Measures and Metrics for Feasibility of Proof-of-Concept Studies With Human Immunodeficiency Virus Rapid Point-of-Care Technologies: The Evidence and the Framework.

PubMed

Pant Pai, Nitika; Chiavegatti, Tiago; Vijh, Rohit; Karatzas, Nicolaos; Daher, Jana; Smallwood, Megan; Wong, Tom; Engel, Nora

2017-12-01

Pilot (feasibility) studies form a vast majority of diagnostic studies with point-of-care technologies but often lack use of clear measures/metrics and a consistent framework for reporting and evaluation. To fill this gap, we systematically reviewed data to ( a ) catalog feasibility measures/metrics and ( b ) propose a framework. For the period January 2000 to March 2014, 2 reviewers searched 4 databases (MEDLINE, EMBASE, CINAHL, Scopus), retrieved 1441 citations, and abstracted data from 81 studies. We observed 2 major categories of measures, that is, implementation centered and patient centered, and 4 subcategories of measures, that is, feasibility, acceptability, preference, and patient experience. We defined and delineated metrics and measures for a feasibility framework. We documented impact measures for a comparison. We observed heterogeneity in reporting of metrics as well as misclassification and misuse of metrics within measures. Although we observed poorly defined measures and metrics for feasibility, preference, and patient experience, in contrast, acceptability measure was the best defined. For example, within feasibility, metrics such as consent, completion, new infection, linkage rates, and turnaround times were misclassified and reported. Similarly, patient experience was variously reported as test convenience, comfort, pain, and/or satisfaction. In contrast, within impact measures, all the metrics were well documented, thus serving as a good baseline comparator. With our framework, we classified, delineated, and defined quantitative measures and metrics for feasibility. Our framework, with its defined measures/metrics, could reduce misclassification and improve the overall quality of reporting for monitoring and evaluation of rapid point-of-care technology strategies and their context-driven optimization.

Measures and Metrics for Feasibility of Proof-of-Concept Studies With Human Immunodeficiency Virus Rapid Point-of-Care Technologies

PubMed Central

Pant Pai, Nitika; Chiavegatti, Tiago; Vijh, Rohit; Karatzas, Nicolaos; Daher, Jana; Smallwood, Megan; Wong, Tom; Engel, Nora

2017-01-01

Objective Pilot (feasibility) studies form a vast majority of diagnostic studies with point-of-care technologies but often lack use of clear measures/metrics and a consistent framework for reporting and evaluation. To fill this gap, we systematically reviewed data to (a) catalog feasibility measures/metrics and (b) propose a framework. Methods For the period January 2000 to March 2014, 2 reviewers searched 4 databases (MEDLINE, EMBASE, CINAHL, Scopus), retrieved 1441 citations, and abstracted data from 81 studies. We observed 2 major categories of measures, that is, implementation centered and patient centered, and 4 subcategories of measures, that is, feasibility, acceptability, preference, and patient experience. We defined and delineated metrics and measures for a feasibility framework. We documented impact measures for a comparison. Findings We observed heterogeneity in reporting of metrics as well as misclassification and misuse of metrics within measures. Although we observed poorly defined measures and metrics for feasibility, preference, and patient experience, in contrast, acceptability measure was the best defined. For example, within feasibility, metrics such as consent, completion, new infection, linkage rates, and turnaround times were misclassified and reported. Similarly, patient experience was variously reported as test convenience, comfort, pain, and/or satisfaction. In contrast, within impact measures, all the metrics were well documented, thus serving as a good baseline comparator. With our framework, we classified, delineated, and defined quantitative measures and metrics for feasibility. Conclusions Our framework, with its defined measures/metrics, could reduce misclassification and improve the overall quality of reporting for monitoring and evaluation of rapid point-of-care technology strategies and their context-driven optimization. PMID:29333105

Application of advanced speech technology in manned penetration bombers

NASA Astrophysics Data System (ADS)

North, R.; Lea, W.

1982-03-01

This report documents research on the potential use of speech technology in a manned penetration bomber aircraft (B-52/G and H). The objectives of the project were to analyze the pilot/copilot crewstation tasks over a three-hour-and forty-minute mission and determine the tasks that would benefit the most from conversion to speech recognition/generation, determine the technological feasibility of each of the identified tasks, and prioritize these tasks based on these criteria. Secondary objectives of the program were to enunciate research strategies in the application of speech technologies in airborne environments, and develop guidelines for briefing user commands on the potential of using speech technologies in the cockpit. The results of this study indicated that for the B-52 crewmember, speech recognition would be most beneficial for retrieving chart and procedural data that is contained in the flight manuals. Technological feasibility of these tasks indicated that the checklist and procedural retrieval tasks would be highly feasible for a speech recognition system.

A systematic review of technology-based interventions for co-occurring substance use and trauma symptoms.

PubMed

Gilmore, Amanda K; Wilson, Sarah M; Skopp, Nancy A; Osenbach, Janyce E; Reger, Greg

2017-09-01

Introduction Technology-based mental health interventions are becoming increasingly common, and several have begun to target multiple outcomes in a single intervention. Recent developments in the treatment of co-occurring posttraumatic stress disorder and substance use disorder has led to the development and testing of technology-based interventions for these disorders. The current systematic review examined technology-based interventions designed to improve mental health outcomes among patients with co-occurring trauma symptoms and substance use. Methods Of 601 articles reviewed, 14 included a technology-based intervention for patients with these co-occurring problems. Results Seven of these studies provided preliminary evidence that technology-based interventions are likely to be efficacious in reducing either trauma symptoms or substance use. The seven remaining studies demonstrated that technology-based interventions for co-occurring trauma symptoms and substance use are feasible. Discussion This review suggests that technology-based interventions for co-occurring trauma symptoms and substance use are feasible, but more work is needed to assess efficacy using scientifically rigorous studies.

Heads-up 3D Microscopy: An Ergonomic and Educational Approach to Microsurgery

PubMed Central

Mendez, Bernardino M.; Chiodo, Michael V.; Vandevender, Darl

2016-01-01

Summary: Traditional microsurgery can lead surgeons to use postures that cause musculoskeletal fatigue, leaving them more prone to work-related injuries. A new technology from TrueVision transmits the microscopic image onto a 3-dimensional (3D) monitor, allowing surgeons to operate while sitting/standing in a heads-up position. The purpose of this study was to evaluate the feasibility of performing heads-up 3D microscopy as a more ergonomic alternative to traditional microsurgery. A feasibility study was conducted comparing heads-up 3D microscopy and traditional microscopy by performing femoral artery anastomoses on 8 Sprague-Dawley rats. Operative times and patency rates for each technology were compared. The 8 microsurgeons completed a questionnaire comparing image quality, comfort, technical feasibility, and educational value of the 2 technologies. Rat femoral artery anastomoses were successfully carried out by all 8 microsurgeons with each technology. There was no significant difference in anastomosis time between heads-up 3D and traditional microscopy (average times, 34.5 and 33.8 minutes, respectively; P = 0.66). Heads-up 3D microscopy was rated superior in neck and back comfort by 75% of participants. Image resolution, field of view, and technical feasibility were found to be superior or equivalent in 75% of participants, whereas 63% evaluated depth perception to be superior or equivalent. Heads-up 3D microscopy is a new technology that improves comfort for the microsurgeon without compromising image quality or technical feasibility. Its use has become prevalent in the field of ophthalmology and may also have utility in plastic and reconstructive surgery. PMID:27579241

Swingbed Amine Carbon Dioxide Removal Flight Experiment - Feasibility Study and Concept Development for Cost-Effective Exploration Technology Maturation on The International Space Station

NASA Technical Reports Server (NTRS)

Hodgson, Edward; Papale, William; Nalette, Timothy; Graf, John; Sweterlitsch, Jeffery; Hayley, Elizabeth; Williams, Antony; Button, Amy

2011-01-01

The completion of International Space Station Assembly and transition to a full six person crew has created the opportunity to create and implement flight experiments that will drive down the ultimate risks and cost for human space exploration by maturing exploration technologies in realistic space environments that are impossible or incredibly costly to duplicate in terrestrial laboratories. An early opportunity for such a technology maturation experiment was recognized in the amine swingbed technology baselined for carbon dioxide and humidity control on the Orion spacecraft and Constellation Spacesuit System. An experiment concept using an existing high fidelity laboratory swing bed prototype has been evaluated in a feasibility and concept definition study leading to the conclusion that the envisioned flight experiment can be both feasible and of significant value for NASA s space exploration technology development efforts. Based on the results of that study NASA has proceeded with detailed design and implementation for the flight experiment. The study effort included the evaluation of technology risks, the extent to which ISS provided unique opportunities to understand them, and the implications of the resulting targeted risks for the experiment design and operational parameters. Based on those objectives and characteristics, ISS safety and integration requirements were examined, experiment concepts developed to address them and their feasibility assessed. This paper will describe the analysis effort and conclusions and present the resulting flight experiment concept. The flight experiment, implemented by NASA and launched in two packages in January and August 2011, integrates the swing bed with supporting elements including electrical power and controls, sensors, cooling, heating, fans, air- and water-conserving functionality, and mechanical packaging structure. It is now on board the ISS awaiting installation and activation.

Beamed-Energy Propulsion (BEP) Study

NASA Technical Reports Server (NTRS)

George, Patrick; Beach, Raymond

2012-01-01

The scope of this study was to (1) review and analyze the state-of-art in beamed-energy propulsion (BEP) by identifying potential game-changing applications, (2) formulate a roadmap of technology development, and (3) identify key near-term technology demonstrations to rapidly advance elements of BEP technology to Technology Readiness Level (TRL) 6. The two major areas of interest were launching payloads and space propulsion. More generally, the study was requested and structured to address basic mission feasibility. The attraction of beamed-energy propulsion (BEP) is the potential for high specific impulse while removing the power-generation mass. The rapid advancements in high-energy beamed-power systems and optics over the past 20 years warranted a fresh look at the technology. For launching payloads, the study concluded that using BEP to propel vehicles into space is technically feasible if a commitment to develop new technologies and large investments can be made over long periods of time. From a commercial competitive standpoint, if an advantage of beamed energy for Earth-to-orbit (ETO) is to be found, it will rest with smaller, frequently launched payloads. For space propulsion, the study concluded that using beamed energy to propel vehicles from low Earth orbit to geosynchronous Earth orbit (LEO-GEO) and into deep space is definitely feasible and showed distinct advantages and greater potential over current propulsion technologies. However, this conclusion also assumes that upfront infrastructure investments and commitments to critical technologies will be made over long periods of time. The chief issue, similar to that for payloads, is high infrastructure costs.

A Feasibility Study on Data Distribution on Optical Media.

ERIC Educational Resources Information Center

Campbell (Bonnie) & Associates, Toronto (Ontario).

This feasibility study assesses the potential of optical technology in the development of accessible bibliographic and location data networks both in Canada and within the international MARC (Machine-Readable Cataloging) network. The study is divided into four parts: (1) a market survey of cataloging and interlibrary loan librarians to determine…

A pilot feasibility study of virtual patient simulation to enhance social work students' brief mental health assessment skills.

PubMed

Washburn, Micki; Bordnick, Patrick; Rizzo, Albert Skip

2016-10-01

This study presents preliminary feasibility and acceptability data on the use of virtual patient (VP) simulations to develop brief assessment skills within an interdisciplinary care setting. Results support the acceptability of technology-enhanced simulations and offer preliminary evidence for an association between engagement in VP practice simulations and improvements in diagnostic accuracy and clinical interviewing skills. Recommendations and next steps for research on technology-enhanced simulations within social work are discussed.

A study of the feasibility of pneumatic transport of municipal solid waste and recyclables in Manhattan using existing transportation infrastructure.

DOT National Transportation Integrated Search

2013-07-01

This study explored possibilities for using existing transportation infrastructure for the cost-effective : installation of pneumatic waste-collection technology in Manhattan. If shown to be economically and : operationally feasible, reducing the num...

TECHNOLOGY ASSESSMENT IN HOSPITALS: LESSONS LEARNED FROM AN EMPIRICAL EXPERIMENT.

PubMed

Foglia, Emanuela; Lettieri, Emanuele; Ferrario, Lucrezia; Porazzi, Emanuele; Garagiola, Elisabetta; Pagani, Roberta; Bonfanti, Marzia; Lazzarotti, Valentina; Manzini, Raffaella; Masella, Cristina; Croce, Davide

2017-01-01

Hospital Based Health Technology Assessment (HBHTA) practices, to inform decision making at the hospital level, emerged as urgent priority for policy makers, hospital managers, and professionals. The present study crystallized the results achieved by the testing of an original framework for HBHTA, developed within Lombardy Region: the IMPlementation of A Quick hospital-based HTA (IMPAQHTA). The study tested: (i) the HBHTA framework efficiency, (ii) feasibility, (iii) the tool utility and completeness, considering dimensions and sub-dimensions. The IMPAQHTA framework deployed the Regional HTA program, activated in 2008 in Lombardy, at the hospital level. The relevance and feasibility of the framework were tested over a 3-year period through a large-scale empirical experiment, involving seventy-four healthcare professionals organized in different HBHTA teams for assessing thirty-two different technologies within twenty-two different hospitals. Semi-structured interviews and self-reported questionnaires were used to collect data regarding the relevance and feasibility of the IMPAQHTA framework. The proposed HBHTA framework proved to be suitable for application at the hospital level, in the Italian context, permitting a quick assessment (11 working days) and providing hospital decision makers with relevant and quantitative information. Performances in terms of feasibility, utility, completeness, and easiness proved to be satisfactory. The IMPAQHTA was considered to be a complete and feasible HBHTA framework, as well as being replicable to different technologies within any hospital settings, thus demonstrating the capability of a hospital to develop a complete HTA, if supported by adequate and well defined tools and quantitative metrics.

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-09-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigations/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating establishment technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies requires by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Remedial Action Assessment System (RAAS): A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buelt, J.L.; Stottlemyre, J.A.; White, M.K.

1991-02-01

Because of the great complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, the DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process required for DOE operable units. DOE operable units are generally more complex in nature because of the existence of multiple waste sites within many of the operable units and the presence of mixed radioactive and hazardous chemical wastes. Consequently, Pacific Northwest Laboratory (PNL) is developing the Remedial Action Assessment System (RAAS), which is aimed at screening, linking, and evaluating established technology processmore » options in support of conducting feasibility studies under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). It is also intended to do the same in support of corrective measures studies required by the Resource Conservation and Recovery Act (RCRA). This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses information on technologies in a graphical and tabular manner, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

FBI fingerprint identification automation study. AIDS 3 evaluation report. Volume 2: Technical feasibility

NASA Technical Reports Server (NTRS)

Mulhall, B. D. L.

1980-01-01

The results of this effort are presented in a manner for use by both the AIDS 3 Operational and Economic Feasibility subtasks as well as the Development of Alternative subtask. The approach taken was to identify the major functions that appear in AIDS 3 and then to determine which technologies would be needed for support. The technologies were then examined from the point of view of reliability, throughput, security, availability, cost and possible future trends. Whenever possible graphs are given to indicate projected costs of rapidly changing technologies.

Exploring healthy eating among ethnic minority students using mobile technology: Feasibility and adherence.

PubMed

Rodgers, Rachel F; Franko, Debra L; Shiyko, Mariya; Intille, Stephen; Wilson, Kelcey; O'Carroll, Dympna; Lovering, Meghan; Matsumoto, Atsushi; Iannuccilli, Alyssa; Luk, Stephanie; Shoemaker, Helen

2016-09-01

Interventions aiming to help ethnically diverse emerging adults engage in healthy eating have had limited success. The aim of this study was to assess the feasibility of and adherence to an intervention capitalizing on mobile technology to improve healthy eating. Participants created an online photo food journal and received motivational text messages three times a day. Satisfaction with the intervention was assessed, as were control variables including depression and body dissatisfaction. In addition, weight and height were measured. Levels of adherence to the photo food journal were high with approximately two photos posted a day at baseline. However, adherence rates decreased over the course of the study. Body dissatisfaction positively predicted adherence, while body mass index negatively predicted study satisfaction. Mobile technology provides innovative avenues for healthy eating interventions. Such interventions appear acceptable and feasible for a short period; however, more work is required to evaluate their viability regarding long-term engagement. © The Author(s) 2015.

DEWATERING WASTEWATER TREATMENT SLUDGE BY CLATHRATE FREEZING: A BENCH-SCALE FEASIBILITY STUDY

EPA Science Inventory

Laboratory studies were performed to prove the concept and feasibility for a novel technology to dewater sludges. This involves the formation of solid hydrate crystals of water and specific clathrate-forming agents followed by separation of the hydrate crystal solids from the slu...

EMERGING TECHNOLOGY SUMMARY: DEMONSTRATION OF AMBERSORB 563 ADSORBENT TECHNOLOGY

EPA Science Inventory

A field pilot study was conducted to demonstrate the technical feasibility and cost-effectiveness of Ambersorb® 5631 carbonaceous adsorbent for remediating groundwater contaminated with volatile organic compounds (VOCs). The Ambersorb adsorbent technology demonstration consist...

Ghana refinery expansion and modernization project. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-11-01

The U.S. Trade and Development Program (TDP) is considering the provision of funds to the Ghanaian Ministry of Fuel and Power (MFP) to conduct a study of the scope and feasibility of expanding and modernizing its Tema Refinery to meet future demands for gasoline and to minimize heavy fuel oil production. All of the needed licensed process technology and process know-how could be provided by U.S. sources and this, coupled with U.S. equipment and catalyst supply, meets the TDP criteria for funding the feasibility study. Europe aggressively offers alternate licensable technology for some of the processes. U.S. manufacturers of specialtymore » equipment are marginally competitive in the international market, where competition is fierce. The Definitional Mission recommends that full feasibility study be undertaken.« less

Longitudinal Study of the Market Penetration of Cockpit Weather Information Systems

NASA Technical Reports Server (NTRS)

Stough, Harry Paul, III; Sireli, Yesim; Ozan, Erol; Kauffmann, Paul

2005-01-01

The purpose of the longitudinal research of the market penetration of cockpit weather information systems (CWIS) is to contribute to the body of knowledge on modeling advanced technology feasibility in aviation by tracking and analyzing the market adoption of CWIS over a three year period. This research takes advantage of a previous study, conducted by Dr. Paul Kauffmann in 2000, which demonstrated an integrated and cost effective approach to evaluate advanced technology feasibility, examining the feasibility of CWIS in five market segments: transport, commuter, general aviation, business, and rotorcraft. The longitudinal research consists of two consecutive studies and produced two reports. The first report was submitted in August 2003 and included general market analysis about the CWIS products in the market at the time, identified their characteristics and examined developing market dynamics.

Computerised mirror therapy with Augmented Reflection Technology for early stroke rehabilitation: clinical feasibility and integration as an adjunct therapy.

PubMed

Hoermann, Simon; Ferreira Dos Santos, Luara; Morkisch, Nadine; Jettkowski, Katrin; Sillis, Moran; Devan, Hemakumar; Kanagasabai, Parimala S; Schmidt, Henning; Krüger, Jörg; Dohle, Christian; Regenbrecht, Holger; Hale, Leigh; Cutfield, Nicholas J

2017-07-01

New rehabilitation strategies for post-stroke upper limb rehabilitation employing visual stimulation show promising results, however, cost-efficient and clinically feasible ways to provide these interventions are still lacking. An integral step is to translate recent technological advances, such as in virtual and augmented reality, into therapeutic practice to improve outcomes for patients. This requires research on the adaptation of the technology for clinical use as well as on the appropriate guidelines and protocols for sustainable integration into therapeutic routines. Here, we present and evaluate a novel and affordable augmented reality system (Augmented Reflection Technology, ART) in combination with a validated mirror therapy protocol for upper limb rehabilitation after stroke. We evaluated components of the therapeutic intervention, from the patients' and the therapists' points of view in a clinical feasibility study at a rehabilitation centre. We also assessed the integration of ART as an adjunct therapy for the clinical rehabilitation of subacute patients at two different hospitals. The results showed that the combination and application of the Berlin Protocol for Mirror Therapy together with ART was feasible for clinical use. This combination was integrated into the therapeutic plan of subacute stroke patients at the two clinical locations where the second part of this research was conducted. Our findings pave the way for using technology to provide mirror therapy in clinical settings and show potential for the more effective use of inpatient time and enhanced recoveries for patients. Implications for Rehabilitation Computerised Mirror Therapy is feasible for clinical use Augmented Reflection Technology can be integrated as an adjunctive therapeutic intervention for subacute stroke patients in an inpatient setting Virtual Rehabilitation devices such as Augmented Reflection Technology have considerable potential to enhance stroke rehabilitation.

75 FR 27112 - Solicitation of Applications and Notice of Funding Availability for the FRA Railroad System...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-13

... (2) to conduct a Study of the Use of Bio- based Technologies (Lubricants) that can be used in... of the Use of Bio-based Technologies.'' The study will focus on the feasibility of using readily... two grants, ``Locomotive Biofuel Study'' and the ``Study of the Use of Bio-based Technologies...

Energy Efficient Engine program advanced turbofan nacelle definition study

NASA Technical Reports Server (NTRS)

Howe, David C.; Wynosky, T. A.

1985-01-01

Advanced, low drag, nacelle configurations were defined for some of the more promising propulsion systems identified in the earlier Benefit/Cost Study, to assess the benefits associated with these advanced technology nacelles and formulate programs for developing these nacelles and low volume thrust reversers/spoilers to a state of technology readiness in the early 1990's. The study results established the design feasibility of advanced technology, slim line nacelles applicable to advanced technology, high bypass ratio turbofan engines. Design feasibility was also established for two low volume thrust reverse/spoiler concepts that meet or exceed the required effectiveness for these engines. These nacelle and thrust reverse/spoiler designs were shown to be applicable in engines with takeoff thrust sizes ranging from 24,000 to 60,000 pounds. The reduced weight, drag, and cost of the advanced technology nacelle installations relative to current technology nacelles offer a mission fuel burn savings ranging from 3.0 to 4.5 percent and direct operating cost plus interest improvements from 1.6 to 2.2 percent.

Applications of space teleoperator technology to the problems of the handicapped

NASA Technical Reports Server (NTRS)

Malone, T. B.; Deutsch, S.; Rubin, G.; Shenk, S. W.

1973-01-01

The identification of feasible and practical applications of space teleoperator technology for the problems of the handicapped were studied. A teleoperator system is defined by NASA as a remotely controlled, cybernetic, man-machine system designed to extend and augment man's sensory, manipulative, and locomotive capabilities. Based on a consideration of teleoperator systems, the scope of the study was limited to an investigation of these handicapped persons limited in sensory, manipulative, and locomotive capabilities. If the technology being developed for teleoperators has any direct application, it must be in these functional areas. Feasible and practical applications of teleoperator technology for the problems of the handicapped are described, and design criteria are presented with each application. A development plan is established to bring the application to the point of use.

An economic analysis of private incentives to adopt DNA barcoding technology for fish species authentication in Canada.

PubMed

Ugochukwu, Albert I; Hobbs, Jill E; Phillips, Peter W B; Gray, Richard

2015-12-01

The increasing spate of species substitution and mislabelling in fish markets has become a concern to the public and a challenge to both the food industry and regulators. Species substitution and mislabelling within fish supply chains occurs because of price incentives to misrepresent products for economic gain. Emerging authenticity technologies, such as the DNA barcoding technology that has been used to identify plants and animal (particularly fish) species through DNA sequencing, offer a potential technological solution to this information problem. However, the adoption of these authenticity technologies depends also on economic factors. The present study uses economic welfare analysis to examine the effects of species substitution and mislabelling in fish markets, and examines the feasibility of the technology for a typical retail store in Canada. It is assumed that increased accuracy of the technology in detecting fraud and enforcement of legal penalties and other associated costs would be likely to discourage cheating. Empirical results suggest that DNA barcoding technology would be feasible presently for a typical retail store only if authentication is done in a third party laboratory, as it may not be feasible on an individual retail store level once fixed and other associated costs of the technology are considered.

The Historical Development of Vaccine Technology: Exploring the Relationship between Science and Technology

ERIC Educational Resources Information Center

Lee, Yeung Chung; Kwok, Ping Wai

2017-01-01

This paper examines the feasibility of using historical case studies to contextualise the learning of the nature of science and technology in a biology lesson. Through exploring the historical development of vaccine technology, students were expected to understand the complexity of the relationships between technology and science beyond the…

Virtual reality and brain computer interface in neurorehabilitation

PubMed Central

Dahdah, Marie; Driver, Simon; Parsons, Thomas D.; Richter, Kathleen M.

2016-01-01

The potential benefit of technology to enhance recovery after central nervous system injuries is an area of increasing interest and exploration. The primary emphasis to date has been motor recovery/augmentation and communication. This paper introduces two original studies to demonstrate how advanced technology may be integrated into subacute rehabilitation. The first study addresses the feasibility of brain computer interface with patients on an inpatient spinal cord injury unit. The second study explores the validity of two virtual environments with acquired brain injury as part of an intensive outpatient neurorehabilitation program. These preliminary studies support the feasibility of advanced technologies in the subacute stage of neurorehabilitation. These modalities were well tolerated by participants and could be incorporated into patients' inpatient and outpatient rehabilitation regimens without schedule disruptions. This paper expands the limited literature base regarding the use of advanced technologies in the early stages of recovery for neurorehabilitation populations and speaks favorably to the potential integration of brain computer interface and virtual reality technologies as part of a multidisciplinary treatment program. PMID:27034541

Feasibility of Using Mobile ECG Recording Technology to Detect Atrial Fibrillation in Low-Resource Settings.

PubMed

Evans, Grahame F; Shirk, Arianna; Muturi, Peter; Soliman, Elsayed Z

2017-12-01

Screening for atrial fibrillation (AF), a major risk factor for stroke that is on the rise in Africa, is becoming increasingly critical. This study sought to examine the feasibility of using mobile electrocardiogram (ECG) recording technology to detect AF. In this prospective observational study, we used a mobile ECG recorder to screen 50 African adults (66% women; mean age 54.3 ± 20.5 years) attending Kijabe Hospital (Kijabe, Kenya). Five hospital health providers involved in this study's data collection process also completed a self-administered survey to obtain information on their access to the Internet and mobile devices, both factors necessary to implement ECG mobile technology. Outcome measures included feasibility (completion of the study and recruitment of the patients on the planned study time frame) and the yield of the screening by the mobile ECG technology (ability to detect previously undiagnosed AF). Patients were recruited in a 2-week period as planned; only 1 of the 51 patients approached refused to participate (98% acceptance rate). All of the 50 patients who agreed to participate completed the test and produced readable ECGs (100% study completion rate). ECG tracings of 4 of the 50 patients who completed the study showed AF (8% AF yield), and none had been previously diagnosed with AF. When asked about continuous access to Internet and personal mobile devices, almost all of the health care providers surveyed answered affirmatively. Using mobile ECG technology in screening for AF in low-resource settings is feasible, and can detect a significant proportion of AF cases that will otherwise go undiagnosed. Further study is needed to examine the cost-effectiveness of this approach for detection of AF and its effect on reducing the risk of stroke in developing countries. Copyright © 2016 World Heart Federation (Geneva). Published by Elsevier B.V. All rights reserved.

Feasibility Study for the PISA ICT Literacy Assessment: Report to Network A

ERIC Educational Resources Information Center

Lennon, Marylou; Kirsch, Irwin; Von Davier, Matthias; Wagner, Michael; Yamamoto, Kentaro

2003-01-01

This report presents the findings of a study conducted to explore the feasibility of developing and delivering an assessment of information and communication technology (ICT) literacy for the Programme for International Student Assessment (PISA). The study was conducted at the request of an expert panel convened by Network A and was funded in…

Technical Feasibility Assessment of Lunar Base Mission Scenarios

NASA Astrophysics Data System (ADS)

Magelssen, Trygve ``Spike''; Sadeh, Eligar

2005-02-01

Investigation of the literature pertaining to lunar base (LB) missions and the technologies required for LB development has revealed an information gap that hinders technical feasibility assessment. This information gap is the absence of technical readiness levels (TRL) (Mankins, 1995) and information pertaining to the criticality of the critical enabling technologies (CETs) that enable mission success. TRL is a means of identifying technical readiness stages of a technology. Criticality is defined as the level of influence the CET has on the mission scenario. The hypothesis of this research study is that technical feasibility is a function of technical readiness and technical readiness is a function of criticality. A newly developed research analysis method is used to identify the technical feasibility of LB mission scenarios. A Delphi is used to ascertain technical readiness levels and CET criticality-to-mission. The research analysis method is applied to the Delphi results to determine the technical feasibility of the LB mission scenarios that include: observatory, science research, lunar settlement, space exploration gateway, space resource utilization, and space tourism. The CETs identified encompasses four major system level technologies of: transportation, life support, structures, and power systems. Results of the technical feasibility assessment show the observatory and science research LB mission scenarios to be more technical ready out of all the scenarios, but all mission scenarios are in very close proximity to each other in regard to criticality and TRL and no one mission scenario stands out as being absolutely more technically ready than any of the other scenarios. What is significant and of value are the Delphi results concerning CET criticality-to-mission and the TRL values evidenced in the Tables that can be used by anyone assessing the technical feasibility of LB missions.

Technical and economic feasibility of integrated video service by satellite

NASA Technical Reports Server (NTRS)

Price, K. M.; Kwan, R. K.; White, L. W.; Garlow, R. K.; Henderson, T. R.

1992-01-01

A feasibility study is presented of utilizing modern satellite technology, or more advanced technology, to create a cost-effective, user-friendly, integrated video service, which can provide videophone, video conference, or other equivalent wideband service on demand. A system is described that permits a user to select a desired audience and establish the required links similar to arranging a teleconference by phone. Attention is given to video standards, video traffic scenarios, satellite system architecture, and user costs.

Feasibility Study of Non-Destructive Techniques to Measure Corrosion in SAVY Containers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Davenport, Matthew Nicholas

2016-07-15

Stainless Steel SAVY containers are used to transport and store nuclear material. They are prone to interior corrosion in the presence of certain chemicals and a low-oxygen environment. SAVY containers also have relatively thin walls to reduce their weight, making their structural integrity more vulnerable to the effects of corrosion. A nondestructive evaluation system that finds and monitors corrosion within containers in use would improve safety conditions and preclude hazards. Non-destructive testing can determine whether oxidation or corrosion is occurring inside the SAVY containers, and there are a variety of non-destructive testing methods that may be viable. The feasibility studymore » described will objectively decide which method best fits the requirements of the facility and the problem. To improve efficiency, the containers cannot be opened during the non-destructive examination. The chosen technique should also be user-friendly and relatively quick to apply. It must also meet facility requirements regarding wireless technology and maintenance. A feasibility study is an objective search for a new technology or product to solve a particular problem. First, the design, technical, and facility feasibility requirements are chosen and ranked in order of importance. Then each technology considered is given a score based upon a standard ranking system. The technology with the highest total score is deemed the best fit for a certain application.« less

Feasibility of Retrofitting Lifts on Commuter and Light Rail Vehicles

DOT National Transportation Integrated Search

1980-09-01

The objectives of this study were to determine if lift retrofit applications to rail vehicles are technically feasible, and if so, the extent to which existing bus lift technology can be utilized. This report examines some of the technical issues ass...

STTR Phase 1 Final Technical Report for Project Entitled "Developing a Mobile Torrefaction Machine"

DOE Office of Scientific and Technical Information (OSTI.GOV)

James, Joseph J.

The goal of this project, sponsored by Agri-Tech Producers, LLC (ATP), the small business grantee, was to determine if the torrefaction technology, developed by North Carolina State University (NCSU), which ATP has licensed, could be feasibly deployed in a mobile unit. The study adds to the area investigated, by having ATP’s STTR Phase I team give thoughtful consideration to how to use NCSU’s technology in a mobile unit. The findings by ATP’s team were that NCSU’s technology would best perform in units 30’ by 80’ (See Spec Sheet for the Torre-Tech 5.0 Unit in the Appendix) and the technical effectivenessmore » and economic feasibility investigation suggested that such units were not easily, efficiently or safely utilized in a forest or farm setting. (Note rendering of possible mobile system in the Appendix) Therefore, the findings by ATP’s team were that NCSU’s technology could not feasibly be deployed as a mobile unit.« less

Intersubjective decision-making for computer-aided forging technology design

NASA Astrophysics Data System (ADS)

Kanyukov, S. I.; Konovalov, A. V.; Muizemnek, O. Yu.

2017-12-01

We propose a concept of intersubjective decision-making for problems of open-die forging technology design. The intersubjective decisions are chosen from a set of feasible decisions using the fundamentals of the decision-making theory in fuzzy environment according to the Bellman-Zadeh scheme. We consider the formalization of subjective goals and the choice of membership functions for the decisions depending on subjective goals. We study the arrangement of these functions into an intersubjective membership function. The function is constructed for a resulting decision, which is chosen from a set of feasible decisions. The choice of the final intersubjective decision is discussed. All the issues are exemplified by a specific technological problem. The considered concept of solving technological problems under conditions of fuzzy goals allows one to choose the most efficient decisions from a set of feasible ones. These decisions correspond to the stated goals. The concept allows one to reduce human participation in automated design. This concept can be used to develop algorithms and design programs for forging numerous types of forged parts.

Amplifier arrays for CMB polarization

NASA Technical Reports Server (NTRS)

Gaier, Todd; Lawrence, Charles R.; Seiffert, Michael D.; Wells, Mary M.; Kangaslahti, Pekka; Dawson, Douglas

2003-01-01

Cryogenic low noise amplifier technology has been successfully used in the study of the cosmic microwave background (CMB). MMIC (Monolithic Millimeter wave Integrated Circuit) technology makes the mass production of coherent detection receivers feasible.

Opto-acoustic image fusion technology for diagnostic breast imaging in a feasibility study

NASA Astrophysics Data System (ADS)

Zalev, Jason; Clingman, Bryan; Herzog, Don; Miller, Tom; Ulissey, Michael; Stavros, A. T.; Oraevsky, Alexander; Lavin, Philip; Kist, Kenneth; Dornbluth, N. C.; Otto, Pamela

2015-03-01

Functional opto-acoustic (OA) imaging was fused with gray-scale ultrasound acquired using a specialized duplex handheld probe. Feasibility Study findings indicated the potential to more accurately characterize breast masses for cancer than conventional diagnostic ultrasound (CDU). The Feasibility Study included OA imagery of 74 breast masses that were collected using the investigational Imagio® breast imaging system. Superior specificity and equal sensitivity to CDU was demonstrated, suggesting that OA fusion imaging may potentially obviate the need for negative biopsies without missing cancers in a certain percentage of breast masses. Preliminary results from a 100 subject Pilot Study are also discussed. A larger Pivotal Study (n=2,097 subjects) is underway to confirm the Feasibility Study and Pilot Study findings.

Cape Blanco wind farm feasibility study

NASA Astrophysics Data System (ADS)

1987-11-01

The Cape Blanco Wind Farm (CBWF) Feasibility Study was undertaken as a prototype for determining the feasibility of proposals for wind energy projects at Northwest sites. It was intended to test for conditions under which wind generation of electricity could be commercially feasible, not by another abstract survey of alternative technologies, but rather through a site-specific, machine-specific analysis of one proposal. Some of the study findings would be most pertinent to the Cape Blanco site - local problems require local solutions. Other findings would be readily applicable to other sites and other machines, and study methodologies would be designed to be modified for appraisal of other proposals. This volume discusses environmental, economic, and technical issues of the Wind Farm.

Economic feasibility of converting center pivot irrigation to subsurface drip irrigation

USDA-ARS?s Scientific Manuscript database

Advancements in irrigation technology have increased water use efficiency. However, producers can be reluctant to convert to a more efficient irrigation system when the initial investment costs are high. This study examines the economic feasibility of replacing low energy precision application (LEPA...

Tolerating the Intolerable: Flash Smelting of Copper and the Construction of Technological Constraints.

PubMed

Korhonen, Janne M

2018-01-01

Material and energy constraints have had a major influence in the history of technology. However, prior research has surprisingly little to say about what these constraints actually are, how they emerge, and which are the mechanisms through which they influence technological change. This article studies a case where energy constraints were supposedly the source of a radical innovation in copper smelting in post-Second World War Finland. It finds that the constraints were significantly more ambiguous and socially constructed than the technologists themselves acknowledged, and highlights the context dependence of constraints and how technologists may perceive them. Technological feasibility influences the perception of constraints, and the perception of constraints influences what is found to be technologically feasible. This relationship is moderated by political power wielded by technologists.

Health behavior change in pregnant women: a two-phase study.

PubMed

Davis, Ann M; Wambach, Karen A; Nelson, Eve Lynn; Odar, Cathleen; Lillis, Teresa; McKinley, Amanda; Gallagher, Mia

2014-12-01

Maternal health behaviors during pregnancy/infancy can have a significant impact on maternal and child health. Many women engage in health risk behaviors during pregnancy. Multiple health behavior change (MHBC) interventions provide support to change health behaviors, but further information is needed on potential targets for such an intervention, as well as on the feasibility of technology use and e-health with this population. Two studies were completed as part of this project. First, a survey to examine views regarding health behaviors, desires to change health behaviors, and use of technology was completed by 68 pregnant women presenting for routine care. Based on survey findings, a brief MHBC e-health educational intervention related to breastfeeding, healthy nutrition/lifestyle, and stress management, using iPad(®) (Apple, Cupertino, CA) and text-messaging media, was then developed and piloted in the home with five pregnant women. In the survey, the majority of participants reported interest in receiving help to improve health behaviors, including losing weight or eating a healthier diet, breastfeeding, smoking cessation, and help with depression. The majority of women reported access to a computer with Internet, a phone, and frequent use of text messaging. In the second phase, results suggest that the home-based intervention was feasible and that the technology was convenient and user-friendly. Pregnant women are interested in improving health behaviors and found a brief technology-based e-health intervention feasible, convenient, and user-friendly. In-home technology appears to be a feasible and convenient approach to addressing the multiple health behavior change needs of pregnant women.

Battery energy storage market feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraft, S.; Akhil, A.

1997-07-01

Under the sponsorship of the Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed energy storage as an important enabling technology to enable increased use of renewable energy and as amore » means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).« less

Clinical feasibility study of combined opto-acoustic and ultrasonic imaging modality providing coregistered functional and anatomical maps of breast tumors

NASA Astrophysics Data System (ADS)

Zalev, Jason; Clingman, Bryan; Smith, Remie J.; Herzog, Don; Miller, Tom; Stavros, A. Thomas; Ermilov, Sergey; Conjusteau, André; Tsyboulski, Dmitri; Oraevsky, Alexander A.; Kist, Kenneth; Dornbluth, N. C.; Otto, Pamela

2013-03-01

We report on findings from the clinical feasibility study of the ImagioTM. Breast Imaging System, which acquires two-dimensional opto-acoustic (OA) images co-registered with conventional ultrasound using a specialized duplex hand-held probe. Dual-wavelength opto-acoustic technology is used to generate parametric maps based upon total hemoglobin and its oxygen saturation in breast tissues. This may provide functional diagnostic information pertaining to tumor metabolism and microvasculature, which is complementary to morphological information obtained with conventional gray-scale ultrasound. We present co-registered opto-acoustic and ultrasonic images of malignant and benign tumors from a recent clinical feasibility study. The clinical results illustrate that the technology may have the capability to improve the efficacy of breast tumor diagnosis. In doing so, it may have the potential to reduce biopsies and to characterize cancers that were not seen well with conventional gray-scale ultrasound alone.

The feasibility of a unified role for NASA regional dissemination centers and technology application teams

NASA Technical Reports Server (NTRS)

1974-01-01

Insights and recommendations arising from a study of the feasibility of combining the NASA Regional Dissemination Center (RDC) and Technology Application Team (Tateam) roles to form Regional Application Centers (RADC's) are presented. The apparent convergence of the functions of RDC's and Tateams is demonstrated and strongly supportive of the primary recommendation that an applications function be added to those already being performed by the RDC's. The basis of a national network for technology transfer and public and private sector problem solving is shown to exist, the skeleton of which is an interactive network of Regional Application Centers and NASA Field Centers. The feasibility of developing and extending this network is considered and the detailed ramifications of so doing are discussed and the imperatives emphasized. It is hypothesized that such a national network could become relatively independent of NASA funding within five years.

Feasibility of the Diabetes and Technology for Increased Activity (DaTA) Study: a pilot intervention in high-risk rural adults.

PubMed

Read, Emily

2014-01-01

Rural Canadians are at increased risk of metabolic syndrome. Physical inactivity is a primary target for preventing and reversing metabolic syndrome. Adherence to lifestyle interventions may be enhanced using cell phones and self-monitoring technologies. This study investigated the feasibility of a physical activity and self-monitoring intervention targeting high-risk adults in rural Ontario. Rural adults (n = 25, mean = 57.0 ± 8.7 years) with ≥ 2 criteria for metabolic syndrome participated in an 8-week stage-matched physical activity and self-monitoring intervention. Participants monitored blood glucose, blood pressure, weight, and physical activity using self-monitoring devices and Blackberry Smart phones. VO2max, stage of change, waist circumference, weight, blood lipids, and HbA1c were measured at weeks 1, 4, and 8. Adherence to self-monitoring was > 94%. Participants' experiences and perceptions of the technology were positive. Mean stage of change increased 1 stage, physical activity increased 26%, and predicted VO2max increased 17% (P < .05). Significant changes in weight, waist circumference, diastolic blood pressure, LDL cholesterol, and total cholesterol were found. This stage-matched technology intervention for increased physical activity was feasible and effective.

Investigating the Feasibility of Utilizing Carbon Nanotube Fibers for Spacesuit Dust Mitigation

NASA Technical Reports Server (NTRS)

Manyapu, Kavya K.; de Leon, Pablo; Peltz, Leora; Tsentalovich, Dmitri; Gaier, James R.; Calle, Carlos; Mackey, Paul

2016-01-01

Historical data from the Apollo missions has compelled NASA to identify dust mitigation of spacesuits and other components as a critical path prior to sending humans on potential future lunar exploration missions. Several studies thus far have proposed passive and active countermeasures to address this challenge. However, these technologies have been primarily developed and proven for rigid surfaces such as solar cells and thermal radiators. Integration of these technologies for spacesuit dust mitigation has remained an open challenge due to the complexity of suit design. Current research investigates novel methods to enhance integration of the Electrodynamic Dust Shield (EDS) concept for spacesuits. We leverage previously proven EDS concept developed by NASA for rigid surfaces and apply new techniques to integrate the technology into spacesuits to mitigate dust contamination. The study specifically examines the feasibility of utilizing Carbon Nanotube (CNT) yarns manufactured by Rice University as electrodes in spacesuit material. Proof of concept testing was conducted at NASA Kennedy Space Center using lunar regolith simulant to understand the feasibility of the proposed techniques for spacesuit application. Results from the experiments are detailed in this paper. Potential challenges of applying this technology for spacesuits are also identified.

"FIND Technology": investigating the feasibility, efficacy and safety of controller-free interactive digital rehabilitation technology in an inpatient stroke population: study protocol for a randomized controlled trial.

PubMed

Bird, M L; Cannell, J; Callisaya, M L; Moles, E; Rathjen, A; Lane, K; Tyson, A; Smith, S

2016-04-16

Stroke results in significant disability, which can be reduced by physical rehabilitation. High levels of repetition and activity are required in rehabilitation, but patients are typically sedentary. Using clinically relevant and fun computer games may be one way to achieve increased activity in rehabilitation. A single-blind randomized controlled trial will be conducted to evaluate the feasibility, efficacy and safety of novel stroke-specific rehabilitation software. This software uses controller-free client interaction and inertial motion sensors. Elements of feasibility include recruitment into the trial, ongoing participation (adherence and dropout), perceived benefit, enjoyment and ease of use of the games. Efficacy will be determined by measuring activity and using upper-limb tasks as well as measures of balance and mobility. The hypothesis that the intervention group will have increased levels of physical activity within rehabilitation and improved physical outcomes compared with the control group will be tested. Results from this study will provide a basis for discussion of feasibility of this interactive video technological solution in an inpatient situation. Differences in activity levels between groups will be the primary measure of efficacy. It will also provide data on measures of upper-limb function, balance and mobility. ACTRN12614000427673 . Prospectively registered 17 April 2014.

Feasibility Study of a Satellite Solar Power Station

NASA Technical Reports Server (NTRS)

Glaser, P. E.; Maynard, O. E.; Mackovciak, J. J. R.; Ralph, E. I.

1974-01-01

A feasibility study of a satellite solar power station (SSPS) was conducted to: (1) explore how an SSPS could be flown and controlled in orbit; (2) determine the techniques needed to avoid radio frequency interference (RFI); and (3) determine the key environmental, technological, and economic issues involved. Structural and dynamic analyses of the SSPS structure were performed, and deflections and internal member loads were determined. Desirable material characteristics were assessed and technology developments identified. Flight control performance of the SSPS baseline design was evaluated and parametric sizing studies were performed. The study of RFI avoidance techniques covered (1) optimization of the microwave transmission system; (2) device design and expected RFI; and (3) SSPS RFI effects. The identification of key issues involved (1) microwave generation, transmissions, and rectification and solar energy conversion; (2) environmental-ecological impact and biological effects; and (3) economic issues, i.e., costs and benefits associated with the SSPS. The feasibility of the SSPS based on the parameters of the study was established.

A Feasibility Study to Assess Alternative Energy Program Development Potential at the Community College Level, October 1, 1983-June 30, 1984. Final Report.

ERIC Educational Resources Information Center

Blair, Brittain A.

In 1983-84, a feasibility study was conducted to determine the viability of establishing a comprehensive alternative energy technology program at Southeastern Illinois College (SIC). The study involved an examination of a number of exemplary associate degree programs in alternative energy, through on-site visits and telephone surveys; a survey of…

Technology-based functional assessment in early childhood intervention: a pilot study.

PubMed

Khetani, Mary A; McManus, Beth M; Arestad, Kristen; Richardson, Zachary; Charlifue-Smith, Renee; Rosenberg, Cordelia; Rigau, Briana

2018-01-01

Electronic patient-reported outcomes (e-PROs) may provide valid and feasible options for obtaining family input on their child's functioning for care planning and outcome monitoring, but they have not been adopted into early intervention (EI). The purpose of this pilot study was to evaluate the feasibility of implementing technology-based functional assessment into EI practice and to examine child, family, service, and environmental correlates of caregiver-reported child functioning in the home. In a cross-sectional design, eight individual EI providers participated in a 90-min technology-based functional assessment training to recruit participants and a 60-min semi-structured focus group post data collection. Participants completed the Young Children's Participation and Environment Measure (YC-PEM) home section online and Pediatric Evaluation of Disability Inventory Computer Adaptive Test (PEDI-CAT) via iPad. Participants' EI service use data were obtained from administrative records. A total of 37 caregivers of children between 6 and 35 months old (mean age = 19.4, SD = 7.7) enrolled, a rate of 44% (37/84) in 2.5 months. Providers suggested expanding staff training, gathering data during scheduled evaluations, and providing caregivers and providers with access to assessment summaries. Caregivers wanted their child's participation to change in 56% of home activities. Lower caregiver education and higher EI intensity were related to less child involvement in home activities. Implementing technology-based functional assessment is feasible with modifications, and these data can be useful for highlighting child, family, and EI service correlates of caregiver-reported child functioning that merit further study. Feasibility results informed protocol modifications related to EI provider training, timing of data collection, and management of EI service use data extraction, as preparation for a subsequent scale-up study that is underway.

Accessing best practice resources using mobile technology in an undergraduate nursing program: a feasibility study.

PubMed

Mann, Elizabeth G; Medves, Jennifer; Vandenkerkhof, Elizabeth G

2015-03-01

Mobile technology presents new opportunities for nursing education and ultimately the provision of nursing care. The aim of this study was to explore the utility of mobile technology in undergraduate nursing education. In this evaluation study, undergraduate nursing students were provided with iPod Touch devices containing best practice guidelines. Computer self-efficacy was assessed, and the Theory of Planned Behavior was used to identify potential predictors of the use of mobile technology. Questionnaires were completed at baseline (n = 33) and postimplementation (n = 23). Feedback on feasibility issues was recorded throughout the study period. Students generally found the devices useful, and few technical problems were identified; however, lack of skill in using the devices and lack of support from staff in the clinical setting were commonly identified issues. Self-efficacy scores were high throughout the study. Attitudes, perceptions of the desirability of use, perceived personal control over use, and intentions of using the device were lower postimplementation than at baseline. Attitude toward the technology predicted intention to use the device after graduation. Mobile technology may promote evidence-informed practice; however, supporting students' acquisition of related skills may optimize use. Successful integration of mobile technology into practice requires attention to factors that affect student attitudes.

Technology-delivered adaptations of motivational interviewing for health-related behaviors: A systematic review of the current research

PubMed Central

Shingleton, Rebecca M.; Palfai, Tibor P.

2015-01-01

Objectives The aims of this paper were to describe and evaluate the methods and efficacy of technology-delivered motivational interviewing interventions (TAMIs), discuss the challenges and opportunities of TAMIs, and provide a framework for future research. Methods We reviewed studies that reported using motivational interviewing (MI) based components delivered via technology and conducted ratings on technology description, comprehensiveness of MI, and study methods. Results The majority of studies were fully-automated and included at least one form of media rich technology to deliver the TAMI. Few studies provided complete descriptions of how MI components were delivered via technology. Of the studies that isolated the TAMI effects, positive changes were reported. Conclusion Researchers have used a range of technologies to deliver TAMIs suggesting feasibility of these methods. However, there are limited data regarding their efficacy, and strategies to deliver relational components remain a challenge. Future research should better characterize the components of TAMIs, empirically test the efficacy of TAMIs with randomized controlled trials, and incorporate fidelity measures. Practice Implications TAMIs are feasible to implement and well accepted. These approaches offer considerable potential to reduce costs, minimize therapist and training burden, and expand the range of clients that may benefit from adaptations of MI. PMID:26298219

Feasibility study of algae-based Carbon Dioxide capture ...

EPA Pesticide Factsheets

SUMMARY: The biomass of microalgae contains approximately 50% carbon, which is commonly obtained from the atmosphere, but can also be taken from commercial sources that produce CO2, such as coal-fired power plants. A study of operational demonstration projects is being undertaken to evaluate the benefits of using algae to reduce CO2 emissions from industrial and small-scale utility power boilers. The operations are being studied for the use of CO2 from flue gas for algae growth along with the production of biofuels and other useful products to prepare a comprehensive characterization of the economic feasibility of using algae to capture CO2. Information is being generated for analyses of the potential for these technologies to advance in the market and assist in meeting environmental goals, as well as to examine their associated environmental implications. Three electric power generation plants (coal and fuel oil fired) equipped to send flue-gas emissions to algae culture at demonstration facilities are being studied. Data and process information are being collected and developed to facilitate feasibility and modeling evaluations of the CO2 to algae technology. An understanding of process requirements to apply this technology to existing industries would go far in advancing carbon capture opportunities. Documenting the successful use of this technology could help bring “low-tech”, low-cost, CO2 to algae, carbon capture to multiple size industries and

Remedial Action Assessment System: A computer-based methodology for conducting feasibility studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M.K.; Buelt, J.L.; Stottlemyre, J.A.

1991-02-01

Because of the complexity and number of potential waste sites facing the US Department of Energy (DOE) for potential cleanup, DOE is supporting the development of a computer-based methodology to streamline the remedial investigation/feasibility study process. The Remedial Action Assessment System (RAAS), can be used for screening, linking, and evaluating established technology processes in support of conducting feasibility studies. It is also intended to do the same in support of corrective measures studies. The user interface employs menus, windows, help features, and graphical information while RAAS is in operation. Object-oriented programming is used to link unit processes into sets ofmore » compatible processes that form appropriate remedial alternatives. Once the remedial alternatives are formed, the RAAS methodology can evaluate them in terms of effectiveness, implementability, and cost. RAAS will access a user-selected risk assessment code to determine the reduction of risk after remedial action by each recommended alternative. The methodology will also help determine the implementability of the remedial alternatives at a site and access cost estimating tools to provide estimates of capital, operating, and maintenance costs. This paper presents the characteristics of two RAAS prototypes currently being developed. These include the RAAS Technology Information System, which accesses graphical, tabular and textual information about technologies, and the main RAAS methodology, which screens, links, and evaluates remedial technologies. 4 refs., 3 figs., 1 tab.« less

Technical Analysis Feasibility Study on Smart Microgrid System in Sekolah Tinggi Teknik PLN

NASA Astrophysics Data System (ADS)

Suyanto, Heri

2018-02-01

Nowadays application of new and renewable energy as main resource of power plant has greatly increased. High penetration of renewable energy into the grid will influence the quality and reliability of the electricity system, due to the intermittent characteristic of new and renewable energy resources. Smart grid or microgrid technology has the ability to deal with this intermittent characteristic especially if these renewable energy resources integrated to grid in large scale, so it can improve the reliability and efficiency of the grid. We plan to implement smart microgrid system at Sekolah Tinggi Teknik PLN as a pilot project. Before the pilot project start, the feasibility study must be conducted. In this feasibility study, the renewable energy resources and load characteristic at the site will be measured. Then the technical aspect of this feasibility study will be analyzed. This paper explains that analysis of ths feasibility study.

Battery energy storage market feasibility study -- Expanded report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kraft, S.; Akhil, A.

1997-09-01

Under the sponsorship of the US Department of Energy`s Office of Utility Technologies, the Energy Storage Systems Analysis and Development Department at Sandia National Laboratories (SNL) contracted Frost and Sullivan to conduct a market feasibility study of energy storage systems. The study was designed specifically to quantify the battery energy storage market for utility applications. This study was based on the SNL Opportunities Analysis performed earlier. Many of the groups surveyed, which included electricity providers, battery energy storage vendors, regulators, consultants, and technology advocates, viewed battery storage as an important technology to enable increased use of renewable energy and asmore » a means to solve power quality and asset utilization issues. There are two versions of the document available, an expanded version (approximately 200 pages, SAND97-1275/2) and a short version (approximately 25 pages, SAND97-1275/1).« less

Feasibility of Popular m-Health Technologies for Activity Tracking Among Individuals with Serious Mental Illness

PubMed Central

Aschbrenner, Kelly A.; Barre, Laura K.; Bartels, Stephen J.

2015-01-01

Abstract Obesity prevalence is nearly double among individuals with serious mental illness (SMI), including schizophrenia spectrum disorders, bipolar disorder, or major depressive disorder, compared with the general population. Emerging mobile health (m-health) technologies are increasingly available and offer the potential to support lifestyle interventions targeting weight loss, yet the practical feasibility of using these technologies in this high-risk group has not been established. We evaluated the feasibility and acceptability of popular m-health technologies for activity tracking among overweight and obese individuals with SMI. We provided wearable activity monitoring devices (FitBit [San Francisco, CA] Zip™ or Nike Inc. [Beaverton, OR] FuelBand) and smartphones (Apple [Cupertino, CA] iPhone® 4S) for accessing the smartphone application for each device to participants with SMI enrolled in a weight loss program. Feasibility of these devices was measured by the frequency of use over time. Acceptability was measured through qualitative follow-up interviews with participants. Ten participants with SMI wore the devices for a mean of 89% (standard deviation=13%) of the days in the study. Five participants wore the devices 100% of the time. Participants reported high satisfaction, stating the devices were easy to use, helpful for setting goals, motivational, and useful for self-monitoring. Several participants liked the social connectivity feature of the devices where they could see each other's progress on the smartphone application, noting that “friendly” competition increased motivation to be more physically active. This study supports using popular m-health technologies for activity tracking among individuals with SMI. These findings can inform the design of weight loss interventions targeting this vulnerable patient population. PMID:25536190

Feasibility of popular m-health technologies for activity tracking among individuals with serious mental illness.

PubMed

Naslund, John A; Aschbrenner, Kelly A; Barre, Laura K; Bartels, Stephen J

2015-03-01

Obesity prevalence is nearly double among individuals with serious mental illness (SMI), including schizophrenia spectrum disorders, bipolar disorder, or major depressive disorder, compared with the general population. Emerging mobile health (m-health) technologies are increasingly available and offer the potential to support lifestyle interventions targeting weight loss, yet the practical feasibility of using these technologies in this high-risk group has not been established. We evaluated the feasibility and acceptability of popular m-health technologies for activity tracking among overweight and obese individuals with SMI. We provided wearable activity monitoring devices (FitBit [San Francisco, CA] Zip™ or Nike Inc. [Beaverton, OR] FuelBand) and smartphones (Apple [Cupertino, CA] iPhone(®) 4S) for accessing the smartphone application for each device to participants with SMI enrolled in a weight loss program. Feasibility of these devices was measured by the frequency of use over time. Acceptability was measured through qualitative follow-up interviews with participants. Ten participants with SMI wore the devices for a mean of 89% (standard deviation=13%) of the days in the study. Five participants wore the devices 100% of the time. Participants reported high satisfaction, stating the devices were easy to use, helpful for setting goals, motivational, and useful for self-monitoring. Several participants liked the social connectivity feature of the devices where they could see each other's progress on the smartphone application, noting that "friendly" competition increased motivation to be more physically active. This study supports using popular m-health technologies for activity tracking among individuals with SMI. These findings can inform the design of weight loss interventions targeting this vulnerable patient population.

Feasibility, Acceptability, and Preliminary Effectiveness of a Peer-Delivered and Technology Supported Self-Management Intervention for Older Adults with Serious Mental Illness.

PubMed

Fortuna, Karen L; DiMilia, Peter R; Lohman, Matthew C; Bruce, Martha L; Zubritsky, Cynthia D; Halaby, Mitch R; Walker, Robert M; Brooks, Jessica M; Bartels, Stephen J

2018-06-01

To assess the feasibility, acceptability, and preliminary effectiveness of a peer-delivered and technology supported integrated medical and psychiatric self-management intervention for older adults with serious mental illness. Ten older adults with serious mental illness (i.e., schizophrenia, schizoaffective disorder, bipolar disorder, or major depressive disorder) and medical comorbidity (i.e., cardiovascular disease, obesity, diabetes, chronic obstructive pulmonary disease, hypertension, and/or high cholesterol) aged 60 years and older received the PeerTECH intervention in their homes. Three certified peer specialists were trained to deliver PeerTECH. Data were collected at baseline, one-month, and three-month. The pilot study demonstrated that a three-month, peer-delivered and technology-supported integrated medical and psychiatric self-management intervention ("PeerTECH") was experienced by peer specialists and participants as feasible and acceptable. PeerTECH was associated with statistically significant improvements in psychiatric self-management. In addition, pre/post, non-statistically significant improvements were observed in self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment. This pre/post pilot study demonstrated it is possible to train peers to use technology to deliver an integrated psychiatric and medical self-management intervention in a home-based setting to older adults with serious mental illness with fidelity. These findings provide preliminary evidence that a peer-delivered and technology-supported intervention designed to improve medical and psychiatric self-management is feasible, acceptable, and is potentially associated with improvements in psychiatric self-management, self-efficacy for managing chronic health conditions, hope, quality of life, medical self-management skills, and empowerment with older adults with serious mental illness and chronic health conditions.

Development of a congestion management system using GPS technology

DOT National Transportation Integrated Search

1997-04-01

This report describes the results of a study undertaken to demonstrate the feasibility of using global positioning system (GPS) and geographic information system (GIS) technologies to measure travel time and speed data on urban highways. The methodol...

Technological Improvements to Automobile Fuel Consumption : Volume 1. Executive Summary.

DOT National Transportation Integrated Search

1974-02-01

This report is a priliminary survey of the technological feasibility of reducing the fuel consumption of automobiles. The study uses as a reference information derived from literature, automobile industry contacts, and testing conducted as part of th...

Mars Sample Return Orbiter Rapid Architecture Study

NASA Astrophysics Data System (ADS)

Godfrey, A.; Johnson, M.; Stroud, C.

2018-04-01

An overview of rapid systems analysis (mass, risk, and schedule) on 1000s of MSRO configurations to understand key technologies and feasible options. Can we generate enough power? Can we aerobrake in time? Are some technology elements just too risky?

Health Technology-Enabled Interventions for Adherence Support and Retention in Care Among US HIV-Infected Adolescents and Young Adults: An Integrative Review.

PubMed

Navarra, Ann-Margaret Dunn; Gwadz, Marya Viorst; Whittemore, Robin; Bakken, Suzanne R; Cleland, Charles M; Burleson, Winslow; Jacobs, Susan Kaplan; Melkus, Gail D'Eramo

2017-11-01

The objective of this integrative review was to describe current US trends for health technology-enabled adherence interventions among behaviorally HIV-infected youth (ages 13-29 years), and present the feasibility and efficacy of identified interventions. A comprehensive search was executed across five electronic databases (January 2005-March 2016). Of the 1911 identified studies, nine met the inclusion criteria of quantitative or mixed methods design, technology-enabled adherence and or retention intervention for US HIV-infected youth. The majority were small pilots. Intervention dose varied between studies applying similar technology platforms with more than half not informed by a theoretical framework. Retention in care was not a reported outcome, and operationalization of adherence was heterogeneous across studies. Despite these limitations, synthesized findings from this review demonstrate feasibility of computer-based interventions, and initial efficacy of SMS texting for adherence support among HIV-infected youth. Moving forward, there is a pressing need for the expansion of this evidence base.

Pediatric eMental healthcare technologies: a systematic review of implementation foci in research studies, and government and organizational documents.

PubMed

Gehring, Nicole D; McGrath, Patrick; Wozney, Lori; Soleimani, Amir; Bennett, Kathryn; Hartling, Lisa; Huguet, Anna; Dyson, Michele P; Newton, Amanda S

2017-06-21

Researchers, healthcare planners, and policymakers convey a sense of urgency in using eMental healthcare technologies to improve pediatric mental healthcare availability and access. Yet, different stakeholders may focus on different aspects of implementation. We conducted a systematic review to identify implementation foci in research studies and government/organizational documents for eMental healthcare technologies for pediatric mental healthcare. A search of eleven electronic databases and grey literature was conducted. We included research studies and documents from organization and government websites if the focus included eMental healthcare technology for children/adolescents (0-18 years), and implementation was studied and reported (research studies) or goals/recommendations regarding implementation were made (documents). We assessed study quality using the Mixed Methods Appraisal Tool and document quality using the Appraisal of Guidelines for Research & Evaluation II. Implementation information was grouped according to Proctor and colleagues' implementation outcomes-acceptability, adoption, appropriateness, cost, feasibility, fidelity, penetration, and sustainability-and grouped separately for studies and documents. Twenty research studies and nine government/organizational documents met eligibility criteria. These articles represented implementation of eMental healthcare technologies in the USA (14 studies), United Kingdom (2 documents, 3 studies), Canada (2 documents, 1 study), Australia (4 documents, 1 study), New Zealand (1 study), and the Netherlands (1 document). The quality of research studies was excellent (n = 11), good (n = 6), and poor (n = 1). These eMental health studies focused on the acceptability (70%, n = 14) and appropriateness (50%, n = 10) of eMental healthcare technologies to users and mental healthcare professionals. The quality of government and organizational documents was high (n = 2), medium (n = 6), and low (n = 1). These documents focused on cost (100%, n = 9), penetration (89%, n = 8), feasibility (78%, n = 7), and sustainability (67%, n = 6) of implementing eMental healthcare technology. To date, research studies have largely focused on acceptability and appropriateness, while government/organizational documents state goals and recommendations regarding costs, feasibility, and sustainability of eMental healthcare technologies. These differences suggest that the research evidence available for pediatric eMental healthcare technologies does not reflect the focus of governments and organizations. Partnerships between researchers, healthcare planners, and policymakers may help to align implementation research with policy development, decision-making, and funding foci.

Exoskeleton for Soldier Enhancement Systems Feasibility Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jansen, J.F.

2000-09-28

The development of a successful exoskeleton for human performance augmentation (EHPA) will require a multi-disciplinary systems approach based upon sound biomechanics, power generation and actuation systems, controls technology, and operator interfaces. The ability to integrate key components into a system that enhances performance without impeding operator mobility is essential. The purpose of this study and report are to address the issue of feasibility of building a fieldable EHPA. Previous efforts, while demonstrating progress and enhancing knowledge, have not approached the level required for a fully functional, fieldable system. It is doubtless that the technologies required for a successful exoskeleton havemore » advanced, and some of them significantly. The question to be addressed in this report is have they advanced to the point of making a system feasible in the next three to five years? In this study, the key technologies required to successfully build an exoskeleton have been examined. The primary focus has been on the key technologies of power sources, actuators, and controls. Power sources, including internal combustion engines, fuel cells, batteries, super capacitors, and hybrid sources have been investigated and compared with respect to the exoskeleton application. Both conventional and non-conventional actuator technologies that could impact EHPA have been assessed. In addition to the current state of the art of actuators, the potential for near-term improvements using non-conventional actuators has also been addressed. Controls strategies, and their implication to the design approach, and the exoskeleton to soldier interface have also been investigated. In addition to these key subsystems and technologies, this report addresses technical concepts and issues relating to an integrated design. A recommended approach, based on the results of the study is also presented.« less

Feasibility of Jujube peeling using novel infrared radiation heating technology

USDA-ARS?s Scientific Manuscript database

Infrared (IR) radiation heating has a promising potential to be used as a sustainable and effective method to eliminate the use of water and chemicals in the jujube-peeling process and enhance the quality of peeled products. The objective of this study was to investigate the feasibility of use IR he...

Middle School Students' Motivation for Learning Technology in South Korea

ERIC Educational Resources Information Center

Kwon, Hyuksoo

2016-01-01

This study aims to develop a feasible instrument for determining middle school students' motivation to learn technology in South Korea. The authors translated Glynn's motivational instrument and modified it to measure Korean middle school students' motivation to learn technology. The instrument was applied to 441 students of grade 8 and 9 from six…

78 FR 23335 - Energy Conservation Program: Energy Conservation Standards for Distribution Transformers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-18

... Basic Impulse Level 4. Dual/Multiple-Voltage Primary Windings 5. Dual/Multiple-Voltage Secondary Windings 6. Loading B. Technological Feasibility 1. General 2. Maximum Technologically Feasible Levels C...

Multimodal activity monitoring for home rehabilitation of geriatric fracture patients--feasibility and acceptance of sensor systems in the GAL-NATARS study.

PubMed

Marschollek, Michael; Becker, Marcus; Bauer, Jürgen M; Bente, Petra; Dasenbrock, Lena; Elbers, Katharina; Hein, Andreas; Kolb, Gerald; Künemund, Harald; Lammel-Polchau, Christopher; Meis, Markus; Meyer Zu Schwabedissen, Hubertus; Remmers, Hartmut; Schulze, Mareike; Steen, Enno-Edzard; Thoben, Wilfried; Wang, Ju; Wolf, Klaus-Hendrik; Haux, Reinhold

2014-01-01

Demographic change will lead to a diminishing care workforce faced with rising numbers of older persons in need of care, suggesting meaningful use of health-enabling technologies, and home monitoring in particular, to contribute to supporting both the carers and the persons in need. We present and discuss the GAL-NATARS study design along with first results regarding technical feasibility of long-term home monitoring and acceptance of different sensor modalities. Fourteen geriatric participants with mobility-impairing fractures were recruited in three geriatric clinics. Following inpatient geriatric rehabilitation, their homes were equipped with ambient sensor components for three months. Additionally, a wearable accelerometer was employed. Technical feasibility was assessed by system and component downtimes, technology acceptance by face-to-face interviews. The overall system downtime was 6%, effected by two single events, but not by software failures. Technology acceptance was rated very high by all participants at the end of the monitoring periods, and no interference with their social lives was reported. Home-monitoring technologies were well-accepted by our participants. The information content of the data still needs to be evaluated with regard to clinical outcome parameters as well as the effect on the quality of life before recommending large-scale implementations.

Development of a congestion management system using GPS technology : technical summary.

DOT National Transportation Integrated Search

1996-11-01

The overall goal of this research study was to demonstrate the feasibility of using global positioning system (GPS) and geographic information system (GIS) technologies to measure travel time and speed data on urban highways.Compared to more traditio...

Development of a congestion management system using GPS technology : volume I.

DOT National Transportation Integrated Search

1997-04-01

This report describes the results of a study undertaken to demonstrate the feasibility of using global positioning system( GPS) and geographic information system (CIS) technologies to measure travel time and speed data on urban highways. Compared to ...

Feasibility Study of Cargo Airship Transportation Systems Powered by New Green Energy Technologies

NASA Technical Reports Server (NTRS)

Skuza, Jonathan R.; Park, Yeonjoon; Kim, Hyun Jung; Seaman, Shane T.; King, Glen C.; Choi, Sang H.; Song, Kyo D.; Yoon, Hargsoon; Lee, Kunik

2014-01-01

The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

Macromolecular Crystal Growth by Means of Microfluidics

NASA Technical Reports Server (NTRS)

vanderWoerd, Mark; Ferree, Darren; Spearing, Scott; Monaco, Lisa; Molho, Josh; Spaid, Michael; Brasseur, Mike; Curreri, Peter A. (Technical Monitor)

2002-01-01

We have performed a feasibility study in which we show that chip-based, microfluidic (LabChip(TM)) technology is suitable for protein crystal growth. This technology allows for accurate and reliable dispensing and mixing of very small volumes while minimizing bubble formation in the crystallization mixture. The amount of (protein) solution remaining after completion of an experiment is minimal, which makes this technique efficient and attractive for use with proteins, which are difficult or expensive to obtain. The nature of LabChip(TM) technology renders it highly amenable to automation. Protein crystals obtained in our initial feasibility studies were of excellent quality as determined by X-ray diffraction. Subsequent to the feasibility study, we designed and produced the first LabChip(TM) device specifically for protein crystallization in batch mode. It can reliably dispense and mix from a range of solution constituents into two independent growth wells. We are currently testing this design to prove its efficacy for protein crystallization optimization experiments. In the near future we will expand our design to incorporate up to 10 growth wells per LabChip(TM) device. Upon completion, additional crystallization techniques such as vapor diffusion and liquid-liquid diffusion will be accommodated. Macromolecular crystallization using microfluidic technology is envisioned as a fully automated system, which will use the 'tele-science' concept of remote operation and will be developed into a research facility for the International Space Station as well as on the ground.

Feasibility of mobile mental wellness training for older adults.

PubMed

Similä, Heidi; Immonen, Milla; Toska-Tervola, Jaana; Enwald, Heidi; Keränen, Niina; Kangas, Maarit; Jämsä, Timo; Korpelainen, Raija

2018-03-09

Mobile technology has been increasingly adopted in promotion of mental health among older people. This study assessed the feasibility of a mobile mental wellness training application for individual use and for group work from the perspectives of older adults and social care professionals. The older individuals recruited for the study were participants in a Circle of Friends group and family caregivers' peer support group offered by the communal senior services. The qualitative and quantitative results of interviews, questionnaires, observation, and application usage were reported. Seven older adults started using the application independently at home in parallel with the group activity. This study revealed new information regarding the barriers to the older adults' full adoption of such mobile technologies. The results indicated that there may be potential in the incorporation of mobile technologies in promotion of mental health of older people at group settings. Copyright © 2018 Elsevier Inc. All rights reserved.

The Feasibility of 3D Printing Technology on the Treatment of Pilon Fracture and Its Effect on Doctor-Patient Communication.

PubMed

Zheng, Wenhao; Chen, Chunhui; Zhang, Chuanxu; Tao, Zhenyu; Cai, Leyi

2018-01-01

The aim of this study was to assess the feasibility and effectiveness of the three-dimensional (3D) printing technology in the treatment of Pilon fractures. 100 patients with Pilon fractures from March 2013 to December 2016 were enrolled in our study. They were divided randomly into 3D printing group ( n = 50) and conventional group ( n = 50). The 3D models were used to simulate the surgery and carry out the surgery according to plan in 3D printing group. Operation time, blood loss, fluoroscopy times, fracture union time, and fracture reduction as well as functional outcomes including VAS and AOFAS score and complications were recorded. To examine the feasibility of this approach, we invited surgeons and patients to complete questionnaires. 3D printing group showed significantly shorter operation time, less blood loss volume and fluoroscopy times, higher rate of anatomic reduction and rate of excellent and good outcome than conventional group ( P < 0.001, P < 0.001, P < 0.001, P = 0.040, and P = 0.029, resp.). However, no significant difference was observed in complications between the two groups ( P = 0.510). Furthermore, the questionnaire suggested that both surgeons and patients got high scores of overall satisfaction with the use of 3D printing models. Our study indicated that the use of 3D printing technology to treat Pilon fractures in clinical practice is feasible.

The Feasibility of 3D Printing Technology on the Treatment of Pilon Fracture and Its Effect on Doctor-Patient Communication

PubMed Central

Zheng, Wenhao; Chen, Chunhui; Zhang, Chuanxu; Tao, Zhenyu

2018-01-01

Purpose The aim of this study was to assess the feasibility and effectiveness of the three-dimensional (3D) printing technology in the treatment of Pilon fractures. Methods 100 patients with Pilon fractures from March 2013 to December 2016 were enrolled in our study. They were divided randomly into 3D printing group (n = 50) and conventional group (n = 50). The 3D models were used to simulate the surgery and carry out the surgery according to plan in 3D printing group. Operation time, blood loss, fluoroscopy times, fracture union time, and fracture reduction as well as functional outcomes including VAS and AOFAS score and complications were recorded. To examine the feasibility of this approach, we invited surgeons and patients to complete questionnaires. Results 3D printing group showed significantly shorter operation time, less blood loss volume and fluoroscopy times, higher rate of anatomic reduction and rate of excellent and good outcome than conventional group (P < 0.001, P < 0.001, P < 0.001, P = 0.040, and P = 0.029, resp.). However, no significant difference was observed in complications between the two groups (P = 0.510). Furthermore, the questionnaire suggested that both surgeons and patients got high scores of overall satisfaction with the use of 3D printing models. Conclusion Our study indicated that the use of 3D printing technology to treat Pilon fractures in clinical practice is feasible. PMID:29581985

76 FR 12944 - Children's Products Containing Lead; Technological Feasibility of 100 ppm for Lead Content...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-09

...Section 101(a) of the Consumer Product Safety Improvement Act (``CPSIA'') provides that, as of August 14, 2011, children's products may not contain more than 100 parts per million (``ppm'') of lead unless the U.S. Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') determines that such a limit is not technologically feasible. The Commission may make such a determination only after notice and a hearing and after analyzing the public health protections associated with substantially reducing lead in children's products. On February 16, 2011, the Commission conducted a public hearing to receive views from all interested parties about the technological feasibility of meeting the 100 ppm lead content limit for children's products and associated public health considerations. Individual Commissioners requested at the hearing that certain participants respond to additional questions in writing, as well as submit relevant studies and additional data referenced in oral presentations. Accordingly, through this notice, the Commission is reopening the hearing record until March 24, 2011.

General Aviation Turbine Engine (GATE) study

NASA Technical Reports Server (NTRS)

Baerst, C. F.; Furst, D. G.

1979-01-01

The feasibility of turbine engines for the smaller general aviation aircraft was investigated and a technology program for developing the necessary technology was identified. Major results included the definition of the 1988 general aviation market, the identification of turboprop and turboshaft engines that meet the requirements of the aircraft studies, a benefit analysis showing the superiority of gas turbine engines for portions of the market studied, and detailed plans for the development of the necessary technology.

Performance and technical feasibility comparison of reusable launch systems: A synthesis of the ESA winged launcher studies

NASA Astrophysics Data System (ADS)

Berry, W.; Grallert, H.

1996-02-01

The paper presents a synthesis of the performance and technical feasibility assessment of 7 reusable launcher types, comprising 13 different vehicles, studied by European Industry for ESA in the ESA Winged Launcher Study in the period January 1988 to May 1994. The vehicles comprised single-stage-to-orbit (SSTO) and two-stage-to-orbit (TSTO) vehicles, propelled by either air-breathing/rocket propulsion or entirely by rocket propulsion. The results showed that an SSTO vehicle of the HOTOL-type, propelled by subsonic combustion air-breathing/rocket engines could barely deliver the specified payload mass and was aerodynamically unstable; that a TSTO vehicle of the Saenger type, employing subsonic combustion airbreathing propulsion in its first stage and rocket propulsion in its second stage, could readily deliver the specified payload mass and was found to be technically feasible and versatile; that an SSTO vehicle of the NASP type, propelled by supersonic combustion airbreathing/rocket propulsion was able to deliver a reduced payload mass, was very complex and required very advanced technologies; that an air-launched rocket propelled vehicle of the Interim HOTOL type, although technically feasible, could deliver only a reduced payload mass, being constrained by the lifting capability of the carrier airplane; that three different, entirely rocket-propelled vehicles could deliver the specified payload mass, were technically feasible but required relatively advanced technologies.

ToHajiilee Economic Development, Inc.(TEDI) Feasibility Study for Utility-Scale Solar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burpo, Rob

2012-02-29

To Hajiilee Economic Development, Inc. (TEDI) is the economic development entity representing the ToHajiilee Chapter of the Navajo Nation, also known as the Caoncito Band of Navajo (CBN). Using DOE funding, TEDI assembled a team of qualified advisors to conduct a feasibility study for a utility-scale 30 MW Photovoltaic (PV) solar power generation facility on TEDI trust lands. The goal for this project has been to gather information and practical business commitments to successfully complete the feasibility analysis. The TEDI approach was to successively make informed decisions to select an appropriate technology best suited to the site, determine environmental viabilitymore » of the site, secure options for the sale of generated power, determine practicality of transmission and interconnection of power to the local grid, and secure preliminary commitments on project financing. The feasibility study has been completed and provides TEDI with a practical understanding of its business options in moving forward with developing a solar project on CBN tribal lands. Funding from DOE has allowed TEDI and its team of professional advisors to carefully select technology and business partners and build a business model to develop this utility-scale solar project. As a result of the positive feasibility findings, TEDI is moving forward with finalizing all pre-construction activities for its major renewable energy project.« less

Technological Improvements to Automobile Fuel Consumption : Volume 2A. Sections 1 through 25

DOT National Transportation Integrated Search

1974-12-01

This report is a preliminary survey of the technological feasibility of reducing the fuel consumption of automobiles. The study uses as a reference information derived from literature, automobile industry contacts, and testing conducted as part of th...

IN-SITU DUOX™ CHEMICAL OXIDATION TECHNOLOGY TO TREAT CHLORINATED ORGANICS AT THE ROOSEVELT MILLS SITE, VERNON, CT: SITE CHARACTERIZATION AND TREATABILITY STUDY

EPA Science Inventory

A study was performed investigating the feasibility of applying the DUOX™ chemical oxidation technology to chlorinated solvent contaminated media at the Roosevelt Mills site in Vernon, Connecticut. The Roosevelt Mills site is a former woolen mill that included dry cleaning operat...

Feasibility of new simulation technology to train novice drivers

DOT National Transportation Integrated Search

1996-12-01

This project examined the feasibility of using existing simulation and other electronic device technology with the potential for the safety training of novice drivers. Project activities included: a literature review; site visits and telephone inquir...

Apps, iPads, and Literacy: Examining the Feasibility of Speech Recognition in a First-Grade Classroom

ERIC Educational Resources Information Center

Baker, Elizabeth A.

2017-01-01

Informed by sociocultural and systems theory tenets, this study used ethnographic research methods to examine the feasibility of using speech recognition (SR) technology to support struggling readers in an early elementary classroom setting. Observations of eight first graders were conducted as they participated in a structured SR-supported…

Video medical interpretation over 3G cellular networks: a feasibility study.

PubMed

Locatis, Craig; Williamson, Deborah; Sterrett, James; Detzler, Isabel; Ackerman, Michael

2011-12-01

To test the feasibility of using cell phone technology to provide video medical interpretation services at a distance. Alternative cell phone services were researched and videoconferencing technologies were tried out to identify video products and telecommunication services needed to meet video medical interpretation requirements. The video and telecommunication technologies were tried out in a pharmacy setting and compared with use of the telephone. Outcomes were similar to findings in previous research involving video medical interpretation with higher bandwidth and video quality. Patients appreciated the interpretation service no matter how it is provided, while health providers and interpreters preferred video. It is possible to provide video medical interpretation services via cellular communication using lower bandwidth videoconferencing technology that provides sufficient quality, at least in pharmacy settings. However, a number of issues need to be addressed to ensure quality of service.

Wind Generation Feasibility Study in Bethel, AK

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tom Humphrey, YKHC; Lance Kincaid, EMCOR Energy & Technologies

2004-07-31

This report studies the wind resources in the Yukon-Kuskokwim Health Corporation (YKHC) region, located in southwestern Alaska, and the applicability of wind generation technologies to YKHC facilities.

Situated Learning: The Feasibility of an Experimental Learning of Information Technology for Academic Nursing Students

ERIC Educational Resources Information Center

Gonen, Ayala; Lev-Ari, Lilac; Sharon, Dganit; Amzalag, Meital

2016-01-01

As part of the Bachelor's degree of nursing education, nursing students are exposed to the increasingly complex world of Information Technology. Aim: To evaluate the feasibility of a situated learning approach for Information Technology course by assessing students' perceptions at the end of the course. Methods: Course participants completed a pre…

Solar Thermal Power Systems parabolic dish project

NASA Technical Reports Server (NTRS)

Truscello, V. C.

1981-01-01

The status of the Solar Thermal Power Systems Project for FY 1980 is summarized. Included is: a discussion of the project's goals, program structure, and progress in parabolic dish technology. Analyses and test results of concentrators, receivers, and power converters are discussed. Progress toward the objectives of technology feasibility, technology readiness, system feasibility, and system readiness are covered.

First Person Point of View Augmented Reality for Central Line Insertion Training: A Usability and Feasibility Study

PubMed Central

Rochlen, Lauryn R.; Levine, Robert; Tait, Alan R.

2016-01-01

Introduction The value of simulation in medical education and procedural skills training is well recognized. Despite this, many mannequin-based trainers are limited by the inability of the trainee to view the internal anatomical structures. This study evaluates the usability and feasibility of a 1st person point of view (POV) augmented reality (AR) trainer on needle insertion as a component of central venous catheter (CVC) placement. Methods Forty subjects, including medical students and anesthesiology residents and faculty participated. AR glasses were provided through which the relevant internal anatomical landmarks were projected. Following a practice period, participants were asked to place the needle in the mannequin without the benefit of the AR projected internal anatomy. The ability of the trainees to correctly place the needle was documented. Participants also completed a short survey describing their perceptions of the AR technology. Results Participants reported that the AR technology was realistic (77.5%) and that the ability to view the internal anatomy was helpful (92.5%). Furthermore, 85% and 82.1%, respectively, believed that the AR technology promoted learning and should be incorporated into medical training. The ability to successfully place the needle was similar between experienced and non-experienced participants, however, less experienced participants were more likely to inadvertently puncture the carotid artery. Conclusions Results of this pilot study demonstrated the usability and feasibility of AR technology as a potentially important adjunct to simulated medical skills training. Further development and evaluation of this innovative technology under a variety of simulated medical training settings would be an important next step. PMID:27930431

First-Person Point-of-View-Augmented Reality for Central Line Insertion Training: A Usability and Feasibility Study.

PubMed

Rochlen, Lauryn R; Levine, Robert; Tait, Alan R

2017-02-01

The value of simulation in medical education and procedural skills training is well recognized. Despite this, many mannequin-based trainers are limited by the inability of the trainee to view the internal anatomical structures. This study evaluates the usability and feasibility of a first-person point-of-view-augmented reality (AR) trainer on needle insertion as a component of central venous catheter placement. Forty subjects, including medical students and anesthesiology residents and faculty, participated. Augmented reality glasses were provided through which the relevant internal anatomical landmarks were projected. After a practice period, participants were asked to place the needle in the mannequin without the benefit of the AR-projected internal anatomy. The ability of the trainees to correctly place the needle was documented. Participants also completed a short survey describing their perceptions of the AR technology. Participants reported that the AR technology was realistic (77.5%) and that the ability to view the internal anatomy was helpful (92.5%). Furthermore, 85% and 82.1%, respectively, believed that the AR technology promoted learning and should be incorporated into medical training. The ability to successfully place the needle was similar between experienced and nonexperienced participants; however, less experienced participants were more likely to inadvertently puncture the carotid artery. Results of this pilot study demonstrated the usability and feasibility of AR technology as a potentially important adjunct to simulated medical skills training. Further development and evaluation of this innovative technology under a variety of simulated medical training settings would be an important next step.

Resourcefulness training intervention: a promising approach to improve mental health of mothers with technology-dependent children.

PubMed

Toly, Valerie Boebel; Musil, Carol M; Zauszniewski, Jaclene A

2014-02-01

The population of children dependent on medical technology such as mechanical ventilation, feeding tubes, and supplemental oxygen continues to grow in the United States. These children are frequently cared for by their mothers at home following hospital discharge. Research indicates that these mothers are at high risk for negative mental health outcomes that affect both caregiver and care recipient. The purpose of this randomized controlled pilot trial was to determine the feasibility, acceptability, and efficacy of resourcefulness training (RT), a cognitive-behavioral intervention, among mothers of technology-dependent children. RT was found to be a feasible and acceptable intervention with this population during the 6 week study. The effect size in this pilot study demonstrates initial efficacy and indicates areas for strengthening the intervention protocol. RT is a promising intervention that can be employed by pediatric nurses to assist mothers in the home management of technology-dependent children. Copyright © 2014 Elsevier Inc. All rights reserved.

Advanced technology and future earth-orbit transportation systems

NASA Technical Reports Server (NTRS)

Henry, B. Z.; Eldred, C. H.

1977-01-01

The paper is concerned with the identification and evaluation of technology developments which offer potential for high return on investment when applied to advanced transportation systems. These procedures are applied in a study of winged single-stage-to-orbit (SSTO) vehicles, which are considered feasible by the 1990s. Advanced technology is considered a key element in achieving improved economics, and near term investment in selected technology areas is recommended.

Feasibility and Effectiveness of Using Wearable Activity Trackers in Youth: A Systematic Review

PubMed Central

McNarry, Melitta A; Mackintosh, Kelly A

2016-01-01

Background The proliferation and popularity of wearable activity trackers (eg, Fitbit, Jawbone, Misfit) may present an opportunity to integrate such technology into physical activity interventions. While several systematic reviews have reported intervention effects of using wearable activity trackers on adults’ physical activity levels, none to date have focused specifically on children and adolescents. Objective The aim of this review was to examine the effectiveness of wearable activity trackers as a tool for increasing children’s and adolescents’ physical activity levels. We also examined the feasibility of using such technology in younger populations (age range 5-19 years). Methods We conducted a systematic search of 5 electronic databases, reference lists, and personal archives to identify articles published up until August 2016 that met the inclusion criteria. Articles were included if they (1) specifically examined the use of a wearable device within an intervention or a feasibility study; (2) included participants aged 5-19 years old; (3) had a measure of physical activity as an outcome variable for intervention studies; (4) reported process data concerning the feasibility of the device in feasibility studies; and (5) were published in English. Data were analyzed in August 2016. Results In total, we identified and analyzed 5 studies (3 intervention, 2 feasibility). Intervention delivery ranged from 19 days to 3 months, with only 1 study using a randomized controlled trial design. Wearable activity trackers were typically combined with other intervention approaches such as goal setting and researcher feedback. While intervention effects were generally positive, the reported differences were largely nonsignificant. The feasibility studies indicated that monitor comfort and design and feedback features were important factors to children and adolescents. Conclusions There is a paucity of research concerning the effectiveness and feasibility of wearable activity trackers as a tool for increasing children’s and adolescents’ physical activity levels. While there are some preliminary data to suggest these devices may have the potential to increase activity levels through self-monitoring and goal setting in the short term, more research is needed to establish longer-term effects on behavior. PMID:27881359

Post-Disaster Safety Net: Instituting Leadership, Economic and Technological Arrangements

ERIC Educational Resources Information Center

Akaiso, Darlington

2013-01-01

This dissertation will present the findings of an in-depth study conducted on flood victims in Bangkok, Thailand. The objective of this study is to explore the feasibility of using modern technologies as a post-crisis remediation strategy to reconnect displaced families in the aftermath of a disaster. This will include investigating which modern…

Distributed Practicum Supervision in a Managed Learning Environment (MLE)

ERIC Educational Resources Information Center

Carter, David

2005-01-01

This evaluation-research feasibility study piloted the creation of a technology-mediated managed learning environment (MLE) involving the implementation of one of a new generation of instructionally driven management information systems (IMISs). The system, and supporting information and communications technology (ICT) was employed to support…

Feasibility Study of RFID Technology for Construction Load Tracking

DOT National Transportation Integrated Search

2011-12-31

RFID technology was proven to be successful in tracking dump trucks from loading plant to a paver location on a highway project. The average roundtrip time was 1 hour and 4 minutes. However, 3% of this data has truck delivery times in excess of 2 hou...

Technological Improvements to Automobile Fuel Consumption : Volume 2B. Sections 24 and 25, and Appendixes A through 1

DOT National Transportation Integrated Search

1974-12-01

This report is a preliminary survey of the technological feasibility of reducing the fuel consumption of automobiles. The study uses as a reference information derived from literature, automobile industry contacts, and testing conducted as part of th...

Survey of cogeneration: Advanced cogeneration research study

NASA Technical Reports Server (NTRS)

Slonski, M. L.

1983-01-01

The consumption of electricity, natural gas, or fuel oil was surveyed. The potential electricity that could be generated in the SCE service territory using cogeneration technology was estimated. It was found that an estimated 3700 MWe could potentially be generated in Southern California using cogenerated technology. It is suggested that current technology could provide 2600 MWe and advanced technology could provide 1100 MWe. Approximately 1600 MWt is considered not feasible to produce electricity with either current or advanced cogeneration technology.

Exploring the Feasibility of Information Communication Technologies in the Context of Academic Help Seeking

ERIC Educational Resources Information Center

Linney, Jeffrey S.

2017-01-01

This study sought to investigate whether the popularity of Information Communication Technologies (ICTs) would impact the behavioral intention (BI) to use of these technologies to aid in the task of academic help-seeking (AHS). Out of the ICTs available today, the most popular is text-messaging, especially among a sizable percentage of the college…

A Study: Exploring the Feasibility of Developing a Computer Science Online Degree Program at Tuskegee University

ERIC Educational Resources Information Center

Buckley, Ingrid A.; Narang, Hira

2014-01-01

This paper investigates the feasibility of developing an online degree for a computer science and information technology degree programs. Our motivation is to increase access to quality education with the aim of stimulating growth, attracting new students, and retaining our current student body. A survey was conducted of CS/IT online degrees which…

A Pilot and Feasibility Study of Virtual Reality as a Distraction for Children with Cancer

ERIC Educational Resources Information Center

Gershon, Jonathan; Zimand, Elana; Pickering, Melissa; Rothbaum, Barbara Olasov; Hodges, Larry

2004-01-01

Objective: To pilot and test the feasibility of a novel technology to reduce anxiety and pain associated with an invasive medical procedure in children with cancer. Method: Children with cancer (ages 7-19) whose treatment protocols required access of their subcutaneous venous port device (port access) were randomly assigned to a virtual reality…

Feasibility study of modern airships, phase 2. Volume 2: Airport feeder vehicle

NASA Technical Reports Server (NTRS)

1976-01-01

The Airport Feeder vehicle is a VTOL, semi-buoyant ellipsoidal airship capable of transporting passengers or cargo to major CTOL hub terminals from suburban and downtown depots. Six tasks were reviewed: (1) vehicle design definition, (2) operational procedures analysis, (3) cost analysis, (4) comparison with alternate transportation modes, (5) mission/vehicle feasibility assessment, and (6) technology assessment.

Assessing the feasibility of implementing low-cost virtual reality therapy during routine burn care.

PubMed

Ford, Cameron G; Manegold, Ellen M; Randall, Cameron L; Aballay, Ariel M; Duncan, Christina L

2018-06-01

Burn care often involves procedures that result in significant pain experiences for patients which, in turn, can lead to poorer physical and psychological health outcomes. Distraction and virtual reality (VR) are an effective adjunct to pharmacological interventions in reducing pain. Much of the research that has demonstrated efficacy for VR in burn care has involved expensive and extensive technology. Thus, identifying cost-effective, feasible, acceptable, and effective approaches to apply distraction within routine burn care is important. The objective of this mixed-methods study was to evaluate key stakeholder (i.e., patients, providers) perceptions of feasibility, acceptability, and effectiveness for the use of low-cost VR technology during routine burn care with adult patients. Ten adult patients used VR during burn care dressing changes in an outpatient clinic setting, after which they completed a satisfaction survey and individual qualitative interview. Providers also completed a satisfaction/perception survey after each participant's care. Quantitative and qualitative results from both patient and provider perspectives consistently supported the feasibility and utility of applying low-cost VR technology in this outpatient burn clinic setting. Special considerations (e.g., aspects to consider when choosing an apparatus or application) stemming from stakeholder feedback are discussed. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

TechCare: mobile assessment and therapy for psychosis - an intervention for clients in the Early Intervention Service: A feasibility study protocol.

PubMed

Husain, Nusrat; Gire, Nadeem; Kelly, James; Duxbury, Joy; McKeown, Mick; Riley, Miv; Taylor, Christopher Dj; Taylor, Peter J; Emsley, Richard; Farooq, Saeed; Caton, Neil; Naeem, Farooq; Kingdon, David; Chaudhry, Imran

2016-01-01

Technological advances in healthcare have shown promise when delivering interventions for mental health problems such as psychosis. The aim of this project is to develop a mobile phone intervention for people with psychosis and to conduct a feasibility study of the TechCare App. The TechCare App will assess participant's symptoms and respond with a personalised guided self-help-based psychological intervention with the aim of exploring feasibility and acceptability. The project will recruit 16 service users and 8-10 health professionals from the Lancashire Care NHS Foundation Trust Early Intervention Service. In strand 1 of the study, we will invite people to discuss their experience of psychosis and give their opinions on the existing evidence-based treatment (cognitive behavioural therapy) and how the mobile app can be developed. In strand 2, we will complete a test run with a small number of participants (n = 4) to refine the mobile intervention (TechCare). Finally, in strand 3 of the study, the TechCare App will be examined in a feasibility study with 12 participants. It has been suggested that there is a need for a rapid increase in the efforts to develop the evidence base for the clinical effectiveness of digital technologies, considering mHealth research can potentially be helpful in addressing the demand on mental health services globally.

Mobile Phone and Web 2.0 Technologies for Weight Management: A Systematic Scoping Review.

PubMed

Bardus, Marco; Smith, Jane R; Samaha, Laya; Abraham, Charles

2015-11-16

Widespread diffusion of mobile phone and Web 2.0 technologies make them potentially useful tools for promoting health and tackling public health issues, such as the increasing prevalence of overweight and obesity. Research in this domain is growing rapidly but, to date, no review has comprehensively and systematically documented how mobile and Web 2.0 technologies are being deployed and evaluated in relation to weight management. To provide an up-to-date, comprehensive map of the literature discussing the use of mobile phone and Web 2.0 apps for influencing behaviors related to weight management (ie, diet, physical activity [PA], weight control, etc). A systematic scoping review of the literature was conducted based on a published protocol (registered at CRD42014010323). Using a comprehensive search strategy, we searched 16 multidisciplinary electronic databases for original research documents published in English between 2004 and 2014. We used duplicate study selection and data extraction. Using an inductively developed charting tool, selected articles were thematically categorized. We identified 457 articles, mostly published between 2013 and 2014 in 157 different journals and 89 conference proceedings. Articles were categorized around two overarching themes, which described the use of technologies for either (1) promoting behavior change (309/457, 67.6%) or (2) measuring behavior (103/457, 22.5%). The remaining articles were overviews of apps and social media content (33/457, 7.2%) or covered a combination of these three themes (12/457, 2.6%). Within the two main overarching themes, we categorized articles as representing three phases of research development: (1) design and development, (2) feasibility studies, and (3) evaluations. Overall, articles mostly reported on evaluations of technologies for behavior change (211/457, 46.2%). There is an extensive body of research on mobile phone and Web 2.0 technologies for weight management. Research has reported on (1) the development, feasibility, and efficacy of persuasive mobile technologies used in interventions for behavior change (PA and diet) and (2) the design, feasibility, and accuracy of mobile phone apps for behavioral assessment. Further research has focused exclusively on analyses of the content and quality of available apps. Limited evidence exists on the use of social media for behavior change, but a segment of studies deal with content analyses of social media. Future research should analyze mobile phone and Web 2.0 technologies together by combining the evaluation of content and design aspects with usability, feasibility, and efficacy/effectiveness for behavior change, or accuracy/validity for behavior assessment, in order to understand which technological components and features are likely to result in effective interventions.

A 30/20 GHz FSS feasibility study

NASA Technical Reports Server (NTRS)

1987-01-01

The near term feasibility of direct-to-subscriber services were determined using the 30/20 GHz Fixed Satellite Service (FSS) frequency bands. Those technologies which need to be further developed before such a system can be implemented, were identified. To determine this feasibility, dozens of potential applications were examined for their near-term viability, and the subscriber base of three promising applications were estimated. The system requirements, terminal design, and satellite architecture were all investigated to determine whether a 30/20 GHz FSS system is technically and economically feasible by mid-1990s. It was concluded that such a system is feasible, although maturation of some technologies is needed. This system would likely consist of one or two multibeam satellites serving hub/spoke networks of simple user terminals and more complex, mutli-channel terminals of the service providers. Rain compensation would be accomplished non-adaptively through the use of coding, nonuniform satellite TWT power that is a function of a beam's anticipated downlink fading, and signal regeneration of traffic to the wettest climate regions. It was estimated that a potential market of almost two million users could exist in in the mid-1990s time frame for home banking and financial services via Ka-band satellites.

Solar Electric and Chemical Propulsion Technology Applications to a Titan Orbiter/Lander Mission

NASA Technical Reports Server (NTRS)

Cupples, Michael

2007-01-01

Several advanced propulsion technology options were assessed for a conceptual Titan Orbiter/Lander mission. For convenience of presentation, the mission was broken into two phases: interplanetary and Titan capture. The interplanetary phase of the mission was evaluated for an advanced Solar Electric Propulsion System (SEPS), while the Titan capture phase was evaluated for state-of-art chemical propulsion (NTO/Hydrazine), three advanced chemical propulsion options (LOX/Hydrazine, Fluorine/Hydrazine, high Isp mono-propellant), and advanced tank technologies. Hence, this study was referred to as a SEPS/Chemical based option. The SEPS/Chemical study results were briefly compared to a 2002 NASA study that included two general propulsion options for the same conceptual mission: an all propulsive based mission and a SEPS/Aerocapture based mission. The SEP/Chemical study assumed identical science payload as the 2002 NASA study science payload. The SEPS/Chemical study results indicated that the Titan mission was feasible for a medium launch vehicle, an interplanetary transfer time of approximately 8 years, an advanced SEPS (30 kW), and current chemical engine technology (yet with advanced tanks) for the Titan capture. The 2002 NASA study showed the feasibility of the mission based on a somewhat smaller medium launch vehicle, an interplanetary transfer time of approximately 5.9 years, an advanced SEPS (24 kW), and advanced Aerocapture based propulsion technology for the Titan capture. Further comparisons and study results were presented for the advanced chemical and advanced tank technologies.

Acceptability and feasibility of smartphone-assisted 24 h recalls in the Chinese population.

PubMed

Zang, Jiajie; Song, Jun; Wang, Zhengyuan; Yao, Chunxia; Ma, Jianhong; Huang, Cuihua; Zhu, Zhenni; Smith, Lindsey P; Du, Shufa; Hua, Jenna; Seto, Edmund; Popkin, Barry M; Zou, Shurong

2015-12-01

To examine the acceptability and feasibility of using smartphone technology to assess beverage intake and evaluate whether the feasibility of smartphone use is greater among key sub-populations. An acceptability and feasibility study of recording the video dietary record, the acceptability of the ecological momentary assessment (EMA), wearing smartphones and whether the videos helped participants recall intake after a cross-over validation study. Rural and urban area in Shanghai, China. Healthy adults (n 110) aged 20-40 years old. Most participants reported that the phone was acceptable in most aspects, including that videos were easy to use (70%), helped with recalls (77%), EMA reminders helped them record intake (75%) and apps were easy to understand (85%). However, 49% of the participants reported that they had trouble remembering to take videos of the beverages before consumption or 46% felt embarrassed taking videos in front of others. Moreover, 72% reported that the EMA reminders affected their consumption. When assessing overall acceptability of using smartphones, 72% of the participants were favourable responders. There were no statistically significant differences in overall acceptability for overweight v. normal-weight participants or for rural v. urban residents. However, we did find that the overall acceptability was higher for males (81%) than females (61%, P=0·017). Our study did not find smartphone technology helped with dietary assessments in a Chinese population. However, simpler approaches, such as using photographs instead of videos, may be more feasible for enhancing 24 h dietary recalls.

Telepresence-Enabled Remote Fieldwork: Undergraduate Research in the Deep Sea

ERIC Educational Resources Information Center

Stephens, A. Lynn; Pallant, Amy; McIntyre, Cynthia

2016-01-01

Deep-sea research is rarely available to undergraduate students. However, as telepresence technology becomes more available, doors may open for more undergraduates to pursue research that includes remote fieldwork. This descriptive case study is an initial investigation into whether such technology might provide a feasible opportunity for…

An Evaluation of Videoconferencing as a Supportive Technology for Practicum Supervision

ERIC Educational Resources Information Center

Dymond, Stacy K.; Renzaglia, Adelle; Halle, James W.; Chadsey, Janis; Bentz, Johnell L.

2008-01-01

In this study, the authors determine the efficacy of videoconferencing to supervise pre-service special education teachers. Efficacy is determined by (a) assessing interobserver reliability between on-site and off-site observers and (b) evaluating the feasibility and practicality of the videoconferencing technology. Data are collected in two…

Numerical aerodynamic simulation facility feasibility study, executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability, reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year.

Smartphone Apps for Schizophrenia: A Systematic Review

PubMed Central

2015-01-01

Background There is increasing interest in using mobile technologies such as smartphones for improving the care of patients with schizophrenia. However, less is known about the current clinical evidence for the feasibility and effectiveness of smartphone apps in this population. Objective To review the published literature of smartphone apps applied for the care of patients with schizophrenia and other psychotic disorders. Methods An electronic database search of Ovid MEDLINE, the Cochrane Central Register of Controlled Trials, Health Technology Assessment Database, Allied and Complementary Medicine, Health and Psychosocial Instruments, PsycINFO, and Embase was conducted on May 24, 2015. All eligible studies were systematically reviewed, and proportional meta-analyses were applied to pooled data on recruitment, retention, and adherence to examine the overall feasibility of smartphone interventions for schizophrenia. Results Our search produced 226 results from which 7 eligible articles were identified, reporting on 5 studies of smartphone apps for patients with schizophrenia. All examined feasibility, and one assessed the preliminary efficacy of a smartphone intervention for schizophrenia. Study lengths varied between 6 and 130 days. Overall retention was 92% (95% CI 82-98%). Participants consistently used the smartphone apps on more than 85% of days during the study period, averaging 3.95 interactions per person per day. Furthermore, participants responded to 71.9% of automated prompts (95% CI 65.7-77.8%). Participants reported a range of potential benefits from the various interventions, and user experience was largely positive. Conclusions Although small, the current published literature demonstrates strong evidence for the feasibility of using smartphones to enhance the care of people with schizophrenia. High rates of engagement and satisfaction with a broad range of apps suggest the nascent potential of this mobile technology. However, there remains limited data on the efficacy of such interventions. PMID:26546039

Acceptability and Feasibility of Real-Time Antiretroviral Therapy Adherence Interventions in Rural Uganda: Mixed-Method Pilot Randomized Controlled Trial

PubMed Central

Atukunda, Esther C; Tumuhimbise, Wilson; Pisarski, Emily E; Tam, Melanie; Wyatt, Monique A; Ware, Norma C; Haberer, Jessica E

2018-01-01

Background Wireless electronic adherence monitors can detect antiretroviral therapy (ART) adherence lapses and trigger interventions in real time, thus potentially avoiding unnecessary HIV viremia. Evidence about the acceptability and feasibility of these monitors and associated interventions, however, is limited. Objective The aim of this study was to assess the acceptability and feasibility of real-time adherence monitoring linked to text messaging (short message service, SMS) reminders and notifications to support adherence among individuals living with HIV who are taking ART in rural southwestern Uganda. Methods Individuals living with HIV who were initiating ART were enrolled in a pilot randomized controlled trial and followed up for 9 months. Participants received a real-time adherence monitor and were randomized to one of the following study arms: (1) scheduled SMS, (2) SMS triggered by missed or delayed doses, or (3) no SMS. SMS notifications were also sent to 45 patient-identified social supporters for sustained adherence lapses in the scheduled SMS and triggered SMS arms. Study participants and social supporters participated in qualitative semistructured in-depth interviews on acceptability and feasibility of this technology. An inductive, content analytic approach, framed by the unified theory of acceptance and use of technology model, was used to analyze qualitative data. Quantitative feasibility data, including device functionality and SMS tracking data, were recorded based upon device metrics collected electronically and summarized descriptively. Results A total of 63 participants participated in the study. Participants reported that real-time monitoring intervention linked to SMS reminders and notifications are generally acceptable; the predominant feedback was perceived utility—the intervention was beneficial in motivating and reminding patients to take medication, as well as enabling provision of social support. The intervention was found to be technically feasible, as data were obtained from most participants as expected most of the time. Potential challenges included the impact of the technology on confidentiality, shared phone ownership, usability skills, and availability of electricity. Conclusions Real-time adherence monitoring integrated with SMS reminders and social support notifications is a generally acceptable (based primarily on perceived utility) and feasible intervention in a resource-limited country. Future efforts should focus on optimized device design, user training to overcome the challenges we encountered, cost effectiveness studies, as well as studying the monitoring aspect of the device without accompanying interventions. Trial Registration ClinicalTrials.gov NCT01957865; https://clinicaltrials.gov/ct2/show/NCT01957865 (Archived by WebCite at http://www.webcitation.org/6zFiDlXDa) PMID:29773527

Keep in Touch (KIT): feasibility of using internet-based communication and information technology in palliative care.

PubMed

Guo, Qiaohong; Cann, Beverley; McClement, Susan; Thompson, Genevieve; Chochinov, Harvey Max

2017-05-06

Confinement to an in-patient hospital ward impairs patients' sense of social support and connectedness. Providing the means, through communication technology, for patients to maintain contact with friends and family can potentially improve well-being at the end of life by minimizing social isolation and facilitating social connection. This study aimed to explore the feasibility of introducing internet-based communication and information technologies for in-patients and their families and to describe their experience in using this technology. A cross-sectional survey design was used to describe patient and family member experiences in using internet-based communication technology and health care provider views of using such technology in palliative care. Participants included 13 palliative in-patients, 38 family members, and 14 health care providers. An iPad or a laptop computer with password-protected internet access was loaned to each patient and family member for about two weeks or they used their own electronic devices for the duration of the patient's stay. Quantitative and qualitative data were collected from patients, families, and health care providers to discern how patients and families used the technology, its ease of use and its impact. Descriptive statistics and paired sample t-tests were used to analyze quantitative data; qualitative data were analyzed using constant comparative techniques. Palliative patients and family members used the technology to keep in touch with family and friends, entertain themselves, look up information, or accomplish tasks. Most participants found the technology easy to use and reported that it helped them feel better overall, connected to others and calm. The availability of competent, respectful, and caring technical support personnel was highly valued by patients and families. Health care providers identified that computer technology helped patients and families keep others informed about the patient's condition, enabled sharing of important decisions and facilitated access to the outside world. This study confirmed the feasibility of offering internet-based communication and information technologies on palliative care in-patient units. Patients and families need to be provided appropriate technical support to ensure that the technology is used optimally to help them accomplish their goals.

75 FR 43942 - Children's Products Containing Lead; Technological Feasibility of 100 ppm for Lead Content...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-27

...Section 101(a) of the Consumer Product Safety Improvement Act (``CPSIA'') provides that, as of August 11, 2011, children's products may not contain more than 100 parts per million (``ppm'') of lead, unless the Consumer Product Safety Commission (``CPSC'' or ``Commission''), determines that it is not technologically feasible, after notice and a hearing and after analyzing the public health protections associated with substantially reducing lead in children's products. The reduction can be for a product or product category. This notice requests comment and information on the technological feasibility of meeting the 100 ppm lead content limit for children's products.

Liquid metal magnetohydrodynamics (LMMHD) technology transfer feasibility study. Volume 1: Summary

NASA Technical Reports Server (NTRS)

Phen, R. L.; Hays, L. G.; Alper, M. E.

1973-01-01

The potential application of liquid metal magnetohydrodynamics (LMMHD) to central station utility power generation through the period to 1990 is examined. Included are: (1) a description of LMMHD and a review of its development status, (2) LMMHD preliminary design for application to central station utility power generation, (3) evaluation of LMMHD in comparison with conventional and other advanced power generation systems and (4) a technology development plan. One of the major conclusions found is that the most economic and technically feasible application of LMMHD is a topping cycle to a steam plant, taking advantage of high temperatures available but not usable by the steam cycle.

Remote monitoring technologies for the prevention of metabolic syndrome: the Diabetes and Technology for Increased Activity (DaTA) study.

PubMed

Stuckey, Melanie; Fulkerson, Robyn; Read, Emily; Russell-Minda, Elizabeth; Munoz, Claudio; Kleinstiver, Peter; Petrella, Robert

2011-07-01

Remote monitoring technologies are ideally suited for rural communities with limited access to health care. In an 8-week pilot study, we examined the feasibility of implementing and conducting a technology-intensive intervention in an underserviced rural setting. Our goal was to test the utility of self-monitoring technologies, physical activity, and education as tools to manage health indicators for the development of the cardiovascular complications (CVCs) of type 2 diabetes. The Diabetes and Technology for Increased Activity study was an open single-center study conducted in a community-based research setting. All 24 participants were provided with a Blackberry™ Smartphone, blood pressure monitor, glucometer, and pedometer. Smartphones transmitted measurements and survey results to the database, interfaced participants with the clinical team, and allowed for self-monitoring. Outcomes were improved body composition, improved markers of CVC risk factors, increased daily exercise, and interest in or awareness of lifestyle changes that impact health outcomes. Participants had excellent compliance for measurements, as self-monitoring provided a sense of security that improved from week 4 to week 8. Our team gained substantial insight into the operational requirements of technology-facilitated health care, including redefined hours of service; data reporting, management, and access protocols; and the utility of real-time clinical measures by remote monitoring. We developed an understanding of knowledge translation strategies as well as successful motivational and educational tools. Importantly, remote monitoring technology was found to be feasible and accepted in a rural setting. © 2011 Diabetes Technology Society.

A New Adaptive Home-based Exercise Technology among Older Adults Living in Nursing Home: A Pilot Study on Feasibility, Acceptability and Physical Performance.

PubMed

Valiani, V; Lauzé, M; Martel, D; Pahor, M; Manini, T M; Anton, S; Aubertin-Leheudre, M

2017-01-01

To explore the feasibility and acceptability of a new home-based exercise technology among older adults and to evaluate its efficacy on physical performance measures. Longitudinal clinical trial. Oak Hammock at the University of Florida, a nursing home located in Gainesville, Florida. Twelve pre-disabled older adults (≥75 years) living in a nursing home with a Short Physical Performance Battery (SPPB) score between 6 and 9 and no diagnosis of dementia. Thirty minutes of light intensity exercise (aerobic, strength and balance) two times per week for four weeks using a home-based physical activity technology called Jintronix. Feasibility and acceptability were assessed through a 9-item self-administered questionnaire and by exploring the percentage of quality of movements and time performing exercise which was calculated automatically by Jintronix technology. Physical performance measures were assessed through the SPPB score at baseline, after 4 weeks of intervention and after 3 months from the completion of the intervention. Twelve older adults (80.5±4.2 years old) performed light intensity exercise with Jintronix for a total of 51.9±7.9 minutes per week. Participants reached 87% score of quality of movements in strength and balance exercises, a global appreciation score of 91.7% and a global difficulty score of 36%. Compared to baseline, there was a significant improvement in SPPB score at the end of the intervention and at 3 months following the completion of the exercise program (0.67±0.98 and 1.08±0.99 respectively, p-value <0.05). Jintronix technology is feasible and acceptable among pre-disabled older adults without dementia living in nursing home and is beneficial in improving their physical performance.

Using Augmented Reality in Early Art Education: A Case Study in Hong Kong Kindergarten

ERIC Educational Resources Information Center

Huang, Yujia; Li, Hui; Fong, Ricci

2016-01-01

Innovation in pedagogy by technology integration in kindergarten classroom has always been a challenge for most teachers. This design-based research aimed to explore the feasibility of using Augmented Reality (AR) technology in early art education with a focus on the gains and pains of this innovation. A case study was conducted in a typical…

The Association between Tolerance for Ambiguity and Fear of Negative Evaluation: A Study of Engineering Technology Capstone Courses

ERIC Educational Resources Information Center

Dubikovsky, Sergey I.

2016-01-01

For many students in engineering and engineering technology programs in the US, senior capstone design courses require students to form a team, define a problem, and find a feasible technical solution to address this problem. Students must integrate the knowledge and skills acquired during their studies at the college or university level. These…

Technology Infusion of CodeSonar into the Space Network Ground Segment (RII07)

NASA Technical Reports Server (NTRS)

Benson, Markland

2008-01-01

The NASA Software Assurance Research Program (in part) performs studies as to the feasibility of technologies for improving the safety, quality, reliability, cost, and performance of NASA software. This study considers the application of commercial automated source code analysis tools to mission critical ground software that is in the operations and sustainment portion of the product lifecycle.

Design without Make: A Feasible Direction for American Technology Education

ERIC Educational Resources Information Center

Thompson, Brandon; Varnado, Terri; Matthews, Brian

2010-01-01

This paper describes the second part of a new three-part study of STEM and engineering design research--termed Design-Without-Make--conducted by NC State University in 2009-10 in an NC high school. The hybrid quantitative, qualitative case study is being developed with the purpose of capturing what new technological learning occurs and how the new…

Remedial investigation/feasibility study for the David Witherspoon, Inc., 901 Site, Knoxville, Tennessee: Volume 2, Appendixes

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-10-01

This document contains the appendixes for the remedial investigation and feasibility study for the David Witherspoon, Inc., 901 site in Knoxville, Tennessee. The following topics are covered in the appendixes: (A) David Witherspoon, Inc., 901 Site Historical Data, (B) Fieldwork Plans for the David Witherspoon, Inc., 901 Site, (C) Risk Assessment, (D) Remediation Technology Discussion, (E) Engineering Support Documentation, (F) Applicable or Relevant and Appropriate Requirements, and (G) Cost Estimate Documentation.

Deciding to buy expensive technology. The case of biliary lithotripsy.

PubMed

Weingart, S N

1995-01-01

Acquiring expensive, new medical technology requires an evaluation of the efficacy and effectiveness, safety, profitability, feasibility, and risk of a project in the context of the hospital's social responsibility and institutional strategy. A case study of the decision to bring biliary lithotripsy to Strong Memorial Hospital illustrates how these criteria offer managers a coherent approach to difficult and consequential decisions about acquiring medical technology.

Basewide Groundwater Operable Unit. Groundwater Operable Unit Remedial Investigation/Feasibility Study Report. Volume 3

DTIC Science & Technology

1994-06-01

technologies were organized into five categories: * In Situ Biological Treatment * In Situ Physical/Chemical Treatment * Ex Situ Biological Groundwater...Technology FIGURE 11-3 PRIMARY SCORING SUMMARY EX SITU BIOLOGICAL GROUNDWATER TREATMENT TECHNOLOGIES GROUNDWATER OPERABLE UNIT RIIFS McCLELLAN AIR FORCE... Biological Treatment CometabolicAnaerobic Anaerobic/Aerobic In Situ Physical/Chemical Treatment Sparging/Soil Vapor Extraction Ex Situ Biological

A Feasibility Study of Sustainable Distributed Generation Technologies to Improve the electrical System on the Duck Valley Reservation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herman Atkins, Shoshone-Paiute; Mark Hannifan, New West Technologies

A range of sustainable energy options were assessed for feasibility in addressing chronic electric grid reliability problems at Duck Valley IR. Wind power and building energy efficiency were determined to have the most merit, with the Duck Valley Tribes now well positioned to pursue large scale wind power development for on- and off-reservation sales.

Long-range eye tracking: A feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jayaweera, S.K.; Lu, Shin-yee

1994-08-24

The design considerations for a long-range Purkinje effects based video tracking system using current technology is presented. Past work, current experiments, and future directions are thoroughly discussed, with an emphasis on digital signal processing techniques and obstacles. It has been determined that while a robust, efficient, long-range, and non-invasive eye tracking system will be difficult to develop, such as a project is indeed feasible.

Ten bar probe technical summary. [feasibility of outer planet common atmospheric probe

NASA Technical Reports Server (NTRS)

Ellis, T. R.

1974-01-01

The feasibility of an outer planet common atmospheric probe is studied with emphasis on entry heating rates and improved ephemeris. It is concluded that a common probe design is possible except for Jupiter; the basic technology exists except for Jupiter heat shielding. A Mariner class bus provides for better bus science and probe bus communications than a Pioneer class bus.

The use of remote presence for health care delivery in a northern Inuit community: a feasibility study

PubMed Central

Mendez, Ivar; Jong, Michael; Keays-White, Debra; Turner, Gail

2013-01-01

Objective To evaluate the feasibility of remote presence for improving the health of residents in a remote northern Inuit community. Study design A pilot study assessed patient's, nurse's and physician's satisfaction with and the use of the remote presence technology aiding delivery of health care to a remote community. A preliminary cost analysis of this technology was also performed. Methods This study deployed a remote presence RP-7 robot to the isolated Inuit community of Nain, Newfoundland and Labrador for 15 months. The RP-7 is wirelessly controlled by a laptop computer equipped with audiovisual capability and a joystick to maneuver the robot in real time to aid in the assessing and care of patients from a distant location. Qualitative data on physician's, patient's, caregiver's and staff's satisfaction were collected as well as information on its use and characteristics and the number of air transports required to the referral center and associated costs. Results A total of 252 remote presence sessions occurred during the study period, with 89% of the sessions involving direct patient assessment or monitoring. Air transport was required in only 40% of the cases that would have been otherwise transported normally. Patients and their caregivers, nurses and physicians all expressed a high level of satisfaction with the remote presence technology and deemed it beneficial for improved patient care, workloads and job satisfaction. Conclusions These results show the feasibility of deploying a remote presence robot in a distant northern community and a high degree of satisfaction with the technology. Remote presence in the Canadian North has potential for delivering a cost-effective health care solution to underserviced communities reducing the need for the transport of patients and caregivers to distant referral centers. PMID:23984292

Interactions of technology and society: Impacts of improved airtransport. A study of airports at the grass roots. [in rural communities

NASA Technical Reports Server (NTRS)

Laporte, T.; Rosenthal, S.; Ross, S.; Lee, K. N.; Levine, E.

1977-01-01

The feasibility of applying a particular conception of technology and social change to specific examples of technological development was investigated. The social and economic effects of improved airport capabilities on rural communities were examined. Factors which led to the successful implementation of a plan to construct sixty small airports in Ohio are explored and implications derived for forming public policies, evaluating air transportation development, and assessing technology.

Microalgae: a robust "green bio-bridge" between energy and environment.

PubMed

Chen, Yimin; Xu, Changan; Vaidyanathan, Seetharaman

2018-05-01

Microalgae are a potential candidate for biofuel production and environmental treatment because of their specific characteristics (e.g. fast growth, carbon neutral, and rich lipid accumulations). However, several primary bottlenecks still exist in current technologies, including low biomass conversion efficiency, bio-invasion from the external environment, limited or costly nutrient sources, and high energy and capital input for harvest, and stalling its industrial progression. Coupling biofuel production with environmental treatment renders microalgae a more feasible feedstock. This review focuses on microalgae biotechnologies for both bioenergy generation and environmental treatment (e.g. CO 2 sequestration and wastewater reclamation). Different intelligent technologies have been developed, especially during the last decade, to eliminate the bottlenecks, including mixotrophic/heterotrophic cultivation, immobilization, and co-cultivation. It has been realized that any single purpose for the cultivation of microalgae is not an economically feasible option. Combinations of applications in biorefineries are gradually reckoned to be necessary as it provides more economically feasible and environmentally sustainable operations. This presents microalgae as a special niche occupier linking the fields of energy and environmental sciences and technologies. The integrated application of microalgae is also proven by most of the life-cycle analysis studies. This study summarizes the latest development of primary microalgal biotechnologies in the two areas that will bring researchers a comprehensive view towards industrialization with an economic perspective.

Protocol of a Pilot Study of Technology-Enabled Coproduction in Pediatric Chronic Illness Care

PubMed Central

Thakkar, Sunny Narendra; Burns, Lisa; Chini, Barbara; Dykes, Dana MH; McPhail, Gary L; Moore, Erin; Saeed, Shehzad Ahmed; Eslick, Ian; Margolis, Peter A

2017-01-01

Background Pediatric chronic illness care models are traditionally organized around acute episodes of care and may not meet the needs of patients and their families. Interventions that extend the patient-clinician interaction beyond the health care visit, allow for asynchronous and bidirectional feedback loops that span visits and daily life, and facilitate seamless sharing of information are needed to support a care delivery system that is more collaborative, continuous, and data-driven. Orchestra is a mobile health technology platform and intervention designed to transform the management of chronic diseases by optimizing patient-clinician coproduction of care. Objective The aim of this study is to assess the feasibility, acceptability, and preliminary impact of the Orchestra technology and intervention in the context of pediatric chronic illness care. Methods This study will be conducted in the cystic fibrosis and inflammatory bowel disease clinics at Cincinnati Children’s Hospital Medical Center. We will enroll interested patients and their caregivers to work with clinicians to use the Orchestra technology platform and care model over a 6-month period. In parallel, we will use quality improvement methods to improve processes for integrating Orchestra into clinic workflows and patient/family lifestyles. We will use surveys, interviews, technology use data, and measures of clinical outcomes to assess the feasibility, acceptability, and preliminary impact of Orchestra. Outcome measures will include assessments of: (1) enrollment and dropout rates; (2) duration of engagement/sustained use; (3) symptom and patient-reported outcome tracker completion rates; (4) perceived impact on treatment plan, communication with the clinical team, visit preparation, and overall care; (5) changes in disease self-efficacy and engagement in care; and (6) clinical outcomes and health care utilization. Results Participant recruitment began in mid-2015, with results expected in 2017. Conclusions Chronic disease management needs a dramatic transformation to support more collaborative, effective, and patient-centered care. This study is unique in that it is testing not only the impact of technology, but also the necessary processes that facilitate patient and clinician collaboration. This pilot study is designed to examine how technology-enabled coproduction can be implemented in real-life clinical contexts. Once the Orchestra technology and intervention are optimized to ensure feasibility and acceptability, future studies can test the effectiveness of this approach to improve patient outcomes and health care value. PMID:28455274

Design Implications of Real-Time Feedback in Continuous Combinatorial Auctions: An Experimental Investigation

ERIC Educational Resources Information Center

Sanyal, Pallab

2009-01-01

Information Technology (IT) has spawned the growth of novel and innovative market mechanisms (such as online auctions) and associated businesses (such as eBay and Priceline) that were not feasible without the capabilities and reach of these modern information technologies. Previous studies on designing trading mechanisms for online markets…

The Utility of Using Immersive Virtual Environments for the Assessment of Science Inquiry Learning

ERIC Educational Resources Information Center

Code, Jillianne; Clarke-Midura, Jody; Zap, Nick; Dede, Chris

2013-01-01

Determining the effectiveness of any educational technology depends upon teachers' and learners' perception of the functional utility of that tool for teaching, learning, and assessment. The Virtual Performance project at Harvard University is developing and studying the feasibility of using immersive technology to develop performance…

An improved radiofrequency method to pasteurize salmonella in shell eggs

USDA-ARS?s Scientific Manuscript database

The goals of this study were to improve radio frequency (RF) shell egg pasteurization technology to make it more commercially feasible, to evaluate its efficacy in reducing Salmonella, and to determine its effect on the quality changes of the egg. The original RF technology inactivated 6.8 log of E....

High Energy Laser Technology Assessment: Volume 1. The Technology Assessment: An Initial Study

DTIC Science & Technology

1975-01-01

technically feasible and economically cost effective Such an analysis is beyord the capability of this exploratory study Therefore, to proceed with... Analysis R&D Management fffft jygJfQ JQ Q^^ 20 ABSTRACT fConllnu* im r«»«ra« •!«#• II ifcmmnmrr mt4 Idtmllty hf Heck A technology assessment ha...by an abreviated impact analysis whose intent is to be illustrative of the methodology, rather than be a comprehensive treatment of the subject. 00

Remote Monitoring Technologies for the Prevention of Metabolic Syndrome: The Diabetes and Technology for Increased Activity (DaTA) Study

PubMed Central

Stuckey, Melanie; Fulkerson, Robyn; Read, Emily; Russell-Minda, Elizabeth; Munoz, Claudio; Kleinstiver, Peter; Petrella, Robert

2011-01-01

Objectives Remote monitoring technologies are ideally suited for rural communities with limited access to health care. In an 8-week pilot study, we examined the feasibility of implementing and conducting a technology-intensive intervention in an underserviced rural setting. Our goal was to test the utility of self-monitoring technologies, physical activity, and education as tools to manage health indicators for the development of the cardiovascular complications (CVCs) of type 2 diabetes. Research Design and Methods The Diabetes and Technology for Increased Activity study was an open single-center study conducted in a community-based research setting. All 24 participants were provided with a Blackberry™ Smartphone, blood pressure monitor, glucometer, and pedometer. Smartphones transmitted measurements and survey results to the database, interfaced participants with the clinical team, and allowed for self-monitoring. Results Outcomes were improved body composition, improved markers of CVC risk factors, increased daily exercise, and interest in or awareness of lifestyle changes that impact health outcomes. Participants had excellent compliance for measurements, as self-monitoring provided a sense of security that improved from week 4 to week 8. Conclusions Our team gained substantial insight into the operational requirements of technology-facilitated health care, including redefined hours of service; data reporting, management, and access protocols; and the utility of real-time clinical measures by remote monitoring. We developed an understanding of knowledge translation strategies as well as successful motivational and educational tools. Importantly, remote monitoring technology was found to be feasible and accepted in a rural setting. PMID:21880237

Feasibility of modified remotely monitored in-home gaming technology for improving hand function in adolescents with cerebral palsy.

PubMed

Huber, Meghan; Rabin, Bryan; Docan, Ciprian; Burdea, Grigore C; AbdelBaky, Moustafa; Golomb, Meredith R

2010-03-01

The convergence of game technology, the Internet, and rehabilitation science forms the second-generation virtual rehabilitation framework. This paper presents the first pilot study designed to look at the feasibility of at-home use of gaming technology adapted to address hand impairments in adolescents with hemiplegia due to perinatal stroke or intraventricular hemorrhage. Three participants trained at home for approximately 30 min/day, several days a week, for six to ten months. During therapy, they wore a fifths dimension technologies ultra sensing glove and played custom-developed Java 3D games on a modified PlayStation 3. The games were designed to accommodate the participants' limited range of motion, and to improve finger range and speed of motion. Trials took place in Indiana, while monitoFring/data storage took place at Rutgers Tele-Rehabilitation Institute (New Jersey). Significant improvements in finger range of motion (as measured by the sensing glove) were associated with self- and family-reported improvements in activities of daily living. In online subjective evaluations, participants indicated that they liked the system ease of use, clarity of instructions, and appropriate length of exercising. Other telerehabilitation studies are compared to this study and its technology challenges. Directions for future research are included.

A Mobile Health Platform for Clinical Monitoring in Early Psychosis: Implementation in Community-Based Outpatient Early Psychosis Care

PubMed Central

Iosif, Ana-Maria; Zakskorn, Lauren N; Nye, Kathleen E; Zia, Aqsa; Niendam, Tara Ann

2018-01-01

Background A growing body of literature indicates that smartphone technology is a feasible add-on tool in the treatment of individuals with early psychosis (EP) . However, most studies to date have been conducted independent of outpatient care or in a research clinic setting, often with financial incentives to maintain user adherence to the technology. Feasibility of dissemination and implementation of smartphone technology into community mental health centers (CMHCs) has yet to be tested, and whether young adults with EP will use this technology for long periods of time without incentive is unknown. Furthermore, although EP individuals willingly adopt smartphone technology as part of their treatment, it remains unclear whether providers are amenable to integrating smartphone technology into treatment protocols. Objective This study aimed to establish the feasibility of implementing a smartphone app and affiliated Web-based dashboard in 4 community outpatient EP clinics in Northern California. Methods EP individuals in 4 clinics downloaded an app on their smartphone and responded to daily surveys regarding mood and symptoms for up to 5 months. Treatment providers at the affiliated clinics viewed survey responses on a secure Web-based dashboard in sessions with their clients and between appointments. EP clients and treatment providers filled out satisfaction surveys at study end regarding usability of the app. Results Sixty-one EP clients and 20 treatment providers enrolled in the study for up to 5 months. Forty-one EP clients completed the study, and all treatment providers remained in the study for their duration in the clinic. Survey completion for all 61 EP clients was moderate: 40% and 39% for daily and weekly surveys, respectively. Completion rates were slightly higher in the participants who completed the study: 44% and 41% for daily and weekly surveys, respectively. Twenty-seven of 41 (66%) EP clients who completed the study and 11 of 13 (85%) treatment providers who responded to satisfaction surveys reported they would continue to use the app as part of treatment services. Six (15%; 6/41) clients and 3 providers (23%; 3/13) stated that technological glitches impeded their engagement with the platform. Conclusions EP clients and treatment providers in community-based outpatient clinics are responsive to integrating smartphone technology into treatment services. There were logistical and technical challenges associated with enrolling individuals in CMHCs. To be most effective, implementing smartphone technology in CMHC EP care necessitates adequate technical staff and support for utilization of the platform. PMID:29487044

Feasibility of Behavioral Weight Loss Treatment Enhanced with Peer Support and Mobile Health Technology for Individuals with Serious Mental Illness

PubMed Central

Aschbrenner, Kelly A.; Naslund, John A.; Shevenell, Megan; Mueser, Kim T.; Bartels, Stephen J.

2016-01-01

Objective Effective and scalable lifestyle interventions are needed to address high rates of obesity in people with serious mental illness (SMI). This pilot study evaluated the feasibility of a behavioral weight loss intervention enhanced with peer support and mobile health (mHealth) technology for obese individuals with SMI. Methods The Diabetes Prevention Program Group Lifestyle Balance intervention enhanced with peer support and mHealth technology was implemented in a public mental health setting. Thirteen obese individuals with SMI participated in a pre-post pilot study of the 24-week intervention. Feasibility was assessed by program attendance, and participant satisfaction and suggestions for improving the model. Descriptive changes in weight and fitness were also explored. Results Overall attendance amounted to approximately half (56%) of weekly sessions. At 6-month follow-up, 45% of participants had lost weight, and 45% showed improved fitness by increasing their walking distance. Participants suggested a number of modifications to increase the relevance of the intervention for people with SMI, including less didactic instruction and more active learning, a simplified dietary component, more in depth technology training, and greater attention to mental health. Conclusions The principles of standard behavioral weight loss treatment provide a useful starting point for promoting weight loss in people with SMI. However, adaptions to standard weight loss curricula are needed to enhance engagement, participation, and outcomes to respond to the unique challenges of individuals with SMI. PMID:26462674

The feasibility and concurrent validity of performing the Movement Assessment Battery for Children - 2nd Edition via telerehabilitation technology.

PubMed

Nicola, Kristy; Waugh, Jemimah; Charles, Emily; Russell, Trevor

2018-06-01

In rural and remote communities children with motor difficulties have less access to rehabilitation services. Telerehabilitation technology is a potential method to overcome barriers restricting access to healthcare in these areas. Assessment is necessary to guide clinical reasoning; however it is unclear which paediatric assessments can be administered remotely. The Movement Assessment Battery for Children - 2nd Edition is commonly used by various health professionals to assess motor performance of children. The aim of this study was to investigate the feasibility and concurrent validity of performing the Movement Assessment Battery for Children - 2nd Edition remotely via telerehabilitation technology compared to the conventional in-person method. Fifty-nine children enrolled in a state school (5-11 years old) volunteered to perform one in-person and one telerehabilitation mediated assessment. The order of the method of delivery and the therapist performing the assessment were randomized. After both assessments were complete, a participant satisfaction questionnaire was completed by each child. The Bland-Altman limits of agreement for the total test standard score were -3.15 to 3.22 which is smaller than a pre-determined clinically acceptable margin based on the smallest detectable change. This study establishes the feasibility and concurrent validity of the administration of the Movement Assessment Battery for Children - 2nd Edition via telerehabilitation technology. Overall, participants perceived their experience with telerehabilitation positively. Copyright © 2018 Elsevier Ltd. All rights reserved.

Feasibility of Behavioral Weight Loss Treatment Enhanced with Peer Support and Mobile Health Technology for Individuals with Serious Mental Illness.

PubMed

Aschbrenner, Kelly A; Naslund, John A; Shevenell, Megan; Mueser, Kim T; Bartels, Stephen J

2016-09-01

Effective and scalable lifestyle interventions are needed to address high rates of obesity in people with serious mental illness (SMI). This pilot study evaluated the feasibility of a behavioral weight loss intervention enhanced with peer support and mobile health (mHealth) technology for obese individuals with SMI. The Diabetes Prevention Program Group Lifestyle Balance intervention enhanced with peer support and mHealth technology was implemented in a community mental health setting. Thirteen obese individuals with SMI participated in a pre-post pilot study of the 24-week intervention. Feasibility was assessed by program attendance, and participant satisfaction and suggestions for improving the model. Descriptive changes in weight and fitness were also explored. Overall attendance amounted to approximately half (56 %) of weekly sessions. At 6-month follow-up, 45 % of participants had lost weight, and 45 % showed improved fitness by increasing their walking distance. Participants suggested a number of modifications to increase the relevance of the intervention for people with SMI, including less didactic instruction and more active learning, a simplified dietary component, more in depth technology training, and greater attention to mental health. The principles of standard behavioral weight loss treatment provide a useful starting point for promoting weight loss in people with SMI. However, adaptions to standard weight loss curricula are needed to enhance engagement, participation, and outcomes to respond to the unique challenges of individuals with SMI.

Feasibility study analysis for multi-function dual energy oven (case study: tapioca crackers small medium enterprise)

NASA Astrophysics Data System (ADS)

Soraya, N. W.; El Hadi, R. M.; Chumaidiyah, E.; Tripiawan, W.

2017-12-01

Conventional drying process is constrained by weather (cloudy / rainy), and requires wide drying area, and provides low-quality product. Multi-function dual energy oven is the appropriate technology to solve these problems. The oven uses solar thermal or gas heat for drying various type of products, including tapioca crackers. Investment analysis in technical, operational, and financial aspects show that the multi-function dual energy oven is feasible to be implemented for small medium enterprise (SME) processing tapioca crackers.

Implementing 360° Quantified Self for childhood obesity: feasibility study and experiences from a weight loss camp in Qatar.

PubMed

Fernandez-Luque, Luis; Singh, Meghna; Ofli, Ferda; Mejova, Yelena A; Weber, Ingmar; Aupetit, Michael; Jreige, Sahar Karim; Elmagarmid, Ahmed; Srivastava, Jaideep; Ahmedna, Mohamed

2017-04-13

The explosion of consumer electronics and social media are facilitating the rise of the Quantified Self (QS) movement where millions of users are tracking various aspects of their daily life using social media, mobile technology, and wearable devices. Data from mobile phones, wearables and social media can facilitate a better understanding of the health behaviors of individuals. At the same time, there is an unprecedented increase in childhood obesity rates worldwide. This is a cause for grave concern due to its potential long-term health consequences (e.g., diabetes or cardiovascular diseases). Childhood obesity is highly prevalent in Qatar and the Gulf Region. In this study we examine the feasibility of capturing quantified-self data from social media, wearables and mobiles within a weight lost camp for overweight children in Qatar. Over 50 children (9-12 years old) and parents used a wide range of technologies, including wearable sensors (actigraphy), mobile and social media (WhatsApp and Instagram) to collect data related to physical activity and food, that was then integrated with physiological data to gain insights about their health habits. In this paper, we report about the acquired data and visualization techniques following the 360° Quantified Self (360QS) methodology (Haddadi et al., ICHI 587-92, 2015). 360QS allows for capturing insights on the behavioral patterns of children and serves as a mechanism to reinforce education of their mothers via social media. We also identified human factors, such as gender and cultural acceptability aspects that can affect the implementation of this technology beyond a feasibility study. Furthermore, technical challenges regarding the visualization and integration of heterogeneous and sparse data sets are described in the paper. We proved the feasibility of using 360QS in childhood obesity through this pilot study. However, in order to fully implement the 360QS technology careful planning and integration in the health professionals' workflow is needed. The trial where this study took place is registered at ClinicalTrials.gov on 14 November 2016 ( NCT02972164 ).

Numerical aerodynamic simulation facility feasibility study

NASA Technical Reports Server (NTRS)

1979-01-01

There were three major issues examined in the feasibility study. First, the ability of the proposed system architecture to support the anticipated workload was evaluated. Second, the throughput of the computational engine (the flow model processor) was studied using real application programs. Third, the availability reliability, and maintainability of the system were modeled. The evaluations were based on the baseline systems. The results show that the implementation of the Numerical Aerodynamic Simulation Facility, in the form considered, would indeed be a feasible project with an acceptable level of risk. The technology required (both hardware and software) either already exists or, in the case of a few parts, is expected to be announced this year. Facets of the work described include the hardware configuration, software, user language, and fault tolerance.

Mobile Purposive-Extensive-Podcast-Listening versus Mobile Self-Regulated-Podcast-Development: A Critical Framework for Designing Foreign Language Listening

ERIC Educational Resources Information Center

Sendag, Serkan; Caner, Mustafa; Kafes, Hüseyin

2014-01-01

Nowadays mobile technologies are widely employed in almost all fields of education for varying reasons. The present study intends to explore the role of mobile technologies in the development of students' listening skills in a higher education context. The aim of the present study is twofold; while it seeks for the feasibility of mobile…

Requirements and feasibility study of flight demonstration of Active Controls Technology (ACT) on the NASA 515 airplane

NASA Technical Reports Server (NTRS)

Gordon, C. K.

1975-01-01

A preliminary design study was conducted to evaluate the suitability of the NASA 515 airplane as a flight demonstration vehicle, and to develop plans, schedules, and budget costs for fly-by-wire/active controls technology flight validation in the NASA 515 airplane. The preliminary design and planning were accomplished for two phases of flight validation.

Design of a large magnetic-bearing turbomolecular pump for NET

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bernhardt, K.H.; Conrad, A.; Dinner, P.J.

1988-09-01

The feasibility of development of large vacuum components for operation in fusion machines have been investigated in the framework of the European Fusion Technology Programme. The requirements and the results of the feasibility study for the large turbomolecular pump units (TMP) are presented. Design parameters for single flow 50.000 l/s TMP and a double flow 15.000 and a 50.000 l/s TMP have been compared.

Digital health technology for use in patients with serious mental illness: a systematic review of the literature.

PubMed

Batra, Sonal; Baker, Ross A; Wang, Tao; Forma, Felicia; DiBiasi, Faith; Peters-Strickland, Timothy

2017-01-01

As the capabilities and reach of technology have expanded, there is an accompanying proliferation of digital technologies developed for use in the care of patients with mental illness. The objective of this review was to systematically search published literature to identify currently available health technologies and their intended uses for patients with serious mental illness. The Medline, Embase, and BIOSIS Previews electronic databases were searched to identify peer-reviewed English language articles that reported the use of digital, mobile, and other advanced technology in patients with schizophrenia/schizoaffective disorder, bipolar disorder, and major depressive disorder. Eligible studies were systematically reviewed based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Eighteen studies that met the inclusion criteria were identified. Digital health technologies (DHTs) assessed in the selected studies included mobile applications (apps), digital medicine, digital personal health records, and an electronic pill container. Smartphone apps accounted for the largest share of DHTs. The intended uses of DHTs could be broadly classified as monitoring to gain a better understanding of illness, clinical assessment, and intervention. Overall, studies indicated high usability/feasibility and efficacy/effectiveness, with several reporting validity against established clinical scales. Users were generally engaged with the DHT, and mobile assessments were deemed helpful in monitoring disease symptoms. Rapidly proliferating digital technologies seem to be feasible for short-term use in patients with serious mental illness; nevertheless, long-term effectiveness data from naturalistic studies will help demonstrate their usefulness and facilitate their adoption and integration into the mental health-care system.

Digital health technology for use in patients with serious mental illness: a systematic review of the literature

PubMed Central

Batra, Sonal; Baker, Ross A; Wang, Tao; Forma, Felicia; DiBiasi, Faith; Peters-Strickland, Timothy

2017-01-01

Background As the capabilities and reach of technology have expanded, there is an accompanying proliferation of digital technologies developed for use in the care of patients with mental illness. The objective of this review was to systematically search published literature to identify currently available health technologies and their intended uses for patients with serious mental illness. Materials and methods The Medline, Embase, and BIOSIS Previews electronic databases were searched to identify peer-reviewed English language articles that reported the use of digital, mobile, and other advanced technology in patients with schizophrenia/schizoaffective disorder, bipolar disorder, and major depressive disorder. Eligible studies were systematically reviewed based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. Results Eighteen studies that met the inclusion criteria were identified. Digital health technologies (DHTs) assessed in the selected studies included mobile applications (apps), digital medicine, digital personal health records, and an electronic pill container. Smartphone apps accounted for the largest share of DHTs. The intended uses of DHTs could be broadly classified as monitoring to gain a better understanding of illness, clinical assessment, and intervention. Overall, studies indicated high usability/feasibility and efficacy/effectiveness, with several reporting validity against established clinical scales. Users were generally engaged with the DHT, and mobile assessments were deemed helpful in monitoring disease symptoms. Conclusion Rapidly proliferating digital technologies seem to be feasible for short-term use in patients with serious mental illness; nevertheless, long-term effectiveness data from naturalistic studies will help demonstrate their usefulness and facilitate their adoption and integration into the mental health-care system. PMID:29042823

A preliminary study of solar powdered aircraft and associated power trains

NASA Technical Reports Server (NTRS)

Hall, D. W.; Fortenbach, C. D.; Dimiceli, E. V.; Parks, R. W.

1983-01-01

The feasibility of regeneratively powered solar high altitude powered platform (HAPP) remotely piloted vehicles was assessed. Those technologies which must be pursued to make long duration solar HAPPs feasible are recommended. A methodology which involved characterization and parametric analysis of roughly two dozen variables to determine vehicles capable of fulfilling the primary mission are defined. One of these vehicles was then conceptually designed. Variations of each major design parameter were investigated along with state-of-the-art changes in power train component capabilities. The midlatitude mission studied would be attainable by a solar HAPP if fuel cell, electrolyzer and photovoltaic technologies are pursued. Vehicles will be very large and have very lightweight structures in order to attain the combinations of altitude and duration required by the primary mission.

President's Task Force on Communications Policy. Domestic Applications of Communication Satellite Technology. Staff Paper Four.

ERIC Educational Resources Information Center

President's Task Force on Communications Policy, Washington, DC.

A staff paper to the President's Task Force on Communications Policy examines the feasibility of a domestic communications satellite system. Although, with expected technological advancement, satellites may play a significant role in domestic transmission and are economically feasible right now, a number of remaining questions make the…

Near-term feasibility of alternative jet fuels

DOT National Transportation Integrated Search

2009-01-01

This technical report documents the results of a joint study by the Massachusetts Institute of Technology (MIT) and the RAND Corporation on alternative fuels for commercial aviation. The study compared potential alternative jet fuels on the basis of ...

The use of remote presence for health care delivery in a northern Inuit community: a feasibility study.

PubMed

Mendez, Ivar; Jong, Michael; Keays-White, Debra; Turner, Gail

2013-01-01

To evaluate the feasibility of remote presence for improving the health of residents in a remote northern Inuit community. A pilot study assessed patient's, nurse's and physician's satisfaction with and the use of the remote presence technology aiding delivery of health care to a remote community. A preliminary cost analysis of this technology was also performed. This study deployed a remote presence RP-7 robot to the isolated Inuit community of Nain, Newfoundland and Labrador for 15 months. The RP-7 is wirelessly controlled by a laptop computer equipped with audiovisual capability and a joystick to maneuver the robot in real time to aid in the assessing and care of patients from a distant location. Qualitative data on physician's, patient's, caregiver's and staff's satisfaction were collected as well as information on its use and characteristics and the number of air transports required to the referral center and associated costs. A total of 252 remote presence sessions occurred during the study period, with 89% of the sessions involving direct patient assessment or monitoring. Air transport was required in only 40% of the cases that would have been otherwise transported normally. Patients and their caregivers, nurses and physicians all expressed a high level of satisfaction with the remote presence technology and deemed it beneficial for improved patient care, workloads and job satisfaction. These results show the feasibility of deploying a remote presence robot in a distant northern community and a high degree of satisfaction with the technology. Remote presence in the Canadian North has potential for delivering a cost-effective health care solution to underserviced communities reducing the need for the transport of patients and caregivers to distant referral centers.

Fluidized bed combustor 50 MW thermal power plant, Krabi, Thailand. Feasibility study. Export trade information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The report presents the results of a study prepared by Burns and Roe for the Electricity Generating Authority of Thailand to examine the technical feasibility and economic attractiveness for building a 50 MW Atmospheric Fluidized Bed Combustion lignite fired power plant at Krabi, southern Thailand. The study is divided into seven main sections, plus an executive summary and appendices: (1) Introduction; (2) Atmospheric Fluidized Bed Combustion Technology Overview; (3) Fuel and Limestone Tests; (4) Site Evaluation; (5) Station Design and Arrangements; (6) Environmental Considerations; (7) Economic Analysis.

7 CFR 4279.261 - Application for loan guarantee content.

Code of Federal Regulations, 2012 CFR

2012-01-01

... project; (2) The viability of such technology for the particular project application; (3) The development... location, size, etc.). Economic feasibility determination. Market feasibility determination. Technical.... Recommendations for implementation. (B) Economic Feasibility: Information regarding project site; Availability of...

Mobile Phone and Web 2.0 Technologies for Weight Management: A Systematic Scoping Review

PubMed Central

2015-01-01

Background Widespread diffusion of mobile phone and Web 2.0 technologies make them potentially useful tools for promoting health and tackling public health issues, such as the increasing prevalence of overweight and obesity. Research in this domain is growing rapidly but, to date, no review has comprehensively and systematically documented how mobile and Web 2.0 technologies are being deployed and evaluated in relation to weight management. Objective To provide an up-to-date, comprehensive map of the literature discussing the use of mobile phone and Web 2.0 apps for influencing behaviors related to weight management (ie, diet, physical activity [PA], weight control, etc). Methods A systematic scoping review of the literature was conducted based on a published protocol (registered at PROSPERO: CRD42014010323). Using a comprehensive search strategy, we searched 16 multidisciplinary electronic databases for original research documents published in English between 2004 and 2014. We used duplicate study selection and data extraction. Using an inductively developed charting tool, selected articles were thematically categorized. Results We identified 457 articles, mostly published between 2013 and 2014 in 157 different journals and 89 conference proceedings. Articles were categorized around two overarching themes, which described the use of technologies for either (1) promoting behavior change (309/457, 67.6%) or (2) measuring behavior (103/457, 22.5%). The remaining articles were overviews of apps and social media content (33/457, 7.2%) or covered a combination of these three themes (12/457, 2.6%). Within the two main overarching themes, we categorized articles as representing three phases of research development: (1) design and development, (2) feasibility studies, and (3) evaluations. Overall, articles mostly reported on evaluations of technologies for behavior change (211/457, 46.2%). Conclusions There is an extensive body of research on mobile phone and Web 2.0 technologies for weight management. Research has reported on (1) the development, feasibility, and efficacy of persuasive mobile technologies used in interventions for behavior change (PA and diet) and (2) the design, feasibility, and accuracy of mobile phone apps for behavioral assessment. Further research has focused exclusively on analyses of the content and quality of available apps. Limited evidence exists on the use of social media for behavior change, but a segment of studies deal with content analyses of social media. Future research should analyze mobile phone and Web 2.0 technologies together by combining the evaluation of content and design aspects with usability, feasibility, and efficacy/effectiveness for behavior change, or accuracy/validity for behavior assessment, in order to understand which technological components and features are likely to result in effective interventions. PMID:26573984

Journaling as reinforcement for the resourcefulness training intervention in mothers of technology-dependent children.

PubMed

Toly, Valerie Boebel; Blanchette, Julia E; Musil, Carol M; Zauszniewski, Jaclene A

2016-11-01

Resourcefulness, a set of cognitive and behavioral skills used to attain, maintain, or regain health, is a factor related to depressive symptoms in mothers of children with chronic conditions and complex care needs who are dependent on medical technology such as mechanical ventilation or feeding tubes. The purpose of this secondary analysis of a randomized, controlled pilot intervention study was to determine the feasibility, acceptability and fidelity of daily journal writing as a method of reinforcement of resourcefulness training (RT) that teaches the use of social and personal resourcefulness skills. Participants returned their journals to the study office at the end of the four-week journaling exercise. Content analysis from exit interviews and journals supported the feasibility, acceptability and fidelity of daily journaling for reinforcement of RT in this population. Journal writing can be used by pediatric nurses to reinforce and promote resourcefulness skill use in parents of technology-dependent children. Copyright © 2016 Elsevier Inc. All rights reserved.

THE NEED TO ESTABLISH A MARINE SCIENCES TECHNOLOGY PROGRAM AT SHORELINE COMMUNITY COLLEGE.

ERIC Educational Resources Information Center

TEEL, WARD; AND OTHERS

DURING THE SUMMER OF 1966, FACULTY MEMBERS OF THE COLLEGE CONDUCTED AN INTERVIEW SURVEY TO DETERMINE THE FEASIBILITY OF ESTABLISHING A MARINE SCIENCE TECHNOLOGY PROGRAM. MANPOWER NEEDS OF 70 INDUSTRIES, INSTITUTIONS, AND GOVERNMENTAL AGENCIES CONCERNED WITH THE FIELDS OF OCEANOGRAPHY AND MARINE BIOLOGY WERE STUDIED IN TERMS OF JOBS PERFORMED BY…

Reducing lumber thickness variation using real-time statistical process control

Treesearch

Thomas M. Young; Brian H. Bond; Jan Wiedenbeck

2002-01-01

A technology feasibility study for reducing lumber thickness variation was conducted from April 2001 until March 2002 at two sawmills located in the southern U.S. A real-time statistical process control (SPC) system was developed that featured Wonderware human machine interface technology (HMI) with distributed real-time control charts for all sawing centers and...

Innovation Study for Laser Cutting of Complex Geometries with Paper Materials

NASA Astrophysics Data System (ADS)

Happonen, A.; Stepanov, A.; Piili, H.; Salminen, A.

Even though technology for laser cutting of paper materials has existed for over 30 years, it seems that results of applications of this technology and possibilities of laser cutting systems are not easily available. The aim of this study was to analyze the feasibility of the complex geometry laser cutting of paper materials and to analyze the innovation challenges and potential of current laser cutting technologies offer. This research studied the potential and possible challenges in applying CO2 laser cutting technology for cutting of paper materials in current supply chains trying to fulfil the changing needs of customer in respect of shape, fast response during rapid delivery cycle. The study is focused on examining and analyzing the different possibilities of laser cutting of paper material in application area of complex low volume geometry cutting. The goal of this case was to analyze the feasibility of the laser cutting from technical, quality and implementation points of view and to discuss availability of new business opportunities. It was noticed that there are new business models still available within laser technology applications in complex geometry cutting. Application of laser technology, in business-to-consume markets, in synergy with Internet service platforms can widen the customer base and offer new value streams for technology and service companies. Because of this, existing markets and competition has to be identified, and appropriate new and innovative business model needs to be developed. And to be competitive in the markets, models like these need to include the earning logic and the stages from production to delivery as discussed in the paper.

Technical Feasibility of a Mobile Context-Aware (Social) Learning Schedule Framework

ERIC Educational Resources Information Center

Yau, Jane Y. K.; Joy, Mike

2013-01-01

The purpose of this paper is to show the technical feasibility of implementing their mobile context-aware learning schedule (mCALS) framework as a software application on a mobile device using current technologies, prior to its actual implementation. This process draws a set of compatible mobile and context-aware technologies at present and can be…

76 FR 4641 - Children's Products Containing Lead; Technological Feasibility of 100 ppm for Lead Content...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-26

...Section 101(a) of the Consumer Product Safety Improvement Act (``CPSIA'') provides that, as of August 14, 2011, children's products may not contain more than 100 parts per million (``ppm'') of lead unless the Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') determines that such a limit is not technologically feasible. The Commission may make such a determination only after notice and a hearing and after analyzing the public health protections associated with substantially reducing lead in children's products. Through this notice, the Commission is announcing that it will conduct a public hearing to receive views from all interested parties about the technological feasibility of meeting the 100 ppm lead content limit for children's products and associated public health considerations.

Feasibility and Design Implications of Fuel Cell Power for Sealift Ships

DTIC Science & Technology

2010-01-01

Feasibility and Design Implications of Fuel Cell Power for Sealift Ships Jing Suna, John Stebeb, and Colen Kennellb a Department of Naval...studies published so far have focused on ship service power or on propulsion power for small vessels with moderate power requirements. Using a ... a large military cargo ship. A notional solid oxide fuel cell (SOFC) module is proposed and the implications of the technology on fuel savings and

Perimeter Security and Intruder Detection Using Gravity Gradiometry: A Feasibility Study

DTIC Science & Technology

2011-03-24

design, build, and operate, and it is usually not feasible to integrate new technology into an already existing system. So far, however, the...gravitational gradients is not a new concept and has been applied across a variety of industries. The first device for gravity gradient measurement was the...which generates a new simulated GGI reading. The program loops for a set number of iterations, and then ends by calculating algorithm performance

Japan's participation in space station design: Feasibility study of GaAs solar cells for space station applications

NASA Technical Reports Server (NTRS)

1986-01-01

The report gives the results of feasibility studies and a cost analysis done on GaAs solar battery cells for space stations. The studies and their results are as follows: (1) Cell size - The 2 x 4 cm cell size was found superior to the 4 x 4 cm cell; (2) Manufacturing technology - Overall, LPE crystal growth was found more suitable than MO-CVD. Current technology for post-growth processes and applying large-area cover glass can be used with few or no modifications; (3) Cell assemblies - Tests for mechanical and thermal stresses encountered from assembly through operation are recommended; (4) Procuring materials - Steps should be taken to avoid sharp price increases due to a speculative gallium market. There are no problems with arsenic materials; (5) Production facilities - The capital investment needed remains to be determined, but a working area of 4000 m2 will be required; (6) Cell costs to be determined; (7) Cell development-supply plan - Two-year lead time will be needed to develop the necessary technology and prepare for production.

Advanced imaging technologies for mapping cadaveric lymphatic anatomy: magnetic resonance and computed tomography lymphangiography.

PubMed

Pan, W R; Rozen, W M; Stretch, J; Thierry, B; Ashton, M W; Corlett, R J

2008-09-01

Lymphatic anatomy has become increasingly clinically important as surgical techniques evolve for investigating and treating cancer metastases. However, due to limited anatomical techniques available, research in this field has been insufficient. The techniques of computed tomography (CT) and magnetic resonance (MR) lymphangiography have not been described previously in the imaging of cadaveric lymphatic anatomy. This preliminary work describes the feasibility of these advanced imaging technologies for imaging lymphatic anatomy. A single, fresh cadaveric lower limb underwent lymphatic dissection and cannulation utilizing microsurgical techniques. Contrast materials for both CT and MR studies were chosen based on their suitability for subsequent clinical use, and imaging was undertaken with a view to mapping lymphatic anatomy. Microdissection studies were compared with imaging findings in each case. Both MR-based and CT-based contrast media in current clinical use were found to be suitable for demonstrating cadaveric lymphatic anatomy upon direct intralymphatic injection. MR lymphangiography and CT lymphangiography are feasible modalities for cadaveric anatomical research for lymphatic anatomy. Future studies including refinements in scanning techniques may offer these technologies to the clinical setting.

Feasibility study of an attention training application for older adults.

PubMed

Hill, Nikki L; Mogle, Jacqueline; Colancecco, Elise; Dick, Robert; Hannan, John; Lin, Feng Vankee

2015-09-01

Technology-based attention training has demonstrated promise in its potential to improve cognitive functioning in older people. Developing mobile applications, with older users specifically in mind, may support future dissemination of these interventions and integration into daily life. The purpose of this pilot study was to test the feasibility of an Attention Training Application (ATA) for community-dwelling older adults using mobile technology. A descriptive, mixed-methods design was used to capture older adults' feedback on the usability and acceptability of the ATA. A convenience sample of older adults (n = 9) from two independent living facilities participated in a 2-hour training and practice session with the ATA. Participants were given personally tailored instructions for using the mobile device and the ATA specifically. Following a practice session, participants provided ratings on multiple components of the ATA and completed an audio-recorded, semi-structured interview to provide detailed descriptions of their experience and perceptions. An iterative process of content analysis was used to characterise the open-ended responses. Participants rated the ATA favourably overall on several 0-10 scales including likeability [8.5 (1.6)], interest [8.8 (2.3)] and satisfaction [8.2 (1.9)]. The qualitative analyses revealed several issues relevant to the feasibility of the ATA among older people including the importance of the technological background of the user, limiting negative feedback, challenges with the touch screen interface, personal preferences for challenge, extending the practice period and the difficulty of the dual-task condition. The use of the ATA is feasible in the older adult population. Future development should specifically consider personal characteristics as well as preferences to maximise usability and acceptability among older people. Older adults enjoyed the ATA. This opens doors to user-friendly technological interventions that may be effective in assisting older adults maintain and possibly even improve their cognitive function. © 2015 John Wiley & Sons Ltd.

The Feasibility of Digital Pen and Paper Technology for Vital Sign Data Capture in Acute Care Settings

PubMed Central

Dykes, Patricia C.; Benoit, Angela; Chang, Frank; Gallagher, Joan; Li, Qi; Spurr, Cindy; McGrath, E. Jan; Kilroy, Susan M.; Prater, Marita

2006-01-01

The transition from paper to electronic documentation systems in acute care settings is often gradual and characterized by a period in which paper and electronic processes coexist. Intermediate technologies are needed to “bridge” the gap between paper and electronic systems as a means to improve work flow efficiency through data acquisition at the point of care in structured formats to inform decision support and facilitate reuse. The purpose of this paper is to report on the findings of a study conducted on three acute care units at Brigham and Women’s Hospital and Massachusetts General Hospital in Boston, MA to evaluate the feasibility of digital pen and paper technology as a means to capture vital sign data in the context of acute care workflows and to make data available in a flow sheet in the electronic medical record. PMID:17238337

The feasibility of digital pen and paper technology for vital sign data capture in acute care settings.

PubMed

Dykes, Patricia C; Benoit, Angela; Chang, Frank; Gallagher, Joan; Li, Qi; Spurr, Cindy; McGrath, E Jan; Kilroy, Susan M; Prater, Marita

2006-01-01

The transition from paper to electronic documentation systems in acute care settings is often gradual and characterized by a period in which paper and electronic processes coexist. Intermediate technologies are needed to "bridge" the gap between paper and electronic systems as a means to improve work flow efficiency through data acquisition at the point of care in structured formats to inform decision support and facilitate reuse. The purpose of this paper is to report on the findings of a study conducted on three acute care units at Brigham and Women's Hospital and Massachusetts General Hospital in Boston, MA to evaluate the feasibility of digital pen and paper technology as a means to capture vital sign data in the context of acute care workflows and to make data available in a flow sheet in the electronic medical record.

Solar energy concentrator system for crystal growth and zone refining in space

NASA Technical Reports Server (NTRS)

Mcdermit, J. H.

1975-01-01

The technological feasibility of using solar concentrators for crystal growth and zone refining in space has been performed. Previous studies of space-deployed solar concentrators were reviewed for their applicability to materials processing and a new state-of-the-art concentrator-receiver radiation analysis was developed. The radiation analysis is in the form of a general purpose computer program. It was concluded from this effort that the technology for fabricating, orbiting and deploying large solar concentrators has been developed. It was also concluded that the technological feasibility of space processing materials in the focal region of a solar concentrator depends primarily on two factors: (1) the ability of a solar concentrator to provide sufficient thermal energy for the process and (2) the ability of a solar concentrator to provide a thermal environment that is conductive to the processes of interest. The analysis indicate that solar concentrators can satisfactorily provide both of these factors.

Simulation of prenatal maternal sounds in NICU incubators: a pilot safety and feasibility study.

PubMed

Panagiotidis, John; Lahav, Amir

2010-10-01

This pilot study evaluated the safety and feasibility of an innovative audio system for transmitting maternal sounds to NICU incubators. A sample of biological sounds, consisting of voice and heartbeat, were recorded from a mother of a premature infant admitted to our unit. The maternal sounds were then played back inside an unoccupied incubator via a specialized audio system originated and compiled in our lab. We performed a series of evaluations to determine the safety and feasibility of using this system in NICU incubators. The proposed audio system was found to be safe and feasible, meeting criteria for humidity and temperature resistance, as well as for safe noise levels. Simulation of maternal sounds using this system seems achievable and applicable and received local support from medical staff. Further research and technology developments are needed to optimize the design of the NICU incubators to preserve the acoustic environment of the womb.

Psychotherapeutic Applications of Mobile Phone-based Technologies: A Systematic Review of Current Research and Trends.

PubMed

Menon, Vikas; Rajan, Tess Maria; Sarkar, Siddharth

2017-01-01

There is a growing interest in using mobile phone technology to offer real-time psychological interventions and support. However, questions remain on the clinical effectiveness and feasibility of such approaches in psychiatric populations. Our aim was to systematically review the published literature on mobile phone apps and other mobile phone-based technology for psychotherapy in mental health disorders. To achieve this, electronic searches of PubMed, ScienceDirect, and Google Scholar were carried out in January 2016. Generated abstracts were systematically screened for eligibility to be included in the review. Studies employing psychotherapy in any form, being delivered through mobile-based technology and reporting core mental health outcomes in mental illness were included in the study. We also included trials in progress with published protocols reporting at least some outcome measures of such interventions. From a total of 1563 search results, 24 eligible articles were identified and reviewed. These included trials in anxiety disorders (8), substance use disorders (5), depression (4), bipolar disorders (3), schizophrenia and psychotic disorders (3), and attempted suicide (1). Of these, eight studies involved the use of smartphone apps and others involved personalized text messages, automated programs, or delivered empirically supported treatments. Trial lengths varied from 6 weeks to 1 year. Good overall retention rates indicated that the treatments were feasible and largely acceptable. Benefits were reported on core outcomes in mental health illness indicating efficacy of such approaches though sample sizes were small. To conclude, mobile phone-based psychotherapies are a feasible and acceptable treatment option for patients with mental disorders. However, there remains a paucity of data on their effectiveness in real-world settings, especially from low- and middle-income countries.

A technology-enabled adherence enhancement system for people with bipolar disorder: results from a feasibility and patient acceptance analysis

PubMed Central

Sajatovic, Martha; Davis, Michael S; Cassidy, Kristin A; Nestor, Joseph; Sams, Johnny; Fuentes-Casiano, Edna

2015-01-01

Objective As poor medication adherence is common in bipolar disorder (BD), technology-assisted approaches may help to monitor and enhance adherence. This study evaluated preliminary feasibility, patient satisfaction and effects on adherence, BD knowledge, and BD symptoms associated with the use of a multicomponent technology-assisted adherence enhancement system. Methods This prospective study tested the system in five BD patients over a 15-day period. System components included: 1) an automated pill cap with remote monitoring sensor; 2) a multimedia adherence enhancement program; and 3) a treatment incentive program. This study evaluated system usability, patient satisfaction and effects on adherence (Morisky scale), knowledge (treatment knowledge test [TKT]), and symptoms (internal state scale [ISS]). Results Mean age of the sample was 62 years, 4/5 (80%) Caucasian, and 4/5 (80%) single/divorced or widowed. Most participants (4/5, 80%) were on a single BD medication. Participants had BD for an average of 21 years. Challenges included attaching the pill sensor to standard pharmacy bottles for individuals using very large pill containers or those with multiday pill boxes. Three of five (60%) individuals completed the full 15-day period. Usability scores were high overall. Mean Morisky scores improved. Means on all four subscales of the ISS were all in the direction of improvement. On the TKT, there was a 40% increase in mean scores. Conclusion A multicomponent technology-assisted BD adherence enhancement system is feasible. Challenges include accommodating multiple types of pill containers and monitoring multiple drugs simultaneously. The system can also generate adherence information that is potentially useful for treatment planning. PMID:26089652

On-orbit spacecraft servicing: An element in the evolution of space robotics applications

NASA Technical Reports Server (NTRS)

Anders, Carl J.; Roy, Claude H.

1994-01-01

This paper addresses the renewed interest in on-orbit spacecraft servicing (OSS), and how it fits into the evolution of space applications for intelligent robots. Investment in the development of space robotics and associated technologies is growing as nations recognize that it is a critical component of the exploration and commercial development of space. At the same time, changes in world conditions have generated a renewal of the interest in OSS. This is reflected in the level of activity in the U.S., Japan and Europe in the form of studies and technology demonstration programs. OSS is becoming widely accepted as an opportunity in the evolution of space robotics applications. Importantly, it is a feasible proposition with current technologies and the direction of ongoing research and development activities. Interest in OSS dates back more than two decades, and several programs have been initiated, but no operational system has come on line, arguably with the Shuttle as the exception. With new opportunities arising, however, a fresh look at the feasibility of OSS is warranted. This involves the resolution of complex market, technical and political issues, through market studies, economic analyses, mission requirement definitions, trade studies, concept designs and technology demonstrations. System architectures for OSS are strongly dependent on target spacecraft design and launch delivery systems. Performance and cost factors are currently forcing significant changes in these areas. This presents both challenges and opportunities in the provision of OSS services. In conclusion, there is no question OSS will become a reality, but only when the technical feasibility is combined with either economic viability or political will. In the evolution of space robotics satellite servicing can become the next step towards its eventual role in support of planetary exploration and human beings' journey out into the universe.

Engineering solutions of environmental problems in organic waste handling

NASA Astrophysics Data System (ADS)

Briukhanov, A. Y.; Vasilev, E. V.; Shalavina, E. V.; Kucheruk, O. N.

2017-10-01

This study shows the urgent need to consider modernization of agricultural production in terms of sustainable development, which takes into account environmental implications of intensive technologies in livestock farming. Some science-based approaches are offered to address related environmental challenges. High-end technologies of organic livestock waste processing were substantiated by the feasibility study and nutrient balance calculation. The technologies were assessed on the basis of best available techniques criteria, including measures such as specific capital and operational costs associated with nutrient conservation and their delivery to the plants.

Why use DFT methods in the study of carbohydrates?

USDA-ARS?s Scientific Manuscript database

The recent advances in density functional theory (DFT) and computer technology allow us to study systems with more than 100 atoms routinely. This makes it feasible to study large carbohydrate molecules via quantum mechanical methods, whereas in the past, studies of carbohydrates were restricted to ...

Development and evaluation of fiber optic sensors : final report.

DOT National Transportation Integrated Search

2003-05-01

This study investigated the feasibility of using fiber optic sensors to capture traffic data. Funding from the : study was used to develop a prototype sensor using fiber Bragg gratings (FBG) technology. The sensor was : tested on a high volume portla...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinelli, D.; Banta, L.; Peng, S.

This document presents the findings of a study conducted at West Virginia University to determine the feasibility of using a combination of longwall mining and standard landfill lining technologies to mitigate contamination of groundwater supplies by leachates from hazardous waste sites.

Are Cellulose Nanofibers a Solution for a More Circular Economy of Paper Products?

PubMed

Delgado-Aguilar, Marc; Tarrés, Quim; Pèlach, M Àngels; Mutjé, Pere; Fullana-I-Palmer, Pere

2015-10-20

This paper presents the study of the feasibility of incorporating lignocellulosic nanofibers (LCNF) to paper in order to maintain the relevant physical properties and increase the number of cycles that paper can be recycled in the technosphere in a more circular economy. For that purpose, the effect of mechanical refining in recycling processes was compared with that of the novel LCNF addition. In this sense, the behavior of a bleached kraft hardwood pulp when recycled was investigated, as well as the effects of each methodology. Since there are many issues to be considered when trying to replace a technology, the present paper analyses its feasibility from a technical and environmental point of view. Technically, LCNF present greater advantages against mechanical refining, such as higher mechanical properties and longer durability of the fibers. A preliminary life cycle assessment showed that the environmental impacts of both systems are very similar; however, changing the boundary conditions to some feasible future scenarios, led to demonstrate that the CNF technology may improve significantly those impacts.

Reviews on current carbon emission reduction technologies and projects and their feasibilities on ships

NASA Astrophysics Data System (ADS)

Wang, Haibin; Zhou, Peilin; Wang, Zhongcheng

2017-06-01

Concern about global climate change is growing, and many projects and researchers are committed to reducing greenhouse gases from all possible sources. International Maritime (IMO) has set a target of 20% CO2 reduction from shipping by 2020 and also presented a series of carbon emission reduction methods, which are known as Energy Efficiency Design Index (EEDI) and Energy Efficiency Operation Indicator (EEOI). Reviews on carbon emission reduction from all industries indicate that, Carbon Capture and Storage (CCS) is an excellent solution to global warming. In this paper, a comprehensive literature review of EEDI and EEOI and CCS is conducted and involves reviewing current policies, introducing common technologies, and considering their feasibilities for marine activities, mainly shipping. Current projects are also presented in this paper, thereby illustrating that carbon emission reduction has been the subject of attention from all over the world. Two case ship studies indicate the economic feasibility of carbon emission reduction and provide a guide for CCS system application and practical installation on ships.

Objective fall risk detection in stroke survivors using wearable sensor technology: a feasibility study.

PubMed

Taylor-Piliae, Ruth E; Mohler, M Jane; Najafi, Bijan; Coull, Bruce M

2016-12-01

Stroke survivors often have persistent neural deficits related to motor function and sensation, which increase their risk of falling, most of which occurs at home or in community settings. The use of wearable technology to monitor fall risk and gait in stroke survivors may prove useful in enhancing recovery and/or preventing injuries. Determine the feasibility of using wearable technology (PAMSys™) to objectively monitor fall risk and gait in home and community settings in stroke survivors. In this feasibility study, we used the PAMSys to identify fall risk indicators (postural transitions: duration in seconds, and number of unsuccessful attempts), and gait (steps, speed, duration) for 48 hours during usual daily activities in stroke survivors (n = 10) compared to age-matched controls (n = 10). A questionnaire assessed device acceptability. Stroke survivors mean age was 70 ± 8 years old, were mainly Caucasian (60%) women (70%), and not significantly different than the age-matched controls (all P-values >0.20). Stroke survivors (100%) reported that the device was comfortable to wear, didn't interfere with everyday activities, and were willing to wear it for another 48 hours. None reported any difficulty with the device while sleeping, removing/putting back on for showering or changing clothes. When compared to controls, stroke survivors had significantly worse fall risk indicators and walked less (P < 0.05). Stroke survivors reported high acceptability of 48 hours of continuous PAMSys monitoring. The use of in-home wearable technology may prove useful in monitoring fall risk and gait in stroke survivors, potentially enhancing recovery.

Feasibility Study on High Concentrating Photovoltaic Power Towers

NASA Astrophysics Data System (ADS)

Frohberger, Dirk; Jaus, Joachim; Wiesenfarth, Maike; Schramek, Philipp; Bett, Andreas W.

2010-10-01

This paper presents an analysis on the concept of high concentrating PV power towers. A feasibility study is conducted in order to evaluate the future potential of this technology. Objective of the analysis is to provide an improved basis for establishing research and development priorities for the PV power tower concept. Performance assessments and cost calculations for a 1 MW prototype PV tower power are derived. Based on the assumption of a highly homogeneously illuminated receiver, levelized costs of electricity of 0.29 €/kWh have been calculated for a prototype PV tower power.

Water vapour and wind measurements by a two micron space lidar

NASA Astrophysics Data System (ADS)

Ghibaudo, J.-B.; Labandibar, J.-Y.

2018-04-01

AEROSPATIALE presents the main results of the feasibility study under ESA contract on a coherent 2μm lidar instrument capable of measuring water vapour and wind velocity in the planetary boundary layer. The selected instrument configuration and the associated performance are provided, and the main critical subsystems identified (laser configuration, coherent receiver chain architecture, frequency locking and offsetting architecture. The second phase of this study is dedicated to breadboard the most critical elements of such an instrument in order to technologically consolidate its feasibility.

Robot-assisted task-oriented upper extremity skill training in cervical spinal cord injury: a feasibility study.

PubMed

Vanmulken, D A M M; Spooren, A I F; Bongers, H M H; Seelen, H A M

2015-07-01

Prospective multiple case study. To test (1) the feasibility of haptic robot technology (Haptic Master (HM)) use to improve arm-hand function (AHF) and arm-hand skill performance (AHSP) in persons with a cervical spinal cord injury (C-SCI), (2) inventory participants' motivation and expectation to work with the robot technology used and (3) to descriptively report the results in individual cases. Rehabilitation Centre. Five C-SCI patients were trained for 6 weeks, 3 days per week, 60 min per day. Therapists filled out the Usefulness, Satisfaction and Ease-of-use questionnaire (USE). The Intrinsic Motivational Inventory (IMI) and credibility and expectancy questionnaire (CEQ) were filled out by participants. Performance at activity level was gauged using the Van Lieshout test for AHF in Tetraplegia and the Spinal Cord Independence Measure. Function level was gauged using muscle strength testing and the International Classification for Surgery of the Hand in Tetraplegia. As to the feasibility of the application of haptic robot technology, the mean USE score was 65%. Mean IMI and CEQ results were 67% and 60%, respectively. Participants were motivated to train with the HM. All participants rated credibility higher than expectations regarding the improvement. In the current patients, little progress was demonstrated at the International Classification of Functioning, Disability and Health function and the activity level. It is feasible to train C-SCI persons with the HM. Therapists report that working with the HM is easy to learn and easy to perform. Usability of the HM may be improved. Further research is needed to assess in which group of C-SCI and at which stage of rehabilitation HM training may be most beneficial.

Low/medium-Btu coal-gasification feasibility study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1980-11-01

This study examines the feasibility of applying the concepts of Coal Gasification and Combined Cycle Technology to the re-powering of existing steam turbine-electric generating facilities. The primary objectives of this study include: (1) the determination of the feasibility of designing a technically sound system embodying this technology; (2) the determination of the potential for displacing foreign oil by the project; (3) the identificaton of any constraints and/or barriers that might impede the accomplishment of such a project; and (4) the evaluation of the potential benefits of such a system. Although the system is designed around the use of commercially available,more » state-of-the-art components and equipment, a completely integrated, electric generating plant, such as is being proposed here, has not yet been demonstrated. However, the designs developed as part of this study combine these components, utilizing well developed and technically sound concepts in such a way as to provide a reasonable degree of confidence in the workability of the total system. This study offers the potential for reducing oil dependency; the possibility of improving cycle efficiency and extending the useful life of existing facilities; the feasibility of re-vitalizing a facility located within a major load center; and presents some attractive possibilities for a co-generation, district heating application in the central portions of Bridgeport. Although the results of the study produce a number of clear conclusions, they also stimulate additional questions, the resolution of which would require further study and more detailed design. The final resolution of these questions that still remain may have a significant effect on the final conclusions concerning the viability of this project, and it is for this reason that further study is required.« less

The combined use of Skype and the STORZ CMAC video laryngoscope in field intubation training with the Nebraska National Air Guard.

PubMed

Boedeker, Ben H; Bernhagen, Mary; Miller, David J; Miljkovic, Nikola; Kuper, Gail M; Murray, W Bosseau

2011-01-01

This study examined the feasibility of using Skype technology in basic manikin intubation instruction of Nebraska National Air Guard personnel at a Casualty Training Exercise. Results show that the Skype monitor provided clear sound and visualization of the airway view to the trainees and the combination of VoIP technology and videolaryngoscopy for intubation training was highly valued by study participants.

Video chat technology to remotely quantify dietary, supplement and medication adherence in clinical trials.

PubMed

Peterson, Courtney M; Apolzan, John W; Wright, Courtney; Martin, Corby K

2016-11-01

We conducted two studies to test the validity, reliability, feasibility and acceptability of using video chat technology to quantify dietary and pill-taking (i.e. supplement and medication) adherence. In study 1, we investigated whether video chat technology can accurately quantify adherence to dietary and pill-taking interventions. Mock study participants ate food items and swallowed pills, while performing randomised scripted 'cheating' behaviours to mimic non-adherence. Monitoring was conducted in a cross-over design, with two monitors watching in-person and two watching remotely by Skype on a smartphone. For study 2, a twenty-two-item online survey was sent to a listserv with more than 20 000 unique email addresses of past and present study participants to assess the feasibility and acceptability of the technology. For the dietary adherence tests, monitors detected 86 % of non-adherent events (sensitivity) in-person v. 78 % of events via video chat monitoring (P=0·12), with comparable inter-rater agreement (0·88 v. 0·85; P=0·62). However, for pill-taking, non-adherence trended towards being more easily detected in-person than by video chat (77 v. 60 %; P=0·08), with non-significantly higher inter-rater agreement (0·85 v. 0·69; P=0·21). Survey results from study 2 (n 1076 respondents; ≥5 % response rate) indicated that 86·4 % of study participants had video chatting hardware, 73·3 % were comfortable using the technology and 79·8 % were willing to use it for clinical research. Given the capability of video chat technology to reduce participant burden and outperform other adherence monitoring methods such as dietary self-report and pill counts, video chatting is a novel and promising platform to quantify dietary and pill-taking adherence.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kuznetsov, Yury N.

The co-generation nuclear power plant (CNPP) producing electricity and district heating heat is planned to be constructed in Archangelsk Region of Russia. Following the 'Letter of Intent' signed by Governor of Archangelsk region and by Minister of the Russian Federation for atomic energy the feasibility study of the Project has been done. The NPP will be based on the four co-generation nuclear power units with the Russian VK-300 SBWR. The innovative passive VK-300 reactor facility has been designed on the basis of well-established nuclear technologies, proven major components, the operating experience of the prototype VK-50 reactor in RIAR, Dimitrovgrad, andmore » the experience in designing such reactors as SBWR (GE) and SWR-1000 (Siemens). The CNPP's total power is planned to be 1000 MW(e) and district-heating heat production capacity 1600 Gcal/h. A detailed description of the results of the feasibility study is presented in the report. The results of the feasibility study have shown that the Archangelsk CGNP is feasible in terms of engineering, economics and production. (authors)« less

Feasibility study of a microwave radar system for agricultural inspection

DOE Office of Scientific and Technical Information (OSTI.GOV)

Okelo-Odongo, S.

1994-10-03

The feasibility of an impulse radar system for agricultural inspection is investigated. This system would be able to quickly determine the quality of foodstuffs that are passed through the system. A prototype was designed at the Lawrence Livermore National Laboratory and this report discusses it`s evaluation. A variety of apples were used to test the system and preliminary data suggests that this technology holds promise for successful application on a large scale in food processing plants.

Feasibility of Large High-Powered Solar Electric Propulsion Vehicles: Issues and Solutions

NASA Technical Reports Server (NTRS)

Capadona, Lynn A.; Woytach, Jeffrey M.; Kerslake, Thomas W.; Manzella, David H.; Christie, Robert J.; Hickman, Tyler A.; Schneidegger, Robert J.; Hoffman, David J.; Klem, Mark D.

2012-01-01

Human exploration beyond low Earth orbit will require the use of enabling technologies that are efficient, affordable, and reliable. Solar electric propulsion (SEP) has been proposed by NASA s Human Exploration Framework Team as an option to achieve human exploration missions to near Earth objects (NEOs) because of its favorable mass efficiency as compared to traditional chemical systems. This paper describes the unique challenges and technology hurdles associated with developing a large high-power SEP vehicle. A subsystem level breakdown of factors contributing to the feasibility of SEP as a platform for future exploration missions to NEOs is presented including overall mission feasibility, trip time variables, propellant management issues, solar array power generation, array structure issues, and other areas that warrant investment in additional technology or engineering development.

Advanced cogeneration research study. Survey of cogeneration potential

NASA Technical Reports Server (NTRS)

Slonski, M. L.

1983-01-01

Fifty-five facilities that consumed substantial amounts of electricity, natural gas, or fuel oil were surveyed by telephone in 1983. The primary objective of the survey was to estimate the potential electricity that could be generated in the SCE service territory using cogeneration technology. An estimated 3667 MW sub e could potentially be generated using cogenerated technology. Of this total, current technology could provide 2569 MW sub p and advanced technology could provide 1098 MW sub e. Approximately 1611 MW sub t was considered not feasible to produce electricity with either current or advanced cogeneration technology.

The development, feasibility and acceptability of an Internet-based STI–HIV prevention intervention for young Chilean women

PubMed Central

Villegas, N.; Santisteban, D.; Cianelli, R.; Ferrer, L.; Ambrosia, T.; Peragallo, N.; Lara, L.

2014-01-01

Background Young Chilean women between 18 and 24 years of age are at high risk of contracting sexually transmitted infection (STI) and human immunodeficiency virus (HIV). The literature shows a shortage of STI–HIV prevention interventions focused on this specific high-risk population and a unique set of barriers to receiving prevention messages. Internet-based interventions are promising for delivering STI–HIV prevention interventions and avoiding barriers to services. Aims The study aimed to develop a culturally informed Internet-based STI–HIV prevention intervention for Chilean women between 18 and 24 years of age, to investigate its feasibility and acceptability, and to compile recommendations on what would make the intervention more acceptable and feasible for these women. Methods The development of the Internet intervention was facilitated by a process that featured consultation with content and technology experts. A pre-post test design was used to test the acceptability and feasibility of the intervention with 40 young Chilean women between 18 and 24 years of age. Results The intervention website consisted of four modules of content and activities that support learning. The intervention was feasible and acceptable for young Chilean women between 18 and 24 years of age. Discussion and conclusion This study demonstrated the value of engaging multiple expert panels to develop culturally informed and technology-based interventions. The results of this study support the feasibility and acceptability of conducting an Internet-based intervention with multiple sessions, yielding high participation rates in a population in which there are barriers to discussion of STI–HIV prevention and sex-related content. Implications for nursing and health policy The outcomes have implications for nursing education and clinical practice and they can be used for the legal and judicial systems to promote or reinforce policies that encourage STI–HIV prevention strategies among women. PMID:24512261

TScan : stationary LiDAR for traffic and safety studies : object detection and tracking.

DOT National Transportation Integrated Search

2016-08-01

The ability to accurately measure and cost-effectively collect traffic data at road intersections is needed to improve their safety and operations. This study investigates the feasibility of using laser ranging technology (LiDAR) for this purpose. Th...

Evaluating the impact of mobile telephone technology on type 2 diabetic patients' self-management: the NICHE pilot study.

PubMed

Faridi, Zubaida; Liberti, Lauren; Shuval, Kerem; Northrup, Veronika; Ali, Ather; Katz, David L

2008-06-01

Utilizing information technology, such as Internet and cellphones, holds great promise in enhancing diabetic care. Yet few studies have examined the impact of cellphone technology on type 2 diabetics' self-care. The primary aim of the study is to examine the feasibility of utilizing this technology to assist with diabetes self-care in a clinic population as well as its impact on clinical outcomes. Thirty patients with a diagnosis of type 2 diabetes at two Community Health Centers were randomized to intervention or control. Intervention patients participated in a brief intervention and received tailored daily messages via cellphone prompting them to enhance their diabetic self-care behaviour. Patients at the control site continued with their standard diabetes self-management. A mean improvement in HbA1c levels was apparent (-0.1, SD = 0.3%; P = 0.1534) in the intervention group, compared with a mean deterioration in the control (0.3, SD = 1.0%; P = 0.3813), yet without statistical significance. Self-efficacy scores improved significantly in the intervention group (-0.5, SD = 0.6; P = 0.0080) compared with no improvement in the control (0.0, SD = 1.0; P = 0.9060). Participants encountered numerous technological barriers when attempting to adhere to the intervention protocol. The results indicate the intervention had a positive impact on some clinical outcome and self-efficacy. Although the technology appears feasible in a clinical setting technology must be made more user-friendly before a larger phase II trial is conducted.

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang*

PubMed Central

Fang, Bin; Wang, Guang-huo; Van den berg, Marrit; Roetter, Reimund

2005-01-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China’s Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This approach allows assessing the impact of technology on pollution, is forward looking, and can yield information on the potential of on-the-shelf technology and provide opportunities for technology development. The approach particularly suits newly developed rice technologies with large potential of reducing nitrogen pollution and for future rice and vegetables technologies. The results showed that substantial reductions in nitrogen pollution are feasible for both types of crops. PMID:16187411

Identification of technology options for reducing nitrogen pollution in cropping systems of Pujiang.

PubMed

Fang, Bin; Wang, Guang-Huo; Van, Den Berg Marrit; Roetter, Reimund

2005-10-01

This work analyses the potential role of nitrogen pollution technology of crop systems of Pujiang, County in Eastern China's Zhejiang Province, rice and vegetables are important cropping systems. We used a case study approach involving comparison of farmer practices and improved technologies. This approach allows assessing the impact of technology on pollution, is forward looking, and can yield information on the potential of on-the-shelf technology and provide opportunities for technology development. The approach particularly suits newly developed rice technologies with large potential of reducing nitrogen pollution and for future rice and vegetables technologies. The results showed that substantial reductions in nitrogen pollution are feasible for both types of crops.

Continuous GPS : pilot applications - Phase II

DOT National Transportation Integrated Search

2003-08-01

The primary objective of this research was to evaluate the feasibility of applying Global Positioning System (GPS) technology in the study of geotechnical phenomenon by developing, integrating, and test deploying a GPS-based instrumentation package u...

Workshop/Seminar Requirements Study

DOT National Transportation Integrated Search

1976-02-01

The feasibility of using the workshop/seminar technique as an effective communication tool for technology sharing was affirmed by the use of a national survey of potential users of Federal DOT Research and Development products. The survey encompassed...

Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions

PubMed Central

Hall, Cristin M.; Bierman, Karen L.

2016-01-01

Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery. PMID:27773964

Technology-assisted Interventions for Parents of Young Children: Emerging Practices, Current Research, and Future Directions.

PubMed

Hall, Cristin M; Bierman, Karen L

Technology can potentially expand the reach and cut the costs of providing effective, evidence-based interventions. This paper reviews existing publications that describe the application and evaluation of technology-assisted interventions for parents of young children. A broad review of the early childhood literature revealed 48 studies describing technology-assisted parent education and interventions. Across these studies, multiple forms of technology were used, including web-based platforms, discussion forums, mobile devices, and video conferencing. Results are described moving from feasibility and acceptability of technology-based delivery systems to more rigorous evaluations examining their impact on parent and child outcomes. Potential exists for technology to deliver interventions to parents. Limitations are discussed including differential acceptability and elevated attrition associated with internet-only intervention delivery.

Innovative technology: Slurry-phase biodegradation. Fact sheet (Final)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-11-01

The fact sheet provides technology description, site characteristics affecting treatment feasibility, technology considerations, and technology status for Slurry Phase Biodegradation (SPB). The sheet describes how SPB is potentially effective in treating various organic contaminants.

Microwave Power Transmission System Studies. Volume 1: Executive Summary

NASA Technical Reports Server (NTRS)

Maynard, O. E.; Brown, W. C.; Edwards, A.; Meltz, G.; Haley, J. T.; Howell, J. M.; Nathan, A.

1975-01-01

A study of microwave power generation, transmission, reception and control was conducted as a part of a program to demonstrate the feasibility of power transmission from geosynchronous orbit. A summary is presented of results concerning design approaches, estimated costs (ROM), critical technology, associated ground and orbital test programs with emphasis on dc to rf conversion, transmitting antenna, phase control, mechanical systems, flight operations, ground power receiving-rectifying antenna with systems analysis, and evaluation. Recommendations for early further in-depth studies complementing the technology program are included.

Initial animal studies of a wireless, batteryless, MEMS implant for cardiovascular applications.

PubMed

Najafi, Nader; Ludomirsky, Achiau

2004-03-01

This paper reports the results of the initial animal studies of a wireless, batteryless, implantable pressure sensor using microelectromechanical systems (MEMS) technology. The animal studies were acute and proved the functional feasibility of using MEMS technology for wireless bio sensing. The results are very encouraging and surpassed the majority of the application's requirements, including high sampling speed and high resolution. Based on the lessons learned, second generation wireless sensors are being developed that will provide total system solution.

Project IMPACT Pilot Report: Feasibility of Implementing a Hospital-to-Home Transition Bundle.

PubMed

Mallory, Leah A; Osorio, Snezana Nena; Prato, B Stephen; DiPace, Jennifer; Schmutter, Lisa; Soung, Paula; Rogers, Amanda; Woodall, William J; Burley, Kayla; Gage, Sandra; Cooperberg, David

2017-03-01

To improve hospital to home transitions, a 4-element pediatric patient-centered transition bundle was developed, including: a transition readiness checklist; predischarge teach-back education; timely and complete written handoff to the primary care provider; and a postdischarge phone call. The objective of this study was to demonstrate the feasibility of bundle implementation and report initial outcomes at 4 pilot sites. Outcome measures included postdischarge caregiver ability to teach-back key home management information and 30-day reuse rates. A multisite, observational time series using multiple planned sequential interventions to implement bundle components with non-technology-supported and technology-supported patients. Data were collected via electronic health record reviews and during postdischarge phone calls. Statistical process control charts were used to assess outcomes. Four pilot sites implemented the bundle between January 2014 and May 2015 for 2601 patients, of whom 1394 had postdischarge telephone encounters. Improvement was noted in the implementation of all bundle elements with the transitions readiness checklist posing the greatest feasibility challenge. Phone contact connection rates were 69%. Caregiver ability to teach-back essential home management information postdischarge improved from 18% to 82%. No improvement was noted in reuse rates, which differed dramatically between technology-supported and non-technology-supported patients. A pediatric care transition bundle was successfully tested and implemented, as demonstrated by improvement in all process measures, as well as caregiver home management skills. Important considerations for successful implementation and evaluation of the discharge bundle include the role of local context, electronic health record integration, and subgroup analysis for technology-supported patients. Copyright © 2017 by the American Academy of Pediatrics.

Mobile Health Technology in Late-Life Mental Illness: A Focused Literature Review.

PubMed

Moussa, Yara; Mahdanian, Artin A; Yu, Ching; Segal, Marilyn; Looper, Karl J; Vahia, Ipsit V; Rej, Soham

2017-08-01

In an era of rising geriatric mental health care needs worldwide, technological advances can help address care needs in a cost-effective fashion. Our objective in this review was to assess whether mobile health technology, such as tablets and smartphones, are feasible to use in patients with late-life mental and cognitive disorders, as well as whether they were generally reliable modes of mental health/cognitive assessment. We performed a focused literature review of MEDLINE, PsychInfo, and Embase databases, including papers specifically assessing the implementation of mobile health technologies: electronic tablets (e.g., iPad), smartphones, and other mobile computerized equipment in older adults (age ≥65 years) diagnosed with or at risk of a mental and/or cognitive disorder. A total of 2,079 records were assessed, of which 7 papers were of direct relevance. Studies investigated a broad variety of mobile health technologies. Almost all examined samples with dementia/cognitive dysfunction or at risk for those disorders. All studies exclusively examined the use of mobile health technologies for the assessment of cognitive and or mental illness symptoms or disorders. None of the studies reported participants having any difficulties using the mobile health technology assessments and overall reliability was similar to paper-and-pencil modes of assessment. Overall, mobile health technologies were found to be feasible by patients and had promising reliability for the assessment of cognitive and mental illness domains in older adults. Future clinical trials will be necessary to assess whether portable communication interventions (e.g., symptom tracking) can improve geriatric mental health outcomes. Copyright © 2017 American Association for Geriatric Psychiatry. Published by Elsevier Inc. All rights reserved.

Feasibility of absolute cerebral tissue oxygen saturation during cardiopulmonary resuscitation.

PubMed

Meex, Ingrid; De Deyne, Cathy; Dens, Jo; Scheyltjens, Simon; Lathouwers, Kevin; Boer, Willem; Vundelinckx, Guy; Heylen, René; Jans, Frank

2013-03-01

Current monitoring during cardiopulmonary resuscitation (CPR) is limited to clinical observation of consciousness, breathing pattern and presence of a pulse. At the same time, the adequacy of cerebral oxygenation during CPR is critical for neurological outcome and thus survival. Cerebral oximetry, based on near-infrared spectroscopy (NIRS), provides a measure of brain oxygen saturation. Therefore, we examined the feasibility of using NIRS during CPR. Recent technologies (FORE-SIGHT™ and EQUANOX™) enable the monitoring of absolute cerebral tissue oxygen saturation (SctO2) values without the need for pre-calibration. We tested both FORE-SIGHT™ (five patients) and EQUANOX Advance™ (nine patients) technologies in the in-hospital as well as the out-of-hospital CPR setting. In this observational study, values were not utilized in any treatment protocol or therapeutic decision. An independent t-test was used for statistical analysis. Our data demonstrate the feasibility of both technologies to measure cerebral oxygen saturation during CPR. With the continuous, pulseless near-infrared wave analysis of both FORE-SIGHT™ and EQUANOX™ technology, we obtained SctO2 values in the absence of spontaneous circulation. Both technologies were able to assess the efficacy of CPR efforts: improved resuscitation efforts (improved quality of chest compressions with switch of caregivers) resulted in higher SctO2 values. Until now, the ability of CPR to provide adequate tissue oxygenation was difficult to quantify or to assess clinically due to a lack of specific technology. With both technologies, any change in hemodynamics (for example, ventricular fibrillation) results in a reciprocal change in SctO2. In some patients, a sudden drop in SctO2 was the first warning sign of reoccurring ventricular fibrillation. Both the FORE-SIGHT™ and EQUANOX™ technology allow non-invasive monitoring of the cerebral oxygen saturation during CPR. Moreover, changes in SctO2 values might be used to monitor the efficacy of CPR efforts.

Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Islam, M.R., E-mail: mrislam1985@yahoo.com; Joardder, M.U.H.; Hasan, S.M.

2011-09-15

In this study on the basis of lab data and available resources in Bangladesh, feasibility study has been carried out for pyrolysis process converting solid tire wastes into pyrolysis oils, solid char and gases. The process considered for detailed analysis was fixed-bed fire-tube heating pyrolysis reactor system. The comparative techno-economic assessment was carried out in US$ for three different sizes plants: medium commercial scale (144 tons/day), small commercial scale (36 tons/day), pilot scale (3.6 tons/day). The assessment showed that medium commercial scale plant was economically feasible, with the lowest unit production cost than small commercial and pilot scale plants formore » the production of crude pyrolysis oil that could be used as boiler fuel oil and for the production of upgraded liquid-products.« less

Feasibility of a personal health technology-based psychological intervention for men with stress and mood problems: randomized controlled pilot trial.

PubMed

Lappalainen, Päivi; Kaipainen, Kirsikka; Lappalainen, Raimo; Hoffrén, Henna; Myllymäki, Tero; Kinnunen, Marja-Liisa; Mattila, Elina; Happonen, Antti P; Rusko, Heikki; Korhonen, Ilkka

2013-01-09

Work-related stress is a significant problem for both people and organizations. It may lead to mental illnesses such as anxiety and depression, resulting in increased work absences and disabilities. Scalable interventions to prevent and manage harmful stress can be delivered with the help of technology tools to support self-observations and skills training. The aim of this study was to assess the feasibility of the P4Well intervention in treatment of stress-related psychological problems. P4Well is a novel intervention which combines modern psychotherapy (the cognitive behavioral therapy and the acceptance and commitment therapy) with personal health technologies to deliver the intervention via multiple channels, includinggroup meetings, Internet/Web portal, mobile phone applications, and personal monitoring devices. This pilot study design was a small-scale randomized controlled trial that compared the P4Well intervention with a waiting list control group. In addition to personal health technologies for self-assessment, the intervention consisted of 3 psychologist-assisted group meetings. Self-assessed psychological measures through questionnaires were collected offline pre- and post-intervention, and 6 months after the intervention for the intervention group. Acceptance and usage of technology tools were measured with user experience questionnaires and usage logs. A total of 24 subjects were randomized: 11 participants were followed up in the intervention group (1 was lost to follow-up) and 12 participants did not receive any intervention (control group). Depressive and psychological symptoms decreased and self-rated health and working ability increased. All participants reported they had benefited from the intervention. All technology tools had active users and 10/11 participants used at least 1 tool actively. Physiological measurements with personal feedback were considered the most useful intervention component. Our results confirm the feasibility of the intervention and suggest that it had positive effects on psychological symptoms, self-rated health, and self-rated working ability. The intervention seemed to have a positive impact on certain aspects of burnout and job strain, such as cynicism and over-commitment. Future studies need to investigate the effectiveness, benefits, and possible problems of psychological interventions which incorporate new technologies. The Finnish Funding Agency for Technology and Innovation (TEKES), Project number 40011/08.

Active Treatment for Idiopathic Adolescent Scoliosis (ACTIvATeS): a feasibility study.

PubMed

Williams, Mark A; Heine, Peter J; Williamson, Esther M; Toye, Francine; Dritsaki, Melina; Petrou, Stavros; Crossman, Richard; Lall, Ranjit; Barker, Karen L; Fairbank, Jeremy; Harding, Ian; Gardner, Adrian; Slowther, Anne-Marie; Coulson, Neil; Lamb, Sarah E

2015-07-01

The feasibility of conducting a definitive randomised controlled trial (RCT) evaluating the clinical effectiveness and cost-effectiveness of scoliosis-specific exercises (SSEs) for adolescent idiopathic scoliosis (AIS) is uncertain. The aim of this study was to assess the feasibility of conducting a large, multicentre trial of SSE treatment for patients with AIS, in comparison with standard care, and to refine elements of the study design. The objectives were to (1) update a systematic review of controlled trials evaluating the efficacy of SSE in AIS; (2) survey UK orthopaedic surgeons and physiotherapists to determine current practice, patient populations and equipoise; (3) randomise 50 adolescents to a feasibility trial of either usual care or SSE interventions across a range of sites; (4) develop, document and assess acceptability and adherence of interventions; (5) assess and describe training requirements of physiotherapists; and (6) gain user input in all relevant stages of treatment and protocol design. Multicomponent feasibility study including UK clinician survey, systematic literature review and a randomised feasibility trial. The randomised feasibility study involved four secondary care NHS trusts providing specialist care for patients with AIS. The randomised feasibility study recruited people aged 10-16 years with mild AIS (Cobb angle of < 50°). The randomised study allocated participants to standard practice of advice and education or a physiotherapy SSE programme supported by a home exercise plan. Our choice of intervention was informed by a systematic review of exercise interventions for AIS. The main outcome was feasibility of recruitment to the randomised study. Other elements were to inform choice of outcomes for a definitive trial and included curve severity, quality of life, requirement for surgery/brace, adverse events, psychological symptoms, costs and health utilities. A UK survey of orthopaedic consultants and physiotherapists indicated a wide variation in current provision of exercise therapy through physiotherapy services. It also found that clinicians from at least 15 centres would be willing to have their patients involved in a full study. A systematic review update found five new studies that were generally of low quality but showed some promise of effectiveness of SSE. The randomised study recruited 58 patients from four NHS trusts over 11 months and exceeded the pre-specified target recruitment rate of 1.4 participants per centre per month, with acceptable 6-month follow-up (currently 73%). Adherence to treatment was variable (56% of participants completed treatment offered). The qualitative study found the exercise programme to be highly acceptable. We learnt important lessons from patient and public involvement during the study in terms of study and intervention presentation, as well as practical elements such as scheduling of intervention sessions. A definitive RCT evaluating clinical effectiveness and cost-effectiveness of SSE for idiopathic scoliosis is warranted and feasible. Such a RCT is a priority for future work in the area. There is a sufficiently large patient base, combined with willingness to be randomised within specialist UK centres. Interventions developed during the feasibility study were acceptable to patients, families and physiotherapists and can be given within the affordability envelope of current levels of physiotherapy commissioning. Current Controlled Trials ISRCTN90480705. This project was funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 19, No. 55. See the NIHR Journals Library website for further project information.

Design definition study of NASA/Navy lift/cruise fan V/STOL aircraft

NASA Technical Reports Server (NTRS)

1975-01-01

Assessed are the risks associated with the lift/cruise fan technology V/STOL aircraft program. Three candidate concepts for the technology aircraft design approach are considered: the lowspeed only modification, the full performance modification, and the all new aircraft concepts. Survey results indicate that the lift/cruise fan technology aircraft program is feasible, from the standpoint of technical risk, with some evidence of uncertainty of meeting the planned schedule and relatively minor impact on estimated program costs.

Maintaining Cognitive Functioning in Healthy Seniors with a Technology-Based Foreign Language Program: A Pilot Feasibility Study.

PubMed

Ware, Caitlin; Damnee, Souad; Djabelkhir, Leila; Cristancho, Victoria; Wu, Ya-Huei; Benovici, Judith; Pino, Maribel; Rigaud, Anne-Sophie

2017-01-01

Researchers have hypothesized that learning a foreign language could be beneficial for seniors, as language learning requires the use of extensive neural networks. We developed and qualitatively evaluated an English training program for older French adults; our principal objective was to determine whether a program integrating technology is feasible for this population. We conducted a 4-month pilot study (16, 2-h sessions) with 14 French participants, (nine women, five men, average age 75). Questionnaires were administered pre- and post-intervention to measure cognitive level and subjective feelings of loneliness or social isolation; however, these scores did not improve significantly. Post-intervention, semi-directive interviews were carried out with participants, and a content/theme analysis was performed. Five main themes were identified from the interviews: Associations with school, attitudes toward English, motivation for learning English, attitudes toward the program's organization, and social ties. The program was found to be feasible for this age group, yet perceived as quite difficult for participants who lacked experience with English. Nonetheless, most participants found the program to be stimulating and enjoyable. We discuss different suggestions for future programs and future directions for foreign-language learning as a therapeutic and cognitive intervention.

Feasibility Study on a Microwave-Based Sensor for Measuring Hydration Level Using Human Skin Models

PubMed Central

Brendtke, Rico; Wiehl, Michael; Groeber, Florian; Schwarz, Thomas; Walles, Heike; Hansmann, Jan

2016-01-01

Tissue dehydration results in three major types of exsiccosis—hyper-, hypo-, or isonatraemia. All three types entail alterations of salt concentrations leading to impaired biochemical processes, and can finally cause severe morbidity. The aim of our study was to demonstrate the feasibility of a microwave-based sensor technology for the non-invasive measurement of the hydration status. Electromagnetic waves at high frequencies interact with molecules, especially water. Hence, if a sample contains free water molecules, this can be detected in a reflected microwave signal. To develop the sensor system, human three-dimensional skin equivalents were instituted as a standardized test platform mimicking reproducible exsiccosis scenarios. Therefore, skin equivalents with a specific hydration and density of matrix components were generated and microwave measurements were performed. Hydration-specific spectra allowed deriving the hydration state of the skin models. A further advantage of the skin equivalents was the characterization of the impact of distinct skin components on the measured signals to investigate mechanisms of signal generation. The results demonstrate the feasibility of a non-invasive microwave-based hydration sensor technology. The sensor bears potential to be integrated in a wearable medical device for personal health monitoring. PMID:27046226

Feasibility Study on a Microwave-Based Sensor for Measuring Hydration Level Using Human Skin Models.

PubMed

Brendtke, Rico; Wiehl, Michael; Groeber, Florian; Schwarz, Thomas; Walles, Heike; Hansmann, Jan

2016-01-01

Tissue dehydration results in three major types of exsiccosis--hyper-, hypo-, or isonatraemia. All three types entail alterations of salt concentrations leading to impaired biochemical processes, and can finally cause severe morbidity. The aim of our study was to demonstrate the feasibility of a microwave-based sensor technology for the non-invasive measurement of the hydration status. Electromagnetic waves at high frequencies interact with molecules, especially water. Hence, if a sample contains free water molecules, this can be detected in a reflected microwave signal. To develop the sensor system, human three-dimensional skin equivalents were instituted as a standardized test platform mimicking reproducible exsiccosis scenarios. Therefore, skin equivalents with a specific hydration and density of matrix components were generated and microwave measurements were performed. Hydration-specific spectra allowed deriving the hydration state of the skin models. A further advantage of the skin equivalents was the characterization of the impact of distinct skin components on the measured signals to investigate mechanisms of signal generation. The results demonstrate the feasibility of a non-invasive microwave-based hydration sensor technology. The sensor bears potential to be integrated in a wearable medical device for personal health monitoring.

Exploratory investigation of high-performance fiber-reinforced cementitious composites for crack control.

DOT National Transportation Integrated Search

2008-01-01

This study evaluated high-performance fiber-reinforced cementitious composites (HPFRCC), which are mortar mixtures with synthetic and steel fibers. The feasibility of using HPFRCC technology for transportation applications by the Virginia Department ...

Feasibility Study for Electronic Fitness for Duty Medical Examination Reporting and Oversight.

DOT National Transportation Integrated Search

2016-11-01

This report examines the institutional and high-level technology aspects associated with potential mandated : electronic reporting of every commercial driver license (CDL) driver fitness-for-duty medical examination : performed by a medical examiner ...

Advanced Solar Cell and Array Technology for NASA Deep Space Missions

NASA Technical Reports Server (NTRS)

Piszczor, Michael; Benson, Scott; Scheiman, David; Finacannon, Homer; Oleson, Steve; Landis, Geoffrey

2008-01-01

A recent study by the NASA Glenn Research Center assessed the feasibility of using photovoltaics (PV) to power spacecraft for outer planetary, deep space missions. While the majority of spacecraft have relied on photovoltaics for primary power, the drastic reduction in solar intensity as the spacecraft moves farther from the sun has either limited the power available (severely curtailing scientific operations) or necessitated the use of nuclear systems. A desire by NASA and the scientific community to explore various bodies in the outer solar system and conduct "long-term" operations using using smaller, "lower-cost" spacecraft has renewed interest in exploring the feasibility of using photovoltaics for to Jupiter, Saturn and beyond. With recent advances in solar cell performance and continuing development in lightweight, high power solar array technology, the study determined that photovoltaics is indeed a viable option for many of these missions.

Feasibility of a Low-Cost, Interactive Gaming System to Assess Balance in Older Women.

PubMed

Hall, Courtney D; Clevenger, Carolyn K; Wolf, Rachel A; Lin, James S; Johnson, Theodore M; Wolf, Steven L

2016-01-01

The use of low-cost interactive game technology for balance rehabilitation has become more popular recently, with generally good outcomes. Very little research has been undertaken to determine whether this technology is appropriate for balance assessment. The Wii balance board has good reliability and is comparable to a research-grade force plate; however, recent studies examining the relationship between Wii Fit games and measures of balance and mobility demonstrate conflicting findings. This study found that the Wii Fit was feasible for community-dwelling older women to safely use the balance board and quickly learn the Wii Fit games. The Ski Slalom game scores were strongly correlated with several balance and mobility measures, whereas Table Tilt game scores were not. Based on these findings, the Ski Slalom game may have utility in the evaluation of balance problems in community-dwelling older adults.

Technical Feasibility Study for Zero Energy K-12 Schools

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pless, Shanti D.; Torcellini, Paul A.; Bonnema, Eric

A simulation-based technical feasibility study was completed to show the types of technologies required to achieve ZEB status with this building type. These technologies are prioritized across the building's subsystem such that design teams can readily integrate the ideas. Energy use intensity (EUI) targets were established for U.S. climate zones such that K-12 schools can be zero-ready or can procure solar panels or other renewable energy production sources to meet the zero energy building definition. Results showed that it is possible for K-12 schools to achieve zero energy when the EUI is between 20 and 26 kBtu/ft2/yr. Temperate climates requiredmore » a smaller percentage of solar panel coverage than very hot or very cold climates. The paper provides a foundation for technically achieving zero energy schools with a vision of transforming the school construction market to mainstream zero energy buildings within typical construction budgets.« less

VIDAC; A New Technology for Increasing the Effectiveness of Television Distribution Networks: Report on a Feasibility Study of a Central Library "Integrated Media" Satellite Delivery System.

ERIC Educational Resources Information Center

Diambra, Henry M.; And Others

VIDAC (Video Audio Compressed), a new technology based upon non-real-time transmission of audiovisual information via conventional television systems, has been invented by the Westinghouse Electric Corporation. This system permits time compression, during storage and transmission of the audio component of a still visual-narrative audio…

Technology Training for Older Job-Seeking Adults: The Efficacy of a Program Offered through a University-Community Collaboration

ERIC Educational Resources Information Center

Taha, Jessica; Czaja, Sara J.; Sharit, Joseph

2016-01-01

Many older adults who lose their jobs face challenges in finding new employment due to fundamental limitations in their technology skills. While training could give them the skills they need, older workers often have less access to training programs than younger workers. This study examined the feasibility of using an e-learning training program…

A Manpower Development Model for an Emerging Technology: A Systems Approach to Curriculum Development for Solar Technician Training.

ERIC Educational Resources Information Center

Green, C. Paul; Orsak, Charles G.

Undertaking of a systems approach to curriculum development for solar training led to (1) a feasibility study to determine the role of the community college in solar energy technology, (2) a market analysis to determine the manpower need, and (3) a task analysis for development of a curriculum for training solar energy technicians at Navarro…

Investigating the Effect of Learning Styles in a Blended E-Learning System: An Extension of the Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Al-Azawei, Ahmed; Parslow, Patrick; Lundqvist, Karsten

2017-01-01

This study assesses learner perceptions of a blended e-learning system (BELS) and the feasibility of accommodating educational hypermedia systems (EHSs) according to learning styles using a modified version of the technology acceptance model (TAM). Recently, Moodle has been adopted by an Iraqi university alongside face-to-face (F2F) classrooms to…

Research on the development of green chemistry technology assessment techniques: a material reutilization case.

PubMed

Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

2015-01-01

This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

Multiple Stakeholder Perspectives on Teletherapy Delivery of Speech Pathology Services in Rural Schools: A Preliminary, Qualitative Investigation

PubMed Central

LINCOLN, MICHELLE; HINES, MONIQUE; FAIRWEATHER, CRAIG; RAMSDEN, ROBYN; MARTINOVICH, JULIA

2015-01-01

The objective of this study was to investigate stakeholders’ views on the feasibility and acceptability of a pilot speech pathology teletherapy program for children attending schools in rural New South Wales, Australia. Nine children received speech pathology sessions delivered via Adobe Connect® web-conferencing software. During semi-structured interviews, school principals (n = 3), therapy facilitators (n = 7), and parents (n = 6) described factors that promoted or threatened the program’s feasibility and acceptability. Themes were categorized according to whether they related to (a) the use of technology; (b) the school-based nature of the program; or (c) the combination of using technology with a school-based program. Despite frequent reports of difficulties with technology, teletherapy delivery of speech pathology services in schools was highly acceptable to stakeholders. However, the use of technology within a school environment increased the complexities of service delivery. Service providers should pay careful attention to planning processes and lines of communication in order to promote efficiency and acceptability of teletherapy programs. PMID:25945230

FEASIBILITY OF WIND TO SERVE UPPER SKAGIT'S BOW HILL TRIBAL LANDS AND FEASIBILITY UPDATE FOR RESIDENTIAL RENEWABLE ENERGY.

DOE Office of Scientific and Technical Information (OSTI.GOV)

RICH, LAUREN

2013-09-30

A two year wind resource assessment was conducted to determine the feasibility of developing a community scale wind generation system for the Upper Skagit Indian Tribe's Bow Hill land base, and the project researched residential wind resource technologies to determine the feasibility of contributing renewable wind resource to the mix of energy options for our single and multi-family residential units.

Biological effects of electrolyzed water in hemodialysis.

PubMed

Nakayama, Masaaki; Kabayama, Shigeru; Nakano, Hirofumi; Zhu, Wan-Jun; Terawaki, Hiroyuki; Nakayama, Keisuke; Katoh, Kiyoshi; Satoh, Toshinobu; Ito, Sadayoshi

2009-01-01

The application of electrolyzed water (EW) at the cathode side to manufacture reverse osmosis (RO) water and hemodialysis (HD) solution can actually lead to less oxidative capacity in chemical terms. The present study examined the biological actions of this water on human polymorphonuclear leukocytes (PMNs), and the clinical feasibility of applying this technology to HD treatment. RO water using EW (e-RO) exhibited less chemiluminescence in luminol-hydrogen peroxide and higher dissolved hydrogen levels (-99.0 ppb) compared with control RO water. The effects of e-RO on PMN viability were tested. HD using e-RO was performed for 12 consecutive sessions in 8 patients for the feasibility test. Basal cellular viability and function to generate superoxide radicals of PMNs were better preserved by e-RO application. In the clinical trial, reductions of blood pressure were noted, but no adverse events were observed. There were no changes in the blood dialysis parameters, although methylguanidine levels were significantly decreased at the end of study. The present study demonstrated the capacity of e-RO to preserve the viability of PMNs, and the clinical feasibility of applying this water for HD treatment. The clinical application of this technology may improve the bio-compatibility of HD treatment. Copyright 2009 S. Karger AG, Basel.

A feasibility study for advanced technology integration for general aviation

NASA Technical Reports Server (NTRS)

Kohlman, D. L.; Matsuyama, G. T.; Hawley, K. E.; Meredith, P. T.

1980-01-01

An investigation was conducted to identify candidate technologies and specific developments which offer greatest promise for improving safety, fuel efficiency, performance, and utility of general aviation airplanes. Interviews were conducted with general aviation airframe and systems manufacturers and NASA research centers. The following technologies were evaluated for use in airplane design tradeoff studies conducted during the study: avionics, aerodynamics, configurations, structures, flight controls, and propulsion. Based on industry interviews and design tradeoff studies, several recommendations were made for further high payoff research. The most attractive technologies for use by the general aviation industry appear to be advanced engines, composite materials, natural laminar flow airfoils, and advanced integrated avionics systems. The integration of these technologies in airplane design can yield significant increases in speeds, ranges, and payloads over present aircraft with 40 percent to 50 percent reductions in fuel used.

Feasibility of Augmented Reality in Clinical Simulations: Using Google Glass With Manikins.

PubMed

Chaballout, Basil; Molloy, Margory; Vaughn, Jacqueline; Brisson Iii, Raymond; Shaw, Ryan

2016-03-07

Studies show that students who use fidelity-based simulation technology perform better and have higher retention rates than peers who learn in traditional paper-based training. Augmented reality is increasingly being used as a teaching and learning tool in a continual effort to make simulations more realistic for students. The aim of this project was to assess the feasibility and acceptability of using augmented reality via Google Glass during clinical simulation scenarios for training health science students. Students performed a clinical simulation while watching a video through Google Glass of a patient actor simulating respiratory distress. Following participation in the scenarios students completed two surveys and were questioned if they would recommend continued use of this technology in clinical simulation experiences. We were able to have students watch a video in their field of vision of a patient who mimicked the simulated manikin. Students were overall positive about the implications for being able to view a patient during the simulations, and most students recommended using the technology in the future. Overall, students reported perceived realism with augmented reality using Google Glass. However, there were technical and usability challenges with the device. As newer portable and consumer-focused technologies become available, augmented reality is increasingly being used as a teaching and learning tool to make clinical simulations more realistic for health science students. We found Google Glass feasible and acceptable as a tool for augmented reality in clinical simulations.

Cooled variable-area radial turbine technology program

NASA Technical Reports Server (NTRS)

Large, G. D.; Meyer, L. J.

1982-01-01

The objective of this study was a conceptual evaluation and design analyses of a cooled variable-area radial turbine capable of maintaining nearly constant high efficiency when operated at a constant speed and pressure ratio over a range of flows corresponding to 50- to 100-percent maximum engine power. The results showed that a 1589K (2400 F) turbine was feasible that would satisfy a 4000-hour duty cycle life goal. The final design feasibility is based on 1988 material technology goals. A peak aerodynamic stage total efficiency of 0.88 was predicted at 100 percent power. Two candidate stators were identified: an articulated trailing-edge and a locally movable sidewall. Both concepts must be experimentally evaluated to determine the optimum configuration. A follow-on test program is proposed for this evaluation.

Facebook advertisements recruit parents of children with cancer for an online survey of web-based research preferences.

PubMed

Akard, Terrah Foster; Wray, Sarah; Gilmer, Mary Jo

2015-01-01

Studies involving samples of children with life-threatening illnesses and their families face significant challenges, including inadequate sample sizes and limited diversity. Social media recruitment and Web-based research methods may help address such challenges yet have not been explored in pediatric cancer populations. This study examined the feasibility of using Facebook advertisements to recruit parent caregivers of children and teenagers with cancer. We also explored the feasibility of Web-based video recording in pediatric palliative care populations by surveying parents of children with cancer regarding (a) their preferences for research methods and (b) technological capabilities of their computers and phones. Facebook's paid advertising program was used to recruit parent caregivers of children currently living with cancer to complete an electronic survey about research preferences and technological capabilities. The advertising campaign generated 3 897 981 impressions, which resulted in 1050 clicks at a total cost of $1129.88. Of 284 screened individuals, 106 were eligible. Forty-five caregivers of children with cancer completed the entire electronic survey. Parents preferred and had technological capabilities for Web-based and electronic research methods. Participant survey responses are reported. Facebook was a useful, cost-effective method to recruit a diverse sample of parent caregivers of children with cancer. Web-based video recording and data collection may be feasible and desirable in samples of children with cancer and their families. Web-based methods (eg, Facebook, Skype) may enhance communication and access between nurses and pediatric oncology patients and their families.

Technology Development and Demonstration Concepts for the Space Elevator

NASA Technical Reports Server (NTRS)

Smitherman, David V., Jr.

2004-01-01

During the 1990s several discoveries and advances in the development of carbon nano-tube (CNT) materials indicated that material strengths many times greater than common high-strength composite materials might be possible. Progress in the development of this material led to renewed interest in the space elevator concept for construction of a tether structure from the surface of the Earth through a geostationary orbit (GEO) and thus creating a new approach to Earth-to-orbit transportation infrastructures. To investigate this possibility the author, in 1999, managed for NASA a space elevator work:hop at the Marshall Space Flight Center to explore the potential feasibility of space elevators in the 21 century, and to identify the critical technologies and demonstration missions needed to make development of space elevators feasible. Since that time, a NASA Institute for Advanced Concepts (NIAC) funded study of the Space Elevator proposed a concept for a simpler first space elevator system using more near-term technologies. This paper will review some of the latest ideas for space elevator development, the critical technologies required, and some of the ideas proposed for demonstrating the feasibility for full-scale development of an Earth to GEO space elevator. Critical technologies include CNT composite materials, wireless power transmission, orbital object avoidance, and large-scale tether deployment and control systems. Numerous paths for technology demonstrations have been proposed utilizing ground experiments, air structures. LEO missions, the space shuttle, the international Space Station, GEO demonstration missions, demonstrations at the lunar L1 or L2 points, and other locations. In conclusion, this paper finds that the most critical technologies for an Earth to GEO space elevator include CNT composite materials development and object avoidance technologies; that lack of successful development of these technologies need not preclude continued development of space elevator systems in general; and that the critical technologies required for the Earth to GEO space elevator are not required for similar systems at the Moon, Mars, Europa, or for orbital tether systems at GEO, Luna, and other locations.

SURFACTANTS AND SUBSURFACE REMEDIATION

EPA Science Inventory

Because of the limitations of pump-and-trat technology, attention is now focused on the feasibility of surfactant use to increase its efficiency. Surfactants have been studied for use in soil washing and enhanced oil recovery. Although similarities exist between the application...

Study of the photovoltaic effect in thin film barium titanate

NASA Technical Reports Server (NTRS)

Grannemann, W. W.; Dharmadhikari, V. S.

1983-01-01

The feasibility of making non-volatile digital memory devices of barium titanate, BaTiO3, that are integrated onto a silicon substrate with the required ferroelectric film produced by processing, compatible with silicon technology was examined.

Feasibility study of RFID technology for construction load tracking.

DOT National Transportation Integrated Search

2010-12-01

ADOT&PF is seeking more efficient business practices and processes to increase its speed in delivering supplies to work sites, optimize the workforce, and minimize : costs. The current tracking process uses a computer-generated ticket carried by the ...

The Development of Environmentally Friendly Technologies of Using Coals and Products of Their Enrichment in the Form of Coal Water Slurries

NASA Astrophysics Data System (ADS)

Murko, Vasily; Hamalainen, Veniamin

2017-11-01

The article presents the current state of the technology for production and combustion of fuel coal water slurries in Russia and foreign countries. Experimental and industrial facilities show the technological and economic efficiency of using this technology for disposal of wastes resulting after coal processing and enrichment. The feasibility studies of use of the technology at large Kuzbass thermal power stations are presented. The possibility of solving a serious environmental problem of reducing storage of the most toxic waste of coal enrichment in the location areas of coal washing plants and coal mining enterprises is demonstrated.

[Optimization of Extraction Technology for Sericin from Silkworm Cocoon with Orthogonal Design].

PubMed

Zhao, Chun-ying; Wang, Yan; Li, Yun-feng; Chen, Zhi-hong

2015-05-01

To optimize the appropriate extracting technology for sericin from Silkworm cocoon. Using sericin extraction rates and sericin content as the indices. The single and orthogonal experiments were used to determine the best conditions. The optimal extraction technology for sericin from Silkworm cocoon was as follows: 1: 30 for the ratio of solid to liquid, 3 h reflux for 2 times of extraction and water temperature at 100 degrees C. The extraction rate of sericin from Silkworm cocoon was 27.1%. The optimal extraction technology is stable, feasible, and can provide reference for further pharmacological study on cocoon sericin.

Rehabilitation technologies and interventions for individuals with spinal cord injury: translational potential of current trends.

PubMed

Musselman, Kristin E; Shah, Meeral; Zariffa, José

2018-05-16

In the past, neurorehabilitation for individuals with neurological damage, such as spinal cord injury (SCI), was focused on learning compensatory movements to regain function. Presently, the focus of neurorehabilitation has shifted to functional neurorecovery, or the restoration of function through repetitive movement training of the affected limbs. Technologies, such as robotic devices and electrical stimulation, are being developed to facilitate repetitive motor training; however, their implementation into mainstream clinical practice has not been realized. In this commentary, we examined how current SCI rehabilitation research aligns with the potential for clinical implementation. We completed an environmental scan of studies in progress that investigate a physical intervention promoting functional neurorecovery. We identified emerging interventions among the SCI population, and evaluated the strengths and gaps of the current direction of SCI rehabilitation research. Seventy-three study postings were retrieved through website and database searching. Study objectives, outcome measures, participant characteristics and the mode(s) of intervention being studied were extracted from the postings. The FAME (Feasibility, Appropriateness, Meaningfulness, Effectiveness, Economic Evidence) Framework was used to evaluate the strengths and gaps of the research with respect to likelihood of clinical implementation. Strengths included aspects of Feasibility, as the research was practical, aspects of Appropriateness as the research aligned with current scientific literature on motor learning, and Effectiveness, as all trials aimed to evaluate the effect of an intervention on a clinical outcome. Aspects of Feasibility were also identified as a gap; with two thirds of the studies examining emerging technologies, the likelihood of successful clinical implementation was questionable. As the interventions being studied may not align with the preferences of clinicians and priorities of patients, the Appropriateness of these interventions for the current health care environment was questioned. Meaningfulness and Economic Evidence were also identified as gaps since few studies included measures reflecting the perceptions of the participants or economic factors, respectively. The identified gaps will likely impede the clinical uptake of many of the interventions currently being studied. Future research may lessen these gaps through a staged approach to the consideration of the FAME elements as novel interventions and technologies are developed, evaluated and implemented.

Feasibility of remotely manipulated welding in space: A step in the development of novel joining technologies

NASA Technical Reports Server (NTRS)

Masubuchi, K.; Agapakis, J. E.; Debiccari, A.; Vonalt, C.

1985-01-01

A six month research program entitled Feasibility of Remotely Manipulated Welding in Space - A Step in the Development of Novel Joining Technologies is performed at the Massachusetts Institute of Technology for the Office of Space Science and Applications, NASA, under Contract No. NASW-3740. The work is performed as a part of the Innovative Utilization of the Space Station Program. The final report from M.I.T. was issued in September 1983. This paper presents a summary of the work performed under this contract. The objective of this research program is to initiate research for the development of packaged, remotely controlled welding systems for space construction and repair. The research effort includes the following tasks: (1) identification of probable joining tasks in space; (2) identification of required levels of automation in space welding tasks; (3) development of novel space welding concepts; (4) development of recommended future studies; and (5) preparation of the final report.

Study on GIS-based sport-games information system

NASA Astrophysics Data System (ADS)

Peng, Hongzhi; Yang, Lingbin; Deng, Meirong; Han, Yongshun

2008-10-01

With the development of internet and such info-technologies as, Information Superhighway, Computer Technology, Remote Sensing(RS), Global Positioning System(GPS), Digital Communication and National Information Network(NIN),etc. Geographic Information System (GIS) becomes more and more popular in fields of science and industries. It is not only feasible but also necessary to apply GIS to large-scale sport games. This paper firstly discussed GIS technology and its application, then elaborated on the frame and content of Sport-Games Geography Information System(SG-GIS) with the function of gathering, storing, processing, sharing, exchanging and utilizing all kind of spatial-temporal information about sport games, and lastly designed and developed a public service GIS for the 6th Asian Winter Games in Changchun, China(CAWGIS). The application of CAWGIS showed that the established SG-GIS was feasible and GIS-based sport games information system was able to effectively process a large amount of sport-games information and provide the real-time sport games service for governors, athletes and the public.

Technical and Economic Assessment of Span-Loaded Cargo Aircraft Concepts

NASA Technical Reports Server (NTRS)

1976-01-01

The benefits are assessed of span distributed loading concepts as applied to future commercial air cargo operations. A two phased program is used to perform this assessment. The first phase consists of selected parametric studies to define significant configuration, performance, and economic trends. The second phase consists of more detailed engineering design, analysis, and economic evaluations to define the technical and economic feasibility of a selected spanloader design. A conventional all-cargo aircraft of comparable technology and size is used as a comparator system. The technical feasibility is demonstrated of the spanloader concept with no new major technology efforts required to implement the system. However, certain high pay-off technologies such as winglets, airfoil design, and advanced structural materials and manufacturing techniques need refinement and definition prior to application. In addition, further structural design analysis could establish the techniques and criteria necessary to fully capitalize upon the high degree of structural commonality and simplicity inherent in the spanloader concept.

Generation of control sequences for a pilot-disassembly system

NASA Astrophysics Data System (ADS)

Seliger, Guenther; Kim, Hyung-Ju; Keil, Thomas

2002-02-01

Closing the product and material cycles has emerged as a paradigm for industry in the 21st century. Disassembly plays a key role in a life cycle economy since it enables the recovery of resources. A partly automated disassembly system should adapt to a large variety of products and different degrees of devaluation. Also the amounts of products to be disassembled can vary strongly. To cope with these demands an approach to generate on-line disassembly control sequences will be presented. In order to react on these demands the technological feasibility is considered within a procedure for the generation of disassembly control sequences. Procedures are designed to find available and technologically feasible disassembly processes. The control system is formed by modularised and parameterised control units in the cell level within the entire control architecture. In the first development stage product and process analyses at the sample product washing machine were executed. Furthermore a generalized disassembly process was defined. Afterwards these processes were structured in primary and secondary functions. In the second stage the disassembly control at the technological level was investigated. Factors were the availability of the disassembly tools and the technological feasibility of the disassembly processes within the disassembly system. Technical alternative disassembly processes are determined as a result of availability of the tools and technological feasibility of processes. The fourth phase was the concept for the generation of the disassembly control sequences. The approach will be proved in a prototypical disassembly system.

Feasibility of interactive technology for symptom monitoring in patients with fibromyalgia.

PubMed

Vanderboom, Catherine E; Vincent, Ann; Luedtke, Connie A; Rhudy, Lori M; Bowles, Kathryn H

2014-09-01

Use of health information technology (IT) integrated with clinical services has the potential to empower self-management and decrease health care utilization for chronic disorders such as fibromyalgia (FM). However, the appropriate methodology that systematically facilitates the integration of health IT with clinical services between patients and nurses partnering to manage FM is unclear. The purpose of this study was to determine the feasibility of technology-enhanced monitoring that engages FM patients using a mobile device. A quantitative and qualitative descriptive design was used in a convenience sample of 20 FM patients. Patients used a mobile monitoring device for one week; nurses responded to patient e-mailed symptom reports on a daily basis. Analysis was primarily descriptive-percent, frequencies, and means for individual questionnaire items and subscales were calculated. For qualitative data, a 1 hour focus group was audio-recorded, transcribed verbatim, and then analyzed using content analysis. All participants used a mobile phone in their daily lives; half used a smart phone. Participants were interested in using a smart phone to monitor their health and to communicate with health care providers. Participants used the study mobile device an average of 5.2 days out of the 7 day study period. Most participants (80%) reported that monitoring symptoms using the device was easy to do. Sixty-five percent felt that using the device helped them to promptly address their symptoms. Results from this study indicated that health IT integrated with clinical services is feasible to monitor FM symptoms and to communicate with the care team. Copyright © 2014 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

Overview of technology modeling in the Remedial Action Assessment System (RAAS)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, C.D.; Bagaasen, L.M.; Chan, T.C.

1994-08-01

There are numerous hazardous waste sites under the jurisdiction of the US Department of Energy (DOE). To assist the cleanup of these sites in a more consistent, timely, and cost-effective manner, the Remedial Action Assessment System (RAAS) is being developed by the Pacific Northwest Laboratory (PNL). RAAS is a software tool designed to automate the initial technology selection within the remedial investigation/feasibility study (RI/FS) process. The software does several things for the user: (1) provides information about available remedial technologies, (2) sorts possible technologies to recommend a list of technologies applicable to a given site, (3) points out technical issuesmore » that may prevent the implementation of a technology, and (4) provides an estimate of the effectiveness of a given technology at a particular site. Information from RAAS can be used to compare remediation options and guide selection of technologies for further study.« less

A Description of Older Adults' Participation in a Technology-Based Piano Program and Their Musical Skill Development, Perceptions of Personal Fulfillment, and Attitudes toward Music Learning

ERIC Educational Resources Information Center

Mitak, Kirsten Nora

2012-01-01

The purpose of this study was to determine the feasibility of Piano Wizard(TM) as a viable technological and instructional tool for older adults. Piano Wizard's applicability for seniors was determined by participants' musical skill development, perceptions of personal fulfillment, attitudes toward music learning, and opinions about the…

Feasibility of Renewable Energy Technology at the Afghanistan National Security University: A Site-Specific Study Focused on Potential Renewable Energy Technologies in Northwest Kabul, Afghanistan

DTIC Science & Technology

2011-04-26

70% H2, O2 Proton exchange membrane fuel cell ( PEMFC ) Proton exchange membrane Rm temp to 80 °C 40–60% H2, O2, Air Direct methanol fuel cell...Cell PEMFC Proton Exchange Membrane Fuel Cell PV Photovoltaic SHGC Solar Heat Gain Coefficient SIR savings to investment ratio SOFC Solid Oxide

Effectiveness and feasibility of utilizing E4D technology as a teaching tool in a preclinical dental education environment.

PubMed

Callan, Richard S; Palladino, Christie L; Furness, Alan R; Bundy, Emily L; Ange, Brittany L

2014-10-01

Recent efforts have been directed towards utilizing CAD/CAM technology in the education of future dentists. The purpose of this pilot study was to investigate the feasibility of implementing CAD/CAM technology in instruction on preparing a tooth for restoration. Students at one dental school were assigned access to CAD/CAM technology vs. traditional preparation methods in a randomized, crossover design. In a convenience sample of a second-year class, seventy-six of the seventy-nine students volunteered to participate, for a response rate of 96 percent. Two analyses were performed on this pilot data: a primary effectiveness analysis comparing students' competency exam scores by intervention group (intention-to-treat analysis) and a secondary efficacy analysis comparing competency exam scores among students who reported using CAD/CAM versus those who did not. The effectiveness analysis showed no difference in outcomes by intervention group assignment. While student survey results indicated interest in utilizing the technology, the actual utilization rate was much less than one might anticipate, yielding a sample size that limited statistical power. The secondary analysis demonstrated higher mean competency exam scores for students reporting use of CAD/CAM compared to those who did not use the technology, but these results did not reach statistical significance (p=0.075). Prior research has investigated the efficacy of CAD/CAM in a controlled educational trial, but this study adds to the literature by investigating student use of CAD/CAM in a real-world, self-study fashion. Further studies should investigate ways in which to increase student utilization of CAD/CAM and whether or not increased utilization, with a larger sample size, would yield significant outcomes.

Thailand national programme of the Earth Resources Technology Satellite

NASA Technical Reports Server (NTRS)

Sabhasri, S. (Principal Investigator)

1976-01-01

The author has identified the following significant results. The study on locating hill tribe villages from LANDSAT imagery was successful and exceeded the initial expectations. Results of the study on land use and forest mapping using Skylab data demonstrated the capability and feasibility of large scale mapping with high accuracy.

Using fiber-optic sensor technology to measure strains under the asphalt layer of a flexible pavement structure.

DOT National Transportation Integrated Search

2006-01-01

In this study, a flexible pavement system was instrumented using fiber-optic strain sensors (FOSS). The purpose of this study was to demonstrate the feasibility of a FOSS installation, monitor the long-term strains under repeated traffic loading, and...

6 CFR 25.6 - Procedures for designation of qualified anti-terrorism technologies.

Code of Federal Regulations, 2010 CFR

2010-01-01

... available or can be feasibly conducted or obtained, including test results produced by an independent laboratory or other entity engaged to test or verify the safety, utility, performance, in order to assess the...; (ii) Classified and otherwise confidential studies; (iii) Studies, tests, or other performance records...

6 CFR 25.6 - Procedures for designation of qualified anti-terrorism technologies.

Code of Federal Regulations, 2014 CFR

2014-01-01

... available or can be feasibly conducted or obtained, including test results produced by an independent laboratory or other entity engaged to test or verify the safety, utility, performance, in order to assess the...; (ii) Classified and otherwise confidential studies; (iii) Studies, tests, or other performance records...

Weblog Publishing Behaviour of Librarianship and Information Science Students: A Case Study

ERIC Educational Resources Information Center

Tramullas, Jesus; Garrido, Piedad

2011-01-01

Introduction: The "blogosphere" is a space with digital information in which social networks form that offer countless application possibilities. In this technology-mediated context, it is feasible to study the performance and approaches of production, diffusion, relationship and use of information from different perspectives. Method: Quantitative…

76 FR 44463 - Children's Products Containing Lead; Technological Feasibility of 100 ppm for Lead Content...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-26

...Section 101(a) of the Consumer Product Safety Improvement Act (``CPSIA'') provides that, as of August 14, 2011, children's products may not contain more than 100 parts per million (``ppm'') of lead unless the Consumer Product Safety Commission (``CPSC,'' ``Commission,'' or ``we'') determines that such a limit is not technologically feasible. The determination can only be made after notice and a hearing and after analyzing the public health protections associated with substantially reducing lead in children's products. On February 16, 2011, we conducted a public hearing to receive views from all interested parties about the technological feasibility of meeting the 100 ppm lead content limit for children's products and associated public health considerations. Through this document, we announce that children's products must meet the statutory 100 ppm lead content limit on August 14, 2011, unless otherwise excluded under CPSC regulations.\\1\\ ---------------------------------------------------------------------------

The feasibility, acceptability and preliminary efficacy of a low-cost, virtual-reality based, upper-limb stroke rehabilitation device: a mixed methods study.

PubMed

Warland, Alyson; Paraskevopoulos, Ioannis; Tsekleves, Emmanuel; Ryan, Jennifer; Nowicky, Alexander; Griscti, Josephine; Levings, Hannah; Kilbride, Cherry

2018-04-12

To establish feasibility, acceptability, and preliminary efficacy of an adapted version of a commercially available, virtual-reality gaming system (the Personalised Stroke Therapy system) for upper-limb rehabilitation with community dwelling stroke-survivors. Twelve stroke-survivors (nine females, mean age 58 years, [standard deviation 7.1], median stroke chronicity 42 months [interquartile range 34.7], Motricity index 14-25 for shoulder and elbow) were asked to complete nine, 40-min intervention sessions using two activities on the system over 3 weeks. Feasibility and acceptability were assessed through a semi-structured interview, recording of adverse effects, adherence, enjoyment (using an 11-point Likert scale), and perceived exertion (using the BORG scale). Assessments of impairment (Fugl-Meyer Assessment Upper extremity), activity (ABILHAND, Action Research Arm Test, Motor Activity Log-28), and participation (Subjective Index of Physical and Social Outcome) were completed at baseline, following intervention, and at 4-week follow-up. Data were analysed using Thematic Analysis of interview and intervention field-notes and Wilcoxon Signed Ranks. Side-by-side displays were used to integrate findings. Participants received between 175 and 336 min of intervention. Thirteen non-serious adverse effects were reported by five participants. Participants reported a high level of enjoyment (8.1 and 6.8 out of 10) and rated exertion between 11.6 and 12.9 out of 20. Themes of improvements in impairments and increased spontaneous use in functional activities were identified and supported by improvements in all outcome measures between baseline and post-intervention (p < 0.05 for all measures). Integrated findings suggested that the system is feasible and acceptable for use with a group of community-dwelling stroke-survivors including those with moderately-severe disability. Implications for rehabilitation To ensure feasibility of use and maintenance of an appropriate level of challenge, gaming technologies for use in upper-limb stroke rehabilitation should be personalised, dependent on individual need. Through the use of hands-free systems and personalisation, stroke survivors with moderate and moderately-severe levels of upper-limb impairment following stroke are able to use gaming technologies as a means of delivering upper-limb rehabilitation. Future studies should address issues of acceptability, feasibility, and efficacy of personalised gaming technologies for delivery of upper-limb stroke rehabilitation in the home environment. Findings from this study can be used to develop future games and activities suitable for use in stroke rehabilitation.

Investigate feasibility of using ground penetrating radar in QC/QA of rubblization projects.

DOT National Transportation Integrated Search

2011-07-01

This study investigated if Ground Penetrating Radar can offer a suitable technology for mapping the physical condition of fractured slab rapidly, particularly under the steel reinforcement, without disturbing the fractured layer. A 4000 long compo...

Charge Density Engineering: A Feasibility Study

DTIC Science & Technology

2013-11-22

15. Statistical Learning Guided Design of Materials Fritz Haber Institute – Theory Group Berlin , Germany June 17th 2013 16...Technology San Diego, CA June 6th 2013 15. Statistical Learning Guided Design of Materials Fritz Haber Institute – Theory Group Berlin

78 FR 24156 - Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Indian tribes. The grant recipients shall use the grant funds for feasibility studies, design assistance... CONTACT: Michele L. Brooks, Director, Program Development and Regulatory Analysis, Rural Utilities Service..., including through the use of appropriate automated, electronic, mechanical, or other technological...

JPRS Report Science & Technology, Europe

DTIC Science & Technology

1991-08-22

MHS has already been manu- facturing two other components developed by CNET which have proved to be indispensable companions of the CTA4 for...SSGRR Alcatel-Face Standard, Sistema , Telettra Network-related problem areas Feasibility study of an ATM system via satellite Participants

Implementation of a Regional Virtual Tumor Board: A Prospective Study Evaluating Feasibility and Provider Acceptance

PubMed Central

Marshall, Christy L.; Petersen, Nancy J.; Naik, Aanand D.; Velde, Nancy Vander; Artinyan, Avo; Albo, Daniel; Berger, David H.

2014-01-01

Abstract Background: Tumor board (TB) conferences facilitate multidisciplinary cancer care and are associated with overall improved outcomes. Because of shortages of the oncology workforce and limited access to TB conferences, multidisciplinary care is not available at every institution. This pilot study assessed the feasibility and acceptance of using telemedicine to implement a virtual TB (VTB) program within a regional healthcare network. Materials and Methods: The VTB program was implemented through videoconference technology and electronic medical records between the Houston (TX) Veterans Affairs Medical Center (VAMC) (referral center) and the New Orleans (LA) VAMC (referring center). Feasibility was assessed as the proportion of completed VTB encounters, rate of technological failures/mishaps, and presentation duration. Validated surveys for confidence and satisfaction were administered to 36 TB participants to assess acceptance (1–5 point Likert scale). Secondary outcomes included preliminary data on VTB utilization and its effectiveness in providing access to quality cancer care within the region. Results: Ninety TB case presentations occurred during the study period, of which 14 (15%) were VTB cases. Although one VTB encounter had a technical mishap during presentation, all scheduled encounters were completed (100% completion rate). Case presentations took longer for VTB than for regular TB cases (p=0.0004). However, VTB was highly accepted with mean scores for satisfaction and confidence of 4.6. Utilization rate of VTB was 75%, and its effectiveness was equivalent to that observed for non-VTB cases. Conclusions: Implementation of VTB is feasible and highly accepted by its participants. Future studies should focus on widespread implementation and validating the effectiveness of this model. PMID:24845366

DRACO Flowpath Performance and Environments

NASA Technical Reports Server (NTRS)

Komar, D. R.; McDonald, Jon

1999-01-01

The Advanced Space Transportation (AST) project office has challenged NASA to design, manufacture, ground-test and flight-test an axisymmetric, hydrocarbon-fueled, flight-weight, ejector-ramjet engine system testbed no later than 2005. To accomplish this, a multi-center NASA team has been assembled. The goal of this team, led by NASA-Marshall Space Flight Center (MSFC), is to develop propulsion technologies that demonstrate rocket and airbreathing combined-cycle operation (DRACO). Current technical activities include flowpath conceptual design, engine systems conceptual design, and feasibility studies investigating the integration and operation of the DRACO engine with a Lockheed D-21B drone. This paper focuses on the activities of the Flowpath Systems Product Development Team (PDT), led by NASA-Glenn Research Center (GRC) and supported by NASA-MSFC and TechLand Research, Inc. The objective of the Flowpath PDT at the start of the DRACO program was to establish a conceptual design of the flowpath aerodynamic lines, determine the preliminary performance, define the internal environments, and support the DRACO testbed concept feasibility studies. To accomplish these tasks, the PDT convened to establish a baseline flowpath concept. With the conceptual lines defined, cycle analysis tasks were planned and the flowpath performance and internal environments were defined. Additionally, sensitivity studies investigating the effects of inlet reference area, combustion performance, and combustor/nozzle materials selection were performed to support the Flowpath PDT design process. Results of these tasks are the emphasis of this paper and are intended to verify the feasibility of the DRACO flowpath and engine system as well as identify the primary technical challenges inherent in the flight-weight design of an advanced propulsion technology demonstration engine. Preliminary cycle performance decks were developed to support the testbed concept feasibility studies but are not discussed further in this paper.

X-43D Conceptual Design and Feasibility Study

NASA Technical Reports Server (NTRS)

Johnson, Donald B.; Robinson, Jeffrey S.

2005-01-01

NASA s Next Generation Launch Technology (NGLT) Program, in conjunction with the office of the Director of Defense Research and Engineering (DDR&E), developed an integrated hypersonic technology demonstration roadmap. This roadmap is an integral part of the National Aerospace Initiative (NAI), a multi-year, multi-agency cooperative effort to invest in and develop, among other things, hypersonic technologies. This roadmap contains key ground and flight demonstrations required along the path to developing a reusable hypersonic space access system. One of the key flight demonstrations required for systems that will operate in the high Mach number regime is the X-43D. As currently conceived, the X-43D is a Mach 15 flight test vehicle that incorporates a hydrogen-fueled scramjet engine. The purpose of the X-43D is to gather high Mach number flight environment and engine operability information which is difficult, if not impossible, to gather on the ground. During 2003, the NGLT Future Hypersonic Flight Demonstration Office initiated a feasibility study on the X-43D. The objective of the study was to develop a baseline conceptual design, assess its performance, and identify the key technical issues. The study also produced a baseline program plan, schedule, and cost, along with a list of key programmatic risks.

Digital technology to facilitate Proactive Assessment of Obesity Risk during Infancy (ProAsk): a feasibility study

PubMed Central

Rose, Jennie; Ablewhite, Joanne; Swift, Judy Anne; Nathan, Dilip; Atkinson, Pippa; Watson, Vicki; McMaster, Fiona

2017-01-01

Objective To assess the feasibility and acceptability of using digital technology for Proactive Assessment of Obesity Risk during Infancy (ProAsk) with the UK health visitors (HVs) and parents. Design Multicentre, pre- and post-intervention feasibility study with process evaluation. Setting Rural and urban deprived settings, UK community care. Participants 66 parents of infants and 22 HVs. Intervention ProAsk was delivered on a tablet device. It comprises a validated risk prediction tool to quantify overweight risk status and a therapeutic wheel detailing motivational strategies for preventive parental behaviour. Parents were encouraged to agree goals for behaviour change with HVs who received motivational interviewing training. Outcome measures We assessed recruitment, response and attrition rates. Demographic details were collected, and overweight risk status. The proposed primary outcome measure was weight-for-age z-score. The proposed secondary outcomes were parenting self-efficacy, maternal feeding style, infant diet and exposure to physical activity/sedentary behaviour. Qualitative interviews ascertained the acceptability of study processes and intervention fidelity. Results HVs screened 324/589 infants for inclusion in the study and 66/226 (29%) eligible infants were recruited. Assessment of overweight risk was completed on 53 infants and 40% of these were identified as above population risk. Weight-for-age z-score (SD) between the infants at population risk and those above population risk differed significantly at baseline (−0.67 SD vs 0.32 SD). HVs were able to collect data and calculate overweight risk for the infants. Protocol adherence and intervention fidelity was a challenge. HVs and parents found the information provided in the therapeutic wheel appropriate and acceptable. Conclusion Study recruitment and protocol adherence were problematic. ProAsk was acceptable to most parents and HVs, but intervention fidelity was low. There was limited evidence to support the feasibility of implementing ProAsk without significant additional resources. A future study could evaluate ProAsk as a HV-supported, parent-led intervention. Trial registration number NCT02314494 (Feasibility Study Results) PMID:28882926

Study protocol: mobile improvement of self-management ability through rural technology (mI SMART).

PubMed

Mallow, Jennifer A; Theeke, Laurie A; Long, Dustin M; Whetsel, Tara; Theeke, Elliott; Mallow, Brian K

2015-01-01

There are 62 million Americans currently residing in rural areas who are more likely to have multiple chronic conditions and be economically disadvantaged, and in poor health, receive less recommended preventive services and attend fewer visits to health care providers. Recent advances in mobile healthcare (mHealth) offer a promising new approach to solving health disparities and improving chronic illness care. It is now possible and affordable to transmit health information, including values from glucometers, automated blood pressure monitors, and scales, through Bluetooth-enabled devices. Additionally, audio and video communications technologies can allow healthcare providers to conduct many parts of a physical exam remotely from varied settings. These technologies could remove geographical distance as a barrier to care and diminish the access to care issues faced by patients who live rurally. However, currently there is lack of studies that provide evidence of feasibility, acceptability, and effectiveness of mHealth initiatives on improved outcomes of care, a needed step to make the translation to implementation studies in healthcare systems. The purpose of this paper is to present the protocol for the first study of mI SMART (mobile Improvement of Self-Management Ability through Rural Technology), a new integrated mHealth intervention. Our objective is to provide evidence of feasibility and acceptability for the use of mI SMART in an underserved population and establish evidence for the refinement of mI SMART. The proposed study will take place at Milan Puskar Health Right, a free primary care clinic in the state of West Virginia. The clinic provides health care at no cost to uninsured, low income; adults aged 18-64 living in West Virginia. We will enroll 30 participants into this feasibility study with plans of implementing a longitudinal randomized, comparative effectiveness design in the future. Data collection will include tracking of barriers and facilitators to using mI SMART on patient and provider feedback surveys, tracking of patient-provider communications, self-reports from patients on quality of life, adherence, and self-management ability, and capture of health record data on chronic illness measures. We expect that the mI SMART intervention, refined from participant and provider feedback, will be acceptable and feasible. We anticipate high patient-provider satisfaction, enhanced patient-provider communication, and improved health related quality of life, adherence to treatment, and self-management ability. In addition, we hypothesize that patients who use mI SMART will demonstrate improved physical outcomes such as blood glucose, blood pressure, and weight.

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age

PubMed Central

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-01-01

Summary To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. In order to adequately meet the mental health needs of today’s society, psychiatry must engage in rigorous assessment of the impact of digital technologies. PMID:26932479

Interconnected or disconnected? Promotion of mental health and prevention of mental disorder in the digital age.

PubMed

Hayes, Joseph F; Maughan, Daniel L; Grant-Peterkin, Hugh

2016-03-01

To date there have been few peer-reviewed studies on the feasibility, acceptability and effectiveness of digital technologies for mental health promotion and disorder prevention. Any evaluation of these evolving technologies is complicated by a lack of understanding about the specific risks and possible benefits of the many forms of internet use on mental health. To adequately meet the mental health needs of today's society, psychiatry must engage in rigorous assessment of the impact of digital technologies. © The Royal College of Psychiatrists 2016.

Upper limb motor training using a Saebo™ orthosis is feasible for increasing task-specific practice in hospital after stroke.

PubMed

Lannin, Natasha A; Cusick, Anne; Hills, Caroline; Kinnear, Bianca; Vogel, Karin; Matthews, Kate; Bowring, Greg

2016-12-01

Assistive technologies have the potential to increase the amount of movement practice provided during inpatient stroke rehabilitation. The primary aim of this study was to investigate the feasibility of using the Saebo-Flex ™ device in a subacute stroke setting to increase task-specific practice for people with little or no active hand movement. The secondary aim was to collect preliminary data comparing hand/upper limb function between a control group that received usual rehabilitation and an intervention group that used, in addition, the Saebo-Flex ™ device. Nine inpatients (mean three months (median six weeks) post-stroke) participated in this feasibility study conducted in an Australian rehabilitation setting, using a randomised pre-test and post-test design with concealed allocation and blinded outcome assessment. In addition to usual rehabilitation, the intervention group received eight weeks of daily motor training using the Saebo-Flex ™ device. The control group received usual rehabilitation (task-specific motor training) only. Participants were assessed at baseline (pre-randomisation) and at the end of the eight-week study period. Feasibility was assessed with respect to ease of recruitment, application of the device, compliance with the treatment programme and safety. Secondary outcome measures included the Motor Assessment Scale (upper limb items), Box and Block Test, grip strength and the Stroke Impact Scale. Recruitment to the study was very slow because of the low number of patients with little or no active hand movement. Otherwise, the study was feasible in terms of being able to apply the Saebo-Flex ™ device and compliance with the treatment programme. There were no adverse events, and a greater amount of upper limb rehabilitation was provided to the intervention group. While there were trends in favour of the intervention group, particularly for dexterity, no between-group differences were seen for any of the secondary outcomes. This pilot feasibility study showed that the use of assistive technology, specifically the Saebo-Flex ™ device, could be successfully used in a sample of stroke patients with little or no active hand movement. However, recruitment to the trial was very slow. The use of the Saebo-Flex TM device had variable results on outcomes, with some positive trends seen in hand function, particularly dexterity. © 2016 Occupational Therapy Australia.

Older patients' use of technology for a post-discharge nutritional intervention - A mixed-methods feasibility study.

PubMed

Lindhardt, T; Nielsen, M H

2017-01-01

Malnutrition is frequent in older people and a precursor for morbidity and hospitalisation; furthermore low intake and weight loss during and after hospitalisation is well-described. Such patients are often excluded from technology projects on account of lack of skills. This is a barrier for their access to many current and future health care offers. To test the acceptability, feasibility and preliminary efficacy of technology-supported energy- and protein-enforced homedelivered meals for older patients discharged from hospital. Mixed method design including a quasi-experimental controlled feasibility trial and embedded qualitative interviews. Older medical patients (mean age 79.4 years; women 66.7%) at nutritional risk and discharged to own home were included consecutively to first the control group (n=18) and later the intervention group (n=18). Nine intervention and 16 control group patients completed the project. Intervention: group received: 1) enriched meals delivered to participants' homes 12 weeks after discharge, and 2) a tablet computer combining goal setting for intake with self-monitoring and feedback. Control group were treated as usual. Data collection was done at baseline, and at six and 12 weeks follow-up. Feasibility evaluation focused on 1) inclusion and retention and 2) acceptability and functionality of the intervention. Efficacy primary endpoint: Muscle strength and BMI. Secondary: Health related quality of life (HRQoL), depression; readmissions, mortality. Technology challenges were related to immaturity of the out-of hospital app version; however, participants were motivated and capable of using the device. Inclusion and retention was challenged by the acceptability of the nutritional intervention and exhaustion among patients. Mortality was high. Although weaker at baseline the intervention group increased their muscle strength more consistently than did the control group: Handgrip strength with 2.5kg vs 0.9kg and chairto-stand-test with 3.3 vs. 1.8 times. They also improved their depression score and HRQoL more, and patients reported increased intake, appetite, and energy in the interviews. Relatives confirmed this and also reported positive impact on their level of worry and on the relationship with the older person. The study provided valuable insight into appropriate methods and procedures as well as older people's preferences and views on barriers to successful intervention and use of technology in health care. This will guide the design of a future sufficiently powered study. Effect evaluation provided guidance for future sample size calculation. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Reciprocity-based experimental determination of dynamic forces and moments: A feasibility study

NASA Technical Reports Server (NTRS)

Ver, Istvan L.; Howe, Michael S.

1994-01-01

BBN Systems and Technologies has been tasked by the Georgia Tech Research Center to carry Task Assignment No. 7 for the NASA Langley Research Center to explore the feasibility of 'In-Situ Experimental Evaluation of the Source Strength of Complex Vibration Sources Utilizing Reciprocity.' The task was carried out under NASA Contract No. NAS1-19061. In flight it is not feasible to connect the vibration sources to their mounting points on the fuselage through force gauges to measure dynamic forces and moments directly. However, it is possible to measure the interior sound field or vibration response caused by these structureborne sound sources at many locations and invoke principle of reciprocity to predict the dynamic forces and moments. The work carried out in the framework of Task 7 was directed to explore the feasibility of reciprocity-based measurements of vibration forces and moments.

Summary of Recent Results from NASA's Space Solar Power (SSP) Programs and the Current Capabilities of Microwave WPT Technology

NASA Technical Reports Server (NTRS)

McSpadden, James; Mankins, John C.; Howell, Joe T. (Technical Monitor)

2002-01-01

The concept of placing enormous solar power satellite (SPS) systems in space represents one of a handful of new technological options that might provide large-scale, environmentally clean base load power into terrestrial markets. In the US, the SPS concept was examined extensively during the late 1970s by the U.S. Department of Energy (DOE) and the National Aeronautics and Space Administration (NASA). More recently, the subject of space solar power (SSP) was reexamined by NASA from 1995-1997 in the "fresh look" study, and during 1998 in an SSP "concept definition study". As a result of these efforts, in 1999-2000, NASA undertook the SSP Exploratory Research and Technology (SERT) program which pursued preliminary strategic technology research and development to enable large, multi-megawatt SSP systems and wireless power transmission (WPT) for government missions and commercial markets (in-space and terrestrial). During 2001-2002, NASA has been pursuing an SSP Concept and Technology Maturation (SCTM) program follow-on to the SERT, with special emphasis on identifying new, high-leverage technologies that might advanced the feasibility of future SSP systems. In addition, in 2001, the U.S. National Research Council (NRC) released a major report providing the results of a peer review of NASA's SSP strategic research and technology (R&T) road maps. One of the key technologies needed to enable the future feasibility of SSP/SPS is that of wireless power transmission. Advances in phased array antennas and rectennas have provided the building blocks for a realizable WPT system. These key components include the dc-RF converters in the transmitter, the retrodirective beam control system, and the receiving rectenna. Each subject is briefly covered, and results from the SERT program that studied a 5.8 GHz SPS system are presented. This paper presents a summary results from NASA's SSP efforts, along with a summary of the status of microwave WPT technology development.

Radioisotope Electric Propulsion Missions Utilizing a Common Spacecraft Design

NASA Technical Reports Server (NTRS)

Fiehler, Douglas; Oleson, Steven

2004-01-01

A study was conducted that shows how a single Radioisotope Electric Propulsion (REP) spacecraft design could be used for various missions throughout the solar system. This spacecraft design is based on a REP feasibility design from a study performed by NASA Glenn Research Center and the Johns Hopkins University Applied Physics Laboratory. The study also identifies technologies that need development to enable these missions. The mission baseline for the REP feasibility design study is a Trojan asteroid orbiter. This mission sends an REP spacecraft to Jupiter s leading Lagrange point where it would orbit and examine several Trojan asteroids. The spacecraft design from the REP feasibility study would also be applicable to missions to the Centaurs, and through some change of payload configuration, could accommodate a comet sample-return mission. Missions to small bodies throughout the outer solar system are also within reach of this spacecraft design. This set of missions, utilizing the common REP spacecraft design, is examined and required design modifications for specific missions are outlined.

Integration of Pneumatic Technology in Powered Mobility Devices

PubMed Central

Daveler, Brandon; Wang, Hongwu; Gebrosky, Benjamin; Grindle, Garrett G.; Schneider, Urs

2017-01-01

Advances in electric motors, electronics, and control systems have enhanced the capability and drivability of electric power mobility devices over the last 60 years. Yet, battery technologies used in powered mobility devices (PMDs) have not kept pace. Recent advances in pneumatic technology, primarily the high torque, low speed design of rotary piston air motors, directly align with the needs of PMD. Pneumatic technology has advantages over battery-powered technology, including lighter weight, lower operating costs, decreased environmental impact, better reliability, and increased safety. Two prototypes were created that incorporated rotary piston air motors, high-pressure air tanks, and air-pressure regulators. Prototype 1 was created by modifying an existing electric PMD. Range tests were performed to determine the feasibility of pneumatic technology and the optimal combination of components to allow the longest range possible at acceptable speeds over ideal conditions. Using a 1.44 L air tank for feasibility testing, prototype 1 was capable of traveling 800 m, which confirmed the feasibility of pneumatic technology usage in PMDs. Prototype 2 was designed based on the testing results from prototype 1. After further optimization of prototype 2, the average maximum range was 3,150 m. Prototype 2 is up to 28.3% lighter than an equivalent size electric PMD and can be fully recharged in approximately 2 minutes. It decreases the cost of PMDs by approximately $1,500, because batteries do not need to be replaced over the lifetime of the device. The results provide justification for the use of pneumatic technology in PMDs. PMID:29339888

Integration of Pneumatic Technology in Powered Mobility Devices.

PubMed

Daveler, Brandon; Wang, Hongwu; Gebrosky, Benjamin; Grindle, Garrett G; Schneider, Urs; Cooper, Rory A

2017-01-01

Advances in electric motors, electronics, and control systems have enhanced the capability and drivability of electric power mobility devices over the last 60 years. Yet, battery technologies used in powered mobility devices (PMDs) have not kept pace. Recent advances in pneumatic technology, primarily the high torque, low speed design of rotary piston air motors, directly align with the needs of PMD. Pneumatic technology has advantages over battery-powered technology, including lighter weight, lower operating costs, decreased environmental impact, better reliability, and increased safety. Two prototypes were created that incorporated rotary piston air motors, high-pressure air tanks, and air-pressure regulators. Prototype 1 was created by modifying an existing electric PMD. Range tests were performed to determine the feasibility of pneumatic technology and the optimal combination of components to allow the longest range possible at acceptable speeds over ideal conditions. Using a 1.44 L air tank for feasibility testing, prototype 1 was capable of traveling 800 m, which confirmed the feasibility of pneumatic technology usage in PMDs. Prototype 2 was designed based on the testing results from prototype 1. After further optimization of prototype 2, the average maximum range was 3,150 m. Prototype 2 is up to 28.3% lighter than an equivalent size electric PMD and can be fully recharged in approximately 2 minutes. It decreases the cost of PMDs by approximately $1,500, because batteries do not need to be replaced over the lifetime of the device. The results provide justification for the use of pneumatic technology in PMDs.

Wireless Instrumentation Use on Launch Vehicles

NASA Technical Reports Server (NTRS)

Sherman, Aaron

2010-01-01

This slide presentation reviews the results of a study on the use of wireless instrumentation and sensors on future launch vehicles. The use of wireless technologies would if feasible would allow for fewer wires, and allow for more flexibility. However, it was generally concluded that wireless solutions are not currently ready to replace wired technologies for launch vehicles. The recommendations of the study were to continue to use wired sensors as the primary choice for vehicle instrumentation, and to continue to assess needs and use wireless instrumentation where appropriate. The future work includes support efforts for wireless technologies, and continue to monitor the development of wireless solutions.

Geothermal space/water heating for City of Mammoth Lakes, California. Draft final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sims, A.V.; Racine, W.C.

1977-09-01

The results of a study to determine the technical, economic and environmental feasibility of geothermal district heating for Mammoth Lakes Village, California are presented. The geothermal district heating system selected is technically feasible and uses existing technology in its design and operation. During a preliminary environmental assessment, no potential adverse environmental impacts could be identified of sufficient consequence to preclude the construction and operation of the proposed district heating system. A follow-on program aimed at implementing district heating in Mammoth is outlined.

Data and image transfer using mobile phones to strengthen microscopy-based diagnostic services in low and middle income country laboratories.

PubMed

Tuijn, Coosje J; Hoefman, Bas J; van Beijma, Hajo; Oskam, Linda; Chevrollier, Nicolas

2011-01-01

The emerging market of mobile phone technology and its use in the health sector is rapidly expanding and connecting even the most remote areas of world. Distributing diagnostic images over the mobile network for knowledge sharing, feedback or quality control is a logical innovation. To determine the feasibility of using mobile phones for capturing microscopy images and transferring these to a central database for assessment, feedback and educational purposes. A feasibility study was carried out in Uganda. Images of microscopy samples were taken using a prototype connector that could fix a variety of mobile phones to a microscope. An Information Technology (IT) platform was set up for data transfer from a mobile phone to a website, including feedback by text messaging to the end user. Clear images were captured using mobile phone cameras of 2 megapixels (MP) up to 5MP. Images were sent by mobile Internet to a website where they were visualized and feedback could be provided to the sender by means of text message. The process of capturing microscopy images on mobile phones, relaying them to a central review website and feeding back to the sender is feasible and of potential benefit in resource poor settings. Even though the system needs further optimization, it became evident from discussions with stakeholders that there is a demand for this type of technology.

Maintaining Cognitive Functioning in Healthy Seniors with a Technology-Based Foreign Language Program: A Pilot Feasibility Study

PubMed Central

Ware, Caitlin; Damnee, Souad; Djabelkhir, Leila; Cristancho, Victoria; Wu, Ya-Huei; Benovici, Judith; Pino, Maribel; Rigaud, Anne-Sophie

2017-01-01

Researchers have hypothesized that learning a foreign language could be beneficial for seniors, as language learning requires the use of extensive neural networks. We developed and qualitatively evaluated an English training program for older French adults; our principal objective was to determine whether a program integrating technology is feasible for this population. We conducted a 4-month pilot study (16, 2-h sessions) with 14 French participants, (nine women, five men, average age 75). Questionnaires were administered pre- and post-intervention to measure cognitive level and subjective feelings of loneliness or social isolation; however, these scores did not improve significantly. Post-intervention, semi-directive interviews were carried out with participants, and a content/theme analysis was performed. Five main themes were identified from the interviews: Associations with school, attitudes toward English, motivation for learning English, attitudes toward the program’s organization, and social ties. The program was found to be feasible for this age group, yet perceived as quite difficult for participants who lacked experience with English. Nonetheless, most participants found the program to be stimulating and enjoyable. We discuss different suggestions for future programs and future directions for foreign-language learning as a therapeutic and cognitive intervention. PMID:28298892

Supporting nursing students' critical thinking with a mobile web learning environment.

PubMed

Lai, Chin-Yuan; Wu, Cheng-Chih

2012-01-01

The use of mobile technology has the potential of revolutionizing and transforming the way clinical practicums are conducted in nursing training. Our Web-based implementation suggested that incorporating technology, specifically with Internet and mobile devices, to promote nursing students’ critical thinking is feasible and showed dramatic results. As our environment was tailored for the psychiatric nursing practicum, future studies should delineate the context in which they are to be delivered.

New Concepts for Compact Space Reactor Power Systems for Space Based Radar Applications: A Feasibility Study

DTIC Science & Technology

1989-12-01

SPENT FUEL REPROCESSING COULD ALSO BE EMPLOYED IRRADIATION EXPERIENCE - EXTREMELY LIMITED - JOINT US/UK PROGRAM (ONGOING) - TUI/KFK PROGRAM (CANCELED...only the use of off-the-shelf technologies. For example, conventional fuel technology (uranium dioxide), conventional thermionic conversion...advanced fuel (Americium oxide, A1TI2O3) and advanced thermionic conversion. Concept C involves use of an advanced fuel (Americium oxide, Arri203

Video chat technology to remotely quantify dietary, supplement, and medication adherence in clinical trials

PubMed Central

Peterson, Courtney M.; Apolzan, John W.; Wright, Courtney; Martin, Corby K.

2017-01-01

We conducted a pair of studies to test the validity, reliability, feasibility, and acceptability of using video chat technology as a novel method to quantify dietary and pill-taking (i.e., supplement and medication) adherence. In the first study, we investigated whether video chat technology can accurately quantify adherence to dietary and pill-taking interventions. Mock study participants ate food items and swallowed pills while performing randomized scripted “cheating” behaviors design to mimic non-adherence. Monitoring was conducted in a crossover design, with two monitors watching in-person and two watching remotely by Skype on a smartphone. For the second study, a 22-question online survey was sent to an email listserv with more than 20,000 unique email addresses of past and present study participants to assess the feasibility and acceptability of the technology. For the dietary adherence tests, monitors detected 86% of non-adherent events (sensitivity) in-person versus 78% of events via video chat monitoring (p=0.12), with comparable inter-rater agreement (0.88 vs. 0.85; p=0.62). However, for pill-taking, non-adherence trended towards being more easily detected in-person than by video chat (77% vs. 60%; p=0.08), with non-significantly higher inter-rater agreement (0.85 vs. 0.69; p=0.21). Survey results from the second study (N=1,076 respondents; at least a 5% response rate) indicated that 86.4% of study participants had video chatting hardware, 73.3% were comfortable using the technology; and 79.8% were willing to use it for clinical research. Given the capability of video chat technology to reduce participant burden and to outperform other adherence monitoring methods such as dietary self-report and pill counts, video chatting is a novel and highly promising platform to quantify dietary and pill-taking adherence. PMID:27753427

Prevention and treatment of pediatric obesity using mobile and wireless technologies: a systematic review

PubMed Central

Turner, Tami; Spruijt-Metz, Donna; Wen, C. K. Fred; Hingle, Melanie D.

2014-01-01

Mobile health (mHealth) is a relatively nascent field, with a variety of technologies being explored and developed. Because of the explosive growth in this field, it is of interest to examine the design, development, and efficacy of various interventions as research becomes available. This systematic review examines current use of mobile health technologies in the prevention or treatment of pediatric obesity to catalogue the types of technologies utilized and the impact of mHealth to improve obesity-related outcomes in youth. Of the 4021 articles that were identified, 41 articles met inclusion criteria. Seventeen intervention studies incorporated mHealth as the primary or supplementary treatment. The remaining articles were in the beginning stages of research development and most often described moderate to high usability, feasibility, and acceptability. Although few effects were observed on outcomes such as body mass index, increases in physical activity, self-reported breakfast and fruit and vegetable consumption, adherence to treatment, and self-monitoring were observed. Findings from this review suggest that mHealth approaches are feasible and acceptable tools in the prevention and treatment of pediatric obesity. The large heterogeneity in research designs highlights the need for more agile scientific processes that can keep up with the speed of technology development. PMID:25641770

Prevention and treatment of pediatric obesity using mobile and wireless technologies: a systematic review.

PubMed

Turner, T; Spruijt-Metz, D; Wen, C K F; Hingle, M D

2015-12-01

Mobile health (mHealth) is a relatively nascent field, with a variety of technologies being explored and developed. Because of the explosive growth in this field, it is of interest to examine the design, development and efficacy of various interventions as research becomes available. This systematic review examines current use of mHealth technologies in the prevention or treatment of pediatric obesity to catalogue the types of technologies utilized and the impact of mHealth to improve obesity-related outcomes in youth. Of the 4021 articles that were identified, 41 articles met inclusion criteria. Seventeen intervention studies incorporated mHealth as the primary or supplementary treatment. The remaining articles were in the beginning stages of research development and most often described moderate-to-high usability, feasibility and acceptability. Although few effects were observed on outcomes such as body mass index, increases in physical activity, self-reported breakfast and fruit and vegetable consumption, adherence to treatment, and self-monitoring were observed. Findings from this review suggest that mHealth approaches are feasible and acceptable tools in the prevention and treatment of pediatric obesity. The large heterogeneity in research designs highlights the need for more agile scientific processes that can keep up with the speed of technology development. © 2015 World Obesity.

A novel research design can aid disinvestment from existing health technologies with uncertain effectiveness, cost-effectiveness, and/or safety.

PubMed

Haines, Terry; O'Brien, Lisa; McDermott, Fiona; Markham, Donna; Mitchell, Deb; Watterson, Dina; Skinner, Elizabeth

2014-02-01

Disinvestment is critical for ensuring the long-term sustainability of health-care services. Key barriers to disinvestment are heterogeneity between research and clinical settings, absence of evidence of effectiveness of some health technologies, and exposure of patients and organizations to risks and poor outcomes. We aimed to develop a feasible research design that can evaluate disinvestment in health technologies of uncertain effectiveness or cost-effectiveness. This article (1) establishes the need for disinvestment methodologies, (2) identifies the ethical concerns and feasibility constraints of conventional research designs for this issue, (3) describes the planning, implementation, and analytical framework for a novel disinvestment-specific study design, and (4) describes potential limitations in application of this design. The stepped-wedge, roll-in cluster randomized controlled trial can facilitate the disinvestment process, whereas generating evidence to determine whether the decision to disinvest was sound in the clinical environment. A noninferiority research paradigm may be applied to this methodology to demonstrate that the removal of a health technology does not adversely affect outcomes. This research design can be applied across multiple fields and will assist determination of whether specific health technologies are clinically effective, cost-effective, and safe. Copyright © 2014 Elsevier Inc. All rights reserved.

Earth to Orbit Beamed Energy Experiment

NASA Technical Reports Server (NTRS)

Johnson, Les; Montgomery, Edward E.

2017-01-01

As a means of primary propulsion, beamed energy propulsion offers the benefit of offloading much of the propulsion system mass from the vehicle, increasing its potential performance and freeing it from the constraints of the rocket equation. For interstellar missions, beamed energy propulsion is arguably the most viable in the near- to mid-term. A near-term demonstration showing the feasibility of beamed energy propulsion is necessary and, fortunately, feasible using existing technologies. Key enabling technologies are large area, low mass spacecraft and efficient and safe high power laser systems capable of long distance propagation. NASA is currently developing the spacecraft technology through the Near Earth Asteroid Scout solar sail mission and has signed agreements with the Planetary Society to study the feasibility of precursor laser propulsion experiments using their LightSail-2 solar sail spacecraft. The capabilities of Space Situational Awareness assets and the advanced analytical tools available for fine resolution orbit determination now make it possible to investigate the practicalities of an Earth-to-orbit Beamed Energy eXperiment (EBEX) - a demonstration at delivered power levels that only illuminate a spacecraft without causing damage to it. The degree to which this can be expected to produce a measurable change in the orbit of a low ballistic coefficient spacecraft is investigated. Key system characteristics and estimated performance are derived for a near term mission opportunity involving the LightSail-2 spacecraft and laser power levels modest in comparison to those proposed previously. While the technology demonstrated by such an experiment is not sufficient to enable an interstellar precursor mission, if approved, then it would be the next step toward that goal.

Clinical feasibility and efficacy of using virtual surgical planning in bimaxillary orthognathic surgery without intermediate splint.

PubMed

Li, Yunfeng; Jiang, Yangmei; Zhang, Nan; Xu, Rui; Hu, Jing; Zhu, Songsong

2015-03-01

Computer-aided jaw surgery has been extensively studied recently. The purpose of this study was to determine the clinical feasibility of performing bimaxillary orthognathic surgery without intermediate splint using virtual surgical planning and rapid prototyping technology. Twelve consecutive patients who underwent bimaxillary orthognathic surgery were included. The presented treatment plan here mainly consists of 6 procedures: (1) data acquisition from computed tomography (CT) of the skull and laser scanning of the dentition; (2) reconstruction and fusion of a virtual skull model with accurate dentition; (3) virtual surgery simulation including osteotomy and movement and repositioning of bony segments; (4) final surgical splint fabrication (no intermediate splint) using computer-aided design and rapid prototyping technology; (5) transfer of the virtual surgical plan to the operating room; and (6) comparison of the actual surgical outcome to the virtual surgical plan. All procedures of the treatment were successfully performed on all 12 patients. In quantification of differences between simulated and actual postoperative outcome, we found that the mean linear difference was less than 1.8 mm, and the mean angular difference was less than 2.5 degrees in all evaluated patients. Results from this study suggested that it was feasible to perform bimaxillary orthognathic surgery without intermediate splint. Virtual surgical planning and the guiding splints facilitated the diagnosis, treatment planning, accurate osteotomy, and bony segments repositioning in orthognathic surgery.

Feasibility Study of Anaerobic Digestion of Food Waste in St. Bernard, Louisiana. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moriarty, K.

The U.S. Environmental Protection Agency (EPA) developed the RE-Powering America's Land initiative to re-use contaminated sites for renewable energy generation when aligned with the community's vision for the site. The former Kaiser Aluminum Landfill in St. Bernard Parish, Louisiana, was selected for a feasibility study under the program. Preliminary work focused on selecting a biomass feedstock. Discussions with area experts, universities, and the project team identified food wastes as the feedstock and anaerobic digestion (AD) as the technology.

Feasibility Study of Biopower in East Helena, Montana. A Study Prepared in Partnership with the Environmental Protection Agency for the RE-Powering America's Land Initiative: Siting Renewable Energy on Potentially Contaminated Land and Mine Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moriarty, K.

2013-02-01

The U.S. Environmental Protection Agency (EPA) developed the RE-Powering America's Land initiative to reuse contaminated sites for renewable energy generation when aligned with the community's vision for the site. The former American Smelting and Refining Company (Asarco) smelter in East Helena, Montana, was selected for a feasibility study under the initiative. Biomass was chosen as the renewable energy resource based on the wood products industry in the area. Biopower was selected as the technology based on Montana's renewable portfolio standard (RPS) requiring utilities to purchase renewable power.

Feasibility Study for an Asymmetric B Factory Based on PEP

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chattapadhyay, A.; Hitlin, D.; Porter, F.

This report addresses the feasibility of designing and constructing an asymmetric B-factory based on the PEP storage ring at SLAC that can ultimately reach a luminosity of 1 X 10{sup 34} cm{sup -2}s{sup -1}. Such a facility, operating at the {gamma}(4S) resonance, could be used to study mixing, rate decays, and CP violation in the B{bar B} system, and could also study tau and charm physics. The essential accelerator physics, engineering, and technology issues that must be addressed to successfully build this exciting and challenging facility are identified, and possible solutions, or R and D that will reasonable lead tomore » such solutions, are described.« less

An economic study of an advanced technology supersonic cruise vehicle

NASA Technical Reports Server (NTRS)

Smith, C. L.; Williams, L. J.

1975-01-01

A description is given of the methods used and the results of an economic study of an advanced technology supersonic cruise vehicle. This vehicle was designed for a maximum range of 4000 n.mi. at a cruise speed of Mach 2.7 and carrying 292 passengers. The economic study includes the estimation of aircraft unit cost, operating cost, and idealized cash flow and discounted cash flow return on investment. In addition, it includes a sensitivity study on the effects of unit cost, manufacturing cost, production quantity, average trip length, fuel cost, load factor, and fare on the aircraft's economic feasibility.

IMPACTS OF TECHNOLOGICAL CHANGES IN WAREHOUSING, PHASE I.

ERIC Educational Resources Information Center

HAMILTON, PHYLLIS D.; KINCAID, HARRY V.

THE OBJECTIVES OF THIS STUDY WERE (1) TO DETERMINE THE AVAILABILITY, NATURE, AND RELIABILITY OF DATA ON THE RAPID CHANGE IN THE WAREHOUSING FUNCTION IN INDUSTRY AND (2) TO PROVIDE A BASIS FOR DECISIONS CONCERNING THE DESIRABILITY AND FEASIBILITY OF CONDUCTING SUBSEQUENT STUDIES. THREE MAJOR SOURCES OF INFORMATION ON CALIFORNIA, OREGON, WASHINGTON,…

Transforming Classrooms through Game-Based Learning: A Feasibility Study in a Developing Country

ERIC Educational Resources Information Center

Vate-U-Lan, Poonsri

2015-01-01

This article reports an exploratory study which investigated attitudes towards the practice of game-based learning in teaching STEM (science, technology, engineering and mathematics) within a Thai educational context. This self-administered Internet-based survey yielded 169 responses from a snowball sampling technique. Three fifths of respondents…

Reactor technology assessment and selection utilizing systems engineering approach

NASA Astrophysics Data System (ADS)

Zolkaffly, Muhammed Zulfakar; Han, Ki-In

2014-02-01

The first Nuclear power plant (NPP) deployment in a country is a complex process that needs to consider technical, economic and financial aspects along with other aspects like public acceptance. Increased interest in the deployment of new NPPs, both among newcomer countries and those with expanding programs, necessitates the selection of reactor technology among commercially available technologies. This paper reviews the Systems Decision Process (SDP) of Systems Engineering and applies it in selecting the most appropriate reactor technology for the deployment in Malaysia. The integrated qualitative and quantitative analyses employed in the SDP are explored to perform reactor technology assessment and to select the most feasible technology whose design has also to comply with the IAEA standard requirements and other relevant requirements that have been established in this study. A quick Malaysian case study result suggests that the country reside with PWR (pressurized water reactor) technologies with more detailed study to be performed in the future for the selection of the most appropriate reactor technology for Malaysia. The demonstrated technology assessment also proposes an alternative method to systematically and quantitatively select the most appropriate reactor technology.

Assessing the feasibility of using TRANSIMS in North Carolina : The Fayetteville - Fort Bragg case.

DOT National Transportation Integrated Search

2000-08-01

This project assesses the feasibility implementing TRANSIMS to accomplish regional transportation modeling in North Carolina. The report summarizes TRANSIMS technology, its data and resource requirements, and typical output results. To gauge TRANSIMS...

Facebook Ads Recruit Parents of Children with Cancer for an Online Survey of Web-Based Research Preferences

PubMed Central

Akard, Terrah Foster; Wray, Sarah; Gilmer, Mary

2014-01-01

Background Studies involving samples of children with life-threatening illnesses and their families face significant challenges, including inadequate sample sizes and limited diversity. Social media recruitment and web-based research methods may help address such challenges yet have not been explored in pediatric cancer populations. Objective This study examined the feasibility of using Facebook ads to recruit parent caregivers of children and teens with cancer. We also explored the feasibility of web-based video recording in pediatric palliative care populations by surveying parents of children with cancer regarding (a) their preferences for research methods and (b) technological capabilities of their computers and phones. Methods Facebook's paid advertising program was used to recruit parent caregivers of children currently living with cancer to complete an electronic survey about research preferences and technological capabilities. Results The advertising campaign generated 3,897,981 impressions which resulted in 1050 clicks at a total cost of $1129.88. Of 284 screened individuals, 106 were eligible. Forty-five caregivers of children with cancer completed the entire electronic survey. Parents preferred and had technological capabilities for web-based and electronic research methods. Participant survey responses are reported. Conclusion Facebook was a useful, cost-effective method to recruit a diverse sample of parent caregivers of children with cancer. Web-based video recording and data collection may be feasible and desirable in samples of children with cancer and their families. Implications for Practice Web-based methods (e.g., Facebook, Skype) may enhance communication and access between nurses and pediatric oncology patients and their families. PMID:24945264

The combination design for open and endoscopic surgery using fluorescence molecular imaging technology

NASA Astrophysics Data System (ADS)

Mao, Yamin; Jiang, Shixin; Ye, Jinzuo; An, Yu; Yang, Xin; Chi, Chongwei; Tian, Jie

2015-03-01

For clinical surgery, it is still a challenge to objectively determine tumor margins during surgery. With the development of medical imaging technology, fluorescence molecular imaging (FMI) method can provide real-time intraoperative tumor margin information. Furthermore, surgical navigation system based on FMI technology plays an important role for the aid of surgeons' precise tumor margin decision. However, detection depth is the most limitation exists in the FMI technique and the method convenient for either macro superficial detection or micro deep tissue detection is needed. In this study, we combined advantages of both open surgery and endoscopic imaging systems with FMI technology. Indocyanine green (ICG) experiments were performed to confirm the feasibility of fluorescence detection in our system. Then, the ICG signal was photographed in the detection area with our system. When the system connected with endoscope lens, the minimum quantity of ICG detected by our system was 0.195 ug. For aspect of C mount lens, the sensitivity of ICG detection with our system was 0.195ug. Our experiments results proved that it was feasible to detect fluorescence images with this combination method. Our system shows great potential in the clinical applications of precise dissection of various tumors

Magnetic levitation assisted aircraft take-off and landing (feasibility study - GABRIEL concept)

NASA Astrophysics Data System (ADS)

Rohacs, Daniel; Rohacs, Jozsef

2016-08-01

The Technology Roadmap 2013 developed by the International Air Transport Association envisions the option of flying without an undercarriage to be in operation by 2032. Preliminary investigations clearly indicate that magnetic levitation technology (MagLev) might be an appealing solution to assist the aircraft take-off and landing. The EU supported research project, abbreviated as GABRIEL, was dealing with (i) the concept development, (ii) the identification, evaluation and selection of the deployable magnetic levitation technology, (iii) the definition of the core system elements (including the required aircraft modifications, the ground-based system and airport elements, and the rendezvous control system), (iv) the analysis of the safety and security aspects, (v) the concept validation and (vi) the estimation of the proposed concept impact in terms of aircraft weight, noise, emission, cost-benefit). All results introduced here are compared to a medium size hypothetic passenger aircraft (identical with an Airbus A320). This paper gives a systematic overview of (i) the applied methods, (ii) the investigation of the possible use of magnetic levitation technology to assist the commercial aircraft take-off and landing processes and (iii) the demonstrations, validations showing the feasibility of the radically new concept. All major results are outlined.

Systems level feasibility study for the detection of extra-solar planets. Volume 1: Infrared interferometer (IRIS) known as the Stanford Concept

NASA Technical Reports Server (NTRS)

1979-01-01

A sensor system for the direct detection of extrasolar planets from an Earth orbit is evaluated: a spinning, infrared interferometer (IRIS). It is shuttle deployed, free flying, requires no on-orbit assembly and no reservicing over a design life of five years. The sensor concept and the mission objectives are reviewed, and the performance characteristics of a baseline sensor for standard observation conditions are derived. A baseline sensor design is given and the enabling technology discussed. Cost and weight estimates are performed; and a schedule for an IRIS program including technology development and assessment of risk are given. Finally, the sensor is compared with the apodized visual telescope sensor (APOTS) proposed for the same mission. The major conclusions are: that with moderate to strong technology advances, particularly in the fields of long life cryogenics, dynamical control, mirror manufacturing, and optical alignment, the detection of a Jupiter like planet around a Sunlike star at a distance of 30 light years is feasible, with a 3 meter aperture and an observation time of 1 hour. By contrast, major and possibly unlikely breakthroughs in mirror technology are required for APOTS to match this performance.

SSME leak detection feasibility investigation by utilization of infrared sensor technology

NASA Technical Reports Server (NTRS)

Shohadaee, Ahmad A.; Crawford, Roger A.

1990-01-01

This investigation examined the potential of using state-of-the-art technology of infrared (IR) thermal imaging systems combined with computer, digital image processing and expert systems for Space Shuttle Main Engines (SSME) propellant path peak detection as an early warning system of imminent engine failure. A low-cost, laboratory experiment was devised and an experimental approach was established. The system was installed, checked out, and data were successfully acquired demonstrating the proof-of-concept. The conclusion from this investigation is that both numerical and experimental results indicate that the leak detection by using infrared sensor technology proved to be feasible for a rocket engine health monitoring system.

Method for Stereo Mapping Based on Objectarx and Pipeline Technology

NASA Astrophysics Data System (ADS)

Liu, F.; Chen, T.; Lin, Z.; Yang, Y.

2012-07-01

Stereo mapping is an important way to acquire 4D production. Based on the development of the stereo mapping and the characteristics of ObjectARX and pipeline technology, a new stereo mapping scheme which can realize the interaction between the AutoCAD and digital photogrammetry system is offered by ObjectARX and pipeline technology. An experiment is made in order to make sure the feasibility with the example of the software MAP-AT (Modern Aerial Photogrammetry Automatic Triangulation), the experimental results show that this scheme is feasible and it has very important meaning for the realization of the acquisition and edit integration.

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

Are Virtual Rehabilitation Technologies Feasible Models to Scale an Evidence-Based Fall Prevention Program? A Pilot Study Using the Kinect Camera.

PubMed

Shubert, Tiffany E; Basnett, Jeanna; Chokshi, Anang; Barrett, Mark; Komatireddy, Ravi

2015-11-05

Falls in older adults are a significant public health issue. Interventions have been developed and proven effective to reduce falls in older adults, but these programs typically last several months and can be resource intensive. Virtual rehabilitation technologies may offer a solution to bring these programs to scale. Off-the-shelf and custom exergames have demonstrated to be a feasible adjunct to rehabilitation with older adults. However, it is not known if older adults will be able or willing to use a virtual rehabilitation technology to participate in an evidence-based fall prevention program. To have the greatest impact, virtual rehabilitation technologies need to be acceptable to older adults from different backgrounds and level of fall risk. If these technologies prove to be a feasible option, they offer a new distribution channel to disseminate fall prevention programs. Stand Tall (ST) is a virtual translation of the Otago Exercise Program (OEP), an evidence-based fall prevention program. Stand Tall was developed using the Virtual Exercise Rehabilitation Assistant (VERA) software, which uses a Kinect camera and a laptop to deliver physical therapy exercise programs. Our purpose in this pilot study was to explore if ST could be a feasible platform to deliver the OEP to older adults from a variety of fall risk levels, education backgrounds, and self-described level of computer expertise. Adults age 60 and over were recruited to participate in a one-time usability study. The study included orientation to the program, navigation to exercises, and completion of a series of strength and balance exercises. Quantitative analysis described participants and the user experience. A diverse group of individuals participated in the study. Twenty-one potential participants (14 women, 7 men) met the inclusion criteria. The mean age was 69.2 (± 5.8) years, 38% had a high school education, 24% had a graduate degree, and 66% classified as "at risk for falls". Eighteen participants agreed they would like to use ST to help improve their balance, and 17 agreed or strongly agreed they would feel confident using the system in either the senior center or the home. Thirteen participants felt confident they could actually set up the system in their home. The mean System Usability Scale (SUS) score was 65.5 ± 21.2 with a range of 32.5 to 97.5. Ten participants scored ST as an above average usability experience compared to other technologies and 5 participants scored a less than optimal experience. Exploratory analysis revealed no significant relationships between user experience, education background, self-described computer experience, and fall risk. Results support the virtual delivery of the OEP by a Kinect camera and an avatar may be acceptable to older adults from a variety of backgrounds. Virtual technologies, like Stand Tall, could offer an efficient and effective approach to bring evidence-based fall prevention programs to scale to address the problem of falls and fall-related injuries. Next steps include determining if similar or better outcomes are achieved by older adults using the virtual OEP, Stand Tall, compared to the standard of care. ©Tiffany E Shubert, Jeanna Basnett, Anang Chokshi, Mark Barrett, Ravi Komatireddy. Originally published in JMIR Rehabilitation and Assistive Technology (http://rehab.jmir.org), 05.11.2015.

Feasibility and Acceptability of Smartphone Assessment in Older Adults with Cognitive and Emotional Difficulties

PubMed Central

Ramsey, Alex T.; Wetherell, Julie Loebach; Depp, Colin; Dixon, David; Lenze, Eric

2016-01-01

Objectives Ecological momentary assessment (EMA) has several advantages in clinical research yet little is known about the feasibility of collecting EMA data with mobile technologies in older adults, particularly those with emotional or cognitive difficulties. The aim of this feasibility study was to assess perceived acceptability, adherence rates, and reasons for non-adherence to smartphone-based EMA. Method At two sites, participants (n=103) aged 65 years or older with a DSM-IV-defined anxiety or depressive disorder and cognitive concerns responded three times daily to smartphone-based EMA questions assessing clinical outcomes for two 10-day periods. Quantitative and qualitative measures assessed acceptability, adherence, and reasons for non-adherence following both 10-day EMA periods. Results Participants were moderately satisfied with and comfortable using smartphone-based EMA. Overall, 76% of participants completed surveys on ≥10 of the 20 assessment days, and 70% of participants completed at least 30% of the total surveys. Reasons for non-adherence included technical (malfunction), logistical (competing demands), physiological (hearing difficulties), and cognitive (forgetting) issues. Discussion Smartphone-based EMA is feasible in older adults with cognitive and emotional difficulties. EMA tools should be responsive to the needs and preferences of participants to ensure adequate acceptability and adherence in this population. Our findings can inform the design, development, and implementation of mobile technologies in older adults in research and clinical contexts. PMID:27683018

High-Affinity Recombinant Antibody Fragments (Fabs) Can Be Applied in Peptide Enrichment Immuno-MRM Assays

PubMed Central

2015-01-01

High-affinity antibodies binding to linear peptides in solution are a prerequisite for performing immuno-MRM, an emerging technology for protein quantitation with high precision and specificity using peptide immunoaffinity enrichment coupled to stable isotope dilution and targeted mass spectrometry. Recombinant antibodies can be generated from appropriate libraries in high-throughput in an automated laboratory and thus may offer advantages over conventional monoclonal antibodies. However, recombinant antibodies are typically obtained as fragments (Fab or scFv) expressed from E. coli, and it is not known whether these antibody formats are compatible with the established protocols and whether the affinities necessary for immunocapture of small linear peptides can be achieved with this technology. Hence, we performed a feasibility study to ask: (a) whether it is feasible to isolate high-affinity Fabs to small linear antigens and (b) whether it is feasible to incorporate antibody fragments into robust, quantitative immuno-MRM assays. We describe successful isolation of high-affinity Fab fragments against short (tryptic) peptides from a human combinatorial Fab library. We analytically characterize three immuno-MRM assays using recombinant Fabs, full-length IgGs constructed from these Fabs, or traditional monoclonals. We show that the antibody fragments show similar performance compared with traditional mouse- or rabbit-derived monoclonal antibodies. The data establish feasibility of isolating and incorporating high-affinity Fabs into peptide immuno-MRM assays. PMID:24568200

High-affinity recombinant antibody fragments (Fabs) can be applied in peptide enrichment immuno-MRM assays.

PubMed

Whiteaker, Jeffrey R; Zhao, Lei; Frisch, Christian; Ylera, Francisco; Harth, Stefan; Knappik, Achim; Paulovich, Amanda G

2014-04-04

High-affinity antibodies binding to linear peptides in solution are a prerequisite for performing immuno-MRM, an emerging technology for protein quantitation with high precision and specificity using peptide immunoaffinity enrichment coupled to stable isotope dilution and targeted mass spectrometry. Recombinant antibodies can be generated from appropriate libraries in high-throughput in an automated laboratory and thus may offer advantages over conventional monoclonal antibodies. However, recombinant antibodies are typically obtained as fragments (Fab or scFv) expressed from E. coli, and it is not known whether these antibody formats are compatible with the established protocols and whether the affinities necessary for immunocapture of small linear peptides can be achieved with this technology. Hence, we performed a feasibility study to ask: (a) whether it is feasible to isolate high-affinity Fabs to small linear antigens and (b) whether it is feasible to incorporate antibody fragments into robust, quantitative immuno-MRM assays. We describe successful isolation of high-affinity Fab fragments against short (tryptic) peptides from a human combinatorial Fab library. We analytically characterize three immuno-MRM assays using recombinant Fabs, full-length IgGs constructed from these Fabs, or traditional monoclonals. We show that the antibody fragments show similar performance compared with traditional mouse- or rabbit-derived monoclonal antibodies. The data establish feasibility of isolating and incorporating high-affinity Fabs into peptide immuno-MRM assays.

Feasibility and Acceptability of Smartphone Assessment in Older Adults with Cognitive and Emotional Difficulties.

PubMed

Ramsey, Alex T; Wetherell, Julie Loebach; Depp, Colin; Dixon, David; Lenze, Eric

Ecological momentary assessment (EMA) has several advantages in clinical research yet little is known about the feasibility of collecting EMA data with mobile technologies in older adults, particularly those with emotional or cognitive difficulties. The aim of this feasibility study was to assess perceived acceptability, adherence rates, and reasons for non-adherence to smartphone-based EMA. At two sites, participants ( n =103) aged 65 years or older with a DSM-IV-defined anxiety or depressive disorder and cognitive concerns responded three times daily to smartphone-based EMA questions assessing clinical outcomes for two 10-day periods. Quantitative and qualitative measures assessed acceptability, adherence, and reasons for non-adherence following both 10-day EMA periods. Participants were moderately satisfied with and comfortable using smartphone-based EMA. Overall, 76% of participants completed surveys on ≥10 of the 20 assessment days, and 70% of participants completed at least 30% of the total surveys. Reasons for non-adherence included technical (malfunction), logistical (competing demands), physiological (hearing difficulties), and cognitive (forgetting) issues. Smartphone-based EMA is feasible in older adults with cognitive and emotional difficulties. EMA tools should be responsive to the needs and preferences of participants to ensure adequate acceptability and adherence in this population. Our findings can inform the design, development, and implementation of mobile technologies in older adults in research and clinical contexts.

Implementing a routine outcome assessment procedure to evaluate the quality of assistive technology service delivery for children with physical or multiple disabilities: Perceived effectiveness, social cost, and user satisfaction.

PubMed

Desideri, Lorenzo; Bizzarri, Martina; Bitelli, Claudio; Roentgen, Uta; Gelderblom, Gert-Jan; de Witte, Luc

2016-01-01

There is a lack of evidence on the effects and quality of assistive technology service delivery (ATSD). This study presents a quasi-experimental 3-months follow-up using a pre-test/post-test design aimed at evaluating outcomes of assistive technology (AT) interventions targeting children with physical and multiple disabilities. A secondary aim was to evaluate the feasibility of the follow-up assessment adopted in this study with a view to implement the procedure in routine clinical practice. Forty-five children aged 3-17 years were included. Parents were asked to complete the Individual Prioritised Problem Assessment (IPPA) for AT effectiveness; KWAZO (Kwaliteit van Zorg [Quality of Care]) and Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST) 2.0 for satisfaction with ATSD; Siva Cost Analysis Instrument (SCAI) for estimating the social cost of AT interventions. At follow-up, 25 children used the AT recommended. IPPA effect sizes ranged from 1.4 to 0.7, showing a large effect of AT interventions. Overall, parents were satisfied with ATSD, but Maintenance, Professional Services, and AT Delivery were rated not satisfactory. SCAI showed more resources spent for AT intervention compared to human assistance without technological supports. AT may be an effective intervention for children with disabilities. Issues concerning responsiveness and feasibility of the IPPA and the SCAI instruments are discussed with a view to inform routine clinical practice.

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

30 CFR 582.23 - Testing Plan.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Resources BUREAU OF OCEAN ENERGY MANAGEMENT, DEPARTMENT OF THE INTERIOR OFFSHORE OPERATIONS IN THE OUTER... detailed Mining Plan than is obtainable under an approved Delineation Plan, to prepare feasibility studies, to carry out a pilot program to evaluate processing techniques or technology or mining equipment, or...

THE FEASIBILITY OF UTILIZING SOLID WASTES FOR BUILDING MATERIALS. EXECUTIVE SUMMARY

EPA Science Inventory

This report focuses on two phases of a suggested four phase study to evaluate the technological and commercial possibilities of waste - derived composites. The first phase involved a joint and comprehensive literature search to identify wastes with potential as building materials...

Feasibility of personal rapid transit in Ithaca, New York : final report, September 2010.

DOT National Transportation Integrated Search

2010-09-01

Personal Rapid Transit (PRT) is an emerging technology that has the potential to reduce the emission of greenhouse : gases and the consumption of petroleum products by reducing vehicle miles traveled (VMT). This research study : funded by the New Yor...

A feasibility study for an emergency medical services system to serve the Permian basin in the state of Texas

NASA Technical Reports Server (NTRS)

1975-01-01

The development of an Emergency Medical Services System grant application for the Permian Basin Region of West Texas is described along with the application of NASA-developed technology. Conclusions and recommendations are included.

The Feasibility Study of Persulfate Oxidation to Regenerating of Spent Granular Activated Carbon

EPA Science Inventory

Chemical oxidation is a developing technology used to regenerate contaminant-spent GAC. Chemical regeneration of GAC represents a viable option to thermal regeneration methods that are energy intensive resulting in significant consumption of fossil fuels and production of greenho...

Economic Feasibility Analysis Report. Strategic Mobility 21

DTIC Science & Technology

2007-08-31

dedicated arc (truck lane, main rail line, MAGLEV , etc.) and an inland facility capable of serving as a logistics buffer for the marine terminal to...for the Commercial Deployment of Transportation Technologies, “Marketing Study Phase I: MAGLEV Market Sizing and Operational Model.” May, 2006

Feasibility study for liquefied natural gas utilization for commercial vehicles on the Pennsylvania Turnpike.

DOT National Transportation Integrated Search

2012-10-01

Recent advances in horizontal drilling and fracturing technology in gas shale formations have increased natural gas supply : such that its price has decoupled from petroleum and is likely to remain significantly lower for the foreseeable future. In t...

Producing ammonium sulfate from flue gas desulfurization by-products

USGS Publications Warehouse

Chou, I.-Ming; Bruinius, J.A.; Benig, V.; Chou, S.-F.J.; Carty, R.H.

2005-01-01

Emission control technologies using flue gas desulfurization (FGD) have been widely adopted by utilities burning high-sulfur fuels. However, these technologies require additional equipment, greater operating expenses, and increased costs for landfill disposal of the solid by-products produced. The financial burdens would be reduced if successful high-volume commercial applications of the FGD solid by-products were developed. In this study, the technical feasibility of producing ammonium sulfate from FGD residues by allowing it to react with ammonium carbonate in an aqueous solution was preliminarily assessed. Reaction temperatures of 60, 70, and 80??C and residence times of 4 and 6 hours were tested to determine the optimal conversion condition and final product evaluations. High yields (up to 83%) of ammonium sulfate with up to 99% purity were achieved under relatively mild conditions. The optimal conversion condition was observed at 60??C and a 4-hour residence time. The results of this study indicate the technical feasibility of producing ammonium sulfate fertilizer from an FGD by-product. Copyright ?? Taylor & Francis Inc.

Structural Feasibility Analysis of a Robotically Assembled Very Large Aperture Optical Space Telescope

NASA Technical Reports Server (NTRS)

Wilkie, William Keats; Williams, R. Brett; Agnes, Gregory S.; Wilcox, Brian H.

2007-01-01

This paper presents a feasibility study of robotically constructing a very large aperture optical space telescope on-orbit. Since the largest engineering challenges are likely to reside in the design and assembly of the 150-m diameter primary reflector, this preliminary study focuses on this component. The same technology developed for construction of the primary would then be readily used for the smaller optical structures (secondary, tertiary, etc.). A reasonable set of ground and on-orbit loading scenarios are compiled from the literature and used to define the structural performance requirements and size the primary reflector. A surface precision analysis shows that active adjustment of the primary structure is required in order to meet stringent optical surface requirements. Two potential actuation strategies are discussed along with potential actuation devices at the current state of the art. The finding of this research effort indicate that successful technology development combined with further analysis will likely enable such a telescope to be built in the future.

AMTD - Advanced Mirror Technology Development in Mechanical Stability

NASA Technical Reports Server (NTRS)

Knight, J. Brent

2015-01-01

Analytical tools and processes are being developed at NASA Marshal Space Flight Center in support of the Advanced Mirror Technology Development (AMTD) project. One facet of optical performance is mechanical stability with respect to structural dynamics. Pertinent parameters are: (1) the spacecraft structural design, (2) the mechanical disturbances on-board the spacecraft (sources of vibratory/transient motion such as reaction wheels), (3) the vibration isolation systems (invariably required to meet future science needs), and (4) the dynamic characteristics of the optical system itself. With stability requirements of future large aperture space telescopes being in the lower Pico meter regime, it is paramount that all sources of mechanical excitation be considered in both feasibility studies and detailed analyses. The primary objective of this paper is to lay out a path to perform feasibility studies of future large aperture space telescope projects which require extreme stability. To get to that end, a high level overview of a structural dynamic analysis process to assess an integrated spacecraft and optical system is included.

Feasibility study of scanning celestial Attitude System (SCADS) for Earth Resources Technology Satellite (ERTS)

NASA Technical Reports Server (NTRS)

1971-01-01

The feasibility of using the Scanning Celestial Attitude Determination System (SCADS) during Earth Resources Technology Satellite (ERTS) missions to compute an accurate spacecraft attitude by use of stellar measurements is considered. The spacecraft is local-vertical-stabilized. A heuristic discussion of the SCADS concept is first given. Two concepts are introduced: a passive system which contains no moving parts, and an active system in which the reticle is caused to rotate about the sensor's axis. A quite complete development of the equations of attitude motions is then given. These equations are used to generate the true attitude which in turn is used to compute the transit times of detectable stars and to determine the errors associated with the SCADS attitude. A more complete discussion of the analytical foundation of SCADS concept and its use for the geometries particular to this study, as well as salient design parameters for the passive and active systems are included.

Solar-assisted gas-energy water-heating feasibility for apartments

NASA Technical Reports Server (NTRS)

Davis, E. S.

1975-01-01

Studies of residential energy use, solar-energy technology for buildings, and the requirements for implementing technology in the housing industry led to a project to develop a solar water heater for apartments. A design study for a specific apartment was used to establish a solar water-heater cost model which is based on plumbing contractor bids and manufacturer estimates. The cost model was used to size the system to minimize the annualized cost of hot water. The annualized cost of solar-assisted gas-energy water heating is found to be less expensive than electric water heating but more expensive than gas water heating. The feasibility of a natural gas utility supplying the auxiliary fuel is evaluated. It is estimated that gas-utilizing companies will find it profitable to offer solar water heating as part of a total energy service option or on a lease basis when the price of new base-load supplies of natural gas reaches $2.50-$3.00 per million Btu.

Lasers revisited - Their superior utility for interstellar beacons, communications, and travel

NASA Technical Reports Server (NTRS)

Rather, John D. G.

1991-01-01

This paper demonstrates reasons why research supporting SETI and Communication with Extraterrestrial Intelligence should be broadened to optical wavelengths rather than focusing almost entirely upon microwave wavelengths and technologies. New perceptions regarding the feasibility of laser technologies, along with reassessments of signal-to-noise considerations, show both the desirability and feasibility of optical interstellar transmissions, especially at IR and visible wavelengths. It is shown that utilization of the large bandwidths available at optical wavelengths greatly improves the possible use of such endeavors.

Heuristics Applied in the Development of Advanced Space Mission Concepts

NASA Technical Reports Server (NTRS)

Nilsen, Erik N.

1998-01-01

Advanced mission studies are the first step in determining the feasibility of a given space exploration concept. A space scientist develops a science goal in the exploration of space. This may be a new observation method, a new instrument or a mission concept to explore a solar system body. In order to determine the feasibility of a deep space mission, a concept study is convened to determine the technology needs and estimated cost of performing that mission. Heuristics are one method of defining viable mission and systems architectures that can be assessed for technology readiness and cost. Developing a viable architecture depends to a large extent upon extending the existing body of knowledge, and applying it in new and novel ways. These heuristics have evolved over time to include methods for estimating technical complexity, technology development, cost modeling and mission risk in the unique context of deep space missions. This paper examines the processes involved in performing these advanced concepts studies, and analyzes the application of heuristics in the development of an advanced in-situ planetary mission. The Venus Surface Sample Return mission study provides a context for the examination of the heuristics applied in the development of the mission and systems architecture. This study is illustrative of the effort involved in the initial assessment of an advance mission concept, and the knowledge and tools that are applied.

Feasibility Study of Solar Photovoltaics on Landfills in Puerto Rico (Second Study)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salasovich, J.; Mosey, G.

2011-08-01

This report presents the results of an assessment of the technical and economic feasibility of deploying a solar photovoltaics (PV) system on landfill sites in Puerto Rico. The purpose of this report is to assess the landfills with the highest potential for possible solar PV installation and estimate cost, performance, and site impacts of three different PV options: crystalline silicon (fixed tilt), crystalline silicon (single-axis tracking), and thin film (fixed tilt). The report outlines financing options that could assist in the implementation of a system. According to the site production calculations, the most cost-effective system in terms of return onmore » investment is the thin-film fixed-tilt technology. The report recommends financing options that could assist in the implementation of such a system. The landfills and sites considered in this report were all determined feasible areas in which to implement solar PV systems.« less

The Feasibility of Utilizing Wind Energy in Commercial Buildings With Special Reference to the Kingdom of Bahrain

NASA Astrophysics Data System (ADS)

Abdulrahim Saeed, Saeed

2017-11-01

This article shall investigate the feasibility of utilizing wind energy for commercial buildings with special reference to the Kingdom of Bahrain. Bahrain World Trade Center which was built in 2008, is located in the city of Manama. The fifty-story complex contains identical twin towers that rise over 240 meters in height. The towers are connected by three bridges which hold three turbines each 29 meters long. The three turbines were originally design to provide electric energy required for lighting. The Bahrain World Trade Center was selected as a case study to investigate the feasibility of utilizing wind energy technologies in skyscrapers with special reference to the Kingdom of Bahrain. It is hoped that the findings and conclusion of the study shall be of some value for future utilization of wind energy in the GCC countries and the world at large.

Auto-disable syringes for immunization: issues in technology transfer.

PubMed Central

Lloyd, J. S.; Milstien, J. B.

1999-01-01

WHO and its partners recommend the use of auto-disable syringes, "bundled" with the supply of vaccines when donor dollars are used, in all mass immunization campaigns, and also strongly advocate their use in routine immunization programmes. Because of the relatively high price of auto-disable syringes, WHO's Technical Network for Logistics in Health recommends that activities be initiated to encourage the transfer of production technology for these syringes as a means of promoting their use and enhancing access to the technology. The present article examines factors influencing technology transfer, including feasibility, corporate interest, cost, quality assurance, intellectual property considerations, and probable time frames for implementation. Technology transfer activities are likely to be complex and difficult, and may not result in lower prices for syringes. Guidelines are offered on technology transfer initiatives for auto-disable syringes to ensure the quality of the product, the reliability of the supply, and the feasibility of the technology transfer activity itself. PMID:10680248

In vivo quantification of lead in bone with a portable x-ray fluorescence system--methodology and feasibility.

PubMed

Nie, L H; Sanchez, S; Newton, K; Grodzins, L; Cleveland, R O; Weisskopf, M G

2011-02-07

This study was conducted to investigate the methodology and feasibility of developing a portable x-ray fluorescence (XRF) technology to quantify lead (Pb) in bone in vivo. A portable XRF device was set up and optimal settings of voltage, current, and filter combination for bone lead quantification were selected to achieve the lowest detection limit. The minimum radiation dose delivered to the subject was calculated by Monte Carlo simulations. An ultrasound device was used to measure soft tissue thickness to account for signal attenuation, and an alternative method to obtain soft tissue thickness from the XRF spectrum was developed and shown to be equivalent to the ultrasound measurements (intraclass correlation coefficient, ICC = 0.82). We tested the correlation of in vivo bone lead concentrations between the standard KXRF technology and the portable XRF technology. There was a significant correlation between the bone lead concentrations obtained from the standard KXRF technology and those obtained from the portable XRF technology (ICC = 0.65). The detection limit for the portable XRF device was about 8.4 ppm with 2 mm soft tissue thickness. The entrance skin dose delivered to the human subject was about 13 mSv and the total body effective dose was about 1.5 µSv and should pose minimal radiation risk. In conclusion, portable XRF technology can be used for in vivo bone lead measurement with sensitivity comparable to the KXRF technology and good correlation with KXRF measurements.

In Vivo Quantification of Lead in Bone with a Portable X-ray Fluorescence (XRF) System – Methodology and Feasibility

PubMed Central

Nie, LH; Sanchez, S; Newton, K; Grodzins, L; Cleveland, RO; Weisskopf, MG

2013-01-01

This study was conducted to investigate the methodology and feasibility of developing a portable XRF technology to quantify lead (Pb) in bone in vivo. A portable XRF device was set up and optimal setting of voltage, current, and filter combination for bone lead quantification were selected to achieve the lowest detection limit. The minimum radiation dose delivered to the subject was calculated by Monte Carlo simulations. An ultrasound device was used to measure soft tissue thickness to account for signal attenuation, and an alternative method to obtain soft tissue thickness from the XRF spectrum was developed and shown to be equivalent to the ultrasound measurements (Intraclass Correlation Coefficient, ICC=0.82). We tested the correlation of in vivo bone lead concentrations between the standard KXRF technology and the portable XRF technology. There was a significant correlation between the bone lead concentrations obtained from the standard KXRF technology and those obtained from the portable XRF technology (ICC=0.65). The detection limit for the portable XRF device was about 8.4 ppm with 2 mm soft tissue thickness. The entrance skin dose delivered to the human subject was about 13 mSv and the total body effective dose was about 1.5 μSv and should pose a minimal radiation risk. In conclusion, portable XRF technology can be used for in vivo bone lead measurement with sensitivity comparable to the KXRF technology and good correlation with KXRF measurements. PMID:21242629

Automated array assembly task, phase 1

NASA Technical Reports Server (NTRS)

Carbajal, B. G.

1977-01-01

State-of-the-art technologies applicable to silicon solar cell and solar cell module fabrication were assessed. The assessment consisted of a technical feasibility evaluation and a cost projection for high volume production of solar cell modules. Design equations based on minimum power loss were used as a tool in the evaluation of metallization technologies. A solar cell process sensitivity study using models, computer calculations, and experimental data was used to identify process step variation and cell output variation correlations.

OPTIMIZING BIOVENTING IN SHALLOW VADOSE ZONES AND COLD CLIMATES

EPA Science Inventory

This paper describes a bioventing study design and initial activities applied to a JP-4 jet fuel spill at Eielson Air Force Base, Alaska. The primary objectives of the project were to investigate the feasibility of using bioventing technology to remediate JP-4 jet fuel contaminat...

Integration of New Technology in Army Libraries. Appendices.

ERIC Educational Resources Information Center

DAMANS and Associates, Rockville, MD.

Eight appendices provide information related to a study which was conducted to determine the feasibility of introducing new automatic techniques to Army library technical processing activities; to examine and recommend appropriate systems and configurations for library automation; and to determine costs of implementing the recommendations. The…

Use of Infrared Thermography for the Inspection of Welds in the Shop and Field

DOT National Transportation Integrated Search

2017-12-01

This report represents an initial, proof-of-concept study to explore the feasibility of infrared ultra-time domain (IR-UTD) technology for the detection of defects in welds. The report includes two primary sections. The first section provides some ba...

ARRAY TECHNOLOGY AS A TOOL TO MONITOR ENDOCRINE DISRUPTION IN WILD FISH POPULATIONS

EPA Science Inventory

A variety of anthropogenic chemicals are capable of binding to the estrogen receptor of vertebrate species. Binding of these compounds can interfere with homeostasis by disrupting normal gene expression patterns. The purpose of this study was to investigate the feasibility of ap...

CONTROL TECHNOLOGY EVALUATION FOR GASOLINE LOADING OF BARGES

EPA Science Inventory

The report gives results of a study to determine the feasibility, safety, and cost of methods to control the emission of hydrocarbon vapor during the loading of gasoline barges. Approximately 4 lb of hydrocarbons are emitted per 1000 gal. of gasoline loaded; annually about 1 mill...

Information technology feasibility study for the Washington State commercial vehicle information systems and networks (CVISN) pilot project

DOT National Transportation Integrated Search

1998-01-08

The CVISN Pilot Project will prototype the use of a comprehensive interface to state and federal motor carrier data systems and will deliver real-time, decision-making information to weigh stations and commercial vehicle enforcement officers. In addi...

Shipboard Wireless Sensor Networks Utilizing Zigbee Technology

DTIC Science & Technology

2006-09-01

This thesis studies the feasibility of utilizing Zigbee standard devices to create a shipboard wireless sensor network . Two primary methods were used...the research effort would be a completely wireless sensor network which would result in a net savings in man hours required to maintain and monitor

NGST Yardstick Integrated Science Instrument Module (ISIM) Feasibility Study

NASA Astrophysics Data System (ADS)

Greenhouse, M. A.; Dipirro, M.; Federline, B.; Gardner, Jonathan P.; Guy, P.; Hagopian, J.; Hein, J.; Jurotich, M.; Lawrence, J.; Martineau, B.; Mather, J. C.; Mentzell, E.; Satyapal, S.; Stanley, D.; Teplitz, H. I.; Travis, J.; Bely, P.; Petro, L. D.; Stockman, P.; Burg, R.; Bitzel, R.

1998-12-01

We display portions of the baseline design concept for the NGST Integrated Science Instrument Module (ISIM). This ISIM design is under ongoing development for integration with the "Yardstick" and other NGST 8 m architectures that are intended for packaging in an EELV or Ariane 5 meter class fairing. The goals of this activity are to: [1] demonstrate mission science feasibility, [2] identify ISIM technology challenge areas, [3] assess ISIM engineering and cost feasibility, [5] identify ISIM/NGST interface constraints, and [6] enable smart customer procurement of the ISIM. In this poster, we display a snap shot of work in progress including: optical design, opto-mechanical layout, thermal modeling, focal plane array design, and electronics design. Ongoing progress can be monitored via ISIM team web site: http://ngst.gsfc.nasa.gov/

Sensing Hazards with Operational Unmanned Technology

NASA Astrophysics Data System (ADS)

Hood, R. E.

2016-12-01

The Unmanned Aircraft Systems (UAS) Program of the National Oceanic and Atmospheric Administration (NOAA) is working with the National Weather Service, the National Ocean Service, other Federal agencies, private industry, and academia to evaluate the feasibility of UAS observations to provide time critical information needed for situational awareness, prediction, warning, and damage assessment of hazards. This activity is managed within a portfolio of projects entitled "Sensing Hazards with Operational Unmanned Technology (SHOUT)." The diversity of this portfolio includes evaluations of high altitude UAS observations for high impact oceanic storms prediction to low altitude UAS observations of rivers, severe storms, and coastal areas for pre-hazard situational awareness and post-hazard damage assessments. Each SHOUT evaluation project begins with a proof-of-concept field demonstration of a UAS observing strategy for a given hazard and then matures to joint studies of both scientific data impact along with cost and operational feasibility of the observing strategy for routine applications. The technology readiness and preliminary evaulation results will be presented for several UAS observing strategies designed for improved observations of oceanic storms, floods, severe storms, and coastal ecosystem hazards.

Surface 12 lead electrocardiogram recordings using smart phone technology.

PubMed

Baquero, Giselle A; Banchs, Javier E; Ahmed, Shameer; Naccarelli, Gerald V; Luck, Jerry C

2015-01-01

AliveCor ECG is an FDA approved ambulatory cardiac rhythm monitor that records a single channel (lead I) ECG rhythm strip using an iPhone. In the past few years, the use of smartphones and tablets with health related applications has significantly proliferated. In this initial feasibility trial, we attempted to reproduce the 12 lead ECG using the bipolar arrangement of the AliveCor monitor coupled to smart phone technology. We used the AliveCor heart monitor coupled with an iPhone cellular phone and the AliveECG application (APP) in 5 individuals. In our 5 individuals, recordings from both a standard 12 lead ECG and the AliveCor generated 12 lead ECG had the same interpretation. This study demonstrates the feasibility of creating a 12 lead ECG with a smart phone. The validity of the recordings would seem to suggest that this technology could become an important useful tool for clinical use. This new hand held smart phone 12 lead ECG recorder needs further development and validation. Copyright © 2015 Elsevier Inc. All rights reserved.

[Investigation on Spray Drying Technology of Auricularia auricular Extract].

PubMed

Zhou, Rong; Chen, Hui; Xie, Yuan; Chen, Peng; Wang, Luo-lin

2015-07-01

To investigate the feasibility of spray drying technology of Auricularia auricular extract and its optimum process. On the basis of single factor test, with the yield of dry extract and the content of polysaccharide as indexes, orthogonal test method was used to optimize the spray drying technology on the inlet air temperature, injection speed and crude drug content. Using ultraviolet spectrophotometry, thin layer chromatography(TLC) and pharmacodynamics as indicators, extracts prepared by traditional alcohol precipitation drying process and spray drying process were compared. Compared with the traditional preparation method, the extract prepared by spray drying had little differences from the polysaccharide content, TLC and the function of reducing TG and TC, and its optimum technology condition were as follows: The inlet air temperature was 180 °C, injection speed was 10 ml/min and crude drugs content was 0. 4 g/mL. Auricularia auricular extract by spray drying technology is stable and feasible with high economic benefit.

Technologies for Detecting Falsified and Substandard Drugs in Low and Middle-Income Countries

PubMed Central

Kovacs, Stephanie; Hawes, Stephen E.; Maley, Stephen N.; Mosites, Emily; Wong, Ling; Stergachis, Andy

2014-01-01

Falsified and substandard drugs are a global health problem, particularly in low- and middle-income countries (LMIC) that have weak pharmacovigilance and drug regulatory systems. Poor quality medicines have important health consequences, including the potential for treatment failure, development of antimicrobial resistance, and serious adverse drug reactions, increasing healthcare costs and undermining the public's confidence in healthcare systems. This article presents a review of the methods employed for the analysis of pharmaceutical formulations. Technologies for detecting substandard and falsified drugs were identified primarily through literature reviews. Key-informant interviews with experts augmented our methods when warranted. In order to aid comparisons, technologies were assigned a suitability score for use in LMIC ranging from 0–8. Scores measured the need for electricity, need for sample preparation, need for reagents, portability, level of training required, and speed of analysis. Technologies with higher scores were deemed the most feasible in LMICs. We categorized technologies that cost $10,000 USD or less as low cost, $10,000–100,000 USD as medium cost and those greater than $100,000 USD as high cost technologies (all prices are 2013 USD). This search strategy yielded information on 42 unique technologies. Five technologies were deemed both low cost and had feasibility scores between 6–8, and an additional four technologies had medium cost and high feasibility. Twelve technologies were deemed portable and therefore could be used in the field. Many technologies can aid in the detection of substandard and falsified drugs that vary from the simplest of checklists for packaging to the most complex mass spectrometry analyses. Although there is no single technology that can serve all the requirements of detecting falsified and substandard drugs, there is an opportunity to bifurcate the technologies into specific niches to address specific sections within the workflow process of detecting products. PMID:24671033

PILOT-SCALE EVALUATION OF THE IRON-ENHANCED DECHLORINATION TECHNOLOGY FOR REMEDIATION OF CONTAMINATED GROUNDWATER

EPA Science Inventory

An iron-enhanced dechlorination technology was evaluated, under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) program, at a contaminated printed circuit board manufacturing site in New Jersey. This paper describes the feasibility...

Review of the Tri-Agency Space Nuclear Reactor Power System Technology Program

NASA Technical Reports Server (NTRS)

Ambrus, J. H.; Wright, W. E.; Bunch, D. F.

1984-01-01

The Space Nuclear Reactor Power System Technology Program designated SP-100 was created in 1983 by NASA, the U.S. Department of Defense, and the Defense Advanced Research Projects Agency. Attention is presently given to the development history of SP-100 over the course of its first year, in which it has been engaged in program objectives' definition, the analysis of civil and military missions, nuclear power system functional requirements' definition, concept definition studies, the selection of primary concepts for technology feasibility validation, and the acquisition of initial experimental and analytical results.

Social network supported process recommender system.

PubMed

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced.

Applications of aerospace technology to petroleum exploration. Volume 1: Efforts and results

NASA Technical Reports Server (NTRS)

Jaffe, L. D.

1976-01-01

The feasibility of applying aerospace techniques to help solve significant problems in petroleum exploration is studied. Through contacts with petroleum industry and petroleum service industry, important petroleum exploration problems were identified. For each problem, areas of aerospace technology that might aid in its solution were also identified where possible. Topics selected for investigation include: seismic reflection systems; down-hole acoustic techniques; identification of geological analogies; drilling methods; remote geological sensing; and sea floor imaging and mapping. Specific areas of aerospace technology are applied to 21 concepts formulated from the topics of concern.

Feasibility study of a novel miniaturized spectral imaging system architecture in UAV surveillance

NASA Astrophysics Data System (ADS)

Liu, Shuyang; Zhou, Tao; Jia, Xiaodong; Cui, Hushan; Huang, Chengjun

2016-01-01

The spectral imaging technology is able to analysis the spectral and spatial geometric character of the target at the same time. To break through the limitation brought by the size, weight and cost of the traditional spectral imaging instrument, a miniaturized novel spectral imaging based on CMOS processing has been introduced in the market. This technology has enabled the possibility of applying spectral imaging in the UAV platform. In this paper, the relevant technology and the related possible applications have been presented to implement a quick, flexible and more detailed remote sensing system.

An interactive distance solution for stroke rehabilitation in the home setting - A feasibility study.

PubMed

Palmcrantz, Susanne; Borg, Jörgen; Sommerfeld, Disa; Plantin, Jeanette; Wall, Anneli; Ehn, Maria; Sjölinder, Marie; Boman, Inga-Lill

2017-09-01

In this study an interactive distance solution (called the DISKO tool) was developed to enable home-based motor training after stroke. The overall aim was to explore the feasibility and safety of using the DISKO-tool, customized for interactive stroke rehabilitation in the home setting, in different rehabilitation phases after stroke. Fifteen patients in three different stages in the continuum of rehabilitation after stroke participated in a home-based training program using the DISKO-tool. The program included 15 training sessions with recurrent follow-ups by the integrated application for video communication with a physiotherapist. Safety and feasibility were assessed from patients, physiotherapists, and a technician using logbooks, interviews, and a questionnaire. Qualitative content analysis and descriptive statistics were used in the analysis. Fourteen out of 15 patients finalized the training period with a mean of 19.5 minutes spent on training at each session. The DISKO-tool was found to be useful and safe by patients and physiotherapists. This study demonstrates the feasibility and safety of the DISKO-tool and provides guidance in further development and testing of interactive distance technology for home rehabilitation, to be used by health care professionals and patients in different phases of rehabilitation after stroke.

Small reactor power systems for manned planetary surface bases

NASA Technical Reports Server (NTRS)

Bloomfield, Harvey S.

1987-01-01

A preliminary feasibility study of the potential application of small nuclear reactor space power systems to manned planetary surface base missions was conducted. The purpose of the study was to identify and assess the technology, performance, and safety issues associated with integration of reactor power systems with an evolutionary manned planetary surface exploration scenario. The requirements and characteristics of a variety of human-rated modular reactor power system configurations selected for a range of power levels from 25 kWe to hundreds of kilowatts is described. Trade-off analyses for reactor power systems utilizing both man-made and indigenous shielding materials are provided to examine performance, installation and operational safety feasibility issues. The results of this study have confirmed the preliminary feasibility of a wide variety of small reactor power plant configurations for growth oriented manned planetary surface exploration missions. The capability for power level growth with increasing manned presence, while maintaining safe radiation levels, was favorably assessed for nominal 25 to 100 kWe modular configurations. No feasibility limitations or technical barriers were identified and the use of both distance and indigenous planetary soil material for human rated radiation shielding were shown to be viable and attractive options.

Feasibility study of an Integrated Program for Aerospace vehicle Design (IPAD) Volume 7: IPAD benefits and impact

NASA Technical Reports Server (NTRS)

Hansen, S. D.; Southall, J. W.

1973-01-01

The potential benefits, impact and spinoff of IPAD technology are described. The benefits are projected from a flowtime and labor cost analysis of the design process and a study of the flowtime and labor cost savings being experienced with existing integrated systems. Benefits in terms of designer productivity, company effectiveness, and IPAD as a national resource are developed. A description is given of the potential impact of information handling as an IPAD technology, upon task and organization structure and people who use IPAD. Spinoff of IPAD technology to nonaerospace industries is discussed. The results of a personal survey made of aerospace, nonaerospace, government and university sources are given.

Potential benefits for propfan technology on derivatives of future short- to medium-range transport aircraft

NASA Technical Reports Server (NTRS)

Goldsmith, I. M.; Bowles, J. V.

1980-01-01

It is noted that several NASA-sponsored studies have identified a substantial potential fuel savings for high subsonic speed aircraft utilizing the propfan concept compared to the equivalent technology turbofan aircraft. Attention is given to a feasibility study for propfan-powered short- to medium-haul commercial transport aircraft conducted to evaluate potential fuel savings and identify critical technology requirements using the latest propfan performance data. An analysis is made of the design and performance characteristics of a wing-mounted and two-aft-mounted derivative propfan aircraft configurations, based on a DC-9 Super 80 airframe, which are compared to the baseline turbofan design. Finally, recommendations for further research efforts are also made.

A Pilot Study of an Online Workplace Nutrition Program: The Value of Participant Input in Program Development

ERIC Educational Resources Information Center

Cousineau, Tara; Houle, Brian; Bromberg, Jonas; Fernandez, Kathrine C.; Kling, Whitney C.

2008-01-01

Objective: Tailored nutrition Web programs constitute an emerging trend in obesity prevention. Initial investment in innovative technology necessitates that the target population be well understood. This pilot study's purpose was to determine the feasibility of a workplace nutrition Web program. Design: Formative research was conducted with gaming…

Research and Practice on College English Oral Test--A Case Study of Beijing Institute of Petrochemical Technology

ERIC Educational Resources Information Center

Yan, Jiaolan; Zhang, Weiran; Yu, Yuan; Chang, Jie; Ding, Guangwei

2015-01-01

Based on the description of implementation of College English oral test from the points of the necessity, feasibility, and implementation process, this study analyzed the current situation of university students' oral English, oral English ability, the college entrance examination results, and a band-4 written test and established their…

Preliminary study on quality evaluation of pecans with terahertz time-domain spectroscopy

NASA Astrophysics Data System (ADS)

Li, Bin; Cao, Wei; Mathanker, Sunil; Zhang, Weili; Wang, Ning

2010-11-01

This paper reports a preliminary work on a feasibility study of applying terahertz (THz) technology for pecan quality evaluation. A set of native pecan nuts collected in 2009 were used during the experiment. Each pecan nutmeat was manually sliced at a thickness of about 1mm, 2mm, and 3mm and a size of about 2cm (length) ×1cm (width). Pecan shell and inner separator were also cut into the same size. The absorption spectra for the nutmeat slices, shell, and inner separator were collected using a THz time-domain spectroscopy (THz-TDS) developed by a group of researchers at Oklahoma State University. The test results show that nutmeat, shell, and inner separator had different absorption characteristics within the bandwidth of 0.2-2.0 THz. To study the capability of insect damage detection of the THz spectroscopy, the absorption spectra of insects (living manduca sexta and dry pecan weevil) were also collected. Due to high water contents in the insects, very obvious spectral characteristics were found. The results from the preliminary study show a potential of THz technology applied for quality detection of bio-products. However, since bio-products mostly have high water content and are handled under an environment with certain levels of water content, practical issues needs to be further investigated to make the THz technology a feasible tool for quality evaluation.

US-Canada Great Lakes Regional Specimen Bank Feasibility Study.

PubMed

Kerry, A; Edmonds, C J; Landon, L; Yonker, T L

1993-11-01

A study to examine the feasibility of establishing a Regional Specimen Bank in the Great Lakes area of the United States and Canada has recently been initiated by the Michigan Audubon Society. There are several existing formal and informal specimen banking facilities active in the region but their combined adequacy has not been evaluated. This feasibility study will establish the need and use of a regional bank and the institution(s) necessary to satisfy this need will be recommended. The study will address the scope required to meet present and future needs including the types of specimens to be represented in the bank, geographic coverage and protocols for collection, shipping, processing, analysis and storage. A management policy of the bank will be developed encompassing business operation, costs, governing structure and personnel requirements. The legal requirements of the bank will be determined with regards to the acquisition of samples, transport across national boundaries, access to specimens and information, and liability during operation. An effective information dissemination network will be recommended that is compatible with national and international partners, will facilitate technology and information transfer and support the quality and status of the bank. Determination of secure, long-term funding sources will be one of the key elements to ensuring a safe repository. This feasibility study is funded by the Great Lakes Protection Fund.

Feasibility of flywheel energy storage systems for applications in future space missions

NASA Technical Reports Server (NTRS)

Santo, G. Espiritu; Gill, S. P.; Kotas, J. F.; Paschall, R.

1995-01-01

The objective of this study was to examine the overall feasibility of deploying electromechanical flywheel systems in space used for excess energy storage. Results of previous Rocketdyne studies have shown that the flywheel concept has a number of advantages over the NiH2 battery, including higher specific energy, longer life and high roundtrip efficiency. Based on this prior work, this current study was broken into four subtasks. The first subtask investigated the feasibility of replacing the NiH2 battery orbital replacement unit (ORU) on the international space station (ISSA) with a flywheel ORU. In addition, a conceptual design of a generic flywheel demonstrator experiment implemented on the ISSA was completed. An assessment of the life cycle cost benefits of replacing the station battery energy storage ORU's with flywheel ORU's was performed. A fourth task generated a top-level development plan for critical flywheel technologies, the flywheel demonstrator experiments and its evolution into the production unit flywheel replacement ORU.

Feasibility study of molecular memory device based on DNA using methylation to store information

NASA Astrophysics Data System (ADS)

Jiang, Liming; Qiu, Wanzhi; Al-Dirini, Feras; Hossain, Faruque M.; Evans, Robin; Skafidas, Efstratios

2016-07-01

DNA, because of its robustness and dense information storage capability, has been proposed as a potential candidate for next-generation storage media. However, encoding information into the DNA sequence requires molecular synthesis technology, which to date is costly and prone to synthesis errors. Reading the DNA strand information is also complex. Ideally, DNA storage will provide methods for modifying stored information. Here, we conduct a feasibility study investigating the use of the DNA 5-methylcytosine (5mC) methylation state as a molecular memory to store information. We propose a new 1-bit memory device and study, based on the density functional theory and non-equilibrium Green's function method, the feasibility of electrically reading the information. Our results show that changes to methylation states lead to changes in the peak of negative differential resistance which can be used to interrogate memory state. Our work demonstrates a new memory concept based on methylation state which can be beneficial in the design of next generation DNA based molecular electronic memory devices.

Integrated Power and Attitude Control Systems for Space Station

NASA Technical Reports Server (NTRS)

Oglevie, R. E.; Eisenhaure, D. B.

1985-01-01

Integrated Power and Attitude Control Systems (IPACS) studies performed over a decade ago established the feasibility of simultaneously storing electrical energy in wheels and utilizing the resulting momentum for spacecraft attitude control. It was shown that such a system possessed many advantages over other contemporary energy storage and attitude control systems in many applications. More recent technology advances in composite rotors, magnetic bearings, and power control electronics have triggered new optimism regarding the feasibility and merits of such a system. The paper presents the results of a recent study whose focus was to define an advanced IPACS and to evaluate its merits for the Space Station application. A system and component design concept is developed to establish the system performance capability. A system level trade study, including life-cycle costing, is performed to define the merits of the system relative to two other candidate systems. It is concluded that an advanced IPACS concept is not only feasible, but offers substantial savings in mass, and life-cycle cost.

Solar Sail Propulsion: Enabling New Capabilities for Heliophysics

NASA Technical Reports Server (NTRS)

Johnson, L.; Young, R.; Alhorn, D.; Heaton, A.; Vansant, T.; Campbell, B.; Pappa, R.; Keats, W.; Liewer, P. C.; Alexander, D.;

Feasibility study of microprocessor systems suitable for use in developing a real-time for the 4.75 GHz scatterometer

NASA Technical Reports Server (NTRS)

1977-01-01

A class of signal processors suitable for the reduction of radar scatterometer data in real time was developed. The systems were applied to the reduction of single polarized 13.3 GHz scatterometer data and provided a real time output of radar scattering coefficient as a function of incident angle. It was proposed that a system for processing of C band radar data be constructed to support scatterometer system currently under development. The establishment of a feasible design approach to the development of this processor system utilizing microprocessor technology was emphasized.

The space station assembly phase: Flight telerobotic servicer feasibility. Volume 2: Methodology and case study

NASA Technical Reports Server (NTRS)

Smith, Jeffrey H.; Gyamfi, Max A.; Volkmer, Kent; Zimmerman, Wayne F.

1987-01-01

A methodology is described for examining the feasibility of a Flight Telerobotic Servicer (FTS) using two assembly scenarios, defined at the EVA task level, for the 30 shuttle flights (beginning with MB-1) over a four-year period. Performing all EVA tasks by crew only is compared to a scenario in which crew EVA is augmented by FTS. A reference FTS concept is used as a technology baseline and life-cycle cost analysis is performed to highlight cost tradeoffs. The methodology, procedure, and data used to complete the analysis are documented in detail.

Optical Isolator Utilizing Surface Plasmons

PubMed Central

Zayets, Vadym; Saito, Hidekazu; Ando, Koji; Yuasa, Shinji

2012-01-01

Feasibility of usage of surface plasmons in a new design of an integrated optical isolator has been studied. In the case of surface plasmons propagating at a boundary between a transition metal and a double-layer dielectric, there is a significant difference of optical loss for surface plasmons propagating in opposite directions. Utilizing this structure, it is feasible to fabricate a competitive plasmonic isolator, which benefits from a broad wavelength operational bandwidth and a good technological compatibility for integration into the Photonic Integrated Circuits (PIC). The linear dispersion relation was derived for plasmons propagating in a multilayer magneto-optical slab. PMID:28817012

Application of hot-melt extrusion technology in immediate-release abuse-deterrent formulations.

PubMed

Wening, Klaus; Schwier, Sebastian; Stahlberg, Hans-J; Galia, Eric

Hot-melt extrusion (HME) technology has been used for manufacturing extended-release abuse-deterrent formulations (ADFs) of opioid-type analgesics with improved tamper-resistant properties. Our objective was to describe application of this technology to immediate-release (IR) ADFs. For development of a sample IR ADF (hydrocodone 10 mg/acetaminophen 325 mg) based on HME, feasibility studies were performed using different excipients. The formulation selected for further development was evaluated via in vitro test battery. Moreover, in vivo performance of IR ADF technologies was investigated in an open-label, randomized, cross-over, phase 1, relative oral bioavailability study with another opioid (model compound). Single-center bioavailability trial. Twenty-four healthy white male subjects. ADF IR formulation of an opioid and marketed IR formulation. For feasibility and in vitro studies, dissolution profiles, syringeability, particle size distribution after physical manipulation, and extractability were evaluated. For the phase 1 study, pharmacokinetic parameters were evaluated and compared for ADF IR and a marketed IR formulation. After manipulation, the majority of particles from the ADF IR formulation were >500µm and, thus, not considered suitable for intranasal abuse, while the majority of particles for the reference marketed IR formulation were <500µm. The ADF IR formulation was resistant to syringing and preparation for potential intravenous injection. In healthy subjects, pharmacokinetics of an ADF and marketed IR formulation of an opioid were nearly identical. Application of HME to IR formulations led to development of products with improved mechanical resistance to manipulation for intranasal or intravenous preparation, but similar bioavailability.

76 FR 66040 - Announcement of Meeting To Explore Feasibility of Establishing a NIST/Industry Consortium on...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

... Explore Feasibility of Establishing a NIST/Industry Consortium on ``Concrete Rheology: Enabling Metrology... meeting. SUMMARY: The National Institute of Standards and Technology (NIST) invites interested parties to attend a pre-consortium meeting on November 8, [[Page 66041

Cryogenic Tank Technology Program (CTTP)

NASA Technical Reports Server (NTRS)

Vaughn, T. P.

2001-01-01

The objectives of the Cryogenic Tank Technology Program were to: (1) determine the feasibility and cost effectiveness of near net shape hardware; (2) demonstrate near net shape processes by fabricating large scale-flight quality hardware; and (3) advance state of current weld processing technologies for aluminum lithium alloys.

DOE studies on coal-to-liquids

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2007-07-01

The US DOE National Energy Technology Laboratory has issued reports that examine the feasibility of coal-to-liquids (CTL) facilities, both general and site specific, which are available at www.netl.gov/energy-analyses/ref-shelf.html. The US Department of Defence has been investigating use of Fischer-Tropsch fuels. Congress is considering various CTL proposals while the private sector is building pilot plants and performing feasibility studies for proposed plants. The article includes a table listing 14 coal-to-liquids plants under consideration. The private sector has formed the coal-to-liquids coalition (www.futurecoalfuels.org). The article mentions other CTL projects in South Africa, China, Indonesia, the Philippines and New Zealand. 1 tab.

Screening study for evaluation of the potential for system 80+ to consume excess plutonium - Volume 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-04-30

As part of the U.S. effort to evaluate technologies offering solutions for the safe disposal or utilization of surplus nuclear materials, the fiscal year 1993 Energy and Water Appropriations legislation provided the Department of Energy (DOE) the necessary funds to conduct multi-phased studies to determine the technical feasibility of using reactor technologies for the triple mission of burning weapons grade plutonium, producing tritium for the existing smaller weapons stockpile, and generating commercial electricity. DOE limited the studies to five advanced reactor designs. Among the technologies selected is the ABB-Combustion Engineering (ABB-CE) System 80+. The DOE study, currently in Phase ID,more » is proceeding with a more detailed evaluation of the design`s capability for plutonium disposition.« less

Feasibility of a real-time hand hygiene notification machine learning system in outpatient clinics.

PubMed

Geilleit, R; Hen, Z Q; Chong, C Y; Loh, A P; Pang, N L; Peterson, G M; Ng, K C; Huis, A; de Korne, D F

2018-04-09

Various technologies have been developed to improve hand hygiene (HH) compliance in inpatient settings; however, little is known about the feasibility of machine learning technology for this purpose in outpatient clinics. To assess the effectiveness, user experiences, and costs of implementing a real-time HH notification machine learning system in outpatient clinics. In our mixed methods study, a multi-disciplinary team co-created an infrared guided sensor system to automatically notify clinicians to perform HH just before first patient contact. Notification technology effects were measured by comparing HH compliance at baseline (without notifications) with real-time auditory notifications that continued till HH was performed (intervention I) or notifications lasting 15 s (intervention II). User experiences were collected during daily briefings and semi-structured interviews. Costs of implementation of the system were calculated and compared to the current observational auditing programme. Average baseline HH performance before first patient contact was 53.8%. With real-time auditory notifications that continued till HH was performed, overall HH performance increased to 100% (P < 0.001). With auditory notifications of a maximum duration of 15 s, HH performance was 80.4% (P < 0.001). Users emphasized the relevance of real-time notification and contributed to technical feasibility improvements that were implemented in the prototype. Annual running costs for the machine learning system were estimated to be 46% lower than the observational auditing programme. Machine learning technology that enables real-time HH notification provides a promising cost-effective approach to both improving and monitoring HH, and deserves further development in outpatient settings. Copyright © 2018 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Ethanol production from food waste at high solid contents with vacuum recovery technology

USDA-ARS?s Scientific Manuscript database

Ethanol production from food wastes does not only solve the environmental issues but also provide renewable biofuel to partially substitute fossil fuels. This study investigated the feasibility of utilization of food wastes for producing ethanol at high solid contents (35%, w/w). Vacuum recovery sys...

Energy stores and switches for rail-launcher systems

NASA Technical Reports Server (NTRS)

Weldon, W. F.; Zowarka, R. C.; Marshall, R. A.

1983-01-01

An overview of existing switch and power supply technology applicable to space launch, a new candidate pulsed power supply for Earth-to-space rail launcher duty, the inverse railgun flux compressor, and a set of switching experiments to study further the feasibility of Earth-to-space launch are discussed.

Guaranteed LiDAR-aided multi-object tracking at road intersections : USDOT Region V Regional University Transportation Center final report.

DOT National Transportation Integrated Search

2016-12-21

The ability to accurately measure and cost-effectively collect traffic data at road intersections is needed to improve their safety and operations. This study investigates the feasibility of using laser ranging technology (LiDAR) for this purpose. Th...

Modeling of Defects in Transparent Ceramics for Improving Military Armor

DTIC Science & Technology

2009-06-01

UCRL -50694, University of California, Liveromore. 2. Gatti,A & Noone, M J, Feasibility Study for Producing Transparent Spinel (MgAl2O4), AMMRC-CR-70...J GOLDWASSER 3701 N FAIRFAX DR ARLINGTON VA 22217-5600 2 DIRECTED TECHNOLOGIES INC J PEREZ R SANDS 3601 WILSON BLVD STE 650

FEASIBILITY STUDY TO DEMONSTRATE APPLICABILITY OF TUNABLE INFRARED LASER EMISSION SPECTROSCOPY TECHNOLOGY TO MEASURE AIR POLLUTION

EPA Science Inventory

This project involves the real-time measurement of air quality using open-path IR spectroscopy. A prototype open-path tunable laser absorption spectroscopy instrument was designed, built, and successfully operated for several hundred hours between October and December 2000. The...

Energy stores and switches for rail-launcher systems

NASA Astrophysics Data System (ADS)

Weldon, W. F.; Zowarka, R. C.; Marshall, R. A.

An overview of existing switch and power supply technology applicable to space launch, a new candidate pulsed power supply for Earth-to-space rail launcher duty, the inverse railgun flux compressor, and a set of switching experiments to study further the feasibility of Earth-to-space launch are discussed.

Sub-millimetre-wave and far infrared ESA missions with a focus on antenna technologies

NASA Astrophysics Data System (ADS)

de Maagt, Peter; Polegre, Arturo; Crone, Gerry

2017-11-01

The are of (sub)millimetre wave and far-infrared antenna technology is a very dynamic sector in electromagnetics. Several future ESA missions have been planned and their requirements are pushing the limits of existing technologies. Feasibility studies have provided baseline concepts, which have helped to grasp the main features of these instruments and to identify their critical aspects. A number of scientific and technical activities have then followed, dedicated to specific topics. The paper discusses (sub)millimetre wave and far-infrared Earth observation and astronomical instruments. Furthermore, generic technology work carried out in the frame of ESA contracts, applicable to this frequency range, is reported on.

Novel Low Loss Wide-Band Multi-Port Integrated Circuit Technology for RF/Microwave Applications

NASA Technical Reports Server (NTRS)

Simons, Rainee N.; Goverdhanam, Kavita; Katehi, Linda P. B.; Burke, Thomas P. (Technical Monitor)

2001-01-01

In this paper, novel low loss, wide-band coplanar stripline technology for radio frequency (RF)/microwave integrated circuits is demonstrated on high resistivity silicon wafer. In particular, the fabrication process for the deposition of spin-on-glass (SOG) as a dielectric layer, the etching of microvias for the vertical interconnects, the design methodology for the multiport circuits and their measured/simulated characteristics are graphically illustrated. The study shows that circuits with very low loss, large bandwidth, and compact size are feasible using this technology. This multilayer planar technology has potential to significantly enhance RF/microwave IC performance when combined with semi-conductor devices and microelectromechanical systems (MEMS).

Adopting Quality Assurance Technology in Customer-Vendor Relationships: A Case Study of How Interorganizational Relationships Influence the Process

NASA Astrophysics Data System (ADS)

Heeager, Lise Tordrup; Tjørnehøj, Gitte

Quality assurance technology is a formal control mechanism aiming at increasing the quality of the product exchanged between vendors and customers. Studies of the adoption of this technology in the field of system development rarely focus on the role of the relationship between the customer and vendor in the process. We have studied how the process of adopting quality assurance technology by a small Danish IT vendor developing pharmacy software for a customer in the public sector was influenced by the relationship with the customer. The case study showed that the adoption process was shaped to a high degree by the relationship and vice versa. The prior high level of trust and mutual knowledge helped the parties negotiate mutually feasible solutions throughout the adoption process. We thus advise enhancing trust-building processes to strengthen the relationships and to balance formal control and social control to increase the likelihood of a successful outcome of the adoption of quality assurance technology in a customer-vendor relationship.

Selling the Space Telescope - The interpenetration of science, technology, and politics

NASA Technical Reports Server (NTRS)

Smith, Robert W.

1991-01-01

Attention is given to the politics of initiating the Space Telescope program and to the manner in which the coalition, or working consensus, for the Telescope was assembled, in particular, the role played by astronomers. It is contended that what ensued was a case study in the influence of government patronage on a large-scale scientific and technological program. It is concluded that while a politically feasible Space Telescope did result, in the selling process the Telescope had been both oversold and underfunded.

Hydrogen combustion in tomorrow's energy technology

NASA Astrophysics Data System (ADS)

Peschka, W.

The fundamental characteristics of hydrogen combustion and the current status of hydrogen energy applications technology are reviewed, with an emphasis on research being pursued at DFVLR. Topics addressed include reaction mechanisms and pollution, steady-combustion devices (catalytic heaters, H2/air combustors, H2/O2 rocket engines, H2-fueled jet engines, and gas and steam turbine processes), unsteady combustion (in internal-combustion engines with internal or external mixture formation), and feasibility studies of hydrogen-powered automobiles. Diagrams, drawings, graphs, and photographs are provided.

A Product Development Decision Model for Cockpit Weather Information System

NASA Technical Reports Server (NTRS)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin; Johnson, Edward J., Jr. (Technical Monitor)

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

EOS image data processing system definition study

NASA Technical Reports Server (NTRS)

Gilbert, J.; Honikman, T.; Mcmahon, E.; Miller, E.; Pietrzak, L.; Yorsz, W.

1973-01-01

The Image Processing System (IPS) requirements and configuration are defined for NASA-sponsored advanced technology Earth Observatory System (EOS). The scope included investigation and definition of IPS operational, functional, and product requirements considering overall system constraints and interfaces (sensor, etc.) The scope also included investigation of the technical feasibility and definition of a point design reflecting system requirements. The design phase required a survey of present and projected technology related to general and special-purpose processors, high-density digital tape recorders, and image recorders.

A Product Development Decision Model for Cockpit Weather Information Systems

NASA Technical Reports Server (NTRS)

Sireli, Yesim; Kauffmann, Paul; Gupta, Surabhi; Kachroo, Pushkin

2003-01-01

There is a significant market demand for advanced cockpit weather information products. However, it is unclear how to identify the most promising technological options that provide the desired mix of consumer requirements by employing feasible technical systems at a price that achieves market success. This study develops a unique product development decision model that employs Quality Function Deployment (QFD) and Kano's model of consumer choice. This model is specifically designed for exploration and resolution of this and similar information technology related product development problems.

Are Virtual Rehabilitation Technologies Feasible Models to Scale an Evidence-Based Fall Prevention Program? A Pilot Study Using the Kinect Camera

PubMed Central

Basnett, Jeanna; Chokshi, Anang; Barrett, Mark; Komatireddy, Ravi

2015-01-01

Background Falls in older adults are a significant public health issue. Interventions have been developed and proven effective to reduce falls in older adults, but these programs typically last several months and can be resource intensive. Virtual rehabilitation technologies may offer a solution to bring these programs to scale. Off-the-shelf and custom exergames have demonstrated to be a feasible adjunct to rehabilitation with older adults. However, it is not known if older adults will be able or willing to use a virtual rehabilitation technology to participate in an evidence-based fall prevention program. To have the greatest impact, virtual rehabilitation technologies need to be acceptable to older adults from different backgrounds and level of fall risk. If these technologies prove to be a feasible option, they offer a new distribution channel to disseminate fall prevention programs. Objective Stand Tall (ST) is a virtual translation of the Otago Exercise Program (OEP), an evidence-based fall prevention program. Stand Tall was developed using the Virtual Exercise Rehabilitation Assistant (VERA) software, which uses a Kinect camera and a laptop to deliver physical therapy exercise programs. Our purpose in this pilot study was to explore if ST could be a feasible platform to deliver the OEP to older adults from a variety of fall risk levels, education backgrounds, and self-described level of computer expertise. Methods Adults age 60 and over were recruited to participate in a one-time usability study. The study included orientation to the program, navigation to exercises, and completion of a series of strength and balance exercises. Quantitative analysis described participants and the user experience. Results A diverse group of individuals participated in the study. Twenty-one potential participants (14 women, 7 men) met the inclusion criteria. The mean age was 69.2 (± 5.8) years, 38% had a high school education, 24% had a graduate degree, and 66% classified as “at risk for falls”. Eighteen participants agreed they would like to use ST to help improve their balance, and 17 agreed or strongly agreed they would feel confident using the system in either the senior center or the home. Thirteen participants felt confident they could actually set up the system in their home. The mean System Usability Scale (SUS) score was 65.5 ± 21.2 with a range of 32.5 to 97.5. Ten participants scored ST as an above average usability experience compared to other technologies and 5 participants scored a less than optimal experience. Exploratory analysis revealed no significant relationships between user experience, education background, self-described computer experience, and fall risk. Conclusions Results support the virtual delivery of the OEP by a Kinect camera and an avatar may be acceptable to older adults from a variety of backgrounds. Virtual technologies, like Stand Tall, could offer an efficient and effective approach to bring evidence-based fall prevention programs to scale to address the problem of falls and fall-related injuries. Next steps include determining if similar or better outcomes are achieved by older adults using the virtual OEP, Stand Tall, compared to the standard of care. PMID:28582244

High Altitude Venus Operations Concept Trajectory Design, Modeling and Simulation

NASA Technical Reports Server (NTRS)

Lugo, Rafael A.; Ozoroski, Thomas A.; Van Norman, John W.; Arney, Dale C.; Dec, John A.; Jones, Christopher A.; Zumwalt, Carlie H.

2015-01-01

A trajectory design and analysis that describes aerocapture, entry, descent, and inflation of manned and unmanned High Altitude Venus Operation Concept (HAVOC) lighter-than-air missions is presented. Mission motivation, concept of operations, and notional entry vehicle designs are presented. The initial trajectory design space is analyzed and discussed before investigating specific trajectories that are deemed representative of a feasible Venus mission. Under the project assumptions, while the high-mass crewed mission will require further research into aerodynamic decelerator technology, it was determined that the unmanned robotic mission is feasible using current technology.

Reduced cost alternatives to premise wiring using ATM and microcellular technologies

NASA Technical Reports Server (NTRS)

Gejji, Raghvendra R.

1993-01-01

The cost of premises wiring keeps increasing due to personnel moves, new equipment, capacity upgrades etc. It would be desirable to have a wireless interface from the workstations to the fixed network, so as to minimize the wiring changes needed. New technologies such as microcellular personal communication systems are promising to bring down the cost of wireless communication. Another promising technology is Code Division Multiple Access (CDMA), which could dramatically increase the bandwidth available for wireless connections. In addition, Asynchronous Transfer Mode (ATM) technology is emerging as a technique for integrated management of voice, data, and video traffic on a single network. The focus of this investigation will be to assess the future utility of these new technologies for reducing the premise wiring cost at KSC. One of the issues to be studied is the cost comparison of 'old' versus 'new,' especially as time and technology progress. An additional issue for closer study is a feasible time-line for progress in technological capability.

Development of Rice Reprocessing to Strengthen Small Scale Rice Mills in Indramayu West Java

NASA Astrophysics Data System (ADS)

Firdaus, Y. R.; Hasbullah, R.; Djohar, S.

2018-05-01

Small Rice Mill (SRM) has a very important role in rice production of strong institutional relationships to farmers and rice markets. Nevertheless, the rice produced in low quality and changing consumer preferences cause SRM to have difficulty in maintaining the role. Development of a reprocessing business - called Rice to Rice Processing Plant (R2RP) - as a separate business unit will support their role and existence. This study aimed at analyzing the feasibility of R2RP business that integrates SRM and market as an independent business unit and determines mutual partnership pattern. The study was conducted with special reference to West Java Province. The qualitative method used for non-financial aspects analysis includes raw material, market, technical-technological, management and regulation and partnership pattern. The financial aspect used the quantitative method of Net Present Value (NPV), Net Benefit Cost Ratio (Net B/C), Internal Rate of Return (IRR), Payback Period (PP) and Switching Value to check their sensitivity.The results showed R2R business is feasible for non-financially, technical-technological and financial aspects. Technology has evolved to produce various qualities (premium or medium) after the quality of raw materials (low quality or off-grade rice) using profit optimization. Value of the financial parameters was NPV of Rp 137 billion, Net B/C of 5.80, IRR of 84.27 percent and PP of 2.18 years at capacity of 19,800 tons/year with total investment of Rp 30 billion (Rp 13,500/USD). The switching value analysis showed that a decrease in product prices is sensitively influencing the financial feasibility. To strengthen cooperation that enhancing mutually beneficial relationship, R2R assists equipment investment in and buy raw material from SRM at a rational agreed price.

Protocol for a feasibility randomised controlled trial of the use of Physical ACtivity monitors in an Exercise Referral Setting: the PACERS study.

PubMed

Hawkins, Jemma; Edwards, Michelle; Charles, Joanna; Jago, Russell; Kelson, Mark; Morgan, Kelly; Murphy, Simon; Oliver, Emily; Simpson, Sharon; Edwards, Rhiannon Tudor; Moore, Graham

2017-01-01

Exercise referral schemes are recommended by the National Institute for Clinical Excellence (NICE) for physical activity promotion among inactive patients with health conditions or risk factors. Whilst there is evidence for the initial effectiveness and cost-effectiveness of such schemes for increasing physical activity, evidence of long-term effects is limited. Techniques such as goal setting, self-monitoring and personalised feedback may support motivation for physical activity. Technologies such as activity monitoring devices provide an opportunity to enhance delivery of motivational techniques. This paper describes the PACERS study protocol, which aims to assess the feasibility and acceptability of implementing an activity monitor within the existing Welsh National Exercise Referral Scheme (NERS) and proposed evaluation methodology for a full-scale randomised controlled trial. The PACERS study consists of a pilot randomised controlled trial, process evaluation and exploratory economic analyses. Participants will be recruited from the generic pathway of the Welsh NERS and will be randomly assigned to receive the intervention or usual practice. Usual practice is a 16-week structured exercise programme; the intervention consists of an accelerometry-based activity monitor (MyWellnessKey) and an associated web platform (MyWellnessCloud). The primary outcomes are predefined progression criteria assessing the acceptability and feasibility of the intervention and feasibility of the proposed evaluation methodology. Postal questionnaires will be completed at baseline (time 0: T0), 16 weeks after T0 (T1) and 12 months after T0 (T2). Routinely collected data will also be accessed at the same time points. A sub-sample of intervention participants and exercise referral staff will be interviewed following initiation of intervention delivery and at the end of the study. The PACERS study seeks to assess the feasibility of adding a novel motivational component to an existing effective intervention in order to enhance effects on physical activity and support longer-term maintenance. The study will provide insight into the acceptability of activity-monitoring technologies to an exercise referral population and delivery staff. Data from this study will be used to determine whether and how to proceed to a full-scale trial of effectiveness of the intervention, including any necessary refinements to intervention implementation or the proposed evaluation methodology. ISRCTN85785652.

Reactions to a remote-controlled video-communication robot in seniors' homes: a pilot study of feasibility and acceptance.

PubMed

Seelye, Adriana M; Wild, Katherine V; Larimer, Nicole; Maxwell, Shoshana; Kearns, Peter; Kaye, Jeffrey A

2012-12-01

Remote telepresence provided by tele-operated robotics represents a new means for obtaining important health information, improving older adults' social and daily functioning and providing peace of mind to family members and caregivers who live remotely. In this study we tested the feasibility of use and acceptance of a remotely controlled robot with video-communication capability in independently living, cognitively intact older adults. A mobile remotely controlled robot with video-communication ability was placed in the homes of eight seniors. The attitudes and preferences of these volunteers and those of family or friends who communicated with them remotely via the device were assessed through survey instruments. Overall experiences were consistently positive, with the exception of one user who subsequently progressed to a diagnosis of mild cognitive impairment. Responses from our participants indicated that in general they appreciated the potential of this technology to enhance their physical health and well-being, social connectedness, and ability to live independently at home. Remote users, who were friends or adult children of the participants, were more likely to test the mobility features and had several suggestions for additional useful applications. Results from the present study showed that a small sample of independently living, cognitively intact older adults and their remote collaterals responded positively to a remote controlled robot with video-communication capabilities. Research is needed to further explore the feasibility and acceptance of this type of technology with a variety of patients and their care contacts.

Evaluation of Flight Deck-Based Interval Management Crew Procedure Feasibility

NASA Technical Reports Server (NTRS)

Wilson, Sara R.; Murdoch, Jennifer L.; Hubbs, Clay E.; Swieringa, Kurt A.

2013-01-01

Air traffic demand is predicted to increase over the next 20 years, creating a need for new technologies and procedures to support this growth in a safe and efficient manner. The National Aeronautics and Space Administration's (NASA) Air Traffic Management Technology Demonstration - 1 (ATD-1) will operationally demonstrate the feasibility of efficient arrival operations combining ground-based and airborne NASA technologies. The integration of these technologies will increase throughput, reduce delay, conserve fuel, and minimize environmental impacts. The ground-based tools include Traffic Management Advisor with Terminal Metering for precise time-based scheduling and Controller Managed Spacing decision support tools for better managing aircraft delay with speed control. The core airborne technology in ATD-1 is Flight deck-based Interval Management (FIM). FIM tools provide pilots with speed commands calculated using information from Automatic Dependent Surveillance - Broadcast. The precise merging and spacing enabled by FIM avionics and flight crew procedures will reduce excess spacing buffers and result in higher terminal throughput. This paper describes a human-in-the-loop experiment designed to assess the acceptability and feasibility of the ATD-1 procedures used in a voice communications environment. This experiment utilized the ATD-1 integrated system of ground-based and airborne technologies. Pilot participants flew a high-fidelity fixed base simulator equipped with an airborne spacing algorithm and a FIM crew interface. Experiment scenarios involved multiple air traffic flows into the Dallas-Fort Worth Terminal Radar Control airspace. Results indicate that the proposed procedures were feasible for use by flight crews in a voice communications environment. The delivery accuracy at the achieve-by point was within +/- five seconds and the delivery precision was less than five seconds. Furthermore, FIM speed commands occurred at a rate of less than one per minute, and pilots found the frequency of the speed commands to be acceptable at all times throughout the experiment scenarios.

Setting Emissions Standards Based on Technology Performance

EPA Pesticide Factsheets

In setting national emissions standards, EPA sets emissions performance levels rather than mandating use of a particular technology. The law mandates that EPA use numerical performance standards whenever feasible in setting national emissions standards.

Factors Affecting Training Effectiveness in Synchronous, Dispersed Virtual Environments

DTIC Science & Technology

2014-06-01

technology to its technical training programs. Specifically, a distance learning model with instruction provided through 3-D virtual worlds could...ABSTRACT The U.S. Navy is investigating the feasibility of incorporating distance learning technology to its technical training programs. Specifically...15 A. TECHNOLOGY ACCEPTANCE MODEL

The Application of Technology to Education.

ERIC Educational Resources Information Center

1969

A symposium was sponsored by the American Society for Engineering Education; experts in the fields of technology, economics, and pedagogy gathered to evaluate the potential technological advances in terms of cost-effectiveness and feasibility within the existing educational framework, and to help delineate the ways in which educational…

Ballistic missile defense technologies

NASA Astrophysics Data System (ADS)

1985-09-01

A report on Ballistic Missile Technologies includes the following: Executive summary; Introduction; Ballistic missiles then and now; Deterrence, U.S. nuclear strategy, and BMD; BMD capabilities and the strategic balance; Crisis stability, arms race stability, and arms control issues; Ballistic missile defense technologies; Feasibility; Alternative future scenarios; Alternative R&D programs.

Feasibility studies of Bragg probe for noninvasive carotid pulse waveform assessment

NASA Astrophysics Data System (ADS)

Leitão, Cátia; Bilro, Lúcia; Alberto, Nélia; Antunes, Paulo; Lima, Hugo; André, Paulo S.; Nogueira, Rogério; Pinto, João L.

2013-01-01

The arterial stiffness evaluation is largely reported as an independent predictor of cardiovascular diseases. The central pulse waveform can provide important data about arterial health and has been studied in patients with several pathologies, such as diabetes mellitus, coronary artery disease and hypertension. The implementation and feasibility studies of a fiber Bragg grating probe for noninvasive monitoring of the carotid pulse are described based on fiber Bragg grating technology. Assessment tests were carried out in carotids of different volunteers and it was possible to detect the carotid pulse waveform in all subjects. In one of the subjects, the sensor was also tested in terms of repeatability. Although further tests will be required for clinical investigation, the first studies suggest that the developed sensor can be a valid alternative to electromechanical tonometers.

Enhancing mHealth Technology in the Patient-Centered Medical Home Environment to Activate Patients With Type 2 Diabetes: A Multisite Feasibility Study Protocol

PubMed Central

Shi, Lu; Williams, Joel E; Dye, Cheryl J; Chen, Liwei; Crawford, Paul; Shry, Eric A; Griffin, Sarah F; Jones, Karyn O; Sherrill, Windsor W; Truong, Khoa; Little, Jeanette R; Edwards, Karen W; Hing, Marie; Moss, Jennie B

2017-01-01

Background The potential of mHealth technologies in the care of patients with diabetes and other chronic conditions has captured the attention of clinicians and researchers. Efforts to date have incorporated a variety of tools and techniques, including Web-based portals, short message service (SMS) text messaging, remote collection of biometric data, electronic coaching, electronic-based health education, secure email communication between visits, and electronic collection of lifestyle and quality-of-life surveys. Each of these tools, used alone or in combination, have demonstrated varying degrees of effectiveness. Some of the more promising results have been demonstrated using regular collection of biometric devices, SMS text messaging, secure email communication with clinical teams, and regular reporting of quality-of-life variables. In this study, we seek to incorporate several of the most promising mHealth capabilities in a patient-centered medical home (PCMH) workflow. Objective We aim to address underlying technology needs and gaps related to the use of mHealth technology and the activation of patients living with type 2 diabetes. Stated differently, we enable supporting technologies while seeking to influence patient activation and self-care activities. Methods This is a multisite phased study, conducted within the US Military Health System, that includes a user-centered design phase and a PCMH-based feasibility trial. In phase 1, we will assess both patient and provider preferences regarding the enhancement of the enabling technology capabilities for type 2 diabetes chronic care management. Phase 2 research will be a single-blinded 12-month feasibility study that incorporates randomization principles. Phase 2 research will seek to improve patient activation and self-care activities through the use of the Mobile Health Care Environment with tailored behavioral messaging. The primary outcome measure is the Patient Activation Measure scores. Secondary outcome measures are Summary of Diabetes Self-care Activities Measure scores, clinical measures, comorbid conditions, health services resource consumption, and technology system usage statistics. Results We have completed phase 1 data collection. Formal analysis of phase 1 data has not been completed. We have obtained institutional review board approval and began phase 1 research in late fall 2016. Conclusions The study hypotheses suggest that patients can, and will, improve their activation in chronic care management. Improved activation should translate into improved diabetes self-care. Expected benefits of this research to the scientific community and health care services include improved understanding of how to leverage mHealth technology to activate patients living with type 2 diabetes in self-management behaviors. The research will shed light on implementation strategies in integrating mHealth into the clinical workflow of the PCMH setting. Trial Registration ClinicalTrials.gov NCT02949037. https://clinicaltrials.gov/ct2/show/NCT02949037. (Archived by WebCite at http://www.webcitation.org/6oRyDzqei) PMID:28264792

JPRS Report, Science & Technology, Europe & Latin America.

DTIC Science & Technology

1988-01-21

this way we can analyze the elements that control the 27 cell-specific and temporal expression of genes, and study the effects of genie expression... effects of new genetic diversity that a scientific basis will be created for the establishment of efficient regulation. 5) Feasibility studies for...which I am involved inatituted a multi- centric study to evaluate the real clinical applicability and diagnostic effectiveness of associating

Feasibility study of tank leakage mitigation using subsurface barriers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Treat, R.L.; Peters, B.B.; Cameron, R.J.

1994-09-21

The US Department of Energy (DOE) has established the Tank Waste Remediation System (TWRS) to satisfy manage and dispose of the waste currently stored in the underground storage tanks. The retrieval element of TWRS includes a work scope to develop subsurface impermeable barriers beneath SSTs. The barriers could serve as a means to contain leakage that may result from waste retrieval operations and could also support site closure activities by facilitating cleanup. Three types of subsurface barrier systems have emerged for further consideration: (1) chemical grout, (2) freeze walls, and (3) desiccant, represented in this feasibility study as a circulatingmore » air barrier. This report contains analyses of the costs and relative risks associated with combinations retrieval technologies and barrier technologies that from 14 alternatives. Eight of the alternatives include the use of subsurface barriers; the remaining six nonbarrier alternative are included in order to compare the costs, relative risks and other values of retrieval with subsurface barriers. Each alternative includes various combinations of technologies that can impact the risks associated with future contamination of the groundwater beneath the Hanford Site to varying degrees. Other potential risks associated with these alternatives, such as those related to accidents and airborne contamination resulting from retrieval and barrier emplacement operations, are not quantitatively evaluated in this report.« less

Formed platelet combustor liner construction feasibility, phase A

NASA Technical Reports Server (NTRS)

Hayes, W. A.; Janke, D. E.

1992-01-01

Environments generated in high pressure liquid rocket engines impose severe requirements on regeneratively cooled combustor liners. Liners fabricated for use in high chamber pressures using conventional processes suffer from limitations that can impair operational cycle life and can adversely affect wall compatibility. Chamber liners fabricated using formed platelet technology provide an alternative to conventional regeneratively cooled liners (an alternative that has many attractive benefits). A formed platelet liner is made from a stacked assembly of platelets with channel features. The assembly is diffusion bonded into a flat panel and then three-dimensionally formed into a section of a chamber. Platelet technology permits the liner to have very precisely controlled and thin hot gas walls and therefore increased heat transfer efficiency. Further cooling efficiencies can be obtained through enhanced design flexibility. These advantages translate into increased cycle life and enhanced wall compatibility. The increased heat transfer efficiency can alternately be used to increase engine performance or turbopump life as a result of pressure drop reductions within the regeneratively cooled liner. Other benefits can be obtained by varying the materials of construction within the platelet liner to enhance material compatibility with operating environment or with adjoining components. Manufacturing cost savings are an additional benefit of a formed platelet liner. This is because of reduced touch labor and reduced schedule when compared to conventional methods of manufacture. The formed platelet technology is not only compatible with current state-of-the art combustion chamber structural support and manifolding schemes, it is also an enabling technology that allows the use of other high performance and potentially low cost methods of construction for the entire combustion chamber assembly. The contract under which this report is submitted contains three phases: (1) phase A - feasibility study and technology development; (2) phase B - sub-scale fabrication feasibility; and (3) phase C - large scale fabrication validation. This report covers the Phase A activities, which began in December of 1988.

Enhancing Care of Aged and Dying Prisoners: Is e-Learning a Feasible Approach?

PubMed

Loeb, Susan J; Penrod, Janice; Myers, Valerie H; Baney, Brenda L; Strickfaden, Sophia M; Kitt-Lewis, Erin; Wion, Rachel K

Prisons and jails are facing sharply increased demands in caring for aged and dying inmates. Our Toolkit for Enhancing End-of-life Care in Prisons effectively addressed end-of-life (EOL) care; however, geriatric content was limited, and the product was not formatted for broad dissemination. Prior research adapted best practices in EOL care and aging; but, delivery methods lacked emerging technology-focused learning and interactivity. Our purposes were to uncover current training approaches and preferences and to ascertain the technological capacity of correctional settings to deliver computer-based and other e-learning training. An environmental scan was conducted with 11 participants from U.S. prisons and jails to ensure proper fit, in terms of content and technology capacity, between an envisioned computer-based training product and correctional settings. Environmental scan findings focused on content of training, desirable qualities of training, prominence of "homegrown" products, and feasibility of commercial e-learning. This study identified qualities of training programs to adopt and pitfalls to avoid and revealed technology-related issues to be mindful of when designing computer-based training for correctional settings, and participants spontaneously expressed an interest in geriatrics and EOL training using this learning modality as long as training allowed for tailoring of materials.

Video capture on student-owned mobile devices to facilitate psychomotor skills acquisition: A feasibility study.

PubMed

Hinck, Glori; Bergmann, Thomas F

2013-01-01

Objective : We evaluated the feasibility of using mobile device technology to allow students to record their own psychomotor skills so that these recordings can be used for self-reflection and formative evaluation. Methods : Students were given the choice of using DVD recorders, zip drive video capture equipment, or their personal mobile phone, device, or digital camera to record specific psychomotor skills. During the last week of the term, they were asked to complete a 9-question survey regarding their recording experience, including details of mobile phone ownership, technology preferences, technical difficulties, and satisfaction with the recording experience and video critique process. Results : Of those completing the survey, 83% currently owned a mobile phone with video capability. Of the mobile phone owners 62% reported having email capability on their phone and that they could transfer their video recording successfully to their computer, making it available for upload to the learning management system. Viewing the video recording of the psychomotor skill was valuable to 88% of respondents. Conclusions : Our results suggest that mobile phones are a viable technology to use for the video capture and critique of psychomotor skills, as most students own this technology and their satisfaction with this method is high.

A Technology-Mediated Approach to the Implementation of an Evidence-Based Child Maltreatment Prevention Program.

PubMed

Self-Brown, Shannon R; C Osborne, Melissa; Rostad, Whitney; Feil, Ed

2017-11-01

Implementation of evidence-based parenting programs is critical for parents at-risk for child maltreatment perpetration; however, widespread use of effective programs is limited in both child welfare and prevention settings. This exploratory study sought to examine whether a technology-mediated approach to SafeCare ® delivery can feasibly assist newly trained providers in achieving successful implementation outcomes. Thirty-one providers working in child welfare or high-risk prevention settings were randomized to either SafeCare Implementation with Technology-Assistance (SC-TA) or SafeCare Implementation as Usual (SC-IU). SC-TA providers used a web-based program during session that provided video-based psychoeducation and modeling directly to parents and overall session guidance to providers. Implementation outcome data were collected from providers for six months. Data strongly supported the feasibility of SC-TA. Further, data indicated that SC-TA providers spent significantly less time on several activities in preparation, during, and in follow-up to SafeCare sessions compared to SC-IU providers. No differences were found between the groups with regard to SafeCare fidelity and certification status. Findings suggest that technology can augment implementation by reducing the time and training burden associated with implementing new evidence-based practices for at-risk families.

Video capture on student-owned mobile devices to facilitate psychomotor skills acquisition: A feasibility study

PubMed Central

Hinck, Glori; Bergmann, Thomas F.

2013-01-01

Objective We evaluated the feasibility of using mobile device technology to allow students to record their own psychomotor skills so that these recordings can be used for self-reflection and formative evaluation. Methods Students were given the choice of using DVD recorders, zip drive video capture equipment, or their personal mobile phone, device, or digital camera to record specific psychomotor skills. During the last week of the term, they were asked to complete a 9-question survey regarding their recording experience, including details of mobile phone ownership, technology preferences, technical difficulties, and satisfaction with the recording experience and video critique process. Results Of those completing the survey, 83% currently owned a mobile phone with video capability. Of the mobile phone owners 62% reported having email capability on their phone and that they could transfer their video recording successfully to their computer, making it available for upload to the learning management system. Viewing the video recording of the psychomotor skill was valuable to 88% of respondents. Conclusions Our results suggest that mobile phones are a viable technology to use for the video capture and critique of psychomotor skills, as most students own this technology and their satisfaction with this method is high. PMID:23957324

Designing, Implementing, and Evaluating Mobile Health Technologies for Managing Chronic Conditions in Older Adults: A Scoping Review

PubMed Central

Harris, Lauren; Ploeg, Jenny; Markle-Reid, Maureen; Valaitis, Ruta; Ibrahim, Sarah; Gafni, Amiram; Isaacs, Sandra

2016-01-01

Background The current landscape of a rapidly aging population accompanied by multiple chronic conditions presents numerous challenges to optimally support the complex needs of this group. Mobile health (mHealth) technologies have shown promise in supporting older persons to manage chronic conditions; however, there remains a dearth of evidence-informed guidance to develop such innovations. Objectives The purpose of this study was to conduct a scoping review of current practices and recommendations for designing, implementing, and evaluating mHealth technologies to support the management of chronic conditions in community-dwelling older adults. Methods A 5-stage scoping review methodology was used to map the relevant literature published between January 2005 and March 2015 as follows: (1) identified the research question, (2) identified relevant studies, (3) selected relevant studies for review, (4) charted data from selected literature, and (5) summarized and reported results. Electronic searches were conducted in 5 databases. In addition, hand searches of reference lists and a key journal were completed. Inclusion criteria were research and nonresearch papers focused on mHealth technologies designed for use by community-living older adults with at least one chronic condition, or health care providers or informal caregivers providing care in the home and community setting. Two reviewers independently identified articles for review and extracted data. Results We identified 42 articles that met the inclusion criteria. Of these, described innovations focused on older adults with specific chronic conditions (n=17), chronic conditions in general (n=6), or older adults in general or those receiving homecare services (n=18). Most of the mHealth solutions described were designed for use by both patients and health care providers or health care providers only. Thematic categories identified included the following: (1) practices and considerations when designing mHealth technologies; (2) factors that support/hinder feasibility, acceptability, and usability of mHealth technologies; and (3) approaches or methods for evaluating mHealth technologies. Conclusions There is limited yet increasing use of mHealth technologies in home health care for older adults. A user-centered, collaborative, interdisciplinary approach to enhance feasibility, acceptability, and usability of mHealth innovations is imperative. Creating teams with the required pools of expertise and insight regarding needs is critical. The cyclical, iterative process of developing mHealth innovations needs to be viewed as a whole with supportive theoretical frameworks. Many barriers to implementation and sustainability have limited the number of successful, evidence-based mHealth solutions beyond the pilot or feasibility stage. The science of implementation of mHealth technologies in home-based care for older adults and self-management of chronic conditions are important areas for further research. Additionally, changing needs as cohorts and technologies advance are important considerations. Lessons learned from the data and important implications for practice, policy, and research are discussed to inform the future development of innovations. PMID:27282195

A New England Land-Grant Network; A Study of the Feasibility of Establishing Educational Information Links Between the Six Land-Grant Universities in New England.

ERIC Educational Resources Information Center

Bardwell, John D.

This study sought to identify physical facilities needed to connect the six New England land-grant universities. Criteria were time (use of current technology), cost (regular operating budgets of participating institutions), minimal personnel requirements, flexibility, and compatibility. The telephone system, an existing microwave network, a…

Study of the application of hydrogen fuel to long-range subsonic transport aircraft, volume 2

NASA Technical Reports Server (NTRS)

Brewer, G. D.; Morris, R. E.; Lange, R. H.; Moore, J. W.

1975-01-01

The feasibility, practicability, and potential advantages/disadvantages of using liquid hydrogen as fuel in long range, subsonic transport aircraft of advanced design were studied. Both passenger and cargo-type aircraft were investigated. To provide a valid basis for comparison, conventional hydrocarbon (Jet A) fueled aircraft were designed to perform identical missions using the same advanced technology and meeting the same operational constraints. The liquid hydrogen and Jet A fueled aircraft were compared on the basis of weight, size, energy utilization, cost, noise, emissions, safety, and operational characteristics. A program of technology development was formulated.

Design feasibility of an advanced technology supersonic cruise aircraft

NASA Technical Reports Server (NTRS)

Rowe, W. T.

1976-01-01

Research and development programs provide confidence that technology is in-hand to design an economically attractive, environmentally sound supersonic cruise aircraft for commercial operations. The principal results of studies and tests are described including those which define the selection of significant design features. These typically include the results of: (1) wind-tunnel tests, both subsonic and supersonic, (2) propulsion performance and acoustic tests on noise suppressors, including forward-flight effects, (3) studies of engine/airframe integration, which lead to the selection of engine cycles/sizes to meet future market, economic, and social requirements; and (4) structural testing.

Advanced flight computer. Special study

NASA Technical Reports Server (NTRS)

Coo, Dennis

1995-01-01

This report documents a special study to define a 32-bit radiation hardened, SEU tolerant flight computer architecture, and to investigate current or near-term technologies and development efforts that contribute to the Advanced Flight Computer (AFC) design and development. An AFC processing node architecture is defined. Each node may consist of a multi-chip processor as needed. The modular, building block approach uses VLSI technology and packaging methods that demonstrate a feasible AFC module in 1998 that meets that AFC goals. The defined architecture and approach demonstrate a clear low-risk, low-cost path to the 1998 production goal, with intermediate prototypes in 1996.

A pilot study of delivering peer health messages in an HIV clinic via mobile media.

PubMed

Winstead-Derlega, Christopher; Rafaly, Mary; Delgado, Sarah; Freeman, Jason; Cutitta, Katherine; Miles, Tony; Ingersoll, Karen; Dillingham, Rebecca

2012-01-01

This pilot study tested the feasibility and impact of using mobile media devices to present peer health messages to human immunodeficiency virus (HIV)-positive patients. A convenience sample of 30 adult patients from an outpatient HIV clinic serving a mostly rural catchment area in central Virginia volunteered for the study. Participants viewed short videos of people discussing HIV health topics on an Apple (Cupertino, CA) iPod® touch® mobile device. Pre- and post-intervention surveys assessed attitudes related to engagement in care and disease disclosure. Participants found delivery of health information by the mobile device acceptable in a clinic setting. They used the technology without difficulty. Participants reported satisfaction with and future interest in viewing such videos after using the mobile devices. The majority of participants used the device to access more videos than requested, and many reported the videos "hit home." There were no significant changes in participant perceptions about engagement in care or HIV disclosure after the intervention. This pilot study demonstrates the feasibility and acceptability of using mobile media technology to deliver peer health messages. Future research should explore how to best use mobile media to improve engagement in care and reduce perceptions of stigma.

Preliminary analytical study on the feasibility of using reinforced concrete pile foundations for renewable energy storage by compressed air energy storage technology

NASA Astrophysics Data System (ADS)

Tulebekova, S.; Saliyev, D.; Zhang, D.; Kim, J. R.; Karabay, A.; Turlybek, A.; Kazybayeva, L.

2017-11-01

Compressed air energy storage technology is one of the promising methods that have high reliability, economic feasibility and low environmental impact. Current applications of the technology are mainly limited to energy storage for power plants using large scale underground caverns. This paper explores the possibility of making use of reinforced concrete pile foundations to store renewable energy generated from solar panels or windmills attached to building structures. The energy will be stored inside the pile foundation with hollow sections via compressed air. Given the relatively small volume of storage provided by the foundation, the required storage pressure is expected to be higher than that in the large-scale underground cavern. The high air pressure typically associated with large temperature increase, combined with structural loads, will make the pile foundation in a complicated loading condition, which might cause issues in the structural and geotechnical safety. This paper presents a preliminary analytical study on the performance of the pile foundation subjected to high pressure, large temperature increase and structural loads. Finite element analyses on pile foundation models, which are built from selected prototype structures, have been conducted. The analytical study identifies maximum stresses in the concrete of the pile foundation under combined pressure, temperature change and structural loads. Recommendations have been made for the use of reinforced concrete pile foundations for renewable energy storage.

Conformal Membrane Reflectors for Deployable Optics

NASA Technical Reports Server (NTRS)

Hood, Patrick J.; Keys, Andrew S. (Technical Monitor)

2002-01-01

This presentation reports the Phase I results on NASA's Gossamer Spacecraft Exploratory Research and Technology Program. Cornerstone Research Group, Inc., the University of Rochester, and International Photonics Consultants collaborated to investigate the feasibility of free-standing, liquid-crystal-polymer (LCP) reflectors for integration into space-based optical systems. The goal of the program was to achieve large-diameter, broadband. reflective membranes that are resistant to the effects of space, specifically cryogenic environments and gamma-ray irradiation. Additionally, we assessed the applicability of utilizing the technology as tight sails, since, by their very nature, these films offer high-reflectivity at specified wavelengths. Previous research programs have demonstrated all-polymer, narrow-band Specular reflectors and diffuse membrane reflectors. The feasibility of fabricating an all-polymer broadband specular reflector and a narrow-band specular membrane reflector was assessed in the Phase I Gossamer program. In addition, preliminary gamma irradiation studies were conducted to determine the stability of the polymer reflectors to radiation. Materials and process technology were developed to fabricate coupon-scale reflectors of both broad- and narrow-band specular reflectors in Phase 1. This presentation will report the results of these studies, including, the performance of a narrow-band specular membrane. Gamma irradiation exposures indicate limited impact on the optical performance although additional exposure studies are warranted. Plans to scale up the membrane fabrication process will be presented.

Feasibility of a 30-meter space based laser transmitter

NASA Technical Reports Server (NTRS)

Berggren, R. R.; Lenertz, G. E.

1975-01-01

A study was made of the application of large expandable mirror structures in future space missions to establish the feasibility and define the potential of high power laser systems for such applications as propulsion and power transmission. Application of these concepts requires a 30-meter diameter, diffraction limited mirror for transmission of the laser energy. Three concepts for the transmitter are presented. These concepts include consideration of continuous as well as segmented mirror surfaces and the major stow-deployment categories of inflatable, variable geometry and assembled-in-space structures. The mirror surface for each concept would be actively monitored and controlled to maintain diffraction limited performance at 10.6 microns during operation. The proposed mirror configurations are based on existing aerospace state-of-the-art technology. The assembled-in-space concept appears to be the most feasible, at this time.

Investigating the feasibility of establishing a virtual container yard to optimize empty container movement in the NY-NJ region

DOT National Transportation Integrated Search

2007-09-01

A Virtual Container Yard (VCY) is a mean of developing a shared resource information system to match empty equipment needs through the adoption of next generation internet and new technology information platforms. The project examines the feasibility...

Increasing Meaningful Assistive Technology Use in the Classrooms

ERIC Educational Resources Information Center

Connor, Cynthia; Beard, Lawrence A.

2015-01-01

Although personal technology is consistently used by students and teachers, meaningful use of technology for instruction may not be feasible without providing teachers specific training and support. One university is providing workshops, feedback through coursework, and hands-on training to teacher candidates and local area teachers. In addition,…

10 CFR 609.6 - Submission of Applications.

Code of Federal Regulations, 2010 CFR

2010-01-01

... TECHNOLOGIES § 609.6 Submission of Applications. (a) In response to a solicitation or written invitation to...) Identification and commercial feasibility of the new or significantly improved technology(ies) to be employed in the project; (iv) How the Applicant intends to employ such technology(ies) in the project; and (v) How...

30 CFR 285.429 - What criteria will MMS consider in deciding whether to renew a lease or grant?

Code of Federal Regulations, 2011 CFR

2011-07-01

... existing technology. (b) Availability and feasibility of new technology. (c) Environmental and safety... generation capacity and reliability within the regional electrical distribution and transmission system. ...

Energy from wood waste - A case study

NASA Technical Reports Server (NTRS)

Scola, R.; Daughtrey, K.

1980-01-01

A joint study has been conducted by NASA and Army installations collocated in a dense forest in southwestern Mississippi in order to determine the technical and economic feasibility of using wood waste as a renewable energy source. The study has shown that, with proper forest management, the timber on government lands could eventually support the total energy requirements of 832 billion Btu/yr. Analysis of the current conversion technologies indicates that the direct combustion spreader stoker approach is the best demonstrated technology for this specific application. The economics of the individual powerplants reveal them as attractive alternatives to fossil fueled plants. Environmental aspects are also discussed.

Application and Removal of Strippable Coatings via Remote Platform - 13133

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shoffner, P.; Lagos, L.; Maggio, S.

2013-07-01

Florida International University's (FIU's) Applied Research Center is currently supporting the Department of Energy (DOE) Environmental Management Office of D and D and Facility Engineering program. FIU is supporting DOE's initiative to improve safety, reduce technical risks, and limit uncertainty within D and D operations by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting feasibility studies and technology demonstrations of selected technologies and working with technology vendors to optimize the design of their current technologies to accomplish dangerous and demanding tasks during D and D operations.more » To meet one identified technology gap challenge for a technology to remotely apply strippable coatings, fixatives and decontamination gels, FIU identified and performed an initial demonstration of an innovative remote fixative sprayer platform from International Climbing Machines (ICM). The selected technology was demonstrated spraying fixative products at the hot cell mockup facility at the Applied Research Center at FIU in November 2008 under cold (non-radioactive) conditions. The remotely controlled platform was remotely operated and entered the facility and sprayed a fixative onto horizontal and vertical surfaces. Based on the initial FIU demonstration and the specific technical requirements identified at the DOE facilities, a follow-up demonstration was expanded to include strippable coatings and a decontamination gel, which was demonstrated in June 2010 at the ICM facility in Ithaca, NY. This second technology evaluation documented the ability of the remote system to spray the selected products on vertical stainless steel and concrete surfaces to a height of 3 meters (10 feet) and to achieve sufficient coverage and product thickness to promote the ability to peel/remove the strippable coatings and decontamination gel. The next challenge was to determine if a remote platform could be used to remove the strippable coatings and decontamination gels. In 2012, FIU worked with the technology provider, ICM, to conduct feasibility and trade studies to identify the requirements for the remote removal of strippable coatings or decontamination gels using the existing remote controlled platform. (authors)« less

Advanced Concepts: Enabling Future AF Missions Through the Discovery and Demonstration of Emerging Revolutionary Technologies

DTIC Science & Technology

2012-10-03

µmeteoroids, weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- Concept NTF NMS NCA Primary Challenges for Launch...weather, vibrations... Asteroid Mining Breakthrough Physics No known feasible concepts. --- 8 2.2 Microwave Augmentation of Solid Rocket Motors16,17 As...Astronautica, Vol. 52, 1, pp. 49-75, 30 May, 2002. 7. Sonter, M.J., “The Technical and Economic Feasibility of Mining the Near-Earth Asteroids ,” Acta

Technical guidance for the development of a solid state image sensor for human low vision image warping

NASA Technical Reports Server (NTRS)

Vanderspiegel, Jan

1994-01-01

This report surveys different technologies and approaches to realize sensors for image warping. The goal is to study the feasibility, technical aspects, and limitations of making an electronic camera with special geometries which implements certain transformations for image warping. This work was inspired by the research done by Dr. Juday at NASA Johnson Space Center on image warping. The study has looked into different solid-state technologies to fabricate image sensors. It is found that among the available technologies, CMOS is preferred over CCD technology. CMOS provides more flexibility to design different functions into the sensor, is more widely available, and is a lower cost solution. By using an architecture with row and column decoders one has the added flexibility of addressing the pixels at random, or read out only part of the image.

Feasibility of task-specific brain-machine interface training for upper-extremity paralysis in patients with chronic hemiparetic stroke.

PubMed

Nishimoto, Atsuko; Kawakami, Michiyuki; Fujiwara, Toshiyuki; Hiramoto, Miho; Honaga, Kaoru; Abe, Kaoru; Mizuno, Katsuhiro; Ushiba, Junichi; Liu, Meigen

2018-01-10

Brain-machine interface training was developed for upper-extremity rehabilitation for patients with severe hemiparesis. Its clinical application, however, has been limited because of its lack of feasibility in real-world rehabilitation settings. We developed a new compact task-specific brain-machine interface system that enables task-specific training, including reach-and-grasp tasks, and studied its clinical feasibility and effectiveness for upper-extremity motor paralysis in patients with stroke. Prospective beforeâ€"after study. Twenty-six patients with severe chronic hemiparetic stroke. Participants were trained with the brain-machine interface system to pick up and release pegs during 40-min sessions and 40 min of standard occupational therapy per day for 10 days. Fugl-Meyer upper-extremity motor (FMA) and Motor Activity Log-14 amount of use (MAL-AOU) scores were assessed before and after the intervention. To test its feasibility, 4 occupational therapists who operated the system for the first time assessed it with the Quebec User Evaluation of Satisfaction with assistive Technology (QUEST) 2.0. FMA and MAL-AOU scores improved significantly after brain-machine interface training, with the effect sizes being medium and large, respectively (p<0.01, d=0.55; p<0.01, d=0.88). QUEST effectiveness and safety scores showed feasibility and satisfaction in the clinical setting. Our newly developed compact brain-machine interface system is feasible for use in real-world clinical settings.

Social Network Supported Process Recommender System

PubMed Central

Ye, Yanming; Yin, Jianwei; Xu, Yueshen

2014-01-01

Process recommendation technologies have gained more and more attention in the field of intelligent business process modeling to assist the process modeling. However, most of the existing technologies only use the process structure analysis and do not take the social features of processes into account, while the process modeling is complex and comprehensive in most situations. This paper studies the feasibility of social network research technologies on process recommendation and builds a social network system of processes based on the features similarities. Then, three process matching degree measurements are presented and the system implementation is discussed subsequently. Finally, experimental evaluations and future works are introduced. PMID:24672309

Renewable Energy Opportunity Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hancock, Ed; Mas, Carl

1998-11-13

Presently, the US EPA is constructing a new complex at Research Triangle Park, North Carolina to consolidate its research operations in the Raleigh-Durham area. The National Computer Center (NCC) is currently in the design process and is planned for construction as part of this complex. Implementation of the new technologies can be planned as part of the normal construction process, and full credit for elimination of the conventional technologies can be taken. Several renewable technologies are specified in the current plans for the buildings. The objective of this study is to identify measures that are likely to be both technicallymore » and economically feasible.« less

Energy requirement for the production of silicon solar arrays

NASA Technical Reports Server (NTRS)

Lindmayer, J.; Wihl, M.; Scheinine, A.; Rosenfield, T.; Wrigley, C. Y.; Morrison, A.; Anderson, J.; Clifford, A.; Lafky, W.

1977-01-01

The results of a study to investigate the feasibility of manufacturing photovoltaic solar array modules by the use of energy obtained from similar or identical photovoltaic sources are presented. The primary objective of this investigation was the characterization of the energy requirements of current and developing technologies which comprise the photovoltaic field. For cross-checking the energies of prevailing technologies data were also used and the wide-range assessment of alternative technologies included different refinement methods, various ways of producing light sheets, semicrystalline cells, etc. Energy data are utilized to model the behavior of a future solar breeder plant under various operational conditions.

Novel Vertical Interconnects With 180 Degree Phase Shift for Amplifiers, Filters, and Integrated Antennas

NASA Technical Reports Server (NTRS)

Goverdhanam, Kavita; Simons, Rainee N.; Katehi, Linda P. B.; Burke, Thomas P. (Technical Monitor)

2001-01-01

In this paper, novel low loss, wide-band coplanar stripline technology for RF/microwave integrated circuits is demonstrated on high resistivity silicon wafer. In particular, the fabrication process for the deposition of spin-on-glass (SOG) as a dielectric layer, the etching of microvias for the vertical interconnects, the design methodology for the multiport circuits and their measured/simulated characteristics are graphically illustrated. The study shows that circuits with very low loss, large bandwidth and compact size are feasible using this technology. This multilayer planar technology has potential to significantly enhance RF/microwave IC performance when combined with semiconductor devices and microelectromechanical systems (MEMS).

Data storage systems technology for the Space Station era

NASA Technical Reports Server (NTRS)

Dalton, John; Mccaleb, Fred; Sos, John; Chesney, James; Howell, David

1987-01-01

The paper presents the results of an internal NASA study to determine if economically feasible data storage solutions are likely to be available to support the ground data transport segment of the Space Station mission. An internal NASA effort to prototype a portion of the required ground data processing system is outlined. It is concluded that the requirements for all ground data storage functions can be met with commercial disk and tape drives assuming conservative technology improvements and that, to meet Space Station data rates with commercial technology, the data will have to be distributed over multiple devices operating in parallel and in a sustained maximum throughput mode.

Instructional Technology and Media for Postsecondary Alternatives: Meeting California's Educational Needs. A Feasibility Study.

ERIC Educational Resources Information Center

Clark, Richard E.; Rubin, David P.

This report characterizes the resources that exist in the state of California which might be more fully utilized through legislation providing incentives for its development. Selected existing postsecondary education programs and selected information systems are reviewed to exemplify successful uses of instructional and informational media. An…

Financial and technical feasibility of dynamic congestion pricing as a revenue generation source in Indiana : exploiting the availability of real-time information and dynamic pricing technologies.

DOT National Transportation Integrated Search

2011-10-19

"Highway stakeholders continue to support research studies that address critical issues of the current era, including congestion mitigation and revenue generation. A mechanism that addresses both concerns is congestion pricing which establishes a dir...

Phased array-fed antenna configuration study: Technology assessment

NASA Technical Reports Server (NTRS)

Croswell, W. F.; Ball, D. E.; Taylor, R. C.

1983-01-01

Spacecraft array fed reflector antenna systems were assessed for particular application to a multiple fixed spot beam/multiple scanning spot beam system. Reflector optics systems are reviewed in addition to an investigation of the feasibility of the use of monolithic microwave integrated circuit power amplifiers and phase shifters in each element of the array feed.

Effect Of Inorganic, Synthetic And Naturally Occurring Chelating Agents On Fe(II) Mediated Advanced Oxidation Of Chlorophenols

EPA Science Inventory

This study examines the feasibility and application of Advanced Oxidation Technologies (AOTs) for the treatment of chlorophenols that are included in US EPA priority pollutant list. A novel class of sulfate/hydroxyl radical-based homogeneous AOTs (Fe(II)/PS, Fe(II)/PMS, Fe(II)/H...

Pilot Clinical Application of an Adaptive Robotic System for Young Children with Autism

ERIC Educational Resources Information Center

Bekele, Esubalew; Crittendon, Julie A.; Swanson, Amy; Sarkar, Nilanjan; Warren, Zachary E.

2014-01-01

It has been argued that clinical applications of advanced technology may hold promise for addressing impairments associated with autism spectrum disorders. This pilot feasibility study evaluated the application of a novel adaptive robot-mediated system capable of both administering and automatically adjusting joint attention prompts to a small…

Standards for K-12 Engineering Education?

ERIC Educational Resources Information Center

National Academies Press, 2010

2010-01-01

The goal of this study was to assess the value and feasibility of developing and implementing content standards for engineering education at the K-12 level. Content standards have been developed for three disciplines in STEM education--science, technology, and mathematic--but not for engineering. To date, a small but growing number of K-12…

NASA R and T aerospace plane vehicles: Progress and plans

NASA Technical Reports Server (NTRS)

Dixon, S. C.

1985-01-01

Progress made in key technologies such as materials, structures, aerothermodynamics, hypersonic aerodynamics, and hypersonic airbreathing propulsion are reported. Advances were made in more generic, areas such as active controls, flight computer hardware and software, and interdisciplinary analytical design methodology. These technology advances coupled with the development of and experiences with the Space Shuttle make feasible aerospace plane-type vehicles that meet the more demanding requirements of various DOD missions and/or an all-weather Shuttle II with reduced launch costs. Technology needs and high payoff technologies, and the technology advancements in propulsion, control-configured-vehicles, aerodynamics, aerothermodynamics, aerothermal loads, and materials and structures were studied. The highest payoff technologies of materials and structures including thermal-structural analysis and high temperature test techniques are emphasized. The high priority technology of propulsion, and plans, of what remains to be done rather than firm program commitments, are briefly discussed.

Activity Monitoring and Heart Rate Variability as Indicators of Fall Risk: Proof-of-Concept for Application of Wearable Sensors in the Acute Care Setting.

PubMed

Razjouyan, Javad; Grewal, Gurtej Singh; Rishel, Cindy; Parthasarathy, Sairam; Mohler, Jane; Najafi, Bijan

2017-07-01

Growing concern for falls in acute care settings could be addressed with objective evaluation of fall risk. The current proof-of-concept study evaluated the feasibility of using a chest-worn sensor during hospitalization to determine fall risk. Physical activity and heart rate variability (HRV) of 31 volunteers admitted to a 29-bed adult inpatient unit were recorded using a single chest-worn sensor. Sensor data during the first 24-hour recording were analyzed. Participants were stratified using the Hendrich II fall risk assessment into high and low fall risk groups. Univariate analysis revealed age, daytime activity, nighttime side lying posture, and HRV were significantly different between groups. Results suggest feasibility of wearable technology to consciously monitor physical activity, sleep postures, and HRV as potential markers of fall risk in the acute care setting. Further study is warranted to confirm the results and examine the efficacy of the proposed wearable technology to manage falls in hospitals. [Journal of Gerontological Nursing, 43(7), 53-62.]. Copyright 2017, SLACK Incorporated.

Conceptual study and key technology development for Mars Aeroflyby sample collection

NASA Astrophysics Data System (ADS)

Fujita, K.; Ozawa, T.; Okudaira, K.; Mikouchi, T.; Suzuki, T.; Takayanagi, H.; Tsuda, Y.; Ogawa, N.; Tachibana, S.; Satoh, T.

2014-01-01

Conceptual study of Mars Aeroflyby Sample Collection (MASC) is conducted as a part of the next Mars exploration mission currently entertained in Japan Aerospace Exploration Agency. In the mission scenario, an atmospheric entry vehicle is flown into the Martian atmosphere, collects the Martian dust particles as well as atmospheric gases during the guided hypersonic flight, exits the Martian atmosphere, and is inserted into a parking orbit from which a return system departs for the earth to deliver the dust and gas samples. In order to accomplish a controlled flight and a successful orbit insertion, aeroassist orbit transfer technologies are introduced into the guidance and control system. System analysis is conducted to assess the feasibility and to make a conceptual design, finding that the MASC system is feasible at the minimum system mass of 600 kg approximately. The aerogel, which is one of the candidates for the dust sample collector, is assessed by arcjet heating tests to examine its behavior when exposed to high-temperature gases, as well as by particle impingement tests to evaluate its dust capturing capability.

Feasibility study of a 110 watt per kilogram lightweight solar array system

NASA Technical Reports Server (NTRS)

Shepard, N. F.; Stahle, C. V.; Hanson, K. L.; Schneider, A.; Blomstrom, L. E.; Hansen, W. T.; Kirpich, A.

1973-01-01

The feasibility of a 10,000 watt solar array panel which has a minimum power-to-mass ratio of 110 watt/kg is discussed. The application of this ultralightweight solar array to three possible missions was investigated. With the interplanetary mission as a baseline, the constraining requirements for a geosynchronous mission and for a manned space station mission are presented. A review of existing lightweight solar array system concepts revealed that changes in the system approach are necessary to achieve the specified 110 watt/kg goal. A comprehensive review of existing component technology is presented in the areas of thin solar cells, solar cell covers, welded interconnectors, substrates and deployable booms. Advances in the state-of-the-art of solar cell and deployable boom technology were investigated. System level trade studies required to select the optimum boom bending stiffness, system aspect ratio, bus voltage level, and solar cell circuit arrangement are reported. Design analysis tasks included the thermal analysis of the solar cell blanket, thermal stress analysis of the solar cell interconnectors/substrate, and the thermostructural loading of the deployed boom.

Collaborative Middle School Geometry through Blogs and Other Web 2.0 Technologies

ERIC Educational Resources Information Center

Hossain, Mokter; Wiest, Lynda R.

2013-01-01

This paper explores the use of blogs, a simple application of Web 2.0 technologies, in middle school geometry instruction. Specifically, it provides an overview of the interactive features of Web 2.0 technologies and the feasibility of using Web 2.0 technologies in geometry teaching and learning, as well as a proposed model for creating a…

Reusable launch vehicle: Technology development and test program

NASA Technical Reports Server (NTRS)

1995-01-01

The National Aeronautics and Space Administration (NASA) requested that the National Research Council (NRC) assess the Reusable Launch Vehicle (RLV) technology development and test programs in the most critical component technologies. At a time when discretionary government spending is under close scrutiny, the RLV program is designed to reduce the cost of access to space through a combination of robust vehicles and a streamlined infrastructure. Routine access to space has obvious benefits for space science, national security, commercial technologies, and the further exploration of space. Because of technological challenges, knowledgeable people disagree about the feasibility of a single-stage-to-orbit (SSTO) vehicle. The purpose of the RLV program proposed by NASA and industry contractors is to investigate the status of existing technology and to identify and advance key technology areas required for development and validation of an SSTO vehicle. This report does not address the feasibility of an SSTO vehicle, nor does it revisit the roles and responsibilities assigned to NASA by the National Transportation Policy. Instead, the report sets forth the NRC committee's findings and recommendations regarding the RLV technology development and test program in the critical areas of propulsion, a reusable cryogenic tank system (RCTS), primary vehicle structure, and a thermal protection system (TPS).

Feasibility study, software design, layout and simulation of a two-dimensional Fast Fourier Transform machine for use in optical array interferometry

NASA Technical Reports Server (NTRS)

Boriakoff, Valentin

1994-01-01

The goal of this project was the feasibility study of a particular architecture of a digital signal processing machine operating in real time which could do in a pipeline fashion the computation of the fast Fourier transform (FFT) of a time-domain sampled complex digital data stream. The particular architecture makes use of simple identical processors (called inner product processors) in a linear organization called a systolic array. Through computer simulation the new architecture to compute the FFT with systolic arrays was proved to be viable, and computed the FFT correctly and with the predicted particulars of operation. Integrated circuits to compute the operations expected of the vital node of the systolic architecture were proven feasible, and even with a 2 micron VLSI technology can execute the required operations in the required time. Actual construction of the integrated circuits was successful in one variant (fixed point) and unsuccessful in the other (floating point).

Feasibility and usability of a home monitoring concept based on mobile phones and near field communication (NFC) technology.

PubMed

Morak, Jürgen; Kollmann, Alexander; Schreier, Günter

2007-01-01

Utilization of mobile information and communication technologies in home monitoring applications is becoming more and more common. The mobile phone, acting as a patient terminal for patients suffering from chronic diseases, provides an active link to the caregiver to transmit health status information and receive feedback. In such a concept the usability is still limited by the necessity of entering the values via the mobile phone's small keypad. The near field communication technology (NFC), a touch-based wireless interface that became available recently, may improve the usability level of such applications significantly. The focus of this paper is to describe the development of a prototype application based on this technology embedded in a home monitoring system. The feasibility and usability of this approach are evaluated and compared with concepts used in previous approaches. The high quantifier with respect to overall usability indicates that NFC may be the technology of choice for some tasks in home monitoring applications.

Microbiological aspects related to the feasibility of PEF technology for food pasteurization.

PubMed

Saldaña, G; Álvarez, I; Condón, S; Raso, J

2014-01-01

Processing unit operations that seek to inactivate harmful microorganisms are of primary importance in ascertaining the safety of food. The capability of pulsed electric fields (PEF) to inactivate vegetative cells of microorganisms at temperatures below those used in thermal processing makes this technology very attractive as a nonthermal pasteurization process for the food industry. Commercial exploitation of this technology for food pasteurization requires the identification of the most PEF-resistant microorganisms that are of concern to public health. Then, the treatment conditions applicable at industrial scale that would reduce the population of these microorganisms to a level that guarantees food safety must be defined. The objective of this paper is to critically compile recent, relevant knowledge with the purpose of enhancing the feasibility of using PEF technology for food pasteurization and underlining the required research for designing PEF pasteurization processes.

The "Interval Walking in Colorectal Cancer" (I-WALK-CRC) study: Design, methods and recruitment results of a randomized controlled feasibility trial.

PubMed

Banck-Petersen, Anna; Olsen, Cecilie K; Djurhuus, Sissal S; Herrstedt, Anita; Thorsen-Streit, Sarah; Ried-Larsen, Mathias; Østerlind, Kell; Osterkamp, Jens; Krarup, Peter-Martin; Vistisen, Kirsten; Mosgaard, Camilla S; Pedersen, Bente K; Højman, Pernille; Christensen, Jesper F

2018-03-01

Low physical activity level is associated with poor prognosis in patients with colorectal cancer (CRC). To increase physical activity, technology-based platforms are emerging and provide intriguing opportunities to prescribe and monitor active lifestyle interventions. The "Interval Walking in Colorectal Cancer"(I-WALK-CRC) study explores the feasibility and efficacy a home-based interval-walking intervention delivered by a smart-phone application in order to improve cardio-metabolic health profile among CRC survivors. The aim of the present report is to describe the design, methods and recruitment results of the I-WALK-CRC study.Methods/Results: The I-WALK-CRC study is a randomized controlled trial designed to evaluate the feasibility and efficacy of a home-based interval walking intervention compared to a waiting-list control group for physiological and patient-reported outcomes. Patients who had completed surgery for local stage disease and patients who had completed surgery and any adjuvant chemotherapy for locally advanced stage disease were eligible for inclusion. Between October 1st , 2015, and February 1st , 2017, 136 inquiries were recorded; 83 patients were eligible for enrollment, and 42 patients accepted participation. Age and employment status were associated with participation, as participants were significantly younger (60.5 vs 70.8 years, P < 0.001) and more likely to be working (OR 5.04; 95%CI 1.96-12.98, P < 0.001) than non-participants. In the present study, recruitment of CRC survivors was feasible but we aim to better the recruitment rate in future studies. Further, the study clearly favored younger participants. The I-WALK-CRC study will provide important information regarding feasibility and efficacy of a home-based walking exercise program in CRC survivors.

Remote Manipulator System (RMS)-based Controls-Structures Interaction (CSI) flight experiment feasibility study

NASA Technical Reports Server (NTRS)

Demeo, Martha E.

1990-01-01

The feasibility of an experiment which will provide an on-orbit validation of Controls-Structures Interaction (CSI) technology, was investigated. The experiment will demonstrate the on-orbit characterization and flexible-body control of large flexible structure dynamics using the shuttle Remote Manipulator System (RMS) with an attached payload as a test article. By utilizing existing hardware as well as establishing integration, operation and safety algorithms, techniques and procedures, the experiment will minimize the costs and risks of implementing a flight experiment. The experiment will also offer spin-off enhancement to both the Shuttle RMS (SRMS) and the Space Station RMS (SSRMS).

Rail accelerator technology and applications

NASA Technical Reports Server (NTRS)

Zana, L. M.; Kerslake, W. R.

1985-01-01

Rail accelerators offer a viable means of launching ton-size payloads from the Earth's surface to space. The results of two mission studies which indicate that an Earth-to-Space Rail Launcher (ESRL) system is not only technically feasible but also economically beneficial, particularly when large amounts of bulk cago are to be delivered to space are given. An in-house experimental program at the Lewis Research Center (LeRC) was conducted in parallel with the mission studies with the objective of examining technical feasibility issues. A 1 m long - 12.5 by 12.5 mm bore rail accelerator as designed with clear polycarbonate sidewalls to visually observe the plasma armature acceleration. The general character of plasma/projectile dynamics is described for a typical test firing.

Technical/commercial feasibility study of the production of fuel-grade ethanol from corn: 100-million-gallon-per-year production facility in Myrtle Grove, Louisiana

NASA Astrophysics Data System (ADS)

1982-05-01

The technical and economic feasibility of producing motor fuel alcohol from corn in a 100 million gallon per year plant to be constructed in Myrtle Grove, Louisiana is evaluated. The evaluation includes a detailed process design using proven technology, a capital cost estimate for the plant, a detailed analysis of the annual operating cost, a market study, a socioeconomic, environmental, health and safety analysis, and a complete financial analysis. Several other considerations for production of ethanol were evaluated including: cogeneration and fuel to be used in firing the boilers; single by-products vs. multiple by-products; and use of boiler flue gas for by-product drying.

Spacecraft on-board SAR image generation for EOS-type missions

NASA Technical Reports Server (NTRS)

Liu, K. Y.; Arens, W. E.; Assal, H. M.; Vesecky, J. F.

1987-01-01

Spacecraft on-board synthetic aperture radar (SAR) image generation is an extremely difficult problem because of the requirements for high computational rates (usually on the order of Giga-operations per second), high reliability (some missions last up to 10 years), and low power dissipation and mass (typically less than 500 watts and 100 Kilograms). Recently, a JPL study was performed to assess the feasibility of on-board SAR image generation for EOS-type missions. This paper summarizes the results of that study. Specifically, it proposes a processor architecture using a VLSI time-domain parallel array for azimuth correlation. Using available space qualifiable technology to implement the proposed architecture, an on-board SAR processor having acceptable power and mass characteristics appears feasible for EOS-type applications.

Application of active controls technology to the NASA Jet Star airplane

NASA Technical Reports Server (NTRS)

Lange, R. H.; Cahill, J. F.; Campion, M. C.; Bradley, E. S.; Macwilkinson, D. G.; Phillips, J. W.

1975-01-01

The feasibility was studied of modifying a Jet Star airplane into a demonstrator of benefits to be achieved from incorporating active control concepts in the preliminary design of transport type aircraft. Substantial benefits are shown in terms of fuel economy and community noise by virtue of reduction in induced drag through use of a high aspect ratio wing which is made possible by a gust alleviation system. An intermediate configuration was defined which helps to isolate the benefits produced by active controls technology from those due to other configuration variables. Also, an alternate configuration which incorporated composite structures, but not active controls technology, was defined in order to compare the benefits of composite structures with those of active controls technology.

Feasibility Study of Commercial Markets for New Sample Acquisition Devices

NASA Technical Reports Server (NTRS)

Brady, Collin; Coyne, Jim; Bilen, Sven G.; Kisenwether, Liz; Miller, Garry; Mueller, Robert P.; Zacny, Kris

2010-01-01

The NASA Exploration Systems Mission Directorate (ESMD) and Penn State technology commercialization project was designed to assist in the maturation of a NASA SBIR Phase III technology. The project was funded by NASA's ESMD Education group with oversight from the Surface Systems Office at NASA Kennedy Space Center in the Engineering Directorate. Two Penn State engineering student interns managed the project with support from Honeybee Robotics and NASA Kennedy Space Center. The objective was to find an opportunity to integrate SBIR-developed Regolith Extractor and Sampling Technology as the payload for the future Lunar Lander or Rover missions. The team was able to identify two potential Google Lunar X Prize organizations with considerable interest in utilizing regolith acquisition and transfer technology.

The simultaneous isolation of multiple high and low frequent T-cell populations from donor peripheral blood mononuclear cells using the major histocompatibility complex I-Streptamer isolation technology.

PubMed

Roex, Marthe C J; Hageman, Lois; Heemskerk, Matthias T; Veld, Sabrina A J; van Liempt, Ellis; Kester, Michel G D; Germeroth, Lothar; Stemberger, Christian; Falkenburg, J H Frederik; Jedema, Inge

2018-04-01

Adoptive transfer of donor-derived T cells can be applied to improve immune reconstitution in immune-compromised patients after allogeneic stem cell transplantation. The separation of beneficial T cells from potentially harmful T cells can be achieved by using the major histocompatibility complex (MHC) I-Streptamer isolation technology, which has proven its feasibility for the fast and pure isolation of T-cell populations with a single specificity. We have analyzed the feasibility of the simultaneous isolation of multiple antigen-specific T-cell populations in one procedure by combining different MHC I-Streptamers. First, the effect of combining different amounts of MHC I-Streptamers used in the isolation procedure on the isolation efficacy of target antigen-specific T cells and on the number of off-target co-isolated contaminating cells was assessed. The feasibility of this approach was demonstrated in large-scale validation procedures targeting both high and low frequent T-cell populations using the Good Manufacturing Practice (GMP)-compliant CliniMACS Plus device. T-cell products targeting up to 24 different T-cell populations could be isolated in one, simultaneous MHC I-Streptamer procedure, by adjusting the amount of MHC I- Streptamers per target antigen-specific T-cell population. Concurrently, the co-isolation of potentially harmful contaminating T cells remained below our safety limit. This technology allows the reproducible isolation of high and low frequent T-cell populations. However, the expected therapeutic relevance of direct clinical application without in vitro expansion of these low frequent T-cell populations is questionable. This study provides a feasible, fast and safe method for the generation of highly personalized MHC I-Streptamer isolated T-cell products for adoptive immunotherapy. Copyright © 2018 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

Optical intersatellite links - Application to commercial satellite communications

NASA Technical Reports Server (NTRS)

Paul, D.; Faris, F.; Garlow, R.; Inukai, T.; Pontano, B.; Razdan, R.; Ganz, Aura; Caudill, L.

1992-01-01

Application of optical intersatellite links for commercial satellite communications services is addressed in this paper. The feasibility of commercialization centers around basic issues such as the need and derived benefits, implementation complexity and overall cost. In this paper, commercialization of optical ISLs is assessed in terms of the services provided, systems requirements and feasibility of appropriate technology. Both long- and short-range ISLs for GEO-GEO, GEO-LEO and LEO applications are considered. Impact of systems requirements on the payload design and use of advanced technology in reducing its mass, power, and volume requirements are discussed.

Diabetes and Technology for Increased Activity (DaTA) Study: Results of a Remote Monitoring Intervention for Prevention of Metabolic Syndrome

PubMed Central

Stuckey, Melanie; Russell-Minda, Elizabeth; Read, Emily; Munoz, Claudio; Shoemaker, Kevin; Kleinstiver, Peter; Petrella, Robert

2011-01-01

Objective: An increasingly aged, overweight, and sedentary population has resulted in elevated risk of cardiovascular disease (CVD). The escalating incidence of diabetes and other chronic illnesses, deficits in health care budgets, and physician shortages, especially in rural communities, have prompted investigations of feasible solutions. The Diabetes and Technology for Increased Activity (DaTA) study was designed to test the effectiveness of a lifestyle intervention driven by self-monitoring of blood glucose (BG), blood pressure (BP), physical activity (PA), and weight to positively impact CVD risk factors in a medically underserviced rural population with a high incidence of metabolic syndrome (MS). Research Design and Methods: Conducted in a community-based research setting, this single-center open feasibility study used smart phones to transmit BP, BG, pedometer, weight, heart rate, and activity measurements to a database. Technology allowed participants to interface with the clinical team and self-monitor their personal health indicators. Results Twenty-four participants aged 30 to 71 years completed the 8-week intervention. Participants had significant improvement in clinic (p = .046) and self-monitored diastolic BP (p = .001), body mass index (p = .002), and total cholesterol (p = .009), and steps per day. Daily PA increased as well as participants' interest in and willingness to make lifestyle changes that impact health outcomes. Conclusions The DaTA study demonstrated that self-monitoring of the risk factors for MS and increased PA improved the participant's CVD risk profile. Considering the 8-week time period of this intervention, results are encouraging. This lifestyle intervention, which uses education and technology as tools, confirms the utility of remote health monitoring. PMID:21880236

Feasibility of Robotics and Machine Vision in Military Combat Ration Inspection (Short Term Project STP No. 11)

DTIC Science & Technology

1994-06-01

signals. Industrial robot controllers have several general purpose ports which can be programmed within manipulator program. In this way the gen ri...well as a fanc - tional end- effector was developed and evaluated. The workcell was found technologically feasible; however, further experimental work

Teen Choices, an Online Stage-Based Program for Healthy, Nonviolent Relationships: Development and Feasibility Trial

ERIC Educational Resources Information Center

Levesque, Deborah A.; Johnson, Janet L.; Prochaska, Janice M.

2017-01-01

This article describes the theoretical foundation, development, and feasibility testing of an online, evidence-based intervention for teen dating violence prevention designed for dissemination. Teen Choices, a program for healthy, nonviolent relationships, relies on the transtheoretical model of behavior change and expert system technology to…

Technology to Support Teachers Using Evidence from Student Work to Customize Technology-Enhanced Inquiry Units

ERIC Educational Resources Information Center

Matuk, Camillia F.; Linn, Marcia C.; Eylon, Bat-Sheva

2015-01-01

Teachers' involvement in curriculum design is essential for sustaining the relevance of technology-enhanced learning materials. Customizing--making small adjustments to tailor given materials to particular situations and settings--is one design activity in which busy teachers can feasibly engage. Research indicates that customizations based…

How Might the Use of Technology in Formative Assessment Support Changes in Mathematics Teaching?

ERIC Educational Resources Information Center

Olsher, Shai; Yerushalmy, Michal; Chazan, Daniel

2016-01-01

Technological developments make it feasible to assess students' mathematics work automatically when students are working in rich digital environments and thus offer important affordances for assessment in the service of instruction. In this article, we illustrate how these technological advances might be harnessed to support the work of teachers…

Using a Red Team to devise countermeasures

NASA Astrophysics Data System (ADS)

Swedenburg, R. L.

1995-01-01

The ability of a defense system to operate effectively when deployed in battle is dependent on designs able to deal with countermeasures against the defense. The formation of a technical Red Team to stress the preliminary designs of the defensive system with technologically feasible and effective potential countermeasures provides a means to identify such potential countermeasures. This paper describes the experience of the U.S. Ballistic Missile Defense Organization's (BMDO) Theater Missile Defense Red Team since the Gulf War in 1991, the Red-Blue Exchange process, and the value it has provided to the designers of the U.S. Theater Missile Defense systems for developing robust systems. A wide-range of technologically feasible countermeasures has been devised, analyzed, tested for feasibility, and provided to the system developers for mitigation design. The process for independently analyzing possible susceptibilities of preliminary designs and exploiting the susceptibilities to identify possible countermeasures is explained. Designing and characterizing the Red Team's countermeasures, determining their feasibility, and analyzing their potential effectiveness against the defense are explained. A technique for the Blue Team's designers to deal with a wide range of potential countermeasures is explained.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ali T-Raissi

The aim of this work was to assess issues of cost, and performance associated with the production and storage of hydrogen via following three feedstocks: sub-quality natural gas (SQNG), ammonia (NH{sub 3}), and water. Three technology areas were considered: (1) Hydrogen production utilizing SQNG resources, (2) Hydrogen storage in ammonia and amine-borane complexes for fuel cell applications, and (3) Hydrogen from solar thermochemical cycles for splitting water. This report summarizes our findings with the following objectives: Technoeconomic analysis of the feasibility of the technology areas 1-3; Evaluation of the hydrogen production cost by technology areas 1; and Feasibility of ammoniamore » and/or amine-borane complexes (technology areas 2) as a means of hydrogen storage on-board fuel cell powered vehicles. For each technology area, we reviewed the open literature with respect to the following criteria: process efficiency, cost, safety, and ease of implementation and impact of the latest materials innovations, if any. We employed various process analysis platforms including FactSage chemical equilibrium software and Aspen Technologies AspenPlus and HYSYS chemical process simulation programs for determining the performance of the prospective hydrogen production processes.« less

The Feasibility of a Decision Support System for the Determination of Source Selection Evaluation Criteria

DTIC Science & Technology

1984-09-01

is not only difficult and time consuming , but also crucial to the success of the project, the question is whether a decision support system designed...KtI I - uAujvhIMtf IENE In THE FEASIBILITY OF A DECISION SUPPORT SYSTEM FOR THE DETERMINATION OF SOURCE SELECTION EVALUATION ’CRITERIA THESIS .2...INSTITUTE OF TECHNOLOGY Wright-Patterson Air Force Base, Ohio DZM=0N STATEMENT A ,’r !’ILMILSHIM S /8 4 THE FEASIBILITY OF A DECISION SUPPORT SYSTEM FOR

The Feasibility and Acceptability of "Arise": An Online Substance Abuse Relapse Prevention Program.

PubMed

Sanchez, Rebecca Polley; Bartel, Chelsea M

2015-04-01

The purpose of this study was to test the feasibility and acceptability of a novel online adolescent substance abuse relapse prevention tool, "Arise" (3C Institute, Cary, NC). The program uses an innovative platform including interactive instructional segments and skill-building games to help adolescents learn and practice coping skills training strategies. We conducted a pilot test with nine adolescents in substance abuse treatment (44 percent female) and a feasibility test with treatment providers (n=8; 50 percent female). Adolescents interacted with the program via a secure Web site for approximately 30 minutes for each of two instructional units. Treatment providers reviewed the same material at their own pace. All participants completed a questionnaire with items assessing usability, acceptability, understanding, and subjective experience of the program. Regarding feasibility, recruitment of this population within the study constraints proved challenging, but participant retention in the trial was high (no attrition). Adolescents and treatment providers completed the program with no reported problems, and overall we were able to collect data as planned. Regarding acceptability, the program received strong ratings from both adolescents and providers, who found the prototype informative, engaging, and appealing. Both groups strongly recommended continuing development. We were able to deliver the intervention as intended, and acceptability ratings were high, demonstrating the feasibility and acceptability of online delivery of engaging interactive interventions. This study contributes to our understanding of how interactive technologies, including games, can be used to modify behavior in substance abuse treatment and other health areas.

Solar power satellite system definition study. Volume 1, phase 1: Executive summary

NASA Technical Reports Server (NTRS)

1979-01-01

A systems definition study of the solar satellite system (SPS) is presented. The technical feasibility of solar power satellites based on forecasts of technical capability in the various applicable technologies is assessed. The performance, cost, operational characteristics, reliability, and the suitability of SPS's as power generators for typical commercial electricity grids are discussed. The uncertainties inherent in the system characteristics forecasts are assessed.

Utilizing Three-Dimensional Printing Technology to Assess the Feasibility of High-Fidelity Synthetic Ventricular Septal Defect Models for Simulation in Medical Education.

PubMed

Costello, John P; Olivieri, Laura J; Krieger, Axel; Thabit, Omar; Marshall, M Blair; Yoo, Shi-Joon; Kim, Peter C; Jonas, Richard A; Nath, Dilip S

2014-07-01

The current educational approach for teaching congenital heart disease (CHD) anatomy to students involves instructional tools and techniques that have significant limitations. This study sought to assess the feasibility of utilizing present-day three-dimensional (3D) printing technology to create high-fidelity synthetic heart models with ventricular septal defect (VSD) lesions and applying these models to a novel, simulation-based educational curriculum for premedical and medical students. Archived, de-identified magnetic resonance images of five common VSD subtypes were obtained. These cardiac images were then segmented and built into 3D computer-aided design models using Mimics Innovation Suite software. An Objet500 Connex 3D printer was subsequently utilized to print a high-fidelity heart model for each VSD subtype. Next, a simulation-based educational curriculum using these heart models was developed and implemented in the instruction of 29 premedical and medical students. Assessment of this curriculum was undertaken with Likert-type questionnaires. High-fidelity VSD models were successfully created utilizing magnetic resonance imaging data and 3D printing. Following instruction with these high-fidelity models, all students reported significant improvement in knowledge acquisition (P < .0001), knowledge reporting (P < .0001), and structural conceptualization (P < .0001) of VSDs. It is feasible to use present-day 3D printing technology to create high-fidelity heart models with complex intracardiac defects. Furthermore, this tool forms the foundation for an innovative, simulation-based educational approach to teach students about CHD and creates a novel opportunity to stimulate their interest in this field. © The Author(s) 2014.

250 Robotic Pancreatic Resections: Safety and Feasibility

PubMed Central

Zureikat, Amer H.; Moser, A. James; Boone, Brian A.; Bartlett, David L.; Zenati, Mazen; Zeh, Herbert J.

2015-01-01

Background and Objectives Computer Assisted Robotic Surgery allows complex resections and anastomotic reconstructions to be performed with nearly identical standards to open surgery. We applied this technology to a variety of pancreatic resections to assess the safety, feasibility, versatility and reliability of this technology. Methods A retrospective review of a prospective database of robotic pancreatic resections at a single institution between August 2008 and November 2012 was performed. Peri-operative outcomes were analyzed. Results 250 consecutive robotic pancreatic resections were analyzed; pancreaticoduodenectomy (PD =132), distal pancreatectomy (DP=83), central pancreatectomy (CP=13), pancreatic enucleation (10), total pancreatectomy (TP=5), Appleby resection (4), and Frey procedure (3). Thirty day and 90 day mortality was 0.8 % and 2.0%. Rate of Clavien 3 and 4 complications was 14 and 6 %. The ISGPF grade C fistula rate was 4%. Mean operative time for the two most common procedures was 529 ± 103 mins for PD, and 257 ± 93 mins for DP. Continuous improvement in operative times was observed over the course of the experience. Conversion to open procedure was required in 16 patients (6%);(11 PD, 2 DP, 2 CP, 1 TP) for failure to progress (14) and bleeding (2). Conclusions This represents to our knowledge the largest series of robotic pancreatic resections. Safety and feasibility metrics including the low incidence of conversion support the robustness of this platform and suggest no unanticipated risks inherent to this new technology. By defining these early outcome metrics this report begins to establish a framework for comparative effectiveness studies of this platform. PMID:24002300

Feasibility of large-scale deployment of multiple wearable sensors in Parkinson's disease

PubMed Central

Hahn, Tim; Evers, Luc J. W.; de Vries, Nienke M.; Cohen, Eli; Afek, Michal; Bataille, Lauren; Daeschler, Margaret; Claes, Kasper; Boroojerdi, Babak; Terricabras, Dolors; Little, Max A.; Baldus, Heribert; Bloem, Bastiaan R.; Faber, Marjan J.

2017-01-01

Wearable devices can capture objective day-to-day data about Parkinson’s Disease (PD). This study aims to assess the feasibility of implementing wearable technology to collect data from multiple sensors during the daily lives of PD patients. The Parkinson@home study is an observational, two-cohort (North America, NAM; The Netherlands, NL) study. To recruit participants, different strategies were used between sites. Main enrolment criteria were self-reported diagnosis of PD, possession of a smartphone and age≥18 years. Participants used the Fox Wearable Companion app on a smartwatch and smartphone for a minimum of 6 weeks (NAM) or 13 weeks (NL). Sensor-derived measures estimated information about movement. Additionally, medication intake and symptoms were collected via self-reports in the app. A total of 953 participants were included (NL: 304, NAM: 649). Enrolment rate was 88% in the NL (n = 304) and 51% (n = 649) in NAM. Overall, 84% (n = 805) of participants contributed sensor data. Participants were compliant for 68% (16.3 hours/participant/day) of the study period in NL and for 62% (14.8 hours/participant/day) in NAM. Daily accelerometer data collection decreased 23% in the NL after 13 weeks, and 27% in NAM after 6 weeks. Data contribution was not affected by demographics, clinical characteristics or attitude towards technology, but was by the platform usability score in the NL (χ2 (2) = 32.014, p<0.001), and self-reported depression in NAM (χ2(2) = 6.397, p = .04). The Parkinson@home study shows that it is feasible to collect objective data using multiple wearable sensors in PD during daily life in a large cohort. PMID:29261709

SmartPark Technology Demonstration Project

DOT National Transportation Integrated Search

2013-11-01

The purpose of FMCSAs SmartPark initiative is to determine the feasibility of a technology for providing truck parking space availability in real time to truckers on the road. SmartPark consists of two phases. Phase I was a field operational test ...

Social Stories™ to alleviate challenging behaviour and social difficulties exhibited by children with autism spectrum disorder in mainstream schools: design of a manualised training toolkit and feasibility study for a cluster randomised controlled trial with nested qualitative and cost-effectiveness components.

PubMed

Wright, Barry; Marshall, David; Adamson, Joy; Ainsworth, Hannah; Ali, Shehzad; Allgar, Victoria; Collingridge Moore, Danielle; Cook, Elizabeth; Dempster, Paul; Hackney, Lisa; McMillan, Dean; Trepél, Dominic; Williams, Chris

2016-01-01

A Social Story™ (Carol Gray) is a child-friendly intervention that is used to give children with autism spectrum disorders (ASDs) social information in situations where they have social difficulties. Limited evidence mainly using single-case designs suggests that they can reduce anxiety and challenging behaviour. The objectives were to conduct a systematic review, use this to develop a manualised intervention and run a feasibility trial to inform a fully powered randomised controlled trial (RCT) on their clinical effectiveness and cost-effectiveness in schools. This is a three-stage study following the Medical Research Council framework for complex interventions. Specifically, it involved a theoretical phase, a qualitative stage and a feasibility trial stage. Qualitative interviews and focus groups took place in Child and Adolescent Mental Health Service and primary care settings. The feasibility study took place in 37 local mainstream schools. Fifty children (aged 5-15 years) in mainstream school settings with a diagnosis of ASD were entered into the trial. For each child, an associated teacher and parent was also recruited. The intervention was a goal-setting session followed by a manualised toolkit (including a training session) for creating Social Stories™ for use with school-aged children. The comparator treatment was a goal-setting session followed by an attention control. Both arms received treatment as usual. Outcomes tested as part of the feasibility study included child- and proxy-completed questionnaires for mental health, quality of life and goal-based outcome measures. Adults additionally completed behaviour diaries and the parental stress index. The review found that the research into social stories is predominantly based in the USA, carried out in under-12-year-olds and using single-case designs. Most studies either did not follow established Social Story criteria or did not report if they did. The assessment of effectiveness presents a largely positive picture but is limited by methodological issues. There were no adequate RCTs and insufficient information to assess a number of important sources of potential bias in most studies. A manualised intervention was produced using an iterative process between user focus groups and a writing team, and assessed in the feasibility study. All 50 participant groups were recruited within the study time frame. Two outcome measures, the Social Responsiveness Scale-2 and the custom-made goal-based measure, showed high levels of completion rates and appeared to be capturing social and behaviour skills targeted by the use of Social Stories. Detailed recommendations for a full trial are provided. Blinding of participants was not feasible. Treatment fidelity was not assessed because of low levels of story return rates. The study showed that a fully powered RCT is feasible with an extended geographical footprint. A large amount of data and information has helped to inform the design of this RCT, which will be the subject of a future research grant application. Future work could focus on developing an appropriate blinded outcome measure for this population. This study is registered as PROSPERO CRD42011001440. Current Controlled Trials ISRCTN96286707. This project was funded by the NIHR Health Technology Assessment programme and will be published in full in Health Technology Assessment; Vol. 20, No. 6. See the NIHR Journals Library website for further project information.

150 Passenger Commercial Aircraft

NASA Technical Reports Server (NTRS)

Bucovsky, Adrian; Romli, Fairuz I.; Rupp, Jessica

2002-01-01

It has been projected that the need for a short-range mid-sized, aircraft is increasing. The future strategy to decrease long-haul flights will increase the demand for short-haul flights. Since passengers prefer to meet their destinations quickly, airlines will increase the frequency of flights, which will reduce the passenger load on the aircraft. If a point-to-point flight is not possible, passengers will prefer only a one-stop short connecting flight to their final destination. A 150-passenger aircraft is an ideal vehicle for these situations. It is mid-sized aircraft and has a range of 3000 nautical miles. This type of aircraft would market U.S. domestic flights or inter-European flight routes. The objective of the design of the 150-passenger aircraft is to minimize fuel consumption. The configuration of the aircraft must be optimized. This aircraft must meet CO2 and NOx emissions standards with minimal acquisition price and operating costs. This report contains all the work that has been performed for the completion of the design of a 150 passenger commercial aircraft. The methodology used is the Technology Identification, Evaluation, and Selection (TIES) developed at Georgia Tech Aerospace Systems Design laboratory (ASDL). This is an eight-step conceptual design process to evaluate the probability of meeting the design constraints. This methodology also allows for the evaluation of new technologies to be implemented into the design. The TIES process begins with defining the problem with a need established and a market targeted. With the customer requirements set and the target values established, a baseline concept is created. Next, the design space is explored to determine the feasibility and viability of the baseline aircraft configuration. If the design is neither feasible nor viable, new technologies can be implemented to open up the feasible design space and allow for a plausible solution. After the new technologies are identified, they must be evaluated to determine the physical compatibility of integrating multiple technologies and then the impact on the design, both improvements and degradations, must be determined. These technologies are assessed deterministically. Again, Response Surface Equations (RSEs) are developed to allow for a full factorial evaluation of the combinations of the technologies. The best combination of technologies is selected and then the design space is again reevaluated for feasibility and viability.

Research on optimal path planning algorithm of task-oriented optical remote sensing satellites

NASA Astrophysics Data System (ADS)

Liu, Yunhe; Xu, Shengli; Liu, Fengjing; Yuan, Jingpeng

2015-08-01

GEO task-oriented optical remote sensing satellite, is very suitable for long-term continuous monitoring and quick access to imaging. With the development of high resolution optical payload technology and satellite attitude control technology, GEO optical remote sensing satellites will become an important developing trend for aerospace remote sensing satellite in the near future. In the paper, we focused on GEO optical remote sensing satellite plane array stare imaging characteristics and real-time leading mission of earth observation mode, targeted on satisfying needs of the user with the minimum cost of maneuver, and put forward the optimal path planning algorithm centered on transformation from geographic coordinate space to Field of plane, and finally reduced the burden of the control system. In this algorithm, bounded irregular closed area on the ground would be transformed based on coordinate transformation relations in to the reference plane for field of the satellite payload, and then using the branch and bound method to search for feasible solutions, cutting off the non-feasible solution in the solution space based on pruning strategy; and finally trimming some suboptimal feasible solutions based on the optimization index until a feasible solution for the global optimum. Simulation and visualization presentation software testing results verified the feasibility and effectiveness of the strategy.

Feasibility study of molecular memory device based on DNA using methylation to store information

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jiang, Liming; Al-Dirini, Feras; Center for Neural Engineering

DNA, because of its robustness and dense information storage capability, has been proposed as a potential candidate for next-generation storage media. However, encoding information into the DNA sequence requires molecular synthesis technology, which to date is costly and prone to synthesis errors. Reading the DNA strand information is also complex. Ideally, DNA storage will provide methods for modifying stored information. Here, we conduct a feasibility study investigating the use of the DNA 5-methylcytosine (5mC) methylation state as a molecular memory to store information. We propose a new 1-bit memory device and study, based on the density functional theory and non-equilibriummore » Green's function method, the feasibility of electrically reading the information. Our results show that changes to methylation states lead to changes in the peak of negative differential resistance which can be used to interrogate memory state. Our work demonstrates a new memory concept based on methylation state which can be beneficial in the design of next generation DNA based molecular electronic memory devices.« less

Wheel configurations for combined energy storage and attitude control systems

NASA Technical Reports Server (NTRS)

Oglevie, R. E.

1985-01-01

Integrated power and attitude control system (IPACS) studies performed over a decade ago established the feasibility of simultaneously storing electrical energy in wheels and utilizing the resulting momentum for spacecraft attitude control. It was shown that such a system possessed many advantages over other contemporary energy storage and attitude control systems in many applications. More recent technology advances in composite rotors, magnetic bearings, and power control electronics have triggered new optimism regarding the feasibility and merits of such a system. This paper presents the results of a recent study whose focus was to define an advanced IPACS and to evaluate its merits for the Space Station application. Emphasis is given to the selection of the wheel configuration to perform the combined functions. A component design concept is developed to establish the system performance capability. A system-level trade study, including life-cycle costing, is performed to define the merits of the system relative to two other candidate systems. It is concluded that an advanced IPACS concept is not only feasible but offers substantial savings in mass and life-cycle cost.

NEMO: Status of the Project

NASA Astrophysics Data System (ADS)

Migneco, E.; Aiello, S.; Amato, E.; Ambriola, M.; Ameli, F.; Andronico, G.; Anghinolfi, M.; Battaglieri, M.; Bellotti, R.; Bersani, A.; Boldrin, A.; Bonori, M.; Cafagna, F.; Capone, A.; Caponnetto, L.; Chiarusi, T.; Circella, M.; Cocimano, R.; Coniglione, R.; Cordelli, M.; Costa, M.; Cuneo, S.; D'Amico, A.; D'Amico, V.; De Marzo, C.; De Vita, R.; Distefano, C.; Gabrielli, A.; Gandolfi, E.; Grimaldi, A.; Habel, R.; Italiano, A.; Leonardi, M.; Lo Nigro, L.; Lo Presti, D.; Margiotta, A.; Martini, A.; Masetti, M.; Masullo, R.; Montaruli, T.; Mosetti, R.; Musumeci, M.; Nicolau, C. A.; Occhipinti, R.; Papaleo, R.; Petta, C.; Piattelli, P.; Raia, G.; Randazzo, N.; Reito, S.; Ricco, G.; Riccobene, G.; Ripani, M.; Romita, M.; Rovelli, A.; Ruppi, M.; Russo, G. V.; Russo, M.; Sapienza, P.; Schuller, J. P.; Sedita, M.; Sokalski, I.; Spurio, M.; Taiuti, M.; Trasatti, L.; Ursella, L.; Valente, V.; Vicini, P.; Zanarini, G.

2004-11-01

The activities towards the realisation of a km3 Cherenkov neutrino detector, carried out by the NEMO Collaboration are described. Long term exploration of a 3500 m deep site close to the Sicilian coast has shown that it is optimal for the installation of the detector. A complete feasibility study, that has considered all the components of the detector as well as its deployment, has been carried out demonstrating that technological solutions exist for the realization of an underwater km3 detector. The realization of a technological demonstrator (the NEMO Phase 1 project) is under way.

Nemo:. a Project for a KM3 Underwater Detector for Astrophysical Neutrinos in the Mediterranean Sea

NASA Astrophysics Data System (ADS)

Amore, I.; Aiello, S.; Ambriola, M.; Ameli, F.; Anghinolfi, M.; Anzalone, A.; Barbarino, G.; Barbarito, E.; Battaglieri, M.; Bellotti, R.; Beverini, N.; Bonori, M.; Bouhadef, B.; Brescia, M.; Cacopardo, G.; Cafagna, F.; Capone, A.; Caponetto, L.; Castorina, E.; Ceres, A.; Chiarusi, T.; Circella, M.; Cocimano, R.; Coniglione, R.; Cordelli, M.; Costa, M.; Cuneo, S.; D'Amico, A.; de Bonis, G.; de Marzo, C.; de Rosa, G.; de Vita, R.; Distefano, C.; Falchini, E.; Fiorello, C.; Flaminio, V.; Fratini, K.; Gabrielli, A.; Galeotti, S.; Gandolfi, E.; Giacomelli, G.; Giorgi, F.; Grimaldi, A.; Habel, R.; Leonora, E.; Lonardo, A.; Longo, G.; Lo Presti, D.; Lucarelli, F.; Maccioni, E.; Margiotta, A.; Martini, A.; Masullo, R.; Megna, R.; Migneco, E.; Mongelli, M.; Montaruli, T.; Morganti, M.; Musumeci, M. S.; Nicolau, C. A.; Orlando, A.; Osipenko, M.; Osteria, G.; Papaleo, R.; Pappalardo, V.; Petta, C.; Piattelli, P.; Raia, G.; Randazzo, N.; Reito, S.; Ricco, G.; Riccobene, G.; Ripani, M.; Rovelli, A.; Ruppi, M.; Russo, G. V.; Russo, S.; Sapienza, P.; Sedita, M.; Shirokov, E.; Simeone, F.; Sipala, V.; Spurio, M.; Taiuti, M.; Terreni, G.; Trasatti, L.; Urso, S.; Valente, V.; Vicini, P.

The status of the project is described: the activity on long term characterization of water optical and oceanographic parameters at the Capo Passero site candidate for the Mediterranean km3 neutrino telescope; the feasibility study; the physics performances and underwater technology for the km3; the activity on NEMO Phase 1, a technological demonstrator that has been deployed at 2000 m depth 25 km offshore Catania; the realization of an underwater infrastructure at 3500 m depth at the candidate site (NEMO Phase 2).

Design, processing and testing of LSI arrays, hybrid microelectronics task

NASA Technical Reports Server (NTRS)

Himmel, R. P.; Stuhlbarg, S. M.; Ravetti, R. G.; Zulueta, P. J.; Rothrock, C. W.

1979-01-01

Mathematical cost models previously developed for hybrid microelectronic subsystems were refined and expanded. Rework terms related to substrate fabrication, nonrecurring developmental and manufacturing operations, and prototype production are included. Sample computer programs were written to demonstrate hybrid microelectric applications of these cost models. Computer programs were generated to calculate and analyze values for the total microelectronics costs. Large scale integrated (LST) chips utilizing tape chip carrier technology were studied. The feasibility of interconnecting arrays of LSU chips utilizing tape chip carrier and semiautomatic wire bonding technology was demonstrated.

Reducing the stair step effect of layer manufactured surfaces by ball burnishing

NASA Astrophysics Data System (ADS)

Hiegemann, Lars; Agarwal, Chiranshu; Weddeling, Christian; Tekkaya, A. Erman

2016-10-01

The layer technology enables fast and flexible additive manufacturing of forming tools. The disadvantages of this system is the formation of stair steps in the range of tool radii. Within this work a new method to smooth this stair steps by ball burnishing is introduced. This includes studies on the general feasibility of the process and the determination of the influence of the rolling parameters. The investigations are carried out experimentally and numerically. Ultimately, the gained knowledge is applied to finish a deep drawing tool which is manufactured by layer technology.

SP-100 program developments

NASA Technical Reports Server (NTRS)

Schnyer, A. D.; Sholtis, J. A., Jr.; Wahlquist, E. J.; Verga, R. L.; Wiley, R. L.

1985-01-01

An update is provided on the status of the Sp-100 Space Reactor Power Program. The historical background that led to the program is reviewed and the overall program objectives and development approach are discussed. The results of the mission studies identify applications for which space nuclear power is desirable and even essential. Results of a series of technology feasibility experiments are expected to significantly improve the earlier technology data base for engineering development. The conclusion is reached that a nuclear reactor space power system can be developed by the early 1990s to meet emerging mission performance requirements.

Mechanical Technology Development on A 35-m Deployable Radar Antenna for Monitoring Hurricanes

NASA Technical Reports Server (NTRS)

Fang, Houfei; Im, Eastwood

2006-01-01

The NEXRAD in Space project develops a novel instrument concept and the associated antenna technologies for a 35-GHz Doppler radar to monitor hurricanes, cyclones, and severe storms from a geostationary orbit. Mechanical challenges of this concept include a 35-m diameter lightweight in space deployable spherical reflector and a feeder scanning mechanism. The feasibility of using shape memory polymer material to develop the large deployable reflector has been investigated by this study. A spiral scanning mechanism concept has been developed and demonstrated by an engineering model.

Removal of nitrogen oxides from gas streams by biofiltration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barrett, K.B.; Barnes, J.M.; Apel, W.A.

1994-12-31

Nitrogen oxides (NO{sub x}) are primary air pollutants and, as such, there is considerable interest in the development of efficient, cost effective technologies to remediate NO{sub x} containing emissions. Biofiltration involves the venting of contaminated gas streams through biologically active material such as soil or compost. This technology has been used successfully to control odors as well as volatile organic compounds from a variety of industrial and public sources. The purpose of this study was to evaluate the feasibility of using biofiltration to convert NO{sub x} to nitrogen gas.

Satellite Power Systems (SPS) concept definition study exhibit C. Volume 3: Experimental verification definition

NASA Technical Reports Server (NTRS)

1979-01-01

An environmentally oriented microwave technology exploratory research program aimed at reducing the uncertainty associated with microwave power system critical technical issues is described. Topics discussed include: (1) Solar Power Satellite System (SPS) development plan elements; (2) critical technology issues related to the SPS preliminary reference configuration; (3) pilot plant to demonstrate commercial viability of the SPS system; and (4) research areas required to demonstrate feasibility of the SPS system. Progress in the development of advanced GaAs solar cells is reported along with a power distribution subsystem.

Emerging technologies for communication satellite payloads

NASA Astrophysics Data System (ADS)

Yüceer, Mehmet

2012-04-01

Recent developments in payload designs will allow more flexible and efficient use of telecommunication satellites. Important modifications in repeater designs, antenna structures and spectrum policies open up exciting opportunities for GEO satellites to support a variety of emerging applications, ranging from telemedicine to real-time data transfer between LEO satellite and ground station. This study gives information about the emerging technologies in the design of communication satellites' transceiver subsystem and demonstrates the feasibility of using fiber optic links for the local oscillator distribution in future satellite payloads together with the optical inter-satellite link.

Results of a nurse-led intervention: connecting pediatric cancer patients from the hospital to the school using videoconferencing technologies.

PubMed

Ellis, Sarah J; Drew, Donna; Wakefield, Claire E; Saikal, Samra L; Punch, Deborah; Cohn, Richard J

2013-01-01

The objectives of this study were to assess the feasibility and perceived academic/psychosocial outcomes of a pilot program using videoconferencing facilities to connect children with cancer to their home school. Eight parents, three patients, and five teachers (n = 16) participated in semistructured interviews evaluating the efficacy/feasibility of this program. Results were analyzed using the qualitative framework of Miles and Huberman. Parents reported that videoconferencing provided the family with a sense of normalcy and connection to the outside world (4/8), often boosting patients' mood (6/8). Further benefits included stronger relationships with classmates and teachers (15/16) and improved peer acceptance and school reintegration. There were no notable impacts on patients' academic progression. Reported barriers included: costs, time commitments, bureaucratic hurdles, and technical and logistical difficulties. Videoconferencing technologies provide an important tool to connect childhood cancer patients to their classrooms; however, further solution-based investigation is warranted to overcome existing barriers.

Experimental feasibility of investigating acoustic waves in Couette flow with entropy and pressure gradients

NASA Technical Reports Server (NTRS)

Parrott, Tony L.; Zorumski, William E.; Rawls, John W., Jr.

1990-01-01

The feasibility is discussed for an experimental program for studying the behavior of acoustic wave propagation in the presence of strong gradients of pressure, temperature, and flow. Theory suggests that gradients effects can be experimentally observed as resonant frequency shifts and mode shape changes in a waveguide. A convenient experimental geometry for such experiments is the annular region between two co-rotating cylinders. Radial temperature gradients in a spinning annulus can be generated by differentially heating the two cylinders via electromagnetic induction. Radial pressure gradients can be controlled by varying the cylinder spin rates. Present technology appears adequate to construct an apparatus to allow independent control of temperature and pressure gradients. A complicating feature of a more advanced experiment, involving flow gradients, is the requirement for independently controlled cylinder spin rates. Also, the boundary condition at annulus terminations must be such that flow gradients are minimally disturbed. The design and construction of an advanced apparatus to include flow gradients will require additional technology development.

Cryogenic On-Orbit Liquid Depot Storage, Acquisition, and Transfer satellite (COLD-SAT) feasibility study

NASA Technical Reports Server (NTRS)

Bailey, William J.; Weiner, Stephen P.; Beekman, Douglas H.; Dennis, Mark F.; Martin, Timothy A.

1990-01-01

The Cryogenic On-Orbit Liquid Depot Storage, Acquisition, and Transfer Satellite (COLD-SAT) is an experimental spacecraft launched from an expendable launch vehicle which is designed to investigate the systems and technologies required for efficient, effective, and reliable management of cryogenic fluid in the reduced gravity space environment. The COLD-SAT program will provide the necessary data base and provide low-g proving of fluid and thermal models of cryogenic storage, transfer, and resupply concepts and processes. A conceptual approach was developed and an overview of the results of the 24 month COLD-SAT Phase A feasibility is described which includes: (1) a definition of the technology needs and the accompanying experimental 3 month baseline mission; (2) a description of the experiment subsystem, major features and rationale for satisfaction of primary and secondary experiment requirements using liquid hydrogen as the test fluid; and (3) a presentation of the conceptual design of the COLD-SAT spacecraft subsystems which support the on-orbit experiment with emphasis on areas of greatest challenge.