Teacher candidates in an online post-baccalaureate science methods course: Implications for teaching science inquiry with technology

NASA Astrophysics Data System (ADS)

Colon, Erica L.

Online learning is becoming more prevalent in today's education and is changing the way students learn and instructors teach. This study proposed using an informative case study design within a multilevel conceptual framework as teacher candidates were learning to teach and use science inquiry while in an online post-baccalaureate science methods course. The purposes were to (a) explore whether the teacher candidates had a thorough understanding of scientific inquiry and how to implement higher-order thinking skills, (b) examine whether or not the teacher candidates used a variety of computer-based instructional technologies when choosing instructional objectives, and (c) identify barriers that impede teacher candidates from using science inquiry or technology singly, or the ability to incorporate technology into learning science inquiry. The findings indicate that an online approach in preparing science teachers holds great potential for using innovative technology to teach science inquiry. First, the teacher candidates did incorporate essential features of classroom inquiry, however it was limited and varied in the type of inquiry used. Second, of the 86 lesson plans submitted by the teacher candidates, less than twelve percent of the learning objectives involved higher-order skills that promoted science inquiry. Third, results supported that when using technology in their lesson planning, participants had widely varying backgrounds in reference to their familiarity with technology. However, even though each participant used some form or another, the technology used was fairly low level. Finally, when discussing implementing inquiry-based science in the lesson plans, this study identified time as a reason that participants may not be pushing for more inquiry-based lessons. The researcher also identifies that school placements were a huge factor in the amount of inquiry-based skills coded in the lesson plans. The study concludes that online teacher preparation programs hold promise for teacher candidates by providing them knowledge and strategies for implementing innovative technologies to teach science inquiry when designing curriculum. By identifying specific implications for methods course design and implementation, as well as future research, this study contributes to teacher education improvement efforts, and therefore supports changing learning styles of their future students, so-called the iGeneration.

The Effects of Web 2.0 Technologies Usage in Programming Languages Lesson on the Academic Success, Interrogative Learning Skills and Attitudes of Students towards Programming Languages

ERIC Educational Resources Information Center

Gençtürk, Abdullah Tarik; Korucu, Agah Tugrul

2017-01-01

It is observed that teacher candidates receiving education in the department of Computer and Instructional Technologies Education are not able to gain enough experience and knowledge in "Programming Languages" lesson. The goal of this study is to analyse the effects of web 2.0 technologies usage in programming languages lesson on the…

Lessons Learned and Technical Standards: A Logical Marriage

NASA Technical Reports Server (NTRS)

Gill, Paul; Vaughan, William W.; Garcia, Danny; Gill, Maninderpal S. (Technical Monitor)

2001-01-01

A comprehensive database of lessons learned that corresponds with relevant technical standards would be a boon to technical personnel and standards developers. The authors discuss the emergence of one such database within NASA, and show how and why the incorporation of lessons learned into technical standards databases can be an indispensable tool for government and industry. Passed down from parent to child, teacher to pupil, and from senior to junior employees, lessons learned have been the basis for our accomplishments throughout the ages. Government and industry, too, have long recognized the need to systematically document And utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. The use of lessons learned is a principle component of any organizational culture committed to continuous improvement. They have formed the foundation for discoveries, inventions, improvements, textbooks, and technical standards. Technical standards are a very logical way to communicate these lessons. Using the time-honored tradition of passing on lessons learned while utilizing the newest in information technology, the National Aeronautics and Space Administration (NASA) has launched an intensive effort to link lessons learned with specific technical standards through various Internet databases. This article will discuss the importance of lessons learned to engineers, the difficulty in finding relevant lessons learned while engaged in an engineering project, and the new NASA project that can help alleviate this difficulty. The article will conclude with recommendations for more expanded cross-sectoral uses of lessons learned with reference to technical standards.

The Status of Ubiquitous Computing.

ERIC Educational Resources Information Center

Brown, David G.; Petitto, Karen R.

2003-01-01

Explains the prevalence and rationale of ubiquitous computing on college campuses--teaching with the assumption or expectation that all faculty and students have access to the Internet--and offers lessons learned by pioneering institutions. Lessons learned involve planning, technology, implementation and management, adoption of computer-enhanced…

What Does Design and Technology Learning Really Look Like?

ERIC Educational Resources Information Center

Southall, Mary

2016-01-01

This paper presents findings from a research study investigating the relationship between "intended" learning and "actual" learning in Design and Technology lessons (Southall, 2015). The research focused upon the "pre active" phase of the teaching-learning process, that is the teacher's planning processes and…

The role of failure/problems in engineering: A commentary of failures experienced - lessons learned

NASA Technical Reports Server (NTRS)

Ryan, R. S.

1992-01-01

The written version of a series of seminars given to several aerospace companies and three NASA centers are presented. The results are lessons learned through a study of the problems experienced in 35 years of engineering. The basic conclusion is that the primary cause of problems has not been mission technologies, as important as technology is, but the neglect of basic principles. Undergirding this is the lack of a systems focus from determining requirements through design, verification, and operations phases. Many of the concepts discussed are fundamental to total quality management (TQM) and can be used to augment this product enhanced philosophy. Fourteen principles are addressed with problems experienced and are used as examples. Included is a discussion of the implication of constraints, poorly defined requirements, and schedules. Design guidelines, lessons learned, and future tasks are listed. Two additional sections are included that deal with personal lessons learned and thoughts on future thrusts (TQM).

Interactive Learning: Vignettes from America's Most Wired Campuses.

ERIC Educational Resources Information Center

Brown, David G., Ed.

This book presents a collection of best practices in using instructional technology from 42 college campuses. In 93 brief, informal, and practical vignettes, professors show how they transformed courses with technology, discuss how the technology affects teaching and learning, and distill important lessons learned. The book is divided into two…

Overcoming K-12 Teacher Resistance to Technology and Learning Using M-Learning

ERIC Educational Resources Information Center

Rinelli, Karen

2013-01-01

This study served to examine the relationship between reflective mobile technology training for teachers and enhanced lessons prepared by teachers, using collaboration and reflection with teacher colleagues to integrate mobile learning and technology. The researcher also examined the relationship between modeling risk-taking behaviors with mobile…

Heritage Adoption Lessons Learned: Cover Deployment and Latch Mechanism

NASA Technical Reports Server (NTRS)

Wincentsen, James

2006-01-01

Within JPL, there is a technology thrust need to develop a larger Cover Deployment and Latch Mechanism (CDLM) for future missions. The approach taken was to adopt and scale the CDLM design as used on the Galaxy Evolution Explorer (GALEX) project. The three separate mechanisms that comprise the CDLM will be discussed in this paper in addition to a focus on heritage adoption lessons learned and specific examples. These lessons learned will be valuable to any project considering the use of heritage designs.

Supporting Teachers Learning Through the Collaborative Design of Technology-Enhanced Science Lessons

NASA Astrophysics Data System (ADS)

Kafyulilo, Ayoub C.; Fisser, Petra; Voogt, Joke

2015-12-01

This study used the Interconnected Model of Professional Growth (Clarke & Hollingsworth in Teaching and Teacher Education, 18, 947-967, 2002) to unravel how science teachers' technology integration knowledge and skills developed in a professional development arrangement. The professional development arrangement used Technological Pedagogical Content Knowledge as a conceptual framework and included collaborative design of technology-enhanced science lessons, implementation of the lessons and reflection on outcomes. Support to facilitate the process was offered in the form of collaboration guidelines, online learning materials, exemplary lessons and the availability of an expert. Twenty teachers participated in the intervention. Pre- and post-intervention results showed improvements in teachers' perceived and demonstrated knowledge and skills in integrating technology in science teaching. Collaboration guidelines helped the teams to understand the design process, while exemplary materials provided a picture of the product they had to design. The availability of relevant online materials simplified the design process. The expert was important in providing technological and pedagogical support during design and implementation, and reflected with teachers on how to cope with problems met during implementation.

Project management lessons learned on SDIO's Delta Star and Single Stage Rocket Technology programs

NASA Technical Reports Server (NTRS)

Klevatt, Paul L.

1992-01-01

The topics are presented in viewgraph form and include the following: a Delta Star (Delta 183) Program Overview, lessons learned, and rapid prototyping and the Single Stage Rocket Technology (SSRT) Program. The basic objective of the Strategic Defense Initiative Programs are to quickly reduce key uncertainties to a manageable range of parameters and solutions, and to yield results applicable to focusing subsequent research dollars on high payoff areas.

Managing Differences in Stakeholder Relationships and Organizational Cultures in E-Learning Development: Lessons from the UK eUniversity Experience

ERIC Educational Resources Information Center

Conole, Grainne; Carusi, Annamaria; de Laat, Maarten; Wilcox, Pauline; Darby, Jonathan

2006-01-01

This paper presents some of the initial findings of a series of studies documenting the UK eUniversity (UKeU) approach to and experience of e-learning. It will focus on the experiences and lessons learned of members of the learning technology team within the UKeU or people working closely with them. Our particular interest is to describe the…

Preparing for the Worst: Psychological Excellence of First Responders - A Katrina Lessons Learned Study

DTIC Science & Technology

2008-01-01

cases on human cognition and performance. For instance, when you learn to fly an airplane, you will be instructed to use a simple rule to avoid...Existing Training Technologies; First Responders; Katrina; Lesson Learned 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER... student . Based in Maryland, the training institute prepares first responders using online learning courses or training exercises. Such topics

Cognitive Anatomy of Tutor Learning: Lessons Learned with SimStudent

ERIC Educational Resources Information Center

Matsuda, Noboru; Yarzebinski, Evelyn; Keiser, Victoria; Raizada, Rohan; Cohen, William W.; Stylianides, Gabriel J.; Koedinger, Kenneth R.

2013-01-01

This article describes an advanced learning technology used to investigate hypotheses about learning by teaching. The proposed technology is an instance of a teachable agent, called SimStudent, that learns skills (e.g., for solving linear equations) from examples and from feedback on performance. SimStudent has been integrated into an online,…

Evaluating Primary School Student's Deep Learning Approach to Science Lessons

ERIC Educational Resources Information Center

Ilkörücü Göçmençelebi, Sirin; Özkan, Muhlis; Bayram, Nuran

2012-01-01

This study examines the variables which help direct students to a deep learning approach to science lessons, with the aim of guiding programmers and teachers in primary education. The sample was composed of a total of 164 primary school students. The Learning Approaches to Science Scale developed by Ünal (2005) for Science and Technology lessons…

Leveraging New Technologies for Professional Learning in Education: Digital Literacies as Culture Shift in Professional Development

ERIC Educational Resources Information Center

Murphy, Janet; Lebans, Robert

2009-01-01

Providing just-in-time job-embedded professional learning using a technologically mediated model achieves professional growth goals and encourages teachers to build digital literacy competencies and incorporate new technologies in instructional approaches in the classroom. This article highlights the lessons learned from an award-winning…

Lessons from the Past Look to the Future.

ERIC Educational Resources Information Center

Howden, Hilde

2000-01-01

Technological advances and many other changes in society change how and what students learn. Indicates the need to learn lessons from the past in order to be more mathematically literate and broaden the mathematics curriculum to a mathematical sciences curriculum that incorporates 21st century mathematics. (Contains 14 references.) (ASK)

TBAL: Technology-Based Active Learning in Higher Education

ERIC Educational Resources Information Center

Ghilay, Yaron; Ghilay, Ruth

2015-01-01

In many institutions of higher education worldwide, faculty members manage lessons based on information transfer whereas their students become passive listeners. According to international research, passive learning has disadvantages mainly because students do not engage in the lesson. The study introduces a new model for higher education called…

Lessons learned from a pilot project of an automatic vehicle location system in an urban winter maintenance operations setting.

DOT National Transportation Integrated Search

2002-01-01

This report documents the lessons learned during the evolution of the Virginia Department of Transportation's pilot project to use an automatic vehicle location (AVL) system during winter maintenance operations in an urban setting. AVL is a technolog...

The Effects of Role Modeling on Technology Integration within Physical Education Teacher Education

ERIC Educational Resources Information Center

Baert, Helena

2014-01-01

The national standards for physical education teacher education (PETE) in the US state that teacher candidates should be able to plan and implement technology infused lessons that meet lesson objectives and enhance learning in physical education (standard 3.7). Research shows that role modeling of technology integration can have a positive impact…

CVX Damage Control Information Technology Evolutionary Model

DTIC Science & Technology

1999-03-01

technology -based learning generally) may be exciting technically, it does not automatically lead to better educational programs. Good instructional design...expected to act on the first Aircraft Carrier to attempt substantial manning reductions if nothing is learned from Smart Ship. Beyond the technologies ... technology of the day. Many of the lessons learned then are in use today. However, technology breakthroughs we are now experiencing invite us to

Student Views of Technology

ERIC Educational Resources Information Center

Eisenkraft, Arthur

2011-01-01

Current instructional and learning models insist that when teachers prepare lessons for their technology and engineering classes, they must begin with a sense of what students already know. In preparing lessons, many teachers use their years of classroom experience as data to inform them about students' prior knowledge and about student…

Lessons learned applying CASE methods/tools to Ada software development projects

NASA Technical Reports Server (NTRS)

Blumberg, Maurice H.; Randall, Richard L.

1993-01-01

This paper describes the lessons learned from introducing CASE methods/tools into organizations and applying them to actual Ada software development projects. This paper will be useful to any organization planning to introduce a software engineering environment (SEE) or evolving an existing one. It contains management level lessons learned, as well as lessons learned in using specific SEE tools/methods. The experiences presented are from Alpha Test projects established under the STARS (Software Technology for Adaptable and Reliable Systems) project. They reflect the front end efforts by those projects to understand the tools/methods, initial experiences in their introduction and use, and later experiences in the use of specific tools/methods and the introduction of new ones.

Teachers' Use of Technology in Elementary Reading Lessons

ERIC Educational Resources Information Center

McDermott, Peter; Gormley, Kathleen A.

2016-01-01

Proponents claim technology will transform classroom teaching and improve children's engagement and learning. Opponents argue that such benefits are oversold because little evidence exists that technology improves teaching and learning. We examined how elementary teachers in an urban school that was well resourced with technology used it when…

Teachers' Use of Technology: Lessons Learned from the Teacher Education Program to the Classroom

ERIC Educational Resources Information Center

Wright, Vivian H.; Wilson, Elizabeth K.

2011-01-01

This paper describes 10 teachers' perceptions of technology integration and technology use in their classrooms, five years after their graduation from a teacher education program which encouraged technology use in teaching and learning. The researchers used Hooper and Rieber's (1999) five phases of technology use (familiarization, utilization,…

Enhancing e-Learning Content by Using Semantic Web Technologies

ERIC Educational Resources Information Center

García-González, Herminio; Gayo, José Emilio Labra; del Puerto Paule-Ruiz, María

2017-01-01

We describe a new educational tool that relies on Semantic Web technologies to enhance lessons content. We conducted an experiment with 32 students whose results demonstrate better performance when exposed to our tool in comparison with a plain native tool. Consequently, this prototype opens new possibilities in lessons content enhancement.

The Design of Lessons Using Mathematics Analysis Software to Support Multiple Representations in Secondary School Mathematics

ERIC Educational Resources Information Center

Pierce, Robyn; Stacey, Kaye; Wander, Roger; Ball, Lynda

2011-01-01

Current technologies incorporating sophisticated mathematical analysis software (calculation, graphing, dynamic geometry, tables, and more) provide easy access to multiple representations of mathematical problems. Realising the affordances of such technology for students' learning requires carefully designed lessons. This paper reports on design…

E-Learning, Engineering, and Learners of African Descent: A Needs Analysis

ERIC Educational Resources Information Center

Eugene, Wanda; Clark, Kevin

2012-01-01

The rapid growth and short history of e-Learning technologies and the desire to see these technologies integrated into the learning process have caused a lack of specific guidance and firm foundation of principles on which to base instructional choices. Lessons cultivated in the Learning Sciences about the cultural influences of learning provide a…

Building technological capability within satellite programs in developing countries

NASA Astrophysics Data System (ADS)

Wood, Danielle; Weigel, Annalisa

2011-12-01

This paper explores the process of building technological capability in government-led satellite programs within developing countries. The key message is that these satellite programs can learn useful lessons from literature in the international development community. These lessons are relevant to emerging satellite programs that leverage international partnerships in order to establish local capability to design, build and operate satellites. Countries with such programs include Algeria, Nigeria, Turkey, Malaysia and the United Arab Emirates. The paper first provides background knowledge about space activity in developing countries, and then explores the nuances of the lessons coming from the international development literature. Developing countries are concerned with satellite technology because satellites provide useful services in the areas of earth observation, communication, navigation and science. Most developing countries access satellite services through indirect means such as sharing data with foreign organizations. More countries, however, are seeking opportunities to develop satellite technology locally. There are objective, technically driven motivations for developing countries to invest in satellite technology, despite rich debate on this topic. The paper provides a framework to understand technical motivations for investment in satellite services, hardware, expertise and infrastructure in both short and long term. If a country decides to pursue such investments they face a common set of strategic decisions at the levels of their satellite program, their national context and their international relationships. Analysis of past projects shows that countries have chosen diverse strategies to address these strategic decisions and grow in technological capability. What is similar about the historical examples is that many countries choose to leverage international partnerships as part of their growth process. There are also historical examples from outside the space arena in which organizations have pursued technological capability. Scholars have analyzed these examples and developed insightful frameworks. The paper draws key concepts from this literature about the nature of development, technology, knowledge and organizational learning. These concepts are relevant to learning in new satellite programs, but the ideas must be applied cautiously because of the nature of satellite technology. The paper draws three major lessons from the international development literature regarding absorptive capacity, tacit knowledge and organizational learning; it synthesizes these lessons into a cohesive, original framework. The closing section proposes future work on a detailed study of technological learning in specific government satellite programs.

Lessons Learned on "Scaling Up" of Projects

ERIC Educational Resources Information Center

Viadero, Debra

2007-01-01

Having developed a technology-based teaching unit on weather that appeared to work well for middle school students, Nancy Butler Songer and her colleagues at the University of Michigan decided in the late 1990s to take the next logical step in their research program: They scaled up. This article discusses lessons learned by several faculty…

Information technology enters the doctor's office: Part II--Six lessons about intended ... and unintended ... results.

PubMed

Frankel, P; Chernow, R; Rosenberg, W

1994-02-01

Part I of this article ("Six Design and Implementation Lessons," Physician Executive, Sept.-Oct. 1993, pp. 46-50) described an ambulatory utilization review (AUR) program designed and implemented by Metropolitan Life Insurance Company and reviewed some of the lessons learned over the past five years. Those lessons pertained to the tasks of inventing a new information technology to measure and evaluate ambulatory care and some of the practical implementation issues associated with review of 30,000 small dollar value claims per day in 19 claim offices nationwide. This article turns to the basic purpose of AUR--to review the medical necessity and appropriateness of ambulatory utilization. One lesson learned about AUR in this context is that AUR works: savings from the program outweigh costs by almost 5:1. The more important lessons, however, stem from understanding how the savings are achieved, and what some of the other unintended benefits of the program are.

Trickle down Technology: Tech Lessons Learned from Higher Ed

ERIC Educational Resources Information Center

O'Hanlon, Charlene

2010-01-01

Care has to be taken when relating technology's use in college and university lecture halls to the way it's applied in K-12 classrooms. Differences in pedagogy, learning styles, and even attendance can impact the way the respective students in the two environments consume technology, which in turn impacts the technology's effectiveness as a…

Building a Global Learning Organization: Lessons from the World's Top Corporations.

ERIC Educational Resources Information Center

Marquardt, Michael J.

1995-01-01

Research on 50 organizations elicited 19 attributes of learning organizations: individual learning, group learning, streamlined structure, corporate learning culture, empowerment, environmental scanning, knowledge creation/transfer, learning technology, quality, learning strategy, supportive atmosphere, teamwork/networking, vision, acculturation,…

MC-1 Engine Valves, Lessons Learned

NASA Technical Reports Server (NTRS)

Laszar, John

2003-01-01

Many lessons were learned during the development of the valves for the MC-1 engine. The purpose of this report is to focus on a variety of issues related to the engine valves and convey the lessons learned. This paper will not delve into detailed technical analysis of the components. None of the lessons learned are new or surprising, but simply reinforce the importance of addressing the details of the design early, at the component level. The Marshall Space Flight Center (MSFC), Huntsville, Alabama developed the MC-1 engine, a LOX / FW-1, 60,000 pound thrust engine. This engine was developed under the Low Cost Boost Technology office at MSFC and proved to be a very successful project for the MSFC Propulsion team and the various subcontractors working the development of the engine and its components.

Fast, Affordable, Science and Technology Satellite (FASTSAT) Huntsville-01 (HSV-01) Spacecraft Lessons Learned Report

NASA Technical Reports Server (NTRS)

Smith, Timothy A.

2012-01-01

The Fast Affordable Science and Technology Satellite (FASTSAT) project is a path finding effort to produce reliable satellite busses for different applications at an unprecedented speed and low cost. The project is designed to be a generational project and the first satellite produced is the Huntsville -01 (HSV-01) spacecraft. The subject of this report is the lessons learned gained during the development, testing, and up to the delivery of the FASTSAT HSV -01 spacecraft. The purpose of this report is to capture the major findings that will greatly benefit the future FASTSAT satellites and perhaps other projects interested in pushing the boundaries for cost and schedule. The FASTSAT HSV -01 primary objectives, success criteria, and team partners are summarized to give a frame of reference to the lessons learned.

Atmospheric/Space Environment Support Lessons Learned Regarding Aerospace Vehicle Design and Operations

NASA Technical Reports Server (NTRS)

Vaughan, William W.; Anderson, B. Jeffrey

2005-01-01

In modern government and aerospace industry institutions the necessity of controlling current year costs often leads to high mobility in the technical workforce, "one-deep" technical capabilities, and minimal mentoring for young engineers. Thus, formal recording, use, and teaching of lessons learned are especially important in the maintenance and improvement of current knowledge and development of new technologies, regardless of the discipline area. Within the NASA Technical Standards Program Website http://standards.nasa.gov there is a menu item entitled "Lessons Learned/Best Practices". It contains links to a large number of engineering and technical disciplines related data sets that contain a wealth of lessons learned information based on past experiences. This paper has provided a small sample of lessons learned relative to the atmospheric and space environment. There are many more whose subsequent applications have improved our knowledge of the atmosphere and space environment, and the application of this knowledge to the engineering and operations for a variety of aerospace programs.

Investigation of Technology Integrated Instruction in Art Education: A Case Study of Exploring Learning Achievement

ERIC Educational Resources Information Center

Lee, Szu Hsin; Tseng, Hui Ching

2008-01-01

In today's studies of how computer technologies are used in college art lessons, limited examples are focused on both digital instructional technology design and learning achievement. This study attempts to measure the learning achievement of college students from two intact groups in an art class when a multimedia form of instruction was utilized…

The Interactions among Information Technology Organizational Learning, Project Learning, and Project Success

ERIC Educational Resources Information Center

McKay, Donald S., II

2012-01-01

Knowledge gained from completed information technology (IT) projects was not often shared with emerging project teams. Learning lessons from other project teams was not pursued because people lack time, do not see value in learning, fear a potentially painful process, and had concerns that sharing knowledge will hurt their career. Leaders could…

The Foot Engine: A Learning Styles Approach to Teaching History through Technology.

ERIC Educational Resources Information Center

Benson, Bernard W.; Eaves, Judith Y.

1985-01-01

This minicourse can be used in secondary U.S. history courses to teach about the social, economic, industrial, and technological changes that can be triggered by a single technological innovation. The lesson contains sequenced activities that alternatively stress right and left brain modes of learning. (RM)

Digital Natives: Fifth-Grade Students' Authentic and Ritualistic Engagement with Technology

ERIC Educational Resources Information Center

Dietrich, Trevor; Balli, Sandra J.

2014-01-01

Thirty four fifth-grade students were interviewed about classroom learning and technology. Interview data were considered through Schlechty's (2002) levels of engagement framework to explore students' authentic or ritualistic engagement during technology supported lessons. Student engagement is defined as interest in and commitment to learning.…

Criteria for successful uptake of AAL technologies: lessons learned from Norwegian pilot projects.

PubMed

Svagård, Ingrid; Ausen, Dag; Standal, Kristin

2013-01-01

Implementation of AAL-technology as an integrated part of public health and care services requires a systematic and multidisciplinary approach. There are several challenges that need to be handled in parallel and with sustained effort over time, to tackle the multidimensional problem of building the value chain that is required for widespread uptake of AAL technology. Several pilot projects are on-going in Norway, involving municipalities, technology providers and research partners. Examples are "Home Safety" (NO: Trygghetspakken) and "Safe Tracks" (NO: Trygge spor). This paper will elaborate on our lessons learned with focus on five main points: 1) User-friendly and robust technology 2) Technology adapted organization 3) Service oriented technology providers 4) Care service organizations as demanding customer and 5) Sustainable financial model.

AFRL Solid Propellant Laboratory Explosive Siting and Renovation Lessons Learned

DTIC Science & Technology

2010-05-19

AFRL Solid Propellant Laboratory Explosive Siting and Renovation Lessons Learned Daniel F. Schwartz Air Force Research Laboratory ...9. SPONSORING / MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10. SPONSOR/MONITOR’S ACRONYM(S) Air Force Research Laboratory (AFMC) AFRL /RZS...provide the United States Air Force with advanced rocket propulsion technologies, the Air Force Research

Local markets for global health technologies: lessons learned from advancing 6 new products.

PubMed

Matthias, Dipika Mathur; Taylor, Catharine H; Sen, Debjeet; Metzler, Mutsumi

2014-05-01

Key components to support local institutional and consumer markets are: supply chain, finance, clinical use, and consumer use. Key lessons learned: (1) Build supply and demand simultaneously. (2) Support a lead organization to drive the introduction process. (3) Plan for scale up from the start. (4) Profitability for the private sector is an absolute.

A Telepresence Learning Environment for Opera Singing: Distance Lessons Implementations over Internet2

ERIC Educational Resources Information Center

Alpiste Penalba, Francisco; Rojas-Rajs, Teresa; Lorente, Pedro; Iglesias, Francisco; Fernández, Joaquín; Monguet, Josep

2013-01-01

The Opera eLearning project developed a solution for opera singing distance lessons at the graduate level, using high bandwidth to deliver a quality audio and video experience that has been evaluated by singing teachers, chorus and orchestra directors, singers and other professional musicians. Prior to finding a technological model that suits the…

Lessons Learned from the Private Sector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robichaud, Robert J

This session is focused on lessons learned from private sector energy projects that could be applied to the federal sector. This presentation tees up the subsequent presentations by outlining the differences between private and federal sectors in objectives, metrics for determining success, funding resources/mechanisms, payback and ROI evaluation, risk tolerance/aversion, new technology adoption perspectives, and contracting mechanisms.

Library 101: Why, How, and Lessons Learned

ERIC Educational Resources Information Center

Porter, Michael; King, David Lee

2010-01-01

This article describes how and why the Library 101 Project was created and the lessons that the developers learned out of this project. The Library 101 is a project that challenges librarians to revise the paradigm of "basic" library services in order to remain relevant in this technology-driven world. It was developed by Michael Porter,…

Mobile English Learning: An Evidence-Based Study with Fifth Graders

ERIC Educational Resources Information Center

Sandberg, Jacobijn; Maris, Marinus; de Geus, Kaspar

2011-01-01

Three groups participated in a study on the added value of mobile technology for learning English as a second language for primary school students. The first group had classroom lessons in English about zoo animals and their characteristics. The second group took classroom lessons and worked with a mobile application on location in a public zoo.…

Adapting a Technology-Based Implementation Support Tool for Community Mental Health: Challenges and Lessons Learned.

PubMed

Livet, Melanie; Fixsen, Amanda

2018-01-01

With mental health services shifting to community-based settings, community mental health (CMH) organizations are under increasing pressure to deliver effective services. Despite availability of evidence-based interventions, there is a gap between effective mental health practices and the care that is routinely delivered. Bridging this gap requires availability of easily tailorable implementation support tools to assist providers in implementing evidence-based intervention with quality, thereby increasing the likelihood of achieving the desired client outcomes. This study documents the process and lessons learned from exploring the feasibility of adapting such a technology-based tool, Centervention, as the example innovation, for use in CMH settings. Mixed-methods data on core features, innovation-provider fit, and organizational capacity were collected from 44 CMH providers. Lessons learned included the need to augment delivery through technology with more personal interactions, the importance of customizing and integrating the tool with existing technologies, and the need to incorporate a number of strategies to assist with adoption and use of Centervention-like tools in CMH contexts. This study adds to the current body of literature on the adaptation process for technology-based tools and provides information that can guide additional innovations for CMH settings.

Connecting Learning & Technology for Effective Lesson Plan Design.

ERIC Educational Resources Information Center

Seamon, Mary P.

This paper focuses on the design of effective lesson plans using the Internet. Effective lesson design helps students to explore ideas, acquire and synthesize information, and frame and solve problems. The creative problem solving which depends upon context, interrelationships, and real-world activities is available through Internet projects.…

Dwarfing the Social? Nanotechnology Lessons from the Biotechnology Front

ERIC Educational Resources Information Center

Einsiedel, Edna F.; Goldenberg, Linda

2004-01-01

Biotechnology and nanotechnology are both strategic technologies, and the former provides several lessons that could contribute to more successful embedding and integration processes for the latter. This article identifies some of the key questions emerging from the biotechnology experience and summarizes several lessons learned in the context of…

Teaching East Asia: China, Japan, Korea. Lesson Plans for Middle School Teachers. Volume II.

ERIC Educational Resources Information Center

Beville, Francie; Boone, Mark; Chapman, Kelly; Crump, Claudia; Curtis, Lonnie; Erickson, Stacy; Kaiser-Polge, Tami; Klus, John A.; Luebbehusen, Mary Lou; Rea, Patrick S.; Ward, Mary E.

This volume contains 23 lesson plans that were written for middle school teachers to help students learn about East Asia. The lessons are organized across six themes: (1) "People, Places & Environment"; (2) "Technology, Production, Distribution & Consumption"; (3) "Cultures, Continuity, and Change"; (4)…

Development and Implementation of Culturally Tailored Offline Mobile Health Surveys.

PubMed

McIntosh, Scott; Pérez-Ramos, José; Demment, Margaret M; Vélez Vega, Carmen; Avendaño, Esteban; Ossip, Deborah J; Dye, Timothy D

2016-06-02

In low and middle income countries (LMICs), and other areas with low resources and unreliable access to the Internet, understanding the emerging best practices for the implementation of new mobile health (mHealth) technologies is needed for efficient and secure data management and for informing public health researchers. Innovations in mHealth technology can improve on previous methods, and dissemination of project development details and lessons learned during implementation are needed to provide lessons learned to stakeholders in both the United States and LMIC settings. The aims of this paper are to share implementation strategies and lessons learned from the development and implementation stages of two survey research projects using offline mobile technology, and to inform and prepare public health researchers and practitioners to implement new mobile technologies in survey research projects in LMICs. In 2015, two survey research projects were developed and piloted in Puerto Rico and pre-tested in Costa Rica to collect face-to-face data, get formative evaluation feedback, and to test the feasibility of an offline mobile data collection process. Fieldwork in each setting involved survey development, back translation with cultural tailoring, ethical review and approvals, data collector training, and piloting survey implementation on mobile tablets. Critical processes and workflows for survey research projects in low resource settings were identified and implemented. This included developing a secure mobile data platform tailored to each survey, establishing user accessibility, and training and eliciting feedback from data collectors and on-site LMIC project partners. Formative and process evaluation strategies are necessary and useful for the development and implementation of survey research projects using emerging mHealth technologies in LMICs and other low resource settings. Lessons learned include: (1) plan institutional review board (IRB) approvals in multiple countries carefully to allow for development, implementation, and feedback, (2) in addition to testing the content of survey instruments, allow time and consideration for testing the use of novel mHealth technology (hardware and software), (3) incorporate training for and feedback from project staff, LMIC partner staff, and research participants, and (4) change methods accordingly, including content, as mHealth technology usage influences and is influenced by the content and structure of the survey instrument. Lessons learned from early phases of LMIC research projects using emerging mHealth technologies are critical for informing subsequent research methods and study designs.

XML technology planning database : lessons learned

NASA Technical Reports Server (NTRS)

Some, Raphael R.; Neff, Jon M.

2005-01-01

A hierarchical Extensible Markup Language(XML) database called XCALIBR (XML Analysis LIBRary) has been developed by Millennium Program to assist in technology investment (ROI) analysis and technology Language Capability the New return on portfolio optimization. The database contains mission requirements and technology capabilities, which are related by use of an XML dictionary. The XML dictionary codifies a standardized taxonomy for space missions, systems, subsystems and technologies. In addition to being used for ROI analysis, the database is being examined for use in project planning, tracking and documentation. During the past year, the database has moved from development into alpha testing. This paper describes the lessons learned during construction and testing of the prototype database and the motivation for moving from an XML taxonomy to a standard XML-based ontology.

ICT & Learning in Chilean Schools: Lessons Learned

ERIC Educational Resources Information Center

Sanchez, Jaime; Salinas, Alvaro

2008-01-01

By the early nineties a Chilean network on computers and education for public schools had emerged. There were both high expectancies that technology could revolutionize education as well as divergent voices that doubted the real impact of technology on learning. This paper presents an evaluation of the Enlaces network, a national Information and…

Proceedings of Selected Research and Development Presentations at the 1997 National Convention of the Association for Educational Communications and Technology Sponsored by the Research and Theory Division (19th, Albuquerque, NM, February 14-18, 1997).

ERIC Educational Resources Information Center

Abel, Omalley, Ed.; And Others

1997-01-01

This proceedings volume contains 57 papers. Subjects addressed include: cooperative technology education; children's learning strategies with hypermedia lessons; problem-based learning; instructional methodologies for lifelong learning; interactive television (ITV) design; theoretical bases for Human Performance Technology (HPT); use of cognitive…

1000 days on orbit: lessons learned from the ACTEX-I flight experiment

NASA Astrophysics Data System (ADS)

Erwin, R. Scott; Denoyer, Keith K.

2000-06-01

This paper presents a review of the Air Force Research Laboratory advanced controls technology experiment program. Representing the first space-demonstration of smart structures technology, the ACTEX-I program has met or exceeded all program goals at each stage, beginning with the program initiation in 1991 through launch in 1996 to the conclusion of the Guest Investigator program and program conclusion in 1999. This paper will provide a summary of the ACTEX-I program from the AFRL perspective, focusing on lessons learned from the program both positive and negative.

The Effect of Cooperative Learning on Students' Achievement and Views on the Science and Technology Course

ERIC Educational Resources Information Center

Altun, Sertel

2015-01-01

The purpose of this study is to investigate the efficiency of learning plan implementation prepared with the cooperative learning method. In particular, the study addresses the effect of cooperative learning on students' achievement and their views regarding the "Systems in Our Body" unit of the 6th grade Science and Technology lesson.…

Enacting Key Skills-Based Curricula in Secondary Education: Lessons from a Technology-Mediated, Group-Based Learning Initiative

ERIC Educational Resources Information Center

Johnston, Keith; Conneely, Claire; Murchan, Damian; Tangney, Brendan

2015-01-01

Bridge21 is an innovative approach to learning for secondary education that was originally conceptualised as part of a social outreach intervention in the authors' third-level institution whereby participants attended workshops at a dedicated learning space on campus focusing on a particular model of technology-mediated group-based learning. This…

Drafting. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials for drafting for students in grades 6-10 consists of an instructor's section and student materials. The instructor's section contains background information, suggested activities, and a list of suggested resources. A lesson plan for the 8-day module includes assignments; equipment, tools,…

Residential Construction. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This packet of technology learning activity (TLA) materials for residential construction for students in grades 6-10 consists of an instructor's section and student materials. The instructor's section contains background information, suggested activities, and a list of suggested resources. A lesson plan for the 10-day module includes assignments;…

To Customize or Not to Customize? Exploring Science Teacher Customization in an Online Lesson Portal

ERIC Educational Resources Information Center

Littenberg-Tobias, Joshua; Beheshti, Elham; Staudt, Carolyn

2016-01-01

New technologies are increasingly giving science teachers the ability to access and customize science lessons. However, there is substantial debate in the literature about whether and under what conditions teacher customization benefit student learning. In this study, we examined teacher customization of inquiry-based science lessons from an…

Training Teachers to Use Technology and Inquiry-based Learning Practices in the Geosciences through an Industry-University Partnership

NASA Astrophysics Data System (ADS)

McNeal, K.; Buell, R.; Eiland, L.

2009-12-01

Teacher professional development centered about the Geosciences is necessary in order to train K-12 teachers about this science field and to effectively educate K-12 students about Earth processes. The partnership of industries, universities, and K-12 schools is a collaborative pathway to support these efforts by providing teachers access to technology, inquiry-based learning, and authentic field experiences within the Geosciences context. This research presents the results of Project SMARTER (Science and Mathematics Advancement and Reform utilizing Technology and Enhanced Resources), a co-lead industry-university partnership and teacher professional development workshop program that focused on technology and inquiry-based learning in the Geosciences. The workshop included fifteen teachers from five distressed counties in Mississippi as defined by the Appalachian Regional Commission. Three (one science, once math, one technology) 7-12 grade teachers were selected from each school district and worked together during activities as a team to foster a cooperative learning experience. The two week workshop trained teachers on the use of a variety of technologies including: Vernier Probes and software, TI-calculators and presenter, Mimio Boards, GPS receivers, Google Earth, Excel, PowerPoint, projectors, and the use of historic geologic datasets. Furthermore, teachers were trained on proper field collection techniques, the use of Hach Kits and field probes, and the interpretation of geologic data. Each daily program incorporated the use of technology-rich and inquiry-based activities into one of the five Earth spheres: atmosphere, lithosphere, biosphere, hydrosphere, and anthrosphere. Results from the pre-post technology attitude survey showed that participating teachers significantly (p < 0.05) increased their confidence level in using technology. Furthermore, all participants self-reflected that the workshop both increased their interest in the Geosciences and their plans to integrate technology in future classroom activities. Qualitative responses from daily feedback forms and journal entries indicated that participating teachers were enthusiastic about inquiry-, technology-, and field-based learning activities and were willing to incorporate cross-discipline lesson plans. Evaluation of final lesson plans developed by the teachers during the workshop combined with follow-up classroom visits illustrated that the teachers appropriately developed classroom lessons to incorporate inquiry and technology and that they successfully implemented these lesson plans in their own classroom as a direct result of participating in workshop activities.

SOCAP: Lessons learned in applying SIPE-2 to the military operations crisis action planning domain

NASA Technical Reports Server (NTRS)

Desimone, Roberto

1992-01-01

This report describes work funded under the DARPA Planning and Scheduling Initiative that led to the development of SOCAP (System for Operations Crisis Action Planning). In particular, it describes lessons learned in applying SIPE-2, the underlying AI planning technology within SOCAP, to the domain of military operations deliberate and crisis action planning. SOCAP was demonstrated at the U.S. Central Command and at the Pentagon in early 1992. A more detailed report about the lessons learned is currently being prepared. This report was presented during one of the panel discussions on 'The Relevance of Scheduling to AI Planning Systems.'

Lessons Learned, Innovative Practices, and Emerging Trends: Technology for Teacher Education and Professional Development

ERIC Educational Resources Information Center

Donohue, Chip; Fox, Selena

2012-01-01

Since 1999, the authors have written numerous articles and books, given hundreds of presentations, served on national eLearning groups, and created new international online programs, all while paying careful attention to the trends, issues, and best practices in the effective use of technology tools and distance learning methods. In this article,…

Guiding the Design of Lessons by Using the MAPLET Framework: Matching Aims, Processes, Learner Expertise and Technologies

ERIC Educational Resources Information Center

Ifenthaler, Dirk; Gosper, Maree

2014-01-01

This paper introduces the MAPLET framework that was developed to map and link teaching aims, learning processes, learner expertise and technologies. An experimental study with 65 participants is reported to test the effectiveness of the framework as a guide to the design of lessons embedded within larger units of study. The findings indicate the…

The NASA "Why?" Files: The Case of the "Wright" Invention. A Lesson Guide with Activities in Mathematics, Science, and Technology.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

This lesson guide for instruction of students in grades 3-5 contains activities in mathematics, science, and technology. The NASA "Why?" Files is a series of instructional programs consisting of broadcast, print, and online elements. Emphasizing standards-based instruction, Problem-Based Learning, and science as inquiry, the series seeks to…

Design and Validation of MAPS for Educators: A Performance Support System to Guide Media Selection for Lesson Design

ERIC Educational Resources Information Center

Hung, Wei-Chen; Kalota, Faisal

2013-01-01

The importance of adopting technology-supported performance systems for on-the-job learning and training is well-recognized in a networked economy. In this study, we present a performance support system (PSS) designed to support technology integration for lesson design. The goal is to support educators in the development of appropriate and…

VirSchool: The Effect of Background Music and Immersive Display Systems on Memory for Facts Learned in an Educational Virtual Environment

ERIC Educational Resources Information Center

Fassbender, Eric; Richards, Deborah; Bilgin, Ayse; Thompson, William Forde; Heiden, Wolfgang

2012-01-01

Game technology has been widely used for educational applications, however, despite the common use of background music in games, its effect on learning has been largely unexplored. This paper discusses how music played in the background of a computer-animated history lesson affected participants' memory for facts. A virtual history lesson was…

1:1 Mobile Inquiry Learning Experience for Primary Science Students--A Study of Learning Effectiveness

ERIC Educational Resources Information Center

Looi, C.-K.; Zhang, B.; Chen, W.; Seow, P.; Chia, G.; Norris, C.; Soloway, E.

2011-01-01

This paper presents the findings of a research project in which we transformed a primary (grade) 3 science curriculum for delivery via mobile technologies, and a teacher enacted the lessons over the 2009 academic year in a class in a primary school in Singapore. The students had a total of 21 weeks of the mobilized lessons in science, which were…

Students' Experiences with and Preferences for Using Information Technology in Music Learning in Shanghai's Secondary Schools

ERIC Educational Resources Information Center

Ho, Wai-Chung

2007-01-01

This study explores the centrality of information technology (IT) to Chinese students' experiences in music lessons. Students involved in this qualitative and quantitative study described the possibilities of using technology when learning music. From among the students of 15 Shanghai secondary schools, 1741 responded to a written questionnaire…

Making Sense of Extraneous Solutions

ERIC Educational Resources Information Center

Zelkowski, Jeremy S.

2013-01-01

Principles and Standards for School Mathematics (NCTM 2000) states, "Technology is essential in teaching and learning mathematics; it influences the mathematics that is taught and enhances students' learning." The focus on reasoning and sense making with technology in the lesson presented in this article will enable students to do more…

The Role of Photoblogs in Social Studies Classroom: Learning about the People of the Civil War

ERIC Educational Resources Information Center

Barrow, Elizabeth; Anderson, Janice; Horner, Martinette

2017-01-01

Using the of Humans of New York photoblog concept, the exemplar lesson plan described in this article incorporated technology and the replacement, amplification, and transformation framework to modify a traditional social studies lesson on the American Civil War into an engaging and inquiry-based lesson. Students researched individuals who lived…

USMC Ground Surveillance Robot (GSR): Lessons Learned

NASA Astrophysics Data System (ADS)

Harmon, S. Y.

1987-02-01

This paper describes the design of an autonomous vehicle and the lessons learned during the implementation of that complex robot. The major problems encountered to which solutions were found include sensor processing bandwidth limitations, coordination of the interactions between major subsystems, sensor data fusion and system knowledge representation. Those problems remaining unresolved include system complexity management, the lack of powerful system monitoring and debugging tools, exploratory implementation of a complex system and safety and testing issues. Many of these problems arose from working with underdeveloped and continuously evolving technology and will probably be resolved as the technological resources mature and stabilize. Unfortunately, other problems will continue to plague developers throughout the evolution of autonomous system technology.

Motivating Instructors through Innovative Technology and Pedagogy

ERIC Educational Resources Information Center

Weber, Nicole L.; Barth, Dylan J.

2016-01-01

Members of the UWM CETL online and blended faculty development team share innovative technological and pedagogical strategies that they currently utilize to motivate and assist instructors in developing courses for the online or blended environments, and they discuss the lessons learned from incorporating active learning, open content, bring your…

Neuroeducational Research in the Design and Use of a Learning Technology

ERIC Educational Resources Information Center

Howard-Jones, Paul; Holmes, Wayne; Demetriou, Skevi; Jones, Carol; Tanimoto, Eriko; Morgan, Owen; Perkins, David; Davies, Neil

2015-01-01

Many have warned against a direct "brain scan to lesson plan" approach when attempting to transfer insights from neuroscience to the classroom. Similarly, in the effective design and implementation of learning technology, a judicious interrelation of insights associated with diverse theoretical perspectives (e.g., neuroscientific,…

Training for New Manufacturing Technologies.

ERIC Educational Resources Information Center

Jacobs, James

1988-01-01

Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

Your Place or Mine? Navigating a Technology Collaborative.

ERIC Educational Resources Information Center

Wepner, Shelley B.

1998-01-01

Describes the Teaching and Learning Collaborative (TLC) in Technology, which prepared preservice teachers to incorporate technology into lesson plans and supported inservice teachers' professional development with technology, offering a professional-development course, seminar sessions, and e-mail communication. Evaluation indicated that…

Lessons learned using Web conference technology for online focus group interviews.

PubMed

Tuttas, Carol A

2015-01-01

Researchers use Internet technology for data collection in qualitative studies. In the literature there are published accounts of synchronous (real-time) and more commonly, asynchronous (not-real-time) focus group data collection methods supported by Internet technology in the form of email correspondence, LISTSERVs, discussion boards, and chat rooms. Real-time audiovisual Web conference technology offers qualitative researchers a promising alternative means to carry out focus groups. In this methodological article I describe how I used Web conference technology to host online focus groups for a qualitative study about job integration experiences of travel nurses geographically dispersed across the United States. I describe lessons learned from the use of this innovative method for qualitative data collection, including a brief overview about the use of dictation software for transcription. This new knowledge is useful to researchers considering Web conference technology to carry out focus group data collection in qualitative research. © The Author(s) 2014.

Learning, Engagement, and Technology: Middle School Students' Three-Year Experience in Pervasive Technology Environments in South Korea

ERIC Educational Resources Information Center

Hur, Jung Won; Oh, Jaekyeon

2012-01-01

This study explored an initiative that created a pervasive learning environment in a middle school in South Korea and examined its impact on student academic achievement and learning engagement. Forty students received a laptop to use for class projects, online collaboration, and lesson reviews over a 3-year period. To measure the effect of laptop…

US EPA's UV Disinfection Technologies Demonstration Study - States Briefing

EPA Science Inventory

EPA report and anticipated Journal articles will provide recommendations & guidance based on lessons learned for subsequent UV technology testing and monitoring/control applications of virus inactivation in drinking water.

WISE Science: Web-based Inquiry in the Classroom. Technology, Education--Connections

ERIC Educational Resources Information Center

Slotta, James D.; Linn, Marcia C.

2009-01-01

This book shares the lessons learned by a large community of educational researchers and science teachers as they designed, developed, and investigated a new technology-enhanced learning environment known as WISE: The Web-Based Inquiry Science Environment. WISE offers a collection of free, customizable curriculum projects on topics central to the…

Preparing Lessons, Exercises and Tests for M-Learning of IT Fundamentals

ERIC Educational Resources Information Center

Djenic, S.; Vasiljevic, V.; Mitic, J.; Petkovic, V.; Miletic, A.

2014-01-01

This paper represents a result of studying the efficiency of applying mobile learning technologies, as well as the accompanying advanced teaching methods in the area of Information Technologies, at the School of Electrical and Computer Engineering of Applied Studies in Belgrade, Serbia. It contains a brief description of the form of application…

Information Technologies in Higher Education: Lessons Learned in Industrial Engineering

ERIC Educational Resources Information Center

Delgado-Almonte, Milagros; Andreu, Hernando Bustos; Pedraja-Rejas, Liliana

2010-01-01

This article describes a teaching experience in which information and communication technologies were applied in five industrial engineering courses at the Universidad de Tarapaca in Chile. The paper compares the performance and course pass rates of the e-learning platform and portable pocket PC platform with those of the same courses teaching in…

Illustrating Challenges and Practicing Competencies for Global Technology-Assisted Collaboration: Lessons from a Real-Time North-South Teaching Collaboration

ERIC Educational Resources Information Center

Capobianco, Stephen; Rubaii, Nadia; Líppez-De Castro, Sebastian

2016-01-01

In this paper, we outline the structure, goals, and lessons from our international teaching and learning collaboration in the spring 2015 semester. We took two public affairs courses with students in a U.S. and a Colombian university and combined them into a single hybrid course with the use of technology. The main goals of the course were to…

JR Live: Lessons Learned from Ship-to-Shore Interactions with the JOIDES Resolution

NASA Astrophysics Data System (ADS)

Cooper, S. K.

2016-02-01

Live ship-to-shore events have been conducted regularly from the International Ocean Discovery Program (IODP) research vessel JOIDES Resolution since 2009. These 45-minute events have reached thousands of students, educators and members of the general public with the JR's cutting edge science and technology and the excitement of discovery, science process and careers. Conducted by trained on-board Education/Outreach Officers on board the JR's two-month expeditions, the programs vary over time and have evolved with available technology. Each event incorporates collaboration between the Education Officer, scientists who are a part of the expedition science party, and requests from shore-side audiences. These collaborations have been successful in igniting interest among students and educators, providing scientists with outreach experiences and in meeting education standards and goals. Over the past six years, many lessons have been learned about procedures, technology, content, follow-up and impact. This session will share some of these lessons, identify opportunities for collaboration and engagement, and explore growth opportunities and directions.

Utilizing Virtual and Personal Learning Environments for Optimal Learning

ERIC Educational Resources Information Center

Terry, Krista, Ed.; Cheney, Amy, Ed.

2016-01-01

The integration of emerging technologies in higher education presents a new set of challenges and opportunities for educators. With a growing need for customized lesson plans in online education, educators are rethinking the design and development of their learning environments. "Utilizing Virtual and Personal Learning Environments for…

Topics on Distance Learning: Proceedings 2000 (Hammond, Indiana, June 6-7, 2000).

ERIC Educational Resources Information Center

Purdue Univ., Hammond, IN. Calumet Campus.

This proceedings of the 2000 Topics on Distance Learning conference contains summaries of the following presentations: "The ABC's of Distance Learning via Full Motion Video" (Liz Owens); "Assessing the Cost of Technology in Instruction Using an Economic Model" (Joseph Lovrinic); "Collaboration Lessons Learned from the…

Longitudinal Study: Efficacy of Online Technology Tools for Instructional Use

NASA Technical Reports Server (NTRS)

Uenking, Michael D.

2011-01-01

Studies show that the student population (secondary and post secondary) is becoming increasingly more technologically savvy. Use of the internet, computers, MP3 players, and other technologies along with online gaming has increased tremendously amongst this population such that it is creating an apparent paradigm shift in the learning modalities of these students. Instructors and facilitators of learning can no longer rely solely on traditional lecture-based lesson formals. In order to achieve student academic success and satisfaction and to increase student retention, instructors must embrace various technology tools that are available and employ them in their lessons. A longitudinal study (January 2009-June 2010) has been performed that encompasses the use of several technology tools in an instructional setting. The study provides further evidence that students not only like the tools that are being used, but prefer that these tools be used to help supplement and enhance instruction.

Designing and Integrating Reusable Learning Objects for Meaningful Learning: Cases from a Graduate Programme

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling

2017-01-01

E-learning quality depends on sound pedagogical integration between the content resources and lesson activities within an e-learning system. This study proposes that a meaningful learning with technology framework can be used to guide the design and integration of content resources with e-learning activities in ways that promote learning…

Operational Lessons Learned During Bioreactor Demonstrations for Acid Rock Drainage Treatment

EPA Science Inventory

The U.S. Environmental Protection Agency’s Mine Waste Technology Program (MWTP) has emphasized the development of biologically-based treatment technologies for acid rock drainage (ARD). Progressively evolving technology demonstrations have resulted in significant advances in sul...

ENVIRONMENTAL TECHNOLOGY VERIFICATION: CREDIBLE PERFORMANCE DATA FOR TECHNOLOGY USERS

EPA Science Inventory

The paper summarizes accomplishments of EPA's Environmental Technology Verification (ETV) Program, discusses lessons learned during the pilot period, briefly notes the restructuring of the pilot programs into six centers beginning in late 2000, and discusses in detail the Air Pol...

Bringing Engineering Research Coupled With Art Into The K-12 Classroom

NASA Astrophysics Data System (ADS)

Cola, J.

2016-12-01

The Partnerships for Research, Innovation and Multi-Scale Engineering Program, a Research Experiences for K-12 Teachers at Georgia Institute of Technology demonstrates a successful program that blends the fine arts with engineering research. Teachers selected for the program improve their science and engineering content knowledge, as well as their understanding of how to use STEAM to increase student comprehension and engagement. Participants in the program designed Science, Technology, Engineering, Art, and Mathematics (STEAM)- based lessons based on faculty engineering research. Examples of some STEAM lessons created will be discussed along with lessons learned.

Adaptative Peer to Peer Data Sharing for Technology Enhanced Learning

NASA Astrophysics Data System (ADS)

Angelaccio, Michele; Buttarazzi, Berta

Starting from the hypothesis that P2P Data Sharing in a direct teaching scenario (e.g.: a classroom lesson) may lead to relevant benefits, this paper explores the features of EduSHARE a Collaborative Learning System useful for Enhanced Learning Process.

Conditions for Learning: Part 3

ERIC Educational Resources Information Center

Andrews, Paul; Sayers, Judy

2006-01-01

In this article, the authors compare texts, times, technologies, and trails in mathematics lessons in five European countries (Flanders, England, Finland, Hungary and Spain). They start by discussing the provision and use of textbooks. After this they discuss lesson lengths and their impact on learners. They consider the extent of technology…

TPACK in Special Education: Preservice Teacher Decision Making While Integrating Ipads into Instruction

ERIC Educational Resources Information Center

Anderson, Susan; Griffith, Robin; Crawford, Lindy

2017-01-01

This study provides insight into preservice teachers' experiences with integrating technology into lessons with children who had mild learning disabilities. Participants included 14 junior early childhood education majors enrolled in a special education course with a fieldwork component. The researchers collected and analyzed lesson plans, journal…

Learning Gains and Response to Digital Lessons on Soil Genesis and Development

USDA-ARS?s Scientific Manuscript database

Evolving computer technology offers opportunities for new online approaches in teaching methods and delivery. Well-designed online lessons should reinforce the critical need of the soil science discipline in today’s food, energy, and environmental issues, as well as meet the needs of the diverse cli...

Technology to Support Parental Engagement in Elementary Education: Lessons Learned from the UK

ERIC Educational Resources Information Center

Lewin, Cathy; Luckin, Rosemary

2010-01-01

This paper compares and contrasts two projects in order to better understand the complex issues surrounding the use of technology to support parental involvement with schools and their children's learning. The Becta-funded ICT Test Bed evaluation (2002-2006) had the intention of saturating schools (in three areas of social deprivation) with a…

Education, Technology and the Sociological Imagination--Lessons to Be Learned from C. Wright Mills

ERIC Educational Resources Information Center

Selwyn, Neil

2017-01-01

As part of the "Learning, Media & Technology" series on "Key Thinkers and Theoretical Traditions", this paper explores the relevance of C. Wright Mills' much lauded book "The Sociological Imagination". The argument is made that we would do well to take heed of many of the central tenets of Mills' call to arms for…

The Video Game Debate--Bad for Behaviour, Good for Learning? Lessons in Learning

ERIC Educational Resources Information Center

Canadian Council on Learning, 2009

2009-01-01

In 2001, the Canadian Education Association concluded that "technology has become an accepted fact of life and education." Nearly a decade later, digital technologies continue to evolve rapidly and video games are no exception. While the popularity of video games among children is undeniable, the debate about the risks and benefits of…

Issues Involved in Attempting to Develop Independent Learning in Pupils Working on Technological Projects

ERIC Educational Resources Information Center

Barak, Moshe

2004-01-01

This research addresses the impact of technological projects at high school on pupils' learning. The participants were sixty low-mid achieving pupils who worked for one year on final projects for matriculation exams. Data were collected through observations of laboratory lessons, interviews with pupils and teachers, and analysis of pupils'…

Analysis and lessons learned instituting an instant messaging reference service at an academic health sciences library: the first year.

PubMed

Kipnis, Daniel G; Kaplan, Gary E

2008-01-01

In February 2006, Thomas Jefferson University went live with a new instant messaging (IM) service. This paper reviews the first 102 transcripts to examine question types and usage patterns. In addition, the paper highlights lessons learned in instituting the service. IM reference represents a small proportion of reference questions, but based on user feedback and technological improvements, the library has decided to continue the service.

Crystalline-silicon reliability lessons for thin-film modules

NASA Technical Reports Server (NTRS)

Ross, Ronald G., Jr.

1985-01-01

Key reliability and engineering lessons learned from the 10-year history of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project are presented and analyzed. Particular emphasis is placed on lessons applicable to the evolving new thin-film cell and module technologies and the organizations involved with these technologies. The user-specific demand for reliability is a strong function of the application, its location, and its expected duration. Lessons relative to effective means of specifying reliability are described, and commonly used test requirements are assessed from the standpoint of which are the most troublesome to pass, and which correlate best with field experience. Module design lessons are also summarized, including the significance of the most frequently encountered failure mechanisms and the role of encapsulant and cell reliability in determining module reliability. Lessons pertaining to research, design, and test approaches include the historical role and usefulness of qualification tests and field tests.

PV Reliability Development Lessons from JPL's Flat Plate Solar Array Project

NASA Technical Reports Server (NTRS)

Ross, Ronald G., Jr.

2013-01-01

Key reliability and engineering lessons learned from the 20-year history of the Jet Propulsion Laboratory's Flat-Plate Solar Array Project and thin film module reliability research activities are presented and analyzed. Particular emphasis is placed on lessons applicable to evolving new module technologies and the organizations involved with these technologies. The user-specific demand for reliability is a strong function of the application, its location, and its expected duration. Lessons relative to effective means of specifying reliability are described, and commonly used test requirements are assessed from the standpoint of which are the most troublesome to pass, and which correlate best with field experience. Module design lessons are also summarized, including the significance of the most frequently encountered failure mechanisms and the role of encapsulate and cell reliability in determining module reliability. Lessons pertaining to research, design, and test approaches include the historical role and usefulness of qualification tests and field tests.

VERIFYING CLEANER TECHNOLOGIES WITH EPA'S ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

The US EPA's Office of Research and Development Environmental Technology Verification (ETV) Program completed its five-year pilot period in 2001. Now in 2002 lessons learned in the pilot period are being incorporated seamlessly into six operating ETV Centers which cover technolo...

The CICT Earth Science Systems Analysis Model

NASA Technical Reports Server (NTRS)

Pell, Barney; Coughlan, Joe; Biegel, Bryan; Stevens, Ken; Hansson, Othar; Hayes, Jordan

2004-01-01

Contents include the following: Computing Information and Communications Technology (CICT) Systems Analysis. Our modeling approach: a 3-part schematic investment model of technology change, impact assessment and prioritization. A whirlwind tour of our model. Lessons learned.

Transforming Lessons with Technology

ERIC Educational Resources Information Center

Currie, Brad

2016-01-01

Using a fictitious learning environment, the author demonstrates a variety of technological tools that teachers can infuse into their classrooms. Come away with some innovative, practical methods to help students show what they know about the topic at hand.

A Framework for Adaptive Learning Design in a Web-Conferencing Environment

ERIC Educational Resources Information Center

Bower, Matt

2016-01-01

Many recent technologies provide the ability to dynamically adjust the interface depending on the emerging cognitive and collaborative needs of the learning episode. This means that educators can adaptively re-design the learning environment during the lesson, rather than purely relying on preemptive learning design thinking. Based on a…

Standardization Documents

DTIC Science & Technology

2011-08-01

Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

The Advanced Communications Technology Satellite - Performance, Reliability and Lessons Learned

NASA Technical Reports Server (NTRS)

Krawczyk, Richard J.; Ignaczak, Louis R.

2000-01-01

The Advanced Communications Satellite (ACTS) was conceived and developed in the mid- 1980s as an experimental satellite to demonstrate unproven Ka-band technology, and potential new commercial applications and services. Since launch into geostationary orbit in September 1993. ACTS has accumulated almost seven years of essentially trouble-free operation and met all program objectives. The unique technology, service experiments. and system level demonstrations accomplished by ACTS have been reported in many forums over the past several years. As ACTS completes its final experiments activity, this paper will relate the top-level program goals that have been achieved in the design, operation, and performance of the particular satellite subsystems. Pre-launch decisions to ensure satellite reliability and the subsequent operational experiences contribute to lessons learned that may be applicable to other comsat programs.

Technology Leadership Preparedness: Principals' Perceptions

ERIC Educational Resources Information Center

Metcalf, Wendy; LaFrance, Jason

2013-01-01

Adopting technology in the K-12 classroom is evolving from adapting lessons that highlight a technology to pervasive use of interactive and handheld devices. In this environment, school leaders have the complex task of incorporating technologies to enhance teaching and learning. The purpose of this quasi-experimental quantitative study was to…

The Historical Development of Vaccine Technology: Exploring the Relationship between Science and Technology

ERIC Educational Resources Information Center

Lee, Yeung Chung; Kwok, Ping Wai

2017-01-01

This paper examines the feasibility of using historical case studies to contextualise the learning of the nature of science and technology in a biology lesson. Through exploring the historical development of vaccine technology, students were expected to understand the complexity of the relationships between technology and science beyond the…

Reconstructing High School Chemical Reaction Lessons to Motivate and Support Conceptual Learning

NASA Astrophysics Data System (ADS)

Ndiforamang, Nathan Moma

The primary focus of this education leadership portfolio is to reconstruct lessons on chemical reaction concepts for teachers to use and reach all learners of chemistry in Cecil County Public Schools. As a high school chemistry teacher, I have observed that student enrollment in chemistry is relatively low, and students show little enthusiasm about being successful in chemistry compared to other science subjects. To understand these issues, I researched conceptual learning, misconceptions, and best practices; prepared open-ended questions in a survey for chemistry teachers in my district; distributed the survey; received their responses; and processed the information received. I analyzed the data using qualitative techniques, and the results revealed that many of the tools provided in the district's curriculum guide for chemistry were not effective in class. I used the data to search for learning tools and classroom resources that could improve students understanding of chemistry concepts. I then reconstructed eight lessons on chemical reaction concepts utilizing those tools and resources. I redistributed the reconstructed lessons to teachers who had volunteered to review the lessons and provide professional feedback. The teachers' feedback revealed that the tools and resources incorporated in the reconstructed lessons included interactive activities that would excite students. The teachers indicated that the lessons were technology rich and included a variety of learning strategies. They also noted that the lessons included too many activities to cover within a day's lesson, and some of the recommended weblinks had technical issues. Most of the suggestions received were used to improve the quality of the reconstructed lessons and will serve as a resource for future fine-tuning of the lessons.

Lessons Learned: Transfer of the High-Definition Circulating Tumor Cell Assay Platform to Development as a Commercialized Clinical Assay Platform.

PubMed

Kuhn, P; Keating, S M; Baxter, G T; Thomas, K; Kolatkar, A; Sigman, C C

2017-11-01

Planning and transfer of a new technology platform developed in an academic setting to a start-up company for medical diagnostic product development may appear daunting and costly in terms of complexity, time, and resources. In this review we outline the key steps taken and lessons learned when a technology platform developed in an academic setting was transferred to a start-up company for medical diagnostic product development in the interest of elucidating development toolkits for academic groups and small start-up companies starting on the path to commercialization and regulatory approval. © 2017, The American Society for Clinical Pharmacology and Therapeutics.

76 FR 76393 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

..., including through the use of information technology. Dated: December 2, 2011. Darrin King, Director... Collection: 21st Century Community Learning Centers: Lessons Learned Guides. OMB Control Number: 1875--NEW... Community Learning Centers (21st CCLC) program that will assist the U.S. Department of Education staff in...

CD-ROM Integration Peaks Student Interest in Inquiry.

ERIC Educational Resources Information Center

O'Bannon, Blanche

1997-01-01

Discussion of learning processes examines past educational practices and considers how CD-ROM technology can impact teaching and learning. A lesson plan for elementary school science that uses a CD-ROM encyclopedia is presented that includes instructional goals, performance objectives, teaching and learning activities, and assessment methods.…

Faculty Development: A Stage Model Matched to Blended Learning Maturation

ERIC Educational Resources Information Center

Fetters, Michael L.; Duby, Tova Garcia

2011-01-01

Faculty development programs are critical to the implementation and support of curriculum innovation. In this case study, the authors present lessons learned from ten years of experience in faculty development programs created to support innovation in technology enhanced learning. Stages of curriculum innovation are matched to stages of faculty…

Community Learning Is Community Development.

ERIC Educational Resources Information Center

Plested, Julian; Dale, Lesley

2001-01-01

A British project to develop a learning community had to overcome challenges of trust, lack of participation by young men, and the tendency to be led by funding. Project lessons include the following: community learning is community development; providers are co-learners; and information technology is an inspirer and an equalizer. (SK)

Sustainability Through Technology Licensing and Commercialization: Lessons Learned from the TRIAD Project

PubMed Central

Payne, Philip R.O.

2014-01-01

Ongoing transformation relative to the funding climate for healthcare research programs housed in academic and non-profit research organizations has led to a new (or renewed) emphasis on the pursuit of non-traditional sustainability models. This need is often particularly acute in the context of data management and sharing infrastructure that is developed under the auspices of such research initiatives. One option for achieving sustainability of such data management and sharing infrastructure is the pursuit of technology licensing and commercialization, in an effort to establish public-private or equivalent partnerships that sustain and even expand upon the development and dissemination of research-oriented data management and sharing technologies. However, the critical success factors for technology licensing and commercialization efforts are often unknown to individuals outside of the private sector, thus making this type of endeavor challenging to investigators in academic and non-profit settings. In response to such a gap in knowledge, this article will review a number of generalizable lessons learned from an effort undertaken at The Ohio State University to commercialize a prototypical research-oriented data management and sharing infrastructure, known as the Translational Research Informatics and Data Management (TRIAD) Grid. It is important to note that the specific emphasis of these lessons learned is on the early stages of moving a technology from the research setting into a private-sector entity and as such are particularly relevant to academic investigators interested in pursuing such activities. PMID:25848609

First Spacelab mission status and lessons learned

NASA Technical Reports Server (NTRS)

Craft, H. G., Jr.; Smith, M. J.; Mullinger, D.

1982-01-01

There are 38 experiments and/or facilities currently under development, or undergoing testing, which will be incorporated into Spacelab for its first mission. These experiments cover a range of scientific disciplines which includes atmospheric research, life sciences, space plasma research, materials science, and space industrialization technology. In addition to the full development of individual experiments, the final design of the integrated payload and the development of all requisite integration hardware have been accomplished. Attention is given to the project management lessons learned during payload integration development.

Homeland Defense Joint Center for Operational Analysis and Lessons Learned Quarterly Bulletin, Volume 7, Issue 1, December 2004

DTIC Science & Technology

2004-12-01

domestic use of the armed forces. 9Joint Center for Operational Analysis and Lessons Learned (JCOA-LL) Bulletin An almost invisible law In many...enacted a program to increase significantly the role of the armed forces in drug interdiction as part of the Defense Authorization Act for 1989. The...technology, expanded intelligence collection, and the formation of new partnerships are necessary. • Arms control and other multilateral agreements will be

Writing a success story: lessons learned from the Spitzer Space Telescope

NASA Astrophysics Data System (ADS)

Gehrz, R. D.; Roellig, T. L.; Werner, M. W.

2010-08-01

A key to the success of the Spitzer Space Telescope (formerly SIRTF) Mission was a unique management structure that promoted open communication and collaboration among scientific, engineering, and contractor personnel at all levels of the project. This helped us to recruit and maintain the very best people to work on Spitzer. We describe the management concept that led to the success of the mission. Specific examples of how the project benefited from the communication and reporting structure, and lessons learned about technology are described.

Lessons Learned while Exploring Cloud-Native Architectures for NASA EOSDIS Applications and Systems

NASA Technical Reports Server (NTRS)

Pilone, Dan

2016-01-01

As new, high data rate missions begin collecting data, the NASAs Earth Observing System Data and Information System (EOSDIS) archive is projected to grow roughly 20x to over 300PBs by 2025. To prepare for the dramatic increase in data and enable broad scientific inquiry into larger time series and datasets, NASA has been exploring the impact of applying cloud technologies throughout EOSDIS. In this talk we will provide an overview of NASAs prototyping and lessons learned in applying cloud architectures.

13th Annual Systems Engineering Conference: Tues- Wed

DTIC Science & Technology

2010-10-28

greater understanding/documentation of lessons learned – Promotes SE within the organization • Justification for continued funding of SE Infrastructure...educational process – Addresses the development of innovative learning tools, strategies, and teacher training • Research and Development – Promotes ...technology, and mathematics • More commitment to engaging young students in science, engineering, technology and mathematics • More rigor in defining

Learning Gains and Response to Digital Lessons on Soil Genesis and Development

ERIC Educational Resources Information Center

Mamo, Martha; Ippolito, James A.; Kettler, Timothy A.; Reuter, Ronald; McCallister, Dennis; Morner, Patricia; Husmann, Dann; Blankenship, Erin

2011-01-01

Evolving computer technology is offering opportunities for new online approaches in teaching methods and delivery. Well-designed web-based (online) lessons should reinforce the critical need of the soil science discipline in today's food, energy, and environmental issues, as well as meet the needs of the diverse clientele with interest in…

Idea Bank: Popular Culture and Video Games as Tools for Music Learning

ERIC Educational Resources Information Center

Reyher, Adam

2014-01-01

The field of music is constantly evolving, and technology is advancing at an unprecedented rate. To increase student interest in what is taught in the music classroom, lessons must invite eager participation. This is accomplished by being innovative with lessons--choosing to incorporate concepts that entice and please students while still…

Preparing Future Teacher Leaders: Lessons from Exemplary School Systems

ERIC Educational Resources Information Center

Schrum, Lynne; Levin, Barbara B.

2013-01-01

In this paper, we argue that teachers have an opportunity to take on leadership roles in technology-rich schools and districts. Based on data collected during a year-long project to investigate award-winning schools and districts, we used observations, interviews and focus groups, and document analysis to glean lessons learned from leaders and…

Enhancing Science Instruction through Student-Created PowerPoint Presentations

ERIC Educational Resources Information Center

Gerido, Leona; Curran, Mary Carla

2014-01-01

Technology use in science classes can enhance lessons and reinforce scientific content. The creation of multimedia projects is a great way to engage students in lessons about estuarine ecosystems. In this activity, students can learn about estuarine organisms and use their creativity to write a story, create artwork, and develop a multimedia…

Herpetologist Transports Third-Graders to Frogland

ERIC Educational Resources Information Center

Matthews, Catherine E.; Cook, Helen M.

2004-01-01

A partnership between a university and a science and technology magnet school brings a renowned herpetologist. Dr. Meg Stewart, to involve third-graders in her studies of coqui frogs. These students prepared to meet this scientist with a series of lesson plans (eight activities and four lab lessons) to learn the anatomy, behavior, and diversity of…

What do K-12 students feel when dealing with technology and engineering issues? Gardner's multiple intelligence theory implications in technology lessons for motivating engineering vocations at Spanish Secondary School

NASA Astrophysics Data System (ADS)

Sánchez-Martín, Jesús; Álvarez-Gragera, García J.; Dávila-Acedo, M. Antonia; Mellado, Vicente

2017-11-01

The interest on engineering and scientific studies can be raised up even from the early years of academic instructional process. This vocation may be linked to emotions and aptitudes towards technological education. Particularly, students get in touch with these technological issues (namely STEM) during the Compulsory Secondary Education in Spain (12-16 years old).This work presents a preliminary evaluation of how relevant is Gardner's multiple intelligence theory (MIT) in the teaching-learning process within the Technology Lessons. In this sense, MIT was considered as an explanation variable of the emotional response within the different educational parts (so-called syllabus units, SU) in the Technology spanish curriculum. Different intelligence style (IS) will orient the student to a vision of the engineering and technology. This work tries to identify which relationships can be established between IS and specific technology and engineering learning. This research involved up to 135 students were subsequently tested about their predominant (IS) and on the emotions that arouse in them when working with each SU. The results were statistically significant and only those with a Logic-arithmetic or Environmental IS were not affected by the SU.Best teaching and learning practicesare required for encouraging further engineering studies.

Blended Course Design for Multi-Campus Technology Instruction: An Expository Study

ERIC Educational Resources Information Center

Thrasher, Evelyn; Coleman, Phillip; Willis, Jeffrey

2014-01-01

This manuscript shares the results of an experimental blended course design that combines online and synchronous technology instruction across four geographically dispersed computer classrooms using ITV technology. Lessons learned include equipment requirements, both in the main classroom and remote classrooms, taking insufficient bandwidth into…

Utilizing the NASA Data-enhanced Investigations for Climate Change Education Resource for Elementary Pre-service Teachers in a Technology Integration Education Course.

NASA Astrophysics Data System (ADS)

Howard, E. M.; Moore, T.; Hale, S. R.; Hayden, L. B.; Johnson, D.

2014-12-01

The preservice teachers enrolled in the EDUC 203 Introduction to Computer Instructional Technology course, primarily for elementary-level had created climate change educational lessons based upon their use of the NASA Data-enhanced Investigations for Climate Change Education (DICCE). NASA climate education datasets and tools were introduced to faculty of Minority Serving Institutions through a grant from the NASA Innovations in Climate Education program. These lessons were developed to study various ocean processes involving phytoplankton's chlorophyll production over time for specific geographic areas using the Giovanni NASA software tool. The pre-service teachers had designed the climate change content that will assist K-4 learners to identify and predict phytoplankton sources attributed to sea surface temperatures, nutrient levels, sunlight, and atmospheric carbon dioxide associated with annual chlorophyll production. From the EDUC 203 course content, the preservice teachers applied the three phases of the technology integration planning (TIP) model in developing their lessons. The Zunal website (http://www.zunal.com) served as a hypermedia tool for online instructional delivery in presenting the climate change content, the NASA climate datasets, and the visualization tools used for the production of elementary learning units. A rubric was developed to assess students' development of their webquests to meet the overall learning objectives and specific climate education objectives. Accompanying each webquest is a rubric with a defined table of criteria, for a teacher to assess students completing each of the required tasks for each lesson. Two primary challenges of technology integration for elementary pre-service teachers were 1) motivating pre-service teachers to be interested in climate education and 2) aligning elementary learning objectives with the Next Generation science standards of climate education that are non-existent in the Common Core State Standards.

The use of high impact practices (HIPs) on chemistry lesson design and implementation by pre-service teachers

NASA Astrophysics Data System (ADS)

Chamrat, Suthida; Apichatyotin, Nattaya; Puakanokhirun, Kittaporn

2018-01-01

The quality of lesson design is essential to learning effectiveness. Research shows some characteristics of lessons have strong effect on learning which were grouped into "High Impact Practices or HIPs. This research aims to examine the use of HIPs on chemistry lesson design as a part of Teaching Science Strand in Chemistry Concepts course. At the first round of lesson design and implementing in classroom, 14 chemistry pre-services teachers freely selected topics, designed and implemented on their own ideas. The lessons have been reflected by instructors and their peers. High Impact Practices were overtly used as the conceptual framework along with the After-Action Review and Reflection (AARR). The selected High Impact practice in this study consisted of 6 elements: well-designed lesson, vary cognitive demand/academic challenge, students center approach, opportunity of students to reflect by discussion or writing, the assignment of project based learning or task, and the lesson reflects pre-service teachers' Technological Pedagogical Content Knowledge (TPACK). The second round, pre-service teachers were encouraged to explicitly used 6 High Impact Practices in cooperated with literature review specified on focused concepts for bettering designed and implemented lessons. The data were collected from 28 lesson plans and 28 classroom observations to compare and discuss between the first and second lesson and implementation. The results indicated that High Impact Practices effect on the quality of delivered lesson. However, there are some elements that vary on changes which were detailed and discussed in this research article.

Technology Integration in a Science Classroom: Preservice Teachers' Perceptions

NASA Astrophysics Data System (ADS)

Rehmat, Abeera P.; Bailey, Janelle M.

2014-12-01

The challenge of preparing students for the information age has prompted administrators to increase technology in the public schools. Yet despite the increased availability of technology in schools, few teachers are integrating technology for instructional purposes. Preservice teachers must be equipped with adequate content knowledge of technology to create an advantageous learning experience in science classrooms. To understand preservice teachers' conceptions of technology integration, this research study explored 15 elementary science methods students' definitions of technology and their attitudes toward incorporating technology into their teaching. The phenomenological study took place in a science methods course that was based on a constructivist approach to teaching and learning science through science activities and class discussions, with an emphasis on a teacher beliefs framework. Data were collected throughout the semester, including an open-ended pre/post-technology integration survey, lesson plans, and reflections on activities conducted throughout the course. Through a qualitative analysis, we identified improvements in students' technology definitions, increased technology incorporation into science lesson plans, and favorable attitudes toward technology integration in science teaching after instruction. This research project demonstrates that positive changes in beliefs and behaviors relating to technology integration in science instruction among preservice teachers are possible through explicit instruction.

Testing Planetary Rovers: Technologies, Perspectives, and Lessons Learned

NASA Technical Reports Server (NTRS)

Thomas, Hans; Lau, Sonie (Technical Monitor)

1998-01-01

Rovers are a vital component of NASA's strategy for manned and unmanned exploration of space. For the past five years, the Intelligent Mechanisms Group at the NASA Ames Research Center has conducted a vigorous program of field testing of rovers from both technology and science team productivity perspective. In this talk, I will give an overview of the the last two years of the test program, focusing on tests conducted in the Painted Desert of Arizona, the Atacama desert in Chile, and on IMG participation in the Mars Pathfinder mission. An overview of autonomy, manipulation, and user interface technologies developed in response to these missions will be presented, and lesson's learned in these missions and their impact on future flight missions will be presented. I will close with some perspectives on how the testing program has affected current rover systems.

Five years of lesson modification to implement non-traditional learning sessions in a traditional-delivery curriculum: A retrospective assessment using applied implementation variables.

PubMed

Gleason, Shaun E; McNair, Bryan; Kiser, Tyree H; Franson, Kari L

Non-traditional learning (NTL), including aspects of self-directed learning (SDL), may address self-awareness development needs. Many factors can impact successful implementation of NTL. To share our multi-year experience with modifications that aim to improve NTL sessions in a traditional curriculum. To improve understanding of applied implementation variables (some of which were based on successful SDL implementation components) that impact NTL. We delivered a single lesson in a traditional-delivery curriculum once annually for five years, varying delivery annually in response to student learning and reaction-to-learning results. At year 5, we compared student learning and reaction-to-learning to applied implementation factors using logistic regression. Higher instructor involvement and overall NTL levels predicted correct exam responses (p=0.0007 and p<0.0001, respectively). Exam responses were statistically equivalent between the most traditional and highest overall NTL deliveries. Students rated instructor presentation skills and teaching methods higher when greater instructor involvement (p<0.0001, both) and lower overall NTL levels (P<0.0001, both) were used. Students perceived that teaching methods were most effective when lower student involvement and higher technology levels (p<0.0001, both) were used. When implementing NTL sessions as a single lesson in a traditional-delivery curriculum, instructor involvement appears essential, while the impact of student involvement and educational technology levels varies. Copyright © 2017 Elsevier Inc. All rights reserved.

ACTS Ka-Band Earth Stations: Technology, Performance, and Lessons Learned

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Struharik, Steven J.; Diamond, John J.; Stewart, David

2000-01-01

The Advanced Communications Technology Satellite (ACTS) Project invested heavily in prototype Ka-band satellite ground terminals to conduct an experiments program with ACTS. The ACTS experiments program proposed to validate Ka-band satellite and ground-station technology, demonstrate future telecommunication services, demonstrate commercial viability and market acceptability of these new services, evaluate system networking and processing technology, and characterize Ka-band propagation effects, including development of techniques to mitigate signal fading. This paper will present a summary of the fixed ground terminals developed by the NASA Glenn Research Center and its industry partners, emphasizing the technology and performance of the terminals and the lessons learned throughout their 6-year operation, including the inclined orbit phase-of-operations. The fixed ground stations used for experiments by government, academic, and commercial entities used reflector-based offset-fed antenna systems with antennas ranging in size from 0.35 to 3.4 in. in diameter. Gateway earth stations included two systems referred to as the NASA Ground Station (NGS) and the Link Evaluation Terminal (LET).

Challenge of Effective Technology Integration into Teaching and Learning

ERIC Educational Resources Information Center

Ramorola, M. Z.

2013-01-01

South African teachers are faced with challenges in integrating technology effectively into a coherent framework at school level. There seems to be little evidence of technology integration into classroom activities such as systematic planning and implementation of lessons that require learners to think critically, work collaboratively, and use…

When Teachers Learn to Use Technology, Students Benefit. Lessons from Research

ERIC Educational Resources Information Center

Kilion, Joellen

2016-01-01

Joellen Killion is senior advisor to Learning Forward. In each issue of JSD, Killion explores a recent research study to help practitioners understand the impact of particular professional learning practices on student outcomes. The study presented here builds on past research about the relationships between teacher practice and beliefs, teacher…

Examining Pre-Service Teachers' Design Capacities for Web-Based 21st Century New Culture of Learning

ERIC Educational Resources Information Center

Chai, Ching Sing; Tan, Lynde; Deng, Feng; Koh, Joyce Hwee Ling

2017-01-01

Although there is an established body of work arguing that teachers' technological pedagogical content knowledge (TPACK) is necessary for designing ICT-integrated lessons, little is known about the relationships among teachers' beliefs about learning, their design dispositions, learning design practices and TPACK. Critical inquiry in this aspect…

Losing Something In Translation: Turning Requirements Into Specifications

DTIC Science & Technology

2016-06-01

specialized in Organizational Behavior. Perhaps the reader remembers the comedy routine in which a performer orates a lyrical, emotive passage in a deep...learned from the Technology Maturation and Risk Reduction phase and the Engineering and Manufacturing Development phase. These lessons learned, for

78 FR 70026 - Proposed Agency Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-22

..., including through the use of automated collection techniques or other forms of information technology. The... Technologies Office (VTO) has developed a voluntary initiative, the EV Everywhere Workplace Charging Challenge... specific success stories, lessons learned, and best practices employers have deployed, thereby increasing...

Visual business ecosystem intelligence: lessons from the field.

PubMed

Basole, Rahul C

2014-01-01

Macroscopic insight into business ecosystems is becoming increasingly important. With the emergence of new digital business data, opportunities exist to develop rich, interactive visual-analytics tools. Georgia Institute of Technology researchers have been developing and implementing visual business ecosystem intelligence tools in corporate settings. This article discusses the challenges they faced, the lessons learned, and opportunities for future research.

Pedagogy-Based-Technology and Chemistry Students' Performance in Higher Institutions: A Case of Debre Berhan University

ERIC Educational Resources Information Center

Demissie, Tesfaye; Ochonogor, Chukunoye E.; Engida, Temechegn

2011-01-01

Many students have difficulty in learning abstract and complex lessons of chemistry. This study investigated how students develop their understandings of abstract and complex lessons in chemistry with the aid of visualizing tools: animation, simulation and video that allow them to build clear concepts. Animation, simulation and video enable…

Buying a Car: Using On-Line Tools. Technology Update.

ERIC Educational Resources Information Center

McCoy, Kimberly

This lesson plan was created to assist learners in adult basic and literacy education programs with the car-buying process. The goal for the lesson is to "effectively use the Internet to research necessary items before purchasing a car." These nine learning objectives are set: (1) determine what kind of car is needed; (2) determine how…

Teacher Design Knowledge for Technology Enhanced Learning: An Ecological Framework for Investigating Assets and Needs

ERIC Educational Resources Information Center

McKenney, Susan; Kali, Yael; Markauskaite, Lina; Voogt, Joke

2015-01-01

Despite the fact that teaching is increasingly referred to as a design science, teacher education programs devote relatively little time to developing expertise in the design of instruction, beyond lesson planning. Yet today's teachers not only plan lessons that incorporate existing classroom activities and instructional resources, they also…

Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned: Preprint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Tom; Snyder, Neil; Gosnold, Will

This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful developmentmore » today requires a good knowledge of geothermal system design and operation.« less

Targeted Prostate Biopsy: Lessons Learned Midst the Evolution of a Disruptive Technology.

PubMed

Nassiri, Nima; Natarajan, Shyam; Margolis, Daniel J; Marks, Leonard S

2015-09-01

Lessons learned during a 6-year experience with more than 1200 patients undergoing targeted prostate biopsy via MRI/ultrasound fusion are reported: (1) the procedure is safe and efficient, requiring some 15-20 minutes in an office setting; (2) MRI is best performed by a radiologist with specialized training, using a transabdominal multiparametric approach and preferably a 3T magnet; (3) grade of MRI suspicion is the most powerful predictor of biopsy results, eg, Grade 5 usually represents cancer; (4) some potentially important cancers (15%-30%) are MRI-invisible; (5) Targeted biopsies provide >80% concordance with whole-organ pathology. Early enthusiasm notwithstanding, cost-effectiveness is yet to be resolved, and the technologies remain in evolution. Copyright © 2015 Elsevier Inc. All rights reserved.

TARGETED PROSTATE BIOPSY: LESSONS LEARNED MIDST THE EVOLUTION OF A DISRUPTIVE TECHNOLOGY

PubMed Central

Nassiri, Nima; Natarajan, Shyam; Margolis, Daniel J.; Marks, Leonard S.

2015-01-01

Lessons learned during a 6-year experience with more than 1200 patients undergoing targeted prostate biopsy via MRI/US fusion are reported: (1) The procedure is safe and efficient, requiring some 15–20 minutes in an office setting; (2) MRI is best performed by a radiologist with specialized training, employing a trans-abdominal multi-parametric approach and preferably a 3T magnet; (3) Grade of MRI suspicion is the most powerful predictor of biopsy results, e.g., Grade 5 usually represents cancer; (4) Some potentially-important cancers (15%–30%) are MRI-invisible; (5) Targeted biopsies provide >80% concordance with whole-organ pathology. Early enthusiasm notwithstanding, cost-effectiveness is yet to be resolved, and the technologies remain in evolution. PMID:26166671

Low-Temperature Projects of the Department of Energy's Geothermal Technologies Program: Evaluation and Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Tom; Snyder, Neil; Gosnold, Will

This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful developmentmore » today requires a good knowledge of geothermal system design and operation.« less

1981 LTA technology assessment - Past and present

NASA Technical Reports Server (NTRS)

Ashford, R. L.; Levitt, B. B.; Mayer, N. J.; Vocar, J. M.; Woodward, D. E.

1981-01-01

A four-part presentation is made of (1) lessons learned from the design and operation of the 'classic' airships of the 1920s and 30s, with respect to such issues as construction, propulsion, control, instrumentation, ground handling, habitability, aerodynamics, and structure and construction; (2) lessons learned from the development of such specialized lighter-than-air (LTA) concepts as metal-clad airships, semi-buoyant lifting bodies, experimental, sport and commercial free balloons, high-altitude platforms, and tethered aerostats; (3) the current status of LTA technology in various countries, with emphasis on significant developments in configuration, dynamics, control, structures, materials, and propulsion; and (4) a projection of future trends. It is concluded that socio-economic factors will strongly influence and encourage LTA development in the 1990s.

Learning Performance with Interactive Simulations in Medical Education: Lessons Learned from Results of Learning Complex Physiological Models with the HAEMOdynamics SIMulator

ERIC Educational Resources Information Center

Holzinger, Andreas; Kickmeier-Rust, Michael D.; Wassertheurer, Sigi; Hessinger, Michael

2009-01-01

Objective: Since simulations are often accepted uncritically, with excessive emphasis being placed on technological sophistication at the expense of underlying psychological and educational theories, we evaluated the learning performance of simulation software, in order to gain insight into the proper use of simulations for application in medical…

A Study on Learning Effect among Different Learning Styles in a Web-Based Lab of Science for Elementary School Students

ERIC Educational Resources Information Center

Sun, Koun-tem; Lin, Yuan-cheng; Yu, Chia-jui

2008-01-01

The purpose of this study is to explore the learning effect related to different learning styles in a Web-based virtual science laboratory for elementary school students. The online virtual lab allows teachers to integrate information and communication technology (ICT) into science lessons. The results of this experimental teaching method…

Infusing Technology to Enhance Science Lessons: Prospective Teachers as Action Researchers Learning to Teach for Conceptual Change.

ERIC Educational Resources Information Center

Spaid, M. Randall

Today's high school students have grown up in technology-rich environments with video games, personal computers, instant communications, and Internet access. These students are naturally more interested and involved in a technology-infused classroom. Emerging technologies change the teacher's role in the classroom. Professional teachers need to…

Design as a Focus for Technology Integration: Lessons Learned from a PT3 Project

ERIC Educational Resources Information Center

Nelson, Wayne A.; Thomeczek, Melissa

2007-01-01

Plugging in to L.I.T.E.S. project (Leaders in Technology Enhanced Schools--a previously funded Technology Innovation Challenge grant project) at Southern Illinois University Edwardsville (SIUE) has been very successful in its attempts to enhance the technology integration skills of teacher education students, and to improve the capabilities of our…

Mapping the e-Learning Terrain

ERIC Educational Resources Information Center

Marshall, James; Rossett, Allison

2011-01-01

Influential voices, from the published literature, to blogs, and conference keynoters, describe e-learning that is technology rich, mobile, individualized, social and democratic. Classrooms, many note, are disappearing--and should. Blogs, feeds and blends enable this movement from a central function to lessons, information and coaching available…

Matching Teaching and Learning Styles.

ERIC Educational Resources Information Center

Caudill, Gil

1998-01-01

Outlines three basic learning modalities--auditory, visual, and tactile--and notes that technology can help incorporate multiple modalities within each lesson, to meet the needs of most students. Discusses the importance in multiple modality teaching of effectively assessing students. Presents visual, auditory and tactile activity suggestions.…

Lessons learned in acquiring new regulations for shipping advanced electric vehicle batteries

NASA Astrophysics Data System (ADS)

Henriksen, Gary; Hammel, Carol; Altemos, Edward A.

1994-12-01

In 1990, the Electric and Hybrid Propulsion Division of the US Department of Energy established its ad hoc EV Battery Readiness Working Group to identify regulatory barriers to the commercialization of advanced EV battery technologies and facilitate the removal of these barriers. A Shipping Sub-Working Group (SSWG) was formed to address the regulatory issues associated with the domestic and international shipment of these new battery technologies. The SSWG invites major industrial developers of advanced battery technologies to join as members and work closely with appropriate domestic and international regulatory authorities to develop suitable regulations and procedures for the safe transport of these new battery technologies. This paper describes the domestic and international regulatory processes for the transport of dangerous goods; reviews the status of shipping regulations for sodium-beta and lithium batteries; and delineates the lessons learned to date in this process. The sodium-beta battery family was the first category of advanced EV batteries to be addressed by the SSWG. It includes both sodium/sulfur and sodium/metal chloride batteries. Their efforts led to the establishment of a UN number (UN 3292) in the UN Recommendations, for cold cells and batteries, and establishment of a US Department of Transportation general exemption (DOT-E-10917) covering cold and hot batteries, as well as cold cells. The lessons learned for sodium-beta batteries, over the period of 1990--94, are now being applied to the development of regulations for shipping a new generation of lithium battery technologies (lithium-polymer and lithium-aluminum/iron sulfide batteries).

MILSTAR's flexible substrate solar array: Lessons learned, addendum

NASA Technical Reports Server (NTRS)

Gibb, John

1990-01-01

MILSTAR's Flexible Substrate Solar Array (FSSA) is an evolutionary development of the lightweight, flexible substrate design pioneered at Lockheed during the seventies. Many of the features of the design are related to the Solar Array Flight Experiment (SAFE), flown on STS-41D in 1984. FSSA development has created a substantial technology base for future flexible substrate solar arrays such as the array for the Space Station Freedom. Lessons learned during the development of the FSSA can and should be applied to the Freedom array and other future flexible substrate designs.

The development of pedagogical content knowledge in science teachers: New opportunities through technology-mediated reflection and peer-exchange

NASA Astrophysics Data System (ADS)

Madeira, M. Cheryl-Ann

This design-based research study investigates the development of pedagogical content knowledge among nine teacher-participants (N = 9) in three design phases. PCK is a particular type of teacher knowledge that addresses not only the teacher's understanding of the content to be instructed, but also ways of how to teach that content effectively. This knowledge has been well documented over several decades, and is seen as central to teacher expertise. However, its actual development has been difficult for researchers to investigate. This study offers a detailed perspective on how teachers developed PCK with their engagement in lesson planning and enactment of a project-based technology-enhanced lesson. The study includes two specific interventions designed to enhance teachers' development of PCK: (1) scaffolded reflection that occurs throughout the practices; and (2) peer-exchange of lesson plans, enactment ideas, and completed reflections. The findings demonstrate that teachers improve their planning and enactment of project-based technology-enhanced lessons with scaffolded reflection and peer exchange. Positive correlations were seen between teachers' engagement in the reflections and the quality of their lesson planning. Teachers who participated more deeply in the scaffolded reflections were able to understand how their lesson plans and enactment patterns fostered student understanding of relevant science concepts. Positive correlations were also seen between community influence and teacher lesson plans and enactment. Additionally, positive correlations were confirmed between teachers' level of participation in the peer exchange activities and the quality of their lesson planning and enactments. Teachers who contributed more deeply within the online and face-to-face peer community meetings benefited from the different perspectives of their peers about student learning and the best ways to succeed with project-based instruction. This study allowed some insight into how PCK develops as a result of teachers' engagement in the complex set of activities that constitute the practices of lesson planning and enactment. The primary implication of this study is that engaging teachers in scaffolded reflections and peer exchange can be a valuable in-service professional development activity. A methodological strength is derived from an approach to coding teachers' lesson planning and enactment according to an activity systems perspective, drawing on a spectrum of data sources (e.g., wiki-based reflections, planning artefacts, videotaped classroom enactments). Teacher learning---particularly the development of PCK---is recognized as critical in promoting student understanding of science concepts. This dissertation lays out a possible foundation for professional development models that promote effective teacher learning.

Seal Technology for Hypersonic Vehicle and Propulsion: An Overview

NASA Technical Reports Server (NTRS)

Steinetz, Bruce M.

2008-01-01

Hypersonic vehicles and propulsion systems pose an extraordinary challenge for structures and materials. Airframes and engines require lightweight, high-temperature materials and structural configurations that can withstand the extreme environment of hypersonic flight. Some of the challenges posed include very high temperatures, heating of the whole vehicle, steady-state and transient localized heating from shock waves, high aerodynamic loads, high fluctuating pressure loads, potential for severe flutter, vibration, and acoustic loads and erosion. Correspondingly high temperature seals are required to meet these aggressive requirements. This presentation reviews relevant seal technology for both heritage (e.g. Space Shuttle, X-15, and X-38) vehicles and presents several seal case studies aimed at providing lessons learned for future hypersonic vehicle seal development. This presentation also reviews seal technology developed for the National Aerospace Plane propulsion systems and presents several seal case studies aimed at providing lessons learned for future hypersonic propulsion seal development.

Large-Scale Campus Computer Technology Implementation: Lessons from the First Year.

ERIC Educational Resources Information Center

Nichols, Todd; Frazer, Linda H.

The purpose of the Elementary Technology Demonstration Schools (ETDS) Project, funded by IBM and Apple, Inc., was to demonstrate the effectiveness of technology in accelerating the learning of low achieving at-risk students and enhancing the education of high achieving students. The paper begins by giving background information on the district,…

An Exploration of Contemporary Realities of Technology and Teacher Education: Lessons Learned

ERIC Educational Resources Information Center

Bakir, Nesrin

2015-01-01

In order to better prepare preservice teachers to teach with technology, this study examines the current practices and barriers in technology implementation in three teacher education programs. This multiple-case study relied upon site visits, observations, in-depth interviews with faculty, staff, and preservice teachers, and examinations of…

Design for Learning; 1967 Summer Institute of Technology for Children.

ERIC Educational Resources Information Center

Helen L. Beeler School, Marlton, NJ.

This book is a description of a summer institute of the Technology for Children Project which was designed to help teachers combine technological activities with regular academic lessons for children in grades K-6. Included are: (1) the three institute goals which were to orient elementary classroom teachers, to develop guidelines for…

How Teachers Integrate Technology and Their Beliefs About Learning: Is There a Connection?

ERIC Educational Resources Information Center

Judson, Eugene

2006-01-01

Research indicates that teachers who readily integrate technology into their instruction are more likely to possess constructivist teaching styles. Evidence suggests there is a parallel between a teacher's student-centered beliefs about instruction and the nature of the teacher's technology-integrated lessons. This connection between the use of…

Problem Solving: The "Wright" Math. The Centennial of Flight Special Edition. An Educator Guide with Activities in Mathematics, Science, and Technology. NASA CONNECT[TM].

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

NASA CONNECT is an annual series of integrated mathematics, science, and technology instructional distance learning programs for students in grades 6-8. This program is designed for students to learn about the evolution of flight. The program has three components--television broadcast, Web activity, and lesson guide--which are designed as an…

A Jigsaw Cooperative Learning Application in Elementary Science and Technology Lessons: Physical and Chemical Changes

ERIC Educational Resources Information Center

Tarhan, Leman; Ayyildiz, Yildizay; Ogunc, Aylin; Sesen, Burcin Acar

2013-01-01

Background: Cooperative learning is an active learning approach in which students work together in small groups to complete an assigned task. Students commonly find the subject of "physical and chemical changes" difficult and abstract, and thus they generally have many misconceptions about it. Purpose: This study aimed to investigate the…

"Nostalgia for the Past," or What Lessons Young People Could Have Learned and Did Learn

ERIC Educational Resources Information Center

Zorkaia, Nataliia

2009-01-01

The hope that young people would accept and quickly learn Western ideas and democratic principles rather than just economic and technological achievements occupied a key place in the conceptions of the liberal and democratic parties in Russia. The possibilities of the modernization of Russian society and its economy were associated directly with…

Visualizing Boundaries and Embodying Conflicts: Lessons Learned from a Theatrical Professional Development Program

ERIC Educational Resources Information Center

Mundy, Amrit; Chan, Judy

2013-01-01

In the 2011-2012 academic year, the Organizational Development and Learning unit and the Centre for Teaching, Learning and Technology at the University of British Columbia co-developed an interactive theatre project, Conflict Theatre, to engage in discussion around conflict with our audience and to allow us to explore, engage with, and build…

Development of an Online Smartphone-Based eLearning Nutrition Education Program for Low-Income Individuals.

PubMed

Stotz, Sarah; Lee, Jung Sun

2018-01-01

The objective of this report was to describe the development process of an innovative smartphone-based electronic learning (eLearning) nutrition education program targeted to Supplemental Nutrition Assistance Program-Education-eligible individuals, entitled Food eTalk. Lessons learned from the Food eTalk development process suggest that it is critical to include all key team members from the program's inception using effective inter-team communication systems, understand the unique resources needed, budget ample time for development, and employ an iterative development and evaluation model. These lessons have implications for researchers and funding agencies in developing an innovative evidence-based eLearning nutrition education program to an increasingly technology-savvy, low-income audience. Copyright © 2016 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

Meta-analysis of learning design on sciences to develop a teacher’s professionalism training model

NASA Astrophysics Data System (ADS)

Alimah, S.; Anggraito, Y. U.; Prasetyo, A. P. B.; Saptono, S.

2018-03-01

This research explored a meta-analysis ofthe teaching design on sciences teachers’ lesson plans to develop the training model in achieving 21st-century learning competence and the implementation of the scientifically literate school model. This is a qualitative research with descriptively qualitative analysis. The sample was the members of sciences teacher’s organizations in Brebes Central Java Indonesia. Data was collected by documentation, observation, interviews, and questionnaires scale understanding. Analysis of the lesson plans focused on the correctness of development concept and integration of Strengthening Character Education; School Literacy Movement; Communication, Collaboration, Critical Thinking and Creativity; and Higher Order Thinking Skill. The sciences teachers had a good understanding of the components of the lesson plan, but needed further training. The integration of the character education by the teacher was not explicitly written into their lesson plan. The teachers’ skill to integrate the components was still needed improvements. It is found that training and mentoring of lesson plan development to improve the skills of science teachers in achieving 21st-century learning competencies are still urgent to be done. The training and mentoring model proposed here is Peretipe model, to help teachers skillfully design good lesson plans based on Technological Pedagogical, and Content Knowledge.

Developing Electronic Institutional Portfolios for Program and Institutional Assessment.

ERIC Educational Resources Information Center

Borden, Victor M. H.

2002-01-01

Summarizes the lessons learned by the institutions participating in the Urban Universities Portfolio Project regarding the functional and technological requirements for creating and sustaining Web-based institutional portfolios. The most pressing issues were those of aligning technology resources with analytical, evaluative, academic, and design…

Field Experience with Chlorine Dioxide Fumigation of a Hospital: Timeline and Lessons Learned

EPA Science Inventory

Chlorine dioxide (Cl02) fumigation technology was developed and successfully used to remediate four large buildings contaminated with anthrax spores from 2001 through 2004. As a first application of the technology, those remediations were complex, costly and time consuming. There...

Human factors lessons learned in the design and implementation of air traffic control systems

DOT National Transportation Integrated Search

1998-01-01

As air traffic continues to increase, new technology will be needed to accommodate it. The interesting opportunities that new technologies will present for air traffic control (ATC) will be matched by the human factors challenges. Automated tools, al...

Designing Web-Based Science Lesson Plans That Use Problem-Based Learning To Inspire Middle School Kids: KaAMS (Kids as Airborne Mission Scientists).

ERIC Educational Resources Information Center

Koszalka, Tiffany A.; Grabowski, Barbara; Kim, Younghoon

Problem-based learning (PBL) has great potential for inspiring K-12 learning. KaAMS (Kids as Airborne Mission Scientists), an example of PBL, was designed to help teachers inspire middle school students to learning science, math, technology, and geography. The children participate as scientists investigating environmental problems using NASA…

Designing Multimedia Learning Application with Learning Theories: A Case Study on a Computer Science Subject with 2-D and 3-D Animated Versions

ERIC Educational Resources Information Center

Rias, Riaza Mohd; Zaman, Halimah Badioze

2011-01-01

Higher learning based instruction may be primarily concerned in most cases with the content of their academic lessons, and not very much with their instructional delivery. However, the effective application of learning theories and technology in higher education has an impact on student performance. With the rapid progress in the computer and…

Managed access technology to combat contraband cell phones in prison: Findings from a process evaluation.

PubMed

Grommon, Eric

2018-02-01

Cell phones in correctional facilities have emerged as one of the most pervasive forms of modern contraband. This issue has been identified as a top priority for many correctional administrators in the United States. Managed access, a technology that utilizes cellular signals to capture transmissions from contraband phones, has received notable attention as a promising tool to combat this problem. However, this technology has received little evaluative attention. The present study offers a foundational process evaluation and draws upon output measures and stakeholder interviews to identify salient operational challenges and subsequent lessons learned about implementing and maintaining a managed access system. Findings suggest that while managed access captures large volumes of contraband cellular transmissions, the technology requires significant implementation planning, personnel support, and complex partnerships with commercial cellular carriers. Lessons learned provide guidance for practitioners to navigate these challenges and for scholars to improve future evaluations of managed access. Copyright © 2017 Elsevier Ltd. All rights reserved.

Artificial intelligence costs, benefits, risks for selected spacecraft ground system automation scenarios

NASA Technical Reports Server (NTRS)

Truszkowski, Walter F.; Silverman, Barry G.; Kahn, Martha; Hexmoor, Henry

1988-01-01

In response to a number of high-level strategy studies in the early 1980s, expert systems and artificial intelligence (AI/ES) efforts for spacecraft ground systems have proliferated in the past several years primarily as individual small to medium scale applications. It is useful to stop and assess the impact of this technology in view of lessons learned to date, and hopefully, to determine if the overall strategies of some of the earlier studies both are being followed and still seem relevant. To achieve that end four idealized ground system automation scenarios and their attendant AI architecture are postulated and benefits, risks, and lessons learned are examined and compared. These architectures encompass: (1) no AI (baseline), (2) standalone expert systems, (3) standardized, reusable knowledge base management systems (KBMS), and (4) a futuristic unattended automation scenario. The resulting artificial intelligence lessons learned, benefits, and risks for spacecraft ground system automation scenarios are described.

Artificial intelligence costs, benefits, and risks for selected spacecraft ground system automation scenarios

NASA Technical Reports Server (NTRS)

Truszkowski, Walter F.; Silverman, Barry G.; Kahn, Martha; Hexmoor, Henry

1988-01-01

In response to a number of high-level strategy studies in the early 1980s, expert systems and artificial intelligence (AI/ES) efforts for spacecraft ground systems have proliferated in the past several years primarily as individual small to medium scale applications. It is useful to stop and assess the impact of this technology in view of lessons learned to date, and hopefully, to determine if the overall strategies of some of the earlier studies both are being followed and still seem relevant. To achieve that end four idealized ground system automation scenarios and their attendant AI architecture are postulated and benefits, risks, and lessons learned are examined and compared. These architectures encompass: (1) no AI (baseline); (2) standalone expert systems; (3) standardized, reusable knowledge base management systems (KBMS); and (4) a futuristic unattended automation scenario. The resulting artificial intelligence lessons learned, benefits, and risks for spacecraft ground system automation scenarios are described.

Implementing Telerehabilitation Research for Stroke Rehabilitation with Community Dwelling Veterans: Lessons Learned

PubMed Central

Chumbler, Neale R.; Quigley, Patricia; Sanford, Jon; Griffiths, Patricia; Rose, Dorian; Morey, Miriam; Ely, E. Wesley; Hoenig, Helen

2010-01-01

Telerehabilitation (TR) is the use of telehealth technologies to provide distant support, rehabilitation services, and information exchange between people with disabilities and their clinical providers. This article discusses the barriers experienced when implementing a TR multi-site randomized controlled trial for stroke patients in their homes, and the lessons learned. The barriers are divided into two sections: those specific to TR and those pertinent to the conduct of tele-research. The TR specific barriers included the rapidly changing telecommunications and health care environment and inconsistent equipment functionality. The barriers applicable to tele-research included the need to meet regulations in diverse departments and rapidly changing research regulations. Lessons learned included the need for: telehealth equipment options to allow for functionality within a diverse telecommunications infrastructure; rigorous pilot testing of all equipment in authentic situations; and on-call and on-site biomedical engineering and/or IT staff. PMID:25945169

Lessons-Learned from D and D Activities at the Five Gaseous Diffusion Buildings (K-25, K- 27, K-29, K-31 and K-33) East Tennessee Technology Park, Oak Ridge, TN - 13574

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kopotic, James D.; Ferri, Mark S.; Buttram, Claude

The East Tennessee Technology Park (ETTP) is the site of five former gaseous diffusion plant (GDP) process buildings that were used to enrich uranium from 1945 to 1985. The process equipment in the original two buildings (K-25 and K-27) was used for the production of highly enriched uranium (HEU), while that in the three later buildings (K-29, K-31 and K-33) produced low enriched uranium (LEU). Equipment was contaminated primarily with uranium and to a lesser extent technetium (Tc). Decommissioning of the GDP process buildings has presented several unique challenges and produced many lessons-learned. Among these is the importance of good,more » up-front characterization in developing the best demolition approach. Also, chemical cleaning of process gas equipment and piping (PGE) prior to shutdown should be considered to minimize the amount of hold-up material that must be removed by demolition crews. Another lesson learned is to maintain shutdown buildings in a dry state to minimize structural degradation which can significantly complicate characterization, deactivation and demolition efforts. Perhaps the most important lesson learned is that decommissioning GDP process buildings is first and foremost a waste logistics challenge. Innovative solutions are required to effectively manage the sheer volume of waste generated from decontamination and demolition (D and D) of these enormous facilities. Finally, close coordination with Security is mandatory to effectively manage Special Nuclear Material (SNM) and classified equipment issues. (authors)« less

Getting Inside the Black Box of Technology Integration in Education: Teachers' Stimulated Recall of Classroom Observations

ERIC Educational Resources Information Center

Tondeur, Jo; Kershaw, L. H.; Vanderlinde, R.; van Braak, J.

2013-01-01

This study explored the black box of technology integration through the stimulated recall of teachers who showed proficiency in the use of technology to support teaching and learning. More particularly, the aim of the study was to examine how these teachers use technology in their lessons and to gain deeper insights into the multifaceted…

Intraoperative neural monitoring in thyroid surgery: lessons learned from animal studies

PubMed Central

Randolph, Gregory W.; Lu, I-Cheng; Chang, Pi-Ying; Chen, Yi-Ting; Hun, Pao-Chu; Lin, Yi-Chu; Dionigi, Gianlorenzo; Chiang, Feng-Yu

2016-01-01

Recurrent laryngeal nerve (RLN) injury remains a significant morbidity associated with thyroid and parathyroid surgery. In the past decade, surgeons have increasingly used intraoperative neural monitoring (IONM) as an adjunct technique for localizing and identifying the RLN, detecting RLN injury, and predicting the outcome of vocal cord function. In recent years, many animal studies have investigated common pitfalls and new applications of IONM. For example, the use of IONM technology in animal models has proven valuable in studies of the electrophysiology of RLN injury. The advent of animal studies has substantially improved understanding of IONM technology. Lessons learned from animal studies have immediate clinical applications in establishing reliable strategies for preventing intraoperative RLN injury. This article gives an overview of the research progress on IONM-relevant animal models. PMID:27867861

Record, Replay, Reflect: Videotaped Lessons Accelerate Learning for Teachers and Coaches

ERIC Educational Resources Information Center

Knight, Jim; Bradley, Barbara A.; Hock, Michael; Skrtic, Thomas M.; Knight, David; Brasseur-Hock, Irma; Clark, Jean; Ruggles, Marilyn; Hatton, Carol

2012-01-01

New technologies can dramatically change the way people live and work. Jet engines transformed travel. Television revolutionized news and entertainment. Computers and the Internet have transformed just about everything else. And now small video cameras have the potential to transform professional learning. Recognizing the potential of this new…

Creating Older Adults Technology Training Policies: Lessons from Community Practices

ERIC Educational Resources Information Center

Nycyk, Michael; Redsell, Margaret

2007-01-01

Influencing government policy in adult learning areas requires consistent efforts in having findings noticed by educational policymakers. Submissions by Adult Learning Australia and researchers have called for unified educational policies and practices across Australia. This paper argues that, whilst it is important to address macro issues of…

Why Mobile Is a Must

ERIC Educational Resources Information Center

McCaffrey, Mary

2011-01-01

There is a need for a new educational model that makes learning personal and motivating, and helps secure students' future in the knowledge economy. Mobile technology opens the door to it. Mobile devices provide the platform and, as importantly, the incentive for students to take personal ownership of the learning experience. The lessons absorbed…

Technology-Enhanced Learning and Community with Market Appeal.

ERIC Educational Resources Information Center

Young, Brian Alexander

2000-01-01

Describes the University of Dayton's Personalized Virtual Room. This Web interface to a virtual space that looks and feels like a campus residence was designed to encourage communication and connectivity among first-year students before they arrive on campus. Discusses the initiative's goals and successes, student reaction, and lessons learned.…

A Science Club Takes Action

ERIC Educational Resources Information Center

LeDee, Olivia; Mosser, Anna; Gamble, Tony; Childs, Greg; Oberhauser, Karen

2007-01-01

The after-school science club at Galtier Math, Science, and Technology Elementary Magnet School in St. Paul, Minnesota, learned some valuable lessons when they took newfound knowledge about pollution into their homes. After learning about the effects of various contaminants on health and what informed citizens can do about it, students tested…

Game-Based Teaching: What Educators Can Learn from Videogames

ERIC Educational Resources Information Center

Jackson, Janna

2009-01-01

Most teachers only dream of their students spending the amount of motivation, attention, passion, and critical thinking on their classes that some students do playing videogames. This investigation examines the success, pitfalls, and lessons learned from incorporating videogame-like components into an educational technology class. For example,…

Supporting Teachers Learning through the Collaborative Design of Technology-Enhanced Science Lessons

ERIC Educational Resources Information Center

Kafyulilo, Ayoub C.; Fisser, Petra; Voogt, Joke

2015-01-01

This study used the Interconnected Model of Professional Growth (Clarke & Hollingsworth in "Teaching and Teacher Education," 18, 947-967, 2002) to unravel how science teachers' technology integration knowledge and skills developed in a professional development arrangement. The professional development arrangement used Technological…

Solar Greenhouses and Sunspaces: Lessons Learned.

ERIC Educational Resources Information Center

Thomas, Stephen G.; And Others

Solar technology systems are being studied, managed, built and offered as an effective alternative energy option. This publication presents background material for the building and operation of better sunspaces and greenhouses. Recent developments in solar technology are explained and information on solar greenhouse and sunspace is provided (in…

NASA Materials Related Lessons Learned

NASA Technical Reports Server (NTRS)

Garcia, Danny; Gill, Paul S.; Vaughan, William W.

2003-01-01

Lessons Learned have been the basis for our accomplishments throughout the ages. They have been passed down from father to son, mother to daughter, teacher to pupil, and older to younger worker. Lessons Learned have also been the basis for the nation s accomplishments for more than 200 years. Both government and industry have long recognized the need to systematically document and utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. Through the knowledge captured and recorded in Lessons Learned from more than 80 years of flight in the Earth s atmosphere, NASA s materials researchers are constantly working to develop stronger, lighter, and more durable materials that can withstand the challenges of space. The Agency s talented materials engineers and scientists continue to build on that rich tradition by using the knowledge and wisdom gained from past experiences to create futuristic materials and technologies that will be used in the next generation of advanced spacecraft and satellites that may one day enable mankind to land men on another planet or explore our nearest star. These same materials may also have application here on Earth to make commercial aircraft more economical to build and fly. With the explosion in technical accomplishments over the last decade, the ability to capture knowledge and have the capability to rapidly communicate this knowledge at lightning speed throughout an organization like NASA has become critical. Use of Lessons Learned is a principal component of an organizational culture committed to continuous improvement.

NASA Materials Related Lessons Learned

NASA Technical Reports Server (NTRS)

Garcia, Danny; Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

Lessons Learned have been the basis for our accomplishments throughout the ages. They have been passed down from father to son, mother to daughter, teacher to pupil, and older to younger worker. Lessons Learned have also been the basis for the nation's accomplishments for more than 200 years. Both government and industry have long recognized the need to systematically document and utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. Through the knowledge captured and recorded in Lessons Learned from more than 80 years of flight in the Earth's atmosphere, NASA's materials researchers are constantly working to develop stronger, lighter, and more durable materials that can withstand the challenges of space. The Agency's talented materials engineers and scientists continue to build on that rich tradition by using the knowledge and wisdom gained from past experiences to create futurist materials and technologies that will be used in the next generation of advanced spacecraft and satellites that may one day enable mankind to land men on another planet or explore our nearest star. These same materials may also have application here on Earth to make commercial aircraft more economical to build and fly. With the explosion in technical accomplishments over the last decade, the ability to capture knowledge and have the capability to rapidly communicate this knowledge at lightning speed throughout an organization like NASA has become critical. Use of Lessons Learned is a principal component of an organizational culture committed to continuous improvement.

Shuttle Performance: Lessons Learned, Part 2

NASA Technical Reports Server (NTRS)

Arrington, J. P. (Compiler); Jones, J. J. (Compiler)

1983-01-01

Several areas of Space Shuttle technology were addressed including aerothermal environment, thermal protection, measurement and analysis, Shuttle carrier aerodynamics, entry analysis of the STS-3, and an overview of each section.

More Technology, Better Learning Resources, Better Learning? Lessons from Adopting Virtual Microscopy in Undergraduate Medical Education

ERIC Educational Resources Information Center

Helle, Laura; Nivala, Markus; Kronqvist, Pauliina

2013-01-01

The adoption of virtual microscopy at the University of Turku, Finland, created a unique real-world laboratory for exploring ways of reforming the learning environment. The purpose of this study was to evaluate the students' reactions and the impact of a set of measures designed to boost an experimental group's understanding of abnormal histology…

Lessons Learned from the Holocaust: Blogging to Teach Critical Multicultural Literacy

ERIC Educational Resources Information Center

Stevens, Elizabeth Years; Brown, Rachel

2011-01-01

This qualitative dual-case study addresses two 21st century teacher education imperatives, technology infusion and critical multicultural literacy instruction. We researched the integration of a blog as a tool to promote technology use in a graduate course on literacy and technology with a thematic focus on the Holocaust. Using a grounded theory…

Lessons from Adult Education: Identifying and Exploring Emerging Ethical Issues in Technologically Enhanced Performance

ERIC Educational Resources Information Center

Mabry, Christie Knittel; O'Driscoll, Tony

2003-01-01

Technologically Enhanced Performance (TEP) is the application of technology to improve the performance of knowledge workers. TEP is both an intellectual and ideological complement to the field of Adult Education. As such, much can be learned about ethical issues associated with implementing TEP from the established research and literature base in…

An Ethnographic-Case Study of Beliefs, Context Factors, and Practices of Teachers Integrating Technology

ERIC Educational Resources Information Center

Angers, Julie; Machtmes, Krisanna

2005-01-01

This ethnographic-case study explored the beliefs, context factors, and practices of three middle school exemplary teachers that led to a technology-enriched curriculum. Findings suggest that these middle school teachers believe technology is a tool that adds value to lessons and to students learning and motivation. Due to a personal interest in…

How Schools Are Using Action Research on Practical Work, New Technologies and Research and Development to Improve Student Outcomes

ERIC Educational Resources Information Center

Davenport, Carol

2013-01-01

Three methods from different schools illustrate how the cyclic process of action research can be used to develop teaching skills. The importance of learning from successful and unsuccessful lessons or parts of lessons is emphasised as the basis for development and improvement. This process can be carried out on an individual basis but development…

Crowdfunding Astronomy Outreach Projects: Lessons learned from the UNAWE crowdfunding campaign

NASA Astrophysics Data System (ADS)

Ashton, A. J., Heenatigala, T.; Russo, P.

2014-12-01

In recent years, crowdfunding has become a popular method of funding new technology or entertainment products, or artistic projects. The idea is that people or projects ask for many small donations from individuals who support the proposed work, rather than a large amount from a single source. Crowdfunding is usually done via an online portal or platform which handles the financial transactions involved. The Universe Awareness (UNAWE) programme decided to undertake a Kickstarter1 crowdfunding campaign centring on the resource Universe in a Box. In this article we present the lessons learned and best practices from that campaign.

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned.

PubMed

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, Aids

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting.

Testing of dual-junction SCARLET modules and cells plus lessons learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Eskenazi, M.I.; Murphy, D.M.; Ralph, E.L.

1997-12-31

Key simulator test methods and results for Solar Concentrator Array with Refractive Linear Element Technology (SCARLET) cells, modules, and module strings are presented from the NASA/JPL New Millennium DS1 program. Important observations and lessons learned are discussed. These findings include: (1) a significant efficiency increase for shunted low performing 1 sun cells at SCARLET`s {approximately}7 sun concentration, (2) a decrease in temperature coefficient under SCARLET concentration, and (3) the importance of active germanium (third junction) screening during GaInP{sub 2}/GaAs/Ge cell production especially when red reflecting covers are used.

Lessons from the other side: what can we learn from the private sector?

PubMed

Clarke, D

1999-01-01

Business has reacted in an impressive manner to increasing globalisation, short-term stock market pressure for performance, emerging industries and new technologies. While the private sector has become increasingly competitive, the public sector has not adopted this commercial rigour. Funding pressures on health services will continue, as will increasing consumer and staff demands and the blurring of public and private health care provision. As a result, there are lessons and techniques the public and private health sectors should learn from each other. I have drawn the issues that follow from my experience in the steel and food industries.

Water Innovations and Lessons Learned From Water Recycling in Space

NASA Technical Reports Server (NTRS)

Flynn, Michael

2013-01-01

This Presentation will cover technology and knowledge transfers from space exploration to earth and the tourism industry, for example, water and air preservation, green buildings and sustainable cities.

76 FR 57026 - Air Force Scientific Advisory Board Notice of Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-15

... and Technology plan emphasizing next generation energy, autonomy, sustainment, cyber, and ISR... secure cyber ops; acquisition challenges amid new era of defense policy and lessons learned from...

Lessons from the Global South

ERIC Educational Resources Information Center

Burns, Mary; Montalvo, Marianne; Rhodes, Rebecca

2010-01-01

What can Mali, an impoverished, land-locked West African nation, teach educators about mobile technology? Little to nothing, one might think. Yet in Mali, as in much of sub-Saharan Africa, teachers and students are increasingly using mobile technologies for learning and teaching. While educators in the United States have debated whether, why, and…

Unmanned Ground Vehicle Communications Relays: Lessons Learned

DTIC Science & Technology

2014-04-01

technology, specifically an open-source VPN package, OpenVPN . This technology provides a wrapper around the network messages, providing a plug-and-play...performed in OpenVPN :  Set the Maximum Transmission Unit (MTU) to 1600. This is because each VPN endpoint has an MTU of 1500 (the default for Ethernet

2020 Vision: Experts Forecast What the Digital Revolution Will Bring Next

ERIC Educational Resources Information Center

T.H.E. Journal, 2010

2010-01-01

In this article, a trio of current and former federal ed tech honchos, as well as a host of technology leaders nationwide, offer their forecasts, while also considering the lessons the first chapters of digital age have left behind. A timeline of learning technologies is also included.

Corporate Energy Conservation Program for Alcoa North American Extrusions: Office of Industrial Technologies (OIT) Aluminum BestPractices Management Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-06

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

The Vindex Special: Learning about Technology through Advertising.

ERIC Educational Resources Information Center

Smulyan, Susan; Kosty, Carlita; Brennan, Sheila

1998-01-01

Presents a lesson plan that uses content analysis of an advertisement for an early sewing machine, the Vindex, to examine issues of marketing, new technology, and consumer economics. Includes a reproduction of an early advertisement, a list of additional readings, and several sets of questions concerning target audience, information, and image…

Scaling Up Success: Lessons Learned from Technology-Based Educational Improvement

ERIC Educational Resources Information Center

Dede, Chris, Ed.; Honan, James P., Ed.; Peters, Laurence C., Ed.

2005-01-01

Drawing from the information presented at a conference sponsored by the Harvard Graduate School of Education and the Mid-Atlantic Regional Technology in Education Consortium, educators, researchers, and policymakers translate theory into practice to provide a hands-on resource that describes different models for scaling up success. This resource…

Everybody Dreams: Preparing a New Generation. NASA Explorer Schools Project

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, 2005

2005-01-01

NASA Explorer Schools provides unique opportunities for students and teachers by offering access to technology and resources that are seemingly beyond reach. Combining new technologies with NASA content, lesson plans, and real-world experiments enables teachers to enhance inquiry-based learning and augment student engagement. This publication…

A Remote-Sensing Mission

ERIC Educational Resources Information Center

Hotchkiss, Rose; Dickerson, Daniel

2008-01-01

Sponsored by NASA and the JASON Education Foundation, the remote Sensing Earth Science Teacher Education Program (RSESTeP) trains teachers to use state-of-the art remote-sensing technology with the idea that participants bring back what they learn and incorporate it into Earth science lessons using technology. The author's participation in the…

Rural hospital information technology implementation for safety and quality improvement: lessons learned.

PubMed

Tietze, Mari F; Williams, Josie; Galimbertti, Marisa

2009-01-01

This grant involved a hospital collaborative for excellence using information technology over 3-year period. The project activities focused on the improvement of patient care safety and quality in Southern rural and small community hospitals through the use of technology and education. The technology component of the design involved the implementation of a Web-based business analytic tool that allows hospitals to view data, create reports, and analyze their safety and quality data. Through a preimplementation and postimplementation comparative design, the focus of the implementation team was twofold: to recruit participant hospitals and to implement the technology at each of the 66 hospital sites. Rural hospitals were defined as acute care hospitals located in a county with a population of less than 100 000 or a state-administered Critical Access Hospital, making the total study population target 188 hospitals. Lessons learned during the information technology implementation of these hospitals are reflective of the unique culture, financial characteristics, organizational structure, and technology architecture of rural hospitals. Specific steps such as recruitment, information technology assessment, conference calls for project planning, data file extraction and transfer, technology training, use of e-mail, use of telephones, personnel management, and engaging information technology vendors were found to vary greatly among hospitals.

Teachers' Perceptions and Attitudes of Infusing Technology in High School Classrooms to Strengthen Pedagogy: A Qualitative Embedded Single-Case Study

ERIC Educational Resources Information Center

Singleton, Yolanda

2017-01-01

Traditional teaching methods no longer motivate students to learn, especially with the influence of technology in their daily lives. This disconnect has led to a continual influx of teachers who are forced to adapt to this shift in teaching, embracing technology, and restructuring pedagogy to include technology-driven lessons. Because perception…

GAS INJECTION/WELL STIMULATION PROJECT

DOE Office of Scientific and Technical Information (OSTI.GOV)

John K. Godwin

2005-12-01

Driver Production proposes to conduct a gas repressurization/well stimulation project on a six well, 80-acre portion of the Dutcher Sand of the East Edna Field, Okmulgee County, Oklahoma. The site has been location of previous successful flue gas injection demonstration but due to changing economic and sales conditions, finds new opportunities to use associated natural gas that is currently being vented to the atmosphere to repressurize the reservoir to produce additional oil. The established infrastructure and known geological conditions should allow quick startup and much lower operating costs than flue gas. Lessons learned from the previous project, the lessons learnedmore » form cyclical oil prices and from other operators in the area will be applied. Technology transfer of the lessons learned from both projects could be applied by other small independent operators.« less

RAID/C90 Technology Integration

NASA Technical Reports Server (NTRS)

Ciotti, Bob; Cooper, D. M. (Technical Monitor)

1994-01-01

In March 1993, NAS was the first to connect a Maximum Strategy RAID disk to the C90 using standard Cray provided software. This paper discusses the problems encountered, lessons learned, and performance achieved.

A Rapid Auto-Indexing Technology for Designing Readable E-Learning Content

ERIC Educational Resources Information Center

Yu, Pao-Ta; Liao, Yuan-Hsun; Su, Ming-Hsiang; Cheng, Po-Jen; Pai, Chun-Hsuan

2012-01-01

A rapid scene indexing method is proposed to improve retrieval performance for students accessing instructional videos. This indexing method is applied to anchor suitable indices to the instructional video so that students can obtain several small lesson units to gain learning mastery. The method also regulates online course progress. These…

Empirical Data and Emerging Power Critiques: Lessons Learned

ERIC Educational Resources Information Center

Stockman, Caroline

2016-01-01

This paper evidences the importance of maintaining a dynamic interpretive stance in e-learning research. In particular, it shows how a rigorous methodology, tailored to the research question, overlooked the importance of power and knowledge in technology acceptance research for education. It was perhaps the affordance of the mixed methods design,…

Design Principles for "Thriving in Our Digital World": A High School Computer Science Course

ERIC Educational Resources Information Center

Veletsianos, George; Beth, Bradley; Lin, Calvin; Russell, Gregory

2016-01-01

"Thriving in Our Digital World" is a technology-enhanced dual enrollment course introducing high school students to computer science through project- and problem-based learning. This article describes the evolution of the course and five lessons learned during the design, development, implementation, and iteration of the course from its…

Why Teacher Must Go Mobile

ERIC Educational Resources Information Center

Pascopella, Angela

2009-01-01

This article profiles Cathleen Norris, a Regents Professor in the department of Learning Technologies at the University of North Texas and co-creator of GoKnow Learning who encourages teachers to use cell phones in lessons. As a middle and high school math teacher for 14 years in the Norman (Oklahoma) School District and Dallas (Texas) Independent…

Impariamo Insieme in Italia (Learning Together in Italy) via "Scambio Di Instruzione--Through Instructional Exchange"

ERIC Educational Resources Information Center

Veltri, Barbara Torre

2015-01-01

Preparing teacher candidates for their roles in 21st century schools calls for direct experiences with inquisitive, linguistically diverse, and often technologically savvy students across global and economic contexts. This article presents the lessons learned from a practicum experience during a semester abroad in Italy, where faculty, teacher…

Designing a Programmatic Digital Learning Environment: Lessons from Prototyping

ERIC Educational Resources Information Center

Gal, Diane; Lewis, Mark

2018-01-01

Promoted as a way to enhance learning and improve efficiencies, the steady rise of technology adoption across higher education has created both new opportunities and new challenges. Borrowing principles of design thinking and related user- or learner-centered design practices, this descriptive case study offers an example of how institutions of…

Designing a WebQuest

ERIC Educational Resources Information Center

Salsovic, Annette R.

2009-01-01

A WebQuest is an inquiry-based lesson plan that uses the Internet. This article explains what a WebQuest is, shows how to create one, and provides an example. When engaged in a WebQuest, students use technology to experience cooperative learning and discovery learning while honing their research, writing, and presentation skills. It has been found…

When and Where You Want It: Continuing Education from a Distance

ERIC Educational Resources Information Center

Shade, Stacy Deck; Barber, Gerard M.

2004-01-01

Online technology is increasingly being used as a tool for delivery of continuing education to health care professionals. This paper discusses key lessons learned in developing a distance-learning program. It provides practical information on ways to enhance interactivity and overcome obstacles. Preliminary outcomes for learners in a four-state…

Introducing Online Training in an Early Childhood Professional Development System: Lessons Learned in One State

ERIC Educational Resources Information Center

Stone-MacDonald, Angi; Douglass, Anne

2015-01-01

Online educational opportunities provide improved access to high quality professional development for the early education and care workforce. Online and technology mediated learning can create sustainable education and development opportunities for states when face-to-face training is financially prohibitive. This study examined one state's…

Student Reflection and Learning through Peer Reviews

ERIC Educational Resources Information Center

Boase-Jelinek, Daniel; Parker, Jenni; Herrington, Jan

2013-01-01

This paper describes lessons learnt whilst using an online peer review system in an undergraduate unit for pre-service teachers. In this unit, students learn to use information technologies as part of their future teaching practice. The unit aims to foster graduates who become lifelong reflective educators by providing opportunities to explore and…

Blending for Student Engagement: Lessons Learned for MOOCs and Beyond

ERIC Educational Resources Information Center

Montgomery, Amanda P.; Hayward, Denyse V.; Dunn, William; Carbonaro, Mike; Amrhein, Carl G.

2015-01-01

The purpose of this ongoing, three-year action research study is to explore the digital challenges of student engagement in higher education within the experimental platform of blended learning. Research questions examine the role of digital innovation in supporting diverse learners, as well as building meaningful connections with technology for…

Factors predicting teachers' attitudes towards the use of ICT in teaching and learning

NASA Astrophysics Data System (ADS)

Ayub, Ahmad Fauzi Mohd; Bakar, Kamariah Abu; Ismail, Rohayati

2015-10-01

Technology has revolutionized in the field of Education. The importance of technology in schools cannot be ignored. While it is important that mathematics teachers should have positive attitudes towards adopting ICT in their teaching, various problems can arise when integrating ICT into classroom lessons. This study explored the factors that influence the attitudes of mathematic teachers in the integration of ICT in the teaching and learning process. A total of 187 mathematics teachers from the state of Selangor in Malaysia were randomly selected from a stratified cluster sample. The research examined five factors that were postulated to impact teachers' attitudes towards the integration of ICT in their lessons, viz. teachers' technology competence, school culture, access to ICT, school support, and years of classroom teaching experience. The findings showed that the teachers' attitudes towards using ICT in teaching and learning were positively correlated with the teachers' technology competence [r = .41; p < .01], ICT school culture [r = .261; p < .01], school support [r = .366; p < .01] and access to ICT resources [r = .220; p < .01]. However, a negative relationship existed between years of teaching and attitudes towards using ICT in teaching and learning [r = -0.192; p < .01]. A multiple regression analysis showed that 29.1% of the variation in teachers' attitudes towards using ICT in the classroom was explained by the variation in teachers' technology competence, school support and school culture, with the effects of teaching experience and ICT resource access being negligible.

Effect of Cooperative Learning and Traditional Methods on Students' Achievements and Identifications of Laboratory Equipments in Science-Technology Laboratory Course

ERIC Educational Resources Information Center

Aydin, Suleyman

2011-01-01

Science lessons taught via experiments motivate the students, and make them more insistent on learning science. This study aims to examine the effects of cooperative learning on students' academic achievements and their skills in identifying laboratory equipments. The sample for the study consisted of a total of 43 sophomore students in primary…

Intelligent transportation systems benefits, costs, and lessons learned : 2014 update report.

DOT National Transportation Integrated Search

2014-06-01

Intelligent transportation systems (ITS) provide a proven set of strategies for advancing transportation safety, mobility, and environmental sustainability by integrating communication and information technology applications into the management and o...

Graphics Processor Units (GPUs)

NASA Technical Reports Server (NTRS)

Wyrwas, Edward J.

2017-01-01

This presentation will include information about Graphics Processor Units (GPUs) technology, NASA Electronic Parts and Packaging (NEPP) tasks, The test setup, test parameter considerations, lessons learned, collaborations, a roadmap, NEPP partners, results to date, and future plans.

Field studies of safety security rescue technologies through training and response activities

NASA Astrophysics Data System (ADS)

Murphy, Robin R.; Stover, Sam

2006-05-01

This paper describes the field-oriented philosophy of the Institute for Safety Security Rescue Technology (iSSRT) and summarizes the activities and lessons learned during calendar year 2005 of its two centers: the Center for Robot-Assisted Search and Rescue and the NSF Safety Security Rescue industry/university cooperative research center. In 2005, iSSRT participated in four responses (La Conchita, CA, Mudslides, Hurricane Dennis, Hurricane Katrina, Hurricane Wilma) and conducted three field experiments (NJTF-1, Camp Hurricane, Richmond, MO). The lessons learned covered mobility, operator control units, wireless communications, and general reliability. The work has collectively identified six emerging issues for future work. Based on these studies, a 10-hour, 1 continuing education unit credit course on rescue robotics has been created and is available. Rescue robots and sensors are available for loan upon request.

Domain-Specific Aspects of Technological Pedagogical Content Knowledge: Music Education and the Importance of Affect

ERIC Educational Resources Information Center

Macrides, Elena; Angeli, Charoula

2018-01-01

The present study addresses the lack of a theoretical framework for the integration of technology in music teaching and learning, and explores, within the framework of Technological Pedagogical Content Knowledge (TPACK), the importance of affect in the instructional design of music lessons. The purpose of this study is twofold: (a) to extend the…

Collecting, Integrating, and Disseminating Patient-Reported Outcomes for Research in a Learning Healthcare System

PubMed Central

Harle, Christopher A.; Lipori, Gloria; Hurley, Robert W.

2016-01-01

Introduction: Advances in health policy, research, and information technology have converged to increase the electronic collection and use of patient-reported outcomes (PROs). Therefore, it is important to share lessons learned in implementing PROs in research information systems. Case Description: The purpose of this case study is to describe a novel information system for electronic PROs and lessons learned in implementing that system to support research in an academic health center. The system incorporates freely available and commercial software and involves clinical and research workflows that support the collection, transformation, and research use of PRO data. The software and processes that comprise the system serve three main functions, (i) collecting electronic PROs in clinical care, (ii) integrating PRO data with non-patient generated clinical data, and (iii) disseminating data to researchers through the institution’s research informatics infrastructure, including the i2b2 (Informatics for Integrating Biology and the Bedside) system. Strategies: Our successful design and implementation was driven by three overarching strategies. First, we selected and implemented multiple interfaced technologies to support PRO collection, management, and research use. Second, we aimed to use standardized approaches to measuring PROs, sending PROs between systems, and disseminating PROs. Finally, we focused on using technologies and processes that aligned with existing clinical research information management strategies within our organization. Conclusion: These experiences and lessons may help future implementers and researchers enhance the scale and sustainable use of systems for research use of PROs. PMID:27563683

Collecting, Integrating, and Disseminating Patient-Reported Outcomes for Research in a Learning Healthcare System.

PubMed

Harle, Christopher A; Lipori, Gloria; Hurley, Robert W

2016-01-01

Advances in health policy, research, and information technology have converged to increase the electronic collection and use of patient-reported outcomes (PROs). Therefore, it is important to share lessons learned in implementing PROs in research information systems. The purpose of this case study is to describe a novel information system for electronic PROs and lessons learned in implementing that system to support research in an academic health center. The system incorporates freely available and commercial software and involves clinical and research workflows that support the collection, transformation, and research use of PRO data. The software and processes that comprise the system serve three main functions, (i) collecting electronic PROs in clinical care, (ii) integrating PRO data with non-patient generated clinical data, and (iii) disseminating data to researchers through the institution's research informatics infrastructure, including the i2b2 (Informatics for Integrating Biology and the Bedside) system. Our successful design and implementation was driven by three overarching strategies. First, we selected and implemented multiple interfaced technologies to support PRO collection, management, and research use. Second, we aimed to use standardized approaches to measuring PROs, sending PROs between systems, and disseminating PROs. Finally, we focused on using technologies and processes that aligned with existing clinical research information management strategies within our organization. These experiences and lessons may help future implementers and researchers enhance the scale and sustainable use of systems for research use of PROs.

Using multimedia information and communication technology (ICT) to provide added value to reminiscence therapy for people with dementia : Lessons learned from three field studies.

PubMed

Bejan, Alexander; Gündogdu, Ramazan; Butz, Katherina; Müller, Nadine; Kunze, Christophe; König, Peter

2018-01-01

In the care of people with dementia (PwD), occupational therapies and activities aiming at maintaining the quality of life of PwD, such as reminiscence therapy (RT), are taking on a more and more important role. Information and communication technology (ICT) has the potential to improve and to facilitate RT by facilitating access to and selection of biographical information and related contents or by providing novel multimodal interaction forms to trigger memories; however, interactive multimedia technology is barely used in practice. This article presents three exploratory field studies that evaluated different aspects of RT technology use for PwD in care homes, including the utilization of online movie databases, interactive surface touch computers as well as natural user interfaces allowing gestures and haptic interaction. In these studies, the usage of prototype systems was observed in occupational sessions by 5, 12 and 16 PwD. The results indicate positive effects of technology use, e. g. in the form of verbally elicited reminiscence statements, expressed joy and playful interaction. Lessons learned for the design of technology-based RT interventions are presented and discussed.

Exploring the role of curriculum materials to support teachers in science education reform

NASA Astrophysics Data System (ADS)

Schneider, Rebecca M.

2001-07-01

For curriculum materials to succeed in promoting large-scale science education reform, teacher learning must be supported. Materials were designed to reflect desired reforms and to be educative by including detailed lesson descriptions that addressed necessary content, pedagogy, and pedagogical content knowledge for teachers. The goal of this research was to describe how such materials contributed to classroom practices. As part of an urban systemic reform effort, four middle school teachers' initial enactment of an inquiry-based science unit on force and motion were videotaped. Enactments focused on five lesson sequences containing experiences with phenomena, investigation, technology use, or artifact development. Each sequence spanned three to five days across the 10-week unit. For each lesson sequence, intended and actual enactment were compared using ratings of (1) accuracy and completeness of science ideas presented, (2) amount student learning opportunities, similarity of learning opportunities with those intended, and quality of adaptations , and (3) amount of instructional supports offered, appropriateness of instructional supports and source of ideas for instructional supports. Ratings indicated two teachers' enactments were consistent with intentions and two teachers' enactments were not. The first two were in school contexts supportive of the reform. They purposefully used the materials to guide enactment, which tended to be consistent with standards-based reform. They provided students opportunities to use technology tools, design investigations, and discuss ideas. However, enactment ratings were less reflective of curriculum intent when challenges were greatest, such as when teachers attempted to present challenging science ideas, respond to students' ideas, structure investigations, guide small-group discussions, or make adaptations. Moreover, enactment ratings were less consistent in parts of lessons where materials did not include lesson specific educative supports for teachers. Overall, findings indicate curriculum materials that include detailed descriptions of lessons accompanied by educative features can help teachers with enactment. Therefore, design principles to improve materials to support teachers in reform are suggested. However, results also demonstrate materials alone are not sufficient to create intended enactments; reform efforts must include professional development in content and pedagogy and efforts to create systemic change in context and policy to support teacher learning and classroom enactment.

Governance of nanotechnology and nanomaterials: principles, regulation, and renegotiating the social contract.

PubMed

Kimbrell, George A

2009-01-01

Good governance for nanotechnology and nanomaterials is predicated on principles of general good governance. This paper discusses on what lessons we can learn from the oversight of past emerging technologies in formulating these principles. Nanotechnology provides us a valuable opportunity to apply these lessons and a duty to avoid repeating past mistakes. To do that will require mandatory regulation, grounded in precaution, that takes into account the uniqueness of nanomaterials. Moreover, this policy dialogue is not taking place in a vacuum. In applying the lessons of the past, nanotechnology provides a window to renegotiate our public's social contract on chemicals, health, the environment, and risks. Emerging technologies illuminate structural weaknesses, providing a crucial chance to ameliorate lingering regulatory inadequacies and provide much needed updates of existing laws.

Lessons learned in deploying software estimation technology and tools

NASA Technical Reports Server (NTRS)

Panlilio-Yap, Nikki; Ho, Danny

1994-01-01

Developing a software product involves estimating various project parameters. This is typically done in the planning stages of the project when there is much uncertainty and very little information. Coming up with accurate estimates of effort, cost, schedule, and reliability is a critical problem faced by all software project managers. The use of estimation models and commercially available tools in conjunction with the best bottom-up estimates of software-development experts enhances the ability of a product development group to derive reasonable estimates of important project parameters. This paper describes the experience of the IBM Software Solutions (SWS) Toronto Laboratory in selecting software estimation models and tools and deploying their use to the laboratory's product development groups. It introduces the SLIM and COSTAR products, the software estimation tools selected for deployment to the product areas, and discusses the rationale for their selection. The paper also describes the mechanisms used for technology injection and tool deployment, and concludes with a discussion of important lessons learned in the technology and tool insertion process.

Lessons learned during the development and transfer of technology related to a new Hib conjugate vaccine to emerging vaccine manufacturers.

PubMed

Hamidi, A; Boog, C; Jadhav, S; Kreeftenberg, H

2014-07-16

The incidence of Haemophilus Influenzae type b (Hib) disease in developed countries has decreased since the introduction of Hib conjugate vaccines in their National Immunization Programs (NIP). In countries where Hib vaccination is not applied routinely, due to limited availability and high cost of the vaccines, invasive Hib disease is still a cause of mortality. Through the development of a production process for a Hib conjugate vaccine and related quality control tests and the transfer of this technology to emerging vaccine manufacturers in developing countries, a substantial contribution was made to the availability and affordability of Hib conjugate vaccines in these countries. Technology transfer is considered to be one of the fastest ways to get access to the technology needed for the production of vaccines. The first Hib conjugate vaccine based on the transferred technology was licensed in 2007, since then more Hib vaccines based on this technology were licensed. This paper describes the successful development and transfer of Hib conjugate vaccine technology to vaccine manufacturers in India, China and Indonesia. By describing the lessons learned in this process, it is hoped that other technology transfer projects can benefit from the knowledge and experience gained. Copyright © 2014 Elsevier Ltd. All rights reserved.

Technology Integration in Science Classrooms: Framework, Principles, and Examples

ERIC Educational Resources Information Center

Kim, Minchi C.; Freemyer, Sarah

2011-01-01

A great number of technologies and tools have been developed to support science learning and teaching. However, science teachers and researchers point out numerous challenges to implementing such tools in science classrooms. For instance, guidelines, lesson plans, Web links, and tools teachers can easily find through Web-based search engines often…

Alcoa North American Extrusions Implements Energy Use Assessments at Multiple Facilities: Office of Industrial Technologies (OIT) BestPractices Aluminum Assessment Case Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

U.S. Department of Energy

2001-08-05

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Strategies for the 21st Century: Integrating Technology into the ABLE Environment.

ERIC Educational Resources Information Center

Mingle, Mary E. H.

Integrating technology into the Adult Basic Literacy Education (ABLE) classroom can be very helpful to students and teachers, but it requires a shift in the teacher's role. The idea of "delivering" instruction--teacher-centered classes or tutor-directed lessons--should be replaced with student-centered, self-paced learning. Although the first…

Imaginative Use of Nonbroadcast Technology Directs Social Services to Isolated Audiences.

ERIC Educational Resources Information Center

Erdman, Ann

1981-01-01

The keynote article in this issue summarizes some of the lessons learned after a decade of using satellites for public service, and after five years of experimentation with information technologies designed for specialized audiences. Community service programs in the Appalachian Mountain and Rocky Mountain regions and in the state of Alaska are…

Robotics: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Auer, Herbert J.

This instructional manual contains 20 learning activity packets for use in a workshop on robotics. The lessons cover the following topics: safety considerations in robotics; introduction to technology-level and coordinate-systems categories; the teach pendant (a hand-held computer, usually attached to the robot controller, with which the operator…

Investigating Technology-Enhanced Teacher Professional Development in Rural, High-Poverty Middle Schools

ERIC Educational Resources Information Center

Blanchard, Margaret R.; LePrevost, Catherine E.; Tolin, A. Dell; Gutierrez, Kristie S.

2016-01-01

This 3-year, mixed-methods study investigated the effects of teacher technology-enhanced professional development (TPD) on 20 teachers' beliefs and practices. Teachers in two middle schools located in neighboring rural, high-poverty districts in the southeastern United States participated in reform-based lessons and learned how to integrate…

Integrating Assistive Technology into Teacher Education Programs: Trials, Tribulations, and Lessons Learned

ERIC Educational Resources Information Center

Van Laarhoven, Toni; Munk, Dennis D.; Chandler, Lynette K.; Zurita, Leslie; Lynch, Kathleen

2012-01-01

This article describes several stages in the integration of assistive technology (AT) into and across the curriculum of a teacher education program. The multi-year initiative included several projects and strategies that differentially affected faculty ability to integrate training and evaluation in using AT in their coursework. All strategies…

Changing Methods and Mindsets: Lessons from Innovate NYC

ERIC Educational Resources Information Center

Hodas, Steven

2016-01-01

As schools and classrooms explore technology-based, student-centered, personalized approaches to teaching and learning, their efforts to innovate can be hamstrung by archaic district operating systems that do not allow them to take advantage of new technologies, to work with smaller startup companies, or to quickly make and implement decisions.…

Lessons from New Zealand: Developing Student Voices with Technology

ERIC Educational Resources Information Center

Charles, Mike; Burt, Dorothy; Williams, Mia Kim

2011-01-01

Thirteen members of ISTE's Special Interest Group for Teacher Educators (SIGTE) traveled to Auckland, Rotorua, and Christchurch to visit seven schools and present and attend the Learning@School 2010 conference as part of a travel tour last February. This second installment about their trip features ways they saw technology used in New Zealand to…

Leveraging Technology in Adult Education

ERIC Educational Resources Information Center

Inverso, Diane C.; Kobrin, Jennifer; Hashmi, Shazia

2017-01-01

At the Office of Adult Education in Philadelphia, they are excited about technology and its potential to advance the field. In this article, the authors, drawing from lessons learned from programs they have developed and supported and their own experiences as lifelong learners, consider the roles of access to the internet, one-to-one device…

Students Taking Charge: Inside the Learner-Active, Technology-Infused Classroom

ERIC Educational Resources Information Center

Sulla, Nancy

2011-01-01

Teachers and administrators who recognize the needs of today's society and students, and their impact on teaching and learning, can use this book to create student-centered classrooms that make technology a vital part of their lessons. Filled with practical examples and step-by-step guidelines, "Students Taking Charge" will help educators design…

Integrating Bar-Code Medication Administration Competencies in the Curriculum: Implications for Nursing Education and Interprofessional Collaboration.

PubMed

Angel, Vini M; Friedman, Marvin H; Friedman, Andrea L

This article describes an innovative project involving the integration of bar-code medication administration technology competencies in the nursing curriculum through interprofessional collaboration among nursing, pharmacy, and computer science disciplines. A description of the bar-code medication administration technology project and lessons learned are presented.

NASA Access Mechanism: Lessons learned document

NASA Technical Reports Server (NTRS)

Burdick, Lisa; Dunbar, Rick; Duncan, Denise; Generous, Curtis; Hunter, Judy; Lycas, John; Taber-Dudas, Ardeth

1994-01-01

The six-month beta test of the NASA Access Mechanism (NAM) prototype was completed on June 30, 1993. This report documents the lessons learned from the use of this Graphical User Interface to NASA databases such as the NASA STI Database, outside databases, Internet resources, and peers in the NASA R&D community. Design decisions, such as the use of XWindows software, a client-server distributed architecture, and use of the NASA Science Internet, are explained. Users' reactions to the interface and suggestions for design changes are reported, as are the changes made by the software developers based on new technology for information discovery and retrieval. The lessons learned section also reports reactions from the public, both at demonstrations and in response to articles in the trade press and journals. Recommendations are included for future versions, such as a World Wide Web (WWW) and Mosaic based interface to heterogeneous databases, and NAM-Lite, a version which allows customization to include utilities provided locally at NASA Centers.

Land mobile radio system phase I pilot report

DOT National Transportation Integrated Search

2003-12-15

This report presents an executive summary, the project overview, Intelligent Transportation System standards and lessons learned for implementation of an Integrated Voice and Data, Land Mobile Radio System (ITS technologies for the Alaska Department ...

Avatar Web-Based Self-Report Survey System Technology for Public Health Research: Technical Outcome Results and Lessons Learned

PubMed Central

Savel, Craig; Mierzwa, Stan; Gorbach, Pamina M.; Souidi, Samir; Lally, Michelle; Zimet, Gregory; Interventions, AIDS

2016-01-01

This paper reports on a specific Web-based self-report data collection system that was developed for a public health research study in the United States. Our focus is on technical outcome results and lessons learned that may be useful to other projects requiring such a solution. The system was accessible from any device that had a browser that supported HTML5. Report findings include: which hardware devices, Web browsers, and operating systems were used; the rate of survey completion; and key considerations for employing Web-based surveys in a clinical trial setting. PMID:28149445

Technology in Education. The Progress of Education Reform, 2006. Volume 6, Number 6

ERIC Educational Resources Information Center

Weiss, Suzanne

2006-01-01

For policymakers, educators and others interested in learning more about the one-to-one computing movement, this issue of "The Progress of Education Reform" spotlights three particularly useful resources: (1) a detailed review of the challenges faced by states and districts implementing laptop programs, and of lessons learned to date in…

Learning Science in a Virtual Reality Application: The Impacts of Animated-Virtual Actors' Visual Complexity

ERIC Educational Resources Information Center

Kartiko, Iwan; Kavakli, Manolya; Cheng, Ken

2010-01-01

As the technology in computer graphics advances, Animated-Virtual Actors (AVAs) in Virtual Reality (VR) applications become increasingly rich and complex. Cognitive Theory of Multimedia Learning (CTML) suggests that complex visual materials could hinder novice learners from attending to the lesson properly. On the other hand, previous studies have…

Enhancing the Learning and Retention of Biblical Languages for Adult Students

ERIC Educational Resources Information Center

Morse, MaryKate

2004-01-01

Finding ways to reduce students' anxiety and maximize the value of learning Greek and Hebrew is a continual challenge for biblical language teachers. Some language teachers use technology tools such as web sites or CDs with audio lessons to improve the experience. Though these tools are helpful, this paper explores the value gained from…

Diving beneath the Surface: Underwater Robotics Lessons Bring STEM to Life for Teachers in Guam

ERIC Educational Resources Information Center

Tweed, Anne; Arndt, Laura

2017-01-01

In spring 2014, education leaders from across Micronesia came together on the island of Guam to learn about underwater robotics and Marine Advanced Technology Education (MATE), a program based at Monterey Peninsula College in Monterey, California. Participants listened intently as they learned about building and participating in competitions with…

Teaching Biology at a Distance: Pleasures, Pitfalls, and Possibilities

ERIC Educational Resources Information Center

MacQueen, Hilary; Thomas, Jeff

2009-01-01

The Open University (OU) has a long and distinguished history of teaching biology at a distance by a supported open learning model. This article examines some of the challenges in delivering biology via distance teaching, explores some of the lessons learned, and discusses the opportunities and hazards of new teaching technologies that the OU has…

Trends and Lessons Learned in Interdisciplinary and Non-Business Case Method Application.

ERIC Educational Resources Information Center

Anyansi-Archibong, Chi; Czuchry, Andrew J.; House, Claudia S.; Cicirello, Tony

2000-01-01

Presents results of a survey designed to test the level of development and application of cases in non-business courses such as sciences, mathematics, engineering, health, and technology. Findings support the growing popularity of the case method of teaching and learning outside the business domain. Suggests a framework for establishing win-win…

Integration of a mobile-integrated therapy with electronic health records: lessons learned.

PubMed

Peeples, Malinda M; Iyer, Anand K; Cohen, Joshua L

2013-05-01

Responses to the chronic disease epidemic have predominantly been standardized in their approach to date. Barriers to better health outcomes remain, and effective management requires patient-specific data and disease state knowledge be presented in methods that foster clinical decision-making and patient self-management. Mobile technology provides a new platform for data collection and patient-provider communication. The mobile device represents a personalized platform that is available to the patient on a 24/7 basis. Mobile-integrated therapy (MIT) is the convergence of mobile technology, clinical and behavioral science, and scientifically validated clinical outcomes. In this article, we highlight the lessons learned from functional integration of a Food and Drug Administration-cleared type 2 diabetes MIT into the electronic health record (EHR) of a multiphysician practice within a large, urban, academic medical center. In-depth interviews were conducted with integration stakeholder groups: mobile and EHR software and information technology teams, clinical end users, project managers, and business analysts. Interviews were summarized and categorized into lessons learned using the Architecture for Integrated Mobility® framework. Findings from the diverse stakeholder group of a MIT-EHR integration project indicate that user workflow, software system persistence, environment configuration, device connectivity and security, organizational processes, and data exchange heuristics are key issues that must be addressed. Mobile-integrated therapy that integrates patient self-management data with medical record data provides the opportunity to understand the potential benefits of bidirectional data sharing and reporting that are most valuable in advancing better health and better care in a cost-effective way that is scalable for all chronic diseases. © 2013 Diabetes Technology Society.

Implementing CDIO project-based learning in training of Heat and Power engineers

NASA Astrophysics Data System (ADS)

Boiko, E. A.; Shishmarev, P. V.; Karabarin, D. I.; Yanov, S. R.; Pikalova, A. A.

2017-11-01

This paper presents the experience and current results of CDIO standards implementation in training of bachelors in Heat and Power Engineering at Thermal Power Stations academic department in Siberian Federal University. It provides information on methodology of modernization of educational programs, curricula and programs of disciplines in transition to CDIO project-based learning technology. Preliminary assessment and analysis of lessons learned and scaling perspectives are given.

A Message Exchange Protocol in Command and Control Systems Integration, using the JC3IEDM

DTIC Science & Technology

2014-06-01

19TH International Command and Control Research and Technology Symposium C2 Agility: Lessons Learned from Research and Operations. A Message...distribution unlimited 13. SUPPLEMENTARY NOTES Presented at the 18th International Command & Control Research & Technology Symposium (ICCRTS) held 16...presents approaches of integration, compares their technologies , points out their advantages, proposes requirements, and provides the design of a protocol

Lessons learned from case studies of inhalation exposures of workers to radioactive aerosols

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoover, M.D.; Fencl, A.F.; Newton, G.J.

1995-12-01

Various Department of Energy requirements, rules, and orders mandate that lessons learned be identified, evaluated, shared, and incorporated into current practices. The recently issued, nonmandatory DOE standard for Development of DOE Lessons Learned Program states that a DOE-wide lessons learned program will {open_quotes}help to prevent recurrences of negative experiences, highlight best practices, and spotlight innovative ways to solve problems or perform work more safely, efficiently, and cost effectively.{close_quotes} Additional information about the lessons learned program is contained in the recently issued DOE handbook on Implementing U.S. Department of Energy Lessons Learned Programs and in October 1995 DOE SAfety Notice onmore » Lessons Learned Programs. This report summarizes work in progress at ITRI to identify lessons learned for worker exposures to radioactive aerosols, and describes how this work will be incorporated into the DOE lessons learned program, including a new technical guide for measuring, modeling, and mitigating airborne radioactive particles. Follow-on work is focusing on preparation of {open_quotes}lessons learned{close_quotes} training materials for facility designers, managers, health protection professionals, line supervisors, and workers.« less

Using Technology to Facilitate Differentiated High School Science Instruction

NASA Astrophysics Data System (ADS)

Maeng, Jennifer L.

2017-10-01

This qualitative investigation explored the beliefs and practices of one secondary science teacher, Diane, who differentiated instruction and studied how technology facilitated her differentiation. Diane was selected based on the results of a previous study, in which data indicated that Diane understood how to design and implement proactively planned, flexible, engaging instructional activities in response to students' learning needs better than the other study participants. Data for the present study included 3 h of semi-structured interview responses, 37.5 h of observations of science instruction, and other artifacts such as instructional materials. This variety of data allowed for triangulation of the evidence. Data were analyzed using a constant comparative approach. Results indicated that technology played an integral role in Diane's planning and implementation of differentiated science lessons. The technology-enhanced differentiated lessons employed by Diane typically attended to students' different learning profiles or interest through modification of process or product. This study provides practical strategies for science teachers beginning to differentiate instruction, and recommendations for science teacher educators and school and district administrators. Future research should explore student outcomes, supports for effective formative assessment, and technology-enhanced readiness differentiation among secondary science teachers.

Impact of Personal Computing on Education.

ERIC Educational Resources Information Center

McIsaac, Donald N.

1979-01-01

Describes microcomputers, outlines lessons learned from the evolution of other technologies as they apply to the development of the microcomputer, discusses computer literacy as a problem-solving tool, and speculates about microcomputer use in instruction and administration. (IRT)

Impact assessment of the smart roadside initiative (SRI) prototype - final report.

DOT National Transportation Integrated Search

2016-12-01

This report summarizes the independent assessment of the effectiveness and lessons learned from roadside motor carrier compliance systems including assessment of the Smart Roadside Initiative (SRI) Prototype and other SRI-like technologies. The locat...

FTA low-speed urban Maglev research program : updated lessons learned.

DOT National Transportation Integrated Search

2012-11-01

In 1999, the Federal Transit Administration (FTA) initiated the Low-Speed Urban Magnetic Levitation (Urban Maglev) Program to develop magnetic levitation technology that offers a cost-effective, reliable, and environmentally-sound transit option for ...

Intelligent transportation systems benefits, costs, and lessons learned : 2005 update

DOT National Transportation Integrated Search

2005-05-01

Intelligent Transportation Systems (ITS) technologies offer a clear opportunity to improve transportation safety, relieve congestion, and enhance productivity. This report is a continuation of a series of reports providing a synthesis of the informat...

Update from C3RS lessons learned team : four demonstration pilots.

DOT National Transportation Integrated Search

2014-07-01

The Federal Railroad Administration (FRA) believes that, in addition to process and technology innovations, human-factors-based solutions can significantly contribute to improving safety in the railroad industry. To test this assumption, FRA implemen...

Intravenous medication safety and smart infusion systems: lessons learned and future opportunities.

PubMed

Keohane, Carol A; Hayes, Judy; Saniuk, Catherine; Rothschild, Jeffrey M; Bates, David W

2005-01-01

The Institute of Medicine report To Err Is Human: Building a Safe Health System greatly increased national awareness of the need to improve patient safety in general and medication safety in particular. Infusion-related errors are associated with the greatest risk of harm, and "smart" (computerized) infusion systems are currently available that can avert high-risk errors and provide previously unavailable data for continuous quality improvement (CQI) efforts. As healthcare organizations consider how to invest scarce dollars, infusion nurses have a key role to play in assessing need, evaluating technology, and selecting and implementing specific products. This article reviews the need to improve intravenous medication safety. It describes smart infusion systems and the results they have achieved. Finally, it details the lessons learned and the opportunities identified through the use of smart infusion technology at Brigham and Women's Hospital in Boston, Massachusetts.

Conducting Planetary Field Geology on EVA: Lessons from the 2010 DRATS Geologist Crewmembers

NASA Technical Reports Server (NTRS)

Young, Kelsey E.; Bleacher, J. E.; Hurtado, J. M., Jr.; Rice, J.; Garry, W. B.; Eppler, D.

2011-01-01

In order to prepare for the next phase of planetary surface exploration, the Desert Research and Technology Studies (DRATS) field program seeks to test the next generation of technology needed to explore other surfaces. The 2010 DRATS 14-day field campaign focused on the simultaneous operation of two habitatable rovers, or Space Exploration Vehicles (SEVs). Each rover was crewed by one astronaut/commander and one geologist, with a change in crews on day seven of the mission. This shift change allowed for eight crew members to test the DRATS technology and operational protocols [1,2]. The insights presented in this abstract represent the crew s thoughts on lessons learned from this field season, as well as potential future testing concepts.

Historical problem areas: Lessons learned for expendable and reusable vehicle propulsion systems

NASA Technical Reports Server (NTRS)

Fester, Dale A.

1991-01-01

The following subject areas are covered: expendable launch vehicle lessons learned, upper stage/transfer vehicle lessons learned, shuttle systems - reuse, and reusable system issues and lessons learned.

Integration and Testing Challenges of Small, Multiple Satellite Missions: Experiences From The Space Technology 5 Project

NASA Technical Reports Server (NTRS)

Sauerwein, Timothy A.; Gostomski, Thomas

2007-01-01

This brief presentation describes the mechanical and electrical integration activities and environmental testing challenges of the Space Technology 5 (ST5) Project. Lessons learned during this process are highlighted, including performing mechanical activities serially to gain efficiency through repetition and performing electrical activities based on the level of subsystem expertise available.

Brilliant Ideas for Using ICT in the Inclusive Classroom. David Fulton/Nasen

ERIC Educational Resources Information Center

McKeown, Sally; McGlashon, Angela

2012-01-01

This practical teachers' guide will help you to unlock the enormous potential of new technology in order to enhance pupils' learning, particularly for young people with additional needs. Written by two of the UK's leading technology experts, this new resource will enable you to use ICT effectively to make lessons more accessible, motivating and…

Centralized, Decentralized, Distributed: Disruptive Technology in Distance Education, from "Sunrise Semester" to Present-Day MOOCs

ERIC Educational Resources Information Center

Flouty, Rosanna Noelle

2016-01-01

Lessons from early academic television courses from the 1950s guide an assessment of current disruptive technologies that shape Massive Open Online Courses (known as MOOCs) and other informal online learning opportunities today. This dissertation explores some of the unique contributing factors that led to the creation of "Sunrise…

Integration of Informal Music Technologies in Secondary School Music Lessons

ERIC Educational Resources Information Center

Stowell, Dan; Dixon, Simon

2014-01-01

Technologies such as YouTube, mobile phones and MP3 players are increasingly integrated into secondary school music in the UK. At the same time, the gap between formal and informal music learning is being bridged by the incorporation of students' preferred music into class activities. We conducted an ethnographic study in two secondary schools in…

Tapping Technology in Creating Product Development Studies: Reflections on an ESP-Business Project

ERIC Educational Resources Information Center

Yeh, Aiden

2015-01-01

This paper describes a teacher's reflections on a technology-enhanced project-based learning approach to teaching an ESP-business lesson on product development, which is part of the curriculum for Conference English and Meetings Practice (CEMP), a business-track course for the Adult Continuing Education program at a private university in southern…

Learning Methods for Efficient Adoption of Contemporary Technologies in Architectural Design

ERIC Educational Resources Information Center

Mahdavinejad, Mohammadjavad; Dehghani, Sohaib; Shahsavari, Fatemeh

2013-01-01

The interaction between technology and history is one of the most significant issues in achieving an efficient and progressive architecture in any era. This is a concept which stems from lesson of traditional architecture of Iran. Architecture as a part of art, has permanently been transforming just like a living organism. In fact, it has been…

Towards a TPACK-Fostering ICT Instructional Process for Teachers: Lessons from the Implementation of Interactive Whiteboard Instruction

ERIC Educational Resources Information Center

Koh, Joyce Hwee Ling; Divaharan, Shanti

2013-01-01

This paper describes an on-going design-based research project that aims to develop an instructional process to facilitate pre-service teachers' technological pedagogical content knowledge (TPACK) development as they learn to integrate information and communication technology (ICT) in their teaching content subjects. In conjunction with an…

[A Study on the Cognitive Learning Effectiveness of Scenario-Based Concept Mapping in a Neurological Nursing Course].

PubMed

Pan, Hui-Ching; Hsieh, Suh-Ing; Hsu, Li-Ling

2015-12-01

The multiple levels of knowledge related to the neurological system deter many students from pursuing studies on this topic. Thus, in facing complicated and uncertain medical circumstances, nursing students have diffi-culty adjusting and using basic neurological-nursing knowledge and skills. Scenario-based concept-mapping teaching has been shown to promote the integration of complicated data, clarify related concepts, and increase the effectiveness of cognitive learning. To investigate the effect on the neurological-nursing cognition and learning attitude of nursing students of a scenario-based concept-mapping strategy that was integrated into the neurological nursing unit of a medical and surgical nursing course. This quasi-experimental study used experimental and control groups and a pre-test / post-test design. Sopho-more (2nd year) students in a four-year program at a university of science and technology in Taiwan were convenience sampled using cluster randomization that was run under SPSS 17.0. Concept-mapping lessons were used as the intervention for the experimental group. The control group followed traditional lesson plans only. The cognitive learning outcome was measured using the neurological nursing-learning examination. Both concept-mapping and traditional lessons significantly improved post-test neurological nursing learning scores (p < .001), with no significant difference between the two groups (p = .51). The post-test feedback from the control group mentioned that too much content was taught and that difficulties were experienced in understanding mechanisms and in absorbing knowledge. In contrast, the experimental group held a significantly more positive perspective and learning attitude with regard to the teaching material. Furthermore, a significant number in the experimental group expressed the desire to add more lessons on anatomy, physiology, and pathology. These results indicate that this intervention strategy may help change the widespread fear and refusal of nursing students with regard to neurological lessons and may facilitate interest and positively affect learning in this important subject area. Integrating the concept-mapping strategy and traditional clinical-case lessons into neurological nursing lessons holds the potential to increase post-test scores significantly. Concept mapping helped those in the experimental group adopt views and attitudes toward learning the teaching material that were more positive than those held by their control-group peers. In addition, while 59% of the experimental group and 49% of the control group submitted opinions related to learning attitude in the open-ended questions, positive feedback was greater in the experimental group than in the control group.

Design Experiments in Japanese Elementary Science Education with Computer Support for Collaborative Learning: Hypothesis Testing and Collaborative Construction

ERIC Educational Resources Information Center

Oshima, Jun; Oshima, Ritsuko; Murayama, Isao; Inagaki, Shigenori; Takenaka, Makiko; Nakayama, Hayashi; Yamaguchi, Etsuji

2004-01-01

This paper reports design experiments on two Japanese elementary science lesson units in a sixth-grade classroom supported by computer support for collaborative learning (CSCL) technology as a collaborative reflection tool. We took different approaches in the experiments depending on their instructional goals. In the unit 'air and how things…

In-App Reflection Guidance: Lessons Learned Across Four Field Trials at the Workplace

ERIC Educational Resources Information Center

Fessl, Angela; Wesiak, Gudrun; Rivera-Pelayo, Verónica; Feyertag, Sandra; Pammer, Viktoria

2017-01-01

This paper presents a concept for in-app reflection guidance and its evaluation in four work-related field trials. By synthesizing across four field trials, we can show that computer-based reflection guidance can function in the workplace, in the sense of being accepted as technology, being perceived as useful and leading to reflective learning.…

Corporate Energy Conservation Program for Alcoa North American Extrusions

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2001-08-01

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Evolution of intelligent transportation systems for mobility management and coordination serving California's rural frontier.

DOT National Transportation Integrated Search

2012-01-01

This report documents the evolution, development, and lessons learned while attempting to identify, modify, and deploy Intelligent Transportation System (ITS) and advanced technology tools to facilitate coordination of public transit and social (huma...

FTA Low-speed urban maglev research program lessons learned : March 2009.

DOT National Transportation Integrated Search

2009-03-01

In 1999, the Federal Transit Administration initiated the Low-Speed Urban Magnetic Levitation (UML) Program to develop magnetic levitation technology that offers a cost effective, reliable, and environmentally sound transit option for urban mass tran...

Animated software training via the internet: lessons learned

NASA Technical Reports Server (NTRS)

Scott, C. J.

2000-01-01

The Mission Execution and Automation Section, Information Technologies and Software Systems Division at the Jet Propulsion Laboratory, recently delivered an animated software training module for the TMOD UPLINK Consolidation Task for operator training at the Deep Space Network.

Update from C3RS lessons learned team : safety culture and trend analysis.

DOT National Transportation Integrated Search

2014-07-01

The Federal Railroad Administration (FRA) believes that, in addition to process and technology innovations, human-factors-based solutions can significantly contribute to improving safety in the railroad industry. To test this assumption, FRA implemen...

Sharing lessons learned and best practices in deactivation and decommissioning techniques among U.S. Department of Energy contractors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lackey, Michael B.; Waisley, Sandra L.; Dusek, Lansing G.

2007-07-01

Approximately $153.2 billion of work currently remains in the United States Department of Energy's (DOE's) Office of Environmental Management (EM) life cycle budget for United States projects. Contractors who manage facilities for the DOE have been challenged to identify transformational changes to reduce the life cycle costs and develop a knowledge management system that identifies, disseminates, and tracks the implementation of lessons learned and best practices. At the request of the DOE's EM Office of Engineering and Technology, the Energy Facility Contractors Group (EFCOG) responded to the challenge with formation of the Deactivation and Decommissioning (D and D) and Facilitymore » Engineering (DD/FE) Working Group. Since October 2006, members have already made significant progress in realizing their goals: adding new D and D best practices to the existing EFCOG Best Practices database; participating in lessons learned forums; and contributing to a DOE initiative on identifying technology needs. The group is also participating in a DOE project management initiative to develop implementation guidelines, as well as a DOE radiation protection initiative to institute a more predictable and standardized approach to approving authorized limits and independently verifying cleanup completion at EM sites. Finally, a D and D hotline to provide real-time solutions to D and D challenges is also being launched. (authors)« less

Back to the future: personal digital assistants in nursing education.

PubMed

McLeod, Renee P; Mays, Mary Z

2008-12-01

This article provides an overview of the current state of the art for incorporating personal digital assistants (PDAs) into nursing education. The development of PDA technology and the lessons learned by educators integrating PDA technology into nursing curricula are described. The current cycle of PDA evolution is discussed and contrasted with a proposed model for maximizing the impact of PDAs on technological innovation in nursing education and practice.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keller, Elizabeth James Kistin; Warren, Drake; Hess, Marguerite Evelyn

This study examines the structure and impact of state-funded technology maturation programs that leverage research institutions for economic development throughout the United States. The lessons learned and practices identified from previous experiences will inform Sandia National Laboratories' Government Relations and Technology Partnerships teams as they participate in near-term discussions about the proposed Technology Readiness Gross Receipts Tax Credit and Program, and continue to shape longer-term program and partnership opportunities. This Page Intentionally Left Blank

The Challenge of the Seamless Force: The Role of Informal Networks in Battlespace

DTIC Science & Technology

2005-06-01

10th International Command and Control Research and Technology Symposium THE FUTURE OF C2 Symposium Theme: Lessons Learned Title: The... Technology Organisation Fern Hill Park Department of Defence Canberra ACT 2600 AUSTRALIA Phone +61 2 6256 6219 Fax +61 2 6256 6233...Email Leoni.Warne@dsto.defence.gov.au Derek Bopping Defence Science and Technology Organisation Fern Hill Park Department of Defence Canberra

The Value of Identifying and Recovering Lost GN&C Lessons Learned: Aeronautical, Spacecraft, and Launch Vehicle Examples

NASA Technical Reports Server (NTRS)

Dennehy, Cornelius J.; Labbe, Steve; Lebsock, Kenneth L.

2010-01-01

Within the broad aerospace community the importance of identifying, documenting and widely sharing lessons learned during system development, flight test, operational or research programs/projects is broadly acknowledged. Documenting and sharing lessons learned helps managers and engineers to minimize project risk and improve performance of their systems. Often significant lessons learned on a project fail to get captured even though they are well known 'tribal knowledge' amongst the project team members. The physical act of actually writing down and documenting these lessons learned for the next generation of NASA GN&C engineers fails to happen on some projects for various reasons. In this paper we will first review the importance of capturing lessons learned and then will discuss reasons why some lessons are not documented. A simple proven approach called 'Pause and Learn' will be highlighted as a proven low-impact method of organizational learning that could foster the timely capture of critical lessons learned. Lastly some examples of 'lost' GN&C lessons learned from the aeronautics, spacecraft and launch vehicle domains are briefly highlighted. In the context of this paper 'lost' refers to lessons that have not achieved broad visibility within the NASA-wide GN&C CoP because they are either undocumented, masked or poorly documented in the NASA Lessons Learned Information System (LLIS).

Learning to teach secondary mathematics using an online learning system

NASA Astrophysics Data System (ADS)

Cavanagh, Michael; Mitchelmore, Michael

2011-12-01

We report the results of a classroom study of three secondary mathematics teachers who had no prior experience teaching with technology as they began to use an online mathematics learning system in their lessons. We gave the teachers only basic instruction on how to operate the system and then observed them intensively over four school terms as they taught using it. We documented changes in the teachers' Pedagogical Technology Knowledge and subsequently classified their various roles as technology bystanders, adopters, adaptors and innovators. Results show that all teachers made some progress toward using the system in more sophisticated ways, but the improvements were not uniform across the teachers. We suggest possible reasons to explain the variation and discuss some implications for teacher professional development.

Some aerodynamic discoveries and related NACA/NASA research programs following World War 2

NASA Technical Reports Server (NTRS)

Spearman, M. L.

1984-01-01

The World War 2 time period ushered in a new era in aeronautical research and development. The air conflict during the war highlighted the need of aircraft with agility, high speed, long range, large payload capability, and in addition, introduced a new concept in air warfare through the use of guided missiles. Following the war, the influx of foreign technology, primarily German, led to rapid advances in jet propulsion and speed, and a host of new problem areas associated with high-speed flight designs were revealed. The resolution of these problems led to a rash of new design concepts and many of the lessons learned, in principle, are still effective today. In addition to the technical lessons learned related to aircraft development programs, it might also be noted that some lessons involving the political and philosophical nature of aircraft development programs are worth attention.

Working toward equitable opportunities for science students with disabilities: using professional development and technology.

PubMed

Bargerhuff, Mary Ellen; Cowan, Heidi; Kirch, Susan A

2010-01-01

As a result of federal legislation, adolescents with disabilities and other exceptionalities are increasingly included in science and math classes alongside their peers who are typically developing. The effectiveness of this placement option, however, is largely dependent on the skill level of the general educator and the support afforded to this teacher through various channels. Efforts arising from two National Science Foundation grants address both skill and support. Center's Lesson Adaptations for Student Success (CLASS) project used summer professional development opportunities to equip teachers with the knowledge and skills needed to provide students with physical, sensory and learning disabilities equitable access to laboratory and field experiences. Second, to support teachers back in their classrooms, the Ohio Resource Center's Lesson Adaptations for Student Success (OR-CLASS) uses web resources to share high quality, peer-reviewed lesson plans, complete with specific recommendations on adaptations for students with a variety of exceptional learning needs.

The Kinematic Learning Model using Video and Interfaces Analysis

NASA Astrophysics Data System (ADS)

Firdaus, T.; Setiawan, W.; Hamidah, I.

2017-09-01

An educator currently in demand to apply the learning to not be separated from the development of technology. Educators often experience difficulties when explaining kinematics material, this is because kinematics is one of the lessons that often relate the concept to real life. Kinematics is one of the courses of physics that explains the cause of motion of an object, Therefore it takes the thinking skills and analytical skills in understanding these symptoms. Technology is one that can bridge between conceptual relationship with real life. A framework of technology-based learning models has been developed using video and interfaces analysis on kinematics concept. By using this learning model, learners will be better able to understand the concept that is taught by the teacher. This learning model is able to improve the ability of creative thinking, analytical skills, and problem-solving skills on the concept of kinematics.

Asphalt recycling technology: Literature review and research plan

NASA Astrophysics Data System (ADS)

Newcomb, D. E.; Epps, J. A.

1981-06-01

A review of current technology for the rehabilitation and maintenance of pavement surfaces by recycling was conducted. While the primary concern was asphalt concrete recycling, a brief review of portland cement concrete recycling is included. Reports of cases involving recycling technology and lessons learned are reviewed. Recommendations are presented outlining research required to advance the state-of-the-art in a manner that will permit the U.S. Air Force to fully attain the benefits of recycling technology.

History of nuclear technology development in Japan

NASA Astrophysics Data System (ADS)

Yamashita, Kiyonobu

2015-04-01

Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

History of nuclear technology development in Japan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamashita, Kiyonobu, E-mail: yamashita.kiyonobu@jaea.go.jp; General Advisor Nuclear HRD Centre, Japan Atomic Energy Agency, TOKAI-mura, NAKA-gun, IBARAKI-ken, 319-1195

2015-04-29

Nuclear technology development in Japan has been carried out based on the Atomic Energy Basic Act brought into effect in 1955. The nuclear technology development is limited to peaceful purposes and made in a principle to assure their safety. Now, the technologies for research reactors radiation application and nuclear power plants are delivered to developing countries. First of all, safety measures of nuclear power plants (NPPs) will be enhanced based on lesson learned from TEPCO Fukushima Daiichi NPS accident.

DOE-GTO Low Temperture Projects Evaluation and Lessons Learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williams, Tom; Snyder, Neil; Gosnold, Will

2017-05-01

This paper discusses opportunities and challenges related to the technical and economic feasibility of developing power generation from geothermal resources at temperatures of 150 degrees C and lower. Insights from projects funded by the U.S. Department of Energy (DOE), Geothermal Technologies Office inform these discussions and provide the basis for some lessons learned to help guide decisions by DOE and the industry in further developing this resource. The technical basis for low-temperature geothermal energy is well established and the systems can be economic today in certain situations. However, these applications are far from a 'plug and play' product; successful developmentmore » today requires a good knowledge of geothermal system design and operation.« less

Using Mobile & Personal Sensing Technologies to Support Health Behavior Change in Everyday Life: Lessons Learned

PubMed Central

Klasnja, Predrag; Consolvo, Sunny; McDonald, David W.; Landay, James A.; Pratt, Wanda

2009-01-01

Lifestyle modification is a key facet of the prevention and management of chronic diseases. Mobile devices that people already carry provide a promising platform for facilitating these lifestyle changes. This paper describes key lessons learned from the development and evaluation of two mobile systems for encouraging physical activity. We argue that by supporting persistent cognitive activation of health goals, encouraging an extensive range of relevant healthy behaviors, focusing on long-term patterns of activity, and facilitating social support as an optional but not primary motivator, systems can be developed that effectively motivate behavior change and provide support when and where people make decisions that affect their health. PMID:20351876

The World Wide Web as a Medium of Instruction: What Works and What Doesn't

NASA Technical Reports Server (NTRS)

McCarthy, Marianne; Grabowski, Barbara; Hernandez, Angel; Koszalka, Tiffany; Duke, Lee

1997-01-01

A conference was held on March 18-20, 1997 to investigate the lessons learned by the Aeronautics Cooperative Agreement Projects with regard to the most effective strategies for developing instruction for the World Wide Web. The conference was a collaboration among the NASA Aeronautics and Space Transportation Technology Centers (Ames, Dryden, Langley, and Lewis), NASA Headquarters, the University of Idaho and The Pennsylvania State University. The conference consisted of presentations by the Aeronautics Cooperative Agreement Teams, the University of Idaho, and working sessions in which the participants addressed teacher training and support, technology, evaluation and pedagogy. The conference was also undertaken as part of the Dryden Learning Technologies Project which is a collaboration between the Dryden Education Office and The Pennsylvania State University. The DFRC Learning Technology Project goals relevant to the conference are as follows: conducting an analysis of current teacher needs, classroom infrastructure and exemplary instructional World Wide Web sites, and developing models for Web-enhanced learning environments that optimize teaching practices and student learning.

Paint Bucket Polygons

ERIC Educational Resources Information Center

Edwards, Michael Todd; Harper, Suzanne R.

2010-01-01

During a two-week summer professional development workshop, teams of intermediate-level school teachers and college methods instructors crafted mathematics learning modules--activities, lesson plans, work sheets, and technology-oriented tasks--with the primary goal of strengthening students' understanding of various geometric concepts. They recast…

Alcoa North American Extrusions Implements Energy Use Assessments at Multiple Facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2001-08-01

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

Historical problem areas lessons learned

NASA Technical Reports Server (NTRS)

Sackheim, Bob; Fester, Dale A.

1991-01-01

Historical problem areas in space transportation propulsion technology are identified in viewgraph form. Problem areas discussed include materials compatibility, contamination, pneumatic/feed system flow instabilities, instabilities in rocket engine combustion and fuel sloshing, exhaust plume interference, composite rocket nozzle failure, and freeze/thaw damage.

Leveraging Information Technology. Track VI: Hardware/Software Strategies.

ERIC Educational Resources Information Center

CAUSE, Boulder, CO.

Seven papers from the 1987 CAUSE conference's Track VI, Hardware/Software Strategies, are presented. They include: "Integrated Systems--The Next Steps" (Morris A. Hicks); "Administrative Microcomputing--Roads Traveled, Lessons Learned" (David L. Smallen); "Murphy's First Law and Its Application to Administrative…

A Risk Mitigation Model: Lessons Learned From Actual Insider Sabotage

DTIC Science & Technology

2006-11-07

performance Responsibilities removed from projects Suspension of Internet access Death in family ; Divorce Financial Disagreement re: salary/compensation...Infrastructure by Information Technology Insiders, ” Monterrey , CA.: Defense Personnel Security Research and Education Center. Shaw, E.D. (2004). “The

Lessons Learned about the Methodology of Economic Impact Studies: The NIST Experience.

ERIC Educational Resources Information Center

Tassey, Gregory

1999-01-01

Summarizes ongoing economic impact assessment activities at the National Institute of Standards and Technology (NIST) for its Measurement and Standards Laboratory Program. Explores designing economic impact studies for integration into assessments of broader programmatic objectives. (SLD)

Facing the Challenges--Using Information and Communications Technology To Support Teaching and Learning.

ERIC Educational Resources Information Center

Heaney, Liam

2003-01-01

This article explores some of the key issues associated with the use of information and communications technology (ICT) in the classroom. To illustrate ICT integration, a teaching project on dinosaurs, which has been developed with students ages 10-11, is presented. A detailed scheme of work and lesson plans is included. (Contains 4 references.)…

Debunking the Computer Science Digital Library: Lessons Learned in Collection Development at Seneca College of Applied Arts & Technology

ERIC Educational Resources Information Center

Buczynski, James Andrew

2005-01-01

Developing a library collection to support the curriculum of Canada's largest computer studies school has debunked many myths about collecting computer science and technology information resources. Computer science students are among the heaviest print book and e-book users in the library. Circulation statistics indicate that the demand for print…

Using Touch-Screen Technology, Apps, and Blogs to Engage and Sustain High School Students' Interest in Chemistry Topics

ERIC Educational Resources Information Center

Kim, Heejoo; Chacko, Priya; Zhao, Jinhui; Montclare, Jin Kim

2014-01-01

As part of an outreach program, we integrated chemistry apps with blogging to enhance the learning experience of students in and outside the classroom. Our outreach program involved college mentors who participated in the development and implementation of chemistry lessons alongside the classroom teacher. Three technology-rich modules that focused…

The Multimedia Dictionary of American Sign Language: Learning Lessons About Language, Technology, and Business.

ERIC Educational Resources Information Center

Wilcox, Sherman

2003-01-01

Reports on the the Multimedia Dictionary of American Sign language, which was was conceived in he late 1980s as a melding of the pioneering work in American Sign language lexicography that had been carried out decades earlier and the newly emerging computer technologies that were integrating use of graphical user-interface designs, rapidly…

Technology test bed review

NASA Technical Reports Server (NTRS)

Mcconnaughey, H. V.

1992-01-01

The topics are presented in viewgraph form and include the following: (1) Space Shuttle Main Engine (SSME) technology test bed (TTB) history; (2) TTB objectives; (3) TTB major accomplishments; (4) TTB contributions to SSME; (5) major impacts of 3001 testing; (6) some challenges to computational fluid dynamics (CFD); (7) the high pressure fuel turbopump (HPFTP); and (8) 3001 lessons learned in design and operations.

Lessons from Providing Professional Development in Remote Sensing for Community College Instructors

NASA Astrophysics Data System (ADS)

Allen, J. E.

2014-12-01

Two-year colleges and Tribal colleges are important centers for workforce education and training. A professional development program funded by the National Science Foundation's Advanced Technological Education Program, 2007-2011 and 2012-2015, is providing the resources needed by instructors at those colleges to develop courses and programs in remote sensing. The highly successful program, "Integrated Geospatial Education and Technology Training-Remote Sensing (iGETT-RS)" will complete its currently funded work in May 2015. 76 instructors of Geographic Information Systems (GIS) from all over the country will have been served. Each of them will have spent 18 months on the project, participating in two Summer Institutes at NASA and USGS and in monthly webinars on science and technology of remote sensing. iGETT-RS participants have created their own exercises and "concept modules" for the classroom, and many have created new courses and new programs across the country. As the external evaluator for iGETT-RS expressed it, the impact on project participants can "only be described as transformational." Viewers of this presentation will learn about the iGETT-RS project design and approach; successes, failures and lessons learned by the staff; and how to access the workshop materials and participant-authored classroom resources. Viewers will also learn about the Geospatial Technology Competency Model at the US Department of Labor, and about specifications for the Remote Sensing Model Course recently developed by the National Geospatial Technology Center to provide invaluable frameworks for faculty, students, administrators and employers.

EDSN Development Lessons Learned

NASA Technical Reports Server (NTRS)

Chartres, James; Sanchez, Hugo S.; Hanson, John

2014-01-01

The Edison Demonstration of Smallsat Networks (EDSN) is a technology demonstration mission that provides a proof of concept for a constellation or swarm of satellites performing coordinated activities. Networked swarms of small spacecraft will open new horizons in astronomy, Earth observations and solar physics. Their range of applications include the formation of synthetic aperture radars for Earth sensing systems, large aperture observatories for next generation telescopes and the collection of spatially distributed measurements of time varying systems, probing the Earths magnetosphere, Earth-Sun interactions and the Earths geopotential. EDSN is a swarm of eight 1.5U Cubesats with crosslink, downlink and science collection capabilities developed by the NASA Ames Research Center under the Small Spacecraft Technology Program (SSTP) within the NASA Space Technology Mission Directorate (STMD). This paper describes the concept of operations of the mission and planned scientific measurements. The development of the 8 satellites for EDSN necessitated the fabrication of prototypes, Flatsats and a total of 16 satellites to support the concurrent engineering and rapid development. This paper has a specific focus on the development, integration and testing of a large number of units including the lessons learned throughout the project development.

Lessons Learned for Improving Spacecraft Ground Operations

NASA Technical Reports Server (NTRS)

Bell, Michael; Henderson, Gena; Stambolian, Damon

2013-01-01

NASA policy requires each Program or Project to develop a plan for how they will address Lessons Learned. Projects have the flexibility to determine how best to promote and implement lessons learned. A large project might budget for a lessons learned position to coordinate elicitation, documentation and archival of the project lessons. The lessons learned process crosses all NASA Centers and includes the contactor community. o The Office of The Chief Engineer at NASA Headquarters in Washington D.C., is the overall process owner, and field locations manage the local implementation. One tool used to transfer knowledge between program and projects is the Lessons Learned Information System (LLIS). Most lessons come from NASA in partnership with support contractors. A search for lessons that might impact a new design is often performed by a contractor team member. Knowledge is not found with only one person, one project team, or one organization. Sometimes, another project team, or person, knows something that can help your project or your task. Knowledge sharing is an everyday activity at the Kennedy Space Center through storytelling, Kennedy Engineering Academy presentations and through searching the Lessons Learned Information system. o Project teams search the lessons repository to ensure the best possible results are delivered. o The ideas from the past are not always directly applicable but usually spark new ideas and innovations. Teams have a great responsibility to collect and disseminate these lessons so that they are shared with future generations of space systems designers. o Leaders should set a goal for themselves to host a set numbers of lesson learned events each year and do more to promote multiple methods of lessons learned activities. o High performing employees are expected to share their lessons, however formal knowledge sharing presentation are not the norm for many employees.

On the Trail of History in Montana: Crossing Great Distances of Time and Place, Six Rural Teachers and Their Students Plunge Together into the Enduring Lessons of Lewis and Clark.

ERIC Educational Resources Information Center

Weeks, Denise Jarrett

2003-01-01

A project to help teachers use technology to enhance learning is tied to the Lewis and Clark Expedition bicentennial, to bring a sense of adventure to learning. Four examples of projects along the Montana section of the expedition's trail show how outdoor, experiential learning is enhanced by the use of global positioning systems, digital cameras,…

Hand Gesture and Mathematics Learning: Lessons From an Avatar.

PubMed

Cook, Susan Wagner; Friedman, Howard S; Duggan, Katherine A; Cui, Jian; Popescu, Voicu

2017-03-01

A beneficial effect of gesture on learning has been demonstrated in multiple domains, including mathematics, science, and foreign language vocabulary. However, because gesture is known to co-vary with other non-verbal behaviors, including eye gaze and prosody along with face, lip, and body movements, it is possible the beneficial effect of gesture is instead attributable to these other behaviors. We used a computer-generated animated pedagogical agent to control both verbal and non-verbal behavior. Children viewed lessons on mathematical equivalence in which an avatar either gestured or did not gesture, while eye gaze, head position, and lip movements remained identical across gesture conditions. Children who observed the gesturing avatar learned more, and they solved problems more quickly. Moreover, those children who learned were more likely to transfer and generalize their knowledge. These findings provide converging evidence that gesture facilitates math learning, and they reveal the potential for using technology to study non-verbal behavior in controlled experiments. Copyright © 2016 Cognitive Science Society, Inc.

SABER on Orbit Performance Evaluation and Lessons Learned

NASA Astrophysics Data System (ADS)

Jensen, Scott M.; Batty, J. Clair

2004-06-01

The Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument, launched into orbit December 7, 2001, utilized a miniature pulse-tube cryocooler to maintain the SABER focal plane assembly (FPA) at 75 K. The limited cooling capacity of the cryocooler necessitated the development of a new never before flown Fiber Support Technology (FiST) for supporting and thermally isolating the FPA. A very precise predictive thermal modeling effort to ensure successful operation was also needed due to the very small capacity margin of the cryocooler. A high performance thermal link that minimized the temperature difference between the FPA and the cryocooler cold block and also the mechanical dynamic loading on the fragile pulse tube was developed and space qualified. This paper presents a comparison of the thermal modeling predictions with on orbit measurements, and discusses the lessons learned concerning long term performance issues of thermal isolation systems which utilize cryocoolers for cooling focal plane assemblies (FPA's). The effect of ice deposition on the thermal blankets and other FPA cooled structures, as well as the lessons learned in dealing with this ice deposition, will also be presented.

Lessons learned using a values-engaged approach to attend to culture, diversity, and equity in a STEM program evaluation.

PubMed

Boyce, Ayesha S

2017-10-01

Evaluation must attend meaningfully and respectfully to issues of culture, race, diversity, power, and equity. This attention is especially critical within the evaluation of science, technology, engineering, and mathematics (STEM) educational programming, which has an explicit agenda of broadening participation. The purpose of this article is to report lessons learned from the implementation of a values-engaged, educative (Greene et al., 2006) evaluation within a multi-year STEM education program setting. This meta-evaluation employed a case study design using data from evaluator weekly systematic reflections, review of evaluation and program artifacts, stakeholder interviews, and peer review and assessment. The main findings from this study are (a) explicit attention to culture, diversity, and equity was initially challenged by organizational culture and under-developed evaluator-stakeholder professional relationship and (b) evidence of successful engagement of culture, diversity, and equity emerged in formal evaluation criteria and documents, and informal dialogue and discussion with stakeholders. The paper concludes with lessons learned and implications for practice. Copyright © 2017 Elsevier Ltd. All rights reserved.

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. As part of the NASA Technical Standards Program activities, engineering lessons learned datasets have been identified from a number of sources. These are being searched and screened for those having a relation to Technical Standards. This paper will address some of these Systems Engineering Lessons Learned and how they are being related to Technical Standards within the NASA Technical Standards Program, including linking to the Agency's Interactive Engineering Discipline Training Courses and the life cycle for a flight vehicle development program.

Developments at the Advanced Design Technologies Testbed

NASA Technical Reports Server (NTRS)

VanDalsem, William R.; Livingston, Mary E.; Melton, John E.; Torres, Francisco J.; Stremel, Paul M.

2003-01-01

A report presents background and historical information, as of August 1998, on the Advanced Design Technologies Testbed (ADTT) at Ames Research Center. The ADTT is characterized as an activity initiated to facilitate improvements in aerospace design processes; provide a proving ground for product-development methods and computational software and hardware; develop bridging methods, software, and hardware that can facilitate integrated solutions to design problems; and disseminate lessons learned to the aerospace and information technology communities.

The Perceived Impact of 1:1 iPad Implementation on Teaching and Learning: A Pedagogical Case Study

ERIC Educational Resources Information Center

Neaves, Amy Marie

2015-01-01

This study aimed to examine teachers' perceptions of technology and its impact on their lesson planning and implementation as well as student learning in a one-to-one iPad environment. While student achievement was an intended goal of the initiative, the evolving role of the teacher within this environment had a potentially large impact on its…

How the Montessori Upper Elementary and Adolescent Environment Naturally Integrates Science, Mathematics, Technology, and the Environment

ERIC Educational Resources Information Center

McNamara, John

2016-01-01

John McNamara shares his wisdom and humbly credits Camillo Grazzini, Jenny Höglund, and David Kahn for his growth in Montessori. Recognizing more than what he has learned from his mentors, he shares the lessons he has learned from his students themselves. Math, science, history, and language are so integrated in the curriculum that students…

Building electronic data infrastructure for comparative effectiveness research: accomplishments, lessons learned and future steps.

PubMed

Randhawa, Gurvaneet S

2014-11-01

There are large gaps in our knowledge on the potential impact of diagnostics and therapeutics on outcomes of patients treated in the real world. Comparative effectiveness research aims to fill these gaps to maximize effectiveness of these interventions. Health information technology has the potential to dramatically improve the practice of medicine and of research. This is an overview of about US$100 million of American Recovery and Reinvestment Act investment in 12 projects managed by the Agency for Healthcare Research and Quality to build an electronic clinical data infrastructure that connects research with healthcare delivery. The achievements and lessons learned from these projects provided a foundation for the National Patient-Centered Clinical Research Network (PCORnet)and will help to guide future infrastructure development needed to build an efficient, scalable and sustainable learning health system.

Lessons from Iowa : development of a 270 megawatt compressed air energy storage project in midwest Independent System Operator : a study for the DOE Energy Storage Systems Program.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Holst, Kent; Huff, Georgianne; Schulte, Robert H.

2012-01-01

The Iowa Stored Energy Park was an innovative, 270 Megawatt, $400 million compressed air energy storage (CAES) project proposed for in-service near Des Moines, Iowa, in 2015. After eight years in development the project was terminated because of site geological limitations. However, much was learned in the development process regarding what it takes to do a utility-scale, bulk energy storage facility and coordinate it with regional renewable wind energy resources in an Independent System Operator (ISO) marketplace. Lessons include the costs and long-term economics of a CAES facility compared to conventional natural gas-fired generation alternatives; market, legislative, and contract issuesmore » related to enabling energy storage in an ISO market; the importance of due diligence in project management; and community relations and marketing for siting of large energy projects. Although many of the lessons relate to CAES applications in particular, most of the lessons learned are independent of site location or geology, or even the particular energy storage technology involved.« less

Engineering Lessons Learned and Systems Engineering Applications

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.

2005-01-01

Systems Engineering is fundamental to good engineering, which in turn depends on the integration and application of engineering lessons learned and technical standards. Thus, good Systems Engineering also depends on systems engineering lessons learned from within the aerospace industry being documented and applied. About ten percent of the engineering lessons learned documented in the NASA Lessons Learned Information System are directly related to Systems Engineering. A key issue associated with lessons learned datasets is the communication and incorporation of this information into engineering processes. Systems Engineering has been defined (EINIS-632) as "an interdisciplinary approach encompassing the entire technical effort to evolve and verify an integrated and life-cycle balanced set of system people, product, and process solutions that satisfy customer needs". Designing reliable space-based systems has always been a goal for NASA, and many painful lessons have been learned along the way. One of the continuing functions of a system engineer is to compile development and operations "lessons learned" documents and ensure their integration into future systems development activities. They can produce insights and information for risk identification identification and characterization. on a new project. Lessons learned files from previous projects are especially valuable in risk

Lessons Learned in Engineering

NASA Technical Reports Server (NTRS)

Blair, J. C.; Ryan, R. S.; Schutzenhofer, L. A.

2011-01-01

This Contractor Report (CR) is a compilation of Lessons Learned in approximately 55 years of engineering experience by each James C. Blair, Robert S. Ryan, and Luke A. Schutzenhofer. The lessons are the basis of a course on Lessons Learned that has been taught at Marshall Space Flight Center. The lessons are drawn from NASA space projects and are characterized in terms of generic lessons learned from the project experience, which are further distilled into overarching principles that can be applied to future projects. Included are discussions of the overarching principles followed by a listing of the lessons associated with that principle. The lesson with sub-lessons are stated along with a listing of the project problems the lesson is drawn from, then each problem is illustrated and discussed, with conclusions drawn in terms of Lessons Learned. The purpose of this CR is to provide principles learned from past aerospace experience to help achieve greater success in future programs, and identify application of these principles to space systems design. The problems experienced provide insight into the engineering process and are examples of the subtleties one experiences performing engineering design, manufacturing, and operations.

Introducing new technologies into Space Station subsystems

NASA Technical Reports Server (NTRS)

Wiskerchen, Michael J.; Mollakarimi, Cindy L.

1989-01-01

A new systems engineering technology has been developed and applied to Shuttle processing. The new engineering approach emphasizes the identification, quantitative assessment, and management of system performance and risk related to the dynamic nature of requirements, technology, and operational concepts. The Space Shuttle Tile Automation System is described as an example of the first application of the new engineering technology. Lessons learned from the Shuttle processing experience are examined, and concepts are presented which are applicable to the design and development of the Space Station Freedom.

ESPRIT Technical Week, Information Technology Forum Day

DTIC Science & Technology

1990-06-15

Brussels, the Information Technology (IT) grams have functioned better because of the lessons Forum Day of the ESPRIT Technical Week is devoted to learned ...ONREUR Report 90_3-C 1 iLL WEIP DTIC ELECTE AUG 221990 99rU ESPRIT Technical Week, Information Technology Forum Day J.F. Blackburn I-I Lfl 15 June...Classification) ESPRIT Technical Week, Information Technology Forum Day 12 PERSONAL AUTHOR(S) J.F. Blackburn 13a TYPE or REPORT I13b TIME (.OVERED 14 DATE

Network-Centric Operations Support: Lessons Learned, Status, and Way-Ahead

DTIC Science & Technology

2014-06-01

34 Information Sharing Environment (ISE) Presentation, Enterprise Architecture Conference, 2011 (http://goveaconference.com/Events/2011/Sessions/ Tuesday ...cgi-bin/GetTRDoc?AD=ADA525312) [35] Morris , Michael, et al. Widget and Mobile Technologies a Forcing Function for Acquisition Change: Paradigm Shift

Teaching STEM by Design

ERIC Educational Resources Information Center

Billiar, Kristen; Hubelbank, Jeanne; Oliva, Thomas; Camesano, Terri

2014-01-01

Developing innovative science, technology, engineering and mathematics (STEM) curricula that elicit student excitement for learning is a continuous challenge for K-12 STEM teachers. Generating these lessons while meeting conflicting pedagogical objectives and constraints of time, content, and cost from various parties is truly a challenging task…

The STEAM-Powered Classroom

ERIC Educational Resources Information Center

Harper, Charlie

2017-01-01

An instructional coach argues that STEAM (science, technology, engineering, arts, and mathematics) programming combined with problem-based learning can offer rich academic experiences--and not just in science classrooms. He outlines relevant problem-based lesson ideas, and discusses ways school leaders can better support instructional practices…

Intelligent transportation systems for traffic signal control : deployment benefits and lessons learned

DOT National Transportation Integrated Search

2000-12-01

In this document, a group of authors looks back on the ten years of the national intelligent transportation systems program and examines which ITS technology applications have been successful, which have not been successful, and what are the underlyi...

Brentwood Lessons Learned Project Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rivkin, Carl H.; Caton, Melanie C.; Ainscough, Christopher D.

The purpose of this report is to document lessons learned in the installation of the hydrogen fueling station at the National Park Service Brentwood site in Washington, D.C., to help further the deployment of hydrogen infrastructure required to support hydrogen and other fuel cell technologies. Hydrogen fueling is the most difficult infrastructure component to build and permit. Hydrogen fueling can include augmenting hydrogen fueling capability to existing conventional fuel fueling stations as well as building brand new hydrogen fueling stations. This report was produced as part of the Brentwood Lessons Learned project. The project consisted of transplanting an existing modularmore » hydrogen fueling station from Connecticut to the National Park Service Brentwood site. This relocation required design and construction at the Brentwood site to accommodate the existing station design as well as installation and validation of the updated station. One of the most important lessons learned was that simply moving an existing modular station to an operating site was not necessarily straight-forward - performing the relocation required significant effort and cost. The station has to function at the selected operating site and this functionality requires a power supply, building supports connecting to an existing alarm system, electrical grounding and lighting, providing nitrogen for purging, and providing deionized water if an electrolyzer is part of the station package. Most importantly, the station has to fit into the existing site both spatially and operationally and not disrupt existing operations at the site. All of this coordination and integration requires logistical planning and project management. The idea that a hydrogen fueling station can be simply dropped onto a site and made immediately operational is generally not realistic. Other important lessons learned include that delineating the boundaries of the multiple jurisdictions that have authority over a project for all parties involved in the project are key to an efficient approval process; and site investigation is necessary when integrating a new station design onto an existing site, particularly an older existing site that may have limited documentation on the site history and operations. The lessons learned for permitting and subcontracting construction work can be applied to other similar sites and to commercial sites.« less

The Space Shuttle focused-technology program - Lessons learned

NASA Technical Reports Server (NTRS)

Fitzgerald, P. E., Jr.; Gabris, E. A.

1983-01-01

The results of a focused technology program (FTP), its management structure, the development of the Space Shuttle, and lessons applicable to future space programs such as a space station are discussed. A committee was formed by NASA in 1969 to define the technologies necessary for a reusable spacecraft. Basic and applied research assessments were featured at the beginning of the process. Working groups were established to cover all necessary areas, e.g., Operations, Structures and Materials, Aerothermodynamics, etc., and tasks were distributed to appropriate NASA centers. Funding was drawn from existing budgets. The FTP proceeded successfully because of an understanding of the respective roles of industry and government, the willingness of industry to invest early in a new technology, and the unclassified status of information generated by the program. The in-house design and technology transfer methods that brought the project to a technology demonstration phase are explored, noting the necessity for users to take part in the development within their field.

Evolution of technology in teaching: Blackboard and beyond in Medical Education

PubMed Central

Mendis, Susirith; John, Lisha Jenny; Shanthakumari, Nisha; Sreedharan, Jayadevan; Shaikh, Rizwana B

2016-01-01

Teaching and learning the passing of knowledge from one generation to another - has been in existence from the earliest times of human civilization. It began in 1801, with a large piece of slate hung on the wall in a school in Scotland to provide information to a large audience at one time. In the US by mid-19th century, every class room had a blackboard to teach students. The modern version of the blackboard is either green or brown board. This was introduced in late 1960s. The whiteboards came into use during the late 1980s. Projected aids have been used since 1420. The various devices used are the epidiascope, slide projector, overhead projector for transparencies and the micro projector. An instrument to project images from a horizontal surface onto a vertical screen was invented in the 1870s. By the 1960s, transparencies were in use in classrooms. The ‘Hyalotype’, a transparent image of a photograph using actual black and white photographs on a glass slide that could be projected was invented in 1851. By 1916, the German company Agfa started producing colored lantern slides. The first version of PowerPoint was released by Microsoft in the year 1990. Cell phones, palmtops, and handheld computers; tablets, laptops, and media players are included under mobile learning devices. With the evolution of technology, students achieved competence and interested in interactive learning. The education industry has moved from distance learning to e-learning and finally to m-learning as knowledge expanded exponentially and the demand escalated. While using teaching aids with advanced technology, we must not forget the lessons from the past, striking a balance between embracing new methods of teaching and learning while upholding the timeless principles of education. The newer educational technology can be part of a comprehensive system for lifelong education. Conclusion: Use of technology in education has come a long way since the earliest times of human civilization. While embarking on aids with advanced technology, we need to take full cognizance of the lessons from the past, striking a balance between embracing new methods of teaching and learning while holding on to the timeless principles of education. Thus, the newer educational technology can be effective tools of teaching and learning in this rapidly changing technological world and be part of a comprehensive system for lifelong education. Acknowledgements: The authors wish to acknowledge Prof. Raja Bandaranayake for his valuable suggestions and editing this manuscript. PMID:27822404

Lab to farm: applying research on plant genetics and genomics to crop improvement.

PubMed

Ronald, Pamela C

2014-06-01

Over the last 300 years, plant science research has provided important knowledge and technologies for advancing the sustainability of agriculture. In this Essay, I describe how basic research advances have been translated into crop improvement, explore some lessons learned, and discuss the potential for current and future contribution of plant genetic improvement technologies to continue to enhance food security and agricultural sustainability.

Measurement, Ratios, and Graphing: Safety First. A Lesson Guide with Activities in Mathematics, Science, and Technology. NASA CONNECT.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

NASA CONNECT is an annual series of free integrated mathematics, science, and technology instructional distance learning programs for students in grades 5-8. Each program has three components: (1) a 30-minute television broadcast which can be viewed live or taped for later use; (2) an interactive Web activity that allows teachers to integrate…

Blue Sky Below My Feet. Adventures in Space Technology, Forces, Fibers, Foods. 4-H Leader/Teacher Handbook.

ERIC Educational Resources Information Center

Manholt, Donna; And Others

This teaching guide for 4th through 6th grade classes integrates science, language arts, and math concepts into ready-to-use space and space technology lessons. Significant learning outcomes for this curriculum are linked to Ohio's educational objectives for science in an at-a-glance curriculum matrix. A summary of the significant 4-H life skills…

GPS Lessons Learned from the International Space Station, Space Shuttle and X-38

NASA Technical Reports Server (NTRS)

Goodman, John L.

2005-01-01

This document is a collection of writings concerning the application of Global Positioning System (GPS) technology to the International Space Station (ISS), Space Shuttle, and X-38 vehicles. An overview of how GPS technology was applied is given for each vehicle, including rationale behind the integration architecture, and rationale governing the use (or non-use) of GPS data during flight.

Preparing pre-service teachers to integrate technology into inquiry-based science education: Three case studies in The Netherlands

NASA Astrophysics Data System (ADS)

Tran, Trinh-Ba; van den Berg, Ed; Ellermeijer, Ton; Beishuizen, Jos

2016-05-01

Integration of technology ( e.g. measuring with sensors, video measurement, and modeling) into secondary-school science teaching is a need globally recognized. A central issue of incorporating these technologies in teaching is how to turn manipulations of equipment and software into manipulations of ideas. Therefore, preparation for pre-service teachers to apply ICT tools should be combined with the issues of minds-on inquiring and meaning-making. From this perspective, we developed a course within the post-graduate teacher-education program in the Netherlands. During the course, pre-service teachers learnt not only to master ICT skills but also to design, teach, and evaluate an inquiry-based lesson in which the ICT tool was integrated. Besides three life sessions, teachers' learning scenario also consisted of individual tasks which teachers could carry out mostly in the school or at home with support materials and online assistance. We taught three iterations of the course within a design-research framework in 2013, 2014 and collected data on the teacher learning processes and outcomes. The analyses of these data from observation, interviews, questionnaires, and documents were to evaluate implementation of the course, then suggest for revisions of the course set-up, which was executed and then assessed again in a subsequent case study. Main outcomes of the three case studies can be summarized as follows: within a limited time (3 life sessions spread over 2-3 months), the heterogeneous groups of pre-service teachers achieved a reasonable level of competence regarding the use of ICT tools in inquiry-based lessons. The blended set-up with support materials, especially the Coach activities and the lesson-plan form for an ICT-integrated inquiry-based lesson, contributed to this result under the condition that the course participants really spent considerable time outside the life sessions. There was a need for more time for hands-on, in-group activities in life sessions and more detailed feedback on individual reports of pre-service teachers. The majority of the pre-service teachers were able to design a lesson plan aimed at a certain inquiry level with integration of ICT, but just a few could implement it faithfully in the classroom. There was still a considerable difference between intended inquiry activities and actual realized inquiry which parallels results from the literature for experienced teachers. The participants had to struggle with science --ICT conceptual issues as well as getting their students to focus on inquiry and concept learning in the classroom. Each evaluation guided iteration of the course resulted in better learning outcomes.

Unmanned Ground Vehicle (UGV) Lessons Learned

DTIC Science & Technology

2001-11-01

iii 1. INTRODUCTION ....................................................................................................... 1 1.1... INTRODUCTION 1.1 PURPOSE The purpose of this effort is to compile Lessons Learned from the unmanned ground vehicle (UGV) programs that could be relevant to... introduction of gunpowder, this lesson was no longer valid. Castles crumbled and new lessons had to be learned. One such lesson was that the faster

Lesson Learning at JPL

NASA Technical Reports Server (NTRS)

Oberhettinger, David

2011-01-01

A lessons learned system is a hallmark of a mature engineering organization A formal lessons learned process can help assure that valuable lessons get written and published, that they are well-written, and that the essential information is "infused" into institutional practice. Requires high-level institutional commitment, and everyone's participation in gathering, disseminating, and using the lessons

77 FR 64565 - Solicitation of Feedback and Lessons-Learned from the Pilot of the Revised Construction Reactor...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-22

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0249] Solicitation of Feedback and Lessons-Learned from... or the Commission) is soliciting feedback and lessons-learned from members of the public, licensees... constructed in accordance with the licensing basis. The NRC has applied lessons- learned from the prior plants...

Connected Vehicle Pilot Deployment Program phase I : comprehensive Pilot Deployment Plan : Tampa Hillsborough Expressway Authority (THEA) : final report.

DOT National Transportation Integrated Search

2016-07-01

The Tampa Hillsborough Expressway Authority (THEA) Connected Vehicle (CV) Pilot Deployment Program is part of a national effort to advance CV technologies by deploying, demonstrating, testing and offering lessons learned for future deployers. The THE...

Power Factor Study Reduces Energy Costs at Aluminum Extrusion Plant (Alcoa North American Extrusions)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2001-08-01

This case study is the latest in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. The case studies document the activities, savings, and lessons learned on these projects.

What's Inside?

ERIC Educational Resources Information Center

Sigford, Ann; Nelson, Nancy

1998-01-01

Presents a program for elementary teachers to learn how to use hand tools and household appliances to teach the principles of physics. The lesson helps teachers become familiar with simple hand tools, combat the apprehension of mechanical devices, and develop an interest in tools and technology. Session involves disassembling appliances to…

Development of a Web-Based Health Care Intervention for Patients With Heart Disease: Lessons Learned From a Participatory Design Study

PubMed Central

2017-01-01

Background The use of telemedicine technologies in health care has increased substantially, together with a growing interest in participatory design methods when developing telemedicine approaches. Objective We present lessons learned from a case study involving patients with heart disease and health care professionals in the development of a personalized Web-based health care intervention. Methods We used a participatory design approach inspired by the method for feasibility studies in software development. We collected qualitative data using multiple methods in 3 workshops and analyzed the data using thematic analysis. Participants were 7 patients with diagnosis of heart disease, 2 nurses, 1 physician, 2 systems architects, 3 moderators, and 3 observers. Results We present findings in 2 parts. (1) Outcomes of the participatory design process: users gave valuable feedback on ease of use of the platforms’ tracking tools, platform design, terminology, and insights into patients’ monitoring needs, information and communication technologies skills, and preferences for self-management tools. (2) Experiences from the participatory design process: patients and health care professionals contributed different perspectives, with the patients using an experience-based approach and the health care professionals using a more attitude-based approach. Conclusions The essential lessons learned concern planning and organization of workshops, including the finding that patients engaged actively and willingly in a participatory design process, whereas it was more challenging to include and engage health care professionals. PMID:28526674

The use of think-aloud and instant data analysis in evaluation research: Exemplar and lessons learned.

PubMed

Joe, Jonathan; Chaudhuri, Shomir; Le, Thai; Thompson, Hilaire; Demiris, George

2015-08-01

While health information technologies have become increasingly popular, many have not been formally tested to ascertain their usability. Traditional rigorous methods take significant amounts of time and manpower to evaluate the usability of a system. In this paper, we evaluate the use of instant data analysis (IDA) as developed by Kjeldskov et al. to perform usability testing on a tool designed for older adults and caregivers. The IDA method is attractive because it takes significantly less time and manpower than the traditional usability testing methods. In this paper we demonstrate how IDA was used to evaluate usability of a multifunctional wellness tool, discuss study results and lessons learned while using this method. We also present findings from an extension of the method which allows the grouping of similar usability problems in an efficient manner. We found that the IDA method is a quick, relatively easy approach to identifying and ranking usability issues among health information technologies. Copyright © 2015 Elsevier Inc. All rights reserved.

Status Report and Lessons Learned from the Univ. of Arizona NMSD

NASA Technical Reports Server (NTRS)

Baiocchi, Dave; Burge, Jim

2003-01-01

We will present the latest generation of space mirror technology being developed at the Univ. of Arizona (UA). Unlike conventional monolithic mirrors, the UA mirrors are completely active in their operation. This allows greater flexibility in the mass, volume and performance specifications. The UA mirror design uses a thin flexible substrate for the optical surface and an actuated lightweight structure for surface accuracy and support. We provide an update on the UA NGST Mirror System Demonstrator (NMSD). The 2-m, f/5 NMSD mirror uses a 2 mm thick glass substrate and weighs 86 pounds. We review the mirror's design, discuss the mythology schemes used to actuate the figure, and present a list of the lessons learned.

Lessons Learned in Engineering. Supplement

NASA Technical Reports Server (NTRS)

Blair, James C.; Ryan, Robert S.; Schultzenhofer, Luke A.

2011-01-01

This Contractor Report (CR) is a compilation of Lessons Learned in approximately 55 years of engineering experience by each James C. Blair, Robert S. Ryan, and Luke A. Schutzenhofer. The lessons are the basis of a course on Lessons Learned that has been taught at Marshall Space Flight Center. The lessons are drawn from NASA space projects and are characterized in terms of generic lessons learned from the project experience, which are further distilled into overarching principles that can be applied to future projects. Included are discussions of the overarching principles followed by a listing of the lessons associated with that principle. The lesson with sub-lessons are stated along with a listing of the project problems the lesson is drawn from, then each problem is illustrated and discussed, with conclusions drawn in terms of Lessons Learned. The purpose of this CR is to provide principles learned from past aerospace experience to help achieve greater success in future programs, and identify application of these principles to space systems design. The problems experienced provide insight into the engineering process and are examples of the subtleties one experiences performing engineering design, manufacturing, and operations. The supplemental CD contains accompanying PowerPoint presentations.

Learning and Leading with Technology: A Case Study of Centennial Campus Magnet Middle School

ERIC Educational Resources Information Center

Morris-Bryant, Edye Darlene

2012-01-01

The purpose of this single case study is to describe and document the implementation of a 1:1 laptop program for a middle school with a unique school-university partnership. The goal of this study is two-fold; one being to describe the implementation of a 1:1 laptop program and to document the lessons learned in leading a 1:1 laptop program. This…

Lessons learned from facilitating the state and tribal government working group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurstedt, H.A. Jr.

1994-12-31

Thirteen lessons learned from my experience in facilitating the State and Tribal Government Working Group for the U.S. Department of Energy have been identified. The conceptual base for supporting the veracity of each lesson has been developed and the lessons are believed to be transferable to any stakeholder group. The crux of stakeholder group success if the two-directional, two-mode empowerment required in this case. Most of the lessons learned deal with the scope of that empowerment. A few of the lessons learned deal with the operations of the group.

77 FR 14446 - Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, “Buried and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-09

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0055] Changes to the Generic Aging Lessons Learned (GALL... Aging Lessons Learned (GALL) Report,'' and the NRC staff's aging management review procedure and... into ADAMS. II. Background The NRC issues LR-ISGs to communicate insights and lessons learned and to...

Learning from Lessons: Teachers' Insights and Intended Actions Arising from Their Learning about Student Thinking

ERIC Educational Resources Information Center

Roche, Anne; Clarke, Doug; Clarke, David; Chan, Man Ching Esther

2016-01-01

A central premise of this project is that teachers learn from the act of teaching a lesson and that this learning is evident in the planning and teaching of a subsequent lesson. We are studying the knowledge construction of mathematics teachers utilising multi-camera research techniques during lesson planning, classroom interactions and…

Visualizing the inner product space ℝm×n in a MATLAB-assisted linear algebra classroom

NASA Astrophysics Data System (ADS)

Caglayan, Günhan

2018-05-01

This linear algebra note offers teaching and learning ideas in the treatment of the inner product space ? in a technology-supported learning environment. Classroom activities proposed in this note demonstrate creative ways of integrating MATLAB technology into various properties of Frobenius inner product as visualization tools that complement the algebraic approach. As implemented in linear algebra lessons in a university in the Unites States, the article also incorporates algebraic and visual work of students who experienced these activities with MATLAB software. The connection between the Frobenius norm and the Euclidean norm is also emphasized.

ICRP publication 112. A report of preventing accidental exposures from new external beam radiation therapy technologies.

PubMed

Ortiz López, P; Cosset, J M; Dunscombe, P; Holmberg, O; Rosenwald, J C; Pinillos Ashton, L; Vilaragut Llanes, J J; Vatnitsky, S

2009-08-01

Disseminating the knowledge and lessons learned from accidental exposures is crucial in preventing re-occurrence. This is particularly important in radiation therapy; the only application of radiation in which very high radiation doses are deliberately given to patients to achieve cure or palliation of disease. Lessons from accidental exposures are, therefore, an invaluable resource for revealing vulnerable aspects of the practice of radiotherapy, and for providing guidance for the prevention of future occurrences. These lessons have successfully been applied to avoid catastrophic events with conventional technologies and techniques. Recommendations, for example, include the independent verification of beam calibration and independent calculation of the treatment times and monitor units for external beam radiotherapy, and the monitoring of patients and their clothes immediately after brachytherapy. New technologies are meant to bring substantial improvement to radiation therapy. However, this is often achieved with a considerable increase in complexity, which in turn brings opportunities for new types of human error and problems with equipment. Dissemination of information on these errors or mistakes as soon as it becomes available is crucial in radiation therapy with new technologies. In addition, information on circumstances that almost resulted in serious consequences (near-misses) is also important, as the same type of events may occur elsewhere. Sharing information about near-misses is thus a complementary important aspect of prevention. Lessons from retrospective information are provided in Sections 2 and 4 of this report. Disseminating lessons learned for serious incidents is necessary but not sufficient when dealing with new technologies. It is of utmost importance to be proactive and continually strive to answer questions such as 'What else can go wrong', 'How likely is it?' and 'What kind of cost-effective choices do I have for prevention?'. These questions are addressed in Sections 3 and 5 of this report. Section 6 contains the conclusions and recommendations. This report is expected to be a valuable resource for radiation oncologists, hospital administrators, medical physicists, technologists, dosimetrists, maintenance engineers, radiation safety specialists, and regulators. While the report applies specifically to new external beam therapies, the general principles for prevention are applicable to the broad range of radiotherapy practices where mistakes could result in serious consequences for the patient and practitioner.

Teacher Knowledge for Active-Learning Instruction: Expert-Novice Comparison Reveals Differences.

PubMed

Auerbach, A J; Higgins, M; Brickman, P; Andrews, T C

2018-01-01

Active-learning strategies can improve science, technology, engineering, and mathematics (STEM) undergraduates' abilities to learn fundamental concepts and skills. However, the results instructors achieve vary substantially. One explanation for this is that instructors commonly implement active learning differently than intended. An important factor affecting how instructors implement active learning is knowledge of teaching and learning. We aimed to discover knowledge that is important to effective active learning in large undergraduate courses. We developed a lesson-analysis instrument to elicit teacher knowledge, drawing on the theoretical construct of teacher noticing. We compared the knowledge used by expert ( n = 14) and novice ( n = 29) active-learning instructors as they analyzed lessons. Experts and novices differed in what they noticed, with experts more commonly considering how instructors hold students accountable, topic-specific student difficulties, whether the instructor elicited and responded to student thinking, and opportunities students had to generate their own ideas and work. Experts were also better able to support their lesson analyses with reasoning. This work provides foundational knowledge for the future design of preparation and support for instructors adopting active learning. Improving teacher knowledge will improve the implementation of active learning, which will be necessary to widely realize the potential benefits of active learning in undergraduate STEM. © 2018 A. J. Auerbach et al. CBE—Life Sciences Education © 2018 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

NYU3T: teaching, technology, teamwork: a model for interprofessional education scalability and sustainability.

PubMed

Djukic, Maja; Fulmer, Terry; Adams, Jennifer G; Lee, Sabrina; Triola, Marc M

2012-09-01

Interprofessional education is a critical precursor to effective teamwork and the collaboration of health care professionals in clinical settings. Numerous barriers have been identified that preclude scalable and sustainable interprofessional education (IPE) efforts. This article describes NYU3T: Teaching, Technology, Teamwork, a model that uses novel technologies such as Web-based learning, virtual patients, and high-fidelity simulation to overcome some of the common barriers and drive implementation of evidence-based teamwork curricula. It outlines the program's curricular components, implementation strategy, evaluation methods, and lessons learned from the first year of delivery and describes implications for future large-scale IPE initiatives. Copyright © 2012 Elsevier Inc. All rights reserved.

OC48 - Hurtology: an online course.

PubMed

Frechette, Casey; Frechette, Barbara

2016-05-09

Theme: School health. The prevalence of anxiety and depression suggests a need to improve on the mental health education of young people. The school setting can provide a venue for offering such knowledge to adolescents. This study explored whether a video game enhances lessons designed to help adolescents become more receptive to learning about mental health concepts. This study used a quantitative between-subjects design. The first group experienced a set of computer-based lessons. The second group received the same content, but also played a video game designed to reinforce topics explored in the other materials. The findings showed that game players demonstrated deeper learning on at least one measure. Helping adolescents develop better ways to understand the relevance of emotional health is a worthwhile endeavour. New technologies can be used to improve learning and help young people become more receptive to addressing mental health concerns.

A History of Aerospace Problems, Their Solutions, Their Lessons

NASA Technical Reports Server (NTRS)

Ryan, R. S.

1996-01-01

The positive aspect of problem occurrences is the opportunity for learning and a challenge for innovation. The learning aspect is not restricted to the solution period of the problem occurrence, but can become the beacon for problem prevention on future programs. Problems/failures serve as a point of departure for scaling to new designs. To ensure that problems/failures and their solutions guide the future programs, a concerted effort has been expended to study these problems, their solutions, their derived lessons learned, and projections for future programs. This includes identification of technology thrusts, process changes, codes development, etc. However, they must not become an excuse for adding layers upon layers of standards, criteria, and requirements, but must serve as guidelines that assist instead of stifling engineers. This report is an extension of prior efforts to accomplish this task. Although these efforts only scratch the surface, it is a beginning that others must complete.

Learning in the thick of it.

PubMed

Darling, Marilyn; Parry, Charles; Moore, Joseph

2005-01-01

The U.S. Army's Opposing Force (OPFOR) is a 2,500-member brigade whose job is to help prepare soldiers for combat. Created to be the meanest, toughest foe that soldiers will ever face, OPFOR engages units-in-training in a variety of mock campaigns under a wide range of conditions. Every month, a fresh brigade of more than 4,000 soldiers takes on this standing enemy. OPFOR, which is stationed in the California desert, always has the home-court advantage. But the force being trained--called BLU FOR--is numerically and technologically superior. It possesses more resources and better, more available data. It is made up of experienced soldiers. And it knows just what to expect, because OPFOR shares its methods from previous campaigns with BLUFOR's commanders. In short, each BLUFOR brigade is given practically every edge. Yet OPFOR almost always wins. Underlying OPFOR's consistent success is the way it uses the after-action review (AAR), a method for extracting lessons from one event or project and applying them to others. AAR meetings became a popular business tool after Shell Oil began experimenting with them in 1998. Most corporate AARs, however, are faint echoes of the rigorous reviews performed by OPFOR. Companies tend to treat the process as a pro-forma wrap-up, drawing lessons from an action but rarely learning them. OPFOR's AARs, by contrast, generate raw material that is fed back into the execution cycle. And while OPFOR's reviews extract numerous lessons, the brigade does not consider a lesson to be learned until it is successfully applied and validated. It might not make sense for companies to adopt OPFOR's AAR processes in their entirety, but four fundamentals are mandatory: Lessons must benefit the team that extracts them. The AAR process must start atthe beginning of the activity. Lessons must link explicitly to future actions. And leaders must hold everyone, especially themselves, accountable for learning.

Magnetic Field Measurements on the Lunar Surface: Lessons Learned from Apollo and Science Enabled by Future Missions

NASA Astrophysics Data System (ADS)

Chi, P. J.

2017-10-01

We discuss the science to be enabled by new magnetometer measurements on the lunar surface, based on results from Apollo and other lunar missions. Also discussed are approaches to deploying magnetometers on the lunar surface with today's technology.

LESSONS-LEARNED AND SUCCESS STORIES FROM EPA'S REAL-TIME ENVIRONMENTAL MONITORING, DATA DELIVERY, AND PUBLIC OUTREACH PROGRAM

EPA Science Inventory

TTSD has completed a series of technology transfer and risk communication handbooks, case studies, and summary reports for community-based environmental monitoring projects under EPA's Real-Time Environmental Monitoring, Data Delivery, and Public Outreach Program. The Program tak...

Towards a Unified Theory of Engineering Education

ERIC Educational Resources Information Center

Salcedo Orozco, Oscar H.

2017-01-01

STEM education is an interdisciplinary approach to learning where rigorous academic concepts are coupled with real-world lessons and activities as students apply science, technology, engineering, and mathematics in contexts that make connections between school, community, work, and the global enterprise enabling STEM literacy (Tsupros, Kohler and…

Programming Proficiency in One Semester: Lessons Learned

ERIC Educational Resources Information Center

Colton, Don; Curtis, Aaron

2010-01-01

Programming is a fundamental skill for Information Systems and Information Technology students. It is also a subject that some students fear, avoid, fail, retake, and fail again. An effective, inexpensive, one-semester approach is presented. Early indications suggest dramatically improved student interest and performance compared to our previous…

Photovoltaic: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Auer, Herbert J.

This instructional manual contains 11 learning activity packets for use in a workshop on photovoltaic converters. The lessons cover the following topics: introduction; solar radiation--input for photovoltaic converters; photovoltaic cells; solar electric generator systems; characteristics of silicon cells; photovoltaic module source resistance;…

Incorporating Collaborative Technologies into University Curricula: Lessons Learned

ERIC Educational Resources Information Center

Hunt, C. Steven; Smith, Lola B.; Chen, Minder

2010-01-01

Web-based collaboration tools and groupware are uniquely qualified to address the emerging business opportunities heretofore hindered by location barriers, constraints of time, and expensive travel costs. Global business enterprises are implementing online collaboration software to augment their face-to-face meetings and group decision making in…

Program Development for Disadvantaged High-Ability Students

ERIC Educational Resources Information Center

Kim, Mihyeon; Cross, Jennifer; Cross, Tracy

2017-01-01

Examining lessons learned through 4 years of experience of hosting Camp Launch, a university-based residential science, technology, engineering, and mathematics (STEM) enrichment program for low-income, high-ability, middle school students, this article explores components of the program and offers suggestions for implementing programs that serve…

Lessons Learned in Technology Transition (Briefing Charts)

DTIC Science & Technology

2011-02-01

recertification • Environmental regulations • Federal clean air act • OSHA and EPA requirements – Cadmium, hexavalent chromium, VOC reduction • ReaCH Copyright...Efforts • Non-Chromated Exterior System Non-chromated conversion coat and primer • Non- Chrome for other areas • Chemical topcoat reactivation Future

Supporting Shared Resource Usage for a Diverse User Community: the OSG Experience and Lessons Learned

NASA Astrophysics Data System (ADS)

Garzoglio, Gabriele; Levshina, Tanya; Rynge, Mats; Sehgal, Chander; Slyz, Marko

2012-12-01

The Open Science Grid (OSG) supports a diverse community of new and existing users in adopting and making effective use of the Distributed High Throughput Computing (DHTC) model. The LHC user community has deep local support within the experiments. For other smaller communities and individual users the OSG provides consulting and technical services through the User Support area. We describe these sometimes successful and sometimes not so successful experiences and analyze lessons learned that are helping us improve our services. The services offered include forums to enable shared learning and mutual support, tutorials and documentation for new technology, and troubleshooting of problematic or systemic failure modes. For new communities and users, we bootstrap their use of the distributed high throughput computing technologies and resources available on the OSG by following a phased approach. We first adapt the application and run a small production campaign on a subset of “friendly” sites. Only then do we move the user to run full production campaigns across the many remote sites on the OSG, adding to the community resources up to hundreds of thousands of CPU hours per day. This scaling up generates new challenges - like no determinism in the time to job completion, and diverse errors due to the heterogeneity of the configurations and environments - so some attention is needed to get good results. We cover recent experiences with image simulation for the Large Synoptic Survey Telescope (LSST), small-file large volume data movement for the Dark Energy Survey (DES), civil engineering simulation with the Network for Earthquake Engineering Simulation (NEES), and accelerator modeling with the Electron Ion Collider group at BNL. We will categorize and analyze the use cases and describe how our processes are evolving based on lessons learned.

Learning from Lessons: Studying the Construction of Teacher Knowledge Catalysed by Purposefully-Designed Experimental Mathematics Lessons

ERIC Educational Resources Information Center

Clarke, Doug; Clarke, David; Roche, Anne; Chan, Man Ching Esther

2015-01-01

A central premise of this project is that teachers learn from the act of teaching a lesson and that this learning is evident in the planning and teaching of a subsequent lesson. In this project, the knowledge construction of mathematics teachers was examined utilising multi-camera research techniques during lesson planning, classroom interactions…

Brownfields City of Cleveland: Deconstruction Lessons Learned Report

EPA Pesticide Factsheets

This technical memorandum presents an overview of Cleveland’s current deconstruction initiative goals and lessons learned (in the Cleveland area) and potential strategies for addressing lessons learned.

Evolution of technology in teaching: Blackboard and beyond in Medical Education.

PubMed

Muttappallymyalil, Jayakumary; Mendis, Susirith; John, Lisha Jenny; Shanthakumari, Nisha; Sreedharan, Jayadevan; Shaikh, Rizwana B

2016-10-01

the passing of knowledge from one generation to another - has been in existence from the earliest times of human civilization. It began in 1801, with a large piece of slate hung on the wall in a school in Scotland to provide information to a large audience at one time. In the US by mid-19th century, every class room had a blackboard to teach students. The modern version of the blackboard is either green or brown board. This was introduced in late 1960s. The whiteboards came into use during the late 1980s. Projected aids have been used since 1420. The various devices used are the epidiascope, slide projector, overhead projector for transparencies and the micro projector. An instrument to project images from a horizontal surface onto a vertical screen was invented in the 1870s. By the 1960s, transparencies were in use in classrooms. The 'Hyalotype', a transparent image of a photograph using actual black and white photographs on a glass slide that could be projected was invented in 1851. By 1916, the German company Agfa started producing colored lantern slides. The first version of PowerPoint was released by Microsoft in the year 1990. Cell phones, palmtops, and handheld computers; tablets, laptops, and media players are included under mobile learning devices. With the evolution of technology, students achieved competence and interested in interactive learning. The education industry has moved from distance learning to e-learning and finally to m-learning as knowledge expanded exponentially and the demand escalated. While using teaching aids with advanced technology, we must not forget the lessons from the past, striking a balance between embracing new methods of teaching and learning while upholding the timeless principles of education. The newer educational technology can be part of a comprehensive system for lifelong education. Use of technology in education has come a long way since the earliest times of human civilization. While embarking on aids with advanced technology, we need to take full cognizance of the lessons from the past, striking a balance between embracing new methods of teaching and learning while holding on to the timeless principles of education. Thus, the newer educational technology can be effective tools of teaching and learning in this rapidly changing technological world and be part of a comprehensive system for lifelong education. The authors wish to acknowledge Prof. Raja Bandaranayake for his valuable suggestions and editing this manuscript.

77 FR 46127 - Interim Staff Guidance on Changes to the Generic Aging Lessons Learned (GALL) Report Revision 2...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-02

... Aging Lessons Learned (GALL) Report Revision 2 AMP XI.M41, ``Buried and Underground Piping and Tanks... AMPs in NUREG-1801, Revision 2, ``Generic Aging Lessons Learned (GALL) Report,'' and the NRC staff's... issues LR-ISG to communicate insights and lessons learned and to address emergent issues not covered in...

[Overview of the US policies for health information technology and lessons learned for Israel].

PubMed

Topaz, Maxim; Ash, Nachman

2013-05-01

The heaLthcare system in the United States (U.S.) faces a number of significant changes aimed at improving the quality and availability of medical services and reducing costs. Implementation of health information technologies, especiaLly ELectronic Health Records (EHR), is central to achieving these goals. Several recent Legislative efforts in the U.S. aim at defining standards and promoting wide scale "Meaningful Use" of the novel technologies. In Israel, the majority of heaLthcare providers adopted EHR throughout the Last decade. Unlike the U.S., the process of EHR adoption occurred spontaneously, without governmental control or the definition of standards. In this article, we review the U.S. health information technology policies and standards and suggest potential lessons Learned for Israel. First, we present the three-staged Meaningful Use regulations that require eligible healthcare practitioners to use EHR in their practice. We also describe the standards for EHR certification and national efforts to create interoperable health information technology networks. Finally, we provide a brief overview of the IsraeLi regulation in the field of EHR. Although the adoption of health information technology is wider in Israel, the Lack of technology standards and governmental control has Led to Large technology gaps between providers. The example of the U.S. Legislation urges the adoption of several critical steps to further enhance the quality and efficiency of the Israeli healthcare system, in particular: strengthening health information technology regulation; developing Licensure criteria for health information technology; bridging the digital gap between healthcare organizations; defining quality measures; and improving the accessibility of health information for patients.

Cognitive and learning sciences in biomedical and health instructional design: A review with lessons for biomedical informatics education.

PubMed

Patel, Vimla L; Yoskowitz, Nicole A; Arocha, Jose F; Shortliffe, Edward H

2009-02-01

Theoretical and methodological advances in the cognitive and learning sciences can greatly inform curriculum and instruction in biomedicine and also educational programs in biomedical informatics. It does so by addressing issues such as the processes related to comprehension of medical information, clinical problem-solving and decision-making, and the role of technology. This paper reviews these theories and methods from the cognitive and learning sciences and their role in addressing current and future needs in designing curricula, largely using illustrative examples drawn from medical education. The lessons of this past work are also applicable, however, to biomedical and health professional curricula in general, and to biomedical informatics training, in particular. We summarize empirical studies conducted over two decades on the role of memory, knowledge organization and reasoning as well as studies of problem-solving and decision-making in medical areas that inform curricular design. The results of this research contribute to the design of more informed curricula based on empirical findings about how people learn and think, and more specifically, how expertise is developed. Similarly, the study of practice can also help to shape theories of human performance, technology-based learning, and scientific and professional collaboration that extend beyond the domain of medicine. Just as biomedical science has revolutionized health care practice, research in the cognitive and learning sciences provides a scientific foundation for education in biomedicine, the health professions, and biomedical informatics.

Software Engineering Research/Developer Collaborations in 2005

NASA Technical Reports Server (NTRS)

Pressburger, Tom

2006-01-01

In CY 2005, three collaborations between software engineering technology providers and NASA software development personnel deployed three software engineering technologies on NASA development projects (a different technology on each project). The main purposes were to benefit the projects, infuse the technologies if beneficial into NASA, and give feedback to the technology providers to improve the technologies. Each collaboration project produced a final report. Section 2 of this report summarizes each project, drawing from the final reports and communications with the software developers and technology providers. Section 3 indicates paths to further infusion of the technologies into NASA practice. Section 4 summarizes some technology transfer lessons learned. Also included is an acronym list.

Advanced Thermoplastic Polymers and Additive Manufacturing Applied to ISS Columbus Toolbox: Lessons Learnt and Results

NASA Astrophysics Data System (ADS)

Ferrino, Marinella; Secondo, Ottaviano; Sabbagh, Amir; Della Sala, Emilio

2014-06-01

In the frame of the International Space Station (ISS) Exploitation Program a new toolbox has been realized by TAS-I to accommodate the tools currently in use on the ISS Columbus Module utilizing full-scale prototypes obtained with 3D rapid prototyping. The manufacturing of the flight hardware by means of advanced thermoplastic polymer UL TEM 9085 and additive manufacturing Fused Deposition Modelling (FDM) technology represent innovative elements. In this paper, the results achieved and the lessons learned are analyzed to promote future technology know-how. The acquired experience confirmed that the additive manufacturing process allows to save time/cost and to realize new shapes/features to introduce innovation in products and future design processes for space applications.

Lab to Farm: Applying Research on Plant Genetics and Genomics to Crop Improvement

PubMed Central

Ronald, Pamela C.

2014-01-01

Over the last 300 years, plant science research has provided important knowledge and technologies for advancing the sustainability of agriculture. In this Essay, I describe how basic research advances have been translated into crop improvement, explore some lessons learned, and discuss the potential for current and future contribution of plant genetic improvement technologies to continue to enhance food security and agricultural sustainability. PMID:24915201

Bold endeavors: behavioral lessons from polar and space exploration

NASA Technical Reports Server (NTRS)

Stuster, J. W.

2000-01-01

Anecdotal comparisons frequently are made between expeditions of the past and space missions of the future. Spacecraft are far more complex than sailing ships, but from a psychological perspective, the differences are few between confinement in a small wooden ship locked in the polar ice cap and confinement in a small high-technology ship hurtling through interplanetary space. This paper discusses some of the behavioral lessons that can be learned from previous expeditions and applied to facilitate human adjustment and performance during future space expeditions of long duration.

Flying Lessons for Clinicians: Developing System 2 Practice.

PubMed

Gregoire, Jerome N; Alfes, Celeste M; Reimer, Andrew P; Terhaar, Mary F

There is a long history of adopting lessons learned from aviation to improve health care practice. Two of the major practices that have successfully transferred include using a checklist and simulation. Training and simulation technology is currently underdeveloped for nurses and health care providers entering critical care transport. This article describes a pedagogical approach adopted from aviation to develop a new simulation platform and program of research to develop the science of critical care transport nursing education. Copyright © 2017 Air Medical Journal Associates. Published by Elsevier Inc. All rights reserved.

Development of Engineering Design Education in the Department of Mechanical Engineering at Kanazawa Technical College

NASA Astrophysics Data System (ADS)

Yamada, Hirofumi; Ten-Nichi, Michio; Mathui, Hirosi; Nakamura, Akizi

This paper introduces a method of the engineering design education for college of technology mechanical engineering students. In order to teach the practical engineering design, the MIL-STD-499A process is adapted and improved upon for a Mechatronics hands-on lesson used as the MOT method. The educational results in five years indicate that knowledge of the engineering management is useful for college students in learning engineering design. Portfolio for lessons and the hypothesis method also have better effects on the understanding of the engineering specialty.

Additive Manufacturing Design Considerations for Liquid Engine Components

NASA Technical Reports Server (NTRS)

Whitten, Dave; Hissam, Andy; Baker, Kevin; Rice, Darron

2014-01-01

The Marshall Space Flight Center's Propulsion Systems Department has gained significant experience in the last year designing, building, and testing liquid engine components using additive manufacturing. The department has developed valve, duct, turbo-machinery, and combustion device components using this technology. Many valuable lessons were learned during this process. These lessons will be the focus of this presentation. We will present criteria for selecting part candidates for additive manufacturing. Some part characteristics are 'tailor made' for this process. Selecting the right parts for the process is the first step to maximizing productivity gains. We will also present specific lessons we learned about feature geometry that can and cannot be produced using additive manufacturing machines. Most liquid engine components were made using a two-step process. The base part was made using additive manufacturing and then traditional machining processes were used to produce the final part. The presentation will describe design accommodations needed to make the base part and lessons we learned about which features could be built directly and which require the final machine process. Tolerance capabilities, surface finish, and material thickness allowances will also be covered. Additive Manufacturing can produce internal passages that cannot be made using traditional approaches. It can also eliminate a significant amount of manpower by reducing part count and leveraging model-based design and analysis techniques. Information will be shared about performance enhancements and design efficiencies we experienced for certain categories of engine parts.

Thermal Control Technologies for Complex Spacecraft

NASA Technical Reports Server (NTRS)

Swanson, Theodore D.

2004-01-01

Thermal control is a generic need for all spacecraft. In response to ever more demanding science and exploration requirements, spacecraft are becoming ever more complex, and hence their thermal control systems must evolve. This paper briefly discusses the process of technology development, the state-of-the-art in thermal control, recent experiences with on-orbit two-phase systems, and the emerging thermal control technologies to meet these evolving needs. Some "lessons learned" based on experience with on-orbit systems are also presented.

Future sensor system needs for staring arrays

NASA Astrophysics Data System (ADS)

Miller, John Lester

2011-05-01

This is a systems application paper regarding how sensor systems may use future technology FPAs. A historical perspective is discussed along with lessons learned from previous technologies. Future system requirements for strained super-lattice (SLS), quantum dots (QDOT) and traditional quantum well infrared photo-diodes (QWIP) arrays will be presented from both a commercial and military perspective. New potential markets will open up in the future if certain FPA technologies can reduce cost and provide higher sensitivities at higher operating temperatures.

Doomed to Repeat It How the United States Air Force Can Apply History via Counterinsurgency Lessons Learned to Meet Anti-Access/Area Denial Challenges

DTIC Science & Technology

2012-08-01

technology used in the COIN fight are not readily transferable to conflicts against enemies using A2/AD tactics, such as heavy electromagnetic attack...particularly when matched against a technology advanced enemy. Technologies unsuitable for an opposed electromagnetic spectrum are unsurvivable...increased numbers of weapons systems such as the MQ-1, MQ-9, and MC-12. Additionally, open-ended deployments of ISR assets such as the RC-135 RIVET

Teacher Responses to Learning Cycle Science Lessons for Early Childhood Education

NASA Astrophysics Data System (ADS)

Kraemer, Emily N.

Three learning cycle science lessons were developed for preschoolers in an early childhood children's center in Costa Mesa, California. The lessons were field tested by both novice and experienced teachers with children ranging from three to five years old. Teachers were then interviewed informally to collect feedback on the structure and flow the lessons. The feedback was encouraging remarks towards the use of learning cycle science lessons for early childhood educators. Adjustments were made to the lessons based on teacher feedback. The lessons and their implications for preschool education are discussed.

The Network Operations Control Center upgrade task: Lessons learned

NASA Technical Reports Server (NTRS)

Sherif, J. S.; Tran, T.-L.; Lee, S.

1994-01-01

This article synthesizes and describes the lessons learned from the Network Operations Control Center (NOCC) upgrade project, from the requirements phase through development and test and transfer. At the outset, the NOCC upgrade was being performed simultaneously with two other interfacing and dependent upgrades at the Signal Processing Center (SPC) and Ground Communications Facility (GCF), thereby adding a significant measure of complexity to the management and overall coordination of the development and transfer-to-operations (DTO) effort. Like other success stories, this project carried with it the traditional elements of top management support and exceptional dedication of cognizant personnel. Additionally, there were several NOCC-specific reasons for success, such as end-to-end system engineering, adoption of open-system architecture, thorough requirements management, and use of appropriate off-the-shelf technologies. On the other hand, there were several difficulties, such as ill-defined external interfaces, transition issues caused by new communications protocols, ambivalent use of two sets of policies and standards, and mistailoring of the new JPL management standard (due to the lack of practical guidelines). This article highlights the key lessons learned, as a means of constructive suggestions for the benefit of future projects.

Formative questioning in computer learning environments: a course for pre-service mathematics teachers

NASA Astrophysics Data System (ADS)

Akkoç, Hatice

2015-11-01

This paper focuses on a specific aspect of formative assessment, namely questioning. Given that computers have gained widespread use in learning and teaching, specific attention should be made when organizing formative assessment in computer learning environments (CLEs). A course including various workshops was designed to develop knowledge and skills of questioning in CLEs. This study investigates how pre-service mathematics teachers used formative questioning with technological tools such as Geogebra and Graphic Calculus software. Participants are 35 pre-service mathematics teachers. To analyse formative questioning, two types of questions are investigated: mathematical questions and technical questions. Data were collected through lesson plans, teaching notes, interviews and observations. Descriptive statistics of the number of questions in the lesson plans before and after the workshops are presented. Examples of two types of questions are discussed using the theoretical framework. One pre-service teacher was selected and a deeper analysis of the way he used questioning during his three lessons was also investigated. The findings indicated an improvement in using technical questions for formative purposes and that the course provided a guideline in planning and using mathematical and technical questions in CLEs.

After-Action Reports: Capturing Lessons Learned and Identifying Areas for Improvement. Lessons Learned from School Crises and Emergencies. Volume 2, Issue 1, 2007

ERIC Educational Resources Information Center

US Department of Education, 2007

2007-01-01

"Lessons Learned" is a series of publications that are a brief recounting of actual school emergencies and crises. This issue of "Lessons Learned" addresses after-action reports, which are an integral part of the emergency preparedness planning continuum and support effective crisis response. After-action reports have a threefold purpose. They…

Battery packaging - Technology review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Maiser, Eric

2014-06-16

This paper gives a brief overview of battery packaging concepts, their specific advantages and drawbacks, as well as the importance of packaging for performance and cost. Production processes, scaling and automation are discussed in detail to reveal opportunities for cost reduction. Module standardization as an additional path to drive down cost is introduced. A comparison to electronics and photovoltaics production shows 'lessons learned' in those related industries and how they can accelerate learning curves in battery production.

Management Challenges in an Information Communication Technology (ICT) Network in Rural Schools

ERIC Educational Resources Information Center

Mihai, Maryke; Nieuwenhuis, Jan

2015-01-01

This study concerns the management of an interactive whiteboard (IWB) network started in April 2008 in Mpumalanga, with a leading school partnered with several disadvantaged schools, transmitting lessons in Mathematics and Science. Many educational institutions try to provide learners with better learning opportunities by equipping schools with…

Compressed Air System Redesign Results in Increased Production at a Fuel System Plant (Caterpillar Fuel Systems Pontiac Plant)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2001-06-01

This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the Caterpillar's Pontiac Plant project.

Beyond Technology Transfer: Quality of Life Impacts from R&D Outcomes

ERIC Educational Resources Information Center

Stone, Vathsala I.; Lockett, Michelle; Usiak, Douglas J.; Arthanat, Sajay

2010-01-01

This paper presents methodology and findings from three product efficacy studies that verify the quality of life benefits resulting from prior research, development, and transfer activities. The paper then discusses key lessons learned with implications for product evaluation practice. The studies assessed the quality of three assistive technology…

The Art of the Videoconference Lesson: Practical Application and Implications

ERIC Educational Resources Information Center

Barniskis, Becca; Thompson, Lisa Maren

2011-01-01

In their work with various educators, artists, and learners around the world, the authors have been exploring what it takes to collaborate successfully across multiple technological platforms and cultural borders. In this article, the authors describe three international collaborations in arts learning that they facilitated and participated in via…

A Dying Breed: The United States Cavalry in Today’s Army

DTIC Science & Technology

2013-05-31

must remain: When better roller skates are made, Cavalry horses will wear them.” ―Major General J. K. Herr, Chief of Cavalry Influenced by...boards to gather lessons learned . One of the topics of discussion was the future of the cavalry. Though technology and the operating

Constructing Arguments with 3-D Printed Models

ERIC Educational Resources Information Center

McConnell, William; Dickerson, Daniel

2017-01-01

In this article, the authors describe a fourth-grade lesson where 3-D printing technologies were not only a stimulus for engagement but also served as a modeling tool providing meaningful learning opportunities. Specifically, fourth-grade students construct an argument that animals' external structures function to support survival in a particular…

Lessons Learned from the Implementation of Electronic Portfolios at Three Universities

ERIC Educational Resources Information Center

Wilhelm, Lance; Puckett, Kathleen; Beisser, Sally; Wishart, William; Merideth, Eunice; Sivakumaran, Thilla

2006-01-01

Portfolios are used in teacher education programs to provide evidence of pre-service teachers' professional growth and development. As programs are better able to integrate technology into the teacher preparation curriculum, many educational institutions are implementing electronic versions of portfolios (e-portfolios) on a widespread basis. Uses…

DG's New Year's presentation

ScienceCinema

Heuer, R.-D.

2018-05-22

CERN general staff meeting. Looking back at key messages: Highest priority: LHC physics in 2009; Increase diversity of the scientific program; Prepare for future projects; Establish open and direct communication; Prepare CERN towards a global laboratory; Increase consolidation efforts; Financial situation--tight; Knowledge and technology transfer--proactive; Contract policy and internal mobility--lessons learned.

Improving Project Management Using Formal Models and Architectures

NASA Technical Reports Server (NTRS)

Kahn, Theodore; Sturken, Ian

2011-01-01

This talk discusses the advantages formal modeling and architecture brings to project management. These emerging technologies have both great potential and challenges for improving information available for decision-making. The presentation covers standards, tools and cultural issues needing consideration, and includes lessons learned from projects the presenters have worked on.

Augmenting Classroom Practices with QR Codes

ERIC Educational Resources Information Center

Thorne, Tristan

2016-01-01

The use of mobile devices in the language classroom can help accomplish innumerable learning objectives, yet many teachers regard smartphones and tablets as obstacles to lesson goals. However, as portable technology continues to infiltrate classroom boundaries, it is becoming increasingly clear that educators should find ways to take advantage of…

Lessons Learned from a Collaborative Sensor Web Prototype

NASA Technical Reports Server (NTRS)

Ames, Troy; Case, Lynne; Krahe, Chris; Hess, Melissa; Hennessy, Joseph F. (Technical Monitor)

2002-01-01

This paper describes the Sensor Web Application Prototype (SWAP) system that was developed for the Earth Science Technology Office (ESTO). The SWAP is aimed at providing an initial engineering proof-of-concept prototype highlighting sensor collaboration, dynamic cause-effect relationship between sensors, dynamic reconfiguration, and remote monitoring of sensor webs.

78 FR 69742 - Agency Information Collection Activities: Request for Comments for a New Information Collection

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... the use of electronic technology, without reducing the quality of the collected information. All... roadside trees and utility poles and other fixed objects; and lessons learned. In addition to State... identify areas along interstate highways that would enhance forest health, improve and enhance aesthetics...

The Army Marches forward with CD-ROM.

ERIC Educational Resources Information Center

Pozo, Leo; O'Connor, Mary Ann

1992-01-01

Describes three applications of CD-ROM technology for publishing and distribution of U.S. Army forms and automation of the AD PAM 25-30, a microfiche index to the publications and forms. The production, field test, and evaluation phases of the project are discussed. Several lessons learned are summarized. (MES)

Lessons Learned on Management of CAS Development.

ERIC Educational Resources Information Center

Boyadjieff, Kiril

1995-01-01

Computer-assisted studies (CAS) attract foreign language professionals' attention due to the reliability of personal computers, the decreasing cost of available technology, and the new generation of students for whom electronic media are a familiar habitat. This article focuses on a project of the Defense Language Institute that produced over…

The Flip Side of Flipped Language Teaching

ERIC Educational Resources Information Center

Lyddon, Paul A.

2015-01-01

The past decade has seen a growing interest in "flipped teaching", an inversion of traditional teaching methods, whereby instruction formerly taking place in the classroom is made accessible online and lesson time is spent on interaction. Until very recently, flipped learning was largely limited to the Science, Technology, Engineering,…

Curriculum Model for Medical Technology: Lessons from International Benchmarking

ERIC Educational Resources Information Center

Pring-Valdez, Anacleta

2012-01-01

Curriculum is a crucial component of any educational process. Curriculum development and instructional management serve as effective tools for meeting the present and future needs of the local and national communities. In trying to strengthen the quality assurance system in Philippine higher education, institutions of higher learning were mandated…

Data in the Digital Age: Charting the Way for Multimedia Learning

ERIC Educational Resources Information Center

Maretich, Kaylene

2017-01-01

Information and communication technology (ICT) is an integral aspect of the current Australian Curriculum: Mathematics. The language, strategies and resources required in mathematics education today can be very different to the mathematics lessons experienced by current teachers when they themselves were at school (Sousa, 2015). Learning…

Computer Numerical Control: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Sinn, John W.

This instructional manual contains five learning activity packets for use in a workshop on computer numerical control for computer-aided manufacturing. The lessons cover the following topics: introduction to computer-aided manufacturing, understanding the lathe, using the computer, computer numerically controlled part programming, and executing a…

Safety and Security: Lessons Learned from 9/11.

ERIC Educational Resources Information Center

Schmitz, William J.

2002-01-01

Discusses issues faced by the Borough of Manhattan Community College following the September 11th terrorist attacks: the expense of recovery and budgeting for it, developing an emergency preparedness plan, the characteristics of emergency management and disaster recovery plans, technology and its role in emergency management, being prepared for…

A Short History of Performance Assessment: Lessons Learned.

ERIC Educational Resources Information Center

Madaus, George F.; O'Dwyer, Laura M.

1999-01-01

Places performance assessment in the context of high-stakes uses, describes underlying technologies, and outlines the history of performance testing from 210 B.C.E. to the present. Historical issues of fairness, efficiency, cost, and infrastructure influence contemporary efforts to use performance assessments in large-scale, high-stakes testing…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Exercise environment for Introduction to Cyber Technologies class. This software is essentially a collection of short scripts, configuration files, and small executables that form the exercise component of the Sandia Cyber Technologies Academy's Introduction to Cyber Technologies class. It builds upon other open-source technologies, such as Debian Linux and minimega, to provide comprehensive Linux and networking exercises that make learning these topics exciting and fun. Sample exercises: a pre-built set of home directories the student must navigate through to learn about privilege escalation, the creation of a virtual network playground designed to teach the student about the resiliency of themore » Internet, and a two-hour Capture the Flag challenge for the final lesson. There are approximately thirty (30) exercises included for the students to complete as part of the course.« less

Distributed Energy Planning for Climate Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stout, Sherry R; Hotchkiss, Elizabeth L; Day, Megan H

At various levels of government across the United States and globally climate resilient solutions are being adopted and implemented. Solutions vary based on predicted hazards, community context, priorities, complexity, and available resources. Lessons are being learned through the implementation process, which can be replicated regardless of level or type of government entity carrying out the resiliency planning. Through a number of analyses and technical support across the world, NREL has learned key lessons related to resilience planning associated with power generation and water distribution. Distributed energy generation is a large factor in building resilience with clean energy technologies and solutions.more » The technical and policy solutions associated with distributed energy implementation for resilience fall into a few major categories, including spatial diversification, microgrids, water-energy nexus, policy, and redundancy.« less

Integrating Ubunifu, informal science, and community innovations in science classrooms in East Africa

NASA Astrophysics Data System (ADS)

Semali, Ladislaus M.; Hristova, Adelina; Owiny, Sylvia A.

2015-12-01

This study examines the relationship between informal science and indigenous innovations in local communities in which students matured. The discussion considers methods for bridging the gap that exists between parents' understanding of informal science ( Ubunifu) and what students learn in secondary schools in Kenya, Tanzania, and Uganda. In an effort to reconcile the difference between students' lived experiences and Science, Technology, Engineering, and Mathematics (STEM) taught in classrooms, this study presents an experiential iSPACES instructional model as an example of curriculum integration in science classrooms. The culmination is presentation of lessons learned from history, including Africa's unique contributions to science, theory, and indigenous innovations, in the hope that these lessons can spur the development of new instructional practices, standards, curriculum materials, professional and community development, and dialogue among nations.

Poisonous gas and the american expeditionary forces in World War I: Is it still 1918. Monograph

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey, D.W.

1992-12-06

This monograph investigates the uses and effects of chemical weapons used on units. The doctrine and technology available today are compared to those available and used by the American Expeditionary Forces (AEF) during World War One. The monograph first discusses the development and use of gas during WWI. Specifically, five case studies are presented representing the offensive and defensive use of gas as seen by AEF units. Each case is then analyzed using the battlefield operating systems (BOS). Lessons learned are then extracted from the case studies. Today's doctrine is then analyzed using these lessons learned to determine if themore » US is any better prepared to fight in a chemical environment today than it was at the end of WWI.« less

Lessons from 30 Years of Flight Software

NASA Technical Reports Server (NTRS)

McComas, David C.

2015-01-01

This presentation takes a brief historical look at flight software over the past 30 years, extracts lessons learned and shows how many of the lessons learned are embodied in the Flight Software product line called the core Flight System (cFS). It also captures the lessons learned from developing and applying the cFS.

Map, Excite, Jump, and Measure: An Outreach Activity That Utilizes Seismology to Engage Students in Technology, Science, Engineering, and Mathematics

NASA Astrophysics Data System (ADS)

van der Lee, S.; Tekverk, K.; Rooney, K.; Boxerman, J.

2013-12-01

We designed and will present a lesson plan to teach students STEM concepts through seismology. The plan addresses new generation science standards in the Framework for K-12 Science Education as well AAAS Benchmarks for Science Literacy. The plan can be executed at a facility with a seismometer in a research facility or university, on a field trip, but it can also be used in a school setting with a school seismometer. Within the lesson plan, the students first use technology to obtain earthquake location data and map them. Next, the students learn about the science of earthquakes, which is followed by an engineering activity in which the students design a hypothetical seismometer and interact with the actual seismometer and live data display. Lastly the students use mathematics to locate an earthquake through trilateration. The lesson plan has been fine-tuned through implementation with over 150 students from grades 3-12 from the Chicago area.

Communication and Collaboration During Natural Disasters: The Lessons Learned From Past Experience. Lessons Learned From School Crises and Emergencies, Volume 3, Issue 2, 2008

ERIC Educational Resources Information Center

US Department of Education, 2008

2008-01-01

"Lessons Learned" is a series of publications that are a brief recounting of actual school emergencies and crises. This "Lessons Learned" issue focuses on the response and recovery efforts to wildfires by the San Diego County Office of Education (SDCOE) and its school and community partners. Natural disasters such as floods,…

China Naval Modernization: Implications for U.S. Navy Capabilities - Background and Issues for Congress

DTIC Science & Technology

2013-07-05

learn how to effectively operate aircraft carriers than it took the U.S., the commander of the U.S. Navy’s Atlantic air arm, Rear Adm. Ted Branch said...Wednesday. “They will learn faster than we did and they will leverage our lessons,” Branch said during a panel at the at the EAST: Joint...advantage of starting with more modern technology but it’s still a tough nut to crack to learn how to do this business,” Branch said. “They still have

Surveying the technology landscape: Teachers' use of technology in secondary mathematics classrooms

NASA Astrophysics Data System (ADS)

Goos, Merrilyn; Bennison, Anne

2008-12-01

For many years, education researchers excited by the potential for digital technologies to transform mathematics teaching and learning have predicted that these technologies would become rapidly integrated into every level of education. However, recent international research shows that technology still plays a marginal role in mathematics classrooms. These trends deserve investigation in the Australian context, where over the past 10 years secondary school mathematics curricula have been revised to allow or require use of digital technologies in learning and assessment tasks. This paper reports on a survey of mathematics teachers' use of computers, graphics calculators, and the Internet in Queensland secondary schools, and examines relationships between use and teachers' pedagogical knowledge and beliefs, access to technology, and professional development opportunities. Although access to all forms of technology was a significant factor related to use, teacher beliefs and participation in professional development were also influential. Teachers wanted professional development that modelled planning and pedagogy so they could meaningfully integrate technology into their lessons in ways that help students learn mathematical concepts. The findings have implications not only for resourcing of schools, but also for designing professional development that engages teachers with technology in their local professional contexts.

Using information and communication technology (ICT) to the maximum: learning and teaching biology with limited digital technologies

NASA Astrophysics Data System (ADS)

Van Rooy, Wilhelmina S.

2012-04-01

Background: The ubiquity, availability and exponential growth of digital information and communication technology (ICT) creates unique opportunities for learning and teaching in the senior secondary school biology curriculum. Digital technologies make it possible for emerging disciplinary knowledge and understanding of biological processes previously too small, large, slow or fast to be taught. Indeed, much of bioscience can now be effectively taught via digital technology, since its representational and symbolic forms are in digital formats. Purpose: This paper is part of a larger Australian study dealing with the technologies and modalities of learning biology in secondary schools. Sample: The classroom practices of three experienced biology teachers, working in a range of NSW secondary schools, are compared and contrasted to illustrate how the challenges of limited technologies are confronted to seamlessly integrate what is available into a number of molecular genetics lessons to enhance student learning. Design and method: The data are qualitative and the analysis is based on video classroom observations and semi-structured teacher interviews. Results: Findings indicate that if professional development opportunities are provided where the pedagogy of learning and teaching of both the relevant biology and its digital representations are available, then teachers see the immediate pedagogic benefit to student learning. In particular, teachers use ICT for challenging genetic concepts despite limited computer hardware and software availability. Conclusion: Experienced teachers incorporate ICT, however limited, in order to improve the quality of student learning.

Earth Observation Training and Education with ESA LearnEO!

NASA Astrophysics Data System (ADS)

Byfield, Valborg; Mathieu, Pierre-Philippe; Dobson, Malcolm; Rosmorduc, Vinca; Del Frate, Fabio; Banks, Chris; Picchiani, Matteo

2013-04-01

For society to benefit fully from its investment in Earth observation, EO data must be accessible and familiar to a global community of users who have the skills, knowledge and understanding to use the observations appropriately in their work. Achieving this requires considerable education effort. LearnEO! (www.learn-eo.org) is a new ESA education project that contributes towards making this a reality. LearnEO! has two main aims: to develop new training resources that use data from sensors on ESA satellites to explore a variety of environmental topics, and to stimulate and support members of the EO and education communities who may be willing to develop and share new education resources in the future. The project builds on the UNESCO Bilko project, which currently supplies free software, tutorials, and example data to users in 175 countries. Most of these users are in academic education or research, but the training resources are also of interest to a growing number of professionals in government, NGOs and private enterprise. Typical users are not remote sensing experts, but see satellite data as one of many observational tools. They want an easy, low-cost means to process, display and analyse data from different satellite sensors as part of their work in environmental research, monitoring and policy development. Many of the software improvements and training materials developed in LearnEO! are in response to requests from this user community. The LearnEO! tutorial and peer-reviewed lessons are designed to teach satellite data processing and analysis skills at different levels, from beginner to advanced - where advanced lessons requires some previous experience with Earth observation techniques. The materials are aimed at students and professionals in various branches of Earth sciences who have not yet specialised in specific EO technologies. The lessons are suitable for self-study, university courses at undergraduate to MSc level, or for continued professional development training. Each lesson comes complete with data, analysis tools and background information required to complete the suggested activities and answer the study questions. Model answers are supplied for users working on their own or with limited specialist support. The web site also provides access to annotated data sets and a lesson developers resource library, both designed to support users who wish to develop their own lessons and tutorials and share these with others. Registered users are encouraged to become involved with the project by providing support for future software and lesson development, testing, and peer review.

HASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 62. The Influence of Knowledge Diffusion on Aeronautics Innovation: The Research, Development, and Production of Large Commercial Aircraft in France, Germany, and the United Kingdom,

DTIC Science & Technology

1997-04-01

This paper focuses on how European public policies-individually and collectively-influence the diffusion of knowledge and technology. It begins with...some tentative lessons learned, and a discussion of the consequences of national strategies and policies for the diffusion of knowledge and technology in an era of globalization.

Lessons learned in control center technologies and non-technologies

NASA Technical Reports Server (NTRS)

Hansen, Elaine R.

1991-01-01

Information is given in viewgraph form on the Solar Mesosphere Explorer (SME) Control Center and the Oculometer and Automated Space Interface System (OASIS). Topics covered include SME mission operations functions; technical and non-technical features of the SME control center; general tasks and objects within the Space Station Freedom (SSF) ground system nodes; OASIS-Real Time for the control and monitoring of of space systems and subsystems; and OASIS planning, scheduling, and PC architecture.

Unintended knowledge learnt in primary science practical lessons

NASA Astrophysics Data System (ADS)

Park, Jisun; Abrahams, Ian; Song, Jinwoong

2016-11-01

This study explored the different kinds of unintended learning in primary school practical science lessons. In this study, unintended learning has been defined as student learning that was found to occur that was not included in the teachers learning objectives for that specific lesson. A total of 22 lessons, taught by five teachers in Korean primary schools with 10- to 12-year-old students, were audio-and video recorded. Pre-lesson interviews with the teachers were conducted to ascertain their intended learning objectives. Students were asked to write short memos after the lesson about what they learnt. Post-lesson interviews with students and teachers were undertaken. What emerged was that there were three types of knowledge that students learnt unintentionally: factual knowledge gained by phenomenon-based reasoning, conceptual knowledge gained by relation- or model-based reasoning, and procedural knowledge acquired by practice. Most unintended learning found in this study fell into the factual knowledge and only a few cases of conceptual knowledge were found. Cases of both explicit procedural knowledge and implicit procedural knowledge were found. This study is significant in that it suggests how unintended learning in practical work can be facilitated as an educative opportunity for meaningful learning by exploring what and how students learnt.

Lessons learned from first year cistern monitoring in Camden ...

EPA Pesticide Factsheets

Invited panelist for Webinar 08/16/2016 by Office of Water : Lessons Learned from Past Green Infrastructure Projects Invited panelist for Webinar 08/16/2016 by Office of Water : Lessons Learned from Past Green Infrastructure Projects

Launch Vehicle Propulsion Life Cycle Cost Lessons Learned

NASA Technical Reports Server (NTRS)

Zapata, Edgar; Rhodes, Russell E.; Robinson, John W.

2010-01-01

This paper will review lessons learned for space transportation systems from the viewpoint of the NASA, Industry and academia Space Propulsion Synergy Team (SPST). The paper provides the basic idea and history of "lessons learned". Recommendations that are extremely relevant to NASA's future investments in research, program development and operations are"'provided. Lastly, a novel and useful approach to documenting lessons learned is recommended, so as to most effectively guide future NASA investments. Applying lessons learned can significantly improve access to space for cargo or people by focusing limited funds on the right areas and needs for improvement. Many NASA human space flight initiatives have faltered, been re-directed or been outright canceled since the birth of the Space Shuttle program. The reasons given at the time have been seemingly unique. It will be shown that there are common threads as lessons learned in many a past initiative.

77 FR 55230 - Japan Lessons-Learned Project Directorate Interim Staff Guidance JLD-ISG-2012-01; Compliance With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0068] Japan Lessons-Learned Project Directorate Interim... Commission (NRC). ACTION: Japan Lessons-Learned Project Directorate interim staff guidance; issuance. SUMMARY...-Learned Project Directorate Interim Staff Guidance (JLD-ISG), JLD-ISG-2012-01, ``Compliance with Order EA...

77 FR 55232 - Japan Lessons-Learned Project Directorate Interim Staff Guidance JLD-ISG-2012-03; Compliance With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0067] Japan Lessons-Learned Project Directorate Interim...-Learned Project Directorate Interim Staff Guidance; issuance. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC or the Commission) is issuing the Final Japan Lessons-Learned Project Directorate (JLD...

77 FR 55231 - Japan Lessons-Learned Project Directorate Interim Staff Guidance JLD-ISG-2012-02; Compliance With...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-07

... NUCLEAR REGULATORY COMMISSION [NRC-2012-0069] Japan Lessons-Learned Project Directorate Interim...-Learned Project Directorate interim staff guidance; issuance. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC or the Commission) is issuing the Final Japan Lessons-Learned Project Directorate Interim...

Army Communicator. Volume 29, Number 3, Fall 2004

DTIC Science & Technology

2004-01-01

brigades from the Active Component, Army Reserves and National Guard. Conversely, it’s a learning experience for the units involved with us — working with...computers and 250 video teleconfer- encing capabilities. The first of these units will be activated under the 311th TSC in 2005. “The technology has...lessons learned from OEF and OIF and using these to better prepare our Soldiers and leaders. Our NCO Acad- emy, Captains Career and Warrant Ad- vanced

Lessons Learned from Applying Design Thinking in a NASA Rapid Design Study in Aeronautics

NASA Technical Reports Server (NTRS)

McGowan, Anna-Maria; Bakula, Casey; Castner, Raymond

2017-01-01

In late 2015, NASA's Aeronautics Research Mission Directorate (ARMD) funded an experiment in rapid design and rapid teaming to explore new approaches to solving challenging design problems in aeronautics in an effort to cultivate and foster innovation. This report summarizes several lessons learned from the rapid design portion of the study. This effort entailed learning and applying design thinking, a human-centered design approach, to complete the conceptual design for an open-ended design challenge within six months. The design challenge focused on creating a capability to advance experimental testing of autonomous aeronautics systems, an area of great interest to NASA, the US government as a whole, and an entire ecosystem of users and developers around the globe. A team of nine civil servant researchers from three of NASA's aeronautics field centers with backgrounds in several disciplines was assembled and rapidly trained in design thinking under the guidance of the innovation and design firm IDEO. The design thinking process, while used extensively outside the aerospace industry, is less common and even counter to many practices within the aerospace industry. In this report, several contrasts between common aerospace research and development practices and design thinking are discussed, drawing upon the lessons learned from the NASA rapid design study. The lessons discussed included working towards a design solution without a set of detailed design requirements, which may not be practical or even feasible for management to ascertain for complex, challenging problems. This approach allowed for the possibility of redesigning the original problem statement to better meet the needs of the users. Another lesson learned was to approach problems holistically from the perspective of the needs of individuals that may be affected by advances in topic area instead of purely from a technological feasibility viewpoint. The interdisciplinary nature of the design team also provided valuable experience by allowing team members from different technological backgrounds to work side-by-side instead of dividing into smaller teams, as is frequently done in traditional multidisciplinary design. The team also learned how to work with qualitative data obtained primarily through the 70-plus interviews that were conducted over the course of this project, which was a sharp contrast to using quantitative data with regards to identifying, capturing, analyzing, storing, and recalling the data. When identifying potential interviewees who may have useful contributions to the design subject area, the team found great value in talking to non-traditional users and potential beneficiaries of autonomous aeronautics systems whose impact on the aeronautics autonomy ecosystem is growing swiftly. Finally, the team benefitted from using "sacrificial prototyping," which is a method of rapidly prototyping draft concepts and ideas with the intent of enabling potential users to provide significant feedback early in the design process. This contrasts the more common approach of using expensive prototypes that focus on demonstrating technical feasibility. The unique design approach and lessons learned by the team throughout this process culminated in a final design concept that was quite different than what the team originally assumed would be the design concept initially. A summary of the more usercentered final design concept is also provided.

Teaching with iPads

NASA Astrophysics Data System (ADS)

Maj, Hubert

2015-04-01

Bilingual students in high school with bilingual units in Boguchwała have received iPads for learning English and a few subjects using CLIL (biology, basics of entrepreneurship, geography, IT and mathematics). Lessons with iPads are interesting for students for several reasons. First of all, teenagers like new technologies and using iPads for teaching helps students to learn by fun. Secondly, iPads give new possibilities of looking for knowledge about each theme. Moreover, teaching with iPads develops students' engagement. They have a chance to choose a few among over 65 000 applications for gathering and then presenting information about the lesson topic. They can easily prepare presentations, movies, cartoons, mind maps or whatever they like. Teaching students, thanks to the iPads, makes it their initiative, and the teacher can inspire them to look for the knowledge rather than disciplining pupils. But teaching with iPads is connected with many problems. For instance, there are not any examples on how to teach using these tools. It is very up-to-date technology and teachers firstly must learn the possibilities of iPads and look for new applications. It takes much time, especially at the beginning, and is difficult especially for inexperienced teachers. In addition, it is almost impossible to maintain control of the iPads for all of the students during the lesson. They can use their iPads for something unconnected with the topic of the lesson. Thirdly is lack of time - active methods (with iPads as well) are more time-consuming and it could be that they do not finish the whole program. And of course the last, but not at least, is the problem of money. Some of the applications must be paid for, and it is usually obligatory to possess a credit card. Fortunately, it is not expensive - applications usually cost a few euros and many of them are free and really good.

Bridging Learning Communities Through Experiential Learning with GIST: 2Y College Experience

NASA Astrophysics Data System (ADS)

Sorey, N.; Phillips, C. D.

2017-12-01

This study reviews successes of community engagement through experiential learning with GIST across academic disciplines that leverage topics with technology and community relationships throughout a two-year campus and the community at large. This approach allowed for a diversification of populations reached through college student engagement and community outreach efforts. Technological frameworks and development of best practice resources to support students and faculty were shown to increase the capacity for undergraduate research experiences, K12 short course offerings during the summer, and the formation of a STEM-focused student organization. The RSO has participated in activities that include educational technology development, participating in the growth and development of the area's maker movement community, and geoscience outreach and education. Development of the program thus far and lessons learned have resulted in a proposal for an areal-based informal pathway linking the K12 community to area colleges by integrating geoscience outreach with GIST through the maker movement.

DT&E Forum for Best Practices and Lessons Learned

DTIC Science & Technology

2013-05-01

E A N A L Y S E S IDA Paper P-4975 DT&E Forum for Best Practices and Lessons Learned L. B. Scheiber, Project Leader...and accessing from the DT&E Forum website. A. Collection of Lessons Learned and Best Practices We began the effort by reviewing approximately 30...Forum’s Home Page 1. Searching for BPLL Documents The DT&E Forum website contains DT&E Best Practice and Lessons Learned (BPLL) documents along with the

Papermaking and Poetry. ArtsEdge Curricula, Lessons and Activities.

ERIC Educational Resources Information Center

Withroe, J.

In this lesson, designed to be taught within a unit on China, primary-grade students will learn about the history of papermaking and its origins in China and even learn how to make their own paper. After learning about Chinese art and culture in the lesson, students will write their own "cinquain" poem about China. The lesson presents an…

Planning to Serve: Using Backwards Planning to Design Service-Learning Lesson Plans in the Preservice Curriculum

ERIC Educational Resources Information Center

Stiler, Gary

2009-01-01

The author describes how the Understanding by Design (backwards planning) lesson plan format was used by his preservice K-12 students to develop service-learning lesson plans. Preservice teachers in a multicultural education course were given an assignment to develop service-learning lesson plans using the Understanding by Design planning process.…

Applications of simulation technology in psychiatric mental health nursing education.

PubMed

Brown, J F

2008-10-01

The purpose of this paper is to review the use of simulation in education across the health professionals, to describe the development and implementation of innovative simulation techniques for an undergraduate psychiatric mental-health nursing course, and to identify lessons learned and future directions for successful simulation experiences in psychiatric nursing.

Incorporating Concept Mapping in Project-Based Learning: Lessons from Watershed Investigations

ERIC Educational Resources Information Center

Rye, James; Landenberger, Rick; Warner, Timothy A.

2013-01-01

The concept map tool set forth by Novak and colleagues is underutilized in education. A meta-analysis has encouraged teachers to make extensive use of concept mapping, and researchers have advocated computer-based concept mapping applications that exploit hyperlink technology. Through an NSF sponsored geosciences education grant, middle and…

How Community Colleges Are Closing the Skills Gap through CTE and STEM Funding Innovations

ERIC Educational Resources Information Center

Lowry, Kimberly; Thomas-Anderson, Tricia

2017-01-01

This chapter summarizes funding trends to support career and technical education (CTE) and science, technology, engineering, and math (STEM) programs at community colleges compared to funding for similar programs at 4-year colleges and universities. Examples of intramural and extramural funding strategies as well as lessons learned and…

Laminar-flow flight experiments

NASA Technical Reports Server (NTRS)

Wagner, Richard D.; Maddalon, Dal V.; Bartlett, D. W.; Collier, F. S., Jr.; Braslow, A. L.

1989-01-01

The flight testing conducted over the past 10 years in the NASA laminar-flow control (LFC) will be reviewed. The LFC program was directed towards the most challenging technology application, the high supersonic speed transport. To place these recent experiences in perspective, earlier important flight tests will first be reviewed to recall the lessons learned at that time.

ASSESSING UST CORRECTIVE ACTION TECHNOLOGIES: LESSONS LEARNED ABOUT IN SITU AIR SPARGING AT THE DENISON AVENUE SITE - CLEVELAND, OH

EPA Science Inventory

In situ air sparging (IAS) has been proposed and installed at an increasing number of sites to address contamination in both the saturated and unsaturated zones. Because of the lack of experimental and substantive performance data, however, the actual performance and effectivene...

Cost-Cutting in Higher Education: Lessons Learned from Collaboration, Technology, and Outsourcing Initiatives. Draft.

ERIC Educational Resources Information Center

Kaganoff, Tessa

This document presents a review of cost-containment initiatives relevant to higher education institutions. Originally commissioned to examine cost containment initiatives carried out by institutions affiliated with the Foundation for Independent Higher Education (FIHE), the paper was expanded to include a sector-wide review of three types of…

A Path Analysis of Educator Perceptions of Open Educational Resources Using the Technology Acceptance Model

ERIC Educational Resources Information Center

Kelly, Hope

2014-01-01

Open educational resources (OER) are making their way into a variety of educational contexts from formal lesson planning to just in time learning. Educators and training professionals have been recognized as an important audience for these materials. The concepts of "self-efficacy" and "outcome judgment" from social cognitive…

Working with Pedagogical Agents: Understanding the "Back End" of an Intelligent Tutoring System

ERIC Educational Resources Information Center

Wolfe, Christopher; Widmer, Colin L.; Weil, Audrey M.; Cedillos-Whynott, Elizabeth M.

2015-01-01

Students in an undergraduate psychology course on Learning and Cognition used SKO (formerly AutoTutor Lite), an Intelligent Tutoring System, to create interactive lessons in which a pedagogic agent (animated avatar) engages users in a tutorial dialogue. After briefly describing the technology and underlying psychological theory, data from an…

CASE STUDY: IN-SITU SOLIDIFICATION/STABILIZATION OF HAZARDOUS ACID WASTE OIL SLUDGE AND LESSONS LEARNED

EPA Science Inventory

The South 8th Street site contained a 2.5 acre oily sludge pit with very low pH waste produced by oil recycling activities. This sludge was treated using in-situ solidification/stabilization technology applied by deep soil mixing augers. The problems encountered, solutions develo...

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

Strategies that Strengthen: Lessons from Colleges that Have Struggled

ERIC Educational Resources Information Center

Brown, Alice W.

2012-01-01

Many small colleges are struggling and should remember that denial is not prevention. Technology is providing new ways for students to get degrees without being a resident on a campus, accrediting agencies are increasing their demands for evidence that students are learning, and the costs for operating an institution (such as utilities and…

LMS Lessons

ERIC Educational Resources Information Center

Freifeld, Lorri

2010-01-01

With technology changing every second of every day, it is no surprise a learning management system (LMS) quickly can become outdated. But it is no easy task to re-engineer a current LMS or find exactly the right new one to purchase. In this article, three 2010 Top Young Trainers share their experiences with implementing or re-engineering an…

ACTEX flight experiment: development issues and lessons learned

NASA Astrophysics Data System (ADS)

Schubert, S. R.

1993-09-01

The ACTEX flight experiment is scheduled for launch and to begin its on orbit operations in early 1994. The objective of the ACTEX experiment is to demonstrate active vibration control in space, using the smart structure technology. This paper discusses primarily the hardware development and program management issues associated with delivering low cost flight experiments.

GATEWAY Report Brief: SSL Evaluation: Philadelphia International Airport Apron Lighting

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

Summary of report that documents a trial installation of LED apron lighting that replaced the existing high-pressure sodium luminaires at Philadelphia International Airport. Such high-mast applications remain challenging for LED technology, and the lessons learned from this project may help facility managers and LED product manufacturers better meet those challenges.

The Sustainability Challenge: Taking EdTech to the Next Level.

ERIC Educational Resources Information Center

Dickard, Norris, Ed.

This publication summarizes the lessons learned during 2002 in a collaborative project that had two central goals: (1) to assess the current thinking on sustainability and outlays for educational technology (edtech) investments by using as national case studies the cities of Chicago, Cleveland and Milwaukee; and (2) to highlight critical issues…

Developing global health technology standards: what can other industries teach us?

PubMed Central

2013-01-01

Background There is a lack of effective and affordable technologies to address health needs in the developing world. One way to address problems of innovation and affordability is to design global health technologies to follow agreed-upon standards. This Debate article argues that we can better develop standards for global health technologies if we learn lessons from other industries. Discussion The article’s Background section begins by explaining why standards are needed in global health. For example, if global health technologies can be modularized into independent interfacing parts, these parts can then interact via well-defined standards in a “plug and play” fashion. This can avoid development of mutually incompatible solutions by different organizations, speed the pace of innovation, unlock health systems from single providers and approaches, and lower barriers to entry. The Background then gives a brief primer on standards and discusses incentives for health standards. The article’s Discussion section begins with brief relevant cases of standards development from other industries, including electricity, container shipping, CD standards, Universal Serial Bus (USB), and the Internet. It then explores lessons from these and other industries that suggest how to develop standards for global health technologies. The remainder of the Discussion considers intellectual property and regulatory issues and standards-based global health business models, and ends with a checklist of considerations for health standards development leaders. (The associated Additional file discusses observations from standards development for cell phones and semiconductors, as well as challenges in the standards development process itself.) Throughout the article, point-of-care diagnostics are used as an illustrative example. An initiative is already underway to explore standardized diagnostics platforms. Summary This Debate article aims to convince the reader that standards can benefit global health technologies if we learn lessons from other industries. The article draws from historical examples and the authors’ experiences to suggest principles, challenges, and opportunities in developing these standards. If implemented well, standardized platforms can lower barriers to entry, improve affordability, and create a vibrant ecosystem of innovative new global health technologies. PMID:24134866

In-orbit results of Delfi-n3Xt: Lessons learned and move forward

NASA Astrophysics Data System (ADS)

Guo, Jian; Bouwmeester, Jasper; Gill, Eberhard

2016-04-01

This paper provides an update of the Delfi nanosatellite programme of the Delft University of Technology (TU Delft), with a focus on the recent in-orbit results of the second TU Delft satellite Delfi-n3Xt. In addition to the educational objective that has been reached with more than 80 students involved in the project, most of the technological objectives of Delfi-n3Xt have also been fulfilled with successful in-orbit demonstrations of payloads and platform. Among these demonstrations, four are highlighted in this paper, including a solid cool gas micropropulsion system, a new type of solar cell, a more robust Command and Data Handling Subsystem (CDHS), and a highly integrated Attitude Determination and Control Subsystem (ADCS) that performs three-axis active control using reaction wheels. Through the development of Delfi-n3Xt, significant experiences and lessons have been learned, which motivated a further step towards DelFFi, the third Delfi CubeSat mission, to demonstrate autonomous formation flying using two CubeSats named Delta and Phi. A brief update of the DelFFi mission is also provided.

Standards Advisor-Advanced Information Technology for Advanced Information Delivery

NASA Technical Reports Server (NTRS)

Hawker, J. Scott

2003-01-01

Developers of space systems must deal with an increasing amount of information in responding to extensive requirements and standards from numerous sources. Accessing these requirements and standards, understanding them, comparing them, negotiating them and responding to them is often an overwhelming task. There are resources to aid the space systems developer, such as lessons learned and best practices. Again, though, accessing, understanding, and using this information is often more difficult than helpful. This results in space systems that: 1. Do not meet all their requirements. 2. Do not incorporate prior engineering experience. 3. Cost more to develop. 4. Take longer to develop. The NASA Technical Standards Program (NTSP) web site at http://standards.nasa.gov has made significant improvements in making standards, lessons learned, and related material available to space systems developers agency-wide. The Standards Advisor was conceived to take the next steps beyond the current product, continuing to apply evolving information technology that continues to improve information delivery to space systems developers. This report describes the features of the Standards Advisor and suggests a technical approach to its development.

Learning from Lessons: studying the structure and construction of mathematics teacher knowledge in Australia, China and Germany

NASA Astrophysics Data System (ADS)

Chan, Man Ching Esther; Clarke, David J.; Clarke, Doug M.; Roche, Anne; Cao, Yiming; Peter-Koop, Andrea

2018-03-01

The major premise of this project is that teachers learn from the act of teaching a lesson. Rather than asking "What must a teacher already know in order to practice effectively?", this project asks "What might a teacher learn through their activities in the classroom and how might this learning be optimised?" In this project, controlled conditions are created utilising purposefully designed and trialled lesson plans to investigate the process of teacher knowledge construction, with teacher selective attention proposed as a key mediating variable. In order to investigate teacher learning through classroom practice, the project addresses the following questions: To what classroom objects, actions and events do teachers attend and with what consequence for their learning? Do teachers in different countries attend to different classroom events and consequently derive different learning benefits from teaching a lesson? This international project combines focused case studies with an online survey of mathematics teachers' selective attention and consequent learning in Australia, China and Germany. Data include the teacher's adaptation of a pre-designed lesson, the teacher's actions during the lesson, the teacher's reflective thoughts about the lesson and, most importantly, the consequences for the planning and delivery of a second lesson. The combination of fine-grained, culturally situated case studies and large-scale online survey provides mutually informing benefits from each research approach. The research design, so constituted, offers the means to a new and scalable vision of teacher learning and its promotion.

Considerations for implementing an organizational lessons learned process.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fosshage, Erik D

2013-05-01

This report examines the lessons learned process by a review of the literature in a variety of disciplines, and is intended as a guidepost for organizations that are considering the implementation of their own closed-loop learning process. Lessons learned definitions are provided within the broader context of knowledge management and the framework of a learning organization. Shortcomings of existing practices are summarized in an attempt to identify common pitfalls that can be avoided by organizations with fledgling experiences of their own. Lessons learned are then examined through a dual construct of both process and mechanism, with emphasis on integrating intomore » organizational processes and promoting lesson reuse through data attributes that contribute toward changed behaviors. The report concludes with recommended steps for follow-on efforts.« less

Technology transfer in the NASA Ames Advanced Life Support Division

NASA Technical Reports Server (NTRS)

Connell, Kathleen; Schlater, Nelson; Bilardo, Vincent; Masson, Paul

1992-01-01

This paper summarizes a representative set of technology transfer activities which are currently underway in the Advanced Life Support Division of the Ames Research Center. Five specific NASA-funded research or technology development projects are synopsized that are resulting in transfer of technology in one or more of four main 'arenas:' (1) intra-NASA, (2) intra-Federal, (3) NASA - aerospace industry, and (4) aerospace industry - broader economy. Each project is summarized as a case history, specific issues are identified, and recommendations are formulated based on the lessons learned as a result of each project.

Lesson Study and Teachers Knowledge Development: Collaborative Critique of a Research Model and Methods.

ERIC Educational Resources Information Center

Lewis, Catherine; Perry, Rebecca; Murata, Aki

During "lesson study" teachers formulate long-term goals for student learning and development, collaboratively work on "research lessons" to bring these goals to life, document and discuss student responses to these lessons, and revise the lessons in response to student learning. This document summarizes the content of a…

A Checklist of Artillery Organizational Histories; A Compilation.

DTIC Science & Technology

1982-03-08

Artillery. 3d Battalion. Ab Operational reports - Lessons learned. ( 3d ) 1966- . (Vietnam n.p.) APO 96318. 1. Vietnamese Conflict, 1961- I. Title. 11...1973. A631 U.S. Army. 18th Artillery. 3d Bn. A18 Operational report(s) - Lessons learned. ( 3d ) (Vietnam, n.p.) 1966- nos. 1. Vietnamese Conflict, 1961...1973. I. Title. II. T: Lessons learned. *DS557 Vietnamese Conflict, 1961-1973 A63A]8 ’U.S. Army. 18th Artillery. 3d Bn. Lessons learned. (Vietnam, n.p

Learning to teach mathematics with technology: A survey of professional development needs, experiences and impacts

NASA Astrophysics Data System (ADS)

Bennison, Anne; Goos, Merrilyn

2010-04-01

The potential for digital technologies to enhance students' mathematics learning is widely recognised, and use of computers and graphics calculators is now encouraged or required by secondary school mathematics curriculum documents throughout Australia. However, previous research indicates that effective integration of technology into classroom practice remains patchy, with factors such as teacher knowledge, confidence, experience and beliefs, access to resources, and participation in professional development influencing uptake and implementation. This paper reports on a large-scale survey of technology-related professional development experiences and needs of Queensland secondary mathematics teachers. Teachers who had participated in professional development were found to be more confident in using technology and more convinced of its benefits in supporting students' learning of mathematics. Experienced, specialist mathematics teachers in large metropolitan schools were more likely than others to have attended technology-related professional development, with lack of time and limited access to resources acting as hindrances to many. Teachers expressed a clear preference for professional development that helps them meaningfully integrate technology into lessons to improve student learning of specific mathematical topics. These findings have implications for the design and delivery of professional development that improves teachers' knowledge, understanding, and skills in a diverse range of contexts.

Energy and technology lessons since Rio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edmonds, James A.; Calvin, Katherine V.; Clarke, Leon E.

2012-11-01

The 1992 Framework Convention on Climate Change created the basic international architecture for addressing climate change. That treaty was negotiated at a time when the research literature examining emissions mitigation and the role of energy technology was relatively limited. In the two subsequent decades a great deal has been learned. The problem of stabilizing the concentration of greenhouse gases in the atmosphere has proved far more difficult than envisioned in 1992 and the role of technology appears even more important when emissions mitigation strategies are co-developed in the context of multiple competing ends.

Preparing for a Global Scientific Workforce: Lessons Learned by the Chemistry Community

NASA Astrophysics Data System (ADS)

Baranovic, M.; Nameroff, T.

2005-12-01

Globalization has significant implications for science, science education, and the workforce. Flows of capital and knowledge are altering patterns of economic and technological development. Technology is allowing science to be conducted in real time on a global scale. International connections and mobility are increasing worldwide. At the same time science is becoming a truly global endeavor, the convergence of disciplines suggests that scientists from different backgrounds can learn from each other's experiences in addressing these challenges and opportunities. This presentation reviews some of the impacts of globalization on the chemically related sciences, students, and profession. As a result of globalization, today's practitioners of chemistry need an ever-expanding skill set to succeed. In addition to a strong command of the basic principles of chemistry, students and practitioners need to know how to work on multicultural teams, have knowledge of other languages, and be able to communicate effectively. The American Chemical Society (ACS) is coming to terms with and responding to changes in the nature of chemistry and its practice. This presentation will explore some of the innovative efforts of ACS to meet the challenges for chemistry in an era of globalization. The Earth and space sciences community may benefit from the chemistry community's "lessons learned."

Improving the primary school science learning unit about force and motion through lesson study

NASA Astrophysics Data System (ADS)

Phaikhumnam, Wuttichai; Yuenyong, Chokchai

2018-01-01

The study aimed to develop primary school science lesson plan based on inquiry cycle (5Es) through lesson study. The study focused on the development of 4 primary school science lesson plans of force and motion for Grade 3 students in KKU Demonstration Primary School (Suksasart), first semester of 2015 academic year. The methodology is mixed method. The Inthaprasitha (2010) lesson study cycle was implemented in group of KKU Demonstration Primary School. Instruments of reflection of lesson plan developing included participant observation, meeting and reflection report, lesson plan and other document. The instruments of examining students' learning include classroom observation and achievement test. Data was categorized from these instruments to find the issues of changing and improving the good lesson plan of Thai primary school science learning. The findings revealed that teachers could develop the lesson plans through lesson study. The issues of changing and improving were disused by considering on engaging students related to societal issues, students' prior knowledge, scientific concepts for primary school students, and what they learned from their changing. It indicated that the Lesson Study allowed primary school science teachers to share ideas and develop ideas to improve the lesson. The study may have implications for Thai science teacher education through Lesson Study.

Advances in CRISPR-Cas9 genome engineering: lessons learned from RNA interference

PubMed Central

Barrangou, Rodolphe; Birmingham, Amanda; Wiemann, Stefan; Beijersbergen, Roderick L.; Hornung, Veit; Smith, Anja van Brabant

2015-01-01

The discovery that the machinery of the Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)-Cas9 bacterial immune system can be re-purposed to easily create deletions, insertions and replacements in the mammalian genome has revolutionized the field of genome engineering and re-invigorated the field of gene therapy. Many parallels have been drawn between the newly discovered CRISPR-Cas9 system and the RNA interference (RNAi) pathway in terms of their utility for understanding and interrogating gene function in mammalian cells. Given this similarity, the CRISPR-Cas9 field stands to benefit immensely from lessons learned during the development of RNAi technology. We examine how the history of RNAi can inform today's challenges in CRISPR-Cas9 genome engineering such as efficiency, specificity, high-throughput screening and delivery for in vivo and therapeutic applications. PMID:25800748

Learning to Lead, Leading to Learn: How Facilitators Learn to Lead Lesson Study

ERIC Educational Resources Information Center

Lewis, Jennifer M.

2016-01-01

This article presents research on how teacher developers in the United States learn to conduct lesson study. Although the practice of lesson study is expanding rapidly in the US, high-quality implementation requires skilled facilitation. In contexts such as the United States where this form of professional development is relatively novel, few…

Flying SATS Higher Volume Operations: Training, Lessons Learned, and Pilots' Experiences

NASA Technical Reports Server (NTRS)

Conway, Sheila; Williams, Dan; Adams, Catherine; Consiglio, Maria; Murdoch, Jennifer

2005-01-01

Developments in aviation, including new surveillance technologies and quicker, more economical small aircraft, have been identified as driving factors in a potential expansion of the use of non-towered, non-radar airports. The Small Aircraft Transportation System (SATS) project has developed the Higher Volume Operations (HVO) concept that enables pilots to safely arrive and depart these airports in instrument conditions at an increased rate as compared to today's procedures. This is achieved by transferring some traffic management tasks to centralized, ground-based automation, while assigning others to participating pilots aided by on-board tools. This paper describes strategies and lessons learned while training pilots to fly these innovative operations. Pilot approaches to using the experimental displays and dynamic altering systems during training are discussed. Potential operational benefits as well as pit-falls and frustrations expressed by subjects while learning to fly these new procedures are presented. Generally, pilots were comfortable with the procedures and the training process, and expressed interest in its near-term implementation.

Real-time adaptive off-road vehicle navigation and terrain classification

NASA Astrophysics Data System (ADS)

Muller, Urs A.; Jackel, Lawrence D.; LeCun, Yann; Flepp, Beat

2013-05-01

We are developing a complete, self-contained autonomous navigation system for mobile robots that learns quickly, uses commodity components, and has the added benefit of emitting no radiation signature. It builds on the au­tonomous navigation technology developed by Net-Scale and New York University during the Defense Advanced Research Projects Agency (DARPA) Learning Applied to Ground Robots (LAGR) program and takes advantage of recent scientific advancements achieved during the DARPA Deep Learning program. In this paper we will present our approach and algorithms, show results from our vision system, discuss lessons learned from the past, and present our plans for further advancing vehicle autonomy.

Solid-State Lighting: Early Lessons Learned on the Way to Market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandahl, Linda J.; Cort, Katherine A.; Gordon, Kelly L.

2013-12-31

The purpose of this report is to document early challenges and lessons learned in the solid-state lighting (SSL) market development as part of the DOE’s SSL Program efforts to continually evaluate market progress in this area. This report summarizes early actions taken by DOE and others to avoid potential problems anticipated based on lessons learned from the market introduction of compact fluorescent lamps and identifies issues, challenges, and new lessons that have been learned in the early stages of the SSL market introduction. This study identifies and characterizes12 key lessons that have been distilled from DOE SSL program results.

ACTS Ka-Band Earth Stations: Technology, Performance, and Lessons Learned

NASA Technical Reports Server (NTRS)

Reinhart, Richard C.; Struharik, Steven J.; Diamond, John J.; Stewart, David

2000-01-01

The Advanced Communications Technology Satellite (ACTS) Project invested heavily in prototype Ka-band satellite ground terminals to conduct an experiments program with the ACTS satellite. The ACTS experiment's program proposed to validate Ka-band satellite and ground station technology. demonstrate future telecommunication services. demonstrate commercial viability and market acceptability of these new services, evaluate system networking and processing technology, and characterize Ka-band propagation effects, including development of techniques to mitigate signal fading. This paper will present a summary of the fixed ground terminals developed by the NASA Glenn Research Center and its industry partners, emphasizing the technology and performance of the terminals (Part 1) and the lessons learned throughout their six year operation including the inclined orbit phase of operations (Full Report). An overview of the Ka-band technology and components developed for the ACTS ground stations is presented. Next. the performance of the ground station technology and its evolution during the ACTS campaign are discussed to illustrate the technical tradeoffs made during the program and highlight technical advances by industry to support the ACTS experiments program and terminal operations. Finally. lessons learned during development and operation of the user terminals are discussed for consideration of commercial adoption into future Ka-band systems. The fixed ground stations used for experiments by government, academic, and commercial entities used reflector based offset-fed antenna systems ranging in size from 0.35m to 3.4m antenna diameter. Gateway earth stations included two systems, referred to as the NASA Ground Station (NGS) and the Link Evaluation Terminal (LET). The NGS provides tracking, telemetry, and control (TT&C) and Time Division Multiple Access (TDMA) network control functions. The LET supports technology verification and high data rate experiments. The ground stations successfully demonstrated many services and applications at Ka-band in three different modes of operation: circuit switched TDMA using the satellite on-board processor, satellite switched SS-TDMA applications using the on-board Microwave Switch Matrix (MSM), and conventional transponder (bent-pipe) operation. Data rates ranged from 4.8 kbps up to 622 Mbps. Experiments included: 1) low rate (4.8- 1 00's kbps) remote data acquisition and control using small earth stations, 2) moderate rate (1-45 Mbps) experiments included full duplex voice and video conferencing and both full duplex and asymmetric data rate protocol and network evaluation using mid-size ground stations, and 3) link characterization experiments and high data rate (155-622 Mbps) terrestrial and satellite interoperability application experiments conducted by a consortium of experimenters using the large transportable ground stations.

Lessons Learned Study Final Report for the Exploration Systems Mission Directorate

NASA Technical Reports Server (NTRS)

Van Laak, Jim; Brumfield, M. Larry; Moore, Arlene A.; Anderson, Brooke; Dempsey, Jim; Gifford, Bob; Holloway, Chip; Johnson, Keith

2004-01-01

This report is the final product of a 90-day study performed for the Exploration Systems Mission Directorate. The study was to assemble lessons NASA has learned from previous programs that could help the Exploration Systems Mission Directorate pursue the Exploration vision. It focuses on those lessons that should have the greatest significance to the Directorate during the formulation of program and mission plans. The study team reviewed a large number of lessons learned reports and data bases, including the Columbia Accident Investigation Board and Rogers Commission reports on the Shuttle accidents, accident reports from robotic space flight systems, and a number of management reviews by the Defense Sciences Board, Government Accountability Office, and others. The consistency of the lessons, findings, and recommendations validate the adequacy of the data set. In addition to reviewing existing databases, a series of workshops was held at each of the NASA centers and headquarters that included senior managers from the current workforce as well as retirees. The full text of the workshop reports is included in Appendix A. A lessons learned website was opened up to permit current and retired NASA personnel and on-site contractors to input additional lessons as they arise. These new lessons, when of appropriate quality and relevance, will be brought to the attention of managers. The report consists of four parts: Part 1 provides a small set of lessons, called the Executive Lessons Learned, that represent critical lessons that the Exploration Systems Mission Directorate should act on immediately. This set of Executive Lessons and their supporting rationale have been reviewed at length and fully endorsed by a team of distinguished NASA alumni; Part 2 contains a larger set of lessons, called the Selected Lessons Learned, which have been chosen from the lessons database and center workshop reports on the basis of their specific significance and relevance to the near-term work of the Exploration Directorate. These lessons frequently support the Executive lessons but are more general in nature; Part 3 consists of the reports of the center workshops that were conducted as part of this activity. These reports are included in their entirety (approximately 200 pages) in Appendix G and have significance for specific managers; Part 4 consists of the remainder of the lessons that have been selected by this effort and assembled into a database for the use of the Explorations Directorate. The database is archived and hosted in the Lessons Learned Knowledge Network, which provides a flexible search capability using a wide variety of search terms. Finally, a spreadsheet lists databases searched and a bibliography identifies reports that have been reviewed as sources of lessons for this task. NASA has been presented with many learning opportunities. We have conducted numerous programs, some extremely successful and others total failures. Most have been documented with a formal lessons learned activity, but we have not always incorporated these learning opportunities into our normal modes of business. For example, the Robbins Report of 2001 clearly indicates that many project failures of the past two decades were the result of violating well documented best practices, often in direct violation of management instructions and directives. An overarching lesson emerges: that disciplined execution in accordance with proven best practices is the greatest single contributor to a successful program. The Lessons Learned task team offers a sincere hope that the lessons presented herein will be helpful to the Exploration Systems Directorate in charting and executing their course. The success of the Directorate and of NASA in general depends on our collective ability to move forward without having to relearn the lessons of those who have gone before.

3D animation model with augmented reality for natural science learning in elementary school

NASA Astrophysics Data System (ADS)

Hendajani, F.; Hakim, A.; Lusita, M. D.; Saputra, G. E.; Ramadhana, A. P.

2018-05-01

Many opinions from primary school students' on Natural Science are a difficult lesson. Many subjects are not easily understood by students, especially on materials that teach some theories about natural processes. Such as rain process, condensation and many other processes. The difficulty that students experience in understanding it is that students cannot imagine the things that have been taught in the material. Although there is material to practice some theories but is actually quite limited. There is also a video or simulation material in the form of 2D animated images. Understanding concepts in natural science lessons are also poorly understood by students. Natural Science learning media uses 3-dimensional animation models (3D) with augmented reality technology, which offers some visualization of science lessons. This application was created to visualize a process in Natural Science subject matter. The hope of making this application is to improve student's concept. This app is made to run on a personal computer that comes with a webcam with augmented reality. The app will display a 3D animation if the camera can recognize the marker.

Utilization of Lesson Analysis as Teacher Self Reflection to Improve the Lesson Design on Chemical Equation Topic

NASA Astrophysics Data System (ADS)

Edyani, E. A.; Supriatna, A.; Kurnia; Komalasari, L.

2017-02-01

The research is aimed to investigate how lesson analysis as teacher’s self-reflection changes the teacher’s lesson design on chemical equation topic. Lesson Analysis has been used as part of teacher training programs to improve teacher’s ability in analyzing their own lesson. The method used in this research is a qualitative method. The research starts from build lesson design, implementation lesson design to senior high school student, utilize lesson analysis to get information about the lesson, and revise lesson design. The revised lesson design from the first implementation applied to the second implementation, resulting in better design. This research use lesson analysis Hendayana&Hidayat framework. Video tapped and transcript are employed on each lesson. After first implementation, lesson analysis result shows that teacher-centered still dominating the learning because students are less active in discussion, so the part of lesson design must be revised. After second implementation, lesson analysis result shows that the learning already student-centered. Students are very active in discussion. But some part of learning design still must be revised. In general, lesson analysis was effective for teacher to reflect the lessons. Teacher can utilize lesson analysis any time to improve the next lesson design.

The subsurface geology of Río Tinto: material examined during a simulated Mars drilling mission for the Mars Astrobiology Research and Technology Experiment (MARTE).

PubMed

Prieto-Ballesteros, Olga; Martínez-Frías, Jesús; Schutt, John; Sutter, Brad; Heldmann, Jennifer L; Bell, Mary Sue; Battler, Melissa; Cannon, Howard; Gómez-Elvira, Javier; Stoker, Carol R

2008-10-01

The 2005 Mars Astrobiology Research and Technology Experiment (MARTE) project conducted a simulated 1-month Mars drilling mission in the Río Tinto district, Spain. Dry robotic drilling, core sampling, and biological and geological analytical technologies were collectively tested for the first time for potential use on Mars. Drilling and subsurface sampling and analytical technologies are being explored for Mars because the subsurface is the most likely place to find life on Mars. The objectives of this work are to describe drilling, sampling, and analytical procedures; present the geological analysis of core and borehole material; and examine lessons learned from the drilling simulation. Drilling occurred at an undisclosed location, causing the science team to rely only on mission data for geological and biological interpretations. Core and borehole imaging was used for micromorphological analysis of rock, targeting rock for biological analysis, and making decisions regarding the next day's drilling operations. Drilling reached 606 cm depth into poorly consolidated gossan that allowed only 35% of core recovery and contributed to borehole wall failure during drilling. Core material containing any indication of biology was sampled and analyzed in more detail for its confirmation. Despite the poorly consolidated nature of the subsurface gossan, dry drilling was able to retrieve useful core material for geological and biological analysis. Lessons learned from this drilling simulation can guide the development of dry drilling and subsurface geological and biological analytical technologies for future Mars drilling missions.

The Subsurface Geology of Río Tinto: Material Examined During a Simulated Mars Drilling Mission for the Mars Astrobiology Research and Technology Experiment (MARTE)

NASA Astrophysics Data System (ADS)

Prieto-Ballesteros, Olga; Martínez-Frías, Jesús; Schutt, John; Sutter, Brad; Heldmann, Jennifer L.; Bell Johnson, Mary Sue; Battler, Melissa; Cannon, Howard; Gómez-Elvira, Javier; Stoker, Carol R.

2008-10-01

The 2005 Mars Astrobiology Research and Technology Experiment (MARTE) project conducted a simulated 1-month Mars drilling mission in the Río Tinto district, Spain. Dry robotic drilling, core sampling, and biological and geological analytical technologies were collectively tested for the first time for potential use on Mars. Drilling and subsurface sampling and analytical technologies are being explored for Mars because the subsurface is the most likely place to find life on Mars. The objectives of this work are to describe drilling, sampling, and analytical procedures; present the geological analysis of core and borehole material; and examine lessons learned from the drilling simulation. Drilling occurred at an undis closed location, causing the science team to rely only on mission data for geological and biological interpretations. Core and borehole imaging was used for micromorphological analysis of rock, targeting rock for biological analysis, and making decisions regarding the next day's drilling operations. Drilling reached 606 cm depth into poorly consolidated gossan that allowed only 35% of core recovery and contributed to borehole wall failure during drilling. Core material containing any indication of biology was sampled and analyzed in more detail for its confirmation. Despite the poorly consolidated nature of the subsurface gossan, dry drilling was able to retrieve useful core material for geological and biological analysis. Lessons learned from this drilling simulation can guide the development of dry drilling and subsurface geological and biological analytical technologies for future Mars drilling missions.

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

NASA Technical Reports Server (NTRS)

Venkatapathy, Ethiraj; Beck, Robin; Ellerby, Donald; Feldman, Jay; Gage, Peter; Munk, Michelle; Wercinski, Paul

2016-01-01

NASA's Space Technology Mission Directorate (STMD) and the Game Changing Development Program (GCDP) were created to develop new technologies. This paper describes four entry system technologies that are funded by the GCDP and summarizes the lessons learned during the development. The investments are already beginning to show success, mission infusion pathways after five years of existence. It is hoped that our experience and observations, drawn from projects supported by the GCD program/STMD, Orion and SMD can help current and future technology development projects. Observations on fostering a culture of success and on constraints that limit greater success are also provided.