Free piston space Stirling technology program

NASA Technical Reports Server (NTRS)

Dochat, G. R.; Dhar, M.

1989-01-01

MTI recently completed an initial technology feasibility program for NASA by designing, fabricating and testing a space power demonstrator engine (SPDE). This program, which confirms the potential of free-piston Stirling engines, provided the major impetus to initiate a free-piston Stirling space engine (SSE) technology program. The accomplishments of the SPDE program are reviewed, and an overview of the SSE technology program and technical status to date is provided. It is shown that progress in both programs continues to justify its potential for either nuclear or solar space power missions.

The West Virginia Special Education Technology Integration Specialist (SETIS) Program: 2012-2014 Evaluation Report

ERIC Educational Resources Information Center

Stohr, Amber D.

2015-01-01

The Special Education Technology Integration Specialist (SETIS) program provides professional development for special education teachers to assist them in achieving proficiency with 21st Century Technology Tools. The program completed its eighth and ninth rounds during the 2012-2013 and 2013-2014 school years, training more than 30 special…

Advanced Technologies for Transportation Research Program at the University of Tennessee at Chattanooga

DOT National Transportation Integrated Search

2009-01-30

This report documents the results of the research program completed by the Advanced Technologies for Transportation Research Program (ATTRP) at the University of Tennessee at Chattanooga (UTC) under Federal Transit Administration Cooperative Agreemen...

NASA'S information technology activities for the 90's

NASA Technical Reports Server (NTRS)

Holcomb, Lee; Erickson, Dan

1991-01-01

The Office of Aeronautics, Exploration and Technology (OAET) is completing an extensive assessment of its nearly five hundred million dollars of proposed space technology development work. The budget is divided into four segments which are as follows: (1) the base research and technology program; (2) the Civil Space Technology Initiative (CSTI); (3) the Exploration Technology Program (ETP); and (4) the High Performance Computing Initiative (HPCI). The programs are briefly discussed in the context of Astrotech 21.

VERIFYING CLEANER TECHNOLOGIES WITH EPA'S ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM

EPA Science Inventory

The US EPA's Office of Research and Development Environmental Technology Verification (ETV) Program completed its five-year pilot period in 2001. Now in 2002 lessons learned in the pilot period are being incorporated seamlessly into six operating ETV Centers which cover technolo...

Experiences of Turkish Student Teachers in Pedagogy and Educational Technology during an Internship Program in the US

ERIC Educational Resources Information Center

Sahin, Ismail; Toy, Serkan

2009-01-01

This quantitative research study was conducted to examine technological and pedagogical experiences of Turkish student teachers in a US Department of State sponsored international internship program. The internship program had a specific emphasis on student-centered teaching and technology integration. Turkish interns completed a 6-week teaching…

Differences in Adaptive Competency Acquisition between Traditionally Certified and Alternatively Certified Technology Education Teachers.

ERIC Educational Resources Information Center

Coyle-Rogers, Patricia G.; Rogers, George E.

A study determined whether there are any differences in the adaptive competency acquisition between technology education teachers who have completed a school district add-on alternative certification process and technology education teachers who completed a traditional baccalaureate degree certification program. Non-probability sampling was used…

Funding and Strategic Alignment Guidance for Infusing Small Business Innovation Research Technology Into Human Exploration and Operations Mission Directorate Projects at Glenn Research Center for 2015

NASA Technical Reports Server (NTRS)

Nguyen, Hung D.; Steele, Gynelle C.

2016-01-01

This report is intended to help NASA program and project managers incorporate Glenn Research Center Small Business Innovation Research/Small Business Technology Transfer (SBIR)/(STTR) technologies into NASA Human Exploration and Operations Mission Directorate (HEOMD) programs and projects. Other Government and commercial project managers can also find this useful. Introduction Incorporating Small Business Innovation Research (SBIR)-developed technology into NASA projects is important, especially given the Agency's limited resources for technology development. The SBIR program's original intention was for technologies that had completed Phase II to be ready for integration into NASA programs, however, in many cases there is a gap between Technology Readiness Levels (TRLs) 5 and 6 that needs to be closed. After SBIR Phase II projects are completed, the technology is evaluated against various parameters and a TRL rating is assigned. Most programs tend to adopt more mature technologies-at least TRL 6 to reduce the risk to the mission rather than adopt TRLs between 3 and 5 because those technologies are perceived as too risky. The gap between TRLs 5 and 6 is often called the "Valley of Death" (Figure 1), and historically it has been difficult to close because of a lack of funding support from programs. Several papers have already suggested remedies on how to close the gap (Refs. 1 to 4).

Indexing NASA programs for technology transfer methods development and feasibility

NASA Technical Reports Server (NTRS)

Clingman, W. H.

1972-01-01

This project was undertaken to evaluate the application of a previously developed indexing methodology to ongoing NASA programs. These programs are comprehended by the NASA Program Approval Documents (PADS). Each PAD contains a technical plan for the area it covers. It was proposed that these could be used to generate an index to the complete NASA program. To test this hypothesis two PADS were selected by the NASA Technology Utilization Office for trial indexing. Twenty-five individuals indexed the two PADS using NASA Thesaurus terms. The results demonstrated the feasibility of indexing ongoing NASA programs using PADS as the source of information. The same indexing methodology could be applied to other documents containing a brief description of the technical plan. Results of this project showed that over 85% of the concepts in the technology should be covered by the indexing. Also over 85% of the descriptors chosen would be accurate. This completeness and accuracy for the indexing is considered satisfactory for application in technology transfer.

The Integrative Model of Behavior Prediction to Explain Technology Use in Post-Graduate Teacher Education Programs in the Netherlands

ERIC Educational Resources Information Center

Admiraal, Wilfried; Lockhorst, Ditte; Smit, Ben; Weijers, Sanne

2013-01-01

This study examined technology in post-graduate teacher training programs in the Netherlands. A questionnaire was completed by 111 teacher educators from 12 Dutch universities with a post-graduate teacher training program. The general view of the use of technology in Dutch post-graduate teacher education was quite conventional. Basic technology…

Hyper-X: Flight Validation of Hypersonic Airbreathing Technology

NASA Technical Reports Server (NTRS)

Rausch, Vincent L.; McClinton, Charles R.; Crawford, J. Larry

1997-01-01

This paper provides an overview of NASA's focused hypersonic technology program, i.e. the Hyper-X program. This program is designed to move hypersonic, air breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. This paper presents some history leading to the flight test program, research objectives, approach, schedule and status. Substantial experimental data base and concept validation have been completed. The program is concentrating on Mach 7 vehicle development, verification and validation in preparation for wind tunnel testing in 1998 and flight testing in 1999. It is also concentrating on finalization of the Mach 5 and 10 vehicle designs. Detailed evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a data base for validation of design methods once flight test data are available.

Space Storable Rocket Technology program (SSRT). Option 1 program

NASA Astrophysics Data System (ADS)

Chazen, Melvin L.; Mueller, Thomas; Rust, Thomas

1993-08-01

The Space Storable Rocket Technology (SSRT) Option 1 Program was initiated in October 1991 after completion of the Basic Program. The program was restructured in mid-July 1992 to incorporate a Rhenium Technology Task and reduce the scope of the LO2-N2H4 engine development. The program was also extended to late February 1993 to allow for the Rhenium Technology Task completion. The Option 1 Program was devoted to evaluation of two new injector elements, evaluation of two different methods of thermal protection of the injector, evaluation of high temperature material properties of rhenium and evaluation of methods of joining the rhenium thrust chamber to the columbium injector and nozzle extension. In addition, critical experiments were conducted (Funded by Option 2) to evaluate mechanisms to understand the effects of GO2 injection into the chamber, helium injection into the main LO2, effect of the splash plate and effect of decreasing the aspect ratio of the 120-slot (-13a) element. The performance and thermal models were used to further correlate the test results with analyses. The results of the work accomplished are summarized.

Space Storable Rocket Technology program (SSRT). Option 1 program

NASA Technical Reports Server (NTRS)

Chazen, Melvin L.; Mueller, Thomas; Rust, Thomas

1993-01-01

The Space Storable Rocket Technology (SSRT) Option 1 Program was initiated in October 1991 after completion of the Basic Program. The program was restructured in mid-July 1992 to incorporate a Rhenium Technology Task and reduce the scope of the LO2-N2H4 engine development. The program was also extended to late February 1993 to allow for the Rhenium Technology Task completion. The Option 1 Program was devoted to evaluation of two new injector elements, evaluation of two different methods of thermal protection of the injector, evaluation of high temperature material properties of rhenium and evaluation of methods of joining the rhenium thrust chamber to the columbium injector and nozzle extension. In addition, critical experiments were conducted (Funded by Option 2) to evaluate mechanisms to understand the effects of GO2 injection into the chamber, helium injection into the main LO2, effect of the splash plate and effect of decreasing the aspect ratio of the 120-slot (-13a) element. The performance and thermal models were used to further correlate the test results with analyses. The results of the work accomplished are summarized.

78 FR 65298 - Information Collection; Submission for OMB Review, Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-31

..., electronic, mechanical, or other technological collection techniques or other forms of information technology... not change. Three rounds of user acceptance testing were completed by AmeriCorps program staff in June... recognizes that retention rates may vary among effective programs depending on the program model. CNCS will...

A case history of technology transfer

NASA Technical Reports Server (NTRS)

1981-01-01

A sequence of events, occurring over the last 25 years, are described that chronicle the evolution of ion-bombardment electric propulsion technology. Emphasis is placed on the latter phases of this evolution, where special efforts were made to pave the way toward the use of this technology in operational space flight systems. These efforts consisted of a planned program to focus the technology toward its end applications and an organized process that was followed to transfer the technology from the research-technology NASA Center to the user-development NASA Center and its industry team. Major milestones in this evolution, which are described, include the development of thruster technology across a large size range, the successful completion of two space electric rocket tests, SERT I and SERT II, development of power-processing technology for electric propulsion, completion of a program to make the technology ready for flight system development, and finally the technology transfer events.

Assigning a Thesis Project In the Two-Year Architectural Technology Program

ERIC Educational Resources Information Center

Obermeyer, Thomas

1977-01-01

The "thesis project" assigned in the sixth quarter of the eight-quarter architectural technology program at the Dakota County Area Vocational-Technical Institute in Rosemont, Minnesota, requires the students to design a building for a local public service organization or government agency. The complete project will include a program, a…

What Works! Encouraging Diversity in Science, Mathematics, Engineering, and Technology through Effective Mentoring. A 5-Year Overview of the Research Careers for Minority Scholars Program.

ERIC Educational Resources Information Center

National Science Foundation, Arlington, VA. Directorate for Education and Human Resources.

The National Science Foundation's (NSF) Research Careers for Minority Scholars (RCMS) program was initiated to encourage individuals from underrepresented groups in science, mathematics, engineering and technology (SMET) disciplines to complete undergraduate degree programs and matriculate to SMET graduate degree programs. This report describes…

JTEC/WTEC annual report and program summary: 1993/94

NASA Technical Reports Server (NTRS)

Holdridge, Geoffrey M. (Editor)

1994-01-01

The JTEC/WTEC (Japanese Technology Evaluation Center/World Technology Evaluation Center) Program at Loyola College is overviewed. A review of activities for 1993 and early 1994 is discussed along with plans for the following year. The bulk of the report consists of the summaries of completed projects in Information and Communication Technology; Materials; Manufacturing and Construction; Aeronautics, Space, and Ocean Technology; Energy; and Biotechnology.

Rover and Telerobotics Technology Program

NASA Technical Reports Server (NTRS)

Weisbin, Charles R.

1998-01-01

The Jet Propulsion Laboratory's (JPL's) Rover and Telerobotics Technology Program, sponsored by the National Aeronautics and Space Administration (NASA), responds to opportunities presented by NASA space missions and systems, and seeds commerical applications of the emerging robotics technology. The scope of the JPL Rover and Telerobotics Technology Program comprises three major segments of activity: NASA robotic systems for planetary exploration, robotic technology and terrestrial spin-offs, and technology for non-NASA sponsors. Significant technical achievements have been reached in each of these areas, including complete telerobotic system prototypes that have built and tested in realistic scenarios relevant to prospective users. In addition, the program has conducted complementary basic research and created innovative technology and terrestrial applications, as well as enabled a variety of commercial spin-offs.

Harvard University Program on Technology and Society 1964-1972. A Final Review.

ERIC Educational Resources Information Center

Harvard Univ., Cambridge, MA. Program on Technology and Society.

Eight years of research by the Harvard University's Program on Technology and Society are summarized. Lengthy abstracts of the 29 books and 164 articles that resulted from the Program, as well as interim accounts of projects not yet completed are presented. The report is divided into four parts; institutions (including business, education, and…

45 CFR 170.470 - Effect of revocation on the certifications issued to complete EHRs and EHR Modules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary...

45 CFR 170.470 - Effect of revocation on the certifications issued to complete EHRs and EHR Modules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary...

45 CFR 170.470 - Effect of revocation on the certifications issued to complete EHRs and EHR Modules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary...

45 CFR 170.470 - Effect of revocation on the certifications issued to complete EHRs and EHR Modules.

Code of Federal Regulations, 2010 CFR

2010-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary...

45 CFR 170.470 - Effect of revocation on the certifications issued to complete EHRs and EHR Modules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Temporary...

Impact of Frequent Interruption on Nurses' Patient-Controlled Analgesia Programming Performance.

PubMed

Campoe, Kristi R; Giuliano, Karen K

2017-12-01

The purpose was to add to the body of knowledge regarding the impact of interruption on acute care nurses' cognitive workload, total task completion times, nurse frustration, and medication administration error while programming a patient-controlled analgesia (PCA) pump. Data support that the severity of medication administration error increases with the number of interruptions, which is especially critical during the administration of high-risk medications. Bar code technology, interruption-free zones, and medication safety vests have been shown to decrease administration-related errors. However, there are few published data regarding the impact of number of interruptions on nurses' clinical performance during PCA programming. Nine acute care nurses completed three PCA pump programming tasks in a simulation laboratory. Programming tasks were completed under three conditions where the number of interruptions varied between two, four, and six. Outcome measures included cognitive workload (six NASA Task Load Index [NASA-TLX] subscales), total task completion time (seconds), nurse frustration (NASA-TLX Subscale 6), and PCA medication administration error (incorrect final programming). Increases in the number of interruptions were associated with significant increases in total task completion time ( p = .003). We also found increases in nurses' cognitive workload, nurse frustration, and PCA pump programming errors, but these increases were not statistically significant. Complex technology use permeates the acute care nursing practice environment. These results add new knowledge on nurses' clinical performance during PCA pump programming and high-risk medication administration.

Course Management System's Compatibility with Teaching Style Influences Willingness to Complete Training

ERIC Educational Resources Information Center

Pereira, Audrey Smith; Wahi, Monika Maya

2017-01-01

Although course management systems (CMSs) provide technology platforms that help faculty members adopt better techniques for teaching and learning, and training contributes to faculty information technology (IT) use, many higher education faculty members do not complete CMS training programs, resulting in underuse of CMSs. Therefore, the overall…

45 CFR 170.570 - Effect of revocation on the certifications issued to Complete EHRs and EHR Module(s).

Code of Federal Regulations, 2013 CFR

2013-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT...

45 CFR 170.570 - Effect of revocation on the certifications issued to Complete EHRs and EHR Module(s).

Code of Federal Regulations, 2011 CFR

2011-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent...

45 CFR 170.570 - Effect of revocation on the certifications issued to Complete EHRs and EHR Module(s).

Code of Federal Regulations, 2012 CFR

2012-10-01

... HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Permanent...

45 CFR 170.570 - Effect of revocation on the certifications issued to Complete EHRs and EHR Module(s).

Code of Federal Regulations, 2014 CFR

2014-10-01

... Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY ONC HIT...

Performance Optimization of Storable Bipropellant Engines to Fully Exploit Advanced Material Technologies

NASA Technical Reports Server (NTRS)

Miller, Scott; Henderson, Scott; Portz, Ron; Lu, Frank; Wilson, Kim; Krismer, David; Alexander, Leslie; Chapman, Jack; England, Chris

2007-01-01

This paper summarizes the work performed to dale on the NASA Cycle 3A Advanced Chemical Propulsion Technology Program. The primary goals of the program are to design, fabricate, and test high performance bipropellant engines using iridium/rhenium chamber technology to obtain 335 seconds specific impulse with nitrogen tetroxide/hydrazine propellants and 330 seconds specific impulse with nitrogen tetroxide/monomethylhydrazine propellants. Aerojet has successfully completed the Base Period of this program, wherein (1) mission and system studies have been performed to verify system performance benefits and to determine engine physical and operating parameters, (2) preliminary chamber and nozzle designs have been completed and a chamber supplier has been downselected, (3) high temperature, high pressure off-nominal hot fire testing of an existing state-of-the-art high performance bipropellant engine has been completed, and (4) thermal and performance data from the engine test have been correlated with new thermal models to enable design of the new engine injector and injector/chamber interface. In the next phase of the program, Aerojet will complete design, fabrication, and test of the nitrogen tetroxide/hydrazine engine to demonstrate 335 seconds specific impulse, and also investigate improved technologies for iridium/rhenium chamber fabrication. Achievement of the NRA goals will significantly benefit NASA interplanetary missions and other government and commercial opportunities by enabling reduced launch weight and/or increased payload. At the conclusion of the program, the objective is to have an engine ready for final design and qualification for a specific science mission or commercial application. The program also constitutes a stepping stone to future, development, such as higher pressure pump-fed in-space storable engines.

76 FR 1261 - Establishment of the Permanent Certification Program for Health Information Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-07

...This final rule establishes a permanent certification program for the purpose of certifying health information technology (HIT). This final rule is issued pursuant to the authority granted to the National Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public Health Service Act (PHSA), as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act. The permanent certification program will eventually replace the temporary certification program that was previously established by a final rule. The National Coordinator will use the permanent certification program to authorize organizations to certify electronic health record (EHR) technology, such as Complete EHRs and/or EHR Modules. The permanent certification program could also be expanded to include the certification of other types of HIT.

Technology advancement of the static feed water electrolysis process

NASA Technical Reports Server (NTRS)

Schubert, F. H.; Wynveen, R. A.

1977-01-01

A program to advance the technology of oxygen- and hydrogen-generating subsystems based on water electrolysis was studied. Major emphasis was placed on static feed water electrolysis, a concept characterized by low power consumption and high intrinsic reliability. The static feed based oxygen generation subsystem consists basically of three subassemblies: (1) a combined water electrolysis and product gas dehumidifier module; (2) a product gas pressure controller and; (3) a cyclically filled water feed tank. Development activities were completed at the subsystem as well as at the component level. An extensive test program including single cell, subsystem and integrated system testing was completed with the required test support accessories designed, fabricated, and assembled. Mini-product assurance activities were included throughout all phases of program activities. An extensive number of supporting technology studies were conducted to advance the technology base of the static feed water electrolysis process and to resolve problems.

45 CFR 170.553 - Certification of health information technology other than Complete EHRs and EHR Modules.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 1 2011-10-01 2011-10-01 false Certification of health information technology... AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY Permanent Certification Program for HIT § 170.553 Certification of health information technology...

45 CFR 170.553 - Certification of health information technology other than Complete EHRs and EHR Modules.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Certification of health information technology... and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY ONC HIT Certification Program § 170.553 Certification of health information technology other than...

45 CFR 170.553 - Certification of health information technology other than Complete EHRs and EHR Modules.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 1 2012-10-01 2012-10-01 false Certification of health information technology... AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY Permanent Certification Program for HIT § 170.553 Certification of health information technology...

45 CFR 170.553 - Certification of health information technology other than Complete EHRs and EHR Modules.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Certification of health information technology... AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS... TECHNOLOGY ONC HIT Certification Program § 170.553 Certification of health information technology other than...

Investigating Value Creation in a Community of Practice with Social Network Analysis in a Hybrid Online Graduate Education Program

ERIC Educational Resources Information Center

Cowan, John E.; Menchaca, Michael P.

2014-01-01

This study reports an analysis of 10?years in the life of the Internet-based Master in Educational Technology program (iMET) at Sacramento State University. iMET is a hybrid educational technology master's program delivered 20% face to face and 80% online. The program has achieved a high degree of success, with a course completion rate of 93% and…

The Self-Reported Impact of Graduate Program Completion on the Careers and Plans of Graduates

ERIC Educational Resources Information Center

Fahy, Patrick J.; Spencer, Bob; Halinski, Tara

2008-01-01

The Centre for Distance Education, Athabasca University, commenced a survey of all graduates of its two programs, the master of distance education (MDE) degree, and the graduate diploma (GD) in technology, in late 2006. Alumni were asked how program completion had affected their careers, and their plans for the future. A total of 84 graduates…

Advanced composites technology program

NASA Technical Reports Server (NTRS)

Davis, John G., Jr.

1993-01-01

This paper provides a brief overview of the NASA Advanced Composites Technology (ACT) Program. Critical technology issues that must be addressed and solved to develop composite primary structures for transport aircraft are delineated. The program schedule and milestones are included. Work completed in the first 3 years of the program indicates the potential for achieving composite structures that weigh less and are cost effective relative to conventional aluminum structure. Selected technical accomplishments are noted. Readers who are seeking more in-depth technical information should study the other papers included in these proceedings.

Digital Denture Fabrication in Pre- and Postdoctoral Education: A Survey of U.S. Dental Schools.

PubMed

Fernandez, Monica A; Nimmo, Arthur; Behar-Horenstein, Linda S

2016-01-01

To survey chairs of prosthodontics or restorative departments and program directors of postdoctoral prosthodontic programs in the United States regarding digital denture fabrication. The key objectives of the survey were to identify the current trends in complete denture fabrication using CAD/CAM technology and to determine how and to what extent this technique is taught and used in U.S. pre- and postdoctoral prosthodontic programs. An invitation to participate in an online survey was sent to 52 prosthodontics/restorative chairs of U.S. dental schools and to all of the 50 program directors of postdoctoral prosthodontics programs. A version of the survey with the same questions was sent to a national sample of prosthodontics/restorative chairs and program directors of postdoctoral prosthodontics. The 20-item survey took approximately 15 minutes to complete. Dependent samples paired t-test was run on items that were the same in both surveys. The response rate for the survey was 63% for department chairs and 44% for program directors. All respondents with the exception of one department chair were aware of CAD/CAM technology used for denture fabrication. More than half of the program directors (52.4%) compared to 12.1% of chairs have incorporated some aspects of CAD/CAM denture fabrication technology into their curriculum. When asked if the fabrication cost prevented introducing this technology in the predoctoral/postdoctoral curriculum, 52.4% of the department chairs affirmed this response compared to 12.1% of the program directors. There was a significant difference between groups when asked if they had incorporated the CAD/CAM denture fabrication technique into the postgraduate/predoctoral curriculum. Department chairs reported less usage of CAD/CAM technology. Only 12.1% of department chairs reported using some aspects of CAD/CAM technology in the predoctoral curriculum compared to 52.4% in the postdoctoral curriculum (F = 13.528, p ≤ 0.001). While this technology is used in four predoctoral clinics, none of the chairs reported including CAD/CAM denture fabrication in their preclinical complete denture courses. For the schools using the technology, 33.3% of postdoctoral and 30.3% of predoctoral programs use it to make a denture with a try-in step; however, 19% of the postdoctoral and 18.2% of predoctoral programs process the dentures without a try-in appointment. Slightly less than half (42.9%) of graduate programs are using the technology to make just the denture bases. Only a small proportion (10% or less) of the total number of dentures processed in post- and predoctoral programs are made using CAD/CAM technology. The proportion of postdoctoral programs that process cases using CAD/CAM technology was significantly higher than in predoctoral programs (F = 5.106, p ≤ 0.028). Many schools indicated that they are in a "trial phase" to evaluate the technique, especially at the predoctoral level. Also, 19% (n = 4) of postdoctoral and 15.2% (n = 5) of predoctoral respondents have created continuing education courses. Of postdoctoral programs, 38.1% (n = 8) plan to introduce this technology at some point in the near future (next 1 to 4 years); 27.3% of predoctoral programs plan to as well. All program directors and department chairs who participated in the survey are aware of this technology with the exception of one department chair. More than half of the program directors reported that they have incorporated this technology in their curricula compared to only 12% of department chairs. Currently, only 10% or less of complete denture cases are processed using the CAD/CAM technology, at either the post- or predoctoral levels. Both groups reported that the main use of this technology is for the fabrication of denture bases and for processing dentures including the try-in step. The majority of respondents in both groups indicated they plan to add digital denture fabrication into their curricula within the next 1 to 4 years. © 2015 by the American College of Prosthodontists.

The Complete Picture: "Standards for Technological Literacy" and "Advancing Excellence in Technological Literacy."

ERIC Educational Resources Information Center

Technology Teacher, 2003

2003-01-01

Provides an overview of the "Standards for Technological Literacy: Content for the Study of Technology" (STL) and "Advancing Excellence in Technological Literacy: Student Assessment, Professional Development, and Program Standards" (AETL). Shows how the documents work together to advance the technological literacy of technology educators and K-12…

Diploma Recovery: High School Graduates' Perceptions of Online Credit Recovery Programming

ERIC Educational Resources Information Center

Currier, Clay W.

2017-01-01

This phenomenological case study explored student experiences in a technology-based credit recovery program at several central Texas high schools. Students shared their perceptions about utilizing technology-based credit recovery environments. Participants in this study were ten high school graduates who had completed credit recovery courses at…

Tri-Lab Co-Design Milestone: In-Depth Performance Portability Analysis of Improved Integrated Codes on Advanced Architecture.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoekstra, Robert J.; Hammond, Simon David; Richards, David

2017-09-01

This milestone is a tri-lab deliverable supporting ongoing Co-Design efforts impacting applications in the Integrated Codes (IC) program element Advanced Technology Development and Mitigation (ATDM) program element. In FY14, the trilabs looked at porting proxy application to technologies of interest for ATS procurements. In FY15, a milestone was completed evaluating proxy applications in multiple programming models and in FY16, a milestone was completed focusing on the migration of lessons learned back into production code development. This year, the co-design milestone focuses on extracting the knowledge gained and/or code revisions back into production applications.

USEPA Arsenic Demonstration Program

EPA Science Inventory

The presentation provides background information on the USEPA arsenic removal program. The summary includes information on the history of the program, sites and technology selected, and a summary of the data collected from two completed projects.

THE PRE-TECHNICAL PROJECT, A DEMONSTRATION IN EDUCATION FOR TECHNOLOGY. MEDICAL TECHNOLOGY, 11TH AND 12TH YEAR.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY.

MEDICAL TECHNOLOGY IS ONE OF THREE OFFERINGS OF THE PRETECHNICAL PROJECT DESIGNED TO REMOTIVATE UNDERACHIEVING HIGH SCHOOL STUDENTS WHO, UPON SUCCESSFUL COMPLETION OF THE PROGRAM, MAY BE ADMITTED TO THE CAREER PROGRAMS OF THE COMMUNITY COLLEGE. DEVELOPED BY A COMMITTEE OF TEACHERS AT THE LOCAL LEVEL, THE MANUAL IS INTENDED TO ASSIST TEACHERS,…

The NASA Hyper-X Program

NASA Technical Reports Server (NTRS)

Freeman, Delman C., Jr.; Reubush, Daivd E.; McClinton, Charles R.; Rausch, Vincent L.; Crawford, J. Larry

1997-01-01

This paper provides an overview of NASA's Hyper-X Program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an overview of the flight test program, research objectives, approach, schedule and status. Substantial experimental database and concept validation have been completed. The program is currently concentrating on the first, Mach 7, vehicle development, verification and validation in preparation for wind-tunnel testing in 1998 and flight testing in 1999. Parallel to this effort the Mach 5 and 10 vehicle designs are being finalized. Detailed analytical and experimental evaluation of the Mach 7 vehicle at the flight conditions is nearing completion, and will provide a database for validation of design methods once flight test data are available.

SITE TECHNOLOGY CAPSULE: J.R. SIMPLOT EX-SITU ANAEROBIC BIOREMEDIATION TECHNOLOGY: TNT

EPA Science Inventory

The J.R. Simplot Ex-Situ Bioremediation Technology is designed to degrade nitroaromatic compounds anaerobically, with total destruction of toxic intermediates at the completion of treatment. An evaluation of this technology was conducted under the SITE Program on TNT-contaminated...

Face Recognition Vendor Test 2000: Evaluation Report

DTIC Science & Technology

2001-02-16

The biggest change in the facial recognition community since the completion of the FERET program has been the introduction of facial recognition products...program and significantly lowered system costs. Today there are dozens of facial recognition systems available that have the potential to meet...inquiries from numerous government agencies on the current state of facial recognition technology prompted the DoD Counterdrug Technology Development Program

75 FR 36157 - Establishment of the Temporary Certification Program for Health Information Technology

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-24

...This final rule establishes a temporary certification program for the purposes of testing and certifying health information technology. This final rule is established under the authority granted to the National Coordinator for Health Information Technology (the National Coordinator) by section 3001(c)(5) of the Public Health Service Act (PHSA), as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act. The National Coordinator will utilize the temporary certification program to authorize organizations to test and certify Complete Electronic Health Records (EHRs) and/or EHR Modules, thereby making Certified EHR Technology available prior to the date on which health care providers seeking incentive payments available under the Medicare and Medicaid EHR Incentive Programs may begin demonstrating meaningful use of Certified EHR Technology.

Composite armored vehicle advanced technology demonstator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ostberg, D.T.; Dunfee, R.S.; Thomas, G.E.

1996-12-31

Composite structures are a key technology needed to develop future lightweight combat vehicles that are both deployable and survivable. The Composite Armored Vehicle Advanced Technology Demonstrator Program that started in fiscal year 1994 will continue through 1998 to verily that composite structures are a viable solution for ground combat vehicles. Testing thus far includes material characterization, structural component tests and full scale quarter section tests. Material and manufacturing considerations, tests, results and changes, and the status of the program will be described. The structural component tests have been completed successfully, and quarter section testing is in progress. Upon completion ofmore » the critical design review, the vehicle demonstrator will be Fabricated and undergo government testing.« less

Information Technology Curriculum Development for Participation and Equity Programs.

ERIC Educational Resources Information Center

Post, Maarten; And Others

A study explored ways in which training in information technology could be included in Participation and Equity Programs (PEP) in the areas of hospitality/tourism, retailing, and business and finance. The research team conducted a literature search, obtained completed questionnaires from 10 colleges offering a total of 22 PEPs, visited an…

Academic Mentoring and Dropout Prevention for Students in Math, Science and Technology

ERIC Educational Resources Information Center

Larose, Simon; Cyrenne, Diane; Garceau, Odette; Harvey, Marylou; Guay, Frederic; Godin, Fanny; Tarabulsy, George M; Deschenes, Claire

2011-01-01

In this study, we examined the impact of a new academic mentoring program aimed at preventing student dropout in math, science and technology. The MIRES program entails bimonthly meetings between students entering college and university students completing their undergraduate degree in science and engineering. A randomized pretest-posttest control…

An investigation of air transportation technology at the Massachusetts Institute of Technology, 1992-1993

NASA Technical Reports Server (NTRS)

Simpson, Robert W.

1994-01-01

An investigation of air transportation technology at MIT during 1992 - 1993 is presented. One completed project and two continuing research activities are under the sponsorship of the FAA/NASA Joint University Program. The completed project was on tracking aircraft around a turn with wind effects. Active research projects are on ASLOTS - an interactive adaptive system of automated approach spacing of aircraft and alerting in automated and datalink capable cockpits.

45 CFR 170.304 - Specific certification criteria for Complete EHRs or EHR Modules designed for an ambulatory setting.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.304 Specific certification criteria...

45 CFR 170.306 - Specific certification criteria for Complete EHRs or EHR Modules designed for an inpatient setting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.306 Specific certification criteria...

45 CFR 170.306 - Specific certification criteria for Complete EHRs or EHR Modules designed for an inpatient setting.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.306 Specific certification criteria...

45 CFR 170.304 - Specific certification criteria for Complete EHRs or EHR Modules designed for an ambulatory setting.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.304 Specific certification criteria...

45 CFR 170.306 - Specific certification criteria for Complete EHRs or EHR Modules designed for an inpatient setting.

Code of Federal Regulations, 2011 CFR

2011-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.306 Specific certification criteria...

45 CFR 170.304 - Specific certification criteria for Complete EHRs or EHR Modules designed for an ambulatory setting.

Code of Federal Regulations, 2012 CFR

2012-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.304 Specific certification criteria...

45 CFR 170.304 - Specific certification criteria for Complete EHRs or EHR Modules designed for an ambulatory setting.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.304 Specific certification criteria...

45 CFR 170.304 - Specific certification criteria for Complete EHRs or EHR Modules designed for an ambulatory setting.

Code of Federal Regulations, 2010 CFR

2010-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.304 Specific certification criteria...

45 CFR 170.306 - Specific certification criteria for Complete EHRs or EHR Modules designed for an inpatient setting.

Code of Federal Regulations, 2014 CFR

2014-10-01

... of Health and Human Services HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.306 Specific certification criteria...

45 CFR 170.306 - Specific certification criteria for Complete EHRs or EHR Modules designed for an inpatient setting.

Code of Federal Regulations, 2013 CFR

2013-10-01

... OF HEALTH AND HUMAN SERVICES HEALTH INFORMATION TECHNOLOGY HEALTH INFORMATION TECHNOLOGY STANDARDS, IMPLEMENTATION SPECIFICATIONS, AND CERTIFICATION CRITERIA AND CERTIFICATION PROGRAMS FOR HEALTH INFORMATION TECHNOLOGY Certification Criteria for Health Information Technology § 170.306 Specific certification criteria...

Pathfinder

NASA Image and Video Library

2004-04-15

Pictured in the high bay, is the X-34 Technology Demonstrator in the process of completion. The X-34 wass part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments supported the Agency's goal of dramatically reducing the cost of access to space and defined the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

X-34 Technology Demonstrator in High Bay

NASA Technical Reports Server (NTRS)

2004-01-01

Pictured in the high bay, is the X-34 Technology Demonstrator in the process of completion. The X-34 wass part of NASA's Pathfinder Program which demonstrated advanced space transportation technologies through the use of flight experiments and experimental vehicles. These technology demonstrators and flight experiments supported the Agency's goal of dramatically reducing the cost of access to space and defined the future of space transportation pushing technology into a new era of space development and exploration at the dawn of the new century. The X-34 program was cancelled in 2001.

Distance Education in Dental Hygiene Bachelor of Science Degree Completion Programs: As Perceived by Students and Faculty

ERIC Educational Resources Information Center

Tsokris, Maureen

2010-01-01

This study investigated student and faculty perceptions of their experiences with online learning in dental hygiene Bachelor of Science degree completion programs on the dimensions of: quality of learning, connectedness to the learning environment, technology factors and student satisfaction. The experiences of dental hygiene students who took…

Resiliency in Physics: The Lived Experiences of African-American Women Who Completed Doctoral Physics Programs

ERIC Educational Resources Information Center

Burnette, Samara Fleming

2013-01-01

Currently, little is known about African-American women with doctoral degrees in physics. This study examined the lived experiences of African-American women who completed doctoral programs in physics. Due to factors of race and gender, African-American women automatically enter a double-bind in science, technology, engineering, and mathematics…

Bilingual Academic Computer and Technology Oriented Program. Project COM-TECH, 1987-1988.

ERIC Educational Resources Information Center

Berney, Tomi D.; Plotkin, Donna

The Bilingual Computer and Technology Oriented Program (COM-TECH) completed the final year of a 3-year funding cycle. The project's primary goal was to provide bilingual individualized instruction, using an enrichment approach, to Spanish- and Haitian Creole/French-speaking students of varying levels of native and English second-language (ESL)…

Manufacturing Methods and Technology (MMT) project execution report

NASA Astrophysics Data System (ADS)

Swim, P. A.

1982-10-01

This document is a summary compilation of the manufacturing methods and technology program project status reports (RCS DRCMT-301) submitted to IBEA from DARCOM major Army subcommands and project managers. Each page of the computerized section lists project number, title, status, funding, and projected completion date. Summary pages give information relating to the overall DARCOM program.

Technology Experiences of Student Interns in a One to One Mobile Program

ERIC Educational Resources Information Center

Cullen, Theresa A.; Karademir, Tugra

2018-01-01

This article describes how a group of student intern teachers (n = 51) in a one to one teacher education iPad program were asked to reflect using Experience Sampling Method (ESM) on their use of technology in the classroom during internship. Interns also completed summative reflections and class discussions. Data collected both in online and…

Department of Defense statement on the X-ray Lithography Program to the Research and Development Subcommittee of the House Armed Services Committee of 100th Congress, second session

NASA Astrophysics Data System (ADS)

Maynard, E. D., Jr.

1988-03-01

The Department has a broad and necessarily diverse program in semiconductor science and technology. The three principal goals of that effort are: Reduce the gap between commercial integrated circuit usage and its deployment in military systems, assure a healthy on-shore industrial base to support our defense needs, enhance the producibility of specialized military semiconductor products. The major effort to achieve the first of these objectives is the Very High Speed Integrated Circuits (VHSIC) Program which is nearing completion. The Microwave/millimeter wave Monolithic Integrated Circuit (MIMIC) program has just completed a study program to define the product mix needed to meet military system requirements for radar, electronic warfare, smart weapons and telecommunications. We are bringing together the system requirements of all DoD with the device fabrication and product delivery capabilities of industry in an Infrared Focal Plane Array (IRFPA) program. The goal of the Software Initiative is to enhance our warfighting capability through development of efficient software generation technology and products plus the creation of a technology infusion infrastructure to couple the technology and products to system applications. The X-Ray Lithography Program will begin to establish the industrial base which will be required to sustain U.S. leadership in the semiconductor industry for the late 1990s.

Human Research Program: 2010 Annual Report

NASA Technical Reports Server (NTRS)

2010-01-01

2010 was a year of solid performance for the Human Research Program in spite of major changes in NASA's strategic direction for Human Spaceflight. Last year, the Program completed the final steps in solidifying the management foundation, and in 2010 we achieved exceptional performance from all elements of the research and technology portfolio. We transitioned from creating building blocks to full execution of the management tools for an applied research and technology program. As a team, we continue to deliver the answers and technologies that enable human exploration of space. While the Agency awaits strategic direction for human spaceflight, the Program is well positioned and critically important to helping the Agency achieve its goals.

Teaching Leadership in Technical Programs at Community Colleges

ERIC Educational Resources Information Center

DeBlauw, Amanda L.; Daugherty, Jenny L.

2017-01-01

This descriptive study explored how community colleges are teaching leadership in technical programs. Leadership education curricular offerings were identified via a survey and selected programs reviewed. 68 Deans, Directors, or Chairpersons of a Business, Management, or Technology program completed the survey, representing 61 community colleges.…

Status of shuttle fuel cell technology program.

NASA Technical Reports Server (NTRS)

Rice, W. E.; Bell, D., III

1972-01-01

The hydrogen-oxygen fuel cell has been proved as an efficient and reliable electrical power supply for NASA manned-space-flight vehicles. It has thus ensured a role in the Space Shuttle Program as the primary electrical power supply for the Orbiter vehicle. The advanced fuel cell technology programs conducted under the management of the NASA Manned Spacecraft Center over the past two years have resulted in a high level of technical readiness in fuel cell power generation to support shuttle mission requirements. These programs have taken advantage of technological developments that have occurred since the designs were completed for the Gemini and Apollo fuel cells.

Are They Ready to Teach with Technology? An Investigation of Technology Instruction in Music Teacher Education Programs

ERIC Educational Resources Information Center

Haning, Marshall

2016-01-01

The purpose of this research was to investigate the type, quantity, and effects of technology instruction currently being provided to undergraduate music education majors. Undergraduate participants (n = 46) at 10 degree-granting institutions completed an online survey on the technology instruction received during their undergraduate degree…

Let's get technical: Enhancing program evaluation through the use and integration of internet and mobile technologies.

PubMed

Materia, Frank T; Miller, Elizabeth A; Runion, Megan C; Chesnut, Ryan P; Irvin, Jamie B; Richardson, Cameron B; Perkins, Daniel F

2016-06-01

Program evaluation has become increasingly important, and information on program performance often drives funding decisions. Technology use and integration can help ease the burdens associated with program evaluation by reducing the resources needed (e.g., time, money, staff) and increasing evaluation efficiency. This paper reviews how program evaluators, across disciplines, can apply internet and mobile technologies to key aspects of program evaluation, which consist of participant registration, participant tracking and retention, process evaluation (e.g., fidelity, assignment completion), and outcome evaluation (e.g., behavior change, knowledge gain). In addition, the paper focuses on the ease of use, relative cost, and fit with populations. An examination on how these tools can be integrated to enhance data collection and program evaluation is discussed. Important limitations of and considerations for technology integration, including the level of technical skill, cost needed to integrate various technologies, data management strategies, and ethical considerations, are highlighted. Lastly, a case study of technology use in an evaluation conducted by the Clearinghouse for Military Family Readiness at Penn State is presented and illustrates how technology integration can enhance program evaluation. Copyright © 2016 Elsevier Ltd. All rights reserved.

Hyper-X Program Status

NASA Technical Reports Server (NTRS)

McClinton, Charles R.; Rausch, Vincent L.; Sitz, Joel; Reukauf, Paul

2001-01-01

This paper provides an overview of the objectives and status of the Hyper-X program, which is tailored to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. The first Hyper-X research vehicle (HXRV), designated X-43, is being prepared at the Dryden Flight Research Center for flight at Mach 7. Extensive risk reduction activities for the first flight are completed, and non-recurring design activities for the Mach 10 X-43 (3rd flight) are nearing completion. The Mach 7 flight of the X-43, in the spring of 2001, will be the first flight of an airframe-integrated scramjet-powered vehicle. The Hyper-X program is continuing to plan follow-on activities to focus an orderly continuation of hypersonic technology development through flight research.

Hyper-X Program Status

NASA Technical Reports Server (NTRS)

McClinton, Charles R.; Reubush, David E.; Sitz, Joel; Reukauf, Paul

2001-01-01

This paper provides an overview of the objectives and status of the Hyper-X program, which is tailored to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. The first Hyper-X research vehicle (HXRV), designated X-43, is being prepared at the Dryden Flight Research Center for flight at Mach 7. Extensive risk reduction activities for the first flight are completed, and non-recurring design activities for the Mach 10 X-43 (third flight) are nearing completion. The Mach 7 flight of the X-43, in the spring of 2001, will be the first flight of an airframe-integrated scramjet-powered vehicle. The Hyper-X program is continuing to plan follow-on activities to focus an orderly continuation of hypersonic technology development through flight research.

National Program for e-Learning in Taiwan

ERIC Educational Resources Information Center

Chang, Maiga; Wang, Chin-Yeh; Chen, Gwo-Dong

2009-01-01

Taiwan government has initiated a five-year program since 2002: the National Science and Technology Program for e-Learning. The national program started from 2003 and was completed at the end of year 2007, involving thirteen government agencies. This paper describes the results that the national program has accomplished at its first phase, 2003 to…

42 CFR Appendix D to Part 75 - Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists

Code of Federal Regulations, 2012 CFR

2012-10-01

... technologist credentialed in nuclear medicine technology. 2. Instructional Staff—(a) Responsibilities. The...—Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists A. Sponsorship 1... certificate documenting completion of the program. 2. Educational programs may be established in: (a...

42 CFR Appendix D to Part 75 - Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists

Code of Federal Regulations, 2011 CFR

2011-10-01

... technologist credentialed in nuclear medicine technology. 2. Instructional Staff—(a) Responsibilities. The...—Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists A. Sponsorship 1... certificate documenting completion of the program. 2. Educational programs may be established in: (a...

42 CFR Appendix D to Part 75 - Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists

Code of Federal Regulations, 2013 CFR

2013-10-01

... technologist credentialed in nuclear medicine technology. 2. Instructional Staff—(a) Responsibilities. The...—Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists A. Sponsorship 1... certificate documenting completion of the program. 2. Educational programs may be established in: (a...

42 CFR Appendix D to Part 75 - Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists

Code of Federal Regulations, 2014 CFR

2014-10-01

... technologist credentialed in nuclear medicine technology. 2. Instructional Staff—(a) Responsibilities. The...—Standards for Accreditation of Educational Programs for Nuclear Medicine Technologists A. Sponsorship 1... certificate documenting completion of the program. 2. Educational programs may be established in: (a...

Industrial Arts--Woods and Wood Technology: A Curriculum Guide for Intermediate and Secondary Level Programs.

ERIC Educational Resources Information Center

Missouri Council for Industrial Arts Education.

The curriculum outline is designed to aid the instructor in developing a more complete course of study in woods and wood technology for intermediate and secondary school students. The guide is introduced by a discussion of objectives fundamental to a sound program of industrial arts education, followed by an outline and objectives for the content…

Using Interactive Web-Based Screening, Brief Intervention and Referral to Treatment in an Urban, Safety-Net HIV Clinic.

PubMed

Dawson Rose, Carol; Cuca, Yvette P; Kamitani, Emiko; Eng, Shannon; Zepf, Roland; Draughon, Jessica; Lum, Paula

2015-06-01

Substance use among people living with HIV is high, and screening, brief intervention, and referral to treatment (SBIRT) is an evidence-based approach to addressing the issue. We examined whether patients would participate in a technology-based SBIRT program in an urban HIV clinic. An SBIRT intervention was programmed into the clinic's web-based patient portal linked to their personal health record. We examined: demographic, health, HIV, and substance use characteristics of participants who completed the web-based intervention compared to those who did not. Fewer than half of the 96 participants assigned to the web-based SBIRT completed it (n = 39; 41 %). Participants who completed the web-based intervention had significantly higher amphetamine SSIS scores than those who did not complete the intervention. Participants whose substance use is more harmful may be more motivated to seek help from a variety of sources. In addition, it is important that technology-based approaches to behavioral interventions in clinics take into consideration feasibility, client knowledge, and comfort using technology.

Advanced stimulation technology deployment program: Sonat Exploration Company, Haynesville Formation, North Shongaloo, Red Rock Field, Columbia County, Arkansas and Webster Parish, Louisiana. Topical report, August 1995-January 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

Skees, J.L.; Middlebrook, M.L.; Anthony, W.L.

1997-01-01

The objective of this program is to transfer the core GRI advanced stimulation technologies to Sonat Exploration Company for their continued use upon completion of the program. The methodology to accomplish the objective included seminars and training schools, offset well baseline analysis, fracture treatment design optimization, real-time and post-fracture treatment evaluation and documentation of economic benefits.

Using Interactive Web-Based Screening, Brief Intervention and Referral to Treatment in an Urban, Safety-Net HIV Clinic

PubMed Central

Rose, Carol Dawson; Cuca, Yvette P.; Kamitani, Emiko; Eng, Shannon; Zepf, Roland; Draughon, Jessica; Lum, Paula

2015-01-01

Substance use among PLHIV is high, and screening, brief intervention, and referral to treatment (SBIRT) is an evidence-based approach to addressing the issue. We examined the acceptability of a technology-based SBIRT program in an urban HIV clinic. An SBIRT intervention was programmed into the clinic’s electronic personal health record. We examined: demographic, health, HIV, and substance use characteristics of participants who completed the web-based intervention compared to those who did not. Fewer than half of the 96 participants assigned to the web-based SBIRT completed it (n=39; 41%). Severity of tobacco and amphetamine use differed significantly between participants who did and did not complete the intervention (p=.03, .04 respectively). Participants with higher severity of tobacco and amphetamines were significantly more likely to utilize the web-based SBIRT. It is important for technology-based approaches to behavioral interventions in clinic take into consideration feasibility, client knowledge, and comfort using technology. PMID:25963770

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Report

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

JPRS Report, Science & Technology, USSR: Science & Technology Policy..

DTIC Science & Technology

1987-11-13

is necessary to have for comparison a gauge —"how much he should have done." How to surmount these difficulties is a theme for a separate study. Here...undergo in the shop complete machining, including the milling of complex surfaces, the boring of sockets, grooving, the drilling of holes, including deep...particularly machine building products. Thus, the sectorial ministries are implementing programs of the complete standardization and metrological

Advanced Technology Composite Fuselage: Program Overview

NASA Technical Reports Server (NTRS)

Ilcewicz, L. B.; Smith, P. J.; Hanson, C. T.; Walker, T. H.; Metschan, S. L.; Mabson, G. E.; Wilden, K. S.; Flynn, B. W.; Scholz, D. B.; Polland, D. R.;

23 CFR 650.309 - Qualifications of personnel.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Safety Inspector under the National Society of Professional Engineer's program for National Certification in Engineering Technologies (NICET) and have successfully completed an FHWA approved comprehensive... Accreditation Board for Engineering and Technology; (ii) Successfully passed the National Council of Examiners...

23 CFR 650.309 - Qualifications of personnel.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Safety Inspector under the National Society of Professional Engineer's program for National Certification in Engineering Technologies (NICET) and have successfully completed an FHWA approved comprehensive... Accreditation Board for Engineering and Technology; (ii) Successfully passed the National Council of Examiners...

A Home-Based Exercise Program Driven by Tablet Application and Mobility Monitoring for Frail Older Adults: Feasibility and Practical Implications.

PubMed

Geraedts, Hilde A E; Zijlstra, Wiebren; Zhang, Wei; Spoorenberg, Sophie L W; Báez, Marcos; Far, Iman Khaghani; Baldus, Heribert; Stevens, Martin

2017-02-02

Stimulation of a physically active lifestyle among older adults is essential to health and well-being. The objective of this study was to evaluate the feasibility and user opinion of a home-based exercise program supported by a sensor and tablet application for frail older adults. Community-dwelling older adults (aged ≥70 y) living in The Netherlands were recruited in 2014. Participants exercised 3 months with and 3 months without supervision from a remote coach. Feasibility was operationalized as adherence to exercise (percentage of 5 exercise bouts per week completed) and to wearing the sensor (with 70% defined as sufficient adherence) and the number of problems reported. User opinion was measured with a questionnaire addressing ease of use of the technology and opinion on the program. Twenty-one of 40 enrolled participants completed the trial. Adherence overall was 60.9% (average of 3 bouts per week). Adherence among completers (69.2%) was significantly higher than adherence among dropouts (49.9%). Adherence was sufficient among completers during the 3 months of supervision (75.8%). Adherence to wearing the sensor was 66.7% and was significantly higher among completers than among dropouts (75.7% vs 54.2%). The rate of incidents was significantly lower among completers than among dropouts (0.4 vs 1.2 incidents per participant per week). Connectivity-related incidents were prominent. On a scale of 1 to 5, completers gave ratings of 4.3 (after 3 months) and 4.2 (after 6 months). A home-based exercise program using novel technology seems feasible when participants are given a stable internet connection. This program shows promise for stimulating physical activity among older frail adults, especially if it offers regular coaching.

LESSONS-LEARNED AND SUCCESS STORIES FROM EPA'S REAL-TIME ENVIRONMENTAL MONITORING, DATA DELIVERY, AND PUBLIC OUTREACH PROGRAM

EPA Science Inventory

TTSD has completed a series of technology transfer and risk communication handbooks, case studies, and summary reports for community-based environmental monitoring projects under EPA's Real-Time Environmental Monitoring, Data Delivery, and Public Outreach Program. The Program tak...

X-43 Hypersonic Vehicle Technology Development

NASA Technical Reports Server (NTRS)

Voland, Randall T.; Huebner, Lawrence D.; McClinton, Charles R.

2005-01-01

NASA recently completed two major programs in Hypersonics: Hyper-X, with the record-breaking flights of the X-43A, and the Next Generation Launch Technology (NGLT) Program. The X-43A flights, the culmination of the Hyper-X Program, were the first-ever examples of a scramjet engine propelling a hypersonic vehicle and provided unique, convincing, detailed flight data required to validate the design tools needed for design and development of future operational hypersonic airbreathing vehicles. Concurrent with Hyper-X, NASA's NGLT Program focused on technologies needed for future revolutionary launch vehicles. The NGLT was "competed" by NASA in response to the President s redirection of the agency to space exploration, after making significant progress towards maturing technologies required to enable airbreathing hypersonic launch vehicles. NGLT quantified the benefits, identified technology needs, developed airframe and propulsion technology, chartered a broad University base, and developed detailed plans to mature and validate hypersonic airbreathing technology for space access. NASA is currently in the process of defining plans for a new Hypersonic Technology Program. Details of that plan are not currently available. This paper highlights results from the successful Mach 7 and 10 flights of the X-43A, and the current state of hypersonic technology.

Advanced Durability and Damage Tolerance Design and Analysis Methods for Composite Structures: Lessons Learned from NASA Technology Development Programs

NASA Technical Reports Server (NTRS)

Harris, Charles E.; Starnes, James H., Jr.; Shuart, Mark J.

2003-01-01

Aerospace vehicles are designed to be durable and damage tolerant. Durability is largely an economic life-cycle design consideration whereas damage tolerance directly addresses the structural airworthiness (safety) of the vehicle. However, both durability and damage tolerance design methodologies must address the deleterious effects of changes in material properties and the initiation and growth of microstructural damage that may occur during the service lifetime of the vehicle. Durability and damage tolerance design and certification requirements are addressed for commercial transport aircraft and NASA manned spacecraft systems. The state-of-the-art in advanced design and analysis methods is illustrated by discussing the results of several recently completed NASA technology development programs. These programs include the NASA Advanced Subsonic Technology Program demonstrating technologies for large transport aircraft and the X-33 hypersonic test vehicle demonstrating technologies for a single-stage-to-orbit space launch vehicle.

Comparison of the effects of mobile technology AAC apps on programming visual scene displays.

PubMed

Caron, Jessica; Light, Janice; Davidoff, Beth E; Drager, Kathryn D R

2017-12-01

Parents and professionals who work with individuals who use augmentative and alternative communication (AAC) face tremendous time pressures, especially when programming vocabulary in AAC technologies. System design (from programming functions to layout options) necessitates a range of skills related to operational competence and can impose intensive training demands for communication partners. In fact, some AAC applications impose considerable learning demands, which can lead to increased time to complete the same programming tasks. A within-subject design was used to investigate the comparative effects of three visual scene display AAC apps (GoTalk Now, AutisMate, EasyVSD) on the programming times for three off-line programming activities, by adults who were novices to programming AAC apps. The results indicated all participants were able to create scenes and add hotspots during off-line programming tasks with minimal self-guided training. The AAC app that had the least number of programming steps, EasyVSD, resulted in the fastest completion times across the three programming tasks. These results suggest that by simplifying the operational requirements of AAC apps the programming time is reduced, which may allow partners to better support individuals who use AAC.

Large rotorcraft transmission technology development program

NASA Technical Reports Server (NTRS)

Mack, J. C.

1983-01-01

Testing of a U.S. Army XCH-62 HLH aft rotor transmission under NASA Contract NAS 3-22143 was successfully completed. This test establishes the feasibility of large, high power rotorcraft transmissions as well as demonstrating the resolution of deficiencies identified during the HLH advanced technology programs and reported by USAAMRDLTR-77-38. Over 100 hours of testing was conducted. At the 100% design power rating of 10,620 horsepower, the power transferred through a single spiral bevel gear mesh is more than twice that of current helicopter bevel gearing. In the original design of these gears, industry-wide design methods were employed and failures were experienced which identified problem areas unique to gear size. To remedy this technology shortfall, a program was developed to predict gear stresses using finite element analysis for complete and accurate representation of the gear tooth and supporting structure. To validate the finite element methodology gear strain data from the existing U.S. Army HLH aft transmission was acquired, and existing data from smaller gears were made available.

75 FR 62686 - Health Information Technology: Revisions to Initial Set of Standards, Implementation...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... program whereby the National Coordinator would authorize organizations to test and certify Complete EHRs... Certification Bodies (ONC-ATCBs)) to test and certify Complete EHRs and/or EHR Modules to the certification... Coordinator to test and certify Complete EHRs and/or EHR Modules, it will be subject, depending on the scope...

42 CFR 486.104 - Condition for coverage: Qualifications, orientation and health of technical personnel.

Code of Federal Regulations, 2010 CFR

2010-10-01

...), or (4) of this section: (1) Successful completion of a program of formal training in X-ray technology in a school approved by the Joint Review Committee on Education in Radiologic Technology (JRCERT), or have earned a bachelor's or associate degree in radiologic technology from an accredited college or...

Changes in Teachers' Attitudes toward Instructional Technology Attributed to Completing the ISTE NETS*T Certificate of Proficiency Capstone Program

ERIC Educational Resources Information Center

Overbaugh, Richard C.; Lu, Ruiling; Diacopoulos, Mark

2015-01-01

An evaluation was conducted of teachers' attitudinal perceptions of their confidence for implementation, stages of innovation adoption, and satisfaction, as a result of participating in the International Society for Technology in Education's National Educational Technology Standards-Teachers (ISTE NETS*T) Certificate of Proficiency Capstone…

Horizons. A Guide to Postsecondary Education in Ontario, 1988/89.

ERIC Educational Resources Information Center

Ontario Ministry of Colleges and Universities, Toronto.

A guide to postsecondary opportunities in Ontario (Canada) is presented to help students choose a course of study after completing secondary school. Information is presented on student costs and student financial aid and the Colleges of Applied Arts and Technology. Apprenticeship programs, diploma programs, and certificate programs are identified…

Ferment in Business Education: E-Commerce Master's Programs.

ERIC Educational Resources Information Center

Durlabhji, Subhash; Fusilier, Marcelline R.

2002-01-01

A review of curriculum and course descriptions of 67 Web-based electronic commerce master's programs showed that the number of programs grew 76% over 8 months. More nontechnical than technology-centered courses are offered. Business schools are apparently viewing e-commerce as a completely new discipline. (Contains 26 references.) (SK)

Portfolio as a Teaching Method: A Capstone Project to Promote Recognition of Professional Growth

ERIC Educational Resources Information Center

Wolffe, Robert; Crowe, Helja Antola; Evens, Wayne; McConnaughay, Kelly

2013-01-01

A reflective portfolio as a capstone assignment was selected to accomplish recognition by teachers completing a science, technology, mathematics, engineering master's program for elementary teachers about their professional and personal changes and to provide program evaluators additional qualitative data regarding attainment of program goals. As…

Educators Exchange Program, 1996. Evaluation Report.

ERIC Educational Resources Information Center

Armstrong, William B.; Turingan, Maria R.; Bersentes, Gina H.

Following an initial effort in 1994, the Educators Exchange Program 1996 (EEP-96) was the second project completed under a training and educational exchange agreement reached between California's San Diego Community College District (SDCCD) and the republic of Mexico. In EEP-96, the district provided a five-week technological training program to…

Evaluating the Effectiveness of the 2003-2004 NASA CONNECT(trademark)Program

NASA Technical Reports Server (NTRS)

Caton, Randall H.; Pinelli, Thomas E.; Giersch, Christopher E.; Holmes, Ellen B.; Lambert, Matthew A.

2005-01-01

NASA CONNECT is an Emmy-award-winning series of instructional (distance learning) programs for grades 6-8. Produced by the NASA Center for Distance Learning, the nine programs in the 2003-2004 NASA CONNECT series are research-, inquiry-, standards-, teacher-, and technology-based and include a 30-minute program, an educator guide containing a hands-on activity, and a web-based component. The 1,500 randomly selected NASA CONNECT registered users were invited to complete an electronic (self-reported) survey that employed a 5-point Likert-type scale. Regarding NASA CONNECT, respondents reported that the programs (1) enhance the teaching of mathematics, science, and technology (4.53); (2) are aligned with the national mathematics, science, and technology standards (4.52); (3) raise student awareness of careers requiring mathematics, science, and technology (4.48); (4) demonstrate the application of mathematics, science, and technology (4.47); and (5) present women and minorities performing challenging engineering and science tasks (4.50).

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Technical Appendices

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Determining the Skills Gap: A Study of the Perceptions of Entry-Level Skills of Recent Career and Technology Education Completers

ERIC Educational Resources Information Center

Green, Lee C.

2015-01-01

This study examined the perceptions of community employers as to the skill levels of graduates from Career and Technology Education (CTE) programs. This study also examined the perceptions of former students of CTE programs. The skill level is the skills that the job market deem necessary to be successful in a particular industry. This study also…

Bringing Together Mentoring, Technology, and Whole-School Reform: A First Look at the iMentor College Ready Program. Executive Summary

ERIC Educational Resources Information Center

Merrill, Lisa; Siman, Nina; Wulach, Suzanne; Kang, David

2015-01-01

iMentor's College Ready Program is a unique approach that combines elements of school-based mentoring, whole school reform, and technology in an effort to help students develop the full suite of knowledge, behaviors, and skills they need to complete high school and enroll and thrive in college. iMentor partners with high schools that serve…

Technology transfer of military space microprocessor developments

NASA Astrophysics Data System (ADS)

Gorden, C.; King, D.; Byington, L.; Lanza, D.

1999-01-01

Over the past 13 years the Air Force Research Laboratory (AFRL) has led the development of microprocessors and computers for USAF space and strategic missile applications. As a result of these Air Force development programs, advanced computer technology is available for use by civil and commercial space customers as well. The Generic VHSIC Spaceborne Computer (GVSC) program began in 1985 at AFRL to fulfill a deficiency in the availability of space-qualified data and control processors. GVSC developed a radiation hardened multi-chip version of the 16-bit, Mil-Std 1750A microprocessor. The follow-on to GVSC, the Advanced Spaceborne Computer Module (ASCM) program, was initiated by AFRL to establish two industrial sources for complete, radiation-hardened 16-bit and 32-bit computers and microelectronic components. Development of the Control Processor Module (CPM), the first of two ASCM contract phases, concluded in 1994 with the availability of two sources for space-qualified, 16-bit Mil-Std-1750A computers, cards, multi-chip modules, and integrated circuits. The second phase of the program, the Advanced Technology Insertion Module (ATIM), was completed in December 1997. ATIM developed two single board computers based on 32-bit reduced instruction set computer (RISC) processors. GVSC, CPM, and ATIM technologies are flying or baselined into the majority of today's DoD, NASA, and commercial satellite systems.

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview

NASA Technical Reports Server (NTRS)

Hughes, Stephen J.; Cheatwood, F. McNeil; Calomino, Anthony M.; Wright, Henry S.; Wusk, Mary E.; Hughes, Monica F.

2013-01-01

The successful flight of the Inflatable Reentry Vehicle Experiment (IRVE)-3 has further demonstrated the potential value of Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology. This technology development effort is funded by NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). This paper provides an overview of a multi-year HIAD technology development effort, detailing the projects completed to date and the additional testing planned for the future.

INNOVATIVE FOSSIL FUEL FIRED VITRIFICATION TECHNOLOGY FOR SOIL REMEDIATION

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. Hnat; L.M. Bartone; M. Pineda

2001-07-13

This Summary Report summarizes the progress of Phases 3, 3A and 4 of a waste technology Demonstration Project sponsored under a DOE Environmental Management Research and Development Program and administered by the U.S. Department of Energy National Energy Technology Laboratory-Morgantown (DOE-NETL) for an ''Innovative Fossil Fuel Fired Vitrification Technology for Soil Remediation''. The Summary Reports for Phases 1 and 2 of the Program were previously submitted to DOE. The total scope of Phase 3 was to have included the design, construction and demonstration of Vortec's integrated waste pretreatment and vitrification process for the treatment of low level waste (LLW), TSCA/LLWmore » and mixed low-level waste (MLLW). Due to funding limitations and delays in the project resulting from a law suit filed by an environmental activist and the extended time for DOE to complete an Environmental Assessment for the project, the scope of the project was reduced to completing the design, construction and testing of the front end of the process which consists of the Material Handling and Waste Conditioning (MH/C) Subsystem of the vitrification plant. Activities completed under Phases 3A and 4 addressed completion of the engineering, design and documentation of the Material Handling and Conditioning System such that final procurement of the remaining process assemblies can be completed and construction of a Limited Demonstration Project be initiated in the event DOE elects to proceed with the construction and demonstration testing of the MH/C Subsystem.« less

Engineering development program of a closed aluminum-oxygen semi-cell system for an unmanned underwater vehicle: An update

NASA Astrophysics Data System (ADS)

Gregg, Dane W.; Hall, Susan E.

1995-04-01

Most emerging unmanned undersea vehicle (UUV) missions require significantly longer range and endurance than is achievable with existing battery technology. The Aluminum-Oxygen (Al-O2) semi-cell is a candidate technology capable of providing a significant improvement in endurance compared to the silver-zinc battery technology currently used in UUVs and compares favorably to other proposed UUV power systems not only in performance, but also in safety and logistics. An Al-O2 semi-cell system is under development by Loral Defense Systems-Akron (Loral) for the ARPA/Navy 44 in. diameter UUV test vehicle. The power plant consists of a cell stack, gas management, oxygen storage, electrolyte management, coolant and controller subsystems, designed to replace the existing silver-zinc battery and meet existing weight, volume, electrical and thermal requirements, therefore minimizing modifications to the UUV. A detailed system design is complete. A component and material endurance test to evaluate compatibility and reliability of various material arid components is complete. Sub scale (Short stack) system testing is completed. A full-scale demonstration unit is now under construction in the second half of 1995. The full scale demonstration test will simulate environmental conditions of the operational system. This paper summarizes the results of the extensive short stack and endurance test programs, describes the plan for full-scale testing, and concludes with a brief discussions of future directions for this technology. This program is sponsored by ARPA Maritime Systems Technology Office under NASA contract NAS3-26715.

Studying the Impact of Technology-Infused Activities among Low-Income Spanish-Speaking Immigrant Families

ERIC Educational Resources Information Center

Rivera, Héctor H.

2014-01-01

This study examines the impact of an intervention technology program--Community Learning Centers--designed to assist low-income Spanish-speaking parents in learning and using technology for family advancement. The study is based on a sample of 408 participants who completed pre- and post-surveys. Data collection was conducted across 2 years in…

StarTEC: A Technology Project in Education Reform.

ERIC Educational Resources Information Center

Hawley, Helen; Benavides, Otto; Duffy, Sharon; Georgi, David; Guay, Diane; Redmond, Pamela; Richmond, James

StarTEC (Staff, Teacher, and Restructured Technology Education Consortium) was a 3-year technology catalyst program funded by the U.S. Department of Education, and continued for a third year to complete its activities. The goal of StarTEC was to ensure that all teachers prepared by partners in the Consortium would meet the new California standard…

Automotive Stirling engine development program: A success

NASA Technical Reports Server (NTRS)

Tabata, W. K.

1987-01-01

The original 5-yr Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

A Logic Programming Testbed for Inductive Thought and Specification.

ERIC Educational Resources Information Center

Neff, Norman D.

This paper describes applications of logic programming technology to the teaching of the inductive method in computer science and mathematics. It discusses the nature of inductive thought and its place in those fields of inquiry, arguing that a complete logic programming system for supporting inductive inference is not only feasible but necessary.…

Automotive Stirling engine development program - A success

NASA Technical Reports Server (NTRS)

Tabata, William K.

1987-01-01

The original 5-year Automotive Stirling Engine Development Program has been extended to 10 years due to reduced annual funding levels. With an estimated completion date of April 1988, the technical achievements and the prospectives of meeting the original program objectives are reviewed. Various other applications of this developed Stirling engine technology are also discussed.

Programs | Office of Cancer Genomics

Cancer.gov

OCG facilitates cancer genomics research through a series of highly-focused programs. These programs generate and disseminate genomic data for use by the cancer research community. OCG programs also promote advances in technology-based infrastructure and create valuable experimental reagents and tools. OCG programs encourage collaboration by interconnecting with other genomics and cancer projects in order to accelerate translation of findings into the clinic. Below are OCG’s current, completed, and initiated programs:

NASA Systems Autonomy Demonstration Program - A step toward Space Station automation

NASA Technical Reports Server (NTRS)

Starks, S. A.; Rundus, D.; Erickson, W. K.; Healey, K. J.

1987-01-01

This paper addresses a multiyear NASA program, the Systems Autonomy Demonstration Program (SADP), whose main objectives include the development, integration, and demonstration of automation technology in Space Station flight and ground support systems. The role of automation in the Space Station is reviewed, and the main players in SADP and their roles are described. The core research and technology being promoted by SADP are discussed, and a planned 1988 milestone demonstration of the automated monitoring, operation, and control of a complete mission operations subsystem is addressed.

All About the E-Rate.

ERIC Educational Resources Information Center

Ravenaugh, Mickey

1999-01-01

The Universal Service Fund for Schools and Libraries, or "E-Rate," is a cooperative business/government program allowing needy public schools and libraries a 20 to 90% discount on new telecommunications technologies. Schools must have technology plans, complete various forms, and contact participating vendors to determine appropriate…

Mine Burial Assessment State-of the Art in Prediction and Modeling Workshop and Initiation of Technical Program

DTIC Science & Technology

2000-09-30

Burial Assessment State-of-the Art Science , Technology, and Modeling. A Review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water...the ONR Mine Burial Prediction Program are summarized below. 1) Completed comprehensive technical reports: a. Mine Burial Assessment, State-of-the Art ... Science , Technology, and Modeling. A review of Coastal Research, Modeling, and Naval Operational Needs in Shallow Water Environments with

Participants in New Beginnings and Career Equity Programs Gain Knowledge and Equitable Attitudes. Evaluation Report, Program Year 1997.

ERIC Educational Resources Information Center

Montclair State Univ., Upper Montclair, NJ. Career Equity Assistance Center for Research and Evaluation.

Occupational and sex equity programs administered by the New Jersey Department of Education, Office of Bilingual Education and Equity Issues, and funded through the Carl D. Perkins Vocational and Applied Technology Education Act were evaluated. Participants in single-parent and sex equity programs completed a series of pretests and posttests that…

A Proposal to the Massachusetts Board of Regional Community Colleges for a New Occupational Program.

ERIC Educational Resources Information Center

Viaux, Frederic B.

The development of a Mental Health Technology Program at Middlesex Community College is proposed. The 2-year program would train the student to become a middle-level generalist in the field of mental health with special abilities as a communicator. On successfully completing the program, the student would receive an Associate Degree in Mental…

NASA's X2000 Program: An Institutional Approach to Enabling Smaller Spacecraft

NASA Technical Reports Server (NTRS)

Deutsch, Leslie J.; Salvo, Chris; Woerner, David

2000-01-01

The number of NASA science missions per year is increasing from less than one to more than six. At the same time, individual mission budgets are smaller and cannot afford their own dedicated technology developments. In response to this, NASA has formed the X2000 Program. This program, which is divided into a set of subsequent "deliveries" will provide the basic avionics, power, communications, and software capability for future science missions. X2000 First Delivery, which will be completed in early 2001, will provide a full-functioned one MRAD tolerant flight computer, power switching electronics, a highly efficient radioisotope power source, and a transponder that provides high-level services at both 8.4 GHz and 32 GHz bands. The X2000 Second Delivery, which will be completed in the 2003 time frame, will enable complete spacecraft in the 10-50 kg class. All capabilities delivered by the X2000 program will be commercialized within the US and therefore will be available for others to use. Although the immediate customers for these technologies are deep space missions, most of the capabilities being delivered are generic in nature and will be equally applicable to Earth Observation missions.

In-Space Propulsion Technology Products Ready for Infusion on NASA's Future Science Missions

NASA Technical Reports Server (NTRS)

Anderson, David J.; Pencil, Eric; Peterson, Todd; Dankanich, John; Munk, Michele M.

2012-01-01

Since 2001, the In-Space Propulsion Technology (ISPT) program has been developing and delivering in-space propulsion technologies that will enable or enhance NASA robotic science missions. These in-space propulsion technologies are applicable, and potentially enabling, for future NASA flagship and sample return missions currently being considered. They have a broad applicability to future competed mission solicitations. The high-temperature Advanced Material Bipropellant Rocket (AMBR) engine, providing higher performance for lower cost, was completed in 2009. Two other ISPT technologies are nearing completion of their technology development phase: 1) NASA s Evolutionary Xenon Thruster (NEXT) ion propulsion system, a 0.6-7 kW throttle-able gridded ion system; and 2) Aerocapture technology development with investments in a family of thermal protection system (TPS) materials and structures; guidance, navigation, and control (GN&C) models of blunt-body rigid aeroshells; aerothermal effect models; and atmospheric models for Earth, Titan, Mars and Venus. This paper provides status of the technology development, applicability, and availability of in-space propulsion technologies that have recently completed their technology development and will be ready for infusion into NASA s Discovery, New Frontiers, SMD Flagship, or technology demonstration missions.

Doctoral Research in Library Media; Completed and Underway 1970.

ERIC Educational Resources Information Center

Anderton, Ray L., Ed.; Mapes, Joseph L., Ed.

Doctoral theses completed and doctoral theses underway in the subject area of instructional technology are listed in this bibliography under the subtitles of audio literacy, audiovisual techniques, computers in education, library media, media training, programed instruction, projected materials, simulation and games, systems approach, television,…

KSC All Hands

NASA Image and Video Library

2018-01-11

Josie Burnett, director or Exploration Research and Technology Programs, speaks to Kennedy Space Center employees about plans for the coming year. The event took place in the Lunar Theater at the Kennedy Space Center Visitor Complex’s Apollo Saturn V Center. The year will be highlighted with NASA's partners preparing test flights for crewed missions to the International Space Station as part of the agency's Commercial Crew Program and six launches by the Launch Services Program. Exploration Ground Systems will be completing facilities to support the Space Launch System rocket and Orion spacecraft. Exploration Research and Technology Programs will continue to provide supplies to the space station launched as part of the Commercial Resupply Services effort.

Blindness and Computer Networking at iTEC [Information Technology Education Center].

ERIC Educational Resources Information Center

Goins, Shannon

A new program to train blind and visually impaired individuals to design and run a computer network has been developed. The program offers the Microsoft Certified Systems Engineer (MCSE) training. The program, which began in February 2001, recently graduated its first class of students, who are currently completing 1-month internships to complete…

Dyna Soars: Low Torque Measurement Dynamometer

ERIC Educational Resources Information Center

Dolph, Darrel A.

2004-01-01

Students in the Electronics Engineering Technology program at Pennsylvania College of Technology designed and built a computerized dynamometer platform for testing dc brushless motors. As the capstone experience for EET-320, Measurement and Tests course, students were divided into teams of four and were given three weeks to complete the project.…

A Compendium of Energy Conservation Success Stories

DOE R&D Accomplishments Database

1988-09-01

Three-quarters of DOE's Conservation R and D funds have been devoted to technology research and development: basic and applied research, exploratory R and D, engineering feasibility studies, pilot-scale prototype R and D, and technology demonstration. Non R and D projects have involved technology assessment program planning and analysis, model development, technology transfer and consumer information, health effects and safety research, and technical support for rule making. The success stories summarized in this compendium fall into three general categories: Completed Technology Success Stories, projects that have resulted in new energy-saving technologies that are presently being used in the private sector; Technical Success Stories, projects that have produced or disseminated important scientific/technical information likely to result in future energy savings; Program Success Stories, non-R and D activities that have resulted in nationally significant energy benefits. The Energy Conservation research and development program at DOE is managed by the Office of Conservation under the direction of the Deputy Assistant Secretary for Conservation. Three subordinate Program Offices correspond to the buildings, transportation, and industrial end-use sectors. A fourth subordinate Program Office{endash}Energy Utilization Research{endash}sponsors research and technical inventions for all end-use sectors.

Technical Objective Document for Food and Food Service Systems

DTIC Science & Technology

1990-10-01

full ntission posture for exlended duration . 3. POCGRESS AND ACCa -fPLISHMENI’S Natick is responsible for many Research, Development, Test , and...Dr. David L. Kaplan Telephone (508) 651-5525 (Biotechnology) b. Technology Program (1) FY91 Planned Programs Complete Joint Services Front End

Final Technical Report for GO17004 Regulatory Logic: Codes and Standards for the Hydrogen Economy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nakarado, Gary L.

The objectives of this project are to: develop a robust supporting research and development program to provide critical hydrogen behavior data and a detailed understanding of hydrogen combustion and safety across a range of scenarios, needed to establish setback distances in building codes and minimize the overall data gaps in code development; support and facilitate the completion of technical specifications by the International Organization for Standardization (ISO) for gaseous hydrogen refueling (TS 20012) and standards for on-board liquid (ISO 13985) and gaseous or gaseous blend (ISO 15869) hydrogen storage by 2007; support and facilitate the effort, led by the NFPA,more » to complete the draft Hydrogen Technologies Code (NFPA 2) by 2008; with experimental data and input from Technology Validation Program element activities, support and facilitate the completion of standards for bulk hydrogen storage (e.g., NFPA 55) by 2008; facilitate the adoption of the most recently available model codes (e.g., from the International Code Council [ICC]) in key regions; complete preliminary research and development on hydrogen release scenarios to support the establishment of setback distances in building codes and provide a sound basis for model code development and adoption; support and facilitate the development of Global Technical Regulations (GTRs) by 2010 for hydrogen vehicle systems under the United Nations Economic Commission for Europe, World Forum for Harmonization of Vehicle Regulations and Working Party on Pollution and Energy Program (ECE-WP29/GRPE); and to Support and facilitate the completion by 2012 of necessary codes and standards needed for the early commercialization and market entry of hydrogen energy technologies.« less

X-33/RLV Program Aerospike Engines

NASA Technical Reports Server (NTRS)

1999-01-01

Substantial progress was made during the past year in support of the X-33/RLV program. X-33 activity was directed towards completing the remaining design work and building hardware to support test activities. RLV work focused on the nozzle ramp and powerpack technology tasks and on supporting vehicle configuration studies. On X-33, the design activity was completed to the detail level and the remainder of the drawings were released. Component fabrication and engine assembly activity was initiated, and the first two powerpacks and the GSE and STE needed to support powerpack testing were completed. Components fabrication is on track to support the first engine assembly schedule. Testing activity included powerpack testing and component development tests consisting of thrust cell single cell testing, CWI system spider testing, and EMA valve flow and vibration testing. Work performed for RLV was divided between engine system and technology development tasks. Engine system activity focused on developing the engine system configuration and supporting vehicle configuration studies. Also, engine requirements were developed, and engine performance analyses were conducted. In addition, processes were developed for implementing reliability, mass properties, and cost controls during design. Technology development efforts were divided between powerpack and nozzle ramp technology tasks. Powerpack technology activities were directed towards the development of a prototype powerpack and a ceramic turbine technology demonstrator (CTTD) test article which will allow testing of ceramic turbines and a close-coupled gas generator design. Nozzle technology efforts were focused on the selection of a composite nozzle supplier and on the fabrication and test of composite nozzle coupons.

Space Transportation Systems, Aeronautics and Space Technology, Space and Terrestrial Applications, and Space Sciences

NASA Technical Reports Server (NTRS)

1980-01-01

This report is prepared on an annual basis for the purposes of highlighting the fiscal year research and technology (R&T) activities. Its intent is to better inform the R&T Program Managers of significant accomplishments that promise practical and beneficial program application. The report is not inclusive of all R&T activities. The document is organized into two distinct sections: (1) a general summary of the major R&T activities in each program area, and (2) a description of significant individual completed activities and their results. This document will be updated November 1 of each year.

Pratt & Whitney/Boeing Engine Validation of Noise Reduction Concepts Final Report for NASA Contract NAS3-97144, Phase 2

NASA Technical Reports Server (NTRS)

Bock, Larry A.; Hauser, Joseph E.; Mathews, Douglas C.; Topol, David A.; Bielak, Gerald W.; Lan, Justin H.; Premo, John W.

2014-01-01

This report presents results of the work completed in Phase 2 of the Engine Validation of Noise Reduction Concepts (EVNRC) contract. The purpose of the program is to validate, through engine testing, advanced noise reduction concepts aimed at reducing engine noise up to 6 EPNdB and improving nacelle suppression by 50 percent relative to 1992 technology. Phase 1 of the program is completed and is summarized in NASA/CR-2014-218088.

Space station propulsion technology

NASA Technical Reports Server (NTRS)

Briley, G. L.

1986-01-01

The progress on the Space Station Propulsion Technology Program is described. The objectives are to provide a demonstration of hydrogen/oxygen propulsion technology readiness for the Initial Operating Capability (IOC) space station application, specifically gaseous hydrogen/oxygen and warm hydrogen thruster concepts, and to establish a means for evolving from the IOC space station propulsion to that required to support and interface with advanced station functions. The evaluation of concepts was completed. The accumulator module of the test bed was completed and, with the microprocessor controller, delivered to NASA-MSFC. An oxygen/hydrogen thruster was modified for use with the test bed and successfully tested at mixture ratios from 4:1 to 8:1.

X-33

NASA Image and Video Library

2004-04-15

This is an artist's concept of the completely operational International Space Station being approached by an X-33 Reusable Launch Vehicle (RLV). The X-33 program was designed to pave the way to a full-scale, commercially developed RLV as the flagship technology demonstrator for technologies that would lower the cost of access to space. It is unpiloted, taking off vertically like a rocket, reaching an altitude of up to 60 miles and speeds between Mach 13 and 15, and landing horizontally like an airplane. The X-33 program was cancelled in 2001.

Water Science and Technology Board annual report 1989

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-01-01

This report summarizes the activities of the Water Science and Technology Board (WSTB) and its subgroups during 1989, it seventh year of existence. It describes current and recently completed projects, new activities scheduled to begin in 1990, and plans for the future. The report also includes information on Board and committee memberships, program operational features, and reports produced during the past several years. This annual report is an introduction to the WSTB and its program for the year. 4 figs.

Online public health preparedness training programs: an evaluation of user experience with the technological environment.

PubMed

Nambisan, Priya

2010-01-01

Several public health education programs and government agencies across the country have started offering virtual or online training programs in emergency preparedness for people who are likely to be involved in managing or responding to different types of emergency situations such as natural disasters, epidemics, bioterrorism, etc. While such online training programs are more convenient and cost-effective than traditional classroom-based programs, their success depends to a great extent on the underlying technological environment. Specifically, in an online technological environment, different types of user experiences come in to play-users' utilitarian or pragmatic experience, their fun or hedonic experience, their social experience, and most importantly, their usability experience-and these different user experiences critically shape the program outcomes, including course completion rates. This study adopts a multi-disciplinary approach and draws on theories in human computer interaction, distance learning theories, usability research, and online consumer behavior to evaluate users' experience with the technological environment of an online emergency preparedness training program and discusses its implications for the design of effective online training programs. . Data was collected using a questionnaire from 377 subjects who had registered for and participated in online public health preparedness training courses offered by a large public university in the Northeast. Analysis of the data indicates that as predicted, participants had higher levels of pragmatic and usability experiences compared to their hedonic and sociability experiences. Results also indicate that people who experienced higher levels of pragmatic, hedonic, sociability and usability experiences were more likely to complete the course(s) they registered for compared to those who reported lower levels. The study findings hold important implications for the design of effective online emergency preparedness training targeted at diverse audiences including the general public, health care and public health professionals, and emergency responders. Strategies for improving participants' pragmatic, hedonic, sociability and usability experiences are outlined. There are ample opportunities to improve the pragmatic, hedonic, sociability and usability experiences of the target audience. This is critical to improve the participants' learning and retention as well as the completion rates for the courses offered. Online emergency preparedness programs are likely to play a crucial role in preparing emergency responders at all levels in the future and their success has critical implications for public health informatics.

Outcomes and Processes in the Meyerhoff Scholars Program: STEM PhD Completion, Sense of Community, Perceived Program Benefit, Science Identity, and Research Self-Efficacy

ERIC Educational Resources Information Center

Maton, Kenneth I.; Beason, Tiffany S.; Godsay, Surbhi; Domingo, Mariano R. Sto.; Bailey, TaShara C.; Sun, Shuyan; Hrabowski, Freeman A., III

2016-01-01

Previous research has shown that the Meyerhoff Scholars Program at the University of Maryland, Baltimore County, is an effective intervention for high-achieving underrepresented minority (URM) students; African-American Meyerhoff students are significantly more likely to enter science, technology, engineering, and mathematics (STEM) PhD programs…

Cardiac patients show high interest in technology enabled cardiovascular rehabilitation.

PubMed

Buys, Roselien; Claes, Jomme; Walsh, Deirdre; Cornelis, Nils; Moran, Kieran; Budts, Werner; Woods, Catherine; Cornelissen, Véronique A

2016-07-19

Cardiac rehabilitation (CR) can slow or reverse the progression of cardiovascular disease (CVD). However, uptake of community-based CR is very low. E-cardiology, e-health and technology solutions for physical activity uptake and monitoring have evolved rapidly and have potential in CVD management. However, it is unclear what the current technology usage is of CVD patients, and their needs and interests for technology enabled CR. A technology usage questionnaire was developed and completed by patients from a supervised ambulatory CR program and an adult congenital heart disease clinic and from two community-based CR programs. Results were described and related with age, gender and educational level by Spearman correlations. Of 310 patients, 298 patients (77 % male; mean age 61,7 ± 14,5 years) completed at least 25 questions of the survey and were included in the analysis (completion rate 96 %). Most (97 %) patients had a mobile phone and used the internet (91 %). Heart rate monitors were used by 35 % and 68 % reported to find heart rate monitoring important when exercising at home. Physical activity monitoring was reported by 12 % of the respondents. Respondents were interested in CR support through internet (77 %) and mobile phone (68 %). Many patients reported interest in game-based CR (67 %) and virtual rehabilitation (58 %). At least medium interest in technology enabled CR was reported by 75 % of the patients. Interest decreased with increasing age (r = -0.16; p = 0.005). CVD patients show interest for technology enabled home-based CR. Our results could guide the design of a technology-based, virtual CR intervention.

Industrial advanced turbine systems: Development and demonstration. Annual report, October 1, 1996--September 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The US DOE has initiated a program for advanced turbine systems (ATS) that will serve industrial power generation markets. The ATS will provide ultra-high efficiency, environmental superiority, and cost competitiveness. The ATS will foster (1) early market penetration that enhances the global competitiveness of US industry, (2) public health benefits resulting from reduced exhaust gas emissions of target pollutants, (3) reduced cost of power used in the energy-intensive industrial marketplace and (4) the retention and expansion of the skilled US technology base required for the design, development and maintenance of state-of-the-art advanced turbine products. The Industrial ATS Development and Demonstrationmore » program is a multi-phased effort. Solar Turbines Incorporated (Solar) has participated in Phases 1 and 2 of the program. On September 14, 1995 Solar was awarded a Cooperative Agreement for Phases 3 and 4 of the program. Phase 3 of the work is separated into two subphases: Phase 3A entails Component Design and Development Phase 3B will involve Integrated Subsystem Testing. Phase 4 will cover Host Site Testing. Forecasts call for completion of the program within budget as originally estimated. Scheduled completion is forecasted to be approximately 3 years late to original plan. This delay has been intentionally planned in order to better match program tasks to the anticipated availability of DOE funds. To ensure the timely realization of DOE/Solar program goals, the development schedule for the smaller system (Mercury 50) and enabling technologies has been maintained, and commissioning of the field test unit is scheduled for May of 2000. As of the end of the reporting period work on the program is 22.80% complete based upon milestones completed. This measurement is considered quite conservative as numerous drawings on the Mercury 50 are near release. Variance information is provided in Section 4.0-Program Management.« less

Quarter Scale RLV Multi-Lobe LH2 Tank Test Program

NASA Technical Reports Server (NTRS)

Blum, Celia; Puissegur, Dennis; Tidwell, Zeb; Webber, Carol

1998-01-01

Thirty cryogenic pressure cycles have been completed on the Lockheed Martin Michoud Space Systems quarter scale RLV composite multi-lobe liquid hydrogen propellant tank assembly, completing the initial phases of testing and demonstrating technologies key to the success of large scale composite cryogenic tankage for X33, RLV, and other future launch vehicles.

Learning To Compete: Post-graduate Training in an Aerospace Company.

ERIC Educational Resources Information Center

Hyland, Paul; Sloan, Terry; Beckett, Ron

2002-01-01

A master of technology management degree program was offered to aerospace employees on site; many completed modules and 20 completed degrees. Responses from 38.5% of 65 participants indicated both personal and company benefits (improved capacity for change, movement toward a learning culture), but some experienced problems in applying learning on…

Pathways to the Geosciences Summer High School Program: A Ten-Year Evaluation

ERIC Educational Resources Information Center

Carrick, Tina L.; Miller, Kate C.; Hagedorn, Eric A.; Smith-Konter, Bridget R.; Velasco, Aaron A.

2016-01-01

The high demand for scientists and engineers in the workforce means that there is a continuing need for more strategies to increase student completion in science, technology, engineering, and mathematics (STEM) majors. The challenge lies in finding and enacting effective strategies to increase students' completion of STEM degrees and in recruiting…

Ceramic applications in turbine engines

NASA Technical Reports Server (NTRS)

Helms, H. E.; Heitman, P. W.; Lindgren, L. C.; Thrasher, S. R.

1984-01-01

The application of ceramic components to demonstrate improved cycle efficiency by raising the operating temperature of the existing Allison IGI 404 vehicular gas turbine engine is discussed. This effort was called the Ceramic Applications in Turbine Engines (CATE) program and has successfully demonstrated ceramic components. Among these components are two design configurations featuring stationary and rotating caramic components in the IGT 404 engine. A complete discussion of all phases of the program, design, materials development, fabrication of ceramic components, and testing-including rig, engine, and vehicle demonstation test are presented. During the CATE program, a ceramic technology base was established that is now being applied to automotive and other gas turbine engine programs. This technology base is outlined and also provides a description of the CATE program accomplishments.

Aviation System Technology Advanced Research Program - AvSTAR

NASA Technical Reports Server (NTRS)

Denery, Dallas G.

2001-01-01

The objectives of this presentation is to provide the research and development by 2007 necessary to: complete the development of technology for tomorrow (Free-Flight); provide the foundations for setting the direction for the future (Beyond Free-Flight). The goals are to establish tomorrow's as well as the future's Air transportation system.

An Analysis of Professional Practice Ed.D. Dissertations in Educational Technology

ERIC Educational Resources Information Center

Dawson, Kara; Kumar, Swapna

2014-01-01

The University of Florida offers an online professional practice Ed.D. focused on Educational Technology. Twenty-three students have completed professional practice dissertations and graduated since the program's inception in 2008. The purpose of this article is to share what these dissertations have looked like and to begin a dialogue about…

Communities of Ethical Practice: Using New Technologies for Ethical Dialectical Discourse

ERIC Educational Resources Information Center

Newman, Linda; Findlay, John

2008-01-01

The authors report on a project in which a new experiential form of professional learning combined ethical thinking processes with a collaborative meeting technology known as the Zing team learning system (ZTLS). A new software program called "Working Wisely" was built by the completion of the project. The ZTLS in combination with…

Graduate Students' Interests in Technology Training: Results of a Survey.

ERIC Educational Resources Information Center

Fahy, Patrick J.

A two-part survey of 69 students (35 percent response) enrolled in the Master's of Distance Education (MDE) program at Athabasca University in December 1996 addressed three questions: (1) what specific technologies were of most interest to MDE students; (2) whether students accustomed to studying completely at a distance would accept a proposed…

Report from a Multi-Institutional Randomized Clinical Trial Examining Computer-Assisted Problem-Solving Skills Training for English- and Spanish-Speaking Mothers of Children with Newly Diagnosed Cancer

PubMed Central

Sahler, Olle Jane Z.; Sherman, Sandra A.; Fairclough, Diane L.; Butler, Robert W.; Katz, Ernest R.; Dolgin, Michael J.; Varni, James W.; Noll, Robert B.; Phipps, Sean

2009-01-01

Objectives To evaluate the feasibility and efficacy of a handheld personal digital assistant (PDA)-based supplement for maternal Problem-Solving Skills Training (PSST) and to explore Spanish-speaking mothers’ experiences with it. Methods Mothers (n = 197) of children with newly diagnosed cancer were randomized to traditional PSST or PSST + PDA 8-week programs. Participants completed the Social Problem-Solving Inventory-Revised, Beck Depression Inventory-II, Profile of Mood States, and Impact of Event Scale-Revised pre-, post-treatment, and 3 months after completion of the intervention. Mothers also rated optimism, logic, and confidence in the intervention and technology. Results Both groups demonstrated significant positive change over time on all psychosocial measures. No between-group differences emerged. Despite technological “glitches,” mothers expressed moderately high optimism, appreciation for logic, and confidence in both interventions and rated the PDA-based program favorably. Technology appealed to all Spanish-speaking mothers, with younger mothers showing greater proficiency. Conclusions Well-designed, supported technology holds promise for enhancing psychological interventions. PMID:19091804

Fellowships for Students Pursuing Interdisciplinary MS with a Focus on Wind Energy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Naughton, Jonathan W.

The production of electricity from wind has grown rapidly in the U.S. and abroad. A problem generated by this rapid growth is the need for a highly trained workforce as has been discussed openly in recent workshops and in discussions with wind energy manufacturers and developers. In addition, the 20% by 2030 report lists workforce development as among the critical needs if the initiative is to succeed. This report also identified that, for this initiative to succeed, many of the wind energy related technologies needed to advance. As a result, a critical component of the workforce development is the highlymore » trained personnel that can contribute to this technology advancement. The objective of this effort was to attract several highly qualified candidates to pursue a wind-energy focused interdisciplinary degree at the Masters Degree level. Since it was desired to produce these candidates as quickly as possible, fellowships were to be provided to the best candidates so that they could complete their degree quickly and transition to the workforce in the minimum time possible. In the course of advertising for these high quality candidates, it was hoped that other students would also be made aware of the educational and research opportunities offered by the Wind Energy Research Center (WERC). To ensure a wind energy focus for the students, a curriculum focused on wind was encouraged, but the curriculum was sufficiently flexible to allow the students to tailor the experience to meet their interests. Options for the students included internships or a thesis in addition to coursework only programs. The results of this effort are considered to be an overall success. Six students started the program and all have either completed or are in the last stages of completing the program. Individuals with a broad range of backgrounds started the program demonstrating that students from many areas can successfully complete such a program. On average, the students took longer than the expected three semesters and summer to complete the program, but this was largely due to the choices they made in their degree programs. All of the students completing their degree have either moved on to employment, graduate school, or are finishing up their degrees and actively looking for their next position. The outcomes of this program can thus serve to guide institutions looking to develop a similar program« less

Preparing technicians for engineering materials technology

NASA Technical Reports Server (NTRS)

Jacobs, James A.; Metzloff, Carlton H.

1990-01-01

A long held principle is that for every engineer and scientist there is a need for ten technicians to maximize the efficiency of the technology team for meeting needs of industry and government. Developing an adequate supply of technicians to meet the requirements of the materials related industry will be a challenge and difficult to accomplish. A variety of agencies feel the need and wish to support development of engineering materials technology programs. In a joint effort among Battelle Laboratories, the Department of Energy (DOE) and Northwest College and University Association for Science (NORCUS), the development of an engineering materials technology program for vocational programs and community colleges for the Pacific Northwest Region was recently completed. This effort has implications for a national model. The model Associate of Applied Science degree in Engineering Materials Technology shown provides a general structure. It purposely has course titles which need delimiting while also including a core of courses necessary to develop cognitive, affective and psychomotor skills with the underlining principles of math, science and technology so students have job entry skills, and so that students can learn about and adapt to evolving technology.

Environmental Management Technology Leveraging Initiative. Topical report, October 1, 1995--September 30, 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-12-31

The ``Environmental Management Technology Leveraging Initiative,`` a cooperative agreement between the Global Environment and Technology Foundation and the Department of Energy-Morgantown Energy Technology Center, has completed its second year. This program, referred to as the Global Environmental Technology Enterprise (GETE) is an experiment to bring together the public and private sectors to identify, formulate, promote and refine methods to develop more cost-effective clean-up treatments. Working closely with Department of Energy officials, National Laboratory representatives, business people, academia, community groups, and other stakeholders, this program attempts to commercialize innovative, DOE-developed technologies. The methodology to do so incorporates three elements: business assistance,more » information, and outreach. A key advance this year was the development of a commercialization guidance document which can be used to diagnose the commercialization level and needs for innovative technologies.« less

The 1995 NASA guide to graduate support

NASA Technical Reports Server (NTRS)

1994-01-01

The future of the United States is in the classrooms of America and tomorrow's scientific and technological capabilities are derived from today's investments in research. In 1980, NASA initiated the Graduate Student Researchers Program (GSRP) to cultivate additional research ties to the academic community and to support promising students pursuing advanced degrees in science and engineering. Since then, approximately 1300 students have completed the program's requirements. In 1987, the program was expanded to include the Underrepresented Minority and Disabled Focus (UMDF) Component. This program was designed to increase participation of underrepresented groups in graduate study and research and, ultimately, in space science and aerospace technology careers. Approximately 270 minority students have completed the program's requirements while making significant contributions to the nation's aerospace efforts. Continuing to expand fellowship opportunities, NASA announced the Graduate Student Fellowships in Global Change Research in 1990. Designed to support the rapid growth in the study of earth as a system, more than 250 fellowships have been awarded. And, in 1992, NASA announced opportunities in the multiagency High Performance Computing and Communications (HPCC) Program designed to accelerate the development and application of massively parallel processing. Approximately five new fellowships will be awarded yearly. This booklet will guide you in your efforts to participate in programs for graduate student support.

CAD/CAM fabricated complete dentures: concepts and clinical methods of obtaining required morphological data.

PubMed

Goodacre, Charles J; Garbacea, Antoanela; Naylor, W Patrick; Daher, Tony; Marchack, Christopher B; Lowry, Jean

2012-01-01

The clinical impression procedures described in this article provide a method of recording the morphology of the intaglio and cameo surfaces of complete denture bases and also identify muscular and phonetic locations for the prosthetic teeth. When the CAD/CAM technology for fabricating complete dentures becomes commercially available, it will be possible to scan the denture base morphology and tooth positions recorded with this technique and import those data into a virtual tooth arrangement program where teeth can be articulated and then export the data to a milling device for the fabrication of the complete dentures. A prototype 3-D tooth arrangement program is described in this article that serves as an example of the type of program than can be used to arrange prosthetic teeth virtually as part of the overall CAD/CAM fabrication of complete dentures. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Interactive Virtual Suturing Simulations: Enhancement of Student Learning in Veterinary Medicine

ERIC Educational Resources Information Center

Staton, Amy J.; Boyd, Christine B.

2013-01-01

This capstone addresses an instructional gap in the Morehead State University Veterinary Technology Program and in other similar programs around the globe. Students do not retain the knowledge needed to proficiently complete suture patterns nor do students receive sufficient instructional time during the year to master each suture pattern that is…

76 FR 67558 - Proposed Information Collection (Request for Change of Program or Place of Training) Activity...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

... information needed to determine a claimant's eligibility for continued educational assistance when he or she... use of other forms of information technology. Title: Request for Change of Program or Place of... collection. Abstract: Claimants receiving educational benefits complete VA Form 22-1995 to request a change...

Industry to Education Technology Transfer Program. Composite Materials--Personnel Development. Final Report.

ERIC Educational Resources Information Center

Tomezsko, Edward S. J.

A composite materials education program was established to train Boeing Helicopter Company employees in the special processing of new filament-reinforced polymer composite materials. During the personnel development phase of the joint Boeing-Penn State University project, an engineering instructor from Penn State completed a 5-month, full-time…

Career and Technical Education as Pathways: Factors Influencing Postcollege Earnings of Selected Career Clusters

ERIC Educational Resources Information Center

Compton, Jonathan I.; Laanan, Frankie Santos; Starobin, Soko S.

2010-01-01

This study investigated the relationship between student characteristics such as gender, race/ethnicity, program of study, degree completion, and earnings outcomes for students enrolled in career and technical education (CTE) programs within the business, information technology (IT), and marketing career clusters in community colleges to determine…

The Advanced Communications Technology Satellite - Performance, Reliability and Lessons Learned

NASA Technical Reports Server (NTRS)

Krawczyk, Richard J.; Ignaczak, Louis R.

2000-01-01

The Advanced Communications Satellite (ACTS) was conceived and developed in the mid- 1980s as an experimental satellite to demonstrate unproven Ka-band technology, and potential new commercial applications and services. Since launch into geostationary orbit in September 1993. ACTS has accumulated almost seven years of essentially trouble-free operation and met all program objectives. The unique technology, service experiments. and system level demonstrations accomplished by ACTS have been reported in many forums over the past several years. As ACTS completes its final experiments activity, this paper will relate the top-level program goals that have been achieved in the design, operation, and performance of the particular satellite subsystems. Pre-launch decisions to ensure satellite reliability and the subsequent operational experiences contribute to lessons learned that may be applicable to other comsat programs.

Rocket-Based Combined Cycle Activities in the Advanced Space Transportation Program Office

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Turner, James

1999-01-01

NASA's Office of Aero-Space Technology (OAST) has established three major goals, referred to as, "The Three Pillars for Success". The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center (MSFC) in Huntsville, Ala. focuses on future space transportation technologies Under the "Access to Space" pillar. The Core Technologies Project, part of ASTP, focuses on the reusable technologies beyond those being pursued by X-33. One of the main activities over the past two and a half years has been on advancing the rocket-based combined cycle (RBCC) technologies. In June of last year, activities for reusable launch vehicle (RLV) airframe and propulsion technologies were initiated. These activities focus primarily on those technologies that support the decision to determine the path this country will take for Space Shuttle and RLV. This year, additional technology efforts in the reusable technologies will be awarded. The RBCC effort that was completed early this year was the initial step leading to flight demonstrations of the technology for space launch vehicle propulsion.

Next-generation avionics packaging and cooling 'test results from a prototype system'

NASA Astrophysics Data System (ADS)

Seals, J. D.

The author reports on the design, material characteristics, and test results obtained under the US Air Force's advanced aircraft avionics packaging technologies (AAAPT) program, whose charter is to investigate new designs and technologies for reliable packaging, interconnection, and thermal management. Under this program, AT&T Bell Laboratories has completed the preliminary testing of and is evaluating a number of promising materials and technologies, including conformal encapsulation, liquid flow-through cooling, and a cyanate ester backplane. A fifty-two module system incorporating these and and other technologies has undergone preliminary cooling efficiency, shock, sine and random vibration, and maintenance testing. One of the primary objectives was to evaluate the interaction compatibility of new materials and designs with other components in the system.

NASA's In Space Propulsion Technology Program Accomplishments and Lessons Learned

NASA Technical Reports Server (NTRS)

Johnson, Les C.; Harris, David

2008-01-01

NASA's In-Space Propulsion Technology (ISPT) Program was managed for 5 years at the NASA MSFC and significant strides were made in the advancement of key transportation technologies that will enable or enhance future robotic science and deep space exploration missions. At the program's inception, a set of technology investment priorities were established using an NASA-wide, mission-driven prioritization process and, for the most part, these priorities changed little - thus allowing a consistent framework in which to fund and manage technology development. Technologies in the portfolio included aerocapture, advanced chemical propulsion, solar electric propulsion, solar sail propulsion, electrodynamic and momentum transfer tethers, and various very advanced propulsion technologies with significantly lower technology readiness. The program invested in technologies that have the potential to revolutionize the robotic exploration of deep space. For robotic exploration and science missions, increased efficiencies of future propulsion systems are critical to reduce overall life-cycle costs and, in some cases, enable missions previously considered impossible. Continued reliance on conventional chemical propulsion alone will not enable the robust exploration of deep space - the maximum theoretical efficiencies have almost been reached and they are insufficient to meet needs for many ambitious science missions currently being considered. By developing the capability to support mid-term robotic mission needs, the program was to lay the technological foundation for travel to nearby interstellar space. The ambitious goals of the program at its inception included supporting the development of technologies that could support all of NASA's missions, both human and robotic. As time went on and budgets were never as high as planned, the scope of the program was reduced almost every year, forcing the elimination of not only the broader goals of the initial program, but also of funding for over half of the technologies in the original portfolio. In addition, the frequency at which the application requirements for the program changed exceeded the development time required to mature technologies: forcing sometimes radical rescoping of research efforts already halfway (or more) to completion. At the end of its fifth year, both the scope and funding of the program were at a minimum despite the program successfully meeting all of it's initial high priority objectives. This paper will describe the program, its requirements, technology portfolio, and technology maturation processes. Also discussed will be the major technology milestones achieved and the lessons learned from managing a $100M+ technology program.

Evaluating the Effectiveness of the 2003-2004 NASA SCIence Files(trademark) Program

NASA Technical Reports Server (NTRS)

Caton, Randall H.; Ricles, Shannon S.; Pinelli, Thomas E.; Legg, Amy C.; Lambert, Matthew A.

2005-01-01

The NASA SCI Files is an Emmy award-winning series of instructional programs for grades 3-5. Produced by the NASA Center for Distance Learning, programs in the series are research-, inquiry-, standards-, teacher- and technology-based. Each NASA SCI Files program (1) integrates mathematics, science, and technology; (2) uses Problem-Based Learning (PBL) to enhance and enrich the teaching and learning of science; (3) emphasizes science as inquiry and the scientific method; (4) motivates students to become critical thinkers and active problem solvers; and (5) uses NASA research, facilities, and personnel to raise student awareness of careers and to exhibit the "real-world" application of mathematics, science, and technology. In April 2004, 1,500 randomly selected registered users of the NASA SCI Files were invited to complete a survey containing a series of questions. A total of 263 surveys were received. This report contains the quantitative and qualitative results of that survey.

Configuration Management at NASA

NASA Technical Reports Server (NTRS)

Doreswamy, Rajiv

2013-01-01

NASA programs are characterized by complexity, harsh environments and the fact that we usually have one chance to get it right. Programs last decades and need to accept new hardware and technology as it is developed. We have multiple suppliers and international partners Our challenges are many, our costs are high and our failures are highly visible. CM systems need to be scalable, adaptable to new technology and span the life cycle of the program (30+ years). Multiple Systems, Contractors and Countries added major levels of complexity to the ISS program and CM/DM and Requirements management systems center dot CM Systems need to be designed for long design life center dot Space Station Design started in 1984 center dot Assembly Complete in 2012 center dot Systems were developed on a task basis without an overall system perspective center dot Technology moves faster than a large project office, try to make sure you have a system that can adapt

Single-stage-to-orbit: Meeting the challenge

NASA Astrophysics Data System (ADS)

Freeman, Delma C., Jr.; Talay, Theodore A.; Austin, Robert Eugene

1995-10-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, and X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

Single-stage-to-orbit — Meeting the challenge

NASA Astrophysics Data System (ADS)

Freeman, Delma C.; Talay, Theodore A.; Austin, Robert Eugene

1996-02-01

There has been and continues to be significant discussion about the viability of fully reusable, single-stage-to-orbit (SSTO) concepts for delivery of payloads to orbit. Often, these discussions have focused in detail on performance and technology requirements relating to the technical feasibility of the concept, with only broad generalizations on how the SSTO will achieve its economic goals of greatly reduced vehicle ground and flight operations costs. With the current industry and NASA Reusable Launch Vehicle Technology Program efforts underway to mature and demonstrate technologies leading to a viable commercial launch system that also satisfies national needs, achieving acceptable recurring costs becomes a significant challenge. This paper reviews the current status of the Reusable Launch Vehicle Technology Program including the DC-XA, X-33, X-34 flight systems and associated technology programs. The paper also examines lessons learned from the recently completed DC-X reusable rocket demonstrator program. It examines how these technologies and flight systems address the technical and operability challenges of SSTO whose solutions are necessary to reduce costs. The paper also discusses the management and operational approaches that address the challenge of a new cost-effective, reusable launch vehicle system.

Undergraduate design projects for assistive technology needs: assisted fishing.

PubMed

Borrego, Nick; Bilan, Kristi; Gebes, T J; Barrett, S F; Morton, S A

2012-01-01

In 2010 the University of Wyoming, College of Engineering and Applied Science was funded for a five year increment of the National Science Foundation’s Research to Aid Persons with Disabilities. This program provides a vital link between challenged individuals who require custom assistive technology devices with senior capstone design students who require challenging, meaningful projects. The program also provides education for our next generation of engineers on the needs of all individuals. In this paper we describe the program organization including project partners in the College and Wyoming Institute for Disabilities (WIND). We also provide a case study of a recently completed project for an assistive fishing device.

ECN-3945

NASA Image and Video Library

1974-02-21

The General Dynamics TACT/F-111A Aardvark is seen In a banking-turn over the California Mojave desert. This photograph affords a good view of the supercritical wing airfoil shape. Starting in 1971 the NASA Flight Research Center and the Air Force undertook a major research and flight testing program, using F-111A (#63-9778), which would span almost 20 years before completion. Intense interest over the results coming from the NASA F-8 supercritical wing program spurred NASA and the Air Force to modify the General Dynamics F-111A to explore the application of supercritical wing technology to maneuverable military aircraft. This flight program was called Transonic Aircraft Technology (TACT).

Engineering Development Program of a Closed Aluminum-Oxygen Semi-cell System for an Unmanned Underwater Vehicle: An Update

NASA Technical Reports Server (NTRS)

Gregg, Dane W.; Hall, Susan E.

1996-01-01

Most emerging unmanned undersea vehicle (UUV) missions require significantly longer range and endurance than is achievable with existing battery technology. The Aluminum-Oxygen (Al-O2) semi-cell is a candidate technology capable of providing a significant improvement in endurance compared to the silver-zinc battery technology currently in use in UUVs and compares favorably to other proposed UUV power systems not only in performance, but also in safety and logistics. An Al-O2 semi-cell system is under development, consisting of a cell stack, gas management, oxygen storage, electrolyte management coolant and controller subsystems. It is designed to replace the existing silver-zinc battery and meet existing weight, volume, electrical and thermal requirements, therefore minimizing modification to the UUV. A detailed system design is complete. A component and material endurance test to evaluate compatibility and reliability of various materials and components is complete. Sub=scale (short stack) system testing is complete. A full-scale demonstration unit is now under construction for testing in the second half of 1995. The full scale demonstration test will simulate environmental conditions of the operational system. This paper summarizes the results of the extensive short stack and endurance test programs, describes the plan for full-scale testing, and concludes with a brief discussion of future directions for this technology.

Technology Use as Transformative Pedagogy: Using Video Editing Technology to Learn about Teaching

ERIC Educational Resources Information Center

Macy, Michelle

2011-01-01

Within the paradigm of Sociocultural Theory, and using Activity Theory as a data-gathering and management tool, this microgenetic case study examined the processes--the growth, change, and development--engaged in by student-teachers in a foreign language education program as they worked together to complete an activity. The activity involved…

Defense Science and Technology RELIANCE. Defense Technology Objectives Success Stories

DTIC Science & Technology

2001-03-01

27 MD.04 Medical Countermeasures for Botulinum Toxin ...flexibility of U.S. forces. Completed. 1998 SPONSORS DoD Chemical and Biological Defense Program MEDICAL COUNTERMEASURES FOR BOTULINUM TOXIN (MD.04) 29...system operates satisfactorily against a high-level jamming environment in the target area. On four AGTFT free flights, the AGTFT flight test vehicles

Use of Instructional Technologies in Science Classrooms: Teachers' Perspectives

ERIC Educational Resources Information Center

Savasci Açikalin, Funda

2014-01-01

The purpose of this study was to investigate how science teachers use instructional technologies in science classrooms. Participants were 63 teachers who have just completed an alternative teaching certificate program in one of the largest universities in Turkey. They were asked to make a lesson plan based on any topic by assuming that they had an…

Finding Edges and Lines in Images.

DTIC Science & Technology

1983-06-01

34 UNCLASSI FlED , SECURITY CLASSIFICATION OF THIS PAGE ("osen Data Entered) READ INSTRUCTIONSREPORT DOCUMENTATION PAGE BEFORE COMPLETING FORM I. REPORT...PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK Artificial Intelligence Laboratory AREA&WORKUNITNUMBERS 545 Technology Square...in the Artificial Intelligence Laboratory of the Massachusetts Institute of Technology. Support for the laboratory’s artificial intelligence research

PRDA-2 and 3 Brush Seal Development Programs at EG and G

NASA Technical Reports Server (NTRS)

Loewenthal, Robert G.

1996-01-01

EG&G Mechanical Components Technology Group R&D completed a Brush Seal Development Program under PRDA-2 in late 1992. We started the Advanced Brush Seal Development program, under PRDA-3, in 1993 and will complete it in 1996. Both programs have been funded by the United States Air Force. In the first program, we made significant gains in the area of tribopairs (bristle materials vs. shaft coatings) and the 'Low Hysteresis' design for brush seals. These were reported in two AIAA Propulsion Conference papers, and the 'Low Hysteresis' design has been patented. Seals were delivered for test in an Air Force demonstrator at Allison. In PRDA-3, goals are to increase the pressure sealing capability, and the surface speeds and temperatures at which brush seals can be used. We have conducted part of the design and testing and have tested brush seals successfully at more severe conditions than in the previous program. We are continuing with the program, and will complete it in time to furnish brush seals for an Air Force Demonstrator test in 1997.

Review of defense display research programs

NASA Astrophysics Data System (ADS)

Tulis, Robert W.; Hopper, Darrel G.; Morton, David C.; Shashidhar, Ranganathan

2001-09-01

Display research has comprised a substantial portion of the defense investment in new technology for national security for the past 13 years. These investments have been made by the separate service departments and, especially, via several Defense Research Projects Agency (DARPA) programs, known collectively as the High Definition Systems (HDS) Program (which ended in 2001) and via the Office of the Secretary of Defense (OSD) Defense Production Act (DPA) Title III Program (efforts ended in 2000). Using input from the Army, Navy, and Air Force to focus research and identify insertion opportunities, DARPA and the Title III Program Office have made investments to develop the national technology base and manufacturing infrastructure necessary to meet the twin challenge of providing affordable displays in current systems and enabling the DoD strategy of winning future conflicts by getting more information to all participants during the battle. These completed DARPA and DPA research and infrastructure programs are reviewed. Service investments have been and are being made to transition display technology; examples are described. Display science and technology (S&T) visions are documented for each service to assist the identification of areas meriting consideration for future defense research.

In-Suit Doppler Technology Assessment

NASA Technical Reports Server (NTRS)

Schulze, Arthur E.; Greene, Ernest R.; Nadeau, John J.

1991-01-01

The objective of this program was to perform a technology assessment survey of non-invasive air embolism detection utilizing Doppler ultrasound methodologies. The primary application of this technology will be a continuous monitor for astronauts while performing extravehicular activities (EVA's). The technology assessment was to include: (1) development of a full understanding of all relevant background research; and (2) a survey of the medical ultrasound marketplace for expertise, information, and technical capability relevant to this development. Upon completion of the assessment, LSR was to provide an overview of technological approaches and R&D/manufacturing organizations.

Evaluation of an online continuing education program from the perspective of new graduate nurses.

PubMed

Karaman, Selcuk; Kucuk, Sevda; Aydemir, Melike

2014-05-01

The aim of this study is to evaluate the online continuing education program from the perspectives of new graduate nurses. An evaluation framework includes five factors (program and course structure, course materials, technology, support services and assessment). In this study, descriptive research methods were used. Participants of the study included 2.365 registered nurses enrolled in the first online nursing bachelor completion degree program in the country. Data were collected by survey. The findings indicated that students were mostly satisfied with this program. The results of this study suggest that well designed asynchronous online education methods can be effective and appropriate for registered nurses. However, the provision of effective support and technological infrastructure is as vital as the quality of teaching for online learners. © 2013.

Water Science and Technology Board annual report 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-01-01

This annual report of the Water Science and Technology Board (WSTB) summarizes the activities of the Board and its subgroups during 1988, its sixth year of existence. Included are descriptions of current and recently completed projects, new activities scheduled to begin in 1989, and plans for the future. The report also includes information on Board and committee memberships, program operational features, and reports produced during the past several years. This annual report is intended to provide an introduction to the WSTB and summary of its program for the year.

A virtual patient software program to improve pharmacy student learning in a comprehensive disease management course.

PubMed

Douglass, Mark A; Casale, Jillian P; Skirvin, J Andrew; DiVall, Margarita V

2013-10-14

To implement and assess the impact of a virtual patient pilot program on pharmacy students' clinical competence skills. Pharmacy students completed interactive software-based patient case scenarios embedded with drug-therapy problems as part of a course requirement at the end of their third year. Assessments included drug-therapy problem competency achievement, performance on a pretest and posttest, and pilot evaluation survey instrument. Significant improvements in students' posttest scores demonstrated advancement of clinical skills involving drug-therapy problem solving. Students agreed that completing the pilot program improved their chronic disease management skills and the program summarized the course series well. Using virtual patient technology allowed for assessment of student competencies and improved learning outcomes.

A pilot demonstration project of technology application from the aerospace industry to city management (four cities program)

NASA Technical Reports Server (NTRS)

Ervin, G. F.; Blomeyer, L. S.

1972-01-01

The Four Cities Program has completed the first year of the planned two-year program. At the beginning of the first year, a variety of program initiation activities were accomplished. Contracts were negotiated; science and technology advisors were interviewed, selected and assigned; general indoctrination and integration of the advisors into city affairs occurred; technical needs were identified and related projects pursued; pilot projects for the second year were identified; inter-city coordination on technical problems began to emerge; and the general soundness of the four cities program seems to have been established. Above all, the inter-personal relationships between the advisors and their interfaces in city government appear to be functioning smoothly. The establishment of such mutual respect, trusts, and confidences are believed essential to the success of the program.

Solar buildings program contract summary, calendar year 1999

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2000-06-07

The mission of the US Department of Energy's Solar Buildings Program is to advance the development and widespread deployment of competitive solar thermal technologies for use in buildings. The long-term goal of the Program is to combine solar energy technologies with energy-efficient construction techniques and create cost-effective buildings that have a zero net need for fossil fuel energy on an annual basis. The Solar Buildings Program conducts research and development on solar technologies that can deliver heat, light, and hot water to residential and commercial buildings. By working closely with manufacturers in both the buildings and solar energy industries andmore » by supporting research at universities and national laboratories, the Solar Buildings Program brings together the diverse players developing reliable and affordable solar technologies for building applications. The National Renewable Energy Laboratory (NREL) in Golden, Colorado, and Sandia National Laboratories (SNL) in Albuquerque, New Mexico, jointly participate in the Solar Buildings Program. These two national laboratories work closely with industry researching new concepts, developing technology improvements, reducing manufacturing costs, monitoring system performance, promoting quality assurance, and identifying potential new markets. In calendar year 1999, the Solar Buildings Program focused primarily on solar hot water system research and development (R and D), US industry manufacturing assistance, and US market assistance. The Program also completed a number of other projects that were begun in earlier years. This Contract Summary describes the Program's contracted activities that were active during 1999.« less

Air transportation energy efficiency

NASA Technical Reports Server (NTRS)

Williams, L. J.

1977-01-01

The energy efficiency of air transportation, results of the recently completed RECAT studies on improvement alternatives, and the NASA Aircraft Energy Efficiency Research Program to develop the technology for significant improvements in future aircraft were reviewed.

Technology Report

NASA Technical Reports Server (NTRS)

Repucci, George

1996-01-01

This is the fourth report of a series of semi-annual reports that describe the technology areas being advanced under this contract and the progress achieved to date. The most significant technical event this period was the successful completion of the Lewis spacecraft in 2 years (contract award date was June 1994). In August of 1996 we held a program-wide Technology Workshop which covered all aspects of the Lewis payload. A copy of the Workshop proceedings is attached.

A compilation of technology spinoffs from the US Space Shuttle Program

NASA Technical Reports Server (NTRS)

Jackson, David Jeff

1993-01-01

As the successful transfer of NASA-developed technology is a stated mission of NASA, the documentation of such transfer is vital in support of the program. The purpose of this report is to document technology transfer, i.e. 'spinoffs', from the U.S. Space Shuttle Program to the commercial sector. These spinoffs have their origin in the many scientific and engineering fields associated with the shuttle program and, as such, span many diverse commercial applications. These applications include, but are not limited to, consumer products, medicine, industrial productivity, manufacturing technology, public safety, resources management, materials processing, transportation, energy, computer technology, construction, and environmental applications. To aide to the generation of this technology spinoff list, significant effort was made to establish numerous and complementary sources of information. The primary sources of information used in compiling this list include: the NASA 'Spinoff' publication, NASA Tech Briefs, the Marshall Space Flight Center (MSFC) Technology Utilization (TU) Office, the NASA Center for Aerospace Information (CASI), the NASA COSMIC Software Center, and MSFC laboratory and contractor personnel. A complete listing of resources may be found in the bibliography of this report. Additionally, effort was made to insure that the obtained information was placed in electronic database form to insure that the subsequent updating would be feasible with minimal effort.

Summary of Rocketdyne Engine A5 Rocket Based Combined Cycle Testing

NASA Technical Reports Server (NTRS)

Ketchum. A.; Emanuel, Mark; Cramer, John

1998-01-01

Rocketdyne Propulsion and Power (RPP) has completed a highly successful experimental test program of an advanced rocket based combined cycle (RBCC) propulsion system. The test program was conducted as part of the Advanced Reusable Technology program directed by NASA-MSFC to demonstrate technologies for low-cost access to space. Testing was conducted in the new GASL Flight Acceleration Simulation Test (FAST) facility at sea level (Mach 0), Mach 3.0 - 4.0, and vacuum flight conditions. Significant achievements obtained during the test program include 1) demonstration of engine operation in air-augmented rocket mode (AAR), ramjet mode and rocket mode and 2) smooth transition from AAR to ramjet mode operation. Testing in the fourth mode (scramjet) is scheduled for November 1998.

New York State Energy Research and Development Authority. Research projects` update project status as of March 31, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-07-01

This report provides an update of the New York State Energy Research and Development Authority (NYSERDA) program. The NYSERDA research and development program has five major areas: industry, buildings, energy resources, transportation, and environment. NYSERDA organizes projects within these five major areas based on energy use and supply, and end-use sectors. Therefore, issues such as waste management, energy products and renewable energy technologies are addressed in several areas of the program. The project descriptions presented are organized within the five program areas. Descriptions of projects completed between the period April 1, 1996, and March 31, 1997, including technology-transfer activities, aremore » at the end of each subprogram section.« less

Facility Activation and Characterization for IPD Workhorse Preburner and Oxidizer Turbopump Hot-Fire Testing at NASA Stennis Space Center

NASA Technical Reports Server (NTRS)

Sass, J. P.; Raines, N. G.; Ryan, H. M.

2004-01-01

The Integrated Powerhead Demonstrator (IPD) is a 250K lbf (1.1 MN) thrust cryogenic hydrogen/oxygen engine technology demonstrator that utilizes a full flow staged combustion engine cycle. The Integrated Powerhead Demonstrator (IPD) is part of NASA's Next Generation Launch Technology (NGLT) program, which seeks to provide safe, dependable, cost-cutting technologies for future space launch systems. The project also is part of the Department of Defense's Integrated High Payoff Rocket Propulsion Technology (IHPRPT) program, which seeks to increase the performance and capability of today s state-of-the-art rocket propulsion systems while decreasing costs associated with military and commercial access to space. The primary industry participants include Boeing-Rocketdyne and GenCorp Aerojet. The intended full flow engine cycle is a key component in achieving all of the aforementioned goals. The IPD Program recently achieved a major milestone with the successful completion of the IPD Oxidizer Turbopump (OTP) hot-fire test project at the NASA John C. Stennis Space Center (SSC) E-1 test facility in June 2003. A total of nine IPD Workhorse Preburner tests were completed, and subsequently 12 IPD OTP hot-fire tests were completed. The next phase of development involves IPD integrated engine system testing also at the NASA SSC E-1 test facility scheduled to begin in late 2004. Following an overview of the NASA SSC E-1 test facility, this paper addresses the facility aspects pertaining to the activation and testing of the IPD Workhorse Preburner and the IPD Oxidizer Turbopump. In addition, some of the facility challenges encountered during the test project shall be addressed.

Facility Activation and Characterization for IPD Oxidizer Turbopump Cold-Flow Testing at NASA Stennis Space Center

NASA Technical Reports Server (NTRS)

Sass, J. P.; Raines, N. G.; Farner, B. R.; Ryan, H. M.

2004-01-01

The Integrated Powerhead Demonstrator (IPD) is a 250K lbf (1.1 MN) thrust cryogenic hydrogen/oxygen engine technology demonstrator that utilizes a full flow staged combustion engine cycle. The Integrated Powerhead Demonstrator (IPD) is part of NASA's Next Generation Launch Technology (NGLT) program, which seeks to provide safe, dependable, cost-cutting technologies for future space launch systems. The project also is part of the Department of Defense's Integrated High Payoff Rocket Propulsion Technology (IHPRPT) program, which seeks to increase the performance and capability of today s state-of-the-art rocket propulsion systems while decreasing costs associated with military and commercial access to space. The primary industry participants include Boeing-Rocketdyne and GenCorp Aerojet. The intended full flow engine cycle is a key component in achieving all of the aforementioned goals. The IPD Program achieved a major milestone with the successful completion of the IPD Oxidizer Turbopump (OTP) cold-flow test project at the NASA John C. Stennis Space Center (SSC) E-1 test facility in November 2001. A total of 11 IPD OTP cold-flow tests were completed. Following an overview of the NASA SSC E-1 test facility, this paper addresses the facility aspects pertaining to the activation and the cold-flow testing of the IPD OTP. In addition, some of the facility challenges encountered during the test project are addressed.

The Potential Impact of Collaborative and Three-dimensional Imaging Technology on SHIPMAIN Fleet Modernization Plan

DTIC Science & Technology

2007-10-26

Ensign in April of 2002 via the Inservice Procurement Program. LT Seaman reported for duty as a staff hospital corpsman assigned to Naval Hospital Camp...Emergency Medical Technician training program and served as an Affiliate Faculty for the American Heart Association’s Basic Life Support Program. Through...the Inservice Procurement Program, he was commissioned as an Ensign in the Medical Service Corps in April of 2002 and completed Officer

Satellite services system analysis study. Volume 5: Programmatics

NASA Technical Reports Server (NTRS)

1981-01-01

The overall program and resources needed for development and operation of a Satellite Services System is reviewed. Program requirements covered system operations through 1993 and were completed in preliminary form. Program requirements were refined based on equipment preliminary design and analysis. Schedules, costs, equipment utilization, and facility/advanced technology requirements were included in the update. Equipment user charges were developed for each piece of equipment and for representative satellite servicing missions.

Technology-enhanced program for child disruptive behavior disorders: development and pilot randomized control trial.

PubMed

Jones, Deborah J; Forehand, Rex; Cuellar, Jessica; Parent, Justin; Honeycutt, Amanda; Khavjou, Olga; Gonzalez, Michelle; Anton, Margaret; Newey, Greg A

2014-01-01

Early onset disruptive behavior disorders are overrepresented in low-income families; yet these families are less likely to engage in behavioral parent training (BPT) than other groups. This project aimed to develop and pilot test a technology-enhanced version of one evidence-based BPT program, Helping the Noncompliant Child (HNC). The aim was to increase engagement of low-income families and, in turn, child behavior outcomes, with potential cost-savings associated with greater treatment efficiency. Low-income families of 3- to 8-year-old children with clinically significant disruptive behaviors were randomized to and completed standard HNC (n = 8) or Technology-Enhanced HNC (TE-HNC; n = 7). On average, caregivers were 37 years old; 87% were female, and 80% worked at least part-time. More than half (53%) of the youth were boys; the average age of the sample was 5.67 years. All families received the standard HNC program; however, TE-HNC also included the following smartphone enhancements: (a) skills video series, (b) brief daily surveys, (c) text message reminders, (d) video recording home practice, and (e) midweek video calls. TE-HNC yielded larger effect sizes than HNC for all engagement outcomes. Both groups yielded clinically significant improvements in disruptive behavior; however, findings suggest that the greater program engagement associated with TE-HNC boosted child treatment outcome. Further evidence for the boost afforded by the technology is revealed in family responses to postassessment interviews. Finally, cost analysis suggests that TE-HNC families also required fewer sessions than HNC families to complete the program, an efficiency that did not compromise family satisfaction. TE-HNC shows promise as an innovative approach to engaging low-income families in BPT with potential cost-savings and, therefore, merits further investigation on a larger scale.

Technology-Enhanced Program for Child Disruptive Behavior Disorders: Development and Pilot Randomized Control Trial

PubMed Central

Jones, Deborah J.; Forehand, Rex; Cuellar, Jessica; Parent, Justin; Honeycutt, Amanda; Khavjou, Olga; Gonzalez, Michelle; Anton, Margaret; Newey, Greg A.

2013-01-01

Objective Early onset Disruptive Behavior Disorders (DBDs) are overrepresented in low-income families; yet, these families are less likely to engage in Behavioral Parent Training (BPT) than other groups. This project aimed to develop and pilot test a technology-enhanced version of one evidence-based BPT program, Helping the Noncompliant Child (HNC). The aim was to increase engagement of low-income families and, in turn, child behavior outcomes, with potential cost-savings associated with greater treatment efficiency. Method Low-income families of 3-to-8 year old children with clinically-significant disruptive behaviors were randomized to and completed standard HNC (n =8) or technology-enhanced HNC (TE-HNC) (n = 7). On average, caregivers were 37 years old, female (87%), and most (80%) worked at least part-time. Half (53%) of the youth were boys, average age of the sample was 5.67 years. All families received the standard HNC program; however, TE-HNC also included the following smartphone-enhancements: (1). Skills video series; (2). Brief daily surveys; (3). Text message reminders; (4). Video recording home practice; and (5). Mid-week video calls. Results TE-HNC yielded larger effect sizes than HNC for all engagement outcomes. Both groups yielded clinically significant improvements in disruptive behavior; however, findings suggest that the greater program engagement associated with TE-HNC boosted child treatment outcome. Further evidence for the boost afforded by the technology is revealed in family responses to post-assessment interviews. Finally, cost analysis suggests that TE-HNC families also required fewer sessions than HNC families to complete the program, an efficiency that did not compromise family satisfaction. Conclusions TE-HNC shows promise as an innovative approach to engaging low-income families in BPT with potential cost-savings and, therefore, merits further investigation on a larger scale. PMID:23924046

Goddard Brouwer Orbit Bulletin

NASA Technical Reports Server (NTRS)

Morgan, D. B.; Gordon, R. A.

1971-01-01

The bulletin provides operational support for earth space research and technological missions by producing a tape containing pertinent spacecraft orbital information which is provided to a number of cities around the world in support of individual missions. A program description of the main and associated subroutines, and a complete description of the input, output and requirements of the bulletin program are presented.

OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE - A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gordon Tibbitts; Arnis Judzis

2001-10-01

This document details the progress to date on the OPTIMIZATION OF MUD HAMMER DRILLING PERFORMANCE -- A PROGRAM TO BENCHMARK THE VIABILITY OF ADVANCED MUD HAMMER DRILLING contract for the quarter starting July 2001 through September 2001. Accomplishments to date include the following: TerraTek highlighted DOE's National Energy Technology Laboratory effort on Mud Hammer Optimization at the recent Annual Conference and Exhibition for the Society of Petroleum Engineers. The original exhibit scheduled by NETL was canceled due to events surrounding the September tragedies in the US. TerraTek has completed analysis of drilling performance (rates of penetration, hydraulics, etc.) for themore » Phase One testing which was completed at the beginning of July. TerraTek jointly with the Industry Advisory Board for this project and DOE/NETL conducted a lessons learned meeting to transfer technology vital for the next series of performance tests. Both hammer suppliers benefited from the testing program and are committed to pursue equipment improvements and ''optimization'' in accordance with the scope of work. An abstract for a proposed publication by the society of Petroleum Engineers/International Association of Drilling Contractors jointly sponsored Drilling Conference was accepted as an alternate paper. Technology transfer is encouraged by the DOE in this program, thus plans are underway to prepare the paper for this prestigious venue.« less

Vehicle Technologies and Fuel Cell Technologies Office Research and Development Programs: Prospective Benefits Assessment Report for Fiscal Year 2018

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, T. S.; Birky, A.; Gohlke, David

Under a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies Offices of the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy invest in early-stage research of advanced batteries and electrification, engines and fuels, materials, and energy-efficient mobility systems; hydrogen production, delivery, and storage; and fuel cell technologies. This report documents the estimated benefits of successful development and implementation of advanced vehicle technologies. It presents a comparison of a scenario with completely successful implementation of Vehicle Technologies Office (VTO) and Fuel Cell Technologies Office (FCTO) technologies (the Program Success case) to a future in whichmore » there is no contribution after Fiscal Year 2017 by the VTO or FCTO to these technologies (the No Program case). Benefits were attributed to individual program technology areas, which included FCTO research and development and the VTO programs of electrification, advanced combustion engines and fuels, and materials technology. Projections for the Program Success case indicate that by 2035, the average fuel economy of on-road, light-duty vehicle stock could be 24% to 30% higher than in the No Program case, while fuel economy for on-road medium- and heavy-duty vehicle stock could be as much as 13% higher. The resulting petroleum savings in 2035 were estimated to be as high as 1.9 million barrels of oil per day, and reductions in greenhouse gas emissions were estimated to be as high as 320 million metric tons of carbon dioxide equivalent per year. Projections of light-duty vehicle adoption indicate that although advanced-technology vehicles may be somewhat more expensive to purchase, the fuel savings result in a net reduction of consumer cost. In 2035, reductions in annual fuel expenditures for vehicles (both light- and heavy-duty) are projected to range from $86 billion to $109 billion (2015$), while the projected increase in new vehicle expenditures in the same year ranges from $6 billion to $24 billion (2015$).« less

23 CFR 650.309 - Qualifications of personnel.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... Safety Inspector under the National Society of Professional Engineer's program for National Certification in Engineering Technologies (NICET) and have successfully completed an FHWA approved comprehensive...

23 CFR 650.309 - Qualifications of personnel.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... Safety Inspector under the National Society of Professional Engineer's program for National Certification in Engineering Technologies (NICET) and have successfully completed an FHWA approved comprehensive...

23 CFR 650.309 - Qualifications of personnel.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... Safety Inspector under the National Society of Professional Engineer's program for National Certification in Engineering Technologies (NICET) and have successfully completed an FHWA approved comprehensive...

Leveraging Technology to Create a Student-Focused Environment

ERIC Educational Resources Information Center

Thor, Linda M.; Moreau, Joseph

2016-01-01

This chapter uses Rio Salado College and the Online Education Initiative in the California Community Colleges to illustrate how community colleges can enhance system efficiency and student success in online learning and program completion.

Space station experiment definition: Long-term cryogenic fluid storage

NASA Technical Reports Server (NTRS)

Jetley, R. L.; Scarlotti, R. D.

1987-01-01

The conceptual design of a space station Technology Development Mission (TDM) experiment to demonstrate and evaluate cryogenic fluid storage and transfer technologies is presented. The experiment will be deployed on the initial operational capability (IOC) space station for a four-year duration. It is modular in design, consisting of three phases to test the following technologies: passive thermal technologies (phase 1), fluid transfer (phase 2), and active refrigeration (phase 3). Use of existing hardware was a primary consideration throughout the design effort. A conceptual design of the experiment was completed, including configuration sketches, system schematics, equipment specifications, and space station resources and interface requirements. These requirements were entered into the NASA Space Station Mission Data Base. A program plan was developed defining a twelve-year development and flight plan. Program cost estimates are given.

Technology and Higher Education: The Impact of E-Learning Approaches on Student Academic Achievement, Perceptions and Persistence

ERIC Educational Resources Information Center

Nora, Amaury; Snyder, Blanca Plazas

2009-01-01

While e-learning, Web-enhanced instruction, and other forms of instructional technology have been touted as an effective way of addressing student withdrawal and academic performance, there are those (Carr, 2000) that report both program and end-of-semester course completion rates in distance education courses as merely acceptable compared to more…

The A-Framework: The Role of Access, Attributes, and Affordance in the Adoption of Distance Education Technology for Lifestyle Change

ERIC Educational Resources Information Center

Tierney, Patrick J.; Moisey, Susan

2014-01-01

This exploratory mixed methods case study examined the use of distance education technology for lifestyle change within the context of obesity treatment and weight management. In the quantitative phase of the study, 19 adults involved in an obesity-related lifestyle change program or change process completed a questionnaire that determined their…

Gender Rationales in Selecting a Major in Information Technology at the Undergraduate Level of a University Program: A Focus Group Approach

ERIC Educational Resources Information Center

Mishra, Sushma; Draus, Peter; Caputo, Donald; Leone, Gregory; Kohun, Frederick; Repack, Diana

2014-01-01

Previous research studies of women applying to, enrolling and completing computing degrees at the undergraduate collegiate level suggest a significant underrepresentation of females in the Information Technology domain in the past decade. This study employs a focus group approach to the gender gap that encompasses forays into the qualitative…

Students Who Study Science, Technology, Engineering, and Mathematics (STEM) in Postsecondary Education. Stats in Brief. NCES 2009-161

ERIC Educational Resources Information Center

Chen, Xianglei

2009-01-01

Rising concern about America's ability to maintain its competitive position in the global economy has renewed interest in science, technology, engineering and mathematics (STEM) education. To understand who enters into and completes undergraduate programs in STEM fields, this report examined data from three major national studies: the 1995-96…

Introduction to MacDraft. High-Technology Training Module.

ERIC Educational Resources Information Center

Traxler, Gene

This training module on MacDraft is part of a computer drafting skills unit on communications technology for grades 9-12. The objective is for each student to complete a drawing on the MacIntosh computer using the MacDraft software program. This drawing is to be dimensioned with a dual system and is to include a border and title block. This module…

SIAST Retention Study. Factors Affecting Retention of First-Year Students in a Canadian Technical Institute of Applied Science and Technology.

ERIC Educational Resources Information Center

Sarkar, Gerlinde

All first-year students enrolled in diploma and certificate programs in the Saskatchewan Institute of Applied Science and Technology (SIAST) were surveyed to determine factors that influence student persistence. A questionnaire was mailed to 2,822 students in October 1991; 1,557 completed questionnaires were received and analyzed. A follow-up…

ECN-3931

NASA Image and Video Library

1974-01-28

This photograph shows a modified General Dynamics TACT/F-111A Aardvaark with supercritical wings installed. The aircraft, with flaps and landing gear down, is in a decending turn over Rogers Dry Lakebed at Edwards Air Force Base. Starting in 1971 the NASA Flight Research Center and the Air Force undertook a major research and flight testing program, using F-111A (#63-9778), which would span almost 20 years before completion. Intense interest over the results coming from the NASA F-8 supercritical wing program spurred NASA and the Air Force to modify the General Dynamics-Convair F-111A to explore the application of supercritical wing technology to maneuverable military aircraft. This flight program was called Transonic Aircraft Technology (TACT).

STEM Girls Night In at Goddard

NASA Image and Video Library

2016-11-05

Girls Night In was held at Goddard on Nov 4-5, 2016. This is a pilot program which reinvigorates, inspires, and engages high school girls who may be struggling or not fully engaged in STEM (Science, Technology Engineering and Math) education. The program allowed NASA women to share and demonstrate the work they do, provide the girls an opportunity to completely immerse themselves in Goddard science, technology, engineering and math as well as provide them activities that will challenge and promote knowledge and discovery. Goddard invites other NASA centers tolearn from this pilot program and work towards a simultaneous multicenter event in the future. Participating schools were: DuVal, Crossland, Flowers, High Point, Northwestern and Oxon Hill

STEM Girls Night In at Goddard

NASA Image and Video Library

2016-11-04

Girls Night In was held at Goddard on Nov 4-5, 2016. This is a pilot program which reinvigorates, inspires, and engages high school girls who may be struggling or not fully engaged in STEM (Science, Technology Engineering and Math) education. The program allowed NASA women to share and demonstrate the work they do, provide the girls an opportunity to completely immerse themselves in Goddard science, technology, engineering and math as well as provide them activities that will challenge and promote knowledge and discovery. Goddard invites other NASA centers tolearn from this pilot program and work towards a simultaneous multicenter event in the future. Participating schools were: DuVal, Crossland, Flowers, High Point, Northwestern and Oxon Hill

Fiscal year 1988 program report: Pennsylvania Center for Water Resources Research

DOE Office of Scientific and Technical Information (OSTI.GOV)

McDonnell, A.J.

1989-08-01

Three projects and a program of technology transfer were conducted under the Pennsylvania Fiscal Year 1988 State Water Resources Research Grants Program (PL 98-242, Sect. 104). In a completed study focused on the protection of water supplies, mature slow sand filters were found to remove 100 percent of Cryptosporidium and Giardia cysts. A site specific study examined the behavior of sedimentary iron and manganese in an acid mine drainage wetland system. A study was initiated to link a comprehensive non-point source model, AGNPS with current GIS technology to enhance the models' utility for evaluating regional water quality problems related tomore » non-point source agricultural pollution.« less

Resources: NASA for entrepreneurs

NASA Technical Reports Server (NTRS)

Jannazo, Mary Ann

1988-01-01

The services of NASA's Technology Utilization Program are detailed and highlights of spinoff products in various stages of completion are described. Areas discussed include: Stirling engines for automotive applications, klystron tubes used to reduce power costs at UHF television stations, sports applications of riblet film (e.g., boat racing), reinforced plastic for high-temperature applications, coating technology appropriate for such applications similar to the renovation of the Statue of Liberty, and medical uses of fuel pump technology (e.g., heart pumps).

Vehicle Technologies and Fuel Cell Technologies Program: Prospective Benefits Assessment Report for Fiscal Year 2016

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stephens, T. S.; Taylor, C. H.; Moore, J. S.

Under a diverse set of programs, the Vehicle Technologies and Fuel Cell Technologies offices of DOE’s Office of Energy Efficiency and Renewable Energy invest in research, development, demonstration, and deployment of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies. This report estimates the benefits of successfully developing and deploying these technologies (a “Program Success” case) relative to a base case (the “No Program” case). The Program Success case represents the future with completely successful deployment of Vehicle Technologies Office (VTO) and Fuel Cell Technologies Office (FCTO) technologies. The No Program case represents a future in which theremore » is no contribution after FY 2016 by the VTO or FCTO to these technologies. The benefits of advanced vehicle, hydrogen production, delivery and storage, and fuel cell technologies were estimated on the basis of differences in fuel use, primary energy use, and greenhouse gas (GHG) emissions from light-, medium- and heavy-duty vehicles, including energy and emissions from fuel production, between the base case and the Program Success case. Improvements in fuel economy of various vehicle types, growth in the stock of fuel cell vehicles and other advanced technology vehicles, and decreased GHG intensity of hydrogen production and delivery in the Program Success case over the No Program case were projected to result in savings in petroleum use and GHG emissions. Benefits were disaggregated by individual program technology areas, which included the FCTO program and the VTO subprograms of batteries and electric drives; advanced combustion engines; fuels and lubricants; materials (for reduction in vehicle mass, or “lightweighting”); and, for medium- and heavy-duty vehicles, reduction in rolling and aerodynamic resistance. Projections for the Program Success case indicate that by 2035, the average fuel economy of on-road, light-duty vehicle stock could be 47% to 76% higher than in the No Program case. On-road medium- and heavy-duty vehicle stock could be as much as 39% higher. The resulting petroleum savings in 2035 were estimated to be as high as 3.1 million barrels per day, and reductions in GHG emissions were estimated to be as high as 500 million metric tons of CO2 equivalent per year. The benefits of continuing to invest government resources in advanced vehicle and fuel cell technologies would have significant economic value in the U.S. transportation sector and reduce its dependency on oil and its vulnerability to oil price shocks.« less

NASA's PEM Fuel Cell Power Plant Development Program for Space Applications

NASA Technical Reports Server (NTRS)

Hoberecht, Mark A.

2008-01-01

A three-center NASA team led by the Glenn Research Center in Cleveland, Ohio is completing a five-year PEM fuel cell power plant development program for future space applications. The focus of the program has been to adapt commercial PEM fuel cell technology for space applications by addressing the key mission requirements of using pure oxygen as an oxidant and operating in a multi-gravity environment. Competing vendors developed breadboard units in the 1 to 5 kW power range during the first phase of the program, and a single vendor developed a nominal 10-kW engineering model power pant during the second phase of the program. Successful performance and environmental tests conducted by NASA established confidence that PEM fuel cell technology will be ready to meet the electrical power needs of future space missions.

Lean Gasoline System Development for Fuel Efficient Small Cars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Stuart R.

2013-11-25

The General Motors and DOE cooperative agreement program DE-EE0003379 is completed. The program has integrated and demonstrated a lean-stratified gasoline engine, a lean aftertreatment system, a 12V Stop/Start system and an Active Thermal Management system along with the necessary controls that significantly improves fuel efficiency for small cars. The fuel economy objective of an increase of 25% over a 2010 Chevrolet Malibu and the emission objective of EPA T2B2 compliance have been accomplished. A brief review of the program, summarized from the narrative is: The program accelerates development and synergistic integration of four cost competitive technologies to improve fuel economymore » of a light-duty vehicle by at least 25% while meeting Tier 2 Bin 2 emissions standards. These technologies can be broadly implemented across the U.S. light-duty vehicle product line between 2015 and 2025 and are compatible with future and renewable biofuels. The technologies in this program are: lean combustion, innovative passive selective catalyst reduction lean aftertreatment, 12V stop/start and active thermal management. The technologies will be calibrated in a 2010 Chevrolet Malibu mid-size sedan for final fuel economy demonstration.« less

A Study of Persistence in the Northeast State Community College Health-Related Programs of Study

NASA Astrophysics Data System (ADS)

Hamilton, Allana R.

2011-12-01

The purpose of the study was to identify factors that were positively associated with persistence to graduation by students who were admitted to Health-Related Programs leading to the degree associate of applied science at Northeast State Community College. The criterion variable in this study was persistence, which was categorized into two groups the persister group (program completers) and the nonpersister (program noncompleters) group. The predictor variables included gender, ethnic origin, first- (or nonfirst-) generation-student status, age, specific major program of study, number of remedial and/or developmental courses taken, grades in selected courses (human anatomy and physiology I and II, microbiology, probability and statistics, composition I, clinical I, clinical II), and number of mathematics and science credit hours earned prior to program admission. The data for this ex post facto nonexperimental design were located in Northeast State's student records database, Banner Information System. The subjects of the study were students who had been admitted into Health-Related Programs of study at a 2-year public community college between the years of 1999 and 2008. The population size was 761. Health-Related Programs of study included Dental Assisting, Cardiovascular Technology, Emergency Medical Technology -- Paramedic, Medical Laboratory Technology, Nursing, and Surgical Technology. A combination of descriptive and inferential statistics was used in the analysis of the data. Descriptive statistics included measures of central tendency, standard deviations, and percentages, as appropriate. Independent samples t-tests were used to determine if the mean of a variable on one group of subjects was different from the mean of the same variable with a different group of subjects. It was found that gender, ethnic origin, first-generation status, and age were not significantly associated with persistence to graduation. However, findings did reveal a statistically significant difference in persistence rates among the specific Health-Related Programs of study. Academic data including grades in human anatomy and physiology I, probability and statistics, and composition I, suggested a relationship between the course grade and persistence to graduation. Findings also revealed a relationship between the number of math and science courses completed and students' persistence to graduation.

Power-by-Wire Development and Demonstration for Subsonic Civil Transport

NASA Technical Reports Server (NTRS)

1996-01-01

During the last decade, three significant studies by the Lockheed Martin Corporation, the NASA Lewis Research Center, and McDonnell Douglas Corporation have clearly shown operational, weight, and cost advantages for commercial subsonic transport aircraft that use all-electric or more-electric technologies in the secondary electric power systems. Even though these studies were completed on different aircraft, used different criteria, and applied a variety of technologies, all three have shown large benefits to the aircraft industry and to the nation's competitive position. The Power-by-Wire (PBW) program is part of the highly reliable Fly-By-Light/Power-By-Wire (FBL/PBW) Technology Program, whose goal is to develop the technology base for confident application of integrated FBL/PBW systems for transport aircraft. This program is part of the NASA aeronautics strategic thrust in subsonic aircraft/national airspace (Thrust 1) to "develop selected high-leverage technologies and explore new means to ensure the competitiveness of U.S. subsonic aircraft and to enhance the safety and productivity of the national aviation system" (The Aeronautics Strategic Plan). Specifically, this program is an initiative under Thrust 1, Key Objective 2, to "develop, in cooperation with U.S. industry, selected high-payoff technologies that can enable significant improvements in aircraft efficiency and cost."

A Virtual Patient Software Program to Improve Pharmacy Student Learning in a Comprehensive Disease Management Course

PubMed Central

Casale, Jillian P.; Skirvin, J. Andrew; DiVall, Margarita V.

2013-01-01

Objective. To implement and assess the impact of a virtual patient pilot program on pharmacy students’ clinical competence skills. Design. Pharmacy students completed interactive software-based patient case scenarios embedded with drug-therapy problems as part of a course requirement at the end of their third year. Assessment. Assessments included drug-therapy problem competency achievement, performance on a pretest and posttest, and pilot evaluation survey instrument. Significant improvements in students’ posttest scores demonstrated advancement of clinical skills involving drug-therapy problem solving. Students agreed that completing the pilot program improved their chronic disease management skills and the program summarized the course series well. Conclusion. Using virtual patient technology allowed for assessment of student competencies and improved learning outcomes. PMID:24159213

ETX-I: First-generation single-shaft electric propulsion system program. Volume 2: Battery

NASA Astrophysics Data System (ADS)

1988-06-01

The overall objective of this research and development program was to advance ac powertrain technology for electric vehicles (EV). The program focused on the design, build, test, and refinement of an experimental advanced electric vehicle powertrain suitable for packaging in a Ford Escort or equivalent-size vehicle. A Mercury LN7 was subsequently selected for the test bed vehicle. Although not part of the initial contract, the scope of the ETX-I Program was expanded in 1983 to encompass the development of advanced electric vehicle batteries compatible with the ETX-I powertrain and vehicle test bed. The intent of the battery portion of the ETX-I Program was to apply the best available battery technology based on existing battery developments. The battery effort was expected to result in a practical scale-up of base battery technologies to the vehicle battery subsystem level. With the addition of the battery activity, the ETX-I Program became a complete proof-of-concept ac propulsion system technology development program. In this context, the term propulsion system is defined as all components and subsystems (from the driver input to the vehicle wheels) that are required to store energy on board the vehicle and, using that energy, to provide controlled motive power to the vehicle. This report, Volume 2, describes the battery portion of the ETX-I Program. The powertrain effort is reported in Volume 1.

Pollution reduction technologies being applied to small coal-fired boiler systems in Poland

DOE Office of Scientific and Technical Information (OSTI.GOV)

Markussen, J.M.; Gyorke, D.F.

1997-12-31

To help in alleviating air pollution problems in Poland, various US environmental technologies are being installed in the city of Krakow to reduce emissions from short-stack coal- and coke-fired boilers. Introduction of low-cost, effective US pollution abatement and energy efficiency technologies is being completed through the US-Polish Krakow Clean Fossil Fuels and Energy Efficiency Program. Seven US firms are currently participating in the program; five projects are well under way and two are in the design phase. The technologies being applied in Krakow include modern district heating equipment and controls, coal preparation techniques, micronized coal combustion, automatic combustion controls, andmore » high-efficiency particulate control equipment. These technologies will be discussed along with pollutant reduction results obtained to date. Applications of these technologies are providing some efficient and economical answers to Krakow`s severe air pollution problems. Certainly, these technologies could be equally effective in many industrial cities throughout the world with similar air pollution concerns.« less

Goal orientation and its relationship to academic success in a laptop-based BScN program.

PubMed

Goldsworthy, Sandra J; Goodman, Bill; Muirhead, Bill

2005-01-01

This longitudinal study, conducted within a laptop-based BScN program examines the relationship of goal orientation profiles to comfort with technology and academic success. In phase 1 of this study, 101 first year nursing students completed an on line survey. The measurement tools used were Goal Orientation Assessment, Multiple Intelligences Learning Inventory and a locally developed Technology Comfort survey. Results showed that students were predominantly high in the mastery goal orientation profile. Males had a higher comfort level with technology. Age was inversely related to comfort with technology. An unexpected finding was that grade point average was inversely related to comfort with use of technology. The data did not support the commonly held belief that today's students are uniformly well-skilled and comfortable with new technologies. This study will continue over the next three years and will allow comparison of variables over time. Specific teaching interventions may be developed to accommodate varying learning and motivational styles in relation to comfort with technology.

Logging while fishing: An alternate method to cut and thread fishing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tollefsen, E.; Crary, S.; Flores, B.

1996-12-31

New technology has been introduced to allow completion of the wireline logging program after the tool string has become lodged in the wellbore. Charges associated with extracting a stuck tool are substantial. These charges result from the nonproductive time during the fishing trip, an associated wiper trip, and re-logging the well. The ability to continue the logging program while retrieving the logging string from the wellbore is needed. Logging While Fishing (LWF) is a hybrid of existing technologies combined with a new sub capable of severing a cable remotely. This new method is comprised of cut and thread fishing, drillpipemore » conveyed logging, and bridled tool techniques. Utilizing these techniques it is possible to complete wireline logging operations while removing a stuck tool from the wellbore. Completing logging operations using this hybrid method will save operating companies time and money. Other benefits, depending on the situation, include reduced fishing time and an increased level of safety. This application has been demonstrated on jobs in the Gulf of Mexico, North Sea, Venezuela, and Southeast Asia.« less

An Analysis of Retention Factors in Undergraduate Degree Programs in Science, Technology, Engineering, and Mathematics

ERIC Educational Resources Information Center

Johnson, Michael H.

2012-01-01

This mixed-methodological study explored the factors that predict a student's likelihood to complete an undergraduate program in a STEM discipline at one campus reliant upon that mission. Offered in response to a national imperative for the U.S. to compete globally, researchers contend educators must better prepare a STEM foundation and inspire…

High Pressure Earth Storable Rocket Technology Program-Hipes Options 1/2 Report

NASA Technical Reports Server (NTRS)

Chazen, M. L.; Sicher, D.; Calvignac, J.; Ono, D.

1999-01-01

Under the High Pressure Earth Storable Rocket Technology (HIPES) Program, TRW successfully completed testing of two 100 lbf thrust class rhenium chambers using N204-MMH. The first chamber was successfully fired for 4789 seconds of operating time with a maximum duration of 700 seconds. This chamber had been previously fired for 5230 seconds with N2O4-N2H4. The second chamber was successfully fired for 8085 seconds with a maximum firing duration of 1200 seconds. The Isp (specific impulse) for both chambers ranged from 323 lbf-sec/lbm to 330 lbf-sec/lbm.

Report on research and technology-FY 1981

NASA Technical Reports Server (NTRS)

1981-01-01

More than 65 technical reports, papers, and articles published by personnel and contractors at the Dryden Flight Research Center are listed. Activities performed for the Offices of Aeronautics and Space Technology, Space and Terrestrial Applications, Space Transportation Systems, and Space Tracking and Data Systems are summarized. Preliminary stability and control derivatives were determined for the shuttle orbiter at hypersonic speeds from the data obtained at reentry. The shuttle tile tests, spin research vehicle nose shapes flight investigations, envelope expansion flights for the Ames tilt rotor research aircraft, and the AD-1 oblique wing programs were completed as well as the KC-135 winglet program.

Modular Rocket Engine Control Software (MRECS)

NASA Technical Reports Server (NTRS)

Tarrant, C.; Crook, J.

1998-01-01

The Modular Rocket Engine Control Software (MRECS) Program is a technology demonstration effort designed to advance the state-of-the-art in launch vehicle propulsion systems. Its emphasis is on developing and demonstrating a modular software architecture for advanced engine control systems that will result in lower software maintenance (operations) costs. It effectively accommodates software requirement changes that occur due to hardware technology upgrades and engine development testing. Ground rules directed by MSFC were to optimize modularity and implement the software in the Ada programming language. MRECS system software and the software development environment utilize Commercial-Off-the-Shelf (COTS) products. This paper presents the objectives, benefits, and status of the program. The software architecture, design, and development environment are described. MRECS tasks are defined and timing relationships given. Major accomplishments are listed. MRECS offers benefits to a wide variety of advanced technology programs in the areas of modular software architecture, reuse software, and reduced software reverification time related to software changes. MRECS was recently modified to support a Space Shuttle Main Engine (SSME) hot-fire test. Cold Flow and Flight Readiness Testing were completed before the test was cancelled. Currently, the program is focused on supporting NASA MSFC in accomplishing development testing of the Fastrac Engine, part of NASA's Low Cost Technologies (LCT) Program. MRECS will be used for all engine development testing.

Structural technology challenges for evolutionary growth of Space Station Freedom

NASA Technical Reports Server (NTRS)

Doiron, Harold H.

1990-01-01

A proposed evolutionary growth scenario for Space Station Freedom was defined recently by a NASA task force created to study requirements for a Human Exploration Initiative. The study was an initial response to President Bush's July 20, 1989 proposal to begin a long range program of human exploration of space including a permanently manned lunar base and a manned mission to Mars. This growth scenario evolves Freedom into a critical transportation node to support lunar and Mars missions. The growth scenario begins with the Assembly Complete configuration and adds structure, power, and facilities to support a Lunar Transfer Vehicle (LTV) verification flight. Evolutionary growth continues to support expendable, then reusable LTV operations, and finally, LTV and Mars Transfer Vehicle (MTV) operations. The significant structural growth and additional operations creating new loading conditions will present new technological and structural design challenges in addition to the considerable technology requirements of the baseline Space Station Freedom program. Several structural design and technology issues of the baseline program are reviewed and related technology development required by the growth scenario is identified.

Technician and technologist photonics teaching: an Ontario success story

NASA Astrophysics Data System (ADS)

Yatulis, Jay; Beda, Johann; Casey, Peter J.; Chebbi, Brahim; Finnagan, Steve; Grevatt, Treena; McGlashan, Alexander; Nantel, Marc; Tiberi, Leo

2004-10-01

Launched in 2001, the Ontario Photonics Education and Training project (PET) has established an completely new Photonics Engineering Technician (2 years) and Photonics Engineering Technologist (3 years) programs at Niagara and Algonquin Colleges. The programs have now completed a full academic cycle at both colleges. This paper will review the history of the program, its collaborators, and industry climate changes. This paper will present recruitment statistics, which will include percentage uptake, student retention, and profiles of the student group. The first year"s intake was characterized by high achieving 'early adopters', including those with non-technical backgrounds and University converts. Lessons learned from recruitment and high school outreach activities will be discussed. We observe that 'photonics' is not a term recognized by the populace at large. An improved public understanding of the pervasive nature of electro-optic technologies in everyday life is desired. Curriculum highlights, recommendations; and the evolution of our facilities will be discussed. We will review employment and destination statistics of our graduates. Challenges for the future will be addressed, including the need for greater program visibility amongst regional photonics employers. In summary, the PET program has created an optics specialist with a practical skill-set that will fill the expertise gap that exists in traditional and non-traditional consumers of optical technologies.

NSF Programs That Support Research in the Two-Year College Classroom

NASA Astrophysics Data System (ADS)

Carter, V.; Ryan, J. G.; Singer, J.

2011-12-01

The National Science Foundation recognizes the significant role provided by two-year institutions in providing high quality STEM courses to large numbers of students. For some students the STEM courses completed while attending a two-year institution represent the only STEM courses a student may take; for others the courses serve as the foundation to continue on into a STEM major at a four-year institution; and some students complete STEM courses that lead directly into the workforce. Several programs in the Division of Undergraduate Research, including the Advanced Technological Education (ATE) program, STEM Talent Expansion Program (STEP), and the Transforming Undergraduate Education in STEM (TUES) program, support the inclusion of student research experiences at two-year institutions. Information about these programs and examples of successful funded projects will be provided. Resources for faculty considering applying for support will be shared with special attention to a faculty development program designed to help faculty learn about funding opportunities and prepare proposals for submission to the TUES and ATE programs.

Status of the Advanced Mirror Technology Development (AMTD) Phase 2, 1.5m ULE(Registered Trademark) Mirror

NASA Technical Reports Server (NTRS)

Egerman, Robert; Matthews, Gary W.; Johnson, Matthew; Ferland, Albert; Stahl, H. Philip; Eng, Ron; Effinger, Michael R.

2015-01-01

The Decadal Survey stated that an advanced large-aperture ultraviolet, optical, near-infrared (UVOIR) telescope is required to enable the next generation of compelling astrophysics and exoplanet science; and, that present technology is not mature enough to affordably build and launch any potential UVOIR mission concept. Under Science and Technology funding, NASA's Marshall Space Flight Center (MSFC) and Exelis have developed a more cost effective process to make up to 4m monolithic spaceflight UV quality, low areal density, thermally and dynamically stable primary mirrors. Under a Phase I program, a proof of concept mirror was completed at Exelis and tested down to 250K at MSFC which would allow imaging out to 2.5 microns. In 2014, Exelis and NASA started a Phase II program to design and build a 1.5m mirror to demonstrate lateral scalability to a 4m monolithic primary mirror. The current status of the Phase II development program will be provided along with a Phase II program summary.

The NASA Langley building solar project and the supporting Lewis solar technology program

NASA Technical Reports Server (NTRS)

Ragsdale, R. G.; Namkoong, D.

1974-01-01

The use of solar energy to heat and cool a new office building that is now under construction is reported. Planned for completion in December 1975, the 53,000 square foot, single story building will utilize 15,000 square feet of various types of solar collectors in a test bed to provide nearly all of the heating demand and over half of the air conditioning demand. Drawing on its space-program-developed skills and resources in heat transfer, materials, and systems studies, NASA-Lewis will provide technology support for the Langley building project. A solar energy technology program underway at Lewis includes solar collector testing in an indoor solar simulator facility and in an outdoor test facility, property measurements of solar panel coatings, and operation of a laboratory-scale solar model system test facility. Based on results obtained in this program, NASA-Lewis will select and procure the solar collectors for the Langley test bed.

Institute of Educational Technology. Series List. Reports and Papers Produced in Series 1969-1991. A Companion to "The Institute Bibliography."

ERIC Educational Resources Information Center

Whitehead, Don J., Comp.

Compiled to make available details of reports which contain the record of work by the research groups of the Open University's Institute of Educational Technology, this list is divided into two sections: (1) Completed Series; and (2) Current Series. Within each section the lists are placed in alphabetical order by program and, where known, the…

A Case Study for Evaluating the Diffusion of Computing Technology in Teaching Undergraduates by a Faculty in a Journalism and Mass Communication Program.

ERIC Educational Resources Information Center

Terry, Janet L.; Geske, Joel

A case study investigated how journalism and mass communication faculty members diffused and used computing technology in teaching. Subjects, 21 tenured and tenure-track faculty members in a mid-sized journalism and mass communication department, completed an indepth questionnaire designed to measure the general attitude of the faculty towards…

Curriculum Guide, C.E.I.T.--Ninth Grade, Transportation Technology. Point Pleasant Junior High School, Point Pleasant, West Virginia, 1977-1978.

ERIC Educational Resources Information Center

Kleine, Richard E.; Hamme, Randall

The result of a curriculum development project known as Project Open, this curriculum guide offers an elective course on transportation systems for ninth graders who are participating in the Career Exploration in Technology (CEIT) program and who have completed the eighth-grade course on manufacturing systems. The course, which spans two…

Report of the Defense Science Board Task Force on National Aero-Space Plane (NASP) Program

NASA Technical Reports Server (NTRS)

1992-01-01

Six years ago, the Defense Science Board (DSB) initiated a review of the concept, technical basis, program content, and missions of the National Aerospace Plane (NASP) program. The report was completed in Sep. 1988, and the recommendations contributed to strengthening the technical efforts in the NASP program. Since then, substantial technological progress has been made in the technology development phase (Phase 2) of the program. Phase 2 of the program is currently scheduled to end in late Fiscal Year 1993, with a decision whether to proceed to the experimental flight vehicle phase (Phase 3) to be made at that time. This decision will be a very significant one for the Department of Defense (DoD) and the National Aeronautics and Space Administration (NASA). In February of this year, the DSB was chartered to revisit the NASP program to assess the degree to which the many technical challenges of the program have been resolved, or are likely to be resolved by the end of Phase 2.

Gap analysis survey: an aid in transitioning to standardized curricula for nuclear medicine technology.

PubMed

Bires, Angela Macci; Mason, Donna L; Gilmore, David; Pietrzyk, Carly

2012-09-01

This article discusses the process by which the Society of Nuclear Medicine Technology Section (SNMTS) is assisting educators as they transition to comply with the fourth edition of the Curriculum Guide for Educational Programs in Nuclear Medicine Technology. An electronic survey was sent to a list of nuclear medicine technology programs compiled by the educational division of the SNMTS. The collected data included committee member demographics, goals and objectives, conference call minutes, consultation discussions, transition examples, 4- and 2-y program curricula, and certificate program curricula. There were 56 responses to the survey. All respondents were program directors, with 3 respondents having more than one type of program, for a total of 59 programs. Of these, 19 (33.93%) were baccalaureate, 19 (28.57%) associate, and 21 (37.5%) certificate. Forty-eight respondents (85.71%) had accreditation through the Joint Review Commission on Educational Programs in Nuclear Medicine Technology, 6 (10.71%) had regional accreditation, and 2 (3.57%) were accredited through other entities. Thirteen categories of required general education courses were identified, and the existing program curricula of 9 (69.2%) courses were more than 50% compliant with the fourth edition Curriculum Guide. The fact that no measurable gap could be found within the didactic professional content across programs was due to the lack of a degree requirement and content standardization within the profession. The data indicated that the participating programs offer a minimum of 1-15 contact hours in emerging technology modalities. The required clinical hours ranged from 765 to 1,920 for degree or certificate completion. The average number of clinical hours required for all programs was 1,331.69. Standardization of the number and types of courses is needed both for current baccalaureate programs and for clinical education. This standardization will guide programs in transitioning from a certificate or associate level to the baccalaureate level. The greatest obstacle is in expanding curricula to meet the recommendations of the fourth edition Curriculum Guide. Such expansion to entry-level competency may be met by incorporating hybrid imaging courses, secondary-level courses, and equivalency courses on the basic sciences and emerging technologies.

Small transport aircraft technology

NASA Technical Reports Server (NTRS)

Williams, L. J.

1983-01-01

Information on commuter airline trends and aircraft developments is provided to upgrade the preliminary findings of a NASA-formed small transport aircraft technology (STAT) team, established to determine whether the agency's research and development programs could help commuter aircraft manufacturers solve technical problems related to passenger acceptance and use of 19- to 50-passenger aircraft. The results and conclusions of the full set of completed STAT studies are presented. These studies were performed by five airplane manufacturers, five engine manufacturers, and two propeller manufacturers. Those portions of NASA's overall aeronautics research and development programs which are applicable to commuter aircraft design are summarized. Areas of technology that might beneficially be expanded or initiated to aid the US commuter aircraft manufacturers in the evolution of improved aircraft for the market are suggested.

Demonstrating a Total Transit Solution for Fuel Cell Electric Buses in Boston

DOT National Transportation Integrated Search

2017-05-01

The Federal Transit Administrations (FTA) National Fuel Cell Bus Program (NFCBP) focuses on developing commercially viable fuel cell bus technologies. Nuvera is leading the Massachusetts Fuel Cell Bus project to demonstrate a complete transit solu...

Outcomes and Processes in the Meyerhoff Scholars Program: STEM PhD Completion, Sense of Community, Perceived Program Benefit, Science Identity, and Research Self-Efficacy

PubMed Central

Maton, Kenneth I.; Beason, Tiffany S.; Godsay, Surbhi; Sto. Domingo, Mariano R.; Bailey, TaShara C.; Sun, Shuyan; Hrabowski, Freeman A.

2016-01-01

Previous research has shown that the Meyerhoff Scholars Program at the University of Maryland, Baltimore County, is an effective intervention for high-achieving underrepresented minority (URM) students; African-American Meyerhoff students are significantly more likely to enter science, technology, engineering, and mathematics (STEM) PhD programs than comparison students. The first of two studies in this report extends the prior research by examining levels of PhD completion for Meyerhoff (N = 479) versus comparison sample (N = 249) students among the first 16 cohorts. Entering African-American Meyerhoff students were 4.8 times more likely to complete STEM PhDs than comparison sample students. To enhance understanding of potential mechanisms of influence, the second study used data from the 22nd (Fall 2010) to 25th (Fall 2013) cohorts (N = 109) to test the hypothesis that perceived program benefit at the end of freshman year would mediate the relationship between sense of community at the end of Summer Bridge and science identity and research self-efficacy at the end of sophomore year. Study 2 results indicated that perceived program benefit fully mediated the relationship between sense of community and both criterion measures. The findings underscore the potential of comprehensive STEM intervention programs to enhance PhD completion, and suggest mechanisms of influence. PMID:27587857

An educational video program to increase aging services technology awareness among older adults.

PubMed

Tam, Joyce W; Van Son, Catherine; Dyck, Dennis; Schmitter-Edgecombe, Maureen

2017-08-01

Aging services technologies (ASTs), health technology that meets the needs of seniors, are being underutilized due to a lack of awareness. This study evaluated a video-based educational program to increase AST awareness. Two hundred and thirty-one older adults completed AST measures pre- and post-program. Participants endorsed significantly improved AST knowledge and attitude and a lower level of perceived stigma post-program. Hierarchical regression analyses showed that a greater reduction in stigma post-program and a higher number of physical/cognitive needs supported by ASTs at baseline were significant predictors of a greater increase in expressed intention to use ASTs following the video program. Furthermore, individuals living in their own homes, with a lower level of education, fewer physical and/or cognitive needs supported by ASTs at baseline, and greater functional limitations were found to be more likely to report a significant reduction in perceived stigma post-program. Four-week follow-up data from 75 individuals showed stable program gains. Program feedback was positive. The current findings provide support for the utility of the AST videos. The educational materials used in this study can be used clinically or for public health education to increase awareness and adoption of ASTs. Copyright © 2017 Elsevier B.V. All rights reserved.

An overview of DARPA's advanced space technology program

NASA Astrophysics Data System (ADS)

Nicastri, E.; Dodd, J.

1993-02-01

The Defense Advanced Research Projects Agency (DARPA) is the central research and development organization of the DoD and, as such, has the primary responsibility for the maintenance of U.S. technological superiority over potential adversaries. DARPA's programs focus on technology development and proof-of-concept demonstrations of both evolutionary and revolutionary approaches for improved strategic, conventional, rapid deployment and sea power forces, and on the scientific investigation into advanced basic technologies of the future. DARPA can move quickly to exploit new ideas and concepts by working directly with industry and universities. For four years, DARPA's Advanced Space Technology Program (ASTP) has addressed various ways to improve the performance of small satellites and launch vehicles. The advanced technologies that are being and will be developed by DARPA for small satellites can be used just as easily on large satellites. The primary objective of the ASTP is to enhance support to operational commanders by developing and applying advanced technologies that will provide cost-effective, timely, flexible, and responsive space systems. Fundamental to the ASTP effort is finding new ways to do business with the goal of quickly inserting new technologies into DoD space systems while reducing cost. In our view, these methods are prime examples of what may be termed 'technology leveraging.' The ASTP has initiated over 50 technology projects, many of which were completed and transitioned to users. The objectives are to quickly qualify these higher risk technologies for use on future programs and reduce the risk of inserting these technologies into major systems, and to provide the miniaturized systems that would enable smaller satellites to have significant - rather than limited - capability. Only a few of the advanced technologies are described, the majority of which are applicable to both large and small satellites.

Sleep technologists educational needs assessment: a survey of polysomnography, electroneurodiagnostic technology, and respiratory therapy education program directors.

PubMed

Wells, Mary Ellen; Vaughn, Bradley V

2013-10-15

In this study, we assessed the community and educational needs for sleep technologists by surveying program directors of nationally accredited polysomnography, electroneurodiagnostic technology, and respiratory care educational programs. Currently, little is known about our educational capacity and the need for advanced degrees for sleep medicine technical support. A questionnaire was developed about current and future community and educational needs for sleep technologists. The questionnaire was sent to directors of CAAHEP-accredited polysomnography and electroneurodiagnostic technology programs (associate degree and certificate programs), and directors of CoARC-accredited respiratory therapy associate degree and bachelor degree programs (n = 358). Qualitative and quantitative data were collected via an internet survey tool. Data analysis was conducted with the IBM SPSS statistical package and included calculating means and standard deviations of the frequency of responses. Qualitative data was analyzed and classified based on emerging themes. One hundred seven of 408 program directors completed the survey. Seventy-four percent agreed that demand for qualified sleep technologists will increase, yet 50% of those surveyed believe there are not enough educational programs to meet the demand. Seventy-eight percent of those surveyed agreed that the educational requirements for sleep technologists will soon increase; 79% of those surveyed believe sleep centers have a need for technologists with advanced training or specialization. Our study shows educators of associate and certificate degree programs believe there is a need for a bachelor's degree in sleep science and technology.

The State and Sustainability of Telepsychiatry Programs.

PubMed

Lauckner, Carolyn; Whitten, Pamela

2016-04-01

Telepsychiatry, or the provision of psychiatric care across a distance using communication technologies, has become widespread and has been used successfully for treating a variety of mental illnesses. Little is known, however, about the sustainability of telepsychiatry programs and their long-term success. The goal of this study was to determine current trends in telepsychiatry by completing an extensive literature review and to follow-up with the authors of telepsychiatry research to examine the current status of their programs and success factors or barriers associated with their experiences. Results indicated that modern telepsychiatry programs often target veteran/military or child populations and that many rely on either federal or internal funding. Interestingly, several researchers indicated that they wished to improve current funding mechanisms, while others wished for improvements in the technology used. Implications of these findings for behavioral health researchers are discussed, along with suggestions for improving future telepsychiatry programs.

A bootstrap lunar base: Preliminary design review 2

NASA Technical Reports Server (NTRS)

1987-01-01

A bootstrap lunar base is the gateway to manned solar system exploration and requires new ideas and new designs on the cutting edge of technology. A preliminary design for a Bootstrap Lunar Base, the second provided by this contractor, is presented. An overview of the work completed is discussed as well as the technical, management, and cost strategies to complete the program requirements. The lunar base design stresses the transforming capabilities of its lander vehicles to aid in base construction. The design also emphasizes modularity and expandability in the base configuration to support the long-term goals of scientific research and profitable lunar resource exploitation. To successfully construct, develop, and inhabit a permanent lunar base, however, several technological advancements must first be realized. Some of these technological advancements are also discussed.

Status of NASA's Stirling Space Power Converter Program

NASA Technical Reports Server (NTRS)

Dudenhoefer, James E.; Winter, Jerry M.

1991-01-01

An overview is presented of the NASA-Lewis Free-Piston Stirling Space Power Convertor Technology Program. The goal is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space initiatives. Efforts are focused upon increasing system power output and system thermal and electric energy conversion efficiency at least fivefold over current SP-100 technology, and on achieving systems that are compatible with space nuclear reactors. Stirling experience in space and progress toward 1050 and 1300 K Stirling Space Power Converters is discussed. Fabrication is nearly completed for the 1050 K Component Test Power Converters (CTPC); results of motoring tests of cold end (525 K), are presented. The success of these and future designs is dependent upon supporting research and technology efforts including heat pipes, bearings, superalloy joining technologies, high efficiency alternators, life and reliability testing and predictive methodologies. An update is provided of progress in some of these technologies leading off with a discussion of free-piston Stirling experience in space.

SOLTECH 1992 proceedings: Solar Process Heat Program, volume 1

NASA Astrophysics Data System (ADS)

1992-03-01

This document is a limited Proceedings, documenting the presentations given at the symposia conducted by the U.S. Department of Energy's (DOE) Solar Industrial Program and Solar Thermal Electrical Program at SOLTECH92. The SOLTECH92 national solar energy conference was held in Albuquerque, New Mexico during the period February 17-20, 1992. The National Renewable Energy Laboratory manages the Solar Industrial Program; Sandia National Laboratories (Albuquerque) manages the Solar Thermal Electric Program. The symposia sessions were as follows: (1) Solar Industrial Program and Solar Thermal Electric Program Overviews, (2) Solar Process Heat Applications, (3) Solar Decontamination of Water and Soil, (4) Solar Building Technologies, (5) Solar Thermal Electric Systems, and (6) Photovoltaic (PV) Applications and Technologies. For each presentation given in these symposia, these Proceedings provide a one- to two-page abstract and copies of the viewgraphs and/or 35 mm slides utilized by the speaker. Some speakers provided additional materials in the interest of completeness. The materials presented in this document were not subjected to a peer review process.

Technology Readiness Level Assessment Process as Applied to NASA Earth Science Missions

NASA Technical Reports Server (NTRS)

Leete, Stephen J.; Romero, Raul A.; Dempsey, James A.; Carey, John P.; Cline, Helmut P.; Lively, Carey F.

2015-01-01

Technology assessments of fourteen science instruments were conducted within NASA using the NASA Technology Readiness Level (TRL) Metric. The instruments were part of three NASA Earth Science Decadal Survey missions in pre-formulation. The Earth Systematic Missions Program (ESMP) Systems Engineering Working Group (SEWG), composed of members of three NASA Centers, provided a newly modified electronic workbook to be completed, with instructions. Each instrument development team performed an internal assessment of its technology status, prepared an overview of its instrument, and completed the workbook with the results of its assessment. A team from the ESMP SEWG met with each instrument team and provided feedback. The instrument teams then reported through the Program Scientist for their respective missions to NASA's Earth Science Division (ESD) on technology readiness, taking the SEWG input into account. The instruments were found to have a range of TRL from 4 to 7. Lessons Learned are presented; however, due to the competition-sensitive nature of the assessments, the results for specific missions are not presented. The assessments were generally successful, and produced useful results for the agency. The SEWG team identified a number of potential improvements to the process. Particular focus was on ensuring traceability to guiding NASA documents, including the NASA Systems Engineering Handbook. The TRL Workbook has been substantially modified, and the revised workbook is described.

STEM as "Minority": A Phenomenological Case Study of How Students of Color Perceive Their Experience in a STEM Living-Learning Program

ERIC Educational Resources Information Center

Sriram, Rishi; Diaz, Crystal

2016-01-01

The future of the U.S. scientific workforce depends on graduating college students in science, technology, engineering, and math (STEM) fields. The completion rate of STEM students is a national concern, especially among students of color. This qualitative study examines the experiences of students of color in a living-learning program for STEM…

Results from Alouette 1, Explorer 20, Alouette 2, and Explorer 31

NASA Technical Reports Server (NTRS)

Jackson, John E.

1988-01-01

This is a continuation of the Alouette-Isis Program Summary of 1986. Not only included is a description of the objectives, spacecraft, experiments, and flight performance, but also a complete experiment related bibliography along with a comprehensive assessment of the technological and scientific accomplishments. The scientific results are presented from the first four of the six spacecraft of the Alouette-Isis program.

Evaluation of Emerging Technologies for Traffic Crash Reporting

DOT National Transportation Integrated Search

1998-02-01

A traffic accident records system is a necessity for a cost-effective safety program at any level of government. The more complete the system, the more potential exists for the application of scarce resources to those accident countermeasures that wi...

The Great Observatories Origins Deep Survey (GOODS) Spitzer Legacy Science Program

NASA Astrophysics Data System (ADS)

Dickinson, M.; GOODS Team

2004-12-01

The Great Observatories Origins Deep Survey (GOODS) is an anthology of observing programs that are creating a rich, public, multiwavelength data set for studying galaxy formation and evolution. GOODS is observing two fields, one in each hemisphere, with extremely deep imaging and spectroscopy using the most powerful telescopes in space and on the ground. The GOODS Spitzer Legacy Science Program completes the trio of observations from NASA's Great Observatories, joining already-completed GOODS data from Chandra and Hubble. Barring unforeseen difficulties, the GOODS Spitzer observing program will have been completed by the end of 2004, and the first data products will have been released to the astronomical community. In this Special Oral Session, and in an accompanying poster session, the GOODS team presents early scientific results from this Spitzer Legacy program, as well as new research based on other GOODS data sets. I will introduce the session with a brief description of the Legacy observations and data set. Support for this work, part of the Spitzer Space Telescope Legacy Science Program, was provided by NASA through Contract Number 1224666 issued by the Jet Propulsion Laboratory, California Institute of Technology under NASA contract 1407.

Rotorcraft flight-propulsion control integration

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. G. C.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories have initiated and completed, in part, a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the T700 and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

Tracing Impacts of Science and Technology Development

NASA Astrophysics Data System (ADS)

Powell, Jeanne

2003-03-01

ATP's Mission and Operations. The ATP partners with industry to accelerate the development of innovative technologies for broad national economic benefit. The program's focus is on co-funding collaborative, multi-disciplinary technologies and enabling technology platforms that appear likely to be commercialized, with private sector funding, once the high technical risks are reduced. Industry-led projects are selected for funding in rigorous competitions on the basis of technical and economic merit. Since 1990, ATP has co-funded 642 projects, with 1,329 participants and another 1,300 subcontractors. Measuring to Mission: Overview of ATP's Evaluation Program. ATP's multi-component evaluation strategy provides measures of progress and performance matched to the stage of project evolution; i.e., for the short-term, from the time of project selection and over the course of the R for the mid-term, as commercial applications are pursued, early products reach the market, and dissemination of knowledge created in the R projects occurs; and for the longer-term, as more fully-developed technologies diffuse across multiple products and industries. The approach is applicable to all public S programs and adaptable to private or university projects ranging from basic research to applied industrial R. Examples of Results. ATP's composite performance rating system assesses ATP's completed projects against multi-faceted performance criteria of Knowledge Creation and Dissemination and Commercialization Progress 2-3 years after the end of ATP-funded R. It generates scores ranging from zero to four stars. Results for ATP's first 50 completed projects show that 16are in the bottom group of zero or one stars. 60the middle group. It is understood that not all ATP projects will be successful given the program's emphasis on funding high-risk technology development that the private sector is unwilling and unable to fund alone. Different technologies have different timelines for commercialization and diffusion. ATP has contracted a number of in-depth case studies of individual projects and groups of related projects. Given that the full timeline for economic impact extends many years after ATP funding ends, some studies are prospective, and others are retrospective. Some are a mix of the two. Quantitative economic impacts from just a few or the projects funded to date provide strong evidence that the ATP is addressing its ultimate goal of broad economic benefits to the nation and generating value that vastly exceeds the cost of the program to date.

Translations on USSR Science and Technology, Biomedical and Behavioral Sciences, Number 19

DTIC Science & Technology

1978-01-12

a rule, re- ceived high ratings from Soviet specialists, In the very near future construction will be completed on a 1,000- bed...framework of the cooperative program in medical technology. One can but enumerate some of them. There are: a number of pieces of physical- therapy ...diagnosis and treatment. Now new medical apparatus is being worked out in the CMEA countries on a large

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, D.R.

The purpose of the Heavy Vehicle Propulsion System Materials Program is the development of materials: ceramics, intermetallics, metal alloys, and metal and ceramic coatings, to support the dieselization of class 1--3 trucks to realize a 35{percent} fuel-economy improvement over current gasoline-fueled trucks and to support commercialization of fuel-flexible LE-55 low-emissions, high-efficiency diesel engines for class 7--8 trucks. The Office of Transportation Technologies, Office of Heavy Vehicle Technologies (OTT OHVT) has an active program to develop the technology for advanced LE-55 diesel engines with 55{percent} efficiency and low emissions levels of 2.0 g/bhp-h NO{sub x} and 0.05 g/bhp-h particulates. The goalmore » is also for the LE-55 engine to run on natural gas with efficiency approaching that of diesel fuel. The LE-55 program is being completed in FY 1997 and, after approximately 10 years of effort, has largely met the program goals of 55{percent} efficiency and low emissions. However, the commercialization of the LE-55 technology requires more durable materials than those that have been used to demonstrate the goals. Heavy Vehicle Propulsion System Materials will, in concert with the heavy-duty diesel engine companies, develop the durable materials required to commercialize the LE-55 technologies.« less

CFRP composite optical telescope assembly for the 1 m ULTRA project

NASA Astrophysics Data System (ADS)

Martin, Robert N.; Romeo, Robert C.

2006-06-01

The focus of the ULTRA Project is to develop and test Ultra-Lightweight Technology for Research applications in Astronomy. The ULTRA project is a collaborative effort involving the private firm Composite Mirror Applications, Inc (CMA) and 3 universities: University of Kansas, San Diego State University, and Dartmouth College. Funding for ULTRA is predominately from a NSF three year MRI program grant to CMA and KU with additional support from CMA, KU and SDSU. The goal of the ULTRA program is to demonstrate that a viable alternative exists to traditional glass mirror and steel telescope technology by designing, fabricating and testing a research telescope constructed from carbon fiber reinforced plastic (CFRP) materials. In particular, a 1m diameter, Cassegrain telescope optics set and optical tube assembly (OTA) are being designed and fabricated by CMA. The completed telescope will be deployed at SDSU's Mt Laguna Observatory in a refurbished structure (new dome and mount provided via KU and SDSU). We expect that a successful completion and testing of this project will lead to future use of CFRP technology in larger telescopes and segmented telescopes. This paper describes the OTA (optical tube assembly) that has been developed for the ULTRA project. The mirror technology is described in another paper in this conference. A poster describes the ULTRA project overview in more detail.

Joint University Program for Air Transportation Research, 1984

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1987-01-01

The research conducted during 1984 under the NASA/FAA sponsored Joint University Program for Air Transportation Research is summarized. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and bibliographies are presented for research topics, which include navigation, guidance, control and display concepts. An overview of the year's activities for each of the schools is also presented.

Overview of the solar dynamic ground test demonstration program

NASA Technical Reports Server (NTRS)

Shaltens, Richard K.; Boyle, Robert V.

1993-01-01

The Solar Dynamic (SD) Ground Test Demonstration (GTD) program demonstrates the availability of SD technologies in a simulated space environment at the NASA Lewis Research Center (LeRC) vacuum facility. An aerospace industry/ government team is working together to design, fabricate, build, and test a complete SD system. This paper reviews the goals and status of the SD GTD program. A description of the SD system includes key design features of the system, subsystems, and components as reported at the Critical Design Review (CDR).

Training Substance Use Disorder Counselors in Cognitive Behavioral Therapy for Depression: Development and Initial Exploration of an Online Training Program.

PubMed

Curran, Geoffrey M; Woo, Stephanie M; Hepner, Kimberly A; Lai, Wen Pin; Kramer, Teresa L; Drummond, Karen L; Weingardt, Ken

2015-11-01

Evidence based psychotherapies (EBPs) remain underutilized. Models for EBP training and implementation that are cost-effective, minimally disruptive, and sufficiently flexible are needed. Internet-based technology is a promising platform, but questions remain about how this technology can address the barriers to implementation. We developed and examined the implementation of an online training for the Building Recovery by Improving Goals, Habits, and Thoughts (BRIGHT) intervention-a manualized, sixteen-session group depression treatment for individuals with substance use disorders (SUDs). We explored the feasibility of replacing in-person BRIGHT training with a self-paced, online training. A highly partnered and iterative process was followed to translate the written BRIGHT manual and associated didactic training materials into a media rich, interactive, and detailed (12-16 h) online training. Subsequently, 8 volunteer counselors across 7 Veterans' Affairs SUD programs completed the training. Semi-structured interviews focused on the counselors' experiences and their plans for implementing BRIGHT groups. A template approach, using a mixture of deductive and inductive coding, was used for data analyses. The most important barrier to completing training was a lack of protected time. Most counselors were not afforded protected time and reported a sometimes frustrating and fragmented training experience. Many used personal time at work and at home to complete the work. Facilitators to completing the training included positive reactions/attitudes towards the training modules, supervisor support, counselor dedication, and strong beliefs supporting providing services for depression. Many counselors were also concerned about the feasibility of fitting 16 group sessions (2h each) into their program's clinical schedule, but many had devised potential solutions or "work-arounds" to accommodate or approximate the recommended treatment course (e.g., using lunch times, reducing some content/exercises). This work contributes to the literature on implementation of complex EBPs and addresses the strengths and limitations of web-based technologies in supporting the implementation of EBPs. Published by Elsevier Inc.

Development of an antimicrobial stewardship-based infectious diseases elective that incorporates human patient simulation technology.

PubMed

Falcione, Bonnie A; Meyer, Susan M

2014-10-15

To design an elective for pharmacy students that facilitates antimicrobial stewardship awareness, knowledge, and skill development by solving clinical cases, using human patient simulation technology. The elective was designed for PharmD students to describe principles and functions of stewardship programs, select, evaluate, refine, or redesign patient-specific plans for infectious diseases in the context of antimicrobial stewardship, and propose criteria and stewardship management strategies for an antimicrobial class at a health care institution. Teaching methods included active learning and lectures. Cases of bacterial endocarditis and cryptococcal meningitis were developed that incorporated human patient simulation technology. Forty-five pharmacy students completed an antimicrobial stewardship elective between 2010 and 2013. Outcomes were assessed using student perceptions of and performance on rubric-graded assignments. A PharmD elective using active learning, including novel cases conducted with human patient simulation technology, enabled outcomes consistent with those desired of pharmacists assisting in antimicrobial stewardship programs.

An innovative capstone health care informatics clinical residency: Interprofessional team collaboration.

PubMed

Custis, Laura M; Hawkins, Shelley Y; Thomason, Tanna R

2017-03-01

Integrated information systems and wireless technology have been increasingly incorporated into health care organizations with the premise that information technology will promote safe, high-quality, cost-effective patient care. With the advancement of technology, the level of expertise necessary to assume health care information technology roles has escalated. The purpose of this article is to describe a clinical residency project whereby students in a graduate degree health care informatics program successfully fulfilled program competencies through a faculty-lead research project focused on the use of home telehealth with a group of heart failure patients. Through the use of Donabedian's framework of structure, process, and outcomes, the health care informatics students completed essential learning activities deemed essential for transition into the role of an informatics specialist. Health care informatics educational leaders are encouraged to adapt this template of applied learning into their practices.

TECHNOLOGY TRANSFER HANDBOOK: MANAGEMENT OF WATER TREATMENT PLANT RESIDUALS

EPA Science Inventory

Potable water treatment processes produce safe drinking water and generate a wide variety of waste products known as residuals, including organic and inorganic compounds in liquid, solid, and gaseous forms. In the current regulatory climate, a complete management program for a w...

Staying the Course.

ERIC Educational Resources Information Center

Smith, Geoff; Bailey, Vivien

In a yearlong project, Britain's Business and Technology Education Council (BTEC) investigated why some students leave their educational programs before achieving their certificates or diplomas. The project drew information on completion rates from the BTEC database. Views of BTEC centers' staff were canvassed through a national survey covering…

49 CFR 268.19 - Evaluation of applications for preconstruction planning assistance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... planning assistance. 268.19 Section 268.19 Transportation Other Regulations Relating to Transportation... TECHNOLOGY DEPLOYMENT PROGRAM Procedures For Financial Assistance § 268.19 Evaluation of applications for preconstruction planning assistance. The FRA will evaluate the applications for their completeness and...

49 CFR 268.13 - Deadline for submission of applications for preconstruction planning assistance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... preconstruction planning assistance. 268.13 Section 268.13 Transportation Other Regulations Relating to... TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM Procedures For Financial Assistance § 268.13 Deadline for submission of applications for preconstruction planning assistance. Completed application packages shall be...

ExpoCast: Exposure Science for Prioritization and Toxicity Testing (S)

EPA Science Inventory

The US EPA is completing the Phase I pilot for a chemical prioritization research program, called ToxCast. Here EPA is developing methods for using computational chemistry, high-throughput screening, and toxicogenomic technologies to predict potential toxicity and prioritize limi...

ExpoCast: Exposure Science for Prioritization and Toxicity Testing

EPA Science Inventory

The US EPA is completing the Phase I pilot for a chemical prioritization research program, called ToxCastTM. Here EPA is developing methods for using computational chemistry, high-throughput screening, and toxicogenomic technologies to predict potential toxicity and prioritize l...

The current status of education and career paths of students after completion of medical physicist programs in Japan: a survey by the Japanese Board for Medical Physicist Qualification.

PubMed

Kadoya, Noriyuki; Karasawa, Kumiko; Sumida, Iori; Arimura, Hidetaka; Yamada, Syogo

2015-07-01

To standardize educational programs and clinical training for medical physics students, the Japanese Board for Medical Physicist Qualification (JBMP) began to accredit master's, doctorate, and residency programs for medical physicists in 2012. At present, 16 universities accredited by the JBMP offer 22 courses. In this study, we aimed to survey the current status of educational programs and career paths of students after completion of the medical physicist program in Japan. A questionnaire was sent in August 2014 to 32 universities offering medical physicist programs. The questionnaire was created and organized by the educational course certification committee of the JBMP and comprised two sections: the first collected information about the university attended, and the second collected information about characteristics and career paths of students after completion of medical physicist programs from 2008 to 2014. Thirty universities (16 accredited and 14 non-accredited) completed the survey (response rate 94 %). A total of 209, 40, and 3 students graduated from the master's, doctorate, and residency programs, respectively. Undergraduates entered the medical physicist program constantly, indicating an interest in medical physics among undergraduates. A large percentage of the students held a bachelor's degree in radiological technology (master's program 94 %; doctorate program 70 %); graduates obtained a national radiological technologist license. Regarding career paths, although the number of the graduates who work as medical physicist remains low, 7 % with a master's degree and 50 % with a doctorate degree worked as medical physicists. Our results could be helpful for improving the medical physicist program in Japan.

Programmatic status of NASA's CSTI high capacity power Stirling space power converter program

NASA Technical Reports Server (NTRS)

Dudenhoefer, James E.

1990-01-01

An overview is presented of the NASA Lewis Research Center Free-Piston Stirling Space Power Converter Technology Development Program. This work is being conducted under NASA's Civil Space Technology Initiative (CSTI). The goal of the CSTI High Capacity Power element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA space initiatives. Efforts are focused upon increasing system thermal and electric energy conversion efficiency at least fivefold over current SP-100 technology, and on achieving systems that are compatible with space nuclear reactors. The status of test activities with the Space Power Research Engine (SPRE) is discussed. Design deficiencies are gradually being corrected and the power converter is now outputting 11.5 kWe at a temperature ratio of 2 (design output is 12.5 kWe). Detail designs were completed for the 1050 K Component Test Power Converter (CTPC). The success of these and future designs is dependent upon supporting research and technology efforts including heat pipes, gas bearings, superalloy joining technologies and high efficiency alternators. An update of progress in these technologies is provided.

2015 Annual Report for the Flight Opportunities Program

NASA Technical Reports Server (NTRS)

Van Dijk, Alexander

2015-01-01

Welcome to this third edition of the Flight Opportunities program annual report. In this edition, we continue our story of pathfinding NASA's role in the partnership with the U.S. commercial space and space technology R&D communities to advance national space interests and develop technologies critical to NASA's future missions. 2015 was the year in which a planned change to our payload solicitation strategy saw its first tangible result. As you might remember from our 2014 annual report, in 2015 we set out to facilitate a more direct interaction between flight providers and technology developers by providing fixed funding awards to researchers to directly purchase the flight service(s) that best meet their needs. The selection and award of the first six REDDI-F1 flight grants to non-U.S. government researchers was an important milestone in this regard. From now on, using the REDDI-F1 solicitation appendix, the program will enable non-U.S. government researchers to directly purchase flight services on the emerging suborbital market. The same (or similar) commercial flight services will be available to NASA and other U.S. government agencies (OGA) through commercial contracts that NASA has established through our program. For the latter, our program is available to provide campaign management services, similar to the role we play(ed) for technology payloads remaining in our pool from earlier selections. The full impact of this broader strategic change will likely become more visible in the years ahead as our legacy pool gets depleted and we have implemented a new NASA- and OGA-specific call for proposals. One observation that can already be made after two rounds of REDDI-F1 solicitations is that through this change, the list of commercial flight service providers of interest to non-U.S. government researchers has grown from five in 2014 to nine in 2015. On the industry development front, our Announcement of Collaborative Opportunities (ACO) solicitation was promoted to an STMD-wide solicitation and released in 2015 in combination with the Tipping Point solicitation. A total of 22 awards was announced in November 2015, 12 of which are ACO awards, and six of these are funded by Flight Opportunities. Through these ACO awards, the program funds NASA technical expertise and NASA test facilities to aid industry partners in maturing key space technologies, in our case focusing on small launch vehicle technology development. Flight test activity in 2015 saw a steady 13 campaigns with 31 payload-flights (29 unique payloads). Thirteen new payloads were selected into the program in FY2015, and 14 payloads completed flight testing, bringing the total number of completed technology demonstration payloads to 69. Overall, we are pleased with the evolution and growth of the Flight Opportunities program and look forward to continued success in our partnership with the technology R&D community and the commercial space sector.

How to estimate the cost of point-of-care CD4 testing in program settings: an example using the Alere Pima Analyzer in South Africa.

PubMed

Larson, Bruce; Schnippel, Kathryn; Ndibongo, Buyiswa; Long, Lawrence; Fox, Matthew P; Rosen, Sydney

2012-01-01

Integrating POC CD4 testing technologies into HIV counseling and testing (HCT) programs may improve post-HIV testing linkage to care and treatment. As evaluations of these technologies in program settings continue, estimates of the costs of POC CD4 tests to the service provider will be needed and estimates have begun to be reported. Without a consistent and transparent methodology, estimates of the cost per CD4 test using POC technologies are likely to be difficult to compare and may lead to erroneous conclusions about costs and cost-effectiveness. This paper provides a step-by-step approach for estimating the cost per CD4 test from a provider's perspective. As an example, the approach is applied to one specific POC technology, the Pima Analyzer. The costing approach is illustrated with data from a mobile HCT program in Gauteng Province of South Africa. For this program, the cost per test in 2010 was estimated at $23.76 (material costs  = $8.70; labor cost per test  = $7.33; and equipment, insurance, and daily quality control  = $7.72). Labor and equipment costs can vary widely depending on how the program operates and the number of CD4 tests completed over time. Additional costs not included in the above analysis, for on-going training, supervision, and quality control, are likely to increase further the cost per test. The main contribution of this paper is to outline a methodology for estimating the costs of incorporating POC CD4 testing technologies into an HCT program. The details of the program setting matter significantly for the cost estimate, so that such details should be clearly documented to improve the consistency, transparency, and comparability of cost estimates.

Lightning Protection

NASA Technical Reports Server (NTRS)

1991-01-01

Lightning Technologies, Inc., Pittsfield, MA, - a spinoff company founded by president J. Anderson Plumer, a former NASA contractor employee who developed his expertise with General Electric Company's High Voltage Laboratory - was a key player in Langley Research Center's Storm Hazards Research Program. Lightning Technologies used its NASA acquired experience to develop protective measures for electronic systems and composite structures on aircraft, both of which are particularly susceptible to lightning damage. The company also provides protection design and verification testing services for complete aircraft systems or individual components. Most aircraft component manufacturers are among Lightning Technologies' clients.

Alliance for Sequestration Training, Outreach, Research & Education

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olson, Hilary

The Sequestration Training, Outreach, Research and Education (STORE) Alliance at The University of Texas at Austin completed its activity under Department of Energy Funding (DE-FE0002254) on September 1, 2013. The program began as a partnership between the Institute for Geophysics, the Bureau of Economic Geology and the Petroleum and Geosystems Engineering Department at UT. The initial vision of the program was to promote better understanding of CO 2 utilization and storage science and engineering technology through programs and opportunities centered on training, outreach, research and technology transfer, and education. With over 8,000 hrs of formal training and education (and almostmore » 4,500 of those hours awarded as continuing education credits) to almost 1,100 people, STORE programs and activities have provided benefits to the Carbon Storage Program of the Department of Energy by helping to build a skilled workforce for the future CCS and larger energy industry, and fostering scientific public literacy needed to continue the U.S. leadership position in climate change mitigation and energy technologies and application. Now in sustaining mode, the program is housed at the Center for Petroleum and Geosystems Engineering, and benefits from partnerships with the Gulf Coast Carbon Center, TOPCORP and other programs at the university receiving industry funding.« less

Assessment of Lithium-based Battery Electrolytes Developed under the NASA PERS Program

NASA Technical Reports Server (NTRS)

Bennett, William R.; Baldwin, Richard S.

2006-01-01

Recently, NASA formally completed the Polymer Energy Rechargeable System (PERS) Program, which was established in 2000 in collaboration with the Air Force Research Laboratory (AFRL) to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The goal of this program was to ultimately develop an advanced, space-qualified battery technology, which embodied a solid polymer electrolyte (SPE) and complementary components, with improved performance characteristics that would address future aerospace battery requirements. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. A variety of cell and polymeric electrolyte concepts were pursued as part of the development efforts undertaken at numerous governmental, industrial and academic laboratories. Numerous candidate electrolyte materials were developed, synthesized and optimized for evaluation. Utilizing the component screening facility and the "standardized" test procedures developed at the NASA Glenn Research Center, electrochemical screening and performance evaluations of promising candidate materials were completed. This overview summarizes test results for a variety of candidate electrolyte materials that were developed under the PERS Program. Electrolyte properties are contrasted and compared to the original project goals, and the strengths and weaknesses of the electrolyte chemistries are discussed. Limited cycling data for full-cells using lithium metal and vanadium oxide electrodes are also presented. Based on measured electrolyte properties, the projected performance characteristics and temperature limitations of batteries utilizing the advanced electrolytes and components have been estimated. Limitations for the achievement of practical performance levels are also discussed, as well as needs for future research and development.

Updated Heliostorm Warning Mission: Enhancements Based on New Technology

NASA Technical Reports Server (NTRS)

Young, Roy M.

2010-01-01

The Heliostorm (also referred to as Geostorm) mission has been regarded as the best choice for the first application of solar sail technology. The objective of Heliostorm is to obtain data from an orbit station slightly displaced from the ecliptic at or nearer to the Sun than 0.98 AU, which places it twice as close to the sun as Earth's natural L1 point at 0.993 AU. Heliostorm has been the subject of several mission studies over the past decade, with the most complete study conducted in 1999 in conjunction with a proposed New Millennium Program (NMP) Space Technology 5 (ST-5) flight opportunity. Recently, over a two and one-half year period dating from 2002 through 2005, NASA s In-Space Propulsion Technology Program (ISTP) matured solar sail technology from laboratory components to fully integrated systems, demonstrated in as relevant a space environment as could feasibly be simulated on the ground. Work under this program has yielded promising results for enhanced Heliostorm mission performance. This paper will present the preliminary results of an updated Heliostorm mission design study including the enhancements incorporated during the design, development, analysis and testing of the system ground demonstrator.

The magnetohydrodynamics coal-fired flow facility

NASA Astrophysics Data System (ADS)

1995-01-01

In this quarterly technical progress report, UTSI reports on the status of a multitask contract to develop the technology for the steam bottoming portion of a MHD Steam Combined Cycle Power Plant. The report describes the facility maintenance and environmental work completed, status of completing technical reports and certain key administrative actions occurring during the quarter. With program resources at a minimum to closeout the MHD program, no further testing occurred during the quarter, but the DOE CFFF facility was maintained in a standby status with winterization, preventive maintenance and repairs accomplished as needed. Plans and preparations progressed for environmental actions needed at the site to investigate and characterize the groundwater and for removal/disposal of asbestos in the cooling tower. Work continued to progress on archiving the results of the MHD program.

Deep Space Systems Technology Program Future Deliveries

NASA Technical Reports Server (NTRS)

Salvo, Christopher G.; Keuneke, Matthew S.

2000-01-01

NASA is in a period of frequent launches of low cost deep space missions with challenging performance needs. The modest budgets of these missions make it impossible for each to develop its own technology, therefore, efficient and effective development and insertion of technology for these missions must be approached at a higher level than has been done in the past. The Deep Space Systems Technology Program (DSST), often referred to as X2000, has been formed to address this need. The program is divided into a series of "Deliveries" that develop and demonstrate a set of spacecraft system capabilities with broad applicability for use by multiple missions. The First Delivery Project, to be completed in 2001, will provide a one MRAD-tolerant flight computer, power switching electronics, efficient radioisotope power source, and a transponder with services at 8.4 GHz and 32 GHz bands. Plans call for a Second Delivery in late 2003 to enable complete deep space systems in the 10 to 50 kg class, and a Third Delivery built around Systems on a Chip (extreme levels of electronic and microsystems integration) around 2006. Formulation of Future Deliveries (past the First Delivery) is ongoing and includes plans for such developments as highly miniaturized digital/analog/power electronics, optical communications, multifunctional structures, miniature lightweight propulsion, advanced thermal control techniques, highly efficient radioisotope power sources, and a unified flight ground software architecture to support the needs of future highly intelligent space systems. All developments are targeted at broad applicability and reuse, and will be commercialized within the US.

Propulsion/flight control integration technology (PROFIT) design analysis status

NASA Technical Reports Server (NTRS)

Carlin, C. M.; Hastings, W. J.

1978-01-01

The propulsion flight control integration technology (PROFIT) program was designed to develop a flying testbed dedicated to controls research. The preliminary design, analysis, and feasibility studies conducted in support of the PROFIT program are reported. The PROFIT system was built around existing IPCS hardware. In order to achieve the desired system flexibility and capability, additional interfaces between the IPCS hardware and F-15 systems were required. The requirements for additions and modifications to the existing hardware were defined. Those interfaces involving the more significant changes were studied. The DCU memory expansion to 32K with flight qualified hardware was completed on a brassboard basis. The uplink interface breadboard and a brassboard of the central computer interface were also tested. Two preliminary designs and corresponding program plans are presented.

A Novel Inexpensive Use of Smartphone Technology for Ecological Momentary Assessment in Middle-Aged Women.

PubMed

Ehlers, Diane K; Huberty, Jennifer; Buman, Matthew; Hooker, Steven; Todd, Michael; de Vreede, Gert-Jan

2016-03-01

Commercially available mobile and Internet technologies present a promising opportunity to feasibly conduct ecological momentary assessment (EMA). The purpose of this study was to describe a novel EMA protocol administered on middle-aged women's smartphones via text messaging and mobile Internet. Women (N = 9; mean age = 46.2 ± 8.2 y) received 35 text message prompts to a mobile survey assessing activity, self-worth, and self-efficacy over 14 days. Prompts were scheduled and surveys were administered using commercial, Internet-based programs. Prompting was tailored to each woman's daily wake/sleep schedule. Women concurrently wore a wrist-worn accelerometer. Feasibility was assessed via survey completion, accelerometer wear, participant feedback, and researcher notes. Of 315 prompted surveys, 287 responses were valid (91.1%). Average completion time was 1.52 ± 1.03 minutes. One participant's activity data were excluded due to accelerometer malfunction, resulting in complete data from 8 participants (n = 252 [80.0%] valid observations). Women reported the survey was easily and quickly read/completed. However, most thought the accelerometer was inconvenient. High completion rates and perceived usability suggest capitalizing on widely available technology and tailoring prompting schedules may optimize EMA in middle-aged women. However, researchers may need to carefully select objective monitors to maintain data validity while limiting participant burden.

Bridging the digital divide by increasing computer and cancer literacy: community technology centers for head-start parents and families.

PubMed

Salovey, Peter; Williams-Piehota, Pamela; Mowad, Linda; Moret, Marta Elisa; Edlund, Denielle; Andersen, Judith

2009-01-01

This article describes the establishment of two community technology centers affiliated with Head Start early childhood education programs focused especially on Latino and African American parents of children enrolled in Head Start. A 6-hour course concerned with computer and cancer literacy was presented to 120 parents and other community residents who earned a free, refurbished, Internet-ready computer after completing the program. Focus groups provided the basis for designing the structure and content of the course and modifying it during the project period. An outcomes-based assessment comparing program participants with 70 nonparticipants at baseline, immediately after the course ended, and 3 months later suggested that the program increased knowledge about computers and their use, knowledge about cancer and its prevention, and computer use including health information-seeking via the Internet. The creation of community computer technology centers requires the availability of secure space, capacity of a community partner to oversee project implementation, and resources of this partner to ensure sustainability beyond core funding.

Student performance in computing education: an empirical analysis of online learning in programming education environments

NASA Astrophysics Data System (ADS)

Xia, Belle Selene; Liitiäinen, Elia

2017-11-01

The benefits of using online exercises have been analysed in terms of distance learning, automatic assessment and self-regulated learning. In this study, we have not found a direct proportional relationship between student performance in the course exercises that use online technologies and the exam grades. We see that the average submission rate to these online exercises is not positively correlated with the exercise points. Yet, our results confirm that doing exercises along supports student learning and skill accumulation equipping them with the knowledge of programming. While the student performance in programming courses is affected by factors such as prior background in programming, cognitive skills and the quality of teaching, completing the course exercises via learning-by-doing is an indispensable part of teaching. Based on the student feedback from the course survey, the students are highly satisfied with using online technologies as part of learning.

Preschool teachers' perception and use of hearing assistive technology in educational settings.

PubMed

Nelson, Lauri H; Poole, Bridget; Muñoz, Karen

2013-07-01

This study explored how often sound-field amplification and personal frequency-modulated (FM) systems are used in preschool classrooms, teacher perceptions of advantages and disadvantages of using hearing assistive technology, and teacher recommendations for hearing assistive technology use. The study used a cross-sectional survey design. Participants were professionals who provided services to preschool-age children who are deaf or hard of hearing in public or private schools. A total of 306 surveys were sent to 162 deaf education programs throughout the United States; 99 surveys were returned (32%). Simple statistics were used to describe the quantitative survey results; content analysis was completed on open-ended survey comments. Surveys were received from teachers working at listening and spoken language preschool programs (65%) and at bilingual-bicultural and total communication preschool programs (35%). Most respondents perceived that hearing assistive technology improved students' academic performance, speech and language development, behavior, and attention in the classroom. The majority of respondents also reported that they definitely would or probably would recommend a sound-field system (77%) or personal FM system (71%) to other educators. Hearing assistive technology is frequently used in preschool classrooms of children who are deaf or hard of hearing, with generally positive teacher perceptions of the benefits of using such technology.

Producing physician-scientists: a survey of graduates from the Harvard--MIT Program in Health Sciences and Technology.

PubMed

Wilkerson, L; Abelmann, W H

1993-03-01

The Harvard-MIT Program in Health Sciences and Technology (HST) is a flexible, preclinical curriculum, taught by members of the faculties of both Harvard University and the Massachusetts Institute of Technology, that stresses a rigorous, scientific, quantitative approach, small classes (usually fewer than 50 students), and student-faculty interaction. The program is aimed at students with strong backgrounds in quantitative and biological sciences who are interested in careers as physician-scientists. The first 234 students of the program, who graduated between 1975 and 1985, were asked to participate in a 1990 follow-up study by completing a four-page questionnaire and submitting curricula vitae and lists of publications, if available. Data were analyzed quantitatively and qualitatively. Of the 234 graduates, 211 (90%) responded. Sixty-three (30%) had received both MD and PhD degrees. The graduates were twice as likely to describe their primary professional roles as academic than as clinical practice; 94 held full-time faculty positions at 50 medical schools. The 154 (73%) in research spent an average of 51% of their time on this activity. According to the 179 graduates (85%) who stated that they would choose HST again, the most frequently mentioned reasons were the quantitative approach that emphasized integration of basic science and clinical practice (49%) and the small class size (37%). The HST MD curriculum, with its emphasis on basic science and research experience, has been successful in preparing carefully selected students for careers as physician-scientists, without necessarily requiring the completion of a PhD degree.

Graduate Automotive Technology Education (GATE) Program: Center of Automotive Technology Excellence in Advanced Hybrid Vehicle Technology at West Virginia University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigle N. Clark

2006-12-31

This report summarizes the technical and educational achievements of the Graduate Automotive Technology Education (GATE) Center at West Virginia University (WVU), which was created to emphasize Advanced Hybrid Vehicle Technology. The Center has supported the graduate studies of 17 students in the Department of Mechanical and Aerospace Engineering and the Lane Department of Computer Science and Electrical Engineering. These students have addressed topics such as hybrid modeling, construction of a hybrid sport utility vehicle (in conjunction with the FutureTruck program), a MEMS-based sensor, on-board data acquisition for hybrid design optimization, linear engine design and engine emissions. Courses have been developedmore » in Hybrid Vehicle Design, Mobile Source Powerplants, Advanced Vehicle Propulsion, Power Electronics for Automotive Applications and Sensors for Automotive Applications, and have been responsible for 396 hours of graduate student coursework. The GATE program also enhanced the WVU participation in the U.S. Department of Energy Student Design Competitions, in particular FutureTruck and Challenge X. The GATE support for hybrid vehicle technology enhanced understanding of hybrid vehicle design and testing at WVU and encouraged the development of a research agenda in heavy-duty hybrid vehicles. As a result, WVU has now completed three programs in hybrid transit bus emissions characterization, and WVU faculty are leading the Transportation Research Board effort to define life cycle costs for hybrid transit buses. Research and enrollment records show that approximately 100 graduate students have benefited substantially from the hybrid vehicle GATE program at WVU.« less

Lessons from Providing Professional Development in Remote Sensing for Community College Instructors

NASA Astrophysics Data System (ADS)

Allen, J. E.

2014-12-01

Two-year colleges and Tribal colleges are important centers for workforce education and training. A professional development program funded by the National Science Foundation's Advanced Technological Education Program, 2007-2011 and 2012-2015, is providing the resources needed by instructors at those colleges to develop courses and programs in remote sensing. The highly successful program, "Integrated Geospatial Education and Technology Training-Remote Sensing (iGETT-RS)" will complete its currently funded work in May 2015. 76 instructors of Geographic Information Systems (GIS) from all over the country will have been served. Each of them will have spent 18 months on the project, participating in two Summer Institutes at NASA and USGS and in monthly webinars on science and technology of remote sensing. iGETT-RS participants have created their own exercises and "concept modules" for the classroom, and many have created new courses and new programs across the country. As the external evaluator for iGETT-RS expressed it, the impact on project participants can "only be described as transformational." Viewers of this presentation will learn about the iGETT-RS project design and approach; successes, failures and lessons learned by the staff; and how to access the workshop materials and participant-authored classroom resources. Viewers will also learn about the Geospatial Technology Competency Model at the US Department of Labor, and about specifications for the Remote Sensing Model Course recently developed by the National Geospatial Technology Center to provide invaluable frameworks for faculty, students, administrators and employers.

"First generation" automated DNA sequencing technology.

PubMed

Slatko, Barton E; Kieleczawa, Jan; Ju, Jingyue; Gardner, Andrew F; Hendrickson, Cynthia L; Ausubel, Frederick M

2011-10-01

Beginning in the 1980s, automation of DNA sequencing has greatly increased throughput, reduced costs, and enabled large projects to be completed more easily. The development of automation technology paralleled the development of other aspects of DNA sequencing: better enzymes and chemistry, separation and imaging technology, sequencing protocols, robotics, and computational advancements (including base-calling algorithms with quality scores, database developments, and sequence analysis programs). Despite the emergence of high-throughput sequencing platforms, automated Sanger sequencing technology remains useful for many applications. This unit provides background and a description of the "First-Generation" automated DNA sequencing technology. It also includes protocols for using the current Applied Biosystems (ABI) automated DNA sequencing machines. © 2011 by John Wiley & Sons, Inc.

A view from the AIAA: Introduction of new energy storage technology into orbital programs

NASA Technical Reports Server (NTRS)

Badcock, Charles

1987-01-01

The development of new energy storage technology must be heavily weighted toward the application. The requirements for transitioning low risk technology into operational space vehicles must remain the central theme even at the preliminary development stages by the development of efforts to define operational issues and verify the reliability of the system. Failure to follow a complete plan that results in a flight qualified unit may lead to an orphan technology. Development efforts must be directed toward a stable development where changes in design are evolutionary and end items are equivalent to flight units so that life and qualification testing can be used as a vehicle to demonstrate the acceptability of the technology.

Girls Entering Technology, Science, Math and Research Training (get Smart): a Model for Preparing Girls in Science and Engineering Disciplines

NASA Astrophysics Data System (ADS)

Mawasha, P. Ruby; Lam, Paul C.; Vesalo, John; Leitch, Ronda; Rice, Stacey

In this article, it is postulated that the development of a successful training program for women in science, math, engineering, and technology (SMET) disciplines is dependent upon a combination of several factors, including (a) career orientation: commitment to SMET as a career, reasons for pursuing SMET as a career, and opportunity to pursue a SMET career; (b) knowledge of SMET: SMET courses completed, SMET achievement, and hands-on SMET activities; (c) academic and social support: diversity initiatives, role models, cooperative learning, and peer counseling; and (d) self-concept: program emphasis on competence and peer competition. The proposed model is based on the GET SMART (Girls Entering Technology, Science, Math and Research Training) workshop program to prepare and develop female high school students as competitive future SMET professionals. The proposed model is not intended to serve as an elaborate theory, but as a general guide in training females entering SMET disciplines.

Review of German work on controlled re-entry technology

NASA Astrophysics Data System (ADS)

Wuest, Walter

The concept of a reusable space transporter formed a focus of much effort for the German firms Junkers Flugzeug- und Motorenwerke (JFM), Messerschmitt-Bölkow-Blohm und Voss (MBB) and Entwicklungsring Nord (ERNO), together with the Deutsche Forschungs- und Veruchsanstalt für Luft- und Raumfahrt (DFVLR) and different University institutes during the decade beginning 1962. The result was the definition, in 1972, of a program of the “Arbeitsgruppe Rückkehrtechnologie” (ART, Working group for reentry technology) which integrated all relevant capacities of research establishments, industry, and universities. The aim was the maintenance of the technical-scientific capabilities for advanced high velocity flight systems and to qualify for international cooperation in this field. Only a small part of this work could be completed, as the ART-program was never accepted by the German Ministry for Research and Technology. So the current work was stopped by the end of 1975. Nevertheless, as the ART-program can serve as a guide-line for possible future work a summary of this work is given.

Multi-megawatt inverter/converter technology for space power applications

NASA Technical Reports Server (NTRS)

Myers, Ira T.; Baumann, Eric D.; Kraus, Robert; Hammoud, Ahmad N.

1992-01-01

Large power conditioning mass reductions will be required to enable megawatt power systems envisioned by the Strategic Defense Initiative, the Air Force, and NASA. Phase 1 of a proposed two phase interagency program has been completed to develop an 0.1 kg/kW DC/DC converter technology base for these future space applications. Three contractors, Hughes, General Electric (GE), and Maxwell were Phase 1 contractors in a competitive program to develop a megawatt lightweight DC/DC converter. Researchers at NASA Lewis Research Center and the University of Wisconsin also investigated technology in topology and control. All three contractors, as well as the University of Wisconsin, concluded at the end of the Phase 1 study, which included some critical laboratory work, that 0.1-kg/kW megawatt DC/DC converters can be built. This is an order of magnitude lower specific weight than is presently available. A brief description of each of the concepts used to meet the ambitious goals of this program are presented.

Technology for small spacecraft

NASA Technical Reports Server (NTRS)

1994-01-01

This report gives the results of a study by the National Research Council's Panel on Small Spacecraft Technology that reviewed NASA's technology development program for small spacecraft and assessed technology within the U.S. government and industry that is applicable to small spacecraft. The panel found that there is a considerable body of advanced technology currently available for application by NASA and the small spacecraft industry that could provide substantial improvement in capability and cost over those technologies used for current NASA small spacecraft. These technologies are the result of developments by commercial companies, Department of Defense agencies, and to a lesser degree NASA. The panel also found that additional technologies are being developed by these same entities that could provide additional substantial improvement if development is successfully completed. Recommendations for future technology development efforts by NASA across a broad technological spectrum are made.

The Economic, Energy, and Environmental Impacts of the Energy-Related Inventions Program

DOE R&D Accomplishments Database

Brown, M.A.; Wilson, C.R.; Franchuk, C.A.; Cohn, S.M.; Jones, D.

1994-07-01

This report provides information on the economic, energy, and environmental impacts of inventions supported by the Energy-Related Inventions Program (ERIP) -- a program jointly operated by the US Department of Energy and the National Institute of Standards and Technology (NIST). It describes the results of the latest in a series of ERIP evaluation projects that have been completed since 1980. The period of interest is 1980 through 1992. The evaluation is based on data collected in 1993 through mail and telephone surveys of 253 program participants, and historical data collected during previous evaluations for an additional 189 participants.

Rotorcraft flight-propulsion control integration: An eclectic design concept

NASA Technical Reports Server (NTRS)

Mihaloew, James R.; Ballin, Mark G.; Ruttledge, D. C. G.

1988-01-01

The NASA Ames and Lewis Research Centers, in conjunction with the Army Research and Technology Laboratories, have initiated and partially completed a joint research program focused on improving the performance, maneuverability, and operating characteristics of rotorcraft by integrating the flight and propulsion controls. The background of the program, its supporting programs, its goals and objectives, and an approach to accomplish them are discussed. Results of the modern control governor design of the General Electric T700 engine and the Rotorcraft Integrated Flight-Propulsion Control Study, which were key elements of the program, are also presented.

Interactive program for analysis and design problems in advanced composites technology

NASA Technical Reports Server (NTRS)

Cruse, T. A.; Swedlow, J. L.

1971-01-01

During the past year an experimental program in the fracture of advanced fiber composites has been completed. The experimental program has given direction to additional experimental and theoretical work. A synthesis program for designing low weight multifastener joints in composites is proposed, based on extensive analytical background. A number of failed joints have been thoroughly analyzed to evaluate the failure hypothesis used in the synthesis procedure. Finally, a new solution is reported for isotropic and anisotropic laminates using the boundary-integral method. The solution method offers significant savings of computer core and time for important problems.

Integrated Technology Assessment Center (ITAC) Update

NASA Technical Reports Server (NTRS)

Taylor, J. L.; Neely, M. A.; Curran, F. M.; Christensen, E. R.; Escher, D.; Lovell, N.; Morris, Charles (Technical Monitor)

2002-01-01

The Integrated Technology Assessment Center (ITAC) has developed a flexible systems analysis framework to identify long-term technology needs, quantify payoffs for technology investments, and assess the progress of ASTP-sponsored technology programs in the hypersonics area. For this, ITAC has assembled an experienced team representing a broad sector of the aerospace community and developed a systematic assessment process complete with supporting tools. Concepts for transportation systems are selected based on relevance to the ASTP and integrated concept models (ICM) of these concepts are developed. Key technologies of interest are identified and projections are made of their characteristics with respect to their impacts on key aspects of the specific concepts of interest. Both the models and technology projections are then fed into the ITAC's probabilistic systems analysis framework in ModelCenter. This framework permits rapid sensitivity analysis, single point design assessment, and a full probabilistic assessment of each concept with respect to both embedded and enhancing technologies. Probabilistic outputs are weighed against metrics of interest to ASTP using a multivariate decision making process to provide inputs for technology prioritization within the ASTP. ITAC program is currently finishing the assessment of a two-stage-to-orbit (TSTO), rocket-based combined cycle (RBCC) concept and a TSTO turbine-based combined cycle (TBCC) concept developed by the team with inputs from NASA. A baseline all rocket TSTO concept is also being developed for comparison. Boeing has recently submitted a performance model for their Flexible Aerospace System Solution for Tomorrow (FASST) concept and the ISAT program will provide inputs for a single-stage-to-orbit (SSTO) TBCC based concept in the near-term. Both of these latter concepts will be analyzed within the ITAC framework over the summer. This paper provides a status update of the ITAC program.

Active and passive computed tomography mixed waste focus area final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberson, G P

1998-08-19

The Mixed Waste Focus Area (MWFA) Characterization Development Strategy delineates an approach to resolve technology deficiencies associated with the characterization of mixed wastes. The intent of this strategy is to ensure the availability of technologies to support the Department of Energy's (DOE) mixed waste low-level or transuranic (TRU) contaminated waste characterization management needs. To this end the MWFA has defined and coordinated characterization development programs to ensure that data and test results necessary to evaluate the utility of non-destructive assay technologies are available to meet site contact handled waste management schedules. Requirements used as technology development project benchmarks are basedmore » in the National TRU Program Quality Assurance Program Plan. These requirements include the ability to determine total bias and total measurement uncertainty. These parameters must be completely evaluated for waste types to be processed through a given nondestructive waste assay system constituting the foundation of activities undertaken in technology development projects. Once development and testing activities have been completed, Innovative Technology Summary Reports are generated to provide results and conclusions to support EM-30, -40, or -60 end user/customer technology selection. The Active and Passive Computed Tomography non-destructive assay system is one of the technologies selected for development by the MWFA. Lawrence Livermore National Laboratory's (LLNL) is developing the Active and Passive Computed Tomography (A&PCT) nondestructive assay (NDA) technology to identify and accurately quantify all detectable radioisotopes in closed containers of waste. This technology will be applicable to all types of waste regardless of .their classification; low level, transuranic or provide results and conclusions to support EM-30, -40, or -60 end user/customer technology selection. The Active and Passive Computed Tomography non-destructive assay system is one of the technologies selected for development by the MWFA. Lawrence Livermore National Laboratory's (LLNL) is developing the Active and Passive Computed Tomography (A&PCT) nondestructive assay (NDA) technology to identify and accurately quantify all detectable radioisotopes in closed containers of waste. This technology will be applicable to all types of waste regardless of .their classification; low level, transuranic or mixed, which contains radioactivity and hazardous organic species. The scope of our technology is to develop a non-invasive waste-drum scanner that employs the principles of computed tomography and gamma-ray spectral analysis to identify and quantify all of the detectable radioisotopes. Once this and other applicable technologies are developed, waste drums can be non- destructively and accurately characterized to satisfy repository and regulatory guidelines prior to disposal.« less

U.S. Supersonic Commercial Aircraft: Assessing NASA's High Speed Research Program

NASA Technical Reports Server (NTRS)

1997-01-01

The legislatively mandated objectives of the National Aeronautics and Space Administration (NASA) include "the improvement of the usefulness, performance, speed, safety, and efficiency of aeronautical and space vehicles" and "preservation of the United States' preeminent position in aeronautics and space through research and technology development related to associated manufacturing processes." Most of NASA's activities are focused on the space-related aspects of these objectives. However, NASA also conducts important work related to aeronautics. NASA's High Speed Research (HSR) Program is a focused technology development program intended to enable the commercial development of a high speed (i.e., supersonic) civil transport (HSCT). However, the HSR Program will not design or test a commercial airplane (i.e., an HSCT); it is industry's responsibility to use the results of the HSR Program to develop an HSCT. An HSCT would be a second generation aircraft with much better performance than first generation supersonic transports (i.e., the Concorde and the Soviet Tu-144). The HSR Program is a high risk effort: success requires overcoming many challenging technical problems involving the airframe, propulsion system, and integrated aircraft. The ability to overcome all of these problems to produce an affordable HSCT is far from certain. Phase I of the HSR Program was completed in fiscal year 1995; it produced critical information about the ability of an HSCT to satisfy environmental concerns (i-e., noise and engine emissions). Phase II (the final phase according to current plans) is scheduled for completion in 2002. Areas of primary emphasis are propulsion, airframe materials and structures, flight deck systems, aerodynamic performance, and systems integration.

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

DOE Office of Scientific and Technical Information (OSTI.GOV)

St. Germain, Shawn W.; Farris, Ronald K.; Whaley, April M.

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear powermore » plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.« less

Development of Life Support System Technologies for Human Lunar Missions

NASA Technical Reports Server (NTRS)

Barta, Daniel J.; Ewert, Michael K.

2009-01-01

With the Preliminary Design Review (PDR) for the Orion Crew Exploration Vehicle planned to be completed in 2009, Exploration Life Support (ELS), a technology development project under the National Aeronautics and Space Administration s (NASA) Exploration Technology Development Program, is focusing its efforts on needs for human lunar missions. The ELS Project s goal is to develop and mature a suite of Environmental Control and Life Support System (ECLSS) technologies for potential use on human spacecraft under development in support of U.S. Space Exploration Policy. ELS technology development is directed at three major vehicle projects within NASA s Constellation Program (CxP): the Orion Crew Exploration Vehicle (CEV), the Altair Lunar Lander and Lunar Surface Systems, including habitats and pressurized rovers. The ELS Project includes four technical elements: Atmosphere Revitalization Systems, Water Recovery Systems, Waste Management Systems and Habitation Engineering, and two cross cutting elements, Systems Integration, Modeling and Analysis, and Validation and Testing. This paper will provide an overview of the ELS Project, connectivity with its customers and an update to content within its technology development portfolio with focus on human lunar missions.

Robotics Scoping Study to Evaluate Advances in Robotics Technologies that Support Enhanced Efficiencies for Yucca Mountain Repository Operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

T. Burgess; M. Noakes; P. Spampinato

This paper presents an evaluation of robotics and remote handling technologies that have the potential to increase the efficiency of handling waste packages at the proposed Yucca Mountain High-Level Nuclear Waste Repository. It is expected that increased efficiency will reduce the cost of operations. The goal of this work was to identify technologies for consideration as potential projects that the U.S. Department of Energy Office of Civilian Radioactive Waste Management, Office of Science and Technology International Programs, could support in the near future, and to assess their ''payback'' value. The evaluation took into account the robotics and remote handling capabilitiesmore » planned for incorporation into the current baseline design for the repository, for both surface and subsurface operations. The evaluation, completed at the end of fiscal year 2004, identified where significant advantages in operating efficiencies could accrue by implementing any given robotics technology or approach, and included a road map for a multiyear R&D program for improvements to remote handling technology that support operating enhancements.« less

The Manned Spacecraft Center and medical technology

NASA Technical Reports Server (NTRS)

Johnston, R. S.; Pool, S. L.

1974-01-01

A number of medically oriented research and hardware development programs in support of manned space flights have been sponsored by NASA. Blood pressure measuring systems for use in spacecraft are considered. In some cases, complete new bioinstrumentation systems were necessary to accomplish a specific physiological study. Plans for medical research during the Skylab program are discussed along with general questions regarding space-borne health service systems and details concerning the Health Services Support Control Center.

A Successful Infusion Process for Enabling Lunar Exploration Technologies

NASA Technical Reports Server (NTRS)

Over, Ann P.; Klem, Mark K.; Motil, Susan M.

2008-01-01

The NASA Vision for Space Exploration begins with a more reliable flight capability to the International Space Station and ends with sending humans to Mars. An important stepping stone on the path to Mars encompasses human missions to the Moon. There is little doubt throughout the stakeholder community that new technologies will be required to enable this Vision. However, there are many factors that influence the ability to successfully infuse any technology including the technical risk, requirement and development schedule maturity, and, funds available. This paper focuses on effective infusion processes that have been used recently for the technologies in development for the lunar exploration flight program, Constellation. Recent successes with Constellation customers are highlighted for the Exploration Technology Development Program (ETDP) Projects managed by NASA Glenn Research Center (GRC). Following an overview of the technical context of both the flight program and the technology capability mapping, the process is described for how to effectively build an integrated technology infusion plan. The process starts with a sound risk development plan and is completed with an integrated project plan, including content, schedule and cost. In reality, the available resources for this development are going to change over time, necessitating some level of iteration in the planning. However, the driving process is based on the initial risk assessment, which changes only when the overall architecture changes, enabling some level of stability in the process.

Patients' discharge experiences: returning home after open-heart surgery.

PubMed

Lapum, Jennifer; Angus, Jan E; Peter, Elizabeth; Watt-Watson, Judy

2011-01-01

This study explored patients' narratives of technology in heart surgery and recovery. A narrative inquiry was conducted with a sample of 16 individuals. Interviews were completed 2 to 4 days after transfer from cardiovascular intensive care, and 4 to 6 weeks after discharge. Participants completed journals between these 2 time periods. Discharge and the return home were highlighted as key transitions. These transitions were driven by a technological script that included teachings and texts provided upon discharge. Complicating participants' narratives were their own personal dramas and self-characterizations of vulnerability, as they struggled to incorporate this script into the particularities of their daily lives. Comprehensive conceptualizations of technology that involve the associated logics and pathways of recovery provide deep insights into patients' stories of recovery from heart surgery. It is salient that discharge programs consider the ways that technology enters into patients' narratives, and also consider dialogical approaches to communication, education, and supportive interventions that are offered at multiple intervals and continue in the home. Copyright © 2011 Elsevier Inc. All rights reserved.

Cast Metals Coalition Technology Transfer and Program Management Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gwyn, Mike

2009-03-31

The Cast Metals Coalition (CMC) partnership program was funded to ensure that the results of the Department of Energy's (DOE) metalcasting research and development (R&D) projects are successfully deployed into industry. Specifically, the CMC program coordinated the transfer and deployment of energy saving technologies and process improvements developed under separately funded DOE programs and projects into industry. The transition of these technologies and process improvements is a critical step in the path to realizing actual energy savings. At full deployment, DOE funded metalcasting R&D results are projected to save 55% of the energy used by the industry in 1998. Thismore » closely aligns with DOE's current goal of driving a 25% reduction in industrial energy intensity by 2017. In addition to benefiting DOE, these energy savings provide metalcasters with a significant economic advantage. Deployment of already completed R&D project results and those still underway is estimated to return over 500% of the original DOE and industry investment. Energy savings estimates through December 2008 from the Energy-Saving Melting and Revert Reduction Technology (E-SMARRT) portfolio of projects alone are 12 x 1012 BTUs, with a projection of over 50 x 1012 BTUs ten years after program completion. These energy savings and process improvements have been made possible through the unique collaborative structure of the CMC partnership. The CMC team consists of DOE's Office of Industrial Technology, the three leading metalcasting technical societies in the U.S: the American Foundry Society; the North American Die Casting Association; and the Steel Founders Society of America; and the Advanced Technology Institute (ATI), a recognized leader in distributed technology management. CMC provides collaborative leadership to a complex industry composed of approximately 2,100 companies, 80% of which employ less than 100 people, and only 4% of which employ more than 250 people. Without collaboration, new technologies enabling energy efficiencies and environment-friendly improvements are slow to develop, and have trouble obtaining a broad application. The CMC team was able to effectively and efficiently transfer the results of DOE's metalcasting R&D projects to industry by utilizing and delivering the numerous communication vehicles identified in the proposal. The three metalcasting technical associations achieved significant technology transition results under this program. In addition to reaching over 23,000 people per year through Modern Casting and 28,000 through Engineered Casting Solutions, AFS had 84 national publications and reached over 1,200 people annually through Cast Metals Institute (CMI) education courses. NADCA's education department reached over 1,000 people each year through their courses, in addition to reaching over 6,000 people annually through Die Casting Engineer, and publishing 58 papers. The SFSA also published 99 research papers and reached over 1,000 people annually through their member newsletters. In addition to these communication vehicles, the CMC team conducted numerous technical committee meetings, project reviews, and onsite visits. All of these efforts to distribute the latest metalcasting technologies contributed to the successful deployment of DOE's R&D projects into industry. The DOE/CMC partnership demonstrated significant success in the identification and review of relevant and easy-to-implement metalcasting energy-saving processes and technologies so that the results are quickly implemented and become general practice. The results achieved in this program demonstrate that sustained technology transfer efforts are a critical step in the deployment of R&D projects to industry.« less

Workforce Professionalism in Drug Treatment Services: Impact of California’s Proposition 36

PubMed Central

Wu, Fei; Hser, Yih-Ing

2011-01-01

This article investigates whether California’s Proposition 36 has promoted the workforce professionalism of drug treatment services during its first five years of implementation. Program surveys inquiring about organizational information, Proposition 36 implementation, and staffing were conducted in 2003 and 2005 among all treatment providers serving Proposition 36 clients in five selected California counties (San Diego, Riverside, Kern, Sacramento, and San Francisco). A one-hour self-administered questionnaire was completed by 118 treatment providers representing 102 programs. This article examines five topics that are relevant to drug treatment workforce professionalism: resources and capability, standardized intake assessment and outcome evaluation, staff qualification, program accreditation, and information technology. Results suggest that Proposition 36 had a positive influence on the drug treatment workforce’s professionalism. Improvements have been observed in program resources, client intake assessment and outcome evaluation databases, staff professionalization, program accreditation, and information technology system. However, some areas remain problematic, including, for example, the consistent lack of adequate resources serving women with children. PMID:21036513

Robotic Mission to Mars: Hands-on, minds-on, web-based learning

NASA Astrophysics Data System (ADS)

Mathers, Naomi; Goktogen, Ali; Rankin, John; Anderson, Marion

2012-11-01

Problem-based learning has been demonstrated as an effective methodology for developing analytical skills and critical thinking. The use of scenario-based learning incorporates problem-based learning whilst encouraging students to collaborate with their colleagues and dynamically adapt to their environment. This increased interaction stimulates a deeper understanding and the generation of new knowledge. The Victorian Space Science Education Centre (VSSEC) uses scenario-based learning in its Mission to Mars, Mission to the Orbiting Space Laboratory and Primary Expedition to the M.A.R.S. Base programs. These programs utilize methodologies such as hands-on applications, immersive-learning, integrated technologies, critical thinking and mentoring to engage students in Science, Technology, Engineering and Mathematics (STEM) and highlight potential career paths in science and engineering. The immersive nature of the programs demands specialist environments such as a simulated Mars environment, Mission Control and Space Laboratory, thus restricting these programs to a physical location and limiting student access to the programs. To move beyond these limitations, VSSEC worked with its university partners to develop a web-based mission that delivered the benefits of scenario-based learning within a school environment. The Robotic Mission to Mars allows students to remotely control a real rover, developed by the Australian Centre for Field Robotics (ACFR), on the VSSEC Mars surface. After completing a pre-mission training program and site selection activity, students take on the roles of scientists and engineers in Mission Control to complete a mission and collect data for further analysis. Mission Control is established using software developed by the ACRI Games Technology Lab at La Trobe University using the principles of serious gaming. The software allows students to control the rover, monitor its systems and collect scientific data for analysis. This program encourages students to work scientifically and explores the interaction between scientists and engineers. This paper presents the development of the program, including the involvement of university students in the development of the rover, the software, and the collation of the scientific data. It also presents the results of the trial phase of this program including the impact on student engagement and learning outcomes.

Advanced space system concepts and their orbital support needs (1980 - 2000). Volume 4: Detailed data. Part 2: Program plans and common support needs (a study of the commonality of space vehicle applications to future national needs

NASA Technical Reports Server (NTRS)

Bekey, I.; Mayer, H. L.; Wolfe, M. G.

1976-01-01

The methodology of alternate world future scenarios is utilized for selecting a plausible, though not advocated, set of future scenarios each of which results in a program plan appropriate for the respective environment. Each such program plan gives rise to different building block and technology requirements, which are analyzed for common need between the NASA and the DoD for each of the alternate world scenarios. An essentially invariant set of system, building block, and technology development plans is presented at the conclusion, intended to allow protection of most of the options for system concepts regardless of what the actual future world environment turns out to be. Thus, building block and technology needs are derived which support: (1) each specific world scenario; (2) all the world scenarios identified in this study; or (3) generalized scenarios applicable to almost any future environment. The output included in this volume consists of the building blocks, i.e.: transportation vehicles, orbital support vehicles, and orbital support facilities; the technology required to support the program plans; identification of their features which could support the DoD and NASA in common; and a complete discussion of the planning methodology.

Biomedical technology transfer: Applications of NASA science and technology

NASA Technical Reports Server (NTRS)

1976-01-01

The major efforts of the Stanford Biomedical Applications Team Program at the Stanford University School of Medicine for the period from October 1, 1975 to September 31, 1976 are covered. A completed EMG biotelemetry system which monitors the physiological signals of man and animals in space related research is discussed. The results of a pilot study involving lower body negative pressure testing in cardiac patients has been completed as well as the design and construction of a new leg negative pressure unit for evaluating heart patients. This technology utilizes vacuum chambers to stress the cardiovascular system during space flight. Laboratory tests of an intracranial pressure transducer, have been conducted. Extremely stable long term data using capacative pressure sensors has lead to the order of commercially manufactured monitoring systems base. Projects involving commercialization are: flexible medical electrodes, an echocardioscope, a miniature biotelemetry system, and an on-line ventricular contour detector.

Operational Risk Assessment for Unmanned Aircraft Vehicles by using Structural Health and Event Management

DTIC Science & Technology

2007-11-01

Since the completion of the program in 2003, OSA-CBM has been merged in MIMOSA consortium. The following areas are covered by the this standard...Data architecture design based on the CRIS data model from MIMOSA . • Implementation guidance among available middleware technologies

Action Research Projects in Pre-Service Teacher Education

ERIC Educational Resources Information Center

Clayton, Courtney; Meadows, George

2013-01-01

Classroom-centered Action Research Projects are an integral component of the M.S. in Elementary Education Program at the University's (pseudonym) College of Education. This article provides a summary and discussion of the projects completed by students in the Science, Technology, Literacy and English Language Learner Specializations of the…

Understanding Academic Performance in Organic Chemistry

ERIC Educational Resources Information Center

Szu, Evan; Nandagopal, Kiruthiga; Shavelson, Richard J.; Lopez, Enrique J.; Penn, John H.; Scharberg, Maureen; Hill, Geannine W.

2011-01-01

Successful completion of organic chemistry is a prerequisite for many graduate and professional programs in science, technology, engineering, and mathematics, yet the failure rate for this sequence of courses is notoriously high. To date, few studies have examined why some students succeed while others have difficulty in organic chemistry. This…

34 CFR 694.22 - What other activities may all GEAR UP projects provide?

Code of Federal Regulations, 2013 CFR

2013-07-01

... curriculum. (f) Providing special programs or tutoring in science, technology, engineering, or mathematics... ensure secondary school completion and postsecondary education enrollment of at-risk children, such as: (1) Identification of at-risk children. (2) After-school and summer tutoring. (3) Assistance to at...

34 CFR 694.22 - What other activities may all GEAR UP projects provide?

Code of Federal Regulations, 2014 CFR

2014-07-01

... curriculum. (f) Providing special programs or tutoring in science, technology, engineering, or mathematics... ensure secondary school completion and postsecondary education enrollment of at-risk children, such as: (1) Identification of at-risk children. (2) After-school and summer tutoring. (3) Assistance to at...

34 CFR 694.22 - What other activities may all GEAR UP projects provide?

Code of Federal Regulations, 2011 CFR

2011-07-01

... curriculum. (f) Providing special programs or tutoring in science, technology, engineering, or mathematics... ensure secondary school completion and postsecondary education enrollment of at-risk children, such as: (1) Identification of at-risk children. (2) After-school and summer tutoring. (3) Assistance to at...

34 CFR 694.22 - What other activities may all GEAR UP projects provide?

Code of Federal Regulations, 2012 CFR

2012-07-01

... curriculum. (f) Providing special programs or tutoring in science, technology, engineering, or mathematics... ensure secondary school completion and postsecondary education enrollment of at-risk children, such as: (1) Identification of at-risk children. (2) After-school and summer tutoring. (3) Assistance to at...

Dual Enrollment--An Opportunity for Acceleration of Education.

ERIC Educational Resources Information Center

DeLuca, James P.

1978-01-01

The chairman of the Department of Graphic Arts and Advertising Technology at New York City Community College describes the department's dual enrollment program, which offers qualified high school seniors the opportunity to take college courses in an occupational curriculum as part-time matriculated college students while completing their high…

USDA area-wide project for annual grasses: outcomes and impacts

USDA-ARS?s Scientific Manuscript database

This document provides a record of the research, outreach, education and technology transfer that was completed as part of the area-wide project for invasive annual grasses from 2007-2012. The overall goal of the project was to catalyze a holistic integrated management program for invasive annual g...

Knowledge at No Cost

ERIC Educational Resources Information Center

Feintuch, Howard

2009-01-01

OpenCourseWare (OCW) program, offered at the Massachusetts Institute of Technology (MIT), provides open access to course materials for a large number of MIT classes. From this resource, American Megan Brewster, a recent graduate working in Guatemala, was able to formulate and implement a complete protocol to tackle Guatemala's need for a plastics…

International Education and Sustainable Development: An American Experience in Bangkok, Venice and Guayaquil.

ERIC Educational Resources Information Center

Hansen, Peter H.

1995-01-01

Describes environmental projects completed by Worcester Polytechnic Institute students in Bangkok, Venice, and Guayaquil as part of a program studying the interaction of science or technology and society. The lessons provide a model for environmental education at other institutions. These interdisciplinary projects promote environmental awareness…

Cockpit voice recognition program at Princeton University

NASA Technical Reports Server (NTRS)

Huang, C. Y.

1983-01-01

Voice recognition technology (VRT) is applied to aeronautics, particularly on the pilot workload alleviation. The VRT does not have to prove its maturity any longer. The feasibility of voice tuning of radio and DME are demonstrated since there are immediate advantages to the pilot and can be completed in a reasonable time.

Materials technology programs in support of a mercury Rankine space power system

NASA Technical Reports Server (NTRS)

Stone, P. L.

1973-01-01

A large portion of the materials technology is summarized that was generated in support of the development of a mercury-rankine space power system (SNAP-8). The primary areas of investigation are: (1) the compatibility of various construction materials with the liquid metals mercury and NaK, (2) the mechanical properties of unalloyed tantalum, and (3) the development of refractory metal/austenitic stainless steel tubing and transition joints. The primary results, conclusions, and state of technology at the completion of this effort for each of these areas are summarized. Results of possible significance to other applications are highlighted.

Experimental Demonstration of Technologies for Autonomous On-Orbit Robotic Assembly

NASA Technical Reports Server (NTRS)

LeMaster, Edward A.; Schaechter, David B.; Carrington, Connie K.

2006-01-01

The Modular Reconfigurable High Energy (MRHE) program aimed to develop technologies for the automated assembly and deployment of large-scale space structures and aggregate spacecraft. Part of the project involved creation of a terrestrial robotic testbed for validation and demonstration of these technologies and for the support of future development activities. This testbed was completed in 2005, and was thereafter used to demonstrate automated rendezvous, docking, and self-assembly tasks between a group of three modular robotic spacecraft emulators. This paper discusses the rationale for the MRHE project, describes the testbed capabilities, and presents the MRHE assembly demonstration sequence.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Albrecht H. Mayer

Asea Brown Boveri (ABB) has completed its technology based program. The results developed under Work Breakdown Structure (WBS) 8, concentrated on technology development and demonstration have been partially implemented in newer turbine designs. A significant improvement in heat rate and power output has been demonstrated. ABB will use the knowledge gained to further improve the efficiency of its Advanced Cycle System, which has been developed and introduced into the marked out side ABB's Advanced Turbine System (ATS) activities. The technology will lead to a power plant design that meets the ATS performance goals of over 60% plant efficiency, decreased electricitymore » costs to consumers and lowest emissions.« less

Ramp Technology and Intelligent Processing in Small Manufacturing

NASA Technical Reports Server (NTRS)

Rentz, Richard E.

1992-01-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Preliminary Results Obtained in Integrated Safety Analysis of NASA Aviation Safety Program Technologies

NASA Technical Reports Server (NTRS)

Reveley, Mary S.

2003-01-01

The goal of the NASA Aviation Safety Program (AvSP) is to develop and demonstrate technologies that contribute to a reduction in the aviation fatal accident rate by a factor of 5 by the year 2007 and by a factor of 10 by the year 2022. Integrated safety analysis of day-to-day operations and risks within those operations will provide an understanding of the Aviation Safety Program portfolio. Safety benefits analyses are currently being conducted. Preliminary results for the Synthetic Vision Systems (SVS) and Weather Accident Prevention (WxAP) projects of the AvSP have been completed by the Logistics Management Institute under a contract with the NASA Glenn Research Center. These analyses include both a reliability analysis and a computer simulation model. The integrated safety analysis method comprises two principal components: a reliability model and a simulation model. In the reliability model, the results indicate how different technologies and systems will perform in normal, degraded, and failed modes of operation. In the simulation, an operational scenario is modeled. The primary purpose of the SVS project is to improve safety by providing visual-flightlike situation awareness during instrument conditions. The current analyses are an estimate of the benefits of SVS in avoiding controlled flight into terrain. The scenario modeled has an aircraft flying directly toward a terrain feature. When the flight crew determines that the aircraft is headed toward an obstruction, the aircraft executes a level turn at speed. The simulation is ended when the aircraft completes the turn.

Ramp technology and intelligent processing in small manufacturing

NASA Astrophysics Data System (ADS)

Rentz, Richard E.

1992-04-01

To address the issues of excessive inventories and increasing procurement lead times, the Navy is actively pursuing flexible computer integrated manufacturing (FCIM) technologies, integrated by communication networks to respond rapidly to its requirements for parts. The Rapid Acquisition of Manufactured Parts (RAMP) program, initiated in 1986, is an integral part of this effort. The RAMP program's goal is to reduce the current average production lead times experienced by the Navy's inventory control points by a factor of 90 percent. The manufacturing engineering component of the RAMP architecture utilizes an intelligent processing technology built around a knowledge-based shell provided by ICAD, Inc. Rules and data bases in the software simulate an expert manufacturing planner's knowledge of shop processes and equipment. This expert system can use Product Data Exchange using STEP (PDES) data to determine what features the required part has, what material is required to manufacture it, what machines and tools are needed, and how the part should be held (fixtured) for machining, among other factors. The program's rule base then indicates, for example, how to make each feature, in what order to make it, and to which machines on the shop floor the part should be routed for processing. This information becomes part of the shop work order. The process planning function under RAMP greatly reduces the time and effort required to complete a process plan. Since the PDES file that drives the intelligent processing is 100 percent complete and accurate to start with, the potential for costly errors is greatly diminished.

Remote programming of MED-EL cochlear implants: users' and professionals' evaluation of the remote programming experience.

PubMed

Kuzovkov, Vladislav; Yanov, Yuri; Levin, Sergey; Bovo, Roberto; Rosignoli, Monica; Eskilsson, Gunnar; Willbas, Staffan

2014-07-01

Remote programming is safe and is well received by health-care professionals and cochlear implant (CI) users. It can be adopted into clinic routine as an alternative to face-to-face programming. Telemedicine allows a patient to be treated anywhere in the world. Although it is a growing field, little research has been published on its application to CI programming. We examined hearing professionals' and CI users' subjective reactions to the remote programming experience, including the quality of the programming and the use of the relevant technology. Remote CI programming was performed in Italy, Sweden, and Russia. Programming sessions had three participants: a CI user, a local host, and a remote expert. After the session, each CI user, local host, and remote expert each completed a questionnaire on their experience. In all, 33 remote programming sessions were carried out, resulting in 99 completed questionnaires. The overwhelming majority of study participants responded positively to all aspects of remote programming. CI users were satisfied with the results in 96.9% of the programming sessions; 100% of participants would use remote programming again. Although technical problems were encountered, they did not cause the sessions to be considerably longer than face-to-face sessions.

NREL/SCE High Penetration PV Integration Project: FY13 Annual Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mather, B. A.; Shah, S.; Norris, B. L.

2014-06-01

In 2010, the National Renewable Energy Laboratory (NREL), Southern California Edison (SCE), Quanta Technology, Satcon Technology Corporation, Electrical Distribution Design (EDD), and Clean Power Research (CPR) teamed to analyze the impacts of high penetration levels of photovoltaic (PV) systems interconnected onto the SCE distribution system. This project was designed specifically to benefit from the experience that SCE and the project team would gain during the installation of 500 megawatts (MW) of utility-scale PV systems (with 1-5 MW typical ratings) starting in 2010 and completing in 2015 within SCE's service territory through a program approved by the California Public Utility Commissionmore » (CPUC). This report provides the findings of the research completed under the project to date.« less

Philippine Astronomy Convention 2009 Abstract: Program Offerings in Astronomy in the Philippines

NASA Astrophysics Data System (ADS)

Torres, J. R. F.

2009-03-01

The formal academic programs in Astronomy of the Rizal Technological University are the first such programs in the Philippines. The Master of Science in Astronomy program is envisioned to provide the student with a wide range of knowledge in many areas of Astronomy, leaning towards the descriptive aspects of knowledge. The student will choose the field or research most suitable to his or her interests. Three of these researches done while enrolled in the program, and even researches completed before the student actually enrolled in the program, may be considered as his or her thesis. The program suits professionals in all persuasions who wish to study Astronomy either for professional advancement or plainly for the love of the science or for intellectual satisfaction. Non-science majors can enroll. In 2008, the RTU Graduate School decided to ladderize the MS program and the Graduate Diploma in Astronomy was designed. This program is suited for science educators, astronomy lecturers and entrepreneurs, members of astronomical societies, and plain astronomy enthusiasts who like to gain in-depth knowledge in the most important aspects of astronomy. A bachelor's degree in any field is required. The program can be finished in two semesters and one summer. If the student opts to continue in the MS in Astronomy program, all the courses he or she has earned in the Diploma will be credited. The Bachelor of Science in Astronomy Technology is an intensive baccalaureate degree program designed to prepare students to become future research scientists and technologists in the field of Astronomy. The BS in Astronomy Technology is a cross-fertilized program, integrating interrelated sciences, such as engineering, geology, remote sensing, physics, atmospheric and environmental science, biology and biochemistry, and even philosophy and entrepreneurship into the study. Thus, the B.S. in Astronomy Technology program gives the student excellent job opportunities in many fields.

User preferences for a text message-based smoking cessation intervention.

PubMed

Bock, Beth C; Heron, Kristin E; Jennings, Ernestine G; Magee, Joshua C; Morrow, Kathleen M

2013-04-01

Younger adults are more likely to smoke and less likely to seek treatment than older smokers. They are also frequent users of communication technology. In the current study, we conducted focus groups to obtain feedback about preferences for a text message-based smoking cessation program from potential users. Participants (N = 21, M age = 25.6 years, age range = 20-33 years) were current or recently quit smokers (M cigarettes/day = 12.8) who used text messaging. Participants completed questionnaires and participated in a 2-hour focus group. Focus groups were conducted using an a priori semistructured interview guide to promote discussion of the content and functionality of the intervention. Major themes from analysis of the focus groups included support for the acceptability of a text-based cessation program, suggestions for a more technologically broad-based program, and adjustments to the program structure. Participants recommended including social networking functions, user control of program output through an online profile, and text message features to promote interaction with the system. Interestingly, many participants suggested the program should begin on individuals' identified quit day, challenging the procedures used in most cessation programs, which begin by preparing participants for a future quit date. Overall, younger adult smokers appear to be interested in participating in a smoking cessation program that uses text messages and web-based elements. Qualitative feedback regarding the perceived optimal features and structure of a technology-based intervention challenged traditional methods of implementing smoking cessation interventions and will inform the development of future programs.

How does non-formal marine education affect student attitude and knowledge? A case study using SCDNR's Discovery program

NASA Astrophysics Data System (ADS)

McGovern, Mary Francis

Non-formal environmental education provides students the opportunity to learn in ways that would not be possible in a traditional classroom setting. Outdoor learning allows students to make connections to their environment and helps to foster an appreciation for nature. This type of education can be interdisciplinary---students not only develop skills in science, but also in mathematics, social studies, technology, and critical thinking. This case study focuses on a non-formal marine education program, the South Carolina Department of Natural Resources' (SCDNR) Discovery vessel based program. The Discovery curriculum was evaluated to determine impact on student knowledge about and attitude toward the estuary. Students from two South Carolina coastal counties who attended the boat program during fall 2014 were asked to complete a brief survey before, immediately after, and two weeks following the program. The results of this study indicate that both student knowledge about and attitude significantly improved after completion of the Discovery vessel based program. Knowledge and attitude scores demonstrated a positive correlation.

Outsourcing an Effective Postdischarge Call Program

PubMed Central

Meek, Kevin L.; Williams, Paula; Unterschuetz, Caryn J.

2018-01-01

To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge. PMID:29494453

Pressure Ulcer Prevention: Where Practice and Education Meet.

PubMed

Bos, Brenda S; Wangen, Tina M; Elbing, Carl E; Rowekamp, Debra J; Kruggel, Heather A; Conlon, Patricia M; Scroggins, Leann M; Schad, Shauna P; Neumann, Julie A; Barth, Melissa M; Grubbs, Pamela L; Sievers, Beth A

2016-01-01

This article describes the processes used to implement a pressure ulcer management program in a Midwest academic medical center, which led to a decrease in reportable pressure ulcers. A learning needs assessment was completed, and a workgroup was formed to address the learning needs. Methods, materials, and processes included lectures, technology-enhanced learning, and interactive stations with mannequins and pressure ulcer moulages. The processes and outcome measures used to measure effectiveness of the program are discussed.

Software attribute visualization for high integrity software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-03-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification.

Strategic Computing Computer Vision: Taking Image Understanding To The Next Plateau

NASA Astrophysics Data System (ADS)

Simpson, R. L., Jr.

1987-06-01

The overall objective of the Strategic Computing (SC) Program of the Defense Advanced Research Projects Agency (DARPA) is to develop and demonstrate a new generation of machine intelligence technology which can form the basis for more capable military systems in the future and also maintain a position of world leadership for the US in computer technology. Begun in 1983, SC represents a focused research strategy for accelerating the evolution of new technology and its rapid prototyping in realistic military contexts. Among the very ambitious demonstration prototypes being developed within the SC Program are: 1) the Pilot's Associate which will aid the pilot in route planning, aerial target prioritization, evasion of missile threats, and aircraft emergency safety procedures during flight; 2) two battle management projects one for the for the Army, which is just getting started, called the AirLand Battle Management program (ALBM) which will use knowledge-based systems technology to assist in the generation and evaluation of tactical options and plans at the Corps level; 3) the other more established program for the Navy is the Fleet Command Center Battle Management Program (FCCBIVIP) at Pearl Harbor. The FCCBMP is employing knowledge-based systems and natural language technology in a evolutionary testbed situated in an operational command center to demonstrate and evaluate intelligent decision-aids which can assist in the evaluation of fleet readiness and explore alternatives during contingencies; and 4) the Autonomous Land Vehicle (ALV) which integrates in a major robotic testbed the technologies for dynamic image understanding, knowledge-based route planning with replanning during execution, hosted on new advanced parallel architectures. The goal of the Strategic Computing computer vision technology base (SCVision) is to develop generic technology that will enable the construction of complete, robust, high performance image understanding systems to support a wide range of DoD applications. Possible applications include autonomous vehicle navigation, photointerpretation, smart weapons, and robotic manipulation. This paper provides an overview of the technical and program management plans being used in evolving this critical national technology.

Development of an Antimicrobial Stewardship-based Infectious Diseases Elective that Incorporates Human Patient Simulation Technology

PubMed Central

Meyer, Susan M.

2014-01-01

Objective. To design an elective for pharmacy students that facilitates antimicrobial stewardship awareness, knowledge, and skill development by solving clinical cases, using human patient simulation technology. Design. The elective was designed for PharmD students to describe principles and functions of stewardship programs, select, evaluate, refine, or redesign patient-specific plans for infectious diseases in the context of antimicrobial stewardship, and propose criteria and stewardship management strategies for an antimicrobial class at a health care institution. Teaching methods included active learning and lectures. Cases of bacterial endocarditis and cryptococcal meningitis were developed that incorporated human patient simulation technology. Assessment. Forty-five pharmacy students completed an antimicrobial stewardship elective between 2010 and 2013. Outcomes were assessed using student perceptions of and performance on rubric-graded assignments. Conclusion. A PharmD elective using active learning, including novel cases conducted with human patient simulation technology, enabled outcomes consistent with those desired of pharmacists assisting in antimicrobial stewardship programs. PMID:25386016

Contracts for field projects and supporting research on enhanced oil recovery. Progress review number 83, quarter ending June 30, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

Summaries of 41 research projects on enhanced recovery are presented under the following sections: (1) chemical flooding; (2) gas displacement; (3) thermal recovery; (4) geoscience technology; (5) resource assessment technology; and (6) reservoir classes. Each presentation gives the title of the project, contract number, research facility, contract date, expected completion data, amount of the award, principal investigator, and DOE program manager, and describes the objectives of the project and a summary of the technical progress.

Hyper-X Stage Separation: Background and Status

NASA Technical Reports Server (NTRS)

Reubush, David E.

1999-01-01

This paper provides an overview of stage separation activities for NASA's Hyper-X program; a focused hypersonic technology effort designed to move hypersonic, airbreathing vehicle technology from the laboratory environment to the flight environment. This paper presents an account of the development of the current stage separation concept, highlights of wind tunnel experiments and computational fluid dynamics investigations being conducted to define the separation event, results from ground tests of separation hardware, schedule and status. Substantial work has been completed toward reducing the risk associated with stage separation.

An integrated environment for tactical guidance research and evaluation

NASA Technical Reports Server (NTRS)

Goodrich, Kenneth H.; Mcmanus, John W.

1990-01-01

NASA-Langley's Tactical Guidance Research and Evaluation System (TGRES) constitutes an integrated environment for the development of tactical guidance algorithms and evaluating the effects of novel technologies; the modularity of the system allows easy modification or replacement of system elements in order to conduct evaluations of alternative technologies. TGRES differs from existing systems in its capitalization on AI programming techniques for guidance-logic implementation. Its ability to encompass high-fidelity, six-DOF simulation models will facilitate the analysis of complete aircraft dynamics.

UI Review Results and NARAC Response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, J.; Eme, B.; Kim, S.

2017-03-08

This report describes the results of an inter-program design review completed February 16th, 2017, during the second year of a FY16-FY18 NA-84 Technology Integration (TI) project to modernize the core software system used in DOE/NNSA's National Atmospheric Release Advisory Center (NARAC, narac.llnl.gov). This review focused on the graphical user interfaces (GUI) frameworks. Reviewers (described in Appendix 2) were selected from multiple areas of the LLNL Computation directorate, based on their expertise in GUI and Web technologies.

Adherence to Technology-Based Exercise Programs in Older Adults: A Systematic Review.

PubMed

Valenzuela, Trinidad; Okubo, Yoshiro; Woodbury, Ashley; Lord, Stephen R; Delbaere, Kim

Exercise participation and adherence in older people is often low. The integration of technology-based exercise programs may have a positive effect on adherence as they can overcome perceived barriers to exercise. Previous systematic reviews have shown preliminary evidence that technology-based exercise programs can improve physical functioning. However, there is currently no in-depth description and discussion of the potential this technology offers to improve exercise adherence in older people. This review examines the literature regarding older adults' acceptability and adherence to technology-based exercise interventions. A comprehensive systematic database search for randomized controlled trials, clinical controlled trials, and parallel group trials was performed, including MEDLINE, PsycINFO, EMBASE, CINAHL, EMB Reviews, and Cochrane Library, completed in May 2015. Trials reporting adherence to technology-based exercise programs aimed at improving physical function were included. Adherence was defined as the percentage of exercise sessions attended out of the total number of sessions prescribed. Twenty-two studies were included. The mean cohort age range was 67 to 86 years. Studies were conducted in research facilities, aged care facilities, and people's homes. Ten studies compared outcomes between technology-based and traditional exercise programs. Adherence to both types of interventions was high (median 91.25% and 83.58%, respectively). Adherence was higher for technology-based interventions than traditional interventions independent of study site, level of supervision, and delivery mode. The majority of the studies used commercially available gaming technologies, and both types of exercise interventions were mostly supervised. A lack of detailed reporting of adherence and the pilot nature of most studies did not allow computation of a comprehensive adherence rate. This systematic review provides evidence that technology offers a well-accepted method to provide older adults with engaging exercise opportunities, and adherence rates remain high in both supervised and unsupervised settings at least throughout the first 12 weeks of intervention. The higher adherence rates to technology-based interventions can be largely explained by the high reported levels of enjoyment when using these programs. However, the small sample sizes, short follow-up periods, inclusion of mostly healthy older people, and problems related to the methods used to report exercise adherence limit the generalizability of our findings. This systematic review indicates that technology-based exercise interventions have good adherence and may provide a sustainable means of promoting physical activity and preventing falls in older people. More research is required to investigate the feasibility, acceptability, and effectiveness of technology-based exercise programs undertaken by older people at home over extended trial periods.

An On-line Technology Information System (OTIS) for Advanced Life Support

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Boulanger, Richard; Hogan, John A.; Rodriquez, Luis

2003-01-01

OTIS is an on-line communication platform designed for smooth flow of technology information between advanced life support (ALS) technology developers, researchers, system analysts, and managers. With pathways for efficient transfer of information, several improvements in the ALS Program will result. With OTIS, it will be possible to provide programmatic information for technology developers and researchers, technical information for analysts, and managerial decision support. OTIS is a platform that enables the effective research, development, and delivery of complex systems for life support. An electronic data collection form has been developed for the solid waste element, drafted by the Solid Waste Working Group. Forms for other elements (air revitalization, water recovery, food processing, biomass production and thermal control) will also be developed, based on lessons learned from the development of the solid waste form. All forms will be developed by consultation with other working groups, comprised of experts in the area of interest. Forms will be converted to an on-line data collection interface that technology developers will use to transfer information into OTIS. Funded technology developers will log in to OTIS annually to complete the element- specific forms for their technology. The type and amount of information requested expands as the technology readiness level (TRL) increases. The completed forms will feed into a regularly updated and maintained database that will store technology information and allow for database searching. To ensure confidentiality of proprietary information, security permissions will be customized for each user. Principal investigators of a project will be able to designate certain data as proprietary and only technical monitors of a task, ALS Management, and the principal investigator will have the ability to view this information. The typical OTIS user will be able to read all non-proprietary information about all projects.Interaction with the database will occur over encrypted connections, and data will be stored on the server in an encrypted form. Implementation of OTIS will initiate a community-accessible repository of technology development information. With OTIS, ALS element leads and managers will be able to carry out informed technology selection for programmatic decisions. OTIS will also allow analysts to make accurate evaluations of technology options. Additionally, the range and specificity of information solicited will help educate technology developers of program needs. With augmentation, OTIS reporting is capable of replacing the current fiscal year-end reporting process. Overall, the system will enable more informed R&TD decisions and more rapid attainment of ALS Program goals.

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City

PubMed Central

Gonzalez, Miriam L.; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M.; Lowther, Deborah L.; Relyea, George; Caniza, Miguela A.

2017-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs’ satisfaction. Pearson’s chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs’ e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries. PMID:29147140

Measuring readiness for and satisfaction with a hand hygiene e-learning course among healthcare workers in a paediatric oncology centre in Guatemala City.

PubMed

Gonzalez, Miriam L; Melgar, Mario; Homsi, Maysam; Shuler, Ana; Antillon-Klussmann, Federico; Matheu, Laura; Ramirez, Marylin; Grant, Michael M; Lowther, Deborah L; Relyea, George; Caniza, Miguela A

2016-01-01

E-learning has been widely used in the infection control field and has been recommended for use in hand hygiene (HH) programs by the World Health Organization. Such strategies are effective and efficient for infection control, but factors such as learner readiness for this method should be determined to assure feasibility and suitability in low- to middle-income countries. We developed a tailored, e-learning, Spanish-language HH course based on the WHO guidelines for HH in healthcare settings for the pediatric cancer center in Guatemala City. We aimed to identify e-readiness factors that influenced HH course completion and evaluate HCWs' satisfaction. Pearson's chi-square test of independence was used to retrospectively compare e-readiness factors and course-completion status (completed, non-completed, and never-started). We surveyed 194 HCWs for e-readiness; 116 HCWs self-enrolled in the HH course, and 55 responded to the satisfaction survey. Most e-readiness factors were statistically significant between course-completion groups. Moreover, students were significantly more likely to complete the course if they had a computer with an Internet connection (P=0.001) and self-reported comfort with using a computer several times a week (p=0.001) and communicating through online technologies (p=0.001). Previous online course experience was not a significant factor (p=0.819). E-readiness score averages varied among HCWs, and mean scores for all e-readiness factors were significantly higher among medical doctors than among nurses. Nearly all respondents to the satisfaction survey agreed that e-learning was as effective as the traditional teaching method. Evaluating HCWs' e-readiness is essential while integrating technologies into educational programs in low- to middle-income countries.

KSC All Hands

NASA Image and Video Library

2018-01-11

Lisa Colloredo, deputy program manager for the Commercial Crew Program, speaks to Kennedy Space Center employees about plans for the coming year. The event took place in the Lunar Theater at the Kennedy Space Center Visitor Complex’s Apollo Saturn V Center. The year will be highlighted with NASA's partners preparing test flights for crewed missions to the International Space Station as part of the agency's Commercial Crew Program and six launches by the Launch Services Program. Exploration Ground Systems will be completing facilities to support the Space Launch System rocket and Orion spacecraft. Exploration Research and Technology Programs will continue to provide supplies to the space station launched as part of the Commercial Resupply Services effort.

NASA airframe structural integrity program

NASA Technical Reports Server (NTRS)

Harris, Charles E.

1991-01-01

NASA has initiated a research program with the long-term objective of supporting the aerospace industry in addressing issues related to the aging commercial transport fleet. The interdisciplinary program combines advanced fatigue crack growth prediction methodology with innovative nondestructive examination technology with the focus on multi-site damage (MSD) at riveted connections. A fracture mechanics evaluation of the concept of pressure proof testing the fuselage to screen for MSD has been completed. Also, a successful laboratory demonstration of the ability of the thermal flux method to detect disbonds at riveted lap splice joints has been conducted. All long-term program elements have been initiated and the plans for the methodology verification program are being coordinated with the airframe manufacturers.

NASA airframe structural integrity program

NASA Technical Reports Server (NTRS)

Harris, Charles E.

1990-01-01

NASA initiated a research program with the long-term objective of supporting the aerospace industry in addressing issues related to the aging of the commercial transport fleet. The program combines advanced fatigue crack growth prediction methodology with innovative nondestructive examination technology with the focus on multi-stage damage (MSD) at rivited connections. A fracture mechanics evaluation of the concept of pressure proof testing the fuselage to screen for MSD was completed. A successful laboratory demonstration of the ability of the thermal flux method to detect disbonds at rivited lap splice joints was conducted. All long-term program elements were initiated, and the plans for the methodology verification program are being coordinated with the airframe manufacturers.

NASA X-34 Technology in Motion

NASA Technical Reports Server (NTRS)

Beech, Geoffrey; Chandler, Kristie

1997-01-01

The X-34 technology development program is a joint industry/government project to develop, test, and operate a small, fully-reusable hypersonic flight vehicle. The objective is to demonstrate key technologies and operating concepts applicable to future reusable launch vehicles. Integrated in the vehicle are various systems to assure successful completion of mission objectives, including the Main Propulsion System (MPS). NASA-Marshall Space Flight Center (MSFC) is responsible for developing the X-34's MPS including the design and complete build package for the propulsion system components. The X-34 will be powered by the Fastrac Engine, which is currently in design and development at NASA-MSFC. Fastrac is a single-stage main engine, which burns a mixture of liquid oxygen (LOX) and kerosene(RP-1). The interface between the MPS and Fastrac engine are critical for proper system operation and technologies applicable to future reusable launch vehicles. Deneb's IGRIP software package with the Dynamic analysis option provided a key tool for conducting studies critical to this interface as well as a mechanism to drive the design of the LOX and RP-1 feedlines. Kinematic models were created for the Fastrac Engine and the feedlines for various design concepts. Based on the kinematic simulation within Envision, design and joint limits were verified and system interference controlled. It was also critical to the program to evaluate the effect of dynamic loads visually, providing a verification tool for dynamic analysis and in some cases uncovering areas that had not been considered. Deneb's software put the X-34 technology in motion and has been a key factor in facilitating the strenuous design schedule.

The SMART Platform: early experience enabling substitutable applications for electronic health records.

PubMed

Mandl, Kenneth D; Mandel, Joshua C; Murphy, Shawn N; Bernstam, Elmer Victor; Ramoni, Rachel L; Kreda, David A; McCoy, J Michael; Adida, Ben; Kohane, Isaac S

2012-01-01

The Substitutable Medical Applications, Reusable Technologies (SMART) Platforms project seeks to develop a health information technology platform with substitutable applications (apps) constructed around core services. The authors believe this is a promising approach to driving down healthcare costs, supporting standards evolution, accommodating differences in care workflow, fostering competition in the market, and accelerating innovation. The Office of the National Coordinator for Health Information Technology, through the Strategic Health IT Advanced Research Projects (SHARP) Program, funds the project. The SMART team has focused on enabling the property of substitutability through an app programming interface leveraging web standards, presenting predictable data payloads, and abstracting away many details of enterprise health information technology systems. Containers--health information technology systems, such as electronic health records (EHR), personally controlled health records, and health information exchanges that use the SMART app programming interface or a portion of it--marshal data sources and present data simply, reliably, and consistently to apps. The SMART team has completed the first phase of the project (a) defining an app programming interface, (b) developing containers, and (c) producing a set of charter apps that showcase the system capabilities. A focal point of this phase was the SMART Apps Challenge, publicized by the White House, using http://www.challenge.gov website, and generating 15 app submissions with diverse functionality. Key strategic decisions must be made about the most effective market for further disseminating SMART: existing market-leading EHR vendors, new entrants into the EHR market, or other stakeholders such as health information exchanges.

Environmental Assessment Expanded Ponnequin Wind Energy Project Weld County, Colorado

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

1999-03-02

The U.S.Department of Energy (DOE) has considered a proposal from the State of Colorado, Office of Energy Conservation (OEC), for funding construction of the Expanded Ponnequin Wind Project in Weld County, Colorado. OEC plans to enter into a contracting arrangement with Public Service Company of Colorado (PSCO) for the completion of these activities. PSCo, along with its subcontractors and business partners, are jointly developing the Expanded Ponnequin Wind Project. DOE completed an environmental assessment of the original proposed project in August 1997. Since then, the geographic scope and the design of the project changed, necessitating additional review of the projectmore » under the National Environmental Policy Act. The project now calls for the possible construction of up to 48 wind turbines on State and private lands. PSCo and its partners have initiated construction of the project on private land in Weld County, Colorado. A substation, access road and some wind turbines have been installed. However, to date, DOE has not provided any funding for these activities. DOE, through its Commercialization Ventures Program, has solicited applications for financial assistance from state energy offices, in a teaming arrangement with private-sector organizations, for projects that will accelerate the commercialization of emerging renewable energy technologies. The Commercialization Ventures Program was established by the Renewable Energy and Energy Efficiency Technology Competitiveness Act of 1989 (P.L. 101-218) as amended by the Energy Policy Act of 1992 (P.L. 102-486). The Program seeks to assist entry into the marketplace of newly emerging renewable energy technologies, or of innovative applications of existing technologies. In short, an emerging renewable energy technology is one which has already proven viable but which has had little or no operational experience. The Program is managed by the Department of Energy, Office of Energy Efficiency and Renewable Energy. The Federal action triggering the preparation of this EA is the need for DOE to decide whether to release the requested funding to support the construction of the Expanded Ponnequin Wind Project. The purpose of this Final Environmental Assessment (EA) is to provide DOE and the public with information on potential environmental impacts associated with the Expanded Ponnequin Wind Energy Project. This EA, and public comments received on it, were used in DOE's deliberations on whether to release funding for the expanded project under the Commercialization Ventures Program.« less

Professional Master's degree in Nursing: knowledge production and challenges

PubMed Central

Munari, Denize Bouttelet; Parada, Cristina Maria Garcia de Lima; Gelbcke, Francine de Lima; Silvino, Zenith Rosa; Ribeiro, Luana Cássia Miranda; Scochi, Carmen Gracinda Silvan

2014-01-01

Objective to analyze the production of knowledge resulting from the professional master's degree programs in Nursing and to reflect about their perspectives for the area. Method descriptive and analytical study. Data collected from the dissertations of three educational institutions that graduated students in programs of professional master's degree in Nursing between 2006 and 2012 were included. Results most of the 127 course completion studies analyzed were developed within hospital contexts; there was a focus on the organizational and healthcare areas, in the research fields care process and management, and predominance of qualitative studies. There are various products resulting from the course completion studies: evaluation of services/healthcare programs and development of processes, care or educational protocols. Conclusion the programs of professional master's degree in Nursing, which are undergoing a consolidation stage, have recent production under development and there is a gap in the creation of hard technologies and innovation. They are essential for the development of innovative professional practices that articulate the healthcare and educational areas. PMID:26107826

Dynamic visualization techniques for high consequence software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pollock, G.M.

1998-02-01

This report documents a prototype tool developed to investigate the use of visualization and virtual reality technologies for improving software surety confidence. The tool is utilized within the execution phase of the software life cycle. It provides a capability to monitor an executing program against prespecified requirements constraints provided in a program written in the requirements specification language SAGE. The resulting Software Attribute Visual Analysis Tool (SAVAnT) also provides a technique to assess the completeness of a software specification. The prototype tool is described along with the requirements constraint language after a brief literature review is presented. Examples of howmore » the tool can be used are also presented. In conclusion, the most significant advantage of this tool is to provide a first step in evaluating specification completeness, and to provide a more productive method for program comprehension and debugging. The expected payoff is increased software surety confidence, increased program comprehension, and reduced development and debugging time.« less

Saudi Arabia's experience in solar energy applications

NASA Astrophysics Data System (ADS)

Huraib, Fahad S.

The progress in solar energy research in Saudi Arabia is discussed with emphasis on the efforts of a government research entity - King Adbulaziz City for Science and Technology (KACST). Three programs currently underway at KACST are considered: the continuation of activities initiated under the Solar Energy Research American/Saudi (SOLERAS) program, a Saudi/German program, and projects developed and conducted completely by KACST. The objectives, management structure, and program organization of SOLEARS are outlined, and attention is focused on urban, rural/agricultural, and industrial applications as well as resource development activities and accomplishments. Solar-hydrogen projects pursued together with Germany are reviewed, and their objectives, program management, and technical plans are covered. Domestic programs dealing with photovoltaic-powered lightning and hot-water systems are summarized.

Teaching Principles of Economics without "Chalk and Talk": The Experience of CNU Online.

ERIC Educational Resources Information Center

Vachris, Michelle Albert

1999-01-01

Discusses the Christopher Newport University (Virginia) [CNU] online program in which students can complete their general education required courses and earn four-year undergraduate degrees online. Addresses the effects of technology on students and the problems encountered in an online environment. Includes reactions by George Bredon and Howard…

Studies and Reports Relating to Training and Education, FY 1968.

ERIC Educational Resources Information Center

Civil Service Commission, Washington, DC.

The 1968 directory of Federal training and education programs has been compiled to encourage wider use of findings by other agencies, to avoid duplication of research efforts, and to stimulate experimentation needed to keep pace with technological progress. Federal agencies report both completed and in-progress studies and include such agencies as…

SITE EMERGING TECHNOLOGY SUMMARY: INTEGRATION OF PHOTOCATALYTIC OXIDATION WITH AIR STRIPPING OF CONTAMINATED AQUIFERS

EPA Science Inventory

In a recently completed test program, bench-scale laboratory studies at Arizona State University (ASU) in Tempe, AZ, and pilot-scale studies in a simulated field test situation at Zentox Corp in Ocala, FL, were performed to evaluate the integration of gas-solid ultraviolet (UV) p...

Printing/Graphic Arts Technology. Curriculum Guide. Invest in Success.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

Under the Idaho state system for curriculum development in vocational education, Technical Committees made up solely of industry personnel are responsible for drawing up task lists for each program. A Technical Committee Report is prepared on completion of the Committee's assignment. This report presents a task list that reflects current trends…

Technology Exchange

Science.gov Websites

ARC Automotive Research Center Home Page HOME PAGE ABOUT ARC ▼ Overview of the ARC Education Partners Visit Us NEWS & EVENTS ▼ Events Calendar Annual Program Review Research Seminar Press Room Archives RESEARCH ▼ Research Areas Ongoing Projects Completed Projects SOFTWARE CONTACT ▼ Primary

Digital Native and Digital Immigrant Use of Scholarly Network for Doctoral Learners

ERIC Educational Resources Information Center

Berman, Ronald; Hassell, Deliesha

2014-01-01

The Doctoral Community Network (DC) is a learner driven, scholarly community designed to help online doctoral learners successfully complete their dissertation and program of study. While digital natives grew up in an environment immersed in technology, digital immigrants adapted to this environment through their ability to learn and adjust to…

Dedicated to Their Degrees: Adult Transfer Students in Engineering Baccalaureate Programs

ERIC Educational Resources Information Center

Allen, Taryn Ozuna; Zhang, Yi

2016-01-01

Objective: Increasing degree completion in science, technology, engineering, and mathematics (STEM) fields, particularly engineering, is a national priority. With an aspiration to increase the number of STEM graduates by one million in the next 10 years, more research is needed to understand the role of community colleges in achieving this…

Schiller's Rotten Apples and the Larger Mission of FIT.

ERIC Educational Resources Information Center

Feldman, Marvin

1987-01-01

Describes the Fashion Institute of Technology's (FIT's) 2 + 2 curriculum, in which students complete an associate degree in applied science degree before applying for selective admission to a baccalaureate program. Considers the relevance of creativity to the mission of FIT. Quotes well-known creative people about the sources of creativity and the…

Industrial Arts--Metals Technology: A Curriculum Guide for Intermediate and Secondary Level Programs.

ERIC Educational Resources Information Center

Missouri Council for Industrial Arts Education.

The curriculum outline is designed to aid the instructor in developing a more complete course of study, for intermediate and secondary school students, to give the student an understanding of some of the tools, materials, processes, products, occupational opportunities, requirements, and working conditions associated with the metal and metal…

The Technical School: College and University Interface in Teaching Fiber, Textile, and Polymer Chemistry

ERIC Educational Resources Information Center

Roberts, Carleton W.

1973-01-01

Discusses the present status of technician and technology-oriented institutions and the two curricula offered by the Textile Department, Clemson University. Indicates that technical school, junior college, and community college graduates are allowed to complete formal training to the four-year degree level in the Clemson program. (CC)

[Operation/Maintenance of Fiber Placement Machine

NASA Technical Reports Server (NTRS)

Pelham, L.; Dillard, T.

2000-01-01

NASA contract NAS8-39749 was completed in January 2000. The contract period of performance covered six (6) years and included basic program technical support as required by NASA with up to thirty (30) different technical directives identified and issued by NASA for specific Advanced Composite Technology tasks during the course of the contract.

Small Systems. Instructor Guide. Working for Clean Water: An Information Program for Advisory Groups.

ERIC Educational Resources Information Center

Cole, Charles A.

The rehabilitation of existing on-site wastewater treatment facilities is often the best approach to meeting waste disposal needs. Upon completing the learning session described in this instructor's guide, participants should understand the technology and treatment methods for low-volume wastewater flows. These materials are part of the Working…

Origins Space Telescope: Science Case and Design Reference Mission for Concept 1

NASA Astrophysics Data System (ADS)

Meixner, Margaret; Cooray, Asantha; Pope, Alexandra; Armus, Lee; Vieira, Joaquin Daniel; Milam, Stefanie N.; Melnick, Gary; Leisawitz, David; Staguhn, Johannes G.; Bergin, Edwin; Origins Space Telescope Science and Technology Definition Team

2018-01-01

The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies of NASA Headquarters for the 2020 Astronomy and Astrophysics Decadal survey. The science case for OST covers four themes: Tracing the Signature of Life and the Ingredients of Habitable Worlds; Charting the Rise of Metals, Dust and the First Galaxies, Unraveling the Co-evolution of Black Holes and Galaxies and Understanding Our Solar System in the Context of Planetary System Formation. Using a set of proposed observing programs from the community, we estimate a design reference mission for OST mission concept 1. The mission will complete significant programs in these four themes and have time for other programs from the community. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. We welcome you to contact the Science and Technology Definition Team (STDT) with your science needs and ideas by emailing us at ost_info@lists.ipac.caltech.edu.

Regenerative Fuel Cell System Testbed Program for Government and Commercial Applications

NASA Technical Reports Server (NTRS)

1996-01-01

NASA Lewis Research Center's Electrochemical Technology Branch has led a multiagency effort to design, fabricate, and operate a regenerative fuel cell (RFC) system testbed. Key objectives of this program are to evaluate, characterize, and demonstrate fully integrated RFC's for space, military, and commercial applications. The Lewis-led team is implementing the program through a unique international coalition that encompasses both Government and industry participants. Construction of the 25-kW RFC testbed at the NASA facility at Edwards Air Force Base was completed in January 1995, and the system has been operational since that time.

Joint University Program for Air Transportation Research, 1988-1989

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1990-01-01

The research conducted during 1988 to 1989 under the NASA/FAA-sponsored Joint University Program for Air Transportation Research is summarized. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and annotated bibliographies are presented for research topics, which include computer science, guidance and control theory and practice, aircraft performance, flight dynamics, and applied experimental psychology. An overview of the year's activities for each university is also presented.

DOE/JPL advanced thermionic technology program

NASA Technical Reports Server (NTRS)

1980-01-01

Accomplishments in the DOE program include: continuing stable output from the combustion life test of the one-inch diameter hemispherical silicon carbine diode (Converter No. 239) at an emitter temperature of 1730 K for a period of over 4200 hours; construction of four diode module completed; favorable results obtained from TAM combustor-gas turbine system analyses; and obtained a FERP work function of 2.3 eV with the W(100)-O-Zr-C electrode. JPL program accomplishments include: the average minimum barrier index of the last six research diodes built with sublimed molybdenum oxide collectors was 20 eV (WHK).

Outsourcing an Effective Postdischarge Call Program: A Collaborative Approach.

PubMed

Meek, Kevin L; Williams, Paula; Unterschuetz, Caryn J

To improve patient satisfaction ratings and decrease readmissions, many organizations utilize internal staff to complete postdischarge calls to recently released patients. Developing, implementing, monitoring, and sustaining an effective call program can be challenging and have eluded some of the renowned medical centers in the country. Using collaboration with an outsourced vendor to bring state-of-the-art call technology and staffed with specially trained callers, health systems can achieve elevated levels of engagement and satisfaction for their patients postdischarge.

Commercial Generic Bioprocessing Apparatus Science Insert - 03

NASA Technical Reports Server (NTRS)

Moreno, Nancy; Stodieck, Louis; Cushing, Paula; Stowe, Mark; Hamilton, Mary Ann; Werner, Ken

2008-01-01

Commercial Generic Bioprocessing Apparatus Science Insert - 03 (CSI-03) is the third set of investigations in the CSI program series. The CSI program provides the K-12 community opportunities to utilize the unique microgravity environment of the International Space Station as part of the regular classroom to encourage learning and interest in science, technology, engineering and math. CSI-03 will examine the complete life cycle of the painted lady butterfly and the ability of an orb weaving spider to spin a web, eat and remain healthy in space.

Building America Systems Integration Research Annual Report. FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gestwick, Michael

2013-05-01

This Building America FY2012 Annual Report includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

National Defense Education Program (NDEP) - Science, Technology, Engineering, and Mathematics (STEM) Education

DTIC Science & Technology

2013-09-01

reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of...EDUCATION 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA8650-10-2-1743 5c. PROGRAM ELEMENT NUMBER N /A 6. AUTHOR(S) Shannon M. Cox and Sandra M...Preiss 5d. PROJECT NUMBER N /A 5e. TASK NUMBER N /A 5f. WORK UNIT NUMBER N /A 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING

TECHNOLOGY ASSESSMENT IN HOSPITALS: LESSONS LEARNED FROM AN EMPIRICAL EXPERIMENT.

PubMed

Foglia, Emanuela; Lettieri, Emanuele; Ferrario, Lucrezia; Porazzi, Emanuele; Garagiola, Elisabetta; Pagani, Roberta; Bonfanti, Marzia; Lazzarotti, Valentina; Manzini, Raffaella; Masella, Cristina; Croce, Davide

2017-01-01

Hospital Based Health Technology Assessment (HBHTA) practices, to inform decision making at the hospital level, emerged as urgent priority for policy makers, hospital managers, and professionals. The present study crystallized the results achieved by the testing of an original framework for HBHTA, developed within Lombardy Region: the IMPlementation of A Quick hospital-based HTA (IMPAQHTA). The study tested: (i) the HBHTA framework efficiency, (ii) feasibility, (iii) the tool utility and completeness, considering dimensions and sub-dimensions. The IMPAQHTA framework deployed the Regional HTA program, activated in 2008 in Lombardy, at the hospital level. The relevance and feasibility of the framework were tested over a 3-year period through a large-scale empirical experiment, involving seventy-four healthcare professionals organized in different HBHTA teams for assessing thirty-two different technologies within twenty-two different hospitals. Semi-structured interviews and self-reported questionnaires were used to collect data regarding the relevance and feasibility of the IMPAQHTA framework. The proposed HBHTA framework proved to be suitable for application at the hospital level, in the Italian context, permitting a quick assessment (11 working days) and providing hospital decision makers with relevant and quantitative information. Performances in terms of feasibility, utility, completeness, and easiness proved to be satisfactory. The IMPAQHTA was considered to be a complete and feasible HBHTA framework, as well as being replicable to different technologies within any hospital settings, thus demonstrating the capability of a hospital to develop a complete HTA, if supported by adequate and well defined tools and quantitative metrics.

Research utilization in the building industry: decision model and preliminary assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Watts, R.L.; Johnson, D.R.; Smith, S.A.

1985-10-01

The Research Utilization Program was conceived as a far-reaching means for managing the interactions of the private sector and the federal research sector as they deal with energy conservation in buildings. The program emphasizes a private-public partnership in planning a research agenda and in applying the results of ongoing and completed research. The results of this task support the hypothesis that the transfer of R and D results to the buildings industry can be accomplished more efficiently and quickly by a systematic approach to technology transfer. This systematic approach involves targeting decision makers, assessing research and information needs, properly formatingmore » information, and then transmitting the information through trusted channels. The purpose of this report is to introduce elements of a market-oriented knowledge base, which would be useful to the Building Systems Division, the Office of Buildings and Community Systems and their associated laboratories in managing a private-public research partnership on a rational systematic basis. This report presents conceptual models and data bases that can be used in formulating a technology transfer strategy and in planning technology transfer programs.« less

Relationship among science teacher personality characteristics and degree of teacher classroom implementation after in-service workshop

NASA Astrophysics Data System (ADS)

Sechler, Phares Lochiel Coleman

State departments of public instruction require that teachers periodically update their licenses throughout their teaching careers. Various professional development events such as in-service workshops, university offerings, and special innovative programs provide opportunities for novice and experienced teachers to grow professionally. The "Team Science" workshop was designed from models supported by research that described guidelines for successful workshop strategies. In evaluating the workshop, the question was asked "Why did not all teachers implement the ideas from the workshop in their science classrooms?" This study investigates the possible relationship between teacher personality characteristics and implementation of technology innovations. Team Science was an extensive workshop program planned to develop science teachers' expertise in using computer and video technology to teach in physical science, chemistry, and physics classrooms in rural school in North Carolina. Upon evaluating the four-year effort, it was found that the 23 participants implemented the technological strategies at various levels. At the higher end of the range of technology use, some teachers exhibited complete integration of the computers and interfacing devices into both the laboratory work and the classroom inquiry. At the lower end of the range, some teachers used the technology very little. The resulting question emerged from the data collected: Do specific teacher personality characteristics (independent variables) correlate with the degree of implementation (dependent variable) of the innovative ideas and tools used in the teacher's science classroom after the in-service workshop? To determine if there were any significant personality traits, each teacher was given five personality tests. The tests were Hunt's Conceptual Development Test, the Paragraph Completion Test; James Rest's Defining Issues Test; Simmons Personal Survey, an emotional tendency test; the Myers-Briggs Type Indicator; and Riggs and Enochs Self-Efficacy Test. The data were analyzed using descriptive statistics, multiple regression, and factor analysis to see what variables were predictors of implementation. The regression analysis revealed that subtests from Myers-Briggs Type Indicator, Simmons Personal Survey, Hunt's Paragraph Completion Test, and Rest's Defining Issues Test could be used to predict implementation. Factor analysis indicated teachers who implemented the technology were "risk takers" and "flexible planners."

Outcomes and Processes in the Meyerhoff Scholars Program: STEM PhD Completion, Sense of Community, Perceived Program Benefit, Science Identity, and Research Self-Efficacy.

PubMed

Maton, Kenneth I; Beason, Tiffany S; Godsay, Surbhi; Sto Domingo, Mariano R; Bailey, TaShara C; Sun, Shuyan; Hrabowski, Freeman A

2016-01-01

Previous research has shown that the Meyerhoff Scholars Program at the University of Maryland, Baltimore County, is an effective intervention for high-achieving underrepresented minority (URM) students; African-American Meyerhoff students are significantly more likely to enter science, technology, engineering, and mathematics (STEM) PhD programs than comparison students. The first of two studies in this report extends the prior research by examining levels of PhD completion for Meyerhoff (N = 479) versus comparison sample (N = 249) students among the first 16 cohorts. Entering African-American Meyerhoff students were 4.8 times more likely to complete STEM PhDs than comparison sample students. To enhance understanding of potential mechanisms of influence, the second study used data from the 22nd (Fall 2010) to 25th (Fall 2013) cohorts (N = 109) to test the hypothesis that perceived program benefit at the end of freshman year would mediate the relationship between sense of community at the end of Summer Bridge and science identity and research self-efficacy at the end of sophomore year. Study 2 results indicated that perceived program benefit fully mediated the relationship between sense of community and both criterion measures. The findings underscore the potential of comprehensive STEM intervention programs to enhance PhD completion, and suggest mechanisms of influence. © 2016 K. I. Maton et al. CBE—Life Sciences Education © 2016 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

Nevada Test Site-Directed Research and Development, FY 2007 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wil Lewis, editor

2008-02-20

The Nevada Test Site-Directed Research and Development (SDRD) program completed a very successful year of research and development activities in FY 2007. Twenty-nine new projects were selected for funding this year, and eight projects started in FY 2006 were brought to conclusion. The total funds expended by the SDRD program were $5.67 million, for an average per-project cost of $153 thousand. An external audit conducted in September 2007 verified that appropriate accounting practices were applied to the SDRD program. Highlights for the year included: programmatic adoption of 8 SDRD-developed technologies; the filing of 9 invention disclosures for innovation evolving frommore » SDRD projects; participation in the tri-Lab Laboratory Directed Research and Development (LDRD) and SDRD Symposium that was broadly attended by Nevada Test Site (NTS), National Nuclear Security Administration (NNSA), LDRD, U.S. Department of Homeland Security (DHS), and U.S. Department of Defense (DoD) representatives; peer reviews of all FY 2007 projects; and the successful completion of 37 R&D projects, as presented in this report. In response to a company-wide call, authors throughout the NTS complex submitted 182 proposals for FY 2007 SDRD projects. The SDRD program has seen a dramatic increase in the yearly total of submitted proposals--from 69 in FY 2002 to 182 this year--while the number of projects funded has actually decreased from a program high of 57 in FY 2004. The overall effect of this trend has helped ensure an increasingly competitive program that benefited from a broader set of innovative ideas, making project selection both challenging and rewarding. Proposals were evaluated for technical merit, including such factors as innovation, probability of success, potential benefit, and mission applicability. Authors and reviewers benefited from the use of a shortfalls list entitled the 'NTS Technology Needs Assessment' that was compiled from NTS, National Weapons Laboratory (NWL), and NNSA sources. This tool continues to be of considerable value in aligning the SDRD program with mission priorities, and was expanded in FY 2007 to include technology development needs from the DHS and other agencies with missions closely aligned to that of the NTS.« less

Integrated agricultural energy system

NASA Astrophysics Data System (ADS)

Taylor, R. M.

1985-08-01

The purpose of this program is to show New England farmers and other New England energy users how they can use alternative energy sources to reduce their energy cost and dependency on conventional sources. The project demonstrates alternative energy technologies in solar, alcohol and methane. Dissemination is planned through tours to be conducted by the Worcester County Extension Service. Most of these goals were completed as planned. A few things have yet to be completed. The solar panels and solar hot water tanks have to be installed. The fermenter's agitating and cooling system have to be secured inside the fermenter. Once these items are complete tours will begin early in the spring.

Near Zero Emissions at 50 Percent Thermal Efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

2012-12-31

Detroit Diesel Corporation (DDC) has successfully completed a 10 year DOE sponsored heavy-duty truck engine program, hereafter referred to as the NZ-50 program. This program was split into two major phases. The first phase was called Near-Zero Emission at 50 Percent Thermal Efficiency, and was completed in 2007. The second phase was initiated in 2006, and this phase was named Advancements in Engine Combustion Systems to Enable High-Efficiency Clean Combustion for Heavy-Duty Engines. This phase was completed in September, 2010. The key objectives of the NZ-50 program for this first phase were to: Quantify thermal efficiency degradation associated with reductionmore » of engine-out NOx emissions to the 2007 regulated level of ~1.1 g/hp-hr. Implement an integrated analytical/experimental development plan for improving subsystem and component capabilities in support of emerging engine technologies for emissions and thermal efficiency goals of the program. Test prototype subsystem hardware featuring technology enhancements and demonstrate effective application on a multi-cylinder, production feasible heavy-duty engine test-bed. Optimize subsystem components and engine controls (calibration) to demonstrate thermal efficiency that is in compliance with the DOE 2005 Joule milestone, meaning greater than 45% thermal efficiency at 2007 emission levels. Develop technology roadmap for meeting emission regulations of 2010 and beyond while mitigating the associated degradation in engine fuel consumption. Ultimately, develop technical prime-path for meeting the overall goal of the NZ-50 program, i.e., 50% thermal efficiency at 2010 regulated emissions. These objectives were successfully met during the course of the NZ-50 program. The most noteworthy achievements in this program are summarized as follows: Demonstrated technologies through advanced integrated experiments and analysis to achieve the technical objectives of the NZ-50 program with 50.2% equivalent thermal efficiency under EPA 2010 emissions regulations. Experimentally demonstrate brake efficiency of 48.5% at EPA 2010 emission level at single steady-state point. Analytically demonstrated additional brake efficiency benefits using advanced aftertreatment configuration concept and air system enhancement including, but not limited to, turbo-compound, variable valve actuator system, and new cylinder head redesign, thus helping to achieve the final program goals. Experimentally demonstrated EPA 2010 emissions over FTP cycles using advanced integrated engine and aftertreatment system. These aggressive thermal efficiency and emissions results were achieved by applying a robust systems technology development methodology. It used integrated analytical and experimental tools for subsystem component optimization encompassing advanced fuel injection system, increased EGR cooling capacity, combustion process optimization, and advanced aftertreatment technologies. Model based controls employing multiple input and output techniques enabled efficient integration of the various subsystems and ensured optimal performance of each system within the total engine package. . The key objective of the NZ-50 program for the second phase was to explore advancements in engine combustion systems using high-efficiency clean combustion (HECC) techniques to minimize cylinder-out emissions, targeting a 10% efficiency improvement. The most noteworthy achievements in this phase of the program are summarized as follows: Experimentally and analytically evaluated numerous air system improvements related to the turbocharger and variable valve actuation. Some of the items tested proved to be very successful and modifications to the turbine discovered in this program have since been incorporated into production hardware. The combustion system development continued with evaluation of various designs of the 2-step piston bowl. Significant improvements in engine emissions have been obtained, but fuel economy improvements have been tougher to realize. Development of a neural network control system progressed to the point that the system was fully functional and showing significant fuel economy gains in transient engine testing. Development of the QuantLogic injector with the capability of both a hollow cone spray during early injection and conventional diesel injection at later injection timings was undertaken and proved to be problematic. This injector was designed to be a key component in a PCCI combustion system, but this innovative fuel injector required significantly more development effort than this programâ's resources or timing would allow.« less

Technology pedagogy: Six teacher candidates' developing pedagogical models for the use of computers in science instruction

NASA Astrophysics Data System (ADS)

Myhre, Oddmund Reidar

1997-12-01

This study investigated how teacher candidates' developing pedagogical beliefs and knowledge of technology influenced their perception of such tools in the teaching of subject matter as they complete the initial course work of their professional program. The purpose of the study was to conceptualize more clearly the relationship between prospective teachers' thinking about computer technology and the content of their professional education. A case study methodology was used to investigate changes in six pre-service secondary science teachers' thinking about technology as a pedagogical tool. Two of the teachers had extensive experience with technology upon entering the teacher preparation course-work, whereas the other four were novice computer users. Data included three semi structured interviews and non-participant observations during the technology course-work. Additional data were collected in the form of interviews with university faculty and cooperating teachers. Analysis of these data indicated that prospective candidates entered teacher education viewing technology as a tool that supports a teacher centered classroom. As the candidates explored more student centered approaches to teaching, they found less room for technology in their images of their future practice. The data also indicated that the technology course-work was isolated from the rest of the teacher education program and many of the misconceptions about technology that the candidates brought to their professional preparation were left unchallenged.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjoreen, Terrence P

The Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD) Program reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2A, 'Laboratory Directed Research and Development' (January 8, 2001), which establishes DOE's requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report describes all ORNL LDRD research activities supported during FY 2005 and includes final reports for completed projects and shorter progress reports for projects thatmore » were active, but not completed, during this period. The FY 2005 ORNL LDRD Self-Assessment (ORNL/PPA-2006/2) provides financial data about the FY 2005 projects and an internal evaluation of the program's management process. ORNL is a DOE multiprogram science, technology, and energy laboratory with distinctive capabilities in materials science and engineering, neutron science and technology, energy production and end-use technologies, biological and environmental science, and scientific computing. With these capabilities ORNL conducts basic and applied research and development (R&D) to support DOE's overarching national security mission, which encompasses science, energy resources, environmental quality, and national nuclear security. As a national resource, the Laboratory also applies its capabilities and skills to the specific needs of other federal agencies and customers through the DOE Work For Others (WFO) program. Information about the Laboratory and its programs is available on the Internet at . LDRD is a relatively small but vital DOE program that allows ORNL, as well as other multiprogram DOE laboratories, to select a limited number of R&D projects for the purpose of: (1) maintaining the scientific and technical vitality of the Laboratory; (2) enhancing the Laboratory's ability to address future DOE missions; (3) fostering creativity and stimulating exploration of forefront science and technology; (4) serving as a proving ground for new research; and (5) supporting high-risk, potentially high-value R&D. Through LDRD the Laboratory is able to improve its distinctive capabilities and enhance its ability to conduct cutting-edge R&D for its DOE and WFO sponsors. To meet the LDRD objectives and fulfill the particular needs of the Laboratory, ORNL has established a program with two components: the Director's R&D Fund and the Seed Money Fund. As outlined in Table 1, these two funds are complementary. The Director's R&D Fund develops new capabilities in support of the Laboratory initiatives, while the Seed Money Fund is open to all innovative ideas that have the potential for enhancing the Laboratory's core scientific and technical competencies. Provision for multiple routes of access to ORNL LDRD funds maximizes the likelihood that novel and seminal ideas with scientific and technological merit will be recognized and supported.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sjoreen, Terrence P

The Oak Ridge National Laboratory (ORNL) Laboratory Directed Research and Development (LDRD) Program reports its status to the U.S. Department of Energy (DOE) in March of each year. The program operates under the authority of DOE Order 413.2A, 'Laboratory Directed Research and Development' (January 8, 2001), which establishes DOE's requirements for the program while providing the Laboratory Director broad flexibility for program implementation. LDRD funds are obtained through a charge to all Laboratory programs. This report describes all ORNL LDRD research activities supported during FY 2004 and includes final reports for completed projects and shorter progress reports for projects thatmore » were active, but not completed, during this period. The FY 2004 ORNL LDRD Self-Assessment (ORNL/PPA-2005/2) provides financial data about the FY 2004 projects and an internal evaluation of the program's management process. ORNL is a DOE multiprogram science, technology, and energy laboratory with distinctive capabilities in materials science and engineering, neutron science and technology, energy production and end-use technologies, biological and environmental science, and scientific computing. With these capabilities ORNL conducts basic and applied research and development (R&D) to support DOE's overarching national security mission, which encompasses science, energy resources, environmental quality, and national nuclear security. As a national resource, the Laboratory also applies its capabilities and skills to the specific needs of other federal agencies and customers through the DOE Work For Others (WFO) program. Information about the Laboratory and its programs is available on the Internet at . LDRD is a relatively small but vital DOE program that allows ORNL, as well as other multiprogram DOE laboratories, to select a limited number of R&D projects for the purpose of: (1) maintaining the scientific and technical vitality of the Laboratory; (2) enhancing the Laboratory's ability to address future DOE missions; (3) fostering creativity and stimulating exploration of forefront science and technology; (4) serving as a proving ground for new research; and (5) supporting high-risk, potentially high-value R&D. Through LDRD the Laboratory is able to improve its distinctive capabilities and enhance its ability to conduct cutting-edge R&D for its DOE and WFO sponsors. To meet the LDRD objectives and fulfill the particular needs of the Laboratory, ORNL has established a program with two components: the Director's R&D Fund and the Seed Money Fund. As outlined in Table 1, these two funds are complementary. The Director's R&D Fund develops new capabilities in support of the Laboratory initiatives, while the Seed Money Fund is open to all innovative ideas that have the potential for enhancing the Laboratory's core scientific and technical competencies. Provision for multiple routes of access to ORNL LDRD funds maximizes the likelihood that novel and seminal ideas with scientific and technological merit will be recognized and supported.« less

The Vocational Training FacilityAn Interactive Learning Program to Return Persons With Physical Disabilities to Employment.

PubMed

Hammel, J M; Van Der Loos, H F; Lepage, P; Burgar, C; Perkash, I; Shafer, D; Topp, E; Lees, D

1994-01-01

This paper describes the results of the program-development phase of the Vocational Training Facility (VTF) taking place at the Palo Alto Veterans Affairs Medical Center Rehabilitation Research and Development Center. The VTF staff has developed a self-paced, multimedia curriculum comprised of adapted training packages, interactive videos, and additional training and testing materials designed to teach entry-level desktop publishing and reasonable accommodation skills to individuals with spinal cord injuries. The curriculum is taught via the Macintosh™ computer to allow independent, "hands-off" access to training materials. Each student is given an integrated workstation that is equipped with the Desktop Vocational Assistant Robot (De VAR); a set of low-and high-technology assistive hardware, software, and devices; and ergonomic furniture and adaptations customized to fit individual learning and access needs. Each student completes a 12-week, full-time training program followed by a 3-month internship with a local corporate sponsor. This paper summarizes the evaluation results of the VTF program by the first nine students, with spinal cord injuries ranging paraplegia to high-level quadriplegia, who have completed the program.

Oceanography and Geoscience Scholars at Texas A&M University Funded through the NSF S-STEM (Scholarships in Science, Technology, Engineering and Mathematics) Program

NASA Astrophysics Data System (ADS)

Richardson, M. J.; Gardner, W. D.

2016-02-01

Over the last seven years we have led the creation and implementation of the Oceanography and Geoscience Scholars programs at Texas A&M University. Through these programs we have been able to provide scholarship support for 92 undergraduates in Geosciences and 29 graduate students in Oceanography. Fifty-seven undergraduate scholars have graduated in Geosciences: 30 undergraduate students in Meteorology, 7 in Geology, and 20 in Environmental Geosciences. Two students have graduated in other STEM disciplines. Twenty-four students are in the process of completing their undergraduate degrees in STEM disciplines. Twenty-three students have graduated with MS or PhD degrees in Oceanography and five PhD students are completing their dissertations. As specified in the program solicitation all of the scholars are academically talented students with demonstrated financial need as defined by the FAFSA (Free Application for Federal Student Aid). We have endeavored to recruit students from underrepresented groups. One-third of the undergraduate scholars were from underrepresented groups; 28% of the graduate students. We will present the challenges and successes of these programs.

Hanford science and technology needs statements document

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piper, L.L.

This document is a compilation of the Hanford science and technology needs statements for FY 1998. The needs were developed by the Hanford Site Technology Coordination Group (STCG) with full participation and endorsement of site user organizations, stakeholders, and regulators. The purpose of this document is to: (a) provide a comprehensive listing of Hanford science and technology needs, and (b) identify partnering and commercialization opportunities with industry, other federal and state agencies, and the academic community. The Hanford STCG reviews and updates the needs annually. Once completed, the needs are communicated to DOE for use in the development and prioritizationmore » of their science and technology programs, including the Focus Areas, Cross-Cutting Programs, and the Environmental Management Science Program. The needs are also transmitted to DOE through the Accelerating Cleanup: 2006 Plan. The public may access the need statements on the Internet on: the Hanford Home Page (www.hanford.gov), the Pacific Rim Enterprise Center`s web site (www2.pacific-rim.org/pacific rim), or the STCG web site at DOE headquarters (em-52.em.doegov/ifd/stcg/stcg.htm). This page includes links to science and technology needs for many DOE sites. Private industry is encouraged to review the need statements and contact the Hanford STCG if they can provide technologies that meet these needs. On-site points of contact are included at the ends of each need statement. The Pacific Rim Enterprise Center (206-224-9934) can also provide assistance to businesses interested in marketing technologies to the DOE.« less

International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

This artist's digital concept depicts the completely assembled International Space Station (ISS) passing over Florida. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

This artist's concept depicts the completely assembled International Space Station (ISS) passing over the Straits of Gibraltar and the Mediterranean Sea. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

International Space Station

NASA Technical Reports Server (NTRS)

1998-01-01

This artist's concept depicts the completely assembled International Space Station (ISS) passing over Florida and the Bahamas. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating in the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

International Space Station (ISS)

NASA Image and Video Library

1998-01-01

This artist's concept depicts the completely assembled International Space Station (ISS) passing over Florida and the Bahamas. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating in the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

International Space Station (ISS)

NASA Image and Video Library

1998-01-01

This artist's digital concept depicts the completely assembled International Space Station (ISS) passing over Florida. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

Impacting the Science Community through Teacher Development: Utilizing Virtual Learning.

PubMed

Boulay, Rachel; van Raalte, Lisa

2014-01-01

Commitment to the STEM (science, technology, engineering, math) pipeline is slowly declining despite the need for professionals in the medical field. Addressing this, the John A. Burns School of Medicine developed a summer teacher-training program with a supplemental technology-learning component to improve science teachers' knowledge and skills of Molecular Biology. Subsequently, students' skills, techniques, and application of molecular biology are impacted. Science teachers require training that will prepare them for educating future professionals and foster interest in the medical field. After participation in the program and full access to the virtual material, twelve high school science teachers completed a final written reflective statement to evaluate their experiences. Using thematic analysis, knowledge and classroom application were investigated in this study. Results were two-fold: teachers identified difference areas of gained knowledge from the teacher-training program and teachers' reporting various benefits in relation to curricula development after participating in the program. It is concluded that participation in the program and access to the virtual material will impact the science community by updating teacher knowledge and positively influencing students' experience with science.

A quantitative analysis of factors that influence and predict students' intention to major in and complete an undergraduate program in STEM or non-STEM

NASA Astrophysics Data System (ADS)

Yang, Xuemei

2005-11-01

The goal of this study was to explore and understand the factors that influence students' intention to major in and complete an undergraduate program in a science, technology, engineering, or mathematics (STEM) discipline, in a non-STEM field, and how students' gender directly and indirectly affects their success in college. A quantitative study of three thousand four (3004) ACT-tested students who entered a Midwestern, land-grant university as freshmen in fall, 1999 was conducted based on their ACT Assessment information and their enrollment and graduation status after five years. A wide variety of variables were considered and logistic regression, factor analysis, and path analysis were used to analyze the data. The results show that students who intended to major in or completed STEM programs generally have better academic qualifications than their counterparts who intended to major in non-STEM fields. Students who intended to major in or completed STEM programs came from lower income families and smaller communities than those who intended to major in or graduated from non-STEM programs. In this study, gender's direct effect on students' college achievement is eleven times the total of gender's indirect effects through several major factors for students in both STEM fields and non-STEM fields. Perhaps nature has favored females when students' achievement is measured as their college GPA. The results also show that the overall high dropout rate is strongly associated with students' inadequate preparation in high school and family income. Out-of-school accomplishment in community service is a negative influence on their completion of a college degree. ACT scores are not necessary for prediction of college graduation.

Teachers' perceptions of effective science, technology, and mathematics professional development and changes in classroom practices

NASA Astrophysics Data System (ADS)

Boriack, Anna Christine

The purpose of this study is to examine teachers' perceptions of professional development and changes in classroom practice. A proposed conceptual framework for effective professional development that results in changes in classroom practices was developed. Data from two programs that provided professional development to teachers in the areas of technology, mathematics, and science was used to inform the conceptual framework. These two programs were Target Technology in Texas (T3) and Mathematics, Science, and Technology Teacher Preparation Academies (MSTTPA). This dissertation used a multiple article format to explore each program separately, yet the proposed conceptual framework allowed for comparisons to be made between the two programs. The first study investigated teachers' perceptions of technology-related professional development after their districts had received a T3 grant. An online survey was administrated to all teachers to determine their perceptions of technology-related professional development along with technology self-efficacy. Classroom observations were conducted to determine if teachers were implementing technology. The results indicated that teachers did not perceive professional development as being effective and were not implementing technology in their classrooms. Teachers did have high technology self-efficacy and perceived adequate school support, which implies that effective professional development may be a large factor in whether or not teachers implement technology in their classrooms. The second study evaluated participants' perceptions of the effectiveness of mathematics and science professional development offered through a MSTTP academy. Current and former participants completed an online survey which measured their perceptions of academy activities and school environment. Participants also self-reported classroom implementation of technology. Interviews and open-ended survey questions were used to provide further insight into academy activities. The results indicated that academy participants perceived effective academy activities along with a supportive school environment. Additionally, participants reported sometimes implementing technology in their classrooms. These findings suggest that several factors might influence the successful classroom implementation of professional development. The data which supports the conceptual framework shows that effective professional development may play a key role in successful classroom implementation. Future professional development activities should be designed around characteristics for effective professional development to increase the likelihood that classroom implementation might occur.

Integration of NASA Research into Undergraduate Education in Math, Science, Engineering and Technology at North Carolina A&T State University

NASA Technical Reports Server (NTRS)

Monroe, Joseph; Kelkar, Ajit

2003-01-01

The NASA PAIR program incorporated the NASA-Sponsored research into the undergraduate environment at North Carolina Agricultural and Technical State University. This program is designed to significantly improve undergraduate education in the areas of mathematics, science, engineering, and technology (MSET) by directly benefiting from the experiences of NASA field centers, affiliated industrial partners and academic institutions. The three basic goals of the program were enhancing core courses in MSET curriculum, upgrading core-engineering laboratories to compliment upgraded MSET curriculum, and conduct research training for undergraduates in MSET disciplines through a sophomore shadow program and through Research Experience for Undergraduates (REU) programs. Since the inception of the program nine courses have been modified to include NASA related topics and research. These courses have impacted over 900 students in the first three years of the program. The Electrical Engineering circuit's lab is completely re-equipped to include Computer controlled and data acquisition equipment. The Physics lab is upgraded to implement better sensory data acquisition to enhance students understanding of course concepts. In addition a new instrumentation laboratory in the department of Mechanical Engineering is developed. Research training for A&T students was conducted through four different programs: Apprentice program, Developers program, Sophomore Shadow program and Independent Research program. These programs provided opportunities for an average of forty students per semester.

Opportunities for technology-based HIV prevention programming among high school students in Cape Town, South Africa

PubMed Central

Mwaba, Kelvin; Prescott, Tonya L.; Roman, Nicolette V.; Rooi, Bronwyn; Bull, Sheana

2014-01-01

One in three new cases of HIV in South Africa is among adolescents. Given that adolescents are particularly affected, scalable and cost-effective prevention programs are urgently needed. This study aims to identify opportunities to integrate technology into youth HIV prevention efforts. In 2012, 1,107 8th – 11th graders completed a paper-and-pencil survey. Respondents were enrolled in one of three public high schools in Langa. Because it is the closest black township to Cape Town, Langa has the highest density of people in the region. Eighty-nine percent of respondents have used text messaging (SMS) and 86% have gone online. If an HIV prevention program was offered online, 66% of youth would be somewhat or extremely likely to access it; slightly fewer (55%) felt the same about SMS-based programming. In comparison, 85% said they would be somewhat or extremely likely to access a school-based HIV prevention program. Interest in Internet-(60%) and SMS-based (54%) HIV prevention programming was similar for youth who had a self-appraised risk for HIV compared to youth who appraised their risk to be lower, as it was for youth who were tired of hearing messages about HIV prevention. Technology use is common – even among high school students who live in lower income communities. At the same time, these data reveal that it is not uncommon for youth to be tired of hearing messages about HIV prevention, and many of the typical topics key to HIV prevention have low interest levels among youth. HIV prevention researchers need to be mindful of the extent of existing programming that youth are exposed to. Technology-based programming may be especially amenable to meeting these requirements because of its novelty especially in developing countries, and because interactive functionality can be easily integrated into the program design. Given the preference for school- and Internet-based programming, it seems that a hybrid approach is likely feasible and acceptable. PMID:25022287

Opportunities for technology-based HIV prevention programming among high school students in Cape Town, South Africa.

PubMed

Ybarra, Michele L; Mwaba, Kelvin; Prescott, Tonya L; Roman, Nicolette V; Rooi, Bronwyn; Bull, Sheana

2014-01-01

One in three new cases of HIV in South Africa is among adolescents. Given that adolescents are particularly affected, scalable, and cost-effective prevention programs are urgently needed. This study aims to identify opportunities to integrate technology into youth HIV prevention efforts. In 2012, 1107 8th-11th graders completed a paper-and-pencil survey. Respondents were enrolled in one of three public high schools in Langa, a lower income community in Cape Town, South Africa. Eighty-nine percent of respondents have used text messaging (SMS) and 86% have gone online. If an HIV prevention program was offered online, 66% of youth would be somewhat or extremely likely to access it; slightly fewer (55%) felt the same about SMS-based programming. In comparison, 85% said they would be somewhat or extremely likely to access a school-based HIV prevention program. Interest in Internet- (60%) and SMS-based (54%) HIV prevention programming was similar for youth who had a self-appraised risk of HIV compared to youth who appraised their risk to be lower, as it was for youth who were tired of hearing messages about HIV prevention. Technology use is common - even among high school students who live in lower income communities. At the same time, these data reveal that it is not uncommon for youth to be tired of hearing messages about HIV prevention, and many of the typical topics key to HIV prevention have low interest levels among youth. HIV prevention researchers need to be mindful of the extent of existing programming that youth are exposed to. Technology-based programming may be especially amenable to meeting these requirements because of its novelty especially in developing countries, and because interactive functionality can be easily integrated into the program design. Given the preference for school- and Internet-based programming, it seems that a hybrid approach is likely feasible and acceptable.

NASA's Space Launch System Takes Shape: Progress Toward Safe, Affordable, Exploration

NASA Technical Reports Server (NTRS)

Askins, Bruce R.; Robinson, Kimberly F.

2014-01-01

Development of NASA's Space Launch System (SLS) exploration-class heavy lift rocket has moved from the formulation phase to implementation in 3 years and will make significant progress this year toward its first launch, slated December 2017. SLS represents a safe, affordable, and evolutionary path to development of an unprecedented capability for future human and robotic exploration and use of space. For the United States current development is focused on a configuration with a 70 metric ton (t) payload to low Earth orbit (LEO), more than double any operational vehicle. This version will launch NASA's Orion Multi-Purpose Crew Vehicle (MPCV) on its first autonomous flight beyond the Moon and back, as well as the first crewed Orion flight. SLS is designed to evolve to a 130 t lift capability that can reduce mission costs, simplify payload design, reduce trip times, and lower overall risk. Each vehicle element completed its respective Preliminary Design Reviews, followed by the SLS Program. The Program also completed the Key Decision Point-C milestone to move from formulation to implementation in 2014. NASA hasthorized the program to proceed to Critical Design Review, scheduled for 2015. Accomplihments to date include: manufacture of core stage test hardware, as well as preparations for testing the world's most powerful solid rocket boosters and main engines that flew 135 successful Space Shuttle missions. The Program's success to date is due to prudent use of existing technology, infrastructure, and workforce; streamlined management approach; and judicious use of new technologies. This paper will discuss SLS Program successes over the past year and examine milestones and challenges ahead. The SLS Program and its elements are managed at NASA's Marshall Space Flight Center (MSFC).

Clean Coal Technology Demonstration Program: Project fact sheets 2000, status as of June 30, 2000

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2000-09-01

The Clean Coal Technology Demonstration Program (CCT Program), a model of government and industry cooperation, responds to the Department of Energy's (DOE) mission to foster a secure and reliable energy system that is environmentally and economically sustainable. The CCT Program represents an investment of over $5.2 billion in advanced coal-based technology, with industry and state governments providing an unprecedented 66 percent of the funding. With 26 of the 38 active projects having completed operations, the CCT Program has yielded clean coal technologies (CCTs) that are capable of meeting existing and emerging environmental regulations and competing in a deregulated electric powermore » marketplace. The CCT Program is providing a portfolio of technologies that will assure that U.S. recoverable coal reserves of 274 billion tons can continue to supply the nation's energy needs economically and in an environmentally sound manner. As the nation embarks on a new millennium, many of the clean coal technologies have realized commercial application. Industry stands ready to respond to the energy and environmental demands of the 21st century, both domestically and internationally, For existing power plants, there are cost-effective environmental control devices to control sulfur dioxide (S02), nitrogen oxides (NO,), and particulate matter (PM). Also ready is a new generation of technologies that can produce electricity and other commodities, such as steam and synthetic gas, and provide efficiencies and environmental performance responsive to global climate change concerns. The CCT Program took a pollution prevention approach as well, demonstrating technologies that remove pollutants or their precursors from coal-based fuels before combustion. Finally, new technologies were introduced into the major coal-based industries, such as steel production, to enhance environmental performance. Thanks in part to the CCT Program, coal--abundant, secure, and economical--can continue in its role as a key component in the U.S. and world energy markets. The CCT Program also has global importance in providing clean, efficient coal-based technology to a burgeoning energy market in developing countries largely dependent on coal. Based on 1997 data, world energy consumption is expected to increase 60 percent by 2020, with almost half of the energy increment occurring in developing Asia (including China and India). By 2020, energy consumption in developing Asia is projected to surpass consumption in North America. The energy form contributing most to the growth is electricity, as developing Asia establishes its energy infrastructure. Coal, the predominant indigenous fuel, in that region will be the fuel of choice in electricity production. The CCTs offer a means to mitigate potential environmental problems associated with unprecedented energy growth, and to enhance the U.S. economy through foreign equipment sales and engineering services.« less

NEXT Ion Propulsion System Development Status and Capabilities

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Benson, Scott W.

2008-01-01

NASA s Evolutionary Xenon Thruster (NEXT) project is developing next generation ion propulsion technologies to provide future NASA science missions with enhanced mission performance benefit at a low total development cost. The objective of the NEXT project is to advance next generation ion propulsion technology by producing engineering model system components, validating these through qualification-level and integrated system testing, and ensuring preparedness for transitioning to flight system development. As NASA s Evolutionary Xenon Thruster technology program completes advanced development activities, it is advantageous to review the existing technology capabilities of the system under development. This paper describes the NEXT ion propulsion system development status, characteristics and performance. A review of mission analyses results conducted to date using the NEXT system is also provided.

Drug checking: a potential solution to the opioid overdose epidemic?

PubMed

Bardwell, Geoff; Kerr, Thomas

2018-05-25

North America is experiencing an overdose epidemic driven in part by the proliferation of illicitly-manufactured fentanyl and related analogues. In response, communities are scaling up novel overdose prevention interventions. Included are drug checking technologies. Drug checking technologies aim to identify the contents of illicit drugs. These technologies vary considerably in terms of cost, accuracy, and usability, and while efforts are now underway to implement drug checking programs for people who inject drugs, there remains a lack of rigorous evaluation of their impacts. Given the ongoing overdose crisis and the urgent need for effective responses, research on drug checking should be prioritized. However, while such research should be supported, it should be completed before these technologies are widely implemented.

Future Aeronautical Communication Infrastructure Technology Investigation

NASA Technical Reports Server (NTRS)

Gilbert, Tricia; Jin, Jenny; Bergerm Jason; Henriksen, Steven

2008-01-01

This National Aeronautics and Space Administration (NASA) Contractor Report summarizes and documents the work performed to investigate technologies that could support long-term aeronautical mobile communications operating concepts for air traffic management (ATM) in the timeframe of 2020 and beyond, and includes the associated findings and recommendations made by ITT Corporation and NASA Glenn Research Center to the Federal Aviation Administration (FAA). The work was completed as the final phase of a multiyear NASA contract in support of the Future Communication Study (FCS), a cooperative research and development program of the United States FAA, NASA, and EUROCONTROL. This final report focuses on an assessment of final five candidate technologies, and also provides an overview of the entire technology assessment process, including final recommendations.

Evaluation Criteria for Solid Waste Processing Research and Technology Development

NASA Technical Reports Server (NTRS)

Levri, Julie A.; Hogan, J. A.; Alazraki, M. P.

2001-01-01

A preliminary list of criteria is proposed for evaluation of solid waste processing technologies for research and technology development (R&TD) in the Advanced Life Support (ALS) Program. Completion of the proposed list by current and prospective ALS technology developers, with regard to specific missions of interest, may enable identification of appropriate technologies (or lack thereof) and guide future development efforts for the ALS Program solid waste processing area. An attempt is made to include criteria that capture information about the technology of interest as well as its system-wide impacts. Some of the criteria in the list are mission-independent, while the majority are mission-specific. In order for technology developers to respond to mission-specific criteria, critical information must be available on the quantity, composition and state of the waste stream, the wast processing requirements, as well as top-level mission scenario information (e.g. safety, resource recovery, planetary protection issues, and ESM equivalencies). The technology readiness level (TRL) determines the degree to which a technology developer is able to accurately report on the list of criteria. Thus, a criteria-specific minimum TRL for mandatory reporting has been identified for each criterion in the list. Although this list has been developed to define criteria that are needed to direct funding of solid waste processing technologies, this list processes significant overlap in criteria required for technology selection for inclusion in specific tests or missions. Additionally, this approach to technology evaluation may be adapted to other ALS subsystems.

Stirling Powered Van Progam overview

NASA Technical Reports Server (NTRS)

Shaltens, R. K.

1986-01-01

The Stirling Powered Van Program (SPVP) is a multiyear, multiphase program to evaluate the automotive Stirling engine (ASE) in Air Force vans under realistic conditions. The objective of the SPVP is to transfer to manufacturer and end user(s) (i.e., on the path to commercialization) the second-generation Mod 2 ASE upon completion of the Automotive Stirling Engine Program in 1987. In order to meet this objective, the SPVP must establish Stirling performance, integrity, reliability, durability and maintainability. The ASE program background leading to the van program is reviewed and plans for evaluating the kinematic Stirling engine in Air Force vans examined. Also discussed are the NASA technology transfers to industry that have been accomplished and those which are currently being developed.

BOILING WATER REACTOR TECHNOLOGY STATUS OF THE ART REPORT. VOLUME II. WATER CHEMISTRY AND CORROSION

DOE Office of Scientific and Technical Information (OSTI.GOV)

Breden, C.R.

1963-02-01

Information concerning the corrosive effects of water in power reactor moderator-coolant systems is presented. The information is based on investigations reported in the unclassified literature believed to be fairly complete to 1959, but less complete since then. The material is presented in sections on water decomposition, water chemistry, materials corrosion, corrosion product deposits, and radioactivity. It is noted that the report is presented as a part of a continuing program in development of less expensive materials for use in reactors. (J.R.D.)

KSC All Hands

NASA Image and Video Library

2018-01-11

Mic Woltman, chief of the Fleet Systems Integration Branch of NASA's Launch Services Program, speaks to Kennedy Space Center employees about plans for the coming year. The event took place in the Lunar Theater at the Kennedy Space Center Visitor Complex’s Apollo Saturn V Center. The year will be highlighted with NASA's partners preparing test flights for crewed missions to the International Space Station as part of the agency's Commercial Crew Program and six launches by the Launch Services Program. Exploration Ground Systems will be completing facilities to support the Space Launch System rocket and Orion spacecraft. Exploration Research and Technology Programs will continue to provide supplies to the space station launched as part of the Commercial Resupply Services effort.

Minority University Research and Education Division (MURED) Update

NASA Technical Reports Server (NTRS)

Malone, John

2000-01-01

Program priorities include: (1) Expand and advance NASA's scientific and technological base by building on prior year's efforts in research and academic infrastructure; (2) Increase exposure to NASA's unique mission and facilities by developing closer relationships with NASA Strategic Enterprises; (3) Increase involvement in competitive peer review and merit selection processes; (4) Contribute significantly to the Agency's strategic goals and objectives; (5) Create systemic and sustainable change through partnerships and programs that enhance research and education programs; (6) Prepare faculty and students at HBCU's for NASA-related fields and increase number of students that enter and successfully complete degrees in NASA-related fields; (7) Establish measurable program goals and objectives; and (8) Improve financial management performance.

DIGIMEN, optical mass memory investigations, volume 2

NASA Technical Reports Server (NTRS)

1977-01-01

The DIGIMEM phase of the Optical Mass Memory Investigation Program addressed problems related to the analysis, design, and implementation of a direct digital optical recorder/reproducer. Effort was placed on developing an operational archival mass storage system to support one or more key NASA missions. The primary activity of the DIGIMEM program phase was the design, fabrication, and test and evaluation of a breadboard digital optical recorder/reproducer. Starting with technology and subsystem perfected during the HOLOMEM program phase, a fully operational optical spot recording breadboard that met or exceeded all program goals was evaluated. A thorough evaluation of several high resolution electrophotographic recording films was performed and a preliminary data base management/end user requirements survey was completed.

A Study of Management Concerns in Human Services Organizations: Their Implications for Educational Programs.

ERIC Educational Resources Information Center

Fram, Eugene H.

Opportunities for Rochester Institute of Technology (RIT) to offer new academic offerings for human services managers were assessed. A questionnaire was completed by 174 top-level human services executives located in six upstate New York cities. Additional data were obtained from 12 group interviews that were held with 66 management and line…

Integrating HCI into IDT: Charting the Human Computer Interaction Competencies Necessary for Instructional Media Production Coursework

ERIC Educational Resources Information Center

Brown, Abbie; Sugar, William

2004-01-01

A report on the efforts made to describe the range of human-computer interaction skills necessary to complete a program of study in Instructional Design Technology. Educators responsible for instructional media production courses have not yet articulated which among the wide range of possible interactions students must master for instructional…

Specialized High Schools and Talent Search Programs: Incubators for Adolescents with High Ability in STEM Disciplines

ERIC Educational Resources Information Center

Almarode, John T.; Subotnik, Rena F.; Crowe, Edward; Tai, Robert H.; Lee, Geesoo Maie; Nowlin, Fiona

2014-01-01

The purpose of this study is to investigate the association between self-efficacy and maintenance of interest in science, technology, engineering, and mathematics (STEM) resulting in completion of an undergraduate degree in a science related area. To pursue this analysis, the researchers surveyed 3,510 graduates from selective specialized science…

Masten Space Systems’ Completes Test of Surface Sampling Technology

NASA Image and Video Library

2018-06-13

Honeybee Robotics in Pasadena, California, flight tested its pneumatic sampler collection system, PlanetVac, on Masten Space Systems’ Xodiac rocket on May 24, launching from Mojave, California, and landing to collect a sample of more than 320 grams of top soil from the surface of the desert floor. NASA Flight Opportunities program funded the test flight.

The Effects of Virtual Coaching on Teacher Candidates' Perceptions and Concerns Regarding On-Demand Corrective Feedback

ERIC Educational Resources Information Center

Wake, Donna; Dailey, Debbie; Cotabish, Alicia; Benson, Tammy

2017-01-01

A virtual coaching intervention utilizing Skype and Bluetooth (Bug-in-the-Ear) technology provided immediate corrective feedback to non-traditional teacher candidates during a semester-long internship experience. Participants completed their student teaching internship as a requirement of a teacher preparation program at a mid-size Southeastern…

Hearing Screening Follow-Up: Completing the Process to Identify Hearing Health Needs

ERIC Educational Resources Information Center

Eiserman, William; Shisler, Lenore; Hoffman, Jeff

2015-01-01

Hearing is at the heart of language development and school readiness; increasing numbers of Early Head Start programs have come to rely on otoacoustic emissions (OAE) technology to screen all infants and toddlers for hearing loss. Successful identification of hearing health needs is dependent not only on an appropriate screening method, but also…

The evolution of space mechanisms in the ESA R and D program

NASA Technical Reports Server (NTRS)

Wyn-Roberts, D.

1989-01-01

The status of recently completed and already ongoing technology developments, as well as some of the most important future developments of the European Space Agency are discussed. Among the subjects considered are Scientific Satellites, Columbus space station development, applications spacecraft for communications, Earth observation and meteorology, and the Ariane V and Hermes space transportation systems.

Bench Work and Support Operations, Machine Shop Work--Intermediate: 9555.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course outline has been prepared as a guide to assist the instructor to plan systematically and to present meaningful lessons programmed to meet the necessary training needed by the machine shop student who has completed an introductory course in machine tool technology. The five blocks of instruction contained in this outline are designed to…

Coordination and Evaluation of Videodisc and Microcomputer Programs. Final Technical Report.

ERIC Educational Resources Information Center

McLaughlin, Donald H.; And Others

This report provides information on the background, methodology, and findings of the Videodisc-Microcomputer (ViM) Network project, which brought together over 40 schools in 15 states to explore the potential of a new technology for basic skills instruction. Initiated in 1981 and completed at the end of 1983, the project involved a wide variety of…

Improved Body Mass Index Measures Following a Middle School-Based Obesity Intervention--The MATCH Program

ERIC Educational Resources Information Center

Lazorick, Suzanne; Fang, Xiangming; Hardison, George T.; Crawford, Yancey

2015-01-01

Background: Motivating Adolescents with Technology to CHOOSE Health™ (MATCH) is an educational and behavioral intervention in seventh grade. Methods: Teachers in 2 schools delivered the MATCH curriculum, with 1 control school. Using a quasi-experimental design, outcome measures included lessons completed, body mass index (BMI), BMI z-score (zBMI),…

Doing science, technology and society in the National Science Foundation : commentary on: "Engaged, embedded, enjoined: science and technology studies in the National Science Foundation".

PubMed

Gorman, Michael E

2011-12-01

The author describes his efforts to become a participant observer while he was a Program Director at the NSF. He describes his plans for keeping track of his reflections and his goals before he arrived at NSF, then includes sections from his reflective diary and comments after he had completed his two-year rotation. The influx of rotators means the NSF has to be an adaptive, learning organization but there are bureaucratic obstacles in the way.

Producibility consideration for millimeter-wave transceivers

NASA Astrophysics Data System (ADS)

Seashore, Charles R.

1995-10-01

Considerable progress has been made in the development and demonstration of millimeter wave MMIC technology up to frequencies approaching 100 GHz. The recently completed multiyear, ARPA-sponsored, MIMIC program provided a considerable amount of funding and government-contractor team energy to advance the state-of-art with a number of important GaAs-based transceiver building blocks. Unfortuanely, producibility of millimeter wave MMIC transceiver modules has not been similarly addressed to provide a truly low cost, marketable product. This paper considers the module producibility problem and its various technological implications.

A Compact Prototype of an Optical Pattern Recognition System

NASA Technical Reports Server (NTRS)

Jin, Y.; Liu, H. K.; Marzwell, N. I.

1996-01-01

In the Technology 2006 Case Studies/Success Stories presentation, we will describe and demonstrate a prototype of a compact optical pattern recognition system as an example of a successful technology transfer and continuuing development of state-of-the-art know-how by the close collaboration among government, academia, and small business via the NASA SBIR program. The prototype consists of a complete set of optical pattern recognition hardware with multi-channel storage and retrieval capability that is compactly configured inside a portable 1'X 2'X 3' aluminum case.

Preparing students for graduate study: an eLearning approach.

PubMed

Pintz, Christine; Posey, Laurie

2013-07-01

This paper describes the development and preliminary evaluation of an eLearning program intended to provide incoming nursing students with the basic knowledge, skills and abilities needed to succeed in graduate-level, online coursework. Using Mayer's principles (2008) for the effective design of multimedia instruction, an open-access, self-directed, online program was developed. The Graduate School Boot Camp includes five online modules focused on learning strategies and time management, academic writing, technology, research, and library skills. To motivate and engage learners, the program integrates a fun, graphical sports theme with audiovisual presentations, examples, demonstrations and practice exercises. Learners begin with a self-assessment based on the Motivated Strategies for Learning Questionnaire or MSLQ (Pintrich et al., 1993). To assess change in knowledge levels before and after completing the program, learners take a pre-test and post-test. Preliminary findings indicate that the students found the information relevant and useful. They enjoyed the self-paced, multimedia format, and liked the option to return to specific content later. This innovative program offers a way to prepare students proactively, and may prove useful in identifying students at risk and connecting them with the appropriate resources to facilitate successful program completion. Copyright © 2012 Elsevier Ltd. All rights reserved.

Facility Activation and Characterization for IPD Turbopump Testing at NASA Stennis Space Center

NASA Technical Reports Server (NTRS)

Sass, J. P.; Pace, J. S.; Raines, N. G.; Meredith, T. O.; Taylor, S. A.; Ryan, H. M.

2005-01-01

The Integrated Powerhead Demonstrator (IPD) is a 250K lbf (1.1 MN) thrust cryogenic hydrogen/oxygen engine technology demonstrator that utilizes a full flow staged combustion engine cycle. The Integrated Powerhead Demonstrator (IPD) is, in part, supported by NASA. IPD is also supported through the Department of Defense's Integrated High Payoff Rocket Propulsion Technology (IHPRPT) program, which seeks to increase the performance and capability of today's state-of-the-art rocket propulsion systems while decreasing costs associated with military and commercial access to space. The primary industry participants include Boeing-Rocketdyne and GenCorp Aerojet. The IPD Program recently achieved two major milestones. The first was the successful completion of the IPD Oxidizer Turbopump (OTP) hot-fire test project at the NASA John C. Stennis Space Center (SSC) E-1 test facility in June 2003. A total of nine IPD Workhorse Preburner tests were completed, and subsequently 12 IPD OTP hot-fire tests were completed. The second major milestone was the successful completion of the IPD Fuel Turbopump (FTP) cold-flow test project at the NASA SSC E-1 test facility in November 2003. A total of six IPD FTP cold-flow tests were completed. The next phase of development involves IPD integrated engine system testing also at the NASA SSC E-1 test facility scheduled to begin in early 2005. Following and overview of the NASA SSC E-1 test facility, this paper addresses the facility aspects pertaining to the activation and testing of the IPD oxidizer and fuel turbopumps. In addition, some of the facility challenges encountered and the lessons learned during the test projects shall be detailed.

Evaluation of the Introduction of an e-Health Skills Component for Dietetics Students.

PubMed

Rollo, Megan E; Collins, Clare E; MacDonald-Wicks, Lesley

2017-11-01

Appropriate and effective use of technology within practice is a key competency outlined in Australian dietetics training standards. An e-health skills component (lecture and workshop) was introduced to undergraduate students enrolled in an Australian nutrition and dietetics program. The lecture orientated students to key e-health terms and concepts relating to telehealth and m-health technologies, while the workshop provided an opportunity to apply knowledge. The workshop consisted of four stations with activities relating to (1) orientation to telehealth equipment; (2) comparison of dietetic consultation components completed in person versus remotely via video call; (3) quality assessment of mobile apps; and (4) exploration of advantages and disadvantages, and the ethical, security, and privacy issues relating to use of e-health technologies in dietetic practice. Student experience of the training was evaluated via questionnaire. Forty-five students (62.2% aged ≤19-24 years, 86.7% female) completed the survey. Following the workshop, the level of understanding relating to each key e-health concept improved significantly (p < 0.001). The aspects relating to the impact and need for initial training and ongoing professional education to support the use of e-health technologies within dietetic practice were rated a high level of importance by most students (78-80%). The majority of students (93.3% to 97.8%) reported a positive experience at each of the four workshop stations, with "informative" the most common word selected to rate each station (37.8% to 44.4% of students across the four stations). The introduction of an e-health skills component resulted in an improved understanding of concepts for using these technologies. These findings provide preliminary support for integration of further e-health training within the dietetics program.

The SMART Platform: early experience enabling substitutable applications for electronic health records

PubMed Central

Mandel, Joshua C; Murphy, Shawn N; Bernstam, Elmer Victor; Ramoni, Rachel L; Kreda, David A; McCoy, J Michael; Adida, Ben; Kohane, Isaac S

2012-01-01

Objective The Substitutable Medical Applications, Reusable Technologies (SMART) Platforms project seeks to develop a health information technology platform with substitutable applications (apps) constructed around core services. The authors believe this is a promising approach to driving down healthcare costs, supporting standards evolution, accommodating differences in care workflow, fostering competition in the market, and accelerating innovation. Materials and methods The Office of the National Coordinator for Health Information Technology, through the Strategic Health IT Advanced Research Projects (SHARP) Program, funds the project. The SMART team has focused on enabling the property of substitutability through an app programming interface leveraging web standards, presenting predictable data payloads, and abstracting away many details of enterprise health information technology systems. Containers—health information technology systems, such as electronic health records (EHR), personally controlled health records, and health information exchanges that use the SMART app programming interface or a portion of it—marshal data sources and present data simply, reliably, and consistently to apps. Results The SMART team has completed the first phase of the project (a) defining an app programming interface, (b) developing containers, and (c) producing a set of charter apps that showcase the system capabilities. A focal point of this phase was the SMART Apps Challenge, publicized by the White House, using http://www.challenge.gov website, and generating 15 app submissions with diverse functionality. Conclusion Key strategic decisions must be made about the most effective market for further disseminating SMART: existing market-leading EHR vendors, new entrants into the EHR market, or other stakeholders such as health information exchanges. PMID:22427539

A Synthetic Vision Preliminary Integrated Safety Analysis

NASA Technical Reports Server (NTRS)

Hemm, Robert; Houser, Scott

2001-01-01

This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartke, T.C.

Under the US Department of Energy's Underground-Coal-Conversion program, four field tests were completed in 1979 and preparations were begun in 1980 for two additional field tests to be operated in 1981. The Laramie Energy Technology Center (LETC) and Sandia National Laboratories (SNL) completed Hanna IV, an air gasification test in Wyoming subbituminous coal. The Morgantown Energy Technology Center (METC) completed Pricetown 1, an air gasification test in West Virginia bituminous coal. Lawrence Livermore National Laboratory (LLNL) completed Hoe Creek 3, a steam-oxygen gasification test in Wyoming subbituminous coal. Gulf Research and Development Co. completed Steeply Dipping Beds (SDB) Test 1,more » primarily an air gasification test in Wyoming subbituminous coal and the first SDB test in the US. In 1980, Gulf R and D Co. began preparation of SDB Test 2, scheduled for operation in the fall of 1981. The DOE project teams at LETC, METC, LLNL, and SNL, in association with the Washington Irrigation and Development Co. (WIDCo), Washington Water Power (WWP), and the State of Washington, are preparing a field test site in the Centralia-Chehalis coal district of Washington. A series of large coal block tests will be completed prior to the field test, scheduled for operation in 1982 or 1983. This field test will utilize a directionally drilled link and steam-oxygen gasification system. This paper summarizes the results of the four recently completed field tests and the plans for additional tests.« less

Health technology reassessment of non-drug technologies: current practices.

PubMed

Leggett, Laura; Noseworthy, Tom W; Zarrabi, Mahmood; Lorenzetti, Diane; Sutherland, Lloyd R; Clement, Fiona M

2012-07-01

Obsolescence is a natural phase of the lifecycle of health technologies. Given increasing cost of health expenditures worldwide, health organizations have little choice but to engage in health technology reassessment (HTR); a structured, evidence-based assessment of the medical, social, ethical, and economic effects of a technology, currently used within the healthcare system, to inform optimal use of that technology in comparison to its alternatives. This research was completed to identify and summarize international HTR initiatives for non-drug technologies. A systematic review was performed using the terms disinvestment, obsolescence, obsolete technology, ineffective, reassessment, reinvestment, reallocation, program budgeting, and marginal analysis to search PubMED, MEDLINE, EMBASE, and CINAHL until November 2011. Websites of organizations listed as members of INAHTA and HTAi were hand-searched for gray literature. Documents were excluded if they were unavailable in English, if the title/abstract was irrelevant to HTR, and/or if the document made no mention of current practices. All citations were screened in duplicate with disagreements resolved by consensus. Sixty full-text documents were reviewed and forty were included. One model for reassessment was identified; however, it has never been put into practice. Eight countries have some evidence of past or current work related to reassessment; seven have shown evidence of continued work in HTR. There is negligible focus on monitoring and implementation. HTR is in its infancy. Although health technology reassessments are being conducted, there is no standardized approach. Future work should focus on developing and piloting a comprehensive methodology for completing HTR.

Jobs and Renewable Energy Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sterzinger, George

2006-12-19

Early in 2002, REPP developed the Jobs Calculator, a tool that calculates the number of direct jobs resulting from renewable energy development under RPS (Renewable Portfolio Standard) legislation or other programs to accelerate renewable energy development. The calculator is based on a survey of current industry practices to assess the number and type of jobs that will result from the enactment of a RPS. This project built upon and significantly enhanced the initial Jobs Calculator model by (1) expanding the survey to include other renewable technologies (the original model was limited to wind, solar PV and biomass co-firing technologies); (2)more » more precisely calculating the economic development benefits related to renewable energy development; (3) completing and regularly updating the survey of the commercially active renewable energy firms to determine kinds and number of jobs directly created; and (4) developing and implementing a technology to locate where the economic activity related to each type of renewable technology is likely to occur. REPP worked directly with groups in the State of Nevada to interpret the results and develop policies to capture as much of the economic benefits as possible for the state through technology selection, training program options, and outreach to manufacturing groups.« less

The impact of using mobile-enabled devices on patient engagement in remote monitoring programs.

PubMed

Agboola, Stephen; Havasy, Rob; Myint-U, Khinlei; Kvedar, Joseph; Jethwani, Kamal

2013-05-01

Different types of data transmission technologies are used in remote monitoring (RM) programs. This study reports on a retrospective analysis of how participants engage, based on the type of data transfer technology used in a blood pressure (BP) RM program, and its potential impact on RM program design and outcomes. Thirty patients, aged 23-84 years (62 ± 14 years), who had completed at least 2 months in the program and were not participating in any other clinical trial were identified from the Remote Monitoring Data Repository. Half of these patients used wireless-based data transfer devices [wireless-based device (WBD)] while the other half used telephone modem-based data transfer devices [modem-based device (MBD)]. Participants were matched by practice and age. Engagement indices, which include frequency of BP measurements, frequency of data uploads, time to first BP measurement, and time to first data upload, were compared in both groups using the Wilcoxon-Mann-Whitney two-sample rank-sum test. Help desk call data were analyzed by Chi square test. The frequency of BP measurements and data uploads was significantly higher in the WBD group versus the MBD group [median = 0.66 versus 0.2 measurements/day (p = .01) and 0.46 versus 0.01 uploads/day (p < .001), respectively]. Time to first upload was significantly lower in the WBD group (median = 4 versus 7 days; p = .02), but time to first BP measurement did not differ between the two groups (median = 2 versus 1 day; p = .98). Wireless transmission ensures instantaneous transmission of readings, providing clinicians timely data to intervene on. Our findings suggest that mobile-enabled wireless technologies can positively impact patient engagement, outcomes, and operational workflow in RM programs. © 2013 Diabetes Technology Society.

Examining the potential of information technology to improve public insurance application processes: enrollee assessments from a concurrent mixed method analysis.

PubMed

Mishra, Abhay Nath; Ketsche, Patricia; Marton, James; Snyder, Angela; McLaren, Susan

2014-01-01

To assess the perceived readiness of Medicaid and Children's Health Insurance Program (CHIP) enrollees to use information technologies (IT) in order to facilitate improvements in the application processes for these public insurance programs. We conducted a concurrent mixed method study of Medicaid and CHIP enrollees in a southern state. We conducted focus groups to identify enrollee concerns regarding the current application process and their IT proficiency. Additionally, we surveyed beneficiaries via telephone about their access to and use of the Internet, and willingness to adopt IT-enabled processes. 2013 households completed the survey. We used χ(2) analysis for comparisons across different groups of respondents. A majority of enrollees will embrace IT-enabled enrollment, but a small yet significant group continues to lack access to facilitating technologies. Moreover, a segment of beneficiaries in the two programs continues to place a high value on personal interactions with program caseworkers. IT holds the promise of improving efficiency and reducing barriers for enrollees, but state and federal agencies managing public insurance programs need to ensure access to traditional processes and make caseworkers available to those who require and value such assistance, even after implementing IT-enabled processes. The use of IT-enabled processes is essential for effectively managing eligibility and enrollment determinations for public programs and private plans offered through state or federally operated exchanges. However, state and federal officials should be cognizant of the technological readiness of recipients and provide offline help to ensure broad participation in the insurance market. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Joint University Program for Air Transportation Research, 1983

NASA Technical Reports Server (NTRS)

Morrell, Frederick R. (Compiler)

1987-01-01

The research conducted during 1983 under the NASA/FAA sponsored Joint University Program for Air Transportation Research is summarized. The material was presented at a conference held at the Federal Aviation Administration Technical Center, Altantic City, New Jersey, December 16, 1983. The Joint University Program is a coordinated set of three grants sponsored by NASA Langley Research Center and the Federal Aviation Administration, one each with the Massachusetts Institute of Technology, Ohio University, and Princeton University. Completed works, status reports, and bibliographies are presented for research topics, which include navigation, guidance, control, and display concepts. An overview of the year's activities for each of the universities is also presented.

KSC All Hands

NASA Image and Video Library

2018-01-11

Russ DeLoach, director of Safety and Mission Assurance, speaks to Kennedy Space Center employees about plans for the coming year. The event took place in the Lunar Theater at the Kennedy Space Center Visitor Complex’s Apollo Saturn V Center. The year will be highlighted with NASA's partners preparing test flights for crewed missions to the International Space Station as part of the agency's Commercial Crew Program and six launches by the Launch Services Program. Exploration Ground Systems will be completing facilities to support the Space Launch System rocket and Orion spacecraft. Exploration Research and Technology Programs will continue to provide supplies to the space station launched as part of the Commercial Resupply Services effort.

KSC All Hands

NASA Image and Video Library

2018-01-11

Kennedy Space Center Director Bob Cabana speaks to employees at the Florida spaceport about plans for the coming year. The event took place in the Lunar Theater at the Kennedy Space Center Visitor Complex’s Apollo Saturn V Center. The year will be highlighted with NASA's partners preparing test flights for crewed missions to the International Space Station as part of the agency's Commercial Crew Program and six launches by the Launch Services Program. Exploration Ground Systems will be completing facilities to support the Space Launch System rocket and Orion spacecraft. Exploration Research and Technology Programs will continue to provide supplies to the space station launched as part of the Commercial Resupply Services effort.

A Strategy for Thailand's Space Technology Development: National Space Program (NSP)

NASA Astrophysics Data System (ADS)

Pimnoo, Ammarin; Purivigraipong, Somphop

2016-07-01

The Royal Thai Government has established the National Space Policy Committee (NSPC) with mandates for setting policy and strategy. The NSPC is considering plans and budget allocation for Thai space development. NSPC's goal is to promote the utilization of space technology in a manner that is congruent with the current situation and useful for the economy, society, science, technology, educational development and national security. The first proposed initiative of the National Space Program (NSP) is co-development of THEOS-2, a next-generation satellite system that includes Thailand's second and third earth observation satellite (THAICHOTE-2 and THAICHOTE-3). THEOS-1 or THAICHOTE-1 was the first Earth Observation Satellite of Thailand launched in 2008. At present, the THAICHOTE-1 is over the lifetime, therefore the THEOS-2 project has been established. THEOS-2 is a complete Earth Observation System comprising THAICHOTE-2&3 as well as ground control segment and capacity building. Thus, NSPC has considered that Thailand should manage the space system. Geo-Informatics and Space Technology Development Agency (GISTDA) has been assigned to propose the initiative National Space Program (NSP). This paper describes the strategy of Thailand's National Space Program (NSP) which will be driven by GISTDA. First, NSP focuses on different aspects of the utilization of space on the basis of technology, innovation, knowledge and manpower. It contains driving mechanisms related to policy, implementation and use in order to promote further development. The Program aims to increase economic competitiveness, reduce social disparity, and improve social security, natural resource management and environmental sustainability. The NSP conceptual framework includes five aspects: communications satellites, earth observation satellite systems, space economy, space exploration and research, and NSP administration. THEOS-2 is considered a part of NSP with relevance to the earth observation satellite systems and space economy components. We also discuss the cooperative framework among space organizations or countries who are APRSAF members, with relevance to space exploration and research. The aspect of communications satellites may involve collaboration between Ministry of Science and Technology (MOST) and Ministry of Information and Communication Technology (ICT). In short, NSP is the first coherent and comprehensive effort covering all aspects of Thailand's space technology.

CECE: Expanding the Envelope of Deep Throttling Technology in Liquid Oxygen/Liquid Hydrogen Rocket Engines for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Giuliano, Victor J.; Leonard, Timothy G.; Lyda, Randy T.; Kim, Tony S.

2010-01-01

As one of the first technology development programs awarded by NASA under the Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA s Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RL10, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in high-energy, cryogenic, in-space propulsion. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Four series of demonstrator engine tests have been successfully completed between April 2006 and April 2010, accumulating 7,436 seconds of hot fire time over 47 separate tests. While the first two test series explored low power combustion (chug) and system instabilities, the third test series investigated and was ultimately successful in demonstrating several mitigating technologies for these instabilities and achieved a stable throttling ratio of 13:1. The fourth test series significantly expanded the engine s operability envelope by successfully demonstrating a closed-loop control system and extensive transient modeling to enable lower power engine starting, faster throttle ramp rates, and mission-specific ignition testing. The final hot fire test demonstrated a chug-free, minimum power level of 5.9%, corresponding to an overall 17.6:1 throttling ratio achieved. In total, these tests have provided an early technology demonstration of an enabling cryogenic propulsion concept with invaluable system-level technology data acquisition toward design and development risk mitigation for future lander descent main engines.

Knowledge sifters in MDA technologies

NASA Astrophysics Data System (ADS)

Kravchenko, Yuri; Kursitys, Ilona; Bova, Victoria

2018-05-01

The article considers a new approach to efficient management of information processes on the basis of object models. With the help of special design tools, a generic and application-independent application model is created, and then the program is implemented in a specific development environment. At the same time, the development process is completely based on a model that must contain all the information necessary for programming. The presence of a detailed model provides the automatic creation of typical parts of the application, the development of which is amenable to automation.

Building America Systems Integration Research Annual Report: FY 2012

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gestwick, M.

2013-05-01

This document is the Building America FY2012 Annual Report, which includes an overview of the Building America Program activities and the work completed by the National Renewable Energy Laboratory and the Building America industry consortia (the Building America teams). The annual report summarizes major technical accomplishments and progress towards U.S. Department of Energy Building Technologies Program's multi-year goal of developing the systems innovations that enable risk-free, cost effective, reliable and durable efficiency solutions that reduce energy use by 30%-50% in both new and existing homes.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Technical Reports Server (NTRS)

Miller, L.

1986-01-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

The 4.5 inch diameter IPV Ni-H2 cell development program

NASA Astrophysics Data System (ADS)

Miller, L.

1986-09-01

Interest in larger capacity Ni-H2 battery cells for space applications has resulted in the initiation of a development/qualification/production program. Cell component design was completed and component hardware fabricated and/or delivered. Finished cell design projections demonstrate favorable specific energies in the range of 70 to 75 Whr/Kg (32 to 34 Whr/Lb) for capacities of 100 to 250 Ah. It is further planned during this effort to evaluate the advanced cell design technology which has evolved from the work conducted at the NASA/Lewis Research Center.

Multi-KW dc distribution system technology research study

NASA Technical Reports Server (NTRS)

Dawson, S. G.

1978-01-01

The Multi-KW DC Distribution System Technology Research Study is the third phase of the NASA/MSFC study program. The purpose of this contract was to complete the design of the integrated technology test facility, provide test planning, support test operations and evaluate test results. The subjet of this study is a continuation of this contract. The purpose of this continuation is to study and analyze high voltage system safety, to determine optimum voltage levels versus power, to identify power distribution system components which require development for higher voltage systems and finally to determine what modifications must be made to the Power Distribution System Simulator (PDSS) to demonstrate 300 Vdc distribution capability.

International Space Station (ISS)

NASA Image and Video Library

1998-01-01

This artist's concept depicts the completely assembled International Space Station (ISS) passing over the Straits of Gibraltar and the Mediterranean Sea. As a gateway to permanent human presence in space, the Space Station Program is to expand knowledge benefiting all people and nations. The ISS is a multidisciplinary laboratory, technology test bed, and observatory that will provide unprecedented undertakings in scientific, technological, and international experimentation. Experiments to be conducted in the ISS include: microgravity research, Earth science, space science, life sciences, space product development, and engineering research and technology. The sixteen countries participating the ISS are: United States, Russian Federation, Canada, Japan, United Kingdom, Germany, Italy, France, Norway, Netherlands, Belgium, Spain, Denmark, Sweden, Switzerland, and Brazil.

Hyper-X Engine Design and Ground Test Program

NASA Technical Reports Server (NTRS)

Voland, R. T.; Rock, K. E.; Huebner, L. D.; Witte, D. W.; Fischer, K. E.; McClinton, C. R.

1998-01-01

The Hyper-X Program, NASA's focused hypersonic technology program jointly run by NASA Langley and Dryden, is designed to move hypersonic, air-breathing vehicle technology from the laboratory environment to the flight environment, the last stage preceding prototype development. The Hyper-X research vehicle will provide the first ever opportunity to obtain data on an airframe integrated supersonic combustion ramjet propulsion system in flight, providing the first flight validation of wind tunnel, numerical and analytical methods used for design of these vehicles. A substantial portion of the integrated vehicle/engine flowpath development, engine systems verification and validation and flight test risk reduction efforts are experimentally based, including vehicle aeropropulsive force and moment database generation for flight control law development, and integrated vehicle/engine performance validation. The Mach 7 engine flowpath development tests have been completed, and effort is now shifting to engine controls, systems and performance verification and validation tests, as well as, additional flight test risk reduction tests. The engine wind tunnel tests required for these efforts range from tests of partial width engines in both small and large scramjet test facilities, to tests of the full flight engine on a vehicle simulator and tests of a complete flight vehicle in the Langley 8-Ft. High Temperature Tunnel. These tests will begin in the summer of 1998 and continue through 1999. The first flight test is planned for early 2000.

Understanding adolescent response to a technology-based depression prevention program.

PubMed

Gladstone, Tracy; Marko-Holguin, Monika; Henry, Jordan; Fogel, Joshua; Diehl, Anne; Van Voorhees, Benjamin W

2014-01-01

Guided by the Behavioral Vaccine Theory of prevention, this study uses a no-control group design to examine intervention variables that predict favorable changes in depressive symptoms at 6- to 8-week follow-up in at-risk adolescents who participated in a primary care, Internet-based prevention program. Participants included 83 adolescents from primary care settings ages 14 to 21 (M = 17.5, SD = 2.04), 56.2% female, with 41% non-White. Participants completed self-report measures, met with a physician, and then completed a 14-module Internet intervention targeting the prevention of depression. Linear regression models indicated that several intervention factors (duration on website in days, the strength of the relationship with the physician, perceptions of ease of use, and the perceived relevance of the material presented) were significantly associated with greater reductions in depressive symptoms from baseline to follow-up. Automatic negative thoughts significantly mediated the relation between change in depressive symptoms scores and both duration of use and physician relationship. Several intervention variables predicted favorable changes in depressive symptom scores among adolescents who participated in an Internet-based prevention program, and the strength of two of these variables was mediated by automatic negative thoughts. These findings support the importance of cognitive factors in preventing adolescent depression and suggest that modifiable aspects of technology-based intervention experience and relationships should be considered in optimizing intervention design.

Fuel cell technology program

NASA Technical Reports Server (NTRS)

1973-01-01

A fuel cell technology program was established to advance the state-of-the-art of hydrogen-oxygen fuel cells using low temperature, potassium hydroxide electrolyte technology as the base. Program tasks are described consisting of baseline cell design and stack testing, hydrogen pump design and testing, and DM-2 powerplant testing and technology extension efforts. A baseline cell configuration capable of a minimum of 2000 hours of life was defined. A 6-cell prototype stack, incorporating most of the scheme cell features, was tested for a total of 10,497 hours. A 6-cell stack incorporating all of the design features was tested. The DM-2 powerplant with a 34 cell stack, an accessory section packaged in the basic configuration anticipated for the space shuttle powerplant and a powerplant control unit, was defined, assembled, and tested. Cells were used in the stack and a drag-type hydrogen pump was installed in the accessory section. A test program was established, in conjunction with NASA/JSC, based on space shuttle orbiter mission. A 2000-hour minimum endurance test and a 5000-hour goal were set and the test started on August 8, 1972. The 2000-hour milestone was completed on November 3, 1972. On 13 March 1973, at the end of the thirty-first simulated seven-day mission and 5072 load hours, the test was concluded, all goals having been met. At this time, the DM-2 was in excellent condition and capable of additional endurance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, D.F.

This analysis evaluates the incentives necessary to introduce commercial scale Advanced Clean Coal Technologies, specifically Integrated Coal Gasification Combined Cycle (ICGCC) and Pressurized Fluidized Bed Combustion (PFBC) powerplants. The incentives required to support the initial introduction of these systems are based on competitive busbar electricity costs with natural gas fired combined cycle powerplants, in baseload service. A federal government price guarantee program for up to 10 Advanced Clean Coal Technology powerplants, 5 each ICGCC and PFBC systems is recommended in order to establish the commercial viability of these systems by 2010. By utilizing a decreasing incentives approach as the technologiesmore » mature (plants 1--5 of each type), and considering the additional federal government benefits of these plants versus natural gas fired combined cycle powerplants, federal government net financial exposure is minimized. Annual net incentive outlays of approximately 150 million annually over a 20 year period could be necessary. Based on increased demand for Advanced Clean Coal Technologies beyond 2010, the federal government would be revenue neutral within 10 years of the incentives program completion.« less

Aerocapture Systems Analysis for a Titan Mission

NASA Technical Reports Server (NTRS)

Lockwood, Mary K.; Queen, Eric M.; Way, David W.; Powell, Richard W.; Edquist, Karl; Starr, Brett W.; Hollis, Brian R.; Zoby, E. Vincent; Hrinda, Glenn A.; Bailey, Robert W.

2006-01-01

Performance projections for aerocapture show a vehicle mass savings of between 40 and 80%, dependent on destination, for an aerocapture vehicle compared to an all-propulsive chemical vehicle. In addition aerocapture is applicable to multiple planetary exploration destinations of interest to NASA. The 2001 NASA In-Space Propulsion Program (ISP) technology prioritization effort identified aerocapture as one of the top three propulsion technologies for solar system exploration missions. An additional finding was that aerocapture needed a better system definition and that supporting technology gaps needed to be identified. Consequently, the ISP program sponsored an aerocapture systems analysis effort that was completed in 2002. The focus of the effort was on aerocapture at Titan with a rigid aeroshell system. Titan was selected as the initial destination for the study due to potential interest in a follow-on mission to Cassini/Huygens. Aerocapture is feasible, and the performance is adequate, for the Titan mission and it can deliver 2.4 times more mass to Titan than an all-propulsive system for the same launch vehicle.

Promoting Ocean Literacy through American Meteorological Society Programs

NASA Astrophysics Data System (ADS)

Passow, Michael; Abshire, Wendy; Weinbeck, Robert; Geer, Ira; Mills, Elizabeth

2017-04-01

American Meteorological Society Education Programs provide course materials, online and physical resources, educator instruction, and specialized training in ocean, weather, and climate sciences (https://www.ametsoc.org/ams/index.cfm/education-careers/education-program/k-12-teachers/). Ocean Science literacy efforts are supported through the Maury Project, DataStreme Ocean, and AMS Ocean Studies. The Maury Project is a summer professional development program held at the US Naval Academy designed to enhance effective teaching of the science, technology, engineering, and mathematics of oceanography. DataStreme Ocean is a semester-long course offered twice a year to participants nationwide. Created and sustained with major support from NOAA, DS Ocean explores key concepts in marine geology, physical and chemical oceanography, marine biology, and climate change. It utilizes electronically-transmitted text readings, investigations and current environmental data. AMS Ocean Studies provides complete packages for undergraduate courses. These include online textbooks, investigations manuals, RealTime Ocean Portal (course website), and course management system-compatible files. It can be offered in traditional lecture/laboratory, completely online, and hybrid learning environments. Assistance from AMS staff and other course users is available.

Practical Example of Introductory Engineering Education Based on the Design Process and Teaching Methodology Using a Gyro Bicycle

ERIC Educational Resources Information Center

Higa, Yoshikazu; Shimojima, Ken

2018-01-01

This report describes a workshop on the Dynamics of Machinery based on the fabrication of a gyro- bicycle in a summer school program for junior high school students. The workshop was conducted by engineering students who had completed "Creative Research", an engineering design course at the National Institute of Technology, Okinawa…

Predicting the Use of Paired Programming: Applying the Attitudes of Application Development Managers through the Technology Acceptance Model

ERIC Educational Resources Information Center

Zecca, Mark S.

2010-01-01

Business managers who look for ways to cut costs face difficult questions about the efficiency and effectiveness of software engineering practices that are used to complete projects on time, on specification, and within budget (Johnson, 1995; Lindstrom & Jeffries, 2004). Theoretical models such as the Theory of Reasoned Action (TRA) have linked…

An Analysis of Young Students' Thinking When Completing Basic Coding Tasks Using Scratch Jnr. on the iPad

ERIC Educational Resources Information Center

Falloon, G.

2016-01-01

Recent government moves in many countries have seen coding included in school curricula, or promoted as part of computing, mathematics or science programmes. While these moves have generally been associated with a need to engage more young people in technology study, research has hinted at possible benefits from learning to program including…

The Relationship between Gender, Ethnicity, and Technology on the Impact of Mathematics Achievement in an After-School Program

ERIC Educational Resources Information Center

Huang, Xudong; Craig, Scotty D.; Xie, Jun; Graesser, Arthur C.; Okwumabua, Theresa; Cheney, Kyle R.; Hu, Xiangen

2013-01-01

The gap among ethnicities and gender in mathematics achievement is a well-known problem. While the gap has been shrinking over the past three decades, it has not completely diminished (Jencks & Phillips, 1998; McGraw, Lubienski, & Strutchens, 2006). The ALEKS, Assessment and LEarning in Knowledge Spaces, tutoring system is one promising…

Total-System Design: Planning, Delivering, and Sharing Instruction Oriented to Professional Practice and Human Values.

ERIC Educational Resources Information Center

Lux, M. Janet

Aspects of the Total-System Design (TSD) approach to instructional design in medical laboratory science that was implemented at Creighton University are described. In a four-year project, TSD principles were used to produce the uniform, systematic, and complete definition of a medical technology major within a program of study leading to the…

Assisting People with Developmental Disabilities to Improve Computer Pointing Efficiency through Multiple Mice and Automatic Pointing Assistive Programs

ERIC Educational Resources Information Center

Shih, Ching-Hsiang

2011-01-01

This study combines multi-mice technology (people with disabilities can use standard mice, instead of specialized alternative computer input devices, to achieve complete mouse operation) with an assistive pointing function (i.e. cursor-capturing, which enables the user to move the cursor to the target center automatically), to assess whether two…

Advanced control technology and airworthiness flying qualities requirements

NASA Technical Reports Server (NTRS)

Snyder, C. T.

1976-01-01

Flying quality requirements are specified in terms of the complete pilot-airframe-systems loop, the task, and the environment. Results from a study of flying qualities are reported. A review of the treatment of failure cases in various flying quality requirements is presented along with a description of the methods used and relevant lessons learned from recent Autoland certification programs.

Audit Report "The Department of Energy's Loan Guarantee Program for Innovative Energy Technologies"

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2009-02-01

The Energy Policy Act of 2005 authorized the Department of Energy to guarantee loans for new or significantly improved energy production technologies that avoid, reduce, or sequester air pollutants and other greenhouse gases. As of December 2008, Congress authorized the Department to make $42.5 billion in loan guarantees to support innovative energy projects. These guarantees were authorized for up to 80% of the total project costs and were designed to promote the commercial use of innovative technologies. Under the terms of the Act, the loan guarantees are contingent upon reasonable prospect of repayment by the borrower. Consistent with the Energymore » Policy Act, the Department is responsible for soliciting and evaluating loan applications, approving loan guarantees, and monitoring project and loan guarantee performance. through December 2008, the Department had issued five solicitations for projects that support innovative clean coal technologies, energy efficiency, renewable energy, advanced electricity transmission and distribution, and nuclear and fossil energy projects. These solicitations were issued in three phases with the first in August 2006, and the final in September 2008. Eleven substantially complete applications requesting approximately $8.2 billion in loan guarantees had been received by the Department in response to the first solicitation. The Department had begun the review of applications and was in the process of completing due diligence procedures necessary to evaluate projects received in response to the first solicitation. Under current plans, the Department is to issue its first loan guarantees in the spring of 2009. Because of the importance of this program as part of an effort to address the Nation's most challenging and pressing energy needs; and, the potential risk of loss to the United States taxpayers should default occur, we initiated this review to evaluate the Department's progress in establishing internal and operational controls over its Loan Guarantee Program.« less

Advanced Industrial Materials (AIM) program. Annual progress report. FY 1996

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-04-01

The Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% ofmore » industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 or 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.` Though AIM remains essentially a National Laboratory Program, it is necessary that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains healthy and productive, thanks to the superb investigators and Laboratory Program Managers. Separate abstracts have been indexed into the energy database for articles from this report.« less

The NASA LeRC regenerative fuel cell system testbed program for goverment and commercial applications

NASA Astrophysics Data System (ADS)

Maloney, Thomas M.; Prokopius, Paul R.; Voecks, Gerald E.

1995-01-01

The Electrochemical Technology Branch of the NASA Lewis Research Center (LeRC) has initiated a program to develop a renewable energy system testbed to evaluate, characterize, and demonstrate fully integrated regenerative fuel cell (RFC) system for space, military, and commercial applications. A multi-agency management team, led by NASA LeRC, is implementing the program through a unique international coalition which encompasses both government and industry participants. This open-ended teaming strategy optimizes the development for space, military, and commercial RFC system technologies. Program activities to date include system design and analysis, and reactant storage sub-system design, with a major emphasis centered upon testbed fabrication and installation and testing of two key RFC system components, namely, the fuel cells and electrolyzers. Construction of the LeRC 25 kW RFC system testbed at the NASA-Jet Propulsion Labortory (JPL) facility at Edwards Air Force Base (EAFB) is nearly complete and some sub-system components have already been installed. Furthermore, planning for the first commercial RFC system demonstration is underway.

USACE National Coastal Mapping Program Update

NASA Astrophysics Data System (ADS)

Sylvester, C.

2017-12-01

The Joint Airborne Lidar Bathymetry Technical Center of Expertise (JALBTCX) formed in 1998 to support the coastal mapping and charting requirements of the USACE, NAVO, NOAA and USGS. This partnership fielded three generations of airborne lidar bathymeters, executed operational data collection programs within the U.S. and overseas, and advanced research and development in airborne lidar bathymetry and complementary technologies. JALBTCX executes a USACE Headquarters-funded National Coastal Mapping Program (NCMP). Initiated in 2004, the NCMP provides high-resolution, high-accuracy elevation and imagery data along the sandy shorelines of the U.S. on a recurring basis. NCMP mapping activities are coordinated with Federal mapping partners through the Interagency Working Group on Ocean and Coastal Mapping and the 3D Elevation Program. The NCMP, currently in it's third cycle, is performing operations along the East Coast in 2017, after having completed surveys along the Gulf Coast in 2016 and conducting emergency response operations in support of Hurricane Matthew. This presentation will provide an overview of JALBTCX, its history in furthering airborne lidar bathymetry technology to meet emerging mapping requirements, current NCMP operations and data products, and Federal mapping coordination activities.

LSST (Hoop/Column) Maypole Antenna Development Program, phase 1, part 1

NASA Technical Reports Server (NTRS)

Sullivan, M. R.

1982-01-01

The first of a two-phase program was performed to develop the technology necessary to evaluate, design, manufacture, package, transport and deploy the hoop/column deployable antenna reflector by means of a ground based program. The hoop/column concept consists of a cable stiffened large diameter hoop and central column structure that supports and contours a radio frequency reflective mesh surface. Mission scenarios for communications, radiometer and radio astronomy, were studied. The data to establish technology drivers that resulted in a specification of a point design was provided. The point design is a multiple beam quadaperture offset antenna system wich provides four separate offset areas of illumination on a 100 meter diameter symmetrical parent reflector. The periphery of the reflector is a hoop having 48 segments that articulate into a small stowed volume around a center extendable column. The hoop and column are structurally connected by graphite and quartz cables. The prominence of cables in the design resulted in the development of advanced cable technology. Design verification models were built of the hoop, column, and surface stowage subassemblies. Model designs were generated for a half scale sector of the surface and a 1/6 scale of the complete deployable reflector.

Using CAD/CAM technology to create a 10-unit zirconia fixed partial denture--a UTHSCSA dental school case report.

PubMed

Zimmermann, Richard; Seitz, Stefanie; Magness, Brent; Wieck, Blaine

2013-10-01

From diagnosis and treatment planning to the materials being used, technology is changing dentistry. New materials are providing dentists greater options for treatment, while technology is streamlining the workflow in the office and dental laboratory. Traditionally the creation of a long-span fixed partial denture was a labor intense project--from waxing up the prosthesis--to stacking of the porecelain. For larger frameworks, it was recommended for the dentist to bring in the patient in for a framework try-in. However, advances in both CAD/CAM technology and dental materials are revolutionizing the way dentistry is being done. The following describes the fabrication of a 10-unit full contour zirconia fixed partial denture completed in the pre-doctorate program at UTHSCSA Dental School.

Orbit Transfer Rocket Engine Technology Program: Advanced engine study, task D.1/D.3

NASA Technical Reports Server (NTRS)

Martinez, A.; Erickson, C.; Hines, B.

1986-01-01

Concepts for space maintainability of OTV engines were examined. An engine design was developed which was driven by space maintenance requirements and by a failure mode and effects (FME) analysis. Modularity within the engine was shown to offer cost benefits and improved space maintenance capabilities. Space operable disconnects were conceptualized for both engine change-out and for module replacement. Through FME mitigation the modules were conceptualized to contain the least reliable and most often replaced engine components. A preliminary space maintenance plan was developed around a controls and condition monitoring system using advanced sensors, controls, and condition monitoring concepts. A complete engine layout was prepared satisfying current vehicle requirements and utilizing projected component advanced technologies. A technology plan for developing the required technology was assembled.

Making a Difference in Science Education: The Impact of Undergraduate Research Programs

PubMed Central

Eagan, M. Kevin; Hurtado, Sylvia; Chang, Mitchell J.; Garcia, Gina A.; Herrera, Felisha A.; Garibay, Juan C.

2014-01-01

To increase the numbers of underrepresented racial minority students in science, technology, engineering, and mathematics (STEM), federal and private agencies have allocated significant funding to undergraduate research programs, which have been shown to students’ intentions of enrolling in graduate or professional school. Analyzing a longitudinal sample of 4,152 aspiring STEM majors who completed the 2004 Freshman Survey and 2008 College Senior Survey, this study utilizes multinomial hierarchical generalized linear modeling (HGLM) and propensity score matching techniques to examine how participation in undergraduate research affects STEM students’ intentions to enroll in STEM and non-STEM graduate and professional programs. Findings indicate that participation in an undergraduate research program significantly improved students’ probability of indicating plans to enroll in a STEM graduate program. PMID:25190821

A hybrid classroom-online curriculum format for RN-BSN students: cohort support and curriculum structure improve graduation rates.

PubMed

Davidson, Susan C; Metzger, Richard; Lindgren, Katherine S

2011-05-01

As more registered nurses (RNs) return to school to obtain a bachelor of science in nursing (BSN), innovative ways must be found to support them in this endeavor. Barriers for RNs who return to school include scheduling of coursework and fear of failure. One school of nursing with a traditional BSN program reviewed its RN-BSN track, with its low retention and graduation rates. With input from nursing leaders and nurses in the community, the school applied for and was awarded a 3-year Health Resources and Services Administration grant to redesign the RN-BSN program. A hybrid classroom-online curriculum is offered in a structured, sequential format so that the RNs are admitted once a year and must complete the courses as a group, in a cohort. Data collected from evaluations showed that program support, technology support, and social support from peers encouraged the RNs to "stay the course," and 100% completed the requirements to graduate. Copyright 2011, SLACK Incorporated.

Results of Small-scale Solid Rocket Combustion Simulator testing at Marshall Space Flight Center

NASA Technical Reports Server (NTRS)

Goldberg, Benjamin E.; Cook, Jerry

1993-01-01

The Small-scale Solid Rocket Combustion Simulator (SSRCS) program was established at the Marshall Space Flight Center (MSFC), and used a government/industry team consisting of Hercules Aerospace Corporation, Aerotherm Corporation, United Technology Chemical Systems Division, Thiokol Corporation and MSFC personnel to study the feasibility of simulating the combustion species, temperatures and flow fields of a conventional solid rocket motor (SRM) with a versatile simulator system. The SSRCS design is based on hybrid rocket motor principles. The simulator uses a solid fuel and a gaseous oxidizer. Verification of the feasibility of a SSRCS system as a test bed was completed using flow field and system analyses, as well as empirical test data. A total of 27 hot firings of a subscale SSRCS motor were conducted at MSFC. Testing of the Small-scale SSRCS program was completed in October 1992. This paper, a compilation of reports from the above team members and additional analysis of the instrumentation results, will discuss the final results of the analyses and test programs.

Materials processing in space programs tasks. [NASA research tasks

NASA Technical Reports Server (NTRS)

Pentecost, E.

1981-01-01

Active research tasks as of the end of fiscal year 1981 of the materials processing in space program, NASA Office of Space and Terrestrial Applications are summarized to provide an overview of the program scope for managers and scientists in industry, university, and government communities. The program, its history, strategy, and overall goal are described the organizational structures and people involved are identified and a list of recent publications is given for each research task. Four categories: Crystal Growth; Solidification of Metals, Alloys, and Composites; Fluids, Transports, and Chemical Processes, and Ultrahigh Vacuum and Containerless Processing Technologies are used to group the tasks. Some tasks are placed in more than one category to insure complete coverage of each category.

Repository-Based Software Engineering Program: Working Program Management Plan

NASA Technical Reports Server (NTRS)

1993-01-01

Repository-Based Software Engineering Program (RBSE) is a National Aeronautics and Space Administration (NASA) sponsored program dedicated to introducing and supporting common, effective approaches to software engineering practices. The process of conceiving, designing, building, and maintaining software systems by using existing software assets that are stored in a specialized operational reuse library or repository, accessible to system designers, is the foundation of the program. In addition to operating a software repository, RBSE promotes (1) software engineering technology transfer, (2) academic and instructional support of reuse programs, (3) the use of common software engineering standards and practices, (4) software reuse technology research, and (5) interoperability between reuse libraries. This Program Management Plan (PMP) is intended to communicate program goals and objectives, describe major work areas, and define a management report and control process. This process will assist the Program Manager, University of Houston at Clear Lake (UHCL) in tracking work progress and describing major program activities to NASA management. The goal of this PMP is to make managing the RBSE program a relatively easy process that improves the work of all team members. The PMP describes work areas addressed and work efforts being accomplished by the program; however, it is not intended as a complete description of the program. Its focus is on providing management tools and management processes for monitoring, evaluating, and administering the program; and it includes schedules for charting milestones and deliveries of program products. The PMP was developed by soliciting and obtaining guidance from appropriate program participants, analyzing program management guidance, and reviewing related program management documents.

Horizontal technology helps spark Louisiana`s Austin chalk trend

DOE Office of Scientific and Technical Information (OSTI.GOV)

Koen, A.D.

1996-04-29

A handful of companies paced by some of the most active operators in the US are pressing the limits of horizontal technology to ramp up Cretaceous Austin chalk exploration and development (E and D) across Louisiana. Companies find applications in Louisiana for lessons learned drilling horizontal wells to produce chalk intervals in Texas in Giddings, Pearsall, and Brookeland fields. Continuing advances in horizontal well technology are helping operators deal with deeper, hotter reservoirs in more complex geological settings that typify the chalk in Louisiana. Better horizontal drilling, completion, formation evaluation, and stimulation techniques have enabled operators to produce oil andmore » gas from formations previously thought to be uneconomical. Most of the improved capabilities stem from better horizontal tools. Horizontal drilling breakthroughs include dual powered mud motors and retrievable whipstocks, key links in the ability to drill wells with more than one horizontal lateral. Better geosteering tools have enabled operators to maintain horizontal wellbores in desired intervals by signaling bit positions downhole while drilling. This paper reviews the technology and provides a historical perspective on the various drilling programs which have been completed in this trend. It also makes predictions on future drilling successes.« less

Continued Development and Improvement of Pneumatic Heavy Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert J. Englar

2005-07-15

The objective of this applied research effort led by Georgia Tech Research Institute is the application of pneumatic aerodynamic technology previously developed and patented by us to the design of an appropriate Heavy Vehicle (HV) tractor-trailer configuration, and experimental confirmation of this pneumatic configuration's improved aerodynamic characteristics. In Phases I to IV of our previous DOE program (Reference 1), GTRI has developed, patented, wind-tunnel tested and road-tested blown aerodynamic devices for Pneumatic Heavy Vehicles (PHVs) and Pneumatic Sports Utility Vehicles (PSUVs). To further advance these pneumatic technologies towards HV and SUV applications, additional Phase V tasks were included in themore » first year of a continuing DOE program (Reference 2). Based on the results of the Phase IV full-scale test programs, these Phase V tasks extended the application of pneumatic aerodynamics to include: further economy and performance improvements; increased aerodynamic stability and control; and safety of operation of Pneumatic HVs. Continued development of a Pneumatic SUV was also conducted during the Phase V program. Phase V was completed in July, 2003; its positive results towards development and confirmation of this pneumatic technology are reported in References 3 and 4. The current Phase VI of this program was incrementally funded by DOE in order to continue this technology development towards a second fuel economy test on the Pneumatic Heavy Vehicle. The objectives of this current Phase VI research and development effort (Ref. 5) fall into two categories: (1) develop improved pneumatic aerodynamic technology and configurations on smaller-scale models of the advanced Pneumatic Heavy Vehicle (PHV); and based on these findings, (2) redesign, modify, and re-test the modified full-scale PHV test vehicle. This second objective includes conduct of an on-road preliminary road test of this configuration to prepare it for a second series of SAE Type-U fuel economy evaluations, as described in Ref. 5. Both objectives are based on the pneumatic technology already developed and confirmed for DOE OHVT/OAAT in Phases I-V. This new Phase VI effort was initiated by contract amendment to the Phase V effort using carryover FY02 funds. This were conducted under a new and distinct project number, GTRI Project A-6935, separate from the Phase I-IV program. However, the two programs are closely integrated, and thus Phase VI continues with the previous program and goals.« less

Advanced Instrumentation, Information, and Control Systems Technologies Pathway: FY 2016 External Review

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thomas, Kenneth David; Hallbert, Bruce Perry

2016-11-01

This report describes an External Review conducted by the LWRS Program Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway to solicit feedback on the topics and results of the ongoing II&C research program. This review was held in conjunction with the Nuclear Energy Institute (NEI) Digital I&C Working Group meeting that was held at Idaho National Laboratory (INL) on August 9-10, 2016. Given the opportunity to visit INL and see the pathway research projects, NEI agreed that the Working Group would serve as the External Review panel for the purpose of obtaining expert input on the value and timingmore » of the research projects. This consisted of demonstrations in the Human Systems Simulation Laboratory followed by presentations on the II&C research program in general as well as the five technology development areas. Following the meeting, the presentations were sent to each of the attendees so they could review them in more detail and refer to them in completing the feedback form. Follow-up activities were conducted with the attendees following the meeting to obtain the completed feedback forms. A total of 13 forms were returned. The feedback forms were reviewed by the pathway to compile the data and comments received, which are documented in the report. In all, the feedback provided by the External Review participants is taken to be a strong endorsement of the types of projects being conducted by the pathway, the value they hold for the nuclear plants, and the general timing of need. The feedback aligns well with the priorities, levels of efforts allocated for the research projects, and project schedules. The feedback also represents realistic observations on the practicality of some aspects of implementing these technologies. In some cases, the participants provided thoughtful challenges to certain assumptions in the formulation of the technologies or in deployment plans. These deserve further review and revision of plans if warranted. The pathway will take all of the feedback and address the open issues that have been identified by the participants. This includes 11 actionable items for follow up by the II&C Pathway.« less

Demonstration of improved vehicle fuel efficiency through innovative tire design, materials, and weight reduction technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donley, Tim

2014-12-31

Cooper completed an investigation into new tire technology using a novel approach to develop and demonstrate a new class of fuel efficient tires using innovative materials technology and tire design concepts. The objective of this work was to develop a new class of fuel efficient tires, focused on the “replacement market” that would improve overall passenger vehicle fuel efficiency by 3% while lowering the overall tire weight by 20%. A further goal of this project was to accomplish the objectives while maintaining the traction and wear performance of the control tire. This program was designed to build on what hasmore » already been accomplished in the tire industry for rolling resistance based on the knowledge and general principles developed over the past decades. Cooper’s CS4 (Figure #1) premium broadline tire was chosen as the control tire for this program. For Cooper to achieve the goals of this project, the development of multiple technologies was necessary. Six technologies were chosen that are not currently being used in the tire industry at any significant level, but that showed excellent prospects in preliminary research. This development was divided into two phases. Phase I investigated six different technologies as individual components. Phase II then took a holistic approach by combining all the technologies that showed positive results during phase one development.« less

Fire-protection research for energy technology: Fy 80 year end report

NASA Astrophysics Data System (ADS)

Hasegawa, H. K.; Alvares, N. J.; Lipska, A. E.; Ford, H.; Priante, S.; Beason, D. G.

1981-05-01

This continuing research program was initiated in order to advance fire protection strategies for Fusion Energy Experiments (FEE). The program expanded to encompass other forms of energy research. Accomplishments for fiscal year 1980 were: finalization of the fault-free analysis of the Shiva fire management system; development of a second-generation, fire-growth analysis using an alternate model and new LLNL combustion dynamics data; improvements of techniques for chemical smoke aerosol analysis; development and test of a simple method to assess the corrosive potential of smoke aerosols; development of an initial aerosol dilution system; completion of primary small-scale tests for measurements of the dynamics of cable fires; finalization of primary survey format for non-LLNL energy technology facilities; and studies of fire dynamics and aerosol production from electrical insulation and computer tape cassettes.

Status of Mirror Technology for the Next Generation Space Telescope

NASA Astrophysics Data System (ADS)

Jacobson, D. N.

2000-10-01

The NGST primary mirror is anticipated to be a segmented deployable optic with segment size being in the range of 1-3m depending on the details of the architecture. Over the past 4 years the NGST program has initiated and implemented an aggressive lightweight cryogenic mirror technology program. The program was designed to challenge and excite the optical community in reaching a new standard in production of lightweight optics. The goal was to develop optics at < 15 kg/m2, operational at ~ 40K and meeting the overall NGST observatory requirement for diffraction limited performance at 2 microns. In order to meet the NGST needs, technology efforts were initiated to investigate and develop mirrors in a variety of materials, which held promise for the program. The basic technology approaches have initially targeted the production of large mirrors in the 1.2-2.0m diameter range (or side-to-side distance in the case of hexagonal optics). Although this size may not be the final size of an NGST primary mirror segment, it was felt that a 1.2-2.0m optic would be of sufficient size to understand the mirror material and fabrication processes which drive the cost and schedule of mirror production. The ultimate goals of the technology program are both to demonstrate mirrors meeting the NGST performance requirements, and to establish cost and schedule credibility for producing and implementing the mirrors for the NGST flight system. Establishing cost and schedule credibility is essential to NGST which is a cost capped mission, with past program experience demonstrating that the optics will be a large portion of the total cost of the program. The first two years of the program were dedicated to understanding the various applicable materials, funding those materials to various levels of maturity and implementing the first large mirror procurement, the NGST Mirror System Demonstrator (NMSD), in order to establish a benchmark for the state-of-the-art in lightweight optics and to establish credibility that the goals of NGST could be achieved. The past two years of the program has seen major steps in the development of several mirror materials, which not only might have NGST applicability but could also support other programs for other customers. Additionally, a second large mirror procurement, the Advanced Mirror System Demonstrator (AMSD), has been implemented providing a focal point to complete the mirror technology development and lead ultimately to the production of mirrors that will fly on NEXUS (NGST flight experimentand) and NGST. This talk will focus on a status of the mirror technology developed over the past 4 years on the NGST program.

METC Clean Coal Technology status -- 1995 update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carpenter, L.K.

1995-06-01

The Department of Energy (DOE) Clean Coal Technology (CCT) Program is assisting the private sector by funding demonstration programs to validate that CCT technologies are a low-risk, environmentally attractive, cost-competitive option for utility and industrial users. Since 1987, DOE has awarded 45 CCT projects worth a total value of $7 billion (including more than $2.3 billion of DOE funding). Within the CCT Program, the Morgantown Energy Technology Center (METC) is responsible for 17 advanced power generation systems and major industrial applications. METC is an active partner in advancement of these technologies via direct CCT funding and via close cooperation andmore » coordination of internal and external research and development activities. By their nature, METC projects are typically 6-10 years in duration and, in some cases, very complex in nature. However, as a result of strong commercial partnerships, progress in the development and commercialization of major utility and industrial projects has, and will continue to occur. It is believed that advanced power generation systems and industrial applications are on the brink of commercial deployment. A status of METC CCT activities will be presented. Two projects have completed their operational phase, operations are underway at one project (two others are in the latter stages of construction/shakedown), four projects are in construction, six restructured. Also, present a snapshot of development activities that are an integral part of the advancement of these CCT initiatives will be presented.« less

ExMC Technology Watch

NASA Technical Reports Server (NTRS)

Krihak, M.; Watkins, S.; Shaw, T.

2014-01-01

The Technology Watch (Tech Watch) project is directed by the NASA Human Research Program's (HRP) Exploration Medical Capability (ExMC) element, and primarily focuses on ExMC technology gaps. The project coordinates the efforts of multiple NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion, and advance NASA's goal to provide a safe and healthy environment for human exploration. In fiscal year 2013, the Tech Watch project maintained student project activity aimed at specific ExMC gaps, completed the gap report review cycle for all gaps through a maturated gap report review process, and revised the ExMC Tech Watch Sharepoint site for enhanced data content and organization. Through site visits, internships and promotions via aerospace journals, several student projects were initiated and completed this past year. Upon project completion, the students presented their results via telecom or WebEx to the ExMC Element as a whole. The upcoming year will continue to forge strategic alliances and student projects in the interest of technology and knowledge gap closure. Through the population of Sharepoint with technologies assessed by the gap owners, the database expansion will develop a more comprehensive technology set for each gap. By placing such data in Sharepoint, the gap report updates in fiscal year 2014 are anticipated to be streamlined since the evaluated technologies will be readily available to the gap owners in a sortable archive, and may be simply exported into the final gap report presentation

ExMC Technology Watch

NASA Technical Reports Server (NTRS)

Krihak, M.; Watkins, S.; Shaw, T.

2014-01-01

The Technology Watch (Tech Watch) project is directed by the NASA Human Research Programs (HRP) Exploration Medical Capability (ExMC) element, and primarily focuses on ExMC technology gaps. The project coordinates the efforts of multiple NASA centers, including the Johnson Space Center (JSC), Glenn Research Center (GRC), Ames Research Center (ARC), and the Langley Research Center (LaRC). The objective of Tech Watch is to identify emerging, high-impact technologies that augment current NASA HRP technology development efforts. Identifying such technologies accelerates the development of medical care and research capabilities for the mitigation of potential health issues encountered during human space exploration missions. The aim of this process is to leverage technologies developed by academia, industry and other government agencies and to identify the effective utilization of NASA resources to maximize the HRP return on investment. The establishment of collaborations with these entities is beneficial to technology development, assessment and/or insertion, and advance NASAs goal to provide a safe and healthy environment for human exploration. In fiscal year 2013, the Tech Watch project maintained student project activity aimed at specific ExMC gaps, completed the gap report review cycle for all gaps through a maturated gap report review process, and revised the ExMC Tech Watch Sharepoint site for enhanced data content and organization. Through site visits, internships and promotions via aerospace journals, several student projects were initiated and completed this past year. Upon project completion, the students presented their results via telecom or WebEx to the ExMC Element as a whole. The upcoming year will continue to forge strategic alliances and student projects in the interest of technology and knowledge gap closure. Through the population of Sharepoint with technologies assessed by the gap owners, the database expansion will develop a more comprehensive technology set for each gap. By placing such data in Sharepoint, the gap report updates in fiscal year 2014 are anticipated to be streamlined since the evaluated technologies will be readily available to the gap owners in a sortable archive, and may be simply exported into the final gap report presentation.