Has Technology Been Considered? A Guide for IEP Teams. CASE/TAM Assistive Technology Policy and Practice Series.

ERIC Educational Resources Information Center

Chambers, A. C.

This guide compiles information essential to a working knowledge of assistive technology for children with disabilities. It addresses the definition of assistive technology and provides information on laws which direct the provision of assistive technology. The manual provides a framework to guide the Individualized Education Program (IEP) team as…

Learning Resources and Technology. A Guide to Program Development.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford.

This guide provides a framework to assist all Connecticut school districts in planning effective learning resources centers and educational technology programs capable of providing: a well developed library media component; shared instructional design responsibilities; reading for enrichment; integration of computers into instruction; distance…

Resource Guide to Federal Funding for Technology in Education.

ERIC Educational Resources Information Center

Department of Education, Washington, DC.

This guide provides information about funding resources available from the Federal government for programs involving educational technology. Funding programs are included for the following government agencies: U.S. Department of Education; Department of Commerce; National Science Foundation (NSF); Department of Energy (DOE); National Aeronautics…

Natural Resources Technologies: A Suggested Post High School Program Development Guide.

ERIC Educational Resources Information Center

Soles, Robert L.

This post high school program development guide considers the following natural resources technological areas: air pollution control, forest, rangeland, minerals and mineral fuels, geological, outdoor recreation, soil, urban-regional planning, landscape, water, wastewater, oceanography, wildlife, fish, and marine life. Within each area, the…

Precision Machining Technology. Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This curriculum guide was developed from a Technical Committee Report prepared with the assistance of industry personnel and containing a Task List which is the basis of the guide. It presents competency-based program standards for courses in precision machining technology and is part of the Idaho Vocational Curriculum Guide Project, a cooperative…

The Open Academic Model for the Systems Engineering Graduate Program at Stevens Institute of Technology

ERIC Educational Resources Information Center

Lasfer, Kahina

2012-01-01

The Systems Engineering Program at Stevens Institute of Technology has developed the Open Academic Model (OAM) to guide its strategic planning and operations since its founding in 2001. Guided by OAM, the Stevens Systems Engineering Program (SSEP) has grown from inception in 2001 into one of the largest in the US. The main objectives of the…

Management and Marketing. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in management and marketing occupations, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

Logistics. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in logistics occupations, use technology in the logistics field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale and…

Financial Management. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in financial management, use technology in the financial management field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. The first section provides a program rationale…

Cosmetology Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in cosmetology, use technology in the cosmetology field effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program rationale and…

Import Auto Technician; Curriculum Guide for the Development of an Import Automobile Technology Program.

ERIC Educational Resources Information Center

East Los Angeles Coll., CA.

In this curriculum guide, courses in a three-phase community college program for training import automobile technicians are provided. Following an introducation to the guide, the background of the development of the program, the program, the instruction, support for instruction, and the import automobile industry are discussed. Sample options for…

Equasions for Curriculum Improvement.

ERIC Educational Resources Information Center

Eckenrod, James S.

1986-01-01

Describes the Technology in Curriculum (TIC) program resource guides which will be distributed to California schools in the fall of 1986. These guides match available instructional television programs and computer software to existing California curriculum guides in order to facilitate teachers' classroom use. (JDH)

Problem Solving: The "Wright" Math. The Centennial of Flight Special Edition. An Educator Guide with Activities in Mathematics, Science, and Technology. NASA CONNECT[TM].

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

NASA CONNECT is an annual series of integrated mathematics, science, and technology instructional distance learning programs for students in grades 6-8. This program is designed for students to learn about the evolution of flight. The program has three components--television broadcast, Web activity, and lesson guide--which are designed as an…

Industrial Arts Curriculum Guide for Power Technology.

ERIC Educational Resources Information Center

Connecticut State Dept. of Education, Hartford. Div. of Vocational Education.

This curriculum guide provides topic outlines and objectives for units in a three-level/-course Power Technology program. Introductory materials are objectives for industrial education and for power technology and list of general safety rules. Units contained in Level I, Power Technology, are History of Power, Basic Machines, Forms of Power, Power…

Environmental Technology. Curriculum Guide for Agriscience 384.

ERIC Educational Resources Information Center

Bradley, Jennifer Campbell; Dettling, Joe

This guide outlines the topics of instruction and goals/objectives of a semester-long half-unit laboratory course in environmental technology (Agriscience 384) that is part of Texas' agricultural science and technology program. Presented first are lists of the following: essential elements common to all agricultural science and technology courses…

GLOBE Program Teacher's Guide.

ERIC Educational Resources Information Center

1997

The GLOBE Program is a worldwide, hands-on educational program for elementary and secondary school students. GLOBE aims to increase student achievement in mathematics and science, awareness towards the environment, and improve science process skills through network technology. This teacher's guide provides an overview of the GLOBE program and…

SITE EMERGING TECHNOLOGY Program

EPA Science Inventory

This document is intended as a reference guide for EPA Regional decision makers and others interested in tchnologies in the SITE Demonstration and Technologies programs. The Technologies are described in technology profiles presented in alphabetical order by developer name and se...

Plant Operations for Wastewater Facilities, Vol. II, Part D. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part E. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part B. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Plant Operations for Wastewater Facilities, Vol. II, Part A. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

A Guide for Planning Drafting and Design Technology Programs. Section III, Data Collection and Analysis.

ERIC Educational Resources Information Center

1971

This document, the second of three related reports, constitutes the data collection and analysis section of the study designed to provide information for preparing a planning guide for drafting and design technology programs. The curriculum survey instrument mailed to 26 schools, contained questions regarding: (1) length of semesters, (2)…

Plant Operations for Wastewater Facilities, Vol. II, Part C. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs.

ERIC Educational Resources Information Center

Stoakes, K. C.; And Others

This instructor's guide, designed for use with the curriculum, Plant Operations for Wastewater Facilities, represents a two-year wastewater technology instructional program based on performance objectives designed to prepare undergraduate students to enter occupations in water and wastewater treatment plant operations and maintenance. This…

Site Remediation Technology InfoBase: A Guide to Federal Programs, Information Resources, and Publications on Contaminated Site Cleanup Technologies. First Edition

NASA Technical Reports Server (NTRS)

1998-01-01

Table of Contents: Federal Cleanup Programs; Federal Site Remediation Technology Development Assistance Programs; Federal Site Remediation Technology Development Electronic Data Bases; Federal Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Other Electronic Resources for Site Remediation Technology Information; Selected Bibliography: Federal Publication on Alternative and Innovative Site Remediation; and Appendix: Technology Program Contacts.

Radiological Technology. Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Simpson, Bruce; And Others

This curriculum guide was designed for use in postsecondary radiological technology education programs in Georgia. Its purpose is to provide for the development of entry level skills in radiological technology in the areas of knowledge, theoretical structure, tool usage, diagnostic ability, related supportive skills, and occupational survival…

Gap analysis survey: an aid in transitioning to standardized curricula for nuclear medicine technology.

PubMed

Bires, Angela Macci; Mason, Donna L; Gilmore, David; Pietrzyk, Carly

2012-09-01

This article discusses the process by which the Society of Nuclear Medicine Technology Section (SNMTS) is assisting educators as they transition to comply with the fourth edition of the Curriculum Guide for Educational Programs in Nuclear Medicine Technology. An electronic survey was sent to a list of nuclear medicine technology programs compiled by the educational division of the SNMTS. The collected data included committee member demographics, goals and objectives, conference call minutes, consultation discussions, transition examples, 4- and 2-y program curricula, and certificate program curricula. There were 56 responses to the survey. All respondents were program directors, with 3 respondents having more than one type of program, for a total of 59 programs. Of these, 19 (33.93%) were baccalaureate, 19 (28.57%) associate, and 21 (37.5%) certificate. Forty-eight respondents (85.71%) had accreditation through the Joint Review Commission on Educational Programs in Nuclear Medicine Technology, 6 (10.71%) had regional accreditation, and 2 (3.57%) were accredited through other entities. Thirteen categories of required general education courses were identified, and the existing program curricula of 9 (69.2%) courses were more than 50% compliant with the fourth edition Curriculum Guide. The fact that no measurable gap could be found within the didactic professional content across programs was due to the lack of a degree requirement and content standardization within the profession. The data indicated that the participating programs offer a minimum of 1-15 contact hours in emerging technology modalities. The required clinical hours ranged from 765 to 1,920 for degree or certificate completion. The average number of clinical hours required for all programs was 1,331.69. Standardization of the number and types of courses is needed both for current baccalaureate programs and for clinical education. This standardization will guide programs in transitioning from a certificate or associate level to the baccalaureate level. The greatest obstacle is in expanding curricula to meet the recommendations of the fourth edition Curriculum Guide. Such expansion to entry-level competency may be met by incorporating hybrid imaging courses, secondary-level courses, and equivalency courses on the basic sciences and emerging technologies.

Cost-Effective Additive Manufacturing in Space: HELIOS Technology Challenge Guide

NASA Technical Reports Server (NTRS)

DeVieneni, Alayna; Velez, Carlos Andres; Benjamin, David; Hollenbeck, Jay

2012-01-01

Welcome to the HELIOS Technology Challenge Guide. This document is intended to serve as a general road map for participants of the HELIOS Technology Challenge [HTC] Program and the associated inaugural challenge: HTC-01: Cost-Effective Additive Manufacturing in Space. Please note that this guide is not a rule book and is not meant to hinder the development of innovative ideas. Its primary goal is to highlight the objectives of the HTC-01 Challenge and to describe possible solution routes and pitfalls that such technology may encounter in space. Please also note that participants wishing to demonstrate any hardware developed under this program during any future HELIOS Technology Challenge showcase event(s) may be subject to event regulations to be published separately at a later date.

Fundamentals of Construction. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide begins the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind. This guide contains 3 sections and 15…

Industrial Arts--Woods and Wood Technology: A Curriculum Guide for Intermediate and Secondary Level Programs.

ERIC Educational Resources Information Center

Missouri Council for Industrial Arts Education.

The curriculum outline is designed to aid the instructor in developing a more complete course of study in woods and wood technology for intermediate and secondary school students. The guide is introduced by a discussion of objectives fundamental to a sound program of industrial arts education, followed by an outline and objectives for the content…

78 FR 37570 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-21

... Interactive Program Guide and Parental Control Technology; Notice of Request for Statements on the Public... questions regarding filing should contact the Secretary (202-205-2000). Any person desiring to submit a... taken under the authority of section 337 of the Tariff Act of 1930, as amended (19 U.S.C. 1337), and of...

Operating Room Technology. Post Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Simpson, Bruce; And Others

This curriculum guide was designed for use in postsecondary operating room technology education programs in Georgia. Its purpose is to provide for development of entry level skills in operating room technology in the areas of knowledge, theoretical structure, tool usage, diagnostic ability, related supportive skills, and occupational survival…

Technology Education Curriculum Guide for Connecticut-AIASA/TSA.

ERIC Educational Resources Information Center

Monty, Phil

This curriculum guide is designed to provide advisors with ways to manage technology student activities within their American Industrial Arts Student Association/Technology Student Association (AIASA/TSA) program. Section 1 focuses on how to organize a local AIASA/TSA chapter. It covers organizing procedures organizational meetings, chapter…

Northeast Technology Education Consortium: Resource Guide.

ERIC Educational Resources Information Center

Foster, W. Tad, Ed.

This guide is designed to provide additional resources for technology educators who are attempting to shift their programs from industrial arts to technology education. An introduction describes the original demonstration site project, a consortium of Northeastern U.S. schools, the primary goal of which was the advancement of technological…

Technology and Changing Lifestyles. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.

"Technology and Changing Lifestyles" is one of the "Preparing for Tomorrow's World" (PTW) program modules. PTW is an interdisciplinary, future-oriented program incorporating information from the sciences and social sciences and addressing societal concerns which interface science/technology/society. The program promotes…

The name-locator guide: A new resource for technology transfer

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1974-01-01

A new transfer mechanism to facilitate technology transfer between aerospace technology and nonaerospace industries, was proposed with the following sequence of steps. First, the key technical problems in a given industry would be analyzed. The analysis will define the characteristics which relevant technology will have. Second, a limited list of subject terms will be developed using words familiar to those working in the industry. It is these which will be applied in subsequent steps to the NASA technology and used to locate technology relevant to a specific problem in the industry. Third, for each Required Technology Program, terms applicable to that program would be chosen from this list. Fourth, a name-locator guide would be provided to the Regional Dissemination Centers. This guide would be analogous to an index. The key words would be chosen from the special subject term list for the given industry.

How To Create Effective Information and Communication Technology Learning Programmes. A Guide.

ERIC Educational Resources Information Center

Clarke, Alan

This guide, which is intended for information and communication technology (ICT) tutors and tutor managers in Great Britain's further education sector, explains how to create effective ICT learning programs for adults. The guide emphasizes developing students' confidence and providing them with a sound foundation for further study. The following…

The Global Energy Situation on Earth, Student Guide. Computer Technology Program Environmental Education Units.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This is the student guide in a set of five computer-oriented environmental/energy education units. Contents of this guide are: (1) Introduction to the unit; (2) The "EARTH" program; (3) Exercises; and (4) Sources of information on the energy crisis. This guide supplements a simulation which allows students to analyze different aspects of…

Understanding the Impact of New Technology on Life and Work. Secondary Learning Guide 12. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This competency-based secondary learning guide on understanding the impact of new technology is part of a series that are adaptations of guides developed for adult consumer and homemaking education programs. The guides provide students with experiences that help them learn to do the following: make decisions; use creative approaches to solve…

Technology Planning Guide for Minnesota School Districts, Schools and Public Libraries.

ERIC Educational Resources Information Center

Minnesota State Dept. of Children, Families, and Learning, St. Paul.

This guide assists Minnesota school districts and libraries in technology planning by providing information for meeting the requirements for federal assistance through the Universal Service Fund E-rate program and gaining approval from the Minnesota Department of Children, Families & Learning. Fourteen technology plan criteria needing to be…

Engineering Technology Programs. Preliminary Curriculum Planning Guide.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

Developed as a resource to assist in a major revision underway in Georgia area technical schools to change curricula for preparing engineering technicians, this preliminary program-planning guide describes curriculum structures for specialized programs in three major areas--electronics, electromechanics, and mechanics. The handbook, which is…

Home Economics. Education for Technology Employment.

ERIC Educational Resources Information Center

Northern Illinois Univ., De Kalb. Dept. of Technology.

This guide was developed in an Illinois program to help home economics teachers integrate the use of computers and program-related software into existing programs. After students are taught the basic computer skills outlined in the beginning of the guide, 50 learning activities can be used as an integral part of the instructional program. (One or…

Programs for Middle School Math: An Inventory of Existing Technology. Working Paper

ERIC Educational Resources Information Center

Saultz, Andrew

2012-01-01

In this working paper, Andrew Saultz of Michigan State University inventories the current landscape of technology programs available for middle school math. The working paper is not intended as a "consumers' guide" to technology programs, and the descriptions of some specific programs are not fully accurate or current. Readers who are interested…

Chemical Science and Technology I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of an interdisciplinary program of studies entitled the Science and Engineering Technician (SET) Curriculum. This curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic…

Food Science and Technology. Teacher's Instructional Guide [and] Reference Book.

ERIC Educational Resources Information Center

Texas Tech Univ., Lubbock. Curriculum Center for Family and Consumer Sciences.

This reference book and teacher's instructional guide are intended for use in one- and two-year food science and technology programs for Texas high school students. The reference book provides information needed by employees in the food science and technology occupational area. Each chapter includes the following components: (1) a list of the…

Forestry and Wood Technology. Curriculum Guide for Agriscience 383.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Dept. of Agricultural Education.

This guide outlines the topics of instruction and goals/objectives of a semester-long half-unit laboratory course in forestry and wood technology (Agriscience 383) that is designed for students part of Texas' agricultural science and technology program for students in grades 10-12. Presented first are lists of the following: essential elements…

Horizons. A Guide to Postsecondary Education in Ontario, 1988/89.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

A guide to postsecondary opportunities in Ontario (Canada) is presented to help students choose a course of study after completing secondary school. Information is presented on student costs and student financial aid and the Colleges of Applied Arts and Technology. Apprenticeship programs, diploma programs, and certificate programs are identified…

3-2-1 Contact Teacher's Guide.

ERIC Educational Resources Information Center

Children's Television Workshop, New York, NY.

This guide to the television program 3-2-1 Contact covers 20 theme weeks. The program is designed to bring students into closer contact with the science and technology in their everyday lives. This guide includes: (1) a brief introduction to the contents of each week's shows; (2) a detailed discussion of each week's primary concepts as well as…

A Guide for Planning Facilities for Occupational Preparation Programs in Metallurgy Technology. Interim Report. Research 28.

ERIC Educational Resources Information Center

German, Carl, Jr.

The major purpose of this guide is to elicit the information necessary for writing educational specifications for facilities to house technical education programs in metallurgy. It is organized in these parts: (1) Part I discusses the major purpose, underlying assumptions, recent instructional trends, and guiding principles utilized in the…

University guide to NASA, 1993

NASA Technical Reports Server (NTRS)

1992-01-01

This guide provides brief descriptions of the two NASA Headquarters program offices through which NASA primarily funds universities, the Office of Space Science and Applications and the Office of Aeronautics and Space Technology. It also describes NASA's Office of Commercial Programs, which funds the Centers for the Commercial Development of Space and the Small Business Innovation Research Program. This guide explains the roles played by NASA's eight field centers and the Jet Propulsion Laboratory, and gives a sampling of ongoing NASA-wide educational programs and services. Most importantly, this guide provides practical information in the form of names and telephone numbers of NASA contacts.

University guide to NASA, 1993

NASA Astrophysics Data System (ADS)

1992-10-01

This guide provides brief descriptions of the two NASA Headquarters program offices through which NASA primarily funds universities, the Office of Space Science and Applications and the Office of Aeronautics and Space Technology. It also describes NASA's Office of Commercial Programs, which funds the Centers for the Commercial Development of Space and the Small Business Innovation Research Program. This guide explains the roles played by NASA's eight field centers and the Jet Propulsion Laboratory, and gives a sampling of ongoing NASA-wide educational programs and services. Most importantly, this guide provides practical information in the form of names and telephone numbers of NASA contacts.

Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Claus, Robert; And Others

This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

Wood Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Claus, Robert; And Others

This course guide for a wood technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

KWOC (Key-Word-Out-of-Context) Index of US Nuclear Regulatory Commission Regulatory Guide Series

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jennings, S.D.

1990-04-01

To meet the objectives of the program funded by the Department of Energy (DOE)-Nuclear Energy (NE) Technology Support Programs, the Performance Assurance Project Office (PAPO) administers a Performance Assurance Information Program that collects, compiles, and distributes program-related information, reports, and publications for the benefit of the DOE-NE program participants. THE KWOC Index of US Nuclear Regulatory Commission Regulatory Guide Series'' is prepared as an aid in searching for specific topics in the US Nuclear Regulatory Commission, Regulatory Guide Series.

A Curriculum Guide for Industrial Arts Plastic Technology. Intermediate and Secondary Level Students.

ERIC Educational Resources Information Center

Landers, Jack M.

This curriculum guide is an aid to administrators and instructors of industrial arts and vocational-technical school programs for the development of meaningful curriculum in plastics. The materials are intended for use at four levels: level I, exploring plastic technology; Level II, basic plastic technology; and levels III and IV, applied plastic…

Guided Discovery, Visualization, and Technology Applied to the New Curriculum for Secondary Mathematics.

ERIC Educational Resources Information Center

Smith, Karan B.

1996-01-01

Presents activities which highlight major concepts of linear programming. Demonstrates how technology allows students to solve linear programming problems using exploration prior to learning algorithmic methods. (DDR)

32 CFR 2400.15 - Classification guides.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Classification guides. 2400.15 Section 2400.15 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM...

32 CFR 2400.15 - Classification guides.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Classification guides. 2400.15 Section 2400.15 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM...

32 CFR 2400.15 - Classification guides.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Classification guides. 2400.15 Section 2400.15 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM...

32 CFR 2400.15 - Classification guides.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Classification guides. 2400.15 Section 2400.15 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM...

32 CFR 2400.15 - Classification guides.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Classification guides. 2400.15 Section 2400.15 National Defense Other Regulations Relating to National Defense OFFICE OF SCIENCE AND TECHNOLOGY POLICY REGULATIONS TO IMPLEMENT E.O. 12356; OFFICE OF SCIENCE AND TECHNOLOGY POLICY INFORMATION SECURITY PROGRAM...

Understanding the Impact of New Technology on Life and Work. Learning Guide 12. Project Connect. Linking Self-Family-Work.

ERIC Educational Resources Information Center

Emily Hall Tremaine Foundation, Inc., Hartford, CT.

This learning guide on understanding the impact of new technology on life and work is part of a series of learning guides developed for competency-based adult consumer and homemaking education programs in community colleges, adult education centers, community centers, and the workplace. Focus is on the connections among personal, family, and job…

Power Technology (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Lawrence, Allen; And Others

This course guide for a power technology course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a definition and…

Electrical/Electronic Technology (Energy/Power). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

ERIC Educational Resources Information Center

Lawrence, Allen; And Others

This course guide for an electrical/electronic technology course is one of four developed for the energy/power area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--graphic communications and production.) Part 1 provides such introductory information as a…

Electrical Technology. Post Secondary Curriculum Guide.

ERIC Educational Resources Information Center

Butler, Raymond H.; And Others

This curriculum guide provides a model for organizing vocational instructional content for a postsecondary electrical technology program. It is divided into six sections. Section 1 overviews the philosophies, purposes, and goals for vocational education in Georgia. Contents of section 2 include a discussion of employability skills, description of…

Safety & Health. Resource Guide for Occupational/Technology Education.

ERIC Educational Resources Information Center

Kirk, Albert S., Ed.

This guide is intended to alert occupational/technology teachers, teacher educators, school administrators, and industrial education supervisors to the need and importance of a strong and active safety program. Responsibilities are detailed for all individuals involved. Teacher liability is addressed. A section on emergency procedures covers…

Achieving the Goals: Goal 5, First in the World in Math and Science. Technology Resources. [Resource Guide to Federal Support for Technology in Education.

ERIC Educational Resources Information Center

Federal Interagency Committee on Education, Washington, DC.

The information in this volume was compiled in order to provide a guide to the technology-in-education programs of the federal government. The goal of this book is to provide important information about technological resources that will assist teachers, administrators, students, parents and others in achieving the goal of the United States being…

Guide for Program Planning: Medical Laboratory Technician.

ERIC Educational Resources Information Center

Kahler, Carol, Ed.; And Others

Prepared by the American Association of Junior Colleges and the National Council on Medical Technology Education, this guide discusses programs for career-entry supportive medical laboratory personnel which have been cooperatively planned by junior college personnel and the medical community, particularly pathologists and medical technologists.…

Educational Technology and Distance Supervision in Counselor Education

ERIC Educational Resources Information Center

Carlisle, Robert Milton; Hays, Danica G.; Pribesh, Shana L.; Wood, Chris T.

2017-01-01

The authors used a nonexperimental descriptive design to examine the prevalence of distance supervision in counselor education programs, educational technology used in supervision, training on technology in supervision, and participants' (N = 673) perceptions of legal and ethical compliance. Program policies are recommended to guide the training…

SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION - TECHNOLOGY PROFILES

EPA Science Inventory

This document is intended as a reference guide for EPA Regional decision makers and others interested in technologies in the SITE Demonstration and Emerging Technologies programs. The Technologies are described in technology profiles, presented in alphabetical order by developer ...

English as a Second Language for the Workplace. Worker Education Program. Curriculum Guide.

ERIC Educational Resources Information Center

Garcia, Paula; Keresztes-Nagy, Susan

The guide outlines the curriculum designed for a workplace literacy program for about 500 members of a clothing and textile workers union in the Chicago (Illinois) area. The program is intended to prepare workers for the challenges of work in an environment of constantly changing demographics, new technology, and shifting global economy. An…

Preparing for High Technology: Robotics Programs. Research & Development Series No. 233.

ERIC Educational Resources Information Center

Ashley, William; And Others

This guide is one of three developed to provide guidelines, information, and resources useful in planning and developing postsecondary technician training programs in high technology. It is specifically intended for program planners and developers in the initial stages of planning a new program or specialized option in robotics. (Two companion…

Federal Geothermal Research Program Update Fiscal Year 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2004-02-01

The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal and Wind Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The following mission and goal statements guide the overall activities of the Office of Geothermal and Wind Technologies. This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 1999. The information contained in this Research Update illustrates howmore » the mission and goals of the Office of Geothermal and Wind Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy.« less

Tourism Studies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide, focusing on tourism studies, defines competencies that: help students build daily living skills, investigate career options in the design and repair of motor vehicles, use technology in these fields effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs. Section A…

Agricultural Equipment Technology: A Suggested 2-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

Developed by a subject matter specialist, this suggested curriculum guide is intended to assist school administrators, advisory committees, supervisors, and teachers in planning and developing new programs or evaluating existing ones in agricultural equipment technology. The guide provides suggested course outlines, including examples of texts and…

Welding Technology. A Competency Based Articulated Curriculum.

ERIC Educational Resources Information Center

Rosenbalm, Charles; And Others

This document is a competency-based curriculum guide designed to promote articulation in welding technology programs between and among secondary and postsecondary institutions in the Indian Hills Community College and Merged Area XV high schools in Iowa. The guide is organized in eight sections. The first six sections provide background…

Agricultural Electronics. Curriculum Guide for Agriscience 324.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Dept. of Agricultural Education.

This guide outlines the topics of instruction and goals/objectives of a half-unit shop/laboratory course in agricultural electronics (Agriscience 324) that is part of Texas' secondary-level agricultural science and technology program. Presented first are lists of the essential elements common to all agricultural science and technology courses…

75 FR 65652 - Notice of Receipt of Complaint; Solicitation of Comments Relating to the Public Interest

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-26

... Certain Products Containing Interactive Program Guide and Parental Controls Technology, DN 2763; the... guide and parental controls technology. The complaint names as respondents Toshiba Corp. of Minato-ku.../handbook_on_electronic_filing.pdf ). Persons with questions regarding electronic filing should contact the...

Transportation Systems. TE8126. Technology Education.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational and Technical Education Services.

This curriculum guide has been developed as a resource for teachers (especially in North Carolina) to use in planning and implementing a competency-based instructional management technology program in their schools. The guide contains three main section. The first section contains introductory materials and a course blueprint that lists the…

Decisions for Today and Tomorrow: Student Guide. Issues in Science-Technology-Society. A Multidisciplinary Approach to Problem-Solving and Critical-Thinking.

ERIC Educational Resources Information Center

Iozzi, Louis A.; Bastardo, Peter J.

This student guide was designed to be used with senior high school level classes as a supplement to existing programs in the areas of science and social studies. Each of the 12 chapters included in the guide may be used independently or may be combined into a separate course on the relationships between science, technology, and society. The…

I Can Soar: How Technology Helps Students Take Off. A Resource Kit for Parents, Educators, and School Administrators Who Work with Students Who Have Disabilities.

ERIC Educational Resources Information Center

Gruner, Allison; Fleming, Erin; Bradley, Carl; Diamond, Christina M.; Ruedel, Kristin L. A.; Saunders, Jessica; Paulsen, Christine; McInerney, Maurice

This resource kit includes the following: Executive Summary; Legal Fact Sheet; Resource Guide; 26-minute "I Can Soar" Videotape; Video User's Guide; and Stories of Students Featured in Video. The materials provide tips to hep guide consumers in better integrating assistive technology (AT) within effective programs and services for children with…

Ornamental Horticulture Technology; Suggested 2-Year Post High School Curriculums.

ERIC Educational Resources Information Center

Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

Developed by a technical education specialist, this guide is designed to aid school administrators in planning and developing 2-year post-high school programs or evaluating existing programs in ornamental horticulture technology. In addition to general information on the program, contents include course outlines with examples of tests and…

Mississippi Curriculum Framework for Banking & Finance Technology (Program CIP: 52.0803--Banking and Related Financial Programs, Other). Postsecondary Programs.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the banking and finance technology program. Presented in the introduction are a program description and suggested course sequence. Section I is a curriculum guide consisting of outlines for…

Banking/Finance Supplement to the California Business Program Guide.

ERIC Educational Resources Information Center

Cary, Judie; And Others

This supplement to the California Business Education Program Guide for Office and Distributive Occupations is designed to assist office education teachers of secondary, postsecondary, and adult students to update their business education curricula in light of new technology and increasing demand for skilled office workers. Focusing on banking and…

Legal Secretarial Supplement to the California Business Education Program Guide.

ERIC Educational Resources Information Center

Holst, Alice L.; And Others

This supplement to the California Business Education Program Guide for Office and Distributive Occupations is designed to assist office education teachers of secondary, postsecondary, and adult students to update their business education curricula in light of new technology and increasing demand for skilled office workers. Focusing on the legal…

Growing Together with the Treetures. Activity Guide. Series 1.

ERIC Educational Resources Information Center

Schnell, Bobbi; Blau, Judith H.; Hinrichs, Jennifer Judd

This activity guide is designed to be used with the Growing Together program. Tree-related activities are correlated to the Benchmarks for Scientific Literacy, the recommended standards for mathematics, science, and technology suggested by the American Association for the Advancement of Science (AAAS). The Treature Educational Program is dedicated…

Energy and Mines. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This Alberta curriculum guide defines competencies that help students build daily living skills, investigate career options in energy and mines, use technology in the fields of energy and mining effectively and efficiently, and prepare for entry into the workplace or related postsecondary programs in the field. The first section provides a program…

Materials and Fabrication Methods II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; Bay, Robert

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology with the objective of training technicians in the use of electronic instruments and their…

Materials and Fabrication Methods I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Lindberg, Andrew; And Others

This study guide is part of a curriculum entitled Science and Engineering Technician (SET) Curriculum, a program of studies which integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The purpose of this national curriculum development project was to provide a framework for…

How To Survive Your First Year. A Handbook for New Teachers in Health Science Technology Education.

ERIC Educational Resources Information Center

Texas Univ., Austin. Extension Instruction and Materials Center.

This guide is designed to assist teachers who are beginning their first year of teaching Texas' Health Science Technology Education program. Discussed in the guide's seven sections are the following: the state's educational system, the teacher-student relationship, and teachers' internal struggles; planning/scheduling; classroom management…

What Will Happen If...Young Children and the Scientific Mind.

ERIC Educational Resources Information Center

Sprung, Barbara; And Others

Based on the premise that exposure to science and technology is important in early childhood curricula, this guide was developed to help teachers incorporate mathematics, sciences, and technology-related activities into existing programs. Activities contained in this guide focus on concepts in the physical sciences and in the development of…

O&M Best Practices - A Guide to Achieving Operational Efficiency (Release 2.0)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Gregory P.; Pugh, Ray; Melendez, Aldo P.

2004-07-31

This guide, sponsored by DOE's Federal Energy Management Program, highlights operations and maintenance (O&M) programs targeting energy efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide the federal O&M energy manager and practitioner with useful information about O&M management, technologies, energy efficiency and cost-reduction approaches.

Developing Pre-Technical Secondary Education Programs: Rationale, Content, and Methodology.

ERIC Educational Resources Information Center

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide outlines the rationale, content, and methodology of a three-part high technology program that was developed in Georgia to provide secondary school students with training in the areas of electronics and electromechanical and mechanical technologies. Discussed first are the Georgia Initiative, the impact of high technology and the role of…

The potential impact of microgravity science and technology on education

NASA Technical Reports Server (NTRS)

Wargo, M. J.

1992-01-01

The development of educational support materials by NASA's Microgravity Science and Applications Division is discussed in the light of two programs. Descriptions of the inception and application possibilities are given for the Microgravity-Science Teacher's Guide and the program of Undergraduate Research Opportunities in Microgravity Science and Technology. The guide is intended to introduce students to the principles and research efforts related to microgravity, and the undergraduate program is intended to reinforce interest in the space program. The use of computers and electronic communications is shown to be an important catalyst for the educational efforts. It is suggested that student and teacher access to these programs be enhanced so that they can have a broader impact on the educational development of space-related knowledge.

Physics of Mechanical, Gaseous, and Fluid Systems. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Dixon, Peggy; And Others

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and electronic technology. The objective of this curriculum development project is to train technicians in the use of…

Business and Marketing Cluster. Task Analyses.

ERIC Educational Resources Information Center

Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

Developed in Virginia, this publication contains task analysis guides to support selected tech prep programs that prepare students for careers in the business and marketing cluster. Guides are included for accounting systems, legal systems administration, office systems technology, and retail marketing. Each task analyses guide has the following…

Preparing for High Technology: Successful Co-op Strategies. Research and Development Series No. 263.

ERIC Educational Resources Information Center

Franchak, Stephen J.; Smith, O. H. Michael

This document has been prepared to assist program administrators and practitioners in planning and implementing cooperative (co-op) programs in high technology occupational areas. Information focuses on the key elements, strategies, and procedures of successful co-op programs. The guide contains nine chapters and is based on a review of the…

hm Science Study Skills Program: People, Energy, and Appropriate Technology. Teacher's Guide.

ERIC Educational Resources Information Center

Wilson, Carol; Krasnow, Gary

This program includes 14 activity-oriented units which integrate instruction in science study skills with hands-on learning about energy and appropriate technology. The program is suitable for use in a wide range of science curricula in grades 7 to 10. Units focus on such topics as the meaning of the word "appropriate," what makes…

Township of Ocean School District Contemporary Science. Curriculum Guide, September 1987.

ERIC Educational Resources Information Center

Truex, Ronald T.

This guide was prepared for a program designed to provide non-academic disaffected students as well as college-bound high school students with a meaningful and positive educational experience in science in order to bridge the gap between science and the citizen in a technological world. The program, designed as a full year elective course,…

Evaluator's Guide for Microcomputer-Based Instructional Packages. Developed by MicroSIFT, a Project of the Computer Technology Program. Sixth Revision.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This guide developed by MicroSIFT, a clearinghouse for microcomputer-based educational software and courseware, provides background information and forms to aid teachers and other educators in evaluating available microcomputer courseware. The evaluation process comprises six stages: (1) sifting, which screens out those programs that are not…

Electronic Components, Transducers, and Basic Circuits. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Mowery, Donald R.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed for the purpose of training technicians in the use of electronic instruments and their applications. The program integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology, and…

Industrial Arts Curriculum Guide for Automated Machining in Metals Technology.

ERIC Educational Resources Information Center

1985

This curriculum guide is designed to be used for creating programs in automated machining education in Connecticut. The first sections of the guide are introductory, explaining the importance of computer-numerically controlled machines, describing the industrial arts scope and sequence for kindergarten through adult levels, describing the…

Decisions for Today and Tomorrow: Teaching Notes. Issues in Science-Technology-Society.

ERIC Educational Resources Information Center

Iozzi, Louis A.; Bastardo, Peter J.

This teacher's guide was designed to be used with senior high school level classes as a supplement to existing programs in the areas of science and social studies. Each of the 12 chapters included in the guide may be used independently or may be combined into a separate course on the relationships between science, technology, and society. The…

The NASA "Why?" Files: The Case of the "Wright" Invention. A Lesson Guide with Activities in Mathematics, Science, and Technology.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

This lesson guide for instruction of students in grades 3-5 contains activities in mathematics, science, and technology. The NASA "Why?" Files is a series of instructional programs consisting of broadcast, print, and online elements. Emphasizing standards-based instruction, Problem-Based Learning, and science as inquiry, the series seeks to…

Technology: Manufacturing, Transportation, Construction, Communication.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

The technology-based student activities in this curriculum resource book are intended to be incorporated into any industrial arts/technology education program. The activities are classified according to one of four technological systems--construction, communications, manufacturing, and transportation. Within the four parts of the guide, individual…

Preservice Technology Integration Course Revision: A Conceptual Guide

ERIC Educational Resources Information Center

Ottenbreit-Leftwich, Anne; Glazewski, Krista; Newby, Timothy

2010-01-01

With technology rapidly changing, preservice teacher technology skills improving, and highly qualified teacher licensure requirements, more teacher education programs may need to reevaluate how they are currently teaching technology. Although no empirical evidence recognizes the most effective experience, previous studies have indicated the…

FOOD PROCESSING TECHNOLOGY, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM.

ERIC Educational Resources Information Center

KNOEBEL, ROBERT M.; AND OTHERS

ADMINISTRATORS, ADVISORY COMMITTEES, SUPERVISORS, AND TEACHERS MAY USE THIS GUIDE IN PLANNING AND DEVELOPING NEW PROGRAMS OR EVALUATING EXISTING PROGRAMS IN POST-HIGH SCHOOL FOOD PROCESSING TECHNOLOGY. BASIC MATERIALS WERE PREPARED BY THE STATE UNIVERSITY OF NEW YORK AGRICULTURAL AND TECHNICAL COLLEGE AT MORRISVILLE AND FINAL PREPARATION WAS…

Illinois Occupational Skill Standards: Information Technology End User Applications Cluster.

ERIC Educational Resources Information Center

Illinois Occupational Skill Standards and Credentialing Council, Carbondale.

These skill standards for the information technology end user applications cluster are intended to be a guide to workforce preparation program providers in defining content for their programs and to employers to establish the skills and standards necessary for job acquisition. An introduction provides the Illinois perspective; Illinois…

Data Processing Technology, A Suggested 2-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Central Texas Coll., Killeen.

This guide identifies technicians, states specific job requirements, and describes special problems in defining, initiating, and operating post-high school programs in data processing technology. The following are discussed: (1) the program (employment opportunities, the technician, work performed by data processing personnel, the faculty, student…

Aeronautics: An Educator's Guide with Activities in Science, Mathematics, and Technology Education.

ERIC Educational Resources Information Center

Anderson, Charles; Biggs, Pat; Brown, Deborah; Culivan, Steve; Ellis, Sue; Gerard, James; Hardwick, Ellen; Poff, Norm; Rosenberg, Carla; Shearer, Deborah; Tripp, Octavia; Ernst, Ron

This educator's guide explains basic aeronautical concepts and provides a background in the history of aviation within the context of flight environment (atmosphere, airports, and navigation). The activities in this guide are designed to be uncomplicated and fun. They were developed by NASA Aerospace Education Services Program specialists who have…

Curriculum Guide, C.E.I.T.--Ninth Grade, Transportation Technology. Point Pleasant Junior High School, Point Pleasant, West Virginia, 1977-1978.

ERIC Educational Resources Information Center

Kleine, Richard E.; Hamme, Randall

The result of a curriculum development project known as Project Open, this curriculum guide offers an elective course on transportation systems for ninth graders who are participating in the Career Exploration in Technology (CEIT) program and who have completed the eighth-grade course on manufacturing systems. The course, which spans two…

Drafting and Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This document provides lists of tasks, performance objectives, and enabling objectives for 1,800 hours of postsecondary instruction or 900 hours of secondary instruction in the drafting and design technology program. Following a list of tasks and an explanation of the program, the bulk of the document consists of 25 modules, each of which is a…

ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM: PROTOCOL FOR THE VERIFICATION OF GROUTING MATERIALS FOR INFRASTRUCTURE REHABILITATION AT THE UNIVERSITY OF HOUSTON - CIGMAT

EPA Science Inventory

This protocol was developed under the Environmental Protection Agency's Environmental Technology Verification (ETV) Program, and is intended to be used as a guide in preparing laboratory test plans for the purpose of verifying the performance of grouting materials used for infra...

Surveying Chinese In-Service K12 Teachers' Technology, Pedagogy, and Content Knowledge

ERIC Educational Resources Information Center

Liu, Qingtang; Zhang, Si; Wang, Qiyun

2015-01-01

Technology, pedagogy, and content knowledge (TPACK) has been considered as a promising theoretical framework to guide teacher educators in designing and developing in-service K12 teacher education programs. However, it seems unclear whether in-service teachers have different TPACK perceptions when entering the education programs. This study…

Teaching and Learning Technology and New Media in a Community-Based Program: Adult Educators and Older Learners' Experiences

ERIC Educational Resources Information Center

Hernandez, Regina

2016-01-01

This qualitative case study documented the experiences of two adult educators and four older learners' teaching and learning technology and new media in a community-based program in Texas. The research questions guiding this study included: (1) What can we learn from looking at the educational efforts of a community-based programs offering…

Guide to federal intelligent transportation system (ITS) research.

DOT National Transportation Integrated Search

2013-01-01

The U.S. Department of Transportations (USDOT) Intelligent Transportation System (ITS) Program aims to bring connectivity to transportation through the use of advanced wireless technologies powerful technologies that enable transformative chan...

Environmental contaminants in food. Volume II-part a: working papers. I. Priority setting of toxic substances for guiding monitoring programs. II. Five case studies of environmental food contamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This volume contains working papers written for Office of Technology Assessment (OTA) to assist in preparation of the report Environmental Contaminants in Food. The contents include: (1) Priority setting of toxic substances for guiding monitoring programs; and (2) Five case studies of environmental food contamination.

The NASA "Why?" Files: The Case of the Inhabitable Habitat. A Lesson Guide with Activities in Mathematics, Science, and Technology.

ERIC Educational Resources Information Center

Ricles, Shannon

The National Aeronautics and Space Administration (NASA) has produced a distance learning series of four 60-minute video programs with an accompanying Web site and companion teacher guides. The story lines of each program or episode involve six inquisitive school children who meet in a treehouse. They seek the solution of a particular problem, and…

Implementation Guide of Suggested School-to-Work Career Guidance Strategies for School Personnel and Students.

ERIC Educational Resources Information Center

Vocational Curriculum Resource Center of Maine, Fairfield.

This guide, which is intended to help practitioners replicate two model career guidance programs developed at Portland Arts and Technology High School in Portland, Maine, contains materials for conducting a course titled "Exploring Industry" and a career fair. The first half of the guide begins with coordinator instructions and logistics…

Solar Energy: Instructor Guides, Labs and Tests. First Edition.

ERIC Educational Resources Information Center

Orsak, Charles G., Jr.; And Others

Instructor guides are provided for each of 11 courses in a 2-year associate degree program in solar technology. The semester-length solar courses are broken down into modules which correspond roughly to a 1- to 2-week block of instruction. Each guide presents a course description, course objectives, references for further information, and a…

Computer Oriented Exercises on Attitudes and U.S. Gasoline Consumption, Attitude. Student Guide. Computer Technology Program Environmental Education Units.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This is the student guide in a set of five computer-oriented environmental/energy education units. Contents of this guide present: (1) the three gasoline consumption-reducing options for which attitudes are to be explored; (2) exercises; and (3) appendices including an energy attitudes survey. (MR)

Waste treatability guidance program. User`s guide. Revision 0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Toth, C.

1995-12-21

DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatabilitymore » groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.« less

NASA's Next Generation Launch Technology Program - Strategy and Plans

NASA Technical Reports Server (NTRS)

Hueter, Uwe

2003-01-01

The National Aeronautics and Space Administration established a new program office, Next Generation Launch Technology (NGLT) Program Office, last year to pursue technologies for future space launch systems. NGLT will fund research in key technology areas such as propulsion, launch vehicles, operations and system analyses. NGLT is part of NASA s Integrated Space Technology Plan. The NGLT Program is sponsored by NASA s Office of Aerospace Technology and is part of the Space Launch Initiative theme that includes both NGLT and Orbital Space Plane. NGLT will focus on technology development to increase safety and reliability and reduce overall costs associated with building, flying and maintaining the nation s next-generations of space launch vehicles. These investments will be guided by systems engineering and analysis with a focus on the needs of National customers.

Community Health. Career & Technology Studies. Guide to Standards and Implementation. Interim 1996 (September 1996-September 1997).

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

This document contains materials for teachers to use in presenting the community health strand of the career and technology studies (CTS) program that has been approved for secondary schools in Alberta, Canada. The first three sections outline the philosophy/rationale, organization, and curriculum and assessment standards of the CTS program in…

Inquiry-Based Science and Technology Enrichment Program for Middle School-Aged Female Students

ERIC Educational Resources Information Center

Kim, Hanna

2016-01-01

This study investigates the effects of an intensive 1-week Inquiry-Based Science and Technology Enrichment Program (InSTEP) designed for middle school-aged female students. InSTEP uses a guided/open inquiry approach that is deepened and redefined as eight sciences and engineering practices in the Next Generation Science Standards, which aimed at…

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

Preparing for High Technology: CAD/CAM Programs. Research & Development Series No. 234.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This guide is one of three developed to provide information and resources to assist in planning and developing postsecondary technican training programs in high technology areas. It is specifically intended for vocational-technical educators and planners in the initial stages of planning a specialized training option in computer-aided design (CAD)…

Introduction to Carpentry. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of carpentry is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Introduction to Bricklaying. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of bricklaying is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Technology Education; Engineering Technology and Industrial Technology in California Community Colleges: A Curriculum Guide.

ERIC Educational Resources Information Center

Schon, James F.

In order to identify the distinguishing characteristics of technical education programs in engineering and industrial technology currently offered by post-secondary institutions in California, a body of data was collected by visiting 25 community colleges, 5 state universities, and 8 industrial firms; by a questionnaire sampling of 72 California…

Perspectives on Transportation. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.; And Others

"Perspectives on Transportation" is one of the "Preparing for Tomorrow's World" (PTW) program modules. PTW is an interdisciplinary, future-oriented program which incorporates information from the sciences and social sciences and addresses societal concerns which interface science/technology/society. The program promotes…

The Global Energy Situation on Earth, Teacher Guide. Computer Technology Program Environmental Education Units.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This is the teacher's guide to accompany the student guide which together comprise one of five computer-oriented environmental/energy education units. This unit is organized around a computerized data base of information related to global energy use. The data is organized on a country-by-country basis for the 83 largest countries in the world. For…

Computer Oriented Exercises on Attitudes and U.S. Gasoline Consumption, Attitude. Teacher Guide. Computer Technology Program Environmental Education Units.

ERIC Educational Resources Information Center

Northwest Regional Educational Lab., Portland, OR.

This is the teacher's guide to accompany the student guide which together comprise one of five computer-oriented environmental/energy education units. This unit is concerned with the attitude of people toward gasoline shortages and different steps the government could take to reduce gasoline consumption. Through the exercises, part of which make…

Sciences--Secondaire Deuxieme Cycle: Guide d'enseignement (Teaching Guide for the Second Cycle of Secondary School Science).

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Language Services Branch.

This teachers guide is the French translation of the second cycle for the secondary science curriculum. The document is presented in six sections. The first section provides a historic overview of the secondary school science program that emphasizes the Science, Technology, and Society approach. The second section discusses what the science class…

Introduction to Drywall. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of drywall is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind.…

Introduction to Plumbing. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of plumbing is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in mind.…

Introduction to Sheet Metal. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of sheet metal is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs in…

Future Educators' Explaining Voices

ERIC Educational Resources Information Center

de Oliveira, Janaina Minelli; Caballero, Pablo Buenestado; Camacho, Mar

2013-01-01

Teacher education programs must offer pre-service students innovative technology-supported learning environments, guiding them in the revision of their preconceptions on literacy and technology. This present paper presents a case study that uses podcast to inquiry into future educators' views on technology and the digital age. Results show future…

Neuro-Linguistic Programming: Human Technology for Today’s Air Force.

DTIC Science & Technology

1986-04-01

Part III, pp. 4-5. ’ 26. Ibid, p. 6. 27. Donald W. McCormick, " Neurolinguistic Programming : A Resource Guide and Review of the Research, The 1984...Carol Johnson, " Neurolinguistic Programming --Mystique or Mistake?" Army Organizational Effectiveness Journal, No. 1, 1985, pp. 74-80. 29. Dilts...AD-RI67 836 NEURO-LINGUISTIC PROGRAMMING : HUHAN TECHNOLOGY FOR / TODAY’S AIR FORCEMU AIR COMMAND ANM STAFF COLL NAXHELL AFB AL J B CAULFIELD APR 86

NASA's aircraft icing technology program

NASA Technical Reports Server (NTRS)

Reinmann, John J.

1991-01-01

NASA' Aircraft Icing Technology program is aimed at developing innovative technologies for safe and efficient flight into forecasted icing. The program addresses the needs of all aircraft classes and supports both commercial and military applications. The program is guided by three key strategic objectives: (1) numerically simulate an aircraft's response to an in-flight icing encounter, (2) provide improved experimental icing simulation facilities and testing techniques, and (3) offer innovative approaches to ice protection. Our research focuses on topics that directly support stated industry needs, and we work closely with industry to assure a rapid and smooth transfer of technology. This paper presents selected results that illustrate progress towards the three strategic objectives, and it provides a comprehensive list of references on the NASA icing program.

Future Scenarios in Communications. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.; And Others

"Future Scenarios in Communications" is one of the "Preparing for Tomorrow's World" (PTW) program modules. PTW is an interdisciplinary, future-oriented program incorporating information from the sciences and social sciences and addressing societal concerns which interface science/technology/society. The program promotes…

People and Environmental Changes. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.

"People and Environmental Changes" is one of the "Preparing for Tomorrow's World" (PTW) program modules. PTW is an interdisciplinary, future-oriented program which incorporates information from the sciences and social sciences and addresses societal concerns which interface science/technology/society. The program promotes…

Nuclear Medicine Technology: A Suggested Postsecondary Curriculum.

ERIC Educational Resources Information Center

Technical Education Research Center, Cambridge, MA.

The purpose of this curriculum guide is to assist administrators and instructors in establishing nuclear medicine technician programs that will meet the accreditation standards of the American Medical Association (AMA) Council on Medical Education. The guide has been developed to prepare nuclear medicine technicians (NMT's) in two-year…

Exploring Aeronautics and Space Technology. Teacher Edition.

ERIC Educational Resources Information Center

Buck, Sue; And Others

This curriculum guide contains six units of instruction for an introduction to the technology systems in the National Aeronautics and Space Administration (NASA). Designed to be used either as a stand-alone publication or to be infused into the instruction and activities of an existing technology education program, this publication describes the…

Energy and Environment Guide to Action - Chapter 4.2: Energy Efficiency Programs

EPA Pesticide Factsheets

Provides guidance and recommendations for designing, funding, and implementing effective energy efficiency programs, which provide a range of financial and other incentives to encourage investments in energy-efficient technologies and behavior change.

Of Animals, Nature and People. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.; And Others

"Of Animals, Nature and People" is one of the "Preparing for Tomorrow's World" (PTW) program modules. PTW is an interdisciplinary, future-oriented program incorporating information from the sciences and social sciences and addressing societal concerns which interface science/technology/society. The program promotes responsible…

Enhancing Instruction through Technology.

ERIC Educational Resources Information Center

Greenleaf, Connie; Gee, Mary Kay

Following an introductory section that provides a rationale for using computers in workplace literacy classes, this guide reviews six computer programs and provides activities that teachers can use with the programs in teaching workplace literacy classes. The six computer programs reviewed are as follows: "Grammar Games,""Spell It 3,""The Way…

Aeronautics. An Educator's Guide with Activities in Science, Mathematics, and Technology Education: What Pilot, Astronaut, or Aeronautical Engineer didn't Start out with a Toy Glider?

NASA Technical Reports Server (NTRS)

Biggs, Pat (Editor); Huetter, Ted (Editor)

1998-01-01

Welcome to the exciting world of aeronautics. The term aeronautics originated in France, and was derived from the Greek words for "air" and "to sail." It is the study of flight and the operation of aircraft. This educator guide explains basic aeronautical concepts, provides a background in the history of aviation, and sets them within the context of the flight environment (atmosphere, airports, and navigation). The activities in this guide are designed to be uncomplicated and fun. They have been developed by NASA Aerospace Education Services Program specialists, who have successfully used them in countless workshops and student programs around the United States. The activities encourage students to explore the nature of flight, and experience some real-life applications of mathematics, science, and technology. The subject of flight has a wonderful power to inspire learning.

Practical Arts. Arkansas Public School Course Content Guide.

ERIC Educational Resources Information Center

Arkansas State Dept. of Education, Little Rock.

This guide outlines the basic, developmental, and extension skills that should be covered in practical arts courses (for grades 7 and 8) presented within the framework of agricultural, business, home economics, and industrial arts/technology education programs. The first section lists practical arts skills related to the following areas of…

A users' guide to the trace contaminant control simulation computer program

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various trace contaminant control technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. The results obtained from the program can be useful in assessing different technology combinations, system sizing, system location with respect to other life support systems, and the overall life cycle economics of a trace contaminant control system. The user's manual is extracted in its entirety from NASA TM-108409 to provide a stand-alone reference for using any version of the program. The first publication of the manual as part of TM-108409 also included a detailed listing of version 8.0 of the program. As changes to the code were necessary, it became apparent that the user's manual should be separate from the computer code documentation and be general enough to provide guidance in using any version of the program. Provided in the guide are tips for input file preparation, general program execution, and output file manipulation. Information concerning source code listings of the latest version of the computer program may be obtained by contacting the author.

Measurement, Ratios, and Graphing: Safety First. A Lesson Guide with Activities in Mathematics, Science, and Technology. NASA CONNECT.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

NASA CONNECT is an annual series of free integrated mathematics, science, and technology instructional distance learning programs for students in grades 5-8. Each program has three components: (1) a 30-minute television broadcast which can be viewed live or taped for later use; (2) an interactive Web activity that allows teachers to integrate…

An Exercise in Technology Prioritization in a Competitive Environment

NASA Technical Reports Server (NTRS)

Stephens, Karen L.

2006-01-01

The proper prioritization of technologies within a technology development program is critical for success in a budget constrained environment. A large portfolio of diverse products at differing states of development all competing for program resources presents a need for a process by which a realistic need date can guide the development strategy for each technology. This paper will document an exercise to identify "mission pull" for each technology that can be used to identify the best projected need date for each. This date is then used to back out a development schedule with corresponding funding profile needed to meet the flight opportunity.

Federal Geothermal Research Program Update Fiscal Year 2003

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2004-03-01

The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The following mission and goal statements guide the overall activities of the Office. The goals are: (1) Reduce the levelized cost of generating geothermal power to 3-5 cents per kWh by 2007; (2) Double the number of States with geothermal electric power facilities to eight by 2006; and (3) Supply the electricalmore » power or heat energy needs of 7 million homes and businesses in the United States by 2010. This Federal Geothermal Program Research Update reviews the accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2003. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy. balanced strategy for the Geothermal Program.« less

Introduction to Concrete Masonry. Introduction to Construction Series. Instructor Edition.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This competency-based curriculum guide on the specialty area of concrete masonry is part of the Introduction to Construction series. The series is designed with the flexible training requirements of open shop contractors, preapprenticeship programs, multicraft high school programs, technology education programs, and cooperative education programs…

Technology Education. Career Awareness & Technology Literacy. Alabama Course of Study. Bulletin 1996, No. 20.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

This guide, which is intended for classroom teachers, supervisors, and administrators throughout Alabama, contains the minimum required content (core program) for public school instruction in career awareness and technological literacy in grades 7-10. Presented first are the following: introduction examining the vision and goals of career…

Preparing for High Technology: 30 Steps to Implementation. Research & Development Series No. 232.

ERIC Educational Resources Information Center

Abram, Robert; And Others

This planning guide is one of three that addresses the concerns of postsecondary college administrators and planners regarding the planning and implementation of technician training programs in high technology areas. It specifically focuses on a 30-step planning process that is generalizable to various high technology areas. (The other two…

School Technology Funding Directory: The K-12 Decision Maker's Guide to Federal and Private Funds, 1999-2000. First Edition.

ERIC Educational Resources Information Center

Flowers, Rebecca, Ed.

This sourcebook provides educators with a comprehensive desktop reference to everything they need to identify and acquire funding for school technology programs. It documents hundreds of technology funding sources--federal, state, and local government agencies, corporate foundations, private endowments, and charitable organizations--all concisely…

Inquiry-Based Science and Technology Enrichment Program: Green Earth Enhanced with Inquiry and Technology

ERIC Educational Resources Information Center

Kim, Hanna

2011-01-01

This study investigated the effectiveness of a guided inquiry integrated with technology, in terms of female middle-school students' attitudes toward science/scientists and content knowledge regarding selective science concepts (e.g., Greenhouse Effect, Air/Water Quality, Alternative Energy, and Human Health). Thirty-five female students who were…

[Image guided and robotic treatment--the advance of cybernetics in clinical medicine].

PubMed

Fosse, E; Elle, O J; Samset, E; Johansen, M; Røtnes, J S; Tønnessen, T I; Edwin, B

2000-01-10

The introduction of advanced technology in hospitals has changed the treatment practice towards more image guided and minimal invasive procedures. Modern computer and communication technology opens up for robot aided and pre-programmed intervention. Several robotic systems are in clinical use today both in microsurgery and in major cardiac and orthopedic operations. As this trend develops, professions which are new in this context such as physicists, mathematicians and cybernetic engineers will be increasingly important in the treatment of patients.

Sensor Characteristics Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cree, Johnathan V.; Dansu, A.; Fuhr, P.

The Buildings Technologies Office (BTO), within the U.S. Department of Energy (DOE), Office of Energy Efficiency and Renewable Energy (EERE), is initiating a new program in Sensor and Controls. The vision of this program is: • Buildings operating automatically and continuously at peak energy efficiency over their lifetimes and interoperating effectively with the electric power grid. • Buildings that are self-configuring, self-commissioning, self-learning, self-diagnosing, self-healing, and self-transacting to enable continuous peak performance. • Lower overall building operating costs and higher asset valuation. The overarching goal is to capture 30% energy savings by enhanced management of energy consuming assets and systemsmore » through development of cost-effective sensors and controls. One step in achieving this vision is the publication of this Sensor Characteristics Reference Guide. The purpose of the guide is to inform building owners and operators of the current status, capabilities, and limitations of sensor technologies. It is hoped that this guide will aid in the design and procurement process and result in successful implementation of building sensor and control systems. DOE will also use this guide to identify research priorities, develop future specifications for potential market adoption, and provide market clarity through unbiased information« less

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

Avionics Technology Contract Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Sappe', Hoyt; Squires, Shiela S.

This document reports on Phase I of a project that examined the occupation of avionics technician, established appropriate committees, and conducted task verification. Results of this phase provide the basic information required to develop the program standards and to guide and set up the committee structure to guide the project. Section 1…

DRAWS: Development of Reading and Writing in Social Studies. Teacher's Guide.

ERIC Educational Resources Information Center

Garrahy, Dennis J.

The teacher's guide outlines seven individual social studies units designed to help low achieving students develop reading and writing skills. Following a preface on reading and writing in the content area, material is divided into seven sections which cover the program units on religion, "isms," education, energy, technology, revolution, and…

4-6 Computer Awareness. Interim Guide.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Computer Services Branch.

This guide was developed to assist teachers in achieving goals related to the development of computer awareness in students in grades 4-6 in the Canadian province of Manitoba. An overview of the program describes a set of basic concepts, skills, and attitudes relating to computer technology, and provides information on activities that can be used…

Small Systems. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

ERIC Educational Resources Information Center

Cole, Charles A.

The rehabilitation of existing on-site wastewater treatment facilities is often the best approach to meeting waste disposal needs. Upon completing the learning session described in this instructor's guide, participants should understand the technology and treatment methods for low-volume wastewater flows. These materials are part of the Working…

Guiding Requirements for Designing Life Support System Architectures for Crewed Exploration Missions Beyond Low-Earth Orbit

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Sargusingh, Miriam J.; Toomarian, Nikzad

2016-01-01

The National Aeronautics and Space Administration's (NASA) technology development roadmaps provide guidance to focus technological development in areas that enable crewed exploration missions beyond low-Earth orbit. Specifically, the technology area roadmap on human health, life support and habitation systems describes the need for life support system (LSS) technologies that can improve reliability and in-flight maintainability within a minimally-sized package while enabling a high degree of mission autonomy. To address the needs outlined by the guiding technology area roadmap, NASA's Advanced Exploration Systems (AES) Program has commissioned the Life Support Systems (LSS) Project to lead technology development in the areas of water recovery and management, atmosphere revitalization, and environmental monitoring. A notional exploration LSS architecture derived from the International Space has been developed and serves as the developmental basis for these efforts. Functional requirements and key performance parameters that guide the exploration LSS technology development efforts are presented and discussed. Areas where LSS flight operations aboard the ISS afford lessons learned that are relevant to exploration missions are highlighted.

Dilemmas in Bioethics. Teacher's Guide. Preparing for Tomorrow's World.

ERIC Educational Resources Information Center

Iozzi, Louis A.

"Preparing for Tomorrow's World" is an interdisciplinary, future-oriented program which incorporates information from the sciences and social sciences and addresses societal concerns which interface science/technology/society. The program promotes responsible citizenry with increased abilities in critical thinking, problem-solving,…

Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.

This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of productionmore » builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.« less

MEDICAL LABORATORY ASSISTANT, A SUGGESTED GUIDE FOR A TRAINING PROGRAM.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

INFORMATION IS GIVEN TO ASSIST IN ORGANIZING AND ADMINISTERING A TRAINING PROGRAM FOR MEDICAL LABORATORY ASSISTANTS IN A VARIETY OF SETTINGS AND TO PROVIDE GUIDANCE IN ESTABLISHING NEW PROGRAMS AND IN EVALUATING EXISTING ONES. THE MATERIAL WAS PREPARED UNDER THE DIRECTION OF THE NATIONAL COMMITTEE FOR CAREERS IN MEDICAL TECHNOLOGY. PATHOLOGISTS…

Safety System Design for Technology Education. A Safety Guide for Technology Education Courses K-12.

ERIC Educational Resources Information Center

North Carolina State Dept. of Public Instruction, Raleigh. Div. of Vocational Education.

This manual is designed to involve both teachers and students in planning and controlling a safety system for technology education classrooms. The safety program involves students in the design and maintenance of the system by including them in the analysis of the classroom environment, job safety analysis, safety inspection, and machine safety…

Technical writing in the radiologic technology curriculum.

PubMed

Bell, R

1979-01-01

Although courses in technical writing are no longer suggested in the Curriculum Guide for Programs in Radiologic Technology, the writer believes that writing is essential to the growth of the profession and development of the professional. Emphasis is placed on some of the benefits that accrue to students who are exposed to technical writing as part of their technology curriculum.

Agriscience Technology Education. Preparing for Careers in Agricultural Science, Business, and Technology. Alabama Course of Study. Bulletin 1996, No. 13.

ERIC Educational Resources Information Center

Alabama State Dept. of Education, Montgomery.

This guide, which is intended for classroom teachers, supervisors, and administrators in Alabama, contains the minimum required content (core program) for public school instruction in agriscience technology in grades 7-12. Presented first are the following: introduction examining the mission, purpose, goals, and structure of agriscience technology…

NASA Astrophysics Cosmic Origins (COR) and Physics of the Cosmos (PCOS) Strategic Technology Development Program

NASA Astrophysics Data System (ADS)

Pham, Thai; Seery, Bernard D.

2015-01-01

The COR and PCOS Program Offices (PO) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions.The PO is guided by the National Research Council's 'New Worlds, New Horizons in Astronomy and Astrophysics' Decadal Survey report, and NASA's Astrophysics Implementation Plan. Strategic goals include dark energy; gravitational waves; X-ray observatories, e.g., US participation in ATHENA; Inflation probe; and a large UV/Visible telescope.To date, 51 COR and 65 PCOS SAT proposals have been received, of which 11 COR and 18 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2 that allowed measurement of B-mode polarization in the CMB signal, a possible signature of Inflation; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects. These include five newly selected projects, kicking off in FY 2015.For more information, visit the COR Program website at cor.gsfc.nasa.gov and the PCOS website at pcos.gsfc.nasa.gov.

Test/QA Plan For Verification Of Anaerobic Digester For Energy Production And Pollution Prevention

EPA Science Inventory

The ETV-ESTE Program conducts third-party verification testing of commercially available technologies that improve the environmental conditions in the U.S. A stakeholder committee of buyers and users of such technologies guided the development of this test on anaerobic digesters...

Materials and Processes Technology.

ERIC Educational Resources Information Center

Ritz, John M.; And Others

This instructional resource guide is intended to assist the industrial arts (IA) teacher in implementing a comprehensive materials and Processes Technology program at the technical level in Virginia high schools. The course is designed to help students make informed educational and occupational choices and prepare them for advanced technical or…

Impact of Technology on the Family. Teacher Edition.

ERIC Educational Resources Information Center

Mid-America Vocational Curriculum Consortium, Stillwater, OK.

These instructional materials create an awareness of new technological innovations and how they affect personal and family life. This teacher's guide is for instructing secondary students enrolled in a home economics program. The following introductory information is included: use of this publication, competency profile, instructional/task…

Energy Efficiency for Electrical Technology.

ERIC Educational Resources Information Center

Scharmann, Larry, Ed.

Intended primarily but not solely for use at the postsecondary level, this curriculum guide contains five units on energy efficiency that were designed to be incorporated into an existing program in electrical technology. The following topics are examined: where to look for energy waste; conservation methods for electrical consumers, for…

Horticultural Related Occupations. VEH Horticulture Related. Curriculum Guide for Agribusiness 161.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Dept. of Agricultural Education.

This curriculum guide provides materials for teachers to use in developing a 1- or 2-year course in horticulture-related occupations for at-risk and special education students. It is one of 28 semester courses in agricultural science and technology for Texas high schools. The program prepares low-achieving students with employability skills that…

Science and Engineering Graphics I. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Craig, Jerry; Stapleton, Jerry

This study guide is part of a program of studies entitled Science and Engineering Technician (SET) Curriculum. The SET Curriculum was developed for the purpose of training technicians in the use of electronic instruments and their applications. It integrates elements from the disciplines of chemistry, physics, mathematics, mechanical technology,…

Educating the Public About Health: A Planning Guide. Health Planning Methods and Technology Series.

ERIC Educational Resources Information Center

Sullivan, Daniel

A comprehensive overview of major issues involved in educating the public about health, with emphasis on methods and approaches designed to foster community participation in health planning, is presented in this guide. It is intended to provide ideas for those engaged in health education program development with ideas for use in planning,…

Grain, Feed, Seed, and Farm Supply Technology. A Suggested 2-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

The increasing need for skilled agricultural technicians for the grain, feed, seed, and farm supply industry resulted in preparation of this suggested curriculum guide to aid in planning, developing, and evaluating post-high school programs. The guide includes: (1) suggested course outlines with examples of texts and references, (2) sequence of…

Chemical Science and Technology II. A Study Guide of the Science and Engineering Technician Curriculum.

ERIC Educational Resources Information Center

Ballinger, Jack T.; Wolf, Lawrence J.

This study guide is part of a program of studies entitled the Science and Engineering Technician (SET) Curriculum developed to provide a framework for training technicians in the use of electronic instruments and their applications. This interdisciplinary course of study integrates elements from the disciplines of chemistry, physics, mathematics,…

Innovative and Alternative Technologies. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

ERIC Educational Resources Information Center

Cole, Charles A.

Innovative and alternative methods of wastewater treatment can improve the efficiency and lower the cost of waste treatment procedures. Described in this instructor's guide is a one-hour learning session for citizens interested in improving water quality planning and decision making. Among the topics covered are the need for alternative wastewater…

State Articulated Instructional Objectives Guide for Occupational Education Programs. State Pilot Model for Automotive Mechanics (DCC V-003) and Automotive Mechanics (High School).

ERIC Educational Resources Information Center

North Carolina State Dept. of Community Colleges, Raleigh.

This articulation instructional objective guide for automotive mechanics contains summary information on fifteen blocks (courses) of instruction. They are introduction to automotive technology; lubrication and vehicle operating maintenance; cooling system maintenance and repair; automobile heater maintenance and repair; braking system maintenance…

Advanced Waste Treatment, Wastewater Technology: A Two-Year Post High School Instructional Program. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs. Volume VI.

ERIC Educational Resources Information Center

Gearheart, Robert A.; And Others

This document is one in a series which outlines performance objectives and instructional modules for a course of study which explains the relationship and functions of the process units in a wastewater treatment plant. The modules are arranged in order appropriate for teaching students with no experience. The modules can also be rearranged and…

Technology for the future - Long range planning for space technology development

NASA Technical Reports Server (NTRS)

Collier, Lisa D.; Breckenridge, Roger A.; Llewellyn, Charles P.

1992-01-01

NASA's Office of Aeronautics and Space Technology (OAST) has begun the definition of an Integrated Technology Plan for the civilian space program which guides long-term technology development for space platforms, in light of continuing marker research and other planning data. OAST has conferred particular responsibility for future candidate space mission evaluations and platform performance requirement projections to NASA-Langley. An implementation plan is devised which is amenable to periodic space-platform technology updates.

Dental Laboratory Technology. Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Sappe', Hoyt; Smith, Debra S.

This report provides results of Phase I of a project that researched the occupational area of dental laboratory technology, established appropriate committees, and conducted task verification. These results are intended to guide development of a program designed to train dental laboratory technicians. Section 1 contains general information:…

Instrumentation Technology. Project Report Phase I with Research Findings.

ERIC Educational Resources Information Center

Sappe', Hoyt; Squires, Sheila S.

This report provides results of Phase I of a project that researched the occupational area of instrumentation technology, established appropriate committees, and conducted task verification. These results are intended to guide development of a program designed to train instrumentation technicians. Section 1 contains general information: purpose of…

Uses of Technology in Community Colleges: A Resource Book for Community College Teachers and Administrators.

ERIC Educational Resources Information Center

Gooler, Dennis D., Ed.

This resource guide for community college teachers and administrators focuses on hardware and software. The following are discussed: (1) individual technologies--computer-assisted instruction, audio tape, films, filmstrips/slides, dial access, programmed instruction, learning activity packages, video cassettes, cable TV, independent learning labs,…

Criteria for the Establishment and Maintenance of Two Year Post High School Wastewater Technology Training Programs. Volume I: Program Criteria.

ERIC Educational Resources Information Center

Clemson Univ., SC. Dept. of Environmental Systems Engineering.

This program guide, prepared by representatives from the Environmental Protection Agency, plant operations, vocational-technical schools, professional associations, and universities, is the first of a two-volume series and provides an overall statement of the criteria for the selection of institutions as training facilities for wastewater…

Manager’s Guide to Technology Transition in an Evolutionary Acquisition Environment

DTIC Science & Technology

2005-06-01

program managers, product managers, staffs, and organizations that manage the development , procurement, production, and fielding of systems...rapidly advancing technologies. Technology transitions can occur during the development of systems, or even after a system has been in the field ...Documentation Evolutionary acquisition is an acquisition strategy that defines, develops , produces or acquires, and fields an initial hardware or software

A Resource Curriculum in Broadcast Media. Bulletin No. 8025.

ERIC Educational Resources Information Center

Herian, Roger; Moen, Mary

A resource for teachers who design instructional programs in broadcast media, this curriculum guide consists of eight units which deal with the nature of broadcast media, broadcast programming and public interest, broadcast advertising, broadcast regulation, societal effects of broadcasting, broadcasting and future technology, radio broadcasting,…

Cost as a technology driver. [in aerospace R and D

NASA Technical Reports Server (NTRS)

Fitzgerald, P. E., Jr.; Savage, M.

1976-01-01

Cost managment as a guiding factor in optimum development of technology, and proper timing of cost-saving programs in the development of a system or technology with payoffs in development and operational advances are discussed and illustrated. Advances enhancing the performance of hardware or software advances raising productivity or reducing cost, are outlined, with examples drawn from: thermochemical thrust maximization, development of cryogenic storage tanks, improvements in fuel cells for Space Shuttle, design of a spacecraft pyrotechnic initiator, cost cutting by reduction in the number of parts to be joined, and cost cutting by dramatic reductions in circuit component number with small-scale double-diffused integrated circuitry. Program-focused supporting research and technology models are devised to aid judicious timing of cost-conscious research programs.

Evaluating the Effectiveness of the 2000-2001 NASA "Why?" Files Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Frank, Kari Lou; Ashcroft, Scott B.; Williams, Amy C.

2002-01-01

NASA 'Why?' Files, a research and standards-based, Emmy-award winning series of 60-minute instructional programs for grades 3-5, introduces students to NASA; integrates mathematics, science, and technology by using Problem-Based Learning (PBL), scientific inquiry, and the scientific method; and motivates students to become critical thinkers and active problem solvers. All four 2000-2001 NASA 'Why?' Files programs include an instructional broadcast, a lesson guide, an interactive web site, plus numerous instructional resources. In March 2001, 1,000 randomly selected program registrants participated in a survey. Of these surveys, 185 (154 usable) met the established cut-off date. Respondents reported that (1) they used the four programs in the 2000-2001 NASA 'Why?' Files series; (2) series goals and objectives were met; (3) programs met national mathematics, science, and technology standards; (4) program content was developmentally appropriate for grade level; and (5) programs enhanced/enriched the teaching of mathematics, science, and technology.

Management and Supervision Procedures for Wastewater Facilities, Wastewater Technology: A Two-Year Post High School Instructional Program. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs. Volume IV.

ERIC Educational Resources Information Center

Mason, George J.; And Others

This document is one in a series which outlines performance objectives and instructional modules for a course of study in the management of wastewater treatment plants. The modules are arranged in an order appropriate for teaching students with no experience. The modules can also be rearranged and adapted for courses to upgrade personnel moving…

Process Interaction for Wastewater Facilities, Wastewater Technology: A Two-Year Post High School Instructional Program. An Instructor's Guide for Use of Instructional Material in Wastewater Technology Training Programs. Volume V.

ERIC Educational Resources Information Center

Gearheart, Robert A.; And Others

This document is one in a series which outlines performance objectives and instructional modules for a course of study which explains the relationships and functions of the process units in a wastewater treatment plant. The modules are arranged in an order appropriate for teaching students with no experience. The modules can also be rearranged and…

Computer Service Technician "COMPS." Curriculum Grant 1985.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in computer service technology developed at Schoolcraft College, Livonia, Michigan. The program is designed to give students a strong background in the fundamentals of electricity, electronic devices, and basic circuits (digital and linear). The curriculum includes laboratory demonstrations of the…

Water and Sanitation Technologies: A Trainer's Manual. Training for Development. Peace Corps Information Collection & Exchange Training Manual No. T-32.

ERIC Educational Resources Information Center

Hanson, Bradley D.

This guide, which includes an outline of 222 hours of technical training integrated with training in community organization techniques, is intended for trainers who prepare Peace Corps water and sanitation technicians and engineers for field service. The training program developed by the guide covers these subject areas: community development,…

Articulated, Performance-Based Instruction Objectives Guide for Machine Shop Technology.

ERIC Educational Resources Information Center

Henderson, William Edward, Jr., Ed.

This articulation guide contains 21 units of instruction for two years of machine shop. The objectives of the program are to provide the student with the basic terminology and fundamental knowledge and skills in machining (year 1) and to teach him/her to set up and operate machine tools and make or repair metal parts, tools, and machines (year 2).…

Forum Guide to Ensuring Equal Access to Education Websites: Introduction to Electronic Information Accessibility Standards. NFES 2011-807

ERIC Educational Resources Information Center

National Forum on Education Statistics, 2011

2011-01-01

This guide is designed for use by information technology administrators, data specialists, and program staff responsible for the "content" in data reports, as well as education leaders (e.g., administrators who prioritize tasks for technical and data staff), and other stakeholders who have an interest in seeing that schools, school…

Evaluating the Effectiveness of the 2003-2004 NASA CONNECT(trademark)Program

NASA Technical Reports Server (NTRS)

Caton, Randall H.; Pinelli, Thomas E.; Giersch, Christopher E.; Holmes, Ellen B.; Lambert, Matthew A.

2005-01-01

NASA CONNECT is an Emmy-award-winning series of instructional (distance learning) programs for grades 6-8. Produced by the NASA Center for Distance Learning, the nine programs in the 2003-2004 NASA CONNECT series are research-, inquiry-, standards-, teacher-, and technology-based and include a 30-minute program, an educator guide containing a hands-on activity, and a web-based component. The 1,500 randomly selected NASA CONNECT registered users were invited to complete an electronic (self-reported) survey that employed a 5-point Likert-type scale. Regarding NASA CONNECT, respondents reported that the programs (1) enhance the teaching of mathematics, science, and technology (4.53); (2) are aligned with the national mathematics, science, and technology standards (4.52); (3) raise student awareness of careers requiring mathematics, science, and technology (4.48); (4) demonstrate the application of mathematics, science, and technology (4.47); and (5) present women and minorities performing challenging engineering and science tasks (4.50).

Guide to Writing and Technology across the Curriculum: A Resource for Professors and Student Assistants.

ERIC Educational Resources Information Center

Anstendig, Linda; Richie, Eugene

At Pace University there is a growing concern about the need for reinforcing writing across the disciplines, and about the need for integrating technology into teaching. At Pace a program has been designed in which professors and students working together will be able to take advantage of all that the university has to offer in technology,…

Telescience Testbed Pilot Program

NASA Technical Reports Server (NTRS)

Gallagher, Maria L. (Editor); Leiner, Barry M. (Editor)

1988-01-01

The Telescience Testbed Pilot Program (TTPP) is intended to develop initial recommendations for requirements and design approaches for the information system of the Space Station era. Multiple scientific experiments are being performed, each exploring advanced technologies and technical approaches and each emulating some aspect of Space Station era science. The aggregate results of the program will serve to guide the development of future NASA information systems.

AN EIGHT WEEK SUMMER INSTITUTE TRAINING PROGRAM TO TRAIN INSTRUCTORS OF INSTRUMENTATION TECHNOLOGY.

ERIC Educational Resources Information Center

MCKEE, DELBERT A.

A SUMMER INSTITUTE IN INSTRUMENTATION TECHNOLOGY WAS HELD TO PROVIDE TEACHERS WITH CURRENT KNOWLEDGE ON AUTOMATIC, PROCESS-CONTROL INSTRUMENTATION. A PREVIOUSLY DEVELOPED GUIDE FOR A 2-YEAR, POST-HIGH SCHOOL CURRICULUM PROVIDED THE BASIS FOR INSTRUCTION AND DISCUSSION DURING THE INSTITUTE. THREE COURSES IN MEASUREMENT AND INSTRUMENT SHOP…

Electronics Teacher's Guide. Science and Technology Document Series No. 40.

ERIC Educational Resources Information Center

Lewis, John

This is the second document on the teaching of electronics to appear as part of UNESCO's science and technology education program. An introductory section describes the role that electronics plays as part of the physics curriculum. The following section outlines the content of the electronics course. The outline includes guidelines for determining…

Multi-Media and Technology Tools: Curriculum and Activities for Idaho Business Teachers.

ERIC Educational Resources Information Center

Yopp, Marty; Kitchel, K. Allen; Allen, Tacey

This guide contains information, curriculum, and activities that provide business teachers with a tool for using the World Wide Web, multimedia, and technology to enhance their programs. The opening sections contain the following: computer use policy, multimedia fact sheet, tips on using Netscape Navigator, directory of educational resources on…

Aerospace Technology Curriculum Guide. Invest in Success. Vo. Ed. #260.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This document contains standards for an articulated secondary and postsecondary curriculum in aerospace technology. The curriculum standards can be used to ensure that vocational programs meet the needs of local business and industry. The first part of the document contains a task list and student performance standards for the aerospace technology…

The World of Manufacturing. Industrial Arts Curriculum Project.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Research Foundation.

This textbook for junior high school students encompasses concepts found in manufacturing, and together with a teacher's guide (VT 014 238) and laboratory manual (VT 014 239) constitutes the second part of a 2-year integrated program in industrial technology. This and the first year course in construction technology, were developed under contract…

Adhesives; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

Prepared by participants in the 1968 National Defense Education Act Institute on Wood Technology, this syllabus is one of a series of basic outlines designed to aid college level industrial arts instructors in improving and broadening the scope and content of their programs. The guide is divided into three sections, the first of which deals with…

Advancing Diagnostic Skills for Technology and Engineering Undergraduates: A Summary of the Validation Data

ERIC Educational Resources Information Center

Foster, W. Tad; Shahhosseini, A. Mehran; Maughan, George

2016-01-01

Facilitating student growth and development in diagnosing and solving technical problems remains a challenge for technology and engineering educators. With funding from the National Science Foundation, this team of researchers developed a self-guided, computer-based instructional program to experiment with conceptual mapping as a treatment to…

Federal Geothermal Research Program Update - Fiscal Year 2001

DOE Office of Scientific and Technical Information (OSTI.GOV)

Laney, P.T.

2002-08-31

This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2001. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy.

Small Engine Component Technology (SECT) study. Program report

NASA Technical Reports Server (NTRS)

Almodovar, E.; Exley, T.; Kaehler, H.; Schneider, W.

1986-01-01

The study was conducted to identify high payoff technologies for year 2000 small gas turbine applications and to provide a technology plan for guiding future research and technology efforts. A regenerative cycle turboprop engine was selected for a 19 passenger commuter aircraft application. A series of engines incorporating eight levels of advanced technologies were studied and their impact on aircraft performance was evaluated. The study indicated a potential reduction in fuel burn of 38.3 percent. At $1.00 per gallon fuel price, a potential DOC benefit of 12.5 percent would be achieved. At $2.00 per gallon, the potential DOC benefit would increase to 17.0 percent. Four advanced technologies are recommended and appropriate research and technology programs were established to reach the year 2000 goals.

Benefits and costs of integrating technology into undergraduate nursing programs.

PubMed

Glasgow, Mary Ellen Smith; Cornelius, Frances H

2005-01-01

Advances in technology over the last decade have resulted in increased opportunities for educators to become more innovative in classroom and clinical teaching. These innovations have allowed students and faculty to access essential clinical information at the point of care/need. By capitalizing on technologies such as personal digital assistants and course delivery shells, faculty and students have both portable and remote access to information that can guide practice and learning activities in clinical, classroom, and distance settings. For instance, a student can use a personal digital assistant to research a patient's new medication at the bedside, study course information, access references during class in response to a question, or download clinical materials from home. Although the benefits of having ready access to information seem obvious, there are costs and strategic planning activities associated with implementing these projects. Clearly, the objective of any academic nursing program is to develop skills among students so they can efficiently access information and use that information to guide their nursing practice. To do so, academic nursing administrators must have the forethought to envision how new technologies can support achieving this goal as well as the ability to put in place the infrastructure supports needed for success. This article presents a case study of how one institution developed the necessary infrastructure and garnished the appropriate resources to implement an ambitious technology initiative integrated throughout a large undergraduate nursing program. In addition, how the integration of technology, online and mobile, can enhance clinical learning will be discussed.

Internet for Educators[TM]: A Step-by-Step Guide To Help Educators Understand and Use the Internet. [Videotape].

ERIC Educational Resources Information Center

1996

This 66-minute videotape is part of an ongoing Internet education series, exploring the fascinating resources of the Internet. It is a step-by-step guide demonstrating effective techniques for using the World Wide Web, e-mail, file transfer protocol and other technologies. The program examines the Internet phenomenon from the educator's point of…

Artificial intelligence guides system's best practices, cutting costs and improving services.

PubMed

1999-06-01

One for the history books. Clinical care improvement initiatives guided by a sophisticated artificial intelligence program have helped a major Virginia integrated health system make dramatic improvements in the cost and quality of its health care services. Find out how the technological innovation has earned Sentara Health System a place in the permanent collection of the Smithsonian's National Museum of American History.

Farm and Ranch Mechanical Repair and VEH Farm and Ranch Maintenance. Curriculum Guide for Agribusiness 121. Agricultural Mechanics.

ERIC Educational Resources Information Center

Texas A and M Univ., College Station. Dept. of Agricultural Education.

This curriculum guide provides materials for teachers to use in developing a 1- or 2-year course in agricultural mechanics for at-risk and special education students. It is one of 28 semester courses in agricultural science and technology for Texas high schools. The program prepares low-achieving students with employability skills that are…

Geometry and Algebra: The Future Flight Equation. A Lesson Guide with Activities in Mathematics, Science, and Technology. NASA CONNECT.

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

This activity, part of the NASA CONNECT Series, is designed to help students in grades 6-8 learn how NASA engineers develop experimental aircraft. It consists of an overview of the program, details of the hands-on activity, a series of blackline master student worksheets, teacher materials, and a guide to further resources. (MM)

Microcomputer Software Development: New Strategies for a New Technology.

ERIC Educational Resources Information Center

Kehrberg, Kent T.

1979-01-01

Provides a guide for the development of educational computer programs for use on microcomputers. Making use of the features of microcomputers, including visual, audio, and tactile techniques, is encouraged. (Author/IRT)

Horizons: A Guide to Post-Secondary Education in Ontario, 1983-84. Revised.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

Information is presented on offerings and student costs at colleges of applied arts and technology in Ontario, Canada. These colleges are comprehensive institutions offering primarily diploma programs (2-3 years), and certificate programs (less than 1 year). Credit courses leading toward a diploma may be offered through continuing education on a…

Water Conservation and Reuse. Instructor Guide. Working for Clean Water: An Information Program for Advisory Committees.

ERIC Educational Resources Information Center

Pennsylvania State Univ., Middletown. Inst. of State and Regional Affairs.

Described is a learning session on water conservation intended for citizen advisory groups interested in water quality planning. Topics addressed in this instructor's manual include water conservation needs, benefits, programs, technology, and problems. These materials are components of the Working for Clean Water Project. (Author/WB)

NASA CONNECT: Dancing in the Night Sky. [Videotape].

ERIC Educational Resources Information Center

National Aeronautics and Space Administration, Hampton, VA. Langley Research Center.

NASA CONNECT is a research and standards-based annual series of integrated mathematics, science, and technology instructional distance learning programs for students in grades 6-8. This program has three components: (1) a 30-minute television broadcast which can be viewed live or taped for later use; (2) a companion educator's guide including a…

Computer Communications and Operations--Intermediate, Data Processing Technology: 8025.21.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The following course outline is a guide which presents students with the basic programing and operation concepts for developing the skills necessary to become proficient in the area of computer communications and operation. The student must have met the objectives of Introduction to Computer Programming prior to enrollment in this course. The…

Pre-Service Science and Technology Teachers' Mental Images of Science Teaching

ERIC Educational Resources Information Center

Duban, Nil Yildiz

2013-01-01

Problem Statement: The constructivist reorganization of the elementary education programs in Turkey has revealed the importance of training skilled teachers who are familiar with both constructivist theory and the educational programs. In this way, teachers can adapt to their new roles, learn how to guide students, and prepare the best learning…

High engagement, high quality: A guiding framework for developing empirically informed asynchronous e-learning programs for health professional educators.

PubMed

Sinclair, Peter M; Levett-Jones, Tracey; Morris, Amanda; Carter, Ben; Bennett, Paul N; Kable, Ashley

2017-03-01

E-learning involves the transfer of skills and knowledge via technology so that learners can access meaningful and authentic educational materials. While learner engagement is important, in the context of healthcare education, pedagogy must not be sacrificed for edu-tainment style instructional design. Consequently, health professional educators need to be competent in the use of current web-based educational technologies so that learners are able to access relevant and engaging e-learning materials without restriction. The increasing popularity of asynchronous e-learning programs developed for use outside of formal education institutions has made this need more relevant. In these contexts, educators must balance design and functionality to deliver relevant, cost-effective, sustainable, and accessible programs that overcome scheduling and geographic barriers for learners. This paper presents 10 guiding design principles and their application in the development of an e-learning program for general practice nurses focused on behavior change. Consideration of these principles will assist educators to develop high quality, pedagogically sound, engaging, and interactive e-learning resources. © 2017 John Wiley & Sons Australia, Ltd.

NASA Astrophysics Funds Strategic Technology Development

NASA Astrophysics Data System (ADS)

Seery, Bernard D.; Ganel, Opher; Pham, Bruce

2016-01-01

The COR and PCOS Program Offices (POs) reside at the NASA Goddard Space Flight Center (GSFC), serving as the NASA Astrophysics Division's implementation arm for matters relating to the two programs. One aspect of the PO's activities is managing the COR and PCOS Strategic Astrophysics Technology (SAT) program, helping mature technologies to enable and enhance future astrophysics missions. For example, the SAT program is expected to fund key technology developments needed to close gaps identified by Science and Technology Definition Teams (STDTs) planned to study several large mission concept studies in preparation for the 2020 Decadal Survey.The POs are guided by the National Research Council's "New Worlds, New Horizons in Astronomy and Astrophysics" Decadal Survey report, NASA's Astrophysics Implementation Plan, and the visionary Astrophysics Roadmap, "Enduring Quests, Daring Visions." Strategic goals include dark energy, gravitational waves, and X-ray observatories. Future missions pursuing these goals include, e.g., US participation in ESA's Euclid, Athena, and L3 missions; Inflation probe; and a large UV/Optical/IR (LUVOIR) telescope.To date, 65 COR and 71 PCOS SAT proposals have been received, of which 15 COR and 22 PCOS projects were funded. Notable successes include maturation of a new far-IR detector, later adopted by the SOFIA HAWC instrument; maturation of the H4RG near-IR detector, adopted by WFIRST; development of an antenna-coupled transition-edge superconducting bolometer, a technology deployed by BICEP2/BICEP3/Keck to measure polarization in the CMB signal; advanced UV reflective coatings implemented on the optics of GOLD and ICON, two heliophysics Explorers; and finally, the REXIS instrument on OSIRIS-REx is incorporating CCDs with directly deposited optical blocking filters developed by another SAT-funded project.We discuss our technology development process, with community input and strategic prioritization informing calls for SAT proposals and guiding investment decisions. We also present results of this year's technology gap prioritization and showcase our current portfolio of technology development projects.

The 1995 NASA guide to graduate support

NASA Technical Reports Server (NTRS)

1994-01-01

The future of the United States is in the classrooms of America and tomorrow's scientific and technological capabilities are derived from today's investments in research. In 1980, NASA initiated the Graduate Student Researchers Program (GSRP) to cultivate additional research ties to the academic community and to support promising students pursuing advanced degrees in science and engineering. Since then, approximately 1300 students have completed the program's requirements. In 1987, the program was expanded to include the Underrepresented Minority and Disabled Focus (UMDF) Component. This program was designed to increase participation of underrepresented groups in graduate study and research and, ultimately, in space science and aerospace technology careers. Approximately 270 minority students have completed the program's requirements while making significant contributions to the nation's aerospace efforts. Continuing to expand fellowship opportunities, NASA announced the Graduate Student Fellowships in Global Change Research in 1990. Designed to support the rapid growth in the study of earth as a system, more than 250 fellowships have been awarded. And, in 1992, NASA announced opportunities in the multiagency High Performance Computing and Communications (HPCC) Program designed to accelerate the development and application of massively parallel processing. Approximately five new fellowships will be awarded yearly. This booklet will guide you in your efforts to participate in programs for graduate student support.

Dental Technology. Career Education. DS Manual 2835.1.

ERIC Educational Resources Information Center

Dependents Schools (DOD), Washington, DC.

This guide is designed for use in helping junior and senior high school students explore the field of dental technology as a potential career area. Included in the manual are the following materials: definitions, a key to the organization and numbering code and symbols used in the lists of objectives, lists of general and program objectives with…

Academic Resilience and Achievement: Self-Motivational Resources That Guide Faculty Participation in Instructional Technology Training at a Mexican University

ERIC Educational Resources Information Center

Montero-Hernandez, Virginia; Levin, John; Diaz-Castillo, Maribel

2014-01-01

This study uses narrative analysis to understand the ways in which Mexican university faculty members used their self-motivational resources to persist in an instructional technology training program within adverse work conditions. The methodology included interviews and participant observation. Findings suggest that faculty's academic resilience…

Career and Technology Center Guides Students in Real-Life Careers | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program

Aerodynamic Performance of Scale-Model Turbofan Outlet Guide Vanes Designed for Low Noise

NASA Technical Reports Server (NTRS)

Hughes, Christopher E.

2001-01-01

The design of effective new technologies to reduce aircraft propulsion noise is dependent on an understanding of the noise sources and noise generation mechanisms in the modern turbofan engine. In order to more fully understand the physics of noise in a turbofan engine, a comprehensive aeroacoustic wind tunnel test programs was conducted called the 'Source Diagnostic Test.' The text was cooperative effort between NASA and General Electric Aircraft Engines, as part of the NASA Advanced Subsonic Technology Noise Reduction Program. A 1/5-scale model simulator representing the bypass stage of a current technology high bypass ratio turbofan engine was used in the test. The test article consisted of the bypass fan and outlet guide vanes in a flight-type nacelle. The fan used was a medium pressure ratio design with 22 individual, wide chord blades. Three outlet guide vane design configurations were investigated, representing a 54-vane radial Baseline configuration, a 26-vane radial, wide chord Low Count configuration and a 26-vane, wide chord Low Noise configuration with 30 deg of aft sweep. The test was conducted in the NASA Glenn Research Center 9 by 15-Foot Low Speed Wind Tunnel at velocities simulating the takeoff and approach phases of the aircraft flight envelope. The Source Diagnostic Test had several acoustic and aerodynamic technical objectives: (1) establish the performance of a scale model fan selected to represent the current technology turbofan product; (2) assess the performance of the fan stage with each of the three distinct outlet guide vane designs; (3) determine the effect of the outlet guide vane configuration on the fan baseline performance; and (4) conduct detailed flowfield diagnostic surveys, both acoustic and aerodynamic, to characterize and understand the noise generation mechanisms in a turbofan engine. This paper addresses the fan and stage aerodynamic performance results from the Source Diagnostic Test.

Requirements for Designing Life Support System Architectures for Crewed Exploration Missions Beyond Low-Earth Orbit

NASA Technical Reports Server (NTRS)

Howard, David; Perry,Jay; Sargusingh, Miriam; Toomarian, Nikzad

2016-01-01

NASA's technology development roadmaps provide guidance to focus technological development on areas that enable crewed exploration missions beyond low-Earth orbit. Specifically, the technology area roadmap on human health, life support and habitation systems describes the need for life support system (LSS) technologies that can improve reliability and in-situ maintainability within a minimally-sized package while enabling a high degree of mission autonomy. To address the needs outlined by the guiding technology area roadmap, NASA's Advanced Exploration Systems (AES) Program has commissioned the Life Support Systems (LSS) Project to lead technology development in the areas of water recovery and management, atmosphere revitalization, and environmental monitoring. A notional exploration LSS architecture derived from the International Space has been developed and serves as the developmental basis for these efforts. Functional requirements and key performance parameters that guide the exploration LSS technology development efforts are presented and discussed. Areas where LSS flight operations aboard the ISS afford lessons learned that are relevant to exploration missions are highlighted.

Guide to Federal Funding, Financing, and Technical Assistance for Plug-in Electric Vehicles and Charging Stations

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

The U.S. Department of Energy and the U.S. Department of Transportation have published a guide to highlight examples of federal support and technical assistance for plug-in electric vehicles (PEVs) and charging stations. The guide provides a description of each opportunity and a point of contact to assist those interested in advancing PEV technology. The Department of Energy’s Alternative Fuels Data Center provides a comprehensive database of federal and state programs that support plug-in electric vehicles and infrastructure.

CIVIL TECHNOLOGY, HIGHWAY AND STRUCTURAL OPTIONS, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM. TECHNICAL EDUCATION PROGRAM SERIES, NUMBER 8.

ERIC Educational Resources Information Center

BEAUMONT, JOHN A; AND OTHERS

DESIGNED TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN, DEVELOP, AND EVALUATE PROGRAMS, THIS CURRICULUM GUIDE OFFERS COURSE OUTLINES, PROCEDURES, LABORATORY LAYOUTS, TEXTS AND REFERENCES, LISTS OF LABORATORY EQUIPMENT AND ITS COST, AND A SELECTED LIST OF SCIENTIFIC AND TECHNICAL SOCIETIES. BASIC MATERIALS WERE PREPARED AT THE…

Programming and Operations Lab 1--Intermediate, Data Processing Technology: 8025.23.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The following course outline has been prepared as a guide toward helping the student develop an understanding of operating principles and procedures necessary in processing data electronically. Students who have met the objectives of Designing the Computer Program should be admitted to this course. The class meets 2 hours per day for 90 clock…

Roll Damping Characterisation Program: User Guide

DTIC Science & Technology

2014-06-01

integral to conducting accurate numerical simulations of maritime platforms in support of the Australian Defence Organisation’s capability acquisition...programs and the Royal Australian Navy’s in-theatre operations and through-life capability management. This report provides detailed operational...Research Scientist with the Australian Defence Science and Technology Organisation. After graduating from the University of Tasmania with a Bachelor

Applying Computer Technology to Substance Abuse Prevention Science Results of a Preliminary Examination

ERIC Educational Resources Information Center

Marsch, Lisa A.; Bickel, Warren K.; Badger, Gary J.

2007-01-01

This manuscript reports on the development and evaluation of a computer-based substance abuse prevention program for middle school-aged adolescents, called "HeadOn: Substance Abuse Prevention for Grades 6-8TM". This self-guided program was designed to deliver effective drug abuse prevention science to youth via computer-based educational…

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/industry project designated Intergrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies.

A Guide to Hands-on Science.

ERIC Educational Resources Information Center

Blueford, Joyce R.

1989-01-01

Provides guidelines for a custom-made science program that integrates science, math, and technology. Describes the curriculum which is divided into themes including the applied sciences, cycles of the universe, plate tectonics, rock, water, and life. (Author/RT)

What Works? Common Practices in High Functioning Afterschool Programs across the Nation in Math, Reading, Science, Arts, Technology, and Homework--A Study by the National Partnership. The Afterschool Program Assessment Guide. CRESST Report 768

ERIC Educational Resources Information Center

Huang, Denise; Cho, Jamie; Mostafavi, Sima; Nam, Hannah H.; Oh, Christine; Harven, Aletha; Leon, Seth

2010-01-01

In an effort to identify and incorporate exemplary practices into existing and future afterschool programs, the U.S. Department of Education commissioned a large-scale evaluation of the 21st Century Community Learning Center (CCLC) program. The purpose of this evaluation project was to develop resources and professional development that addresses…

The New Technicians Study: Opportunities for Entry-Level Workers in Information Technology Occupations. Working Paper.

ERIC Educational Resources Information Center

2003

The purpose of this study was to develop a body of labor market information to support the development of regional information technology instructional programs by a consortium of California Community Colleges located in the San Francisco Bay Region. This collection of summaries of six occupations begins with a guide that explains the components…

Long-Term Monitoring of Cased Pipelines Using Longrange Guided-Wave Technique

DOT National Transportation Integrated Search

2009-05-19

Integrity management programs for gas transmission pipelines are required by The Office of Pipeline Safety (OPS)/DOT. Direct Assessment (DA) and 'Other Technologies' have become the focus of assessment options for pipeline integrity on cased crossing...

78 FR 16532 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-15

..., Inc. of Tortola, the British Virgin Islands (collectively, ``Rovi''). 76 FR 79214-5 (Dec. 21, 2011... Group Corp. of Shandong, China (``HGC''); and Haier America of New York, New York (``Haier America'') as...

South Dakota ITS/CVO business plan

DOT National Transportation Integrated Search

1998-01-01

This report defines an ITS/CVO program for the State of South Dakota. It is a Business Plan to guide the deployment of Intelligent Transportation Systems (ITS) technology for improving commercial vehicle operations (CVO) in South Dakota. This ITS/CVO...

ITS/CVO technical project management for non-technical managers : participant guide

DOT National Transportation Integrated Search

1998-09-01

In 1996, the FHWA Office of Motor Carriers (OMC) identified the need to develop a Technical Training Program to support the deployment of Intelligent Transportation System (ITS) technologies for Commercial Vehicle Operations (CVO). The workforce -...

The systematic evolution of a NASA software technology, Appendix C

NASA Technical Reports Server (NTRS)

Deregt, M. P.; Dulfer, J. E.

1972-01-01

A long range program is described whose ultimate purpose is to make possible the production of software in NASA within predictable schedule and budget constraints and with major characteristics such as size, run-time, and correctness predictable within reasonable tolerances. As part of the program a pilot NASA computer center will be chosen to apply software development and management techniques systematically and determine a set which is effective. The techniques will be developed by a Technology Group, which will guide the pilot project and be responsible for its success. The application of the technology will involve a sequence of NASA programming tasks graduated from simpler ones at first to complex systems in late phases of the project. The evaluation of the technology will be made by monitoring the operation of the software at the users' installations. In this way a coherent discipline for software design, production maintenance, and management will be evolved.

Summary of Regional Conferences: Increasing Minority Access to the Licensed Professions through Two-Year College Programs.

ERIC Educational Resources Information Center

State Univ. of New York, Albany. Two Year Coll. Development Center.

In 1984-85, a cooperative project was undertaken in New York to address the issue of minority access to those professions that can be entered through two-year college programs (e.g., animal health technology, certified shorthand reporting, dental hygienist, land surveying, and physical therapist assistant). Project activities were guided by a…

The Laser-Guided Bomb: Case History of a Development

DTIC Science & Technology

1974-06-01

is part of Rand’s R&D and Acquisition Studies Program , supported by tJSAF Project RAND. Previous research done at Rarn has dealt with stu.les of...particular development programs , institutional aspects of Air Force acquisition decisiormaking, and improvements in system acquisition policy wieh respect...Corn- parative Study of Doctrine, Technology, and Organization in the USAF Ballistic and Cruise Missile Programs , 1950-1960, RM-48%3-PR, August 1966

Evaluating the Effectiveness of the 1999-2000 NASA CONNECT Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Frank, Kari Lou

2002-01-01

NASA CONNECT is a standards-based, integrated mathematics, science, and technology series of 30-minute instructional distance learning (satellite and television) programs for students in grades 6-8. Each of the five programs in the 1999-2000 NASA CONNECT series included a lesson, an educator guide, a student activity or experiment, and a web-based component. In March 2000, a mail (self-reported) survey (booklet) was sent to a randomly selected sample of 1,000 NASA CONNECT registrants. A total of 336 surveys (269 usable) were received by the established cut-off date. Most survey questions employed a 5-point Likert-type response scale. Survey topics included (1) instructional technology and teaching, (2) instructional programming and technology in the classroom, (3) the NASA CONNECT program, (4) classroom use of computer technology, and (5) demographics. About 73% of the respondents were female, about 92% identified "classroom teacher" as their present professional duty, about 90% worked in a public school, and about 62% held a master's degree or master's equivalency. Regarding NASA CONNECT, respondents reported that (1) they used the five programs in the 1999-2000 NASA CONNECT series; (2) the stated objectives for each program were met (4.54); (3) the programs were aligned with the national mathematics, science, and technology standards (4.57); (4) program content was developmentally appropriate for grade level (4.17); and (5) the programs in the 1999-2000 NASA CONNECT series enhanced/enriched the teaching of mathematics, science, and technology (4.51).

Evaluating the Effectiveness of the 1998-1999 NASA CONNECT Program

NASA Technical Reports Server (NTRS)

Pinelli, Thomas E.; Frank, Kari Lou; House, Patricia L.

2000-01-01

NASA CONNECT is a standards-based, integrated mathematics, science, and technology series of 30-minute instructional distance learning (satellite and television) programs for students in grades 5-8. Each of the five programs in the 1998-1999 NASA CONNECT series included a lesson, an educator guide, a student activity or experiment, and a web-based component. In March 1999, a mail (self-reported) survey (booklet) was sent to a randomly selected sample of 1,000 NASA CONNECT registrants. A total of 401 surveys (351 usable) were received by the established cut-off date. Most survey questions employed a 5-point Likert-type response scale. Survey topics included: (1) instructional technology and teaching, (2) instructional programming and technology in the classroom, (3) the NASA CONNECT program, (4) classroom use of computer technology, and (5) demographics. About 68% of the respondents were female, about 88% identified "classroom teacher" as their present professional duty, about 75% worked in a public school, and about 67% held a master's degree or master's equivalency. Regarding NASA CONNECT, respondents reported that: (1) they used the five programs in the 1998-1999 NASA CONNECT series; (2) the stated objectives for each program were met (4.49); (3) the programs were aligned with the national mathematics, science, and technology standards (4.61); (4) program content was developmentally appropriate for grade level (4.25); and (5) the programs in the 1998-1999 NASA CONNECT series enhanced/enriched the teaching of mathematics, science, and technology (4.45).

Integration of weather information in transportation management center operations : self-evaluation and planning guide

DOT National Transportation Integrated Search

2008-06-30

The Federal Highway Administrations Road Weather Management Program is helping to reduce the adverse impacts of weather on the transportation system by assisting agencies in integrating weather information and technologies into their daily Transpo...

South Dakota ITS/CVO business plan : executive summary

DOT National Transportation Integrated Search

1998-01-19

This report defines an ITS/CVO program for the State of South Dakota. It is a Business Plan to guide the deployment of Intelligent Transportation Systems (ITS) technology for improving commercial vehicle operations (CVO) in South Dakota. This ITS/CVO...

Staff Development Resources, 1989-90. ITV Connection.

ERIC Educational Resources Information Center

South Carolina State Dept. of Education, Columbia. Office of Instructional Technology.

This staff development resource guide includes listings of television and radio broadcasts categorized by topical emphasis. Television program topics include: administration; adult education; arts; career education; certificate-renewal credit courses; college credit courses; computer education and new technology; custodial training; early…

Experimental Program for the Evaluation of Turbofan/Turboshaft Conversion Technology

DTIC Science & Technology

1982-01-01

Wenzel National Aeronautics and Space Administration Lewis Research Center Cleveland, Ohio 44135 SUMMARY -A TF34 turbofan engine is being modified to...of a Part-Span Variable Inlet Guide Vane on the Performance of a High-Bypass Turbofan Engine . NASA TM 82617, 1981. 5. Nieberding, W. C.; and Pollack...produce shaft power from an output coupling on the fan disk when variable inlet guide vanes are closed to reduce fan airflow. The engine , called a

Inquiry-Based Science and Technology Enrichment Program: Green Earth Enhanced with Inquiry and Technology

NASA Astrophysics Data System (ADS)

Kim, Hanna

2011-12-01

This study investigated the effectiveness of a guided inquiry integrated with technology, in terms of female middle-school students' attitudes toward science/scientists and content knowledge regarding selective science concepts (e.g., Greenhouse Effect, Air/Water Quality, Alternative Energy, and Human Health). Thirty-five female students who were entering eighth grade attended an intensive, 1-week Inquiry-Based Science and Technology Enrichment Program which used a main theme, "Green Earth Enhanced with Inquiry and Technology." We used pre- and post-attitude surveys, pre- and post-science content knowledge tests, and selective interviews to collect data and measure changes in students' attitudes and content knowledge. The study results indicated that at the post-intervention measures, participants significantly improved their attitudes toward science and science-related careers and increased their content knowledge of selected science concepts ( p < .05).

Career and Technology Center Guides Students in Real-Life Careers | Poster

Cancer.gov

By Carolynne Keenan, Contributing Writer Frederick County Public School students have a unique opportunity—a chance to get a real-world, hands-on experience in biomedical science and biotechnology before they even graduate from high school, thanks to the Frederick County Career and Technology Center (CTC). Several years ago, the CTC established its biomedical sciences program with a curriculum from Project Lead the Way (PLTW), a nonprofit, nationwide developer of science, technology, engineering, and mathematics (STEM) education in elementary, middle, and high schools.

Mechanics: Statics; A Syllabus.

ERIC Educational Resources Information Center

Compo, Louis

The instructor's guide presents material for structuring an engineering fundamentals course covering the basic laws of statistics as part of a mechanical technology program. Detailed behavioral objectives are described for the following five areas of course content: principles of mechanics, two-dimensional equilibrium, equilibrium of internal…

Developing internet-based eHealth promotion programs: the Spiral Technology Action Research (STAR) model.

PubMed

Skinner, Harvey A; Maley, Oonagh; Norman, Cameron D

2006-10-01

Health education and health promotion have a tradition of using information and communication technology (ICT). In recent years, the rapid growth of the Internet has created innovative opportunities for Web-based health education and behavior change applications-termed eHealth promotion. However, many eHealth promotion applications are developed without an explicit model to guide the design, evaluation, and ongoing improvement of the program. The spiral technology action research (STAR) model was developed to address this need. The model comprises five cycles (listen, plan, do, study, act) that weave together technological development, community involvement, and continuous improvement. The model is illustrated by a case study describing the development of the Smoking Zine (www.SmokingZine.org), a youth smoking prevention and cessation Web site.

Technology for Analysis of Student Interactions With Complex Programs. Final Report for Period January 1972-February 1973.

ERIC Educational Resources Information Center

Lukas, George; Feurzeig, Wallace

A description is provided of a computer system designed to aid in the analysis of student programing work. The first section of the report consists of an overview and user's guide. In it, the system input is described in terms of a "dribble file" which records all student inputs generated; also an introduction is given to the aids…

Manufacturing Methods and Technology Program Plan. Update.

DTIC Science & Technology

1981-11-01

INDUSTRIAL BASE ENGINEERING ACTIVITY ROCK ISLAND. ILLINOIS 61299 82 INDEX PAGE I. INTRODUCTION The MMT Program Plan Update ........... 1 Industry Guide...obtained from that Plan, extra copies of which are available upon request from the Industrial Base Engineering Activity. Other sources for this data are...Major Subcommands (SUBMACOM’S). The SUBMACOM’S plan, formulate, budget, and execute individual projects. The Industrial Base Engineering Activity

The NASA SCI Files[TM]: The Case of the Shaky Quake. A Lesson Guide with Activities in Mathematics, Science, and Technology.

ERIC Educational Resources Information Center

Ricles, Shannon

The NASA SCI Files is a series of instructional programs consisting of broadcast, print, and online elements emphasizing standards-based instruction, problem-based learning, and science as inquiry. The series seeks to motivate students in grades 3-5 to become critical thinkers and active problem solvers. In this program, the tree house detectives…

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

2002-11-01

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of assisting U.S. independent oil and gas producers make timely, informed technology decisions by providing access to information during Fiscal Year 2002 (FY02). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) and three satellite offices that efficiently extend the program reach. They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and othermore » outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operators and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy with state and industry funding to achieve important goals for all of these sectors. This integrated funding base is combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff to achieve notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact with R&D efforts. The DOE participation is managed through the National Energy Technology Laboratory (NETL), which deploys a national natural gas program via the Strategic Center for Natural Gas (SCNG) and a national oil program through the National Petroleum Technology Office (NTPO). This technical progress report summarizes PTTC's accomplishments during FY02. Activities were maintained at recent record levels. Strategic planning from multiple sources within the framework of the organization gives PTTC the vision to have even more impact in the future. The Houston Headquarters (HQ) location has strived to serve PTTC well in better connecting with producers and the service sector. PTTC's reputation for unbiased bottom line information stimulates cooperative ventures with other organizations. Efforts to build the contact database, exhibit at more trade shows and a new E-mail Technology Alert service are expanding PTTC's audience. All considered, the PTTC network has proven to be an effective way to reach domestic producers locally, regionally and nationally.« less

The impact of care management information technology model on quality of care after percutaneous coronary intervention: "Bridging the Divides".

PubMed

Weintraub, William S; Fanari, Zaher; Elliott, Daniel; Ostertag-Stretch, Jennifer; Muther, Ann; Lynahan, Margaret; Kerzner, Roger; Salam, Tabassum; Scherrer, Herbert; Anderson, Sharon; Russo, Carla A; Kolm, Paul; Steinberg, Terri H

2017-07-03

Reducing readmissions and improving metrics of care are a national priority. Supplementing traditional care with care management may improve outcomes. The Bridges program was an initial evaluation of a care management platform (CareLinkHub), supported by information technology (IT) developed to improve the quality and transition of care from hospital to home after percutaneous coronary intervention (PCI) and reduce readmissions. CareLink is comprised of care managers, patient navigators, pharmacists and physicians. Information to guide care management is guided by a middleware layer to gather information, PLR (ColdLight Solutions, LLC) and presented to CareLink staff on a care management platform, Aerial™ (Medecision). An additional analytic engine [Neuron™ (ColdLight Solutions, LLC)] helps, evaluates and guide care. The "Bridges" program enrolled a total of 2054 PCI patients with 2835 admission from April, 1st 2013 through March 1st, 2015. The data of the program was compared with those of 3691 PCI patients with 4414 admissions in the 3years prior to the program. No impact was seen with respect to inpatient and observation readmission, or emergency department visits. Similarly no change was noticed in LDL control. There was minimal improvement in BP control and only in the CTM-3 and SAQ-7 physical limitation scores in the patients' reported outcomes. Patient follow-up with physicians within 1week of discharge improved during the Bridges years. The CareLink hub platform was successfully implemented. Little or no impact on outcome metrics was seen in the short follow-up time. The Bridges program suggests that population health management must be a long-term goal, improving preventive care in the community. Copyright © 2017 Elsevier Inc. All rights reserved.

Laser Science & Technology Program Annual Report - 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, H-L

2001-03-20

The Laser Science and Technology (LS&T) Program Annual Report 2001 provides documentation of the achievements of the LLNL LS&T Program during the April 2001 to March 2002 period using three formats: (1) an Overview that is a narrative summary of important results for the year; (2) brief summaries of research and development activity highlights within the four Program elements: Advanced Lasers and Components (AL&C), Laser Optics and Materials (LO&M), Short Pulse Laser Applications and Technologies (SPLAT), and High-Energy Laser System and Tests (HELST); and (3) a compilation of selected articles and technical reports published in reputable scientific or technology journalsmore » in this period. All three elements (Annual Overview, Activity Highlights, and Technical Reports) are also on the Web: http://laser.llnl.gov/lasers/pubs/icfq.html. The underlying mission for the LS&T Program is to develop advanced lasers, optics, and materials technologies and applications to solve problems and create new capabilities of importance to the Laboratory and the nation. This mission statement has been our guide for defining work appropriate for our Program. A major new focus of LS&T beginning this past year has been the development of high peak power short-pulse capability for the National Ignition Facility (NIF). LS&T is committed to this activity.« less

An analysis of microsystems development at Sandia National Laboratories

NASA Astrophysics Data System (ADS)

Herrera, Gilbert V.; Myers, David R.

2011-06-01

While Sandia initially was motivated to investigate emergent microsystem technology to miniaturize existing macroscale structures, present designs embody innovative approaches that directly exploit the fundamentally different material properties of a new technology at the micro- and nano-scale. Direct, hands-on experience with the emerging technology gave Sandia engineers insights that not only guided the evolution of the technology but also enabled them to address new applications that enlarged the customer base for the new technology. Sandia's early commitment to develop complex microsystems demonstrated the advantages that early adopters gain by developing an extensive design and process tool kit and a shared awareness of multiple approaches to achieve the multiple goals. As with any emergent technology, Sandia's program benefited from interactions with the larger technical community. However, custom development followed a spiral path of direct trial-and-error experience, analysis, quantification of materials properties at the micro- and nano-scale, evolution of design tools and process recipes, and an understanding of reliability factors and failure mechanisms even in extreme environments. The microsystems capability at Sandia relied on three key elements. The first was people: a mix of mechanical and semiconductor engineers, chemists, physical scientists, designers, and numerical analysts. The second was a unique facility that enabled the development of custom technologies without contaminating mainline product deliveries. The third was the arrival of specialized equipment as part of a Cooperative Research And Development Agreement (CRADA) enabled by the National Competitiveness Technology Transfer Act of 1989. Underpinning all these, the program was guided and sustained through the research and development phases by accomplishing intermediate milestones addressing direct mission needs.

The impact of care management information technology model on quality of care after Coronary Artery Bypass Surgery: "Bridging the Divides".

PubMed

Weintraub, William S; Elliott, Daniel; Fanari, Zaher; Ostertag-Stretch, Jennifer; Muther, Ann; Lynahan, Margaret; Kerzner, Roger; Salam, Tabassum; Scherrer, Herbert; Anderson, Sharon; Russo, Carla A; Kolm, Paul; Steinberg, Terri H

Reducing readmissions and improving metrics of care are a national priority. Supplementing traditional care with care management may improve outcomes. The Bridges program was an initial evaluation of a care management platform (CareLinkHub), supported by information technology (IT) developed to improve the quality and transition of care from hospital to home after Coronary Artery Bypass Surgery (CABG) and reduce readmissions. CareLink is comprised of care managers, patient navigators, pharmacists and physicians. Information to guide care management is guided by a middleware layer to gather information, PLR (ColdLight Solutions, LLC) and presented to CareLink staff on a care management platform, Aerial™ (Medecision). In addition there is an analytic engine to help evaluate and guide care, Neuron™ (Coldlight Solutions, LLC). The "Bridges" program enrolled a total of 716 CABG patients with 850 admissions from April 2013 through March 2015. The data of the program was compared with those of 1111 CABG patients with 1203 admissions in the 3years prior to the program. No impact was seen with respect to readmissions, Blood Pressure or LDL control. There was no significant improvement in patients' reported outcomes using either the CTM-3 or any of the SAQ-7 scores. Patient follow-up with physicians within 1week of discharge improved during the Bridges years. The CareLink hub platform was successfully implemented. Little or no impact on outcome metrics was seen in the short follow-up time. Copyright © 2017 Elsevier Inc. All rights reserved.

Benefit Estimates of Terminal Area Productivity Program Technologies

NASA Technical Reports Server (NTRS)

Hemm, Robert; Shapiro, Gerald; Lee, David; Gribko, Joana; Glaser, Bonnie

1999-01-01

This report documents benefit analyses for the NASA Terminal Area Technology (TAP) technology programs. Benefits are based on reductions in arrival delays at ten major airports over the 10 years from 2006 through 2015. Detailed analytic airport capacity and delay models were constructed to produce the estimates. The goal of TAP is enable good weather operations tempos in all weather conditions. The TAP program includes technologies to measure and predict runway occupancy times, reduce runway occupancy times in bad weather, accurately predict wake vortex hazards, and couple controller automation with aircraft flight management systems. The report presents and discusses the estimate results and describes the models. Three appendixes document the model algorithms and discuss the input parameters selected for the TAP technologies. The fourth appendix is the user's guide for the models. The results indicate that the combined benefits for all TAP technologies at all 10 airports range from $550 to $650 million per year (in constant 1997 dollars). Additional benefits will accrue from reductions in departure delays. Departure delay benefits are calculated by the current models.

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

1998-10-31

In pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions, the Petroleum Technology Transfer Council (PTTC) functions as a cohesive national organization that implements industry's directives through active regional programs. The role of the national headquarters (HQ) organization includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. PTTC relies on 10 Regional Lead Organizations (RLOs) as its main program delivery mechanism to industry. Through its regions, PTTC connects with independent oil and gas producers--through technology workshops, resources centers, websites, newsletters, and other outreach efforts.more » The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY98, and its strategy for achieving further growth in the future.« less

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA"s proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for the develpoment of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Life support technology investment strategies for flight programs: An application of decision analysis

NASA Technical Reports Server (NTRS)

Schlater, Nelson J.; Simonds, Charles H.; Ballin, Mark G.

1993-01-01

Applied research and technology development (R&TD) is often characterized by uncertainty, risk, and significant delays before tangible returns are obtained. Given the increased awareness of limitations in resources, effective R&TD today needs a method for up-front assessment of competing technologies to help guide technology investment decisions. Such an assessment approach must account for uncertainties in system performance parameters, mission requirements and architectures, and internal and external events influencing a development program. The methodology known as decision analysis has the potential to address these issues. It was evaluated by performing a case study assessment of alternative carbon dioxide removal technologies for NASA's proposed First Lunar Outpost program. An approach was developed that accounts for the uncertainties in each technology's cost and performance parameters as well as programmatic uncertainties such as mission architecture. Life cycle cost savings relative to a baseline, adjusted for the cost of money, was used as a figure of merit to evaluate each of the alternative carbon dioxide removal technology candidates. The methodology was found to provide a consistent decision-making strategy for development of new life support technology. The case study results provided insight that was not possible from more traditional analysis approaches.

Systems Engineering in NASA's R&TD Programs

NASA Technical Reports Server (NTRS)

Jones, Harry

2005-01-01

Systems engineering is largely the analysis and planning that support the design, development, and operation of systems. The most common application of systems engineering is in guiding systems development projects that use a phased process of requirements, specifications, design, and development. This paper investigates how systems engineering techniques should be applied in research and technology development programs for advanced space systems. These programs should include anticipatory engineering of future space flight systems and a project portfolio selection process, as well as systems engineering for multiple development projects.

Evaluating Realized Impacts of DOE/EERE R&D Programs. Standard impact evaluation method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ruegg, Rosalie; O'Connor, Alan C.; Loomis, Ross J.

2014-08-01

This document provides guidance for evaluators who conduct impact assessments of research and development (R&D) programs for the U.S. Department of Energy’s (DOE) Office of Energy Efficiency and Renewable Energy (EERE). It is also targeted at EERE program staff responsible for initiating and managing commissioned impact studies. The guide specifies how to estimate economic benefits and costs, energy saved and installed or generated, environmental impacts, energy security impacts, and knowledge impacts of R&D investments in advanced energy technologies.

SMD Technology Development Story for NASA Annual Technology report

NASA Technical Reports Server (NTRS)

Seablom, Michael S.

2017-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community-including the recommendations set forth in the National Research Council (NRC) decadal surveys-and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions-Heliophysics, Earth Science, Planetary Science, and Astrophysics-develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation-e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

Implementation of Health Information Technology in Routine Care for Fibromyalgia: Pilot Study.

PubMed

Sparks, Toni; Kawi, Jennifer; Menzel, Nancy Nivison; Hartley, Kendall

2016-02-01

Fibromyalgia management remains complicated and challenging. Health information technology is an evidence-based, nonpharmacological self and symptom management strategy, but few studies have evaluated its feasibility for managing fibromyalgia patients in clinical practice. FibroGuide is an example of an evidence-based, interactive, and computer-based program comprised of 10 educational modules on fibromyalgia. Study aims were to: (1) develop a process for implementing FibroGuide into the routine care of patients with fibromyalgia, (2) evaluate the overall impact on fibromyalgia before and after a 12-week implementation, and (3) assess patient perspectives on using FibroGuide health information technology to assist in self-management. In this pilot study, 35 participants with fibromyalgia were recruited from an Advanced Practice Registered Nurse's outpatient clinic. Using a descriptive design, quantitative data analysis was employed to address study aims. Based on data collection pre- and post-intervention using paired samples testing, a statistically significant change (p = .017) was observed in overall fibromyalgia impact (improved symptom severity, activity, and function). Majority felt that FibroGuide was helpful as part of their routine care, and nearly half reported that it assisted in their self-management. Although 65% noted that technology was an effective and efficient way to receive education for fibromyalgia management, 57% preferred talking to healthcare providers. Larger longitudinal studies are needed on the use of health information technology in fibromyalgia, evaluating both statistical and clinical significance, while decreasing barriers to participant use for this promising adjunct to clinical management. Providers need to be well educated on supporting self-management strategies and health information technology. Copyright © 2016 American Society for Pain Management Nursing. Published by Elsevier Inc. All rights reserved.

76 FR 46841 - Certain Products Containing Interactive Program Guides and Parental Controls Technology; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-03

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-747] Certain Products Containing.... International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has determined not to review the presiding administrative law judge's (``ALJ'') initial...

Assuring Graduate Competency: A Technology Acceptance Model for Course Guide Tools

ERIC Educational Resources Information Center

Atif, Amara; Richards, Deborah; Busch, Peter; Bilgin, Ayse

2015-01-01

Higher education institutions typically express the quality of their degree programs by describing the qualities, skills, and understanding their students possess upon graduation. One promising instructional design approach to facilitate institutions' efforts to deliver graduates with the appropriate knowledge and competencies is curriculum…

Citizen Science as a REAL Environment for Authentic Scientific Inquiry

ERIC Educational Resources Information Center

Meyer, Nathan J.; Scott, Siri; Strauss, Andrea Lorek; Nippolt, Pamela L.; Oberhauser, Karen S.; Blair, Robert B.

2014-01-01

Citizen science projects can serve as constructivist learning environments for programming focused on science, technology, engineering, and math (STEM) for youth. Attributes of "rich environments for active learning" (REALs) provide a framework for design of Extension STEM learning environments. Guiding principles and design strategies…

Energy Efficiency for Building Construction Technology.

ERIC Educational Resources Information Center

Scharmann, Larry, Ed.

Intended primarily but not solely for use at the postsecondary level, this curriculum guide contains five units of materials on energy efficiency that were designed to be incorporated into an existing program in building construction. The following topics are examined: conservation measures (residential energy use and methods for reducing…

The Solar Dynamics Observatory (SDO) Education and Outreach (E/PO) Program: Changing Perceptions One Program at a Time

NASA Technical Reports Server (NTRS)

Drobnes, Emilie; Littleton, A.; Pesnell, William D.; Beck, K.; Buhr, S.; Durscher, R.; Hill, S.; McCaffrey, M.; McKenzie, D. E.; Myers, D.;

Program management model study

NASA Technical Reports Server (NTRS)

Connelly, J. J.; Russell, J. E.; Seline, J. R.; Sumner, N. R., Jr.

1972-01-01

Two models, a system performance model and a program assessment model, have been developed to assist NASA management in the evaluation of development alternatives for the Earth Observations Program. Two computer models were developed and demonstrated on the Goddard Space Flight Center Computer Facility. Procedures have been outlined to guide the user of the models through specific evaluation processes, and the preparation of inputs describing earth observation needs and earth observation technology. These models are intended to assist NASA in increasing the effectiveness of the overall Earth Observation Program by providing a broader view of system and program development alternatives.

Advanced physical-chemical life support systems research

NASA Technical Reports Server (NTRS)

Evanich, Peggy L.

1988-01-01

A proposed NASA space research and technology development program will provide adequate data for designing closed loop life support systems for long-duration manned space missions. This program, referred to as the Pathfinder Physical-Chemical Closed Loop Life Support Program, is to identify and develop critical chemical engineering technologies for the closure of air and water loops within the spacecraft, surface habitats or mobility devices. Computerized simulation can be used both as a research and management tool. Validated models will guide the selection of the best known applicable processes and in the development of new processes. For the integration of the habitat system, a biological subsystem would be introduced to provide food production and to enhance the physical-chemical life support functions on an ever-increasing basis.

Operations & Maintenance Best Practices - A Guide to Achieving Operational Efficiency (Release 3)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sullivan, Greg; Pugh, Ray; Melendez, Aldo P.

This guide highlights operations and maintenance programs targeting energy and water efficiency that are estimated to save 5% to 20% on energy bills without a significant capital investment. The purpose of this guide is to provide you, the Operations and Maintenance (O&M)/Energy manager and practitioner, with useful information about O&M management, technologies, energy and water efficiency, and cost-reduction approaches. To make this guide useful and to reflect your needs and concerns, the authors met with O&M and Energy managers via Federal Energy Management Program (FEMP) workshops. In addition, the authors conducted extensive literature searches and contacted numerous vendors and industrymore » experts. The information and case studies that appear in this guide resulted from these activities. It needs to be stated at the outset that this guide is designed to provide information on effective O&M as it applies to systems and equipment typically found at Federal facilities. This guide is not designed to provide the reader with step-by-step procedures for performing O&M on any specific piece of equipment. Rather, this guide first directs the user to the manufacturer's specifications and recommendations. In no way should the recommendations in this guide be used in place of manufacturer's recommendations. The recommendations in this guide are designed to supplement those of the manufacturer, or, as is all too often the case, provide guidance for systems and equipment for which all technical documentation has been lost. As a rule, this guide will first defer to the manufacturer's recommendations on equipment operation and maintenance.« less

Simulation: Moving from Technology Challenge to Human Factors Success

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gould, Derek A., E-mail: dgould@liv.ac.uk; Chalmers, Nicholas; Johnson, Sheena J.

2012-06-15

Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used.

Load research manual. Volume 3: Load research for advanced technologies

NASA Astrophysics Data System (ADS)

1980-11-01

Technical guidelines for electric utility load research are presented. Special attention is given to issues raised by the load reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. Special load research procedures are presented for solar, wind, and cogeneration technologies.

The National Shipbuilding Research Program: Contaminated Sediment Management Guide for NSRP Shipyards. Appendix 4: Removal Technologies

DTIC Science & Technology

1999-10-22

la performance technique et environnementale de PAmphibex Journal: Report for Environment Canada-Quebec Region and Environment Quebec Date: Mar 1995...cell. Exceed Set Standards? This demonstration was used to finalize operational and performance standards to be used for the audit of innovative...suspended solids measurements will be performed inside the confined area in order to audit the removal technology. All provisions should be taken to

Packing Up for the Moon: Human Exploration Project Engineering Design Challenge. Design, Build and Evaluate. A Standards-Based Middle School Unit Guide. Engineering By Design: Advancing Technological Literacy--A Standards-Based Program Series

ERIC Educational Resources Information Center

NASA Educator Resource Center at Marshall Space Flight Center, 2007

2007-01-01

The Human Exploration Project (HEP) units have several common characteristics. All units: (1) Are based upon the Technological Literacy standards (ITEA, 2000/2002); (2) Coordinate with Science (AAAS, 1993) and Mathematics standards (NCTM, 2000); (3) Utilize a standards-based development approach (ITEA, 2005); (4) Stand alone and coordinate with…

ChemTechLinks: Alliances for Chemical Technician Education

NASA Astrophysics Data System (ADS)

Nameroff, Tamara

2003-09-01

ChemTechLinks (CTL) is a project of the American Chemical Society (ACS) Educational and International Activities Division and funded by the National Science Foundation to support and advance chemistry-based technician education. The project aims to help improve technician education programs, foster academic-industry alliances, provide professional development opportunities for faculty, and increase student recruitment into chemical technology. The CTL Web site serves as an information clearinghouse and link to other ACS resources and programs, including a Web-based, Voluntary Industry Standards (VIS) database, the Chemistry Technician Program Approval Service, the College Chemistry Consultants Service, summer workshops for high school teachers and two-year college faculty that emphasize a technology-oriented curriculum, scholarships for two-year college faculty to attend ACS Short Courses, a self-study instructional guide for faculty to use in preparing for classroom instruction, and information and free recruitment materials about career opportunities in chemistry technology.

Navy Omni-Directional Vehicle (ODV) development program

NASA Technical Reports Server (NTRS)

Mcgowen, Hillery

1994-01-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

Navy Omni-Directional Vehicle (ODV) development program

NASA Astrophysics Data System (ADS)

McGowen, Hillery

1994-02-01

The Omni-Directional Vehicle (ODV) development program sponsored by the Office of Naval Research at the Coastal Systems Station has investigated the application of ODV technology for use in the Navy shipboard environment. ODV technology as originally received by the Navy in the form of the Cadillac-Gage Side Mover Vehicle was applicable to the shipboard environment with the potential to overcome conditions of reduced traction, ship motion, decks heeled at high angles, obstacles, and confined spaces. Under the Navy program, ODV technology was investigated and a series of experimental vehicles were built and successfully tested under extremely demanding conditions. The ODV drive system has been found to be applicable to autonomous, remotely, or manually operated vehicles. Potential commercial applications include multi-directional forklift trucks, automatic guided vehicles employed in manufacturing environments, and remotely controlled platforms used in nuclear facilities or for hazardous waste clean up tasks.

Evidence-based use of electronic clinical tracking systems in advanced practice registered nurse education: an integrative review.

PubMed

Branstetter, M Laurie; Smith, Lynette S; Brooks, Andrea F

2014-07-01

Over the past decade, the federal government has mandated healthcare providers to incorporate electronic health records into practice by 2015. This technological update in healthcare documentation has generated a need for advanced practice RN programs to incorporate information technology into education. The National Organization of Nurse Practitioner Faculties created core competencies to guide program standards for advanced practice RN education. One core competency is Technology and Information Literacy. Educational programs are moving toward the utilization of electronic clinical tracking systems to capture students' clinical encounter data. The purpose of this integrative review was to evaluate current research on advanced practice RN students' documentation of clinical encounters utilizing electronic clinical tracking systems to meet advanced practice RN curriculum outcome goals in information technology as defined by the National Organization of Nurse Practitioner Faculties. The state of the science depicts student' and faculty attitudes, preferences, opinions, and data collections of students' clinical encounters. Although electronic clinical tracking systems were utilized to track students' clinical encounters, these systems have not been evaluated for meeting information technology core competency standards. Educational programs are utilizing electronic clinical tracking systems with limited evidence-based literature evaluating the ability of these systems to meet the core competencies in advanced practice RN programs.

Flight Avionics Hardware Roadmap

NASA Technical Reports Server (NTRS)

Hodson, Robert; McCabe, Mary; Paulick, Paul; Ruffner, Tim; Some, Rafi; Chen, Yuan; Vitalpur, Sharada; Hughes, Mark; Ling, Kuok; Redifer, Matt;

Photonics: Technology project summary

NASA Technical Reports Server (NTRS)

Depaula, Ramon P.

1991-01-01

Photonics involves the use of light (photons) in conjunction with electronics for applications in communications, computing, control, and sensing. Components used in photonic systems include lasers, optical detectors, optical wave guide devices, fiber optics, and traditional electronic devices. The goal of this program is to develop hybrid optoelectronic devices and systems for sensing, information processing, communications, and control. It is hoped that these new devices will yield at least an order of magnitude improvement in performance over existing technology. The objective of the program is to conduct research and development in the following areas: (1) materials and devices; (2) networking and computing; (3) optical processing/advanced pattern recognition; and (4) sensing.

Real World Connections Through Videoconferences

NASA Technical Reports Server (NTRS)

Peterson, Ruth; Lytle, John (Technical Monitor)

2002-01-01

The Learning Technologies Project (LTP) is a partner in the National Aeronautics and Space Administration's (NASA's) educational technology program unit, an electronic community center that fosters interaction, collaboration, and sharing among educators, learners, and scientists. The goal of the NASA Glenn Research Center's Learning Technologies Project is to increase students' interest and proficiency in mathematics, science, and technology through the use of computing and communications technology and by using NASA's mission in aerospace technology as a theme. The primary components are: (1) Beginner's Guide to Aeronautics, including interactive simulation packages and teacher-created online activities. (2) NASA Virtual Visits, videoconferences (with online pre-post-conference activities) connecting students and teachers to NASA scientists and researchers.

Tour Guide Robots: An Integrated Research and Design Platform to Prepare Engineering and Technology Students

ERIC Educational Resources Information Center

Yelamarthi, Kumar

2016-01-01

Many interesting research and design questions occur at the intersections of traditional disciplines, yet most coursework and research programs for undergraduate engineering students are focused on one discipline. This leads to underutilization of the potential in better preparing students through multidisciplinary projects. Identifying this…

76 FR 76393 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-07

..., including through the use of information technology. Dated: December 2, 2011. Darrin King, Director... Collection: 21st Century Community Learning Centers: Lessons Learned Guides. OMB Control Number: 1875--NEW... Community Learning Centers (21st CCLC) program that will assist the U.S. Department of Education staff in...

Horizons, 1984-1985. A Guide to Post-Secondary Education in Ontario.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

A comprehensive summary of postsecondary educational opportunities in Ontario is presented to assist students in choosing a course of study. After presenting information on student costs and student financial assistance, general information on Colleges of Applied Arts and Technology is provided. For each college, apprenticeship programs, regular…

Horizons, 1985-86. A Guide to Post-Secondary Education in Ontario.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

A comprehensive summary of postsecondary educational opportunities in Ontario is presented to assist students in choosing a course of study. After presenting information on student costs and student financial assistance, general information on Colleges of Applied Arts and Technology is provided. For each college, apprenticeships programs, regular…

A GUIDE FOR USE IN DEVELOPING TRAINING PROGRAMS IN DRAFTING AND DESIGN TECHNOLOGY.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson.

INITIAL COURSE OUTLINES WERE PREPARED BY INSTRUCTORS. INDIVIDUAL COURSES WERE THEN EXPANDED AND COORDINATED WITH OTHER COURSES. THE CURRICULUM LABORATORY STAFF REORGANIZED AND EDITED THE MATERIAL. A COMMITTEE OF INDUSTRIAL REPRESENTATIVES REVIEWED AND PERSONALLY ENDORSED IT AS BEING APPROPRIATE AND ADEQUATE FOR TRAINING DRAFTING AND DESIGN…

77 FR 10533 - Proposed Information Collection Activity; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-22

... employment and public assistance. The guide will be used to interview respondents in order to learn about...; use of public benefit programs and reasons for using or not using specific benefits; their financial... technology. Consideration will be given to comments and suggestions submitted within 60 days of this...

Assessing Adaptive Instructional Design Tools and Methods in ADAPT[IT].

ERIC Educational Resources Information Center

Eseryel, Deniz; Spector, J. Michael

ADAPT[IT] (Advanced Design Approach for Personalized Training - Interactive Tools) is a European project within the Information Society Technologies program that is providing design methods and tools to guide a training designer according to the latest cognitive science and standardization principles. ADAPT[IT] addresses users in two significantly…

78 FR 49766 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Commission...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-15

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-845] Certain Products Containing... a Final Initial Determination Finding No Violation of Section 337 AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has...

The American Association for Laboratory Accreditation

DTIC Science & Technology

2011-03-28

ISO / IEC 17025 ...Information Technology A2LA DoD ELAP Program n All labs are assessed to ISO / IEC 17025 :2005 as the base standard. n In addition, the requirements of 2003...n Inspection Body Accreditation ( ISO / IEC 17020) n Proficiency Testing Providers ( ISO / IEC 17043) n Reference Materials Producers ( ISO Guide

Michigan field artillery's 'Blackjacks' training in Latvia > National Guard

Science.gov Websites

Sustainability Training ARNG Distributed Learning Program Training & Technology Battle Lab (T3BL) Civil Support Simulation Exercises Regional Training Site Maintenance Battle Focused Training Strategy Battle Staff Training Resources News Publications Civic Leader's Guide ARNG Vision 2020 Posture Statement

Soils and Foundations: A Syllabus.

ERIC Educational Resources Information Center

Long, Melvin J.

The teaching guide and course outline for a 12-week course in soils and foundations is designed to help student technicians in a two-year associate degree civil engineering technology program to obtain entry level employment as highway engineering aides, soil testing technicians, soil mappers, or construction inspectors. The seven teaching units…

Cooperative Driver Education and Safety Training. Coordinator's Guide.

ERIC Educational Resources Information Center

Seyfarth, John T.; And Others

Characteristics of the cooperative approach which give this program advantages of low-cost, high-quality, flexible driver-training accessible to more students are: (1) use of technological teaching aids, permitting large class enrollment; (2) shared operating costs and capital investment among cooperating schools or systems; (3) reduced capital…

77 FR 14045 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-08

... Termination of Investigation AGENCY: U.S. International Trade Commission. ACTION: Notice. SUMMARY: Notice is hereby given that the U.S. International Trade Commission has determined on review to modify the presiding administrative law judge's (``ALJ'') initial determination (``ID'') (Order No. 5) granting a joint...

A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial.

PubMed

Pellegrini, Christine A; Duncan, Jennifer M; Moller, Arlen C; Buscemi, Joanna; Sularz, Alyson; DeMott, Andrew; Pictor, Alex; Pagoto, Sherry; Siddique, Juned; Spring, Bonnie

2012-11-30

Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Ninety-six obese adults (BMI 30-39.9 kg/m2) will be randomized to one of three treatment conditions: (1) standard behavioral weight loss (STND), (2) technology-supported behavioral weight loss (TECH); or (3) self-guided behavioral weight loss (SELF). All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD's and will not receive coaching calls. During months 1-6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer). STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. NCT01051713.

Video Games: A Human Factors Guide to Visual Display Design and Instructional System Design

DTIC Science & Technology

1984-04-01

Electronic video games have many of the same technological and psychological characteristics that are found in military computer-based systems. For...both of which employ video games as experimental stimuli, are presented here. The first research program seeks to identify and exploit the...characteristics of video games in the design of game-based training devices. The second program is designed to explore the effects of electronic video display

IPAD: A unique approach to government/industry cooperation for technology development and transfer

NASA Technical Reports Server (NTRS)

Fulton, Robert E.; Salley, George C.

1985-01-01

A key element to improved industry productivity is effective management of Computer Aided Design / Computer Aided Manufacturing (CAD/CAM) information. To stimulate advancement, a unique joint government/industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) was carried out from 1971 to 1984. The goal was to raise aerospace industry productivity through advancement of computer based technology to integrate and manage information involved in the design and manufacturing process. IPAD research was guided by an Industry Technical Advisory Board (ITAB) composed of over 100 representatives from aerospace and computer companies. The project complemented traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer Aided Manufacturing (ICAM) program to advance CAM technology. IPAD had unprecedented industry support and involvement and served as a unique approach to government industry cooperation in the development and transfer of advanced technology. The IPAD project background, approach, accomplishments, industry involvement, technology transfer mechanisms and lessons learned are summarized.

Federal Geothermal Research Program Update Fiscal Year 2002

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2003-09-01

The Department of Energy (DOE) and its predecessors have conducted research and development (R&D) in geothermal energy since 1971. To develop the technology needed to harness the Nation's vast geothermal resources, DOE's Office of Geothermal Technologies oversees a network of national laboratories, industrial contractors, universities, and their subcontractors. The goals are: (1) Double the number of States with geothermal electric power facilities to eight by 2006; (2) Reduce the levelized cost of generating geothermal power to 3-5 cents per kWh by 2007; and (3) Supply the electrical power or heat energy needs of 7 million homes and businesses in themore » United States by 2010. This Federal Geothermal Program Research Update reviews the specific objectives, status, and accomplishments of DOE's Geothermal Program for Federal Fiscal Year (FY) 2002. The information contained in this Research Update illustrates how the mission and goals of the Office of Geothermal Technologies are reflected in each R&D activity. The Geothermal Program, from its guiding principles to the most detailed research activities, is focused on expanding the use of geothermal energy. balanced strategy for the Geothermal Program.« less

Shaping Civic Values in a Technological Age: Public and Private Challenges. Toward a National Dialogue. Conference Report and Discussion Guide on the Jennings Randolph Forum (2nd, Washington, District of Columbia, May 8-10, 1983).

ERIC Educational Resources Information Center

Eisenberg, Diane U., Ed.

Designed as a resource for community program planners and teachers, this publication reports the highlights of a national conference on civic values in the technological age and provides guidelines for planning community discussions on the topic. Following an introduction, four sections of conference highlights are presented in a uniform format:…

Lunar Plant Growth Chamber: Human Exploration Project STS-118 Design Challenge. A Standards-Based High School Unit Guide. Engineering by Design: Advancing Technological Literacy. A Standards-Based Program Series. EP-2007-08-94-MSFC

ERIC Educational Resources Information Center

Caron, Daniel W.; Fuller, Jeremy; Watson, Janice; St. Hilaire, Katherine

2007-01-01

In May 2005, the International Technology Education Association (ITEA) was funded by the National Aeronautics and Space Administration (NASA) to develop curricular units for Grades K-12 on Space Exploration. The units focus on aspects of the themes that NASA Engineers and Scientists--as well as future generations of explorers--must consider, such…

A Program Office Guide to Technology Transfer

DTIC Science & Technology

1988-11-01

Requirements 2-4 2.4.1 Equipment Complexity 2-5 2.4.2 Industrial Capabilities 2-5 2.4.3 Logistics Requirements/Configuration Control 2-5 2.4.4 Schedule...accomplishment of these milestones re- with the leverage of the FSD and production pro- sults in second source full production capability , grams. For more...MANUFACTURING PROCESSES BUILD UP COMPETITIVE PRODUCTION RATE CAPABILITY DURING LOT III Table 1.2-1 AMRAAM Technology Transfer The leader-follower approach is

Moon Munchies: Human Exploration Project Engineering Design Challenge--A Standards-Based Elementary School Model Unit Guide--Design, Build, and Evaluate (Lessons 1-6). Engineering By Design: Advancing Technological Literacy--A Standards-Based Program Series. EP-2007-08-92-MSFC

ERIC Educational Resources Information Center

Weaver, Kim M.

2005-01-01

In this unit, elementary students design and build a lunar plant growth chamber using the Engineering Design Process. The purpose of the unit is to help students understand and apply the design process as it relates to plant growth on the moon. This guide includes six lessons, which meet a number of national standards and benchmarks in…

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Unknown

2000-11-01

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2000 (FY00). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs) who bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors connect with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operatorsmore » and service companies working with the Regional Lead Organizations. The role of the national headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation-wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies. This technical progress report summarizes PTTC's accomplishments during FY00, which lays the groundwork for further growth in the future. At a time of many industry changes and market movements, the organization has built a reputation and expectation to address industry needs of getting information distributed quickly which can impact the bottom line immediately.« less

Management of CAD/CAM information: Key to improved manufacturing productivity

NASA Technical Reports Server (NTRS)

Fulton, R. E.; Brainin, J.

1984-01-01

A key element to improved industry productivity is effective management of CAD/CAM information. To stimulate advancements in this area, a joint NASA/Navy/Industry project designated Integrated Programs for Aerospace-Vehicle Design (IPAD) is underway with the goal of raising aerospace industry productivity through advancement of technology to integrate and manage information involved in the design and manufacturing process. The project complements traditional NASA/DOD research to develop aerospace design technology and the Air Force's Integrated Computer-Aided Manufacturing (ICAM) program to advance CAM technology. IPAD research is guided by an Industry Technical Advisory Board (ITAB) composed of over 100 repesentatives from aerospace and computer companies. The IPAD accomplishments to date in development of requirements and prototype software for various levels of company-wide CAD/CAM data management are summarized and plans for development of technology for management of distributed CAD/CAM data and information required to control future knowledge-based CAD/CAM systems are discussed.

2015 Science Mission Directorate Technology Highlights

NASA Technical Reports Server (NTRS)

Seablom, Michael S.

2016-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the Nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by Agency goals, input from the science community including the recommendations set forth in the National Research Council (NRC) decadal surveys and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions -- Heliophysics, Earth Science, Planetary Science, and Astrophysics -- develops fundamental science questions upon which to base future research and mission programs. Often the breakthrough science required to answer these questions requires significant technological innovation, e.g., instruments or platforms with capabilities beyond the current state of the art. SMD's targeted technology investments fill technology gaps, enabling NASA to build the challenging and complex missions that accomplish groundbreaking science.

A model for mHealth skills training for clinicians: meeting the future now

PubMed Central

Malvey, Donna M.; Neigel, Alexis R.

2017-01-01

We describe the current state of mHealth skills acquisition, education, and training available to clinical professionals in educational programs. We discuss how telemedicine experienced exponential growth due in large part to the ubiquity of the mobile phone. An outcome of this unprecedented growth has been the emergence of the need for technology skills training programs for clinicians that address extant curricula gaps. We propose a model to guide the development of future training programs that incorporate effective training strategies across five domains: (I) digital communication skills; (II) technology literacy and usage skills; (III) deploying telehealth products and services; (VI) regulatory and compliance issues; and (V) telehealth business case. These domains are discussed within the context of interprofessional teams and broader organizational factors. PMID:28736733

A model for mHealth skills training for clinicians: meeting the future now.

PubMed

Slovensky, Donna J; Malvey, Donna M; Neigel, Alexis R

2017-01-01

We describe the current state of mHealth skills acquisition, education, and training available to clinical professionals in educational programs. We discuss how telemedicine experienced exponential growth due in large part to the ubiquity of the mobile phone. An outcome of this unprecedented growth has been the emergence of the need for technology skills training programs for clinicians that address extant curricula gaps. We propose a model to guide the development of future training programs that incorporate effective training strategies across five domains: (I) digital communication skills; (II) technology literacy and usage skills; (III) deploying telehealth products and services; (VI) regulatory and compliance issues; and (V) telehealth business case. These domains are discussed within the context of interprofessional teams and broader organizational factors.

Solar Energy: System Sizing, Design, and Retrofit: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "System Sizing, Design, and Retrofit," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

Industrial America, Social Studies: 6416.13.

ERIC Educational Resources Information Center

Ham, H. Folmar

This guide, one of a series in the Quinmester Program, is intended to aid teachers in grades ten through twelve as they teach students to explore the total effects of industrialization. The elective course encompasses the growth and expansion of American technology, taking into account the role of the government and labor, and the benefits and…

Project T.E.A.M. (Technical Education Advancement Modules). Fundementals of Workplace Integration.

ERIC Educational Resources Information Center

Kraeling, Vicki

This module is one of a series of instructional guides developed by Project TEAM (Technical Education Advancement Modules), a cooperative demonstration program for high technology training for unemployed, underemployed, and existing industrial employees whose basic technical skills are in need of upgrading. The module is a 27-hour overview course…

76 FR 79214 - Certain Products Containing Interactive Program Guide and Parental Controls Technology...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-21

... Systems, Inc. of Tortola, the British Virgin Islands. The complaint alleges violations of section 337.... Box 71, Road Town, Tortola, British Virgin Islands. (b) The respondents are the following entities...: Vizio, Inc., 39 Tesla, Irvine, CA 92618. Haier Group Corp., 1 Haier Road, Hi-Tech Zone, Qingdao...

Air Pollution Technology: A Suggested Two-Year Post High School Curriculum.

ERIC Educational Resources Information Center

Santa Fe Community Coll., Gainesville, FL.

The purpose of this guide is to help school administrators and instructors in planning and developing new programs in the air pollution control field, or in evaluating those in existence. It contains course outlines for technical specialization courses as well as necessary basic science and communication courses. Also included are plans for…

Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…

Metalwork 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area for all students, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in…

Wood Substitutes; A Base Syllabus on Wood Technology.

ERIC Educational Resources Information Center

Eastern Kentucky Univ., Richmond.

This curriculum guide is for use by college instructors concerned with expanding traditional woodworking programs. It was developed in a National Defense Education Act summer institute and is based on an outline provided by members of a previous institute. The content concerns wood substitutes which are made to resemble wood and are often used…

Long before smartphones, National Guard responded to nationwide muster in

Science.gov Websites

Major of the ARNG State Mission Sustainability Training ARNG Distributed Learning Program Training & ; Technology Battle Lab (T3BL) Civil Support Simulation Exercises Regional Training Site Maintenance Battle Focused Training Strategy Battle Staff Training Resources News Publications Civic Leader's Guide ARNG

Massachusetts Air National Guard dad deploys with his son for final time >

Science.gov Websites

Mission Sustainability Training ARNG Distributed Learning Program Training & Technology Battle Lab (T3BL) Civil Support Simulation Exercises Regional Training Site Maintenance Battle Focused Training Strategy Battle Staff Training Resources News Publications Civic Leader's Guide ARNG Vision 2020 Posture

Solar Energy: Energy Conservation and Passive Design Concepts: Student Material. First Edition.

ERIC Educational Resources Information Center

Younger, Charles; Orsak, Charles G., Jr.

Designed for student use in "Energy Conservation and Passive Design Concepts," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, bibliographies, and illustrations for seven course modules. The manual, which corresponds to an instructor guide for the same course, covers the…

Universal Design in Higher Education: From Principles to Practice. Second Edition

ERIC Educational Resources Information Center

Burgstahler, Sheryl E., Ed.

2015-01-01

This second edition of the classic "Universal Design in Higher Education" is a comprehensive, up-to-the-minute guide for creating fully accessible college and university programs. The second edition has been thoroughly revised and expanded, and it addresses major recent changes in universities and colleges, the law, and technology. As…

Teaching Resource Recovery in Science. Resource Recovery Education Program.

ERIC Educational Resources Information Center

National Center for Resource Recovery, Inc., Washington, DC.

This guide, one component of the Resource Recovery Education Kit (see SO 007 866 for a description), contains ideas and activities for teaching about solid waste disposal in secondary level science classes. Among the course objectives are the following: (1) to understand that sufficient technology exists to recover a greater segment of the…

Solar Energy: Materials, Materials Handling, and Fabrication Processes: Student Material. First Edition.

ERIC Educational Resources Information Center

Bolin, William Everet; Orsak, Charles G., Jr.

Designed for student use in "Materials, Materials Handling, and Fabrication Processes," one of 11 courses in a 2-year associate degree program in solar technology, this manual provides readings, exercises, worksheets, bibliographies, and illustrations for 13 course modules. The manual, which corresponds to an instructor guide for the…

Industrial Arts--Metals Technology: A Curriculum Guide for Intermediate and Secondary Level Programs.

ERIC Educational Resources Information Center

Missouri Council for Industrial Arts Education.

The curriculum outline is designed to aid the instructor in developing a more complete course of study, for intermediate and secondary school students, to give the student an understanding of some of the tools, materials, processes, products, occupational opportunities, requirements, and working conditions associated with the metal and metal…

78 FR 66951 - Certain Products Containing Interactive Program Guide and Parental Control Technology; Notice of...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-07

... determines to modify the ALJ's claim construction regarding the order of steps of the asserted claims of the... this investigation. Originally, Complainants asserted numerous claims from seven patents against... patents, as to certain claims of one of the remaining four patents, and as to respondents LGE, Mitsubishi...

Drafting 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in employment after school.…

ATM Technology Demonstration 1 (ATD-1): EcoDemonstrator ASTAR Guided Arrival Research (EAGAR)

NASA Technical Reports Server (NTRS)

Roper, Roy

2015-01-01

In Spring 2013, high level NASA and Boeing management were seeking opportunities to collaborate on a flight test activity involving the ecoDemonstrator. The Airspace Systems Program Office identified FIM as a viable candidate. ATD-1 accepted the challenge. Work began in July for a December 2013 flight test.

Potential high efficiency solar cells: Applications from space photovoltaic research

NASA Technical Reports Server (NTRS)

Flood, D. J.

1986-01-01

NASA involvement in photovoltaic energy conversion research development and applications spans over two decades of continuous progress. Solar cell research and development programs conducted by the Lewis Research Center's Photovoltaic Branch have produced a sound technology base not only for the space program, but for terrestrial applications as well. The fundamental goals which have guided the NASA photovoltaic program are to improve the efficiency and lifetime, and to reduce the mass and cost of photovoltaic energy conversion devices and arrays for use in space. The major efforts in the current Lewis program are on high efficiency, single crystal GaAs planar and concentrator cells, radiation hard InP cells, and superlattice solar cells. A brief historical perspective of accomplishments in high efficiency space solar cells will be given, and current work in all of the above categories will be described. The applicability of space cell research and technology to terrestrial photovoltaics will be discussed.

Fan Noise Reduction: An Overview

NASA Technical Reports Server (NTRS)

Envia, Edmane

2001-01-01

Fan noise reduction technologies developed as part of the engine noise reduction element of the Advanced Subsonic Technology Program are reviewed. Developments in low-noise fan stage design, swept and leaned outlet guide vanes, active noise control, fan flow management, and scarfed inlet are discussed. In each case, a description of the method is presented and, where available, representative results and general conclusions are discussed. The review concludes with a summary of the accomplishments of the AST-sponsored fan noise reduction research and a few thoughts on future work.

Load research manual. Volume 3. Load research for advanced technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brandenburg, L.; Clarkson, G.; Grund, Jr., C.

1980-11-01

This three-volume manual presents technical guidelines for electric utility load research. Special attention is given to issues raised by the load data reporting requirements of the Public Utility Regulatory Policies Act of 1978 and to problems faced by smaller utilities that are initiating load research programs. The manual includes guides to load research literature and glossaries of load research and statistical terms. In Volume 3, special load research procedures are presented for solar, wind, and cogeneration technologies.

Conference Proceedings on Guidance and Control Techniques for Advanced Space Vehicles (37th) Held at Florence, Italy on 27-30 September 1983.

DTIC Science & Technology

1984-01-01

P AD-A14l 969 CONFERENCE PROCEEDINGS ON GUIDANCE AND CONTROL 1 TECHNIQUES FOR ADVANCED SP-.(U,) ADVISORY GROUP FOR AEROSPACE RESEARCH AND DEVELOPMENT...findings of these various planning groups relativie to the ’e for advanced controls technology, and the perceived status of the technology t. me-,t... control of large flexible spacecraft. The program has also involved experimental activities to guide Ind validate the theoretical work. The

Computer Access. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Council for Exceptional Children, Reston, VA. Center for Special Education Technology.

One of nine brief guides for special educators on using computer technology, this guide focuses on access including adaptations in input devices, output devices, and computer interfaces. Low technology devices include "no-technology" devices (usually modifications to existing devices), simple switches, and multiple switches. High technology input…

Girls Entering Technology, Science, Math and Research Training (get Smart): a Model for Preparing Girls in Science and Engineering Disciplines

NASA Astrophysics Data System (ADS)

Mawasha, P. Ruby; Lam, Paul C.; Vesalo, John; Leitch, Ronda; Rice, Stacey

In this article, it is postulated that the development of a successful training program for women in science, math, engineering, and technology (SMET) disciplines is dependent upon a combination of several factors, including (a) career orientation: commitment to SMET as a career, reasons for pursuing SMET as a career, and opportunity to pursue a SMET career; (b) knowledge of SMET: SMET courses completed, SMET achievement, and hands-on SMET activities; (c) academic and social support: diversity initiatives, role models, cooperative learning, and peer counseling; and (d) self-concept: program emphasis on competence and peer competition. The proposed model is based on the GET SMART (Girls Entering Technology, Science, Math and Research Training) workshop program to prepare and develop female high school students as competitive future SMET professionals. The proposed model is not intended to serve as an elaborate theory, but as a general guide in training females entering SMET disciplines.

Review of German work on controlled re-entry technology

NASA Astrophysics Data System (ADS)

Wuest, Walter

The concept of a reusable space transporter formed a focus of much effort for the German firms Junkers Flugzeug- und Motorenwerke (JFM), Messerschmitt-Bölkow-Blohm und Voss (MBB) and Entwicklungsring Nord (ERNO), together with the Deutsche Forschungs- und Veruchsanstalt für Luft- und Raumfahrt (DFVLR) and different University institutes during the decade beginning 1962. The result was the definition, in 1972, of a program of the “Arbeitsgruppe Rückkehrtechnologie” (ART, Working group for reentry technology) which integrated all relevant capacities of research establishments, industry, and universities. The aim was the maintenance of the technical-scientific capabilities for advanced high velocity flight systems and to qualify for international cooperation in this field. Only a small part of this work could be completed, as the ART-program was never accepted by the German Ministry for Research and Technology. So the current work was stopped by the end of 1975. Nevertheless, as the ART-program can serve as a guide-line for possible future work a summary of this work is given.

2007 Solar Decathlon: Powered by the Sun (Competition Program)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

2007-09-01

The 2007 Solar Decathlon Competition Program is distributed to Solar Decathlon visitors, media, sponsors, and the student competitors. It contains basic facts about the Solar Decathlon: what, where, when, who, and how. It is a guide for visitors to the events and workshops. It describes the 10 contests and the technologies used in the houses. It celebrates the accomplishments of the competitors and provides an opportunity for the major sponsors to describe their roles and relay their commitment to the ideals of the Solar Decathlon.

Application of the MAFFT sequence alignment program to large data—reexamination of the usefulness of chained guide trees

PubMed Central

Yamada, Kazunori D.; Tomii, Kentaro; Katoh, Kazutaka

2016-01-01

Motivation: Large multiple sequence alignments (MSAs), consisting of thousands of sequences, are becoming more and more common, due to advances in sequencing technologies. The MAFFT MSA program has several options for building large MSAs, but their performances have not been sufficiently assessed yet, because realistic benchmarking of large MSAs has been difficult. Recently, such assessments have been made possible through the HomFam and ContTest benchmark protein datasets. Along with the development of these datasets, an interesting theory was proposed: chained guide trees increase the accuracy of MSAs of structurally conserved regions. This theory challenges the basis of progressive alignment methods and needs to be examined by being compared with other known methods including computationally intensive ones. Results: We used HomFam, ContTest and OXFam (an extended version of OXBench) to evaluate several methods enabled in MAFFT: (1) a progressive method with approximate guide trees, (2) a progressive method with chained guide trees, (3) a combination of an iterative refinement method and a progressive method and (4) a less approximate progressive method that uses a rigorous guide tree and consistency score. Other programs, Clustal Omega and UPP, available for large MSAs, were also included into the comparison. The effect of method 2 (chained guide trees) was positive in ContTest but negative in HomFam and OXFam. Methods 3 and 4 increased the benchmark scores more consistently than method 2 for the three datasets, suggesting that they are safer to use. Availability and Implementation: http://mafft.cbrc.jp/alignment/software/ Contact: katoh@ifrec.osaka-u.ac.jp Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27378296

Solar Sail Models and Test Measurements Correspondence for Validation Requirements Definition

NASA Technical Reports Server (NTRS)

Ewing, Anthony; Adams, Charles

2004-01-01

Solar sails are being developed as a mission-enabling technology in support of future NASA science missions. Current efforts have advanced solar sail technology sufficient to justify a flight validation program. A primary objective of this activity is to test and validate solar sail models that are currently under development so that they may be used with confidence in future science mission development (e.g., scalable to larger sails). Both system and model validation requirements must be defined early in the program to guide design cycles and to ensure that relevant and sufficient test data will be obtained to conduct model validation to the level required. A process of model identification, model input/output documentation, model sensitivity analyses, and test measurement correspondence is required so that decisions can be made to satisfy validation requirements within program constraints.

Thrust Area Report, Engineering Research, Development and Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Langland, R. T.

1997-02-01

The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Programmore » has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.« less

You...as Blood Donor: Teacher Strategies and Student Worksheets.

ERIC Educational Resources Information Center

Degroat, Diane Zagare; And Others

This curriculum guide for teaching about blood donation was prepared to improve school-community participation in the New York City Blood Donor Program. It contains plans for five lessons on the following topics: (1) the nature of blood; (2) blood and technology--modern-day advances; (3) blood and your personal health; (4) the blood donor as good…

Multi Media Madness--Improving Professional Development for Instructional Technology

ERIC Educational Resources Information Center

Thibeault, Nancy

2004-01-01

Multi Media Madness (3Ms) was a faculty development program where participants were guided by mentors through the development of a multimedia project. Nine faculty participants attended a week long workshop session in June 2003 taught by three mentors. At the end of the workshop series, the participants submitted a project plan that was reviewed,…

MECHANICAL TECHNOLOGY, DESIGN AND PRODUCTION, A SUGGESTED 2-YEAR POST HIGH SCHOOL CURRICULUM.

ERIC Educational Resources Information Center

Office of Education (DHEW), Washington, DC.

THE PURPOSE OF THIS CURRICULUM GUIDE IS TO ASSIST ADMINISTRATORS, SUPERVISORS, AND TEACHERS TO PLAN AND DEVELOP 2-YEAR POST-SECONDARY EDUCATION PROGRAMS IN MECHANICAL DESIGN AND PRODUCTION. TECHNICAL MATERIALS WERE DEVELOPED BY AN INSTITUTE STAFF FOR THE WISCONSIN STATE BOARD FOR VOCATIONAL EDUCATION UNDER CONTRACT TO THE U.S. OFFICE OF EDUCATION…

A Guide to the Management of Curriculum Materials Centers for the 21st Century: The Promise and the Challenge.

ERIC Educational Resources Information Center

Carr, Jo Ann, Ed.

Curriculum Materials Centers (CMCs), resource centers that support teacher education programs, are facing many challenges, including maintaining funding, meeting increased expectations, and coping with changes in technology. This volume covers a wide range of management issues from the perspective of 18 librarians, including practical advice on…

Engaging Education: Integrating Work, Technology and Learning for Adults.

ERIC Educational Resources Information Center

Department of Housing and Urban Development, Washington, DC.

This guide is for Neighborhood Networks center staff and volunteers who want to learn how centers across the country are helping adults meet work force demands. It provides resources to work force development programs so examples can be tailored to meet the needs of other communities. It focuses on challenges that integrating academics and job…

The Department of Defense Very High Speed Integrated Circuit (VHSIC) Technology Availability Program Plan for the Committees on Armed Services United States Congress.

DTIC Science & Technology

1986-06-30

features of computer aided design systems and statistical quality control procedures that are generic to chip sets and processes. RADIATION HARDNESS -The...System PSP Programmable Signal Processor SSI Small Scale Integration ." TOW Tube Launched, Optically Tracked, Wire Guided TTL Transistor Transitor Logic

How Well Do Western Concepts of Instructional Development (ID) and Technology Transfer to Non-Industrialized Nations. Symposium.

ERIC Educational Resources Information Center

Reid, Una V.

A self-instructional slide/tape program entitled "Idiopathic Scoliosis: Guide for Teaching Parents, Children and Health Care Personnel" was created for an audience of nurse-trainees, physicians, and laypeople in British Columbia, Canada. Designed to assist these groups in understanding the nature, history, and treatment of the disease,…

Environmental Quality Technology Demonstration, Evaluation and Transfer Activities

DTIC Science & Technology

1996-12-02

and Appropriate Requirements) and ARAR support documentation for interim and final Installation Restoration Program (IRP) remedial actions . During the...Relevant and Appropriate Requirements (ARARs) for Fort Devens , Massachusetts. Delivered Federal Environmental Legislative Power Curve in hard copy and... Remedial Actions . Delivered revised tables for Desk Guide on Interpretation of Applicable or Relevant and Appropriate Requirements — Interim Draft

Electricity/Electronics 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in employment after school.…

Power Mechanics 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in employment after school.…

Introduction to Machine Tool Technology, Machine Shop Work--Intermediate: 9555.01.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons programmed to meet the necessary training needed by the machine shop student. A beginning course, the four blocks of instruction contained in the outline are designed to enable the student to obtain the manipulative…

Bench Work and Support Operations, Machine Shop Work--Intermediate: 9555.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons programmed to meet the necessary training needed by the machine shop student who has completed an introductory course in machine tool technology. The five blocks of instruction contained in this outline are designed to…

Distributed utility technology cost, performance, and environmental characteristics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wan, Y; Adelman, S

1995-06-01

Distributed Utility (DU) is an emerging concept in which modular generation and storage technologies sited near customer loads in distribution systems and specifically targeted demand-side management programs are used to supplement conventional central station generation plants to meet customer energy service needs. Research has shown that implementation of the DU concept could provide substantial benefits to utilities. This report summarizes the cost, performance, and environmental and siting characteristics of existing and emerging modular generation and storage technologies that are applicable under the DU concept. It is intended to be a practical reference guide for utility planners and engineers seeking informationmore » on DU technology options. This work was funded by the Office of Utility Technologies of the US Department of Energy.« less

Comparison of the effects of mobile technology AAC apps on programming visual scene displays.

PubMed

Caron, Jessica; Light, Janice; Davidoff, Beth E; Drager, Kathryn D R

2017-12-01

Parents and professionals who work with individuals who use augmentative and alternative communication (AAC) face tremendous time pressures, especially when programming vocabulary in AAC technologies. System design (from programming functions to layout options) necessitates a range of skills related to operational competence and can impose intensive training demands for communication partners. In fact, some AAC applications impose considerable learning demands, which can lead to increased time to complete the same programming tasks. A within-subject design was used to investigate the comparative effects of three visual scene display AAC apps (GoTalk Now, AutisMate, EasyVSD) on the programming times for three off-line programming activities, by adults who were novices to programming AAC apps. The results indicated all participants were able to create scenes and add hotspots during off-line programming tasks with minimal self-guided training. The AAC app that had the least number of programming steps, EasyVSD, resulted in the fastest completion times across the three programming tasks. These results suggest that by simplifying the operational requirements of AAC apps the programming time is reduced, which may allow partners to better support individuals who use AAC.

Incorporating tailored interactive patient solutions using interactive voice response technology to improve statin adherence: results of a randomized clinical trial in a managed care setting.

PubMed

Stacy, Jane N; Schwartz, Steven M; Ershoff, Daniel; Shreve, Marilyn Standifer

2009-10-01

The current study presents the impact of a behavior change program to increase statin adherence using interactive voice response (IVR) technology. Subjects were affiliated with a large health benefit company, were prescribed a statin (index) and had no lipid-lowering pharmacy claims in the previous 6 months, and were continuously enrolled in the plan for 12 months prior and 6 months post index statin. Potential subjects (1219) were contacted by the IVR system; 497 gave informed consent. Subjects were asked to respond to 15 questions from the IVR that were guided by several behavior change theories. At the conclusion of the questions, subjects were randomly assigned to either a control group (n = 244), who received generic feedback at the conclusion of the call and were then mailed a generic cholesterol guide, or an experimental group (n = 253), who received tailored feedback based on their cholesterol-related knowledge, attitudes, beliefs, and perceived barriers to medication adherence, and were mailed a tailored guide that reinforced similar themes. Subjects in the experimental group had the opportunity to participate in 2 additional tailored IVR support calls. The primary dependent variable was 6-month point prevalence, defined as claims evidence of a statin on days 121-180 post index statin. Subjects in the experimental group had a significantly higher 6-month point prevalence than the controls (70.4% vs. 60.7%, P < 0.05). Results of this study suggest that a behavioral support program using IVR technology can be a cost-effective modality to address the important public health problem of patient nonadherence with statin medication.

Is technology assisted guided self-help successful in treating female adolescents with bulimia nervosa?

PubMed

Wagner, Gudrun; Wagner, Gudrun; Penelo, Eva; Nobis, Gerald; Mayerhofer, Anna; Schau, Johanna; Spitzer, Marion; Imgart, Hartmut; Karwautz, Andreas

2013-01-01

This study aims to evaluate the long-term outcome of new technology assisted guided self-help in adolescents with bulimia nervosa (BN). One hundred and twenty-six patients with BN (29 adolescents and 97 adults) were randomly allocated to a cognitive behavioural therapy-based self-help program delivered by the Internet or bibliotherapy, both accompanied by e-mail guidance. Outcomes were assessed at baseline, month 4, 7 and 18 including remission rates and eating disorder associated psychopathology. In all, 44% of adolescents vs. 38.7% of adults were in remission at month 7, and 55% of adolescents vs. 62.5% of adults were in remission at follow-up. Objective binge eating and compensatory behaviour improved significantly over time in both groups, with the highest decrease during the first 4 months. A significant decrease over time and no group differences have been found in almost all EDI-2 subscales. E-mail guided self-help (delivered via the Internet or bibliotherapy) is equally effective for adolescents as for adults with BN, and can be recommended as an initial step of treatment for this younger age group.

Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube

DTIC Science & Technology

2017-06-01

other documentation. TITLE: Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube REPORT DOCUMENTATION...TITLE AND SUBTITLE Development and Technology Transfer of the Syncro Blue Tube (Gabriel) Magnetically Guided Feeding Tube 5a. CONTRACT NUMBER W81XWH-09-2...Technical Abstract: Further Development and Technology Transfer of the Syncro BLUETUBE™ (Gabriel) Magnetically Guided Feeding Tube. New Primary

A Resource Guide Identifying Technology Tools for Schools. Appendix

ERIC Educational Resources Information Center

Fox, Christine; Jones, Rachel

2009-01-01

SETDA and NASTID's "Technology Tools for Schools Resource Guide" provides definitions of key technology components and relevant examples, where appropriate as a glossary for educators. The guide also presents essential implementation and infrastructure considerations that decision makers should think about when implementing technology in schools.…

Study on Construction Technology Standardization of Primary Guide Rope Laying by Multi-rotor Aircraft in Stringing Construction of Transmission Line

NASA Astrophysics Data System (ADS)

Liu, Chen; Tang, Guang-Rui; Jiang, Ming; Dong, Yu-Ming

2017-09-01

According to the practical situation of stringing construction for Ultra High Voltage (UHV) overhead transmission line, construction technology standardization of primary guide rope laying by multi-rotor aircraft is studied. This paper mainly focuses on the construction preparation, test flight and technology of laying primary guide rope. The summary of the construction technology standardization of primary guide rope laying by multi-rotor aircraft in stringing construction are useful in further guiding practical construction of transmission line.

Development and Testing of a New Family of Supersonic Decelerators

NASA Technical Reports Server (NTRS)

Clark, Ian G.; Adler, Mark; Rivellini, Tommaso P.

2013-01-01

The state of the art in Entry, Descent, and Landing systems for Mars applications is largely based on technologies developed in the late 1960's and early 1970's for the Viking Lander program. Although the 2011 Mars Science Laboratory has made advances in EDL technology, these are predominantly in the areas of entry (new thermal protection systems and guided hypersonic flight) and landing (the sky crane architecture). Increases in entry mass, landed mass, and landed altitude beyond MSL capabilities will require advances predominantly in the field of supersonic decelerators. With this in mind, a multi-year program has been initiated to advance three new types of supersonic decelerators that would enable future large-robotic and human-precursor class missions to Mars.

Missouri Introduction to Energy and Power Technology Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide provides materials for the first high school specialization course beyond the broad-based foundation provided by the Introduction to Industrial Technology and Exploration of Technology courses. Section I is the Instructor's Guide, which contains suggestions about how the energy and power technology cluster might be taught as a course…

Portable Computer Technology (PCT) Research and Development Program Phase 2

NASA Technical Reports Server (NTRS)

Castillo, Michael; McGuire, Kenyon; Sorgi, Alan

1995-01-01

The subject of this project report, focused on: (1) Design and development of two Advanced Portable Workstation 2 (APW 2) units. These units incorporate advanced technology features such as a low power Pentium processor, a high resolution color display, National Television Standards Committee (NTSC) video handling capabilities, a Personal Computer Memory Card International Association (PCMCIA) interface, and Small Computer System Interface (SCSI) and ethernet interfaces. (2) Use these units to integrate and demonstrate advanced wireless network and portable video capabilities. (3) Qualification of the APW 2 systems for use in specific experiments aboard the Mir Space Station. A major objective of the PCT Phase 2 program was to help guide future choices in computing platforms and techniques for meeting National Aeronautics and Space Administration (NASA) mission objectives. The focus being on the development of optimal configurations of computing hardware, software applications, and network technologies for use on NASA missions.

Through the eyes of professional developers: Understanding the design of learning experiences for science teachers

NASA Astrophysics Data System (ADS)

Higgins, Tara Eileen

Professional development is important for improving teacher practice and student learning, particularly in inquiry-oriented and technology-enhanced science instruction. This study examines professional developers' practices and their impact on teachers' classroom instruction and student achievement. It analyzes professional developers designing and implementing a five-year professional development program designed to support middle school science teachers. The professional developers are four university-based researchers who worked with sixteen science teachers over three years, setting program goals, facilitating workshops, providing in-classroom support for teachers, and continually refining the program. The analysis is guided by the knowledge integration perspective, a sociocognitive framework for understanding how teachers and professional developers integrate their ideas about teaching and learning. The study investigates the professional developers' goals and teachers' interpretations of those goals. It documents how professional developers plan teacher learning experiences and explores the connection between professional development activities and teachers' classroom practice. Results are based on two rounds of interviews with professional developers, audio recordings of professional developers' planning meetings and videotaped professional development activities. Data include classroom observations, teacher interviews, teacher reflections during professional development activities, and results from student assessments. The study shows the benefit of a professional development approach that relies on an integrated cycle of setting goals, understanding teachers' interpretations, and refining implementation. The professional developers based their design on making inquiry and technology accessible, situating professional development in teachers' work, supporting collaboration, and sustaining learning. The findings reflect alignment of the design goals with the perspective guiding the curriculum design, and consider multiple goals for student and teacher learning. The study has implications for professional development design, particularly in supporting inquiry-oriented science and technology-enhanced instruction. Effective professional developers formulate coherent conceptions of program goals, use evidence of teacher outcomes to refine their goals and practices, and connect student and teacher learning. This study illustrates the value of research on the individuals who design and lead professional development programs.

Multi-criteria development and incorporation into decision tools for health technology adoption.

PubMed

Poulin, Paule; Austen, Lea; Scott, Catherine M; Waddell, Cameron D; Dixon, Elijah; Poulin, Michelle; Lafrenière, René

2013-01-01

When introducing new health technologies, decision makers must integrate research evidence with local operational management information to guide decisions about whether and under what conditions the technology will be used. Multi-criteria decision analysis can support the adoption or prioritization of health interventions by using criteria to explicitly articulate the health organization's needs, limitations, and values in addition to evaluating evidence for safety and effectiveness. This paper seeks to describe the development of a framework to create agreed-upon criteria and decision tools to enhance a pre-existing local health technology assessment (HTA) decision support program. The authors compiled a list of published criteria from the literature, consulted with experts to refine the criteria list, and used a modified Delphi process with a group of key stakeholders to review, modify, and validate each criterion. In a workshop setting, the criteria were used to create decision tools. A set of user-validated criteria for new health technology evaluation and adoption was developed and integrated into the local HTA decision support program. Technology evaluation and decision guideline tools were created using these criteria to ensure that the decision process is systematic, consistent, and transparent. This framework can be used by others to develop decision-making criteria and tools to enhance similar technology adoption programs. The development of clear, user-validated criteria for evaluating new technologies adds a critical element to improve decision-making on technology adoption, and the decision tools ensure consistency, transparency, and real-world relevance.

Overview of NASA's Space Solar Power Technology Advanced Research and Development Program

NASA Technical Reports Server (NTRS)

Howell, Joe; Mankins, John C.; Davis, N. Jan (Technical Monitor)

2001-01-01

Large solar power satellite (SPS) systems that might provide base load power into terrestrial markets were examined extensively in the 1970s by the US Department of Energy (DOE) and the National Aeronautics and Space Administration (NASA). Following a hiatus of about 15 years, the subject of space solar power (SSP) was reexamined by NASA from 1995-1997 in the 'fresh look' study, and during 1998 in an SSP 'concept definition study', and during 1999-2000 in the SSP Exploratory Research and Technology (SERT) program. As a result of these efforts, during 2001, NASA has initiated the SSP Technology Advanced Research and Development (STAR-Dev) program based on informed decisions. The goal of the STAR-Dev program is to conduct preliminary strategic technology research and development to enable large, multi-megawatt to gigawatt-class space solar power (SSP) systems and wireless power transmission (WPT) for government missions and commercial markets (in-space and terrestrial). Specific objectives include: (1) Release a NASA Research Announcement (NRA) for SSP Projects; (2) Conduct systems studies; (3) Develop Component Technologies; (4) Develop Ground and Flight demonstration systems; and (5) Assess and/or Initiate Partnerships. Accomplishing these objectives will allow informed future decisions regarding further SSP and related research and development investments by both NASA management and prospective external partners. In particular, accomplishing these objectives will also guide further definition of SSP and related technology roadmaps including performance objectives, resources and schedules; including 'multi-purpose' applications (commercial, science, and other government).

Meet-Up for Success: The Story of a Peer Led Program's Journey

ERIC Educational Resources Information Center

Kimmins, Lindy R.

2013-01-01

Technological advancements have forced space and time to evolve to present a virtual university that allows increasing numbers of students to study from a university rather than at university. The best people to guide and advise students through their university journey are experienced students. As Longfellow, May, Burke, and Marks-Maran (2008, p.…

Marine Fisheries Case Studies. Appropriate Technologies for Development. Case Study No. 1.

ERIC Educational Resources Information Center

Chakroff, Marilyn; DuBois, Random

This guide was developed to aid Peace Corps volunteers interested in programming marine fisheries projects. Although these projects are not new to the Peace Corps, new staff members may not be aware of the history of marine fisheries efforts in their country. Chapter 1 discusses all past marine fisheries projects initiated by the Peace Corps in…

A Fan Concept to Meet the 2017 Noise Goals

NASA Technical Reports Server (NTRS)

Dittmar, James H.

1998-01-01

The National Aeronautics and Space Administration has established a goal of a 20 EPNdB reduction of aircraft noise by the year 2017. This paper proposes a fan concept for an engine that may meet this noise goal. The concept builds upon technology established during the Advanced Subsonic Technology Program which should show a 10 dB reduction potential. The new concept uses a two stage fan which allows low tip speed while still maintaining a reasonable total pressure rise across the two stages. The concept also incorporates many other noise reduction techniques in addition to low tip speed including a low number of exit guide vanes, swept and leaned guide vanes, a high subsonic Mach number inlet and syncrophased rotors to obtain active noise cancellation. The fan proposed in this paper is calculated to be able to achieve the 2017 noise goal.

Using the Intervention Mapping and Behavioral Intervention Technology Frameworks: Development of an mHealth Intervention for Physical Activity and Sedentary Behavior Change.

PubMed

Direito, Artur; Walsh, Deirdre; Hinbarji, Moohamad; Albatal, Rami; Tooley, Mark; Whittaker, Robyn; Maddison, Ralph

2018-06-01

Few interventions to promote physical activity (PA) adapt dynamically to changes in individuals' behavior. Interventions targeting determinants of behavior are linked with increased effectiveness and should reflect changes in behavior over time. This article describes the application of two frameworks to assist the development of an adaptive evidence-based smartphone-delivered intervention aimed at influencing PA and sedentary behaviors (SB). Intervention mapping was used to identify the determinants influencing uptake of PA and optimal behavior change techniques (BCTs). Behavioral intervention technology was used to translate and operationalize the BCTs and its modes of delivery. The intervention was based on the integrated behavior change model, focused on nine determinants, consisted of 33 BCTs, and included three main components: (1) automated capture of daily PA and SB via an existing smartphone application, (2) classification of the individual into an activity profile according to their PA and SB, and (3) behavior change content delivery in a dynamic fashion via a proof-of-concept application. This article illustrates how two complementary frameworks can be used to guide the development of a mobile health behavior change program. This approach can guide the development of future mHealth programs.

NASA Space Technology Roadmaps and Priorities: Restoring NASA's Technological Edge and Paving the Way for a New Era in Space

NASA Technical Reports Server (NTRS)

2012-01-01

Success in executing future NASA space missions will depend on advanced technology developments that should already be underway. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development, and NASA's technology base is largely depleted. As noted in a recent National Research Council report on the U.S. civil space program: Future U.S. leadership in space requires a foundation of sustained technology advances that can enable the development of more capable, reliable, and lower-cost spacecraft and launch vehicles to achieve space program goals. A strong advanced technology development foundation is needed also to enhance technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management. Yet financial support for this technology base has eroded over the years. The United States is now living on the innovation funded in the past and has an obligation to replenish this foundational element. NASA has developed a draft set of technology roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist. The NRC appointed the Steering Committee for NASA Technology Roadmaps and six panels to evaluate the draft roadmaps, recommend improvements, and prioritize the technologies within each and among all of the technology areas as NASA finalizes the roadmaps. The steering committee is encouraged by the initiative NASA has taken through the Office of the Chief Technologist (OCT) to develop technology roadmaps and to seek input from the aerospace technical community with this study.

Science and Technology in Africa: The African Union New Initiative and Financial Support Perspectives

NASA Astrophysics Data System (ADS)

Ezin, Jean-Pierre

2010-02-01

Physics, which is widely touted as the most fundamental of the sciences, underpins the progress in all other branches of science and has a wide range of applications in economic development, including in health, energy research, food security, communication technology and climate change. The African Union (AU) Commission articulates the continental vision of its Member States and its programs are designed to directly contribute to its social and economic development and integration efforts. In the area of science and technology the Department has developed Africa's Science and Technology Consolidated Plan of Action as a strategic policy document through the AU system of conference of ministers responsible for science to guide the continent on common priority programs. The programs in this plan of action that have been transformed into bankable projects under the Book of ``lighthouse projects Phase 1'', adequately respond to Africa's challenges and development needs using science. They can be summarized into three main themes: a pan-African university (PAU) initiative (to combine higher education and scientific research as a network of differentiated PAU in each of the five African regions), African research grants (to strengthen the research capacity of the African institutions and upgrading infrastructures, consolidating their accumulated asset of scientific knowledge), popularization of science and technology and promotion of public participation (to build public understanding and raising awareness on science and technology as a driving agent for social and economic progress for Africa and its integration process) and a science and technology institutional capacity building program). This talk will review these programs as well as the vision of the African Development Bank role in it. )

Aerospace Structures Technology Damping Design Guide. Volume 1. Technology Review

DTIC Science & Technology

1985-12-01

AFWAL-TR-84-3089 Volume I AEROSPACE STRUCTURES TECHNOLOGY I DAMPING DESIGN GUIDE VOLUME I - TECHNOLOGY REVIEW J. SOOVERE LOCKHEED CALIFORNIA COMPANY...3089 Volume I AEROSPACE STRUCTURES TECHNOLOGY DAMPING DESIGN GUIDE VOLUME I - TECHNOLOGY REVIEW J. SOOVERE LOCKMD CALIFORNIA COMPANY P.O. BOX 551 BURBANK...PATTERSON AIR FORCE BASE, OHIO 454t33I I ft NOTICE When Government drawings, specifications, or other data are used for any purpose other than in

The Peroxide Pathway

NASA Technical Reports Server (NTRS)

McNeal, Curtis I., Jr.; Anderson, William

1999-01-01

NASA's current focus on technology roadmaps as a tool for guiding investment decisions leads naturally to a discussion of NASA's roadmap for peroxide propulsion system development. NASA's new Second Generation Space Transportation System roadmap calls for an integrated Reusable Upper-Stage (RUS) engine technology demonstration in the FY03/FY04 time period. Preceding this integrated demonstration are several years of component developments and subsystem technology demonstrations. NASA and the Air Force took the first steps at developing focused upper stage technologies with the initiation of the Upper Stage Flight Experiment with Orbital Sciences in December 1997. A review of this program's peroxide propulsion development is a useful first step in establishing the peroxide propulsion pathway that could lead to a RUS demonstration in 2004.

Electronic Learning-Spaced Education to Facilitate Resident Knowledge and Guide Program Didactics.

PubMed

Gandhi, Manisha; Beasley, Anitra; Vinas, Emily; Sangi-Haghpeykar, Haleh; Ramin, Susan M; Kilpatrick, Charlie C

2016-10-01

To evaluate the use of mobile technology to facilitate resident learning, assess clinical knowledge, and guide curricular development in a busy clinical environment. This was a cross-sectional study conducted in a large (N=48) urban obstetrics and gynecology residency program. Question sets were created in the following areas: office gynecology, general obstetrics, gynecologic surgery and urogynecology, maternal-fetal medicine and ultrasonography, reproductive endocrinology and pediatric gynecology, and gynecologic oncology. Using an educational mobile application (app), questions were sent monthly to resident smartphones with immediate feedback on answer accuracy along with answer explanation and references. Outcomes included app use, which was determined by how quickly participants answered questions (very active-active indicates questions answered within 7 days) and proficiency (mean percentage correct) calculated for individuals, resident class level, and by content area. All 48 residents participated and 77.4% were very active or active app users. On average, participants answered correctly 61.0% on the first attempt and improved to 78.3% on repeat attempt (P<.001). Proficiency was lowest for gynecologic surgery and highest for general obstetrics. A mobile app to support e-learning was successfully implemented in our program; its use was associated with knowledge retention and identification of low-proficiency topics to guide curriculum development.

Reviewing a Reading Program: Professional Development Module. Facilitator's Guide

ERIC Educational Resources Information Center

Kosanovich, Marcia; Jordan, Georgia; Arndt, Elissa; VanSciver, Mary; Wahl, Michelle; Rissman, Lila

2008-01-01

This "Facilitator's Guide" has been prepared for presenters of the Reviewing a Reading Program professional development training. It is one of three pieces comprising a suite of materials on reviewing reading programs: this "Guide", the "Reviewing a Reading Program Participant's Guide" and the "Reviewing a Reading Program" Professional Development…

A Lunar Surface System Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Taleghani, Barmac K.

2009-01-01

This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA's Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of "supportability", in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in a environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test & Verification, Maintenance & Repair, and Scavenging & Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set of technologies with widest possible capability and utility with a minimum impact on crew time and training and remain within the time and cost constraints of the Constellation program

A Lunar Surface System Supportability Technology Development Roadmap

NASA Technical Reports Server (NTRS)

Oeftering, Richard C.; Struk, Peter M.; Taleghani, barmac K.

2011-01-01

This paper discusses the establishment of a Supportability Technology Development Roadmap as a guide for developing capabilities intended to allow NASA s Constellation program to enable a supportable, sustainable and affordable exploration of the Moon and Mars. Presented is a discussion of supportability, in terms of space facility maintenance, repair and related logistics and a comparison of how lunar outpost supportability differs from the International Space Station. Supportability lessons learned from NASA and Department of Defense experience and their impact on a future lunar outpost is discussed. A supportability concept for future missions to the Moon and Mars that involves a transition from a highly logistics dependent to a logistically independent operation is discussed. Lunar outpost supportability capability needs are summarized and a supportability technology development strategy is established. The resulting Lunar Surface Systems Supportability Strategy defines general criteria that will be used to select technologies that will enable future flight crews to act effectively to respond to problems and exploit opportunities in an environment of extreme resource scarcity and isolation. This strategy also introduces the concept of exploiting flight hardware as a supportability resource. The technology roadmap involves development of three mutually supporting technology categories, Diagnostics Test and Verification, Maintenance and Repair, and Scavenging and Recycling. The technology roadmap establishes two distinct technology types, "Embedded" and "Process" technologies, with different implementation and thus different criteria and development approaches. The supportability technology roadmap addresses the technology readiness level, and estimated development schedule for technology groups that includes down-selection decision gates that correlate with the lunar program milestones. The resulting supportability technology roadmap is intended to develop a set of technologies with widest possible capability and utility with a minimum impact on crew time and training and remain within the time and cost constraints of the Constellation program.

Applying Technology Ranking and Systems Engineering in Advanced Life Support

NASA Technical Reports Server (NTRS)

Jones, Harry; Luna, Bernadette (Technical Monitor)

2000-01-01

According to the Advanced Life Support (ALS) Program Plan, the Systems Modeling and Analysis Project (SMAP) has two important tasks: 1) prioritizing investments in ALS Research and Technology Development (R&TD), and 2) guiding the evolution of ALS systems. Investments could be prioritized simply by independently ranking different technologies, but we should also consider a technology's impact on system design. Guiding future ALS systems will require SMAP to consider many aspects of systems engineering. R&TD investments can be prioritized using familiar methods for ranking technology. The first step is gathering data on technology performance, safety, readiness level, and cost. Then the technologies are ranked using metrics or by decision analysis using net present economic value. The R&TD portfolio can be optimized to provide the maximum expected payoff in the face of uncertain future events. But more is needed. The optimum ALS system can not be designed simply by selecting the best technology for each predefined subsystem. Incorporating a new technology, such as food plants, can change the specifications of other subsystems, such as air regeneration. Systems must be designed top-down starting from system objectives, not bottom-up from selected technologies. The familiar top-down systems engineering process includes defining mission objectives, mission design, system specification, technology analysis, preliminary design, and detail design. Technology selection is only one part of systems analysis and engineering, and it is strongly related to the subsystem definitions. ALS systems should be designed using top-down systems engineering. R&TD technology selection should consider how the technology affects ALS system design. Technology ranking is useful but it is only a small part of systems engineering.

TECHNOLOGY TRANSFER TO U.S. INDEPENDENT OIL AND NATURAL GAS PRODUCERS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donald Duttlinger

2001-11-01

The Petroleum Technology Transfer Council (PTTC) continued pursuing its mission of helping U.S. independent oil and gas producers make timely, informed technology decisions during Fiscal Year 2001 (FY01). Functioning as a cohesive national organization, PTTC has active grassroots programs through its ten Regional Lead Organizations (RLOs). They bring research and academia to the table via their association with geological surveys and engineering departments. The regional directors interact with independent oil and gas producers through technology workshops, resource centers, websites, newsletters, various technical publications and other outreach efforts. These are guided by regional Producer Advisory Groups (PAGs), who are area operatorsmore » and service companies working with the regional networks. The role of the national Headquarters (HQ) staff includes planning and managing the PTTC program, conducting nation wide technology transfer activities, and implementing a comprehensive communications effort. The organization effectively combines federal funding through the Department of Energy's (DOE) Office of Fossil Energy, state, and industry funding to achieve important goals for all of these sectors. This integrated funding base, combined with industry volunteers guiding PTTC's activities and the dedication of national and regional staff, are achieving notable results. PTTC is increasingly recognized as a critical resource for information and access to technologies, especially for smaller companies without direct contact to R&D efforts. This technical progress report summarizes PTTC's accomplishments during FY01, which lays the groundwork for further growth in the future. At a time of many industry changes and wide market movements, the organization itself is adapting to change. PTTC has built a reputation and expectation among producers and other industry participants to quickly distribute information addressing technical needs. The organization efficiently has an impact on business economics as the focus remains on proven applicable technologies, which target cost reduction and efficiency gains.« less

Software Model Checking Without Source Code

NASA Technical Reports Server (NTRS)

Chaki, Sagar; Ivers, James

2009-01-01

We present a framework, called AIR, for verifying safety properties of assembly language programs via software model checking. AIR extends the applicability of predicate abstraction and counterexample guided abstraction refinement to the automated verification of low-level software. By working at the assembly level, AIR allows verification of programs for which source code is unavailable-such as legacy and COTS software-and programs that use features-such as pointers, structures, and object-orientation-that are problematic for source-level software verification tools. In addition, AIR makes no assumptions about the underlying compiler technology. We have implemented a prototype of AIR and present encouraging results on several non-trivial examples.

Developing a new hybrid revascularization program: a road map for hospital managers and physician leaders.

PubMed

Harjai, Kishore J; Samy, Sanjay; Pennypacker, Barbara; Onofre, Bonnie; Stanfield, Pamela; Yaeger, Lynne; Stapleton, Dwight; Esrig, Barry C

2012-12-01

Hybrid coronary revascularization, which involves minimally invasive direct coronary artery bypass surgery using the left internal mammary artery to left anterior descending and percutaneous coronary intervention using drug-eluting stents for the remaining diseased coronary vessels, is an innovative approach to decrease the morbidity of conventional surgery. Little information is available to guide hospital managers and physician leaders in implementing a hybrid revascularization program. In this article, we describe the people-process-technology issues that managers and leaders are likely to encounter as they develop a hybrid revascularization program in their practice. ©2012, Wiley Periodicals, Inc.

User preferences for a text message-based smoking cessation intervention.

PubMed

Bock, Beth C; Heron, Kristin E; Jennings, Ernestine G; Magee, Joshua C; Morrow, Kathleen M

2013-04-01

Younger adults are more likely to smoke and less likely to seek treatment than older smokers. They are also frequent users of communication technology. In the current study, we conducted focus groups to obtain feedback about preferences for a text message-based smoking cessation program from potential users. Participants (N = 21, M age = 25.6 years, age range = 20-33 years) were current or recently quit smokers (M cigarettes/day = 12.8) who used text messaging. Participants completed questionnaires and participated in a 2-hour focus group. Focus groups were conducted using an a priori semistructured interview guide to promote discussion of the content and functionality of the intervention. Major themes from analysis of the focus groups included support for the acceptability of a text-based cessation program, suggestions for a more technologically broad-based program, and adjustments to the program structure. Participants recommended including social networking functions, user control of program output through an online profile, and text message features to promote interaction with the system. Interestingly, many participants suggested the program should begin on individuals' identified quit day, challenging the procedures used in most cessation programs, which begin by preparing participants for a future quit date. Overall, younger adult smokers appear to be interested in participating in a smoking cessation program that uses text messages and web-based elements. Qualitative feedback regarding the perceived optimal features and structure of a technology-based intervention challenged traditional methods of implementing smoking cessation interventions and will inform the development of future programs.

Operator Performance Support System (OPSS)

NASA Technical Reports Server (NTRS)

Conklin, Marlen Z.

1993-01-01

In the complex and fast reaction world of military operations, present technologies, combined with tactical situations, have flooded the operator with assorted information that he is expected to process instantly. As technologies progress, this flow of data and information have both guided and overwhelmed the operator. However, the technologies that have confounded many operators today can be used to assist him -- thus the Operator Performance Support Team. In this paper we propose an operator support station that incorporates the elements of Video and Image Databases, productivity Software, Interactive Computer Based Training, Hypertext/Hypermedia Databases, Expert Programs, and Human Factors Engineering. The Operator Performance Support System will provide the operator with an integrating on-line information/knowledge system that will guide expert or novice to correct systems operations. Although the OPSS is being developed for the Navy, the performance of the workforce in today's competitive industry is of major concern. The concepts presented in this paper which address ASW systems software design issues are also directly applicable to industry. the OPSS will propose practical applications in how to more closely align the relationships between technical knowledge and equipment operator performance.

Assistive technology for ultrasound-guided central venous catheter placement.

PubMed

Ikhsan, Mohammad; Tan, Kok Kiong; Putra, Andi Sudjana

2018-01-01

This study evaluated the existing technology used to improve the safety and ease of ultrasound-guided central venous catheterization. Electronic database searches were conducted in Scopus, IEEE, Google Patents, and relevant conference databases (SPIE, MICCAI, and IEEE conferences) for related articles on assistive technology for ultrasound-guided central venous catheterization. A total of 89 articles were examined and pointed to several fields that are currently the focus of improvements to ultrasound-guided procedures. These include improving needle visualization, needle guides and localization technology, image processing algorithms to enhance and segment important features within the ultrasound image, robotic assistance using probe-mounted manipulators, and improving procedure ergonomics through in situ projections of important information. Probe-mounted robotic manipulators provide a promising avenue for assistive technology developed for freehand ultrasound-guided percutaneous procedures. However, there is currently a lack of clinical trials to validate the effectiveness of these devices.

Metal Fabrication. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for metal fabrication. The guide contains the following sections: occupational description; program content…

Mobile technologies in medical education: AMEE Guide No. 105.

PubMed

Masters, Ken; Ellaway, Rachel H; Topps, David; Archibald, Douglas; Hogue, Rebecca J

2016-06-01

Mobile technologies (including handheld and wearable devices) have the potential to enhance learning activities from basic medical undergraduate education through residency and beyond. In order to use these technologies successfully, medical educators need to be aware of the underpinning socio-theoretical concepts that influence their usage, the pre-clinical and clinical educational environment in which the educational activities occur, and the practical possibilities and limitations of their usage. This Guide builds upon the previous AMEE Guide to e-Learning in medical education by providing medical teachers with conceptual frameworks and practical examples of using mobile technologies in medical education. The goal is to help medical teachers to use these concepts and technologies at all levels of medical education to improve the education of medical and healthcare personnel, and ultimately contribute to improved patient healthcare. This Guide begins by reviewing some of the technological changes that have occurred in recent years, and then examines the theoretical basis (both social and educational) for understanding mobile technology usage. From there, the Guide progresses through a hierarchy of institutional, teacher and learner needs, identifying issues, problems and solutions for the effective use of mobile technology in medical education. This Guide ends with a brief look to the future.

Program Resource Guide.

ERIC Educational Resources Information Center

National School Resource Network, Washington, DC.

This program resource guide is a compilation of all programs and projects on preventing school violence and vandalism referenced in National School Resource Network (NSRN) materials. The programs cited are described in NSRN trainers' guides, participant guides, technical assistance bulletins, an "Aha" listing, and a compendium. The index is…

Understanding Country Planning: A Guide for Air Force Component Planners

DTIC Science & Technology

2012-01-01

TRANSPORTATION INTERNATIONAL AFFAIRS LAW AND BUSINESS NATIONAL SECURITY POPULATION AND AGING PUBLIC SAFETY SCIENCE AND TECHNOLOGY TERRORISM AND...example, Jefferson P. Marquis, Richard E. Darilek, Jasen J. Castillo, Cathryn Quantic Thurston, Anny Wong, Cynthia Huger, Andrea Mejia, Jennifer D. P...2006; Jennifer D. P. Moroney, Jefferson P. Marquis, Cathryn Quantic Thurston, and Gregory F. Treverton, A Framework to Assess Programs for Building

Homemaking Handbook for Village Workers in Many Countries. Appropriate Technologies for Development. Peace Corps Information Collection & Exchange Reprint No. R-39.

ERIC Educational Resources Information Center

Extension Service (USDA), Washington, DC.

This handbook, designed as a guide for the village level worker, can also serve as a teaching aid and text for teachers of village workers. It is intended for use by personnel in home economics extension, community development, home economics classroom teaching, health education, and other programs involving home and family life. Section I…

The Department of Defense’s Second Chasm in RFID-UID Technology Adoption

DTIC Science & Technology

2007-12-01

Lenders Program DFAR Defense Financial Accounting Regulation DoD Department of Defense DoDSIG Department of Defense Suppliers Information Guide EFT ...through electronic funds transfer ( EFT ). Additionally, CCR shares the data with federal government procurement and electronic business systems. (CCR...government contracting procedures. Additionally, the small business contractors can also tap into SBA resources to find out the latest news on

YouTube War: Fighting in a World of Cameras in Every Cell Phone and Photoshop on Every Computer

DTIC Science & Technology

2009-11-01

free MovieMaker 2 program that Microsoft includes with its Windows XP operating system. Mike Wendland, “From ENG to SNG : TV Technology for Covering the...the deployed soldier. 51. Wendland, “From ENG to SNG .” 52. This is based in part on the typology in Ben Venzke, “Jihadi Master Video Guide, JMVG

2.75-Inch Motor Manufacturing Waste Minimization Project

DTIC Science & Technology

2006-06-19

Certification Program FEM Finite element model HFMI Highly Filled Materials Institute HOE Heat of explosion ICT Institute of Chemical Technology IHDIV...Trinitrotoluene TOW Tube-launched, optically tracked, wire-guided missile TPE Thermoplastic elastomers TSE Twin screw mixer/extruder VPDES Virginia Pollution...extruded and test fired. 1996–1997 Inert TPE Processing: Thermoplastic elastomers (TPE) are ideal binders for “green energetics” because they do

Solar Terrestrial programs: A five year plan

NASA Technical Reports Server (NTRS)

Stern, D. P.

1978-01-01

Major projects to be initiated in the 1980-1985 period, designed to study the Sun, the heliosphere, Earth's magnetosphere, and the upper atmosphere involve the use of spacelab as well as free flying spacecraft. Current and recent investigations in these areas are reviewed and the guiding principles followed in planning future missions are examined. The implementation strategy, the planning process, and supporting research and technology are discussed.

Hospitality Management. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This program guide is intended for the implementation of a hospitality management program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, describes jobs under the program, and includes a curriculum framework and student performance standards for…

An Overview of Electric Propulsion Activities at NASA

NASA Technical Reports Server (NTRS)

Dunning, John W., Jr.; Hamley, John A.; Jankovsky, Robert S.; Oleson, Steven R.

2004-01-01

This paper provides an overview of NASA s activities in the area of electric propulsion with an emphasis on project directions, recent progress, and a view of future project directions. The goals of the electric propulsion programs are to develop key technologies to enable new and ambitious science missions and to transfer these technologies to industry. Activities include the development of gridded ion thruster technology, Hall thruster technology, pulsed plasma thruster technology, and very high power electric propulsion technology, as well as systems technology that supports practical implementation of these advanced concepts. The performance of clusters of ion and Hall thrusters is being revisited. Mission analyses, based on science requirements and preliminary mission specifications, guide the technology projects and introduce mission planners to new capabilities. Significant in-house activity, with strong industrial/academia participation via contracts and grants, is maintained to address these development efforts. NASA has initiated a program covering nuclear powered spacecraft that includes both reactor and radioisotope power sources. This has provided an impetus to investigate higher power and higher specific impulse thruster systems. NASA continues to work closely with both supplier and user communities to maximize the understanding and acceptance of new technology in a timely and cost-effective manner. NASA s electric propulsion efforts are closely coordinated with Department of Defense and other national programs to assure the most effective use of available resources. Several NASA Centers are actively involved in these electric propulsion activities, including, the Glenn Research Center, Jet Propulsion Laboratory, Johnson Space Center, and Marshall Space Flight Center.

A Guide Management System Based on RFID and Bluetooth Technology

NASA Astrophysics Data System (ADS)

Li, Han-Sheng; Wang, Jun-Jun

The most fundamental and important requirement of the tour guide in the tour process is to ensure the safety of tourists. In this paper, a portable guide management system is designed based on RFID technology, the Android software and blue-tooth communication technology. Through this system, the guide can get real-time information if some tourists are l behind, and send text message or dial to those tourists who are l behind immediately. The system reduces the roll-calling time on the tourists, improves the tour guide work efficiency and service quality.

Basic Gasoline Engine Mechanics. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a basic gasoline engine mechanics program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

Consumer Electronic Product Servicing. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a consumer electronic product servicing program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes…

Computer Integrated Manufacturing. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a computer-integrated manufacturing program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the program, and includes a…

Communication Electronics. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This packet contains a program guide and Career Merit Achievement Plan (Career MAP) for the implementation of a communication electronics (communications technician) program in Florida secondary and postsecondary schools. The program guide describes the program content and structure, provides a program description, lists job titles under the…

Where the Ocean Meets the Girl Guides, Exploring the Interface Between Teaching Science and Using Specialized Programs to Engage Girls in Ocean Literacy

NASA Astrophysics Data System (ADS)

Pelz, M. S.; Ewing, N.; Davidson, E.; Hoeberechts, M.

2016-02-01

This presentation focuses on Ocean Aware, a joint project between Ocean Networks Canada (ONC) and the British Columbia Girl Guides Canada (Girl Guides). On World Oceans Day 2014, Girl Guides launched a new challenge to its members: "Are you Ocean Aware?" To answer this question, girls of any age can now earn their Ocean Aware Challenge crest. Ocean Networks Canada (ONC), an initiative of the University of Victoria, operates cabled ocean observatories which supply continuous power and Internet connectivity to a broad suite of subsea instruments from the coast to the deep sea. This Internet connectivity permits researchers, students and members of the public to download freely available data on their computers anywhere around the globe, in near real-time. Girl Guides provides a safe, all-girl environment that invites girls to challenge themselves, to find their voice, meet new friends, have fun and make a difference in the world. Girl Guides strives to ensure that girls and women from all walks of life, identities and lived experiences feel a sense of belonging and can fully participate. Girl Guides of Canada is a member of the World Association of Girl Guides and Girl Scouts. Through a partnership between ONC and Girl Guides, Ocean Aware was created to promote ocean literacy and ocean technology to thousands of Guiders in British Columbia and beyond. One of the most interesting challenges was to present STEM learning outcomes in such a way that they are accessible to girls, facilitators, and communities that are both on the coast and inland. With a creative eye to the preforming arts, hands-on experiments, interactive experiences and games, this challenge successfully brings the 7 Principles of Ocean Literacy to any girl, in any community. In this presentation we will share some of the strategies, challenges and impacts of creating a successful program that engages a large audience in ocean science through a novel partnership.

Missouri Introduction to Materials and Processing Technology. Instructor Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This guide is intended to support a high school specialization course in materials and processing technology. The document contains three sections: (1) information on using the material; (2) a set of instructor guides for eight instructional units; (3) 15 technological activity modules and teacher and student instructions for their use; and (4)…

Integrating Technology into the K-12 Music Curriculum.

ERIC Educational Resources Information Center

Washington Office of the State Superintendent of Public Instruction, Olympia.

This guide is intended to provide resources for integrating technology into the K-12 music curriculum. The focus of the guide is on computer software and the use of MIDI (Musical Instrument Digital Interface) in the music classroom. The guide gives two examples of commercially available curricula that integrate technology as well as lesson plans…

Development of guided horizontal boring tools. Final report, June 1984-March 1991

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonald, W.J.; Herben, W.C.; Pittard, G.T.

Maurer Engineering Inc. (MEI), under a contract with the Gas Research Institute (GRI), has led a team of research and manufacturing companies with the goal of developing a guided boring tool for installing gas distribution piping. Studies indicated guided horizontal boring systems can provide gas utilities with a more effective and economical method for installing pipe than conventional techniques with a potential cost savings of at least 15% to 50%. A comprehensive state of technology review of horizontal boring tools identified concepts appropriate to being directionally controlled. Development of a universal system was found impractical because the requirements for shortmore » and extended range systems are significantly different. Concepts for steering and tracking were evaluated through lab and field experiments which progressed from proof of concept tests to cooperative field tests with gas utilities at the various stages of system development. The systems were brought to commercial status with needed modifications and the technology transferred to licensees who would market the systems. The program resulted in the development and commercialization of five distinct guided boring system. Pipe can now be installed more rapidly over longer distances with a minimal amount of excavation required for launching and retrieval. This means increased work crew productivity, reduced disturbance to landscaping and environmentally sensitive areas, and reduced traffic disruption and public inconvenience.« less

Electro-Technologies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technologies Studies (CTS) curriculum guide, secondary students in Alberta can do the following: develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in electro-technologies; enhance employability skills, especially in electro-technologies industries; and…

OPDOT: A computer program for the optimum preliminary design of a transport airplane

NASA Technical Reports Server (NTRS)

Sliwa, S. M.; Arbuckle, P. D.

1980-01-01

A description of a computer program, OPDOT, for the optimal preliminary design of transport aircraft is given. OPDOT utilizes constrained parameter optimization to minimize a performance index (e.g., direct operating cost per block hour) while satisfying operating constraints. The approach in OPDOT uses geometric descriptors as independent design variables. The independent design variables are systematically iterated to find the optimum design. The technical development of the program is provided and a program listing with sample input and output are utilized to illustrate its use in preliminary design. It is not meant to be a user's guide, but rather a description of a useful design tool developed for studying the application of new technologies to transport airplanes.

On The Export Control Of High Speed Imaging For Nuclear Weapons Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watson, Scott Avery; Altherr, Michael Robert

Since the Manhattan Project, the use of high-speed photography, and its cousins flash radiography1 and schieleren photography have been a technological proliferation concern. Indeed, like the supercomputer, the development of high-speed photography as we now know it essentially grew out of the nuclear weapons program at Los Alamos2,3,4. Naturally, during the course of the last 75 years the technology associated with computers and cameras has been export controlled by the United States and others to prevent both proliferation among non-P5-nations and technological parity among potential adversaries among P5 nations. Here we revisit these issues as they relate to high-speed photographicmore » technologies and make recommendations about how future restrictions, if any, should be guided.« less

NASA Environmental Control and Life Support Technology Development and Maturation for Exploration: 2015 to 2016 Overview

NASA Technical Reports Server (NTRS)

Schneider, Walter F.; Gatens, Robyn L.; Anderson, Molly S.; Broyan, James L.; MaCatangay, Ariel V.; Shull, Sarah A.; Perry, Jay L.; Toomarian, Nikzad

2016-01-01

Over the last year, the National Aeronautics and Space Administration (NASA) has continued to refine the understanding and prioritization of technology gaps that must be closed in order to achieve Evolvable Mars Campaign objectives and near term objectives in the cislunar proving ground. These efforts are reflected in updates to the technical area roadmaps released by NASA in 2015 and have guided technology development and maturation tasks that have been sponsored by various programs. This paper provides an overview of the refined Environmental Control and Life Support (ECLS) strategic planning, as well as a synopsis of key technology and maturation project tasks that occurred in 2014 and early 2015 to support the strategic needs. Plans for the remainder of 2015 and subsequent years are also described.

Program Model Checking: A Practitioner's Guide

NASA Technical Reports Server (NTRS)

Pressburger, Thomas T.; Mansouri-Samani, Masoud; Mehlitz, Peter C.; Pasareanu, Corina S.; Markosian, Lawrence Z.; Penix, John J.; Brat, Guillaume P.; Visser, Willem C.

2008-01-01

Program model checking is a verification technology that uses state-space exploration to evaluate large numbers of potential program executions. Program model checking provides improved coverage over testing by systematically evaluating all possible test inputs and all possible interleavings of threads in a multithreaded system. Model-checking algorithms use several classes of optimizations to reduce the time and memory requirements for analysis, as well as heuristics for meaningful analysis of partial areas of the state space Our goal in this guidebook is to assemble, distill, and demonstrate emerging best practices for applying program model checking. We offer it as a starting point and introduction for those who want to apply model checking to software verification and validation. The guidebook will not discuss any specific tool in great detail, but we provide references for specific tools.

Basic Commercial Art. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This document includes a vocational program guide and Career Merit Achievement Plan (Career MAP) for secondary and postsecondary basic commercial art programs. The guide contains the following sections: occupational description; program content (curriculum framework and student performance standards); program implementation (student admission…

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 2; BFaNS User's Manual and Developer's Guide

NASA Technical Reports Server (NTRS)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the second volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running BFaNS. It concludes with technical documentation of the BFaNS computer program.

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 1; Setup_BFaNS User's Manual and Developer's Guide

NASA Technical Reports Server (NTRS)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the first volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User's Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running Setup_BFaNS. It concludes with technical documentation of the Setup_BFaNS computer program.

Smart human serum albumin-indocyanine green nanoparticles generated by programmed assembly for dual-modal imaging-guided cancer synergistic phototherapy.

PubMed

Sheng, Zonghai; Hu, Dehong; Zheng, Mingbin; Zhao, Pengfei; Liu, Huilong; Gao, Duyang; Gong, Ping; Gao, Guanhui; Zhang, Pengfei; Ma, Yifan; Cai, Lintao

2014-12-23

Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), is a light-activated local treatment modality that is under intensive preclinical and clinical investigations for cancer. To enhance the treatment efficiency of phototherapy and reduce the light-associated side effects, it is highly desirable to improve drug accumulation and precision guided phototherapy for efficient conversion of the absorbed light energy to reactive oxygen species (ROS) and local hyperthermia. In the present study, a programmed assembly strategy was developed for the preparation of human serum albumin (HSA)-indocyanine green (ICG) nanoparticles (HSA-ICG NPs) by intermolecular disulfide conjugations. This study indicated that HSA-ICG NPs had a high accumulation with tumor-to-normal tissue ratio of 36.12±5.12 at 24 h and a long-term retention with more than 7 days in 4T1 tumor-bearing mice, where the tumor and its margin, normal tissue were clearly identified via ICG-based in vivo near-infrared (NIR) fluorescence and photoacoustic dual-modal imaging and spectrum-resolved technology. Meanwhile, HSA-ICG NPs efficiently induced ROS and local hyperthermia simultaneously for synergetic PDT/PTT treatments under a single NIR laser irradiation. After an intravenous injection of HSA-ICG NPs followed by imaging-guided precision phototherapy (808 nm, 0.8 W/cm2 for 5 min), the tumor was completely suppressed, no tumor recurrence and treatments-induced toxicity were observed. The results suggest that HSA-ICG NPs generated by programmed assembly as smart theranostic nanoplatforms are highly potential for imaging-guided cancer phototherapy with PDT/PTT synergistic effects.

Commercial Foods. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for commercial foods. The guide contains the following sections: occupational description; program…

TRIDENT II (D-5) Strategic Weapon System Guide for Potential Subcontractors.

DTIC Science & Technology

1982-01-01

pattern. Usually high technology item subcontracts are the first selected, This is followed by crit- ical, special long-lead time, common, and...performance. These disciplines provide the program with a definitive approach to maintaining high standards of reliability and readiness for weapon system...missile itself will be increased in length and diameter.. The range of the missile will be enhanced, and it will carry an increased payload. Energy

A Complete Handbook on Backyward and Commercial Rabbit Production = Sa Kalusugan ng Bayan Rabbit Ang Alagaan. Appropriate Technologies for Development. Reprint R-41.

ERIC Educational Resources Information Center

Sicwaten, Juan B.; Stahl, Diane

This handbook on rabbit raising, prepared for use by Peace Corps volunteers, attempts to share information gained by rabbit raisers in the Philippines along with information gathered from academic sources. The manual provides step-by-step information on how to begin and carry out a program of rabbit production. The 15 sections of the guide cover…

Resource Analysis of Cognitive Process Flow Used to Achieve Autonomy

DTIC Science & Technology

2016-03-01

to be used as a decision - making aid to guide system designers and program managers not necessarily familiar with cognitive pro- cessing, or resource...implementing end-to-end cognitive processing flows multiplies and the impact of these design decisions on efficiency and effectiveness increases [1]. The...end-to-end cognitive systems and alternative computing technologies, then system design and acquisition personnel could make systematic analyses and

Applied analytical combustion/emissions research at the NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Deur, J. M.; Kundu, K. P.; Nguyen, H. L.

1992-01-01

Emissions of pollutants from future commercial transports are a significant concern. As a result, the Lewis Research Center (LeRC) is investigating various low emission combustor technologies. As part of this effort, a combustor analysis code development program was pursued to guide the combustor design process, to identify concepts having the greatest promise, and to optimize them at the lowest cost in the minimum time.

Applied Analytical Combustion/emissions Research at the NASA Lewis Research Center - a Progress Report

NASA Technical Reports Server (NTRS)

Deur, J. M.; Kundu, K. P.; Nguyen, H. L.

1992-01-01

Emissions of pollutants from future commercial transports are a significant concern. As a result, the Lewis Research Center (LeRC) is investigating various low emission combustor technologies. As part of this effort, a combustor analysis code development program was pursued to guide the combustor design process, to identify concepts having the greatest promise, and to optimize them at the lowest cost in the minimum time.

Family and Consumer Sciences Technology-Life-Careers Core Curriculum. A Curriculum Guide. A Family and Consumer Sciences Education Course of Study for Grades 6-7.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

This curriculum, part of a coordinated exploratory vocational core program, is an activity-oriented instructional course that enables students in grades 6-7 to explore careers and skills related to consumer and occupational roles. The curriculum consists of five units: (1) independent living skills; (2) families; (3) child care; (4) textiles…

WE-H-209-00: Carson/Zagzebski Distinguished Lectureship: Image Guided Ultrasound Therapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Focused ultrasound has been shown to be the only method that allows noninvasive thermal coagulation of tissues and recently this potential has been explored for image-guided drug delivery. In this presentation, the advances in ultrasound phased array technology for energy delivery, exposure monitoring and control will be discussed. Experimental results from novel multi-frequency transmit/receive arrays will be presented. In addition, the feasibility of fully electronically focused and steered high power arrays with many thousands of transducer elements will be discussed. Finally, some of the recent clinical and preclinical results for the treatment of brain disease will be reviewed. Learning Objectives:more » Introduce FUS therapy principles and modern techniques Discuss use of FUS for drug delivery Cover the technology required to deliver FUS and monitor therapy Present clinical examples of the uses of these techniques This research was supported by funding from The Canada Research Chair Program, Grants from CIHR and NIH (no. EB003268).; K. Hynynen, Canada Foundation for Innovation; Canadian Institutes of Health Research; Focused Ultrasound Surgery Foundation; Canada Research Chair Program; Natural Sciences and Engineering Research Council of Canada; Ontario Research Fund; National Institutes of Health; Canadian Cancer Society Research Institute; The Weston Brain Institute; Harmonic Medical; Focused Ultrasound Instruments.« less

Insights into Industry and Technology. Curriculum Guide.

ERIC Educational Resources Information Center

North Dakota State Board for Vocational Education, Bismarck.

One of a set of six guides for an industrial arts curriculum at the junior high school level, this guide provides the basic foundation to develop a one-semester course based on the following cluster concept: insights into industry and technology. An overview of industry and technology is provided to serve as an integrator or unifier of industry…

Commercial Vehicle Driving. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for commercial vehicle driving. The guide contains the following sections: occupational description; program…

Precision Metal Fabrication. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for precision metal fabrication. The guide contains the following sections: occupational description; program…

Deployable reflector design for Ku-band operation

NASA Technical Reports Server (NTRS)

Tankersley, B. C.

1974-01-01

A project was conducted to extend the deployable antenna technology state-of-the art through the design, analysis, construction, and testing of a lightweight, high surface tolerance, 12.5 foot diameter reflector for Ku-band operation. The applicability of the reflector design to the Tracking and Data Relay Satellite (TDRS) program was one requirement to be met. A documentary of the total program is presented. The performance requirements used to guide and constrain the design are discussed. The radio frequency, structural/dynamic, and thermal performance results are reported. Appendices are used to provide test data and detailed fabrication drawings of the reflector.

EngineSim: Turbojet Engine Simulator Adapted for High School Classroom Use

NASA Technical Reports Server (NTRS)

Petersen, Ruth A.

2001-01-01

EngineSim is an interactive educational computer program that allows users to explore the effect of engine operation on total aircraft performance. The software is supported by a basic propulsion web site called the Beginner's Guide to Propulsion, which includes educator-created, web-based activities for the classroom use of EngineSim. In addition, educators can schedule videoconferencing workshops in which EngineSim's creator demonstrates the software and discusses its use in the educational setting. This software is a product of NASA Glenn Research Center's Learning Technologies Project, an educational outreach initiative within the High Performance Computing and Communications Program.

2016 Science Mission Directorate Technology Highlights

NASA Technical Reports Server (NTRS)

Seablom, Michael S.

2017-01-01

The role of the Science Mission Directorate (SMD) is to enable NASA to achieve its science goals in the context of the nation's science agenda. SMD's strategic decisions regarding future missions and scientific pursuits are guided by agency goals, input from the science community including the recommendations set forth in the National Research Council (NRC) decadal surveys and a commitment to preserve a balanced program across the major science disciplines. Toward this end, each of the four SMD science divisions -- Heliophysics, Earth Science, Planetary Science, and Astrophysics -- develops fundamental science questions upon which to base future research and mission programs.

Aligning physical learning spaces with the curriculum: AMEE Guide No. 107.

PubMed

Nordquist, Jonas; Sundberg, Kristina; Laing, Andrew

2016-08-01

This Guide explores emerging issues on the alignment of learning spaces with the changing curriculum in medical education. As technology and new teaching methods have altered the nature of learning in medical education, it is necessary to re-think how physical learning spaces are aligned with the curriculum. The better alignment of learning spaces with the curriculum depends on more directly engaged leadership from faculty and the community of medical education for briefing the requirements for the design of all kinds of learning spaces. However, there is a lack of precedent and well-established processes as to how new kinds of learning spaces should be programmed. Such programmes are essential aspects of optimizing the intended experience of the curriculum. Faculty and the learning community need better tools and instruments to support their leadership role in briefing and programming. A Guide to critical concepts for exploring the alignment of curriculum and learning spaces is provided. The idea of a networked learning landscape is introduced as a way of assessing and evaluating the alignment of physical spaces to the emerging curriculum. The concept is used to explore how technology has widened the range of spaces and places in which learning happens as well as enabling new styles of learning. The networked learning landscaped is explored through four different scales within which learning is accommodated: the classroom, the building, the campus, and the city. High-level guidance on the process of briefing for the networked learning landscape is provided, to take into account the wider scale of learning spaces and the impact of technology. Key to a successful measurement process is argued to be the involvement of relevant academic stakeholders who can identify the strategic direction and purpose for the design of the learning environments in relation to the emerging demands of the curriculum.

Research on the laser angle deception jamming technology of laser countermeasure

NASA Astrophysics Data System (ADS)

Ma, Shi-wei; Chen, Wen-jian; Gao, Wei; Duan, Yuan-yuan

2015-10-01

In recent years , laser guided weapons behave very well at destroying the military goals in the local wars, the single-shot probability, effective range and hitting precision getting better. And the semi-active laser guided weapons are the most widely used laser guided weapons. In order to improve the viability and protect important military goals, it's necessary to study the technology to against the semi-active guided weapons. This paper studies the working principle, the advantages and disadvantages of the semi-active guided weapons at first, and analyze the possibility of laser angle deception jamming system working. Then it analyzes the working principle and process of laser angle deception jamming technology. Finally it designs a half-real simulation system of laser angle deception jamming, which consists of semi-active laser guided weapons simulation system and laser angle deception jamming system. The simulation system demonstrates the working process of the laser angle deception jamming system. This paper provides fundamental base for the research on the countermeasure technology of semi-active laser guided weapons.

Systematic review of the information and communication technology features of web- and mobile-based psychoeducational interventions for depression.

PubMed

Zhao, Danyang; Lustria, Mia Liza A; Hendrickse, Joshua

2017-06-01

To examine the information and communication technology (ICT) features of psychoeducational interventions for depression delivered via the Internet or via mobile technology. Web- and mobile-based psychoeducational intervention studies published from 2004 to 2014 were selected and reviewed by two independent coders. A total of 55 unique studies satisfied the selection criteria. The review revealed a diverse range of ICTs used to support the psychoeducational programs. Most interventions used websites as their main mode of delivery and reported greater use of communication tools compared to effective approaches like tailoring or interactive technologies games, videos, and self-monitoring tools. Many of the studies relied on medium levels of clinician involvement and only a few were entirely self-guided. Programs that reported higher levels of clinician involvement also reported using more communication tools, and reported greater compliance to treatment. Future experimental studies may help unpack the effects of technology features and reveal new ways to automate aspects of clinician input. There is a need to further examine ways ICTs can be optimized to reduce the burden on clinicians whilst enhancing the delivery of proven effective therapeutic approaches. Copyright © 2017 Elsevier B.V. All rights reserved.

Space-Based Astronomy: An Educator Guide with Activities for Science, Mathematics, and Technology Education.

ERIC Educational Resources Information Center

Vogt, Gregory L.

This educator's guide features activities for science, mathematics, and technology education. The activities in this curriculum guide were developed based on the hands-on approach. The guide starts with introductory information and is followed by five units: (1) "The Atmospheric Filter"; (2) "The Electromagnetic Spectrum"; (3)…

Evaluation Criteria for Solid Waste Processing Research and Technology Development

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, J. A.; Alazraki, M. P.

2001-01-01

A preliminary list of criteria is proposed for evaluation of solid waste processing technologies for research and technology development (R&TD) in the Advanced Life Support (ALS) Program. Completion of the proposed list by current and prospective ALS technology developers, with regard to specific missions of interest, may enable identification of appropriate technologies (or lack thereof) and guide future development efforts for the ALS Program solid waste processing area. An attempt is made to include criteria that capture information about the technology of interest as well as its system-wide impacts. Some of the criteria in the list are mission-independent, while the majority are mission-specific. In order for technology developers to respond to mission-specific criteria, critical information must be available on the quantity, composition and state of the waste stream, the wast processing requirements, as well as top-level mission scenario information (e.g. safety, resource recovery, planetary protection issues, and ESM equivalencies). The technology readiness level (TRL) determines the degree to which a technology developer is able to accurately report on the list of criteria. Thus, a criteria-specific minimum TRL for mandatory reporting has been identified for each criterion in the list. Although this list has been developed to define criteria that are needed to direct funding of solid waste processing technologies, this list processes significant overlap in criteria required for technology selection for inclusion in specific tests or missions. Additionally, this approach to technology evaluation may be adapted to other ALS subsystems.

Physician Attitudes toward Adopting Genome-Guided Prescribing through Clinical Decision Support

PubMed Central

Overby, Casey Lynnette; Erwin, Angelika Ludtke; Abul-Husn, Noura S.; Ellis, Stephen B.; Scott, Stuart A.; Obeng, Aniwaa Owusu; Kannry, Joseph L.; Hripcsak, George; Bottinger, Erwin P.; Gottesman, Omri

2014-01-01

This study assessed physician attitudes toward adopting genome-guided prescribing through clinical decision support (CDS), prior to enlisting in the Clinical Implementation of Personalized Medicine through Electronic Health Records and Genomics pilot pharmacogenomics project (CLIPMERGE PGx). We developed a survey instrument that includes the Evidence Based Practice Attitude Scale, adapted to measure attitudes toward adopting genome-informed interventions (EBPAS-GII). The survey also includes items to measure physicians’ characteristics (awareness, experience, and perceived usefulness), attitudes about personal genome testing (PGT) services, and comfort using technology. We surveyed 101 General Internal Medicine physicians from the Icahn School of Medicine at Mount Sinai (ISMMS). The majority were residency program trainees (~88%). Prior to enlisting into CLIPMERGE PGx, most physicians were aware of and had used decision support aids. Few physicians, however, were aware of and had used genome-guided prescribing. The majority of physicians viewed decision support aids and genotype data as being useful for making prescribing decisions. Most physicians had not heard of, but were willing to use, PGT services and felt comfortable interpreting PGT results. Most physicians were comfortable with technology. Physicians who perceived genotype data to be useful in making prescribing decisions, had more positive attitudes toward adopting genome-guided prescribing through CDS. Our findings suggest that internal medicine physicians have a deficit in their familiarity and comfort interpreting and using genomic information. This has reinforced the importance of gathering feedback and guidance from our enrolled physicians when designing genome-guided CDS and the importance of prioritizing genomic medicine education at our institutions. PMID:25562141

Virtual coach technology for supporting self-care.

PubMed

Ding, Dan; Liu, Hsin-Yi; Cooper, Rosemarie; Cooper, Rory A; Smailagic, Asim; Siewiorek, Dan

2010-02-01

"Virtual Coach" refers to a coaching program or device aiming to guide users through tasks for the purpose of prompting positive behavior or assisting with learning new skills. This article reviews virtual coach interventions with the purpose of guiding rehabilitation professionals to comprehend more effectively the essential components of such interventions, the underlying technologies and their integration, and example applications. A design space of virtual coach interventions including self-monitoring, context awareness, interface modality, and coaching strategies were identified and discussed to address when, how, and what coaching messages to deliver in an automated and intelligent way. Example applications that address various health-related issues also are provided to illustrate how a virtual coach intervention is developed and evaluated. Finally, the article provides some insight into addressing key challenges and opportunities in designing and implementing virtual coach interventions. It is expected that more virtual coach interventions will be developed in the field of rehabilitation to support self-care and prevent secondary conditions in individuals with disabilities.

Peterson's Summer Study Abroad: A Guide to Summer Academic and Language Programs. First Edition.

ERIC Educational Resources Information Center

Peterson's Guides, Inc., Princeton, NJ.

This guide provides descriptions of over 900 summer academic and language study-abroad programs in 80 countries that range from 1-week language study courses to full-summer university programs. An introductory section provides general information on study abroad programs and the use of the guide. The bulk of the guide consists of individual…

ReOpt[trademark] V2.0 user guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

White, M K; Bryant, J L

1992-10-01

Cleaning up the large number of contaminated waste sites at Department of Energy (DOE) facilities in the US presents a large and complex problem. Each waste site poses a singular set of circumstances (different contaminants, environmental concerns, and regulations) that affect selection of an appropriate response. Pacific Northwest Laboratory (PNL) developed ReOpt to provide information about the remedial action technologies that are currently available. It is an easy-to-use personal computer program and database that contains data about these remedial technologies and auxiliary data about contaminants and regulations. ReOpt will enable engineers and planners involved in environmental restoration efforts to quicklymore » identify potentially applicable environmental restoration technologies and access corresponding information required to select cleanup activities for DOE sites.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schwab, Amy

The Bioenergy Technologies Office is one of the 10 technology development offices within the Office of Energy Efficiency and Renewable Energy at the U.S. Department of Energy. This Multi-Year Program Plan (MYPP) sets forth the goals and structure of the Bioenergy Technologies Office (the Office). It identifies the research, development, and demonstration (RD&D), and market transformation and crosscutting activities the Office will focus on over the next five years and outlines why these activities are important to meeting the energy and sustainability challenges facing the nation. This MYPP is intended for use as an operational guide to help the Officemore » manage and coordinate its activities, as well as a resource to help communicate its mission and goals to stakeholders and the public.« less

Commercial Foods and Culinary Arts. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This guide identifies considerations in the organization, operation, and evaluation of secondary and postsecondary vocational education programs. It contains both a vocational program guide and Career Merit Achievement Plan (Career MAP) for commercial foods and culinary arts. The guide contains the following sections: occupational description;…

HORIZONTAL CONFIGURATION OF THE LASAGNA (TM) TREATMENT TECHNOLOGY USER GUIDE

EPA Science Inventory

This report is a user's guide that discusses the technology and operations unique to the installation and operation of the horizontal configuration of the Lasagna? integrated soil remediation technology. This technology, called Lasagna? because of the layers of electrodes and tr...

GLOBE Program's Data and Information System

NASA Astrophysics Data System (ADS)

Memarsadeghi, N.; Overoye, D.; Lewis, C.; Butler, D. M.; Ramapriyan, H.

2016-12-01

"The Global Learning and Observations to Benefit the Environment (GLOBE) Program is an international science and education program that provides students and the public worldwide with the opportunity to participate in data collection and the scientific process, and contribute meaningfully to our understanding of the Earth system and global environment" (www.globe.gov ). GLOBE Program has a rich community of students, teachers, scientists, trainers, country coordinators, and alumni across the world, technologically spanning both high- and low-end users. There are 117 GLOBE participating countries from around the world. GLOBE's Science data protocols and educational material span atmosphere, biosphere, hydrosphere, soil (pedosphere), and Earth as a System scientific areas (http://www.globe.gov/do-globe/globe-teachers-guide). GLOBE's Data and Information System (DIS), when first introduced in 1995, was a cutting edge system that was well-received and innovative for its time. However, internet-based technologies have changed dramatically since then. Projects to modernize and evolve the GLOBE DIS started in 2010, resulting in today's GLOBE DIS. The current GLOBE DIS is now built upon the latest information technologies and is engaging and supporting the user community with advanced tools and services to further the goals of the GLOBE Program. GLOBE DIS consists of over 20 years of observation and training data, a rich set of software systems and applications for data entry, visualization, and analysis, as well as tools for training users in various science data protocols and enabling collaborations among members of the international user community. We present the existing GLOBE DIS, application technologies, and lessons learned for their operations, development, sustaining engineering, and data management practices. Examples of GLOBE DIS technologies include Liferay System for integrated user and content management, a Postgress/PostGIS database, Ruby on Rails for Data Entry systems, and OpenGeo for Visualization system.

Smartphone applications to support weight loss: current perspectives

PubMed Central

Pellegrini, Christine A; Pfammatter, Angela F; Conroy, David E; Spring, Bonnie

2015-01-01

Lower cost alternatives are needed for the traditional in-person behavioral weight loss programs to overcome challenges of lowering the worldwide prevalence of overweight and obesity. Smartphones have become ubiquitous and provide a unique platform to aid in the delivery of a behavioral weight loss program. The technological capabilities of a smartphone may address certain limitations of a traditional weight loss program, while also reducing the cost and burden on participants, interventionists, and health care providers. Awareness of the advantages smartphones offer for weight loss has led to the rapid development and proliferation of weight loss applications (apps). The built-in features and the mechanisms by which they work vary across apps. Although there are an extraordinary number of a weight loss apps available, most lack the same magnitude of evidence-based behavior change strategies typically used in traditional programs. As features develop and new capabilities are identified, we propose a conceptual model as a framework to guide the inclusion of features that can facilitate behavior change and lead to reductions in weight. Whereas the conventional wisdom about behavior change asserts that more is better (with respect to the number of behavior change techniques involved), this model suggests that less may be more because extra techniques may add burden and adversely impact engagement. Current evidence is promising and continues to emerge on the potential of smartphone use within weight loss programs; yet research is unable to keep up with the rapidly improving smartphone technology. Future studies are needed to refine the conceptual model’s utility in the use of technology for weight loss, determine the effectiveness of intervention components utilizing smartphone technology, and identify novel and faster ways to evaluate the ever-changing technology. PMID:26236766

Commercial Art. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This document contains a vocational program guide and Career Merit Achievement Plan (Career MAP) for secondary and postsecondary commercial art. The guide contains the following sections: occupational description; program content (curriculum framework and student performance standards); program implementation (student admission criteria,…

Updated Starshade Technology Gap List

NASA Astrophysics Data System (ADS)

Crill, Brendan P.; Siegler, Nicholas

2017-01-01

NASA's Exoplanet Exploration Program (ExEP) guides the development of technology that enables the direct imaging and characterization of exo-Earths in the habitable zone of their stars, for future space observatories. Here we present the Starshade portion of the 2017 ExEP Enabling Technology Gap List, an annual update to ExEP's list of of technology to be advanced in the next 1-5 years. A Starshade is an external occulter on an independent spacecraft, allowing a space telescope to achieve exo-Earth imaging contrast requirements by blocking starlight before it enters the telescope. Building and operating a Starshade requires new technology: the occulter is a structure tens of meters in diameter that must be positioned precisely at a distance of tens of thousands of kilometers from the telescope. We review the current state-of-the-art performance and the performance level that must be achieved for a Starshade.

Technologies Required to Image Earth 2.0 with a Space Coronagraph

NASA Astrophysics Data System (ADS)

Siegler, Nicholas

2017-01-01

NASA's Exoplanet Exploration Program (ExEP) guides the development of technology that enables the direct imaging and characterization of exo-Earths in the habitable zone of their stars for future space observatories. Here we present the coronagraph portion of the 2017 ExEP Technology Gap List, an annual update to ExEP's list of of technologies, to be advanced in the next 1-5 years. A coronagraph is an internal occulter that allows a space telescope to achieve exo-Earth imaging contrast requirements (more than 10 billion) by blocking on-axis starlight while allowing the reflected light of off-axis exoplanets be detected. Building and operating a space coronagraph capable of imaging an exo-Earth will require new technologies beyond those of WFIRST, the first high-contrast conronagraph in space. We review the current state-of-the-art performance of space coronagraphs and the performance level that must be achieved for a coronagraph..

Individualized Education Program (IEP) Planning Guide for Special Education Students Entering High School Vocational Education Programs.

ERIC Educational Resources Information Center

Burrell, Lewis P.

This guide is designed to assist school program planners who are working with mainstreamed special education students in vocational education programs. The guide, covering grades 11 and 12, contains vocational program goals, objectives, and evaluation measures for 30 secondary vocational education programs in 15 curriculum areas, as well as for…

WE-G-BRB-00: NIH-Funded Research: Instrumental in the Pursuit of Clinical Trials and Technological Innovations

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Over the past 20 years the NIH has funded individual grants, program projects grants, and clinical trials which have been instrumental in advancing patient care. The ways that each grant mechanism lends itself to the different phases of translating research into clinical practice will be described. Major technological innovations, such as IMRT and proton therapy, have been advanced with R01-type and P01-type funding and will be discussed. Similarly, the role of program project grants in identifying and addressing key hypotheses on the potential of 3D conformal therapy, normal tissue-guided dose escalation and motion management will be described. An overview willmore » be provided regarding how these technological innovations have been applied to multi-institutional NIH-sponsored trials. Finally, the panel will discuss regarding which research questions should be funded by the NIH to inspire the next advances in radiation therapy. Learning Objectives: Understand the different funding mechanisms of the NIH Learn about research advances that have led to innovation in delivery Review achievements due to NIH-funded program project grants in radiotherapy over the past 20 years Understand example advances achieved with multi-institutional clinical trials NIH.« less

76 FR 58341 - Reports, Forms, and Recordkeeping Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-20

... Columbia. The national survey will be preceded by a pretest administered to 25 respondents. Participation... technology design and potential installation in vehicles. Interviews will average 15 minutes. In conducting... detection technology; Guide the technology design; and Guide a strategy for introduction of this technology...

Building Maintenance. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational Titles…

Recent Advances in Power Conversion and Heat Rejection Technology for Fission Surface Power

NASA Technical Reports Server (NTRS)

Mason, Lee

2010-01-01

Under the Exploration Technology Development Program, the National Aeronautics and Space Administration (NASA) and the Department of Energy (DOE) are jointly developing Fission Surface Power (FSP) technology for possible use in human missions to the Moon and Mars. A preliminary reference concept was generated to guide FSP technology development. The concept consists of a liquid-metal-cooled reactor, Stirling power conversion, and water heat rejection, with Brayton power conversion as a backup option. The FSP project has begun risk reduction activities on some key components with the eventual goal of conducting an end-to-end, non-nuclear, integrated system test. Several power conversion and heat rejection hardware prototypes have been built and tested. These include multi-kilowatt Stirling and Brayton power conversion units, titanium-water heat pipes, and composite radiator panels.

GSFC Information Systems Technology Developments Supporting the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Hughes, Peter; Dennehy, Cornelius; Mosier, Gary; Smith, Dan; Rykowski, Lisa

2004-01-01

The Vision for Space Exploration will guide NASA's future human and robotic space activities. The broad range of human and robotic missions now being planned will require the development of new system-level capabilities enabled by emerging new technologies. Goddard Space Flight Center is actively supporting the Vision for Space Exploration in a number of program management, engineering and technology areas. This paper provides a brief background on the Vision for Space Exploration and a general overview of potential key Goddard contributions. In particular, this paper focuses on describing relevant GSFC information systems capabilities in architecture development; interoperable command, control and communications; and other applied information systems technology/research activities that are applicable to support the Vision for Space Exploration goals. Current GSFC development efforts and task activities are presented together with future plans.

Developing a User Guide to Integrating New Technologies in Science Teaching and Learning: Teachers' and Pupils' Perceptions of Their Affordances

ERIC Educational Resources Information Center

de Winter, James; Winterbottom, Mark; Wilson, Elaine

2010-01-01

This paper reports outcomes of a project in which five teachers developed a web-based user guide to integrating new technologies in secondary science teaching. The guide aimed to support the initial education of trainee teachers, and the professional development of mentors, in working with, and understanding the affordances of, new technologies.…

A practical guide to self-sustaining point-of-care ultrasound education programs in resource-limited settings.

PubMed

Henwood, Patricia C; Mackenzie, David C; Rempell, Joshua S; Murray, Alice F; Leo, Megan M; Dean, Anthony J; Liteplo, Andrew S; Noble, Vicki E

2014-09-01

The value of point-of-care ultrasound education in resource-limited settings is increasingly recognized, though little guidance exists on how to best construct a sustainable training program. Herein we offer a practical overview of core factors to consider when developing and implementing a point-of-care ultrasound education program in a resource-limited setting. Considerations include analysis of needs assessment findings, development of locally relevant curriculum, access to ultrasound machines and related technological and financial resources, quality assurance and follow-up plans, strategic partnerships, and outcomes measures. Well-planned education programs in these settings increase the potential for long-term influence on clinician skills and patient care. Copyright © 2014 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

A guide to federal-aid programs and projects

DOT National Transportation Integrated Search

1999-05-01

This guide provides basic information about Federal-aid programs, projects, and other program characteristics. The information sheets contained in the guide provide fiscal information, statutory and regulatory references, general eligibility and back...

An Analysis of Measures Used to Evaluate the Air Force Critical Item Program

DTIC Science & Technology

1991-09-01

example of a histogram. Cause & Effect Diagram. The cause and effect diagram was introduced in 1953 by Dr. Kaoru Ishikawa in summarizing the opinions of...Personal Interview. Air Force Institute of Technology, School of Engineering, Wright-Patterson AFB OH, 24 April 1991. 31. Ishikawa , Dr. Kaoru . Guide to...collected. How the data are collected will determine which measurement techniques are appropriate. Ishikawa classifies data collection into five categories

Materials Genome Initiative Element

NASA Technical Reports Server (NTRS)

Vickers, John

2015-01-01

NASA is committed to developing new materials and manufacturing methods that can enable new missions with ever increasing mission demands. Typically, the development and certification of new materials and manufacturing methods in the aerospace industry has required more than 20 years of development time with a costly testing and certification program. To reduce the cost and time to mature these emerging technologies, NASA is developing computational materials tools to improve understanding of the material and guide the certification process.

14 CFR 1203.412 - Classification guides.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 5 2013-01-01 2013-01-01 false Classification guides. 1203.412 Section... PROGRAM Guides for Original Classification § 1203.412 Classification guides. (a) General. A classification guide, based upon classification determinations made by appropriate program and classification...

14 CFR 1203.412 - Classification guides.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 5 2012-01-01 2012-01-01 false Classification guides. 1203.412 Section... PROGRAM Guides for Original Classification § 1203.412 Classification guides. (a) General. A classification guide, based upon classification determinations made by appropriate program and classification...

Transfer of computer software technology through workshops: The case of fish bioenergetics modeling

USGS Publications Warehouse

Johnson, B.L.

1992-01-01

A three-part program is proposed to promote the availability and use of computer software packages to fishery managers and researchers. The approach consists of journal articles that announce new technologies, technical reports that serve as user's guides, and hands-on workshops that provide direct instruction to new users. Workshops, which allow experienced users to directly instruct novices in software operation and application are important, but often neglected. The author's experience with organizing and conducting bioenergetics modeling workshops suggests the optimal workshop would take 2 days, have 10-15 participants, one computer for every two users, and one instructor for every 5-6 people.

Basic Automotive Mechanics. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a basic automotive mechanics program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary of Occupational…

Sustainable transportation : technology, engineering, and science : summer camp instructor’s guide.

DOT National Transportation Integrated Search

2014-03-01

This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

Sustainable transportation : technology, engineering, and science - summer camp instructor's guide.

DOT National Transportation Integrated Search

2014-03-01

This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

Molecular biomarkers to guide precision medicine in localized prostate cancer.

PubMed

Smits, Minke; Mehra, Niven; Sedelaar, Michiel; Gerritsen, Winald; Schalken, Jack A

2017-08-01

Major advances through tumor profiling technologies, that include next-generation sequencing, epigenetic, proteomic and transcriptomic methods, have been made in primary prostate cancer, providing novel biomarkers that may guide precision medicine in the near future. Areas covered: The authors provided an overview of novel molecular biomarkers in tissue, blood and urine that may be used as clinical tools to assess prognosis, improve selection criteria for active surveillance programs, and detect disease relapse early in localized prostate cancer. Expert commentary: Active surveillance (AS) in localized prostate cancer is an accepted strategy in patients with very low-risk prostate cancer. Many more patients may benefit from watchful waiting, and include patients of higher clinical stage and grade, however selection criteria have to be optimized and early recognition of transformation from localized to lethal disease has to be improved by addition of molecular biomarkers. The role of non-invasive biomarkers is challenging the need for repeat biopsies, commonly performed at 1 and 4 years in men under AS programs.

The application of digital medical 3D printing technology on tumor operation

NASA Astrophysics Data System (ADS)

Chen, Jimin; Jiang, Yijian; Li, Yangsheng

2016-04-01

Digital medical 3D printing technology is a new hi-tech which combines traditional medical and digital design, computer science, bio technology and 3D print technology. At the present time there are four levels application: The printed 3D model is the first and simple application. The surgery makes use of the model to plan the processing before operation. The second is customized operation tools such as implant guide. It helps doctor to operate with special tools rather than the normal medical tools. The third level application of 3D printing in medical area is to print artificial bones or teeth to implant into human body. The big challenge is the fourth level which is to print organs with 3D printing technology. In this paper we introduced an application of 3D printing technology in tumor operation. We use 3D printing to print guide for invasion operation. Puncture needles were guided by printed guide in face tumors operation. It is concluded that this new type guide is dominantly advantageous.

Building Maintenance and Utilities Management. Florida Vocational Program Guide.

ERIC Educational Resources Information Center

University of South Florida, Tampa. Dept. of Adult and Vocational Education.

This program guide identifies primary concerns in the organization, operation, and evaluation of a building maintenance and utilities management program. It is designed for local school district and community college administrators, instructors, program advisory committees, and regional coordinating councils. The guide begins with the Dictionary…

The Role of the Occupational and Physical Therapist in Assistive Technology. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Reed, Penny; Bowser, Gayl

This guide defines assistive technology as specialized hardware and software equipment used by students with disabilities to increase their ability to participate in tasks of learning and daily living and function as independently as possible. Types of assistive technology are listed, and information resources about assistive technology are noted.…

Technology for Work, Home, and Leisure. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Williams, John M.

This guide provides a brief introduction to several types of technological devices useful to individuals with disabilities and illustrates how some individuals are applying technology in the workplace and at home. Devices described include communication aids, low-vision products, voice-activated systems, environmental controls, and aids for…

Construction Technologies. Guide to Standards and Implementation. Career & Technology Studies.

ERIC Educational Resources Information Center

Alberta Dept. of Education, Edmonton. Curriculum Standards Branch.

With this Career and Technology Studies (CTS) curriculum guide, secondary students in Alberta can do the following; develop skills that can be applied in their daily lives; refine career-planning skills; develop technology-related skills in construction; enhance employability skills, especially in construction industries; and apply and reinforce…

Technology Education in Maine. Curriculum Guide.

ERIC Educational Resources Information Center

Maine State Dept. of Educational and Cultural Services, Augusta. Bureau of Vocational Education.

This curriculum guide presents basic definitions, models, and examples as a framework that individual technology education instructors or departments can use to construct their own units, courses, and curricula at any level. An overview describes the development of the model and the content of technology education. Section I explains technology.…

Industrial Technology Orientation Curriculum Guide.

ERIC Educational Resources Information Center

Illinois State Board of Education, Springfield. Dept. of Adult, Vocational and Technical Education.

The four courses in this guide were designed to meet the specifications for the career orientation level of Illinois' Education for Employment Curriculum Model. These orientation-level courses can be taken by high school students in any sequence: (1) communication technology; (2) energy utilization technology; (3) production technology; and (4)…

Summer-Jobs-for-Youth Program Guide. How to Develop and Manage a Summer Youth Jobs Program. A Technical Assistance Guide.

ERIC Educational Resources Information Center

National Alliance of Business, Inc., Washington, DC.

This guide offers a practical approach for operating summer youth employment programs that involves cooperation among private businesses and local organizations. A timetable provides a month-by-month schedule. Seven sections discuss management responsibilities. Program Planning covers scope, goals, and coordination. Program Management addresses…

Unidata: Community, Science, and Technology; in that order.

NASA Astrophysics Data System (ADS)

Young, J. W.; Ramamurthy, M. K.; Davis, E.

2015-12-01

Unidata's mission is to provide the data services, tools, and cyberinfrastructure leadership that advance Earth system science, enhance educational opportunities, and broaden participation. The Unidata community has grown from around 250 individual participants in the early years to tens of thousands of users in over 150 countries. Today, Unidata's products and services are used on every continent and by every sector of the geoscience enterprise: universities, government agencies, private sector, and other non-governmental organizations. Certain traits and ethos are shared by and common to most successful organizations. They include a healthy organizational culture grounded by some core values and guiding principles. In that environment, there is an implicit awareness of the connection between mission of an organization, its values, and its day-to-day activities, and behaviours of a passionate staff. Distinguishing characteristics include: vigorous engagement of the community served by those organizations backed by strong and active governance, unwavering commitment to seek input and feedback from users, and trust of those users, earned over many years through consistent, dependable, and high-quality service. Meanwhile, changing data volumes and standards, new computing power, and expanding scientific questions sound continue to shape the geoscience community. These issues were the drivers for founding Unidata, a cornerstone data facility, in 1984. Advances in geoscience occur at the junction of community, science, and technology and this submission will feature lessons from Unidata's thirty year history operating at this nexus. Specifically, this presentation will feature guiding principles for the program, governance mechanisms, and approaches for balancing science and technology in a community-driven program.

NASA Engineering and Technology Advancement Office: A proposal to the administrator

NASA Technical Reports Server (NTRS)

Schulze, Norman R.

1993-01-01

NASA has continually had problems with cost, schedule, performance, reliability, quality, and safety aspects in programs. Past solutions have not provided the answers needed, and a major change is needed in the way of doing business. A new approach is presented for consideration. These problems are all engineering matters, and therefore, require engineering solutions. Proper engineering tools are needed to fix engineering problems. Headquarters is responsible for providing the management structure to support programs with appropriate engineering tools. A guide to define those tools and an approach for putting them into place is provided. Recommendations include establishing a new Engineering and Technology Advancement Office, requesting a review of this proposal by the Administrator since this subject requires a top level decision. There has been a wide peer review conducted by technical staff at Headquarters, the Field Installations, and others in industry as discussed.

14 CFR § 1203.412 - Classification guides.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Classification guides. § 1203.412 Section... PROGRAM Guides for Original Classification § 1203.412 Classification guides. (a) General. A classification guide, based upon classification determinations made by appropriate program and classification...

Digital video technology and production 101: lights, camera, action.

PubMed

Elliot, Diane L; Goldberg, Linn; Goldberg, Michael J

2014-01-01

Videos are powerful tools for enhancing the reach and effectiveness of health promotion programs. They can be used for program promotion and recruitment, for training program implementation staff/volunteers, and as elements of an intervention. Although certain brief videos may be produced without technical assistance, others often require collaboration and contracting with professional videographers. To get practitioners started and to facilitate interactions with professional videographers, this Tool includes a guide to the jargon of video production and suggestions for how to integrate videos into health education and promotion work. For each type of video, production principles and issues to consider when working with a professional videographer are provided. The Tool also includes links to examples in each category of video applications to health promotion.