Research opportunities to advance solar energy utilization.

PubMed

Lewis, Nathan S

2016-01-22

Major developments, as well as remaining challenges and the associated research opportunities, are evaluated for three technologically distinct approaches to solar energy utilization: solar electricity, solar thermal, and solar fuels technologies. Much progress has been made, but research opportunities are still present for all approaches. Both evolutionary and revolutionary technology development, involving foundational research, applied research, learning by doing, demonstration projects, and deployment at scale will be needed to continue this technology-innovation ecosystem. Most of the approaches still offer the potential to provide much higher efficiencies, much lower costs, improved scalability, and new functionality, relative to the embodiments of solar energy-conversion systems that have been developed to date. Copyright © 2016, American Association for the Advancement of Science.

Human spaceflight technology needs-a foundation for JSC's technology strategy

NASA Astrophysics Data System (ADS)

Stecklein, J. M.

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which added risks and became a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation's primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (Tech Needs) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. Th- TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC core technology competencies, and considerations of commercialization potential and partnership potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding at JSc. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration so that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

Human Spaceflight Technology Needs - A Foundation for JSC's Technology Strategy

NASA Technical Reports Server (NTRS)

Stecklein, Jonette M.

2013-01-01

Human space exploration has always been heavily influenced by goals to achieve a specific mission on a specific schedule. This approach drove rapid technology development, the rapidity of which adds risks as well as provides a major driver for costs and cost uncertainty. The National Aeronautics and Space Administration (NASA) is now approaching the extension of human presence throughout the solar system by balancing a proactive yet less schedule-driven development of technology with opportunistic scheduling of missions as the needed technologies are realized. This approach should provide cost effective, low risk technology development that will enable efficient and effective manned spaceflight missions. As a first step, the NASA Human Spaceflight Architecture Team (HAT) has identified a suite of critical technologies needed to support future manned missions across a range of destinations, including in cis-lunar space, near earth asteroid visits, lunar exploration, Mars moons, and Mars exploration. The challenge now is to develop a strategy and plan for technology development that efficiently enables these missions over a reasonable time period, without increasing technology development costs unnecessarily due to schedule pressure, and subsequently mitigating development and mission risks. NASA's Johnson Space Center (JSC), as the nation s primary center for human exploration, is addressing this challenge through an innovative approach in allocating Internal Research and Development funding to projects. The HAT Technology Needs (TechNeeds) Database has been developed to correlate across critical technologies and the NASA Office of Chief Technologist Technology Area Breakdown Structure (TABS). The TechNeeds Database illuminates that many critical technologies may support a single technical capability gap, that many HAT technology needs may map to a single TABS technology discipline, and that a single HAT technology need may map to multiple TABS technology disciplines. The TechNeeds Database greatly clarifies understanding of the complex relationships of critical technologies to mission and architecture element needs. Extensions to the core TechNeeds Database allow JSC to factor in and appropriately weight JSC Center Core Technology Competencies, and considerations of Commercialization Potential and Partnership Potential. The inherent coupling among these, along with an appropriate importance weighting, has provided an initial prioritization for allocation of technology development research funding for JSC. The HAT Technology Needs Database, with a core of built-in reports, clarifies and communicates complex technology needs for cost effective human space exploration such that an organization seeking to assure that research prioritization supports human spaceflight of the future can be successful.

The application test system: An approach to technology transfer. [USDA aerospace and remote sensing information requirements

NASA Technical Reports Server (NTRS)

Aaronson, A. C.; Buelow, K.; David, F. C.; Packard, R. L.; Ravet, F. W. (Principal Investigator)

1979-01-01

The latest satellite and computer processing and analysis technologies were tested and evaluated in terms of their application feasibility. Technologies evaluated include those developed, tested, and evaluated by the LACIE, as well as candidate technologies developed by the research community and private industry. The implementation of the applications test system and the technology transfer experience between the LACIE and the applications test system is discussed highlighting the approach, the achievements, and the shortcomings.

The technology-science relationship: Some curriculum implications

NASA Astrophysics Data System (ADS)

Gardner, Paul L.

1990-01-01

Technology encompasses the goods and services which people make and provide to meet human needs, and the processes and systems used for their development and delivery. Although technology and science are related, a distinction can be made between their purposes and outcomes. This paper considers four possible approaches to teaching students about the relationship between technology and science. A technology-as-illustration approach treats technology as if it were applied science; artefacts are presented to illustrate scientific principles. A cognitive-motivational approach also treats technology as applied science, but presents technology early in the instructional sequence in order to promote student interest and understanding. In an artefact approach, learners study artefacts as systems in order to understand the scientific principles which explain their workings. Finally, a technology-as-process approach emphasises the role of technological capability; in this approach, scientific concepts do not have privileged status as a basis for selecting curriculum content.

New Educational Services Development: Framework for Technology Entrepreneurship Education at Universities in Egypt

ERIC Educational Resources Information Center

Abou-Warda, Sherein Hamed

2016-01-01

Purpose: The overall objective of the current study is to explore how universities can better developing new educational services. The purpose of this paper is to develop framework for technology entrepreneurship education (TEPE) within universities. Design/Methodology/Approach: Qualitative and quantitative research approaches were employed. This…

FODEM: A Multi-Threaded Research and Development Method for Educational Technology

ERIC Educational Resources Information Center

Suhonen, Jarkko; de Villiers, M. Ruth; Sutinen, Erkki

2012-01-01

Formative development method (FODEM) is a multithreaded design approach that was originated to support the design and development of various types of educational technology innovations, such as learning tools, and online study programmes. The threaded and agile structure of the approach provides flexibility to the design process. Intensive…

Decontamination & decommissioning focus area

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-08-01

In January 1994, the US Department of Energy Office of Environmental Management (DOE EM) formally introduced its new approach to managing DOE`s environmental research and technology development activities. The goal of the new approach is to conduct research and development in critical areas of interest to DOE, utilizing the best talent in the Department and in the national science community. To facilitate this solutions-oriented approach, the Office of Science and Technology (EM-50, formerly the Office of Technology Development) formed five Focus AReas to stimulate the required basic research, development, and demonstration efforts to seek new, innovative cleanup methods. In Februarymore » 1995, EM-50 selected the DOE Morgantown Energy Technology Center (METC) to lead implementation of one of these Focus Areas: the Decontamination and Decommissioning (D & D) Focus Area.« less

A holistic framework to improve the uptake and impact of eHealth technologies.

PubMed

van Gemert-Pijnen, Julia E W C; Nijland, Nicol; van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-12-05

Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. To identify the potential and limitations of current eHealth frameworks (1999-2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap.

A Holistic Framework to Improve the Uptake and Impact of eHealth Technologies

PubMed Central

van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-01-01

Background Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. Objective The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. Methods To identify the potential and limitations of current eHealth frameworks (1999–2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. Results A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. Conclusions To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap. PMID:22155738

Overview of approaches to sustain forest productivity during forest road development and timber harvesting activities

Treesearch

Charles R. Blinn; Rick Dahlamn; James A. Mattson; Michael A. Thompson

1999-01-01

Various approaches are available to minimize impacts on forest productivity during forest road building and timber harvesting activities. These approaches include a variety of practices and technologies. They include practices such as reducing road and trail development, using designated trails, and leaving slash at the stump on nutrient deficient sites. Technology...

New Theoretical Approach Integrated Education and Technology

ERIC Educational Resources Information Center

Ding, Gang

2010-01-01

The paper focuses on exploring new theoretical approach in education with development of online learning technology, from e-learning to u-learning and virtual reality technology, and points out possibilities such as constructing a new teaching ecological system, ubiquitous educational awareness with ubiquitous technology, and changing the…

An Integrated Approach to Information Technology in Schools--Bradford City Technology College.

ERIC Educational Resources Information Center

Gomersall, I. R.

The City Technology Colleges in Great Britain were developed to teach science and information technology to students from 11 to 18 years of age. The approach adopted at the Bradford City Technology College, which was to open in September 1990, is one in which emphasis is given to combining established technologies with a new educational context.…

Systems Engineering and Integration for Technology Programs

NASA Technical Reports Server (NTRS)

Kennedy, Kruss J.

2006-01-01

The Architecture, Habitability & Integration group (AH&I) is a system engineering and integration test team within the NASA Crew and Thermal Systems Division (CTSD) at Johnson Space Center. AH&I identifies and resolves system-level integration issues within the research and technology development community. The timely resolution of these integration issues is fundamental to the development of human system requirements and exploration capability. The integration of the many individual components necessary to construct an artificial environment is difficult. The necessary interactions between individual components and systems must be approached in a piece-wise fashion to achieve repeatable results. A formal systems engineering (SE) approach to define, develop, and integrate quality systems within the life support community has been developed. This approach will allow a Research & Technology Program to systematically approach the development, management, and quality of technology deliverables to the various exploration missions. A tiered system engineering structure has been proposed to implement best systems engineering practices across all development levels from basic research to working assemblies. These practices will be implemented through a management plan across all applicable programs, projects, elements and teams. While many of the engineering practices are common to other industries, the implementation is specific to technology development. An accounting of the systems engineering management philosophy will be discussed and the associated programmatic processes will be presented.

76 FR 12343 - Technology and Media Services for Individuals With Disabilities-Steppingstones of Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-07

... two phases: (1) Development and (2) research on effectiveness. Abstracts of projects funded under... approaches. Phase 2 projects must subject technology-based approaches to rigorous field-based research to... scientifically rigorous research or theory, that demonstrates the potential effectiveness of the technology-based...

Support for the Development of Technological Innovations: Promoting Responsible Social Uses.

PubMed

Legault, Georges A; Verchère, Céline; Patenaude, Johane

2018-04-01

How can technological development, economic development, and the claims from society be reconciled? How should responsible innovation be promoted? The "responsible social uses" approach proposed here was devised with these considerations in view. In this article, a support procedure for promoting responsible social uses (RSU) is set out and presented. First, the context in which this procedure emerged, which incorporates features of both the user-experience approach and that of ethical acceptability in technological development, is specified. Next, the characteristic features of the procedure are presented, that is, its purpose, fundamental orientation, and component parts as experimented by partners. Third, the RSU approach is compared with other support approaches and considered in term of how each approach assumes responsible innovation. Briefly, the RSU procedure is a way of addressing the issue of responsible innovation through an effective integration of social concerns.

Economic development evaluation based on science and patents

NASA Astrophysics Data System (ADS)

Jokanović, Bojana; Lalic, Bojan; Milovančević, Miloš; Simeunović, Nenad; Marković, Dusan

2017-09-01

Economic development could be achieved through many factors. Science and technology factors could influence economic development drastically. Therefore the main aim in this study was to apply computational intelligence methodology, artificial neural network approach, for economic development estimation based on different science and technology factors. Since economic analyzing could be very challenging task because of high nonlinearity, in this study was applied computational intelligence methodology, artificial neural network approach, to estimate the economic development based on different science and technology factors. As economic development measure, gross domestic product (GDP) was used. As the science and technology factors, patents in different field were used. It was found that the patents in electrical engineering field have the highest influence on the economic development or the GDP.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

ERIC Educational Resources Information Center

Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

2017-01-01

This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

An end-to-end approach to developing biological and chemical detector requirements

NASA Astrophysics Data System (ADS)

Teclemariam, Nerayo P.; Purvis, Liston K.; Foltz, Greg W.; West, Todd; Edwards, Donna M.; Fruetel, Julia A.; Gleason, Nathaniel J.

2009-05-01

Effective defense against chemical and biological threats requires an "end-to-end" strategy that encompasses the entire problem space, from threat assessment and target hardening to response planning and recovery. A key element of the strategy is the definition of appropriate system requirements for surveillance and detection of threat agents. Our end-to-end approach to venue chem/bio defense is captured in the Facilities Weapons of Mass Destruction Decision Analysis Capability (FacDAC), an integrated system-of-systems toolset that can be used to generate requirements across all stages of detector development. For example, in the early stage of detector development the approach can be used to develop performance targets (e.g., sensitivity, selectivity, false positive rate) to provide guidance on what technologies to pursue. In the development phase, after a detector technology has been selected, the approach can aid in determining performance trade-offs and down-selection of competing technologies. During the application stage, the approach can be employed to design optimal defensive architectures that make the best use of available technology to maximize system performance. This presentation will discuss the end-to-end approach to defining detector requirements and demonstrate the capabilities of the FacDAC toolset using examples from a number of studies for the Department of Homeland Security.

Optimizing technology investments: a broad mission model approach

NASA Technical Reports Server (NTRS)

Shishko, R.

2003-01-01

A long-standing problem in NASA is how to allocate scarce technology development resources across advanced technologies in order to best support a large set of future potential missions. Within NASA, two orthogonal paradigms have received attention in recent years: the real-options approach and the broad mission model approach. This paper focuses on the latter.

An Approach to Develop Physics Student Teachers' Skills of Using Instructional Technology

ERIC Educational Resources Information Center

Devecioglu, Yasemin; Akdeniz, Ali Riza

2008-01-01

It is very important to develop student teachers' skills and knowledge during the pre-service teacher education process. In this study, the effectiveness of the approach in which student teachers' gained the skills of developing and using Teacher Guided Materials (TGMs) based on integration of technology on physics education in Special Teaching…

Experiences with New Approach to Use of Information Technologies in Education

ERIC Educational Resources Information Center

Kostolányová, Katerina

2008-01-01

Paper describes approach of Department of Information and Communication technologies (KIK) on Pedagogical Faculty of University of Ostrava in Ostrava (PedF OU) to development of information knowledge and skills of students of OU with the aid of modern methods and education technologies with support of information technologies (IT). It surveys the…

New Approaches and Trends in the Philosophy of Educational Technology for Learning and Teaching Environments

ERIC Educational Resources Information Center

Ipek, Ismail; Ziatdinov, Rushan

2017-01-01

The purpose of this study is to discuss instructional design and technology (IDT) model strategies for developing learning and teaching environments, based on philosophical approaches to educational technology theory. The study begins with a discussion of IDT models to define the history of educational technology or instructional technology…

Lithium-Ion Batteries for Aerospace Applications

NASA Technical Reports Server (NTRS)

Surampudi, S.; Halpert, G.; Marsh, R. A.; James, R.

1999-01-01

This presentation reviews: (1) the goals and objectives, (2) the NASA and Airforce requirements, (3) the potential near term missions, (4) management approach, (5) the technical approach and (6) the program road map. The objectives of the program include: (1) develop high specific energy and long life lithium ion cells and smart batteries for aerospace and defense applications, (2) establish domestic production sources, and to demonstrate technological readiness for various missions. The management approach is to encourage the teaming of universities, R&D organizations, and battery manufacturing companies, to build on existing commercial and government technology, and to develop two sources for manufacturing cells and batteries. The technological approach includes: (1) develop advanced electrode materials and electrolytes to achieve improved low temperature performance and long cycle life, (2) optimize cell design to improve specific energy, cycle life and safety, (3) establish manufacturing processes to ensure predictable performance, (4) establish manufacturing processes to ensure predictable performance, (5) develop aerospace lithium ion cells in various AH sizes and voltages, (6) develop electronics for smart battery management, (7) develop a performance database required for various applications, and (8) demonstrate technology readiness for the various missions. Charts which review the requirements for the Li-ion battery development program are presented.

Responsibility ascriptions in technology development and engineering: three perspectives.

PubMed

Doorn, Neelke

2012-03-01

In the last decades increasing attention is paid to the topic of responsibility in technology development and engineering. The discussion of this topic is often guided by questions related to liability and blameworthiness. Recent discussions in engineering ethics call for a reconsideration of the traditional quest for responsibility. Rather than on alleged wrongdoing and blaming, the focus should shift to more socially responsible engineering, some authors argue. The present paper aims at exploring the different approaches to responsibility in order to see which one is most appropriate to apply to engineering and technology development. Using the example of the development of a new sewage water treatment technology, the paper shows how different approaches for ascribing responsibilities have different implications for engineering practice in general, and R&D or technological design in particular. It was found that there was a tension between the demands that follow from these different approaches, most notably between efficacy and fairness. Although the consequentialist approach with its efficacy criterion turned out to be most powerful, it was also shown that the fairness of responsibility ascriptions should somehow be taken into account. It is proposed to look for alternative, more procedural ways to approach the fairness of responsibility ascriptions. © The Author(s) 2009. This article is published with open access at Springerlink.com

An Information Technology Architecture for Pharmaceutical Research and Development

PubMed Central

Klingler, Daniel E.; Jaffe, Marvin E.

1990-01-01

Rationale for and development of an information technology architecture are presented. The architectural approach described produces a technology environment that is integrating, flexible, robust, productive, and future-oriented. Issues accompanying architecture development and potential impediments to success are discussed.

Ethical Considerations in Technology Transfer.

ERIC Educational Resources Information Center

Froehlich, Thomas J.

1991-01-01

Examines ethical considerations involved in the transfer of appropriate information technology to less developed countries. Approaches to technology are considered; two philosophical frameworks for studying ethical considerations are discussed, i.e., the Kantian approach and the utilitarian perspective by John Stuart Mill; and integration of the…

A Manpower Development Model for an Emerging Technology: A Systems Approach to Curriculum Development for Solar Technician Training.

ERIC Educational Resources Information Center

Green, C. Paul; Orsak, Charles G.

Undertaking of a systems approach to curriculum development for solar training led to (1) a feasibility study to determine the role of the community college in solar energy technology, (2) a market analysis to determine the manpower need, and (3) a task analysis for development of a curriculum for training solar energy technicians at Navarro…

Risk Management of New Microelectronics for NASA: Radiation Knowledge-base

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.

2004-01-01

Contents include the following: NASA Missions - implications to reliability and radiation constraints. Approach to Insertion of New Technologies Technology Knowledge-base development. Technology model/tool development and validation. Summary comments.

Nuclear Proliferation Technology Trends Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zentner, Michael D.; Coles, Garill A.; Talbert, Robert J.

2005-10-04

A process is underway to develop mature, integrated methodologies to address nonproliferation issues. A variety of methodologies (both qualitative and quantitative) are being considered. All have one thing in common, a need for a consistent set of proliferation related data that can be used as a basis for application. One approach to providing a basis for predicting and evaluating future proliferation events is to understand past proliferation events, that is, the different paths that have actually been taken to acquire or attempt to acquire special nuclear material. In order to provide this information, this report describing previous material acquisition activitiesmore » (obtained from open source material) has been prepared. This report describes how, based on an evaluation of historical trends in nuclear technology development, conclusions can be reached concerning: (1) The length of time it takes to acquire a technology; (2) The length of time it takes for production of special nuclear material to begin; and (3) The type of approaches taken for acquiring the technology. In addition to examining time constants, the report is intended to provide information that could be used to support the use of the different non-proliferation analysis methodologies. Accordingly, each section includes: (1) Technology description; (2) Technology origin; (3) Basic theory; (4) Important components/materials; (5) Technology development; (6) Technological difficulties involved in use; (7) Changes/improvements in technology; (8) Countries that have used/attempted to use the technology; (9) Technology Information; (10) Acquisition approaches; (11) Time constants for technology development; and (12) Required Concurrent Technologies.« less

A Different Approach to Have Science and Technology Student-Teachers Gain Varied Methods in Laboratory Applications: A Sample of Computer Assisted POE Application

ERIC Educational Resources Information Center

Saka, Arzu

2012-01-01

The purpose of this study is to develop a new approach and assess the application for the science and technology student-teachers to gain varied laboratory methods in science and technology teaching. It is also aimed to describe the computer-assisted POE application in the subject of "Photosynthesis-Light" developed in the context of…

ATDRS payload technology research and development

NASA Technical Reports Server (NTRS)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

1990-01-01

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

New light field camera based on physical based rendering tracing

NASA Astrophysics Data System (ADS)

Chung, Ming-Han; Chang, Shan-Ching; Lee, Chih-Kung

2014-03-01

Even though light field technology was first invented more than 50 years ago, it did not gain popularity due to the limitation imposed by the computation technology. With the rapid advancement of computer technology over the last decade, the limitation has been uplifted and the light field technology quickly returns to the spotlight of the research stage. In this paper, PBRT (Physical Based Rendering Tracing) was introduced to overcome the limitation of using traditional optical simulation approach to study the light field camera technology. More specifically, traditional optical simulation approach can only present light energy distribution but typically lack the capability to present the pictures in realistic scenes. By using PBRT, which was developed to create virtual scenes, 4D light field information was obtained to conduct initial data analysis and calculation. This PBRT approach was also used to explore the light field data calculation potential in creating realistic photos. Furthermore, we integrated the optical experimental measurement results with PBRT in order to place the real measurement results into the virtually created scenes. In other words, our approach provided us with a way to establish a link of virtual scene with the real measurement results. Several images developed based on the above-mentioned approaches were analyzed and discussed to verify the pros and cons of the newly developed PBRT based light field camera technology. It will be shown that this newly developed light field camera approach can circumvent the loss of spatial resolution associated with adopting a micro-lens array in front of the image sensors. Detailed operational constraint, performance metrics, computation resources needed, etc. associated with this newly developed light field camera technique were presented in detail.

A Systematic Framework of Virtual Laboratories Using Mobile Agent and Design Pattern Technologies

ERIC Educational Resources Information Center

Li, Yi-Hsung; Dow, Chyi-Ren; Lin, Cheng-Min; Chen, Sheng-Chang; Hsu, Fu-Wei

2009-01-01

Innovations in network and information technology have transformed traditional classroom lectures into new approaches that have given universities the opportunity to create a virtual laboratory. However, there is no systematic framework in existing approaches for the development of virtual laboratories. Further, developing a virtual laboratory…

Midstream Modulation of Technology: Governance from Within

ERIC Educational Resources Information Center

Fisher, Erik; Mahajan, Roop L.; Mitcham, Carl

2006-01-01

Public "upstream engagement" and other approaches to the social control of technology are currently receiving international attention in policy discourses around emerging technologies such as nanotechnology. To the extent that such approaches hold implications for research and development (R&D) activities, the distinct participation of scientists…

Way Forward for High Performance Payload Processing Development

NASA Astrophysics Data System (ADS)

Notebaert, Olivier; Franklin, John; Lefftz, Vincent; Moreno, Jose; Patte, Mathieu; Syed, Mohsin; Wagner, Arnaud

2012-08-01

Payload processing is facing technological challenges due to the large increase of performance requirements of future scientific, observation and telecom missions as well as the future instruments technologies capturing much larger amount of data. For several years, with the perspective of higher performance together with the planned obsolescence of solutions covering the current needs, ESA and the European space industry has been developing several technology solutions. Silicon technologies, radiation mitigation techniques and innovative functional architectures are developed with the goal of designing future space qualified processing devices with a much higher level of performance than today. The fast growing commercial market application have developed very attractive technologies but which are not fully suitable with respect to their tolerance to space environment. Without the financial capacity to explore and develop all possible technology paths, a specific and global approach is required to cover the future mission needs and their necessary performance targets with effectiveness.The next sections describe main issues and priorities and provides further detailed relevant for this approach covering the high performance processing technology.

A formulation of multidimensional growth models for the assessment and forecast of technology attributes

NASA Astrophysics Data System (ADS)

Danner, Travis W.

Developing technology systems requires all manner of investment---engineering talent, prototypes, test facilities, and more. Even for simple design problems the investment can be substantial; for complex technology systems, the development costs can be staggering. The profitability of a corporation in a technology-driven industry is crucially dependent on maximizing the effectiveness of research and development investment. Decision-makers charged with allocation of this investment are forced to choose between the further evolution of existing technologies and the pursuit of revolutionary technologies. At risk on the one hand is excessive investment in an evolutionary technology which has only limited availability for further improvement. On the other hand, the pursuit of a revolutionary technology may mean abandoning momentum and the potential for substantial evolutionary improvement resulting from the years of accumulated knowledge. The informed answer to this question, evolutionary or revolutionary, requires knowledge of the expected rate of improvement and the potential a technology offers for further improvement. This research is dedicated to formulating the assessment and forecasting tools necessary to acquire this knowledge. The same physical laws and principles that enable the development and improvement of specific technologies also limit the ultimate capability of those technologies. Researchers have long used this concept as the foundation for modeling technological advancement through extrapolation by analogy to biological growth models. These models are employed to depict technology development as it asymptotically approaches limits established by the fundamental principles on which the technological approach is based. This has proven an effective and accurate approach to modeling and forecasting simple single-attribute technologies. With increased system complexity and the introduction of multiple system objectives, however, the usefulness of this modeling technique begins to diminish. With the introduction of multiple objectives, researchers often abandon technology growth models for scoring models and technology frontiers. While both approaches possess advantages over current growth models for the assessment of multi-objective technologies, each lacks a necessary dimension for comprehensive technology assessment. By collapsing multiple system metrics into a single, non-intuitive technology measure, scoring models provide a succinct framework for multi-objective technology assessment and forecasting. Yet, with no consideration of physical limits, scoring models provide no insight as to the feasibility of a particular combination of system capabilities. They only indicate that a given combination of system capabilities yields a particular score. Conversely, technology frontiers are constructed with the distinct objective of providing insight into the feasibility of system capability combinations. Yet again, upper limits to overall system performance are ignored. Furthermore, the data required to forecast subsequent technology frontiers is often inhibitive. In an attempt to reincorporate the fundamental nature of technology advancement as bound by physical principles, researchers have sought to normalize multi-objective systems whereby the variability of a single system objective is eliminated as a result of changes in the remaining objectives. This drastically limits the applicability of the resulting technology model because it is only applicable for a single setting of all other system attributes. Attempts to maintain the interaction between the growth curves of each technical objective of a complex system have thus far been limited to qualitative and subjective consideration. This research proposes the formulation of multidimensional growth models as an approach to simulating the advancement of multi-objective technologies towards their upper limits. Multidimensional growth models were formulated by noticing and exploiting the correlation between technology growth models and technology frontiers. Both are frontiers in actuality. The technology growth curve is a frontier between capability levels of a single attribute and time, while a technology frontier is a frontier between the capability levels of two or more attributes. Multidimensional growth models are formulated by exploiting the mathematical significance of this correlation. The result is a model that can capture both the interaction between multiple system attributes and their expected rates of improvement over time. The fundamental nature of technology development is maintained, and interdependent growth curves are generated for each system metric with minimal data requirements. Being founded on the basic nature of technology advancement, relative to physical limits, the availability for further improvement can be determined for a single metric relative to other system measures of merit. A by-product of this modeling approach is a single n-dimensional technology frontier linking all n system attributes with time. This provides an environment capable of forecasting future system capability in the form of advancing technology frontiers. The ability of a multidimensional growth model to capture the expected improvement of a specific technological approach is dependent on accurately identifying the physical limitations to each pertinent attribute. This research investigates two potential approaches to identifying those physical limits, a physics-based approach and a regression-based approach. The regression-based approach has found limited acceptance among forecasters, although it does show potential for estimating upper limits with a specified degree of uncertainty. Forecasters have long favored physics-based approaches for establishing the upper limit to unidimensional growth models. The task of accurately identifying upper limits has become increasingly difficult with the extension of growth models into multiple dimensions. A lone researcher may be able to identify the physical limitation to a single attribute of a simple system; however, as system complexity and the number of attributes increases, the attention of researchers from multiple fields of study is required. Thus, limit identification is itself an area of research and development requiring some level of investment. Whether estimated by physics or regression-based approaches, predicted limits will always have some degree of uncertainty. This research takes the approach of quantifying the impact of that uncertainty on model forecasts rather than heavily endorsing a single technique to limit identification. In addition to formulating the multidimensional growth model, this research provides a systematic procedure for applying that model to specific technology architectures. Researchers and decision-makers are able to investigate the potential for additional improvement within that technology architecture and to estimate the expected cost of each incremental improvement relative to the cost of past improvements. In this manner, multidimensional growth models provide the necessary information to set reasonable program goals for the further evolution of a particular technological approach or to establish the need for revolutionary approaches in light of the constraining limits of conventional approaches.

Technology Developments in Radiation-Hardened Electronics for Space Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Howell, Joe T.

2008-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project consists of a series of tasks designed to develop and mature a broad spectrum of radiation hardened and low temperature electronics technologies. Three approaches are being taken to address radiation hardening: improved material hardness, design techniques to improve radiation tolerance, and software methods to improve radiation tolerance. Within these approaches various technology products are being addressed including Field Programmable Gate Arrays (FPGA), Field Programmable Analog Arrays (FPAA), MEMS, Serial Processors, Reconfigurable Processors, and Parallel Processors. In addition to radiation hardening, low temperature extremes are addressed with a focus on material and design approaches. System level applications for the RHESE technology products are discussed.

The New Technology: Agent of Transformation.

ERIC Educational Resources Information Center

Lowenstein, Ronnie; Barbee, David E.

New technologies available today can be used to improve accountability, establish and manage learning environments, and extend contextual learning. To harness these technologies, however, beliefs and practices must be redefined in education, training, and human development. If technology is developed according to a systems approach, new…

Faculty Professional Development for Quality Online Teaching

ERIC Educational Resources Information Center

Alexiou-Ray, Jennifer; Bentley, Courtney C.

2015-01-01

Meaningful technology use in education continues to improve given an increase in access to available technologies and professional development. For educators, professional development has focused on approaches for technology use that foster content-specific best practices and improve student learning in traditional classroom formats. Meaningful…

Identifying consumer's needs of health information technology through an innovative participatory design approach among English- and Spanish-speaking urban older adults.

PubMed

Lucero, R; Sheehan, B; Yen, P; Velez, O; Nobile-Hernandez, D; Tiase, V

2014-01-01

We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant's needs related to information technology. The C2PD approach enabled the assessment and identification of informant's needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer's technology needs while taking into account core public health functions.

Identifying Consumer’s Needs of Health Information Technology through an Innovative Participatory Design Approach among English- and Spanish-speaking Urban Older Adults

PubMed Central

Sheehan, B.; Yen, P.; Velez, O.; Nobile-Hernandez, D.; Tiase, V.

2014-01-01

Summary Objectives We describe an innovative community-centered participatory design approach, Consumer-centered Participatory Design (C2PD), and the results of applying C2PD to design and develop a web-based fall prevention system. Methods We conducted focus groups and design sessions with English- and Spanish-speaking community-dwelling older adults. Focus group data were summarized and used to inform the context of the design sessions. Descriptive content analysis methods were used to develop categorical descriptions of design session informant’s needs related to information technology. Results The C2PD approach enabled the assessment and identification of informant’s needs of health information technology (HIT) that informed the development of a falls prevention system. We learned that our informants needed a system that provides variation in functions/content; differentiates between actionable/non-actionable information/structures; and contains sensory cues that support wide-ranging and complex tasks in a varied, simple, and clear interface to facilitate self-management. Conclusions The C2PD approach provides community-based organizations, academic researchers, and commercial entities with a systematic theoretically informed approach to develop HIT innovations. Our community-centered participatory design approach focuses on consumer’s technology needs while taking into account core public health functions. PMID:25589909

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne L.

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne Leland

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Instructional Systems Study, Electronics Technology.

ERIC Educational Resources Information Center

Waukesha County Technical Inst., Waukesha, WI.

Because of shortcomings in the traditional approach to instruction and learning at Waukesha County Technical Institute in Wisconsin, this research was conducted to determine the effectiveness of an alternate approach to instruction in electronics technology. The "Closed Loop Systems Approach to Instruction" developed for this study was derived…

Technology-enhanced teacher development in rural Bangladesh: A critical realist evaluation of the context.

PubMed

Jamil, Md Golam

2018-08-01

This study arose in response to the complexity of implementing technology-enhanced learning for teacher development in a developing country. Bangladesh is a country with growing technological capacity including mobile phone network coverage, yet it faces vast challenges of utilising these facilities in the education sector. As educational change and technological innovation do not happen in a vacuum, the researcher used a critical realist approach to understand the layers of the rural Bangladesh context where technology-enhanced learning will take place. Findings have been drawn from survey data (n = 207) and a series of six focus group sessions with the same six stakeholders, informing future technology-enhanced teacher development programmes. The implications of the study are to suggest principles for pedagogical change and a methodological approach which attends to context. Copyright © 2018 Elsevier Ltd. All rights reserved.

Modern Gemini-Approach to Technology Development for Human Space Exploration

NASA Technical Reports Server (NTRS)

White, Harold

2010-01-01

In NASA's plan to put men on the moon, there were three sequential programs: Mercury, Gemini, and Apollo. The Gemini program was used to develop and integrate the technologies that would be necessary for the Apollo program to successfully put men on the moon. We would like to present an analogous modern approach that leverages legacy ISS hardware designs, and integrates developing new technologies into a flexible architecture This new architecture is scalable, sustainable, and can be used to establish human exploration infrastructure beyond low earth orbit and into deep space.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

An Ethical Framework for Evaluating Experimental Technology.

PubMed

van de Poel, Ibo

2016-06-01

How are we to appraise new technological developments that may bring revolutionary social changes? Currently this is often done by trying to predict or anticipate social consequences and to use these as a basis for moral and regulatory appraisal. Such an approach can, however, not deal with the uncertainties and unknowns that are inherent in social changes induced by technological development. An alternative approach is proposed that conceives of the introduction of new technologies into society as a social experiment. An ethical framework for the acceptability of such experiments is developed based on the bioethical principles for experiments with human subjects: non-maleficence, beneficence, respect for autonomy, and justice. This provides a handle for the moral and regulatory assessment of new technologies and their impact on society.

Use of Digital Storytelling in Biology Teaching

ERIC Educational Resources Information Center

Karakoyun, Ferit; Yapici, I. Ümit

2016-01-01

With the technological developments in the 21st century, it is now necessary to integrate technological renovations effectively into teaching-learning environments. There are several approaches that allow integration of technology into teaching-learning environments. One of these approaches is digital storytelling. The purpose of this study was to…

Information and Communication Technology in the Israeli Educational System: Past, Present and Future.

ERIC Educational Resources Information Center

Katz, Yaacov J.

2002-01-01

Describes the development of the use of information and communication technology (ICT) in the Israeli educational system. Discusses a behaviorist approach to computer assisted instruction; open-ended courseware; constructivist approaches to multimedia, including simulations, modeling, and virtual reality; technology-based distance learning; and…

Pedagogy First: Realising Technology Enhanced Learning by Focusing on Teaching Practice

ERIC Educational Resources Information Center

Glover, Ian; Hepplestone, Stuart; Parkin, Helen J.; Rodger, Helen; Irwin, Brian

2016-01-01

This paper explores a "pedagogy first" approach to technology enhanced learning developed by Sheffield Hallam University (SHU) as a method to encourage use of, and experimentation with, technology within teaching practice and to promote the mainstreaming of innovative practice. Through a consultative approach where all staff members were…

A Critical Approach To Teaching Educational Technology.

ERIC Educational Resources Information Center

Nichols, Randall G.

In this paper, an educational technologist describes his critical approach to using computers in instruction. He discusses his development from high school English teacher to educational technology instructor in a university setting, focusing on people, literature, and films that have shaped his view of technology as well as on his disappointment…

Developing Emotion-Aware, Advanced Learning Technologies: A Taxonomy of Approaches and Features

ERIC Educational Resources Information Center

Harley, Jason M.; Lajoie, Susanne P.; Frasson, Claude; Hall, Nathan C.

2017-01-01

A growing body of work on intelligent tutoring systems, affective computing, and artificial intelligence in education is exploring creative, technology-driven approaches to enhance learners' experience of adaptive, positively-valenced emotions while interacting with advanced learning technologies. Despite this, there has been no published work to…

A Re-Evaluation of Mobile Communication Technology: A Theoretical Approach for Technology Evaluation in Contemporary Digital Learning

ERIC Educational Resources Information Center

Yumurtaci, Onur

2017-01-01

We live in an age of continual technological development. Rapidly developing technologies have found use in nearly all aspects of life. As such, it is understandable that technology has also infiltrated the field of education. Information and Communication Technology (ICT) has provided us with the technical underpinnings for distance and lifelong…

An integrated systems-based approach to mercury research and technology development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, Mark J; Brooks, Scott C; Mathews, Teresa J

A 3-year strategic planning process was undertaken in Oak Ridge, Tennessee, to develop a research and technology development approach that can help guide mercury remediation in East Fork Poplar Creek (EFPC). Mercury remediation is a high priority for the US Department of Energy s (DOE s) Oak Ridge Office of Environmental Management because of large historical losses of mercury to the environment at the Y-12 National Security Complex (Y-12). Because of the extent of mercury losses and the complexities of mercury transport and fate in the stream environment, the success of conventional options for mercury remediation in the downstream sectionsmore » of EFPC is uncertain. The overall Oak Ridge mercury remediation strategy focuses on mercury treatment actions at Y-12 in the short-term and research and technology development to evaluate longer-term solutions in the downstream environment. The technology development strategy is consistent with a phased, adaptive management paradigm and DOE s Technology Readiness Level guidelines. That is, early evaluation includes literature review, site characterization, and small-scale studies of a broad number of potential technologies. As more information is gathered, technologies that may have the most promise and potential remediation benefit will be chosen for more extensive and larger-scale pilot testing before being considered for remedial implementation. Field and laboratory research in EFPC is providing an improved level of understanding of mercury transport and fate processes in EFPC that will inform the development of site-specific remedial technologies. Technology development has centered on developing strategies that can mitigate the primary factors affecting mercury risks in the stream: (1) the amount of inorganic mercury available to the stream system, (2) the conversion of inorganic mercury to methylmercury, and (3) the bioaccumulation of methylmercury through the food web. Given the downstream complexities and interdependencies between sources and processes in EFPC, no one task or approach is likely to solve the mercury problem in the creek, thus highlighting the importance of using an integrated, systems-based approach to develop remedial solutions.« less

Entropy and gravity concepts as new methodological indexes to investigate technological convergence: patent network-based approach.

PubMed

Cho, Yongrae; Kim, Minsung

2014-01-01

The volatility and uncertainty in the process of technological developments are growing faster than ever due to rapid technological innovations. Such phenomena result in integration among disparate technology fields. At this point, it is a critical research issue to understand the different roles and the propensity of each element technology for technological convergence. In particular, the network-based approach provides a holistic view in terms of technological linkage structures. Furthermore, the development of new indicators based on network visualization can reveal the dynamic patterns among disparate technologies in the process of technological convergence and provide insights for future technological developments. This research attempts to analyze and discover the patterns of the international patent classification codes of the United States Patent and Trademark Office's patent data in printed electronics, which is a representative technology in the technological convergence process. To this end, we apply the physical idea as a new methodological approach to interpret technological convergence. More specifically, the concepts of entropy and gravity are applied to measure the activities among patent citations and the binding forces among heterogeneous technologies during technological convergence. By applying the entropy and gravity indexes, we could distinguish the characteristic role of each technology in printed electronics. At the technological convergence stage, each technology exhibits idiosyncratic dynamics which tend to decrease technological differences and heterogeneity. Furthermore, through nonlinear regression analysis, we have found the decreasing patterns of disparity over a given total period in the evolution of technological convergence. This research has discovered the specific role of each element technology field and has consequently identified the co-evolutionary patterns of technological convergence. These new findings on the evolutionary patterns of technological convergence provide some implications for engineering and technology foresight research, as well as for corporate strategy and technology policy.

National Alliance for Advanced Biofuels and Bio-Products Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olivares, Jose A.; Baxter, Ivan; Brown, Judith

2014-09-30

The main objective of NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. The approach was to address technology development across the entire value chain of algal biofuels production, from selection of strains to cultivation, harvesting, extraction, fuel conversion, and agricultural coproduct production. Sustainable practices and financial feasibility assessments ununderscored the approach and drove the technology development.

Orally disintegrating dosage forms and taste-masking technologies; 2010.

PubMed

Douroumis, Dennis

2011-05-01

In the last decade the development of orally disintegrating tablets (ODTs) and thin-film platforms has grown enormously in the field of pharmaceutical industry. A wide variety of new masking technologies combined with the aforementioned platforms have been developed in order to mask the taste of bitter active substances and achieve patient compliance. The commercial success and viability of such products requires the development of robust formulations with excellent palatability, disintegration times, physicochemical stability and pharmacokinetic profiles. In this review, emerging taste-masking technologies applied to solid dosage form manufacturing are summarized. The unique features and principles of taste-masking approaches used with ODT platforms are discussed, including the advantages and limitations of each technology. A brief discussion is also included on the taste masking of thin-film technologies, owing to their similar applications and requirements. This review elucidates the unique features of current commercially available or highly promising ODT and thin-film technologies, along with taste-masking approaches used in the manufacturing of oral solid dosage forms. A better understanding of these drug delivery approaches will help researchers to select the appropriate platform, or to develop innovative products with improved safety, compliance and clinical value.

Nature of Technology: Implications for Design, Development, and Enactment of Technological Tools in School Science Classrooms

ERIC Educational Resources Information Center

Waight, Noemi; Abd-El-Khalick, Fouad

2012-01-01

This position paper provides a theory-based explanation informed by philosophy of technology (PoT) of the recurrent documented patterns often associated with attempts to enact technology-supported, inquiry-based approaches in precollege science classrooms. Understandings derived from the history of technological development in other domains (e.g.…

Structures and materials technology needs for communications and remote sensing spacecraft

NASA Technical Reports Server (NTRS)

Gronet, M. J.; Jensen, G. A.; Hoskins, J. W.

1995-01-01

This report documents trade studies conducted from the perspective of a small spacecraft developer to determine and quantify the structures and structural materials technology development needs for future commercial and NASA small spacecraft to be launched in the period 1999 to 2005. Emphasis is placed on small satellites weighing less than 1800 pounds for two focus low-Earth orbit missions: commercial communications and remote sensing. The focus missions are characterized in terms of orbit, spacecraft size, performance, and design drivers. Small spacecraft program personnel were interviewed to determine their technology needs, and the results are summarized. A systems-analysis approach for quantifying the benefits of inserting advanced state-of-the-art technologies into a current reference, state-of-the-practice small spacecraft design is developed and presented. This approach is employed in a set of abbreviated trade studies to quantify the payoffs of using a subset of 11 advanced technologies selected from the interview results The 11 technology development opportunities are then ranked based on their relative payoff. Based on the strong potential for significant benefits, recommendations are made to pursue development of 8 and the 11 technologies. Other important technology development areas identified are recommended for further study.

Approach to developing reliable space reactor power systems

NASA Technical Reports Server (NTRS)

Mondt, Jack F.; Shinbrot, Charles H.

1991-01-01

During Phase II, the Engineering Development Phase, the SP-100 Project has defined and is pursuing a new approach to developing reliable power systems. The approach to developing such a system during the early technology phase is described along with some preliminary examples to help explain the approach. Developing reliable components to meet space reactor power system requirements is based on a top-down systems approach which includes a point design based on a detailed technical specification of a 100-kW power system. The SP-100 system requirements implicitly recognize the challenge of achieving a high system reliability for a ten-year lifetime, while at the same time using technologies that require very significant development efforts. A low-cost method for assessing reliability, based on an understanding of fundamental failure mechanisms and design margins for specific failure mechanisms, is being developed as part of the SP-100 Program.

Software technology insertion: A study of success factors

NASA Technical Reports Server (NTRS)

Lydon, Tom

1990-01-01

Managing software development in large organizations has become increasingly difficult due to increasing technical complexity, stricter government standards, a shortage of experienced software engineers, competitive pressure for improved productivity and quality, the need to co-develop hardware and software together, and the rapid changes in both hardware and software technology. The 'software factory' approach to software development minimizes risks while maximizing productivity and quality through standardization, automation, and training. However, in practice, this approach is relatively inflexible when adopting new software technologies. The methods that a large multi-project software engineering organization can use to increase the likelihood of successful software technology insertion (STI), especially in a standardized engineering environment, are described.

A new technology perspective and engineering tools approach for large, complex and distributed mission and safety critical systems components

NASA Technical Reports Server (NTRS)

Carrio, Miguel A., Jr.

1988-01-01

Rapidly emerging technology and methodologies have out-paced the systems development processes' ability to use them effectively, if at all. At the same time, the tools used to build systems are becoming obsolescent themselves as a consequence of the same technology lag that plagues systems development. The net result is that systems development activities have not been able to take advantage of available technology and have become equally dependent on aging and ineffective computer-aided engineering tools. New methods and tools approaches are essential if the demands of non-stop and Mission and Safety Critical (MASC) components are to be met.

Teaching with Technology in Higher Education: Understanding Conceptual Change and Development in Practice

ERIC Educational Resources Information Center

Englund, Claire; Olofsson, Anders D.; Price, Linda

2017-01-01

Research indicates that teachers' conceptions of and approaches to teaching with technology are central for the successful imple-mentation of educational technologies in higher education. This study advances this premise. We present a 10-year longitudinal study examining teachers' conceptions of and approaches to teaching and learning with…

Contribution of high-content imaging technologies to the development of anti-infective drugs.

PubMed

Ang, Michelle Lay Teng; Pethe, Kevin

2016-08-01

Originally developed to study fundamental aspects of cellular biology, high-content imaging (HCI) was rapidly adapted to study host-pathogen interactions at the cellular level and adopted as a technology of choice to unravel disease biology. HCI platforms allow for the visualization and quantification of discrete phenotypes that cannot be captured using classical screening approaches. A key advantage of high-content screening technologies lies in the possibility to develop and interrogate physiologically significant, predictive ex vivo disease models that reproduce complex conditions relevant for infection. Here we review and discuss recent advances in HCI technologies and chemical biology approaches that are contributing to an increased understanding of the intricate host-pathogen interrelationship on the cellular level, and which will foster the development of novel therapeutic approaches for the treatment of human bacterial and protozoan infections. © 2016 The Authors. Cytometry Part A published by Wiley Periodicals, Inc. on behalf of ISAC. © 2016 The Authors. Cytometry Part A published by Wiley Periodicals, Inc. on behalf of ISAC.

Information and Rural Development.

ERIC Educational Resources Information Center

Storm, Bonnie L.

1982-01-01

Outlines approaches taken to development in lesser developed countries in the past, discusses the importance of appropriate technology and human development, and summarizes the information needs of the rural poor in developing nations. Information dissemination programs using video- and audiotape technology in Bangladesh, Guatemala, and Peru are…

System driven technology selection for future European launch systems

NASA Astrophysics Data System (ADS)

Baiocco, P.; Ramusat, G.; Sirbi, A.; Bouilly, Th.; Lavelle, F.; Cardone, T.; Fischer, H.; Appel, S.

2015-02-01

In the framework of the next generation launcher activity at ESA, a top-down approach and a bottom-up approach have been performed for the identification of promising technologies and alternative conception of future European launch vehicles. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been focused on the future launch vehicle technologies. Preliminary specifications have been used in order to permit sub-system design to find the major benefit for the overall launch system. The development cost, non-recurring and recurring cost, industrialization and operational aspects have been considered as competitiveness factors for the identification and down-selection of the most interesting technologies. The recurring cost per unit payload mass has been evaluated. The TRL/IRL has been assessed and a preliminary development plan has been traced for the most promising technologies. The potentially applicable launch systems are Ariane and VEGA evolution. The main FLPP technologies aim at reducing overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic hydrogen and oxygen propellants, propellant management subsystems, elements significantly reducing fabrication and operational costs, avionics, pyrotechnics, etc. to derive performing upper and booster stages. Application of the system driven approach allows creating performing technology demonstrators in terms of need, demonstration objective, size and cost. This paper outlines the process of technology down selection using a system driven approach, the accomplishments already achieved in the various technology fields up to now, as well as the potential associated benefit in terms of competitiveness factors.

Overview of NASA/OAST efforts related to manufacturing technology

NASA Technical Reports Server (NTRS)

Saunders, N. T.

1976-01-01

Activities of the Office of Aeronautics and Space Technology (OAST) in a number of areas related to manufacturing technology are considered. In the computer-aided design area improved approaches are developed for the design of specific classes of components or structural subsystems. A generalized approach for the design of a complete aerospace vehicle is also developed. Efforts directed toward an increased use of composite materials in aerospace structures are also discussed and attention is given to projects concerned with the manufacture of turbine engine components.

Living Lab as an Agile Approach in Developing User-Friendly Welfare Technology.

PubMed

Holappa, Niina; Sirkka, Andrew

2017-01-01

This paper discusses living lab as a method of developing user-friendly welfare technology, and presents a qualitative evaluation research of how living lab tested technologies impacted on the life of healthcare customers and professionals over test periods.

Designing medical technology for resilience: integrating health economics and human factors approaches.

PubMed

Borsci, Simone; Uchegbu, Ijeoma; Buckle, Peter; Ni, Zhifang; Walne, Simon; Hanna, George B

2018-01-01

The slow adoption of innovation into healthcare calls into question the manner of evidence generation for medical technology. This paper identifies potential reasons for this including a lack of attention to human factors, poor evaluation of economic benefits, lack of understanding of the existing healthcare system and a failure to recognise the need to generate resilient products. Areas covered: Recognising a cross-disciplinary need to enhance evidence generation early in a technology's life cycle, the present paper proposes a new approach that integrates human factors and health economic evaluation as part of a wider systems approach to the design of technology. This approach (Human and Economic Resilience Design for Medical Technology or HERD MedTech) supports early stages of product development and is based on the recent experiences of the National Institute for Health Research London Diagnostic Evidence Co-operative in the UK. Expert commentary: HERD MedTech i) proposes a shift from design for usability to design for resilience, ii) aspires to reduce the need for service adaptation to technological constraints iii) ensures value of innovation at the time of product development, and iv) aims to stimulate discussion around the integration of pre- and post-market methods of assessment of medical technology.

The GETE approach to facilitating the commercialization and use of DOE-developed environmental technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, T.N.

The Global Environmental Technology Enterprise (GETE) was conceived to develop and implement strategies to facilitate the commercialization of innovative, cost-effective Department of Energy (DOE)-developed environmental technologies. These strategies are needed to aid DOE`s clean-up mission; to break down barriers to commercialization; and to build partnerships between the federal government and private industry in order to facilitate the development and use of innovative environmental technologies.

NASA Workshop on Technology for Human Robotic Exploration and Development of Space

NASA Technical Reports Server (NTRS)

Mankins, J. C.; Marzwell, N.; Mullins, C. A.; Christensen, C. B.; Howell, J. T.; O'Neil, D. A.

2004-01-01

Continued constrained budgets and growing interests in the industrialization and development of space requires NASA to seize every opportunity for assuring the maximum return on space infrastructure investments. This workshop provided an excellent forum for reviewing, evaluating, and updating pertinent strategic planning, identifying advanced concepts and high-risk/high-leverage research and technology requirements, developing strategies and roadmaps, and establishing approaches, methodologies, modeling, and tools for facilitating the commercial development of space and supporting diverse exploration and scientific missions. Also, the workshop addressed important topic areas including revolutionary space systems requiring investments in innovative advanced technologies; achieving transformational space operations through the insertion of new technologies; revolutionary science in space through advanced systems and new technologies enabling experiments to go anytime to any location; and, innovative and ambitious concepts and approaches essential for promoting advancements in space transportation. Details concerning the workshop process, structure, and results are contained in the ensuing report.

Principles for fostering the transdisciplinary development of assistive technologies.

PubMed

Boger, Jennifer; Jackson, Piper; Mulvenna, Maurice; Sixsmith, Judith; Sixsmith, Andrew; Mihailidis, Alex; Kontos, Pia; Miller Polgar, Janice; Grigorovich, Alisa; Martin, Suzanne

2017-07-01

Developing useful and usable assistive technologies often presents complex (or "wicked") challenges that require input from multiple disciplines and sectors. Transdisciplinary collaboration can enable holistic understanding of challenges that may lead to innovative, impactful and transformative solutions. This paper presents generalised principles that are intended to foster transdisciplinary assistive technology development. The paper introduces the area of assistive technology design before discussing general aspects of transdisciplinary collaboration followed by an overview of relevant concepts, including approaches, methodologies and frameworks for conducting and evaluating transdisciplinary working and assistive technology design. The principles for transdisciplinary development of assistive technologies are presented and applied post hoc to the COACH project, an ambient-assisted living technology for guiding completion of activities of daily living by older adults with dementia as an illustrative example. Future work includes the refinement and validation of these principles through their application to real-world transdisciplinary assistive technology projects. Implications for rehabilitation Transdisciplinarity encourages a focus on real world 'wicked' problems. A transdisciplinary approach involves transcending disciplinary boundaries and collaborating with interprofessional and community partners (including the technology's intended users) on a shared problem. Transdisciplinarity fosters new ways of thinking about and doing research, development, and implementation, expanding the scope, applicability, and commercial viability of assistive technologies.

Environmental restoration and waste management: Robotics technology development program: Robotics 5-year program plan. [Contains glossary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This plan covers robotics Research, Development, Demonstration, Testing, activities in the Program for the next five years. These activities range from bench-scale R D to fullscale hot demonstrations at DOE sites. This plan outlines applications of existing technology to near-term needs, the development and application of enhanced technology for longer-term needs, and an initiation of advanced technology development to meet those needs beyond the five-year plan. The objective of the Robotic Technology Development (RTDP) is to develop and apply robotics technologies that will enable Environmental Restoration and Waste Management operations at DOE sites to be safer, faster and cheaper. Fivemore » priority DOE sites were visited in March 1990 to identify needs for robotics technology in ER WM operations. This 5-Year Program Plan for the RTDP detailed annual plans for robotics technology development based on identified needs. This 5-Year Program Plan discusses the overall approach to be adopted by the RTDP to aggressively develop robotics technology and contains discussions of the Program Management Plan, Site Visit and Needs Summary, Approach to Needs-Directed Technical Development, Application-Specific Technical Development, and Cross-Cutting and Advanced Technology. Integrating application-specific ER WM needs, the current state of robotics technology, and the potential benefits (in terms of faster, safer, and cheaper) of new technology, the Plan develops application-specific road maps for robotics RDDT E for the period FY 1991 through FY 1995. In addition, the Plan identifies areas where longer-term research in robotics will have a high payoff in the 5- to 20-year time frame. 12 figs.« less

Human Factors for More Usable and Safer Health Information Technology: Where Are We Now and Where do We Go from Here?

PubMed

Kushniruk, A; Nohr, C; Borycki, E

2016-11-10

A wide range of human factors approaches have been developed and adapted to healthcare for detecting and mitigating negative unexpected consequences associated with technology in healthcare (i.e. technology-induced errors). However, greater knowledge and wider dissemination of human factors methods is needed to ensure more usable and safer health information technology (IT) systems. This paper reports on work done by the IMIA Human Factors Working Group and discusses some successful approaches that have been applied in using human factors to mitigate negative unintended consequences of health IT. The paper addresses challenges in bringing human factors approaches into mainstream health IT development. A framework for bringing human factors into the improvement of health IT is described that involves a multi-layered systematic approach to detecting technology-induced errors at all stages of a IT system development life cycle (SDLC). Such an approach has been shown to be needed and can lead to reduced risks associated with the release of health IT systems into live use with mitigation of risks of negative unintended consequences. Negative unintended consequences of the introduction of IT into healthcare (i.e. potential for technology-induced errors) continue to be reported. It is concluded that methods and approaches from the human factors and usability engineering literatures need to be more widely applied, both in the vendor community and in local and regional hospital and healthcare settings. This will require greater efforts at dissemination and knowledge translation, as well as greater interaction between the academic and vendor communities.

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

Replicated x-ray optics for space applications

NASA Astrophysics Data System (ADS)

Hudec, René; Pína, Ladislav; Inneman, Adolf

2017-11-01

We report on the program of design and development of X-ray optics for space applications in the Czech Republic. Having more than 30 years background in X-ray optics development for space applications (for use in astronomical X-ray telescopes onboard spacecrafts, before 1989 mostly for Soviet and East European INTERKOSMOS program), we focus nowadays on novel technologies and approaches, thin shell replicated mirrors, as well as studies of light-weight mirrors based on innovative materials such as ceramics. The collaboration includes teams from the Academy of Sciences, Universities, and industry. We will describe and discuss both the history of the development of Xray optics in the Czech Republic and the developed technologies and approaches (with focus on replication technology) as well as recent activities and developments including our participation on the ESA XEUS mirror technology development based on the Agreement between ESA and Czech Government.

Using a Learner-Centered Approach to Develop an Educational Technology Course

ERIC Educational Resources Information Center

Abdelmalak, Mariam; Trespalacios, Jesús

2013-01-01

The article explores the structure of a graduate educational technology course that used a learner-centered approach to prepare students to be independent responsible learners. Key features of this approach were the balance of power between the instructor and students, involving students in decision-making about their learning, sharing the…

SSWR Water Systems Project 3: Transformative Approaches and Technologies

EPA Science Inventory

This project aims to develop approaches and evaluate technologies that will help transform water systems towards a more sustainable future. Water systems challenged by issues such as shrinking resources, aging infrastructure, shifting demographics, and climate change need transf...

Recombinase polymerase amplification: Emergence as a critical molecular technology for rapid, low-resource diagnostics.

PubMed

James, Ameh; Macdonald, Joanne

2015-01-01

Isothermal molecular diagnostics are bridging the technology gap between traditional diagnostics and polymerase chain reaction-based methods. These new techniques enable timely and accurate testing, especially in settings where there is a lack of infrastructure to support polymerase chain reaction facilities. Despite this, there is a significant lack of uptake of these technologies in developing countries where they are highly needed. Among these novel isothermal technologies, recombinase polymerase amplification (RPA) holds particular potential for use in developing countries. This rapid nucleic acid amplification approach is fast, highly sensitive and specific, and amenable to countries with a high burden of infectious diseases. Implementation of RPA technology in developing countries is critically required to assess limitations and potentials of the diagnosis of infectious disease, and may help identify impediments that prevent adoption of new molecular technologies in low resource- and low skill settings. This review focuses on approaching diagnosis of infectious disease with RPA.

The Impact of Changing Policies about Technology on the Professional Development Needs of Early Years Educators in England

ERIC Educational Resources Information Center

Ingleby, Ewan

2015-01-01

This paper considers the implications of UK policy approaches to ICT (Information Communication Technology) in education by exploring the views of early years (0-8 years) educators about their ICT CPD (continuing professional development) needs. UK policy approaches to ICT may be visualised as a "house that Jack built." The policies are…

Capability Investment Strategy to Enable JPL Future Space Missions

NASA Technical Reports Server (NTRS)

Lincoln, William; Merida, Sofia; Adumitroaie, Virgil; Weisbin, Charles R.

2006-01-01

The Jet Propulsion Laboratory (JPL) formulates and conducts deep space missions for NASA (the National Aeronautics and Space Administration). The Chief Technologist of JPL has responsibility for strategic planning of the laboratory's advanced technology program to assure that the required technological capabilities to enable future missions are ready as needed. The responsibilities include development of a Strategic Plan (Antonsson, E., 2005). As part of the planning effort, a structured approach to technology prioritization, based upon the work of the START (Strategic Assessment of Risk and Technology) (Weisbin, C.R., 2004) team, was developed. The purpose of this paper is to describe this approach and present its current status relative to the JPL technology investment.

National hydrogen technology competitiveness analysis with an integrated fuzzy AHP and TOPSIS approaches: In case of hydrogen production and storage technologies

NASA Astrophysics Data System (ADS)

Lee, Seongkon; Mogi, Gento

2017-02-01

The demand of fossil fuels, including oil, gas, and coal has been increasing with the rapid development of developing countries such as China and India. U.S., Japan, EU, and Korea have been making efforts to transfer to low carbon and green growth economics for sustainable development. And they also have been measuring to cope with climate change and the depletion of conventional fuels. Advanced nations implemented strategic energy technology development plans to lead the future energy market. Strategic energy technology development is crucial alternative to address the energy issues. This paper analyze the relative competitiveness of hydrogen energy technologies in case of hydrogen production and storage technologies from 2006 to 2010. Hydrogen energy technology is environmentally clean technology comparing with the previous conventional energy technologies and will play a key role to solve the greenhouse gas effect. Leading nations have increasingly focused on hydrogen technology R&D. This research is carried out the relative competitiveness of hydrogen energy technologies employed by an integrated fuzzy analytic hierarchy process (Fuzzy AHP) and The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approaches. We make four criteria, accounting for technological status, R&D budget, R&D human resource, and hydrogen infra. This research can be used as fundamental data for implementing national hydrogen energy R&D planning for energy policy-makers.

The Potential of Directed Instruction to Teach Effectively Technology Usage

ERIC Educational Resources Information Center

Hosseini, Zahra

2016-01-01

Currently, teacher educational systems tend to develop their teachers' knowledge to effectively integrate technology in teaching. Consequently, numerous studies have attempted to describe strategies, models and approaches to develop teachers' knowledge for teaching with technology. However, most teachers are still following their traditional…

Technology and the hydra of terrorism?

DOE Office of Scientific and Technical Information (OSTI.GOV)

LePoire, D. J.; Glenn, J. C.; Environmental Assessment

2007-02-01

In the application of new technologies that address the terrorism problem, an objective is to ensure that the technology does not cause more problems than it solves. Potential new technologies, including convergences of genomics, robotics, information technology, and nanotechnology, might rapidly develop. As with any technological advance, each of these offers a mixture of benefits and risks. At first, a direct approach is reviewed by looking at how these technologies might deter the motive, means, and opportunity for terrorist activities. While there are many potential deterrence applications, other issues are identified that might cause unintended problems in the system. Somemore » of these problems include the possible contribution to terrorist motives by increasing stresses toward divisiveness in society, terrorist means through the development of dual-use technologies, or terrorist opportunities by further developing technological vulnerabilities. Next, a more systemic approach is taken by reviewing a wider range of issues, such as resource availability, management of science and technology, and general societal trends. The balance between technological change and social response is important in realizing benefits while mitigating unintended consequences such as harmful uses through terrorist actions. To explore issues concerning this balance, possible technological development scenarios are reviewed, including the possibility of accelerating or slowing technological development. Some recent recommendations are considered within this context. The need for a balance between technological and social response in this asymmetric situation suggests that the benefits of a rapid technological response against terrorism might not be as large as those observed during World War II.« less

Choose to Use: Scaffolding for Technology Learning Needs in a Project-Based Learning Environment

ERIC Educational Resources Information Center

Weimer, Peggy D.

2017-01-01

Project-based learning is one approach used by teachers to meet the challenge of developing more technologically proficient students. This approach, however, requires students to manage a large number of tasks including the mastery of technology. If a student's perception that their capability to perform a task falls below the task's difficulty,…

JiFUNzeni: A Blended Learning Approach for Sustainable Teachers' Professional Development

ERIC Educational Resources Information Center

Onguko, Brown Bully

2014-01-01

JiFUNzeni blended learning approach is a sustainable approach to provision of professional development (PD) for those in challenging educational contexts. JiFUNzeni approach emphasizes training regional experts to create blended learning content, working with appropriate technology while building content repositories. JiFUNzeni approach was…

An Ethnographically Informed Participatory Design of Primary Healthcare Information Technology in a Developing Country Setting.

PubMed

Shidende, Nima Herman; Igira, Faraja Teddy; Mörtberg, Christina Margaret

2017-01-01

Ethnography, with its emphasis on understanding activities where they occur, and its use of qualitative data gathering techniques rich in description, has a long tradition in Participatory Design (PD). Yet there are limited methodological insights in its application in developing countries. This paper proposes an ethnographically informed PD approach, which can be applied when designing Primary Healthcare Information Technology (PHIT). We use findings from a larger multidisciplinary project, Health Information Systems Project (HISP) to elaborate how ethnography can be used to facilitate participation of health practitioners in developing countries settings as well as indicating the importance of ethnographic approach to participatory Health Information Technology (HIT) designers. Furthermore, the paper discusses the pros and cons of using an ethnographic approach in designing HIT.

Structures and Materials Technologies for Extreme Environments Applied to Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Scotti, Stephen J.; Clay, Christopher; Rezin, Marc

2003-01-01

This paper provides an overview of the evolution of structures and materials technology approaches to survive the challenging extreme environments encountered by earth-to-orbit space transportation systems, with emphasis on more recent developments in the USA. The evolution of technology requirements and experience in the various approaches to meeting these requirements has significantly influenced the technology approaches. While previous goals were primarily performance driven, more recently dramatic improvements in costs/operations and in safety have been paramount goals. Technologies that focus on the cost/operations and safety goals in the area of hot structures and thermal protection systems for reusable launch vehicles are presented. Assessments of the potential ability of the various technologies to satisfy the technology requirements, and their current technology readiness status are also presented.

Design & Technology Teaching: A Journal of New Approaches, 1994-95.

ERIC Educational Resources Information Center

Design and Technology Teaching, 1995

1995-01-01

This document consists of the three issues of the journal "Design & Technology Teaching" for the 1994-95 publishing year. This journal focuses on developments in design and technology across all phases of education. It provides a forum for sharing and developing expertise in all the contributing areas of design and technology: art and design,…

Impact of Technology and Culture on Home Economics and Nutrition Science Education in Developing Countries

ERIC Educational Resources Information Center

Aburime, M. O.; Uhomoibhi, J. O.

2010-01-01

Purpose: The purpose of this paper is to examine and report on the impact of technology and culture on home economics and nutrition science education in developing countries with a focus on Nigeria. Design/methodology/approach: Globally and most especially in developing countries, the advent of information and communication technologies has meant…

Trends in the Development of Technology and Engineering Education in Emerging Economies

ERIC Educational Resources Information Center

Adegbuyi, P. A. O.; Uhomoibhi, J. O.

2008-01-01

Purpose: The purpose of this paper is to report on the nature of technology and engineering education provision in developing economies, focusing on Nigeria. Design/methodology/approach: The paper draws on recent developments in the shake up and implementation of new measures to call for quality technology and engineering education in the country,…

Impacts of Technological Changes in the Cyber Environment on Software/Systems Engineering Workforce Development

DTIC Science & Technology

2010-04-01

for decoupled parallel development Ref: Barry Boehm 12 Impacts of Technological Changes in the Cyber Environment on Software/Systems Engineering... Pressman , R.S., Software Engineering: A Practitioner’s Approach, 13 Impacts of Technological Changes in the Cyber Environment on Software/Systems

Marshall Space Flight Center ECLSS technology activities

NASA Technical Reports Server (NTRS)

Wieland, Paul

1990-01-01

Viewgraphs on Environmental Control and Life Support System (ECLSS) technology activities are presented. Topics covered include: analytical development; ECLSS modeling approach; example of water reclamation modeling needs; and hardware development and testing.

Professional Development in Technology at High Achieving Schools

ERIC Educational Resources Information Center

Ryan, Kevin D.

2017-01-01

This study analyzed educators' perception of professional development offered through schools in the area of technology implementation and tried to define its perceived effectiveness in meeting the professional development conceptual framework defined by Gardner, Baker, Vogt, and Hodel in "Four Approaches to Professional Development".…

Human genome project: revolutionizing biology through leveraging technology

NASA Astrophysics Data System (ADS)

Dahl, Carol A.; Strausberg, Robert L.

1996-04-01

The Human Genome Project (HGP) is an international project to develop genetic, physical, and sequence-based maps of the human genome. Since the inception of the HGP it has been clear that substantially improved technology would be required to meet the scientific goals, particularly in order to acquire the complete sequence of the human genome, and that these technologies coupled with the information forthcoming from the project would have a dramatic effect on the way biomedical research is performed in the future. In this paper, we discuss the state-of-the-art for genomic DNA sequencing, technological challenges that remain, and the potential technological paths that could yield substantially improved genomic sequencing technology. The impact of the technology developed from the HGP is broad-reaching and a discussion of other research and medical applications that are leveraging HGP-derived DNA analysis technologies is included. The multidisciplinary approach to the development of new technologies that has been successful for the HGP provides a paradigm for facilitating new genomic approaches toward understanding the biological role of functional elements and systems within the cell, including those encoded within genomic DNA and their molecular products.

The Development of Solar Sail Propulsion for NASA Science Missions to the Inner Solar System

NASA Technical Reports Server (NTRS)

Montgomery, Edward E, IV; Johnson, Charles Les

2004-01-01

This paper examines recent assessments of the technology challenges facing solar sails, identifies the systems and technologies needing development, and the approach employed by NASA's In-space Propulsion Program in NASA to achieve near term products that move this important technology from low technology readiness level (TRL) toward the goal of application to science missions in near earth space and beyond. The status of on-going efforts to design, build, and test ground demonstrators of alternate approaches to structures (inflatable versus rigid), membrane materials, optical shape sensing, and attitude control will be presented along with planned future investments.

Fission Surface Power Technology Development Status

NASA Technical Reports Server (NTRS)

Palac, Donald T.; Mason, Lee S.; Houts, Michael G.; Harlow, Scott

2010-01-01

Power is a critical consideration in planning exploration of the surfaces of the Moon, Mars, and beyond. Nuclear power is an important option, especially for locations in the solar system where sunlight is limited in availability or intensity. NASA is maintaining the option for fission surface power for the Moon and Mars by developing and demonstrating technology for an affordable fission surface power system. Because affordability drove the determination of the system concept that this technology will make possible, low development and recurring costs result, while required safety standards are maintained. However, an affordable approach to fission surface power also provides the benefits of simplicity, robustness, and conservatism in design. This paper will illuminate the multiplicity of benefits to an affordable approach to fission surface power, and will describe how the foundation for these benefits is being developed and demonstrated in the Exploration Technology Development Program s Fission Surface Power Project.

Space Solar Power Concepts: Demonstrations to Pilot Plants

NASA Technical Reports Server (NTRS)

Carrington, Connie K.; Feingold, Harvey; Howell, Joe T. (Technical Monitor)

2002-01-01

The availability of abundant, affordable power where needed is a key to the future exploration and development of space as well as future sources of clean terrestrial power. One innovative approach to providing such power is the use of wireless power transmission (WPT). There are at least two possible WPT methods that appear feasible; microwave and laser. Microwave concepts have been generated, analyzed and demonstrated. Technologies required to provide an end-to-end system have been identified and roadmaps generated to guide technology development requirements. Recently, laser W T approaches have gained an increased interest. These approaches appear to be very promising and will possibly solve some of the major challenges that exist with the microwave option. Therefore, emphasis is currently being placed on the laser WPT activity. This paper will discuss the technology requirements, technology roadmaps and technology flight experiments demonstrations required to lead toward a pilot plant demonstration. Concepts will be discussed along with the modeling techniques that are used in developing them. Feasibility will be addressed along with the technology needs, issues and capabilities for particular concepts. Flight experiments and demonstrations will be identified that will pave the road from demonstrations to pilot plants and beyond.

Technological Innovation and Developmental Strategies for Sustainable Management of Aquatic Resources in Developing Countries

NASA Astrophysics Data System (ADS)

Agboola, Julius Ibukun

2014-12-01

Sustainable use and allocation of aquatic resources including water resources require implementation of ecologically appropriate technologies, efficient and relevant to local needs. Despite the numerous international agreements and provisions on transfer of technology, this has not been successfully achieved in developing countries. While reviewing some challenges to technological innovations and developments (TID), this paper analyzes five TID strategic approaches centered on grassroots technology development and provision of localized capacity for sustainable aquatic resources management. Three case studies provide examples of successful implementation of these strategies. Success requires the provision of localized capacity to manage technology through knowledge empowerment in rural communities situated within a framework of clear national priorities for technology development.

Technological innovation and developmental strategies for sustainable management of aquatic resources in developing countries.

PubMed

Agboola, Julius Ibukun

2014-12-01

Sustainable use and allocation of aquatic resources including water resources require implementation of ecologically appropriate technologies, efficient and relevant to local needs. Despite the numerous international agreements and provisions on transfer of technology, this has not been successfully achieved in developing countries. While reviewing some challenges to technological innovations and developments (TID), this paper analyzes five TID strategic approaches centered on grassroots technology development and provision of localized capacity for sustainable aquatic resources management. Three case studies provide examples of successful implementation of these strategies. Success requires the provision of localized capacity to manage technology through knowledge empowerment in rural communities situated within a framework of clear national priorities for technology development.

Eye TVR: Eye Trauma and Visual Restoration Team

DTIC Science & Technology

2012-03-01

overall goal of this project is to develop a technology for non-invasive neuromodulation of retinal activity. Our approach is to measure the neuronal...technologies, including the millimeter wave source and the flexible multielectrode array, have been developed for non-invasive neuromodulation of retinal...activity. Further work is required to validate the feasibility of the proposed neuromodulation approach. (3) The strategy of joining a multisite

Industrial Competitiveness and Technological Advancement: Debate Over Government Policy

DTIC Science & Technology

2007-03-19

private - sector technological development. Legislative activity over the past two decades has created a policy for technology development, albeit an ad hoc one. Because of the lack of consensus on the scope and direction of a national policy, Congress has taken an incremental approach aimed at creating new mechanisms to facilitate technological advancement in particular areas and making changes and improvements as necessary. Congressional action has mandated specific technology development programs and obligations in federal agencies that did not initially support such

Applying systems engineering methodologies to the micro- and nanoscale realm

NASA Astrophysics Data System (ADS)

Garrison Darrin, M. Ann

2012-06-01

Micro scale and nano scale technology developments have the potential to revolutionize smart and small systems. The application of systems engineering methodologies that integrate standalone, small-scale technologies and interface them with macro technologies to build useful systems is critical to realizing the potential of these technologies. This paper covers the expanding knowledge base on systems engineering principles for micro and nano technology integration starting with a discussion of the drivers for applying a systems approach. Technology development on the micro and nano scale has transition from laboratory curiosity to the realization of products in the health, automotive, aerospace, communication, and numerous other arenas. This paper focuses on the maturity (or lack thereof) of the field of nanosystems which is emerging in a third generation having transitioned from completing active structures to creating systems. The emphasis of applying a systems approach focuses on successful technology development based on the lack of maturity of current nano scale systems. Therefore the discussion includes details relating to enabling roles such as product systems engineering and technology development. Classical roles such as acquisition systems engineering are not covered. The results are also targeted towards small-scale technology developers who need to take into account systems engineering processes such as requirements definition, verification, and validation interface management and risk management in the concept phase of technology development to maximize the likelihood of success, cost effective micro and nano technology to increase the capability of emerging deployed systems and long-term growth and profits.

Entropy and Gravity Concepts as New Methodological Indexes to Investigate Technological Convergence: Patent Network-Based Approach

PubMed Central

Cho, Yongrae; Kim, Minsung

2014-01-01

The volatility and uncertainty in the process of technological developments are growing faster than ever due to rapid technological innovations. Such phenomena result in integration among disparate technology fields. At this point, it is a critical research issue to understand the different roles and the propensity of each element technology for technological convergence. In particular, the network-based approach provides a holistic view in terms of technological linkage structures. Furthermore, the development of new indicators based on network visualization can reveal the dynamic patterns among disparate technologies in the process of technological convergence and provide insights for future technological developments. This research attempts to analyze and discover the patterns of the international patent classification codes of the United States Patent and Trademark Office's patent data in printed electronics, which is a representative technology in the technological convergence process. To this end, we apply the physical idea as a new methodological approach to interpret technological convergence. More specifically, the concepts of entropy and gravity are applied to measure the activities among patent citations and the binding forces among heterogeneous technologies during technological convergence. By applying the entropy and gravity indexes, we could distinguish the characteristic role of each technology in printed electronics. At the technological convergence stage, each technology exhibits idiosyncratic dynamics which tend to decrease technological differences and heterogeneity. Furthermore, through nonlinear regression analysis, we have found the decreasing patterns of disparity over a given total period in the evolution of technological convergence. This research has discovered the specific role of each element technology field and has consequently identified the co-evolutionary patterns of technological convergence. These new findings on the evolutionary patterns of technological convergence provide some implications for engineering and technology foresight research, as well as for corporate strategy and technology policy. PMID:24914959

Exploring Preschool Teachers' Technological Pedagogical Content Knowledge of Educational Games

ERIC Educational Resources Information Center

Hsu, Chung-Yuan; Liang, Jyh-Chong; Chai, Ching-Sing; Tsai, Chin-Chung

2013-01-01

Current technological pedagogical content knowledge (TPACK) studies are inclined to treat technology in a general manner, an approach which may not be able to provide adequate guidelines to improve teacher preparation and professional development when teaching with games. This study developed two new questionnaires, namely the Technological…

Educational Technology and Organizational Development: A Collaborative Approach to Organizational Change.

ERIC Educational Resources Information Center

Forbes, Raymond L., Jr.; Nickols, Frederick W.

The basic similarities between educational technology and organizational development provide a powerful rationale for collaboration. The two disciplines are essentially in the same business, that of systematically changing human behavior. System theory and the system model appear to supply the language and the technology through which such efforts…

On-line Technology Information System (OTIS): Solid Waste Management Technology Information Form (SWM TIF)

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Boulanger, Richard; Hogan, John A.; Rodriguez, Luis

2003-01-01

Contents include the following: What is OTIS? OTIS use. Proposed implementation method. Development history of the Solid Waste Management (SWM) Technology Information Form (TIF) and OTIS. Current development state of the SWM TIF and OTIS. Data collection approach. Information categories. Critiques/questions/feedback.

The Need for Governance by Experimentation: The Case of Biofuels.

PubMed

Asveld, Lotte

2016-06-01

The policies of the European Union concerning the development of biofuels can be termed a lock-in. Biofuels were initially hailed as a green, sustainability technology. However evidence to the contrary quickly emerged. The European Commission proposed to alter its policies to accommodate for these effects but met with fierce resistance from a considerable number of member states who have an economic interest in these first generation biofuels. In this paper I argue that such a lock-in might have been avoided if an experimental approach to governance had been adopted. Existing approaches such as anticipation and niche management either do not reduce uncertainty sufficiently or fail to explicitly address conflicts between values motivating political and economic support for new technologies. In this paper, I suggest to apply an experimental framework to the development of sustainable biobased technologies. Such an approach builds on insights from adaptive management and transition management in that it has the stimulation of learning effects at its core. I argue that these learning effects should occur on the actual impacts of new technologies, on the institutionalisation of new technologies and most specifically on the norms and values that underly policies supporting new technologies. This approach can be relevant for other emerging technologies.

Intelligent Tutoring Systems by and for the Developing World: A Review of Trends and Approaches for Educational Technology in a Global Context

ERIC Educational Resources Information Center

Nye, Benjamin D.

2015-01-01

As information and communication technology access expands in the developing world, learning technologies have the opportunity to play a growing role to enhance and supplement strained educational systems. Intelligent tutoring systems (ITS) offer strong learning gains, but are a class of technology traditionally designed for most-developed…

A Systems Approach to Technology Education.

ERIC Educational Resources Information Center

Hacker, Michael; Barden, Robert

1983-01-01

Provides a brief history of industrial arts curriculum development, a rationale for a technology-based study of industrial arts, and the use of a systems view in understanding and interpreting technology. (SK)

Capacity building for assessing new technologies: approaches to examining personalized medicine in practice

PubMed Central

Van Bebber, Stephanie L; Trosman, Julia R; Liang, Su-Ying; Wang, Grace; Marshall, Deborah A; Knight, Sara; Phillips, Kathryn A

2011-01-01

This article focuses on the overarching question: how can we use existing data to develop the capacity to improve the evidence base on personalized medicine technologies and particularly regarding their utilization and clinical utility? We focus on data from health payers who are key stakeholders in capacity building, as they need data to guide decisions and they develop data as part of operations. Broadly defined, health payers include insurance carriers, third party payers, health-plan sponsors and organized delivery systems. Data from health payers have not yet been widely used to assess personalized medicine. Now, with an increasing number of personalized technologies covered and reimbursed by health payers, and an increasing number of emerging technologies that will require policy decisions, there is a great opportunity to develop the evidence base using payer data and by engaging with these stakeholders. Here, we describe data that are available from, and are being developed by, health payers and assess how these data can be further developed to increase the capacity for future research, using three examples. The examples suggest that payer data can be used to examine clinical utility and approaches can be developed that simultaneously address the characteristics of personalized medicine, real world data and organizations. These examples can now help us to elucidate how to best examine clinical utility in actual practice and build evaluation approaches that can be applied to future technologies. PMID:21857867

Curriculum Development for Technology-Based Entrepreneurship Education: A Cross-Disciplinary and Cross-Cultural Approach

ERIC Educational Resources Information Center

Kazakeviciute, Agne; Urbone, Renata; Petraite, Monika

2016-01-01

University-based entrepreneurship education is facing a paradigm shift between the classical "business school" and the contemporary cross-disciplinary "technology venturing" approach, mainly advocated by engineering schools and other communities outside business schools. The conflict is between structured "business…

Strategic Technology Investment Analysis: An Integrated System Approach

NASA Technical Reports Server (NTRS)

Adumitroaie, V.; Weisbin, C. R.

2010-01-01

Complex technology investment decisions within NASA are increasingly difficult to make such that the end results are satisfying the technical objectives and all the organizational constraints. Due to a restricted science budget environment and numerous required technology developments, the investment decisions need to take into account not only the functional impact on the program goals, but also development uncertainties and cost variations along with maintaining a healthy workforce. This paper describes an approach for optimizing and qualifying technology investment portfolios from the perspective of an integrated system model. The methodology encompasses multi-attribute decision theory elements and sensitivity analysis. The evaluation of the degree of robustness of the recommended portfolio provides the decision-maker with an array of viable selection alternatives, which take into account input uncertainties and possibly satisfy nontechnical constraints. The methodology is presented in the context of assessing capability development portfolios for NASA technology programs.

Professional development of Russian HEIs' management and faculty in CDIO standards application

NASA Astrophysics Data System (ADS)

Chuchalin, Alexander; Malmqvist, Johan; Tayurskaya, Marina

2016-07-01

The paper presents the approach to complex training of managers and faculty staff for system modernisation of Russian engineering education. As a methodological basis of design and implementation of the faculty development programme, the CDIO (Conceive-Design-Implement-Operate) Approach was chosen due to compliance of its concept to the purposes and tasks of engineering education development in Russia. The authors describe the structure, the content and implementation technology of the programme designed by Tomsk Polytechnic University and Skolkovo Institute of Science and Technology with the assistance of Chalmers University of Technology and KTH Royal Institute of Technology and other members of the CDIO Initiative. The programme evaluation based on the questionnaire results showed that the programme content is relevant, has high practical value and high level of novelty for all categories of participants. Therefore, the CDIO approach was recommended for implementation to improve various elements of the engineering programme such as learning outcomes, content and structure, teaching, learning and assessment methods. Besides, the feedback results obtained through programme participants' survey contribute to identification of problems preventing development of engineering education in Russia and thus serve as milestones for further development of the programme.

Oxygen Sensing for Industrial Safety — Evolution and New Approaches

PubMed Central

Willett, Martin

2014-01-01

The requirement for the detection of oxygen in industrial safety applications has historically been met by electrochemical technologies based on the consumption of metal anodes. Products using this approach have been technically and commercially successful for more than three decades. However, a combination of new requirements is driving the development of alternative approaches offering fresh opportunities and challenges. This paper reviews some key aspects in the evolution of consumable anode products and highlights recent developments in alternative technologies aimed at meeting current and anticipated future needs in this important application. PMID:24681673

Oxygen sensing for industrial safety - evolution and new approaches.

PubMed

Willett, Martin

2014-03-27

The requirement for the detection of oxygen in industrial safety applications has historically been met by electrochemical technologies based on the consumption of metal anodes. Products using this approach have been technically and commercially successful for more than three decades. However, a combination of new requirements is driving the development of alternative approaches offering fresh opportunities and challenges. This paper reviews some key aspects in the evolution of consumable anode products and highlights recent developments in alternative technologies aimed at meeting current and anticipated future needs in this important application.

The Role of Motive Objects in Early Childhood Teacher Development Concerning Children's Digital Play and Play-Based Learning in Early Childhood Curricula

ERIC Educational Resources Information Center

Nuttall, Joce; Edwards, Susan; Mantilla, Ana; Grieshaber, Sue; Wood, Elizabeth

2015-01-01

Digital technologies are increasingly accepted as a viable aspect of early childhood curriculum. However, teacher uptake of digital technologies in early childhood education and their use with young children in play-based approaches to learning have not been strong. Traditional approaches to the problem of teacher uptake of digital technologies in…

The strategic approach to contraceptive introduction.

PubMed

Simmons, R; Hall, P; Díaz, J; Díaz, M; Fajans, P; Satia, J

1997-06-01

The introduction of new contraceptive technologies has great potential for expanding contraceptive choice, but in practice, benefits have not always materialized as new methods have been added to public-sector programs. In response to lessons from the past, the UNDP/UNFPA/WHO/World Bank Special Programme of Research, Development, and Research Training in Human Reproduction (HRP) has taken major steps to develop a new approach and to support governments interested in its implementation. After reviewing previous experience with contraceptive introduction, the article outlines the strategic approach and discusses lessons from eight countries. This new approach shifts attention from promotion of a particular technology to an emphasis on the method mix, the capacity to provide services with quality of care, reproductive choice, and users' perspectives and needs. It also suggests that technology choice should be undertaken through a participatory process that begins with an assessment of the need for contraceptive introduction and is followed by research and policy and program development. Initial results from Bolivia, Brazil, Burkina Faso, Chile, Myanmar, South Africa, Vietnam, and Zambia confirm the value of the new approach.

Design and Development of a Rapid Research, Design, and Development Platform for In-Situ Testing of Tools and Concepts for Trajectory-Based Operations

NASA Technical Reports Server (NTRS)

Underwood, Matthew C.

2017-01-01

To provide justification for equipping a fleet of aircraft with avionics capable of supporting trajectory-based operations, significant flight testing must be accomplished. However, equipping aircraft with these avionics and enabling technologies to communicate the clearances required for trajectory-based operations is cost-challenging using conventional avionics approaches. This paper describes an approach to minimize the costs and risks of flight testing these technologies in-situ, discusses the test-bed platform developed, and highlights results from a proof-of-concept flight test campaign that demonstrates the feasibility and efficiency of this approach.

Participatory design of healthcare technology with children.

PubMed

Sims, Tara

2018-02-12

Purpose There are many frameworks and methods for involving children in design research. Human-Computer Interaction provides rich methods for involving children when designing technologies. The paper aims to discuss these issues. Design/methodology/approach This paper examines various approaches to involving children in design, considering whether users view children as study objects or active participants. Findings The BRIDGE method is a sociocultural approach to product design that views children as active participants, enabling them to contribute to the design process as competent and resourceful partners. An example is provided, in which BRIDGE was successfully applied to developing upper limb prostheses with children. Originality/value Approaching design in this way can provide children with opportunities to develop social, academic and design skills and to develop autonomy.

A network approach for distinguishing ethical issues in research and development.

PubMed

Zwart, Sjoerd D; van de Poel, Ibo; van Mil, Harald; Brumsen, Michiel

2006-10-01

In this paper we report on our experiences with using network analysis to discern and analyse ethical issues in research into, and the development of, a new wastewater treatment technology. Using network analysis, we preliminarily interpreted some of our observations in a Group Decision Room (GDR) session where we invited important stakeholders to think about the risks of this new technology. We show how a network approach is useful for understanding the observations, and suggests some relevant ethical issues. We argue that a network approach is also useful for ethical analysis of issues in other fields of research and development. The abandoning of the overarching rationality assumption, which is central to network approaches, does not have to lead to ethical relativism.

SCOS 2: ESA's new generation of mission control system

NASA Technical Reports Server (NTRS)

Jones, M.; Head, N. C.; Keyte, K.; Howard, P.; Lynenskjold, S.

1994-01-01

New mission-control infrastructure is currently being developed by ESOC, which will constitute the second generation of the Spacecraft Control Operations system (SCOS 2). The financial, functional and strategic requirements lying behind the new development are explained. The SCOS 2 approach is described. The technological implications of these approaches is described: in particular it is explained how this leads to the use of object oriented techniques to provide the required 'building block' approach. The paper summarizes the way in which the financial, functional and strategic requirements have been met through this combination of solutions. Finally, the paper outlines the development process to date, noting how risk reduction was achieved in the approach to new technologies and summarizes the current status future plans.

Solar dynamic systems

NASA Technical Reports Server (NTRS)

Dustin, M. O.

1985-01-01

The development of the solar dynamic system is discussed. The benefits of the solar dynamic system over pv systems are enumerated. The history of the solar dynamic development is recounted. The purpose and approach of the advanced development are outlined. Critical concentrator technology and critical heat recover technology are examined.

Challenging Teachers' Pedagogic Practice and Assumptions about Social Media

ERIC Educational Resources Information Center

Cartner, Helen C.; Hallas, Julia L.

2017-01-01

This article describes an innovative approach to professional development designed to challenge teachers' pedagogic practice and assumptions about educational technologies such as social media. Developing effective technology-related professional development for teachers can be a challenge for institutions and facilitators who provide this…

New Challenging Approaches to Engineering Education: Enhancing University-Industry Co-Operation

ERIC Educational Resources Information Center

Korhonen-Yrjanheikki, Kati; Tukiainen, Taina; Takala, Minna

2007-01-01

Globalization, accelerated time-based competition, qualitative dynamics, rapid development of technology and especially Information and Communications Technology (ICT) developments challenge engineering education and capability development of each engineer. The success and the competitiveness of companies are increasingly based on their employees.…

Faculty Integration of Technology in Teacher Preparation: Outcomes of a Development Model

ERIC Educational Resources Information Center

Judge, Sharon; O'Bannon, Blanche

2008-01-01

This article reports on a faculty development model that uses a variety of approaches and strategies to help faculty restructure their curricula and effectively model technology integration for their students. A multifaceted model, funded in part by the "Preparing Tomorrow's Teachers to Use Technology" (PT3) initiative, was implemented…

Designing and Implementing an Integrated Technological Pedagogical Science Knowledge Framework for Science Teachers Professional Development

ERIC Educational Resources Information Center

Jimoyiannis, Athanassios

2010-01-01

This paper reports on the design and the implementation of the Technological Pedagogical Science Knowledge (TPASK), a new model for science teachers professional development built on an integrated framework determined by the Technological Pedagogical Content Knowledge (TPACK) model and the authentic learning approach. The TPASK curriculum…

Improving Technology Acceptance Modeling for Disadvantaged Communities Using a Systems Engineering Approach

ERIC Educational Resources Information Center

Fletcher, Jordan L.

2013-01-01

Developing nations are poised to spend billions on information and communication technology (ICT) innovation in 2020. A study of the historical adoption of ICT in developing nations has indicated that their adoption patterns do not follow typical technology innovation adoption models. This study addressed the weaknesses found in existing…

Developing Pre-Service Teachers' Capacity in Teaching Science with Technology through Microteaching Lesson Study Approach

ERIC Educational Resources Information Center

Zhou, George; Xu, Judy; Martinovic, Dragana

2017-01-01

In order to effectively use technology in teaching, teacher candidates need to develop technology related pedagogical content knowledge through being engaged in a process of discussion, modeling, practice, and reflection. Based on the examination of teacher candidates' lesson plan assignments, observations of their microteaching performance, and…

Embedded Multiprocessor Technology for VHSIC Insertion

NASA Technical Reports Server (NTRS)

Hayes, Paul J.

1990-01-01

Viewgraphs on embedded multiprocessor technology for VHSIC insertion are presented. The objective was to develop multiprocessor system technology providing user-selectable fault tolerance, increased throughput, and ease of application representation for concurrent operation. The approach was to develop graph management mapping theory for proper performance, model multiprocessor performance, and demonstrate performance in selected hardware systems.

A Theoretical Model of Children's Storytelling Using Physically-Oriented Technologies (SPOT)

ERIC Educational Resources Information Center

Guha, Mona Leigh; Druin, Allison; Montemayor, Jaime; Chipman, Gene; Farber, Allison

2007-01-01

This paper develops a model of children's storytelling using Physically-Oriented Technology (SPOT). The SPOT model draws upon literature regarding current physical storytelling technologies and was developed using a grounded theory approach to qualitative research. This empirical work focused on the experiences of 18 children, ages 5-6, who worked…

Who should pay for biomedical-engineering technology development?

NASA Astrophysics Data System (ADS)

Varnado, Samuel G.

1994-12-01

It is an enigma that the introduction of technology has led to improvements in productivity in practically every area of endeavor except the field of medicine. This paper asserts that properly applied technology, based on a systems engineering approach, can help reduce the cost while maintaining the quality of health care delivery. Achieving this goal will require more cooperation and coordination at the Federal level to insure that a focused systems approach is used in applying and developing technology that will lead to cost reduction. It is further asserted that much of the technology that could help reduce costs resides in the DoD and the DOE and has not historically been of prime interest to the NIH. Several dual use applications are presented that show how defense related technology can benefit the field of medicine.

Identifying Critical Issues and Problems in Technology Education Using a Modified-Delphi Technique.

ERIC Educational Resources Information Center

Wicklein, Robert C.

1993-01-01

Critical issues for technology education (TE) identified by a 25-member Delphi panel were identification of the knowledge base, curriculum development approaches, interdisciplinary approaches, and teacher education reform. Problems identified included inadequate marketing/public relations, teacher shortage, lack of content consensus, and…

Demarcating Advanced Learning Approaches from Methodological and Technological Perspectives

ERIC Educational Resources Information Center

Horvath, Imre; Peck, David; Verlinden, Jouke

2009-01-01

In the field of design and engineering education, the fast and expansive evolution of information and communication technologies is steadily converting traditional learning approaches into more advanced ones. Facilitated by Broadband (high bandwidth) personal computers, distance learning has developed into web-hosted electronic learning. The…

Concept-Guided Development of Technology in "Traditional" and "Innovative" Schools: Quantitative and Qualitative Differences in Technology Integration

ERIC Educational Resources Information Center

de Koster, Sandra; Volman, Monique; Kuiper, Els

2017-01-01

The integration of technology into the classroom remains a challenge for those involved. A concept-guided approach to the development of technology has been suggested as a way of meeting this challenge. This multiple case study was performed in the context of a project in which five elementary schools in The Netherlands with a school concept that…

Tracing the Construction of Mathematical Activity with an Advanced Graphing Calculator to Understand the Roles of Technology Developers, Teachers and Students

ERIC Educational Resources Information Center

Hillman, Thomas

2014-01-01

This article examines mathematical activity with digital technology by tracing it from its development through its use in classrooms. Drawing on material-semiotic approaches from the field of Science and Technology Studies, it examines the visions of mathematical activity that developers had for an advanced graphing calculator. It then follows the…

ARMD Strategic Thrust 6: Assured Autonomy for Aviation Transformation

NASA Technical Reports Server (NTRS)

Ballin, Mark; Holbrook, Jon; Sharma, Shivanjli

2016-01-01

In collaboration with the external community and other government agencies, NASA will develop enabling technologies, standards, and design guidelines to support cost-effective applications of automation and limited autonomy for individual components of aviation systems. NASA will also provide foundational knowledge and methods to support the next epoch. Research will address issues of verification and validation, operational evaluation, national policy, and societal cost-benefit. Two research and development approaches to aviation autonomy will advance in parallel. The Increasing Autonomy (IA) approach will seek to advance knowledge and technology through incremental increases in machine-based support of existing human-centered tasks, leading to long-term reallocation of functions between humans and machines. The Autonomy as a New Technology (ANT) approach seeks advances by developing technology to achieve goals that are not currently possible using human-centered concepts of operation. IA applications are mission-enhancing, and their selection will be based on benefits achievable relative to existing operations. ANT applications are mission-enabling, and their value will be assessed based on societal benefit resulting from a new capability. The expected demand for small autonomous unmanned aircraft systems (UAS) provides an opportunity for development of ANT applications. Supervisory autonomy may be implemented as an expansion of the number of functions or systems that may be controlled by an individual human operator. Convergent technology approaches, such as the use of electronic flight bags and existing network servers, will be leveraged to the maximum extent possible.

The role of technology in reducing health care costs. Final project report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sill, A.E.; Warren, S.; Dillinger, J.D.

1997-08-01

Sandia National Laboratories applied a systems approach to identifying innovative biomedical technologies with the potential to reduce U.S. health care delivery costs while maintaining care quality. This study was conducted by implementing both top-down and bottom-up strategies. The top-down approach used prosperity gaming methodology to identify future health care delivery needs. This effort provided roadmaps for the development and integration of technology to meet perceived care delivery requirements. The bottom-up approach identified and ranked interventional therapies employed in existing care delivery systems for a host of health-related conditions. Economic analysis formed the basis for development of care pathway interaction modelsmore » for two of the most pervasive, chronic disease/disability conditions: coronary artery disease (CAD) and benign prostatic hypertrophy (BPH). Societal cost-benefit relationships based on these analyses were used to evaluate the effect of emerging technology in these treatment areas. 17 figs., 48 tabs.« less

Continuing Evolution of Mars Sample Return

NASA Technical Reports Server (NTRS)

Mattingly, Richard; Matousek, Steve; Jordan, Frank

2004-01-01

This paper addresses the continued evolution of the Groundbreaking MSR concept over the last year. One of the tenets of the low-cost approach is to use substantial heritage from an earlier mission, Mars Science Laboratory (MSL). Recently, the MSL project developed and switched to a revolutionary landing approach, coined 'sky-crane' where the MSL, which is a rover, is lowered gently to the Martian surface from a hovering vehicle. MSR has adopted this approach, again continuing to capitalize on the heritage for a significant portion of the new lander. In parallel, a MSR Technology Board was formed to reexamine MSR technology needs and participate in a continuing refinement of architectural trades. While the focused technology program continues to be definitized through the remainder of this year, the current assessment of what technology development is required, is discussed in this paper. In addition, the results of new trade studies and considerations will be discussed.

Gender-Based Motivational Differences in Technology Education

ERIC Educational Resources Information Center

Virtanen, Sonja; Räikkönen, Eija; Ikonen, Pasi

2015-01-01

Because of a deeply gendered history of craft education in Finland, technology education has a strong gender-related dependence. In order to motivate girls into pursuing technological studies and to enable them to see their own potential in technology, gender sensitive approaches should be developed in technology education. This study explores…

A Future-Oriented, Globally Based Curriculum Model for Industrial Technology.

ERIC Educational Resources Information Center

Hacker, Michael

1982-01-01

Presents a future-oriented curriculum approach for industrial technology programs. Major global issues provide the basic structure for curriculum development. These issues include energy management, resource management, technological advancement, and international relations. Rationales for industrial technology are discussed and a curriculum…

Technology Project Learning versus Lab Experimentation

ERIC Educational Resources Information Center

Waks, S.; Sabag, N.

2004-01-01

The Project-Based Learning (PBL) approach enables the student to construct knowledge in his/her own way. Piaget, the founder of constructivism, saw the development of intelligence as a process involving the relationship between brain maturity and individual experience. The technology PBL (TPBL) approach confronts the student with a personal…

Learning through Creating Robotic Models of Biological Systems

ERIC Educational Resources Information Center

Cuperman, Dan; Verner, Igor M.

2013-01-01

This paper considers an approach to studying issues in technology and science, which integrates design and inquiry activities towards creating and exploring technological models of scientific phenomena. We implemented this approach in a context where the learner inquires into a biological phenomenon and develops its representation in the form of a…

Multimethod-Multisource Approach for Assessing High-Technology Training Systems.

ERIC Educational Resources Information Center

Shlechter, Theodore M.; And Others

This investigation examined the value of using a multimethod-multisource approach to assess high-technology training systems. The research strategy was utilized to provide empirical information on the instructional effectiveness of the Reserve Component Virtual Training Program (RCVTP), which was developed to improve the training of Army National…

75 FR 5291 - Office of Special Education and Rehabilitative Services; Overview Information; Technology and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-02

... two phases: (1) Development and (2) research on effectiveness. Abstracts of projects funded under... approaches. Phase 2 projects must subject technology-based approaches to rigorous field-based research to... disabilities; (2) Present a justification, based on scientifically rigorous research or theory, that supports...

Technology Underutilized: Principal's Role in Creating a Culture of High-Level Uses

ERIC Educational Resources Information Center

Foley, Darlene

2017-01-01

Teachers need to maximize technology to support student learning by drawing upon varying pedagogical orientations; however, teacher-centered, highly structured approaches that foster low-level thinking is more prevalent. Although highly structured approaches help develop students' foundational skills and content knowledge, student-centered,…

The General Atomics low speed urban Maglev technology development program

DOT National Transportation Integrated Search

2003-01-01

The overall objective of this program is to develop magnetic levitation technology that is a cost effective, reliable, : and environmentally friendly option for urban mass transportation in the United States. Maglev is a revolutionary : approach in w...

A Historical Perspective on Digital Hearing Aids: How Digital Technology Has Changed Modern Hearing Aids

PubMed Central

Levitt, Harry

2007-01-01

This article provides the author's perspective on the development of digital hearing aids and how digital signal processing approaches have led to changes in hearing aid design. Major landmarks in the evolution of digital technology are identified, and their impact on the development of digital hearing aids is discussed. Differences between analog and digital approaches to signal processing in hearing aids are identified. PMID:17301334

ATDRS payload technology R & D

NASA Technical Reports Server (NTRS)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

1990-01-01

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple-Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

ATDRS payload technology R & D

NASA Astrophysics Data System (ADS)

Anzic, G.; Connolly, D. J.; Fujikawa, G.; Andro, M.; Kunath, R. R.; Sharp, G. R.

Four technology development tasks were chosen to reduce (or at least better understand) the technology risks associated with proposed approaches to Advanced Tracking and Data Relay Satellite (ATDRS). The four tasks relate to a Tri-Band Antenna feed system, a Digital Beamforming System for the S Band Multiple-Access System (SMA), an SMA Phased Array Antenna, and a Configuration Thermal/Mechanical Analysis task. The objective, approach, and status of each are discussed.

"One hundred percent efficiency": Technology and the pursuit of scientific literacy

NASA Astrophysics Data System (ADS)

King, Kenneth Paul

This dissertation examined the role of technology in science education during the twentieth century. A historical approach was taken to examine teacher practices in the use of technology. The three technologies considered in this study were the motion picture, the television, and the computer. As an organizing principle, historical definitions of "scientific literacy" were used to examine the goals of using technology within science education. The evolution of the concept of science literacy is traced from the early part of the twentieth century to the late 1990s. Documentation examined revealed the "best practices" associated with the use of technology. The use of the motion picture was traced from the silent film through film loops, videotape, videodisc and the advent of the digital video disc, and the means by which teachers used this technology were considered. The instructional use of television was examined from several different approaches: commercial broadcasts, educational and instructional programming, closed circuit approaches and the use of cable and satellite programming. The manner in which these approaches were used to achieve goals of scientific literacy was considered. The use of the computer was examined in terms of the purpose of the software involved. Teaching practice to achieve scientific literacy, using computers as a means of accessing information, as an analytical tool, as a creativity tool, and as a means of communication were addressed. In each of these technologies, similar implementation trends were present within each one. The literature supporting the use of the technology described first the focus on the hardware, followed by the development of appropriate pedagogy, and then by the proliferation of software supporting the use of the technology. Suggestions for additional study were offered as well as speculation as to future practices with technology in science teaching. Investigations using expectation-value theory suggest particular promise with regard to staff development needs among teachers using technology. The convergence of the various technologies into a single entity represents one likely scenario for the use of technology within science teaching. Further developments with telecommunications may provide simple and direct delivery systems for national and/or state curricula.

Transformational System Concepts and Technologies for Our Future in Space

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Mankins, John C.

2004-01-01

Continued constrained budgets and growing national and international interests in the commercialization and development of space requires NASA to be constantly vigilant, to be creative, and to seize every opportunity for assuring the maximum return on space infrastructure investments. Accordingly, efforts are underway to forge new and innovative approaches to transform our space systems in the future to ultimately achieve two or three or five times as much with the same resources. This bold undertaking can be achieved only through extensive cooperative efforts throughout the aerospace community and truly effective planning to pursue advanced space system design concepts and high-risk/high-leverage research and technology. Definitive implementation strategies and roadmaps containing new methodologies and revolutionary approaches must be developed to economically accommodate the continued exploration and development of space. Transformation can be realized through modular design and stepping stone development. This approach involves sustainable budget levels and multi-purpose systems development of supporting capabilities that lead to a diverse amy of sustainable future space activities. Transformational design and development requires revolutionary advances by using modular designs and a planned, stepping stone development process. A modular approach to space systems potentially offers many improvements over traditional one-of-a-kind space systems comprised of different subsystem element with little standardization in interfaces or functionality. Modular systems must be more flexible, scaleable, reconfigurable, and evolvable. Costs can be reduced through learning curve effects and economies of scale, and by enabling servicing and repair that would not otherwise be feasible. This paper briefly discusses achieving a promising approach to transforming space systems planning and evolution into a meaningful stepping stone design, development, and implementation process. The success of this well planned and orchestrated approach holds great promise for achieving innovation and revolutionary technology development for supporting future exploration and development of space.

An Introduction to Intelligent Processing Programs Developed by the Air Force Manufacturing Technology Directorate

NASA Technical Reports Server (NTRS)

Sampson, Paul G.; Sny, Linda C.

1992-01-01

The Air Force has numerous on-going manufacturing and integration development programs (machine tools, composites, metals, assembly, and electronics) which are instrumental in improving productivity in the aerospace industry, but more importantly, have identified strategies and technologies required for the integration of advanced processing equipment. An introduction to four current Air Force Manufacturing Technology Directorate (ManTech) manufacturing areas is provided. Research is being carried out in the following areas: (1) machining initiatives for aerospace subcontractors which provide for advanced technology and innovative manufacturing strategies to increase the capabilities of small shops; (2) innovative approaches to advance machine tool products and manufacturing processes; (3) innovative approaches to advance sensors for process control in machine tools; and (4) efforts currently underway to develop, with the support of industry, the Next Generation Workstation/Machine Controller (Low-End Controller Task).

Technology assessment of portable energy RDT and P, phase 1

NASA Technical Reports Server (NTRS)

Spraul, J. R. (Compiler)

1975-01-01

A technological assessment of portable energy research, development, technology, and production was undertaken to assess the technical, economic, environmental, and sociopolitical issues associated with portable energy options. Those courses of action are discussed which would impact aviation and air transportation research and technology. Technology assessment workshops were held to develop problem statements. The eighteen portable energy problem statements are discussed in detail along with each program's objective, approach, task description, and estimates of time and costs.

Jordanian Pre-Service Teachers' and Technology Integration: A Human Resource Development Approach

ERIC Educational Resources Information Center

Al-Ruz, Jamal Abu; Khasawneh, Samer

2011-01-01

The purpose of this study was to test a model in which technology integration of pre-service teachers was predicted by a number of university-based and school-based factors. Initially, factors affecting technology integration were identified, and a research-based path model was developed to explain causal relationships between these factors. The…

Understanding the Technological, Pedagogical, and Mathematical Issues That Emerge as Secondary Mathematics Teachers Design Lessons That Integrate Technology

ERIC Educational Resources Information Center

Gonzalez, Marggie Denise

2016-01-01

This multiple case study examines four groups of secondary mathematics teachers engaged in a Lesson Study approach to professional development where they planned and taught lessons that integrate technology. Informed by current literature, a framework was developed to focus on the dimensions of teacher's knowledge to teach mathematics with…

The Need for Mobile Application Development in IS Curricula: An Innovation and Disruptive Technologies Perspective

ERIC Educational Resources Information Center

Babb, Jeffry S., Jr.; Abdullat, Amjad

2012-01-01

Disruptive technologies, such as mobile applications development, will always present a dilemma for Information Systems educators as dominant paradigms in our environment will tend to favor the existing sustaining technologies that we have become known for in our discipline. In light of this friction, we share our approach in investigating and…

Telescope technology for space-borne submillimeter astronomy

NASA Technical Reports Server (NTRS)

Lehman, David H.; Helou, George

1990-01-01

The Precision Segmented Reflector (PSR) project which is developing telescope technology needed for future spaceborne submillimeter astronomy missions is described. Four major technical areas are under development. Lighweight composite mirrors and associated materials, precision structures and segmented reflector figure sensing and control are discussed. The objectives of the PSR project, approaches, and project technology status, are reported.

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

ERIC Educational Resources Information Center

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

A Fast, Affordable, Science and Technology SATellite (FASTSAT) and the Small Satellite Market Development Environment

NASA Technical Reports Server (NTRS)

Boudreaux, Mark; Montgomery, Edward; Cacas, Joseph

2008-01-01

The National Aeronautics and Space Administr ation at Marshall Space Flight Center and the National Space Science and Technology Center in Huntsville Alabama USA, are jointly developing a new class of science and technology mission small satellites. The Fast, Affordable, Science and Technology SATell ite (FASTSAT) was designed and developed using a new collaborative and best practices approach. The FASTSAT development, along with the new class of low cost vehicles currently being developed, would allow performance of 30 kg payload mass missions for a cost of less than 10 million US dollars.

Annual Summary. Training and Technology Experimentation, Demonstration, and Utilization Program Activities (January 1-December 31, 1971).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Directed primarily toward increasing utilization of industrial resources for training and development of disadvantaged persons, Training and Technology (TAT) activities for 1971 included: (1) development and implementation of experimental approaches to program development and operation, (2) technical support for university-conducted related…

I feel disconnected: learning technologies in resident education.

PubMed

Armstrong, April D; Jarvis-Selinger, Sandra

2013-01-01

With the rapid development of technology in medical education, orthopaedic educators are recognizing that the way residents learn and access information is profoundly changing. Residency programs are faced with the challenging problem that current educational methods are not designed to take full advantage of the information explosion and rapid technologic changes. This disconnection is often seen in the potentially separate approaches to education preferred by residents and orthopaedic educators. Becoming connected with residents requires understanding the possible learning technologies available and the learners' abilities, needs, and expectations. It is often assumed that approaches to strategic lifelong learning are developed by residents during their training; however, without the incorporation of technology into the learning environment, residents will not be taught the digital literacy and information management strategies that will be needed in the future. To improve learning, it is important to highlight and discuss current technologic trends in education, the possible technologic disconnection between educators and learners, the types of learning technologies available, and the potential opportunities for getting connected.

KSC Education Technology Research and Development Plan

NASA Technical Reports Server (NTRS)

Odell, Michael R. L.

2003-01-01

Educational technology is facilitating new approaches to teaching and learning science, technology, engineering, and mathematics (STEM) education. Cognitive research is beginning to inform educators about how students learn providing a basis for design of more effective learning environments incorporating technology. At the same time, access to computers, the Internet and other technology tools are becoming common features in K-20 classrooms. Encouraged by these developments, STEM educators are transforming traditional STEM education into active learning environments that hold the promise of enhancing learning. This document illustrates the use of technology in STEM education today, identifies possible areas of development, links this development to the NASA Strategic Plan, and makes recommendations for the Kennedy Space Center (KSC) Education Office for consideration in the research, development, and design of new educational technologies and applications.

Composite Development and Applications for RLV Tankage

NASA Technical Reports Server (NTRS)

Wright, Richard J.; Achary, David C.; McBain, Michael C.

2003-01-01

The development of polymer composite cryogenic tanks is a critical step in creating the next generation of launch vehicles. Future launch vehicles need to minimize the gross liftoff weight (GLOW), which is possible due to the 28%-41% reduction in weight that composite materials can provide over current aluminum technology. The development of composite cryogenic tanks, feedlines, and unpressurized structures are key enabling technologies for performance and cost enhancements for Reusable Launch Vehicles (RLVs). The technology development of composite tanks has provided direct and applicable data for feedlines, unpressurized structures, material compatibility, and cryogenic fluid containment for highly loaded complex structures and interfaces. All three types of structure have similar material systems, processing parameters, scaling issues, analysis methodologies, NDE development, damage tolerance, and repair scenarios. Composite cryogenic tankage is the most complex of the 3 areas and provides the largest breakthrough in technology. A building block approach has been employed to bring this family of difficult technologies to maturity. This approach has built up composite materials, processes, design, analysis and test methods technology through a series of composite test programs beginning with the NASP program to meet aggressive performance goals for reusable launch vehicles. In this paper, the development and application of advanced composites for RLV use is described.

A Framework for Developing Expertise in Engaging the Technological World.

ERIC Educational Resources Information Center

Puk, Tom

1996-01-01

Technology education needs a pluralistic approach that begins with a perspective of what a technology is and follows a sequence of levels of engagement with it: functionality, intuitive excellence, conceptual understanding, and self-transcendence. (SK)

Preparing Pre-Service Teachers to Integrate Technology into K-12 Instruction: Evaluation of a Technology-Infused Approach

ERIC Educational Resources Information Center

Admiraal, Wilfried; van Vugt, Felix; Kranenburg, Frans; Koster, Bob; Smit, Ben; Weijers, Sanne; Lockhorst, Ditte

2017-01-01

The quality of how technology is addressed in teacher education programmes is conditional for how student teachers apply technology in secondary schools after their graduation. Two technology-infused courses of one teacher education programme were evaluated. In line with studies on the development of pre-service teachers' technological,…

The Coevolution of Society and Multimedia Technology: Issues in Predicting the Future Innovation and Use of a Ubiquitous Technology.

ERIC Educational Resources Information Center

Stewart, James; Williams, Robin

1998-01-01

Criticizes "technologically deterministic" approaches, which seek to extrapolate social change from technological potential. Shows how a three-layer model of component, system, and application technologies can be used to integrate findings from the use and development of technology in specific sectors. Examines three cases of…

Alternate Approaches to Exploration: The Single Crew Module Concept

NASA Technical Reports Server (NTRS)

Chambliss, Joe

2011-01-01

The Cx Program envisioned exploration of the moon and mars using an extrapolation of the Apollo approach. If new technology development initiatives are successful, they will provide capabilities that can enable alternate approaches. This presentation will provide a brief overview of the Cx approaches for lunar and Mars missions and some of the alternatives that were considered. Then an alternative approach referred to as a Single Crew Module approach is described. The SCM concept employs new technologies in a way that could reduce exploration cost and possibly schedule. Options to the approaches will be presented and discussed.

Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donley, Tim

2014-12-31

Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the “replacement market” that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what hasmore » already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooper’s CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.« less

Technical Transformation of Biodefense Vaccines

PubMed Central

Lu, Shan; Wang, Shixia

2013-01-01

Biodefense vaccines are developed against a diverse group of pathogens. Vaccines were developed for some of these pathogens a long time ago but they are facing new challenges to move beyond the old manufacturing technologies. New vaccines to be developed against other pathogens have to determine whether to follow traditional vaccination strategies or to seek new approaches. Advances in basic immunology and recombinant DNA technology have fundamentally transformed the process of formulating a vaccine concept, optimizing protective antigens, and selecting the most effective vaccine delivery approach for candidate biodefense vaccines. PMID:19837293

The GRADE approach for assessing new technologies as applied to apheresis devices in ulcerative colitis

PubMed Central

2010-01-01

Background In the last few years, a new non-pharmacological treatment, termed apheresis, has been developed to lessen the burden of ulcerative colitis (UC). Several methods can be used to establish treatment recommendations, but over the last decade an informal collaboration group of guideline developers, methodologists, and clinicians has developed a more sensible and transparent approach known as the Grading of Recommendations, Assessment, Development and Evaluation (GRADE). GRADE has mainly been used in clinical practice guidelines and systematic reviews. The aim of the present study is to describe the use of this approach in the development of recommendations for a new health technology, and to analyse the strengths, weaknesses, opportunities, and threats found when doing so. Methods A systematic review of the use of apheresis for UC treatment was performed in June 2004 and updated in May 2008. Two related clinical questions were selected, the outcomes of interest defined, and the quality of the evidence assessed. Finally, the overall quality of each question was taken into account to formulate recommendations following the GRADE approach. To evaluate this experience, a SWOT (strengths, weaknesses, opportunities and threats) analysis was performed to enable a comparison with our previous experience with the SIGN (Scottish Intercollegiate Guidelines Network) method. Results Application of the GRADE approach allowed recommendations to be formulated and the method to be clarified and made more explicit and transparent. Two weak recommendations were proposed to answer to the formulated questions. Some challenges, such as the limited number of studies found for the new technology and the difficulties encountered when searching for the results for the selected outcomes, none of which are specific to GRADE, were identified. GRADE was considered to be a more time-consuming method, although it has the advantage of taking into account patient values when defining and grading the relevant outcomes, thereby avoiding any influence from literature precedents, which could be considered to be a strength of this method. Conclusions The GRADE approach could be appropriate for making the recommendation development process for Health Technology Assessment (HTA) reports more explicit, especially with regard to new technologies. PMID:20553616

Technology transfer to a developing nation, Korea

NASA Technical Reports Server (NTRS)

Stone, C. A.; Uccetta, S. J.

1973-01-01

An experimental project is reported which was undertaken. to determine if selected types of technology developed for the aerospace program during the past decade are relevant to specific industrial problems of a developing nation and to test whether a structured program could facilitate the transfer of relevant technologies. The Korea Institute of Science and Technology and the IIT Research Institute were selected as the active transfer agents to participate in the program. The pilot project was based upon the approach to the transfer of domestic technology developed by the NASA Technology Utilization Division and utilized the extensive data and technical resources available through the Space Agency and its contractors. This pilot project has helped to clarify some aspects of the international technology transfer process and to upgrade Korean technological capabilities.

Definition of technology development missions for early Space Station satellite servicing. Volume 2: Technical

NASA Technical Reports Server (NTRS)

Cable, D. A.; Diewald, C. A.; Hills, T. C.; Parmentier, T. J.; Spencer, R. A.; Stone, G. E.

1984-01-01

Volume 2 contains the Technical Report of the approach and results of the Phase 2 study. The phase 2 servicing study was initiated in June 1983, and is being reported in this document. The scope of the contract was to: (1) define in detail five selected technology development missions (TDM); (2) conduct a design requirement analysis to refine definitions of satellite servicing requirements at the space station; and (3) develop a technology plan that would identify and schedule prerequisite precursor technology development, associated. STS flight experiments and space station experiments needed to provide onorbit validation of the evolving technology.

A Novel Approach For Ankle Foot Orthosis Developed By Three Dimensional Technologies

NASA Astrophysics Data System (ADS)

Belokar, R. M.; Banga, H. K.; Kumar, R.

2017-12-01

This study presents a novel approach for testing mechanical properties of medical orthosis developed by three dimensional (3D) technologies. A hand-held type 3D laser scanner is used for generating 3D mesh geometry directly from patient’s limb. Subsequently 3D printable orthotic design is produced from crude input model by means of Computer Aided Design (CAD) software. Fused Deposition Modelling (FDM) method in Additive Manufacturing (AM) technologies is used to fabricate the 3D printable Ankle Foot Orthosis (AFO) prototype in order to test the mechanical properties on printout. According to test results, printed Acrylonitrile Butadiene Styrene (ABS) AFO prototype has sufficient elasticity modulus and durability for patient-specific medical device manufactured by the 3D technologies.

When technology, science and culture meet: insights from ancient Chinese technology

NASA Astrophysics Data System (ADS)

Lee, Yeung Chung

2017-10-01

This paper draws together two important agendas in science education. The first is making science education more inclusive such that students from non-Western or indigenous cultures can benefit from culturally relevant curricula. The second is integrating technology into the curriculum under the umbrella of Science-Technology-Society (STS) education to embrace the social aspects of science, with technology serving as a bridge. The advancement of the first agenda is hindered by the pursuance by both Western and non-Western societies of narrow cultural and practical goals without considering the development of science and technology from a cross-cultural perspective. The second agenda is limited by the misconception that technology is applied science, leading to the exclusion from STS discussions of pre-science or indigenous technologies developed by non-Western cultures. Through selected case studies of the evolution of Chinese traditional technologies and their interaction with science, this paper offers a perspective from the Far East, and argues for situating culturally responsive science education in broader historical and cross-cultural contexts to acknowledge the multi-cultural contributions to science and technology. A form of cross-cultural STS education is advanced, encompassing the cultural basis of technological developments, technology diffusion, interactions of traditional technology with science, and the potential development of traditional or indigenous technologies. This approach provides a bridge between the existing universal science education paradigm promoted in the West and the different forms of multi-cultural education advocated by indigenous science educators. To translate theory into practice, a conceptual framework is proposed in which the essential transdisciplinary knowledge base, curricular goals, and pedagogical approaches are embedded.

Introducing technology education to young children: A design, make and appraise approach

NASA Astrophysics Data System (ADS)

Fleer, Marilyn

1992-12-01

The National Statement on Technology Education will soon be released in Australia. The statement advocates a design, make and appraise approach to technology education. The document includes Year One children and provides exemplars of curriculum activities for early childhood children. Although much curriculum development in technology education for primary and early childhood has taken place in the UK, little research has been conducted within the early childhood area in Australia. This paper describes a study which sought to investigate how the design, make and appraise approach could be implemented within early childhood using existing materials, procedures and teaching programmes. In particular, the pre-school programme was considered to see if the approach was suitable for young children, and if girls could be encouraged into this newly defined area of study.

Measuring Integration of Information and Communication Technology in Education: An Item Response Modeling Approach

ERIC Educational Resources Information Center

Peeraer, Jef; Van Petegem, Peter

2012-01-01

This research describes the development and validation of an instrument to measure integration of Information and Communication Technology (ICT) in education. After literature research on definitions of integration of ICT in education, a comparison is made between the classical test theory and the item response modeling approach for the…

Urban Explorations for Language Learning: A Gamified Approach to Teaching Italian in a University Context

ERIC Educational Resources Information Center

Charitonos, Koula; Morini, Luca; Arnab, Sylvester; Cervi-Wilson, Tiziana; Brick, Billy

2016-01-01

The recent technological developments and widespread use of mobile technologies challenge traditional knowledge and skills, with language learning increasingly taking place beyond the language classroom in learners' own environments. The paper presents the ImparApp study that focuses on a pervasive and gamified approach to language teaching and…

Detection of Intestinal Protozoa in the Clinical Laboratory

PubMed Central

McHardy, Ian H.; Wu, Max; Shimizu-Cohen, Robyn; Couturier, Marc Roger

2014-01-01

Despite recent advances in diagnostic technology, microscopic examination of stool specimens remains central to the diagnosis of most pathogenic intestinal protozoa. Microscopy is, however, labor-intensive and requires a skilled technologist. New, highly sensitive diagnostic methods have been developed for protozoa endemic to developed countries, including Giardia lamblia (syn. G. intestinalis/G. duodenalis) and Cryptosporidium spp., using technologies that, if expanded, could effectively complement or even replace microscopic approaches. To date, the scope of such novel technologies is limited and may not include common protozoa such as Dientamoeba fragilis, Entamoeba histolytica, or Cyclospora cayetanensis. This minireview describes canonical approaches for the detection of pathogenic intestinal protozoa, while highlighting recent developments and FDA-approved tools for clinical diagnosis of common intestinal protozoa. PMID:24197877

Detection of intestinal protozoa in the clinical laboratory.

PubMed

McHardy, Ian H; Wu, Max; Shimizu-Cohen, Robyn; Couturier, Marc Roger; Humphries, Romney M

2014-03-01

Despite recent advances in diagnostic technology, microscopic examination of stool specimens remains central to the diagnosis of most pathogenic intestinal protozoa. Microscopy is, however, labor-intensive and requires a skilled technologist. New, highly sensitive diagnostic methods have been developed for protozoa endemic to developed countries, including Giardia lamblia (syn. G. intestinalis/G. duodenalis) and Cryptosporidium spp., using technologies that, if expanded, could effectively complement or even replace microscopic approaches. To date, the scope of such novel technologies is limited and may not include common protozoa such as Dientamoeba fragilis, Entamoeba histolytica, or Cyclospora cayetanensis. This minireview describes canonical approaches for the detection of pathogenic intestinal protozoa, while highlighting recent developments and FDA-approved tools for clinical diagnosis of common intestinal protozoa.

Using Work Breakdown Structure Models to Develop Unit Treatment Costs

EPA Science Inventory

This article presents a new cost modeling approach called work breakdown structure (WBS), designed to develop unit costs for drinking water technologies. WBS involves breaking the technology into its discrete components for the purposes of estimating unit costs. The article dem...

Invigorate Technology Training Districtwide

ERIC Educational Resources Information Center

Steele, Gloria; Eib, B. J.

2004-01-01

South Dakota's Spearfish School District used a comprehensive approach to its educators' professional development to integrate technology into instructional practices. In 1998, the Spearfish School District's budget for professional development more than doubled for each of the next five years, funds coming from the South Dakota Learning…

Technology Assessment for Future MILSATCOM Systems; An Update of the EHF Bands

DTIC Science & Technology

1980-10-01

converging these efforts, the MSO has prepared a "Technology Development Program Plan" ( TDPP ). The TOPP defines a coordinated approach to the R&D...required to insure the availability of the technology necessary to support future systems. Some of the objectives of the TDPP are: to minimize...and TDPP have illuminated the need for technology development efforts directed toward minimizing the cost- risk and schedule-risk, and insuring the

Effect of Makerspace Professional Development Activities on Elementary and Middle School Educator Perceptions of Integrating Technologies with STEM (Science, Technology, Engineering, Mathematics)

ERIC Educational Resources Information Center

Miller, Jennifer Renea

2016-01-01

This study investigated a Makerspace professional development program, the Makers' Guild, provided to teachers within north Texas over the course of a semester. The research employed a constructionist approach delivered via 2D and 3D technologies during STEM instructional activities within a creative space. Participants reported statistically…

Integrated hydrogen/oxygen technology applied to auxiliary propulsion systems

NASA Technical Reports Server (NTRS)

Gerhardt, David L.

1990-01-01

The purpose of the Integrated Hydrogen/Oxygen Technology (IHOT) study was to determine if the vehicle/mission needs and technology of the 1990's support development of an all cryogenic H2/O2 system. In order to accomplish this, IHOT adopted the approach of designing Integrated Auxiliary Propulsion Systems (IAPS) for a representative manned vehicle; the advanced manned launch system. The primary objectives were to develop IAPS concepts which appeared to offer viable alternatives to state-of-the-art (i.e., hypergolic, or earth-storable) APS approaches. The IHOT study resulted in the definition of three APS concepts; two cryogenic IAPS, and a third concept utilizing hypergolic propellants.

North Carolina's Approach: Developing a Bio-Tech Workforce

ERIC Educational Resources Information Center

Smit, Norman

2004-01-01

States across the country are all chasing what are becoming known as "new-age" technologies. These are technologies such as biotechnology, nanotechnology, bio-informatics and others. These technologies offer the potential for long-term economic growth and well-paid jobs to employees working in these sectors. As these technologies mature,…

Food Safety and Intervention Technologies Research: Cold Plasma as a Nonthermal food processing technology

USDA-ARS?s Scientific Manuscript database

Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. The Food Safety and Intervention Technologies Research Unit develops and validates innovative approaches and new technologies that control pathogenic bacteria and viruses while preser...

Food Safety and Intervention Technologies research: cold plasma as a nonthermal food processing technology

USDA-ARS?s Scientific Manuscript database

Contamination of meats, seafood, poultry, eggs, and fresh and fresh-cut fruits and vegetables is an ongoing concern. The Food Safety and Intervention Technologies Research Unit develops and validates innovative approaches and new technologies that control pathogenic bacteria and viruses while preser...

Applying Sustainable Systems Development Approach to Educational Technology Systems

ERIC Educational Resources Information Center

Huang, Albert

2012-01-01

Information technology (IT) is an essential part of modern education. The roles and contributions of technology to education have been thoroughly documented in academic and professional literature. Despite the benefits, the use of educational technology systems (ETS) also creates a significant impact on the environment, primarily due to energy…

Identifying Advanced Technologies for Education's Future.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; Yin, Robert K.

A study to determine how three advanced technologies might be applied to the needs of special education students helped inspire the development of a new method for identifying such applications. This new method, named the "Hybrid Approach," combines features of the two traditional methods: technology-push and demand-pull. Technology-push involves…

Technological Pedagogical Content Knowledge Development: Integrating Technology with a Research Teaching Perspective

ERIC Educational Resources Information Center

Guerra, Cecilia; Moreira, Antonio; Vieira, Rui

2017-01-01

Technological Pedagogical Content Knowledge (TPCK) represents the teachers' professional knowledge needed to integrate technology in education. Following a design-based approach this study describes the strategies for designing and assessing an in-service science teacher education course. Data was obtained through interviews, questionnaires, using…

Community Outreach Projects as a Sustainable Way of Introducing Information Technology in Developing Countries

ERIC Educational Resources Information Center

Zlotnikova, Irina; van der Weide, Theo

2015-01-01

The paper describes an approach to the sustainable introduction of IT in developing countries based on international collaboration between students taking the form of a knowledge bridge. The authors consider the challenges for introducing information technologies in developing countries; one of these is lack of reading materials ultimately leading…

An analysis of microsystems development at Sandia National Laboratories

NASA Astrophysics Data System (ADS)

Herrera, Gilbert V.; Myers, David R.

2011-06-01

While Sandia initially was motivated to investigate emergent microsystem technology to miniaturize existing macroscale structures, present designs embody innovative approaches that directly exploit the fundamentally different material properties of a new technology at the micro- and nano-scale. Direct, hands-on experience with the emerging technology gave Sandia engineers insights that not only guided the evolution of the technology but also enabled them to address new applications that enlarged the customer base for the new technology. Sandia's early commitment to develop complex microsystems demonstrated the advantages that early adopters gain by developing an extensive design and process tool kit and a shared awareness of multiple approaches to achieve the multiple goals. As with any emergent technology, Sandia's program benefited from interactions with the larger technical community. However, custom development followed a spiral path of direct trial-and-error experience, analysis, quantification of materials properties at the micro- and nano-scale, evolution of design tools and process recipes, and an understanding of reliability factors and failure mechanisms even in extreme environments. The microsystems capability at Sandia relied on three key elements. The first was people: a mix of mechanical and semiconductor engineers, chemists, physical scientists, designers, and numerical analysts. The second was a unique facility that enabled the development of custom technologies without contaminating mainline product deliveries. The third was the arrival of specialized equipment as part of a Cooperative Research And Development Agreement (CRADA) enabled by the National Competitiveness Technology Transfer Act of 1989. Underpinning all these, the program was guided and sustained through the research and development phases by accomplishing intermediate milestones addressing direct mission needs.

USEPA SITE PROGRAM APPROACH TO TECHNOLOGY TRANSFER AND REGULATORY ACCEPTANCE

EPA Science Inventory

The SITE Program was created to meet the increased demand for innovative technologies for hazardous waste treatment. To accomplish this mission, the program seeks to advance the development, implementation and commercialization of innovative technologies for hazardous waste chara...

The ATHENA optics development

NASA Astrophysics Data System (ADS)

Bavdaz, Marcos; Wille, Eric; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Barriere, Nicolas; Yanson, Alexei; Vacanti, Giuseppe; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heinz; Christensen, Finn; Della Monica Ferreira, Desiree; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis

2016-07-01

ATHENA (Advanced Telescope for High ENergy Astrophysics) is being studied by the European Space Agency (ESA) as the second large science mission, with a launch slot in 2028. System studies and technology preparation activities are on-going. The optics of the telescope is based on the modular Silicon Pore Optics (SPO), a novel X-ray optics technology significantly benefiting from spin-in from the semiconductor industry. Several technology development activities are being implemented by ESA in collaboration with European industry and institutions. The related programmatic background, technology development approach and the associated implementation planning are presented.

[Classification and organization technologies in public health].

PubMed

Filatov, V B; Zhiliaeva, E P; Kal'fa, Iu I

2000-01-01

The authors discuss the impact and main characteristics of organization technologies in public health and the processes of their development and evaluation. They offer an original definition of the notion "organization technologies" with approaches to their classification. A system of logical bases is offered, which can be used for classification. These bases include the level of organization maturity and stage of development of organization technology, its destination to a certain level of management, type of influence and concentration of trend, mechanism of effect, functional group, and methods of development.

The Roles and Uses of Design Principles for Developing the Trialogical Approach on Learning

ERIC Educational Resources Information Center

Paavola, Sami; Lakkala, Minna; Muukkonen, Hanni; Kosonen, Kari; Karlgren, Klas

2011-01-01

In the present paper, the development and use of a specific set of pedagogical design principles in a large research and development project are analysed. The project (the Knowledge Practices Laboratory) developed technology and a pedagogical approach to support certain kinds of collaborative knowledge creation practices related to the…

Ethics in technological culture: a programmatic proposal for a pragmatist approach.

PubMed

Keulartz, Jozef; Schermer, Maartje; Korthals, Michiel; Swierstra, Tsjalling

2004-01-01

Neither traditional philosophy nor current applied ethics seem able to cope adequately with the highly dynamic character of our modern technological culture. This is because they have insufficient insight into the moral significance of technological artifacts and systems. Here, much can be learned from recent science and technology studies (STS). They have opened up the black box of technological developments and have revealed the intimate intertwinement of technology and society in minute detail. However, while applied ethics is characterized by a certain "technology blindness," the most influential approaches within STS show a "normative deficit" and display on agnostic or even antagonistic attitude toward ethics. To repair the blind spots of both applied ethics and STS, the authors sketch the contours of a pragmatist approach. They will explore the tasks and tools of a pragmatist ethics and pay special attention to the exploration of future worlds disclosed and shaped by technology and the management of deep value conflicts inherent in a pluralistic society.

Demonstration of Passive Fuel Cell Thermal Management Technology

NASA Technical Reports Server (NTRS)

Burke, Kenneth A.; Jakupca, Ian; Colozza, Anthony; Wynne, Robert; Miller, Michael; Meyer, Al; Smith, William

2012-01-01

The NASA Glenn Research Center is developing advanced passive thermal management technology to reduce the mass and improve the reliability of space fuel cell systems for the NASA Exploration program. The passive thermal management system relies on heat conduction within highly thermally conductive cooling plates to move the heat from the central portion of the cell stack out to the edges of the fuel cell stack. Using the passive approach eliminates the need for a coolant pump and other cooling loop components within the fuel cell system which reduces mass and improves overall system reliability. Previous development demonstrated the performance of suitable highly thermally conductive cooling plates and integrated heat exchanger technology to collect the heat from the cooling plates (Ref. 1). The next step in the development of this passive thermal approach was the demonstration of the control of the heat removal process and the demonstration of the passive thermal control technology in actual fuel cell stacks. Tests were run with a simulated fuel cell stack passive thermal management system outfitted with passive cooling plates, an integrated heat exchanger and two types of cooling flow control valves. The tests were run to demonstrate the controllability of the passive thermal control approach. Finally, successful demonstrations of passive thermal control technology were conducted with fuel cell stacks from two fuel cell stack vendors.

Converging, pervasive technologies: chronic and emerging issues and policy adequacy.

PubMed

Seelman, Katherine D

2008-01-01

This article is a thought piece with the expansive goal of identifying policy facilitators and barriers to the development of usable and accessible advanced information and communications technology for people with disabilities across the age span at the research and development and marketing stages. The working hypothesis is as follows: The lack of participation in and representation of the interests of people with disabilities in the technology resource system is a barrier to availability of affordable consumer goods that enable independence and community integration. Converging, pervasive computing technology, especially in housing applications, is used as a case example, drawing especially from research and development conducted by the National Science Foundation Quality of Life Technology Engineering Research Center. A critical theory approach is used to identify problems and seek solutions to the apparent lack of balance between the demand and needs of disabled users and the supply and availability of usable, affordable consumer goods produced by the technology resource system in which allocation decisions are made. The approach uses policy analysis tools such as a technology assessment framework; the participation and environment components of the World Health Organization's International Classification of Functioning, Disability and Health; and participatory action research.

THz spectroscopy: An emerging technology for pharmaceutical development and pharmaceutical Process Analytical Technology (PAT) applications

NASA Astrophysics Data System (ADS)

Wu, Huiquan; Khan, Mansoor

2012-08-01

As an emerging technology, THz spectroscopy has gained increasing attention in the pharmaceutical area during the last decade. This attention is due to the fact that (1) it provides a promising alternative approach for in-depth understanding of both intermolecular interaction among pharmaceutical molecules and pharmaceutical product quality attributes; (2) it provides a promising alternative approach for enhanced process understanding of certain pharmaceutical manufacturing processes; and (3) the FDA pharmaceutical quality initiatives, most noticeably, the Process Analytical Technology (PAT) initiative. In this work, the current status and progress made so far on using THz spectroscopy for pharmaceutical development and pharmaceutical PAT applications are reviewed. In the spirit of demonstrating the utility of first principles modeling approach for addressing model validation challenge and reducing unnecessary model validation "burden" for facilitating THz pharmaceutical PAT applications, two scientific case studies based on published THz spectroscopy measurement results are created and discussed. Furthermore, other technical challenges and opportunities associated with adapting THz spectroscopy as a pharmaceutical PAT tool are highlighted.

Introduction of Digital Computer Technology Into the Undergraduate Chemistry Laboratory. Final Technical Report.

ERIC Educational Resources Information Center

Perone, Sam P.

The objective of this project has been the development of a successful approach for the incorporation of on-line computer technology into the undergraduate chemistry laboratory. This approach assumes no prior programing, electronics or instrumental analysis experience on the part of the student; it does not displace the chemistry content with…

Technology Acceptance of Healthcare E-Learning Modules: A Study of Korean and Malaysian Students' Perceptions

ERIC Educational Resources Information Center

Neo, Mai; Park, Heykyung; Lee, Min-Jae; Soh, Jian-Yuan; Oh, Ji-Young

2015-01-01

Educators today are moving towards transforming their teaching and learning methods from conventional teacher-centered approaches to student-centered learning approaches with the support of technology so as to better motivate students to participate and engage in their learning process. This study was developed as a joint collaborative effort…

An Exploration into First-Year University Students' Approaches to Inquiry and Online Learning Technologies in Blended Environments

ERIC Educational Resources Information Center

Ellis, Robert A.; Bliuc, Ana-Maria

2016-01-01

The use of online learning technologies in experiences of inquiry is increasingly ubiquitous in university contexts. In blended environments, research into university experiences suggests that student approaches to learning are a key determiner of the quality of outcomes. The purpose of this study was to develop relevant measures which help…

Teaching Tech Literacy to the MySpace Generation: When It Comes to Sharpening Students' IT Skills, Districts Take Different Approaches

ERIC Educational Resources Information Center

Heun, Christopher

2006-01-01

This article describes the approaches taken by various school districts in teaching technology literacy to their students. One such example is the Science Leadership Academy in Philadelphia, developed in partnership with The Franklin Institute, a science museum, which teaches a curriculum that stresses science, technology, mathematics, and…

A risk based approach for SSTO/TSTO comparisons

NASA Astrophysics Data System (ADS)

Greenberg, Joel S.

1996-03-01

An approach has been developed for performing early comparisons of transportation architectures explicitly taking into account quantitative measures of uncertainty and resulting risk. Risk considerations are necessary since the transportation systems are likely to have significantly different levels of risk, both because of differing degrees of freedom in achieving desired performance levels and their different states of development and utilization. The approach considers the uncertainty of achievement of technology goals, effect that the achieved technology level will have on transportation system performance and the relationship between system performance/capability and the ability to accommodate variations in payload mass. The consequences of system performance are developed in terms of nonrecurring, recurring, and the present value of transportation system life cycle costs.

Enhancing emergency care in low-income countries using mobile technology-based training tools

PubMed Central

Edgcombe, Hilary; Paton, Chris; English, Mike

2016-01-01

In this paper, we discuss the role of mobile technology in developing training tools for health workers, with particular reference to low-income countries (LICs). The global and technological context is outlined, followed by a summary of approaches to using and evaluating mobile technology for learning in healthcare. Finally, recommendations are made for those developing and using such tools, based on current literature and the authors' involvement in the field. PMID:27658948

Economic and developmental considerations for pharmacogenomic technology.

PubMed

Vernon, John A; Johnson, Scott J; Hughen, W Keener; Trujillo, Antonio

2006-01-01

The pharmaceutical industry's core business is the innovation, development and marketing of new drugs. Pharmacogenetic (PG) testing and technology has the potential to increase a drug's value in many ways. A critical issue for the industry is whether products in development should be teamed with genetic tests that could segment the total population into responders and non-responders. In this paper we use a cost-effectiveness framework to model the strategic decision-making considerations by pharmaceutical manufacturers as they relate to drug development and the new technology of PG (the science of using genetic markers to predict drug response). In a simple, static, one-period model we consider three drug development strategies: a drug is exclusively developed and marketed to patients with a particular genetic marker; no distinguishing among patients based on the expression of a genetic marker is made (traditional approach); and a strategy whereby a drug is marketed to patients both with and without the genetic marker but there is price discrimination between the two subpopulations. We developed three main principles: revenues under a strategy targeting only the responder subpopulation will never generate more revenue than that which could have been obtained under a traditional approach; total revenues under a targeted PG strategy will be less than that under a traditional approach but higher than a naive [corrected] view would believe them to be; and a traditional [corrected] approach will earn the same total revenues as a price discrimination strategy, assuming no intermarket arbitrage. While these principles relate to the singular (and quite narrow) consideration of drug revenues, they may nevertheless partially explain why PG is not being used as widely as was predicted several years ago when the technology first became available, especially in terms of pharmaceutical manufacturer-developed tests.

Long life Regenerative Fuel Cell technology development plan

NASA Technical Reports Server (NTRS)

Littman, Franklin D.; Cataldo, Robert L.; Mcelroy, James F.; Stedman, Jay K.

1992-01-01

This paper summarizes a technology roadmap for completing advanced development of a Proton Exchange Membrane (PEM) Regenerative Fuel Cell (RFC) to meet long life (20,000 hrs at 50 percent duty cycle) mobile or portable power system applications on the surface of the moon and Mars. Development of two different sized RFC power system modules is included in this plan (3 and 7.5 kWe). A conservative approach was taken which includes the development of a Ground Engineering System, Qualification Unit, and Flight Unit. This paper includes a concept description, technology assessment, development issues, development tasks, and development schedule.

Cutting Edge Technologies Presentation: An Overview of Developing Sensor Technology Directions and Possible Barriers to New Technology Implementation

NASA Technical Reports Server (NTRS)

Hunter, Gary W.

2007-01-01

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A range of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption; and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity, However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This presentation gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology.

Autonomous rendezvous and capture development infrastructure

NASA Technical Reports Server (NTRS)

Bryan, Thomas C.; Roe, Fred; Coker, Cindy; Nelson, Pam; Johnson, B.

1991-01-01

In the development of the technology for autonomous rendezvous and docking, key infrastructure capabilities must be used for effective and economical development. This involves facility capabilities, both equipment and personnel, to devise, develop, qualify, and integrate ARD elements and subsystems into flight programs. One effective way of reducing technical risks in developing ARD technology is the use of the ultimate test facility, using a Shuttle-based reusable free-flying testbed to perform a Technology Demonstration Test Flight which can be structured to include a variety of additional sensors, control schemes, and operational approaches. This conceptual testbed and flight demonstration will be used to illustrate how technologies and facilities at MSFC can be used to develop and prove an ARD system.

Determinants of Computer Utilization by Extension Personnel: A Structural Equations Approach

ERIC Educational Resources Information Center

Sivakumar, Paramasivan Sethuraman; Parasar, Bibudha; Das, Raghu Nath; Anantharaman, Mathevanpillai

2014-01-01

Purpose: Information technology (IT) has tremendous potential for fostering grassroots development and the Indian government has created various capital-intensive computer networks to promote agricultural development. However, research studies have shown that information technology investments are not always translated into productivity gains due…

FLPP NGL Structural Subsystems Activity

NASA Astrophysics Data System (ADS)

Jaredson, D.; Ramusat, G.; Appel, S.; Cardone, T.; Persson, J.; Baiocco, P.; Lavelle, F.; Bouilly, Th.

2012-07-01

The ESA Future Launchers Preparatory Programme (FLPP) is the basis for new paradigms, investigating the key elements, logic and roadmaps to prepare the development of the safe, reliable and low cost next European Launch Vehicle (LV) for access to space (dubbed NGL - Next Generation LV), with an initial operational capability mid-next decade. In addition to carry cargo to conventional GTO or SSO, the European NGL has to be flexible enough to cope with new pioneering institutional missions as well as the evolving commercial payloads market. This achievement is broached studying three main areas relevant to ELVs: System concepts, Propulsion and Core Technology During the preliminary design activity, a number of design alternatives concerning NGL main structural subsystems have been investigated. Technology is one of the ways to meet the NGL challenges to either improve the performances or to reduce the cost or both. The relevant requirements allow to steer a ‘top-down’ approach for their conception and to propose the most effective technologies. Furthermore, all these technology developments represent a significant ‘bottom-up’ approach investment and concern a large range of activities. The structural subsystems portfolio of the FLPP ‘Core Technology’ activity encompasses major cutting-edge challenges for maturation of the various subsystems leading to reduce overall structural mass, increasing structural margins for robustness, metallic and composite containment of cryogenic propellants, significantly reducing fabrication and operations cost, etc. to derive performing upper and booster stages. Application of concurrent engineering methods will allow developments of performing technology demonstrators in terms of need, demonstration objective, size and cost yielding to safe, low-risk technical approaches for a future development. Potential ability of these advanced structural LV technologies to satisfy the system requirements of the NGL and their current and targeted technology readiness (i.e. TRL 6 by 2016) are being assessed to check whether a future flawless development could be performed within a given budget and schedule. The paper outlines the various technology developments for the pressurised and unpressurised structure subsystems and describes the implementation methodology, some of the current technology works performed and achieved accomplishments up to now. This is in strong connection with the “system” activity dealing with the same matter [1].

Satellite Power Systems (SPS) concept definition study (exhibit C)

NASA Technical Reports Server (NTRS)

Hanley, G. M.

1978-01-01

A coplanar satellite conceptual approach was defined. This effort included several trade studies related to satellite design and also construction approaches for this satellite. A transportation system, consistent with this concept, was also studied, including an electric orbit transfer vehicle and a parallel-burn heavy lift launch vehicle. Work on a solid state microwave concept continued and several alternative approaches were evaluated. Computer determination of an optimized transistor and circuit design was also continued. Experiment/verification planning resulted in the development of a total solar array and microwave technology development plan, as well as definition of near-term research to evaluate key technology issues.

'Beautiful' unconventional synthesis and processing technologies of superconductors and some other materials.

PubMed

Badica, Petre; Crisan, Adrian; Aldica, Gheorghe; Endo, Kazuhiro; Borodianska, Hanna; Togano, Kazumasa; Awaji, Satoshi; Watanabe, Kazuo; Sakka, Yoshio; Vasylkiv, Oleg

2011-02-01

Superconducting materials have contributed significantly to the development of modern materials science and engineering. Specific technological solutions for their synthesis and processing helped in understanding the principles and approaches to the design, fabrication and application of many other materials. In this review, we explore the bidirectional relationship between the general and particular synthesis concepts. The analysis is mostly based on our studies where some unconventional technologies were applied to different superconductors and some other materials. These technologies include spray-frozen freeze-drying, fast pyrolysis, field-assisted sintering (or spark plasma sintering), nanoblasting, processing in high magnetic fields, methods of control of supersaturation and migration during film growth, and mechanical treatments of composite wires. The analysis provides future research directions and some key elements to define the concept of 'beautiful' technology in materials science. It also reconfirms the key position and importance of superconductors in the development of new materials and unconventional synthesis approaches.

Thermal management for high power space platform systems

NASA Technical Reports Server (NTRS)

Gualdoni, R. A.

1980-01-01

With future spacecraft power requirements expected to be in the order of 100 to 250 kilowatts and orbital lifetimes in the order of five to ten years, new approaches and concepts will be required that can efficiently and cost effectively provide the required heat rejection and temperature control capabilities. A plan was established to develop the commensurate technologies necessary for the thermal management of a high power space platform representative of future requirements and to achieve technology readiness by 1987. The approach taken in developing the program was to view the thermal requirements of the spacecraft as a spacecraft system rather than each as an isolated thermal problem. The program plan proposes 45 technology tasks required to achieve technology readiness. Of this total, 24 tasks were subsequently identified as being pacing technology tasks and were recommended for initiation in FY 1980 and FY 1981.

Towards G2G: Systems of Technology Database Systems

NASA Technical Reports Server (NTRS)

Maluf, David A.; Bell, David

2005-01-01

We present an approach and methodology for developing Government-to-Government (G2G) Systems of Technology Database Systems. G2G will deliver technologies for distributed and remote integration of technology data for internal use in analysis and planning as well as for external communications. G2G enables NASA managers, engineers, operational teams and information systems to "compose" technology roadmaps and plans by selecting, combining, extending, specializing and modifying components of technology database systems. G2G will interoperate information and knowledge that is distributed across organizational entities involved that is ideal for NASA future Exploration Enterprise. Key contributions of the G2G system will include the creation of an integrated approach to sustain effective management of technology investments that supports the ability of various technology database systems to be independently managed. The integration technology will comply with emerging open standards. Applications can thus be customized for local needs while enabling an integrated management of technology approach that serves the global needs of NASA. The G2G capabilities will use NASA s breakthrough in database "composition" and integration technology, will use and advance emerging open standards, and will use commercial information technologies to enable effective System of Technology Database systems.

An Integrated Approach for Preservice Teachers' Acceptance and Use of Technology: UTAUT-PST Scale

ERIC Educational Resources Information Center

Kabakçi-Yurdakul, Isil; Ursavas, Ömer Faruk; Becit-Isçitürk, Gökçe

2014-01-01

Problem Statement: In educational systems, teachers and preservice teachers are the keys to the effective use of technology in the teaching and learning processes. Predicting teachers' technology acceptance and use remains an important issue. Models and theories have been developed to explain and predict technology acceptance. The Unified Theory…

Can an Objective Measure of Technological Pedagogical Content Knowledge (TPACK) Supplement Existing TPACK Measures?

ERIC Educational Resources Information Center

Drummond, Aaron; Sweeney, Trudy

2017-01-01

In recent years, approaches to developing teacher competency in technology integration have moved away from an over emphasis on technological knowledge, to focus on the essential connections between technology, pedagogy and content knowledge (TPACK) (Chai, Koh, & Tsai, 2013a; Harris, Mishra, & Koehler, 2009; Mishra & Koehler, 2006). A…

Autonomous onboard crew operations: A review and developmental approach

NASA Technical Reports Server (NTRS)

Rogers, J. G.

1982-01-01

A review of the literature generated by an intercenter mission approach and consolidation team and their contractors was performed to obtain background information on the development of autonomous operations concepts for future space shuttle and space platform missions. The Boeing 757/767 flight management system was examined to determine the relevance for transfer of the developmental approach and technology to the performance of the crew operations function. In specific, the engine indications and crew alerting system was studied to determine the relevance of this display for the performance of crew operations onboard the vehicle. It was concluded that the developmental approach and technology utilized in the aeronautics industry would be appropriate for development of an autonomous operations concept for the space platform.

Mammalian cell display technology coupling with AID induced SHM in vitro: an ideal approach to the production of therapeutic antibodies.

PubMed

Qin, Chang-Fei; Li, Guan-Cheng

2014-12-01

Traditional antibody production technology within non-mammalian cell expression systems has shown many unsatisfactory properties for the development of therapeutic antibodies. Nevertheless, mammalian cell display technology reaps the benefits of producing full-length all human antibodies. Together with the developed cytidine deaminase induced in vitro somatic hypermutation technology, mammalian cell display technology provides the opportunity to produce high affinity antibodies that might be ideal for therapeutic application. This review was concentrated on the development of the mammalian cell display technology as well as the activation-induced cytidine deaminase induced in vitro somatic hypermutation technology and their applications for the production of therapeutic antibodies. Copyright © 2014 Elsevier B.V. All rights reserved.

The Development of Educational Technology Policies (1996-2012): Lessons from China and the USA

ERIC Educational Resources Information Center

Alamin, Alnuaman A.; Shaoqing, Guo; Le, Zhang

2015-01-01

This study reviews the development of educational technology macro policies in China and USA based on the historical juxtaposition approach. It shows that, despite the fact that two countries have major differences, with China officially being a socialist country, while the USA is a capitalist country; the development of educational technology…

A Professional Development Project for Improving the Use of Information and Communication Technologies in Science Teaching

ERIC Educational Resources Information Center

Lavonen, Jari; Juuti, Kalle; Aksela, Maija; Meisalo, Veijo

2006-01-01

This article describes a professional development project aiming to develop practical approaches for the integration of information and communication technologies (ICT) into science education. Altogether, 13 two-day face-to-face seminars and numerous computer network conferences were held during a three-year period. The goals for the project were…

A taxonomy for the evolution of human settlements on the moon and Mars

NASA Technical Reports Server (NTRS)

Roberts, Barney B.; Mandell, Humboldt C.

1991-01-01

A proposed structure is described for partnerships with shared interests and investments to develop the technology and approach for evolutionary surface systems for the moon and Mars. Five models are presented for cooperation with specific references to the technical evolutionary path of the surface systems. The models encompass the standard customer/provider relationship, a concept for exclusive government use, a joint venture with a government-sponsored non-SEI market, a technology joint-development approach, and a redundancy model to insure competitive pricing. The models emphasize the nonaerospace components of the settlement technologies and the decentralized nature of surface systems that make the project suitable for private industrial development by several companies. It is concluded that the taxonomy be considered when examining collaborative opportunities for lunar and Martian settlement.

Hosted Services for Advanced V and V Technologies: An Approach to Achieving Adoption without the Woes of Usage

NASA Technical Reports Server (NTRS)

Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.; OMalley, Owen; Brew, William A.

2003-01-01

Attempts to achieve widespread use of software verification tools have been notably unsuccessful. Even 'straightforward', classic, and potentially effective verification tools such as lint-like tools face limits on their acceptance. These limits are imposed by the expertise required applying the tools and interpreting the results, the high false positive rate of many verification tools, and the need to integrate the tools into development environments. The barriers are even greater for more complex advanced technologies such as model checking. Web-hosted services for advanced verification technologies may mitigate these problems by centralizing tool expertise. The possible benefits of this approach include eliminating the need for software developer expertise in tool application and results filtering, and improving integration with other development tools.

Integrating health economics modeling in the product development cycle of medical devices: a Bayesian approach.

PubMed

Vallejo-Torres, Laura; Steuten, Lotte M G; Buxton, Martin J; Girling, Alan J; Lilford, Richard J; Young, Terry

2008-01-01

Medical device companies are under growing pressure to provide health-economic evaluations of their products. Cost-effectiveness analyses are commonly undertaken as a one-off exercise at the late stage of development of new technologies; however, the benefits of an iterative use of economic evaluation during the development process of new products have been acknowledged in the literature. Furthermore, the use of Bayesian methods within health technology assessment has been shown to be of particular value in the dynamic framework of technology appraisal when new information becomes available in the life cycle of technologies. In this study, we set out a methodology to adapt these methods for their application to directly support investment decisions in a commercial setting from early stages of the development of new medical devices. Starting with relatively simple analysis from the very early development phase and proceeding to greater depth of analysis at later stages, a Bayesian approach facilitates the incorporation of all available evidence and would help companies to make better informed choices at each decision point.

Toward a Method for Exposing and Elucidating Ethical Issues with Human Cognitive Enhancement Technologies.

PubMed

Hofmann, Bjørn

2017-04-01

To develop a method for exposing and elucidating ethical issues with human cognitive enhancement (HCE). The intended use of the method is to support and facilitate open and transparent deliberation and decision making with respect to this emerging technology with great potential formative implications for individuals and society. Literature search to identify relevant approaches. Conventional content analysis of the identified papers and methods in order to assess their suitability for assessing HCE according to four selection criteria. Method development. Amendment after pilot testing on smart-glasses. Based on three existing approaches in health technology assessment a method for exposing and elucidating ethical issues in the assessment of HCE technologies was developed. Based on a pilot test for smart-glasses, the method was amended. The method consists of six steps and a guiding list of 43 questions. A method for exposing and elucidating ethical issues in the assessment of HCE was developed. The method provides the ground work for context specific ethical assessment and analysis. Widespread use, amendments, and further developments of the method are encouraged.

Indoor Air Vapor Intrusion Mitigation Approaches

EPA Pesticide Factsheets

The National Risk Management Research Laboratory has developed a technology transfer document regarding management and treatment of vapor intrusion into building structures. This document describes the range of mitigation technologies available.

Chelation technology: a promising green approach for resource management and waste minimization.

PubMed

Chauhan, Garima; Pant, K K; Nigam, K D P

2015-01-01

Green chemical engineering recognises the concept of developing innovative environmentally benign technologies to protect human health and ecosystems. In order to explore this concept for minimizing industrial waste and for reducing the environmental impact of hazardous chemicals, new greener approaches need to be adopted for the extraction of heavy metals from industrial waste. In this review, a range of conventional processes and new green approaches employed for metal extraction are discussed in brief. Chelation technology, a modern research trend, has shown its potential to develop sustainable technology for metal extraction from various metal-contaminated sites. However, the interaction mechanism of ligands with metals and the ecotoxicological risk associated with the increased bioavailability of heavy metals due to the formation of metal-chelant complexes is still not sufficiently explicated in the literature. Therefore, a need was felt to provide a comprehensive state-of-the-art review of all aspects associated with chelation technology to promote this process as a green chemical engineering approach. This article elucidates the mechanism and thermodynamics associated with metal-ligand complexation in order to have a better understanding of the metal extraction process. The effects of various process parameters on the formation and stability of complexes have been elaborately discussed with respect to optimizing the chelation efficiency. The non-biodegradable attribute of ligands is another important aspect which is currently of concern. Therefore, biotechnological approaches and computational tools have been assessed in this review to illustrate the possibility of ligand degradation, which will help the readers to look for new environmentally safe mobilizing agents. In addition, emerging trends and opportunities in the field of chelation technology have been summarized and the diverse applicability of chelation technology in metal extraction from contaminated sites has also been reviewed.

Methods for Addressing Technology-induced Errors: The Current State.

PubMed

Borycki, E; Dexheimer, J W; Hullin Lucay Cossio, C; Gong, Y; Jensen, S; Kaipio, J; Kennebeck, S; Kirkendall, E; Kushniruk, A W; Kuziemsky, C; Marcilly, R; Röhrig, R; Saranto, K; Senathirajah, Y; Weber, J; Takeda, H

2016-11-10

The objectives of this paper are to review and discuss the methods that are being used internationally to report on, mitigate, and eliminate technology-induced errors. The IMIA Working Group for Health Informatics for Patient Safety worked together to review and synthesize some of the main methods and approaches associated with technology- induced error reporting, reduction, and mitigation. The work involved a review of the evidence-based literature as well as guideline publications specific to health informatics. The paper presents a rich overview of current approaches, issues, and methods associated with: (1) safe HIT design, (2) safe HIT implementation, (3) reporting on technology-induced errors, (4) technology-induced error analysis, and (5) health information technology (HIT) risk management. The work is based on research from around the world. Internationally, researchers have been developing methods that can be used to identify, report on, mitigate, and eliminate technology-induced errors. Although there remain issues and challenges associated with the methodologies, they have been shown to improve the quality and safety of HIT. Since the first publications documenting technology-induced errors in healthcare in 2005, we have seen in a short 10 years researchers develop ways of identifying and addressing these types of errors. We have also seen organizations begin to use these approaches. Knowledge has been translated into practice in a short ten years whereas the norm for other research areas is of 20 years.

In-Suit Doppler Technology Assessment

NASA Technical Reports Server (NTRS)

Schulze, Arthur E.; Greene, Ernest R.; Nadeau, John J.

1991-01-01

The objective of this program was to perform a technology assessment survey of non-invasive air embolism detection utilizing Doppler ultrasound methodologies. The primary application of this technology will be a continuous monitor for astronauts while performing extravehicular activities (EVA's). The technology assessment was to include: (1) development of a full understanding of all relevant background research; and (2) a survey of the medical ultrasound marketplace for expertise, information, and technical capability relevant to this development. Upon completion of the assessment, LSR was to provide an overview of technological approaches and R&D/manufacturing organizations.

Strategic avionics technology planning

NASA Technical Reports Server (NTRS)

Cox, Kenneth J.; Brown, Don C.

1991-01-01

NASA experience in development and insertion of technology into programs had led to a recognition that a Strategic Plan for Avionics is needed for space. In the fall of 1989 an Avionics Technology Symposium was held in Williamsburg, Virginia. In early 1990, as a followon, a NASA wide Strategic Avionics Technology Working Group was chartered by NASA Headquarters. This paper will describe the objectives of this working group, technology bridging, and approaches to incentivize both the federal and commercial sectors to move toward rapidly developed, simple, and reliable systems with low life cycle cost.

Bridging the triple divide: performance and innovative multimedia in the service of behavioural health change in remote Indigenous settings.

PubMed

Hunter, Ernest; Travers, Helen; Gibson, Julie; Campion, Jonathan

2007-01-01

The use of innovative information technology is now well established in health. However, while the gap in health status between Indigenous and other Australians is both significant and unchanging, there is limited application of these new approaches to addressing this national health priority. This may in part reflect the 'digital divide', which is another facet of Indigenous disadvantage. This paper describes an approach to address both issues in remote Indigenous settings. The Health Interactive Technology Network began as a proof-of-concept study of touchscreen technology in two Indigenous health settings. It has subsequently expanded to a number of remote Indigenous communities and developed new platforms and applications to respond to emerging health issues. In creating narrative, interactive approaches to address choices in relation to health behaviours, the community development and engagement effects of the creative process have been highlighted. These findings suggest that these approaches will be suited to further expansion in the area of mental health.

Public Health Platforms: An Emerging Informatics Approach to Health Professional Learning and Development

PubMed Central

Gray, Kathleen

2016-01-01

Health informatics has a major role to play in optimising the management and use of data, information and knowledge in health systems. As health systems undergo digital transformation, it is important to consider informatics approaches not only to curriculum content but also to the design of learning environments and learning activities for health professional learning and development. An example of such an informatics approach is the use of large-scale, integrated public health platforms on the Internet as part of health professional learning and development. This article describes selected examples of such platforms, with a focus on how they may influence the direction of health professional learning and development. Significance for public health The landscape of healthcare systems, public health systems, health research systems and professional education systems is fragmented, with many gaps and silos. More sophistication in the management of health data, information, and knowledge, based on public health informatics expertise, is needed to tackle key issues of prevention, promotion and policy-making. Platform technologies represent an emerging large-scale, highly integrated informatics approach to public health, combining the technologies of Internet, the web, the cloud, social technologies, remote sensing and/or mobile apps into an online infrastructure that can allow more synergies in work within and across these systems. Health professional curricula need updating so that the health workforce has a deep and critical understanding of the way that platform technologies are becoming the foundation of the health sector. PMID:27190977

Development Approach of the Advanced Life Support On-line Project Information System

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, John A.; Morrow, Rich; Ho, Michael C.; Kaehms, Bob; Cavazzoni, Jim; Brodbeck, Christina A.; Whitaker, Dawn R.

2005-01-01

The Advanced Life Support (ALS) Program has recently accelerated an effort to develop an On-line Project Information System (OPIS) for research project and technology development data centralization and sharing. There has been significant advancement in the On-line Project Information System (OPIS) over the past year (Hogan et al, 2004). This paper presents the resultant OPIS development approach. OPIS is being built as an application framework consisting of an uderlying Linux/Apache/MySQL/PHP (LAMP) stack, and supporting class libraries that provides database abstraction and automatic code generation, simplifying the ongoing development and maintenance process. Such a development approach allows for quick adaptation to serve multiple Programs, although initial deployment is for an ALS module. OPIS core functionality will involve a Web-based annual solicitation of project and technology data directly from ALS Principal Investigators (PIs) through customized data collection forms. Data provided by PIs will be reviewed by a Technical Task Monitor (TTM) before posting the information to OPIS for ALS Community viewing via the Web. Such Annual Reports will be permanent, citable references within OPIS. OPlS core functionality will also include Project Home Sites, which will allow PIS to provide updated technology information to the Community in between Annual Report updates. All data will be stored in an object-oriented relational database, created in MySQL(Reistered Trademark) and located on a secure server at NASA Ames Research Center (ARC). Upon launch, OPlS can be utilized by Managers to identify research and technology development (R&TD) gaps and to assess task performance. Analysts can employ OPlS to obtain the current, comprehensive, accurate information about advanced technologies that is required to perform trade studies of various life support system options. ALS researchers and technology developers can use OPlS to achieve an improved understanding of the NASA and ALS Program needs and to understand how other researchers and technology developers are addressing those needs. OPlS core functionality will launch for 'Ihe ALS Program in October, 2005. However, the system has been developed with the ability to evolve with Program needs. Because of open-source construction, software costs are minimized. Any functionality that is technologically feasible can be built into OPIS, and OPlS can expand through module cloning and adaptation, to any level deemed useful to the Agency.

A Concurrent Product-Development Approach for Friction-Stir Welded Vehicle-Underbody Structures

NASA Astrophysics Data System (ADS)

Grujicic, M.; Arakere, G.; Hariharan, A.; Pandurangan, B.

2012-04-01

High-strength aluminum and titanium alloys with superior blast/ballistic resistance against armor piercing (AP) threats and with high vehicle light-weighing potential are being increasingly used as military-vehicle armor. Due to the complex structure of these vehicles, they are commonly constructed through joining (mainly welding) of the individual components. Unfortunately, these alloys are not very amenable to conventional fusion-based welding technologies [e.g., gas metal arc welding (GMAW)] and to obtain high-quality welds, solid-state joining technologies such as friction-stir welding (FSW) have to be employed. However, since FSW is a relatively new and fairly complex joining technology, its introduction into advanced military-vehicle-underbody structures is not straight forward and entails a comprehensive multi-prong approach which addresses concurrently and interactively all the aspects associated with the components/vehicle-underbody design, fabrication, and testing. One such approach is developed and applied in this study. The approach consists of a number of well-defined steps taking place concurrently and relies on two-way interactions between various steps. The approach is critically assessed using a strengths, weaknesses, opportunities, and threats (SWOT) analysis.

Development of a tissue-specific ribosome profiling approach in Drosophila enables genome-wide evaluation of translational adaptations

PubMed Central

2017-01-01

Recent advances in next-generation sequencing approaches have revolutionized our understanding of transcriptional expression in diverse systems. However, measurements of transcription do not necessarily reflect gene translation, the process of ultimate importance in understanding cellular function. To circumvent this limitation, biochemical tagging of ribosome subunits to isolate ribosome-associated mRNA has been developed. However, this approach, called TRAP, lacks quantitative resolution compared to a superior technology, ribosome profiling. Here, we report the development of an optimized ribosome profiling approach in Drosophila. We first demonstrate successful ribosome profiling from a specific tissue, larval muscle, with enhanced resolution compared to conventional TRAP approaches. We next validate the ability of this technology to define genome-wide translational regulation. This technology is leveraged to test the relative contributions of transcriptional and translational mechanisms in the postsynaptic muscle that orchestrate the retrograde control of presynaptic function at the neuromuscular junction. Surprisingly, we find no evidence that significant changes in the transcription or translation of specific genes are necessary to enable retrograde homeostatic signaling, implying that post-translational mechanisms ultimately gate instructive retrograde communication. Finally, we show that a global increase in translation induces adaptive responses in both transcription and translation of protein chaperones and degradation factors to promote cellular proteostasis. Together, this development and validation of tissue-specific ribosome profiling enables sensitive and specific analysis of translation in Drosophila. PMID:29194454

Law of Large Numbers: The Theory, Applications and Technology-Based Education

ERIC Educational Resources Information Center

Dinov, Ivo D.; Christou, Nicolas; Gould, Robert

2009-01-01

Modern approaches for technology-based blended education utilize a variety of recently developed novel pedagogical, computational and network resources. Such attempts employ technology to deliver integrated, dynamically-linked, interactive-content and heterogeneous learning environments, which may improve student comprehension and information…

Applications in Educational Assessment: Future Technologies.

ERIC Educational Resources Information Center

Bank Street Coll. of Education, New York, NY. Center for Children and Technology.

The development of improved and alternative methods of educational assessment should take advantage of technologies that enable different aspects of learning, teaching, and student achievement to be part of an improved assessment system. The current understanding of knowledge assessment, new approaches to assessment, and technologies that may…

An Approach to Folksonomy-Based Ontology Maintenance for Learning Environments

ERIC Educational Resources Information Center

Gasevic, D.; Zouaq, Amal; Torniai, Carlo; Jovanovic, J.; Hatala, Marek

2011-01-01

Recent research in learning technologies has demonstrated many promising contributions from the use of ontologies and semantic web technologies for the development of advanced learning environments. In spite of those benefits, ontology development and maintenance remain the key research challenges to be solved before ontology-enhanced learning…

A Fifteen-Year Forecast of Information-Processing Technology. Final Report.

ERIC Educational Resources Information Center

Bernstein, George B.

This study developed a variation of the DELPHI approach, a polling technique for systematically soliciting opinions from experts, to produce a technological forecast of developments in the information-processing industry. SEER (System for Event Evaluation and Review) combines the more desirable elements of existing techniques: (1) intuitive…

A Domain Specific Modeling Approach for Coordinating User-Centric Communication Services

ERIC Educational Resources Information Center

Wu, Yali

2011-01-01

Rapid advances in electronic communication devices and technologies have resulted in a shift in the way communication applications are being developed. These new development strategies provide abstract views of the underlying communication technologies and lead to the so-called "user-centric communication applications." One user-centric…

The Development of Technology for Higher Education Institution's Administrative Personnel Assessment

ERIC Educational Resources Information Center

Bakhtina, Olga Yurevna; Kirillov, Andrey Vladimirovich; Matyash, Sergey Askoldovich; Urzha, Olga Aleksandrovna

2015-01-01

The main approaches for development of assessment technology of higher education institution's administrative personnel are considered in this article. Alongside with it the following is defined: purposes, formation principles, indicators and criteria of the assessment system, rating scale, the procedure and order of assessment process of higher…

The Role of New Technologies to Foster Positive Youth Development

ERIC Educational Resources Information Center

Bers, Marina Umaschi

2006-01-01

This article describes a developmental systems approach to applied developmental science (ADS), which provides a framework to design and evaluate technology-rich programs that promote positive development by emphasizing the strengths and assets of young people instead of focusing on diminishing or preventing risk-taking behaviors. Until now, most…

Evaluating the Design and Development of an Adaptive E-Tutorial Module: A Rasch-Measurement Approach

ERIC Educational Resources Information Center

Barefah, Allaa; McKay, Elspeth

2016-01-01

Courseware designers aim to innovate information communications technology (ICT) tools to increase learning experiences, spending many hours developing eLearning programmes. This effort gives rise to a dynamic technological pedagogical environment. However, it is difficult to recognise whether these online programmes reflect an instructional…

Facilitating Integrated Agricultural Technology Development through Participatory Research

ERIC Educational Resources Information Center

Otte, Pia Piroschka; Bernardo, Ricardo; Phinney, Randi; Davidsson, Henrik; Tivana, Lucas Daniel

2018-01-01

Purpose: In this paper, we discuss the role of participatory research in integrated agricultural technology development using the example of a solar fruit drying project in Mozambique.Design/Methodology/Approach: We engage in seven participatory exercises with groups of farmers from two farmers' associations in Inharrime district in Mozambique to…

Effectiveness of Technology Professional Development in Elementary Classrooms

ERIC Educational Resources Information Center

Rives, Megan Bambalis

2012-01-01

The purpose of this mixed methods research study was to examine the effectiveness of a professional development approach in increasing the knowledge and use of instructional technology in the classrooms of elementary teachers. The participants were comprised of 14 elementary teachers in a rural public education school district in the southeastern…

Can genomics deliver climate-change ready crops?

PubMed

Varshney, Rajeev K; Singh, Vikas K; Kumar, Arvind; Powell, Wayne; Sorrells, Mark E

2018-04-20

Development of climate resilient crops with accelerating genetic gains in crops will require integration of different disciplines/technologies, to see the impact in the farmer's field. In this review, we summarize how we are utilizing our germplasm collections to identify superior alleles/haplotypes through NGS based sequencing approaches and how genomics-enabled technologies together with precise phenotyping are being used in crop breeding. Pre-breeding and genomics-assisted breeding approaches are contributing to the more efficient development of climate-resilient crops. It is anticipated that the integration of several disciplines/technologies will result in the delivery of climate change ready crops in less time. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Structures, Material and Processes Technology in the Future Launchers Preparatory Program

NASA Astrophysics Data System (ADS)

Baiocco, P.; Ramusat, G.; Breteau, J.; Bouilly, Th.; Lavelle, Fl.; Cardone, T.; Fischer, H.; Appel, S.; Block, U.

2014-06-01

In the frame of the technology / demonstration activity for European launchers developments and evolutions, a top-down / bottom-up approach has been employed to identify promising technologies and alternative conception. The top-down approach consists in looking for system-driven design solutions and the bottom-up approach features design solutions leading to substantial advantages for the system. The main investigations have been devoted to structures, material and process technology.Preliminary specifications have been used in order to permit sub-system design with the goal to find the major benefit for the overall launch system. In this respect competitiveness factors have been defined to down- select the technology and the corresponding optimized design. The development cost, non-recurring cost, industrialization and operational aspects have been considered for the identification of the most interesting solutions. The TRL/IRL has been assessed depending on the manufacturing company and a preliminary development plan has been issued for some technology.The reference launch systems for the technology and demonstration programs are mainly Ariane 6 with its evolutions, VEGA C/E and others possible longer term systems. Requirements and reference structures architectures have been considered in order to state requirements for representative subscale or full scale demonstrators. The major sub-systems and structures analyzed are for instance the upper stage structures, the engine thrust frame (ETF), the inter stage structures (ISS), the cryogenic propellant tanks, the feeding lines and their attachments, the pressurization systems, the payload adapters and fairings. A specific analysis has been devoted to the efficiency of production processes associated to technologies and design features.The paper provides an overview of the main results of the technology and demonstration activities with the associated system benefits. The materials used for the main structures are metallic and composite owing to sub-systems or sub-assemblies proposed for the European launch systems in development and their evolutions.

Ethylene Control Technologies in Extending Postharvest Shelf Life of Climacteric Fruit.

PubMed

Zhang, Junhua; Cheng, Dong; Wang, Baobin; Khan, Iqbal; Ni, Yonghao

2017-08-30

Fresh fruit is important for a healthy diet. However, because of their seasonal production, regional specific cultivation, and perishable nature, it is essential to develop preservation technologies to extend the postharvest shelf life of fresh fruits. Climacteric fruit adopt spoilage because of ethylene, a key hormone associated with the ripening process. Therefore, controlling ethylene activity by following safe and effective approaches is a key to extend the postharvest shelf life of fruit. In this review, ethylene control technologies will be discussed aiming for the need of developing more innovative and effective approaches. The biosynthesis pathway will be given first. Then, the technologies determining the postharvest shelf life of climacteric fruit will be described with special attention to the latest and significant published works in this field. Special attention is given to 1-methylcyclopropene (1-MCP), which is effective in fruit preservation technologies. Finally, the encapsulation technology to improve the stability of 1-MCP will be proposed, using a potential encapsulation agent of 1-MCP, calixarene.

TESTING INDOOR AIR PRODUCTS: ONE APPROACH TO DEVELOPING WIDELY ACCEPTED PROTOCOLS

EPA Science Inventory

The paper describes an approach to developing widely acce ted products for testing indoor air products. [NOTE: Research Triangle Institute (RTI) is a partner in the U.S. Environmental Protection Agency's (EPA's) Environmental Technology Verification (ETV) Program with responsibil...

Introduction to the Transference of High Technology Systems. An Intercultural Approach.

ERIC Educational Resources Information Center

Norton, Kent; And Others

A training program for upper-middle to upper-level managers of a company in Iran uses the lecture/seminar approach. The goals of the course are to develop insights into problem areas connected with the development of a pragmatic intercultural management model, and to introduce approaches and prerequisites for modern management. The 10 lectures…

Transformative Learning-Based Mentoring for Professional Development of Teacher Educators in Information and Communication Technologies: An Approach for an Emerging Country

ERIC Educational Resources Information Center

Kabakci, Isil; Odabasi, H. Ferhan; Kilicer, Kerem

2010-01-01

Teacher educators need professional development in effective use of information and communication technologies (ICT) in order to keep up with the changes and developments in ICT and to pose as a model for teacher candidates. For the purpose of meeting teacher educators' professional development needs in ICT, it is necessary to take…

New Technological Platform for the National Nuclear Energy Strategy Development

NASA Astrophysics Data System (ADS)

Adamov, E. O.; Rachkov, V. I.

2017-12-01

The paper considers the need to update the development strategy of Russia's nuclear power industry and various approaches to the large-scale nuclear power development. Problems of making decisions on fast neutron reactors and closed nuclear fuel cycle (NFC) arrangement are discussed. The current state of the development of fast neutron reactors and closed NFC technologies in Russia is considered and major problems are highlighted.

Enabling Venus In-Situ Science - Deployable Entry System Technology, Adaptive Deployable Entry and Placement Technology (ADEPT): A Technology Development Project funded by Game Changing Development Program of the Space Technology Program

NASA Technical Reports Server (NTRS)

Wercinski, Paul F.; Venkatapathy, Ethiraj; Gage, Peter J.; Yount, Bryan C.; Prabhu, Dinesh K.; Smith, Brandon; Arnold, James O.; Makino, alberto; Peterson, Keith Hoppe; Chinnapongse, Ronald I.

2012-01-01

Venus is one of the important planetary destinations for scientific exploration, but: The combination of extreme entry environment coupled with extreme surface conditions have made mission planning and proposal efforts very challenging. We present an alternate, game-changing approach (ADEPT) where a novel entry system architecture enables more benign entry conditions and this allows for greater flexibility and lower risk in mission design

'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Emerging technologies for the changing global market

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semi-quantative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Introducing new technologies into Space Station subsystems

NASA Technical Reports Server (NTRS)

Wiskerchen, Michael J.; Mollakarimi, Cindy L.

1989-01-01

A new systems engineering technology has been developed and applied to Shuttle processing. The new engineering approach emphasizes the identification, quantitative assessment, and management of system performance and risk related to the dynamic nature of requirements, technology, and operational concepts. The Space Shuttle Tile Automation System is described as an example of the first application of the new engineering technology. Lessons learned from the Shuttle processing experience are examined, and concepts are presented which are applicable to the design and development of the Space Station Freedom.

The NASA technology push towards future space mission systems

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.; Povinelli, Frederick P.; Rosen, Robert

1988-01-01

As a result of the new Space Policy, the NASA technology program has been called upon to a provide a solid base of national capabilities and talent to serve NASA's civil space program, commercial, and other space sector interests. This paper describes the new technology program structure and its characteristics, traces its origin and evolution, and projects the likely near- and far-term strategic steps. It addresses the alternative 'push-pull' approaches to technology development, the readiness levels to which the technology needs to be developed for effective technology transfer, and the focused technology programs currently being implemented to satisfy the needs of future space systems.

Plasma technology - a novel solution for CO2 conversion?

PubMed

Snoeckx, Ramses; Bogaerts, Annemie

2017-10-02

CO 2 conversion into value-added chemicals and fuels is considered as one of the great challenges of the 21st century. Due to the limitations of the traditional thermal approaches, several novel technologies are being developed. One promising approach in this field, which has received little attention to date, is plasma technology. Its advantages include mild operating conditions, easy upscaling, and gas activation by energetic electrons instead of heat. This allows thermodynamically difficult reactions, such as CO 2 splitting and the dry reformation of methane, to occur with reasonable energy cost. In this review, after exploring the traditional thermal approaches, we have provided a brief overview of the fierce competition between various novel approaches in a quest to find the most effective and efficient CO 2 conversion technology. This is needed to critically assess whether plasma technology can be successful in an already crowded arena. The following questions need to be answered in this regard: are there key advantages to using plasma technology over other novel approaches, and if so, what is the flip side to the use of this technology? Can plasma technology be successful on its own, or can synergies be achieved by combining it with other technologies? To answer these specific questions and to evaluate the potentials and limitations of plasma technology in general, this review presents the current state-of-the-art and a critical assessment of plasma-based CO 2 conversion, as well as the future challenges for its practical implementation.

Transfer and Use of Training Technology: A Model for Matching Training Approaches with Training Settings. Technical Report No. 74-24.

ERIC Educational Resources Information Center

Haverland, Edgar M.

The report describes a project designed to facilitate the transfer and utilization of training technology by developing a model for evaluating training approaches or innovtions in relation to the requirements, resources, and constraints of specific training settings. The model consists of two parallel sets of open-ended questions--one set…

A Grounded Theory Approach to the Development of a Framework for Researching Children's Decision-Making Skills within Design and Technology Education

ERIC Educational Resources Information Center

Mettas, Alexandros; Norman, Eddie

2011-01-01

This paper discusses the establishment of a framework for researching children's decision-making skills in design and technology education through taking a grounded theory approach. Three data sources were used: (1) analysis of available literature; (2) curriculum analysis and interviews with teachers concerning their practice in relation to their…

Combining Drama Pedagogy with Digital Technologies to Support the Language Learning Needs of Newly Arrived Refugee Children: A Classroom Case Study

ERIC Educational Resources Information Center

Dunn, Julie; Bundy, Penny; Woodrow, Nina

2012-01-01

Although significant research has been completed that examines the effectiveness of process drama as a pedagogical approach for developing additional languages and further work has focused on the affordances of digital technologies within drama work, scant attention has been paid to the possibilities which a combination of these approaches might…

Toward a Concept of Operations for Aviation Weather Information Implementation in the Evolving National Airspace System

NASA Technical Reports Server (NTRS)

McAdaragh, Raymon M.

2002-01-01

The capacity of the National Airspace System is being stressed due to the limits of current technologies. Because of this, the FAA and NASA are working to develop new technologies to increase the system's capacity which enhancing safety. Adverse weather has been determined to be a major factor in aircraft accidents and fatalities and the FAA and NASA have developed programs to improve aviation weather information technologies and communications for system users The Aviation Weather Information Element of the Weather Accident Prevention Project of NASA's Aviation Safety Program is currently working to develop these technologies in coordination with the FAA and industry. This paper sets forth a theoretical approach to implement these new technologies while addressing the National Airspace System (NAS) as an evolving system with Weather Information as one of its subSystems. With this approach in place, system users will be able to acquire the type of weather information that is needed based upon the type of decision-making situation and condition that is encountered. The theoretical approach addressed in this paper takes the form of a model for weather information implementation. This model addresses the use of weather information in three decision-making situations, based upon the system user's operational perspective. The model also addresses two decision-making conditions, which are based upon the need for collaboration due to the level of support offered by the weather information provided by each new product or technology. The model is proposed for use in weather information implementation in order to provide a systems approach to the NAS. Enhancements to the NAS collaborative decision-making capabilities are also suggested.

Energy efficient engine. Volume 2. Appendix A: Component development and integration program

NASA Technical Reports Server (NTRS)

Moracz, D. J.; Cook, C. R.

1981-01-01

The large size and the requirement for precise lightening cavities in a considerable portion of the titanium fan blades necessitated the development of a new manufacturing method. The approach which was selected for development incorporated several technologies including HIP diffusion bonding of titanium sheet laminates containing removable cores and isothermal forging of the blade form. The technology bases established in HIP/DB for composite blades and in isothermal forging for fan blades were applicable for development of the manufacturing process. The process techniques and parameters for producing and inspecting the cored diffusion bonded titanium laminate blade preform were established. The method was demonstrated with the production of twelve hollow simulated blade shapes for evaluation. Evaluations of the critical experiments conducted to establish procedures to produce hollow structures by a laminate/core/diffusion bonding approach are included. In addition the transfer of this technology to produce a hollow fan blade is discussed.

Strategies for safe injections.

PubMed Central

Battersby, A.; Feilden, R.; Stoeckel, P.; Da Silva, A.; Nelson, C.; Bass, A.

1999-01-01

In 1998, faced with growing international concern, WHO set out an approach for achieving injection safety that encompassed all elements from patients' expectations and doctors' prescribing habits to waste disposal. This article follows that lead and describes the implications of the approach for two injection technologies: sterilizable and disposable. It argues that focusing on any single technology diverts attention from the more fundamental need for health services to develop their own comprehensive strategies for safe injections. National health authorities will only be able to ensure that injections are administered safely if they take an approach that encompasses the whole system, and choose injection technologies that fit their circumstances. PMID:10680247

Reaching Mars: multi-criteria R&D portfolio selection for Mars exploration technology planning

NASA Technical Reports Server (NTRS)

Smith, J. H.; Dolgin, B. P.; Weisbin, C. R.

2003-01-01

The exploration of Mars has been the focus of increasing scientific interest about the planet and its relationship to Earth. A multi-criteria decision-making approach was developed to address the question, Given a Mars program composed of mission concepts dependent on a variety of alternative technology development programs, which combination of technologies would enable missions to maximize science return under a constrained budget?.

Open Technology Approaches to Geospatial Interface Design

NASA Astrophysics Data System (ADS)

Crevensten, B.; Simmons, D.; Alaska Satellite Facility

2011-12-01

What problems do you not want your software developers to be solving? Choosing open technologies across the entire stack of software development-from low-level shared libraries to high-level user interaction implementations-is a way to help ensure that customized software yields innovative and valuable tools for Earth Scientists. This demonstration will review developments in web application technologies and the recurring patterns of interaction design regarding exploration and discovery of geospatial data through the Vertex: ASF's Dataportal interface, a project utilizing current open web application standards and technologies including HTML5, jQueryUI, Backbone.js and the Jasmine unit testing framework.

Guiding tissue regeneration with ultrasound in vitro and in vivo

NASA Astrophysics Data System (ADS)

Dalecki, Diane; Comeau, Eric S.; Raeman, Carol H.; Child, Sally Z.; Hobbs, Laura; Hocking, Denise C.

2015-05-01

Developing new technologies that enable the repair or replacement of injured or diseased tissues is a major focus of regenerative medicine. This paper will discuss three ultrasound technologies under development in our laboratories to guide tissue regeneration both in vitro and in vivo. A critical obstacle in tissue engineering is the need for rapid and effective tissue vascularization strategies. To address this challenge, we are developing acoustic patterning techniques for microvascular tissue engineering. Acoustic radiation forces associated with ultrasound standing wave fields provide a rapid, non-invasive approach to spatially pattern cells in three dimensions without affecting cell viability. Acoustic patterning of endothelial cells leads to the rapid formation of microvascular networks throughout the volumes of three-dimensional hydrogels, and the morphology of the resultant microvessel networks can be controlled by design of the ultrasound field. A second technology under development uses ultrasound to noninvasively control the microstructure of collagen fibers within engineered tissues. The microstructure of extracellular matrix proteins provides signals that direct cell functions critical to tissue regeneration. Thus, controlling collagen microfiber structure with ultrasound provides a noninvasive approach to regulate the mechanical properties of biomaterials and control cellular responses. The third technology employs therapeutic ultrasound to enhance the healing of chronic wounds. Recent studies demonstrate increased granulation tissue thickness and collagen deposition in murine dermal wounds exposed to pulsed ultrasound. In summary, ultrasound technologies offer noninvasive approaches to control cell behaviors and extracellular matrix organization and thus hold great promise to advance tissue regeneration in vitro and in vivo.

Generalized approach for identification and evaluation of technology-insertion options for military avionics systems

NASA Astrophysics Data System (ADS)

Harkness, Linda L.; Sjoberg, Eric S.

1996-06-01

The Georgia Tech Research Institute, sponsored by the Warner Robins Air Logistics Center, has developed an approach for efficiently postulating and evaluating methods for extending the life of radars and other avionics systems. The technique identified specific assemblies for potential replacement and evaluates the system level impact, including performance, reliability and life-cycle cost of each action. The initial impetus for this research was the increasing obsolescence of integrated circuits contained in the AN/APG-63 system. The operational life of military electronics is typically in excess of twenty years, which encompasses several generations of IC technology. GTRI has developed a systems approach to inserting modern technology components into older systems based upon identification of those functions which limit the system's performance or reliability and which are cost drivers. The presentation will discuss the above methodology and a technique for evaluating and ranking the different potential system upgrade options.

Streaming Media Technology: Laying the Foundations for Educational Change.

ERIC Educational Resources Information Center

Sircar, Jayanta

2000-01-01

Discussion of the delivery of multimedia using streaming technology focuses on its use in engineering education. Highlights include engineering education and instructional technology, including learning approaches based on cognitive development; differences between local and distance education; economic factors; and roles of Web-based streaming,…

Technological Literacy: A Multiliteracies Approach for Democracy

ERIC Educational Resources Information Center

Williams, P. John

2009-01-01

Throughout history various grand narratives have impacted on technology education. In the current post modern era of globalization, technology education continues to struggle for relevance and definition, and takes various forms in different countries, but none seem resoundingly successful. The current development of what some have termed a…

Improving NASA's technology for space science

NASA Technical Reports Server (NTRS)

1993-01-01

The continued advance of the nation's space program is directly dependent upon the development and use of new technology. Technology is the foundation for every aspect of space missions and ground operations. The improvements in technology that will enable future advances are not only in device and system performance, but also in permitting missions to be carried out more rapidly and at lower cost. Although more can be done with current technology, NASA's recent call for new and innovative approaches should not be answered by employing only today's technologies; new technologies with revolutionary potential should be sought. The study reported here was performed to identify means to enhance the development of technologies for the space sciences and applications.

Digital Storytelling: A Meaningful Technology-Integrated Approach for Engaged Student Learning

ERIC Educational Resources Information Center

Sadik, Alaa

2008-01-01

Although research emphasizes the importance of integrating technology into the curriculum, the use of technology can only be effective if teachers themselves possess the expertise to use technology in a meaningful way in the classroom. The aim of this study was to assist Egyptian teachers in developing teaching and learning through the application…

Wikipedia use: Risk for developing technology addiction.

PubMed

Sharma, Manoj Kumar

2016-01-01

The present case highlights the addictive potential of Wikipedia usage. The users approached a technology addiction clinic for the management of excessive use of technology. A clinical interview was used to elicit information about usages. It indicates the addictive use of Wikipedia and associated dysfunction in lifestyle. It has implication for promotion of healthy use of technology.

Applying Digital Sensor Technology: A Problem-Solving Approach

ERIC Educational Resources Information Center

Seedhouse, Paul; Knight, Dawn

2016-01-01

There is currently an explosion in the number and range of new devices coming onto the technology market that use digital sensor technology to track aspects of human behaviour. In this article, we present and exemplify a three-stage model for the application of digital sensor technology in applied linguistics that we have developed, namely,…

Space Station Engineering and Technology Development

NASA Technical Reports Server (NTRS)

1985-01-01

The evolving space station program will be examined through a series of more specific studies: maintainability; research and technology in space; solar thermodynamics research and technology; program performance; onboard command and control; and research and technology road maps. The purpose is to provide comments on approaches to long-term, reliable operation at low cost in terms of funds and crew time.

Improving early cycle economic evaluation of diagnostic technologies.

PubMed

Steuten, Lotte M G; Ramsey, Scott D

2014-08-01

The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

Post-genomic science: cross-disciplinary and large-scale collaborative research and its organizational and technological challenges for the scientific research process.

PubMed

Welsh, Elaine; Jirotka, Marina; Gavaghan, David

2006-06-15

We examine recent developments in cross-disciplinary science and contend that a 'Big Science' approach is increasingly evident in the life sciences-facilitated by a breakdown of the traditional barriers between academic disciplines and the application of technologies across these disciplines. The first fruits of 'Big Biology' are beginning to be seen in, for example, genomics, (bio)-nanotechnology and systems biology. We suggest that this has profound implications for the research process and presents challenges both in technological design, in the provision of infrastructure and training, in the organization of research groups, and in providing suitable research funding mechanisms and reward systems. These challenges need to be addressed if the promise of this approach is to be fully realized. In this paper, we will draw on the work of social scientists to understand how these developments in science and technology relate to organizational culture, organizational change and the context of scientific work. We seek to learn from previous technological developments that seemed to offer similar potential for organizational and social change.

The PartoPen: Using Digital Pen Technology to Improve Maternal Labor Monitoring in the Developing World

ERIC Educational Resources Information Center

Underwood, Heather Marie

2013-01-01

This dissertation presents the PartoPen, a new approach to addressing maternal labor monitoring challenges in developing countries. The PartoPen is a hardware and software system that uses digital pen technology to enhance, rather than replace, the paper-based labor monitoring tool known as the partograph. In the developing world, correct use of…

The Development, Validity and Reliability of TPACK-Deep: A Technological Pedagogical Content Knowledge Scale

ERIC Educational Resources Information Center

Yurdakul, Isil Kabakci; Odabasi, Hatice Ferhan; Kilicer, Kerem; Coklar, Ahmet Naci; Birinci, Gurkay; Kurt, Adile Askim

2012-01-01

The purpose of this study is to develop a TPACK (technological pedagogical content knowledge) scale based on the centered component of TPACK framework in order to measure preservice teachers' TPACK. A systematic and step-by-step approach was followed for the development of the scale. The validity and reliability studies of the scale were carried…

Emergence of telerobotic control enhancement from research in machine autonomy

NASA Astrophysics Data System (ADS)

Haddad, Albert G., Sr.; Adams, John C.; Berardo, Peter A.; Ohlund, Kent O.; Van Vactor, David L.

1992-03-01

This paper provides a description of the Robotic Research Program being conducted at the Lockheed Research and Development Division Laboratories. It details the approach taken to fuse autonomy with teleoperative control. The component/enabling technologies are defined and the status of the development of those technologies is reported. CASE tools used in an accelerated development environment are identified and discussed.

Actor Diversity and Interactions in the Development of Banana Hybrid Varieties in Uganda: Implications for Technology Uptake

ERIC Educational Resources Information Center

Sanya, Losira Nasirumbi; Sseguya, Haroon; Kyazze, Florence Birungi; Baguma, Yona; Kibwika, Paul

2018-01-01

Purpose: We examine the nature of networks through which new hybrid banana varieties (HBVs) in Uganda are developed, and how different actors engage in the technology development process. Design/methodology/approach: We collected the data through 20 key informant interviews and 5 focus group discussions with actors involved in the process. We…

High performance dielectric materials development

NASA Technical Reports Server (NTRS)

Piche, Joe; Kirchner, Ted; Jayaraj, K.

1994-01-01

The mission of polymer composites materials technology is to develop materials and processing technology to meet DoD and commercial needs. The following are outlined in this presentation: high performance capacitors, high temperature aerospace insulation, rationale for choosing Foster-Miller (the reporting industry), the approach to the development and evaluation of high temperature insulation materials, and the requirements/evaluation parameters. Supporting tables and diagrams are included.

High performance dielectric materials development

NASA Astrophysics Data System (ADS)

Piche, Joe; Kirchner, Ted; Jayaraj, K.

1994-09-01

The mission of polymer composites materials technology is to develop materials and processing technology to meet DoD and commercial needs. The following are outlined in this presentation: high performance capacitors, high temperature aerospace insulation, rationale for choosing Foster-Miller (the reporting industry), the approach to the development and evaluation of high temperature insulation materials, and the requirements/evaluation parameters. Supporting tables and diagrams are included.

Remediation approaches for polycyclic aromatic hydrocarbons (PAHs) contaminated soils: Technological constraints, emerging trends and future directions.

PubMed

Kuppusamy, Saranya; Thavamani, Palanisami; Venkateswarlu, Kadiyala; Lee, Yong Bok; Naidu, Ravi; Megharaj, Mallavarapu

2017-02-01

For more than a decade, the primary focus of environmental experts has been to adopt risk-based management approaches to cleanup PAH polluted sites that pose potentially destructive ecological consequences. This focus had led to the development of several physical, chemical, thermal and biological technologies that are widely implementable. Established remedial options available for treating PAH contaminated soils are incineration, thermal conduction, solvent extraction/soil washing, chemical oxidation, bioaugmentation, biostimulation, phytoremediation, composting/biopiles and bioreactors. Integrating physico-chemical and biological technologies is also widely practiced for better cleanup of PAH contaminated soils. Electrokinetic remediation, vermiremediation and biocatalyst assisted remediation are still at the development stage. Though several treatment methods to remediate PAH polluted soils currently exist, a comprehensive overview of all the available remediation technologies to date is necessary so that the right technology for field-level success is chosen. The objective of this review is to provide a critical overview in this respect, focusing only on the treatment options available for field soils and ignoring the spiked ones. The authors also propose the development of novel multifunctional green and sustainable systems like mixed cell culture system, biosurfactant flushing, transgenic approaches and nanoremediation in order to overcome the existing soil- contaminant- and microbial-associated technological limitations in tackling high molecular weight PAHs. The ultimate objective is to ensure the successful remediation of long-term PAH contaminated soils. Copyright © 2016 Elsevier Ltd. All rights reserved.

Utilization of the Building-Block Approach in Structural Mechanics Research

NASA Technical Reports Server (NTRS)

Rouse, Marshall; Jegley, Dawn C.; McGowan, David M.; Bush, Harold G.; Waters, W. Allen

2005-01-01

In the last 20 years NASA has worked in collaboration with industry to develop enabling technologies needed to make aircraft safer and more affordable, extend their lifetime, improve their reliability, better understand their behavior, and reduce their weight. To support these efforts, research programs starting with ideas and culminating in full-scale structural testing were conducted at the NASA Langley Research Center. Each program contained development efforts that (a) started with selecting the material system and manufacturing approach; (b) moved on to experimentation and analysis of small samples to characterize the system and quantify behavior in the presence of defects like damage and imperfections; (c) progressed on to examining larger structures to examine buckling behavior, combined loadings, and built-up structures; and (d) finally moved to complicated subcomponents and full-scale components. Each step along the way was supported by detailed analysis, including tool development, to prove that the behavior of these structures was well-understood and predictable. This approach for developing technology became known as the "building-block" approach. In the Advanced Composites Technology Program and the High Speed Research Program the building-block approach was used to develop a true understanding of the response of the structures involved through experimentation and analysis. The philosophy that if the structural response couldn't be accurately predicted, it wasn't really understood, was critical to the progression of these programs. To this end, analytical techniques including closed-form and finite elements were employed and experimentation used to verify assumptions at each step along the way. This paper presents a discussion of the utilization of the building-block approach described previously in structural mechanics research and development programs at NASA Langley Research Center. Specific examples that illustrate the use of this approach are included from recent research and development programs for both subsonic and supersonic transports.

Autonomous rendezvous and capture development infrastructure

NASA Technical Reports Server (NTRS)

Bryan, Thomas C.

1991-01-01

In the development of the technology for autonomous rendezvous and docking, key infrastructure capabilities must be used for effective and economical development. This need involves facility capabilities, both equipment and personnel, to devise, develop, qualify, and integrate ARD elements and subsystems into flight programs. One effective way of reducing technical risks in developing ARD technology is the use of the Low Earth Orbit test facility. Using a reusable free-flying testbed carried in the Shuttle, as a technology demonstration test flight, can be structured to include a variety of sensors, control schemes, and operational approaches. This testbed and flight demonstration concept will be used to illustrate how technologies and facilities at MSFC can be used to develop and prove an ARD system.

Future Issues and Approaches to Health Monitoring and Failure Prevention for Oil-Free Gas Turbines

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher

2004-01-01

Recent technology advances in foil air bearings, high temperature solid lubricants and computer based modeling has enabled the development of small Oil-Free gas turbines. These turbomachines are currently commercialized as small (<100 kW) microturbine generators and larger machines are being developed. Based upon these successes and the high potential payoffs offered by Oil-Free systems, NASA, industry, and other government entities are anticipating Oil-Free gas turbine propulsion systems to proliferate future markets. Since an Oil-Free engine has no oil system, traditional approaches to health monitoring and diagnostics, such as chip detection, oil analysis, and possibly vibration signature analyses (e.g., ball pass frequency) will be unavailable. As such, new approaches will need to be considered. These could include shaft orbit analyses, foil bearing temperature measurements, embedded wear sensors and start-up/coast down speed analysis. In addition, novel, as yet undeveloped techniques may emerge based upon concurrent developments in MEMS technology. This paper introduces Oil-Free technology, reviews the current state of the art and potential for future turbomachinery applications and discusses possible approaches to health monitoring, diagnostics and failure prevention.

Remote Sensing Technologies and Geospatial Modelling Hierarchy for Smart City Support

NASA Astrophysics Data System (ADS)

Popov, M.; Fedorovsky, O.; Stankevich, S.; Filipovich, V.; Khyzhniak, A.; Piestova, I.; Lubskyi, M.; Svideniuk, M.

2017-12-01

The approach to implementing the remote sensing technologies and geospatial modelling for smart city support is presented. The hierarchical structure and basic components of the smart city information support subsystem are considered. Some of the already available useful practical developments are described. These include city land use planning, urban vegetation analysis, thermal condition forecasting, geohazard detection, flooding risk assessment. Remote sensing data fusion approach for comprehensive geospatial analysis is discussed. Long-term city development forecasting by Forrester - Graham system dynamics model is provided over Kiev urban area.

Technical and Sociological Approaches for Curriculum Innovation on Clothing Education Department

NASA Astrophysics Data System (ADS)

Tristantie, N.

2018-02-01

Education in the context of social and technical development is defined as the main factor in the learning process which is implied into curriculum. It needs to be anticipated responsively how the goals of Clothing Education Department should be achieved. The sociological and technological through curriculum innovation at Clothing Education Department aims to gain good profile of the professional graduates in the future. By using the literature study, it is found out that sociological development and technological approach are the main foundation for sustainability of Clothing Education Department.

Project Icarus: Nuclear Fusion Propulsion Concept Comparison

NASA Astrophysics Data System (ADS)

Stanic, M.

Project Icarus will use nuclear fusion as the primary propulsion, since achieving breakeven is imminent within the next decade. Therefore, fusion technology provides confidence in further development and fairly high technological maturity by the time the Icarus mission would be plausible. Currently there are numerous (over 2 dozen) different fusion approaches that are simultaneously being developed around the World and it is difficult to predict which of the concepts is going to be the most successful one. This study tried to estimate current technological maturity and possible technological extrapolation of fusion approaches for which appropriate data could be found. Figures of merit that were assessed include: current technological state, mass and volume estimates, possible gain values, main advantages and disadvantages of the concept and an attempt to extrapolate current technological state for the next decade or two. Analysis suggests that Magnetic Confinement Fusion (MCF) concepts are not likely to deliver sufficient performance due to size, mass, gain and large technological barriers of the concept. However, ICF and PJMIF did show potential for delivering necessary performance, assuming appropriate techno- logical advances. This paper is a submission of the Project Icarus Study Group.

Systems Engineering Applied to the Development of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L.; Costello, Ronan Patrick

A motivation for undertaking this stakeholder requirements analysis and Systems Engineering exercise is to document the requirements for successful wave energy farms to facilitate better design and better design assessments. A difficulty in wave energy technology development is the absence to date of a verifiable minimum viable product against which the merits of new products might be measured. A consequence of this absence is that technology development progress, technology value, and technology funding have largely been measured, associated with, and driven by technology readiness, measured in technology readiness levels (TRLs). Originating primarily from the space and defense industries, TRLs focusmore » on procedural implementation of technology developments of large and complex engineering projects, where cost is neither mission critical nor a key design driver. The key deficiency with the TRL approach in the context of wave energy conversion is that WEC technology development has been too focused on commercial readiness and not enough on the stakeholder requirements and particularly economic viability required for market entry.« less

Technology advancement for integrative stem cell analyses.

PubMed

Jeong, Yoon; Choi, Jonghoon; Lee, Kwan Hyi

2014-12-01

Scientists have endeavored to use stem cells for a variety of applications ranging from basic science research to translational medicine. Population-based characterization of such stem cells, while providing an important foundation to further development, often disregard the heterogeneity inherent among individual constituents within a given population. The population-based analysis and characterization of stem cells and the problems associated with such a blanket approach only underscore the need for the development of new analytical technology. In this article, we review current stem cell analytical technologies, along with the advantages and disadvantages of each, followed by applications of these technologies in the field of stem cells. Furthermore, while recent advances in micro/nano technology have led to a growth in the stem cell analytical field, underlying architectural concepts allow only for a vertical analytical approach, in which different desirable parameters are obtained from multiple individual experiments and there are many technical challenges that limit vertically integrated analytical tools. Therefore, we propose--by introducing a concept of vertical and horizontal approach--that there is the need of adequate methods to the integration of information, such that multiple descriptive parameters from a stem cell can be obtained from a single experiment.

Meeting NASA's Mission Through Commercial Partnerships

NASA Technical Reports Server (NTRS)

Nall, Mark

2003-01-01

This paper examines novel approaches to furthering NASA's missions through the use of commercial partnerships. The exploration of space ha proven to be a costly endeavor requiring the development of new technologies at significant expense. One of the prime factors holding bac the robust development of space is insufficient investment in the technologies necessary to make it a reality. The key to success in bringin needed space development technologies to maturation lies in bringing technology investors together from government, industry and academia. aggressive road map for developing space will require a diverse set of interest to industry or other government agencies. By having each invest( contributing to the part of the technology development of interest to them development of space systems can be put together at a cost far below wl would be required to develop for a stand-alone effort. The NASA Space Partnership Division has been employing this technique to leverage a 30 million dollar NASA investment into at 100 million dollar advanced technology development effort focused on meeting NASA's mission needs.

Towards precision prevention: Technologies for identifying healthy individuals with high risk of disease.

PubMed

Nagel, Zachary D; Engelward, Bevin P; Brenner, David J; Begley, Thomas J; Sobol, Robert W; Bielas, Jason H; Stambrook, Peter J; Wei, Qingyi; Hu, Jennifer J; Terry, Mary Beth; Dilworth, Caroline; McAllister, Kimberly A; Reinlib, Les; Worth, Leroy; Shaughnessy, Daniel T

2017-08-01

The rise of advanced technologies for characterizing human populations at the molecular level, from sequence to function, is shifting disease prevention paradigms toward personalized strategies. Because minimization of adverse outcomes is a key driver for treatment decisions for diseased populations, developing personalized therapy strategies represent an important dimension of both precision medicine and personalized prevention. In this commentary, we highlight recently developed enabling technologies in the field of DNA damage, DNA repair, and mutagenesis. We propose that omics approaches and functional assays can be integrated into population studies that fuse basic, translational and clinical research with commercial expertise in order to accelerate personalized prevention and treatment of cancer and other diseases linked to aberrant responses to DNA damage. This collaborative approach is generally applicable to efforts to develop data-driven, individualized prevention and treatment strategies for other diseases. We also recommend strategies for maximizing the use of biological samples for epidemiological studies, and for applying emerging technologies to clinical applications. Copyright © 2017 Elsevier B.V. All rights reserved.

Towards precision prevention: Technologies for identifying healthy individuals with high risk of disease

PubMed Central

Nagel, Zachary D.; Engelward, Bevin P.; Brenner, David J.; Begley, Thomas J.; Sobol, Robert W.; Bielas, Jason H.; Stambrook, Peter J.; Wei, Qingyi; Hu, Jennifer J.; Terry, Mary Beth; Dilworth, Caroline; McAllister, Kimberly A.; Reinlib, Les; Worth, Leroy; Shaughnessy, Daniel T.

2018-01-01

The rise of advanced technologies for characterizing human populations at the molecular level, from sequence to function, is shifting disease prevention paradigms toward personalized strategies. Because minimization of adverse outcomes is a key driver for treatment decisions for diseased populations, developing personalized therapy strategies represent an important dimension of both precision medicine and personalized prevention. In this commentary, we highlight recently developed enabling technologies in the field of DNA damage, DNA repair, and mutagenesis. We propose that omics approaches and functional assays can be integrated into population studies that fuse basic, translational and clinical research with commercial expertise in order to accelerate personalized prevention and treatment of cancer and other diseases linked to aberrant responses to DNA damage. This collaborative approach is generally applicable to efforts to develop data-driven, individualized prevention and treatment strategies for other diseases. We also recommend strategies for maximizing the use of biological samples for epidemiological studies, and for applying emerging technologies to clinical applications. PMID:28458064

A Programmatic and Engineering Approach to the Development of a Nuclear Thermal Rocket for Space Exploration

NASA Technical Reports Server (NTRS)

Bordelon, Wayne J., Jr.; Ballard, Rick O.; Gerrish, Harold P., Jr.

2006-01-01

With the announcement of the Vision for Space Exploration on January 14, 2004, there has been a renewed interest in nuclear thermal propulsion. Nuclear thermal propulsion is a leading candidate for in-space propulsion for human Mars missions; however, the cost to develop a nuclear thermal rocket engine system is uncertain. Key to determining the engine development cost will be the engine requirements, the technology used in the development and the development approach. The engine requirements and technology selection have not been defined and are awaiting definition of the Mars architecture and vehicle definitions. The paper discusses an engine development approach in light of top-level strategic questions and considerations for nuclear thermal propulsion and provides a suggested approach based on work conducted at the NASA Marshall Space Flight Center to support planning and requirements for the Prometheus Power and Propulsion Office. This work is intended to help support the development of a comprehensive strategy for nuclear thermal propulsion, to help reduce the uncertainty in the development cost estimate, and to help assess the potential value of and need for nuclear thermal propulsion for a human Mars mission.

Photonic technology revolution influence on the defence area

NASA Astrophysics Data System (ADS)

Galas, Jacek; Litwin, Dariusz; Błocki, Narcyz; Daszkiewicz, Marek

2017-10-01

Revolutionary progress in the photonic technology provides the ability to develop military systems of new properties not possible to obtain with the use of classical technologies. In recent years, this progress has resulted in developing advanced, complex, multifunctional and relatively cheap Photonic Integrated Circuits (PIC) or Hybrid Photonics Circuits (HPC) built of a collection of standardized optical, optoelectronic and photonic components. This idea is similar to the technology of Electronic Integrated Circuits, which has revolutionized the microelectronic market. The novel approach to photonic technology is now revolutionizing the photonics' market. It simplifies the photonics technology and enables creation of technological centers for designing, development and production of advanced optical and photonic systems in the EU and other countries. This paper presents some selected photonic technologies and their impact on such defense systems like radars, radiolocation, telecommunication, and radio-communication systems.

New Strategy for Exploration Technology Development: The Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative

NASA Technical Reports Server (NTRS)

Mankins, John C.

2000-01-01

In FY 2001, NASA will undertake a new research and technology program supporting the goals of human exploration: the Human Exploration and Development of Space (HEDS) Exploration/Commercialization Technology Initiative (HTCI). The HTCI represents a new strategic approach to exploration technology, in which an emphasis will be placed on identifying and developing technologies for systems and infrastructures that may be common among exploration and commercial development of space objectives. A family of preliminary strategic research and technology (R&T) road maps have been formulated that address "technology for human exploration and development of space (THREADS). These road maps frame and bound the likely content of the HTCL Notional technology themes for the initiative include: (1) space resources development, (2) space utilities and power, (3) habitation and bioastronautics, (4) space assembly, inspection and maintenance, (5) exploration and expeditions, and (6) space transportation. This paper will summarize the results of the THREADS road mapping process and describe the current status and content of the HTCI within that framework. The paper will highlight the space resources development theme within the Initiative and will summarize plans for the coming year.

Research and Development Limited Partnerships as a Device to Exploit University Owned Technology.

ERIC Educational Resources Information Center

Bartlett, Joseph W.; Siena, James V.

1984-01-01

The research and development limited partnership offers a university a better approach to determining the commercial potential of technology, funding its developmnt, bringing it to market, and maximizing profit without entangling the university in a commercial venture or draining institutional funds. It also has attractive tax benefits for…

Combining Emerging Technology and Writing across the Curriculum: Professional Development that Works!

ERIC Educational Resources Information Center

Hampson, Margaret P.; Hearron, Tom; Noggle, Mary

2009-01-01

Though Writing Across the Curriculum is not a new concept, Caldwell Community College and Technical Institute offers a two-semester professional development program that combines this instructional approach with emerging technology. Though this program focuses on the use of writing to enhance student learning, this training format can be…

SMART NAS Test Bed Overview

NASA Technical Reports Server (NTRS)

Palopo, Kee

2016-01-01

These slides presents an overview of SMART NAS Test Bed. The test bed is envisioned to be connected to operational systems and to allow a new concept and technology to be evaluated in its realistic environment. Its role as an accelerator of concepts and technologies development, its use-case-driven development approach, and its state are presented.

Successful Information and Communication Technology Implementation Strategies for Rural Communities: An Investigation of Tech-Based Economic Development Programs

ERIC Educational Resources Information Center

Sullivan, Donna Annette

2009-01-01

Many rural communities across America face several obstacles in the implementation of information and communication technologies (ICTs) initiatives and struggle with the best approaches for leveraging these elements into an economic development strategy. These obstacles include: lack of quality local ICTs infrastructure, funding, inability to…

Redesigning Professional Development: Reconceptualising Teaching Using Social Learning Technologies

ERIC Educational Resources Information Center

Cochrane, Thomas; Narayan, Vickel

2013-01-01

This article evaluates the use of a community of practice model for redesigning a lecturer professional development course investigating the impact of mobile web 2.0 technologies in higher education. The results show a significant change in lecturer conceptions of pedagogy were achieved by this approach. Drawing on our experience of two iterations…

Online Collaborative Mentoring for Technology Integration in Pre-Service Teacher Education

ERIC Educational Resources Information Center

Dorner, Helga; Kumar, Swapna

2016-01-01

The Mentored Innovation Model is an online collaborative mentoring model developed in Hungary to help teachers integrate technology in their classrooms in meaningful ways. It combines an online modular approach of formal pedagogical ICT training with an informal online community experience of sharing, developing and critiquing of shared learning…

Educational Technology: Definition of the Problem.

ERIC Educational Resources Information Center

Razavi, Hossein

1978-01-01

An analysis of the evolution of educational technology demonstrates that the expansion of the concept has been unavoidable. A definition of educational technology as an economic approach to the micro and macro planning of education is introduced, and problems and guidelines for implementation in developing countries are discussed. (Author/JEG)

Exploring the Use of Information Communication Technologies by Selected Caribbean Extension Officers

ERIC Educational Resources Information Center

Strong, Robert; Ganpat, Wayne; Harder, Amy; Irby, Travis L.; Lindner, James R.

2014-01-01

Purpose: The purpose of this study was to describe selected Caribbean extension officers' technology preferences and examine factors that may affect their technology preferences. Design/methodology/approach: The sample consisted of extension officers (N = 119) participating in professional development training sessions in Grenada, Belize and Saint…

Using Technology to Deliver Career Development Services: Supporting Today's Students in Higher Education

ERIC Educational Resources Information Center

Venable, Melissa A.

2010-01-01

Career services professionals are increasingly involved in decisions regarding the use of technology. This article presents a number of considerations to be explored, including the characteristics and needs of today's students, available technologies, funding requirements, and confidentiality issues. The author recommends an approach that includes…

Successful Examples of Instructional Technology in Higher Education.

ERIC Educational Resources Information Center

Hortin, John A.

College programs considered to be successful in their use of instructional technology are described. The definition of instructional technology used to judge the media programs is as follows: a systematic approach to improve learning through media management, educational program development, and learning resources. Programs include the following:…

78 FR 23744 - Proposed Establishment of a Federally Funded Research and Development Center-First Notice

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-22

... technologies in the government and private sectors. The activity includes staff support for information... cybersecurity technologies in the government and private sectors. [cir] Generate technical expertise to create a... cybersecurity approaches that address the real world needs of complex Information Technology (IT) systems. By...

Ethical Issues in Instructional Technology: An Exploratory Framework

ERIC Educational Resources Information Center

Lucey, Thomas A.; Grant, Michael M.

2009-01-01

Purpose: The purpose of this paper is to explore a framework for considering moral K-12 instructional technology. It seeks to examine the extent that development of technology policies consider and respect affected parties interests. Design/methodology/approach: Interpreting morality as an economic concept that involves a reconciliation of…

Role development of nurses for technology-dependent children attending mainstream schools in Japan.

PubMed

Shimizu, Fumie; Suzuki, Machiko

2015-04-01

To describe the role development of nurses caring for medical technology-dependent children attending Japanese mainstream schools. Semi-structured interviews with 21 nurses caring for technology-dependent children were conducted and analyzed using the modified grounded theory approach. Nurses developed roles centered on maintaining technology-dependent children's physical health to support children's learning with each other, through building relationships, learning how to interact with children, understanding the children and the school community, and realizing the meaning of supporting technology-dependent children. These findings support nurses to build relationships of mutual trust with teachers and children, and learn on the job in mainstream schools. © 2015, Wiley Periodicals, Inc.

Vibration isolation technology: An executive summary of systems development and demonstration

NASA Technical Reports Server (NTRS)

Grodsinsky, Carlos M.; Logsdon, Kirk A.; Lubomski, Joseph F.

1993-01-01

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Vibration isolation technology - An executive summary of systems development and demonstration

NASA Astrophysics Data System (ADS)

Grodsinsky, C. M.; Logsdon, K. A.; Lubomski, J. F.

1993-01-01

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Globalization, Educational Hegemony, and Higher Education

ERIC Educational Resources Information Center

Olaniran, Bolanle A.; Agnello, Mary F.

2008-01-01

Purpose: The paper aims to put into context globalization as educational, economic, and technological relations, with attention to dimensions of variability and other problems associated with domination of western and northern post-industrial developed nations on the developing world. Design/methodology/approach: The approach taken in this paper…

Evaluation of Learning Gains through Integrated STEM Projects

ERIC Educational Resources Information Center

Corlu, Mehmet Ali; Aydin, Emin

2016-01-01

New approaches to instruction are needed in all educational levels in order to develop the skills suited to the twenty-first century (i.e., inquiry, problem solving, innovation, entrepreneurship, technological communication, experimental design, and investigativeness). This research evaluated the outcomes of an approach aiming to develop such…

Nano-Launcher Technologies, Approaches, and Life Cycle Assessment. Phase II

NASA Technical Reports Server (NTRS)

Zapata, Edgar

2014-01-01

Assist in understanding NASA technology and investment approaches, and other driving factors, necessary for enabling dedicated nano-launchers by industry at a cost and flight rate that (1) could support and be supported by an emerging nano-satellite market and (2) would benefit NASAs needs. Develop life-cycle cost, performance and other NASA analysis tools or models required to understand issues, drivers and challenges.

On one approach to health protection: Music of the brain.

PubMed

Fedotchev, Alexander; Radchenko, Grigoriy; Zemlianaia, Anna

2017-10-18

This review presents the current status of a method for prevention and timely correction of human functional disturbances that was first proposed by Russian neurologist Ya.I. Levin in 1998 and further developed by the authors. The approach is named "Music of the Brain" and is based on musical or music-like stimulation organized in strict accordance with the biopotentials of a patient's brain. Initial studies on the music of the brain approach were analyzed, and its limitations were noted. To enhance the efficiency and usability of the approach, several combinations of music therapy with neurofeedback technique - musical neurofeedback - were developed. Enhanced efficiency of the approach has been shown for correction of functional disturbances during pregnancy and for elimination of stress-induced states in high technology specialists. The use and advantages of musical neurofeedback technology for increasing human cognitive activity, correcting sleep disturbances and treatment of disorders of attention were verified. After further development and testing the approach may be suited for a wide range of therapeutic and rehabilitation procedures in the protection of public health.

Improving automobile fuel economy: new standards, new approaches

DOT National Transportation Integrated Search

1991-12-01

This report examines the major issues associated with developing new fuel economy standards. It builds on work that the Office of Technology Assessment conducted for its report, "Energy Technology Choices: Shaping Our Future." 118p.

EPA Policy for Innovative Environmental Technologies at Federal Facilities

EPA Pesticide Factsheets

This is a memo from the EPA Administrator, regarding the unique opportunities for the development and application of innovative technologies and approaches to pollution prevention, source control, site investigation, and remediation at Federal facilities.

Development of Science and Technology Literacy Materials at the Basic Level: Exemplar Materials. Revised during the Regional Workshop Organized within the Framework of Project 2000+: Scientific and Technological Literacy for All (Philippines, November 4-8, 1997).

ERIC Educational Resources Information Center

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

This collection of science activities is designed to supplement traditional science education by encompassing an issues-based approach to helping students develop scientific and technological literacy. Each unit can be used within an existing teaching sequence and includes an introduction specifying scientific issues and educational objectives, a…

Advanced Mirror Technology Development (AMTD) for Very Large Space Telescopes

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2014-01-01

Advanced Mirror Technology Development (AMTD) is a multi-year effort to systematically mature to TRL-6 the critical technologies needed to produce 4-m or larger flight-qualified UVOIR mirrors by 2018 so that a viable mission can be considered by the 2020 Decadal Review. This technology must enable missions capable of both general astrophysics & ultra-high contrast observations of exoplanets. To accomplish our objective, We use a science-driven systems engineering approach. We mature technologies required to enable the highest priority science AND result in a high-performance low-cost low-risk system.

High Temperature Joining and Characterization of Joint Properties in Silicon Carbide-Based Composite Materials

NASA Technical Reports Server (NTRS)

Halbig, Michael C.; Singh, Mrityunjay

2015-01-01

Advanced silicon carbide-based ceramics and composites are being developed for a wide variety of high temperature extreme environment applications. Robust high temperature joining and integration technologies are enabling for the fabrication and manufacturing of large and complex shaped components. The development of a new joining approach called SET (Single-step Elevated Temperature) joining will be described along with the overview of previously developed joining approaches including high temperature brazing, ARCJoinT (Affordable, Robust Ceramic Joining Technology), diffusion bonding, and REABOND (Refractory Eutectic Assisted Bonding). Unlike other approaches, SET joining does not have any lower temperature phases and will therefore have a use temperature above 1315C. Optimization of the composition for full conversion to silicon carbide will be discussed. The goal is to find a composition with no remaining carbon or free silicon. Green tape interlayers were developed for joining. Microstructural analysis and preliminary mechanical tests of the joints will be presented.

Overview of MEMS/NEMS technology development for space applications at NASA/JPL

NASA Astrophysics Data System (ADS)

George, Thomas

2003-04-01

This paper highlights the current technology development activities of the MEMS Technology Group at JPL. A diverse range of MEMS/NEMS technologies are under development, that are primarily applicable to NASA"s needs in the area of robotic planetary exploration. MEMS/NEMS technologies have obvious advantages for space applications, since they offer the promise of highly capable devices with ultra low mass, size and power consumption. However, the key challenge appears to be in finding efficient means to transition these technologies into "customer" applications. A brief description of this problem is presented along with the Group"s innovative approach to rapidly advance the maturity of technologies via insertion into space missions. Also described are some of the major capabilities of the MEMS Technology Group. A few important examples from among the broad classes of technologies being developed are discussed, these include the "Spider Web Bolometer", High-Performance Miniature Gyroscopes, an Electron Luminescence X-ray Spectrometer, a MEMS-based "Knudsen" Thermal Transpiration pump, MEMS Inchworm Actuators, and Nanowire-based Biological/Chemical Sensors.

Methods for Addressing Technology-Induced Errors: The Current State

PubMed Central

Dexheimer, J. W.; Hullin Lucay Cossio, C.; Gong, Y.; Jensen, S.; Kaipio, J.; Kennebeck, S.; Kirkendall, E.; Kushniruk, A. W.; Kuziemsky, C.; Marcilly, R.; Röhrig, R.; Saranto, K.; Senathirajah, Y.; Weber, J.; Takeda, H.

2016-01-01

Summary Objectives The objectives of this paper are to review and discuss the methods that are being used internationally to report on, mitigate, and eliminate technology-induced errors. Methods The IMIA Working Group for Health Informatics for Patient Safety worked together to review and synthesize some of the main methods and approaches associated with technology-induced error reporting, reduction, and mitigation. The work involved a review of the evidence-based literature as well as guideline publications specific to health informatics. Results The paper presents a rich overview of current approaches, issues, and methods associated with: (1) safe HIT design, (2) safe HIT implementation, (3) reporting on technology-induced errors, (4) technology-induced error analysis, and (5) health information technology (HIT) risk management. The work is based on research from around the world. Conclusions Internationally, researchers have been developing methods that can be used to identify, report on, mitigate, and eliminate technology-induced errors. Although there remain issues and challenges associated with the methodologies, they have been shown to improve the quality and safety of HIT. Since the first publications documenting technology-induced errors in healthcare in 2005, we have seen in a short 10 years researchers develop ways of identifying and addressing these types of errors. We have also seen organizations begin to use these approaches. Knowledge has been translated into practice in a short ten years whereas the norm for other research areas is of 20 years. PMID:27830228

Helping Them to Help Themselves: Case Study of an Integrated Popular Theatre Approach in Africa

ERIC Educational Resources Information Center

Chinyowa, Kennedy C.

2007-01-01

An outstanding problem that has haunted most development workers in Africa has been how to effectively engage rural communities who often have no access to modern technological media like newspapers, radio, television, video and film. The tendency has been for development workers to resort to top-down or blueprint development approaches that…

The Development of a Multi-Disciplinary Educational Programme in Biomedical Diagnostics: A Novel Approach

ERIC Educational Resources Information Center

MacCormac, Aoife; O'Brien, Emma; O'Kennedy, Richard

2011-01-01

This paper describes the development of a taught Master's course in biomedical diagnostics using a novel multi-disciplinary approach. This course, the first of its kind in Ireland, covers the science and technology underlying the development of medical diagnostic devices that detect early markers of diseases such as cancer. The ethical impact of…

Retinal stimulation strategies to restore vision: Fundamentals and systems.

PubMed

Yue, Lan; Weiland, James D; Roska, Botond; Humayun, Mark S

2016-07-01

Retinal degeneration, a leading cause of blindness worldwide, is primarily characterized by the dysfunctional/degenerated photoreceptors that impair the ability of the retina to detect light. Our group and others have shown that bioelectronic retinal implants restore useful visual input to those who have been blind for decades. This unprecedented approach of restoring sight demonstrates that patients can adapt to new visual input, and thereby opens up opportunities to not only improve this technology but also develop alternative retinal stimulation approaches. These future improvements or new technologies could have the potential of selectively stimulating specific cell classes in the inner retina, leading to improved visual resolution and color vision. In this review we will detail the progress of bioelectronic retinal implants and future devices in this genre as well as discuss other technologies such as optogenetics, chemical photoswitches, and ultrasound stimulation. We will discuss the principles, biological aspects, technology development, current status, clinical outcomes/prospects, and challenges for each approach. The review will cover functional imaging documented cortical responses to retinal stimulation in blind patients. Copyright © 2016 Elsevier Ltd. All rights reserved.

Designing eHealth that Matters via a Multidisciplinary Requirements Development Approach.

PubMed

Van Velsen, Lex; Wentzel, Jobke; Van Gemert-Pijnen, Julia Ewc

2013-06-24

Requirements development is a crucial part of eHealth design. It entails all the activities devoted to requirements identification, the communication of requirements to other developers, and their evaluation. Currently, a requirements development approach geared towards the specifics of the eHealth domain is lacking. This is likely to result in a mismatch between the developed technology and end user characteristics, physical surroundings, and the organizational context of use. It also makes it hard to judge the quality of eHealth design, since it makes it difficult to gear evaluations of eHealth to the main goals it is supposed to serve. In order to facilitate the creation of eHealth that matters, we present a practical, multidisciplinary requirements development approach which is embedded in a holistic design approach for eHealth (the Center for eHealth Research roadmap) that incorporates both human-centered design and business modeling. Our requirements development approach consists of five phases. In the first, preparatory, phase the project team is composed and the overall goal(s) of the eHealth intervention are decided upon. Second, primary end users and other stakeholders are identified by means of audience segmentation techniques and our stakeholder identification method. Third, the designated context of use is mapped and end users are profiled by means of requirements elicitation methods (eg, interviews, focus groups, or observations). Fourth, stakeholder values and eHealth intervention requirements are distilled from data transcripts, which leads to phase five, in which requirements are communicated to other developers using a requirements notation template we developed specifically for the context of eHealth technologies. The end result of our requirements development approach for eHealth interventions is a design document which includes functional and non-functional requirements, a list of stakeholder values, and end user profiles in the form of personas (fictitious end users, representative of a primary end user group). The requirements development approach presented in this article enables eHealth developers to apply a systematic and multi-disciplinary approach towards the creation of requirements. The cooperation between health, engineering, and social sciences creates a situation in which a mismatch between design, end users, and the organizational context can be avoided. Furthermore, we suggest to evaluate eHealth on a feature-specific level in order to learn exactly why such a technology does or does not live up to its expectations.

A Smart Wearable Sensor System for Counter-Fighting Overweight in Teenagers.

PubMed

Standoli, Carlo Emilio; Guarneri, Maria Renata; Perego, Paolo; Mazzola, Marco; Mazzola, Alessandra; Andreoni, Giuseppe

2016-08-10

PEGASO is a FP7-funded project whose goal is to develop an ICT and mobile-based platform together with an appropriate strategy to tackle the diffusion of obesity and other lifestyle-related illnesses among teenagers. Indeed, the design of an engaging strategy, leveraging a complementary set of technologies, is the approach proposed by the project to promote the adoption of healthy habits such as active lifestyle and balanced nutrition and to effectively counter-fight the emergence of overweight and obesity in the younger population. A technological key element of such a strategy sees the adoption of wearable sensors to monitor teenagers' activities, which is at the basis of developing awareness about the current lifestyle. This paper describes the experience carried out in the framework of the PEGASO project in developing and evaluating wearable monitoring systems addressed to adolescents. The paper describes the methodological approach based on the co-designing of such a wearable system and the main results that, in the first phase, involved a total of 407 adolescents across Europe in a series of focus groups conducted in three countries for the requirements definition phase. Moreover, it describes an evaluation process of signal reliability during the usage of the wearable system. The main results described here are: (a) a prototype of the standardized experimental protocol that has been developed and applied to test signal reliability in smart garments; (b) the requirements definition methodology through a co-design activity and approach to address user requirements and preferences and not only technological specifications. Such co-design approach is able to support a higher system acceptance and usability together with a sustained adoption of the solution with respect to the traditional technology push system development strategy.

A Smart Wearable Sensor System for Counter-Fighting Overweight in Teenagers

PubMed Central

Standoli, Carlo Emilio; Guarneri, Maria Renata; Perego, Paolo; Mazzola, Marco; Mazzola, Alessandra; Andreoni, Giuseppe

2016-01-01

PEGASO is a FP7-funded project whose goal is to develop an ICT and mobile-based platform together with an appropriate strategy to tackle the diffusion of obesity and other lifestyle-related illnesses among teenagers. Indeed, the design of an engaging strategy, leveraging a complementary set of technologies, is the approach proposed by the project to promote the adoption of healthy habits such as active lifestyle and balanced nutrition and to effectively counter-fight the emergence of overweight and obesity in the younger population. A technological key element of such a strategy sees the adoption of wearable sensors to monitor teenagers’ activities, which is at the basis of developing awareness about the current lifestyle. This paper describes the experience carried out in the framework of the PEGASO project in developing and evaluating wearable monitoring systems addressed to adolescents. The paper describes the methodological approach based on the co-designing of such a wearable system and the main results that, in the first phase, involved a total of 407 adolescents across Europe in a series of focus groups conducted in three countries for the requirements definition phase. Moreover, it describes an evaluation process of signal reliability during the usage of the wearable system. The main results described here are: (a) a prototype of the standardized experimental protocol that has been developed and applied to test signal reliability in smart garments; (b) the requirements definition methodology through a co-design activity and approach to address user requirements and preferences and not only technological specifications. Such co-design approach is able to support a higher system acceptance and usability together with a sustained adoption of the solution with respect to the traditional technology push system development strategy. PMID:27517929

Preparing Special Educators in Eastern North Carolina To Use Assistive Technology: A Multimedia Approach to Addressing Training Needs Unique to Rural Areas.

ERIC Educational Resources Information Center

Darrow, Melissa; And Others

This paper describes a project addressing the assistive technology training needs of teachers of children with disabilities in rural eastern North Carolina, through development of a multimedia software tutorial service. The project utilized both a special education/assistive technology professional and an instructional technology professional to…

Utilization of Space Station Freedom for technology research

NASA Technical Reports Server (NTRS)

Avery, Don E.

1992-01-01

Space Station Freedom presents a unique opportunity for technology developers to conduct research in the space environment. Research can be conducted in the pressurized volume of the Space Station's laboratories or attached to the Space Station truss in the vacuum of space. Technology developers, represented by the Office of Aeronautics and Space Technology (OAST), will have 12 percent of the available Space Station resources (volume, power, data, crew, etc.) to use for their research. Most technologies can benefit from research on Space Station Freedom and all these technologies are represented in the OAST proposed traffic model. This traffic model consists of experiments that have been proposed by technology developers but not necessarily selected for flight. Experiments to be flown in space will be selected through an Announcement of Opportunity (A.O.) process. The A.O. is expected to be released in August, 1992. Experiments will generally fall into one of the 3 following categories: (1) Individual technology experiments; (2) Instrumented Space Station; and (3) Guest investigator program. The individual technology experiments are those that do not instrument the Space Station nor directly relate to the development of technologies for evolution of Space Station or development of advanced space platforms. The Instrumented Space Station category is similar to the Orbiter Experiments Program and allows the technology developer to instrument subsystems on the Station or develop instrumentation packages that measure products or processes of the Space Station for the advancement of space platform technologies. The guest investigator program allows the user to request data from Space Station or other experiments for independent research. When developing an experiment, a developer should consider all the resources and infrastructure that Space Station Freedom can provide and take advantage of these to the maximum extent possible. Things like environment, accommodations, carriers, and integration should all be taken into account. In developing experiments at Langley Research Center, an iterative approach is proving useful. This approach uses Space Station utilization and subsystem experts to advise and critique experiment designs to take advantage of everything the Space Station has to offer. Also, solid object modeling and animation computer tools are used to fully visualize the experiment and its processes. This process is very useful for attached payloads and allows problems to be detected early in the experiment design phase.

The Integrated Mission Design Center (IMDC) at NASA Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Karpati, Gabriel; Martin, John; Steiner, Mark; Reinhardt, K.

2002-01-01

NASA Goddard has used its Integrated Mission Design Center (IMDC) to perform more than 150 mission concept studies. The IMDC performs rapid development of high-level, end-to-end mission concepts, typically in just 4 days. The approach to the studies varies, depending on whether the proposed mission is near-future using existing technology, mid-future using new technology being actively developed, or far-future using technology which may not yet be clearly defined. The emphasis and level of detail developed during any particular study depends on which timeframe (near-, mid-, or far-future) is involved and the specific needs of the study client. The most effective mission studies are those where mission capabilities required and emerging technology developments can synergistically work together; thus both enhancing mission capabilities and providing impetus for ongoing technology development.

Macroscole. A Holistic Approach to Science Teaching. A Discussion Paper. D-82/2.

ERIC Educational Resources Information Center

Risi, Marcel

Possible relationships between industrial innovation and science education are discussed, focusing on three systems for studying the process of development and identifying certain determining factors. The purpose of the approach is to identify the salient characteristics of the industrial world, technological development, and science teaching by…

Development of an Ultraflex-Based Thin Film Solar Array for Space Applications

NASA Technical Reports Server (NTRS)

White, Steve; Douglas, Mark; Spence, Brian; Jones, P. Alan; Piszczor, Michael F.

2003-01-01

As flexible thin film photovoltaic (FTFPV) cell technology is developed for space applications, integration into a viable solar array structure that optimizes the attributes of this cell technology is critical. An advanced version of ABLE'sS UltraFlex solar array platform represents a near-term, low-risk approach to demonstrating outstanding array performance with the implementation of FTFPV technology. Recent studies indicate that an advanced UltraFlex solar array populated with 15% efficient thin film cells can achieve over 200 W/kg EOL. An overview on the status of hardware development and the future potential of this technology is presented.

Foreign Language Teachers' Professional Development in Information Age

NASA Astrophysics Data System (ADS)

Fan, Xiying; Wu, Gang

Cultivation of students' learning autonomy has raised new challenges to teachers' professional development, dynamic, continuous, lifelong full-scale development, with emphasis on the creativity and constancy of the teachers' quality development. The teachers' professional development can take the following approaches: studying theories about foreign language teaching with the aid of modern information technology; organizing online teaching research activities supported by information technology and carrying peer observation and dialogue -teaching reflection in internet environment and fostering scholarly teachers.

NASA'S Changing Role in Technology Development and Transfer

NASA Technical Reports Server (NTRS)

Griner, Carolyn S.; Craft, Harry G., Jr.

1997-01-01

National Aeronautics and Space Administration NASA has historically had to develop new technology to meet its mission objectives. The newly developed technologies have then been transferred to the private sector to assist US industry's worldwide competitiveness and thereby spur the US economy. The renewed emphasis by the US Government on a proactive technology transfer approach has produced a number of contractual vehicles that assist technology transfer to industrial, aerospace and research firms. NASA's focus has also been on leveraging the shrinking space budget to accomplish "more with less." NASA's cooperative agreements and resource sharing agreements are measures taken to achieve this goal, and typify the changing role of government technology development and transfer with industry. Large commercial partnerships with aerospace firms, as typified by the X-33 and X-34 Programs, are evolving. A new emphasis on commercialization in the Small Business Innovative Research and Dual Use programs paves the way for more rapid commercial application of new technologies developed for NASA.

Managing the Perception of Advanced Technology Risks in Mission Proposals

NASA Technical Reports Server (NTRS)

Bellisario, Sebastian Nickolai

2012-01-01

Through my work in the project proposal office I became interested in how technology advancement efforts affect competitive mission proposals. Technology development allows for new instruments and functionality. However, including technology advancement in a mission proposal often increases perceived risk. Risk mitigation has a major impact on the overall evaluation of the proposal and whether the mission is selected. In order to evaluate the different approaches proposals took I compared the proposals claims of heritage and technology advancement to the sponsor feedback provided in the NASA debriefs. I examined a set of Discovery 2010 Mission proposals to draw patterns in how they were evaluated and come up with a set of recommendations for future mission proposals in how they should approach technology advancement to reduce the perceived risk.

Improving Global Access to New Vaccines: Intellectual Property, Technology Transfer, and Regulatory Pathways

PubMed Central

2014-01-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers. PMID:25211753

Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways.

PubMed

Crager, Sara Eve

2014-11-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

[Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways].

PubMed

Crager, Sara Eve

2015-01-01

The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

Space Photovoltaic Research and Technology Conference

NASA Technical Reports Server (NTRS)

1991-01-01

The Eleventh Space Photovoltaic Research and Technology conference was held at NASA Lewis Research Center from May 7 to 9, 1991. The papers and workshop summaries presented here report remarkable progress on a wide variety of approaches in space photovoltaics, both near and far term applications. Papers were presented in a variety of technical areas, including multijunction cell technology, GaAs and InP cells, system studies, cell and array development, and photovoltaics for conversion of laser radiation. Three workshops were held to discuss thin film cell development, III-V cell development, and space environmental effects.

LASERUT® Technology Development Programs for the Ultrasonic Inspection of Composites in the Aerospace Industry

NASA Astrophysics Data System (ADS)

Dubois, Marc; Drake, Thomas; Osterkamp, Mark; Yawn, Ken; Kaiser, David; Do, Tho; Maestas, Jeff; Thomas, Michael

2008-02-01

A laser-ultrasonic technique developed at Lockheed Martin Aeronautics called LaserUT® is used for the ultrasonic inspection of composite parts in the aeronautic industry and has demonstrated significant reduction in inspection labor and capital expenditure over approximately 20,000 parts so far. Development of new technologies will further increase LaserUT savings: structured-light mapping, improved CO2 laser, mid-infrared generation laser, and new robotic approach. Those different technologies are described and their status relatively to their introduction to production is discussed.

Science, Technology and Innovation as Social Goods for Development: Rethinking Research Capacity Building from Sen's Capabilities Approach.

PubMed

Mormina, Maru

2018-03-01

Science and technology are key to economic and social development, yet the capacity for scientific innovation remains globally unequally distributed. Although a priority for development cooperation, building or developing research capacity is often reduced in practice to promoting knowledge transfers, for example through North-South partnerships. Research capacity building/development tends to focus on developing scientists' technical competencies through training, without parallel investments to develop and sustain the socioeconomic and political structures that facilitate knowledge creation. This, the paper argues, significantly contributes to the scientific divide between developed and developing countries more than any skills shortage. Using Charles Taylor's concept of irreducibly social goods, the paper extends Sen's Capabilities Approach beyond its traditional focus on individual entitlements to present a view of scientific knowledge as a social good and the capability to produce it as a social capability. Expanding this capability requires going beyond current fragmented approaches to research capacity building to holistically strengthen the different social, political and economic structures that make up a nation's innovation system. This has implications for the interpretation of human rights instruments beyond their current focus on access to knowledge and for focusing science policy and global research partnerships to design approaches to capacity building/development beyond individual training/skills building.

U. S. and Soviet MHD Technology: A Comparative Overview

DTIC Science & Technology

1974-01-01

developments in magnetohydro- dynamic power generation, in which the Soviet program far exceeds the American« The USSR now operates the first MUD power...their respective development approaches, and compares major U.S. and USSR MHD facilities and national program objectives. Preceding page blank...devoted to the history of MHD develop - ment in these two countries, respective development approaches, and cur- rent status of individual programs

Summary of laser speckle photogrammetry for HOST

NASA Technical Reports Server (NTRS)

Pollack, Frank G.

1986-01-01

High temperature static strain measurement capability is important for the success of the HOST program. As part of the NASA Lewis effort to develop the technology for improved hot-section durability, the HOST instrumentation program has, as a major goal, the development of methods for measuring strain at high temperature. Development work includes both improvements in resistance strain-gauge technology and, as an alternative approach, the development of optical techniques for high temperature strain measurement.

The Development of NASA's Fault Management Handbook

NASA Technical Reports Server (NTRS)

Fesq, Lorraine

2011-01-01

Disciplined approach to Fault Management (FM) has not always been emphasized by projects, contributing to major schedule and cost overruns. Progress is being made on a number of fronts outside of Handbook effort: (1) Processes, Practices and Tools being developed at some Centers and Institutions (2) Management recognition . Constellation FM roles, Discovery/New Frontiers mission reviews (3) Potential Technology solutions . New approaches could avoid many current pitfalls (3a) New FM architectures, including model ]based approach integrated with NASA fs MBSE efforts (3b) NASA fs Office of the Chief Technologist: FM identified in seven of NASA fs 14 Space Technology Roadmaps . opportunity to coalesce and establish thrust area to progressively develop new FM techniques FM Handbook will help ensure that future missions do not encounter same FM ]related problems as previous missions Version 1 of the FM Handbook is a good start.

Label-free and amplified quantitation of proteins in complex mixtures using diffractive optics technology.

PubMed

Cleverley, Steve; Chen, Irene; Houle, Jean-François

2010-01-15

Immunoaffinity approaches remain invaluable tools for characterization and quantitation of biopolymers. Their application in separation science is often limited due to the challenges of immunoassay development. Typical end-point immunoassays require time consuming and labor-intensive approaches for optimization. Real-time label-free analysis using diffractive optics technology (dot) helps guide a very effective iterative process for rapid immunoassay development. Both label-free and amplified approaches can be used throughout feasibility testing and ultimately in the final assay, providing a robust platform for biopolymer analysis over a very broad dynamic range. We demonstrate the use of dot in rapidly developing assays for quantitating (1) human IgG in complex media, (2) a fusion protein in production media and (3) protein A contamination in purified immunoglobulin preparations. 2009 Elsevier B.V. All rights reserved.

The acceptance of green technology: A case study in Sabah Development Corridor

NASA Astrophysics Data System (ADS)

Jainudin, Noor Azland; Jugah, Ivy; Ali, Awang Nasrizal Awang; Tawie, Rudy

2017-08-01

Green technology is the development and application of products, equipment and systems used to conserve the environment which minimizes the negative impact from human activities. The technology can be in the form of green buildings or renewable energy such as hydro, solar and biogas. Development in SDC is still at the early stage, hence there is a prospect to plan for proper green concept implementation. With the increasing number of construction projects particularly in the rapid developing city of Kota Kinabalu, green technology as a whole is becoming more significant as it helps to develop effective solutions to encounter global environmental issues. Although there has been lengthy discussion on the green technology, the visibility of the implementation is still yet to be seen widely in Kota Kinabalu. The implementation of green technology in construction will support dynamic growth of economic development activities, while improving the environment. Hence, it is important to develop a strategic plan to promote the use of green technology while the areas are still developing. The focus of this correlative-based approach study is to investigate the perception and implementation of green technology in Kota Kinabalu from the industrial perspectives.

Applied breath analysis: an overview of the challenges and opportunities in developing and testing sensor technology for human health monitoring in aerospace and clinical applications

PubMed Central

Hunter, Gary W; Dweik, Raed A

2010-01-01

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A family of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption, and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity. However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This paper gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology. Clinical applications and the potential impact to the biomedical field of miniaturized smart gas sensor technology are discussed. PMID:20622933

Co-management of Water, Energy, and Food Systems: Where Are We and What Does it Take for Implementation?

NASA Astrophysics Data System (ADS)

Akhbari, M.

2015-12-01

Water, energy, and food are closely bound in consumption and production patterns. To increase resource efficiency and productivity in a sustainable fashion, co-management of water, energy, and food resources is becoming inevitable. These co-management schemes require implementation of nexus-based approaches, which takes the interconnections of water, energy, and food systems into account and considers that development in one area may have major effects on others. While society, economy and environment are the action areas to implement a nexus approach, finance, governance, infrastructure and technology can create solutions. Existing obstacles in the action areas and challenges associated with creating solutions increase the complexities to develop nexus-based approaches and complicate their implementation. This study, identifies existing social, economic, and environmental obstacles, financial demands and constraints, shortcomings in governance, and infrastructure problems in the United States as the main challenges that need to be overcome. Then, it will be discussed how advanced technology could be employed to facilitate implementation of nexus-based approaches, followed by providing some recommendations to enable institutions to employ new technology, overcome existing obstacles, and address challenges in order to implement nexus-based management approaches.

A Fast Technology Infusion Model for Aerospace Organizations

NASA Technical Reports Server (NTRS)

Shapiro, Andrew A.; Schone, Harald; Brinza, David E.; Garrett, Henry B.; Feather, Martin S.

2006-01-01

A multi-year Fast Technology Infusion initiative proposes a model for aerospace organizations to improve the cost-effectiveness by which they mature new, in-house developed software and hardware technologies for space mission use. The first year task under the umbrella of this initiative will provide the framework to demonstrate and document the fast infusion process. The viability of this approach will be demonstrated on two technologies developed in prior years with internal Jet Propulsion Laboratory (JPL) funding. One hardware technology and one software technology were selected for maturation within one calendar year or less. The overall objective is to achieve cost and time savings in the qualification of technologies. At the end of the recommended three-year effort, we will have demonstrated for six or more in-house developed technologies a clear path to insertion using a documented process that permits adaptation to a broad range of hardware and software projects.

Collaborative Action Research Approach Promoting Professional Development for Teachers of Students with Visual Impairment in Assistive Technology

ERIC Educational Resources Information Center

Argyropoulos, Vassilios; Nikolaraizi, Magda; Tsiakali, Thomai; Kountrias, Polychronis; Koutsogiorgou, Sofia-Marina; Martos, Aineias

2014-01-01

This paper highlights the framework and discusses the results of an action research project which aimed to facilitate the adoption of assistive technology devices and specialized software by teachers of students with visual impairment via a digital educational game, developed specifically for this project. The persons involved in this…

Tapping Technology in Creating Product Development Studies: Reflections on an ESP-Business Project

ERIC Educational Resources Information Center

Yeh, Aiden

2015-01-01

This paper describes a teacher's reflections on a technology-enhanced project-based learning approach to teaching an ESP-business lesson on product development, which is part of the curriculum for Conference English and Meetings Practice (CEMP), a business-track course for the Adult Continuing Education program at a private university in southern…

The Development and Evaluation of an Information Technology Support System to Facilitate Inter-Organisational Collaboration in HRD

ERIC Educational Resources Information Center

Ford, Norma J.

2006-01-01

Purpose: The purpose of this article is to evaluate the diffusion of and user response to an information technology support system (ITSS) which was designed to facilitate inter-organisational coordination and collaboration in the professional development of officers employed by local authorities (LAs). Design/methodology/approach: An action…

A Holistic Approach towards Information and Communication Technology (ICT) for Addressing Education Challenges in Asia and the Pacific

ERIC Educational Resources Information Center

Ra, Sungsup; Chin, Brian; Lim, Cher Ping

2016-01-01

Information and Communication Technology (ICT) offers opportunities for governments to address key education challenges of quality, equity, and efficiency. While governments and educational institutions in developed countries may have taken up these opportunities, many developing countries in Asia and the Pacific region have often missed them out.…

A Preliminary Evaluation of Short Blended Online Training Workshop for TPACK Development Using Technology Acceptance Model

ERIC Educational Resources Information Center

Alsofyani, Mohammed Modeef; Aris, Baharuddin bin; Eynon, Rebecca; Majid, Norazman Abdul

2012-01-01

The use of Short Blended Online Training (SBOT) for the development of Technological Pedagogical and Content Knowledge (TPACK) is a promising approach to facilitate the use of e-learning by academics. Adult learners prefer the blend of pedagogies such as the presentation, demonstration, practice and feedback if they are structured and…

Analysing Teachers' Practices in Technology Environments from an Activity Theoretical Approach

ERIC Educational Resources Information Center

Abboud-Blanchard, Maha; Vandebrouck, Fabrice

2012-01-01

The aim of this paper is to emphasize some research results about teachers' practices in technology-based-lessons. Articulating several theoretical developments of Activity Theory enables us to conceive a frame to characterise the evolutions of these practices and to interpret them in terms of "geneses of technology uses". We consider these…

The Role of Technology for the Dallas Public Library in Long Range Planning.

ERIC Educational Resources Information Center

Borgman, Christine L.

Major trends in library technology and technology in general, as indicated by information gathered through internal development work at the Dallas Public Library, professional readings, and interviews with experts, are discussed. Trends covered are: (1) internal library services focusing on a total systems approach to library automation; (2)…

People and Process: Managing the Human Side of Information Technology Application. Professional Paper Series, #7.

ERIC Educational Resources Information Center

Baltzer, Jan A.

Recognizing that the hard part of making the application of technology successful is the development of appropriate management structures and approaches, this paper reviews the research and writings of several top management and communications professionals and correlates these theories to the information technology environment on campus. Six…

Tackling Inhibitions to Careers in Science and Technology through Differentiated Mentoring Approach

ERIC Educational Resources Information Center

Nwosu, Stella N.; Etiubon, Rebecca U.; Udofia, Theresa M.

2014-01-01

Encouraging women to go into Science and Technology (S&T) careers should start with the young girls. In developing countries, such as Nigeria, girls experience challenges in studying science and technological subjects and pursuing careers in these professions. The study identifies factors that inhibit Nigerian girls from undertaking careers in…

A Framework for Flipped Learning

ERIC Educational Resources Information Center

Eppard, Jenny; Rochdi, Aicha

2017-01-01

Over the last few decades, with the rapid developments of mobile technology, the advent of Web 2.0 sites, and the expansion of social media, there has been an incremental use of technology in the classroom. One of the approaches for technological integration into the classroom is via flipped learning. This pedagogical method has become…

TELFest: An Approach to Encouraging the Adoption of Educational Technologies

ERIC Educational Resources Information Center

Latif, Farzana

2017-01-01

Barriers to technology adoption in teaching and learning are well documented, with a corresponding body of research focused on how these can be addressed. As a way to combine a variety of these adoption strategies, the University of Sheffield developed a Technology Enhanced Learning Festival, TELFest. This annual, week-long event, emphasises the…

Leveraging New Technologies for Professional Learning in Education: Digital Literacies as Culture Shift in Professional Development

ERIC Educational Resources Information Center

Murphy, Janet; Lebans, Robert

2009-01-01

Providing just-in-time job-embedded professional learning using a technologically mediated model achieves professional growth goals and encourages teachers to build digital literacy competencies and incorporate new technologies in instructional approaches in the classroom. This article highlights the lessons learned from an award-winning…

Innovation Education Enabled through a Collaborative Virtual Reality Learning Environment

ERIC Educational Resources Information Center

Thorsteinsson, Gisli; Page, Tom; Lehtonen, Miika; Ha, Joong Gyu

2006-01-01

This article provides a descriptive account of the development of an approach to the support of design and technology education with 3D Virtual Reality (VR) technologies on an open and distance learning basis. This work promotes an understanding of the implications and possibilities of advanced virtual learning technologies in education for…

The Effects of Reflection on Student's Technology Integration Self-Efficacy in an Educational Technology Course

ERIC Educational Resources Information Center

Hsieh, Bi-Jen

2015-01-01

This study explored whether guided reflection using predetermined prompts can enhance preservice teachers' development of technology integration self-efficacy (TISE) beliefs. A quantitative approach and a quasi-experimental, pre- and posttest design with two experimental groups and a control group were used. Two types of guided reflection prompts…

Application of Semantic Approaches and Interactive Virtual Technology to Improve Teaching Effectiveness

ERIC Educational Resources Information Center

Jou, Min; Liu, Chi-Chia

2012-01-01

This article describes an implementation of interactive virtual environments that have been designed for supporting the education of technical skills in material processing technology. The developed web-based systems provide the capability to train students in the technical skills of material processing technology without the need to work on…

Nurse Educators Utilizing Narratives with Technology to Improve the Student Learning Experience

ERIC Educational Resources Information Center

Tomasino, Jeanette R.

2018-01-01

Nursing education must evolve with the ever-changing forms of communication and technology and recognize generational differences in learning. The use of technology has created many opportunities to develop new teaching strategies in nursing education. Students today require and demand new educational approaches. The need to prepare students for a…

Approaching the new reality. [changes in NASA space programs due to US economy

NASA Technical Reports Server (NTRS)

Diaz, Al V.

1993-01-01

The focus on more frequent access to space through smaller, less costly missions, and on NASA's role as a source of technological advance within the U.S. economy is discussed. The Pluto fast flyby mission is examined as an illustration of this approach. Testbeds are to be developed to survive individual programs, becoming permanent facilities, to allow for technological upgrades on an ongoing basis.

Role-play and the Industrial Revolution: an STS approach to the teaching of steam engines

NASA Astrophysics Data System (ADS)

Sabka, Diego; Pereira de Pereira, Alexsandro; Lima Junior, Paulo

2016-11-01

Role-play is an interesting, although underexplored, way of teaching physics in high school. This paper presents a science-technology-society (STS) approach to the teaching of heat engines based on a role-play of the Industrial Revolution. Enacting the role-play, students are presented not only to scientific concepts, but also to the social and technological controversies of industrial development.

In vivo miniature robots for natural orifice surgery: State of the art and future perspectives.

PubMed

Tiwari, Manish M; Reynoso, Jason F; Lehman, Amy C; Tsang, Albert W; Farritor, Shane M; Oleynikov, Dmitry

2010-06-27

Natural orifice translumenal endoscopic surgery (NOTES) is the integration of laparoscopic minimally invasive surgery techniques with endoscopic technology. Despite the advances in NOTES technology, the approach presents several unique instrumentation and technique-specific challenges. Current flexible endoscopy platforms for NOTES have several drawbacks including limited stability, triangulation and dexterity, and lack of adequate visualization, suggesting the need for new and improved instrumentation for this approach. Much of the current focus is on the development of flexible endoscopy platforms that incorporate robotic technology. An alternative approach to access the abdominal viscera for either a laparoscopic or NOTES procedure is the use of small robotic devices that can be implanted in an intracorporeal manner. Multiple, independent, miniature robots can be simultaneously inserted into the abdominal cavity to provide a robotic platform for NOTES surgery. The capabilities of the robots include imaging, retraction, tissue and organ manipulation, and precise maneuverability in the abdominal cavity. Such a platform affords several advantages including enhanced visualization, better surgical dexterity and improved triangulation for NOTES. This review discusses the current status and future perspectives of this novel miniature robotics platform for the NOTES approach. Although these technologies are still in pre-clinical development, a miniature robotics platform provides a unique method for addressing the limitations of minimally invasive surgery, and NOTES in particular.

Advanced Platform Systems Technology study. Volume 3: Supporting data

NASA Technical Reports Server (NTRS)

1983-01-01

The overall study effort proceeded from the identification of 106 technology topics to the selection of 5 for detail trade studies. The technical issues and options were evaluated through the trade process. Finally, individual consideration was given to costs and benefits for the technologies identified for advancement. Eight priority technology items were identified for advancement. Supporting data generated during the trade selection and trade study process were presented. Space platform requirements, trade study and cost benefits analysis, and technology advancement planning are advanced. The structured approach used took advantage of a number of forms developed to ensure that a consistent approach was employed by each of the diverse specialists that participated. These forms were an intrinsic part of the study protocol.

[Application of risk-based approach for determination of critical factors in technology transfer of production of medicinal products].

PubMed

Beregovykh, V V; Spitskiy, O R

2014-01-01

Risk-based approach is used for examination of impact of different factors on quality of medicinal products in technology transfer. A general diagram is offered for risk analysis execution in technology transfer from pharmaceutical development to production. When transferring technology to full- scale commercial production it is necessary to investigate and simulate production process application beforehand in new real conditions. The manufacturing process is the core factorfor risk analysis having the most impact on quality attributes of a medicinal product. Further importantfactors are linked to materials and products to be handled and manufacturing environmental conditions such as premises, equipment and personnel. Usage of risk-based approach in designing of multipurpose production facility of medicinal products is shown where quantitative risk analysis tool RAMM (Risk Analysis and Mitigation Matrix) was applied.

A knee monitoring device and the preferences of patients living with osteoarthritis: a qualitative study

PubMed Central

Papi, Enrica; Belsi, Athina; McGregor, Alison H

2015-01-01

Objectives To identify perspective of patients with osteoarthritis, in particular design requirements and mode of use, of wearable technology to support the rehabilitation pathway. This study is part of a user-centred design approach adopted to develop a rehabilitation tool for patients with osteoarthritis. Design Qualitative study using a focus group approach; data management via a thematic analysis of patients’ responses. Participants 21 patients with osteoarthritis (age range 45–65 years) participated in 1 of the 4 focus groups. Recruitment continued until data saturation. Setting The study was conducted in a university setting. Results Main determinants of user acceptance of a wearable technology were appearance and comfort during use. Patients were supportive of the use of wearable technologies during rehabilitation and could recognise their benefit as monitors for their progress, incentives to adhere to exercise, and tools for more informed interaction with clinicians. Conclusions This paper should encourage adoption and development of wearable technology to support rehabilitation of patients with osteoarthritis. It is pivotal that technological development takes into account patients’ views in that it should be small, light, discrete, not ‘appear medical’ or challenge the identity of the user. Derived data should be available to patients and clinicians. Furthermore, wearable technologies should be developed to operate in two modes: for exercise guidance and assessment only, and for unobtrusive everyday monitoring. The information obtained from this study should guide the design of new technologies and support their use in clinical practice. PMID:26346873

Flat-plate solar array project. Volume 6: Engineering sciences and reliability

NASA Technical Reports Server (NTRS)

Ross, R. G., Jr.; Smokler, M. I.

1986-01-01

The Flat-Plate Solar Array (FSA) Project activities directed at developing the engineering technology base required to achieve modules that meet the functional, safety, and reliability requirements of large scale terrestrial photovoltaic systems applications are reported. These activities included: (1) development of functional, safety, and reliability requirements for such applications; (2) development of the engineering analytical approaches, test techniques, and design solutions required to meet the requirements; (3) synthesis and procurement of candidate designs for test and evaluation; and (4) performance of extensive testing, evaluation, and failure analysis of define design shortfalls and, thus, areas requiring additional research and development. A summary of the approach and technical outcome of these activities are provided along with a complete bibliography of the published documentation covering the detailed accomplishments and technologies developed.

Manned remote work station development article

NASA Technical Reports Server (NTRS)

1978-01-01

The two prime objectives of the Manned Remote Work Station (MRWS) Development Article Study are to first, evaluate the MRWS flight article roles and associated design concepts for fundamental requirements and embody key technology developments into a simulation program; and to provide detail manufacturing drawings and schedules for a simulator development test article. An approach is outlined which establishes flight article requirements based on past studies of Solar Power Satellite, orbital construction support equipments, construction bases and near term shuttle operations. Simulation objectives are established for those technology issues that can best be addressed on a simulator. Concepts for full-scale and sub-scale simulators are then studied to establish an overall approach to studying MRWS requirements. Emphasis then shifts to design and specification of a full-scale development test article.

Advanced flight computer. Special study

NASA Technical Reports Server (NTRS)

Coo, Dennis

1995-01-01

This report documents a special study to define a 32-bit radiation hardened, SEU tolerant flight computer architecture, and to investigate current or near-term technologies and development efforts that contribute to the Advanced Flight Computer (AFC) design and development. An AFC processing node architecture is defined. Each node may consist of a multi-chip processor as needed. The modular, building block approach uses VLSI technology and packaging methods that demonstrate a feasible AFC module in 1998 that meets that AFC goals. The defined architecture and approach demonstrate a clear low-risk, low-cost path to the 1998 production goal, with intermediate prototypes in 1996.

Space shuttle electrical power generation and reactant supply system

NASA Technical Reports Server (NTRS)

Simon, W. E.

1985-01-01

The design philosophy and development experience of fuel cell power generation and cryogenic reactant supply systems are reviewed, beginning with the state of technology at the conclusion of the Apollo Program. Technology advancements span a period of 10 years from initial definition phase to the most recent space transportation system (STS) flights. The development program encompassed prototype, verification, and qualification hardware, as well as post-STS-1 design improvements. Focus is on the problems encountered, the scientific and engineering approaches employed to meet the technological challenges, and the results obtained. Major technology barriers are discussed, and the evolving technology development paths are traced from their conceptual beginnings to the fully man-rated systems which are now an integral part of the shuttle vehicle.

Utility of Thin-Film Solar Cells on Flexible Substrates for Space Power

NASA Technical Reports Server (NTRS)

Dickman, J. E.; Hepp, A. F.; Morel, D. L.; Ferekides, C. S.; Tuttle, J. R.; Hoffman, D. J.; Dhere, N. G.

2004-01-01

The thin-film solar cell program at NASA GRC is developing solar cell technologies for space applications which address two critical metrics: specific power (power per unit mass) and launch stowed volume. To be competitive for many space applications, an array using thin film solar cells must significantly increase specific power while reducing stowed volume when compared to the present baseline technology utilizing crystalline solar cells. The NASA GRC program is developing two approaches. Since the vast majority of the mass of a thin film solar cell is in the substrate, a thin film solar cell on a very lightweight flexible substrate (polymer or metal films) is being developed as the first approach. The second approach is the development of multijunction thin film solar cells. Total cell efficiency can be increased by stacking multiple cells having bandgaps tuned to convert the spectrum passing through the upper cells to the lower cells. Once developed, the two approaches will be merged to yield a multijunction, thin film solar cell on a very lightweight, flexible substrate. The ultimate utility of such solar cells in space require the development of monolithic interconnections, lightweight array structures, and ultra-lightweight support and deployment techniques.

Open modular architecture controls at GM Powertrain: technology and implementation

NASA Astrophysics Data System (ADS)

Bailo, Clark P.; Yen, C. J.

1997-01-01

General Motors Powertrain Group (GMPTG) has been the leader in implementing open, modular architecture controller (OMAC) technologies in its manufacturing applications since 1986. The interest in OMAC has been greatly expanded for the past two years because of the advancement of personal computer technologies and the publishing of the OMAC whitepaper by the US automotive companies stating the requirements of OMAC technologies in automotive applications. The purpose of this paper is to describe the current OMAC projects and the future direction of implementation at GMPTG. An overview of the OMAC project and the definition of the OMAC concept are described first. The rationale of pursuing open technologies is explained from the perspective of GMPTG in lieu of its agile manufacturing strategy. Examples of existing PC-based control applications are listed to demonstrate the extensive commitment to PC-based technologies that has already been put in place. A migration plan form PC-based to OMAC-based systems with the thorough approach of validation are presented next to convey the direction that GMPTG is taking in implementing OMAC technologies. Leveraged technology development projects are described to illustrate the philosophy and approaches toward the development of OMAC technologies at GMPTG. Finally, certain implementation issues are discussed to emphasize efforts that are still required to have successful implementations of OMAC systems.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allderdice, A.; Rogers, J.H.

This guide provides readers with a broad understanding of the potential benefits that current renewable energy technologies can offer rural microenterprises. It also introduces the institutional approaches that have been developed to make RE technologies accessible to microentrepreneurs and the challenges that these entrepreneurs have encountered.

Retrospective Benefit-Cost Evaluation of DOE Investment in Photovoltaic Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

O'Connor, Alan C.; Loomis, Ross J.; Braun, Fern M.

2010-08-01

This study is a retrospective analysis of net benefits accruing from DOE's investment in photovoltaic (PV) technology development. The study employed a technology cluster approach. That is, benefits measured for a subset of technologies in a meaningful cluster, or portfolio, of technologies were compared to the total investment in the cluster to provide a lower bound measure of return for the entire cluster.

Investigation of air transportation technology at Massachusetts Institute of Technology, 1985

NASA Technical Reports Server (NTRS)

Simpson, Robert W.

1987-01-01

Two areas of research are discussed, an investigation into runway approach flying with Loran C and a series of research topics in the development of experimental validation of methodologies to support aircraft icing analysis. Flight tests with the Loran C led to the conclusion that it is a suitable system for non-precision approaches, and that time-difference corrections made every eight weeks in the instrument approach plates will produce acceptable errors. In the area of aircraft icing analysis, wind tunnel and flight test results are discussed.

Inquisitivism or "The HHHMMM??? What Does This Button Do?" Approach to Learning.

ERIC Educational Resources Information Center

Harapnuik, Dwayne

This paper discusses the development of a learning approach based on the unique needs of adult learners who are required to learn and use new information technologies. It establishes how the "Inquisitivism" learning approach has evolved from a synthesis of key cognitive learning theories into one cohesive approach and how the…

Cutting More than Metal: Breaking the Development Cycle

NASA Technical Reports Server (NTRS)

Singer, Chris

2014-01-01

New technology is changing the way we do business at NASA. The ability to use these new tools is made possible by a learning culture able to embrace innovation, flexibility, and prudent risk tolerance, while retaining the hard-won lessons learned of other successes and failures. Technologies such as 3-D manufacturing and structured light scanning are re-shaping the entire product life cycle, from design and analysis, through production, verification, logistics and operations. New fabrication techniques, verification techniques, integrated analysis, and models that follow the hardware from initial concept through operation are reducing the cost and time of building space hardware. Using these technologies to be more efficient, reliable and affordable requires we bring them to a level safe for NASA systems, maintain appropriate rigor in testing and acceptance, and transition new technology. Maximizing these technologies also requires cultural acceptance and understanding and balancing rules with creativity. Evolved systems engineering processes at NASA are increasingly more flexible than they have been in the past, enabling the implementation of new techniques and approaches. This paper provides an overview of NASA Marshall Space Flight Center's new approach to development, as well as examples of how that approach has been incorporated into NASA's Space Launch System (SLS) Program, which counts among its key tenants - safety, affordability, and sustainability. One of the 3D technologies that will be discussed in this paper is the design and testing of various rocket engine components.

Current and Future Repellent Technologies: The Potential of Spatial Repellents and Their Place in Mosquito-Borne Disease Control.

PubMed

Norris, Edmund J; Coats, Joel R

2017-01-29

Every year, approximately 700,000 people die from complications associated with etiologic disease agents transmitted by mosquitoes. While insecticide-based vector control strategies are important for the management of mosquito-borne diseases, insecticide-resistance and other logistical hurdles may lower the efficacy of this approach, especially in developing countries. Repellent technologies represent another fundamental aspect of preventing mosquito-borne disease transmission. Among these technologies, spatial repellents are promising alternatives to the currently utilized contact repellents and may significantly aid in the prevention of mosquito-borne disease if properly incorporated into integrated pest management approaches. As their deployment would not rely on prohibitively expensive or impractical novel accessory technologies and resources, they have potential utility in developing countries where the burden of mosquito-borne disease is most prevalent. This review aims to describe the history of various repellent technologies, highlight the potential of repellent technologies in preventing the spread of mosquito-borne disease, and discuss currently known mechanisms that confer resistance to current contact and spatial repellents, which may lead to the failures of these repellents. In the subsequent section, current and future research projects aimed at exploring long-lasting non-pyrethroid spatial repellent molecules along with new paradigms and rationale for their development will be discussed.

Current and Future Repellent Technologies: The Potential of Spatial Repellents and Their Place in Mosquito-Borne Disease Control

PubMed Central

Norris, Edmund J.; Coats, Joel R.

2017-01-01

Every year, approximately 700,000 people die from complications associated with etiologic disease agents transmitted by mosquitoes. While insecticide-based vector control strategies are important for the management of mosquito-borne diseases, insecticide-resistance and other logistical hurdles may lower the efficacy of this approach, especially in developing countries. Repellent technologies represent another fundamental aspect of preventing mosquito-borne disease transmission. Among these technologies, spatial repellents are promising alternatives to the currently utilized contact repellents and may significantly aid in the prevention of mosquito-borne disease if properly incorporated into integrated pest management approaches. As their deployment would not rely on prohibitively expensive or impractical novel accessory technologies and resources, they have potential utility in developing countries where the burden of mosquito-borne disease is most prevalent. This review aims to describe the history of various repellent technologies, highlight the potential of repellent technologies in preventing the spread of mosquito-borne disease, and discuss currently known mechanisms that confer resistance to current contact and spatial repellents, which may lead to the failures of these repellents. In the subsequent section, current and future research projects aimed at exploring long-lasting non-pyrethroid spatial repellent molecules along with new paradigms and rationale for their development will be discussed. PMID:28146066

[Information technology in medical education].

PubMed

Ramić, A

1999-01-01

The role of information technology in educational models of under-graduate and post-graduate medical education is growing in 1980's influenced by PC's break-in in medical practice and creating relevant data basis, and, particularly, in 1990's by integration of information technology on international level, development of international network, Internet, Telemedicin, etc. The development of new educational information technology is evident, proving that information in transfer of medical knowledge, medical informatics and communication systems represent the base of medical practice, medical education and research in medical sciences. In relation to the traditional approaches in concept, contents and techniques of medical education, new models of education in training of health professionals, using new information technology, offer a number of benefits, such as: decentralization and access to relevant data sources, collecting and updating of data, multidisciplinary approach in solving problems and effective decision-making, and affirmation of team work within medical and non-medical disciplines. Without regard to the dynamics of change and progressive reform orientation within health sector, the development of modern medical education is inevitable for all systems a in which information technology and available data basis, as a base of effective and scientifically based medical education of health care providers, give guarantees for efficient health care and improvement of health of population.

In-Space Cryogenic Propellant Depot Stepping Stone

NASA Technical Reports Server (NTRS)

Howell, Joe T.; Mankins, John C.; Fikes, John C.

2005-01-01

An In-Space Cryogenic Propellant Depot (ISCPD) is an important stepping stone to provide the capability to preposition, store, manufacture, and later use the propellants for Earth-Neighborhood campaigns and beyond. An in-space propellant depot will provide affordable propellants and other similar consumables to support the development of sustainable and affordable exploration strategies as well as commercial space activities. An in-space propellant depot not only requires technology development in key areas such as zero boil-off storage and fluid transfer, but in other areas such as lightweight structures, highly reliable connectors, and autonomous operations. These technologies can be applicable to a broad range of propellant depot concepts or specific to a certain design. In addition, these technologies are required for spacecraft and orbit transfer vehicle propulsion and power systems, and space life support. Generally, applications of this technology require long-term storage, on-orbit fluid transfer and supply, cryogenic propellant production from water, unique instrumentation and autonomous operations. This paper discusses the reasons why such advances are important to future affordable and sustainable operations in space. This paper also discusses briefly R&D objectives comprising a promising approach to the systems planning and evolution into a meaningful stepping stone design, development, and implementation of an In-Space Cryogenic Propellant Depot. The success of a well-planned and orchestrated approach holds great promise for achieving innovation and revolutionary technology development for supporting future exploration and development of space.

Architectures of small satellite programs in developing countries

NASA Astrophysics Data System (ADS)

Wood, Danielle; Weigel, Annalisa

2014-04-01

Global participation in space activity is growing as satellite technology matures and spreads. Countries in Africa, Asia and Latin America are creating or reinvigorating national satellite programs. These countries are building local capability in space through technological learning. This paper analyzes implementation approaches in small satellite programs within developing countries. The study addresses diverse examples of approaches used to master, adapt, diffuse and apply satellite technology in emerging countries. The work focuses on government programs that represent the nation and deliver services that provide public goods such as environmental monitoring. An original framework developed by the authors examines implementation approaches and contextual factors using the concept of Systems Architecture. The Systems Architecture analysis defines the satellite programs as systems within a context which execute functions via forms in order to achieve stakeholder objectives. These Systems Architecture definitions are applied to case studies of six satellite projects executed by countries in Africa and Asia. The architectural models used by these countries in various projects reveal patterns in the areas of training, technical specifications and partnership style. Based on these patterns, three Archetypal Project Architectures are defined which link the contextual factors to the implementation approaches. The three Archetypal Project Architectures lead to distinct opportunities for training, capability building and end user services.

Antisense oligonucleotide technologies in drug discovery.

PubMed

Aboul-Fadl, Tarek

2006-09-01

The principle of antisense oligonucleotide (AS-OD) technologies is based on the specific inhibition of unwanted gene expression by blocking mRNA activity. It has long appeared to be an ideal strategy to leverage new genomic knowledge for drug discovery and development. In recent years, AS-OD technologies have been widely used as potent and promising tools for this purpose. There is a rapid increase in the number of antisense molecules progressing in clinical trials. AS-OD technologies provide a simple and efficient approach for drug discovery and development and are expected to become a reality in the near future. This editorial describes the established and emerging AS-OD technologies in drug discovery.

Integrated methodology for standard-setting norms of innovative product in the new competitive environment

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadiy

2017-07-01

Modern theory of technological and economical development is based on long-term cycles. So far it has been proved that the technological structure of the economy can be subdivided into groups of technological complexes, which are inter-related with each other by similar technological links, so called technological modes. Technological mode is defined as a complex of interrelated production units of similar technological level, which develop simultaneously. In order to provide competitiveness of products in the new changing conditions, it is necessary to make sure that they meet all the regulatory requirements specified in standards. But the existing and the fast changing situation on the merchandise markets causes disbalance between the growing customer requirements and the technological capabilities of the manufacturer. This makes the issue of standardization development even more urgent both from the point of view of establishing the current positions and from the point of view of possible promising development trends in technology. In the paper scientific and engineering principles of developing standardization as a science are described. It is shown that further development of standardization is based on the principles of advanced standardization the main idea of which is to set up the prospective requirements to the innovative product. Modern approaches of advanced standardization are shown in this paper. The complexity of the negotiation procedure between customer and manufacturer as a whole and achieving of consensus, in particular, make it necessary to find conceptually new approaches to developing mathematical models. The developed methodology picture the process of achieving the consensus between customer and manufacturer while developing the standard norms in the form of decreasing S-curve diagram. It means that in the end of the negotiation process, there is no difference between customer and manufacturer positions. It makes it possible to provide the basics of the assessment using the differential equation of the relationship between the rate of change of quality assessment and the distance of the estimated parameter value from the best value to the worst one. The obtained mathematical model can be used in the practice of standardization decreasing time of setting standard norms.

Nurse adoption of continuous patient monitoring on acute post-surgical units: managing technology implementation.

PubMed

Jeskey, Mary; Card, Elizabeth; Nelson, Donna; Mercaldo, Nathaniel D; Sanders, Neal; Higgins, Michael S; Shi, Yaping; Michaels, Damon; Miller, Anne

2011-10-01

To report an exploratory action-research process used during the implementation of continuous patient monitoring in acute post-surgical nursing units. Substantial US Federal funding has been committed to implementing new health care technology, but failure to manage implementation processes may limit successful adoption and the realisation of proposed benefits. Effective approaches for managing barriers to new technology implementation are needed. Continuous patient monitoring was implemented in three of 13 medical/surgical units. An exploratory action-feedback approach, using time-series nurse surveys, was used to identify barriers and develop and evaluate responses. Post-hoc interviews and document analysis were used to describe the change implementation process. Significant differences were identified in night- and dayshift nurses' perceptions of technology benefits. Research nurses' facilitated the change process by evolving 'clinical nurse implementation specialist' expertise. Health information technology (HIT)-related patient outcomes are mediated through nurses' acting on new information but HIT designed for critical care may not transfer to acute care settings. Exploratory action-feedback approaches can assist nurse managers in assessing and mitigating the real-world effects of HIT implementations. It is strongly recommended that nurse managers identify stakeholders and develop comprehensive plans for monitoring the effects of HIT in their units. © 2011 Blackwell Publishing Ltd.

Combining Domain-driven Design and Mashups for Service Development

NASA Astrophysics Data System (ADS)

Iglesias, Carlos A.; Fernández-Villamor, José Ignacio; Del Pozo, David; Garulli, Luca; García, Boni

This chapter presents the Romulus project approach to Service Development using Java-based web technologies. Romulus aims at improving productivity of service development by providing a tool-supported model to conceive Java-based web applications. This model follows a Domain Driven Design approach, which states that the primary focus of software projects should be the core domain and domain logic. Romulus proposes a tool-supported model, Roma Metaframework, that provides an abstraction layer on top of existing web frameworks and automates the application generation from the domain model. This metaframework follows an object centric approach, and complements Domain Driven Design by identifying the most common cross-cutting concerns (security, service, view, ...) of web applications. The metaframework uses annotations for enriching the domain model with these cross-cutting concerns, so-called aspects. In addition, the chapter presents the usage of mashup technology in the metaframework for service composition, using the web mashup editor MyCocktail. This approach is applied to a scenario of the Mobile Phone Service Portability case study for the development of a new service.

Formulation approaches to pediatric oral drug delivery: benefits and limitations of current platforms

PubMed Central

Lopez, Felipe L; Ernest, Terry B; Tuleu, Catherine; Gul, Mine Orlu

2015-01-01

Introduction: Most conventional drug delivery systems are not acceptable for pediatric patients as they differ in their developmental status and dosing requirements from other subsets of the population. Technology platforms are required to aid the development of age-appropriate medicines to maximize patient acceptability while maintaining safety, efficacy, accessibility and affordability. Areas covered: The current approaches and novel developments in the field of age-appropriate drug delivery for pediatric patients are critically discussed including patient-centric formulations, administration devices and packaging systems. Expert opinion: Despite the incentives provided by recent regulatory modifications and the efforts of formulation scientists, there is still a need for implementation of pharmaceutical technologies that enable the manufacture of licensed age-appropriate formulations. Harmonization of endeavors from regulators, industry and academia by sharing learning associated with data obtained from pediatric investigation plans, product development pathways and scientific projects would be the way forward to speed up bench-to-market age appropriate formulation development. A collaborative approach will benefit not only pediatrics, but other patient populations such as geriatrics would also benefit from an accelerated patient-centric approach to drug delivery. PMID:26165848

Payload software technology

NASA Technical Reports Server (NTRS)

1976-01-01

A software analysis was performed of known STS sortie payload elements and their associated experiments. This provided basic data for STS payload software characteristics and sizes. A set of technology drivers was identified based on a survey of future technology needs and an assessment of current software technology. The results will be used to evolve a planned approach to software technology development. The purpose of this plan is to ensure that software technology is advanced at a pace and a depth sufficient to fulfill the identified future needs.

STEM learning on electricity using arduino-phet based experiment to improve 8th grade students’ STEM literacy

NASA Astrophysics Data System (ADS)

Prima, E. C.; Oktaviani, T. D.; Sholihin, H.

2018-05-01

Technology is the application of scientific knowledge for practical purposes, especially in industry. One way to support the development of the technology is by integrating the use of technology and build the technology with the learning process in the form of STEM (science, technology, engineering, mathematics) Learning approach. Applying STEM Learning could improve Students’ STEM Literacy. The learning approach is applied in every aspect of Learning including the application of STEM Learning in the lesson plan and worksheet. The method used in this research is weak experimental method. One group class (N=15) is taken and learn using STEM Learning approach. The topic choosen is the electricity topic which is separated into electrical circuit and parameters. The learning process is separated into 3 meetings. 15 Students are given a STEM Literacy test item before and after the lesson. The result of the normalized gain shows there are improvement in students’ STEM Literacy by < \\overline{g}> 0.16 categorieed as low improvement. The most higher improvement is the students’ technology literacy, because students learn using the same technology in every meeting. This factor influences students’ technology literacy so the result is higher than another.

Utilization of waste materials, non-refined materials, and renewable energy in in situ remediation and their sustainability benefits.

PubMed

Favara, Paul; Gamlin, Jeff

2017-12-15

In the ramp-up to integrating sustainability into remediation, a key industry focus area has been to reduce the environmental footprint of treatment processes. The typical approach to integrating sustainability into remediation projects has been a top-down approach, which involves developing technology options and then applying sustainability thinking to the technology, after it has been conceptualized. A bottom-up approach allows for systems thinking to be included in remedy selection and could potentially result in new or different technologies being considered. When using a bottom-up approach, there is room to consider the utilization of waste materials, non-refined materials, and renewable energy in remediation technology-all of which generally have a smaller footprint than processed materials and traditional forms of energy. By integrating more systems thinking into remediation projects, practitioners can think beyond the traditional technologies typically used and how technologies are deployed. To compare top-down and bottom-up thinking, a traditional technology that is considered very sustainable-enhanced in situ bioremediation-is compared to a successful, but infrequently deployed technology-subgrade biogeochemical reactors. Life Cycle Assessment is used for the evaluation and shows the footprint of the subgrade biogeochemical reactor to be lower in all seven impact categories evaluated, sometimes to a significant degree. Copyright © 2017 Elsevier Ltd. All rights reserved.

Space and Industrial Brine Drying Technologies

NASA Technical Reports Server (NTRS)

Jones, Harry W.; Wisniewski, Richard S.; Flynn, Michael; Shaw, Hali

2014-01-01

This survey describes brine drying technologies that have been developed for use in space and industry. NASA has long considered developing a brine drying system for the International Space Station (ISS). Possible processes include conduction drying in many forms, spray drying, distillation, freezing and freeze drying, membrane filtration, and electrical processes. Commercial processes use similar technologies. Some proposed space systems combine several approaches. The current most promising candidates for use on the ISS use either conduction drying with membrane filtration or spray drying.

Proposed Project Selection Method for Human Support Research and Technology Development (HSR&TD)

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

The purpose of HSR&TD is to deliver human support technologies to the Exploration Systems Mission Directorate (ESMD) that will be selected for future missions. This requires identifying promising candidate technologies and advancing them in technology readiness until they are acceptable. HSR&TD must select an may of technology development projects, guide them, and either terminate or continue them, so as to maximize the resulting number of usable advanced human support technologies. This paper proposes an effective project scoring methodology to support managing the HSR&TD project portfolio. Researchers strongly disagree as to what are the best technology project selection methods, or even if there are any proven ones. Technology development is risky and outstanding achievements are rare and unpredictable. There is no simple formula for success. Organizations that are satisfied with their project selection approach typically use a mix of financial, strategic, and scoring methods in an open, established, explicit, formal process. This approach helps to build consensus and develop management insight. It encourages better project proposals by clarifying the desired project attributes. We propose a project scoring technique based on a method previously used in a federal laboratory and supported by recent research. Projects are ranked by their perceived relevance, risk, and return - a new 3 R's. Relevance is the degree to which the project objective supports the HSR&TD goal of developing usable advanced human support technologies. Risk is the estimated probability that the project will achieve its specific objective. Return is the reduction in mission life cycle cost obtained if the project is successful. If the project objective technology performs a new function with no current cost, its return is the estimated cash value of performing the new function. The proposed project selection scoring method includes definitions of the criteria, a project evaluation questionnaire, and a scoring formula.

AFSPC Innovation and Science and Technology Outreach to Industry and Academia

NASA Technical Reports Server (NTRS)

Sanchez, Merri J.; Dills, Anthony N.; Chandler, Faith

2016-01-01

The U.S. Air Force is taking a strategic approach to ensuring that we are at the cutting edge of science and technology. This includes fostering game-changing approaches and technologies that are balanced with operational needs. The security of the Nation requires a constant pursuit of science, technical agility, and a rapid adoption of innovation. This includes pursuits of game-changing technologies and domains that perhaps we cannot even imagine today. This paper highlights the Air Force Space Command (AFSPC) collaboration and outreach to other government agencies, military and national laboratories, industry, and academia on long term science and technology challenges. In particular we discuss the development of the AFSPC Long Term Science and Technology Challenges that include both space and cyberspace operations within a multi-domain environment and the subsequent Innovation Summits.

PERMEABLE REACTIVE BARRIERS FOR REMEDIATION OF INORGANIC CONTAMINANTS

EPA Science Inventory

The permeable reactive barrier (PRB) technology is an in-situ approach for groundwater remediation that couples subsurface flow management with a passive chemical or biochemical treatment zone. The development and application of the PRB technology has progressed over the last de...

Science and Technological Innovation.

ERIC Educational Resources Information Center

Braun, Ernest

1979-01-01

This article is based on a presentation at the 1979 conference of the Education Group of The Institute of Physics which was held in Cambridge, England. It discusses the interaction between science and technological innovation using a historical approach: the development of microelectronics. (HM)

Fire Safety of Passenger Trains: A Review of U.S. and Foreign Approaches

DOT National Transportation Integrated Search

1993-12-01

could develop into potentially life-threatening events. Fire safety is an area of particular interest for both : conventional intercity and commuter trains, as well as new alternative high-speed train technologies. These : technologies include steel-...

Multimedia Instruction Initiative: Building Faculty Competence.

ERIC Educational Resources Information Center

Haile, Penelope J.

Hofstra University began a university-wide initiative to enhance classroom instruction with multimedia technology and foster collaborative approaches to learning. The Multimedia Instruction Initiative emphasized teamwork among faculty, students, and computer center support staff to develop a technology-enriched learning environment supported by…

Robotics: Using Technology to Teach New Technologies.

ERIC Educational Resources Information Center

Cohen, Karen C.; Meyer, Carol D.

1984-01-01

Discusses the development of industrial robotics training materials, considering the need for such materials, preliminary curriculum design, the Piagetian approach followed, and the uses of computer assisted instruction. A list of robotics curriculum courses (with content and audience indicated) is included. (JN)

Airborne Lidar Surface Topography (LIST) Simulator

NASA Technical Reports Server (NTRS)

Yu, Anthony W.; Krainak, Michael A.; Harding, David J.; Abshire, James B.; Sun, Xiaoli; Cavanaugh, John; Valett, Susan; Ramos-Izquierdo, Luis; Winkert, Tom; Plants, Michael;

Space station systems technology study (add-on task). Volume 3: Technology advancement program plan

NASA Technical Reports Server (NTRS)

1985-01-01

Program plans are given for an integrating controller for space station autonomy as well as for controls and displays. The technical approach, facility requirements and candidate facilities, development schedules, and resource requirements estimates are given.

The NCI Alliance for Nanotechnology in Cancer: achievement and path forward.

PubMed

Ptak, Krzysztof; Farrell, Dorothy; Panaro, Nicholas J; Grodzinski, Piotr; Barker, Anna D

2010-01-01

Nanotechnology is a 'disruptive technology', which can lead to a generation of new diagnostic and therapeutic products, resulting in dramatically improved cancer outcomes. The National Cancer Institute (NCI) of National Institutes of Health explores innovative approaches to multidisciplinary research allowing for a convergence of molecular biology, oncology, physics, chemistry, and engineering and leading to the development of clinically worthy technological approaches. These initiatives include programmatic efforts to enable nanotechnology as a driver of advances in clinical oncology and cancer research, known collectively as the NCI Alliance for Nanotechnology in Cancer (ANC). Over the last 5 years, ANC has demonstrated that multidisciplinary approach catalyzes scientific developments and advances clinical translation in cancer nanotechnology. The research conducted by ANC members has improved diagnostic assays and imaging agents, leading to the development of point-of-care diagnostics, identification and validation of numerous biomarkers for novel diagnostic assays, and the development of multifunctional agents for imaging and therapy. Numerous nanotechnology-based technologies developed by ANC researchers are entering clinical trials. NCI has re-issued ANC program for next 5 years signaling that it continues to have high expectations for cancer nanotechnology's impact on clinical practice. The goals of the next phase will be to broaden access to cancer nanotechnology research through greater clinical translation and outreach to the patient and clinical communities and to support development of entirely new models of cancer care.

An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies

NASA Technical Reports Server (NTRS)

Kostiuk, Peter F.; Adams, Milton B.; Allinger, Deborah F.; Rosch, Gene; Kuchar, James

1998-01-01

The continuing growth of air traffic will place demands on NASA's Air Traffic Management (ATM) system that cannot be accommodated without the creation of significant delays and economic impacts. To deal with this situation, work has begun to develop new approaches to providing a safe and economical air transportation infrastructure. Many of these emerging air transport technologies will represent radically new approaches to ATM, both for ground and air operations.

Building Project Management Communities: Exploring the Contribution of Patterns Supported by Web 2.0 Technologies

ERIC Educational Resources Information Center

Burd, Elizabeth L.; Hatch, Andrew; Ashurst, Colin; Jessop, Alan

2009-01-01

This article describes an approach whereby patterns are used to describe management issues and solutions to be used during the project management of team-based software development. The work describes how web 2.0 technologies have been employed to support the use and development of such patterns. To evaluate the success of patterns and the…

National Center for Advanced Manufacturing Overview

NASA Technical Reports Server (NTRS)

Vickers, John H.

2000-01-01

This paper presents a general overview of the National Center for Advanced Manufacturing, with an emphasis on Aerospace Materials, Processes and Environmental Technology. The topics include: 1) Background; 2) Mission; 3) Technology Development Approach; 4) Space Transportation Significance; 5) Partnering; 6) NCAM MAF Project; 7) NASA & Calhoun Community College; 8) Educational Development; and 9) Intelligent Synthesis Environment. This paper is presented in viewgraph form.

Using the Technology of Critical Thinking Development (CTD) as a Means of Forming Competencies of Students Majoring in "Life Safety"

ERIC Educational Resources Information Center

Kayumova, Leysan R.; Morozova, Marina A.

2016-01-01

The relevance of the research problem is caused by the need to use various teaching methods and techniques in training students majoring in pedagogical specialties while implementing the competency approach in education. Information about the technology of critical thinking development (CTD) in future teachers training is limited, and the…

A Design-Based Research Approach to Improving Professional Development and Teacher Knowledge: The Case of the Smithsonian Learning Lab

ERIC Educational Resources Information Center

Zinger, Doron; Naranjo, Ashley; Amador, Isabel; Gilbertson, Nicole; Warschauer, Mark

2017-01-01

Incorporating technology in classrooms to promote student learning is an ongoing instructional challenge. Teacher professional development (PD) is a central component of teacher education to support student use of technology and can improve student learning, but PD has had mixed results. In this study, researchers investigated a PD program…

AgRISTARS: Agriculture and resources inventory surveys through aerospace remote sensing

NASA Technical Reports Server (NTRS)

1982-01-01

The rationale, objectives, participants, and approach of the AgRISTARS program are described. Progress is reported in activities related to early warning and crop condition assessment; inventory technology development (formerly foreign commodity production forecasting); yield model development; supporting research; soil moisture; renewable resources inventory; domestic crops and land cover; and conservation and pollution. Emphasis is on technological highlights.

Professional Development of New Higher Education Teachers with Information and Communication Technology in Shanghai: A Kirkpatrick's Evaluation Approach

ERIC Educational Resources Information Center

Wu, Bian; Hu, Yiling; Gu, Xiaoqing; Lim, Cher Ping

2016-01-01

As information and communication technology (ICT) continues to develop, it is essential for teachers to acquire ability for teaching with ICT. In China, new higher education (HE) teachers often lack teaching experience because there are limited teaching opportunities during their postgraduate studies. This status quo may compromise the quality of…

Digital Advances Reshaping K-12 Testing. Technology Counts, 2014. Education Week. Volume 33 Number 25

ERIC Educational Resources Information Center

Edwards, Virginia B., Ed.

2014-01-01

Figuring out how to use digital tools to transform testing requires a willingness to invest in new technologies and the patience to experiment with novel approaches, a commitment to ongoing professional development and reliable technical support, and an openness to learn from mistakes. Whatever bumpy ride this technological journey takes, experts…

Socio-Pedagogical Complex as a Pedagogical Support Technology of Students' Social Adaptation

ERIC Educational Resources Information Center

Sadovaya, Victoriya V.; Simonova, Galina I.

2016-01-01

The relevance of the problem stated in the article is determined by the need of developing technological approaches to pedagogical support of students' social adaptation. The purpose of this paper is to position the technological sequence of pedagogical support of students' social adaptation in the activities of the socio-pedagogical complex. The…

Using Technology to Direct Learning in Higher Education: The Way Forward?

ERIC Educational Resources Information Center

Turney, C. S. M.; Robinson, D.; Lee, M.; Soutar, A.

2009-01-01

Improvements in technology appear to provide an unprecedented opportunity to improve learning and teaching within the higher education system. At present, however, opinions are divided over the efficacy of such an approach and the extent to which technology should be embraced in teaching. Over a period of two years, we have developed a new…

An Analysis of Learners' Intentions toward Virtual Reality Learning Based on Constructivist and Technology Acceptance Approaches

ERIC Educational Resources Information Center

Huang, Hsiu-Mei; Liaw, Shu-Sheng

2018-01-01

Within a constructivist paradigm, the virtual reality technology focuses on the learner's actively interactive learning processes and attempts to reduce the gap between the learner's knowledge and a real-life experience. Recently, virtual reality technologies have been developed for a wide range of applications in education, but further research…

Commercial phosphoric acid fuel cell system technology development

NASA Technical Reports Server (NTRS)

Prokopius, P. R.; Warshay, M.; Simons, S. N.; King, R. B.

1979-01-01

Reducing cost and increasing reliability were the technology drivers in both the electric utility and on-site integrated energy system applications. The longstanding barrier to the attainment of these goals was materials. Differences in approaches and their technological features, including electrodes, matrices, intercell cooling, bipolar/separator plates, electrolyte management, fuel selection, and system design philosophy were discussed.

Thinking beyond Technology: Using the iSkills Assessment as Evidence to Support Institutional ICT Literacy Initiatives

ERIC Educational Resources Information Center

Egan, Teresa; Katz, Irvin R.

2007-01-01

When Educational Testing Service (ETS) was first approached by college librarians, professors, and administrators to develop an assessment of Information and Communication Technology (ICT) literacy, there was a resounding concern: incoming students could use technology for entertainment purposes, but many did not have the ICT literacy skills to do…

Quantification of the Impact of Technological Changes on Human Resources.

ERIC Educational Resources Information Center

Potter, Norman R.; And Others

The capability to predict human resource requirements based on the introduction of new technology has long been a research objective within psychology. The purpose of this study was to develop a procedure for quantifying the effects of incoming technology. A five-step approach was taken and included critical analysis of the recent literature to…

Scientific and Technological Progress, Political Beliefs and Environmental Sustainability

ERIC Educational Resources Information Center

Makrakis, Vassilios

2012-01-01

With the development of science and technology, a basically optimistic ideology of progress has emerged. This deterministic attitude has been challenged in recent decades as a result of harmful side-effects generated by the way technology and science have been approached and used. The study presented here is a part of a larger international and…

Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W.; Laird, Daniel

Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problemmore » solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).« less

Transformational Systems Concepts and Technologies for Our Future in Space

NASA Technical Reports Server (NTRS)

Howell, J. T.; George,P.; Mankins, J. C. (Editor); Christensen, C. B.

2004-01-01

NASA is constantly searching for new ideas and approaches yielding opportunities for assuring maximum returns on space infrastructure investments. Perhaps the idea of transformational innovation in developing space systems is long overdue. However, the concept of utilizing modular space system designs combined with stepping-stone development processes has merit and promises to return several times the original investment since each new space system or component is not treated as a unique and/or discrete design and development challenge. New space systems can be planned and designed so that each builds on the technology of previous systems and provides capabilities to support future advanced systems. Subsystems can be designed to use common modular components and achieve economies of scale, production, and operation. Standards, interoperability, and "plug and play" capabilities, when implemented vigorously and consistently, will result in systems that can be upgraded effectively with new technologies. This workshop explored many building-block approaches via way of example across a broad spectrum of technology discipline areas for potentially transforming space systems and inspiring future innovation. Details describing the workshop structure, process, and results are contained in this Conference Publication.

A methodology to enable rapid evaluation of aviation environmental impacts and aircraft technologies

NASA Astrophysics Data System (ADS)

Becker, Keith Frederick

Commercial aviation has become an integral part of modern society and enables unprecedented global connectivity by increasing rapid business, cultural, and personal connectivity. In the decades following World War II, passenger travel through commercial aviation quickly grew at a rate of roughly 8% per year globally. The FAA's most recent Terminal Area Forecast predicts growth to continue at a rate of 2.5% domestically, and the market outlooks produced by Airbus and Boeing generally predict growth to continue at a rate of 5% per year globally over the next several decades, which translates into a need for up to 30,000 new aircraft produced by 2025. With such large numbers of new aircraft potentially entering service, any negative consequences of commercial aviation must undergo examination and mitigation by governing bodies so that growth may still be achieved. Options to simultaneously grow while reducing environmental impact include evolution of the commercial fleet through changes in operations, aircraft mix, and technology adoption. Methods to rapidly evaluate fleet environmental metrics are needed to enable decision makers to quickly compare the impact of different scenarios and weigh the impact of multiple policy options. As the fleet evolves, interdependencies may emerge in the form of tradeoffs between improvements in different environmental metrics as new technologies are brought into service. In order to include the impacts of these interdependencies on fleet evolution, physics-based modeling is required at the appropriate level of fidelity. Evaluation of environmental metrics in a physics-based manner can be done at the individual aircraft level, but will then not capture aggregate fleet metrics. Contrastingly, evaluation of environmental metrics at the fleet level is already being done for aircraft in the commercial fleet, but current tools and approaches require enhancement because they currently capture technology implementation through post-processing, which does not capture physical interdependencies that may arise at the aircraft-level. The goal of the work that has been conducted here was the development of a methodology to develop surrogate fleet approaches that leverage the capability of physics-based aircraft models and the development of connectivity to fleet-level analysis tools to enable rapid evaluation of fuel burn and emissions metrics. Instead of requiring development of an individual physics-based model for each vehicle in the fleet, the surrogate fleet approaches seek to reduce the number of such models needed while still accurately capturing performance of the fleet. By reducing the number of models, both development time and execution time to generate fleet-level results may also be reduced. The initial steps leading to surrogate fleet formulation were a characterization of the commercial fleet into groups based on capability followed by the selection of a reference vehicle model and a reference set of operations for each group. Next, three potential surrogate fleet approaches were formulated. These approaches include the parametric correction factor approach, in which the results of a reference vehicle model are corrected to match the aggregate results of each group; the average replacement approach, in which a new vehicle model is developed to generate aggregate results of each group, and the best-in-class replacement approach, in which results for a reference vehicle are simply substituted for the entire group. Once candidate surrogate fleet approaches were developed, they were each applied to and evaluated over the set of reference operations. Then each approach was evaluated for their ability to model variations in operations. Finally, the ability of each surrogate fleet approach to capture implementation of different technology suites along with corresponding interdependencies between fuel burn and emissions was evaluated using the concept of a virtual fleet to simulate the technology response of multiple aircraft families. The results of experimentation led to a down selection to the best approach to use to rapidly characterize the performance of the commercial fleet for accurately in the context of acceptability of current fleet evaluation methods. The parametric correction factor and average replacement approaches were shown to be successful in capturing reference fleet results as well as fleet performance with variations in operations. The best-in-class replacement approach was shown to be unacceptable as a model for the larger fleet in each of the scenarios tested. Finally, the average replacement approach was the only one that was successful in capturing the impact of technologies on a larger fleet. These results are meaningful because they show that it is possible to calculate the fuel burn and emissions of a larger fleet with a reduced number of physics-based models within acceptable bounds of accuracy. At the same time, the physics-based modeling also provides the ability to evaluate the impact of technologies on fleet-level fuel burn and emissions metrics. The value of such a capability is that multiple future fleet scenarios involving changes in both aircraft operations and technology levels may now be rapidly evaluated to inform and equip policy makers of the implications of impacts of changes on fleet-level metrics.

Vibration isolation technology - An executive summary of systems development and demonstration. [for proposed microgravity experiments aboard STS and Space Station Freedom

NASA Technical Reports Server (NTRS)

Grodsinsky, C. M.; Logsdon, K. A.; Lubomski, J. F.

1993-01-01

A program was organized to develop the enabling technologies needed for the use of Space Station Freedom as a viable microgravity experimental platform. One of these development programs was the Vibration Isolation Technology (VIT). This technology development program grew because of increased awareness that the acceleration disturbances present on the Space Transportation System (STS) orbiter can and are detrimental to many microgravity experiments proposed for STS, and in the future, Space Station Freedom (SSF). Overall technological organization are covered of the VIT program. Emphasis is given to the results from development and demonstration of enabling technologies to achieve the acceleration requirements perceived as those most likely needed for a variety of microgravity science experiments. In so doing, a brief summary of general theoretical approaches to controlling the acceleration environment of an isolated space based payload and the design and/or performance of two prototype six degree of freedom active magnetic isolation systems is presented.

Optimal technology investment strategies for a reusable launch vehicle

NASA Technical Reports Server (NTRS)

Moore, A. A.; Braun, R. D.; Powell, R. W.

1995-01-01

Within the present budgetary environment, developing the technology that leads to an operationally efficient space transportation system with the required performance is a challenge. The present research focuses on a methodology to determine high payoff technology investment strategies. Research has been conducted at Langley Research Center in which design codes for the conceptual analysis of space transportation systems have been integrated in a multidisciplinary design optimization approach. The current study integrates trajectory, propulsion, weights and sizing, and cost disciplines where the effect of technology maturation on the development cost of a single stage to orbit reusable launch vehicle is examined. Results show that the technology investment prior to full-scale development has a significant economic payoff. The design optimization process is used to determine strategic allocations of limited technology funding to maximize the economic payoff.

Search Pathways: Modeling GeoData Search Behavior to Support Usable Application Development

NASA Astrophysics Data System (ADS)

Yarmey, L.; Rosati, A.; Tressel, S.

2014-12-01

Recent technical advances have enabled development of new scientific data discovery systems. Metadata brokering, linked data, and other mechanisms allow users to discover scientific data of interes across growing volumes of heterogeneous content. Matching this complex content with existing discovery technologies, people looking for scientific data are presented with an ever-growing array of features to sort, filter, subset, and scan through search returns to help them find what they are looking for. This paper examines the applicability of available technologies in connecting searchers with the data of interest. What metrics can be used to track success given shifting baselines of content and technology? How well do existing technologies map to steps in user search patterns? Taking a user-driven development approach, the team behind the Arctic Data Explorer interdisciplinary data discovery application invested heavily in usability testing and user search behavior analysis. Building on earlier library community search behavior work, models were developed to better define the diverse set of thought processes and steps users took to find data of interest, here called 'search pathways'. This research builds a deeper understanding of the user community that seeks to reuse scientific data. This approach ensures that development decisions are driven by clearly articulated user needs instead of ad hoc technology trends. Initial results from this research will be presented along with lessons learned for other discovery platform development and future directions for informatics research into search pathways.

A Review of New and Developing Technology to Significantly Improve Mars Sample-Return Missions

NASA Technical Reports Server (NTRS)

Carsey, F.; Brophy, J.; Gilmore, M.; Rodgers, D.; Wilcox, B.

2000-01-01

A JPL development activity was initiated in FY 1999 for the purpose of examining and evaluating technologies that could materially improve future (i.e., beyond the 2005 launch) Mars sample return missions. The scope of the technology review was comprehensive and end-to-end; the goal was to improve mass, cost, risk, and scientific return. A specific objective was to assess approaches to sample return with only one Earth launch. While the objective of the study was specifically for sample-return, in-situ missions can also benefit from using many of the technologies examined.

A Review of New and Developing Technology to Significantly Improve Mars Sample-Return Missions

NASA Astrophysics Data System (ADS)

Carsey, F.; Brophy, J.; Gilmore, M.; Rodgers, D.; Wilcox, B.

2000-07-01

A JPL development activity was initiated in FY 1999 for the purpose of examining and evaluating technologies that could materially improve future (i.e., beyond the 2005 launch) Mars sample return missions. The scope of the technology review was comprehensive and end-to-end; the goal was to improve mass, cost, risk, and scientific return. A specific objective was to assess approaches to sample return with only one Earth launch. While the objective of the study was specifically for sample-return, in-situ missions can also benefit from using many of the technologies examined.

The Single Crew Module Concept for Exploration

NASA Technical Reports Server (NTRS)

Chambliss, Joe

2012-01-01

Many concepts have been proposed for exploring space. In early 2010 presidential direction called for reconsidering the approach to address changes in exploration destinations, use of new technologies and development of new capabilities to support exploration of space. Considering the proposed new technology and capabilities that NASA was directed to pursue, the single crew module (SCM) concept for a more streamlined approach to the infrastructure and conduct of exploration missions was developed. The SCM concept combines many of the new promising technologies with a central concept of mission architectures that uses a single habitat module for all phases of an exploration mission. Integrating mission elements near Earth and fully fueling them prior to departure of the vicinity of Earth provides the capability of using the single habitat both in transit to an exploration destination and while exploring the destination. The concept employs the capability to return the habitat and interplanetary propulsion system to Earth vicinity so that those elements can be reused on subsequent exploration missions. This paper describes the SCM concept, provides a top level mass estimate for the elements needed and trades the concept against Many concepts have been proposed for exploring space. In early 2010 presidential direction called for reconsidering the approach to address changes in exploration destinations, use of new technologies and development of new capabilities to support exploration of space. Considering the proposed new technology and capabilities that NASA was directed to pursue, the single crew module (SCM) concept for a more streamlined approach to the infrastructure and conduct of exploration missions was developed. The SCM concept combines many of the new promising technologies with a central concept of mission architectures that uses a single habitat module for all phases of an exploration mission. Integrating mission elements near Earth and fully fueling them prior to departure of the vicinity of Earth provides the capability of using the single habitat both in transit to an exploration destination and while exploring the destination. The concept employs the capability to return the habitat and interplanetary propulsion system to Earth vicinity so that those elements can be reused on subsequent exploration missions. This paper describes the SCM concept, provides a top level mass estimate for the elements needed and trades the concept against Constellation approaches for Lunar, Near Earth Asteroid and Mars Surface missions.

Concepts and technology development towards a platform for macroscopic quantum experiments in space

NASA Astrophysics Data System (ADS)

Kaltenbaek, Rainer

Tremendous progress has been achieved in space technology over the last decade. This technological heritage promises enabling applications of quantum technology in space already now or in the near future. Heritage in laser and optical technologies from LISA Pathfinder comprises core technologies required for quantum optical experiments. Low-noise micro-thruster technology from GAIA allows achieving an impressive quality of microgravity, and passive radiative cooling approaches as in the James Webb Space Telescope may be adapted for achieving cryogenic temperatures. Developments like these have rendered space an increasingly attractive platform for quantum-enhanced sensing and for fundamental tests of physics using quantum technology. In particular, there already have been significant efforts towards ralizing atom interferometry and atomic clocks in space as well as efforts to harness space as an environment for fundamental tests of physics using quantum optomechanics and high-mass matter-wave interferometry. Here, we will present recent efforts in spacecraft design and technology development towards this latter goal in the context of the mission proposal MAQRO.

Advances in health informatics education: educating students at the intersection of health care and information technology.

PubMed

Kushniruk, Andre; Borycki, Elizabeth; Armstrong, Brian; Kuo, Mu-Hsing

2012-01-01

The paper describes the authors' work in the area of health informatics (HI) education involving emerging health information technologies. A range of information technologies promise to modernize health care. Foremost among these are electronic health records (EHRs), which are expected to significantly improve and streamline health care practice. Major national and international efforts are currently underway to increase EHR adoption. However, there have been numerous issues affecting the widespread use of such information technology, ranging from a complex array of technical problems to social issues. This paper describes work in the integration of information technologies directly into the education and training of HI students at both the undergraduate and graduate level. This has included work in (a) the development of Web-based computer tools and platforms to allow students to have hands-on access to the latest technologies and (b) development of interdisciplinary educational models that can be used to guide integrating information technologies into HI education. The paper describes approaches that allow for remote hands-on access by HI students to a range of EHRs and related technology. To date, this work has been applied in HI education in a variety of ways. Several approaches for integration of this essential technology into HI education and training are discussed, along with future directions for the integration of EHR technology into improving and informing the education of future health and HI professionals.

USAF (United States Air Force) Avionics Master Plan.

DTIC Science & Technology

1982-12-01

is updated annually by MAPG activities to reflect changes in emphasis resulting from new direction, threat developments , and other armament and...many different kinds of functional electronic subsystems, a building block approach to the development of new subsystems can be taken. This approach...technologies targeted for precision all weather weapon delivery. A new program will develop the capability to detect and locate ground moving targets not

The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2014-01-01

This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

Horizon Missions Methodology - Using new paradigms to overcome conceptual blocks to innovation

NASA Technical Reports Server (NTRS)

Anderson, John L.

1993-01-01

The Horizon Mission Methodology was developed to provide a systematic analytical approach for evaluating and identifying technological requirements for breakthrough technology options (BTOs) and for assessing their potential to provide revolutionary capabilities for advanced space missions. Here, attention is given to the further use of the methodology as a new tool for a broader range of studies dealing with technology innovation and new technology paradigms.

International Drug Discovery Science and Technology--BIT's Seventh Annual Congress.

PubMed

Bodovitz, Steven

2010-01-01

BIT's Seventh Annual International Drug Discovery Science and Technology Congress, held in Shanghai, included topics covering new therapeutic and technological developments in the field of drug discovery. This conference report highlights selected presentations on open-access approaches to R&D, novel and multifactorial targets, and technologies that assist drug discovery. Investigational drugs discussed include the anticancer agents astuprotimut-r (GlaxoSmithKline plc) and AS-1411 (Antisoma plc).

Large Space Systems Technology, Part 2, 1981

NASA Technical Reports Server (NTRS)

Boyer, W. J. (Compiler)

1982-01-01

Four major areas of interest are covered: technology pertinent to large antenna systems; technology related to the control of large space systems; basic technology concerning structures, materials, and analyses; and flight technology experiments. Large antenna systems and flight technology experiments are described. Design studies, structural testing results, and theoretical applications are presented with accompanying validation data. These research studies represent state-of-the art technology that is necessary for the development of large space systems. A total systems approach including structures, analyses, controls, and antennas is presented as a cohesive, programmatic plan for large space systems.

Innovations in Mission Architectures for Human and Robotic Exploration Beyond Low Earth Orbit

NASA Technical Reports Server (NTRS)

Cooke, Douglas R.; Joosten, B. Kent; Lo, Martin W.; Ford, Ken; Hansen, Jack

2002-01-01

Through the application of advanced technologies, mission concepts, and new ideas in combining capabilities, architectures for missions beyond Earth orbit have been dramatically simplified. These concepts enable a stepping stone approach to discovery driven, technology enabled exploration. Numbers and masses of vehicles required are greatly reduced, yet enable the pursuit of a broader range of objectives. The scope of missions addressed range from the assembly and maintenance of arrays of telescopes for emplacement at the Earth-Sun L2, to Human missions to asteroids, the moon and Mars. Vehicle designs are developed for proof of concept, to validate mission approaches and understand the value of new technologies. The stepping stone approach employs an incremental buildup of capabilities; allowing for decision points on exploration objectives. It enables testing of technologies to achieve greater reliability and understanding of costs for the next steps in exploration.

The Creation and Application of Two Innovative Real-Time Delphi and Cross-Impact Simulation Approaches to Forecast the Future: Forecasting High-Speed Broadband Developments for the State of Hawai`i

ERIC Educational Resources Information Center

Bergo, Rolv Alexander

2013-01-01

Technology development is moving rapidly and our dependence on information services is growing. Building a broadband infrastructure that can support future demand and change is therefore critical to social, political, economic and technological developments. It is often up to local policy makers to find the best solutions to support this demand…

Remediation Technology Collaboration Development

NASA Technical Reports Server (NTRS)

Mahoney, John; Olsen, Wade

2010-01-01

This slide presentation reviews programs at NASA aimed at development at Remediation Technology development for removal of environmental pollutants from NASA sites. This is challenging because there are many sites with different environments, and various jurisdictions and regulations. There are also multiple contaminants. There must be different approaches based on location and type of contamination. There are other challenges: such as costs, increased need for resources and the amount of resources available, and a regulatory environment that is increasing.

NREL/Boeing Spectrolab Team Wins Research and Development Award | News |

Science.gov Websites

approach represents a powerful new technology for designing super-efficient multi-junction solar cells. The results in superior electrical performance. But, with the HEMM approach, the atoms are unevenly spaced

Instrumental and Documentational Approaches: From Technology Use to Documentation Systems in University Mathematics Education

ERIC Educational Resources Information Center

Gueudet, Ghislaine; Buteau, Chantal; Mesa, Vilma; Misfeldt, Morten

2014-01-01

In this article we present an "instrumental approach" in mathematics education, which focuses on the interactions between students, teachers, and "artefacts." This approach analyses "mediations" attached to the use of a given artefact and "instruments" developed by the subjects from this artefact along…

Fused deposition of ceramics: A comprehensive experimental, analytical and computational study of material behavior, fabrication process and equipment design

NASA Astrophysics Data System (ADS)

Bellini, Anna

Customer-driven product customization and continued demand for cost and time savings have generated a renewed interest in agile manufacturing based on improvements on Rapid Prototyping (RP) technologies. The advantages of RP technologies are: (1) ability to shorten the product design and development time, (2) suitability for automation and decrease in the level of human intervention, (3) ability to build many geometrically complex shapes. A shift from "prototyping" to "manufacturing" necessitates the following improvements: (1) Flexibility in choice of materials; (2) Part integrity and built-in characteristics to meet performance requirements; (3) Dimensional stability and tolerances; (4) Improved surface finish. A project funded by ONR has been undertaken to develop an agile manufacturing technology for fabrication of ceramic and multi-component parts to meet various needs of the Navy, such as transducers, etc. The project is based on adaptation of a layered manufacturing concept since the program required that the new technology be developed based on a commercially available RP technology. Among various RP technologies available today, Fused Deposition Modeling (FDM) has been identified as the focus of this research because of its potential versatility in the choice of materials and deposition configuration. This innovative approach allows for designing and implementing highly complex internal architectures into parts through deposition of different materials in a variety of configurations in such a way that the finished product exhibit characteristics to meet the performance requirements. This implies that, in principle, one can tailor-make the assemble of materials and structures as per specifications of an optimum design. The program objectives can be achieved only through accurate process modeling and modeling of material behavior. Oftentimes, process modeling is based on some type of computational approach where as modeling of material behavior is based on extensive experimental investigations. Studies are conducted in the following categories: (1) Flow modeling during extrusion and deposition; (2) Thermal modeling; (3) Flow control during deposition; (4) Product characterization and property determination for dimensional analysis; (5) Development of a novel technology based on a mini-extrusion system. Studies in each of these stages have involved experimental as well as analytical approaches to develop a comprehensive modeling.

Higher education technological knowledge and patterns of technology adoptions in undergraduate STEM courses

NASA Astrophysics Data System (ADS)

Ali, Zarka Asghar

Identifying, examining, and understanding faculty members' technological knowledge development and the process of technology adoption in higher education is a multifaceted process. Past studies have used Rogers (1995, 2003) diffusion of innovation theoretical framework to delineate the technology adoption process. These studies, however, have frequently reported the influencing factors based on the statistical analysis such as regression analysis-based approach, and have not focused on the emerging process of technology adoptions or the developing process of technological knowledge and pedagogical knowledge. A mixed method study was designed to see how faculty members acquire different technologies and develop technological knowledge that might help them adopt technologies in their classrooms and online using different pedagogies. A sample of STEM teaching faculty members with different ranks, tenure, teaching experience, and varied degree of experience in the use of educational technologies participated in the study. A survey was designed to identify internal and external factors affecting technology adoption and its effective use in different teaching activities. To elaborate survey results, the study also included class observations as well as pre- and post-observation interviews. Online classrooms used by the faculty via Blackboard learning management system, online flipped classrooms, or other websites such as Piazza were also examined for data triangulation. The findings of the study indicate that faculty members are influenced by their own professional motivations and student learning to improve their teaching methods and to enhance student interactions and learning through the use of different educational technologies. The adoption process was identified as spreading over a period of time and it looked at how faculty members' developed their technological knowledge and pedagogical knowledge. With the recognition of the social, organizational, and professional motivational factors both expert faculty members, university administrators, and technologist could be made aware of the critical components necessary to construct and support a bottom-up or user-centric successful innovation adoption decision process. The bottom-up approach would use expert professors as change agents and educational designers that would encourage exchanges and meaningful dialogues about educational technology adoptions and effective uses of technology with pedagogy within each discipline and department.

Designing eHealth that Matters via a Multidisciplinary Requirements Development Approach

PubMed Central

Wentzel, Jobke; Van Gemert-Pijnen, Julia EWC

2013-01-01

Background Requirements development is a crucial part of eHealth design. It entails all the activities devoted to requirements identification, the communication of requirements to other developers, and their evaluation. Currently, a requirements development approach geared towards the specifics of the eHealth domain is lacking. This is likely to result in a mismatch between the developed technology and end user characteristics, physical surroundings, and the organizational context of use. It also makes it hard to judge the quality of eHealth design, since it makes it difficult to gear evaluations of eHealth to the main goals it is supposed to serve. Objective In order to facilitate the creation of eHealth that matters, we present a practical, multidisciplinary requirements development approach which is embedded in a holistic design approach for eHealth (the Center for eHealth Research roadmap) that incorporates both human-centered design and business modeling. Methods Our requirements development approach consists of five phases. In the first, preparatory, phase the project team is composed and the overall goal(s) of the eHealth intervention are decided upon. Second, primary end users and other stakeholders are identified by means of audience segmentation techniques and our stakeholder identification method. Third, the designated context of use is mapped and end users are profiled by means of requirements elicitation methods (eg, interviews, focus groups, or observations). Fourth, stakeholder values and eHealth intervention requirements are distilled from data transcripts, which leads to phase five, in which requirements are communicated to other developers using a requirements notation template we developed specifically for the context of eHealth technologies. Results The end result of our requirements development approach for eHealth interventions is a design document which includes functional and non-functional requirements, a list of stakeholder values, and end user profiles in the form of personas (fictitious end users, representative of a primary end user group). Conclusions The requirements development approach presented in this article enables eHealth developers to apply a systematic and multi-disciplinary approach towards the creation of requirements. The cooperation between health, engineering, and social sciences creates a situation in which a mismatch between design, end users, and the organizational context can be avoided. Furthermore, we suggest to evaluate eHealth on a feature-specific level in order to learn exactly why such a technology does or does not live up to its expectations. PMID:23796508

A New Strategic Approach to Technology Transfer

USDA-ARS?s Scientific Manuscript database

The principal goal of Federal research and development (R&D) is to solve problems for public benefit. Technology transfer, innovation, entrepreneurship: words and concepts that once belonged exclusively in the domain of private research enterprises, have quickly become part of everyday lexicon in Fe...

Assistive technology to help persons in a minimally conscious state develop responding and stimulation control: Performance assessment and social rating.

PubMed

Lancioni, Giulio E; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; D'Amico, Fiora; Buonocunto, Francesca; Navarro, Jorge; Lanzilotti, Crocifissa; Fiore, Piero; Megna, Marisa; Damiani, Sabino

2015-01-01

Post-coma persons in a minimally conscious state (MCS) and with extensive motor impairment and lack of speech tend to be passive and isolated. This study aimed to (a) further assess a technology-aided approach for fostering MCS participants' responding and stimulation control and (b) carry out a social validation check about the approach. Eight MCS participants were exposed to the aforementioned approach according to an ABAB design. The technology included optic, pressure or touch microswitches to monitor eyelid, hand or finger responses and a computer system that allowed those responses to produce brief periods of positive stimulation during the B (intervention) phases of the study. Eighty-four university psychology students and 42 care and health professionals were involved in the social validation check. The MCS participants showed clear increases in their response frequencies, thus producing increases in their levels of environmental stimulation input, during the B phases of the study. The students and care and health professionals involved in the social validation check rated the technology-aided approach more positively than a control condition in which stimulation was automatically presented to the participants. A technology-aided approach to foster responding and stimulation control in MCS persons may be effective and socially desirable.

Recent advances in inkjet dispensing technologies: applications in drug discovery.

PubMed

Zhu, Xiangcheng; Zheng, Qiang; Yang, Hu; Cai, Jin; Huang, Lei; Duan, Yanwen; Xu, Zhinan; Cen, Peilin

2012-09-01

Inkjet dispensing technology is a promising fabrication methodology widely applied in drug discovery. The automated programmable characteristics and high-throughput efficiency makes this approach potentially very useful in miniaturizing the design patterns for assays and drug screening. Various custom-made inkjet dispensing systems as well as specialized bio-ink and substrates have been developed and applied to fulfill the increasing demands of basic drug discovery studies. The incorporation of other modern technologies has further exploited the potential of inkjet dispensing technology in drug discovery and development. This paper reviews and discusses the recent developments and practical applications of inkjet dispensing technology in several areas of drug discovery and development including fundamental assays of cells and proteins, microarrays, biosensors, tissue engineering, basic biological and pharmaceutical studies. Progression in a number of areas of research including biomaterials, inkjet mechanical systems and modern analytical techniques as well as the exploration and accumulation of profound biological knowledge has enabled different inkjet dispensing technologies to be developed and adapted for high-throughput pattern fabrication and miniaturization. This in turn presents a great opportunity to propel inkjet dispensing technology into drug discovery.

Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ternes, MP

A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use ofmore » the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.« less

Rapid E-learning Development Strategies and a Multimedia Project Design Model

ERIC Educational Resources Information Center

Sözcü, Ömer Faruk; Ipek, Ismail

2014-01-01

The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training…

COTS-based OO-component approach for software inter-operability and reuse (software systems engineering methodology)

NASA Technical Reports Server (NTRS)

Yin, J.; Oyaki, A.; Hwang, C.; Hung, C.

2000-01-01

The purpose of this research and study paper is to provide a summary description and results of rapid development accomplishments at NASA/JPL in the area of advanced distributed computing technology using a Commercial-Off--The-Shelf (COTS)-based object oriented component approach to open inter-operable software development and software reuse.

From a Disciplinary to an Interdisciplinary Design Research: Developing an Integrative Approach for Design

ERIC Educational Resources Information Center

Chou, Wen Huei; Wong, Ju-Joan

2015-01-01

As the new generation of designers face more complex design issues, the forms of design research start to shift towards a user-centred approach to problem-solving. The cooperation and communication among various fields and specialisations are becoming more complex; in many practical design cases, in particular, technology developers face…

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd-generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Systems Engineering Approach to Technology Integration for NASA's 2nd Generation Reusable Launch Vehicle

NASA Technical Reports Server (NTRS)

Thomas, Dale; Smith, Charles; Thomas, Leann; Kittredge, Sheryl

2002-01-01

The overall goal of the 2nd Generation RLV Program is to substantially reduce technical and business risks associated with developing a new class of reusable launch vehicles. NASA's specific goals are to improve the safety of a 2nd generation system by 2 orders of magnitude - equivalent to a crew risk of 1-in-10,000 missions - and decrease the cost tenfold, to approximately $1,000 per pound of payload launched. Architecture definition is being conducted in parallel with the maturating of key technologies specifically identified to improve safety and reliability, while reducing operational costs. An architecture broadly includes an Earth-to-orbit reusable launch vehicle, on-orbit transfer vehicles and upper stages, mission planning, ground and flight operations, and support infrastructure, both on the ground and in orbit. The systems engineering approach ensures that the technologies developed - such as lightweight structures, long-life rocket engines, reliable crew escape, and robust thermal protection systems - will synergistically integrate into the optimum vehicle. To best direct technology development decisions, analytical models are employed to accurately predict the benefits of each technology toward potential space transportation architectures as well as the risks associated with each technology. Rigorous systems analysis provides the foundation for assessing progress toward safety and cost goals. The systems engineering review process factors in comprehensive budget estimates, detailed project schedules, and business and performance plans, against the goals of safety, reliability, and cost, in addition to overall technical feasibility. This approach forms the basis for investment decisions in the 2nd Generation RLV Program's risk-reduction activities. Through this process, NASA will continually refine its specialized needs and identify where Defense and commercial requirements overlap those of civil missions.

Does Educational Development Matter?

ERIC Educational Resources Information Center

Knapper, Christopher

2016-01-01

This essay provides reflections on the growth and influence of educational development, and the changes in approaches to teaching in universities. It also identifies some areas in which educational development and developers face challenges for the future, including educational technology, leadership and resistance to change.

Human organomics: a fresh approach to understanding human development using single-cell transcriptomics.

PubMed

Camp, J Gray; Treutlein, Barbara

2017-05-01

Innovative methods designed to recapitulate human organogenesis from pluripotent stem cells provide a means to explore human developmental biology. New technologies to sequence and analyze single-cell transcriptomes can deconstruct these 'organoids' into constituent parts, and reconstruct lineage trajectories during cell differentiation. In this Spotlight article we summarize the different approaches to performing single-cell transcriptomics on organoids, and discuss the opportunities and challenges of applying these techniques to generate organ-level, mechanistic models of human development and disease. Together, these technologies will move past characterization to the prediction of human developmental and disease-related phenomena. © 2017. Published by The Company of Biologists Ltd.

The component alignment model: a new approach to health care information technology strategic planning.

PubMed

Martin, J B; Wilkins, A S; Stawski, S K

1998-08-01

The evolving health care environment demands that health care organizations fully utilize information technologies (ITs). The effective deployment of IT requires the development and implementation of a comprehensive IT strategic plan. A number of approaches to health care IT strategic planning exist, but they are outdated or incomplete. The component alignment model (CAM) introduced here recognizes the complexity of today's health care environment, emphasizing continuous assessment and realignment of seven basic components: external environment, emerging ITs, organizational infrastructure, mission, IT infrastructure, business strategy, and IT strategy. The article provides a framework by which health care organizations can develop an effective IT strategic planning process.

Advanced on-site power plant development technology program

NASA Technical Reports Server (NTRS)

1984-01-01

A 30-cell, full area short stack containing advanced cell features was tested for 2900 hours. A stack acid addition approach was selected and will be evaluated on the stack at 5000 hours test time. A brassboard inverter was designed and fabrication was initiated. Evaluation of this brassboard inverter will take place in 1984. A Teflon coated commercial heat exchanger was selected as the preferred approach for the acid condenser. A reformer catalyst with significantly less pressure drop and equivalent performance relative to the 40-K baseline catalyst was selected for the development reformer. The early 40-kW field power plant history was reviewed and adjustments were made to the On-Site Technology Development Program to address critical component issues.

A review of the design and development processes of simulation for training in healthcare - A technology-centered versus a human-centered perspective.

PubMed

Persson, Johanna

2017-01-01

This article reviews literature about simulation systems for training in healthcare regarding the prevalence of human-centered approaches in the design and development of these systems, motivated by a tradition in this field of working technology-centered. The results show that the focus on human needs and context of use is limited. It is argued that a reduction of the focus on technical advancements in favor of the needs of the users and the healthcare community, underpinned by human factors and ergonomics theory, is favorable. Due to the low number of identified articles describing or discussing human-centered approaches it is furthermore concluded that the publication culture promotes technical descriptions and summative evaluations rather than descriptions and reflections regarding the design and development processes. Shifting the focus from a technology-centered approach to a human-centered one can aid in the process of creating simulation systems for training in healthcare that are: 1) relevant to the learning objectives, 2) adapted to the needs of users, context and task, and 3) not selected based on technical or fidelity criteria. Copyright © 2016 Elsevier Ltd. All rights reserved.

Key Health Information Technologies and Related Issues for Iran: A Qualitative Study.

PubMed

Hemmat, Morteza; Ayatollahi, Haleh; Maleki, Mohammadreza; Saghafi, Fatemeh

2018-01-01

Planning for the future of Health Information Technology (HIT) requires applying a systematic approach when conducting foresight studies. The aim of this study was to identify key health information technologies and related issues for Iran until 2025. This was a qualitative study and the participants included experts and policy makers in the field of health information technology. In-depth semi-structured interviews were conducted and data were analyzed by using framework analysis and MAXQDA software. The findings revealed that the development of national health information network, electronic health records, patient health records, a cloud-based service center, interoperability standards, patient monitoring technologies, telehealth, mhealth, clinical decision support systems, health information technology and mhealth infrastructure were found to be the key technologies for the future. These technologies could influence the economic, organizational and individual levels. To achieve them, the economic and organizational obstacles need to be overcome. In this study, a number of key technologies and related issues were identified. This approach can help to focus on the most important technologies in the future and to priorities these technologies for better resource allocation and policy making.

State of the Art: Novel Applications for Cortical Stimulation.

PubMed

De Ridder, Dirk; Perera, Sanjaya; Vanneste, Sven

2017-04-01

Electrical stimulation via implanted electrodes that overlie the cortex of the brain is an upcoming neurosurgical technique that was hindered for a long time by insufficient knowledge of how the brain functions in a dynamic, physiological, and pathological way, as well as by technological limitations of the implantable stimulation devices. This paper provides an overview of cortex stimulation via implantable devices and introduces future possibilities to improve cortex stimulation. Cortex stimulation was initially used preoperatively as a technique to localize functions in the brain and only later evolved into a treatment technique. It was first used for pain, but more recently a multitude of pathologies are being targeted by cortex stimulation. These disorders are being treated by stimulating different cortical areas of the brain. Risks and complications are essentially similar to those related to deep brain stimulation and predominantly include haemorrhage, seizures, infection, and hardware failures. For cortex stimulation to fully mature, further technological development is required to predict its outcomes and improve stimulation designs. This includes the development of network science-based functional connectivity approaches, genetic analyses, development of navigated high definition transcranial alternating current stimulation, and development of pseudorandom stimulation designs for preventing habituation. In conclusion, cortex stimulation is a nascent but very promising approach to treating a variety of diseases, but requires further technological development for predicting outcomes, such as network science based functional connectivity approaches, genetic analyses, development of navigated transcranial electrical stimulation, and development of pseudorandom stimulation designs for preventing habituation. © 2017 International Neuromodulation Society.

Teaching technological innovation and entrepreneurship in polymeric biomaterials.

PubMed

Washburn, Newell R

2011-01-01

A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students' grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. Copyright © 2010 Wiley Periodicals, Inc.

Teaching Technological Innovation and Entrepreneurship in Polymeric Biomaterials

PubMed Central

Washburn, Newell R.

2010-01-01

A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students’ grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. PMID:20949575

The NUTS CubeSat Project: Spin-Offs and Technology Development

NASA Astrophysics Data System (ADS)

Birkeland, R.; Stein, T. A.; Tommer, M.; Beermann, B.; Petrasch, J.; Gjersvik, A.

2015-09-01

The development of CubeSats allows for the conception and implementation of new approaches and technologies. In this paper we present a spin-off and technology innovation resulting from the NTNU Test Satellite (NUTS). NUTS is a 2U CubeSat under development by students of the Norwegian University of Science and Technology (NTNU) in Trondheim, Norway. The satellite is due to launch in 2017 and is based upon in-house developments. We will describe the innovative carbon-fibre frame, radio systems and proposals for an infrared camera for atmospheric gravity waves observations. A NUTS spinoff, the Cosmic Particle Telescope (CPT-SCOPE), will be presented in greater detail since it has been selected for the BEXUS 20 campaign in autumn 2015. CPT-SCOPE is a Norwegian-German compact radiation monitor prototype developed by students.

Environmental Management vitrification activities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krumrine, P.H.

1996-05-01

Both the Mixed Waste and Landfill Stabilization Focus Areas as part of the Office of Technology Development efforts within the Department of Energy`s (DOE) Environmental Management (EM) Division have been developing various vitrification technologies as a treatment approach for the large quantities of transuranic (TRU), TRU mixed and Mixed Low Level Wastes that are stored in either landfills or above ground storage facilities. The technologies being developed include joule heated, plasma torch, plasma arc, induction, microwave, combustion, molten metal, and in situ methods. There are related efforts going into development glass, ceramic, and slag waste form windows of opportunity formore » the diverse quantities of heterogeneous wastes needing treatment. These studies look at both processing parameters, and long term performance parameters as a function of composition to assure that developed technologies have the right chemistry for success.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Carmack; L. Braase; F. Goldner

The mission of the Advanced Fuels Campaign (AFC) is to perform Research, Development, and Demonstration (RD&D) activities for advanced fuel forms (including cladding) to enhance the performance and safety of the nation’s current and future reactors, enhance proliferation resistance of nuclear fuel, effectively utilize nuclear energy resources, and address the longer-term waste management challenges. This includes development of a state of the art Research and Development (R&D) infrastructure to support the use of a “goal oriented science based approach.” AFC uses a “goal oriented, science based approach” aimed at a fundamental understanding of fuel and cladding fabrication methods and performancemore » under irradiation, enabling the pursuit of multiple fuel forms for future fuel cycle options. This approach includes fundamental experiments, theory, and advanced modeling and simulation. One of the most challenging aspects of AFC is the management, integration, and coordination of major R&D activities across multiple organizations. AFC interfaces and collaborates with Fuel Cycle Technologies (FCT) campaigns, universities, industry, various DOE programs and laboratories, federal agencies (e.g., Nuclear Regulatory Commission [NRC]), and international organizations. Key challenges are the development of fuel technologies to enable major increases in fuel performance (safety, reliability, power and burnup) beyond current technologies, and development of characterization methods and predictive fuel performance models to enable more efficient development and licensing of advanced fuels. Challenged with the research and development of fuels for two different reactor technology platforms, AFC targeted transmutation fuel development and focused ceramic fuel development for Advanced LWR Fuels.« less

Companies Claim to Fame and their scientific challenges in vaccine development.

PubMed

Boon, Louis

2009-02-21

Although basic scientific immunological knowledge is the foundation for the development of novel vaccination approaches, beyond proof of concept in animal models, translational scientific immunological efforts are obligatory for successful development of a vaccine for use in humans. Translational technology is developed/used by biotechnology companies to generate better, safer or cheaper vaccines. Their proprietary position and/or proprietary technology are the basis of services that they offer to other companies or for products that they develop themselves. Some of the translational challenges are described in this review. In addition, a number of novel technologies developed by several biotechnology companies in The Netherlands are described. This document however, is far from complete and highlights only a small part of it.

Status of NO sub x control for coal-fired power plants

NASA Technical Reports Server (NTRS)

Teixeira, D. P.

1978-01-01

The status of technologies for controlling emissions of oxides of nitrogen (NOx) from coal-fired power plants is reviewed. A discussion of current technology as well as future NOx control approaches is presented. Advanced combustion approaches are included as well as post-combustion alternatives such as catalytic and noncatalytic ammonia-bases systems and wet scrubbing. Special emphasis is given to unresolved development issues as they relate to practical applications on coal-fired power plants.

Evaluation Criteria for Solid Waste Processing Research and Technology Development

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, J. A.; Alazraki, M. P.

2001-01-01

A preliminary list of criteria is proposed for evaluation of solid waste processing technologies for research and technology development (R&TD) in the Advanced Life Support (ALS) Program. Completion of the proposed list by current and prospective ALS technology developers, with regard to specific missions of interest, may enable identification of appropriate technologies (or lack thereof) and guide future development efforts for the ALS Program solid waste processing area. An attempt is made to include criteria that capture information about the technology of interest as well as its system-wide impacts. Some of the criteria in the list are mission-independent, while the majority are mission-specific. In order for technology developers to respond to mission-specific criteria, critical information must be available on the quantity, composition and state of the waste stream, the wast processing requirements, as well as top-level mission scenario information (e.g. safety, resource recovery, planetary protection issues, and ESM equivalencies). The technology readiness level (TRL) determines the degree to which a technology developer is able to accurately report on the list of criteria. Thus, a criteria-specific minimum TRL for mandatory reporting has been identified for each criterion in the list. Although this list has been developed to define criteria that are needed to direct funding of solid waste processing technologies, this list processes significant overlap in criteria required for technology selection for inclusion in specific tests or missions. Additionally, this approach to technology evaluation may be adapted to other ALS subsystems.

New Technologies for Rapid Bacterial Identification and Antibiotic Resistance Profiling.

PubMed

Kelley, Shana O

2017-04-01

Conventional approaches to bacterial identification and drug susceptibility testing typically rely on culture-based approaches that take 2 to 7 days to return results. The long turnaround times contribute to the spread of infectious disease, negative patient outcomes, and the misuse of antibiotics that can contribute to antibiotic resistance. To provide new solutions enabling faster bacterial analysis, a variety of approaches are under development that leverage single-cell analysis, microfluidic concentration and detection strategies, and ultrasensitive readout mechanisms. This review discusses recent advances in this area and the potential of new technologies to enable more effective management of infectious disease.

Radiation Hardened Electronics for Extreme Environments

NASA Technical Reports Server (NTRS)

Keys, Andrew S.; Watson, Michael D.

2007-01-01

The Radiation Hardened Electronics for Space Environments (RHESE) project consists of a series of tasks designed to develop and mature a broad spectrum of radiation hardened and low temperature electronics technologies. Three approaches are being taken to address radiation hardening: improved material hardness, design techniques to improve radiation tolerance, and software methods to improve radiation tolerance. Within these approaches various technology products are being addressed including Field Programmable Gate Arrays (FPGA), Field Programmable Analog Arrays (FPAA), MEMS Serial Processors, Reconfigurable Processors, and Parallel Processors. In addition to radiation hardening, low temperature extremes are addressed with a focus on material and design approaches.