Integrated Technology Assessment Center (ITAC) Update

NASA Technical Reports Server (NTRS)

Taylor, J. L.; Neely, M. A.; Curran, F. M.; Christensen, E. R.; Escher, D.; Lovell, N.; Morris, Charles (Technical Monitor)

2002-01-01

The Integrated Technology Assessment Center (ITAC) has developed a flexible systems analysis framework to identify long-term technology needs, quantify payoffs for technology investments, and assess the progress of ASTP-sponsored technology programs in the hypersonics area. For this, ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. Concepts for transportation systems are selected based on relevance to the ASTP and integrated concept models (ICM) of these concepts are developed. Key technologies of interest are identified and projections are made of their characteristics with respect to their impacts on key aspects of the specific concepts of interest. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework in ModelCenter. This framework permits rapid sensitivity analysis, single point design assessment, and a full probabilistic assessment of each concept with respect to both embedded and enhancing technologies. Probabilistic outputs are weighed against metrics of interest to ASTP using a multivariate decision making process to provide inputs for technology prioritization within the ASTP. ITAC program is currently finishing the assessment of a two-stage-to-orbit (TSTO), rocket-based combined cycle (RBCC) concept and a TSTO turbine-based combined cycle (TBCC) concept developed by the team with inputs from NASA. A baseline all rocket TSTO concept is also being developed for comparison. Boeing has recently submitted a performance model for their Flexible Aerospace System Solution for Tomorrow (FASST) concept and the ISAT program will provide inputs for a single-stage-to-orbit (SSTO) TBCC based concept in the near-term. Both of these latter concepts will be analyzed within the ITAC framework over the summer. This paper provides a status update of the ITAC program.

Emerging Use of Early Health Technology Assessment in Medical Product Development: A Scoping Review of the Literature.

PubMed

IJzerman, Maarten J; Koffijberg, Hendrik; Fenwick, Elisabeth; Krahn, Murray

2017-07-01

Early health technology assessment is increasingly being used to support health economic evidence development during early stages of clinical research. Such early models can be used to inform research and development about the design and management of new medical technologies to mitigate the risks, perceived by industry and the public sector, associated with market access and reimbursement. Over the past 25 years it has been suggested that health economic evaluation in the early stages may benefit the development and diffusion of medical products. Early health technology assessment has been suggested in the context of iterative economic evaluation alongside phase I and II clinical research to inform clinical trial design, market access, and pricing. In addition, performing early health technology assessment was also proposed at an even earlier stage for managing technology portfolios. This scoping review suggests a generally accepted definition of early health technology assessment to be "all methods used to inform industry and other stakeholders about the potential value of new medical products in development, including methods to quantify and manage uncertainty". The present review also aimed to identify recent published empirical studies employing an early-stage assessment of a medical product. With most included studies carried out to support a market launch, the dominant methodology was early health economic modeling. Further methodological development is required, in particular, by combining systems engineering and health economics to manage uncertainty in medical product portfolios.

Problem Solving in Technology-Rich Environments. A Report from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2007-466

ERIC Educational Resources Information Center

Bennett, Randy Elliot; Persky, Hilary; Weiss, Andrew R.; Jenkins, Frank

2007-01-01

The Problem Solving in Technology-Rich Environments (TRE) study was designed to demonstrate and explore innovative use of computers for developing, administering, scoring, and analyzing the results of National Assessment of Educational Progress (NAEP) assessments. Two scenarios (Search and Simulation) were created for measuring problem solving…

The Development of Technology for Higher Education Institution's Administrative Personnel Assessment

ERIC Educational Resources Information Center

Bakhtina, Olga Yurevna; Kirillov, Andrey Vladimirovich; Matyash, Sergey Askoldovich; Urzha, Olga Aleksandrovna

2015-01-01

The main approaches for development of assessment technology of higher education institution's administrative personnel are considered in this article. Alongside with it the following is defined: purposes, formation principles, indicators and criteria of the assessment system, rating scale, the procedure and order of assessment process of higher…

Decision Gate Process for Assessment of a Technology Development Portfolio

NASA Technical Reports Server (NTRS)

Kohli, Rajiv; Fishman, Julianna; Hyatt, Mark

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to TRL 6 development level) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, which will reduce life cycle cost and risk, and will increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product is either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

ECITE: A Testbed for Assessment of Technology Interoperability and Integration wiht Architecture Components

NASA Astrophysics Data System (ADS)

Graves, S. J.; Keiser, K.; Law, E.; Yang, C. P.; Djorgovski, S. G.

2016-12-01

ECITE (EarthCube Integration and Testing Environment) is providing both cloud-based computational testing resources and an Assessment Framework for Technology Interoperability and Integration. NSF's EarthCube program is funding the development of cyberinfrastructure building block components as technologies to address Earth science research problems. These EarthCube building blocks need to support integration and interoperability objectives to work towards a coherent cyberinfrastructure architecture for the program. ECITE is being developed to provide capabilities to test and assess the interoperability and integration across funded EarthCube technology projects. EarthCube defined criteria for interoperability and integration are applied to use cases coordinating science problems with technology solutions. The Assessment Framework facilitates planning, execution and documentation of the technology assessments for review by the EarthCube community. This presentation will describe the components of ECITE and examine the methodology of cross walking between science and technology use cases.

Supply Chain Sustainability Analysis of Whole Algae Hydrothermal Liquefaction and Upgrading

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pegallapati, Ambica Koushik; Dunn, Jennifer B.; Frank, Edward D.

2015-04-01

The Department of Energy's Bioenergy Technology Office (BETO) collaborates with a wide range of institutions towards the development and deployment of biofuels and bioproducts. To facilitate this effort, BETO and its partner national laboratories develop detailed techno-economic assessments (TEA) of biofuel production technologies as part of the development of design cases and state of technology (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand,more » an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available. (SOT) analyses. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables preliminary identification of data gaps and research and development needs and provides goals and targets against which technology progress is assessed. On the other hand, an SOT analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases and includes technical, economic, and environmental criteria as available.« less

The Value of Clinical Needs Assessments for Point-of-Care Diagnostics

PubMed Central

Weigl, Bernhard H.; Gaydos, Charlotte A.; Kost, Gerald; Beyette, Fred R.; Sabourin, Stephanie; Rompalo, Anne; de los Santos, Tala; McMullan, Jason T.; Haller, John

2013-01-01

Most entrepreneurial ventures fail long before the core technology can be brought to the marketplace because of disconnects in performance and usability measures such as accuracy, cost, complexity, assay stability, and time requirements between technology developers’ specifications and needs of the end-users. By going through a clinical needs assessment (CNA) process, developers will gain vital information and a clear focus that will help minimize the risks associated with the development of new technologies available for use within the health care system. This article summarizes best practices of the principal investigators of the National Institute of Biomedical Imaging and Bioengineering point-of-care (POC) centers within the National Institute of Biomedical Imaging and Bioengineering POC Technologies Research Network. Clinical needs assessments are particularly important for product development areas that do not sufficiently benefit from traditional market research, such as grant-funded research and development, new product lines using cutting-edge technologies developed in start-up companies, and products developed through product development partnerships for low-resource settings. The objectives of this article were to (1) highlight the importance of CNAs for development of POC devices, (2) discuss methods applied by POC Technologies Research Network for assessing clinical needs, and (3) provide a road map for future CNAs. PMID:23935405

Hydrogen, socio-environmental impact

NASA Technical Reports Server (NTRS)

Gilmore, J. S.; Matthews, W. E.; Duff, M. K.

1975-01-01

The concept and logic flow of a hydrogen technology assessment are described along with a specific procedure for such an assessment. The development of hydrogen technology is discussed. Factors considered in the development and use of hydrogen include: stimulus of societal needs and technological innovations; economic factors; and social and environmental effects.

Technology for School-Based Assessment and Assessment for Learning: Development Principles from New Zealand

ERIC Educational Resources Information Center

Hattie, John A. C.; Brown, Gavin T. L.

2008-01-01

National assessment systems can be enhanced with effective school-based assessment (SBA) that allows teachers to focus on improvement decisions. Modern computer-assisted technology systems are often used to deploy SBA systems. Since 2000, New Zealand has researched, developed, and deployed a national, computer-assisted SBA system. Eight major…

Assessment of US industry's technology trends and new technology requirements

NASA Technical Reports Server (NTRS)

1984-01-01

The utility and effectiveness of a novel approach (the Applications Development, or AD approach), intended to augment the efficiency of NASA's technology utilization (TU) through dissemination of NASA technologies and joint technology development efforts with U.S. industry is tested. The innovative AD approach consists of the following key elements: selection of NASA technologies appearing to have leading edge attributes; interaction with NASA researchers to assess the characteristics and quality of each selected technology; identification of industry's needs in the selected technology areas; structuring the selected technologies in terms of specifications and standards familiar to industry (industrial Spec. Sheets); identification and assessment of industry's interest in the specific selected NASA technologies, utilizing the greatly facilitated communication made possible by the availability of the industrial Spec. Sheets; and matching selected NASA technologies with the needs of selected industries.

Strategy for the Eighties: High Technology Industrial Development.

ERIC Educational Resources Information Center

Kansas State Dept. of Economic Development, Topeka.

The need for high technology development in Kansas is assessed, with attention to community considerations and the roles of universities and state government in fostering technology development and community considerations. After defining a high technology industry, technologically innovative industries are identified, and influences on the…

Using an Evaluability Assessment To Select Methods for Evaluating State Technology Development Programs: The Case of the Georgia Research Alliance.

ERIC Educational Resources Information Center

Youtie, Jan; Bozeman, Barry; Shapira, Philip

1999-01-01

Describes an evaluability assessment of the Georgia Research Alliance (GRA), a technology development program. Presents the steps involved in conducting an evaluability assessment, including development of an understanding of the program and its stakeholders. Analyzes and compares different methods by which the GRA could be evaluated. (SLD)

Integration of Mobile AR Technology in Performance Assessment

ERIC Educational Resources Information Center

Kuo-Hung, Chao; Kuo-En, Chang; Chung-Hsien, Lan; Kinshuk; Yao-Ting, Sung

2016-01-01

This study was aimed at exploring how to use augmented reality (AR) technology to enhance the effect of performance assessment (PA). A mobile AR performance assessment system (MARPAS) was developed by integrating AR technology to reduce the limitations in observation and assessment during PA. This system includes three modules: Authentication, AR…

Large Deployable Reflector (LDR) system concept and technology definition study. Volume 2: Technology assessment and technology development plan

NASA Technical Reports Server (NTRS)

Agnew, Donald L.; Jones, Peter A.

1989-01-01

A study was conducted to define reasonable and representative LDR system concepts for the purpose of defining a technology development program aimed at providing the requisite technological capability necessary to start LDR development by the end of 1991. This volume presents thirteen technology assessments and technology development plans, as well as an overview and summary of the LDR concepts. Twenty-two proposed augmentation projects are described (selected from more than 30 candidates). The five LDR technology areas most in need of supplementary support are: cryogenic cooling; astronaut assembly of the optically precise LDR in space; active segmented primary mirror; dynamic structural control; and primary mirror contamination control. Three broad, time-phased, five-year programs were synthesized from the 22 projects, scheduled, and funding requirements estimated.

Decision Gate Process for Assessment of a NASA Technology Development Portfolio

NASA Technical Reports Server (NTRS)

Kohli, Rajiv; Fishman, Julianna L.; Hyatt, Mark J.

2012-01-01

The NASA Dust Management Project (DMP) was established to provide technologies (to Technology Readiness Level (TRL) 6) required to address adverse effects of lunar dust to humans and to exploration systems and equipment, to reduce life cycle cost and risk, and to increase the probability of sustainable and successful lunar missions. The technology portfolio of DMP consisted of different categories of technologies whose final product was either a technology solution in itself, or one that contributes toward a dust mitigation strategy for a particular application. A Decision Gate Process (DGP) was developed to assess and validate the achievement and priority of the dust mitigation technologies as the technologies progress through the development cycle. The DGP was part of continuous technology assessment and was a critical element of DMP risk management. At the core of the process were technology-specific criteria developed to measure the success of each DMP technology in attaining the technology readiness levels assigned to each decision gate. The DGP accounts for both categories of technologies and qualifies the technology progression from technology development tasks to application areas. The process provided opportunities to validate performance, as well as to identify non-performance in time to adjust resources and direction. This paper describes the overall philosophy of the DGP and the methodology for implementation for DMP, and describes the method for defining the technology evaluation criteria. The process is illustrated by example of an application to a specific DMP technology.

Making Use of the New Student Assessment Standards To Enhance Technological Literacy.

ERIC Educational Resources Information Center

Russell, Jill

2003-01-01

Describes the student assessment standards outlined in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards," a companion to the "Standards for Technological Literacy." Discusses how the standards apply to everyday teaching practices. (JOW)

Toward a Method for Exposing and Elucidating Ethical Issues with Human Cognitive Enhancement Technologies.

PubMed

Hofmann, Bjørn

2017-04-01

To develop a method for exposing and elucidating ethical issues with human cognitive enhancement (HCE). The intended use of the method is to support and facilitate open and transparent deliberation and decision making with respect to this emerging technology with great potential formative implications for individuals and society. Literature search to identify relevant approaches. Conventional content analysis of the identified papers and methods in order to assess their suitability for assessing HCE according to four selection criteria. Method development. Amendment after pilot testing on smart-glasses. Based on three existing approaches in health technology assessment a method for exposing and elucidating ethical issues in the assessment of HCE technologies was developed. Based on a pilot test for smart-glasses, the method was amended. The method consists of six steps and a guiding list of 43 questions. A method for exposing and elucidating ethical issues in the assessment of HCE was developed. The method provides the ground work for context specific ethical assessment and analysis. Widespread use, amendments, and further developments of the method are encouraged.

Sandia National Laboratories: Employee & Retiree Resources: Emergency

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Laboratory Directed Research &

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Sandia National Laboratories: Missions:

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: About Sandia: Community Involvement:

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Sandia National Laboratories: Research: Research Foundations: Nanodevices

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Technology Assessment and Roadmap for the Emergency Radiation Dose Assessment Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turteltaub, K W; Hartman-Siantar, C; Easterly, C

2005-10-03

A Joint Interagency Working Group (JIWG) under the auspices of the Department of Homeland Security Office of Research and Development conducted a technology assessment of emergency radiological dose assessment capabilities as part of the overall need for rapid emergency medical response in the event of a radiological terrorist event in the United States. The goal of the evaluation is to identify gaps and recommend general research and development needs to better prepare the Country for mitigating the effects of such an event. Given the capabilities and roles for responding to a radiological event extend across many agencies, a consensus ofmore » gaps and suggested development plans was a major goal of this evaluation and road-mapping effort. The working group consisted of experts representing the Departments of Homeland Security, Health and Human Services (Centers for Disease Control and the National Institutes of Health), Food and Drug Administration, Department of Defense and the Department of Energy's National Laboratories (see appendix A for participants). The specific goals of this Technology Assessment and Roadmap were to: (1) Describe the general context for deployment of emergency radiation dose assessment tools following terrorist use of a radiological or nuclear device; (2) Assess current and emerging dose assessment technologies; and (3) Put forward a consensus high-level technology roadmap for interagency research and development in this area. This report provides a summary of the consensus of needs, gaps and recommendations for a research program in the area of radiation dosimetry for early response, followed by a summary of the technologies available and on the near-term horizon. We then present a roadmap for a research program to bring present and emerging near-term technologies to bear on the gaps in radiation dose assessment and triage. Finally we present detailed supporting discussion on the nature of the threats we considered, the status of technology today, promising emerging technologies and references for further reading.« less

Developing a TPCK-SRL Assessment Scheme for Conceptually Advancing Technology in Education

ERIC Educational Resources Information Center

Kohen, Zehavit; Kramarski, Bracha

2012-01-01

The present study aimed to: (a) develop a conceptual TPCK-SRL scheme for assessing teachers' integration of self-regulated learning (SRL) considerations while infusing technology into a TPCK classroom context (blending K = knowledge about T = technology, P = pedagogy, and C = content), which reflects all three knowledge components' dynamic…

Developing technological solutions for dietary assessment in children and young people

USDA-ARS?s Scientific Manuscript database

Several technology based systems for diet assessment among children have been developed. Reports on these systems were incorporated into this special journal issue. This is the first compendium of reports on diet assessment among children. The different systems vary from simple to complex, and from ...

Technology and testing.

PubMed

Quellmalz, Edys S; Pellegrino, James W

2009-01-02

Large-scale testing of educational outcomes benefits already from technological applications that address logistics such as development, administration, and scoring of tests, as well as reporting of results. Innovative applications of technology also provide rich, authentic tasks that challenge the sorts of integrated knowledge, critical thinking, and problem solving seldom well addressed in paper-based tests. Such tasks can be used on both large-scale and classroom-based assessments. Balanced assessment systems can be developed that integrate curriculum-embedded, benchmark, and summative assessments across classroom, district, state, national, and international levels. We discuss here the potential of technology to launch a new era of integrated, learning-centered assessment systems.

Technology Assessment Need: Review on Attractiveness and Competitiveness

NASA Astrophysics Data System (ADS)

Salwa Sait, Siti; Merlinda Muharam, Farrah; Chin, Thoo Ai; Sulaiman, Zuraidah

2017-06-01

Technology assessment is crucial in managing technology for the purpose of technology exploitation. With business environment continuously changing, firms have to address this issue critically as technology is considered one of the important elements to evaluate performance and gain competitive advantage. Missteps in deciding the best technology to be developed, employed or maintained would cost the firm overall value. To fulfil the need of finding the appropriate scale to assess suitable technology, this paper summarizes that technology assessment (TA) should cover two main aspects, namely technology attractiveness and competitiveness. These components are seen capable to link the scale suggested towards evaluation of financial and non-financial performance towards competitive advantage.

Sandia National Laboratories: National Security Missions: Defense Systems

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

"Learning to Assess" and "Assessing to Learn": The Construction of Knowledge about Assistive Technology

ERIC Educational Resources Information Center

Folkes, Clare; Carmichael, Patrick

2006-01-01

A key role in the development and deployment of Assistive Technology solutions is that of the "assessor-consultant". Assessor-consultants for the UK-based charity Abilitynet work with clients to develop customized computer-based assistive technology systems and draw on a range of shared knowledge from the assessor-consultant community.…

14 CFR 1216.305 - Criteria for actions requiring environmental assessments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... spacecraft development and flight projects in space and terrestrial applications. (3) Specific experimental projects in aeronautics and space technology and energy technology applications. (4) Development and... technology applications (e.g., Research and Technology Base, Systems Technology Programs) other than...

Sandia National Laboratories: Sandia inks pact with Fire and Rescue

Science.gov Websites

; Technology Defense Systems & Assessments About Defense Systems & Assessments Program Areas Robotics R&D 100 Awards Laboratory Directed Research & Development Technology Deployment Centers Audit Sandia's Economic Impact Licensing & Technology Transfer Browse Technology Portfolios

Performance assessment of small-package-class nonintrusive inspection systems

NASA Astrophysics Data System (ADS)

Spradling, Michael L.; Hyatt, Roger

1997-02-01

The DoD Counterdrug Technology Development Program has addressed the development and demonstration of technology to enhance nonintrusive inspection of small packages such as passenger baggage, commercially delivered parcels, and breakbulk cargo items. Within the past year they have supported several small package-class nonintrusive inspection system performance assessment activities. All performance assessment programs involved the use of a red/blue team concept and were conducted in accordance with approved assessment protocols. This paper presents a discussion related to the systematic performance assessment of small package-class nonintrusive inspection technologies, including transmission, backscatter and computed tomography x-ray imaging, and protocol-related considerations for the assessment of these systems.

Advanced Radioisotope Power Conversion Technology Research and Development

NASA Technical Reports Server (NTRS)

Wong, Wayne A.

2004-01-01

NASA's Radioisotope Power Conversion Technology program is developing next generation power conversion technologies that will enable future missions that have requirements that cannot be met by either the ubiquitous photovoltaic systems or by current Radioisotope Power System (RPS) technology. Performance goals of advanced radioisotope power systems include improvement over the state-of-practice General Purpose Heat Source/Radioisotope Thermoelectric Generator by providing significantly higher efficiency to reduce the number of radioisotope fuel modules, and increase specific power (watts/kilogram). Other Advanced RPS goals include safety, long-life, reliability, scalability, multi-mission capability, resistance to radiation, and minimal interference with the scientific payload. NASA has awarded ten contracts in the technology areas of Brayton, Stirling, Thermoelectric, and Thermophotovoltaic power conversion including five development contracts that deal with more mature technologies and five research contracts. The Advanced RPS Systems Assessment Team includes members from NASA GRC, JPL, DOE and Orbital Sciences whose function is to review the technologies being developed under the ten Radioisotope Power Conversion Technology contracts and assess their relevance to NASA's future missions. Presented is an overview of the ten radioisotope power conversion technology contracts and NASA's Advanced RPS Systems Assessment Team.

Technology Alignment and Portfolio Prioritization (TAPP): Advanced Methods in Strategic Analysis, Technology Forecasting and Long Term Planning for Human Exploration and Operations, Advanced Exploration Systems and Advanced Concepts

NASA Technical Reports Server (NTRS)

Funaro, Gregory V.; Alexander, Reginald A.

2015-01-01

The Advanced Concepts Office (ACO) at NASA, Marshall Space Flight Center is expanding its current technology assessment methodologies. ACO is developing a framework called TAPP that uses a variety of methods, such as association mining and rule learning from data mining, structure development using a Technological Innovation System (TIS), and social network modeling to measure structural relationships. The role of ACO is to 1) produce a broad spectrum of ideas and alternatives for a variety of NASA's missions, 2) determine mission architecture feasibility and appropriateness to NASA's strategic plans, and 3) define a project in enough detail to establish an initial baseline capable of meeting mission objectives ACO's role supports the decision­-making process associated with the maturation of concepts for traveling through, living in, and understanding space. ACO performs concept studies and technology assessments to determine the degree of alignment between mission objectives and new technologies. The first step in technology assessment is to identify the current technology maturity in terms of a technology readiness level (TRL). The second step is to determine the difficulty associated with advancing a technology from one state to the next state. NASA has used TRLs since 1970 and ACO formalized them in 1995. The DoD, ESA, Oil & Gas, and DoE have adopted TRLs as a means to assess technology maturity. However, "with the emergence of more complex systems and system of systems, it has been increasingly recognized that TRL assessments have limitations, especially when considering [the] integration of complex systems." When performing the second step in a technology assessment, NASA requires that an Advancement Degree of Difficulty (AD2) method be utilized. NASA has used and developed or used a variety of methods to perform this step: Expert Opinion or Delphi Approach, Value Engineering or Value Stream, Analytical Hierarchy Process (AHP), Technique for the Order of Prioritization by Similarity to Ideal Solution (TOPSIS), and other multi­-criteria decision-making methods. These methods can be labor-intensive, often contain cognitive or parochial bias, and do not consider the competing prioritization between mission architectures. Strategic Decision-Making (SDM) processes cannot be properly understood unless the context of the technology is understood. This makes assessing technological change particularly challenging due to the relationships "between incumbent technology and the incumbent (innovation) system in relation to the emerging technology and the emerging innovation system." The central idea in technology dynamics is to consider all activities that contribute to the development, diffusion, and use of innovations as system functions. Bergek defines system functions within a TIS to address what is actually happening and has a direct influence on the ultimate performance of the system and technology development. ACO uses similar metrics and is expanding these metrics to account for the structure and context of the technology. At NASA technology and strategy is strongly interrelated. NASA's Strategic Space Technology Investment Plan (SSTIP) prioritizes those technologies essential to the pursuit of NASA's missions and national interests. The SSTIP is strongly coupled with NASA's Technology Roadmaps to provide investment guidance during the next four years, within a twenty-year horizon. This paper discusses the methods ACO is currently developing to better perform technology assessments while taking into consideration Strategic Alignment, Technology Forecasting, and Long Term Planning.

Technology assessment of solar energy utilization

NASA Astrophysics Data System (ADS)

Jaeger, F.

1985-11-01

The general objectives and methods of Technology Assessment (TA) are outlined. Typical analysis steps of a TA for solar energy are reviewed: description of the technology and its further development; identification of impact areas; analysis of boundary conditions and definition of scenarios; market penetration of solar technologies; projection of consequences in areas of impact; and assessment of impacts and identification of options for action.

Online Assessment in Mathematics and Writing: Reports from the NAEP Technology-Based Assessment Project, Research and Development Series. NCES 2005-457

ERIC Educational Resources Information Center

Sandene, Brent; Horkay, Nancy; Bennett, Randy Elliot; Allen, Nancy; Braswell, James; Kaplan, Bruce; Oranje, Andreas

2005-01-01

This publication presents the reports from two studies, Math Online (MOL) and Writing Online (WOL), part of the National Assessment of Educational Progress (NAEP) Technology-Based Assessment (TBA) project. Funded by the National Center for Education Statistics (NCES), the Technology-Based Assessment project is intended to explore the use of new…

R&D in the maritime industry : a supplement to an assessment of maritime trade and technology

DOT National Transportation Integrated Search

1985-05-01

Since the publication of "An Assessment of Maritime Trade and Technology" by Office of Technology Assessment (OTA) in October 1983, various proposals have been made to provide incentives for research and development (R&D) in an effort to enhance the ...

[Development of Terahertz Imaging Technology in the Assessment of Burn Injuries].

PubMed

Zhu, Xinjian; He, Xuan; Wang, Pin; Gao, Dandan; Qiu, Yan; He, Qinghua; Wu, Baoming

2016-02-01

Terahertz waves have unique properties and advantages, which makes it gain increasing attention and applications in the biomedical field. Burns is a common clinical trauma. Since the water-sensitive and non-destructive characteristics of terahertz, terahertz imaging techniques can be used to detect burns. So far, terahertz imaging technology in the assessment of burn injuries has been developed from ex vivo to in vivo, and high-resolution images can be obtained through the gauzes and plasters. In this paper, we mainly introduces the application of terahertz imaging technology and development in the assessment of burn injuries.

An assessment of technology alternatives for telecommunications and information management for the space exploration initiative

NASA Technical Reports Server (NTRS)

Ponchak, Denise S.; Zuzek, John E.

1991-01-01

On the 20th anniversary of the Apollo 11 lunar landing, President Bush set forth ambitious goals for expanding human presence in the solar system. The Space Exploration Initiative (SEI) addresses these goals beginning with Space Station Freedom, followed by a permanent return to the Moon, and a manned mission to Mars. A well designed, adaptive Telecommunications, Navigation, and Information Management (TNIM) infrastructure is vital to the success of these missions. Utilizing initial projections of user requirements, a team under the direction of NASA's Office of Space Operations developed overall architectures and point designs to implement the TNIM functions for the Lunar and Mars mission scenarios. Based on these designs, an assessment of technology alternatives for the telecommunications and information management functions was performed. This technology assessment identifies technology developments necessary to meet the telecommunications and information management system requirements for SEI. Technology requirements, technology needs and alternatives, the present level of technology readiness in each area, and a schedule for development are presented.

Railroad Classification Yard Technology : A Survey and Assessment

DOT National Transportation Integrated Search

1977-01-01

This report documents a survey and assessment of the current state of the art in rail freight-car classification yard technology. The major objective was the identification of research and development necessary for technological improvements in railr...

Technical Submission Form: Technical Specification of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Nielsen, Kim; Kennedy, Ben

The Wave - SPARC project developed the Technology Performance Level (TPL) assessment procedure based on a rigorous Systems Engineering exercise. The TPL assessment allows a whole system evaluation of Wave Energy Conversion Technology by measuring it against the requirements determined through the Systems Engineering exercise. The TPL assessment is intended to be useful in technology evaluation; in technology innovation; in allocation of public or priva te investment, and; in making equipment purchasing decisions. This Technical Submission Form (TSF) serves the purpose of collecting relevant and complete information, in a technology agnostic way, to allow TPL assessment s to be mademore » by third party assessor s. The intended usage of this document is that the organization or people that are performing the role of developers or promoters of a particular technology will use this form to provide the information necessary for the organization or people who are perf orming the assessor role to use the TPL assessment.« less

Practice parameters facilitating adoption of advanced technologies for enhancing neuropsychological assessment paradigms.

PubMed

Parsons, Thomas D; McMahan, Timothy; Kane, Robert

2018-01-01

Clinical neuropsychologists have long underutilized computer technologies for neuropsychological assessment. Given the rapid advances in technology (e.g. virtual reality; tablets; iPhones) and the increased accessibility in the past decade, there is an on-going need to identify optimal specifications for advanced technologies while minimizing potential sources of error. Herein, we discuss concerns raised by a joint American Academy of Clinical Neuropsychology/National Academy of Neuropsychology position paper. Moreover, we proffer parameters for the development and use of advanced technologies in neuropsychological assessments. We aim to first describe software and hardware configurations that can impact a computerized neuropsychological assessment. This is followed by a description of best practices for developers and practicing neuropsychologists to minimize error in neuropsychological assessments using advanced technologies. We also discuss the relevance of weighing potential computer error in light of possible errors associated with traditional testing. Throughout there is an emphasis on the need for developers to provide bench test results for their software's performance on various devices and minimum specifications (documented in manuals) for the hardware (e.g. computer, monitor, input devices) in the neuropsychologist's practice. Advances in computerized assessment platforms offer both opportunities and challenges. The challenges can appear daunting but are a manageable and require informed consumers who can appreciate the issues and ask pertinent questions in evaluating their options.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Materials technology assessment for stirling engines

NASA Technical Reports Server (NTRS)

Stephens, J. R.; Witzke, W. R.; Watson, G. K.; Johnston, J. R.; Croft, W. J.

1977-01-01

A materials technology assessment of high temperature components in the improved (metal) and advanced (ceramic) Stirling engines was undertaken to evaluate the current state-of-the-art of metals and ceramics, identify materials research and development required to support the development of automotive Stirling engines, and to recommend materials technology programs to assure material readiness concurrent with engine system development programs. The most critical component for each engine is identified and some of the material problem areas are discussed.

ACOG Technology Assessment in Obstetrics and Gynecology No. 6: Robot-assisted surgery.

PubMed

2009-11-01

The field of robotic surgery is developing rapidly, but experience with this technology is currently limited. In response to increasing interest in robotics technology, the Committee on Gynecologic Practice's Technology Assessment was developed to describe the robotic surgical system,potential advantages and disadvantages, gynecologic applications, and the current state of the evidence. Randomized trials comparing robot-assisted surgery with traditional laparoscopic, vaginal, or abdominal surgery are needed to evaluate long-term clinical outcomes and cost-effectiveness, as well as to identify the best applications of this technology.

Production technology readiness assessment of surfactant in the research center for Chemistry-Indonesian Institute of Sciences

NASA Astrophysics Data System (ADS)

Setiawan, Arief Ameir Rahman; Sulaswatty, Anny

2017-11-01

The common problem faced by the institution working on research, innovation and technology development is lack of quantitative measures to determine the technology readiness of research. No common communication language between R & D Institutions and industry about the level of preparedness of a research resulting a barrier to technology diffusion interaction. This lack of connection between R & D institutes with industry may lead to "sluggishness" occurs in innovating. For such circumstance, assessing technology readiness of research is very important. One of wide spread methods for the assessment is Technology Readiness Level (TRL, also known as Technometer), which is introduced by NASA (National Aeronautics and Space Administration). TRL is a general guide that provides an overview of maturity level of a technology. This study aims to identify and demonstrate the implementation of TRL to assess a number of surfactant researches in the Research Center for Chemistry, Indonesian Institute of Sciences. According to the assessment, it has been obtained the surfactant recommended for further development towards commercialization of R & D results, i.e. Glycerol Mono Stearate (GMS), which has reached the level of TRL 7.

Developing an Instrument for Assessing Students' Concepts of the Nature of Technology

ERIC Educational Resources Information Center

Liou, Pey-Yan

2015-01-01

Background: The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students'…

Measuring Cognition of Students with Disabilities Using Technology-Enabled Assessments: Recommendations for a National Research Agenda

ERIC Educational Resources Information Center

Bechard, Sue; Sheinker, Jan; Abell, Rosemary; Barton, Karen; Burling, Kelly; Camacho, Christopher; Cameto, Renee; Haertel, Geneva; Hansen, Eric; Johnstone, Chris; Kingston, Neal; Murray, Elizabeth; Parker, Caroline E.; Redfield, Doris; Tucker, Bill

2010-01-01

This article represents one outcome from the "Invitational Research Symposium on Technology-Enabled and Universally Designed Assessments," which examined technology-enabled assessments (TEA) and universal design (UD) as they relate to students with disabilities (SWD). It was developed to stimulate research into TEAs designed to better understand…

Assessing Scientific and Technological Enquiry Skills at Age 11 Using the E-Scape System

ERIC Educational Resources Information Center

Davies, Dan; Collier, Chris; Howe, Alan

2012-01-01

This article reports on the outcomes from the "e-scape Primary Scientific and Technological Understanding Assessment Project" (2009-2010), which aimed to support primary teachers in developing valid portfolio-based tasks to assess pupils' scientific and technological enquiry skills at age 11. This was part of the wider…

How Might the Use of Technology in Formative Assessment Support Changes in Mathematics Teaching?

ERIC Educational Resources Information Center

Olsher, Shai; Yerushalmy, Michal; Chazan, Daniel

2016-01-01

Technological developments make it feasible to assess students' mathematics work automatically when students are working in rich digital environments and thus offer important affordances for assessment in the service of instruction. In this article, we illustrate how these technological advances might be harnessed to support the work of teachers…

A Self-Assessment Framework for Inclusive Schools Supporting Assistive Technology Users.

PubMed

Hoogerwerf, Evert-Jan; Solander-Gross, Andrea; Mavrou, Katerina; Traina, Ivan; Hersh, Marion

2017-01-01

In order to support schools to assess their performance in supporting children with disabilities in their ICT and ICT-AT needs, a self-assessment framework was developed by a task force of partners and associate partners of the ENTELIS project. The self-assessment tool aims to help educational establishments that welcome learners with disabilities to assess their current outcomes and to plan improvements in supporting these students in increasing digital literacy and developing digital skills. This includes the use of mainstream Information and Communication Technology (ICT) and specially designed digital Assistive Technologies (ICT-AT). This can only successfully happen if schools fully embrace an inclusive approach to education. In this paper the authors describe the development of the framework and the further steps for its use.

The social function of technology assessment

NASA Technical Reports Server (NTRS)

Huddle, F. P.

1972-01-01

The problem of preserving the uneasy balance between a dynamic society and the equilibrium of man-environment society is discussed. Four sets of activities involved in technology assessment are considered: (1) Technology forecasting is necessary to warn of future dangers and opportunities, for effective timing, and to identify tradeoffs and alternatives. But forecasting is also chancy at best. (2) Social indicators need to be developed for the characterization of social status and measurement of social progress, as well as a better understanding of social needs. (3) With respect to technology assessment, the conflict between profitable directions of innovations and socially desirable directions is described, and a systematic way is needed to determine in advance what is technologically feasible to meet social needs. (4) National goals with respect to scientific and technological developments are also required.

Patient assessment systems using the World Wide Web.

PubMed

Kohane, I S

1997-02-01

Of the major issues in developing a Web patient assessment system, I have emphasized two main points. First, the World Wide Web can provide substantial leverage in the development of online patient assessment systems. Second, although the existence of Internet technologies does not alter the need to resolve issues that preceded their arrival, current trends suggest that in the home and the office, patient assessment systems will increasingly employ Internet technologies.

NIST biometric evaluations and developments

NASA Astrophysics Data System (ADS)

Garris, Michael D.; Wilson, Charles L.

2005-05-01

This paper presents an R&D framework used by the National Institute of Standards and Technology (NIST) for biometric technology testing and evaluation. The focus of this paper is on fingerprint-based verification and identification. Since 9-11 the NIST Image Group has been mandated by Congress to run a program for biometric technology assessment and biometric systems certification. Four essential areas of activity are discussed: 1) developing test datasets, 2) conducting performance assessment; 3) technology development; and 4) standards participation. A description of activities and accomplishments are provided for each of these areas. In the process, methods of performance testing are described and results from specific biometric technology evaluations are presented. This framework is anticipated to have broad applicability to other technology and application domains.

Technologies for Language Assessment.

ERIC Educational Resources Information Center

Burstein, Jill; And Others

1996-01-01

Reviews current and developing technology uses that are relevant to language assessment and discusses examples of recent linguistic applications from the laboratory at the Educational Testing Service. The processes of language test development are described and the functions they serve from the perspective of a large testing organization are…

COMPREHENSIVE ASSESSMENT OF COMPLEX TECHNOLOGIES: INTEGRATING VARIOUS ASPECTS IN HEALTH TECHNOLOGY ASSESSMENT.

PubMed

Lysdahl, Kristin Bakke; Mozygemba, Kati; Burns, Jacob; Brönneke, Jan Benedikt; Chilcott, James B; Ward, Sue; Hofmann, Bjørn

2017-01-01

Despite recent development of health technology assessment (HTA) methods, there are still methodological gaps for the assessment of complex health technologies. The INTEGRATE-HTA guidance for effectiveness, economic, ethical, socio-cultural, and legal aspects, deals with challenges when assessing complex technologies, such as heterogeneous study designs, multiple stakeholder perspectives, and unpredictable outcomes. The objective of this article is to outline this guidance and describe the added value of integrating these assessment aspects. Different methods were used to develop the various parts of the guidance, but all draw on existing, published knowledge and were supported by stakeholder involvement. The guidance was modified after application in a case study and in response to feedback from internal and external reviewers. The guidance consists of five parts, addressing five core aspects of HTA, all presenting stepwise approaches based on the assessment of complexity, context, and stakeholder involvement. The guidance on effectiveness, health economics and ethics aspects focus on helping users choose appropriate, or further develop, existing methods. The recommendations are based on existing methods' applicability for dealing with problems arising with complex interventions. The guidance offers new frameworks to identify socio-cultural and legal issues, along with overviews of relevant methods and sources. The INTEGRATE-HTA guidance outlines a wide range of methods and facilitates appropriate choices among them. The guidance enables understanding of how complexity matters for HTA and brings together assessments from disciplines, such as epidemiology, economics, ethics, law, and social theory. This indicates relevance for a broad range of technologies.

Technology for Online Portfolio Assessment Programs

ERIC Educational Resources Information Center

Ferrara, Victoria M.

2010-01-01

Portfolio assessment is a valid and reliable method to assess experiential learning. Developing a fully online portfolio assessment program is neither easy nor inexpensive. The institution seeking to take its portfolio assessment program online must make a commitment to its students by offering the technologies most suited to meet students' needs.…

Payload software technology: Software technology development plan

NASA Technical Reports Server (NTRS)

1977-01-01

Programmatic requirements for the advancement of software technology are identified for meeting the space flight requirements in the 1980 to 1990 time period. The development items are described, and software technology item derivation worksheets are presented along with the cost/time/priority assessments.

The integration of technology into the middle and high school science curriculum

NASA Astrophysics Data System (ADS)

Corbin, Jan Frederic

This study was to determine the level of technology implementation into the middle and high school science curriculum by beginning teachers. Research was conducted in two phases. The first phase was a survey that provided demographic data and determined the Level of Technology Implementation, Personal Computer Use, and Current Instructional Practice. Dr. Christopher Moersch developed the survey, Level of Technology Implementation (LoTi(c) ). The data provided insight into what technology teachers use, barriers associated with technology integration, teacher training and development, and technical support. Follow-up interviews were conducted to gather additional qualitative data and information. Analysis of the data found beginning teachers have not received enough technology training to integrate technology seamlessly into the science curriculum. Conclusions cite the need for more technology courses during preservice education, more time during the day for beginning teachers to learn to use the technology available at their schools, consolidation of inservice staff development offerings, and more technical support staff readily available. Recommendations were made to expand the study group to all science teachers, assess the technology capacity of all schools, and conduct needs assessment of inservice staff development.

Developing a Technological Pedagogical Content Knowledge (TPACK) Assessment for Preservice Teachers Learning to Teach English as a Foreign Language

ERIC Educational Resources Information Center

Baser, Derya; Kopcha, Theodore J.; Ozden, M. Yasar

2016-01-01

This paper reports the development and validation process of a self-assessment survey that examines technological pedagogical content knowledge (TPACK) among preservice teachers learning to teach English as a foreign language (EFL). The survey, called TPACK-EFL, aims to provide an assessment tool for preservice foreign language teachers that…

Innovative Medical Technology, Health Technology Assessment, and Health Policy: The Case of Remote Patient Monitoring of Cardiac Implantable Electronic Devices in South Korea.

PubMed

Lee, Sang-Soo; Salole, Eugene

2017-01-01

In many developed countries with universal coverage healthcare systems, payers require new medical technologies to be assessed as safe, effective, and cost-effective through health technology assessment (HTA) before approval for reimbursement coverage and market access. However, in some cases, HTA is not the sole criterion for decision-making and other factors override the evidence. Remote patient monitoring (RPM) for cardiac implantable electronic devices, a novel technology recognized as safe, effective, and cost-effective, and the standard of care in many countries, is prohibited in South Korea. This peculiar situation is apparently due to deficiencies in healthcare policy and the delivery system and also to poor engagement between stakeholders. We propose that a higher level of engagement and trust between stakeholders needs to be developed, and healthcare providers should be involved in the early development of health policy, so that unnecessary barriers to access to useful medical technology are corrected, thereby allowing Koreans to enjoy the benefits available in other developed countries.

Assessment, evaluation, and testing of technologies for environmental restoration, decontamination, and decommissioning and high level waste management. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uzochukwu, G.A.

1997-12-31

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration, decontamination and decommissioning, and high-level waste management objectives are being assessed and evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objectives of the environmental restoration, decontamination and decommissioning, and high-level waste management effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formattedmore » and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.« less

Technology and Current Reading/Literacy Assessment Strategies

ERIC Educational Resources Information Center

Balajthy, Ernest

2007-01-01

Computer-based technologies offer promise as a means to assess students and provide teachers with better understandings of their students' achievement. This article describes recent developments in computer-based and web-based reading and literacy assessment, focusing on assessment administration, information management, and report creation. In…

Technology-Enabled and Universally Designed Assessment: Considering Access in Measuring the Achievement of Students with Disabilities--A Foundation for Research

ERIC Educational Resources Information Center

Almond, Patricia; Winter, Phoebe; Cameto, Renee; Russell, Michael; Sato, Edynn; Clarke-Midura, Jody; Torres, Chloe; Haertel, Geneva; Dolan, Robert; Beddow, Peter; Lazarus, Sheryl

2010-01-01

This paper represents one outcome from the "Invitational Research Symposium on Technology-Enabled and Universally Designed Assessments," which examined technology-enabled assessments (TEA) and universal design (UD) as they relate to students with disabilities (SWD). It was developed to stimulate research into TEAs designed to make tests…

2014 Abridged Technology and Engineering Literacy Framework for the 2014 National Assessment of Educational Progress

ERIC Educational Resources Information Center

National Assessment Governing Board, 2014

2014-01-01

Due to the growing importance of technology and engineering in the educational landscape, and to support America's ability to contribute to and compete in a global economy, the National Assessment Governing Board (NAGB) initiated development of the first NAEP Technology and Engineering Literacy (TEL) Assessment. Relating to national efforts in…

Water assessment for the Lower Colorado River region-emerging energy technology development

NASA Astrophysics Data System (ADS)

1981-08-01

Water supply availability for two hypothetical levels of emerging energy technology development are assessed. The water and related land resources implications of such hypothetical developments are evaluated. Water requirement, the effects on water quality, costs of water supplies, costs of disposal of wastewaters, and the environmental, economic and social impacts are determined, providing information for the development of non-nuclear energy research.

Challenges in the development and reimbursement of personalized medicine-payer and manufacturer perspectives and implications for health economics and outcomes research: a report of the ISPOR personalized medicine special interest group.

PubMed

Faulkner, Eric; Annemans, Lieven; Garrison, Lou; Helfand, Mark; Holtorf, Anke-Peggy; Hornberger, John; Hughes, Dyfrig; Li, Tracy; Malone, Daniel; Payne, Katherine; Siebert, Uwe; Towse, Adrian; Veenstra, David; Watkins, John

2012-12-01

Personalized medicine technologies can improve individual health by delivering the right dose of the right drug to the right patient at the right time but create challenges in deciding which technologies offer sufficient value to justify widespread diffusion. Personalized medicine technologies, however, do not neatly fit into existing health technology assessment and reimbursement processes. In this article, the Personalized Medicine Special Interest Group of the International Society for Pharmacoeconomics and Outcomes Research evaluated key development and reimbursement considerations from the payer and manufacturer perspectives. Five key areas in which health economics and outcomes research best practices could be developed to improve value assessment, reimbursement, and patient access decisions for personalized medicine have been identified. These areas are as follows: 1 research prioritization and early value assessment, 2 best practices for clinical evidence development, 3 best practices for health economic assessment, 4 addressing health technology assessment challenges, and 5 new incentive and reimbursement approaches for personalized medicine. Key gaps in health economics and outcomes research best practices, decision standards, and value assessment processes are also discussed, along with next steps for evolving health economics and outcomes research practices in personalized medicine. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Illustrating anticipatory life cycle assessment for emerging photovoltaic technologies.

PubMed

Wender, Ben A; Foley, Rider W; Prado-Lopez, Valentina; Ravikumar, Dwarakanath; Eisenberg, Daniel A; Hottle, Troy A; Sadowski, Jathan; Flanagan, William P; Fisher, Angela; Laurin, Lise; Bates, Matthew E; Linkov, Igor; Seager, Thomas P; Fraser, Matthew P; Guston, David H

2014-09-16

Current research policy and strategy documents recommend applying life cycle assessment (LCA) early in research and development (R&D) to guide emerging technologies toward decreased environmental burden. However, existing LCA practices are ill-suited to support these recommendations. Barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. Overcoming these challenges requires methodological advances that help identify environmental opportunities prior to large R&D investments. Such an anticipatory approach to LCA requires synthesis of social, environmental, and technical knowledge beyond the capabilities of current practices. This paper introduces a novel framework for anticipatory LCA that incorporates technology forecasting, risk research, social engagement, and comparative impact assessment, then applies this framework to photovoltaic (PV) technologies. These examples illustrate the potential for anticipatory LCA to prioritize research questions and help guide environmentally responsible innovation of emerging technologies.

College Students' Attitude towards Computer Technology

ERIC Educational Resources Information Center

Njagi, K. O.; Havice, W. L.

2011-01-01

Recent advances in the contemporary world, especially in the area of computer technology, have heralded the development and implementation of new and innovative teaching strategies and particularly with the Internet revolution. This study assessed students' attitude towards computer technology. Specifically, the study assessed differences in…

AN INTEGRATED PERSPECTIVE ON THE ASSESSMENT OF TECHNOLOGIES: INTEGRATE-HTA.

PubMed

Wahlster, Philip; Brereton, Louise; Burns, Jacob; Hofmann, Björn; Mozygemba, Kati; Oortwijn, Wija; Pfadenhauer, Lisa; Polus, Stephanie; Rehfuess, Eva; Schilling, Imke; van der Wilt, Gert Jan; Gerhardus, Ansgar

2017-01-01

Current health technology assessment (HTA) is not well equipped to assess complex technologies as insufficient attention is being paid to the diversity in patient characteristics and preferences, context, and implementation. Strategies to integrate these and several other aspects, such as ethical considerations, in a comprehensive assessment are missing. The aim of the European research project INTEGRATE-HTA was to develop a model for an integrated HTA of complex technologies. A multi-method, four-stage approach guided the development of the INTEGRATE-HTA Model: (i) definition of the different dimensions of information to be integrated, (ii) literature review of existing methods for integration, (iii) adjustment of concepts and methods for assessing distinct aspects of complex technologies in the frame of an integrated process, and (iv) application of the model in a case study and subsequent revisions. The INTEGRATE-HTA Model consists of five steps, each involving stakeholders: (i) definition of the technology and the objective of the HTA; (ii) development of a logic model to provide a structured overview of the technology and the system in which it is embedded; (iii) evidence assessment on effectiveness, economic, ethical, legal, and socio-cultural aspects, taking variability of participants, context, implementation issues, and their interactions into account; (iv) populating the logic model with the data generated in step 3; (v) structured process of decision-making. The INTEGRATE-HTA Model provides a structured process for integrated HTAs of complex technologies. Stakeholder involvement in all steps is essential as a means of ensuring relevance and meaningful interpretation of the evidence.

Technology assessment and the Congress

NASA Technical Reports Server (NTRS)

Carpenter, R. A.

1972-01-01

The legislative branch is considered as the major focus for technology assessment, and the functions of the Congressional Research Service in supplying Congressmen with scientific and technological development is outlined, and the need for Congress to control, assess, and integrate the various and conflicting elements for the benefit of both technology and society is stressed. The organization of the Science Policy Research Division is mentioned, and its duties in gathering facts for the increased understanding by the members of Congress are indicated. Technology assessment aspects associated with congressional committees and hearings, adequacy of advice, trends in engineering education, and the public interest are also discussed.

Technology readiness assessments: A retrospective

NASA Astrophysics Data System (ADS)

Mankins, John C.

2009-11-01

The development of new system capabilities typically depends upon the prior success of advanced technology research and development efforts. These systems developments inevitably face the three major challenges of any project: performance, schedule and budget. Done well, advanced technology programs can substantially reduce the uncertainty in all three of these dimensions of project management. Done poorly, or not at all, and new system developments suffer from cost overruns, schedule delays and the steady erosion of initial performance objectives. It is often critical for senior management to be able to determine which of these two paths is more likely—and to respond accordingly. The challenge for system and technology managers is to be able to make clear, well-documented assessments of technology readiness and risks, and to do so at key points in the life cycle of the program. In the mid 1970s, the National Aeronautics and Space Administration (NASA) introduced the concept of "technology readiness levels" (TRLs) as a discipline-independent, programmatic figure of merit (FOM) to allow more effective assessment of, and communication regarding the maturity of new technologies. In 1995, the TRL scale was further strengthened by the articulation of the first definitions of each level, along with examples (J. Mankins, Technology readiness levels, A White Paper, NASA, Washington, DC, 1995. [1]). Since then, TRLs have been embraced by the U.S. Congress' General Accountability Office (GAO), adopted by the U.S. Department of Defense (DOD), and are being considered for use by numerous other organizations. Overall, the TRLs have proved to be highly effective in communicating the status of new technologies among sometimes diverse organizations. This paper will review the concept of "technology readiness assessments", and provide a retrospective on the history of "TRLs" during the past 30 years. The paper will conclude with observations concerning prospective future directions for the important discipline of technology readiness assessments.

Assessment of Vehicle Sizing, Energy Consumption and Cost Through Large Scale Simulation of Advanced Vehicle Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moawad, Ayman; Kim, Namdoo; Shidore, Neeraj

2016-01-01

The U.S. Department of Energy (DOE) Vehicle Technologies Office (VTO) has been developing more energy-efficient and environmentally friendly highway transportation technologies that will enable America to use less petroleum. The long-term aim is to develop "leapfrog" technologies that will provide Americans with greater freedom of mobility and energy security, while lowering costs and reducing impacts on the environment. This report reviews the results of the DOE VTO. It gives an assessment of the fuel and light-duty vehicle technologies that are most likely to be established, developed, and eventually commercialized during the next 30 years (up to 2045). Because of themore » rapid evolution of component technologies, this study is performed every two years to continuously update the results based on the latest state-of-the-art technologies.« less

A model for technology assessment applied to pulse oximetry. The Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

1993-04-01

To test a model for the assessment of critical care technology. To develop practice guidelines for the use of pulse oximetry. A computer-assisted search of the English language literature and interviews with recognized experts in the field of pulse oximetry. Those studies that addressed one or more of the seven questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining the method of practice policy development we utilized. A focus person summarized the data from the selected studies that related to each of the seven assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force and then sent to 16 expert reviewers for comment. These expert comments were considered by the task force, and this final consensus report was developed. Pulse oximetry combines the principles of spectrophotometry and plethysmography to noninvasively measure oxygen saturation with a high degree of accuracy over the range of 80% to 100% saturation, assuming the device is being used according to the manufacturer's instructions and without any adverse operating conditions. The appropriate clinical uses of pulse oximetry fall into one of two broad categories: as a warning system based on continuous real-time measurement of arterial desaturation, or as an end-point for titration of therapeutic interventions. There are no published studies that allow for definitive, outcome-based conclusions concerning either the clinical impact or cost-benefit ratio of pulse oximetry. The model developed for technology assessment proved to be appropriate for assessing pulse oximetry. The available data have allowed us to develop an evidence-based practice policy for the use of pulse oximetry in critical care. Critical care clinicians, researchers, and industry have a shared responsibility to provide valid outcome and efficacy studies of new technologies.

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Steckleim, Jonette M.; Alexander, Leslie; Rahman, Shamin A.; Rosenthal, Matthew; Wiley, Dianne S.; Davison, Stephan C.; Korsmeyer, David J.;

Critical Technology Determination for Future Human Space Flight

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Vangen, Scott D.; Williams-Byrd, Julie A.; Stecklein, Jonette M.; Rahman, Shamim A.; Rosenthal, Matthew E.; Hornyak, David M.; Alexander, Leslie; Korsmeyer, David J.; Tu, Eugene L.;

Achieving a Prioritized Research and Technology Development Portfolio for the Dust Management Project

NASA Technical Reports Server (NTRS)

Hyatt, Mark J.; Abel, Phillip; Delaune, Paul; Fishman, Julianna; Kohli, Rajiv

2009-01-01

Mission architectures for human exploration of the lunar surface continue to advance as well as the definitions of capability needs, best practices and engineering design to mitigate the impact of lunar dust on exposed systems. The NASA DMP has been established as the agency focal point for dust characterization, technology, and simulant development. As described in this paper, the DMP has defined a process for selecting and justifying its R&T portfolio. The technology prioritization process, which is based on a ranking system according to weighted criteria, has been successfully applied to the current DMP dust mitigation technology portfolio. Several key findings emerged from this assessment. Within the dust removal and cleaning technologies group, there are critical technical challenges that must be overcome for these technologies to be implemented for lunar applications. For example, an in-situ source of CO2 on the moon is essential to the CO2 shower technology. Also, significant development effort is required to achieve technology readiness level TRL 6 for the electrostatic cleaning system for removal of particles smaller than 50 pm. The baseline materials related technologies require considerable development just to achieve TRL 6. It is also a nontrivial effort to integrate the materials in hardware for lunar application. At present, there are no terrestrial applications that are readily adaptable to lunar surface applications nor are there any obvious leading candidates. The unique requirements of dust sealing systems for lunar applications suggest an extensive development effort will be necessary to mature dust sealing systems to TRL 6 and beyond. As discussed here, several alternate materials and technologies have achieved high levels of maturity for terrestrial applications and warrant due diligence in ongoing assessment of the technology portfolio. The present assessment is the initial step in an ongoing effort to continually evaluate the DMP technology portfolio and external non-NASA relevant technology developments efforts to maintain an optimal investment profile. At the same time, there is an ongoing review of agency-wide dust-related R&T activities. The results of these ongoing assessments will be reported in future publications.

Technological Applications in Science Assessment.

ERIC Educational Resources Information Center

Helgeson, Stanley L.; Kumar, David D.

Educational technology has been a focus of development and research in science teaching and learning. This document reviews research dealing with computer and hypermedia applications to assessment in science education. The paper reports the findings first for computer applications for assessment and then for hypermedia applications in assessment.…

Information Technology Assessment Study: Full Report

NASA Technical Reports Server (NTRS)

Peterson, John (Editor)

2002-01-01

A team was formed to assess NASA Office of Space Science (OSS) information technology research and development activities. These activities were reviewed for their relevance to OSS missions, for their potential for using products better supplied by industry or other government agencies, and for recommending an information technology (IT) infusion strategy for appropriate products for OSS missions. Assessment scope and methodology are presented. IT needs and interests for future OSS missions and current NASA IT research and development (R&D) are discussed. Non-NASA participants provide overviews of some of their IT R&D programs. Implementation and infusion issues and the findings and recommendations of the assessment team are presented.

WORK PLAN FOR COMPLETING A TECHNOLOGY ASSESSMENT OF WESTERN ENERGY RESOURCE DEVELOPMENT

EPA Science Inventory

This is a work plan for completing the final phase of a three year technology assessment of the development of six energy resources (coal, geothermal, natural gas, oil, oil shale, and uranium) in eight western states (Arizona, Colorado, Montana, New Mexico, North and South Dakota...

Technology evaluation, assessment, modeling, and simulation: the TEAMS capability

NASA Astrophysics Data System (ADS)

Holland, Orgal T.; Stiegler, Robert L.

1998-08-01

The United States Marine Corps' Technology Evaluation, Assessment, Modeling and Simulation (TEAMS) capability, located at the Naval Surface Warfare Center in Dahlgren Virginia, provides an environment for detailed test, evaluation, and assessment of live and simulated sensor and sensor-to-shooter systems for the joint warfare community. Frequent use of modeling and simulation allows for cost effective testing, bench-marking, and evaluation of various levels of sensors and sensor-to-shooter engagements. Interconnectivity to live, instrumented equipment operating in real battle space environments and to remote modeling and simulation facilities participating in advanced distributed simulations (ADS) exercises is available to support a wide- range of situational assessment requirements. TEAMS provides a valuable resource for a variety of users. Engineers, analysts, and other technology developers can use TEAMS to evaluate, assess and analyze tactical relevant phenomenological data on tactical situations. Expeditionary warfare and USMC concept developers can use the facility to support and execute advanced warfighting experiments (AWE) to better assess operational maneuver from the sea (OMFTS) concepts, doctrines, and technology developments. Developers can use the facility to support sensor system hardware, software and algorithm development as well as combat development, acquisition, and engineering processes. Test and evaluation specialists can use the facility to plan, assess, and augment their processes. This paper presents an overview of the TEAMS capability and focuses specifically on the technical challenges associated with the integration of live sensor hardware into a synthetic environment and how those challenges are being met. Existing sensors, recent experiments and facility specifications are featured.

Evaluting the Validity of Technology-Enhanced Educational Assessment Items and Tasks: An Emprical Approach to Studying Item Features and Scoring Rubrics

ERIC Educational Resources Information Center

Thomas, Ally

2016-01-01

With the advent of the newly developed Common Core State Standards and the Next Generation Science Standards, innovative assessments, including technology-enhanced items and tasks, will be needed to meet the challenges of developing valid and reliable assessments in a world of computer-based testing. In a recent critique of the next generation…

The Health Information Technology Competencies Tool: Does It Translate for Nursing Informatics in the United States?

PubMed

Sipes, Carolyn; Hunter, Kathleen; McGonigle, Dee; West, Karen; Hill, Taryn; Hebda, Toni

2017-12-01

Information technology use in healthcare delivery mandates a prepared workforce. The initial Health Information Technology Competencies tool resulted from a 2-year transatlantic effort by experts from the US and European Union to identify approaches to develop skills and knowledge needed by healthcare workers. It was determined that competencies must be identified before strategies are established, resulting in a searchable database of more than 1000 competencies representing five domains, five skill levels, and more than 250 roles. Health Information Technology Competencies is available at no cost and supports role- or competency-based queries. Health Information Technology Competencies developers suggest its use for curriculum planning, job descriptions, and professional development.The Chamberlain College of Nursing informatics research team examined Health Information Technology Competencies for its possible application to our research and our curricular development, comparing it originally with the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools, which examine informatics competencies at four levels of nursing practice. Additional analysis involved the 2015 Nursing Informatics: Scope and Standards of Practice. Informatics is a Health Information Technology Competencies domain, so clear delineation of nursing-informatics competencies was expected. Researchers found TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 differed from Health Information Technology Competencies 2016 in focus, definitions, ascribed competencies, and defined levels of expertise. When Health Information Technology Competencies 2017 was compared against the nursing informatics scope and standards, researchers found an increase in the number of informatics competencies but not to a significant degree. This is not surprising, given that Health Information Technology Competencies includes all healthcare workers, while the TIGER-based Assessment of Nursing Informatics Competencies and Nursing Informatics Competency Assessment of Level 3 and Level 4 tools and the American Nurses Association Nursing Informatics: Scope and Standards of Practice are nurse specific. No clear cross mapping across these tools and the standards of nursing informatics practice exists. Further examination and review are needed to translate Health Information Technology Competencies as a viable tool for nursing informatics use in the US.

Fulfilling a Promise: Standards for Technological Literacy.

ERIC Educational Resources Information Center

Bybee, Rodger W.

2003-01-01

Discusses the place of standards in U.S. education, the development of the Standards for Technological Literacy, and the recent publication of "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards." (Contains 21 references.) (SK)

Supply Chain Sustainability Analysis of Fast Pyrolysis and Hydrotreating Bio-Oil to Produce Hydrocarbon Fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adom, Felix K.; Cai, Hao; Dunn, Jennifer B.

2016-03-01

The Department of Energy’s (DOE) Bioenergy Technology Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of technologies to produce biofuels. These assessments evaluate feedstock production, logistics of transporting the feedstock, and conversion of the feedstock to biofuel. There are two general types of TEAs. A design case is a TEA that outlines a target case for a particular biofuel pathway. It enables identification of data gaps and research andmore » development needs, and provides goals and targets against which technology progress is assessed. On the other hand, a state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual experimental results relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available.« less

Some implications of the technology assessment function for the effective public decision-making process

NASA Technical Reports Server (NTRS)

Mayo, L. H.

1971-01-01

A preliminary provisional assessment of the prospects for the establishment of an adequate technology assessment function and the implications of the assessment function for the public decision process are presented. Effects of the technology assessment function on each phase of the public decision process and briefly explored. Significant implications during the next decade are projected with respect to the following phases: invention and development of alternative means (technological configurations); evaluation, selection and promotion of preferred courses of action; and modification of statutory scheme or social action program as an outcome of continuing monitoring and appraisal.

Technology transfer and international development: Materials and manufacturing technology

NASA Technical Reports Server (NTRS)

1982-01-01

Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.

Technological Magic, Social Change, and Counseling Rituals: The Future of Career Assessment.

ERIC Educational Resources Information Center

Tinsley, Howard E. A.

2000-01-01

Developments that will transform career assessment in the next 30 years include technological advances and demographic and work environment changes. Due to increased automation of assessment and counseling, the effectiveness of career assessment will be even more dependent on the work of vocational psychologists. (SK)

Traditional methods v. new technologies - dilemmas for dietary assessment in large-scale nutrition surveys and studies: a report following an international panel discussion at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, 3 September 2015.

PubMed

Amoutzopoulos, B; Steer, T; Roberts, C; Cade, J E; Boushey, C J; Collins, C E; Trolle, E; de Boer, E J; Ziauddeen, N; van Rossum, C; Buurma, E; Coyle, D; Page, P

2018-01-01

The aim of the present paper is to summarise current and future applications of dietary assessment technologies in nutrition surveys in developed countries. It includes the discussion of key points and highlights of subsequent developments from a panel discussion to address strengths and weaknesses of traditional dietary assessment methods (food records, FFQ, 24 h recalls, diet history with interviewer-assisted data collection) v. new technology-based dietary assessment methods (web-based and mobile device applications). The panel discussion 'Traditional methods v. new technologies: dilemmas for dietary assessment in population surveys', was held at the 9th International Conference on Diet and Activity Methods (ICDAM9), Brisbane, September 2015. Despite respondent and researcher burden, traditional methods have been most commonly used in nutrition surveys. However, dietary assessment technologies offer potential advantages including faster data processing and better data quality. This is a fast-moving field and there is evidence of increasing demand for the use of new technologies amongst the general public and researchers. There is a need for research and investment to support efforts being made to facilitate the inclusion of new technologies for rapid, accurate and representative data.

BBN-Based Portfolio Risk Assessment for NASA Technology R&D Outcome

NASA Technical Reports Server (NTRS)

Geuther, Steven C.; Shih, Ann T.

2016-01-01

The NASA Aeronautics Research Mission Directorate (ARMD) vision falls into six strategic thrusts that are aimed to support the challenges of the Next Generation Air Transportation System (NextGen). In order to achieve the goals of the ARMD vision, the Airspace Operations and Safety Program (AOSP) is committed to developing and delivering new technologies. To meet the dual challenges of constrained resources and timely technology delivery, program portfolio risk assessment is critical for communication and decision-making. This paper describes how Bayesian Belief Network (BBN) is applied to assess the probability of a technology meeting the expected outcome. The network takes into account the different risk factors of technology development and implementation phases. The use of BBNs allows for all technologies of projects in a program portfolio to be separately examined and compared. In addition, the technology interaction effects are modeled through the application of object-oriented BBNs. The paper discusses the development of simplified project risk BBNs and presents various risk results. The results presented include the probability of project risks not meeting success criteria, the risk drivers under uncertainty via sensitivity analysis, and what-if analysis. Finally, the paper shows how program portfolio risk can be assessed using risk results from BBNs of projects in the portfolio.

A Conceptual Methodology for Assessing Acquisition Requirements Robustness against Technology Uncertainties

NASA Astrophysics Data System (ADS)

Chou, Shuo-Ju

2011-12-01

In recent years the United States has shifted from a threat-based acquisition policy that developed systems for countering specific threats to a capabilities-based strategy that emphasizes the acquisition of systems that provide critical national defense capabilities. This shift in policy, in theory, allows for the creation of an "optimal force" that is robust against current and future threats regardless of the tactics and scenario involved. In broad terms, robustness can be defined as the insensitivity of an outcome to "noise" or non-controlled variables. Within this context, the outcome is the successful achievement of defense strategies and the noise variables are tactics and scenarios that will be associated with current and future enemies. Unfortunately, a lack of system capability, budget, and schedule robustness against technology performance and development uncertainties has led to major setbacks in recent acquisition programs. This lack of robustness stems from the fact that immature technologies have uncertainties in their expected performance, development cost, and schedule that cause to variations in system effectiveness and program development budget and schedule requirements. Unfortunately, the Technology Readiness Assessment process currently used by acquisition program managers and decision-makers to measure technology uncertainty during critical program decision junctions does not adequately capture the impact of technology performance and development uncertainty on program capability and development metrics. The Technology Readiness Level metric employed by the TRA to describe program technology elements uncertainties can only provide a qualitative and non-descript estimation of the technology uncertainties. In order to assess program robustness, specifically requirements robustness, against technology performance and development uncertainties, a new process is needed. This process should provide acquisition program managers and decision-makers with the ability to assess or measure the robustness of program requirements against such uncertainties. A literature review of techniques for forecasting technology performance and development uncertainties and subsequent impacts on capability, budget, and schedule requirements resulted in the conclusion that an analysis process that coupled a probabilistic analysis technique such as Monte Carlo Simulations with quantitative and parametric models of technology performance impact and technology development time and cost requirements would allow the probabilities of meeting specific constraints of these requirements to be established. These probabilities of requirements success metrics can then be used as a quantitative and probabilistic measure of program requirements robustness against technology uncertainties. Combined with a Multi-Objective Genetic Algorithm optimization process and computer-based Decision Support System, critical information regarding requirements robustness against technology uncertainties can be captured and quantified for acquisition decision-makers. This results in a more informed and justifiable selection of program technologies during initial program definition as well as formulation of program development and risk management strategies. To meet the stated research objective, the ENhanced TEchnology Robustness Prediction and RISk Evaluation (ENTERPRISE) methodology was formulated to provide a structured and transparent process for integrating these enabling techniques to provide a probabilistic and quantitative assessment of acquisition program requirements robustness against technology performance and development uncertainties. In order to demonstrate the capabilities of the ENTERPRISE method and test the research Hypotheses, an demonstration application of this method was performed on a notional program for acquiring the Carrier-based Suppression of Enemy Air Defenses (SEAD) using Unmanned Combat Aircraft Systems (UCAS) and their enabling technologies. The results of this implementation provided valuable insights regarding the benefits and inner workings of this methodology as well as its limitations that should be addressed in the future to narrow the gap between current state and the desired state.

Early warning and crop condition assessment research

NASA Technical Reports Server (NTRS)

Boatwright, G. O.; Whitehead, V. S.

1986-01-01

The Early Warning Crop Condition Assessment Project of AgRISTARS was a multiagency and multidisciplinary effort. Its mission and objectives were centered around development and testing of remote-sensing techniques that enhance operational methodologies for global crop-condition assessments. The project developed crop stress indicators models that provide data filter and alert capabilities for monitoring global agricultural conditions. The project developed a technique for using NOAA-n satellite advanced very-high-resolution radiometer (AVHRR) data for operational crop-condition assessments. This technology was transferred to the Foreign Agricultural Service of the USDA. The project developed a U.S. Great Plains data base that contains various meteorological parameters and vegetative index numbers (VIN) derived from AVHRR satellite data. It developed cloud screening techniques and scan angle correction models for AVHRR data. It also developed technology for using remotely acquired thermal data for crop water stress indicator modeling. The project provided basic technology including spectral characteristics of soils, water, stressed and nonstressed crop and range vegetation, solar zenith angle, and atmospheric and canopy structure effects.

Optical Manufacturing and Testing Requirements Identified by the NASA Science Instruments, Observatories and Sensor Systems Technology Assessment

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Barney, Rich; Bauman, Jill; Feinberg, Lee; Mcleese, Dan; Singh, Upendra

2011-01-01

In August 2010, the NASA Office of Chief Technologist (OCT) commissioned an assessment of 15 different technology areas of importance to the future of NASA. Technology assessment #8 (TA8) was Science Instruments, Observatories and Sensor Systems (SIOSS). SIOSS assess the needs for optical technology ranging from detectors to lasers, x-ray mirrors to microwave antenna, in-situ spectrographs for on-surface planetary sample characterization to large space telescopes. The needs assessment looked across the entirety of NASA and not just the Science Mission Directorate. This paper reviews the optical manufacturing and testing technologies identified by SIOSS which require development in order to enable future NASA high priority missions.

Research on the development of green chemistry technology assessment techniques: a material reutilization case.

PubMed

Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

2015-01-01

This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

Revitalized militarily critical technologies program

NASA Astrophysics Data System (ADS)

Wick, Raymond V.

2005-04-01

The Department of Defense (DoD) Militarily Critical Technologies Program (MCTP) provides a systematic, ongoing assessment and analysis of goods and technologies to determine those that would permit significant advances in the development, production and use of military capabilities of potential adversaries and those that are being developed worldwide that have the potential to significantly enhance or degrade US military capabilities in the future. The program's objective is to characterize the technologies, including quantitative values and parameters, and assess worldwide technology capabilities. The MCTP is composed of two sets of documents, the well known and often referenced one, the MCTL, and a second one, a more recently added list called the Developing Science and Technologies List (DSTL). Both are products of the MCTP process, however, the later is primarily used by DDR&E and other government organizations and agencies to aid in the prioritization and understanding of new technologies being developed worldwide. Technologies are selected for the MCTL and the DSTL through the deliberation and consensus of Technology Working Groups (TWGs). TWGs continually screen technologies and nominate items to be added or removed from the MCTL and the DSTL as appropriate. Working within an informal structure, TWG members are composed of government, industry and academia subject matter experts, who strive to produce precise and objective analyses across each technology areas. This process and details of the current MCTP are outlined in this poster paper. This paper focuses on the solid state laser technology area, using it as an example of the MCTP's product of assessing, identifying, and quantifying militarily critical technology parameters.

A model for technology assessment as applied to closed loop infusion systems. Technology Assessment Task Force of the Society of Critical Care Medicine.

PubMed

Jastremski, M; Jastremski, C; Shepherd, M; Friedman, V; Porembka, D; Smith, R; Gonzales, E; Swedlow, D; Belzberg, H; Crass, R

1995-10-01

To test a model for the assessment of critical care technology on closed loop infusion control, a technology that is in its early stages of development and testing on human subjects. A computer-assisted search of the English language literature and reviews of the gathered data by experts in the field of closed loop infusion control systems. Studies relating to closed loop infusion control that addressed one or more of the questions contained in our technology assessment template were analyzed. Study design was not a factor in article selection. However, the lack of well-designed clinical outcome studies was an important factor in determining our conclusions. A focus person summarized the data from the selected studies that related to each of the assessment questions. The preliminary data summary developed by the focus person was further analyzed and refined by the task force. Experts in closed loop systems were then added to the group to review the summary provided by the task force. These experts' comments were considered by the task force and this final consensus report was developed. Closed loop system control is a technological concept that may be applicable to several aspects of critical care practice. This is a technology in the early stages of evolution and much more research and data are needed before its introduction into usual clinical practice. Furthermore, each specific application and each device for each application (e.g., nitroprusside infusion, ventilator adjustment), although based on the same technological concept, are sufficiently different in terms of hardware and computer algorithms to require independent validation studies. Closed loop infusion systems may have a role in critical care practice. However, for most applications, further development is required to move this technology from the innovation phase to the point where it can be evaluated so that its role in critical car practice can be defined. Each application of closed loop infusion systems must be independently validated by appropriately designed research studies. Users should be provided with the clinical parameters driving each closed loop system so that they can ensure that it agrees with their opinion of acceptable medical practice. Clinical researchers and leaders in industry should collaborate to perform the scientifically valid, outcome-based research that is necessary to evaluate the effect of this new technology. The original model we developed for technology assessment required the addition of several more questions to produce a complete analysis of an emerging technology. An emerging technology should be systematically assessed (using a model such as the model developed by the Society of Critical Care Medicine), before its introduction into clinical practice in order to provide a focus for human outcome validation trials and to minimize the possibility of widespread use of an unproven technology.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polsky, Yarom; Capuano, Louis; Finger, John

2008-12-01

This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

Technical analysis of US Army Weapons Systems and related advanced technologies of military interest. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1991-06-14

This report summarizes the activities and accomplishments of an US Army technology security project designed to identify and develop effective policy guidelines for militarily critical technologies in specific Army systems and in broad generic technology areas of military interest, Individual systems analyses are documented in separate Weapons Systems Technical Assessments (WSTAs) and the general generic technology areas are evaluated in the Advanced Technology Assessment Reports (ATARs), However, specific details of these assessments are not addressed here, only recommendations regarding aspects of the defined approach, methodology, and format are provided and discussed.

Development and validation of the computer technology literacy self-assessment scale for Taiwanese elementary school students.

PubMed

Chang, Chiung-Sui

2008-01-01

The purpose of this study was to describe the development and validation of an instrument to identify various dimensions of the computer technology literacy self-assessment scale (CTLS) for elementary school students. The instrument included five CTLS dimensions (subscales): the technology operation skills, the computer usages concepts, the attitudes toward computer technology, the learning with technology, and the Internet operation skills. Participants were 1,539 elementary school students in Taiwan. Data analysis indicated that the instrument developed in the study had satisfactory validity and reliability. Correlations analysis supported the legitimacy of using multiple dimensions in representing students' computer technology literacy. Significant differences were found between male and female students, and between grades on some CTLS dimensions. Suggestions are made for use of the instrument to examine complicated interplays between students' computer behaviors and their computer technology literacy.

A systematic collaborative process for assessing launch vehicle propulsion technologies

NASA Astrophysics Data System (ADS)

Odom, Pat R.

1999-01-01

A systematic, collaborative process for prioritizing candidate investments in space transportation systems technologies has been developed for the NASA Space Transportation Programs Office. The purpose of the process is to provide a repeatable and auditable basis for selecting technology investments to enable achievement of NASA's strategic space transportation objectives. The paper describes the current multilevel process and supporting software tool that has been developed. Technologies are prioritized across system applications to produce integrated portfolios for recommended funding. An example application of the process to the assessment of launch vehicle propulsion technologies is described and illustrated. The methodologies discussed in the paper are expected to help NASA and industry ensure maximum returns from technology investments under constrained budgets.

The Utility of Using Immersive Virtual Environments for the Assessment of Science Inquiry Learning

ERIC Educational Resources Information Center

Code, Jillianne; Clarke-Midura, Jody; Zap, Nick; Dede, Chris

2013-01-01

Determining the effectiveness of any educational technology depends upon teachers' and learners' perception of the functional utility of that tool for teaching, learning, and assessment. The Virtual Performance project at Harvard University is developing and studying the feasibility of using immersive technology to develop performance…

ENERGY FROM THE WEST: A PROGRESS REPORT OF A TECHNOLOGY ASSESSMENT OF WESTERN ENERGY RESOURCE DEVELOPMENT. EXECUTIVE SUMMARY

EPA Science Inventory

This report covers a three year technology assessment of the development of six energy resources (coal, geothermal, natural gas, oil, oil shale, and uranium) in eight western states (Arizona, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming) during the period fr...

Summary assessment of solar thermal parabolic dish technology for electrical power generation

NASA Technical Reports Server (NTRS)

Penda, P. L.; Fujita, T.; Lucas, J. W.

1985-01-01

An assessment is provided of solar thermal parabolic dish technology for electrical power generation. The assessment is based on the development program undertaken by the Jet Propulsion Laboratory for the U.S. Department of Energy and covers the period from the initiation of the program in 1976 through mid-1984. The program was founded on developing components and subsystems that are integrated into parabolic dish power modules for test and evaluation. The status of the project is summarized in terms of results obtained through testing of modules, and the implications of these findings are assessed in terms of techno-economic projections and market potential. The techno-economic projections are based on continuation of an evolutionary technological development program and are related to the accomplishments of the program as of mid-1984. The accomplishments of the development effort are summarized for each major subsystem including concentrators, receivers, and engines. The ramifications of these accomplishments are assessed in the context of developmental objectives and strategies.

NASA Subsonic Rotary Wing Project-Multidisciplinary Analysis and Technology Development: Overview

NASA Technical Reports Server (NTRS)

Yamauchi, Gloria K.

2009-01-01

This slide presentation reviews the objectives of the Multidisciplinary Analysis and Technology Development (MDATD) in the Subsonic Rotary Wing project. The objectives are to integrate technologies and analyses to enable advanced rotorcraft and provide a roadmap to guide Level 1 and 2 research. The MDATD objectives will be met by conducting assessments of advanced technology benefits, developing new or enhanced design tools, and integrating Level 2 discipline technologies to develop and enable system-level analyses and demonstrations.

Toward identifying specification requirements for digital bone-anchored prosthesis design incorporating substructure fabrication: a pilot study.

PubMed

Eggbeer, Dominic; Bibb, Richard; Evans, Peter

2006-01-01

This paper is the first in a series that aims to identify the specification requirements for advanced digital technologies that may be used to design and fabricate complex, soft tissue facial prostheses. Following a review of previously reported techniques, appropriate and currently available technologies were selected and applied in a pilot study. This study uses a range of optical surface scanning, computerized tomography, computer-aided design, and rapid prototyping technologies to capture, design, and fabricate a bone-anchored auricular prosthesis, including the retentive components. The techniques are assessed in terms of their effectiveness, and the results are used to identify future research and specification requirements to direct developments. The case study identifies that while digital technologies may be used to design implant-retained facial prostheses, many limitations need to be addressed to make the techniques clinically viable. It also identifies the need to develop a more robust specification that covers areas such as resolution, accuracy, materials, and design, against which potential technologies may be assessed. There is a need to develop a specification against which potential technologies may be assessed for their suitability in soft tissue facial prosthetics. The specification will be developed using further experimental research studies.

[Advances and challenges to the Brazilian policy of health technology management].

PubMed

Silva, Hudson P; Petramale, Clarice A; Elias, Flavia T S

2012-12-01

The Brazilian Ministry of Health has institutionalized two articulated processes in the field of health technology management: (i) the production, systematization and dissemination of health technology assessment, and (ii) the adoption of a flow for the incorporation, exclusion or alteration of new technologies by the Brazilian National Health System. Several advances have been made, such as standardization of methods; production and promotion of studies; institutional development and international cooperation in the area of health technology assessment; definition of the necessary requirements for the presentation of proposals; definition of deadlines; and expansion of the segments that compose the committee that is responsible for the analysis and recommendation. However, some difficulties remain: health technology assessment activities concentrated in the Ministry; low sustainability of the activities of production and dissemination of the assessments; low penetration of health technology assessment in health care institutions; activities of assessment/incorporation with low participation of users; non-transparent decision-making processes; and low integration of the health policy with the scientific and technological policy.

[Use of health technology assessment in decision-making processes by the Brazilian Ministry of Health on the incorporation of technologies in the Brazilian Unified National Health System].

PubMed

Novaes, Hillegonda Maria Dutilh; Elias, Flávia Tavares Silva

2013-11-01

Policies for scientific development and knowledge production in health have increased in recent decades. In Brazil, incentives for research, development, and innovation have been part of the National Health Act since 1990, and science and technology policies for health, including health technology assessment (HTA), have been implemented since 1994, as in many other countries. The emphasis is now on impact evaluation of HTA policies in the incorporation of technologies by health services and systems. The article presents a case study of HTA utilization in decision-making processes in the Brazilian Ministry of Health, analyzing participation by the Department of Science and Technology (DECIT), responsible for the production of assessments used in the Commission on Technology Incorporation (CITEC) of the Ministry of Health from 2008 to 2010. CITEC used 103 assessments in its decisions during this period, of which DECIT produced 80%. Nearly all were literature reviews on therapeutic technologies. An increase in knowledge production was observed. A methodological and political learning process appears to have occurred in the use of HTA, but its impact on Brazilian Unified National Health System remains unclear.

Power systems for future missions

NASA Technical Reports Server (NTRS)

Gill, S. P.; Frye, P. E.; Littman, Franklin D.; Meisl, C. J.

1994-01-01

A comprehensive scenario of future missions was developed and applicability of different power technologies to these missions was assessed. Detailed technology development roadmaps for selected power technologies were generated. A simple methodology to evaluate economic benefits of current and future power system technologies by comparing Life Cycle Costs of potential missions was developed. The methodology was demonstrated by comparing Life Cycle Costs for different implementation strategies of DIPS/CBC technology to a selected set of missions.

Technology assessment and requirements analysis: a process to facilitate decision making in picture archiving and communications system implementation.

PubMed

Radvany, M G; Chacko, A K; Richardson, R R; Grazdan, G W

1999-05-01

In a time of decreasing resources, managers need a tool to manage their resources effectively, support clinical requirements, and replace aging equipment in order to ensure adequate clinical care. To do this successfully, one must be able to perform technology assessment and capital equipment asset management. The lack of a commercial system that adequately performed technology needs assessment and addressed the unique needs of the military led to the development of an in-house Technology Assessment and Requirements Analysis (TARA) program. The TARA is a tool that provides an unbiased review of clinical operations and the resulting capital equipment requirements for military hospitals. The TARA report allows for the development of acquisition strategies for new equipment, enhances personnel management, and improves and streamlines clinical operations and processes.

NASA Langley Systems Analysis & Concepts Directorate Technology Assessment/Portfolio Analysis

NASA Technical Reports Server (NTRS)

Cavanaugh, Stephen; Chytka, Trina; Arcara, Phil; Jones, Sharon; Stanley, Doug; Wilhite, Alan W.

2006-01-01

Systems analysis develops and documents candidate mission and architectures, associated system concepts, enabling capabilities and investment strategies to achieve NASA s strategic objectives. The technology assessment process connects the mission and architectures to the investment strategies. In order to successfully implement a technology assessment, there is a need to collect, manipulate, analyze, document, and disseminate technology-related information. Information must be collected and organized on the wide variety of potentially applicable technologies, including: previous research results, key technical parameters and characteristics, technology readiness levels, relationships to other technologies, costs, and potential barriers and risks. This information must be manipulated to facilitate planning and documentation. An assessment is included of the programmatic and technical risks associated with each technology task as well as potential risk mitigation plans. Risks are assessed and tracked in terms of likelihood of the risk occurring and consequences of the risk if it does occur. The risk assessments take into account cost, schedule, and technical risk dimensions. Assessment data must be simplified for presentation to decision makers. The Systems Analysis and Concepts Directorate (SACD) at NASA Langley Research Center has a wealth of experience in performing Technology Assessment and Portfolio Analysis as this has been a business line since 1978.

Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

NASA Technical Reports Server (NTRS)

Price, Kent M.; Holdridge, Mark; Odubiyi, Jide; Jaworski, Allan; Morgan, Herbert K.

1991-01-01

The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network.

Integration of e-Management, e-Development and e-Learning Technologies for Blended Course Delivery

ERIC Educational Resources Information Center

Johnson, Lynn E.; Tang, Michael

2005-01-01

This paper describes and assesses a pre-engineering curriculum development project called Foundations of Engineering, Science and Technology (FEST). FEST integrates web-based technologies into an inter-connected system to enable delivery of a blended program at multiple institutions. Tools and systems described include 1) technologies to deliver…

The impact of "omic" and imaging technologies on assessing the host immune response to biodefence agents.

PubMed

Tree, Julia A; Flick-Smith, Helen; Elmore, Michael J; Rowland, Caroline A

2014-01-01

Understanding the interactions between host and pathogen is important for the development and assessment of medical countermeasures to infectious agents, including potential biodefence pathogens such as Bacillus anthracis, Ebola virus, and Francisella tularensis. This review focuses on technological advances which allow this interaction to be studied in much greater detail. Namely, the use of "omic" technologies (next generation sequencing, DNA, and protein microarrays) for dissecting the underlying host response to infection at the molecular level; optical imaging techniques (flow cytometry and fluorescence microscopy) for assessing cellular responses to infection; and biophotonic imaging for visualising the infectious disease process. All of these technologies hold great promise for important breakthroughs in the rational development of vaccines and therapeutics for biodefence agents.

Psychometric evaluation of a new assessment of the ability to manage technology in everyday life.

PubMed

Malinowsky, Camilla; Nygård, Louise; Kottorp, Anders

2011-03-01

Technology increasingly influences the everyday lives of most people, and the ability to manage technology can be seen as a prerequisite for participation in everyday occupations. However, knowledge of the ability and skills required for management of technology is sparse. This study aimed to validate a new observation-based assessment, the Management of Everyday Technology Assessment (META). The META has been developed to assess the ability to manage technology in everyday life. A sample of 116 older adults with and without cognitive impairment were observed and interviewed by the use of the META when managing their everyday technology at home. The results indicate that the META demonstrates acceptable person response validity and technology goodness-of-fit. Additionally, the META can separate individuals with higher ability from individuals with lower ability to manage everyday technology. The META can be seen as a complement to existing ADL assessment techniques and is planned to be used in both research and practice.

NASA's Microgravity Technology Report: Summary of Activities 1997

NASA Technical Reports Server (NTRS)

Woodard, Dan

1998-01-01

The purpose of the 1997 NASA Microgravity Technology Report is to update the Microgravity Research Program's technology development policy and to present and assess current technology related activities and requirements identified within its research and technology disciplines.

Summary of 2017 NASA Workshop on Assessment of Advanced Battery Technologies for Aerospace Applications

NASA Technical Reports Server (NTRS)

Misra, Ajay

2018-01-01

A workshop on assessment of battery technologies for future aerospace applications was held in Cleveland, OH on August 16-17. The focus of the workshop, hosted by NASA GRC, was to assess (1) the battery needs for future aerospace missions, (2) the state of battery technology and projected technology advances, and (3) the need for additional investments for future aerospace missions. The workshop had 109 attendees that included internationally recognized technology leaders from academia and national laboratories, high level executives from government and industry, small businesses, and startup companies. A significant portion of the workshop was focused on batteries for electrified aircraft. The presentation will summarize the finding on the state of battery technologies for electrified aircraft and will include assessment of current state of battery technology, gaps in battery technology for application in electrified aircraft, and recommended technology development options for meeting near-term and long-term needs of electrified aircraft.

Rapid Technology Assessment via Unified Deployment of Global Optical and Virtual Diagnostics

NASA Technical Reports Server (NTRS)

Jordan, Jeffrey D.; Watkins, A. Neal; Fleming, Gary A.; Leighty, Bradley D.; Schwartz, Richard J.; Ingram, JoAnne L.; Grinstead, Keith D., Jr.; Oglesby, Donald M.; Tyler, Charles

2003-01-01

This paper discusses recent developments in rapid technology assessment resulting from an active collaboration between researchers at the Air Force Research Laboratory (AFRL) at Wright Patterson Air Force Base (WPAFB) and the NASA Langley Research Center (LaRC). This program targets the unified development and deployment of global measurement technologies coupled with a virtual diagnostic interface to enable the comparative evaluation of experimental and computational results. Continuing efforts focus on the development of seamless data translation methods to enable integration of data sets of disparate file format in a common platform. Results from a successful low-speed wind tunnel test at WPAFB in which global surface pressure distributions were acquired simultaneously with model deformation and geometry measurements are discussed and comparatively evaluated with numerical simulations. Intensity- and lifetime-based pressure-sensitive paint (PSP) and projection moire interferometry (PMI) results are presented within the context of rapid technology assessment to enable simulation-based R&D.

Technology readiness levels for advanced nuclear fuels and materials development

DOE PAGES

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.; ...

2016-12-23

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Technology readiness levels for advanced nuclear fuels and materials development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carmack, W. J.; Braase, L. A.; Wigeland, R. A.

The Technology Readiness Level (TRL) process is used to quantitatively assess the maturity of a given technology. It was pioneered by the National Aeronautics and Space Administration (NASA) in the 1980s to develop and deploy new systems for space applications. The process was subsequently adopted by the Department of Defense (DoD) to develop and deploy new technology and systems for defense applications as well as the Department of Energy (DOE) to evaluate the maturity of new technologies in major construction projects. Advanced nuclear fuels and materials development is a critical technology needed for improving the performance and safety of currentmore » and advanced reactors, and ultimately closing the nuclear fuel cycle. Because deployment of new nuclear fuel forms requires a lengthy and expensive research, development, and demonstration program, applying the TRL concept to the advanced fuel development program is very useful as a management, communication and tracking tool. Furthermore, this article provides examples regarding the methods by which TRLs are currently used to assess the maturity of nuclear fuels and materials under development in the DOE Fuel Cycle Research and Development (FCRD) Program within the Advanced Fuels Campaign (AFC).« less

Space Station end effector strategy study

NASA Technical Reports Server (NTRS)

Katzberg, Stephen J.; Jensen, Robert L.; Willshire, Kelli F.; Satterthwaite, Robert E.

1987-01-01

The results of a study are presented for terminology definition, identification of functional requirements, technolgy assessment, and proposed end effector development strategies for the Space Station Program. The study is composed of a survey of available or under-developed end effector technology, identification of requirements from baselined Space Station documents, a comparative assessment of the match between technology and requirements, and recommended strategies for end effector development for the Space Station Program.

Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk

DTIC Science & Technology

2017-10-01

AWARD NUMBER: W81XWH-15-1-0632 TITLE: Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk PRINCIPAL INVESTIGATOR: Brian...CONTRACT NUMBER Technologies for Assessing Behavioral and Cognitive Markers of Suicide Risk 5b. GRANT NUMBER W81XWH-15-1-0632 5c. PROGRAM...Public Release; Distribution Unlimited 13. SUPPLEMENTARY NOTES 14. ABSTRACT The primary aim of the proposed project is to develop cognitive and

Assessment Inventories, Surveys, and Templates for Evaluating Educational Technology Regional and Local Assistance Programs. Phase IV of the Comprehensive Study of Educational Technology Programs Authorized from 1984-1992.

ERIC Educational Resources Information Center

Far West Lab. for Educational Research and Development, San Francisco, CA.

This report on Phase IV, of a four-phase study, provided for the development of evaluation templates and instruments to be used by the California Department of Education to facilitate systematic assessment of state funded educational technology programs and projects. These assessment documents comprised the major data collection sources for the…

Embedding technology into inter-professional best practices in home safety evaluation.

PubMed

Burns, Suzanne Perea; Pickens, Noralyn Davel

2017-08-01

To explore inter-professional home evaluators' perspectives and needs for building useful and acceptable decision-support tools for the field of home modifications. Twenty semi-structured interviews were conducted with a range of home modification professionals from different regions of the United States. The interview transcripts were analyzed with a qualitative, descriptive, perspective approach. Technology supports current best practice and has potential to inform decision making through features that could enhance home evaluation processes, quality, efficiency and inter-professional communication. Technological advances with app design have created numerous opportunities for the field of home modifications. Integrating technology and inter-professional best practices will improve home safety evaluation and intervention development to meet client-centred and societal needs. Implications for rehabilitation Understanding home evaluators technology needs for home safety evaluations contributes to the development of app-based assessments. Integrating inter-professional perspectives of best practice and technological needs in an app for home assessments improves processes. Novice and expert home evaluators would benefit from decision support systems embedded in app-based assessments. Adoption of app-based assessment would improve efficiency while remaining client-centred.

Exploring the consistency, transparency and portability of dental technology education: benchmarking across Norway, Ireland and Australia.

PubMed

Myhrer, T; Evans, J L; Haugen, H K; Gorman, C; Kavanagh, Y; Cameron, A B

2016-08-01

Dental technology programmes of study must prepare students to practice in a broad range of contemporary workplaces. Currently, there is limited evidence to benchmark dental technology education - locally, nationally or internationally. This research aims to improve consistency, transparency and portability of dental technology qualifications across three countries. Data were accessed from open-source curriculum documents and five calibrated assessment items. Three institutions collaborated with Oslo and Akershus University College, Norway; Trinity College Dublin, Ireland; and Griffith University, Australia. From these, 29-44 students completed 174 assessments. The curricula reflect the community needs of each country and display common themes that underpin professional dental technology practice. Assessment results differed between institutions but no more than a normal distribution. Face-to-face assessment moderation was critical to achieve consistency. This collaborative research has led to the development of a set of guidelines for other dental technology education providers interested in developing or aligning courses internationally to enhance the portability of qualifications. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Technology assessment of future intercity passenger transportation systems. Volume 6: Impact assessment

NASA Technical Reports Server (NTRS)

1976-01-01

Consequences that might occur if certain technological developments take place in intercity transportation are described. These consequences are broad ranging, and include economic, environmental, social, institutional, energy-related, and transportation service implications. The possible consequences are traced through direct (primary) impacts to indirect (secondary, tertiary, etc.) impacts. Chains of consequences are traced, reaching as far beyond the original transportation cause as is necessary to identify all impacts felt to be influenced significantly by the technological development considered.

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

ENVIRONMENTAL IMPACT ASSESSMENT OF A HEALTH TECHNOLOGY: A SCOPING REVIEW.

PubMed

Polisena, Julie; De Angelis, Gino; Kaunelis, David; Gutierrez-Ibarluzea, Iñaki

2018-06-13

The Health Technology Expert Review Panel is an advisory body to Canadian Agency for Drugs and Technologies in Health (CADTH) that develops recommendations on health technology assessments (HTAs) for nondrug health technologies using a deliberative framework. The framework spans several domains, including the environmental impact of the health technology(ies). Our research objective was to identify articles on frameworks, methods or case studies on the environmental impact assessment of health technologies. A literature search in major databases and a focused gray literature search were conducted. The main search concepts were HTA and environmental impact/sustainability. Eligible articles were those that described a conceptual framework or methods used to conduct an environmental assessment of health technologies, and case studies on the application of an environmental assessment. From the 1,710 citations identified, thirteen publications were included. Two articles presented a framework to incorporate environmental assessment in HTAs. Other approaches described weight of evidence practices and comprehensive and integrated environmental impact assessments. Central themes derived include transparency and repeatability, integration of components in a framework or of evidence into a single outcome, data availability to ensure the accuracy of findings, and familiarity with the approach used. Each framework and methods presented have different foci related to the ecosystem, health economics, or engineering practices. Their descriptions suggested transparency, repeatability, and the integration of components or of evidence into a single outcome as their main strengths. Our review is an initial step of a larger initiative by CADTH to develop the methods and processes to address the environmental impact question in an HTA.

Communications Technology Assessment for the Unmanned Aircraft System (UAS) Control and Non-Payload Communications (CNPC) Link

NASA Technical Reports Server (NTRS)

Bretmersky, Steven C.; Bishop, William D.; Dailey, Justin E.; Chevalier, Christine T.

2014-01-01

The National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) is performing communications systems research for the Unmanned Aircraft System (UAS) in the National Airspace System (NAS) Project. One of the goals of the communications element is to select and test a communications technology for the UAS Control and Non-Payload Communications (CNPC) link. The GRC UAS Modeling and Simulation (M/S) Sub Team will evaluate the performance of several potential technologies for the CNPC link through detailed software simulations. In parallel, an industry partner will implement a technology in hardware to be used for flight testing. The task necessitated a technical assessment of existing Radio Frequency (RF) communications technologies to identify the best candidate systems for use as the UAS CNPC link. The assessment provides a basis for selecting the technologies for the M/S effort and the hardware radio design. The process developed for the technical assessments for the Future Communications Study1 (FCS) was used as an initial starting point for this assessment. The FCS is a joint Federal Aviation Administration (FAA) and Eurocontrol study on technologies for use as a future aeronautical communications link. The FCS technology assessment process methodology can be applied to the UAS CNPC link; however the findings of the FCS are not directly applicable because of different requirements between a CNPC link and a general aeronautical data link. Additional technologies were added to the potential technologies list from the State of the Art Unmanned Aircraft System Communication Assessment developed by NASA GRC2. This document investigates the state of the art of communications as related to UAS. A portion of the document examines potential communications systems for a UAS communication architecture. Like the FCS, the state of the art assessment surveyed existing communications technologies. It did not, however, perform a detailed assessment of the technology necessary to recommend a technology for the UAS CNPC link. The technical assessment process, as shown in Figure 1, consists of the following steps. First, candidate RF communications technologies are identified. An initial review of each of these technologies is then performed to determine if the technology appears to be a good candidate and requires further review. Any technology that can be shown to be inadequate at that point is removed from consideration to allow for more detailed analysis of the remaining technologies. Criteria for the detailed assessments are defined and a scoring methodology is devised. This is followed by the detailed review and scoring of each technology. The least favorable technologies are removed during the process until only the few best candidates remain.

Chemical and biological sensing needs for health effects studies

NASA Astrophysics Data System (ADS)

Breysse, Patrick N.

2012-06-01

Exposure assessment is an integral component of occupational and environmental epidemiology, risk assessment and management, as well as regulatory compliance. For the most part, air sampling and analysis tools used in occupational and environmental exposure assessments are based on technologies that have changed little since the 1970s. In many cases the lack of simple, inexpensive, exposure assessment technologies has limited epidemiologists' and risk assessors' ability to evaluate the environmental and occupational causes of disease. While there have been tremendous investments and advances in medical diagnostic and biomonitoring technologies (e.g., glucose testing, human genetics), there has been less effort invested in advancing the science of exposure assessment. Recent developments in sensor technology have focused on medical and homeland security applications. Developing and applying new sensors to health effects studies can revolutionize the way epidemiologic studies are conducted. Time-series studies that investigate short-term (hours to days) changes in exposure that are linked to changes in health care encounters, symptoms, and biological markers of preclinical disease and/or susceptibility are needed to more fully evaluate the impact of chemicals and other agents on health. Current sampling technology limits our ability to assess time-varying concentrations. The purpose of this paper is to discuss the current state of air sampling and health assessment and the potential application of novel sensor technology for use in health effects studies.

Student Interest in Technology and Science (SITS) Survey: Development, Validation, and Use of a New Instrument

ERIC Educational Resources Information Center

Romine, William; Sadler, Troy D.; Presley, Morgan; Klosterman, Michelle L.

2014-01-01

This study presents the systematic development, validation, and use of a new instrument for measuring student interest in science and technology. The Student Interest in Technology and Science (SITS) survey is composed of 5 sub-sections assessing the following dimensions: interest in learning science, using technology to learn science, science…

1983 LTA technology assessment

NASA Technical Reports Server (NTRS)

Ashford, R. L.; Browning, R. G. E.; Levitt, B. B.; Mayer, N. J.; Woodward, D. E.

1983-01-01

Several aspects of LTA (lighter-than-air) technology development are reviewed. Technological developments of classical airships through 1974 are examined. A brief historical and technological summary of five specialized LTA equipment concepts is presented: metal-clad airships, free balloons, semibuoyant vehicles, high-altitude platforms, and tethered aerostats. Current LTA technology developments are reviewed with particular emphasis on VTOL airships capable of heavy lift and on long endurance types for coastal maritime patrol. Finally, the future prospects of LTA system development are considered with attention given to manned conventional and hybrid vehicles, tethered vehicles, and RPVs.

An Assessment of the Technology of Automated Rendezvous and Capture in Space

NASA Technical Reports Server (NTRS)

Polites, M. E.

1998-01-01

This paper presents the results of a study to assess the technology of automated rendezvous and capture (AR&C) in space. The outline of the paper is as follows. First, the history of manual and automated rendezvous and capture and rendezvous and dock is presented. Next, the need for AR&C in space is established. Then, today's technology and ongoing technology efforts related to AR&C in space are reviewed. In light of these, AR&C systems are proposed that meet NASA's future needs, but can be developed in a reasonable amount of time with a reasonable amount of money. Technology plans for developing these systems are presented; cost and schedule are included.

Health care technology assessment

NASA Astrophysics Data System (ADS)

Goodman, Clifford

1994-12-01

The role of technology in the cost of health care is a primary issue in current debates concerning national health care reform. The broad scope of studies for understanding technological impacts is known as technology assessment. Technology policy makers can improve their decision making by becoming more aware, and taking greater advantage, of key trends in health care technology assessment (HCTA). HCTA is the systematic evaluation of the properties, impacts, and other attributes of health care technologies, including: technical performance; clinical safety and efficacy/effectiveness; cost-effectiveness and other economic attributes; appropriate circumstances/indications for use; and social, legal, ethical, and political impacts. The main purpose of HCTA is to inform technology-related policy making in health care. Among the important trends in HCTA are: (1) proliferation of HCTA groups in the public and private sectors; (2) higher standards for scientific evidence concerning technologies; (3) methodological development in cost analyses, health-related quality of life measurement, and consolidation of available scientific evidence (e.g., meta-analysis); (4) emphasis on improved data on how well technologies work in routine practice and for traditionally under-represented patient groups; (5) development of priority-setting methods; (6) greater reliance on medical informatics to support and disseminate HCTA findings.

The HTA core model: a novel method for producing and reporting health technology assessments.

PubMed

Lampe, Kristian; Mäkelä, Marjukka; Garrido, Marcial Velasco; Anttila, Heidi; Autti-Rämö, Ilona; Hicks, Nicholas J; Hofmann, Björn; Koivisto, Juha; Kunz, Regina; Kärki, Pia; Malmivaara, Antti; Meiesaar, Kersti; Reiman-Möttönen, Päivi; Norderhaug, Inger; Pasternack, Iris; Ruano-Ravina, Alberto; Räsänen, Pirjo; Saalasti-Koskinen, Ulla; Saarni, Samuli I; Walin, Laura; Kristensen, Finn Børlum

2009-12-01

The aim of this study was to develop and test a generic framework to enable international collaboration for producing and sharing results of health technology assessments (HTAs). Ten international teams constructed the HTA Core Model, dividing information contained in a comprehensive HTA into standardized pieces, the assessment elements. Each element contains a generic issue that is translated into practical research questions while performing an assessment. Elements were described in detail in element cards. Two pilot assessments, designated as Core HTAs were also produced. The Model and Core HTAs were both validated. Guidance on the use of the HTA Core Model was compiled into a Handbook. The HTA Core Model considers health technologies through nine domains. Two applications of the Model were developed, one for medical and surgical interventions and another for diagnostic technologies. Two Core HTAs were produced in parallel with developing the model, providing the first real-life testing of the Model and input for further development. The results of formal validation and public feedback were primarily positive. Development needs were also identified and considered. An online Handbook is available. The HTA Core Model is a novel approach to HTA. It enables effective international production and sharing of HTA results in a structured format. The face validity of the Model was confirmed during the project, but further testing and refining are needed to ensure optimal usefulness and user-friendliness. Core HTAs are intended to serve as a basis for local HTA reports. Core HTAs do not contain recommendations on technology use.

Materials technology assessment for a 1050 K Stirling space engine design

NASA Technical Reports Server (NTRS)

Scheuermann, Coulson M.; Dreshfield, Robert L.; Gaydosh, Darrell J.; Kiser, James D.; Mackay, Rebecca A.; Mcdaniels, David L.; Petrasek, Donald W.; Vannucci, Raymond D.; Bowles, Kenneth J.; Watson, Gordon K.

1988-01-01

An assessment of materials technology and proposed materials selection was made for the 1050 K (superalloy) Stirling Space Engine design. The objectives of this assessment were to evaluate previously proposed materials selections, evaluate the current state-of-the-art materials, propose potential alternate materials selections and identify research and development efforts needed to provide materials that can meet the stringent system requirements. This assessment generally reaffirmed the choices made by the contractor. However, in many cases alternative choices were described and suggestions for needed materials and fabrication research and development were made.

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

Sandia National Laboratories: Sandia Enabled Communications and

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Licensing & Technology Transfer Browse Technology Portfolios Technology Partnerships Business, Industry

K-12 Professional Learning Communities (PLCs) in a Rural School District on the High Plains of Texas: Mechanism for Teacher Support of Innovative Formative Assessment and Instruction with Technology (iFAIT)

ERIC Educational Resources Information Center

Talkmitt, Marcia Joy

2013-01-01

The purpose of this study was to explore the evolution of collaborative practices of PLCs as they emerge when using technology based formative assessment via iFAIT or innovative Formative Assessment with Instruction and Technology developed by the researcher using audience response systems and the online data compiler, Eduphoria!. This study used…

Engine/airframe compatibility studies for supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

1975-01-01

Technology assessment studies were conducted to provide an updated technology base from which an advanced supersonic cruise aircraft can be produced with a high probability of success. An assessment of the gains available through the application of advanced technologies in aerodynamics, propulsion, acoustics, structures, materials, and active controls is developed. The potential market and range requirements as well as economic factors including payload, speed, airline operating costs, and airline profitability are analyzed. The conceptual design of the baseline aircraft to be used in assessing the technology requirements is described.

The Large UV/Optical/Infrared Surveyor (LUVOIR): Decadal Mission concept technology development overview

NASA Astrophysics Data System (ADS)

Bolcar, Matthew R.

2017-09-01

The Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor is one of four large mission concept studies being developed by NASA for consideration in the 2020 Astrophysics Decadal Survey. LUVOIR will support a broad range of science objectives, including the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the epoch of reionization, star and planet formation, and the remote sensing of Solar System bodies. The LUVOIR Science and Technology Definition Team (STDT) has tasked a Technology Working Group (TWG), with more than 60 members from NASA centers, academia, industry, and international partners, with identifying technologies that enable or enhance the LUVOIR science mission. The TWG has identified such technologies in the areas of Coronagraphy, Ultra-Stable Opto-mechanical Systems, Detectors, Coatings, Starshades, and Instrument Components, and has completed a detailed assessment of the state-of-the-art. We present here a summary of this technology assessment effort, as well as the current progress in defining a technology development plan to mature these technologies to the required technology readiness level (TRL).

The Large UV/Optical/Infrared Surveyor (LUVOIR): Decadal Mission Concept Technology Development Overview

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.

2017-01-01

The Large Ultraviolet / Optical / Infrared (LUVOIR) Surveyor is one of four large mission concept studies being developed by NASA for consideration in the 2020 Astrophysics Decadal Survey. LUVOIR will support a broad range of science objectives, including the direct imaging and spectral characterization of habitable exoplanets around sun-like stars, the study of galaxy formation and evolution, the epoch of reionization, star and planet formation, and the remote sensing of Solar System bodies. The LUVOIR Science and Technology Definition Team (STDT) has tasked a Technology Working Group (TWG), with more than 60 members from NASA centers, academia, industry, and international partners, with identifying technologies that enable or enhance the LUVOIR science mission. The TWG has identified such technologies in the areas of Coronagraphy, Ultra-Stable Opto-mechanical Systems, Detectors, Coatings, Starshades, and Instrument Components, and has completed a detailed assessment of the state-of-the-art. We present here a summary of this technology assessment effort, as well as the current progress in defining a technology development plan to mature these technologies to the required technology readiness level (TRL).

An overview of water disinfection in developing countries and the potential for solar thermal water pasteurization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burch, J.; Thomas, K.E.

This study originated within the Solar Buildings Program at the U.S. Department of Energy. Its goal is to assess the potential for solar thermal water disinfection in developing countries. In order to assess solar thermal potential, the alternatives must be clearly understood and compared. The objectives of the study are to: (a) characterize the developing world disinfection needs and market; (b) identify competing technologies, both traditional and emerging; (c) analyze and characterize solar thermal pasteurization; (d) compare technologies on cost-effectiveness and appropriateness; and (e) identify research opportunities. Natural consequences of the study beyond these objectives include a broad knowledge ofmore » water disinfection problems and technologies, introduction of solar thermal pasteurization technologies to a broad audience, and general identification of disinfection opportunities for renewable technologies.« less

Qualitative assessment of patients’ attitudes and expectations toward BCIs and implications for future technology development

PubMed Central

Schicktanz, Silke; Amelung, Till; Rieger, Jochem W.

2015-01-01

Brain–computer–interfaces (BCIs) are important for the next generation of neuro-prosthesis innovations. Only few pilot projects have tested patients’ abilities to control BCIs as well as their satisfaction with the offered technologies. On the one hand, little is known about patients’ moral attitudes toward the benefit-risk-ratio of BCIs as well as their needs, priorities, and expectations. On the other hand, ethics experts intensively discuss the general risks of BCIs as well as the limits of neuro-enhancement. To our knowledge, we present here the first qualitative interview study with ten chronic patients matching the potential user categories for motor and communication BCIs to assess their practical and moral attitudes toward this technology. The interviews reveal practical and moral attitudes toward motor BCIs that can impact future technology development. We discuss our empirical findings on patients’ perspectives and compare them to neuroscientists’ and ethicists’ perspectives. Our analysis indicates only partial overlap between the potential users’ and the experts’ assessments of BCI-technology. It points out the importance of considering the needs and desires of the targeted patient group. Based on our findings, we suggest a multi-fold approach to the development of clinical BCIs, rooted in the participatory technology-development. We conclude that clinical BCI development needs to be explored in a disease-related and culturally sensitive way. PMID:25964745

An impoverished machine: challenges to human learning and instructional technology.

PubMed

Taraban, Roman

2008-08-01

Many of the limitations to human learning and processing identified by cognitive psychologists over the last 50 years still hold true, including computational constraints, low learning rates, and unreliable processing. Instructional technology can be used in classrooms and in other learning contexts to address these limitations to learning. However, creating technological innovations is not enough. As part of psychological science, the development and assessment of instructional systems should be guided by theories and practices within the discipline. The technology we develop should become an object of research like other phenomena that are studied. In the present article, I present an informal account of my own work in assessing instructional technology for engineering thermodynamics to show not only the benefits, but also the limitations, in studying the technology we create. I conclude by considering several ways of advancing the development of instructional technology within the SCiP community, including interdisciplinary research and envisioning learning contexts that differ radically from traditional learning focused on lectures and testing.

Technological Pedagogical Content Knowledge (TPACK): The Development and Validation of an Assessment Instrument for Preservice Teachers

ERIC Educational Resources Information Center

Schmidt, Denise A.; Baran, Evrim; Thompson, Ann D.; Mishra, Punya; Koehler, Matthew J.; Shin, Tae S.

2009-01-01

Based in Shulman's idea of Pedagogical Content Knowledge, Technological Pedagogical Content Knowledge (TPACK) has emerged as a useful frame for describing and understanding the goals for technology use in preservice teacher education. This paper addresses the need for a survey instrument designed to assess TPACK for preservice teachers. The paper…

Thinking beyond Technology: Using the iSkills Assessment as Evidence to Support Institutional ICT Literacy Initiatives

ERIC Educational Resources Information Center

Egan, Teresa; Katz, Irvin R.

2007-01-01

When Educational Testing Service (ETS) was first approached by college librarians, professors, and administrators to develop an assessment of Information and Communication Technology (ICT) literacy, there was a resounding concern: incoming students could use technology for entertainment purposes, but many did not have the ICT literacy skills to do…

Assessing Pre-Service Science Teachers' Technological Pedagogical Content Knowledge (TPACK) through Observations and Lesson Plans

ERIC Educational Resources Information Center

Canbazoglu Bilici, Sedef; Guzey, S. Selcen; Yamak, Havva

2016-01-01

Background: Technological pedagogical content knowledge (TPACK) is critical for effective teaching with technology. However, generally science teacher education programs do not help pre-service teachers develop TPACK. Purpose: The purpose of this study was to assess pre-service science teachers' TPACK over a semester-long Science Methods. Sample:…

Technology assessment of future intercity passenger transporation systems. Volume 1: Summary report

NASA Technical Reports Server (NTRS)

1976-01-01

Technical, economic, environmental, and sociopolitical issues associated with future intercity transportation system options were assured. Technology assessment was used as a tool to assist in the identification of basic research and technology development tasks that should be undertaken. The emphasis was on domestic passenger transportation, but interfaces with freight and international transportation were considered.

Computer-Based Resource Accounting Model for Automobile Technology Impact Assessment

DOT National Transportation Integrated Search

1976-10-01

A computer-implemented resource accounting model has been developed for assessing resource impacts of future automobile technology options. The resources tracked are materials, energy, capital, and labor. The model has been used in support of the Int...

Joint Peru/United States report on Peru/United States cooperative energy assessment. Volume 4 of 4 Volumes Annexes 8-11

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-08-01

A comprehensive assessment of the biofuel potential of Peru is presented. Topics discussed cover current biofuel utilization practices; evaluation of Peruvian biomass productivity; identification of Peruvian agricultural and forestry resources; assessment of resource development and management concerns; identification of market considerations; description of biofuel technological options; and regional identification of biofuel technology applications. The discussion of current biofuel utilization centers on a qualitative description of the main conversion approaches now being practiced in Peru. Biomass productivity is evaluated in the context of the terrain, soil, and climatic conditions found in Peru. A quantitative description of the energy potential that couldmore » be realized from agricultural and forestry resources of Peru follows. A regional picture is given for the production of agricultural residues and forest resources that could potentially supply energy. The assessment of resource development and management concerns focuses on harvesting, reforestation, training, and the environmental consequences of utilization of forest resources. Market factors assessed include: importation, internal market development, external market development, energy policy and pricing, and transportation. Ten biofuel technology options for Peru were identified: small- to medium-scale gasification, a wood waste inventory, stationary and mobile charcoal production systems, wood distillation, forest resource development and management, electrical cogeneration, anaerobic digestion technology, development of ethanol production capabilities, and agricultural strategies for fuel production.Based upon these biofuel options, nine applications were identified for the Costa Region, eight for the Sierra Region, and ten for the Selva Region.« less

Assessment of Peruvian biofuel resources and alternatives

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harper, J.P.; Smith, W.; Mariani, E.

1979-08-01

Comprehensive assessment of the biofuel potential of Peru is based on: determination of current biofuel utilization practices, evauation of Peruvian biomass productivity, identification of Peruvian agricultural and forestry resources, assessment of resource development and management concerns, identification of market considerations, description of biofuel technological options, and identification of regional biofuel technology applications. Discussion of current biofuel utilization centers on a qualitative description of the main conversion approaches currently being practiced in Peru. Biomass productivity evaluations consider the terrain and soil, and climatic conditions found in Peru. The potential energy from Peruvian agricultural and forestry resources is described quantitatively. Potental regionalmore » production of agricultural residues and forest resources that could supply energy are identified. Assessment of resource development and management concerns focuses on harvesting, reforestation, training, and environmental consequences of utilization of forest resources. Market factors assessed include: importation, internal market development, external market development, energy policy and pricing, and transportation. Nine biofuel technology options for Peru are identified: (1) small-to-medium-scale gasification, (2) a wood waste inventory, (3) stationary and mobile charcoal production systems, (4) wood distillation, (5) forest resource development and management, (6) electrical cogeneration, (7) anaerobic digestion technology, (8) development of ethanol production capabilities, and (9) agricultural strategies for fuel production. Applications of these biofuel options are identified for each of the three major regions - nine applications for the Costa Region, eight for the Sierra Region, and ten for the Selva Region.« less

Project Assessment Framework through Design (PAFTD) - A Project Assessment Framework in Support of Strategic Decision Making

NASA Technical Reports Server (NTRS)

Depenbrock, Brett T.; Balint, Tibor S.; Sheehy, Jeffrey A.

2014-01-01

Research and development organizations that push the innovation edge of technology frequently encounter challenges when attempting to identify an investment strategy and to accurately forecast the cost and schedule performance of selected projects. Fast moving and complex environments require managers to quickly analyze and diagnose the value of returns on investment versus allocated resources. Our Project Assessment Framework through Design (PAFTD) tool facilitates decision making for NASA senior leadership to enable more strategic and consistent technology development investment analysis, beginning at implementation and continuing through the project life cycle. The framework takes an integrated approach by leveraging design principles of useability, feasibility, and viability and aligns them with methods employed by NASA's Independent Program Assessment Office for project performance assessment. The need exists to periodically revisit the justification and prioritization of technology development investments as changes occur over project life cycles. The framework informs management rapidly and comprehensively about diagnosed internal and external root causes of project performance.

An Assessment of Integrated Flywheel System Technology

NASA Technical Reports Server (NTRS)

Keckler, C. R. (Editor); Bechtel, R. T. (Editor); Groom, N. J. (Editor)

1984-01-01

The current state of the technology in flywheel storage systems and ancillary components, the technology in light of future requirements, and technology development needs to rectify these shortfalls were identified. Technology efforts conducted in Europe and in the United States were reviewed. Results of developments in composite material rotors, magnetic suspension systems, motor/generators and electronics, and system dynamics and control were presented. The technology issues for the various disciplines and technology enhancement scenarios are discussed. A summary of the workshop, and conclusions and recommendations are presented.

Technology for small spacecraft

NASA Technical Reports Server (NTRS)

1994-01-01

This report gives the results of a study by the National Research Council's Panel on Small Spacecraft Technology that reviewed NASA's technology development program for small spacecraft and assessed technology within the U.S. government and industry that is applicable to small spacecraft. The panel found that there is a considerable body of advanced technology currently available for application by NASA and the small spacecraft industry that could provide substantial improvement in capability and cost over those technologies used for current NASA small spacecraft. These technologies are the result of developments by commercial companies, Department of Defense agencies, and to a lesser degree NASA. The panel also found that additional technologies are being developed by these same entities that could provide additional substantial improvement if development is successfully completed. Recommendations for future technology development efforts by NASA across a broad technological spectrum are made.

Applying Technology to Enhance STEM Achievement for Students with Disabilities: The Blending Assessment with Instruction Program

ERIC Educational Resources Information Center

Meyen, Edward L.; Greer, Diana L.

2010-01-01

This article discusses the theoretical framework, instructional design, formative assessment results, capacity for national distribution, and generalization of the Blending Assessment with Instruction Program (BAIP) model to other content areas such as science. The BAIP, developed and validated at the University of Kansas, employs technology to…

Best Implementation Practices: Disseminating New Assessment Technologies in a Juvenile Justice Agency

ERIC Educational Resources Information Center

Young, Douglas; Moline, Karl; Farrell, Jill; Bierie, David

2006-01-01

Much has been written in recent years about advances in assessment technologies designed to aid decision making in the juvenile justice system. Adoption and implementation of this latest generation of actuarial tools, however, have lagged behind their development. Assessment in juvenile justice exemplifies the "science-practice gap" that…

Technologies for Interactive Learning and Assessment Content Development

ERIC Educational Resources Information Center

Gusev, Marjan; Ristov, Sasko; Armenski, Goce

2016-01-01

Recent technology trends evolved the student assessment from traditional ones ("pen-and-paper" and "face-to-face") to modern e-Assessment system. These modern approaches allow the teachers to conduct and evaluate an exam with huge number of students in a short period of time. Even more important, both the teacher and the…

Nuclear thermal propulsion workshop overview

NASA Technical Reports Server (NTRS)

Clark, John S.

1991-01-01

NASA is planning an Exploration Technology Program as part of the Space Exploration Initiative to return U.S. astronauts to the moon, conduct intensive robotic exploration of the moon and Mars, and to conduct a piloted mission to Mars by 2019. Nuclear Propulsion is one of the key technology thrust for the human mission to Mars. The workshop addresses NTP (Nuclear Thermal Rocket) technologies with purpose to: assess the state-of-the-art of nuclear propulsion concepts; assess the potential benefits of the concepts for the mission to Mars; identify critical, enabling technologies; lay-out (first order) technology development plans including facility requirements; and estimate the cost of developing these technologies to flight-ready status. The output from the workshop will serve as a data base for nuclear propulsion project planning.

Maturing Technologies for Stirling Space Power Generation

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Nowlin, Brentley C.; Dobbs, Michael W.; Schmitz, Paul C.; Huth, James

2016-01-01

Stirling Radioisotope Power Systems (RPS) are being developed as an option to provide power on future space science missions where robotic spacecraft will orbit, flyby, land or rove. A Stirling Radioisotope Generator (SRG) could offer space missions a more efficient power system that uses one fourth of the nuclear fuel and decreases the thermal footprint of the current state of the art. The RPS Program Office, working in collaboration with the U.S. Department of Energy (DOE), manages projects to develop thermoelectric and dynamic power systems, including Stirling Radioisotope Generators (SRGs). The Stirling Cycle Technology Development (SCTD) Project, located at Glenn Research Center (GRC), is developing Stirling-based subsystems, including convertors and controllers. The SCTD Project also performs research that focuses on a wide variety of objectives, including increasing convertor temperature capability to enable new environments, improving system reliability or fault tolerance, reducing mass or size, and developing advanced concepts that are mission enabling. Research activity includes maturing subsystems, assemblies, and components to prepare them for infusion into future convertor and generator designs. The status of several technology development efforts are described here. As part of the maturation process, technologies are assessed for readiness in higher-level subsystems. To assess the readiness level of the Dual Convertor Controller (DCC), a Technology Readiness Assessment (TRA) was performed and the process and results are shown. Stirling technology research is being performed by the SCTD Project for NASA's RPS Program Office, where tasks focus on maturation of Stirling-based systems and subsystems for future space science missions.

Model and Analytic Processes for Export License Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thompson, Sandra E.; Whitney, Paul D.; Weimar, Mark R.

2011-09-29

This paper represents the Department of Energy Office of Nonproliferation Research and Development (NA-22) Simulations, Algorithms and Modeling (SAM) Program's first effort to identify and frame analytical methods and tools to aid export control professionals in effectively predicting proliferation intent; a complex, multi-step and multi-agency process. The report focuses on analytical modeling methodologies that alone, or combined, may improve the proliferation export control license approval process. It is a follow-up to an earlier paper describing information sources and environments related to international nuclear technology transfer. This report describes the decision criteria used to evaluate modeling techniques and tools to determinemore » which approaches will be investigated during the final 2 years of the project. The report also details the motivation for why new modeling techniques and tools are needed. The analytical modeling methodologies will enable analysts to evaluate the information environment for relevance to detecting proliferation intent, with specific focus on assessing risks associated with transferring dual-use technologies. Dual-use technologies can be used in both weapons and commercial enterprises. A decision-framework was developed to evaluate which of the different analytical modeling methodologies would be most appropriate conditional on the uniqueness of the approach, data availability, laboratory capabilities, relevance to NA-22 and Office of Arms Control and Nonproliferation (NA-24) research needs and the impact if successful. Modeling methodologies were divided into whether they could help micro-level assessments (e.g., help improve individual license assessments) or macro-level assessment. Macro-level assessment focuses on suppliers, technology, consumers, economies, and proliferation context. Macro-level assessment technologies scored higher in the area of uniqueness because less work has been done at the macro level. An approach to developing testable hypotheses for the macro-level assessment methodologies is provided. The outcome of this works suggests that we should develop a Bayes Net for micro-level analysis and continue to focus on Bayes Net, System Dynamics and Economic Input/Output models for assessing macro-level problems. Simultaneously, we need to develop metrics for assessing intent in export control, including the risks and consequences associated with all aspects of export control.« less

Technology needs for high-speed rotorcraft

NASA Technical Reports Server (NTRS)

Rutherford, John; Orourke, Matthew; Martin, Christopher; Lovenguth, Marc; Mitchell, Clark

1991-01-01

A study to determine the technology development required for high-speed rotorcraft development was conducted. The study begins with an initial assessment of six concepts capable of flight at, or greater than 450 knots with helicopter-like hover efficiency (disk loading less than 50 pfs). These concepts were sized and evaluated based on measures of effectiveness and operational considerations. Additionally, an initial assessment of the impact of technology advances on the vehicles attributes was made. From these initial concepts a tilt wing and rotor/wing concepts were selected for further evaluation. A more detailed examination of conversion and technology trade studies were conducted on these two vehicles, each sized for a different mission.

Introduction to the report of the Asilomar 3 LDR workshop

NASA Technical Reports Server (NTRS)

1988-01-01

The Large Deployable Reflector (LDR) is a system concept for a dedicated, orbiting, submillimeter, far infrared, astronomical observatory. The purpose of the 3rd conference was to review the latest system concepts for LDR, update the science requirements, and assess the status of the technology development that was recommended at Asilomar 2. The technology development assessment included ongoing work within NASA, the DOD, and various universities. Problem areas and technologies not being adequately addressed were to be identified and prioritized. In particular, the CSTI program in Sensors and Precision Segmented Reflectors was reviewed for appropriateness and progress relative to LDR technology needs.

FCS Technology Investigation Overview

NASA Technical Reports Server (NTRS)

Budinger, James; Gilbert, Tricia

2007-01-01

This working paper provides an overview of the Future Communication Study (FCS) technology investigation progress. It includes a description of the methodology applied to technology evaluation; evaluation criteria; and technology screening (down select) results. A comparison of screening results with other similar technology screening activities is provided. Additional information included in this working paper is a description of in-depth studies (including characterization of the L-band aeronautical channel; L-band deployment cost assessment; and performance assessments of candidate technologies in the applicable aeronautical channel) that have been conducted to support technology evaluations. The paper concludes with a description on-going activities leading to conclusion of the technology investigation and the development of technology recommendations.

Engaging with Faculty to Develop, Implement, and Pilot Electronic Performance Assessments of Student Teachers Using Mobile Devices

ERIC Educational Resources Information Center

Haughton, Noela A.; Keil, Virginia L.

2009-01-01

This article discusses the development and implementation of a technology-supported student teacher performance assessment that supports integration with a larger electronic assessment system. The authors spearheaded a multidisciplinary team to develop a comprehensive performance assessment based on the Pathwise framework. The team collaborated…

Developing an instrument for assessing students' concepts of the nature of technology

NASA Astrophysics Data System (ADS)

Liou, Pey-Yan

2015-05-01

Background:The nature of technology has been rarely discussed despite the fact that technology plays an essential role in modern society. It is important to discuss students' concepts of the nature of technology, and further to advance their technological literacy and adaptation to modern society. There is a need to assess high school students' concepts of the nature of technology. Purpose:This study aims to engage in discourse on students' concepts of the nature of technology based on a proposed theoretical framework. Moreover, another goal is to develop an instrument for measuring students' concepts of the nature of technology. Sample:Four hundred and fifty-five high school students' perceptions of technology were qualitatively analyzed. Furthermore, 530 students' responses to a newly developed questionnaire were quantitatively analyzed in the final test. Design and method:First, content analysis was utilized to discuss and categorize students' statements regarding technology and its related issues. The Student Concepts of the Nature of Technology Questionnaire was developed based on the proposed theoretical framework and was supported by the students' qualitative data. Finally, exploratory factor analysis and reliability analysis were applied to determine the structure of the items and the internal consistency of each scale. Results:Through a process of instrument development, the Student Concepts of the Nature of Technology Questionnaire was shown to be a valid and reliable tool for measuring students' concepts of the nature of technology. This newly developed questionnaire is composed of 29 items in six scales, namely 'technology as artifacts,' 'technology as an innovation change,' 'the current role of technology in society,' 'technology as a double-edged sword,' 'technology as a science-based form,' and 'history of technology.' Conclusions:The Student Concepts of the Nature of Technology Questionnaire has been confirmed as a reasonably valid and reliable instrument. This study provides a useful questionnaire for educational researchers and practitioners for measuring students' concepts of the nature of technology.

Technology-Supported Performance Assessments for Middle School Geoscience

NASA Astrophysics Data System (ADS)

Zalles, D. R.; Quellmalz, E.; Rosenquist, A.; Kreikemeier, P.

2002-12-01

Under funding from the World Bank, the U.S. Department of Education, the National Science Foundation, and the Federal Government's Global Learning and Observations to Benefit the Environment Program (GLOBE), SRI International has developed and piloted web-accessible performance assessments that measure K-12 students' abilities to use learning technologies to reason with scientific information and communicate evidence-based conclusions to scientific problems. This presentation will describe the assessments that pertain to geoscience at the middle school level. They are the GLOBE Assessments and EPA Phoenix, an instantiation of SRI's model of assessment design known as Integrative Performance Assessments in Technology (IPAT). All are publicly-available on the web. GLOBE engages students in scientific data collection and observation about the environment. SRI's classroom assessments for GLOBE provide sample student assessment tools and frameworks that allow teachers and students to assess how well students can use the data in scientific inquiry projects. Teachers can use classroom assessment tools on the site to develop integrated investigations for assessing GLOBE within their particular science curricula. Rubrics are provided for measuring students' GLOBE-related skills, and alignments are made to state, national, and international science standards. Sample investigations are provided about atmosphere, hydrology, landcover, soils, earth systems, and visualizations. The IPAT assessments present students with engaging problems rooted in science or social science content, plus sets of tasks and questions that require them to gather relevant information on the web, use reasoning strategies to analyze and interpret the information, use spreadsheets, word processors, and other productivity tools, and communicate evidence-based findings and recommendations. In the process of gathering information and drawing conclusions, students are assessed on how well they can operate the technology as well as reason with the information made available through its use. In EPA Phoenix, students are asked to examine different representations of air quality data on the EPA website, as well as national weather data, in order to judge whether Phoenix would be a good site for holding certain athletic events. The students are assessed on how well they can interpret the data, synthesize it, and develop and communicate their conclusions. With the exception of formulating Web searches, results from piloting indicated that students were better at operating technology and interpreting single data sources than they were with synthesizing data from multiple sources and communicating cohesive evidence-based conclusions. Under the aegis of NSF and the International Association for the Evaluation of Educational Achievement, SRI is developing more IPAT assessments in science for a comparative international research study about student achievement in information and communication technology. These assessments will add other technologies into the mix such as dynamic modeling tools and geographic information systems.

Engineering Research and Technology Development on the Space Station

NASA Technical Reports Server (NTRS)

1996-01-01

This report identifies and assesses the kinds of engineering research and technology development applicable to national, NASA, and commercial needs that can appropriately be performed on the space station. It also identifies the types of instrumentation that should be included in the space station design to support engineering research. The report contains a preliminary assessment of the potential benefits to U.S. competitiveness of engineering research that might be conducted on a space station, reviews NASA's current approach to jointly funded or cooperative experiments, and suggests modifications that might facilitate university and industry participation in engineering research and technology development activities on the space station.

Assessment of the State-of-the-Art in the Design and Manufacturing of Large Composite Structure

NASA Technical Reports Server (NTRS)

Harris, C. E.

2001-01-01

This viewgraph presentation gives an assessment of the state-of-the-art in the design and manufacturing of large component structures, including details on the use of continuous fiber reinforced polymer matrix composites (CFRP) in commercial and military aircraft and in space launch vehicles. Project risk mitigation plans must include a building-block test approach to structural design development, manufacturing process scale-up development tests, and pre-flight ground tests to verify structural integrity. The potential benefits of composite structures justifies NASA's investment in developing the technology. Advanced composite structures technology is enabling to virtually every Aero-Space Technology Enterprise Goal.

The Impact of In-Service Technology Training Programmes on Technology Teachers

ERIC Educational Resources Information Center

Gumbo, Mishack; Makgato, Moses; Muller, Helene

2012-01-01

The aim of this paper is to assess the impact the Advanced Certificate in Education (ACE) in-service technology training program has on technology teachers' knowledge and understanding of technology. The training of technology teachers is an initiative toward teachers' professional development within the mathematics, science, and technology sphere…

The Complete Picture: "Standards for Technological Literacy" and "Advancing Excellence in Technological Literacy."

ERIC Educational Resources Information Center

Technology Teacher, 2003

2003-01-01

Provides an overview of the "Standards for Technological Literacy: Content for the Study of Technology" (STL) and "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards" (AETL). Shows how the documents work together to advance the technological literacy of technology educators and K-12…

Assessing pre-service science teachers' technological pedagogical content knowledge (TPACK) through observations and lesson plans

NASA Astrophysics Data System (ADS)

Canbazoglu Bilici, Sedef; Selcen Guzey, S.; Yamak, Havva

2016-05-01

Background: Technological pedagogical content knowledge (TPACK) is critical for effective teaching with technology. However, generally science teacher education programs do not help pre-service teachers develop TPACK. Purpose: The purpose of this study was to assess pre-service science teachers' TPACK over a semester-long Science Methods. Sample: Twenty-seven pre-service science teachers took the course toward the end of their four-year teacher education program. Design and method: The study employed the case study methodology. Lesson plans and microteaching observations were used as data collection tools. Technological Pedagogical Content Knowledge-based lesson plan assessment instrument (TPACK-LpAI) and Technological Pedagogical Content Knowledge Observation Protocol (TPACK-OP) were used to analyze data obtained from observations and lesson plans. Results: The results showed that the TPACK-focused Science Methods course had an impact on pre-service teachers' TPACK to varying degrees. Most importantly, the course helped teachers gain knowledge of effective usage of educational technology tools. Conclusion: Teacher education programs should provide opportunities to pre-service teachers to develop their TPACK so that they can effectively integrate technology into their teaching.

Space science/space station attached payload pointing accommodation study: Technology assessment white paper

NASA Technical Reports Server (NTRS)

Lin, Richard Y.; Mann, Kenneth E.; Laskin, Robert A.; Sirlin, Samuel W.

1987-01-01

Technology assessment is performed for pointing systems that accommodate payloads of large mass and large dimensions. Related technology areas are also examined. These related areas include active thermal lines or power cables across gimbals, new materials for increased passive damping, tethered pointing, and inertially reacting pointing systems. Conclusions, issues and concerns, and recommendations regarding the status and development of large pointing systems for space applications are made based on the performed assessments.

Market Assessment and Commercialization Strategy for the Radial Sandia Cooler

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Shandross, Richard; Weintraub, Daniel

This market assessment and commercialization report characterizes and assesses the market potential of the rotating heat exchanger technology developed at Sandia National Laboratories (SNL), known as the Radial Sandia Cooler. The RSC is a novel, motor-driven, rotating, finned heat exchanger technology. The RSC was evaluated for the residential, commercial, industrial, and transportation markets. Recommendations for commercialization were made based on assessments of the prototype RSC and the Sandia Cooler technology in general, as well as an in-depth analysis of the six most promising products for initial RSC commercialization.

Can smartphones enhance telephone-based cognitive assessment (TBCA)?

PubMed

Kwan, Rick Yiu-Cho; Lai, Claudia Kam-Yuk

2013-12-12

TBCA has emerged to solve the limitations of administering cognitive assessments face-to-face. The recent development of telephones and knowledge advances in the area of cognitive impairment may affect the development of TBCA. The purpose of this paper is to discuss how smartphones can be used to enhance the applicability of TBCA, which has previously been administered by conventional telephone. This paper will first review, describe and critique the existing TBCA instruments. It will then discuss the recent developments in tele-technology, the popularity of tele-technology among the elderly, potential benefits and challenges in using smartphones for cognitive assessment, and possible future developments in this technology. In the systematic review, eighteen TBCA instruments were identified. They were found to be valid in differentiating between people with and without dementia. TBCA was previously found to be launched on a conventional telephone platform. The advances in understanding of cognitive impairment may demand that telephones be equipped with more advanced features. Recently, the development and penetration of smartphones among the elderly has been rapid. This may allow the smartphone to enhance its TBCA applicability by overcoming the limitations of the conventional telephone, rendering the TBCA more efficient in addressing the increasing demand and complexity of cognitive assessments in the future. However, more research and technology developments are needed before smartphones can become a valid platform for TBCA.

Capacity building for assessing new technologies: approaches to examining personalized medicine in practice

PubMed Central

Van Bebber, Stephanie L; Trosman, Julia R; Liang, Su-Ying; Wang, Grace; Marshall, Deborah A; Knight, Sara; Phillips, Kathryn A

2011-01-01

This article focuses on the overarching question: how can we use existing data to develop the capacity to improve the evidence base on personalized medicine technologies and particularly regarding their utilization and clinical utility? We focus on data from health payers who are key stakeholders in capacity building, as they need data to guide decisions and they develop data as part of operations. Broadly defined, health payers include insurance carriers, third party payers, health-plan sponsors and organized delivery systems. Data from health payers have not yet been widely used to assess personalized medicine. Now, with an increasing number of personalized technologies covered and reimbursed by health payers, and an increasing number of emerging technologies that will require policy decisions, there is a great opportunity to develop the evidence base using payer data and by engaging with these stakeholders. Here, we describe data that are available from, and are being developed by, health payers and assess how these data can be further developed to increase the capacity for future research, using three examples. The examples suggest that payer data can be used to examine clinical utility and approaches can be developed that simultaneously address the characteristics of personalized medicine, real world data and organizations. These examples can now help us to elucidate how to best examine clinical utility in actual practice and build evaluation approaches that can be applied to future technologies. PMID:21857867

Technologies Assessing Limb Bradykinesia in Parkinson's Disease.

PubMed

Hasan, Hasan; Athauda, Dilan S; Foltynie, Thomas; Noyce, Alastair J

2017-01-01

The MDS-UPDRS (Movement Disorders Society - Unified Parkinson's Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development.

The assessment of professional competence: building blocks for theory development.

PubMed

van der Vleuten, C P M; Schuwirth, L W T; Scheele, F; Driessen, E W; Hodges, B

2010-12-01

This article presents lessons learnt from experiences with assessment of professional competence. Based on Miller's pyramid, a distinction is made between established assessment technology for assessing 'knows', 'knowing how' and 'showing how' and more recent developments in the assessment of (clinical) performance at the 'does' level. Some general lessons are derived from research of and experiences with the established assessment technology. Here, many paradoxes are revealed and empirical outcomes are often counterintuitive. Instruments for assessing the 'does' level are classified and described, and additional general lessons for this area of performance assessment are derived. These lessons can also be read as general principles of assessment (programmes) and may provide theoretical building blocks to underpin appropriate and state-of-the-art assessment practices. Copyright © 2010 Elsevier Ltd. All rights reserved.

Reusable Rocket Engine Advanced Health Management System. Architecture and Technology Evaluation: Summary

NASA Technical Reports Server (NTRS)

Pettit, C. D.; Barkhoudarian, S.; Daumann, A. G., Jr.; Provan, G. M.; ElFattah, Y. M.; Glover, D. E.

1999-01-01

In this study, we proposed an Advanced Health Management System (AHMS) functional architecture and conducted a technology assessment for liquid propellant rocket engine lifecycle health management. The purpose of the AHMS is to improve reusable rocket engine safety and to reduce between-flight maintenance. During the study, past and current reusable rocket engine health management-related projects were reviewed, data structures and health management processes of current rocket engine programs were assessed, and in-depth interviews with rocket engine lifecycle and system experts were conducted. A generic AHMS functional architecture, with primary focus on real-time health monitoring, was developed. Fourteen categories of technology tasks and development needs for implementation of the AHMS were identified, based on the functional architecture and our assessment of current rocket engine programs. Five key technology areas were recommended for immediate development, which (1) would provide immediate benefits to current engine programs, and (2) could be implemented with minimal impact on the current Space Shuttle Main Engine (SSME) and Reusable Launch Vehicle (RLV) engine controllers.

Exploration Medical Capability - Technology Watch

NASA Technical Reports Server (NTRS)

Krihak, Michael; Watkins, Sharmila; Barr, Yael; Barsten, Kristina; Fung, Paul; Baumann, David

2011-01-01

The objectives of the Technology Watch process are to identify emerging, high-impact technologies that augment current ExMC development efforts, and to work with academia, industry, and other government agencies to accelerate the development of medical care and research capabilities for the mitigation of potential health issues that could occur during space exploration missions. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion. Such collaborations also further NASA s goal to provide a safe and healthy environment for human exploration. The Tech Watch project addresses requirements and capabilities identified by knowledge and technology gaps that are derived from a discrete set of medical conditions that are most likely to occur on exploration missions. These gaps are addressed through technology readiness level assessments, market surveys, collaborations and distributed innovation opportunities. Ultimately, these gaps need to be closed with respect to exploration missions, and may be achieved through technology development projects. Information management is a key aspect to this process where Tech Watch related meetings, research articles, collaborations and partnerships are tracked by the HRP s Exploration Medical Capabilities (ExMC) Element. In 2011, ExMC will be introducing the Tech Watch external website and evidence wiki that will provide access to ExMC technology and knowledge gaps, technology needs and requirements documents.

EPA ASSESSMENT OF TECHNOLOGIES FOR CONTROLLING EMISSIONS FROM MUNICIPAL WASTE COMBUSTION

EPA Science Inventory

The article examines EPA technical activities relating to the development of regulations pertaining to the control of both new and existing municipal waste combustion facilities (MWCs). The activities include: (1) assessing combustion and flue gas cleaning technologies, (2) colle...

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies, that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. The RTI Team has been successful in the development of NASA/industry partnerships and commercialization of NASA technologies. RTI ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed and implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs. (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology. And (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

How Emerging Technologies are Changing the Rules of Spacecraft Ground Support

NASA Technical Reports Server (NTRS)

Boland, Dillard; Steger, Warren; Weidow, David; Yakstis, Lou

1996-01-01

As part of its effort to develop the flight dynamics distributed system (FDDS), NASA established a program for the continual monitoring of the developments in computer and software technologies, and for assessing the significance of constructing and operating spacecraft ground data systems. In relation to this, technology trends in the computing industry are reviewed, exploring their significance for the spacecraft ground support industry. The technologies considered are: hardware; object computing; Internet; automation, and software development. The ways in which these technologies have affected the industry are considered.

Environmental Technology (Laboratory Analysis and Environmental Sampling) Curriculum Development Project. Final Report.

ERIC Educational Resources Information Center

Hinojosa, Oscar V.; Guillen, Alfonso

A project assessed the need and developed a curriculum for environmental technology (laboratory analysis and environmental sampling) in the emerging high technology centered around environmental safety and health in Texas. Initial data were collected through interviews by telephone and in person and through onsite visits. Additional data was…

Using Communication and Information Technologies To Empower Women in Rural Communities.

ERIC Educational Resources Information Center

Grace, Margaret

Research aimed to enhance rural women's access to communication and information technologies and to assess the impact of their technology use on their participation in small business development and community development. Over 200 women throughout Queensland (Australia) were involved. A trial electronic mailing list linking rural women to urban…

How Technology Shapes Assessment Design: Findings from a Study of University Teachers

ERIC Educational Resources Information Center

Bennett, Sue; Dawson, Phillip; Bearman, Margaret; Molloy, Elizabeth; Boud, David

2017-01-01

A wide range of technologies has been developed to enhance assessment, but adoption has been inconsistent. This is despite assessment being critical to student learning and certification. To understand why this is the case and how it can be addressed, we need to explore the perspectives of academics responsible for designing and implementing…

Assessing Proficiencies in Higher Education: Benchmarking Knowledge and ICT Skills of Students at an Urban Community College

ERIC Educational Resources Information Center

McManus, Teresa L.

2005-01-01

Colleges and universities seeking to assess proficiencies in information and communications technology may wish to learn more about new assessment tools developed by the Educational Testing Service (ETS), in collaboration with higher education partners. This article describes the administration of the Information and Communication Technology (ICT)…

Using Mobile Technologies for Assessment and Learning in Practice Settings: Outcomes of Five Case Studies

ERIC Educational Resources Information Center

Dearnley, Christine; Taylor, Jill; Hennessy, Scott; Parks, Maria; Coates, Catherine; Haigh, Jackie; Fairhall, John; Riley, Kevin; Dransfield, Mark

2009-01-01

This article presents the outcomes of the Mobile Technologies Pilot Project for the Assessment and Learning in Practice Settings (ALPS) Centre for Excellence in Teaching and Learning (CETL). ALPS is a partnership of five Higher Education Institutions (HEI) that aims to develop and improve assessment, and thereby learning, in practice settings for…

The impact of parallel regulatory-health technology assessment scientific advice on clinical development. Assessing the uptake of regulatory and health technology assessment recommendations.

PubMed

Tafuri, Giovanni; Lucas, Inês; Estevão, Steve; Moseley, Jane; d'Andon, Anne; Bruehl, Hannah; Gajraj, Elangovan; Garcia, Sonia; Hedberg, Niklas; Massari, Marco; Molina, Andrea; Obach, Mercè; Osipenko, Leeza; Petavy, Frank; Petschulies, Marco; Pontes, Caridad; Russo, Pierluigi; Schiel, Anja; Van de Casteele, Marc; Zebedin-Brandl, Eva-Maria; Rasi, Guido; Vamvakas, Spiros

2018-05-01

The parallel regulatory-health technology assessment scientific advice (PSA) procedure allows manufacturers to receive simultaneous feedback from both EU regulators and health technology assessment (HTA) bodies on development plans for new medicines. The primary objective of the present study is to investigate whether PSA is integrated in the clinical development programmes for which advice was sought. Contents of PSA provided by regulators and HTA bodies for each procedure between 2010 and 2015 were analysed. The development of all clinical studies for which PSA had been sought was tracked using three different databases. The rate of uptake of the advice provided by regulators and HTA bodies was assessed on two key variables: comparator/s and primary endpoint. In terms of uptake of comparator recommendations at the time of PSA in the actual development, our analysis showed that manufacturers implemented comparators to address both the needs of regulators and of at least one HTA body in 12 of 21 studies. For primary endpoints, in all included studies manufacturers addressed both the needs of the regulators and at least one HTA body. One of the key findings of this analysis is that manufacturers tend to implement changes to the development programme based on both regulatory and HTA advice with regards to the choice of primary endpoint and comparator. It also confirms the challenging choice of the study comparator, for which manufacturers seem to be more inclined to satisfy the regulatory advice. Continuous research efforts in this area are of paramount importance from a public health perspective. © 2018 The British Pharmacological Society.

Container Technology Study : Volume 1. Text.

DOT National Transportation Integrated Search

1980-10-01

This report describes the results of an initial study to assess the technological and operational constraints on the development of a multimodal domestic freight container system. Under this program, the critical technological and operating constrain...

IMPROVING THE EFFECTIVENESS AND EFFICIENCY OF EVIDENCE PRODUCTION FOR HEALTH TECHNOLOGY ASSESSMENT.

PubMed

Facey, Karen; Henshall, Chris; Sampietro-Colom, Laura; Thomas, Sarah

2015-01-01

Health Technology Assessment (HTA) needs to address the challenges posed by high cost, effective technologies, expedited regulatory approaches, and the opportunities provided by collaborative real-world evaluation of technologies. The Health Technology Assessment International (HTAi) Policy Forum met to consider these issues and the implications for evidence production to inform HTA. This paper shares their discussion to stimulate further debate. A background paper, presentations, group discussions, and stakeholder role play at the 2015 HTAi Policy Forum meeting informed this paper. HTA has an important role to play in helping improve evidence production and ensuring that the health service is ready to adopt effective technologies. It needs to move from simply informing health system decisions to also working actively to align stakeholder expectations about realistic evidence requirements. Processes to support dialogue over the health technology life cycle need to be developed that are mindful of limited resources, operate across jurisdictions and learn from past processes. Collaborations between health technology developers and health systems in different countries should be encouraged to develop evidence that will inform decision making. New analytical techniques emerging for real-world data should be harnessed to support modeling for HTA. A paradigm shift (to "Health Innovation System 2.0") is suggested where HTA adopts a more central, proactive role to support alignment within and amongst stakeholders over the whole life cycle of the technology. This could help ensure that evidence production is better aligned with patient and health system needs and so is more effective and efficient.

Satellite voice broadcast. Volume 2: System study

NASA Technical Reports Server (NTRS)

Bachtell, E. E.; Bettadapur, S. S.; Coyner, J. V.; Farrell, C. E.

1985-01-01

The Technical Volume of the Satellite Broadcast System Study is presented. Designs are synthesized for direct sound broadcast satellite systems for HF-, VHF-, L-, and Ku-bands. Methods are developed and used to predict satellite weight, volume, and RF performance for the various concepts considered. Cost and schedule risk assessments are performed to predict time and cost required to implement selected concepts. Technology assessments and tradeoffs are made to identify critical enabling technologies that require development to bring technical risk to acceptable levels for full scale development.

Definition of technology development missions for early space station satellite servicing, volume 2

NASA Technical Reports Server (NTRS)

1983-01-01

The results of all aspects of the early space station satellite servicing study tasks are presented. These results include identification of servicing tasks (and locations), identification of servicing mission system and detailed objectives, functional/operational requirements analyses of multiple servicing scenarios, assessment of critical servicing technology capabilities and development of an evolutionary capability plan, design and validation of selected servicing technology development missions (TDMs), identification of space station satellite servicing accommodation needs, and the cost and schedule implications of acquiring both required technology capability development and conducting the selected TDMs.

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

NASA Technical Reports Server (NTRS)

Young, Roy M.; Montgomery, Edward E.; Montgomery, Sandy; Adams, Charles L.

2007-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office has been sponsoring 2 separate, independent system design and development hardware demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L'Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter ground demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators. Descriptions of the system designs for both the ATK and L'Garde systems will be presented. Changes, additions and evolution of the system designs will be highlighted. A description of the modeling and analyses activities performed by both teams, as well as testing conducted to raise the TRL of solar sail technology will be presented. A summary of the results of model correlation activities will be presented. Finally, technology gaps identified during the assessment and gap closure plans will be presented, along with "lessons learned", subsequent planning activities and validation flight opportunities for solar sail propulsion technology.

Technology assessment and strategy for development of a Rapid Field Water Microbiology Test Kit. Technical report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Preston, D.R.; Schaub, S.A.

1991-09-01

A literature and market search of existing technology for the detection, identification, and quantification of microorganisms in water was conducted. Based upon the availability of technologies and their configurations, an assessment of the appropriate strategies to pursue for the near and long term development plans in development of the Rapid Field Bacteriology Test Kit was performed. Near term technologies to improve the Army's capability to detect microorganisms would appear to be essentially improvements in versatility and measurement of coliform indicator organisms. New chromogenic and fluorogenic indicator substances associated with new substrates appear to be best suited for test kit developmentmore » either for quantitative membrane filter tests or presence/absence and multiple fermentation tests. Test times, incubator requirements, and operator involvement appear to be similar to older technologies. Long term development would appear to favor such technologies as genetic probes with amplification of the hydridized nucleic acid materials of positive samples, and some immunological based systems such as enzyme linked, immuno-sorbent assays. In both cases, the major problems would appear to be sample preparation and development of signal strengths from the reactions which would allow the user to see results in 1 hour.« less

From Earth to orbit. [assessment of transportation options

NASA Technical Reports Server (NTRS)

Gavin, Joseph G., Jr.; Blond, Edmund; Brill, Yvonne C.; Budiansky, Bernard; Cooper, Robert S.; Demisch, Wolfgang H.; Hawk, Clark W.; Kerrebrock, Jack L.; Lichtenberg, Byron K.; Mager, Arthur

1992-01-01

Within this document, the National Research Council (NRC) assesses the requirements, benefits, technological feasibility, and roles of Earth-to-orbit transportation options that could be developed in support of the national space program. Among the topics covered are launch vehicles and infrastructure, propulsion, and technology.

Shadow Mode Assessment Using Realistic Technologies for the National Airspace (SMART NAS)

NASA Technical Reports Server (NTRS)

Kopardekar, Parimal H.

2014-01-01

Develop a simulation and modeling capability that includes: (a) Assessment of multiple parallel universes, (b) Accepts data feeds, (c) Allows for live virtual constructive distribute environment, (d) Enables integrated examinations of concepts, algorithms, technologies and National Airspace System (NAS) architectures.

Advancing the art and science of dietary assessment through technology

USDA-ARS?s Scientific Manuscript database

This research editorial presents the background against which dietitians may consider the benefits of new technology being incorporated into the art and science of dietary assessment. The background provides past changes that have increased the need for computer applications being developed for indi...

Appropriate Technology for Alaskans: An Elective Course for High School Students. Part I.

ERIC Educational Resources Information Center

Helmar, Paul; Woolf, Bob

This course on appropriate technology is designed for use by individual high school students, small groups of students, or for classroom instruction. Course goals include developing a broad understanding of human technologies, examining the history of technology, reviewing and assessing various applications of appropriate technology, and…

Integration of Problem-based Learning and Innovative Technology Into a Self-Care Course

PubMed Central

2013-01-01

Objective. To assess the integration of problem-based learning and technology into a self-care course. Design. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Assessments. Students’ scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Conclusion. Integrating problem-based learning and technology into a self-care course enabled students to become active learners. PMID:23966730

A methodology for spacecraft technology insertion analysis balancing benefit, cost, and risk

NASA Astrophysics Data System (ADS)

Bearden, David Allen

Emerging technologies are changing the way space missions are developed and implemented. Technology development programs are proceeding with the goal of enhancing spacecraft performance and reducing mass and cost. However, it is often the case that technology insertion assessment activities, in the interest of maximizing performance and/or mass reduction, do not consider synergistic system-level effects. Furthermore, even though technical risks are often identified as a large cost and schedule driver, many design processes ignore effects of cost and schedule uncertainty. This research is based on the hypothesis that technology selection is a problem of balancing interrelated (and potentially competing) objectives. Current spacecraft technology selection approaches are summarized, and a Methodology for Evaluating and Ranking Insertion of Technology (MERIT) that expands on these practices to attack otherwise unsolved problems is demonstrated. MERIT combines the modern techniques of technology maturity measures, parametric models, genetic algorithms, and risk assessment (cost and schedule) in a unique manner to resolve very difficult issues including: user-generated uncertainty, relationships between cost/schedule and complexity, and technology "portfolio" management. While the methodology is sufficiently generic that it may in theory be applied to a number of technology insertion problems, this research focuses on application to the specific case of small (<500 kg) satellite design. Small satellite missions are of particular interest because they are often developed under rigid programmatic (cost and schedule) constraints and are motivated to introduce advanced technologies into the design. MERIT is demonstrated for programs procured under varying conditions and constraints such as stringent performance goals, not-to-exceed costs, or hard schedule requirements. MERIT'S contributions to the engineering community are its: unique coupling of the aspects of performance, cost, and schedule; assessment of system level impacts of technology insertion; procedures for estimating uncertainties (risks) associated with advanced technology; and application of heuristics to facilitate informed system-level technology utilization decisions earlier in the conceptual design phase. MERIT extends the state of the art in technology insertion assessment selection practice and, if adopted, may aid designers in determining the configuration of complex systems that meet essential requirements in a timely, cost-effective manner.

DEVELOPING AND IMPLEMENTING AN ESTUARINE WATER QUALITY MONITORING, ASSESSMENT AND OUTREACH PROGRAM/THE MYSOUND PROJECT

EPA Science Inventory

EPA has developed a technology transfer handbook for the EMPACT MYSound Project. The handbook highlights information and monitoring technologies developed from the EMPACT Long Island Sound Marine Monitoring (MYSound) Project. As part of the MYSound effort, telemetering data-buoys...

Health technology assessment of medical devices: What is different? An overview of three European projects.

PubMed

Schnell-Inderst, Petra; Mayer, Julia; Lauterberg, Jörg; Hunger, Theresa; Arvandi, Marjan; Conrads-Frank, Annette; Nachtnebel, Anna; Wild, Claudia; Siebert, Uwe

2015-01-01

With the growing use and importance of health technology assessment (HTA) in decision making during recent years, health technology assessors, decision makers and stakeholders are confronted with methodological challenges due to specific characteristics of health technologies (e. g., pharmaceuticals, diagnostic tests, screening programs), their developmental environment, and their regulation process. Being aware of the necessity to use HTA as a policy instrument for sustainable health care systems in a regulatory environment of decentralized Conformité Européenne (CE) marking, the European Union (EU) is increasingly supporting the development of methods for the assessment of medical devices (MD) on different levels: within the scope of European research projects and within joint assessment activities of the member states of the European network for Health Technology Assessment (EUnetHTA). First, this article describes three projects: MedtecHTA-Methods for Health Technology Assessment of Medical Devices, a European Perspective Work Package 3 (WP3), Comparative Effectiveness of Medical Devices led by the University for Health Sciences, Medical Informatics and Technology (UMIT). Second, we discuss the experiences of the Ludwig Boltzmann Institute Health Technology Assessment (LBI HTA) with the joint production of rapid assessments of medical devices by several European HTA agencies within EUnetHTA. Third, a brief outline is given of the framework of joint methodological guideline elaboration by the EUnetHTA partner organizations because a guideline for therapeutic MD is also being developed here. We will describe aims, methods and some preliminary results of MedtecHTA and EUnetHTA Joint Action 2 Work Package 5 Strand B (WP5B) applying the HTA Core Model for Rapid Assessment for national adaptation and reporting, and give an overview of the development process of methodological guidelines within WP 7 of EUnetHTA Joint Action 2. Based on a literature review in MedtecHTA WP3 incremental development, context dependency and the physical mode of action of MD were identified as those characteristics making therapeutic MD different from drugs with regard to evaluation methods. In addition, regulation does not stipulate clinical trials. These characteristics were also identified as challenges for the production of joint assessments of MD within the HTA network EUnetHTA. Furthermore, adequate timing of assessment production, the variety of involved manufacturers, the non-transparent regulation process of MD in Europe and the often poor evidence base pose a challenge to EUnetHTA assessors. As a consequence, processes and methods for the joint production of rapid assessments must be continuously adapted and improved. Research on HTA methods for the assessment of MD tries to provide tools to deal with rapidly developing devices during evidence generation, dependence of clinical effectiveness of MD on user experience and context factors. There are also tools to integrate evidence from different sources adjusting for different levels of validity, but these methods are not established and need high epidemiological and statistical expertise. A framework for deciding whether additional evidence is needed to reduce uncertainty regarding safety, clinical effectiveness and cost-effectiveness will be adapted to MD. The whole process of evidence generation before and after market access has to be considered to provide an environment for conclusive HTA recommendations informing health care decision making. In Joint Action 2, EUnetHTA develops transparent processes for the early dialogue with stakeholders and fosters dissemination of appropriate HTA methods. In the case of MD, there are special accumulated needs for such efforts. Copyright © 2015. Published by Elsevier GmbH.

Administrator's Guide to Technology: Planning, Funding & Implementation.

ERIC Educational Resources Information Center

Aspen Education Development Group, Gaithersburg, MD.

This document provides guidelines for administrators related to instructional technology and planning. Chapter 1 discusses planning, including developing a technology plan, facility assessment, e-rate planning, formation of a technology committee, budget planning, and hardware/software replacement plan and costs. Chapter 2 addresses…

Adaptive Engine Technologies for Aviation CO2 Emissions Reduction

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Haller, William J.; Tong, Michael T.

2006-01-01

Adaptive turbine engine technologies are assessed for their potential to reduce carbon dioxide emissions from commercial air transports.Technologies including inlet, fan, and compressor flow control, compressor stall control, blade clearance control, combustion control, active bearings and enabling technologies such as active materials and wireless sensors are discussed. The method of systems assessment is described, including strengths and weaknesses of the approach. Performance benefit estimates are presented for each technology, with a summary of potential emissions reduction possible from the development of new, adaptively controlled engine components.

Energy Savings Potential and RD&D Opportunities for Commercial Building HVAC Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Shandross, Richard; Young, Jim

The Building Technologies Office (BTO) commissioned this characterization and technology assessment of heating, ventilation, and air-conditioning (HVAC) systems for commercial buildings. The main objectives of this study: Identify a wide range of technology options in varying stages of development that could reduce commercial HVAC energy consumption; Characterize these technology options based on their technical energy-savings potential, development status, non-energy benefits, and other factors affecting end-user acceptance and the ability to compete with conventional HVAC technologies; Make specific recommendations to DOE and other stakeholders on potential research, development, and demonstration (RD&D) activities that would support further development of the most promisingmore » technology options.« less

Credibility assessments: operational issues and technology impact for law enforcement applications

NASA Astrophysics Data System (ADS)

Ryan, Andrew H., Jr.; Pavlidis, Ioannis; Rohrbaugh, J. W.; Marchak, Frank; Kozel, F. Andrew

2003-09-01

Law Enforcement personnel are faced with new challenges to rapidly assess the credibility of statements made by individuals in airports, border crossings, and a variety of environments not conducive to interviews. New technologies may offer assistance to law enforcement personnel in the interview and interrogation process. Additionally, homeland defense against terrorism challenges scientists to develop new methods of assessing truthfulness and credibility in humans. Current findings of four advanced research projects looking at emerging technologies in the credibility assessment are presented for discussion. This paper will discuss research efforts on four emerging technologies now underway at DoDPI and other institutions. These include: (1) Thermal Image Analysis (TIA); (2) Laser Doppler Vibrometry (LDV); (3) Eye Movement based Memory Assessment (EMMA); and (4) functional Magnetic Resonance Imaging (fMRI). A description each technique, the current state of these research efforts, and an overview of the potential for each of these emerging technologies will be provided.

Welcome to the techno highway: development of a health assessment CD-ROM and website.

PubMed

Bosco, Anna Maria; Ward, Catherine

2005-09-01

Traditionally teaching nursing students psychomotor skills took place in a laboratory setting; however, recent developments in computer technology have revolutionised how educators can transfer knowledge. To meet the need for an efficient and interactive learning experience a software product was required to educate nursing students about health assessment techniques. This paper presents how existing 'old technology' of a video was given new life by embracing new technology, resulting in development of an interactive CD-ROM with supporting WebCT. This innovation reflects a more flexible approach to learning as it is dynamic, portable, self-paced and more convenient for adult learners especially those in remote areas.

Modelling the regional application of stakeholder identified land management strategies.

NASA Astrophysics Data System (ADS)

Irvine, B. J.; Fleskens, L.; Kirkby, M. J.

2012-04-01

The DESIRE project has trialled a series of sustainable land management (SLM) technologies. These technologies have been identified as being beneficial in mitigating land degradation by local stakeholders from a range of semi-arid study sites. The field results and the qualitative WOCAT technology assessment ftom across the study sites have been used to develop the adapted PESERA SLM model. This paper considers the development of the adapted PESERA SLM model and the potential for applying locally successful SLM technologies across a wider range of climatic and environmental conditions with respect to degradation risk, biomass production and the investment cost interface (PESERA/DESMICE). The integrate PESERA/DESMICE model contributes to the policy debate by providing a biophysical and socio-economic assessment of technology and policy scenarios.

An Early Years Toolbox for Assessing Early Executive Function, Language, Self-Regulation, and Social Development: Validity, Reliability, and Preliminary Norms

ERIC Educational Resources Information Center

Howard, Steven J.; Melhuish, Edward

2017-01-01

Several methods of assessing executive function (EF), self-regulation, language development, and social development in young children have been developed over previous decades. Yet new technologies make available methods of assessment not previously considered. In resolving conceptual and pragmatic limitations of existing tools, the Early Years…

EPA SUPPORT OF TECHNOLOGY DEVELOPMENT FOR REHABILITATION

EPA Science Inventory

Several EPA projects are currently underway to encourage technology development and dissemination in key aspects of the condition assessment and rehabilitation and replacement process for water and wastewater systems. The progress on one of these projects, Task Order 58 -- being ...

National Technology Center and photonics

NASA Astrophysics Data System (ADS)

Vlannes, Nickolas P.

1992-05-01

A National Technology Center is proposed in order to meet the international challenges to the economy and security of the United States. This center would be tasked with the acquisition, analysis, assessment, and dissemination of worldwide scientific and technical information and data; technology transfer to the United States; and research and development in information and library sciences and technology. The National Technology Center would form a national network linking centers of excellence and expertise, and maintain a national technology library. With these functions, the National Technology Center has inherent requirements for technologies based on photonics, and will further motivate developments in this field.

Pearson-Praxis Assessments Review Teacher Certification Assessment Technology Education: A Report for the Council on Technology and Engineering Teacher Education

ERIC Educational Resources Information Center

Mahoney, Mark P.

2015-01-01

The Praxis Series, developed by Educational Testing Services (ETS), has been the long standing assessment for teacher licensure. It is comprised of three separate skills examinations: (1) Praxis Core Academic Skills for Educators (Core) (attempts to measure academic skills in reading, writing, and mathematics; content knowledge of candidates…

DEMONSTRATION OF A SCENARIO APPROACH FOR TECHNOLOGY ASSESSMENT: TRANSPORTATION SECTOR

EPA Science Inventory

EPA’s Office of Research and Development (ORD) is pursuing an Air Quality Assessment that will examine the potential consequences of global change on tropospheric ozone and particulate matter (PM) in the year 2050. Technological change is one of the most important drivers for th...

Geothermal Exploration and Resource Assessment | Geothermal Technologies |

Science.gov Websites

, drilling, and resource assessments and the widespread adoption of under-utilized low-temperature resources -temperature geothermal resource technologies. Drilling The drilling of wells to find and develop geothermal low-temperature, sedimentary, co-produced, and enhanced geothermal system resources. We also work to

Proceedings of a Workshop on Navy Long-Range Deep Ocean Technology: An Assessment of Current Development, Forecasts, and Research Thrusts Held at Washington, DC on September 23-24, 1982,

DTIC Science & Technology

1983-01-01

the Navy. These technologies ini- tially were reviewed in five groups; the technologies were assessed later during the workshop in four sets, two of...sulfur dioxide (LiSO2 ). The latter two systems present safety hazards after discharge.1- 7 Also these systems are already being developed exten- sively...Control The K02 life support system will supply oxygen and, at the same time, remove CO2. One chemical performs the two essential functions of the

Advances and trends in computational structural mechanics

NASA Technical Reports Server (NTRS)

Noor, A. K.

1986-01-01

Recent developments in computational structural mechanics are reviewed with reference to computational needs for future structures technology, advances in computational models for material behavior, discrete element technology, assessment and control of numerical simulations of structural response, hybrid analysis, and techniques for large-scale optimization. Research areas in computational structural mechanics which have high potential for meeting future technological needs are identified. These include prediction and analysis of the failure of structural components made of new materials, development of computational strategies and solution methodologies for large-scale structural calculations, and assessment of reliability and adaptive improvement of response predictions.

Automated Rendezvous and Capture in Space: A Technology Assessment

NASA Technical Reports Server (NTRS)

Polites, Michael E.

1998-01-01

This paper presents the results of a study to assess the technology of automated rendezvous and capture (AR&C) in space. The outline of the paper is as follows: First, the history of manual and automated rendezvous and capture and rendezvous and dock is presented. Next, the need for AR&C in space is reviewed. In light of these, AR&C systems are proposed that meet NASA's future needs, but can be developed in a reasonable amount of time with a reasonable amount of money. Technology plans for developing these systems are presented; cost and schedule are included.

Technologies Assessing Limb Bradykinesia in Parkinson’s Disease

PubMed Central

Hasan, Hasan; Athauda, Dilan S.; Foltynie, Thomas; Noyce, Alastair J.

2017-01-01

Background: The MDS-UPDRS (Movement Disorders Society – Unified Parkinson’s Disease Rating Scale) is the most widely used scale for rating impairment in PD. Subscores measuring bradykinesia have low reliability that can be subject to rater variability. Novel technological tools can be used to overcome such issues. Objective: To systematically explore and describe the available technologies for measuring limb bradykinesia in PD that were published between 2006 and 2016. Methods: A systematic literature search using PubMed (MEDLINE), IEEE Xplore, Web of Science, Scopus and Engineering Village (Compendex and Inspec) databases was performed to identify relevant technologies published until 18 October 2016. Results: 47 technologies assessing bradykinesia in PD were identified, 17 of which offered home and clinic-based assessment whilst 30 provided clinic-based assessment only. Of the eligible studies, 7 were validated in a PD patient population only, whilst 40 were tested in both PD and healthy control groups. 19 of the 47 technologies assessed bradykinesia only, whereas 28 assessed other parkinsonian features as well. 33 technologies have been described in additional PD-related studies, whereas 14 are not known to have been tested beyond the pilot phase. Conclusion: Technology based tools offer advantages including objective motor assessment and home monitoring of symptoms, and can be used to assess response to intervention in clinical trials or routine care. This review provides an up-to-date repository and synthesis of the current literature regarding technology used for assessing limb bradykinesia in PD. The review also discusses the current trends with regards to technology and discusses future directions in development. PMID:28222539

Meeting the computer technology needs of community faculty: building new models for faculty development.

PubMed

Baldwin, Constance D; Niebuhr, Virginia N; Sullivan, Brian

2004-01-01

We aimed to identify the evolving computer technology needs and interests of community faculty in order to design an effective faculty development program focused on computer skills: the Teaching and Learning Through Educational Technology (TeLeTET) program. Repeated surveys were conducted between 1994 and 2002 to assess computer resources and needs in a pool of over 800 primary care physician-educators in community practice in East Texas. Based on the results, we developed and evaluated several models to teach community preceptors about computer technologies that are useful for education. Before 1998, only half of our community faculty identified a strong interest in developing their technology skills. As the revolution in telecommunications advanced, however, preceptors' needs and interests changed, and the use of this technology to support community-based teaching became feasible. In 1998 and 1999, resource surveys showed that many of our community teaching sites had computers and Internet access. By 2001, the desire for teletechnology skills development was strong in a nucleus of community faculty, although lack of infrastructure, time, and skills were identified barriers. The TeLeTET project developed several innovative models for technology workshops and conferences, supplemented by online resources, that were well attended and positively evaluated by 181 community faculty over a 3-year period. We have identified the evolving needs of community faculty through iterative needs assessments, developed a flexible faculty development curriculum, and used open-ended, formative evaluation techniques to keep the TeLeTET program responsive to a rapidly changing environment for community-based education in computer technology.

Development of Advanced Life Cycle Costing Methods for Technology Benefit/Cost/Risk Assessment

NASA Technical Reports Server (NTRS)

Yackovetsky, Robert (Technical Monitor)

2002-01-01

The overall objective of this three-year grant is to provide NASA Langley's System Analysis Branch with improved affordability tools and methods based on probabilistic cost assessment techniques. In order to accomplish this objective, the Aerospace Systems Design Laboratory (ASDL) needs to pursue more detailed affordability, technology impact, and risk prediction methods and to demonstrate them on variety of advanced commercial transports. The affordability assessment, which is a cornerstone of ASDL methods, relies on the Aircraft Life Cycle Cost Analysis (ALCCA) program originally developed by NASA Ames Research Center and enhanced by ASDL. This grant proposed to improve ALCCA in support of the project objective by updating the research, design, test, and evaluation cost module, as well as the engine development cost module. Investigations into enhancements to ALCCA include improved engine development cost, process based costing, supportability cost, and system reliability with airline loss of revenue for system downtime. A probabilistic, stand-alone version of ALCCA/FLOPS will also be developed under this grant in order to capture the uncertainty involved in technology assessments. FLOPS (FLight Optimization System program) is an aircraft synthesis and sizing code developed by NASA Langley Research Center. This probabilistic version of the coupled program will be used within a Technology Impact Forecasting (TIF) method to determine what types of technologies would have to be infused in a system in order to meet customer requirements. A probabilistic analysis of the CER's (cost estimating relationships) within ALCCA will also be carried out under this contract in order to gain some insight as to the most influential costs and the impact that code fidelity could have on future RDS (Robust Design Simulation) studies.

China Report, Science and Technology

DTIC Science & Technology

1986-01-27

Technology Assessment Reviewed (Huang Qingming; JISHU JINGJI YU GUANLI YANJIU, No 4, 31 Aug 85) 19 - a - Editorial Explores Technology Importation...JPRS-CST-86-003 27 January 1986 NATIONAL DEVELOPMENTS TECHNOLOGY ASSESSMENT REVIEWED Shanxi JISHU JINGJI YU GUANLI YANJIU [RESEARCH ON THE...derived based on the theory of least squares: where: and x0=l(MN-U 2)Q+(UV-NT)R + (TU-MV)Sl/D y0 = ZOJV-NT)Q + (LN-V 1)R + (TV- LU )Sn/D 20 = L(TU-VM)Q

Teaching Machines, Programming, Computers, and Instructional Technology: The Roots of Performance Technology.

ERIC Educational Resources Information Center

Deutsch, William

1992-01-01

Reviews the history of the development of the field of performance technology. Highlights include early teaching machines, instructional technology, learning theory, programed instruction, the systems approach, needs assessment, branching versus linear program formats, programing languages, and computer-assisted instruction. (LRW)

Early Market TRL/MRL Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa; Stetson, Ned

he focus of this report is TRL/MRL analysis of hydrogen storage; it documents the methodology and results of an effort to identify hydrogen storage technologies’ technical and manufacturing readiness for early market motive and non-motive applications and to provide a path forward toward commercialization. Motive applications include materials handling equipment (MHE) and ground support equipment (GSE), such as forklifts, tow tractors, and specialty vehicles such as golf carts, lawn mowers and wheel chairs. Non-motive applications are portable, stationary or auxiliary power units (APUs) and include portable laptops, backup power, remote sensor power, and auxiliary power for recreational vehicles, hotels, hospitals,more » etc. Hydrogen storage technologies assessed include metal hydrides, chemical hydrides, sorbents, gaseous storage, and liquid storage. The assessments are based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies at varying levels of development. The manufacturing status could be established from eight risk elements: Technical Maturity, Design, Materials, Cost & Funding, Process Capability, Personnel, Facilities and Manufacturing Planning. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale that is easily communicated to interagency partners. This technology readiness assessment (TRA) report documents the process used to conduct the TRA/MRA (technology and manufacturing readiness assessment), reports the TRL and MRL for each assessed technology and provides recommendations based on the findings. To investigate the state of the art and needs to mature the technologies, PNNL prepared a questionnaire to assign TRL and MRL for each hydrogen storage technology. The questionnaire was sent to identified hydrogen storage technology developers and manufacturers who were asked to perform a self-assessment. We included both domestic and international organizations including U.S. national laboratories, U.S. companies, European companies and Japanese companies. PNNL collected the data and performed an analysis to deduce the level of maturity and to provide program recommendations.« less

Technology and Manufacturing Readiness of Early Market Motive and Non-Motive Hydrogen Storage Technologies for Fuel Cell Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ronnebro, Ewa

PNNL’s objective in this report is to provide DOE with a technology and manufacturing readiness assessment to identify hydrogen storage technologies’ maturity levels for early market motive and non-motive applications and to provide a path forward toward commercialization. PNNL’s Technology Readiness Assessment (TRA) is based on a combination of Technology Readiness Level (TRL) and Manufacturing Readiness Level (MRL) designations that enable evaluation of hydrogen storage technologies in varying levels of development. This approach provides a logical methodology and roadmap to enable the identification of hydrogen storage technologies, their advantages/disadvantages, gaps and R&D needs on an unbiased and transparent scale thatmore » is easily communicated to interagency partners. The TRA report documents the process used to conduct the TRA, reports the TRL and MRL for each assessed technology and provides recommendations based on the findings.« less

Health technology assessment, value-based decision making, and innovation.

PubMed

Henshall, Chris; Schuller, Tara

2013-10-01

Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

Blending technology in teaching advanced health assessment in a family nurse practitioner program: using personal digital assistants in a simulation laboratory.

PubMed

Elliott, Lydia; DeCristofaro, Claire; Carpenter, Alesia

2012-09-01

This article describes the development and implementation of integrated use of personal handheld devices (personal digital assistants, PDAs) and high-fidelity simulation in an advanced health assessment course in a graduate family nurse practitioner (NP) program. A teaching tool was developed that can be utilized as a template for clinical case scenarios blending these separate technologies. Review of the evidence-based literature, including peer-reviewed articles and reviews. Blending the technologies of high-fidelity simulation and handheld devices (PDAs) provided a positive learning experience for graduate NP students in a teaching laboratory setting. Combining both technologies in clinical case scenarios offered a more real-world learning experience, with a focus on point-of-care service and integration of interview and physical assessment skills with existing standards of care and external clinical resources. Faculty modeling and advance training with PDA technology was crucial to success. Faculty developed a general template tool and systems-based clinical scenarios integrating PDA and high-fidelity simulation. Faculty observations, the general template tool, and one scenario example are included in this article. ©2012 The Author(s) Journal compilation ©2012 American Academy of Nurse Practitioners.

NASA Technology Applications Team: Commercial applications of aerospace technology

NASA Technical Reports Server (NTRS)

1994-01-01

The Research Triangle Institute (RTI) is pleased to report the results of NASA contract NASW-4367, 'Operation of a Technology Applications Team'. Through a period of significant change within NASA, the RTI Team has maintained its focus on helping NASA establish partnerships with U.S. industry for dual use development and technology commercialization. Our emphasis has been on outcomes, such as licenses, industry partnerships and commercialization of technologies that are important to NASA in its mission of contributing to the improved competitive position of U.S. industry. RTI's ongoing commitment to quality and customer responsiveness has driven our staff to continuously improve our technology transfer methodologies to meet NASA's requirements. For example, RTI has emphasized the following areas: (1) Methodology For Technology Assessment and Marketing: RTI has developed an implemented effective processes for assessing the commercial potential of NASA technologies. These processes resulted from an RTI study of best practices, hands-on experience, and extensive interaction with the NASA Field Centers to adapt to their specific needs; (2) Effective Marketing Strategies: RTI surveyed industry technology managers to determine effective marketing tools and strategies. The Technology Opportunity Announcement format and content were developed as a result of this industry input. For technologies with a dynamic visual impact, RTI has developed a stand-alone demonstration diskette that was successful in developing industry interest in licensing the technology; and (3) Responsiveness to NASA Requirements: RTI listened to our customer (NASA) and designed our processes to conform with the internal procedures and resources at each NASA Field Center and the direction provided by NASA's Agenda for Change. This report covers the activities of the Research Triangle Institute Technology Applications Team for the period 1 October 1993 through 31 December 1994.

Global assessment of technological innovation for climate change adaptation and mitigation in developing world.

PubMed

Adenle, Ademola A; Azadi, Hossein; Arbiol, Joseph

2015-09-15

Concerns about mitigating and adapting to climate change resulted in renewing the incentive for agricultural research investments and developing further innovation priorities around the world particularly in developing countries. In the near future, development of new agricultural measures and proper diffusion of technologies will greatly influence the ability of farmers in adaptation and mitigation to climate change. Using bibliometric approaches through output of academic journal publications and patent-based data, we assess the impact of research and development (R&D) for new and existing technologies within the context of climate change mitigation and adaptation. We show that many developing countries invest limited resources for R&D in relevant technologies that have great potential for mitigation and adaption in agricultural production. We also discuss constraints including weak infrastructure, limited research capacity, lack of credit facilities and technology transfer that may hinder the application of innovation in tackling the challenges of climate change. A range of policy measures is also suggested to overcome identified constraints and to ensure that potentials of innovation for climate change mitigation and adaptation are realized. Copyright © 2015 Elsevier Ltd. All rights reserved.

Literacity: A multimedia adult literacy package combining NASA technology, recursive ID theory, and authentic instruction theory

NASA Technical Reports Server (NTRS)

Willis, Jerry; Willis, Dee Anna; Walsh, Clare; Stephens, Elizabeth; Murphy, Timothy; Price, Jerry; Stevens, William; Jackson, Kevin; Villareal, James A.; Way, Bob

1994-01-01

An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application under development is LiteraCity, a simulation-based instructional package for adults who do not have functional reading skills. Using fuzzy logic routines and other technologies developed by NASA's Information Systems Directorate and hypermedia sound, graphics, and animation technologies the project attempts to overcome the limited impact of adult literacy assessment and instruction by involving the adult in an interactive simulation of real-life literacy activities. The project uses a recursive instructional development model and authentic instruction theory. This paper describes one component of a project to design, develop, and produce a series of computer-based, multimedia instructional packages. The packages are being developed for use in adult literacy programs, particularly in correctional education centers. They use the concepts of authentic instruction and authentic assessment to guide development. All the packages to be developed are instructional simulations. The first is a simulation of 'finding a friend a job.'

NASA's Launch Propulsion Systems Technology Roadmap

NASA Technical Reports Server (NTRS)

McConnaughey, Paul K.; Femminineo, Mark G.; Koelfgen, Syri J.; Lepsch, Roger A; Ryan, Richard M.; Taylor, Steven A.

2012-01-01

Safe, reliable, and affordable access to low-Earth (LEO) orbit is necessary for all of the United States (US) space endeavors. In 2010, NASA s Office of the Chief Technologist commissioned 14 teams to develop technology roadmaps that could be used to guide the Agency s and US technology investment decisions for the next few decades. The Launch Propulsion Systems Technology Area (LPSTA) team was tasked to address the propulsion technology challenges for access to LEO. The developed LPSTA roadmap addresses technologies that enhance existing solid or liquid propulsion technologies and their related ancillary systems or significantly advance the technology readiness level (TRL) of less mature systems like airbreathing, unconventional, and other launch technologies. In developing this roadmap, the LPSTA team consulted previous NASA, military, and industry studies as well as subject matter experts to develop their assessment of this field, which has fundamental technological and strategic impacts for US space capabilities.

[Methodological approaches to the development of environmentally benign technology for the use of solid waste in iron metallurgy].

PubMed

Pugin, K G; Vaĭsman, Ia I

2013-01-01

On the basis of the life cycle of materials, containing wastes of iron and steel industry, new methodological approaches to the assessment of technologies of the secondary use of wastes are developed A complex criteria for selection of the technology for the use of resource potential of solid waste of iron and steel industry are developed with taking into account environmental, technological and economic indices. The technology of the use of wastes of ferrovanadium industry as bulk solid materials at the solid waste landfill is shown.

Photovoltaic cell and array technology development for future unique NASA missions

NASA Technical Reports Server (NTRS)

Bailey, S.; Curtis, H.; Piszczor, M.; Surampudi, R.; Hamilton, T.; Rapp, D.; Stella, P.; Mardesich, N.; Mondt, J.; Bunker, R.;

Enabling reliability assessments of pre-commercial perovskite photovoltaics with lessons learned from industrial standards

NASA Astrophysics Data System (ADS)

Snaith, Henry J.; Hacke, Peter

2018-06-01

Photovoltaic modules are expected to operate in the field for more than 25 years, so reliability assessment is critical for the commercialization of new photovoltaic technologies. In early development stages, understanding and addressing the device degradation mechanisms are the priorities. However, any technology targeting large-scale deployment must eventually pass industry-standard qualification tests and undergo reliability testing to validate the module lifetime. In this Perspective, we review the methodologies used to assess the reliability of established photovoltaics technologies and to develop standardized qualification tests. We present the stress factors and stress levels for degradation mechanisms currently identified in pre-commercial perovskite devices, along with engineering concepts for mitigation of those degradation modes. Recommendations for complete and transparent reporting of stability tests are given, to facilitate future inter-laboratory comparisons and to further the understanding of field-relevant degradation mechanisms, which will benefit the development of accelerated stress tests.

Health technology assessment. Evaluation of biomedical innovative technologies.

PubMed

Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

2010-01-01

This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

Wired for the Future: Developing Your Library Technology Plan.

ERIC Educational Resources Information Center

Mayo, Diane; Nelson, Sandra

A technology plan provides a blueprint against which to measure new technologies and applications, assess future needs, and allocate resources to balance technology with the needs of users and staff. This book is a comprehensive and practical guide for librarians preparing a technology plan. The book is divided into five planning steps, each of…

New Electric Power Technologies: Problems and Prospects for the 1990s.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

This report responds to a request from the House Committee on Science and Technology and its Subcommittee on Energy Development and Applications to analyze a range of new electric power generating, storage, and load management technologies. The Office of Technology Assessment (OTA) examined these technologies in terms of their current and expected…

Multimethod-Multisource Approach for Assessing High-Technology Training Systems.

ERIC Educational Resources Information Center

Shlechter, Theodore M.; And Others

This investigation examined the value of using a multimethod-multisource approach to assess high-technology training systems. The research strategy was utilized to provide empirical information on the instructional effectiveness of the Reserve Component Virtual Training Program (RCVTP), which was developed to improve the training of Army National…

Benefit assessment of NASA space technology goals

NASA Technical Reports Server (NTRS)

1976-01-01

The socio-economic benefits to be derived from system applications of space technology goals developed by NASA were assessed. Specific studies include: electronic mail; personal telephone communications; weather and climate monitoring, prediction, and control; crop production forecasting and water availability; planetary engineering of the planet Venus; and planetary exploration.

High Performance Computing and Networking for Science--Background Paper.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. Office of Technology Assessment.

The Office of Technology Assessment is conducting an assessment of the effects of new information technologies--including high performance computing, data networking, and mass data archiving--on research and development. This paper offers a view of the issues and their implications for current discussions about Federal supercomputer initiatives…

A Qualitative Approach to Assessing Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Groth, Randall; Spickler, Donald; Bergner, Jennifer; Bardzell, Michael

2009-01-01

Because technological pedagogical content knowledge is becoming an increasingly important construct in the field of teacher education, there is a need for assessment mechanisms that capture teachers' development of this portion of the knowledge base for teaching. The paper describes a proposal drawing on qualitative data produced during lesson…

RECOVERY ACT - Methods for Decision under Technological Change Uncertainty and Risk Assessment for Integrated Assessment of Climate Change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Webster, Mort David

2015-03-10

This report presents the final outcomes and products of the project as performed at the Massachusetts Institute of Technology. The research project consists of three main components: methodology development for decision-making under uncertainty, improving the resolution of the electricity sector to improve integrated assessment, and application of these methods to integrated assessment. Results in each area is described in the report.

Brief Mindfulness Meditation Training in Smokers

DTIC Science & Technology

2013-03-11

the Use of Mobile Technology EMA involves assessing phenomena at the moment they occur in a person’s natural environment. Assessments may be done at...of mobile technology , especially smartphones and tablet computers, provides a soon-to-be ubiquitous platform that can be leveraged to introduce...acute effects of Brief-MM together with an EMA platform is the first step in developing the knowledge base and technology necessary for using a similar

System Study: Technology Assessment and Prioritizing

NASA Technical Reports Server (NTRS)

2005-01-01

The objective of this NASA funded project is to assess and prioritize advanced technologies required to achieve the goals for an "Intelligent Propulsion System" through collaboration among GEAE, NASA, and Georgia Tech. Key GEAE deliverables are parametric response surface equations (RSE's) relating technology features to system benefits (sfc, weight, fuel burn, design range, acoustics, emission, etc...) and listings of Technology Impact Matrix (TIM) with benefits, debits, and approximate readiness status. TIM has been completed for GEAE and NASA proposed technologies. The combined GEAE and NASA TIM input requirement is shown in Table.1. In the course of building the RSE's and TIM, significant parametric technology modeling and RSE accuracy improvements were accomplished. GEAE has also done preliminary ranking of the technologies using Georgia Tech/GEAE USA developed technology evaluation tools. System level impact was performed by combining beneficial technologies with minimum conflict among various system figures of merits to assess their overall benefits to the system. The shortfalls and issues with modeling the proposed technologies are identified, and recommendations for future work are also proposed.

Technology Assessment for Future MILSATCOM Systems; An Update of the EHF Bands

DTIC Science & Technology

1980-10-01

converging these efforts, the MSO has prepared a "Technology Development Program Plan" ( TDPP ). The TOPP defines a coordinated approach to the R&D...required to insure the availability of the technology necessary to support future systems. Some of the objectives of the TDPP are: to minimize...and TDPP have illuminated the need for technology development efforts directed toward minimizing the cost- risk and schedule-risk, and insuring the

Fossil Energy Program

NASA Astrophysics Data System (ADS)

McNeese, L. E.

1981-01-01

Increased utilization of coal and other fossil fuel alternatives as sources of clean energy is reported. The following topics are discussed: coal conversion development, chemical research and development, materials technology, component development and process evaluation studies, technical support to major liquefaction projects, process analysis and engineering evaluations, fossil energy environmental analysis, flue gas desulfurization, solid waste disposal, coal preparation waste utilization, plant control development, atmospheric fluidized bed coal combustor for cogeneration, TVA FBC demonstration plant program technical support, PFBC systems analysis, fossil fuel applications assessments, performance assurance system support for fossil energy projects, international energy technology assessment, and general equilibrium models of liquid and gaseous fuel supplies.

Automated Assessment of Child Vocalization Development Using LENA

ERIC Educational Resources Information Center

Richards, Jeffrey A.; Xu, Dongxin; Gilkerson, Jill; Yapanel, Umit; Gray, Sharmistha; Paul, Terrance

2017-01-01

Purpose: To produce a novel, efficient measure of children's expressive vocal development on the basis of automatic vocalization assessment (AVA), child vocalizations were automatically identified and extracted from audio recordings using Language Environment Analysis (LENA) System technology. Method: Assessment was based on full-day audio…

Community-based assessment and planning of energy futures

NASA Astrophysics Data System (ADS)

Carnes, S. A.

1981-04-01

The decentralized solar energy technology assessment program is discussed. Four communities were involved in an assessment of the compatibility of diverse conservation and renewable energy supply technologies and community values and goals and in community planning for the implementation of compatible energy demand and supply alternatives. The community approach has several basic components: (1) recruiting and organizing for the assessment planning process; (2) collection and analysis of data related to community energy use and indigenous renewable energy resources; (3) creation and maintenance of a community education and information program; (4) development of policies favorable to the development of preferred community futures; and (5) development of implementation or action strategies. The role of public participation, group decision making techniques, the role of technical information in citizen and group decision making, and linkage between assessment planning and the relevant policy process are emphasized.

Assessing Performance and Consequence Competence in a Technology-Based Professional Development for Agricultural Science Teachers: An Evaluation of the Lincoln Electric Welding Technology Workshop

ERIC Educational Resources Information Center

Saucier, P. Ryan; McKim, Billy R.; Muller, Joe E.; Kingman, Douglas M.

2014-01-01

Professional development education for teachers is essential to improving teacher retention, program relevance and effectiveness, and the preparation of fully qualified and highly motivated career and technology educators at all career stages (Doerfert, 2011; Lambeth, Elliot, & Joerger, 2008). Furthermore, it is necessary to link industry…

Environmental development plan for transportation programs: FY80 update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saricks, C.L.; Singh, M.K.; Bernard, M.J. III

1980-09-01

This is the second annual update of the environmental development plan (EDP) for transportation programs. It has been prepared as a cooperative effort of the Assistant Secretaries for Conservation and Solar Energy (ASCS) Office of Transportation Programs (CS/TP) and the Environment (ASEV) Office of Environmental Assessments. EDPs identify the ecosystem, resource, physical environment, health, safety, socioeconomic, and environmental control concerns associated with DOE programs. The programs include the research, development, demonstration, and assessment (RDD and A) of 14 transportation technologies and several strategy implementation projects. This EDP update presents a research and assessment plan for resolving any potentially adverse environmentalmore » concerns arising from these programs. The EDP process provides a framework for: incorporating environmental concerns into CS/TP planning and decision processes early to ensure they are assigned the same importance as technological, fiscal, and institutional concerns in decision making; resolving environmental concerns concurrently with energy technology and strategy development; and providing a research schedule that mitigates adverse environmental effects through sound technological design or policy analysis. This EDP also describes the status of each environmental concern and the plan for its resolution. Much of ongoing DOE reseirch and technology development is aimed at resolving concerns identified in this EDP. Each EDP is intended to be so comprehensive that no concerns escape notice. Care is taken to include any CS/TP action that may eventually require an Environmental Impact Statement. Because technology demonstration and commercialization tend to raise more environmental concerns than other portions of the transportation program, most of this EDP addresses these concerns.« less

Hypersonic engine seal development at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.

1994-01-01

NASA Lewis Research Center is developing advanced seal concepts and sealing technology for advanced combined cycle ramjet/scramjet engines being designed for the National Aerospace Plane (NASP). Technologies are being developed for both the dynamic seals that seal the sliding interfaces between articulating engine panels and sidewalls, and for the static seals that seal the heat exchanger to back-up structure interfaces. This viewgraph presentation provides an overview of the candidate engine seal concepts, seal material assessments, and unique test facilities used to assess the leakage and thermal performance of the seal concepts.

Hypersonic engine seal development at NASA Lewis Research Center

NASA Astrophysics Data System (ADS)

Steinetz, Bruce M.

1994-07-01

NASA Lewis Research Center is developing advanced seal concepts and sealing technology for advanced combined cycle ramjet/scramjet engines being designed for the National Aerospace Plane (NASP). Technologies are being developed for both the dynamic seals that seal the sliding interfaces between articulating engine panels and sidewalls, and for the static seals that seal the heat exchanger to back-up structure interfaces. This viewgraph presentation provides an overview of the candidate engine seal concepts, seal material assessments, and unique test facilities used to assess the leakage and thermal performance of the seal concepts.

Phase 2 environmental site investigation procedures and technologies for property transfer and PS and E development

DOT National Transportation Integrated Search

1999-05-01

The purpose of this project is to provide TxDOT with an improved procedure for conducting environmental site investigations at various stages during transportation infrastructure development. The project seeks to identify modern assessment technologi...

Process for Selecting System Level Assessments for Human System Technologies

NASA Technical Reports Server (NTRS)

Watts, James; Park, John

2006-01-01

The integration of many life support systems necessary to construct a stable habitat is difficult. The correct identification of the appropriate technologies and corresponding interfaces is an exhaustive process. Once technologies are selected secondary issues such as mechanical and electrical interfaces must be addressed. The required analytical and testing work must be approached in a piecewise fashion to achieve timely results. A repeatable process has been developed to identify and prioritize system level assessments and testing needs. This Assessment Selection Process has been defined to assess cross cutting integration issues on topics at the system or component levels. Assessments are used to identify risks, encourage future actions to mitigate risks, or spur further studies.

Sandia National Laboratories: Sandia National Laboratories: Missions:

Science.gov Websites

; Security Weapons Science & Technology Defense Systems & Assessments About Defense Systems & ; Development Technology Deployment Centers Working With Sandia Working With Sandia Prospective Suppliers What Information Construction & Facilities Contract Audit Sandia's Economic Impact Licensing & Technology

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

; Security Weapons Science & Technology Defense Systems & Assessments About Defense Systems & ; Development Technology Deployment Centers Working With Sandia Working With Sandia Prospective Suppliers What Information Construction & Facilities Contract Audit Sandia's Economic Impact Licensing & Technology

Defining the "proven technology" technical criterion in the reactor technology assessment for Malaysia's nuclear power program

NASA Astrophysics Data System (ADS)

Anuar, Nuraslinda; Kahar, Wan Shakirah Wan Abdul; Manan, Jamal Abdul Nasir Abd

2015-04-01

Developing countries that are considering the deployment of nuclear power plants (NPPs) in the near future need to perform reactor technology assessment (RTA) in order to select the most suitable reactor design. The International Atomic Energy Agency (IAEA) reported in the Common User Considerations (CUC) document that "proven technology" is one of the most important technical criteria for newcomer countries in performing the RTA. The qualitative description of five desired features for "proven technology" is relatively broad and only provides a general guideline to its characterization. This paper proposes a methodology to define the "proven technology" term according to a specific country's requirements using a three-stage evaluation process. The first evaluation stage screens the available technologies in the market against a predefined minimum Technology Readiness Level (TRL) derived as a condition based on national needs and policy objectives. The result is a list of technology options, which are then assessed in the second evaluation stage against quantitative definitions of CUC desired features for proven technology. The potential technology candidates produced from this evaluation is further narrowed down to obtain a list of proven technology candidates by assessing them against selected risk criteria and the established maximum allowable total score using a scoring matrix. The outcome of this methodology is the proven technology candidates selected using an accurate definition of "proven technology" that fulfills the policy objectives, national needs and risk, and country-specific CUC desired features of the country that performs this assessment. A simplified assessment for Malaysia is carried out to demonstrate and suggest the use of the proposed methodology. In this exercise, ABWR, AP1000, APR1400 and EPR designs assumed the top-ranks of proven technology candidates according to Malaysia's definition of "proven technology".

Science and technology objective (STO) to develop tests for detecting microbial and chemical contaminants in food and water

NASA Astrophysics Data System (ADS)

Knechtges, Paul L.; Gargan, Thomas P., II; Burrows, William D.

2002-02-01

The assurance of safe food and water is paramount to the health and performance of the warfighter. Any technology to assess the chemical and microbial purity of food and water under field conditions must meet rigorous criteria: it must be readily portable, provide timely results (no more than 4 hours), have adequate sensitivity (1 cfu/100 mL for potable water), be compatible with military power sources, and be of complexity appropriate for operation by a Preventive Medicine Specialist. The nomination of an Army Science and Technology Objective (STO) leads to assessment of existing technologies and commercial products; identification of users, regulators and developers; definition of essential capabilities; and consideration of potential obstructions. The U.S. Army Center for Environmental Health Research has identified a number of technologies for detecting microbial contaminants in food and water and has pursued development of the more promising examples. This paper examines developmental risks in the context of the STO and offers some insight and strategies to manage them.

How Are Alabama's Teachers Integrating the International Society for Technology in Education (ISTE) Standards in the Classroom: Measuring Technology Integration's IMPACT--Roberts Middle School.

ERIC Educational Resources Information Center

Ash, Stephanie B.; Sun, Feng; Sundin, Robert

Alabama's Preparing Tomorrow's Teachers To Use Technology program developed an assessment instrument to measure the level of technology integration into Alabama's classrooms. The instrument asked questions related to five factors: (1) general instruction integration; (2) teaching students to use technology; (3) managing technology resources; (4)…

The Design and Development of Identification of Students' Misconceptions in Individualized Learning Environment (iSMILE) System

ERIC Educational Resources Information Center

Bhagat, Kaushal Kumar; Subheesh, N. P.; Bhattacharya, Bani; Chang, Chun-Yen

2017-01-01

With the rapid development of technology, incorporation of Information Communication Technology (ICT) for formative assessment purpose has been increasing over the past decade. This article describes the design and development of identification of students' misconceptions in an individualized learning environment (iSMILE) system that includes…

TRL Assessment of Solar Sail Technology Development Following the 20-Meter System Ground Demonstrator Hardware Testing

NASA Technical Reports Server (NTRS)

Young, Roy M.; Adams, Charles L.

2010-01-01

The NASA In-Space Propulsion Technology (ISPT) Projects Office sponsored two separate, independent solar sail system design and development demonstration activities during 2002-2005. ATK Space Systems of Goleta, CA was the prime contractor for one development team and L' Garde, Inc. of Tustin, CA was the prime contractor for the other development team. The goal of these activities was to advance the technology readiness level (TRL) of solar sail propulsion from 3 towards 6 by the year 2006. Component and subsystem fabrication and testing were completed successfully, including the ground deployment of 10-meter and 20-meter demonstration hardware systems under vacuum conditions. The deployment and structural testing of the 20-meter solar sail systems was conducted in the 30 meter diameter Space Power Facility thermal-vacuum chamber at NASA Glenn Plum Brook in April though August, 2005. This paper will present the results of the TRL assessment following the solar sail technology development activities associated with the design, development, analysis and testing of the 20-meter system ground demonstrators.

Why CATTS Needs SPACE! Standards-Based Technology Curricula for Standards-Based Technology Programs

ERIC Educational Resources Information Center

Burke, Barry N.

2005-01-01

A recent discussion on ITEA's (International Technology Education Association's) IdeaGarden centered on the need for a "national curriculum." The idea of a national curriculum is one of great debate. Advancing Excellence in Technological Literacy (AETL) identifies criteria for student assessment, professional development, and programs that…

Technological Pedagogical Content Knowledge Development: Integrating Technology with a Research Teaching Perspective

ERIC Educational Resources Information Center

Guerra, Cecilia; Moreira, Antonio; Vieira, Rui

2017-01-01

Technological Pedagogical Content Knowledge (TPCK) represents the teachers' professional knowledge needed to integrate technology in education. Following a design-based approach this study describes the strategies for designing and assessing an in-service science teacher education course. Data was obtained through interviews, questionnaires, using…

National Research Council Dialogue to Assess Progress on NASA's Transformational Spaceport and Range Technologies Capability Roadmap Development: General Background and Introduction

NASA Technical Reports Server (NTRS)

Skelly, Darin M.

2005-01-01

Viewgraphs on the National Research Council's diaglog to assess progress on NASA's transformational spaceport and range technologies capability roadmap development is presented. The topics include: 1) Agency Goals and Objectives; 2) Strategic Planning Transformation; 3) Advanced Planning Organizational Roles; 4) Public Involvement in Strategic Planning; 5) Strategic Roadmaps; 6) Strategic Roadmaps Schedule; 7) Capability Roadmaps; 8) Capability Charter; 9) Process for Team Selection; 10) Capability Roadmap Development Schedule Overview; 11) Purpose of NRC Review; 12) Technology Readiness Levels; 13) Capability Readiness Levels; 14) Crosswalk Matrix Trans Spaceport & Range; 15) Example linkage to other roadmaps; 16) Capability Readiness Levels Defined; and 17) Crosswalk Matrix Ratings Work In-progress.

New Developments in the Technology Readiness Assessment Process in US DOE-EM - 13247

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krahn, Steven; Sutter, Herbert; Johnson, Hoyt

2013-07-01

A Technology Readiness Assessment (TRA) is a systematic, metric-based process and accompanying report that evaluates the maturity of the technologies used in systems; it is designed to measure technology maturity using the Technology Readiness Level (TRL) scale pioneered by the National Aeronautics and Space Administration (NASA) in the 1980's. More recently, DoD has adopted and provided systematic guidance for performing TRAs and determining TRLs. In 2007 the GAO recommended that the DOE adopt the NASA/DoD methodology for evaluating technology maturity. Earlier, in 2006-2007, DOE-EM had conducted pilot TRAs on a number of projects at Hanford and Savannah River. In Marchmore » 2008, DOE-EM issued a process guide, which established TRAs as an integral part of DOE-EM's Project Management Critical Decision Process. Since the development of its detailed TRA guidance in 2008, DOE-EM has continued to accumulate experience in the conduct of TRAs and the process for evaluating technology maturity. DOE has developed guidance on TRAs applicable department-wide. DOE-EM's experience with the TRA process, the evaluations that led to recently developed proposed revisions to the DOE-EM TRA/TMP Guide; the content of the proposed changes that incorporate the above lessons learned and insights are described. (authors)« less

Heritage and Advanced Technology Systems Engineering Lessons Learned from NASA Space Missions

NASA Technical Reports Server (NTRS)

Barley, Bryan; Newhouse, Marilyn; Bacskay, Allen

2010-01-01

Use of heritage and new technology is necessary/enabling to implementing small, low cost missions, yet overruns decrease the ability to sustain future mission flight rates The majority of the cost growth drivers seen in the D&NF study were embedded early during formulation phase and later realized during the development and I&T phases Cost drivers can be avoided or significantly decreased by project management and SE emphasis on early identification of risks and realistic analyses SE processes that emphasize an assessment of technology within the mission system to identify technical issues in the design or operational use of the technology. Realistic assessment of new and heritage spacecraft technology assumptions , identification of risks and mitigation strategies. Realistic estimates of effort required to inherit existing or qualify new technology, identification of risks to estimates and develop mitigation strategies. Allocation of project reserves for risk-based mitigation strategies of each individual area of heritage or new technology. Careful tailoring of inheritance processes to ensure due diligence.

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study.

PubMed

Schnall, Rebecca; Cho, Hwayoung; Liu, Jianfang

2018-01-05

Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. ©Rebecca Schnall, Hwayoung Cho, Jianfang Liu. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 05.01.2018.

Health Information Technology Usability Evaluation Scale (Health-ITUES) for Usability Assessment of Mobile Health Technology: Validation Study

PubMed Central

Cho, Hwayoung; Liu, Jianfang

2018-01-01

Background Mobile technology has become a ubiquitous technology and can be particularly useful in the delivery of health interventions. This technology can allow us to deliver interventions to scale, cover broad geographic areas, and deliver technologies in highly tailored ways based on the preferences or characteristics of users. The broad use of mobile technologies supports the need for usability assessments of these tools. Although there have been a number of usability assessment instruments developed, none have been validated for use with mobile technologies. Objective The goal of this work was to validate the Health Information Technology Usability Evaluation Scale (Health-ITUES), a customizable usability assessment instrument in a sample of community-dwelling adults who were testing the use of a new mobile health (mHealth) technology. Methods A sample of 92 community-dwelling adults living with HIV used a new mobile app for symptom self-management and completed the Health-ITUES to assess the usability of the app. They also completed the Post-Study System Usability Questionnaire (PSSUQ), a widely used and well-validated usability assessment tool. Correlations between these scales and each of the subscales were assessed. Results The subscales of the Health-ITUES showed high internal consistency reliability (Cronbach alpha=.85-.92). Each of the Health-ITUES subscales and the overall scale was moderately to strongly correlated with the PSSUQ scales (r=.46-.70), demonstrating the criterion validity of the Health-ITUES. Conclusions The Health-ITUES has demonstrated reliability and validity for use in assessing the usability of mHealth technologies in community-dwelling adults living with a chronic illness. PMID:29305343

Summary of Research Report Cooperative Agreement

NASA Technical Reports Server (NTRS)

1997-01-01

Several areas of work related to commercialization of technology developed at NASA Ames Research Center (ARC) are discussed in this report. The areas are: (1) perform a feasibility study to develop a software commercialization center is at ARC; (2) perform preliminary work for formation of joint development of sensor technology for telemedicine applications; (3) development of a discovery interview process and staff training to assist the commercialization of technology developed at Ames, specifically aimed at working with researchers; (4) develop partners to further develop and commercialize image compression technology developed at AMES; (5) assist efforts to commercialize a software technology which imparts the ability to establish relevance-based retrieval in the handling of large repositories of information; (6) explore the development of cryocooler technology using pulse tube refrigeration; (7) assess interest in commercialization of a new method of measuring skin friction drag on wind tunnel models using liquid crystal material; (8) attempt to incorporate emerging technologies in the infrastructure of natural hazards mitigation; and (9) forming a nonprofit organization, "The Bootstrap Alliance", whose mission is to promote the use of digital technologies for collaborative problem solving. The results of these initiatives are discussed.

EAST: Developing an Electronic Assessment and Storage Tool.

ERIC Educational Resources Information Center

Edwards, Katherine I.; Fernandez, Eugenia; Milionis, Tracey M.; Williamson, David M.

2002-01-01

Describes the purpose, development, analysis, prototyping, and features of the Electronic Assessment and Storage Tool (EAST). The Web-based system aids curriculum assessment at Purdue School of Engineering and Technology at Indiana University Purdue University Indianapolis through the ability to easily store artifacts in electronic form, support…

What influences the choice of assessment methods in health technology assessments? Statistical analysis of international health technology assessments from 1989 to 2002.

PubMed

Draborg, Eva; Andersen, Christian Kronborg

2006-01-01

Health technology assessment (HTA) has been used as input in decision making worldwide for more than 25 years. However, no uniform definition of HTA or agreement on assessment methods exists, leaving open the question of what influences the choice of assessment methods in HTAs. The objective of this study is to analyze statistically a possible relationship between methods of assessment used in practical HTAs, type of assessed technology, type of assessors, and year of publication. A sample of 433 HTAs published by eleven leading institutions or agencies in nine countries was reviewed and analyzed by multiple logistic regression. The study shows that outsourcing of HTA reports to external partners is associated with a higher likelihood of using assessment methods, such as meta-analysis, surveys, economic evaluations, and randomized controlled trials; and with a lower likelihood of using assessment methods, such as literature reviews and "other methods". The year of publication was statistically related to the inclusion of economic evaluations and shows a decreasing likelihood during the year span. The type of assessed technology was related to economic evaluations with a decreasing likelihood, to surveys, and to "other methods" with a decreasing likelihood when pharmaceuticals were the assessed type of technology. During the period from 1989 to 2002, no major developments in assessment methods used in practical HTAs were shown statistically in a sample of 433 HTAs worldwide. Outsourcing to external assessors has a statistically significant influence on choice of assessment methods.

Long life Regenerative Fuel Cell technology development plan

NASA Technical Reports Server (NTRS)

Littman, Franklin D.; Cataldo, Robert L.; Mcelroy, James F.; Stedman, Jay K.

1992-01-01

This paper summarizes a technology roadmap for completing advanced development of a Proton Exchange Membrane (PEM) Regenerative Fuel Cell (RFC) to meet long life (20,000 hrs at 50 percent duty cycle) mobile or portable power system applications on the surface of the moon and Mars. Development of two different sized RFC power system modules is included in this plan (3 and 7.5 kWe). A conservative approach was taken which includes the development of a Ground Engineering System, Qualification Unit, and Flight Unit. This paper includes a concept description, technology assessment, development issues, development tasks, and development schedule.

Advanced Technology Composite Fuselage-Structural Performance

NASA Technical Reports Server (NTRS)

Walker, T. H.; Minguet, P. J.; Flynn, B. W.; Carbery, D. J.; Swanson, G. D.; Ilcewicz, L. B.

1997-01-01

Boeing is studying the technologies associated with the application of composite materials to commercial transport fuselage structure under the NASA-sponsored contracts for Advanced Technology Composite Aircraft Structures (ATCAS) and Materials Development Omnibus Contract (MDOC). This report addresses the program activities related to structural performance of the selected concepts, including both the design development and subsequent detailed evaluation. Design criteria were developed to ensure compliance with regulatory requirements and typical company objectives. Accurate analysis methods were selected and/or developed where practical, and conservative approaches were used where significant approximations were necessary. Design sizing activities supported subsequent development by providing representative design configurations for structural evaluation and by identifying the critical performance issues. Significant program efforts were directed towards assessing structural performance predictive capability. The structural database collected to perform this assessment was intimately linked to the manufacturing scale-up activities to ensure inclusion of manufacturing-induced performance traits. Mechanical tests were conducted to support the development and critical evaluation of analysis methods addressing internal loads, stability, ultimate strength, attachment and splice strength, and damage tolerance. Unresolved aspects of these performance issues were identified as part of the assessments, providing direction for future development.

Assessing Advanced Technology in CENATE

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tallent, Nathan R.; Barker, Kevin J.; Gioiosa, Roberto

PNNL's Center for Advanced Technology Evaluation (CENATE) is a new U.S. Department of Energy center whose mission is to assess and facilitate access to emerging computing technology. CENATE is assessing a range of advanced technologies, from evolutionary to disruptive. Technologies of interest include the processor socket (homogeneous and accelerated systems), memories (dynamic, static, memory cubes), motherboards, networks (network interface cards and switches), and input/output and storage devices. CENATE is developing a multi-perspective evaluation process based on integrating advanced system instrumentation, performance measurements, and modeling and simulation. We show evaluations of two emerging network technologies: silicon photonics interconnects and the Datamore » Vortex network. CENATE's evaluation also addresses the question of which machine is best for a given workload under certain constraints. We show a performance-power tradeoff analysis of a well-known machine learning application on two systems.« less

An Exploration of Scenarios to Support Sustainable Land Management Using Integrated Environmental Socio-economic Models

NASA Astrophysics Data System (ADS)

Fleskens, L.; Nainggolan, D.; Stringer, L. C.

2014-11-01

Scenario analysis constitutes a valuable deployment method for scientific models to inform environmental decision-making, particularly for evaluating land degradation mitigation options, which are rarely based on formal analysis. In this paper we demonstrate such an assessment using the PESERA-DESMICE modeling framework with various scenarios for 13 global land degradation hotspots. Starting with an initial assessment representing land degradation and productivity under current conditions, options to combat instances of land degradation are explored by determining: (1) Which technologies are most biophysically appropriate and most financially viable in which locations; we term these the "technology scenarios"; (2) how policy instruments such as subsidies influence upfront investment requirements and financial viability and how they lead to reduced levels of land degradation; we term these the "policy scenarios"; and (3) how technology adoption affects development issues such as food production and livelihoods; we term these the "global scenarios". Technology scenarios help choose the best technology for a given area in biophysical and financial terms, thereby outlining where policy support may be needed to promote adoption; policy scenarios assess whether a policy alternative leads to a greater extent of technology adoption; while global scenarios demonstrate how implementing technologies may serve wider sustainable development goals. Scenarios are applied to assess spatial variation within study sites as well as to compare across different sites. Our results show significant scope to combat land degradation and raise agricultural productivity at moderate cost. We conclude that scenario assessment can provide informative input to multi-level land management decision-making processes.

An exploration of scenarios to support sustainable land management using integrated environmental socio-economic models.

PubMed

Fleskens, L; Nainggolan, D; Stringer, L C

2014-11-01

Scenario analysis constitutes a valuable deployment method for scientific models to inform environmental decision-making, particularly for evaluating land degradation mitigation options, which are rarely based on formal analysis. In this paper we demonstrate such an assessment using the PESERA-DESMICE modeling framework with various scenarios for 13 global land degradation hotspots. Starting with an initial assessment representing land degradation and productivity under current conditions, options to combat instances of land degradation are explored by determining: (1) Which technologies are most biophysically appropriate and most financially viable in which locations; we term these the "technology scenarios"; (2) how policy instruments such as subsidies influence upfront investment requirements and financial viability and how they lead to reduced levels of land degradation; we term these the "policy scenarios"; and (3) how technology adoption affects development issues such as food production and livelihoods; we term these the "global scenarios". Technology scenarios help choose the best technology for a given area in biophysical and financial terms, thereby outlining where policy support may be needed to promote adoption; policy scenarios assess whether a policy alternative leads to a greater extent of technology adoption; while global scenarios demonstrate how implementing technologies may serve wider sustainable development goals. Scenarios are applied to assess spatial variation within study sites as well as to compare across different sites. Our results show significant scope to combat land degradation and raise agricultural productivity at moderate cost. We conclude that scenario assessment can provide informative input to multi-level land management decision-making processes.

Technology Development Plan for the Baseline Detector System of the X-Ray Microcalorimeter Spectrometer (XMS) of the International X-Ray Observatory (IXO)

NASA Technical Reports Server (NTRS)

Kilbourne, C. A.; Boriese, W. B.

2010-01-01

The primary purpose of this document is to present the technology development plan for the XMS detector system. It covers the current status (including assessment of the Technology Readiness Level, TRL, and a justification of the level assigned), the roadmap to progress to a level between TRL 5 and TRL 6 by the middle of 2012, and an assessment of the associated cost. A secondary purpose of this document is to address the Action Items raised at the XMS Phase-A Study Mid-Term Review that pertain to the detector system (AI #4, #8, and #9).

Arsenic Treatment Technology Demonstrations

EPA Pesticide Factsheets

EPA’s research for the new Arsenic Rule focused on the development and evaluation of innovative methods and cost-effective technologies for improving the assessment and control of arsenic contamination.

Review of NASA's Exploration Technology Development Program: An Interim Report. [ISBN 0-309-11944-8 (place in D020A)

NASA Technical Reports Server (NTRS)

2008-01-01

NASA requested that a committee under the auspices of the National Research Council's Aeronautics and Space Engineering Board carry out an assessment of NASA's Exploration Technology Development Program (ETDP). Organizationally, this program functions under the direction of NASA's Exploration Systems Mission Directorate and is charged with developing new technologies that will enable NASA to conduct future human and robotic exploration missions, while reducing mission risk and cost. The Committee to Review NASA's Exploration Technology Development Program has been tasked to examine how well the program is aligned with the stated objectives of the President's Vision for Space Exploration (VSE), to identify gaps in the program, and to assess the quality of the research. The full statement of task is given in Appendix A. The committee consists of 25 members and includes a cross section of senior executives, engineers, researchers, and other aerospace professionals drawn from industry, universities, and government agencies with expertise in virtually all the technical fields represented within the program.

OAST Space Theme Workshop. Volume 3: Working group summary. 4: Software (E-4). A. Summary. B. Technology needs (form 1). C. Priority assessment (form 2)

NASA Technical Reports Server (NTRS)

1976-01-01

Only a few efforts are currently underway to develop an adequate technology base for the various themes. Particular attention must be given to software commonality and evolutionary capability, to increased system integrity and autonomy; and to improved communications among the program users, the program developers, and the programs themselves. There is a need for quantum improvement in software development methods and increasing the awareness of software by all concerned. Major thrusts identified include: (1) data and systems management; (2) software technology for autonomous systems; (3) technology and methods for improving the software development process; (4) advances related to systems of software elements including their architecture, their attributes as systems, and their interfaces with users and other systems; and (5) applications of software including both the basic algorithms used in a number of applications and the software specific to a particular theme or discipline area. The impact of each theme on software is assessed.

Next Generation Life Support: High Performance EVA Glove

NASA Technical Reports Server (NTRS)

Walsh, Sarah K.

2015-01-01

The objectives of the High Performance EVA Glove task are to develop advanced EVA gloves for future human space exploration missions and generate corresponding standards by which progress may be quantitatively assessed. New technologies and manufacturing techniques will be incorporated into the new gloves to address finger and hand mobility, injury reduction and durability in nonpristine environments. Three prototypes will be developed, each focusing on different technological advances. A robotic assist glove will integrate a powered grasping system into the current EVA glove design to reduce astronaut hand fatigue and hand injuries. A mechanical counter pressure (MCP) glove will be developed to further explore the potential of MCP technology and assess its capability for countering the effects of vacuum or low pressure environments on the body by using compression fabrics or materials to apply the necessary pressure. A gas pressurized glove, incorporating new technologies, will be the most flight-like of the three prototypes. Advancements include the development and integration of aerogel insulation, damage sensing components, dust-repellant coatings, and dust tolerant bearings.

Health technology assessment: research trends and future priorities in Europe.

PubMed

Nielsen, Camilla Palmhøj; Funch, Tina Maria; Kristensen, Finn Børlum

2011-07-01

To provide an overview of health services research related to health technology assessment (HTA) and to identify research priorities from a European perspective. Several methods were used: systematic review of articles indexed with the MeSH term 'technology assessment' in PubMed from February 1999-2009; online survey among experts; and conference workshop discussions. Research activity in HTA varies considerably across Europe. The research was categorised into six areas: (1) the breadth of analysis in HTA (such as economic, organizational and social aspects); (2) HTA products developed to meet the needs of policy-makers (such as horizon scanning, mini-HTA, and core HTA); (3) handling life-cycle perspectives in relation to technologies; (4) topics that challenge existing methods and for which HTA should be developed to address the themes more comprehensively (such as public health interventions and organizational interventions); (5) development of HTA capacity and programmes; and (6) links between policy and HTA. An online survey showed that the three areas that were given priority were the relationship between HTA and policy-making (71%), the impact of HTA (62%) and incorporating patient aspects in HTA (50%). Policy-makers highlighted HTA and innovation processes as their main research priority (42%). Areas that the systematic review identified as future priorities include issues within the six existing research areas such as disinvestment, developing evidence for new technologies, assessing the wider effects of technology use, and determining how HTA affects decision-making. In addition, relative effectiveness and individualized treatments are areas of growing interest. The research priorities identified are important for obtaining high quality and cost-effective health care in Europe. Managing the introduction, use and phasing out of technologies challenges health services throughout Europe, and these processes need to be improved to successfully manage future more general challenges. An ageing population and a diminishing workforce both require strong efforts to ensure effective and well-organized use of human resources and technologies. Furthermore, Europe needs to focus on innovation. This is closely linked to use of technologies and calls for future research.

Engaging Faculty in the Assessment and Improvement of Students' Critical Thinking Using the Critical Thinking Assessment Test

ERIC Educational Resources Information Center

Stein, Barry; Haynes, Ada

2011-01-01

Many assessment experts believe it is essential to develop faculty-driven assessment tools in order to engage faculty in meaningful assessment that can improve student learning. Tennessee Technological University (TTU) has been involved in an extended effort during the last ten years to develop, refine, and nationally disseminate an instrument to…

VENTILATION TECHNOLOGY SYSTEMS ANALYSIS

EPA Science Inventory

The report gives results of a project to develop a systems analysis of ventilation technology and provide a state-of-the-art assessment of ventilation and indoor air quality (IAQ) research needs. (NOTE: Ventilation technology is defined as the hardware necessary to bring outdoor ...

Athletic Training Student Active Learning Time with and without the Use of Bug-In-Ear Technology

ERIC Educational Resources Information Center

Nottingham, Sara L.; Montgomery, Melissa M.; Kasamatsu, Tricia M.

2017-01-01

Context: Clinical education experiences that actively engage students in patient care are important to the development of competent clinicians. It is important to assess athletic training students' time spent clinically and explore new technology that may facilitate more active learning during clinical education. Objective: To assess athletic…

Interactive Technologies for Teacher Training: Comparing Performance and Assessment in Second Life and simSchool

ERIC Educational Resources Information Center

Meritt, Julia; Gibson, David; Christensen, Rhonda; Knezek, Gerald

2013-01-01

Two alternative technologies forming the basis of computer-mediated teacher preparation systems are compared and contrasted regarding implementation, operation, and assessment considerations. The role-playing system in Second Life is shown to have the unique characteristic of developing a co-constructed pedagogical identity, while the flight…

How Developments in Psychology and Technology Challenge Validity Argumentation

ERIC Educational Resources Information Center

Mislevy, Robert J.

2016-01-01

Validity is the sine qua non of properties of educational assessment. While a theory of validity and a practical framework for validation has emerged over the past decades, most of the discussion has addressed familiar forms of assessment and psychological framings. Advances in digital technologies and in cognitive and social psychology have…

Assessment in the Digital Age: An Overview of Online Tools and Considerations for School Psychologists and School Counsellors

ERIC Educational Resources Information Center

Jellins, Laura

2015-01-01

With recent developments in technology, online tests and digital tools offer school psychologists and school counsellors alternate modes of assessment. These new technologies have the potential to increase accessibility to tests (through greater portability), allow school psychologists and school counsellors to service more students (through…

Condition Assessment of Ferrous Water Transmission and Distribution Systems State of Technology Review Report

EPA Science Inventory

This White Paper was developed to serve as the basis for discussion at a Technology Forum on Condition Assessment of Water Transmission and Distribution Systems that was held on September 9 and 10, 2008, at Edison, NJ. It was distributed to the Forum participants for review in a...

Eliciting and Assessing Reflective Practice: A Case Study in Web 2.0 Technologies

ERIC Educational Resources Information Center

Parkes, Kelly A.; Kajder, Sara

2010-01-01

This paper focuses on the role of multimodal technologies in facilitating reflective processes and the subsequent assessment of reflectivity for students in pre-professional programs. Reflective practice has been established as a critical tool for developing identity in and on practice. This paper will focus firstly on reviewing salient literature…

Using Qualitative Research to Assess Teaching and Learning in Technology-Infused TILE Classrooms

ERIC Educational Resources Information Center

Van Horne, Sam; Murniati, Cecilia Titiek; Saichaie, Kem; Jesse, Maggie; Florman, Jean C.; Ingram, Beth F.

2014-01-01

This chapter describes the results of an assessment project whose purpose was to improve the faculty-development program for instructors who teach in technology-infused TILE (Transform, Interact, Learn, Engage) classrooms at the University of Iowa. Qualitative research methods were critical for (1) learning about how students and instructors…

Interactions of technology and society: Impacts of improved airtransport. A study of airports at the grass roots. [in rural communities

NASA Technical Reports Server (NTRS)

Laporte, T.; Rosenthal, S.; Ross, S.; Lee, K. N.; Levine, E.

1977-01-01

The feasibility of applying a particular conception of technology and social change to specific examples of technological development was investigated. The social and economic effects of improved airport capabilities on rural communities were examined. Factors which led to the successful implementation of a plan to construct sixty small airports in Ohio are explored and implications derived for forming public policies, evaluating air transportation development, and assessing technology.

NASA Aerospace Flight Battery Systems Program Update

NASA Technical Reports Server (NTRS)

Manzo, Michelle; ODonnell, Patricia

1997-01-01

The objectives of NASA's Aerospace Flight Battery Systems Program is to: develop, maintain and provide tools for the validation and assessment of aerospace battery technologies; accelerate the readiness of technology advances and provide infusion paths for emerging technologies; provide NASA projects with the required database and validation guidelines for technology selection of hardware and processes relating to aerospace batteries; disseminate validation and assessment tools, quality assurance, reliability, and availability information to the NASA and aerospace battery communities; and ensure that safe, reliable batteries are available for NASA's future missions.

Development of Thermal Protection Materials for Future Mars Entry, Descent and Landing Systems

NASA Technical Reports Server (NTRS)

Cassell, Alan M.; Beck, Robin A. S.; Arnold, James O.; Hwang, Helen; Wright, Michael J.; Szalai, Christine E.; Blosser, Max; Poteet, Carl C.

2010-01-01

Entry Systems will play a crucial role as NASA develops the technologies required for Human Mars Exploration. The Exploration Technology Development Program Office established the Entry, Descent and Landing (EDL) Technology Development Project to develop Thermal Protection System (TPS) materials for insertion into future Mars Entry Systems. An assessment of current entry system technologies identified significant opportunity to improve the current state of the art in thermal protection materials in order to enable landing of heavy mass (40 mT) payloads. To accomplish this goal, the EDL Project has outlined a framework to define, develop and model the thermal protection system material concepts required to allow for the human exploration of Mars via aerocapture followed by entry. Two primary classes of ablative materials are being developed: rigid and flexible. The rigid ablatives will be applied to the acreage of a 10x30 m rigid mid L/D Aeroshell to endure the dual pulse heating (peak approx.500 W/sq cm). Likewise, flexible ablative materials are being developed for 20-30 m diameter deployable aerodynamic decelerator entry systems that could endure dual pulse heating (peak aprrox.120 W/sq cm). A technology Roadmap is presented that will be used for facilitating the maturation of both the rigid and flexible ablative materials through application of decision metrics (requirements, key performance parameters, TRL definitions, and evaluation criteria) used to assess and advance the various candidate TPS material technologies.

System Analyses of Pneumatic Technology for High Speed Civil Transport Aircraft

NASA Technical Reports Server (NTRS)

Mavris, Dimitri N.; Tai, Jimmy C.; Kirby, Michelle M.; Roth, Bryce A.

1999-01-01

The primary aspiration of this study was to objectively assess the feasibility of the application of a low speed pneumatic technology, in particular Circulation Control (CC) to an HSCT concept. Circulation Control has been chosen as an enabling technology to be applied on a generic High Speed Civil Transport (HSCT). This technology has been proven for various subsonic vehicles including flight tests on a Navy A-6 and computational application on a Boeing 737. Yet, CC has not been widely accepted for general commercial fixed-wing use but its potential has been extensively investigated for decades in wind tunnels across the globe for application to rotorcraft. More recently, an experimental investigation was performed at Georgia Tech Research Institute (GTRI) with application to an HSCT-type configuration. The data from those experiments was to be applied to a full-scale vehicle to assess the impact from a system level point of view. Hence, this study attempted to quantitatively assess the impact of this technology to an HSCT. The study objective was achieved in three primary steps: 1) Defining the need for CC technology; 2) Wind tunnel data reduction; 3) Detailed takeoff/landing performance assessment. Defining the need for the CC technology application to an HSCT encompassed a preliminary system level analysis. This was accomplished through the utilization of recent developments in modern aircraft design theory at Aerospace Systems Design Laboratory (ASDL). These developments include the creation of techniques and methods needed for the identification of technical feasibility show stoppers. These techniques and methods allow the designer to rapidly assess a design space and disciplinary metric enhancements to enlarge or improve the design space. The takeoff and landing field lengths were identified as the concept "show-stoppers". Once the need for CC was established, the actual application of data and trends was assessed. This assessment entailed a reduction of the wind tunnel data from the experiments performed by Mr. Bob Englar at the GTRI. Relevant data was identified and manipulated based on the required format of the analysis tools utilized. Propulsive, aerodynamic, duct sizing, and vehicle sizing investigations were performed and information supplied to a detailed takeoff and landing tool, From the assessments, CC was shown to improve the low speed performance metrics, which were previously not satisfied. An HSCT with CC augmentation does show potential for full-scale application. Yet, an economic assessment of an HSCT with and without CC showed that a moderate penalty was incurred from the increased RDT&E costs associated with developing the CC technology and slight increases in empty weight.

A multi-criteria analysis of options for energy recovery from municipal solid waste in India and the UK.

PubMed

Yap, H Y; Nixon, J D

2015-12-01

Energy recovery from municipal solid waste plays a key role in sustainable waste management and energy security. However, there are numerous technologies that vary in suitability for different economic and social climates. This study sets out to develop and apply a multi-criteria decision making methodology that can be used to evaluate the trade-offs between the benefits, opportunities, costs and risks of alternative energy from waste technologies in both developed and developing countries. The technologies considered are mass burn incineration, refuse derived fuel incineration, gasification, anaerobic digestion and landfill gas recovery. By incorporating qualitative and quantitative assessments, a preference ranking of the alternative technologies is produced. The effect of variations in decision criteria weightings are analysed in a sensitivity analysis. The methodology is applied principally to compare and assess energy recovery from waste options in the UK and India. These two countries have been selected as they could both benefit from further development of their waste-to-energy strategies, but have different technical and socio-economic challenges to consider. It is concluded that gasification is the preferred technology for the UK, whereas anaerobic digestion is the preferred technology for India. We believe that the presented methodology will be of particular value for waste-to-energy decision-makers in both developed and developing countries. Copyright © 2015 Elsevier Ltd. All rights reserved.

A PROCESS OF PRIORITIZING TOPICS FOR HEALTH TECHNOLOGY ASSESSMENT IN KAZAKHSTAN.

PubMed

Kosherbayeva, Lyazzat; Hailey, David; Kurakbaev, Kural; Tabarov, Adlet; Kumar, Ainur; Gutzskaya, Gulnara; Stepkina, Elena

2016-01-01

The aim of this study was to develop criteria for the prioritization of topics for health technology assessment (HTA) in the healthcare system of Kazakhstan. Initial proposals for criteria were suggested through consultation with Ministry of Health (MoH) policy areas. These were refined through a workshop attended by HTA department staff, persons from medical universities and research institutes, and MoH policy makers. The workshop included discussion on methods used in international HTA practice. Opinions of participants on selection of criteria from those specified in a review of prioritization processes were used to define a list for inclusion in an instrument for routine use. A scoring system was established in later discussion. Selected criteria for HTA prioritization were burden of disease, availability of alternative technology, clinical effectiveness, economic efficiency, budget impact, and ethical, legal, and/or psychosocial aspects. For each criterion, a health technology under consideration is given a score from 3 (High) to 1 (Low). The total score determines whether the technology is of high to medium priority or of low priority. Determination of priorities for assessment, using the instrument, should be carried out by an expert group appointed by the MoH. The process was applied in 2014 to a selection of topics, and three health technologies were chosen for full assessments. Criteria for prioritization have evolved with development of the HTA program in Kazakhstan. A method for HTA prioritization has been developed that is easy to apply, requires comparatively few resources, and is compatible with processes required by the MoH.

The impact of assay technology as applied to safety assessment in reducing compound attrition in drug discovery.

PubMed

Thomas, Craig E; Will, Yvonne

2012-02-01

Attrition in the drug industry due to safety findings remains high and requires a shift in the current safety testing paradigm. Many companies are now positioning safety assessment at each stage of the drug development process, including discovery, where an early perspective on potential safety issues is sought, often at chemical scaffold level, using a variety of emerging technologies. Given the lengthy development time frames of drugs in the pharmaceutical industry, the authors believe that the impact of new technologies on attrition is best measured as a function of the quality and timeliness of candidate compounds entering development. The authors provide an overview of in silico and in vitro models, as well as more complex approaches such as 'omics,' and where they are best positioned within the drug discovery process. It is important to take away that not all technologies should be applied to all projects. Technologies vary widely in their validation state, throughput and cost. A thoughtful combination of validated and emerging technologies is crucial in identifying the most promising candidates to move to proof-of-concept testing in humans. In spite of the challenges inherent in applying new technologies to drug discovery, the successes and recognition that we cannot continue to rely on safety assessment practices used for decades have led to rather dramatic strategy shifts and fostered partnerships across government agencies and industry. We are optimistic that these efforts will ultimately benefit patients by delivering effective and safe medications in a timely fashion.

Technology Assessment for the Future Aeronautical Communications System

NASA Technical Reports Server (NTRS)

Budinger, James M. (Technical Monitor)

2005-01-01

To address emerging saturation in the VHF aeronautical bands allocated internationally for air traffic management communications, the International Civil Aviation Organization (ICAO) has requested development of a common global solution through its Aeronautical Communications Panel (ACP). In response, the Federal Aviation Administration (FAA) and Eurocontrol initiated a joint study, with the support of NASA and U.S. and European contractors, to provide major findings on alternatives and recommendations to the ICAO ACP Working Group C (WG-C). Under an FAA/Eurocontrol cooperative research and development agreement, ACP WG-C Action Plan 17 (AP-17), commonly referred to as the Future Communications Study (FCS), NASA Glenn Research Center is responsible for the investigation of potential communications technologies that support the long-term mobile communication operational concepts of the FCS. This report documents the results of the first phase of the technology assessment and recommendations referred to in the Technology Pre-Screening Task 3.1 of AP-17. The prescreening identifies potential technologies that are under development in the industry and provides an initial assessment against a harmonized set of evaluation criteria that address high level capabilities, projected maturity for the time frame for usage in aviation, and potential applicability to aviation. A wide variety of candidate technologies were evaluated from several communications service categories including: cellular telephony; IEEE-802.xx standards; public safety radio; satellite and over-the-horizon communications; custom narrowband VHF; custom wideband; and military communications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, D.F.

This year`s Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage themore » reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stevens, D.F.

This year's Information Technology Resources Assessment (ITRA) is something of a departure from traditional practice. Past assessments have concentrated on developments in fundamental technology, particularly with respect to hardware. They form an impressive chronicle of decreasing cycle times, increasing densities, decreasing costs (or, equivalently, increasing capacity and capability per dollar spent), and new system architectures, with a leavening of operating systems and languages. Past assessments have aimed -- and succeeded -- at putting information technology squarely in the spotlight; by contrast, in the first part of this assessment, we would like to move it to the background, and encourage themore » reader to reflect less on the continuing technological miracles of miniaturization in space and time and more on the second- and third-order implications of some possible workplace applications of these miracles. This Information Technology Resources Assessment is intended to provide a sense of technological direction for planners in projecting the hardware, software, and human resources necessary to support the diverse IT requirements of the various components of the DOE community. It is also intended to provide a sense of our new understanding of the place of IT in our organizations.« less

Heavy vehicle driver workload assessment : executive summary

DOT National Transportation Integrated Search

1996-10-01

This report summarizes a program of research to develop methods, data, and guidelines to conduct heavy vehicle driver-oriented workload assessments of new, high-technology, in-cab devices. Many such devices are being developed and implemented in heav...

Capacity factor analysis for evaluating water and sanitation infrastructure choices for developing communities.

PubMed

Bouabid, Ali; Louis, Garrick E

2015-09-15

40% of the world's population lacks access to adequate supplies of water and sanitation services to sustain human health. In fact, more than 780 million people lack access to safe water supplies and about 2.5 billion people lack access to basic sanitation. Appropriate technology for water supply and sanitation (Watsan) systems is critical for sustained access to these services. Current approaches for the selection of Watsan technologies in developing communities have a high failure rate. It is estimated that 30%-60% of Watsan installed infrastructures in developing countries are not operating. Inappropriate technology is a common explanation for the high rate of failure of Watsan infrastructure, particularly in lower-income communities (Palaniappan et al., 2008). This paper presents the capacity factor analysis (CFA) model, for the assessment of a community's capacity to manage and sustain access to water supply and sanitation services. The CFA model is used for the assessment of a community's capacity to operate, and maintain a municipal sanitation service (MSS) such as, drinking water supply, wastewater and sewage treatment, and management of solid waste. The assessment of the community's capacity is based on seven capacity factors that have been identified as playing a key role in the sustainability of municipal sanitation services in developing communities (Louis, 2002). These capacity factors and their constituents are defined for each municipal sanitation service. Benchmarks and international standards for the constituents of the CFs are used to assess the capacity factors. The assessment of the community's capacity factors leads to determine the overall community capacity level (CCL) to manage a MSS. The CCL can then be used to assist the community in the selection of appropriate Watsan technologies for their MSS needs. The selection is done from Watsan technologies that require a capacity level to operate them that matches the assessed CCL of the community. Copyright © 2015 Elsevier Ltd. All rights reserved.

Information Technology Assessment Study: Executive Summary

NASA Technical Reports Server (NTRS)

Peterson, John (Editor)

2002-01-01

A team was formed to assess NASA Office of Space Science (OSS) information technology research and development activities. These activities were reviewed for their relevance to OSS missions, for their potential for using products better supplied by industry or other government agencies, and for recommending an IT infusion strategy for appropriate products for OSS missions. Assessment scope and methodology and the findings and recommendations of OSS IT users and providers are presented.

Broadband Satellite Technologies and Markets Assessed

NASA Technical Reports Server (NTRS)

Wallett, Thomas M.

1999-01-01

The current usage of broadband (data rate greater than 64 kilobits per second (kbs)) for multimedia network computer applications is increasing, and the need for network communications technologies and systems to support this use is also growing. Satellite technology will likely be an important part of the National Information Infrastructure (NII) and the Global Information Infrastructure (GII) in the next decade. Several candidate communications technologies that may be used to carry a portion of the increased data traffic have been reviewed, and estimates of the future demand for satellite capacity have been made. A study was conducted by the NASA Lewis Research Center to assess the satellite addressable markets for broadband applications. This study effort included four specific milestones: (1) assess the changing nature of broadband applications and their usage, (2) assess broadband satellite and terrestrial technologies, (3) estimate the size of the global satellite addressable market from 2000 to 2010, and (4) identify how the impact of future technology developments could increase the utility of satellite-based transport to serve this market.

Using Innovative Technology to Develop Sustainable Assessment Practices in Marketing Education

ERIC Educational Resources Information Center

Debuse, Justin C. W.; Lawley, Meredith

2011-01-01

Timely, constructive feedback on assessment is critically important to students and yet is increasingly difficult for time-poor academics to consistently provide. Marketing educators also face pressure to incorporate sustainability into both the curriculum and practices such as assessment. This article outlines the development of an innovative…

Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

NASA Technical Reports Server (NTRS)

Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

1985-01-01

Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

Evaluation of spacecraft technology programs (effects on communication satellite business ventures), volume 1

NASA Astrophysics Data System (ADS)

Greenburg, J. S.; Gaelick, C.; Kaplan, M.; Fishman, J.; Hopkins, C.

1985-09-01

Commercial organizations as well as government agencies invest in spacecraft (S/C) technology programs that are aimed at increasing the performance of communications satellites. The value of these programs must be measured in terms of their impacts on the financial performane of the business ventures that may ultimately utilize the communications satellites. An economic evaluation and planning capability was developed and used to assess the impact of NASA on-orbit propulsion and space power programs on typical fixed satellite service (FSS) and direct broadcast service (DBS) communications satellite business ventures. Typical FSS and DBS spin and three-axis stabilized spacecraft were configured in the absence of NASA technology programs. These spacecraft were reconfigured taking into account the anticipated results of NASA specified on-orbit propulsion and space power programs. In general, the NASA technology programs resulted in spacecraft with increased capability. The developed methodology for assessing the value of spacecraft technology programs in terms of their impact on the financial performance of communication satellite business ventures is described. Results of the assessment of NASA specified on-orbit propulsion and space power technology programs are presented for typical FSS and DBS business ventures.

Strengthening expertise for health technology assessment and priority-setting in Africa

PubMed Central

Doherty, Jane E; Wilkinson, Thomas; Edoka, Ijeoma; Hofman, Karen

2017-01-01

ABSTRACT Background: Achieving sustainable universal health coverage depends partly on fair priority-setting processes that ensure countries spend scarce resources wisely. While general health economics capacity-strengthening initiatives exist in Africa, less attention has been paid to developing the capacity of individuals, institutions and networks to apply economic evaluation in support of health technology assessment and effective priority-setting. Objective: On the basis of international  lessons, to identify how research organisations and partnerships could contribute to capacity strengthening for health technology assessment and priority-setting in Africa. Methods: A rapid scan was conducted of international formal and grey literature and lessons extracted from the deliberations of two international and regional workshops relating to capacity-building for health technology assessment. ‘Capacity’ was defined in broad terms, including a conducive political environment, strong public institutional capacity to drive priority-setting, effective networking between experts, strong research organisations and skilled researchers. Results: Effective priority-setting requires more than high quality economic research. Researchers have to engage with an array of stakeholders, network closely other research organisations, build partnerships with different levels of government and train the future generation of researchers and policy-makers. In low- and middle-income countries where there are seldom government units or agencies dedicated to health technology assessment, they also have to support the development of an effective priority-setting process that is sensitive to societal and government needs and priorities. Conclusions: Research organisations have an important role to play in contributing to the development of health technology assessment and priority-setting capacity. In Africa, where there are resource and capacity challenges, effective partnerships between local and international researchers, and with key government stakeholders, can leverage existing skills and knowledge to generate a critical mass of individuals and institutions. These would help to meet the priority-setting needs of African countries and contribute to sustainable universal health coverage. PMID:29035166

How do we evaluate the cost of healthcare technology?

NASA Astrophysics Data System (ADS)

Nobel, Joel J.

1994-12-01

Five critical questions apply when evaluating the cost of healthcare technology: Who is asking the question (of how to evaluate healthcare costs)? For what purpose? What is the nature of the decision that must be made? At what state of a technology's development and diffusion are the questions being posed? What type of technology is stimulating the questions? A large number of organizations, both national and international, are engaged in technology assessment, and constructive disagreement improves the overall quality of those assessments. Current cost measurements tools such as cost-utility analysis, cost-benefit analysis, cost- effectiveness analysis, and outcomes research are weak and ineffective. Recently, pharmaceutical manufacturers have adopted more global cost-effectiveness studies. Technology assessments will ultimately focus on examining the relative cost-effectiveness of alternative technologies for a specific pathology or examining the relative cost-effectiveness of alternative technologies for a specific pathology or DRG. In addition to the traditional healthcare facility--hospital, outpatient facility, or group practice, group purchasing organizations are also asking about cost-effectiveness of healthcare. ECRI's SELECTTM process, unlike less effective technology assessments, takes into account real-world user experience data and life-cycle cost analysis in addition to detailed comparisons of technical features and performance.

Technology readiness levels and technology status for selected long term/high payoff technologies on the RLV program

NASA Technical Reports Server (NTRS)

Rosmait, Russell L.

1996-01-01

The development of a new space transportation system in a climate of constant budget cuts and staff reductions can be and is a difficult task. It is no secret that NASA's current launching system consumes a very large portion of NASA funding and requires a large army of people to operate & maintain the system. The new Reusable Launch Vehicle (RLV) project and it's programs are faced with a monumental task of making the cost of access to space dramatically lower and more efficient than NASA's current system. With pressures from congressional budget cutters and also increased competition and loss of market share from international agencies RLV's first priority is to develop a 'low-cost, reliable transportation to earth orbit.' One of the RLV's major focus in achieving low-cost, reliable transportation to earth orbit is to rely on the maturing of advanced technologies. The technologies for the RLV are numerous and varied. Trying to assess their current status, within the RLV development program is paramount. There are several ways to assess these technologies. One way is through the use of Technology Readiness Levels (TRL's). This project focused on establishing current (summer 95) 'worst case' TRL's for six selected technologies that are under consideration for use within the RLV program. The six technologies evaluated were Concurrent Engineering, Embedded Sensor Technology, Rapid Prototyping, Friction Stir Welding, Thermal Spray Coatings, and VPPA Welding.

77 FR 58112 - Notice of Intent To Prepare an Environmental Assessment (EA) for the Proposed Conveyance of Land...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-19

..., including warehousing and distribution; research and development; technology manufacturing; food processing... warehousing and distribution; research and development; technology manufacturing; food processing and... defense manufacturing, sensor manufacturing, or medical devices; (iv) Food/Agriculture--such as wine, food...

The validity of visual acuity assessment using mobile technology devices in the primary care setting.

PubMed

O'Neill, Samuel; McAndrew, Darryl J

2016-04-01

The assessment of visual acuity is indicated in a number of clinical circumstances. It is commonly conducted through the use of a Snellen wall chart. Mobile technology developments and adoption rates by clinicians may potentially provide more convenient methods of assessing visual acuity. Limited data exist on the validity of these devices and applications. The objective of this study was to evaluate the assessment of distance visual acuity using mobile technology devices against the commonly used 3-metre Snellen chart in a primary care setting. A prospective quantitative comparative study was conducted at a regional medical practice. The visual acuity of 60 participants was assessed on a Snellen wall chart and two mobile technology devices (iPhone, iPad). Visual acuity intervals were converted to logarithm of minimum angle of resolution (logMAR) scores and subjected to intraclass correlation coefficient (ICC) assessment. The results show a high level of general agreement between testing modality (ICC 0.917 with a 95% confidence interval of 0.887-0.940). The high level of agreement of visual acuity results between the Snellen wall chart and both mobile technology devices suggests that clinicians can use this technology with confidence in the primary care setting.

Responding to Industry Demands: Advanced Technology Centers.

ERIC Educational Resources Information Center

Smith, Elizabeth Brient

1991-01-01

Discusses characteristics identified by the Center for Occupational Research and Development as indicative of fully functioning advanced technology centers, including the provision of training and retraining in such areas as design, manufacturing, materials science, and electro-optics; technology transfer; demonstration sites; needs assessment;…

Developing a Pre-Engineering Curriculum for 3D Printing Skills for High School Technology Education

ERIC Educational Resources Information Center

Chien, Yu-Hung

2017-01-01

This study developed an integrated-STEM CO[subscript 2] dragster design course using 3D printing technology. After developing a pre-engineering curriculum, we conducted a teaching experiment to assess students' differences in creativity, race forecast accuracy, and learning performance. We compared student performance in both 3D printing and…

Energy Savings Potential and Research, Development, & Demonstration Opportunities for Commercial Building Heating, Ventilation, and Air Conditioning Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

none,

2011-09-01

This report covers an assessment of 182 different heating, ventilation, and air-conditioning (HVAC) technologies for U.S. commercial buildings to identify and provide analysis on 17 priority technology options in various stages of development. The analyses include an estimation of technical energy-savings potential, description of technical maturity, description of non-energy benefits, description of current barriers for market adoption, and description of the technology’s applicability to different building or HVAC equipment types. From these technology descriptions, are suggestions for potential research, development and demonstration (RD&D) initiatives that would support further development of the priority technology options.

Assessing Pre-Service Teacher Attitudes and Skills with the Technology Integration Confidence Scale

ERIC Educational Resources Information Center

Browne, Jeremy

2009-01-01

As technology integration continues to gain importance, preservice teachers must develop higher levels of confidence and proficiency in using technology in their classrooms (Kay, 2006). The acceptance of the National Educational Technology Standards for Teachers (NETS-T) by National Council for Accreditation of Teacher Education (NCATE) has…

Shedding Light on Students' Technology Preferences: Implications for Academic Development

ERIC Educational Resources Information Center

Mirriahi, Negin; Alonzo, Dennis

2015-01-01

This study built on previous research in 2010 to determine changes to students' current use of and expectations for future integration of technologies in their learning experience. The findings reveal a continued trend of conservative technology use amongst students but with a growing demand for more integration of technologies for assessment and…

Measuring the Influences That Affect Technological Literacy in Rhode Island High Schools

ERIC Educational Resources Information Center

Walach, Michael

2015-01-01

This study sampled the current state of technological literacy in Rhode Island high schools using a new instrument, the Technological Literacy Assessment, which was developed for this study. Gender inequalities in technological literacy were discovered, and possible causes and solutions are presented. This study suggests possible next steps for…

Integrated Flywheel Technology, 1983

NASA Technical Reports Server (NTRS)

Keckler, C. R. (Editor); Rodriguez, G. E. (Editor); Groom, N. J. (Editor)

1983-01-01

Topics of discussion included: technology assessment of the integrated flywheel systems, potential of system concepts, identification of critical areas needing development and, to scope and define an appropriate program for coordinated activity.

Impact Assessment and Forecasts of Information and Telecommunications Technologies Applied to Education and Training: Volume III--Annex & Glossary. Analysis of Key Issues for the Orientation of the Work of Sector Actors in the Framework of DELTA.

ERIC Educational Resources Information Center

Commission of the European Communities, Brussels (Belgium).

This annex to the main report, the third volume in a three volume set, is based on a study performed by the DELTA (Developing European Learning through Technological Advance) unit in parallel with the projects underway in the research and development Exploratory Action. It provides an assessment of the world situation in flexible and distance…

Economics of ion propulsion for large space systems

NASA Technical Reports Server (NTRS)

Masek, T. D.; Ward, J. W.; Rawlin, V. K.

1978-01-01

This study of advanced electrostatic ion thrusters for space propulsion was initiated to determine the suitability of the baseline 30-cm thruster for future missions and to identify other thruster concepts that would better satisfy mission requirements. The general scope of the study was to review mission requirements, select thruster designs to meet these requirements, assess the associated thruster technology requirements, and recommend short- and long-term technology directions that would support future thruster needs. Preliminary design concepts for several advanced thrusters were developed to assess the potential practical difficulties of a new design. This study produced useful general methodologies for assessing both planetary and earth orbit missions. For planetary missions, the assessment is in terms of payload performance as a function of propulsion system technology level. For earth orbit missions, the assessment is made on the basis of cost (cost sensitivity to propulsion system technology level).

Technology assessment: Some questions from a developing country perspective

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goonatilake, S.

1994-01-01

The emergence of technology assessment did not occur in a societal or value vacuum; neither did its practice. Today`s TA expertise is the outcome of historically located concerns, still unique to a particular narrow space ({open_quotes}Euro America{close_quotes}) and a narrow time frame (post-1960s). There are wide cultural, economic, societal and historical variations in the developing world as compared to the developed Western nations. This variation limits the usefulness of the simple transfer of concepts developed in the West. There are also many different potential stakeholders in developing countries. These also include those outside the formal sectors who variously define desirablemore » and undesirable aspects of the social and other factors of technology. This results in different cultural definitions of ethics, different visions of gender equality, different attitudes to the environment, different contents and values in local knowledge systems, and different social organizations associated with a given technology. An effective TA should recognize this multiplicity. It requires cognition, action, and debate on these key factors. At times this becomes an unavoidable developmental debate. 45 refs.« less

Joint Distributed Regional Training Capacity: A Scoping Study

DTIC Science & Technology

2007-12-01

use management mechanisms 4. Develop assessment tools to rapidly quantify temporary land-use dis- turbance risks . The development of such...the Army Environmental Requirements and Technology Assessments (AERTA) process to develop validated requirements upon which to base more focused...conducting a large environmental assessment study each time an exercise is planned is needlessly expensive and does not give the flexibility to

Technology Maturity for the Habitable-zone Exoplanet Imaging Mission (HabEx) Concept

NASA Astrophysics Data System (ADS)

Morgan, Rhonda; Warfield, Keith R.; Stahl, H. Philip; Mennesson, Bertrand; Nikzad, Shouleh; nissen, joel; Balasubramanian, Kunjithapatham; Krist, John; Mawet, Dimitri; Stapelfeldt, Karl; warwick, Steve

2018-01-01

HabEx Architecture A is a 4m unobscured telescope optimized for direct imaging and spectroscopy of potentially habitable exoplanets, and also enables a wide range of general astrophysics science. The exoplanet detection and characterization drives the enabling core technologies. A hybrid starlight suppression approach of a starshade and coronagraph diversifies technology maturation risk. In this poster we assess these exoplanet-driven technologies, including elements of coronagraphs, starshades, mirrors, jitter mitigation, wavefront control, and detectors. By utilizing high technology readiness solutions where feasible, and identifying required technology development that can begin early, HabEx will be well positioned for assessment by the community in 2020 Astrophysics Decadal Survey.

Methodology for the comparative assessment of the Satellite Power System (SPS) and alternative technologies

NASA Technical Reports Server (NTRS)

Wolsko, T.; Buehring, W.; Cirillo, R.; Gasper, J.; Habegger, L.; Hub, K.; Newsom, D.; Samsa, M.; Stenehjem, E.; Whitfield, R.

1980-01-01

The energy systems concerned are the satellite power system, several coal technologies, geothermal energy, fission, fusion, terrestrial solar systems, and ocean thermal energy conversion. Guidelines are suggested for the characterization of these systems, side-by-side analysis, alternative futures analysis, and integration and aggregation of data. A description of the methods for assessing the technical, economic, environmental, societal, and institutional issues surrounding the development of the selected energy technologies is presented.

Video performance for high security applications.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Connell, Jack C.; Norman, Bradley C.

2010-06-01

The complexity of physical protection systems has increased to address modern threats to national security and emerging commercial technologies. A key element of modern physical protection systems is the data presented to the human operator used for rapid determination of the cause of an alarm, whether false (e.g., caused by an animal, debris, etc.) or real (e.g., a human adversary). Alarm assessment, the human validation of a sensor alarm, primarily relies on imaging technologies and video systems. Developing measures of effectiveness (MOE) that drive the design or evaluation of a video system or technology becomes a challenge, given the subjectivitymore » of the application (e.g., alarm assessment). Sandia National Laboratories has conducted empirical analysis using field test data and mathematical models such as binomial distribution and Johnson target transfer functions to develop MOEs for video system technologies. Depending on the technology, the task of the security operator and the distance to the target, the Probability of Assessment (PAs) can be determined as a function of a variety of conditions or assumptions. PAs used as an MOE allows the systems engineer to conduct trade studies, make informed design decisions, or evaluate new higher-risk technologies. This paper outlines general video system design trade-offs, discusses ways video can be used to increase system performance and lists MOEs for video systems used in subjective applications such as alarm assessment.« less

Evaluation of Technologies to Prevent Precipitation During Water Recovery from Urine

NASA Technical Reports Server (NTRS)

Broyan, James L., Jr.; Pickering, Karen D.; Adam, Niklas M.; Mitchell, Julie L.; Anderson, Molly S.; Carter, Layne; Muirhead, Dean; Gazda, Daniel B.

2011-01-01

The International Space Station (ISS) Urine Processor Assembly (UPA) experienced a hardware failure in the Distillation Assembly (DA) in October 2010. Initially the UPA was operated to recover 85% of the water from urine through distillation, concentrating the contaminants in the remaining urine. The DA failed due to precipitation of calcium sulfate (gypsum) which caused a loss of UPA function. The ISS UPA operations have been modified to only recover 70% of the water minimizing gypsum precipitation risk but substantially increasing water resupply needs. This paper describes the feasibility assessment of several technologies (ion exchange, chelating agents, threshold inhibitors, and Lorentz devices) to prevent gypsum precipitation. The feasibility assessment includes the development of assessment methods, chemical modeling, bench top testing, and validation testing in a flight-like ground UPA unit. Ion exchange technology has been successfully demonstrated and has been recommended for further development. The incorporation of the selected technology will enable water recovery to be increased from 70% back to the original 85% and improve the ISS water balance.

Advanced propulsion for LEO-Moon transport. 3: Transportation model. M.S. Thesis - California Univ.

NASA Technical Reports Server (NTRS)

Henley, Mark W.

1992-01-01

A simplified computational model of low Earth orbit-Moon transportation system has been developed to provide insight into the benefits of new transportation technologies. A reference transportation infrastructure, based upon near-term technology developments, is used as a departure point for assessing other, more advanced alternatives. Comparison of the benefits of technology application, measured in terms of a mass payback ratio, suggests that several of the advanced technology alternatives could substantially improve the efficiency of low Earth orbit-Moon transportation.

Introducing new technologies into Space Station subsystems

NASA Technical Reports Server (NTRS)

Wiskerchen, Michael J.; Mollakarimi, Cindy L.

1989-01-01

A new systems engineering technology has been developed and applied to Shuttle processing. The new engineering approach emphasizes the identification, quantitative assessment, and management of system performance and risk related to the dynamic nature of requirements, technology, and operational concepts. The Space Shuttle Tile Automation System is described as an example of the first application of the new engineering technology. Lessons learned from the Shuttle processing experience are examined, and concepts are presented which are applicable to the design and development of the Space Station Freedom.

Current mHealth Technologies for Physical Activity Assessment and Promotion

PubMed Central

O’Reilly, Gillian A.; Spruijt-Metz, Donna

2014-01-01

Context Novel mobile assessment and intervention capabilities are changing the face of physical activity (PA) research. A comprehensive systematic review of how mobile technology has been used for measuring PA and promoting PA behavior change is needed. Evidence acquisition Article collection was conducted using six databases from February to June 2012 with search terms related to mobile technology and PA. Articles that described the use of mobile technologies for PA assessment, sedentary behavior assessment, and/or interventions for PA behavior change were included. Articles were screened for inclusion and study information was extracted. Evidence synthesis Analyses were conducted from June to September 2012. Mobile phone–based journals and questionnaires, short message service (SMS) prompts, and on-body PA sensing systems were the mobile technologies most utilized. Results indicate that mobile journals and questionnaires are effective PA self-report measurement tools. Intervention studies that reported successful promotion of PA behavior change employed SMS communication, mobile journaling, or both SMS and mobile journaling. Conclusions mHealth technologies are increasingly being employed to assess and intervene on PA in clinical, epidemiologic, and intervention research. The wide variations in technologies used and outcomes measured limit comparability across studies, and hamper identification of the most promising technologies. Further, the pace of technologic advancement currently outstrips that of scientific inquiry. New adaptive, sequential research designs that take advantage of ongoing technology development are needed. At the same time, scientific norms must shift to accept “smart,” adaptive, iterative, evidence-based assessment and intervention technologies that will, by nature, improve during implementation. PMID:24050427

Current mHealth technologies for physical activity assessment and promotion.

PubMed

O'Reilly, Gillian A; Spruijt-Metz, Donna

2013-10-01

Novel mobile assessment and intervention capabilities are changing the face of physical activity (PA) research. A comprehensive systematic review of how mobile technology has been used for measuring PA and promoting PA behavior change is needed. Article collection was conducted using six databases from February to June 2012 with search terms related to mobile technology and PA. Articles that described the use of mobile technologies for PA assessment, sedentary behavior assessment, and/or interventions for PA behavior change were included. Articles were screened for inclusion and study information was extracted. Analyses were conducted from June to September 2012. Mobile phone-based journals and questionnaires, short message service (SMS) prompts, and on-body PA sensing systems were the mobile technologies most utilized. Results indicate that mobile journals and questionnaires are effective PA self-report measurement tools. Intervention studies that reported successful promotion of PA behavior change employed SMS communication, mobile journaling, or both SMS and mobile journaling. mHealth technologies are increasingly being employed to assess and intervene on PA in clinical, epidemiologic, and intervention research. The wide variations in technologies used and outcomes measured limit comparability across studies, and hamper identification of the most promising technologies. Further, the pace of technologic advancement currently outstrips that of scientific inquiry. New adaptive, sequential research designs that take advantage of ongoing technology development are needed. At the same time, scientific norms must shift to accept "smart," adaptive, iterative, evidence-based assessment and intervention technologies that will, by nature, improve during implementation. © 2013 American Journal of Preventive Medicine.

Systems Engineering Applied to the Development of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L.; Costello, Ronan Patrick

A motivation for undertaking this stakeholder requirements analysis and Systems Engineering exercise is to document the requirements for successful wave energy farms to facilitate better design and better design assessments. A difficulty in wave energy technology development is the absence to date of a verifiable minimum viable product against which the merits of new products might be measured. A consequence of this absence is that technology development progress, technology value, and technology funding have largely been measured, associated with, and driven by technology readiness, measured in technology readiness levels (TRLs). Originating primarily from the space and defense industries, TRLs focusmore » on procedural implementation of technology developments of large and complex engineering projects, where cost is neither mission critical nor a key design driver. The key deficiency with the TRL approach in the context of wave energy conversion is that WEC technology development has been too focused on commercial readiness and not enough on the stakeholder requirements and particularly economic viability required for market entry.« less

Integration of problem-based learning and innovative technology into a self-care course.

PubMed

McFalls, Marsha

2013-08-12

To assess the integration of problem-based learning and technology into a self-care course. Problem-based learning (PBL) activities were developed and implemented in place of lectures in a self-care course. Students used technology, such as computer-generated virtual patients and iPads, during the PBL sessions. Students' scores on post-case quizzes were higher than on pre-case quizzes used to assess baseline knowledge. Student satisfaction with problem-based learning and the use of technology in the course remained consistent throughout the semester. Integrating problem-based learning and technology into a self-care course enabled students to become active learners.

OfftargetFinder: a web tool for species-specific RNAi design.

PubMed

Good, R T; Varghese, T; Golz, J F; Russell, D A; Papanicolaou, A; Edwards, O; Robin, C

2016-04-15

RNA interference (RNAi) technology is being developed as a weapon for pest insect control. To maximize the specificity that such an approach affords we have developed a bioinformatic web tool that searches the ever-growing arthropod transcriptome databases so that pest-specific RNAi sequences can be identified. This will help technology developers finesse the design of RNAi sequences and suggests which non-target species should be assessed in the risk assessment process. http://rnai.specifly.org crobin@unimelb.edu.au. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Health technology assessment in the Philippines.

PubMed

De Rosas-Valera, Madeleine

2009-07-01

The aim of this study was to discuss the development of health technology assessment (HTA) in the Philippines. A new national health insurance program began to be implemented in the Philippines in 1995 after passage of the Health Insurance Act. The program is known as the Philippine Health Insurance Corporation (PhilHealth). HTA was introduced to the Philippines in 1998. PhilHealth began to develop an HTA program subsequently. As a developing country struggling to provide comprehensive health care to all citizens, PhilHealth sees HTA as an essential part of assuring that only effective and cost-effective care is provided for the public sector.

The Full Costs of Ballistic Missile Defense

DTIC Science & Technology

2003-01-01

following words: “We assess that countries developing ballistic missiles would also develop various responses to US theater and national defenses. Russia...and China each have developed numerous countermeasures and probably are willing to sell the requisite technologies. • Many countries , such as North...penetration aids and countermeasures. • These countries could develop countermeasures based on these technologies by the time they flight test their missiles

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang*

PubMed Central

Fang, Bin; Wang, Guang-huo; Van den berg, Marrit; Roetter, Reimund

2005-01-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China’s Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This approach allows assessing the impact of technology on pollution, is forward looking, and can yield information on the potential of on-the-shelf technology and provide opportunities for technology development. The approach particularly suits newly developed rice technologies with large potential of reducing nitrogen pollution and for future rice and vegetables technologies. The results showed that substantial reductions in nitrogen pollution are feasible for both types of crops. PMID:16187411

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang.

PubMed

Fang, Bin; Wang, Guang-Huo; Van, Den Berg Marrit; Roetter, Reimund

2005-10-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China's Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This approach allows assessing the impact of technology on pollution, is forward looking, and can yield information on the potential of on-the-shelf technology and provide opportunities for technology development. The approach particularly suits newly developed rice technologies with large potential of reducing nitrogen pollution and for future rice and vegetables technologies. The results showed that substantial reductions in nitrogen pollution are feasible for both types of crops.

The planning cycle.

PubMed

Johnson, William

2005-01-01

Information technology planning can be described as a continuous cyclical process composed of three phases whose primary purpose is optimum allocation of scarce resources. In the assessment phase, planners assess user needs, environmental factors, business objectives, and IT infrastructure needs to develop IT projects that address needs in each of these areas. A major goal of this phase is to develop a broad IT inventory. The prioritization phase seeks to ensure optimum allocation of scarce resources by prioritizing ITprojects based on: Costs--total life cycle costs. Benefits--both quantitative and non-quantitative, including support for the organization's strategic business objectives. Risks--subjective assessments of technological and non-technological risks. Implementation requirements--time and personnel requirements to implement the system. The scheduling phase incorporates sequencing considerations, personnel availability, and budgetary constraints to produce an IT plan in which project priorities are adjusted to meet organizational realities.

Ethical evaluation model for technologies. the role of medical technology in the development of autonomy in diabetes patient.

PubMed

Damian, Simona; Necula, Roxana; Sandu, A; Iliescu, Maria Liliana; Ioan, Beatrice

2013-01-01

Romanian Government Decision (GD) No. 8/2012 amending and supplementing GD No. 144/2010 regarding the function and organization structures of the Ministry of Health defines health technology assessment (HTA) as "a systematic and multidisciplinary analysis of the existing and new medical technologies, through which medical, economic, social, ethical and organizational information are synthesized so that medical technologies to be used in a transparent and unbiased manner". We propose an ethical assessment model of technologies used in the care of diabetic patients. The nature of this research was exploratory, giving the novelty of this approach to the clinical and social context of Romania. The assessment of health technologies used in the care of diabetic patients was based on the following research question: What is the role of health technology in developing autonomy and responsibility in patients suffering from chronic diseases? Individual interviews and focus groups were held from June, 2011 to November, 2012 in Iasi. The criterion for selecting the participants was belonging to the target groups: family doctors or diabetes specialist, patients with type 1 (TID) and type 2 diabetes (T2D), caregivers and other professionals involved in diabetes patient care. The diabetic patient benefits from a specific treatment and has the privilege of self-administering it, his life expectancy and quality of life depending upon the compliance and responsibility he demonstrates.

Enhancing Professional Writing Skills of Veterinary Technology Students: Linking Assessment and Clinical Practice in a Communications Course

ERIC Educational Resources Information Center

Clarke, Patricia; Schull, Daniel; Coleman, Glen; Pitt, Rachael; Manathunga, Catherine

2013-01-01

Veterinary technology is an emerging profession within the veterinary and allied animal health fields in Australia and affords graduates the opportunity to contribute to the small but growing body of literature within this discipline. This study describes the introduction of a contextualised assessment task to develop students' research…

An Assessment and Projection of Needed High Technology Training Programs in Colorado. Executive Summary.

ERIC Educational Resources Information Center

Ward, Mary; Wolff, Warren

A study determined labor market needs of high technology firms in Colorado. It assessed such needs in relation to present and projected output of vocational education and training programs and developed recommendations for policies and programs to meet industry training needs at the vocational training level. Data were collected through on-site…

High-power, ultralow-mass solar arrays: FY-77 solar arrays technology readiness assessment report, volume 2

NASA Technical Reports Server (NTRS)

Costogue, E. N.; Young, L. E.; Brandhorst, H. W., Jr.

1978-01-01

Development efforts are reported in detail for: (1) a lightweight solar array system for solar electric propulsion; (2) a high efficiency thin silicon solar cell; (3) conceptual design of 200 W/kg solar arrays; (4) fluorocarbon encapsulation for silicon solar cell array; and (5) technology assessment of concentrator solar arrays.

On-Line Support and Portfolio Assessment for NETS-T Standards In Pre-Service Programs at a Large Southeastern University.

ERIC Educational Resources Information Center

Shoffner, Mary B.; Dias, Laurie B.

This paper details the theoretical underpinnings of one university's approach to technology integration in its pre-service teacher preparation programs, and the results of a continuous, feedback-driven project to evaluate for technology integration through a student portfolio development process. Portfolios are assessed for multiple education and…

About the Cancer Biomarkers Research Group | Division of Cancer Prevention

Cancer.gov

The Cancer Biomarkers Research Group promotes research to identify, develop, and validate biological markers for early cancer detection and cancer risk assessment. Activities include development and validation of promising cancer biomarkers, collaborative databases and informatics systems, and new technologies or the refinement of existing technologies. NCI DCP News Note

Developing Anticipatory Life Cycle Assessment Tools to Support Responsible Innovation

NASA Astrophysics Data System (ADS)

Wender, Benjamin

Several prominent research strategy organizations recommend applying life cycle assessment (LCA) early in the development of emerging technologies. For example, the US Environmental Protection Agency, the National Research Council, the Department of Energy, and the National Nanotechnology Initiative identify the potential for LCA to inform research and development (R&D) of photovoltaics and products containing engineered nanomaterials (ENMs). In this capacity, application of LCA to emerging technologies may contribute to the growing movement for responsible research and innovation (RRI). However, existing LCA practices are largely retrospective and ill-suited to support the objectives of RRI. For example, barriers related to data availability, rapid technology change, and isolation of environmental from technical research inhibit application of LCA to developing technologies. This dissertation focuses on development of anticipatory LCA tools that incorporate elements of technology forecasting, provide robust explorations of uncertainty, and engage diverse innovation actors in overcoming retrospective approaches to environmental assessment and improvement of emerging technologies. Chapter one contextualizes current LCA practices within the growing literature articulating RRI and identifies the optimal place in the stage gate innovation model to apply LCA. Chapter one concludes with a call to develop anticipatory LCA---building on the theory of anticipatory governance---as a series of methodological improvements that seek to align LCA practices with the objectives of RRI. Chapter two provides a framework for anticipatory LCA, identifies where research from multiple disciplines informs LCA practice, and builds off the recommendations presented in the preceding chapter. Chapter two focuses on crystalline and thin film photovoltaics (PV) to illustrate the novel framework, in part because PV is an environmentally motivated technology undergoing extensive R&D efforts and rapid increases in scale of deployment. The chapter concludes with a series of research recommendations that seek to direct PV research agenda towards pathways with the greatest potential for environmental improvement. Similar to PV, engineered nanomaterials (ENMs) are an emerging technology with numerous potential applications, are the subject of active R&D efforts, and are characterized by high uncertainty regarding potential environmental implications. Chapter three introduces a Monte Carlo impact assessment tool based on the toxicity impact assessment model USEtox and demonstrates stochastic characterization factor (CF) development to prioritize risk research with the greatest potential to improve certainty in CFs. The case study explores a hypothetical decision in which personal care product developers are interested in replacing the conventional antioxidant niacinamide with the novel ENM C 60, but face high data uncertainty, are unsure regarding potential ecotoxicity impacts associated with this substitution, and do not know what future risk-relevant experiments to invest in that most efficiently improve certainty in the comparison. Results suggest experiments that elucidate C60 partitioning to suspended solids should be prioritized over parameters with little influence on results. This dissertation demonstrates a novel anticipatory approach to exploration of uncertainty in environmental models that can create new, actionable knowledge with potential to guide future research and development decisions.

EIA - Its Potential Application to Appropriate Technology in Developing Countries.

ERIC Educational Resources Information Center

Goode, Pamela M.; Johnstone, Alastair I.

1988-01-01

Provided is a definition of "appropriate technology." Describes some of the less apparent adverse effects of such technology on society and the environment. Stresses the need for environmental impact assessment of small-scale projects and the advantages and disadvantages of such practices. (CW)

Spaceborne synthetic aperture radar: Current status and future directions. A report to the Committee on Earth Sciences, Space Studies Board, National Research Council

NASA Technical Reports Server (NTRS)

Evans, D. L. (Editor); Apel, J.; Arvidson, R.; Bindschadler, R.; Carsey, F.; Dozier, J.; Jezek, K.; Kasischke, E.; Li, F.; Melack, J.

1995-01-01

This report provides a context in which questions put forth by NASA's Office of Mission to Planet Earth (OMPTE) regarding the next steps in spaceborne synthetic aperture radar (SAR) science and technology can be addressed. It summarizes the state-of-the-art in theory, experimental design, technology, data analysis, and utilization of SAR data for studies of the Earth, and describes potential new applications. The report is divided into five science chapters and a technology assessment. The chapters summarize the value of existing SAR data and currently planned SAR systems, and identify gaps in observational capabilities needing to be filled to address the scientific questions. Cases where SAR provides complementary data to other (non-SAR) measurement techniques are also described. The chapter on technology assessment outlines SAR technology development which is critical not only to NASA's providing societally relevant geophysical parameters but to maintaining competitiveness in SAR technology, and promoting economic development.

Component technology for stirling power converters

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.

1991-01-01

NASA Lewis Research Center has organized a component technology program as part of the efforts to develop Stirling converter technology for space power applications. The Stirling Space Power Program is part of the NASA High Capacity Power Project of the Civil Space Technology Initiative (CSTI). NASA Lewis is also providing technical management for the DOE/Sandia program to develop Stirling converters for solar terrestrial power producing electricity for the utility grid. The primary contractors for the space power and solar terrestrial programs develop component technologies directly related to their goals. This Lewis component technology effort, while coordinated with the main programs, aims at longer term issues, advanced technologies, and independent assessments. An overview of work on linear alternators, engine/alternator/load interactions and controls, heat exchangers, materials, life and reliability, and bearings is presented.

A Different Approach to Have Science and Technology Student-Teachers Gain Varied Methods in Laboratory Applications: A Sample of Computer Assisted POE Application

ERIC Educational Resources Information Center

Saka, Arzu

2012-01-01

The purpose of this study is to develop a new approach and assess the application for the science and technology student-teachers to gain varied laboratory methods in science and technology teaching. It is also aimed to describe the computer-assisted POE application in the subject of "Photosynthesis-Light" developed in the context of…

Managing Risk in Systems Development.

ERIC Educational Resources Information Center

DePaoli, Marilyn M.; And Others

Stanford University's use of a risk assessment methodology to improve the management of systems development projects is discussed. After examining the concepts of hazard, peril, and risk as they relate to the system development process, three ways to assess risk are covered: size, structure, and technology. The overall objective for Stanford…

MO-E-BRF-01: Research Opportunities in Technology for Innovation in Radiation Oncology (Highlight of ASTRO NCI 2013 Workshop)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn, S; Jaffray, D; Chetty, I

Radiotherapy is one of the most effective treatments for solid tumors, in large part due to significant technological advances associated with, for instance, the ability to target tumors to very high levels of accuracy (within millimeters). Technological advances have played a central role in the success of radiation therapy as an oncologic treatment option for patients. ASTRO, AAPM and NCI sponsored a workshop “Technology for Innovation in Radiation Oncology” at the NCI campus in Bethesda, MD on June 13–14, 2013. The purpose of this workshop was to bring together expert clinicians and scientists to discuss the role of disruptive technologiesmore » in radiation oncology, in particular with regard to how they are being developed and translated to clinical practice in the face of current and future challenges and opportunities. The technologies discussed encompassed imaging and delivery aspects, along with methods to enable/facilitate application of them in the clinic. Measures for assessment of the performance of these technologies, such as techniques to validate quantitative imaging, were reviewed. Novel delivery technologies, incorporating efficient and safe delivery mechanisms enabled by development of tools for process automation and the associated field of oncology informatics formed one of the central themes of the workshop. The discussion on disruptive technologies was grounded in the need for evidence of efficacy. Scientists in the areas of technology assessment and bioinformatics provided expert views on different approaches toward evaluation of technology efficacy. Clinicians well versed in clinical trials incorporating disruptive technologies (e.g. SBRT for early stage lung cancer) discussed the important role of these technologies in significantly improving local tumor control and survival for these cohorts of patients. Recommendations summary focused on the opportunities associated with translating the technologies into the clinic and assessing their efficacy, and provided a glimpse into the future. Learning Objectives: To understand the impact of technology on the field of radiation therapy To learn about the trends of technology development for the field of radiation oncology To understand the opportunities for in innovative technology research.« less

How should we assess the safety of IVF technologies?

PubMed

Brison, Daniel R; Roberts, Stephen A; Kimber, Susan J

2013-12-01

Clinical IVF treatment was established over 30 years ago through pioneering work by Edwards and Steptoe and other teams around the world and is now considered routine treatment. However, the pace of scientific and technological advances means that IVF practitioners can now access an increasing array of new and invasive technologies. The examples are many but include: extended embryo culture, development of media to include growth factors, developments in genetic screening, use of time-lapse technology and the advent of vitrification of embryos and oocytes. In parallel, wider scientific and medical advances are raising our awareness of the potential impact of assisted reproduction technology on areas such as embryonic development, gene expression and genomic imprinting and the developmental origins of health and disease. A recently suggested paradigm for assessing new technologies in IVF includes development in animal models such as rodents and large animals, preclinical research with human gametes and embryos donated to research, prospective clinical trials in IVF and, finally, follow-up studies of IVF children. In this paper, we describe efforts to address key areas of this pathway, namely preclinical research using human gametes/embryos and long-term, follow-up studies of the health of assisted reproduction children. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

Assessing Space Exploration Technology Requirements as a First Step Towards Ensuring Technology Readiness for International Cooperation in Space Exploration

NASA Technical Reports Server (NTRS)

Laurini, Kathleen C.; Hufenbach, Bernhard; Satoh, Maoki; Piedboeuf, Jean-Claude; Neumann, Benjamin

2010-01-01

Advancing critical and enhancing technologies is considered essential to enabling sustainable and affordable human space exploration. Critical technologies are those that enable a certain class of mission, such as technologies necessary for safe landing on the Martian surface, advanced propulsion, and closed loop life support. Others enhance the mission by leading to a greater satisfaction of mission objectives or increased probability of mission success. Advanced technologies are needed to reduce mass and cost. Many space agencies have studied exploration mission architectures and scenarios with the resulting lists of critical and enhancing technologies being very similar. With this in mind, and with the recognition that human space exploration will only be enabled by agencies working together to address these challenges, interested agencies participating in the International Space Exploration Coordination Group (ISECG) have agreed to perform a technology assessment as an important step in exploring cooperation opportunities for future exploration mission scenarios. "The Global Exploration Strategy: The Framework for Coordination" was developed by fourteen space agencies and released in May 2007. Since the fall of 2008, several International Space Exploration Coordination Group (ISECG) participating space agencies have been studying concepts for human exploration of the moon. They have identified technologies considered critical and enhancing of sustainable space exploration. Technologies such as in-situ resource utilization, advanced power generation/energy storage systems, reliable dust resistant mobility systems, and closed loop life support systems are important examples. Similarly, agencies such as NASA, ESA, and Russia have studied Mars exploration missions and identified critical technologies. They recognize that human and robotic precursor missions to destinations such as LEO, moon, and near earth objects provide opportunities to demonstrate the technologies needed for Mars mission. Agencies see the importance of assessing gaps and overlaps in their plans to advance technologies in order to leverage their investments and enable exciting missions as soon as practical. They see the importance of respecting the ability of any agency to invest in any technologies considered interesting or strategic. This paper will describe the importance of developing an appropriate international strategy for technology development and ideas for effective mechanisms for advancing an international strategy. This work will both inform and be informed by the development of an ISECG Global Exploration Roadmap and serve as a concrete step forward in advancing the Global Exploration Strategy.

Assessment and evaluation of technologies for environmental restoration. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uzochukwu, G.A.

1999-01-15

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be mademore » available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.« less

Assessment and evaluation of technologies for environmental restoration. Progress report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Uzochukwu, G. A.

2000-06-30

Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be mademore » available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.« less

Designing an Automated Assessment of Public Speaking Skills Using Multimodal Cues

ERIC Educational Resources Information Center

Chen, Lei; Feng, Gary; Leong, Chee Wee; Joe, Jilliam; Kitchen, Christopher; Lee, Chong Min

2016-01-01

Traditional assessments of public speaking skills rely on human scoring. We report an initial study on the development of an automated scoring model for public speaking performances using multimodal technologies. Task design, rubric development, and human rating were conducted according to standards in educational assessment. An initial corpus of…

Guidance on the Technology Performance Level (TPL) Assessment Methodology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem; Roberts, Jesse D.; Babarit, Aurelien

This document presents the revised Technology Performance Level (TPL) assessment methodology. There are three parts to this revised methodology 1) the Stakeholder Needs and Assessment Guidance (this document), 2) the Technical Submission form, 3) the TPL scoring spreadsheet. The TPL assessment is designed to give a technology neutral or agnostic assessment of any wave energy converter technology. The focus of the TPL is on the performance of the technology in meeting the customer’s needs. The original TPL is described in [1, 2] and those references also detail the critical differences in the nature of the TPL when compared to themore » more widely used technology readiness level (TRL). (Wave energy TRL is described in [3]). The revised TPL is particularly intended to be useful to investors and also to assist technology developers to conduct comprehensive assessments in a way that is meaningful and attractive to investors. The revised TPL assessment methodology has been derived through a structured Systems Engineering approach. This was a formal process which involved analyzing customer and stakeholder needs through the discipline of Systems Engineering. The results of the process confirmed the high level of completeness of the original methodology presented in [1] (as used in the Wave Energy Prize judging) and now add a significantly increased level of detail in the assessment and an improved more investment focused structure. The revised TPL also incorporates the feedback of the Wave Energy Prize judges.« less

Assessment and non-clinical impact of medical devices.

PubMed

Dervaux, Benoît; Szwarcensztein, Karine; Josseran, Anne; Barna, Alexandre; Carbonneil, Cédric; Chevrie, Karine; Debroucker, Frédérique; Grumblat, Anne; Grumel, Olivier; Massol, Jacques; Maugendre, Philippe; Méchin, Hubert; Orlikowski, David; Roussel, Christophe; Rumeau-Pichon, Catherine; Sales, Jean-Patrick; Vicaut, Eric

2015-01-01

Medical devices (MDs) cover a wide variety of products. They accompany changes in medical practice in step with technology innovations. Innovations in the field of MDs can improve the conditions of use of health technology and/or modify the organisation of care beyond the strict diagnostic or therapeutic benefit for the patients. However, these non purely clinical criteria seem to be only rarely documented or taken into account in the assessment of MDs during reimbursement decisions at national level or for formulary listing by hospitals even though multidimensional models for the assessment of health technologies have been developed that take into account the views of all stakeholders in the healthcare system In this article, after summarising the background concerning the assessment of health technologies in France, a definition of non-clinical criteria for the assessment of MDs is proposed and a decision tree for the assessment of MDs is described. Future lines of approach are proposed as a conclusion. © 2015 Société Française de Pharmacologie et de Thérapeutique.

Defining products for a new health technology assessment agency in Madrid, Spain: a survey of decision makers.

PubMed

Andradas, Elena; Blasco, Juan-Antonio; Valentín, Beatriz; López-Pedraza, María-José; Gracia, Francisco-Javier

2008-01-01

The aim of this study was to explore the needs and requirements of decision makers in our regional healthcare system for health technology assessment (HTA) products to support portfolio development planning for a new HTA agency in Madrid, Spain. A Delphi study was conducted during 2003. Questionnaires were developed based on a review of products and services offered by other agency members of the International Network of Agencies for Health Technology Assessment, and included preference and prioritization questions to evaluate twenty-two different products and services. The initial Delphi panel involved eighty-seven experts from twenty-one public hospitals, eleven primary healthcare centers, six private hospitals, and eight departments of the Regional Ministry of Health of the Community of Madrid. The global participation rate was 83.9 percent. Ten of the twenty-two possible products were rated of high interest by more than 80 percent of respondents. Important differences in preferences and priorities were detected across different settings. Public hospitals and primary healthcare centers shared a more "micro" perspective, preferring classic technology-centered HTA products, whereas private hospitals and Ministry representatives demanded more "macro" products and services such as organizational model and information system assessments. The high participation rate supports the representativeness of the results for our regional context. The strategic development of an HTA portfolio based on decision makers' needs and requirements as identified in this type of exercise should help achieve a better impact on policy development and decision making.

Research and Development Opportunities for Joining Technologies in HVAC&R

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goetzler, William; Guernsey, Matt; Young, Jim

The Building Technologies Office (BTO) works with researchers and industry partners to develop and deploy technologies that can substantially reduce energy consumption and greenhouse gas (GHG) emissions in residential and commercial buildings. This opportunity assessment aims to advance BTO’s energy savings, GHG reduction, and other program goals by identifying research and development (R&D) initiatives for joining technologies in heating, ventilation, air-conditioning, and refrigeration (HVAC&R) systems. Improving joining technologies for HVAC&R equipment has the potential to increase lifetime equipment operating efficiency, decrease equipment and project cost, and most importantly reduce hydroflourocarbon (HFC) refrigerant leakage to support HFC phasedown and GHG reductionmore » goals.« less

Developing a Critical Dialog for Educational Technology: Understanding the Nature of Technology and the Legacy of Scientific Management in Our Schools

ERIC Educational Resources Information Center

Frizelle, Thomas Kenneth

2012-01-01

This dissertation examines the legacy of scientific management and the dominance of one-dimensional thinking in the field of educational technology. Through this analysis, I demonstrate that the ways practitioners and policymakers frame educational technology, assess its effectiveness, and make judgments about its potential, often exclude…

Two Persons with Multiple Disabilities Use Camera-Based Microswitch Technology to Control Stimulation with Small Mouth and Eyelid Responses

ERIC Educational Resources Information Center

Lancioni, Giulio E.; Bellini, Domenico; Oliva, Doretta; Singh, Nirbhay N.; O'Reilly, Mark F.; Sigafoos, Jeff; Lang, Russell

2012-01-01

Background: A camera-based microswitch technology was recently developed to monitor small facial responses of persons with multiple disabilities and allow those responses to control environmental stimulation. This study assessed such a technology with 2 new participants using slight variations of previous responses. Method: The technology involved…

Speech systems research at Texas Instruments

NASA Technical Reports Server (NTRS)

Doddington, George R.

1977-01-01

An assessment of automatic speech processing technology is presented. Fundamental problems in the development and the deployment of automatic speech processing systems are defined and a technology forecast for speech systems is presented.

A technology assessment of alternative communications systems for the space exploration initiative

NASA Technical Reports Server (NTRS)

Ponchak, Denise S.; Zuzek, John E.; Whyte, Wayne A., Jr.; Spence, Rodney L.; Sohn, Philip Y.

1990-01-01

Telecommunications, Navigation, and Information Management (TNIM) services are vital to accomplish the ambitious goals of the Space Exploration Initiative (SEI). A technology assessment is provided for four alternative lunar and Mars operational TNIM systems based on detailed communications link analyses. The four alternative systems range from a minimum to a fully enhanced capability and use frequencies from S-band, through Ka-band, and up to optical wavelengths. Included are technology development schedules as they relate to present SEI mission architecture time frames.

Processes of technology assessment: The National Transportation Safety Board

NASA Technical Reports Server (NTRS)

Weiss, E.

1972-01-01

The functions and operations of the Safety Board as related to technology assessment are described, and a brief history of the Safety Board is given. Recommendations made for safety in all areas of transportation and the actions taken are listed. Although accident investigation is an important aspect of NTSB's activity, it is felt that the greatest contribution is in pressing for development of better accident prevention programs. Efforts of the Safety Board in changing transportation technology to improve safety and prevent accidents are illustrated.

Attitude Control Working Group report

NASA Technical Reports Server (NTRS)

Reid, Daniel F.; Studer, Phillip A.

1986-01-01

The goals were to establish the Attitude Control System (ACS) requirements, constraints, technology assessment, technology shortfalls, expected in the year 2000. These were based upon all missions, military and civil, for LEO and GEO. The critical ACS technology issues were identified and ACS programs developed to address these critical issues.

Creating Standards-Based Technology Education Facilities

ERIC Educational Resources Information Center

Daugherty, Michael K.; Klenke, Andrew M.; Neden, Michael

2008-01-01

One of the most intimidating tasks faced by new or practicing technology education teachers is the challenge of creating new facilities or renovating current facilities for a new purpose. While the fourth program standard in "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards (AETL)"…

A life cycle assessment and economic analysis of the Scum-to-Biodiesel technology in wastewater treatment plants.

PubMed

Mu, Dongyan; Addy, Min; Anderson, Erik; Chen, Paul; Ruan, Roger

2016-03-01

This study used life cycle assessment and technical economic analysis tools in evaluating a novel Scum-to-Biodiesel technology and compares the technology with scum digestion and combustion processes. The key variables that control environmental and economic performance are identified and discussed. The results show that all impacts examined for the Scum-to-Biodiesel technology are below zero indicating significant environmental benefits could be drawn from it. Of the three technologies examined, the Scum-to-Biodiesel technology has the best environmental performance in fossil fuel depletion, GHG emissions, and eutrophication, whereas combustion has the best performance on acidification. Of all process inputs assessed, process heat, glycerol, and methanol uses had the highest impacts, much more than any other inputs considered. The Scum-to-Biodiesel technology also makes higher revenue than other technologies. The diesel price is a key variable for its economic performance. The research demonstrates the feasibility and benefits in developing Scum-to-Biodiesel technology in wastewater treatment facilities. Copyright © 2015 Elsevier Ltd. All rights reserved.

Advanced Exploration Systems Atmosphere Resource Recovery and Environmental Monitoring

NASA Technical Reports Server (NTRS)

Perry, J.; Abney, M.; Conrad, R.; Garber, A.; Howard, D.; Kayatin, M.; Knox, J.; Newton, R.; Parrish, K.; Roman, M.;

Toward a new information infrastructure in health technology assessment: communication, design, process, and results.

PubMed

Neikter, Susanna Allgurin; Rehnqvist, Nina; Rosén, Måns; Dahlgren, Helena

2009-12-01

The aim of this study was to facilitate effective internal and external communication of an international network and to explore how to support communication and work processes in health technology assessment (HTA). STRUCTURE AND METHODS: European network for Health Technology Assessment (EUnetHTA) connected sixty-four HTA Partner organizations from thirty-three countries. User needs in the different steps of the HTA process were the starting point for developing an information system. A step-wise, interdisciplinary, creative approach was used in developing practical tools. An Information Platform facilitated the exchange of scientific information between Partners and with external target groups. More than 200 virtual meetings were set up during the project using an e-meeting tool. A Clearinghouse prototype was developed with the intent to offering a single point of access to HTA relevant information. This evolved into a next step not planned from the outset: Developing a running HTA Information System including several Web-based tools to support communication and daily HTA processes. A communication strategy guided the communication effort, focusing on practical tools, creating added value, involving stakeholders, and avoiding duplication of effort. Modern technology enables a new information infrastructure for HTA. The potential of information and communication technology was used as a strategic tool. Several target groups were represented among the Partners, which supported collaboration and made it easier to identify user needs. A distinctive visual identity made it easier to gain and maintain visibility on a limited budget.

Pointing and control system enabling technology for future automated space missions

NASA Technical Reports Server (NTRS)

Dahlgren, J. B.

1978-01-01

Future automated space missions present challenging opportunities in the pointing-and-control technology disciplines. The enabling pointing-and-control system technologies for missions from 1985 to the year 2000 were identified and assessed. A generic mission set including Earth orbiter, planetary, and other missions which predominantly drive the pointing-and-control requirements was selected for detailed evaluation. Technology candidates identified were prioritized as planning options for future NASA-OAST advanced development programs. The primary technology thrusts in each candidate program were cited, and advanced development programs in pointing-and-control were recommended for the FY 80 to FY 87 period, based on these technology thrusts.

World Market Development and Consumer Acceptance of Irradiation Technology

PubMed Central

Maherani, Behnoush; Hossain, Farah; Criado, Paula; Ben-Fadhel, Yosra; Salmieri, Stephane; Lacroix, Monique

2016-01-01

Food irradiation is an efficient technology that can be used to ensure food safety by eliminating insects and pathogens to prolong the shelf life. The process could be applied to fresh or frozen products without affecting the nutritional value. Presently more than 60 countries have adopted the technology. However, the technology adaptation differs from one country to another and, in some cases, consumers’ misunderstanding and lack of acceptance may hinder the technology adaptation process. This review summarizes the development of irradiation treatment worldwide and consumer attitudes towards the introduction of this technology. Also, the wholesomeness, beneficial effects, and regulation of irradiation are assessed. PMID:28231173

Improving sustainability by technology assessment and systems analysis: the case of IWRM Indonesia

NASA Astrophysics Data System (ADS)

Nayono, S.; Lehmann, A.; Kopfmüller, J.; Lehn, H.

2016-09-01

To support the implementation of the IWRM-Indonesia process in a water scarce and sanitation poor region of Central Java (Indonesia), sustainability assessments of several technology options of water supply and sanitation were carried out based on the conceptual framework of the integrative sustainability concept of the German Helmholtz association. In the case of water supply, the assessment was based on the life-cycle analysis and life-cycle-costing approach. In the sanitation sector, the focus was set on developing an analytical tool to improve planning procedures in the area of investigation, which can be applied in general to developing and newly emerging countries. Because sanitation systems in particular can be regarded as socio-technical systems, their permanent operability is closely related to cultural or religious preferences which influence acceptability. Therefore, the design of the tool and the assessment of sanitation technologies took into account the views of relevant stakeholders. The key results of the analyses are presented in this article.

Personalized Exposure Assessment: Promising Approaches for Human Environmental Health Research

PubMed Central

Weis, Brenda K.; Balshaw, David; Barr, John R.; Brown, David; Ellisman, Mark; Lioy, Paul; Omenn, Gilbert; Potter, John D.; Smith, Martyn T.; Sohn, Lydia; Suk, William A.; Sumner, Susan; Swenberg, James; Walt, David R.; Watkins, Simon; Thompson, Claudia; Wilson, Samuel H.

2005-01-01

New technologies and methods for assessing human exposure to chemicals, dietary and lifestyle factors, infectious agents, and other stressors provide an opportunity to extend the range of human health investigations and advance our understanding of the relationship between environmental exposure and disease. An ad hoc Committee on Environmental Exposure Technology Development was convened to identify new technologies and methods for deriving personalized exposure measurements for application to environmental health studies. The committee identified a “toolbox” of methods for measuring external (environmental) and internal (biologic) exposure and assessing human behaviors that influence the likelihood of exposure to environmental agents. The methods use environmental sensors, geographic information systems, biologic sensors, toxicogenomics, and body burden (biologic) measurements. We discuss each of the methods in relation to current use in human health research; specific gaps in the development, validation, and application of the methods are highlighted. We also present a conceptual framework for moving these technologies into use and acceptance by the scientific community. The framework focuses on understanding complex human diseases using an integrated approach to exposure assessment to define particular exposure–disease relationships and the interaction of genetic and environmental factors in disease occurrence. Improved methods for exposure assessment will result in better means of monitoring and targeting intervention and prevention programs. PMID:16002370

Wastewater Treatment and Reuse Treatment Technology Evaluation and Development

EPA Science Inventory

This project will assess the effectiveness of a Biomass Concentrator Reactor (BCR) to remove endocrine disrupting chemicals (EDCs) from wastewater. This technology could provide an alternative to traditional wastewater treatment methods.

A novel modification of the Turing test for artificial intelligence and robotics in healthcare.

PubMed

Ashrafian, Hutan; Darzi, Ara; Athanasiou, Thanos

2015-03-01

The increasing demands of delivering higher quality global healthcare has resulted in a corresponding expansion in the development of computer-based and robotic healthcare tools that rely on artificially intelligent technologies. The Turing test was designed to assess artificial intelligence (AI) in computer technology. It remains an important qualitative tool for testing the next generation of medical diagnostics and medical robotics. Development of quantifiable diagnostic accuracy meta-analytical evaluative techniques for the Turing test paradigm. Modification of the Turing test to offer quantifiable diagnostic precision and statistical effect-size robustness in the assessment of AI for computer-based and robotic healthcare technologies. Modification of the Turing test to offer robust diagnostic scores for AI can contribute to enhancing and refining the next generation of digital diagnostic technologies and healthcare robotics. Copyright © 2014 John Wiley & Sons, Ltd.

Reducing Risk in DoD Software-Intensive Systems Development

DTIC Science & Technology

2016-03-01

intensive systems development risk. This research addresses the use of the Technical Readiness Assessment (TRA) using the nine-level software Technology...The software TRLs are ineffective in reducing technical risk for the software component development. • Without the software TRLs, there is no...effective method to perform software TRA or reduce the technical development risk. The software component will behave as a new, untried technology in nearly

The proliferation of aerospace weapons technology: Ballistic missiles and the case of Brazil

NASA Astrophysics Data System (ADS)

Vossen, Terrence John

1993-04-01

The rationale behind the development of ballistic missile production in Brazil is examined by exploring the political, military, and economic determinants of ballistic missile demand in that country. To ascertain how Brazil developed missile production capabilities, the contributions of aerospace industries in industrialized states, the Brazilian space program, trade between less-developed countries, and illicit trade in missile technology are assessed. It is argued that missile development increasingly became a function of economic as opposed to security considerations, and that technologies transferred from developed country aerospace firms and Brazil's space program were primarily responsible for the creation of production capabilities. It is also contended that the proliferation of missile technology to Brazil was consistent with the workings of a system evident in the aerospace weapons technology market that sustains the horizontal spread of weapons production capabilities.

Environmental Development Plan (EDP). Enhanced gas recovery, FY 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-03-01

This Enhanced Gcs Recovery EDP addresses the environmental impacts of enhanced gas recovery processes in shale and sandstone, methane drainage from coalbeds, and methane recovery from geopressured aquifers. The EDP addresses planning in two basic areas: environmental research and environmental assessment. Environmental research can be categorized as follows: characterization of pollutants from EGR processes; selective application of monitoring and measuring techniques; evaluation of control/mitigation techniques; and evaluation of the synergistic impacts of the development of EGR techniques. Environmental assessment activities scheduled by EDP include: assessment of ecological impacts; assessment of socioeconomic effects; EIA/EIS preparation; evaluation of control technology needs; andmore » analysis of applicable and proposed emission, effluent, and health and safety standards. The EGR EDP includes an EGR technology overview (Section 2), a discussion of EGR environmental issues and requirements (Section 3), an environmental action plan (Section 4), an environmental management strategy for the EGR program (Section 5), and supporting appendices which present information on Federal legislation applicable to EGR technology, a summary of ongoing and completed research, and future research and assessment projects.« less

Turkish Teachers' and Students' Perceptions towards Computer Assisted Testing in Comparison with Spanish Teachers' and Students' Perceptions

ERIC Educational Resources Information Center

Berber, Aslihan; García Laborda, Jesús

2015-01-01

There are different opinions about using technology in the assessment field of education regarding computer-assisted assessments. People have some concerns such as its application, reliability and so on. It seems that those concerns may decrease with the developing technology in the following years since computer-based testing programs are…

Development of an Antimicrobial Stewardship-based Infectious Diseases Elective that Incorporates Human Patient Simulation Technology

PubMed Central

Meyer, Susan M.

2014-01-01

Objective. To design an elective for pharmacy students that facilitates antimicrobial stewardship awareness, knowledge, and skill development by solving clinical cases, using human patient simulation technology. Design. The elective was designed for PharmD students to describe principles and functions of stewardship programs, select, evaluate, refine, or redesign patient-specific plans for infectious diseases in the context of antimicrobial stewardship, and propose criteria and stewardship management strategies for an antimicrobial class at a health care institution. Teaching methods included active learning and lectures. Cases of bacterial endocarditis and cryptococcal meningitis were developed that incorporated human patient simulation technology. Assessment. Forty-five pharmacy students completed an antimicrobial stewardship elective between 2010 and 2013. Outcomes were assessed using student perceptions of and performance on rubric-graded assignments. Conclusion. A PharmD elective using active learning, including novel cases conducted with human patient simulation technology, enabled outcomes consistent with those desired of pharmacists assisting in antimicrobial stewardship programs. PMID:25386016

Technology, the Columbus Effect, and the Third Revolution in Learning.

ERIC Educational Resources Information Center

Fletcher, J. D.

This work was performed under a task entitled "Development and Assessment of ADL Prototypes." This task is intended to promote collaboration by the Services and by other government and academic partners in developing technology-based instruction. It is an essential component of the Advanced Distributed Learning (ADL) initiative being undertaken by…

Teacher Professional Development for Technology Integration in a Primary School Learning Community

ERIC Educational Resources Information Center

Liu, Shih-Hsiung

2013-01-01

Teacher professional development (TPD) can benefit teachers in classrooms. This study contributes to an understanding of TPD processes where there is sufficient technology integration through teacher participation in a school-based community. It assesses the effectiveness of TPD and its potential problems. Qualitative research methods are used to…

Links to the Future: The Role of Information and Telecommunications Technology in Appalachian Economic Development.

ERIC Educational Resources Information Center

Oden, Michael; Strover, Sharon

This report documents the status of information, computing, and telecommunications (ICT) technologies in the Appalachian region, assessing their potential relationship to economic growth and the federal, state, and local policies that influence their development. Key findings include the following. Leading producers of ICT products and services…

Got risk? risk-centric perspective for spacecraft technology decision-making

NASA Technical Reports Server (NTRS)

Feather, Martin S.; Cornford, Steven L.; Moran, Kelly

2004-01-01

A risk-based decision-making methodology conceived and developed at JPL and NASA has been used to aid in decision making for spacecraft technology assessment, adoption, development and operation. It takes a risk-centric perspective, through which risks are used as a reasoning step to interpose between mission objectives and risk mitigation measures.

European network for health technology assessment, EUnetHTA: planning, development, and implementation of a sustainable European network for health technology assessment.

PubMed

Kristensen, Finn Børlum; Mäkelä, Marjukka; Neikter, Susanna Allgurin; Rehnqvist, Nina; Håheim, Lise Lund; Mørland, Berit; Milne, Ruairidh; Nielsen, Camilla Palmhøj; Busse, Reinhard; Lee-Robin, Sun Hae; Wild, Claudia; Espallargues, Mireia; Chamova, Julia

2009-12-01

The European network on Health Technology Assessment (EUnetHTA) aimed to produce tangible and practical results to be used in the various phases of health technology assessment and to establish a framework and processes to support this. This article presents the background, objectives, and organization of EUnetHTA, which involved a total of sixty-four partner organizations. Establishing an effective and sustainable structure for a transnational network involved many managerial, policy, and methodological tools, according to the objective of each task or Work Package. Transparency in organization, financial transactions, and decision making was a key principle in the management of the Project as was the commitment to appropriately involve stakeholders. EUnetHTA activities resulted in a clear management and governance structure, efficient partnership, and transnational cooperation. The Project developed a model for sustainable continuation of the EUnetHTA Collaboration. The EUnetHTA Project achieved its goals by producing a suite of practical tools, a strong network, and plans for continuing the work in a sustainable EUnetHTA Collaboration that facilitates and promotes the use of HTA at national and regional levels. Responsiveness to political developments in Europe should be balanced with maintaining a high level of ambition to promote independent, evidence-based information and well-tested tools for best practice based on a strong network of HTA institutions.

Catching up: The rise of the Chinese wind turbine industry

NASA Astrophysics Data System (ADS)

Lefevre-Marton, Nicolas

This thesis argues that Chinese firms can catch up with the technological frontier in the scope of new climate friendly energy technologies and provides a detailed study of the case of wind power. Chapter 2 assesses the nature and extent of wind turbine technology catch-up. Firstly, it uses various wind turbine technology indicators to detail the convergence of trends of leading Chinese firms with firms at the technological frontier. Secondly, the chapter assesses the evolution of technological capabilities among leading Chinese turbine manufacturers. It shows that Chinese firms were progressively introducing turbine technologies similar to those produced by frontier firms and had rapidly improved their capabilities, allowing them to increasingly rely on independent technology development efforts. Chapter 3 describes how the Chinese wind power technology development system, characterized by the presence of a powerful and proactive government, provided the necessary conditions for Chinese wind turbine manufacturers to make rapid technological progress. In particular, it highlights the policies introduced by the government to create a large and rapidly growing wind power market in China and the steps taken by the government to ensure that Chinese firms entered and progressively dominated the domestic turbine manufacturing market. The competition which ensued among domestic turbine manufacturers was arguably the main driver of technology development efforts. The most significant challenge to the continued progress of the industry was whether the Chinese system could transition from a model of technology development based on technology transfer to one based on its own innovation efforts. Chapter 4 shows that due to limited government support over the years in both Europe and the United States, the wind power technology frontier has evolved relatively slowly, making it easier for Chinese firms to catch up. Firstly, using patenting rates as indicators of knowledge development, the chapter shows a strong correlation between changes in government wind power support policies and patenting activity. Secondly, using both technology penetration rates and patenting trends, the chapter shows that the evolution of the wind power frontier was slow compared to most other technology sectors globally.

The costs of introducing new technologies into space systems

NASA Technical Reports Server (NTRS)

Dodson, E. N.; Partma, H.; Ruhland, W.

1992-01-01

A review is conducted of cost-research studies intended to provide guidelines for cost estimates of integrating new technologies into existing satellite systems. Quantitative methods are described for determining the technological state-of-the-art so that proposed programs can be evaluated accurately in terms of their contribution to technological development. The R&D costs associated with the proposed programs are then assessed with attention given to the technological advances. Also incorporated quantifiably are any reductions in the costs of production, operations, and support afforded by the advanced technologies. The proposed model is employed in relation to a satellite sizing and cost study in which a tradeoff between increased R&D costs and reduced production costs is examined. The technology/cost model provides a consistent yardstick for assessing the true relative economic impact of introducing novel techniques and technologies.

Impact of Future Cable Television Technology. Final Summary Report.

ERIC Educational Resources Information Center

Rensselaer Polytechnic Inst., Troy, NY. Telecommunications Research Center.

Technological alternatives in the evolution of present cable television systems into broadband communication networks (BCN) were assessed. Cost estimates were made for alternatives, and the impact of alternatives on BCN development was investigated. An historical study of cable television technology was made which related it to other…

ASSESSING UST CORRECTIVE ACTION TECHNOLOGIES: EARLY SCREENING OF CLEANUP TECHNOLOGIES FOR THE SATURATED ZONE

EPA Science Inventory

This manual assists the user in making a preliminary evaluation of the likely effectiveness of various remediation technologies in the event of a release of petroleum products into the saturated zone. he manual: 1) helps the user develop a conceptual understanding of site conditi...

Structures performance, benefit, cost-study

NASA Technical Reports Server (NTRS)

Woike, O. G.; Salemme, C.; Stearns, E.; Oritz, P.; Roberts, M. L.; Baughman, J. L.; Johnston, R. P.; Demel, H. F.; Stabrylla, R. G.; Coffinberry, G. A.

1981-01-01

New technology concepts and structural analysis development needs which could lead to improved life cycle cost for future high-bypass turbofans were studied. The NASA-GE energy efficient engine technology is used as a base to assess the concept benefits. Recommended programs are identified for attaining these generic structural and other beneficial technologies.

Educational Media and Technology Yearbook, 1993. Volume 19.

ERIC Educational Resources Information Center

Ely, Donald P., Ed.; Minor, Barbara B., Ed.

This yearbook is designed to provide media and instructional technology professionals with an up-to-date, single-source overview and assessment of the field of educational technology. It offers organized access to the hot topics, trends, issues, and advancements in the field, with comprehensive coverage of developments in theory, hardware,…

Building TPACK in Preservice Teachers through Explicit Course Design

ERIC Educational Resources Information Center

Harvey, Douglas M.; Caro, Ronald

2017-01-01

The authors of this study utilized the TPACK (Technological, Pedagogical, and Content Knowledge) framework in developing and assessing these skills within an advanced technology integration course for preservice teachers. The research contributes to the use of TPACK as a metric for measuring technology integration of pre-service teachers. Two…

Developing Technology Needs Assessments for Educational Programs: An Analysis of Eight Key Indicators

ERIC Educational Resources Information Center

O'Reilly, Erin N.

2016-01-01

As access to information and communication technology grows, educators have increasing opportunities to experiment with and to adapt both hardware and software to their current practice. Technology's integration, however, can vary widely between teachers within the same program for numerous reasons. Understanding the challenges practitioners face…

Assessing user acceptance towards automated and conventional sink use for hand decontamination using the technology acceptance model.

PubMed

Dawson, Carolyn H; Mackrill, Jamie B; Cain, Rebecca

2017-12-01

Hand hygiene (HH) prevents harmful contaminants spreading in settings including domestic, health care and food handling. Strategies to improve HH range from behavioural techniques through to automated sinks that ensure hand surface cleaning. This study aimed to assess user experience and acceptance towards a new automated sink, compared to a normal sink. An adapted version of the technology acceptance model (TAM) assessed each mode of handwashing. A within-subjects design enabled N = 46 participants to evaluate both sinks. Perceived Ease of Use and Satisfaction of Use were significantly lower for the automated sink, compared to the conventional sink (p < 0.005). Across the remaining TAM factors, there was no significant difference. Participants suggested design features including jet strength, water temperature and device affordance may improve HH technology. We provide recommendations for future HH technology development to contribute a positive user experience, relevant to technology developers, ergonomists and those involved in HH across all sectors. Practitioner Summary: The need to facilitate timely, effective hand hygiene to prevent illness has led to a rise in automated handwashing systems across different contexts. User acceptance is a key factor in system uptake. This paper applies the technology acceptance model as a means to explore and optimise the design of such systems.

Assessment of the usability of a digital learning technology prototype for monitoring intracranial pressure 1

PubMed Central

de Carvalho, Lilian Regina; Évora, Yolanda Dora Martinez; Zem-Mascarenhas, Silvia Helena

2016-01-01

ABSTRACT Objective: to assess the usability of a digital learning technology prototype as a new method for minimally invasive monitoring of intracranial pressure. Method: descriptive study using a quantitative approach on assessing the usability of a prototype based on Nielsen's ten heuristics. Four experts in the area of Human-Computer interaction participated in the study. Results: the evaluation delivered eight violated heuristics and 31 usability problems in the 32 screens of the prototype. Conclusion: the suggestions of the evaluators were critical for developing an intuitive, user-friendly interface and will be included in the final version of the digital learning technology. PMID:27579932

Web-Based Instruction and Learning: Analysis and Needs Assessment

NASA Technical Reports Server (NTRS)

Grabowski, Barbara; McCarthy, Marianne; Koszalka, Tiffany

1998-01-01

An analysis and needs assessment was conducted to identify kindergarten through grade 14 (K-14) customer needs with regard to using the World Wide Web (WWW) for instruction and to identify obstacles K-14 teachers face in utilizing NASA Learning Technologies products in the classroom. The needs assessment was conducted as part of the Dryden Learning Technologies Project which is a collaboration between Dryden Flight Research Center (DFRC), Edwards, California and Tne Pennsylvania State University (PSU), University Park, Pennsylvania. The overall project is a multiyear effort to conduct research in the development of teacher training and tools for Web-based science, mathematics and technology instruction and learning.

Review of NASA's(TradeMark) Exploration Technology Development Program

NASA Technical Reports Server (NTRS)

2008-01-01

To meet the objectives of the Vision for Space Exploration (VSE), NASA must develop a wide array of enabling technologies. For this purpose, NASA established the Exploration Technology Development Program (ETDP). Currently, ETDP has 22 projects underway. In the report accompanying the House-passed version of the FY2007 appropriations bill, the agency was directed to request from the NRC an independent assessment of the ETDP. This interim report provides an assessment of each of the 22 projects including a quality rating, an analysis of how effectively the research is being carried out, and the degree to which the research is aligned with the VSE. To the extent possible, the identification and discussion of various cross-cutting issues are also presented. Those issues will be explored and discussed in more detail in the final report.

Probabilistic Causal Analysis for System Safety Risk Assessments in Commercial Air Transport

NASA Technical Reports Server (NTRS)

Luxhoj, James T.

2003-01-01

Aviation is one of the critical modes of our national transportation system. As such, it is essential that new technologies be continually developed to ensure that a safe mode of transportation becomes even safer in the future. The NASA Aviation Safety Program (AvSP) is managing the development of new technologies and interventions aimed at reducing the fatal aviation accident rate by a factor of 5 by year 2007 and by a factor of 10 by year 2022. A portfolio assessment is currently being conducted to determine the projected impact that the new technologies and/or interventions may have on reducing aviation safety system risk. This paper reports on advanced risk analytics that combine the use of a human error taxonomy, probabilistic Bayesian Belief Networks, and case-based scenarios to assess a relative risk intensity metric. A sample case is used for illustrative purposes.

Forensic DNA phenotyping: Developing a model privacy impact assessment.

PubMed

Scudder, Nathan; McNevin, Dennis; Kelty, Sally F; Walsh, Simon J; Robertson, James

2018-05-01

Forensic scientists around the world are adopting new technology platforms capable of efficiently analysing a larger proportion of the human genome. Undertaking this analysis could provide significant operational benefits, particularly in giving investigators more information about the donor of genetic material, a particularly useful investigative lead. Such information could include predicting externally visible characteristics such as eye and hair colour, as well as biogeographical ancestry. This article looks at the adoption of this new technology from a privacy perspective, using this to inform and critique the application of a Privacy Impact Assessment to this emerging technology. Noting the benefits and limitations, the article develops a number of themes that would influence a model Privacy Impact Assessment as a contextual framework for forensic laboratories and law enforcement agencies considering implementing forensic DNA phenotyping for operational use. Copyright © 2018 Elsevier B.V. All rights reserved.

Measuring diet in the 21st century: use of new technologies.

PubMed

Cade, Janet E

2017-08-01

The advent of the internet and smartphone technology has allowed dietary assessment to reach the 21st century! The variety of foods available on the supermarket shelf is now greater than ever before. New approaches to measuring diet may help to reduce measurement error and advance our understanding of nutritional determinants of disease. This advance provides the potential to capture detailed dietary data on large numbers of individuals without the need for costly and time-consuming manual nutrition coding. This aim of the present paper is to review the need for new technologies to measure diet with an overview of tools available. The three main areas will be addressed: (1) development of web-based tools to measure diet; (2) use of smartphone apps to self-monitor diet; (3) improving the quality of dietary assessment through development of an online library of tools. A practical example of the development of a web-based tool to assess diet myfood24 (www.myfood24.org) will be given exploring its potential, limitations and challenges. The development of a new food composition database using back-of-pack information will be described. Smartphone apps used to measure diet with a focus on obesity will be reviewed. Many apps are unreliable in terms of tracking, and most are not evaluated. Accurate and consistent measurement of diet is needed for public health and epidemiology. The choice of the most appropriate dietary assessment method tends to rely on experience. The DIET@NET partnership has developed best practice guidelines for selection of dietary assessment tools, which aim to improve the quality, consistency and comparability of dietary data. These developments provide us with a step-change in our ability to reliably characterise food and nutrient intake in population studies. The need for high-quality, validated systems will be important to fully realise the benefits of new technologies.

Methodology Of PACS Effectiveness Evaluation As Part Of A Technology Assessment. The Dutch PACS Project Extrapolated.

NASA Astrophysics Data System (ADS)

Andriessen, J. H. T. H.; van der Horst-Bruinsma, I. E.; ter Haar Romeny, B. M.

1989-05-01

The present phase of the clinical evaluation within the Dutch PACS project mainly focuses on the development and evaluation of a PACSystem for a few departments in the Utrecht University hospital (UUH). A report on the first clinical experiences and a detailed cost/savings analysis of the PACSystem in the UUH are presented elsewhere. However, an assessment of the wider fmancial and organizational implications for hospitals and for the health sector is also needed. To this end a model for (financial) cost assessment of PACSystems is being developed by BAZIS. Learning from the actual pilot implementation in UUH we realized that general Technology Assessment (TA) also calls for an extra-polation of the medical and organizational effects. After a short excursion into the various approaches towards TA, this paper discusses the (inter) organizational dimensions relevant to the development of the necessary exttapolationmodels.

Assessment of Sensor Technologies for Advanced Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Korsah, Kofi; Ramuhalli, Pradeep; Vlim, R.

2016-10-01

Sensors and measurement technologies provide information on processes, support operations and provide indications of component health. They are therefore crucial to plant operations and to commercialization of advanced reactors (AdvRx). This report, developed by a three-laboratory team consisting of Argonne National Laboratory (ANL), Oak Ridge National Laboratory (ORNL) and Pacific Northwest National Laboratory (PNNL), provides an assessment of sensor technologies and a determination of measurement needs for AdvRx. It provides the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program and contributesmore » to the design and implementation of AdvRx concepts.« less

Computer technology forecast study for general aviation

NASA Technical Reports Server (NTRS)

Seacord, C. L.; Vaughn, D.

1976-01-01

A multi-year, multi-faceted program is underway to investigate and develop potential improvements in airframes, engines, and avionics for general aviation aircraft. The objective of this study was to assemble information that will allow the government to assess the trends in computer and computer/operator interface technology that may have application to general aviation in the 1980's and beyond. The current state of the art of computer hardware is assessed, technical developments in computer hardware are predicted, and nonaviation large volume users of computer hardware are identified.

Review of early assessment models of innovative medical technologies.

PubMed

Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

2017-08-01

Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Technology Transfer and the Civil Space Program. Volume 2: Workshop proceedings

NASA Technical Reports Server (NTRS)

1992-01-01

The objectives were to (1) provide a top-level review of the Integrated Technology Plan (ITP) and current civil space technology plans, including planning processes and technologies; (2) discuss and assess technology transfer (TT) experiences across a wide range of participants; (3) identify alternate categories/strategies for TT and define the objectives of transfer processes in each case; (4) identify the roles of various government 'stakeholders', aerospace industry, industries at large, and universities in civil space technology research, development, demonstration, and transfer; (5) identify potential barriers and/or opportunities to successful civil space TT; (6) identify specific needs for innovations in policy, programs, and/or procedures to facilitate TT; and (7) develop a plan of attack for the development of a workshop report. Papers from the workshop are presented.

Advancing automation and robotics technology for the Space Station Freedom and for the US economy

NASA Technical Reports Server (NTRS)

1990-01-01

The progress made by levels 1, 2, and 3 of the Office of Space Station in developing and applying advanced automation and robotics technology is described. Emphasis is placed upon the Space Station Freedom Program responses to specific recommendations made in the Advanced Technology Advisory Committee (ATAC) progress report 10, the flight telerobotic servicer, and the Advanced Development Program. Assessments are presented for these and other areas as they apply to the advancement of automation and robotics technology for the Space Station Freedom.

You can't eat moon rocks. [aerospace technology spinoffs assessment

NASA Technical Reports Server (NTRS)

Kubokawa, C. C.

1976-01-01

The effects produced by the aerospace program are investigated. The technology developed from aerospace-related research, development, and manufacturing has been made available to the public for its use through the NASA Technology Utilization Program. A description is presented of 'spinoffs' of NASA's aerospace programs which are used on a daily basis by the public. Attention is given to the liquid cooled garment technology, meal systems for the elderly, the zinc-rich coating, the emergency blanket, the flexible urethane foam Temper Foam, the 'Fog-Away Coating', and composite graphite equipment.

Methodology for assessing laser-based equipment

NASA Astrophysics Data System (ADS)

Pelegrina-Bonilla, Gabriel; Hermsdorf, Jörg; Thombansen, Ulrich; Abels, Peter; Kaierle, Stefan; Neumann, Jörg

2017-10-01

Methodologies for the assessment of technology's maturity are widely used in industry and research. Probably the best known are technology readiness levels (TRLs), initially pioneered by the National Aeronautics and Space Administration (NASA). At the beginning, only descriptively defined TRLs existed, but over time, automated assessment techniques in the form of questionnaires emerged in order to determine TRLs. Originally TRLs targeted equipment for space applications, but the demands on industrial relevant equipment are partly different in terms of, for example, overall costs, product quantities, or the presence of competitors. Therefore, we present a commonly valid assessment methodology with the aim of assessing laser-based equipment for industrial use, in general. The assessment is carried out with the help of a questionnaire, which allows for a user-friendly and easy accessible way to monitor the progress from the lab-proven state to the application-ready product throughout the complete development period. The assessment result is presented in a multidimensional metric in order to reveal the current specific strengths and weaknesses of the equipment development process, which can be used to direct the remaining development process of the equipment in the right direction.

Development and alumni assessment of an interdisciplinary PhD program offered through a blended learning environment.

PubMed

Goldberg, Debora Goetz; Clement, Dolores G; Cotter, J James

2011-01-01

There is a growing need for doctoral-prepared allied health professionals in health care practice, research, and teaching. This paper describes the development and evolution of the PhD Program in Health Related Sciences at Virginia Commonwealth University, which was designed to meet the demand for flexible learning environments by working allied health professionals. The program, now on its 14th year, offers interdisciplinary education in allied health fields through a blended learning environment that includes online and on-site education. An alumni assessment of the program was conducted in 2006 and 2008 to understand how well the program trained its graduates and how well the program responded to the needs of students. Six primary areas were reviewed: 1) extent to which program goals were achieved, 2) general skills and knowledge development for the student, 3) adequacy of the advising function of the program, 4) specific skill development for the student, 5) adequacy of instructional technology, and 6) impressions of the overall program. Findings from the alumni assessment led to changes in curriculum, enhanced use of distance education teaching, additional instructor training on distance-based multimedia technologies, and enhanced student-faculty interaction. Assessment of this program identified key areas, such as technology support, student-student interaction, and student-instructor interaction, which should be emphasized in the development or redesign of allied health educational programs offered in blended learning formats.

Site-Specific Rules for Risk Assessment.

ERIC Educational Resources Information Center

Tucker, William; And Others

1994-01-01

This article examines the development of regulatory guidance upon which the technology of risk assessment has matured into a decision-making method of choice. It examines in particular the role of site-specific risk assessment at Superfund sites. (LZ)

Advanced Reactor Technologies - Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne L.

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Advanced Reactor Technology -- Regulatory Technology Development Plan (RTDP)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne Leland

This DOE-NE Advanced Small Modular Reactor (AdvSMR) regulatory technology development plan (RTDP) will link critical DOE nuclear reactor technology development programs to important regulatory and policy-related issues likely to impact a “critical path” for establishing a viable commercial AdvSMR presence in the domestic energy market. Accordingly, the regulatory considerations that are set forth in the AdvSMR RTDP will not be limited to any one particular type or subset of advanced reactor technology(s) but rather broadly consider potential regulatory approaches and the licensing implications that accompany all DOE-sponsored research and technology development activity that deal with commercial non-light water reactors. However,more » it is also important to remember that certain “minimum” levels of design and safety approach knowledge concerning these technology(s) must be defined and available to an extent that supports appropriate pre-licensing regulatory analysis within the RTDP. Final resolution to advanced reactor licensing issues is most often predicated on the detailed design information and specific safety approach as documented in a facility license application and submitted for licensing review. Because the AdvSMR RTDP is focused on identifying and assessing the potential regulatory implications of DOE-sponsored reactor technology research very early in the pre-license application development phase, the information necessary to support a comprehensive regulatory analysis of a new reactor technology, and the resolution of resulting issues, will generally not be available. As such, the regulatory considerations documented in the RTDP should be considered an initial “first step” in the licensing process which will continue until a license is issued to build and operate the said nuclear facility. Because a facility license application relies heavily on the data and information generated by technology development studies, the anticipated regulatory importance of key DOE reactor research initiatives should be assessed early in the technology development process. Quality assurance requirements supportive of later licensing activities must also be attached to important research activities to ensure resulting data is usable in that context. Early regulatory analysis and licensing approach planning thus provides a significant benefit to the formulation of research plans and also enables the planning and development of a compatible AdvSMR licensing framework, should significant modification be required.« less

Improving automobile fuel economy: new standards, new approaches

DOT National Transportation Integrated Search

1991-12-01

This report examines the major issues associated with developing new fuel economy standards. It builds on work that the Office of Technology Assessment conducted for its report, "Energy Technology Choices: Shaping Our Future." 118p.

Technology scan for electronic toll collection.

DOT National Transportation Integrated Search

2008-06-01

The purpose of this project was to identify and assess available technologies and methodologies for electronic toll collection (ETC) and to develop recommendations for the best way(s) to implement toll collection in the Louisville metropolitan area. ...

Three-Dimensional Cell Cultures in Drug Discovery and Development

PubMed Central

Fang, Ye; Eglen, Richard M.

2017-01-01

The past decades have witnessed significant efforts toward the development of three-dimensional (3D) cell cultures as systems that better mimic in vivo physiology. Today, 3D cell cultures are emerging, not only as a new tool in early drug discovery but also as potential therapeutics to treat disease. In this review, we assess leading 3D cell culture technologies and their impact on drug discovery, including spheroids, organoids, scaffolds, hydrogels, organs-on-chips, and 3D bioprinting. We also discuss the implementation of these technologies in compound identification, screening, and development, ranging from disease modeling to assessment of efficacy and safety profiles. PMID:28520521

Telemonitoring with respect to Mood Disorders and Information and Communication Technologies: Overview and Presentation of the PSYCHE Project

PubMed Central

Javelot, Hervé; Spadazzi, Anne; Weiner, Luisa; Garcia, Sonia; Gentili, Claudio; Kosel, Markus; Bertschy, Gilles

2014-01-01

This paper reviews what we know about prediction in relation to mood disorders from the perspective of clinical, biological, and physiological markers. It then also presents how information and communication technologies have developed in the field of mood disorders, from the first steps, for example, the transition from paper and pencil to more sophisticated methods, to the development of ecological momentary assessment methods and, more recently, wearable systems. These recent developments have paved the way for the use of integrative approaches capable of assessing multiple variables. The PSYCHE project stands for Personalised monitoring SYstems for Care in mental HEalth. PMID:25050321

Telemonitoring with respect to mood disorders and information and communication technologies: overview and presentation of the PSYCHE project.

PubMed

Javelot, Hervé; Spadazzi, Anne; Weiner, Luisa; Garcia, Sonia; Gentili, Claudio; Kosel, Markus; Bertschy, Gilles

2014-01-01

This paper reviews what we know about prediction in relation to mood disorders from the perspective of clinical, biological, and physiological markers. It then also presents how information and communication technologies have developed in the field of mood disorders, from the first steps, for example, the transition from paper and pencil to more sophisticated methods, to the development of ecological momentary assessment methods and, more recently, wearable systems. These recent developments have paved the way for the use of integrative approaches capable of assessing multiple variables. The PSYCHE project stands for Personalised monitoring SYstems for Care in mental HEalth.

An Evaluation of Professional Development on Using Student Response Systems and Interactive Whiteboards for Formative Assessment in the Middle Schools of a Southeastern School District

ERIC Educational Resources Information Center

Fuller, Julia Susanne

2011-01-01

The purchase of 21st-century technologies for each middle school teacher in my school system coinciding with a historic lack of significant professional development in technology integration provided the impetus for the study. To address the problem, professional development focused on helping teachers use student response systems and mobile…

Assistive technologies to address capabilities of people with dementia: From research to practice.

PubMed

Kenigsberg, Paul-Ariel; Aquino, Jean-Pierre; Bérard, Alain; Brémond, François; Charras, Kevin; Dening, Tom; Droës, Rose-Marie; Gzil, Fabrice; Hicks, Ben; Innes, Anthea; Nguyen, Mai; Nygård, Louise; Pino, Maribel; Sacco, Guillaume; Salmon, Eric; van der Roest, Henriëtte; Villet, Hervé; Villez, Marion; Robert, Philippe; Manera, Valeria

2017-01-01

Assistive technologies became pervasive and virtually present in all our life domains. They can be either an enabler or an obstacle leading to social exclusion. The Fondation Médéric Alzheimer gathered international experts of dementia care, with backgrounds in biomedical, human and social sciences, to analyze how assistive technologies can address the capabilities of people with dementia, on the basis of their needs. Discussion covered the unmet needs of people with dementia, the domains of daily life activities where assistive technologies can provide help to people with dementia, the enabling and empowering impact of technology to improve their safety and wellbeing, barriers and limits of use, technology assessment, ethical and legal issues. The capability approach (possible freedom) appears particularly relevant in person-centered dementia care and technology development. The focus is not on the solution, rather on what the person can do with it: seeing dementia as disability, with technology as an enabler to promote capabilities of the person, provides a useful framework for both research and practice. This article summarizes how these concepts took momentum in professional practice and public policies in the past 15 years (2000-2015), discusses current issues in the design, development and economic model of assistive technologies for people with dementia, and covers how these technologies are being used and assessed.

Technology-driven dietary assessment: a software developer’s perspective

PubMed Central

Buday, Richard; Tapia, Ramsey; Maze, Gary R.

2015-01-01

Dietary researchers need new software to improve nutrition data collection and analysis, but creating information technology is difficult. Software development projects may be unsuccessful due to inadequate understanding of needs, management problems, technology barriers or legal hurdles. Cost overruns and schedule delays are common. Barriers facing scientific researchers developing software include workflow, cost, schedule, and team issues. Different methods of software development and the role that intellectual property rights play are discussed. A dietary researcher must carefully consider multiple issues to maximize the likelihood of success when creating new software. PMID:22591224

In-Space Propulsion: Connectivity to In-Space Fabrication and Repair

NASA Technical Reports Server (NTRS)

Johnson, L.; Harris, D.; Trausch, A.; Matloff, G. L.; Taylor, T.; Cutting, K.

2005-01-01

The connectivity between new in-space propulsion technologies and the ultimate development of an in-space fabrication and repair infrastructure are described in this Technical Memorandum. A number of advanced in-space propulsion technologies are being developed by NASA, many of which are directly relevant to the establishment of such an in-space infrastructure. These include aerocapture, advanced solar-electric propulsion, solar-thermal propulsion, advanced chemical propulsion, tethers, and solar photon sails. Other, further-term technologies have also been studied to assess their utility to the development of such an infrastructure.

Technology Investments in the NASA Entry Systems Modeling Project

NASA Technical Reports Server (NTRS)

Barnhardt, Michael; Wright, Michael; Hughes, Monica

2017-01-01

The Entry Systems Modeling (ESM) technology development project, initiated in 2012 under NASAs Game Changing Development (GCD) Program, is engaged in maturation of fundamental research developing aerosciences, materials, and integrated systems products for entry, descent, and landing(EDL)technologies [1]. To date, the ESM project has published over 200 papers in these areas, comprising the bulk of NASAs research program for EDL modeling. This presentation will provide an overview of the projects successes and challenges, and an assessment of future investments in EDL modeling and simulation relevant to NASAs mission

Use of Information and Communication Technologies in Sign Language Test Development: Results of an International Survey

ERIC Educational Resources Information Center

Haug, Tobias

2015-01-01

Sign language test development is a relatively new field within sign linguistics, motivated by the practical need for assessment instruments to evaluate language development in different groups of learners (L1, L2). Due to the lack of research on the structure and acquisition of many sign languages, developing an assessment instrument poses…

Definition of 1992 Technology Aircraft Noise Levels and the Methodology for Assessing Airplane Noise Impact of Component Noise Reduction Concepts

NASA Technical Reports Server (NTRS)

Kumasaka, Henry A.; Martinez, Michael M.; Weir, Donald S.

1996-01-01

This report describes the methodology for assessing the impact of component noise reduction on total airplane system noise. The methodology is intended to be applied to the results of individual study elements of the NASA-Advanced Subsonic Technology (AST) Noise Reduction Program, which will address the development of noise reduction concepts for specific components. Program progress will be assessed in terms of noise reduction achieved, relative to baseline levels representative of 1992 technology airplane/engine design and performance. In this report, the 1992 technology reference levels are defined for assessment models based on four airplane sizes - an average business jet and three commercial transports: a small twin, a medium sized twin, and a large quad. Study results indicate that component changes defined as program final goals for nacelle treatment and engine/airframe source noise reduction would achieve from 6-7 EPNdB reduction of total airplane noise at FAR 36 Stage 3 noise certification conditions for all of the airplane noise assessment models.

A Framework for Assessment of Aviation Safety Technology Portfolios

NASA Technical Reports Server (NTRS)

Jones, Sharon M.; Reveley, Mary S.

2014-01-01

The programs within NASA's Aeronautics Research Mission Directorate (ARMD) conduct research and development to improve the national air transportation system so that Americans can travel as safely as possible. NASA aviation safety systems analysis personnel support various levels of ARMD management in their fulfillment of system analysis and technology prioritization as defined in the agency's program and project requirements. This paper provides a framework for the assessment of aviation safety research and technology portfolios that includes metrics such as projected impact on current and future safety, technical development risk and implementation risk. The paper also contains methods for presenting portfolio analysis and aviation safety Bayesian Belief Network (BBN) output results to management using bubble charts and quantitative decision analysis techniques.

An Ethical Framework for Evaluating Experimental Technology.

PubMed

van de Poel, Ibo

2016-06-01

How are we to appraise new technological developments that may bring revolutionary social changes? Currently this is often done by trying to predict or anticipate social consequences and to use these as a basis for moral and regulatory appraisal. Such an approach can, however, not deal with the uncertainties and unknowns that are inherent in social changes induced by technological development. An alternative approach is proposed that conceives of the introduction of new technologies into society as a social experiment. An ethical framework for the acceptability of such experiments is developed based on the bioethical principles for experiments with human subjects: non-maleficence, beneficence, respect for autonomy, and justice. This provides a handle for the moral and regulatory assessment of new technologies and their impact on society.

Using Assessment to Improve Practice: New Developments and Measures.

ERIC Educational Resources Information Center

Geron, Scott Miyake; And Others

1997-01-01

Theme issue contains 18 articles on (1) clients' role in assessment of the elderly in long-term care; (2) choosing assessment measures (physical, cognitive, quality-of-life, well-being, social support, multidimensional, culturally appropriate); and (3) making assessments useful (including using technology, assessment by telephone, and clinical…

NASA'S information technology activities for the 90's

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Erickson, Dan

1991-01-01

The Office of Aeronautics, Exploration and Technology (OAET) is completing an extensive assessment of its nearly five hundred million dollars of proposed space technology development work. The budget is divided into four segments which are as follows: (1) the base research and technology program; (2) the Civil Space Technology Initiative (CSTI); (3) the Exploration Technology Program (ETP); and (4) the High Performance Computing Initiative (HPCI). The programs are briefly discussed in the context of Astrotech 21.

Evaluation of Usage of Information Diagnostic Technology in Family and General Medicine

PubMed Central

Sivic, Suad; Masic, Izet; Zunic, Lejla; Huseinagic, Senad

2010-01-01

Summary Introduction: In recent decades, the development and improvement of technology is rapidly advancing. The development of science, new materials, information technology, new procedures and other modern achievements were his first confirmation sought to improve living conditions, particularly in achieving better health conditions. In an effort to improve living conditions, solve the problem of severe diseases and to facilitate treatment, new technologies, almost always find its first application in medicine. In such conditions of general pressure of new modern technologies, health professionals often succumb to uncritically use these technologies. Methodology: Analyzing data collected from 30,000 research papers that have done 30 doctors of family medicine and 30 doctors of general medicine, and from interviews conducted with all 60 doctors who participated in the research. Results: a) Teams of family medicine have a significantly higher professional education, and it should be noted that there was no significant difference in length of service of employees; b) Teams of family medicine have significantly less committed population on which the care; c) Teams of family medicine in an average have fewer visits per day than the teams in general medicine; d) Information diagnostic technologies are more accessible to family medicine teams. Conclusion: It is necessary to introduce a technology assessment as a standard scientific methods in decision making and the creation of the health system. In fact, it is necessary to establish and enable institutions to assess health technologies and join the developed world in creating better health care. PMID:24493985

National Alliance for Advanced Biofuels and Bio-Products Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olivares, Jose A.; Baxter, Ivan; Brown, Judith

2014-09-30

The main objective of NAABB was to combine science, technology, and engineering expertise from across the nation to break down critical technical barriers to commercialization of algae-based biofuels. The approach was to address technology development across the entire value chain of algal biofuels production, from selection of strains to cultivation, harvesting, extraction, fuel conversion, and agricultural coproduct production. Sustainable practices and financial feasibility assessments ununderscored the approach and drove the technology development.

Advanced 3-V semiconductor technology assessment. [space communications

NASA Technical Reports Server (NTRS)

Nowogrodzki, M.

1983-01-01

Against a background of an extensive survey of the present state of the art in the field of III-V semiconductors for operation at microwave frequencies (or gigabit rate speeds), likely requirements of future space communications systems are identified, competing technologies and physical device limitations are discussed, and difficulties in implementing emerging technologies are projected. On the basis of these analyses, specific research and development programs required for the development of future systems components are recommended.

CAD/CAE-technologies application for assessment of passenger safety on railway transport in emergency

NASA Astrophysics Data System (ADS)

Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.

2018-03-01

A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.

Technology assessment of portable energy RDT and P

NASA Technical Reports Server (NTRS)

Vanston, J. H., Jr.; Frisbie, W. P.; Poston, D. L.

1975-01-01

Results are presented of a workshop conducted to assess portable energy technology. The results were evaluated and areas for future research were considered. Several research categories were studied: increasing presently available fuel supplies, developing new fuel sources, utilization of new transportation fuels, improving conservation practices, and equitable distribution of fuel supplies. Several research projects were proposed, and work statements were constructed for those considered suitable.

Formatively Assessing Teamwork in Technology-Enabled Twenty-First Century Classrooms: Exploratory Findings of a Teamwork Awareness Programme in Singapore

ERIC Educational Resources Information Center

Koh, Elizabeth; Hong, Helen; Tan, Jennifer Pei-Ling

2018-01-01

Teamwork, one of the core competencies for the twenty-first century learner, is a critical skill for work and learning. However, assessing teamwork is complex, in particular, developing a measure of teamwork that is domain-generic and applicable across a wide range of learners. This paper documents one such study that leverages technology to help…

Assessment of the high temperature fission chamber technology for the French fast reactor program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jammes, C.; Filliatre, P.; Geslot, B.

2011-07-01

High temperature fission chambers are key instruments for the control and protection of the sodium-cooled fast reactor. First, the developments of those neutron detectors, which are carried out either in France or abroad are reviewed. Second, the French realizations are assessed with the use of the technology readiness levels in order to identify tracks of improvement. (authors)

Assessment of the Cast Stone Low-Temperature Waste Form Technology Coupled with Technetium Removal - 14379

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Christopher F.; Rapko, Brian M.; Serne, R. Jeffrey

2014-03-03

The U.S. Department of Energy Office of Environmental Management (EM) is engaging the national laboratories to provide the scientific and technological rigor to support EM program and project planning, technology development and deployment, project execution, and assessment of program outcomes. As an early demonstration of this new responsibility, Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) were chartered to implement a science and technology program addressing low-temperature waste forms for immobilization of DOE aqueous waste streams, including technetium removal as an implementing technology. As a first step, the laboratories examined the technical risks and uncertainties associated withmore » the Cast Stone waste immobilization and technetium removal projects at Hanford. Science and technology gaps were identified for work associated with 1) conducting performance assessments and risk assessments of waste form and disposal system performance, and 2) technetium chemistry in tank wastes and separation of technetium from waste processing streams. Technical approaches to address the science and technology gaps were identified and an initial sequencing priority was suggested. A subset of research was initiated in 2013 to begin addressing the most significant science and technology gaps. The purpose of this paper is to report progress made towards closing these gaps and provide notable highlights of results achieved to date.« less

Risk Factor Assessment Branch (RFAB)

Cancer.gov

The Risk Factor Assessment Branch (RFAB) focuses on the development, evaluation, and dissemination of high-quality risk factor metrics, methods, tools, technologies, and resources for use across the cancer research continuum, and the assessment of cancer-related risk factors in the population.

Audiologic Assessment of Infants and Toddlers.

ERIC Educational Resources Information Center

Gravel, Judith S.

This paper provides guidelines for the audiologic assessment of infants and young children, highlighting recent technologic advances in auditory electrophysiology, acoustic immitance measure procedures, and behavioral audiometric techniques. First, audiologic assessment guidelines developed by the American Speech-Language-Hearing Association are…

Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weber, Jochem W.; Laird, Daniel

Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problemmore » solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).« less

Marginalization of end-use technologies in energy innovation for climate protection

NASA Astrophysics Data System (ADS)

Wilson, Charlie; Grubler, Arnulf; Gallagher, Kelly S.; Nemet, Gregory F.

2012-11-01

Mitigating climate change requires directed innovation efforts to develop and deploy energy technologies. Innovation activities are directed towards the outcome of climate protection by public institutions, policies and resources that in turn shape market behaviour. We analyse diverse indicators of activity throughout the innovation system to assess these efforts. We find efficient end-use technologies contribute large potential emission reductions and provide higher social returns on investment than energy-supply technologies. Yet public institutions, policies and financial resources pervasively privilege energy-supply technologies. Directed innovation efforts are strikingly misaligned with the needs of an emissions-constrained world. Significantly greater effort is needed to develop the full potential of efficient end-use technologies.

Report of the In Situ Resources Utilization Workshop

NASA Technical Reports Server (NTRS)

Fairchild, Kyle (Editor); Mendell, Wendell W. (Editor)

1988-01-01

The results of a workshop of 50 representatives from the public and private sector which investigated the potential joint development of the key technologies and mechanisms that will enable the permanent habitation of space are presented. The workshop is an initial step to develop a joint public/private assessment of new technology requirements of future space options, to share knowledge on required technologies that may exist in the private sector, and to investigate potential joint technology development opportunities. The majority of the material was produced in 5 working groups: (1) Construction, Assembly, Automation and Robotics; (2) Prospecting, Mining, and Surface Transportation; (3) Biosystems and Life Support; (4) Materials Processing; and (5) Innovative Ventures. In addition to the results of the working groups, preliminary technology development recommendations to assist in near-term development priority decisions are presented. Finally, steps are outlined for potential new future activities and relationships among the public, private, and academic sectors.

Integrated methodology for standard-setting norms of innovative product in the new competitive environment

NASA Astrophysics Data System (ADS)

Polyakova, Marina; Rubin, Gennadiy

2017-07-01

Modern theory of technological and economical development is based on long-term cycles. So far it has been proved that the technological structure of the economy can be subdivided into groups of technological complexes, which are inter-related with each other by similar technological links, so called technological modes. Technological mode is defined as a complex of interrelated production units of similar technological level, which develop simultaneously. In order to provide competitiveness of products in the new changing conditions, it is necessary to make sure that they meet all the regulatory requirements specified in standards. But the existing and the fast changing situation on the merchandise markets causes disbalance between the growing customer requirements and the technological capabilities of the manufacturer. This makes the issue of standardization development even more urgent both from the point of view of establishing the current positions and from the point of view of possible promising development trends in technology. In the paper scientific and engineering principles of developing standardization as a science are described. It is shown that further development of standardization is based on the principles of advanced standardization the main idea of which is to set up the prospective requirements to the innovative product. Modern approaches of advanced standardization are shown in this paper. The complexity of the negotiation procedure between customer and manufacturer as a whole and achieving of consensus, in particular, make it necessary to find conceptually new approaches to developing mathematical models. The developed methodology picture the process of achieving the consensus between customer and manufacturer while developing the standard norms in the form of decreasing S-curve diagram. It means that in the end of the negotiation process, there is no difference between customer and manufacturer positions. It makes it possible to provide the basics of the assessment using the differential equation of the relationship between the rate of change of quality assessment and the distance of the estimated parameter value from the best value to the worst one. The obtained mathematical model can be used in the practice of standardization decreasing time of setting standard norms.

Prioritizing investments in innovations to protect women from the leading causes of maternal death

PubMed Central

2014-01-01

PATH, an international nonprofit organization, assessed nearly 40 technologies for their potential to reduce maternal mortality from postpartum hemorrhage and preeclampsia and eclampsia in low-resource settings. The evaluation used a new Excel-based prioritization tool covering 22 criteria developed by PATH, the Maternal and Neonatal Directed Assessment of Technology (MANDATE) model, and consultations with experts. It identified five innovations with especially high potential: technologies to improve use of oxytocin, a uterine balloon tamponade, simplified dosing of magnesium sulfate, an improved proteinuria test, and better blood pressure measurement devices. Investments are needed to realize the potential of these technologies to reduce mortality. PMID:24405972

Prioritizing investments in innovations to protect women from the leading causes of maternal death.

PubMed

Herrick, Tara M; Harner-Jay, Claudia M; Levisay, Alice M; Coffey, Patricia S; Free, Michael J; LaBarre, Paul D

2014-01-09

PATH, an international nonprofit organization, assessed nearly 40 technologies for their potential to reduce maternal mortality from postpartum hemorrhage and preeclampsia and eclampsia in low-resource settings. The evaluation used a new Excel-based prioritization tool covering 22 criteria developed by PATH, the Maternal and Neonatal Directed Assessment of Technology (MANDATE) model, and consultations with experts. It identified five innovations with especially high potential: technologies to improve use of oxytocin, a uterine balloon tamponade, simplified dosing of magnesium sulfate, an improved proteinuria test, and better blood pressure measurement devices. Investments are needed to realize the potential of these technologies to reduce mortality.

LEAD SAFE YARDS: DEVELOPING AND IMPLEMENTING A MONITORING, ASSESSMENT, AND OUTREACH PROGRAM FOR YOUR COMMUNITY

EPA Science Inventory

The USEPA has developed a technology transfer handbook on how to plan and implement a residential soil lead monitoring, assessment, mitigation and outreach program for residential communities. The handbook provides guidance on 1) identifying potentially impacted communities, 2) c...

Sandia National Laboratories: National Security Missions: International

Science.gov Websites

Weapons Safety & Security Weapons Science & Technology Defense Systems & Assessments About Directed Research & Development Technology Deployment Centers Working With Sandia Working With Sandia Payable Contract Information Construction & Facilities Contract Audit Sandia's Economic Impact

Enhancing Visualization Skills-Improving Options and Success (EnViSIONS) of Engineering and Technology Students

ERIC Educational Resources Information Center

Veurink, N. L.; Hamlin, A. J.; Kampe; J. C. M.; Sorby, S. A.; Blasko, D. G.; Holliday-Darr, K. A.; Kremer, J. D. Trich; Harris, L. V. Abe; Connolly, P. E.; Sadowski, M. A.; Harris, K. S.; Brus, C. P.; Boyle, L. N.; Study, N. E.; Knott, T. W.

2009-01-01

Spatial visualization skills are vital to many careers and in particular to STEM fields. Materials have been developed at Michigan Technological University and Penn State Erie, The Behrend College to assess and develop spatial skills. The EnViSIONS (Enhancing Visualization Skills-Improving Options aNd Success) project is combining these materials…

Interactivity Technologies to Improve the Learning in Classrooms through the Cloud

ERIC Educational Resources Information Center

Fardoun, Habib M.; Alghazzawi, Daniyal M.; Paules, Antonio

2018-01-01

In this paper, the authors present a cloud system that incorporate tools developed in HTML5 and JQuery technologies, which are offered to professors and students in the development of a teaching methodology called flipped classroom, where the theoretical content is usually delivered by video files and self-assessment tools that students can…

Advances in gallium arsenide monolithic microwave integrated-circuit technology for space communications systems

NASA Technical Reports Server (NTRS)

Bhasin, K. B.; Connolly, D. J.

1986-01-01

Future communications satellites are likely to use gallium arsenide (GaAs) monolithic microwave integrated-circuit (MMIC) technology in most, if not all, communications payload subsystems. Multiple-scanning-beam antenna systems are expected to use GaAs MMIC's to increase functional capability, to reduce volume, weight, and cost, and to greatly improve system reliability. RF and IF matrix switch technology based on GaAs MMIC's is also being developed for these reasons. MMIC technology, including gigabit-rate GaAs digital integrated circuits, offers substantial advantages in power consumption and weight over silicon technologies for high-throughput, on-board baseband processor systems. In this paper, current developments in GaAs MMIC technology are described, and the status and prospects of the technology are assessed.

Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps

PubMed Central

Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

2016-01-01

Background Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. Objective The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Methods Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? Results General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app that utilizes specific Rwandan medical education resources. Based on our results, we propose a mobile medical education app that could provide many benefits such as rapid decision making with lower error rates, increasing the quality of data management and accessibility, and improving practice efficiency and knowledge. In areas where Internet access is limited, the proposed mobile medical education app would need to run on a mobile device without Internet access. Conclusions A user-centered design approach was adopted, starting with a needs assessment with representative end users, which provided recommendations for the development of a mobile medical education app specific to Rwanda. Specific app features were identified through the needs assessment and it was evident that there will be future benefits to ongoing incorporation of user-centered design methods to better inform the software development and improve its usability. Results of the user-centered design reported here can inform other medical education technology developments in LMIC to ensure that technologies developed are usable by all stakeholders. PMID:27731861

Enabling Access to Medical and Health Education in Rwanda Using Mobile Technology: Needs Assessment for the Development of Mobile Medical Educator Apps.

PubMed

Rusatira, Jean Christophe; Tomaszewski, Brian; Dusabejambo, Vincent; Ndayiragije, Vincent; Gonsalves, Snedden; Sawant, Aishwarya; Mumararungu, Angeline; Gasana, George; Amendezo, Etienne; Haake, Anne; Mutesa, Leon

2016-06-01

Lack of access to health and medical education resources for doctors in the developing world is a serious global health problem. In Rwanda, with a population of 11 million, there is only one medical school, hence a shortage in well-trained medical staff. The growth of interactive health technologies has played a role in the improvement of health care in developed countries and has offered alternative ways to offer continuous medical education while improving patient's care. However, low and middle-income countries (LMIC) like Rwanda have struggled to implement medical education technologies adapted to local settings in medical practice and continuing education. Developing a user-centered mobile computing approach for medical and health education programs has potential to bring continuous medical education to doctors in rural and urban areas of Rwanda and influence patient care outcomes. The aim of this study is to determine user requirements, currently available resources, and perspectives for potential medical education technologies in Rwanda. Information baseline and needs assessments data collection were conducted in all 44 district hospitals (DHs) throughout Rwanda. The research team collected qualitative data through interviews with 16 general practitioners working across Rwanda and 97 self-administered online questionnaires for rural areas. Data were collected and analyzed to address two key questions: (1) what are the currently available tools for the use of mobile-based technology for medical education in Rwanda, and (2) what are user's requirements for the creation of a mobile medical education technology in Rwanda? General practitioners from different hospitals highlighted that none of the available technologies avail local resources such as the Ministry of Health (MOH) clinical treatment guidelines. Considering the number of patients that doctors see in Rwanda, an average of 32 patients per day, there is need for a locally adapted mobile education app that utilizes specific Rwandan medical education resources. Based on our results, we propose a mobile medical education app that could provide many benefits such as rapid decision making with lower error rates, increasing the quality of data management and accessibility, and improving practice efficiency and knowledge. In areas where Internet access is limited, the proposed mobile medical education app would need to run on a mobile device without Internet access. A user-centered design approach was adopted, starting with a needs assessment with representative end users, which provided recommendations for the development of a mobile medical education app specific to Rwanda. Specific app features were identified through the needs assessment and it was evident that there will be future benefits to ongoing incorporation of user-centered design methods to better inform the software development and improve its usability. Results of the user-centered design reported here can inform other medical education technology developments in LMIC to ensure that technologies developed are usable by all stakeholders.

Evaluating the Implementation Fidelity of Technology Immersion and Its Relationship with Student Achievement

ERIC Educational Resources Information Center

Shapley, Kelly S.; Sheehan, Daniel; Maloney, Catherine; Caranikas-Walker, Fanny

2010-01-01

In a pilot study of the Technology Immersion model, high-need middle schools were "immersed" in technology by providing a laptop for each student and teacher, wireless Internet access, curricular and assessment resources, professional development, and technical and pedagogical support. This article examines the fidelity of model…

A Study of Distance Learning Technology in Utah: A Statewide Overview.

ERIC Educational Resources Information Center

Chow, Stanley H. L.; And Others

This report was commissioned by the Utah State Office of Education (USOE) to provide USOE with information about the potential applications of distance learning technology in schools. The study includes: (1) a statewide assessment of instructional, staff development, and administrative needs which may be met by distance learning technology; and…

Adapting the Media and Technology Usage and Attitudes Scale to Turkish

ERIC Educational Resources Information Center

Özgür, Hasan

2016-01-01

Due to the requirement of a current, valid, and reliable assessment instrument for determining usage frequencies of technology-based media and the attitudes towards these, this study intends to determine the validity and reliability of the Media and Technology Usage and Attitudes Scale, developed by researchers from California State University,…

Projecting technological change

Treesearch

Kenneth E. Skog

2007-01-01

Improving efficiency in the use of both wood and nonwood inputs has characterized the US forest sector over the last 50 years. This chapter explores methods used to reflect this pattern of technological change and others in the Timber Assessment Projection System models. The development and use of three types of technology projection methods are explained: (1)...

Fundamental Technology Development for Gas-Turbine Engine Health Management

NASA Technical Reports Server (NTRS)

Mercer, Carolyn R.; Simon, Donald L.; Hunter, Gary W.; Arnold, Steven M.; Reveley, Mary S.; Anderson, Lynn M.

2007-01-01

Integrated vehicle health management technologies promise to dramatically improve the safety of commercial aircraft by reducing system and component failures as causal and contributing factors in aircraft accidents. To realize this promise, fundamental technology development is needed to produce reliable health management components. These components include diagnostic and prognostic algorithms, physics-based and data-driven lifing and failure models, sensors, and a sensor infrastructure including wireless communications, power scavenging, and electronics. In addition, system assessment methods are needed to effectively prioritize development efforts. Development work is needed throughout the vehicle, but particular challenges are presented by the hot, rotating environment of the propulsion system. This presentation describes current work in the field of health management technologies for propulsion systems for commercial aviation.

The contribution of health technology assessment, health needs assessment, and health impact assessment to the assessment and translation of technologies in the field of public health genomics.

PubMed

Rosenkötter, N; Vondeling, H; Blancquaert, I; Mekel, O C L; Kristensen, F B; Brand, A

2011-01-01

The European Union has named genomics as one of the promising research fields for the development of new health technologies. Major concerns with regard to these fields are, on the one hand, the rather slow and limited translation of new knowledge and, on the other hand, missing insights into the impact on public health and health care practice of those technologies that are actually introduced. This paper aims to give an overview of the major assessment instruments in public health [health technology assessment (HTA), health needs assessment (HNA) and health impact assessment (HIA)] which could contribute to the systematic translation and assessment of genomic health applications by focussing at population level and on public health policy making. It is shown to what extent HTA, HNA and HIA contribute to translational research by using the continuum of translational research (T1-T4) in genomic medicine as an analytic framework. The selected assessment methodologies predominantly cover 2 to 4 phases within the T1-T4 system. HTA delivers the most complete set of methodologies when assessing health applications. HNA can be used to prioritize areas where genomic health applications are needed or to identify infrastructural needs. HIA delivers information on the impact of technologies in a wider scope and promotes informed decision making. HTA, HNA and HIA provide a partly overlapping and partly unique set of methodologies and infrastructure for the translation and assessment of genomic health applications. They are broad in scope and go beyond the continuum of T1-T4 translational research regarding policy translation. Copyright © 2010 S. Karger AG, Basel.

Design definition study of a NASA/Navy lift/cruise fan technology V/STOL airplane: Risk assessment addendum to the final report

NASA Technical Reports Server (NTRS)

Zabinsky, J. M.; Burnham, R. W.; Flora, C. C.; Gotlieb, P.; Grande, D. L.; Gunnarson, D. W.; Howard, W. M.; Hunt, D.; Jakubowski, G. W.; Johnson, P. E.

1975-01-01

An assessment of risk, in terms of delivery delays, cost overrun, and performance achievement, associated with the V/STOL technology airplane is presented. The risk is discussed in terms of weight, structure, aerodynamics, propulsion, mechanical drive, and flight controls. The analysis ensures that risks associated with the design and development of the airplane will be eliminated in the course of the program and a useful technology airplane that meets the predicted cost, schedule, and performance can be produced.

Advanced Air Bag Technology Assessment

NASA Technical Reports Server (NTRS)

Phen, R. L.; Dowdy, M. W.; Ebbeler, D. H.; Kim. E.-H.; Moore, N. R.; VanZandt, T. R.

1998-01-01

As a result of the concern for the growing number of air-bag-induced injuries and fatalities, the administrators of the National Highway Traffic Safety Administration (NHTSA) and the National Aeronautics and Space Administration (NASA) agreed to a cooperative effort that "leverages NHTSA's expertise in motor vehicle safety restraint systems and biomechanics with NASAs position as one of the leaders in advanced technology development... to enable the state of air bag safety technology to advance at a faster pace..." They signed a NASA/NHTSA memorandum of understanding for NASA to "evaluate air bag to assess advanced air bag performance, establish the technological potential for improved technology (smart) air bag systems, and identify key expertise and technology within the agency (i.e., NASA) that can potentially contribute significantly to the improved effectiveness of air bags." NASA is committed to contributing to NHTSAs effort to: (1) understand and define critical parameters affecting air bag performance; (2) systematically assess air bag technology state of the art and its future potential; and (3) identify new concepts for air bag systems. The Jet Propulsion Laboratory (JPL) was selected by NASA to respond to the memorandum of understanding by conducting an advanced air bag technology assessment. JPL analyzed the nature of the need for occupant restraint, how air bags operate alone and with safety belts to provide restraint, and the potential hazards introduced by the technology. This analysis yielded a set of critical parameters for restraint systems. The researchers examined data on the performance of current air bag technology, and searched for and assessed how new technologies could reduce the hazards introduced by air bags while providing the restraint protection that is their primary purpose. The critical parameters which were derived are: (1) the crash severity; (2) the use of seat belts; (3) the physical characteristics of the occupants; (4) the proximity of the occupants to the airbag module; (5) the deployment time, which includes the time to sense the need for deployment, the inflator response parameters, the air bag response, and the reliability of the air bag. The requirements for an advanced air bag technology is discussed. These requirements includes that the system use information related to: (1) the crash severity; (2) the status of belt usage; (3) the occupant category; and (4) the proximity to the air bag to adjust air bag deployment. The parameters for the response of the air bag are: (1) deployment time; (2) inflator parameters; and (3) air bag response and reliability. The state of occupant protection advanced technology is reviewed. This review includes: the current safety restraint systems, and advanced technology characteristics. These characteristics are summarized in a table, which has information regarding the technology item, the potential, and an date of expected utilization. The use of technology and expertise at NASA centers is discussed. NASA expertise relating to sensors, computing, simulation, propellants, propulsion, inflatable systems, systems analysis and engineering is considered most useful. Specific NASA technology developments, which were included in the study are: (1) a capacitive detector; (2) stereoscopic vision system; (3) improved crash sensors; (4) the use of the acoustic signature of the crash to determine crash severity; and (5) the use of radar antenna for pre-crash sensing. Information relating to injury risk assessment is included, as is a summary of the areas of the technology which requires further development.

Initial Technology Assessment for the Large-Aperture UV-Optical-Infrared (LUVOIR) Mission Concept Study

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Feinberg, Lee; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Division's 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet/optical/infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for biosignatures via direct-imaging and spectroscopic characterization of habitable exoplanets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV/Optical/Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Initial Technology Assessment for the Large UV-Optical-Infrared (LUVOIR) Mission Concept Study

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Feinberg, Lee D.; France, Kevin; Rauscher, Bernard J.; Redding, David; Schiminovich, David

2016-01-01

The NASA Astrophysics Divisions 30-Year Roadmap prioritized a future large-aperture space telescope operating in the ultra-violet-optical-infrared wavelength regime. The Association of Universities for Research in Astronomy envisioned a similar observatory, the High Definition Space Telescope. And a multi-institution group also studied the Advanced Technology Large Aperture Space Telescope. In all three cases, a broad science case is outlined, combining general astrophysics with the search for bio-signatures via direct-imaging and spectroscopic characterization of habitable exo-planets. We present an initial technology assessment that enables such an observatory that is currently being studied for the 2020 Decadal Survey by the Large UV-Optical Infrared (LUVOIR) surveyor Science and Technology Definition Team. We present here the technology prioritization for the 2016 technology cycle and define the required technology capabilities and current state-of-the-art performance. Current, planned, and recommended technology development efforts are also reported.

Overview of technology modeling in the Remedial Action Assessment System (RAAS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, C.D.; Bagaasen, L.M.; Chan, T.C.

1994-08-01

There are numerous hazardous waste sites under the jurisdiction of the US Department of Energy (DOE). To assist the cleanup of these sites in a more consistent, timely, and cost-effective manner, the Remedial Action Assessment System (RAAS) is being developed by the Pacific Northwest Laboratory (PNL). RAAS is a software tool designed to automate the initial technology selection within the remedial investigation/feasibility study (RI/FS) process. The software does several things for the user: (1) provides information about available remedial technologies, (2) sorts possible technologies to recommend a list of technologies applicable to a given site, (3) points out technical issuesmore » that may prevent the implementation of a technology, and (4) provides an estimate of the effectiveness of a given technology at a particular site. Information from RAAS can be used to compare remediation options and guide selection of technologies for further study.« less

Development and efficiency assessment of process lubrication for hot forging

NASA Astrophysics Data System (ADS)

Kargin, S.; Artyukh, Viktor; Ignatovich, I.; Dikareva, Varvara

2017-10-01

The article considers innovative technologies in testing and production of process lubricants for hot bulk forging. There were developed new compositions of eco-friendly water-graphite process lubricants for hot extrusion and forging. New approaches to efficiency assessment of process lubricants are developed and described in the following article. Laboratory and field results are presented.

Titan probe technology assessment and technology development plan study

NASA Technical Reports Server (NTRS)

Castro, A. J.

1980-01-01

The need for technology advances to accomplish the Titan probe mission was determined by defining mission conditions and requirements and evaluating the technology impact on the baseline probe configuration. Mission characteristics found to be technology drivers include (1) ten years dormant life in space vacuum; (2) unknown surface conditions, various sample materials, and a surface temperature; and (3) mission constraints of the Saturn Orbiter Dual Probe mission regarding weight allocation. The following areas were identified for further development: surface sample acquisition system; battery powered system; nonmetallic materials; magnetic bubble memory devices, and the landing system. Preentry science, reliability, and weight reduction and redundancy must also be considered.

Advancing Measurement Science to Assess Monitoring, Diagnostics, and Prognostics for Manufacturing Robotics

PubMed Central

Qiao, Guixiu; Weiss, Brian A.

2016-01-01

Unexpected equipment downtime is a ‘pain point’ for manufacturers, especially in that this event usually translates to financial losses. To minimize this pain point, manufacturers are developing new health monitoring, diagnostic, prognostic, and maintenance (collectively known as prognostics and health management (PHM)) techniques to advance the state-of-the-art in their maintenance strategies. The manufacturing community has a wide-range of needs with respect to the advancement and integration of PHM technologies to enhance manufacturing robotic system capabilities. Numerous researchers, including personnel from the National Institute of Standards and Technology (NIST), have identified a broad landscape of barriers and challenges to advancing PHM technologies. One such challenge is the verification and validation of PHM technology through the development of performance metrics, test methods, reference datasets, and supporting tools. Besides documenting and presenting the research landscape, NIST personnel are actively researching PHM for robotics to promote the development of innovative sensing technology and prognostic decision algorithms and to produce a positional accuracy test method that emphasizes the identification of static and dynamic positional accuracy. The test method development will provide manufacturers with a methodology that will allow them to quickly assess the positional health of their robot systems along with supporting the verification and validation of PHM techniques for the robot system. PMID:28058172

Advancing Measurement Science to Assess Monitoring, Diagnostics, and Prognostics for Manufacturing Robotics.

PubMed

Qiao, Guixiu; Weiss, Brian A

2016-01-01

Unexpected equipment downtime is a 'pain point' for manufacturers, especially in that this event usually translates to financial losses. To minimize this pain point, manufacturers are developing new health monitoring, diagnostic, prognostic, and maintenance (collectively known as prognostics and health management (PHM)) techniques to advance the state-of-the-art in their maintenance strategies. The manufacturing community has a wide-range of needs with respect to the advancement and integration of PHM technologies to enhance manufacturing robotic system capabilities. Numerous researchers, including personnel from the National Institute of Standards and Technology (NIST), have identified a broad landscape of barriers and challenges to advancing PHM technologies. One such challenge is the verification and validation of PHM technology through the development of performance metrics, test methods, reference datasets, and supporting tools. Besides documenting and presenting the research landscape, NIST personnel are actively researching PHM for robotics to promote the development of innovative sensing technology and prognostic decision algorithms and to produce a positional accuracy test method that emphasizes the identification of static and dynamic positional accuracy. The test method development will provide manufacturers with a methodology that will allow them to quickly assess the positional health of their robot systems along with supporting the verification and validation of PHM techniques for the robot system.

Flattening filter-free accelerators: a report from the AAPM Therapy Emerging Technology Assessment Work Group.

PubMed

Xiao, Ying; Kry, Stephen F; Popple, Richard; Yorke, Ellen; Papanikolaou, Niko; Stathakis, Sotirios; Xia, Ping; Huq, Saiful; Bayouth, John; Galvin, James; Yin, Fang-Fang

2015-05-08

This report describes the current state of flattening filter-free (FFF) radiotherapy beams implemented on conventional linear accelerators, and is aimed primarily at practicing medical physicists. The Therapy Emerging Technology Assessment Work Group of the American Association of Physicists in Medicine (AAPM) formed a writing group to assess FFF technology. The published literature on FFF technology was reviewed, along with technical specifications provided by vendors. Based on this information, supplemented by the clinical experience of the group members, consensus guidelines and recommendations for implementation of FFF technology were developed. Areas in need of further investigation were identified. Removing the flattening filter increases beam intensity, especially near the central axis. Increased intensity reduces treatment time, especially for high-dose stereotactic radiotherapy/radiosurgery (SRT/SRS). Furthermore, removing the flattening filter reduces out-of-field dose and improves beam modeling accuracy. FFF beams are advantageous for small field (e.g., SRS) treatments and are appropriate for intensity-modulated radiotherapy (IMRT). For conventional 3D radiotherapy of large targets, FFF beams may be disadvantageous compared to flattened beams because of the heterogeneity of FFF beam across the target (unless modulation is employed). For any application, the nonflat beam characteristics and substantially higher dose rates require consideration during the commissioning and quality assurance processes relative to flattened beams, and the appropriate clinical use of the technology needs to be identified. Consideration also needs to be given to these unique characteristics when undertaking facility planning. Several areas still warrant further research and development. Recommendations pertinent to FFF technology, including acceptance testing, commissioning, quality assurance, radiation safety, and facility planning, are presented. Examples of clinical applications are provided. Several of the areas in which future research and development are needed are also indicated.

Troubled Partnership. An Assessment of U.S.-Japan Collaboration on the FS-X Fighter,

DTIC Science & Technology

1995-01-01

Technology Transfer and Flowback 32 Commercial Spinoffs to Japan Exaggerated 33 Emphasis on Technology Flowback from Japan Was Political...take part in the development of the FS-X, and en- sure flowback of Japanese technology to the United States. In return, Japan paid $60 million to LFWC...involved flowback and access to Japanese technology. The government agreements stipulated that Japan would provide all technology applied to the FS-X

Adaption of space station technology for lunar operations

NASA Technical Reports Server (NTRS)

Garvey, J. M.

1992-01-01

Space Station Freedom technology will have the potential for numerous applications in an early lunar base program. The benefits of utilizing station technology in such a fashion include reduced development and facility costs for lunar base systems, shorter schedules, and verification of such technology through space station experience. This paper presents an assessment of opportunities for using station technology in a lunar base program, particularly in the lander/ascent vehicles and surface modules.

Practical tools and methods for health technology assessment in Europe: structures, methodologies, and tools developed by the European Network for Health Technology Assessment, EUnetHTA.

PubMed

Kristensen, Finn Børlum; Lampe, Kristian; Chase, Deborah L; Lee-Robin, Sun Hae; Wild, Claudia; Moharra, Montse; Garrido, Marcial Velasco; Nielsen, Camilla Palmhøj; Røttingen, John-Arne; Neikter, Susanna Allgurin; Bistrup, Marie Louise

2009-12-01

This article presents an overview of the practical methods and tools to support transnational Health Technology Assessment (HTA) that were developed and pilot tested by the European network for HTA (EUnetHTA), which involved a total of sixty-four Partner organizations. The methods differ according to scope and purpose of each of the tools developed. They included, for example, literature reviews, surveys, Delphi and consensus methods, workshops, pilot tests, and internal/public consultation. Practical results include an HTA Core Model and a Handbook on the use of the model, two pilot examples of HTA core information, an HTA Adaptation Toolkit for taking existing reports into new settings, a book about HTA and health policy making in Europe, a newsletter providing structured information about emerging/new technologies, an interactive Web-based tool to share information about monitoring activities for emerging/new technologies, and a Handbook on HTA capacity building for Member States with limited institutionalization of HTA. The tools provide high-quality information and methodological frameworks for HTA that facilitate preparation of HTA documentation, and sharing of information in and across national or regional systems. The tools will be used and further tested by partners in the EUnetHTA Collaboration aiming to (i) help reduce unnecessary duplication of HTA activities, (ii) develop and promote good practice in HTA methods and processes, (iii) share what can be shared, (iv) facilitate local adaptation of HTA information, (v) improve the links between health policy and HTA.

1986 fuel cell seminar: Program and abstracts

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1986-10-01

Ninety nine brief papers are arranged under the following session headings: gas industry's 40 kw program, solid oxide fuel cell technology, phosphoric acid fuel cell technology, molten carbonate fuel cell technology, phosphoric acid fuel cell systems, power plants technology, fuel cell power plant designs, unconventional fuels, fuel cell application and economic assessments, and plans for commerical development. The papers are processed separately for the data base. (DLC)

Object/Shape Recognition Technology: An Assessment of the Feasibility of Implementation at Defense Logistics Agency Disposition Services

DTIC Science & Technology

2015-02-25

provide efficiency and effectively manufacture or inventory items. The industries that benefit from Cognex technology are automotive, food and beverage ...recognition tedmology, Tedmology Readiness Level, PAGES Cost Benefit Analysis, Tedmology Commercialization, Technology Transition 139 16. PRICE CODE 17...Technology Development & Transition Strategy Guidebook xvii UD Ultimate Disposal U.S. United States USAF United States Air Force xviii THIS

The Development and Validation of an Instrument for Assessing College Students' Perceptions of Faculty Knowledge in Technology-Supported Class Environments

ERIC Educational Resources Information Center

Shih, Ching-Lin; Chuang, Hsueh-Hua

2013-01-01

Research in the area of educational technology has argued that the technological pedagogical content knowledge of faculty is crucial to addressing the challenge of teaching in higher education in the digital age, which is characterized by the common use of instructional technology in college classrooms and the ubiquitous presence of computing on…

Nigerian Inservice Teachers' Self-Assessment in Core Technology Competences and Their Professional Development Needs in ICT

ERIC Educational Resources Information Center

Aduwa-Ogiegbaen, Sam E. O.

2009-01-01

It is no longer a question whether or not technology should be used in the classroom. The emphasis is ensuring that teachers use technology effectively to create new opportunities for students to learn and raise their achievement. The use of technology in the classroom requires teachers to be knowledgeable and competent in ICTs and to integrate…

Tools, courses, and learning pathways offered by the National Interagency Fuels, Fire, and Vegetation Technology Transfer

Treesearch

Eva K. Strand; Kathy H. Schon; Jeff Jones

2010-01-01

Technological advances in the area of fuel and wildland fire management have created a need for effective decision support tools and technology training. The National Interagency Fuels Committee and LANDFIRE have chartered a team to develop science-based learning tools for assessment of fire and fuels and to provide online training and technology transfer to help...

E-assessment of prior learning: a pilot study of interactive assessment of staff with no formal education who are working in Swedish elderly care

PubMed Central

2014-01-01

Background The current paper presents a pilot study of interactive assessment using information and communication technology (ICT) to evaluate the knowledge, skills and abilities of staff with no formal education who are working in Swedish elderly care. Methods Theoretical and practical assessment methods were developed and used with simulated patients and computer-based tests to identify strengths and areas for personal development among staff with no formal education. Results Of the 157 staff with no formal education, 87 began the practical and/or theoretical assessments, and 63 completed both assessments. Several of the staff passed the practical assessments, except the morning hygiene assessment, where several failed. Other areas for staff development, i.e. where several failed (>50%), were the theoretical assessment of the learning objectives: Health, Oral care, Ergonomics, hygiene, esthetic, environmental, Rehabilitation, Assistive technology, Basic healthcare and Laws and organization. None of the staff passed all assessments. Number of years working in elderly care and staff age were not statistically significantly related to the total score of grades on the various learning objectives. Conclusion The interactive assessments were useful in assessing staff members’ practical and theoretical knowledge, skills, and abilities and in identifying areas in need of development. It is important that personnel who lack formal qualifications be clearly identified and given a chance to develop their competence through training, both theoretical and practical. The interactive e-assessment approach analyzed in the present pilot study could serve as a starting point. PMID:24742168