Screening Methodologies to Support Risk and Technology ...

EPA Pesticide Factsheets

The Clean Air Act establishes a two-stage regulatory process for addressing emissions of hazardous air pollutants (HAPs) from stationary sources. In the first stage, the Act requires the EPA to develop technology-based standards for categories of industrial sources. We have largely completed the required “Maximum Achievable Control Technology” (MACT) standards. In the second stage of the regulatory process, EPA must review each MACT standard at least every eight years and revise them as necessary, “taking into account developments in practices, processes and control technologies.” We call this requirement the “technology review.” EPA is also required to complete a one-time assessment of the health and environmental risks that remain after sources come into compliance with MACT. This residual risk review also must be done within 8 years of setting the initial MACT standard. If additional risk reductions are necessary to protect public health with an ample margin of safety or to prevent adverse environmental effects, EPA must develop standards to address these remaining risks. Because the risk review is an important component of the RTR process, EPA is seeking SAB input on the scientific credibility of specific enhancements made to our risk assessment methodologies, particularly with respect to screening methodologies, since the last SAB review was completed in 2010. These enhancements to our risk methodologies are outlined in the document title

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2012 CFR

2012-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2014 CFR

2014-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

40 CFR 63.43 - Maximum achievable control technology (MACT) determinations for constructed and reconstructed...

Code of Federal Regulations, 2013 CFR

2013-07-01

... achieving such emission reduction and any non-air quality health and environmental impacts and energy..., and analysis of cost and non-air quality health environmental impacts or energy requirements for the...-day period for submittal of public comment; and (iii) A notice by prominent advertisement in the area...

Mount Sinai leverages smartphone technology, aiming to boost care, coordination of ED patients while also trimming costs.

PubMed

2015-05-01

Mount Sinai Hospital in New York, NY, is using smartphone technology to enhance follow-up calls to senior patients who have visited the ED, and to help provide acute-level care to select patients in their own homes. Investigators are hoping to show that these approaches can improve care and coordination while trimming costs, and they expect that patients will approve of these new approaches as well. While senior patients are still in the ED, nurse coordinators will work with them to load a HIPAA-compliant application to their smartphones so they can conduct face-to-face follow-up calls that meet HIPAA standards. Nurses say the face-to-face communications enhance their ability to assess how patients are doing following their ED visit. The hospital is also testing a program that enables some ED patients who meet inpatient criteria to receive this care in the home setting through the use of a mobile acute care team (MACT). In the case of emergencies, the MACT team relies on community paramedics who will visit the patients' homes and provide care under the direction of MACT physicians who are linked in to these visits via smartphone technology.

Maximum Achievable Control Technology Standards in Region 7

EPA Pesticide Factsheets

Maximum Achievable Control Technology Standards (MACTs) are applicable requirements under the Title V operating permit program. This is a resource for permit writers and reviewers to learn about the rules and explore other helpful tools.

An event-related potential investigation of spatial attention orientation in children trained with mental abacus calculation.

PubMed

Liu, Xiaoqin; Sun, Yanchao

2017-01-01

The objective of this study was to investigate the effects of long-term mental abacus calculation training (MACT) on children's spatial attention orientation. Fifteen children with intensive MACT (MACT group) and 15 children without MACT (non-MACT group) were selected. The two groups of children were matched in age, sex, handedness, and academic grade. The participants were tested with a Posner spatial cueing task while their neural activities were recorded with a 32-channel electroencephalogram system. The participants' behavior scores (reaction time and accuracy) as well as early components of event-related potential (ERP) during the tests were statistically analyzed. The behavioral scores showed no significant difference between the two groups of children, although the MACT group tended to have a shorter reaction time. The early ERP components showed that under valid cueing condition, the MACT group had significantly higher P1 amplitude [F(1, 28)=5.06, P<0.05, effective size=0.72] and lower N1 amplitude [F(1, 28)=6.05, P<0.05, effective size=0.82] in the occipital region compared with the non-MACT group. In the centrofrontal brain region, the MACT group had lower N1 amplitude [F(1, 28)=4.89, P<0.05, effect size=0.70] and longer N1 latency [F(1, 28)=6.26, P<0.05, effect size=0.80] than the non-MACT group. In particular, the MACT group also showed a higher centrofrontal P2 amplitude in the right hemisphere [F(1, 28)=4.82, P<0.05, effect size 0.81] compared with the left hemisphere and the middle location. MACT enhances the children's spatial attention orientation, which can be detected in the early components of ERP.

Dry Cleaning Facilities: National Perchloroethylene Air Emission Standards

EPA Pesticide Factsheets

Learn about the Maximum Achievable Control Technology (MACT) standards for dry cleaning facilities. Find the rule history information, federal register citations, legal authority, and additional resources.

Ethylene Production Maximum Achievable Control Technology (MACT) Compliance Manual

EPA Pesticide Factsheets

This July 2006 document is intended to help owners and operators of ethylene processes understand and comply with EPA's maximum achievable control technology standards promulgated on July 12, 2002, as amended on April 13, 2005 and April 20, 2006.

Overview of the U.S. Environmental Protection Agency's Hazardous Air Pollutant Early Reduction Program.

PubMed

Laznow, J; Daniel, J

1992-01-01

Under provision of the Clean Air Act Amendments of 1990 Title III, the EPA has proposed a regulation (Early Reduction Program) to allow a six-year compliance extension from Maximum Achievable Control Technology (MACT) standards for sources that voluntarily reduce emissions of Hazardous Air Pollutants (HAPs) by 90 percent or more (95 percent or more for particulates) from a base year of 1987 or later. The emission reduction must be made before the applicable MACT standard is proposed for the source category or be subject to an enforceable commitment to achieve the reduction by January 1, 1994 for sources subject to MACT standards prior to 1994. The primary purpose of this program is to encourage reduction of HAPs emissions sooner than otherwise required. Industry would be allowed additional time in evaluating emission reduction options and developing more cost-effective compliance strategies, although, under strict guidelines to ensure actual, significant and verifiable emission reductions occur.

Halogenated Solvent Cleaning: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Learn about the Maximum Achievable Control Technology (MACT) standards for halogenated solvent cleaner. Find the rule history information, federal register citations, legal authority, and additional resources.

Evaluation of native hyaline cartilage and repair tissue after two cartilage repair surgery techniques with 23Na MR imaging at 7 T: initial experience.

PubMed

Zbýň, S; Stelzeneder, D; Welsch, G H; Negrin, L L; Juras, V; Mayerhoefer, M E; Szomolanyi, P; Bogner, W; Domayer, S E; Weber, M; Trattnig, S

2012-08-01

To compare the sodium normalized mean signal intensity (NMSI) values between patients after bone marrow stimulation (BMS) and matrix-associated autologous chondrocyte transplantation (MACT) cartilage repair procedures. Nine BMS and nine MACT patients were included. Each BMS patient was matched with one MACT patient according to age [BMS 36.7 ± 10.7 (mean ± standard deviation) years; MACT 36.9 ± 10.0 years], postoperative interval (BMS 33.5 ± 25.3 months; MACT 33.2 ± 25.7 months), and defect location. All magnetic resonance imaging (MRI) measurements were performed on a 7 T system. Proton images served for morphological evaluation of repair tissue using the magnetic resonance observation of cartilage repair tissue (MOCART) scoring system. Sodium NMSI values in the repair area and morphologically normal cartilage were calculated. Clinical outcome was assessed right after MRI. Analysis of covariance, t-tests, and Pearson correlation coefficients were evaluated. Sodium NMSI was significantly lower in BMS (P = 0.004) and MACT (P = 0.006) repair tissue, compared to reference cartilage. Sodium NMSI was not different between the reference cartilage in MACT and BMS patients (P = 0.664), however it was significantly higher in MACT than in BMS repair tissue (P = 0.028). Better clinical outcome was observed in BMS than in MACT patients. There was no difference between MOCART scores for MACT and BMS patients (P = 0.915). We did not observe any significant correlation between MOCART score and sodium repair tissue NMSI (r = -0.001; P = 0.996). Our results suggest higher glycosaminoglycan (GAG) content, and therefore, repair tissue of better quality in MACT than in BMS patients. Sodium imaging might be beneficial in non-invasive evaluation of cartilage repair surgery efficacy. Copyright © 2012 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Cellulose Products Manufacturing: National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

Read the National Emission Standards for Hazardous Air Pollutants (NESHAP) for Cellulose Products Manufacturing, see the rule history for this Maximum Achievable Control Technology (MACT), and find Compliance help for this source.

MERCURY SPECIATION AND CAPTURE

EPA Science Inventory

In December 2000, the U.S. Environmental Protection Agency (USEPA) announced its intent to regulate mercury emissions from coal-fired electric utility steam generating plants. Maximum achievable control technology (MACT) requirements are to be proposed by December 2003 and finali...

Plasmid transfection in bovine cells: Optimization using a realtime monitoring of green fluorescent protein and effect on gene reporter assay.

PubMed

Osorio, Johan S; Bionaz, Massimo

2017-08-30

Gene reporter technology (GRT) has opened several new avenues for monitoring biological events including the activation of transcription factors, which are central to the study of nutrigenomics. However, this technology relies heavily on the insertion of foreign plasmid DNA into the nuclei of cells (i.e., transfection), which can be very challenging and highly variable among cell types. The objective of this study was to investigate the optimal conditions to generate reliable GRT assay data on bovine immortalized cell lines, Madin Darby Bovine Kidney (MDBK) and bovine mammary epithelial alveolar (MACT) cells. Results are reported for two experiments. In Experiment 1, using 96 well-plate and a robotic inverted fluorescent microscope, we compared transfection efficiency among commercially available transfection reagents (TR) Lipofectamine® 3000 (Lipo3), Lipofectamine® LTX (LipoLTX), and TransIT-X2® (TransX2), three doses of TR (i.e., 0.15, 0.3, and 0.4μL/well), and three doses of Green Fluorescent Protein plasmid DNA (i.e., 10, 25, and 50ng/well). Transfection efficiency and mortality rate were analyzed using CellProfiler software. Transfection efficiency increased until the end of the experiment (20h post-transfection) at which point MACT had greater transfection than MDBK cells (16.3% vs. 2.2%). It is unclear the reason for the low transfection in MDBK cells. Maximal transfection efficiency was obtained with 0.3μL/well of LipoLTX plus 25ng/well of plasmid DNA (ca. 29.5±1.9%) and 0.15μL/well of LipoLTX plus 25ng/well of plasmid DNA (ca. 4.0±0.4%) for MACT and MDBK cells, respectively. The higher amount of TR and DNA was generally associated with higher cell mortality. Using high, medium, and low transfection efficiency conditions determined in Experiment 1, we performed a GRT assay for peroxisome proliferator-activated response element (PPRE) luciferase in MACT and MDBK cells treated with 10nM or 100nM of synthetic Peroxisome Proliferator-activated Receptor β/σ (PPARβ/σ) agonist. The GRT assay was unaffected by poor transfection in MACT cells although the high transfection hampered the possibility of detecting differences between 10 and 100nM of the PPARβ/δ agonist. In MDBK cells, low transfection efficiency (<2.0%) failed to detect any differences with GRT assay. The level of transfection was positively associated with a lower coefficient of variation of GRT data. Overall, our data indicates that results of GRT assays are affected by transfection efficiency and a minimum transfection of 2% is required. Thus, factors such as TR type, TR amount, and DNA plasmid amount need to be optimized for a specific cell type before performing GRT assays. Copyright © 2017 Elsevier B.V. All rights reserved.

Compliance Options Diagrams for the Paper and Other Web Coating National Emission Standards for Hazardous Air Pollutants (NESHAP)

EPA Pesticide Factsheets

This January 2004 document contains 14 diagrams illustrating the different compliance options available for those facilities that fall under the Paper and Web Coating Maximum Achievable control Technology (MACT).

Pollution prevention options to meet impending MACT standards: A compendium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Berglund, R.L.; Pickron, J.S.

1997-12-31

Under the Clean Air Act Amendments of 1990, the EPA was charged with developing MACT standards for a large group of operations representing a variety of different industry categories. While pollution prevention opportunities for meeting the requirements of the HON standards for the synthetic organic chemical manufacturing industry (SOCMI) and similar standards for the refining industry have drawn significant discussion and attention, little guidance for considering pollution prevention options for meeting other MACT standards have been provided. Yet, in working with companies to meet the requirements of proposed MACT standards for the shipbuilding, wood processing, plastics and gas processing industries,more » a number of pollution prevention opportunities for meeting these requirements were identified in early compliance strategies. This paper will provide a compendium of pollution prevention options for meeting these and other proposed and promulgated MACT standards.« less

Effects of ketamine and lidocaine in combination on the sevoflurane minimum alveolar concentration in alpacas

PubMed Central

Queiroz-Williams, Patricia; Doherty, Thomas J.; da Cunha, Anderson F.; Leonardi, Claudia

2016-01-01

This study investigated the effects of ketamine and lidocaine in combination on the minimum alveolar concentration of sevoflurane (MACSEVO) in alpacas. Eight healthy, intact male, adult alpacas were studied on 2 separate occasions. Anesthesia was induced with SEVO, and baseline MAC (MACB) determination began 45 min after induction. After MACB determination, alpacas were randomly given either an intravenous (IV) loading dose (LD) and infusion of saline or a loading dose [ketamine = 0.5 mg/kg body weight (BW); lidocaine = 2 mg/kg BW] and an infusion of ketamine (25 μg/kg BW per minute) in combination with lidocaine (50 μg/kg BW per minute), and MACSEVO was re-determined (MACT). Quality of recovery, time-to-extubation, and time-to-standing, were also evaluated. Mean MACB was 1.88% ± 0.13% and 1.89% ± 0.14% for the saline and ketamine + lidocaine groups, respectively. Ketamine and lidocaine administration decreased (P < 0.05) MACB by 57% and mean MACT was 0.83% ± 0.10%. Saline administration did not change MACB. Time to determine MACB and MACT was not significantly different between the treatments. The quality of recovery, time-to-extubation, and time-to-standing, were not different between groups. The infusion of ketamine combined with lidocaine significantly decreased MACSEVO by 57% and did not adversely affect time-to-standing or quality of recovery. PMID:27127341

Effects of ketamine and lidocaine in combination on the sevoflurane minimum alveolar concentration in alpacas.

PubMed

Queiroz-Williams, Patricia; Doherty, Thomas J; da Cunha, Anderson F; Leonardi, Claudia

2016-04-01

This study investigated the effects of ketamine and lidocaine in combination on the minimum alveolar concentration of sevoflurane (MACSEVO) in alpacas. Eight healthy, intact male, adult alpacas were studied on 2 separate occasions. Anesthesia was induced with SEVO, and baseline MAC (MACB) determination began 45 min after induction. After MACB determination, alpacas were randomly given either an intravenous (IV) loading dose (LD) and infusion of saline or a loading dose [ketamine = 0.5 mg/kg body weight (BW); lidocaine = 2 mg/kg BW] and an infusion of ketamine (25 μg/kg BW per minute) in combination with lidocaine (50 μg/kg BW per minute), and MACSEVO was re-determined (MACT). Quality of recovery, time-to-extubation, and time-to-standing, were also evaluated. Mean MACB was 1.88% ± 0.13% and 1.89% ± 0.14% for the saline and ketamine + lidocaine groups, respectively. Ketamine and lidocaine administration decreased (P < 0.05) MACB by 57% and mean MACT was 0.83% ± 0.10%. Saline administration did not change MACB. Time to determine MACB and MACT was not significantly different between the treatments. The quality of recovery, time-to-extubation, and time-to-standing, were not different between groups. The infusion of ketamine combined with lidocaine significantly decreased MACSEVO by 57% and did not adversely affect time-to-standing or quality of recovery.

Compliance with the Aerospace MACT Standard at Lockheed Martin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kurucz, K.L.; Vicars, S.; Fetter, S.

1997-12-31

Actions taken and planned at four Lockheed Martin Corporation (LMC) facilities to comply with the Aerospace MACT Standard are reviewed. Many LMC sites have taken proactive steps to reduce emissions and implement low VOC coating technology. Significant administrative, facility, and material challenges remain to achieve compliance with the upcoming NESHAP and Control Technology Guideline (CTG) standards. The facilities discussed herein set up programs to develop and implement compliance strategies. These facilities manufacture military aircraft, missiles, satellites, rockets, and electronic guidance and communications systems. Some of the facilities are gearing up for new production lines subject to new source MACT standards.more » At this time the facilities are reviewing compliance status of all primers, topcoats, maskants and solvents subject to the standard. Facility personnel are searching for the most efficient methods of satisfying the recordkeeping, reporting and monitoring, sections of the standards while simultaneously preparing or reviewing their Title V permit applications. Facility decisions on paint booths are the next highest priority. Existing dry filter paint booths will be subject to the filtration standard for existing paint booths which requires the use of two-stage filters. Planned paint booths for the F-22 program, and other new booths must comply with the standard for new and rebuilt booths which requires three stage or HEPA filters. Facilities looking to replace existing water wash paint booths, and those required to retrofit the air handling equipment to accommodate the two-stage filters, are reviewing issues surrounding the rebuilt source definition.« less

The National Shipbuilding Research Program. Shipyard MACT Implementation Plan and Compliance Tools

DTIC Science & Technology

1996-06-01

display a currently valid OMB control number. 1. REPORT DATE JUN 1996 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE The National...ACHIEVABLE CONTROL TECHNOLOGY SECTION TWO: MODEL SHIPYARD IMPLEMENTATION PLAN SECTION THREE: THINNING RATION CALCULATION SHEETS FOR OPTIONS 2 & 3 AND...INTERPRETATION OF THE SHIPYARD MAXIMUM ACHIEVABLE CONTROL TECHNOLOGY EPA’s Maximum Achievable Control Technology Rule for Shipyards: A Plain English

Report: Additional Analyses of Mercury Emissions Needed Before EPA Finalizes Rules for Coal-Fired Electric Utilities

EPA Pesticide Factsheets

Report #2005-P-00003, February 3, 2005. Evidence indicates that EPA senior management instructed EPA staff to develop a Maximum Achievable Control Technology (MACT) standard for mercury that would result in national emissions of 34 tons annually.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richard D. Boardman; B. H. O'Brien; N. R. Soelberg

About one million gallons of acidic, hazardous, and radioactive sodium-bearing waste are stored in stainless steel tanks at the Idaho Nuclear Technology and Engineering Center (INTEC), which is a major operating facility of the Idaho National Engineering and Environmental Laboratory. Calcination at high-temperature conditions (600 C, with alumina nitrate and calcium nitrate chemical addition to the feed) is one of four options currently being considered by the Department of Energy for treatment of the remaining tank wastes. If calcination is selected for future processing of the sodium-bearing waste, it will be necessary to install new off-gas control equipment in themore » New Waste Calcining Facility (NWCF) to comply with the Maximum Achievable Control Technology (MACT) standards for hazardous waste combustors and incinerators. This will require, as a minimum, installing a carbon bed to reduce mercury emissions from their current level of up to 7,500 to <45 {micro}g/dscm, and a staged combustor to reduce unburned kerosene fuel in the off-gas discharge to <100 ppm CO and <10 ppm hydrocarbons. The staged combustor will also reduce NOx concentrations of about 35,000 ppm by 90-95%. A pilot-plant calcination test was completed in a newly constructed 15-cm diameter calciner vessel. The pilot-plant facility was equipped with a prototype MACT off-gas control system, including a highly efficient cyclone separator and off-gas quench/venturi scrubber for particulate removal, a staged combustor for unburned hydrocarbon and NOx destruction, and a packed activated carbon bed for mercury removal and residual chloride capture. Pilot-plant testing was performed during a 50-hour system operability test January 14-16, followed by a 100-hour high-temperature calcination pilot-plant calcination run January 19-23. Two flowsheet blends were tested: a 50-hour test with an aluminum-to-alkali metal molar ratio (AAR) of 2.25, and a 50-hour test with an AAR of 1.75. Results of the testing indicate that sodium-bearing waste can be successfully calcined at 600 C with an AAR of 1.75. Unburned hydrocarbons are reduced to less than 10 ppm (7% O2, dry basis), with >90% reduction of NOx emissions. Mercury removal by the carbon bed reached 99.99%, surpassing the control efficiency needed to meet MACT emissions standards. No deleterious impacts on the carbon bed were observed during the tests. The test results imply that upgrading the NWCF calciner with a more efficient cyclone separator and the proposed MACT equipment can process the remaining tanks wastes in 3 years or less, and comply with the MACT standards.« less

EVALUATION OF BARRIERS TO THE USE OF RADIATION-CURED COATINGS IN SCREEN PRINTING

EPA Science Inventory

The report gives results of an evaluation of barriers to the use of radiation-cured coatings in screen printing. In support of the Source Reduction Review Project (SRRP), maximum achievable control technology (MACT) standards development, and the Pollution Prevention Act, EPA is ...

Paper and Other Web Coating Maximum Achievable Control Technology (MACT): Work Practice, Testing, Monitoring, Recordkeeping, and Reporting Summary Table

EPA Pesticide Factsheets

This April 2004 document is a table that details the various requirements of the Paper and Other Web Coating NESHAP, broken down by category. This table covers applicability, recordkeeping, emission limits, work practice standards, and other requirements

40 CFR 270.235 - Options for incinerators, cement kilns, lightweight aggregate kilns, solid fuel boilers, liquid...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Technology (MACT) Standards § 270.235 Options for incinerators, cement kilns, lightweight aggregate kilns... malfunction plan, design, and operating history. (2) Retain or add these permit requirements to the permit to... information including the source's startup, shutdown, and malfunction plan, design, and operating history; and...

Inputs to the Pulp and Paper Industry October 2011 Residual Risk Assessment

EPA Pesticide Factsheets

The U.S. Environmental Protection Agency (EPA) has to conduct risk assessments on each source category subject to MACT standards and determine if additional standards are needed to reduce residual risks.

77 FR 23622 - Approval and Promulgation of Air Quality Implementation Plans; Illinois; Leisure Properties LLC/D...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-20

....regulations.gov index. Although listed in the index, some information is not publicly available, e.g., CBI or... compliance with the Federal Maximum Achievable Control Technology (MACT) limits on volatile organic compounds... by non-atomized guns, and 33.4% HAPs for the gelcoat composition. These emission limits are...

Risk Assessment Document for Coke Oven MACT Residual Risk

EPA Pesticide Factsheets

The residual risk analysis described in this report addresses four coke plants subject to the 1993coke oven MACT standards (40 CFR Part 63 Subpart L) and estimates potential risks due to HAPsemissions from facilities involved in coking operations.

Assessment of articular cartilage repair tissue after matrix-associated autologous chondrocyte transplantation or the microfracture technique in the ankle joint using diffusion-weighted imaging at 3 Tesla.

PubMed

Apprich, S; Trattnig, S; Welsch, G H; Noebauer-Huhmann, I M; Sokolowski, M; Sokolwski, M; Hirschfeld, C; Stelzeneder, D; Domayer, S

2012-07-01

The objective was to compare patients after matrix-associated autologous chondrocyte transplantation (MACT) and microfracture therapy (MFX) of the talus using diffusion-weighted imaging (DWI), with morphological and clinical scoring. Twenty patients treated with MACT or MFX (10 per group) were examined using 3 T magnetic resonance imaging (MRI) at 48 ± 21.5 and 59.6 ± 23 months after surgery, respectively. For comparability, patients from each group were matched by age, body mass index, and follow-up. American Orthopaedic Foot and Ankle Society (AOFAS) score served as clinical assessment tool pre- and postoperatively. DWI was obtained using a partially balanced, steady-state gradient echo pulse sequence, as well as the Magnetic Resonance Observation of Cartilage Repair Tissue (MOCART) score, based on a 2D proton density-weighted turbo spin-echo sequence and a 3D isotropic true fast imaging with steady-state precession sequence. Semi-quantitative diffusion quotients were calculated after region of interest analysis of repair tissue (RT) and healthy control cartilage, and compared among both groups. The mean AOFAS score improved significantly (P = 0.001) for both groups (MACT: 48.8 ± 20.4-83.6 ± 9.7; MFX: 44.3 ± 16.5-77.6 ± 13.2). No differences in the AOFAS (P = 0.327) and MOCART (P = 0.720) score were observed between MACT and MFX postoperatively. DWI distinguished between healthy cartilage and cartilage RT in the MFX group (P = 0.016), but not after MACT treatment (P = 0.105). Significant correlations were found between MOCART score and DWI index after MFX (Pearson: -0.648; P = 0.043), and between the diffusivity and longer follow-up interval in MACT group (Pearson: -0.647, P = 0.043). Whereas conventional scores reveal a similar outcome after MACT or MFX treatment in the ankle joint, DWI was able to distinguish between different RT qualities, as reported histologically for these diverse surgical procedures. Copyright © 2012 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Protection of Bovine Mammary Epithelial Cells from Hydrogen Peroxide-Induced Oxidative Cell Damage by Resveratrol.

PubMed

Jin, Xiaolu; Wang, Kai; Liu, Hongyun; Hu, Fuliang; Zhao, Fengqi; Liu, Jianxin

2016-01-01

The mammary epithelial cells (MECs) of high-producing dairy cows are likely to be subject to oxidative stress (OS) due to the intensive cell metabolism. The objectives of this study were to investigate the cytoprotective effects of resveratrol against hydrogen peroxide- (H2O2-) induced OS in cultured bovine MECs (MAC-T). Pretreatment of MAC-T cells with resveratrol could rescue the decrease in cell viability and resulted in lower intracellular reactive oxygen species (ROS) accumulation after H2O2 exposure. Resveratrol helped MAC-T cells to prevent H2O2-induced endoplasmic reticulum stress and mitochondria-related cell apoptosis. Moreover, resveratrol induced mRNA expression of multiple antioxidant defense genes in MAC-T cells under normal/oxidative conditions. Nuclear factor erythroid 2-related factor 2 (Nrf2) was required for the cytoprotective effects on MAC-T cells by resveratrol, as knockdown of Nrf2 significantly abolished resveratrol-induced cytoprotective effects against OS. In addition, by using selective inhibitors, we further confirmed that the induction of Nrf2 by resveratrol was mediated through the prolonged activation of PI3K/Akt and ERK/MAPK pathways but negatively regulated by p38/MAPK pathway. Overall, resveratrol has beneficial effects on bovine MECs redox balance and may be potentially used as a therapeutic medicine against oxidative insult in lactating animals.

Boiler MACT Technical Assistance (Fact Sheet)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2012-03-01

Fact sheet describing the changes to Environmental Protection Act process standards. The DOE will offer technical assistance to ensure that major sources burning coal and oil have information on cost-effective, clean energy strategies for compliance, and to promote cleaner, more efficient boiler burning to cut harmful pollution and reduce operational costs. The U.S. Environmental Protection Agency (EPA) is expected to finalize the reconsideration process for its Clean Air Act pollution standards National Emissions Standards for Hazardous Air Pollutants for Major Sources: Industrial, Commercial, and Institutional Boilers and Process Heaters (known as Boiler Maximum Achievable Control Technology (MACT)), in Spring 2012.more » This rule applies to large and small boilers in a wide range of industrial facilities and institutions. The U.S. Department of Energy (DOE) will offer technical assistance to ensure that major sources burning coal or oil have information on cost-effective clean energy strategies for compliance, including combined heat and power, and to promote cleaner, more efficient boilers to cut harmful pollution and reduce operational costs.« less

Sodium Magnetic Resonance Imaging of Ankle Joint in Cadaver Specimens, Volunteers, and Patients After Different Cartilage Repair Techniques at 7 T

PubMed Central

Zbýň, Štefan; Brix, Martin O.; Juras, Vladimir; Domayer, Stephan E.; Walzer, Sonja M.; Mlynarik, Vladimir; Apprich, Sebastian; Buckenmaier, Kai; Windhager, Reinhard; Trattnig, Siegfried

2015-01-01

Objectives The goal of cartilage repair techniques such as microfracture (MFX) or matrix-associated autologous chondrocyte transplantation (MACT) is to produce repair tissue (RT) with sufficient glycosaminoglycan (GAG) content. Sodium magnetic resonance imaging (MRI) offers a direct and noninvasive evaluation of the GAG content in native cartilage and RT. In the femoral cartilage, this method was able to distinguish between RTs produced by MFX and MACT having different GAG contents. However, it needs to be clarified whether sodium MRI can be useful for evaluating RT in thin ankle cartilage. Thus, the aims of this 7-T study were (1) to validate our sodium MRI protocol in cadaver ankle samples, (2) to evaluate the sodium corrected signal intensities (cSI) in cartilage of volunteers, (3) and to compare sodium values in RT between patients after MFX and MACT treatment. Materials and Methods Five human cadaver ankle samples as well as ankles of 9 asymptomatic volunteers, 6 MFX patients and 6 MACT patients were measured in this 7-T study. Sodium values from the ankle samples were compared with histochemically evaluated GAG content. In the volunteers, sodium cSI values were calculated in the cartilages of ankle and subtalar joint. In the patients, sodium cSI in RT and reference cartilage were measured, morphological appearance of RT was evaluated using the magnetic resonance observation of cartilage repair tissue (MOCART) scoring system, and clinical outcome before and after surgery was assessed using the American Orthopaedic Foot and Ankle Society score and Modified Cincinnati Knee Scale. All regions of interest were defined on morphological images and subsequently transferred to the corresponding sodium images. Analysis of variance, t tests, and Pearson correlation coefficients were evaluated. Results In the patients, significantly lower sodium cSI values were found in RT than in reference cartilage for the MFX (P = 0.007) and MACT patients (P = 0.008). Sodium cSI and MOCART scores in RT did not differ between the MFX and MACT patients (P = 0.185). No significant difference in sodium cSI was found between reference cartilage of the volunteers and the patients (P = 0.355). The patients showed significantly higher American Orthopaedic Foot and Ankle Society and Modified Cincinnati scores after treatment than they did before treatment. In the volunteers, sodium cSI was significantly higher in the tibial cartilage than in the talar cartilage of ankle joint (P = 0.002) and in the talar cartilage than in the calcaneal cartilage of subtalar joint (P < 0.001). Data from the cadaver ankle samples showed a strong linear relationship between the sodium values and the histochemically determined GAG content (r = 0.800; P < 0.001; R2 = 0.639). Conclusions This study demonstrates the feasibility of in vivo quantification of sodium cSI, which can be used for GAG content evaluation in thin cartilages of ankle and subtalar joints at 7 T. A strong correlation observed between the histochemically evaluated GAG content and the sodium values proved the sufficient sensitivity of sodium MRI to changes in the GAG content of cartilages in the ankle. Both MFX and MACT produced RT with lower sodium cSI and, thus, of lower quality compared with reference cartilage in the patients or in the volunteers. Our results suggest that MFX and MACT produce RT with similar GAG content and similar morphological appearance in patients with similar surgery outcome. Sodium MRI at 7 T allows a quantitative evaluation of RT quality in the ankle and may thus be useful in the noninvasive assessment of new cartilage repair procedures. PMID:25436618

Sodium magnetic resonance imaging of ankle joint in cadaver specimens, volunteers, and patients after different cartilage repair techniques at 7 T: initial results.

PubMed

Zbýň, Štefan; Brix, Martin O; Juras, Vladimir; Domayer, Stephan E; Walzer, Sonja M; Mlynarik, Vladimir; Apprich, Sebastian; Buckenmaier, Kai; Windhager, Reinhard; Trattnig, Siegfried

2015-04-01

The goal of cartilage repair techniques such as microfracture (MFX) or matrix-associated autologous chondrocyte transplantation (MACT) is to produce repair tissue (RT) with sufficient glycosaminoglycan (GAG) content. Sodium magnetic resonance imaging (MRI) offers a direct and noninvasive evaluation of the GAG content in native cartilage and RT. In the femoral cartilage, this method was able to distinguish between RTs produced by MFX and MACT having different GAG contents. However, it needs to be clarified whether sodium MRI can be useful for evaluating RT in thin ankle cartilage. Thus, the aims of this 7-T study were (1) to validate our sodium MRI protocol in cadaver ankle samples, (2) to evaluate the sodium corrected signal intensities (cSI) in cartilage of volunteers, (3) and to compare sodium values in RT between patients after MFX and MACT treatment. Five human cadaver ankle samples as well as ankles of 9 asymptomatic volunteers, 6 MFX patients and 6 MACT patients were measured in this 7-T study. Sodium values from the ankle samples were compared with histochemically evaluated GAG content. In the volunteers, sodium cSI values were calculated in the cartilages of ankle and subtalar joint. In the patients, sodium cSI in RT and reference cartilage were measured, morphological appearance of RT was evaluated using the magnetic resonance observation of cartilage repair tissue (MOCART) scoring system, and clinical outcome before and after surgery was assessed using the American Orthopaedic Foot and Ankle Society score and Modified Cincinnati Knee Scale. All regions of interest were defined on morphological images and subsequently transferred to the corresponding sodium images. Analysis of variance, t tests, and Pearson correlation coefficients were evaluated. In the patients, significantly lower sodium cSI values were found in RT than in reference cartilage for the MFX (P = 0.007) and MACT patients (P = 0.008). Sodium cSI and MOCART scores in RT did not differ between the MFX and MACT patients (P = 0.185). No significant difference in sodium cSI was found between reference cartilage of the volunteers and the patients (P = 0.355). The patients showed significantly higher American Orthopaedic Foot and Ankle Society and Modified Cincinnati scores after treatment than they did before treatment. In the volunteers, sodium cSI was significantly higher in the tibial cartilage than in the talar cartilage of ankle joint (P = 0.002) and in the talar cartilage than in the calcaneal cartilage of subtalar joint (P < 0.001). Data from the cadaver ankle samples showed a strong linear relationship between the sodium values and the histochemically determined GAG content (r = 0.800; P < 0.001; R = 0.639). This study demonstrates the feasibility of in vivo quantification of sodium cSI, which can be used for GAG content evaluation in thin cartilages of ankle and subtalar joints at 7 T. A strong correlation observed between the histochemically evaluated GAG content and the sodium values proved the sufficient sensitivity of sodium MRI to changes in the GAG content of cartilages in the ankle. Both MFX and MACT produced RT with lower sodium cSI and, thus, of lower quality compared with reference cartilage in the patients or in the volunteers. Our results suggest that MFX and MACT produce RT with similar GAG content and similar morphological appearance in patients with similar surgery outcome. Sodium MRI at 7 T allows a quantitative evaluation of RT quality in the ankle and may thus be useful in the noninvasive assessment of new cartilage repair procedures.

[3T magnetic resonance T2 mapping for evaluation of cartilage repair after matrix-associated autologous chondrocyte transplantation].

PubMed

Zhang, Jun; Xu, Xian; Li, Xue; Chen, Min; Dong, Tian-Ming; Zuo, Pan-Li; An, Ning-Yu

2015-01-01

To assess the value of magnetic resonance imaging (MRI) T2 mapping in quantitative evaluation of cartilage repair following matrix-associated autologous chondrocyte transplantation (MACT). Six patients (with 9 plug cartilages) following MACT underwent MRI on a 3.0 Tesla MR scan system at 3, 6 and 12 months after the surgery. The full-thickness and zonal areas (deep and superficial layers) T2 values were calculated for the repaired cartilage and control cartilage. The mean T2 values of the repaired cartilage after MACT were significantly higher than that of the control cartilages at 3 and 6 months (P<0.05), but not at 12 months (P=0.063). At 6 and 12 months, the T2 values of the superficial layers were significantly higher than those of the deep layers in the repaired cartilages (P<0.05). The zonal (deep and superficial layers) T2 values of the repaired cartilages decreased significantly over time at 6 and 12 months as compared to those at 3 months after the surgery (P<0.05). MRI T2 mapping can serve as an important modality for assessing the repair of the articular cartilage following MACT.

Sodium Bearing Waste Processing Alternatives Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murphy, James Anthony; Palmer, Brent J; Perry, Keith Joseph

2003-12-01

A multidisciplinary team gathered to develop a BBWI recommendation to DOE-ID on the processing alternatives for the sodium bearing waste in the INTEC Tank Farm. Numerous alternatives were analyzed using a rigorous, systematic approach. The data gathered were evaluated through internal and external peer reviews for consistency and validity. Three alternatives were identified to be top performers: Risk-based Calcination, MACT to WIPP Calcination and Cesium Ion Exchange. A dual-path through early Conceptual design is recommended for MACT to WIPP Calcination and Cesium Ion Exchange since Risk-based Calcination does not require design. If calcination alternatives are not considered based on givingmore » Type of Processing criteria significantly greater weight, the CsIX/TRUEX alternative follows CsIX in ranking. However, since CsIX/TRUEX shares common uncertainties with CsIX, reasonable backups, which follow in ranking, are the TRUEX and UNEX alternatives. Key uncertainties must be evaluated by the decision-makers to choose one final alternative. Those key uncertainties and a path forward for the technology roadmapping of these alternatives is provided.« less

A screening level risk assessment of the indirect impacts from the Columbus Waste to Energy facility in Columbus, Ohio

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lorber, M.; Cleverly, D.; Schaum, J.

1996-12-31

Testing for emissions of dioxins from the stack of the Columbus, Ohio Waste to Energy (WTE) municipal solid waste combustion facility in 1992 implied that dioxin emissions could approach 1,000 grams of dioxin toxic equivalents (TEQs) per year. The incinerator has been in operation since the early 1980s. Several varying activities to further evaluate or curtail emissions were conducted by local, state and federal agencies in 1994. Also in that year, US EPA`s Region 5 issued an emergency order under Section 7003 of RCRA requiring the facility to install maximum Achievable Control Technology (MACT). As part of their justification formore » this emergency order, Region 5 used a screening level risk assessment of potential indirect impacts. This paper describes this assessment. The exposure setting is a hypothetical dairy farm where individuals on the farm obtain their beef, milk, and vegetables from home sources. A 70-year exposure scenario is considered, which includes 45 years of facility operation at the pre- and post-MACT emission rates, followed by 25 years of impact due to residual soil concentrations. Soil dermal contact, inhalation, and breast milk exposures were also considered for this assessment. The source term, or dioxin loadings to this setting, were derived from air dispersion modeling of emissions from the Columbus WTE. A key finding of the assessment was that exposures to dioxin in beef and milk dominated the estimated risks, with excess cancer risk form these two pathways estimated at 2.8 {times} 10{sup {minus}4}. A second key finding was that over 90% of a lifetime of impact from these two pathways, and the inhalation and vegetable ingestion pathways, has already occurred due to pre-MACT emissions.« less

Matrix assisted autologous chondrocyte transplantation for cartilage treatment

PubMed Central

Kon, E.; Filardo, G.; Di Matteo, B.; Perdisa, F.; Marcacci, M.

2013-01-01

Objectives Matrix-assisted autologous chondrocyte transplantation (MACT) has been developed and applied in the clinical practice in the last decade to overcome most of the disadvantages of the first generation procedures. The purpose of this systematic review is to document and analyse the available literature on the results of MACT in the treatment of chondral and osteochondral lesions of the knee. Methods All studies published in English addressing MACT procedures were identified, including those that fulfilled the following criteria: 1) level I-IV evidence, 2) measures of functional or clinical outcome, 3) outcome related to cartilage lesions of the knee cartilage. Results The literature analysis showed a progressively increasing number of articles per year. A total of 51 articles were selected: three randomised studies, ten comparative studies, 33 case series and five case reports. Several scaffolds have been developed and studied, with good results reported at short to medium follow-up. Conclusions MACT procedures are a therapeutic option for the treatment of chondral lesions that can offer a positive outcome over time for specific patient categories, but high-level studies are lacking. Systematic long-term evaluation of these techniques and randomised controlled trials are necessary to confirm the potential of this treatment approach, especially when comparing against less ambitious traditional treatments. PMID:23610698

76 FR 15371 - Standards of Performance for New Stationary Sources and Emission Guidelines for Existing Sources...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-21

... Mercury Monitoring System LML Lowest Measured Level MACT Maximum Achievable Control Technology Mg/dscm... incinerators incinerators Cd mg/dscm @ 7% O2 0.095 0.0016 CO ppmvd @ 7% O2 3,800 64 HCl ppmvd @ 7% O2 1.2 0.51 Hg mg/dscm @ 7% O2 0.28 0.037 NOX ppmvd @ 7% O2 220 150 Pb mg/dscm @ 7% O2 0.30 0.0074 PCDD/PCDF, TEQ...

Ability to return to sports 5 years after matrix-associated autologous chondrocyte transplantation in an average population of active patients.

PubMed

Zak, Lukas; Aldrian, Silke; Wondrasch, Barbara; Albrecht, Christian; Marlovits, Stefan

2012-12-01

Cartilage injuries often occur during sports activities, and return to sports after cartilage surgery is an important outcome parameter for different treatment methods in the competitive as well as the recreationally active population. At the time of midterm follow-up after matrix-associated autologous chondrocyte transplantation (MACT), return to recreational sports at the preinjury level will be possible. Case series; Level of evidence, 4. Seventy patients (51 men, 19 women; age [mean ± standard deviation], 34.9 ± 8.6 y; range, 18-55 y) were clinically evaluated 5 years after MACT through subjective clinical scores such as the Knee Injury and Osteoarthritis Outcome Score (KOOS) sport and recreation subscales, the Tegner activity scale, and the Noyes sports activity rating scale. The level of sports participation was included in the investigation. The results 5 years after MACT showed mean values of 60.1 for the KOOS-sport, 67.4 for the Noyes, and 3.8 for the Tegner scores, meaning that regular sports activity such as cycling or running on flat ground, as well as medium-level manual labor, is possible. We noted that 74.3% of our patients returned to at least their preinjury sports level. Midterm postoperative results after MACT show that in a moderately active population, participation in regular sports is possible for most patients, at least at their preinjury recreational level and intensity, and there is a good rate of return to sports.

Synthesis, spectroscopic, physicochemical and structural characterization of tetrandrine-based macrocycles functionalized with acridine and anthracene groups: DNA binding and anti-proliferative activity.

PubMed

Calvillo-Páez, Viviana; Sotelo-Mundo, Rogerio R; Leyva-Peralta, Mario; Gálvez-Ruiz, Juan Carlos; Corona-Martínez, David; Moreno-Corral, Ramón; Escobar-Picos, Raymundo; Höpfl, Herbert; Juárez-Sánchez, Octavio; Lara, Karen Ochoa

2018-04-25

In this work, we report on the synthesis of two new mono-alkylated tetrandrine derivatives with acridine and anthracene units, MAcT and MAnT. The compounds were fully characterized by physicochemical techniques and single-crystal X-ray diffraction analysis. In addition, both derivatives were studied as nucleotide receptors and double-stranded DNA binders in aqueous phosphate buffer at pH = 7.2 using UV-vis and fluorescence spectroscopy. According to the molecular recognition studies, MAcT and MAnT exhibit high affinity (K ∼ 10 5  M -1 ) and selectivity for ds-DNA, presumably in an intercalation mode. Finally, the anti-proliferative effects of the tetrandrine derivatives on different cancer cell lines were explored, revealing promising activities. Particularly, the mono-anthracene tetrandrine derivative MAnT showed an IC 50 of 2.74 μg/mL on the HeLa cervical cancer cell line, representing a value 3.3 times smaller than that obtained for unsubstituted tetrandrine. Examination of the cytotoxic effects on the HeLa cell line by inverted microscopy suggests that the cell death mechanism consists basically in apoptosis. The molecular modelling of three ds-DNA-MAcT complexes, suggested that the macrocycles may use an intercalation binding mode towards DNA. MAcT is predicted to bind into the major groove of the ds-DNA providing non-covalent interactions such as electrostatic, van der Waals and hydrophobic interactions that lead to selectivity. Overall experimental data supports the mode of action of MAnT and MAcT as cytotoxic compounds against cancer cell lines via a DNA interaction mechanism. Copyright © 2018 Elsevier B.V. All rights reserved.

Bifunctional role of ephrin A1-Eph system in stimulating cell proliferation and protecting cells from cell death through the attenuation of ER stress and inflammatory responses in bovine mammary epithelial cells.

PubMed

Kang, Minkyung; Jeong, Wooyoung; Bae, Hyocheol; Lim, Whasun; Bazer, Fuller W; Song, Gwonhwa

2018-03-01

Structural and functional development of the mammary gland is constant in the mammary gland life cycle. Eph receptors and their ligands, ephrins, control events through cell-to-cell interactions during embryonic development, and adult tissue homeostasis; however, little information on participation of ephrin A1, a representative ligand of the Eph receptor, in the development and function of normal mammary glands is known. In this study, we demonstrated functional effects of the ephrin A1-Eph system and mechanisms of its action on bovine mammary epithelial (MAC-T) cells. The in vitro cultured MAC-T cells expressed the ephrin A1 ligand and EphA1, A2, A4, A7, and A8 among the eight members of the Eph A family. Our results revealed that ephrin A1 induced MAC-T cell cycle progression and stimulated cell proliferation with abundant expression of nucleic PCNA and cyclin D1 proteins. Additionally, ephrin A1 induced activation of intracellular signaling molecules involved in PI3 K/AKT and MAPK signaling, and the proliferation-stimulating effect of ephrin A1 was mediated by activation of these pathways. Furthermore, ephrin A1 influenced expression and activation of various ER stress-related proteins and protected MAC-T cells from stress-induced cell death. Finally, ephrin A1 alleviated LPS-induced cell death through down-regulation of inflammatory cytokines. In conclusion, the results of this study suggest that the Eph A-ephrin A1 system is a positive factor in the increase and maintenance of epithelial cells in mammary glands of cows; the signaling system contributes to development, remodeling, and functionality of normal mammary glands and could overcome mastitis in cows and other mammals. © 2017 Wiley Periodicals, Inc.

Re: Schering Corporation - MACT Applicability Determination

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Effects of Chinese Propolis in Protecting Bovine Mammary Epithelial Cells against Mastitis Pathogens-Induced Cell Damage.

PubMed

Wang, Kai; Jin, Xiao-Lu; Shen, Xiao-Ge; Sun, Li-Ping; Wu, Li-Ming; Wei, Jiang-Qin; Marcucci, Maria Cristina; Hu, Fu-Liang; Liu, Jian-Xin

2016-01-01

Chinese propolis (CP), an important hive product, can alleviate inflammatory responses. However, little is known regarding the potential of propolis treatment for mastitis control. To investigate the anti-inflammatory effects of CP on bovine mammary epithelial cells (MAC-T), we used a range of pathogens to induce cellular inflammatory damage. Cell viability was determined and expressions of inflammatory/antioxidant genes were measured. Using a cell-based reporter assay system, we evaluated CP and its primary constituents on the NF-κB and Nrf2-ARE transcription activation. MAC-T cells treated with bacterial endotoxin (lipopolysaccharide, LPS), heat-inactivated Escherichia coli, and Staphylococcus aureus exhibited significant decreases in cell viability while TNF-α and lipoteichoic acid (LTA) did not. Pretreatment with CP prevented losses in cell viability associated with the addition of killed bacteria or bacterial endotoxins. There were also corresponding decreases in expressions of proinflammatory IL-6 and TNF-α mRNA. Compared with the mastitis challenged cells, enhanced expressions of antioxidant genes HO-1, Txnrd-1, and GCLM were observed in CP-treated cells. CP and its polyphenolic active components (primarily caffeic acid phenethyl ester and quercetin) had strong inhibitive effects against NF-κB activation and increased the transcriptional activity of Nrf2-ARE. These findings suggest that propolis may be valuable in the control of bovine mastitis.

Effects of Chinese Propolis in Protecting Bovine Mammary Epithelial Cells against Mastitis Pathogens-Induced Cell Damage

PubMed Central

Jin, Xiao-Lu; Shen, Xiao-Ge; Sun, Li-Ping; Wu, Li-Ming; Wei, Jiang-Qin; Marcucci, Maria Cristina; Hu, Fu-Liang; Liu, Jian-Xin

2016-01-01

Chinese propolis (CP), an important hive product, can alleviate inflammatory responses. However, little is known regarding the potential of propolis treatment for mastitis control. To investigate the anti-inflammatory effects of CP on bovine mammary epithelial cells (MAC-T), we used a range of pathogens to induce cellular inflammatory damage. Cell viability was determined and expressions of inflammatory/antioxidant genes were measured. Using a cell-based reporter assay system, we evaluated CP and its primary constituents on the NF-κB and Nrf2-ARE transcription activation. MAC-T cells treated with bacterial endotoxin (lipopolysaccharide, LPS), heat-inactivated Escherichia coli, and Staphylococcus aureus exhibited significant decreases in cell viability while TNF-α and lipoteichoic acid (LTA) did not. Pretreatment with CP prevented losses in cell viability associated with the addition of killed bacteria or bacterial endotoxins. There were also corresponding decreases in expressions of proinflammatory IL-6 and TNF-α mRNA. Compared with the mastitis challenged cells, enhanced expressions of antioxidant genes HO-1, Txnrd-1, and GCLM were observed in CP-treated cells. CP and its polyphenolic active components (primarily caffeic acid phenethyl ester and quercetin) had strong inhibitive effects against NF-κB activation and increased the transcriptional activity of Nrf2-ARE. These findings suggest that propolis may be valuable in the control of bovine mastitis. PMID:27433029

Inspection Checklist for Pharmaceuticals MACT Standard 40 CFR Part 63

EPA Pesticide Factsheets

This checklist is a compliance tool and/or a guidance document to be used by USEPA, State and Local agency inspectors, as well as the pharmaceutical industry, for the purposes of a facility compliance inspection or a self audit.

2005 v4.1 Technical Support Document

EPA Pesticide Factsheets

Preparation of Emission Inventories for the Version 4.1, 2005-based Platform describes how emissions from the 2005 NEI, version 2 and were processed for air quality modeling in support of the Boiler MACT and the Mercury and Air Toxics Standards.

Residual Risk Assessment for the Ferroalloys Source Category in Support of the September Supplemental Proposal

EPA Pesticide Factsheets

This document contains the methods and the results of baseline risk assessments (i.e., after the implementation of the MACT standard) and the results of the post-control scenario risk assessment performed for the ferroalloys source category.

78 FR 50401 - National Advisory Committee on Institutional Quality and Integrity (NACIQI)

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-19

... relationship between (1) accreditation of institutions of higher education and the certification and... Act (FACA) and Section 114(d)(1)(B) of the Higher Education Act (HEA) of 1965, as amended. Meeting... Accreditation Council for Teacher Education (MACTE) (Current and Requested Scope: The accreditation of...

40 CFR 63.5710 - How do I demonstrate compliance using emissions averaging?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Open... section to compute the weighted-average MACT model point value for each open molding resin and gel coat...

Science and policy in regulatory decision making: getting the facts right about hazardous air pollutants.

PubMed Central

Sexton, K

1995-01-01

Hazardous air pollutants are regulated under Title III of the 1990 Clean Air Act Amendments. The Amendments replace the risk-based approach mandated in the 1977 Amendments with a prescriptive, technology-based approach requiring that maximum achievable control technology (MACT) be applied to all major industrial sources of 189 hazardous air pollutants. The change reflects political, rather than scientific consensus that the public health benefits justify the costs. The choice is put into perspective by looking at the interface between science and policy that occurs as part of regular decisionmaking. Particular emphasis is given to examining the interrelationships among facts (science), judgments (science policy), and policy (values) in the context of the risk assessment paradigm. Science and policy are discussed in relation to Title III, contrasting the political consensus for action with the scientific uncertainty about risks and benefits. It is argued that a balanced research program is needed to get the facts right about hazardous air pollutants, including research to meet statutory requirements, to reduce uncertainties in risk assessment, and to address strategic issues. PMID:8549476

Staff Report to the Senior Department Official on Recognition Compliance Issues. Recommendation Page: Montessori Accreditation Council for Teacher Education

ERIC Educational Resources Information Center

US Department of Education, 2010

2010-01-01

The Montessori Accreditation Council for Teacher Education, Commission on Accreditation (MACTE) is a national programmatic and institutional accreditor. The agency currently has 68 freestanding institutions and 13 programs located throughout the United States. The agency's recognition enables its institutions to establish eligibility to receive…

76 FR 42052 - National Emission Standards for Hazardous Air Pollutants From Petroleum Refineries

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... under CAA sections 112(d)(2) and (3) for heat exchange systems, which the EPA had not addressed in the... rule addressed residual risk for all Refinery MACT 1 sources, including heat exchange systems. Third... continue to make improvements in emissions reductions, and the heat exchange system standards will reduce...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2013 CFR

2013-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

40 CFR 264.340 - Applicability.

Code of Federal Regulations, 2012 CFR

2012-07-01

...) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) through (b)(4) of this section... hazardous waste in part 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I... chapter solely because it is reactive (Hazard Code R) for characteristics other than those listed in § 261...

40 CFR 265.340 - Applicability.

Code of Federal Regulations, 2014 CFR

2014-07-01

.... (b) Integration of the MACT standards. (1) Except as provided by paragraphs (b)(2) and (b)(3) of this... 261, subpart D, of this chapter solely because it is ignitable (Hazard Code I), corrosive (Hazard Code... because it is reactive (Hazard Code R) for characteristics other than those listed in § 261.23(a) (4) and...

40 CFR 63.99 - Delegated Federal authorities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... been delegated to the air pollution control agencies in each State under the procedures described in... 26 Pulp & Paper II (Combustion sources) MM X X X 27 Generic MACT: Control Devices SS X X X Eq. Leaks... of 40 CFR Part 63 General Provisions Authorities to State and Local Air Pollution Control Agencies...

Citrus-derived oils inhibit Satphylococcus aureus growth and alter its interaction with bovine mammary cells

USDA-ARS?s Scientific Manuscript database

This experiment examined the effects of cold-pressed, terpeneless citrus oil (CDO) on growth of Staphylococcus aureus, which a major cause of contagious bovine mastitis, and invasion of epithelial cells as modeled with bovine mammary cells (MAC-T). The broth dilution method (Muthaiyan et al., 2012)...

Assessment of yeast Saccharomyces cerevisiae component binding to Mycobacterium avium subspecies paratuberculosis using bovine epithelial cells.

PubMed

Li, Ziwei; You, Qiumei; Ossa, Faisury; Mead, Philip; Quinton, Margaret; Karrow, Niel A

2016-03-01

Since yeast Saccharomyces cerevisiae and its components are being used for the prevention and treatment of enteric diseases in different species, they may also be useful for preventing Johne's disease, a chronic inflammatory bowel disease of ruminants caused by Mycobacterium avium spp. paratuberculosis (MAP). This study aimed to identify potential yeast derivatives that may be used to help prevent MAP infection. The adherence of mCherry-labeled MAP to bovine mammary epithelial cell line (MAC-T cells) and bovine primary epithelial cells (BECs) co-cultured with yeast cell wall components (CWCs) from four different yeast strains (A, B, C and D) and two forms of dead yeast from strain A was investigated. The CWCs from all four yeast strains and the other two forms of dead yeast from strain A reduced MAP adhesion to MAC-T cells and BECs in a concentration-dependent manner after 6-h of exposure, with the dead yeast having the greatest effect. The following in vitro binding studies suggest that dead yeast and its' CWCs may be useful for reducing risk of MAP infection.

Effect of CLA and other C18 unsaturated fatty acids on DGAT in bovine milk fat biosynthetic systems.

PubMed

Sørensen, Brent M; Chris Kazala, E; Murdoch, Gordon K; Keating, Aileen F; Cruz-Hernandez, Cristina; Wegner, Jochen; Kennelly, John J; Okine, Erasmus K; Weselake, Randall J

2008-10-01

Production of dairy products with increased amounts of nutraceutic FA such as conjugated linoleic acid (CLA) represents a recent approach for dairy producers and processors to increase the value of their products. The effect of CLA and other FA on the expression of diacylglycerol acyltransferase-1 (DGAT-1) and DGAT-2, and DGAT activity were investigated in bovine mammary gland epithelial (MAC-T) cells. DGAT gene expression analyses were also conducted using bovine mammary gland tissue from dairy cows. In the studies with MAC-T cells, there were no significant effects of CLA isomers or other FA on DGAT1 expression, whereas all FA tested showed enhanced DGAT2 expression (P < 0.05 to P < 0.001), with alpha-linolenic acid (alpha-18:3) having the greatest effect. Additionally, DGAT2 expression was co-ordinated with expression of lysophosphatidic acid acyltransferase (LPAAT), an observation that was also apparent in mammary gland from lactating dairy cows. In contrast, treatment of MAC-T cells with trans-10, cis-12 18:2 or alpha-18:3 resulted in a significant (P < 0.05) decrease in overall DGAT enzyme activity, although the mechanisms resulting in these effects are unclear. Competition assays using microsomes from bovine mammary gland tissue and 1-[(14)C]oleoyl-CoA suggested that DGAT activity was more selective for oleoyl (cis-9 18:1)-CoA than cis-9, trans-11 18:2-, trans-10, cis-12 18:2- or cis-9, cis-12 18:2-CoA. Collectively, the results suggest the relationship between trans-10, cis-12 18:2 and reduced TAG production in bovine milk is not linked to the production of DGAT1 or DGAT2 transcripts, but probably involves effects of this CLA isomer at events beyond transcription, such as post-translational and/or enzyme activity effects.

The effect of musical attention control training (MACT) on attention skills of adolescents with neurodevelopmental delays: a pilot study.

PubMed

Pasiali, Varvara; LaGasse, A Blythe; Penn, Saundra L

2014-01-01

Given the effect of musical training on the rate and accuracy of processing auditory information, therapeutic uses of music may potentially have remedial benefits for individuals with neurodevelopmental deficits. However, additional studies are needed to establish efficacy of music therapy interventions for attention skills in children/adolescents with neurodevelopmental disabilities including those with Autism Spectrum Disorders (ASD). To establish feasibility and preliminary efficacy of a group music therapy protocol to improve attention skills (sustained, selective, attentional control/switching) in adolescents diagnosed with autism and/or developmental delays. This single group pretest/posttest study took place in a private school for high functioning adolescents with neurodevelopmental delays. Nine students (4 males, 5 females), ages 13 to 20, participated in the study. Autism severity was assessed using the CARS2-HF and indicated the following distribution for study participants: severe (n = 3), mild (n = 4), or minimal/no (n = 2) symptoms. We assessed feasibility of implementing a 45-min Musical Attention Control Training (MACT) intervention delivered by a board-certified music therapist eight times over 6 weeks in a school setting. We also examined preliminary efficacy of the MACT to improve attention skills using the Test of Everyday Attention for Children (TEA-Ch). Parental consent rate was 100%. All nine participants successfully completed testing measures and 6 weeks of the intervention. Average participation rate was 97%. Data analysis showed positive trends and improvements on measures of attentional control/switching and selective attention. The results showed that the intervention and testing measures were feasible to implement and acceptable to the participants who all completed the protocol. Data analysis demonstrated positive trends indicating that more research on the use of music therapy attention training in high-functioning adolescents with neurodevelopmental disabilities is warranted. © the American Music Therapy Association 2014. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

75 FR 65067 - National Emission Standards for Hazardous Air Pollutant Emissions: Hard and Decorative Chromium...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-21

... non-air quality health and environmental impacts) and are commonly referred to as maximum achievable... process, stack, storage, or fugitive emissions point, (D) are design, equipment, work practice, or... combination of the above. CAA section 112(d)(2)(A)-(E). The MACT standard may take the form of a design...

National Emission Standards for Hazardous Air Pollutants (NESHAP) for Major Sources: Industrial, Commercial, and Institutional Boilers - Guidance for Calculating Emission Credits Resulting from Implementation of Energy Conservation Measures

EPA Pesticide Factsheets

The purpose of this July 2012 document is to provide guidance for developing a consistent approach to documenting efficiency credits generated from energy conservation measures in the Implementation Plan for boilers covered by the Boiler MACT rule.

40 CFR 63.99 - Delegated Federal authorities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... delegated to the air pollution control agencies in each State under the procedures described in this subpart... (Combustion sources) MM X X X 27 Generic MACT: Control Devices SS X X X Eq. Leaks—Level 1 TT X X X Eq. Leaks... of 40 CFR Part 63 General Provisions Authorities to State and Local Air Pollution Control Agencies...

40 CFR 63.99 - Delegated Federal authorities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... lists the specific source categories that have been delegated to the air pollution control agencies in... Generic MACT: Control Devices SS X X X Eq. Leaks—Level 1 TT X X X Eq. Leaks—Level 2 UU X X X Tanks—Level 2... General Provisions Authorities to State and Local Air Pollution Control Agencies.” 2 Alaska received...

40 CFR 63.99 - Delegated Federal authorities.

Code of Federal Regulations, 2013 CFR

2013-07-01

... lists the specific source categories that have been delegated to the air pollution control agencies in... Generic MACT: Control Devices SS X X X Eq. Leaks—Level 1 TT X X X Eq. Leaks—Level 2 UU X X X Tanks—Level 2... General Provisions Authorities to State and Local Air Pollution Control Agencies.” 2 Alaska received...

40 CFR 63.99 - Delegated Federal authorities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... (stage 1) R X 9 Pulp & Paper I S X 10 Halogenated Solvent Cleaning T X 11 Polymer & Resins 1 U X 12... Sterilization O X 7 Chromium Cooling Towers Q X 8 Gasoline Distribution (stage 1) R X 9 Pulp & Paper I S X 10... R Gasoline Distribution X S Pulp & Paper MACT I X T Halogenated Solvent X U Polymers & Resins/Group...

Clinical and Radiological Regeneration of Large and Deep Osteochondral Defects of the Knee by Bone Augmentation Combined With Matrix-Guided Autologous Chondrocyte Transplantation.

PubMed

Zellner, Johannes; Grechenig, Stephan; Pfeifer, Christian G; Krutsch, Werner; Koch, Matthias; Welsch, Goetz; Scherl, Madeleine; Seitz, Johannes; Zeman, Florian; Nerlich, Michael; Angele, Peter

2017-11-01

Large osteochondral defects of the knee are a challenge for regenerative treatment. While matrix-guided autologous chondrocyte transplantation (MACT) represents a successful treatment for chondral defects, the treatment potential in combination with bone grafting by cancellous bone or bone block augmentation for large and deep osteochondral defects has not been evaluated. To evaluate 1- to 3-year clinical outcomes and radiological results on magnetic resonance imaging (MRI) after the treatment of large osteochondral defects of the knee with bone augmentation and MACT. Special emphasis is placed on different methods of bone grafting (cancellous bone grafting or bone block augmentation). Case series; Level of evidence, 4. Fifty-one patients were included. Five patients were lost to follow-up. This left 46 patients (mean age, 28.2 years) with a median follow-up time of 2 years. The 46 patients had 47 deep, large osteochondral defects of the knee joint (1 patient with bilateral defects; mean defect size, 6.7 cm 2 ). The origin of the osteochondral defects was osteochondritis dissecans (n = 34), osteonecrosis (n = 8), or subchondral cysts (n = 5). Depending on the depth, all defects were treated by cancellous bone grafting (defect depth ≤10 mm; n = 16) or bone block augmentation (defect depth >10 mm; n = 31) combined with MACT. Clinical outcomes were followed at 3 months, 6 months, 1 year, 2 years, and 3 years and evaluated using the International Knee Documentation Committee (IKDC) score and Cincinnati score. A magnetic resonance imaging (MRI) evaluation was performed at 1 and 2 years, and the magnetic resonance observation of cartilage repair tissue (MOCART) score with additional specific subchondral bone parameters (bone regeneration, bone signal quality, osteophytes, sclerotic areas, and edema) was analyzed. The clinical outcome scores revealed a significant increase at follow-up (6 months to 3 years) compared with the preclinical results. The median IKDC score increased from 42.6 preoperatively to 75.3 at 1 year, 79.7 at 2 years, and 84.3 at 3 years. The median Cincinnati score significantly increased from 39.8 preoperatively to 72.0 at 1 year, 78.0 at 2 years, and 80.3 at 3 years. The MRI evaluation revealed a MOCART score of 82.6 at 1 year without a deterioration at the later follow-up time point. Especially, the subchondral bone analysis showed successful regeneration. All bone blocks and cancellous bone grafts were integrated in the bony defects, and no chondrocyte transplant failure could be detected throughout the follow-up. Large and deep osteochondral defects of the knee joint can be treated successfully with bone augmentation and MACT. The treatment of shallow bony defects with cancellous bone grafting and deep bony defects with bone block augmentation shows promising results.

75 FR 19252 - Delegation of New Source Performance Standards and National Emission Standards for Hazardous Air...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-14

... Industrial Process Cooling X Towers. R Gasoline Distribution X S Pulp & Paper MACT I X T Halogenated Solvent.... IIII Auto & Light Duty Truck (Surface X Coating). JJJJ Paper & Other Webs (Surface X Coating). KKKK... subparts B, H, I, K, Q, R, T, and W. For the part 63 NESHAPs, this includes the NESHAPs set forth in the...

Matrix-associated implantation of predifferentiated mesenchymal stem cells versus articular chondrocytes: in vivo results of cartilage repair after 1 year.

PubMed

Marquass, Bastian; Schulz, Ronny; Hepp, Pierre; Zscharnack, Matthias; Aigner, Thomas; Schmidt, Stefanie; Stein, Frank; Richter, Robert; Osterhoff, Georg; Aust, Gabriele; Josten, Christoph; Bader, Augustinus

2011-07-01

The use of predifferentiated mesenchymal stem cells (MSC) leads to better histological results compared with undifferentiated MSC in sheep. This raises the need for a longer term follow-up study and comparison with a clinically established method. We hypothesized that chondrogenic in vitro predifferentiation of autologous MSC embedded in a collagen I hydrogel leads to better structural repair of a chronic osteochondral defect in an ovine stifle joint after 1 year. We further hypothesized that resulting histological results would be comparable with those of chondrocyte-seeded matrix-associated autologous chondrocyte transplantation (MACT). Controlled laboratory study. Predifferentiation period of ovine MSC within collagen gel in vitro was defined by assessment of several cellular and molecular biological parameters. For the animal study, 2 osteochondral lesions (7-mm diameter) were created at the medial femoral condyles of the hind legs in 9 sheep. Implantation of MSC gels was performed 6 weeks after defect creation. Thirty-six defects were divided into 4 treatment groups: (1) chondrogenically predifferentiated MSC gels (pre-MSC gels), (2) undifferentiated MSC gels (un-MSC gels), (3) MACT gels, and (4) untreated controls (UC). Histological, immunohistochemical, and radiological evaluations followed after 12 months. After 12 months in vivo, pre-MSC gels showed significantly better histological outcome compared with un-MSC gels and UC. Compared with MACT gels, the overall scores were higher for O'Driscoll and International Cartilage Repair Society (ICRS). The repair tissue of the pre-MSC group showed immunohistochemical detection of interzonal collagen type II staining. Radiological evaluation supported superior bonding of pre-MSC gels to perilesional native cartilage. Compared with previous work by our group, no degradation of the repair tissue between 6 and 12 months in vivo, particularly in pre-MSC gels, was observed. Repair of chronic osteochondral defects with collagen hydrogels composed of chondrogenically predifferentiated MSC shows no signs of degradation after 1 year in vivo. In addition, pre-MSC gels lead to partially superior histological results compared with articular chondrocytes. The results suggest an encouraging method for future treatment of focal osteochondral defects without donor site morbidity by harvesting articular chondrocytes.

Carbon bed mercury emissions control for mixed waste treatment.

PubMed

Soelberg, Nick; Enneking, Joe

2010-11-01

Mercury has various uses in nuclear fuel reprocessing and other nuclear processes, and so it is often present in radioactive and mixed (radioactive and hazardous) wastes. Compliance with air emission regulations such as the Hazardous Waste Combustor (HWC) Maximum Achievable Control Technology (MACT) standards can require off-gas mercury removal efficiencies up to 99.999% for thermally treating some mixed waste streams. Test programs have demonstrated this level of off-gas mercury control using fixed beds of granular sulfur-impregnated activated carbon. Other results of these tests include (1) the depth of the mercury control mass transfer zone was less than 15-30 cm for the operating conditions of these tests; (2) MERSORB carbon can sorb mercury up to 19 wt % of the carbon mass; and (3) the spent carbon retained almost all (98.3-99.99%) of the mercury during Toxicity Characteristic Leachability Procedure (TCLP) tests, but when even a small fraction of the total mercury dissolves, the spent carbon can fail the TCLP test when the spent carbon contains high mercury concentrations.

78 FR 20246 - Delegation of National Emission Standards for Hazardous Air Pollutants for the States of Kentucky...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-04

... Gasoline R X X Distribution (stage 1). 9 Pulp & Paper I. S X X 10 Halogenated T X X Solvent Cleaning. 11... Fiberglass. 56 Auto & Light IIII X X Duty Truck (coating). 57 Paper & Other JJJJ X X Webs. 58 Metal Can KKKK... & Paper MACT I X T Halogenated Solvent X U Polymers & Resins/Group I...... X W Epoxy Resins and Non-Nylon...

40 CFR Table 3 to Subpart Vvvv of... - MACT Model Point Value Formulas for Open Molding Operations 1

Code of Federal Regulations, 2010 CFR

2010-07-01

..., tooling resin a. Atomized 0.014 × (Resin HAP%)2.425 b. Atomized, plus vacuum bagging with roll-out 0.01185 × (Resin HAP%)2.425 c. Atomized, plus vacuum bagging without roll-out 0.00945 × (Resin HAP%)2.425 d. Nonatomized 0.014 × (Resin HAP%)2.275 e. Nonatomized, plus vaccum bagging with roll-out 0.0110 × (Resin HAP%)2...

Biofilter application for control of BTEX compounds from glycol dehydrator condenser vent gases at oil and natural gas producing facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stewart, W.C.; Kamarthi, R.S.

1997-12-31

Compliance with 1990 Clean Air Act Amendments will require cost-effective control technologies to reduce air emissions for petroleum industries. EPA has also proposed a new MACT Rule for Oil and Natural Gas Producing Facilities which will require control of emissions from glycol dehydrator vents. Control of volatile organic compound (VOC) emissions such as benzene, toluene, ethylbenzene, and xylene (BTEX) is one of the major concerns for the petroleum industries. Traditional VOC control methods may not be economically feasible to meet the requirements of these regulations. Recent studies have shown that biofilters can cost-effectively remove BTEX compounds with greater than 95%more » efficiency. This paper describes results from field testing a biofilter at an Oil and Natural Gas Producing facility. The biofilter treats a low flow gas stream containing high concentrations of VOCs and carbon dioxide from a glycol dehydrator condenser vent. A modular high-rate vapor phase biofilter developed by BioiReaction Industries was used to investigate the feasibility of this low-cost technology. Due to the high VOC loading (BTEX compounds up to 18,000 ppm; total VOCs 50,000 to 90,000 ppm), three modular biofilters were installed in series.« less

Antibacterial Activity of 7-Epiclusianone and Its Novel Copper Metal Complex on Streptococcus spp. Isolated from Bovine Mastitis and Their Cytotoxicity in MAC-T Cells.

PubMed

de Barros, Mariana; Perciano, Pedro Griffo; Dos Santos, Marcelo Henrique; De Oliveira, Leandro Licursi; Costa, Éderson D'Martin; Moreira, Maria Aparecida Scatamburlo

2017-05-17

Mastitis is an inflammation of mammary gland parenchyma that adversely affects bovine health and dairy production worldwide despite significant efforts to eradicate it. The aim of this work was to characterize the antimicrobial activity of 7-epiclusianone (7-epi), a compound extracted from the Rheedia brasiliensis fruit, its complex with copper against Streptococcus spp. isolated from bovine mastitis, and to assess their cytotoxicity to bovine mammary alveolar cells (MAC-T). The complex 7-epiclusianone-Cu (7-epi-Cu) was an amorphous green solid with optical activity. Its vibrational spectrum in the infrared region showed absorption bands in the high-frequency region, as well as bands that can be attributed to the unconjugated and conjugated stretching of the free ligand. The complex was anhydrous. One of the tested bacterial strains was not sensitive to the compounds, while the other three had MIC values of 7.8 µg mL -1 and minimum bactericidal concentration (MBC) values between 15.6 and 31.3 µg mL -1 . These two compounds are bacteriostatic, did not cause damage to the cell wall and, at sub-inhibitory concentrations, did not induce bacterial adhesion. The compounds were not cytotoxic. Based on these results, 7-epi and 7-epi-Cu exhibited desirable antimicrobial properties and could potentially be used in bovine mastitis treatment.

In vivo evaluation of biomechanical properties in the patellofemoral joint after matrix-associated autologous chondrocyte transplantation by means of quantitative T2 MRI.

PubMed

Pachowsky, M L; Trattnig, S; Wondrasch, B; Apprich, S; Marlovits, S; Mauerer, A; Welsch, Goetz H; Blanke, M

2014-06-01

To determine in vivo biomechanical properties of articular cartilage and cartilage repair tissue of the patella, using biochemical MRI by means of quantitative T2 mapping. Twenty MR scans were achieved at 3T MRI, using a new 8-channel multi-function coil allowing controlled bending of the knee. Multi-echo spin-echo T2 mapping was prepared in healthy volunteers and in age- and sex-matched patients after matrix-associated autologous chondrocyte transplantation (MACT) of the patella. MRI was performed at 0° and 45° of flexion of the knee after 0 min and after 1 h. A semi-automatic region-of-interest analysis was performed for the whole patella cartilage. To allow stratification with regard to the anatomical (collagen) structure, further subregional analysis was carried out (deep-middle-superficial cartilage layer). Statistical analysis of variance was performed. During 0° flexion (decompression), full-thickness T2 values showed no significant difference between volunteers (43 ms) and patients (41 ms). Stratification was more pronounced for healthy cartilage compared to cartilage repair tissue. During 45° flexion (compression), full-thickness T2 values within volunteers were significantly increased (54 ms) compared to patients (44 ms) (p < 0.001). Again, stratification was more pronounced in volunteers compared to patients. The volunteer group showed no significant increase in T2 values measured in straight position and in bended position. There was no significant difference between the 0- and the 60-min MRI examination. T2 values in the patient group increased between the 0- and the 60-min examination. However, the increase was only significant in the superior cartilage layer of the straight position (p = 0.021). During compression (at 45° flexion), healthy patellar cartilage showed a significant increase in T2-values, indicating adaptations of water content and collagen fibril orientation to mechanical load. This could not be observed within the patella cartilage after cartilage repair (MACT) of the patella, most obvious due to a lack of biomechanical adjustment. III.

Mercury control in 2009

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjostrom, S.; Durham, M.; Bustard, J.

2009-07-15

Although activated carbon injection (ACI) has been proven to be effective for many configurations and is a preferred option at many plants sufficient quantities of powdered activated coking (PAC) must be available to meet future needs. The authors estimate that upcoming federal and state regulations will result in tripling the annual US demand for activated carbon to nearly 1.5 billion lb from approximately 450 million lb. Rapid expansion of US production capacity is required. Many PAC manufacturers are discussing expansion of their existing production capabilities. One company, ADA Carbon Solutions, is in the process of constructing the largest activated carbonmore » facility in North America to meet the future demand for PAC as a sorbent for mercury control. Emission control technology development and commercialization is driven by regulation and legislation. Although ACI will not achieve > 90% mercury control at every plant, the expected required MACT legislation level, it offers promise as a low-cost primary mercury control technology option for many configurations and an important trim technology for others. ACI has emerged as the clear mercury-specific control option of choice, representing over 98% of the commercial mercury control system orders to date. As state regulations are implemented and the potential for a federal rule becomes more imminent, suppliers are continuing to develop technologies to improve the cost effectiveness and limit the balance of plant impacts associated with ACI and are developing additional PAC production capabilities to ensure that the industry's needs are met. The commercialisation of ACI is a clear example of industry, through the dedication of many individuals and companies with support from the DOE and EPRI, meeting the challenge of developing cost-effectively reducing emissions from coal-fired power plants. 7 refs., 1 fig.« less

General Shale Brick, Inc. and Interaction between MACT, PSD, and Major Nonattainment Review

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Clarification of Statement of a Memorandum Entitled Crediting of MACT Emission Reductions for NSR Netting and Offsets

EPA Pesticide Factsheets

This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

The toxic release inventory: fact or fiction? A case study of the primary aluminum industry.

PubMed

Koehler, Dinah A; Spengler, John D

2007-10-01

Since 1989 manufacturing facilities across the USA must report toxic chemical emissions to the EPA's toxic release inventory (TRI). Public release of this information and increased public scrutiny are believed to significantly contribute to the over 45% reduction in toxic chemical releases since inception of the program and to growing support for this type of informational regulation instead of traditional command-and-control. However, prior research indicates a tendency to under-report emissions. We find specific evidence of under-reporting of polycyclic aromatic hydrocarbons (PAH) to the TRI by primary aluminum facilities after promulgation of the industry's maximum available control technology (MACT) standard in 1997. We also find evidence of dislocation of emission overseas due to these regulatory requirements. Additionally, changes in energy prices affected aluminum production and further distort reported PAH emissions levels. This suggests the possibility of more widespread under-reporting that is modulated by various factors, including market conditions and new regulations, and which may partially explain the downward trend in TRI emissions. It also suggests that the quality of TRI data may improve once facilities are subject to monitoring of emissions of a TRI listed pollutant due to command-and-control regulation.

Parallel representation of stimulus identity and intensity in a dual pathway model inspired by the olfactory system of the honeybee.

PubMed

Schmuker, Michael; Yamagata, Nobuhiro; Nawrot, Martin Paul; Menzel, Randolf

2011-01-01

The honeybee Apis mellifera has a remarkable ability to detect and locate food sources during foraging, and to associate odor cues with food rewards. In the honeybee's olfactory system, sensory input is first processed in the antennal lobe (AL) network. Uniglomerular projection neurons (PNs) convey the sensory code from the AL to higher brain regions via two parallel but anatomically distinct pathways, the lateral and the medial antenno-cerebral tract (l- and m-ACT). Neurons innervating either tract show characteristic differences in odor selectivity, concentration dependence, and representation of mixtures. It is still unknown how this differential stimulus representation is achieved within the AL network. In this contribution, we use a computational network model to demonstrate that the experimentally observed features of odor coding in PNs can be reproduced by varying lateral inhibition and gain control in an otherwise unchanged AL network. We show that odor coding in the l-ACT supports detection and accurate identification of weak odor traces at the expense of concentration sensitivity, while odor coding in the m-ACT provides the basis for the computation and following of concentration gradients but provides weaker discrimination power. Both coding strategies are mutually exclusive, which creates a tradeoff between detection accuracy and sensitivity. The development of two parallel systems may thus reflect an evolutionary solution to this problem that enables honeybees to achieve both tasks during bee foraging in their natural environment, and which could inspire the development of artificial chemosensory devices for odor-guided navigation in robots.

High Intensity Interval Training Leads to Greater Improvements in Acute Heart Rate Recovery and Anaerobic Power as High Volume Low Intensity Training.

PubMed

Stöggl, Thomas L; Björklund, Glenn

2017-01-01

The purpose of the current study was to explore if training regimes utilizing diverse training intensity distributions result in different responses on neuromuscular status, anaerobic capacity/power and acute heart rate recovery (HRR) in well-trained endurance athletes. Methods: Thirty-six male ( n = 33) and female ( n = 3) runners, cyclists, triathletes and cross-country skiers [peak oxygen uptake: (VO 2peak ): 61.9 ± 8.0 mL·kg -1 ·min -1 ] were randomly assigned to one of three groups (blocked high intensity interval training HIIT; polarized training POL; high volume low intensity oriented control group CG/HVLIT applying no HIIT). A maximal anaerobic running/cycling test (MART/MACT) was performed prior to and following a 9-week training period. Results: Only the HIIT group achieved improvements in peak power/velocity (+6.4%, P < 0.001) and peak lactate ( P = 0.001) during the MART/MACT, while, unexpectedly, in none of the groups the performance at the established lactate concentrations (4, 6, 10 mmol·L -1 ) was changed ( P > 0.05). Acute HRR was improved in HIIT (11.2%, P = 0.002) and POL (7.9%, P = 0.023) with no change in the HVLIT oriented control group. Conclusion: Only a training regime that includes a significant amount of HIIT improves the neuromuscular status, anaerobic power and the acute HRR in well-trained endurance athletes. A training regime that followed more a low and moderate intensity oriented model (CG/HVLIT) had no effect on any performance or HRR outcomes.

High Intensity Interval Training Leads to Greater Improvements in Acute Heart Rate Recovery and Anaerobic Power as High Volume Low Intensity Training

PubMed Central

Stöggl, Thomas L.; Björklund, Glenn

2017-01-01

The purpose of the current study was to explore if training regimes utilizing diverse training intensity distributions result in different responses on neuromuscular status, anaerobic capacity/power and acute heart rate recovery (HRR) in well-trained endurance athletes. Methods: Thirty-six male (n = 33) and female (n = 3) runners, cyclists, triathletes and cross-country skiers [peak oxygen uptake: (VO2peak): 61.9 ± 8.0 mL·kg−1·min−1] were randomly assigned to one of three groups (blocked high intensity interval training HIIT; polarized training POL; high volume low intensity oriented control group CG/HVLIT applying no HIIT). A maximal anaerobic running/cycling test (MART/MACT) was performed prior to and following a 9-week training period. Results: Only the HIIT group achieved improvements in peak power/velocity (+6.4%, P < 0.001) and peak lactate (P = 0.001) during the MART/MACT, while, unexpectedly, in none of the groups the performance at the established lactate concentrations (4, 6, 10 mmol·L−1) was changed (P > 0.05). Acute HRR was improved in HIIT (11.2%, P = 0.002) and POL (7.9%, P = 0.023) with no change in the HVLIT oriented control group. Conclusion: Only a training regime that includes a significant amount of HIIT improves the neuromuscular status, anaerobic power and the acute HRR in well-trained endurance athletes. A training regime that followed more a low and moderate intensity oriented model (CG/HVLIT) had no effect on any performance or HRR outcomes. PMID:28824457

Effect of addition of coconut water (Cocos nucifera) to the freezing media on post-thaw viability of boar sperm.

PubMed

Bottini-Luzardo, María; Centurión-Castro, Fernando; Alfaro-Gamboa, Militza; Aké-López, Ricardo; Herrera-Camacho, José

2013-01-01

The aims of this experiment were to evaluate the addition of coconut water in natura to the freezing media, compare the effect of deionized water vs filtered water of coconut over the post-thaw seminal characteristics, and evaluate the effect of the deionized water and in natura coconut water on the seminal characteristics of boar sperm at different post-thaw times. Thirty-four ejaculates were used divided in three aliquots which received one of the following treatments (T): T1, LEY (bidistilled water, lactose, and egg yolk) and LEYGO (LEY + glycerol and Orvus ET paste); T2, LEY(A) (coconut deionized water, lactose, and egg yolk)-LEYGO(A); and T3, LEY(B) (in natura coconut water, lactose, and egg yolk)-LEYGO(B). Samples of boar semen were frozen according to the Westendorf method, thawed at 38°C, and evaluated at three incubation times (0, 30, and 60 min). Seminal characteristics assessed were motility (Mot), acrosomal integrity (AInt), membrane integrity (MInt), and mitochondrial activity (MAct). T1 showed a higher percentage of viable sperm than T3 (Mot 36.5 vs 5.4 %, AInt 61.8 vs 41.2 %, MInt 50.4 vs 41.3 %, and MAct 56.9 vs 50.5 %). T2 kept a higher percentage of viable sperm at all incubation times. In natura coconut water showed a detrimental effect over the viability of the frozen-thawed boar semen. Deionized coconut water improved the boar semen viability post-thaw, outperforming results of in natura coconut water.

Development of an Advanced Fan Blade Containment System

DTIC Science & Technology

1989-08-01

TFE731 -2 4500 28.2 30 CFM56-2 24000 70.5 44 PW2037 38250 78.5 36 JT9D-7 45600 93.4 46 CF6-6D 45750 86.4 38 RB211-524D4 53000 86.3 33 JT9D-7R4G 54750 94.9...THRUST MODEL (LB) TIP IMPACT BAEIMPACT I MACT F109 1,330 3.172 2.158 0.854 TFE731 -5 4,500 4.455 3.019 0.983 CFM56-2 24,000 10.900 7.398 1.864 FIGURE 7

Functional Analysis of luxS in Staphylococcus aureus Reveals a Role in Metabolism but Not Quorum Sensing

PubMed Central

Doherty, Neil; Holden, Matthew T. G.; Qazi, Saara N.; Williams, Paul; Winzer, Klaus

2006-01-01

The function of AI-2 in many bacteria and the physiological role of LuxS, the enzyme responsible for its production, remain matters of debate. Here, we show that in Staphylococcus aureus the luxS gene forms a monocistronic transcriptional unit under the control of a σ70-dependent promoter. The gene was transcribed throughout growth under a variety of conditions, including intracellular growth in MAC-T cells. AI-2 was produced in rich media under aerobic and anaerobic conditions, peaking during the transition to stationary phase, but was hardly detectable in a sulfur-limited defined medium. In the presence of glucose or under anaerobic conditions, cultures retained considerable AI-2 activity after entry into stationary phase. Inactivation of luxS in various S. aureus strains did not affect virulence-associated traits, such as production of hemolysins and extracellular proteases, biofilm formation, and the agr signaling system. Conversely, AI-2 production remained unchanged in an agr mutant. However, luxS mutants grown in a sulfur-limited defined medium exhibited a growth defect. When grown together with the wild type in mixed culture, luxS mutants of various S. aureus strains showed reduced ability to compete for growth under these conditions. In contrast, a complemented luxS mutant grew as well as the parent strain, suggesting that the observed growth defect was of an intracellular nature and had not been caused by either second-site mutations or the lack of a diffusible factor. However, the LuxS/AI-2 system does not appear to contribute to the overall fitness of S. aureus RN6390B during intracellular growth in epithelial cells: the wild type and a luxS mutant showed very similar growth patterns after their internalization by MAC-T cells. PMID:16585750

Bactericidal and Anti-biofilm Effects of Polyhexamethylene Biguanide in Models of Intracellular and Biofilm of Staphylococcus aureus Isolated from Bovine Mastitis

PubMed Central

Kamaruzzaman, Nor F.; Chong, Stacy Q. Y.; Edmondson-Brown, Kamina M.; Ntow-Boahene, Winnie; Bardiau, Marjorie; Good, Liam

2017-01-01

Staphylococcus aureus infection is a common cause of mastitis, reducing milk yield, affecting animal welfare and causing huge economic losses within the dairy industry. In addition to the problem of acquired drug resistance, bacterial invasion into udder cells and the formation of surface biofilms are believed to reduce antibiotic efficacy, leading to treatment failure. Here, we investigated the antimicrobial activities of enrofloxacin, an antibiotic that is commonly used in mastitis therapy and polyhexamethylene biguanide (PHMB), an antimicrobial polymer. The antimicrobial activities were tested against intracellular S. aureus in infected Mac-T cells (host cells). Also, fluorescein-tagged PHMB was used to study PHMB uptake and localization with S. aureus within the infected Mac-T cells. Anti-biofilm activities were tested by treating S. aureus biofilms and measuring effects on biofilm mass in vitro. Enrofloxacin and PHMB at 15 mg/L killed between 42 to 92 and 99.9% of intracellular S. aureus, respectively. PHMB-FITC entered and colocalized with the intracellular S. aureus, suggesting direct interaction of the drug with the bacteria inside the host cells. Enrofloxacin and PHMB at 15 mg/L reduced between 10 to 27% and 28 to 37% of biofilms’ mass, respectively. The half-maximal inhibitory concentrations (IC50) obtained from a cytotoxicity assay were 345 ± 91 and 21 ± 2 mg/L for enrofloxacin and PHMB, respectively; therefore, both compounds were tolerated by the host cells at high concentrations. These findings suggest that both antimicrobials are effective against intracellular S. aureus and can disrupt biofilm structures, with PHMB being more potent against intracellular S. aureus, highlighting the potential application of PHMB in mastitis therapy. PMID:28848527

Applicability of the May 16, 1995 Memorandum Potential to Emit for MACT Standards - Guidance on Timing Issues for Subpart T Sources Who Become Non-major after the Compliance Date of the Standard

EPA Pesticide Factsheets

This document may be of assistance in applying the Title V air operating permit regulations. This document is part of the Title V Policy and Guidance Database available at www2.epa.gov/title-v-operating-permits/title-v-operating-permit-policy-and-guidance-document-index. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

Field testing results for the R-BTEX{sup {trademark}} process for controlling glycol dehydrator emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamez, J.P.; Rueter, C.O.; Beitler, C.M.

1995-12-01

lncreasing regulatory pressure has made emissions of benzene, toluene, ethylbenzene, and xylenes (collectively known as BTEX) and total volatile organic compounds (VOC) from glycol dehydration units a major concern for the natural gas industry since there are over 40,000 of these units in operation. The Clean Air Act Amendments (CAAA) of 1990 have been the impetus for air toxics regulations, and the Maximum Achievable Control Technology (MACT) standards for the oil and gas industry will be proposed in June, 1995, and will include glycol dehydrators. In addition, several states are regulating or considering regulation of these units. The most commonmore » control systems that have been applied to glycol dehydrators are combustion or condensation systems. Combustion systems suffer from high operating costs since they do not recover the hydrocarbon for sale and require supplemental fuel. Many of the condensation systems may not achieve sufficiently low condenser temperatures to meet regulatory control limits. The R-BTEX{sup TM} process addresses this shortcoming by recovering the steam from the glycol dehydrator and converting it to cooling water; this allows R-BTEX to achieve the lowest condenser temperature possible without refrigeration. The Gas Research Institute (GRI) is conducting a field test program to demonstrate the process under a variety of conditions. Under this program, testing has been completed at one site in south Texas and at another site in western Colorado. Startup of a third unit at a Gulf Coast site in Texas should occur in late 1994. This paper presents the testing results for the first two sites and includes a side-by-side comparison of the R-BTEX process with other available control technologies.« less

Clean Air Act, TRI drive emission reduction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heller, K.

1994-06-22

When asked to rank priority environmental engineering projects, many chemical firms put emissions reduction first. The chief motivators are the need to comply with rules governing major sources of hazardous air pollutants (HAPS) under the Clean Air Act Amendments of 1990 (CAA), along with the need to reduce the volumes of chemicals on EPA`s Toxics Release Inventory (TRI). Deep-welling of toxics is getting special attention as the practice adds considerably to TRI numbers. {open_quotes}We want to eliminate our air toxics so that we can get entirely out of the [CAA] Maximum Achievable Control Technology (MACT) requirements,{close_quotes} says Thomas Zosel, manager/pollutionmore » prevention programs for 3M (St. Paul, MN). He estimates that 3M`s 1993 total research expenditures for environmental improvements were at least $200 million, out of an annual research budget of a little more than $1 billion. And, he says, the spending level is not expected to drop. Among its many efforts, 3M is striving to move away from solvents in all of its processes. To help reach that goal, the company developed a {open_quotes}waste measurement metric{close_quotes} that calculates the wastes produced by each of the company`s 50 operating divisions. In the case of Magic Tape, the company eliminated solvent emission by switching to a water-based adhesive that does not require a solvent.« less

The Metal Abundances across Cosmic Time (MACT) Survey. I. Optical Spectroscopy in the Subaru Deep Field

NASA Astrophysics Data System (ADS)

Ly, Chun; Malhotra, Sangeeta; Malkan, Matthew A.; Rigby, Jane R.; Kashikawa, Nobunari; de los Reyes, Mithi A.; Rhoads, James E.

2016-09-01

Deep rest-frame optical spectroscopy is critical for characterizing and understanding the physical conditions and properties of the ionized gas in galaxies. Here, we present a new spectroscopic survey called “Metal Abundances across Cosmic Time” or { M }{ A }{ C }{ T }, which will obtain rest-frame optical spectra for ˜3000 emission-line galaxies. This paper describes the optical spectroscopy that has been conducted with MMT/Hectospec and Keck/DEIMOS for ≈1900 z = 0.1-1 emission-line galaxies selected from our narrowband and intermediate-band imaging in the Subaru Deep Field. In addition, we present a sample of 164 galaxies for which we have measured the weak [O III]λ4363 line (66 with at least 3σ detections and 98 with significant upper limits). This nebular emission line determines the gas-phase metallicity by measuring the electron temperature of the ionized gas. This paper presents the optical spectra, emission-line measurements, interstellar properties (e.g., metallicity, gas density), and stellar properties (e.g., star formation rates, stellar mass). Paper II of the { M }{ A }{ C }{ T } survey (Ly et al.) presents the first results on the stellar mass-gas metallicity relation at z ≲ 1 using the sample with [O III]λ4363 measurements.

Field testing of particulate matter continuous emission monitors at the DOE Oak Ridge TSCA incinerator. Toxic Substances Control Act.

PubMed

Dunn, James E; Davis, Wayne T; Calcagno, James A; Allen, Marshall W

2002-01-01

A field study to evaluate the performance of three commercially available particulate matter (PM) continuous emission monitors (CEMs) was conducted in 1999-2000 at the US Department of Energy (DOE) Toxic Substances Control Act (TSCA) Incinerator. This study offers unique features that are believed to enhance the collective US experience with PM CEMs. The TSCA Incinerator is permitted to treat PCB-contaminated RCRA hazardous low-level radioactive wastes. The air pollution control system utilizes MACT control technology and is comprised of a rapid quench, venturi scrubber, packed bed scrubber, and two ionizing wet scrubbers in series, which create a saturated flue gas that must be conditioned by the CEMs prior to measurement. The incinerator routinely treats a wide variety of wastes including high and low BTU organic liquids, aqueous, and solid wastes. The various possible combinations for treating liquid and solid wastes may present a challenge in establishing a single, acceptable correlation relationship for individual CEMs. The effect of low-level radioactive material present in the waste is a unique site-specific factor not evaluated in previous tests. The three systems chosen for evaluation were two beta gauge devices and a light scattering device. The performance of the CEMs was evaluated using the requirements in draft Environmental Protection Agency (EPA) Performance Specification 11 (PS11) and Procedure 2. The results of Reference Method 5i stack tests for establishing statistical correlations between the reference method data and the CEMs responses are discussed.

Proteomic Analysis Reveals Resistance Mechanism Against Chlorpyrifos in Frankliniella occidentalis (Thysanoptera: Thripidae).

PubMed

Yan, Dan-Kan; Hu, Min; Tang, Yun-Xia; Fan, Jia-Qin

2015-08-01

The western flower thrips is an economically important worldwide pest of many crops, and chlorpyrifos has been used to control western flower thrips for many years. To develop a better resistance-management strategy, a chlorpyrifos-resistant strain of western flower thrips (WFT-chl) was selected in the laboratory. More than 39-fold resistance was achieved after selected by chlorpyrifos for 19 generations in comparison with the susceptible strain (WFT-S). Proteome of western flower thrips (WFT-S and WFT-chl) was investigated using a quantitative proteomics approach with isobaric tag for relative and absolute quantification technique and liquid chromatography-tandem mass spectrometry technologies. According to the functional analysis, 773 proteins identified were grouped into 10 categories of molecular functions and 706 proteins were presented in 213 kinds of pathways. Comparing the proteome of WFT-chl with that of WFT-S, a total of eight proteins were found up-regulated and three down-regulated. The results from functional annotation and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses indicated that the differentially expressed protein functions in binding, catalyzing, transporting, and enzyme regulation were most important in resistance development. A list of proteins functioning in biological processes of metabolism, biological regulation, and response to stimulus was found in WFT-chl, suggesting that they are possibly the major components of the resistance mechanism to chlorpyrifos in western flower thrips. Notably, several novel potential resistance-related proteins were identified such as ribosomal protein, Vg (vitellogenin), and MACT (muscle actin), which can be used to improve our understanding of the resistance mechanisms in western flower thrips. This study provided the first comprehensive view of the complicated resistance mechanism employed by WFT-S and WFT-chl through the isobaric tag for relative and absolute quantification coupled with liquid chromatography-tandem mass spectrometry technologies. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Molten Metal Treatment by Salt Fluxing with Low Environmental Emissions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yogeshwar Sahai

2007-07-31

Abstract: Chlorine gas is traditionally used for fluxing of aluminum melt for removal of alkali and alkaline earth elements. However this results in undesirable emissions of particulate matter and gases such as HCl and chlorine, which are often at unacceptable levels. Additionally, chlorine gas is highly toxic and its handling, storage, and use pose risks to employees and the local community. Holding of even minimal amounts of chlorine necessitates extensive training for all plant employees. Fugitive emissions from chlorine usage within the plant cause accelerated corrosion of plant equipment. The Secondary Aluminum Maximum Achievable Control Technology (MACT) under the Cleanmore » Air Act, finalized in March 2000 has set very tough new limits on particulate matter (PM) and total hydrogen chloride emissions from aluminum melting and holding furnaces. These limits are 0.4 and 0.1 lbs per ton of aluminum for hydrogen chloride and particulate emissions, respectively. Assuming new technologies for meeting these limits can be found, additional requirements under the Clean Air Act (Prevention of Significant Deterioration and New Source Review) trigger Best Available Control Technology (BACT) for new sources with annual emissions (net emissions not expressed per ton of production) over specified amounts. BACT currently is lime coated bag-houses for control of particulate and HCl emissions. These controls are expensive, difficult to operate and maintain, and result in reduced American competitiveness in the global economy. Solid salt fluxing is emerging as a viable option for the replacement of chlorine gas fluxing, provided emissions can be consistently maintained below the required levels. This project was a cooperative effort between the Ohio State University and Alcoa to investigate and optimize the effects of solid chloride flux addition in molten metal for alkali impurity and non-metallic inclusion removal minimizing dust and toxic emissions and maximizing energy conservation. In this program, the salt metal interactions were studies and the emissions at laboratory scale at OSU were monitored. The goal of the project was to obtain a fundamental understanding, based on first principles, of the pollutant formation that occurs when the salts are used in furnaces. This information will be used to control process parameters so that emissions are consistently below the required levels. The information obtained in these experiments will be used in industrial furnaces at aluminum plants and which will help in optimizing the process.« less

CAPSULE REPORT: HARD CHROME FUME ...

EPA Pesticide Factsheets

All existing information which includes the information extrapolated from the Hard Chrome Pollution Prevention Demonstration Project(s) and other sources derived from plating facilities and industry contacts, will be condensed and featured in this document. At least five chromium emission prevention/control devices have been tested covering a wide spectrum of techniques currently in use at small and large-sized chrome metal plating shops. The goal for limiting chromium emissions to levels specified in the MACT Standards are: (1) 0.030 milligrams per dry standard cubic meter of air (mg/dscm) for small facilities with existing tanks, (2) 0.015 mg/dscm for small facilities with new tanks or large facilities with existing or new tanks. It should be emphasized that chemical mist suppressants still have quality issues and work practices that need to be addressed when they are used. Some of the mist suppressants currently in use are: one-, two-, and three-stage mesh pad mist eliminators; composite mesh pad mist eliminators; packed-bed scrubbers and polyballs. This capsule report should, redominantly, emphasize pollution prevention techniques and include, but not be restricted to, the afore-mentioned devices. Information

VizieR Online Data Catalog: MACT survey. I. Opt. spectroscopy in Subaru Deep Field (Ly+, 2016)

NASA Astrophysics Data System (ADS)

Ly, C.; Malhotra, S.; Malkan, M. A.; Rigby, J. R.; Kashikawa, N.; de Los Reyes, M. A.; Rhoads, J. E.

2016-10-01

The primary results of this paper are based on optical spectroscopy conducted with Keck's Deep Imaging Multi-Object Spectrograph (DEIMOS) and MMT's Hectospec. In total, we obtain 3243 optical spectra for 1911 narrowband/intermediate-band excess emitters (roughly 20% of our narrowband/intermediate-band excess samples), and successfully detect emission lines to determine redshift for 1493 galaxies or 78% of the targeted sample. The MMT observations were conducted on 2008 March 13, 2008 April 10-11, 2008 April 14, 2014 February 27-28, 2014 March 25, and 2014 March 28-31, and correspond to the equivalent of three full nights. The Keck observations were conducted on 2004 April 23-24, 2008 May 01-02, 2009 April 25-28, 2014 May 02, and 2015 March 17/19/26. The majority of the observations were obtained in 2014-2015. The 2004 spectroscopic observations have been discussed in Kashikawa et al. (2006, J/ApJ/648/7) and Ly07 (J/ApJ/657/738), and the 2008-2009 data have been discussed in Kashikawa et al. (2011ApJ...734..119K). See section 2.2 for further details. The Subaru Deep Field (SDF) has been imaged with: (1) GALEX in both the FUV and NUV bands; (2) KPNO's Mayall telescope using MOSAIC in U; (3) Subaru telescope with Suprime-Cam in 14 bands (BVRci'z'zbzr), and five narrowband and two intermediate-band filters); (4) KPNO's Mayall telescope using NEWFIRM in H; (5) UKIRT using WFCAM in J and K; and (6) Spitzer in the four IRAC bands (3.6, 4.5, 5.8, and 8.0um). Most of these imaging data have been discussed in Ly et al. (2011ApJ...735...91L), except for the WFCAM J-band data and most of the NEWFIRM H-band data. The more recent NEWFIRM imaging data were acquired on 2012 March 06-07 and 2013 March 27-30. The WFCAM data were obtained on 2005 April 14-15, 2010 March 15-20, and 2010 April 22-23. See section 4.4 for further details. (11 data files).

Bee Venom Decreases LPS-Induced Inflammatory Responses in Bovine Mammary Epithelial Cells.

PubMed

Jeong, Chang Hee; Cheng, Wei Nee; Bae, Hyojin; Lee, Kyung Woo; Han, Sang Mi; Petriello, Michael C; Lee, Hong Gu; Seo, Han Geuk; Han, Sung Gu

2017-10-28

The world dairy industry has long been challenged by bovine mastitis, an inflammatory disease, which causes economic loss due to decreased milk production and quality. Attempts have been made to prevent or treat this disease with multiple approaches, primarily through increased abuse of antibiotics, but effective natural solutions remain elusive. Bee venom (BV) contains a variety of peptides ( e.g. , melittin) and shows multiple bioactivities, including prevention of inflammation. Thus, in the current study, it was hypothesized that BV can reduce inflammation in bovine mammary epithelial cells (MAC-T). To examine the hypothesis, cells were treated with LPS (1 μg/ml) to induce an inflammatory response and the anti-inflammatory effects of BV (2.5 and 5 μg/ml) were investigated. The cellular mechanisms of BV against LPS-induced inflammation were also investigated. Results showed that BV can attenuate expression of an inflammatory protein, COX2, and pro-inflammatory cytokines such as IL-6 and TNF-α. Activation of NF-κB, an inflammatory transcription factor, was significantly downregulated by BV in cells treated with LPS, through dephosphorylation of ERK1/2. Moreover, pretreatment of cells with BV attenuated LPS-induced production of intracellular reactive oxygen species ( e.g. , superoxide anion). These results support our hypothesis that BV can decrease LPS-induced inflammatory responses in bovine mammary epithelial cells through inhibition of oxidative stress, NF-κB, ERK1/2, and COX-2 signaling.

All the Missiles Work: Technological Dislocations and Military Innovation: A Case Study in US Air Force Air-to-Air Armament, Post-World War II through Operation Rolling Thunder

DTIC Science & Technology

2015-01-01

technological momentum attempted to reconcile two of the disparate perspectives???social constructivism and technological determinism . The theory of...perspectives—social constructivism and technological determinism . The theory of technological dislocations advanced by this thesis is a refinement of...constructivism to technological determinism is unidirectional.114 His theory therefore tends to focus historical analysis on characterizing the

A System Analysis for Determining Alternative Technological Issues for the Future

NASA Technical Reports Server (NTRS)

Magistrale, V. J.; Small, J.

1967-01-01

A systems engineering methodology is provided, by which future technological ventures may be examined utilizing particular national, corporate, or individual value judgments. Three matrix analyses are presented. The first matrix is concerned with the effect of technology on population increase, war, poverty, health, resources, and prejudice. The second matrix explores an analytical technique for determining the relative importance of different areas of technology. The third matrix explores how an individual or corporate entity may determine how its capability may be used for future technological opportunities. No conclusions are presented since primary effort has been placed on the methodology of determining future technological issues.

"Obligatory Technologies": Explaining Why People Feel Compelled to Use Certain Technologies

ERIC Educational Resources Information Center

Chandler, Jennifer A.

2012-01-01

The ideas of technological determinism and the autonomy of technology are long-standing and widespread. This article explores why the use of certain technologies is perceived to be obligatory, thus fueling the fatalism of technological determinism and undermining our sense of freedom vis-a-vis the use of technologies. Three main mechanisms that…

Technological Determinism in Educational Technology Research: Some Alternative Ways of Thinking about the Relationship between Learning and Technology

ERIC Educational Resources Information Center

Oliver, M.

2011-01-01

This paper argues that research on the educational uses of technology frequently overemphasizes the influence of technology. Research in the field is considered a form of critical perspective, and assumptions about technology are questioned. Technological determinism is introduced, and different positions on this concept are identified. These are…

Moving beyond Technological Determinism and Autonomy to Face Our Responsibilities

ERIC Educational Resources Information Center

Vanderburg, Willem H.

2012-01-01

This article shows that technological neutrality, determinism, and autonomy correspond to parts of a spectrum of possible historical relations between societies and their technologies. The spectrum of relations is based on the recognition that as we change technology, technology simultaneously changes us. This reinterpretation compels us to face…

[Treatment of Osteochondral Lesions in the Ankle: A Guideline from the Group "Clinical Tissue Regeneration" of the German Society of Orthopaedics and Traumatology (DGOU)].

PubMed

Aurich, M; Albrecht, D; Angele, P; Becher, C; Fickert, S; Fritz, J; Müller, P E; Niemeyer, P; Pietschmann, M; Spahn, G; Walther, M

2017-02-01

Background: Osteochondral lesions (OCL) of the ankle are a common cause of ankle pain. Although the precise pathophysiology has not been fully elucidated, it can be assumed that a variety of factors are responsible, mainly including traumatic events such as ankle sprains. Advances in arthroscopy and imaging techniques, in particular magnetic resonance imaging (MRI), have improved the possibilities for the diagnosis of OCLs of the ankle. Moreover, these technologies aim at developing new classification systems and modern treatment strategies. Material and Methods: This article is a review of the literature. Recommendations of the group "Clinical Tissue Regeneration" of the German Society of Orthopaedics and Traumatology (DGOU) for the treatment of OCLs of the ankle are presented. The review gives a concise overview on the results of clinical studies and discusses advantages and disadvantages of different treatment strategies. Results: Non-operative treatment shows good results for selected indications in children and adolescents, especially in early stages of osteochondritis dissecans (OCD). However, surgical treatment is usually indicated in OCLs in adolescents and adults, depending on the size and location of the lesion. Various arthroscopic and open procedures are frequently employed, including reattachment of the fragment, local debridement of the lesion with fragment removal and curettage of the lesion, bone marrow-stimulation by microfracture or microdrilling (antegrade or retrograde), and autologous matrix-induced chondrogenesis (AMIC®) - with or without reconstruction of a subchondral bone defect or cyst by autologous cancellous bone grafting. Isolated subchondral cysts with an intact cartilage surface can be treated by retrograde drilling and possibly additional retrograde bone grafting. For larger defects or as salvage procedure, osteochondral cylinder transplantation (OATS® or Mosaicplasty®) or matrix-induced autologous chondrocyte transplantation (MACT) are recommended. Transplantation of so-called (osteochondral) mega grafts, such as autologous bone grafts or allografts, are used for very large osteochondral defects that cannot be reconstructed otherwise. Implantation of the so-called "small metal implants" - such as HemiCAP Talus® - is reserved for selected cases after failed primary reconstruction. Corrective osteotomies are indicated in accompanying axial malalignments. Conclusions: There are several different treatment strategies for OCLs, but clinical studies are rare and evidence is limited. Therefore, interventional studies, e.g. randomised controlled trials (RCTs), but also observational studies, e.g. based on data of the Cartilage Registry of the German Society of Orthopaedics and Traumatology (www.knorpelregister-dgou.de), are needed and are recommended by the authors. Georg Thieme Verlag KG Stuttgart · New York.

75 FR 30783 - Reestablishment of the Technology Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-02

... COMMODITY FUTURES TRADING COMMISSION Reestablishment of the Technology Advisory Committee AGENCY...: The Commodity Futures Trading Commission has determined to reestablish the charter of its Technology... Commission (``Commission'') has determined to reestablish its Technology Advisory Committee. The Commission...

Teaching Technological Knowledge: Determining and Supporting Student Learning of Technological Concepts

ERIC Educational Resources Information Center

Compton, Vicki J.; Compton, Ange D.

2013-01-01

This paper reports on findings related to Technological Knowledge from Stage Two of the "Technological Knowledge and Nature of Technology: Implications for teaching and learning" ("TKNoT: Imps") research project undertaken in 2009. A key focus in Stage Two was the trialing of different teaching strategies to determine how…

40 CFR 63.325 - Determination of equivalent emission control technology.

Code of Federal Regulations, 2010 CFR

2010-07-01

... control technology. 63.325 Section 63.325 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Determination of equivalent emission control technology. (a) Any person requesting that the use of certain... equivalent emission reductions: (1) Diagrams, as appropriate, illustrating the emission control technology...

Teaching the Nature of Technology: Determining and Supporting Student Learning of the Philosophy of Technology

ERIC Educational Resources Information Center

Compton, Vicki J.; Compton, Ange D.

2013-01-01

This paper reports on findings related to the Nature of Technology from Stage Two of the "Technological Knowledge and Nature of Technology: Implications for teaching and learning" ("TKNoT: Imps") research project undertaken in 2009. A key focus in Stage Two was the trialing of different teaching strategies to determine how…

AN ENVIRONMENTAL TECHNOLOGY VERIFICATION (ETV) TESTING OF SEVEN TECHNOLOGIES DETECTING TOXICITY IN DRINKING WATER (R2)

EPA Science Inventory

Rapid toxicity technologies can detect certain toxins and with testing it can be determined their susceptibility to interfering chemical in controlled experimental matrix. Rapid toxicity technologies do not identify or determine the concentrations of specific contaminants, but s...

77 FR 55498 - Certain Electronic Imaging Devices; Commission Determination Not To Review an Initial...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-10

... presiding administrative law judge's (``ALJ'') initial determination (``ID'') (Order No. 6) granting a motion by complainant FlashPoint Technology, Inc. (``Flashpoint'') and respondents Huawei Technologies Co., Ltd. and FutureWei Technologies, Inc. d/b/a Huawei Technologies (USA) (collectively ``the Huawei...

Distributing responsibility in the debate on sustainable biofuels.

PubMed

Landeweerd, Laurens; Osseweijer, Patricia; Kinderlerer, Julian

2009-12-01

In the perception of technology innovation two world views compete for domination: technological and social determinism. Technological determinism holds that societal change is caused by technological developments, social determinism holds the opposite. Although both were quite central to discussion in the philosophy, history and sociology of technology in the 1970s and 1980s, neither is seen as mainstream now. They do still play an important role as background philosophies in societal debates and offer two very different perspectives on where the responsibilities for an ethically sound development of novel technologies lie. In this paper we will elaborate on these to two opposing views on technology development taking the recent debate on the implementation of biofuels as a case example.

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2014 CFR

2014-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be...

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2012 CFR

2012-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Adjustment in Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be...

42 CFR 416.195 - Determination of membership in new classes of new technology IOLs.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technology IOLs. 416.195 Section 416.195 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT... Payment Amounts for New Technology Intraocular Lenses Furnished by Ambulatory Service Centers § 416.195 Determination of membership in new classes of new technology IOLs. (a) Factors to be considered. CMS uses the...

Technologies for Self-Determination for Youth with Developmental Disabilities. Technologies for Voice: A Critical Issues Brief

ERIC Educational Resources Information Center

Skouge, James R.; Kelly, Mary L.; Roberts, Kelly D.; Leake, David W.; Stodden, Robert A.

2007-01-01

This paper focuses on "technologies for voice" that are related to the self-determination of youth with developmental disabilities. The authors describe a self-determination model that values family-focused, community-referenced pedagogies employing "new media" to give voice to youth and their families. In line with the adage that a picture is…

Rehabilitation Technology Review.

ERIC Educational Resources Information Center

Hatherleigh Co., Ltd., New York, NY.

Designed as a special continuing education program for rehabilitation professionals, this document is divided into five lessons. Lesson 1, "Technology Assessment: Determining the Needs" (Ricardo G. Cerna), includes discussion on technology assessment and determining the needs of the clients as well as different types of assistive…

Technology selection for ballast water treatment by multi-stakeholders: A multi-attribute decision analysis approach based on the combined weights and extension theory.

PubMed

Ren, Jingzheng

2018-01-01

This objective of this study is to develop a generic multi-attribute decision analysis framework for ranking the technologies for ballast water treatment and determine their grades. An evaluation criteria system consisting of eight criteria in four categories was used to evaluate the technologies for ballast water treatment. The Best-Worst method, which is a subjective weighting method and Criteria importance through inter-criteria correlation method, which is an objective weighting method, were combined to determine the weights of the evaluation criteria. The extension theory was employed to prioritize the technologies for ballast water treatment and determine their grades. An illustrative case including four technologies for ballast water treatment, i.e. Alfa Laval (T 1 ), Hyde (T 2 ), Unitor (T 3 ), and NaOH (T 4 ), were studied by the proposed method, and the Hyde (T 2 ) was recognized as the best technology. Sensitivity analysis was also carried to investigate the effects of the combined coefficients and the weights of the evaluation criteria on the final priority order of the four technologies for ballast water treatment. The sum weighted method and the TOPSIS was also employed to rank the four technologies, and the results determined by these two methods are consistent to that determined by the proposed method in this study. Copyright © 2017 Elsevier Ltd. All rights reserved.

Staphylococcus aureus-Induced G2/M Phase Transition Delay in Host Epithelial Cells Increases Bacterial Infective Efficiency

PubMed Central

Almeida, Sintia; Legembre, Patrick; Edmond, Valérie; Azevedo, Vasco; Miyoshi, Anderson; Even, Sergine; Taieb, Frédéric; Arlot-Bonnemains, Yannick; Le Loir, Yves; Berkova, Nadia

2013-01-01

Staphylococcus aureus is a highly versatile, opportunistic pathogen and the etiological agent of a wide range of infections in humans and warm-blooded animals. The epithelial surface is its principal site of colonization and infection. In this work, we investigated the cytopathic effect of S. aureus strains from human and animal origins and their ability to affect the host cell cycle in human HeLa and bovine MAC-T epithelial cell lines. S. aureus invasion slowed down cell proliferation and induced a cytopathic effect, resulting in the enlargement of host cells. A dramatic decrease in the number of mitotic cells was observed in the infected cultures. Flow cytometry analysis revealed an S. aureus-induced delay in the G2/M phase transition in synchronous HeLa cells. This delay required the presence of live S. aureus since the addition of the heat-killed bacteria did not alter the cell cycle. The results of Western blot experiments showed that the G2/M transition delay was associated with the accumulation of inactive cyclin-dependent kinase Cdk1, a key inducer of mitosis entry, and with the accumulation of unphosphorylated histone H3, which was correlated with a reduction of the mitotic cell number. Analysis of S. aureus proliferation in asynchronous, G1- and G2-phase-enriched HeLa cells showed that the G2 phase was preferential for bacterial infective efficiency, suggesting that the G2 phase delay may be used by S. aureus for propagation within the host. Taken together, our results divulge the potential of S. aureus in the subversion of key cellular processes such as cell cycle progression, and shed light on the biological significance of S. aureus-induced host cell cycle alteration. PMID:23717407

The determinants of medical technology adoption in different decisional systems: A systematic literature review.

PubMed

Varabyova, Yauheniya; Blankart, Carl Rudolf; Greer, Ann Lennarson; Schreyögg, Jonas

2017-03-01

Studies of determinants of adoption of new medical technology have failed to coalesce into coherent knowledge. A flaw obscuring strong patterns may be a common habit of treating a wide range of health care innovations as a generic technology. We postulate three decisional systems that apply to different medical technologies with distinctive expertise, interest, and authority: medical-individualistic, fiscal-managerial, and strategic-institutional decisional systems. This review aims to examine the determinants of the adoption of medical technologies based on the corresponding decision-making system. We included quantitative and qualitative studies that analyzed factors facilitating or inhibiting the adoption of medical technologies. In total, 65 studies published between 1974 and 2014 met our inclusion criteria. These studies contained 688 occurrences of variables that were used to examine the adoption decisions, and we subsequently condensed these variables to 62 determinants in four main categories: organizational, individual, environmental, and innovation-related. The determinants and their empirical association with adoption were grouped and analyzed by the three decision-making systems. Although we did not identify substantial differences across the decision-making systems in terms of the direction of the determinants' influence on adoption, a clear pattern emerged in terms of the categories of determinants that were targeted in different decision-making systems. Copyright © 2017 Elsevier B.V. All rights reserved.

Keeping the Physical Educator "Connected" an Examination of Comfort Level, Usage and Professional Development Available for Technology Integration in the Curricular Area of Physical Education

ERIC Educational Resources Information Center

Adkins, Megan; Bice, Matthew R.; Worrell, Vicki; Unruh, Nita

2017-01-01

Schools continue to integrate the use of technology, and gymnasiums are not an exception. The purpose of the study was to determine the comfort level of Physical Education teachers integrating technology in the gymnasium, determine types of professional development provided for technology use, and potential barriers associated with technology…

A Quasi-Experimental Study of Two Selected Units of the Industrial Arts Curriculum Project Materials to Determine the Measurable Additive Effects of a Unit on Design in Manfacturing Technology upon a Similar Unit on Design in Construction Technology.

ERIC Educational Resources Information Center

Kuwik, Paul David

The purpose of the study was to determine whether exposing junior high school students to a unit on design in construction technology and to a unit on design in manufacturing technology significantly affects their achievement on a test measuring "Technological Principles of Design" when compared to a group of junior high school students exposed…

Economic impact of stimulated technological activity. Part 1: Overall economic impact of technological progress: Its measurement

NASA Technical Reports Server (NTRS)

1971-01-01

Investigations were performed at the national economic level to explore the aggregate effects of technological progress on economic growth. Inadequacies in existing marco-economic yardsticks forced the study to focus on the cost savings effects achieved through technological progress. The central questions discussed in this report cover: (1) role of technological progress in economic growth, (2) factors determining the rate of economic growth due to technological progress; (3) quantitative measurements of relationships between technological progress, its determinants, and subsequent economic growth; and (4) effects of research and development activities of the space program. For Part 2, see N72-32174.

Awareness of technology-induced errors and processes for identifying and preventing such errors.

PubMed

Bellwood, Paule; Borycki, Elizabeth M; Kushniruk, Andre W

2015-01-01

There is a need to determine if organizations working with health information technology are aware of technology-induced errors and how they are addressing and preventing them. The purpose of this study was to: a) determine the degree of technology-induced error awareness in various Canadian healthcare organizations, and b) identify those processes and procedures that are currently in place to help address, manage, and prevent technology-induced errors. We identified a lack of technology-induced error awareness among participants. Participants identified there was a lack of well-defined procedures in place for reporting technology-induced errors, addressing them when they arise, and preventing them.

Determining Trends and Issues in Educational Technology through Content Analysis.

ERIC Educational Resources Information Center

Ely, Donald P.; And Others

A content analysis was performed to determine the trends and issues in educational technology for the period from October 1, 1987 through September 30, 1988. Sources for the analysis included five leading professional journals in educational technology, papers given at annual conventions of three professional associations, dissertations from five…

40 CFR 63.1035 - Quality improvement program for pumps.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determine the services, operating or maintenance practices, and pump or pump seal designs or technologies... analysis shall also be used to determine if there are superior performing pump or pump seal technologies... with poorer than average emission performance. A superior performing pump or pump seal technology is...

40 CFR 63.1035 - Quality improvement program for pumps.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determine the services, operating or maintenance practices, and pump or pump seal designs or technologies... analysis shall also be used to determine if there are superior performing pump or pump seal technologies... with poorer than average emission performance. A superior performing pump or pump seal technology is...

40 CFR 63.1035 - Quality improvement program for pumps.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determine the services, operating or maintenance practices, and pump or pump seal designs or technologies... analysis shall also be used to determine if there are superior performing pump or pump seal technologies... with poorer than average emission performance. A superior performing pump or pump seal technology is...

40 CFR 63.1035 - Quality improvement program for pumps.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determine the services, operating or maintenance practices, and pump or pump seal designs or technologies... analysis shall also be used to determine if there are superior performing pump or pump seal technologies... with poorer than average emission performance. A superior performing pump or pump seal technology is...

40 CFR 98.223 - Calculating GHG emissions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... following the N2O abatement technology. (e) If applicable, you must determine the abatement factor for each... under normal process operating conditions and without using N2O abatement technology (if applicable). (3... determine the destruction efficiency for each N2O abatement technology according to paragraphs (d)(1), (d)(2...

Which Technologies Do Pre-Service Teachers Prefer to Use While Presenting Their Teaching Skills and for What Purposes Do They Use These Technologies?

ERIC Educational Resources Information Center

Oren, Fatma Sasmaz

2017-01-01

This research aims to determine the technologies that pre-service science teachers prefer to use in micro teaching presentations performed for improving their teaching skills and to determine the purposes of using these technologies. For this purpose, the case study model was used in the research. The research was made with some 48 pre-service…

Technological Developments That Will Influence Teachers' Use of Technology to Improve Student Learning in California's Public Middle Schools by the Year 2017

ERIC Educational Resources Information Center

Solorzano, Monica

2013-01-01

Purpose. The purpose of this study was to (a) identify 5 top developments in educational technology that will be available to California's public middle schools in the next 5 years, (b) determine the likelihood of implementing these technological developments in California's public middle schools in the next 5 years, (c) determine the impact these…

Adapting the Media and Technology Usage and Attitudes Scale to Turkish

ERIC Educational Resources Information Center

Özgür, Hasan

2016-01-01

Due to the requirement of a current, valid, and reliable assessment instrument for determining usage frequencies of technology-based media and the attitudes towards these, this study intends to determine the validity and reliability of the Media and Technology Usage and Attitudes Scale, developed by researchers from California State University,…

The Perceived Technology Proficiency of Students in a Teacher Education Program

ERIC Educational Resources Information Center

Coffman, Vonda G.

2013-01-01

The purpose of this study is to determine the perceived technology capabilities of different levels of undergraduate students of Kent State University in the College of Education, Health, and Human Services teacher education programs; to determine if the perceived technology capabilities of students beginning the teacher education program differ…

Philosophy of Technology Assumptions in Educational Technology Leadership: Questioning Technological Determinism

ERIC Educational Resources Information Center

Webster, Mark David

2013-01-01

Scholars have emphasized that decisions about technology can be influenced by philosophy of technology assumptions, and have argued for research that critically questions technological determinist assumptions. Empirical studies of technology management in fields other than K-12 education provided evidence that philosophy of technology assumptions,…

Propulsion Study for Small Transport Aircraft Technology (STAT)

NASA Technical Reports Server (NTRS)

Gill, J. C.; Earle, R. V.; Staton, D. V.; Stolp, P. C.; Huelster, D. S.; Zolezzi, B. A.

1980-01-01

Propulsion requirements were determined for 0.5 and 0.7 Mach aircraft. Sensitivity studies were conducted on both these aircraft to determine parametrically the influence of propulsion characteristics on aircraft size and direct operating cost (DOC). Candidate technology elements and design features were identified and parametric studies conducted to select the STAT advanced engine cycle. Trade off studies were conducted to determine those advanced technologies and design features that would offer a reduction in DOC for operation of the STAT engines. These features were incorporated in the two STAT engines. A benefit assessment was conducted comparing the STAT engines to current technology engines of the same power and to 1985 derivatives of the current technology engines. Research and development programs were recommended as part of an overall technology development plan to ensure that full commercial development of the STAT engines could be initiated in 1988.

Determining Potential in the Army’s Officer Corps: Leveraging Technology to Manage and Promote Active Duty Captains Based on Merit

DTIC Science & Technology

2017-06-09

DETERMINING POTENTIAL IN THE ARMY’S OFFICER CORPS: LEVERAGING TECHNOLOGY TO MANAGE AND PROMOTE ACTIVE DUTY CAPTAINS BASED ON MERIT...Determining Potential in the Army’s Officer Corps: Leveraging Technology to Manage and Promote Active Duty Captains Based on Merit 5a. CONTRACT...NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Major Ross Carlos Pixler 5d. PROJECT NUMBER 5e. TASK NUMBER 5f

Understanding consumer attitudes toward food technologies in Canada.

PubMed

Henson, Spencer; Annou, Mamane; Cranfield, John; Ryks, Joanne

2008-12-01

This article reports a study on consumer attitudes to 21 food and nonfood technologies in Canada. The study involves repertory grid interviews with 36 food consumers, the data from which are analyzed using generalized Procrustes analysis. Results highlight the role of perceived risk and perceived benefit in determining the acceptability of the technologies, with individual technologies lying along a continuum between the two. For technology as a whole and the 21 specific technologies, the perceived risk and perceived benefit constructs were the dominant determinants of consumer acceptability. While perceptions of perceived risk and perceived benefit differed between individual respondents, there were very limited consistent relations with a range of sociodemographic variables.

An Empirical Analysis of the Determinants of Mobile Instant Messaging Appropriation in University Learning

ERIC Educational Resources Information Center

Bere, Aaron; Rambe, Patient

2016-01-01

Research on technology adoption often profiles device usability (such as perceived usefulness) and user dispositions (such as perceived ease of use) as the prime determinants of effective technology adoption. Since any process of technology adoption cannot be conceived out of its situated contexts, this paper argues that any pre-occupation with…

The Supply and Demand of Technology and Engineering Teachers in the United States: Who Knows?

ERIC Educational Resources Information Center

Moye, Johnny J.

2017-01-01

The purpose of this study was to determine the supply and demand of technology and engineering teachers in the United States. Once gathered, the resulting data (that was available) was compared to previous studies to determine trends. The researcher reviewed the 2010-11 through 2015-16 Technology & Engineering Teacher Education Directories. To…

Determining Candidate Teachers' Tendency to the Use of Technology

ERIC Educational Resources Information Center

Hursen, Cigdem

2017-01-01

This study aimed to determine candidate teachers' tendency to the use of technology. A total of 293 candidate teachers participated in this study in which a quantitative method was used. The findings obtained from the research indicated that the candidate teachers' tendency to the use of technology was high. Another finding in a different research…

Gauging Technology Costs and Benefits

ERIC Educational Resources Information Center

Kaestner, Rich

2007-01-01

Regardless of the role technology plays in a school district, district personnel should know the costs associated with technology, understand the consequences of technology purchases, and be able to measure the benefits of technology, so they can make more informed decisions. However, determining costs and benefits of current technology or…

A Study of the Integrated Alignment of Technology and Organizational Strategic Planning in Small Private Liberal Arts Colleges and Universities

ERIC Educational Resources Information Center

Schneider, Sheree A.

2010-01-01

The purpose of this study was to determine the relationship between technology planning and strategic planning in small private liberal arts colleges and universities that were members of the Appalachian College Association (ACA). The objective of the study was to determine if the technology initiatives were appropriately aligned to the…

Determinants of Intention to Use eLearning Based on the Technology Acceptance Model

ERIC Educational Resources Information Center

Punnoose, Alfie Chacko

2012-01-01

The purpose of this study was to find some of the predominant factors that determine the intention of students to use eLearning in the future. Since eLearning is not just a technology acceptance decision but also involves cognition, this study extended its search beyond the normal technology acceptance variables into variables that could affect…

A Study to Determine the Basic Science and Mathematics Topics Most Needed by Engineering Technology Graduates of Wake Technical Institute in Performing Job Duties.

ERIC Educational Resources Information Center

Edwards, Timothy I.; Roberson, Clarence E., Jr.

A survey of 470 graduates of the six engineering technology programs at Wake Technical Institute--Architectural, Chemical, Civil Engineering, Computer, Electronic Engineering, and Industrial Engineering Technologies--and 227 of their employers was conducted in October, 1979, to determine the science and mathematics topics most needed by…

One to One Technology and Its Effect on Student Academic Achievement and Motivation

ERIC Educational Resources Information Center

Harris, Jennifer L.; Al-Bataineh, Mohammed T.; Al-Bataineh, Adel

2016-01-01

This research was a quantitative study using 4th grade participants from a Title 1 elementary school in Central Illinois. This study set out to determine whether one to one technology (1:1 will be used hereafter) truly impacts and effects the academic achievement of students. This study's second goal was to determine whether 1:1 Technology also…

An Analysis of Industrial Technology Curriculum and Its Significance to the Casting Industry.

ERIC Educational Resources Information Center

Hauser, Roger Emmett

The purpose of this study was to determine to what extent industrial technology programs are training technologists in light of the needs of the casting industry. To determine the type of curriculum needed to prepare individuals for entry into the casting industry, and to study industrial technology programs as they relate to metal casting,…

Technologies for Self-Determination for Youth with Developmental Disabilities

ERIC Educational Resources Information Center

Skouge, James R.; Kelly, Mary L.; Roberts, Kelly D.; Leake, David W.; Stodden, Robert A.

2007-01-01

This paper focuses on "technologies for voice" that are related to the self-determination of youth with developmental disabilities. The authors describe a self-determination model that values family-focused, community-referenced pedagogies employing "new media" to give voice to youth and their families. In line with the adage that a picture is…

In-Space Cryogenic Propellant Depot (ISCPD) Architecture Definitions and Systems Studies

NASA Technical Reports Server (NTRS)

Fikes, John C.; Howell, Joe T.; Henley, Mark

2006-01-01

The objectives of the ISCPD Architecture Definitions and Systems Studies were to determine high leverage propellant depot architecture concepts, system configuration trades, and related technologies to enable more ambitious and affordable human and robotic exploration of the Earth Neighborhood and beyond. This activity identified architectures and concepts that preposition and store propellants in space for exploration and commercial space activities, consistent with Exploration Systems Research and Technology (ESR&T) objectives. Commonalities across mission scenarios for these architecture definitions, depot concepts, technologies, and operations were identified that also best satisfy the Vision of Space Exploration. Trade studies were conducted, technology development needs identified and assessments performed to drive out the roadmap for obtaining an in-space cryogenic propellant depot capability. The Boeing Company supported the NASA Marshall Space Flight Center (MSFC) by conducting this Depot System Architecture Development Study. The primary objectives of this depot architecture study were: (1) determine high leverage propellant depot concepts and related technologies; (2) identify commonalities across mission scenarios of depot concepts, technologies, and operations; (3) determine the best depot concepts and key technology requirements and (4) identify technology development needs including definition of ground and space test article requirements.

Methodological approaches of health technology assessment.

PubMed

Goodman, C S; Ahn, R

1999-12-01

In this era of evolving health care systems throughout the world, technology remains the substance of health care. Medical informatics comprises a growing contribution to the technologies used in the delivery and management of health care. Diverse, evolving technologies include artificial neural networks, computer-assisted surgery, computer-based patient records, hospital information systems, and more. Decision-makers increasingly demand well-founded information to determine whether or how to develop these technologies, allow them on the market, acquire them, use them, pay for their use, and more. The development and wider use of health technology assessment (HTA) reflects this demand. While HTA offers systematic, well-founded approaches for determining the value of medical informatics technologies, HTA must continue to adapt and refine its methods in response to these evolving technologies. This paper provides a basic overview of HTA principles and methods.

Energy Technology Allocation for Distributed Energy Resources: A Technology-Policy Framework

NASA Astrophysics Data System (ADS)

Mallikarjun, Sreekanth

Distributed energy resources (DER) are emerging rapidly. New engineering technologies, materials, and designs improve the performance and extend the range of locations for DER. In contrast, constructing new or modernizing existing high voltage transmission lines for centralized generation are expensive and challenging. In addition, customer demand for reliability has increased and concerns about climate change have created a pull for swift renewable energy penetration. In this context, DER policy makers, developers, and users are interested in determining which energy technologies to use to accommodate different end-use energy demands. We present a two-stage multi-objective strategic technology-policy framework for determining the optimal energy technology allocation for DER. The framework simultaneously considers economic, technical, and environmental objectives. The first stage utilizes a Data Envelopment Analysis model for each end-use to evaluate the performance of each energy technology based on the three objectives. The second stage incorporates factor efficiencies determined in the first stage, capacity limitations, dispatchability, and renewable penetration for each technology, and demand for each end-use into a bottleneck multi-criteria decision model which provides the Pareto-optimal energy resource allocation. We conduct several case studies to understand the roles of various distributed energy technologies in different scenarios. We construct some policy implications based on the model results of set of case studies.

Beyond technology acceptance to effective technology use: a parsimonious and actionable model.

PubMed

Holahan, Patricia J; Lesselroth, Blake J; Adams, Kathleen; Wang, Kai; Church, Victoria

2015-05-01

To develop and test a parsimonious and actionable model of effective technology use (ETU). Cross-sectional survey of primary care providers (n = 53) in a large integrated health care organization that recently implemented new medication reconciliation technology. Surveys assessed 5 technology-related perceptions (compatibility with work values, implementation climate, compatibility with work processes, perceived usefulness, and ease of use) and 1 outcome variable, ETU. ETU was measured as both consistency and quality of technology use. Compatibility with work values and implementation climate were found to have differential effects on consistency and quality of use. When implementation climate was strong, consistency of technology use was high. However, quality of technology use was high only when implementation climate was strong and values compatibility was high. This is an important finding and highlights the importance of users' workplace values as a key determinant of quality of use. To extend our effectiveness in implementing new health care information technology, we need parsimonious models that include actionable determinants of ETU and account for the differential effects of these determinants on the multiple dimensions of ETU. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

System analysis for technology transfer readiness assessment of horticultural postharvest

NASA Astrophysics Data System (ADS)

Hayuningtyas, M.; Djatna, T.

2018-04-01

Availability of postharvest technology is becoming abundant, but only a few technologies are applicable and useful to a wider community purposes. Based on this problem it requires a significant readiness level of transfer technology approach. This system is reliable to access readiness a technology with level, from 1-9 and to minimize time of transfer technology in every level, time required technology from the selection process can be minimum. Problem was solved by using Relief method to determine ranking by weighting feasible criteria on postharvest technology in each level and PERT (Program Evaluation Review Technique) to schedule. The results from ranking process of post-harvest technology in the field of horticulture is able to pass level 7. That, technology can be developed to increase into pilot scale and minimize time required for technological readiness on PERT with optimistic time of 7,9 years. Readiness level 9 shows that technology has been tested on the actual conditions also tied with estimated production price compared to competitors. This system can be used to determine readiness of technology innovation that is derived from agricultural raw materials and passes certain stages.

Study of Terrestrial Radio Determination : Applications and Technology

DOT National Transportation Integrated Search

1979-02-01

The report describes the results of a study of terrestrial radio determination (TRD) applications and technology. Considerable emphasis has been placed on automatic automotive vehicle location or monitoring (AVL or AVM) systems because almost all of ...

EPA'S ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has evaluated technologies to determine their effectiveness in monitoring, preventing, controlling, and cleaning up pollution. Since the early 1990s, however, numerous government and private groups have determined that the lack of a...

EPA'S ENVIRONMENTAL TECHNOLOGY PROGRAM (ETV) FACTSHEET

EPA Science Inventory

Throughout its history, the U.S. Environmental Protection Agency has evaluated technologies to determine their effectiveness in monitoring, preventing, controlling and cleaning up pollution. Since the early 1990s, however, numerous government and private groups have determined t...

ALTERNATIVE REMEDIATION TECHNOLOGY STUDY FOR GROUNDWATER TREATMENT AT 200-PO-1 OPERABLE UNIT AT HANFORD SITE

DOE Office of Scientific and Technical Information (OSTI.GOV)

DADO MA

2008-07-31

This study focuses on the remediation methods and technologies applicable for use at 200-PO-I Groundwater Operable Unit (OU) at the Hanford Site. The 200-PO-I Groundwater au requires groundwater remediation because of the existence of contaminants of potential concern (COPC). A screening was conducted on alternative technologies and methods of remediation to determine which show the most potential for remediation of groundwater contaminants. The possible technologies were screened to determine which would be suggested for further study and which were not applicable for groundwater remediation. COPCs determined by the Hanford Site groundwater monitoring were grouped into categories based on properties linkingmore » them by remediation methods applicable to each COPC group. The screening considered the following criteria. (1) Determine if the suggested method or technology can be used for the specific contaminants found in groundwater and if the technology can be applied at the 200-PO-I Groundwater au, based on physical characteristics such as geology and depth to groundwater. (2) Evaluate screened technologies based on testing and development stages, effectiveness, implementability, cost, and time. This report documents the results of an intern research project conducted by Mathew Dado for Central Plateau Remediation in the Soil and Groundwater Remediation Project. The study was conducted under the technical supervision of Gloria Cummins and management supervision of Theresa Bergman and Becky Austin.« less

Solar Technology Options and Resource Assessment | State, Local, and Tribal

Science.gov Websites

Governments | NREL Technology Options and Resource Assessment Solar Technology Options and covers solar technology options, how they work, and how to determine whether your location is appropriate

High Leverage Technologies for In-Space Assembly of Complex Structures

NASA Technical Reports Server (NTRS)

Hamill, Doris; Bowman, Lynn M.; Belvin, W. Keith; Gilman, David A.

2016-01-01

In-space assembly (ISA), the ability to build structures in space, has the potential to enable or support a wide range of advanced mission capabilities. Many different individual assembly technologies would be needed in different combinations to serve many mission concepts. The many-to-many relationship between mission needs and technologies makes it difficult to determine exactly which specific technologies should receive priority for development and demonstration. Furthermore, because enabling technologies are still immature, no realistic, near-term design reference mission has been described that would form the basis for flowing down requirements for such development and demonstration. This broad applicability without a single, well-articulated mission makes it difficult to advance the technology all the way to flight readiness. This paper reports on a study that prioritized individual technologies across a broad field of possible missions to determine priority for future technology investment.

The Impact of Interactive Whiteboard Technology on Ninth Grade English at Selected Rural High Schools in Upstate South Carolina

ERIC Educational Resources Information Center

Smith, Mark S.

2013-01-01

The purpose of this study was to determine the impact of interactive whiteboard technology on ninth grade English End of Course scores in two high schools in the Upstate of South Carolina in the school year 2011-2012. This study also sought to determine what impact interactive whiteboard technology had on the factors of gender, socio-economic…

76 FR 30974 - Amended Revised Determination on Reconsideration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... Revised Determination on Reconsideration UAW-Chrysler Technical Training Center, Technology Training Joint... December 22, 2010, applicable to workers of UAW-Chrysler Technical Training Center, Technology Training Joint Programs Staff, Detroit, Michigan and Warren, Michigan. Workers provide technical training such as...

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2014 CFR

2014-01-01

... determining whether to continue, modify, or terminate an information technology program or project. (iii..., computer conferencing, televideo technologies, and other applications of office automation technology which... information technology system project managers in accordance with OMB policies. (D) Providing recommendations...

Hydrogen tomorrow: Demands and technology requirements

NASA Technical Reports Server (NTRS)

1975-01-01

National needs for hydrogen are projected and the technologies of production, handling, and utilization are evaluated. Research and technology activities required to meet the projected needs are determined.

Technique for Determination of Rational Boundaries in Combining Construction and Installation Processes Based on Quantitative Estimation of Technological Connections

NASA Astrophysics Data System (ADS)

Gusev, E. V.; Mukhametzyanov, Z. R.; Razyapov, R. V.

2017-11-01

The problems of the existing methods for the determination of combining and technologically interlinked construction processes and activities are considered under the modern construction conditions of various facilities. The necessity to identify common parameters that characterize the interaction nature of all the technology-related construction and installation processes and activities is shown. The research of the technologies of construction and installation processes for buildings and structures with the goal of determining a common parameter for evaluating the relationship between technologically interconnected processes and construction works are conducted. The result of this research was to identify the quantitative evaluation of interaction construction and installation processes and activities in a minimum technologically necessary volume of the previous process allowing one to plan and organize the execution of a subsequent technologically interconnected process. The quantitative evaluation is used as the basis for the calculation of the optimum range of the combination of processes and activities. The calculation method is based on the use of the graph theory. The authors applied a generic characterization parameter to reveal the technological links between construction and installation processes, and the proposed technique has adaptive properties which are key for wide use in organizational decisions forming. The article provides a written practical significance of the developed technique.

Technology Integration: A Best Practice Perspective

ERIC Educational Resources Information Center

Lesisko, Lee J.; Wright, Robert J.; O'Hern, Brenda

2010-01-01

The technology coordinator has the responsibility of collaborating with school leaders and educators to integrate technology into the curriculum and operations of the school. Not only does this individual have to understand how technology works, but also must determine the best way to infuse it in a school setting. Technology leaders must possess…

75 FR 71464 - Metlife Technology, Operations, and Information Technology Groups Including On-Site Leased...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-23

... negative determination regarding the eligibility of workers and former workers of MetLife, Technology, Operations, and Information Technology Groups, Moosic, Pennsylvania (TA-W-73,210) and MetLife, Technology... software testing and quality assurance services, and are not separately identifiable by service supplied...

Economic Perspectives of Technological Progress: New Dimensions for Forecasting Technology

ERIC Educational Resources Information Center

Twiss, Brian

1976-01-01

Discusses the causal relationship between the allocation of financial resources and technological growth. Argues that economic constraints are becoming an important determinant of technological progress that must be incorporated into technology forecasting techniques. (Available from IPC (America) Inc., 205 East 42 Street, New York, NY 10017;…

The integration of technology into the middle and high school science curriculum

NASA Astrophysics Data System (ADS)

Corbin, Jan Frederic

This study was to determine the level of technology implementation into the middle and high school science curriculum by beginning teachers. Research was conducted in two phases. The first phase was a survey that provided demographic data and determined the Level of Technology Implementation, Personal Computer Use, and Current Instructional Practice. Dr. Christopher Moersch developed the survey, Level of Technology Implementation (LoTi(c) ). The data provided insight into what technology teachers use, barriers associated with technology integration, teacher training and development, and technical support. Follow-up interviews were conducted to gather additional qualitative data and information. Analysis of the data found beginning teachers have not received enough technology training to integrate technology seamlessly into the science curriculum. Conclusions cite the need for more technology courses during preservice education, more time during the day for beginning teachers to learn to use the technology available at their schools, consolidation of inservice staff development offerings, and more technical support staff readily available. Recommendations were made to expand the study group to all science teachers, assess the technology capacity of all schools, and conduct needs assessment of inservice staff development.

The Impact of a Technology Integration Academy on Instructional Technology Integration in a Texas School District

ERIC Educational Resources Information Center

Burkholder, Karla

2013-01-01

This applied dissertation was designed to determine the impact of a technology integration professional development on high school teachers' technology integration and students' use of computers in core content areas. The District invested in technology for all classrooms, as well as 1:1 technology for all secondary students with an expectation…

Protecting Defense Technologies: DOD Assessment Needed to Determine Requirement for Critical Technologies List

DTIC Science & Technology

2013-01-01

Service DTSA Defense Technology Security Administration MCTL Militarily Critical Technologies List This is a work of the U.S. government and is not...Respond to MCTL Weaknesses Page 8 GAO-13-157 Protecting Defense Technologies Administration ( DTSA ), military services, and DOD...implementation of technology security policies on international transfers of defense- related goods, services, and technologies; • directed DTSA to

Flight Technology Improvement. [spaceborne optical radiometric instruments, attitude control, and electromechanical and power subsystems

NASA Technical Reports Server (NTRS)

1979-01-01

Shortcomings in spaceborne instrumentation technology are analyzed and recommendations are given for corrections and technology development. The technologies discussed are optical radiometric instruments and calibration, attitude control and determination, and electromechanical and power subsystems.

78 FR 16296 - Certain Optoelectronic Devices for Fiber Optic Communications, Components Thereof, and Products...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-14

... Technologies'') to amend the complaint and notice of investigation (``NOI''). FOR FURTHER INFORMATION CONTACT... Fiber Optic Communications, Components Thereof, and Products Containing Same; Commission Determination Not To Review an Initial Determination Granting Complainants Avago Technologies General IP (Singapore...

Scale, Composition, and Technology

ERIC Educational Resources Information Center

Victor, Peter A.

2009-01-01

Scale (gross domestic product), composition (goods and services), and technology (impacts per unit of goods and services) in combination are the proximate determinants in an economy of the resources used, wastes generated, and land transformed. In this article, we examine relationships among these determinants to understand better the contribution…

A decision support tool for synchronizing technology advances with strategic mission objectives

NASA Technical Reports Server (NTRS)

Hornstein, Rhoda S.; Willoughby, John K.

1992-01-01

Successful accomplishment of the objectives of many long-range future missions in areas such as space systems, land-use planning, and natural resource management requires significant technology developments. This paper describes the development of a decision-support data-derived tool called MisTec for helping strategic planners to determine technology development alternatives and to synchronize the technology development schedules with the performance schedules of future long-term missions. Special attention is given to the operations, concept, design, and functional capabilities of the MisTec. The MisTec was initially designed for manned Mars mission, but can be adapted to support other high-technology long-range strategic planning situations, making it possible for a mission analyst, planner, or manager to describe a mission scenario, determine the technology alternatives for making the mission achievable, and to plan the R&D activity necessary to achieve the required technology advances.

Managing Technology Is Different.

ERIC Educational Resources Information Center

Levinson, Eliot; Grohe, Barbara

2002-01-01

Discusses methods that school superintendents can use to manage technology issues in their schools beyond traditional delegation. Highlights include participation more than delegation to a technology coordinator; identifying the right problems; determining what to make and what to buy; and the need for continual technology funding. (LRW)

77 FR 37389 - Renewal of the Technology Advisory Committee

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... COMMODITY FUTURES TRADING COMMISSION Renewal of the Technology Advisory Committee AGENCY... Commodity Futures Trading Commission has determined to renew the charter of its Technology Advisory... and identity that it is for the renewal of the Technology Advisory Committee. All comments must be...

Motivators of Classroom Technology Use and Types of Technology Being Used in Public Elementary Schools in an Urban School District

ERIC Educational Resources Information Center

Heffernan, Ruth M.

2012-01-01

Although the public school district under study values technology, the district did not have a measurement tool specifically designed to determine motivators of teacher usage of technology and what technology is being used. Such a tool could be used to make informed decisions about technology purchases and professional development opportunities.…

Perceptions of Company Employees on Technology and Office Technologies Training.

ERIC Educational Resources Information Center

Mellan, James R.

A study was conducted to determine the impact technology would have on the developing scenario of a competitive market for the training and retraining of both the unemployed and employed. The objective was to identify the perceptions of employees concerning technology and the effectiveness and efficiency of office technology training. The study…

Technology Readiness Level Guidebook

DOT National Transportation Integrated Search

2017-09-01

This guidebook provides the necessary information for conducting a Technology Readiness Level (TRL) Assessment. TRL Assessments are a tool for determining the maturity of technologies and identifying next steps in the research process. This guidebook...

Factors that Predict Quality Classroom Technology Use

ERIC Educational Resources Information Center

Hastings, Tricia A.

2009-01-01

Despite technological advancements intended to enhance teaching and learning in the 21st century, numerous teacher and school factors continue to impede quality classroom technology use. Determining the effectiveness of educational technology is challenging and requires a detailed understanding of multifaceted, complex, contextual relationships.…

Optimal technology investment strategies for a reusable launch vehicle

NASA Technical Reports Server (NTRS)

Moore, A. A.; Braun, R. D.; Powell, R. W.

1995-01-01

Within the present budgetary environment, developing the technology that leads to an operationally efficient space transportation system with the required performance is a challenge. The present research focuses on a methodology to determine high payoff technology investment strategies. Research has been conducted at Langley Research Center in which design codes for the conceptual analysis of space transportation systems have been integrated in a multidisciplinary design optimization approach. The current study integrates trajectory, propulsion, weights and sizing, and cost disciplines where the effect of technology maturation on the development cost of a single stage to orbit reusable launch vehicle is examined. Results show that the technology investment prior to full-scale development has a significant economic payoff. The design optimization process is used to determine strategic allocations of limited technology funding to maximize the economic payoff.

The Users' Views on Different Types of Instructional Materials Provided in Virtual Reality Technologies

ERIC Educational Resources Information Center

Yildirim, Gürkan

2017-01-01

Today, it is seen that developing technologies are tried to be used continuously in the learning environments. These technologies have rapidly been diversifying and changing. Recently, virtual reality technology has become one of the technologies that experts have often been dwelling on. The present research tries to determine users' opinions and…

Evaluation of Policy and Research Interventions in Science and Technology: Consequence Assessment of Regulatory and Technology Transfer Programs

ERIC Educational Resources Information Center

Dias, Mary Beatrice

2011-01-01

This research contributes to efforts in assessment studies related to science and technology interventions. The work presented in this thesis focuses on understanding the effects of policies that influence science and technology interventions, and determining the impact of science and technology interventions themselves. Chapter 1 explores how…

A Teacher's Approach: Integrating Technology Appropriately into a First Grade Classroom

ERIC Educational Resources Information Center

Phalen, Loretta Jean

2004-01-01

How are first grade classrooms using technology? How are children using technology at home? Does the use of technology really improve academic achievement? An experiment was conducted to determine the effectiveness of using technology to teach a unit in Social Studies to first grade students. The study occurred in a Christian school in Lancaster,…

DETERMINATION OF THE STRONG ACIDITY OF ATMOSPHERIC FINE PARTICLES (<2.5 UM) USING ANNULAR DENUDER TECHNOLOGY

EPA Science Inventory

This report is a standardized methodology description for the determination of strong acidity of fine particles (less than 2.5 microns) in ambient air using annular denuder technology. his methodology description includes two parts: art A - Standard Method and Part B - Enhanced M...

78 FR 32464 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... domestic industry in an investigation resulting in-- (A) an affirmative determination of serious injury or... William Arthur, Inc., West Kennebunk, ME... April 17, 2012. Manpower. 82,682 Aclara Technologies LLC, Solon, OH April 22, 2012. Esco Technologies, Integrity Staffing, Manpower, etc. 82,692 ADP Workscape...

Determination of selection criteria for spray drift reduction from atomization data

USDA-ARS?s Scientific Manuscript database

When testing and evaluating drift reduction technologies (DRT), there are different metrics that can be used to determine if the technology reduces drift as compared to a reference system. These metrics can include reduction in percent of fine drops, measured spray drift from a field trial, or comp...

Determinants of E-Learning Adoption in Universities: Evidence from a Developing Country

ERIC Educational Resources Information Center

Ansong, Eric; Lovia Boateng, Sheena; Boateng, Richard

2017-01-01

This study sought to explore the technological, organizational, and environmental determinants of e-learning adoption in University of Ghana using a multistakeholder approach. Another construct (nature of the course) was added to the traditional constructs of the technology-organization-environment framework. Using survey research, e-learning…

Microbial Protein-Antigenome Determination (MAD) Technology: A Proteomics-Based Strategy for Rapid Identification of Microbial Targets of Host Humoral Immune Responses

USDA-ARS?s Scientific Manuscript database

Immunogenic, pathogen-specific proteins have excellent potential for development of novel management modalities. Here, we describe an innovative application of proteomics called Microbial protein-Antigenome Determination (MAD) Technology for rapid identification of native microbial proteins that el...

Microbial Protein-Antigenome Determination (MAD) Technology: A Proteomics-Based Strategy for Rapid Identification of Microbial Targets of Host Humoral Immune Responses

USDA-ARS?s Scientific Manuscript database

Immunogenic, pathogen-specific proteins have excellent potential for development of novel management modalities. Here, we describe an innovative application of proteomics called Microbial protein-Antigenome Determination (MAD) Technology for rapid identification of native microbial proteins that eli...

Psycho-Social Determinants of Gender Prejudice in Science, Technology, Engineering and Mathematics

ERIC Educational Resources Information Center

Nnachi, N. O.; Okpube, M. N.

2015-01-01

This work focused on the "Psycho-social Determinants of Gender Prejudice in Science, Technology, Engineering and Mathematics (STEM)". The females were found to be underrepresented in STEM fields. The under-representation results from gender stereotype, differences in spatial skills, hierarchical and territorial segregations and…

An Evaluation of Videoconferencing as a Supportive Technology for Practicum Supervision

ERIC Educational Resources Information Center

Dymond, Stacy K.; Renzaglia, Adelle; Halle, James W.; Chadsey, Janis; Bentz, Johnell L.

2008-01-01

In this study, the authors determine the efficacy of videoconferencing to supervise pre-service special education teachers. Efficacy is determined by (a) assessing interobserver reliability between on-site and off-site observers and (b) evaluating the feasibility and practicality of the videoconferencing technology. Data are collected in two…

ZENON ENVIRONMENTAL, INC.; CROSS-FLOW PERVAPORATION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT (EPA/540/R-95/511)

EPA Science Inventory

A demonstration of the Zenon cross-flow pervaporation technology was conducted under the Superfund Innovative Technology Evaluation (SITE) program in February 1995 to determine the removal efficiency of trichloroethylene (TCE) from groundwaters at the Naval Air Station North Isla...

Assistive Technology: What Physical Educators Need to Know

ERIC Educational Resources Information Center

Laughlin, Michael K.; Murata, Nathan M.; Gonnelli, Michele; Larranaga, John

2018-01-01

Assistive technology supplements and supports the learning of students with disabilities in school and at home. Thanks to federal mandates, students with disabilities receive consideration for assistive technology devices and services--the tools and supports needed to achieve determined learning outcomes. Assistive technology devices and services…

The possibility of low-budget GNSS equipment using for cadastral work for the Unified State Real Estate Cadastre purposes and transport link

NASA Astrophysics Data System (ADS)

Kosarev, Nikolai; Terentyev, Dmitry; Solnyshkova, Olga; Makarikhina, Inna

2017-10-01

The article considers geodetic methods for determining land plots location during cadastral work. The analysis of technological solutions in coordinates determining of the land plots’ characteristic points and their areas was carried out. The accuracy of geodetic methods in the cadastral work implementation was assessed. The priority technology was identified, including the use of low-budget GNSS equipment for this very task. The areas values were obtained and root-mean-squares of boundary marks position calculated by means of chosen technology are presented. The estimation and justification of the selected technology for cadastral work is given.

Cost-effectiveness analysis: problems and promise for evaluating medical technology

NASA Astrophysics Data System (ADS)

Juday, Timothy R.

1994-12-01

Although using limited financial resources in the most beneficial way, in principle, a laudable goal, actually developing standards for measuring the cost-effectiveness of medical technologies and incorporating them into the coverage process is a much more difficult proposition. Important methodological difficulties include determining how to compare a technology to its leading alternative, defining costs, incorporating patient preferences, and defining health outcomes. In addition, more practical questions must be addressed. These questions include: who does the analysis? who makes the decisions? which technologies to evaluate? what resources are required? what is the political and legal environment? how much is a health outcome worth? The ultimate question that must be answered is what is a health outcome worth? Cost-effectiveness analysis cannot answer this question; it only enables comparison of cost-effectiveness ratios across technologies. In order to determine whether a technology should be covered, society or individual insurers must determine how much they are willing to pay for the health benefits. Conducting cost-effectiveness analysis will not remove the need to make difficult resource allocation decisions; however, explicitly examining the tradeoffs involved in these decisions should help to improve the process.

76 FR 175 - Faurecia Emissions Control Technologies Including On-Site Leased Workers From Adecco Employment...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-03

... Technologies Including On-Site Leased Workers From Adecco Employment Servcies and Emcon Technologies, Troy, MI..., applicable to workers of Faurecia Emissions Control Technologies, Troy, Michigan, including on-site leased workers from Adecco Employment Services, Troy, Michigan. The Department's notice of determination was...

Use of Technology in the Household: An Exploratory Study

ERIC Educational Resources Information Center

Jackson, Barcus C.

2010-01-01

Since the 1980s, personal computer ownership has become ubiquitous, and people are increasingly using household technologies for a wide variety of purposes. Extensive research has resulted in useful models to explain workplace technology acceptance and household technology adoption. Studies have also found that the determinants underlying…

Information Technologies in Florida's Rural Hospitals: Does System Affiliation Matter?

ERIC Educational Resources Information Center

Menachemi, Nir; Burke, Darrell; Clawson, Art; Brooks, Robert G.

2005-01-01

Context: The recent explosive growth of information technology in hospitals promises to improve hospital and patient outcomes. Financial barriers may cause rural hospitals to lag in adoption of information technology, however, formal studies that examine rural hospital adoption of information technology are lacking. Purpose: To determine the…

Enhanced Geothermal Systems (EGS) Well Construction Technology Evaluation Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polsky, Yarom; Capuano, Louis; Finger, John

2008-12-01

This report provides an assessment of well construction technology for EGS with two primary objectives: 1. Determining the ability of existing technologies to develop EGS wells. 2. Identifying critical well construction research lines and development technologies that are likely to enhance prospects for EGS viability and improve overall economics.

Evaluating Outsourcing Information Technology and Assurance Expertise by Small Non-Profit Organizations

ERIC Educational Resources Information Center

Guinn, Fillmore

2013-01-01

Small non-profit organizations outsource at least one information technology or information assurance process. Outsourcing information technology and information assurance processes has increased every year. The study was to determine the key reasons behind the choice to outsource information technology and information assurance processes. Using…

Factors Impacting Teachers' Adoption of Mobile Learning

ERIC Educational Resources Information Center

Mac Callum, Kathryn; Jeffrey, Lynn; Kinshuk

2014-01-01

As mobile technology has advanced, awareness is growing that these technologies may benefit teaching and learning. However, despite this interest, the factors that will determine the acceptance of mobile technology by lecturers have been limited. This study proposed and tested a new model that extends the technology acceptance model (TAM) with…

78 FR 1265 - Dana Holding Corporation; Power Technologies Group Division; Including On-Site Leased Workers...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-08

...; Power Technologies Group Division; Including On-Site Leased Workers From Manpower Milwaukee, WI; Notice... former workers of Dana Holding Company, Power Technologies Group Division, Milwaukee, Wisconsin (subject... reconsideration investigation, I determine that workers of Dana Holding Company, Power Technologies Group Division...

Identifying Advanced Technologies for Education's Future.

ERIC Educational Resources Information Center

Moore, Gwendolyn B.; Yin, Robert K.

A study to determine how three advanced technologies might be applied to the needs of special education students helped inspire the development of a new method for identifying such applications. This new method, named the "Hybrid Approach," combines features of the two traditional methods: technology-push and demand-pull. Technology-push involves…

75 FR 1446 - Future Systems Technology Advisory Panel Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-11

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2010-0001] Future Systems Technology Advisory Panel... systems technology and electronic services at the agency five to ten years into the future. The Panel will recommend a road map to aid SSA in determining what future systems technologies may be developed to assist...

77 FR 35057 - Importer of Controlled Substances; Notice of Registration; Rhodes Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... Registration; Rhodes Technologies By Notice dated April 17, 2012, and published in the Federal Register on April 26, 2012, 77 FR 24984, Rhodes Technologies, 498 Washington Street, Coventry, Rhode Island 02816...(a) and 952(a) and determined that the registration of Rhodes Technologies to import the basic...

Investing Wisely in Information Technology: Asking the Right Questions.

ERIC Educational Resources Information Center

Breivik, Patricia Senn

1993-01-01

College administrators are offered a series of questions to ask in evaluating the appropriateness of information technology for their campuses. Issues addressed include defining institutional goals and the role of information technology in them, determining the most effective organization of information resources and technology, and allocation of…

Selection and Evaluation of Potential Reference Genes for Gene Expression Analysis in the Brown Planthopper, Nilaparvata lugens (Hemiptera: Delphacidae) Using Reverse-Transcription Quantitative PCR

PubMed Central

Zhu, Xun; Wan, Hu; Shakeel, Muhammad; Zhan, Sha; Jin, Byung-Rae; Li, Jianhong

2014-01-01

The brown planthopper (BPH), Nilaparvata lugens (Hemiptera, Delphacidae), is one of the most important rice pests. Abundant genetic studies on BPH have been conducted using reverse-transcription quantitative real-time PCR (qRT-PCR). Using qRT-PCR, the expression levels of target genes are calculated on the basis of endogenous controls. These genes need to be appropriately selected by experimentally assessing whether they are stably expressed under different conditions. However, such studies on potential reference genes in N. lugens are lacking. In this paper, we presented a systematic exploration of eight candidate reference genes in N. lugens, namely, actin 1 (ACT), muscle actin (MACT), ribosomal protein S11 (RPS11), ribosomal protein S15e (RPS15), alpha 2-tubulin (TUB), elongation factor 1 delta (EF), 18S ribosomal RNA (18S), and arginine kinase (AK) and used four alternative methods (BestKeeper, geNorm, NormFinder, and the delta Ct method) to evaluate the suitability of these genes as endogenous controls. We examined their expression levels among different experimental factors (developmental stage, body part, geographic population, temperature variation, pesticide exposure, diet change, and starvation) following the MIQE (Minimum Information for publication of Quantitative real time PCR Experiments) guidelines. Based on the results of RefFinder, which integrates four currently available major software programs to compare and rank the tested candidate reference genes, RPS15, RPS11, and TUB were found to be the most suitable reference genes in different developmental stages, body parts, and geographic populations, respectively. RPS15 was the most suitable gene under different temperature and diet conditions, while RPS11 was the most suitable gene under different pesticide exposure and starvation conditions. This work sheds light on establishing a standardized qRT-PCR procedure in N. lugens, and serves as a starting point for screening for reference genes for expression studies of related insects. PMID:24466124

The Metal Abundances across Cosmic Time (MACT) Survey. II. Evolution of the Mass-metallicity Relation over 8 Billion Years, Using [OIII]4363AA-based Metallicities

NASA Astrophysics Data System (ADS)

Ly, Chun; Malkan, Matthew A.; Rigby, Jane R.; Nagao, Tohru

2016-09-01

We present the first results from MMT and Keck spectroscopy for a large sample of 0.1≤slant z≤slant 1 emission-line galaxies selected from our narrowband imaging in the Subaru Deep Field. We measured the weak [O III] λ4363 emission line for 164 galaxies (66 with at least 3σ detections, and 98 with significant upper limits). The strength of this line is set by the electron temperature for the ionized gas. Because the gas temperature is regulated by the metal content, the gas-phase oxygen abundance is inversely correlated with [O III] λ4363 line strength. Our temperature-based metallicity study is the first to span ≈ 8 Gyr of cosmic time and ≈ 3 dex in stellar mass for low-mass galaxies, {log}({M}\\star /{M}⊙ )≈ 6.0-9.0. Using extensive multi-wavelength photometry, we measure the evolution of the stellar mass-gas metallicity relation and its dependence on dust-corrected star formation rate (SFR). The latter is obtained from high signal-to-noise Balmer emission-line measurements. Our mass-metallicity relation is consistent with Andrews & Martini at z≤slant 0.3, and evolves toward lower abundances at a given stellar mass, {log}{({{O/H}})\\propto (1+z)}-{2.32-0.26+0.52}. We find that galaxies with lower metallicities have higher SFRs at a given stellar mass and redshift, although the scatter is large (≈ 0.3 dex) and the trend is weaker than seen in local studies. We also compare our mass-metallicity relation against predictions from high-resolution galaxy formation simulations, and find good agreement with models that adopt energy- and momentum-driven stellar feedback. We identified 16 extremely metal-poor galaxies with abundances of less than a tenth of solar; our most metal-poor galaxy at z≈ 0.84 is similar to I Zw 18.

Selection and evaluation of potential reference genes for gene expression analysis in the brown planthopper, Nilaparvata lugens (Hemiptera: Delphacidae) using reverse-transcription quantitative PCR.

PubMed

Yuan, Miao; Lu, Yanhui; Zhu, Xun; Wan, Hu; Shakeel, Muhammad; Zhan, Sha; Jin, Byung-Rae; Li, Jianhong

2014-01-01

The brown planthopper (BPH), Nilaparvata lugens (Hemiptera, Delphacidae), is one of the most important rice pests. Abundant genetic studies on BPH have been conducted using reverse-transcription quantitative real-time PCR (qRT-PCR). Using qRT-PCR, the expression levels of target genes are calculated on the basis of endogenous controls. These genes need to be appropriately selected by experimentally assessing whether they are stably expressed under different conditions. However, such studies on potential reference genes in N. lugens are lacking. In this paper, we presented a systematic exploration of eight candidate reference genes in N. lugens, namely, actin 1 (ACT), muscle actin (MACT), ribosomal protein S11 (RPS11), ribosomal protein S15e (RPS15), alpha 2-tubulin (TUB), elongation factor 1 delta (EF), 18S ribosomal RNA (18S), and arginine kinase (AK) and used four alternative methods (BestKeeper, geNorm, NormFinder, and the delta Ct method) to evaluate the suitability of these genes as endogenous controls. We examined their expression levels among different experimental factors (developmental stage, body part, geographic population, temperature variation, pesticide exposure, diet change, and starvation) following the MIQE (Minimum Information for publication of Quantitative real time PCR Experiments) guidelines. Based on the results of RefFinder, which integrates four currently available major software programs to compare and rank the tested candidate reference genes, RPS15, RPS11, and TUB were found to be the most suitable reference genes in different developmental stages, body parts, and geographic populations, respectively. RPS15 was the most suitable gene under different temperature and diet conditions, while RPS11 was the most suitable gene under different pesticide exposure and starvation conditions. This work sheds light on establishing a standardized qRT-PCR procedure in N. lugens, and serves as a starting point for screening for reference genes for expression studies of related insects.

Rotorcraft convertible engine study

NASA Technical Reports Server (NTRS)

Gill, J. C.; Earle, R. V.; Mar, H. M.

1982-01-01

The objective of the Rotorcraft Convertible Engine Study was to define future research and technology effort required for commercial development by 1988 of convertible fan/shaft gas turbine engines for unconventional rotorcraft transports. Two rotorcraft and their respective missions were defined: a Fold Tilt Rotor aircraft and an Advancing Blade Concept (ABC) rotorcraft. Sensitivity studies were conducted with these rotorcraft to determine parametrically the influence of propulsion characteristics on aircraft size, mission fuel requirements, and direct operating costs (DOC). The two rotorcraft were flown with conventional propulsion systems (separate lift/cruise engines) and with convertible propulsion systems to determine the benefits to be derived from convertible engines. Trade-off studies were conducted to determine the optimum engine cycle and staging arrangement for a convertible engine. Advanced technology options applicable to convertible engines were studied. Research and technology programs were identified which would ensure technology readiness for commercial development of convertible engines by 1988.

From Natural Monopoly to Public Utility: Technological Determinism and the Political Economy of Infrastructure in Progressive-Era America.

PubMed

Plaiss, Adam

In present-day debates regarding telecommunication policy, one frequently hears the terms natural monopoly and public utility. This article investigates the origins of these ideas, finding that Richard T. Ely-a celebrated American economist of the late nineteenth century-embedded in the term "natural monopoly" a narrative of technological determinism. By arguing that certain services had monopolizing tendencies hardwired into them, Ely argued for their regulation. Ely's theory of natural monopoly formed the basis of Wisconsin's 1907 public utilities law, which served as a model for many other states' regulatory policies. The modern notion of public utility thus carries with it the technological determinism of Ely's natural monopoly idea. By tracing the lineage of these two terms, this article recaptures the influence that activists and progressive politicians exercised over the formation of large technological systems during the Second Industrial Revolution.

Industry-Cost-Curve Approach for Modeling the Environmental Impact of Introducing New Technologies in Life Cycle Assessment.

PubMed

Kätelhön, Arne; von der Assen, Niklas; Suh, Sangwon; Jung, Johannes; Bardow, André

2015-07-07

The environmental costs and benefits of introducing a new technology depend not only on the technology itself, but also on the responses of the market where substitution or displacement of competing technologies may occur. An internationally accepted method taking both technological and market-mediated effects into account, however, is still lacking in life cycle assessment (LCA). For the introduction of a new technology, we here present a new approach for modeling the environmental impacts within the framework of LCA. Our approach is motivated by consequential life cycle assessment (CLCA) and aims to contribute to the discussion on how to operationalize consequential thinking in LCA practice. In our approach, we focus on new technologies producing homogeneous products such as chemicals or raw materials. We employ the industry cost-curve (ICC) for modeling market-mediated effects. Thereby, we can determine substitution effects at a level of granularity sufficient to distinguish between competing technologies. In our approach, a new technology alters the ICC potentially replacing the highest-cost producer(s). The technologies that remain competitive after the new technology's introduction determine the new environmental impact profile of the product. We apply our approach in a case study on a new technology for chlor-alkali electrolysis to be introduced in Germany.

Technologies Enhance Tumor Surgery: Helping Surgeons Spot and Remove Cancer

MedlinePlus

... Special Issues Subscribe February 2016 Print this issue Technologies Enhance Tumor Surgery Helping Surgeons Spot and Remove ... over time. NIH-funded researchers are developing new technologies to help surgeons determine exactly where tumors end ...

Determinants of R and D Compensation Strategies in the High Tech Industry.

ERIC Educational Resources Information Center

Balkin, David B.; Gomez-Mejia, Luis R.

1984-01-01

Interviewed managers in high technology and traditional firms (N=105) to explore the determinants of research and development compensation practices and policies in high technology firms. Results indicated that sales volume, stage in the product life cycle, profitabilty, and turnover are predictors of the method and magnitude of financial rewards.…

Receptivity toward Assistive Computer Technology by Non-Users Who Are Blind/Visually Impaired

ERIC Educational Resources Information Center

Leff, Lisa

2012-01-01

The non-use of assistive computer technology by some people who are legallyblind/visually-impaired was investigated to determine the reasons for lack of interest (Chiang, Cole, Gupta, Kaiser, & Starren, 2006; Williamson, Wright, Schauder & Bow, 2001). Social and psychological factors implicated in non-interest were determined by profiling…

Mathematics Achievement: Traditional Instruction and Technology-Assisted Course Delivery Methods

ERIC Educational Resources Information Center

Vilardi, Robert

2013-01-01

The purpose of this study was to analyze technology-assisted course delivery methods to determine their overall effectiveness as it pertains to mathematics courses. This study analyzed both current and historical data in mathematics classes in the areas of achievement, retention, and grade distribution. The goal of this study was to determine if…

77 FR 41697 - Stay of the Effectiveness of Requirements; Approval and Promulgation of Implementation Plans; New...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-16

... Technology Determination AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule. SUMMARY: The EPA... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 52 [EPA-R06-OAR-2010-0846; FRL-9698-3] Stay of the... Visibility and Best Available Retrofit Technology Determination'' under the authority of the Administrative...

Student Perceptions of a Summer Ventures in Science and Mathematics Camp Experience

ERIC Educational Resources Information Center

Binns, Ian C.; Polly, Drew; Conrad, James; Algozzine, Bob

2016-01-01

"As the world becomes increasingly technological, the value of (the ideas and skills of its population) will be determined in no small measure by the effectiveness of science, technology, engineering, and mathematics (STEM) education in the United States" and "STEM education will determine whether the United States will remain a…

On-orbit technology experiment facility definition

NASA Technical Reports Server (NTRS)

Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

1988-01-01

A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

Determination of nursing students' attitudes towards the use of technology.

PubMed

Terkes, Nurten; Celik, Ferya; Bektas, Hicran

2018-03-11

The use of technology is increasingly important in nursing education and practice. For this reason, it is necessary to determine the attitudes of nursing students towards technology. This study was conducted with 508 nursing students. A personal information form that was prepared by the researchers and the Attitudes Toward Technology Scale were used as the data collection tools. The mean score that was obtained by the nursing students from the Attitudes Toward Technology Scale was 61.53 ± 1.13. The Cronbach's alpha coefficient was found to be 0.90. There was a statistically significant difference between the sexes, using a computer, tablet, or laptop, using technology to reach health-related information, and for professional development, using mobile applications related to drug information. There was also a statistical difference between using the Periscope and Scorpio accounts from social media and using Excel and PowerPoint from Microsoft programs. Nursing students are capable of technology-based teaching, which can be expanded as a result. © 2018 Japan Academy of Nursing Science.

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2010 CFR

2010-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2012 CFR

2012-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2014 CFR

2014-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2011 CFR

2011-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

25 CFR 700.465 - Technical feasibility.

Code of Federal Regulations, 2013 CFR

2013-04-01

... construction, technology, or another engineering project, however, an application for a construction, technology or another engineering project shall: (a) Include sufficient information to determine the nature... construction, technology, or other engineering project prior to construction. The Commission shall review the...

40 CFR 94.218 - Deterioration factor determination.

Code of Federal Regulations, 2011 CFR

2011-07-01

... family. (b) Calculation procedures—(1) For engines not utilizing aftertreatment technology (e.g... technology (e.g., catalyst). For each applicable emission constituent, a multiplicative deterioration factor.... (iii) Engineering analysis for established technologies. In the case where an engine family uses...

The process for technology transfer in Baltimore

NASA Technical Reports Server (NTRS)

Golden, T. S.

1978-01-01

Ingredients essential for a successful decision process relative to proper technological choices for a large city were determined during four years of experience in the NASA/Baltimore Applications Project. The general approach, rationale, and process of technology transfer are discussed.

78 FR 771 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-04

... Technologies, Eco Energy Solutions. 81,965 Melco Engraving, Inc...... Rochester Hills, MI.. 81,975 Xerox Corporation, Solid Wilsonville, OR...... Ink Development Group, Global Technology Development Group. I hereby...., HCL Technologies Limited. [[Page 773

Shedding Light on Students' Technology Preferences: Implications for Academic Development

ERIC Educational Resources Information Center

Mirriahi, Negin; Alonzo, Dennis

2015-01-01

This study built on previous research in 2010 to determine changes to students' current use of and expectations for future integration of technologies in their learning experience. The findings reveal a continued trend of conservative technology use amongst students but with a growing demand for more integration of technologies for assessment and…

The Effect of Selected Instructional Approaches in Technology Education on Students' Attitude toward Technology.

ERIC Educational Resources Information Center

Boser, Richard; And Others

A pre- and posttest research design was used to ascertain whether instructional approaches used by technology teachers affected the attitudes of 155 seventh-grade students toward technology. It also determined whether males and females responded differently to these instructional approaches. A validated attitudinal instrument, the Pupils'…

Relationship of Technology Skill Competencies and Reading and Math Standardized Test Scores

ERIC Educational Resources Information Center

Jordan, Stacie L.

2012-01-01

The purpose of this study was to determine if a relationship exists between technology skills and academic achievement among eighth-grade students. Previous studies investigated the relationship between the use of technology as a teaching tool and student outcomes, but none had specifically examined students' technology skill competencies with…

The Relationship between Teachers' Attitudes toward Technology and Technology Use

ERIC Educational Resources Information Center

DeCuir, Alvin F., Jr.

2012-01-01

Researchers have recognized that technology use is critical to students' engagement and the resulting increase in higher order thinking skills. However, educators are not using available technology to engage students' higher order thinking. Both the purpose of this study and the research question was to determine if teachers'…

A Framework for Developing Self-Directed Technology Use for Language Learning

ERIC Educational Resources Information Center

Lai, Chun

2013-01-01

Critical to maximizing the potential of technology for learning is enhancing language learners' self-directed use of technology for learning purposes. This study aimed to enhance our understanding of the determinants of self-directed technology use through the construction of a structural equation modelling (SEM) framework of factors and…

An Examination of Middle School Counselors' Comfort with Technology

ERIC Educational Resources Information Center

Roddy, Patricia Christina

2013-01-01

The purpose of the current study was to investigate the differences in comfort with technology in middle school counselors in South Carolina. The researcher's goal was to determine the effects of years of experience, technology training, gender, and age on middle school counselors' comfort with technology. After a review of literature, it has been…

Deconstructing Technological Literacy: Opening a Window to Problem Solving

ERIC Educational Resources Information Center

Ward, Brandt

2015-01-01

In an environment of rapid and unpredictable change determined and directed by technologies that are constantly changing, the assumption that being technologically literate is the key to being a sustained, contributing life-long learner is well founded. However, technological literacy is seldom referred to or considered in academic arguments as a…

14 CFR Appendix A to Subpart U of... - GCNP Quiet Aircraft Technology Designation

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false GCNP Quiet Aircraft Technology Designation... to Subpart U of Part 93—GCNP Quiet Aircraft Technology Designation This appendix contains procedures for determining the GCNP quiet aircraft technology designation status for each aircraft subject to...

14 CFR Appendix A to Subpart U of... - GCNP Quiet Aircraft Technology Designation

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false GCNP Quiet Aircraft Technology Designation... to Subpart U of Part 93—GCNP Quiet Aircraft Technology Designation This appendix contains procedures for determining the GCNP quiet aircraft technology designation status for each aircraft subject to...

14 CFR Appendix A to Subpart U of... - GCNP Quiet Aircraft Technology Designation

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false GCNP Quiet Aircraft Technology Designation... to Subpart U of Part 93—GCNP Quiet Aircraft Technology Designation This appendix contains procedures for determining the GCNP quiet aircraft technology designation status for each aircraft subject to...

14 CFR Appendix A to Subpart U of... - GCNP Quiet Aircraft Technology Designation

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false GCNP Quiet Aircraft Technology Designation... to Subpart U of Part 93—GCNP Quiet Aircraft Technology Designation This appendix contains procedures for determining the GCNP quiet aircraft technology designation status for each aircraft subject to...

77 FR 31388 - Importer of Controlled Substances; Notice of Registration; Meridian Medical Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-25

... Registration; Meridian Medical Technologies By Notice dated March 23, 2012, and published in the Federal Register on April 2, 2012, 77 FR 19716, Meridian Medical Technologies, 2555 Hermelin Drive, St. Louis...) and 952(a), and determined that the registration of Meridian Medical Technologies to import the basic...

Meet the Promise of Content Standards: Tapping Technology to Enhance Professional Learning

ERIC Educational Resources Information Center

Killion, Joellen

2013-01-01

More stakeholders are turning to technology to advance the professional learning required to support new standards and evaluation systems. Yet how technology is used will determine its potential to influence educator practice and results for students. This brief outlines how technology can enhance professional learning, offers examples of how…

The Effect of Internet Usage on Technology Comprehension of Physics Students: A Case Study

ERIC Educational Resources Information Center

Guzel, Hatice

2011-01-01

Rapid technological enhancements and changes necessitate people who can understand the relation between science and technology and perceive as well as comment on technological enhancements. The aim of the present study was to determine physics students comprehension of the operation principles of wired telephone, mobile phone, and latest medical…

Determining Science Teachers' Levels of Motivation and Self-Regulation Regarding Use of Education Technologies

ERIC Educational Resources Information Center

Efe, Hülya Aslan; Baysal, Yunus Emre

2017-01-01

In line with the growing importance of use of education technologies in the field of education, teachers are increasingly expected to use education technologies in class environment and to provide students with appropriate environments and opportunities to use these technologies. This situation makes it necessary to investigate teachers'…

Diffusion of Appropriate Educational Technology in Open & Distance Learning in Developing Commonwealth Countries. Final Project Report.

ERIC Educational Resources Information Center

Williams, Roy

The Diffusion of Appropriate Educational Technology in Open and Distance Learning in Developing Countries project was designed to determine awareness and use of educational technologies and communications media in developing countries, to identify factors constraining wider use of educational technologies by developing nations, and to explore…

14 CFR Appendix A to Subpart U of... - GCNP Quiet Aircraft Technology Designation

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false GCNP Quiet Aircraft Technology Designation... to Subpart U of Part 93—GCNP Quiet Aircraft Technology Designation This appendix contains procedures for determining the GCNP quiet aircraft technology designation status for each aircraft subject to...

Technology from the Perspective of Society and Public Interest

ERIC Educational Resources Information Center

Park, Chanwoon

2017-01-01

The ultimate goals of this study were to determine ways to reconcile technology with public interest and to understand the relationship between what we know and how we feel about technology. To achieve the goals, related literatures were reviewed; the mechanism of technology development was described with empirical data; and human perception of…

The DeKalb High Technology Needs Assessment for Gifted Students.

ERIC Educational Resources Information Center

Johnson, Berman E.

A study was conducted by DeKalb Area Vocational-Technical School (DAVTS) to determine the attitudes of gifted high school students toward high technology as a choice for postsecondary studies and their interest in joint enrollment in DATVS's high technology programs. A student questionnaire, information on DATVS high technology programs, and a…

Motivation in Technology Education among Novice and Technological Talents

ERIC Educational Resources Information Center

Autio, Ossi

2010-01-01

The purpose of this study was to determine the elements motivating comprehensive school students to study technology education. The research was carried out as a qualitative case study and the material was collected through individual theme interviews. The study group consisted of two different test groups: novice and technological talents. In…

Embedding Entrepreneurs in Improving The Skills Of Entrepreneurs of Technology-Based Vocational School In Indonesia

NASA Astrophysics Data System (ADS)

Imam Agung, Achmad; Mukhadis, Amat; Sutadji, Eddy; Purnomo

2018-04-01

This study aims to identify the characteristics of entrepreneurship/entrepreneurial potential-based technology, for in order to develop the traits of an entrepreneur-based technology in Indonesia in general and Surabaya in particular. This specification aims to: 1) determine the profile of the socio-demographic and entrepreneur of technology experts (technopreneur), technology developers and students; 5) determine the need for the skills of an entrepreneur-based technology; and 3) recommend actions that will improve the skills of technology-based entrepreneurship. This study is a small study, the type of this research is research and development with a quantitative approach, whereas the respondents as the following: taken random participants 5 technology developers, 5 entrepreneurs of technology-based, and the students 10 of the vocational school in Surabaya . A tool of descriptive statistics (i.e., count the frequency, tools and analysis cross-tabular) is used to analyze the data. Score the competence of the entrepreneur personally from the respondents was also determined. Analysis of variance (ANOVA) and analysis of T-test is further used to determine the significance of differences in average values between the nature of the Competence of the entrepreneur personal in between the groups of respondents are different. The results showed that the entrepreneurial technology-based and students are significantly different from the experts of today’s technology in search of opportunities, risk-taking and self-confidence. The need for the development of entrepreneurship skill-based technopreneur. Shortcomings search of opportunity, self-confidence, risk taking, networking and negotiation and an essential characteristic of the Competence of the entrepreneur and another private between the developer and the students should be addressed by a special program and training program in the future and/or courses and programs were instituted in entrepreneurship. Components of the training and business/technical of the project can consider the traits that should be improved among developers and students; it becomes the need of the skills of the entrepreneur-based technology to the future. To develop the traits of the Competence of the Entrepreneur’s Personal, competition, training and business seminars, investor forums, the exhibition and the exhibition of technology-based products and should be followed on a regular basis. These activities can be coordinated by the Ministry of Cooperatives and SMES, training centres and technology entrepreneur better it states or private. In addition, the activities of the clinic and assisting the business in coordination with the department of management and other related

U.S.A.B.I.L.I.T.Y. Framework for Older Adults.

PubMed

Caboral-Stevens, Meriam; Whetsell, Martha V; Evangelista, Lorraine S; Cypress, Brigitte; Nickitas, Donna

2015-01-01

The purpose of the current study was to present a framework to determine potential usability of health websites by older adults. Review of the literature showed paucity of nursing theory related to the use of technology and usability, particularly in older adults. The Roy Adaptation Model, a widely used nursing theory, was chosen to provide framework for the new model. Technology constructs from the Technology Acceptance Model and United Theory of Acceptance and Use of Technology and behavioral control construct from the Theory of Planned Behavior were integrated into the construction of the derived model. The Use of Technology for Adaptation by Older Adults and/or Those With Limited Literacy (U.S.A.B.I.L.I.T.Y.) Model was constructed from the integration of diverse theoretical/conceptual perspectives. The four determinants of usability in the conceptual model include (a) efficiency, (b) learnability, (c) perceived user experience, and (d) perceived control. Because of the lack of well-validated survey questionnaires to measure these determinants, a U.S.A.B.I.L.I.T.Y. Survey was developed. A panel of experts evaluated face and content validity of the new instrument. Internal consistency of the new instrument was 0.96. Usability is key to accepting technology. The derived U.S.A.B.I.L.I.T.Y. framework could serve as a guide for nurses in formative evaluation of technology. Copyright 2015, SLACK Incorporated.

Across the Great Divide: The Effects of Technology in Secondary Biology Classrooms

NASA Astrophysics Data System (ADS)

Worley, Johnny Howard, II

This study investigates the relationship between technology use and student achievement in public high school across North Carolina. The purpose of this study was to determine whether a digital divide (differences in technology utilization based on student demographics of race/ethnicity, gender, socioeconomic status, and municipality) exists among schools and whether those differences relate to student achievement in high school biology classrooms. The study uses North Carolina end-of-course (EOC) data for biology to analyze student demographic data and assessment results from the 2010-2011 school year from the North Carolina Department of Public Instruction. The data analyses use descriptive and factorial univariate statistics to determine the existence of digital divides and their effects on biology achievement. Analysis of these data described patterns of technology use to determine whether potential variances resulted in a digital divide. Specific technology uses were identified in the data and then their impact on biology achievement scores within various demographic groups was examined. Research findings revealed statistically significant variations of use within different population groups. Despite being statistically significant, the relevance of the association in the variations was minimal at best -- based on the effect scale established by Cohen (1988). Additional factorial univariate analyses were employed to determine potential relationships between technology use and student achievement. The data revealed that technology use did not influence the variation of student achievement scale scores as much as race/ethnicity and socioeconomic status. White students outperformed Hispanic students by an average of three scale score points and Black students by an average of six scale score points. Technology use alone averaged less than a one point difference in mean scale scores, and only when interacting with race, gender, and/or SES did the mean difference increase. However, this increase within the context of the biology scale score range was negligible. This study contributes to the existing body of research on the effects of technology use on student achievement and its influence within various student demographic groups and municipalities. The study also provides additional research information for effective technology utilization, implementation, and instruction in educational environments.

The Inertial Stellar Compass (ISC): A Multifunction, Low Power, Attitude Determination Technology Breakthrough

NASA Technical Reports Server (NTRS)

Bauer, Frank H. (Technical Monitor); Dennehy, Neil; Gambino, Joel; Maynard, Andrew; Brady, T.; Buckley, S.; Zinchuk, J.

2003-01-01

The Inertial Stellar Compass (ISC) is a miniature, low power, stellar inertial attitude determination system with an accuracy of better than 0.1 degree (1 sigma) in three axes. The ISC consumes only 3.5 Watts of power and is contained in a 2.5 kg package. With its embedded on-board processor, the ISC provides attitude quaternion information and has Lost-in-Space (LIS) initialization capability. The attitude accuracy and LIS capability are provided by combining a wide field of view Active Pixel Sensor (APS) star camera and Micro- ElectroMechanical System (MEMS) inertial sensor information in an integrated sensor system. The performance and small form factor make the ISC a useful sensor for a wide range of missions. In particular, the ISC represents an enabling, fully integrated, micro-satellite attitude determination system. Other applications include using the ISC as a single sensor solution for attitude determination on medium performance spacecraft and as a bolt on independent safe-hold sensor or coarse acquisition sensor for many other spacecraft. NASA's New Millennium Program (NMP) has selected the ISC technology for a Space Technology 6 (ST6) flight validation experiment scheduled for 2004. NMP missions, such a s ST6, are intended to validate advanced technologies that have not flown in space in order to reduce the risk associated with their infusion into future NASA missions. This paper describes the design, operation, and performance of the ISC and outlines the technology validation plan. A number of mission applications for the ISC technology are highlighted, both for the baseline ST6 ISC configuration and more ambitious applications where ISC hardware and software modifications would be required. These applications demonstrate the wide range of Space and Earth Science missions that would benefit from infusion of the ISC technology.

Potential Use of Augmented Reality in LIS Education

ERIC Educational Resources Information Center

Wójcik, Magdalena

2016-01-01

The subject of this article is the use of augmented reality technology in library and information science education. The aim is to determine the scope and potential uses of augmented reality in the education of information professionals. In order to determine the scope and forms of potential use of AR technology in LIS education a two-step…

Examining the Antecedents of ICT Adoption in Education Using an Extended Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Teeroovengadum, Viraiyan; Heeraman, Nabeel; Jugurnath, Bhavish

2017-01-01

This study assesses the determinants of ICT adoption by educators in the teaching and learning process in the context of a developing country, Mauritius. A hierarchical regression analysis is used, to firstly determine the incremental effects of factors from the technology acceptance model (TAM) while controlling for demographic variables such as…

Determinants of Adoption of Improved Fish Production Technologies among Fish Farmers in Delta State, Nigeria

ERIC Educational Resources Information Center

Ofuoku, A. U.; Olele, N. F.; Emah, G. N.

2008-01-01

This study was conducted to isolate the determinants of improved fish production technologies in Delta State, Nigeria. Data were collected from a sample population of 250 fish farmers from ten randomly selected Local Government Areas of Delta State. The data were elicited from respondents with the use of structured interview schedule while…

The Role of Self-Determination Theory in Explaining Teachers' Motivation to Continue to Use E-Learning Technology

ERIC Educational Resources Information Center

Sorebo, Oystein; Halvari, Hallgier; Gulli, Vebjorn Flaata; Kristiansen, Roar

2009-01-01

Based on self-determination theory, this study proposes an extended information systems continuance theory in the context of teachers' utilization of e-learning technology in connection with on-site courses. In the proposed model teachers' extrinsic motivation (i.e. perceived usefulness), confirmation of pre-acceptance expectations and intrinsic…

Evaluation of Arsenic Removal Technology: Arsenic Demonstration Program

EPA Science Inventory

Specific objectives of this program are to evaluate the reliability of the arsenic technologies of small scale systems; to gauge the simplicity of system operations, maintenance and operator skill; to determine the cost-effectiveness of the treatment technologies; and to characte...

CHOL-N-SOIL PCB TEST KIT, DEXSIL CORP. - INNOVATIVE TECHNOLOGY Evaluation REPORT

EPA Science Inventory

This innovative technology evaluation report (ITER) presents the evaluation of two field screening technologies for determining polychlorinated biphenyl (PCB) contamination in soil. The demonstration was conducted by PRC Environmental Management, Inc. (PRC), under contract to the...

15 CFR 1160.23 - Assistance in establishing Strategic Partnerships.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Trade (Continued) TECHNOLOGY ADMINISTRATION, DEPARTMENT OF COMMERCE PRODUCTIVITY, TECHNOLOGY AND... the requester, Commerce will determine which industries have a stake in the technology, invite the firms from those industries, and design the meeting agenda and background materials. Anyone wishing to...

TECHNOLOGY TRANSFER ENVIRONMENTAL REGULATIONS AND TECHNOLOGY : CONTROL OF PATHOGENS IN MUNICIPAL WASTEWATER SLUDGE

EPA Science Inventory

This 71 - page Technology Transfer Environmental Regulations and echnology publication describes the Federal requirements promulgated in 1979 for reducing pathogens n wastewater sludge and provides guidance in determining whether individual sludge treatment andated or particular ...

7 CFR 2.24 - Assistant Secretary for Administration.

Code of Federal Regulations, 2013 CFR

2013-01-01

... determining whether to continue, modify, or terminate an information technology program or project. (iii... technology to improve productivity in the Department. (P) Plan, develop, install, and operate computer-based systems for message exchange, scheduling, computer conferencing, televideo technologies, and other...

Bridging the Divide: Using UTAUT to predict multigenerational tablet adoption practices.

PubMed

Magsamen-Conrad, Kate; Upadhyaya, Shrinkhala; Joa, Claire Youngnyo; Dowd, John

2015-09-01

This study examined the "Unified Theory of Acceptance and Use of Technology" (UTAUT) in the context of tablet devices across multiple generations. We tested the four UTAUT determinants, performance expectancy, effort expectancy, social influence, and facilitating conditions, to determine their contributions for predicting behavioral intention to use tablets with age, gender, and user experience as moderators. 899 respondents aged 19-99 completed the survey. We found consistent generational differences in UTAUT determinants, most frequently between the oldest and youngest generations. Effort expectancy and facilitating conditions were the only determinants that positively predicted tablet use intentions after controlling for age, gender, and tablet use. We also discuss the implications of ageism and gender discrimination of technology adoption. Finally, we argue that our findings can be extended to create effective training programs for the teaching, learning, and adoption of new technologies in a variety of organizational settings.

What next after determinism in the ontology of technology? Distributing responsibility in the biofuel debate.

PubMed

Boucher, Philip

2011-09-01

This article builds upon previous discussion of social and technical determinisms as implicit positions in the biofuel debate. To ensure these debates are balanced, it has been suggested that they should be designed to contain a variety of deterministic positions. Whilst it is agreed that determinism does not feature strongly in contemporary academic literatures, it is found that they have generally been superseded by an absence of any substantive conceptualisation of how the social shaping of technology may be related to, or occur alongside, an objective or autonomous reality. The problem of determinism emerges at an ontological level and must be resolved in situ. A critical realist approach to technology is presented which may provide a more appropriate framework for debate. In dialogue with previous discussion, the distribution of responsibility is revisited with reference to the role of scientists and engineers.

Concepts for fast acquisition in optical communications systems

NASA Astrophysics Data System (ADS)

Wilkerson, Brandon L.; Giggenbach, Dirk; Epple, Bernhard

2006-09-01

As free-space laser communications systems proliferate due to improved technology and transmission techniques, optical communication networks comprised of ground stations, aircraft, high altitude platforms, and satellites become an attainable goal. An important consideration for optical networks is the ability of optical communication terminals (OCT) to quickly locate one another and align their laser beams to initiate the acquisition sequence. This paper investigates promising low-cost technologies and novel approaches that will facilitate the targeting and acquisition tasks between counter terminals. Specifically, two critical technology areas are investigated: position determination (which includes location and attitude determination) and inter-terminal communications. A feasibility study identified multiple-antenna global navigation satellite system (GNSS) systems and GNSS-aided inertial systems as possible position determination solutions. Personal satellite communication systems (e.g. Iridium or Inmarsat), third generation cellular technology (IMT-2000/UMTS), and a relatively new air traffic surveillance technology called Autonomous Dependent Surveillance-Broadcast (ADS-B) were identified as possible inter-terminal communication solutions. A GNSS-aided inertial system and an ADS-B system were integrated into an OCT to demonstrate their utility in a typical optical communication scenario. Testing showed that these technologies have high potential in future OCTs, although improvements can be made to both to increase tracking accuracy.

Does Social Capital Matter? A Quantitative Approach to Examining Technology Infusion in Schools

ERIC Educational Resources Information Center

Li, S. C.; Choi, T. H.

2014-01-01

Changing teachers' perceptions about the value of technology and equipping them with appropriate knowledge and skills in pedagogical use of technology is often regarded as a key determinant of success in technology infusion in schools. However, recent studies have indicated that changing teachers' epistemological beliefs about the use of…

48 CFR 25.703-3 - Prohibition on contracting with entities that export sensitive technology to Iran.

Code of Federal Regulations, 2013 CFR

2013-10-01

... with entities that export sensitive technology to Iran. 25.703-3 Section 25.703-3 Federal Acquisition... Sources 25.703-3 Prohibition on contracting with entities that export sensitive technology to Iran. (a... or services with a person that exports certain sensitive technology to Iran, as determined by the...

48 CFR 25.703-3 - Prohibition on contracting with entities that export sensitive technology to Iran.

Code of Federal Regulations, 2014 CFR

2014-10-01

... with entities that export sensitive technology to Iran. 25.703-3 Section 25.703-3 Federal Acquisition... Sources 25.703-3 Prohibition on contracting with entities that export sensitive technology to Iran. (a... or services with a person that exports certain sensitive technology to Iran, as determined by the...

Exploring Teacher Pedagogy, Stages of Concern and Accessibility as Determinants of Technology Adoption

ERIC Educational Resources Information Center

Burke, Paul F.; Schuck, Sandy; Aubusson, Peter; Kearney, Matthew; Frischknecht, Bart

2018-01-01

This research examines how the pedagogical orientations of teachers affect technology adoption in the classroom. At the same time, the authors account for the stage of concern that teachers are experiencing regarding the use of the technology, their access to the technology and the level of schooling at which they teach.The authors' investigation…

Basic Technology Competencies, Attitude towards Computer Assisted Education and Usage of Technologies in Turkish Lesson: A Correlation

ERIC Educational Resources Information Center

Özdemir, Serpil

2017-01-01

The present research was done to determine the basic technology competency of Turkish teachers, their attitude towards computer-assisted education, and their technology operation level in Turkish lessons, and to designate the relationship between them. 85 Turkish teachers studying in public schools in Bartin participated in the research. The…

Evaluating the Potential of Teacher-Designed Technology-Based Tasks for Meaningful Learning: Identifying Needs for Professional Development

ERIC Educational Resources Information Center

George, Ann; Sanders, Martie

2017-01-01

With technology increasingly being introduced into classrooms worldwide, stakeholders are asking whether ICT provides educational value. It is not simply having access to technology but how teachers use it that will determine its worth to education. Thirty-three teacher-designed technology-based tasks from eight subject areas were analysed for…

Playing with Technology: Is It All Bad?

ERIC Educational Resources Information Center

Slutsky, Ruslan; Slutsky, Mindy; DeShelter, Lori M.

2014-01-01

Technology now plays a very large role in the way children of all ages play. Children want access to technology, so parents and teachers must determine the best ways to present it to them. Computers are a popular form of technology for children as young as age three. With that in mind, computer games should be problem-solving oriented and…

Predicting the Use of Instructional Technology among Community College Instructors: An Extension of the Technology Acceptance Model (TAM)

ERIC Educational Resources Information Center

Miller, Emma Rebecca

2017-01-01

The purpose of this study was to determine what variables predict the use of instructional technology among community college instructors. Legislators, community college administrators, and students expect innovative lessons from instructors that use technology. This study addresses the problem of not knowing what predicts instructional technology…

The Effect of Creative Drama on Student Achievement in the Course of Information Technologies

ERIC Educational Resources Information Center

Özek, Müzeyyen Bulut

2016-01-01

The purpose of this study is to determine the effect of creative drama on student achievement in the Information Technologies course. The study was carried out for the unit "Tomorrow's Technology" which is the first unit of Information Technologies course. For this study, 89 sixth grade students were selected from primary school in…

Legal Barriers to Educational Technology and Instructional Productivity. Final Report.

ERIC Educational Resources Information Center

Heinich, Robert; Ebert, Kim

A study sought to determine if deterrents to the introduction of certain kinds of educational technology were statutory in nature. The thesis was advanced that educational technology is a threat to the power base of education and the more comprehensive the technology, the greater the threat; therefore the laws and policies setting forth the…

A Dataset of Factors That Influence Preservice Teachers' Intentions to Use Web 2.0 Technologies in Future Teaching Practices

ERIC Educational Resources Information Center

Yusop, Farrah Dina

2015-01-01

In recent years, researchers have focused on investigating factors that influence preservice teachers' utilization of Web 2.0 technologies in their classrooms. Findings indicate that preservice teachers' intentions, beliefs and attitudes toward technology are important determinants of the success of future technology integration. However, studies…

Relating Administrators' Training in Technology Integration and Their Attitudes toward Technology in Southeastern Virginia Schools

ERIC Educational Resources Information Center

Martin, Abbie Nicole

2016-01-01

The purpose of the study was to determine if there is a relationship between amount of training administrators receive in technology integration and their attitudes toward technology. Previous research has revealed a relationship between teachers' attitudes (Shiue, 2007; Shoffner, 2009), training (Adcock, 2008; Donnell, 2009; Lei, 2009; Sadik,…

Implementation Costs for Educational Technology Systems. Issue Trak: A CEFPI Brief on Educational Facility Issues.

ERIC Educational Resources Information Center

Meeks, Glenn E.; Fisher, Ricki; Loveless, Warren

Personnel involved in planning or developing schools lack the costing tools that will enable them to determine educational technology costs. This report presents an overview of the technology costing process and the general costs used in estimating educational technology systems on a macro-budget basis, along with simple cost estimates for…

Family Consumer Sciences Teachers' Use of Technology to Teach Higher Order Thinking Skills

ERIC Educational Resources Information Center

Hirose, Beth Erica

2009-01-01

Family and consumer sciences (FACS) high school teachers were surveyed on their use of technology to teach higher order thinking skills (HOTS). This study determined if teachers had enough support and training to use technology. Lesson plans were accumulated that required both technology and higher order thinking skills. These lessons were then…

78 FR 33440 - Importer of Controlled Substances, Notice of Registration; Rhodes Technologies

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-04

... Registration; Rhodes Technologies By a Notice dated April 10, 2013, and published in the Federal Register on April 19, 2013, 78 FR 23594, Rhodes Technologies, 498 Washington Street, Coventry, Rhode Island 02816... factors in 21 U.S.C. 823(a) and 952(a), and determined that the registration of Rhodes Technologies to...

River Protection Project Technology and Innovation Roadmap.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reid, D. S.; Wooley, T. A.; Kelly, S. E.

The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

Independent Assessment of Technology Characterizations to Support the Biomass Program Annual State-of-Technology Assessments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yeh, B.

2011-03-01

This report discusses an investigation that addressed two thermochemical conversion pathways for the production of liquid fuels and addressed the steps to the process, the technology providers, a method for determining the state of technology and a tool to continuously assess the state of technology. This report summarizes the findings of the investigation as well as recommendations for improvements for future studies.

Educational technology for millennial dental hygiene students: a survey of U.S. dental hygiene programs.

PubMed

Beebe, Catherine R R; Gurenlian, JoAnn R; Rogo, Ellen J

2014-06-01

A growing body of literature suggests that today's learners have changed and education must change as well since Millennial generation students expect technology to be used in their coursework. This study sought to determine what educational technology is being used in U.S. dental hygiene programs, what student and faculty perceptions are of the effectiveness of technology, and what barriers exist to implementing educational technology. A stratified random sample of 120 entry-level dental hygiene programs nationwide were invited to participate in a survey. Fourteen programs participated, yielding a pool of 415 potential individual participants; out of those, eighty-four student and thirty-eight faculty respondents were included in the analysis, a total of 122. Results were analyzed using descriptive statistics and a Mann-Whitney U test (p<0.05). Faculty and student respondents agreed on the effectiveness of educational technology in all areas except clickers and wikis. The faculty members tended to rate the effectiveness of educational technology higher than did the students. The greatest perceived barrier to implementing technology was technical difficulties. This study suggests that support services should be available to faculty and students to ensure successful implementation of technology. Dental hygiene educators have adopted many types of educational technology, but more data are needed to determine best practices.

Income and Technology as Drivers of Australian Healthcare Expenditures.

PubMed

You, Xiaohui; Okunade, Albert A

2017-07-01

The roles of income and technology as the major determinants of aggregate healthcare expenditure (HEXP) continue to interest economists and health policy researchers. Concepts and measures of medical technologies remain complex; however, income (on the demand side) and technology (on the supply side) are important drivers of HEXP. This paper presents analysis of Australia's HEXP, using time-series econometrics modeling techniques applied to 1971-2011 annual aggregate data. Our work fills two important gaps in the literature. First, we model the determinants of Australia's HEXP using the latest and longest available data series. Second, this novel study investigates several alternative technology proxies (input and output measures), including economy-wide research and development expenditures, hospital research expenditures, mortality rate, and two technology indexes based on medical devices. We then apply the residual component method and the technology proxy approach to quantify the technology effects on HEXP. Our empirical results suggest that Australian aggregate healthcare is a normal good and a technical necessity with the income elasticity estimates ranging from 0.51 to 0.97, depending on the model. The estimated technology effects on HEXP falling in the 0.30-0.35 range and mimicking those in the literature using the US data, reinforce the global spread of healthcare technology. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Technology Acceptance Model for Wireless Internet.

ERIC Educational Resources Information Center

Lu, June; Yu, Chun-Sheng; Liu, Chang; Yao, James E.

2003-01-01

Develops a technology acceptance model (TAM) for wireless Internet via mobile devices (WIMD) and proposes that constructs, such as individual differences, technology complexity, facilitating conditions, social influences, and wireless trust environment determine user-perceived short and long-term usefulness, and ease of using WIMD. Twelve…

32 CFR 2400.9 - Classification requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

....9 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY... unauthorized disclosure as determined by the Director, Office of Science and Technology Policy. Each such...

32 CFR 2400.9 - Classification requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

....9 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY... unauthorized disclosure as determined by the Director, Office of Science and Technology Policy. Each such...

32 CFR 2400.9 - Classification requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

....9 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY... unauthorized disclosure as determined by the Director, Office of Science and Technology Policy. Each such...

32 CFR 2400.9 - Classification requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

....9 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY... unauthorized disclosure as determined by the Director, Office of Science and Technology Policy. Each such...

32 CFR 2400.9 - Classification requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

....9 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY... unauthorized disclosure as determined by the Director, Office of Science and Technology Policy. Each such...

Flight Experiments for Living With a Star Space Environment Testbed (LWS-SET): Relationship to Technology

NASA Technical Reports Server (NTRS)

LaBel, Kenneth A.; Barth, Janet L.; Brewer, Dana A.

2003-01-01

This viewgraph presentation provides information on flight validation experiments for technologies to determine solar effects. The experiments are intended to demonstrate tolerance to a solar variant environment. The technologies tested are microelectronics, photonics, materials, and sensors.

Increasing the availability of threonine, isoleucine, valine, and leucine relative to lysine while maintaining an ideal ratio of lysine:methionine alters mammary cellular metabolites, mammalian target of rapamycin signaling, and gene transcription.

PubMed

Dong, X; Zhou, Z; Wang, L; Saremi, B; Helmbrecht, A; Wang, Z; Loor, J J

2018-06-01

Amino acids not only serve as precursors for protein synthesis but also function as signaling molecules that can regulate the mammalian target of rapamycin (mTOR) pathway. Methionine and Lys are the most-limiting AA for milk production and a ratio of ∼3:1 Lys:Met in the metabolizable protein has been determined to be ideal. Besides Met and Lys, recent studies have evaluated Ile, Leu, Val, and Thr as potentially limiting for milk protein synthesis. The objective of this experiment was to determine if varying the ratio of Lys:Thr, Lys:Ile, Lys:Val, and Lys:Leu while maintaining an ideal ratio of Lys:Met and fixed ratio of other essential AA (IPAA) elicits changes in intracellular metabolites, gene transcription related to protein synthesis, and phosphorylation status of mTOR pathway proteins. Immortalized bovine mammary epithelial cell line (MAC-T) cells were incubated for 12 h (n = 5 replicates/treatment) with IPAA (2.9:1 Lys:Met; 1.8:1 Lys:Thr; 2.38:1 Lys:His; 1.23:1 Lys:Val; 1.45:1 Lys:Ile; 0.85:1 Lys:Leu; 2.08:1 Lys:Arg) or IPAA supplemented with Thr, Ile, Val, and Leu to achieve a Lys:Thr 1.3:1 (LT1.3), Lys:Ile 1.29:1 (LI1.29), Lys:Val 1.12:1 (LV1.12), or Lys:Leu 0.78:1 (LL0.78). Compared with IPAA, metabolomics via gas chromatography-mass spectrometry revealed that increases in availability of Thr, Ile, Val, and Leu led to greater concentrations of essential AA (Leu, Ile, Thr), nonessential AA (Gly, Glu, Gln, Ser, Pro, Asp), and various metabolites including uric acid, phosphoric acid, N-acetylglutamic acid, and intermediates of glycolysis and the tricarboxylic acid cycle. Compared with other treatments, LV1.12 led to greater phosphorylation status of serine/threonine kinase B (Akt), mTORC1, and ribosomal protein S6 and lower phosphorylation of α subunit of eukaryotic translation initiation factor 2. In addition, LV1.12 upregulated abundance of CSN2 and both the abundance and promoter methylation of CSN1S1. Although LI1.29 led to the second highest response in mTORC1 phosphorylation status, it resulted in the lowest phosphorylation of Akt and eEF2 and mRNA abundance of CSN2 and various AA transporters (SLC7A5, SLC36A1, SLC38A2, SLC38A9, SLC43A1). Overall, data indicate that an increase in Val at an ideal ratio of Lys:Met could further enhance milk protein synthesis by altering intracellular concentrations of essential AA and metabolites that could play a regulatory role, increasing phosphorylation status of mTORC1 and key signaling proteins, and upregulation of AA transporters. The Authors. Published by FASS Inc. and Elsevier Inc. on behalf of the American Dairy Science Association®. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/3.0/).

Determinants of Change in the Cost-effectiveness Threshold.

PubMed

Paulden, Mike; O'Mahony, James; McCabe, Christopher

2017-02-01

The cost-effectiveness threshold in health care systems with a constrained budget should be determined by the cost-effectiveness of displacing health care services to fund new interventions. Using comparative statics, we review some potential determinants of the threshold, including the budget for health care, the demand for existing health care interventions, the technical efficiency of existing interventions, and the development of new health technologies. We consider the anticipated direction of impact that would affect the threshold following a change in each of these determinants. Where the health care system is technically efficient, an increase in the health care budget unambiguously raises the threshold, whereas an increase in the demand for existing, non-marginal health interventions unambiguously lowers the threshold. Improvements in the technical efficiency of existing interventions may raise or lower the threshold, depending on the cause of the improvement in efficiency, whether the intervention is already funded, and, if so, whether it is marginal. New technologies may also raise or lower the threshold, depending on whether the new technology is a substitute for an existing technology and, again, whether the existing technology is marginal. Our analysis permits health economists and decision makers to assess if and in what direction the threshold may change over time. This matters, as threshold changes impact the cost-effectiveness of interventions that require decisions now but have costs and effects that fall in future periods.

Physician attitudes regarding pregnancy, fertility care, and assisted reproductive technologies for HIV-infected individuals and couples.

PubMed

Yudin, Mark H; Money, Deborah M; Cheung, Matthew C; Loutfy, Mona R

2012-01-01

Family and pregnancy planning are important for HIV-infected individuals and couples. There is a paucity of data regarding physician attitudes with respect to reproduction in this population, but some evidence suggests that attitudes can influence the information, advice, and services they will provide. To determine physician attitudes toward pregnancy, fertility care, and access to assisted reproductive technologies for HIV-infected individuals, and to determine whether attitudes differed based on specific physician characteristics. A survey was sent electronically to obstetrician/gynecologists and infectious disease specialists in Canada. Items were grouped into 5 key domains: physician demographics, physician attitudes toward pregnancy and adoption, physician attitudes toward fertility care, physician attitudes toward assisted reproductive technology, and challenges for an HIV-infected population. Attitudes were determined based on answers to individual questions and also for each domain. Univariate and logistic regression analyses were used to determine the influence of specific physician characteristics on attitudes. Completed surveys were received from 165 physicians. Most had positive attitudes regarding pregnancy or adoption (89%), fertility care (72%), and assisted reproductive technology (79%). In multivariate analyses, having cared for HIV-infected patients was significantly associated with having a positive attitude toward fertility care or assisted reproductive technology. In this national survey of Canadian physicians, most had positive attitudes toward pregnancy, adoption, fertility care, and use of assisted reproductive technology among HIV-infected persons. Physicians who had cared for HIV-infected individuals in the past were more likely to have positive attitudes than those who had not.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, H.R.; Overbey, W.K. Jr.; Koperna, G.J. Jr.

The purpose of this study is to assess the state-of-the-art of excavation technology as related to environmental remediation applications. A further purpose is to determine which of the excavation technologies reviewed could be used by the US Corp of Engineers in remediating contaminated soil to be excavated in the near future for construction of a new Lock and Dam at Winfield, WV. The study is designed to identify excavation methodologies and equipment which can be used at any environmental remediation site but more specifically at the Winfield site on the Kanawha River in Putnam County, West Virginia. A technical approachmore » was determined whereby a functional analysis was prepared to determine the functions to be conducted during the excavation phase of the remediation operations. A number of excavation technologies were identified from the literature. A set of screening criteria was developed that would examine the utility and ranking of the technologies with respect to the operations that needed to be conducted at the Winfield site. These criteria were performance, reliability, implementability, environmental safety, public health, and legal and regulatory compliance. The Loose Bulk excavation technology was ranked as the best technology applicable to the Winfield site. The literature was also examined to determine the success of various methods of controlling fugitive dust. Depending upon any changes in the results of chemical analyses, or prior remediation of the VOCs from the vadose zone, consideration should be given to testing a new ``Pneumatic Excavator`` which removes the VOCs liberated during the excavation process as they outgas from the soil. This equipment however would not be needed on locations with low levels of VOC emissions.« less

Estimating suspended sediment using acoustics in a fine-grained riverine system, Kickapoo Creek at Bloomington, Illinois

USGS Publications Warehouse

Manaster, Amanda D.; Domanski, Marian M.; Straub, Timothy D.; Boldt, Justin A.

2016-08-18

Acoustic technologies have the potential to be used as a surrogate for measuring suspended-sediment concentration (SSC). This potential was examined in a fine-grained (97-100 percent fines) riverine system in central Illinois by way of installation of an acoustic instrument. Acoustic data were collected continuously over the span of 5.5 years. Acoustic parameters were regressed against SSC data to determine the accuracy of using acoustic technology as a surrogate for measuring SSC in a fine-grained riverine system. The resulting regressions for SSC and sediment acoustic parameters had coefficients of determination ranging from 0.75 to 0.97 for various events and configurations. The overall Nash-Sutcliffe model-fit efficiency was 0.95 for the 132 observed and predicted SSC values determined using the sediment acoustic parameter regressions. The study of using acoustic technologies as a surrogate for measuring SSC in fine-grained riverine systems is ongoing. The results at this site are promising in the realm of surrogate technology.

1998 IEEE Aerospace Conference. Proceedings.

NASA Astrophysics Data System (ADS)

The following topics were covered: science frontiers and aerospace; flight systems technologies; spacecraft attitude determination and control; space power systems; smart structures and dynamics; military avionics; electronic packaging; MEMS; hyperspectral remote sensing for GVP; space laser technology; pointing, control, tracking and stabilization technologies; payload support technologies; protection technologies; 21st century space mission management and design; aircraft flight testing; aerospace test and evaluation; small satellites and enabling technologies; systems design optimisation; advanced launch vehicles; GPS applications and technologies; antennas and radar; software and systems engineering; scalable systems; communications; target tracking applications; remote sensing; advanced sensors; and optoelectronics.

NIH Common Fund - Disruptive Proteomics Technologies - Challenges and Opportunities | Office of Cancer Clinical Proteomics Research

Cancer.gov

This Request for Information (RFI) is directed toward determining how best to accelerate research in disruptive proteomics technologies. The Disruptive Proteomics Technologies (DPT) Working Group of the NIH Common Fund wishes to identify gaps and opportunities in current technologies and methodologies related to proteome-wide measurements.  For the purposes of this RFI, “disruptive” is defined as very rapid, very significant gains, similar to the "disruptive" technology development that occurred in DNA sequencing technology.

A forecast of broadcast satellite communications

NASA Technical Reports Server (NTRS)

Martino, J. P.; Lenz, R. C., Jr.

1977-01-01

This paper presents forecasts of likely changes in broadcast satellite technology, the technology of ground terminals, and the technology of terrestrial communications competitive with satellites. The impacts of these changes in technology are then assessed, using a cross-impact model of U.S. domestic telecommunications, to determine the consequences of various possible changes in communications satellite technology. These consequences are discussed in terms of various possible services, for households, businesses, and specialized customers, which might become economically viable as a result of improvements in satellite technology.

Determinants of Girls' Performance in Science, Mathematics and Technology Subjects in Public Secondary Schools in Kenya

ERIC Educational Resources Information Center

Musau, Lydia Mbaki; Migosi, Joash; Muola, James Matee

2013-01-01

There has been incessant low academic performance in Science, Mathematics and Technology (SMT) subjects especially among girls at form four level in Kitui Central District over the years. The aim of this study was to investigate the determinants of girls' performance in SMT subjects in public secondary schools. Using ex-post-facto survey research…

Laser Scanning Technology as Part of a Comprehensive Condition Assessment for Covered Bridges

Treesearch

Brian K. Brashaw; Samuel Anderson; Robert J. Ross

2015-01-01

New noncontact technologies have been developed and implemented for determining as-built condition and current dimensions for a wide variety of objects and buildings. In this study, a three-dimensional laser scanner was used to determine the dimensions and visual condition of a historic bridge in the Amnicon Falls State Park in northern Wisconsin. 3D scanning provides...

Determinants of the Use of Technological Innovation in Distance Learning: A Study with Business School Instructors

ERIC Educational Resources Information Center

Araujo Leal, Edvalda; Luiz Albertin, Alberto

2015-01-01

This study's overall purpose is to identify the factors determining the use of technological innovation in Distance Learning (DL), as perceived by instructors of Business Education programs. The theoretical basis for the study is the Innovation Diffusion Theory (IDT). The study's sample is made up of 436 instructors; we used a quantitative…

Groundwork: Preparing an Effective Basis for Communication and Shared Learning in Design and Technology Education

ERIC Educational Resources Information Center

Looijenga, Annemarie; Klapwijk, Remke; de Vries, Marc J.

2016-01-01

In Dutch Design and Technology Education the beginning of a process of learning is usually determined by the teacher. In this paper it is argued that a beginning, determined in interaction with the students, is more profitable as the interaction will lead to joined-up exploring, creating and thinking and an increased motivation to learn.…

Determining the Roles of Mentors in the Teachers' Use of Technology: Implementation of Systems-Based Mentoring Model

ERIC Educational Resources Information Center

Gökoglu, Seyfullah; Çakiroglu, Ünal

2017-01-01

The aim of this case study is to evaluate the effect of mentors on teachers' technology integration process into their classrooms. In integration process, interactions between the mentors and the teachers are implemented in terms of Systems-Based Mentoring Model (SBMM). Mentors' leadership roles were determined and changes in teachers' technology…

Scientific and Technological Progress and Job Qualification.

ERIC Educational Resources Information Center

Ivanov, N. P.

Clarifying the influences determining how and to what extent highly qualified personnel are employed, this study discusses those sorts of economic and technological advances affecting employment potentials. Two main trends in scientific and technological progress--computerized industries and the high science-content of production--have so…

Cryogenic Tank Technology Program (CTTP)

NASA Technical Reports Server (NTRS)

Vaughn, T. P.

2001-01-01

The objectives of the Cryogenic Tank Technology Program were to: (1) determine the feasibility and cost effectiveness of near net shape hardware; (2) demonstrate near net shape processes by fabricating large scale-flight quality hardware; and (3) advance state of current weld processing technologies for aluminum lithium alloys.

77 FR 54927 - Notice of Affirmative Determination Regarding Application for Reconsideration

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-06

... WIPRO LIMITED, WIPRO TECHNOLOGIES, ALLIANCE MANAGERS, INCLUDING WORKERS WORKING REMOTELY IN NEW JERSEY, EAST BRUNSWICK, NEW JERSEY TA-W-81,575A WIPRO LIMITED, WIPRO TECHNOLOGIES, ALLIANCE MANAGERS, INCLUDING... TECHNOLOGIES, ALLIANCE MANAGERS, INCLUDING WORKERS WORKING REMOTELY IN CALIFORNIA, MOUNTAIN VIEW, CALIFORNIA TA...

Aligning Technology Education Teaching with Brain Development

ERIC Educational Resources Information Center

Katsioloudis, Petros

2015-01-01

This exploratory study was designed to determine if there is a level of alignment between technology education curriculum and theories of intellectual development. The researcher compared Epstein's Brain Growth Theory and Piaget's Status of Intellectual Development with technology education curriculum from Australia, England, and the United…

40 CFR 142.16 - Special primacy requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... and operating criteria for each filtration treatment technology allowed or a procedure for... technology for source waters of various qualities. (ii) For a State which does not require all public water...) (alternative filtration technologies)—Determine that a public water system has demonstrated that an alternate...

6 CFR 25.5 - Obligations of seller.

Code of Federal Regulations, 2010 CFR

2010-01-01

...-TERRORISM BY FOSTERING EFFECTIVE TECHNOLOGIES § 25.5 Obligations of seller. (a) Liability Insurance Required... Terrorism when Qualified Anti-Terrorism Technologies have been deployed in defense against, response to, or...-Terrorism Technology submit any information that would: (1) Assist in determining the amount of liability...

76 FR 14690 - Manufacturer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-17

... December 3, 2010, (75 FR 75498), Agilent Technologies, 25200 Commercentre Drive, Lake Forest, California... determined that the registration of Agilent Technologies to manufacture the listed basic classes of... Technologies to ensure that the company's registration is consistent with the public interest. The...

Sequencing Computer-Assisted Learning of Transformations of Trigonometric Functions

ERIC Educational Resources Information Center

Ross, John A.; Bruce, Catherine D.; Sibbald, Timothy M.

2011-01-01

Studies incorporating technology into the teaching of trigonometry, although sparse, have demonstrated positive effects on student achievement. The optimal sequence for integrating technology with teacher-led mathematics instruction has not been determined. Our research investigated whether technology has a greater impact on student achievement…

Interplanetary laser ranging - an emerging technology for planetary science missions

NASA Astrophysics Data System (ADS)

Dirkx, D.; Vermeersen, L. L. A.

2012-09-01

Interplanetary laser ranging (ILR) is an emerging technology for very high accuracy distance determination between Earth-based stations and spacecraft or landers at interplanetary distances. It has evolved from laser ranging to Earth-orbiting satellites, modified with active laser transceiver systems at both ends of the link instead of the passive space-based retroreflectors. It has been estimated that this technology can be used for mm- to cm-level accuracy range determination at interplanetary distances [2, 7]. Work is being performed in the ESPaCE project [6] to evaluate in detail the potential and limitations of this technology by means of bottom-up laser link simulation, allowing for a reliable performance estimate from mission architecture and hardware characteristics.

Application of advanced speech technology in manned penetration bombers

NASA Astrophysics Data System (ADS)

North, R.; Lea, W.

1982-03-01

This report documents research on the potential use of speech technology in a manned penetration bomber aircraft (B-52/G and H). The objectives of the project were to analyze the pilot/copilot crewstation tasks over a three-hour-and forty-minute mission and determine the tasks that would benefit the most from conversion to speech recognition/generation, determine the technological feasibility of each of the identified tasks, and prioritize these tasks based on these criteria. Secondary objectives of the program were to enunciate research strategies in the application of speech technologies in airborne environments, and develop guidelines for briefing user commands on the potential of using speech technologies in the cockpit. The results of this study indicated that for the B-52 crewmember, speech recognition would be most beneficial for retrieving chart and procedural data that is contained in the flight manuals. Technological feasibility of these tasks indicated that the checklist and procedural retrieval tasks would be highly feasible for a speech recognition system.

Radiation immune RAM semiconductor technology for the 80's. [Random Access Memory

NASA Technical Reports Server (NTRS)

Hanna, W. A.; Panagos, P.

1983-01-01

This paper presents current and short term future characteristics of RAM semiconductor technologies which were obtained by literature survey and discussions with cognizant Government and industry personnel. In particular, total ionizing dose tolerance and high energy particle susceptibility of the technologies are addressed. Technologies judged compatible with spacecraft applications are ranked to determine the best current and future technology for fast access (less than 60 ns), radiation tolerant RAM.

Predictive Power of Prospective Physical Education Teachers' Attitudes towards Educational Technologies for Their Technological Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Varol, Yaprak Kalemoglu

2015-01-01

The aim of the research is to determine the predictive power of prospective physical education teachers' attitudes towards educational technologies for their technological pedagogical content knowledge. In this study, a relational research model was used on a study group that consisted of 529 (M[subscript age]=21.49, SD=1.44) prospective physical…

The Effect of Instructional Technology and Material Design Course to Teacher Candidates' Gaining of Technological Pedagogical Content Knowledge Competencies

ERIC Educational Resources Information Center

Tozkoparam, Süleyman Burak; Kiliç, Muhammet Emre; Usta, Ertugrul

2015-01-01

The aim of this study is to determine Technological Pedagogical Content Knowledge (TPACK) Competencies of teacher candidates in Turkish Teaching department of Mevlana (Rumi) University and the effect of Instructional Technology and Material Design (ITMD) Course on TPACK. The study is a study of quantitative type and single-group pretest-posttest…

Impact of Increased Technology Use on the Free-Time Choices of Fifth and Seventh Grade Students in a Southern School District

ERIC Educational Resources Information Center

Miller, Cynthia Susan

2009-01-01

The study sought to determine if increased technology use affects the free-time choices of students. While technology options have grown exponentially, time remains a fixed commodity. Therefore, it is suggested that students who increasingly use technology must draw time from more traditional childhood activities. Students' free-time activities…

Perspective: carotid stenting and the history of disruptive technology in vascular surgery.

PubMed

Veith, Frank J

2008-06-01

This article defines disruptive technology and discusses such technologies in Vascular Surgery. It considers the question: Is carotid artery stenting (CAS) a disruptive technology? Although CAS will impact positively on the treatment of carotid bifurcation disease, it will probably never displace carotid endarterectomy in the majority of patients. The precise role of CAS remains to be determined.

Teaching and Learning with Technology in Higher Education: Blended and Distance Education Needs "Joined-up Thinking" Rather than Technological Determinism

ERIC Educational Resources Information Center

Kirkwood, Adrian

2014-01-01

In higher education (HE), some of the distinctions between conventional, campus-based universities and those dedicated to distance education are being eroded through the use of information and communication technology. Despite huge investments in technology to enhance teaching and learning, there has been a considerable lack of clarity about what…

Development of an Instrument to Measure Preservice Teachers' Technology Skills, Technology Beliefs, and Technology Barriers

ERIC Educational Resources Information Center

Brush, Thomas; Glazewski, Krista D.; Hew, Khe Foon

2008-01-01

The purpose of this study was to develop and field-test the Technology Skills, Beliefs, and Barriers scale and to determine its validity and reliability for use with preservice teachers. Data were collected from 176 preservice teachers enrolled in a field-based teacher education program located at a major Southwestern university in the United…

Sand Filter Technology

DTIC Science & Technology

2016-08-01

Approved for public release: distribution unlimited TDS-NAVFAC-EXWC-PW-1604 Aug 2016 Sand Filter Technology This report summarizes the...findings from a demonstration of sand filter technology to determine whether the technology will save energy with a simple payback within the...EXWC) performed the evaluation at the Naval Air Station Lemoore, CA. The two year evaluation period began with one year of sand filter operation

15 CFR 770.3 - Interpretations related to exports of technology and software to destinations in Country Group D:1.

Code of Federal Regulations, 2012 CFR

2012-01-01

... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...

15 CFR 770.3 - Interpretations related to exports of technology and software to destinations in Country Group D:1.

Code of Federal Regulations, 2011 CFR

2011-01-01

... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...

15 CFR 770.3 - Interpretations related to exports of technology and software to destinations in Country Group D:1.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...

15 CFR 770.3 - Interpretations related to exports of technology and software to destinations in Country Group D:1.

Code of Federal Regulations, 2014 CFR

2014-01-01

... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...

15 CFR 770.3 - Interpretations related to exports of technology and software to destinations in Country Group D:1.

Code of Federal Regulations, 2013 CFR

2013-01-01

... technology and software to destinations in Country Group D:1. 770.3 Section 770.3 Commerce and Foreign Trade... technology and software to destinations in Country Group D:1. (a) Introduction. This section is intended to provide you additional guidance on how to determine whether your technology or software would be eligible...

Planning and leading of the technological processes by mechanical working with microsoft project

NASA Astrophysics Data System (ADS)

Nae, I.; Grigore, N.

2016-08-01

Nowadays, fabrication systems and methods are being modified; new processing technologies come up, flow sheets develop a minimum number of phases, the flexibility of the technologies grows up, new methods and instruments of monitoring and leading the processing operations also come up. The technological course (route, entry, scheme, guiding) referring to the series of the operation, putting and execution phases of a mark in order to obtain the final product from the blank is represented by a sequence of activities realized by a logic manner, on a well determined schedule, with a determined budget and resources. Also, a project can be defined as a series of specific activities, methodical structured which they aim to finish a specific objective, within a fixed schedule and budget. Within the homogeneity between the project and the technological course, this research is presenting the defining of the technological course of mechanical chip removing process using Microsoft Project. Under these circumstances, this research highlights the advantages of this method: the celerity using of other technological alternatives in order to pick the optimal process, the job scheduling being constrained by any kinds, the standardization of some processing technological operations.

Structures and materials technology needs for communications and remote sensing spacecraft

NASA Technical Reports Server (NTRS)

Gronet, M. J.; Jensen, G. A.; Hoskins, J. W.

1995-01-01

This report documents trade studies conducted from the perspective of a small spacecraft developer to determine and quantify the structures and structural materials technology development needs for future commercial and NASA small spacecraft to be launched in the period 1999 to 2005. Emphasis is placed on small satellites weighing less than 1800 pounds for two focus low-Earth orbit missions: commercial communications and remote sensing. The focus missions are characterized in terms of orbit, spacecraft size, performance, and design drivers. Small spacecraft program personnel were interviewed to determine their technology needs, and the results are summarized. A systems-analysis approach for quantifying the benefits of inserting advanced state-of-the-art technologies into a current reference, state-of-the-practice small spacecraft design is developed and presented. This approach is employed in a set of abbreviated trade studies to quantify the payoffs of using a subset of 11 advanced technologies selected from the interview results The 11 technology development opportunities are then ranked based on their relative payoff. Based on the strong potential for significant benefits, recommendations are made to pursue development of 8 and the 11 technologies. Other important technology development areas identified are recommended for further study.

Advanced Technology Lifecycle Analysis System (ATLAS) Technology Tool Box (TTB)

NASA Technical Reports Server (NTRS)

Doyle, Monica; ONeil, Daniel A.; Christensen, Carissa B.

2005-01-01

The Advanced Technology Lifecycle Analysis System (ATLAS) is a decision support tool designed to aid program managers and strategic planners in determining how to invest technology research and development dollars. It is an Excel-based modeling package that allows a user to build complex space architectures and evaluate the impact of various technology choices. ATLAS contains system models, cost and operations models, a campaign timeline and a centralized technology database. Technology data for all system models is drawn from a common database, the ATLAS Technology Tool Box (TTB). The TTB provides a comprehensive, architecture-independent technology database that is keyed to current and future timeframes.

32 CFR 250.5 - Procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... judgment that the technical data under consideration disclose critical technology with military or space application. For purposes of making this determination, the Militarily Critical Technologies List (MCTL) shall...

32 CFR 250.5 - Procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... judgment that the technical data under consideration disclose critical technology with military or space application. For purposes of making this determination, the Militarily Critical Technologies List (MCTL) shall...

32 CFR 250.5 - Procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... judgment that the technical data under consideration disclose critical technology with military or space application. For purposes of making this determination, the Militarily Critical Technologies List (MCTL) shall...

32 CFR 250.5 - Procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... judgment that the technical data under consideration disclose critical technology with military or space application. For purposes of making this determination, the Militarily Critical Technologies List (MCTL) shall...

Development of Technology Transfer Economic Growth Metrics

NASA Technical Reports Server (NTRS)

Mastrangelo, Christina M.

1998-01-01

The primary objective of this project is to determine the feasibility of producing technology transfer metrics that answer the question: Do NASA/MSFC technical assistance activities impact economic growth? The data for this project resides in a 7800-record database maintained by Tec-Masters, Incorporated. The technology assistance data results from survey responses from companies and individuals who have interacted with NASA via a Technology Transfer Agreement, or TTA. The goal of this project was to determine if the existing data could provide indications of increased wealth. This work demonstrates that there is evidence that companies that used NASA technology transfer have a higher job growth rate than the rest of the economy. It also shows that the jobs being supported are jobs in higher wage SIC codes, and this indicates improvements in personal wealth. Finally, this work suggests that with correct data, the wealth issue may be addressed.

Determining potential 30/20 GHZ domestic satellite system concepts and establishment of a suitable experimental configuration

NASA Technical Reports Server (NTRS)

Stevens, G. H.; Anzic, G.

1979-01-01

NASA is conducting a series of millimeter wave satellite communication systems and market studies to: (1) determine potential domestic 30/20 GHz satellite concepts and market potential, and (2) establish the requirements for a suitable technology verification payload which, although intended to be modest in capacity, would sufficiently demonstrate key technologies and experimentally address key operational issues. Preliminary results and critical issues of the current contracted effort are described. Also included is a description of a NASA-developed multibeam satellite payload configuration which may be representative of concepts utilized in a technology flight verification program.

Technology and Meteorology. An Action Research Paper.

ERIC Educational Resources Information Center

Taggart, Raymond F.

Meteorology, the science of weather and weather conditions, has traditionally been taught via textbook and rote demonstration. This study was intended to determine to what degree utilizing technology in the study of meteorology improves students' attitudes towards science and to measure to what extent technology in meteorology increases…

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Dennis, William J.; Johnson, Daniel L.; Monroe, Arla K.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. Research findings offered evidence that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of…

Technology Implementation in Education--Identifying Barriers to Fidelity

ERIC Educational Resources Information Center

Monroe, Arla K.; Dennis, William J.; Johnson, Daniel L.

2012-01-01

This report describes a problem-based learning project focused on determining the barriers to the implementation of technological innovations. that properly executed technology implementation is an instructional variable related to student achievement; yet, school district leaders are faced with the problem of recognizing and identifying the…

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

48 CFR 52.250-4 - SAFETY Act Pre-qualification Designation Notice.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (including information technology) or any combination of the foregoing. Design services, consulting services... information, including— (i) A detailed description of and specification for the technology covered by the... Act certification of a technology class that the Department of Homeland Security (DHS) has determined...

Effect of web formation on properties of hydroentangled nonwoven fabrics

USDA-ARS?s Scientific Manuscript database

A study was conducted to determine the effects of two popular web-forming technologies, viz., the Rando air-laid technology and the traditional carding technology, on properties of the hydroentangled nonwoven fabrics made therewith. The fibers used in the study were greige cotton, bleached cotton, ...

Educational Technology Integration and High-Stakes Testing

ERIC Educational Resources Information Center

Daniel, Tracy Demetrie

2012-01-01

Determining if the investment in educational technology will improve student achievement is complicated and multifarious. The purpose of this study was to evaluate the influence of teacher technology integration on student achievement as measured by the Mississippi Subject Area Testing Program (SATP) and to explore the relationship between…

Enhancing Practicum Supervision with Asynchronous and Synchronous Technologies

ERIC Educational Resources Information Center

Teo, Yiong Hwee; McNamara, Sue; Romeo, Geoff; Gronn, Donna

2015-01-01

Three video/web conferencing technologies (Pocket Camcorder, Skype, Adobe Connect) were used in regional schools in Australia to determine whether the technologies are appropriate for the needs of the university supervisor, trainee teachers and supervising teachers with regard to practicum teaching placements. Findings revealed that Pocket…

High Technology Needs Assessment.

ERIC Educational Resources Information Center

Southeastern Louisiana Univ., Hammond.

A project produced a high technology status report providing needs assessment data for educational planning. The purpose was to determine the impact and future of high technology in Louisiana. Information was obtained from 68 Louisiana manufacturing industries by mailed questionnaire. Data indicated that 45 industries were involved in high tech. A…

DEMONSTRATION AND EVALUATION OF TECHNOLOGIES FOR DETERMINING THE SUITABILITY OF USTS FOR UPGRADING WITH CATHODIC PROTECTION

EPA Science Inventory

Field applications of three alternate technologies for assessing the suitability of underground storage tanks for upgrading by the addition of cathodic protection were observed and documented. The technologies were applied to five existing underground storage tanks that were slat...

Indigenous knowledges driving technological innovation

Treesearch

Lilian Alessa; Carlos Andrade; Phil Cash Cash; Christian P. Giardina; Matt Hamabata; Craig Hammer; Kai Henifin; Lee Joachim; Jay T. Johnson; Kekuhi Kealiikanakaoleohaililani; Deanna Kingston; Andrew Kliskey; Renee Pualani Louis; Amanda Lynch; Daryn McKenny; Chels Marshall; Mere Roberts; Taupouri Tangaro; Jyl Wheaton-Abraham; Everett Wingert

2011-01-01

This policy brief explores the use and expands the conversation on the ability of geospatial technologies to represent Indigenous cultural knowledge. Indigenous peoples' use of geospatial technologies has already proven to be a critical step for protecting tribal self-determination. However, the ontological frameworks and techniques of Western geospatial...

The Deflector Selector: A Machine Learning Framework for Prioritizing Hazardous Object Deflection Technology Development

NASA Astrophysics Data System (ADS)

Nesvold, Erika; Greenberg, Adam; Erasmus, Nicolas; Van Heerden, Elmarie; Galache, J. L.; Dahlstrom, Eric; Marchis, Franck

2018-01-01

Several technologies have been proposed for deflecting a hazardous Solar System object on a trajectory that would otherwise impact the Earth. The effectiveness of each technology depends on several characteristics of the given object, including its orbit and size. The distribution of these parameters in the likely population of Earth-impacting objects can thus determine which of the technologies are most likely to be useful in preventing a collision with the Earth. None of the proposed deflection technologies has been developed and fully tested in space. Developing every proposed technology is currently prohibitively expensive, so determining now which technologies are most likely to be effective would allow us to prioritize a subset of proposed deflection technologies for funding and development. We will present a new model, the Deflector Selector, that takes as its input the characteristics of a hazardous object or population of such objects and predicts which technology would be able to perform a successful deflection. The model consists of a machine-learning algorithm trained on data produced by N-body integrations simulating the deflections. We will describe the model and present the results of tests of the effectiveness of nuclear explosives, kinetic impactors, and gravity tractors on three simulated populations of hazardous objects.

TECHNOLOGIES FOR MONITORING AND MEASUREMENT ...

EPA Pesticide Factsheets

A demonstration of technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under EPA's Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in April 2004. This report describes the performance evaluation of CAPE Technologies DF-1 Dioxin/Furan and PCB TEQ Immunoassay Kits. The kits are immunoassay techniques that report the total toxicity equivalents (TEQ) of dioxin/furans and polychlorinated biphenyls (PCBs. The technology results were compared to high resolution mass spectrometry TEQ results generated using EPA Methods 1613B and 1668A.The CAPE Technologies kits generally reported data higher than the certified PE and reference laboratory values. The technologys estimated MDL was 12 to 33 pg/g TEQ. Results from this demonstration suggest that the CAPE Technologies kits could be an effective screening tool for determining sample results above and below 20 pg/g TEQ and even more effective as a screen for sample above and below 50 pg/g TEQ, particularly considering that both the cost ($59,234 vs. $398,029) and the time (3 weeks vs. 8 months) to analyze the 209 demonstration samples were significantly less than those of the reference laboratory. The objective of this program is to promote the acceptance and use of innovative field technologies by providing well-documented performance and cost data obtained from field demonstrations.

The Deflector Selector: A machine learning framework for prioritizing hazardous object deflection technology development

NASA Astrophysics Data System (ADS)

Nesvold, E. R.; Greenberg, A.; Erasmus, N.; van Heerden, E.; Galache, J. L.; Dahlstrom, E.; Marchis, F.

2018-05-01

Several technologies have been proposed for deflecting a hazardous Solar System object on a trajectory that would otherwise impact the Earth. The effectiveness of each technology depends on several characteristics of the given object, including its orbit and size. The distribution of these parameters in the likely population of Earth-impacting objects can thus determine which of the technologies are most likely to be useful in preventing a collision with the Earth. None of the proposed deflection technologies has been developed and fully tested in space. Developing every proposed technology is currently prohibitively expensive, so determining now which technologies are most likely to be effective would allow us to prioritize a subset of proposed deflection technologies for funding and development. We present a new model, the Deflector Selector, that takes as its input the characteristics of a hazardous object or population of such objects and predicts which technology would be able to perform a successful deflection. The model consists of a machine-learning algorithm trained on data produced by N-body integrations simulating the deflections. We describe the model and present the results of tests of the effectiveness of nuclear explosives, kinetic impactors, and gravity tractors on three simulated populations of hazardous objects.

Interactive Whiteboard Technologies in High School: A Comparison of Their Impact on the Levels of Measure That Determine a Return on Investment

ERIC Educational Resources Information Center

Schipper, Joseph M.; Yocum, Russell G.

2016-01-01

This quantitative, quasi-experimental, nonequivalent group study examined the impact on levels of measure that determine a return on investment of differing forms of interactive whiteboard (IWB) technology used at a high school in a suburban school district in southeastern Virginia. Three forms of IWB were compared: a full-screen IWB, a mobile…

Validity and Reliability Dissertation of the Scale Used for Determination of Perceptions and Attitudes of Teacher's Proficiency in Tablet PC-Supported Education

ERIC Educational Resources Information Center

Tugun, Vasfi

2016-01-01

It is important to determine the proficiency perceptions and attitudes of the teachers towards Technologies of learning about the tablets in order to integrate the mobile learning technologies and to use the tablet PCs in the educational environments in an efficient way. Therefore, proficiency perceptions and attitudes of the teachers towards the…

Distribution of Databases on CD-Rom

DTIC Science & Technology

1990-09-01

capabilities, advantages and disadvantages of CD-ROM technology lo determine whelher its use would be a preferred strategy for fulfilling information...capabilities, advantages and disadvantages of CD-ROM technology to determine whether its use would be a preferred strategy for fulfilling information...A. GENERAL 1 B. OBJECTIVE 1 C. RESEARCH METHODOLOGY 2 II. WHAT IS CD-ROM? 3 A. BACKGROUND 3 III. ADVANTAGES AND DISADVANTAGES OF CD-ROM

Eliminating the Rhetoric: An Evaluation of the Halt Phase Strategy

DTIC Science & Technology

1999-06-01

Halt operations can demonstrate to the enemy leadership that continued aggression equals unacceptable risk because air superiority can be exploited...lesson can be drawn. The presence of ground forces demonstrates commitment and leadership . Powerful ground combat forces represent the strongest... leadership far more than technology will determine who wins and who loses." 10 The Fallacy of Technological Determinism Another main theme in critiques of

A Manpower Development Model for an Emerging Technology: A Systems Approach to Curriculum Development for Solar Technician Training.

ERIC Educational Resources Information Center

Green, C. Paul; Orsak, Charles G.

Undertaking of a systems approach to curriculum development for solar training led to (1) a feasibility study to determine the role of the community college in solar energy technology, (2) a market analysis to determine the manpower need, and (3) a task analysis for development of a curriculum for training solar energy technicians at Navarro…

Determination of Motivation of 5th Grade Students Living in Rural and Urban Environments towards Science Learning and Their Attitudes towards Science-Technology Course

ERIC Educational Resources Information Center

Kenar, Ismail; Köse, Mücahit; Demir, Halil Ibrahim

2016-01-01

In this research, determination of motivation of 5th grade students living in rural and urban environments towards science learning and their attitudes towards science-technology course is aimed. This research is conducted based on descriptive survey model. Samples are selected through teleological model in accordance with the aim of this…

What drives innovation in renewable energy technology? Evidence based on patent counts

NASA Astrophysics Data System (ADS)

McCormick, Jesse

America's future economic growth and international competitiveness depend on our capacity to innovate, particularly in emerging global markets. This paper analyzes the forces that drive innovation in one such market, renewable energy technologies, utilizing the theory of induced technological innovation. Specifically, this paper operationalizes the determinants of innovation to consist of: 1) private market forces, 2) public policy that influences price and market size, and 3) public policy that catalyzes R&D investment. Analysis is conducted using a negative binomial regression to determine which of the three foundational determinants has the greatest impact on renewable energy innovation. In so doing this paper builds off of work conducted by Johnstone et al. (2010). Innovation is measured using European Patent Office data on a panel of 24 countries spanning the period from 1978-2005. The implications of this study are straightforward; policies, not market forces, are responsible for driving innovation in renewable energy technologies. Market-oriented policies are effective for mature technologies, particularly hydro, and to a lesser extent wind and solar power. R&D-oriented policy is effective for a broader technology set. In short, the United States needs a comprehensive policy environment to support renewable energy innovation; market forces alone will not provide the pace and breadth of innovations needed. That environment can and should be strategically targeted, however, to effectively allocate scare resources.

The Diffusion of Military Technologies to Foreign Nations: Arms Transfers Can Preserve the Defense Technological and Industrial Base

DTIC Science & Technology

1995-06-01

required, the Defense Technology Security Administration ( DTSA ) will make a determination on whether or not advanced technologies are being risked by the...sale or transfer of that product. DTSA has this role whether it is a commercial or government-to-government transfer. The Joint Chiefs of Staff also...Office of Defense Relations Security Assistance DSAA Defense Security Assistance Agency DTIB Defense Technological and Industrial Base DTSA Defense

Technology Preparation of K-6 Elementary Education Teachers in University System of New Hampshire Post-Secondary Programs and Technology Utilization in the New Hampshire K-6 Classroom: A Study of Alignment

ERIC Educational Resources Information Center

Marks, Nicholas W.

2016-01-01

The purpose of this study was to determine whether there is alignment between post-secondary institutions' technology training preparation of teachers and the use of technology in K-6 schools in the State of New Hampshire. For the purpose of the study, alignment is defined as the correlation of specific technology preparation for teachers to…

Extension Youth Educators' Technology Use in Youth Development Programming

ERIC Educational Resources Information Center

McClure, Carli; Buquoi, Brittany; Kotrlik, Joe W.; Machtmes, Krisanna; Bunch, J. C.

2014-01-01

The purpose of this descriptive-correlational study was to determine the use of technology in youth programming by Extension youth development educators in Louisiana, Mississippi, and Tennessee. Data were collected via e-mail and a SurveyMonkey© questionnaire. Extension educators are using some technology in youth development programming. More…

Preservice Teachers' Beliefs, Attitudes, and Motivation about Technology Integration

ERIC Educational Resources Information Center

Cullen, Theresa A.; Greene, Barbara A.

2011-01-01

The Theory of Planned Behavior was used as a framework, along with Self-Determination Theory, to examine preservice teachers' motivation to include technology in their future teaching. We modified instruments to measure theoretical constructs to be applied to plans for the use of technology. Measured were: perceived behavioral control, attitudes…

Technology Transfer Educational Curriculum Plan for the State of Colorado.

ERIC Educational Resources Information Center

Dakin, Karl J.

A recommended plan for an educational curriculum on the topic of technology transfer is outlined. A survey was conducted to determine the current levels of ability and knowledge of technology users and of transfer intermediaries. Information was collected from three sources: individuals and organizations currently presenting educational programs…

Communication Technologies Preferred by School Based Administrators

ERIC Educational Resources Information Center

Weir, Paul

2012-01-01

The purpose of this study was to determine the communication technologies preferred by school based administrators. This study surveyed and interviewed 96 school based administrators in a mid-sized suburban school system. The data show that individual emails, email lists, and cell phone technologies had the highest percentage effectiveness ratings…

TECHNOLOGIES FOR MONITORING AND MEASUREMENT OF DIOXIN AND DIOXIN-LIKE COMPOUNDS IN SOIL AND SEDIMENT. HYBRIZYME CORPORATION AHRC PCR KIT

EPA Science Inventory

A demonstration of technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under EPA's Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in April 2004. This report describes the performance evaluation ...

Technology Adoption: Influence of Availability and Accessibility

ERIC Educational Resources Information Center

McConnell, William Stewart

2009-01-01

Farmers are small business leaders using available technology to remain competitive. The availability of technology is dependent on the suppliers' use of the marketing mix 4Ps theory--product, price, placement, and promotion. The purpose of this study was to determine how the relation between availability and accessibility influences the adoption…

An Examination of the Determinants of Top Management Support of Information Technology Projects

ERIC Educational Resources Information Center

Mahoney, Michael L.

2011-01-01

Despite compelling evidence that top management support promotes information technology project success, existing research fails to offer insight into the antecedents of top management support of such projects. This gap in the literature is significant since the exploitation of information technology offers organizations unique opportunities for…

Technology and Academic Advising: Student Usage and Preferences

ERIC Educational Resources Information Center

Gaines, Trudi

2014-01-01

When both time and financial resources are limited, administrators selectively decide upon proper utilization of current technology and determine whether monies should be expended on new, flashy, and attractive technology realizing that it may not contribute to the advising experience. By obtaining feedback from the students whom the academic…

TQE, Technology, and Teaching.

ERIC Educational Resources Information Center

Hertzke, Eugene R.; Olson, Warren E.

This book provides a total "how-to" approach for the use of technology, including information on the types of systems, hardware, and software available. It offers guidelines for determining how to match specific systems and needs, as well as strategies for implementing technology and Total Quality Education (TQE) to improve teaching. It…

GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

EPA Science Inventory

The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

Computer Technology-Infused Learning Enhancement

ERIC Educational Resources Information Center

Keengwe, Jared; Anyanwu, Longy O.

2007-01-01

The purpose of the study was to determine students' perception of instructional integration of computer technology to improve learning. Two key questions were investigated in this study: (a) What is the students' perception of faculty integration of computer technology into classroom instruction? (b) To what extent does the students' perception of…

Differences in Adaptive Competency Acquisition between Traditionally Certified and Alternatively Certified Technology Education Teachers.

ERIC Educational Resources Information Center

Coyle-Rogers, Patricia G.; Rogers, George E.

A study determined whether there are any differences in the adaptive competency acquisition between technology education teachers who have completed a school district add-on alternative certification process and technology education teachers who completed a traditional baccalaureate degree certification program. Non-probability sampling was used…

40 CFR 63.176 - Quality improvement program for pumps.

Code of Federal Regulations, 2013 CFR

2013-07-01

..., operating or maintenance practices, and pump or pump seal designs or technologies that have poorer than... shall also be used to determine if there are superior performing pump or pump seal technologies that are... average emission performance. A superior performing pump or pump seal technology is one with a leak...

40 CFR 63.176 - Quality improvement program for pumps.

Code of Federal Regulations, 2011 CFR

2011-07-01

..., operating or maintenance practices, and pump or pump seal designs or technologies that have poorer than... shall also be used to determine if there are superior performing pump or pump seal technologies that are... average emission performance. A superior performing pump or pump seal technology is one with a leak...

40 CFR 63.176 - Quality improvement program for pumps.

Code of Federal Regulations, 2012 CFR

2012-07-01

..., operating or maintenance practices, and pump or pump seal designs or technologies that have poorer than... shall also be used to determine if there are superior performing pump or pump seal technologies that are... average emission performance. A superior performing pump or pump seal technology is one with a leak...

The Influence of Teacher Professional Development on Technology Integration at the Secondary Level

ERIC Educational Resources Information Center

Baldwin, Kristi Lynn

2011-01-01

Traditionally, professional development for technology integration has been insufficient or ineffective for supporting changes in classroom practice. This study examined the professional development experiences of secondary school teachers in South Dakota related to educational technology in order to determine core content area teachers' perceived…

Instructional Technology and Worker Learning Needs. Contractor Report.

ERIC Educational Resources Information Center

Kearsley, Greg

The effects of instructional technology on learning are determined by the extent to which hardware and software amplify the basic capabilities of an instructor. Experience indicates that rational considerations such as cost-effectiveness are not usually the primary factors in making decisions about use of technology in training. Most large…

Uses of Technology to Support Reflective Teaching Practices

ERIC Educational Resources Information Center

Brent, Wayne

2010-01-01

This dissertation researched and reported on how technology was used to facilitate and inform reflective teaching practices. It also identified the characteristics of benefits and barriers in using technology for teaching and reflection. The study, descriptive in nature, was designed to determine the reflective practices of instructors and how…

Educational Technology Research Journals: "Australasian Journal of Educational Technology," 2003-2012

ERIC Educational Resources Information Center

Hadlock, Camey Andersen; Clegg, J. Aleta; Hickman, Garrett R.; Huyett, Sabrina Lynn; Jensen, Hyrum C.; West, Richard E.

2014-01-01

The authors analyzed all research articles in the "Australasian Journal of Educational Technology" from 2003 to 2012 to determine the types of research methodologies published, major contributing authors, and most frequently referenced keywords, abstract terms, and cited articles. During this decade, the majority of articles published…

Educators' Perceived Importance of Web 2.0 Technology Applications

ERIC Educational Resources Information Center

Pritchett, Christal C.; Wohleb, Elisha C.; Pritchett, Christopher G.

2013-01-01

This research study was designed to examine the degree of perceived importance of interactive technology applications among various groups of certified educators; the degree to which education professionals utilized interactive online technology applications and to determine if there was a significant difference between the different groups based…

Analyzing Preservice Teachers' Attitudes towards Technology

ERIC Educational Resources Information Center

Akturk, Ahmet Oguz; Izci, Kemal; Caliskan, Gurbuz; Sahin, Ismail

2015-01-01

Rapid developments in technology in the present age have made it necessary for communities to follow technological developments and adapt themselves to these developments. One of the fields that are most rapidly affected by these developments is undoubtedly education. Determination of the attitudes of preservice teachers, who live in an age of…

32 CFR 2400.26 - Access by historical researchers and former Presidential appointees.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Safeguarding § 2400.26 Access by historical researchers and... be granted only if the Director, Office of Science and Technology Policy: (1) Determines in writing...

32 CFR 2400.26 - Access by historical researchers and former Presidential appointees.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Safeguarding § 2400.26 Access by historical researchers and... be granted only if the Director, Office of Science and Technology Policy: (1) Determines in writing...

32 CFR 2400.26 - Access by historical researchers and former Presidential appointees.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Safeguarding § 2400.26 Access by historical researchers and... be granted only if the Director, Office of Science and Technology Policy: (1) Determines in writing...

32 CFR 2400.26 - Access by historical researchers and former Presidential appointees.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Safeguarding § 2400.26 Access by historical researchers and... be granted only if the Director, Office of Science and Technology Policy: (1) Determines in writing...

32 CFR 2400.26 - Access by historical researchers and former Presidential appointees.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM Safeguarding § 2400.26 Access by historical researchers and... be granted only if the Director, Office of Science and Technology Policy: (1) Determines in writing...

National Survey of Computer Aided Manufacturing in Industrial Technology Programs.

ERIC Educational Resources Information Center

Heidari, Farzin

The current status of computer-aided manufacturing in the 4-year industrial technology programs in the United States was studied. All industrial technology department chairs were mailed a questionnaire divided into program information, equipment information, and general comments sections. The questionnaire was designed to determine the subjects…

Demographic Survey of Female Faculty in Technology Education Programs.

ERIC Educational Resources Information Center

Heidari, Farzin

A study was conducted to determine the general program information and the demographic status of female faculty in four-year technology education programs in the United States. Information was gathered through a literature review and a questionnaire mailed to all 70 technology education programs listed in the 1994 International Technology…

15 CFR 732.2 - Steps regarding scope of the EAR.

Code of Federal Regulations, 2013 CFR

2013-01-01

...) of this section. (b) Step 2: Publicly available technology and software. This step is relevant for both exports and reexports. Determine if your technology or software is publicly available as defined... practical examples describing publicly available technology and software that are outside the scope of the...

15 CFR 732.2 - Steps regarding scope of the EAR.

Code of Federal Regulations, 2014 CFR

2014-01-01

...) of this section. (b) Step 2: Publicly available technology and software. This step is relevant for both exports and reexports. Determine if your technology or software is publicly available as defined... practical examples describing publicly available technology and software that are outside the scope of the...

15 CFR 732.2 - Steps regarding scope of the EAR.

Code of Federal Regulations, 2012 CFR

2012-01-01

...) of this section. (b) Step 2: Publicly available technology and software. This step is relevant for both exports and reexports. Determine if your technology or software is publicly available as defined... practical examples describing publicly available technology and software that are outside the scope of the...

15 CFR 732.2 - Steps regarding scope of the EAR.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) of this section. (b) Step 2: Publicly available technology and software. This step is relevant for both exports and reexports. Determine if your technology or software is publicly available as defined... practical examples describing publicly available technology and software that are outside the scope of the...

15 CFR 732.2 - Steps regarding scope of the EAR.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) of this section. (b) Step 2: Publicly available technology and software. This step is relevant for both exports and reexports. Determine if your technology or software is publicly available as defined... practical examples describing publicly available technology and software that are outside the scope of the...

Comparing High School Students' and Adults' Perceptions of Technological Literacy

ERIC Educational Resources Information Center

Harrison, Henry Ladson, III

2009-01-01

This study compared high school student's perceptions of technology and technological literacy to those perceptions of the general public. Additionally, individual student groups were compared statistically to determine significant differences between the groups. The "ITEA/Gallup Poll" instrument was used to survey high school student's…

Investigating Pedagogical Value of Wiki Technology

ERIC Educational Resources Information Center

Hazari, Sunil; North, Alexa; Moreland, Deborah

2009-01-01

This exploratory study investigates the potential of Wiki technology as a tool for teaching and learning. Wikis are a component of Web 2.0 technology tools that provide collaborative features and active learning opportunities in a web-based environment. This research study sought to empirically determine the pedagogical value of using Wiki…

PERFORMANCE OF THE CAPE TECHNOLOGIES DF1 DIOXIN/FURAN IMMUNOASSAY KIT FOR SOIL AND SEDIMENT SAMPLES

EPA Science Inventory

A demonstration of screening technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under the U.S. Environmental Protection Agency’s (EPA’s) Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in 2004. ...

30 CFR 7.52 - New technology.

Code of Federal Regulations, 2011 CFR

2011-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.52 New technology. MSHA may approve a battery assembly that incorporates technology for which the requirements of this subpart are not applicable, if the Agency determines that the battery assembly is as safe as those which meet the...

30 CFR 7.52 - New technology.

Code of Federal Regulations, 2012 CFR

2012-07-01

... MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.52 New technology. MSHA may approve a battery assembly that incorporates technology for which the requirements of this subpart are not applicable, if the Agency determines that the battery assembly is as safe as those which meet the...

40 CFR 401.12 - Law authorizing establishment of effluent limitations guidelines for existing sources, standards...

Code of Federal Regulations, 2010 CFR

2010-07-01

... available demonstrated control technology, processes, operating methods, or other alternatives, including... technology currently available as determined by the Administrator pursuant to section 304(b)(1) of the Act... available technology economically achievable which will result in reasonable further progress toward the...

76 FR 8775 - Importer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

... FR 69459, Formulation Technologies LLC., 11501 Domain Drive, Suite 130, Austin, Texas 78758, made... factors in 21 U.S.C. 823(a) and 952(a) and determined that the registration of Formulation Technologies..., 1971. DEA has investigated Formulation Technologies LLC. to ensure that the company's registration is...

75 FR 44974 - Intent To Request Renewal From OMB of One Current Public Collection of Information: Sensitive...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-30

... TSA PRA Officer, Office of Information Technology (OIT), TSA-11, Transportation Security... technological collection techniques or other forms of information technology. Information Collection Requirement... history records check (CHRC), (2) a name-based check to determine whether the individual poses or is...

75 FR 36694 - Importer of Controlled Substances; Notice of Registration

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-28

... 160), Mylan Technologies Inc., 110 Lake Street, Saint Albans, Vermont 05478, made application by.... 823(a) and 952(a), and determined that the registration of Mylan Technologies Inc. to import the basic.... DEA has investigated Mylan Technologies Inc. to ensure that the company's registration is consistent...

A Model for Pedagogical and Curricula Transformation with Technology.

ERIC Educational Resources Information Center

Wetzel, David R.

The purpose of this study was to investigate the factors that influenced five middle school science teachers as they implemented and integrated instructional technology in their curricula, along with determining the effects that implementation and integration of instructional technology had on their pedagogy and curricula. The study involved…

Are We Better without Technology?

ERIC Educational Resources Information Center

Kara, Ahmet

2017-01-01

The purpose of this study was to determine the effect of visual element and technology supported teaching upon perceived instructor behaviors by pre-service teachers. In accordance with this purpose, whereas the lessons were lectured without benefiting from visual elements and technology in a traditional way with the students included in the…

NASA technology utilization program: The small business market

NASA Technical Reports Server (NTRS)

Vannoy, J. K.; Garcia-Otero, F.; Johnson, F. D.; Staskin, E.

1980-01-01

Technology transfer programs were studied to determine how they might be more useful to the small business community. The status, needs, and technology use patterns of small firms are reported. Small business problems and failures are considered. Innovation, capitalization, R and D, and market share problems are discussed. Pocket, captive, and new markets are summarized. Small manufacturers and technology acquisition are discussed, covering external and internal sources, and NASA technology. Small business and the technology utilization program are discussed, covering publications and industrial applications centers. Observations and recommendations include small business market development and contracting, and NASA management technology.

Neonates and Infants Discharged Home Dependent on Medical Technology: Characteristics and Outcomes.

PubMed

Toly, Valerie Boebel; Musil, Carol M; Bieda, Amy; Barnett, Kimberly; Dowling, Donna A; Sattar, Abdus

2016-10-01

Preterm neonates and neonates with complex conditions admitted to a neonatal intensive care unit (NICU) may require medical technology (eg, supplemental oxygen, feeding tubes) for their continued survival at hospital discharge. Medical technology introduces another layer of complexity for parents, including specialized education about neonatal assessment and operation of technology. The transition home presents a challenge for parents and has been linked with greater healthcare utilization. To determine incidence, characteristics, and healthcare utilization outcomes (emergency room visits, rehospitalizations) of technology-dependent neonates and infants following initial discharge from the hospital. This descriptive, correlational study used retrospective medical record review to examine technology-dependent neonates (N = 71) upon discharge home. Study variables included demographic characteristics, hospital length of stay, and type of medical technology used. Analysis of neonates (n = 22) with 1-year postdischarge data was conducted to identify relationships with healthcare utilization. Descriptive and regression analyses were performed. Approximately 40% of the technology-dependent neonates were between 23 and 26 weeks' gestation, with birth weight of less than 1000 g. Technologies used most frequently were supplemental oxygen (66%) and feeding tubes (46.5%). The mean total hospital length of stay for technology-dependent versus nontechnology-dependent neonates was 108.6 and 25.7 days, respectively. Technology-dependent neonates who were female, with a gastrostomy tube, or with longer initial hospital length of stay were at greater risk for rehospitalization. Assessment and support of families, particularly mothers of technology-dependent neonates following initial hospital discharge, are vital. Longitudinal studies to determine factors affecting long-term outcomes of technology-dependent infants are needed.

Technology and the boundaries of the hospital: three emerging technologies.

PubMed

Goldsmith, Jeff

2004-01-01

U.S. hospitals have proved remarkably adept at altering their service offerings to incorporate new technologies. New technologies threatened to undercut hospitals' central role in health care delivery in the 1980s. An array of new technologies promise yet again to alter the boundaries of hospitals' franchise. These technologies will not only continue the shift away from acute, inpatient care that we have seen for the past thirty years but will also challenge hospitals to collaborate more effectively with physicians and technology developers. How hospitals and policymakers respond to these emerging technologies will help determine whether hospitals remain at the center of the U.S. health system.

Explicating an Evidence-Based, Theoretically Informed, Mobile Technology-Based System to Improve Outcomes for People in Recovery for Alcohol Dependence

PubMed Central

Gustafson, David H.; Isham, Andrew; Baker, Timothy; Boyle, Michael G.; Levy, Michael

2011-01-01

Post treatment relapse to uncontrolled alcohol use is common. More cost-effective approaches are needed. We believe currently available communication technology can use existing models for relapse prevention to cost-effectively improve long-term relapse prevention. This paper describes: 1) research-based elements of alcohol related relapse prevention and how they can be encompassed in Self Determination Theory (SDT) and Marlatt’s Cognitive Behavioral Relapse Prevention Model, 2) how technology could help address the needs of people seeking recovery, 3) a technology-based prototype, organized around Self Determination Theory and Marlatt’s model and 4) how we are testing a system based on the ideas in this article and related ethical and operational considerations. PMID:21190410

Successful implementation of new technologies in nursing care: a questionnaire survey of nurse-users

PubMed Central

2011-01-01

Background A growing number of new technologies are becoming available within nursing care that can improve the quality of care, reduce costs, or enhance working conditions. However, such effects can only be achieved if technologies are used as intended. The aim of this study is to gain a better understanding of determinants influencing the success of the introduction of new technologies as perceived by nursing staff. Methods The study population is a nationally representative research sample of nursing staff (further referred to as the Nursing Staff Panel), of whom 685 (67%) completed a survey questionnaire about their experiences with recently introduced technologies. Participants were working in Dutch hospitals, psychiatric organizations, care organizations for mentally disabled people, home care organizations, nursing homes or homes for the elderly. Results Half of the respondents were confronted with the introduction of a new technology in the last three years. Only half of these rated the introduction of the technology as positive. The factors most frequently mentioned as impeding actual use were related to the (kind of) technology itself, such as malfunctioning, ease of use, relevance for patients, and risks to patients. Furthermore nursing staff stress the importance of an adequate innovation strategy. Conclusions A prerequisite for the successful introduction of new technologies is to analyse determinants that may impede or enhance the introduction among potential users. For technological innovations special attention has to be paid to the (perceived) characteristics of the technology itself. PMID:22032728

Successful implementation of new technologies in nursing care: a questionnaire survey of nurse-users.

PubMed

de Veer, Anke J E; Fleuren, Margot A H; Bekkema, Nienke; Francke, Anneke L

2011-10-27

A growing number of new technologies are becoming available within nursing care that can improve the quality of care, reduce costs, or enhance working conditions. However, such effects can only be achieved if technologies are used as intended. The aim of this study is to gain a better understanding of determinants influencing the success of the introduction of new technologies as perceived by nursing staff. The study population is a nationally representative research sample of nursing staff (further referred to as the Nursing Staff Panel), of whom 685 (67%) completed a survey questionnaire about their experiences with recently introduced technologies. Participants were working in Dutch hospitals, psychiatric organizations, care organizations for mentally disabled people, home care organizations, nursing homes or homes for the elderly. Half of the respondents were confronted with the introduction of a new technology in the last three years. Only half of these rated the introduction of the technology as positive.The factors most frequently mentioned as impeding actual use were related to the (kind of) technology itself, such as malfunctioning, ease of use, relevance for patients, and risks to patients. Furthermore nursing staff stress the importance of an adequate innovation strategy. A prerequisite for the successful introduction of new technologies is to analyse determinants that may impede or enhance the introduction among potential users. For technological innovations special attention has to be paid to the (perceived) characteristics of the technology itself.

15 CFR 296.22 - Award criteria.

Code of Federal Regulations, 2013 CFR

2013-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM The Competition Process § 296.22 Award criteria. NIST must determine that a proposal successfully meets all of the...

15 CFR 296.22 - Award criteria.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM The Competition Process § 296.22 Award criteria. NIST must determine that a proposal successfully meets all of the...

15 CFR 296.22 - Award criteria.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM The Competition Process § 296.22 Award criteria. NIST must determine that a proposal successfully meets all of the...

15 CFR 296.22 - Award criteria.

Code of Federal Regulations, 2014 CFR

2014-01-01

... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS TECHNOLOGY INNOVATION PROGRAM The Competition Process § 296.22 Award criteria. NIST must determine that a proposal successfully meets all of the...

Maximizing the business value of information technology in home care and hospice.

PubMed

2012-08-01

Health care technology provides the key to becoming the high performing efficient organization you want to be. But how do you sift through the many available solutions and determine which technology to acquire? Do you fully understand the best practices for choosing and using technology and measuring the value gained once your new solutions are in place? Get a map to the digital road from Suzanne Sblendorio, director of Healthcare Information Technology Consulting at Simione Healthcare Consultants.

Technology assessment of future intercity passenger transporation systems. Volume 2: Identification of issues affecting intercity transportation

NASA Technical Reports Server (NTRS)

1976-01-01

Papers on major issues and trends that affect the future of intercity transportation are presented. Specific areas covered include: political, social, technological, institutional, and economic mechanisms, the workings of which determine how future intercity transporation technologies will evolve and be put into service; the major issues of intercity transportation from the point of view of reform, including candidate transporation technologies; and technical analysis of trends affecting the evolution of intercity transportation technologies.

Implications of Technology Transfers for the USSR

DTIC Science & Technology

1977-01-01

process is primarily a people-process. Technology is best transferred from firm to firm and from country to country by people (managers, engineers, sales ... sales engineers, etc.) rather than by publications (including blueprints) or products themselves. In the postwar period, the Soviets have concentrated on...determined as the residual category of end-use, and Soviet gold sales and imports of grain from the Developed West are exogenous rather than determined

A Description of Older Adults' Participation in a Technology-Based Piano Program and Their Musical Skill Development, Perceptions of Personal Fulfillment, and Attitudes toward Music Learning

ERIC Educational Resources Information Center

Mitak, Kirsten Nora

2012-01-01

The purpose of this study was to determine the feasibility of Piano Wizard(TM) as a viable technological and instructional tool for older adults. Piano Wizard's applicability for seniors was determined by participants' musical skill development, perceptions of personal fulfillment, attitudes toward music learning, and opinions about the…

Techniques for evaluating optimum data center operation

DOEpatents

Hamann, Hendrik F.; Rodriguez, Sergio Adolfo Bermudez; Wehle, Hans-Dieter

2017-06-14

Techniques for modeling a data center are provided. In one aspect, a method for determining data center efficiency is provided. The method includes the following steps. Target parameters for the data center are obtained. Technology pre-requisite parameters for the data center are obtained. An optimum data center efficiency is determined given the target parameters for the data center and the technology pre-requisite parameters for the data center.

What factors determine therapists' acceptance of new technologies for rehabilitation – a study using the Unified Theory of Acceptance and Use of Technology (UTAUT).

PubMed

Liu, Lili; Miguel Cruz, Antonio; Rios Rincon, Adriana; Buttar, Vickie; Ranson, Quentin; Goertzen, Darrell

2015-01-01

The aim of this study was to examine what factors affect the acceptance behavior and use of new technologies for rehabilitation by therapists at a large rehabilitation hospital in Canada. A self-administrated paper-based survey was created by adapting scales with high levels of internal consistency in prior research using the Unified Theory of Acceptance and Use of Technology (UTAUT). Items were scored on a 7-point Likert scale, ranging from "strongly disagree (1)" to "strongly agree (7)". The target population was all occupational therapists (OT) and physical therapists (PT) involved with the provision of therapeutic interventions at the hospital. Our research model was tested using partial least squares (PLS) technique. Performance expectancy was the strongest salient construct for behavioral intention to use new technologies in rehabilitation, whereas neither effort expectancy nor social influence were salient constructs for behavioral intention to use new technologies; (4) facilitating condition and behavioral intention to use new technologies were salient constructs for current use of new technologies in rehabilitation, with facilitating condition the strongest salient for current use of new technologies in rehabilitation. In a large rehabilitation hospital where use of new technologies in rehabilitation is not mandatory, performance expectancy, or how the technology can help in therapists' work, was the most important factor in determining therapists' acceptance and use of technologies. However, effort expectancy and social influence constructs were not important, i.e. therapists were not influenced by the degree of difficulty or social pressures to use technologies. Behavioral intention and facilitating condition, or institutional support, are related to current use of new technologies in rehabilitation.

Technology in the teaching of neuroscience: enhanced student learning.

PubMed

Griffin, John D

2003-12-01

The primary motivation for integrating any form of education technology into a particular course or curriculum should always be to enhance student learning. However, it can be difficult to determine which technologies will be the most appropriate and effective teaching tools. Through the alignment of technology-enhanced learning experiences with a clear set of learning objectives, teaching becomes more efficient and effective and learning is truly enhanced. In this article, I describe how I have made extensive use of technology in two neuroscience courses that differ in structure and content. Course websites function as resource centers and provide a forum for student interaction. PowerPoint presentations enhance formal lectures and provide an organized outline of presented material. Some lectures are also supplemented with interactive CD-ROMs, used in the presentation of difficult physiological concepts. In addition, a computer-based physiological recording system is used in laboratory sessions, improving the hands-on experience of group learning while reinforcing the concepts of the research method. Although technology can provide powerful teaching tools, the enhancement of the learning environment is still dependent on the instructor. It is the skill and enthusiasm of the instructor that determines whether technology will be used effectively.

Humanity and Environment Co-influence in the Shadow of Technological Convergence

NASA Astrophysics Data System (ADS)

Ezdina, Natalya

2017-11-01

Today one of the most important issues is the search for controlled ways of sustainable development of civilization, society, and a human. Previously, the development of society was determined by natural and evolutionary factors based on the principle of natural selection of living organisms and populations. However, as social institutions are developing, the technological factors of development, determined by the ideas about this phenomenon - the special arrangement of productive forces and the need to protect or change the environment, began to appear. The end of the 20th century was marked by the realization of a new, universal form of economic and technological synthesis - convergence, which, in the process of developing science and improving technology, became so comprehensive and widespread that today it can be called the force that transforms the environment. In this regard, it is convergent technologies that become the focus and the basis for research of the processes uniting the main spheres of human activity - science, society and technology, which will lead to a new form of interaction with the environment, conditioned not only by scientific and technological changes and social factors, but also new organizational forms of their interaction.

Incorporating spectroscopy and measurement technology into the high school chemistry laboratory

NASA Astrophysics Data System (ADS)

Harbert, Emily Ann

Science and technology are becoming increasingly important in maintaining a healthy economy at home and a competitive edge on the world stage, though that is just one facet affected by inadequate science education in the United States. Engaging students in the pursuit of knowledge and giving them the skills to think critically are paramount. One small way to assist in achieving these goals is to increase the quality and variety of technology-rich activities conducted in high school classrooms. Incorporating more laboratory measurement technology into high schools may incite more student interest in the processes and practices of science and may allow students to learn to think more critically about their data and what it represents. The first objective of the work described herein was to determine what measurement technology is being used in schools and to what extent, as well as to determine other teacher needs and preferences. Second, the objective was to develop a new program to provide incoming freshmen (or rising seniors) with measurement technology training they did not receive in high school, and expose them to new research and career opportunities in science. The final objective was to create a technology-rich classroom laboratory activity for use in high schools.

Determination of optimum parameters of the technological process for plates forming from V95 and V-1461 alloys in creep applied in aircrafts constructed by “Sukhoi design bureau”

NASA Astrophysics Data System (ADS)

Raevskaya, G. A.; Zakharchenko, K.; Larichkin, A.

2017-10-01

The research is devoted to the scientific justification of metal processing by pressure with the help of thick monolithic plates forming (thickness 40 mm) from the V95 (analog 7475) (Al-Zn-Mg-Cu) and V-1461 (analog 2099) (Al-Cu-Li-Zn) alloys in creep and close-to-superplasticity. Optimum parameters of the technological process of plate forming are described. The effect of temperature on the magnitude of mechanical stresses (relaxation) during the tests of materials on pure bending is experimentally determined. Forming of thick plates (40 mm) on the UFP-1M unit, and the control of the obtained surface, in comparison with the given electronic model, made it possible to experimentally determine the time and number of forming stages. Mechanical properties of the material after the technological process and heat treatment are preliminary evaluated. The efficiency of using the obtained parameters of the technological process and treatment of metals by pressure in such methods in general is shown.

The Effective Use of System and Software Architecture Standards for Software Technology Readiness Assessments

DTIC Science & Technology

2011-05-01

IEC 42010 Technology Viewpoint • Case Study – Multimedia Conferencing System – Technology Specification • Risks of Software TRL Determination...fully support the required threshold functionality . • Relevant Environment for Space* – A satellite from launch to standard operation in space is...Analytical and experimental critical function and/or characteristic f f t TRL 4 TRL 3 proo o concep Technology concept and/or application

Space power systems technology enablement study. [for the space transportation system

NASA Technical Reports Server (NTRS)

Smith, L. D.; Stearns, J. W.

1978-01-01

The power system technologies which enable or enhance future space missions requiring a few kilowatts or less and using the space shuttle were assessed. The advances in space power systems necessary for supporting the capabilities of the space transportation system were systematically determined and benefit/cost/risk analyses were used to identify high payoff technologies and technological priorities. The missions that are enhanced by each development are discussed.

Do Science and Technology Teachers and Pre-Service Primary Teachers Have Different Thoughts about Concept Maps in Science and Technology Lessons?

ERIC Educational Resources Information Center

Karakuyu, Yunus

2011-01-01

The purpose of this study is to determine the thoughts of primary science and technology teachers, primary class teachers, pre-service primary class teachers and pre-service primary science and technology teachers' about concept maps. This scale applied the use of basic and random method on the chosen 125 4th and 5th grade primary class teachers…

Empirical study of the perceived ease of use and relative advantage on load-bearing masonry (LBM) technology adoption

NASA Astrophysics Data System (ADS)

Ramli, Nor Azlinda; Abdullah, Che Sobry; Nawi, Mohd Nasrun Mohd

2017-11-01

Load-bearing masonry (LBM) technology has been identified as an alternative method that can potentially encourage the sustainability of the housing industry. The adoption of LBM technology is believed to bring beneficial effects to the housing industry as well as company productivity. The factors related to the adoption LBM technology was revealed to strongly influence the implementation of this system in the housing industry. The aim of this study is to determine the factors influencing the adoption of LBM technology among the developer firms in Malaysia as well as the factors that are highly related to perceived ease of use and relative advantage. A random sampling technique was applied and a questionnaire-based field survey was carried out to obtain the data from the respondents. All the data were analyzed using Partial Least Squares Structural Equation Modeling (PLS-SEM). The findings of this paper have revealed that perceived ease of use and relative advantage are related to the adoption of LBM technology. The findings also indicated the validity of Technology Acceptance Model TAM (perceived ease of use) and Innovation Diffusion Theory IDT (relative advantage) as the determinant factors in the adoption of LBM technology. Finally, some recommendations for future research are suggested in the final section of this paper.

Taking Part in Technology Education: Elements in Students' Motivation

ERIC Educational Resources Information Center

Autio, Ossi; Hietanoro, Jenni; Ruismaki, Heikki

2011-01-01

The purpose of this study was to determine the elements motivating comprehensive school students to study technology education. In addition, we tried to discover how students' motivation towards technology education developed over the period leading up to their school experience and the effect this might have on their future involvement with…

Database Management Systems: A Case Study of Faculty of Open Education

ERIC Educational Resources Information Center

Kamisli, Zehra

2004-01-01

We live in the information and the microelectronic age, where technological advancements become a major determinant of our lifestyle. Such advances in technology cannot possibly be made or sustained without concurrent advancement in management systems (5). The impact of computer technology on organizations and society is increasing as new…

Influence of Transformational Leadership Style on Decision-Making Style and Technology Readiness: A Correlation Study

ERIC Educational Resources Information Center

Mueller, Crystal A.

2009-01-01

The research addressed the problem of technology initiatives failing to meet organizational objectives. The purpose of the quantitative correlation study was to determine the relationship between transformational leadership styles, decision-making styles, and technology readiness. The findings of the study answered research questions in three…

The Effects of Technology-Mediated Dialogic Learning in Elementary Mathematics Instruction

ERIC Educational Resources Information Center

Working, Christopher

2018-01-01

The use of technology in elementary mathematics instruction tends to be low-level, despite its affordance of supporting the development of students' high-level reasoning ability. This study builds upon a sociocultural view of learning and was designed to determine what effect a technology-mediated dialogic learning intervention has on third-grade…

Faculty' Technology Barriers Faced within the Framework of Quality Processes: SAU Sample

ERIC Educational Resources Information Center

Elmas, Muzaffer

2012-01-01

This research was carried out to determine technology barriers faced by the instructors within the framework of quality processes conducted at the University of Sakarya.Therefore, technology barriers encountered in the process of teaching while using web sites developed in order to manage quality operations from a single center were examined…

A Study of the Pedagogical and Technological Training Needs of Northeast Ohio Vocational Educators.

ERIC Educational Resources Information Center

Burrell, Lewis P.

A Pedagogical and Technological Survey Instrument (PTSI) was administered to determine whether an inservice training need existed for upgrading and modernization of vocational educators in the vocational pedagogical and technological service areas. The PTSI was mailed to 120 individuals with district program responsibilities; 83 responded.…

Teacher Perceptions of the Effective Implementation of Interactive Technologies in One Virginia Middle School

ERIC Educational Resources Information Center

Dockum, James R.

2009-01-01

It was the purpose of this study to determine teacher perceptions of the effective implementation of interactive technologies in one Virginia middle school. The questions that guided this study were the following: What are the Virginia middle school teachers' perceptions of effective integration of interactive technologies? Specifically: What are…

Determinants of Mobile Wireless Technology for Promoting Interactivity in Lecture Sessions: An Empirical Analysis

ERIC Educational Resources Information Center

Gan, Chin Lay; Balakrishnan, Vimala

2014-01-01

The aim of this paper is to identify adoption factors of mobile wireless technology to increase interactivity between lecturers and students during lectures. A theoretical framework to ascertain lecturers' intentions to use mobile wireless technology during lectures (dependent variable) is proposed with seven independent variables. The…

Preparing for a New Century: Information Technology Workforce Needs.

ERIC Educational Resources Information Center

Teeter, Thomas A.; Bailey, Janet L.; Cherepski, Don D.; Faucett, John; Hines, Robert J.; Jovanovic, Nickolas S.; Tschumi, Pete; Walker, Jeffery T.; Watson, Gretchen B.

The purpose of this project was to determine workforce needs in the new information technology/knowledge-based world in order to design a coherent minor program in information technology at the University of Arkansas at Little Rock for the non-technically oriented college student. The process consisted of three phases: site visits to five…

Designing and Implementing an Integrated Technological Pedagogical Science Knowledge Framework for Science Teachers Professional Development

ERIC Educational Resources Information Center

Jimoyiannis, Athanassios

2010-01-01

This paper reports on the design and the implementation of the Technological Pedagogical Science Knowledge (TPASK), a new model for science teachers professional development built on an integrated framework determined by the Technological Pedagogical Content Knowledge (TPACK) model and the authentic learning approach. The TPASK curriculum…

A Survey of Computer Use in Associate Degree Programs in Engineering Technology.

ERIC Educational Resources Information Center

Cunningham, Pearley

As part of its annual program review process, the Department of Engineering Technology at the Community College of Allegheny County, in Pennsylvania, conducted a study of computer usage in community college engineering technology programs across the nation. Specifically, the study sought to determine the types of software, Internet access, average…

Final Report on the Performance of the Eichrom Technologies Procept® Rapid Dioxin Assay for Soil and Sediment Samples

EPA Science Inventory

A demonstration of screening technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under the U.S. Environmental Protection Agency’s (EPA’s) Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in 2004. ...

Factors that May Influence or Hinder Use of Instructional Technology among Accounting Faculty

ERIC Educational Resources Information Center

Ahadiat, Nasrollah

2005-01-01

Purpose: To determine what factors influence faculty's decisions to use technology in their classes, what factors prevent them from use, and whether there are differences among faculty by gender, ethnicity, rank, sub-areas, etc. in using instructional technology. Design/methodology/approach: A survey instrument was used to measure attitudes…

STEM-Based Computational Modeling for Technology Education

ERIC Educational Resources Information Center

Clark, Aaron C.; Ernst, Jeremy V.

2008-01-01

According to professionals in education, change is an ever-present and evolving process. With transformation in education at both state and national levels, technology education must determine a position in this climate of change. This paper reflects the views on the future of technology education based on an ongoing research project. The purpose…

Individual Autonomy, Law, and Technology: Should Soft Determinism Guide Legal Analysis?

ERIC Educational Resources Information Center

Cockfield, Arthur J.

2010-01-01

How one thinks about the relationship between individual autonomy (sometimes referred to as individual willpower or human agency) and technology can influence the way legal thinkers develop policy at the intersection of law and technology. Perspectives that fall toward the "machines control us" end of the spectrum may support more interventionist…

Don't Ask Me Why: Preschool Teachers' Knowledge in Technology as a Determinant of Leadership Behavior

ERIC Educational Resources Information Center

Öqvist, Anna; Högström, Per

2018-01-01

In the Swedish preschool curriculum, technology education is emphasized as one of the most significant pedagogical areas. Particularly, the teacher's role is emphasized: It is the preschool teacher's responsibility to stimulate and challenge children's interest in science and technology. Unfortunately, prior research indicates that preschool…

Web Conferencing of Pre-Service Teachers' Practicum in Remote Schools

ERIC Educational Resources Information Center

Gronn, Donna; Romeo, Geoff; McNamara, Sue; Teo, Yiong Hwee

2013-01-01

The purpose of this study was to field-test several conferencing technologies in regional schools to determine whether the technologies are appropriate for the needs of the university supervisor, trainee teachers and supervising teachers in practicum placements. The study also explored the potential of technology for other related purposes. Four…

INTERIM REPORT ON THE EVOLUTION AND PERFORMANCE OF THE EICHROM TECHNOLOGIES PROCEPT RAPID DIOXIN ASSAY FOR SOIL AND SEDIMENT SAMPLES

EPA Science Inventory

A demonstration of screening technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under the U.S. Environmental Protection Agency's(EPA's) Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in 2004. T...

DEMONSTRATION AND QUALITY ASSURANCE PROJECT PLAN TECHNOLOGIES FOR THE MONITORING AND MEASUREMENT OF DIOXIN AND DIOXIN-LIKE COMPOUNDS IN SOIL AND SEDIMENT

EPA Science Inventory

The demonstration of technologies for determining the presence of dioxin in soil and sediment is being conducted under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in Saginaw, Michigan, at Green Point Environmental Learning Center fr...

Physical Education Teacher's Attitudes towards Philosophy of Education and Technology

ERIC Educational Resources Information Center

Turkeli, Anil; Senel, Omer

2016-01-01

The current study was carried out to find out the attitudes of physical education teachers towards educational philosophy and technology, and to determine the relationship between the philosophy of education that they adopt and their attitudes toward technology. With this aim, the study was conducted on 22 female and 69 male physical education…

Predicting Acceptance of Mobile Technology for Aiding Student-Lecturer Interactions: An Empirical Study

ERIC Educational Resources Information Center

Gan, Chin Lay; Balakrishnan, Vimala

2017-01-01

The current study sets out to identify determinants affecting tertiary students' behavioural intentions to use mobile technology in lectures. The study emphasises that the reason for using mobile technology in classrooms with large numbers of students is to facilitate interactions among students and lecturers. The proposed conceptual framework has…

Educational Technology Decision-Making: Technology Acquisition for 746,000 Ontario Students

ERIC Educational Resources Information Center

Ribeiro, Jason

2016-01-01

The author explores the technology procurement process in Ontario's publicly funded school districts to determine if it is aligned with relevant research, is grounded in best practices, and enhances student learning. Using a qualitative approach, 10 senior leaders (i.e., chief information officers, superintendents, etc.) were interviewed to reveal…

Instructional Technology: Factors Influencing the Field. Occasional Paper No. 1.

ERIC Educational Resources Information Center

Hug, William E.

By definition, the fields of instructional technology and media are committed to an evaluation, generation, and application of research involving the act of teaching and the phenomena of learning, with differences in systems determined by the purpose for which instructional technology and media are applied. However success or failure of any…

Collaborative Leadership Development with ICT: Experiences from Three Exemplary Schools

ERIC Educational Resources Information Center

Hauge, Trond Eiliv; Norenes, Svein Olav

2015-01-01

This study utilized a tool-oriented perspective on the uptake and use of digital technology in three exemplary upper secondary schools, to determine how the school leaders viewed leadership in the development of information and communication technology (ICT)-enriched environments for teaching and learning, and how they utilized technology in their…

ENVIROGEN PROPANE BIOSTIMULATION TECHNOLOGY FOR THE IN-SITU TREATMENT OF MTBE-CONTAMINATED GROUND WATER INNOVATIVE TECHNOLOGY EVALUATION REPORT

EPA Science Inventory

The primary objective of the Biostimulation Technology Evaluation was to determine if biodegradation was occurring in a ground-water Test Plot to a sufficient degree to reduce intrinsic MTBE to the State of California's treatability criteria of 5 mg/L or below. The evaluation wa...

Towards Technology Integration: The Impact of Motivational and Volitional Email Messages

ERIC Educational Resources Information Center

Kim, ChanMin; Keller, John M.

2011-01-01

The purpose of this study was to determine the effects of motivational and volitional email messages (MVEM) on preservice teachers' motivation, volition, performance, and their attitudes toward technology integration. Each of four sections in an educational technology course for preservice teachers was randomly assigned to one of two groups: one…

Middle School Students' Motivation for Learning Technology in South Korea

ERIC Educational Resources Information Center

Kwon, Hyuksoo

2016-01-01

This study aims to develop a feasible instrument for determining middle school students' motivation to learn technology in South Korea. The authors translated Glynn's motivational instrument and modified it to measure Korean middle school students' motivation to learn technology. The instrument was applied to 441 students of grade 8 and 9 from six…

School Principals' Technology Leadership Competency and Technology Coordinatorship

ERIC Educational Resources Information Center

Banoglu, Koksal

2011-01-01

The aim of this study is to determine the primary and high school principals' competency in technology leadership and so to define implications for advanced competency. The population of the study was formed by 134 school principals in Maltepe and Kadikoy districts in Istanbul. On account of the fact that population was reachable, no specific…

Geospatial Technology in Geography Education

ERIC Educational Resources Information Center

DeMers, Michael N.

2016-01-01

Depending on how you determine the starting point for the technology driving geographic information systems (GIS) and remote sensing, it is well over fifty years old now. During the first years of its existence in the early 1960s, the new technology benefited relatively few students who attended the handful of college programs that were actually…

Analyzing Preservice Teachers' Technological Pedagogical Content Knowledge Development in the Context of a Multidimensional Teacher Preparation Program

ERIC Educational Resources Information Center

Shinas, Valerie Harlow; Karchmer-Klein, Rachel; Mouza, Chrystalla; Yilmaz-Ozden, Sule; Glutting, Joseph J.

2015-01-01

In this quantitative study, correlational and multiple regression analyses were conducted to examine the technological pedagogical content knowledge (TPACK) development of 299 preservice teachers in response to the technology preparation they received during their initial teacher licensure program. Survey data were analyzed to determine the…

An Instrument to Determine the Technological Literacy Levels of Upper Secondary School Students

ERIC Educational Resources Information Center

Luckay, Melanie B.; Collier-Reed, Brandon I.

2014-01-01

In this article, an instrument for assessing upper secondary school students' levels of technological literacy is presented. The items making up the instrument emerged from a previous study that employed a phenomenographic research approach to explore students' conceptions of technology in terms of their understanding of the "nature…

Construction Project Performance Improvement through Radio Frequency Identification Technology Application on a Project Supply Chain

ERIC Educational Resources Information Center

Wang, Heng

2017-01-01

Construction project productivity typically lags other industries and it has been the focus of numerous studies in order to improve the project performance. This research investigated the application of Radio Frequency Identification (RFID) technology on construction projects' supply chain and determined that RFID technology can improve the…

Evaluating Assistive Technology in Early Childhood Education: The Use of a Concurrent Time Series Probe Approach

ERIC Educational Resources Information Center

Parette, Howard P.; Blum, Craig; Boeckmann, Nichole M.

2009-01-01

As assistive technology applications are increasingly implemented in early childhood settings for children who are at risk or who have disabilities, it is critical that teachers utilize observational approaches to determine whether targeted assistive technology-supported interventions make a difference in children's learning. One structured…

Technology and Transition in the 21st Century

ERIC Educational Resources Information Center

Kellems, Ryan O.; Grigal, Meg; Unger, Darlene D.; Simmons, Thomas J.; Bauder, Debra; Williams, Caroline

2015-01-01

Devices like smartphones, tablets, and MP3 players are becoming everyday tools for the majority of the population. Technology can assist students with disabilities in many self-determination activities, such as choice making, decision making, and self-management. In addition, technology tools can support them in a wide range of transition-related…

Determination of Self Efficacy Perception Levels of Teachers' Attending an Online Course toward Web Pedagogical Content Knowledge

ERIC Educational Resources Information Center

Oskay, Özge Özyalçin; Odabasi, Zuhal

2016-01-01

The effects of technological developments occurred new requirements in educational area. Today's teachers should know the content knowledge they teach, have pedagogical knowledge about teaching and learning methods and besides should use the technological tools effectively. Depending on these, new concepts such as Technological Pedagogical Content…

The Role of School Administrators in the Use of Technology

ERIC Educational Resources Information Center

Öznacar, Behcet; Dericioglu, Sonay

2017-01-01

This research is conducted to obtain the thoughts of state high school administrators to determine the obstacles that they are exposed to while using technology and attempting to integrate technology into their schools. The research is carried out through using the qualitative research design "phenomenology." The sample group of this…

Disruptive Silence: Deepening Experiential Learning in the Absence of Technology

ERIC Educational Resources Information Center

Smith, Carol A.; Parks, Rodney; Parrish, Jesse; Swirski, Ryan

2018-01-01

Technology plays an integral role in the lives of the majority of the US population. As technology becomes integrated into young people's lives, questions arise regarding its effects on learning. This exploratory study draws on interviews with students who attend university in the United States to determine how separating students from technology…

Comic Relief: Graduate Students Address Multiple Meanings for Technology Integration with Digital Comic Creation

ERIC Educational Resources Information Center

Sockman, Beth Rajan; Sutton, Rhonda; Herrmann, Michele

2016-01-01

This study determined the usefulness of digital comic creation with 77 graduate students in a teacher technology course. Students completed an assigned reading and created digital comics that addressed technology integration concerns in the schools and society. Using practical action research, 77 student-created comics were analyzed. The findings…

University Students and Ethics of Computer Technology Usage: Human Resource Development

ERIC Educational Resources Information Center

Iyadat, Waleed; Iyadat, Yousef; Ashour, Rateb; Khasawneh, Samer

2012-01-01

The primary purpose of this study was to determine the level of students' awareness about computer technology ethics at the Hashemite University in Jordan. A total of 180 university students participated in the study by completing the questionnaire designed by the researchers, named the Computer Technology Ethics Questionnaire (CTEQ). Results…

Comparative Review of Pedagogical Technologies in the Educational Process of Higher Educational Institutions

ERIC Educational Resources Information Center

Kulmagambetova, Svetlana S.; Iskindirova, Saltanat K.; Kazhiakparova, Zhadyra S.; Bainiyeva, Kulyash T.; Pandya, Chimay

2016-01-01

The present rapid technological progress and the post-crisis period determine the increasing demand for revision of existing concepts and strategies aimed at maintaining global development. This article describes pedagogical technologies, indicates the need to reform the outdated education systems or to reject them completely in order to improve…

76 FR 491 - Approval and Promulgation of Implementation Plans; New Mexico; Federal Implementation Plan for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... Pollution Affecting Visibility and Best Available Retrofit Technology Determination AGENCY: Environmental... technology (BART) for NO X for this source. This action is being taken under section 110 and part C of the.... Visibility Protection 3. Best Available Retrofit Technology 4. The Western Regional Air Partnership and...

Across the Great Divide: The Effects of Technology in Secondary Biology Classrooms

ERIC Educational Resources Information Center

Worley, Johnny Howard, II

2015-01-01

This study investigates the relationship between technology use and student achievement in public high school across North Carolina. The purpose of this study was to determine whether a digital divide (differences in technology utilization based on student demographics of race/ethnicity, gender, socioeconomic status, and municipality) exists among…

Cross-Cultural Issues of Office Technology Management: Comparing Canada and the United States.

ERIC Educational Resources Information Center

Gattiker, Urs E.; And Others

Although the internationalization of business makes cross-cultural research on workers' attitudes toward computer-based technology valuable to management, cross-cultural studies are rare. A study was conducted to determine whether employees in the United States differ from Canadian employees in their evaluation of computer-based technology due to…

TECHNOLOGIES FOR MONITORING AND MEASUREMENT OF DIUOXIN AND DIOXIN-LIKE COMPOUNDS IN SOIL AND SEDIMENT. ABRAXIS LLC COPLANAR PCB ELISA KIT

EPA Science Inventory

A demonstration of technologies for determining the presence of dioxin and dioxin-like compounds in soil and sediment was conducted under EPA's Superfund Innovative Technology Evaluation Program in Saginaw, Michigan in April 2004. This report describes the performance evaluation ...

Determinants of information technology outsourcing among health maintenance organizations.

PubMed

Wholey, D R; Padman, R; Hamer, R; Schwartz, S

2001-09-01

We analyze the determinants of HMO information technology outsourcing using two studies. Study 1 examines the effect of asset specificity on outsourcing for development and operation activities, using HMO specific fixed effects to control for differences between HMOs. Study 2 regresses the HMO specific fixed effects from Study 1, which measure an HMO's propensity to outsource, on HMO characteristics. The data comes from a 1995 InterStudy survey about information technology organization of HMOs. While HMOs split roughly equally in outsourcing information technology development activities, they are extremely unlikely to outsource the day-to-day operation of information systems. The greater an HMO's information technology capability and the complexity of information systems supported, the less likely is an HMO to outsource. While HMOs less than two years old, for-profit HMOs, local or Blue Cross-affiliated HMOs, and mixed HMOs are more likely to outsource, federally qualified HMOs are less likely to outsource. Policy and managerial implications for the adoption and diffusion of new ways of organizing information technology, such as application service providers (ASPs), are discussed.

ECLSS Integration Analysis: Advanced ECLSS Subsystem and Instrumentation Technology Study for the Space Exploration Initiative

NASA Technical Reports Server (NTRS)

1990-01-01

In his July 1989 space policy speech, President Bush proposed a long range continuing commitment to space exploration and development. Included in his goals were the establishment of permanent lunar and Mars habitats and the development of extended duration space transportation. In both cases, a major issue is the availability of qualified sensor technologies for use in real-time monitoring and control of integrated physical/chemical/biological (p/c/b) Environmental Control and Life Support Systems (ECLSS). The purpose of this study is to determine the most promising instrumentation technologies for future ECLSS applications. The study approach is as follows: 1. Precursor ECLSS Subsystem Technology Trade Study - A database of existing and advanced Atmosphere Revitalization (AR) and Water Recovery and Management (WRM) ECLSS subsystem technologies was created. A trade study was performed to recommend AR and WRM subsystem technologies for future lunar and Mars mission scenarios. The purpose of this trade study was to begin defining future ECLSS instrumentation requirements as a precursor to determining the instrumentation technologies that will be applicable to future ECLS systems. 2. Instrumentation Survey - An instrumentation database of Chemical, Microbial, Conductivity, Humidity, Flowrate, Pressure, and Temperature sensors was created. Each page of the sensor database report contains information for one type of sensor, including a description of the operating principles, specifications, and the reference(s) from which the information was obtained. This section includes a cursory look at the history of instrumentation on U.S. spacecraft. 3. Results and Recommendations - Instrumentation technologies were recommended for further research and optimization based on a consideration of both of the above sections. A sensor or monitor technology was recommended based on its applicability to future ECLS systems, as defined by the ECLSS Trade Study (1), and on whether its characteristics were considered favorable relative to similar instrumentation technologies (competitors), as determined from the Instrumentation Survey (2). The instrumentation technologies recommended by this study show considerable potential for development and promise significant returns if research efforts are invested.

Foresight Model of Turkey's Defense Industries' Space Studies until 2040

NASA Astrophysics Data System (ADS)

Yuksel, Nurdan; Cifci, Hasan; Cakir, Serhat

2016-07-01

Being advanced in science and technology is inevitable reality in order to be able to have a voice in the globalized world. Therefore, for the countries, making policies in consistent with their societies' intellectual, economic and political infrastructure and attributing them to the vision having been embraced by all parties of the society is quite crucial for the success. The generated policies are supposed to ensure the usage of countries' resources in the most effective and fastest way, determine the priorities and needs of society and set their goals and related roadmaps. In this sense, technology foresight studies based on justified forecasting in science and technology have critical roles in the process of developing policies. In this article, Foresight Model of Turkey's Defense Industries' Space Studies, which is turned out to be the important part of community life and fundamental background of most technologies, up to 2040 is presented. Turkey got late in space technology studies. Hence, for being fast and efficient to use its national resources in a cost effective way and within national and international collaboration, it should be directed to its pre-set goals. By taking all these factors into consideration, the technology foresight model of Turkey's Defense Industry's Space Studies was presented in the study. In the model, the present condition of space studies in the World and Turkey was analyzed; literature survey and PEST analysis were made. PEST analysis will be the inputs of SWOT analysis and Delphi questionnaire will be used in the study. A two-round Delphi survey will be applied to the participants from universities, public and private organizations operating in space studies at Defense Industry. Critical space technologies will be distinguished according to critical technology measures determined by expert survey; space technology fields and goals will be established according to their importance and feasibility indexes. Finally, for the decision makers, opportunist and possible prospective exploratory scenarios will be set forth according to determined vision. Keywords Turkey's Defense Industries, Space Studies, Foresight, PEST, SWOT, Delphi

75 FR 52316 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-25

...-acquired in 2003 or 2004 and that the Office of the Under Secretary of Defense for Acquisition, Technology & Logistics determined at that time possessed defense critical technology under development. Affected Public...

77 FR 20333 - Approval, Disapproval and Promulgation of Implementation Plans; Nebraska; Regional Haze State...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-04

...; Federal Implementation Plan for Best Available Retrofit Technology Determination; Extension of Public... Best Available Retrofit Technology (BART) requirements for sulfur dioxide (SO 2 ) at one source in...

Technology assessment for the anesthesiologist.

PubMed

Abenstein, J P

2006-12-01

The expense associated with modern heath care in the United States is very high, in excess of 15% of the GDP, continues to grow and has become a significant public policy issue. New technologies, defined as all drugs, devices, procedures, and organizational systems, are major contributors to rising health care costs. The use of health technology assessment tools can assist those in leadership positions in making rational decisions as to which new technologies to adopt. The classical approach is to use data from prospective, randomized, clinical trials that compare the outcomes of those treated with the new technology and the accepted therapy. Using this information and detailed economic data, the cost-effectiveness ratio can be determined. The accepted metrics are either dollars per life year saved or dollars per quality-adjusted life year saved. If the new medical intervention costs less than $50,000 to 80,000 dollars per life year saved, it is considered to be cost-effective and worthy of adoption. This kind of analysis is complex and expensive. In addition, the required information is not always available, limiting the applicability of this approach. Finally, the economic analysis often includes down-stream expense and benefit not relevant from a medical center perspective. Another approach is to focus the analysis to what impacts the medical center. This includes determining whether the technology has received the necessary approvals and has been shown to be effective, to improve health outcomes, to be at least as effective as standard therapy, and to be achievable outside the investigative setting. A fiscal analysis also must be done to determine what will it cost to acquire and operate the technology, what are the anticipated patient volumes and payer mix, and what will be the down-stream consequences to the medical center. If the process concludes that the technology works, makes a positive difference to patient care, and is fiscally and operationally acceptable, it should be purchased. After the technology has been installed and has been used, a postimplementation review should be done. This review should go over the same attributes that led to the decision to purchase. It should be determined whether the expected patient volumes, outcomes, income, and expenses were seen. If not, the technology assessment process should be refined to make better decisions in the future. Finally, if the results are at a substantial negative variance from what was anticipated, abandoning the technology should be considered. Anesthesiology either directly controls or indirectly influences a significant portion of medical technology in every medical center. Therefore, the processes that have been discussed in this article should be used by the department of anesthesiology to assure optimal patient care and the fiscal stability of the organization.

Collision count in rugby union: A comparison of micro-technology and video analysis methods.

PubMed

Reardon, Cillian; Tobin, Daniel P; Tierney, Peter; Delahunt, Eamonn

2017-10-01

The aim of our study was to determine if there is a role for manipulation of g force thresholds acquired via micro-technology for accurately detecting collisions in rugby union. In total, 36 players were recruited from an elite Guinness Pro12 rugby union team. Player movement profiles and collisions were acquired via individual global positioning system (GPS) micro-technology units. Players were assigned to a sub-category of positions in order to determine positional collision demands. The coding of collisions by micro-technology at g force thresholds between 2 and 5.5 g (0.5 g increments) was compared with collision coding by an expert video analyst using Bland-Altman assessments. The most appropriate g force threshold (smallest mean difference compared with video analyst coding) was lower for all forwards positions (2.5 g) than for all backs positions (3.5 g). The Bland-Altman 95% limits of agreement indicated that there may be a substantial over- or underestimation of collisions coded via GPS micro-technology when using expert video analyst coding as the reference comparator. The manipulation of the g force thresholds applied to data acquired by GPS micro-technology units based on incremental thresholds of 0.5 g does not provide a reliable tool for the accurate coding of collisions in rugby union. Future research should aim to investigate smaller g force threshold increments and determine the events that cause coding of false positives.

DNA microarray technology in nutraceutical and food safety.

PubMed

Liu-Stratton, Yiwen; Roy, Sashwati; Sen, Chandan K

2004-04-15

The quality and quantity of diet is a key determinant of health and disease. Molecular diagnostics may play a key role in food safety related to genetically modified foods, food-borne pathogens and novel nutraceuticals. Functional outcomes in biology are determined, for the most part, by net balance between sets of genes related to the specific outcome in question. The DNA microarray technology offers a new dimension of strength in molecular diagnostics by permitting the simultaneous analysis of large sets of genes. Automation of assay and novel bioinformatics tools make DNA microarrays a robust technology for diagnostics. Since its development a few years ago, this technology has been used for the applications of toxicogenomics, pharmacogenomics, cell biology, and clinical investigations addressing the prevention and intervention of diseases. Optimization of this technology to specifically address food safety is a vast resource that remains to be mined. Efforts to develop diagnostic custom arrays and simplified bioinformatics tools for field use are warranted.