Technology Implementation: Teacher Age, Experience, Self-Efficacy, and Professional Development as Related to Classroom Technology Integration

ERIC Educational Resources Information Center

Tweed, Stephanie

2013-01-01

The purpose of this quantitative study was to identify the combination of factors that pertain to the implementation of new technologies in the classroom. Specifically, the study was an analysis of the age of the teacher, years of teaching experience, quality of professional development, and teacher self-efficacy as defined by Bandura (1997) to…

Examining the Quality of Technology Implementation in STEM Classrooms: Demonstration of an Evaluative Framework

ERIC Educational Resources Information Center

Parker, Caroline E.; Stylinski, Cathlyn D.; Bonney, Christina R.; Schillaci, Rebecca; McAuliffe, Carla

2015-01-01

Technology applications aligned with science, technology, engineering, and math (STEM) workplace practices can engage students in real-world pursuits but also present dramatic challenges for classroom implementation. We examined the impact of teacher professional development focused on incorporating these workplace technologies in the classroom.…

The ATHENA optics development

NASA Astrophysics Data System (ADS)

Bavdaz, Marcos; Wille, Eric; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Barriere, Nicolas; Yanson, Alexei; Vacanti, Giuseppe; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heinz; Christensen, Finn; Della Monica Ferreira, Desiree; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis

2016-07-01

ATHENA (Advanced Telescope for High ENergy Astrophysics) is being studied by the European Space Agency (ESA) as the second large science mission, with a launch slot in 2028. System studies and technology preparation activities are on-going. The optics of the telescope is based on the modular Silicon Pore Optics (SPO), a novel X-ray optics technology significantly benefiting from spin-in from the semiconductor industry. Several technology development activities are being implemented by ESA in collaboration with European industry and institutions. The related programmatic background, technology development approach and the associated implementation planning are presented.

Nurse adoption of continuous patient monitoring on acute post-surgical units: managing technology implementation.

PubMed

Jeskey, Mary; Card, Elizabeth; Nelson, Donna; Mercaldo, Nathaniel D; Sanders, Neal; Higgins, Michael S; Shi, Yaping; Michaels, Damon; Miller, Anne

2011-10-01

To report an exploratory action-research process used during the implementation of continuous patient monitoring in acute post-surgical nursing units. Substantial US Federal funding has been committed to implementing new health care technology, but failure to manage implementation processes may limit successful adoption and the realisation of proposed benefits. Effective approaches for managing barriers to new technology implementation are needed. Continuous patient monitoring was implemented in three of 13 medical/surgical units. An exploratory action-feedback approach, using time-series nurse surveys, was used to identify barriers and develop and evaluate responses. Post-hoc interviews and document analysis were used to describe the change implementation process. Significant differences were identified in night- and dayshift nurses' perceptions of technology benefits. Research nurses' facilitated the change process by evolving 'clinical nurse implementation specialist' expertise. Health information technology (HIT)-related patient outcomes are mediated through nurses' acting on new information but HIT designed for critical care may not transfer to acute care settings. Exploratory action-feedback approaches can assist nurse managers in assessing and mitigating the real-world effects of HIT implementations. It is strongly recommended that nurse managers identify stakeholders and develop comprehensive plans for monitoring the effects of HIT in their units. © 2011 Blackwell Publishing Ltd.

The Relationship between Teachers' Perceptions about Job-Embedded Professional Development and Teacher Efficacy in Implementing Technology

ERIC Educational Resources Information Center

Cooper, Calvin H., Jr.

2014-01-01

Consistent with a recognized challenge across the United States, the local problem addressed in this study was teachers' inability to implement new technologies in the classroom. Professional development is the channel through which teachers improve, and high-quality professional development has been shown to enhance teacher efficacy. Professional…

Identification and assessment of site treatment plan implementation opportunities for emerging technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernard, E.A.

1995-12-31

The Department of Energy (DOE), in response to the 1992 Federal Facility Compliance Act, has prepared Site Treatment Plans (STP) for the approximately 2,000 waste streams identified within its mixed waste inventory Concurrently, emerging mixed waste treatment technologies are in final development. This paper defines a three-phase process to identify and assess implementation opportunities for these emerging technologies within the STP. It highlights the first phase, functional matching of expected treatment capabilities with proposed treatment requirements. Matches are based on treatment type, regulated contaminant and waste matrix type, for both capabilities and requirements. Results identify specific waste streams and volumesmore » that could be treated by each emerging technology. A study for Plasma Hearth Process, Delphi DETOX{sup sm}, Supercritical Water Oxidation and Vitrification shows that about 200,000 ml of DOE`s mixed waste inventory can potentially be treated by one or more of these emerging technologies. Actual implementations are small fractions of the treatable inventory. Differences between potential and actual implementations must be minimized to accrue optimum benefit from implementation of emerging or alternative treatment technologies. Functional matching is the first phase in identifying and quantifying benefits, addressing technology system and treatment issues, and providing, in part, the basis for STP implementation decisions. DOE, through EM`s Office of Technology Development, has funded this work.« less

Collaboration process for integrated social and health care strategy implementation.

PubMed

Korpela, Jukka; Elfvengren, Kalle; Kaarna, Tanja; Tepponen, Merja; Tuominen, Markku

2012-01-01

To present a collaboration process for creating a roadmap for the implementation of a strategy for integrated health and social care. The developed collaboration process includes multiple phases and uses electronic group decision support system technology (GDSS). A case study done in the South Karelia District of Social and Health Services in Finland during 2010-2011. An expert panel of 13 participants was used in the planning process of the strategy implementation. The participants were interviewed and observed during the case study. As a practical result, a roadmap for integrated health and social care strategy implementation has been developed. The strategic roadmap includes detailed plans of several projects which are needed for successful integration strategy implementation. As an academic result, a collaboration process to create such a roadmap has been developed. The collaboration process and technology seem to suit the planning process well. The participants of the meetings were satisfied with the collaboration process and the GDSS technology. The strategic roadmap was accepted by the participants, which indicates satisfaction with the developed process.

Implementing Computer Technologies: Teachers' Perceptions and Practices

ERIC Educational Resources Information Center

Wozney, Lori; Venkatesh, Vivek; Abrami, Philip

2006-01-01

This study investigates personal and setting characteristics, teacher attitudes, and current computer technology practices among 764 elementary and secondary teachers from both private and public school sectors in Quebec. Using expectancy-value theory, the Technology Implementation Questionnaire (TIQ) was developed; it consists of 33 belief items…

Information Technology Implementation and Sustainment Model: Data Collection Instrument

DTIC Science & Technology

2005-03-01

users (Wing and Bettinger , 2003). A GIS is a computerized system for spatial (geographically-referenced) data management (Davis and Schultz, 1990:3...AFIT/GEM/ENV/05M-15 Abstract The goal of this research was to develop a data collection instrument for an existing information technology...implementation and sustsinment model. In 2003, a unique system dynamics model was developed at the Air Force Institute of Technology to predict the

Does the early adopter catch the worm or choke on it? A reflective journey of the challenges of technology adoption in a health sciences education institution.

PubMed

Botha-Ravyse, Chrisna; Blignaut, Seugnet

2017-01-01

Early adoption of technology is a struggle well known to early adopters and now to me. Since the demand to use and implement technology in health professions' education has increased, I have been led to adopt various technologies, leading to many headaches. This paper addresses my experiences in developing and implementing technology in health science classrooms in a setting not adequately equipped to do so. After reflecting on my experiences, I conclude that it is crucial that systems help innovators and early adopters as they work to develop and implement teaching and learning technology. Technical decisions should address the needs of the higher education educator. In addition, once an institution chooses a specific technological approach, such as using e-guides, there should be resources in place to support the forerunners of these initiatives.

Factors related to the implementation and diffusion of new technologies: a pilot study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1979-06-01

In order to develop an understanding of how government intervention affects the processes of implementation and diffusion of new technologies, case studies of 14 technologies were carried out: automobiles; broadcast radio; frozen foods; black and white TV; color TV; polio vaccine; supersonic transport; fluoridation of water supplies; computer-aided instruction; basic oxygen process for steel; numerical control in manufacturing; digital computers; lasers; and integrated circuit. The key factors, their motivations for implementing/adopting the technology (or not doing so), the interactions among the key factors, and how these affected implementation/adoption are examined.

Developing and Implementing a Content Structure for Educational Television Programming in the Area of Career Education. Satellite Technology Demonstration, Technical Report No. 0506.

ERIC Educational Resources Information Center

Lonsdale, Helen C.; McWilliams, Alfred E., Jr.

The Program Component of the Satellite Technology Demonstration (STD) developed the programing for a television series on career planning for junior high school students. A program called "Time Out" was designed, developed, and implemented to be broadcast throughout the Rocky Mountain States. A staff of educators and communicators…

Technologies for space station autonomy

NASA Technical Reports Server (NTRS)

Staehle, R. L.

1984-01-01

This report presents an informal survey of experts in the field of spacecraft automation, with recommendations for which technologies should be given the greatest development attention for implementation on the initial 1990's NASA Space Station. The recommendations implemented an autonomy philosophy that was developed by the Concept Development Group's Autonomy Working Group during 1983. They were based on assessments of the technologies' likely maturity by 1987, and of their impact on recurring costs, non-recurring costs, and productivity. The three technology areas recommended for programmatic emphasis were: (1) artificial intelligence expert (knowledge based) systems and processors; (2) fault tolerant computing; and (3) high order (procedure oriented) computer languages. This report also describes other elements required for Station autonomy, including technologies for later implementation, system evolvability, and management attitudes and goals. The cost impact of various technologies is treated qualitatively, and some cases in which both the recurring and nonrecurring costs might be reduced while the crew productivity is increased, are also considered. Strong programmatic emphasis on life cycle cost and productivity is recommended.

Developing Higher-Order Thinking Skills through WebQuests

ERIC Educational Resources Information Center

Polly, Drew; Ausband, Leigh

2009-01-01

In this study, 32 teachers participated in a year-long professional development project related to technology integration in which they designed and implemented a WebQuest. This paper describes the extent to which higher-order thinking skills (HOTS) and levels of technology implementation (LoTI) occur in the WebQuests that participants designed.…

Successful Information and Communication Technology Implementation Strategies for Rural Communities: An Investigation of Tech-Based Economic Development Programs

ERIC Educational Resources Information Center

Sullivan, Donna Annette

2009-01-01

Many rural communities across America face several obstacles in the implementation of information and communication technologies (ICTs) initiatives and struggle with the best approaches for leveraging these elements into an economic development strategy. These obstacles include: lack of quality local ICTs infrastructure, funding, inability to…

Assistive Technology Instruction within a Continuously Evolving Technology Environment

ERIC Educational Resources Information Center

Peterson-Karlan, George R.

2015-01-01

The movement toward greater availability of online education in the university setting creates challenges for design, development, and implementation of online courses, particularly those focused on the educational use of technology as content. This article is structured around a central theme of designing and implementing hybrid online courses…

Electro-Technologies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technologies Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in electro-technologies; enhance employability skills, especially in electro-technologies industries; and…

Knowledge Consolidation Analysis: Toward a Methodology for Studying the Role of Argument in Technology Development

ERIC Educational Resources Information Center

Dyehouse, Jeremiah

2007-01-01

Researchers studying technology development often examine how rhetorical activity contributes to technologies' design, implementation, and stabilization. This article offers a possible methodology for studying one role of rhetorical activity in technology development: knowledge consolidation analysis. Applying this method to an exemplar case, the…

Use of health information technology to advance evidence-based care: lessons from the VA QUERI program.

PubMed

Hynes, Denise M; Weddle, Timothy; Smith, Nina; Whittier, Erika; Atkins, David; Francis, Joseph

2010-01-01

As the Department of Veterans Affairs (VA) Health Services Research and Development Service's Quality Enhancement Research Initiative (QUERI) has progressed, health information technology (HIT) has occupied a crucial role in implementation research projects. We evaluated the role of HIT in VA QUERI implementation research, including HIT use and development, the contributions implementation research has made to HIT development, and HIT-related barriers and facilitators to implementation research. Key informants from nine disease-specific QUERI Centers. Documentation analysis of 86 implementation project abstracts followed up by semi-structured interviews with key informants from each of the nine QUERI centers. We used qualitative and descriptive analyses. We found: (1) HIT provided data and information to facilitate implementation research, (2) implementation research helped to further HIT development in a variety of uses including the development of clinical decision support systems (23 of 86 implementation research projects), and (3) common HIT barriers to implementation research existed but could be overcome by collaborations with clinical and administrative leadership. Our review of the implementation research progress in the VA revealed interdependency on an HIT infrastructure and research-based development. Collaboration with multiple stakeholders is a key factor in successful use and development of HIT in implementation research efforts and in advancing evidence-based practice.

Professional development of Russian HEIs' management and faculty in CDIO standards application

NASA Astrophysics Data System (ADS)

Chuchalin, Alexander; Malmqvist, Johan; Tayurskaya, Marina

2016-07-01

The paper presents the approach to complex training of managers and faculty staff for system modernisation of Russian engineering education. As a methodological basis of design and implementation of the faculty development programme, the CDIO (Conceive-Design-Implement-Operate) Approach was chosen due to compliance of its concept to the purposes and tasks of engineering education development in Russia. The authors describe the structure, the content and implementation technology of the programme designed by Tomsk Polytechnic University and Skolkovo Institute of Science and Technology with the assistance of Chalmers University of Technology and KTH Royal Institute of Technology and other members of the CDIO Initiative. The programme evaluation based on the questionnaire results showed that the programme content is relevant, has high practical value and high level of novelty for all categories of participants. Therefore, the CDIO approach was recommended for implementation to improve various elements of the engineering programme such as learning outcomes, content and structure, teaching, learning and assessment methods. Besides, the feedback results obtained through programme participants' survey contribute to identification of problems preventing development of engineering education in Russia and thus serve as milestones for further development of the programme.

Agriscience Teachers' Implementation of Digital Game-based Learning in an Introductory Animal Science Course

NASA Astrophysics Data System (ADS)

Webb, Angela W.; Bunch, J. C.; Wallace, Maria F. G.

2015-12-01

In today's technological age, visions for technology integration in the classroom continue to be explored and examined. Digital game-based learning is one way to purposefully integrate technology while maintaining a focus on learning objectives. This case study sought to understand agriscience teachers' experiences implementing digital game-based learning in an introductory animal science course. From interviews with agriscience teachers on their experiences with the game, three themes emerged: (1) the constraints of inadequate and inappropriate technologies, and time to game implementation; (2) the shift in teacher and student roles necessitated by implementing the game; and (3) the inherent competitive nature of learning through the game. Based on these findings, we recommend that pre-service and in-service professional development opportunities be developed for teachers to learn how to implement digital game-based learning effectively. Additionally, with the potential for simulations that address cross-cutting concepts in the next generation science standards, digital game-based learning should be explored in various science teaching and learning contexts.

Review of automated vehicle technology : policy and implementation implications.

DOT National Transportation Integrated Search

2016-03-14

The goals of this project were to undergo a systematic review of automated vehicle technologies with a focus on policy : implications, methods of implementation, regulation by states, and developments occurring on legal fronts, ultimately creating a ...

Exploring the sociotechnical intersection of patient safety and electronic health record implementation

PubMed Central

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-01-01

Objective The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). Methods We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). Results The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human–computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. Discussion We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Conclusions Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology. PMID:24052536

Exploring the sociotechnical intersection of patient safety and electronic health record implementation.

PubMed

Meeks, Derek W; Takian, Amirhossein; Sittig, Dean F; Singh, Hardeep; Barber, Nick

2014-02-01

The intersection of electronic health records (EHR) and patient safety is complex. To examine the applicability of two previously developed conceptual models comprehensively to understand safety implications of EHR implementation in the English National Health Service (NHS). We conducted a secondary analysis of interview data from a 30-month longitudinal, prospective, case study-based evaluation of EHR implementation in 12 NHS hospitals. We used a framework analysis approach to apply conceptual models developed by Sittig and Singh to understand better EHR implementation and use: an eight-dimension sociotechnical model and a three-phase patient safety model (safe technology, safe use of technology, and use of technology to improve safety). The intersection of patient safety and EHR implementation and use was characterized by risks involving technology (hardware and software, clinical content, and human-computer interfaces), the interaction of technology with non-technological factors, and improper or unsafe use of technology. Our data support that patient safety improvement activities as well as patient safety hazards change as an organization evolves from concerns about safe EHR functionality, ensuring safe and appropriate EHR use, to using the EHR itself to provide ongoing surveillance and monitoring of patient safety. We demonstrate the face validity of two models for understanding the sociotechnical aspects of safe EHR implementation and the complex interactions of technology within a healthcare system evolving from paper to integrated EHR. Using sociotechnical models, including those presented in this paper, may be beneficial to help stakeholders understand, synthesize, and anticipate risks at the intersection of patient safety and health information technology.

Guidelines for Technology Infrastructure in Connecticut Schools: An Implementation Guide for the Connecticut Statewide Educational Technology Plan.

ERIC Educational Resources Information Center

Center for Educational Leadership and Technology, Inc., Marlborough, MA.

This document presents guidelines and recommendations for development of a technology infrastructure in Connecticut public schools that conforms to national industry standards for voice, video, and data communications. The guidelines present information on the state statutes regarding facilities implementation and describe industry standards.…

Learning about Urban Ecology through the Use of Visualization and Geospatial Technologies

ERIC Educational Resources Information Center

Barnett, Michael; Houle, Meredith; Mark, Sheron; Strauss, Eric; Hoffman, Emily

2010-01-01

During the past three years we have been designing and implementing a technology enhanced urban ecology program using geographic information systems (GIS) coupled with technology. Our initial work focused on professional development for in-service teachers and implementation in K-12 classrooms. However, upon reflection and analysis of the…

Preparing for High Technology: 30 Steps to Implementation. Research & Development Series No. 232.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This planning guide is one of three that addresses the concerns of postsecondary college administrators and planners regarding the planning and implementation of technician training programs in high technology areas. It specifically focuses on a 30-step planning process that is generalizable to various high technology areas. (The other two…

Embracing change: practical and theoretical considerations for successful implementation of technology assisting upper limb training in stroke

PubMed Central

2012-01-01

Background Rehabilitation technology for upper limb training of stroke patients may play an important role as therapy tool in future, in order to meet the increasing therapy demand. Currently, implementation of this technology in the clinic remains low. This study aimed at identifying criteria and conditions that people, involved in development of such technology, should take into account to achieve a (more) successful implementation of the technology in the clinic. Methods A literature search was performed in PubMed and IEEE databases, and semi-structured interviews with therapists in stroke rehabilitation were held, to identify criteria and conditions technology should meet to facilitate (implementation of) technology-assisted arm-hand skills training in rehabilitation therapy of stroke patients. In addition, an implementation strategy frequently applied in general health care was used to compose a stepwise guidance to facilitate successful implementation of this technology in therapy of stroke patients. Implementation-related criteria mentioned by therapists during the interviews were integrated in this guidance. Results Results indicate that, related to therapy content, technology should facilitate repetition of task-related movements, tailored to the patient and patient’s goals, in a meaningful context. Variability and increasing levels of difficulty in exercises should be on offer. Regarding hardware and software design of technology, the system should facilitate quick familiarisation and be easily adjustable to individual patients during therapy by therapists (and assistants). The system should facilitate adaptation to individual patients’ needs and their progression over time, should be adjustable as to various task-related variables, should be able to provide instructions and feedback, and should be able to document patient’s progression. The implementation process of technology in the clinic is provided as a stepwise guidance that consists of five phases therapists have to go through. The guidance includes criteria and conditions that motivate therapists, and make it possible for them, to actually use technology in their daily clinical practice. Conclusions The reported requirements are important as guidance for people involved in the development of rehabilitation technology for arm-hand therapy of stroke patients. The stepwise guide provides a tool for facilitating successful implementation of technology in clinical practice, thus meeting future therapy demand. PMID:22856548

Design and Implementation of Campus Application APP Based on Android

NASA Astrophysics Data System (ADS)

dongxu, Zhu; yabin, liu; xian lei, PI; weixiang, Zhou; meng, Huang

2017-07-01

In this paper, "Internet + campus" as the entrance of the Android technology based on the application of campus design and implementation of Application program. Based on GIS(Geographic Information System) spatial database, GIS spatial analysis technology, Java development technology and Android development technology, this system server adopts the Model View Controller architectue to realize the efficient use of campus information and provide real-time information of all kinds of learning and life for campus student at the same time. "Fingertips on the Institute of Disaster Prevention Science and Technology" release for the campus students of all grades of life, learning, entertainment provides a convenient.

Research and technology

NASA Technical Reports Server (NTRS)

1988-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing emphasis on its research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation, and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1988 Annual Report.

Supporting Teachers Learning Through the Collaborative Design of Technology-Enhanced Science Lessons

NASA Astrophysics Data System (ADS)

Kafyulilo, Ayoub C.; Fisser, Petra; Voogt, Joke

2015-12-01

This study used the Interconnected Model of Professional Growth (Clarke & Hollingsworth in Teaching and Teacher Education, 18, 947-967, 2002) to unravel how science teachers' technology integration knowledge and skills developed in a professional development arrangement. The professional development arrangement used Technological Pedagogical Content Knowledge as a conceptual framework and included collaborative design of technology-enhanced science lessons, implementation of the lessons and reflection on outcomes. Support to facilitate the process was offered in the form of collaboration guidelines, online learning materials, exemplary lessons and the availability of an expert. Twenty teachers participated in the intervention. Pre- and post-intervention results showed improvements in teachers' perceived and demonstrated knowledge and skills in integrating technology in science teaching. Collaboration guidelines helped the teams to understand the design process, while exemplary materials provided a picture of the product they had to design. The availability of relevant online materials simplified the design process. The expert was important in providing technological and pedagogical support during design and implementation, and reflected with teachers on how to cope with problems met during implementation.

Designing a Deeply Digital Science Curriculum: Supporting Teacher Learning and Implementation with Organizing Technologies

ERIC Educational Resources Information Center

Leary, Heather; Severance, Samuel; Penuel, William R.; Quigley, David; Sumner, Tamara; Devaul, Holly

2016-01-01

This paper examines the impacts of technology (e.g., Chromebooks, Google Drive) on teacher learning and student activity in the development and implementation of a deeply digital high school biology unit. Using design-based implementation research, teachers co-designed with researchers and curriculum specialists a student-centered unit aligned to…

Implementing Courseware as the Primary Mode of Task-Based ESP Instruction: A Case Study of EFL Students

ERIC Educational Resources Information Center

Tsai, Shu-Chiao

2015-01-01

The study reports on implementing self-developed English for specific purposes (ESP) courseware for technology industries in an elective course, "English reading for technology," offered to junior students of English as a foreign language in a technical university in southern Taiwan. Courseware implementation was combined with a…

Applied breath analysis: an overview of the challenges and opportunities in developing and testing sensor technology for human health monitoring in aerospace and clinical applications

PubMed Central

Hunter, Gary W; Dweik, Raed A

2010-01-01

The aerospace industry requires the development of a range of chemical sensor technologies for such applications as leak detection, emission monitoring, fuel leak detection, environmental monitoring, and fire detection. A family of chemical sensors are being developed based on micromachining and microfabrication technology to fabricate microsensors with minimal size, weight, and power consumption, and the use of nanomaterials and structures to develop sensors with improved stability combined with higher sensitivity. However, individual sensors are limited in the amount of information that they can provide in environments that contain multiple chemical species. Thus, sensor arrays are being developed to address detection needs in such multi-species environments. These technologies and technical approaches have direct relevance to breath monitoring for clinical applications. This paper gives an overview of developing cutting-edge sensor technology and possible barriers to new technology implementation. This includes lessons learned from previous microsensor development, recent work in development of a breath monitoring system, and future directions in the implementation of cutting edge sensor technology. Clinical applications and the potential impact to the biomedical field of miniaturized smart gas sensor technology are discussed. PMID:20622933

Implementation and Evaluation of Technology Mentoring Program Developed for Teacher Educators: A 6M-Framework

ERIC Educational Resources Information Center

Gunuc, Selim

2015-01-01

The purpose of this basic research is to determine the problems experienced in the Technology Mentoring Program (TMP), and the study discusses how these problems affect the process in general. The implementation was carried out with teacher educators in the education faculty. 8 doctorate students (mentors) provided technology mentoring…

A State of the Art Review on the Impact of Technology on Skill Demand in OECD Countries.

ERIC Educational Resources Information Center

Kim, Young-Hwa

2002-01-01

Review of research since the 1980s shows a consistent trend toward higher skill demands in Organisation for Economic Cooperation and Development countries. There is evidence both that higher skills are needed to implement technology and that implementing technology raises skill requirements. Automation is displacing low-skilled jobs and creating…

Systems Engineering and Integration for Technology Programs

NASA Technical Reports Server (NTRS)

Kennedy, Kruss J.

2006-01-01

The Architecture, Habitability & Integration group (AH&I) is a system engineering and integration test team within the NASA Crew and Thermal Systems Division (CTSD) at Johnson Space Center. AH&I identifies and resolves system-level integration issues within the research and technology development community. The timely resolution of these integration issues is fundamental to the development of human system requirements and exploration capability. The integration of the many individual components necessary to construct an artificial environment is difficult. The necessary interactions between individual components and systems must be approached in a piece-wise fashion to achieve repeatable results. A formal systems engineering (SE) approach to define, develop, and integrate quality systems within the life support community has been developed. This approach will allow a Research & Technology Program to systematically approach the development, management, and quality of technology deliverables to the various exploration missions. A tiered system engineering structure has been proposed to implement best systems engineering practices across all development levels from basic research to working assemblies. These practices will be implemented through a management plan across all applicable programs, projects, elements and teams. While many of the engineering practices are common to other industries, the implementation is specific to technology development. An accounting of the systems engineering management philosophy will be discussed and the associated programmatic processes will be presented.

The Second Prototype of the Development of a Technological Pedagogical Content Knowledge Based Instructional Design Model: An Implementation Study in a Technology Integration Course

ERIC Educational Resources Information Center

Lee, Chia-Jung; Kim, ChanMin

2014-01-01

This study presents a refined technological pedagogical content knowledge (also known as TPACK) based instructional design model, which was revised using findings from the implementation study of a prior model. The refined model was applied in a technology integration course with 38 preservice teachers. A case study approach was used in this…

Enhancing Teachers' Technological Pedagogical Knowledge and Practices: A Professional Development Model for Technology Teachers in Malawi

ERIC Educational Resources Information Center

Chikasanda, Vanwyk Khobidi Mbubzi; Otrel-Cass, Kathrin; Williams, John; Jones, Alister

2013-01-01

This paper reports on a professional development that was designed and implemented in an attempt to broaden teachers' knowledge of the nature of technology and also enhance their technological pedagogical practices. The professional development was organised in four phases with each phase providing themes for reflection and teacher learning in…

International academic program in technologies of light-water nuclear reactors. Phases of development and implementation

NASA Astrophysics Data System (ADS)

Geraskin, N. I.; Glebov, V. B.

2017-01-01

The results of implementation of European educational projects CORONA and CORONA II dedicated to preserving and further developing nuclear knowledge and competencies in the area of technologies of light-water nuclear reactors are analyzed. Present article addresses issues of design and implementation of the program for specialized training in the branch of technologies of light-water nuclear reactors. The systematic approach has been used to construct the program for students of nuclear specialties, which corresponding to IAEA standards and commonly accepted nuclear principles recognized in the European Union. Possibilities of further development of the international cooperation between countries and educational institutions are analyzed. Special attention is paid to e-learning/distance training, nuclear knowledge preservation and interaction with European Nuclear Education Network.

Development of silicon growth techniques from melt with surface heating

NASA Astrophysics Data System (ADS)

Kravtsov, Anatoly

2018-05-01

The paper contains literary and personal data on the development history of silicon-growing technology with volumetric and surface melt heating. It discusses the advantages and disadvantages of surface-heating technology. Examples are given of the implementation of such processes in the 60s-70s of the last century, and the reasons for the discontinuation of the relevant work. It describes the main solutions for the implementation of crystal growth process with the electron-beam heating of the melt surface, implemented by KEPP EU (Latvia). It discusses differences in the management of the growth process for the crystals with constant diameters compared to the Czochralski method. It lists geometrical and electro-physical properties of the obtained crystals. It describes the possible use of such crystals and the immediate challenges of technology development.

New technology continues to invade healthcare. What are the strategic implications/outcomes?

PubMed

Smith, Coy

2004-01-01

Healthcare technology continues to advance and be implemented in healthcare organizations. Nurse executives must strategically evaluate the effectiveness of each proposed system or device using a strategic planning process. Clinical information systems, computer-chip-based clinical monitoring devices, advanced Web-based applications with remote, wireless communication devices, clinical decision support software--all compete for capital and registered nurse salary dollars. The concept of clinical transformation is developed with new models of care delivery being supported by technology rather than driving care delivery. Senior nursing leadership's role in clinical transformation and healthcare technology implementation is developed. Proposed standards, expert group action, business and consumer groups, and legislation are reviewed as strategic drivers in the development of an electronic health record and healthcare technology. A matrix of advancing technology and strategic decision-making parameters are outlined.

In-Space Propulsion Solar Electric Propulsion Program Overview of 2006

NASA Technical Reports Server (NTRS)

Baggett, Randy M.; Hulgan, Wendy W.; Dankanich, John W.; Bechtel, Robert T.

2006-01-01

The primary source of electric propulsion development throughout NASA is implemented by the In-Space Propulsion Technology Project at the NASA MSFC under the management of the Science Mission Directorate. The Solar Electric Propulsion technology area's objective is to develop near and mid-term SEP technology to enhance or enable mission capture while minimizing risk and cost to the end user. Major activities include developing NASA s Evolutionary Xenon Thruster (NEXT), implementing a Standard Architecture, and developing a long life High Voltage Hall Accelerator (HiVHAC). Lower level investments include advanced feed system development, advanced cathode testing and xenon recovery testing. Progress on current investments and future plans are discussed.

INTERACTIVE ABANDONED MINE LANDS WORKSHOP SERIES - ACID MINE WATER TREATMENT TECHNOLOGIES

EPA Science Inventory

The purpose of this interactive workshop is to present and discuss active and passive acid mine wastes cleanup technologies and to discuss the apparent disconnect between their development and their implementation. The workshop addressed five main barriers to implementing innovat...

Construction Technologies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following; develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in construction; enhance employability skills, especially in construction industries; and apply and reinforce…

Why Business Modeling is Crucial in the Development of eHealth Technologies

PubMed Central

van Gemert-Pijnen, Julia EWC; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron MG; Seydel, Erwin R

2011-01-01

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology. PMID:22204896

Why business modeling is crucial in the development of eHealth technologies.

PubMed

van Limburg, Maarten; van Gemert-Pijnen, Julia E W C; Nijland, Nicol; Ossebaard, Hans C; Hendrix, Ron M G; Seydel, Erwin R

2011-12-28

The impact and uptake of information and communication technologies that support health care are rather low. Current frameworks for eHealth development suffer from a lack of fitting infrastructures, inability to find funding, complications with scalability, and uncertainties regarding effectiveness and sustainability. These issues can be addressed by defining a better implementation strategy early in the development of eHealth technologies. A business model, and thus business modeling, help to determine such an implementation strategy by involving all important stakeholders in a value-driven dialogue on what the technology should accomplish. This idea also seems promising to eHealth, as it can contribute to the whole development of eHealth technology. We therefore suggest that business modeling can be used as an effective approach to supporting holistic development of eHealth technologies. The contribution of business modeling is elaborated in this paper through a literature review that covers the latest business model research, concepts from the latest eHealth and persuasive technology research, evaluation and insights from our prior eHealth research, as well as the review conducted in the first paper of this series. Business modeling focuses on generating a collaborative effort of value cocreation in which all stakeholders reflect on the value needs of the others. The resulting business model acts as the basis for implementation. The development of eHealth technology should focus more on the context by emphasizing what this technology should contribute in practice to the needs of all involved stakeholders. Incorporating the idea of business modeling helps to cocreate and formulate a set of critical success factors that will influence the sustainability and effectiveness of eHealth technology.

Implementation and Performance of GaAs Digital Signal Processing ASICs

NASA Technical Reports Server (NTRS)

Whitaker, William D.; Buchanan, Jeffrey R.; Burke, Gary R.; Chow, Terrance W.; Graham, J. Scott; Kowalski, James E.; Lam, Barbara; Siavoshi, Fardad; Thompson, Matthew S.; Johnson, Robert A.

1993-01-01

The feasibility of performing high speed digital signal processing in GaAs gate array technology has been demonstrated with the successful implementation of a VLSI communications chip set for NASA's Deep Space Network. This paper describes the techniques developed to solve some of the technology and implementation problems associated with large scale integration of GaAs gate arrays.

Key Factors of e-Learning: A Case Study at a Spanish Bank

ERIC Educational Resources Information Center

Andreu, Rafael; Jauregui, Kety

2005-01-01

Given the evident potential shown by developing new technologies, there are increasingly more companies that develop and implement training programs that use the new-technology-based facilities. Likewise, suppliers developing new-technology-based programs have emerged seeking greater effectiveness and cost reduction as opposed to traditional…

Beyond technology acceptance to effective technology use: a parsimonious and actionable model.

PubMed

Holahan, Patricia J; Lesselroth, Blake J; Adams, Kathleen; Wang, Kai; Church, Victoria

2015-05-01

To develop and test a parsimonious and actionable model of effective technology use (ETU). Cross-sectional survey of primary care providers (n = 53) in a large integrated health care organization that recently implemented new medication reconciliation technology. Surveys assessed 5 technology-related perceptions (compatibility with work values, implementation climate, compatibility with work processes, perceived usefulness, and ease of use) and 1 outcome variable, ETU. ETU was measured as both consistency and quality of technology use. Compatibility with work values and implementation climate were found to have differential effects on consistency and quality of use. When implementation climate was strong, consistency of technology use was high. However, quality of technology use was high only when implementation climate was strong and values compatibility was high. This is an important finding and highlights the importance of users' workplace values as a key determinant of quality of use. To extend our effectiveness in implementing new health care information technology, we need parsimonious models that include actionable determinants of ETU and account for the differential effects of these determinants on the multiple dimensions of ETU. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

25 CFR 170.166 - What services do Indian LTAP centers provide?

Code of Federal Regulations, 2010 CFR

2010-04-01

... technology implementation in cooperation with the private sector; (9) Develop educational programs to... transportation technology transfer services, including education, training, technical assistance and related... developing and sharing tribal transportation technology and traffic safety systems and information with other...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1995

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program was established more than nine years ago to encourage the development and implementation of innovative treatment technologies for hazardous waste site remediation. Development of this program was in direct response to ...

Implementation of Information Communication Technology in the Teaching/Learning Process for Sustainable Development of Adults in West Africa Sub Sahara Region

ERIC Educational Resources Information Center

Nwobi, Anthonia; Ngozi, Ugwuoke; Rufina, Nwachukwu; Ogbonnaya, Kingsley A.

2016-01-01

This study examines the implementation of information technology in the teaching/learning process for sustainable development of adults in West Africa Sub Sahara Region (WASSR). Three research questions and two hypotheses guided the study. The population for the study was 3071 participants and instructors drawn from 10 education centres that were…

Developing eLearning Technologies to Implement Competency Based Medical Education: Experiences from Muhimbili University of Health and Allied Sciences

ERIC Educational Resources Information Center

Nagunwa, Thomas; Lwoga, Edda

2012-01-01

This paper provides the practical experience of developing an eLearning technology as a tool to implement Competency-based Medical Education (CBME) in Tanzania medical universities, with a specific focus on Muhimbili University of Health and Allied Sciences. The paper provides a background to eLearning and the early attempt to adopt it in 2006 at…

ForistomApp a Web application for scientific and technological information management of Forsitom foundation

NASA Astrophysics Data System (ADS)

Saavedra-Duarte, L. A.; Angarita-Jerardino, A.; Ruiz, P. A.; Dulce-Moreno, H. J.; Vera-Rivera, F. H.; V-Niño, E. D.

2017-12-01

Information and Communication Technologies (ICT) are essential in the transfer of knowledge, and the Web tools, as part of ICT, are important for institutions seeking greater visibility of the products developed by their researchers. For this reason, we implemented an application that allows the information management of the FORISTOM Foundation (Foundation of Researchers in Science and Technology of Materials). The application shows a detailed description, not only of all its members also of all the scientific production that they carry out, such as technological developments, research projects, articles, presentations, among others. This application can be implemented by other entities committed to the scientific dissemination and transfer of technology and knowledge.

Research and technology

NASA Technical Reports Server (NTRS)

1986-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation, and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1986 Annual Report.

Developing Intranets: Practical Issues for Implementation and Design.

ERIC Educational Resources Information Center

Trowbridge, Dave

1996-01-01

An intranet is a system which has "domesticated" the technologies of the Internet for specific organizational settings and goals. Although the adaptability of Hypertext Markup Language to intranets is sometimes limited, implementing various protocols and technologies enable organizations to share files among heterogeneous computers,…

Integration of educational and scientific-technological areas during the process of education of aerospace engineers

NASA Astrophysics Data System (ADS)

Mayorova, Vera

2011-09-01

National priorities, defined by modern state of high-tech industries, demand adequate problem solving of training professionals possessing required modern qualifications. Modern tendencies of the development of aerospace technologies, harsh competition in the market of space services and expansion of international cooperation for implementation of space projects, demand sharp increase of the scientific/technical level and competitiveness of the developed projects. Especially important is to be able to solve technological problems, which in turn define the cost and quality attributes of the designed item, as well as the ability to utilize the most modern design principles. Training of highly efficient, creative professionals who are capable of generating and implementing new ideas is a very important factor driving not only the development of national economy and industry, but also enriching the human capital of the country. Moscow State Technical University named after N.E. Bauman developed and successfully implemented the project-oriented technology of professional training for aerospace industry. It assumes a multitude of forms, methodologies and organizational events, which allow preparing the specialists - on the basis of integration of scientific/technological and educational environment - who are adapted to the conditions of the intellectual market. The Youth Space Center of the University is the base where graduate and post-graduate students attend unique lectures as a part of the facultative course "Applied Cosmonautics", participate in annual International Youth Science School "Space Development: Theory and Practice" and develop innovative technical projects aimed at creation of real-life space hardware. Microsatellite technologies are being developed in Bauman University through various projects, which are implemented in a coordinated manner by way of accomplishing the following steps: development of small-size satellites by universities, using them as test-beds for quick and affordable trial-and-test of new technologies and design solutions in aerospace followed by implementation of selected efficiencies in the industry; development and improvement of ground control infrastructure based in the university, which includes the Mission Control Center and the Earth Remote Sensing Center; development of cooperative partnerships with international partners in the field of microsatellite technologies with the goal of sharing experience, uniting efforts in preparing and running scientific and educational experiments and creating next-generation spacecraft by multi-national student groups. Such approaches allow creating seamless environment that unites educational, scientific and innovative processes. This allows students to develop high professionalism, modern engineering thinking and stable engineering skills at an early stage of education at the university.

Third Aerospace Environmental Technology Conference

NASA Technical Reports Server (NTRS)

Whitaker, A. F. (Editor); Cross, D. R. (Editor); Caruso, S. V. (Editor); Clark-Ingram, M. (Editor)

1999-01-01

The elimination of CFC's, Halons, TCA, other ozone depleting chemicals, and specific hazardous materials is well underway. The phaseout of these chemicals has mandated changes and new developments in aerospace materials and processes. We are beyond discovery and initiation of these new developments and are now in the implementation phase. This conference provided a forum for materials and processes engineers, scientists, and managers to describe, review, and critically assess the evolving replacement and clean propulsion technologies from the standpoint of their significance, application, impact on aerospace systems, and utilization by the research and development community. The use of these new technologies, their selection and qualification, their implementation, and the needs and plans for further developments are presented.

Implementing a One-to-One Technology Initiative in Higher Education

ERIC Educational Resources Information Center

Fridley, Daryl; Rogers-Adkinson, Diana

2015-01-01

This paper describes the process of conceptualizing and implementing a one-to-one technology initiative at a regional comprehensive university. Organized around the principle that sustainable change requires attention to clear, justifiable goals, attention to key decisions, the development of stakeholder investment, adequate training, building…

Technology Professional Development and Instructional Technology Integration among Part-Time Faculty at Illinois Community Colleges

ERIC Educational Resources Information Center

Roohani, Behnam

2014-01-01

This study focused on exploring Illinois community college faculty development coordinators' perceptions about how they are implementing faculty technology professional development programs and providing technical support for part-time faculty in the Illinois community college systems. Also examined were part-time faculty perceptions of the degree…

[An overview of the definition and implementation of the Brazilian National Policy on Health Data and Information Technology].

PubMed

Cavalcante, Ricardo Bezerra; Kerr-Pinheiro, Marta Macedo; Guimarães, Eliete Albano de Azevedo; Miranda, Richardson Machado

2015-05-01

The This qualitative study aimed to analyze the development and implementation of the Brazilian National Policy on Health Data and Information Technology (NPIIH). We analyzed documents and applied an online questionnaire to the experts involved in developing the policy. The data were submitted to content analysis using the categorical thematic modality. The PNIIS is the target of debate and proposals at various levels. Provisions have appeared in parallel to regulate measures on health data and information technology. Community participation in developing this policy and the convergence of laws, standards, resolutions, and policy-making levels in a common and broadly acknowledged and enforced policy are challenges, in addition to linking the public and private sectors. The study concludes that the National Policy on Health Data and Information Technology is making gradual progress, predominantly in theoretical debates, revisions, and updates. There are numerous challenges for its implementation and a prevailing need for legitimation.

The Superfund Innovative Technology Evaluation Program SUMMARY AND CLOSURE REPORT

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program promoted the development, commercialization, and implementation of innovative hazardous waste treatment technologies for 20 years. SITE offered a mechanism for conducting joint technology demonstration and evaluation ...

Multimedia Technologies. Desk Reference.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

This annotated bibliography was developed as a result of a May, 1991, Technology Seminar on Multimedia, and is intended to provide researchers with an overview of the literature pertaining to the development of multimedia technology, innovative applications, design, and implementation issues as well as with descriptions of major multimedia…

Technology-Supported Change: A Staff Development Opportunity.

ERIC Educational Resources Information Center

Bradshaw, Lynn K.

1997-01-01

Implementing technology in a classroom is a personal process that varies from teacher to teacher. The Concerns-Based Adoption Model identifies seven stages of concern that teachers may experience, from awareness to refocusing ideas. Innovative staff development strategies include establishing organizational structures to support technological and…

The Effects Of Disruptive Technology On Project Interdiction

DTIC Science & Technology

2016-12-01

state of the art in personal privacy and anonymity is changing every day [11], [12]. 6 Disruptive technologies like cryptology and the blockchain ...only parties to be threatened by implementations of blockchain technology. Brooklyn-based software developer ConsenSys aims to provide the same...services as Google, utilizing a distributed network of computers that synchronizes information exchange via a blockchain implementation known as Ethereum

Mechanisation and automation technologies development in work at construction sites

NASA Astrophysics Data System (ADS)

Sobotka, A.; Pacewicz, K.

2017-10-01

Implementing construction work that creates buildings is a very complicated and laborious task and requires the use of various types of machines and equipment. For years there has been a desire for designers and technologists to introduce devices that replace people’s work on machine construction, automation and even robots. Technologies for building construction are still being developed and implemented to limit people’s hard work and improve work efficiency and quality in innovative architectonical and construction solutions. New opportunities for improving work on the construction site include computerisation of technological processes and construction management for projects and processes. The aim of the paper was to analyse the development of mechanisation, automation and computerisation of construction processes and selected building technologies, with special attention paid to 3D printing technology. The state of mechanisation of construction works in Poland and trends in its development in construction technologies are presented. These studies were conducted on the basis of the available literature and a survey of Polish construction companies.

Considerations in change management related to technology.

PubMed

Luo, John S; Hilty, Donald M; Worley, Linda L; Yager, Joel

2006-01-01

The authors describe the complexity of social processes for implementing technological change. Once a new technology is available, information about its availability and benefits must be made available to the community of users, with opportunities to try the innovations and find them worthwhile, despite organizational resistances. The authors reviewed the literature from psychiatry, psychology, sociology, business, and technology to distill common denominators for success and failure related to implementing technology. Beneficial technological innovations that are simple to use and obviously save everyone time and effort are easy to inaugurate. However, innovations that primarily serve management rather than subordinates or front-line utilizers may fail, despite considerable institutional effort. This article reviews and outlines several of the more prominent theoretical models governing successful institutional change. Successful implementation of difficult technological changes requires visionary leadership that has carefully considered the benefits, consulted with influence leaders at all organizational levels to spot unintended consequences and sources of resistance, and developed a detailed plan and continuous quality assurance process to foster implementation over time.

The Impacts of Demographic Variables on Technological and Contextual Challenges of E-learning Implementation

NASA Astrophysics Data System (ADS)

Aldowah, Hanan; Ghazal, Samar; Naufal Umar, Irfan; Muniandy, Balakrishnan

2017-09-01

Information technology has achieved robust growth which has made it possible for learning to occur quickly. The rapid development of information, communication and technologies (ICT) has initiated an unparalleled transformation in universities all over the world. This development of technology and learning is offering new techniques to represent knowledge, new practices, and new global communities of learners. As a result, today’s economic and social changes force universities to try to find new learning approaches and systems. E-learning seems to be an appropriate approach in this aspect. However, the implementation of e-learning systems in universities is not an easy task because of some challenges related to context, technology, and other challenges. This paper studied the impacts of demographic data and reported the critical points for the decision makers to consider when planning and implementing e-learning in universities. A quantitative approach was used to study the effects of technological and contextual challenges on e-learning implementation in which a questionnaire was used for the data collection. According to the findings of the study, the most important challenges of the implementation of e-learning are related either to organizational (Contextual) and technological (technical) issues. The demographic variables have been found to play a direct and indirect role with the technological and contextual challenges of implementing e-learning. This paper showed that there are some significant differences in the two challenges faced by instructors in terms of the demographic variables. The result revealed that some significant differences exist between demographic variables and the two challenges of e-learning in terms of gender, age, teaching experience, ICT experience and e-learning experience. However, there is no significant difference in terms of e-learning experience. The obtained data, from such study, can provide information about what academic institutions can do before implementing e-learning to reduce and overcome the challenges in implementing e-learning in universities. So, university administrators interested in implementing e-learning should recognize the challenges that their instructors are facing and to provide the necessary policy and support to help overcome these challenges.

The Efficacy of Psychophysiological Measures for Implementing Adaptive Technology

NASA Technical Reports Server (NTRS)

Scerbo, Mark W.; Freeman, Frederick G.; Mikulka, Peter J.; Parasuraman, Raja; DiNocero, Francesco; Prinzel, Lawrence J., III

2001-01-01

Adaptive automation refers to technology that can change its mode of operation dynamically. Further, both the technology and the operator can initiate changes in the level or mode of automation. The present paper reviews research on adaptive technology. It is divided into three primary sections. In the first section, issues surrounding the development and implementation of adaptive automation are presented. Because physiological-based measures show much promise for implementing adaptive automation, the second section is devoted to examining candidate indices. In the final section, those techniques that show the greatest promise for adaptive automation as well as issues that still need to be resolved are discussed.

Power systems for future missions

NASA Technical Reports Server (NTRS)

Gill, S. P.; Frye, P. E.; Littman, Franklin D.; Meisl, C. J.

1994-01-01

A comprehensive scenario of future missions was developed and applicability of different power technologies to these missions was assessed. Detailed technology development roadmaps for selected power technologies were generated. A simple methodology to evaluate economic benefits of current and future power system technologies by comparing Life Cycle Costs of potential missions was developed. The methodology was demonstrated by comparing Life Cycle Costs for different implementation strategies of DIPS/CBC technology to a selected set of missions.

Health technology assessment to optimize health technology utilization: using implementation initiatives and monitoring processes.

PubMed

Frønsdal, Katrine B; Facey, Karen; Klemp, Marianne; Norderhaug, Inger Natvig; Mørland, Berit; Røttingen, John-Arne

2010-07-01

The way in which a health technology is used in any particular health system depends on the decisions and actions of a variety of stakeholders, the local culture, and context. In 2009, the HTAi Policy Forum considered how health technology assessment (HTA) could be improved to optimize the use of technologies (in terms of uptake, change in use, or disinvestment) in such complex systems. In scoping, it was agreed to focus on initiatives to implement evidence-based guidance and monitoring activities. A review identified systematic reviews of implementation initiatives and monitoring activities. A two-day deliberative workshop was held to discuss key papers, members' experiences, and collectively address key questions. This consensus paper was developed by email and finalized at a postworkshop meeting. Evidence suggests that the impact and use of HTA could be increased by ensuring timely delivery of relevant reports to clearly determined policy receptor (decision-making) points. To achieve this, the breadth of assessment, implementation initiatives such as incentives and targeted, intelligent dissemination of HTA result, needs to be considered. HTA stakeholders undertake a variety of monitoring activities, which could inform optimal use of a technology. However, the quality of these data varies and is often not submitted to an HTA. Monitoring data should be sufficiently robust so that they can be used in HTA to inform optimal use of technology. Evidence-based implementation initiatives should be developed for HTA, to better inform decision makers at all levels in a health system about the optimal use of technology.

Cost-Effective and High-Resolution Subsurface Characterization Using Hydraulic Tomography

DTIC Science & Technology

2017-08-28

implementation and compare costs associated with HT and conventional methods. TECHNOLOGY DESCRIPTION The HT concept is analogous to the Computerized...develop guidance for HT field implementation and compare costs associated with HT and conventional methods. 15. SUBJECT TERMS Subsurface...3  2.1  TECHNOLOGY DESCRIPTION

Professional Development in Educational Technology through Teacher Support Teams

ERIC Educational Resources Information Center

Alvarado, Guillermo

2017-01-01

Since the turn of the 21st century, the implementation of instructional technologies in the secondary classroom has increased exponentially. As a result, teacher support in its implementation has become paramount. Using a qualitative case study design, this research explored teachers' and administrators' perceptions of teacher support teams that…

Review of Stack CSP Technologies

NASA Technical Reports Server (NTRS)

Ghaffarian, R.

1999-01-01

CSP is an emerging technology with significant potential growth in stacking. Many of the stacking techniques for conventional packages could be implemented for CSP once materials, process, and system development for finer features are developed.

Strategies from a nationwide health information technology implementation: the VA CART story.

PubMed

Box, Tamára L; McDonell, Mary; Helfrich, Christian D; Jesse, Robert L; Fihn, Stephan D; Rumsfeld, John S

2010-01-01

The VA Cardiovascular Assessment, Reporting, and Tracking (CART) system is a customized electronic medical record system which provides standardized report generation for cardiac catheterization procedures, serves as a national data repository, and is the centerpiece of a national quality improvement program. Like many health information technology projects, CART implementation did not proceed without some barriers and resistance. We describe the nationwide implementation of CART at the 77 VA hospitals which perform cardiac catheterizations in three phases: (1) strategic collaborations; (2) installation; and (3) adoption. Throughout implementation, success required a careful balance of technical, clinical, and organizational factors. We offer strategies developed through CART implementation which are broadly applicable to technology projects aimed at improving the quality, reliability, and efficiency of health care.

The GETE approach to facilitating the commercialization and use of DOE-developed environmental technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harvey, T.N.

The Global Environmental Technology Enterprise (GETE) was conceived to develop and implement strategies to facilitate the commercialization of innovative, cost-effective Department of Energy (DOE)-developed environmental technologies. These strategies are needed to aid DOE`s clean-up mission; to break down barriers to commercialization; and to build partnerships between the federal government and private industry in order to facilitate the development and use of innovative environmental technologies.

Research and technology 1987 annual report of the Kennedy Space Center

NASA Technical Reports Server (NTRS)

1987-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation, and is responsible for implementation of the majority of the projects of this Kennedy Space Center 1987 Annual Report.

Technology Education. A Maryland Curricular Framework.

ERIC Educational Resources Information Center

Maryland State Dept. of Education, Baltimore.

This document is designed to help administrators and teachers plan, develop, and implement technology education (TE) programs. It provides a philosophical foundation and broad outline for constructing comprehensive TE programs that develop middle school and high school students' technological literacy by focusing on the ways in which ingenuity,…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) PROGRAM ANNUAL REPORT TO CONGRESS 2003

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for 17 years. SITE offers a mechanism for conducting joint technology demonstration a...

The Superfund Innovative Technology Evaluation Program Annual Report to Congress FY2004

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization, and implementation of innovative hazardous waste treatment technologies for 18 years. SITE offers a mechanism for conducting joint technology demonstration ...

Professional Development in Technology at High Achieving Schools

ERIC Educational Resources Information Center

Ryan, Kevin D.

2017-01-01

This study analyzed educators' perception of professional development offered through schools in the area of technology implementation and tried to define its perceived effectiveness in meeting the professional development conceptual framework defined by Gardner, Baker, Vogt, and Hodel in "Four Approaches to Professional Development".…

Internet-based computer technology on radiotherapy.

PubMed

Chow, James C L

2017-01-01

Recent rapid development of Internet-based computer technologies has made possible many novel applications in radiation dose delivery. However, translational speed of applying these new technologies in radiotherapy could hardly catch up due to the complex commissioning process and quality assurance protocol. Implementing novel Internet-based technology in radiotherapy requires corresponding design of algorithm and infrastructure of the application, set up of related clinical policies, purchase and development of software and hardware, computer programming and debugging, and national to international collaboration. Although such implementation processes are time consuming, some recent computer advancements in the radiation dose delivery are still noticeable. In this review, we will present the background and concept of some recent Internet-based computer technologies such as cloud computing, big data processing and machine learning, followed by their potential applications in radiotherapy, such as treatment planning and dose delivery. We will also discuss the current progress of these applications and their impacts on radiotherapy. We will explore and evaluate the expected benefits and challenges in implementation as well.

Methodology for Evaluating a Novel Education Technology: A Case Study of Handheld Video Games in Chile

ERIC Educational Resources Information Center

Margolis, Jesse L.; Nussbaum, Miguel; Rodriguez, Patricio; Rosas, Ricardo

2006-01-01

Many school systems, in both the developed and developing world, are implementing educational technology to assist in student learning. However, there is no clear consensus on how to evaluate these new technologies. This paper proposes a comprehensive methodology for estimating the value of a new educational technology in three steps: benefit…

Trends in the Development of Technology and Engineering Education in Emerging Economies

ERIC Educational Resources Information Center

Adegbuyi, P. A. O.; Uhomoibhi, J. O.

2008-01-01

Purpose: The purpose of this paper is to report on the nature of technology and engineering education provision in developing economies, focusing on Nigeria. Design/methodology/approach: The paper draws on recent developments in the shake up and implementation of new measures to call for quality technology and engineering education in the country,…

Implementing technology to improve medication safety in healthcare facilities: a literature review.

PubMed

Hidle, Unn

Medication errors remain one of the most common causes of patient injuries in the United States, with detrimental outcomes including adverse reactions and even death. By developing a better understanding of why and how medication errors occur, preventative measures may be implemented including technological advances. In this literature review, potential methods of reducing medication errors were explored. Furthermore, technology tools available for medication orders and administration are described, including advantages and disadvantages of each system. It was found that technology can be an excellent aid in improving safety of medication administration. However, computer technology cannot replace human intellect and intuition. Nurses should be involved when implementing any new computerized system in order to obtain the most appropriate and user-friendly structure.

RFID in the healthcare supply chain: usage and application.

PubMed

Kumar, Sameer; Swanson, Eric; Tran, Thuy

2009-01-01

The purposes of this study are to first, determine the most efficient and cost effective portions of the healthcare supply chain in which radio frequency identification devices (RFID) can be implemented. Second, provide specific examples of RFID implementation and show how these business applications will add to the effectiveness of the healthcare supply chain. And third, to describe the current state of RFID technology and to give practical information for managers in the healthcare sector to make sound decisions about the possible implementation of RFID technology within their organizations. Healthcare industry literature was reviewed and examples of specific instances of RFID implementation were examined using an integrated simulation model developed with Excel, @Risk and Visio software tools. Analysis showed that the cost of implementing current RFID technology is too expensive for broad and sweeping implementation within the healthcare sector at this time. However, several example applications have been identified in which this technology can be effectively leveraged in a cost-effective way. This study shows that RFID technology has come a long way in the recent past and has potential to improve healthcare sector productivity and efficiency. Implementation by large companies such as Wal-mart has helped to make the technology become much more economical in its per unit cost as well as its supporting equipment and training costs. The originality of this study lies in the idea that few practical and pragmatic approaches have been taken within the academic field of study for the implementation of RFID into the healthcare supply chain. Much of the research has focused on specific companies or portions of the supply chain and not the entire supply chain. Also, many of the papers have discussed the future of the supply chain that is heavily dependent on advances in RFID technology. A few viable applications of how RFID technology can be implemented in the healthcare supply chain are presented and how the current state of technology limits the broad use and implementation of this technology in the healthcare industry.

National hydrogen technology competitiveness analysis with an integrated fuzzy AHP and TOPSIS approaches: In case of hydrogen production and storage technologies

NASA Astrophysics Data System (ADS)

Lee, Seongkon; Mogi, Gento

2017-02-01

The demand of fossil fuels, including oil, gas, and coal has been increasing with the rapid development of developing countries such as China and India. U.S., Japan, EU, and Korea have been making efforts to transfer to low carbon and green growth economics for sustainable development. And they also have been measuring to cope with climate change and the depletion of conventional fuels. Advanced nations implemented strategic energy technology development plans to lead the future energy market. Strategic energy technology development is crucial alternative to address the energy issues. This paper analyze the relative competitiveness of hydrogen energy technologies in case of hydrogen production and storage technologies from 2006 to 2010. Hydrogen energy technology is environmentally clean technology comparing with the previous conventional energy technologies and will play a key role to solve the greenhouse gas effect. Leading nations have increasingly focused on hydrogen technology R&D. This research is carried out the relative competitiveness of hydrogen energy technologies employed by an integrated fuzzy analytic hierarchy process (Fuzzy AHP) and The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approaches. We make four criteria, accounting for technological status, R&D budget, R&D human resource, and hydrogen infra. This research can be used as fundamental data for implementing national hydrogen energy R&D planning for energy policy-makers.

The Challenges of Adopting a Culture of Mission Command in the US Army

DTIC Science & Technology

2015-05-23

NUMBER 6. AUTHOR(S) LTC(P) James W. Wright 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND...the development and implementation of high- end information technology creates a paradox for mission command. 15. SUBJECT TERMS Mission command...centralized control and less risk. Likewise, the development and implementation of high- end information technology creates a paradox for mission

Modeling and Simulation Roadmap to Enhance Electrical Energy Security of U.S. Naval Bases

DTIC Science & Technology

2012-03-01

evaluating power system architectures and technologies and, therefore, can become a valuable tool for the implementation of the described plan for Navy...a well validated and consistent process for evaluating power system architectures and technologies and, therefore, can be a valuable tool for the...process for evaluating power system architectures and component technologies is needed to support the development and implementation of these new

EHR implementation in South Africa: how do we get it right?

PubMed

Yogeswaran, Parimalaranie; Wright, Graham

2010-01-01

In an environment of expanding demand on the health care system to provide equitable, accessible and safe health care, usage of information communication technology is one of the strategies identified to fulfil such expectations. Electronic Health Record (EHR) is an important tool towards achieving better health care using such technology, although, across the world EHR implementation has experienced a high failure rate. Nevertheless South Africa has made a strategic decision to implement EHR system in the public health sector. An evaluation toolkit was developed, to measure the state of readiness of health institutions in South Africa in implementing EHR based on Kaplan and Norton's work on Balanced Score Card (BSC), and the subsequent variant model developed by Protti. A Critical Success Factor (CSF) scorecard to assess the state of readiness and a Balanced Score Card matrix to be used as a strategic framework was developed. These tools were validated using critiques by a panel of experts. The toolkit developed has the potential to assist the organization towards a better EHR implementation path.

Relationship among science teacher personality characteristics and degree of teacher classroom implementation after in-service workshop

NASA Astrophysics Data System (ADS)

Sechler, Phares Lochiel Coleman

State departments of public instruction require that teachers periodically update their licenses throughout their teaching careers. Various professional development events such as in-service workshops, university offerings, and special innovative programs provide opportunities for novice and experienced teachers to grow professionally. The "Team Science" workshop was designed from models supported by research that described guidelines for successful workshop strategies. In evaluating the workshop, the question was asked "Why did not all teachers implement the ideas from the workshop in their science classrooms?" This study investigates the possible relationship between teacher personality characteristics and implementation of technology innovations. Team Science was an extensive workshop program planned to develop science teachers' expertise in using computer and video technology to teach in physical science, chemistry, and physics classrooms in rural school in North Carolina. Upon evaluating the four-year effort, it was found that the 23 participants implemented the technological strategies at various levels. At the higher end of the range of technology use, some teachers exhibited complete integration of the computers and interfacing devices into both the laboratory work and the classroom inquiry. At the lower end of the range, some teachers used the technology very little. The resulting question emerged from the data collected: Do specific teacher personality characteristics (independent variables) correlate with the degree of implementation (dependent variable) of the innovative ideas and tools used in the teacher's science classroom after the in-service workshop? To determine if there were any significant personality traits, each teacher was given five personality tests. The tests were Hunt's Conceptual Development Test, the Paragraph Completion Test; James Rest's Defining Issues Test; Simmons Personal Survey, an emotional tendency test; the Myers-Briggs Type Indicator; and Riggs and Enochs Self-Efficacy Test. The data were analyzed using descriptive statistics, multiple regression, and factor analysis to see what variables were predictors of implementation. The regression analysis revealed that subtests from Myers-Briggs Type Indicator, Simmons Personal Survey, Hunt's Paragraph Completion Test, and Rest's Defining Issues Test could be used to predict implementation. Factor analysis indicated teachers who implemented the technology were "risk takers" and "flexible planners."

Technological Developments That Will Influence Teachers' Use of Technology to Improve Student Learning in California's Public Middle Schools by the Year 2017

ERIC Educational Resources Information Center

Solorzano, Monica

2013-01-01

Purpose. The purpose of this study was to (a) identify 5 top developments in educational technology that will be available to California's public middle schools in the next 5 years, (b) determine the likelihood of implementing these technological developments in California's public middle schools in the next 5 years, (c) determine the impact these…

Design Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in design; enhance employability skills, especially in design occupations; and apply and reinforce learning…

Enterprise & Innovation. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in enterprise and innovation; enhance employability skills, especially in entrepreneurial pursuits; and apply…

Persistent Teaching Practices after Geospatial Technology Professional Development

ERIC Educational Resources Information Center

Rubino-Hare, Lori A.; Whitworth, Brooke A.; Bloom, Nena E.; Claesgens, Jennifer M.; Fredrickson, Kristi M.; Sample, James C.

2016-01-01

This case study described teachers with varying technology skills who were implementing the use of geospatial technology (GST) within project-based instruction (PBI) at varying grade levels and contexts 1 to 2 years following professional development. The sample consisted of 10 fifth- to ninth-grade teachers. Data sources included artifacts,…

Agriculture. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in agriculture; enhance employability skills, especially in foods; and apply and reinforce learning developed…

Progress on field study with precision mobile drip irrigation technologly

USDA-ARS?s Scientific Manuscript database

Precision mobile drip irrigation (PMDI) is a technology that was developed in the 1970s that converts drop hoses on moving irrigation systems to dripline. Although this technology was developed more than 40 years ago, it was not widely implemented and few studies reported on its performance. Recentl...

On-line Technology Information System (OTIS): Solid Waste Management Technology Information Form (SWM TIF)

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Boulanger, Richard; Hogan, John A.; Rodriguez, Luis

2003-01-01

Contents include the following: What is OTIS? OTIS use. Proposed implementation method. Development history of the Solid Waste Management (SWM) Technology Information Form (TIF) and OTIS. Current development state of the SWM TIF and OTIS. Data collection approach. Information categories. Critiques/questions/feedback.

Professional Development Integrating Technology: Does Delivery Format Matter?

ERIC Educational Resources Information Center

Claesgens, Jennifer; Rubino-Hare, Lori; Bloom, Nena; Fredrickson, Kristi; Henderson-Dahms, Carol; Menasco, Jackie; Sample, James

2013-01-01

The goal of the two Power of Data (POD) projects was to increase science, technology and math skills through the implementation of project-based learning modules that teach students how to solve problems through data collection and analysis utilizing geospatial technologies. Professional development institutes in two formats were offered to…

From Research to Flight: Thinking About Implementation While Performing Fundamental Research

NASA Technical Reports Server (NTRS)

Johnson, Les

2010-01-01

This slide presentation calls for a strategy to implement new technologies. Such a strategy would allow advanced space transportation technologies to mature for exploration beyond Earth orbit. It discusses the difference between technology push versus technology pull. It also reviews the three basic technology readiness levels (TRL). The presentation traces examples of technology development to flight application: the Space Shuttle Main Engine Advanced Health Management System, the Friction Stir Welding technology the (auto-adjustable pin tool). A couple of technologies currently not in flight, but are being reviewed for potential use are: cryogenic fluid management (CFM), and solar sail propulsion. There is also an attempt to explain why new technologies are so difficult to field.

On Study of Application of Power Electronical Technology in Field of Energy Conservation

NASA Astrophysics Data System (ADS)

Song, Ke

2017-09-01

aiming at achieving the sustainable development in economy and improving living standard of the residents, the government departments in China have strengthened the promotion of green, low-carbon and sustainable development concepts. Under this context, the energy conservation concept is implemented during the implementation of social production and life activities. Currently, in order to ensure the improvement in social energy conservation benefits, the advanced technologies are applied by China's enterprises and residents. This paper, based on this, discusses the development situations of energy conservation in China, and analyzes the application of power electronical technology in the field of energy conservation, hoping to realize the sustainable development of energy conservation cause in China and to gain high yield.

DEMONSTRATION AND EVALUATION OF INNOVATIVE REMEDIATION TECHNOLOGIES THROUGH THE EPA SITE PROGRAM

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfuly promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for 18 years. SITE offers a mechanism for conducting joint technology demonstration an...

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1996

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has been successfully promoting the development, commercialization and implementation of innovative hazardous waste treatment technologies for more than 10 years. SITE offers a mechanism for conducting joint technology...

SUPERFUND INNOVTIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY 1997

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for more than 12 years. SITE offers a mechanism for conducting joint technology demon...

THE SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY1999

EPA Science Inventory

The Superfund Innovative Technology Evaluation (SITE) Program has successfully promoted the development, commercialization and implementation of innovative hazardous waste treatment technologies for more than 14 years. SITE offers a mechanism for conducting joint technology demon...

Research and technology at Kennedy Space Center

NASA Technical Reports Server (NTRS)

1989-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of current mission, the technical tools are developed needed to execute Center's mission relative to future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1989 Annual Report.

Research and technology 1991 annual report

NASA Technical Reports Server (NTRS)

1991-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, NASA Kennedy is placing increasing emphasis on the center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of the current mission, the technical tools are being developed which are needed to execute the center's mission relative to future programs. The Engineering Development Directorate encompasses most of the labs and other center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1991 annual report.

3D Holographic Technology and Its Educational Potential

ERIC Educational Resources Information Center

Lee, Hyangsook

2013-01-01

This article discusses a number of significant developments in 3D holographic technology, its potential to revolutionize aspects of teaching and learning, and challenges of implementing the technology in educational settings.

Resistance to Information Technology in Public Procurement in Tanzania

ERIC Educational Resources Information Center

Nditi, Christopher

2010-01-01

Organizations have become more dependent on information technology (IT) in the 21st century. But IT implementation and use is resisted in certain sectors of Tanzania, particularly in government-run enterprises. The purpose of this study was to investigate the causes and consequences of resistance to IT development and implementation in the…

Best Implementation Practices: Disseminating New Assessment Technologies in a Juvenile Justice Agency

ERIC Educational Resources Information Center

Young, Douglas; Moline, Karl; Farrell, Jill; Bierie, David

2006-01-01

Much has been written in recent years about advances in assessment technologies designed to aid decision making in the juvenile justice system. Adoption and implementation of this latest generation of actuarial tools, however, have lagged behind their development. Assessment in juvenile justice exemplifies the "science-practice gap" that…

Development of a Knowledge Base for Enduser Consultation of AAL-Systems.

PubMed

Röll, Natalie; Stork, Wilhelm; Rosales, Bruno; Stephan, René; Knaup, Petra

2016-01-01

Manufacturer information, user experiences and product availability of assistive living technologies are usually not known to citizens or consultation centers. The different knowledge levels concerning the availability of technology shows the need for building up a knowledge base. The aim of this contribution is the definition of requirements in the development of knowledge bases for AAL consultations. The major requirements, such as a maintainable and easy to use structure were implemented into a web based knowledge base, which went productive in ~3700 consulting interviews of municipal technology information centers. Within this field phase the implementation of the requirements for a knowledge base in the field of AAL consulting was evaluated and further developed.

Exploration Requirements Development Utilizing the Strategy-to-Task-to-Technology Development Approach

NASA Technical Reports Server (NTRS)

Drake, Bret G.; Josten, B. Kent; Monell, Donald W.

2004-01-01

The Vision for Space Exploration provides direction for the National Aeronautics and Space Administration to embark on a robust space exploration program that will advance the Nation s scientific, security, and economic interests. This plan calls for a progressive expansion of human capabilities beyond low earth orbit seeking to answer profound scientific and philosophical questions while responding to discoveries along the way. In addition, the Vision articulates the strategy for developing the revolutionary new technologies and capabilities required for the future exploration of the solar system. The National Aeronautics and Space Administration faces new challenges in successfully implementing the Vision. In order to implement a sustained and affordable exploration endeavor it is vital for NASA to do business differently. This paper provides an overview of the strategy-to-task-to-technology process being used by NASA s Exploration Systems Mission Directorate to develop the requirements and system acquisition details necessary for implementing a sustainable exploration vision.

Research and technology

NASA Technical Reports Server (NTRS)

1985-01-01

As the NASA Center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center is placing increasing emphasis on the Center's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safe, more efficient, and more economical execution of our current mission, we are developing the technological tools needed to execute the Center's mission relative to Space Station and other future programs. The Engineering Development Directorate encompasses most of the laboratories and other Center resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this Kennedy Space Center 1985 Annual Report. The report contains brief descriptions of research and technology projects in major areas of Kennedy Space Center's disciplinary expertise.

Supporting Change in Teacher Practice: Examining Shifts of Teachers' Professional Development Preferences and Needs for Technology Integration

ERIC Educational Resources Information Center

Liao, Yin-Chan; Ottenbreit-Leftwich, Anne; Karlin, Michael; Glazewski, Krista; Brush, Thomas

2017-01-01

Studies have shown that when K-12 school districts implement a new technology initiative, it is not always accompanied by effective teacher professional development (PD). Many teachers have indicated that effective technology PD experiences should incorporate their individual PD needs. The authors surveyed technology-using K-12 teachers at two…

SSBRP User Operations Facility (UOF) Overview and Development Strategy

NASA Technical Reports Server (NTRS)

Picinich, Lou; Stone, Thom; Sun, Charles; Windrem, May; Givens, John J. (Technical Monitor)

1995-01-01

This paper will present the Space Station Biological Research Project (SSBRP) User Operations Facility (UOF) architecture and development strategy. A major element of the UOF at NASA Ames Research Center, the Communication and Data System (CDS) will be the primary focus of the discussions. CDS operational, telescience, security, and development objectives will be discussed along with CDS implementation strategy. The implementation strategy discussions will include: Object Oriented Analysis & Design, System & Software Prototyping, and Technology Utilization. A CDS design overview that includes: CDS Context Diagram, CDS Architecture, Object Models, Use Cases, and User Interfaces will also be presented. CDS development brings together "cutting edge" technologies and techniques such as: object oriented development, network security, multimedia networking, web-based data distribution, JAVA, and graphical user interfaces. Use of these "cutting edge" technologies and techniques translates directly to lower development and operations costs.

User-centered design in clinical handover: exploring post-implementation outcomes for clinicians.

PubMed

Wong, Ming Chao; Cummings, Elizabeth; Turner, Paul

2013-01-01

This paper examines the outcomes for clinicians from their involvement in the development of an electronic clinical hand-over tool developed using principles of user-centered design. Conventional e-health post-implementation evaluations tend to emphasize technology-related (mostly positive) outcomes. More recently, unintended (mostly negative) consequences arising from the implementation of e-health technologies have also been reported. There remains limited focus on the post-implementation outcomes for users, particularly those directly involved in e-health design processes. This paper presents detailed analysis and insights into the outcomes experienced post-implementation by a cohort of junior clinicians involved in developing an electronic clinical handover tool in Tasmania, Australia. The qualitative methods used included observations, semi-structured interviews and analysis of clinical handover notes. Significantly, a number of unanticipated flow-on effects were identified that mitigated some of the challenges arising during the design and implementation of the tool. The paper concludes by highlighting the importance of identifying post-implementation user outcomes beyond conventional system adoption and use and also points to the need for more comprehensive evaluative frameworks to encapsulate these broader socio-technical user outcomes.

On-orbit technology experiment facility definition

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

1988-01-01

A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

Theories and Research in Educational Technology and Distance Learning Instruction through Blackboard

ERIC Educational Resources Information Center

Ouyang, John Ronghua; Stanley, Nile

2014-01-01

Educational technology is a fast-growing and increasingly developed subject in education during the past 50 years. The focus of the development of its theories and research is oriented into the methods and effectiveness of its implementation. This presentation is reviewing various educational technology related theories, exploring and discussing…

Training and Technology for the Disabled. Discovery III Conference Papers (Milwaukee, Wisconsin, March 10-12, 1986).

ERIC Educational Resources Information Center

Smith, Christopher, Ed.

Thirty-three papers are presented from a conference on the application of technology for use in the rehabilitation field. Presentations include "Technology--Opening Doors for Disabled People" (Rochlin, Bowe); "Management Information Systems Development for Rehabilitation Facilities: Critical Factors in Development and Implementation" (Robbins, et…

Examining Pre-Service Teacher Views on the Implementation of Screen-Based Writing Instruction

ERIC Educational Resources Information Center

Tok, Mehmet

2015-01-01

Today, as new technological developments continue to emerge, education, like many other fields, is going through major changes. Technological developments are causing changes to many common concepts. In particular, studies that benefit from technology in the field of education are becoming increasingly widespread, opening the door for the…

New Literacy Implementation: The Impact of Professional Development on Middle School Student Science Learning

ERIC Educational Resources Information Center

Hsu, Hui-Yin; Wang, Shaing-Kwei; Coster, Daniel

2017-01-01

With advancing technology, "literacy" evolves to include new forms of literacy made possible by digital technologies. "New literacy" refers to using technology to research, locate, evaluate, synthesize and communication information. The purpose of the study is to develop a framework to guide science teachers' new literacy…

Technology-Based Professional Development for Teaching and Learning in K-12 Classrooms

ERIC Educational Resources Information Center

Byrd, Nijia

2017-01-01

In an urban Georgia school district, teacher satisfaction surveys revealed that technology-based professional development was not equipping teachers with the skills or support needed to implement technology into their teaching practices. The purpose of this mixed-methods case study was to explore teachers' experiences and perceptions of…

Development and Implementation of High School Chemistry Modules Using Touch-Screen Technologies

ERIC Educational Resources Information Center

Lewis, Maurica S.; Zhao, Jinhui; Montclare, Jin Kim

2012-01-01

Technology was employed to motivate and captivate students while enriching their in-class education. An outreach program is described that involved college mentors introducing touch-screen technology into a high school chemistry classroom. Three modules were developed, with two of them specifically tailored to encourage comprehension of molecular…

Accessible transportation technologies research initiative : advancing mobility solutions for travelers with disabilities.

DOT National Transportation Integrated Search

2016-01-01

The Accessible Transportation Technologies Research Initiative (ATTRI) improves the mobility of travelers with disabilities through research, development, and implementation of transformative technologies, applications, or systems for people of all a...

A Model for Good Governance of Healthcare Technology Management in the Public Sector: Learning from Evidence-Informed Policy Development and Implementation in Benin

PubMed Central

Houngbo, P. Th.; Zweekhorst, M.; De Cock Buning, Tj.; Medenou, D.; Bunders, J. F. G.

2017-01-01

Good governance (GG) is an important concept that has evolved as a set of normative principles for low- and middle-income countries (LMICs) to strengthen the functional capacity of their public bodies, and as a conditional prerequisite to receive donor funding. Although much is written on good governance, very little is known on how to implement it. This paper documents the process of developing a strategy to implement a GG model for Health Technology Management (HTM) in the public health sector, based on lessons learned from twenty years of experience in policy development and implementation in Benin. The model comprises six phases: (i) preparatory analysis, assessing the effects of previous policies and characterizing the HTM system; (ii) stakeholder identification and problem analysis, making explicit the perceptions of problems by a diverse range of actors, and assessing their ability to solve these problems; (iii) shared analysis and visioning, delineating the root causes of problems and hypothesizing solutions; (iv) development of policy instruments for pilot testing, based on quick-win solutions to understand the system’s responses to change; (v) policy development and validation, translating the consensus solutions identified by stakeholders into a policy; and (vi) policy implementation and evaluation, implementing the policy through a cycle of planning, action, observation and reflection. The policy development process can be characterized as bottom-up, with a central focus on the participation of diverse stakeholders groups. Interactive and analytical tools of action research were used to integrate knowledge amongst actor groups, identify consensus solutions and develop the policy in a way that satisfies criteria of GG. This model could be useful for other LMICs where resources are constrained and the majority of healthcare technologies are imported. PMID:28056098

School-Based Technology Use Planning.

ERIC Educational Resources Information Center

Cradler, John

1994-01-01

Describes how to conduct systematic planning for technology use. The components of an effective technology use plan, derived from a comprehensive study of school-based technology, are given. Planning development, implementation, and evaluation steps are provided. Ten planning resource books are listed. (Contains five references.) (KRN)

Administrator's Guide to Technology: Planning, Funding & Implementation.

ERIC Educational Resources Information Center

Aspen Education Development Group, Gaithersburg, MD.

This document provides guidelines for administrators related to instructional technology and planning. Chapter 1 discusses planning, including developing a technology plan, facility assessment, e-rate planning, formation of a technology committee, budget planning, and hardware/software replacement plan and costs. Chapter 2 addresses…

Technology for the future - Long range planning for space technology development

NASA Technical Reports Server (NTRS)

Collier, Lisa D.; Breckenridge, Roger A.; Llewellyn, Charles P.

1992-01-01

NASA's Office of Aeronautics and Space Technology (OAST) has begun the definition of an Integrated Technology Plan for the civilian space program which guides long-term technology development for space platforms, in light of continuing marker research and other planning data. OAST has conferred particular responsibility for future candidate space mission evaluations and platform performance requirement projections to NASA-Langley. An implementation plan is devised which is amenable to periodic space-platform technology updates.

Formation of a New Entity to Support Effective Use of Technology in Medical Education: The Student Technology Committee.

PubMed

Shenson, Jared Andrew; Adams, Ryan Christopher; Ahmed, S Toufeeq; Spickard, Anderson

2015-09-17

As technology in medical education expands from teaching tool to crucial component of curricular programming, new demands arise to innovate and optimize educational technology. While the expectations of today's digital native students are significant, their experience and unique insights breed new opportunities to involve them as stakeholders in tackling educational technology challenges. The objective of this paper is to present our experience with a novel medical student-led and faculty-supported technology committee that was developed at Vanderbilt University School of Medicine to harness students' valuable input in a comprehensive fashion. Key lessons learned through the initial successes and challenges of implementing our model are also discussed. A committee was established with cooperation of school administration, a faculty advisor with experience launching educational technologies, and a group of students passionate about this domain. Committee membership is sustained through annual selective recruitment of interested students. The committee serves 4 key functions: acting as liaisons between students and administration; advising development of institutional educational technologies; developing, piloting, and assessing new student-led educational technologies; and promoting biomedical and educational informatics within the school community. Participating students develop personally and professionally, contribute to program implementation, and extend the field's understanding by pursuing research initiatives. The institution benefits from rapid improvements to educational technologies that meet students' needs and enhance learning opportunities. Students and the institution also gain from fostering a campus culture of awareness and innovation in informatics and medical education. The committee's success hinges on member composition, school leadership buy-in, active involvement in institutional activities, and support for committee initiatives. Students should have an integral role in advancing medical education technology to improve training for 21st-century physicians. The student technology committee model provides a framework for this integration, can be readily implemented at other institutions, and creates immediate value for students, faculty, information technology staff, and the school community.

Formation of a New Entity to Support Effective Use of Technology in Medical Education: The Student Technology Committee

PubMed Central

Adams, Ryan Christopher; Ahmed, S. Toufeeq; Spickard, Anderson

2015-01-01

Background As technology in medical education expands from teaching tool to crucial component of curricular programming, new demands arise to innovate and optimize educational technology. While the expectations of today’s digital native students are significant, their experience and unique insights breed new opportunities to involve them as stakeholders in tackling educational technology challenges. Objective The objective of this paper is to present our experience with a novel medical student-led and faculty-supported technology committee that was developed at Vanderbilt University School of Medicine to harness students’ valuable input in a comprehensive fashion. Key lessons learned through the initial successes and challenges of implementing our model are also discussed. Methods A committee was established with cooperation of school administration, a faculty advisor with experience launching educational technologies, and a group of students passionate about this domain. Committee membership is sustained through annual selective recruitment of interested students. Results The committee serves 4 key functions: acting as liaisons between students and administration; advising development of institutional educational technologies; developing, piloting, and assessing new student-led educational technologies; and promoting biomedical and educational informatics within the school community. Participating students develop personally and professionally, contribute to program implementation, and extend the field’s understanding by pursuing research initiatives. The institution benefits from rapid improvements to educational technologies that meet students’ needs and enhance learning opportunities. Students and the institution also gain from fostering a campus culture of awareness and innovation in informatics and medical education. The committee’s success hinges on member composition, school leadership buy-in, active involvement in institutional activities, and support for committee initiatives. Conclusions Students should have an integral role in advancing medical education technology to improve training for 21st-century physicians. The student technology committee model provides a framework for this integration, can be readily implemented at other institutions, and creates immediate value for students, faculty, information technology staff, and the school community. PMID:27731843

DEVELOPING AND IMPLEMENTING AN ESTUARINE WATER QUALITY MONITORING, ASSESSMENT AND OUTREACH PROGRAM/THE MYSOUND PROJECT

EPA Science Inventory

EPA has developed a technology transfer handbook for the EMPACT MYSound Project. The handbook highlights information and monitoring technologies developed from the EMPACT Long Island Sound Marine Monitoring (MYSound) Project. As part of the MYSound effort, telemetering data-buoys...

Administrative Aspects of Technology Implementation in Special Education. A Synthesis of Information from Eight Federally-Funded Projects.

ERIC Educational Resources Information Center

Office of Special Education and Rehabilitative Services (ED), Washington, DC. Div. of Innovation and Development.

This paper reviews and synthesizes information on the administrative aspects of technology implementation in special education, based on the findings of eight federally funded projects sponsored by the Division of Innovation and Development of the Office of Special Education Programs. Three of the projects specifically focused on administrative…

NASA Astrophysics Funds Strategic Technology Development

NASA Astrophysics Data System (ADS)

Seery, Bernard D.; Ganel, Opher; Pham, Bruce

2016-01-01

The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects.

Co-management of Water, Energy, and Food Systems: Where Are We and What Does it Take for Implementation?

NASA Astrophysics Data System (ADS)

Akhbari, M.

2015-12-01

Water, energy, and food are closely bound in consumption and production patterns. To increase resource efficiency and productivity in a sustainable fashion, co-management of water, energy, and food resources is becoming inevitable. These co-management schemes require implementation of nexus-based approaches, which takes the interconnections of water, energy, and food systems into account and considers that development in one area may have major effects on others. While society, economy and environment are the action areas to implement a nexus approach, finance, governance, infrastructure and technology can create solutions. Existing obstacles in the action areas and challenges associated with creating solutions increase the complexities to develop nexus-based approaches and complicate their implementation. This study, identifies existing social, economic, and environmental obstacles, financial demands and constraints, shortcomings in governance, and infrastructure problems in the United States as the main challenges that need to be overcome. Then, it will be discussed how advanced technology could be employed to facilitate implementation of nexus-based approaches, followed by providing some recommendations to enable institutions to employ new technology, overcome existing obstacles, and address challenges in order to implement nexus-based management approaches.

Strategies for development of industrial wastewater reuse in Thailand.

PubMed

Visvanathan, C; Cippe, A

2001-01-01

Majority of the industrial activities in Thailand are concentrated around Bangkok Metropolitan Area. The ever increasing industrial activities have led to over exploitation of water resources and discharge of significant pollution load. Therefore, it is important to identify the wastewater reuse potentials and develop strategies for its promotion within the industrial sector. Although technological advances have made it possible to treat effluents for industrial re-use, in practice, the Thai industries do lack in implementation of such technologies. Promotion of cleaner production concepts and advanced new technologies such as membrane technologies could assist the industry for the implementation of wastewater reuse projects in Thailand. This paper discusses various technical, institutional and management related issues to promote industrial wastewater reuse, with few case studies.

A Research Program in Computer Technology. 1982 Annual Technical Report

DTIC Science & Technology

1983-03-01

for the Defense Advanced Research Projects Agency. The research applies computer science and technology to areas of high DoD/ military impact. The ISI...implement the plan; New Computing Environment - investigation and adaptation of developing computer technologies to serve the research and military ...Computing Environment - ,.*_i;.;"’.)n and adaptation of developing computer technologies to serve the research and military tser communities; and Computer

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM ANNUAL REPORT TO CONGRESS FY2000

EPA Science Inventory

The Superfund Innovative Technology Evaluation Program promotes the development, commercialization, and implementation of innovative hazardous waste treatment technologies. SITE offers a mechanism for conducting joint demonstration and evaluation projects at hazardous waste site...

Development Directions for Various Types of the Light Wood-Framed Structures

NASA Astrophysics Data System (ADS)

Malesza, J.; Baszeń, M.; Miedziałowski, Cz

2017-11-01

The paper presents current trends in the development of the wood-framed structures. Authors describe the evolution of the technology of implementation, the production process of precast elements of buildings as well as selected realization on the site of these kinds of structures. The attention has been paid to the effect of implementation phases on construction and erecting technology of the wood-framed structures. The paper draws attention to the importance and enhancement of structural analysis of structures in individual phases of building realization.

Research and technology

NASA Technical Reports Server (NTRS)

1990-01-01

As the NASA center responsible for assembly, checkout, servicing, launch, recovery, and operational support of Space Transportation System elements and payloads, Kennedy Space Center (KSC) is placing increasing emphasis on KSC's research and technology program. In addition to strengthening those areas of engineering and operations technology that contribute to safer, more efficient, and more economical execution of the current mission, the technological tools needed to execute KSC's mission relative to future programs are being developed. The Engineering Development Directorate encompasses most of the laboratories and other KSC resources that are key elements of research and technology program implementation and is responsible for implementation of the majority of the projects in this KSC 1990 annual report. Projects under the following topics are covered: (1) materials science; (2) hazardous emissions and contamination monitoring; (3) biosciences; (4) autonomous systems; (5) communications and control; (6) meteorology; (7) technology utilization; and (8) mechanics, structures, and cryogenics.

VHA mental health information system: applying health information technology to monitor and facilitate implementation of VHA Uniform Mental Health Services Handbook requirements.

PubMed

Trafton, Jodie A; Greenberg, Greg; Harris, Alex H S; Tavakoli, Sara; Kearney, Lisa; McCarthy, John; Blow, Fredric; Hoff, Rani; Schohn, Mary

2013-03-01

To describe the design and deployment of health information technology to support implementation of mental health services policy requirements in the Veterans Health Administration (VHA). Using administrative and self-report survey data, we developed and fielded metrics regarding implementation of the requirements delineated in the VHA Uniform Mental Health Services Handbook. Finalized metrics were incorporated into 2 external facilitation-based quality improvement programs led by the VHA Mental Health Operations. To support these programs, tailored site-specific reports were generated. Metric development required close collaboration between program evaluators, policy makers and clinical leadership, and consideration of policy language and intent. Electronic reports supporting different purposes required distinct formatting and presentation features, despite their having similar general goals and using the same metrics. Health information technology can facilitate mental health policy implementation but must be integrated into a process of consensus building and close collaboration with policy makers, evaluators, and practitioners.

The NASA Redox Storage System Development project, 1980

NASA Technical Reports Server (NTRS)

1982-01-01

The technical accomplishments pertaining to the development of Redox systems and related technology are outlined in terms of the task elements: prototype systems development, application analyses, and supporting technology. Prototype systems development provides for a major procurement to develop an industrial capability to take the current NASA Lewis technology and go on to the design, development, and commercialization of iron-chromium Redox storage systems. Application analyses provides for the definition of application concepts and technology requirements, specific definition studies, and the identification of market sectors and their penetration potential. Supporting technology includes both in house and contractual efforts that encompass implementation of technology improvements in membranes, electrodes, reactant processing, and system design. The status of all elements is discussed.

The NASA Redox Storage System Development project, 1980

NASA Astrophysics Data System (ADS)

1982-12-01

The technical accomplishments pertaining to the development of Redox systems and related technology are outlined in terms of the task elements: prototype systems development, application analyses, and supporting technology. Prototype systems development provides for a major procurement to develop an industrial capability to take the current NASA Lewis technology and go on to the design, development, and commercialization of iron-chromium Redox storage systems. Application analyses provides for the definition of application concepts and technology requirements, specific definition studies, and the identification of market sectors and their penetration potential. Supporting technology includes both in house and contractual efforts that encompass implementation of technology improvements in membranes, electrodes, reactant processing, and system design. The status of all elements is discussed.

Braille Goes to High School.

ERIC Educational Resources Information Center

Amato, Sheila

2003-01-01

This brief report describes the development and implementation of a unique, full-year, credit-bearing, technology course in literary Braille transcription offered at a Long Island (New York) high school. It describes the program's goals, development, implementation, students, ongoing activities, outreach efforts, and student attitudes. Suggestions…

Hospital-based health technology assessment: developments to date.

PubMed

Gagnon, Marie-Pierre

2014-09-01

Health technology assessment (HTA) uses a multidisciplinary approach to answer relevant questions regarding the safety, efficacy, effectiveness and cost-effectiveness of health technologies. There is growing interest in implementing HTA methods at the hospital level because it could facilitate decision-making regarding acquisition, implementation or discontinuation of technologies or interventions within the hospital. First, this article provides an overview of current international experiences and knowledge of hospital-based HTA. Then, it presents the different types of hospital-based HTA, providing examples of each of these models, as well as their strengths and limitations. Finally, it proposes a set of emerging issues that could help inform decision-makers who consider implementing hospital-based HTA, or other stakeholders interested in the field.

NASA's Physics of the Cosmos and Cosmic Origins technology development programs

NASA Astrophysics Data System (ADS)

Clampin, Mark; Pham, Thai

2014-07-01

NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices, established in 2011, reside at the NASA Goddard Space Flight Center (GSFC). The offices serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the programs' technology development activities and technology investment portfolio, funded by NASA's Strategic Astrophysics Technology (SAT) program. We currently fund 19 technology advancements to enable future PCOS and COR missions to help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The programs' goal is to promote and support technology development needed to enable missions envisioned by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) Decadal Survey report [1] and the Astrophysics Implementation Plan (AIP) [2]. These include technology development for dark energy, gravitational waves, X-ray and inflation probe science, and a 4m-class UV/optical telescope to conduct imaging and spectroscopy studies, as a post-Hubble observatory with significantly improved sensitivity and capability.

NASA's Physics of the Cosmos and Cosmic Origins Technology Development Programs

NASA Technical Reports Server (NTRS)

Clampin, Mark; Pham, Thai

2014-01-01

NASA's Physics of the Cosmos (PCOS) and Cosmic Origins (COR) Program Offices, established in 2011, reside at the NASA Goddard Space Flight Center (GSFC). The offices serve as the implementation arm for the Astrophysics Division at NASA Headquarters. We present an overview of the programs' technology development activities and technology investment portfolio, funded by NASA's Strategic Astrophysics Technology (SAT) program. We currently fund 19 technology advancements to enable future PCOS and COR missions to help answer the questions "How did our universe begin and evolve?" and "How did galaxies, stars, and planets come to be?" We discuss the process for addressing community-provided technology gaps and Technology Management Board (TMB)-vetted prioritization and investment recommendations that inform the SAT program. The process improves the transparency and relevance of our technology investments, provides the community a voice in the process, and promotes targeted external technology investments by defining needs and identifying customers. The programs' goal is to promote and support technology development needed to enable missions envisioned by the National Research Council's (NRC) "New Worlds, New Horizons in Astronomy and Astrophysics" (NWNH) Decadal Survey report [1] and the Astrophysics Implementation Plan (AIP) [2]. These include technology development for dark energy, gravitational waves, X-ray and inflation probe science, and a 4m-class UV/optical telescope to conduct imaging and spectroscopy studies, as a post-Hubble observatory with significantly improved sensitivity and capability.

Annual Summary. Training and Technology Experimentation, Demonstration, and Utilization Program Activities (January 1-December 31, 1971).

ERIC Educational Resources Information Center

Oak Ridge Associated Universities, TN.

Directed primarily toward increasing utilization of industrial resources for training and development of disadvantaged persons, Training and Technology (TAT) activities for 1971 included: (1) development and implementation of experimental approaches to program development and operation, (2) technical support for university-conducted related…

The New Millenium Program: Serving Earth and Space Sciences

NASA Technical Reports Server (NTRS)

Li, Fuk K.

2000-01-01

NASA has exciting plans for space science and Earth observations during the next decade. A broad range of advanced spacecraft and measurement technologies will be needed to support these plans within the existing budget and schedule constraints. Many of these technology needs are common to both NASA's Office of Earth Science (OES) and Office of Space Sciences (OSS). Even though some breakthrough technologies have been identified to address these needs, project managers have traditionally been reluctant to incorporate them into flight programs because their inherent development risk. To accelerate the infusion of new technologies into its OES and OSS missions, NASA established the New Millennium Program (NMP). This program analyzes the capability needs of these enterprises, identifies candidate technologies to address these needs, incorporates advanced technology suites into validation flights, validates them in the relevant space environment, and then proactively infuses the validated technologies into future missions to enhance their capabilities while reducing their life cycle cost. The NMP employs a cross-enterprise Science Working Group, the NASA Enterprise science and technology roadmaps to define the capabilities needed by future Earth and Space science missions. Additional input from the science community is gathered through open workshops and peer-reviewed NASA Research Announcement (NRAs) for advanced measurement concepts. Technology development inputs from the technology organizations within NASA, other government agencies, federally funded research and development centers (FFRDC's), U.S. industry, and academia are sought to identify breakthrough technologies that might address these needs. This approach significantly extends NASA's technology infrastructure. To complement other flight test programs that develop or validate of individual components, the NMP places its highest priority on system-level validations of technology suites in the relevant space environment. This approach is not needed for all technologies, but it is usually essential to validate advanced system architectures or new measurement concepts. The NMP has recently revised its processes for defining candidate validation flights, and selecting technologies for these flights. The NMP now employs integrated project formulation teams, 'Which include scientists, technologists, and mission planners, to incorporate technology suites into candidate validation flights. These teams develop competing concepts, which can be rigorously evaluated prior to selection for flight. The technology providers for each concept are selected through an open, competitive, process during the project formulation phase. If their concept is selected for flight, they are incorporated into the Project Implementation Team, which develops, integrates, tests, launches, and operates the technology validation flight. Throughout the project implementation phase, the Implementation Team will document and disseminate their validation results to facilitate the infusion of their validated technologies into future OSS and OES science missions. The NMP has successfully launched its first two Deep Space flights for the OSS, and is currently implementing its first two Earth Orbiting flights for the OES. The next OSS and OES flights are currently being defined. Even though these flights are focused on specific Space Science and Earth Science themes, they are designed to validate a range of technologies that could benefit both enterprises, including advanced propulsion, communications, autonomous operations and navigation, multifunctional structures, microelectronics, and advanced instruments. Specific examples of these technologies will be provided in our presentation. The processes developed by the NMP also provide benefits across the Space and Earth Science enterprises. In particular, the extensive, nation-wide technology infrastructure developed by the NMP enhances the access to breakthrough technologies for both enterprises.

Maximizing Research and Development Resources: Identifying and Testing "Load-Bearing Conditions" for Educational Technology Innovations

ERIC Educational Resources Information Center

Iriti, Jennifer; Bickel, William; Schunn, Christian; Stein, Mary Kay

2016-01-01

Education innovations often have a complicated set of assumptions about the contexts in which they are implemented, which may not be explicit. Education technology innovations in particular may have additional technical and cultural assumptions. As a result, education technology research and development efforts as well as scaling efforts can be…

Implementing Large-Scale Instructional Technology in Kenya: Changing Instructional Practice and Developing Accountability in a National Education System

ERIC Educational Resources Information Center

Piper, Benjamin; Oyanga, Arbogast; Mejia, Jessica; Pouezevara, Sarah

2017-01-01

Previous large-scale education technology interventions have shown only modest impacts on student achievement. Building on results from an earlier randomized controlled trial of three different applications of information and communication technologies (ICTs) on primary education in Kenya, the Tusome Early Grade Reading Activity developed the…

Assistive technology in developing countries: a review from the perspective of the Convention on the Rights of Persons with Disabilities.

PubMed

Borg, Johan; Lindström, Anna; Larsson, Stig

2011-03-01

The 'Convention on the Rights of Persons with Disabilities' (CRPD) requires governments to meet the assistive technology needs of citizens. However, the access to assistive technology in developing countries is severely limited, which is aggravated by a lack of related services. To summarize current knowledge on assistive technology for low- and lower-middle-income countries published in 1995 or later, and to provide recommendations that facilitate implementation of the CRPD. Literature review. Literature was searched in web-based databases and reference lists. Studies carried out in low- and lower-middle-income countries, or addressing assistive technology for such countries, were included. The 52 included articles are dominated by product oriented research on leg prostheses and manual wheelchairs. Less has been published on hearing aids and virtually nothing on the broad range of other types of assistive technology. To support effective implementation of the CRPD in these countries, there is a need for actions and research related particularly to policies, service delivery, outcomes and international cooperation, but also to product development and production. The article has a potential to contribute to CRPD compliant developments in the provision of assistive technology in developing countries by providing practitioners with an overview of published knowledge and researchers with identified research needs.

Modular Open Network ARCHitecture (MONARCH): Transitioning plug-and-play to aerospace

NASA Astrophysics Data System (ADS)

Martin, M.; Lyke, J.

The Air Force Research Laboratory (AFRL) developed an initial plug-and-play (PnP) capability for spacecraft, similar to USB on personal computers, which better defines hardware and software interfaces and incorporates self-discovery and auto-configuration in order to simplify spacecraft development and reduce cost and schedule. PnP technology was matured through a suborbital PnP flight experiment in September 2007 and a secondary Spacecraft Avionics Experiment (SAE) payload on the TacSat-3 satellite, which launched in May 2009. AFRL developed and submitted a complete set of PnP standards through the American Institute of Aeronautics and Astronautics (AIAA) in 2011. Space electronics to adapt existing satellite components and implement full PnP on satellites in accordance with these AFRL standards was independently developed in alternate hardware implementations by Goodrich Corp under AFRL and by Northrop Grumman under Operationally Responsive Space (ORS). In 2011, AFRL conducted a cost-benefit analysis of PnP and assembled a collaborative review board (CRB) in Sept 2011 to evaluate PnP. This CRB was comprised of representatives from Space and Missiles Center (SMC), National Reconnaissance Organization (NRO), Naval Research Laboratory (NRL), John Hopkins University (JHU) Applied Physics Laboratory (APL), The Aerospace Corporation, and several large commercial and DOD satellite developers. This CRB laid out a transition path to develop and implement PnP standards for implementation in large (> 1000 kg) DOD and commercial satellites. Transition of PnP technology into operational systems continues in PnP architecture studies for SMC, PnP products from multiple space industry vendors, commercial implementations of PnP, and the Northrop Grumman ORS-2 spacecraft currently project to fly in 2014-2015. This paper provides details related to development of PnP technology, AFRL's cost-benefit analysis of PnP, recommendations of the PnP CRB, and on-going efforts to mature - nd fly PnP technology.

Relational Database Technology: An Overview.

ERIC Educational Resources Information Center

Melander, Nicole

1987-01-01

Describes the development of relational database technology as it applies to educational settings. Discusses some of the new tools and models being implemented in an effort to provide educators with technologically advanced ways of answering questions about education programs and data. (TW)

Evaluation of warm mix asphalt technology in flexible pavements.

DOT National Transportation Integrated Search

2009-09-01

The primary goal of this research project is to quantify the performance of field produced and placed mixtures that utilize WMA technology and develop a framework for design, construction, and implementation of this technology in Louisiana. This rese...

Leadership & Technology: What School Board Members Need To Know.

ERIC Educational Resources Information Center

Bailey, Gerald D.; And Others

Board members' role in technology implementation ranges from prompting development of technology plans to gathering community support for funding technology initiatives; they need substantial knowledge to enable them to ask the right questions, absorb new information, make good decisions, set appropriate policies, and lead confidently as…

DEVELOPING AND IMPLEMENTING A BIRD MIGRATION MONITORING, ASSESSMENT AND PUBLIC OUTREACH PROGRAM FOR YOUR COMMUNITY - THE BIRDCAST PROJECT

EPA Science Inventory

The USEPA has developed a technology transfer handbook for the EMPACt BirdCast bird migration monitoring project. The document is essentially a "How-To" Handbook that addresses the planning and implementation steps that were needed to develop, operate and maintain a program simil...

Engaging with Faculty to Develop, Implement, and Pilot Electronic Performance Assessments of Student Teachers Using Mobile Devices

ERIC Educational Resources Information Center

Haughton, Noela A.; Keil, Virginia L.

2009-01-01

This article discusses the development and implementation of a technology-supported student teacher performance assessment that supports integration with a larger electronic assessment system. The authors spearheaded a multidisciplinary team to develop a comprehensive performance assessment based on the Pathwise framework. The team collaborated…

Defense Technology Plan

DTIC Science & Technology

1994-09-01

implementation of the services necessary to support transparent "information pull " operation of decision support systems. This infrastructure will be implemented...technology. Some aspects of this area such as user- pull , mobile and highly distributed operation, bandwidth needs and degree of securihy are Dol)-driven...by a variety of statutory requirements. R&D will provide enhanced mission effectiveness and maintenance of fragile ecosystems. The goalis to develop

Jordanian Social Studies Teachers' Perceptions of Competency Needed for Implementing Technology in the Classroom

ERIC Educational Resources Information Center

Al Bataineh, Mohammad; Anderson, Sharon

2015-01-01

This study used a cross-sectional, ten-point Likert-type scale survey design, to examine the perception of Jordanian seventh to twelfth-grade social studies teachers of the competency needed for technology implementation in their classrooms. The instrument for this study was a modified version of a survey developed by Kelly (2003) called the…

The Implementation of Integrated Science Technology, Engineering and Mathematics (STEM) Instruction Using Robotics in the Middle School Science Classroom

ERIC Educational Resources Information Center

Ntemngwa, Celestin; Oliver, J. Steve

2018-01-01

The research study reported here was conducted to investigate the implementation of integrated STEM lessons within courses that have a single subject science focus. The purpose also included development of a pedagogical theory. This technology-based teaching was conceptualized by school administrators and teachers in order to provide middle school…

UNIVERSITY OF ARIZONA CROSS-BORDER WATER TECHNOLOGY COLLABORATION

EPA Science Inventory

The outcome of Phase I of the University of Arizona Cross-border Water Technology Collaboration project was the development and testing of solar distillation designs and selection of the final design for implementation that could be built in a developing country...

Electronic Patient Reported Outcomes in Paediatric Oncology - Applying Mobile and Near Field Communication Technology.

PubMed

Duregger, Katharina; Hayn, Dieter; Nitzlnader, Michael; Kropf, Martin; Falgenhauer, Markus; Ladenstein, Ruth; Schreier, Günter

2016-01-01

Electronic Patient Reported Outcomes (ePRO) gathered using telemonitoring solutions might be a valuable source of information in rare cancer research. The objective of this paper was to develop a concept and implement a prototype for introducing ePRO into the existing neuroblastoma research network by applying Near Field Communication and mobile technology. For physicians, an application was developed for registering patients within the research network and providing patients with an ID card and a PIN for authentication when transmitting telemonitoring data to the Electronic Data Capture system OpenClinica. For patients, a previously developed telemonitoring system was extended by a Simple Object Access Protocol (SOAP) interface for transmitting nine different health parameters and toxicities. The concept was fully implemented on the front-end side. The developed application for physicians was prototypically implemented and the mobile application of the telemonitoring system was successfully connected to OpenClinica. Future work will focus on the implementation of the back-end features.

Implementation of a Sage-Based Stirling Model Into a System-Level Numerical Model of the Fission Power System Technology Demonstration Unit

NASA Technical Reports Server (NTRS)

Briggs, Maxwell H.

2011-01-01

The Fission Power System (FPS) project is developing a Technology Demonstration Unit (TDU) to verify the performance and functionality of a subscale version of the FPS reference concept in a relevant environment, and to verify component and system models. As hardware is developed for the TDU, component and system models must be refined to include the details of specific component designs. This paper describes the development of a Sage-based pseudo-steady-state Stirling convertor model and its implementation into a system-level model of the TDU.

Development of a tripolar model of technology acceptance: Hospital-based physicians' perspective on EHR.

PubMed

Beglaryan, Mher; Petrosyan, Varduhi; Bunker, Edward

2017-06-01

In health care, information technologies (IT) hold a promise to harness an ever-increasing flow of health related information and bring significant benefits including improved quality of care, efficiency, and cost containment. One of the main tools for collecting and utilizing health data is the Electronic Health Record (EHR). EHRs implementation can face numerous barriers to acceptance including attitudes and perceptions of potential users, required effort attributed to their implementation and usage, and resistance to change. Various theories explicate different aspects of technology deployment, implementation, and acceptance. One of the common theories is the Technology Acceptance Model (TAM), which helps to study the implementation of different healthcare IT applications. The objectives of this study are: to understand the barriers of EHR implementation from the perspective of physicians; to identify major determinants of physicians' acceptance of technology; and develop a model that explains better how EHRs (and technologies in general) are accepted by physicians. The proposed model derives from a cross-sectional survey of physicians selected through multi-stage cluster sampling from the hospitals of Yerevan, Armenia. The study team designed the survey instrument based on a literature review on barriers of EHR implementation. The analysis employed exploratory structural equation modeling (ESEM) with a robust weighted least squares (WLSMV) estimator for categorical indicators. The analysis progressed in two steps: appraisal of the measurement model and testing of the structural model. The derived model identifies the following factors as direct determinants of behavioral intention to use a novel technology: projected collective usefulness; personal innovativeness; patient influence; and resistance to change. Other factors (e.g., organizational change, professional relationships, administrative monitoring, organizational support and computer anxiety) exert their effects through projected collective usefulness, perceived usefulness, and perceived ease of use. The model reconciles individual-oriented and environment-oriented theoretical approaches and proposes a Tripolar Model of Technology Acceptance (TMTA), bringing together three key pillars of the healthcare: patients, practitioners, and provider organizations. The proposed TMTA explains 85% of variance of behavioral intention to use technology. The current study draws from the barriers of EHR implementation and identifies major determinants of technology acceptance among physicians. The study proposes TMTA as affording stronger explanative and predictive abilities for the health care system. TMTA paves a long overlooked gap in TAM and its descendants, which, in organizational settings, might distort construal of technology acceptance. It also explicates with greater depth the interdependence of different participants of the healthcare and complex interactions between healthcare and technologies. Copyright © 2017 Elsevier B.V. All rights reserved.

Heavy Duty Roots Expander Heat Energy Recovery (HD-REHER)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Subramanian, Swami

2015-10-01

Eaton Corporation proposed a comprehensive project to develop and demonstrate advanced component technology that will reduce the cost of implementing Organic Rankine Cycle (ORC) Waste Heat Recovery (WHR) systems to Heavy-Duty Diesel engines, making adaptation of this fuel efficiency improving technology more commercially attractive to end-users in the next 5 to 10 year time period. Accelerated adaptation and implementation of new fuel efficiency technology into service is critical for reduction of fuel used in the commercial vehicle segment.

Research to practice in addiction treatment: key terms and a field-driven model of technology transfer.

PubMed

2011-09-01

The transfer of new technologies (e.g., evidence-based practices) into substance abuse treatment organizations often occurs long after they have been developed and shown to be effective. Transfer is slowed, in part, due to a lack of clear understanding about all that is needed to achieve full implementation of these technologies. Such misunderstanding is exacerbated by inconsistent terminology and overlapping models of an innovation, including its development and validation, dissemination to the public, and implementation or use in the field. For this reason, a workgroup of the Addiction Technology Transfer Center (ATTC) Network developed a field-driven conceptual model of the innovation process that more precisely defines relevant terms and concepts and integrates them into a comprehensive taxonomy. The proposed definitions and conceptual framework will allow for improved understanding and consensus regarding the distinct meaning and conceptual relationships between dimensions of the technology transfer process and accelerate the use of evidence-based practices. Copyright © 2011 Elsevier Inc. All rights reserved.

Modern and prospective technologies for weather modification activities: Developing a framework for integrating autonomous unmanned aircraft systems

NASA Astrophysics Data System (ADS)

DeFelice, T. P.; Axisa, Duncan

2017-09-01

This paper builds upon the processes and framework already established for identifying, integrating and testing an unmanned aircraft system (UAS) with sensing technology for use in rainfall enhancement cloud seeding programs to carry out operational activities or to monitor and evaluate seeding operations. We describe the development and assessment methodologies of an autonomous and adaptive UAS platform that utilizes in-situ real time data to sense, target and implement seeding. The development of a UAS platform that utilizes remote and in-situ real-time data to sense, target and implement seeding deployed with a companion UAS ensures optimal, safe, secure, cost-effective seeding operations, and the dataset to quantify the results of seeding. It also sets the path for an innovative, paradigm shifting approach for enhancing precipitation independent of seeding mode. UAS technology is improving and their application in weather modification must be explored to lay the foundation for future implementation. The broader significance lies in evolving improved technology and automating cloud seeding operations that lowers the cloud seeding operational footprint and optimizes their effectiveness and efficiency, while providing the temporal and spatial sensitivities to overcome the predictability or sparseness of environmental parameters needed to identify conditions suitable for seeding, and how such might be implemented. The dataset from the featured approach will contain data from concurrent Eulerian and Lagrangian perspectives over sub-cloud scales that will facilitate the development of cloud seeding decision support tools.

The Limits of Programmed Professional Development on Integration of Information and Communication Technology in Education

ERIC Educational Resources Information Center

Peeraer, Jef; Van Petegem, Peter

2012-01-01

In the framework of a development cooperation program on quality of education in Vietnam, a professional development trajectory for teacher educators on the use of information and communication technology (ICT) in education was developed and implemented over the course of a three-year program. We describe how the framework on "Technological…

Organizational Culture: Technology Integration. Review of Literature and Data Gathering

ERIC Educational Resources Information Center

Simpson, Selena E.

2008-01-01

Background: Communities of practice and technology integration within such communities requires much attention in the future of education and developing organizations. Purpose: To examine the effectiveness of technology integration and how communities of practice plays a role in the successful implementation of technology integration for teacher…

Development Principles of the Pedagogical System Aimed at Bachelor Training Based on Modern Information Technology

ERIC Educational Resources Information Center

Kurymbayev, Sayat G.; Samashova, Gulfarida E.; Alshynbayeva, Zhuldyz E.; Mukhametzhanova, Aigul O.; Sharazdin, Adilzada M.; Kalybekova, Kalamkas S.; Kosybaeva, Umitzhan A.

2016-01-01

Modern education is aimed at training competent specialists, which requires modernizing the training process by implementing innovative technologies, especially information technologies. Information technologies allow quickly accessing necessary data, which speeds up the training process. This paper deals with issues related to training bachelors…

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 23 Highways 1 2011-04-01 2011-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 23 Highways 1 2013-04-01 2013-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 23 Highways 1 2014-04-01 2014-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 23 Highways 1 2012-04-01 2012-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

The Need for Technology Management Education for Undergraduate Programs: A Conceptual Framework

ERIC Educational Resources Information Center

Tas, Murat; Yeloglu, H. Okan

2018-01-01

As the National Research Council [17] described the technology management as "a process, which includes planning, directing, control and coordination of the development and implementation of technological capabilities to shape and accomplish the strategic and operational objectives of an organization'', Technology Management education is…

23 CFR 950.5 - Requirement to use electronic toll collection technology.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... technology. (a) Any toll agency operating a toll facility pursuant to authority under a 1604 toll program... agency using electronic toll collection technology must develop and implement reasonable methods to...

Creating Technology-Enriched Classrooms: Implementational Challenges in Turkish Education

ERIC Educational Resources Information Center

Kurt, Serhat

2014-01-01

This paper provides an overview of the status of educational technology in Turkey. In the face of severe social and economic challenges, many developing nations, including Turkey, are looking to education as a potential remedy. Recognizing that in an increasingly technology-dependent world, information and communications technology skills and…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION PROGRAM: TECHNOLOGY WITH AN IMPACT

EPA Science Inventory

SITE promotes the development and implementation of innovative technologies for remediating hazardous waste sites and for evaluating the nature and extent of hazardous waste site contamination through four component segments. The SITE Program is a key element in EPA's efforts...

I-95 Corridor Coalition Project #3 (95-003) : surveillance requirements/technology

DOT National Transportation Integrated Search

1995-06-23

The purpose of this Surveillance Requirements/Technology (SR/T) Project is to develop an : implementation plan for a Corridor-wide traffic and environmental surveillance system using state-of-the-art and cost-effective technologies. To fulfill this p...

USEPA SITE PROGRAM APPROACH TO TECHNOLOGY TRANSFER AND REGULATORY ACCEPTANCE

EPA Science Inventory

The SITE Program was created to meet the increased demand for innovative technologies for hazardous waste treatment. To accomplish this mission, the program seeks to advance the development, implementation and commercialization of innovative technologies for hazardous waste chara...

Industrial storage applications overview

NASA Technical Reports Server (NTRS)

Duscha, R. A.

1980-01-01

The implementation of a technology demonstration for the food processing industry, development and technology demonstrations for selected near-term, in-plant applications and advanced industrial applications of thermal energy storage are overviewed.

Opportunities for renewable energy technologies in water supply in developing country villages

DOE Office of Scientific and Technical Information (OSTI.GOV)

Niewoehner, J.; Larson, R.; Azrag, E.

1997-03-01

This report provides the National Renewable Energy Laboratory (NREL) with information on village water supply programs in developing countries. The information is intended to help NREL develop renewable energy technologies for water supply and treatment that can be implemented, operated, and maintained by villagers. The report is also useful to manufacturers and suppliers in the renewable energy community in that it describes a methodology for introducing technologies to rural villages in developing countries.

Small Scale Beekeeping. Appropriate Technologies for Development. Manual M-17.

ERIC Educational Resources Information Center

Gentry, Curtis

This manual is designed to assist Peace Corps volunteers in the development and implementation of small-scale beekeeping programs as a tool for development. Addressed in the individual chapters are bees and humans; project planning; the types and habits of bees; the essence of beekeeping; bee space and beehives; intermediate technology beekeeping;…

Accountability Effects of Integrating Technology in Evolving Professional Development Schools.

ERIC Educational Resources Information Center

Denton, Jon J.; Manus, Alice L.

This analysis aimed at determining whether implemented technology systems and staff development with those systems at professional development schools have affected the academic performance of learners. Eight Texas elementary and secondary schools that in 1994-95 enrolled 5,337 students across 5 school districts comprised the sample for the study.…

Online Professional Development: Combining Best Practices from Teacher, Technology and Distance Education

ERIC Educational Resources Information Center

Signer, Barbara

2008-01-01

This article provides a model of online professional development that is consistent with recommendations from the fields of teacher education, technology staff development and online learning. A graduate mathematics education course designed and implemented using the model is presented to exemplify the model's core components and interactions. The…

LEAD SAFE YARDS: DEVELOPING AND IMPLEMENTING A MONITORING, ASSESSMENT, AND OUTREACH PROGRAM FOR YOUR COMMUNITY

EPA Science Inventory

The USEPA has developed a technology transfer handbook on how to plan and implement a residential soil lead monitoring, assessment, mitigation and outreach program for residential communities. The handbook provides guidance on 1) identifying potentially impacted communities, 2) c...

Action Research and ICT Implementation

ERIC Educational Resources Information Center

Krumsvik, Rune

2012-01-01

This emancipatory action research study investigates implementation of information and communication technology (ICT) in schools. The case study examined retrospectively was part of a Norwegian ICT project called PILOT, the focus of which concerns the impact on school development of a locally developed Internet subject portal and study periods.…

40 CFR 256.31 - Recommendations for developing and implementing resource conservation and recovery programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 26 2013-07-01 2013-07-01 false Recommendations for developing and implementing resource conservation and recovery programs. 256.31 Section 256.31 Protection of Environment... are identified. These studies should review various technological approaches, environmental...

40 CFR 256.31 - Recommendations for developing and implementing resource conservation and recovery programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 26 2012-07-01 2011-07-01 true Recommendations for developing and implementing resource conservation and recovery programs. 256.31 Section 256.31 Protection of Environment... are identified. These studies should review various technological approaches, environmental...

40 CFR 256.31 - Recommendations for developing and implementing resource conservation and recovery programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 25 2014-07-01 2014-07-01 false Recommendations for developing and implementing resource conservation and recovery programs. 256.31 Section 256.31 Protection of Environment... are identified. These studies should review various technological approaches, environmental...

40 CFR 256.31 - Recommendations for developing and implementing resource conservation and recovery programs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 25 2011-07-01 2011-07-01 false Recommendations for developing and implementing resource conservation and recovery programs. 256.31 Section 256.31 Protection of Environment... are identified. These studies should review various technological approaches, environmental...

Professional Development: Catalyst for Change?

ERIC Educational Resources Information Center

Niederhauser, Dale; Wessling, Sarah

2011-01-01

Difficulty securing adequate professional development (PD) has long been a barrier to the effective implementation of educational technology. Concerns about the dearth of PD for helping teachers integrate technology into their instructional practices raised nearly 25 years ago appear to still hold true despite repeated calls for increased…

The Viability of Online Education for Professional Development

ERIC Educational Resources Information Center

Carr, Vivienne B.

2010-01-01

Information technology is influencing continuing education for K-12 administrators and in-service teachers, especially with regard to asynchronous education for professional development. Implementation of instructional technology applications has required a major restructuring of the learning environment. The restructuring has included the use of…

The Study on Network Examinational Database based on ASP Technology

NASA Astrophysics Data System (ADS)

Zhang, Yanfu; Han, Yuexiao; Zhou, Yanshuang

This article introduces the structure of the general test base system based on .NET technology, discussing the design of the function modules and its implementation methods. It focuses on key technology of the system, proposing utilizing the WEB online editor control to solve the input problem and regular expression to solve the problem HTML code, making use of genetic algorithm to optimize test paper and the automated tools of WORD to solve the problem of exporting papers and others. Practical effective design and implementation technology can be used as reference for the development of similar systems.

Technologies for developing an advanced intelligent ATM with self-defence capabilities

NASA Astrophysics Data System (ADS)

Sako, Hiroshi

2010-01-01

We have developed several technologies for protecting automated teller machines. These technologies are based mainly on pattern recognition and are used to implement various self-defence functions. They include (i) banknote recognition and information retrieval for preventing machines from accepting counterfeit and damaged banknotes and for retrieving information about detected counterfeits from a relational database, (ii) form processing and character recognition for preventing machines from accepting remittance forms without due dates and/or insufficient payment, (iii) person identification to prevent machines from transacting with non-customers, and (iv) object recognition to guard machines against foreign objects such as spy cams that might be surreptitiously attached to them and to protect users against someone attempting to peek at their user information such as their personal identification number. The person identification technology has been implemented in most ATMs in Japan, and field tests have demonstrated that the banknote recognition technology can recognise more then 200 types of banknote from 30 different countries. We are developing an "advanced intelligent ATM" that incorporates all of these technologies.

Adding an Online Component to a Teacher Training Program Helps Increase Participation and Engagement

ERIC Educational Resources Information Center

Martin, Roger; Smith, Dianne

2006-01-01

We liked our training model. We were bringing in teachers during their contract time for a full day of technology staff development. We offered, through one of two training labs at our District Educational Technology Center (ETC), more than 30 different courses on skill development or how to implement technology into instructional practices. Our…

Are We There Yet? Human Factors Knowledge and Health Information Technology - the Challenges of Implementation and Impact.

PubMed

Turner, P; Kushniruk, A; Nohr, C

2017-08-01

Objective: To review the developments in human factors (HF) research on the challenges of health information technology (HIT) implementation and impact given the continuing incidence of usability problems and unintended consequences from HIT development and use. Methods: A search of PubMed/Medline and Web of Science® identified HF research published in 2015 and 2016. Electronic health records (EHRs) and patient-centred HIT emerged as significant foci of recent HF research. The authors selected prominent papers highlighting ongoing HF and usability challenges in these areas. This selective rather than systematic review of recent HF research highlights these key challenges and reflects on their implications on the future impact of HF research on HIT. Results: Research provides evidence of continued poor design, implementation, and usability of HIT, as well as technology-induced errors and unintended consequences. The paper highlights support for: (i) strengthening the evidence base on the benefits of HF approaches; (ii) improving knowledge translation in the implementation of HF approaches during HIT design, implementation, and evaluation; (iii) increasing transparency, governance, and enforcement of HF best practices at all stages of the HIT system development life cycle. Discussion and Conclusion: HF and usability approaches are yet to become embedded as integral components of HIT development, implementation, and impact assessment. As HIT becomes ever-more pervasive including with patients as end-users, there is a need to expand our conceptualisation of the problems to be addressed and the suite of tactics and strategies to be used to calibrate our pro-active involvement in its improvement. Georg Thieme Verlag KG Stuttgart.

Toward a Concept of Operations for Aviation Weather Information Implementation in the Evolving National Airspace System

NASA Technical Reports Server (NTRS)

McAdaragh, Raymon M.

2002-01-01

The capacity of the National Airspace System is being stressed due to the limits of current technologies. Because of this, the FAA and NASA are working to develop new technologies to increase the system's capacity which enhancing safety. Adverse weather has been determined to be a major factor in aircraft accidents and fatalities and the FAA and NASA have developed programs to improve aviation weather information technologies and communications for system users The Aviation Weather Information Element of the Weather Accident Prevention Project of NASA's Aviation Safety Program is currently working to develop these technologies in coordination with the FAA and industry. This paper sets forth a theoretical approach to implement these new technologies while addressing the National Airspace System (NAS) as an evolving system with Weather Information as one of its subSystems. With this approach in place, system users will be able to acquire the type of weather information that is needed based upon the type of decision-making situation and condition that is encountered. The theoretical approach addressed in this paper takes the form of a model for weather information implementation. This model addresses the use of weather information in three decision-making situations, based upon the system user's operational perspective. The model also addresses two decision-making conditions, which are based upon the need for collaboration due to the level of support offered by the weather information provided by each new product or technology. The model is proposed for use in weather information implementation in order to provide a systems approach to the NAS. Enhancements to the NAS collaborative decision-making capabilities are also suggested.

An object-oriented, technology-adaptive information model

NASA Technical Reports Server (NTRS)

Anyiwo, Joshua C.

1995-01-01

The primary objective was to develop a computer information system for effectively presenting NASA's technologies to American industries, for appropriate commercialization. To this end a comprehensive information management model, applicable to a wide variety of situations, and immune to computer software/hardware technological gyrations, was developed. The model consists of four main elements: a DATA_STORE, a data PRODUCER/UPDATER_CLIENT and a data PRESENTATION_CLIENT, anchored to a central object-oriented SERVER engine. This server engine facilitates exchanges among the other model elements and safeguards the integrity of the DATA_STORE element. It is designed to support new technologies, as they become available, such as Object Linking and Embedding (OLE), on-demand audio-video data streaming with compression (such as is required for video conferencing), Worldwide Web (WWW) and other information services and browsing, fax-back data requests, presentation of information on CD-ROM, and regular in-house database management, regardless of the data model in place. The four components of this information model interact through a system of intelligent message agents which are customized to specific information exchange needs. This model is at the leading edge of modern information management models. It is independent of technological changes and can be implemented in a variety of ways to meet the specific needs of any communications situation. This summer a partial implementation of the model has been achieved. The structure of the DATA_STORE has been fully specified and successfully tested using Microsoft's FoxPro 2.6 database management system. Data PRODUCER/UPDATER and PRESENTATION architectures have been developed and also successfully implemented in FoxPro; and work has started on a full implementation of the SERVER engine. The model has also been successfully applied to a CD-ROM presentation of NASA's technologies in support of Langley Research Center's TAG efforts.

The application test system: An approach to technology transfer. [USDA aerospace and remote sensing information requirements

NASA Technical Reports Server (NTRS)

Aaronson, A. C.; Buelow, K.; David, F. C.; Packard, R. L.; Ravet, F. W. (Principal Investigator)

1979-01-01

The latest satellite and computer processing and analysis technologies were tested and evaluated in terms of their application feasibility. Technologies evaluated include those developed, tested, and evaluated by the LACIE, as well as candidate technologies developed by the research community and private industry. The implementation of the applications test system and the technology transfer experience between the LACIE and the applications test system is discussed highlighting the approach, the achievements, and the shortcomings.

Critical technology areas of an SPS development and the applicability of European technology

NASA Technical Reports Server (NTRS)

Kassing, D.; Ruth, J.

1980-01-01

Possible system development and implementation scenarios for the hypothetical European part of a cooperative Satellite Power System effort are discussed, and the technology and systems requirements which could be used as an initial guideline for further evaluation studies are characterized. Examples of advanced European space technologies are described including high power microwave amplifiers, antennas, advanced structures, multi-kilowatt solar arrays, attitude and orbit control systems, and electric propulsion.

Architecture for Survivable System Processing (ASSP)

NASA Astrophysics Data System (ADS)

Wood, Richard J.

1991-11-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Architecture for Survivable System Processing (ASSP)

NASA Technical Reports Server (NTRS)

Wood, Richard J.

1991-01-01

The Architecture for Survivable System Processing (ASSP) Program is a multi-phase effort to implement Department of Defense (DOD) and commercially developed high-tech hardware, software, and architectures for reliable space avionics and ground based systems. System configuration options provide processing capabilities to address Time Dependent Processing (TDP), Object Dependent Processing (ODP), and Mission Dependent Processing (MDP) requirements through Open System Architecture (OSA) alternatives that allow for the enhancement, incorporation, and capitalization of a broad range of development assets. High technology developments in hardware, software, and networking models, address technology challenges of long processor life times, fault tolerance, reliability, throughput, memories, radiation hardening, size, weight, power (SWAP) and security. Hardware and software design, development, and implementation focus on the interconnectivity/interoperability of an open system architecture and is being developed to apply new technology into practical OSA components. To insure for widely acceptable architecture capable of interfacing with various commercial and military components, this program provides for regular interactions with standardization working groups (e.g.) the International Standards Organization (ISO), American National Standards Institute (ANSI), Society of Automotive Engineers (SAE), and Institute of Electrical and Electronic Engineers (IEEE). Selection of a viable open architecture is based on the widely accepted standards that implement the ISO/OSI Reference Model.

Developing an Enterprise Systems Appropriation Model in the Public Sector: A Case Study of Implementing Payroll System Replacement (PAYSERV) at the New York State Office of the State Comptroller

ERIC Educational Resources Information Center

Kamya, Moses M.

2009-01-01

This dissertation examines an enterprise system appropriation process applying structuration theory and adaptive structuration theory (AST). The key research questions are: (1) what structures emerge from the implementation of enterprise information technology (EIT); (2) how do enterprise technologies and existing organization structures influence…

Enhancement of Radiative Efficiency with Staggered InGaN Quantum Well Light Emitting Diodes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tansu, Nelson; Dierolf, Volkmar; Huang, Gensheng

2011-07-14

The technology on the large overlap InGaN QWs developed in this program is currently implemented in commercial technology in enhancing the internal quantum efficiency in major LED industry in US and Asia. The scientific finding from this work supported by the DOE enabled the implementation of this step-like staggered quantum well in the commercial LEDs.

Comparing video and avatar technology for a health education application for deaf people.

PubMed

Chiriac, Ionuţ Adrian; Stoicu-Tivadar, Lăcrămioara; Podoleanu, Elena

2015-01-01

The article describes the steps and results of a parallel research investigating e-health systems design and implementation for deaf people both in avatar and video technology. The application translates medical knowledge and concepts in deaf sign language for impaired users through an avatar. Two types of avatar technologies are taken into consideration: Video Avatar with recorded humans interface and Animated Avatar with animated figure interface. The comparative study investigates the data collection, design, implementation and the impact study. The comparative analysis of video and animated technology for data collection shows that the video format editing requires fewer skills and results are obtained easier, quicker and less expensive. The video technology supports an easier to design and implement architecture. The impact study for 2 deaf students communities is under development and for the time being the video avatar is better perceived.

College Students' Attitude towards Computer Technology

ERIC Educational Resources Information Center

Njagi, K. O.; Havice, W. L.

2011-01-01

Recent advances in the contemporary world, especially in the area of computer technology, have heralded the development and implementation of new and innovative teaching strategies and particularly with the Internet revolution. This study assessed students' attitude towards computer technology. Specifically, the study assessed differences in…

Putting It All Together.

ERIC Educational Resources Information Center

McNamara, Elizabeth T.; Grant, Cathy Miles; Wasser, Judith Davidson

1998-01-01

Discusses the parallel between the rapid increase in the acquisition of computer technology and electronic networks by schools and systemic reform movements. Provides some insight on building a school and the community planning process to support technology implementation, connecting content to technology, professional development, and training…

Technology, Students and Faculty...How To Make It Happen!

ERIC Educational Resources Information Center

Cummings, Debra; Buzzard, Connie

2002-01-01

A plan was developed by Fort Scott Community College (Kansas) to implement continuous improvement with technology integration. In addition to ensuring that college employees acquired and used high-tech computer skills, faculty had to use and incorporate technology in the classroom. (JOW)

A Teacher Proposed Heuristic for ICT Professional Teacher Development and Implementation in the South African Context

ERIC Educational Resources Information Center

du Plessis, Andre; Webb, Paul

2012-01-01

This qualitative interpretive exploratory case study investigated a sample of South African teachers' perceptions of the requirements for successful implementation of Information and Communication Technology (ICT) Professional Teacher Development (PTD) within disadvantaged South African township schools in the Port Elizabeth district in South…

Health Information Technology (HIT) Adaptation: Refocusing on the Journey to Successful HIT Implementation

PubMed Central

McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Huerta, Timothy R

2017-01-01

In past years, policies and regulations required hospitals to implement advanced capabilities of certified electronic health records (EHRs) in order to receive financial incentives. This has led to accelerated implementation of health information technologies (HIT) in health care settings. However, measures commonly used to evaluate the success of HIT implementation, such as HIT adoption, technology acceptance, and clinical quality, fail to account for complex sociotechnical variability across contexts and the different trajectories within organizations because of different implementation plans and timelines. We propose a new focus, HIT adaptation, to illuminate factors that facilitate or hinder the connection between use of the EHR and improved quality of care as well as to explore the trajectory of changes in the HIT implementation journey as it is impacted by frequent system upgrades and optimizations. Future research should develop instruments to evaluate the progress of HIT adaptation in both its longitudinal design and its focus on adaptation progress rather than on one cross-sectional outcome, allowing for more generalizability and knowledge transfer. PMID:28882812

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, Shawn W.; Farris, Ronald K.; Whaley, April M.

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear powermore » plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.« less

An Implementation Model for Integrated Learning Systems.

ERIC Educational Resources Information Center

Mills, Steven C.; Ragan, Tillman R.

This paper describes the development, validation, and research application of the Computer-Delivered Instruction Configuration Matrix (CDICM), an instrument for evaluating the implementation of Integrated Learning Systems (ILS). The CDICM consists of a 15-item checklist, describing the major components of implementation of ILS technology, to be…

Astrium Technological Roadmaps for the Next Generation of Launchers Challenges

NASA Astrophysics Data System (ADS)

Larnac, Guy

2014-06-01

Main requirement on Ariane 6 are robustness, overall ownership cost and environmental impacts. To be able to meet these requirements it's mandatory to modify our usual way of working and to think the development and qualification of technologies differently. Airbus Defence and Space in the domain of materials, technologies and structures proposes a vision which address these points declined at different level:- Selection of key metallic and composite technologies to reduce drastically the cost of manufacturing,- Implementation of robust and economical way of assembly, promoting adhesive bonding and innovative technologies- Introducing virtual testing approach coupled with advanced methods and process simulation- Introduction of in-line monitoring to reduce cost of control- Implementation of the design for environment methodology with life cycle analysis to support the choice of technologies and materials- Development of EADS common materials to get benefice of aeronautic supply chain and communalitiesTo be efficient it seems evident and mandatory to develop all these approaches in an integrated and coordinated way. Advanced technologies and methodologies are supported by a strong network of collaboration enabling the integration of upstream ideas and concepts. This network is not only focused on low TRL level. Within EADS divisions intensive collaboration is deployed in order to get synergies. On the other side it's also mandatory for reliability and obsolescence issues to take care and master the supply chain.Additive layer manufacturing and thermoplastic based composite are directly concerned by this problematic. We present how, in the domain of materials and structures, aeronautic materials are considered first and how the mechanism of common qualification shared within EADS is now developed.This vision is being implemented within Airbus Defence and Space, described and reported through roadmaps. These roadmaps are the core of Airbus defence and Space strategies for the incoming years.

Technology of interdisciplinary open-ended designing in engineering education

NASA Astrophysics Data System (ADS)

Isaev, A. P.; Plotnikov, L. V.; Fomin, N. I.

2017-11-01

Author’s technology of interdisciplinary open-ended engineering is presented in this article. This technology is an integrated teaching method that significantly increases the practical component in the educational program. Author’s technology creates the conditions to overcome the shortcomings in the engineering education. The basic ideas of the technology of open-ended engineering, experience of their implementation in higher education and the author’s vision of the teaching technology are examined in the article. The main stages of development process of the author’s technology of open-ended engineering to prepare students (bachelor) of technical profile are presented in the article. Complex of the methodological tools and procedures is shown in the article. This complex is the basis of the developed training technology that is used in educational process in higher school of engineering (UrFU). The organizational model of the technology of open-ended engineering is presented. Organizational model integrates the functions in the creation and implementation of all educational program. Analysis of the characteristics of educational activity of students working on author’s technology of interdisciplinary open-ended engineering is presented. Intermediate results of the application of author’s technology in the educational process of the engineering undergraduate are shown.

Principal Leadership for Technology-enhanced Learning in Science

NASA Astrophysics Data System (ADS)

Gerard, Libby F.; Bowyer, Jane B.; Linn, Marcia C.

2008-02-01

Reforms such as technology-enhanced instruction require principal leadership. Yet, many principals report that they need help to guide implementation of science and technology reforms. We identify strategies for helping principals provide this leadership. A two-phase design is employed. In the first phase we elicit principals' varied ideas about the Technology-enhanced Learning in Science (TELS) curriculum materials being implemented by teachers in their schools, and in the second phase we engage principals in a leadership workshop designed based on the ideas they generated. Analysis uses an emergent coding scheme to categorize principals' ideas, and a knowledge integration framework to capture the development of these ideas. The analysis suggests that principals frame their thinking about the implementation of TELS in terms of: principal leadership, curriculum, educational policy, teacher learning, student outcomes and financial resources. They seek to improve their own knowledge to support this reform. The principals organize their ideas around individual school goals and current political issues. Principals prefer professional development activities that engage them in reviewing curricula and student work with other principals. Based on the analysis, this study offers guidelines for creating learning opportunities that enhance principals' leadership abilities in technology and science reform.

Governing mobile technology use for continuing professional development in the Australian nursing profession.

PubMed

Mather, Carey Ann; Gale, Fred; Cummings, Elizabeth Anne

2017-01-01

The rapid growth in the use of mobile technology in Australia has outpaced its governance, especially in healthcare settings. Whilst some Australian professional bodies and organisations have developed standards and guidelines to direct appropriate use of social media and mobile technology, clear governance arrangements regarding when, where and how to use mobile technology at point of care in nursing are currently lacking. This paper analyses how the use of mobile technology by nurses at point of care is governed. It highlights the existence of a mobile technology paradox: an identified inability of nurses to access mobile technology in a context where it is increasingly recognised that its use in situ can enhance nursing practice while contributing to mobile learning and continuing professional development. While the recent release of the Registered Nurse Standards for Practice and accompanying Standard for Continuing Professional Development provides some direction regarding professional standards to support the use of mobile technology for mobile learning, we argue a more inclusive approach is required if emerging technologies are to be fully embraced. We describe how an implementation framework, underpinned by more detailed standards, guidelines and codes, could enable the nursing profession to be leaders in embedding mobile technology in healthcare environments nationally and globally. The prevalence of mobile technology in Australia has outpaced its governance in healthcare environments. Its limited availability at point of care is hindering nursing practice, mobile learning and continuing professional development. We discuss the emergence of mobile technology and impediments for its use by nurses in situ. We analyse the professional codes governing nursing, outlining potential reforms to enable implementation of mobile technology at point of care by nurses.

NASA Development of Aerocapture Technologies

NASA Technical Reports Server (NTRS)

James, Bonnie; Munk, Michelle; Moon, Steve

2003-01-01

Aeroassist technology development is a vital part of the NASA ln-Space Propulsion Program (ISP), which is managed by the NASA Headquarters Office of Space Science, and implemented by the Marshall Space Flight Center in Huntsville, Alabama. Aeroassist is the general term given to various techniques to maneuver a space vehicle within an atmosphere, using aerodynamic forces in lieu of propulsive fuel. Within the ISP, the current aeroassist technology development focus is aerocapture. The objective of the ISP Aerocapture Technology Project (ATP) is to develop technologies that can enable and/or benefit NASA science missions by significantly reducing cost, mass, and/or travel times. To accomplish this objective, the ATP identifies and prioritizes the most promising technologies using systems analysis, technology advancement and peer review, coupled with NASA Headquarters Office of Space Science target requirements. Plans are focused on developing mid-Technology Readiness Level (TRL) technologies to TRL 6 (ready for technology demonstration in space).

NASA Development of Aerocapture Technologies

NASA Technical Reports Server (NTRS)

James, Bonnie; Munk, Michelle; Moon, Steve

2004-01-01

Aeroassist technology development is a vital part of the NASA In-Space Propulsion Program (ISP), which is managed by the NASA Headquarters Office of Space Science, and implemented by the Marshall Space Flight Center in Huntsville, Alabama. Aeroassist is the general term given to various techniques to maneuver a space vehicle within an atmosphere, using aerodynamic forces in lieu of propulsive fuel. Within the ISP, the current aeroassist technology development focus is aerocapture. The objective of the ISP Aerocapture Technology Project (ATP) is to develop technologies that can enable and/or benefit NASA science missions by significantly reducing cost, mass, and/or travel times. To accomplish this objective, the ATP identifies and prioritizes the most promising technologies using systems analysis, technology advancement and peer review, coupled with NASA Headquarters Office of Space Science target requirements. Plans are focused on developing mid-Technology Readiness Level (TRL) technologies to TRL 6 (ready for technology demonstration in space).

A holistic framework to improve the uptake and impact of eHealth technologies.

PubMed

van Gemert-Pijnen, Julia E W C; Nijland, Nicol; van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-12-05

Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. To identify the potential and limitations of current eHealth frameworks (1999-2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap.

A Holistic Framework to Improve the Uptake and Impact of eHealth Technologies

PubMed Central

van Limburg, Maarten; Ossebaard, Hans C; Kelders, Saskia M; Eysenbach, Gunther; Seydel, Erwin R

2011-01-01

Background Many eHealth technologies are not successful in realizing sustainable innovations in health care practices. One of the reasons for this is that the current development of eHealth technology often disregards the interdependencies between technology, human characteristics, and the socioeconomic environment, resulting in technology that has a low impact in health care practices. To overcome the hurdles with eHealth design and implementation, a new, holistic approach to the development of eHealth technologies is needed, one that takes into account the complexity of health care and the rituals and habits of patients and other stakeholders. Objective The aim of this viewpoint paper is to improve the uptake and impact of eHealth technologies by advocating a holistic approach toward their development and eventual integration in the health sector. Methods To identify the potential and limitations of current eHealth frameworks (1999–2009), we carried out a literature search in the following electronic databases: PubMed, ScienceDirect, Web of Knowledge, PiCarta, and Google Scholar. Of the 60 papers that were identified, 44 were selected for full review. We excluded those papers that did not describe hands-on guidelines or quality criteria for the design, implementation, and evaluation of eHealth technologies (28 papers). From the results retrieved, we identified 16 eHealth frameworks that matched the inclusion criteria. The outcomes were used to posit strategies and principles for a holistic approach toward the development of eHealth technologies; these principles underpin our holistic eHealth framework. Results A total of 16 frameworks qualified for a final analysis, based on their theoretical backgrounds and visions on eHealth, and the strategies and conditions for the research and development of eHealth technologies. Despite their potential, the relationship between the visions on eHealth, proposed strategies, and research methods is obscure, perhaps due to a rather conceptual approach that focuses on the rationale behind the frameworks rather than on practical guidelines. In addition, the Web 2.0 technologies that call for a more stakeholder-driven approach are beyond the scope of current frameworks. To overcome these limitations, we composed a holistic framework based on a participatory development approach, persuasive design techniques, and business modeling. Conclusions To demonstrate the impact of eHealth technologies more effectively, a fresh way of thinking is required about how technology can be used to innovate health care. It also requires new concepts and instruments to develop and implement technologies in practice. The proposed framework serves as an evidence-based roadmap. PMID:22155738

End user and implementer experiences of mHealth technologies for noncommunicable chronic disease management in young adults: a qualitative systematic review protocol.

PubMed

Slater, Helen; Briggs, Andrew; Stinson, Jennifer; Campbell, Jared M

2017-08-01

The objective of this review is to systematically identify, review and synthesize relevant qualitative research on end user and implementer experiences of mobile health (mHealth) technologies developed for noncommunicable chronic disease management in young adults. "End users" are defined as young people aged 15-24 years, and "implementers" are defined as health service providers, clinicians, policy makers and administrators.The two key questions we wish to systematically explore from identified relevant qualitative studies or studies with qualitative components are.

Evolution of the US energy system and related emissions under varying social and technological development paradigms: Plausible scenarios for use in robust decision making.

PubMed

Brown, Kristen E; Hottle, Troy Alan; Bandyopadhyay, Rubenka; Babaee, Samaneh; Dodder, Rebecca Susanne; Kaplan, Pervin Ozge; Lenox, Carol; Loughlin, Dan

2018-06-21

The energy system is the primary source of air pollution. Thus, evolution of the energy system into the future will affect society's ability to maintain air quality. Anticipating this evolution is difficult because of inherent uncertainty in predicting future energy demand, fuel use, and technology adoption. We apply Scenario Planning to address this uncertainty, developing four very different visions of the future. Stakeholder engagement suggested technological progress and social attitudes toward the environment are critical and uncertain factors for determining future emissions. Combining transformative and static assumptions about these factors yields a matrix of four scenarios that encompass a wide range of outcomes. We implement these scenarios in the U.S. EPA MARKAL model. Results suggest that both shifting attitudes and technology transformation may lead to emission reductions relative to present, even without additional policies. Emission caps, such as the Cross State Air Pollution Rule, are most effective at protecting against future emission increases. An important outcome of this work is the scenario implementation approach, which uses technology-specific discount rates to encourage scenario-specific technology and fuel choices. End-use energy demands are modified to approximate societal changes. This implementation allows the model to respond to perturbations in manners consistent with each scenario.

The Principal as Technology Leader.

ERIC Educational Resources Information Center

Creighton, Theodore

This book explores the complexities of change and implementation of technology in schools. It looks at current research while providing guidelines to development and planning, and includes sample technology plans. In addition, the book highlights instructional leadership and curriculum, the digital divide between needs and availability, needs…

Development of Pre-Service Teachers' Information and Communication Technology (ICT) in Education Competencies in a Mainland Chinese University

ERIC Educational Resources Information Center

Lim, Cher Ping; Yan, Hanbing; Xiong, Xibei

2015-01-01

This paper examines how the design and implementation of a core teacher education course develops pre-service teachers' information communication technology (ICT) in education competencies in a mainland Chinese university. This course adopted a four-component instructional design system to develop its curriculum, incorporated an inquiry-based…

Development and Evaluation of Senior High School Courses on Emerging Technology: A Case Study of a Course on Virtual Reality

ERIC Educational Resources Information Center

Chen, Chi-Tung

2012-01-01

In Taiwan, the National Science Council has implemented the High Scope Program (HSP) since 2006. The purpose of this study was to analyze the development and effectiveness of senior high school HSP courses on emerging technology. This study used a course on virtual reality as an example, to investigate the influence of emerging technology courses…

Is technology the best medicine? Three practice theoretical perspectives on medication administration technologies in nursing.

PubMed

Boonen, Marcel Jmh; Vosman, Frans Jh; Niemeijer, Alistair R

2016-06-01

Even though it is often presumed that the use of technology like medication administration technology is both safer and more effective, the importance of nurses' know-how is not to be underestimated. In this article, we accordingly try to argue that nurses' labor, including their different forms of knowledge, must play a crucial role in the development, implementation and use of medication administration technology. Using three different theoretical perspectives ('heuristic lenses') and integrating this with our own ethnographic research, we will explore how nursing practices change through the use of medication technology. Ultimately, we will argue that ignoring (institutional) complexity and the various types of important knowledge that nurses have, will seriously complicate the implementation of medication administration technology. © 2015 John Wiley & Sons Ltd.

Development of advanced technological systems for accelerator transmutation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Batskikh, G.I.; Bondarev, B.I.; Durkin, A.P.

1995-10-01

A development concept of the accelerator nuclear energy reactors is considered for energy generation and nuclear power plant waste conversion into short-lived nuclides along with the requirements imposed on the technological systems necessary for implementation of such projects. The state of art in the field is discussed.

Tiered Internship Model for Undergraduate Students in Geospatial Science and Technology

ERIC Educational Resources Information Center

Kopteva, Irina A.; Arkowski, Donna; Craft, Elaine L.

2015-01-01

This article discusses the development, implementation, and evaluation of a tiered internship program for undergraduate students in geospatial science and technology (TIMSGeoTech). The internship program assists education programs in providing skill development that is relevant and useful, and it aligns graduates and their skills with industry…

DFT algorithms for bit-serial GaAs array processor architectures

NASA Technical Reports Server (NTRS)

Mcmillan, Gary B.

1988-01-01

Systems and Processes Engineering Corporation (SPEC) has developed an innovative array processor architecture for computing Fourier transforms and other commonly used signal processing algorithms. This architecture is designed to extract the highest possible array performance from state-of-the-art GaAs technology. SPEC's architectural design includes a high performance RISC processor implemented in GaAs, along with a Floating Point Coprocessor and a unique Array Communications Coprocessor, also implemented in GaAs technology. Together, these data processors represent the latest in technology, both from an architectural and implementation viewpoint. SPEC has examined numerous algorithms and parallel processing architectures to determine the optimum array processor architecture. SPEC has developed an array processor architecture with integral communications ability to provide maximum node connectivity. The Array Communications Coprocessor embeds communications operations directly in the core of the processor architecture. A Floating Point Coprocessor architecture has been defined that utilizes Bit-Serial arithmetic units, operating at very high frequency, to perform floating point operations. These Bit-Serial devices reduce the device integration level and complexity to a level compatible with state-of-the-art GaAs device technology.

Electronic health records implementation: an evaluation of information system impact and contingency factors.

PubMed

Nguyen, Lemai; Bellucci, Emilia; Nguyen, Linh Thuy

2014-11-01

This paper provides a review of EHR (electronic health record) implementations around the world and reports on findings including benefits and issues associated with EHR implementation. A systematic literature review was conducted from peer-reviewed scholarly journal publications from the last 10 years (2001-2011). The search was conducted using various publication collections including: Scopus, Embase, Informit, Medline, Proquest Health and Medical Complete. This paper reports on our analysis of previous empirical studies of EHR implementations. We analysed data based on an extension of DeLone and McLean's information system (IS) evaluation framework. The extended framework integrates DeLone and McLean's dimensions, including information quality, system quality, service quality, intention of use and usage, user satisfaction and net benefits, together with contingent dimensions, including systems development, implementation attributes and organisational aspects, as identified by Van der Meijden and colleagues. A mix of evidence-based positive and negative impacts of EHR was found across different evaluation dimensions. In addition, a number of contingent factors were found to contribute to successful implementation of EHR. This review does not include white papers or industry surveys, non-English papers, or those published outside the review time period. This review confirms the potential of this technology to aid patient care and clinical documentation; for example, in improved documentation quality, increased administration efficiency, as well as better quality, safety and coordination of care. Common negative impacts include changes to workflow and work disruption. Mixed observations were found on EHR quality, adoption and satisfaction. The review warns future implementers of EHR to carefully undertake the technology implementation exercise. The review also informs healthcare providers of contingent factors that potentially affect EHR development and implementation in an organisational setting. Our findings suggest a lack of socio-technical connectives between the clinician, the patient and the technology in developing and implementing EHR and future developments in patient-accessible EHR. In addition, a synthesis of DeLone and McLean's framework and Van der Meijden and colleagues' contingent factors has been found useful in comprehensively understanding and evaluating EHR implementations. Crown Copyright © 2014. Published by Elsevier Ireland Ltd. All rights reserved.

RFID in healthcare: a Six Sigma DMAIC and simulation case study.

PubMed

Southard, Peter B; Chandra, Charu; Kumar, Sameer

2012-01-01

The purpose of this paper is to develop a business model to generate quantitative evidence of the benefits of implementing radio frequency identification (RFID) technology, limiting the scope to outpatient surgical processes in hospitals. The study primarily uses the define-measure-analyze-improve-control (DMAIC) approach, and draws on various analytical tools such as work flow diagrams, value stream mapping, and discrete event simulation to examine the effect of implementing RFID technology on improving effectiveness (quality and timeliness) and efficiency (cost reduction) of outpatient surgical processes. The analysis showed significant estimated annual cost and time savings in carrying out patients' surgical procedures with RFID technology implementation for the outpatient surgery processes in a hospital. This is largely due to the elimination of both non-value added activities of locating supplies and equipment and also the elimination of the "return" loop created by preventable post operative infections. Several poka-yokes developed using RFID technology were identified to eliminate those two issues. Several poka-yokes developed using RFID technology were identified for improving the safety of the patient and cost effectiveness of the operation to ensure the success of the outpatient surgical process. Many stakeholders in the hospital environment will be impacted including patients, physicians, nurses, technicians, administrators and other hospital personnel. Different levels of training of hospital personnel will be required, based on the degree of interaction with the RFID system. Computations of costs and savings will help decision makers understand the benefits and implications of the technology in the hospital environment.

System design analyses of a rotating advanced-technology space station for the year 2025

NASA Technical Reports Server (NTRS)

Queijo, M. J.; Butterfield, A. J.; Cuddihy, W. F.; Stone, R. W.; Wrobel, J. R.; Garn, P. A.; King, C. B.

1988-01-01

Studies of an advanced technology space station configured to implement subsystem technologies projected for availability in the time period 2000 to 2025 is documented. These studies have examined the practical synergies in operational performance available through subsystem technology selection and identified the needs for technology development. Further analyses are performed on power system alternates, momentum management and stabilization, electrothermal propulsion, composite materials and structures, launch vehicle alternates, and lunar and planetary missions. Concluding remarks are made regarding the advanced technology space station concept, its intersubsystem synergies, and its system operational subsystem advanced technology development needs.

Interactions of technology and society: Impacts of improved airtransport. A study of airports at the grass roots. [in rural communities

NASA Technical Reports Server (NTRS)

Laporte, T.; Rosenthal, S.; Ross, S.; Lee, K. N.; Levine, E.

1977-01-01

The feasibility of applying a particular conception of technology and social change to specific examples of technological development was investigated. The social and economic effects of improved airport capabilities on rural communities were examined. Factors which led to the successful implementation of a plan to construct sixty small airports in Ohio are explored and implications derived for forming public policies, evaluating air transportation development, and assessing technology.

UK Health and Social Care Case Studies: Iterative Technology Development.

PubMed

Blanchard, Adie; Gilbert, Laura; Dawson, Tom

2017-01-01

As a result of increasing demand in the face of reducing resources, technology has been implemented in many social and health care services to improve service efficiency. This paper outlines the experiences of deploying a 'Software as a Service' application in the UK social and health care sectors. The case studies demonstrate that every implementation is different, and unique to each organisation. Technology design and integration can be facilitated by ongoing engagement and collaboration with all stakeholders, flexible design, and attention to interoperability to suit services and their workflows.

The Smart Floor: How a Public-Private Partnership co-developed a heterogeneous healthcare technology system.

PubMed

Brodersen, Søsser; Lindegaard, Hanne

2015-01-01

Currently, a wide variety of healthcare technologies are being implemented in private homes, hospitals, nursing homes, etc. with the triple aim of improving people's health, improving the quality of care, and reducing costs related to healthcare services. In this chapter, we discuss how different actors in a public-private partnership co-developed a heterogeneous system around the Smart Floor to ensure that both new healthcare practices and residents' routines were inscribed into the new healthcare technology. We argue that implementing the Smart Floor was not just a question of buying a technology and integrating it during construction-it required co-development with the healthcare staff. The floor is more than a technology placed under the floor surface in a resident's apartment; rather, it is a heterogeneous network of human and non-human actors communicating with each other. In this chapter, we illustrate how the heterogeneous technological system was co-developed and redesigned during knowledge sharing processes with companies, lead-users, and healthcare staff. We also discuss how care practices have changed as a result of the Smart Floor system. In particular, healthcare staff members no longer feel a need to disturb elderly residents with routine in-person checks. Domesticating the technologies for different groups of actors required not only coordinating communication among sensors, the interface, the portable nurse call (smartphones), and alarms, but also accepting the use of surveillance technology.

Implementing Innovation: An Exploration of a Learning Management System Transition

ERIC Educational Resources Information Center

Strawser, Michael G.; Apostel, Shawn; O' Keefe, Moira; Simons, Crystal

2018-01-01

Learning management systems (LMS) are fixtures on higher education campuses. As LMS use continues to increase, faculty development professionals should consider how system use is encouraged and implemented on campus, especially amongst faculty. Using Ely's (1990) technology-specific conditions that facilitate the implementation of an innovation,…

High School/High Tech Program Guide: An Implementation Guide for High School/High Tech Program Coordinators. Promoting Careers in Science and Technology for High School Students with Disabilities.

ERIC Educational Resources Information Center

Office of Disability Employment Policy (DOL), Washington, DC.

This implementation guide is intended to assist educators in planning, establishing, building, and managing a High School/High Tech project for high school students with disabilities. The program is designed to develop career opportunities, provide activities that will spark an interest in high technology fields, and encourage students to pursue…

Implementing Effective Mission Systems Engineering Practices During Early Project Formulation Phases

NASA Technical Reports Server (NTRS)

Moton, Tryshanda

2016-01-01

Developing and implementing a plan for a NASA space mission can be a complicated process. The needs, goals, and objectives of any proposed mission or technology must be assessed early in the Project Life Cycle. The key to successful development of a space mission or flight project is the inclusion of systems engineering in early project formulation, namely during Pre-phase A, Phase A, and Phase B of the NASA Project Life Cycle. When a space mission or new technology is in pre-development, or "pre-Formulation", feasibility must be determined based on cost, schedule, and risk. Inclusion of system engineering during project formulation is key because in addition to assessing feasibility, design concepts are developed and alternatives to design concepts are evaluated. Lack of systems engineering involvement early in the project formulation can result in increased risks later in the implementation and operations phases of the project. One proven method for effective systems engineering practice during the pre-Formulation Phase is the use of a mission conceptual design or technology development laboratory, such as the Mission Design Lab (MDL) at NASA's Goddard Space Flight Center (GSFC). This paper will review the engineering process practiced routinely in the MDL for successful mission or project development during the pre-Formulation Phase.

Evaluative Case Study of the Effectiveness of Professional Development Elements When Implementing a Learning Management System in Elementary Education

ERIC Educational Resources Information Center

Beams, Tara E.

2017-01-01

As school districts across the country attempt to comply with federal and state mandates to effectively integrate technology into today's teaching and learning, they must face the challenge of also developing professional development plans which will adequately and successfully prepare teachers for implementing these new resources and these new…

"Handy Manny" and the Emergent Literacy Technology Toolkit

ERIC Educational Resources Information Center

Hourcade, Jack J.; Parette, Howard P., Jr.; Boeckmann, Nichole; Blum, Craig

2010-01-01

This paper outlines the use of a technology toolkit to support emergent literacy curriculum and instruction in early childhood education settings. Components of the toolkit include hardware and software that can facilitate key emergent literacy skills. Implementation of the comprehensive technology toolkit enhances the development of these…

75 FR 10439 - Cognitive Radio Technologies and Software Defined Radios

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-08

... Technologies and Software Defined Radios AGENCY: Federal Communications Commission. ACTION: Final rule. SUMMARY... concerning the use of open source software to implement security features in software defined radios (SDRs... ongoing technical developments in cognitive and software defined radio (SDR) technologies. 2. On April 20...

Autonomous aircraft initiative study

NASA Technical Reports Server (NTRS)

Hewett, Marle D.

1991-01-01

The results of a consulting effort to aid NASA Ames-Dryden in defining a new initiative in aircraft automation are described. The initiative described is a multi-year, multi-center technology development and flight demonstration program. The initiative features the further development of technologies in aircraft automation already being pursued at multiple NASA centers and Department of Defense (DoD) research and Development (R and D) facilities. The proposed initiative involves the development of technologies in intelligent systems, guidance, control, software development, airborne computing, navigation, communications, sensors, unmanned vehicles, and air traffic control. It involves the integration and implementation of these technologies to the extent necessary to conduct selected and incremental flight demonstrations.

Online Argumentation Implementation in the Development of Critical Thinking Disposition

ERIC Educational Resources Information Center

Fettahlioglu, Pinar; Kaleci, Devkan

2018-01-01

The purpose of this study is to investigate the effects of teaching technologies and material development course taught through Moodle based online argumentation implementation on critical thinking disposition of third year science teacher candidates. The study was carried out with a total of 43 students consisting of an experimental group of 22…

Improving Access Using Simulations of Community Resources.

ERIC Educational Resources Information Center

Germann, Clark; Broida, Jane Kaufman; Broida, Jeffrey M.; Thompson, Kimberly

The Community Access Through Technology Project (CATT) is developing and implementing virtual reality software that persons with disabilities can use to experience a physical location prior to visiting it in person. A virtual scenario of one physical location has been developed, implemented, and tested, and work is underway on two others. Using a…

Student Response Systems for Formative Assessment: Literature-Based Strategies and Findings from a Middle School Implementation

ERIC Educational Resources Information Center

Fuller, Julia S.; Dawson, Kara M.

2017-01-01

In this article we share how a district-level technology integration specialist used literature on implementing student response systems (SRS) for formative assessment, based on Desimone's (2009) core features of professional development design, Guskey's Levels of Professional Development Evaluation (1998, 2000, 2002), and Danielson's Observation…

Climate Action Planning Process | Climate Neutral Research Campuses | NREL

Science.gov Websites

Action Planning Process Climate Action Planning Process For research campuses, NREL has developed a five-step process to develop and implement climate action plans: Determine baseline energy consumption Analyze technology options Prepare a plan and set priorities Implement the climate action plan Measure and

Biotechnology at the University of Toledo: Development and Implementation of an Integrated Curriculum.

ERIC Educational Resources Information Center

Hudson, Richard A.

1988-01-01

The University of Toledo College of Pharmacy has, over a four-year period, developed and implemented a biotechnology program that has been fully integrated into the professional division of the undergraduate program. Addition of new technologies provides an increasingly coherent curriculum stressing the value of ideas. (MSE)

Research on Green Construction Technology Applied at Guangzhou Hongding Building Project

NASA Astrophysics Data System (ADS)

Lou, Yong Zhong

2018-06-01

The green construction technology is the embodiment of sustainable development strategy in the construction industry, and it is a new construction mode which requires a higher environmental protection. Based on the Hongding building project, this paper describes the application and innovation of technical in the process of implementing green construction in the project, as well as the difficulties and characteristics in the specific practice; .The economic and social benefits of green construction are compared to the traditional construction model; .The achievements and experience of the green construction technology are summarized in the project; The ideas and methods in the process of implementing green construction are abstracted; some suggestions are put forward for the development of green construction.

Convention on the rights of persons with disabilities, assistive technology and information and communication technology requirements: where do we stand on implementation?

PubMed

Gould, Martin; Leblois, Axel; Cesa Bianchi, Francesca; Montenegro, Viviana

2015-07-01

This article presents 2013 data from a survey provided by G3ict and Disabled Peoples International (DPI). The Progress Report identifies the degree that each of the CRPD dispositions on ATs and ICTs accessibility are enacted in local laws, policies and regulations and their impacts. The initial methodology used to develop the survey involved several steps. First, a systematic review of CRPD AT and ICT technology requirements was conducted. Second, 57 variables were identified. Third, variables were grouped into three clusters representing countries': (a) legal, regulatory and programmatic commitments; (b) capacity to implement; and (c) actual implementation results. Surveys were completed by experts in a total of 74 countries. With respect to select CRPD AT and ICT dispositions, respondent countries report an: (a) average degree of compliance within their general legal and regulatory framework at 66%; (b) average 29% of the capacity to implement; and (c) average degree of implementation and impact of 42%. Implications for Rehabilitation Survey results reflect low levels of ratifying countries implementation of laws, policies or programs that promote awareness-raising and training programs about the CRPD and its AT and ICT technology requirements. Implication 1: CRPD ratifying countries need to promote disability-inclusive AT and ICT policies and programs identified as priority areas by key stakeholders Implication 2: Government leaders and key policymakers need to address gaps in capacity building such as professional training of professionals in the areas of AT and ICT accessibility and programming through disability-inclusive cooperative development practices.

Best ITS management practices and technologies for Ohio : research implementation plan.

DOT National Transportation Integrated Search

2001-07-01

In developing its intelligent transportation systems (ITS) program, the Ohio Department of Transportation sought to : determine the best management practices and technologies being deployed by other departments of transportation : across the country....

77 FR 52105 - Announcement of the Innovation in Arms Control Challenge Under the America Competes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

...,'' with the goal of spurring innovation, and developing scientific and technological options that will... transparency efforts. Processes, incentives, and technologies must, in theory, be practical and implementable...

Bridge Scour Technology Transfer

DOT National Transportation Integrated Search

2018-01-24

Scour and flooding are the leading causes of bridge failures in the United States and therefore should be monitored. New applications of tools and technologies are being developed, tested, and implemented to reduce bridge scour risk. The National Coo...

Technology scan for electronic toll collection.

DOT National Transportation Integrated Search

2008-06-01

The purpose of this project was to identify and assess available technologies and methodologies for electronic toll collection (ETC) and to develop recommendations for the best way(s) to implement toll collection in the Louisville metropolitan area. ...

Reusable Rocket Engine Advanced Health Management System. Architecture and Technology Evaluation: Summary

NASA Technical Reports Server (NTRS)

Pettit, C. D.; Barkhoudarian, S.; Daumann, A. G., Jr.; Provan, G. M.; ElFattah, Y. M.; Glover, D. E.

1999-01-01

In this study, we proposed an Advanced Health Management System (AHMS) functional architecture and conducted a technology assessment for liquid propellant rocket engine lifecycle health management. The purpose of the AHMS is to improve reusable rocket engine safety and to reduce between-flight maintenance. During the study, past and current reusable rocket engine health management-related projects were reviewed, data structures and health management processes of current rocket engine programs were assessed, and in-depth interviews with rocket engine lifecycle and system experts were conducted. A generic AHMS functional architecture, with primary focus on real-time health monitoring, was developed. Fourteen categories of technology tasks and development needs for implementation of the AHMS were identified, based on the functional architecture and our assessment of current rocket engine programs. Five key technology areas were recommended for immediate development, which (1) would provide immediate benefits to current engine programs, and (2) could be implemented with minimal impact on the current Space Shuttle Main Engine (SSME) and Reusable Launch Vehicle (RLV) engine controllers.

IVS Technology Coordinator Report

NASA Technical Reports Server (NTRS)

Whitney, Alan

2013-01-01

This report of the Technology Coordinator includes the following: 1) continued work to implement the new VLBI2010 system, 2) the 1st International VLBI Technology Workshop, 3) a VLBI Digital- Backend Intercomparison Workshop, 4) DiFX software correlator development for geodetic VLBI, 5) a review of progress towards global VLBI standards, and 6) a welcome to new IVS Technology Coordinator Bill Petrachenko.

Implementation Costs for Educational Technology Systems. Issue Trak: A CEFPI Brief on Educational Facility Issues.

ERIC Educational Resources Information Center

Meeks, Glenn E.; Fisher, Ricki; Loveless, Warren

Personnel involved in planning or developing schools lack the costing tools that will enable them to determine educational technology costs. This report presents an overview of the technology costing process and the general costs used in estimating educational technology systems on a macro-budget basis, along with simple cost estimates for…

Empowering Technology and POETRY Supporting Scientific Inquiry: Investigating the Motion of a Rebounding Trolley

ERIC Educational Resources Information Center

Urban-Woldron, Hildegard

2012-01-01

The recent implementation of technology in the classroom is probably one of the most challenging innovations that many teachers are having to confront today. Teachers have to develop a knowledge base that goes beyond technology proficiency, into learning about how technology, for example, can be used for various forms of representations of subject…

FAILSAFE Health Management for Embedded Systems

NASA Technical Reports Server (NTRS)

Horvath, Gregory A.; Wagner, David A.; Wen, Hui Ying; Barry, Matthew

2010-01-01

The FAILSAFE project is developing concepts and prototype implementations for software health management in mission- critical, real-time embedded systems. The project unites features of the industry-standard ARINC 653 Avionics Application Software Standard Interface and JPL s Mission Data System (MDS) technology (see figure). The ARINC 653 standard establishes requirements for the services provided by partitioned, real-time operating systems. The MDS technology provides a state analysis method, canonical architecture, and software framework that facilitates the design and implementation of software-intensive complex systems. The MDS technology has been used to provide the health management function for an ARINC 653 application implementation. In particular, the focus is on showing how this combination enables reasoning about, and recovering from, application software problems.

Progress towards autonomous, intelligent systems

NASA Technical Reports Server (NTRS)

Lum, Henry; Heer, Ewald

1987-01-01

An aggressive program has been initiated to develop, integrate, and implement autonomous systems technologies starting with today's expert systems and evolving to autonomous, intelligent systems by the end of the 1990s. This program includes core technology developments and demonstration projects for technology evaluation and validation. This paper discusses key operational frameworks in the content of systems autonomy applications and then identifies major technological challenges, primarily in artificial intelligence areas. Program content and progress made towards critical technologies and demonstrations that have been initiated to achieve the required future capabilities in the year 2000 era are discussed.

Conceptualizing Student Affect for Science and Technology at the Middle School Level: Development and Implementation of a Measure of Affect in Science and Technology (MAST)

ERIC Educational Resources Information Center

Romine, William L.; Sadler, Troy D.; Wulff, Eric P.

2017-01-01

We describe the development of the Measure of Affect in Science and Technology (MAST), and study its usefulness for measuring science affect in middle school students via both classical and Rasch measurement perspectives. We then proceed to utilize the measurement structure of the MAST to understand how middle school students at varying levels of…

GSFC Technology Development Center Report

NASA Technical Reports Server (NTRS)

Himwich, Ed; Gipson, John

2013-01-01

This report summarizes the activities of the GSFC Technology Development Center (TDC) for 2012 and forecasts planned activities for 2013. The GSFC TDC develops station software including the Field System (FS), scheduling software (SKED), hardware including tools for station timing and meteorology, scheduling algorithms, and operational procedures. It provides a pool of individuals to assist with station implementation, check-out, upgrades, and training.

Effective Use of Assistive Technologies for Inclusive Education in Developing Countries: Issues and Challenges from Two Case Studies

ERIC Educational Resources Information Center

Grönlund, Åke; Lim, Nena; Larsson, Hannu

2010-01-01

Developing countries face many obstacles in the process of implementing inclusive education (IE). Effective use of assistive technologies (AT) can help governments in developing countries achieve inclusive education by helping children with disabilities in schools. Despite the importance and positive impact of AT, prior research on the use of AT…

Designing and Implementing a Science, Technology and Innovation Policy in a Developing Country: Recent Experience from Nigeria

ERIC Educational Resources Information Center

Siyanbola, W. O.; Olaopa, O. R.; Hassan, O. M.

2013-01-01

The authors examine how a realistic science, technology and innovation policy can be formulated to enhance the development and management of a nation's physical and human assets and to accelerate socio-economic development through focused S&T engagement. The paper traces the evolution of S&T policies in Nigeria, particularly between 1986…

Pediatric eMental healthcare technologies: a systematic review of implementation foci in research studies, and government and organizational documents.

PubMed

Gehring, Nicole D; McGrath, Patrick; Wozney, Lori; Soleimani, Amir; Bennett, Kathryn; Hartling, Lisa; Huguet, Anna; Dyson, Michele P; Newton, Amanda S

2017-06-21

Researchers, healthcare planners, and policymakers convey a sense of urgency in using eMental healthcare technologies to improve pediatric mental healthcare availability and access. Yet, different stakeholders may focus on different aspects of implementation. We conducted a systematic review to identify implementation foci in research studies and government/organizational documents for eMental healthcare technologies for pediatric mental healthcare. A search of eleven electronic databases and grey literature was conducted. We included research studies and documents from organization and government websites if the focus included eMental healthcare technology for children/adolescents (0-18 years), and implementation was studied and reported (research studies) or goals/recommendations regarding implementation were made (documents). We assessed study quality using the Mixed Methods Appraisal Tool and document quality using the Appraisal of Guidelines for Research & Evaluation II. Implementation information was grouped according to Proctor and colleagues' implementation outcomes-acceptability, adoption, appropriateness, cost, feasibility, fidelity, penetration, and sustainability-and grouped separately for studies and documents. Twenty research studies and nine government/organizational documents met eligibility criteria. These articles represented implementation of eMental healthcare technologies in the USA (14 studies), United Kingdom (2 documents, 3 studies), Canada (2 documents, 1 study), Australia (4 documents, 1 study), New Zealand (1 study), and the Netherlands (1 document). The quality of research studies was excellent (n = 11), good (n = 6), and poor (n = 1). These eMental health studies focused on the acceptability (70%, n = 14) and appropriateness (50%, n = 10) of eMental healthcare technologies to users and mental healthcare professionals. The quality of government and organizational documents was high (n = 2), medium (n = 6), and low (n = 1). These documents focused on cost (100%, n = 9), penetration (89%, n = 8), feasibility (78%, n = 7), and sustainability (67%, n = 6) of implementing eMental healthcare technology. To date, research studies have largely focused on acceptability and appropriateness, while government/organizational documents state goals and recommendations regarding costs, feasibility, and sustainability of eMental healthcare technologies. These differences suggest that the research evidence available for pediatric eMental healthcare technologies does not reflect the focus of governments and organizations. Partnerships between researchers, healthcare planners, and policymakers may help to align implementation research with policy development, decision-making, and funding foci.

Design and implementation of information visualization system on science and technology industry based on GIS

NASA Astrophysics Data System (ADS)

Wu, Xiaofang; Jiang, Liushi

2011-02-01

Usually in the traditional science and technology information system, the only text and table form are used to manage the data, and the mathematic statistics method is applied to analyze the data. It lacks for the spatial analysis and management of data. Therefore, GIS technology is introduced to visualize and analyze the information data on science and technology industry. Firstly, by using the developed platform-microsoft visual studio 2005 and ArcGIS Engine, the information visualization system on science and technology industry based on GIS is built up, which implements various functions, such as data storage and management, inquiry, statistics, chart analysis, thematic map representation. It can show the change of science and technology information from the space and time axis intuitively. Then, the data of science and technology in Guangdong province are taken as experimental data and are applied to the system. And by considering the factors of humanities, geography and economics so on, the situation and change tendency of science and technology information of different regions are analyzed and researched, and the corresponding suggestion and method are brought forward in order to provide the auxiliary support for development of science and technology industry in Guangdong province.

ACTS Operational Performance Review: September 1995

NASA Technical Reports Server (NTRS)

Krawczyk, Richard J.

1996-01-01

The Advanced Communications Technology Satellite (ACTS) utilized a proven spacecraft bus with a payload that qualified new technologies to provide a wide range of on-orbit demonstrations. A comprehensive development, qualification and ground test program was implemented to reduce technology risks. Since launch in September, 1993, and insertion into its geostationary slot ACTS has accumulated over 16,000 hours of successful operation. This paper briefly reviews the technology development background then provides a summary of the operational performance observed for the spacecraft bus and communication payload subsystems and units.

'Emerging technologies for the changing global market' - Prioritization methodology for chemical replacement

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semiquantitative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Emerging technologies for the changing global market

NASA Technical Reports Server (NTRS)

Cruit, Wendy; Schutzenhofer, Scott; Goldberg, Ben; Everhart, Kurt

1993-01-01

This project served to define an appropriate methodology for effective prioritization of technology efforts required to develop replacement technologies mandated by imposed and forecast legislation. The methodology used is a semi-quantative approach derived from quality function deployment techniques (QFD Matrix). This methodology aims to weight the full environmental, cost, safety, reliability, and programmatic implications of replacement technology development to allow appropriate identification of viable candidates and programmatic alternatives. The results will be implemented as a guideline for consideration for current NASA propulsion systems.

Concept of JINR Corporate Information System

NASA Astrophysics Data System (ADS)

Filozova, I. A.; Bashashin, M. V.; Korenkov, V. V.; Kuniaev, S. V.; Musulmanbekov, G.; Semenov, R. N.; Shestakova, G. V.; Strizh, T. A.; Ustenko, P. V.; Zaikina, T. N.

2016-09-01

The article presents the concept of JINR Corporate Information System (JINR CIS). Special attention is given to the information support of scientific researches - Current Research Information System as a part of the corporate information system. The objectives of such a system are focused on ensuring an effective implementation and research by using the modern information technology, computer technology and automation, creation, development and integration of digital resources on a common conceptual framework. The project assumes continuous system development, introduction the new information technologies to ensure the technological system relevance.

Mars Technology Program Planetary Protection Technology Development

NASA Technical Reports Server (NTRS)

Lin, Ying

2006-01-01

The objectives of the NASA Planetary Protection program are to preserve biological and organic conditions of solar-system bodies for future scientific exploration and to protect the Earth from potential hazardous extraterrestrial contamination. As the exploration of solar system continues, NASA remains committed to the implementation of planetary protection policy and regulations. To fulfill this commitment, the Mars Technology Program (MTP) has invested in a portfolio of tasks for developing necessary technologies to meet planetary protection requirements for the next decade missions.

Educational Technology: Definition of the Problem.

ERIC Educational Resources Information Center

Razavi, Hossein

1978-01-01

An analysis of the evolution of educational technology demonstrates that the expansion of the concept has been unavoidable. A definition of educational technology as an economic approach to the micro and macro planning of education is introduced, and problems and guidelines for implementation in developing countries are discussed. (Author/JEG)

Technology as Mediation Tool for Improving Teaching Profession in Higher Education Practices

ERIC Educational Resources Information Center

Altinay-Gazi, Zehra; Altinay-Aksal, Fahriye

2017-01-01

Technology became a mediation tool for forming information and developing skills is teacher education programs of higher education institutions because technological tools can be used for self-reflection of prospective teachers' teaching performances. Practical implementation of teacher education programmes is a part of quality indicator in higher…

Technological Advances in the Treatment of Trauma: A Review of Promising Practices

ERIC Educational Resources Information Center

Paul, Lisa A.; Hassija, Christina M.; Clapp, Joshua D.

2012-01-01

Given the availability of empirically supported practices for addressing posttraumatic stress disorder and other forms of trauma-related distress, the development and implementation of new technology to deliver these treatments is exciting. Technological innovations in this literature aim to expand availability of empirically based intervention,…

Capability Building in Educational Technology for Teachers in China

ERIC Educational Resources Information Center

Jun, Han; Zhuzhu, Wang

2010-01-01

This paper gives a brief introduction to the project called Education Technology Capacity Building Plan for All Primary and Secondary Teachers now being implemented in China. Because information and communication technology skills training cannot match the demand of teachers' professional development, the Chinese Ministry of Education established…

Developing a Bachelor's Program in Health Information Technology

ERIC Educational Resources Information Center

Howard, Elizabeth V.; Bishop-Clark, Cathy; Evans, Donna M.; Rose, Anthony W.

2013-01-01

There is little doubt that the healthcare industry is experiencing tremendous growth in regards to technology. If you have visited a healthcare professional recently, you may have seen a similar notice, "Please be patient as we implement a new electronic healthcare record system." This confluence of technology and healthcare provides a…

Investigating Faculty Technology Mentoring as a University-Wide Professional Development Model

ERIC Educational Resources Information Center

Baran, Evrim

2016-01-01

A growing and increasingly important area of research in higher education is the investigation of how different forms of support and training programs facilitate faculty adoption of technology into pedagogical practices. This study explored the implementation of a faculty technology mentoring (FTM) program as a university-wide professional…

Technology Education: A Perspective on Implementation.

ERIC Educational Resources Information Center

International Technology Education Association, Reston, VA.

This monograph has been developed to give educators a broad perspective of the technology education emphasis that is becoming prevalent in schools today, replacing industrial arts. The report is organized in four sections. The first section presents an overview of education in a highly sophisticated technological society. This section contains the…

Consider the Four-Legged Stool as You Plan for Information Technology.

ERIC Educational Resources Information Center

Baltzer, Jan A.

2000-01-01

Discusses the need for strategic planning in libraries for the use of information technology that will add value to the library and better serve the users. Explains a model for developing information technology strategic plans that includes vision statements, goals and strategies, and an implementation timeline. (LRW)

Technology Education In Australia: National Policy and State Implementation.

ERIC Educational Resources Information Center

Gardner, Paul L.

This paper reviews a decade of development of technology education at the secondary school level in Australia. It traces the influences, both national and international, which have pressed the nation's education systems to introduce technology studies into the school curriculum. The increasing globalization, the movement of capital and labor, the…

Challenges Facing Adoption of Information Communication Technology in African Universities

ERIC Educational Resources Information Center

Murgor, Titus Kiptoo

2015-01-01

A significant number of the universities and higher educational institutions have adopted the latest technology and implemented it productively, for the development of skilled human resource in respective area of specialization, as part of their responsibility. Information and communication Technology (ICT) has grown tremendously around the globe…

Students' Attitudes toward Gene Technology: Deconstructing a Construct

ERIC Educational Resources Information Center

Gardner, Grant E.; Troelstrup, Angelique

2015-01-01

Emergent technologies are commonly characterized as involving cutting-edge developments while lacking wide-scale public implementation. Although currently prevalent in many applications, gene technology is often considered emergent in that the science changes so rapidly. Science educators at all levels of formal education are faced with a unique…

Intersatellite Link (ISL) application to commercial communications satellites. Volume 1: Executive summary

NASA Technical Reports Server (NTRS)

Young, S. Lee

1987-01-01

Based on a comprehensive evaluation of the fundamental Intersatellite Link (ISL) systems characteristics, potential applications of ISLs to domestic, regional, and global commercial satellite communications were identified, and their cost-effectiveness and other systems benefits quantified wherever possible. Implementation scenarios for the cost-effective communications satellite systems employing ISLs were developed for the first launch in 1993 to 1994 and widespread use of ISLs in the early 2000's. Critical technology requirements for both the microwave (60 GHz) and optical (0.85 micron) ISL implementations were identified, and their technology development programs, including schedule and cost estimates, were derived.

NASA-Langley Research Center's Aircraft Condition Analysis and Management System Implementation

NASA Technical Reports Server (NTRS)

Frye, Mark W.; Bailey, Roger M.; Jessup, Artie D.

2004-01-01

This document describes the hardware implementation design and architecture of Aeronautical Radio Incorporated (ARINC)'s Aircraft Condition Analysis and Management System (ACAMS), which was developed at NASA-Langley Research Center (LaRC) for use in its Airborne Research Integrated Experiments System (ARIES) Laboratory. This activity is part of NASA's Aviation Safety Program (AvSP), the Single Aircraft Accident Prevention (SAAP) project to develop safety-enabling technologies for aircraft and airborne systems. The fundamental intent of these technologies is to allow timely intervention or remediation to improve unsafe conditions before they become life threatening.

A Magnetically Suspended Wheel for a Miniature Gyro Made Using Planar Fabrication Technologies

NASA Technical Reports Server (NTRS)

Dauwalter, Charles R.

1996-01-01

The technical feasibility of a magnetically suspended rotating wheel for miniature gyro applications was investigated under a NASA SBIR contract. A concept for a configuration for a system of compact, lightweight magnetic actuators capable of generating the necessary suspension forces and fabrication using millimachining planar fabrication technologies was developed. Both capacitive and electromagnetic position sensing concepts were developed for implementing a closed loop control system for supporting the wheel. A finite difference technique, implemented in a spreadsheet environment, for analyzing the force characteristics of the actuator was used and the results verified with Finite Element Analysis.

Engaging Pre-Service Science Teachers to Act as Active Designers of Technology Integration: A MAGDAIRE Framework

ERIC Educational Resources Information Center

Chien, Yu-Ta; Chang, Chun-Yen; Yeh, Ting-Kuang; Chang, Kuo-En

2012-01-01

This paper describes our efforts in developing the MAGDAIRE framework (abbreviated from Modeled Analysis, Guided Development, Articulated Implementation, and Reflected Evaluation) to transform pre-service science teachers' roles in a teacher education course: moving pre-service teachers from the roles of passive users of technology, as they…

Implementation of Multimedia Technologies into the Educational Process in Developed Countries

ERIC Educational Resources Information Center

Sukhomudrenko, Yuliia

2016-01-01

In the context of information technology development of a society requirements to professional training of teachers and forming of their competencies are increasing. The need for provision of media education consistent with challenges of an information society, organization of pedagogues' in the field of media education training, based on media…

78 FR 74057 - Disapproval of State Implementation Plan Revisions; Clark County, Nevada

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-10

... technology-based standards should account for the practical realities of technology supports EPA's view that... section 110(a)(2)(A) through (M). In developing SIPs, states have broad authority to develop the mix of... a SIP must be met on a ``continuous'' basis, practical realities or circumstances may create...

Development of Distributed System for Electronic Business Based on Java-Technologies

ERIC Educational Resources Information Center

Kintonova, Aliya Zh.; Andassova, Bakkaisha Z.; Ermaganbetova, Madina A.; Maikibaeva, Elmira K.

2016-01-01

This paper describes the results of studies on the peculiarities of distributed information systems, and the research of distributed systems technology development. The paper also provides the results of the analysis of E-business market research in the Republic of Kazakhstan. The article briefly describes the implementation of a possible solution…

Pre-Service Teachers' TPACK Development and Conceptions through a TPACK-Based Course

ERIC Educational Resources Information Center

Durdu, Levent; Dag, Funda

2017-01-01

This study examines pre-service teachers' Technological Pedagogical Content Knowledge (TPACK) development and analyses their conceptions of learning and teaching with technology. With this aim in mind, researchers designed and implemented a computer-based mathematics course based on a TPACK framework. As a research methodology, a parallel mixed…

Exploring resistance to implementation of welfare technology in municipal healthcare services - a longitudinal case study.

PubMed

Nilsen, Etty R; Dugstad, Janne; Eide, Hilde; Gullslett, Monika Knudsen; Eide, Tom

2016-11-15

Industrialized and welfare societies are faced with vast challenges in the field of healthcare in the years to come. New technological opportunities and implementation of welfare technology through co-creation are considered part of the solution to this challenge. Resistance to new technology and resistance to change is, however, assumed to rise from employees, care receivers and next of kin. The purpose of this article is to identify and describe forms of resistance that emerged in five municipalities during a technology implementation project as part of the care for older people. This is a longitudinal, single-embedded case study with elements of action research, following an implementation of welfare technology in the municipal healthcare services. Participants included staff from the municipalities, a network of technology developers and a group of researchers. Data from interviews, focus groups and participatory observation were analysed. Resistance to co-creation and implementation was found in all groups of stakeholders, mirroring the complexity of the municipal context. Four main forms of resistance were identified: 1) organizational resistance, 2) cultural resistance, 3) technological resistance and 4) ethical resistance, each including several subforms. The resistance emerges from a variety of perceived threats, partly parallel to, partly across the four main forms of resistance, such as a) threats to stability and predictability (fear of change), b) threats to role and group identity (fear of losing power or control) and c) threats to basic healthcare values (fear of losing moral or professional integrity). The study refines the categorization of resistance to the implementation of welfare technology in healthcare settings. It identifies resistance categories, how resistance changes over time and suggests that resistance may play a productive role when the implementation is organized as a co-creation process. This indicates that the importance of organizational translation between professional cultures should not be underestimated, and supports research indicating that focus on co-initiation in the initial phase of implementation projects may help prevent different forms of resistance in complex co-creation processes.

A research project to develop and evaluate a technical education component on materials technology for orientation to space-age technology

NASA Technical Reports Server (NTRS)

Jacobs, J. A.

1976-01-01

A project was initiated to develop, implement, and evaluate a prototype component for self-pacing, individualized instruction on basic materials science. Results of this project indicate that systematically developed, self-paced instruction provides an effective means for orienting nontraditional college students and secondary students, especially minorities, to both engineering technology and basic materials science. In addition, students using such a system gain greater chances for mastering subject matter than with conventional modes of instruction.

Vision servo of industrial robot: A review

NASA Astrophysics Data System (ADS)

Zhang, Yujin

2018-04-01

Robot technology has been implemented to various areas of production and life. With the continuous development of robot applications, requirements of the robot are also getting higher and higher. In order to get better perception of the robots, vision sensors have been widely used in industrial robots. In this paper, application directions of industrial robots are reviewed. The development, classification and application of robot vision servo technology are discussed, and the development prospect of industrial robot vision servo technology is proposed.

Current and future possibilities of V2V and I2V technologies: an analysis directed toward Augmented Reality systems

NASA Astrophysics Data System (ADS)

Betancur, J. A.; Osorio-Gómez, Gilberto; Arnedo, Aida; Yarce Botero, Andrés.

2014-06-01

Nowadays, it is very important to explore the qualitative characteristics of autonomous mobility systems in automobiles, especially disruptive technology like Vehicle to Vehicle (V2V) and Infrastructure to Vehicle (I2V), in order to comprehend how the next generation of automobiles will be developed. In this sense, this research covers a general review about active safety in automobiles where V2V and I2V systems have been implemented; identifying the more realistic possibilities related to V2V and I2V technology and analyzing the current applications, some systems in development process and some future conceptual proposals. Mainly, it is notorious the potential development of mixing V2V and I2V systems pointing to increase the driver's attention; therefore, a configuration between these two technologies and some augmented reality system for automobiles (Head-Up Display and Head-Down Display) is proposed. There is a huge potential of implementation for this kind of configuration once the normative and the roadmap for its development can be widely established.

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders.

PubMed

Peek, Sebastiaan Theodorus Michaël; Wouters, Eveline J M; Luijkx, Katrien G; Vrijhoef, Hubertus J M

2016-05-03

There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults' needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale.

What it Takes to Successfully Implement Technology for Aging in Place: Focus Groups With Stakeholders

PubMed Central

Wouters, Eveline JM; Luijkx, Katrien G; Vrijhoef, Hubertus JM

2016-01-01

Background There is a growing interest in empowering older adults to age in place by deploying various types of technology (ie, eHealth, ambient assisted living technology, smart home technology, and gerontechnology). However, initiatives aimed at implementing these technologies are complicated by the fact that multiple stakeholder groups are involved. Goals and motives of stakeholders may not always be transparent or aligned, yet research on convergent and divergent positions of stakeholders is scarce. Objective To provide insight into the positions of stakeholder groups involved in the implementation of technology for aging in place by answering the following questions: What kind of technology do stakeholders see as relevant? What do stakeholders aim to achieve by implementing technology? What is needed to achieve successful implementations? Methods Mono-disciplinary focus groups were conducted with participants (n=29) representing five groups of stakeholders: older adults (6/29, 21%), care professionals (7/29, 24%), managers within home care or social work organizations (5/29, 17%), technology designers and suppliers (6/29, 21%), and policy makers (5/29, 17%). Transcripts were analyzed using thematic analysis. Results Stakeholders considered 26 different types of technologies to be relevant for enabling independent living. Only 6 out of 26 (23%) types of technology were mentioned by all stakeholder groups. Care professionals mentioned fewer different types of technology than other groups. All stakeholder groups felt that the implementation of technology for aging in place can be considered a success when (1) older adults’ needs and wishes are prioritized during development and deployment of the technology, (2) the technology is accepted by older adults, (3) the technology provides benefits to older adults, and (4) favorable prerequisites for the use of technology by older adults exist. While stakeholders seemed to have identical aims, several underlying differences emerged, for example, with regard to who should pay for the technology. Additionally, each stakeholder group mentioned specific steps that need to be taken to achieve successful implementation. Collectively, stakeholders felt that they need to take the leap (ie, change attitudes, change policies, and collaborate with other organizations); bridge the gap (ie, match technology with individuals and stimulate interdisciplinary education); facilitate technology for the masses (ie, work on products and research that support large-scale rollouts and train target groups on how to use technology); and take time to reflect (ie, evaluate use and outcomes). Conclusions Stakeholders largely agree on the direction in which they should be heading; however, they have different perspectives with regard to the technologies that can be employed and the work that is needed to implement them. Central to these issues seems to be the tailoring of technology or technologies to the specific needs of each community-dwelling older adult and the work that is needed by stakeholders to support this type of service delivery on a large scale. PMID:27143097

Development of a Convergent Spray Technologies(tm) Spray Process for a Solventless Sprayable Coating, MCC-1

NASA Technical Reports Server (NTRS)

Patel, Anil K.; Meeks, C.

1998-01-01

This paper discusses the application of Convergent Spray Technologies (TM) Spray Process to the development and successful implementation of Marshall Convergent Coating (MCC-1) as a primary Thermal Protection System (TPS) for the Space Shuttle Solid Rocket Boosters (SRBs). This paper discusses the environmental and process benefits of the MCC-1 technology, shows the systematic steps taken in developing the technology, including statistical sensitivity studies of about 35 variables. Based on the process and post-flight successes on the SRB, it will be seen that the technology is "field-proven". Application of this technology to other aerospace and commercial programs is summarized to illustrate the wide range of possibilities.

Moonlight project promotes energy-saving technology

NASA Astrophysics Data System (ADS)

Ishihara, A.

1986-01-01

In promoting energy saving, development of energy conservation technologies aimed at raising energy efficiency in the fields of energy conversion, its transportation, its storage, and its consumption is considered, along with enactment of legal actions urging rational use of energies and implementation of an enlightenment campaign for energy conservation to play a crucial role. Under the Moonlight Project, technical development is at present being centered around the following six pillars: (1) large scale energy saving technology; (2) pioneering and fundamental energy saving technology; (3) international cooperative research project; (4) research and survey of energy saving technology; (5) energy saving technology development by private industry; and (6) promotion of energy saving through standardization. Heat pumps, magnetohydrodynamic generators and fuel cells are discussed.

Market Assessment of Forward-Looking Turbulence Sensing Systems

NASA Technical Reports Server (NTRS)

Kauffmann, Paul; Sousa-Poza, Andres

2001-01-01

In recognition of the importance of turbulence mitigation as a tool to improve aviation safety, NASA's Aviation Safety Program developed a Turbulence Detection and Mitigation Sub-element. The objective of this effort is to develop highly reliable turbulence detection technologies for commercial transport aircraft to sense dangerous turbulence with sufficient time warning so that defensive measures can be implemented and prevent passenger and crew injuries. Current research involves three forward sensing products to improve the cockpit awareness of possible turbulence hazards. X-band radar enhancements will improve the capabilities of current weather radar to detect turbulence associated with convective activity. LIDAR (Light Detection and Ranging) is a laser-based technology that is capable of detecting turbulence in clear air. Finally, a possible Radar-LIDAR hybrid sensor is envisioned to detect the full range of convective and clear air turbulence. To support decisions relating to the development of these three forward-looking turbulence sensor technologies, the objective of this study was defined as examination of cost and implementation metrics. Tasks performed included the identification of cost factors and certification issues, the development and application of an implementation model, and the development of cost budget/targets for installing the turbulence sensor and associated software devices into the commercial transport fleet.

Technology for Independent Living: Sourcebook.

ERIC Educational Resources Information Center

Enders, Alexandra, Ed.

This sourcebook provides information for the practical implementation of independent living technology in the everyday rehabilitation process. "Information Services and Resources" lists databases, clearinghouses, networks, research and development programs, toll-free telephone numbers, consumer protection caveats, selected publications, and…

MDOT implementation plan for GPS technology in planning, design, and construction delivery

DOT National Transportation Integrated Search

2010-09-13

Global Positioning System (GPS) technology offers advantages to transportation agencies in the planning, design and construction stages of project delivery. This research study will develop a guide for Mississippi Department of Transportation (MDOT) ...

NASA Goddard Thermal Technology Overview 2018

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2018-01-01

This presentation summarizes the current plans and efforts at NASA/Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently submitted NASA budget will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of thermal control coatings, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

Two-Phase Flow Technology Developed and Demonstrated for the Vision for Exploration

NASA Technical Reports Server (NTRS)

Sankovic, John M.; McQuillen, John B.; Lekan, Jack F.

2005-01-01

NASA s vision for exploration will once again expand the bounds of human presence in the universe with planned missions to the Moon and Mars. To attain the numerous goals of this vision, NASA will need to develop technologies in several areas, including advanced power-generation and thermal-control systems for spacecraft and life support. The development of these systems will have to be demonstrated prior to implementation to ensure safe and reliable operation in reduced-gravity environments. The Two-Phase Flow Facility (T(PHI) FFy) Project will provide the path to these enabling technologies for critical multiphase fluid products. The safety and reliability of future systems will be enhanced by addressing focused microgravity fluid physics issues associated with flow boiling, condensation, phase separation, and system stability, all of which are essential to exploration technology. The project--a multiyear effort initiated in 2004--will include concept development, normal-gravity testing (laboratories), reduced gravity aircraft flight campaigns (NASA s KC-135 and C-9 aircraft), space-flight experimentation (International Space Station), and model development. This project will be implemented by a team from the NASA Glenn Research Center, QSS Group, Inc., ZIN Technologies, Inc., and the Extramural Strategic Research Team composed of experts from academia.

Transformational Technologies to Expedite Space Access and Development

NASA Astrophysics Data System (ADS)

Rather, John D. G.

2010-01-01

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. This paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.

The role of the Department of Defense in PACS and telemedicine research and development.

PubMed

Mogel, Greg T

2003-01-01

The United States Department of Defense (DOD) has played a leading role in the movement of digital imaging, picture archiving and communications systems, and more recently telemedicine with its associated technologies into the mainstream of healthcare. Beginning in the 1980s with domestic implementations, and followed in the 1990s by both small and large-scale military deployments, these technologies have been put into action with varying degrees of success. These efforts however, have always served as a guidepost for similar civilian efforts and the establishment of a marketplace for the technologies. This paper examines the history of the DOD's role in these areas, the projects and programs established, assessing their current state of development and identifying the future direction of the DOD's research and implementation efforts in telemedicine and advanced medical technologies. Copyright 2002 Published by Elsevier Science Ltd.

Design and Development of a Baseband Processor for the Advanced Communications Technology Satellite

NASA Technical Reports Server (NTRS)

Lee, Kerry D.

1996-01-01

This paper describes the implementation of the operational baseband processor (BBP) subsystem on board the NASA Advanced Communications Technology Satellite (ACTS). The BBP supports the network consisting of the NASA ground station (NGS) low burst rate (LBR) terminals, and the T1 very small aperture terminals (VSAT's), to provide flexible, demand assigned satellite switched (SS), baseband processed frequency division modulated (FDM)/time division multiple access (TDMA) operations. This paper presents an overview of the baseband processor and includes a description of the data flow, functional block diagrams, and a discussion of the implementation of BBP. A discussion of the supporting technologies for the BBP is presented. A brief summary of BBP-level performance testing is also presented. Finally, a discussion of the implications of current technology on the BBP design, if it were to be developed today, is presented.

Distributing responsibility in the debate on sustainable biofuels.

PubMed

Landeweerd, Laurens; Osseweijer, Patricia; Kinderlerer, Julian

2009-12-01

In the perception of technology innovation two world views compete for domination: technological and social determinism. Technological determinism holds that societal change is caused by technological developments, social determinism holds the opposite. Although both were quite central to discussion in the philosophy, history and sociology of technology in the 1970s and 1980s, neither is seen as mainstream now. They do still play an important role as background philosophies in societal debates and offer two very different perspectives on where the responsibilities for an ethically sound development of novel technologies lie. In this paper we will elaborate on these to two opposing views on technology development taking the recent debate on the implementation of biofuels as a case example.

Implementation and Testing of Low Cost Uav Platform for Orthophoto Imaging

NASA Astrophysics Data System (ADS)

Brucas, D.; Suziedelyte-Visockiene, J.; Ragauskas, U.; Berteska, E.; Rudinskas, D.

2013-08-01

Implementation of Unmanned Aerial Vehicles for civilian applications is rapidly increasing. Technologies which were expensive and available only for military use have recently spread on civilian market. There is a vast number of low cost open source components and systems for implementation on UAVs available. Using of low cost hobby and open source components ensures considerable decrease of UAV price, though in some cases compromising its reliability. In Space Science and Technology Institute (SSTI) in collaboration with Vilnius Gediminas Technical University (VGTU) researches have been performed in field of constructing and implementation of small UAVs composed of low cost open source components (and own developments). Most obvious and simple implementation of such UAVs - orthophoto imaging with data download and processing after the flight. The construction, implementation of UAVs, flight experience, data processing and data implementation will be further covered in the paper and presentation.

The NASA technology push towards future space mission systems

NASA Technical Reports Server (NTRS)

Sadin, Stanley R.; Povinelli, Frederick P.; Rosen, Robert

1988-01-01

As a result of the new Space Policy, the NASA technology program has been called upon to a provide a solid base of national capabilities and talent to serve NASA's civil space program, commercial, and other space sector interests. This paper describes the new technology program structure and its characteristics, traces its origin and evolution, and projects the likely near- and far-term strategic steps. It addresses the alternative 'push-pull' approaches to technology development, the readiness levels to which the technology needs to be developed for effective technology transfer, and the focused technology programs currently being implemented to satisfy the needs of future space systems.

Advanced Technologies for Space Life Science Payloads on the International Space Station

NASA Technical Reports Server (NTRS)

Hines, John W.; Connolly, John P. (Technical Monitor)

1997-01-01

SENSORS 2000! (S2K!) is a specialized, high-performance work group organized to provide advanced engineering and technology support for NASA's Life Sciences spaceflight and ground-based research and development programs. In support of these objectives, S2K! manages NASA's Advanced Technology Development Program for Biosensor and Biotelemetry Systems (ATD-B), with particular emphasis on technologies suitable for Gravitational Biology, Human Health and Performance, and Information Technology and Systems Management. A concurrent objective is to apply and transition ATD-B developed technologies to external, non-NASA humanitarian (medical, clinical, surgical, and emergency) situations and to stimulate partnering and leveraging with other government agencies, academia, and the commercial/industrial sectors. A phased long-term program has been implemented to support science disciplines and programs requiring specific biosensor (i.e., biopotential, biophysical, biochemical, and biological) measurements from humans, animals (mainly primates and rodents), and cells under controlled laboratory and simulated microgravity situations. In addition to the technology programs described above, NASA's Life and Microgravity Sciences and Applications Office has initiated a Technology Infusion process to identify and coordinate the utilization and integration of advanced technologies into its International Space Station Facilities. This project has recently identified a series of technologies, tasks, and products which, if implemented, would significantly increase the science return, decrease costs, and provide improved technological capability. This presentation will review the programs described above and discuss opportunities for collaboration, leveraging, and partnering with NASA.

Labview Based ECG Patient Monitoring System for Cardiovascular Patient Using SMTP Technology.

PubMed

Singh, Om Prakash; Mekonnen, Dawit; Malarvili, M B

2015-01-01

This paper leads to developing a Labview based ECG patient monitoring system for cardiovascular patient using Simple Mail Transfer Protocol technology. The designed device has been divided into three parts. First part is ECG amplifier circuit, built using instrumentation amplifier (AD620) followed by signal conditioning circuit with the operation amplifier (lm741). Secondly, the DAQ card is used to convert the analog signal into digital form for the further process. Furthermore, the data has been processed in Labview where the digital filter techniques have been implemented to remove the noise from the acquired signal. After processing, the algorithm was developed to calculate the heart rate and to analyze the arrhythmia condition. Finally, SMTP technology has been added in our work to make device more communicative and much more cost-effective solution in telemedicine technology which has been key-problem to realize the telediagnosis and monitoring of ECG signals. The technology also can be easily implemented over already existing Internet.

Labview Based ECG Patient Monitoring System for Cardiovascular Patient Using SMTP Technology

PubMed Central

Singh, Om Prakash; Mekonnen, Dawit; Malarvili, M. B.

2015-01-01

This paper leads to developing a Labview based ECG patient monitoring system for cardiovascular patient using Simple Mail Transfer Protocol technology. The designed device has been divided into three parts. First part is ECG amplifier circuit, built using instrumentation amplifier (AD620) followed by signal conditioning circuit with the operation amplifier (lm741). Secondly, the DAQ card is used to convert the analog signal into digital form for the further process. Furthermore, the data has been processed in Labview where the digital filter techniques have been implemented to remove the noise from the acquired signal. After processing, the algorithm was developed to calculate the heart rate and to analyze the arrhythmia condition. Finally, SMTP technology has been added in our work to make device more communicative and much more cost-effective solution in telemedicine technology which has been key-problem to realize the telediagnosis and monitoring of ECG signals. The technology also can be easily implemented over already existing Internet. PMID:27006940

Home Quick – Occupational Therapy Home Visits Using mHealth, to Facilitate Discharge from Acute Admission Back to the Community

PubMed Central

NIX, JACQUELINE; COMANS, TRACY

2017-01-01

This article reports upon an initiative to improve the timeliness of occupational therapy home visits for discharge planning by implementing technology solutions while maintaining patient safety. A community hospital in Queensland, Australia, hosted a process evaluation that examined which aspects of home visiting could be replaced or augmented by alternative technologies. Strategies were trialled, implemented and assessed using the number of home visits completed and the time from referral to completion as outcomes. A technology-enhanced solution called “Home Quick” was developed using technology to facilitate pre-discharge home visits. The implementation of Home Quick resulted in an increase in the number of home visits conducted prior to discharge (50% increase from 145 to 223) and significantly increased the number of patients seen earlier following referral (X2=69.3; p<0.001). The substitution of direct home visits with technology-enabled remote visits is suitable for a variety of home visiting scenarios traditionally performed by occupational therapists. PMID:28814994

Using Multimedia Technology to Teach Modern Greek Language Online in China: Development, Implementation, and Evaluation

ERIC Educational Resources Information Center

Huang, Xiaoyin; Dedegikas, Costa; Walls, Jan

2011-01-01

This article reviews the process of design, development, and implementation of the Modern Greek online courses (Chinese version) in Hellenic Studies at Simon Fraser University (SFU), in collaboration with Chinese university partners. The purpose of this study is (a) to explore the effectiveness of the course design, and (b) to reveal the…

Design, Development and Implementation of a Technology Enhanced Hybrid Course on Molecular Symmetry: Students' Outcomes and Attitudes

ERIC Educational Resources Information Center

Antonoglou, L. D.; Charistos, N. D.; Sigalas, M. P.

2011-01-01

A hybrid course of Molecular Symmetry and Group Theory which combines traditional face-to-face instruction with an online web enhanced learning environment within a Course Management System was designed, developed, and implemented with a purpose to establish an active and student-centred educational setting. Multi-representational educational…

Open Technology Approaches to Geospatial Interface Design

NASA Astrophysics Data System (ADS)

Crevensten, B.; Simmons, D.; Alaska Satellite Facility

2011-12-01

What problems do you not want your software developers to be solving? Choosing open technologies across the entire stack of software development-from low-level shared libraries to high-level user interaction implementations-is a way to help ensure that customized software yields innovative and valuable tools for Earth Scientists. This demonstration will review developments in web application technologies and the recurring patterns of interaction design regarding exploration and discovery of geospatial data through the Vertex: ASF's Dataportal interface, a project utilizing current open web application standards and technologies including HTML5, jQueryUI, Backbone.js and the Jasmine unit testing framework.

The ARC organizational and community intervention strategy for implementing evidence-based children's mental health treatments.

PubMed

Glisson, Charles; Schoenwald, Sonja K

2005-12-01

This paper reviews the implications of organizational and community intervention research for the implementation of effective mental health treatments in usual community practice settings. The paper describes an organizational and community intervention model named ARC for Availability, Responsiveness and Continuity, that was designed to support the improvement of social and mental health services for children. The ARC model incorporates intervention components from organizational development, interorganizational domain development, the diffusion of innovation, and technology transfer that target social, strategic, and technological factors in effective children's services. This paper also describes a current NIMH-funded study that is using the ARC intervention model to support the implementation of an evidence-based treatment, Multisystemic Therapy (MST), for delinquent youth in extremely rural, impoverished communities in the Appalachian Mountains of East Tennessee.

Analysis of the development of missile-borne IR imaging detecting technologies

NASA Astrophysics Data System (ADS)

Fan, Jinxiang; Wang, Feng

2017-10-01

Today's infrared imaging guiding missiles are facing many challenges. With the development of targets' stealth, new-style IR countermeasures and penetrating technologies as well as the complexity of the operational environments, infrared imaging guiding missiles must meet the higher requirements of efficient target detection, capability of anti-interference and anti-jamming and the operational adaptability in complex, dynamic operating environments. Missileborne infrared imaging detecting systems are constrained by practical considerations like cost, size, weight and power (SWaP), and lifecycle requirements. Future-generation infrared imaging guiding missiles need to be resilient to changing operating environments and capable of doing more with fewer resources. Advanced IR imaging detecting and information exploring technologies are the key technologies that affect the future direction of IR imaging guidance missiles. Infrared imaging detecting and information exploring technologies research will support the development of more robust and efficient missile-borne infrared imaging detecting systems. Novelty IR imaging technologies, such as Infrared adaptive spectral imaging, are the key to effectively detect, recognize and track target under the complicated operating and countermeasures environments. Innovative information exploring techniques for the information of target, background and countermeasures provided by the detection system is the base for missile to recognize target and counter interference, jamming and countermeasure. Modular hardware and software development is the enabler for implementing multi-purpose, multi-function solutions. Uncooled IRFPA detectors and High-operating temperature IRFPA detectors as well as commercial-off-the-shelf (COTS) technology will support the implementing of low-cost infrared imaging guiding missiles. In this paper, the current status and features of missile-borne IR imaging detecting technologies are summarized. The key technologies and its development trends of missiles' IR imaging detecting technologies are analyzed.

Information technology Governance standards on mobile applications for fishing zone based onCobIT 5 Framework in Majene

NASA Astrophysics Data System (ADS)

Palalloi, Irfan Andi; Anwar, Azwar; Syarifuddin

2018-05-01

Most of the activities of Majene regency society dominant as a fisherman, by and large, they work based on the hereditary experiences of their ancestors. This is proven by fishery industry statistic that highest from other industry with 18,30 % in the distribution of the gross regional domestic product. In each specific case, utilization of technology becomes a necessity that plays a key role. Adoption of technology for fishermen groups in use of GPSequipment has frequently committed by the government also non-profit organization go through training and mentoring. Nowadays there are some modern mobile applications has been developed by government agency assist the group of fishermen handy on managing their fishing activity. Such us ZPPI data row from Lapan Satelite, nelpinwas also known as smart fisheries, infrastructure development for space oceanography (indeso). However, all of them carry out of the risk and problems on the user side. One of them related toaccuracy and reliability. In this research, we elaborate technical factor, governance, through Cobit framework and analyze the best practice standardfor implementing the technology. All in all, the result presented of the governance standard on control and implementing technology under customer dimension in information technology governance on the standard process to ensure benefit delivery for implementing mobile application fishery in DKP Majene regency.

INL Control System Situational Awareness Technology Annual Report 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Rueff; Bryce Wheeler; Todd Vollmer

The overall goal of this project is to develop an interoperable set of tools to provide a comprehensive, consistent implementation of cyber security and overall situational awareness of control and sensor network implementations. The operation and interoperability of these tools will fill voids in current technological offerings and address issues that remain an impediment to the security of control systems. This report provides an FY 2012 update on the Sophia, Mesh Mapper, Intelligent Cyber Sensor, and Data Fusion projects with respect to the year-two tasks and annual reporting requirements of the INL Control System Situational Awareness Technology report (July 2010).

Research on the Development of Middle School Mathematics Pre-Service Teachers' Perceptions Regarding the Use of Technology in Teaching Mathematics

ERIC Educational Resources Information Center

Akkaya, Recai

2016-01-01

This study aimed to investigate the changes in teacher perceptions regarding the use of technology subsequent to the training about technology integration in mathematics teaching. A training program that included combined technology, pedagogy and content knowledge was prepared and implemented on pre-service teachers with this aim. Exploratory…

Exploring the Effect of Climate Perturbations on Water Availability for Renewable Energy Development in the Indian Wells Valley, California

NASA Astrophysics Data System (ADS)

Rey, David M.

Energy and water are connected through the water-use cycle (e.g. obtaining, transporting, and treating water) and thermoelectric energy generation, which converts heat to electricity via steam-driven turbines. As the United States implements more renewable energy technologies, quantifying the relationships between energy, water, and land-surface impacts of these implementations will provide policy makers the strengths and weaknesses of different renewable energy options. In this study, a MODFLOW model of the Indian Wells Valley (IWV), in California, was developed to capture the water, energy, and land-surface impacts of potential proposed 1) solar, 2) wind, and 3) biofuel implementations. The model was calibrated to pre-existing groundwater head data from 1985 to present to develop a baseline model before running two-year predictive scenarios for photovoltaic (PV), concentrating solar power (CSP), wind, and biofuel implementations. Additionally, the baseline model was perturbed by decreasing mountain front recharge values by 5%, 10%, and 15%, simulating potential future system perturbations under a changing climate. These potential future conditions were used to re-run each implementation scenario. Implementation scenarios were developed based on population, typical energy use per person, existing land-use and land-cover type within the IWV, and previously published values for water use, surface-area use, and energy-generation potential for each renewable fuel type. The results indicate that the quantity of water needed, localized drawdown from pumping water to meet implementation demands, and generation efficiency are strongly controlled by the fuel type, as well as the energy generating technology and thermoelectric technologies implemented. Specifically, PV and wind-turbine (WT) implementations required less than 1% of the estimated annual aquifer recharge, while technologies such as biofuels and CSP, which rely on thermoelectric generation, ranged from 3% to 20%. As modeled groundwater elevations declined in the IWV, the net generation (i.e. energy produced - energy used) of each renewable energy implementation decreased due a higher energy cost for pumping groundwater. The loss in efficiency was minimal for PV and wind solutions, with maximum changes in the drawdown being less than 10 m; however, for CSP and biofuel implementations drawdowns over 50 m were observed at the pumping well, resulting in electrical generation efficiency losses between 4% and 50% over a two-year period. It was concluded that PV would be the best balance between water and land-use for the IWV, or other groundwater dependent Basin and Range settings. In areas with limited water resources but abundant available land for implementation, WT solutions would have the smallest hydrologic impact. The impact of renewable scenarios was highly variable across and within differing fuel types, with the potential for larger negative impacts under a changing climate in areas with no perennial surface water.

Organizational issues in the implementation and adoption of health information technology innovations: an interpretative review.

PubMed

Cresswell, Kathrin; Sheikh, Aziz

2013-05-01

Implementations of health information technologies are notoriously difficult, which is due to a range of inter-related technical, social and organizational factors that need to be considered. In the light of an apparent lack of empirically based integrated accounts surrounding these issues, this interpretative review aims to provide an overview and extract potentially generalizable findings across settings. We conducted a systematic search and critique of the empirical literature published between 1997 and 2010. In doing so, we searched a range of medical databases to identify review papers that related to the implementation and adoption of eHealth applications in organizational settings. We qualitatively synthesized this literature extracting data relating to technologies, contexts, stakeholders, and their inter-relationships. From a total body of 121 systematic reviews, we identified 13 systematic reviews encompassing organizational issues surrounding health information technology implementations. By and large, the evidence indicates that there are a range of technical, social and organizational considerations that need to be deliberated when attempting to ensure that technological innovations are useful for both individuals and organizational processes. However, these dimensions are inter-related, requiring a careful balancing act of strategic implementation decisions in order to ensure that unintended consequences resulting from technology introduction do not pose a threat to patients. Organizational issues surrounding technology implementations in healthcare settings are crucially important, but have as yet not received adequate research attention. This may in part be due to the subjective nature of factors, but also due to a lack of coordinated efforts toward more theoretically-informed work. Our findings may be used as the basis for the development of best practice guidelines in this area. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Technology platforms: opportunities and development perspectives

NASA Astrophysics Data System (ADS)

Belyakov, G. P.; Avramchikova, N. T.; Belyakova, G. Y.; Chuvashova, M. N.

2016-11-01

The term “technology platform” is used to define thematic scopes in terms of which technological priorities are formed concerning state, business, science and education cooperation that are aimed to solve the problem of state technological independence. The authors have examined the implementation of this tool so that to concentrate essential resources in priority-driven vectors of science and technological advancement of a guiding cluster of innovative technologies in the field of space applications.

Point-of-care diagnostics: extending the laboratory network to reach the last mile.

PubMed

Drain, Paul K; Rousseau, Christine

2017-03-01

More point-of-care (POC) diagnostic tests are becoming available for HIV diagnosis and treatment in resource-limited settings. These novel technologies have the potential to foster decentralized HIV care and treatment for the benefit of clinical laboratories, HIV clinics, and HIV-infected patients. There continue to be many business, technological, and operational challenges that limit product development and regulatory approval, which limits products available for the required operational and cost-effectiveness studies and delays policy adoption and implementation. Although the rapid HIV diagnostic test has been widely successful, the pathways for POC CD4 cell count and HIV viral load assay analyzers have been more challenging. We describe significant hurdles for product development, approval, and implementation, which include the business case, technical development, clinical impact, and integrating laboratory and clinical networks. The objective of this review is to highlight the obstacles for developing and implementing appropriate strategies for POC HIV testing assays to improve the clinical services for HIV-infected patients in resource-limited settings.

Computer-Based Resource Accounting Model for Automobile Technology Impact Assessment

DOT National Transportation Integrated Search

1976-10-01

A computer-implemented resource accounting model has been developed for assessing resource impacts of future automobile technology options. The resources tracked are materials, energy, capital, and labor. The model has been used in support of the Int...

Beyond the Baseline: Proceedings of the Space Station Evolution Symposium. Volume 2, Part 2; Space Station Freedom Advanced Development Program

NASA Technical Reports Server (NTRS)

1990-01-01

This report contains the individual presentations delivered at the Space Station Evolution Symposium in League City, Texas on February 6, 7, 8, 1990. Personnel responsible for Advanced Systems Studies and Advanced Development within the Space Station Freedom program reported on the results of their work to date. Systems Studies presentations focused on identifying the baseline design provisions (hooks and scars) necessary to enable evolution of the facility to support changing space policy and anticipated user needs. Also emphasized were evolution configuration and operations concepts including on-orbit processing of space transfer vehicles. Advanced Development task managers discussed transitioning advanced technologies to the baseline program, including those near-term technologies which will enhance the safety and productivity of the crew and the reliability of station systems. Special emphasis was placed on applying advanced automation technology to ground and flight systems. This publication consists of two volumes. Volume 1 contains the results of the advanced system studies with the emphasis on reference evolution configurations, system design requirements and accommodations, and long-range technology projections. Volume 2 reports on advanced development tasks within the Transition Definition Program. Products of these tasks include: engineering fidelity demonstrations and evaluations on Station development testbeds and Shuttle-based flight experiments; detailed requirements and performance specifications which address advanced technology implementation issues; and mature applications and the tools required for the development, implementation, and support of advanced technology within the Space Station Freedom Program.

Research on Network Defense Strategy Based on Honey Pot Technology

NASA Astrophysics Data System (ADS)

Hong, Jianchao; Hua, Ying

2018-03-01

As a new network security technology of active defense, The honeypot technology has become a very effective and practical method of decoy attackers. The thesis discusses the theory, structure, characteristic, design and implementation of Honeypot in detail. Aiming at the development of means of attack, put forward a kind of network defense technology based on honeypot technology, constructing a virtual Honeypot demonstrate the honeypot’s functions.

Evaluating the Implementation Fidelity of Technology Immersion and Its Relationship with Student Achievement

ERIC Educational Resources Information Center

Shapley, Kelly S.; Sheehan, Daniel; Maloney, Catherine; Caranikas-Walker, Fanny

2010-01-01

In a pilot study of the Technology Immersion model, high-need middle schools were "immersed" in technology by providing a laptop for each student and teacher, wireless Internet access, curricular and assessment resources, professional development, and technical and pedagogical support. This article examines the fidelity of model…

Digital Technologies: From Vision to Action

ERIC Educational Resources Information Center

Armistead, Stuart

2016-01-01

The interest and uptake in utilising digital technologies in education appears to be exponential. With the rollout of ultrafast broadband and the development of the Network for Learning in New Zealand, school leaders face the challenges and opportunity of deciding when, what and how they go about implementing digital technologies in their schools.…

Preliminary Recommendations Regarding Preparation of Teachers and School Leaders to Use Learning Technologies

ERIC Educational Resources Information Center

Bull, Glen; Spector, J. Michael; Persichitte, Kay; Meier, Ellen

2017-01-01

This article describes preliminary work for the "Educational Technology Efficacy Research" symposium taking place in 2017. The symposium will present the role of efficacy research in the development, adoption, and implementation of educational technology. In preparation for this symposium, ten working groups are investigating the role of…

Teaching with Technology in Higher Education: Understanding Conceptual Change and Development in Practice

ERIC Educational Resources Information Center

Englund, Claire; Olofsson, Anders D.; Price, Linda

2017-01-01

Research indicates that teachers' conceptions of and approaches to teaching with technology are central for the successful imple-mentation of educational technologies in higher education. This study advances this premise. We present a 10-year longitudinal study examining teachers' conceptions of and approaches to teaching and learning with…

The Teacher as Re-Designer of Technology Integrated Activities for an Early Literacy Curriculum

ERIC Educational Resources Information Center

Cviko, Amina; McKenney, Susan; Voogt, Joke

2013-01-01

Though popular among children outside of school, Dutch teachers often struggle to offer technology integrated activities in the kindergarten classroom. Because involving teachers in development of technology integrated activities can support their implementation, this study examines teachers in the role of re-designing such activities. Two case…

Application of Semantic Approaches and Interactive Virtual Technology to Improve Teaching Effectiveness

ERIC Educational Resources Information Center

Jou, Min; Liu, Chi-Chia

2012-01-01

This article describes an implementation of interactive virtual environments that have been designed for supporting the education of technical skills in material processing technology. The developed web-based systems provide the capability to train students in the technical skills of material processing technology without the need to work on…

Music Teacher Perceptions of a Model of Technology Training and Support in Virginia

ERIC Educational Resources Information Center

Welch, Lee Arthur

2013-01-01

A plethora of technology resources currently exists for the music classroom of the twenty-first century, including digital audio and video, music software, electronic instruments, Web 2.0 tools and more. Research shows a strong need for professional development for teachers to properly implement and integrate instructional technology resources…

Promoting Active Learning in Technology-Infused TILE Classrooms at the University of Iowa

ERIC Educational Resources Information Center

Van Horne, Sam; Murniati, Cecilia; Gaffney, Jon D. H.; Jesse, Maggie

2012-01-01

In this case study, the authors describe the successful implementation of technology-infused TILE classrooms at the University of Iowa. A successful collaboration among campus units devoted to instructional technologies and teacher development, the TILE Initiative has provided instructors with a new set of tools to support active learning. The…

High-Power Solar Electric Propulsion for Future NASA Missions

NASA Technical Reports Server (NTRS)

Manzella, David; Hack, Kurt

2014-01-01

NASA has sought to utilize high-power solar electric propulsion as means of improving the affordability of in-space transportation for almost 50 years. Early efforts focused on 25 to 50 kilowatt systems that could be used with the Space Shuttle, while later efforts focused on systems nearly an order of magnitude higher power that could be used with heavy lift launch vehicles. These efforts never left the concept development phase in part because the technology required was not sufficiently mature. Since 2012 the NASA Space Technology Mission Directorate has had a coordinated plan to mature the requisite solar array and electric propulsion technology needed to implement a 30 to 50 kilowatt solar electric propulsion technology demonstration mission. Multiple solar electric propulsion technology demonstration mission concepts have been developed based on these maturing technologies with recent efforts focusing on an Asteroid Redirect Robotic Mission. If implemented, the Asteroid Redirect Vehicle will form the basis for a capability that can be cost-effectively evolved over time to provide solar electric propulsion transportation for a range of follow-on mission applications at power levels in excess of 100 kilowatts.

[Advanced Composites Technology Initiatives

NASA Technical Reports Server (NTRS)

Julian, Mark R.

2002-01-01

This final report closes out the W02 NASA Grant #NCC5-646. The FY02 grant for advanced technology initiatives through the Advanced Composites Technology Institute in Bridgeport, WV, at the Robert C. Byrd Institute (RCBI) Bridgeport Manufacturing Technology Center, is complete; all funding has been expended. RCBI continued to expand access to technology; develop and implement a workforce-training curriculum; improve material development; and provide prototyping and demonstrations of new and advanced composites technologies for West Virginia composites firms. The FY 02 efforts supported workforce development, technical training and the HST development effort of a super-lightweight composite carrier prototype and expanded the existing technical capabilities of the growing aerospace industry across West Virginia to provide additional support for NASA missions. Additionally, the Composites Technology and Training Center was awarded IS0 9001 - 2000 certification and Cleanroom Class 1000 certification during this report period.

Two-Stage Hands-On Technology Activity to Develop Preservice Teachers' Competency in Applying Science and Mathematics Concepts

ERIC Educational Resources Information Center

Lin, Kuen-Yi; Williams, P. John

2017-01-01

This paper discusses the implementation of a two-stage hands-on technology learning activity, based on Dewey's learning experience theory that is designed to enhance preservice teachers' primary and secondary experiences in developing their competency to solve hands-on problems that apply science and mathematics concepts. The major conclusions…

Excellence in Elementary School Science (EESS): Teachers' Perceptions & Technology Integration from a Professional Development

ERIC Educational Resources Information Center

Hu, Helen; Garimella, Uma

2017-01-01

This proceeding paper will report about a study that investigated how a group of elementary school teachers responded to a professional development training on Science and Technology as demonstrated in their perceived preparedness and comfort with teaching science, and their subsequent implementation with K-4 students. The results from the study…

Organizational Learning as an Organization Development Intervention in Six High-Technology Firms in Taiwan: An Exploratory Case Study

ERIC Educational Resources Information Center

Lien, Bella Ya-Hui; Hung, Richard Y.; McLean, Gary N.

2007-01-01

Organizational learning (OL) is about how individuals collect, absorb, and transform information into organizational memory and knowledge. This case study explored how six high-technology firms in Taiwan chose OL as an organization development intervention strategy. Issues included how best to implement OL; how individuals, teams, and…

Beauty and Precision: Weaving Complex Educational Technology Projects with Visual Instructional Design Languages

ERIC Educational Resources Information Center

Derntl, Michael; Parrish, Patrick; Botturi, Luca

2010-01-01

Instructional design and technology products result from many options and constraints. On the one hand, solutions should be creative, effective and flexible; on the other hand, developers and instructors need precise guidance and details on what to do during development and implementation. Communication of and about designs is supported by design…

Towards a TPACK-Fostering ICT Instructional Process for Teachers: Lessons from the Implementation of Interactive Whiteboard Instruction

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Divaharan, Shanti

2013-01-01

This paper describes an on-going design-based research project that aims to develop an instructional process to facilitate pre-service teachers' technological pedagogical content knowledge (TPACK) development as they learn to integrate information and communication technology (ICT) in their teaching content subjects. In conjunction with an…

Longitudinal Effects of Technology Integration and Teacher Professional Development on Students' Mathematics Achievement

ERIC Educational Resources Information Center

Bicer, Ali; Capraro, Robert M.

2017-01-01

MathForward is a program that provides teacher professional development and integrates the use of technology as a tool in the classroom. The present study examined students' mathematics growth from 2012 to 2013 and observed how students' mathematics scores changed after their school implemented the MathForward program. The sample consisted of two…

Examining the Gaps between Teaching and Learning in the Technology Curriculum within Taiwan's 9-Year Articulated Curriculum Reform from the Perspective of Curriculum Implementation

ERIC Educational Resources Information Center

Lin, Kuen-Yi; Chang, Liang-Te; Tsai, Fu-Hsing; Kao, Chia-Pin

2015-01-01

Curriculum reform has frequently focused on the curriculum-development stage, overlooking considerations regarding curriculum implementation, which has led to reform failure. In this study, consideration was placed primarily on the curriculum implementation stage. The gaps between teachers' and students' perceptions of content, learning…

A Case Study: Implementing an Interactive Video Instruction System in Teaching Electronics and Industrial Maintenance.

ERIC Educational Resources Information Center

Shipe, Ron; And Others

A study examined the development and implementation of an interactive video instruction system for teaching electronics and industrial maintenance at the University of Tennessee. The specific purposes of the study were to document unusual problems that may be encountered when this new technology is implemented, suggest corrective actions, and…

Project IMPACT Pilot Report: Feasibility of Implementing a Hospital-to-Home Transition Bundle.

PubMed

Mallory, Leah A; Osorio, Snezana Nena; Prato, B Stephen; DiPace, Jennifer; Schmutter, Lisa; Soung, Paula; Rogers, Amanda; Woodall, William J; Burley, Kayla; Gage, Sandra; Cooperberg, David

2017-03-01

To improve hospital to home transitions, a 4-element pediatric patient-centered transition bundle was developed, including: a transition readiness checklist; predischarge teach-back education; timely and complete written handoff to the primary care provider; and a postdischarge phone call. The objective of this study was to demonstrate the feasibility of bundle implementation and report initial outcomes at 4 pilot sites. Outcome measures included postdischarge caregiver ability to teach-back key home management information and 30-day reuse rates. A multisite, observational time series using multiple planned sequential interventions to implement bundle components with non-technology-supported and technology-supported patients. Data were collected via electronic health record reviews and during postdischarge phone calls. Statistical process control charts were used to assess outcomes. Four pilot sites implemented the bundle between January 2014 and May 2015 for 2601 patients, of whom 1394 had postdischarge telephone encounters. Improvement was noted in the implementation of all bundle elements with the transitions readiness checklist posing the greatest feasibility challenge. Phone contact connection rates were 69%. Caregiver ability to teach-back essential home management information postdischarge improved from 18% to 82%. No improvement was noted in reuse rates, which differed dramatically between technology-supported and non-technology-supported patients. A pediatric care transition bundle was successfully tested and implemented, as demonstrated by improvement in all process measures, as well as caregiver home management skills. Important considerations for successful implementation and evaluation of the discharge bundle include the role of local context, electronic health record integration, and subgroup analysis for technology-supported patients. Copyright © 2017 by the American Academy of Pediatrics.

The Implementation of Advanced Solar Array Technology in Future NASA Missions

NASA Technical Reports Server (NTRS)

Piszczor, Michael F.; Kerslake, Thomas W.; Hoffman, David J.; White, Steve; Douglas, Mark; Spence, Brian; Jones, P. Alan

2003-01-01

Advanced solar array technology is expected to be critical in achieving the mission goals on many future NASA space flight programs. Current PV cell development programs offer significant potential and performance improvements. However, in order to achieve the performance improvements promised by these devices, new solar array structures must be designed and developed to accommodate these new PV cell technologies. This paper will address the use of advanced solar array technology in future NASA space missions and specifically look at how newer solar cell technologies impact solar array designs and overall power system performance.

Physics Education: A Significant Backbone of Sustainable Development in Developing Countries

NASA Astrophysics Data System (ADS)

Akintola, R. A.

2006-08-01

In the quest for technological self-reliance, many policies, programs and projects have been proposed and implemented in order to procure solutions to the problems of technological inadequacies of developing countries. It has been observed that all these failed. This research identifies the problems and proposes lasting solutions to emancipate physics education in developing nations and highlight possible future gains. The statistical analysis employed was based on questionnaires, interviews and data analysis.

Using failure mode and effects analysis to plan implementation of smart i.v. pump technology.

PubMed

Wetterneck, Tosha B; Skibinski, Kathleen A; Roberts, Tanita L; Kleppin, Susan M; Schroeder, Mark E; Enloe, Myra; Rough, Steven S; Hundt, Ann Schoofs; Carayon, Pascale

2006-08-15

Failure mode and effects analysis (FMEA) was used to evaluate a smart i.v. pump as it was implemented into a redesigned medication-use process. A multidisciplinary team conducted a FMEA to guide the implementation of a smart i.v. pump that was designed to prevent pump programming errors. The smart i.v. pump was equipped with a dose-error reduction system that included a pre-defined drug library in which dosage limits were set for each medication. Monitoring for potential failures and errors occurred for three months postimplementation of FMEA. Specific measures were used to determine the success of the actions that were implemented as a result of the FMEA. The FMEA process at the hospital identified key failure modes in the medication process with the use of the old and new pumps, and actions were taken to avoid errors and adverse events. I.V. pump software and hardware design changes were also recommended. Thirteen of the 18 failure modes reported in practice after pump implementation had been identified by the team. A beneficial outcome of FMEA was the development of a multidisciplinary team that provided the infrastructure for safe technology implementation and effective event investigation after implementation. With the continual updating of i.v. pump software and hardware after implementation, FMEA can be an important starting place for safe technology choice and implementation and can produce site experts to follow technology and process changes over time. FMEA was useful in identifying potential problems in the medication-use process with the implementation of new smart i.v. pumps. Monitoring for system failures and errors after implementation remains necessary.

Terrestrial applications from space technology

NASA Technical Reports Server (NTRS)

Clarks, H.

1985-01-01

NASA's Technology Utilization Program, which is concerned with transferring aerospace technologies to the public and private sectors, is described. The strategy for transferring the NASA technologies to engineering projects includes: (1) identification of the problem, (2) selection of an appropriate aerospace technology, (3) development of a partnership with the company, (4) implementation of the project, and (5) commercialization of the product. Three examples revealing the application of aerospace technologies to projects in biomedical engineering, materials, and automation and robotics are presented; the development of a programmable, implantable medication system and a programmable, mask-based optical correlator, and the improvement of heat and erosion resistance in continuous casting are examined.

Dissemination of Technology to Evaluate Healthy Food Incentive Programs.

PubMed

Freedman, Darcy A; Hunt, Alan R; Merritt, Katie; Shon, En-Jung; Pike, Stephanie N

2017-03-01

Federal policy supports increased implementation of monetary incentive interventions for chronic disease prevention among low-income populations. This study describes how a Prevention Research Center, working with a dissemination partner, developed and distributed technology to support nationwide implementation and evaluation of healthy food incentive programming focused on Supplemental Nutrition Assistance Program recipients. FM Tracks, an iOS-based application and website, was developed to standardize evaluation methods for healthy food incentive program implementation at direct-to-consumer markets. This evaluation examined diffusion and adoption of the technology over 9 months (July 2015-March 2016). Data were analyzed in 2016. FM Tracks was disseminated to 273 markets affiliated with 37 regional networks in 18 states and Washington, DC. All markets adopted the sales transaction data collection feature, with nearly all recording at least one Supplemental Nutrition Assistance Program (99.3%) and healthy food incentive (97.1%) transaction. A total of 43,493 sales transactions were recorded. By the ninth month of technology dissemination, markets were entering individual sales transactions using the application (34.5%) and website (29.9%) and aggregated transactions via website (35.6%) at similar rates. Use of optional evaluation features like recording a customer ID with individual transactions increased successively with a low of 22.2% during the first month to a high of 69.2% in the ninth month. Systematic and widely used evaluation technology creates possibilities for pragmatic research embedded within ongoing, real-world implementation of food access interventions. Technology dissemination requires supportive technical assistance and continuous refinement that can be advanced through academic-practitioner partnerships. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

PV history: Lessons for the future

NASA Technical Reports Server (NTRS)

Ralph, E. L.

1982-01-01

A history of terrestrial photovoltaics is presented indicating that the photovoltaic potential was well perceived and a good technology developent plan was formulated and implemented. Major accomplishments of the technology plan are highlighted. Research objectives and research needs for the future are outlined.

MDOT implementation plan for global positioning systems (GPS) technology in planning, design, and construction delivery.

DOT National Transportation Integrated Search

2010-09-13

Global Positioning System (GPS) technology offers advantages to transportation agencies in the planning, design and construction stages of project delivery. This research study will develop a guide for Mississippi Department of Transportation (MDOT) ...

High responsivity CMOS imager pixel implemented in SOI technology

NASA Technical Reports Server (NTRS)

Zheng, X.; Wrigley, C.; Yang, G.; Pain, B.

2000-01-01

Availability of mature sub-micron CMOS technology and the advent of the new low noise active pixel sensor (APS) concept have enabled the development of low power, miniature, single-chip, CMOS digital imagers in the decade of the 1990's.

Ready, Set, Integrate!

ERIC Educational Resources Information Center

McCombs, John

2003-01-01

Describes how the American Embassy School (AES) in New Delhi, India achieved school-wide technology integration. Discusses development of a new network; beginning to mentor; organizing the Technology Integration Plan (TIP) by software application; implementing the plan; assessing progress; and results, which overall, were positive. (AEF)

Advancing Technological Education: Keeping America Competitive

ERIC Educational Resources Information Center

Patton, Madeline

2005-01-01

This publication profiles the strategies and best practices of Advanced Technological Education (ATE) Centers in developing faculty skills, cultivating partnerships, implementing new curricula, recruiting students, preparing for change, utilizing advisors, managing organizations, and nurturing leaders. In this report, ATE center leaders share with…

Illinois Manufacturing Technology Curriculum.

ERIC Educational Resources Information Center

Cliffe, Roger; And Others

This manufacturing technology curriculum involves students in learning problem-solving, communication, team building, quality control, safety, math, science, and technical skills. The document begins with a section on implementation, which gives background information on the purposes and development of the curriculum, explains its rationale,…

Poster session in instructional technology course

NASA Astrophysics Data System (ADS)

Diniaty, Artina; Fauzi'ah, Lina; Wulan Febriana, Beta; Arlianty, Widinda Normalia

2017-12-01

Instructional technology course must be studied by students in order to 1) understand the role of technology in learning, 2) capable of analyzing advantages and disadvantages of using technology in teaching, 3) capable of performing technology in teaching. A poster session in instructional technology course was performed to 1) enhance students' interest in this course and develop students' creativity. The step of this research includes: planning, implementation, and evaluation. The result showed that students' responses towards poster session in instructional technology course were good.

Distributed teaming on JPL projects

NASA Technical Reports Server (NTRS)

Baroff, L. E.

2002-01-01

This paper addresses structures, actions and technologies that contribute to real team development of a distributed team, and the leadership skills and tools that are used to implement that team development.

Quantum Gravity Gradiometer Development for Space

NASA Technical Reports Server (NTRS)

Kohel, James M.; Yu, Nan; Kellogg, James R.; Thompson, Robert J.; Aveline, David C.; Maleki, Lute

2006-01-01

Funded by the Advanced Technology Component Program, we have completed the development of a laboratory-based quantum gravity gradiometer based on atom interferometer technology. This is our first step towards a new spaceborne gradiometer instrument, which can significantly contribute to global gravity mapping and monitoring important in the understanding of the solid earth, ice and oceans, and dynamic processes. In this paper, we will briefly review the principles and technical benefits of atom-wave interferometer-based inertial sensors in space. We will then describe the technical implementation of the laboratory setup and report its status. We will also discuss our implementation plan for the next generation instrument.

Studying Teachers' Degree of Classroom Implementation, Teachers' Implementation Practices, and Students' Learning as Outcomes of K-12 STEM Professional Development

ERIC Educational Resources Information Center

Lin, Peiyi

2013-01-01

With a growing demand for an enhanced K-12 education for strengthening students' conceptual learning, interest, and career awareness in science, technology, engineering, and mathematics, teacher professional development projects have been viewed as an efficient approach. However, a variety of external and teacher factors may prevent such projects…

The Development of an Implementation Model for ICT in Education: An Example of the Interaction of Affordances and Multimodality

ERIC Educational Resources Information Center

Hadfield, Mark; Jopling, Michael

2014-01-01

This paper discusses the development of a model targeted at non-specialist practitioners implementing innovations that involve information and communication technology (ICT) in education. It is based on data from a national evaluation of ICT-based projects in initial teacher education, which included a large-scale questionnaire survey and six…

Progress towards and barriers to implementation of a risk framework for US federal wildland fire policy and decision making

Treesearch

David C. Calkin; Mark A. Finney; Alan A. Ager; Matthew P. Thompson; Krista M. Gebert

2011-01-01

In this paper we review progress towards the implementation of a riskmanagement framework for US federal wildland fire policy and operations. We first describe new developments in wildfire simulation technology that catalyzed the development of risk-based decision support systems for strategic wildfire management. These systems include new analytical methods to measure...

Barriers to implementation of risk management for federal wildland fire management agencies in the United States

Treesearch

Dave Calkin; Matthew P. Thompson; Alan A. Ager; Mark Finney

2010-01-01

In this presentation we review progress towards the implementation of a risk-based management framework for U.S. Federal wildland fire policy and operations. We first describe new developments in wildfire simulation technology that catalyzed the development of risk-based decision support systems for strategic wildfire management. These systems include new analytical...

A complex adaptive systems perspective of health information technology implementation.

PubMed

Keshavjee, Karim; Kuziemsky, Craig; Vassanji, Karim; Ghany, Ahmad

2013-01-01

Implementing health information technology (HIT) is a challenge because of the complexity and multiple interactions that define HIT implementation. Much of the research on HIT implementation is descriptive in nature and has focused on distinct processes such as order entry or decision support. These studies fail to take into account the underlying complexity of the processes, people and settings that are typical of HIT implementations. Complex adaptive systems (CAS) is a promising field that could elucidate the complexity and non-linear interacting issues that are typical in HIT implementation. Initially we sought new models that would enable us to better understand the complex nature of HIT implementation, to proactively identify problem issues that could be a precursor to unintended consequences and to develop new models and new approaches to successful HIT implementations. Our investigation demonstrates that CAS does not provide prediction, but forces us to rethink our HIT implementation paradigms and question what we think we know. CAS provides new ways to conceptualize HIT implementation and suggests new approaches to increasing HIT implementation successes.

Reflections on organizational issues in developing, implementing, and maintaining state Web-based data query systems.

PubMed

Love, Denise; Shah, Gulzar H

2006-01-01

Emerging technologies, such as Web-based data query systems (WDQSs), provide opportunities for state and local agencies to systematically organize and disseminate data to broad audiences and streamline the data distribution process. Despite the progress in WDQSs' implementation, led by agencies considered the "early adopters," there are still agencies left behind. This article explores the organizational issues and barriers to development of WDQSs in public health agencies and highlights factors facilitating the implementation of WDQSs.

Building Bridges between Technology and Content Literacy in Special Education: Lessons Learned from Special Educators' Use of Integrated Technology and Perceived Benefits for Students

ERIC Educational Resources Information Center

Ciampa, Katia

2017-01-01

This single-site case study describes the outcomes and lessons learned from the implementation of a technology professional development initiative aimed at helping three special education teachers from an urban elementary school learn how to infuse technology in their content literacy instruction. Three types of qualitative data were collected:…

Object/Shape Recognition Technology: An Assessment of the Feasibility of Implementation at Defense Logistics Agency Disposition Services

DTIC Science & Technology

2015-02-25

provide efficiency and effectively manufacture or inventory items. The industries that benefit from Cognex technology are automotive, food and beverage ...recognition tedmology, Tedmology Readiness Level, PAGES Cost Benefit Analysis, Tedmology Commercialization, Technology Transition 139 16. PRICE CODE 17...Technology Development & Transition Strategy Guidebook xvii UD Ultimate Disposal U.S. United States USAF United States Air Force xviii THIS

H.R. 4904, Technology-Related Assistance for Individuals with Disabilities Act of 1988. Hearing before the Subcommittee on Select Education of the Committee on Education and Labor. House of Representatives, One Hundredth Congress, Second Session.

ERIC Educational Resources Information Center

Congress of the U.S., Washington, DC. House Committee on Education and Labor.

Testimony is presented on H.R. 4904, "Technology-Related Assistance for Individuals with Disabilities Act of 1988." The legislation allows states to apply for grants to be used to develop and implement a consumer-responsive statewide program of technology-related assistance. States may develop the program by providing assistive…

Advanced 3-V semiconductor technology assessment. [space communications

NASA Technical Reports Server (NTRS)

Nowogrodzki, M.

1983-01-01

Against a background of an extensive survey of the present state of the art in the field of III-V semiconductors for operation at microwave frequencies (or gigabit rate speeds), likely requirements of future space communications systems are identified, competing technologies and physical device limitations are discussed, and difficulties in implementing emerging technologies are projected. On the basis of these analyses, specific research and development programs required for the development of future systems components are recommended.

Business Modeling to Implement an eHealth Portal for Infection Control: A Reflection on Co-Creation With Stakeholders.

PubMed

van Limburg, Maarten; Wentzel, Jobke; Sanderman, Robbert; van Gemert-Pijnen, Lisette

2015-08-13

It is acknowledged that the success and uptake of eHealth improve with the involvement of users and stakeholders to make technology reflect their needs. Involving stakeholders in implementation research is thus a crucial element in developing eHealth technology. Business modeling is an approach to guide implementation research for eHealth. Stakeholders are involved in business modeling by identifying relevant stakeholders, conducting value co-creation dialogs, and co-creating a business model. Because implementation activities are often underestimated as a crucial step while developing eHealth, comprehensive and applicable approaches geared toward business modeling in eHealth are scarce. This paper demonstrates the potential of several stakeholder-oriented analysis methods and their practical application was demonstrated using Infectionmanager as an example case. In this paper, we aim to demonstrate how business modeling, with the focus on stakeholder involvement, is used to co-create an eHealth implementation. We divided business modeling in 4 main research steps. As part of stakeholder identification, we performed literature scans, expert recommendations, and snowball sampling (Step 1). For stakeholder analyzes, we performed "basic stakeholder analysis," stakeholder salience, and ranking/analytic hierarchy process (Step 2). For value co-creation dialogs, we performed a process analysis and stakeholder interviews based on the business model canvas (Step 3). Finally, for business model generation, we combined all findings into the business model canvas (Step 4). Based on the applied methods, we synthesized a step-by-step guide for business modeling with stakeholder-oriented analysis methods that we consider suitable for implementing eHealth. The step-by-step guide for business modeling with stakeholder involvement enables eHealth researchers to apply a systematic and multidisciplinary, co-creative approach for implementing eHealth. Business modeling becomes an active part in the entire development process of eHealth and starts an early focus on implementation, in which stakeholders help to co-create the basis necessary for a satisfying success and uptake of the eHealth technology.

SMART SKINS - A Development Roadmap

NASA Astrophysics Data System (ADS)

Lochocki, Joseph M.

1990-02-01

The Air Force Project Forecast II identified a number of key technology initiatives for development. This paper addresses one such initiative, PT-16, Smart Skins. The concept of the Smart Skin is introduced by briefly highlighting its attributes and potential advantages over standard avionics packaging and maintenance, and then goes on to describe some of the key ingredients necessary for its development. Problem areas are brought out along with some of the required trades that must be made. Finally, a time phased development roadmap is introduced which shows Calspan's proposed sequence of technology development programs that can, in combination, lead to first functional Smart Skins implementations in narrowband form in the late 1990's and in wideband form in first decade of the twenty - first century. A Smart Skins implementation in integral aircraft skin structure form will take at least until 2010.

Technology for Climate Change Adaptation in Nepal Himalaya: Policy, Practices and Perspective

NASA Astrophysics Data System (ADS)

Gautam, K.; Panthi, J., Sr.

2016-12-01

The recent scientific findings and the periodic reports corroborated by IPCC has disclosed the climate change is unequivocal and the Himalayan region is one of the hardest hit by the change and variability in climatic system due to its sensitive ecosystem, low resilience capacity and geographical extremes. Nepal, which lies in the central Himalayan region, has developed its strategies to mitigate the impacts of climate change by developing national, regional and local plan of actions which are being implemented and some of them have already been proven. Nepal, as a party to the UNFCCC, has accomplished technology need assessment that identifies the need for new technology, equipment, knowledge and skills for reducing vulnerability to climate change. The plan has recommended an enabling framework for the diffusion of the prioritized technologies and the actions necessary to reduce or remove policy finance and technology related barriers. This paper aims to analyze the technological penetration in national level policy instruments such as NAPA, LAPA, Climate Change Policy and how those technologies have been used in actual field during the implementation of LAPA activities in western Nepal taking two administrative districts, one from low land and another from highland, as a pilot study.

Implementation of a Substance Use Recovery Support Mobile Phone App in Community Settings: Qualitative Study of Clinician and Staff Perspectives of Facilitators and Barriers.

PubMed

Lord, Sarah; Moore, Sarah K; Ramsey, Alex; Dinauer, Susan; Johnson, Kimberly

2016-06-28

Research supports the effectiveness of technology-based treatment approaches for substance use disorders. These approaches have the potential to broaden the reach of evidence-based care. Yet, there is limited understanding of factors associated with implementation of technology-based care approaches in different service settings. In this study, we explored provider and staff perceptions of facilitators and barriers to implementation of a mobile phone substance use recovery support app with clients in 4 service settings. Interviews were conducted with leadership and provider stakeholders (N=12) from 4 agencies in the first year of an implementation trial of the mobile phone app. We used the Consolidated Framework for Implementation Research as the conceptual foundation for identifying facilitators and barriers to implementation. Implementation process facilitators included careful planning of all aspects of implementation before launch, engaging a dedicated team to implement and foster motivation, working collaboratively with the app development team to address technical barriers and adapt the app to meet client and agency needs, and consistently reviewing app usage data to inform progress. Implementation support strategies included training all staff to promote organization awareness about the recovery support app and emphasize its priority as a clinical care tool, encouraging clients to try the technology before committing to use, scaling rollout to clients, setting clear expectations with clients about use of the app, and using peer coaches and consistent client-centered messaging to promote engagement. Perceived compatibility of the mobile phone app with agency and client needs and readiness to implement emerged as salient agency-level implementation facilitators. Facilitating characteristics of the recovery support app itself included evidence of its impact for recovery support, perceived relative advantage of the app over usual care, the ability to adapt the app to improve client use, and its ease of use. The mobile phone itself was a strong motivation for clients to opt in to use the app in settings that provided phones. App access was limited in settings that did not provide phones owing to lack of mobile phone ownership or incompatibility of the app with clients' mobile phones. Individual differences in technology literacy and provider beliefs about substance use care either facilitated or challenged implementation. Awareness of patient needs and resources facilitated implementation, whereas external policies and regulations regarding technology use introduced barriers to implementation. The conceptually grounded facilitators and barriers identified in this study can guide systematic targeting of strategies to improve implementation of mobile phone interventions in community treatment settings. Results also inform the design of technology-based therapeutic tools. This study highlights directions for research with regard to implementation of technology-based behavioral health care approaches.

Implementation of a Substance Use Recovery Support Mobile Phone App in Community Settings: Qualitative Study of Clinician and Staff Perspectives of Facilitators and Barriers

PubMed Central

Moore, Sarah K; Ramsey, Alex; Dinauer, Susan; Johnson, Kimberly

2016-01-01

Background Research supports the effectiveness of technology-based treatment approaches for substance use disorders. These approaches have the potential to broaden the reach of evidence-based care. Yet, there is limited understanding of factors associated with implementation of technology-based care approaches in different service settings. Objectives In this study, we explored provider and staff perceptions of facilitators and barriers to implementation of a mobile phone substance use recovery support app with clients in 4 service settings. Methods Interviews were conducted with leadership and provider stakeholders (N=12) from 4 agencies in the first year of an implementation trial of the mobile phone app. We used the Consolidated Framework for Implementation Research as the conceptual foundation for identifying facilitators and barriers to implementation. Results Implementation process facilitators included careful planning of all aspects of implementation before launch, engaging a dedicated team to implement and foster motivation, working collaboratively with the app development team to address technical barriers and adapt the app to meet client and agency needs, and consistently reviewing app usage data to inform progress. Implementation support strategies included training all staff to promote organization awareness about the recovery support app and emphasize its priority as a clinical care tool, encouraging clients to try the technology before committing to use, scaling rollout to clients, setting clear expectations with clients about use of the app, and using peer coaches and consistent client-centered messaging to promote engagement. Perceived compatibility of the mobile phone app with agency and client needs and readiness to implement emerged as salient agency-level implementation facilitators. Facilitating characteristics of the recovery support app itself included evidence of its impact for recovery support, perceived relative advantage of the app over usual care, the ability to adapt the app to improve client use, and its ease of use. The mobile phone itself was a strong motivation for clients to opt in to use the app in settings that provided phones. App access was limited in settings that did not provide phones owing to lack of mobile phone ownership or incompatibility of the app with clients’ mobile phones. Individual differences in technology literacy and provider beliefs about substance use care either facilitated or challenged implementation. Awareness of patient needs and resources facilitated implementation, whereas external policies and regulations regarding technology use introduced barriers to implementation. Conclusions The conceptually grounded facilitators and barriers identified in this study can guide systematic targeting of strategies to improve implementation of mobile phone interventions in community treatment settings. Results also inform the design of technology-based therapeutic tools. This study highlights directions for research with regard to implementation of technology-based behavioral health care approaches. PMID:27352884

Health information technology and implementation science: partners in progress in the VHA.

PubMed

Hynes, Denise M; Whittier, Erika R; Owens, Arika

2013-03-01

The Department of Veterans Affairs (VA) Quality Enhancement Research Initiative (QUERI) has demonstrated how implementation science can enhance the quality of health care. During this time an increasing number of implementation research projects have developed or utilized health information technology (HIT) innovations to leverage the VA's electronic health record and information systems. To describe the HIT approaches used and to characterize the facilitators and barriers to progress within implementation research projects in the VA QUERI program. Nine case studies were selected from among 88 projects and represented 8 of 14 HIT categories identified. Each case study included key informants whose roles on the project were principal investigator, implementation science and informatics development. We conducted documentation analysis and semistructured in-person interviews with key informants for each of the 9 case studies. We used qualitative analysis software to identify and thematically code information and interview responses. : Thematic analyses revealed 3 domains or pathways critical to progression through the QUERI steps. These pathways addressed: (1) compliance and collaboration with information technology policies and procedures; (2) operating within organizational policies and building collaborations with end users, clinicians, and administrators; and (3) obtaining and maintaining research resources and approvals. Sustained efforts in HIT innovation and in implementation science in the Veterans Health Administration demonstrates the interdependencies of these initiatives and the critical pathways that can contribute to progress. Other health care quality improvement efforts that rely on HIT can learn from the Veterans Health Administration experience.

PrediCTC, liquid biopsy in precision oncology: a technology transfer experience in the Spanish health system.

PubMed

Alonso-Alconada, L; Barbazan, J; Candamio, S; Falco, J L; Anton, C; Martin-Saborido, C; Fuster, G; Sampedro, M; Grande, C; Lado, R; Sampietro-Colom, L; Crego, E; Figueiras, S; Leon-Mateos, L; Lopez-Lopez, R; Abal, M

2018-05-01

Management of metastatic disease in oncology includes monitoring of therapy response principally by imaging techniques like CT scan. In addition to some limitations, the irruption of liquid biopsy and its application in personalized medicine has encouraged the development of more efficient technologies for prognosis and follow-up of patients in advanced disease. PrediCTC constitutes a panel of genes for the assessment of circulating tumor cells (CTC) in metastatic colorectal cancer patients, with demonstrated improved efficiency compared to CT scan for the evaluation of early therapy response in a multicenter prospective study. In this work, we designed and developed a technology transfer strategy to define the market opportunity for an eventual implementation of PrediCTC in the clinical practice. This included the definition of the regulatory framework, the analysis of the regulatory roadmap needed for CE mark, a benchmarking study, the design of a product development strategy, a revision of intellectual property, a cost-effectiveness study and an expert panel consultation. The definition and analysis of an appropriate technology transfer strategy and the correct balance among regulatory, financial and technical determinants are critical for the transformation of a promising technology into a viable technology, and for the decision of implementing liquid biopsy in the monitoring of therapy response in advanced disease.

Propulsion Risk Reduction Activities for Non-Toxic Cryogenic Propulsion

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Klem, Mark D.; Fisher, Kenneth

2010-01-01

The Propulsion and Cryogenics Advanced Development (PCAD) Project s primary objective is to develop propulsion system technologies for non-toxic or "green" propellants. The PCAD project focuses on the development of non-toxic propulsion technologies needed to provide necessary data and relevant experience to support informed decisions on implementation of non-toxic propellants for space missions. Implementation of non-toxic propellants in high performance propulsion systems offers NASA an opportunity to consider other options than current hypergolic propellants. The PCAD Project is emphasizing technology efforts in reaction control system (RCS) thruster designs, ascent main engines (AME), and descent main engines (DME). PCAD has a series of tasks and contracts to conduct risk reduction and/or retirement activities to demonstrate that non-toxic cryogenic propellants can be a feasible option for space missions. Work has focused on 1) reducing the risk of liquid oxygen/liquid methane ignition, demonstrating the key enabling technologies, and validating performance levels for reaction control engines for use on descent and ascent stages; 2) demonstrating the key enabling technologies and validating performance levels for liquid oxygen/liquid methane ascent engines; and 3) demonstrating the key enabling technologies and validating performance levels for deep throttling liquid oxygen/liquid hydrogen descent engines. The progress of these risk reduction and/or retirement activities will be presented.

Propulsion Risk Reduction Activities for Nontoxic Cryogenic Propulsion

NASA Technical Reports Server (NTRS)

Smith, Timothy D.; Klem, Mark D.; Fisher, Kenneth L.

2010-01-01

The Propulsion and Cryogenics Advanced Development (PCAD) Project s primary objective is to develop propulsion system technologies for nontoxic or "green" propellants. The PCAD project focuses on the development of nontoxic propulsion technologies needed to provide necessary data and relevant experience to support informed decisions on implementation of nontoxic propellants for space missions. Implementation of nontoxic propellants in high performance propulsion systems offers NASA an opportunity to consider other options than current hypergolic propellants. The PCAD Project is emphasizing technology efforts in reaction control system (RCS) thruster designs, ascent main engines (AME), and descent main engines (DME). PCAD has a series of tasks and contracts to conduct risk reduction and/or retirement activities to demonstrate that nontoxic cryogenic propellants can be a feasible option for space missions. Work has focused on 1) reducing the risk of liquid oxygen/liquid methane ignition, demonstrating the key enabling technologies, and validating performance levels for reaction control engines for use on descent and ascent stages; 2) demonstrating the key enabling technologies and validating performance levels for liquid oxygen/liquid methane ascent engines; and 3) demonstrating the key enabling technologies and validating performance levels for deep throttling liquid oxygen/liquid hydrogen descent engines. The progress of these risk reduction and/or retirement activities will be presented.

SO x /NO x Removal from Flue Gas Streams by Solid Adsorbents: A Review of Current Challenges and Future Directions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rezaei, Fateme; Rownaghi, Ali A.; Monjezi, Saman

One of the main challenges in the power and chemical industries is to remove generated toxic or environmentally harmful gases before atmospheric emission. To comply with stringent environmental and pollutant emissions control regulations, coal-fired power plants must be equipped with new technologies that are efficient and less energy-intensive than status quo technologies for flue gas cleanup. While conventional sulfur oxide (SOx) and nitrogen oxide (NOx) removal technologies benefit from their large-scale implementation and maturity, they are quite energy-intensive. In view of this, the development of lower-cost, less energy-intensive technologies could offer an advantage. Significant energy and cost savings can potentiallymore » be realized by using advanced adsorbent materials. One of the major barriers to the development of such technologies remains the development of materials that are efficient and productive in removing flue gas contaminants. In this review, adsorption-based removal of SOx/NOx impurities from flue gas is discussed, with a focus on important attributes of the solid adsorbent materials as well as implementation of the materials in conventional and emerging acid gas removal technologies. The requirements for effective adsorbents are noted with respect to their performance, key limitations, and suggested future research directions. The final section includes some key areas for future research and provides a possible roadmap for the development of technologies for the removal of flue gas impurities that are more efficient and cost-effective than status quo approaches.« less

Bio-markers: traceability in food safety issues.

PubMed

Raspor, Peter

2005-01-01

Research and practice are focusing on development, validation and harmonization of technologies and methodologies to ensure complete traceability process throughout the food chain. The main goals are: scale-up, implementation and validation of methods in whole food chains, assurance of authenticity, validity of labelling and application of HACCP (hazard analysis and critical control point) to the entire food chain. The current review is to sum the scientific and technological basis for ensuring complete traceability. Tracing and tracking (traceability) of foods are complex processes due to the (bio)markers, technical solutions and different circumstances in different technologies which produces various foods (processed, semi-processed, or raw). Since the food is produced for human or animal consumption we need suitable markers to be stable and traceable all along the production chain. Specific biomarkers can have a function in technology and in nutrition. Such approach would make this development faster and more comprehensive and would make possible that food effect could be monitored with same set of biomarkers in consumer. This would help to develop and implement food safety standards that would be based on real physiological function of particular food component.

NASA Goddard Thermal Technology Overview 2017

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2017-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 17 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology Implementation on current flight programs will be reviewed, and the recent push for CubeSat mission development will also be addressed. Many of these technologies also have broad applicability to DOD (Dept. of Defense), DOE (Dept. of the Environment), and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

NASA Goddard Thermal Technology Overview 2016

NASA Technical Reports Server (NTRS)

Butler, Dan; Swanson, Ted

2016-01-01

This presentation summarizes the current plans and efforts at NASA Goddard to develop new thermal control technology for anticipated future missions. It will also address some of the programmatic developments currently underway at NASA, especially with respect to the NASA Technology Development Program. The effects of the recently enacted FY 16 NASA budget, which includes a sizeable increase, will also be addressed. While funding for basic technology development is still tight, significant efforts are being made in direct support of flight programs. Thermal technology implementation on current flight programs will be reviewed, and the recent push for Cube-sat mission development will also be addressed. Many of these technologies also have broad applicability to DOD, DOE, and commercial programs. Partnerships have been developed with the Air Force, Navy, and various universities to promote technology development. In addition, technology development activities supported by internal research and development (IRAD) program and the Small Business Innovative Research (SBIR) program are reviewed in this presentation. Specific technologies addressed include; two-phase systems applications and issues on NASA missions, latest developments of electro-hydrodynamically pumped systems, Atomic Layer Deposition (ALD), Micro-scale Heat Transfer, and various other research activities.

The NASA L3 Study

NASA Technical Reports Server (NTRS)

Stebbins, Robin

2016-01-01

The Astrophysics Implementation Plan calls for a minority role in L3, planned for launch in 2034. L3 The third large mission in ESAs Cosmic Visions 2015-2025 Programme NASA and ESA have been discussing a collaboration for 2 years Gravitational Observatory Advisory Team (GOAT) ESA study evaluating and recommend scientific performance tradeoffs, detection technologies, technology development activities, data analysis capabilities, schedule and cost US representatives: Guido Mueller, Mark Kasevich, Bill Klipstein, RTS Started in October 2014, concluding with a final report in late Marchor early April 2016. ESA solicited interest from ESA Member States in November 2015 NASA is continuing technology development support. ESA is restarting technology development activities.

Development of an Ultraflex-Based Thin Film Solar Array for Space Applications

NASA Technical Reports Server (NTRS)

White, Steve; Douglas, Mark; Spence, Brian; Jones, P. Alan; Piszczor, Michael F.

2003-01-01

As flexible thin film photovoltaic (FTFPV) cell technology is developed for space applications, integration into a viable solar array structure that optimizes the attributes of this cell technology is critical. An advanced version of ABLE'sS UltraFlex solar array platform represents a near-term, low-risk approach to demonstrating outstanding array performance with the implementation of FTFPV technology. Recent studies indicate that an advanced UltraFlex solar array populated with 15% efficient thin film cells can achieve over 200 W/kg EOL. An overview on the status of hardware development and the future potential of this technology is presented.

A Rural Implementation of a 52 Node Mixed Wireless Mesh Network in Macha, Zambia

NASA Astrophysics Data System (ADS)

Backens, Jonathan; Mweemba, Gregory; van Stam, Gertjan

In spite of increasing international and academic attention, there remains many challenges facing real world implementations of developing technologies. There has been considerable hype behind Wireless Mesh Networking as the ubiquitous solution for rural ICT in the developing world. In this paper, we present the real world rural mesh network implementation in the village of Macha, Zambia and draw both performance conclusions as well as overall experiential conclusions. The purpose of this paper is to introduce and analyze our low cost solution and extrapolate future trends for rural ICT implementations in Zambia.

Social Capital, Empowerment and Educational Change: A Scenario of Permeation of One-to-One Technology in School

ERIC Educational Resources Information Center

Li, Sandy C.

2010-01-01

The standard model of technology diffusion argues that changing teachers' perceptions and epistemological beliefs about the value of an innovation is conducive to successful implementation. It is believed that teachers' receptiveness to technology and a re-conceptualization of its role in teaching and learning can drive the development of new…

78 FR 69773 - Approval and Promulgation of Implementation Plans; Texas; Control of Air Pollution by Permits for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... advancement and development of new technologies. FutureGen refers to a combination of technologies for carbon... National Technology Transfer and Advancement Act of 1995 (15 U.S.C. 272 note) because application of those... Business Information (CBI) or other information the disclosure of which is restricted by statute. Do not...

Barriers to the Implementation of Electronic Learning in Governmental Organizations: Case of Iran

ERIC Educational Resources Information Center

Jahromi, Gelayol Safavi; Nikabadi, Mohsen Shafiei; Maleki, Morteza

2017-01-01

New developments in technology, particularly the information technology, have changed the perception of learning. These changes have made distance learning an important part of education. However, it seems that this technology does not have a strong position in governmental organizations yet. Therefore, the main goal of this research is to present…

Evaluation of Hydrogel Technologies for the Decontamination ...

EPA Pesticide Factsheets

Report This current research effort was developed to evaluate intermediate level (between bench-scale and large-scale or wide-area implementation) decontamination procedures, materials, technologies, and techniques used to remove radioactive material from different surfaces. In the event of such an incident, application of this technology would primarily be intended for decontamination of high-value buildings, important infrastructure, and landmarks.

The Growth of m-Learning and the Growth of Mobile Computing: Parallel Developments

ERIC Educational Resources Information Center

Caudill, Jason G.

2007-01-01

m-Learning is made possible by the existence and application of mobile hardware and networking technology. By exploring the capabilities of these technologies, it is possible to construct a picture of how different components of m-Learning can be implemented. This paper will explore the major technologies currently in use: portable digital…

Supporting Friendly Atmosphere in a Classroom by Technology Implementation

ERIC Educational Resources Information Center

Lukaš, Mirko

2014-01-01

Extremely rapid development of information technology and the lack of monopoly in the technological market have resulted in a sudden price reduction of the informatic equipment and gadgets enabling them to be used in all segments of a human life, hence the education as well. In the modern, digital era it is almost impossible to make any…

A Legal Analysis of Federal Disability Law as Related to Emerging Technology: Guidelines for Postsecondary Leadership, Policy, and Practice

ERIC Educational Resources Information Center

Ford, Roderick Dwayne

2014-01-01

This dissertation identified and described the legal requirements imposed by federal disability mandates and case law related to emerging technology. Additionally, the researcher created a legal framework (guidelines) for higher education institutions to consider during policy development and implementation of emerging technology by providing an…

Experience in Use of Project Method during Technology Lessons in Secondary Schools of the USA

ERIC Educational Resources Information Center

Sheludko, Inna

2015-01-01

The article examines the opportunities and prospects for the use of experience of project method during "technology lessons" in US secondary schools, since the value of project technology implementation experience into the educational process in the USA for ensuring holistic development of children, preparing them for adult life, in…

A Theoretical Model of Health Information Technology Usage Behaviour with Implications for Patient Safety

ERIC Educational Resources Information Center

Holden, Richard J.; Karsh, Ben-Tzion

2009-01-01

Primary objective: much research and practice related to the design and implementation of information technology in health care has been atheoretical. It is argued that using extant theory to develop testable models of health information technology (HIT) benefits both research and practice. Methods and procedures: several theories of motivation,…

The Design and Implementation of Authentic Learning with Mobile Technology in Vocational Nursing Practice Course

ERIC Educational Resources Information Center

Pu, Ying-Hung; Wu, Ting-Ting; Chiu, Po-Sheng; Huang, Yueh-Min

2016-01-01

In recent years, along with the development of mobile technology, vocational nursing education has improved greatly. In light of this emerging mobile technology, it brings the clinical practice of vocational nursing education closer to authentic learning than ever. In fact, some studies revealed that learners' learn states and learning outcomes…

Beyond the Workshop: Educational Policy in Situated Practice.

ERIC Educational Resources Information Center

Jenson, Jennifer; Lewis, Brian

2001-01-01

Identifies questions arising from implementation of computer-based technologies in Canadian schools--questions of public policy in an increasingly technocentric and commercialized environment, of investment in technological infrastructure, and of teachers' professional development and its effectiveness. Lists necessary factors for the success of…

Telecommunications and data acquisition

NASA Technical Reports Server (NTRS)

Renzetti, N. A. (Editor)

1981-01-01

Deep Space Network progress in flight project support, tracking and data acquisition research and technology, network engineering, hardware and software implementation, and operations is reported. In addition, developments in Earth based radio technology as applied to geodynamics, astrophysics, and the radio search for extraterrestrial intelligence are reported.

75 FR 26203 - Implementing the National Broadband Plan by Empowering Consumers and the Smart Grid: Data Access...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-11

... good example of an enabling Smart Grid technology that can empower both utilities and consumers to... Information and Communication Technologies (ICT) sector by integrating broadband into the developing Smart...'s years [[Page 26204

Systems Engineering Applied to the Development of a Wave Energy Farm.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, Jesse D.; Bull, Diana L.; Costello, Ronan Patrick

A motivation for undertaking this stakeholder requirements analysis and Systems Engineering exercise is to document the requirements for successful wave energy farms to facilitate better design and better design assessments. A difficulty in wave energy technology development is the absence to date of a verifiable minimum viable product against which the merits of new products might be measured. A consequence of this absence is that technology development progress, technology value, and technology funding have largely been measured, associated with, and driven by technology readiness, measured in technology readiness levels (TRLs). Originating primarily from the space and defense industries, TRLs focusmore » on procedural implementation of technology developments of large and complex engineering projects, where cost is neither mission critical nor a key design driver. The key deficiency with the TRL approach in the context of wave energy conversion is that WEC technology development has been too focused on commercial readiness and not enough on the stakeholder requirements and particularly economic viability required for market entry.« less

Transformational Technologies to Expedite Space Access and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rather, John D. G.

Throughout history the emergence of new technologies has enabled unforeseen breakthrough capabilities that rapidly transformed the world. Some global examples from the twentieth century include AC electric power, nuclear energy, and turbojet engines. At the systems level, success of both Apollo and the Space Shuttle programs depended upon taming hydrogen propulsion and developing high-temperature atmospheric reentry materials. Human space development now is stymied because of a great need for breakthrough technologies and strategies. It is believed that new capabilities exist within the present states-of-the-art of superconducting technology that can be implemented to transform the future of human space development. Thismore » paper is an overview of three other papers presented within this forum, which summarizes the principles and consequences of StarTram, showing how the resulting breakthrough advantages can lead directly to safe space tourism and massive development of the moon, Mars and the outer solar system. StarTram can implement cost-effective solar power from space, simple utilization of asteroid material to protect humans from ionizing radiation, and effective defense of the Earth from devastating cosmic impacts. Synergistically, StarTram technologies will revolutionize ground transportation on the Earth, leading to enormous reduction in energy consumption and creation of millions of jobs. High energy lasers will also be discussed because of their importance to power beaming applications.« less

Professional Development for Promoting 21st Century Skills and Common Core State Standards in Foreign Language and Social Studies Classrooms

ERIC Educational Resources Information Center

Beriswill, Joanne Elizabeth; Bracey, Pamela Scott; Sherman-Morris, Kathleen; Huang, Kun; Lee, Sang Joon

2016-01-01

To help satisfy the pressing need for technology-related professional development for in-service teachers, the Global Academic Essentials Teacher Institute (GAETI) was implemented to provide in-service foreign language and social studies teachers with content, pedagogy, and technology explorations centered on the teaching of the Common Core State…

Using the Technology of Critical Thinking Development (CTD) as a Means of Forming Competencies of Students Majoring in "Life Safety"

ERIC Educational Resources Information Center

Kayumova, Leysan R.; Morozova, Marina A.

2016-01-01

The relevance of the research problem is caused by the need to use various teaching methods and techniques in training students majoring in pedagogical specialties while implementing the competency approach in education. Information about the technology of critical thinking development (CTD) in future teachers training is limited, and the…

Towards the Development of a Model for Hardware Standards in Information Technology Procurement: Factors for Consideration

ERIC Educational Resources Information Center

Ryan, David L.

2010-01-01

While research in academic and professional information technology (IT) journals address the need for strategic alignment and defined IT processes, there is little research about what factors should be considered when implementing specific IT hardware standards in an organization. The purpose of this study was to develop a set of factors for…

Development and Implementation of Science and Technology Ethics Education Program for Prospective Science Teachers

ERIC Educational Resources Information Center

Rhee, Hyang-yon; Choi, Kyunghee

2014-01-01

The purposes of this study were (1) to develop a science and technology (ST) ethics education program for prospective science teachers, (2) to examine the effect of the program on the perceptions of the participants, in terms of their ethics and education concerns, and (3) to evaluate the impact of the program design. The program utilized…

Transforming revenue management.

PubMed

Silveria, Richard; Alliegro, Debra; Nudd, Steven

2008-11-01

Healthcare organizations that want to undertake a patient administrative/revenue management transformation should: Define the vision with underlying business objectives and key performance measures. Strategically partner with key vendors for business process development and technology design. Create a program organization and governance infrastructure. Develop a corporate design model that defines the standards for operationalizing the vision. Execute the vision through technology deployment and corporate design model implementation.

The planning cycle.

PubMed

Johnson, William

2005-01-01

Information technology planning can be described as a continuous cyclical process composed of three phases whose primary purpose is optimum allocation of scarce resources. In the assessment phase, planners assess user needs, environmental factors, business objectives, and IT infrastructure needs to develop IT projects that address needs in each of these areas. A major goal of this phase is to develop a broad IT inventory. The prioritization phase seeks to ensure optimum allocation of scarce resources by prioritizing ITprojects based on: Costs--total life cycle costs. Benefits--both quantitative and non-quantitative, including support for the organization's strategic business objectives. Risks--subjective assessments of technological and non-technological risks. Implementation requirements--time and personnel requirements to implement the system. The scheduling phase incorporates sequencing considerations, personnel availability, and budgetary constraints to produce an IT plan in which project priorities are adjusted to meet organizational realities.

Understanding BIM Adoption in the AEC Industry: The Case of Jordan

NASA Astrophysics Data System (ADS)

Btoush, M.; Haron, AT

2017-11-01

Building information modelling (BIM) is a new and powerful technology implemented by many countries. The construction industry in Jordan plays a vital role and contributes immensely to the economic growth and development. In order to boost the industry and the economy, many industry players including engineers and contractors have recommended the implementation of BIM in Jordan. However, research demonstrates that successful BIM implementation is possible through the awareness of the different levels of BIM, which is a basic precondition for BIM implementation. Without a clear understanding of BIM, many companies would be unable to fully achieve BIM potentials or implement BIM in their building lifecycle. The objective of this study is to assess the current awareness of BIM technology in the Jordanian construction industry. A field interviews were conducted and 15 responses were collected and. The findings indicate that a significant proportion of respondents have little or no understanding of the concept of BIM. Also, the usage was found to be very low. Based on the results, a holistic roadmap was developed to spread the BIM adoption through the Jordanian construction industry. It is expected that this roadmap would lead to a better understanding and enable the industry towards more extensive implementation of BIM.

Implementation of the Arsenic Biosand Filter in Nepal

NASA Astrophysics Data System (ADS)

Murcott, S.; Ngai, T.; Shrestha, R.; Pokharel, K.; Walewijk, S.

2004-05-01

A low-cost, household-scale drinking water filter, the Arsenic Biosand Filter (ABF), appropriate for rural Nepal, was developed by researchers at Massachusetts Institute of Technology and two local partners (ENPHO and RWSSSP) to simultaneously remove arsenic and pathogens from tubewell water. The project implementation site is the Terai region of southern Nepal, where about 90% of people receive water from tubewells and where about 25+% and 40+% of tubewells are contaminated with arsenic (naturally-occurring) and coliforms (from human and animal sources) respectively, causing severe health consequences such as cancers and gastrointestinal illnesses. Despite growing recognition of the immediacy of the arsenic crisis in this region, many previous arsenic technology projects have failed. This is because many of the available technologies have serious drawbacks, including complex production methods, high maintenance, high costs, insufficient filtration rate, and/or reliance on materials unavailable in remote villages. In addition, most technologies treat arsenic and pathogens independently, resulting in complicated treatment operations. Implementation deficiencies including ineffective technology transfer, confusing NGO responsibilities, organizational non-sustainability, lack of user education and contribution, and inadequate long-term maintenance and monitoring capacity are other major problems. The ABF design is optimized based on the socio-economic conditions of rural Terai and is constructed using locally available labor and materials. It was the only arsenic remediation technology to win the prestigious World Bank Development Marketplace Competition in 2003. Funding from this prize will provide start-up capital to pilot a technology transfer network. In 2004, the team has established an in-country technology dissemination and implementation center and is building local capacity in arsenic-affected villages towards long-term, self-reliant, user-participatory safe water provision, involving training of local women, entrepreneurs, trainers, teachers, and local authorities. A laboratory and three month pilot study conducted in Nepal from September 2002 to January 2003 found that the ABF removed arsenic (range = 87 to 96%, mean = 93%), total coliform (range = 0 to 99%, mean = 58%), E. Coli (range = 0 to >99%, mean = 64%), and iron (range = >90 to >97 %, mean = >93%). This presentation will report on the results of the 2004 ABF implementation program in 25 villages in Nepal, targeting an overall population of 10,000 people and will discuss the ABF technology in the context of other similar low-cost household scale approaches to remediation of arsenic-contaminated groundwater.

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

Using a Consensus Conference to Characterize Regulatory Concerns Regarding Bioremediation of Radionuclides and Heavy Metals in Mixed Waste at DOE Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Denise Lach; Stephanie Sanford

2006-09-01

A consensus workshop was developed and convened with ten state regulators to characterize concerns regarding emerging bioremediation technology to be used to clean-up radionuclides and heavy metals in mixed wastes at US DOE sites. Two questions were explored: integrated questions: (1) What impact does participation in a consensus workshop have on the knowledge, attitudes, and practices of state regulators regarding bioremediation technology? (2) How effective is a consensus workshop as a strategy for eliciting and articulating regulators’ concerns regarding the use of bioremediation to clean up radionuclides and heavy metals in mixed wastes at U.S. Department of Energy Sites aroundmore » the county? State regulators met together for five days over two months to learn about bioremediation technology and develop a consensus report of their recommendations regarding state regulatory concerns. In summary we found that panel members: - quickly grasped the science related to bioremediation and were able to effectively interact with scientists working on complicated issues related to the development and implementation of the technology; - are generally accepting of in situ bioremediation, but concerned about costs, implementation (e.g., institutional controls), and long-term effectiveness of the technology; - are concerned equally about technological and implementation issues; and - believed that the consensus workshop approach to learning about bioremediation was appropriate and useful. Finally, regulators wanted decision makers at US DOE to know they are willing to work with DOE regarding innovative approaches to clean-up at their sites, and consider a strong relationship between states and the DOE as critical to any effective clean-up. They do not want perceive themselves to be and do not want others to perceive them as barriers to successful clean-up at their sites.« less

Johnson Space Center Research and Technology Report

NASA Technical Reports Server (NTRS)

Pido, Kelle; Davis, Henry L. (Technical Monitor)

1999-01-01

As the principle center for NASA's Human Exploration and Development of Space (HEDS) Enterprise, the Johnson Space Center (JSC) leads NASA's development of human spacecraft, human support systems, and human spacecraft operations. To implement this mission, JSC has focused on developing the infrastructure and partnerships that enable the technology development for future NASA programs. In our efforts to develop key technologies, we have found that collaborative relationships with private industry and academia strengthen our capabilities, infuse innovative ideas, and provide alternative applications for our development projects. The American public has entrusted NASA with the responsibility for space--technology development, and JSC is committed to the transfer of the technologies that we develop to the private sector for further development and application. It is our belief that commercialization of NASA technologies benefits both American industry and NASA through technology innovation and continued partnering. To this end, we present the 1998-1999 JSC Research and Technology Report. As your guide to the current JSC technologies, this report showcases the projects in work at JSC that may be of interest to U.S. industry, academia, and other government agencies (federal, state, and local). For each project, potential alternative uses and commercial applications are described.

The impact of new and emerging technologies in the commercial aviation maintenance, repair, and overhaul industry a Delphi study

NASA Astrophysics Data System (ADS)

Gray, Janet

Purpose. The purpose of this study was to identify new or emerging technological trends and events that are likely to occur between now and 2017 that will have an impact on the commercial aviation maintenance, repair, and overhaul (MRO) industry. Further, it was the purpose of this study to examine those technological trends and events believed to provide the greatest impact and, given the experts' analysis, identify the feasibility of implementation. Methodology. This descriptive study utilized the Delphi method with a panel of twenty-four experts comprised of practitioners, theorists, and futurists. A priority matrix was utilized to determine the impact and feasibility of trend and events. Findings. The experts identified fifty-three trends and events that will impact the commercial aviation maintenance, repair, and overhaul (MRO) industry. Analysis of the priority matrix revealed eighteen trends and events were of high priority and high feasibility. Conclusions. The responses from the expert panel were examined and the findings analyzed. The following are the conclusions constructed from the data provided by the Delphi panel of experts: (1) the need to respond to the demands of the maintenance, repair, and overhaul (MRO) industry such as down time, efficiency, cost, and environmental concerns by implementing new technology, (2) the demand to integrate and implement new technology as indicative of the priority matrix scoring high importance/high feasibility, (3) to proactively address the inadequate professional development in new technologies, and (4) the consensus reached by the panel of experts of importance and feasibility of implementation of new technologies encompass eighteen trends and events. Implications and recommendations for action. The implementation of new and emerging technological advances in the commercial aviation maintenance, repair, and overhaul (MRO) industry between now and 2017 will be dependent on the technologies' capacity to reduce downtime and increase efficiency. In order to maintain America's global leadership in aviation, integration of innovated technology is key.

Access to augmentative and alternative communication: new technologies and clinical decision-making.

PubMed

Fager, Susan; Bardach, Lisa; Russell, Susanne; Higginbotham, Jeff

2012-01-01

Children with severe physical impairments require a variety of access options to augmentative and alternative communication (AAC) and computer technology. Access technologies have continued to develop, allowing children with severe motor control impairments greater independence and access to communication. This article will highlight new advances in access technology, including eye and head tracking, scanning, and access to mainstream technology, as well as discuss future advances. Considerations for clinical decision-making and implementation of these technologies will be presented along with case illustrations.

Resource and Technology: A beacon for change in the reform of Jamaica's secondary education system - or a "pipedream"?

NASA Astrophysics Data System (ADS)

Jennings, Zellynne

2012-04-01

Different strategies are being employed worldwide to prepare school-leavers for the world of work. Central to the Reform of Secondary Education (ROSE) in Jamaica in the 1990s was the achievement of goals of access, equity and quality through the implementation of a common curriculum in all schools. Within this reform, Resource and Technology (R&T) was an innovation designed to develop the creative potential in technology and to transform pedagogical practices from being teacher-centred to being student-centred. This paper examines how teachers and principals involved in the implementation of R&T perceive its attributes, such as need and relevance and observability. The findings reveal how the achievement of goals was frustrated and which challenges the users faced, including a lack of clarity of the means for implementing R&T.

Space Exploration Technologies Developed through Existing and New Research Partnerships Initiatives

NASA Technical Reports Server (NTRS)

Nall, Mark; Casas, Joseph

2004-01-01

The Space Partnership Development Program of NASA has been highly successful in leveraging commercial research investments to the strategic mission and applied research goals of the Agency through industry academic partnerships. This program is currently undergoing an outward-looking transformation towards Agency wide research and discovery goals that leverage partnership contributions to the strategic research needed to demonstrate enabling space exploration technologies encompassing both robotic spacecraft missions and human space flight. New Space Partnership Initiatives with incremental goals and milestones will allow a continuing series of accomplishments to be achieved throughout the duration of each initiative, permit the "lessons learned" and capabilities acquired from previous implementation steps to be incorporated into subsequent phases of the initiatives, and allow adjustments to be made to the implementation of the initiatives as new opportunities or challenges arise. An Agency technological risk reduction roadmap for any required technologies not currently available will identify the initiative focus areas for the development, demonstration and utilization of space resources supporting the production of power, air, and water, structures and shielding materials. This paper examines the successes to date, lessons learned, and programmatic outlook of enabling sustainable exploration and discovery through governmental, industrial, academic, and international partnerships. Previous government and industry technology development programs have demonstrated that a focused research program that appropriately shares the developmental risk can rapidly mature low Technology Readiness Level (TRL) technologies to the demonstration level. This cost effective and timely, reduced time to discovery, partnership approach to the development of needed technological capabilities addresses the dual use requirements by the investing partners. In addition, these partnerships help to ensure the attainment of complimenting human and robotic exploration goals for NASA while providing additional capabilities for sustainable scientific research benefiting life and security on Earth.

Health Information Technology (HIT) Adaptation: Refocusing on the Journey to Successful HIT Implementation.

PubMed

Yen, Po-Yin; McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Huerta, Timothy R

2017-09-07

In past years, policies and regulations required hospitals to implement advanced capabilities of certified electronic health records (EHRs) in order to receive financial incentives. This has led to accelerated implementation of health information technologies (HIT) in health care settings. However, measures commonly used to evaluate the success of HIT implementation, such as HIT adoption, technology acceptance, and clinical quality, fail to account for complex sociotechnical variability across contexts and the different trajectories within organizations because of different implementation plans and timelines. We propose a new focus, HIT adaptation, to illuminate factors that facilitate or hinder the connection between use of the EHR and improved quality of care as well as to explore the trajectory of changes in the HIT implementation journey as it is impacted by frequent system upgrades and optimizations. Future research should develop instruments to evaluate the progress of HIT adaptation in both its longitudinal design and its focus on adaptation progress rather than on one cross-sectional outcome, allowing for more generalizability and knowledge transfer. ©Po-Yin Yen, Ann Scheck McAlearney, Cynthia J Sieck, Jennifer L Hefner, Timothy R Huerta. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 07.09.2017.

Health Monitoring System Technology Assessments: Cost Benefits Analysis

NASA Technical Reports Server (NTRS)

Kent, Renee M.; Murphy, Dennis A.

2000-01-01

The subject of sensor-based structural health monitoring is very diverse and encompasses a wide range of activities including initiatives and innovations involving the development of advanced sensor, signal processing, data analysis, and actuation and control technologies. In addition, it embraces the consideration of the availability of low-cost, high-quality contributing technologies, computational utilities, and hardware and software resources that enable the operational realization of robust health monitoring technologies. This report presents a detailed analysis of the cost benefit and other logistics and operational considerations associated with the implementation and utilization of sensor-based technologies for use in aerospace structure health monitoring. The scope of this volume is to assess the economic impact, from an end-user perspective, implementation health monitoring technologies on three structures. It specifically focuses on evaluating the impact on maintaining and supporting these structures with and without health monitoring capability.

Design and implementation of a Windows NT network to support CNC activities

NASA Technical Reports Server (NTRS)

Shearrow, C. A.

1996-01-01

The Manufacturing, Materials, & Processes Technology Division is undergoing dramatic changes to bring it's manufacturing practices current with today's technological revolution. The Division is developing Computer Automated Design and Computer Automated Manufacturing (CAD/CAM) abilities. The development of resource tracking is underway in the form of an accounting software package called Infisy. These two efforts will bring the division into the 1980's in relationship to manufacturing processes. Computer Integrated Manufacturing (CIM) is the final phase of change to be implemented. This document is a qualitative study and application of a CIM application capable of finishing the changes necessary to bring the manufacturing practices into the 1990's. The documentation provided in this qualitative research effort includes discovery of the current status of manufacturing in the Manufacturing, Materials, & Processes Technology Division including the software, hardware, network and mode of operation. The proposed direction of research included a network design, computers to be used, software to be used, machine to computer connections, estimate a timeline for implementation, and a cost estimate. Recommendation for the division's improvement include action to be taken, software to utilize, and computer configurations.

The deep space network, volume 8

NASA Technical Reports Server (NTRS)

1972-01-01

Progress is reported on DSN supporting research and technology, advanced development and engineering, implementation, and operations which pertain to mission-independent or multiple-mission development as well as to support of flight projects.

Economic challenges associated with tuberculosis diagnostic development

PubMed Central

Hanrahan, Colleen F.; Shah, Maunank

2015-01-01

Tuberculosis remains a global health crisis in part due to underdiagnosis. Technological innovations are needed to improve diagnostic test accuracy and reduce the reliance on expensive laboratory infrastructure. However, there are significant economic challenges impeding the development and implementation of new diagnostics. The aim of this piece is to examine the current state of TB diagnostics, outline the unmet needs for new tests, and detail the economic challenges associated with development of new tests from the perspective of developers, policy makers and implementers. PMID:24766367

Economic challenges associated with tuberculosis diagnostic development.

PubMed

Hanrahan, Colleen F; Shah, Maunank

2014-08-01

Tuberculosis remains a global health crisis in part due to underdiagnosis. Technological innovations are needed to improve diagnostic test accuracy and reduce the reliance on expensive laboratory infrastructure. However, there are significant economic challenges impeding the development and implementation of new diagnostics. The aim of this piece is to examine the current state of TB diagnostics, outline the unmet needs for new tests, and detail the economic challenges associated with development of new tests from the perspective of developers, policy makers and implementers.

Starting with Teachers: Bringing GIS technology to the secondary classroom

NASA Astrophysics Data System (ADS)

Claesgens, J.; Rubino-Hare, L.; Sample, J. C.; Fredrickson, K.; Manone, M.

2010-12-01

An aim of the NSF-ITEST funded POD project is to examine the effect that technology-integrated, problem-based learning modules have on the learning of secondary students whose teachers have participated in a curriculum implementation professional development structure. This research focuses on the professional development structure as the first step to achieving changes in student learning. The assumption is that the teachers themselves have to learn the technology before they can successfully implement it into their classrooms. Teachers attended a 2-week professional development workshop that presented pedagogy, content and GIS training. Our premise for the workshop was that modeling and practicing research-based pedagogical practice will improve participant science instruction through an immersion program focusing on real life problems. The second premise is that improving teacher technology skills and pedagogical knowledge and practice will improve student achievement in science. Professional development is necessary to help teachers learn not only how to use new technology but also how to provide meaningful instruction and activities using technology in the classroom. Therefore if our goal is to immerse the teachers in learning as the students, we need to measure if they indeed did learn. To evaluate if the teacher learned the material just as a student might, we administered a pre- and post-test to 23 teachers attending the workshops. There were 2 forms of the test, a multiple-choice test that focused on content questions in earth science, interpretation of GIS screen shots and spatial reasoning skills. The second component, the Geospatial Technology Performance Assessment, focused on the teachers’ abilities to use the GIS technology to gather data, sort and communicate information using maps, tables and keys. For the latter a grounded-theory approach was used to group teachers answers based on the responses provided. Teacher responses fell into 5 groups, scored 0-4. These scores were cumulative, meaning that for someone to earn a 3 they needed to be able to show proficiency at a 1 and 2 level. Results of the pre and posttests are in the table below. The ultimate goal of this project is to improve student understanding. At this point we have data that our teachers did develop an understanding of GIS from the professional development workshop that we hope to see implemented into the classroom.Results of pre and posttests *The scoring rubric will be presented at the conference.

Information Technology in a Developing Country: An Exploration of the Factors Associated with Attitudes of Decision Makers in Jordanian Government Institutions toward the Utilization of Computer-Based Technology

ERIC Educational Resources Information Center

Khasawneh, Saleh

2010-01-01

In this era of rapidly advancing technologies, many governments around the globe are spending a great amount of money on these technologies, in order to increase their work performance. Therefore, the Jordanian government decided to implement IT in its public organizations. However, the picture is unclear about users' attitudes toward this…

A computational future for preventing HIV in minority communities: how advanced technology can improve implementation of effective programs.

PubMed

Brown, C Hendricks; Mohr, David C; Gallo, Carlos G; Mader, Christopher; Palinkas, Lawrence; Wingood, Gina; Prado, Guillermo; Kellam, Sheppard G; Pantin, Hilda; Poduska, Jeanne; Gibbons, Robert; McManus, John; Ogihara, Mitsunori; Valente, Thomas; Wulczyn, Fred; Czaja, Sara; Sutcliffe, Geoff; Villamar, Juan; Jacobs, Christopher

2013-06-01

African Americans and Hispanics in the United States have much higher rates of HIV than non-minorities. There is now strong evidence that a range of behavioral interventions are efficacious in reducing sexual risk behavior in these populations. Although a handful of these programs are just beginning to be disseminated widely, we still have not implemented effective programs to a level that would reduce the population incidence of HIV for minorities. We proposed that innovative approaches involving computational technologies be explored for their use in both developing new interventions and in supporting wide-scale implementation of effective behavioral interventions. Mobile technologies have a place in both of these activities. First, mobile technologies can be used in sensing contexts and interacting to the unique preferences and needs of individuals at times where intervention to reduce risk would be most impactful. Second, mobile technologies can be used to improve the delivery of interventions by facilitators and their agencies. Systems science methods including social network analysis, agent-based models, computational linguistics, intelligent data analysis, and systems and software engineering all have strategic roles that can bring about advances in HIV prevention in minority communities. Using an existing mobile technology for depression and 3 effective HIV prevention programs, we illustrated how 8 areas in the intervention/implementation process can use innovative computational approaches to advance intervention adoption, fidelity, and sustainability.

A New Approach to Geoengineering: Manna From Heaven

NASA Astrophysics Data System (ADS)

Ellery, Alex

2015-04-01

Geo-engineering, although controversial, has become an emerging factor in coping with climate change. Although most are terrestrial-based technologies, I focus on a space-based approach implemented through a solar shield system. I present several new elements that essentially render the high-cost criticism moot. Of special relevance are two seemingly unrelated technologies - the Resource Prospector Mission (RPM) to the Moon in 2018 that shall implement a technology demonstration of simple material resource extraction from lunar regolith, and the emergence of multi-material 3D printing technology that promises unprecedented robotic manufacturing capabilities. My research group has begun theoretical and experimentation work in developing the concept of a 3D printed electric motor system from lunar-type resources. The electric motor underlies every universal mechanical machine. Together with 3D printed electronics, I submit that this would enable self-replicating machines to be realised. A detailed exposition on how this may be achieved will be outlined. Such self-replicating machines could construct the spacecraft required to implement a solar shield and solar power satellites in large numbers from lunar resources with the same underlying technologies at extremely low cost.

Electronic commerce: beyond the euphoria.

PubMed

Healy, J L; DeLuca, J M

2000-01-01

As the center of considerable media attention, case study articles, vendor research, and development efforts, electronic commerce technology is entering healthcare and having a profound effect. The simple truth, however, is that after the drama and excitement begins to wear off, completing a successful e-commerce implementation remains good old-fashioned hard, sometimes monotonous work. To be successful, e-commerce technologies must be planned and implemented with rigorous project standards, and incorporated with significant process and workflow reengineering to actually return significant value to the organization. This article briefs readers on the organizational issues they must consider in evaluating e-commerce readiness--cultural, executive and technological factors that either support or inhibit project and technology success. Readers will be left with the tools to conduct an electronic commerce "readiness assessment" to evaluate the immediate, mid- and long-term potential of electronic commerce; practical remediation strategies for better preparing the organization for the changes inherent in moving to an e-commerce-enabled business model; and comments from the field--advice from organizations that have successfully implemented e-commerce technologies into their ongoing operations.

New Directions for NASA's Advanced Life Support Program

NASA Technical Reports Server (NTRS)

Barta, Daniel J.

2006-01-01

Advanced Life Support (ALS), an element of Human Systems Research and Technology s (HSRT) Life Support and Habitation Program (LSH), has been NASA s primary sponsor of life support research and technology development for the agency. Over its history, ALS sponsored tasks across a diverse set of institutions, including field centers, colleges and universities, industry, and governmental laboratories, resulting in numerous publications and scientific articles, patents and new technologies, as well as education and training for primary, secondary and graduate students, including minority serving institutions. Prior to the Vision for Space Exploration (VSE) announced on January 14th, 2004 by the President, ALS had been focused on research and technology development for long duration exploration missions, emphasizing closed-loop regenerative systems, including both biological and physicochemical. Taking a robust and flexible approach, ALS focused on capabilities to enable visits to multiple potential destinations beyond low Earth orbit. ALS developed requirements, reference missions, and assumptions upon which to structure and focus its development program. The VSE gave NASA a plan for steady human and robotic space exploration based on specific, achievable goals. Recently, the Exploration Systems Architecture Study (ESAS) was chartered by NASA s Administrator to determine the best exploration architecture and strategy to implement the Vision. The study identified key technologies required to enable and significantly enhance the reference exploration missions and to prioritize near-term and far-term technology investments. This technology assessment resulted in a revised Exploration Systems Mission Directorate (ESMD) technology investment plan. A set of new technology development projects were initiated as part of the plan s implementation, replacing tasks previously initiated under HSRT and its sister program, Exploration Systems Research and Technology (ESRT). The Exploration Life Support (ELS) Project, under the Exploration Technology Development Program, has recently been initiated to perform directed life support technology development in support of Constellation and the Crew Exploration Vehicle (CEV). ELS) has replaced ALS, with several major differences. Thermal Control Systems have been separated into a new stand alone project (Thermal Systems for Exploration Missions). Tasks in Advanced Food Technology have been relocated to the Human Research Program. Tasks in a new discipline area, Habitation Engineering, have been added. Research and technology development for capabilities required for longer duration stays on the Moon and Mars, including bioregenerative system, have been deferred.

EVALUATION OF PNEUMATIC FRACTURING FOR REMEDIATION OF ROCK MASSES

EPA Science Inventory

EPA established the SITE Program in 1986 to promote the development and use of innovative technologies to clean up Sueprfund sites across the country. Now in its fourteenth year, the SITE program is helping provide the treatment technologies necessary to implement new Federal and...

Elementary School Technology Education. 46th Yearbook, 1997.

ERIC Educational Resources Information Center

Kirkwood, James J., Ed.; Foster, Patrick N., Ed.

This yearbook explores the relationship between elementary school technology education (ESTE) and the traditional subjects of the curriculum, reports on methods of ESTE implementation, and describes roles of teacher preparation and inservice professional development activities for promoting ESTE. Contents include an introductory chapter; 11…

The telecommunications and data acquisition report

NASA Technical Reports Server (NTRS)

Renzetti, N. A.

1980-01-01

Deep Space Network progress in flight project support, tracking and data acquisition research and technology, network engineering, hardware and software implemention, and operations is documented. In addition, developments in Earth based radio technology as applied to geodynamics, astrophysics, and the radio search for extraterrestrial intelligence are reported.

Using Live Dual Modeling to Help Preservice Teachers Develop TPACK

ERIC Educational Resources Information Center

Lu, Liangyue; Lei, Jing

2012-01-01

To help preservice teachers learn about teaching with technology--specifically, technological pedagogical content knowledge (TPACK)--the researchers designed and implemented a Live Dual Modeling strategy involving both live behavior modeling and cognitive modeling in this study. Using qualitative research methods, the researchers investigated…

The Telecommunications and Data Acquisition Report

NASA Technical Reports Server (NTRS)

Posner, E. C. (Editor)

1986-01-01

Deep Space Network progress in flight project support, tracking and data acquisition research and technology, network engineering, hardware and software implementation, and operations is documented. In addition, developments in Earth-based radio technology as applied to geodynamics, astrophysics and the radio search for extraterrestrial intelligence are reported.

Comparison of Fiber Optic Strain Demodulation Implementations

NASA Technical Reports Server (NTRS)

Quach, Cuong C.; Vazquez, Sixto L.

2005-01-01

NASA Langley Research Center is developing instrumentation based upon principles of Optical Frequency-Domain Reflectometry (OFDR) for the provision of large-scale, dense distribution of strain sensors using fiber optics embedded with Bragg gratings. Fiber Optic Bragg Grating technology enables the distribution of thousands of sensors immune to moisture and electromagnetic interference with negligible weight penalty. At Langley, this technology provides a key component for research and development relevant to comprehensive aerospace vehicle structural health monitoring. A prototype system is under development that includes hardware and software necessary for the acquisition of data from an optical network and conversion of the data into strain measurements. This report documents the steps taken to verify the software that implements the algorithm for calculating the fiber strain. Brief descriptions of the strain measurement system and the test article are given. The scope of this report is the verification of software implementations as compared to a reference model. The algorithm will be detailed along with comparison results.

Transforming a Traditional Inquiry-Based Science Unit into a STEM Unit for Elementary Pre-service Teachers: A View from the Trenches

NASA Astrophysics Data System (ADS)

Schmidt, Matthew; Fulton, Lori

2016-04-01

The need to prepare students with twenty-first-century skills through STEM-related teaching is strong, especially at the elementary level. However, most teacher education preparation programs do not focus on STEM education. In an attempt to provide an exemplary model of a STEM unit, we used a rapid prototyping approach to transform an inquiry-based unit on moon phases into one that integrated technology in a meaningful manner to develop technological literacy and scientific concepts for pre-service teachers (PSTs). Using qualitative case study methodology, we describe lessons learned related to the development and implementation of a STEM unit in an undergraduate elementary methods course, focusing on the impact the inquiry model had on PSTs' perceptions of inquiry-based science instruction and how the integration of technology impacted their learning experience. Using field notes and survey data, we uncovered three overarching themes. First, we found that PSTs held absolutist beliefs and had a need for instruction on inquiry-based learning and teaching. Second, we determined that explicit examples of effective and ineffective technology use are needed to help PSTs develop an understanding of meaningful technology integration. Finally, the rapid prototyping approach resulted in a successful modification of the unit, but caused the usability of our digital instructional materials to suffer. Our findings suggest that while inquiry-based STEM units can be implemented in existing programs, creating and testing these prototypes requires significant effort to meet PSTs' learning needs, and that iterating designs is essential to successful implementation.

Improving the Effectiveness of Electronic Health Record-Based Referral Processes

PubMed Central

2012-01-01

Electronic health records are increasingly being used to facilitate referral communication in the outpatient setting. However, despite support by technology, referral communication between primary care providers and specialists is often unsatisfactory and is unable to eliminate care delays. This may be in part due to lack of attention to how information and communication technology fits within the social environment of health care. Making electronic referral communication effective requires a multifaceted “socio-technical” approach. Using an 8-dimensional socio-technical model for health information technology as a framework, we describe ten recommendations that represent good clinical practices to design, develop, implement, improve, and monitor electronic referral communication in the outpatient setting. These recommendations were developed on the basis of our previous work, current literature, sound clinical practice, and a systems-based approach to understanding and implementing health information technology solutions. Recommendations are relevant to system designers, practicing clinicians, and other stakeholders considering use of electronic health records to support referral communication. PMID:22973874

Alternative technological development for RF hybridization

NASA Astrophysics Data System (ADS)

Antônio Finardi, Célio; da Fontoura Ponchet, André; Battesini Adamo, Cristina; Flacker, Alexander; Cotrin Teixeira, Ricardo; Panepucci, Roberto Ricardo

2017-03-01

The paper presents a technological solution for high frequency packaging platform evaluated up to 40 GHz. The main purpose of this development was to define an alternative hybrid technology that is more flexible and faster to prototype compared with thin film or multi chip module (MCM-D). The alternative technology also shows adequate performance for high bit rate solutions integrating optical and electronics blocks. This approach consists of a soft substrate (laminate material), plating processes (electroless Ni-P/Au, electrolytic Au) and lithography patterning. Ground coplanar waveguide was used for microwave structures with excellent ground planes connections due to easy via holes implementation. We present results of high frequency packaging of important RF blocks, such as integrated broadband bias-T, transimpedance amplifier ICs and silicon photonics optical modulators. The paper demonstrates a solution for high frequency hybridization that can be implemented with standard substrates, designed with any shape and with large numbers of metalized via holes and compatible with usual assembling techniques.

Original Courseware for Introductory Psychology: Implementation and Evaluation.

ERIC Educational Resources Information Center

Slotnick, Robert S.

1988-01-01

Describes the implementation and field testing of PsychWare, a courseware package for introductory psychology developed and field tested at New York Institute of Technology. Highlights include the courseware package (10 software programs, a faculty manual, and a student workbook), and instructional design features (simulations, real-time…

Implementing the Biological Condition Gradient Framework for Management of Estuaries and Coasts

EPA Science Inventory

The Biological Condition Gradient (BCG) is an scientific approach to consistent bioassessment that was developed by the U.S. EPA’s Office of Water (Office of Science and Technology) and partners. This report describes implementation of the BCG framework for estuaries and coasts ...

Local Heroes: Bringing Telecommunications to Rural, Small Schools.

ERIC Educational Resources Information Center

Sullivan, Michael; And Others

This book provides information supplemental to the accompanying videotape regarding the implementation and use of two-way, full-motion interactive television. Based on a study conducted by the Southwest Educational Development Laboratory, "Local Heroes" describes in detail how citizens have implemented the technology in small rural…

[Telepsychiatry provides new opportunities for the prevention and treatment of mental health disorders].

PubMed

Folker, Marie Paldam; Helverskov, Trine; Nielsen, Amalie Søgaard; Jørgensen, Ulla Skov; Larsen, John Teilmann

2018-04-23

Digital technologies in mental healthcare are envisioned to offer easier, faster and more cost-effective access to mental healthcare. The scope for integrating digital technology into mental healthcare is vast: video conferencing, developing novel treatments using interactive software, mobile applications, and sensor technologies. We outline technology-based interventions, which are relevant to clinical practice, and present the evidence base for using digital technology as well as emerging challenges for their implementation in clinical practice.

An intervention fidelity framework for technology-based behavioral interventions.

PubMed

Devito Dabbs, Annette; Song, Mi-Kyung; Hawkins, Robert; Aubrecht, Jill; Kovach, Karen; Terhorst, Lauren; Connolly, Mary; McNulty, Mary; Callan, Judith

2011-01-01

Despite the proliferation of health technologies, descriptions of the unique considerations and practical guidance for evaluating the intervention fidelity of technology-based behavioral interventions are lacking. The aims of this study were to (a) discuss how technology-based behavioral interventions challenge conventions about how intervention fidelity is conceptualized and evaluated, (b) propose an intervention fidelity framework that may be more appropriate for technology-based behavioral interventions, and (c) present a plan for operationalizing each concept in the framework using the intervention fidelity monitoring plan for Pocket PATH (Personal Assistant for Tracking Health), a mobile health technology designed to promote self-care behaviors after lung transplantation, as an exemplar. The literature related to intervention fidelity and technology acceptance was used to identify the issues that are unique to the fidelity of technology-based behavioral interventions and thus important to include in a proposed intervention fidelity framework. An intervention fidelity monitoring plan for technology-based behavioral interventions was developed as an example. The intervention fidelity monitoring plan was deemed feasible and practical to implement and showed utility in operationalizing the concepts such as assessing interventionists' delivery and participants' acceptance of the technology-based behavioral intervention. The framework has the potential to guide the development of implementation fidelity monitoring tools for other technology-based behavioral interventions. Further application and testing of this framework will allow for a better understanding of the role that technology acceptance plays in the adoption and enactment of the behaviors that technology-based behavioral interventions are intended to promote.

76 FR 78009 - Information Collection; Implementation of Information Technology Security Provision

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-15

...] Information Collection; Implementation of Information Technology Security Provision AGENCY: General Services... collection requirement regarding Implementation of Information Technology Security Provision. Public comments... Information Collection 3090- 0294, Implementation of Information Technology Security Provision, by any of the...

A cautionary approach in transitioning to 'green' energy technologies and practices is required.

PubMed

Matatiele, Puleng; Gulumian, Mary

2016-06-01

Renewable energy technologies (wind turbines, solar cells, biofuels, etc.) are often referred to as 'clean' or 'green' energy sources, while jobs linked to the field of environmental protection and energy efficiency are referred to as 'green' jobs. The energy efficiency of clean technologies, which is likely to reduce and/or eliminate reliance on fossil fuels, is acknowledged. However, the potential contribution of green technologies and associated practices to ill health and environmental pollution resulting from consumption of energy and raw materials, generation of waste, and the negative impacts related to some life cycle phases of these technologies are discussed. Similarly, a point is made that the green jobs theme is mistakenly oversold because the employment opportunities generated by transitioning to green technologies are not necessarily safe and healthy jobs. Emphasis is put on identifying the hazards associated with these green designs, assessing the risks to the environment and worker health and safety, and either eliminating the hazards or minimizing the risks as essential elements to the design, construction, operation, and maintenance of green technologies. The perception that it is not always economically possible to consider all risk factors associated with renewable energy technologies at the beginning without hampering their implementation, especially in the poor developing countries, is dismissed. Instead, poor countries are encouraged to start implementing environmentally sound practices while transitioning to green technologies in line with their technological development and overall economic growth.

Implementation Plan for Qualification of Sodium-Cooled Fast Reactor Technology Information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moe, Wayne; Honma, George

This document identifies and discusses implementation elements that can be used to facilitate consistent and systematic evaluation processes relating to quality attributes of technical information (with focus on SFR technology) that will be used to support licensing of advanced reactor designs. Information may include, but is not limited to, design documents for SFRs, research-and-development (R&D) data and associated documents, test plans and associated protocols, operations and test data, international research data, technical reports, and information associated with past U.S. Nuclear Regulatory Commission (NRC) reviews of SFR designs. The approach for determining acceptability of test data, analysis, and/or other technical informationmore » is based on guidance provided in INL/EXT-15-35805, “Guidance on Evaluating Historic Technology Information for Use in Advanced Reactor Licensing.” The implementation plan can be adopted into a working procedure at each of the national laboratories performing data qualification, or by applicants seeking future license application for advanced reactor technology.« less

What does voice-processing technology support today?

PubMed Central

Nakatsu, R; Suzuki, Y

1995-01-01

This paper describes the state of the art in applications of voice-processing technologies. In the first part, technologies concerning the implementation of speech recognition and synthesis algorithms are described. Hardware technologies such as microprocessors and DSPs (digital signal processors) are discussed. Software development environment, which is a key technology in developing applications software, ranging from DSP software to support software also is described. In the second part, the state of the art of algorithms from the standpoint of applications is discussed. Several issues concerning evaluation of speech recognition/synthesis algorithms are covered, as well as issues concerning the robustness of algorithms in adverse conditions. Images Fig. 3 PMID:7479720

Workshop Proceedings: Optical Systems Technology for Space Astrophysics in the 21st Century, volume 3

NASA Technical Reports Server (NTRS)

Ayon, Juan A. (Editor)

1992-01-01

A technology development program, Astrotech 21, is being proposed by NASA to enable the launching of the next generation of space astrophysical observatories during the years 1995-2015. Astrotech 21 is being planned and will ultimately be implemented jointly by the Astrophysics Division of the Office of Space Science and Applications and the Space Directorate of the Office of Aeronautics and Space Technology. A summary of the Astrotech 21 Optical Systems Technology Workshop is presented. The goal of the workshop was to identify areas of development within advanced optical systems that require technology advances in order to meet the science goals of the Astrotech 21 mission set, and to recommend a coherent development program to achieve the required capabilities.

Space Station Technology, 1983

NASA Technical Reports Server (NTRS)

Wright, R. L. (Editor); Mays, C. R. (Editor)

1984-01-01

This publication is a compilation of the panel summaries presented in the following areas: systems/operations technology; crew and life support; EVA; crew and life support: ECLSS; attitude, control, and stabilization; human capabilities; auxillary propulsion; fluid management; communications; structures and mechanisms; data management; power; and thermal control. The objective of the workshop was to aid the Space Station Technology Steering Committee in defining and implementing a technology development program to support the establishment of a permanent human presence in space. This compilation will provide the participants and their organizations with the information presented at this workshop in a referenceable format. This information will establish a stepping stone for users of space station technology to develop new technology and plan future tasks.

Acquisition of specialized testing equipment for advanced cement-based materials.

DOT National Transportation Integrated Search

2014-07-01

This equipment purchase will enabled the development, manufacturing, and implementation of advanced and sustainable materials for transportation infrastructure, with emphasis on concrete. The developments of green technologies that can lead to ...

Physics of the Cosmos (PCOS) Technology Development Program Overview

NASA Astrophysics Data System (ADS)

Pham, B. Thai; Clampin, M.; Werneth, R. L.

2014-01-01

The Physics of the Cosmos (PCOS) Program Office was established in FY11 and resides at the NASA Goddard Space Flight Center (GSFC). The office serves as the implementation arm for the Astrophysics Division at NASA Headquarters for PCOS Program related matters. We present an overview of the Program’s technology management activities and the Program’s technology development portfolio. We discuss the process for addressing community-provided technology needs and the Technology Management Board (TMB)-vetted prioritization and investment recommendations. This process improves the transparency and relevance of technology investments, provides the community a voice in the process, and leverages the technology investments of external organizations by defining a need and a customer. Goals for the PCOS Program envisioned by the National Research Council’s (NRC) “New Worlds, New Horizons in Astronomy and Astrophysics” (NWNH) Decadal Survey report include science missions and technology development for dark energy, gravitational waves, X-ray, and inflation probe science.

Designing a concentrating photovoltaic (CPV) system in adjunct with a silicon photovoltaic panel for a solar competition car

NASA Astrophysics Data System (ADS)

Arias-Rosales, Andrés.; Barrera-Velásquez, Jorge; Osorio-Gómez, Gilberto; Mejía-Gutiérrez, Ricardo

2014-06-01

Solar competition cars are a very interesting research laboratory for the development of new technologies heading to their further implementation in either commercial passenger vehicles or related applications. Besides, worldwide competitions allow the spreading of such ideas where the best and experienced teams bet on innovation and leading edge technologies, in order to develop more efficient vehicles. In these vehicles, some aspects generally make the difference such as aerodynamics, shape, weight, wheels and the main solar panels. Therefore, seeking to innovate in a competitive advantage, the first Colombian solar vehicle "Primavera", competitor at the World Solar Challenge (WSC)-2013, has implemented the usage of a Concentrating Photovoltaic (CPV) system as a complementary solar energy module to the common silicon photovoltaic panel. By harvesting sunlight with concentrating optical devices, CPVs are capable of maximizing the allowable photovoltaic area. However, the entire CPV system weight must be less harmful than the benefit of the extra electric energy generated, which in adjunct with added manufacture and design complexity, has intervened in the fact that CPVs had never been implemented in a solar car in such a scale as the one described in this work. Design considerations, the system development process and implementation are presented in this document considering both the restrictions of the context and the interaction of the CPV system with the solar car setup. The measured data evidences the advantage of using this complementary system during the competition and the potential this technology has for further developments.

Application of Geographical Information Systems and Remote Sensing technologies for assessing and monitoring malaria risk.

PubMed

Ceccato, P; Connor, S J; Jeanne, I; Thomson, M C

2005-03-01

Despite over 30 years of scientific research, algorithm development and multitudes of publications relating Remote Sensing (RS) information with the spatial and temporal distribution of malaria, it is only in recent years that operational products have been adopted by malaria control decision-makers. The time is ripe for the wealth of research knowledge and products from developed countries be made available to the decision-makers in malarious regions of the globe where this information is urgently needed. This paper reviews the capability of RS to provide useful information for operational malaria early warning systems. It also reviews the requirements for monitoring the major components influencing emergence of malaria and provides examples of applications that have been made. Discussion of the issues that have impeded implementation on a global scale and how those barriers are disappearing with recent economic, technological and political developments are explored; and help pave the way for implementation of an integrated Malaria Early Warning System framework using RS technologies.

MRMAide: a mixed resolution modeling aide

NASA Astrophysics Data System (ADS)

Treshansky, Allyn; McGraw, Robert M.

2002-07-01

The Mixed Resolution Modeling Aide (MRMAide) technology is an effort to semi-automate the implementation of Mixed Resolution Modeling (MRM). MRMAide suggests ways of resolving differences in fidelity and resolution across diverse modeling paradigms. The goal of MRMAide is to provide a technology that will allow developers to incorporate model components into scenarios other than those for which they were designed. Currently, MRM is implemented by hand. This is a tedious, error-prone, and non-portable process. MRMAide, in contrast, will automatically suggest to a developer where and how to connect different components and/or simulations. MRMAide has three phases of operation: pre-processing, data abstraction, and validation. During pre-processing the components to be linked together are evaluated in order to identify appropriate mapping points. During data abstraction those mapping points are linked via data abstraction algorithms. During validation developers receive feedback regarding their newly created models relative to existing baselined models. The current work presents an overview of the various problems encountered during MRM and the various technologies utilized by MRMAide to overcome those problems.

Technology development and innovation for the bottom of the economic pyramid

NASA Astrophysics Data System (ADS)

Gadgil, Ashok

2015-04-01

Directed development of new technologies to solve specific problems of the poor in the developing world is a daunting task. Developing countries can be a wasteland littered with failed technologies sent there with much goodwill and effort from the industrial countries. Drawing on my team's experience I summarize our answers to some key questions for the technology designer or developer: How might one go about it? What works and what doesn't? What lessons can one draw from an examination of select successes and failures? The key lessons from our experience are: (1) successful technology design and implementation can not be separated from each other - they are tightly intertwined, (2) social factors are as critical for a technology's success as factors based on engineering science, and (3) ignorance of political economy, behavioral economics, organizational behavior, institutional imperatives, cultural norms and social drivers can prove fatal flaws when a new technology leaves the laboratory and meets the real world.

Transforming Tech Ed: The Advanced Technological Education Community Leads in Developing and Implementing Teaching Strategies

ERIC Educational Resources Information Center

Patton, Madeline

2015-01-01

After years of working in the background to build the capacity of two-year college science, technology, engineering and math (STEM) faculty and the skills of technicians, the Advanced Technological Education (ATE) program is gaining recognition as a source of STEM workforce expertise. The ATE program's effective mentoring of STEM educators and its…

Low Power Camera-on-a-Chip Using CMOS Active Pixel Sensor Technology

NASA Technical Reports Server (NTRS)

Fossum, E. R.

1995-01-01

A second generation image sensor technology has been developed at the NASA Jet Propulsion Laboratory as a result of the continuing need to miniaturize space science imaging instruments. Implemented using standard CMOS, the active pixel sensor (APS) technology permits the integration of the detector array with on-chip timing, control and signal chain electronics, including analog-to-digital conversion.

A Study of Technological and Vocational Education in the Republic of China: Some Concepts and Their Implementation.

ERIC Educational Resources Information Center

Chang, Frank Tien-Jin

During the past 100 years, technological development in the Republic of China has not been able to catch up with that of western industrialized countries. An important reason is that early Chinese society despised technology and failed to include technical education in orthodox, mainstream education. The concept that one's advancement is in…

Formation of the Integral Ecological Quality Index of the Technological Processes in Machine Building Based on Their Energy Efficiency

ERIC Educational Resources Information Center

Egorov, Sergey B.; Kapitanov, Alexey V.; Mitrofanov, Vladimir G.; Shvartsburg, Leonid E.; Ivanova, Natalia A.; Ryabov, Sergey A.

2016-01-01

The aim of article is to provide development of a unified assessment methodology in relation to various technological processes and the actual conditions of their implementation. To carry the energy efficiency analysis of the technological processes through comparison of the established power and the power consumed by the actual technological…

AIPS technology survey report

NASA Technical Reports Server (NTRS)

Ogletree, Glenn (Editor)

1984-01-01

The results of a technology survey conducted for the NASA/JSC by the CSDL during Phase 1 of the NASA Advanced Information Processing System (AIPS) program at the CSDL are discussed. The purpose of the survey was to ensure that all technology relevant to the configuration, design, development, verification, implementation, and validation of an advanced information processing system, whether existing or under development and soon to be available, would be duly considered in the development of the AIPS. The emphasis in the survey was on technology items which were clearly relevant to the AIPS. Requirements were developed which guided the planning of contacts with the outside sources to be surveyed, and established practical limits on the scope and content of the Technology Survey. Subjects surveyed included architecture, software, hardware, methods for evaluation of reliability and performance, and methods for the verification of the AIPS design and the validation of the AIPS implementation. Survey requirements and survey results in each of these areas are presented, including analyses of the potential effects on the AIPS development process of using or not using the surveyed technology items. Another output of the survey was the identification of technology areas of particular relevance to the AIPS and for which further development, in some cases by the CSDL and in some cases by the NASA, would be fruitful. Appendices are provided in which are presented: (1) reports of some of the actual survey interactions with industrial and other outside information sources; (2) the literature list from the comprehensive literature survey which was conducted; (3) reduced-scale images of an excerpt ('Technology Survey' viewgraphs) from the set of viewgraphs used at the 14 April 1983 Preliminary Requirements Review by the CSDL for the NASA; and (4) reduced-scale images of the set of viewgraphs used in the AIPS Technology Survey Review presentation to the NASA monitors by the CSDL at the NASA Langley Research Center on 28 Sep. 1983.

Beginning to manage drug discovery and development knowledge.

PubMed

Sumner-Smith, M

2001-05-01

Knowledge management approaches and technologies are beginning to be implemented by the pharmaceutical industry in support of new drug discovery and development processes aimed at greater efficiencies and effectiveness. This trend coincides with moves to reduce paper, coordinate larger teams with more diverse skills that are distributed around the globe, and to comply with regulatory requirements for electronic submissions and the associated maintenance of electronic records. Concurrently, the available technologies have implemented web-based architectures with a greater range of collaborative tools and personalization through portal approaches. However, successful application of knowledge management methods depends on effective cultural change management, as well as proper architectural design to match the organizational and work processes within a company.

Perspectives on Introduction and Implementation of New Point-of-Care Diagnostic Tests

PubMed Central

Palamountain, Kara M.; Baker, Jeff; Cowan, Elliot P.; Essajee, Shaffiq; Mazzola, Laura T.; Metzler, Mutsumi; Schito, Marco; Stevens, Wendy S.; Young, Gloria J.

2012-01-01

In recent years, there has been significant investment from both the private and public sectors in the development of diagnostic technologies to meet the need for human immunodeficiency virus (HIV) and tuberculosis testing in low-resource settings. Future investments should ensure that the most appropriate technologies are adopted in settings where they will have a sustainable impact. Achieving these aims requires the involvement of many stakeholders, as their needs, operational constraints, and priorities are often distinct. Here, we discuss these considerations from different perspectives representing those of various stakeholders involved in the development, introduction, and implementation of diagnostic tests. We also discuss some opportunities to address these considerations. PMID:22402038

Keeping learning central: a model for implementing emerging technologies

PubMed Central

Willcockson, Irmgard U.; Phelps, Cynthia L.

2010-01-01

Felt problem Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. Our solution We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms. PMID:20165698

Keeping learning central: a model for implementing emerging technologies.

PubMed

Willcockson, Irmgard U; Phelps, Cynthia L

2010-01-15

FELT PROBLEM: Technology integration continues to be a challenge for health science faculty. While students expect emerging technologies to be used in the classroom, faculty members desire a strategic process to incorporate technology for the students' benefit. OUR SOLUTION: We have developed a model that provides faculty a strategy for integrating emerging technologies into the classroom. The model is grounded in student learning and may be applied to any technology. We present the model alongside examples from faculty who have used it to incorporate technology into their health sciences classrooms.

Implementation of eMental Health care: viewpoints from key informants from organizations and agencies with eHealth mandates.

PubMed

Wozney, Lori; Newton, Amanda S; Gehring, Nicole D; Bennett, Kathryn; Huguet, Anna; Hartling, Lisa; Dyson, Michele P; McGrath, Patrick

2017-06-02

The use of technology such as computers, tablets, and smartphones to improve access to and the delivery of mental health care (eMental Health care) is growing worldwide. However, despite the rapidly expanding evidence base demonstrating the efficacy of eMental Health care, its implementation in clinical practice and health care systems remains fragmented. To date, no peer-reviewed, key-informant studies have reported on the perspectives of decision-makers concerned with whether and how to implement eMental Health care. From September to November 2015, we conducted 31 interviews with key informants responsible for leadership, policy, research, and/ or information technology in organizations influential in the adoption of technology for eMental Health care. Deductive and inductive thematic analyses of transcripts were conducted using the Behavior Change Wheel as an organizing framework. Frequency and intensity effect sizes were calculated for emerging themes to further explore patterns within the data. Key informant responses (n = 31) representing 6 developed countries and multiple organizations showed consensus on common factors impacting implementation: individual and organizational capacities (e.g., computer literacy skills [patients and providers], knowledge gaps about cyber security, limited knowledge of available services); motivational drivers of technology-based care (e.g., extending care, data analytics); and opportunities for health systems to advance eMental Health care implementation (e.g., intersectoral research, rapid testing cycles, sustainable funding). Frequency effect sizes showed strong associations between implementation and credibility, knowledge, workflow, patient empowerment, electronic medical record (EMR) integration, sustained funding and intersectoral networks. Intensity effect sizes showed the highest concentration of statements (>10% of all comments) related to funding, credibility, knowledge gaps, and patient empowerment. This study provides previously unavailable information about key informant perspectives on eMental Health care implementation. The themes that emerged, namely the need to intensify intersectoral research, measure/monitor readiness to implement, define cost-utility benchmarks, raise awareness about available technologies, and test assumptions that 'proven' technologies will be easily integrated can inform the design and evaluation of eMental Health care implementation models.

Learning COMCAT (Computer Output Microform Catalog): Library Training Program for Foreign Students at New York Institute of Technology.

ERIC Educational Resources Information Center

Chiang, Ching-hsin

This thesis reports on the designer's plans and experiences in carrying out the design, development, implementation, and evaluation of a project, the purpose of which was to develop a training program that would enable foreign students at the New York Institute of Technology (NYIT) to use the Computer Output Microform Catalog (COMCAT) and to…

Empowering People through Technology. Proceedings of the International Conference of the Association for the Development of Computer-Based Instructional Systems (34th, Norfolk, Virginia, November 8-11, 1992).

ERIC Educational Resources Information Center

Association for the Development of Computer-based Instructional Systems.

These proceedings present 74 selected abstracts and 47 selected formal papers under 14 special interest group headings. Topics addressed by the papers include constructing multimedia; interactive video; computers in secondary school mathematics; access in computer-based instruction; implementing computer-based technology; advisor development;…

Exploring Middle School Teachers' Perceptions and Applications of a Site-Based, Technology-Related Professional Development Program Focused on Interactive Whiteboards and Classroom Response Systems

ERIC Educational Resources Information Center

Desai, Shreya J.

2012-01-01

This qualitative study examined five middle school teachers' perceptions of a site-based, technology-related professional development (TRPD) program focused on the interactive whiteboard (IWB) and the classroom response system (CRS) and the practices implemented in the teachers' classrooms as a result of participation in the TRPD…

Solar and Energy Conserving Food Technologies: A Training Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-17.

ERIC Educational Resources Information Center

Farallones Inst., Occidental, CA.

Based on experience in the field, this training manual was developed to help Peace Corps trainers plan and implement inservice training programs in solar and other energy conserving food technologies for Peace Corps volunteers and community workers. Using a competency-based format, the manual contains 20 sessions (learning modules) that focus on…

Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

Georgia High School/High Tech has been developing a suggested curriculum for use in its programs. The purpose of this instructional material is to provide a basic curriculum format for teachers of High School/High Tech students. The curriculum is designed to implement QCC classroom instruction that encourages career development in technological fields through post-secondary education, paid summer internships, and exposure to experiences in high technology.

Nuclear air cleaning: the need for a change in emphasis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carbaugh, E.H.

1982-11-01

The nuclear industry now has over 35 years of experience in nuclear air cleaning. This experience covers technology development, system design, operations, and maintenance. Much of the past experience has been directed towards technology development with particular emphasis on high efficiency particulate air (HEPA) filters. Implementation of this technology has lagged its development by a number of years. A recent study examines the cause and frequencies of HEPA filter changeouts and failures. These data lead to a conclusion that a shift in emphasis from technology development to the training of personnel and the designing and maintaining of such systems ismore » needed. Some highlights of the data and a discussion of topics which should be addressed in training will be presented.« less

2195 Aluminum-Copper-Lithium Friction Plug Welding Development

NASA Technical Reports Server (NTRS)

Takeshita, Rike P.; Hartley, Paula J.; Baker, Kent S.

1997-01-01

Technology developments and applications of friction plug welding is presented. This friction repair welding technology is being studied for implementation on the Space Transportation System's Super Light Weight External Tank. Single plug repairs will be used on a vast majority of weld defects, however, linear defects of up to several inches can be repaired by overlapping plug welds. Methods and results of tensile, bend, simulated service, surface crack tension and other tests at room and cryogenic temperatures is discussed. Attempts to implement Friction Plug Welding has led to both tool and process changes in an attempt to minimize expansive tooling and lengthy implementation times. Process control equipment and data storage methods intended for large scale production will also be addressed. Benefits include increased strength and toughness, decreased weld repair time, automated and highly reliable process, and a lower probability of having to re-repair defect locations.

Technology policy and sustainability: An empirical study of renewable energy development in India

NASA Astrophysics Data System (ADS)

Iyer, Maithili

In the debate over sustainability and development paradigms, energy assumes a unique position by virtue of its direct link with environmental sustainability and its role as an essential vehicle for development. Agenda 21 recognizes that coupling end-use energy efficiency with renewable sources of energy will help meet a large share of the world's energy needs while reducing the environmental impacts of energy use. Nevertheless, the extent and scope of diffusion of new and renewable energy technologies is contingent upon the capabilities of the countries concerned to realize firstly, a need, and subsequently, the resources for utilizing the technologies. India has one of the largest renewable energy programs (REPs) in the world, however, renewables continue to remain a marginal contributor to the total energy supply. The need to fundamentally change the program design of REPs has been suggested by many critics and experts in view of the implementation problems. However, mainstream thinking maintains that Poor financial conditions in the energy sector, not program design flaws, are at the heart of poor implementation results, leading to the premise that infusion of capital and efforts at market transformation through the involvement of the private sector could solve the problem. This dissertation uses case studies on solar photovoltaics, wind energy, and biogas in India to analyze the implementation of renewable energy technologies. Based on stakeholder interviews, documents, and site visits, this dissertation argues that the problems currently recognized are in reality symptomatic of a combination of three underlying problems: (1) An inadequate understanding of the needs of energy users and the complex interplay of existing policies and technological choices with user needs and behavior; (2) An institutional network, both at the local and the national level, that lacks the capacity to facilitate information exchange within and between institutions, thereby losing the opportunity to transfer valuable knowledge gained from implementing REPs; and (3) A program design that does not include adequate planning for infrastructure and policy support, which undermines the effectiveness of the programs.

The Contextualized Technology Adaptation Process (CTAP): Optimizing Health Information Technology to Improve Mental Health Systems.

PubMed

Lyon, Aaron R; Wasse, Jessica Knaster; Ludwig, Kristy; Zachry, Mark; Bruns, Eric J; Unützer, Jürgen; McCauley, Elizabeth

2016-05-01

Health information technologies have become a central fixture in the mental healthcare landscape, but few frameworks exist to guide their adaptation to novel settings. This paper introduces the contextualized technology adaptation process (CTAP) and presents data collected during Phase 1 of its application to measurement feedback system development in school mental health. The CTAP is built on models of human-centered design and implementation science and incorporates repeated mixed methods assessments to guide the design of technologies to ensure high compatibility with a destination setting. CTAP phases include: (1) Contextual evaluation, (2) Evaluation of the unadapted technology, (3) Trialing and evaluation of the adapted technology, (4) Refinement and larger-scale implementation, and (5) Sustainment through ongoing evaluation and system revision. Qualitative findings from school-based practitioner focus groups are presented, which provided information for CTAP Phase 1, contextual evaluation, surrounding education sector clinicians' workflows, types of technologies currently available, and influences on technology use. Discussion focuses on how findings will inform subsequent CTAP phases, as well as their implications for future technology adaptation across content domains and service sectors.

Strategic Planning for Computer-Based Educational Technology.

ERIC Educational Resources Information Center

Bozeman, William C.

1984-01-01

Offers educational practitioners direction for the development of a master plan for the implementation and application of computer-based educational technology by briefly examining computers in education, discussing organizational change from a theoretical perspective, and presenting an overview of the planning strategy known as the planning and…

A Look at Technologies Vis-a-vis Information Handling Techniques.

ERIC Educational Resources Information Center

Swanson, Rowena W.

The paper examines several ideas for information handling implemented with new technologies that suggest directions for future development. These are grouped under the topic headings: Handling Large Data Banks, Providing Personalized Information Packages, Providing Information Specialist Services, and Expanding Man-Machine Interaction. Guides in…

Changing Needs, Changing Models: Instructional Technology Training at Bronx Community College

ERIC Educational Resources Information Center

Wach, Howard

2007-01-01

In this article Harold Wach describes the gradual evolution of instructional technology faculty development programs at Bronx Community College from "one-shot" two-hour software training sessions toward a comprehensive model that combines intensive summer sessions, academic year implementation, peer mentoring, and accountability. The…

The Telecommunications and Data Acquisition Report

NASA Technical Reports Server (NTRS)

Posner, E. C. (Editor)

1985-01-01

Deep Space Network (DSN) progress in flight project support, tracking and data acquisition research and technology, network engineering, hardware and software implementation, and operation is discussed. In addition, developments in Earth-based radio technology as applied to geodynamics, astrophysics and the radio search for extraterrestrial intelligence are reported.

Airframe technology for aircraft energy efficiency. [economic factors

NASA Technical Reports Server (NTRS)

James, R. L., Jr.; Maddalon, D. V.

1984-01-01

The economic factors that resulted in the implementation of the aircraft energy efficiency program (ACEE) are reviewed and airframe technology elements including content, progress, applications, and future direction are discussed. The program includes the development of laminar flow systems, advanced aerodynamics, active controls, and composite structures.