuary dynamics); Rockland PLUS (experiences for students interested in planning sustainable development in their own communities); the Secondary School Field Research program (project-based research focused on biodiversity and environmental problem in New York metro area wetlands); Earth2Class (monthly Saturday workshops on a range of themes); and internships with cooperating researchers . Other examples of the scientific content include analyzing deep-sea sediments, examining rocks formed during an interglacial period 125,000 years ago to gain new insights about sea-level change, and monitoring invasive species in a nearby salt marsh. Students from NYC have their first exposure to collecting water samples, seining, and canoeing in the Hudson River, a contrast to the laboratory-based experiences ASR programs in cooperating hospitals. Students attend talks about cutting-edge investigations from Lamont scientists who are leaders in many fields, as well as advice about careers and college choices. Programs differ in length and location, but have fundamental commonalities: mentoring by early career and senior scientists, minimum scaffolding, treating data as publishable, and ensuring rigorous protocols. These programs serve as important models for developing and scaling programs that support the NGSS vision of helping students better understand how scientific knowledge develops and experience meaningful connections between crosscutting concepts, integrating engineering and technology, and disciplinary core ideas.

Sustainable Financing of Innovative Therapies: A Review of Approaches.

PubMed

Hollis, Aidan

2016-10-01

The process of innovation is inherently complex, and it occurs within an even more complex institutional environment characterized by incomplete information, market power, and externalities. There are therefore different competing approaches to supporting and financing innovation in medical technologies, which bring their own advantages and disadvantages. This article reviews value- and cost-based pricing, as well direct government funding, and cross-cutting institutional structures. It argues that performance-based risk-sharing agreements are likely to have little effect on the sustainability of financing; that there is a role for cost-based pricing models in some situations; and that the push towards longer exclusivity periods is likely contrary to the interests of industry.

Large Eddy Simulation of Supercritical CO2 Through Bend Pipes

NASA Astrophysics Data System (ADS)

He, Xiaoliang; Apte, Sourabh; Dogan, Omer

2017-11-01

Supercritical Carbon Dioxide (sCO2) is investigated as working fluid for power generation in thermal solar, fossil energy and nuclear power plants at high pressures. Severe erosion has been observed in the sCO2 test loops, particularly in nozzles, turbine blades and pipe bends. It is hypothesized that complex flow features such as flow separation and property variations may lead to large oscillations in the wall shear stresses and result in material erosion. In this work, large eddy simulations are conducted at different Reynolds numbers (5000, 27,000 and 50,000) to investigate the effect of heat transfer in a 90 degree bend pipe with unit radius of curvature in order to identify the potential causes of the erosion. The simulation is first performed without heat transfer to validate the flow solver against available experimental and computational studies. Mean flow statistics, turbulent kinetic energy, shear stresses and wall force spectra are computed and compared with available experimental data. Formation of counter-rotating vortices, named Dean vortices, are observed. Secondary flow pattern and swirling-switching flow motions are identified and visualized. Effects of heat transfer on these flow phenomena are then investigated by applying a constant heat flux at the wall. DOE Fossil Energy Crosscutting Technology Research Program.

Using partnerships with scientists to enhance teacher capacity to address the NGSS

NASA Astrophysics Data System (ADS)

Pavelsky, T.; Haine, D. B.; Drostin, M.

2013-12-01

Increasingly, scientists are seeking outreach experts to assist with the education and outreach components of their research grants. These experts have the skills and expertise to assist with translating scientific research into lessons and activities that are aligned to the Next Generation Science Standards (NGSS) as well as state standards, are STEM-focused and that address the realities of the K-12 science classroom. Since 2007, the Institute for the Environment (IE) at the University of North Carolina at Chapel Hill has been conducting teacher professional development and high school student science enrichment programs to promote climate literacy. Partnering with scientists to deepen content knowledge and promote engagement with technology and real data has been a successful strategy for cultivating increased climate literacy among teachers and students. In this session, we will share strategies for effectively engaging scientists in K-12 educational activities by providing specific examples of the various ways in which scientists can be integrated into programming and their research translated into relevant classroom activities. Engaging scientists and translating their research into classroom activities is an approach that becomes even more relevant with the advent of the NGSS. The NGSS's Disciplinary Core Ideas (DCIs) that encompass climate literacy can be addressed by partnering with scientists to provide teachers with current content knowledge and technological tools needed to promote integration of relevant science and engineering practices and cross-cutting themes. Here we highlight a successful partnership in which IE science educators collaborated with with a faculty member to develop a lesson for North Carolina teachers introducing them to new research on satellite remote sensing of the water cycle, while also promoting student engagement with local data. The resulting lesson was featured during a two-day, IE-led teacher workshop for 21 North Carolina high school teachers in July 2013 titled, 'Observing regional and global water resources: Using remote sensing and field data to better understand the hydrologic cycle.'

The grand challenge of managing the petascale facility.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aiken, R. J.; Mathematics and Computer Science

2007-02-28

This report is the result of a study of networks and how they may need to evolve to support petascale leadership computing and science. As Dr. Ray Orbach, director of the Department of Energy's Office of Science, says in the spring 2006 issue of SciDAC Review, 'One remarkable example of growth in unexpected directions has been in high-end computation'. In the same article Dr. Michael Strayer states, 'Moore's law suggests that before the end of the next cycle of SciDAC, we shall see petaflop computers'. Given the Office of Science's strong leadership and support for petascale computing and facilities, wemore » should expect to see petaflop computers in operation in support of science before the end of the decade, and DOE/SC Advanced Scientific Computing Research programs are focused on making this a reality. This study took its lead from this strong focus on petascale computing and the networks required to support such facilities, but it grew to include almost all aspects of the DOE/SC petascale computational and experimental science facilities, all of which will face daunting challenges in managing and analyzing the voluminous amounts of data expected. In addition, trends indicate the increased coupling of unique experimental facilities with computational facilities, along with the integration of multidisciplinary datasets and high-end computing with data-intensive computing; and we can expect these trends to continue at the petascale level and beyond. Coupled with recent technology trends, they clearly indicate the need for including capability petascale storage, networks, and experiments, as well as collaboration tools and programming environments, as integral components of the Office of Science's petascale capability metafacility. The objective of this report is to recommend a new cross-cutting program to support the management of petascale science and infrastructure. The appendices of the report document current and projected DOE computation facilities, science trends, and technology trends, whose combined impact can affect the manageability and stewardship of DOE's petascale facilities. This report is not meant to be all-inclusive. Rather, the facilities, science projects, and research topics presented are to be considered examples to clarify a point.« less

Cross-Cutting Relationships

NASA Technical Reports Server (NTRS)

2003-01-01

[figure removed for brevity, see original site]

Released 25 August 2003

The several linear cross-cutting grabens and collapse features observed in this THEMIS image illustrate the relative timing of a series of complex geologic processes as more recent events produce features that overlap and intersect older ones. Some impact craters are observed to be cut grabens, suggesting an older impact event compared to impact craters that appear fresh and unmodified.

Image information: VIS instrument. Latitude 14.1, Longitude 236.3 East (123.7 West). 19 meter/pixel resolution.

Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.

NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

Method of underground mining by pillar extraction

DOEpatents

Bowen, Ray J.; Bowen, William R.

1980-08-12

A method of sublevel caving and pillar and top coal extraction for mining thick coal seams includes the advance mining of rooms and crosscuts along the bottom of a seam to a height of about eight feet, and the retreat mining of the top coal from the rooms, crosscuts and portions of the pillars remaining from formation of the rooms and cross-cuts. In the retreat mining, a pocket is formed in a pillar, the top coal above the pocket is drilled, charged and shot, and then the fallen coal is loaded by a continuous miner so that the operator remains under a roof which has not been shot. The top coal from that portion of the room adjacent the pocket is then mined, and another pocket is formed in the pillar. The top coal above the second pocket is mined followed by the mining of the top coal of that portion of the room adjacent the second pocket, all by use of a continuous miner which allows the operator to remain under a roof portion which has not been shot.

Earthquake risk reduction in the United States: An assessment of selected user needs and recommendations for the National Earthquake Hazards Reduction Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1994-12-31

This Assessment was conducted to improve the National Earthquake Hazards Reduction Program (NEHRP) by providing NEHRP agencies with information that supports their user-oriented setting of crosscutting priorities in the NEHRP strategic planning process. The primary objective of this Assessment was to take a ``snapshot`` evaluation of the needs of selected users throughout the major program elements of NEHRP. Secondary objectives were to conduct an assessment of the knowledge that exists (or is being developed by NEHRP) to support earthquake risk reduction, and to begin a process of evaluating how NEHRP is meeting user needs. An identification of NEHRP`s strengths alsomore » resulted from the effort, since those strengths demonstrate successful methods that may be useful to NEHRP in the future. These strengths are identified in the text, and many of them represent important achievements since the Earthquake Hazards Reduction Act was passed in 1977.« less

Setting standards at the forefront of delivery system reform: aligning care coordination quality measures for multiple chronic conditions.

PubMed

DuGoff, Eva H; Dy, Sydney; Giovannetti, Erin R; Leff, Bruce; Boyd, Cynthia M

2013-01-01

The primary study objective is to assess how three major health reform care coordination initiatives (Accountable Care Organizations, Independence at Home, and Community-Based Care Transitions) measure concepts critical to care coordination for people with multiple chronic conditions. We find that there are major differences in quality measurement across these three large and politically important programs. Quality measures currently used or proposed for these new health reform-related programs addressing care coordination primarily capture continuity of care. Other key areas of care coordination, such as care transitions, patient-centeredness, and cross-cutting care across multiple conditions are infrequently addressed. The lack of a comprehensive and consistent measure set for care coordination will pose challenges for healthcare providers and policy makers who seek, respectively, to provide and reward well-coordinated care. In addition, this heterogeneity in measuring care coordination quality will generate new information, but will inhibit comparisons between these care coordination programs. © 2013 National Association for Healthcare Quality.

Setting Standards at the Forefront of Delivery System Reform: Aligning Care Coordination Quality Measures for Multiple Chronic Conditions

PubMed Central

DuGoff, Eva H.; Dy, Sydney; Giovannetti, Erin R.; Leff, Bruce; Boyd, Cynthia M.

2015-01-01

The primary study objective is to assess how three major health reform care coordination initiatives (Accountable Care Organizations, Independence at Home, and Community-based Care Transitions) measure concepts critical to care coordination for people with multiple chronic conditions. We find that there are major differences in quality measurement across these three large and politically important programs. Quality measures currently used or proposed for these new health reform-related programs addressing care coordination primarily capture continuity of care. Other key areas of care coordination, such as care transitions, patient-centeredness, and cross-cutting care across multiple conditions are infrequently addressed. The lack of a comprehensive and consistent measure set for care coordination will pose challenges for health care providers and policymakers who seek, respectively, to provide and reward well-coordinated care. In addition, this heterogeneity in measuring care coordination quality will generate new information, but will inhibit comparisons between these care coordination programs. PMID:24004040

The Integrating Role of the LBA and the LPB Programs as an Example of Cyberinfrastructures in International Scientific Collaboration

NASA Astrophysics Data System (ADS)

Dias, P. L.

2007-05-01

International science collaboration is a key component of research programs such as the The Large Scale Biosphere Atmosphere Interaction Program (LBA) and the La Plata Basin Project (LPB). Both are programs with crosscutting science questions permeating different areas of knowledge related to the functioning of the natural and agricultural ecosystems in the Amazon system (LBA) and the change in the hydrological, agricultural and social systems of the Plata Basin (LPB) ecosystem under natural climatic variability and climate change. Both programs are strongly related to GEWEX, CLIVAR and IGBP and are based on extensive use of data information system (LBA/LPB/DIS) with mirror sites in the US, Europe and South America. These international programs have a significant impact in building up regional scientific capabilities at all levels of education and triggered the establishment of new research groups located in remote areas of South America. The cyberinfrastructure has been fundamental to promote the integration of the research groups, and a remarkable feedback with the operational forecasting systems has been detected. The LBA/LPB should be used as examples on how to promote international scientific and operational collaboration.

Indicators for Evaluating Community- and Societal-Level Risk and Protective Factors for Violence Prevention: Findings From a Review of the Literature.

PubMed

Armstead, Theresa L; Wilkins, Natalie; Doreson, Amanda

Programs geared toward preventing violence before it occurs at the community and societal levels of the social ecology are particularly challenging to evaluate. These programs are often focused on impacting the antecedents (or risk and protective factors) to violence, making it difficult to determine program success when solely relying on measures of violence reduction. The goal of this literature review is to identify indicators to measure risk and protective factors for violence that are accessible and measured at the community level. Indicators of community- and societal-level risk and protective factors from 116 articles are identified. These indicators strengthen violence prevention researchers' and practitioners' ability to detect proximal effects of violence prevention programs, practices, and policies, and provide timely feedback on the impact of their work. Thus, opportunities exist for violence prevention researchers to further study the associations between various indicators and different violent outcomes and to inform practitioner, evaluator, and funder developed logic models that include indicators of relevant risk and protective factors for crosscutting violence prevention measures and outcomes.

Power Amplifier Module with 734-mW Continuous Wave Output Power

NASA Technical Reports Server (NTRS)

Fung, King Man; Samoska, Lorene A.; Kangaslahti, Pekka P.; Lamgrigtsen, Bjorn H.; Goldsmith, Paul F.; Lin, Robert H.; Soria, Mary M.; Cooperrider, Joelle T.; Micovic, Moroslav; Kurdoghlian, Ara

2010-01-01

Research findings were reported from an investigation of new gallium nitride (GaN) monolithic millimeter-wave integrated circuit (MMIC) power amplifiers (PAs) targeting the highest output power and the highest efficiency for class-A operation in W-band (75-110 GHz). W-band PAs are a major component of many frequency multiplied submillimeter-wave LO signal sources. For spectrometer arrays, substantial W-band power is required due to the passive lossy frequency multipliers-to generate higher frequency signals in nonlinear Schottky diode-based LO sources. By advancing PA technology, the LO system performance can be increased with possible cost reductions compared to current GaAs PAs. High-power, high-efficiency GaN PAs are cross-cutting and can enable more efficient local oscillator distribution systems for new astrophysics and planetary receivers and heterodyne array instruments. It can also allow for a new, electronically scannable solid-state array technology for future Earth science radar instruments and communications platforms.

Basic Research Needs for Carbon Capture: Beyond 2020

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alivisatos, Paul; Buchanan, Michelle

2010-03-04

This report is based on a SC/FE workshop on Carbon Capture: Beyond 2020, held March 4–5, 2010, to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The problem of thermodynamically efficient and scalable carbon capture stands as one of the greatest challenges for modern energy researchers. The vast majority of US and global energy use derives from fossil fuels, the combustion of which results in the emission of carbon dioxide into the atmosphere. These anthropogenic emissionsmore » are now altering the climate. Although many alternatives to combustion are being considered, the fact is that combustion will remain a principal component of the global energy system for decades to come. Today’s carbon capture technologies are expensive and cumbersome and energy intensive. If scientists could develop practical and cost-effective methods to capture carbon, those methods would at once alter the future of the largest industry in the world and provide a technical solution to one of the most vexing problems facing humanity. The carbon capture problem is a true grand challenge for today’s scientists. Postcombustion CO2 capture requires major new developments in disciplines spanning fundamental theoretical and experimental physical chemistry, materials design and synthesis, and chemical engineering. To start with, the CO2 molecule itself is thermodynamically stable and binding to it requires a distortion of the molecule away from its linear and symmetric arrangement. This binding of the gas molecule cannot be too strong, however; the sheer quantity of CO2 that must be captured ultimately dictates that the capture medium must be recycled over and over. Hence the CO2 once bound, must be released with relatively little energy input. Further, the CO2 must be rapidly and selectively pulled out of a mixture that contains many other gaseous components. The related processes of precombustion capture and oxycombustion pose similar challenges. It is this nexus of high-speed capture with high selectivity and minimal energy loss that makes this a true grand challenge problem, far beyond any of today’s artificial molecular manipulation technologies, and one whose solution will drive the advancement of molecular science to a new level of sophistication. We have only to look to nature, where such chemical separations are performed routinely, to imagine what may be achieved. The hemoglobin molecule transports oxygen in the blood rapidly and selectively and releases it with minimal energy penalty. Despite our improved understanding of how this biological system works, we have yet to engineer a molecular capture system that uses the fundamental cooperativity process that lies at the heart of the functionality of hemoglobin. While such biological examples provide inspiration, we also note that newly developed theoretical and computational capabilities; the synthesis of new molecules, materials, and membranes; and the remarkable advances in characterization techniques enabled by the Department of Energy’s measurement facilities all create a favorable environment for a major new basic research push to solve the carbon capture problem within the next decade. The Department of Energy has established a comprehensive strategy to meet the nation’s needs in the carbon capture arena. This framework has been developed following a series of workshops that have engaged all the critical stakeholder communities. The strategy that has emerged is based upon a tiered approach, with Fossil Energy taking the lead in a series of applied research programs that will test and extend our current systems. ARPA-E (Advanced Research Projects Agency–Energy) is supporting potential breakthroughs based upon innovative proposals to rapidly harness today’s technical capabilities in ways not previously considered. These needs and plans have been well summarized in the report from a recent workshop—Carbon Capture 2020, held in October 5 and 6, 2009—focused on near-term strategies for carbon capture improvements (http://www.netl.doe.gov/publications/ proceedings/09/CC2020/pdfs/Richards_Summary.pdf ). Yet the fact remains that when the carbon capture problem is looked at closely, we see today’s technologies fall far short of making carbon capture an economically viable process. This situation reinforces the need for a parallel, intensive use-inspired basic research effort to address the problem. This was the overwhelming conclusion of a recent workshop—Carbon Capture: Beyond 2020, held March 4 and 5, 2010—and is the subject of the present report. To prepare for the second workshop, an in-depth assessment of current technologies for carbon capture was conducted; the result of this study was a factual document, Technology and Applied R&D Needs for Carbon Capture: Beyond 2020. This document, which was prepared by experts in current carbon capture processes, also summarized the technological gaps or bottlenecks that limit currently available carbon capture technologies. The report considered the separation processes needed for all three CO2 emission reduction strategies—postcombustion, precombustion, and oxycombustion—and assessed three primary separation technologies based on liquid absorption, membranes, and solid adsorption. The workshop “Carbon Capture: Beyond 2020” convened approximately 80 attendees from universities, national laboratories, and industry to assess the basic research needed to address the current technical bottlenecks in carbon capture processes and to identify key research priority directions that will provide the foundations for future carbon capture technologies. The workshop began with a plenary session including speakers who summarized the extent of the carbon capture challenge, the various current approaches, and the limitations of these technologies. Workshop attendees were then given the charge to identify high-priority basic research directions that could provide revolutionary new concepts to form the basis for separation technologies in 2020 and beyond. The participants were divided into three major panels corresponding to different approaches for separating gases to reduce carbon emissions—liquid absorption, solid adsorption, and membrane separations. Two other panels were instructed to attend each of these three technology panels to assess crosscutting issues relevant to characterization and computation. At the end of the workshop, a final plenary session was convened to summarize the most critical research needs identified by the workshop attendees in each of the three major technical panels and from the two cross-cutting panels. The reports of the three technical panels included a set of high level Priority Research Directions meant to serve as inspiration to researchers in multiple disciplines—materials science, chemistry, biology, computational science, engineering, and others—to address the huge scientific challenges facing this nation and the world as we seek technologies for large-scale carbon capture beyond 2020. These Priority Research Directions were clustered around three main areas, all tightly coupled: Understand and control the dynamic atomic-level and molecular-level interactions of the targeted species with the separation media. Discover and design new materials that incorporate designed structures and functionalities tuned for optimum separation properties. Tailor capture/release processes with alternative driving forces, taking advantage of a new generation of materials. In each of the technical panels, the participants identified two major crosscutting research themes. The first was the development of new analytical tools that can characterize materials structure and molecular processes across broad spatial and temporal scales and under realistic conditions that mimic those encountered in actual separation processes. Such tools are needed to examine interfaces and thin films at the atomic and molecular levels, achieving an atomic/molecular-scale understanding of gas–host structures, kinetics, and dynamics, and understanding and control of nanoscale synthesis in multiple dimensions. A second major crosscutting theme was the development of new computational tools for theory, modeling, and simulation of separation processes. Computational techniques can be used to elucidate mechanisms responsible for observed separations, predict new desired features for advanced separations materials, and guide future experiments, thus complementing synthesis and characterization efforts. These two crosscut areas underscored the fact that the challenge for future carbon capture technologies will be met only with multidisciplinary teams of scientists and engineers. In addition, it was noted that success in this fundamental research area must be closely coupled with successful applied research to ensure the continuing assessment and maturation of new technologies as they undergo scale-up and deployment. Carbon capture is a very rich scientific problem, replete with opportunity for basic researchers to advance the frontiers of science as they engage on one of the most important technical challenges of our times. This workshop report outlines an ambitious agenda for addressing the very difficult problem of carbon capture by creating foundational new basic science. This new science will in turn pave the way for many additional advances across a broad range of scientific disciplines and technology sectors.« less

Electrodynamic Dust Shield for Space Applications

NASA Technical Reports Server (NTRS)

Mackey, P. J.; Johansen, M. R.; Olsen, R. C.; Raines, M. G.; Phillips, J. R., III; Pollard, J. R. S.; Calle, C. I.

2016-01-01

The International Space Exploration Coordination Group (ISECG) has chosen dust mitigation technology as a Global Exploration Roadmap (GER) critical technology need in order to reduce life cycle cost and risk, and increase the probability of mission success. NASA has also included Particulate Contamination Prevention and Mitigation as a cross-cutting technology to be developed for contamination prevention, cleaning and protection. This technology has been highlighted due to the detrimental effect of dust on both human and robotic missions. During manned Apollo missions, dust caused issues with both equipment and crew. Contamination of equipment caused many issues including incorrect instrument readings and increased temperatures due to masking of thermal radiators. The astronauts were directly affected by dust that covered space suits, obscured face shields and later propagated to the cabin and into the crew's eyes and lungs. Robotic missions on Mars were affected when solar panels were obscured by dust thereby reducing the effectiveness of the solar panels. The Electrostatics and Surface Physics Lab in Swamp Works at the Kennedy Space Center has been developing an Electrodynamic Dust Shield (EDS) to remove dust from multiple surfaces, including glass shields and thermal radiators. This technology has been tested in lab environments and has evolved over several years. Tests of the technology include reduced gravity flights (one-sixth g) in which Apollo Lunar dust samples were successfully removed from glass shields while under vacuum (10(exp -6) kPa).

National Aeronautics and Space Administration FY 2001 Accountability Report

NASA Technical Reports Server (NTRS)

2001-01-01

The National Aeronautics and Space Administration (NASA) is an independent Agency established to plan and manage the future of the Nation's civil aeronautics and space program. This Accountability Report covers Federal Fiscal Year (FY) 2001 (October 1, 2000, through September 30, 2001), with discussion of some subsequent events The Report contains an overview addressing the Agency's critical programs and financial performance and includes highlights of performance organized by goals and objectives of the Enterprises and Crosscutting Processes. The Report also summarizes NASA's stewardship over budget and financial resources, including audited financial statements and footnotes. The financial statements reflect an overall position of offices and activities, including assets and liabilities, as well as results of operations, pursuant to requirements of Federal law (31 U.S.C. 3515(b)). The auditor's opinions on NASA's financial statements, reports on internal controls, and compliance with laws and regulations are included in this Report.

National Aeronautics and Space Administration Fiscal Year 2001 Accountability Report

NASA Technical Reports Server (NTRS)

2002-01-01

The National Aeronautics and Space Administration (NASA) is an independent Agency established to plan and manage the future of the Nation's civil aeronautics and space program. This Accountability Report covers Federal Fiscal Year (FY) 2001 (October 1, 2000, through September 30, 2001), with discussion of some subsequent events. The Report contains an overview addressing the Agency's critical programs and financial performance and includes highlights of performance organized by goals and objectives of the Enterprises and Crosscutting Processes. The Report also summarizes NASA's stewardship over budget and financial resources, including audited financial statements and footnotes. The financial statements reflect an overall position of offices and activities, including assets and liabilities, as well as results of operations, pursuant to requirements of Federal law (31 U.S.C. 3515(b)). The auditor's opinions on NASA's financial statements, reports on internal controls, and compliance with laws and regulations are included in this report.

Rio + 5 -- INSTRAW's activities regarding the implementation of Agenda 21.

PubMed

1997-01-01

The International Research and Training Institute for the Advancement of Women (INSTRAW) was involved in research analysis and training activities that address women's issues on water supply, sanitation and waste management, development of new and renewable sources of energy, and natural resources since 1982. The four main thrusts of the INSTRAW program include: 1) the economic and political empowerment of the women; 2) women, media and communications; 3) women, environment and sustainable development; and 4) statistics and indicators on gender issues. These areas are approached in an integrated and holistic manner, which is crosscutting and cross disciplinary with relevant chapters Agenda 21. In addition, poverty, population growth, health, structural adjustment policies, education and training, water, energy, agriculture and forestry are addressed within the women's roles and activities context. This article presents an overview of the succeeding chapters, which focus on the programs developed and implemented to promote the well being of the women worldwide.

Medical technology as a key driver of rising health expenditure: disentangling the relationship

PubMed Central

Sorenson, Corinna; Drummond, Michael; Bhuiyan Khan, Beena

2013-01-01

Health care spending has risen steadily in most countries, becoming a concern for decision-makers worldwide. Commentators often point to new medical technology as the key driver for burgeoning expenditures. This paper critically appraises this conjecture, based on an analysis of the existing literature, with the aim of offering a more detailed and considered analysis of this relationship. Several databases were searched to identify relevant literature. Various categories of studies (eg, multivariate and cost-effectiveness analyses) were included to cover different perspectives, methodological approaches, and issues regarding the link between medical technology and costs. Selected articles were reviewed and relevant information was extracted into a standardized template and analyzed for key cross-cutting themes, ie, impact of technology on costs, factors influencing this relationship, and methodological challenges in measuring such linkages. A total of 86 studies were reviewed. The analysis suggests that the relationship between medical technology and spending is complex and often conflicting. Findings were frequently contingent on varying factors, such as the availability of other interventions, patient population, and the methodological approach employed. Moreover, the impact of technology on costs differed across technologies, in that some (eg, cancer drugs, invasive medical devices) had significant financial implications, while others were cost-neutral or cost-saving. In light of these issues, we argue that decision-makers and other commentators should extend their focus beyond costs solely to include consideration of whether medical technology results in better value in health care and broader socioeconomic benefits. PMID:23807855

Competencies and Training Guidelines for Behavioral Health Providers in Pediatric Primary Care.

PubMed

Njoroge, Wanjiku F M; Williamson, Ariel A; Mautone, Jennifer A; Robins, Paul M; Benton, Tami D

2017-10-01

This article focuses on the cross-discipline training competencies needed for preparing behavioral health providers to implement integrated primary care services. After a review of current competencies in the disciplines of child and adolescent psychiatry, psychology, and social work, cross-cutting competencies for integrated training purposes are identified. These competencies are comprehensive and broad and can be modified for use in varied settings and training programs. An existing and successful integrated care training model, currently implemented at Children's Hospital of Philadelphia, is described. This model and the training competencies are discussed in the context of recommendations for future work and training. Copyright © 2017 Elsevier Inc. All rights reserved.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tan, Lizhen; Yang, Ying; Tyburska-Puschel, Beata

The mission of the Nuclear Energy Enabling Technologies (NEET) program is to develop crosscutting technologies for nuclear energy applications. Advanced structural materials with superior performance at elevated temperatures are always desired for nuclear reactors, which can improve reactor economics, safety margins, and design flexibility. They benefit not only new reactors, including advanced light water reactors (LWRs) and fast reactors such as sodium-cooled fast reactor (SFR) that is primarily designed for management of high-level wastes, but also life extension of the existing fleet when component exchange is needed. Developing and utilizing the modern materials science tools (experimental, theoretical, and computational tools)more » is an important path to more efficient alloy development and process optimization. Ferritic-martensitic (FM) steels are important structural materials for nuclear reactors due to their advantages over other applicable materials like austenitic stainless steels, notably their resistance to void swelling, low thermal expansion coefficients, and higher thermal conductivity. However, traditional FM steels exhibit a noticeable yield strength reduction at elevated temperatures above ~500°C, which limits their applications in advanced nuclear reactors which target operating temperatures at 650°C or higher. Although oxide-dispersion-strengthened (ODS) ferritic steels have shown excellent high-temperature performance, their extremely high cost, limited size and fabricability of products, as well as the great difficulty with welding and joining, have limited or precluded their commercial applications. Zirconium has shown many benefits to Fe-base alloys such as grain refinement, improved phase stability, and reduced radiation-induced segregation. The ultimate goal of this project is, with the aid of computational modeling tools, to accelerate the development of a new generation of Zr-bearing ferritic alloys to be fabricated using conventional steelmaking practices, which have excellent radiation resistance and enhanced high-temperature creep performance greater than Grade 91.« less

Building the informatics infrastructure for comparative effectiveness research (CER): a review of the literature.

PubMed

Lopez, Marianne Hamilton; Holve, Erin; Sarkar, Indra Neil; Segal, Courtney

2012-07-01

Technological advances in clinical informatics have made large amounts of data accessible and potentially useful for research. As a result, a burgeoning literature addresses efforts to bridge the fields of health services research and biomedical informatics. The Electronic Data Methods Forum review examines peer-reviewed literature at the intersection of comparative effectiveness research and clinical informatics. The authors are specifically interested in characterizing this literature and identifying cross-cutting themes and gaps in the literature. A 3-step systematic literature search was conducted, including a structured search of PubMed, manual reviews of articles from selected publication lists, and manual reviews of research activities based on prospective electronic clinical data. Two thousand four hundred thirty-five citations were identified as potentially relevant. Ultimately, a full-text review was performed for 147 peer-reviewed papers. One hundred thirty-two articles were selected for inclusion in the review. Of these, 88 articles are the focus of the discussion in this paper. Three types of articles were identified, including papers that: (1) provide historical context or frameworks for using clinical informatics for research, (2) describe platforms and projects, and (3) discuss issues, challenges, and applications of natural language processing. In addition, 2 cross-cutting themes emerged: the challenges of conducting research in the absence of standardized ontologies and data collection; and unique data governance concerns related to the transfer, storage, deidentification, and access to electronic clinical data. Finally, the authors identified several current gaps on important topics such as the use of clinical informatics for cohort identification, cloud computing, and single point access to research data.

Analysis of the most common concept inventories in physics: What are we assessing?

NASA Astrophysics Data System (ADS)

Laverty, James T.; Caballero, Marcos D.

2018-06-01

Assessing student learning is a cornerstone of educational practice. Standardized assessments have played a significant role in the development of instruction, curricula, and educational spaces in college physics. However, the use of these assessments to evaluate student learning is only productive if they continue to align with our learning goals. Recently, there have been calls to elevate the process of science ("scientific practices") to the same level of importance and emphasis as the concepts of physics ("core ideas" and "crosscutting concepts"). We use the recently developed Three-Dimensional Learning Assessment Protocol to investigate how well the most commonly used standardized assessments in introductory physics (i.e., concept inventories) align with this modern understanding of physics education's learning goals. We find that many of the questions on concept inventories do elicit evidence of student understanding of core ideas, but do not have the potential to elicit evidence of scientific practices or crosscutting concepts. Furthermore, we find that the individual scientific practices and crosscutting concepts that are assessed using these tools are limited to a select few. We discuss the implications that these findings have on designing and testing curricula and instruction both in the past and for the future.

Cross-cutting Relationships of Surface Features on Europa

NASA Technical Reports Server (NTRS)

1997-01-01

This image of Jupiter's moon Europa shows a very complex terrain of ridges and fractures. The absence of large craters and the low number of small craters indicates that this surface is geologically young. The relative ages of the ridges can be determined by using the principle of cross-cutting relationships; i.e. older features are cross-cut by younger features. Using this principle, planetary geologists are able to unravel the sequence of events in this seemingly chaotic terrain to unfold Europa's unique geologic history.

The spacecraft Galileo obtained this image on February 20, 1997. The area covered in this image is approximately 11 miles (18 kilometers) by 8.5 miles (14 kilometers) across, near 15 North, 273 West. North is toward the top of the image, with the sun illuminating from the right.

The Jet Propulsion Laboratory, Pasadena, CA manages the mission for NASA's Office of Space Science, Washington, DC.

This image and other images and data received from Galileo are posted on the World Wide Web, on the Galileo mission home page at URL http://galileo.jpl.nasa.gov. Background information and educational context for the images can be found at URL http://www.jpl.nasa.gov/galileo/sepo

Mobile Health Technology Evaluation

PubMed Central

Kumar, Santosh; Nilsen, Wendy J.; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T.; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R. Craig; Mohr, David C.; Murphy, Susan A.; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

2013-01-01

Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and, (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, future possibilities and set a grand goal for the emerging field of mHealth research. PMID:23867031

Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems: Key Findings from a Roadmapping Workshop

PubMed Central

Weiss, Brian A.; Vogl, Gregory; Helu, Moneer; Qiao, Guixiu; Pellegrino, Joan; Justiniano, Mauricio; Raghunathan, Anand

2017-01-01

The National Institute of Standards and Technology (NIST) hosted the Roadmapping Workshop – Measurement Science for Prognostics and Health Management for Smart Manufacturing Systems (PHM4SMS) in Fall 2014 to discuss the needs and priorities of stakeholders in the PHM4SMS technology area. The workshop brought together over 70 members of the PHM community. The attendees included representatives from small, medium, and large manufacturers; technology developers and integrators; academic researchers; government organizations; trade associations; and standards bodies. The attendees discussed the current and anticipated measurement science challenges to advance PHM methods and techniques for smart manufacturing systems; the associated research and development needed to implement condition monitoring, diagnostic, and prognostic technologies within manufacturing environments; and the priorities to meet the needs of PHM in manufacturing. This paper will summarize the key findings of this workshop, and present some of the critical measurement science challenges and corresponding roadmaps, i.e., suggested courses of action, to advance PHM for manufacturing. Milestones and targeted capabilities will be presented for each roadmap across three areas: PHM Manufacturing Process Techniques; PHM Performance Assessment; and PHM Infrastructure – Hardware, Software, and Integration. An analysis of these roadmaps and crosscutting themes seen across the breakout sessions is also discussed. PMID:28664163

Assessment of sensor performance

NASA Astrophysics Data System (ADS)

Waldmann, C.; Tamburri, M.; Prien, R. D.; Fietzek, P.

2010-02-01

There is an international commitment to develop a comprehensive, coordinated and sustained ocean observation system. However, a foundation for any observing, monitoring or research effort is effective and reliable in situ sensor technologies that accurately measure key environmental parameters. Ultimately, the data used for modelling efforts, management decisions and rapid responses to ocean hazards are only as good as the instruments that collect them. There is also a compelling need to develop and incorporate new or novel technologies to improve all aspects of existing observing systems and meet various emerging challenges. Assessment of Sensor Performance was a cross-cutting issues session at the international OceanSensors08 workshop in Warnemünde, Germany, which also has penetrated some of the papers published as a result of the workshop (Denuault, 2009; Kröger et al., 2009; Zielinski et al., 2009). The discussions were focused on how best to classify and validate the instruments required for effective and reliable ocean observations and research. The following is a summary of the discussions and conclusions drawn from this workshop, which specifically addresses the characterisation of sensor systems, technology readiness levels, verification of sensor performance and quality management of sensor systems.

Joint federal research and development process to meet state and local needs. Part 1. Science and technology and political decision making

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wise, H F; Smith, L K; Einsweiler, R C

This part of the handbook addresses the basic how to do it - how states and local governments can identify complex and cross-cutting issues and develop and manage scientific and technical resources in seeking policy solutions to such issues. The following subjects are discussed: background statement of the issue; the research/decision-making process; defining problems and identifying research components; research and decision-making strategies; how to identify existing knowledge or ongoing research in the area of policy concern; and managing multi-disciplinary research. The fourteen agencies involved in this effort include: US Departments of Energy, Agriculture, Transportation, Housing and Urban Development, Environmental Protectionmore » Agency, and National Science Foundation. (PSB)« less

A DOE Perspective

NASA Astrophysics Data System (ADS)

Bennett, Kristin

2004-03-01

As one of the lead agencies for nanotechnology research and development, the Department of Energy (DOE) is revolutionizing the way we understand and manipulate materials at the nanoscale. As the Federal government's single largest supporter of basic research in the physical sciences in the United States, and overseeing the Nation's cross-cutting research programs in high-energy physics, nuclear physics, and fusion energy sciences, the DOE guides the grand challenges in nanomaterials research that will have an impact on everything from medicine, to energy production, to manufacturing. Within the DOE's Office of Science, the Office of Basic Energy Sciences (BES) leads research and development at the nanoscale, which supports the Department's missions of national security, energy, science, and the environment. The cornerstone of the program in nanoscience is the establishment and operation of five new Nanoscale Science Research Centers (NSRCs), which are under development at six DOE Laboratories. Throughout its history, DOE's Office of Science has designed, constructed and operated many of the nation's most advanced, large-scale research and development user facilities, of importance to all areas of science. These state-of-the art facilities are shared with the science community worldwide and contain technologies and instruments that are available nowhere else. Like all DOE national user facilities, the new NSRCs are designed to make novel state-of-the-art research tools available to the world, and to accelerate a broad scale national effort in basic nanoscience and nanotechnology. The NSRCs will be sited adjacent to or near existing DOE/BES major user facilities, and are designed to enable national user access to world-class capabilities for the synthesis, processing, fabrication, and analysis of materials at the nanoscale, and to transform the nation's approach to nanomaterials.

Building and strengthening infrastructure for data exchange: lessons from the beacon communities.

PubMed

Torres, Gretchen W; Swietek, Karen; Ubri, Petry S; Singer, Rachel F; Lowell, Kristina H; Miller, Wilhelmine

2014-01-01

The Beacon Community Cooperative Agreement Program supports interventions, including care-delivery innovations, provider performance measurement and feedback initiatives, and tools for providers and consumers to enhance care. Using a learning health system framework, we examine the Beacon Communities' processes in building and strengthening health IT (HIT) infrastructures, specifically successes and challenges in sharing patient information to improve clinical care. In 2010, the Office of the National Coordinator for Health Information Technology (ONC) launched the three-year program, which provided $250 million to 17 Beacon Communities to invest in HIT and health information exchange (HIE) infrastructure. Beacon Communities used this funding to develop and disseminate HIT-enabled quality improvement practices found effective in particular community and practice environments. NORC conducted 7 site visits, November 2012-March 2013, selecting Communities to represent diverse program features. From August-October 2013, NORC held discussions with the remaining 10 Communities. Following each visit or discussion, NORC summarized the information gathered, including transcripts, team observations, and other documents the Community provided, to facilitate a within-Community analysis of context and stakeholders, intervention strategies, enabling factors, and challenges. Although each Community designed and implemented data-sharing strategies in a unique environment, similar challenges and enabling factors emerged across the Beacons. From a learning health system perspective, their strategies to build and strengthen data-sharing infrastructures address the following crosscutting priorities: promoting technical advances and innovations by helping providers adapt EHRs for data exchange and performance measurement with customizable IT and offering technical support to smaller, independent providers; engaging key stakeholders; and fostering transparent governance and stewardship of the infrastructure with neutral conveners. While all the Communities developed or strengthened data-exchange infrastructure, each did this in a unique environment of existing health care market and legal factors. The Communities, however, encountered similar challenges and enabling factors. Organizations undertaking collaborative data sharing, performance measurement and clinical transformation can learn from the Beacon Communities' experience.

Building and Strengthening Infrastructure for Data Exchange: Lessons from the Beacon Communities

PubMed Central

Torres, Gretchen W.; Swietek, Karen; Ubri, Petry S.; Singer, Rachel F.; Lowell, Kristina H.; Miller, Wilhelmine

2014-01-01

Introduction: The Beacon Community Cooperative Agreement Program supports interventions, including care-delivery innovations, provider performance measurement and feedback initiatives, and tools for providers and consumers to enhance care. Using a learning health system framework, we examine the Beacon Communities’ processes in building and strengthening health IT (HIT) infrastructures, specifically successes and challenges in sharing patient information to improve clinical care. Background: In 2010, the Office of the National Coordinator for Health Information Technology (ONC) launched the three-year program, which provided $250 million to 17 Beacon Communities to invest in HIT and health information exchange (HIE) infrastructure. Beacon Communities used this funding to develop and disseminate HIT-enabled quality improvement practices found effective in particular community and practice environments. Methods: NORC conducted 7 site visits, November 2012–March 2013, selecting Communities to represent diverse program features. From August–October 2013, NORC held discussions with the remaining 10 Communities. Following each visit or discussion, NORC summarized the information gathered, including transcripts, team observations, and other documents the Community provided, to facilitate a within-Community analysis of context and stakeholders, intervention strategies, enabling factors, and challenges. Results: Although each Community designed and implemented data-sharing strategies in a unique environment, similar challenges and enabling factors emerged across the Beacons. From a learning health system perspective, their strategies to build and strengthen data-sharing infrastructures address the following crosscutting priorities: promoting technical advances and innovations by helping providers adapt EHRs for data exchange and performance measurement with customizable IT and offering technical support to smaller, independent providers; engaging key stakeholders; and fostering transparent governance and stewardship of the infrastructure with neutral conveners. Conclusion: While all the Communities developed or strengthened data-exchange infrastructure, each did this in a unique environment of existing health care market and legal factors. The Communities, however, encountered similar challenges and enabling factors. Organizations undertaking collaborative data sharing, performance measurement and clinical transformation can learn from the Beacon Communities’ experience. PMID:25848619

Emerging Energy-Efficiency and Greenhouse Gas Mitigation Technologies for the Pulp and Paper Industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kong, Lingbo; Hasanbeigi, Ali; Price, Lynn

2012-11-01

The pulp and paper industry ranks fourth in terms of energy consumption among industries worldwide. Globally, the pulp and paper industry accounted for approximately 5 percent of total world industrial final energy consumption in 2007, and contributed 2 percent of direct carbon dioxide (CO2) emissions from industry. Worldwide pulp and paper demand and production are projected to increase significantly by 2050, leading to an increase in this industry’s absolute energy use and greenhouse gas (GHG) emissions. Development of new energy-efficiency and GHG mitigation technologies and their deployment in the market will be crucial for the pulp and paper industry’s mid-more » and long-term climate change mitigation strategies. This report describes the industry’s processes and compiles available information on the energy savings, environmental and other benefits, costs, commercialization status, and references for 36 emerging technologies to reduce the industry’s energy use and GHG emissions. Although studies from around the world identify a variety of sector-specific and cross-cutting energy-efficiency technologies that have already been commercialized for the pulp and paper industry, information is scarce and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. The purpose of this report is to provide engineers, researchers, investors, paper companies, policy makers, and other interested parties with easy access to a well-structured resource of information on these technologies.« less

Chapter 12: Survey Design and Implementation for Estimating Gross Savings Cross-Cutting Protocol. The Uniform Methods Project: Methods for Determining Energy Efficiency Savings for Specific Measures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurnik, Charles W; Baumgartner, Robert

This chapter presents an overview of best practices for designing and executing survey research to estimate gross energy savings in energy efficiency evaluations. A detailed description of the specific techniques and strategies for designing questions, implementing a survey, and analyzing and reporting the survey procedures and results is beyond the scope of this chapter. So for each topic covered below, readers are encouraged to consult articles and books cited in References, as well as other sources that cover the specific topics in greater depth. This chapter focuses on the use of survey methods to collect data for estimating gross savingsmore » from energy efficiency programs.« less

Electrodynamic Dust Shield for Space Applications

NASA Technical Reports Server (NTRS)

Mackey, Paul J.; Johansen, Michael R.; Olsen, Robert C.; Raines, Matthew G.; Phillips, James R., III; Cox, Rachel E.; Hogue, Michael D.; Calle, Carlos I.; Pollard, Jacob R. S.

2016-01-01

The International Space Exploration Coordination Group (ISECG) has chosen dust mitigation technology as a Global Exploration Roadmap (GER) critical technology need in order to reduce life cycle cost and risk, and increase the probability of mission success. NASA has also included Particulate Contamination Prevention and Mitigation as a cross-cutting technology to be developed for contamination prevention, cleaning and protection. This technology has been highlighted due to the detrimental effect of dust on both human and robotic missions. During manned Apollo missions, dust caused issues with both equipment and crew. Contamination of equipment caused many issues including incorrect instrument readings and increased temperatures due to masking of thermal radiators. The astronauts were directly affected by dust that covered space suits, obscured face shields and later propagated to the cabin and into the crew's eyes and lungs. Robotic missions on Mars were affected when solar panels were obscured by dust thereby reducing the effectiveness of the solar panels. The Electrostatics and Surface Physics Lab in Swamp Works at the Kennedy Space Center has been developing an Electrodynamic Dust Shield (EDS) to remove dust from multiple surfaces, including glass shields and thermal radiators. This technology has been tested in lab environments and has evolved over several years. Tests of the technology include reduced gravity flights (6g) in which Apollo Lunar dust samples were successfully removed from glass shields while under vacuum (1 millipascal). Further development of the technology is underway to reduce the size of the EDS as well as to perform material and component testing outside of the International Space Station (ISS) on the Materials on International Space Station Experiment X (MISSE-X). This experiment is designed to verify that the EDS can withstand the harsh environment of space and will look to closely replicate the solar environment experienced on the moon. A second flight opportunity exists to provide an EDS to several companies as part of NASA's Lunar CATALYST program. The current mission concept would fly the EDS on the footpad of one of the Lunar CATALYST vehicles. To determine the effectiveness of the EDS system, image analysis will be performed on the footpad before, during and after EDS activation. If successful in these test flights, the Technology Readiness Level (TRL) of the EDS will be raised to a sufficient level to be used in the protection of mission equipment for future NASA and commercial missions to the moon, asteroids, and Mars.

Fracturing, fluid-rock interaction and mineralisation during the seismic cycle along the Alpine Fault

NASA Astrophysics Data System (ADS)

Williams, Jack N.; Toy, Virginia G.; Smith, Steven A. F.; Boulton, Carolyn

2017-10-01

The Alpine Fault has a <50 m wide geochemically distinct hanging-wall alteration zone. Using a combination of petrological and cathodoluminescence (CL) microscopy, Energy Dispersive Spectroscopy and X-ray diffraction, we document the habitat and mineralising phases of macro- and micro-fractures within the alteration zone using samples derived from outcrop and the Deep Fault Drilling Project. Veins predominantly contain calcite, chlorite, K-feldspar or muscovite. Gouge-filled fractures are also observed and reflect filling from mechanical wear and chlorite mineralisation. CL imaging suggests that each calcite vein was opened and sealed in one episode, possibly corresponding to a single seismic cycle. The thermal stability of mineralising phases and their mutually cross-cutting relationships indicates a cyclic history of fracture opening and mineralisation that extends throughout the seismogenic zone. Cataclasites contain intragranular veins that are hosted within quartzofeldspathic clasts, as well as veins that cross-cut clasts and the surrounding matrix. Intragranular calcite veins formed prior to or during cataclasis. Cross-cutting veins are interpreted to have formed by fracturing of relatively indurated cataclasites after near-surface slip localisation within the Alpine Fault's principal slip zone gouges (PSZs). These observations clearly demonstrate that shear strain is most localised in the shallowest part of the seismogenic zone.

How malleable is categorization by race? Evidence for competitive category use in social categorization.

PubMed

Klauer, Karl Christoph; Hölzenbein, Fabian; Calanchini, Jimmy; Sherman, Jeffrey W

2014-07-01

We contrast 3 theoretical viewpoints concerning the factors affecting social categorization by race: (a) the classical theory of social categorization highlighting the role of a priori accessibility and situational factors, (b) the classical theory augmented by a principle of competitive category use, and (c) competition between race (but not gender) and coalition with race (but not gender) encoded only as a proxy to coalition. Study 1 documents a confound that renders important portions of previous research difficult to interpret. In Studies 2 and 3, race categorization was stronger than categorization by more weakly accessible categories when situational support in terms of topic relevance was comparable across categories. A situational focus on race further increased race categorization. Race categorization was reduced in the presence of strongly cued cross-cutting coalitions. Race categorization also was depressed when situational factors promoted comparative processing of cross-cutting categories while cues to potential coalitional divisions were held constant (Study 4). Accessibility, topic relevance, and cuing cross-cutting coalitions had the same effects on gender categorization as found for race categorization (Study 5). Taken together, the results suggest that classical theories of social categorization have to be augmented by a principle of competitive category use that is not limited to a competition between race and coalition.

Lower limb joint motion during a cross cutting movement differs in individuals with and without chronic ankle instability.

PubMed

Koshino, Yuta; Yamanaka, Masanori; Ezawa, Yuya; Ishida, Tomoya; Kobayashi, Takumi; Samukawa, Mina; Saito, Hiroshi; Takeda, Naoki

2014-11-01

To compare the kinematics of lower limb joints between individuals with and without chronic ankle instability (CAI) during cross-turn and -cutting movements. Cross-sectional study. Motion analysis laboratory. Twelve subjects with CAI and twelve healthy controls. Hip flexion, adduction, and internal rotation, knee flexion, and ankle dorsiflexion and inversion angles were calculated in the 200 ms before initial ground contact and from initial ground contact to toe-off (stance phase) in a cross-turn movement during gait and a cross-cutting movement from a forward jump, and compared across the two groups. In the cross-cutting movement, the CAI group exhibited greater hip and knee flexion than the control group during the stance phase, and more hip abduction during the period before initial contact and the stance phase. In the cross-turn movement the joint kinematics were similar in the two groups. CAI subjects exhibited an altered pattern of the proximal joint kinematics during a cross-cutting movement. It is important for clinicians to assess the function of the hip and knee as well as the ankle, and to incorporate coordination training for the entire lower limb into rehabilitation after lateral ankle sprains. Copyright © 2013 Elsevier Ltd. All rights reserved.

Training hydrologists to be ecohydrologists and play a leading role in environmental problem solving

NASA Astrophysics Data System (ADS)

McClain, M. E.; Chícharo, L.; Fohrer, N.; Gaviño Novillo, M.; Windhorst, W.; Zalewski, M.

2012-06-01

Ecohydrology is a relatively new and rapidly growing subject area in the hydrology curriculum. It is a trans-disciplinary science derived from the larger earth systems science movement and examining mutual interactions of the hydrological cycle and ecosystems. It is also an applied science focused on problem solving and providing sound guidance to catchment-scale integrated land and water resources management. The principle spheres of ecohydrology include (i) climate-soil-vegetation-groundwater interactions at the land surface with special implications for land use, food production and climate change; (ii) riparian runoff, flooding, and flow regime dynamics in river corridors with special implications for water supply, water quality, and inland fisheries; and (iii) fluvial and groundwater inputs to lakes/reservoirs, estuaries, and coastal zones with special implications for water quality and fisheries. We propose an educational vision focused on the development of professional and personal competencies to impart a depth of scientific knowledge in the theory and practice of ecohydrology and a breadth of cross-cutting knowledge and skills to enable ecohydrologists to effectively collaborate with associated scientists and communicate results to resource managers, policy-makers, and other stakeholders. In-depth knowledge in hydrology, ecology, and biogeochemistry is emphasized, as well as technical skills in data collection, modeling, and statistical analysis. Cross-cutting knowledge is framed in the context of integrated water resources management. Personal competencies to be fostered in educational programs include creative thinking, cooperation, communication, and leadership. We consider a life-long learning context but highlight the importance of master's level training in the professional formation of ecohydrologists.

Training hydrologists to be ecohydrologists and play a leading role in environmental problem solving

NASA Astrophysics Data System (ADS)

McClain, M. E.; Chícharo, L.; Fohrer, N.; Gaviño Novillo, M.; Windhorst, W.; Zalewski, M.

2012-02-01

Ecohydrology is a relatively new and rapidly growing subject area in the hydrology curriculum. It is a trans-disciplinary science derived from the larger earth systems science movement and examining mutual interactions of the hydrological cycle and ecosystems. It is also an applied science focused on problem solving and providing sound guidance to catchment-scale integrated land and water resources management. The principle spheres of ecohydrology include (i) climate-soil-vegetation-groundwater interactions at the land surface with special implications for land use, food production and climate change; (ii) riparian runoff, flooding, and flow regime dynamics in river corridors with special implications for water supply, water quality, and inland fisheries; and (iii) fluvial and groundwater inputs to lakes/reservoirs, estuaries, and coastal zones with special implications for water quality and fisheries. We propose an educational vision focused on the development of professional and personal competencies to impart a depth of scientific knowledge in the theory and practice of ecohydrology and a breadth of cross-cutting knowledge and skills to enable ecohydrologists to effectively collaborate with associated scientists and communicate results to resource managers, policy-makers, and other stakeholders. In-depth knowledge in hydrology, ecology, and biogeochemistry is emphasized, as well as technical skills in data collection, modeling, and statistical analysis. Cross-cutting knowledge is framed in the context of integrated water resources management. Personal competencies to be fostered in educational programs include creative thinking, cooperation, communication, and leadership. We consider a life-long learning context but highlight the importance of master's level training in the professional formation of ecohydrologists.

Informing a Canadian paramedic profile: framing concepts, roles and crosscutting themes.

PubMed

Tavares, Walter; Bowles, Ron; Donelon, Becky

2016-09-07

Paramedicine is a rapidly evolving health profession with increasing responsibilities and contributions to healthcare. This rapid growth has left the profession with unclear professional and clinical boundaries. Existing defining frameworks may no longer align with the practice of paramedicine or expectations of the public. The purpose of this study was to explore the roles paramedics in Canada are to embody and that align with or support the rapid and ongoing evolution of the profession. We used a concurrent mixed methods study design involving a focused discourse analysis (i.e., analysis of language used to describe paramedics and paramedicine) of peer reviewed and grey literature (Phase 1) and in-depth one-on-one semi-structured interviews with key informants in Canadian paramedicine (Phase 2). Data from both methods were analyzed simultaneously throughout and after being merged using inductive thematic analysis. Saturation was reached after 99 national and international grey and peer reviewed publications and 20 in depth interviews with stakeholders representing six provinces, seven different service/agency types, 11 operational roles and seven provider roles. After merging both data sets three framing concepts, six roles and four crosscutting themes emerged that may be significant to both present-day practice and aspirational. Framing concepts, which provide context, include variable contexts or practice, embedded relationships and a health and social continuum. Roles include clinician, health and social advocate, team member, educator, professional and reflective practitioner. Crosscutting themes including patient safety, adaptability, compassion and communication appear to exist in all roles. The paramedic profession is experiencing a shift that appears to deviate or at least place a tension on traditional views or models of practice. Underlying and evolving notions of practice are resulting in intended or actual clinical and professional boundaries that may require the profession to re-think how it is defined and/or shaped. Until these framing concepts, roles and crosscutting themes are fully understood, tested and operationalized, tensions between guiding frameworks and actual or intended practice may persist.

Design of a Customized Multipurpose Nano-Enabled Implantable System for In-Vivo Theranostics

PubMed Central

Juanola-Feliu, Esteve; Miribel-Català, Pere Ll.; Páez Avilés, Cristina; Colomer-Farrarons, Jordi; González-Piñero, Manel; Samitier, Josep

2014-01-01

The first part of this paper reviews the current development and key issues on implantable multi-sensor devices for in vivo theranostics. Afterwards, the authors propose an innovative biomedical multisensory system for in vivo biomarker monitoring that could be suitable for customized theranostics applications. At this point, findings suggest that cross-cutting Key Enabling Technologies (KETs) could improve the overall performance of the system given that the convergence of technologies in nanotechnology, biotechnology, micro&nanoelectronics and advanced materials permit the development of new medical devices of small dimensions, using biocompatible materials, and embedding reliable and targeted biosensors, high speed data communication, and even energy autonomy. Therefore, this article deals with new research and market challenges of implantable sensor devices, from the point of view of the pervasive system, and time-to-market. The remote clinical monitoring approach introduced in this paper could be based on an array of biosensors to extract information from the patient. A key contribution of the authors is that the general architecture introduced in this paper would require minor modifications for the final customized bio-implantable medical device. PMID:25325336

Framework and criteria for program evaluation in the Office of Conservation and Renewable Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This study addresses the development of a framework and generic criteria for conducting program evaluation in the Office of Conservation and Renewable Energy. The evaluation process is intended to provide the Assistant Secretary with comprehensive and consistent evaluation data for management decisions regarding policy and strategy, crosscutting energy impacts and resource allocation and justification. The study defines evaluation objectives, identifies basic information requirements (criteria), and identifies a process for collecting evaluation results at the basic program level, integrating the results, and summarizing information upward through the CE organization to the Assistant Secretary. Methods are described by which initial criteria weremore » tested, analyzed, and refined for CE program applicability. General guidelines pertaining to evaluation and the Sunset Review requirements are examined and various types, designs, and models for evaluation are identified. Existing CE evaluation reports are reviewed and comments on their adequacy for meeting current needs are provided. An inventory and status survey of CE program evaluation activities is presented, as are issues, findings, and recommendations pertaining to CE evaluation and Sunset Review requirements. Also, sources of data for use in evaluation and the Sunset Review response are identified. An inventory of CE evaluation-related documents and reports is provided.« less

32 CFR 2001.47 - Destruction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... prescribed by agency heads. The methods and equipment used to routinely destroy classified information include burning, cross-cut shredding, wet-pulping, melting, mutilation, chemical decomposition or...

In acceptance we trust? Conceptualising acceptance as a viable approach to NGO security management.

PubMed

Fast, Larissa A; Freeman, C Faith; O'Neill, Michael; Rowley, Elizabeth

2013-04-01

This paper documents current understanding of acceptance as a security management approach and explores issues and challenges non-governmental organisations (NGOs) confront when implementing an acceptance approach to security management. It argues that the failure of organisations to systematise and clearly articulate acceptance as a distinct security management approach and a lack of organisational policies and procedures concerning acceptance hinder its efficacy as a security management approach. The paper identifies key and cross-cutting components of acceptance that are critical to its effective implementation in order to advance a comprehensive and systematic concept of acceptance. The key components of acceptance illustrate how organisational and staff functions affect positively or negatively an organisation's acceptance, and include: an organisation's principles and mission, communications, negotiation, programming, relationships and networks, stakeholder and context analysis, staffing, and image. The paper contends that acceptance is linked not only to good programming, but also to overall organisational management and structures. © 2013 The Author(s). Journal compilation © Overseas Development Institute, 2013.

Using Peer Feedback to Improve Students' Scientific Inquiry

NASA Astrophysics Data System (ADS)

Tasker, Tammy Q.; Herrenkohl, Leslie Rupert

2016-02-01

This article examines a 7th grade teacher's pedagogical practices to support her students to provide peer feedback to one another using technology during scientific inquiry. This research is part of a larger study in which teachers in California and Washington and their classes engaged in inquiry projects using a Web-based system called Web of Inquiry. Videotapes of classroom lessons and artifacts such as student work were collected as part of the corpus of data. In the case examined, Ms. E supports her students to collectively define "meaningful feedback," thereby improving the quality of feedback that was provided in the future. This is especially timely, given the attention in Next Generation Science Standards to cross-cutting concepts and practices that require students discuss and debate ideas with each other in order to improve their understanding and their written inquiry reports (NGSS, 2013).

Software Tools Streamline Project Management

NASA Technical Reports Server (NTRS)

2009-01-01

Three innovative software inventions from Ames Research Center (NETMARK, Program Management Tool, and Query-Based Document Management) are finding their way into NASA missions as well as industry applications. The first, NETMARK, is a program that enables integrated searching of data stored in a variety of databases and documents, meaning that users no longer have to look in several places for related information. NETMARK allows users to search and query information across all of these sources in one step. This cross-cutting capability in information analysis has exponentially reduced the amount of time needed to mine data from days or weeks to mere seconds. NETMARK has been used widely throughout NASA, enabling this automatic integration of information across many documents and databases. NASA projects that use NETMARK include the internal reporting system and project performance dashboard, Erasmus, NASA s enterprise management tool, which enhances organizational collaboration and information sharing through document routing and review; the Integrated Financial Management Program; International Space Station Knowledge Management; Mishap and Anomaly Information Reporting System; and management of the Mars Exploration Rovers. Approximately $1 billion worth of NASA s projects are currently managed using Program Management Tool (PMT), which is based on NETMARK. PMT is a comprehensive, Web-enabled application tool used to assist program and project managers within NASA enterprises in monitoring, disseminating, and tracking the progress of program and project milestones and other relevant resources. The PMT consists of an integrated knowledge repository built upon advanced enterprise-wide database integration techniques and the latest Web-enabled technologies. The current system is in a pilot operational mode allowing users to automatically manage, track, define, update, and view customizable milestone objectives and goals. The third software invention, Query-Based Document Management (QBDM) is a tool that enables content or context searches, either simple or hierarchical, across a variety of databases. The system enables users to specify notification subscriptions where they associate "contexts of interest" and "events of interest" to one or more documents or collection(s) of documents. Based on these subscriptions, users receive notification when the events of interest occur within the contexts of interest for associated document or collection(s) of documents. Users can also associate at least one notification time as part of the notification subscription, with at least one option for the time period of notifications.

Morphologie et cinématique d'une faille holocène dans les monts Péloritains (Sicile) ; implications géodynamiques

NASA Astrophysics Data System (ADS)

Hippolyte, Jean-Claude; Bouillin, Jean-Pierre

1999-11-01

The recent fault system of eastern Sicily can be identified in the Peloritan Mountains, in particular where it cross-cuts carbonate ranges in areas preserved from strong torrential erosion. The scarp of the Mount Kalfa fault results from normal sinistral slip at a mean rate of 0.9 mm·yr -1 during the Würm to Present east-west extension. This normal fault belongs to the Apenninico-Calabro-Sicilian rift zone that cross-cuts the Tyrrhenian arc. Its Sicilian and Apenninic segments enable characterization of a Middle-Late Pleistocene change of the stress regime that could have occurred during a steepening without subduction of the Ionian slab (along Calabria) and its lateral detachment.

Model-Driven Theme/UML

NASA Astrophysics Data System (ADS)

Carton, Andrew; Driver, Cormac; Jackson, Andrew; Clarke, Siobhán

Theme/UML is an existing approach to aspect-oriented modelling that supports the modularisation and composition of concerns, including crosscutting ones, in design. To date, its lack of integration with model-driven engineering (MDE) techniques has limited its benefits across the development lifecycle. Here, we describe our work on facilitating the use of Theme/UML as part of an MDE process. We have developed a transformation tool that adopts model-driven architecture (MDA) standards. It defines a concern composition mechanism, implemented as a model transformation, to support the enhanced modularisation features of Theme/UML. We evaluate our approach by applying it to the development of mobile, context-aware applications-an application area characterised by many non-functional requirements that manifest themselves as crosscutting concerns.

Mobile health technology evaluation: the mHealth evidence workshop.

PubMed

Kumar, Santosh; Nilsen, Wendy J; Abernethy, Amy; Atienza, Audie; Patrick, Kevin; Pavel, Misha; Riley, William T; Shar, Albert; Spring, Bonnie; Spruijt-Metz, Donna; Hedeker, Donald; Honavar, Vasant; Kravitz, Richard; Lefebvre, R Craig; Mohr, David C; Murphy, Susan A; Quinn, Charlene; Shusterman, Vladimir; Swendeman, Dallas

2013-08-01

Creative use of new mobile and wearable health information and sensing technologies (mHealth) has the potential to reduce the cost of health care and improve well-being in numerous ways. These applications are being developed in a variety of domains, but rigorous research is needed to examine the potential, as well as the challenges, of utilizing mobile technologies to improve health outcomes. Currently, evidence is sparse for the efficacy of mHealth. Although these technologies may be appealing and seemingly innocuous, research is needed to assess when, where, and for whom mHealth devices, apps, and systems are efficacious. In order to outline an approach to evidence generation in the field of mHealth that would ensure research is conducted on a rigorous empirical and theoretic foundation, on August 16, 2011, researchers gathered for the mHealth Evidence Workshop at NIH. The current paper presents the results of the workshop. Although the discussions at the meeting were cross-cutting, the areas covered can be categorized broadly into three areas: (1) evaluating assessments; (2) evaluating interventions; and (3) reshaping evidence generation using mHealth. This paper brings these concepts together to describe current evaluation standards, discuss future possibilities, and set a grand goal for the emerging field of mHealth research. Published by Elsevier Inc. on behalf of American Journal of Preventive Medicine.

High-Performance Secure Database Access Technologies for HEP Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Matthew Vranicar; John Weicher

2006-04-17

The Large Hadron Collider (LHC) at the CERN Laboratory will become the largest scientific instrument in the world when it starts operations in 2007. Large Scale Analysis Computer Systems (computational grids) are required to extract rare signals of new physics from petabytes of LHC detector data. In addition to file-based event data, LHC data processing applications require access to large amounts of data in relational databases: detector conditions, calibrations, etc. U.S. high energy physicists demand efficient performance of grid computing applications in LHC physics research where world-wide remote participation is vital to their success. To empower physicists with data-intensive analysismore » capabilities a whole hyperinfrastructure of distributed databases cross-cuts a multi-tier hierarchy of computational grids. The crosscutting allows separation of concerns across both the global environment of a federation of computational grids and the local environment of a physicist’s computer used for analysis. Very few efforts are on-going in the area of database and grid integration research. Most of these are outside of the U.S. and rely on traditional approaches to secure database access via an extraneous security layer separate from the database system core, preventing efficient data transfers. Our findings are shared by the Database Access and Integration Services Working Group of the Global Grid Forum, who states that "Research and development activities relating to the Grid have generally focused on applications where data is stored in files. However, in many scientific and commercial domains, database management systems have a central role in data storage, access, organization, authorization, etc, for numerous applications.” There is a clear opportunity for a technological breakthrough, requiring innovative steps to provide high-performance secure database access technologies for grid computing. We believe that an innovative database architecture where the secure authorization is pushed into the database engine will eliminate inefficient data transfer bottlenecks. Furthermore, traditionally separated database and security layers provide an extra vulnerability, leaving a weak clear-text password authorization as the only protection on the database core systems. Due to the legacy limitations of the systems’ security models, the allowed passwords often can not even comply with the DOE password guideline requirements. We see an opportunity for the tight integration of the secure authorization layer with the database server engine resulting in both improved performance and improved security. Phase I has focused on the development of a proof-of-concept prototype using Argonne National Laboratory’s (ANL) Argonne Tandem-Linac Accelerator System (ATLAS) project as a test scenario. By developing a grid-security enabled version of the ATLAS project’s current relation database solution, MySQL, PIOCON Technologies aims to offer a more efficient solution to secure database access.« less

Real-World Strategies to Engage and Retain Racial-Ethnic Minority Young Men Who Have Sex with Men in HIV Prevention Services.

PubMed

Freese, Thomas E; Padwa, Howard; Oeser, Brandy T; Rutkowski, Beth A; Schulte, Marya T

2017-06-01

Racial/ethnic minority young men who have sex with men (YMSM)-particularly African Americans and Hispanics/Latinos-are at particularly high risk for HIV infection. Devising strategies to improve engagement and retention in HIV prevention services among minority YMSM is critical if the United States is going to achieve the National HIV/AIDS Strategy goal of reducing HIV health-related disparities. This article presents findings from a national summit on racial/ethnic YMSM services convened by the Substance Abuse and Mental Health Services Administration-funded Center of Excellence on Racial and Ethnic Minority Young Men Who Have Sex with Men and Other Lesbian, Gay, Bisexual, and Transgender Populations (YMSM + LGBT CoE) in September 2015. The summit included (1) subgroup discussions focused on issues related to treatment access, outreach/engagement/retention, continuing care/recovery support, and health literacy for minority YMSM; and (2) a ranking process, where the NIATx Nominal Group Technique was used to identify the strategies and approaches that summit participants believed to be most promising for engaging and retaining minority YMSM in HIV prevention services. Analyses of results from summit activities highlight four key cross-cutting strategies-utilizing peers, providing holistic care, making services fun, and utilizing technology-as critical for engaging minority YMSM in HIV prevention care. Examples of programs that utilize these strategies and implications of these findings for policy and practice are discussed.

Priorities for Standards and Measurements to Accelerate Innovations in Nano-Electrotechnologies: Analysis of the NIST-Energetics-IEC TC 113 Survey+,*

PubMed Central

Bennett, Herbert S.; Andres, Howard; Pellegrino, Joan; Kwok, Winnie; Fabricius, Norbert; Chapin, J. Thomas

2009-01-01

In 2008, the National Institute of Standards and Technology and Energetics Incorporated collaborated with the International Electrotechnical Commission Technical Committee 113 (IEC TC 113) on nano-electrotechnologies to survey members of the international nanotechnologies community about priorities for standards and measurements to accelerate innovations in nano-electrotechnologies. In this paper, we analyze the 459 survey responses from 45 countries as one means to begin building a consensus on a framework leading to nano-electrotechnologies standards development by standards organizations and national measurement institutes. The distributions of priority rankings from all 459 respondents are such that there are perceived distinctions with statistical confidence between the relative international priorities for the several items ranked in each of the following five Survey category types: 1) Nano-electrotechnology Properties, 2) Nano-electrotechnology Taxonomy: Products, 3) Nano-electrotechnology Taxonomy: Cross-Cutting Technologies, 4) IEC General Discipline Areas, and 5) Stages of the Linear Economic Model. The global consensus prioritizations for ranked items in the above five category types suggest that the IEC TC 113 should focus initially on standards and measurements for electronic and electrical properties of sensors and fabrication tools that support performance assessments of nano-technology enabled sub-assemblies used in energy, medical, and computer products. PMID:27504216

Teaching Design in Middle-School: Instructors' Concerns and Scaffolding Strategies

NASA Astrophysics Data System (ADS)

Bamberger, Yael M.; Cahill, Clara S.

2013-04-01

This study deals with engineering education in the middle-school level. Its focus is instructors' concerns in teaching design, as well as scaffolding strategies that can help teachers deal with these concerns. Through participatory action research, nine instructors engaged in a process of development and instruction of a curriculum about energy along with engineering design. A 50-h curriculum was piloted during a summer camp for 38 middle-school students. Data was collected through instructors' materials: observation field notes, daily reflections and post-camp discussions. In addition, students' artifacts and planning graphical models were collected in order to explore how instructors' concerns were aligned with students' learning. Findings indicate three main tensions that reflect instructors' main concerns: how to provide sufficient scaffolding yet encourage creativity, how to scaffold hands-on experiences that promote mindful planning, and how to scaffold students' modeling practices. Pedagogical strategies for teaching design that developed through this work are described, as well as the ways they address the National Research Council (A framework for K-12 science education: practices, crosscutting concepts, and core ideas. National Academies Press, Washington, DC, 2011) core ideas of engineering education and the International Technological Literacy standards (ITEA in Standards for technological literacy, 3rd edn. International Technology education Association, Reston, VA, 2007).

Addressing Urban Health in Detroit, New York City, and Seattle Through Community-Based Participatory Research Partnerships

PubMed Central

Metzler, Marilyn M.; Higgins, Donna L.; Beeker, Carolyn G.; Freudenberg, Nicholas; Lantz, Paula M.; Senturia, Kirsten D.; Eisinger, Alison A.; Viruell-Fuentes, Edna A.; Gheisar, Bookda; Palermo, Ann-Gel; Softley, Donald

2003-01-01

Objective. This study describes key activities integral to the development of 3 community-based participatory research (CBPR) partnerships. Methods. We compared findings from individual case studies conducted at 3 urban research centers (URCs) to identify crosscutting adaptations of a CBPR approach in the first 4 years of the partnerships’ development. Results. Activities critical in partnership development include sharing decisionmaking, defining principles of collaboration, establishing research priorities, and securing funding. Intermediate outcomes were sustained CBPR partnerships, trust within the partnerships, public health research programs, and increased capacity to conduct CBPR. Challenges included the time needed for meaningful collaboration, concerns regarding sustainable funding, and issues related to institutional racism. Conclusions. The URC experiences suggest that CBPR can be successfully implemented in diverse settings. PMID:12721148

Integrating knowledge across domains to advance the science of health behavior: overcoming challenges and facilitating success.

PubMed

Klein, William M P; Grenen, Emily G; O'Connell, Mary; Blanch-Hartigan, Danielle; Chou, Wen-Ying Sylvia; Hall, Kara L; Taber, Jennifer M; Vogel, Amanda L

2017-03-01

Health behaviors often co-occur and have common determinants at multiple levels (e.g., individual, relational, environmental). Nevertheless, research programs often examine single health behaviors without a systematic attempt to integrate knowledge across behaviors. This paper highlights the significant potential of cross-cutting behavioral research to advance our understanding of the mechanisms and causal factors that shape health behaviors. It also offers suggestions for how researchers could develop more effective interventions. We highlight barriers to such an integrative science along with potential steps that can be taken to address these barriers. With a more nuanced understanding of health behavior, redundancies in research can be minimized, and a stronger evidence base for the development of health behavior interventions can be realized.

Overview and Status of the Bioastronautics Critical Path Roadmap (BCPR)

NASA Technical Reports Server (NTRS)

Charles, John

2004-01-01

Viewgraphs on the status and overview of the Bioastronautics Critical Path Roadmap (BCPR) are presented. The topics include: 1) BCPR Objectives; 2) BCPR and OBPR Program Management; 3) BCPR Disciplines & Cross-Cutting Areas; 4) Characteristics of BCPR Reference Missions; 5) Bioastronautics Timetable (notional); 6) BCPR Processes Risk Identification, Assessment, and Management; 7) Types of BCPR Risks; 8) Enabling Questions Categories; 9) Risk Mitigation Status; 10) Defining Levels of Accepted Risk; 11) BCPR Integration; 12) BCPR Implementation, Integration, and Validation; 13) BCPR Refinement Schedule; 14) Academy Review; 15) Rating Bioastronautics Risks; 16) Risk Rating Exercises; 17) Human Health Risk Assessment Criteria (examples); 18) A Recent Risk Rating Exercise; 19) Consensus Workshop Background; 20) Consensus Workshop Rating Analysis; 21) Consensus Workshop Selected Preliminary Recommendations; and 22) Access to BCPR Content.

National Environmental Justice Advisory Council

EPA Pesticide Factsheets

The National Environmental Justice Advisory Council (NEJAC) provides advice and recommendations about broad, cross-cutting issues related to environmental justice, from all stakeholders involved in the environmental justice dialogue.

Pulverized granite at the brittle-ductile transition: An example from the Kellyland fault zone, eastern Maine, U.S.A.

NASA Astrophysics Data System (ADS)

Sullivan, Walter A.; Peterman, Emily M.

2017-08-01

Granite from a 50-200-m-wide damage zone adjacent to the brittle-ductile Kellyland Fault Zone contains healed fracture networks that exhibit almost all of the characteristics of dynamically pulverized rocks. Fracture networks exhibit only weak preferred orientations, are mutually cross-cutting, separate jigsaw-like interlocking fragments, and are associated with recrystallized areas likely derived from pervasively comminuted material. Fracture networks in samples with primary igneous grain shapes further indicate pulverization. Minimum fracture densities in microcline are ∼100 mm/mm2. Larger fractures in microcline and quartz are sometimes marked by neoblasts, but most fractures are optically continuous with host grains and only visible in cathodoluminescence images. Fractures in plagioclase are crystallographically controlled and typically biotite filled. Petrologic observations and cross-cutting relationships between brittle structures and mylonitic rocks show that fracturing occurred at temperatures of 400 °C or more and pressures of 200 MPa. These constraints extend the known range of pulverization to much higher temperature and pressure conditions than previously thought possible. The mutually cross-cutting healed fractures also provide the first record of repeated damage in pulverized rocks. Furthermore, pulverization must have had a significant but transient effect on wall-rock porosity, and biotite-filled fracture networks in plagioclase form weak zones that could accommodate future strain localization.

National Environmental Justice Advisory Council Meetings

EPA Pesticide Factsheets

The National Environmental Justice Advisory Council (NEJAC) provides advice and recommendations about broad, cross-cutting issues related to environmental justice, from all stakeholders involved in the environmental justice dialogue.

National Environmental Justice Advisory Council Recommendations

EPA Pesticide Factsheets

The National Environmental Justice Advisory Council (NEJAC) provides advice and recommendations about broad, cross-cutting issues related to environmental justice, from all stakeholders involved in the environmental justice dialogue.

GeoEn -Research on Geo-Energy

NASA Astrophysics Data System (ADS)

Liebscher, A.; Scheck-Wenderoth, M.; GeoEn Research Group

2012-04-01

Axel Liebscher1, Magdalena Scheck-Wenderoth1 and the GeoEn Research Group1, 2,3 1 Helmholtz Centre Potsdam GFZ German Research Centre for Geosciences, Potsdam, Germany 2 University Potsdam, Germany 3 BTU Cottbus, Germany One of the pressing challenges for the 21st century is a secure, sustainable and economical energy supply at simultaneous mitigation of its climate impact. Besides a switch to renewable energy resources, the exploration and exploitation of new, unconventional energy resources will play a major role as will the further use of fossil fuels. With the switch to renewable energies the question of geological energy storage will become an important topic whereas further use of fossil fuels requires strategies like CCS to reduce its negative climate impacts. These different aspects of geo-energy make complementary or competitive demands on the subsurface and its use. It is therefore essential to treat the subsurface as a geo-resource of its own right. So far, geo-resource related research has often focused on specific resource systems, e.g. ore forming systems, hydrocarbon systems or geothermal systems, providing results largely applicable only to the restricted range of physicochemical properties of the respective geo-resource systems. However, with the increasing use of the subsurface as important geo-resource, the different geo-resource systems tend to overlap and interact and also become much more complex due to the additional use or presence of artificial and technical matter, as is the case in geological CO2 storage. On the other hand, the combined use of the subsurface for different purposes may also create synergetic effects. GeoEn is a joint research project explicitly addressing the fundamental questions related to the sustainable and holistic use of the geo-resource subsurface with a special focus on geo-energy. Project partners are the German Research Centre for Geosciences (GFZ), the University of Potsdam (UP) and the Brandenburg University of Technology (BTU). GeoEn research addresses CO2 capture, transport and utilization, CO2 storage, the unconventional energy resource shale gas and geothermal technologies. These four core topics are studied in an integrated approach using the synergy of cross-cutting themes. The latter encompass new exploration and reservoir technologies as well as innovative monitoring methods, both complemented by numerical simulations of the relevant processes including flow dynamics or heat transfer in the subsurface and along the technological process chains. Accordingly, synergies derived from the cross-cutting topics improve both methodological development applicable in equal measure to the utilization of geothermal energy and of shale gas as well as to the use and monitoring of CO2 storage. Complementary, new modelling approaches are developed that allow the simulation of involved processes to predict the occurrence and physical properties of potential reservoirs and the changes that may be induced by their utilization. We present first results with respect to exploration strategies, monitoring technologies and modeling approaches for the pilot storage site for CO2 in Ketzin and the geothermal research platform Groß-Schönebeck, where the respective technologies are tested and monitored.

National Environmental Justice Advisory Council Current Charges

EPA Pesticide Factsheets

The National Environmental Justice Advisory Council (NEJAC) provides advice and recommendations about broad, cross-cutting issues related to environmental justice, from all stakeholders involved in the environmental justice dialogue.

Political science. Exposure to ideologically diverse news and opinion on Facebook.

PubMed

Bakshy, Eytan; Messing, Solomon; Adamic, Lada A

2015-06-05

Exposure to news, opinion, and civic information increasingly occurs through social media. How do these online networks influence exposure to perspectives that cut across ideological lines? Using deidentified data, we examined how 10.1 million U.S. Facebook users interact with socially shared news. We directly measured ideological homophily in friend networks and examined the extent to which heterogeneous friends could potentially expose individuals to cross-cutting content. We then quantified the extent to which individuals encounter comparatively more or less diverse content while interacting via Facebook's algorithmically ranked News Feed and further studied users' choices to click through to ideologically discordant content. Compared with algorithmic ranking, individuals' choices played a stronger role in limiting exposure to cross-cutting content. Copyright © 2015, American Association for the Advancement of Science.

The effect of childhood sexual abuse on adolescent pregnancy: an integrative research review.

PubMed

Francisco, Melissa A; Hicks, Kasey; Powell, Julianne; Styles, Kristin; Tabor, Jessica L; Hulton, Linda J

2008-10-01

This study aims to describe the current research literature on the relationship of childhood sexual abuse and adolescent pregnancy and highlight the potential cross-cutting risk factors. Thirteen articles were identified as the basis of this review using Cooper's methodology (1998) for synthesizing research. Articles were categorized according to the levels of evidence proposed by Melnyk and Fineout-Overholt (2005). The majority of the studies identified a relationship between childhood sexual abuse and adolescent pregnancy (n=9). Cross-cutting risk factors included female gender, younger age, substance use/abuse, family constellation, parent-child conflict, and mother disengagement. Strategies for nurses to identify pregnant and parenting adolescents who have been sexually victimized are important for early intervention. Resiliency factors of young people who report positive outcomes are highlighted.

Effects of Starvation in Rock Bream, Oplegnathus fasciatus and Olive Flounder, Paralichthys olivaceus

PubMed Central

Park, In-Seok; Gil, Hyun Woo; Yoo, Gwang Yeol; Oh, Ji Su

2015-01-01

We assessed the effects of various dietary conditions on the growth, phenotypic traits, and morphometric dimensions of rock bream, Oplegnathus fasciatus and on the morphometric dimensions of sectioned olive flounder, Paralichthys olivaceus. Rock bream in the fed group increased in body weight, standard length, and condition factor, but these parameters decreased significantly for fish in the starved group (P < 0.05). The head connection dimensions of fish in the fed group decreased, while for starved fish there was increase in external morphometric dimensions (P < 0.05). In both species, sectioned morphometric analysis revealed that fish in the fed group had a larger body circumference and cross-cut sectional area, and greater cross-cut section height, relative to the starved group (P < 0.05). PMID:27004266

[Consumption of chispitas® multimicronutrient supplements and anemia in 6 - 35-month-old children: cross-cut study in the context of a populational health intervention in Apurimac, Peru].

PubMed

Huamán-Espino, Lucio; Aparco, Juan Pablo; Nuñez-Robles, Eloisa; Gonzáles, Elena; Pillaca, Jenny; Mayta-Tristán, Percy

2012-01-01

To assess the implementation of the Universal "Chispitas®" Multimicronutrient Supplement Program in Apurimac by determining the quantity and quality of sachets consumed and their connection with anemia, in 6 - 35-month-old children. A crosscut study was conducted by using a multistage sample in 2010. Anemia was considered to be related to altitude-adjusted hemoglobin values below 110 g/L. The consumption of multimicronutrients was classified as follows: less than 30; 30 to 59, and 60 or more sachets. The quality of consumption was considered to be adequate when the mother indicated that the child ate all his food with the supplement. The rationale for prevalence (RPa) adjusted by Poisson regression was calculated. 714 participants were included, 25.3% of which lived in poor houses and 59.2% in extreme poverty; 52.6% lived at over 3000 m of altitude. The prevalence of anemia was 51.3% (CI95%: 47.1-55.4%), 5.4% did not receive intervention; 60.3% consumed 60 or more sachets and 49.0% consumed them adequately. No association between the number of sachets received or consumed and anemia (p<0.05) was found. Children who consumed the supplement adequately showed lower prevalence of anemia than those who did not (RPa: 0.81; CI95%: 0.68-0.96) In order to reduce the prevalence of anemia, attention should not only focus on giving or consuming the necessary quantity of multimicronutrients, but also on ensuring that the consumption process is adequate, and work needs to be done in this area in order to improve this intervention.

Middleware and Web Services for the Collaborative Information Portal of NASA's Mars Exploration Rovers Mission

NASA Technical Reports Server (NTRS)

Sinderson, Elias; Magapu, Vish; Mak, Ronald

2004-01-01

We describe the design and deployment of the middleware for the Collaborative Information Portal (CIP), a mission critical J2EE application developed for NASA's 2003 Mars Exploration Rover mission. CIP enabled mission personnel to access data and images sent back from Mars, staff and event schedules, broadcast messages and clocks displaying various Earth and Mars time zones. We developed the CIP middleware in less than two years time usins cutting-edge technologies, including EJBs, servlets, JDBC, JNDI and JMS. The middleware was designed as a collection of independent, hot-deployable web services, providing secure access to back end file systems and databases. Throughout the middleware we enabled crosscutting capabilities such as runtime service configuration, security, logging and remote monitoring. This paper presents our approach to mitigating the challenges we faced, concluding with a review of the lessons we learned from this project and noting what we'd do differently and why.

Initial Validation of Robotic Operations for In-Space Assembly of a Large Solar Electric Propulsion Transport Vehicle

NASA Technical Reports Server (NTRS)

Komendera, Erik E.; Dorsey, John T.

2017-01-01

Developing a capability for the assembly of large space structures has the potential to increase the capabilities and performance of future space missions and spacecraft while reducing their cost. One such application is a megawatt-class solar electric propulsion (SEP) tug, representing a critical transportation ability for the NASA lunar, Mars, and solar system exploration missions. A series of robotic assembly experiments were recently completed at Langley Research Center (LaRC) that demonstrate most of the assembly steps for the SEP tug concept. The assembly experiments used a core set of robotic capabilities: long-reach manipulation and dexterous manipulation. This paper describes cross-cutting capabilities and technologies for in-space assembly (ISA), applies the ISA approach to a SEP tug, describes the design and development of two assembly demonstration concepts, and summarizes results of two sets of assembly experiments that validate the SEP tug assembly steps.

Field experiments on solar geoengineering: report of a workshop exploring a representative research portfolio.

PubMed

Keith, David W; Duren, Riley; MacMartin, Douglas G

2014-12-28

We summarize a portfolio of possible field experiments on solar radiation management (SRM) and related technologies. The portfolio is intended to support analysis of potential field research related to SRM including discussions about the overall merit and risk of such research as well as mechanisms for governing such research and assessments of observational needs. The proposals were generated with contributions from leading researchers at a workshop held in March 2014 at which the proposals were critically reviewed. The proposed research dealt with three major classes of SRM proposals: marine cloud brightening, stratospheric aerosols and cirrus cloud manipulation. The proposals are summarized here along with an analysis exploring variables such as space and time scale, risk and radiative forcing. Possible gaps, biases and cross-cutting considerations are discussed. Finally, suggestions for plausible next steps in the development of a systematic research programme are presented.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Antoinette J

Los Alamos National Laboratory (LANL) uses Capability Reviews to assess the quality and institutional integration of science, technology and engineering (STE) and to advise Laboratory Management on the current and future health of LANL STE. The capabilities are deliberately chosen to be crosscutting over the Laboratory and therefore will include experimental, theoretical and simulation disciplines from multiple line organizations. Capability Reviews are designed to provide a more holistic view of the STE quality, integration to achieve mission requirements, and mission relevance. The scope of these capabilities necessitate that there will be significant overlap in technical areas covered by capability reviewsmore » (e.g., materials research and weapons science and engineering). In addition, LANL staff may be reviewed in different capability reviews because of their varied assignments and expertise. The principal product of the Capability Review is the report that includes the review committee's assessments, recommendations, and recommendations for STE.« less

Field experiments on solar geoengineering: report of a workshop exploring a representative research portfolio

PubMed Central

Keith, David W.; Duren, Riley; MacMartin, Douglas G.

2014-01-01

We summarize a portfolio of possible field experiments on solar radiation management (SRM) and related technologies. The portfolio is intended to support analysis of potential field research related to SRM including discussions about the overall merit and risk of such research as well as mechanisms for governing such research and assessments of observational needs. The proposals were generated with contributions from leading researchers at a workshop held in March 2014 at which the proposals were critically reviewed. The proposed research dealt with three major classes of SRM proposals: marine cloud brightening, stratospheric aerosols and cirrus cloud manipulation. The proposals are summarized here along with an analysis exploring variables such as space and time scale, risk and radiative forcing. Possible gaps, biases and cross-cutting considerations are discussed. Finally, suggestions for plausible next steps in the development of a systematic research programme are presented. PMID:25404684

NGSS, Climate & Energy: Teaching About Climate Change Without Teaching About Energy Is Like Teaching About Lung Cancer Without Teaching About Smoking

NASA Astrophysics Data System (ADS)

Duggan-Haas, D.

2013-12-01

The ideas of systems pervade the Next Generation Science Standards, and well they should. The title of this abstract, paraphrased from commentator Chris Hayes, bluntly summarizes what should be central to the design of curriculum and instruction in the era of climate change and NGSS. It reflects a systems perspective, highlighting that the relationship between and among scientific topics are as important as the topics themselves. The centrality of systems and of human impacts within systems is highlighted by the fact that within the NGSS, the most connected Disciplinary Core Idea is Earth and Space Sciences - 3: Earth and Human Activity. 'ESS3' appears 457 times and on more than a third of the pages in the pdf of all the performance expectations. The lion's share of these appearances are in the connections boxes below the performance indicators, showing the connections -- the relationships within the Earth system -- of this topic to a multitude of expectations. Deep understandings of climate and climate change require understandings relationships between the atmosphere and human activity, and especially the impacts of energy use. As energy is needed for essentially everything we do, this is a big deal. Yet, in the typical high school science programs today, energy and its relation to climate is not prominent. NGSS has the potential to change that. The Crosscutting Concepts clearly reflect a systems approach, with four of the seven including the word 'system' within their one sentence description. This presentation will address systems in NGSS generally and use the examples from our changing energy system, to highlight ways to address climate and energy in multiple courses at different grade levels. Energy use varies across time and space, and the study of energy ties directly to all of Crosscutting Concepts. We will consider the map, showing aspects of the geography of energy, and historical energy transitions, such as the move from dependence of wood for fuel to reliance largely on fossil fuels, through the lens of the crosscutting concepts: 1. Patterns. 2. Cause and effect: Mechanism and explanation.3. Scale, proportion, and quantity.4. Systems and system models. 5. Energy and matter. 6. Structure and function. 7. Stability and change. And, we will connect to other resources and strategies for effectively addressing climate and energy in the context of NGSS. The Geography of Energy: an excerpt of a map showing electric power net generation by source for the Northeast.

National Institute of Environmental Health Sciences: 50 Years of Advancing Science and Improving Lung Health.

PubMed

Antony, Veena B; Redlich, Carrie A; Pinkerton, Kent E; Balmes, John; Harkema, Jack R

2016-11-15

The American Thoracic Society celebrates the 50th anniversary of the National Institute of Environmental Health Sciences (NIEHS). The NIEHS has had enormous impact through its focus on research, training, and translational science on lung health. It has been an advocate for clean air both in the United States and across the world. The cutting-edge science funded by the NIEHS has led to major discoveries that have broadened our understanding of the pathogenesis and treatment for lung disease. Importantly, the NIEHS has developed and fostered mechanisms that require cross-cutting science across the spectrum of areas of inquiry, bringing together environmental and social scientists with clinicians to bring their expertise on specific areas of investigation. The intramural program of the NIEHS nurtures cutting-edge science, and the extramural program encourages investigator-initiated research while at the same time providing broader direction through important initiatives. Under the umbrella of the NIEHS and guided by Dr. Linda Birnbaum, the director of the NIEHS, important collaborative programs, such as the Superfund Program and the National Toxicology Program, work to discover mechanisms to protect from environmental toxins. The American Thoracic Society has overlapping goals with the NIEHS, and the strategic plans of both august bodies converge to synergize on population lung health. These bonds must be tightened and highlighted as we work toward our common goals.

Alternative Fuels Data Center

Science.gov Websites

-dominated economy; demonstrating and fostering innovation in the use of clean energy, including alternative a workforce with cross-cutting skills to support a clean energy economy in the state. For more

30 CFR 75.501-2 - Permissible electric face equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... boxes used for making multiple power connections inby the last open crosscut shall be permissible; and...-driven mine equipment, except low horsepower rock dusting equipment, that employs an electric current...

30 CFR 75.501-2 - Permissible electric face equipment.

Code of Federal Regulations, 2010 CFR

2010-07-01

... boxes used for making multiple power connections inby the last open crosscut shall be permissible; and...-driven mine equipment, except low horsepower rock dusting equipment, that employs an electric current...

49 CFR 602.15 - Grant requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... either State or locally adopted building codes or standards, the higher of the competing minimums would... title 49, United States Code, as well as cross-cutting requirements, including but not limited to those...

49 CFR 602.15 - Grant requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... either State or locally adopted building codes or standards, the higher of the competing minimums would... title 49, United States Code, as well as cross-cutting requirements, including but not limited to those...

Nanostructured Bulk Thermoelectric Generator for Efficient Power Harvesting for Self-powered Sensor Networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yanliang; Butt, Darryl; Agarwal, Vivek

2015-07-01

The objective of this Nuclear Energy Enabling Technology research project is to develop high-efficiency and reliable thermoelectric generators for self-powered wireless sensors nodes utilizing thermal energy from nuclear plant or fuel cycle. The power harvesting technology has crosscutting significance to address critical technology gaps in monitoring nuclear plants and fuel cycle. The outcomes of the project will lead to significant advancement in sensors and instrumentation technology, reducing cost, improving monitoring reliability and therefore enhancing safety. The self-powered wireless sensor networks could support the long-term safe and economical operation of all the reactor designs and fuel cycle concepts, as well asmore » spent fuel storage and many other nuclear science and engineering applications. The research is based on recent breakthroughs in high-performance nanostructured bulk (nanobulk) thermoelectric materials that enable high-efficiency direct heat-to-electricity conversion over a wide temperature range. The nanobulk thermoelectric materials that the research team at Boise State University and University of Houston has developed yield up to a 50% increase in the thermoelectric figure of merit, ZT, compared with state-of-the-art bulk counterparts. This report focuses on the selection of optimal thermoelectric materials for this project. The team has performed extensive study on two thermoelectric materials systems, i.e. the half-Heusler materials, and the Bismuth-Telluride materials. The report contains our recent research results on the fabrication, characterization and thermoelectric property measurements of these two materials.« less

Astrobiology Learning Progressions: Linking Astrobiology Concepts with the 3D Learning Paradigm of NGSS

NASA Astrophysics Data System (ADS)

Scalice, D.; Davis, H. B.; Leach, D.; Chambers, N.

2016-12-01

The Next Generation Science Standards (NGSS) introduce a Framework for teaching and learning with three interconnected "dimensions:" Disciplinary Core Ideas (DCI's), Cross-cutting Concepts (CCC's), and Science and Engineering Practices (SEP's). This "3D" Framework outlines progressions of learning from K-12 based on the DCI's, detailing which parts of a concept should be taught at each grade band. We used these discipline-based progressions to synthesize interdisciplinary progressions for core concepts in astrobiology, such as the origins of life, what makes a world habitable, biosignatures, and searching for life on other worlds. The final product is an organizing tool for lesson plans, learning media, and other educational materials in astrobiology, as well as a fundamental resource in astrobiology education that serves both educators and scientists as they plan and carry out their programs for learners.

Intelligent transportation systems and intermodal freight transportation

DOT National Transportation Integrated Search

1998-09-01

Advanced Traveler Information Systems (ATIS) Cross-Cutting report summarizes and interprets the results exclusively of several Field Operational Tests (FOTs) that have traveler information components. The FOTs considered in this report include: Atlan...

30 CFR 75.2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Secretary of the Interior and Secretary of Health, Education, and Welfare are continued in effect. Rock dust... during the mining cycle. Working place. The area of a coal mine inby the last open crosscut. Working...

A SUBSTRUCTURE INSIDE SPIRAL ARMS, AND A MIRROR IMAGE ACROSS THE GALACTIC MERIDIAN

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vallée, Jacques P., E-mail: jacques.p.vallee@gmail.com

2016-04-10

Though the galactic density wave theory is over 50 years old and is well known in science, it has been difficult to say whether it fits our own Milky Way disk. Here we show a substructure inside the spiral arms. This substructure is reversing with respect to the Galactic Meridian (longitude zero), and crosscuts of the arms at negative longitudes appear as mirror images of crosscuts of the arms at positive longitudes. Four lanes are delineated: a mid-arm (extended {sup 12}CO gas at the mid-arm, H i atoms), an in-between offset by about 100 pc (synchrotron, radio recombination lines), anmore » in-between offset by about 200 pc (masers, colder dust), and an inner edge (hotter dust seen in mid-IR and near-IR)« less

Cryogenic Fluid Technologies for Long Duration In-Space Operations

NASA Technical Reports Server (NTRS)

Motil, Susan M.; Tramel, Terri L.

2008-01-01

Reliable knowledge of low-gravity cryogenic fluid management behavior is lacking and yet is critical in the areas of storage, distribution, and low-gravity propellant management. The Vision for Space Exploration mission objectives will require the use of high performance cryogenic propellants (hydrogen, oxygen, and methane). Additionally, lunar missions will require success in storing and transferring liquid and gas commodities on the surface. The fundamental challenges associated with the in-space use of cryogens are their susceptibility to environmental heat, their complex thermodynamic and fluid dynamic behavior in low gravity and the uncertainty of the position of the liquid-vapor interface if the propellants are not settled. The Cryogenic Fluid Management (CFM) project is addressing these issues through ground testing and analytical model development, and has crosscutting applications and benefits to virtually all missions requiring in-space operations with cryogens. Such knowledge can significantly reduce or even eliminate tank fluid boil-off losses for long term missions, reduce propellant launch mass and on-orbit margins, and simplify vehicle operations. The Cryogenic Fluid Management (CFM) Project is conducting testing and performing analytical evaluation of several areas to enable NASA s Exploration Vision. This paper discusses the content and progress of the technology focus areas within CFM.

Using ecological theory to evaluate the effectiveness of an indigenous community intervention: A study of Sexual Assault Nurse Examiner (SANE) programs.

PubMed

Campbell, Rebecca; Patterson, Debra; Fehler-Cabral, Giannina

2010-12-01

In recent years, there has been renewed interest among community psychologists in indigenous interventions, which are programs created by local practitioners (rather than researchers) already rooted in their communities. Indigenous interventions have strong ecological validity, but their effectiveness is often unknown because so few are rigorously evaluated. The goal of this project was to use Kelly and Trickett's ecological theory as a conceptual framework for evaluating an indigenous intervention and its mediating mechanisms of effectiveness. The focal intervention was a midwestern Sexual Assault Nurse Examiner (SANE) program, which provides post-assault medical care, crisis intervention, and medical forensic exams for sexual assault survivors. Prior studies of SANE programs have suggested that these interventions may help increase sexual assault prosecution rates. In this case example, we used a mixed methods design to determine if this program contributed to increased prosecution rates, and if so, why. Based on qualitative interviews with key stakeholders, we found substantial evidence for the Principle of Interdependence such that the SANE program strengthened the interconnections between the legal and medical systems, which contributed to increased prosecution. The intervention was effective in these outcomes because it promoted Cycling of Resources throughout the systems and fostered Adaptation of new roles for legal and medical personnel. Moving beyond this specific case example, this paper also examines cross-cutting advantages and struggles of using an ecological approach in the evaluation of indigenous community interventions.

Developing the next generation of dissemination and implementation researchers: insights from initial trainees.

PubMed

Stamatakis, Katherine A; Norton, Wynne E; Stirman, Shannon W; Melvin, Cathy; Brownson, Ross C

2013-03-12

Dissemination and implementation (D&I) research is a relatively young discipline, underscoring the importance of training and career development in building and sustaining the field. As such, D&I research faces several challenges in designing formal training programs and guidance for career development. A cohort of early-stage investigators (ESI) recently involved in an implementation research training program provided a resource for formative data in identifying needs and solutions around career development. Responses outlined fellows' perspectives on the perceived usefulness and importance of, as well as barriers to, developing practice linkages, acquiring additional methods training, academic advancement, and identifying institutional supports. Mentorship was a cross-cutting issue and was further discussed in terms of ways it could foster career advancement in the context of D&I research. Advancing an emerging field while simultaneously developing an academic career offers a unique challenge to ESIs in D&I research. This article summarizes findings from the formative data that outlines some directions for ESIs and provides linkages to the literature and other resources on key points.

Microgravity Materials Science Conference 2000. Volume 1

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 1 of 3 of the 2000 Microgravity Material Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference. In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in materials science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people. Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 3

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan; Bennett, Nancy; McCauley, Dannah; Murphy, Karen; Poindexter, Samantha

2001-01-01

This is Volume 3 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference was to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Microgravity Materials Science Conference 2000. Volume 2

NASA Technical Reports Server (NTRS)

Ramachandran, Narayanan (Editor); Bennett, Nancy (Editor); McCauley, Dannah (Editor); Murphy, Karen (Editor); Poindexter, Samantha (Editor)

2001-01-01

This is Volume 2 of 3 of the 2000 Microgravity Materials Science Conference that was held June 6-8 at the Von Braun Center, Huntsville, Alabama. It was organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Microgravity Research Division (MRD) at NASA Headquarters, and hosted by NASA Marshall Space Flight Center and the Alliance for Microgravity Materials Science and Applications (AMMSA). It was the fourth NASA conference of this type in the Microgravity materials science discipline. The microgravity science program sponsored approx. 200 investigators, all of whom made oral or poster presentations at this conference- In addition, posters and exhibits covering NASA microgravity facilities, advanced technology development projects sponsored by the NASA Microgravity Research Division at NASA Headquarters, and commercial interests were exhibited. The purpose of the conference %%,its to inform the materials science community of research opportunities in reduced gravity and to highlight the Spring 2001 release of the NASA Research Announcement (NRA) to solicit proposals for future investigations. It also served to review the current research and activities in material,, science, to discuss the envisioned long-term goals. and to highlight new crosscutting research areas of particular interest to MRD. The conference was aimed at materials science researchers from academia, industry, and government. A workshop on in situ resource utilization (ISRU) was held in conjunction with the conference with the goal of evaluating and prioritizing processing issues in Lunar and Martian type environments. The workshop participation included invited speakers and investigators currently funded in the material science program under the Human Exploration and Development of Space (HEDS) initiative. The conference featured a plenary session every day with an invited speaker that was followed by three parallel breakout sessions in subdisciplines. Attendance was close to 350 people, Posters were available for viewing during the conference and a dedicated poster session was held on the second day. Nanotechnology, radiation shielding materials, Space Station science opportunities, biomaterials research, and outreach and educational aspects of the program were featured in the plenary talks. This volume, the first to be released on CD-ROM for materials science, is comprised of the research reports submitted by the Principal Investigators at the conference.

Using Soft Sculpture Microfossils and Other Crafted Models to Teach Geoscience

NASA Astrophysics Data System (ADS)

Spinak, N. R.

2017-12-01

For the past 5 years, the International Ocean Discovery Program (IODP) has been using the author's sewn models of microfossils to help learners understand the shapes and design of these tiny fossils. These tactile objects make the study of ancient underwater life more tangible. Multiple studies have shown that interactive models can help many learners understand science. The Montessori and Waldorf education programs are based in large part on earlier insights into meeting these needs. The act of drawing has been an essential part of medical education. The STEAM (Science, Technology, Engineering, Arts and Math) movement has advocated for STEM supporters to recognize the inseparability of science and art. This presentation describes how the author's knitted or sewn models of microfossils incorporate art and design into geoscience education. The geoscience research and art processes used in developing and creating these educational soft sculptures will be described. In multiple entry points to science study, specific reciprocal benefits to boundary crossing among the arts and sciences for those who have primary talents in a particular area of study will be discussed. Geoscience education can benefit from using art and craft items such as models. Many websites now offer soft sculptures for biology study such as organs and germs (e.g. (https://www.giantmicrobes.com/us/main/nasty-germs). The Wortheim project involving community and crochet is another approach (http://crochetcoralreef.org/). These tactile artifacts give learners an entry-level experience with biology. Three dimensional models are multisensory. The enlarged manipulative microfossil models invite learners to make comparisons and gain insights when microscopes are not available or appropriate for the audience. Adding the physical involvement of creating a microfossil yourself increases the multi-sensory experience even further. Learning craft skills extends the cross-cutting concepts of the NGSS to a mutual relationship between science and art.

Bring Hidden Hazards to the Publics Attention, Understanding, and Informed Decision by Coordinating Federal Education Initiatives

NASA Astrophysics Data System (ADS)

Niepold, F.; Karsten, J. L.; Wei, M.; Jadin, J.

2010-12-01

In the 2010 National Research Council’s America’s Climate Choices’ report on Informing Effective Decisions and Actions Related to Climate Change concluded; “Education and communication are among the most powerful tools the nation has to bring hidden hazards to public attention, understanding, and action.” They conclude that the “current and future students, the broader public, and policymakers need to understand the causes, consequences, and potential solutions to climate change, develop scientific thinking and problem-solving skills, and improve their ability to make informed decisions.” The U.S. Global Change Research Program (USGCRP) works to integrate the climate related activities of these different agencies, with oversight from the Office of Science and Technology Policy and other White House offices. USGCRP’s focus is now on evaluating optimal strategies for addressing climate change risks, improving coordination among the Federal agencies, engaging stakeholders (including national policy leaders and local resource managers) on the research results to all and improving public understanding and decision-making related to global change. Implicit to these activities is the need to educate the public about the science of climate change and its consequences, as well as coordinate Federal investments related to climate change education. In a broader sense, the implementation of the proposed Interagency Taskforce on Climate Change Communication and Education will serve the evolving USGCRP mandates around cross-cutting, thematic elements, as recommended by the National Research Council (NRC, 2009) and the U.S. Climate Change Science Program Revised Research Plan: An update to the 2003 Strategic Plan (USGCRP, 2008), to help the Federal government “capitalize on its investments and aid in the development of increased climate literacy for the Nation.” This session will update the participants on the work to date and the near term coordinated plans of the proposed Interagency Taskforce on Climate Change Communication and Education.

Review of the Draft 2014 Science Mission Directorate Science Plan

NASA Technical Reports Server (NTRS)

2013-01-01

At the request of NASA's Science Mission Directorate (SMD), the National Research Council's (NRC's) Space Studies Board (SSB) initiated a study to review a draft of the SMD's 2014 Science Plan. The request for this review was made at a time when NASA is engaged in the final stages of a comprehensive, agency-wide effort to develop a new strategic plan and at a time when NASA's budget is under considerable stress. SMD's Science Plan serves to provide more detail on its four traditional science disciplines-astronomy and astrophysics, solar and space physics (also called heliophysics), planetary science, and Earth remote sensing and related activities-than is possible in the agency-wide Strategic Plan. In conducting its review of the draft Science Plan, the Committee on the Assessment of the NASA Science Mission Directorate 2014 Science Plan was charged to comment on the following specific areas: (1) Responsiveness to the NRC's guidance on key science issues and opportunities in recent NRC reports; (2) Attention to interdisciplinary aspects and overall scientific balance; (3) Identification and exposition of important opportunities for partnerships as well as education and public outreach; (4) Integration of technology development with the science program; (5) Clarity on how the plan aligns with SMD's strategic planning process; (6) General readability and clarity of presentation; and (7) Other relevant issues as determined by the committee. The main body of the report provides detailed findings and recommendations relating to the draft Science Plan. The highest-level, crosscutting issues are summarized here, and more detail is available in the main body of the report.

Update on ORNL TRANSFORM Tool: Simulating Multi-Module Advanced Reactor with End-to-End I&C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Richard Edward; Fugate, David L.; Cetiner, Sacit M.

2015-05-01

The Small Modular Reactor (SMR) Dynamic System Modeling Tool project is in the fourth year of development. The project is designed to support collaborative modeling and study of various advanced SMR (non-light water cooled reactor) concepts, including the use of multiple coupled reactors at a single site. The focus of this report is the development of a steam generator and drum system model that includes the complex dynamics of typical steam drum systems, the development of instrumentation and controls for the steam generator with drum system model, and the development of multi-reactor module models that reflect the full power reactormore » innovative small module design concept. The objective of the project is to provide a common simulation environment and baseline modeling resources to facilitate rapid development of dynamic advanced reactor models; ensure consistency among research products within the Instrumentation, Controls, and Human-Machine Interface technical area; and leverage cross-cutting capabilities while minimizing duplication of effort. The combined simulation environment and suite of models are identified as the TRANSFORM tool. The critical elements of this effort include (1) defining a standardized, common simulation environment that can be applied throughout the Advanced Reactors Technology program; (2) developing a library of baseline component modules that can be assembled into full plant models using available geometry, design, and thermal-hydraulic data; (3) defining modeling conventions for interconnecting component models; and (4) establishing user interfaces and support tools to facilitate simulation development (i.e., configuration and parameterization), execution, and results display and capture.« less

Intelligent transportation systems field operational test cross-cutting study : commercial vehicle operations -- roadside

DOT National Transportation Integrated Search

1998-11-01

Commercial Vehicle Operations - Roadside report discusses the findings and conclusions exclusively from Field Operational Tests (FOTs) of roadside Intelligent Transportation Systems (ITS) for Commercial Vehicle Operations (CVO). The FOTs considered i...

78 FR 13089 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane [[Page 13090

How Big Is Good? The Case for Cross-Cutting Ties

ERIC Educational Resources Information Center

Raynes, Norma V.

1977-01-01

Ways to provide the social advantages of the small group home with those of the larger institution are being utilized at one community-based residence serving 40 profoundly and severely mentally retarded children. (DB)

8. TURBINE DECK (UPPER FLOOR) INSIDE STEAM PLANT, SHOWING STEAM ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

8. TURBINE DECK (UPPER FLOOR) INSIDE STEAM PLANT, SHOWING STEAM TURBINES AND GENERATORS, LOOKING NORTH. November 13, 1990 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

78 FR 59415 - Formula Grants for Rural Areas: Guidance and Application Instructions

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-26

... project identified that fits in either Category A or B, FTA recommends the funds remain unobligated until... receive Tribal Transit funds, they must comply with certain cross-cutting requirements as listed in...

3. ORIGINAL THREE STEAM PLANT BOILERS ALONG WEST SIDE OF ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. ORIGINAL THREE STEAM PLANT BOILERS ALONG WEST SIDE OF STEAM PLANT BUILDING, FROM SOUTHWEST. November 13, 1990 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

The roles of the health sector and health workers before, during and after violent conflict.

PubMed

Buhmann, Caecilie; Barbara, Joanna Santa; Arya, Neil; Melf, Klaus

2010-01-01

Starting with a view of war as a significant population health problem, this article explores the roles of health workers in relation to violent conflict. Four different roles are identified, defined by goals and values--military, development, humanitarian and peace. In addition, four dimensions of health work are seen as cross-cutting factors influencing health work in violent conflict-- whether the health worker is an insider or outsider to the conflict, whether they are oriented to primary, secondary or tertiary prevention of the mortality and morbidity of war, whether they take an individual clinical or a population health approach, and whether they are oriented to policy and whole-sector change or not. This article explores the nature of these roles, the influence of these cross-cutting dimensions, the challenges of each role and finally commonalities and possibilities for cooperation between roles.

Regulatory cross-cutting topics for fuel cycle facilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denman, Matthew R.; Brown, Jason; Goldmann, Andrew Scott

This report overviews crosscutting regulatory topics for nuclear fuel cycle facilities for use in the Fuel Cycle Research & Development Nuclear Fuel Cycle Evaluation and Screening study. In particular, the regulatory infrastructure and analysis capability is assessed for the following topical areas: Fire Regulations (i.e., how applicable are current Nuclear Regulatory Commission (NRC) and/or International Atomic Energy Agency (IAEA) fire regulations to advance fuel cycle facilities) Consequence Assessment (i.e., how applicable are current radionuclide transportation tools to support risk-informed regulations and Level 2 and/or 3 PRA) While not addressed in detail, the following regulatory topic is also discussed: Integrated Security,more » Safeguard and Safety Requirement (i.e., how applicable are current Nuclear Regulatory Commission (NRC) regulations to future fuel cycle facilities which will likely be required to balance the sometimes conflicting Material Accountability, Security, and Safety requirements.)« less

Recommendations for Training in Pediatric Psychology: Defining Core Competencies Across Training Levels

PubMed Central

Janicke, David M.; McQuaid, Elizabeth L.; Mullins, Larry L.; Robins, Paul M.; Wu, Yelena P.

2014-01-01

Objective As a field, pediatric psychology has focused considerable efforts on the education and training of students and practitioners. Alongside a broader movement toward competency attainment in professional psychology and within the health professions, the Society of Pediatric Psychology commissioned a Task Force to establish core competencies in pediatric psychology and address the need for contemporary training recommendations. Methods The Task Force adapted the framework proposed by the Competency Benchmarks Work Group on preparing psychologists for health service practice and defined competencies applicable across training levels ranging from initial practicum training to entry into the professional workforce in pediatric psychology. Results Competencies within 6 cluster areas, including science, professionalism, interpersonal, application, education, and systems, and 1 crosscutting cluster, crosscutting knowledge competencies in pediatric psychology, are presented in this report. Conclusions Recommendations for the use of, and the further refinement of, these suggested competencies are discussed. PMID:24719239

Hanford Site Environmental Safety and Health Fiscal Year 2001 Budget-Risk management summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

REEP, I.E.

1999-05-12

The Hanford Site Environment, Safety and Health (ES&H) Budget-Risk Management Summary report is prepared to support the annual request to sites in the U.S. Department of Energy (DOE) Complex by DOE, Headquarters. The request requires sites to provide supplementary crosscutting information related to ES&H activities and the ES&H resources that support these activities. The report includes the following: (1) A summary status of fiscal year (FY) 1999 ES&H performance and ES&H execution commitments; (2)Status and plans of Hanford Site Office of Environmental Management (EM) cleanup activities; (3) Safety and health (S&H) risk management issues and compliance vulnerabilities of FY 2001more » Target Case and Below Target Case funding of EM cleanup activities; (4) S&H resource planning and crosscutting information for FY 1999 to 2001; and (5) Description of indirect-funded S&H activities.« less

Teaching Rocks and Minerals in the Context of Dynamic Earth Systems and Interactions: Using the Three Dimensions of the Next Generation Science Standards as an Organizing Framework to Engage Learners in Teacher Preparation Courses

NASA Astrophysics Data System (ADS)

Brady, M. E.; Nelson, F.

2014-12-01

The Next Generation Science Standards (NGSS) call for a shift from science learning as a fixed body of decontextualized facts toward a deliberate integration of three dimensions that transcend instructional level: 1) Disciplinary Core Ideas, 2) Crosscutting concepts, and 3) Science & Engineering Practices. This new approach to K-12 science education requires a dedicated effort to address teacher preparation in ESS. Here, we present an instructional model that explicitly integrates the three dimensions of the NGSS as an organizing framework in large-enrollment, undergraduate introductory geoscience courses targeted toward future teachers. This curriculum development is part of a campus-wide collaboration among science, engineering, and education faculty to enhance science teacher preparation. This approach reflects NGSS conceptual shifts and promotes a learner-centered environment where students regularly engage with each other and course material as part of the course: 1) In terms of content, Earth systems and interactions, are emphasized; rocks and minerals are discussed in the context of their use to understand and predict changes over Earth's past, present, and future; and engineering and technology are incorporated into discussions of mediating human impacts on Earth systems. 2) Cross-cutting concepts, such as cycles and flows, are explicitly referenced throughout the course to promote connections between and application of prior knowledge and new information or situations. 3) Guided by explicit prompts for partner discussions in class, students regularly engage in scientific practices, such as arguing by evidence and constructing an explanation. We will provide examples of student learning assessment, including in-class responses pre- and post- partner discussions, short written reflections, and cumulative projects. Ongoing evaluation of this instructional approach will include pre- and post- Geoscience Concept Inventory responses.

Medical Education Partnership Initiative (MEPI) in Zimbabwe: Outcomes and Challenges

PubMed Central

Hakim, James G; Chidzonga, Midion M; Borok, Margaret Z; Nathoo, Kusum J; Matenga, Jonathan; Havranek, Edward; Cowan, Frances; Abas, Melanie; Aagaard, Eva; Connors, Susan; Nkomani, Sanele; Ndhlovu, Chiratidzo E; Matsika, Antony; Barry, Michele; Campbell, Thomas B

2018-01-01

Background: Sub-Saharan Africa has an inadequate number of health professionals, leading to a reduced capacity to respond to health challenges, including HIV/AIDS. From 2010 to 2015, the Medical Education Partnership Initiative (MEPI)—sponsored by the U.S. Presidents Emergency Plan for AIDS Relief (PEPFAR) and the National Institutes of Health (NIH)—was enthusiastically taken up by the University of Zimbabwe College of Health Sciences (UZCHS) and 12 other sub-Saharan African universities to develop models of training to improve medical education and research capacity. In this article, we describe the outcomes and challenges of MEPI in Zimbabwe. Methods: UZCHS in partnership with the University of Colorado, Denver; Stanford University; University of Cape Town; University College London; and King's College London designed the Novel Education Clinical Trainees and Researchers (NECTAR) program and 2 linked awards addressing cardiovascular disease and mental health to pursue MEPI objectives. A range of medical education and research capacity-focused programs were implemented, including faculty development, research support, mentored scholars, visiting professors, community-based education, information and technology support, cross-cutting curricula, and collaboration with partner universities and the ministries of health and education. We analyzed quantitative and qualitative data from several data sources, including annual surveys of faculty, students, and other stakeholders; workshop exit surveys; and key informant interviews with NECTAR administrators and leaders and the UZCHS dean. Findings: Improved Internet connectivity and electronic resource availability were early successes of NECTAR. Over the 5-year period, 69% (115 of 166) of faculty members attended at least 1 of 15 faculty development workshops. Forty-one faculty members underwent 1-year advanced faculty development training in medical education and leadership. Thirty-three mentored research scholars were trained under NECTAR, and 52 and 12 in cardiovascular and mental health programs, respectively. Twelve MEPI scholars had joined faculty by 2015. Full-time faculty grew by 36% (122 to 166), annual postgraduate and medical student enrollment increased by 61% (75 to 121) and 71% (123 to 210), respectively. To institutionalize and sustain MEPI innovations, the Research Support Center and the Department of Health Professions Education were established at UZCHS. Conclusion: MEPI has synergistically revitalized medical education, research capacity, and leadership at UZCHS. Investments in creating a new research center, health professions education department, and, programs have laid the foundation to help sustain faculty development and research capacity in the country. PMID:29602867

2002 Microgravity Materials Science Conference

NASA Technical Reports Server (NTRS)

Gillies, Donald (Editor); Ramachandran, Narayanan (Editor); Murphy, Karen (Editor); McCauley, Dannah (Editor); Bennett, Nancy (Editor)

2003-01-01

The 2002 Microgravity Materials Science Conference was held June 25-26, 2002, at the Von Braun Center, Huntsville, Alabama. Organized by the Microgravity Materials Science Discipline Working Group, sponsored by the Physical Sciences Research Division, NASA Headquarters, and hosted by NASA Marshall Space Flight Center and member institutions under the Cooperative Research in Biology and Materials Science (CORBAMS) agreement, the conference provided a forum to review the current research and activities in materials science, discuss the envisioned long-term goals, highlight new crosscutting research areas of particular interest to the Physical Sciences Research Division, and inform the materials science community of research opportunities in reduced gravity. An abstracts book was published and distributed at the conference to the approximately 240 people attending, who represented industry, academia, and other NASA Centers. This CD-ROM proceedings is comprised of the research reports submitted by the Principal Investigators in the Microgravity Materials Science program.

Enhancing Diversity in Biomedical Data Science

PubMed Central

Canner, Judith E.; McEligot, Archana J.; Pérez, María-Eglée; Qian, Lei; Zhang, Xinzhi

2017-01-01

The gap in educational attainment separating underrepresented minorities from Whites and Asians remains wide. Such a gap has significant impact on workforce diversity and inclusion among cross-cutting Biomedical Data Science (BDS) research, which presents great opportunities as well as major challenges for addressing health disparities. This article provides a brief description of the newly established National Institutes of Health Big Data to Knowledge (BD2K) diversity initiatives at four universities: California State University, Monterey Bay; Fisk University; University of Puerto Rico, Río Piedras Campus; and California State University, Fullerton. We emphasize three main barriers to BDS careers (ie, preparation, exposure, and access to resources) experienced among those pioneer programs and recommendations for possible solutions (ie, early and proactive mentoring, enriched research experience, and data science curriculum development). The diversity disparities in BDS demonstrate the need for educators, researchers, and funding agencies to support evidence-based practices that will lead to the diversification of the BDS workforce PMID:28439180

Steps for Action : getting intelligent transportation systems ready for the year 2000

DOT National Transportation Integrated Search

1998-09-01

Hazardous Materials Incident Response Cross-Cutting report summarizes and interprets the results of three Field Operational Tests (FOTs) that are evaluating systems for improving the accuracy and availability of HazMat information provided to emergen...

Incident management successful practices : a cross-cutting study : improving mobility and saving lives

DOT National Transportation Integrated Search

2000-04-01

Incident management is the process of managing multi-agency, multi-jurisdictional responses to highway traffic disruptions. Efficient and coordinated management of incidents reduces their adverse impacts on public safety, traffic conditions, and the ...

Linked In

ERIC Educational Resources Information Center

Mayer, Kristen; Damelin, Daniel; Krajcik, Joseph

2013-01-01

The "Next Generation Science Standards" ("NGSS") emphasizes content and scientific practices, but what does this actually look like in a classroom? The "NGSS" integrates scientific and engineering practices with core ideas and crosscutting concepts, merging the three dimensions from "A Framework for K-12 Science…

Metropolitan transportation management center concepts of operation : a cross-cutting study : improving transportation network efficiency

DOT National Transportation Integrated Search

1999-10-01

The implementor and operator of a regional transportation management center (TMC) face a challenging task. Operators of TMCsthe primary point of coordination for managing transportation resourcestypically control millions of dollars of intellig...

Metropolitan ITS integration : a cross-cutting study : working together to improve transportation

DOT National Transportation Integrated Search

2002-08-01

The purpose of this report is to inform transportation managers and decision-makers of the value of Intelligent Transportation Systems (ITS) integration. The report is intended for operations and planning departments of transportation-related agencie...

4. STEAM PLANT MARINE BOILERS WEST OF STEAM PLANT AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

4. STEAM PLANT MARINE BOILERS WEST OF STEAM PLANT AND SOUTH OF ORIGINAL STEAM PLANT BOILERS, FROM SOUTH. November 13, 1990 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

5. STEAM PLANT COOLING TOWER LOCATED WEST OF STEAM PLANT ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. STEAM PLANT COOLING TOWER LOCATED WEST OF STEAM PLANT BUILDING, FROM SOUTH. SHOWS CURRENT LEVEL OF DISREPAIR. December 4, 1990 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

NETL Crosscutting Research Video Series – LIBSense™ Sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bhatt, Chet

NETL’s LIBSense™ Sensor is a small optical sensing device that can be used to detect elements in downhole applications. Since the sensor is an all-optical device and uses no electronics, it can be deployed into extreme environments.

Electronic credentialing for commercial vehicle operations : a cross-cutting analysis

DOT National Transportation Integrated Search

1999-06-10

This case study presents an analysis of how Maryland, Virginia, and Kentucky have used the Commercial Vehicle Information Systems & Networks (CVISN) Architecture to develop state CVISN systems designs for electronic credentialing. Focus is on the CVI...

New Mapping in the Sand Springs Range of Western Nevada Clarifies and Constrains Regional Deformation Sequences of the Luning-Fencemaker Thrust Belt

NASA Astrophysics Data System (ADS)

Czarnecki, S.; Jarvis, J.; Satterfield, J. I.

2016-12-01

The Sand Springs Range in western Nevada exposes Mesozoic through Cenozoic structures of the eastern Sierra Nevada, Luning-Fencemaker Thrust Belt (LFTB), Basin and Range province, and Walker Lane. A recent undergraduate geologic mapping project in the northern Sand Springs Range (nSSR) set out to map igneous intrusions in detail, specifically smaller intrusions which had not been a focus in previous work. This was accomplished using different techniques including mapping at a smaller scale (1:8000 vs. 1:24000), locating contacts and faults using handheld GPS, and focusing on relationships between metamorphic tectonites and igneous units. This revealed key cross-cutting relations between structures and diverse Triassic through Tertiary igneous rocks as well as distinctions between the nSSR and the surrounding LFTB assemblages. During our mapping we identified four metamorphic tectonite map units, Cretaceous granitoid and diorite plutons and sills, Tertiary rhyolite sills and dikes, and interbedded Tertiary basalt and ash flow tuff. The cross-cutting relations of these units overturn previously published sequences of events and constrain the timing of a deformation sequence which differs from the surrounding LFTB assemblages. We found that the nSSR contains three phases of deformation: a pre-LFTB syn-metamorphic event which achieved amphibolite facies that is not described elsewhere in the LFTB (D1), followed by two non-metamorphic folding and thrusting phases characteristic of the LFTB (D2 and D3). Our mapping provided four key timing constraints. First, D1 axial-planar cleavage (S1) deformed Triassic intrusions. Second, Cretaceous granitoid and diorite units cross-cut S1 foliation, D1 folds, and low-angle faults. Third, Cretaceous and Tertiary sills that locally terminate at a low-angle fault actually post-dated faulting. Fourth, cross-cutting relations showed a basaltic lava previously mapped as Jurassic is actually Tertiary. The large Sand Springs Pluton was the only intrusion mapped in detail during previous studies; but our mapping has demonstrated the importance of both small and large intrusions in understanding the overall structural history of a complex area. This project was supported by research grants from Angelo State University and the Southwest Section AAPG.

Addressing the Neglected Tropical Disease Podoconiosis in Northern Ethiopia: Lessons Learned from a New Community Podoconiosis Program

PubMed Central

Tomczyk, Sara; Tamiru, Abreham; Davey, Gail

2012-01-01

Background Despite its great public health importance, few control initiatives addressing podoconiosis (non-filarial elephantiasis, a geochemical neglected tropical disease) exist. In June 2010, the first podoconiosis program in Northern Ethiopia, consisting of prevention, awareness, and care and support activities, began in Debre Markos, Northern Ethiopia. This study aims to document and disseminate the lessons learned from a new community podoconiosis program in Debre Markos. Methods/Principal Findings We used a content analysis approach to examine and evaluate data from a series of sources. These sources include conducted interview transcripts, a focus group discussion transcript and secondary sources including monitoring and evaluation field reports, observation notes, and research obtained from a literature review. Themes were identified and grouped into matrix tables. Overall, sixteen program steps were identified and grouped into 6 domains: Initial preparation, training and sensitization, foundation building, treatment activity implementation, awareness, and follow-up. Emphasis is placed on the need for baseline data, effective training, local leadership, experience-sharing, mass-awareness, cross-cutting sector issues (i.e., water and waste management), and integration with government health systems. Related successes and challenges are also described, as are stakeholder roles and misconceptions and socio-cultural challenges affecting the program start-up. Many of the identified successes and challenges are relevant to the aim of the podoconiosis program to be sustainable and community-led. Conclusions/Significance Much of this information has already been used to improve the Debre Markos program. We also anticipate that the domains and steps identified will be useful in guiding new programs in other settings where podoconiosis is highly prevalent. We hope to encourage partnerships and collaboration among podoconiosis stakeholders in future growth and disease control expansion. PMID:22428078

Intelligent transportation systems field operational test cross-cutting study : emergency notification and response.

DOT National Transportation Integrated Search

1998-09-01

Emergency Notification and Response report summarizes and interprets the results of two Field Operational Tests (FOTs) that included emergency notification and response system components. The tests included in this report are: Colorado Mayday and Pug...

Advanced parking management systems : a cross-cutting study : taking the stress out of parking

DOT National Transportation Integrated Search

2007-01-01

This study examines advanced parking management systems (APMSs) in three venues: airports, central business districts, and transit park-and-ride locations. Specifically, the systems examined in this study provide directional and space availability in...

Archived data management systems : a cross-cutting study : linking operations and planning data

DOT National Transportation Integrated Search

2005-12-01

This report examines five transportation agencies that have established and are operating successful ADMSs (Archived Data Management Systems), and one that is on the verge of becoming fully operational. This study discusses the design choices, operat...

Intelligent transportation systems field operational test cross-cutting study : hazardous material incident management

DOT National Transportation Integrated Search

1994-08-01

This handbook was developed to assist design, traffic, and maintenance engineering personnel in making determinations about roadway delineation systems, including the appropriate system for a given situation, when a system has reached the end of its ...

Project-Based Science

ERIC Educational Resources Information Center

Krajcik, Joe

2015-01-01

Project-based science is an exciting way to teach science that aligns with the "Next Generation Science Standards" ("NGSS"). By focusing on core ideas along with practices and crosscutting concepts, classrooms become learning environments where teachers and students engage in science by designing and carrying out…

NETL Crosscutting Research Video Series – LIBSense™ Sensor (Short Version)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

NETL’s LIBSense™ Sensor is a small optical sensing device that can be used to detect elements in downhole applications. Since the sensor is an all-optical device and uses no electronics, it can be deployed into extreme environments.

Surface Habitat Systems

NASA Technical Reports Server (NTRS)

Kennedy, Kriss J.

2009-01-01

The Surface Habitat Systems (SHS) Focused Investment Group (FIG) is part of the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) effort to provide a focused direction and funding to the various projects that are working on human surface habitat designs and technologies for the planetary exploration missions. The overall SHS-FIG effort focuses on directing and guiding those projects that: 1) develop and demonstrate new surface habitat system concepts, innovations, and technologies to support human exploration missions, 2) improve environmental systems that interact with human habitats, 3) handle and emplace human surface habitats, and 4) focus on supporting humans living and working in habitats on planetary surfaces. The activity areas of the SHS FIG described herein are focused on the surface habitat project near-term objectives as described in this document. The SHS-FIG effort focuses on mitigating surface habitat risks (as identified by the Lunar Surface Systems Project Office (LSSPO) Surface Habitat Element Team; and concentrates on developing surface habitat technologies as identified in the FY08 gap analysis. The surface habitat gap assessment will be updated annually as the surface architecture and surface habitat definition continues to mature. These technologies are mapped to the SHS-FIG Strategic Development Roadmap. The Roadmap will bring to light the areas where additional innovative efforts are needed to support the development of habitat concepts and designs and the development of new technologies to support of the LSSPO Habitation Element development plan. Three specific areas of development that address Lunar Architecture Team (LAT)-2 and Constellation Architecture Team (CxAT) Lunar habitat design issues or risks will be focused on by the SHS-FIG. The SHS-FIG will establish four areas of development that will help the projects prepare in their planning for surface habitat systems development. Those development areas are the 1) surface habitat concept definition, 2) inflatable surface habitat development, and 3) autonomous habitat operations, and 4) cross-cutting / systems engineering. In subsequent years, the SHS-FIG will solicit a call for innovations and technologies that will support the development of these four development areas. The other development areas will be assessed yearly and identified on the SHS-FIG s Strategic Development Roadmap. Initial investment projects that are funded by the Constellation Program Office (CxPO), LSSPO, or the Exploration Technology Development Projects (ETDP) will also be included on the Roadmap. For example, in one or two years from now, the autonomous habitat operations and testbed would collaborations with the Integrated Systems Health Management (ISHM) and Automation for Operations ETDP projects, which will give the surface habitat projects an integrated habitat autonomy testbed to test software and systems. The SHS-FIG scope is to provide focused direction for multiple innovations, technologies and subsystems that are needed to support humans at a remote planetary surface habitat during the concept development, design definition, and integration phases of that project. Subsystems include: habitability, lightweight structures, power management, communications, autonomy, deployment, outfitting, life support, wireless connectivity, lighting, thermal and more.

Lessons learnt from the introduction of the contraceptive implant in South Africa

PubMed

Pleaner, M; Morroni, C; Smit, J; Lince-Deroche, N; Chersich, M; Mullick, S; Pillay, D; Makua, M; Rees, H

2017-10-01

In 2014, South Africa (SA) introduced the subdermal contraceptive implant with the aim of expanding the contraceptive method mix and availability of long-acting reversible methods in the public sector. Three years on, concerns have been raised about the decline in uptake, early implant removals and challenges in service delivery. This article explores the lessons learnt from the introduction of contraceptive technologies elsewhere and applies these to the SA context. Drawing on the World Health Organization’s conceptual framework for the introduction of new contraceptive methods, and subsequent literature on the topic, lessons are classified into six cross-cutting themes. Recommendations highlight the need for SA to review and explore strategies to strengthen current implant services, including the provision of improved provider training aimed at sensitive, client-centred approaches; increased community engagement; and improved systems for programmatic monitoring and evaluation. With implementation of these recommendations, worrying trends in the provision of implants could be reversed. Creative Commons Attribution - NonCommercial Works License (CC BY-NC 4.0)

Electrodialytic 2-compartment cells for emerging organic contaminants removal from effluent.

PubMed

Ferreira, Ana Rita; Couto, Nazaré; Guedes, Paula; Pinto, Joana; Mateus, Eduardo P; Ribeiro, Alexandra B

2018-04-27

The present work discusses the efficiency of the electrodialytic (ED) process to remove emerging organic contaminants (EOCs) from effluent. The ED process was carried out in a cell of two-compartments (2 C-cell) with effluent in either the anode or cathode compartment, separated from the electrolyte compartment through an anion or a cation exchange membrane (AEM and CEM, respectively). As effluent destination might be soil irrigation, and having in mind the nutrient recycling, phosphorus was also monitored in the process. The ED removals showed to be dependent of EOCs characteristics and cell design. Removals were higher when using an AEM (60-72%) than a CEM (8-63%), except for caffeine when the effluent was placed in the cathode, that did not show any removal. When using an AEM with the effluent placed in the anode compartment, all the EOCs (including caffeine) were removed between 57-72%, mainly through electrodegradation phenomena. Regarding phosphorus, a polarity switch may be done to a 2 C-cell with a AEM, depending on the effluent final use. This technology is still in its first steps and, in both cases, further optimization of ED parameters is needed. Still, this technological innovation and cross-cutting research envisages the promotion of economic, social and environmental benefits. Copyright © 2018 Elsevier B.V. All rights reserved.

Plans, Trains, and Automobiles: Big River Crossing Issues in a Small Community

DOT National Transportation Integrated Search

1999-01-01

This paper addresses cross-cutting topics associated with the replacement of a : regional Mississippi River crossing along the Great River Road. The breadth and : depth of issues define the ease with which transportation problems can be solved. : In ...

Incident Management : Successful Practices : A Cross-Cutting Study : Improving Mobility And Saving Lives

DOT National Transportation Integrated Search

2012-08-01

This report presents the test plan for conducting the Traveler Response Analysis for the United States Department of Transportation (U.S. DOT) evaluation of the Dallas U.S. 75 Integrated Corridor Management (ICM) Initiative Demonstration. The ICM pro...

Tool Enlarges Hard-to-Reach Holes

NASA Technical Reports Server (NTRS)

Geddes, J. P.

1984-01-01

Tool centers itself and cuts precise depth. Tool consists of crosscut carbide bur; sleeve that serves as depth stop and pilot; length of flexible, strong piano wire; and standard drive socket. Parts brazed together. Piano wire transmits torque and axial force to cutting tool.

CROSS-CUTTING QA ISSUES INVOLVING GEOSPATIAL SCIENCES, CHEMISTRY, INFORMATION MANAGEMENT, AND LAW

EPA Science Inventory

The Agency spends hundreds of millions of dollars annually collecting and processing environmental data for scientific research and regulatory decision making. In addition, the regulated community may spend as much or more each year responding to Agency compliance requirements. ...

Intelligent transportation systems field operational test cross-cutting study incident management : detection, verification, and traffic management

DOT National Transportation Integrated Search

2000-01-01

Although the effects of climatic factors on pavement performance have long been recognized as important, those effects remain largely unquantified because individual pavement research projects to date generally have been restricted to limited geograp...

14. VIEW WEST, DETAIL OF MITTER SILL, SHOWING MISSING PLANKS ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

14. VIEW WEST, DETAIL OF MITTER SILL, SHOWING MISSING PLANKS - Bald Eagle Cross-Cut Canal Lock, North of Water Street along West Branch of Susquehanna River South bank, 500 feet East of Jay Street Bridge, Lock Haven, Clinton County, PA

A Virtuous Cycle

ERIC Educational Resources Information Center

Furtak, Erin Marie; Heredia, Sara C.

2016-01-01

The "Next Generation Science Standards" (NGSS Lead States 2013) lay out an ambitious agenda for students to simultaneously engage with disciplinary core ideas, crosscutting concepts, and scientific practices. This does not just mean new expectations for teaching; it also requires new formative assessments. In contrast to summative…

Shared Resources: Sharing Right-Of-Way For Telecommunications, Identification, Review And Analysis Of Legal And Institutional Issues, Final Report

DOT National Transportation Integrated Search

1998-09-01

Commercial Vehicle Administrative (CVO) Processes Cross-Cutting report summarizes and interprets the results of several Field Operational Tests (FOTs) conducted to evaluate systems that increase the efficiency of commercial vehicle administrative pro...

Intelligent transportation systems field operational test cross-cutting study : commercial vehicle administrative processes

DOT National Transportation Integrated Search

1999-10-01

This analysis brief explores differences and similarities among the national crash experience of combination-unit trucks (CUTs), single-unit trucks (SUTs), and "all vehicles" (principally cars and light truck/vans). These CUT vs. SUT vs. all vehicle ...

Intelligent transportation systems field operational test cross-cutting study : emergency notification and response

DOT National Transportation Integrated Search

2000-08-01

Transportation is vital to the social and economic health of the nation. Surface transportation systems ? the networks of highways, local streets, bus routes, and rail lines ? are the ties that bind communities and facilitate commerce. Despite the fa...

Diagenesis of the Lisburne Group, northeastern Brooks Range, Alaska

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carlson, R.C.; Goldstein, R.H.; Enos, P.

1995-05-01

Petrographic cathodoluminescence studies of the cement stratigraphy of the Lisburne Group yield insights on its diagenetic history. Crosscutting relationships between features of subaerial exposure and calcite cements show that early generations of nonferroan, nonluminescent and multibanded-luminescent calcites are synchronous with or postdated by subaerial exposure surfaces within the Lisburne. Surfaces of subaerial exposure occur at 18 horizons within the Lisburne and are distinguished by features as laminated crusts, rhizoliths, autoclastic breccia, fissure fills, mud cracks, and erosional surfaces. Crosscutting relationships also occur between calcite cements and clasts in karst breccias and conglomerates that formed along the sub-Permian unconformity at themore » top of the Lisburne. The sub-Permian unconformity postdates later generations of calcite cement. These cements formed in the following sequence: nonferroan to low-ferroan, dully luminescent calcite; ferroan, very-dully luminescent calcite; and second generation of nonferroan, multibanded calcite. The crosscutting relationships not only constrain the timing of cement precipitation, but also suggest that the cements probably were precipitated from meteoric groundwaters introduced during subaerial exposure of the Lisburne platform. Late cements in the Lisburne postdate the Permian Echooka Formation. These cements are low-ferroan, moderately-bright to dully luminescent calcite, followed by a second generation of ferroan, very-dully luminescent calcite. Features of compaction and pressure solution are coincident with the precipitation of the late ferroan calcite and further constrain its timing to deep burial of the Lisburne. The youngest phase of calcite cement precipitated in the Lisburne Group is nonferroan, very-dully luminescent calcite. It commonly fills tectonically-induced shear fractures, indicating precipitation after the onset of Cretaceous (and/or Cenozoic) tectonism in the northeastern Brooks Range.« less

Planning Instruction to Meet the Intent of the Next Generation Science Standards

NASA Astrophysics Data System (ADS)

Krajcik, Joseph; Codere, Susan; Dahsah, Chanyah; Bayer, Renee; Mun, Kongju

2014-03-01

The National Research Council's Framework for K- 12 Science Education and the Next Generation Science Standards (NGSS Lead States in Next Generation Science Standards: For states, by states. The National Academies Press, Washington, 2013) move teaching away from covering many isolated facts to a focus on a smaller number of disciplinary core ideas (DCIs) and crosscutting concepts that can be used to explain phenomena and solve problems by engaging in science and engineering practices. The NGSS present standards as knowledge-in-use by expressing them as performance expectations (PEs) that integrate all three dimensions from the Framework for K- 12 Science Education. This integration of core ideas, practices, and crosscutting concepts is referred to as three-dimensional learning (NRC in Division of Behavioral and Social Sciences and Education. The National Academies Press, Washington, 2014). PEs state what students can be assessed on at the end of grade level for K-5 and at the end of grade band for 6-8 and 9-12. PEs do not specify how instruction should be developed nor do they serve as objectives for individual lessons. To support students in developing proficiency in the PEs, the elements of the DCIs will need to be blended with various practices and crosscutting concepts. In this paper, we examine how to design instruction to support students in meeting a cluster or "bundle" of PEs and how to blend the three dimensions to develop lesson level PEs that can be used for guiding instruction. We provide a ten-step process and an example of that process that teachers and curriculum designers can use to design lessons that meet the intent of the Next Generation of Science Standards.

Calcination/dissolution chemistry development Fiscal year 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delegard, C.H.

1995-09-01

The task {open_quotes}IPC Liaison and Chemistry of Thermal Reconstitution{close_quotes} is a $300,000 program that was conducted in Fiscal Year (FY) 1995 with U.S. Department of Energy (DOE) Office of Research and Development (EM-53) Efficient Separations and Processing Crosscutting Program supported under technical task plan (TTP) RL4-3-20-04. The principal investigator was Cal Delegard of the Westinghouse Hanford Company (WHC). The task encompassed the following two subtasks related to the chemistry of alkaline Hanford Site tank waste: (1) Technical Liaison with the Institute of Physical Chemistry of the Russian Academy of Science (IPC/RAS) and its research into the chemistry of transuranic elementsmore » (TRU) and technetium (Tc) in alkaline media. (2) Laboratory investigation of the chemistry of calcination/dissolution (C/D) (or thermal reconstitution) as an alternative to the present reference Hanford Site tank waste pretreatment flowsheet, Enhanced Sludge Washing (ESW). This report fulfills the milestone for the C/D subtask to {open_quotes}Provide End-of-Year Report on C/D Laboratory Test Results{close_quotes} due 30 September 1995. A companion report, fulfilling the milestone to provide an end-of-year report on the IPC/RAS liaison, also has been prepared.« less

The Gateway Paper--preventive and promotive programs in Pakistan and health reforms in Pakistan.

PubMed

Nishtar, Sania

2006-12-01

Pakistan's public health interventions include a range of programs lead by the federal government with implementation arms at the provincial and district levels. Some of the programs are disease specific such as the respective programs on HIV/AIDS, Malaria, Tuberculosis, non-communicable diseases and Hepatitis; others are specific to life cycle domains such as in the case of maternal and child health whereas still others such as the National Program for Family Planning and Primary Healthcare and the National Expanded Program for Immunization are cross-cutting. Although these programs have contributed to improving health outcomes at intermediate outcomes level, a number of critical impediments to maximizing their impact have been noted. These include lack of integration, institutional impediments to the implementation of programs with particular reference to problems at the federal/provincial level and unrealized implications of federal programs at the provincial level are amongst the foremost. These have been further compounded by the addition of another service delivery tier in Pakistan's health system through the introduction of the devolution initiative. Furthermore, the unsustainable and under-utilized BHUs which serve as the service delivery base of these programs add to the problems. The Gateway Paper makes a number of recommendations to obviate these issues such as recommendations to integrate programs, strengthen surveillance systems, and with reference to obviating issues to implementation, emphasis is laid on decentralizing decision-making and central control, institutionalizing managerial audit, and prioritizing specific governance and management reforms. The Paper also stresses on the need for establishing a national coordination mechanism for fostering federal/provincial harmony and ensuring the creation of appropriate counterpart institutional arrangements in the provinces and districts. Recommendations on restructuring BHUs at a management, oversight, quality related and community participation level will play a vital role in determining the manner in which the efficiency of these public health programs can be enhanced.

Science for Society Workshop Summary Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wolfe, Amy K; Bjornstad, David J; Lenhardt, W Christopher

Science for Society, a workshop held at the Oak Ridge National Laboratory (ORNL) on September 27, 20111, explored ways to move Laboratory science toward use. It sought actionable recommendations. Thus the workshop focused on: (1) current practices that promote and inhibit the translation of science into use, (2) principles that could lead to improving ORNL's translational knowledge and technology transfer efforts, and (3) specific recommendations for making these principles operational. This highly interactive workshop struck a positive chord with participants, a group of 26 ORNL staff members from diverse arenas of science and technology (S and T), technology transfer, andmore » external laboratory relations, who represented all levels of science, technology, and management. Recognizing that the transformation of fundamental principles into operational practices often follows a jagged path, the workshop sought to identify key choices that could lead to a smoother journey along this path, as well as choices that created roadblocks and bottlenecks. The workshop emphasized a portion of this pathway, largely excluding the marketplace. Participants noted that research translation includes linkages between fundamental and applied research and development (R and D), and is not restricted to uptake by manufacturers, consumers, or end users. Three crosscutting ideas encapsulate workshop participants observations: (1) ORNL should take more action to usher the translation of its S and T products toward use, so as to make a positive national and global impact and to enhance its own competitiveness in the future; (2) ORNL (and external entities such as DOE and Congress) conveys inconsistent messages with regard to the importance of research translation and application, which (a) creates confusion, (b) poses disincentives to pursue research translation, (c) imposes barriers that inhibit cross-fertilization and collaboration, and (d) diminishes the effectiveness of both the science mission and the translation of that science for use; and (3) ORNL should design its commitments and actions for helping move science from the Laboratory toward use to align with one another and should integrate them into its institutional culture in such a way as to elevate research translation and application to coequal status with scientific excellence. Participants made several actionable recommendations for enhancing research translation at ORNL, some of which were particular to specific S and T domains. Among the recommendations that participants agreed apply Lab-wide are to: align metrics and incentives with research translation goals; manage risks and conflicts of interest instead of avoiding them; and create programs (e.g., entrepreneurial leave) that promote interactions between key ORNL staff and industry in ways that complement careers at ORNL.« less

Integrating the New Generation Science Standards (NGSS) into K- 6 teacher training and curricula

NASA Astrophysics Data System (ADS)

Pinter, S.; Carlson, S. J.

2017-12-01

The Next Generation Science Standards is an initiative, adopted by 26 states, to set national education standards that are "rich in content and practice, arranged in a coherent manner across disciplines and grades to provide all students an internationally benchmarked science education." Educators now must integrate these standards into existing curricula. Many grade-school (K-6) teachers face a particularly daunting task, as they were traditionally not required to teach science or only at a rudimentary level. The majority of K-6 teachers enter teaching from non-science disciplines, making this transition even more difficult. Since the NGSS emphasizes integrated and coherent progression of knowledge from grade to grade, prospective K-6 teachers must be able to deliver science with confidence and enthusiasm to their students. CalTeach/MAST (Mathematics and Science Teaching Program) at the University of California Davis, has created a two-quarter sequence of integrated science courses for undergraduate students majoring in non-STEM disciplines and intending to pursue multiple-subject K-6 credentials. The UCD integrated science course provides future primary school teachers with a basic, but comprehensive background in the physical and earth/space sciences. Key tools are taught for improving teaching methods, investigating complex science ideas, and solving problems relevant to students' life experiences that require scientific or technological knowledge. This approach allows prospective K-6 teachers to explore more effectively the connections between the disciplinary core ideas, crosscutting concepts, and scientific and engineering practices, as outlined in the NGSS. In addition, they develop a core set of science teaching skills based on inquiry activities and guided lab discussions. With this course, we deliver a solid science background to prospective K-6 teachers and facilitate their ability to teach science following the standards as articulated in the NGSS.

Crosscutting Development- EVA Tools and Geology Sample Acquisition

NASA Technical Reports Server (NTRS)

2011-01-01

Exploration to all destinations has at one time or another involved the acquisition and return of samples and context data. Gathered at the summit of the highest mountain, the floor of the deepest sea, or the ice of a polar surface, samples and their value (both scientific and symbolic) have been a mainstay of Earthly exploration. In manned spaceflight exploration, the gathering of samples and their contextual information has continued. With the extension of collecting activities to spaceflight destinations comes the need for geology tools and equipment uniquely designed for use by suited crew members in radically different environments from conventional field geology. Beginning with the first Apollo Lunar Surface Extravehicular Activity (EVA), EVA Geology Tools were successfully used to enable the exploration and scientific sample gathering objectives of the lunar crew members. These early designs were a step in the evolution of Field Geology equipment, and the evolution continues today. Contemporary efforts seek to build upon and extend the knowledge gained in not only the Apollo program but a wealth of terrestrial field geology methods and hardware that have continued to evolve since the last lunar surface EVA. This paper is presented with intentional focus on documenting the continuing evolution and growing body of knowledge for both engineering and science team members seeking to further the development of EVA Geology. Recent engineering development and field testing efforts of EVA Geology equipment for surface EVA applications are presented, including the 2010 Desert Research and Technology Studies (Desert RATs) field trial. An executive summary of findings will also be presented, detailing efforts recommended for exotic sample acquisition and pre-return curation development regardless of planetary or microgravity destination.

Embedded Sensors and Controls to Improve Component Performance and Reliability -- Loop-scale Testbed Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melin, Alexander M.; Kisner, Roger A.

2016-09-01

Embedded instrumentation and control systems that can operate in extreme environments are challenging to design and operate. Extreme environments limit the options for sensors and actuators and degrade their performance. Because sensors and actuators are necessary for feedback control, these limitations mean that designing embedded instrumentation and control systems for the challenging environments of nuclear reactors requires advanced technical solutions that are not available commercially. This report details the development of testbed that will be used for cross-cutting embedded instrumentation and control research for nuclear power applications. This research is funded by the Department of Energy's Nuclear Energy Enabling Technologymore » program's Advanced Sensors and Instrumentation topic. The design goal of the loop-scale testbed is to build a low temperature pump that utilizes magnetic bearing that will be incorporated into a water loop to test control system performance and self-sensing techniques. Specifically, this testbed will be used to analyze control system performance in response to nonlinear and cross-coupling fluid effects between the shaft axes of motion, rotordynamics and gyroscopic effects, and impeller disturbances. This testbed will also be used to characterize the performance losses when using self-sensing position measurement techniques. Active magnetic bearings are a technology that can reduce failures and maintenance costs in nuclear power plants. They are particularly relevant to liquid salt reactors that operate at high temperatures (700 C). Pumps used in the extreme environment of liquid salt reactors provide many engineering challenges that can be overcome with magnetic bearings and their associated embedded instrumentation and control. This report will give details of the mechanical design and electromagnetic design of the loop-scale embedded instrumentation and control testbed.« less

Design Experiments in Educational Research.

ERIC Educational Resources Information Center

Cobb, Paul; Confrey, Jere; diSessa, Andrea; Lehrer, Richard; Schauble, Leona

2003-01-01

Indicates the range of purposes and variety of settings in which design experiments have been conducted, delineating five crosscutting features that collectively differentiate design experiments from other methodologies. Clarifies what is involved in preparing for and carrying out a design experiment and in conducting a retrospective analysis of…

Intelligent Transportation Systems In Work Zones: A Cross-Cutting Study

DOT National Transportation Integrated Search

2002-11-01

Work zones cause congestion, and result in more than 800 fatalities and 37,000 injuries in the U.S. every year. However, as our infrastructure ages, there is an increasing need for the maintenance and rehabilitation of our roadways, which means more ...

Communications for intelligent transportation systems, successful practices : a cross-cutting study : reaching cost-effective solutions through better decision-making techniques

DOT National Transportation Integrated Search

2000-11-01

In many intelligent transportation systems (ITS) implementations, the telecommunications solution was arrived at without the kind of rigorous examination that would have accompanied similarly significant and complex technical/business choices. The pu...

ITS applications for coordinating and improving human services transportation : a cross-cutting study : improving service for the transportation disadvantaged

DOT National Transportation Integrated Search

2006-08-01

Older adults, persons with disabilities, and individuals with lower incomes frequently do not have access to transportation or their access to transportation is limited. These populations, called "transportation disadvantaged," need flexible yet depe...

Age Discrimination, Social Closure and Employment

ERIC Educational Resources Information Center

Roscigno, Vincent J.; Mong, Sherry; Byron, Reginald; Tester, Griff

2007-01-01

Age discrimination in employment has received mounting attention over the past two decades, and from various cross-cutting social science disciplines. Findings from survey and experimental analyses have revealed the pervasiveness of ageist stereotypes, while aggregate and life course analyses suggest trends toward downward occupational mobility…

Energy Tracking Diagrams

ERIC Educational Resources Information Center

Scherr, Rachel E.; Harrer, Benedikt W.; Close, Hunter G.; Daane, Abigail R.; DeWater, Lezlie S.; Robertson, Amy D.; Seeley, Lane; Vokos, Stamatis

2016-01-01

Energy is a crosscutting concept in science and features prominently in national science education documents. In the "Next Generation Science Standards," the primary conceptual learning goal is for learners to conserve energy as they "track" the transfers and transformations of energy within, into, or out of the system of…

ITS architecture development : a cross-cutting study : electronic credentialing for commercial vehicle operations : building a framework for ITS integration

DOT National Transportation Integrated Search

1999-07-01

This report presents an examination of the process used in preparing electronic credentials for commercial vehicle operations in Kentucky Maryland, and Virginia. It describes the experience of using the Commercial Vehicle Information Systems & Networ...

Research | Energy Systems Integration Facility | NREL

Science.gov Websites

levels of variable supply and demand? How do we keep the lights on and the fuel flowing in a world of , regulatory frameworks, and value propositions for consumers in this changing world? NREL's crosscutting Partner with our world-class researchers Work

Introduction: the Interdisciplinary Nursing Quality Research Initiative.

PubMed

Naylor, Mary D; Lustig, Adam; Kelley, Heather J; Volpe, Ellen M; Melichar, Lori; Pauly, Mark V

2013-04-01

The Robert Wood Johnson Foundation launched the Interdisciplinary Nursing Quality Research Initiative (INQRI) program in 2005 to generate, disseminate, and translate research to understand how nurses contribute to and can improve patient care quality. This special edition of Medical Care provides an overview of the program's strategy, goals, and impact, highlighting cross-cutting issues addressed by the initiative. INQRI's leadership and select grantees discuss the implications of a collection of studies on the following: advances in the science of nursing's contribution to quality, measurement of quality, interdisciplinary collaboration, implementation methodology, dissemination and translation of findings, and the business case for nursing. A comprehensive review of the scholarly literature published in 2004 and 2009 found that the evidence linking nursing to quality of care has grown. The second paper discusses INQRI's work on measurement of quality of care, revealing the need for additional comprehensive measures. The third paper examines INQRI's focus on interdisciplinary collaboration, finding that it can enhance methodological approaches and result in substantive changes in health delivery systems. The fourth paper presents methodological challenges faced in health care implementation, emphasizing the need for standardized terms and research designs. The fifth paper addresses INQRI's commitment to translating research into practice, illustrating dissemination strategies and lessons learned. The final paper discusses how the INQRI program has contributed to the current evidence regarding the business case for nursing. This supplement describes the accomplishments of the INQRI program, discusses current issues in research design and implementation, and places INQRI research within the larger context regarding advances in nursing science.

DEVELOPMENT OF EMERGING TECHNOLOGIES WITHIN THE SITE PROGRAM

EPA Science Inventory

The Site Program is formed by five research programs: the Demonstration Program, the Emerging Technology Program, the Measurement and Monitoring Technology Development Program, the Innovative Technology Program, and the Technology Transfer Program. The Emerging Technology (ET) P...

Anticipating the Future, Influencing the Present: Assessing the Societal Implications of Emerging Technologies

NASA Astrophysics Data System (ADS)

Michelson, Evan S.

A growing challenge for the American policymaking system is to respond effectively to a wide range of interconnected, complex, long-term science and technology issues. Simultaneously, current approaches and institutions of governance are ill suited to address these multidimensional challenges. As the next generation of innovations in science and technology is arriving at an accelerating rate, the governance system is lagging behind. This realization leads to a vital overarching consideration that steers this study: What approaches are well suited to anticipate the longer-term societal implications of emerging technologies in the 21st Century? This study identifies and examines strategies for anticipating the longer-term societal implications of emerging technologies by way of a qualitative case study. It explores one area of technology (nanotechnology), in one particular governance system (the United States), and with a focus on one high profile non-governmental organization (NGO) involved in addressing a range of nanotechnology's societal and policy implications: the Project on Emerging Nanotechnologies (PEN). Based at the Woodrow Wilson International Center for Scholars, PEN's goal was to ensure "that as nanotechnologies advance, possible risks are minimized, public and consumer engagement remains strong, and the potential benefits of these new technologies are realized." The conceptual framework of anticipatory governance guides the research, which offers a real-world example about how anticipatory governance applies in the nongovernmental sector and shows how this idea links to broader theoretical debates about the policymaking process. The study's main conclusion is that PEN utilized a set of interconnected strategies related to advancing foresight, operating in a boundary-spanning role, and promoting communications and public engagement in its attempt to influence, anticipate, and shape the societal implications of emerging technologies. The findings are informed by evidence from a range of sources, including document analysis, semi-structured interviews, and multiple media analyses. Finally, this study highlights a set of cross-cutting, transferable lessons that can be applied as future emerging technologies arise over time. The intention is that the insights gained from this study can help address these pressing issues as they rapidly unfold.

Design of thin shear blades for crosscut shearing of wood.

Treesearch

Rodger A. Arola; Thomas R. Grimm

1974-01-01

Discusses principles and presents formulations for evaluating the elastic stability of thin plates subjected to edge loadings. Three different prestress methods to increase late stability are presented. A procedure is given to evaluate the elastic stability of thin shear blades under expected shearing loads.

LCIA framework and cross-cutting issues guidance within the UNEP/SETAC Life Cycle Initiative

EPA Science Inventory

Increasing needs for decision support and advances in scientific knowledge within life cycle assessment (LCA) led to substantial efforts to provide global guidance on environmental life cycle impact assessment (LCIA) indicators under the auspices of the UNEP-SETAC Life Cycle Init...

Veins in Silicates of IIE Iron Mont Dieu II: Melt Migration Caused by Impact?

NASA Astrophysics Data System (ADS)

Van Roosbroek, N.; Debaille, V.; Pittarello, L.; Hecht, L.; Claeys, Ph.

2014-09-01

Mont Dieu II is a ~450kg meteorite classified as IIE iron. The primitive silicate inclusions can be linked to the H-chondrites. Thick metal veins with angular clasts crosscut these inclusions and could point to an impact-melt migration formation.

Developing + Using Models in Physics

ERIC Educational Resources Information Center

Campbell, Todd; Neilson, Drew; Oh, Phil Seok

2013-01-01

Of the eight practices of science identified in "A Framework for K-12 Science Education" (NRC 2012), helping students develop and use models has been identified by many as an anchor (Schwarz and Passmore 2012; Windschitl 2012). In instruction, disciplinary core ideas, crosscutting concepts, and scientific practices can be meaningfully…

Intelligent transportation systems assessment of ITS deployment : review of metropolitan areas : dscussions of crosscutting issues

DOT National Transportation Integrated Search

2000-08-01

The study on which this report is based sought to compile data on both accelerated and natural exposure of coating and corrosion test panels and then to relate their deterioration to environmental conditions. The report presents data gathered over a ...

Epistemic Practices of Engineering for Education

ERIC Educational Resources Information Center

Cunningham, Christine M.; Kelly, Gregory J.

2017-01-01

Engineering offers new educational opportunities for students, yet also poses challenges about how to conceptualize the disciplinary core ideas, crosscutting concepts, and science and engineering practices of the disciplinary fields of engineering. In this paper, we draw from empirical studies of engineering in professional and school settings to…

C[superscript 2] = BOK: Two Apparel Studies' Capstone Courses Incorporating the Body of Knowledge

ERIC Educational Resources Information Center

Smith, Kathleen R.; Apple, Laurie; Souhtward, Leigh

2014-01-01

Guided by the five cross-cutting themes of the American Association of Family & Consumer Sciences (AAFCS) Body of Knowledge (BOK) two capstone courses (C[superscript 2]) in Apparel Studies were designed to help prepare students for careers, further study, or both.

Hybrid Electric Vehicle Publications | Transportation Research | NREL

Science.gov Websites

evaluations. Delivery Vehicles Cross-Cutting Publications Battery Ownership Model: Medium-Duty HEV Battery . (2015) Coca-Cola Delivery Trucks Coca-Cola Refreshments Class 8 Hybrid Electric Tractor Evaluation: 13 Dynamometer Evaluation and Comparison of Class 7 Hybrid Electric and Conventional Diesel Delivery Trucks

22. STEAM PLANT TURBINE DECK FROM SOUTH END OF BUILDING, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

22. STEAM PLANT TURBINE DECK FROM SOUTH END OF BUILDING, SHOWING TOPS OF DIESEL ENGINES AT FAR NORTH END, PRIOR TO INSTALLATION OF STEAM UNIT NO. 4. Ca. 1948 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

Exploring the Science Framework

ERIC Educational Resources Information Center

Bell, Philip; Bricker, Leah; Tzou, Carrie; Lee, Tiffany; Van Horne, Katie

2012-01-01

The National Research Council's recent publication "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011), which is the foundation for the Next Generation Science Standards now being developed, places unprecedented focus on the practices involved in doing scientific and engineering work. In an effort…

Three, Two, One ... Blast Off!

ERIC Educational Resources Information Center

Hawkins, Susan; Rogers, Meredith Park

2014-01-01

This lesson addresses the three dimensions of science learning as laid out in the "Next Generation Science Standards"--science and engineering process skills, crosscutting concepts, and disciplinary core ideas--in addition to embedding practical exposure to NOS tenets in an inquiry-based activity. In addition to the efficiency component,…

9. VIEW NORTH, EXCAVATED LOCK FROM WATER STREET (Numbers painted ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

9. VIEW NORTH, EXCAVATED LOCK FROM WATER STREET (Numbers painted on stones for reconstruction purposes) - Bald Eagle Cross-Cut Canal Lock, North of Water Street along West Branch of Susquehanna River South bank, 500 feet East of Jay Street Bridge, Lock Haven, Clinton County, PA

In Praise of Messy Data

ERIC Educational Resources Information Center

Gould, Roy; Sunbury, Susan; Dussault, Mary

2014-01-01

The "Next-Generation Science Standards" emphasize the importance of teaching the practices of science alongside content ideas and crosscutting concepts (NGSS Lead States 2013). Chief among these practices is the ability to gather, assess, analyze, and interpret data. Authentic inquiry near the leading-edge of science offers a wonderful…

Acceptance of Mobile Health in Communities Underrepresented in Biomedical Research: Barriers and Ethical Considerations for Scientists.

PubMed

Nebeker, Camille; Murray, Kate; Holub, Christina; Haughton, Jessica; Arredondo, Elva M

2017-06-28

The rapid expansion of direct-to-consumer wearable fitness products (eg, Flex 2, Fitbit) and research-grade sensors (eg, SenseCam, Microsoft Research; activPAL, PAL Technologies) coincides with new opportunities for biomedical and behavioral researchers. Underserved communities report among the highest rates of chronic disease and could benefit from mobile technologies designed to facilitate awareness of health behaviors. However, new and nuanced ethical issues are introduced with new technologies, which are challenging both institutional review boards (IRBs) and researchers alike. Given the potential benefits of such technologies, ethical and regulatory concerns must be carefully considered. Our aim was to understand potential barriers to using wearable sensors among members of Latino, Somali and Native Hawaiian Pacific Islander (NHPI) communities. These ethnic groups report high rates of disparate health conditions and could benefit from wearable technologies that translate the connection between physical activity and desired health outcomes. Moreover, these groups are traditionally under-represented in biomedical research. We independently conducted formative research with individuals from southern California, who identified as Latino, Somali, or Native Hawaiian Pacific Islander (NHPI). Data collection methods included survey (NHPI), interview (Latino), and focus group (Somali) with analysis focusing on cross-cutting themes. The results pointed to gaps in informed consent, challenges to data management (ie, participant privacy, data confidentiality, and data sharing conventions), social implications (ie, unwanted attention), and legal risks (ie, potential deportation). Results shed light on concerns that may escalate the digital divide. Recommendations include suggestions for researchers and IRBs to collaborate with a goal of developing meaningful and ethical practices that are responsive to diverse research participants who can benefit from technology-enabled research methods. ClinicalTrials.gov NCT02505165; https://clinicaltrials.gov/ct2/show/NCT02505165 (Archived by WebCite at http://www.Webcitation.org/6r9ZSUgoT). ©Camille Nebeker, Kate Murray, Christina Holub, Jessica Haughton, Elva M Arredondo. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 28.06.2017.

Acceptance of Mobile Health in Communities Underrepresented in Biomedical Research: Barriers and Ethical Considerations for Scientists

PubMed Central

2017-01-01

Background The rapid expansion of direct-to-consumer wearable fitness products (eg, Flex 2, Fitbit) and research-grade sensors (eg, SenseCam, Microsoft Research; activPAL, PAL Technologies) coincides with new opportunities for biomedical and behavioral researchers. Underserved communities report among the highest rates of chronic disease and could benefit from mobile technologies designed to facilitate awareness of health behaviors. However, new and nuanced ethical issues are introduced with new technologies, which are challenging both institutional review boards (IRBs) and researchers alike. Given the potential benefits of such technologies, ethical and regulatory concerns must be carefully considered. Objective Our aim was to understand potential barriers to using wearable sensors among members of Latino, Somali and Native Hawaiian Pacific Islander (NHPI) communities. These ethnic groups report high rates of disparate health conditions and could benefit from wearable technologies that translate the connection between physical activity and desired health outcomes. Moreover, these groups are traditionally under-represented in biomedical research. Methods We independently conducted formative research with individuals from southern California, who identified as Latino, Somali, or Native Hawaiian Pacific Islander (NHPI). Data collection methods included survey (NHPI), interview (Latino), and focus group (Somali) with analysis focusing on cross-cutting themes. Results The results pointed to gaps in informed consent, challenges to data management (ie, participant privacy, data confidentiality, and data sharing conventions), social implications (ie, unwanted attention), and legal risks (ie, potential deportation). Conclusions Results shed light on concerns that may escalate the digital divide. Recommendations include suggestions for researchers and IRBs to collaborate with a goal of developing meaningful and ethical practices that are responsive to diverse research participants who can benefit from technology-enabled research methods. Trial Registration ClinicalTrials.gov NCT02505165; https://clinicaltrials.gov/ct2/show/NCT02505165 (Archived by WebCite at http://www.Webcitation.org/6r9ZSUgoT) PMID:28659258

Research on Utilization of Geo-Energy

NASA Astrophysics Data System (ADS)

Bock, Michaela; Scheck-Wenderoth, Magdalena; GeoEn Working Group

2013-04-01

The world's energy demand will increase year by year and we have to search for alternative energy resources. New concepts concerning the energy production from geo-resources have to be provided and developed. The joint project GeoEn combines research on the four core themes geothermal energy, shale gas, CO2 capture and CO2 storage. Sustainable energy production from deep geothermal energy resources is addressed including all processes related to geothermal technologies, from reservoir exploitation to energy conversion in the power plant. The research on the unconventional natural gas resource, shale gas, is focussed on the sedimentological, diagenetic and compositional characteristics of gas shales. Technologies and solutions for the prevention of the greenhouse gas carbon dioxide are developed in the research fields CO2 capture technologies, utilization, transport, and CO2 storage. Those four core themes are studied with an integrated approach using the synergy of cross-cutting methodologies. New exploration and reservoir technologies and innovative monitoring methods, e.g. CSMT (controlled-source magnetotellurics) are examined and developed. All disciplines are complemented by numerical simulations of the relevant processes. A particular strength of the project is the availability of large experimental infrastructures where the respective technologies are tested and monitored. These include the power plant Schwarze Pumpe, where the Oxyfuel process is improved, the pilot storage site for CO2 in Ketzin and the geothermal research platform Groß Schönebeck, with two deep wells and an experimental plant overground for research on corrosion. In addition to fundamental research, the acceptance of new technologies, especially in the field of CCS is examined. Another focus addressed is the impact of shale gas production on the environment. A further important goal is the education of young scientists in the new field "geo-energy" to fight skills shortage in this field of growing economic and ecologic relevance.

75 FR 36358 - Notice of Establishment of the United States-Turkey Business Council and Request for Applicants...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

... AGENCY: International Trade Administration, Department of Commerce. ACTION: Notice. SUMMARY: In December... governments that reflect private sector views, needs, and concerns regarding creation of an environment in... to offer a broad perspective on the business environment in Turkey, including cross-cutting issues...

How do I manage and staff for intelligent transportation systems? : thinking outside the box : a cross-cutting study : maximizing project resources and advancing coordination

DOT National Transportation Integrated Search

2000-08-01

Intelligent transportation systems (ITS) projects often need staff with skills that are not resident in traditional transportation organizations. Therefore, project administrators must sometimes look beyond the usual staffing methods to fill these po...

DCIs, SEPs, and CCs, Oh My! Understanding the Three Dimensions of the NGSS

ERIC Educational Resources Information Center

Duncan, Ravit Golan; Cavera, Veronica L.

2015-01-01

The "Next Generation Science Standards'" three dimensions--disciplinary core ideas (DCIs), science and engineering practices (SEPs), and crosscutting concepts (CCs)--were headliners at NSTA's national conference in Chicago and featured in many of the organization's other professional-development efforts this year (NGSS Lead States 2013).…

How Healthy Is Our Pond?

ERIC Educational Resources Information Center

Sterling, Donna R.; Hargrove, Dori L.

2014-01-01

With crosscutting concepts such as stability and change in the "Next Generation Science Standards," this article was written for those who have wondered how to teach these concepts in a way that is relevant to students. In this investigation, students ask the question, "Why is the pond dirty?" As students investigate the health…

Assessing Scientific Practices Using Machine-Learning Methods: How Closely Do They Match Clinical Interview Performance?

ERIC Educational Resources Information Center

Beggrow, Elizabeth P.; Ha, Minsu; Nehm, Ross H.; Pearl, Dennis; Boone, William J.

2014-01-01

The landscape of science education is being transformed by the new "Framework for Science Education" (National Research Council, "A framework for K-12 science education: practices, crosscutting concepts, and core ideas." The National Academies Press, Washington, DC, 2012), which emphasizes the centrality of scientific…

Full road closure for work zone operations, a cross-cutting study : reducing congestion and crashes through full road closure for maintenance and construction.

DOT National Transportation Integrated Search

2003-08-01

The objective of this report is to raise awareness among designers construction engineers, and managers of the applications and benefits of full road closure during rehabilitation and construction activities. Based on interviews with project personne...

30 CFR 75.214 - Supplemental support materials, equipment and tools.

Code of Federal Regulations, 2010 CFR

2010-07-01

... tools. 75.214 Section 75.214 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Roof Support § 75... accessible location on each working section or within four crosscuts of each working section. (b) The...

Estimating Linear Size and Scale: Body Rulers

ERIC Educational Resources Information Center

Jones, Gail; Taylor, Amy; Broadwell, Bethany

2009-01-01

The National Science Education Standards emphasise the use of concepts and skills that cut across the science domains. One of these cross-cutting areas is measurement. Students should know measurement systems, units of measurement, tools and error in measurement as well as the importance of measurement to scientific endeavours. Even though…

Sex Education as a Transversal Subject

ERIC Educational Resources Information Center

Rabelo, Amanda Oliveira; Pereira, Graziela Raupp; Reis, Maria Amélia; Ferreira, António G.

2015-01-01

Currently, sex education is in many countries a transversal subject, in which the school becomes a privileged place for the implementation of policies that aim at promoting "public health." Its design as a cross-cutting subject envisages fostering the dissemination of these subjects in all pedagogical and curricular fields; however, we…

Students' Development and Use of Models to Explain Electrostatic Interactions

ERIC Educational Resources Information Center

Mayer, Kristin Elizabeth

2017-01-01

The National Research Council (2012) recently published A Framework for K-12 Science Education that describes a vision for science classrooms where students engage in three dimensions--scientific and engineering practices, crosscutting concepts, and disciplinary core ideas--to explain phenomena or observations they can make about the universe…

Supporting Three-Dimensional Science Learning: The Role of Curiosity-Driven Classroom Discourse

ERIC Educational Resources Information Center

Johnson, Wendy Renae

2017-01-01

The National Research Council's "Framework for K-12 Science Education" (2011) presents a new vision for science education that calls for the integration of the three dimensions of science learning: science and engineering practices, crosscutting concepts, and disciplinary core ideas. Unlike previous conceptions of science learning that…

30 CFR 75.522-1 - Incandescent and fluorescent lamps.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Incandescent and fluorescent lamps. 75.522-1...-1 Incandescent and fluorescent lamps. (a) Except for areas of a coal mine inby the last open crosscut, incandescent lamps may be used to illuminate underground areas. When incandescent lamps are used...

30 CFR 75.522-1 - Incandescent and fluorescent lamps.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Incandescent and fluorescent lamps. 75.522-1...-1 Incandescent and fluorescent lamps. (a) Except for areas of a coal mine inby the last open crosscut, incandescent lamps may be used to illuminate underground areas. When incandescent lamps are used...

30 CFR 75.522-1 - Incandescent and fluorescent lamps.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Incandescent and fluorescent lamps. 75.522-1...-1 Incandescent and fluorescent lamps. (a) Except for areas of a coal mine inby the last open crosscut, incandescent lamps may be used to illuminate underground areas. When incandescent lamps are used...

30 CFR 75.522-1 - Incandescent and fluorescent lamps.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Incandescent and fluorescent lamps. 75.522-1...-1 Incandescent and fluorescent lamps. (a) Except for areas of a coal mine inby the last open crosscut, incandescent lamps may be used to illuminate underground areas. When incandescent lamps are used...

30 CFR 75.522-1 - Incandescent and fluorescent lamps.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Incandescent and fluorescent lamps. 75.522-1...-1 Incandescent and fluorescent lamps. (a) Except for areas of a coal mine inby the last open crosscut, incandescent lamps may be used to illuminate underground areas. When incandescent lamps are used...

Cross-Cutting Interoperability in an Earth Science Collaboratory

NASA Technical Reports Server (NTRS)

Lynnes, Christopher; Ramachandran, Rahul; Kuo, Kuo-Sen

2011-01-01

An Earth Science Collaboratory is: A rich data analysis environment with: (1) Access to a wide spectrum of Earth Science data, (3) A diverse set of science analysis services and tools, (4) A means to collaborate on data, tools and analysis, and (5)Supports sharing of data, tools, results and knowledge

ALPS- A potential new automated lumber processing system

Treesearch

Charles W. McMillin; Richard W. Conners; Henry A. Huber

1984-01-01

During conventional production of solid wood furniture parts, logs are first sawed into lumber having defects randomly located throughout the board. The lumber is then remanufactured and the defects removed by ripping and crosscutting. The process is labor intensive, and saw kerf losses alone waste substantial volumes of lumber.

Making Sense of Natural Selection

ERIC Educational Resources Information Center

Passmore, Cynthia; Coleman, Elizabeth; Horton, Jennifer; Parker, Heather

2013-01-01

At its core, science is about making sense of the world around us. Therefore, science education should engage students in that sense-making process. Helping students make sense of disciplinary core ideas and crosscutting concepts by engaging in scientific practices is the key innovation of the "Next Generation Science Standards"…

11. VIEW WEST, RECESS AREA WITH PORTION OF MITER SILL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

11. VIEW WEST, RECESS AREA WITH PORTION OF MITER SILL (Numbers painted on stones for reconstruction purposes) - Bald Eagle Cross-Cut Canal Lock, North of Water Street along West Branch of Susquehanna River South bank, 500 feet East of Jay Street Bridge, Lock Haven, Clinton County, PA

77 FR 9268 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... proposes the following: (a) Non-permissible surveying equipment will be used only when equivalent...-powered non-permissible surveying equipment in or inby the last open crosscut, including in the return airways. The petitioner states that: (1) Equivalent permissible equipment does not exist. (2) Equivalent...

Automatic Vehicle Location successful transit applications : a cross-cutting study : improving service and safety

DOT National Transportation Integrated Search

2000-08-01

Belief in the value of AVL is substantiated by statements of benefits contained earlier in this study. Even so, none of the study agencies are making full use of the voluminous amount of AVL data automatically recorded by the system. Efforts to make ...

Hanford Site Beryllium Program: Past, Present, and Future - 12428

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, Mark; Garcia, Pete; Goeckner, Julie

2012-07-01

The U.S. Department of Energy (DOE) has a long history of beryllium use because of the element's broad application to many nuclear operations and processes. At the Hanford Site beryllium alloy was used to fabricate parts for reactors, including fuel rods for the N-Reactor during plutonium production. Because of continued confirmed cases of chronic beryllium disease (CBD), and data suggesting CBD occurs at exposures to low-level concentrations, the DOE decided to issue a rule to further protect federal and contractor workers from hazards associated with exposure to beryllium. When the beryllium rule was issued in 1999, each of the Hanfordmore » Site contractors developed a Chronic Beryllium Disease Prevention Program (CBDPP) and initial site wide beryllium inventories. A new site-wide CBDPP, applicable to all Hanford contractors, was issued in May, 2009. In the spring of 2010 the DOE Headquarters Office of Health, Safety, and Security (HSS) conducted an independent inspection to evaluate the status of implementation of the Hanford Site Chronic Beryllium Disease Prevention Program (CBDPP). The report identified four Findings and 12 cross-cutting Opportunities for Improvement (OFIs). A corrective action plan (CAP) was developed to address the Findings and crosscutting OFIs. The DOE directed affected site contractors to identify dedicated resources to participate in development of the CAP, along with involving stakeholders. The CAP included general and contractor-specific recommendations. Following initiation of actions to implement the approved CAP, it became apparent that additional definition of product deliverables was necessary to assure that expectations were adequately addressed and CAP actions could be closed. Consequently, a supplement to the original CAP was prepared and transmitted to DOE-HQ for approval. Development of the supplemental CAP was an eight month effort. From the onset a core group of CAP development members were identified to develop a mechanism for assuring that consensus was achieved on products developed as part of the CAP and the closure process. The original CAP was developed based on a large number of actions developed from the HSS report. This was essentially a 'bottoms up' approach. The revised CAP development team concluded that a more holistic, process-based approach was appropriate to assure that the resulting deliverable resulted in a best-in-class product. Consequently, issues and recommendations contained in the HSS report were grouped into 11 program areas, specific product deliverables were identified within each of the program areas, and a work breakdown structure (WBS) was logically applied to number the groupings. While the revised approach to product development utilizes a more holistic, 'top down' approach, the intent was still to incorporate specific recommendations and address specific issues contained in the HSS report. Through implementation of this new approach, a collaborative team has been established that works together using a consensus process for ensuring product completion. Benefits of the new approach include building a level of trust amongst all parties, quality of the products have improved, and acceptance by all parties of what action will truly meet the intent of the deficiency and make the beryllium program stronger. Open dialogue occurs amongst the core Be CAP team members, Hanford contractors, and DOE. It has been a learning process and will continue to be one, but everyone shares the common goal of reducing worker exposure to beryllium. (authors)« less

Initiating the 2002 Mars Science Laboratory (MSL) Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.; Henderson, Rebecca

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to investigate the Martian environment and requires new capabilities that are currently are not available. The MSL Technology Program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by JPL and is divided into a Focused Program and a Base Program. The MSL Technology Program is under the focused program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology's requirements and the development process are tightly coordinated with the Project. The MSL Technology Program combines the proven management techniques of flight projects with the commercial technology management strategies of industry and academia, to create a technology management program that meets the short-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment. This paper also provides an update of the 2003 MSL technology program and examines some of the drivers that changed the program from its initiation.

The Earth2Class Model for Professional Development to Implement the Next Generation Science Standards

NASA Astrophysics Data System (ADS)

Passow, M. J.; Assumpcao, C. M.; Baggio, F. D.; Hemming, S. R.; Goodwillie, A. M.; Brenner, C.

2014-12-01

Professional development for teachers involved in the implementation of the Next Generation Science Standards (NGSS) will require a multifaceted approach combining curriculum development, understanding the nature of science, applications of engineering and technology, integrating reading and writing, and other pedagogical components. The Earth2Class Workshops (E2C) at the Lamont-Doherty Earth Observatory of Columbia University (LDEO) provides one model for creating effective training to meet the NGSS challenges. E2C has provided more than 135 workshops since 1998 that have brought together LDEO research scientists with classroom teachers and students from the New York metropolitan area and elsewhere. Each session provides teachers with the chance to learn first-hand about the wide range of investigations conducted at LDEO. This approach aligns strongly with the NGSS goals: mastery of the disciplinary core ideas, science and engineering practices, understanding the nature of science, and cross-cutting relationships. During workshops, participating teachers interact with scientists to gain understanding of what stimulated research questions, how scientists put together all the components of investigations, and ways in which results are disseminated. Networking among teachers often leads to developing lesson plans based on the science, as well as support for professional growth not always possible within the school setting. Through the E2C website www.earth2class.org, teachers and students not able to attend the live workshops can access archival versions of the sessions. The website also provides a wide variety of educational resources. These have proved to be valuable on a national basis, as evidenced by an average of more than 300,000 hits per month from thousands of site visitors. Participating researchers have found E2C to be an effective approach to provide broader outreach of their results. During the next couple of years, the E2C program will expand to provide more resources useful for educators seeking to introduce NGSS-based programs in their districts. The E2C model can be applied in other settings, with appropriate modifications.

Overview of Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2006-01-01

This viewgraph presentation reviews the development of a technology program leading to Mars missions. The presentation includes: the goals of technology program, elements of technology program, program metrics, major accomplishments, examples and Information about the Mars Technology Program.

Miniature Loop Heat Pipe (MLHP) Thermal Management System

NASA Technical Reports Server (NTRS)

Ku, Jentung

2004-01-01

The MLHP Thermal Management System consists of a loop heat pipe (LHP) with multiple evaporators and condensers, thermal electrical coolers, and deployable radiators coated with variable emittance coatings (VECs). All components are miniaturized. It retains all the performance characteristics of state-of-the-art LHPs and offers additional advantages to enhance the functionality, versatility, and reliability of the system, including flexible locations of instruments and radiators, a single interface temperature for multiple instruments, cooling the on instruments and warming the off instruments simultaneously, improving. start-up success, maintaining a constant LHP operating temperature over a wide range of instrument powers, effecting automatic thermal switching and thermal diode actions, and reducing supplemental heater powers. It can fully achieve low mass, low power and compactness necessary for future small spacecraft. Potential applications of the MLHP thermal technology for future missions include: 1) Magnetospheric Constellation; 2) Solar Sentinels; 3) Mars Science Laboratory; 4) Mars Scouts; 5) Mars Telecom Orbiter; 6) Space Interferometry Mission; 7) Laser Interferometer Space Antenna; 8) Jupiter Icy Moon Orbiter; 9) Terrestrial Planet Finder; 10) Single Aperture Far-Infrared Observatory, and 11) Exploration Missions. The MLHP Thermal Management System combines the operating features of a variable conductance heat pipe, a thermal switch, a thermal diode, and a state-of-the-art LHP into a single integrated thermal system. It offers many advantages over conventional thermal control techniques, and can be a technology enabler for future space missions. Successful flight validation will bring the benefits of MLHP technology to the small satellite arena and will have cross-cutting applications to both Space Science and Earth Science Enterprises.

Thirst for Power: Energy, Water and Human Survival

NASA Astrophysics Data System (ADS)

Webber, M.

2015-12-01

Energy and water are precious resources, and they are interconnected. The energy sector uses a lot of water -- the thermoelectric power sector alone is the largest user of water in the U.S., withdrawing 200 billion gallons daily for powerplant cooling. Conversely, the water sector is responsible for over twelve percent of national energy consumption for moving, pumping, treating, and heating water. This interdependence means that droughts can cause energy shortages, and power outages can bring the water system to a halt. It also means that water efficiency is a pathway to energy efficiency and vice versa. This talk will give a big-picture overview of global energy and water trends to describe how they interact, what conflicts are looming, and how they can work together. This talk will include the vulnerabilities and cross-cutting solutions such as efficient markets and smart technologies that embed more information about resource management. It will include discussion of how population growth, economic growth, climate change, and short-sighted policies are likely to make things worse. Yet, more integrated planning with long-term sustainability in mind along with cultural shifts, advanced technologies, and better design can avert such a daunting future. Combining anecdotes and personal stories with insights into the latest science of energy and water, this talk will identify a hopeful path toward wise, long-range water-energy decisions and a more reliable and abundant future for humanity.

Scale and the Evolutionarily Based Approximate Number System: An Exploratory Study

ERIC Educational Resources Information Center

Delgado, Cesar; Jones, M. Gail; You, Hye Sun; Robertson, Laura; Chesnutt, Katherine; Halberda, Justin

2017-01-01

Crosscutting concepts such as "scale, proportion, and quantity" are recognised by U.S. science standards as a potential vehicle for students to integrate their scientific and mathematical knowledge; yet, U.S. students and adults trail their international peers in scale and measurement estimation. Culturally based knowledge of scale such…

Science Inquiry into Local Animals: Structure and Function Explored through Model Making

ERIC Educational Resources Information Center

Rule, Audrey C.; Tallakson, Denise A.; Glascock, Alex L.; Chao, Astoria

2015-01-01

This article describes an arts- and spatial thinking skill--integrated inquiry project applied to life science concepts from the Next Generation Science Standards for fourth grade students that focuses on two unifying or crosscutting themes: (1) structure (or "form") and function and (2) use of models. Students made observations and…

Treating Pompe Disease

ERIC Educational Resources Information Center

Bokor, Julie; Joseph, Drew; Darwiche, Houda

2015-01-01

One of the crosscutting concepts in science is cause and effect. A disease model can provide understanding of cause and effect, as teachers scaffold student thinking from molecular changes in the DNA to visible traits in the organism. The project described in this article uses Pompe disease, a rare recessive disorder, as a model of cause and…

76 FR 65519 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-21

... of Policy, Planning, and Innovation's cross-cutting policy role in the Agency as well as externally... other fields that also play a crucial role in supporting and improving behavioral health. OPPI will seek.... Office of the Director (MD1) As the chief policy advisor to the Administrator, SAMHSA, the OPPI Director...

Adapting to the Environment

ERIC Educational Resources Information Center

Auclair, Joy

2014-01-01

This author wanted to begin her 10-grade biology course with an authentic inquiry that included a review of equipment use, investigation methods, and critical thinking skills. She also wanted to engage students in the practice of science while teaching biological core ideas and crosscutting concepts. She was at a loss as to what that inquiry might…

Exploring NASA Human Spaceflight and Pioneering Scenarios

NASA Technical Reports Server (NTRS)

Zapata, Edgar; Wilhite, Alan

2015-01-01

The life cycle cost analysis of space exploration scenarios is explored via a merger of (1) scenario planning, separating context and (2) modeling and analysis of specific content. Numerous scenarios are presented, leading to cross-cutting recommendations addressing life cycle costs, productivity, and approaches applicable to any scenarios. Approaches address technical and non-technical factors.

DRDC Power and Energy S and T Option Analysis and Recommendations : A Response to Cross-Cutting Client SandT Requirements

DTIC Science & Technology

2015-06-01

Measurement of radiative and nonradiative recombination rates in InGaAsP and AlGaAs light sources’, IEEE J. Quantum Electron., 1984, QE-20, (8), pp. 838–854 ELECTRONICS LETTERS 16th September 2004 Vol. 40 No. 19

30 CFR 57.22309 - Methane monitors (V-A mines).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Methane monitors (V-A mines). 57.22309 Section... Standards for Methane in Metal and Nonmetal Mines Equipment § 57.22309 Methane monitors (V-A mines). (a) Methane monitors shall be installed on continuous mining machines used in or beyond the last open crosscut...

Social Capital Theory: A Cross-Cutting Analytic for Teacher/Therapist Work in Integrating Children's Services?

ERIC Educational Resources Information Center

Forbes, Joan; McCartney, Elspeth

2010-01-01

Reviewing relevant policy, this article argues that the current "integration interlude" is concerned with reformation of work relations to create new forms of "social capital". The conceptual framework of social capital has been used by government policy-makers and academic researchers to examine different types, configurations…

Common Core Science Standards: Implications for Students with Learning Disabilities

ERIC Educational Resources Information Center

Scruggs, Thomas E.; Brigham, Frederick J.; Mastropieri, Margo A.

2013-01-01

The Common Core Science Standards represent a new effort to increase science learning for all students. These standards include a focus on English and language arts aspects of science learning, and three dimensions of science standards, including practices of science, crosscutting concepts of science, and disciplinary core ideas in the various…

STEM Integration in Middle School Life Science: Student Learning and Attitudes

ERIC Educational Resources Information Center

Guzey, S. Selcen; Moore, Tamara J.; Harwell, Michael; Moreno, Mario

2016-01-01

In many countries around the world, there has been an increasing emphasis on improving science education. Recent reform efforts in the USA call for teachers to integrate scientific and engineering practices into science teaching; for example, science teachers are asked to provide learning experiences for students that apply crosscutting concepts…

How Do Students Understand Energy in Biology, Chemistry, and Physics? Development and Validation of an Assessment Instrument

ERIC Educational Resources Information Center

Opitz, Sebastian Tobias; Neumann, Knut; Bernholt, Sascha; Harms, Ute

2017-01-01

Science standards of different countries introduced disciplinary core ideas and crosscutting concepts--such as energy--to help students develop a more interconnected science understanding. As previous research has mostly addressed energy learning in specific disciplinary contexts, this study targets students' cross-disciplinary understanding of…

What's yours, mine, and ours : overcoming intellectual property rights issues : a cross-cutting study : facilitating private-sector participation and expediting deployment

DOT National Transportation Integrated Search

2000-08-01

Debate over the ownership and use of intellectual property developed jointly by the public and private sectors has caused delays in ITS deployment projects. While a fundamental business incentive of the private sector for investing in research and de...

Drivers, Start Your Glue Guns: Using Model Stock Cars to Explore Motion and Force Concepts

ERIC Educational Resources Information Center

Angle, Julie

2011-01-01

The recently released document "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" emphasizes the importance of engaging students in practices of science and engineering to help them understand how scientific knowledge about the natural world develops. The document identifies eight essential…

Valuing Little Steps toward Inquiry

ERIC Educational Resources Information Center

Grueber, David; Whitin, Phyllis

2012-01-01

In a climate of high-stakes testing that emphasizes content, it can be challenging to teach science from an inquiry perspective. In addition there is a widespread call for a new approach to science education that includes science practices, crosscutting concepts, and core ideas (NRC 2011). However, it is not imperative for teachers to implement…

Dimensional and Cross-Cutting Assessment in the "DSM-5"

ERIC Educational Resources Information Center

Jones, K. Dayle

2012-01-01

A significant proposed change to the 5th edition of the "Diagnostic and Statistical Manual of Mental Disorders" ("DSM-5") that will significantly affect the way counselors diagnose mental disorders is the addition of dimensional assessments to the categorical diagnoses. The author reviews the current "DSM"'s (4th ed., text rev.; American…

Research gaps: adaptive management to cross-cutting issues

Treesearch

Jonathan W. Long; Carl Skinner; Malcolm North; Lenya Quinn-Davidson

2014-01-01

A number of studies undertaken by the Forest Service within the synthesis area have been designed and implemented to better understand both more immediate and long-term effects of treatments, including the Blacks Mountain Ecological Research Project (Oliver 2000); Goosenest Adaptive Management Area Project (Ritchie 2005); Long-Term Soil Productivity Study (Powers 2006...

Taking Science Home: Connecting Schools and Families through Science Activity Packs for Young Children

ERIC Educational Resources Information Center

Reinhart, Meredith; Bloomquist, Debra; Strickler-Eppard, Lacey; Czerniak, Charlene M.; Gilbert, Amanda; Kaderavek, Joan; Molitor, Scott C.

2016-01-01

A Framework for K-12 Science Education indicates that introducing young children to scientific and engineering practices, core disciplinary ideas, and crosscutting concepts during the early years is essential for the development of conceptual understanding in science. Unfortunately, science is infrequently included in preschool and primary…

Using Google Earth to Teach Plate Tectonics and Science Explanations

ERIC Educational Resources Information Center

Blank, Lisa M.; Plautz, Mike; Almquist, Heather; Crews, Jeff; Estrada, Jen

2012-01-01

"A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" emphasizes that the practice of science is inherently a model-building activity focused on constructing explanations using evidence and reasoning (NRC 2012). Because building and refining is an iterative process, middle school students may view this practice…

6. INTERIOR OF NORTH END OF STEAM PLANT, GROUND FLOOR, ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

6. INTERIOR OF NORTH END OF STEAM PLANT, GROUND FLOOR, SHOWING FORMER LOCATION OF DIESEL ENGINES. THIS WAS THE FIRST PART OF THE BUILDING TO BE CONSTRUCTED, WHEN IT HOUSED ONLY THE DIESEL ENGINES. December 4, 1990 - Crosscut Steam Plant, North side Salt River near Mill Avenue & Washington Street, Tempe, Maricopa County, AZ

Coordinated Cybersecurity Incident Handling: Roles, Processes, and Coordination Networks for Crosscutting Incidents

DTIC Science & Technology

2011-06-01

ICCRTS 2011), Qu ?c City, Qu ?c, Canada, June 21-23, 2011. U.S. Government or Federal Rights License. 14. ABSTRACT To aid in the practice of...phases might be similarly difficult to identify or standardize. By far the most common situational awareness paradigm cited in our review was Mica

Engaging Students in the Scientific Practices of Explanation and Argumentation

ERIC Educational Resources Information Center

Reiser, Brian J.; Berland, Leema K.; Kenyon, Lisa

2012-01-01

"A Framework for K-12 Science Education" identifies eight science and engineering practices for K-12 classrooms. These practices, along with core ideas and crosscutting concepts, define the nation's learning goals for science. An important advance from earlier standards (AAAS 1993, NRC 1996), these practices are clearly identified "not" as…

76 FR 41217 - Technical Inputs and Assessment Capacity on Topics Related to 2013 U.S. National Climate Assessment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-13

...-01] Technical Inputs and Assessment Capacity on Topics Related to 2013 U.S. National Climate... Capacity Related to Regional, Sectoral, and Cross-Cutting Assessments for the 2013 U.S. National Climate... if applicable, institutional affiliation(s) if applicable). In addition, it is recommended that EOIs...

Commentary: Definitely More than Measurement Error--But How Should We Understand and Deal with Informant Discrepancies?

ERIC Educational Resources Information Center

Achenbach, Thomas M.

2011-01-01

The special section articles demonstrate the importance of informant discrepancies. They also illustrate challenges posed by discrepancies, plus opportunities for advancing research and practice. This commentary addresses these cross-cutting issues: (a) Discrepancies affect many kinds of assessment besides ratings of children's problems. (b)…

The Next Generation of Science Standards: Implications for Biology Education

ERIC Educational Resources Information Center

Bybee, Rodger W.

2012-01-01

The release of A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas (NRC, 2012) provides the basis for the next generation of science standards. This article first describes that foundation for the life sciences; it then presents a draft standard for natural selection and evolution. Finally, there is a…

Any Questions? Want to Stimulate Student Curiosity? Let Them Ask Questions!

ERIC Educational Resources Information Center

Weiss, Tarin Harrar

2013-01-01

Of the eight scientific practices highlighted in "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas," the first is for students to develop abilities to ask questions and define problems (NRC 2012). Constructing a range of questions about an object or phenomenon validates not only what students have…

Students' Energy Concepts at the Transition between Primary and Secondary School

ERIC Educational Resources Information Center

Opitz, Sebastian T.; Harms, Ute; Neumann, Knut; Kowalzik, Kristin; Frank, Arne

2015-01-01

Energy is considered both a core idea and a crosscutting concept in science education. A thorough understanding of the energy concept is thought to help students learn about other (related) concepts within and across science subjects, thereby fostering scientific literacy. This study investigates students' progression in understanding the energy…

30 CFR 57.22213 - Air flow (III mines).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Air flow (III mines). 57.22213 Section 57.22213... Methane in Metal and Nonmetal Mines Ventilation § 57.22213 Air flow (III mines). The quantity of air coursed through the last open crosscut in pairs or sets of entries, or through other ventilation openings...

What Makes Us Tick...Tock?

ERIC Educational Resources Information Center

Talbot, Kristen; Hug, Barbara

2013-01-01

Teachers often ask: How can I engage my students in the study of "real" science? The answer can be found in the National Research Council's "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2012). This framework calls for a new approach to science education and is the basis for…

Patterns of Reasoning about Ecological Systemic Reasoning for Early Elementary Students

ERIC Educational Resources Information Center

Hokayem, H.

2016-01-01

Systems and system models are recognized as a crosscutting concept in the newly released framework for K-12 science education (NRC [National Research Council], 2012). In previous work, I developed a learning progression for systemic reasoning in ecology at the elementary level. The learning progression captured five levels of students' reasoning…

30 CFR 57.22309 - Methane monitors (V-A mines).

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Methane monitors (V-A mines). 57.22309 Section... Standards for Methane in Metal and Nonmetal Mines Equipment § 57.22309 Methane monitors (V-A mines). (a) Methane monitors shall be installed on continuous mining machines used in or beyond the last open crosscut...

Crosscutting Runtime Adaptations of LD Execution

ERIC Educational Resources Information Center

Zarraonandia, Telmo; Dodero, Juan Manuel; Fernandez, Camino

2006-01-01

In this paper, the authors describe a mechanism for the introduction of small variations in the original learning design process defined in a particular Unit of Learning (UoL). The objective is to increase the UoL reusability by offering the designers an alternative to introduce slight variations on the original design instead of creating a new…

Teaching the "Geo" in Geography with the Next Generation Science Standards

ERIC Educational Resources Information Center

Wysession, Michael E.

2016-01-01

The Next Generation Science Standards (NGSS; Achieve 2014, 532; Figure 1A) represent a new approach to K-12 science education that involves the interweaving of three educational dimensions: Science and Engineering Practices (SEPs), Disciplinary Core Ideas (DCIs), and Crosscutting Concepts (CCCs). Unlike most preexisting state science standards for…

Space-time evolution of cataclasis in carbonate fault zones

NASA Astrophysics Data System (ADS)

Ferraro, Francesco; Grieco, Donato Stefano; Agosta, Fabrizio; Prosser, Giacomo

2018-05-01

The present contribution focuses on the micro-mechanisms associated to cataclasis of both calcite- and dolomite-rich fault rocks. This work combines field and laboratory data of carbonate fault cores currently exposed in central and southern Italy. By first deciphering the main fault rock textures, their spatial distribution, crosscutting relationships and multi-scale dimensional properties, the relative timing of Intragranular Extensional Fracturing (IEF), chipping, and localized shear is inferred. IEF was predominant within already fractured carbonates, forming coarse and angular rock fragments, and likely lasted for a longer period within the dolomitic fault rocks. Chipping occurred in both lithologies, and was activated by grain rolling forming minute, sub-rounded survivor grains embedded in a powder-like carbonate matrix. The largest fault zones, which crosscut either limestones or dolostones, were subjected to localized shear and, eventually, to flash temperature increase which caused thermal decomposition of calcite within narrow (cm-thick) slip zones. Results are organized in a synoptic panel including the main dimensional properties of survivor grains. Finally, a conceptual model of the time-dependent evolution of cataclastic deformation in carbonate rocks is proposed.

Recommendations for training in pediatric psychology: defining core competencies across training levels.

PubMed

Palermo, Tonya M; Janicke, David M; McQuaid, Elizabeth L; Mullins, Larry L; Robins, Paul M; Wu, Yelena P

2014-10-01

As a field, pediatric psychology has focused considerable efforts on the education and training of students and practitioners. Alongside a broader movement toward competency attainment in professional psychology and within the health professions, the Society of Pediatric Psychology commissioned a Task Force to establish core competencies in pediatric psychology and address the need for contemporary training recommendations.   The Task Force adapted the framework proposed by the Competency Benchmarks Work Group on preparing psychologists for health service practice and defined competencies applicable across training levels ranging from initial practicum training to entry into the professional workforce in pediatric psychology.   Competencies within 6 cluster areas, including science, professionalism, interpersonal, application, education, and systems, and 1 crosscutting cluster, crosscutting knowledge competencies in pediatric psychology, are presented in this report.   Recommendations for the use of, and the further refinement of, these suggested competencies are discussed. © The Author 2014. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

The Bio Bay Game: Three-Dimensional Learning of Biomagnification

PubMed Central

JASTI, CHANDANA; LAUREN, HILLARY; WALLON, ROBERT C.; HUG, BARBARA

2016-01-01

Pressing concerns about sustainability and the state of the environment amplify the need to teach students about the connections between ecosystem health, toxicology, and human health. Additionally, the Next Generation Science Standards call for three-dimensional science learning, which integrates disciplinary core ideas, scientific practices, and crosscutting concepts. The Bio Bay Game is a way to teach students about the biomagnification of toxicants across trophic levels while engaging them in three-dimensional learning. In the game, the class models the biomagnification of mercury in a simple aquatic food chain as they play the roles of anchovies, tuna, and humans. While playing, the class generates data, which they analyze after the game to graphically visualize the buildup of toxicants. Students also read and discuss two articles that draw connections to a real-world case. The activity ends with students applying their understanding to evaluate the game as a model of biomagnification. Throughout the activity, students practice modeling and data analysis and engage with the crosscutting concepts of patterns and cause and effect to develop an understanding of core ideas about the connections between humans and the environment. PMID:27990023

Implications of the Next Generation Science Standards for Earth and Space Sciences

NASA Astrophysics Data System (ADS)

Wysession, M. E.; Colson, M.; Duschl, R. A.; Huff, K.; Lopez, R. E.; Messina, P.; Speranza, P.; Matthews, T.; Childress, J.

2012-12-01

The Next Generation Science Standards (NGSS), due to be released in 2013, set a new direction for K-12 science education in America. These standards will put forth significant changes for Earth and space sciences. The NGSS are based upon the recommendations of the National Research Council's 2011 report "A Framework for K-12 Science Education: Practices, Cross-Cutting Concepts, and Core Ideas." The standards are being written by a large group of authors who represent many different constituencies, including 26 participating states, in a process led by Achieve, Inc. The standards encourage innovative ways to teach science at the K-12 level, including enhanced integration between the content, practices, and crosscutting ideas of science and greater assimilation among the sciences and engineering, and among the sciences, mathematics, and English language arts. The NGSS presents a greater emphasis on Earth and space sciences than in previous standards, recommending a year at both the middle and high school levels. The new standards also present a greater emphasis on areas of direct impact between humans and the Earth system, including climate change, natural hazards, resource management, and sustainability.

The Bio Bay Game: Three-Dimensional Learning of Biomagnification.

PubMed

Jasti, Chandana; Lauren, Hillary; Wallon, Robert C; Hug, Barbara

2016-01-01

Pressing concerns about sustainability and the state of the environment amplify the need to teach students about the connections between ecosystem health, toxicology, and human health. Additionally, the Next Generation Science Standards call for three-dimensional science learning, which integrates disciplinary core ideas, scientific practices, and crosscutting concepts. The Bio Bay Game is a way to teach students about the biomagnification of toxicants across trophic levels while engaging them in three-dimensional learning. In the game, the class models the biomagnification of mercury in a simple aquatic food chain as they play the roles of anchovies, tuna, and humans. While playing, the class generates data, which they analyze after the game to graphically visualize the buildup of toxicants. Students also read and discuss two articles that draw connections to a real-world case. The activity ends with students applying their understanding to evaluate the game as a model of biomagnification. Throughout the activity, students practice modeling and data analysis and engage with the crosscutting concepts of patterns and cause and effect to develop an understanding of core ideas about the connections between humans and the environment.

Initiating the 2002 Mars Science Laboratory (MSL) Focused Technology Program

NASA Technical Reports Server (NTRS)

Caffrey, Robert T.; Udomkesmalee, Gabriel; Hayati, Samad A.

2004-01-01

The Mars Science Laboratory (MSL) Project is an aggressive mission launching in 2009 to deliver a new generation of rover safely to the surface of Mars and conduct comprehensive in situ investigations using a new generation of instruments. This system will be designed to land with precision and be capable of operating over a large percentage on the surface of Mars. It will have capabilities that will support NASA's scientific goals into the next decade of exphation. The MSL Technology program is developing a wide-range of technologies needed for this Mission and potentially other space missions. The MSL Technology Program reports to both the MSL Project and the Mars Technology Program (MTP). The dual reporting process creates a challenging management situation, but ensures the new technology meets both the specific MSL requirements and the broader Mars Program requirements. MTP is a NASA-wide technology development program managed by the Jet Propulsion Laboratory (JPL) and is divided into a Focused Program and a Base Program. The Focused Technology Program addresses technologies that are specific and critical to near-term missions, while the Base Technology Program addresses those technologies that are applicable to multiple missions and which can be characterized as longer term, higher risk, and high payoff technologies. The MSL Technology Program is under the Focused Program and is tightly coupled to MSL's mission milestones and deliverables. The technology budget is separate from the flight Project budget, but the technology s requirements and the development process are tightly coordinated with the Project. The Technology Program combines proven management techniques of flight projects with commercial and academic technology management strategies, to create a technology management program that meets the near-term requirements of MSL and the long-term requirements of MTP. This paper examines the initiation of 2002 MSL Technology program. Some of the areas discussed in this paper include technology definition, task selection, technology management, and technology assessment.

INL-EXT--18-50231-Revision-0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Snyder, Seth W; Simon, A.J.

There is an urgency to advancing wastewater technologies due to aging water infrastructure and emerging regulations. A crosscutting working group proposes a conceptual design for a test bed network to understand and evaluate wastewater technologies to drive acceptance and deployment of new technologies to enhance performance. The working group includes contributors from the U.S. Department of Energy, the U.S. Environmental Protection Agency, the U.S. National Science Foundation, and the Water Research Foundation (formerly known as the Water Environment & Reuse Foundation). In “The Water-Energy Nexus: Challenges and Opportunities” (June 2014), the U.S. Department of Energy identified key issues with water-energymore » interdependencies and identified water resource recovery (broadly referred to as “wastewater management” or “sewage treatment”) as a locus of opportunities to improve energy and water security. Traditional sewage treatment uses more than 30 billion kWh per year, almost one percent of our electricity supply (EPRI 2013), and energy use grew 74 percent from 1996 to 2011 (Tarallo 2014). Wastewater is a potential alternative source to address water scarcity. In addition, wastewater contains valuable energy, nutrient, and mineral resources. Traditional sewage treatment does not recover water or other resources. With improved technology and design, reclaimed wastewater could supplement existing water supplies and mitigate water stress. The energy (biogas and heat), nutrients (primarily nitrogen and phosphorus), and minerals in wastewater could displace fossil sources, reduce America’s dependence on imported energy, and reduce greenhouse gas emissions. If fully implemented, resource recovery would reduce discharges to the environment and provide ecosystem services. The primary role of both public and private wastewater facilities is to reduce risk to human health and the environment. The institutional driver is to meet regulatory requirements. Capital budgets and revenue from taxes and services are limited at wastewater utilities, reducing the ability to invest in innovation. Therefore, utilities are very risk averse and slow to adopt new technologies that go beyond their traditional historical mandate.« less

Phase IV: Deploying ESE Pilot Information Programs for State and Local Government in the Northeast, the Education Community and the Commercial Sector

NASA Technical Reports Server (NTRS)

Brower, Robert N.

2004-01-01

This Summary of Research report is a final report which summarizes significant accomplishments achieved during NASA grant NAG 13-00044 entitled Phase IV: Deploying ESE Pilot Information Programs for State and Local Government in the Northeast, the Education Community and the Commercial Sector , for the period of September 27,2000 through September 26,2004. All activities under this grant have been successfully completed. It has been requested by NASA reviewers that the material contained herein also be considered in $iew of NASA s twelve national priority areas. During the grant period, the nature of the Earth Science Enterprise (ESE) Application Program has been significantly amended (two major restructurings). These amendments have been reviewed at several meetings, including a national gathering held in Washington DC. Additional meetings have occurred with NASA officials at headquarters and at IAGT offices as the newly emerging programs have become defined. The work described herein is considered "cross-cutting", meaning that it has relevancy to several of the national priority areas. The time period covered requires that the twelve national priority areas initially articulated by NASA be considered. (Subsequent NASA revision has eliminated "community growth" as a focus area. It is not clear how this area might be treated in the future NASA organizational structure, but it is noted that the work reported herein includes clear potential for application to the previously defined community growth area, as well as most of the other application areas.) As indicated in the accompanying figure, activity reports throughout this report can be "mapped" to the priority areas.

Executive summary of the Strategic Plan for National Institutes of Health Obesity Research.

PubMed

Spiegel, Allen M; Alving, Barbara M

2005-07-01

The Strategic Plan for National Institutes of Health (NIH) Obesity Research is intended to serve as a guide for coordinating obesity research activities across the NIH and for enhancing the development of new efforts based on identification of areas of greatest scientific opportunity and challenge. Developed by the NIH Obesity Research Task Force with critical input from external scientists and the public, the Strategic Plan reflects a dynamic planning process and presents a multidimensional research agenda, with an interrelated set of goals and strategies for achieving the goals. The major scientific themes around which the Strategic Plan is framed include the following: preventing and treating obesity through lifestyle modification; preventing and treating obesity through pharmacologic, surgical, or other medical approaches; breaking the link between obesity and its associated health conditions; and cross-cutting topics, including health disparities, technology, fostering of interdisciplinary research teams, investigator training, translational research, and education/outreach efforts. Through the efforts described in the Strategic Plan for NIH Obesity Research, the NIH will strive to facilitate and accelerate progress in obesity research to improve public health.

Implications of the Earth Summit for ocean and coastal governance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cicin-Sain, B.; Knecht, R.W.

1993-10-01

The Earth Summit (United Nations Conference on Environmental and Development (UNCED)), held in Rio de Janeiro in June 1992, was unique in the history of international conferences. Never before had so many heads of state participated in such an international negotiation. UNCED was also unique in both the breadth of environmental and development issues addressed and in the nature of the cross-cutting dimensions that were examined (for example, from poverty, population growth, and the role of indigenous peoples to unsustainable patterns of consumption (in the North), the role of women, and technology transfer). The chapter devoted to oceans and coastsmore » was the longest and, in some ways, the most comprehensive, of the 40 chapters making up the action plan (Agenda 21) that was approved at Rio. This article provides an overview of the events leading up the Earth Summit, describes the principal outputs of the conference and their potential effects on ocean and coastal governance, discusses the main tension seen at UNCED and some of the negotiating processes, and, finally, considers current efforts at implementation of its recommendations. 43 refs., 1 fig.« less

Evaluation of the expect respect support group program: A violence prevention strategy for youth exposed to violence.

PubMed

Reidy, Dennis E; Holland, Kristin M; Cortina, Kai; Ball, Barbara; Rosenbluth, Barri

2017-07-01

In the present study, we assess the effects of the Expect Respect Support Groups (ERSG) on frequency of teen dating violence (TDV) and general youth violence. ERSG is a school-based violence prevention program for youth who have been exposed to violence in their home, school, or community. Boys and girls (N=1,678, M age =14.3, S.D.=1.7, Range=11-17) from 36 schools in Texas participated in this accelerated longitudinal (7-year trajectory) study beginning in 2011. Latent growth curve analyses were conducted using three waves of data from three cross-sectional cohorts of adolescents. Among boys, the number of ERSG sessions attended related to incremental declines in psychological TDV perpetration and victimization, physical TDV victimization, sexual TDV perpetration and victimization, reactive aggression, and proactive aggression. Girls attending ERSG demonstrated reductions in reactive and proactive aggression. The present findings suggest ERSG may be an effective cross-cutting strategy to reduce TDV and other forms of violence among high-risk boys and possibly girls. This information provides valuable understanding of TDV and youth violence in high-risk populations and may be useful in tailoring future prevention efforts to different groups of teens. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Peer engagement in harm reduction strategies and services: a critical case study and evaluation framework from British Columbia, Canada.

PubMed

Greer, Alissa M; Luchenski, Serena A; Amlani, Ashraf A; Lacroix, Katie; Burmeister, Charlene; Buxton, Jane A

2016-05-27

Engaging people with drug use experience, or 'peers,' in decision-making helps to ensure harm reduction services reflect current need. There is little published on the implementation, evaluation, and effectiveness of meaningful peer engagement. This paper aims to describe and evaluate peer engagement in British Columbia from 2010-2014. A process evaluation framework specific to peer engagement was developed and used to assess progress made, lessons learned, and future opportunities under four domains: supportive environment, equitable participation, capacity building and empowerment, and improved programming and policy. The evaluation was conducted by reviewing primary and secondary qualitative data including focus groups, formal documents, and meeting minutes. Peer engagement was an iterative process that increased and improved over time as a consequence of reflexive learning. Practical ways to develop trust, redress power imbalances, and improve relationships were crosscutting themes. Lack of support, coordination, and building on existing capacity were factors that could undermine peer engagement. Peers involved across the province reviewed and provided feedback on these results. Recommendations from this evaluation can be applied to other peer engagement initiatives in decision-making settings to improve relationships between peers and professionals and to ensure programs and policies are relevant and equitable.

Petrology of iron-rich magmatic segregations associated with strongly peraluminous trondhjemite in the Cornucopia stock, northeastern Oregon

NASA Astrophysics Data System (ADS)

Johnson, K.; Barnes, C. G.; Browning, J. M.; Karlsson, H. R.

The Middle Cretaceous Cornucopia stock in the Blue Mountains of northeastern Oregon is a small composite intrusion consisting of hornblende biotite tonalite, biotite trondhjemite, and three cordierite two mica trondhjemite units. Unusual magnetite + biotite-rich tonalitic rocks are associated with the Crater Lake cordierite trondhjemite, the youngest of the intrusions. Oxide-rich tonalites are characterized by high Fe ( 47-68 wt% total Fe as FeO), low SiO2 (<36 wt%), and enrichments in HFSE and REE (La(N)=361-903). Oxide-rich tonalites appear in a variety of forms, including composite dikes and sheets, in which they are associated with leucocratic tonalite. Leucotonalite is lower in SiO2 (60-72 wt%) than Crater Lake trondhjemite, and generally has ΣREE contents and Eu anomalies intermediate between the oxide-rich tonalite and Crater Lake compositions. Oxide-rich tonalites crosscut, and are crosscut by, shear zones in the host trondhjemite, indicating their emplacement late in the pluton's crystallization history. Granitic dikes crosscut the composite dikes in all localities. Geochemical considerations and sedimentary-like structures, such as load casts and bedding of magnetite-rich assemblages in the composite dikes and sheets, are suggestive of crystal settling from an Fe-rich parental magma. The Fe-rich liquid parental to the oxide-rich tonalite-leucotonalite pairs formed by extensive, in-situ, plagioclase + quartz-dominated crystallization of strongly peraluminous trondhjemite. Early magnetite saturation in the trondhjemite was suppressed, either because the parental trondhjemitic magma had a lower initial total Fe content or because it had a lower ferric-ferrous ratio, possibly reflecting a lower oxygen fugacity. Accumulation of magnetite from Fe-rich residual magma is a viable mechanism for the concentration of iron, and the subsequent formation of Fe-rich rocks, in calcic siliceous intrusions. Apparently, Fe-enrichment can occur locally in calcic magmas, and is not restricted to rocks of mafic tholeiitic or anorthositic affinity.

Petrology of iron-rich magmatic segregations associated with strongly peraluminous trondhjemite in the Cornucopia stock, northeastern Oregon

NASA Astrophysics Data System (ADS)

Johnson, K.; Barnes, C. G.; Browning, J. M.; Karlsson, H. R.

2001-11-01

The Middle Cretaceous Cornucopia stock in the Blue Mountains of northeastern Oregon is a small composite intrusion consisting of hornblende biotite tonalite, biotite trondhjemite, and three cordierite two mica trondhjemite units. Unusual magnetite + biotite-rich tonalitic rocks are associated with the Crater Lake cordierite trondhjemite, the youngest of the intrusions. Oxide-rich tonalites are characterized by high Fe ( 47-68 wt% total Fe as FeO), low SiO2 (<36 wt%), and enrichments in HFSE and REE (La(N)=361-903). Oxide-rich tonalites appear in a variety of forms, including composite dikes and sheets, in which they are associated with leucocratic tonalite. Leucotonalite is lower in SiO2 (60-72 wt%) than Crater Lake trondhjemite, and generally has ΣREE contents and Eu anomalies intermediate between the oxide-rich tonalite and Crater Lake compositions. Oxide-rich tonalites crosscut, and are crosscut by, shear zones in the host trondhjemite, indicating their emplacement late in the pluton's crystallization history. Granitic dikes crosscut the composite dikes in all localities. Geochemical considerations and sedimentary-like structures, such as load casts and bedding of magnetite-rich assemblages in the composite dikes and sheets, are suggestive of crystal settling from an Fe-rich parental magma. The Fe-rich liquid parental to the oxide-rich tonalite-leucotonalite pairs formed by extensive, in-situ, plagioclase + quartz-dominated crystallization of strongly peraluminous trondhjemite. Early magnetite saturation in the trondhjemite was suppressed, either because the parental trondhjemitic magma had a lower initial total Fe content or because it had a lower ferric-ferrous ratio, possibly reflecting a lower oxygen fugacity. Accumulation of magnetite from Fe-rich residual magma is a viable mechanism for the concentration of iron, and the subsequent formation of Fe-rich rocks, in calcic siliceous intrusions. Apparently, Fe-enrichment can occur locally in calcic magmas, and is not restricted to rocks of mafic tholeiitic or anorthositic affinity.

Stress changes ahead of an advancing tunnel

USGS Publications Warehouse

Abel, J.F.; Lee, F.T.

1973-01-01

Instrumentation placed ahead of three model tunnels in the laboratory and ahead of a crosscut driven in a metamorphic rock mass detected stress changes several tunnel diameters ahead of the tunnel face. Stress changes were detected 4 diameters ahead of a model tunnel drilled into nearly elastic acrylic, 2??50 diameters ahead of a model tunnel drilled into concrete, and 2 diameters ahead of a model tunnel drilled into Silver Plume Granite. Stress changes were detected 7??50 diameters ahead of a crosscut driven in jointed, closely foliated gneisses and gneissic granites in an experimental mine at Idaho Springs, Colorado. These results contrast markedly with a theoretical elastic estimate of the onset of detectable stress changes at 1 tunnel diameter ahead of the tunnel face. A small compressive stress concentration was detected 2 diameters ahead of the model tunnel in acrylic, 1.25 diameters ahead of the model tunnel in concrete, and 1 diameter ahead of the model tunnel in granite. A similar stress peak was detected about 6 diameters ahead of the crosscut. No such stress peak is predicted from elastic theory. The 3-dimensional in situ stress determined in the field demonstrate that geologic structure controls stress orientations in the metamorphic rock mass. Two of the computed principal stresses are parallel to the foliation and the other principal stress is normal to it. The principal stress orientations vary approximately as the foliation attitude varies. The average horizontal stress components and the average vertical stress component are three times and twice as large, respectively, as those predicted from the overburden load. An understanding of the measured stress field appears to require the application of either tectonic or residual stress components, or both. Laboratory studies indicate the presence of proportionately large residual stresses. Mining may have triggered the release of strain energy, which is controlled by geologic structure. ?? 1973.

Devonian salt dissolution-collapse breccias flooring the Cretaceous Athabasca oil sands deposit and development of lower McMurray Formation sinkholes, northern Alberta Basin, Western Canada

NASA Astrophysics Data System (ADS)

Broughton, Paul L.

2013-01-01

The sub-Cretaceous paleotopography underlying giant Lower Cretaceous Athabasca oil sands, northern Alberta, has an orthogonal lattice pattern of troughs up to 50 km long and 100 m deep between pairs of cross-cutting lineaments. These structures are interpreted to have been inherited from a similar pattern of dissolution collapse-subsidence troughs in the underlying Middle Devonian salt beds. Removal of more than 100 m of halite salt fragmented the overlying Upper Devonian strata into fault blocks and collapse breccias that subsided into the underlying dissolution troughs. The unusually low 1:2 to 1:3 thickness ratios of halite salts to the overlying strata resulted in the Upper Devonian strata collapse-subsidence into underlying salt dissolution troughs being more cataclysmic during the first phase of salt removal. The second phase of slower but complete salt removal between the earlier troughs resulted in a more gradual subsidence of the overlying strata. This obliterated the earlier pattern of giant cross-cutting dissolution troughs bounded by major lineaments. The collapse breccia fabrics underlying the earlier troughs differ from those from areas between the troughs. Collapse breccias underlying the large troughs often have crushed fabrics distributed in zones that rapidly pinched out between fault blocks. Breccias between troughs developed as giant mosaics of detached carbonate blocks that formed breccia pipe complexes. Multiple sinkholes up to 100 m deep aligned along multi-km linear valley trends that dissected the sub-Cretaceous paleotopography. These sinkhole trends formed orthogonal patterns inherited from underlying lattice of NW-SE and NE-SW salt structured lineaments. These cross-cutting sinkhole trends have a smaller 5 km scale reticulate pattern similar to the giant 50 km scale pattern of collapse-subsidence troughs. Other sinkholes developed as lower McMurray strata sagged when underlying Devonian fault blocks and breccia pipes differentially subsided.

High-Purity Aluminum Magnet Technology for Advanced Space Transportation Systems

NASA Technical Reports Server (NTRS)

Goodrich, R. G.; Pullam, B.; Rickle, D.; Litchford, R. J.; Robertson, G. A.; Schmidt, D. D.; Cole, John (Technical Monitor)

2001-01-01

Basic research on advanced plasma-based propulsion systems is routinely focused on plasmadynamics, performance, and efficiency aspects while relegating the development of critical enabling technologies, such as flight-weight magnets, to follow-on development work. Unfortunately, the low technology readiness levels (TRLs) associated with critical enabling technologies tend to be perceived as an indicator of high technical risk, and this, in turn, hampers the acceptance of advanced system architectures for flight development. Consequently, there is growing recognition that applied research on the critical enabling technologies needs to be conducted hand in hand with basic research activities. The development of flight-weight magnet technology, for example, is one area of applied research having broad crosscutting applications to a number of advanced propulsion system architectures. Therefore, NASA Marshall Space Flight Center, Louisiana State University (LSU), and the National High Magnetic Field Laboratory (NHMFL) have initiated an applied research project aimed at advancing the TRL of flight-weight magnets. This Technical Publication reports on the group's initial effort to demonstrate the feasibility of cryogenic high-purity aluminum magnet technology and describes the design, construction, and testing of a 6-in-diameter by 12-in-long aluminum solenoid magnet. The coil was constructed in the machine shop of the Department of Physics and Astronomy at LSU and testing was conducted in NHMFL facilities at Florida State University and at Los Alamos National Laboratory. The solenoid magnet was first wound, reinforced, potted in high thermal conductivity epoxy, and bench tested in the LSU laboratories. A cryogenic container for operation at 77 K was also constructed and mated to the solenoid. The coil was then taken to NHMFL facilities in Tallahassee, FL. where its magnetoresistance was measured in a 77 K environment under steady magnetic fields as high as 10 T. In addition, the temperature dependence of the coil's resistance was measured from 77 to 300 K. Following this series of tests, the coil was transported to NHMFL facilities in Los Alamos, NM, and pulsed to 2 T using an existing capacitor bank pulse generator. The coil was completely successful in producing the desired field without damage to the windings.

The Mars Technology Program

NASA Technical Reports Server (NTRS)

Hayati, Samad A.

2002-01-01

Future Mars missions require new capabilities that currently are not available. The Mars Technology Program (MTP) is an integral part of the Mars Exploration Program (MEP). Its sole purpose is to assure that required technologies are developed in time to enable the baselined and future missions. The MTP is a NASA-wide technology development program managed by JPL. It is divided into a Focused Program and a Base Program. The Focused Program is tightly tied to the proposed Mars Program mission milestones. It involves time-critical deliverables that must be developed in time for infusion into the proposed Mars 2005, and, 2009 missions. In addition a technology demonstration mission by AFRL will test a LIDAR as part of a joint NASNAFRL experiment. This program bridges the gap between technology and projects by vertically integrating the technology work with pre-project development in a project-like environment with critical dates for technology infusion. A Base Technology Program attacks higher riskhigher payoff technologies not in the critical path of missions.

Examining Approaches to Research on Self-Regulated Learning: Conceptual and Methodological Considerations

ERIC Educational Resources Information Center

Karabenick, Stuart A.; Zusho, Akane

2015-01-01

We provide a conceptual commentary on the articles in this special issue, first by describing the unique features of each study, focusing on what we consider to be their theoretical and methodological contributions, and then by highlighting significant crosscutting themes and future directions in the study of SRL. Specifically, we define SRL to be…

Relationships between Conceptual Knowledge and Reasoning about Systems: Implications for Fostering Systems Thinking in Secondary Science

ERIC Educational Resources Information Center

Lyons, Cheryl

2014-01-01

Reasoning about systems is necessary for understanding many modern issues that face society and is important for future scientists and all citizens. Systems thinking may allow students to make connections and identify common themes between seemingly different situations and phenomena, and is relevant to the focus on cross-cutting concepts in…

77 FR 77113 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-31

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while...

77 FR 57157 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-17

... for methane immediately before and during the use of nonpermissible surveying equipment in or inby the last open crosscut. (e) Nonpermissible surveying equipment will not be used if methane is detected in concentrations at or above one percent for the area being surveyed. When methane is detected at such levels while...

Equity: The Critical Link in Southern Economic Development. Cross-Cutting Issue Report No. 2.

ERIC Educational Resources Information Center

Southern Growth Policies Board, Research Triangle Park, NC.

This report presents a general overview of equity issues in the modern South. It discusses access to such needs as jobs and job opportunities, health, housing, education, government benefits, political power, resources, and protection. Six at-risk groups receive special focus: the poor; Blacks; Hispanics; women; older Southerners; and the…

Beyond "Inert" Ideas to Teaching General Chemistry from Rich Contexts: Visualizing the Chemistry of Climate Change (VC3)

ERIC Educational Resources Information Center

Mahaffy, Peter G.; Holme, Thomas A.; Martin-Visscher, Leah; Martin, Brian E.; Versprille, Ashley; Kirchhoff, Mary; McKenzie, Lallie; Town, Marcy

2017-01-01

As one approach to moving beyond transmitting "inert" ideas to chemistry students, we use the term "teaching from rich contexts" to describe implementations of case studies or context-based learning based on systems thinking that provide deep and rich opportunities for learning crosscutting concepts through contexts. This…

Seeing the Solar System through Two Perspectives. Part 2 of a Series Focusing on Learning Progressions

ERIC Educational Resources Information Center

Tretter, Thomas R.; Thornburgh, William R.; Duckwall, Mark

2016-01-01

Supporting elementary student understandings of ideas related to Earth's Place in the Universe (ESS1) can be challenging, especially given the large time and distance scales involved with many of the concepts. However, with effective use of crosscutting concepts and science and engineering practices, important concepts within this content domain…

Wanted for 21st Century Schools: Renaissance STEM Teacher Preferred

ERIC Educational Resources Information Center

Ames, Tyler; Reeve, Edward; Stewardson, Gary; Lott, Kimberly

2017-01-01

As education seeks to mold itself to fit the demands of the 21st century, STEM education will continue to be an important consideration. The integrated and crosscutting nature of STEM is incorporated into the "Next Generation Science Standards" in which engineering design is raised to the same level as scientific inquiry and is expected…

Windmills by Design: Purposeful Curriculum Design to Meet Next Generation Science Standards in a 9-12 Physics Classroom

ERIC Educational Resources Information Center

Concannon, James; Brown, Patrick L.

2017-01-01

The "Next Generation Science Standards" (NGSS) challenges science teachers to think beyond specific content standards when considering how to design and implement curriculum. This lesson, "Windmills by Design," is an insightful lesson in how science teachers can create and implement a cross-cutting lesson to teach the concepts…

Sustainability and productivity of southern pine ecosystems: A thematic framework for integrating research and building partnerships

Treesearch

Charles K. McMahon; James P. Barnett

2000-01-01

In 1997, the USDA Forest Service Southern Research Station (SRS) published a Strategic Plan that formed a framework for addressing the Sustainability of Southern Forest Ecosystems. Six crosscutting themes were identified to facilitate research integration and partnership building among the widely dispersed SRS research work units. The Sustainability and Productivity of...

30 CFR 75.1103-9 - Minimum requirements; fire suppression materials and location; maintenance of entries and...

Code of Federal Regulations, 2010 CFR

2010-07-01

... tools and hardware required for its operation shall be stored at the foam generator. (2) Tools to open a...-expansion foam devices. 75.1103-9 Section 75.1103-9 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... and crosscuts; access doors; communications; fire crews; high-expansion foam devices. (a) The...

30 CFR 75.1103-9 - Minimum requirements; fire suppression materials and location; maintenance of entries and...

Code of Federal Regulations, 2014 CFR

2014-07-01

... tools and hardware required for its operation shall be stored at the foam generator. (2) Tools to open a...-expansion foam devices. 75.1103-9 Section 75.1103-9 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... and crosscuts; access doors; communications; fire crews; high-expansion foam devices. (a) The...

30 CFR 75.1103-9 - Minimum requirements; fire suppression materials and location; maintenance of entries and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... tools and hardware required for its operation shall be stored at the foam generator. (2) Tools to open a...-expansion foam devices. 75.1103-9 Section 75.1103-9 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... and crosscuts; access doors; communications; fire crews; high-expansion foam devices. (a) The...

30 CFR 75.1103-9 - Minimum requirements; fire suppression materials and location; maintenance of entries and...

Code of Federal Regulations, 2011 CFR

2011-07-01

... tools and hardware required for its operation shall be stored at the foam generator. (2) Tools to open a...-expansion foam devices. 75.1103-9 Section 75.1103-9 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... and crosscuts; access doors; communications; fire crews; high-expansion foam devices. (a) The...

30 CFR 75.1103-9 - Minimum requirements; fire suppression materials and location; maintenance of entries and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... tools and hardware required for its operation shall be stored at the foam generator. (2) Tools to open a...-expansion foam devices. 75.1103-9 Section 75.1103-9 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... and crosscuts; access doors; communications; fire crews; high-expansion foam devices. (a) The...

An apparatus to measure the crosscut shearing strength of roots

Treesearch

Robert R. Ziemer

1978-01-01

Loss of tree root strength after timber cutting is a principal mechanism leading to slope failure and landslides. Measurement of root shear strength changes can be useful in evaluating effects of logging on slope stability. The simple apparatus described measures shear strength directly on roots up to 50 mm diameter. Tests on live roots showed excellent correlation...

The influence of lumber grade on machine productivity in the rough mill

Treesearch

Philip H. Steele; Jan Wiedenbeck; Rubin Shmulsky; Anura Perera; Anura Perera

1999-01-01

Lumber grade effect on hardwood-part processing time was investigated with a digitally described lumber database in conjunction with a crosscut-first rough mill yield optimization simulator. In this study, the digital lumber sample was subdivided into five hardwood lumber grades. Three cutting bills with varying degrees of difficulty were Cut." The three cutting...

Microbes are trophic analogues of arthropods, mammals, and fish: Isotopic fingerprinting unites ‘green’ and ‘brown’ food webs

USDA-ARS?s Scientific Manuscript database

This work addresses a cross-cutting issue within the field of food-web ecology—the integration of the microbiome into trophic hierarchies. The nature and degree to which microbes may reconfigure the trophic identities of carnivore and omnivore groups have remained surprisingly unresolved. This means...

Developing a Learning Progression for Three-Dimensional Learning of the Patterns of Evolution

ERIC Educational Resources Information Center

Wyner, Yael; Doherty, Jennifer H.

2017-01-01

This paper examines how students make progress toward three-dimensional (3D) understanding of the patterns of evolution. Specifically, it proposes a learning progression that explains how scientific practices, crosscutting concepts, and disciplinary core ideas come together in naming and grouping, length of change over time, and the role of common…

Supporting Reform-Oriented Secondary Science Teaching through the Use of a Framework to Analyze Construction of Scientific Explanations

ERIC Educational Resources Information Center

Richmond, Gail; Parker, Joyce M.; Kaldaras, Leonora

2016-01-01

The Next-Generation Science Standards (NGSS) call for a different approach to learning science. They promote three-dimensional (3D) learning that blends disciplinary core ideas, crosscutting concepts and scientific practices. In this study, we examined explanations constructed by secondary science teacher candidates (TCs) as a scientific practice…

AspectAssay: A Technique for Expanding the Pool of Available Aspect Mining Test Data Using Concern Seeding

ERIC Educational Resources Information Center

Moore, David G., Jr.

2013-01-01

Aspect-oriented software design (AOSD) enables better and more complete separation of concerns in software-intensive systems. By extracting aspect code and relegating crosscutting functionality to aspects, software engineers can improve the maintainability of their code by reducing code tangling and coupling of code concerns. Further, the number…

Review of the National Research Council's Framework for K-12 Science Education

ERIC Educational Resources Information Center

Gross, Paul R.

2011-01-01

The new "Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" is a big, comprehensive volume, carefully organized and heavily documented. It is the long-awaited product of the Committee on a Conceptual Framework for New K-12 Science Education Standards. As noted, it is a weighty document (more than 300…

The City as a Focus for University Internationalisation: Four European Examples

ERIC Educational Resources Information Center

Ransom, James

2018-01-01

Internationalisation is a cross-cutting theme in the strategic plans of many universities, and an increased international profile is a core goal for many cities. At the same time, even the leaders of some of Europe's most avowedly outward-facing, 'global' universities have begun to prioritise relations with their city counterparts in recent years.…

30 CFR 57.22211 - Air flow (I-A mines).

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Air flow (I-A mines). 57.22211 Section 57.22211... Methane in Metal and Nonmetal Mines Ventilation § 57.22211 Air flow (I-A mines). The average air velocity in the last open crosscut in pairs or sets of developing entries, or through other ventilation...

Geography's Crosscutting Themes: Golden Anniversary Reflections on "The Four Traditions of Geography"

ERIC Educational Resources Information Center

Murphy, Alexander B.

2014-01-01

William Pattison's seminal 1964 article outlining geography's four core traditions provided an informative overview of distinct strands of research and teaching in geography. His article enhanced appreciation of the discipline's intellectual diversity, but it did not address why the identified traditions should be grouped together…

75 FR 3791 - Broadband Technology Opportunities Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-22

... Department of Agriculture Rural Utilities Service Broadband Technology Opportunities Program; Notices #0;#0... 0660-ZA28 Broadband Technology Opportunities Program AGENCY: National Telecommunications and... for the Broadband Technology Opportunities Program (BTOP or Program) that the agency established...

Mobilizing Science, Evidence and Technology for the Sendai Framework

NASA Astrophysics Data System (ADS)

Calkins, J. A.

2015-12-01

In March 2015, UN member states adopted the Sendai Framework for Disaster Risk Reduction: 2015-2030. The Sendai Framework recognises the cross-cutting nature of DRR policy and calls on a range of stakeholders to help governments. The Sendai Framework sets the aim of achieving "the substantial reduction of disaster risk and losses in lives, livelihoods and health and in the economic, physical, social, cultural and environmental assets of persons, businesses, communities and countries" (para 16). The international science community is acknowledged as a key stakeholder in supporting countries to implement the Sendai Framework. With this call to action and the gravity of disaster risk escalating around the globe, it is now vital that scientific knowledge and research resources are shared and become accessible in a form that can directly support coordinated application. Recent work is presented on the DRR gaps voiced by governments and scientists across a range of science and technology related needs, including through the drafting process for the Sendai Framework. Across regions and development levels, countries are seeking to address specific gaps they face in scientific capacities and information. Considering the many existing programmes, research initiatives and resources already seeking to generate evidence on DRR at all scales, how can science and technology improve delivery? Models and case studies prompt a useful discussion on what does and does not work. We provide an example of recent work in the UK disasters research community to assess scientific and technical capacity and collaborative effort to fulfil the commitment of the Sendai Framework. While there is no one-size-fits-all, any implementation approach needs to take into account the extraordinary, dynamic and localised nature of disasters and needs to be able to deliver relevant information to decision-makers at national and local levels, in a timely manner.

Site Remediation Technology InfoBase: A Guide to Federal Programs, Information Resources, and Publications on Contaminated Site Cleanup Technologies. First Edition

NASA Technical Reports Server (NTRS)

1998-01-01

Table of Contents: Federal Cleanup Programs; Federal Site Remediation Technology Development Assistance Programs; Federal Site Remediation Technology Development Electronic Data Bases; Federal Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Selected Bibliography: Federal Publication on Alternative and Innovative Site Remediation; and Appendix: Technology Program Contacts.

Do Raffles Boys "Rule" and Anglo-Chinese Boys "Own" Singapore? Analysing School-to-Work Correspondences in an Elite Developmental State

ERIC Educational Resources Information Center

Chua, Vincent

2015-01-01

This paper utilises ideas of correspondence as a way of thinking about intersections between school and work in Singapore's developmental state. Whereas the principle of correspondence predicts segregated patterns of association between school and work, this paper shows how a developmentalist form of political economy gives rise to crosscutting,…

An automated rough mill for the production of interior furniture parts

Treesearch

Philip A. Araman; Edwin L. Lucas

1975-01-01

An automated rough mill layout has been designed for manufacturing interior furniture parts. Designed to reduce human decisions and mistakes that can be costly when converting lumber into parts, the mill is based on a manufacturing sequence in which lumber is first gangsaw-ripped into standard-width strips before being crosscut to remove defects and cut to specific...

Rethinking the design of the furniture rough mill

Treesearch

Charles J. Gatchell; Charles J. Gatchell

1987-01-01

This paper discusses the crosscut-first rough mill with emphasis on the effects of lumber quality, cutting bills, and operator efficiency on yields. Adding a gang-rip-first option is recommended, which will use more of the lower grades of lumber while meeting the needs of the furniture and cabinet industries. Current research that indicates why gang ripping to glueline...

Observation and identification of wood decay fungi from the heartwood of peach tree limbs in central Georgia, USA

USDA-ARS?s Scientific Manuscript database

Peach tree health, longevity, and limb strength can be affected by wood decay fungi, but the extent of the colonization and their identities have not been characterized in Georgia, the United States of America. In an incubation experiment, dense white fungal mycelium grew on the cross-cut faces of a...

HW Buck for Windows: the optimal hardwood log bucking decision simulator with expanded capabilities

Treesearch

James B. Pickens; Scott Noble; Blair Orr; Philip A. Araman; John E. Baumgras; Al Steele

2006-01-01

It has long been recognized that inappropriate placement of crosscuts when manufacturing hardwood logs from harvested stems (log bucking) reduces the value of logs produced. Recent studies have estimated losses in the range from 28% to 38% in the lake states region. These estimates were developed by evaluating the bucking cuts chosen by harvesting crews and comparing...

Analyzing General Chemistry Texts' Treatment of Rates of Change Concepts in Reaction Kinetics Reveals Missing Conceptual Links

ERIC Educational Resources Information Center

Seethaler, Sherry; Czworkowski, John; Wynn, Lynda

2018-01-01

Change over time is a crosscutting theme in the sciences that is pivotal to reaction kinetics, an anchoring concept in undergraduate chemistry, and students' struggles with rates of change are well-documented. Informed by the education scholarship in chemistry, physics, and mathematics, a research team with members from complementary disciplinary…

Intensive hardwood log bucker training using HW Buck dramatically improves value recovery

Treesearch

James B. Pickens; Aaron Everett; Scott Noble; John E. Baumgras; Philip A. Araman; Conrad Waniger; Al Steele

2006-01-01

It has long been recognized that inappropriate placement of crosscuts when manufacturing hardwood logs from harvested stems (log bucking) reduces the value of logs produced. Recent studies have estimated losses in the range from 28% to 38% in the lake states region. It has not, however, been clear how to correct the problem. Efforts to improve value recovery have...

Scientific and Engineering Practices in K-12 Classrooms: Understanding "A Framework for K-12 Science Education"

ERIC Educational Resources Information Center

Bybee, Rodger W.

2011-01-01

In this article, the author presents the science and engineering practices from the recently released "A Framework for K-12 Science Education: Practices, Crosscutting Concepts, and Core Ideas" (NRC 2011). The author recognizes the changes implied by the new framework, and eventually a new generation of science education standards will present new…

NETL Crosscutting Research Video Series: Multiphase Flow

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Tingwen; Vaidheeswaran, Avinash

For over 30 years, NETL’s work in multiphase flow science has served as one of the cornerstones of the lab’s research portfolio. Multiphase flow refers to the simultaneous flow of gases, liquids and/or solid materials. The goal of the multiphase flow science team is to provide computational modeling tools to help offset the risk and cost of multiphase reactor development.

Economics of cutting hardwood dimension parts with an automated system

Treesearch

Henry A. Huber; Steve Ruddell; Kalinath Mukherjee; Charles W. McMillin

1989-01-01

A financial analysis using discounted cash-flow decision methods was completed to determine the economic feasibility of replacing a conventional roughmill crosscut and rip operation with a proposed automated computer vision and laser cutting system. Red oak and soft maple lumber were cut at production levels of 30 thousand board feet (MBF)/day and 5 MBF/day to produce...

Sixty-Five Years of University Education in Nigeria: Some Key Cross Cutting Issues

ERIC Educational Resources Information Center

Ejoigu, Aloy; Sule, Sheidu

2012-01-01

This paper traces briefly the history and development of university education in Nigeria from one university in 1948 to a total of 118 universities as at the time of writing the paper. Besides the chronicle, the paper examines some cross-cutting issues that tend to scuttle the otherwise good intentions and robust programme initiatives of the…

HEAT Sensor: Harsh Environment Adaptable Thermionic Sensor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Limb, Scott J.

2016-05-31

This document is the final report for the “HARSH ENVIRONMENT ADAPTABLE THERMIONIC SENSOR” project under NETL’s Crosscutting contract DE-FE0013062. This report addresses sensors that can be made with thermionic thin films along with the required high temperature hermetic packaging process. These sensors can be placed in harsh high temperature environments and potentially be wireless and self-powered.

Sequencing Conservation Actions Through Threat Assessments in the Southeastern United States

Treesearch

Robert D. Sutter; Christopher C. Szell

2006-01-01

The identification of conservation priorities is one of the leading issues in conservation biology. We present a project of The Nature Conservancy, called Sequencing Conservation Actions, which prioritizes conservation areas and identifies foci for crosscutting strategies at various geographic scales. We use the term “Sequencing” to mean an ordering of actions over...

Biosafety and biosecurity as essential pillars of international health security and cross-cutting elements of biological nonproliferation

PubMed Central

2010-01-01

The critical aspects of biosafety, biosecurity, and biocontainment have been in the spotlight in recent years. There have also been increased international efforts to improve awareness of modern practices and concerns with regard to the safe pursuit of life sciences research, and to optimize current oversight frameworks, thereby resulting in decreased risk of terrorist/malevolent acquisition of deadly pathogens or accidental release of a biological agent, and increased safety of laboratory workers. Our purpose is to highlight how the World Health Organization’s (WHO) revised International Health Regulations (IHR[2005]), the Biological Weapons Convention (BWC), and the United Nations Security Council Resolution (UNSCR) 1540 overlap in their requirements with regard to biosafety and biosecurity in order to improve the understanding of practitioners and policymakers and maximize the use of national resources employed to comply with internationally-mandated requirements. The broad range of goals of these international instruments, which are linked by the common thread of biosafety and biosecurity, highlight their significance as essential pillars of international health security and cross-cutting elements of biological nonproliferation. The current efforts of the Republic of Georgia to enhance biosafety and biosecurity in accordance with these international instruments are summarized. PMID:21143822

Influence of continuous mining arrangements on respirable dust exposures

PubMed Central

Beck, T. W.; Organiscak, J. A.; Pollock, D. E.; Potts, J. D.; Reed, W. R.

2017-01-01

In underground continuous mining operations, ventilation, water sprays and machine-mounted flooded-bed scrubbers are the primary means of controlling respirable dust exposures at the working face. Changes in mining arrangements — such as face ventilation configuration, orientation of crosscuts mined in relation to the section ventilation and equipment operator positioning — can have impacts on the ability of dust controls to reduce occupational respirable dust exposures. This study reports and analyzes dust concentrations measured by the Pittsburgh Mining Research Division for remote-controlled continuous mining machine operators as well as haulage operators at 10 U.S. underground mines. The results of these respirable dust surveys show that continuous miner exposures varied little with depth of cut but are significantly higher with exhaust ventilation. Haulage operators experienced elevated concentrations with blowing face ventilation. Elevated dust concentrations were observed for both continuous miner operators and haulage operators when working in crosscuts driven into or counter to the section airflow. Individual cuts are highlighted to demonstrate instances of minimal and excessive dust exposures attributable to particular mining configurations. These findings form the basis for recommendations for lowering face worker respirable dust exposures. PMID:28529441

Building Bridges for Innovation in Ageing: Synergies between Action Groups of the EIP on AHA.

PubMed

Bousquet, J; Bewick, M; Cano, A; Eklund, P; Fico, G; Goswami, N; Guldemond, N A; Henderson, D; Hinkema, M J; Liotta, G; Mair, A; Molloy, W; Monaco, A; Monsonis-Paya, I; Nizinska, A; Papadopoulos, H; Pavlickova, A; Pecorelli, S; Prados-Torres, A; Roller-Wirnsberger, R E; Somekh, D; Vera-Muñoz, C; Visser, F; Farrell, J; Malva, J; Andersen Ranberg, K; Camuzat, T; Carriazo, A M; Crooks, G; Gutter, Z; Iaccarino, G; Manuel de Keenoy, E; Moda, G; Rodriguez-Mañas, L; Vontetsianos, T; Abreu, C; Alonso, J; Alonso-Bouzon, C; Ankri, J; Arredondo, M T; Avolio, F; Bedbrook, A; Białoszewski, A Z; Blain, H; Bourret, R; Cabrera-Umpierrez, M F; Catala, A; O'Caoimh, R; Cesari, M; Chavannes, N H; Correia-da-Sousa, J; Dedeu, T; Ferrando, M; Ferri, M; Fokkens, W J; Garcia-Lizana, F; Guérin, O; Hellings, P W; Haahtela, T; Illario, M; Inzerilli, M C; Lodrup Carlsen, K C; Kardas, P; Keil, T; Maggio, M; Mendez-Zorrilla, A; Menditto, E; Mercier, J; Michel, J P; Murray, R; Nogues, M; O'Byrne-Maguire, I; Pappa, D; Parent, A S; Pastorino, M; Robalo-Cordeiro, C; Samolinski, B; Siciliano, P; Teixeira, A M; Tsartara, S I; Valiulis, A; Vandenplas, O; Vasankari, T; Vellas, B; Vollenbroek-Hutten, M; Wickman, M; Yorgancioglu, A; Zuberbier, T; Barbagallo, M; Canonica, G W; Klimek, L; Maggi, S; Aberer, W; Akdis, C; Adcock, I M; Agache, I; Albera, C; Alonso-Trujillo, F; Angel Guarcia, M; Annesi-Maesano, I; Apostolo, J; Arshad, S H; Attalin, V; Avignon, A; Bachert, C; Baroni, I; Bel, E; Benson, M; Bescos, C; Blasi, F; Barbara, C; Bergmann, K C; Bernard, P L; Bonini, S; Bousquet, P J; Branchini, B; Brightling, C E; Bruguière, V; Bunu, C; Bush, A; Caimmi, D P; Calderon, M A; Canovas, G; Cardona, V; Carlsen, K H; Cesario, A; Chkhartishvili, E; Chiron, R; Chivato, T; Chung, K F; d'Angelantonio, M; De Carlo, G; Cholley, D; Chorin, F; Combe, B; Compas, B; Costa, D J; Costa, E; Coste, O; Coupet, A-L; Crepaldi, G; Custovic, A; Dahl, R; Dahlen, S E; Demoly, P; Devillier, P; Didier, A; Dinh-Xuan, A T; Djukanovic, R; Dokic, D; Du Toit, G; Dubakiene, R; Dupeyron, A; Emuzyte, R; Fiocchi, A; Wagner, A; Fletcher, M; Fonseca, J; Fougère, B; Gamkrelidze, A; Garces, G; Garcia-Aymeric, J; Garcia-Zapirain, B; Gemicioğlu, B; Gouder, C; Hellquist-Dahl, B; Hermosilla-Gimeno, I; Héve, D; Holland, C; Humbert, M; Hyland, M; Johnston, S L; Just, J; Jutel, M; Kaidashev, I P; Khaitov, M; Kalayci, O; Kalyoncu, A F; Keijser, W; Kerstjens, H; Knezović, J; Kowalski, M; Koppelman, G H; Kotska, T; Kovac, M; Kull, I; Kuna, P; Kvedariene, V; Lepore, V; MacNee, W; Maggio, M; Magnan, A; Majer, I; Manning, P; Marcucci, M; Marti, T; Masoli, M; Melen, E; Miculinic, N; Mihaltan, F; Milenkovic, B; Millot-Keurinck, J; Mlinarić, H; Momas, I; Montefort, S; Morais-Almeida, M; Moreno-Casbas, T; Mösges, R; Mullol, J; Nadif, R; Nalin, M; Navarro-Pardo, E; Nekam, K; Ninot, G; Paccard, D; Pais, S; Palummeri, E; Panzner, P; Papadopoulos, N K; Papanikolaou, C; Passalacqua, G; Pastor, E; Perrot, M; Plavec, D; Popov, T A; Postma, D S; Price, D; Raffort, N; Reuzeau, J C; Robine, J M; Rodenas, F; Robusto, F; Roche, N; Romano, A; Romano, V; Rosado-Pinto, J; Roubille, F; Ruiz, F; Ryan, D; Salcedo, T; Schmid-Grendelmeier, P; Schulz, H; Schunemann, H J; Serrano, E; Sheikh, A; Shields, M; Siafakas, N; Scichilone, N; Siciliano, P; Skrindo, I; Smit, H A; Sourdet, S; Sousa-Costa, E; Spranger, O; Sooronbaev, T; Sruk, V; Sterk, P J; Todo-Bom, A; Touchon, J; Tramontano, D; Triggiani, M; Tsartara, S I; Valero, A L; Valovirta, E; van Ganse, E; van Hage, M; van den Berge, M; Vandenplas, O; Ventura, M T; Vergara, I; Vezzani, G; Vidal, D; Viegi, G; Wagemann, M; Whalley, B; Wickman, M; Wilson, N; Yiallouros, P K; Žagar, M; Zaidi, A; Zidarn, M; Hoogerwerf, E J; Usero, J; Zuffada, R; Senn, A; de Oliveira-Alves, B

2017-01-01

The Strategic Implementation Plan of the European Innovation Partnership on Active and Healthy Ageing (EIP on AHA) proposed six Action Groups. After almost three years of activity, many achievements have been obtained through commitments or collaborative work of the Action Groups. However, they have often worked in silos and, consequently, synergies between Action Groups have been proposed to strengthen the triple win of the EIP on AHA. The paper presents the methodology and current status of the Task Force on EIP on AHA synergies. Synergies are in line with the Action Groups' new Renovated Action Plan (2016-2018) to ensure that their future objectives are coherent and fully connected. The outcomes and impact of synergies are using the Monitoring and Assessment Framework for the EIP on AHA (MAFEIP). Eight proposals for synergies have been approved by the Task Force: Five cross-cutting synergies which can be used for all current and future synergies as they consider overarching domains (appropriate polypharmacy, citizen empowerment, teaching and coaching on AHA, deployment of synergies to EU regions, Responsible Research and Innovation), and three cross-cutting synergies focussing on current Action Group activities (falls, frailty, integrated care and chronic respiratory diseases).

Dyke-sill relationships in Karoo dolerites as indicators of propagation and emplacement processes of mafic magmas in the shallow crust

NASA Astrophysics Data System (ADS)

Coetzee, A.; Kisters, A. F. M.

2017-04-01

This paper describes the spatial and temporal relationships between Karoo-age (ca. 180 Ma) dolerite dykes and a regional-scale saucer-sill complex from the Secunda (coal mine) Complex in the northeastern parts of the Karoo Basin of South Africa. Unlike parallel dyke swarms of regional extensional settings, mafic dykes commonly show curved geometries and highly variable orientations, short strike extents and complex cross-cutting and intersecting relationships. Importantly, the dyke networks originate from the upper contacts of the first-order dolerite sill-saucer structure and are not the feeders of the saucer complex. Cross-cutting relationships indicate the largely contemporaneous formation of dykes and the inner sill and inclined sheets of the underlying saucer. Systematic dykes form a distinct boxwork-type pattern of two high-angle, interconnected dyke sets. The formation and orientation of this dyke set is interpreted to be related to the stretching of roof strata above elongated magma lobes that facilitated the propagation of the inner sill, similar to the "cracked lid" model described for large saucer complexes in Antarctica. Dyke patterns generally reflect the saucer emplacement process and the associated deformation of wall rocks rather than far-field regional stresses.

Mississippi Curriculum Framework for Drafting and Design Technology (Program CIP: 48.0102--Architectural Drafting Technology) (Program CIP: 48.0101--General Drafting). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the two course sequences of the state's postsecondary-level drafting and design technology program: architectural drafting technology and drafting and design technology. Presented first are a program description and…

Space and nuclear research and technology

NASA Technical Reports Server (NTRS)

1975-01-01

A fact sheet is presented on the space and nuclear research and technology program consisting of a research and technology base, system studies, system technology programs, entry systems technology, and experimental programs.

Radiation Effects in Fission and Fusion Reactors

NASA Astrophysics Data System (ADS)

Odette, G. Robert; Wirth, Brian D.

Since the prediction of "Wigner disease" [1] and the subsequent observation of anisotropic growth of the graphite used in the Chicago Pile, the effects of radiation on materials has been an important technological concern. The broad field of radiation effects impacts many critical advanced technologies, ranging from semiconductor processing to severe materials degradation in nuclear reactor environments. Radiation effects also occur in many natural environments, ranging from deep space to inside the Earth's crust. As selected examples that involve many basic phenomena that cross-cut and illustrate the broader impacts of radiation exposure on materials, this article focuses on modeling microstructural changes in iron-based ferritic alloys under high-energy neutron irradiation relevant to light water fission reactor pressure vessels. We also touch briefly on radiation effects in structural alloys for fusion reactor first wall and blanket structures; in this case the focus is on modeling the evolution of self-interstitial atom clusters and dislocation loops. Note, since even the narrower topic of structural materials for nuclear energy applications encompass a vast literature dating from 1942, the references included in this article are primarily limited to these two narrower subjects. Thus, the references cited here are presented as examples, rather than comprehensive bibliographies. However, the interested reader is referred to proceedings of continuing symposia series that have been sponsored by several organizations, several monographs [2-4] and key journals (e.g., Journal of Nuclear Materials, Radiation Effects and Defects in Solids).

The Impact of the Next Generation Science Standards on Future Professional Development and Astronomy Education Research

NASA Astrophysics Data System (ADS)

Buxner, Sanlyn

2013-06-01

The Next Generation Science Standards will have a profound impact on the future science education of students and professional development for teachers. The science and engineering practices, crosscutting concepts, and disciplinary core ideas laid out in the Framework for K-12 Science Education (NRC, 2011) will change the focus and methods of how we prepare teachers to meet these new standards. Extending beyond just the use of inquiry in the classroom, teachers will need support designing and implementing integrated experiences for students that require them to apply knowledge of content and practices. Integrating the three dimensions central to the new standards will pose curricular challenges and create opportunities for innovative space science projects and instruction. The science research and technology community will have an important role in supporting authentic classroom practices as well as training and support of teachers in these new ways of presenting science and technology. These changes will require a new focus for teacher professional development and new ways to research impacts of teacher training and changes in classroom practice. In addition, new and innovative tools will be needed to assess mastery of students’ knowledge of practices and the ways teachers effectively help students achieve these new goals. The astronomy education community has much to offer as K-12 and undergraduate level science educators rethink and redefine what it means to be scientifically literate and figure out how to truly measure the success of these new ways of teaching science.

Humanities Perspectives on Technology Program: Science, Technology & Society Program. Lehigh University, 1977-80.

ERIC Educational Resources Information Center

Cutcliffe, Stephen H., Ed.

Newsletter issues pertaining to Lehigh University's Humanities Perspectives on Technology (HPT) Program, which was renamed the Science, Technology and Society Program, are presented. Additionally, a newsletter article excerpt entitled "Elements of Technology in a Liberal Education" is included. Two 1977 issues of "HRP News,"…

Fuel Cell and Hydrogen Technologies Program | Hydrogen and Fuel Cells |

Science.gov Websites

NREL Fuel Cell and Hydrogen Technologies Program Fuel Cell and Hydrogen Technologies Program Through its Fuel Cell and Hydrogen Technologies Program, NREL researches, develops, analyzes, and validates fuel cell and hydrogen production, delivery, and storage technologies for transportation